The portfolio of renewable energy sources for achieving the three E policy goals

International Nuclear Information System (INIS)

Shen, Yung-Chi; Chou, Chiyang James; Lin, Grace T.R.

2011-01-01

Renewable energy is considered by many policy-makers to contribute to achieving at least three major policy goals: the energy goal, the environmental goal, and the economic goal (3E goals). As an innovation-oriented island country with scarce natural resources, Taiwan announced the Sustainable Energy Policy Principles in 2008 that stated that Taiwan's renewable energy policy should accomplish the 3E goals. Several studies point out that specific renewable energy policy goals lead to specific renewable energy sources and technologies because each type of renewable energy has different features. In order to achieve the renewable energy policy goals, this research aims to examine how different policy goals lead to corresponding renewable energy sources. The relative importance of each goal is evaluated by using analytic hierarchy process (AHP). The weight of each policy goal is adjusted separately to construct policy scenarios by the sensitivity analysis. According to the results, non-pumped storage hydropower, wind energy, and solar energy are three sources that could meet the three policy goals at the same time. -- Highlights: →This study aims to propose a portfolio of renewable energy sources to achieve energy, environmental, and economic policy goals for Taiwan. →Non-pumped storage hydropower performs best to achieve energy and environmental goals. →Wind energy performs well to accomplish environmental goal. →Solar energy is the most preferred alternative to achieve economic goal. →The portfolio of non-pumped storage hydropower, wind energy, and solar energy can accomplish the three E policy goals at the same time.

10 CFR 435.7 - Water used to achieve energy efficiency. [Reserved

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Water used to achieve energy efficiency. [Reserved] 435.7 Section 435.7 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS FOR NEW FEDERAL LOW-RISE RESIDENTIAL BUILDINGS Mandatory Energy Efficiency Standards for Federal Low-Rise Residential...

12 New England Organizations Honored for Outstanding Achievements in Energy Efficiency

Science.gov (United States)

EPA and the U.S. Department of Energy (DOE) are honoring 12 New England businesses and organizations for their commitment to saving energy, saving money, and protecting the environment through superior energy efficiency achievements.

Overview of Commercial Building Partnerships in Higher Education

Energy Technology Data Exchange (ETDEWEB)

Schatz, Glenn [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

2013-03-01

Higher education uses less energy per square foot than most commercial building sectors. However, higher education campuses house energy-intensive laboratories and data centers that may spend more than this average; laboratories, in particular, are disproportionately represented in the higher education sector. The Commercial Building Partnership (CBP), a public/private, cost-shared program sponsored by the U.S. Department of Energy (DOE), paired selected commercial building owners and operators with representatives of DOE, its national laboratories, and private-sector technical experts. These teams explored energy-saving measures across building systems–including some considered too costly or technologically challenging–and used advanced energy modeling to achieve peak whole-building performance. Modeling results were then included in new construction or retrofit designs to achieve significant energy reductions.

Achieving Energy Efficiency in Accordance with Bioclimatic Architecture Principles

Science.gov (United States)

Bajcinovci, Bujar; Jerliu, Florina

2016-12-01

By using our natural resources, and through inefficient use of energy, we produce much waste that can be recycled as a useful resource, which further contributes to climate change. This study aims to address energy effective bioclimatic architecture principles, by which we can achieve a potential energy savings, estimated at thirty-three per cent, mainly through environmentally affordable reconstruction, resulting in low negative impact on the environment. The study presented in this paper investigated the Ulpiana neighbourhood of Prishtina City, focusing on urban design challenges, energy efficiency and air pollution issues. The research methods consist of empirical observations through the urban spatial area using a comparative method, in order to receive clearer data and information research is conducted within Ulpiana's urban blocks, shapes of architectural structures, with the objective focusing on bioclimatic features in terms of the morphology and microclimate of Ulpiana. Energy supply plays a key role in the economic development of any country, hence, bioclimatic design principles for sustainable architecture and energy efficiency, present an evolutive integrated strategy for achieving efficiency and healthier conditions for Kosovar communities. Conceptual findings indicate that with the integrated design strategy: energy efficiency, and passive bioclimatic principles will result in a bond of complex interrelation between nature, architecture, and community. The aim of this study is to promote structured organized actions to be taken in Prishtina, and Kosovo, which will result in improved energy efficiency in all sectors, and particularly in the residential housing sector.

Achieving Energy Efficiency in Accordance with Bioclimatic Architecture Principles

Directory of Open Access Journals (Sweden)

Bajcinovci Bujar

2016-12-01

Full Text Available By using our natural resources, and through inefficient use of energy, we produce much waste that can be recycled as a useful resource, which further contributes to climate change. This study aims to address energy effective bioclimatic architecture principles, by which we can achieve a potential energy savings, estimated at thirty-three per cent, mainly through environmentally affordable reconstruction, resulting in low negative impact on the environment. The study presented in this paper investigated the Ulpiana neighbourhood of Prishtina City, focusing on urban design challenges, energy efficiency and air pollution issues. The research methods consist of empirical observations through the urban spatial area using a comparative method, in order to receive clearer data and information research is conducted within Ulpiana’s urban blocks, shapes of architectural structures, with the objective focusing on bioclimatic features in terms of the morphology and microclimate of Ulpiana. Energy supply plays a key role in the economic development of any country, hence, bioclimatic design principles for sustainable architecture and energy efficiency, present an evolutive integrated strategy for achieving efficiency and healthier conditions for Kosovar communities. Conceptual findings indicate that with the integrated design strategy: energy efficiency, and passive bioclimatic principles will result in a bond of complex interrelation between nature, architecture, and community. The aim of this study is to promote structured organized actions to be taken in Prishtina, and Kosovo, which will result in improved energy efficiency in all sectors, and particularly in the residential housing sector.

World energy outlook: how to share the efforts to be achieved by 2030?

International Nuclear Information System (INIS)

2008-01-01

This conference was organized a month after the publication by the International Energy Agency (IEA) of the 2007 World Energy Outlook (WEO) study. The energy situation at that time was marked by the repercussions on the environment and on the security of supplies in relation with the accelerated development of China and India. This document gathers the transparencies of the two presentations given at this conference. The first presentation by Fatih Birol, Chief Economist at the IEA, is entitled 'World Energy Outlook 2007: China and India Insights'. It presents the Cooperation with China's National Development and Reform Commission (NDRC) and Energy Research Institute (ERI), and with India's Energy and Resources Institute (TERI) for the establishment of energy scenarios. Then the different scenarios are reviewed: Reference Scenario, Alternative Policy Scenario and 450 Stabilisation Case, High Growth Scenario (China/India). Finally, a full global update of projections (all scenarios) is presented and the impact of China and India on global economy, energy markets and environment is analyzed. The conclusions are as follows: - Global energy system is on an increasingly unsustainable path; - China and India are transforming the global energy system by their sheer size; - Challenge for all countries is to achieve transition to a more secure, lower carbon energy system; - New policies now under consideration would make a major contribution; - Next 10 years are critical (The pace of capacity additions will be most rapid, Technology will be 'locked-in' for decades, Growing tightness in oil and gas markets); - Challenge is global so solutions must be global. The second presentation by Jean-Charles Hourcade (CIRED) is entitled 'The WEO 2007 A few comments about the Emerging Giants... and us'. The presentation focusses on 4 points: - What implications of higher growth in the Asian Giants on the world economy through higher pressure on energy resources; - Economic questions

Predicting early academic achievement: The role of higher-versus lower-order personality traits

Directory of Open Access Journals (Sweden)

Zupančič Maja

2011-01-01

Full Text Available The study explored the role of children’s (N = 193 individual differences and parental characteristics at the beginning of the first year of schooling in predicting students’ attainment of academic standards at the end of the year. Special attention was paid to children’s personality as perceived by the teachers’ assistants. Along with parents’ education, parenting practices and first-graders’ cognitive ability, the incremental predictive power of children’s higher-order (robust personality traits was compared to the contribution of lower-order (specific traits in explaining academic achievement. The specific traits provided a somewhat more accurate prediction than the robust traits. Unique contributions of maternal authoritative parenting, children’s cognitive ability, and personality to academic achievement were established. The ratings of first-graders’ conscientiousness (a higher-order trait improved the prediction of academic achievement based on parenting and cognitive ability by 12%, whereas assistant teacher’s perceived children’s intelligence and low antagonism (lower-order traits improved the prediction by 17%.

Achieving sustainable biomass conversion to energy and bio products

International Nuclear Information System (INIS)

Matteson, G. C.

2009-01-01

The present effort in to maximize biomass conversion-to-energy and bio products is examined in terms of sustain ability practices. New goals, standards in practice, measurements and certification are needed for the sustainable biomass industry. Sustainable practices produce biomass energy and products in a manner that is secure, renewable, accessible locally, and pollution free. To achieve sustainable conversion, some new goals are proposed. (Author)

Leveraging Quality Improvement to Achieve Student Learning Assessment Success in Higher Education

Science.gov (United States)

Glenn, Nancy Gentry

2009-01-01

Mounting pressure for transformational change in higher education driven by technology, globalization, competition, funding shortages, and increased emphasis on accountability necessitates that universities implement reforms to demonstrate responsiveness to all stakeholders and to provide evidence of student achievement. In the face of the demand…

Workshop on CEBAF at higher energies

International Nuclear Information System (INIS)

Isgur, N.; Stoler, P.

1994-04-01

Since the current parameters of CEBAF were defined almost a decade ago, there has been a remarkably fruitful evolution of our picture of the behavior of strongly interacting matter that apparently could be addressed by CEBAF at higher energies. Favorable technical developments coupled with foresight in initial laboratory planning have now made it feasible to consider approximately doubling CEBAF's current design energy of 4 GeV to approach 10 GeV at rather modest cost. The purpose of the workshop, sponsored by the CEBAF User Group, was to begin to develop the next phase of CEBAF's program by giving the entire community the opportunity to participate in defining the future of our field, and in particular the physics accessible with an upgraded CEBAF energy. It is intended that this report mark the first step toward an ultimate goal of defining a physics program that will form the basis for an upgrade of CEBAF. The report begins with a brief overview of the workshop's conclusions. Its body consists of sections corresponding to the workshop's Working Groups on Hadron Spectroscopy and Production, High Q 2 Form Factors and Exclusive Reactions, Inclusive and Semi-Inclusive Processes, and Hadrons in the Nuclear Medium. Each section begins with the working group summaries and is followed by associated plenary talks summarizing the outstanding physics issues addressable by an upgrade, which are in turn followed by individual contributions presenting specific physics programs. An appendix describes capabilities of CEBAF's current experimental equipment at higher energies; another appendix lists workshop participants. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database

Workshop on CEBAF at higher energies

Energy Technology Data Exchange (ETDEWEB)

Isgur, N.; Stoler, P. [eds.

1994-04-01

Since the current parameters of CEBAF were defined almost a decade ago, there has been a remarkably fruitful evolution of our picture of the behavior of strongly interacting matter that apparently could be addressed by CEBAF at higher energies. Favorable technical developments coupled with foresight in initial laboratory planning have now made it feasible to consider approximately doubling CEBAF`s current design energy of 4 GeV to approach 10 GeV at rather modest cost. The purpose of the workshop, sponsored by the CEBAF User Group, was to begin to develop the next phase of CEBAF`s program by giving the entire community the opportunity to participate in defining the future of our field, and in particular the physics accessible with an upgraded CEBAF energy. It is intended that this report mark the first step toward an ultimate goal of defining a physics program that will form the basis for an upgrade of CEBAF. The report begins with a brief overview of the workshop`s conclusions. Its body consists of sections corresponding to the workshop`s Working Groups on Hadron Spectroscopy and Production, High Q{sup 2} Form Factors and Exclusive Reactions, Inclusive and Semi-Inclusive Processes, and Hadrons in the Nuclear Medium. Each section begins with the working group summaries and is followed by associated plenary talks summarizing the outstanding physics issues addressable by an upgrade, which are in turn followed by individual contributions presenting specific physics programs. An appendix describes capabilities of CEBAF`s current experimental equipment at higher energies; another appendix lists workshop participants. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

Does higher quality early child care promote low-income children's math and reading achievement in middle childhood?

Science.gov (United States)

Dearing, Eric; McCartney, Kathleen; Taylor, Beck A

2009-01-01

Higher quality child care during infancy and early childhood (6-54 months of age) was examined as a moderator of associations between family economic status and children's (N = 1,364) math and reading achievement in middle childhood (4.5-11 years of age). Low income was less strongly predictive of underachievement for children who had been in higher quality care than for those who had not. Consistent with a cognitive advantage hypothesis, higher quality care appeared to promote achievement indirectly via early school readiness skills. Family characteristics associated with selection into child care also appeared to promote the achievement of low-income children, but the moderating effect of higher quality care per se remained evident when controlling for selection using covariates and propensity scores.

Columbia, Missouri: Using Energy Data to Reduce Emissions and Achieve Low-Income Household Energy Savings (City Energy: From Data to Decisions)

Energy Technology Data Exchange (ETDEWEB)

Office of Strategic Programs, Strategic Priorities and Impact Analysis Team

2017-09-29

This fact sheet "Columbia, Missouri: Using Energy Data to Reduce Emissions and Achieve Low-Income Household Energy Savings" explains how the City of Columbia used data from the U.S. Department of Energy's Cities Leading through Energy Analysis and Planning (Cities-LEAP) and the State and Local Energy Data (SLED) programs to inform its city energy planning. It is one of ten fact sheets in the "City Energy: From Data to Decisions" series.

Higher order energy transfer. Quantum electrodynamical calculations and graphical representation

International Nuclear Information System (INIS)

Jenkins, R.D.

2000-01-01

In Chapter 1, a novel method of calculating quantum electrodynamic amplitudes is formulated using combinatorial theory. This technique is used throughout instead of conventional time-ordered methods. A variety of hyperspaces are discussed to highlight isomorphism between a number of A generalisation of Pascal's triangle is shown to be beneficial in determining the form of hyperspace graphs. Chapter 2 describes laser assisted resonance energy transfer (LARET), a higher order perturbative contribution to the well-known process resonance energy transfer, accommodating an off resonance auxiliary laser field to stimulate the migration. Interest focuses on energy exchanges between two uncorrelated molecular species, as in a system where molecules are randomly oriented. Both phase-weighted and standard isotropic averaging are required for the calculations. Results are discussed in terms of a laser intensity-dependent mechanism. Identifying the applied field regime where LARET should prove experimentally significant, transfer rate increases of up to 30% are predicted. General results for three-center energy transfer are elucidated in chapter 3. Cooperative and accretive mechanistic pathways are identified with theory formulated to elicit their role in a variety of energy transfer phenomena and their relative dominance. In multichromophoric the interplay of such factors is analysed with regard to molecular architectures. The alignments and magnitudes of donor and acceptor transition moments and polarisabilities prove to have profound effects on achievable pooling efficiency for linear configurations. Also optimum configurations are offered. In ionic lattices, although both mechanisms play significant roles in pooling and cutting processes, only the accretive is responsible for sensitisation. The local, microscopic level results are used to gauge the lattice response, encompassing concentration and structural effects. (author)

Factor Analysis on Criteria Affecting Lean Retrofit for Energy Efficient Initiatives in Higher Learning Institution Buildings

Directory of Open Access Journals (Sweden)

Abidin Nur IzieAdiana

2017-01-01

Full Text Available The expansion of Higher Learning Institution (HLI is a global concerns on energy demand due to campus act like a small city. Intensive mode of operation of a building is correlated to the energy utilization. Improvement in the current energy efficiency is crucial effort to minimize the environmental effect through minimisation of energy in operation by retrofitting and upgrade the existing building system or components to be more efficient. Basically, there are three recommended steps for the improvement known as lean initiatives, green technology and clean energy in response to becoming zero energy solutions for building. The deliberation of this paper is aimed to highlight the criteria affecting in retrofitting of existing building in HLI with lean initiatives in order to achieve energy efficiency and reduction of energy comsumption. Attention is devoted to reviewing the lean energy retrofitting initiatives criteria for daylighting (side lighting, daylighting (skylight and glazing. The questionnaire survey was employed and distributed to the architects who has an expertise in green building design. Factor analysis was adopted as a method of analysis by using Principal Component with Varimax Rotation. The result is presented through summarizing the sub-criteria according to its importance with a factor loading 0.50 and above. The result found that majority of the criteria developed achieved the significant factor loading value and in accordance with the protocal of analysis. In conclusion the results from analysis of this paper assists the stakeholders in assessing the significant criteria based on the desired lean energy retrofitting initiatives and also provides a huge contribution for future planning improvement in existing buildings to become an energy efficient building.

Validity of Assessment and Recognition of Non-Formal and Informal Learning Achievements in Higher Education

Science.gov (United States)

Kaminskiene, Lina; Stasiunaitiene, Egle

2013-01-01

The article identifies the validity of assessment of non-formal and informal learning achievements (NILA) as one of the key factors for encouraging further development of the process of assessing and recognising non-formal and informal learning achievements in higher education. The authors analyse why the recognition of non-formal and informal…

Energy Design Advice Scheme (EDAS): operations and achievements 1992-1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-09-01

The Energy Design Advice Scheme (EDAS) was launched in 1992 under the DTI's Passive Solar Programme to help improve the energy performance of the UK's building stock. It aimed to do this through direct advice and guidance on passive solar design and energy efficient technologies and processes given to the designers of real building projects. Furthermore, the scheme aimed to raise the awareness and take-up of definitive guidance produced under government programmes such as the Passive Solar programme and the Energy Efficiency Best Practice programme. A target energy saving worth Pound 19.3m was set to be achieved by the end of the scheme. This energy saving is equivalent to a reduction in carbon dioxide emission of 220,000 tonnes per year. (author)

Higher renewable energy integration into the existing energy system of Finland – Is there any maximum limit?

International Nuclear Information System (INIS)

Zakeri, Behnam; Syri, Sanna; Rinne, Samuli

2015-01-01

Finland is to increase the share of RES (renewable energy sources) up to 38% in final energy consumption by 2020. While benefiting from local biomass resources Finnish energy system is deemed to achieve this goal, increasing the share of other intermittent renewables is under development, namely wind power and solar energy. Yet the maximum flexibility of the existing energy system in integration of renewable energy is not investigated, which is an important step before undertaking new renewable energy obligations. This study aims at filling this gap by hourly analysis and comprehensive modeling of the energy system including electricity, heat, and transportation, by employing EnergyPLAN tool. Focusing on technical and economic implications, we assess the maximum potential of different RESs separately (including bioenergy, hydropower, wind power, solar heating and PV, and heat pumps), as well as an optimal mix of different technologies. Furthermore, we propose a new index for assessing the maximum flexibility of energy systems in absorbing variable renewable energy. The results demonstrate that wind energy can be harvested at maximum levels of 18–19% of annual power demand (approx. 16 TWh/a), without major enhancements in the flexibility of energy infrastructure. With today's energy demand, the maximum feasible renewable energy for Finland is around 44–50% by an optimal mix of different technologies, which promises 35% reduction in carbon emissions from 2012's level. Moreover, Finnish energy system is flexible to augment the share of renewables in gross electricity consumption up to 69–72%, at maximum. Higher shares of RES calls for lower energy consumption (energy efficiency) and more flexibility in balancing energy supply and consumption (e.g. by energy storage). - Highlights: • By hourly analysis, we model the whole energy system of Finland. • With existing energy infrastructure, RES (renewable energy sources) in primary energy cannot go beyond 50%. �

Can the future, world-wide energy supply be achieved without nuclear energy?

International Nuclear Information System (INIS)

Kugeler, K.

1995-01-01

In the future the world-wide energy demand is going to increase considerably. The use of nuclear energy will continuously grow if the demand of climate researchers for a reduction of the world-wide CO 2 emission is fulfilled and if the possible contribution of regenerative energy sources is assessed realistically. In the future a world-wide use of nuclear energy will be realised according to even higher safety standards. The modification of the German Atom Law, which determines the limitation of damage caused to the reactor plant for future reactors fulfils this demand. The efforts in the field of nuclear technical development will concentrate on the proof of the required safety properties. (orig.) [de

Development of weightage for criteria affecting in retrofitting of existing building in Higher Learning Institution with clean energy initiatives

Science.gov (United States)

Izie Adiana Abidin, Nur; Aminuddin, Eeydzah; Zakaria, Rozana; Mazzuana Shamsuddin, Siti; Sahamir, Shaza Rina; Shahzaib, Jam; Nafis Abas, Darul

2018-04-01

Campus university building is the Higher Learning Institution (HLI) involves complex activities and operations, conserving the energy has become paramount important. There are several efforts taken by universities to improve its current energy use such as policy development, education, and adaption of energy conservation solution through retrofitting. This paper aims to highlight the importance of the criteria affecting in retrofitting of existing buildings with clean energy in order to achieve zero energy balance in buildings. The focus is given to the development of criteria for solar photovoltaic (solar PV), wind turbines and small-scale hydropower. A questionnaire survey was employed and distributed to the green building expert practitioner. Factor Analysis, Factor Score, and Weightage Factor were adapted as a method of analysis in order to produce the final result with weightage output for prioritization and ranking of the relevant criteria. The result performed assists to provide the stakeholders an overview of the important criteria that should be considered especially during the decision making to retrofit the existing buildings with clean energy resources. The criteria developed are also to establish a structured decision-making process and to ensure the selection of the decision or alternatives achieve the desired outcome.

Development of nuclear models for higher energy calculations

International Nuclear Information System (INIS)

Bozoian, M.; Siciliano, E.R.; Smith, R.D.

1988-01-01

Two nuclear models for higher energy calculations have been developed in the regions of high and low energy transfer, respectively. In the former, a relativistic hybrid-type preequilibrium model is compared with data ranging from 60 to 800 MeV. Also, the GNASH exciton preequilibrium-model code with higher energy improvements is compared with data at 200 and 318 MeV. In the region of low energy transfer, nucleon-nucleus scattering is predominately a direct reaction involving quasi-elastic collisions with one or more target nucleons. We discuss various aspects of quasi-elastic scattering which are important in understanding features of cross sections and spin observables. These include (1) contributions from multi-step processes; (2) damping of the continuum response from 2p-2h excitations; (3) the ''optimal'' choice of frame in which to evaluate the nucleon-nucleon amplitudes; and (4) the effect of optical and spin-orbit distortions, which are included in a model based on the RPA the DWIA and the eikonal approximation. 33 refs., 15 figs

Achievable rate maximization for decode-and-forward MIMO-OFDM networks with an energy harvesting relay.

Science.gov (United States)

Du, Guanyao; Yu, Jianjun

2016-01-01

This paper investigates the system achievable rate for the multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) system with an energy harvesting (EH) relay. Firstly we propose two protocols, time switching-based decode-and-forward relaying (TSDFR) and a flexible power splitting-based DF relaying (PSDFR) protocol by considering two practical receiver architectures, to enable the simultaneous information processing and energy harvesting at the relay. In PSDFR protocol, we introduce a temporal parameter to describe the time division pattern between the two phases which makes the protocol more flexible and general. In order to explore the system performance limit, we discuss the system achievable rate theoretically and formulate two optimization problems for the proposed protocols to maximize the system achievable rate. Since the problems are non-convex and difficult to solve, we first analyze them theoretically and get some explicit results, then design an augmented Lagrangian penalty function (ALPF) based algorithm for them. Numerical results are provided to validate the accuracy of our analytical results and the effectiveness of the proposed ALPF algorithm. It is shown that, PSDFR outperforms TSDFR to achieve higher achievable rate in such a MIMO-OFDM relaying system. Besides, we also investigate the impacts of the relay location, the number of antennas and the number of subcarriers on the system performance. Specifically, it is shown that, the relay position greatly affects the system performance of both protocols, and relatively worse achievable rate is achieved when the relay is placed in the middle of the source and the destination. This is different from the MIMO-OFDM DF relaying system without EH. Moreover, the optimal factor which indicates the time division pattern between the two phases in the PSDFR protocol is always above 0.8, which means that, the common division of the total transmission time into two equal phases in

Energy Design Advice Scheme (EDAS): operations and achievements 1992-1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-09-01

The Energy Design Advice Scheme (EDAS) was launched in 1992 under the DTI's Passive Solar Programme to help improve the energy performance of the UK's building stock. It aimed to do this through direct advice and guidance on passive solar design and energy efficient technologies and processes given to the designers of real building projects. Furthermore, the scheme aimed to raise the awareness and take-up of definitive guidance produced under government programmes such as the Passive Solar programme and the Energy Efficiency Best Practice programme. A target energy saving worth Pound 19.3m was set to be achieved by the end of the scheme. This energy saving is equivalent to a reduction in carbon dioxide emission of 220,000 tonnes per year. (author)

Energy efficiency interventions in UK higher education institutions

International Nuclear Information System (INIS)

Altan, Hasim

2010-01-01

This paper provides an insight into energy efficiency interventions studies, focusing on issues arising in UK higher education institutions (HEIs) in particular. Based on a review of the context for energy efficiency and carbon reduction programmes in the UK and the trends in higher education sector, existing external and internal policies and initiatives and their relevant issues are extensively discussed. To explore the efficacy of some internal intervention strategies, such as technical, non-technical and management interventions, a survey was conducted among UK higher education institutions between February and April 2008. Consultation responses show that there are a relatively high percentage of institutions (83%) that have embarked on both technical and non-technical initiatives, which is a demonstration to the joined-up approach in such area. Major barriers for intervention studies are also identified, including lack of methodology, non-clarity of energy demand and consumption issues, difficulty in establishing assessment boundaries, problems with regards to indices and their effectiveness and so on. Besides establishing clear targets for carbon reductions within the sector, it is concluded that it is important to develop systems for effectively measuring and evaluating the impact of different policies, regulations and schemes in the future as the first step to explore. - Research Highlights: → The research provides an insight into energy efficiency interventions studies, focusing particularly on issues arising in UK higher education institutions (HEIs). → Based on a review of the context for energy efficiency and carbon reduction programmes in the UK and the trends in higher education sector, existing external and internal policies and initiatives, and their relevant issues are extensively discussed. → To explore the efficacy of some internal intervention strategies, such as technical, non-technical and management interventions, a survey was conducted

Is Equal Access to Higher Education in South Asia and Sub-Saharan Africa Achievable by 2030?

Science.gov (United States)

Ilie, Sonia; Rose, Pauline

2016-01-01

Higher education is back in the spotlight, with post-2015 sustainable development goals emphasising equality of access. In this paper, we highlight the long distance still to travel to achieve the goal of equal access to higher education for all, with a focus on poorer countries which tend to have lower levels of enrolment in higher education.…

Supplementing an energy adequate, higher protein diet with protein does not enhance fat-free mass restoration after short-term severe negative energy balance.

Science.gov (United States)

Berryman, C E; Sepowitz, J J; McClung, H L; Lieberman, H R; Farina, E K; McClung, J P; Ferrando, A A; Pasiakos, S M

2017-06-01

Negative energy balance during military operations can be severe and result in significant reductions in fat-free mass (FFM). Consuming supplemental high-quality protein following such military operations may accelerate restoration of FFM. Body composition (dual-energy X-ray absorptiometry) and whole body protein turnover (single-pool [ 15 N]alanine method) were determined before (PRE) and after 7 days (POST) of severe negative energy balance during military training in 63 male US Marines (means ± SD, 25 ± 3 yr, 84 ± 9 kg). After POST measures were collected, volunteers were randomized to receive higher protein (HIGH: 1,103 kcal/day, 133 g protein/day), moderate protein (MOD: 974 kcal/day, 84 g protein/day), or carbohydrate-based low protein control (CON: 1,042 kcal/day, 7 g protein/day) supplements, in addition to a self-selected, ad libitum diet, for the 27-day intervention (REFED). Measurements were repeated POST-REFED. POST total body mass (TBM; -5.8 ± 1.0 kg, -7.0%), FFM (-3.1 ± 1.6 kg, -4.7%), and net protein balance (-1.7 ± 1.1 g protein·kg -1 ·day -1 ) were lower and proteolysis (1.1 ± 1.9 g protein·kg -1 ·day -1 ) was higher compared with PRE ( P energy (4,498 ± 725 kcal/day). All volunteers, independent of group assignment, achieved positive net protein balance (0.4 ± 1.0 g protein·kg -1 ·day -1 ) and gained TBM (5.9 ± 1.7 kg, 7.8%) and FFM (3.6 ± 1.8 kg, 5.7%) POST-REFED compared with POST ( P energy-adequate, higher protein diets with additional protein may not be necessary to restore FFM after short-term severe negative energy balance. NEW & NOTEWORTHY This article demonstrates 1 ) the majority of physiological decrements incurred during military training (e.g., total and fat-free mass loss), with the exception of net protein balance, resolve and return to pretraining values after 27 days and 2 ) protein supplementation, in addition to an ad libitum, higher protein (~2.0 g·kg -1 ·day -1 ), energy adequate diet, is not necessary to

Key Questions for Achieving EU Emission Reductions without Abandoning Other Energy Goals

International Nuclear Information System (INIS)

Stang, G.

2014-01-01

What considerations must be addressed to ensure that efforts to achieve the EU's new 2030 emissions and renewables targets are compatible with the other energy goals of the EU and its member states: energy security, and energy affordability? How should these other energy goals be addressed when pursuing energy efficiency improvements, upgrading electricity systems to handle different renewable energy sources, and developing policies to reduce overall CO2 emissions? Markets have been defined as being central to achieving all of Europe's energy goals - both the creation of an EU internal energy market and the use of the Emissions Trading System (ETS) to allow a market for managing a portion of the continent's greenhouse gas emissions. But once these markets are in place and operational, there will still be great variances among the goals, instruments, and level of market integration available for the different countries and regions of Europe. Choosing the most cost effective mechanisms for pursuing the new goals will require effective use of the flexibility that is available - an improved ETS, tradable national targets for non-ETS emissions, and a rapidly widening array of cost-effective renewable energy options. Sufficient use of this flexibility should facilitate the flow of energy investments toward energy system improvements where there is low-hanging fruit - anywhere in the continent - without requiring that local or continental energy security goals be sacrificed. (author).

Daily energy balance in growth hormone receptor/binding protein (GHR -/-) gene-disrupted mice is achieved through an increase in dark-phase energy efficiency.

Science.gov (United States)

Longo, Kenneth A; Berryman, Darlene E; Kelder, Bruce; Charoenthongtrakul, Soratree; Distefano, Peter S; Geddes, Brad J; Kopchick, John J

2010-02-01

The goal of this study was to examine factors that contribute to energy balance in female GHR -/- mice. We measured energy intake, energy expenditure (EE), fuel utilization, body mass (M(b)) changes and physical activity in 17month-old female GHR -/- mice and their age-matched wild type littermates. The GHR -/- mice were smaller, consumed more food per unit M(b), had greater EE per unit M(b) and had an increase in 24-h EE/M(b) that was similar to the increase in their surface-area-to-volume ratio. Locomotor activity (LMA) was reduced in the GHR -/- mice, but the energetic cost associated with their LMA was greater than in wild type controls. Furthermore, M(b) and LMA were independent explanatory covariates of most of the variance in EE, and when adjusted for M(b) and LMA, the GHR -/- mice had higher EE during both the light and dark phases of the daily cycle. Respiratory quotient was lower in GHR -/- mice during the light phase, which indicated a greater utilization of lipid relative to carbohydrate in these mice. Additionally, GHR -/- mice had higher ratios of caloric intake to EE at several intervals during the dark phase, and this effect was greater and more sustained in the final 3h of the dark phase. Therefore, we conclude that GHR -/- mice are able to overcome the substantial energetic challenges of dwarfism through several mechanisms that promote stable M(b). Relative to wild type mice, the GHR -/- mice consumed more calories per unit M(b), which offset the disproportionate increase in their daily energy expenditure. While GHR -/- mice oxidized a greater proportion of lipid during the light phase in order to meet their energy requirements, they achieved greater energy efficiency and storage during the dark phase through a combination of higher energy consumption and lower LMA. Copyright 2009 Elsevier Ltd. All rights reserved.

Higher energy dissociative electron attachment cross sections in sulfur dioxide

International Nuclear Information System (INIS)

Kurepa, M.; Pejcev, V.; Cadez, I.

2000-01-01

Experimental results of total electron attachment cross sections are presented with, for comparison, two additional sets of data, those of Orient and Srivastava and of Spyrou et al.. Both were normalized to present values of the first attachment peak at 4,6 eV, in order to show more clearly differences in cross section curve shapes. In fact, data of Orient and Srivastava are larger that the present ones for a factor of 2,82; while those of Spyrou et al. are higher only for 3,70 %. Both these sets of data, as well as those by Cadez et al., cover an incident electron energy range 3,40 - 9,40 eV. Electron attachment processes at energies higher that 9,40 eV have been in fact detected and measured in the same set of experiments that led to former publication of lower energy attachment processes by Cadez et al.. At that time in none of experiments, that could distinguished ionic species formed in dissociation attachment processes, was a sign of ions at incident electron energies exceeding 9,40 eV. That caused our ignorance toward processes detected and measured at higher incident electron energies, mainly since they were at least one order of magnitude lower that the two peaks at 4,6 eV and 7,3 eV, respectively. Without additional experiments, that include mass analysis of ionic species formed in dissociative electron attachment processes, it is not possible to give any sound explanation to causes of peaks at energies higher that 8,0 eV

Achieving CO2 Emissions Reduction Goals with Energy Infrastructure Projects

International Nuclear Information System (INIS)

Eberlinc, M.; Medved, K.; Simic, J.

2013-01-01

The EU has set its short-term goals in the Europe 2020 Strategy (20% of CO 2 emissions reduction, 20% increase in energy efficiency, 20% share of renewables in final energy). The analyses show that the EU Member States in general are on the right track of achieving these goals; they are even ahead (including Slovenia). But setting long-term goals by 2050 is a tougher challenge. Achieving CO 2 emissions reduction goes hand in hand with increasing the share of renewables and strategically planning the projects, which include exploiting the potential of renewable sources of energy (e.g. hydropower). In Slovenia, the expected share of hydropower in electricity production from large HPPs in the share of renewables by 2030 is 1/3. The paper includes a presentation of a hydro power plants project on the middle Sava river in Slovenia and its specifics (influenced by the expansion of the Natura 2000 protected sites and on the other hand by the changes in the Environment Protection Law, which implements the EU Industrial Emissions Directive and the ETS Directive). Studies show the importance of the HPPs in terms of CO 2 emissions reduction. The main conclusion of the paper shows the importance of energy infrastructure projects, which contribute to on the one hand the CO 2 emissions reduction and on the other the increase of renewables.(author)

Achieving the Texas Higher Education Vision

National Research Council Canada - National Science Library

Benjamin, Roger

2000-01-01

The Texas higher education system faces severe challenges in responding to the twin demands placed on it by economic growth and by the increasing problems of access to higher education that many Texans experience...

Reducing barriers to energy efficiency in the German higher education sector. Final report

Energy Technology Data Exchange (ETDEWEB)

Schleich, J.; Boede, U.

2000-12-01

This report describes the empirical research into barriers to energy efficiency in the German higher education (HE) sector. It is one of nine such reports in the BARRIERS project. The report contains description and analysis of six case studies of energy management in German universities. The results are analysed using the theoretical framework developed for the BARRIERS project (Sorrell et al., 2000). The report also provides brief recommendations on how these barriers to the rational use of energy (RUE) may be overcome and how energy efficiency within the sector may be improved. The results of the study for the higher education sector in Germany are summarised in this executive summary under the following headings: - Characterising the higher education sector; - Case studies of energy management in the German higher education sector; - Evidence of barriers in the German higher education sector; - The role of energy service companies in the higher education sector; - Policy implications. (orig.)

Reducing barriers to energy efficiency in the German higher education sector. Executive summary

Energy Technology Data Exchange (ETDEWEB)

Schleich, J.; Boede, U.

2000-12-01

This report describes the empirical research into barriers to energy efficiency in the German higher education (HE) sector. It is one of nine such reports in the BARRIERS project. The report contains description and analysis of six case studies of energy management in German universities. The results are analysed using the theoretical framework developed for the BARRIERS project (Sorrell et al., 2000). The report also provides brief recommendations on how these barriers to the rational use of energy (RUE) may be overcome and how energy efficiency within the sector may be improved. The results of the study for the higher education sector in Germany are summarised in this executive summary under the following headings: - Characterising the higher education sector; - Case studies of energy management in the German higher education sector; - Evidence of barriers in the German higher education sector; - The role of energy service companies in the higher education sector; - Policy implications. (orig.)

Luminosity Optimization for a Higher-Energy LHC

CERN Document Server

Dominguez, O

2011-01-01

A Higher-Energy Large Hadron Collider (HE-LHC) is an option to further push the energy frontier of particle physics beyond the present LHC. A beam energy of 16.5 TeV would require 20 T dipole magnets in the existing LHC tunnel, which should be compared with 7 TeV and 8.33 T for the nominal LHC. Since the synchrotron radiation power increases with the fourth power of the energy, radiation damping becomes significant for the HE-LHC. It calls for transverse and longitudinal emittance control vis-a-vis beam-beam interaction and Landau damping. The heat load from synchrotron radiation, gas scattering, and electron cloud also increases with respect to the LHC. In this paper we discuss the proposed HE-LHC beam parameters; the time evolution of luminosity, beam-beam tune shifts, and emittances during an HE-LHC store; the expected heat load; and luminosity optimization schemes for both round and flat beams.

Parity nonconservation in proton scattering at higher energies

International Nuclear Information System (INIS)

Mischke, R.E.

1993-01-01

A parity-nonconservation experiment in the scattering of longitudinally-polarized protons at an incident proton momentum of 6 GeV/c is examined. This experiment indicates a sharp rise with energy of the total cross section correlated with proton helicity that was unexpected. This energy dependence is due to the strong part of the interaction and may indicate the role of a diquark component in the nucleon. New experiments at higher energies are needed to confirm such a model. Future experiment can benefit from an analysis of sources of systematic error that have been encountered in the experiment discussed here

Achieving energy efficiency through behaviour change: what does it take?

Energy Technology Data Exchange (ETDEWEB)

Barbu, A.-D. [European Environment Agency (EEA), Copenhagen (Denmark); Griffiths, N.; Morton, G. [Ricardo-AEA (United Kingdom)

2013-04-15

On October 2012, the European Union adopted the Energy Efficiency Directive in reaction to the fact that EU Member States were not on track to reduce primary energy consumption by 20 % by 2020. The implementation of this directive, and other policies that have been adopted in recent years, will require a change in consumer behaviour and energy consumption practices. Within this context, and related to on-going debates on the same subject, a new European Environment Agency (EEA) report argues that correctly navigating the interface between policymaking and human behaviour is key to achieving sustained reductions in energy consumption. As such, the report provides timely and reliable information and analysis to those involved in designing policy measures to reduce energy consumption which target the end consumer. A growing body of evidence in academic literature demonstrates that there is potential for energy savings due to measures targeting behaviour. There is, however, one issue that has not been covered by previous studies, and which the EEA report directly addresses, namely the distinction between consumer behaviour and consumption practices. Most recent academic literature argues that it is the consumption practices themselves that need careful scrutiny as they tend to lock consumers into patterns that are more and more energy intensive and they involve a wide range of actors. From the energy efficiency policy design perspective, this is relevant because these actors need to be involved from the outset of the policy process. The report also argues that a whole range of changes need to take place in the way energy markets function and are regulated in order to enable the consumer to actively engage with these markets. The report however does not include a discussion on the socio-economic implications of these structural changes. During 2013, the EEA will launch a survey via social media and its own website to follow up on conclusions of the report. The aim will

Daily energy balance in growth hormone receptor/binding protein (GHR−/−) gene-disrupted mice is achieved through an increase in dark-phase energy efficiency

Science.gov (United States)

Longo, Kenneth A.; Berryman, Darlene E.; Kelder, Bruce; Charoenthongtrakul, Soratree; DiStefano, Peter S.; Geddes, Brad J.; Kopchick, John

2009-01-01

The goal of this study was to examine factors that contribute to energy balance in female GHR −/− mice. We measured energy intake, energy expenditure (EE), fuel utilization, body mass (Mb) changes and physical activity in 17 month-old female GHR −/− mice and their age-matched wild type littermates. The GHR −/− mice were smaller, consumed more food per unit Mb, had greater EE per unit Mb and had an increase in 24-h EE/Mb that was similar to the increase in their surface-area-to-volume ratio. Locomotor activity (LMA) was reduced in the GHR −/− mice, but the energetic cost associated with their LMA was greater than in wild type controls. Furthermore, Mb and LMA were independent explanatory covariates of most of the variance in EE, and when adjusted for Mb and LMA, the GHR −/− mice had higher EE during both the light and dark phases of the daily cycle. Respiratory quotient was lower in GHR −/− mice during the light phase, which indicated a greater utilization of lipid relative to carbohydrate in these mice. Additionally, GHR −/− mice had higher ratios of caloric intake to EE at several intervals during the dark phase, and this effect was greater and more sustained in the final three hours of the dark phase. Therefore, we conclude that GHR −/− mice are able to overcome the substantial energetic challenges of dwarfism through several mechanisms that promote stable Mb. Relative to wild type mice, the GHR −/− mice consumed more calories per unit Mb, which offset the disproportionate increase in their daily energy expenditure. While GHR −/− mice oxidized a greater proportion of lipid during the light phase in order to meet their energy requirements, they achieved greater energy efficiency and storage during the dark phase through a combination of higher energy consumption and lower LMA. PMID:19747867

Sector review of UK higher education energy consumption

International Nuclear Information System (INIS)

Ward, Ian; Ogbonna, Anthony; Altan, Hasim

2008-01-01

The UK education and education-related services are said to be one of the fastest-growing export earners in recent years and are known to have had significant impacts at the micro- and macro-levels of the UK. This review looks at energy consumption of this fast growing sector. It concentrates on the energy consumption patterns of the funded higher education institutions in the UK. The findings indicate energy consumption in the sector has been on the increase in the 6 years up to 2006; rising by about 2.7% above the 2001 consumption levels. This increase is, however, not evenly spread across the entire sector. The high energy-consuming institutions appear to be increasing their net consumption, relative to other institutions. Gross internal area, staff and research student full-time equivalent were found to have highest correlation with energy consumption across the sector and may be used as proxy indicators for energy consumption as well as the targets of interventions

Achieving low latency and energy consumption by 5G TDD mode optimization

DEFF Research Database (Denmark)

Lähetkangas, Eeva; Pajukoski, Kari; Vihriälä, Jaakko

2014-01-01

and discussing on the consequent frame length limits. We then provide a description on how the achieved short TDD latency can further be utilized to enable remarkably low energy consumption. A numerical analysis comparing the battery life time of the suggested 5G TDD air interface and LTE is provided, showing......The target for a new 5G radio access technology is to support multi-Gbps and ms latency connectivity simultaneously at noticeably lower energy consumption and cost compared to the existing 4G technologies, such as LTE-Advanced. Extremely short air interface latency is required to achieve...... these requirements in a TDD-based local area network. In this paper, we discuss how the required short TDD latency can be achieved and further utilized in 5G physical air interface. First, we investigate the enablers and limits of TDD latency by analyzing the performance of OFDM in different channel environments...

Energy market reform in Europe. European energy and climate policies: achievements and challenges to 2020 and beyond

International Nuclear Information System (INIS)

2015-01-01

Since the 1992 Earth Summit in Rio and the negotiation of the United Nations Framework Convention on Climate Change (UNFCCC), the European Union has consistently been at the forefront of global action to combat climate change, leading the world to a low-carbon economy. The EU has set itself greenhouse gas emission targets designed to produce an almost carbon-free economy by 2050 in order to make a major contribution to limiting the global temperature increase by the end of the century to 2 deg. C, compared to the pre-industrial average. As an interim step on the way to 2050, EU leaders in March 2007 set a number of ambitious climate and energy targets known as the '20-20-20 targets by 2020' or the 3 x 20 policy. In this, the EU committed to: - A 20% reduction in EU greenhouse gas emissions from 1990 levels; - Raising the share of EU energy consumption produced from renewable resources to 20%; and - A 20% improvement in the EU's energy efficiency. This 3 x 20 package is a part of a wider European energy strategy that aims at enhancing: - Sustainability; - Competitiveness and affordability; and - Security of supply. The EU energy and climate package has attracted criticism in the last few years, as each day brought more evidence that the policy measures had numerous unexpected, or unintended impacts on the energy markets and industry: an excess of intermittent sources of electricity causing disruption for grid operators, surplus electricity resulting in a price collapse of the wholesale electricity market, electricity price increase at retail level, exit of gas from the fuels for power generation and the advent of coal as an electricity price-setter... At the same time, it has also become evident that EU policy has failed to solve the existing EU energy imbalances in general. Ironically, after years of huge investments aimed at achieving the ambitious policy targets, a number of the objectives still seem to be a long way away. Indeed some may not even

Parity nonconservation in proton scattering at higher energies

International Nuclear Information System (INIS)

Mischke, R.E.

1987-01-01

Parity-nonconservation experiments in the scattering of longitudinally-polarized protons at incident proton momenta of 1.5 GeV/c and 6 GeV/c are examined. These experiments indicate a change with energy of the total cross section correlated with proton helicity that was unexpected. This energy dependence is due to the strong part of the interaction and may indicate the role of a diquark component in the nucleon. New experiments at higher energies are needed to confirm such a model. Future experiments can benefit from an analysis of sources of systematic error that have been encountered in the experiments discussed here. 43 refs., 3 figs

Sustainable energy for all. Technical report of task force 1 in support of the objective to achieve universal access to modern energy services by 2030

Energy Technology Data Exchange (ETDEWEB)

Birol, Fatih [International Energy Agency, Paris (France); Brew-Hammond, Abeeku [University of Science and Technology (Ghana

2012-04-15

The UN Secretary General established the Sustainable Energy for All initiative in order to guide and support efforts to achieve universal access to modern energy, rapidly increase energy efficiency, and expand the use of renewable energies. Task forces were formed involving prominent energy leaders and experts from business, government, academia and civil society worldwide. The goal of the Task Forces is to inform the implementation of the initiative by identifying challenges and opportunities for achieving its objectives. This report contains the findings of Task Force One which is dedicated to the objective of achieving universal access to modern energy services by 2030. The report shows that universal energy access can be realized by 2030 with strong, focused actions set within a coordinated framework.

Pathways to achieve universal household access to modern energy by 2030

Science.gov (United States)

Pachauri, Shonali; van Ruijven, Bas J.; Nagai, Yu; Riahi, Keywan; van Vuuren, Detlef P.; Brew-Hammond, Abeeku; Nakicenovic, Nebojsa

2013-06-01

A lack of access to modern energy impacts health and welfare and impedes development for billions of people. Growing concern about these impacts has mobilized the international community to set new targets for universal modern energy access. However, analyses exploring pathways to achieve these targets and quantifying the potential costs and benefits are limited. Here, we use two modelling frameworks to analyse investments and consequences of achieving total rural electrification and universal access to clean-combusting cooking fuels and stoves by 2030. Our analysis indicates that these targets can be achieved with additional investment of US200565-86 billion per year until 2030 combined with dedicated policies. Only a combination of policies that lowers costs for modern cooking fuels and stoves, along with more rapid electrification, can enable the realization of these goals. Our results demonstrate the critical importance of accounting for varying demands and affordability across heterogeneous household groups in both analysis and policy setting. While the investments required are significant, improved access to modern cooking fuels alone can avert between 0.6 and 1.8 million premature deaths annually in 2030 and enhance wellbeing substantially.

Pathways to achieve universal household access to modern energy by 2030

International Nuclear Information System (INIS)

Pachauri, Shonali; Nagai, Yu; Riahi, Keywan; Nakicenovic, Nebojsa; Van Ruijven, Bas J; Van Vuuren, Detlef P; Brew-Hammond, Abeeku

2013-01-01

A lack of access to modern energy impacts health and welfare and impedes development for billions of people. Growing concern about these impacts has mobilized the international community to set new targets for universal modern energy access. However, analyses exploring pathways to achieve these targets and quantifying the potential costs and benefits are limited. Here, we use two modelling frameworks to analyse investments and consequences of achieving total rural electrification and universal access to clean-combusting cooking fuels and stoves by 2030. Our analysis indicates that these targets can be achieved with additional investment of US$ 2005 65–86 billion per year until 2030 combined with dedicated policies. Only a combination of policies that lowers costs for modern cooking fuels and stoves, along with more rapid electrification, can enable the realization of these goals. Our results demonstrate the critical importance of accounting for varying demands and affordability across heterogeneous household groups in both analysis and policy setting. While the investments required are significant, improved access to modern cooking fuels alone can avert between 0.6 and 1.8 million premature deaths annually in 2030 and enhance wellbeing substantially. (letter)

Future-Proofed Energy Design Approaches for Achieving Low-Energy Homes: Enhancing the Code for Sustainable Homes

Directory of Open Access Journals (Sweden)

Maria Christina Georgiadou

2014-09-01

Full Text Available Under the label “future-proofing”, this paper examines the temporal component of sustainable construction as an unexplored, yet fundamental ingredient in the delivery of low-energy domestic buildings. The overarching aim is to explore the integration of future-proofed design approaches into current mainstream construction practice in the UK, focusing on the example of the Code for Sustainable Homes (CSH tool. Regulation has been the most significant driver for achieving the 2016 zero-carbon target; however, there is a gap between the appeal for future-proofing and the lack of effective implementation by building professionals. Even though the CSH was introduced as the leading tool to drive the “step-change” required for achieving zero-carbon new homes by 2016 and the single national standard to encourage energy performance beyond current statutory minima, it lacks assessment criteria that explicitly promote a futures perspective. Based on an established conceptual model of future-proofing, 14 interviews with building practitioners in the UK were conducted to identify the “feasible” and “reasonably feasible” future-proofed design approaches with the potential to enhance the “Energy and CO2 Emissions” category of the CSH. The findings are categorised under three key aspects; namely: coverage of sustainability issues; adopting lifecycle thinking; and accommodating risks and uncertainties and seek to inform industry practice and policy-making in relation to building energy performance.

Elastic form factors at higher CEBAF energies

Energy Technology Data Exchange (ETDEWEB)

Petratos, G.G. [Kent State Univ., OH (United States)

1994-04-01

The prospects for elastic scattering from few body systems with higher beam energies at CEBAF is presented. The deuteron and{sup 3}He elastic structure functions A(Q{sup 2}) can be measured at sufficiently high momentum transfers to study the transition between the conventional meson-nucleon and the constituent quark-gluon descriptions. Possible improvements in the proton magnetic form factor data are also presented.

What do physicists expect from higher energies

International Nuclear Information System (INIS)

Van Khove, L.

1979-01-01

The last main discoveries of the physics of high energies are enumerated to show the perspectives of construction of future accelerators. They are the construction of the hadron structure, which basis consists of quarks and gluons; the discovery of weak interaction neutral currents; the asymptotics violation in the strong interaction behaviour; the discovery of specific impacts when the secondary particles are generated with great transverse momenta (> or approximately 3 GeV/c); the discovery of a new quantum number (a charm) and the evidence of the charmed particles discovery. The necessity of construction of new accelerators and storage rings at higher energies and the perspectiveness of international cooperation for solving such essential problems of the physics of high energies as confirmation or negation of intermediate bozon existence, the continuation of study of weak interaction properties in the band of the transferred momenta up to 50-100 GeV/c, the spectroscopy of new hadrons, etc. are shown

Implementation of energy-saving policies in China: How local governments assisted industrial enterprises in achieving energy-saving targets

International Nuclear Information System (INIS)

Zhao, Xiaofan; Li, Huimin; Wu, Liang; Qi, Ye

2014-01-01

Local governments have replaced the national ministries that are in charge of various industries to become the primary implementer of energy-saving policies in China since 2000. This paper employs a case study-based approach to demonstrate the significance of local governments’ policy measures in assisting industrial enterprises with energy-saving activities in China. Based on the longitudinal case of the Jasmine Thermal Electric Power Company, this paper hypothesizes that sub-national governments have played a major role in implementing energy-saving policies in China since the 11th Five-year-plan period. A wide range of provincial and municipal agencies collaborated in implementing five types of policy measures – informational policy, skill building, improved enforcement of central directives, price adjustment, and funding – that reduced barriers to energy saving and motivated active pursuit of energy-saving activities at industrial enterprises. The case study demonstrates how an enterprise and local governments work together to achieve the enterprise's energy-saving target. The authors will investigate the hypothesis of this paper in the context of multiple case studies that they plan to undertake in the future. - Highlights: • We employ a case study-based approach to study policy implementation in China. • Local governments have played a major role in implementing energy-saving policies. • Local public agencies collaborated in implementing five types of policy measures. • Local policy measures reduced barriers to energy saving at industrial enterprises. • Enterprises and local governments work together to achieve energy-saving targets

Achieving 50% Energy Savings in New Schools, Advanced Energy Design Guides: K-12 Schools (Brochure)

Energy Technology Data Exchange (ETDEWEB)

2014-09-01

This fact sheet summarizes recommendations for designing elementary, middle, and high school buildings that will result in 50% less energy use than conventional new schools built to minimum code requirements. The recommendations are drawn from the Advanced Energy Design Guide for K-12 School Buildings, an ASHRAE publication that provides comprehensive recommendations for designing low-energy-use school buildings (see sidebar). Designed as a stand-alone document, this fact sheet provides key principles and a set of prescriptive design recommendations appropriate for smaller schools with insufficient budgets to fully implement best practices for integrated design and optimized performance. The recommendations have undergone a thorough analysis and review process through ASHRAE, and have been deemed the best combination of measures to achieve 50% savings in the greatest number of schools.

Investigating the Relationships between Approaches to Learning, Learner Identities and Academic Achievement in Higher Education

Science.gov (United States)

Herrmann, K. J.; Bager-Elsborg, A.; McCune, V.

2017-01-01

This paper considers relationships between approaches to learning, learner identities, self-efficacy beliefs and academic achievement in higher education. In addition to already established survey instruments, a new scale, "subject area affinity," was developed. The scale explores the extent to which students identify with their area of…

Energy thrift and improved performance achieved through novel railway brake discs

International Nuclear Information System (INIS)

Tirovic, Marko

2009-01-01

A disc with radial vanes and circumferential pillars proves to be successful in operation and achieves energy efficiency improvements compared with those of traditional design. Cooling characteristics of this novel design are practically identical to the disc with tangential vanes but the equivalent aerodynamic (air pumping) losses are approximately 50% less. It is shown that these reductions in pumping losses can lead to substantial energy savings in train operations. When developing new designs and/or comparing different railway disc designs, the proposed disc cooling to aerodynamic efficiency ratio (η v ) was found to be a very useful parameter to assess. This 'efficiency ratio' - a ratio of convective power dissipation to aerodynamic power losses can help in achieving adequate balance of cooling efficiency and aerodynamic losses to suit particular application. The use of CFD is of enormous benefit in generating discs that fulfil these demanding requirements, with the spin rig being exceptionally useful for experimental work

Challenges and Opportunities To Achieve 50% Energy Savings in Homes. National Laboratory White Papers

Energy Technology Data Exchange (ETDEWEB)

Bianchi, Marcus V.A. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2011-07-01

This report summarizes the key opportunities, gaps, and barriers identified by researchers from four national laboratories (Lawrence Berkeley National Laboratory, National Renewable Energy Laboratory, Oak Ridge National Laboratory, and Pacific Northwest National Laboratory) that must be addressed to achieve the longer term 50% saving goal for Building America to ensure coordination with the Building America industry teams who are focusing their research on systems to achieve the near-term 30% savings goal. Although new construction was included, the focus of the effort was on deep energy retrofits of existing homes.

Guideline for Achieving a Target Share of Renewable Energy in Final Energy Consumption in Slovenia Until 2020

International Nuclear Information System (INIS)

Brecevic, Dj.

2009-01-01

European parliament's and Council for energy usage from renewable sources promotion's directive proposal determines acceptation of National action plan for every member state. General national goal for renewable energy share in final consumption in year 2020, defined in proposal, is 25 % energy from renewable sources in final energy consumption. Paper presents plan for renewable energy sources usage in electricity production and activities, which will be necessary to be held by organizations, which are carriers of energy activities, for building new capacities or rebuilding existing ones for electricity production from renewable energy sources. Purpose of plan is additional 3.000 GWh electricity production in year 2020 in comparison with today's electricity production from renewable energy sources. Accepted goal will be obligatory for organizations as carriers of energy activities for their social responsibility for obligations fulfillment and determined goals achievement. Report represents necessary steps that state has to make to reach bigger interest of investors for renewable energy investments and special attention is stressed on completion of regulation with goal to create suitable platform for future investors.(author).

Measurement of p({gamma}, p){pi}{sup 0} at higher energies

Energy Technology Data Exchange (ETDEWEB)

Gilman, R. [Rutgers Univ., Piscataway, NJ (United States)]|[Continuous Electron Beam Accelerator Facility, Newport News, VA (United States); Holt, R.J. [Univ. of Illinois, Urbana, IL (United States)]|[Argonne National Laboratory, IL (United States); Rutt, P. [Univ. of Georgia, Athens (United States)]|[Rutgers Univ., Piscataway, NJ (United States)

1994-04-01

The applicability of QCD inspired reaction models vs. nuclear reaction models for exclusive reactions at high beam energy is a topic of current interest. Polarization measurements provide a sensitive test of the reaction dynamics, but no polarization measurements exist for photoreactions in the scaling regime, where pQCD might be applicable. With higher energy beam at CEBAF, it will become possible to extend the range of measurements in pion photoproduction well into the scaling regime and to better determine the underlying reaction mechanism. A set of measurements for existing equipment at CEBAF with 6-8 GeV beam is described, as well as desirable equipment modifications for improving these measurements at the higher energies.

Distributed renewable energies for off-grid communities strategies and technologies toward achieving sustainability in energy generation and supply

CERN Document Server

El Bassam, Nasir; Schlichting, Marcia

2012-01-01

Energy is directly related to the most critical economic and social issues which affect sustainable development such as mobility, food production, environmental quality, regional and global security issues. Two-thirds of the new demand will come from developing nations, with China accounting for 30%. Without adequate attention to the critical importance of energy to all these aspects, the global, social, economic and environmental goals of sustainability cannot be achieved. Indeed the magnitude of change needed is immense, fundamental and directly related to the energy produced and consumed na

Strategies for achieving healthy energy balance among African Americans in the Mississippi Delta.

Science.gov (United States)

Parham, Groesbeck P; Scarinci, Isabel C

2007-10-01

Low-income African Americans who live in rural areas of the Deep South are particularly vulnerable to diseases associated with unhealthy energy imbalance. The Centers for Disease Control and Prevention (CDC) has suggested various physical activity strategies to achieve healthy energy balance. Our objective was to conduct formal, open-ended discussions with low-income African Americans in the Mississippi Delta to determine 1) their dietary habits and physical activity levels, 2) their attitudes toward CDC's suggested physical activity strategies, and 3) their suggestions on how to achieve CDC's strategies within their own environment. A qualitative method (focus groups) was used to conduct the study during 2005. Prestudy meetings were held with African American lay health workers to formulate a focus group topic guide, establish inclusion criteria for focus group participants, select meeting sites and times, and determine group segmentation guidelines. Focus groups were divided into two phases. All discussions and focus group meetings were held in community centers within African American neighborhoods in the Mississippi Delta and were led by trained African American moderators. Phase I focus groups identified the following themes: overeating, low self-esteem, low income, lack of physical exercise, unhealthy methods of food preparation, a poor working definition of healthy energy balance, and superficial knowledge of strategies for achieving healthy energy balance. Phase 2 focus groups identified a preference for social support-based strategies for increasing physical activity levels. Energy balance strategies targeting low-income, rural African Americans in the Deep South may be more effective if they emphasize social interaction at the community and family levels and incorporate the concept of community volunteerism.

SU-F-T-85: Energy Modulated Electron Postmastectomy Unreconstructed (PU) Chest Wall (CW) Irradiation Technique to Achieve Heart Sparing

Energy Technology Data Exchange (ETDEWEB)

Hong, L; Ballangrud, A; Mechalakos, J [Memorial Sloan-Kettering Cancer Center, New York, NY (United States); McCormick, B [Memerial Sloan-Kettering Cancer Center, New York, NY (United States)

2016-06-15

Purpose: For left-sided PU patients requiring CW and nodal irradiation, sometimes partial wide tangents (PWT) are not feasible due to abnormal chest wall contour or heart position close to the anterior chest wall or unusual wide excision scar. We developed an energy modulated electron chest wall irradiation technique that will achieve heart sparing. Methods: Ten left-sided PU patients were selected for this dosimetry study. If PWT were used, the amount of the ipsilateral lung would be ranged 3.4 to 4.4 cm, and the amount of heart would be ranged 1.3 to 3.8 cm. We used electron paired fields that matched on the skin to achieve dose conformity to the chest wall. The enface electron fields were designed at extended SSD from a single isocenter and gantry angle with different energy beams using different cutout. Lower energy was used in the central chest wall part and higher energy was used in the periphery of the chest wall. Bolus was used for the electron fields to ensure adequate skin dose coverage. The electron fields were matched to the photon supra-clavicle field in the superior region. Daily field junctions were used to feather the match lines between all the fields. Target volumes and normal tissues were drawn according to institutional protocols. Prescription dose was 2Gy per fraction for a total 50Gy. Dose calculations were done with Eclipse EMC-11031 for Electron and AAA-11031 for photons. Results: Six patients were planned using 6/9MeV, three using 9/12MeV and one 6/12MeV. Target volumes achieved adequate coverage. For heart, V30Gy, V20Gy and Mean Dose were 0.6%±0.6%, 2.7%±1.7%, and 3.0Gy±0.8Gy respectively. For ipsilateral lung, V50Gy, V20Gy, V10Gy and V5Gy were 0.9%±1.1%, 34.3%±5.1%, 51.6%±6.3% and 64.1%±7.5% respectively. Conclusion: For left-sided PU patients with unusual anatomy, energy modulated electron CW irradiation technique can achieve heart sparing with acceptable lung dose.

Obesity-related eating behaviors are associated with higher food energy density and higher consumption of sugary and alcoholic beverages: a cross-sectional study.

Directory of Open Access Journals (Sweden)

Maritza Muñoz-Pareja

Full Text Available Obesity-related eating behaviors (OREB are associated with higher energy intake. Total energy intake can be decomposed into the following constituents: food portion size, food energy density, the number of eating occasions, and the energy intake from energy-rich beverages. To our knowledge this is the first study to examine the association between the OREB and these energy components.Data were taken from a cross-sectional study conducted in 2008-2010 among 11,546 individuals representative of the Spanish population aged ≥ 18 years. Information was obtained on the following 8 self-reported OREB: not planning how much to eat before sitting down, eating precooked/canned food or snacks bought at vending machines or at fast-food restaurants, not choosing low-energy foods, not removing visible fat from meat or skin from chicken, and eating while watching TV. Usual diet was assessed with a validated diet history. Analyses were performed with linear regression with adjustment for main confounders.Compared to individuals with ≤ 1 OREB, those with ≥ 5 OREB had a higher food energy density (β 0.10; 95% CI 0.08, 0.12 kcal/g/day; p-trend<0.001 and a higher consumption of sugary drinks (β 7; 95% CI -7, 20 ml/day; p-trend<0.05 and of alcoholic beverages (β 24; 95% CI 10, 38 ml/day; p-trend<0.001. Specifically, a higher number of OREB was associated with higher intake of dairy products and red meat, and with lower consumption of fresh fruit, oily fish and white meat. No association was found between the number of OREB and food portion size or the number of eating occasions.OREB were associated with higher food energy density and higher consumption of sugary and alcoholic beverages. Avoiding OREB may prove difficult because they are firmly socially rooted, but these results may nevertheless serve to palliate the undesirable effects of OREB by reducing the associated energy intake.

The Interplay between Reflective Thinking, Critical Thinking, Self-Monitoring, and Academic Achievement in Higher Education

Science.gov (United States)

Ghanizadeh, Afsaneh

2017-01-01

The present study assessed the associations among higher-order thinking skills (reflective thinking, critical thinking) and self-monitoring that contribute to academic achievement among university students. The sample consisted of 196 Iranian university students (mean age = 22.05, SD = 3.06; 112 females; 75 males) who were administered three…

Intellectual ability, learning style, personality, achievement motivation and academic success of psychology students in higher education.

NARCIS (Netherlands)

Busato, V.V.; Prins, F.J.; Elshout, J.J.; Hamaker, C.

2000-01-01

This study is directed towards an integration of intellectual ability, learning style, personality and achievement motivation as predictors of academic success in higher education. Correlational analyses partly confirmed and partly disconfirmed our expectations in a sample of 409 first-year

Evaluation of Roadmap to Achieve Energy Delivery Systems Cybersecurity

Energy Technology Data Exchange (ETDEWEB)

Chavez, Adrian R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-10-01

The Department of Energy/Office of Electricity Delivery and Energy Reliability (DOE/OE) Cybersecurity for Energy Delivery Systems (CEDS) program is currently evaluating the Roadmap to Achieve Energy Delivery Systems Cybersecurity document that sets a vision and outlines a set of milestones. The milestones are divided into five strategic focus areas that include: 1. Build a Culture of Security; 2. Assess and Monitor Risk; 3. Develop and Implement New Protective Measures to Reduce Risk; 4. Manage Incidents; and 5. Sustain Security Improvements. The most current version of the roadmap was last updated in September of 2016. Sandia National Laboratories (SNL) has been tasked with revisiting the roadmap to update the current state of energy delivery systems cybersecurity protections. SNL is currently working with previous and current partners to provide feedback on which of the roadmap milestones have been met and to identify any preexisting or new gaps that are not addressed by the roadmap. The specific focus areas SNL was asked to evaluate are: 1. Develop and Implement New Protective Measures to Reduce Risk and 2. Sustain Security Improvements. SNL has formed an Industry Advisory Board (IAB) to assist in answering these questions. The IAB consists of previous partners on past CEDS funded efforts as well as new collaborators that have unique insights into the current state of cybersecurity within energy delivery systems. The IAB includes asset owners, utilities and vendors of control systems. SNL will continue to maintain regular communications with the IAB to provide various perspectives on potential future updates to further improve the breadth of cybersecurity coverage of the roadmap.

Engineering the Pores of Biomass-Derived Carbon: Insights for Achieving Ultrahigh Stability at High Power in High-Energy Supercapacitors.

Science.gov (United States)

Thangavel, Ranjith; Kaliyappan, Karthikeyan; Ramasamy, Hari Vignesh; Sun, Xueliang; Lee, Yun-Sung

2017-07-10

Electrochemical supercapacitors with high energy density are promising devices due to their simple construction and long-term cycling performance. The development of a supercapacitor based on electrical double-layer charge storage with high energy density that can preserve its cyclability at higher power presents an ongoing challenge. Herein, we provide insights to achieve a high energy density at high power with an ultrahigh stability in an electrical double-layer capacitor (EDLC) system by using carbon from a biomass precursor (cinnamon sticks) in a sodium ion-based organic electrolyte. Herein, we investigated the dependence of EDLC performance on structural, textural, and functional properties of porous carbon engineered by using various activation agents. The results demonstrate that the performance of EDLCs is not only dependent on their textural properties but also on their structural features and surface functionalities, as is evident from the electrochemical studies. The electrochemical results are highly promising and revealed that the porous carbon with poor textural properties has great potential to deliver high capacitance and outstanding stability over 300 000 cycles compared with porous carbon with good textural properties. A very low capacitance degradation of around 0.066 % per 1000 cycles, along with high energy density (≈71 Wh kg -1 ) and high power density, have been achieved. These results offer a new platform for the application of low-surface-area biomass-derived carbons in the design of highly stable high-energy supercapacitors. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

CERN: LEP to higher energy/LHC magnet string test

International Nuclear Information System (INIS)

Anon.

1995-01-01

At 19.45 on 31 October, CERN's LEP electron-positron collider, equipped with superconducting radiofrequency accelerating cavities, registered its first events at a record collision energy of 130 GeV. During November, LEP went on to operate in the 130-140 GeV collision energy range. Fabrication and installation of the superconducting radiofrequency accelerating cavities needed to boost the energy of LEP's electron and positron beams have speeded up as confidence and expertise have increased. 16 additional cavities were installed in a brief technical stop during October. For the substantially upgraded machine to supply 65 GeV beams immediately and at luminosities comparable to those routinely attained before shows that the complicated technology needed for the superconducting cavities and mastering the machine itself are well under control - yet another remarkable achievement in CERN's tradition of remarkable achievements. Before the end-1995 run, LEP had been operating around the Z resonance at 91 GeV ever since its commissioning in 1989. LEP precision data on the Z, the electrically neutral carrier of the weak nuclear force, is now complete, and attention shifts toward the next major objective, accumulating data on the W, the Z's electrically charged counterpart. Unlike the Z, produced singly in electron-positron annihilations, the electrically charged Ws have to be produced in pairs. During the coming long shutdown, more superconducting modules will be installed to prepare for recommencement of operations in June, this time at collision energies of 161 GeV, allowing a first step across a longawaited 2W threshold. Later in the year more cavities will be ready to boost collision energies to 176 GeV. However in the meantime the LEP experiments, no longer blinded by the Z resonance, will be keeping a sharp eye open for new physics, and in particular for signs of as yet unseen supersymmetric particles. Theorists have long been convinced that our

Double-layer capacitors with a higher energy density; Doppelschichtkondensatoren mit hoeherem Energieinhalt

Energy Technology Data Exchange (ETDEWEB)

Presser, Volker [Leibniz-Institut fuer Neue Materialien (INM) gGmbH, Saarbruecken (Germany). Juniorforschungs-Gruppe Energie-Materialien; Universitaet des Saarlandes, Saarbruecken (Germany)

2013-05-15

Electrical double-layer capacitors, also known as supercapacitors (SC) are devices for electrical energy storage used for fast acceleration of hybrid cars or for the energy recovery during breaking operations. In contrast, lithium-ion batteries (LIB) are used as energy storage devices to provide an extended travel distance for plug-in hybrid cars and electric vehicles. Current research aims to overcome the major limitations of both technologies (SC: low energy density/LIB: slow recharge and limited service life) and hybrid cells are considered a promising solution. The goal is to improve the performance and energy density of storage devices which can be achieved, as shown by the Leibniz-Institute for New Materials (INM), with the use of nanotechnology. (orig.)

Commercial Buildings Partnerships - Overview of Higher education projects

Energy Technology Data Exchange (ETDEWEB)

Parrish, Kristen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Robinson, Alastair [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Regnier, Cindy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2013-02-01

The Commercial Building Partnership (CBP), a public/private, cost-shared program sponsored by the U.S. Department of Energy (DOE), paired selected commercial building owners and operators with representatives of DOE, its national laboratories, and private-sector technical experts. These teams explored energy-saving measures across building systems – including some considered too costly or technologically challenging – and used advanced energy modeling to achieve peak whole-building performance. Modeling results were then included in new construction or retrofit designs to achieve significant energy reductions. CBP design goals aimed to achieve 50 percent energy savings compared to ANSI/ASHRAE/IES Standard 90.1-2004 for new construction, while retrofits are designed to consume at least 30 percent less energy than either Standard 90.1-2004 or current consumption. After construction and commissioning of the project, laboratory staff continued to work with partners to collect and analyze data for verification of the actual energy reduction. CBP projects represent diverse building types in commercial real estate, including lodging, grocery, retail, higher education, office, and warehouse/storage facilities. Partners also commit to replicating low-energy technologies and strategies from their CBP projects throughout their building portfolios. As a result of CBP projects, five sector overviews (Lodging, Food Sales, General Merchandise, Higher Education, Offices) were created to capture successful strategies and recommended energy efficiency measures that could broadly be applied across these sectors. These overviews are supplemented with individual case studies providing specific details on the decision criteria, modeling results, and lessons learned on specific projects. Sector overviews and CBP case studies will also be updated to reflect verified data and replication strategies as they become available.

Obesity-related eating behaviors are associated with higher food energy density and higher consumption of sugary and alcoholic beverages: a cross-sectional study.

Science.gov (United States)

Muñoz-Pareja, Maritza; Guallar-Castillón, Pilar; Mesas, Arthur E; López-García, Esther; Rodríguez-Artalejo, Fernando

2013-01-01

Obesity-related eating behaviors (OREB) are associated with higher energy intake. Total energy intake can be decomposed into the following constituents: food portion size, food energy density, the number of eating occasions, and the energy intake from energy-rich beverages. To our knowledge this is the first study to examine the association between the OREB and these energy components. Data were taken from a cross-sectional study conducted in 2008-2010 among 11,546 individuals representative of the Spanish population aged ≥ 18 years. Information was obtained on the following 8 self-reported OREB: not planning how much to eat before sitting down, eating precooked/canned food or snacks bought at vending machines or at fast-food restaurants, not choosing low-energy foods, not removing visible fat from meat or skin from chicken, and eating while watching TV. Usual diet was assessed with a validated diet history. Analyses were performed with linear regression with adjustment for main confounders. Compared to individuals with ≤ 1 OREB, those with ≥ 5 OREB had a higher food energy density (β 0.10; 95% CI 0.08, 0.12 kcal/g/day; p-trendassociated with higher intake of dairy products and red meat, and with lower consumption of fresh fruit, oily fish and white meat. No association was found between the number of OREB and food portion size or the number of eating occasions. OREB were associated with higher food energy density and higher consumption of sugary and alcoholic beverages. Avoiding OREB may prove difficult because they are firmly socially rooted, but these results may nevertheless serve to palliate the undesirable effects of OREB by reducing the associated energy intake.

Cutting costs by achieving energy efficiency using monitoring, targeting and teamwork

Energy Technology Data Exchange (ETDEWEB)

Dittburner, D. [Unilever Canada, Toronto, ON (Canada)

2004-07-01

Unilever is a world leader of consumer goods with annual sales of $70 billion. This paper focuses on energy management projects developed at Unilever's Rexdale Plant, where 180 million pounds of edible oils and margarine are produced annually. The project is a response to corporate and market pressures to reduce costs. An overview of Unilever's relationship with Natural Resources Canada was provided. Results of the overall project were highlighted and included: $3 million in annual savings from increased efficiency in operations and equipment retrofits. An outline of the energy team at Unilever was presented, with their mission statement, rules and achievements, as well the company's overall goal of total productive manufacturing. A list of awards and financial incentives was presented, as well as details of financial savings incurred at the Rexdale Plant. Total energy reductions were presented, with a natural gas year to year comparison and utility to production ratios from 1999 to the present. A statement concerning the issue of corporate support by the vice president was provided. Seven steps to savings were presented, as well as details of the company's implementation of the steps. Details of the extended team involved in the project were provided, as well as extensive details about the employee awareness program instigated by the company, including a database of ideas achieved since 2001, as well as details of specific projects accomplished, with estimated savings for each project. An outline of the company's business model and methodology was presented, along with details of reduced costs, risk and improved management and communications. An outline of scoping studies was presented as well as a flow chart of projects and target-setting goals. Success factors were reviewed. Montage applications included energy management; performance contracting; energy forecasting; emissions and waste minimization; and cost allocation. tabs., figs.

Achieving stringent climate targets. An analysis of the role of transport and variable renewable energies using energy-economy-climate models

Energy Technology Data Exchange (ETDEWEB)

Pietzcker, Robert Carl

2014-07-01

Anthropogenic climate change is threatening the welfare of mankind. Accordingly, policy makers have repeatedly stated the goal of slowing climate change and limiting the increase of global mean temperature to less than 2 C above pre-industrial times (the so-called ''two degree target''). Stabilizing the temperature requires drastic reductions of greenhouse gas (GHG) emissions to nearly zero. As the global system of energy supply currently relies on fossil fuels, reducing GHG emissions can only be achieved through a full-scale transformation of the energy system. This thesis investigates the economic requirements and implications of different scenarios that achieve stringent climate mitigation targets. It starts with the analysis of characteristic decarbonization patterns and identifies two particularly relevant aspects of mitigation scenarios: deployment of variable renewable energies (VRE) and decarbonization of the transport sector. After investigating these fields in detail, we turned towards one of the most relevant questions for policy makers and analyzed the trade-off between the stringency of a climate target and its economic requirements and implications. All analyses are based on the improvement, application, comparison, and discussion of large-scale IAMs. The novel ''mitigation share'' metric allowed us to identify the relevance of specific technology groups for mitigation and to improve our understanding of the decarbonization patterns of different energy subsectors. It turned out that the power sector is decarbonized first and reaches lowest emissions, while the transport sector is slowest to decarbonize. For the power sector, non-biomass renewable energies contribute most to emission reductions, while the transport sector strongly relies on liquid fuels and therefore requires biomass in combination with carbon capture and sequestration (CCS) to reduce emissions. An in-depth investigation of the solar power

Students' Commitment, Engagement and Locus of Control as Predictor of Academic Achievement at Higher Education Level

Science.gov (United States)

Sarwar, Muhammad; Ashrafi, Ghulam Muhammad

2014-01-01

The purpose of this study was to analyze Students' Commitment, Engagement and Locus of Control as predictors of Academic Achievement at Higher Education Level. We used analytical model and conclusive research approach to conduct study and survey method for data collection. We selected 369 students using multistage sampling technique from three…

Energy Efficiency of Higher Education Buildings: A Case Study

Science.gov (United States)

Soares, Nelson; Pereira, Luísa Dias; Ferreira, João; Conceição, Pedro; da Silva, Patrícia Pereira

2015-01-01

Purpose: This paper aims to propose an energy efficiency plan (with technical and behavioural improvement measures) for a Portuguese higher education building--the Teaching Building of the Faculty of Economics of the University of Coimbra (FEUC). Design/methodology/approach: The study was developed in the context of both the "Green…

Carrboro, North Carolina: Achieving Building Efficiencies for Low-Income Households (City Energy: From Data to Decisions)

Energy Technology Data Exchange (ETDEWEB)

Office of Strategic Programs, Strategic Priorities and Impact Analysis Team

2017-09-29

This fact sheet "Carrboro, North Carolina: Achieving Building Efficiencies for Low-Income Households" explains how the Town of Carrboro used data from the U.S. Department of Energy's Cities Leading through Energy Analysis and Planning (Cities-LEAP) and the State and Local Energy Data (SLED) programs to inform its city energy planning. It is one of ten fact sheets in the "City Energy: From Data to Decisions" series.

Challenges and Opportunities To Achieve 50% Energy Savings in Homes: National Laboratory White Papers

Energy Technology Data Exchange (ETDEWEB)

Bianchi, M. V. A.

2011-07-01

In 2010, researchers from four of the national laboratories involved in residential research (Lawrence Berkeley National Laboratory, National Renewable Energy Laboratory, Oak Ridge National Laboratory, and Pacific Northwest National Laboratory) were asked to prepare papers focusing on the key longer term research challenges, market barriers, and technology gaps that must be addressed to achieve the longer term 50% saving goal for Building America to ensure coordination with the Building America industry teams who are focusing their research on systems to achieve the near-term 30% savings goal. Although new construction was included, the focus of the effort was on deep energy retrofits of existing homes. This report summarizes the key opportunities, gaps, and barriers identified in the national laboratory white papers.

Development of Pathways to Achieve the SE4ALL Energy Efficiency Objective: Global and Regional Potential for Energy Efficiency Improvements

DEFF Research Database (Denmark)

Gregg, Jay Sterling; Balyk, Olexandr; Pérez, Cristian Hernán Cabrera

This study examines the three objectives of the UN Sustainable Energy for All (SE4ALL) initiative: 1. Ensure universal access to modern energy services by 2030. 2. Double the global rate of improvement in energy efficiency (from 1.3% to 2.6% annual reduction in energy intensity of GDP) by 2030. 3....... Double the share of renewable energy in global final energy from 18% to 36% by 2030. The integrated assessment model, ETSAP-TIAM, was used in this study to compare, from an economic optimization point of view, different scenarios for the development of the energy system between 2010 and 2030....... This analysis is conducted on a global and regional scale. The scenarios were constructed to analyze the effect of achieving the SE4ALL energy efficiency objective, the SE4ALL renewable energy objective, both together, and all three SE4ALL objectives. Synergies exist between renewable energy and energy...

Motivation, cognitive processing and achievement in higher education

NARCIS (Netherlands)

Bruinsma, M.

2004-01-01

This study investigated the question of whether a student's expectancy, values and negative affect influenced their deep information processing approach and achievement at the end of the first and second academic year. Five hundred and sixty-five first-year students completed a self-report

Energy balance of algal biomass production in a 1-ha “Green Wall Panel” plant: How to produce algal biomass in a closed reactor achieving a high Net Energy Ratio

International Nuclear Information System (INIS)

Tredici, M.R.; Bassi, N.; Prussi, M.; Biondi, N.; Rodolfi, L.; Chini Zittelli, G.; Sampietro, G.

2015-01-01

Highlights: • Tetraselmis suecica production in a 1-ha GWP plant in Tuscany (Italy) has a NER < 1. • Major energy costs are embodied energy of GWP and mixing. • In a suitable location (North Africa) the NER increases by 40%. • Integration of photovoltaic in the GWP allows to achieve a NER of 1.7. • T. suecica cultivated in a GWP plant can yield up to 30 t of protein ha −1 year −1 . - Abstract: The annual productivity of Tetraselmis suecica in a 1-ha Green Wall Panel-II (GWP-II) plant in Tuscany (Italy) is 36 t (dry weight) ha −1 year −1 , which corresponds to an energy output of 799 GJ ha −1 year −1 . The energy inputs necessary to attain that productivity amount to 1362 GJ ha −1 year −1 , mainly given by the embodied energy of the reactor (about 30%), mixing (about 40%), fertilizers (11%) and harvesting (10%). The Net Energy Ratio (NER) of T. suecica production is thus 0.6. In a more suitable location (North Africa) productivity nearly doubles, reaching 66 t ha −1 year −1 , but the NER increases only by 40% and the gain (difference between output and inputs) remains negative. In a GWP-II integrated with photovoltaics (PV), the NER becomes 1.7 and the gain surpasses 600 GJ ha −1 year −1 . Marine microalgae cultivation in a GWP plant, in a suitable location, can attain high biomass productivities and protein yields 30 times higher than those achievable with traditional crops (soya). When the GWP reactor is integrated with PV, the process attains a positive energy balance, which substantially enhances its sustainability

The Effects of Social Identification and Organizational Identification on Student Commitment, Achievement and Satisfaction in Higher Education

Science.gov (United States)

Wilkins, Stephen; Butt, Muhammad Mohsin; Kratochvil, Daniel; Balakrishnan, Melodena Stephens

2016-01-01

The purpose of this research is to investigate the effects of social and organizational identifications on student commitment, achievement and satisfaction in higher education. The sample comprised 437 students enrolled in an undergraduate or postgraduate programme in business or management. A model was developed and tested using structural…

Distributional implications of higher energy prices in the UK

Energy Technology Data Exchange (ETDEWEB)

Common, M

1985-06-01

Results presented are consistent with the claim that higher energy prices are regressive in impact in the UK. However, the size of the impact on the worst affected is not found to be as great as might be expected. It is not at all obvious that the size of impact established is such as to justify the use of terms such as fuel poverty or arguments for the subsidization of fuels purchased by those on low incomes. This is not to say that low income households in the UK have not in the last decade had serious problems with fuel bills. The evidence of, for example, the Supplementary Benefits Commission (1979) makes it obvious that large numbers of households have experienced real problems. However, from the evidence considered here, it is reasonable to suggest that the origin of such problems lies more with the technical characteristics of the consumption act, and with institutional arrangements for payment, in respect of heating and lighting, than with impact of higher fuel prices as such. Gas and electricity consumption is not readily monitored as use occurs, and payment is often by billing well after consumption. Casual observation suggests that the difficulties with fuel bills as reported to welfare agencies are predominantly difficulties with gas and electricity bills. The results also show that of the total impact of higher energy prices on cost of living indices, only 50% arises via the consumption of fuels in the home.

Energy politics: Can we achieve a sustainable energy path?

International Nuclear Information System (INIS)

Nicklas, M.

1993-01-01

The political pressures affecting global energy choices are numerous, vary by country, and are significantly changing. In evaluating our energy future, one cannot escape recognition of three dominant areas where reality more than politics will dictate needs and directions. Within the next decade the magnitude and importance of population growth, energy resource availability, and the environmental and societal costs of energy will gradually increase and dominate global energy decisionmaking. This paper will discuss these major forces, how they have influenced past actions, and how they will shape our energy future

A higher-complex carbohydrate diet in gestational diabetes mellitus achieves glucose targets and lowers postprandial lipids: a randomized crossover study.

Science.gov (United States)

Hernandez, Teri L; Van Pelt, Rachael E; Anderson, Molly A; Daniels, Linda J; West, Nancy A; Donahoo, William T; Friedman, Jacob E; Barbour, Linda A

2014-01-01

The conventional diet approach to gestational diabetes mellitus (GDM) advocates carbohydrate restriction, resulting in higher fat (HF), also a substrate for fetal fat accretion and associated with maternal insulin resistance. Consequently, there is no consensus about the ideal GDM diet. We hypothesized that, compared with a conventional, lower-carbohydrate/HF diet (40% carbohydrate/45% fat/15% protein), consumption of a higher-complex carbohydrate (HCC)/lower-fat (LF) Choosing Healthy Options in Carbohydrate Energy (CHOICE) diet (60/25/15%) would result in 24-h glucose area under the curve (AUC) profiles within therapeutic targets and lower postprandial lipids. Using a randomized, crossover design, we provided 16 GDM women (BMI 34 ± 1 kg/m2) with two 3-day isocaloric diets at 31 ± 0.5 weeks (washout between diets) and performed continuous glucose monitoring. On day 4 of each diet, we determined postprandial (5 h) glucose, insulin, triglycerides (TGs), and free fatty acids (FFAs) following a controlled breakfast meal. There were no between-diet differences for fasting or mean nocturnal glucose, but 24-h AUC was slightly higher (∼6%) on the HCC/LF CHOICE diet (P = 0.02). The continuous glucose monitoring system (CGMS) revealed modestly higher 1- and 2-h postprandial glucose on CHOICE (1 h, 115 ± 2 vs. 107 ± 3 mg/dL, P ≤ 0.01; 2 h, 106 ± 3 vs. 97 ± 3 mg/dL, P = 0.001) but well below current targets. After breakfast, 5-h glucose and insulin AUCs were slightly higher (P diet. This highly controlled study randomizing isocaloric diets and using a CGMS is the first to show that liberalizing complex carbohydrates and reducing fat still achieved glycemia below current treatment targets and lower postprandial FFAs. This diet strategy may have important implications for preventing macrosomia.

Motivation, Cognitive Processing and Achievement in Higher Education

Science.gov (United States)

Bruinsma, Marjon

2004-01-01

This study investigated the question of whether a student's expectancy, values and negative affect influenced their deep information processing approach and achievement at the end of the first and second academic year. Five hundred and sixty-five first-year students completed a self-report questionnaire on three different occasions. The…

Management Strategies for Sustainability Education, Planning, Design, Energy Conservation in California Higher Education

Science.gov (United States)

Petratos, Panagiotis; Damaskou, Evangelia

2015-01-01

Purpose: The purpose of this paper is to describe and analyze the effects of campus sustainability planning to annual campus energy inflows and outflows in California higher education. The paper also offers a preliminary statistical analysis for the evaluation of impact factors on energy outflows and a link between energy outflows and building…

Leveraging People-Related Maturity Issues for Achieving Higher Maturity and Capability Levels

Science.gov (United States)

Buglione, Luigi

During the past 20 years Maturity Models (MM) become a buzzword in the ICT world. Since the initial Crosby's idea in 1979, plenty of models have been created in the Software & Systems Engineering domains, addressing various perspectives. By analyzing the content of the Process Reference Models (PRM) in many of them, it can be noticed that people-related issues have little weight in the appraisals of the capabilities of organizations while in practice they are considered as significant contributors in traditional process and organizational performance appraisals, as stressed instead in well-known Performance Management models such as MBQA, EFQM and BSC. This paper proposes some ways for leveraging people-related maturity issues merging HR practices from several types of maturity models into the organizational Business Process Model (BPM) in order to achieve higher organizational maturity and capability levels.

Accreditation of Viet Nam's Higher Education: Achievements and Challenges after a Dozen Years of Development

Science.gov (United States)

Nguyen, Huu Cuong; Evers, Colin; Marshall, Stephen

2017-01-01

Purpose: The purpose of this paper is to investigate the development of Viet Nam's approach to higher education quality assurance during the past dozen years since its establishment, focusing on the achievements and challenges. Design/methodology/approach: This is a desktop analysis study. The paper analyses the policies and practices related to…

Water and energy link in the cities of the future - achieving net zero carbon and pollution emissions footprint.

Science.gov (United States)

Novotny, V

2011-01-01

This article discusses the link between water conservation, reclamation, reuse and energy use as related to the goal of achieving the net zero carbon emission footprint in future sustainable cities. It defines sustainable ecocities and outlines quantitatively steps towards the reduction of energy use due to water and used water flows, management and limits in linear and closed loop water/stormwater/wastewater management systems. The three phase water energy nexus diagram may have a minimum inflection point beyond which reduction of water demand may not result in a reduction of energy and carbon emissions. Hence, water conservation is the best alternative solution to water shortages and minimizing the carbon footprint. A marginal water/energy chart is developed and proposed to assist planners in developing future ecocities and retrofitting older communities to achieve sustainability.

Higher dimensional time-energy entanglement

International Nuclear Information System (INIS)

Richart, Daniel Lampert

2014-01-01

freedom improves its applicability to long distance quantum communication schemes. By doing that, the intrinsic limitations of other schemes based on the encoding into the momentum and polarization degree of freedom are overcome. This work presents results on a scalable experimental implementation of time-energy encoded higher dimensional states, demonstrating the feasibility of the scheme. Further tools are defined and used to characterize the properties of the prepared quantum states, such as their entanglement, their dimension and their preparation fidelity. Finally, the method of quantum state tomography is used to fully determine the underlying quantum states at the cost of an increased measurement effort and thus operation time. It is at this point that results obtained from the research field of compressed sensing help to decrease the necessary number of measurements. This scheme is compared with an adaptive tomography scheme designed to offer an additional reconstruction speedup. These results display the scalability of the scheme to bipartite dimensions higher than 2 x 8, equivalent to the encoding of quantum information into more than 6 qubits.

Higher dimensional time-energy entanglement

Energy Technology Data Exchange (ETDEWEB)

Richart, Daniel Lampert

2014-07-08

freedom improves its applicability to long distance quantum communication schemes. By doing that, the intrinsic limitations of other schemes based on the encoding into the momentum and polarization degree of freedom are overcome. This work presents results on a scalable experimental implementation of time-energy encoded higher dimensional states, demonstrating the feasibility of the scheme. Further tools are defined and used to characterize the properties of the prepared quantum states, such as their entanglement, their dimension and their preparation fidelity. Finally, the method of quantum state tomography is used to fully determine the underlying quantum states at the cost of an increased measurement effort and thus operation time. It is at this point that results obtained from the research field of compressed sensing help to decrease the necessary number of measurements. This scheme is compared with an adaptive tomography scheme designed to offer an additional reconstruction speedup. These results display the scalability of the scheme to bipartite dimensions higher than 2 x 8, equivalent to the encoding of quantum information into more than 6 qubits.

Development of a low-cost biogas filtration system to achieve higher-power efficient AC generator

Science.gov (United States)

Mojica, Edison E.; Ardaniel, Ar-Ar S.; Leguid, Jeanlou G.; Loyola, Andrea T.

2018-02-01

The paper focuses on the development of a low-cost biogas filtration system for alternating current generator to achieve higher efficiency in terms of power production. A raw biogas energy comprises of 57% combustible element and 43% non-combustible elements containing carbon dioxide (36%), water vapor (5%), hydrogen sulfide (0.5%), nitrogen (1%), oxygen (0 - 2%), and ammonia (0 - 1%). The filtration system composes of six stages: stage 1 is the water scrubber filter intended to remove the carbon dioxide and traces of hydrogen sulfide; stage 2 is the silica gel filter intended to reduce the water vapor; stage 3 is the iron sponge filter intended to remove the remaining hydrogen sulfide; stage 4 is the sodium hydroxide solution filter intended to remove the elemental sulfur formed during the interaction of the hydrogen sulfide and the iron sponge and for further removal of carbon dioxide; stage 5 is the silica gel filter intended to further eliminate the water vapor gained in stage 4; and, stage 6 is the activated carbon filter intended to remove the carbon dioxide. The filtration system was able to lower the non-combustible elements by 72% and thus, increasing the combustible element by 54.38%. The unfiltered biogas is capable of generating 16.3 kW while the filtered biogas is capable of generating 18.6 kW. The increased in methane concentration resulted to 14.11% increase in the power output. The outcome resulted to better engine performance in the generation of electricity.

Achieving 99.9% proton spin-flip efficiency at higher energy with a small rf dipole

CERN Document Server

Leonova, M A; Gebel, R; Hinterberger, F; Krisch, A D; Lehrach, A; Lorentz, B; Maier, R; Morozov, V S; Prasuhn, D; Raymond, R S; Schnase, A; Stockhorst, H; Ulbrich, K; Wong, V K; 10.1103/PhysRevLett.93.224801

2004-01-01

We recently used a new ferrite rf dipole to study spin flipping of a 2.1 GeV/c vertically polarized proton beam stored in the COSY Cooler Synchrotron in Julich, Germany. We swept the rf dipole's frequency through an rf-induced spin resonance to flip the beam's polarization direction. After determining the resonance's frequency, we varied the frequency range, frequency ramp time, and number of flips. At the rf dipole's maximum strength and optimum frequency range and ramp time, we measured a spin-flip efficiency of 99.92+or-0.04%. This result, along with a similar 0.49 GeV/c IUCF result, indicates that, due to the Lorentz invariance of an rf dipole's transverse integral Bdl and the weak energy dependence of its spin-resonance strength, an only 35% stronger rf dipole should allow efficient spin flipping in the 100 GeV BNL RHIC Collider or even the 7 TeV CERN Large Hadron Collider.

Achieving increased bandwidth for 4 degree of freedom self-tuning energy harvester

Science.gov (United States)

Staaf, L. G. H.; Smith, A. D.; Köhler, E.; Lundgren, P.; Folkow, P. D.; Enoksson, P.

2018-04-01

The frequency response of a self-tuning energy harvester composed of two piezoelectric cantilevers connected by a middle beam with a sliding mass is investigated. Measurements show that incorporation of a free-sliding mass increases the bandwidth. Using an analytical model, the system is explained through close investigation of the resonance modes. Resonance mode behavior further suggests that, by breaking the symmetry of the system, even broader bandwidths are achievable.

Estimating potential saving with energy consumption behaviour model in higher education institutions

Directory of Open Access Journals (Sweden)

Mohd Hafizal Ishak

2016-11-01

Full Text Available Towards sustainable Higher Education Institutions (HEIs, energy consumption behaviour is one of several issues that require an attention by facilities manager. Information from the behavioural aspect would be useful for facilities manager on managing the energy and determining potential energy saving. A lack of information negatively affects this aim. Hence, this paper proposes a methodology for assessing the energy consumption behaviour with the objective determining potential energy saving. The method used energy culture framework as basis and joined with centrographic approach and multiple-regression analysis. A self-administrated survey carried out involving 1400 respondents in selected HEIs. There are four types of energy use among students in HEIs namely, 'high', 'low', ‘medium’ and 'conserve' determined from the centrographic analysis. The energy consumption behaviour model was developed and tested against the holdout sample. Through the model's application, there is a vast potential for energy savings with over 55 kWh daily among the students.

Rooftop photovoltaic (PV) systems for industrial halls: Achieving economic benefit via lowering energy demand

NARCIS (Netherlands)

Lee, B.; Trcka, M.; Hensen, J.L.M.

2012-01-01

Industrial halls are characterized with their relatively high roof-to-floor ratio, which facilitates ready deployment of renewable energy generation, such as photovoltaic (PV) systems, on the rooftop. To promote deployment of renewable energy generation, feed-in tariff (FIT) higher than the

POLICIES AND MEASURES FOR RENEWABLE ENERGY SOURCES AND ACHIEVEMENT OF TARGETS BY 2020 IN CROATIA

Directory of Open Access Journals (Sweden)

Igor Raguzin

2010-01-01

Full Text Available This paper is considering set up a longer-term perspective and plan of actions for the development of renewable energy infrastructure in Croatia in accordance with the new Croatian Energy Sector Development Strategy. Overall target till the year 2020 has been calculated in accordance with effort sharing methodology used for Directive 2009/28/EC. The paper presents some main existing policies and measures for achieving this ambitious target, including feed-in tariffs, guarantees of origin, and greenhouse gas emissions taxation. It is addressed the necessity for creating enabling environment for promotion of renewable energy sources and gradually remove barriers for its stronger penetration on the energy market.

Fast-Rate Capable Electrode Material with Higher Energy Density than LiFePO4: 4.2V LiVPO4F Synthesized by Scalable Single-Step Solid-State Reaction.

Science.gov (United States)

Kim, Minkyung; Lee, Seongsu; Kang, Byoungwoo

2016-03-01

Use of compounds that contain fluorine (F) as electrode materials in lithium ion batteries has been considered, but synthesizing single-phase samples of these compounds is a difficult task. Here, it is demonstrated that a simple scalable single-step solid-state process with additional fluorine source can obtain highly pure LiVPO 4 F. The resulting material with submicron particles achieves very high rate capability ≈100 mAh g -1 at 60 C-rate (1-min discharge) and even at 200 C-rate (18 s discharge). It retains superior capacity, ≈120 mAh g -1 at 10 C charge/10 C discharge rate (6-min) for 500 cycles with >95% retention efficiency. Furthermore, LiVPO 4 F shows low polarization even at high rates leading to higher operating potential >3.45 V (≈3.6 V at 60 C-rate), so it achieves high energy density. It is demonstrated for the first time that highly pure LiVPO 4 F can achieve high power capability comparable to LiFePO 4 and much higher energy density (≈521 Wh g -1 at 20 C-rate) than LiFePO 4 even without nanostructured particles. LiVPO 4 F can be a real substitute of LiFePO 4.

The energy intensity target in China's 11th Five-Year Plan period-Local implementation and achievements in Shanxi Province

International Nuclear Information System (INIS)

Zhang Daisheng; Aunan, Kristin; Martin Seip, Hans; Vennemo, Haakon

2011-01-01

Facing the mounting pressure on energy security and increasing environmental concerns about air pollution and climate change, the Chinese government set a mandatory goal of 20% reduction of energy intensity in its 11th Five-Year Plan period (FYP, 2006-2010). In this paper we use Shanxi province to illustrate how policies and measures are implemented in practice at a provincial level as a response to the National FYP issued by the central government. Local policies are described and their effects are analyzed. We compare reported energy saving achievements with our own estimates and conclude that the achievements in Shanxi probably have been substantial since the start of the 11th FYP period. The most important measures taken by provincial and local governments seem to be in the secondary sector, such as Top-200/Top-1000 program and phasing out outdated technologies. However, Shanxi has still a long way to go to achieve satisfactory energy use. Further improvement of energy intensity will require continuing efforts. Although many measures are necessary, improving the energy efficiency in heavy industries and reducing the dependence on these industries should be particularly effective. - Highlights: → We use Shanxi province to illustrate how local policies respond to the National FYP. → Energy saving in Shanxi has been substantial since the start of the 11th FYP. → Assumptions about baseline energy use strongly affects energy saving estimates. → The most important measures taken by local governments are in the secondary sector. → Further improvement of energy intensity will require efforts especially in heavy industries.

Energy Costs and Energy Conservation Programs in Colleges and Universities: 1972-73, 1974-75. Higher Education Panel Reports, Number 31.

Science.gov (United States)

Atelsek, Frank J.; Gomberg, Irene L.

A survey was initiated at the request of the U.S. Office of Education and the Energy Task Force to: (1) measure the increase in energy expenditures since the OPEC oil embargo of 1973-74; (2) assess changes in energy consumption over a two-year period; and (3) examine some of the specific conservation practices of higher education institutions.…

Casimir energy and the possibility of higher dimensional manipulation

OpenAIRE

Obousy, R. K.; Saharian, A. A.

2009-01-01

It is well known that the Casimir effect is an excellent candidate for the stabilization of the extra dimensions. It has also been suggested that the Casimir effect in higher dimensions may be the underlying phenomenon that is responsible for the dark energy which is currently driving the accelerated expansion of the universe. In this paper we suggest that, in principle, it may be possible to directly manipulate the size of an extra dimension locally using Standard Model fields in the next ge...

Energy for tomorrow's world: the realities, the real options and the agenda for achievement

International Nuclear Information System (INIS)

Lindsay, Ian

1994-01-01

The key energy issues to 2020 have been identified and partial solutions have been offered for them. Like many projects it may have its weak points - it may possibly have underestimated developing countries requirements: the assumption that oil and gas reserves will come under pressure early next century inducing price rises, may or may not materialize; and the lack of more specific messages as an agenda achievement may be seen by some as deficiencies. The main priorities have been identified and required action for global energy development is given. (author)

The role of communications in achieving sound energy policy and excellence in nuclear power

International Nuclear Information System (INIS)

Harris, B.

1988-01-01

This paper highlights the renewed emphasis on excellence throughout the U.S. nuclear power industry. The author discusses the role of the industry's national communications programs in helping achieve excellence, and in helping maintain the viability of nuclear power as a major source of energy in America. The author discusses an industry report which emphasized that quality operational performance of all U.S. nuclear utilities is absolutely essential for public and regulatory trust. To achieve that trust, the public must know about operational excellence. According to the author, delivering that message is one of the industry's major assignments

Improvements to the nuclear model code GNASH for cross section calculations at higher energies

International Nuclear Information System (INIS)

Young, P.G.; Chadwick, M.B.

1994-01-01

The nuclear model code GNASH, which in the past has been used predominantly for incident particle energies below 20 MeV, has been modified extensively for calculations at higher energies. The model extensions and improvements are described in this paper, and their significance is illustrated by comparing calculations with experimental data for incident energies up to 160 MeV

Croatian Energy Sector Reform - Results Achieved

International Nuclear Information System (INIS)

Nota, R.

2001-01-01

During the past ten years, the energy sector has passed through significant changes including fundamental market, economic, legislative and institutional aspects of sector operation. As the main goal of the Republic of Croatia is the integration into the European Union, the energy sector reform ought to be conducted in keeping with the present market development processes of the EU in such a way as to fulfil all safety criteria. In view of the above mentioned, the Croatian Parliament brought a number of laws during its session in July 2001 (''Official Gazette'' 68/01): 1. Energy Law 2. Energy Activities Regulation Law 3. Electricity Market Law 4. Gas Market Law 5. Oil and Oil Derivatives Market Law, which present the commencement of the energy sector reform (www.mingo.hr).(author)

Innovative approach for achieving of sustainable urban water supply system by using of solar photovoltaic energy

Directory of Open Access Journals (Sweden)

Jure Margeta

2017-01-01

Full Text Available Paper describes and analyses new and innovative concept for possible integration of solar photovoltaic (PV energy in urban water supply system (UWSS. Proposed system consists of PV generator and invertor, pump station and water reservoir. System is sized in such a manner that every his part is sized separately and after this integrated into a whole. This integration is desirable for several reasons, where the most important is the achievement of the objectives of sustainable living in urban areas i.e. achieving of sustainable urban water supply system. The biggest technological challenge associated with the use of solar, wind and other intermittent renewable energy sources RES is the realization of economically and environmentally friendly electric energy storage (EES. The paper elaborates the use of water reservoires in UWSS as EES. The proposed solution is still more expensive than the traditional and is economically acceptable today in the cases of isolated urban water system and special situations. Wider application will depend on the future trends of energy prices, construction costs of PV generators and needs for CO2 reduction by urban water infrastructure.

Higher energy: is it necessary, is it worth the cost for radiation oncology?

Science.gov (United States)

Das, I J; Kase, K R

1992-01-01

The physical characteristics of the interactions of megavoltage photons and electrons with matter provide distinct advantages, relative to low-energy (orthovoltage) x rays, that lead to better radiation dose distributions in patients. Use of these high-energy radiations has resulted in better patient care, which has been reflected in improved radiation treatment outcome in recent years. But, as the desire for higher energy radiation beams increases, it becomes important to determine whether the physical characteristics that make megavoltage beams beneficial continue to provide a net advantage. It is demonstrated that, in fact, there is an energy range from 4 to 15 MV for photons and 4 to 20 MeV for electrons that is optimally suited for the treatment of cancer in humans. Radiation beams that exceed these maximum energies were found to add no advantage. This is because the costs (price of unit, installation, maintenance, shielding for neutron and photons) are not justified by either improved physical characteristics of the radiation (penetration, skin sparing, dose distribution) or treatment outcome. In fact, for photon beams some physical characteristics result in less desirable dose distributions, less accurate dosimetry, and increased safety problems as the energy increases for example, increasingly diffuse beam edges, loss of electron equilibrium, uncertainty in dose perturbations at interfaces, increased neutron contamination, and potential for higher personnel dose. The special features that make electron beams useful at lower energies, for example, skin sparing and small penetration, are lost at high energies. These physical factors are analyzed together with the economic factors related to radiation therapy patient care using megavoltage beams.

Achieving a 100% Renewable Grid: Operating Electric Power Systems with Extremely High Levels of Variable Renewable Energy

Energy Technology Data Exchange (ETDEWEB)

Kroposki, Benjamin; Johnson, Brian; Zhang, Yingchen; Gevorgian, Vahan; Denholm, Paul; Hodge, Bri-Mathias; Hannegan, Bryan

2017-03-01

What does it mean to achieve a 100% renewable grid? Several countries already meet or come close to achieving this goal. Iceland, for example, supplies 100% of its electricity needs with either geothermal or hydropower. Other countries that have electric grids with high fractions of renewables based on hydropower include Norway (97%), Costa Rica (93%), Brazil (76%), and Canada (62%). Hydropower plants have been used for decades to create a relatively inexpensive, renewable form of energy, but these systems are limited by natural rainfall and geographic topology. Around the world, most good sites for large hydropower resources have already been developed. So how do other areas achieve 100% renewable grids? Variable renewable energy (VRE), such as wind and solar photovoltaic (PV) systems, will be a major contributor, and with the reduction in costs for these technologies during the last five years, large-scale deployments are happening around the world.

Energy neutral protocol based on hierarchical routing techniques for energy harvesting wireless sensor network

Science.gov (United States)

Muhammad, Umar B.; Ezugwu, Absalom E.; Ofem, Paulinus O.; Rajamäki, Jyri; Aderemi, Adewumi O.

2017-06-01

Recently, researchers in the field of wireless sensor networks have resorted to energy harvesting techniques that allows energy to be harvested from the ambient environment to power sensor nodes. Using such Energy harvesting techniques together with proper routing protocols, an Energy Neutral state can be achieved so that sensor nodes can run perpetually. In this paper, we propose an Energy Neutral LEACH routing protocol which is an extension to the traditional LEACH protocol. The goal of the proposed protocol is to use Gateway node in each cluster so as to reduce the data transmission ranges of cluster head nodes. Simulation results show that the proposed routing protocol achieves a higher throughput and ensure the energy neutral status of the entire network.

Academic Self-Concept, Achievement Goals, and Achievement: Is Their Relation the Same for Academic Achievers and Underachievers?

Science.gov (United States)

Preckel, Franzis; Brunner, Martin

2015-01-01

This longitudinal study investigated the contribution of achievement goals and academic self-concept for the prediction of unexpected academic achievement (i.e., achievement that is higher or lower than expected with respect to students' cognitive ability) in general and when comparing groups of extreme over- and underachievers. Our sample…

Parental Level of Education: Associations with Psychological Well-Being, Academic Achievement and Reasons for Pursuing Higher Education in Adolescence

Science.gov (United States)

Schlechter, Melissa; Milevsky, Avidan

2010-01-01

The purpose of the current study is to determine the interconnection between parental level of education, psychological well-being, academic achievement and reasons for pursuing higher education in adolescents. Participants included 439 college freshmen from a mid-size state university in the northeastern USA. A survey, including indices of…

Assessing Multiple Pathways for Achieving China’s National Emissions Reduction Target

Directory of Open Access Journals (Sweden)

Mingyue Wang

2018-06-01

Full Text Available In order to achieve China’s target of carbon intensity emissions reduction in 2030, there is a need to identify a scientific pathway and feasible strategies. In this study, we used stochastic frontier analysis method of energy efficiency, incorporating energy structure, economic structure, human capital, capital stock and potential energy efficiency to identify an efficient pathway for achieving emissions reduction target. We set up 96 scenarios including single factor scenarios and multi-factors combination scenarios for the simulation. The effects of each scenario on achieving the carbon intensity reduction target are then evaluated. It is found that: (1 Potential energy efficiency has the greatest contribution to the carbon intensity emissions reduction target; (2 they are unlikely to reach the 2030 carbon intensity reduction target of 60% by only optimizing a single factor; (3 in order to achieve the 2030 target, several aspects have to be adjusted: the fossil fuel ratio must be lower than 80%, and its average growth rate must be decreased by 2.2%; the service sector ratio in GDP must be higher than 58.3%, while the growth rate of non-service sectors must be lowered by 2.4%; and both human capital and capital stock must achieve and maintain a stable growth rate and a 1% increase annually in energy efficiency. Finally, the specific recommendations of this research were discussed, including constantly improved energy efficiency; the upgrading of China’s industrial structure must be accelerated; emissions reduction must be done at the root of energy sources; multi-level input mechanisms in overall levels of education and training to cultivate the human capital stock must be established; investment in emerging equipment and accelerate the closure of backward production capacity to accumulate capital stock.

Achieving high baryon densities in the fragmentation regions in heavy ion collisions at top RHIC energy

International Nuclear Information System (INIS)

Li, Ming; Kapusta, Joseph I.

2017-01-01

Heavy ion collisions at extremely high energy, such as the top energy at RHIC, exhibit the property of transparency where there is a clear separation between the almost net-baryon-free central rapidity region and the net-baryon-rich fragmentation region. We calculate the net-baryon rapidity loss and the nuclear excitation energy using the energy-momentum tensor obtained from the McLerran-Venugopalan model. Nuclear compression during the collision is further estimated using a simple space-time picture. The results show that extremely high baryon densities, about twenty times larger than the normal nuclear density, can be achieved in the fragmentation regions. (paper)

Millimeter and Submillimeter Wave Spectroscopy of Higher Energy Conformers of 1,2-PROPANEDIOL

Science.gov (United States)

Zakharenko, Olena; Bossa, Jean-Baptiste; Lewen, Frank; Schlemmer, Stephan; Müller, Holger S. P.

2017-06-01

We have performed a study of the millimeter/submillimeter wave spectrum of four higher energy conformers of 1,2-propanediol (continuation of the previous study on the three lowest energy conformers. The present analysis of rotational transitions carried out in the frequency range 38 - 400 GHz represents a significant extension of previous microwave work. The new data were combined with previously-measured microwave transitions and fitted using a Watson's S-reduced Hamiltonian. The final fits were within experimental accuracy, and included spectroscopic parameters up to sixth order of angular momentum, for the ground states of the four higher energy conformers following previously studied ones: g'Ga, gG'g', aGg' and g'Gg. The present analysis provides reliable frequency predictions for astrophysical detection of 1,2-propanediol by radio telescope arrays at millimeter wavelengths. J.-B. Bossa, M.H. Ordu, H.S.P. Müller, F. Lewen, S. Schlemmer, A&A 570 (2014) A12)

Achieving better energy-efficient air conditioning – A review of technologies and strategies

International Nuclear Information System (INIS)

Chua, K.J.; Chou, S.K.; Yang, W.M.; Yan, J.

2013-01-01

Air conditioning is essential for maintaining thermal comfort in indoor environments, particularly for hot and humid climates. Today, air conditioning, comprising cooling and dehumidification, has become a necessity in commercial and residential buildings and industrial processes. It accounts for a major share of the energy consumption of a building or facility. In tropical climates, the energy consumed by heating, ventilation and air-conditioning (HVAC) can exceed 50% of the total energy consumption of a building. This significant figure is primarily due to the heavy duty placed on cooling technologies to remove both sensible and latent heat loads. Therefore, there is tremendous potential to improve the overall efficiency of the air-conditioning systems in buildings. Based on today’s practical technology for cooling, the major components of a chiller plant are (1) compressors, (2) cooling towers, (3) pumps (chilled and cooling water) and (4) fans in air handling units. They all consume mainly electricity to operate. When specifying the kW/R ton of a plant, there are two levels of monitoring cooling efficiency: (1) at the efficiency of the chiller machines or the compressors which consume a major amount of electricity; and (2) at the overall efficiency of cooling plants which include the cooling towers, pumps for moving coolant (chilled and cooling water) to all air-handling units. Pragmatically, a holistic approach is necessary towards achieving a low energy input per cooling achieved such as 0.6 kW/R ton cooling or lower by considering all aspects of the cooling plant. In this paper, we present a review of recent innovative cooling technology and strategies that could potentially lower the kW/R ton of cooling systems – from the existing mean of 0.9 kW/R ton towards 0.6 kW/R ton or lower. The paper, broadly divided into three key sections (see Fig. 2), begins with a review of the recent novel devices that enhances the energy efficiency of cooling systems at

Simulation Analysis of China’s Energy and Industrial Structure Adjustment Potential to Achieve a Low-carbon Economy by 2020

Directory of Open Access Journals (Sweden)

Nan Xiang

2013-11-01

Full Text Available To achieve a low-carbon economy, China has committed to reducing its carbon dioxide (CO2 emissions per unit of gross domestic product (GDP by 40%–45% by 2020 from 2005 levels and increasing the share of non-fossil fuels in primary energy consumption to approximately 15%. It is necessary to investigate whether this plan is suitable and how this target may be reached. This paper verifies the feasibility of achieving the CO2 emission targets by energy and industrial structure adjustments, and proposes applicable measures for further sustainable development by 2020 through comprehensive simulation. The simulation model comprises three sub-models: an energy flow balance model, a CO2 emission model, and a socio-economic model. The model is constructed based on input-output table and three balances (material, value, and energy flow balance, and it is written in LINGO, a linear dynamic programming language. The simulation results suggest that China’s carbon intensity reduction promise can be realized and even surpassed to 50% and that economic development (annual 10% GDP growth rate can be achieved if energy and industrial structure are adjusted properly by 2020. However, the total amount of CO2 emission will reach a relatively high level—13.68 billion tons—which calls for further sound approaches to realize a low carbon economy, such as energy utilization efficiency improvement, technology innovation, and non-fossil energy’s utilization.

New 2-stage ion microprobes and a move to higher energies

Energy Technology Data Exchange (ETDEWEB)

Legge, G.J.F.; Dymnikov, A.; Moloney, G.; Saint, A. [Melbourne Univ., Parkville, VIC (Australia). School of Physics; Cohen, D. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

1996-12-31

Recent moves in Ion Beam Microanalysis towards the use of a rapidly growing number of very high resolution, low current and single ion techniques has led to the need for high demagnification and greatly improved beam quality. There is also a move to apply Microbeams at higher energies and with heavier ions. This also puts demands on the focusing system and beam control. This paper describes the recent development of 2-stage lens systems to be applied here and overseas, both at very high resolution and at high energies with heavy ions. It looks at new ion beam analysis applications of such ion microprobes. 8 refs., 1 tab., 1 fig.

New 2-stage ion microprobes and a move to higher energies

Energy Technology Data Exchange (ETDEWEB)

Legge, G J.F.; Dymnikov, A; Moloney, G; Saint, A [Melbourne Univ., Parkville, VIC (Australia). School of Physics; Cohen, D [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

1997-12-31

Recent moves in Ion Beam Microanalysis towards the use of a rapidly growing number of very high resolution, low current and single ion techniques has led to the need for high demagnification and greatly improved beam quality. There is also a move to apply Microbeams at higher energies and with heavier ions. This also puts demands on the focusing system and beam control. This paper describes the recent development of 2-stage lens systems to be applied here and overseas, both at very high resolution and at high energies with heavy ions. It looks at new ion beam analysis applications of such ion microprobes. 8 refs., 1 tab., 1 fig.

Developments in greenhouse gas emissions and net energy use in Danish agriculture - How to achieve substantial CO2 reductions?

International Nuclear Information System (INIS)

Dalgaard, T.; Olesen, J.E.; Petersen, S.O.; Petersen, B.M.; Jorgensen, U.; Kristensen, T.; Hutchings, N.J.; Gyldenkaerne, S.; Hermansen, J.E.

2011-01-01

Greenhouse gas (GHG) emissions from agriculture are a significant contributor to total Danish emissions. Consequently, much effort is currently given to the exploration of potential strategies to reduce agricultural emissions. This paper presents results from a study estimating agricultural GHG emissions in the form of methane, nitrous oxide and carbon dioxide (including carbon sources and sinks, and the impact of energy consumption/bioenergy production) from Danish agriculture in the years 1990-2010. An analysis of possible measures to reduce the GHG emissions indicated that a 50-70% reduction of agricultural emissions by 2050 relative to 1990 is achievable, including mitigation measures in relation to the handling of manure and fertilisers, optimization of animal feeding, cropping practices, and land use changes with more organic farming, afforestation and energy crops. In addition, the bioenergy production may be increased significantly without reducing the food production, whereby Danish agriculture could achieve a positive energy balance. - Highlights: → GHG emissions from Danish agriculture 1990-2010 are calculated, including carbon sequestration. → Effects of measures to further reduce GHG emissions are listed. → Land use scenarios for a substantially reduced GHG emission by 2050 are presented. → A 50-70% reduction of agricultural emissions by 2050 relative to 1990 is achievable. → Via bioenergy production Danish agriculture could achieve a positive energy balance. - Scenario studies of greenhouse gas mitigation measures illustrate the possible realization of CO 2 reductions for Danish agriculture by 2050, sustaining current food production.

Used energy-related laboratory equipment grant program for institutions of higher learning. Eligible equipment catalog

Energy Technology Data Exchange (ETDEWEB)

1994-07-01

This is a listing of energy related equipment available through the Energy-Related Laboratory Equipment Grant Program which grants used equipment to institutions of higher education for energy-related research. Information included is an overview of the program, how to apply for a grant of equipment, eligibility requirements, types of equipment available, and the costs for the institution.

Fundamental research on sintering technology with super deep bed achieving energy saving and reduction of emissions

International Nuclear Information System (INIS)

Hongliang Han; Shengli Wu; Gensheng Feng; Luowen Ma; Weizhong Jiang

2012-01-01

In the general frame of energy saving, environment protection and the concept of circular economy, the fundamental research on the sintering technology with super deep bed, achieving energy saving and emission reduction, was carried out. At first, the characteristics of the process and exhaust emission in the sintering with super deep bed was mastered through the study of the influence of different bed depths on the sintering process. Then, considering the bed permeability and the fuel combustion, their influence on the sinter yield and quality, their potential for energy saving and emission reduction was studied. The results show that the improvement of the bed permeability and of the fuel combustibility respectively and simultaneously, leads to an improvement of the sintering technical indices, to energy saving and emission reduction in the condition of super deep bed. At 1000 mm bed depth, and taking the appropriate countermeasure, it is possible to decrease the solid fuel consumption and the emission of CO 2 , SO 2 , NO x by 10.08%, 11.20%, 22.62% and 25.86% respectively; and at 700 mm bed depth, it is possible to reduce the solid fuel consumption and the emission of CO 2 , SO 2 , NO x by 20.71%, 22.01%, 58.86% and 13.13% respectively. This research provides the theoretical and technical basis for the new technology of sintering with super deep bed, achieving energy saving and reduction of emission. (authors)

Achieving Self-Reliance: Backyard Energy Lessons.

Science.gov (United States)

Cook, Stephen

Appropriate technology (the process most appropriate for local cultural, economic, and social conditions) is geared toward projects which: are small in scale, decentralized, and energy efficient; use local materials, labor, and ingenuity; are not capital-intensive; and maximize the use of renewable energy resources. Descriptions of such projects…

Two-loop finiteness of self-energies in higher-derivative SQED3

Directory of Open Access Journals (Sweden)

E.A. Gallegos

2015-09-01

Full Text Available In the N=1 superfield formalism, two higher-derivative kinetic operators (Lee–Wick operators are implemented into the standard three dimensional supersymmetric quantum electrodynamics (SQED3 for improving its ultraviolet behavior. It is shown in particular that the ghosts associated with these Lee–Wick operators allow to remove all ultraviolet divergences in the scalar and gauge self-energies at two-loop level.

Renewable Energy in China

Directory of Open Access Journals (Sweden)

Valery I. Salygin

2015-01-01

Full Text Available China is the most densely populated country in the world with high rate of economic growth resulting in higher demand for energy resources and in strive to guarantee stable supply of these resources. Chinese annual GDP growth in 2012 and 2013 was down to 7.7% comparing to 10% in 2000-2011 [7]. In 2012 and 2013 economic growth stumbled because of slowdown in manufacturing and exports, taking into account that Chinese government was eager to cut inflation and excessive investments in some segments of the market. Speaking about energy sector Chinese government is aimed at promotion of market-based pricing systems, activities for advanced energy efficiency and higher competition between energy companies, and increased investment in renewable energy resources. Considering renewables as one of many ways to diversify energy supplies, lower dependence on coal and improve environmental situation Chinese government actively supports and develops programs aimed at support of renewable energy industry in China. Chinese economic development is tightly attached to five-year plans. It seems important to mention the fact that main energy goals for current 12-th "five-year plan" are to achieve 15% renewables consumption and CO2 sequestration up to 40-45% by2020 in order to lower dependency on coal and improve environmental situation. As a result of Chinese state policy to develop renewables China achieved certain results in wind energy, helioenergetics, hydroenergetics and energy from waste recycling.

Achieving competitive excellence in nuclear energy: The threat of proliferation; the challenge of inertial confinement fusion

International Nuclear Information System (INIS)

Nuckolls, J.H.

1994-06-01

Nuclear energy will have an expanding role in meeting the twenty-first-century challenges of population and economic growth, energy demand, and global warming. These great challenges are non-linearly coupled and incompletely understood. In the complex global system, achieving competitive excellence for nuclear energy is a multi-dimensional challenge. The growth of nuclear energy will be driven by its margin of economic advantage, as well as by threats to energy security and by growing evidence of global warming. At the same time, the deployment of nuclear energy will be inhibited by concerns about nuclear weapons proliferation, nuclear waste and nuclear reactor safety. These drivers and inhibitors are coupled: for example, in the foreseeable future, proliferation in the Middle East may undermine energy security and increase demand for nuclear energy. The Department of Energy's nuclear weapons laboratories are addressing many of these challenges, including nuclear weapons builddown and nonproliferation, nuclear waste storage and burnup, reactor safety and fuel enrichment, global warming, and the long-range development of fusion energy. Today I will focus on two major program areas at the Lawrence Livermore National Laboratory (LLNL): the proliferation of nuclear weapons and the development of inertial confinement fusion (ICF) energy

New conceptual copper alloy bearing for diesel engine to achieve longer life under higher load; Diesel engine yo komen`atsu chojumyo jikuuke no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Tomikawa, T; Oshiro, H; Hashizume, K; Kamiya, S [Taiho Kogyo Co. Ltd., Aichi (Japan)

1997-10-01

Recently, the requirement like higher output, lower fuel consumption and cleaner exhaust gas for automotive engines has been increased. As a result, especially, higher bearing performance is required for diesel engine under a higher unit load and longer period. For this reason, we have developed the new conceptual copper alloy bearing to achieve higher performance under a higher unit load. This paper describes about the performance of this new bearing material. 3 refs., 12 figs., 5 tabs.

Effects of Traditional, Blended and E-Learning on Students' Achievement in Higher Education

Science.gov (United States)

Al-Qahtani, Awadh A. Y.; Higgins, S. E.

2013-01-01

The study investigates the effect of e-learning, blended learning and classroom learning on students' achievement. Two experimental groups together with a control group from Umm Al-Qura University in Saudi Arabia were identified randomly. To assess students' achievement in the different groups, pre- and post-achievement tests were used. The…

Energy Charter as means of achieving sustainable energy production and consumption

Energy Technology Data Exchange (ETDEWEB)

Lubbers, R.F.M.

1995-12-31

The present paper deals with the European Energy Charter covering policy agreements on energy efficiency and relating environmental aspects. The Energy Charter was signed by the participating countries in 1994

Developments in greenhouse gas emissions and net energy use in Danish agriculture - How to achieve substantial CO{sub 2} reductions?

Energy Technology Data Exchange (ETDEWEB)

Dalgaard, T., E-mail: tommy.dalgaard@agrsci.dk [Aarhus University, Department of Agroecology, Blichers Alle 20, P.O. Box 50, DK-8830 Tjele (Denmark); Olesen, J.E.; Petersen, S.O.; Petersen, B.M.; Jorgensen, U.; Kristensen, T.; Hutchings, N.J. [Aarhus University, Department of Agroecology, Blichers Alle 20, P.O. Box 50, DK-8830 Tjele (Denmark); Gyldenkaerne, S. [Aarhus University, National Environmental Research Institute, Frederiksborgvej 399, DK-4000 Roskilde (Denmark); Hermansen, J.E. [Aarhus University, Department of Agroecology, Blichers Alle 20, P.O. Box 50, DK-8830 Tjele (Denmark)

2011-11-15

Greenhouse gas (GHG) emissions from agriculture are a significant contributor to total Danish emissions. Consequently, much effort is currently given to the exploration of potential strategies to reduce agricultural emissions. This paper presents results from a study estimating agricultural GHG emissions in the form of methane, nitrous oxide and carbon dioxide (including carbon sources and sinks, and the impact of energy consumption/bioenergy production) from Danish agriculture in the years 1990-2010. An analysis of possible measures to reduce the GHG emissions indicated that a 50-70% reduction of agricultural emissions by 2050 relative to 1990 is achievable, including mitigation measures in relation to the handling of manure and fertilisers, optimization of animal feeding, cropping practices, and land use changes with more organic farming, afforestation and energy crops. In addition, the bioenergy production may be increased significantly without reducing the food production, whereby Danish agriculture could achieve a positive energy balance. - Highlights: > GHG emissions from Danish agriculture 1990-2010 are calculated, including carbon sequestration. > Effects of measures to further reduce GHG emissions are listed. > Land use scenarios for a substantially reduced GHG emission by 2050 are presented. > A 50-70% reduction of agricultural emissions by 2050 relative to 1990 is achievable. > Via bioenergy production Danish agriculture could achieve a positive energy balance. - Scenario studies of greenhouse gas mitigation measures illustrate the possible realization of CO{sub 2} reductions for Danish agriculture by 2050, sustaining current food production.

Achieving the optimal performance of the CMS ECAL in Run II

CERN Document Server

Sun, Menglei

2016-01-01

Many physics analyses using the Compact Muon Solenoid (CMS) detector at the LHC require accurate, high resolution electron and photon energy measurements. Particularly important are decays of the Higgs boson resulting in electromagnetic particles in the final state. Di-photon events in CMS are also a very important channel in the search for Higgs boson production in association with other particles or in the search for possible new resonances of higher mass. The requirement for high performance electromagnetic calorimetry therefore remains high during LHC Run II. Following the excellent performance achieved in Run~I at a center of mass energy of 7 and 8 TeV, the CMS electromagnetic calorimeter (ECAL) started operating at the LHC in Spring 2015 with proton-proton collisions at 13 TeV center-of-mass energy. The instantaneous luminosity delivered by the LHC during Run~II is expected to exceed the levels achieved in Run I, using 25 ns bunch spacing. The average number of concurrent proton-proton collisions per bu...

Achieving High-Energy-High-Power Density in a Flexible Quasi-Solid-State Sodium Ion Capacitor.

Science.gov (United States)

Li, Hongsen; Peng, Lele; Zhu, Yue; Zhang, Xiaogang; Yu, Guihua

2016-09-14

Simultaneous integration of high-energy output with high-power delivery is a major challenge for electrochemical energy storage systems, limiting dual fine attributes on a device. We introduce a quasi-solid-state sodium ion capacitor (NIC) based on a battery type urchin-like Na2Ti3O7 anode and a capacitor type peanut shell derived carbon cathode, using a sodium ion conducting gel polymer as electrolyte, achieving high-energy-high-power characteristics in solid state. Energy densities can reach 111.2 Wh kg(-1) at power density of 800 W kg(-1), and 33.2 Wh kg(-1) at power density of 11200 W kg(-1), which are among the best reported state-of-the-art NICs. The designed device also exhibits long-term cycling stability over 3000 cycles with capacity retention ∼86%. Furthermore, we demonstrate the assembly of a highly flexible quasi-solid-state NIC and it shows no obvious capacity loss under different bending conditions.

Ups and downs in mood and energy: Associations with academic outcomes in higher education

Directory of Open Access Journals (Sweden)

Ben Bullock

2015-08-01

Full Text Available Individual differences in mood and energy may affect academic outcomes in higher education. With little previous research investigating this relationship it is not known whether mood and energy traits help or hinder academic performance. The current study addresses this gap in the literature by investigating ups (high mood and energy and downs (low mood and energy in a small sample of University students in their first year of a psychology degree. The results suggest that low mood and energy traits may be detrimental to academic performance. High mood and energy traits however, were not associated with academic performance. Implications of the findings, in particular those regarding low mood and energy, are that, unlike the trait itself, the behaviours associated with the trait (e.g., procrastination, distraction, low motivation are amenable to change through psychological interventions. Several of these interventions are discussed. 

Case study: Comparison of motivation for achieving higher performance between self-directed and manager-directed aerospace engineering teams

Science.gov (United States)

Erlick, Katherine

"The stereotype of engineers is that they are not people oriented; the stereotype implies that engineers would not work well in teams---that their task emphasis is a solo venture and does not encourage social aspects of collaboration" (Miner & Beyerlein, 1999, p. 16). The problem is determining the best method of providing a motivating environment where design engineers may contribute within a team in order to achieve higher performance in the organization. Theoretically, self-directed work teams perform at higher levels. But, allowing a design engineer to contribute to the team while still maintaining his or her anonymity is the key to success. Therefore, a motivating environment must be established to encourage greater self-actualization in design engineers. The purpose of this study is to determine the favorable motivational environment for design engineers and describe the comparison between two aerospace design-engineering teams: one self-directed and the other manager directed. Following the comparison, this study identified whether self-direction or manager-direction provides the favorable motivational environment for operating as a team in pursuit of achieving higher performance. The methodology used in this research was the case study focusing on the team's levels of job satisfaction and potential for higher performance. The collection of data came from three sources, (a) surveys, (b) researcher observer journal and (c) collection of artifacts. The surveys provided information regarding personal behavior characteristics, potentiality for higher performance and motivational attributes. The researcher journal provided information regarding team dynamics, individual interaction, conflict and conflict resolution. The milestone for performance was based on the collection of artifacts from the two teams. The findings from this study illustrated that whether the team was manager-directed or self-directed does not appear to influence the needs and wants of the

Energy efficiency achievements in China's industrial and transport sectors: How do they rate?

International Nuclear Information System (INIS)

Wu, Libo; Huo, Hong

2014-01-01

China is experiencing intensified industrialisation and motorisation. In the world's largest emerging economy, energy efficiency is expected to play a critical role in the ever-rising demand for energy. Based on factual overviews and numerical analysis, this article carries out an in-depth investigation into the effectiveness of policies announced or implemented in recent decades targeted at energy conservation in the energy intensive manufacturing and transportation sectors. It highlights nine energy intensive sectors that achieved major improvements in their energy technology efficiency efforts. Under the umbrella of the 11th Five-Year Plan, these sectors' performances reflect the effectiveness of China's energy conservation governance. Numerous actions have been taken in China to reduce the road transport sector's demand for energy and its GHG emissions by implementing fuel economy standards, promoting advanced energy efficient vehicles, and alternative fuels. Coal-based energy saving technologies, especially industrial furnace technologies, are critical for China's near and medium-term energy saving. In the long run, renewable energy development and expanding the railway transport system are the most effective ways to reduce energy use and GHG emissions in China. Fuel economy standards could reduce oil consumption and GHGs by 34–35 per cent. - Highlights: • This article makes an investigation into the effectiveness of energy conservation policies in China. • Efficiency improvement reflects the effective governance of energy conservation in China. • Numerous actions have been taken to reduce the road transport sector's demand for energy. • Coal-based energy saving technologies are critical for China's near and medium-term energy saving. • In the long run, renewable energy and expanding the railway transport system are the most effective ways

Investigating the relationships between approaches to learning, learner identities and academic achievement in higher education

DEFF Research Database (Denmark)

Herrmann, Kim Jesper; Bager-Elsborg, Anna; McCune, Velda

2017-01-01

This paper considers relationships between approaches to learning, learner identities, self-efficacy beliefs and academic achievement in higher education. In addition to already established survey instruments, a new scale, subject area affinity, was developed. The scale explores the extent to which...... students identify with their area of study and imagine being part of it in future. The new scale showed strong psychometric properties when it was tested on a sample of 4377 students at a research-intensive university. The new scale correlated positively with both the deep approach and self-efficacy scales....... The new scale also correlated negatively with the surface approach scale. K-means cluster analysis identified seven distinct groups of students who espoused interpretable combinations of approaches, self-efficacy and subject area affinity. Cluster membership was associated with differences in academic...

Achieving Realistic Energy and Greenhouse Gas Emission Reductions in U.S. Cities

Science.gov (United States)

Blackhurst, Michael F.

2011-12-01

In recognizing that energy markets and greenhouse gas emissions are significantly influences by local factors, this research examines opportunities for achieving realistic energy greenhouse gas emissions from U.S. cities through provisions of more sustainable infrastructure. Greenhouse gas reduction opportunities are examined through the lens of a public program administrator charged with reducing emissions given realistic financial constraints and authority over emissions reductions and energy use. Opportunities are evaluated with respect to traditional public policy metrics, such as benefit-cost analysis, net benefit analysis, and cost-effectiveness. Section 2 summarizes current practices used to estimate greenhouse gas emissions from communities. I identify improved and alternative emissions inventory techniques such as disaggregating the sectors reported, reporting inventory uncertainty, and aligning inventories with local organizations that could facilitate emissions mitigation. The potential advantages and challenges of supplementing inventories with comparative benchmarks are also discussed. Finally, I highlight the need to integrate growth (population and economic) and business as usual implications (such as changes to electricity supply grids) into climate action planning. I demonstrate how these techniques could improve decision making when planning reductions, help communities set meaningful emission reduction targets, and facilitate CAP implementation and progress monitoring. Section 3 evaluates the costs and benefits of building energy efficiency are estimated as a means of reducing greenhouse gas emissions in Pittsburgh, PA and Austin, TX. Two policy objectives were evaluated: maximize GHG reductions given initial budget constraints or maximize social savings given target GHG reductions. This approach explicitly evaluates the trade-offs between three primary and often conflicting program design parameters: initial capital constraints, social savings

Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Cold Climates

Energy Technology Data Exchange (ETDEWEB)

Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Florida Solar Energy Center (FSEC); IBACOS; National Renewable Energy Laboratory (NREL)

2006-08-01

The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in Cold Climates on a cost-neutral basis.

Developing Students' Energy Literacy in Higher Education

Science.gov (United States)

Cotton, Debby R. E.; Miller, Wendy; Winter, Jennie; Bailey, Ian; Sterling, Stephen

2015-01-01

Purpose: This paper aims to investigate students' energy literacy at a UK university, and recommends ways in which it can be enhanced using a behaviour change model. Developing students' energy literacy is a key part of the "greening" agenda, yet little is known about how students develop their ideas about energy use and energy saving at…

Multiphase Nano-Composite Coatings for Achieving Energy Optimization

Energy Technology Data Exchange (ETDEWEB)

Nainaparampil, Jose

2012-03-26

UES Inc. and ANL teamed in this work to develop novel coating systems for the protection of surfaces from thermal degradation mainly in two applications; Machining and Die casting. These coatings were specifically designed for the purpose by incorporating required material phases and the overall architecture, which led to reduce the energy usage and increase efficiency of the operations. Following the UES/ANL's feasibility work, the coatings were developed utilizing High power impulse magnetron sputtering (HiPMS) and Large area filtered arc deposition (LAFAD) techniques. Toughness, hardness and oxidation resistance: contrasting qualities have been mixed in the right proportion to attain the suitable material characteristic for the cause. Hafnium diboride (HfB2) based materials provided such a system and its properties were tamed to attain the right combination of toughness and hardness by working on the microstructure and architecture of coatings. An effective interfacing material (graded concentrations of topcoat) was also achieved in this work to provide the required adhesion between the substrate and the coating. Combination of an appropriate bond coat and a functional top coat provided the present thermal degradation resistant coating for cutting tools and die-casting applications. Laboratory level performance tests and industrial level application tests by partner companies (Beta Site Testing) were used for the development of these coatings.

Energy conservation in industrial buildings. Higher energy efficiency with smart control systems; Energieeinsparung im Gewerbebau. Hoehere Energieeffizienz durch 'intelligente' Regeltechnik

Energy Technology Data Exchange (ETDEWEB)

Mayer, Edgar [CentraLine c/o Honeywell GmbH, Schoenaich (Germany)

2009-07-01

With smart control systems, the energy conservation potential of industrial buildings could be fully utilized. This means, e.g., that classic control algorithms must be replaced by new solutions. New methods will ensure higher energy efficiency with maximum comfort; they will also prolong the service life and the inspection intervals of the technical facilities. (orig.)

Higher Education Quality Assessment Model: Towards Achieving Educational Quality Standard

Science.gov (United States)

Noaman, Amin Y.; Ragab, Abdul Hamid M.; Madbouly, Ayman I.; Khedra, Ahmed M.; Fayoumi, Ayman G.

2017-01-01

This paper presents a developed higher education quality assessment model (HEQAM) that can be applied for enhancement of university services. This is because there is no universal unified quality standard model that can be used to assess the quality criteria of higher education institutes. The analytical hierarchy process is used to identify the…

Excitation of higher lying energy states in a rubidium DPAL

Science.gov (United States)

Wallerstein, A. J.; Perram, Glen; Rice, Christopher A.

2018-02-01

The spontaneous emission in a cw rubidium diode dumped alkali laser (DPAL) system was analyzed. The fluorescence from higher lying states decreases with additional buffer gas. The intermediate states (7S, 6P, 5D) decay more slowly with buffer gas and scale super-linearly with alkali density. A detailed kinetic model has been constructed, where the dominant mechanisms are energy pooling and single photon ionization. It also includes pumping into the non-Lorentzian wings of absorption profiles, fine structure mixing, collisional de-excitation, and Penning ionization. Effects of ionization in a high powered CW rubidium DPAL were assessed.

Role of green energy towards India's energy security. Paper no. IGEC-1-054

International Nuclear Information System (INIS)

Rawool, A.S.; Mitra, S.K.

2005-01-01

India's energy consumption is growing rapidly for last three decades. The per capita energy consumption is increasing at an average rate of 3.6% per annum for last two decades. Also, the population of India is increasing at a rate of 1.5 % per annum. This makes it clear that conventional fossil fuel based system will not be able to fulfill the demand of energy in future period. To achieve and maintain desired economic and industrial growth rates, reliable supply of required amount of energy at reasonable cost is a necessity. Encouraging use of non-conventional energy sources on a commercial basis can be a major step towards self sufficiency in energy sector. India has a very large potential for developing and utilizing green energy sources such as wind energy, solar energy, geothermal energy, etc. These sources can satisfy India's growing energy demand to a large extent. Fuel cells can serve as a major source of energy with their clean energy production, higher efficiencies, modularity and ability to give reliable supply of energy at constant rates. Thus, fuel cells serve for diversification and localization of energy sources, which is important for energy security. This paper reviews current energy status of India and presents fuel cell as a prospective candidate for achieving energy security. (author)

Numerical investigation of a joint approach to thermal energy storage and compressed air energy storage in aquifers

International Nuclear Information System (INIS)

Guo, Chaobin; Zhang, Keni; Pan, Lehua; Cai, Zuansi; Li, Cai; Li, Yi

2017-01-01

Highlights: •One wellbore-reservoir numerical model was built to study the impact of ATES on CAESA. •With high injection temperature, the joint of ATES can improve CAESA performance. •The considerable utilization of geothermal occurs only at the beginning of operations. •Combination of CAESA and ATES can be achieved in common aquifers. -- Abstract: Different from conventional compressed air energy storage (CAES) systems, the advanced adiabatic compressed air energy storage (AA-CAES) system can store the compression heat which can be used to reheat air during the electricity generation stage. Thus, AA-CAES system can achieve a higher energy storage efficiency. Similar to the AA-CAES system, a compressed air energy storage in aquifers (CAESA) system, which is integrated with an aquifer thermal energy storage (ATES) could possibly achieve the same objective. In order to investigate the impact of ATES on the performance of CAESA, different injection air temperature schemes are designed and analyzed by using numerical simulations. Key parameters relative to energy recovery efficiencies of the different injection schemes, such as pressure distribution and temperature variation within the aquifers as well as energy flow rate in the injection well, are also investigated in this study. The simulations show that, although different injection schemes have a similar overall energy recovery efficiency (∼97%) as well as a thermal energy recovery efficiency (∼79.2%), the higher injection air temperature has a higher energy storage capability. Our results show the total energy storage for the injection air temperature at 80 °C is about 10% greater than the base model scheme at 40 °C. Sensitivity analysis reveal that permeability of the reservoir boundary could have significant impact on the system performance. However, other hydrodynamic and thermodynamic properties, such as the storage reservoir permeability, thermal conductivity, rock grain specific heat and rock

Achieving sustainable buildings: the role of heating, ventilation and air-conditioning

Directory of Open Access Journals (Sweden)

Chaudhry Hassam Nasarullah

2016-01-01

Full Text Available With the ever-increasing population and global economy, the dependency on usage of non-renewable resources of energy is cumulating in direct proportion. Nevertheless, the non-renewable potential of these resources is certainly a leading worldwide issue, and one, which has gained substantial international interest over the past decades. Large and attractive opportunities exist to reduce building's energy use at lower costs and higher returns than other sectors. At the same time, substantial investments will be required to achieve this target as outlined by the Paris Agreement. These will require the combination of social, economic and environmental actions, including building energy codes, investment subsidies, labelling and reporting mechanisms, increased and trained workforce capacity, and evolving energy-efficient designs and HVAC technologies.

The Interplay Among Academic Self-Concept, Self-Efficacy, Self-Regulation and Academic Achievement of Higher Education L2 Learners

OpenAIRE

Özkan KIRMIZI

2015-01-01

Self-concept, self efficacy, and self-regulation are three important factors that predict the success of L2 learners to a large extent. Therefore, the present study was designed to measure the academic self-concept, self efficacy, self-regulation level of higher education students in relation to academic achievement and self-evaluation and secondarily to investigate the correlation between academic self-concept, selfefficacy, and self-regulation. In the present study, academic self-concept wa...

Teager-Kaiser Energy and Higher-Order Operators in White-Light Interference Microscopy for Surface Shape Measurement

Directory of Open Access Journals (Sweden)

Abdel-Ouahab Boudraa

2005-10-01

Full Text Available In white-light interference microscopy, measurement of surface shape generally requires peak extraction of the fringe function envelope. In this paper the Teager-Kaiser energy and higher-order energy operators are proposed for efficient extraction of the fringe envelope. These energy operators are compared in terms of precision, robustness to noise, and subsampling. Flexible energy operators, depending on order and lag parameters, can be obtained. Results show that smoothing and interpolation of envelope approximation using spline model performs better than Gaussian-based approach.

Higher-order terms in the nuclear-energy-density functional

International Nuclear Information System (INIS)

Carlsson, B. G.; Borucki, M.; Dobaczewski, J.

2009-01-01

One of the current projects at the Department of Physics in the University of Jyvaeskylae is to explore more general forms of the Skyrme energy-density functional (EDF). The aim is to find new phenomenological terms which are sensitive to experimental data. In this context we have extended the Skyrme functional by including terms which contain higher orders of derivatives allowing for a better description of finite range effects. This was done by employing an expansion in derivatives in a spherical-tensor formalism [1] motivated by ideas of the density-matrix expansion. The resulting functionals have different number of free parameters depending on the order in derivatives and assumed symmetries, see Fig. 1. The usual Skyrme EDF is obtained as a second order expansion while we keep terms up to sixth order.(author)

Energy conservation achievements by New Shorrock Mills, Ahmedabad

International Nuclear Information System (INIS)

Rawal, N.L.; Trivedi, R.M.

1994-01-01

The New Shorrock Mills, Ahmedabad is a textile mill manufacturing cloth. Managerial practices like energy auditing and energy conservation monitoring introduced to conserve energy are described. Various measures implemented to conserve energy in machines power; carding, winding, warping and sizing operations; auto looms and lighting power are described. Cost reduction in terms of rupees is given. (N.B.)

Giant energy density and high efficiency achieved in bismuth ferrite-based film capacitors via domain engineering.

Science.gov (United States)

Pan, Hao; Ma, Jing; Ma, Ji; Zhang, Qinghua; Liu, Xiaozhi; Guan, Bo; Gu, Lin; Zhang, Xin; Zhang, Yu-Jun; Li, Liangliang; Shen, Yang; Lin, Yuan-Hua; Nan, Ce-Wen

2018-05-08

Developing high-performance film dielectrics for capacitive energy storage has been a great challenge for modern electrical devices. Despite good results obtained in lead titanate-based dielectrics, lead-free alternatives are strongly desirable due to environmental concerns. Here we demonstrate that giant energy densities of ~70 J cm -3 , together with high efficiency as well as excellent cycling and thermal stability, can be achieved in lead-free bismuth ferrite-strontium titanate solid-solution films through domain engineering. It is revealed that the incorporation of strontium titanate transforms the ferroelectric micro-domains of bismuth ferrite into highly-dynamic polar nano-regions, resulting in a ferroelectric to relaxor-ferroelectric transition with concurrently improved energy density and efficiency. Additionally, the introduction of strontium titanate greatly improves the electrical insulation and breakdown strength of the films by suppressing the formation of oxygen vacancies. This work opens up a feasible and propagable route, i.e., domain engineering, to systematically develop new lead-free dielectrics for energy storage.

The effects of higher-order questioning strategies on nonscience majors' achievement in an introductory environmental science course and their attitudes toward the environment

Science.gov (United States)

Eason, Grace Teresa

The purpose of this quasi-experimental study was to determine the effect a higher-order questioning strategy (Bloom, 1956) had on undergraduate non-science majors' attitudes toward the environment and their achievement in an introductory environmental science course, EDS 1032, "Survey of Science 2: Life Science," which was offered during the Spring 2000 term. Students from both treatment and control groups (N = 63), which were determined using intact classes, participated in eight cooperative group activities based on the Biological Sciences Curriculum Studies (BSCS) 5E model (Bybee, 1993). The treatment group received a higher-order questioning method combined with the BSCS 5E model. The control group received a lower-order questioning method, combined with the BSCS 5E model. Two instruments were used to measure students' attitude and achievement changes. The Ecology Issue Attitude (EIA) survey (Schindler, 1995) and a comprehensive environmental science final exam. Kolb's Learning Style Inventory (KLSI, 1985) was used to measure students' learning style type. After a 15-week treatment period, results were analyzed using MANCOVA. The overall MANCOVA model used to test the statistical difference between the collective influences of the independent variables on the three dependent variables simultaneously was found to be not significant at alpha = .05. This differs from findings of previous studies in which higher-order questioning techniques had a significant effect on student achievement (King 1989 & 1992; Blosser, 1991; Redfield and Rousseau, 1981; Gall 1970). At the risk of inflated Type I and Type II error rates, separate univariate analyses were performed. However, none of the research factors, when examined collectively or separately, made any significant contribution to explaining the variability in EIA attitude, EIA achievement, and comprehensive environmental science final examination scores. Nevertheless, anecdotal evidence from student's self

Towards higher transparency and efficiency in energy taxation. Energy taxation and environmental policy in a small open economy

International Nuclear Information System (INIS)

Normann, Goeran

2002-01-01

The accrual of energy taxation has led to a complex structure of taxes and charges that are characterized by instability and low efficiency. Other reasons for analyzing the system is the pressure from our contractual responsibilities within the European Union and the raised ambitions in the environmental policy. The report leads to the conclusion that it would be motivated to separate fiscal energy taxation from measures to internalize environmental costs that the market does not register. This separation would make it possible to create a more transparent and rational energy taxation. The fiscal energy taxation ought to be a broad, value-based tax, equal for all energy sources. Value-based means, besides the energy content in kWh, also properties such as conversion and distribution costs. Two alternatives are suggested for the fiscal energy taxation: A separate consumption tax on energy. Such a tax would amount to 48% to produce the same income as the fiscal elements of today's energy taxes. Another alternative would be to include the fiscal energy tax in the value added tax. This would raise the standard VAT level to 30%, if the lower VAT levels are kept unchanged. With this model, consumption of energy would be treated as any other consumption. The environmental policy measures against greenhouse gases should be delt with through a system with international trade with emission quotas for such gases. Measures against other external effects from energy use are not suggested in this report, except for the opinion that economic incentives are preferable to regulations. The initial allocation of quotas ought to be done through an auction, since this method would give lower national costs than the alternatives. The system should cover all greenhouse gases and (almost) all sources which indicates that an upstream solution would be best with low administrative costs. A safety vent should be considered, so that extreme costs for CO 2 -emissions are avoided, if e.g. the

Summarized achievement report on the Sunshine Project in fiscal 1979. Hydrogen energy; 1979 nendo sunshine keikaku seika hokokusho gaiyoshu. Suiso energy

Energy Technology Data Exchange (ETDEWEB)

NONE

1980-04-01

This paper summarizes the achievement report on the Sunshine Project in fiscal 1979 for hydrogen energy research. In hydrogen manufacturing technologies, the paper describes improvement in membrane performance and discussions on electrode materials in high temperature and pressure electrolysis. In the thermo-chemical method, hydrolysis of iron bromide (II) in the iron system cycle was compared to three kinds of reaction patterns corresponding to phase change, and evaluation was given as the hydrogen generating reaction. In the iodine system the first stage oxidation and reduction reaction of MgO-I{sub 2} was subjected to a continued experiment by using a batch autoclave. Discussions were continued on device materials for the iodine cycle. In the light irradiation electrolytic method for the mixed cycle, the light intensity was experimented at a force 12 times greater than that of the solar beam, and a reaction rate of 80% was achieved. Raising the temperature causes the reaction rate to decline, but it can be supplemented by raising the light intensity. A heat diffusion column was found effective in HI decomposition (hydrogen acquisition). For hydrogen transportation and storage, researches are continued on metal hydrides. In hydrogen utilization technologies, combustion, fuel cells (using high temperature solid and alkaline aqueous solution electrolytes), and hydrogen engines are studied. This paper also describes studies on hydrogen safety assuring measures and energy systems. (NEDO)

Achieving maximum baryon densities

International Nuclear Information System (INIS)

Gyulassy, M.

1984-01-01

In continuing work on nuclear stopping power in the energy range E/sub lab/ approx. 10 GeV/nucleon, calculations were made of the energy and baryon densities that could be achieved in uranium-uranium collisions. Results are shown. The energy density reached could exceed 2 GeV/fm 3 and baryon densities could reach as high as ten times normal nuclear densities

Examples of industrial achievements. [Energy economies

Energy Technology Data Exchange (ETDEWEB)

1982-07-01

Several examples are presented of industrial units concerned by energy economies. The problem, the solution, the energy savings and the financial balance are given for each following case: recuperation of smoke from two glass furnaces with continuous heat and power production; a new type of heating furnace for non-ferrous ingots; heating furnace with smoke recuperation; high-power boiler for very wet barks; smokes to supply heat to buildings and for a dryer; heat pump drying of plaster squares; air-conditioning of a workshop by recuperation on a furnace; dehydration of fodder and beetroot pulp with a straw generator; microprocessor-controlled hot water recuperation in cheese-making; electronic speed regulation for electronic motors.

Sustained availability of trimethoprim in drinking water to achieve higher plasma sulphonamide-trimethoprim antibacterial activity in broilers.

Science.gov (United States)

Sumano, H; Hernandez, L; Gutierrez, L; Bernad-Bernad, M J

2005-02-01

(1) In order to make trimethoprim (TMP) available to broilers throughout the day, a sustained release formulation (SRF) of the drug in the form of granules was added to the water tank that supplies drinking water. (2) Broilers were initially dosed with sulphachloropiridazine-TMP (SCP-TMP 5:1) and then further medicated throughout the day, achieving in the end a dose of 30 mg/kg each of SCP and TMP (group A). Group B received a preparation with the same dose of SCP and TMP (1:1) as group A, but administered as a single dose without the SRF of TMP. Group C received the customary SCP-TMP 5:1 preparation (30 and 6 mg/kg, respectively). Water tanks were completely consumed in 3 to 4 h. (3) Broilers were bled at different times and concentration of antibacterial activity in serum determined by correlating the composite antibacterial activity of SCP and TMP with actual concentrations of these drugs by means of a microbiological agar diffusion assay. (4) Time vs serum concentrations of activity were higher in group B; the increments in the maximum serum concentration for group B over groups A and C being 39 and 67%, respectively. (5) However, the sustained concentration of activity over time, measured as the area under the cu)rve, was highest in group A. Group B had higher values for area under the curve than group C. (6) An additional dose of TMP to achieve 30 mg/kg of both SCP and TMP improves the serum concentration of this combination over the customary 5:1 proportion. The best values for sustaining antibacterial activity were obtained using a 1:1 ratio as in group A. The use of a SRF as in group A may translate into better clinical results.

Higher Dietary Energy Density is Associated with Stunting but not Overweight and Obesity in a Sample of Urban Malaysian Children.

Science.gov (United States)

Shariff, Zalilah Mohd; Lin, Khor Geok; Sariman, Sarina; Siew, Chin Yit; Yusof, Barakatun Nisak Mohd; Mun, Chan Yoke; Lee, Huang Soo; Mohamad, Maznorila

2016-01-01

Although diets with high energy density are associated with increased risk of overweight and obesity, it is not known whether such diets are associated with undernutrition. This study assessed the relationship between dietary energy density (ED) and nutritional status of 745 urban 1- to 10-year-old children. Dietary intakes were obtained using food recall and record for two days. Dietary energy density was based on food and caloric beverages. Higher dietary ED was associated with lower intakes of carbohydrate, sugar, vitamins C and D, and calcium but higher fat, fiber, iron, and folate intakes. While intakes of fruits and milk/dairy products decreased, meat, fish, and legume intakes increased with higher dietary ED. Stunting, but not other growth problems, was associated with higher dietary ED. Future studies should confirm the cause-and-effect relationship between higher dietary ED and stunting.

Achieving the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010

Energy Technology Data Exchange (ETDEWEB)

Thornton, Brian A.; Rosenberg, Michael I.; Richman, Eric E.; Wang, Weimin; Xie, YuLong; Zhang, Jian; Cho, Heejin; Mendon, Vrushali V.; Athalye, Rahul A.; Liu, Bing

2011-05-24

This Technical Support Document presents the energy and cost savings analysis that PNNL conducted to measure the potential energy savings of 90.1-2010 relative to 90.1-2004. PNNL conducted this analysis with inputs from many other contributors and source of information. In particular, guidance and direction was provided by the Simulation Working Group under the auspices of the SSPC90.1. This report documents the approach and methodologies that PNNL developed to evaluate the energy saving achieved from use of ASHRAE/IES Standard 90.1-2010. Specifically, this report provides PNNL’s Progress Indicator process and methodology, EnergyPlus simulation framework, prototype model descriptions. This report covers the combined upgrades from 90.1-2004 to 90.1-2010, resulting in a total of 153 addenda. PNNL has reviewed and considered all 153 addenda for quantitative analysis in the Progress Indicator process. 53 of those are included in the quantitative analysis. This report provides information on the categorization of all of the addenda, a summary of the content, and deeper explanation of the impact and modeling of 53 identified addenda with quantitative savings.

Journal of EEA, Vol. 26, 2009 ENERGY AWARE GPSR ROUTING ...

African Journals Online (AJOL)

Administrator

In a hierarchical architecture, higher energy nodes can be used ... In reality, since nodes consume power even in idle mode, significant overall energy savings can be achieved by turning off ... Figure 3 Virtual grid formations in a GAF. Adaptive ...

The acitretin and methotrexate combination therapy for psoriasis vulgaris achieves higher effectiveness and less liver fibrosis.

Science.gov (United States)

An, Jingang; Zhang, Dingwei; Wu, Jiawen; Li, Jiong; Teng, Xiu; Gao, Xiaomin; Li, Ruilian; Wang, Xiuying; Xia, Linlin; Xia, Yumin

2017-07-01

Both acitretin and methotrexate are effective in ameliorating psoriatic lesion. However, their combination has been seldom reported in the treatment of psoriasis because of the warning regarding the potential hepatotoxicity of the drug interactions. This study was designed to investigate the effectiveness of such combination therapy for psoriasis vulgaris, and the potential benefit as well as side effect during the treatment. Thirty-nine patients with psoriasis vulgaris were treated with acitretin, methotrexate or their combination or as control. Similarly, K14-VEGF transgenic psoriasis-like mice were treated with these drugs. Human primary keratinocytes and hepatic stellate cells were used for analyzing their effect in vitro. The results showed that the combination therapy exhibited higher effectiveness in remitting skin lesion, but did not significantly affect the liver function of both patients and mice. Moreover, the combination groups showed less elevation of profibrotic factors in sera when compared with methotrexate alone groups accordingly. Furthermore, primary keratinocytes expressed more involucrin as well as loricrin and proliferated more slowly on the combined stimulation. Interestingly, such combination treatment induced lower expression of profibrotic factors in hepatic stellate cells. In conclusion, the acitretin-methotrexate combination therapy for psoriasis vulgaris can achieve higher effectiveness and result in less liver fibrosis. Copyright © 2017 Elsevier Ltd. All rights reserved.

Achieving a secure energy future: Environmental and economic issues

International Nuclear Information System (INIS)

Pimentel, David; Herdendorf, M.; Eisenfeld, S.

1994-01-01

Energy, economics, and the environment are interdependent. Land, water, atmospheric, and biological resources are being degraded by current high energy consumption. U.S. energy consumption is the highest in the world and the U.S. Department of Energy reports that the United States has only about 10 years of known and potentially discoverable oil reserves. The U.S. should reduce its energy consumption by one half to help restore the quality of the environment while improving the American standard of living by strengthening the economy and increasing the number of jobs. Because of the interdependence of energy, economics, and the environment, energy efficiency and transition to renewable energy sources are critical. An estimated 40% of current energy consumption could be produced employing solar energy technologies, but would require about 20% of total U.S. land area. Therefore, the development of solar energy technologies to substitute for fossil energy is projected to compete for land required for agriculture and forestry as well as have other environmental impacts

Economic Evaluation of the Information Security Levels Achieved by Electric Energy Providers in North Arctic Region

Science.gov (United States)

Sushko, O. P.; Kaznin, A. A.; Babkin, A. V.; Bogdanov, D. A.

2017-10-01

The study we are conducting involves the analysis of information security levels achieved by energy providers operating in the North Arctic Region. We look into whether the energy providers’ current information security levels meet reliability standards and determine what further actions may be needed for upgrading information security in the context of the digital transformation that the world community is undergoing. When developing the information security systems for electric energy providers or selecting the protection means for them, we are governed by the fact that the assets to be protected are process technologies. While information security risk can be assessed using different methods, the evaluation of the economic damage from these risks appears to be a difficult task. The most probable and harmful risks we have identified when evaluating the electric energy providers’ information security will be used by us as variables. To provide the evaluation, it is necessary to calculate the costs relating to elimination of the risks identified. The final stage of the study will involve the development of an operation algorithm for the North Arctic Region’s energy provider’s business information protection security system - a set of information security services, and security software and hardware.

Leveraging the Power of Experiential Learning to Achieve Higher-Order Proficiencies

Science.gov (United States)

Henderson, Amy

2018-01-01

Although experiential learning approaches, such as service-learning, have been shown to increase student motivation and academic achievement, faculty concerns about the costs of developing and implementing such courses have limited their adoption within economics. One cost that can be eliminated is the opportunity cost typically associated with…

Achievements and Challenges of the Croatian Energy Strategy

International Nuclear Information System (INIS)

Granic, G.

2006-01-01

The paper analyses the past period of about the 10 years from the point of view of strategic considerations, documents drawn up and everything that has been accomplished. This was the period of intensive reforms of the energy sector in the Eu, but also in all other European countries, in particular in the candidate states. The mentioned period is marked by political and economic reforms and intensive economic growth of highly populated countries especially in Asia and dramatic changes in the established geo-balance of energy production and consumption. Among the developments that loom large on energy sector it is important to mention growing terrorism, war in Iraq and Middle East. The analyses carried out in this paper show that the set goals should not be changed because they became universal for all countries which organize their energy sectors based on the open market concept and responsible energy management. Problems are evident in implementation of strategic choices and therefore the emphasis is put on further implementation efforts. The analysis of other factors influencing the energy sector indicate the enhancing international cooperation, ranging from scientific researches to joint energy projects, and for Croatia it translates as a need for stronger integration in all processes and projects on the continent. (author)

Frequency Up-Converted Low Frequency Vibration Energy Harvester Using Trampoline Effect

International Nuclear Information System (INIS)

Ju, S; Chae, S H; Choi, Y; Jun, S; Park, S M; Lee, S; Ji, C-H; Lee, H W

2013-01-01

This paper presents a non-resonant vibration energy harvester based on magnetoelectric transduction mechanism and mechanical frequency up-conversion using trampoline effect. The harvester utilizes a freely movable spherical permanent magnet which bounces off the aluminum springs integrated at both ends of the cavity, achieving frequency up-conversion from low frequency input vibration. Moreover, bonding method of magnetoelectric laminate composite has been optimized to provide higher strain to piezoelectric material and thus obtain a higher output voltage. A proof-of-concept energy harvesting device has been fabricated and tested. Maximum open-circuit voltage of 11.2V has been obtained and output power of 0.57μW has been achieved for a 50kΩ load, when the fabricated energy harvester was hand-shaken

Frequency Up-Converted Low Frequency Vibration Energy Harvester Using Trampoline Effect

Science.gov (United States)

Ju, S.; Chae, S. H.; Choi, Y.; Jun, S.; Park, S. M.; Lee, S.; Lee, H. W.; Ji, C.-H.

2013-12-01

This paper presents a non-resonant vibration energy harvester based on magnetoelectric transduction mechanism and mechanical frequency up-conversion using trampoline effect. The harvester utilizes a freely movable spherical permanent magnet which bounces off the aluminum springs integrated at both ends of the cavity, achieving frequency up-conversion from low frequency input vibration. Moreover, bonding method of magnetoelectric laminate composite has been optimized to provide higher strain to piezoelectric material and thus obtain a higher output voltage. A proof-of-concept energy harvesting device has been fabricated and tested. Maximum open-circuit voltage of 11.2V has been obtained and output power of 0.57μW has been achieved for a 50kΩ load, when the fabricated energy harvester was hand-shaken.

Optimization of thermal insulation to achieve energy savings in low energy house (refurbishment)

International Nuclear Information System (INIS)

Bojić, Milorad; Miletić, Marko; Bojić, Ljubiša

2014-01-01

Highlights: • For buildings that require heating, a thickness of their thermal insulation is optimized. • The objective was to improve energy efficiency of the building. • The optimization is performed by using EnergyPlus and Hooke–Jeeves method. • The embodied energy of thermal insulation and the entire life cycle of the house are taken into account. - Abstract: Due to the current environmental situation, saving energy and reducing CO 2 emission have become the leading drive in modern research. For buildings that require heating, one of the solutions is to optimize a thickness of their thermal insulation and thus improve energy efficiency and reduce energy needs. In this paper, for a small residential house in Serbia, an optimization in the thickness of its thermal insulation layer is investigated by using EnergyPlus software and Hooke–Jeeves direct search method. The embodied energy of thermal insulation is taken into account. The optimization is done for the entire life cycle of thermal insulation. The results show the optimal thickness of thermal insulation that yields the minimum primary energy consumption

EU energy policies achievement by industries in decentralized areas

Science.gov (United States)

Destro, Nicola; Stoppato, Anna; Benato, Alberto; Schiro, Fabio

2017-11-01

Energy Roadmap outlined by the European Commission sets out several routes for a more sustainable, competitive and secure energy system in 2050. All the outlined scenarios consider energy efficiency, renewable energy, nuclear energy and carbon capture and storage. In this paper, more attention has been devoted to the energy efficiency issue, by the identification of new micro and small networks opportunity fed by hybrid plants in the North-East of Italy. National energy balance and national transmission system operator data allowed to collect industrial energy consumptions data on the investigated area. Applying industrial statistics to the local energy needs allows to collect a dataset including consumption information by factory and by company structure (size and employees) for each industrial sector highlighting the factory density in the area. Preliminary outcomes from the model address to the exploitation of local by-product for energy purposes.

Leadership and culture of data governance for the achievement of higher education goals (Case study: Indonesia University of Education)

Science.gov (United States)

Putro, Budi Laksono; Surendro, Kridanto; Herbert

2016-02-01

Data is a vital asset in a business enterprise in achieving organizational goals. Data and information affect the decision-making process on the various activities of an organization. Data problems include validity, quality, duplication, control over data, and the difficulty of data availability. Data Governance is the way the company / institution manages its data assets. Data Governance covers the rules, policies, procedures, roles and responsibilities, and performance indicators that direct the overall management of data assets. Studies on governance data or information aplenty recommend the importance of cultural factors in the governance of research data. Among the organization's leadership culture has a very close relationship, and there are two concepts turn, namely: Culture created by leaders, leaders created by culture. Based on the above, this study exposure to the theme "Leadership and Culture Of Data Governance For The Achievement Of Higher Education Goals (Case Study: Indonesia University Of Education)". Culture and Leadership Model Development of on Higher Education in Indonesia would be made by comparing several models of data governance, organizational culture, and organizational leadership on previous studies based on the advantages and disadvantages of each model to the existing organizational business. Results of data governance model development is shown in the organizational culture FPMIPA Indonesia University Of Education today is the cultural market and desired culture is a culture of clan. Organizational leadership today is Individualism Index (IDV) (83.72%), and situational leadership on selling position.

EU energy policies achievement by industries in decentralized areas

Directory of Open Access Journals (Sweden)

Destro Nicola

2017-01-01

Full Text Available Energy Roadmap outlined by the European Commission sets out several routes for a more sustainable, competitive and secure energy system in 2050. All the outlined scenarios consider energy efficiency, renewable energy, nuclear energy and carbon capture and storage. In this paper, more attention has been devoted to the energy efficiency issue, by the identification of new micro and small networks opportunity fed by hybrid plants in the North-East of Italy. National energy balance and national transmission system operator data allowed to collect industrial energy consumptions data on the investigated area. Applying industrial statistics to the local energy needs allows to collect a dataset including consumption information by factory and by company structure (size and employees for each industrial sector highlighting the factory density in the area. Preliminary outcomes from the model address to the exploitation of local by-product for energy purposes.

A vapor feed methanol microfluidic fuel cell with high fuel and energy efficiency

International Nuclear Information System (INIS)

Wang, Yifei; Leung, Dennis Y.C.; Xuan, Jin; Wang, Huizhi

2015-01-01

Highlights: • A microfluidic fuel cell with a vapor feed anode is investigated. • Its advantages include simpler design, direct usage of methanol and better performance. • The prototype achieves a peak power density of 55.4 mW cm −2 under room temperature. • The energy efficiency of 9.4% is much higher than its liquid feed counterpart. - Abstract: In this paper, a prototype of methanol microfluidic fuel cell with vapor feed anode configuration is proposed to improve the fuel and energy efficiency of the conventional liquid feed methanol microfluidic fuel cells. Peak power density of 55.4 mW cm −2 can be achieved with this prototype under room temperature, which is 30% higher than its conventional liquid feed counterpart. Moreover, an energy efficiency of 9.4% is achieved, which is 27.5 times higher than its liquid feed counterpart. This superiority on both cell performance and energy efficiency is directly benefitted from its vapor feed anode configuration, which alleviates the fuel crossover, eliminates the fuel depletion boundary layer, and avoids the bulk anolyte wastage. The tradeoff between cell performance and fuel utilization for conventional liquid feed microfluidic fuel cells is also evaded

Synergies in the Asian energy system: Climate change, energy security, energy access and air pollution

International Nuclear Information System (INIS)

Vliet, Oscar van; Krey, Volker; McCollum, David; Pachauri, Shonali; Nagai, Yu; Rao, Shilpa; Riahi, Keywan

2012-01-01

We use the MESSAGE model to examine multiple dimensions of sustainable development for three Asian regions in a set of scenarios developed for the Asian Modelling Exercise. Using climate change mitigation as a starting point for the analysis, we focus on the interaction of climate and energy with technology choice, energy security, energy access, and air pollution, which often have higher policy priority than climate change. Stringent climate policies drive the future energy supply in Asia from being dominated by coal and oil to a more diversified system based mostly on natural gas, coal with CCS, nuclear and renewable energy. The increase in diversity helps to improve the energy security of individual countries and regions. Combining air pollution control policies and universal energy access policies with climate policy can further help to reduce both outdoor and indoor air pollution related health impacts. Investments into the energy system must double by 2030 to achieve stringent climate goals, but are largely offset by lower costs for O and M and air pollution abatement. Strong focus on end-use efficiency also helps lowering overall total costs and allows for limiting or excluding supply side technologies from the mitigation portfolio. Costs of additional energy access policies and measures are a small fraction of total energy system costs. - Highlights: ► Half of added investments in energy offset by lower costs for O and M and air pollution. ► Costs for achieving universal energy access much smaller than energy system costs. ► Combined emissions and access policies further reduce air pollution impacts on health. ► Strong focus on end-use efficiency allows for more flexibility on energy sources. ► Stringent climate policy can improve energy security of Asian regions.

A STUDY ON SOCIAL ADJUSTMENT AMONG HIGHER SECONDARY SCHOOL STUDENTS AND ITS IMPACT ON THEIR ACADEMIC ACHIEVEMENT IN COIMBATORE DISTRICT

OpenAIRE

P.Priya Packiaselvi; Ms.Malathi.V.A

2017-01-01

Every human being seeks adjustment to various situations. He constantly makes efforts to adjustment himself to his surroundings because a wholesome adjustment is essential for leading a happy life and going satisfaction. Social adjustment to other people is general and to the group with which they are identified is particular. The main motive of the study is to find out the social adjustment among higher secondary school students and its impact on academic achievement in Coimbatore Educationa...

Achievement motivation and memory: achievement goals differentially influence immediate and delayed remember-know recognition memory.

Science.gov (United States)

Murayama, Kou; Elliot, Andrew J

2011-10-01

Little research has been conducted on achievement motivation and memory and, more specifically, on achievement goals and memory. In the present research, the authors conducted two experiments designed to examine the influence of mastery-approach and performance-approach goals on immediate and delayed remember-know recognition memory. The experiments revealed differential effects for achievement goals over time: Performance-approach goals showed higher correct remember responding on an immediate recognition test, whereas mastery-approach goals showed higher correct remember responding on a delayed recognition test. Achievement goals had no influence on overall recognition memory and no consistent influence on know responding across experiments. These findings indicate that it is important to consider quality, not just quantity, in both motivation and memory, when studying relations between these constructs.

Achieving CO2 reductions in Colombia: Effects of carbon taxes and abatement targets

International Nuclear Information System (INIS)

Calderón, Silvia; Alvarez, Andrés Camilo; Loboguerrero, Ana María; Arango, Santiago; Calvin, Katherine; Kober, Tom; Daenzer, Kathryn; Fisher-Vanden, Karen

2016-01-01

2 emissions in Colombia will increase until 2050, with no stabilization achieved during this period. • Significant CO 2 reductions may be achieved through high carbon price and abatement targets. • Climate policy increases wind, biomass or coal with CCS in total primary energy. Some models project higher electricity production. • Mitigation is also based on lower final energy consumed by end-use sectors, due to efficiency increases or energy savings.

What Happens to the Fish's Achievement in a Little Pond? A Simultaneous Analysis of Class-Average Achievement Effects on Achievement and Academic Self-Concept

Science.gov (United States)

Stäbler, Franziska; Dumont, Hanna; Becker, Michael; Baumert, Jürgen

2017-01-01

Empirical studies have demonstrated that students who are taught in a group of students with higher average achievement benefit in terms of their achievement. However, there is also evidence showing that being surrounded by high-achieving students has a negative effect on students' academic self-concept, also known as the big-fish--little-pond…

Music Achievement and Academic Achievement: Isolating the School as a Unit of Study

Science.gov (United States)

Frey-Clark, Marta

2015-01-01

Music participation and academic achievement have long been of interest to educators, researchers and policy makers. The literature is replete with studies linking music participation to higher state assessment scores, grade point averages, and Standardized Achievement Test (SAT) scores. If students from quality music programs academically…

Load leveling air conditioning technology development by unused energy high-level utilization. Summary of lectures given at the achievement report meeting; Miriyo energy kodo katsuyo fuka heijunka reidanbo gijutsu kaihatsu. Seika hokokukai koen yoshishu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-01-01

This paper summarizes lectures given at the research and development achievement report meeting on load leveling air conditioning technologies utilizing unutilized energies at high levels. The lecture titled 'the current status and future problems in heat supply industries' given by the manager of the Heat Supply Industry Department at the Agency of Natural Resources and Energy explained the heat supply businesses in relation with global environment issues, electric power load leveling, and cogeneration. The lecture titled 'improvement of cities to energy saving type cities and district air conditioning systems' given by a construction official at the Ministry of Construction explained the guideline (draft) for introduction of district air conditioning systems as to their purpose, positioning, procedure for discussing the introduction, and procedure for its implementation as a business. The lecture titled 'the recent trend inside and outside the country around unutilized energies' given by Professor Tanazawa at the Tokyo University of Agriculture and Technology described the intensification of energy problems, environment problems, and the near future measures to be taken against these problems. The lecture titled 'summarization of the achievements in development of load leveling air conditioning technologies utilizing unutilized energies at high levels' given by Professor Nakahara at the Kanagawa University explained the summary of the achievements in research and development by themes. (NEDO)

Supported black phosphorus nanosheets as hydrogen-evolving photocatalyst achieving 5.4% energy conversion efficiency at 353 K.

Science.gov (United States)

Tian, Bin; Tian, Bining; Smith, Bethany; Scott, M C; Hua, Ruinian; Lei, Qin; Tian, Yue

2018-04-11

Solar-driven water splitting using powdered catalysts is considered as the most economical means for hydrogen generation. However, four-electron-driven oxidation half-reaction showing slow kinetics, accompanying with insufficient light absorption and rapid carrier combination in photocatalysts leads to low solar-to-hydrogen energy conversion efficiency. Here, we report amorphous cobalt phosphide (Co-P)-supported black phosphorus nanosheets employed as photocatalysts can simultaneously address these issues. The nanosheets exhibit robust hydrogen evolution from pure water (pH = 6.8) without bias and hole scavengers, achieving an apparent quantum efficiency of 42.55% at 430 nm and energy conversion efficiency of over 5.4% at 353 K. This photocatalytic activity is attributed to extremely efficient utilization of solar energy (~75% of solar energy) by black phosphorus nanosheets and high-carrier separation efficiency by amorphous Co-P. The hybrid material design realizes efficient solar-to-chemical energy conversion in suspension, demonstrating the potential of black phosphorus-based materials as catalysts for solar hydrogen production.

Growth of pipelines : the critical enabler in achieving our energy potential

International Nuclear Information System (INIS)

MacInnis, D.

2005-01-01

Issues concerning pipeline infrastructure and development in relation to the Canadian Energy Pipeline Association (CEPA) were discussed. Ninety-five per cent of the crude oil and natural gas produced in Canada is transported by members of CEPA, which represents 2.4 mm bbl/d of oil and 16.2 Bcf/d of gas. Assets of CEPA's members are worth over CDN$20 billion, with a projected capital investment of CDN$20 billion over the next 20 years. Growth in consumer demand and issues concerning security of North American gas supply to 2025 were discussed. It was anticipated that while new sources of gas will be more costly, new supply will contribute to more moderate prices. New infrastructure needs will build on existing systems. However, timely investment will be critical to connect to supply markets. North American natural gas transmission and distribution networks will require investments of approximately $US301 billion. Ineffective regulatory processes, labour shortages and the search for competitively priced capital will result in higher energy costs to consumers. Issues concerning pipeline construction projects in Alaska and northern Canada were reviewed. The projected economic benefits of pipeline construction were examined, including details of employment created through pipeline investment. The costs to Canadian consumers of delaying pipeline construction were also outlined. It was concluded that efficient and effective policies and regulations are needed to secure energy supply in a timely manner. In addition, a competitive investment environment is needed, in which safety and sustainability are balanced by economic viability and productive trade relationships. tabs., figs

Energy - achieving an optimum through information

International Nuclear Information System (INIS)

Gitt, W.

1986-01-01

What have computer programs in common with everyday human behaviour. Or the birds' passage, or photosynthesis, or the chemical reactions in a cell. They all primarily are information-controlled processes. The book under review deals with 'information' and 'energy', two main concepts in today's technological world. 'Energy' during the last few years has become a significant criterion with regard to technological progress. 'Information' is not only a main term in informatics terminology, but also a central concept for example in biology, linguistics, and communication science. The author shows that every 'information' is the result of an intellectual and purposeful process. The concept of information is taken as the red thread leading the author's journey through manifold strata of modern life, asking questions, finding answers, discussing problems. The wide spectrum of aspects discussed, including for instance a new approach to the Bible, and the remarkable examples presented by the author, make this book a treasure of knowledge, and of faith. (orig./HP) [de

Higher order corrections to energy levels of muonic atoms

International Nuclear Information System (INIS)

Rinker, G.A. Jr.; Steffen, R.M.

1975-08-01

In order to facilitate the analysis of muonic x-ray spectra, the results of numerical computations of all higher order quantum electrodynamical corrections to the energy levels of muonic atoms are presented in tabular and graphical form. These corrections include the vacuum polarization corrections caused by emission and reabsorption of virtual electron pairs to all orders, including ''double-bubble'' and ''cracked-egg'' diagrams. An estimate of the Delbruecke scattering-type correction is presented. The Lamb-shift (second- and fourth-order vertex) corrections have been calculated including the correction for the anomalous magnetic moment of the muon. The relativistic nuclear motion (or recoil) correction as well as the correction caused by the screening of the atomic electrons is presented in graphs. For the sake of completeness a graph of the nuclear polarization as computed on the basis of Chen's approach has been included. All calculations were made with a two-parameter Fermi distribution of the nuclear charge density. 7 figures, 23 references

Are major economies on track to achieve their pledges for 2020? An assessment of domestic climate and energy policies

International Nuclear Information System (INIS)

Roelfsema, Mark; Elzen, Michel den; Höhne, Niklas; Hof, Andries F.; Braun, Nadine; Fekete, Hanna; Böttcher, Hannes; Brandsma, Ruut; Larkin, Julia

2014-01-01

Many of the major greenhouse gas emitting countries have planned and/or implemented domestic mitigation policies, such as carbon taxes, feed-in tariffs, or standards. This study analyses whether the most effective national climate and energy policies are sufficient to stay on track for meeting the emission reduction proposals (pledges) that countries made for 2020. The analysis shows that domestic policies of India, China and Russia are projected to lead to lower emission levels than the pledged levels. Australia's and the EU's nationally legally binding policy framework is likely to deliver their unconditional pledges, but not the conditional ones. The situation is rather unclear for Japan, South Korea, Brazil and Indonesia. We project that policies of Canada and the USA will reduce 2020 emission levels, but additional policies are probably needed to deliver their pledges in full. The analysis also shows that countries are implementing policies or targets in various areas to a varying degree: all major countries have set renewable energy targets; many have recently implemented efficiency standards for cars, and new emission trading systems are emerging. - Highlights: • Many countries have pledged to reduce their greenhouse gas emissions by 2020. • There are upward revisions of greenhouse gas emission projections in many developing countries. • Higher emissions expected from pledged mitigation action plans of developing countries. • Achieving the 2 °C climate goal becomes more difficult. • The expected emission levels resulting from the pledges are surrounded with large uncertainties

Energy efficiency enhancements for semiconductors, communications, sensors and software achieved in cool silicon cluster project

Science.gov (United States)

Ellinger, Frank; Mikolajick, Thomas; Fettweis, Gerhard; Hentschel, Dieter; Kolodinski, Sabine; Warnecke, Helmut; Reppe, Thomas; Tzschoppe, Christoph; Dohl, Jan; Carta, Corrado; Fritsche, David; Tretter, Gregor; Wiatr, Maciej; Detlef Kronholz, Stefan; Mikalo, Ricardo Pablo; Heinrich, Harald; Paulo, Robert; Wolf, Robert; Hübner, Johannes; Waltsgott, Johannes; Meißner, Klaus; Richter, Robert; Michler, Oliver; Bausinger, Markus; Mehlich, Heiko; Hahmann, Martin; Möller, Henning; Wiemer, Maik; Holland, Hans-Jürgen; Gärtner, Roberto; Schubert, Stefan; Richter, Alexander; Strobel, Axel; Fehske, Albrecht; Cech, Sebastian; Aßmann, Uwe; Pawlak, Andreas; Schröter, Michael; Finger, Wolfgang; Schumann, Stefan; Höppner, Sebastian; Walter, Dennis; Eisenreich, Holger; Schüffny, René

2013-07-01

An overview about the German cluster project Cool Silicon aiming at increasing the energy efficiency for semiconductors, communications, sensors and software is presented. Examples for achievements are: 1000 times reduced gate leakage in transistors using high-fc (HKMG) materials compared to conventional poly-gate (SiON) devices at the same technology node; 700 V transistors integrated in standard 0.35 μm CMOS; solar cell efficiencies above 19% at cars Contribution to the Topical Issue “International Semiconductor Conference Dresden-Grenoble - ISCDG 2012”, Edited by Gérard Ghibaudo, Francis Balestra and Simon Deleonibus.

Achieving energy efficiency through product policy: the UK experience

International Nuclear Information System (INIS)

Boardman, Brenda

2004-01-01

The focus of this paper is on energy efficiency of domestic equipment. It is contended that, in the UK and--by extension--elsewhere. Government has to take the lead in defining low-energy standards for products. In the absence of policy, manufacturers do not recognize the need for carbon reductions in the equipment they design and consumers are unaware of the variation in energy performance in the product range. At present, neither market pull nor technology push can be relied upon to deliver energy savings. The imposition of a weak minimum standard on domestic fridges and freezers in 1999 will, over the lifetime of the appliances already sold by December 2002, save 1 Mt C of carbon dioxide at nil cost to government or to the manufacturers, and a net benefit to consumers of pound 855 m: a highly cost-effective policy. The difference between energy efficiency and energy conservation is that it takes time for the cumulative benefits of an energy efficiency improvement to result in the maximum effect on energy demand reduction: the benefits of the 1999 energy efficiency standard will accumulate until at least 2020. This period is equivalent to the cycle of stock replacement for that particular object. The final level of energy conservation depends upon the offsetting effects of growth in ownership levels and the size of new equipment purchases

Minimum beam-energy spread of a high-current rf linac

International Nuclear Information System (INIS)

Chan, K.C.D.; Fraser, J.S.

1987-01-01

Energy spread is an important parameter of an electron linac and, usually, is determined by the time dependence of the external rf accelerating field. By using a combination of fundamental and higher harmonic frequencies, the accelerating field can be maintained approximately constant over a beam bunch with the resultant energy spread approximately zero. This technique is no longer adequate when the longitudinal wake field of the beam bunch is taken into account. The wake-field variation along the bunch length introduces an energy spread that cannot be exactly compensated for with the use of fundamental and higher harmonic frequencies. The achievable minimum energy spread including the wake-field effect is therefore limited. In this paper, we report the minimum energy spreads achievable using the fundamental and third-harmonic frequencies, calculated using a least-squares algorithm, for some typical structures in use at Los Alamos National Laboratory. The dependence of these results on bunch shape, bunch charge, and structure frequency is discussed. Also included are discussions of schemes for implementing the third-harmonic frequency and their effectiveness

Industrial energy efficiency: Achieving success in a difficult environment

Energy Technology Data Exchange (ETDEWEB)

Castellow, Carl

2010-09-15

Energy use and the resulting environmental impacts are major points of concern for the world in the 21st century. Opinions that define the challenges of sustainable energy options are as diverse as the proposed solutions. The industrial sector is a key area both from the standpoint of the amount of energy consumed and the magnitude of the energy options that exist there. However, history has shown that success in the industrial energy sector requires careful planning and consideration of the unique challenges of the manufacturing environment.

Batch pervaporative fermentation with coupled membrane and its influence on energy consumption in permeate recovery and distillation stage

International Nuclear Information System (INIS)

Leon, Juan A.; Palacios-Bereche, Reynaldo; Nebra, Silvia A.

2016-01-01

In the ethanol production process from sugarcane molasses, the distillation process is a high-energy demand stage. The distillation energy efficiency is strongly associated with the alcoholic fermentation performance in the process. The final ethanol concentration in the alcoholic wines has a direct impact on consumption of thermal energy in ethanol separation. In this paper, ethanol production with a H-SBMF (Hybrid-Simple Batch Membrane Fermenter) using PDMS (polydimethylsiloxane) pervaporation membrane was modelled and simulated, in order to determine its influence on energy consumption in distillation. Steam in distillation and electrical energy needs in permeate recovery were mainly influenced by membrane adaptation. The H-SBMF achieved a higher ethanol production in the range of 10–13% compared to the conventional batch fermenter, and an increase in productivity of 150%. The distillation system consisted of two sets of columns: the ethanol recovery column and the rectification column. The permeate recovery system (i.e. vacuum and compression) was regarded in order to evaluate the electrical energy requirement, and the thermal energy demand was evaluated. A decrease in steam consumption was evidenced by the adaptation of the membrane to the fermenter. Higher energy efficiencies were achieved in distillation with larger membrane areas, achieving almost 17% steam reduction. - Highlights: • Higher and faster ethanol productions were achieved by fermenter hybridization. • Multi-stage permeate compression and inter-stage heat recovery were assumed. • Energy demand was studied based on an integrated fermentation and distillation scheme. • High-energy efficiency was attained in the distillation to produce hydrated alcohol.

Study on route division for ship energy efficiency optimization based on big environment data

NARCIS (Netherlands)

Wang, K.; Yan, Xinping; Yuan, Yupeng; Jiang, X.; Lodewijks, G.; Negenborn, R.R.; Ma, Weiming

2017-01-01

In the case of the global energy crisis and the higher sound of energy saving and emission reduction, how to take effective management measures of ship energy efficiency to achieve the goal of energy saving and emission reduction, put forward a new challenge for the development of shipping

Fossil energy use and the environment

International Nuclear Information System (INIS)

Sage, P.W.

1994-01-01

Energy demand projections indicate that fossil energy will provide some ninety per cent of global primary energy demand for the foreseeable future. This paper considers the principal environmental impacts associated with fossil energy use and describes approaches to minimise them. Technologies are now available to reduce significantly pollutant emissions from fossil fuel use. Emerging technologies offer higher conversion efficiencies to reduce still further specific emissions per unit of energy output. It is essential, particularly in those areas of rapid growth in energy use, that best practice and technology are deployed. Technology transfer and training will help to achieve this and enable fossil energy use to be fully compatible with increasingly stringent environmental requirements. (author) 4 figs., 12 refs

A coupled piezoelectric–electromagnetic energy harvesting technique for achieving increased power output through damping matching

International Nuclear Information System (INIS)

Challa, Vinod R; Prasad, M G; Fisher, Frank T

2009-01-01

Vibration energy harvesting is being pursued as a means to power wireless sensors and ultra-low power autonomous devices. From a design standpoint, matching the electrical damping induced by the energy harvesting mechanism to the mechanical damping in the system is necessary for maximum efficiency. In this work two independent energy harvesting techniques are coupled to provide higher electrical damping within the system. Here the coupled energy harvesting device consists of a primary piezoelectric energy harvesting device to which an electromagnetic component is added to better match the total electrical damping to the mechanical damping in the system. The first coupled device has a resonance frequency of 21.6 Hz and generates a peak power output of ∼332 µW, compared to 257 and 244 µW obtained from the optimized, stand-alone piezoelectric and electromagnetic energy harvesting devices, respectively, resulting in a 30% increase in power output. A theoretical model has been developed which closely agrees with the experimental results. A second coupled device, which utilizes the d 33 piezoelectric mode, shows a 65% increase in power output in comparison to the corresponding stand-alone, single harvesting mode devices. This work illustrates the design considerations and limitations that one must consider to enhance device performance through the coupling of multiple harvesting mechanisms within a single energy harvesting device

Reductions in energy use and environmental emissions achievable with utility-based cogeneration: Simplified illustrations for Ontario

International Nuclear Information System (INIS)

Rosen, M.A.

1998-01-01

Significant reductions in energy use and environmental emissions are demonstrated to be achievable when electrical utilities use cogeneration. Simplified illustrations of these reductions are presented for the province of Ontario, based on applying cogeneration to the facilities of the main provincial electrical utility. Three cogeneration illustrations are considered: (i) fuel cogeneration is substituted for fuel electrical generation and fuel heating, (ii) nuclear cogeneration is substituted for nuclear electrical generation and fuel heating, and (iii) fuel cogeneration is substituted for fuel electrical generation and electrical heating. The substitution of cogeneration for separate electrical and heat generation processes for all illustrations considered leads to significant reductions in fuel energy consumption (24-61%), which lead to approximately proportional reductions in emissions. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

Achieving a Net Zero Energy Retrofit - In a humid, temperate climate: Lessons from the University of Hawai'i at Manoa

Energy Technology Data Exchange (ETDEWEB)

Regnier, Cindy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Robinson, Alastair [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2013-06-01

The University of Hawaii at Manoa (UHM) partnered with the US Department of Energy (DOE) to develop and implement solutions to retrofit exiting buildings to reduce energy consumption by at least 30% as part of DOE’s Commercial Building Partnerships (CBP) Program.1 Kuykendall Hall, located on the UHM campus in Honolulu, was the focus of a CBP analysis and design collaboration among the University of Hawai’i, their consultants, and Lawrence Berkeley National Laboratory (LBNL). Kuykendall Hall consists of two 1960s-era wings – a four-story wing containing classrooms, and a seven-story tower containing offices – with a total floor area of approximately 76,000 square feet (ft2). The retrofit design, which uses local prevailing winds to aid ventilation and cooling and incorporates envelope and lighting elements that reduce the need for cooling, was initially on track to use about 50% less energy than the current building, exceeding the CBP’s 30% savings goal. With the addition of building-mounted solar electric panels, the retrofitted building is projected to achieve net-zero annual energy use. Achieving net-zero energy addressed an emerging challenge to the university – how to lower energy usage and reduce dependence on imported fossil fuel in the face of already-high energy prices that are forecast to double by 2040. Not only will the retrofit dramatically reduce Kuykendall Hall’s annual energy costs, but the project lays the groundwork for new campus policies and processes and low-energy design approaches and is building a campus knowledge base on low-energy practices. This project is a model of integrated design and building delivery that will be replicated in future projects on the campus.

High energy physics in the United States

International Nuclear Information System (INIS)

Month, M.

1985-01-01

The US program in high energy physics from 1985 to 1995 is reviewed. The program depends primarily upon work at the national accelerator centers, but includes a modest but diversified nonaccelerator program. Involvement of universities is described. International cooperation in high energy physics is discussed, including the European, Japanese, USSR, and the People's Republic of China's programs. Finally, new facilities needed by the US high energy physics program are discussed, with particular emphasis given to a Superconducting Super Collider for achieving ever higher energies in the 20 TeV range

High energy physics in the United States

Energy Technology Data Exchange (ETDEWEB)

Month, M.

1985-10-16

The US program in high energy physics from 1985 to 1995 is reviewed. The program depends primarily upon work at the national accelerator centers, but includes a modest but diversified nonaccelerator program. Involvement of universities is described. International cooperation in high energy physics is discussed, including the European, Japanese, USSR, and the People's Republic of China's programs. Finally, new facilities needed by the US high energy physics program are discussed, with particular emphasis given to a Superconducting Super Collider for achieving ever higher energies in the 20 TeV range. (LEW)

Risoe energy report 8. The intelligent energy system infrastructure for the future

Energy Technology Data Exchange (ETDEWEB)

Larsen, Hans; Soenderberg Petersen, L. (eds.)

2009-09-15

This report is volume 8 in a series started in 2002, and will take its point of reference in the need for the development of a highly flexible and intelligent energy system infrastructure which facilitates substantial higher amounts of renewable energy than today's energy systems. This intelligent and flexible infrastructure is a prerequisite in achieving the goals set up by IPCC in 2007 on CO{sub 2} reductions as well as ensuring the future security of energy supply in all regions of the world. The report presents a generic approach for future infrastructure issues on local, regional and global scale with focus on the energy system. The report is based on chapters and updates from Risoe Energy Report 1 - 7, as well as input from contributors to the DTU Climate Change Technology workshops and available international literature and reports. (author)

Towards grid parity in insular energy systems: The case of photovoltaics (PV) in Cyprus

International Nuclear Information System (INIS)

Fokaides, Paris A.; Kylili, Angeliki

2014-01-01

Grid parity is defined as the threshold at which a grid-connected renewable energy sources (RES) system supplies electricity to the end user at the same price as grid-supplied electricity. Predictions from the 2006 time-frame expected retail grid parity for solar in the 2016 to 2020 era, but due to rapid downward pricing changes, more recent calculations have forced dramatic reductions in time scale, and the suggestion that solar has already reached grid parity in a wide variety of locations. This study presents aspects of achieving grid parity in insular energy systems, based on a case study applied in Cyprus. The analysis presents the variation of the manufacturing cost, the selling price of the produced energy, and the performance of the solar panels to examine the conditions of accomplishing grid parity event. It is also concluded that grid parity may be easier achieved in insular energy systems due to the higher cost of primary energy. - Highlights: • This study presents aspects of achieving grid parity in insular energy systems, based on a case study applied in Cyprus. • The impact of the manufacturing cost and the feed in tariff on accomplishing grid parity event is analysed. • A sensitivity analysis is conducted to define the parameters that strongly affect the goal of grid parity. • It is concluded that grid parity may be easier achieved in insular energy systems due to the higher cost of primary energy

Leadership - a key to success in achieving higher competitiveness at companies

OpenAIRE

Hudakova, Ivana

2008-01-01

The idea of leadership has fascinated people for centuries. Leadership, or leading, is an asocial process, where the leader is seeking for voluntary participation of the subordinated, thus striving to achieve the company's objectives. Leadership clearly proves to be more than exercising power and authority. It also covers a number of managerial abilities, such as susceptibility, motivation, scrupulousness, empathy and communication. Leadership has to be present at all levels of the organizati...

Energy access in Africa: Challenges ahead

International Nuclear Information System (INIS)

Brew-Hammond, Abeeku

2010-01-01

This paper presents a review of the current situation and projections for energy access in Africa. The paper also presents several sets of ambitious energy access targets as agreed by the regional groupings within the region. The paper argues that achieving between 50% and 100% access to modern energy services by 2030 in Africa will require more effective mobilization and use of both domestic and external funding, and the development and implementation of innovative policy frameworks. The paper suggests that greater emphasis will need to be placed on productive uses of energy and energy for income generation in order to break the vicious circle of low incomes leading to poor access to modern energy services, which in turn puts severe limitations on the ability to generate higher incomes. The paper further suggests that if anything near the ambitious targets set by African organisations are to be achieved then it will be advisable to tap into the full menu of energy resource and technology options, and there will be the need for significant increases in the numbers of various actors involved together with more effective institutions in the energy sector.

Ultra-High Energy Cosmic Rays (2/3)

CERN Multimedia

CERN. Geneva

2012-01-01

The origin of the highest energy cosmic rays (UHECR) with energies above 1000 TeV, is still unknown. The discovery of their sources will reveal the engines of the most energetic astrophysical accelerators in the universe. In these lectures we present the recent observational results from HiRes, Telescope Array and Pierre Auger Observatory as well as (some of) the possible astrophysical origins of UHECR. These experiments deal with particle interactions at energies orders of magnitude higher than achieved in terrestrial accelerators.

Ultra-High Energy Cosmic Rays (1/3)

CERN Multimedia

CERN. Geneva

2012-01-01

The origin of the highest energy cosmic rays (UHECR) with energies above 1000 TeV, is still unknown. The discovery of their sources will reveal the engines of the most energetic astrophysical accelerators in the universe. In these lectures we present the recent observational results from HiRes, Telescope Array and Pierre Auger Observatory as well as (some of) the possible astrophysical origins of UHECR. These experiments deal with particle interactions at energies orders of magnitude higher than achieved in terrestrial accelerators.

Ultra-High Energy Cosmic Rays (3/3)

CERN Multimedia

CERN. Geneva

2012-01-01

The origin of the highest energy cosmic rays (UHECR) with energies above 1000 TeV, is still unknown. The discovery of their sources will reveal the engines of the most energetic astrophysical accelerators in the universe. In these lectures we present the recent observational results from HiRes, Telescope Array and Pierre Auger Observatory as well as (some of) the possible astrophysical origins of UHECR. These experiments deal with particle interactions at energies orders of magnitude higher than achieved in terrestrial accelerators.

Towards Cooling Tower Efficiency-An Energy Audit Approach

Directory of Open Access Journals (Sweden)

Long Su Weng Alwin

2017-01-01

Full Text Available This research studied the power generation trends from national grid and gas for a period of 4 years. Energy audit of critical systems like this is needful for optimal energy utilization. An energy audit was carried outon 6 industrial cooloing towers and their annual operating cost calculated. Variable speed drive suggested was installed and corresponding annual energy savings of 114,900 kWh/year cost saving of RM30,000 was achieved at a case study plant located in Malaysia. Cooling towers with smart systems was recommended for higher energy savings.

Energy-efficient building - Deficits in higher education

International Nuclear Information System (INIS)

Lang, T.; Messmer, R.; Kunz, M.

2005-01-01

This report for the Swiss Federal Office of Energy (SFOE) presents the results of a project that examined the courses of study offered by Swiss Universities of Applied Science and the Federal Institutes of Technology that are concerned with the use of energy in the building area. The results of the survey are presented and commented on. The authors are of the opinion that basic courses of study fulfil their task of knowledge-transfer in the areas concerning energy, ecology, environment and sustainability, although the educational structures used are complex. The importance of interdisciplinary work is stressed. The focus of knowledge-transfer on persons under 40 years of age is criticised as well as deficits in interdisciplinary teamwork. The authors recommend the setting-up of further education programmes for older architects and professionals in the building technical services area

What do physicists expect from higher energies

International Nuclear Information System (INIS)

Hove, L. van

1977-01-01

The author summarises the impact new high energy machines such as the CERN Intersecting Storage Rings and the CERN and American 400 GeV proton synchrotrons have had on physics. The main developments in physics, such as the investigation of strong and weak interactions and the discovery of new particles, are described and their implications discussed. Finally the author discusses future accelerators and the importance of international collaboration in high energy physics. (B.D.)

Energy Mix between Renewable Energy and Nuclear Energy

Directory of Open Access Journals (Sweden)

Yousry E. M. Abushady

2015-08-01

Full Text Available  Energy is the backbone of any development in any State. Renewable Energy (wind, solar and biomass appears currently as a major strategic energy source for a sustainable development particularly for developing or under developing societies. Use of renewable Energy will challenge major technological changes, by achieving energy production and saving. In particular by replacing fossil fuel, a significant cut of environmental impact and green house gas emission (GHG could be achieved. In addition Renewable Energy could offer a sustainable development for different societies particularly those in rural area (e.g. desert or isolated islands. The significant technical renewable energy tool developments in developed States could be much easier to be transferred to or copied in developing States .

Achievements and suggestions of heat metering and energy efficiency retrofit for existing residential buildings in northern heating regions of China

International Nuclear Information System (INIS)

Yan Ding; Zhe Tian; Yong Wu; Neng Zhu

2011-01-01

In order to promote energy efficiency and emission reduction, the importance of improving building energy efficiency received sufficient attention from Chinese Government. The heat metering and energy efficiency retrofit for existing residential buildings of 0.15 billion m 2 in northern heating regions of China was initiated in 2007 and completed successfully at the end of 2010. This article introduced the background and outline of the retrofit project during the period of 11th five-year plan. Numerous achievements that received by retrofit such as environmental protection effect, improvement of indoor environment, improvement of heating system, investment guidance effect, promotion of relevant industries and increasing chances of employment were concluded. Valuable experience that acquired from the retrofit project during the period of 11th five-year plan was also summarized in this article. By analyzing the main problems emerged in the past, pertinent suggestions were put forward to promote a larger scale and more efficient retrofit project in the period of 12th five-year plan. - Highlights: →Successful implementation of a retrofit project in China is introduced. → Significance of the project contributing to emission reduction is analyzed. →Achievements are summarized and future suggestions are put forward.

Parental Involvement and Academic Achievement

Science.gov (United States)

Goodwin, Sarah Christine

2015-01-01

This research study examined the correlation between student achievement and parent's perceptions of their involvement in their child's schooling. Parent participants completed the Parent Involvement Project Parent Questionnaire. Results slightly indicated parents of students with higher level of achievement perceived less demand or invitations…

Nuclear energy for the green development of Korea

International Nuclear Information System (INIS)

Jung, Young-Eek; Kim, Il-Dong; Lee, Sang-Don; Jeong, Young-Gi

2009-01-01

The Korean government announced the 'Basic Plan for National Energy towards 2030' last year. The goal of the plan is to achieve energy security, energy efficiency and environmental protection. To achieve green development Korean government plans to increase the portion of nuclear and renewable energy and reduce that of coal and oil energy. According to the plan, Korea will build another 9 units until 2030 and nuclear energy will represent 59% of electricity demands by 2030 which is about 20% higher than last year. Even though environment surrounding the nuclear industry is changing favorably and the government has a plan to increase nuclear energy for green development and optimal energy mix, we have to meet some challenges in the area of safety, waste disposal, public acceptance, and technology development. In this paper, we introduced the history, current status and future prospect of the nuclear industry in Korea, discussed new roles of nuclear energy, and made suggestions how to meet challenges and brace up for the global nuclear renaissance. (author)

Ultra-High-Energy Cosmic Rays

CERN Document Server

Dova, M.T.

2015-05-22

The origin of the ultra high energy cosmic rays (UHECR) with energies above E > 10 17 eV, is still unknown. The discovery of their sources will reveal the engines of the most energetic astrophysical accelerators in the universe. This is a written version of a series of lectures devoted to UHECR at the 2013 CERN-Latin-American School of High-Energy Physics. We present anintroduction to acceleration mechanisms of charged particles to the highest energies in astrophysical objects, their propagation from the sources to Earth, and the experimental techniques for their detection. We also discuss some of the relevant observational results from Telescope Array and Pierre Auger Observatory. These experiments deal with particle interactions at energies orders of magnitude higher than achieved in terrestrial accelerators.

Energy in Croatia, Annual Energy Report

International Nuclear Information System (INIS)

1997-12-01

The publication creates a condensed review of the state of affairs within our energy system. It includes the latest data for 1996, which were at the same time compared to the situations from the previous four years in order to achieve a more accurate insight into all the related problems. The relation of the gross domestic product (GDP) and the electric energy consumption illustrates the fact that the economic conditions are closely connected to the development of the energy sector. In 1996 the gross domestic product was 4.2% higher than in the year before and the electric energy consumption increased by approximately the same figure. It rose from the consumed 12958.0 GWh in 1995 to 12877.9 GWh in 1996, i.e. 4.2%. The total energy consumption in 1996 increased by entire 10.8%, amounting to 352.56 PJ, this predominantly being a result of growing hydro power and natural gas consumption. The immediate energy consumption grew by 8.3%, from 185.96 PJ in 1995 to 201.35 PJ in 1996. Apart from the data included in the review, there are also other presentations referring to the energy generation and consumption in Croatia. A special chapter comprises an analysis of oil and gas system, i.e. hydrocarbon and coal reserves as well as the capacities required for oil and gas processing and transportation. The attention was directed to positive environmental incentives, as the energy sector is responsible for more than 90% of all polluting substances. Apart from the economic and financial indices, the publication includes the prices for electric energy, natural gas and oil derivations as well as maps showing the route of the gas and JANAF systems and the transmission electric energy network. The review puts forward some positive achievements in the development of our energy sector, which create the basis for continued efforts in order to bring about the desired objectives. This will be realized by defining the legislation system and the institutions ensuring high-quality market

Energy implications of mechanical and mechanical–biological treatment compared to direct waste-to-energy

International Nuclear Information System (INIS)

Cimpan, Ciprian; Wenzel, Henrik

2013-01-01

-based system achieved the highest savings, on the condition of SRF co-combustion. As a sensitivity scenario, alternative utilisation of SRF in cement kilns was modelled. It supported similar or higher net savings for all pre-treatment systems compared to mass combustion WtE, except when WtE CHP was possible in the first two background energy scenarios. Recovery of plastics for recycling before energy recovery increased net energy savings in most scenario variations, over those of full stream combustion. Sensitivity to assumptions regarding virgin plastic substitution was tested and was found to mostly favour plastic recovery

Energy implications of mechanical and mechanical–biological treatment compared to direct waste-to-energy

Energy Technology Data Exchange (ETDEWEB)

Cimpan, Ciprian, E-mail: cic@kbm.sdu.dk; Wenzel, Henrik

2013-07-15

recovery, the biodrying MBS-based system achieved the highest savings, on the condition of SRF co-combustion. As a sensitivity scenario, alternative utilisation of SRF in cement kilns was modelled. It supported similar or higher net savings for all pre-treatment systems compared to mass combustion WtE, except when WtE CHP was possible in the first two background energy scenarios. Recovery of plastics for recycling before energy recovery increased net energy savings in most scenario variations, over those of full stream combustion. Sensitivity to assumptions regarding virgin plastic substitution was tested and was found to mostly favour plastic recovery.

AY 2007-2008 Achieving U.S. Energy Security: Energy Industry Sector Report Seminar 8

National Research Council Canada - National Science Library

2008-01-01

...; the ability to generate and exploit inexpensive energy underpins that strength. Therefore, the United States has a vital interest in ensuring the viability and stability of the global energy system and securing its energy security...

Energy - achieving an optimum through information. Energie - optimal durch Information

Energy Technology Data Exchange (ETDEWEB)

Gitt, W.

1986-01-01

What have computer programs in common with everyday human behaviour. Or the birds' passage, or photosynthesis, or the chemical reactions in a cell. They all primarily are information-controlled processes. The book under review deals with 'information' and 'energy', two main concepts in today's technological world. 'Energy' during the last few years has become a significant criterion with regard to technological progress. 'Information' is not only a main term in informatics terminology, but also a central concept for example in biology, linguistics, and communication science. The author shows that every 'information' is the result of an intellectual and purposeful process. The concept of information is taken as the red thread leading the author's journey through manifold strata of modern life, asking questions, finding answers, discussing problems. The wide spectrum of aspects discussed, including for instance a new approach to the Bible, and the remarkable examples presented by the author, make this book a treasure of knowledge, and of faith.

Color transparency experiments at higher energies

Energy Technology Data Exchange (ETDEWEB)

Filippone, B.W. [Caifornia Inst. of Technology, Pasadena, CA (United States)

1994-04-01

The phenomena of Color Transparency has recently attracted a significant amount of theoretical (and experimental) interest. With an increase in the CEBAF beam energy to 8 - 10 GeV, important new data on the process could become available. The present status of the experiments and future prospects at CEBAF are discussed.

Under-Use of Body Energy and Over-Use of External Energy

DEFF Research Database (Denmark)

Nørgaard, Jørgen

2005-01-01

The world’s affluent countries, such as the EU, are facing two severe problems with long-term consequences. One problem is the epidemic-like increase in adverse health effects, which are related to the increasing wealth, primarily appearing as obesity and its associated diseases. This is caused...... of magnitude higher, which can be expressed by the scores of “energy slaves” each citizen utilizes. An extra health driven physical effort by humans seems to have negligible direct impact on energy consumption. The paper will, however, indicate examples of significant indirect savings of external energy......, achieved by healthy extra human efforts. Also, the paper will suggest ways to integrate energy saving policies with health policies for organizing and designing cities and houses to be “healthy inconvenient”, encouraging or pushing people to use their body in their daily doings. This is an enormous...

Higher Energy Intake Variability as Predisposition to Obesity: Novel Approach Using Interquartile Range.

Science.gov (United States)

Forejt, Martin; Brázdová, Zuzana Derflerová; Novák, Jan; Zlámal, Filip; Forbelská, Marie; Bienert, Petr; Mořkovská, Petra; Zavřelová, Miroslava; Pohořalá, Aneta; Jurášková, Miluše; Salah, Nabil; Bienertová-Vašků, Julie

2017-12-01

It is known that total energy intake and its distribution during the day influences human anthropometric characteristics. However, possible association between variability in total energy intake and obesity has thus far remained unexamined. This study was designed to establish the influence of energy intake variability of each daily meal on the anthropometric characteristics of obesity. A total of 521 individuals of Czech Caucasian origin aged 16–73 years (390 women and 131 men) were included in the study, 7-day food records were completed by all study subjects and selected anthropometric characteristics were measured. The interquartile range (IQR) of energy intake was assessed individually for each meal of the day (as a marker of energy intake variability) and subsequently correlated with body mass index (BMI), body fat percentage (%BF), waist-hip ratio (WHR), and waist circumference (cW). Four distinct models were created using multiple logistic regression analysis and backward stepwise logistic regression. The most precise results, based on the area under the curve (AUC), were observed in case of the %BF model (AUC=0.895) and cW model (AUC=0.839). According to the %BF model, age (p<0.001) and IQR-lunch (p<0.05) seem to play an important prediction role for obesity. Likewise, according to the cW model, age (p<0.001), IQR-breakfast (p<0.05) and IQR-dinner (p <0.05) predispose patients to the development of obesity. The results of our study show that higher variability in the energy intake of key daily meals may increase the likelihood of obesity development. Based on the obtained results, it is necessary to emphasize the regularity in meals intake for maintaining proper body composition. Copyright© by the National Institute of Public Health, Prague 2017

Dual energy cardiac CT.

Science.gov (United States)

Carrascosa, Patricia; Deviggiano, Alejandro; Rodriguez-Granillo, Gastón

2017-06-01

Conventional single energy CT suffers from technical limitations related to the polychromatic nature of X-rays. Dual energy cardiac CT (DECT) shows promise to attenuate and even overcome some of these limitations, and might broaden the scope of patients eligible for cardiac CT towards the inclusion of higher risk patients. This might be achieved as a result of both safety (contrast reduction) and physiopathological (myocardial perfusion and characterization) issues. In this article, we will review the main clinical cardiac applications of DECT, that can be summarized in two core aspects: coronary artery evaluation, and myocardial evaluation.

Diversity in OECD energy consumption: Achievements and long-term goals

International Nuclear Information System (INIS)

Heal, D.W.

1990-01-01

Energy consumption in the industrialized world has resumed a rising trend but has been moderated by increased energy efficiency. The demand for energy is also being spread more evenly over a variety of fuels. This paper provides a measure for diversity and examines the implications for energy prices, while reiterating the long-term goal of lower energy consumption

Energy use efficiency in the Indian manufacturing sector: An interstate analysis

International Nuclear Information System (INIS)

Mukherjee, Kankana

2008-01-01

This paper approaches the measurement of energy efficiency from a production theoretic framework and uses Data Envelopment Analysis to measure energy efficiency in the Indian manufacturing sector. Using data from the Annual Survey of Industries for the years 1998-99 through 2003-04, the study compares the energy efficiency in manufacturing across states, based on several models. The results show considerable variation in energy efficiency across states. Comparing the results across our models, we find that the relative pricing of energy does not provide the appropriate incentives for energy conservation. A second-stage regression analysis reveals that states with a larger share of manufacturing output in energy-intensive industries have lower energy efficiency. Also, higher quality labor force associates with higher energy efficiency. Finally, the power sector reforms have not yet had any significant impact on achieving energy efficiency

Energy Doubler/Saver at Fermilab: a status report

International Nuclear Information System (INIS)

Fowler, W.B.

1977-01-01

Guided, as in the past, by close attention to the developing theoretical and experimental evidence for new phenomena (for example, the discoveries of weak neutral currents, charm, J/psi and the Upsilon) Fermilab has devoted considerable effort to pushing on to higher energies. This seems particularly appropriate since other phenomena is suggested, such as intermediate vector bosons (W + and Z 0 ) etc. The TeV Project at Fermilab pursues both increases in the available energy via doubling the energy of the present accelerator as a fixed target, high intensity proton synchrotron and via colliding beams. These ways are complementary to one another. High energy physics with fixed targets cannot match the energy available in the center of mass system that can be achieved in colliding beams, whereas physics with colliding beams cannot match the intensities or the variety of bombarding particles that can be achieved with fixed targets. Some of the aspects of each technique are given

Attenuation of 10 MeV electron beam energy to achieve low doses does not affect Salmonella spp. inactivation kinetics

International Nuclear Information System (INIS)

Hieke, Anne-Sophie Charlotte; Pillai, Suresh D.

2015-01-01

The effect of attenuating the energy of a 10 MeV electron beam on Salmonella inactivation kinetics was investigated. No statistically significant differences were observed between the D 10 values of either Salmonella 4,[5],12:i:- or a Salmonella cocktail (S. 4,[5],12:i:-, Salmonella Heidelberg, Salmonella Newport, Salmonella Typhimurium, Salmonella) when irradiated with either a non-attenuated 10 MeV eBeam or an attenuated 10 MeV eBeam (~2.9±0.22 MeV). The results show that attenuating the energy of a 10 MeV eBeam to achieve low doses does not affect the inactivation kinetics of Salmonella spp. when compared to direct 10 MeV eBeam irradiation. - Highlights: • 10 MeV eBeam energy was attenuated to 2.9±0.22 MeV using HDPE sheets. • Attenuation of eBeam energy does not affect the inactivation kinetics of Salmonella. • Microbial inactivation is independent of eBeam energy in the range of 3–10 MeV

Higher weight, lower education: a longitudinal association between adolescents' body mass index and their subsequent educational achievement level?

Science.gov (United States)

Larsen, Junilla K; Kleinjan, Marloes; Engels, Rutger C M E; Fisher, Jennifer O; Hermans, Roel C J

2014-12-01

The purpose of this study was to examine the association between adolescents' body mass index (BMI) z-scores and their subsequent level of schooling, extending previous longitudinal research by using objectively measured weight and height data. A longitudinal study with 3 study waves (1-year intervals) involving 1248 Dutch adolescents (49% girls; mean age = 13.7 years) at schools providing different educational levels was used to determine adolescents who moved and did not move to a lower educational level in the first year, or in the second year, and to examine whether this movement could be predicted by BMI z-scores (zBMI), after controlling for a large range of potential confounding factors. A total of 1164 Dutch adolescents continued in the same level of education, whereas 84 adolescents moved to a lower educational level (43 moved in the first and 41 in the second year). A higher zBMI significantly increased the risk of a general transition to a lower educational level, and of a transition in the first year, but not in the second year, after controlling for potential demographic, behavioral, and psychological confounds. Findings suggest that a higher zBMI during adolescence immediately lowers educational achievement level during general secondary education. © 2014, American School Health Association.

Capacitive Neutralization Dialysis for Direct Energy Generation.

Science.gov (United States)

Liu, Yue; Zhang, Yi; Ou-Yang, Wei; Bastos Sales, Bruno; Sun, Zhuo; Liu, Fei; Zhao, Ran

2017-08-15

Capacitive neutralization dialysis energy (CNDE) is proposed as a novel energy-harvesting technique that is able to utilize waste acid and alkaline solutions to produce electrical energy. CNDE is a modification based on neutralization dialysis. It was found that a higher NaCl concentration led to a higher open-circuit potential when the concentrations of acid and alkaline solutions were fixed. Upon closing of the circuit, the membrane potential was used as a driving force to move counter ions into the electrical double layers at the electrode-liquid interface, thereby creating an ionic current. Correspondingly, in the external circuit, electrons flow through an external resistor from one electrode to the other, thereby generating electrical energy directly. The influence of external resistances was studied to achieve greater energy extraction, with the maximum output of 110 mW/m 2 obtained by employing an external resistance of 5 Ω together with the AC-coated electrode.

Optimizing renewable energy, demand response and energy storage to replace conventional fuels in Ontario, Canada

International Nuclear Information System (INIS)

Richardson, David B.; Harvey, L.D. Danny

2015-01-01

Electricity systems with high penetrations of renewable energy require a mix of resources to balance supply with demand, and to maintain safe levels of system reliability. A load balancing methodology is developed to determine the optimal lowest-cost mix of renewable energy resources, demand response, and energy storage to replace conventional fuels in the Province of Ontario, Canada. Three successive cumulative scenarios are considered: the displacement of fossil fuel generation, the planned retirement of an existing nuclear reactor, and the electrification of the passenger vehicle fleet. The results show that each of these scenarios is achievable with energy generation costs that are not out of line with current and projected electricity generation costs. These transitions, especially that which proposes the electrification of the vehicle fleet, require significant investment in new generation, with installed capacities much higher than that of the current system. Transitions to mainly renewable energy systems require changes in our conceptualization of, and approach to, energy system planning. - Highlights: • Model three scenarios to replace conventional fuels with renewables, storage and DR (demand response). • Determine optimal low-cost mix of resources for each scenario. • Scenarios require much higher installed capacities than current system. • Energy transitions require changes in approach to energy system planning.

Research with respect to environmental-friendly energy prospects: experiences with energy system models

International Nuclear Information System (INIS)

Kram, T.

1994-01-01

The costs and the effects of four basic options with respect to the reduction of CO 2 -emissions are evaluated. The dominant strategy for the nuclear option consists in the substitution of fossil fuel by nuclear energy. At a 50 percent reduction of CO 2 emissions, heating by natural gas is replaced electric power and conventional cars will be replaced by cars. In the carbon dioxide fixation option, fossil fuel remains the dominant energy vector. In this option, CO 2 emissions can be reduced by replacing coal by natural gas, and by introducing carbon dioxide fixation technology in power plants. The option renewable energy sources favours the use of off-shore wind energy and biogas, resulting in a reduction of carbon dioxide emissions up to 40 percent. Higher reduction rates can only be achieved by the use of more expensive technologies such as geothermal and solar energy. In the option rational use of energy, the reduction of carbon dioxide emissions is achieved by energy saving and, among others, the use of fuel cells. The results of the modelling can contribute to identify the most effective or cost-efficient options in view of reducing carbon dioxide emissions. It is concluded that energy saving alone can not contribute to considerable carbon dioxide emission reductions. Carbon dioxide fixations is technically feasible and appears to be the cheapest option. The substitution of fossil fuel by nuclear energy is only cost-efficient for traditional markets. The public acceptance of nuclear energy, its risks and the disposal of radioactive waste have also to be taken into account. (A.S.)

Moving to higher ground: Closing the high school science achievement gap

Science.gov (United States)

Mebane, Joyce Graham

The purpose of this study was to examine the perceptions of West High School constituents (students, parents, teachers, administrators, and guidance counselors) about the readiness and interest of African American students at West High School to take Advanced Placement (AP) and International Baccalaureate (IB) science courses as a strategy for closing the achievement gap. This case study utilized individual interviews and questionnaires for data collection. The participants were selected biology students and their parents, teachers, administrators, and guidance counselors at West High School. The results of the study indicated that just over half the students and teachers, most parents, and all guidance counselors thought African American students were prepared to take AP science courses. Only one of the three administrators thought the students were prepared to take AP science courses. Between one-half and two-thirds of the students, parents, teachers, and administrators thought students were interested in taking an AP science course. Only two of the guidance counselors thought there was interest among the African American students in taking AP science courses. The general consensus among the constituents about the readiness and interest of African American students at West High School to take IB science courses was that it is too early in the process to really make definitive statements. West is a prospective IB school and the program is new and not yet in place. Educators at the West High School community must find reasons to expect each student to succeed. Lower expectations often translate into lower academic demands and less rigor in courses. Lower academic demands and less rigor in courses translate into less than adequate performance by students. When teachers and administrators maintain high expectations, they encourage students to aim high rather than slide by with mediocre effort (Lumsden, 1997). As a result of the study, the following suggestions should

Energy implications of mechanical and mechanical-biological treatment compared to direct waste-to-energy.

Science.gov (United States)

Cimpan, Ciprian; Wenzel, Henrik

2013-07-01

Primary energy savings potential is used to compare five residual municipal solid waste treatment systems, including configurations with mechanical (MT) and mechanical-biological (MBT) pre-treatment, which produce waste-derived fuels (RDF and SRF), biogas and/or recover additional materials for recycling, alongside a system based on conventional mass burn waste-to-energy and ash treatment. To examine the magnitude of potential savings we consider two energy efficiency levels (state-of-the-art and best available technology), the inclusion/exclusion of heat recovery (CHP vs. PP) and three different background end-use energy production systems (coal condensing electricity and natural gas heat, Nordic electricity mix and natural gas heat, and coal CHP energy quality allocation). The systems achieved net primary energy savings in a range between 34 and 140 MJprimary/100 MJinput waste, in the different scenario settings. The energy footprint of transportation needs, pre-treatment and reprocessing of recyclable materials was 3-9.5%, 1-18% and 1-8% respectively, relative to total energy savings. Mass combustion WtE achieved the highest savings in scenarios with CHP production, nonetheless, MBT-based systems had similarly high performance if SRF streams were co-combusted with coal. When RDF and SRF was only used in dedicated WtE plants, MBT-based systems totalled lower savings due to inherent system losses and additional energy costs. In scenarios without heat recovery, the biodrying MBS-based system achieved the highest savings, on the condition of SRF co-combustion. As a sensitivity scenario, alternative utilisation of SRF in cement kilns was modelled. It supported similar or higher net savings for all pre-treatment systems compared to mass combustion WtE, except when WtE CHP was possible in the first two background energy scenarios. Recovery of plastics for recycling before energy recovery increased net energy savings in most scenario variations, over those of full

Achievement goals affect metacognitive judgments

Science.gov (United States)

Ikeda, Kenji; Yue, Carole L.; Murayama, Kou; Castel, Alan D.

2017-01-01

The present study examined the effect of achievement goals on metacognitive judgments, such as judgments of learning (JOLs) and metacomprehension judgments, and actual recall performance. We conducted five experiments manipulating the instruction of achievement goals. In each experiment, participants were instructed to adopt mastery-approach goals (i.e., develop their own mental ability through a memory task) or performance-approach goals (i.e., demonstrate their strong memory ability through getting a high score on a memory task). The results of Experiments 1 and 2 showed that JOLs of word pairs in the performance-approach goal condition tended to be higher than those in the mastery-approach goal condition. In contrast, cued recall performance did not differ between the two goal conditions. Experiment 3 also demonstrated that metacomprehension judgments of text passages were higher in the performance-approach goal condition than in the mastery-approach goals condition, whereas test performance did not differ between conditions. These findings suggest that achievement motivation affects metacognitive judgments during learning, even when achievement motivation does not influence actual performance. PMID:28983496

Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Marine Climates; January 2006 - December 2006

Energy Technology Data Exchange (ETDEWEB)

Building America Industrialized Housing Partnership (BAIHP); Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Davis Energy Group (DEG); IBACOS; National Association of Home Builders Research Center (NAHBRC); National Renewable Energy Laboratory (NREL)

2006-12-01

The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost neutral basis.

SHARP: A Spatially Higher-order, Relativistic Particle-in-cell Code

Energy Technology Data Exchange (ETDEWEB)

Shalaby, Mohamad; Broderick, Avery E. [Department of Physics and Astronomy, University of Waterloo, 200 University Avenue West, Waterloo, ON, N2L 3G1 (Canada); Chang, Philip [Department of Physics, University of Wisconsin-Milwaukee, 1900 E. Kenwood Boulevard, Milwaukee, WI 53211 (United States); Pfrommer, Christoph [Leibniz-Institut für Astrophysik Potsdam (AIP), An der Sternwarte 16, D-14482 Potsdam (Germany); Lamberts, Astrid [Theoretical Astrophysics, California Institute of Technology, Pasadena, CA 91125 (United States); Puchwein, Ewald, E-mail: mshalaby@live.ca [Institute of Astronomy and Kavli Institute for Cosmology, University of Cambridge, Madingley Road, Cambridge, CB3 0HA (United Kingdom)

2017-05-20

Numerical heating in particle-in-cell (PIC) codes currently precludes the accurate simulation of cold, relativistic plasma over long periods, severely limiting their applications in astrophysical environments. We present a spatially higher-order accurate relativistic PIC algorithm in one spatial dimension, which conserves charge and momentum exactly. We utilize the smoothness implied by the usage of higher-order interpolation functions to achieve a spatially higher-order accurate algorithm (up to the fifth order). We validate our algorithm against several test problems—thermal stability of stationary plasma, stability of linear plasma waves, and two-stream instability in the relativistic and non-relativistic regimes. Comparing our simulations to exact solutions of the dispersion relations, we demonstrate that SHARP can quantitatively reproduce important kinetic features of the linear regime. Our simulations have a superior ability to control energy non-conservation and avoid numerical heating in comparison to common second-order schemes. We provide a natural definition for convergence of a general PIC algorithm: the complement of physical modes captured by the simulation, i.e., those that lie above the Poisson noise, must grow commensurately with the resolution. This implies that it is necessary to simultaneously increase the number of particles per cell and decrease the cell size. We demonstrate that traditional ways for testing for convergence fail, leading to plateauing of the energy error. This new PIC code enables us to faithfully study the long-term evolution of plasma problems that require absolute control of the energy and momentum conservation.

Promotion Models and Achievements of New-energy Automobiles in Shenzhen

Science.gov (United States)

Cai, Yu; Xiong, Siqin; Bai, Bo; Ma, Xiaoming

2017-08-01

As one of the pilot cities in China for demonstration and promotion of new-energy automobiles, Shenzhen, driven by the “two engines” of the government and the market, has made swift progress in promotion of its new-energy automobiles. This paper analyses Shenzhen’s governmental promotion policy concerning new-energy automobiles, summarizes Shenzhen’s commercial models for promoting new-energy automobiles, and is expected to provide reference for other provinces and cities to promote new-energy automobiles.

Gaussian-2 theory: Use of higher level correlation methods, quadratic configuration interaction geometries, and second-order Moller--Plesset zero-point energies

International Nuclear Information System (INIS)

Curtiss, L.A.; Raghavachari, K.; Pople, J.A.

1995-01-01

The performance of Gaussian-2 theory is investigated when higher level theoretical methods are included for correlation effects, geometries, and zero-point energies. A higher level of correlation treatment is examined using Brueckner doubles [BD(T)] and coupled cluster [CCSD(T)] methods rather than quadratic configuration interaction [QCISD(T)]. The use of geometries optimized at the QCISD level rather than the second-order Moller--Plesset level (MP2) and the use of scaled MP2 zero-point energies rather than scaled Hartree--Fock (HF) zero-point energies have also been examined. The set of 125 energies used for validation of G2 theory [J. Chem. Phys. 94, 7221 (1991)] is used to test out these variations of G2 theory. Inclusion of higher levels of correlation treatment has little effect except in the cases of multiply-bonded systems. In these cases better agreement is obtained in some cases and poorer agreement in others so that there is no improvement in overall performance. The use of QCISD geometries yields significantly better agreement with experiment for several cases including the ionization potentials of CS and O 2 , electron affinity of CN, and dissociation energies of N 2 , O 2 , CN, and SO 2 . This leads to a slightly better agreement with experiment overall. The MP2 zero-point energies gives no overall improvement. These methods may be useful for specific systems

Risø energy report 8

DEFF Research Database (Denmark)

Sønderberg Petersen, Leif

This report is volume 8 in a series started in 2002, and will take its point of reference in the need for the development of a highly flexible and intelligent energy system infrastructure which facilitates substantial higher amounts of renewable energy than today’s energy systems. This intelligent...... and flexible infrastructure is a prerequisite in achieving the goals set up by IPCC in 2007 on CO2 reductions as well as ensuring the future security of energy supply in all regions of the world. The report presents a generic approach for future infrastructure issues on local, regional and global scale...... with focus on the energy system. The report is based on chapters and updates from Risø Energy Report 1 – 7, as well as input from contributors to the DTU Climate Change Technology workshops and available international literature and reports....

Motivation and academic achievement in medical students.

Science.gov (United States)

Yousefy, Alireza; Ghassemi, Gholamreza; Firouznia, Samaneh

2012-01-01

Despite their ascribed intellectual ability and achieved academic pursuits, medical students' academic achievement is influenced by motivation. This study is an endeavor to examine the role of motivation in the academic achievement of medical students. In this cross-sectional correlational study, out of the total 422 medical students, from 4th to final year during the academic year 2007-2008, at School of Medicine, Isfahan University of Medical Sciences, 344 participated in completion of the Inventory of School Motivation (ISM), comprising 43 items and measuring eight aspects of motivation. The gold standard for academic achievement was their average academic marks at pre-clinical and clinical levels. Data were computer analyzed by running a couple of descriptive and analytical tests including Pearson Correlation and Student's t-student. Higher motivation scores in areas of competition, effort, social concern, and task were accompanied by higher average marks at pre-clinical as well as clinical levels. However, the latter ones showed greater motivation for social power as compared to the former group. Task and competition motivation for boys was higher than for girls. In view of our observations, students' academic achievement requires coordination and interaction between different aspects of motivation.

Increased Eating Frequency Is Associated with Lower Obesity Risk, But Higher Energy Intake in Adults: A Meta-Analysis

Directory of Open Access Journals (Sweden)

Yue-Qiao Wang

2016-06-01

Full Text Available Body weight is regulated by energy intake which occurs several times a day in humans. In this meta-analysis, we evaluated whether eating frequency (EF is associated with obesity risk and energy intake in adults without any dietary restriction. Experimental and observational studies published before July 2015 were selected through English-language literature searches in several databases. These studies reported the association between EF and obesity risk (odd ratios, ORs in adults who were not in dietary restriction. R software was used to perform statistical analyses. Ten cross-sectional studies, consisting of 65,742 participants, were included in this analysis. ORs were considered as effect size for the analysis about the effect of EF on obesity risk. Results showed that the increase of EF was associated with 0.83 time lower odds of obesity (i.e., OR = 0.83, 95% confidence intervals (CI 0.70–0.99, p = 0.040. Analysis about the effect of EF on differences in participants’ energy intake revealed that increased EF was associated with higher energy intake (β = 125.36, 95% CI 21.76–228.97, p = 0.017. We conclude that increased EF may lead to lower obesity risk but higher energy intake. Clinical trials are warranted to confirm these results and to assess the clinical practice applicability.

Positive energy theorem in generalized Kaluza-Klein theories of higher dimensions

International Nuclear Information System (INIS)

Moreschi, O.M.

1983-01-01

The technique of using spinors in the proof of positive energy theorems in 4 dimensions is extended to the case of Kaluza-Klein theories in spaces of 4 + n dimensions. First a useful presentation of generalized Kaluza-Klein theories is introduced, in which just from the observation of conformal symmetries it is possible to detect a nice splitting of the Ricci tensor into a 4-dimensional Ricci part and a Yang-Mills part, among others. Consideration of linear dependence among the symmetries is not excluded in this treatment. Relevant to the introduction of spinors, a discussion of Clifford Algebras is presented. In particular a real representation of these algebras is introduced for spaces of higher dimensions and its structure is analyzed. The Lie derivative of spinors is presented probably more clearly than in former treatments. After the introduction of these preliminary themes, a brief review of the relevant aspects of positive energy theorems in 4 dimensions is presented, followed by the extension of these ideas to the case of 5 dimensions. Here an earlier result involving gravitational mass and electromagnetic charges is improved. Finally the results are generalized to spaces of 4 + n dimensions, and a more complicated condition to be satisfied by the usual matter tensor is discovered. This procedure leads to a natural definition of invariant Yang-Mills charges, which is compared with former studies

Energy use in Denmark: An international perspective

Energy Technology Data Exchange (ETDEWEB)

Schipper, L.; Howarth, R.; Andersson, B.; Price, L.

1992-08-01

This report analyzes the evolution use in Denmark since the early 1970s in order to shed light on the future path of energy use in Denmark, with particular emphasis on the role of energy efficiency. The authors found that improvements in end-use energy efficiency reduced primary energy requirements in Denmark by 22% between 1972 and 1988. Focusing on developments in six individual sectors of the Danish economy (residential, manufacturing, other industry, service, travel, and freight), they found that the residential, manufacturing, and service sectors have led the improvements in efficiency. Travel showed few significant improvements and the efficiency of freight transportation worsened. The international comparisons showed that the structure of energy use in Denmark is less energy-intensive than that of most high-income OECD countries, with the exception of Japan. Overall, they concluded that most of the energy savings achieved in Denmark were brought about through improvements in technology. They also found that an important stimulus for improved efficiency was higher energy prices, led in no small part by significant taxes imposed on small consumers of heating oil, electricity, and motor fuels. Energy-efficiency programs accelerated energy savings in homes and commercial buildings. The rate of improvement of energy efficiency in Denmark has slowed down significantly since 1984, consistent with trends observed in other major countries. While many of the energy-efficiency goals stated or implied in Denmark`s Energi 2000 are achievable over a very long period, present trends do not point towards achievement of these goals by 2010 or even 2020. Strong measures will have to be developed by both public and private authorities if energy efficiency is to make a key contributions to reducing environmental problems associated with energy use in Denmark.

Photovoltaic wire derived from a graphene composite fiber achieving an 8.45 % energy conversion efficiency.

Science.gov (United States)

Yang, Zhibin; Sun, Hao; Chen, Tao; Qiu, Longbin; Luo, Yongfeng; Peng, Huisheng

2013-07-15

Wired for light: Novel wire-shaped photovoltaic devices have been developed from graphene/Pt composite fibers. The high flexibility, mechanical strength, and electrical conductivity of graphene composite fibers resulted in a maximum energy conversion efficiency of 8.45 %, which is much higher than that of other wire-shaped photovoltaic devices. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Energy in Croatia, Annual Energy Report

International Nuclear Information System (INIS)

1998-12-01

The Ministry of Economic Affairs continues its task of observing and informing about the Croatian energy system. The review consists of the most recent and classified data on 1997 and the previous four years. Compared to previous year, in 1997 the total primary energy supply decreased by 1,3 percent. At the same time the gross domestic product increased by 6,5 percent, thus the energy intensity dropped, which is a positive trend. The energy intensity, the value showing the total energy consumed per unit of gross domestic product, exceeds the level realised by the Western European countries, but it is at the same time more favourable related to the transition economy countries. On the other hand, 1997 saw a decrease in the primary energy production by 8,9 percent, resulting from the decline in the production of natural gas, oil and coal, and naturally, unfavourable hydrological conditions. Thus, own supply dropped to 57 percent, the lowest recorded in the past five years. In 1997 the losses and operational consumption of energy decreased more than the non-energy consumption increased, but despite the decrease of the total primary energy supply there occurred an increase of final energy demand by total of 4,4 percent, 2,1 of which in general consumption, 5,5 in transport and 7,8 percent in industry. Apart from these data, the review considers all other relevant indicators showing a positive shift but leaving space for further improvements with the aim of achieving higher energy system efficiency

Modelling the existing Irish energy-system to identify future energy costs and the maximum wind penetration feasible

DEFF Research Database (Denmark)

Connolly, D.; Lund, Henrik; Mathiesen, Brian Vad

2010-01-01

energy- system to future energy costs by considering future fuel prices, CO2 prices, and different interest rates. The final investigation identifies the maximum wind penetration feasible on the 2007 Irish energy- system from a technical and economic perspective, as wind is the most promising fluctuating...... for the existing Irish energy-system is approximately 30% from both a technical and economic perspective based on 2020 energy prices. Future studies will use the model developed in this study to show that higher wind penetrations can be achieved if the existing energy-system is modified correctly. Finally...... renewable resource available in Ireland. It is concluded that the reference model simulates the Irish energy-system accurately, the annual fuel costs for Ireland’s energy could increase by approximately 58% from 2007 to 2020 if a business-as-usual scenario is followed, and the optimum wind penetration...

SIMULTANEOUS INTEGRATION OF WATER AND ENERGY: ACHIEVEMENTS AND CHALLENGES

Directory of Open Access Journals (Sweden)

Junior Lorenzo Llanes

2016-01-01

Full Text Available Process Integration (PI is a tool that for over forty years has demonstrated its strength to provide optimal solutions to complex problems. The interaction of exchange systems of energy and water networks is a typical case of such problems. The gradual increase in the consumption of water and energy has determined the development of methodologies that take into account the simultaneous integration of these resources. This paper aims to present a literature review related to the simultaneous integration of water and energy. First, general items related to this research field are presented, emphasizing the approaches to simultaneous integration (Pinch Analysis and Mathematical Programming. Some recent cases of studies, demonstrating the strength of these tools mainly focus to sugar industry, are also presented. Finally some of the challenges to be faced by the simultaneous integration of water and energy for the diversification of the Cuban sugar industry are presented.

Energy requirements and physical activity level of active elderly people in rural areas of Cuba. Highlights and achievements

International Nuclear Information System (INIS)

Hernandez-Trianna, M.

2002-01-01

Physical activity levels (PALs) values of urban elderly of developed countries obtained by the DLW-method are usually higher than the recommendations of the Expert Committee on Energy and Protein. This underestimation should be more evident for the rural elderly

Can propulsion and fuel diversity for the bus fleet achieve the win–win strategy of energy conservation and environmental protection?

International Nuclear Information System (INIS)

Wang, Renjie; Wu, Ye; Ke, Wenwei; Zhang, Shaojun; Zhou, Boya; Hao, Jiming

2015-01-01

Highlights: • We first report WTW energy and environmental impacts of new-energy buses in China. • Both CNGV and BEV eliminate petroleum use but increase the burden of other fossil fuels. • BEV is the best to reduce WTW NO X and VOC emissions but no benefit for PM 2.5 and SO 2 . • CNGV has PM 2.5 emission reductions by 70% greater than DV but no benefit in GHG emissions. • HEV is the only option that can reduce energy use and pollutant emissions at the same time. - Abstract: China is facing serious issues involving energy sufficiency, greenhouse gas (GHG) emissions and air pollution caused partly by the rapid growth of vehicles. In order to relieve those problems, new energy vehicles are introduced into the bus and car market. We adopt life cycle analysis to evaluate the well-to-wheels (WTW) energy consumption, CO 2 emissions and pollutant emissions from the traditional diesel bus and new energy buses, including diesel hybrid electric vehicles (HEVs), compressed natural gas vehicles (CNGVs) and battery electric vehicles (BEVs). This study reports the current situation and projects future scenarios for the BEV bus for several regions in China due to significant regional differences in the power generation mix. Compared to the diesel bus, the HEV bus can reduce petroleum, fossil fuel use and CO 2 emissions by about 20%, and, at the same time, produce stable reduction benefits for all air pollutants. The CNG bus achieves reductions of WTW primary PM 2.5 emissions by 70% over its diesel counterpart and, of course, uses little petroleum; but increases fossil fuel consumption moderately and has no benefit in GHG emissions. The BEV bus can deliver a substantial petroleum consumption advantage and greatly reduce the WTW NO X , VOC and CO emissions; but, if the electricity is generated from burning coal, the BEV bus has no PM 2.5 emission benefit compared to the conventional diesel bus. Currently, the BEV bus increases fossil energy use and CO 2 emissions in the

Relativistic Spacecraft Propelled by Directed Energy

Science.gov (United States)

Kulkarni, Neeraj; Lubin, Philip; Zhang, Qicheng

2018-04-01

Achieving relativistic flight to enable extrasolar exploration is one of the dreams of humanity and the long-term goal of our NASA Starlight program. We derive a relativistic solution for the motion of a spacecraft propelled by radiation pressure from a directed energy (DE) system. Depending on the system parameters, low-mass spacecraft can achieve relativistic speeds, thus enabling interstellar exploration. The diffraction of the DE system plays an important role and limits the maximum speed of the spacecraft. We consider “photon recycling” as a possible method to achieving higher speeds. We also discuss recent claims that our previous work on this topic is incorrect and show that these claims arise from an improper treatment of causality.

Design for Reliability in Renewable Energy Systems

DEFF Research Database (Denmark)

Blaabjerg, Frede; Zhou, Dao; Sangwongwanich, Ariya

2017-01-01

Power electronics are widely used in renewable energy systems to achieve lower cost of energy, higher efficiency and high power density. At the same time, the high reliability of the power electronics products is demanded, in order to reduce the failure rates and ensure cost-effective operation...... of the renewable energy systems. This paper thus describes the basic concepts used in reliability engineering, and presents the status and future trends of Design for Reliability (DfR) in power electronics, which is currently undergoing a paradigm shift to a physics-of-failure approach. Two case studies of a 2 MW...

Summarized achievement report on the Sunshine Project in fiscal 1980 (Hydrogen energy); 1980 nendo seika hokokusho gaiyoshu. Suiso energy

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-04-01

This paper summarizes the achievement report on the Sunshine Project in fiscal 1980 for hydrogen energy research. In hydrogen manufacturing using the electrolytic process, improvements were made on membranes and electrodes. Solid electrolyte electrolysis is also under research. Researches are continued on reaction, separating operation, and device materials for the iodine system cycle in the thermo-chemical method. In the iron system cycle, a reaction experimenting equipment was fabricated on the trial basis, and tests and evaluation were performed on the material and heat balances. In the mixed system cycle, researches on the light irradiation electrolytic process were continued, whereas the light collecting rate was raised by using a lens to increase light intensity, having enhanced successfully the reaction rate to 60 to 80%. A heat diffusion column for HI decomposition and separation (hydrogen acquisition) was discussed in terms of chemical engineering. Development works are continued on metal hydrides for hydrogen transportation, and durability tests are also being performed. Same applies to hydrogen storage. A model burner was fabricated on the trial basis, and catalytic combustion was studied as development of a combustion technology that matches the requirements for safe hydrogen combustion and suppression of NOx emission. Searches were continued on catalysts and solid electrolyte materials for fuel cells. Thin film sold electrolyte fuel cells constructed by using the evaporation process are also being studied. The paper also describes measures for hydrogen safety assurance and researches on energy systems. (NEDO)

Reducing Energy Use in Existing Homes by 30%: Learning From Home Performance with ENERGY STAR

Energy Technology Data Exchange (ETDEWEB)

Liaukus, C. [Building America Research Alliance (BARA), Kent, WA (United States)

2014-12-01

The improvement of existing homes in the United States can have a much greater impact on overall residential energy use than the construction of highly efficient new homes. There are over 130 million existing housing units in the U.S., while annually new construction represents less than two percent of the total supply (U.S. Census Bureau, 2013). Therefore, the existing housing stock presents a clear opportunity and responsibility for Building America (BA) to guide the remodeling and retrofit market toward higher performance existing homes. There are active programs designed to improve the energy performance of existing homes. Home Performance with ENERGY STAR (HPwES) is a market-rate program among them. BARA's research in this project verified that the New Jersey HPwES program is achieving savings in existing homes that meet or exceed BA's goal of 30%. Among the 17 HPwES projects with utility data included in this report, 15 have actual energy savings ranging from 24% to 46%. Further, two of the homes achieved that level of energy savings without the costly replacement of heating and cooling equipment, which indicates that less costly envelope packages could be offered to consumers unable to invest in more costly mechanical packages, potentially creating broader market impact.

Correlation of Conditional Admittance and Student Achievement in an Undergraduate Higher Education Setting

Science.gov (United States)

Parisi, Joe

2012-01-01

This paper explores several research questions that identify differences between conditionally admitted students and regularly admitted students in terms of achievement results at one institution. The research provides specific variables as well as relationships including historical and comparative aggregate data from 2009 and 2010 that indicate…

The Effect of School Improvement Planning on Student Achievement

Science.gov (United States)

Huber, David J.; Conway, James M.

2015-01-01

This study evaluated the hypothesis that schools in Connecticut's Alliance Districts (lowest-performing districts) with higher-quality school improvement plans (SIPs) would have higher levels of student achievement. An exploratory research question evaluated whether SIPs predicted achievement of particular subgroups. SIPs were obtained and scored…

Higher energy efficient homes are associated with increased risk of doctor diagnosed asthma in a UK subpopulation.

Science.gov (United States)

Sharpe, Richard A; Thornton, Christopher R; Nikolaou, Vasilis; Osborne, Nicholas J

2015-02-01

The United Kingdom (UK) has one of the highest prevalence of asthma in the world, which represents a significant economic and societal burden. Reduced ventilation resulting from increased energy efficiency measures acts as a modifier for mould contamination and risk of allergic diseases. To our knowledge no previous study has combined detailed asset management property and health data together to assess the impact of household energy efficiency (using the UK Government's Standard Assessment Procedure) on asthma outcomes in an adult population residing in social housing. Postal questionnaires were sent to 3867 social housing properties to collect demographic, health and environmental information on all occupants. Detailed property data, residency periods, indices of multiple deprivation (IMD) and household energy efficiency ratings were also investigated. Logistic regression was used to calculate odds ratios and confidence intervals while allowing for clustering of individuals coming from the same location. Eighteen percent of our target social housing population were recruited into our study. Adults had a mean age of 59 (SD±17.3) years and there was a higher percentage of female (59%) and single occupancy (58%) respondents. Housing demographic characteristics were representative of the target homes. A unit increase in household Standard Assessment Procedure (SAP) rating was associated with a 2% increased risk of current asthma, with the greatest risk in homes with SAP >71. We assessed exposure to mould and found that the presence of a mouldy/musty odour was associated with a two-fold increased risk of asthma (OR 2.2 95%; CI 1.3-3.8). A unit increase in SAP led to a 4-5% reduction in the risk of visible mould growth and a mouldy/musty odour. In contrast to previous research, we report that residing in energy efficient homes may increase the risk of adult asthma. We report that mould contamination increased the risk of asthma, which is in agreement with existing

Young adolescents who combine alcohol and energy drinks have a higher risk of reporting negative behavioural outcomes.

Science.gov (United States)

Holubcikova, Jana; Kolarcik, Peter; Madarasova Geckova, Andrea; Joppova, Eva; van Dijk, Jitse P; Reijneveld, Sijmen A

2017-04-01

To explore whether young adolescents consuming alcohol and energy drinks combined were more likely to report negative behavioural outcomes than their peers who drink only one type of these beverages or are abstinent. We analysed data on a representative sample of Slovak adolescents 8502 adolescents (mean age 13.21, 49.4 % boys) from the 2014 Health Behaviour in School-aged Children cross-sectional study. We assessed the associations of alcohol and energy drinks consumption with negative outcomes and their potential synergy, as measured by the synergy index (SI). Adolescents consuming both alcohol and energy drinks were at higher risk of negative behavioural outcomes than their peers who drank only alcohol or energy drinks or were non-consumers. Consumers of alcohol and energy drinks were highly prone to be involved in fighting-the joint association of alcohol and energy drinks consumption was greater than sum of its associations separately in relation to fighting (SI 1.49; 95 % confidence interval 1.03-2.16). Preventive strategies should aim at increasing awareness of negative behavioural outcomes-especially aggressive behaviour associated with alcohol and energy drinks consumption among young adolescents.

Green-Frag: Energy-efficient frame fragmentation scheme for wireless sensor networks

KAUST Repository

Daghistani, Anas; Shihada, Basem

2013-01-01

Frame fragmentation techniques aim to achieve higher throughput by reducing retransmissions. Using experiments on a WSN testbed, we show that frame fragmentation also helps to reduce energy consumption. In this paper we propose Green-Frag, a new

Energy conserving site design case study: Shenandoah, Georgia. Final report

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

The case study examines the means by which energy conservation can be achieved at an aggregate community level by using proper planning and analytical techniques for a new town, Shenandoah, Georgia, located twenty-five miles southwest of Atlanta's Hartsfield International Airport. A potentially implementable energy conservation community plan is achieved by a study team examining the land use options, siting characteristics of each building type, alternate infrastructure plans, possible decentralized energy options, and central utility schemes to determine how community energy conservation can be achieved by use of pre-construction planning. The concept for the development of mixed land uses as a passively sited, energy conserving community is based on a plan (Level 1 Plan) that uses the natural site characteristics, maximizes on passive energy siting requirement, and allows flexibility for the changing needs of the developers. The Level 2 Plan is identical with Level 1 plan plus a series of decentraized systems that have been added to the residential units: the single-family detached, the apartments, and the townhouses. Level 3 Plan is similar to the Level 1 Plan except that higher density dwellings have been moved to areas adjacent to central site. The total energy savings for each plan relative to the conventional plan are indicated. (MCW)

Energy management information systems : achieving improved energy efficiency : a handbook for managers, engineers and operational staff

Energy Technology Data Exchange (ETDEWEB)

Hooke, J.H.; Landry, B.J.; Hart, D. [Natural Resources Canada, Ottawa, ON (Canada). Office of Energy Efficiency

2004-07-01

There are many opportunities for industrial and commercial facilities to improve energy efficiency by minimizing waste through process optimization. Large energy users can effectively reduce energy costs, improve profits and reduce greenhouse gas emissions by using computing and control equipment. This book covers all aspects of an Energy Management Information System (EMIS) including metering, data collection, data analysis, reporting and cost benefit analyses. EMIS provides relevant information to businesses that enables them to improve energy performance. EMIS deliverables include early detection of poor performance, support for decision making and effective energy reporting. EMIS also features data storage, calculation of effective targets for energy use and comparative energy consumption. Computer systems can be used to improve business performance in terms of finance, personnel, sales, resource planning, maintenance, process control, design and training. In the 1980s, the Canadian Industry Program for Energy Conservation (CIPEC) developed 2 versions of an energy accounting manual to help industrial, commercial and institutional sectors implement energy-accounting systems. The manual was revised in 1989 and is a useful energy management tool for business and other organizations. The EMIS examples described in this booklet reflect that energy is a variable operating cost, not a fixed overhead charge. 8 tabs., 38 figs.

Climate Wise Achievement Awards: A profile of the award winners

International Nuclear Information System (INIS)

Martin, K.; Milmoe, P.H.; Haydel, J.

1999-01-01

Climate Wise is a partnership initiative sponsored by the US Environmental Protection Agency designed to stimulate the voluntary reduction of greenhouse gas emissions among participating manufacturing companies. Because energy use in the manufacturing sectors accounts for nearly 30% of total US anthropogenic greenhouse gas emissions, industrial energy-efficiency actions can have a significant effect on reducing these emissions. Climate Wise works with US manufacturers to help them take advantage of the environmental and economic benefits of energy-efficiency improvements. The Climate Wise Partnership, Representing 13% of total US industrial energy use, currently has more than 500 partners that are saving money and energy by implementing a wide range of efficiency and waste reduction projects. In November of 1998, Climate Wise held its first annual partner Achievement Awards, recognizing its leading partners for their exceptional achievements in the areas of Leadership, Innovation, Action Planning, and Results. Fourteen companies were recognized for overall environmental performance, and three others were acknowledged for special achievement in specific areas. This paper summarizes the achievements of the Climate Wise partners recognized for their outstanding accomplishments. These case studies highlight their corporate climate goals and strategies, specific energy-efficiency actions implemented, and the anticipated financial benefits, fuel savings, and environmental impacts of these actions

Seasonal Thermal-Energy Storage: A Critical Review on BTES Systems, Modeling, and System Design for Higher System Efficiency

Directory of Open Access Journals (Sweden)

Michael Lanahan

2017-05-01

Full Text Available Buildings consume approximately ¾ of the total electricity generated in the United States, contributing significantly to fossil fuel emissions. Sustainable and renewable energy production can reduce fossil fuel use, but necessitates storage for energy reliability in order to compensate for the intermittency of renewable energy generation. Energy storage is critical for success in developing a sustainable energy grid because it facilitates higher renewable energy penetration by mitigating the gap between energy generation and demand. This review analyzes recent case studies—numerical and field experiments—seen by borehole thermal energy storage (BTES in space heating and domestic hot water capacities, coupled with solar thermal energy. System design, model development, and working principle(s are the primary focus of this analysis. A synopsis of the current efforts to effectively model BTES is presented as well. The literature review reveals that: (1 energy storage is most effective when diurnal and seasonal storage are used in conjunction; (2 no established link exists between BTES computational fluid dynamics (CFD models integrated with whole building energy analysis tools, rather than parameter-fit component models; (3 BTES has less geographical limitations than Aquifer Thermal Energy Storage (ATES and lower installation cost scale than hot water tanks and (4 BTES is more often used for heating than for cooling applications.

Energy conservation in pulp and paper industry: some thoughts

Energy Technology Data Exchange (ETDEWEB)

Sadawarte, N. S.; Prasad, A. K.; Khanolkar, V. D.; Shenoy, S. C.

1980-03-15

The pulp and paper industry is highly energy intensive. In view of the spiralling fuel prices and rising power costs, there is an urgent need to conserve energy through better management of various operations in the industry, from the optimal utilization of the forest residues to the shipment of the final product. The total energy concept, e.g., energy generation, distribution and utilization in Indian paper industry is discussed. The need for an energy audit is emphasized and the formats of energy reporting forms are included. Short and long term measures to be enforced to achieve energy savings in the pulp and paper mills are outlined. Some important energy conservation approaches are also discussed. Factors affecting energy efficiency in a pulp and paper mill are reviewed. Some areas where sustained R and D efforts should be focused to make the paper industry nearly self-sufficient in energy generation and utilization are also given. It is essential to have a National Energy Policy clearly defining achievable targets of energy conservation for industry. The Indian paper industry could advantageously form its own committee to review the operation of the various mills in the country and come out with concrete solutions for higher energy efficiency and more effective conservation of energy.

Summary of achievement reports on the Sunshine Project in fiscal 1978 (Hydrogen energy); 1978 nendo seika hokokusho gaiyoshu. Suiso energy

Energy Technology Data Exchange (ETDEWEB)

NONE

1979-04-01

This paper summarizes achievement reports on the Sunshine Project in fiscal 1978 (hydrogen energy). In hydrogen manufacturing methods, studies are described on materials of membranes and electrodes used in high temperature and pressure electrolysis. In thermo-chemical method, studies are continuing on cycles of the iron system, iodine system, and mixed system (composed by thermal, photo and electro-chemistries). For the iodine system, summary design was performed on an experimental device. For the mixed system, trial fabrication and experiments were carried out on a beam radiation type electrolytic tank that electrolyses quickly HI and Fe{sup 3+} produced in the photo-chemical reaction, and separates the products. Discussions were also given on HI decomposition (hydrogen acquisition) by means of heat diffusion. With respect to storage and transportation, development is being made on optimal metal hydrides. In combustion technologies, discussions are given on combustors and catalysts to break through the dilemma of high NOx emission and frequent occurrence of reverse ignition. For fuel cells, the paper describes developments of the materials thereof, high-temperature solid electrolyte type fuel cells and alkaline aqueous solution electrolyte type fuel cells. Regarding the non-steady hydrogen engines, the paper describes fundamental studies on non-steady jet flow behavior using shock tubes, and single cylinder engine tests. It also describes hydrogen safety assuring measures, and studies on energy systems. (NEDO)

Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Mixed-Humid Climates; January 2006 - December 2006

Energy Technology Data Exchange (ETDEWEB)

Building America Industrialized Housing Partnership (BAIHP); Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Davis Energy Group (DEG); IBACOS; National Association of Home Builders Research Center (NAHBRC); National Renewable Energy Laboratory (NREL)

2006-12-01

The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Mixed-Humid Climate Region on a cost-neutral basis.

Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in the Hot-Dry and Mixed-Dry Climates

Energy Technology Data Exchange (ETDEWEB)

Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Davis Energy Group (DEG); Florida Solar Energy Center (FSEC); IBACOS; National Association of Home Builders Research Center (NAHBRC); National Renewable Energy Laboratory (NREL)

2006-01-01

The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Hot-Dry/Mixed-Dry Climate Region on a cost neutral basis.

Solar Energy Gain and Space-Heating Energy Supply Analyses for Solid-Wall Dwelling Retrofitted with the Experimentally Achievable U-value of Novel Triple Vacuum Glazing

Directory of Open Access Journals (Sweden)

Saim Memon

2017-06-01

Full Text Available A considerable effort is devoted to devising retrofit solutions for reducing space-heating energy in the domestic sector. Existing UK solid-wall dwellings, which have both heritage values and historic fabric, are being improved but they tend to have meagre thermal performance, partly, due to the heat-loss through glazings. This paper takes comparative analyses approach to envisage space-heating supply required in order to maintain thermal comfort temperatures and attainable solar energy gains to households with the retrofit of an experimentally achievable thermal performance of the fabricated sample of triple vacuum glazing to a UK solid-wall dwelling. 3D dynamic thermal models (timely regimes of heating, occupancy, ventilation and internal heat gains of an externally-insulated solid-wall detached dwelling with a range of existing glazing types along with triple vacuum glazings are modelled. A dramatic decrease of space-heating load and moderate increase of solar gains are resulted with the dwelling of newly achievable triple vacuum glazings (having centre-of-pane U-value of 0.33 Wm-2K-1 compared to conventional glazing types. The space-heating annual cost of single glazed dwellings was minimised to 15.31% (≈USD 90.7 with the retrofit of triple-vacuum glazings. An influence of total heat-loss through the fabric of solid-wall dwelling was analysed with steady-state calculations which indicates a fall of 10.23 % with triple vacuum glazings compared to single glazings.

Examining the Academic Achievement-Delinquency Relationship Among Southeast Asian Americans.

Science.gov (United States)

Bui, Laura

2018-05-01

The extent to which poor academic achievement is strongly related to delinquency among Southeast Asian Americans (SEAA) remains unclear; reasons are methodological limitations and aggregated findings for Asian Americans, which mask evidence that SEAA have a higher prevalence of criminality and poor academic performance than other Asian American groups. The present study examines the academic achievement-delinquency relationship in a diverse group of 1,214 SEAA using data from the Children of Immigrants Longitudinal Study (CILS). Propensity score matching (PSM) was used to make causal inferences and assess whether poor academic achieving SEAA, after being matched with higher academic achieving SEAA, displayed a higher prevalence of delinquency. Findings showed that, even after matching, poor academic achieving SEAA were still more likely to exhibit delinquent behavior than those who performed academically better. Interventions targeting SEAA communities will need to focus more on improving academic achievement to directly prevent and decrease delinquent behavior.

New window design options for CEBAF energy upgrade

International Nuclear Information System (INIS)

Phillips, L.; Mammosser, J.; Nguyen, V.

1997-01-01

As the Jefferson Laboratory upgrades the existing CEBAF electron accelerator to operate at higher energies, the fundamental power coupler windows will be required to operate with lower RF dissipation and increased immunity to radiation from cavity field emission. New designs and modifications to existing designs which can achieve these goals are described

Collection of summaries of Sunshine Program achievement reports for fiscal 1982. Hydrogen energy; 1982 nendo sunshine keikaku seika hokokusho gaiyoshu. Suiso energy

Energy Technology Data Exchange (ETDEWEB)

NONE

1983-04-01

The collection includes achievements of research relating to hydrogen energy. In the research on hydrogen production by electrolysis, electrolysis of water using an acid-type solid polymer electrolyte and electrolysis of water using an alkali-type solid polymer electrolyte are taken up. In the research on hydrogen production by thermochemical methods, studies are conducted on the iodine-based cycle, the bromine-based cycle, materials for devices for the iodine-based cycle, and the mixed cycle. Hydrogen production using high-temperature direct thermolysis and solar radiation is also studied. In the research on hydrogen transportation and storage, use of metallic hydrides in these processes are taken up. In the research on the application of hydrogen, techniques of hydrogen combustion and hydrogen-fueled engines are discussed. In the research on hydrogen safety measures, technologies for the prevention of hydrogen explosions and of hydrogen embrittlement of materials in use with hydrogen are studied. In addition, a study is conducted of a hydrogen energy total system, and research and development is carried out for a plant that produces hydrogen by high-temperature high-pressure electrolysis of water. (NEDO)

Energy contracting. Energy-related services and decentral energy supply. 2. ed.; Energie-Contracting. Energiedienstleistungen und dezentrale Energieversorgung

Energy Technology Data Exchange (ETDEWEB)

Hack, Martin

2012-11-01

According to the author, the intended German energy turnaround cannot be achieved solely on the basis of power from renewables and by constructing new passive buildings. Also required are decentral energy services if the energy saving and efficiency goals are to be achieved. In spite of many variations, the basic structure of these is the following: A contractor providing energy services does not only supply energy but also carries the risk and responsibility for efficient supply. This will relieve energy users, whether industrial or trade enterprises, public administration or home owners from this task; also, this integrated approach will open up undeveloped efficiency potentials. The book discusses current legal issues in a clear and practice-oriented manner and also provides a check list for energy contracting and an exemplary contract. (orig./RHM)

Distributed energy store railguns experiment and analysis

Science.gov (United States)

Holland, L. D.

1984-02-01

Electromagnetic acceleration of projectiles holds the potential for achieving higher velocities than yet achieved by any other means. A railgun is the simplest form of electromagnetic macroparticle accelerator and can generate the highest sustained accelerating force. The practical length of conventional railguns is limited by the impedance of the rails because current must be carried along the entire length of the rails. A railgun and power supply system called the distributed energy store railgun was proposed as a solution to this limitation. A distributed energy storage railgun was constructed and successfully operated. In addition to this demonstration of the distributed energy store railgun principle, a theoretical model of the system was also constructed. A simple simulation of the railgun system based on this model, but ignoring frictional drag, was compared with the experimental results. During the process of comparing results from the simulation and the experiment, the effect of significant frictional drag of the projectile on the sidewalls of the bore was observed.

Energy use in Denmark

International Nuclear Information System (INIS)

Schipper, L.; Howarth, R.; Andersson, B.; Price, L.

1993-01-01

This paper reviews the evolution of energy use in Denmark since the early 1970s, in order to shed light on the future path of energy use in Denmark, with particular emphasis on the role of energy efficiency. Improvements in end-use energy efficiency reduced primary energy requirements in Denmark by 22% between 1972 and 1988. This change accounts for two thirds of the decline in the ratio of energy use to gross domestic product that occurred during this time: the rest of the decline was caused by changes in the mix of goods and services produced and consumed by the Danes. Total energy savings achieved between 1972 and 1988 in Denmark ranked among the highest measured in any major OECD country. Overall, most of the energy savings in Denmark were brought about through improvements in technology. Short-term changes in consumer behaviour were significant in reducing energy needs for space heating and transport. An important stimulus for improved efficiency was higher energy prices, led in no small part by significant taxes imposed on small consumers of heating oil, electricity and motor fuels. (author). 21 refs, 20 figs, 2 tabs

Low specific-grinding energy machining of ceramics by a laser dressed diamond grinding stone

International Nuclear Information System (INIS)

Jodan, K.; Matsumaru, K.; Ishizaki, K.

2003-01-01

A laser dressing is an effective dressing method to accomplish efficient ceramic grinding. Since laser dressing achieves protrusion heights of abrasive-grains without grain dislodgment, the number of abrasive-grains in a laser dressed grinding stone (LGS) is higher than that in a mechanically dressed grinding stone (MGS), remaining the initial grain distribution. Thus, the LGS contains higher number of effective cutting edges, and forms higher number of ground grooves on a ground surface than the MGS. Consequently, the LGS can achieve lower specific grinding energy than the MGS. Copyright (2003) AD-TECH - International Foundation for the Advancement of Technology Ltd

Promoting nuclear power, achieving sustainable development of nuclear industry in China

International Nuclear Information System (INIS)

Kang, R.

2006-01-01

The past 5 decades witnessed the rapid growth of China's nuclear industry. The sustained and rapid economic growth and continuous improvement of people's living standards have placed higher requirements for energy and power supplies. As a safe and clean energy source, nuclear energy has been gradually and widely accepted by the Chinese government and the public. The Chinese government has adopted the policy a ctively pushing forward the nuclear power development , set up the target to reach 40GWe of nuclear power installed capacity by 2020, accounting for about 4% of the total installed capacity in China. In this regard, this paper presents the China's nuclear program to illustrate how China is going to achieve the target. The paper is composed of 3 parts. The first part gives a review of the achievements in nuclear power in the last 20 years. The second part presents China's ''three approach'' strategy for furthering the nuclear power development: carrying out duplication projects at the existing plant sites; introducing GUI technology via international bidding; developing the brand C NP1000 , i.e. Chinese Nuclear Power lOOOMwe class, with China's own intellectual property. This part also explores the ways of securing the fuel supply for nuclear power development. The third part concludes with CNNC's ''3221'' strategy which aims at building a world class conglomerate, and expresses its sincere wish to work with the nuclear community to push the nuclear industry worldwide by strengthening international cooperation

Report on achievements in fiscal 1998. Surveys on development of an at-home welfare device system to rationalize energy use; 1998 nendo energy shiyo gorika zaitaku fukushi kiki system kaihatsu chosa itaku kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This paper analyzes and puts into order the data surveyed and discussed on thirteen Welfare Techno-Houses (WTH) from a comprehensive viewpoint. It summarizes findings contributing to development and structuring of new at-home welfare device systems of effective energy utilization type. The paper first puts into order and discusses the survey and study items available for comparison and discussion, and the survey items with originality found in the surveys of the WTH, with which relatively large number of items were surveyed and studied among the thirteen locations nationwide. Next, the paper attempts comprehensive evaluation on the achievements thereof by the following items: (1) measurement and evaluation on energy consumption of different at-home welfare devices, (2) surveys and studies on energy demand evaluation inside and outside the residential houses arranged with considerations for elderly people according to the district characteristics, (3) evaluation on daily, weekly and annual changes in energy consumption in these houses, and (4) design and development of welfare systems of effective energy utilization type for these houses. Furthermore, the paper summarizes the general attributes of the WTHs in different districts, power consumption in these at-home welfare device systems in the WTH and energy consumption of the houses, in the forms available for comparison and discussion. Then, the paper summarizes the achievements of the present surveys and studies on the thirteen WTHs all over the country. (NEDO)

Higher-order gravity in higher dimensions: geometrical origins of four-dimensional cosmology?

Energy Technology Data Exchange (ETDEWEB)

Troisi, Antonio [Universita degli Studi di Salerno, Dipartimento di Fisica ' ' E.R. Caianiello' ' , Salerno (Italy)

2017-03-15

Determining the cosmological field equations is still very much debated and led to a wide discussion around different theoretical proposals. A suitable conceptual scheme could be represented by gravity models that naturally generalize Einstein theory like higher-order gravity theories and higher-dimensional ones. Both of these two different approaches allow one to define, at the effective level, Einstein field equations equipped with source-like energy-momentum tensors of geometrical origin. In this paper, the possibility is discussed to develop a five-dimensional fourth-order gravity model whose lower-dimensional reduction could provide an interpretation of cosmological four-dimensional matter-energy components. We describe the basic concepts of the model, the complete field equations formalism and the 5-D to 4-D reduction procedure. Five-dimensional f(R) field equations turn out to be equivalent, on the four-dimensional hypersurfaces orthogonal to the extra coordinate, to an Einstein-like cosmological model with three matter-energy tensors related with higher derivative and higher-dimensional counter-terms. By considering the gravity model with f(R) = f{sub 0}R{sup n} the possibility is investigated to obtain five-dimensional power law solutions. The effective four-dimensional picture and the behaviour of the geometrically induced sources are finally outlined in correspondence to simple cases of such higher-dimensional solutions. (orig.)

Economic analysis of passive houses and low-energy houses compared with standard houses

International Nuclear Information System (INIS)

Audenaert, A.; Cleyn, S.H. de; Vankerckhove, B.

2008-01-01

As the energy demand used for space heating accounts for 78% of EU15 household delivered energy consumption, significant reductions in energy demand can be achieved by promoting low-energy buildings. Our study investigates three building types: the standard house, the low-energy house and the passive house. As more far-reaching measures concerning energy savings usually lead to higher investments, the aim of our study is to perform an economic analysis in order to determine the economic viability of the three building types

Energy Requirements in Critically Ill Patients

Science.gov (United States)

2018-01-01

During the management of critical illness, optimal nutritional support is an important key for achieving positive clinical outcomes. Compared to healthy people, critically ill patients have higher energy expenditure, thereby their energy requirements and risk of malnutrition being increased. Assessing individual nutritional requirement is essential for a successful nutritional support, including the adequate energy supply. Methods to assess energy requirements include indirect calorimetry (IC) which is considered as a reference method, and the predictive equations which are commonly used due to the difficulty of using IC in certain conditions. In this study, a literature review was conducted on the energy metabolic changes in critically ill patients, and the implications for the estimation of energy requirements in this population. In addition, the issue of optimal caloric goal during nutrition support is discussed, as well as the accuracy of selected resting energy expenditure predictive equations, commonly used in critically ill patients.

Energy Requirements in Critically Ill Patients.

Science.gov (United States)

Ndahimana, Didace; Kim, Eun-Kyung

2018-04-01

During the management of critical illness, optimal nutritional support is an important key for achieving positive clinical outcomes. Compared to healthy people, critically ill patients have higher energy expenditure, thereby their energy requirements and risk of malnutrition being increased. Assessing individual nutritional requirement is essential for a successful nutritional support, including the adequate energy supply. Methods to assess energy requirements include indirect calorimetry (IC) which is considered as a reference method, and the predictive equations which are commonly used due to the difficulty of using IC in certain conditions. In this study, a literature review was conducted on the energy metabolic changes in critically ill patients, and the implications for the estimation of energy requirements in this population. In addition, the issue of optimal caloric goal during nutrition support is discussed, as well as the accuracy of selected resting energy expenditure predictive equations, commonly used in critically ill patients.

Strategic Planning for Higher Education.

Science.gov (United States)

Kotler, Philip; Murphy, Patrick E.

1981-01-01

The framework necessary for achieving a strategic planning posture in higher education is outlined. The most important benefit of strategic planning for higher education decision makers is that it forces them to undertake a more market-oriented and systematic approach to long- range planning. (Author/MLW)

WISC-III and CAS: Which Correlates Higher with Achievement for a Clinical Sample?

Science.gov (United States)

Naglieri, Jack A.; De Lauder, Brianna Y.; Goldstein, Sam; Schwebech, Adam

2006-01-01

The relationships between Wechsler Intelligence Scale for Children-Third Edition (WISC-III) and the Cognitive Assessment System (CAS) with the Woodcock-Johnson Tests of Achievement (WJ-III) were examined for a sample of 119 children (87 males and 32 females) ages 6 to 16. The sample was comprised of children who were referred to a specialty clinic…

Success in Higher Education: The Challenge to Achieve Academic Standing and Social Position

Science.gov (United States)

Life, James

2015-01-01

When students look at their classmates in the classroom, consciously or unconsciously, they see competitors both for academic recognition and social success. How do they fit in relation to others and how do they succeed in achieving both? Traditional views on the drive to succeed and the fear of failure are well known as motivators for achieving…

Achieving Metacognition through Cognitive Strategy Instruction

Science.gov (United States)

Apaydin, Marina; Hossary, Mohamad

2017-01-01

Purpose: The purpose of this paper is to present hands-on techniques that could help achieve higher forms of cognitive work of Bloom's learning taxonomy and progress toward self-actualization, the top of Maslow's hierarchy of needs. These results can be achieved by the combination of Apaydin's 3A approach and integrative learning.…

Green-Frag: Energy-efficient frame fragmentation scheme for wireless sensor networks

KAUST Repository

Daghistani, Anas

2013-10-01

Frame fragmentation techniques aim to achieve higher throughput by reducing retransmissions. Using experiments on a WSN testbed, we show that frame fragmentation also helps to reduce energy consumption. In this paper we propose Green-Frag, a new energy-efficient protocol based on efficient frame fragmentation technique. Green-Frag allows sensor nodes to transmit data with optimal transmit power and frame structure based on environmental conditions. Green-Frag takes into consideration the channel conditions, interference patterns and level, as well as the distance between sender and receiver. The paper discusses various design and implementation considerations for Green-Frag. Using experimental evaluation on a sensor mote testbed, we show that Green-Frag achieves the least energy consumption by choosing the best transmit power according to the channel conditions.

Selectively Fortifying Reconfigurable Computing Device to Achieve Higher Error Resilience

Directory of Open Access Journals (Sweden)

Mingjie Lin

2012-01-01

Full Text Available With the advent of 10 nm CMOS devices and “exotic” nanodevices, the location and occurrence time of hardware defects and design faults become increasingly unpredictable, therefore posing severe challenges to existing techniques for error-resilient computing because most of them statically assign hardware redundancy and do not account for the error tolerance inherently existing in many mission-critical applications. This work proposes a novel approach to selectively fortifying a target reconfigurable computing device in order to achieve hardware-efficient error resilience for a specific target application. We intend to demonstrate that such error resilience can be significantly improved with effective hardware support. The major contributions of this work include (1 the development of a complete methodology to perform sensitivity and criticality analysis of hardware redundancy, (2 a novel problem formulation and an efficient heuristic methodology to selectively allocate hardware redundancy among a target design’s key components in order to maximize its overall error resilience, and (3 an academic prototype of SFC computing device that illustrates a 4 times improvement of error resilience for a H.264 encoder implemented with an FPGA device.

Achieving Energy Savings in Municipal Construction in Long Beach California

Energy Technology Data Exchange (ETDEWEB)

None

2013-03-01

Long Beach Gas and Oil (LBGO), the public gas utility in Long Beach, California, partnered with the U.S. Department of Energy (DOE) to develop and implement solutions to build a new, low-energy modular office building that is at least 50% below requirements set by Energy Standard 90.1-2007 of the American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE), the American National Standards Institute (ANSI), and the Illuminating Engineering Society of America (IESNA) as part of DOE’s Commercial Building Partnerships (CBP) program. The LBGO building, which demonstrates that modular construction can be very energy efficient, is expected to exceed the ASHRAE baseline by about 45%.

Achievement reports on joint research of solar energy power generation field test project in fiscal 1997. Part 2 of 3; 1997 nendo taiyoko hatsuden field test jigyo kyodo kenkyu seika hokokusho 2/3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

This report is a collection of 26 achievement reports on joint research of a solar energy power generation field test project. The major contents of the achievement reports relate to the solar energy power generation field test project (summarized as manufacture and installation of solar energy power generation systems, summary of solar energy power generation facilities, peripheral devices, and daily schedule of the construction). The reports describe achievements of the joint research (names and achievements of the joint research, study presentation, lectures, literatures, status of patents, similar research in and cooperation with other research institutions), generalization of the research, and future problems. Locations of the joint research carried out are libraries, kindergartens, health and welfare centers, children's culture centers, general traffic centers, primary and middle schools, river water purifying facilities, credit banks, manufactories, retail shops at car parking areas, office buildings, hospitals, joint prefectural office buildings, municipal health centers, and prefectural general power generation control stations. (NEDO)

Achieving energy security through integrated Canadian-American markets

Energy Technology Data Exchange (ETDEWEB)

Moens, A. [Fraser Inst., Vancouver, BC (Canada); Rastin, T.; O' Keefe, G. [Simon Fraser Univ., Burnaby, BC (Canada)

2006-07-01

The oil and gas sector in the United States and Canada has become increasingly integrated over the last 2 decades, and competitive market forces have displaced attempts at government intervention in both countries. Regulatory measures in both countries are often geared to optimize free-market exchanges. As a result, trade in oil, gas, and electricity is flourishing between Canada and the United States. This paper argued that the relationship between the United States and Canada is under increasing pressure to change. In Canada, energy nationalism and the rising importance of Alberta's oil sands deposits may cause other regions to look at political methods to redistribute wealth or redirect trade flows. The extraction methods used by the oil sands industry as well as Arctic, offshore oil and coalbed methane (CBM) industries are more detrimental to the environment than traditional methods of energy source development, and may attract critics who will call for freezes on production and excessive government intervention. Data on energy production, consumption and trade in North America was provided as well as a history of the evolution of market and regulatory conditions. Challenges and opportunities in the oil and gas sector were outlined. It was recommended that governments in both countries emphasize their commitment to market-based solutions and attempt to remove uncertainties arising from environmental restrictions and First Nations claims. 104 refs.

Achieving energy security through integrated Canadian-American markets

International Nuclear Information System (INIS)

Moens, A.; Rastin, T.; O'Keefe, G.

2006-01-01

The oil and gas sector in the United States and Canada has become increasingly integrated over the last 2 decades, and competitive market forces have displaced attempts at government intervention in both countries. Regulatory measures in both countries are often geared to optimize free-market exchanges. As a result, trade in oil, gas, and electricity is flourishing between Canada and the United States. This paper argued that the relationship between the United States and Canada is under increasing pressure to change. In Canada, energy nationalism and the rising importance of Alberta's oil sands deposits may cause other regions to look at political methods to redistribute wealth or redirect trade flows. The extraction methods used by the oil sands industry as well as Arctic, offshore oil and coalbed methane (CBM) industries are more detrimental to the environment than traditional methods of energy source development, and may attract critics who will call for freezes on production and excessive government intervention. Data on energy production, consumption and trade in North America was provided as well as a history of the evolution of market and regulatory conditions. Challenges and opportunities in the oil and gas sector were outlined. It was recommended that governments in both countries emphasize their commitment to market-based solutions and attempt to remove uncertainties arising from environmental restrictions and First Nations claims. 104 refs

High academic achievement in psychotic students.

Science.gov (United States)

Defries, Z; Grothe, L

1978-02-01

The authors studied 21 schizophrenic and borderline college students who achieved B+ or higher grade averages and underwent psychotherapy while in college. High academic achievement was found to provide relief from feelings of worthlessness and ineffectuality resulting from poor relationships with parents, siblings, and peers. Psychotherapy and the permissive yet supportive college atmosphere reinforced the students' self-esteem.

The effectiveness of advance organiser model on students' academic achievement in learning work and energy

Science.gov (United States)

Gidena, Asay; Gebeyehu, Desta

2017-11-01

The purpose of this study was to investigate the effectiveness of the advance organiser model (AOM) on students' academic achievement in learning work and energy. The design of the study was quasi-experimental pretest-posttest nonequivalent control groups. The total population of the study was 139 students of three sections in Endabaguna preparatory school in Tigray Region, Ethiopia. Two sections with equivalent means on the pretest were taken to participate in the study purposely and one section assigned as the experimental group and the other section assigned as the control group randomly. The experimental group was taught using the lesson plan based on the AOM, and the control group was taught using the lesson plan based on the conventional teaching method. Pretest and posttest were administered before and after the treatment, respectively. Independent sample t-test was used to analyse the data at the probability level of 0.05. The findings of the study showed that the AOM was more effective than the conventional teaching method with effect size of 0.49. This model was also effective to teach male and female students and objectives namely understanding and application. However, both methods were equally important to teach work and energy under the objective knowledge level.

The effect of higher order different meson exchange nucleon-nucleon interactions on the three-nucleon binding energy coupling problem

International Nuclear Information System (INIS)

Osman, A.; Ramadan, S.

1989-01-01

Faddeev equations of bound three-nucleon system are presented as a set of integral equations. To solve them, a sutable form of the nucleon-nucleon interactions is used: with the exchange of a scalar meson, a pseudoscalar meson and a massless vector meson. Higher orders of these different meson exchanges in the nucleon-nucleon interactions have been taken into account. With these nuclear forces and nucleon-nucleon interactions, the three-nucleon binding energy is calculated by solving the Faddeev integral equations. The obtained value of the three-nucleon binding energy is 8.441 MeV. The inclusion of the higher order terms of the different meson exchange in the nuclear nucleon-nucleon interaction is found to affect the three-nucleon binding by about 3.92%. 3 figs., 16 refs

Higher-capacity lithium ion battery chemistries for improved residential energy storage with micro-cogeneration

International Nuclear Information System (INIS)

Darcovich, K.; Henquin, E.R.; Kenney, B.; Davidson, I.J.; Saldanha, N.; Beausoleil-Morrison, I.

2013-01-01

Highlights: • Characterized two novel high capacity electrode materials for Li-ion batteries. • A numerical discharge model was run to characterize Li-ion cell behavior. • Engineering model of Li-ion battery pack developed from cell fundamentals. • ESP-r model integrated micro-cogeneration and high capacity Li-ion storage. • Higher capacity batteries shown to improve micro-cogeneration systems. - Abstract: Combined heat and power on a residential scale, also known as micro-cogeneration, is currently gaining traction as an energy savings practice. The configuration of micro-cogeneration systems is highly variable, as local climate, energy supply, energy market and the feasibility of including renewable type components such as wind turbines or photovoltaic panels are all factors. Large-scale lithium ion batteries for electrical storage in this context can provide cost savings, operational flexibility, and reduced stress on the distribution grid as well as a degree of contingency for installations relying upon unsteady renewables. Concurrently, significant advances in component materials used to make lithium ion cells offer performance improvements in terms of power output, energy capacity, robustness and longevity, thereby enhancing their prospective utility in residential micro-cogeneration installations. The present study evaluates annual residential energy use for a typical Canadian home connected to the electrical grid, equipped with a micro-cogeneration system consisting of a Stirling engine for supplying heat and power, coupled with a nominal 2 kW/6 kW h lithium ion battery. Two novel battery cathode chemistries, one a new Li–NCA material, the other a high voltage Ni-doped lithium manganate, are compared in the residential micro-cogeneration context with a system equipped with the presently conventional LiMn 2 O 4 spinel-type battery

Community energy planning in Canada. The role of renewable energy

International Nuclear Information System (INIS)

St Denis, Genevieve; Parker, Paul

2009-01-01

An emerging trend in Canada is the creation of community energy plans, where decisions that used to be left to regional level energy agencies or private individuals are now being considered at the community level. A desire to reduce greenhouse gas emissions and to become more energy self-sufficient is driving this change. Theoretically, local level management is desirable because it achieves these goals through improvements in the three areas of energy efficiency, energy conservation and switching to renewable energy sources. The analysis of 10 of the first community energy plans in Canadian communities, ranging in population size from 500 to one million, finds that communities are choosing policies and programs centred on increasing energy efficiency and conservation while renewable energy receives much less attention. Municipal operations were called upon to set higher targets than the general community. Communities that recognized the substantial potential of renewable energy often focused on technologies that the municipal sector could implement, such as bio-fuels for their transportation fleet. Wind, passive solar design, solar photovoltaics and solar thermal options were only recommended in a few cases. Overall, only one of the five larger communities (Calgary) recommended implementing multiple renewable energy technologies while three of the five smaller communities proposed multiple renewable energy sources. The implication is that smaller and more remote communities may be the most willing to lead in the planned introduction of renewable energy systems. (author)

Inhibition of breathing after surfactant depletion is achieved at a higher arterial PCO2 during ventilation with liquid than with gas

Directory of Open Access Journals (Sweden)

Sindelar Richard

2005-03-01

Full Text Available Abstract Background Inhibition of phrenic nerve activity (PNA can be achieved when alveolar ventilation is adequate and when stretching of lung tissue stimulates mechanoreceptors to inhibit inspiratory activity. During mechanical ventilation under different lung conditions, inhibition of PNA can provide a physiological setting at which ventilatory parameters can be compared and related to arterial blood gases and pH. Objective To study lung mechanics and gas exchange at inhibition of PNA during controlled gas ventilation (GV and during partial liquid ventilation (PLV before and after lung lavage. Methods Nine anaesthetised, mechanically ventilated young cats (age 3.8 ± 0.5 months, weight 2.3 ± 0.1 kg (mean ± SD were studied with stepwise increases in peak inspiratory pressure (PIP until total inhibition of PNA was attained before lavage (with GV and after lavage (GV and PLV. Tidal volume (Vt, PIP, oesophageal pressure and arterial blood gases were measured at inhibition of PNA. One way repeated measures analysis of variance and Student Newman Keuls-tests were used for statistical analysis. Results During GV, inhibition of PNA occurred at lower PIP, transpulmonary pressure (Ptp and Vt before than after lung lavage. After lavage, inhibition of inspiratory activity was achieved at the same PIP, Ptp and Vt during GV and PLV, but occurred at a higher PaCO2 during PLV. After lavage compliance at inhibition was almost the same during GV and PLV and resistance was lower during GV than during PLV. Conclusion Inhibition of inspiratory activity occurs at a higher PaCO2 during PLV than during GV in cats with surfactant-depleted lungs. This could indicate that PLV induces better recruitment of mechanoreceptors than GV.

Energy Information Augmented Community-Based Energy Reduction

Directory of Open Access Journals (Sweden)

Mark Rembert

2012-06-01

Full Text Available More than one-half of all U.S. states have instituted energy efficiency mandates requiring utilities to reduce energy use. To achieve these goals, utilities have been permitted rate structures to help them incentivize energy reduction projects. This strategy is proving to be only modestly successful in stemming energy consumption growth. By the same token, community energy reduction programs have achieved moderate to very significant energy reduction. The research described here offers an important tool to strengthen the community energy reduction efforts—by providing such efforts energy information tailored to the energy use patterns of each building occupant. The information provided most importantly helps each individual energy customer understand their potential for energy savings and what reduction measures are most important to them. This information can be leveraged by the leading community organization to prompt greater action in its community. A number of case studies of this model are shown. Early results are promising.

Achieving Energy Savings in Municipal Construction in Long Beach, CA

Energy Technology Data Exchange (ETDEWEB)

Parrish, Kristen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Regnier, Cindy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2012-01-01

Long Beach Gas and Oil (LBGO), the public gas utility in Long Beach, California, partnered with the U.S. Department of Energy (DOE) to develop and implement solutions to build a new, low-energy modular office building that is at least 50% below requirements set by Energy Standard 90.1-2007 of the American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE), the American National Standards Institute (ANSI), and the Illuminating Engineering Society of America (IESNA) as part of DOE’s Commercial Building Partnerships (CBP) program.3 The LBGO building, which demonstrates that modular construction can be very energy efficient, is expected to exceed the ASHRAE baseline by about 45%. The new 15,000-square foot (ft2) LBGO office building has two stories and houses private offices, open-plan cubicle offices, and a conference room and call center on the second floor. The building’s modular nature allowed LBGO to realize the cost benefits of fasttracked construction while saving substantial energy and reducing operational costs. The project was funded by the utility’s ratepayer revenue, which imposed a tight budget limit. The design process was a collaborative effort involving LBGO and its design-build team, Lawrence Berkeley National Laboratory (Berkeley Lab), and subcontractors Stantec (formerly Burt Hill) and LHB Inc. The team proposed efficiency measures based on computer modeling of the building in full compliance with ASHRAE 90.1-2007; in the modeled building, the lighting and cooling systems were the largest energy users, so increasing the efficiency of these systems was a top priority. Promising measures were modeled to estimate their energy performance, and each measure was evaluated for its feasibility within the budget.

Energy Choices. The energy markets and the energy policy choices

International Nuclear Information System (INIS)

Bergman, Lars; Lindh, Hampus

2009-03-01

Well-functioning energy markets are in society's interests whatever the circumstances. Furthermore, supply, demand and the competitive situation in the various energy markets influence the effect of energy and climate change policy measures. There are therefore good reasons to examine and evaluate how the energy markets operate. In this report we specifically focus on the energy markets. The analysis has been carried out against the background of the overall objectives for energy and climate change policy in Sweden and the EU. However, for these goals to be attainable a number of concrete energy and climate change policy decisions will have to be taken in the coming years. Some of these are key issues that will prove decisive for the formulation of energy and climate change policy, and we therefore also discuss these. The first of these concerns which policy instruments should be chosen to influence the energy markets. The second key issue concerns the power companies' prospects for using nuclear power even in the future. We will also focus on the extent to which energy and climate change policy chooses to prioritise measures which mean that climate change policy objectives can be achieved at the lowest possible cost. We can briefly summarize our results in the following conclusions: The cost of achieving the climate change policy objectives set by Sweden and the EU will probably be very high. It is therefore important that the choices made ensure that climate change policy objectives are achieved at the lowest possible cost. Focusing on keeping costs to a minimum may in actual fact be the very thing that makes it at all possible to achieve these goals. The best solution then is as far as possible to base energy and climate change policy on so-called market-based instruments, such as emission charges and tradable emission permits. Emissions of carbon dioxide are easy to measure and the siting of emission sources is irrelevant in terms of the effect of the emissions

Cellular energy allocation in zebra mussels exposed along a pollution gradient: linking cellular effects to higher levels of biological organization

International Nuclear Information System (INIS)

Smolders, R.; Bervoets, L.; Coen, W. de; Blust, R.

2004-01-01

Organisms exposed to suboptimal environments incur a cost of dealing with stress in terms of metabolic resources. The total amount of energy available for maintenance, growth and reproduction, based on the biochemical analysis of the energy budget, may provide a sensitive measure of stress in an organism. While the concept is clear, linking cellular or biochemical responses to the individual and population or community level remains difficult. The aim of this study was to validate, under field conditions, using cellular energy budgets [i.e. changes in glycogen-, lipid- and protein-content and mitochondrial electron transport system (ETS)] as an ecologically relevant measurement of stress by comparing these responses to physiological and organismal endpoints. Therefore, a 28-day in situ bioassay with zebra mussels (Dreissena polymorpha) was performed in an effluent-dominated stream. Five locations were selected along the pollution gradient and compared with a nearby (reference) site. Cellular Energy Allocation (CEA) served as a biomarker of cellular energetics, while Scope for Growth (SFG) indicated effects on a physiological level and Tissue Condition Index and wet tissue weight/dry tissue weight ratio were used as endpoints of organismal effects. Results indicated that energy budgets at a cellular level of biological organization provided the fastest and most sensitive response and energy budgets are a relevant currency to extrapolate cellular effects to higher levels of biological organization within the exposed mussels. - Exposure of zebra mussels along a pollution gradient has adverse effects on the cellular energy allocation, and results can be linked with higher levels of biological organization

Cellular energy allocation in zebra mussels exposed along a pollution gradient: linking cellular effects to higher levels of biological organization

Energy Technology Data Exchange (ETDEWEB)

Smolders, R.; Bervoets, L.; Coen, W. de; Blust, R

2004-05-01

Organisms exposed to suboptimal environments incur a cost of dealing with stress in terms of metabolic resources. The total amount of energy available for maintenance, growth and reproduction, based on the biochemical analysis of the energy budget, may provide a sensitive measure of stress in an organism. While the concept is clear, linking cellular or biochemical responses to the individual and population or community level remains difficult. The aim of this study was to validate, under field conditions, using cellular energy budgets [i.e. changes in glycogen-, lipid- and protein-content and mitochondrial electron transport system (ETS)] as an ecologically relevant measurement of stress by comparing these responses to physiological and organismal endpoints. Therefore, a 28-day in situ bioassay with zebra mussels (Dreissena polymorpha) was performed in an effluent-dominated stream. Five locations were selected along the pollution gradient and compared with a nearby (reference) site. Cellular Energy Allocation (CEA) served as a biomarker of cellular energetics, while Scope for Growth (SFG) indicated effects on a physiological level and Tissue Condition Index and wet tissue weight/dry tissue weight ratio were used as endpoints of organismal effects. Results indicated that energy budgets at a cellular level of biological organization provided the fastest and most sensitive response and energy budgets are a relevant currency to extrapolate cellular effects to higher levels of biological organization within the exposed mussels. - Exposure of zebra mussels along a pollution gradient has adverse effects on the cellular energy allocation, and results can be linked with higher levels of biological organization.

Lower limit on the achievable temperature in resonator-based sideband cooling

Science.gov (United States)

Grajcar, M.; Ashhab, S.; Johansson, J. R.; Nori, F.

2009-03-01

A resonator with eigenfrequency φr can be effectively used as a cooler for another linear oscillator with a much smaller frequency φmφr. A huge cooling effect, which could be used to cool a mechanical oscillator below the energy of quantum fluctuations, has been predicted by several authors. However, here we show that there is a lower limit T^* on the achievable temperature, given by T^* = Tm; φm/ φr, that was not considered in previous work and can be higher than the quantum limit in realistic experimental realizations. We also point out that the decay rate of the resonator, which previous studies stress should be small, must be larger than the decay rate of the cooled oscillator for effective cooling. M. Grajcar, S. Ashhab, J.R. Johansson, F. Nori, Lower limit on the achievable temperature in resonator-based sideband cooling, Phys. Rev. B 78, 035406 (2008). URL: http://link.aps.org/abstract/PRB/v78/e035406

Maui energy storage study.

Energy Technology Data Exchange (ETDEWEB)

Ellison, James; Bhatnagar, Dhruv; Karlson, Benjamin

2012-12-01

This report investigates strategies to mitigate anticipated wind energy curtailment on Maui, with a focus on grid-level energy storage technology. The study team developed an hourly production cost model of the Maui Electric Company (MECO) system, with an expected 72 MW of wind generation and 15 MW of distributed photovoltaic (PV) generation in 2015, and used this model to investigate strategies that mitigate wind energy curtailment. It was found that storage projects can reduce both wind curtailment and the annual cost of producing power, and can do so in a cost-effective manner. Most of the savings achieved in these scenarios are not from replacing constant-cost diesel-fired generation with wind generation. Instead, the savings are achieved by the more efficient operation of the conventional units of the system. Using additional storage for spinning reserve enables the system to decrease the amount of spinning reserve provided by single-cycle units. This decreases the amount of generation from these units, which are often operated at their least efficient point (at minimum load). At the same time, the amount of spinning reserve from the efficient combined-cycle units also decreases, allowing these units to operate at higher, more efficient levels.

Achievement report on research and development in the Sunshine Project in fiscal 1977. Hydrogen energy; 1977 nendo seika hokokusho gaiyoshu. Suiso energy

Energy Technology Data Exchange (ETDEWEB)

NONE

1978-04-01

This paper summarizes achievements in the Sunshine Project related to hydrogen energy in fiscal 1977. In the electrolytic process in hydrogen manufacturing technologies, new composite materials are developed in relation with membranes and electrodes as the high temperature and pressure water decomposition method. A bench-scale water decomposition tank using organic polymer ion exchange membranes is fabricated on a trial basis and tested for studying solid electrolyte decomposition method. In hydrogen manufacturing technologies using thermo-chemical process, discussions are being given on cycles of iron systems, iodine systems and hybrid systems (mixture of thermo and photo chemistry and electrochemistry). For hydrogen transporting and storing technologies, metal hydrides most suitable for hydrogen storage are developed, and storage systems are studied. In hydrogen combustion, elucidation is made on fundamental conditions for mixed and single combustion technologies suitable for prevention of reverse ignition and suppression of NOx generation. Studies are also being made on fuel cells using aqueous solution and solid electrolytes. Studies on hydrogen fueled engines are also described. In hydrogen safety assuring technologies, discussions are being given on prevention of explosion disasters, prevention of embrittlement of materials due to hydrogen and criteria for safety assuring technologies. Descriptions are given also on studies on total hydrogen energy systems and hydrogen fueled automobiles. (NEDO)

Fiscal 1999 report on basic research for promotion of joint implementation programs. Research on potential for higher energy efficiency through instrumentation, control, and energy saving equipment (Research report); 1999 nendo keisoku seigyo oyobi sho energy kiki ni yoru sho energy potential chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

As part of the 'clean development mechanism (CDM)' activities to be conducted by advanced nations jointly with developing nations, a survey is conducted of potential for higher energy efficiency, the effect of greenhouse gas reduction, and the effect of related investments in Egypt's textile (dyeing) industry. As the result, it is found that the Egyptian textile (dyeing) industry is rich in potential for higher energy efficiency and that intensification of energy management with importance attached to instrumentation will be quite effective. Private plants, though small in scale, enjoy a high operating rate and are full of life. As for their energy management, however, though management oriented instrumentation is found to stay without being scattered or lost in case of newly introduced equipment, normal operation is impeded by damaged parts which are not duly repaired or replaced. As for state operated plants, they are large in scale and are provided with some leading-edge facilities. Many of them are obsolete, however, and a privatization plan is under consideration, these discouraging investors and reducing vitality. Operation control or quality control are not sufficiently practiced in the administration of plants, and they need improvement. (NEDO)

Electrical Energy Storage for Renewable Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Helms, C. R. [Univ. of Texas, Dallas, TX (United States); Cho, K. J. [Univ. of Texas, Dallas, TX (United States); Ferraris, John [Univ. of Texas, Dallas, TX (United States); Balkus, Ken [Univ. of Texas, Dallas, TX (United States); Chabal, Yves [Univ. of Texas, Dallas, TX (United States); Gnade, Bruce [Univ. of Texas, Dallas, TX (United States); Rotea, Mario [Univ. of Texas, Dallas, TX (United States); Vasselli, John [Univ. of Texas, Dallas, TX (United States)

2012-08-31

This program focused on development of the fundamental understanding necessary to significantly improve advanced battery and ultra-capacitor materials and systems to achieve significantly higher power and energy density on the one hand, and significantly lower cost on the other. This program spanned all the way from atomic-level theory, to new nanomaterials syntheses and characterization, to system modeling and bench-scale technology demonstration. This program not only delivered significant advancements in fundamental understanding and new materials and technology, it also showcased the power of the cross-functional, multi-disciplinary teams at UT Dallas and UT Tyler for such work. These teams are continuing this work with other sources of funding from both industry and government.

Energy efficiency in India: Achievements, challenges and legality

International Nuclear Information System (INIS)

Sahoo, Sarat Kumar; Varma, Payal; Lall, Krishna Prabhakar; Talwar, Chanpreet Kaur

2016-01-01

This paper explores the main legal Center enforced Commissions and Acts that are aimed at improving the current energy deficit in the country, with a specific emphasis on the need for research and a shift in the power market towards more sustainable technology. The paper first examines the main aims of the governmental 5 year plans in the past ten years, and then evaluates the merits and short comings of the existing technical framework that governs the Electrical Grid and Generation systems in the country. The paper also proposes inherent improvements, with ground scale methods in developing a sound and competitive system for power distribution through consumer and employee involvement as well as changes in the investment arena that can substantially alter the market compatibility of renewably generated energy. The paper indicates several key steps that the Center and State Governments have taken in order to revolutionise the feasibility of the electrical systems in the country. Finally, the paper appraises and assesses the main amendments in the Electrical Industry Legal literature and enforcement mechanisms that can effectuate rapid and systemic changes across the Indian context. - Highlights: • Discuss Opportunities and Challenges of Energy Efficiency in India's power sector. • Explores the legal Center enforced Commissions and Acts on the power market. • Governmental 5 years plan for the Electrical Grid and Generation systems. • Center and State Governments steps taken to revolutionize the electrical systems. • Appraises and assesses the main amendments in the Electrical Industry.

Energy education in the higher education systems of California

International Nuclear Information System (INIS)

Mandra, Y.T.

1991-01-01

At San Francisco State University and the University of California, Santa Barbara there is an energy course: Societal Problems of Energy that is designed for non-science majors. The course has as its central theme two of the most controversial uses of commercial energy in California: Offshore oil production; and commercial nuclear power as a source of electricity. This paper deals only with the nuclear portion of the course. Three sub-topics are presented: Radiation, plant safety, and the burial of the high level nuclear waste of commercial plants. The method of teaching this class is different because of the field trips and the large number of guest experts who speak to the class

The USSR long-term energy program in action

International Nuclear Information System (INIS)

Troitskij, A.A.; Shamrayev, N.G.; Makarov, A.A.; Volfberg, D.B.; Pravednikov, N.K.

1989-09-01

Five years have passed since the adoption of the USSR Energy Program developed up to the end of the 20th century. The present report covers main results of this Program. Fuel production and extraction has grown up, substantial increases have been achieved in electricity production, improvements have been made in the energy balance structure and energy efficiency of public production. The arrears in oil and coal production which became apparent in the early 80s were caught up, and losses of associated petroleum gases were lowered. The actual production of natural gas has turned out to be higher as compared with the level stipulated in the Program. The Chernobyl accident has contributed to a certain limitation in the scale of growth of nuclear electricity production. Nevertheless, the nuclear power industry remains to be the most dynamically developing branch in electricity production. Of paramount importance in the USSR Energy Program is the role played by the progress of science and technology - the major means of raising efficiency of the fuel-and-energy complex and achieving the targets in the field of energy conservation. It is also planned to show the role of the USSR Energy Program in solving energy problems in CMEA member countries, in developing mutually beneficial international cooperation in the field of energy. 2 tabs

Achievement reports on joint research of solar energy power generation field test project in fiscal 1997. Part 3 of 3; 1997 nendo taiyoko hatsuden field test jigyo kyodo kenkyu seika hokokusho 3/3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

This report is a collection of 40 achievement reports on joint research of a solar energy power generation field test project. The major contents of the achievement reports relate to the solar energy power generation field test project (summarized as manufacture and installation of solar energy power generation systems, summary of solar energy power generation facilities, status of installation of solar cells, peripheral devices, and daily schedule of the construction). The reports describe achievements of the joint research (names and achievements of the joint research, study presentation, lectures, literatures, status of patents, similar research in and cooperation with other research institutions), generalization of the research, and future problems. Locations of the joint research carried out are hospitals, township hospitals, a science hall for youths, study and educational cities, primary schools, middle schools, high schools, universities, senior health centers, a life cooperative association, retails shops, factories, office buildings, joint governmental office buildings, Shinkansen stations, prefectural industrial testing centers, health and welfare centers, FM broadcasting studios, a town operated hall of technologies, prefectural office buildings and training centers. (NEDO)

How to achieve a sustainable future for Europe?

Directory of Open Access Journals (Sweden)

Blinc Robert

2008-01-01

Full Text Available According to the Lisbon declaration from 2000 the goal of European Union is to become by 2010 the most competitive and dynamic knowledge-driven economy and by 2025 a sustainable knowledge society. The EU however faces some strong challenges on the road toward these goals and is evidently lagging behind both USA and Japan. Our analysis is based on six dimensions of these challenges, including the economic challenge, the demographic challenge, the scientific challenge, the challenge of higher education, the challenge of European governance and identity/system of values, and the environmental/ecotechnological challenge. We argue that if we are to provide a sustainable secure environment and prosperity for next generations, we have to act now at least with developments in particular in the direction of clean, cheap, and renewable energy sources with an emphasis on basic, curiosity driven research which through scientific breakthroughs, is the only realistic solution to solving world's energy requirements. Such an action could for example facilitate the transition from fossil fuels to solar power in a relatively short time of about two decades, and help EU achieve its declared sustainability targets.

Final Technical Report: "Achieving Regional Energy Efficiency Potential in the Southeast”

Energy Technology Data Exchange (ETDEWEB)

Mahoney, Mandy [Southeast Energy Efficiency Alliance (SEEA), Atlanta, GA (United States)

2018-03-07

The overall objective of this award was to facilitate sharing of DOE resources and best practices as well as provide technical assistance to key stakeholders to support greater compliance with energy efficiency standards and increased energy savings. The outcomes of this award include greater awareness among key stakeholders on energy efficiency topics, increased deployment and utilization of DOE resources, and effective policies and programs to support energy efficiency in the Southeast.

An optimized surface plasmon photovoltaic structure using energy transfer between discrete nano-particles.

Science.gov (United States)

Lin, Albert; Fu, Sze-Ming; Chung, Yen-Kai; Lai, Shih-Yun; Tseng, Chi-Wei

2013-01-14

Surface plasmon enhancement has been proposed as a way to achieve higher absorption for thin-film photovoltaics, where surface plasmon polariton(SPP) and localized surface plasmon (LSP) are shown to provide dense near field and far field light scattering. Here it is shown that controlled far-field light scattering can be achieved using successive coupling between surface plasmonic (SP) nano-particles. Through genetic algorithm (GA) optimization, energy transfer between discrete nano-particles (ETDNP) is identified, which enhances solar cell efficiency. The optimized energy transfer structure acts like lumped-element transmission line and can properly alter the direction of photon flow. Increased in-plane component of wavevector is thus achieved and photon path length is extended. In addition, Wood-Rayleigh anomaly, at which transmission minimum occurs, is avoided through GA optimization. Optimized energy transfer structure provides 46.95% improvement over baseline planar cell. It achieves larger angular scattering capability compared to conventional surface plasmon polariton back reflector structure and index-guided structure due to SP energy transfer through mode coupling. Via SP mediated energy transfer, an alternative way to control the light flow inside thin-film is proposed, which can be more efficient than conventional index-guided mode using total internal reflection (TIR).

Achievement goal profiles and developments in effort and achievement in upper elementary school.

Science.gov (United States)

Hornstra, Lisette; Majoor, Marieke; Peetsma, Thea

2017-12-01

The multiple goal perspective posits that certain combinations of achievement goals are more favourable than others in terms of educational outcomes. This study aimed to examine longitudinally whether students' achievement goal profiles and transitions between profiles are associated with developments in self-reported and teacher-rated effort and academic achievement in upper elementary school. Participants were 722 fifth-grade students and their teachers in fifth and sixth grade (N = 68). Students reported on their achievement goals and effort in language and mathematics three times in grade 5 to grade 6. Teachers rated students' general school effort. Achievement scores were obtained from school records. Goal profiles were derived with latent profile and transition analyses. Longitudinal multilevel analyses were conducted. Theoretically favourable goal profiles (high mastery and performance-approach goals, low on performance-avoidance goals), as well as transitions from less to more theoretically favourable goal profiles, were associated with higher levels and more growth in effort for language and mathematics and with stronger language achievement gains. Overall, these results provide support for the multiple goal perspective and show the sustained benefits of favourable goal profiles beyond effects of cognitive ability and background characteristics. © 2017 The Authors. British Journal of Education Psychology published by John Wiley & Sons Ltd on behalf of British Psychological Society.

U.S. Department of Energy Zero Energy Ready Home Implementation

Energy Technology Data Exchange (ETDEWEB)

VonThoma, E. [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership; Mosiman, G. [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership

2017-07-01

This report documents the process and outcomes involved in achieving the U.S. Department of Energy Zero Energy Ready Home (ZERH) program certification standards while helping homebuilders in Climate Zones 5 and 6 in the Upper Midwest achieve ZERH certification.

Achieving low return temperature for domestic hot water preparation by ultra-low-temperature district heating

DEFF Research Database (Denmark)

Yang, Xiaochen; Svendsen, Svend

2017-01-01

District heating (DH) is a cost-effective method of heat supply, especially to area with high heat density. Ultra-low-temperature district heating (ULTDH) is defined with supply temperature at 35-45 degrees C. It aims at making utmost use of the available low-temperature energy sources. In order...... to achieve high efficiency of the ULTDH system, the return temperature should be as low as possible. For the energy-efficient buildings in the future, it is feasible to use ULTDH to cover the space heating demand. However, considering the comfort and hygiene requirements of domestic hot water (DHW...... lower return temperature and higher efficiency for DHW supply, an innovative substation was devised, which replaced the bypass with an instantaneous heat exchanger and a micro electric storage tank. The energy performance of the proposed substation and the resulting benefits for the DH system...

How to Achieve CO2 Emission Reduction Goals by 2050. Abstracts of the 22nd Forum: Energy Day in Croatia

International Nuclear Information System (INIS)

2013-01-01

This years' annual Forum is held twenty-two years in a row. Analysing the energy development to 2050 takes into consideration the nature and complexity of the energy development, a long period of preparing plants and facilities, a long service life of plants, dimensions of technological development and continuous growth of energy demand. New reasons for a long-term observation of the energy development, at least by 2050, are climate change and radical reducing emissions of carbon dioxide and other greenhouse gases according to the EU Energy Policy to 2050. The impact of permitted level of carbon dioxide emissions on the energy production and consumption is drastic and fundamentally changes the structure of energy production and consumption. The new legal and economical approach as well as the new technological development and and political determination are required for the implementation of energy policy which should lead to radical reduction of carbon dioxide emissions. The time is also an important factor because postponement of defining the new approach of energy policy decreases the possibility of its realisation. An additional argument for a new technological development is the mobilization of the science and industry for achieving that new step in technological development. This development is required in order to develop the energy industry without or with minimal greenhouse gas emissions. Furthermore, it is very important for renewable energy, at the carbon dioxide capture and storage, at the energy efficiency in the whole range of activities, from the production, transmission and distribution to the consumption of devices and equipment used by consumers, at smart grids, at the energy storage and vehicles. Reducing the energy consumption in buildings is energy, economical, architectual and organizational project which has to include every commercial and residential building. It is important to eliminate all disadvantages that incurred in the period when

Alternative Energy for Higher Education

Energy Technology Data Exchange (ETDEWEB)

Michael Cherney, PhD

2012-02-22

This project provides educational opportunities creating both a teaching facility and center for public outreach. The facility is the largest solar array in Nebraska. It was designed to allow students to experience a variety of technologies and provide the public with opportunities for exposure to the implementation of an alternative energy installation designed for an urban setting. The project integrates products from 5 panel manufacturers (including monocrystalline, polycrystalline and thin film technologies) mounted on both fixed and tracking structures. The facility uses both micro and high power inverters. The majority of the system was constructed to serve as an outdoor classroom where panels can be monitored, tested, removed and replaced by students. As an educational facility it primarily serves students in the Creighton University and Metropolitan Community College, but it also provides broader educational opportunities. The project includes a real-time dashboard and a historical database of the output of individual inverters and the corresponding meteorological data for researcher and student use. This allows the evaluation of both panel types and the feasibility of installation types in a region of the country subject to significant temperature, wind and precipitation variation.

U.S. electric power sector transitions required to achieve 80% reductions in economy-wide greenhouse gas emissions: Results based on a state-level model of the U.S. energy system

Energy Technology Data Exchange (ETDEWEB)

Iyer, Gokul C.; Clarke, Leon E.; Edmonds, James A.; Kyle, Gordon P.; Ledna, Catherine M.; McJeon, Haewon C.; Wise, M. A.

2017-05-01

The United States has articulated a deep decarbonization strategy for achieving a reduction in economy-wide greenhouse gas (GHG) emissions of 80% below 2005 levels by 2050. Achieving such deep emissions reductions will entail a major transformation of the energy system and of the electric power sector in particular. , This study uses a detailed state-level model of the U.S. energy system embedded within a global integrated assessment model (GCAM-USA) to demonstrate pathways for the evolution of the U.S. electric power sector that achieve 80% economy-wide reductions in GHG emissions by 2050. The pathways presented in this report are based on feedback received during a workshop of experts organized by the U.S. Department of Energy’s Office of Energy Policy and Systems Analysis. Our analysis demonstrates that achieving deep decarbonization by 2050 will require substantial decarbonization of the electric power sector resulting in an increase in the deployment of zero-carbon and low-carbon technologies such as renewables and carbon capture utilization and storage. The present results also show that the degree to which the electric power sector will need to decarbonize and low-carbon technologies will need to deploy depends on the nature of technological advances in the energy sector, the ability of end-use sectors to electrify and level of electricity demand.

Excited baryon form-factors at high momentum transfer at CEBAF at higher energies

Energy Technology Data Exchange (ETDEWEB)

Stoler, P. [Rensselaer Polytechnic Inst., Troy, NY (United States)

1994-04-01

The possibilities of measuring the properties of excited nucleons at high Q{sup 2} by means of exclusive single meson production at CEBAF with an electron energy of 8 GeV is considered. The motivation is to access short range phenomena in baryon structure, and to investigate the transition from the low Q{sup 2} non-perturbative QCD regime, where constituent quark models are valid, to higher Q{sup 2} where it is believed perturbative QCD plays an increasingly important role. It is found that high quality baryon decay angular distributions can be obtained for the most prominent states up to Q{sup 2} {approximately} 12 GeV{sup 2}/c{sup 2} using a set of moderate resolution, large solid angle magnetic spectrometers.

Two-photon or higher-order absorbing optical materials and methods of use

Science.gov (United States)

Marder, Seth (Inventor); Perry, Joseph (Inventor)

2012-01-01

Compositions capable of simultaneous two-photon absorption and higher order absorptivities are provided. Compounds having a donor-pi-donor or acceptor-pi-acceptor structure are of particular interest, where the donor is an electron donating group, acceptor is an electron accepting group, and pi is a pi bridge linking the donor and/or acceptor groups. The pi bridge may additionally be substituted with electron donating or withdrawing groups to alter the absorptive wavelength of the structure. Also disclosed are methods of generating an excited state of such compounds through optical stimulation with light using simultaneous absorption of photons of energies individually insufficient to achieve an excited state of the compound, but capable of doing so upon simultaneous absorption of two or more such photons. Applications employing such methods are also provided, including controlled polymerization achieved through focusing of the light source(s) used.

Higher Daily Energy Expenditure and Respiratory Quotient, Rather Than Fat-Free Mass, Independently Determine Greater ad Libitum Overeating.

Science.gov (United States)

Piaggi, Paolo; Thearle, Marie S; Krakoff, Jonathan; Votruba, Susanne B

2015-08-01

Body fat-free mass (FFM), energy expenditure (EE), and respiratory quotient (RQ) are known predictors of daily food intake. Because FFM largely determines EE, it is unclear whether body composition per se or the underlying metabolism drives dietary intake. The objective of the study was to test whether 24-hour measures of EE and RQ and their components influence ad libitum food intake independently of FFM. One hundred seven healthy individuals (62 males/45 females, 84 Native Americans/23 whites; age 33 ± 8 y; body mass index 33 ± 8 kg/m(2); body fat 31% ± 8%) had 24-hour measures of EE in a whole-room indirect calorimeter during energy balance, followed by 3 days of ad libitum food intake using computerized vending machine systems. Body composition was estimated by dual-energy x-ray absorptiometry. FFM, 24-hour EE, RQ, spontaneous physical activity, sleeping EE (sleeping metabolic rate), awake and fed thermogenesis, and ad libitum food intake (INTAKE) were measured. Higher 24-hour RQ (P FFM (P = .65), were independent predictors of INTAKE. Mediation analysis demonstrated that 24-hour EE is responsible for 80% of the FFM effect on INTAKE (44.5 ± 16.9 kcal ingested per kilogram of FFM, P= .01), whereas the unique effect due to solely FFM was negligible (10.6 ± 23.2, P = .65). Spontaneous physical activity (r = 0.33, P = .001), but not sleeping metabolic rate (P = .71), positively predicted INTAKE, whereas higher awake and fed thermogenesis determined greater INTAKE only in subjects with a body mass index of 29 kg/m(2) or less (r = 0.44, P = .01). EE and RQ, rather than FFM, independently determine INTAKE, suggesting that competitive energy-sensing mechanisms driven by the preferential macronutrient oxidation and total energy demands may regulate food intake.

Operational overhead of moving to higher energies

CERN Document Server

Lamont, M

2011-01-01

The operational overheads of moving above 3.5 TeV are examined. The costs of performing such a move at the start, or during, the 2011 run are evaluated. The impact of operation with beams above 3.5 TeV on machine protection systems is briefly reviewed, and any potential limitations are enumerated. Finally the possible benefits of increasing the beam energy on the luminosity are discussed.

Study strategies and beliefs about learning as a function of academic achievement and achievement goals.

Science.gov (United States)

Geller, Jason; Toftness, Alexander R; Armstrong, Patrick I; Carpenter, Shana K; Manz, Carly L; Coffman, Clark R; Lamm, Monica H

2018-05-01

Prior research by Hartwig and Dunlosky [(2012). Study strategies of college students: Are self-testing and scheduling related to achievement? Psychonomic Bulletin & Review, 19(1), 126-134] has demonstrated that beliefs about learning and study strategies endorsed by students are related to academic achievement: higher performing students tend to choose more effective study strategies and are more aware of the benefits of self-testing. We examined whether students' achievement goals, independent of academic achievement, predicted beliefs about learning and endorsement of study strategies. We administered Hartwig and Dunlosky's survey, along with the Achievement Goals Questionnaire [Elliot, A. J., & McGregor, H. A. (2001). A 2 × 2 achievement goal framework. Journal of Personality & Social Psychology, 80, 501-519] to a large undergraduate biology course. Similar to results by Hartwig and Dunlosky, we found that high-performing students (relative to low-performing students) were more likely to endorse self-testing, less likely to cram, and more likely to plan a study schedule ahead of time. Independent of achievement, however, achievement goals were stronger predictors of certain study behaviours. In particular, avoidance goals (e.g., fear of failure) coincided with increased use of cramming and the tendency to be driven by impending deadlines. Results suggest that individual differences in student achievement, as well as the underlying reasons for achievement, are important predictors of students' approaches to studying.

“Achieving Regional Energy Efficiency Potential in the Northeast”

Energy Technology Data Exchange (ETDEWEB)

De Angelo, Laura

2018-05-01

With this grant, NEEP sought to accelerate the adoption of energy efficiency in the Northeast and Mid-Atlantic region through regional partnership projects that bring together leadership and staff from state and local government, utilities, industry, environmental and consumer groups, and other related interests to make efficiency visible and understood, reduce energy use in buildings, speed the adoption of high efficiency products, and advance knowledge and best practices. At the time of this grant, the NEEP region included the states of Maine, New Hampshire, Vermont, Massachusetts, New York, Connecticut, Rhode Island, Washington DC, Pennsylvania, Delaware, New Jersey, and Maryland.

Optical spectroscopy and imaging of the higher energy excitons and bandgap of monolayer MoS2

Science.gov (United States)

Borys, Nicholas; Bao, Wei; Barnard, Edward; Ko, Changhyun; Tongay, Sefaatin; Wu, Junqiao; Yang, Li; Schuck, P. James

Monolayer MoS2 (ML-MoS2) exhibits a rich manifold of excitons that dictate optoelectronic performance and functionality. Disentangling these states, which include the quasi-particle bandgap, is critical for developing 2D optoelectronic devices that operate beyond the optical bandgap. Whereas photoluminescence (PL) spectroscopy only probes the lowest-energy radiative state and absorption spectroscopy fails to discriminate energetically degenerate states, photoluminescence excitation (PLE) spectroscopy selectively probes only the excited states that thermalize to the emissive ground state exciton. Using PLE spectroscopy of ML-MoS2, we identify the Rydberg series of the exciton A and exciton B states as well as signatures of the quasi-particle bandgap and coupling between the indirect C exciton and the lowest-energy A exciton, which have eluded previous PLE studies. The assignment of these states is confirmed with density functional theory. Mapping the PLE spectrum reveals spatial variations of the higher-energy exciton manifold and quasi-particle bandgap which mirror the heterogeneity in the PL but also indicate variations in local exciton thermalization processes and chemical potentials.

Self-Directed Weight Loss Strategies: Energy Expenditure Due to Physical Activity Is Not Increased to Achieve Intended Weight Loss.

Science.gov (United States)

Elbelt, Ulf; Schuetz, Tatjana; Knoll, Nina; Burkert, Silke

2015-07-16

Reduced physical activity and almost unlimited availability of food are major contributors to the development of obesity. With the decline of strenuous work, energy expenditure due to spontaneous physical activity has attracted increasing attention. Our aim was to assess changes in energy expenditure, physical activity patterns and nutritional habits in obese subjects aiming at self-directed weight loss. Energy expenditure and physical activity patterns were measured with a portable armband device. Nutritional habits were assessed with a food frequency questionnaire. Data on weight development, energy expenditure, physical activity patterns and nutritional habits were obtained for 105 patients over a six-month period from an initial cohort of 160 outpatients aiming at weight loss. Mean weight loss was -1.5 ± 7.0 kg (p = 0.028). Patients with weight maintenance (n = 75), with substantial weight loss (>5% body weight, n = 20) and with substantial weight gain (>5% body weight, n = 10) did not differ in regard to changes of body weight adjusted energy expenditure components (total energy expenditure: -0.2 kcal/kg/day; non-exercise activity thermogenesis: -0.3 kcal/kg/day; exercise-related activity thermogenesis (EAT): -0.2 kcal/kg/day) or patterns of physical activity (duration of EAT: -2 min/day; steps/day: -156; metabolic equivalent unchanged) measured objectively with a portable armband device. Self-reported consumption frequency of unfavorable food decreased significantly (p = 0.019) over the six-month period. An increase in energy expenditure or changes of physical activity patterns (objectively assessed with a portable armband device) are not employed by obese subjects to achieve self-directed weight loss. However, modified nutritional habits could be detected with the use of a food frequency questionnaire.

Quantum Gravity phenomenology: achievements and challenges

International Nuclear Information System (INIS)

Liberati, S; Maccione, L

2011-01-01

Motivated by scenarios of quantum gravity, Planck-suppressed deviations from Lorentz invariance are expected at observable energies. Ultra-High-Energy Cosmic Rays, the most energetic particles ever observed in nature, yielded in the last two years strong constraints on deviations suppressed by O(E 2 /M 2 Pl ) and also, for the first time, on space-time foam, stringy inspired models of quantum gravity. We review the most important achievements and discuss future outlooks.

Towards higher intensities

CERN Multimedia

CERN Bulletin

2010-01-01

Over the past 2 weeks, commissioning of the machine protection system has advanced significantly, opening up the possibility of higher intensity collisions at 3.5 TeV. The intensity has been increased from 2 bunches of 1010 protons to 6 bunches of 2x1010 protons. Luminosities of 6x1028 cm-2s-1 have been achieved at the start of fills, a factor of 60 higher than those provided for the first collisions on 30 March.   The recent increase in LHC luminosity as recorded by the experiments. (Graph courtesy of the experiments and M. Ferro-Luzzi) To increase the luminosity further, the commissioning crews are now trying to push up the intensity of the individual proton bunches. After the successful injection of nominal intensity bunches containing 1.1x1011 protons, collisions were subsequently achieved at 450 GeV with these intensities. However, half-way through the first ramping of these nominal intensity bunches to 3.5 TeV on 15 May, a beam instability was observed, leading to partial beam loss...

Energy Management Action Network (EMAK). A scoping study investigating the establishment and support of an international and domestic action network of energy management in industry. Information paper

Energy Technology Data Exchange (ETDEWEB)

Jollands, Nigel; Tanaka, Kanako; Gasc, Emilien

2009-12-15

The IEA has identified energy efficiency as essential to achieving a sustainable energy future. In order to improve energy efficiency in industry one of the priority areas for further action is the promotion of more and higher quality energy management (EM) activity. However, there are significant gaps in the current implementation of EM. One method of bridging these gaps would be the creation of an EM Action NetworK (EMAK) to bring practical support to energy managers, connect energy managers to energy policy makers, and interconnect these networks globally. The paper describes possible aims, activities, scope, structure, timelines and approaches related to EMAK and looks at specific tasks that would be important in the set-up and implementation.

Renewable energy

International Nuclear Information System (INIS)

Berghmans, J.

1994-01-01

Renewable energy sources have a small environmental impact and can be easily integrated within existing structures. Moreover, the use of renewable energy sources can contribute to achieve a zero emission of carbon dioxide by 2100, provided an efficient environmental policy during the next 40 years. This includes a correct pricing policy of renewable energy sources with respect to nuclear energy and fossil fuel. The latter energy sources have been favoured in the past. In addition, an open market policy, the restructuring or conversion of existing international energy institutes, and international treaties for the protection of the natural environment are needed in view of achieving the zero carbon dioxide emission objective. (A.S.)

Energy Storage Requirements for Achieving 50% Solar Photovoltaic Energy Penetration in California

Energy Technology Data Exchange (ETDEWEB)

Denholm, Paul; Margolis, Robert

2016-08-01

We estimate the storage required to enable PV penetration up to 50% in California (with renewable penetration over 66%), and we quantify the complex relationships among storage, PV penetration, grid flexibility, and PV costs due to increased curtailment. We find that the storage needed depends strongly on the amount of other flexibility resources deployed. With very low-cost PV (three cents per kilowatt-hour) and a highly flexible electric power system, about 19 gigawatts of energy storage could enable 50% PV penetration with a marginal net PV levelized cost of energy (LCOE) comparable to the variable costs of future combined-cycle gas generators under carbon constraints. This system requires extensive use of flexible generation, transmission, demand response, and electrifying one quarter of the vehicle fleet in California with largely optimized charging. A less flexible system, or more expensive PV would require significantly greater amounts of storage. The amount of storage needed to support very large amounts of PV might fit within a least-cost framework driven by declining storage costs and reduced storage-duration needs due to high PV penetration.

Future of nuclear energy is promising

International Nuclear Information System (INIS)

Stritar, A.

1999-01-01

Paper is trying to clearly present the facts about World nuclear energy production in the past and in the future. The production has increased in last ten years for about 26% and will continue to grow. After next ten years we can expect between 12,5% and 25% higher production than this year. Therefore we, nuclear professionals, should not be pessimistic. We should strive not to use negative words in our communications between ourselves and especially to general public. Instead, we should proudly underline our achievements in the past and prospects for the future stressing all the benefits of this type of energy production.(author)

Design of Energy Aware Adder Circuits Considering Random Intra-Die Process Variations

Directory of Open Access Journals (Sweden)

Marco Lanuzza

2011-04-01

Full Text Available Energy consumption is one of the main barriers to current high-performance designs. Moreover, the increased variability experienced in advanced process technologies implies further timing yield concerns and therefore intensifies this obstacle. Thus, proper techniques to achieve robust designs are a critical requirement for integrated circuit success. In this paper, the influence of intra-die random process variations is analyzed considering the particular case of the design of energy aware adder circuits. Five well known adder circuits were designed exploiting an industrial 45 nm static complementary metal-oxide semiconductor (CMOS standard cell library. The designed adders were comparatively evaluated under different energy constraints. As a main result, the performed analysis demonstrates that, for a given energy budget, simpler circuits (which are conventionally identified as low-energy slow architectures operating at higher power supply voltages can achieve a timing yield significantly better than more complex faster adders when used in low-power design with supply voltages lower than nominal.

Vibration energy harvesting using the Halbach array

International Nuclear Information System (INIS)

Zhu, Dibin; Beeby, Steve; Tudor, John; Harris, Nick

2012-01-01

This paper studies the feasibility of vibration energy harvesting using a Halbach array. A Halbach array is a specific arrangement of permanent magnets that concentrates the magnetic field on one side of the array while cancelling the field to almost zero on the other side. This arrangement can improve electromagnetic coupling in a limited space. The Halbach array offers an advantage over conventional layouts of magnets in terms of its concentrated magnetic field and low-profile structure, which helps improve the output power of electromagnetic energy harvesters while minimizing their size. Another benefit of the Halbach array is that due to the existence of an almost-zero magnetic field zone, electronic components can be placed close to the energy harvester without any chance of interference, which can potentially reduce the overall size of a self-powered device. The first reported example of a low-profile, planar electromagnetic vibration energy harvester utilizing a Halbach array was built and tested. Results were compared to ones for energy harvesters with conventional magnet layouts. By comparison, it is concluded that although energy harvesters with a Halbach array can have higher magnetic field density, a higher output power requires careful design in order to achieve the maximum magnetic flux gradient. (paper)

Energy and the World Summit on Sustainable Development: what next?

International Nuclear Information System (INIS)

Spalding-Fecher, Randall; Winkler, Harald; Mwakasonda, Stanford

2005-01-01

Given the importance of energy issues to sustainable development, energy was a priority issue at the World Summit on Sustainable Development in August 2002. The objective of this paper is to examine the outcomes of the Summit on energy, and to assess them against proposals to address the lack of access to modern energy and the need to move toward a cleaner energy system. We find that lack of political leadership from key countries prevented agreement not only on targets for renewable energy, but also on a programme to promote access. The achievements of the Summit were limited to enabling activities such as capacity building and technology transfer, rather than substantive agreements. While WSSD put energy higher on the agenda than before, no institutional home or programme to take the issues forward has emerged. This therefore remains a critical challenge to be addressed. Achieving this broad goal will require building a coalition to promote cleaner energy, and committing resources to programme for energy access. Based on analysis of proposals and the negotiations, we propose several key areas where progress is still possible and necessary, including: shifting more international public and private energy financing toward access investments and cleaner energy investments, advancing regional approaches to access and renewable energy targets, and a range of mechanisms to strengthen institutional capacity for integrating energy and sustainable development

On the Delay-Energy Tradeoff in Multiuser Fading Channels

Directory of Open Access Journals (Sweden)

Ralf R. Müller

2009-01-01

Full Text Available We consider the delay-energy tradeoff on a fading channel with multiuser diversity. For fixed arbitrary rates of the users, the total transmitted energy is minimized subject to a delay constraint. To achieve this goal we propose a scheme which schedules a subset of all users simultaneously. The scheduled users are allocated power to guarantee successful separation at the detector by successive decoding. In this way, we can benefit from both multiuser diversity and the near-far situation via scheduling and simultaneous transmission, respectively. We analytically show that when the number of users goes to infinity the energy required to guarantee the required user rates can be made as small as required at the cost of a higher delay “delay-energy tradeoff”. We explicitly compute the delay under the proposed scheduling policy and discuss how delay differentiation can be achieved. We extend the results to multiband multiaccess channel. Finally, all the results can be generalized in a straightforward fashion to broadcast channel due to the Gaussian multiaccess-broadcast channel duality.

Energy efficiency, a new area of state supervision?; Energieeffizienz - eine neue Aufgabe fuer staatliche Regulierung?

Energy Technology Data Exchange (ETDEWEB)

Mennel, Tim; Sturm, Bodo

2008-01-15

The demand for higher energy efficiency as a rule is based on concrete goals of energy policy and environmental policy, e.g. climate protection, reliability of supply, and protection of resources. The publication analyzes these arguments and discusses possible political instrument to achieve this goal. It is found that any rational economic policy should make use of cost-efficient, specific instruments in case of energy-relevant market failure and problems of intergenerational justice. This includes informatory measures, CO2 certificates, and specific energy taxes. Higher energy efficiency is the result of a rational policy of this kind, not a means to an end. On the other hand, instruments of a more general nature that directly specify energy conservation goals, e.g. white certificates and enforced standards, are not to be recommended. (orig.)

Adolescent consumption of sports and energy drinks: linkages to higher physical activity, unhealthy beverage patterns, cigarette smoking, and screen media use.

Science.gov (United States)

Larson, Nicole; Dewolfe, Jessica; Story, Mary; Neumark-Sztainer, Dianne

2014-01-01

To examine patterns of adolescent sports and energy drink (SED) consumption and identify behavioral correlates. Data were drawn from Eating and Activity in Teens, a population-based study. Adolescents from 20 middle and high schools in Minneapolis/St Paul, MN completed classroom-administered surveys. A total of 2,793 adolescents (53.2% girls) in grades 6-12. Beverage patterns; breakfast frequency; moderate to vigorous physical activity (MVPA); media use; sleep; and cigarette smoking. Linear and logistic regression models were used to estimate associations between health behaviors and SED consumption, adjusting for demographics. Over a third of adolescents consumed sports drinks and 14.7% consumed energy drinks at least once a week. Among boys and girls, both sports and energy drink consumption were related to higher video game use; sugar-sweetened beverage and fruit juice intake; and smoking (P Sports drink consumption was also significantly related to higher MVPA and organized sport participation for both genders (P sports drink consumption was associated with higher MVPA, adolescents should be reminded of recommendations to consume these beverages only after vigorous, prolonged activity. There is also a need for future interventions designed to reduce SED consumption, to address the clustering of unhealthy behaviors. Copyright © 2014 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Vietnam's energy sector: A review of current energy policies and strategies

International Nuclear Information System (INIS)

Tien Minh Do; Sharma, Deepak

2011-01-01

Since the introduction of market-oriented economy in 1986, Vietnam has made noticeable socio-economic progress. In this progress, the energy sector has played a vital role. This role is likely to deepen in the years to come as Vietnam strives to achieve even higher levels in economic progress. Such deepening in the role of energy, this paper argues, will heighten concerns about the security of energy supply, and economic, environmental, social and political consequences. In order to address these issues, Vietnam has over the last decade, developed a suite of energy policies. A deeper review of these policies suggests that they are typified by economic-growth orientation, exclusive focus on a single-sector or single issue, and largely neglect the significance of cross-sectoral and cross-thematic issues arising from the interdependencies between energy, economy, and the polity at large. The existing energy policy settings are, therefore, unlikely to be able to provide a satisfactory redress to the challenges noted above. This paper provides an overview of the current energy policies with a view to identify areas where further policy effort is needed in order to facilitate a sustainable development of the Vietnamese energy sector. - Highlights: → Identifying challenges faced by the Vietnamese energy sector. → Analyzing limitations of the existing energy policy settings (policies, strategies and institutions) in addressing these challenges. → Developing recommendations on improving the existing energy policy settings to provide a satisfactory redress for the challenges noted above.

Nuclear energy acceptance and potential role to meet future energy demand. Which technical/scientific achievements are needed?

Science.gov (United States)

Schenkel, Roland

2012-06-01

recently been proposed for energy production, is critically reviewed. There are major challenges remaining that are shortly outlined. Scientific/technical achievements that are required in the light of the Fukushima accident are highlighted.

Nuclear energy acceptance and potential role to meet future energy demand. Which technical/scientific achievements are needed?

Energy Technology Data Exchange (ETDEWEB)

Schenkel, Roland [European Commission, Joint Research Centre, Institute for Transuranium Elements, Hermann-von-Helmholtz-Platz 1,76344 Eggenstein-Leopoldshafen (Germany)

2012-06-19

have recently been proposed for energy production, is critically reviewed. There are major challenges remaining that are shortly outlined. Scientific/technical achievements that are required in the light of the Fukushima accident are highlighted.

Fast Atomic-Scale Elemental Mapping of Crystalline Materials by STEM Energy-Dispersive X-Ray Spectroscopy Achieved with Thin Specimens.

Science.gov (United States)

Lu, Ping; Yuan, Renliang; Zuo, Jian Min

2017-02-01

Elemental mapping at the atomic-scale by scanning transmission electron microscopy (STEM) using energy-dispersive X-ray spectroscopy (EDS) provides a powerful real-space approach to chemical characterization of crystal structures. However, applications of this powerful technique have been limited by inefficient X-ray emission and collection, which require long acquisition times. Recently, using a lattice-vector translation method, we have shown that rapid atomic-scale elemental mapping using STEM-EDS can be achieved. This method provides atomic-scale elemental maps averaged over crystal areas of ~few 10 nm2 with the acquisition time of ~2 s or less. Here we report the details of this method, and, in particular, investigate the experimental conditions necessary for achieving it. It shows, that in addition to usual conditions required for atomic-scale imaging, a thin specimen is essential for the technique to be successful. Phenomenological modeling shows that the localization of X-ray signals to atomic columns is a key reason. The effect of specimen thickness on the signal delocalization is studied by multislice image simulations. The results show that the X-ray localization can be achieved by choosing a thin specimen, and the thickness of less than about 22 nm is preferred for SrTiO3 in [001] projection for 200 keV electrons.

EU Energy Strategy and The Role of Fission Energy

International Nuclear Information System (INIS)

Knapp, V.

2008-01-01

European Council in its conclusions of 8/9 March 2007 endorsed conditionally as EU objective a 30 percent reduction of GHG emission by 2020 compared to 1990 with a firm commitment to achieve at least 20 percent reduction. Further commitments are reduction of energy consumption by 20 percent compared with projections for 2020 and a 20 percent share of renewable energy sources in overall energy consumption in 2020. Assuming that the reduction of energy consumption by 20 percent relative to projections for 2020, is achieved, as well as increase of renewable in total energy consumption from 4.4 percent share in 1990 to 20 percent in 2020, and provided that nuclear contribution is not reduced, then the CO 2 emission reduction target of 20 percent by 2020 relative to 1990 could be attained. However, both these commitments on consumption decrease and share of renewable in 2007 EC conclusions are in comparison with the 2006 Green Paper so ambitious that reserve measures should be considered. The 2006 Green Paper projected an increase of a share of renewable in total energy production to 12.2 percent by 2030. According to IEA World Energy Outlook 2004 projections, used in Green Paper, wind power would in 2030 contribute with 11 percent in electricity production, on the level of 480 TWh. This projection would require installed wind power of 170 to 180 GW. With new, considerably higher target for renewable by 2020 and limited scope for hydro and solar power increase, wind power would probably have to be increased by at least 50 percent, to about 250-270 GW, to bring renewable share to the 20 percent in overall energy consumption. At present installed wind power in EC amounts to about 50 GW, so to reach a 20 percent target for renewable by 2020 over 200 GW of new wind power would have to be built in not much more than 10 years, unless some spectacular advance with solar energy. Assuming that mass installations start by 2010 the required annual construction would be about 20 GW

Maryland Higher Education Commission Data Book 2016. Creating a State of Achievement

Science.gov (United States)

Maryland Higher Education Commission, 2016

2016-01-01

This document presents statistics about higher education in Maryland for 2016. The tables in this document are presented according to the following categories: (1) Students; (2) Retention and Graduation; (3) Degrees; (4) Faculty; (5) Revenues & Expenditures; (6) Tuition and Fees; (7) Financial Aid, and (8) Private Career Schools. [For…

Quantum gravity phenomenology. Achievements and challenges

Energy Technology Data Exchange (ETDEWEB)

Liberati, S. [International School for Advanced Study (SISSA), Trieste (Italy); INFN, Sezione di Trieste (Italy); Maccione, L. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2011-05-15

Motivated by scenarios of quantum gravity, Planck-suppressed deviations from Lorentz invariance are expected at observable energies. Ultra-High-Energy Cosmic Rays, the most energetic particles ever observed in nature, yielded in the last two years strong constraints on deviations suppressed by O(E{sup 2}/M{sup 2}{sub Pl}) and also, for the first time, on space-time foam, stringy inspired models of quantum gravity. We review the most important achievements and discuss future outlooks. (orig.)

Feasibility of Achieving a Zero-Net-Energy, Zero-Net-Cost Homes

Energy Technology Data Exchange (ETDEWEB)

Al-Beaini, S.; Borgeson, S.; Coffery, B.; Gregory, D.; Konis, K.; Scown, C.; Simjanovic, J.; Stanley, J.; Strogen, B.; Walker, I.

2009-09-01

A green building competition, to be known as the Energy Free Home Challenge (EFHC), is scheduled to be opened to teams around the world in 2010. This competition will encourage both design innovation and cost reduction, by requiring design entries to meet 'zero net energy' and 'zero net cost' criteria. For the purposes of this competition, a 'zero net energy' home produces at least as much energy as it purchases over the course of a year, regardless of the time and form of the energy (e.g., electricity, heat, or fuel) consumed or produced. A 'zero net cost' home is no more expensive than a traditional home of comparable size and comfort, when evaluated over the course of a 30-year mortgage. In other words, the 'green premium' must have a payback period less than 30 years, based on the value of energy saved. The overarching goal of the competition is to develop affordable, high-performance homes that can be mass-produced at a large scale, and are able to meet occupant needs in harsh climates (as can be found where the competition will be held in Illinois). This report outlines the goals of the competition, and gauges their feasibility using both modeling results and published data. To ensure that the established rules are challenging, yet reasonable, this report seeks to refine the competition goals after exploring their feasibility through case studies, cost projections, and energy modeling. The authors of this report conducted a survey of the most progressive home energy-efficiency practices expected to appear in competition design submittals. In Appendix A, a summary can be found of recent projects throughout the United States, Canada, Germany, Switzerland, Sweden and Japan, where some of the most progressive technologies have been implemented. As with past energy efficient home projects, EFHC competitors will incorporate a multitude of energy efficiency measures into their home designs. The authors believe that

Land use implications of future energy system trajectories—The case of the UK 2050 Carbon Plan

International Nuclear Information System (INIS)

Konadu, D. Dennis; Mourão, Zenaida Sobral; Allwood, Julian M.; Richards, Keith S.; Kopec, Grant; McMahon, Richard; Fenner, Richard

2015-01-01

The UK's 2008 Climate Change Act sets a legally binding target for reducing territorial greenhouse gas emissions by 80% by 2050, relative to 1990 levels. Four pathways to achieve this target have been developed by the Department of Energy and Climate Change, with all pathways requiring increased us of bioenergy. A significant amount of this could be indigenously sourced from crops, but will increased domestic production of energy crops conflict with other agricultural priorities? To address this question, a coupled analysis of the UK energy system and land use has been developed. The two systems are connected by the production of bioenergy, and are projected forwards in time under the energy pathways, accounting for various constraints on land use for agriculture and ecosystem services. The results show different combinations of crop yield and compositions for the pathways lead to the appropriation of between 7% and 61% of UK's agricultural land for bioenergy production. This could result in competition for land for food production and other land uses, as well as indirect land use change in other countries due to an increase in bioenergy imports. Consequently, the potential role of bioenergy in achieving UK emissions reduction targets may face significant deployment challenges. - Highlights: • The Carbon Plan could result in significant land use change for bioenergy by 2050. • Higher Nuclear; less efficiency pathway has the highest land use change impact. • Higher Renewables; more energy efficiency pathway has the lowest land use change impact. • Transport decarbonisation via biofuels has the highest land use change impacts. • At current deployment rate only Higher Renewables pathway projections is achievable.

The Effects of Higher Education/Military Service on Achievement Levels of Police Academy Cadets.

Science.gov (United States)

Johnson, Thomas Allen

This study compared levels of achievement of three groups of Houston (Texas) police academy cadets: those with no military service but with 60 or more college credit hours, those with military service and 0 hours of college credit, and those with military service and 1 to 59 hours of college credit. Prior to 1991, police cadets in Houston were…

Maryland Higher Education Commission Data Book 2015. Creating a State of Achievement

Science.gov (United States)

Maryland Higher Education Commission, 2015

2015-01-01

This document presents statistics about higher education in Maryland for 2015. The tables in this document are presented according to the following categories: (1) Students; (2) Retention and Graduation; (3) Degrees; (4) Faculty; (5) Revenues & Expenditures; (6) Tuition and Fees; (7) Financial Aid, (8) Private Career Schools, and (9) Distance…

Maryland Higher Education Commission Data Book 2014. Creating a State of Achievement

Science.gov (United States)

Maryland Higher Education Commission, 2014

2014-01-01

This document presents statistics about higher education in Maryland for 2014. The tables in this document are presented according to the following categories: (1) Students; (2) Retention and Graduation; (3) Degrees; (4) Faculty; (5) Revenues & Expenditures; (6) Tuition and Fees; (7) Financial Aid, (8) Private Career Schools, and (9) Distance…

Faster eating rates are associated with higher energy intakes during an ad libitum meal, higher BMI and greater adiposity among 4·5-year-old children: results from the Growing Up in Singapore Towards Healthy Outcomes (GUSTO) cohort.

Science.gov (United States)

Fogel, Anna; Goh, Ai Ting; Fries, Lisa R; Sadananthan, Suresh A; Velan, S Sendhil; Michael, Navin; Tint, Mya-Thway; Fortier, Marielle V; Chan, Mei Jun; Toh, Jia Ying; Chong, Yap-Seng; Tan, Kok Hian; Yap, Fabian; Shek, Lynette P; Meaney, Michael J; Broekman, Birit F P; Lee, Yung Seng; Godfrey, Keith M; Chong, Mary F F; Forde, Ciarán G

2017-04-01

Faster eating rates are associated with increased energy intake, but little is known about the relationship between children's eating rate, food intake and adiposity. We examined whether children who eat faster consume more energy and whether this is associated with higher weight status and adiposity. We hypothesised that eating rate mediates the relationship between child weight and ad libitum energy intake. Children (n 386) from the Growing Up in Singapore Towards Healthy Outcomes cohort participated in a video-recorded ad libitum lunch at 4·5 years to measure acute energy intake. Videos were coded for three eating-behaviours (bites, chews and swallows) to derive a measure of eating rate (g/min). BMI and anthropometric indices of adiposity were measured. A subset of children underwent MRI scanning (n 153) to measure abdominal subcutaneous and visceral adiposity. Children above/below the median eating rate were categorised as slower and faster eaters, and compared across body composition measures. There was a strong positive relationship between eating rate and energy intake (r 0·61, P<0·001) and a positive linear relationship between eating rate and children's BMI status. Faster eaters consumed 75 % more energy content than slower eating children (Δ548 kJ (Δ131 kcal); 95 % CI 107·6, 154·4, P<0·001), and had higher whole-body (P<0·05) and subcutaneous abdominal adiposity (Δ118·3 cc; 95 % CI 24·0, 212·7, P=0·014). Mediation analysis showed that eating rate mediates the link between child weight and energy intake during a meal (b 13·59; 95 % CI 7·48, 21·83). Children who ate faster had higher energy intake, and this was associated with increased BMI z-score and adiposity.

Self-Directed Weight Loss Strategies: Energy Expenditure Due to Physical Activity Is Not Increased to Achieve Intended Weight Loss

Directory of Open Access Journals (Sweden)

Ulf Elbelt

2015-07-01

Full Text Available Reduced physical activity and almost unlimited availability of food are major contributors to the development of obesity. With the decline of strenuous work, energy expenditure due to spontaneous physical activity has attracted increasing attention. Our aim was to assess changes in energy expenditure, physical activity patterns and nutritional habits in obese subjects aiming at self-directed weight loss. Methods: Energy expenditure and physical activity patterns were measured with a portable armband device. Nutritional habits were assessed with a food frequency questionnaire. Results: Data on weight development, energy expenditure, physical activity patterns and nutritional habits were obtained for 105 patients over a six-month period from an initial cohort of 160 outpatients aiming at weight loss. Mean weight loss was −1.5 ± 7.0 kg (p = 0.028. Patients with weight maintenance (n = 75, with substantial weight loss (>5% body weight, n = 20 and with substantial weight gain (>5% body weight, n = 10 did not differ in regard to changes of body weight adjusted energy expenditure components (total energy expenditure: −0.2 kcal/kg/day; non-exercise activity thermogenesis: −0.3 kcal/kg/day; exercise-related activity thermogenesis (EAT: −0.2 kcal/kg/day or patterns of physical activity (duration of EAT: −2 min/day; steps/day: −156; metabolic equivalent unchanged measured objectively with a portable armband device. Self-reported consumption frequency of unfavorable food decreased significantly (p = 0.019 over the six-month period. Conclusions: An increase in energy expenditure or changes of physical activity patterns (objectively assessed with a portable armband device are not employed by obese subjects to achieve self-directed weight loss. However, modified nutritional habits could be detected with the use of a food frequency questionnaire.

Distributed energy store railguns experiment and analysis

International Nuclear Information System (INIS)

Holland, L.D.

1984-01-01

Electromagnetic acceleration of projectiles holds the potential for achieving higher velocities than yet achieved by any other means. A railgun is the simplest form of electromagnetic macroparticle accelerator and can generate the highest sustained accelerating force. The practical length of conventional railguns is limited by the impedance of the rails because current must be carried along the entire length of the rails. A railgun and power supply system called the distributed energy store railgun was proposed as a solution to this limitation. The distributed energy store railgun used multiple current sources connected to the rails of a railgun at points distributed along the bore. These current sources (energy stores) are turned on in sequence as the projectile moves down the bore so that current is fed to the railgun from behind the armature. In this system the length of the rails that carry the full armature current is less than the total length of the railgun. If a sufficient number of energy stores is used, this removes the limitation on the length of a railgun. An additional feature of distributed energy store type railguns is that they can be designed to maintain a constant pressure on the projectile being accelerated. A distributed energy store railgun was constructed and successfully operated. In addition to this first demonstration of the distributed energy store railgun principle, a theoretical model of the system was also constructed

Mapping of Ethiopian higher education institutions on clean energy

Energy Technology Data Exchange (ETDEWEB)

2011-04-15

Norad commissioned Econ Poeyry to map teaching and research activities and capacity related to clean energy in selected Ethiopian universities. The mapping identified challenges and opportunities with the aim of facilitating future intervention by the Ethiopian Government and donors to help improve the energy sector development of the country. The report covered the government-owned universities of Bahir Dar, Mekelle, Jimma, Arba Minch and Addis Ababa. The mapping was based on a questionnaire and on interviews at each university. (Author)

Identifying Factors That Affect Higher Educational Achievements of Jamaican Seventh-Day Adventists

Science.gov (United States)

Campbell, Samuel P.

2011-01-01

This mixed-method explanatory research examined factors that influenced Jamaican Seventh-day Adventist (SDA) members to pursue higher education. It sought to investigate whether the source of the motivation is tied to the Church's general philosophy on education or to its overall programs as experienced by the membership at large. The question of…

Ringkøbing-Skjern Energy Atlas for municipal energy planning

DEFF Research Database (Denmark)

Petrovic, Stefan; Karlsson, Kenneth Bernard

2015-01-01

Ringkøbing-Skjern is Denmark's largest municipality, located in the west part of Central Denmark Region. Its medium-term goal is to achieve 100 % self-sufficiency in renewable energy supply by 2020. To achieve this ambitious goal, future courses of action have been outlined in the municipality......'s energy strategy "Energy2020" and divided into five groups: increasing production from wind, bioenergy and other renewable energy sources, reducing heat demand in buildings and converting transportation sector to renewable energy. The analysis of technical, economic and environmental impacts...... of such a variety of technologies on the municipality's energy system requires highly detailed decision support system. For that purpose, GIS-based energy atlas has been developed for Ringkøbing-Skjern municipality. The data about energy supply and demand, transmission and distribution infrastructure, energy...

Achievement report on surveys and researches in the Sunshine Project in fiscal 1980. Surveys and researches on total energy systems; 1980 nendo total energy system ni kansuru chosa kenkyu seika hokokusho yoyaku

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-06-01

Identifying the energy demand system as a total system covering from energy generation to the ultimate utilization, a quantitative and theoretical analysis method was developed in achieving selection and development of long-term strategy of Japan for 50 years from about 1975 to about 2025. Development was made on a supply estimation model by using the system dynamics method, that includes international fluctuation factors in primary energy supply structure and time-based relevant elements. Improvements were made in several occasions on the demand estimation model that includes movements of Japan's industrial structures and nation's needs for living, and fluctuation factors of population configuration. Development and improvement were made on the energy flow model to link the supply side with the demand side and analyze the energy flow. In addition, efforts were made on arranging data for inputting these models (data collection, putting them in order, and processing). These models are now in the phase of practical use, and three models have also been nearly completed. Quantitative analysis will be possible if arranging the input database is continued. (NEDO)

Difficulties in achieving public acceptance of nuclear energy in Poland

International Nuclear Information System (INIS)

Latek, S.

1993-01-01

Both the surveys and other social phenomena (establishment of a Polish Nucleonic Society, change in the tone by the mass media, access to other nations' experience) provide some grounds for a moderately optimistic (for nuclear energy prospect in Poland) conclusion of this paper. Unfortunately, one also has to be aware of hazards to that vision. The continuing economic crisis and the resulting fall in energy demand exerts no pressure on investing in energy. Environmental movements still have a considerable authority among the society. The unstable political situation in this part of Europe aggravated by the lack of sufficient guarantees against uncontrolled use of nuclear weapons also a negative impact on the awareness and attitudes of people. All these matters- signs of hope and difficulties- are great challenges to us. We will seek to meet them

Immediate challenge of combating climate change: Effective implementation of energy efficiency policies

Energy Technology Data Exchange (ETDEWEB)

Morvaj, Zoran; Bukarica, Vesna

2010-09-15

Energy efficiency is the most readily available, rapid and cost-effective way to achieve desired greenhouse gases reductions. Therefore, it is the focus of energy and climate change policies world wide. The results of these policies are still missing in the desired extent, even in the EU, which has the most advanced energy efficiency policy. The main reason behind this policy failure is a complete lack of focus on implementing capacities that would ensure full policy uptake. Embracing full-scale energy management systems in public and business sectors and mobilisation of and cooperation between all stakeholders are the way towards higher efficiency.

Higher Desolvation Energy Reduces Molecular Recognition in Multi-Drug Resistant HIV-1 Protease

Directory of Open Access Journals (Sweden)

Ladislau C. Kovari

2012-05-01

Full Text Available Designing HIV-1 protease inhibitors that overcome drug-resistance is still a challenging task. In this study, four clinical isolates of multi-drug resistant HIV-1 proteases that exhibit resistance to all the US FDA-approved HIV-1 protease inhibitors and also reduce the substrate recognition ability were examined. A multi-drug resistant HIV-1 protease isolate, MDR 769, was co-crystallized with the p2/NC substrate and the mutated CA/p2 substrate, CA/p2 P1’F. Both substrates display different levels of molecular recognition by the wild-type and multi-drug resistant HIV-1 protease. From the crystal structures, only limited differences can be identified between the wild-type and multi-drug resistant protease. Therefore, a wild-type HIV-1 protease and four multi-drug resistant HIV-1 proteases in complex with the two peptides were modeled based on the crystal structures and examined during a 10 ns-molecular dynamics simulation. The simulation results reveal that the multi-drug resistant HIV-1 proteases require higher desolvation energy to form complexes with the peptides. This result suggests that the desolvation of the HIV-1 protease active site is an important step of protease-ligand complex formation as well as drug resistance. Therefore, desolvation energy could be considered as a parameter in the evaluation of future HIV-1 protease inhibitor candidates.

Energy poverty: A special focus on energy poverty in India and renewable energy technologies

Energy Technology Data Exchange (ETDEWEB)

Bhide, Anjali; Monroy, Carlos Rodriguez [Department of Business Administration, School of Industrial Engineering, Technical University of Madrid, Jose Gutierrez Abascal, 2, 28006 Madrid (Spain)

2011-02-15

As a large percentage of the world's poor come from India, development in India is a key issue. After the establishment of how access to energy enhances development and the achievement of the millennium development goals, energy poverty has become a major issue. In India there is a great interest in addressing the subject of energy poverty, in order to reach development goals set by the Government. This will imply an increase in India's energy needs. In a climate of change and environmental consciousness, sustainable alternatives must be considered to address these issues. Renewable energy technologies could provide a solution to this problem. The Government of India has been focussing in implementing electricity policies as well as on promoting renewable energy technologies. The focus of this article is to bring to light the problems faced in India in terms of energy consumption as well as the hindrances faced by renewable-based electrification networks. Government policies aimed at addressing these issues, as well as the current state of renewable energy technologies in India are discussed, so as to analyse the possibility of a solution to the problems of finding a sustainable method to eradicate energy poverty in India. The research reveals that the Government of India has been unable to meet some of its unrealistic development goals, and in order to achieve the remaining goals it will have to take drastic steps. The Government will have to be more aggressive in the promotion of renewable energy technologies in order to achieve sustainable development in India. (author)

Attaining the Photometric Precision Required by Future Dark Energy Projects

Energy Technology Data Exchange (ETDEWEB)

Stubbs, Christopher [Harvard Univ., Cambridge, MA (United States)

2013-01-21

This report outlines our progress towards achieving the high-precision astronomical measurements needed to derive improved constraints on the nature of the Dark Energy. Our approach to obtaining higher precision flux measurements has two basic components: 1) determination of the optical transmission of the atmosphere, and 2) mapping out the instrumental photon sensitivity function vs. wavelength, calibrated by referencing the measurements to the known sensitivity curve of a high precision silicon photodiode, and 3) using the self-consistency of the spectrum of stars to achieve precise color calibrations.

Reputation in Higher Education

DEFF Research Database (Denmark)

Plewa, Carolin; Ho, Joanne; Conduit, Jodie

2016-01-01

Reputation is critical for institutions wishing to attract and retain students in today's competitive higher education setting. Drawing on the resource based view and configuration theory, this research proposes that Higher Education Institutions (HEIs) need to understand not only the impact...... of independent resources but of resource configurations when seeking to achieve a strong, positive reputation. Utilizing fuzzy set qualitative comparative analysis (fsQCA), the paper provides insight into different configurations of resources that HEIs can utilize to build their reputation within their domestic...

A Mixed Transmission Strategy to Achieve Energy Balancing in Wireless Sensor Networks

DEFF Research Database (Denmark)

Liu, Tong; Gu, Tao; Jin, Ning

2017-01-01

In this paper, we investigate the problem of energy balanced data collection in wireless sensor networks, aiming to balance energy consumption among all sensor nodes during the data propagation process. Energy balanced data collection can potentially save energy consumption and prolong network...... lifetime, and hence, it has many practical implications for sensor network design and deployment. The traditional hop-by-hop transmission model allows a sensor node to propagate its packets in a hop-by-hop manner toward the sink, resulting in poor energy balancing for the entire network. To address...... the problem, we apply a slice-based energy model, and divide the problem into inter-slice and intra-slice energy balancing problems. We then propose a probability-based strategy named inter-slice mixed transmission protocol and an intra-slice forwarding technique to address each of the problems. We propose...

Accounting for Energy Cost When Designing Energy-Efficient Wireless Access Networks

Directory of Open Access Journals (Sweden)

Greta Vallero

2018-03-01

Full Text Available Because of the increase of the data traffic demand, wireless access networks, through which users access telecommunication services, have expanded, in terms of size and of capability and, consequently, in terms of power consumption. Therefore, costs to buy the necessary power for the supply of base stations of those networks is becoming very high, impacting the communication cost. In this study, strategies to reduce the amount of money spent for the purchase of the energy consumed by the base stations are proposed for a network powered by solar panels, energy batteries and the power grid. First, the variability of the energy prices is exploited. It provides a cost reduction of up to 30%, when energy is bought in advance. If a part of the base stations is deactivated when the energy price is higher than a given threshold, a compromise between the energy cost and the user coverage drop is needed. In the simulated scenario, the necessary energy cost can be reduced by more than 40%, preserving the user coverage by greater than 94%. Second, the network is introduced to the energy market: it buys and sells energy from/to the traditional power grid. Finally, costs are reduced by the reduction of power consumption of the network, achieved by using microcell base stations. In the considered scenario, up to a 31% cost reduction is obtained, without the deterioration of the quality of service, but a huge Capex expenditure is required.

Higher energy intake at dinner decreases parasympathetic activity during nighttime sleep in menstruating women: A randomized controlled trial.

Science.gov (United States)

Tada, Yuki; Yoshizaki, Takahiro; Tanaka, Izumi; Kanehara, Rieko; Kato, Misao; Hatta, Naoko; Hida, Azumi; Kawano, Yukari

2018-06-09

Previous studies have found more frequent increases in dietary intake and nonrestorative nocturnal sleep during the luteal phase than in the follicular phase, but few studies have investigated how increased energy intake at dinner influences sleep by considering the correlation between female hormone and cardiac autonomic nervous system (ANS) activity. This study examined the effects of energy intake at dinner on ANS activity during nighttime sleep in order to evaluate restorative sleep in healthy women. We also examined whether ANS activity is associated with female hormone dynamics. Twenty-four healthy collegiate women participated in this randomized crossover trial. Each was assigned to receive a High Energy Dinner (HED) or Low Energy Dinner (LED) treatment. Energy ratios of each test meal (breakfast, lunch, and dinner) to total energy intake were 1:1:2 and 1:2:1 for HED and LED treatments, respectively. Each participant wore an ECG recorder before dinner and removed it upon waking the next morning. Power spectral analysis of heart rate variability was used to calculate low frequency (LF), high frequency (HF), and total spectral power (TP). Cardiac sympathetic (SNS) and parasympathetic (PNS) nervous system activity were evaluated as LF/HF and HF/TP, respectively. Mean HF/TP for the entire sleeping period was lower with HED treatment compared to LED treatment (41.7 ± 11.4 vs. 45.0 ± 12.13, P = .034). Intergroup comparisons of the initial 3-h sleeping period revealed that LF/HF (0.87 ± 0.82 vs. 0.66 ± 0.82, P = .013) and HF/TP (45.6 ± 13.9 vs. 51.5 ± 11.8, P = .002) were higher and lower, respectively, with HED treatment compared to LED treatment. Progesterone levels were positively correlated with LF/HF with LED treatment, and negatively correlated with HF/TP with both HED and LED treatments. Higher energy intake at dinner increases and decreases SNS and PNS activities, respectively, resulting in nonrestorative nocturnal

Recent development in thermally activated desalination methods: achieving an energy efficiency less than 2.5 kWhelec/m3

KAUST Repository

Shahzad, Muhammad Wakil

2015-05-19

Water-Energy-Environment nexus is a crucial consideration when designing seawater desalination processes, particularly for the water-stressed countries where the annual water availability is less than 250 m3 per capita. Despite the thermodynamics limit for seawater desalination at normal conditions is about 0.78 to 1.09 kWhelec/m3, the specific energy consumption of desalination of real plants is found to operate at several folds higher. Today’s technological advancement in membranes, namely the reverse osmosis processes, has set an energy consumption of around 3.5–5 kWhelec/m3, while the conventional perception of thermally activated processes such as MSF and MED tends to be higher. Although the higher energetic specific consumption of MED or MSF processes appeared to be higher at 60–100 kWhthermal/m3, their true electricity equivalent has been converted, hitherto, using the energetic analyses where the work potential of working steam of the processes cannot be captured adequately. Thermally activated processes, such as MED and MSF, form the bottoming cycle of a cogeneration plant where both electricity and desalination processes operate in tandem in a cascaded manner. Only the bled-steam at lower exergy is extracted for the desalination processes. In this presentation, we demonstrate that in a cogen plant with 30% bled-steam for MED processes, the exergy destruction ratio is found to be less than 7% of the total available exergy that emanated from the boilers. By the exergetic approach, the equivalent electricity consumption of an average 75 kWhthermal/m3 would result in an electrical equivalent of less than 2.5 kWhelec/m3. Also in this presentation, the authors will elaborate the latest developments in the use of hybridization concept where the MED and the AD cycles are thermodynamically integrated and enhancing the overall efficiency of desalination. © 2015 Balaban Desalination Publications. All rights reserved.

On-Site Renewable Energy and Green Buildings: A System-Level Analysis.

Science.gov (United States)

Al-Ghamdi, Sami G; Bilec, Melissa M

2016-05-03

Adopting a green building rating system (GBRSs) that strongly considers use of renewable energy can have important environmental consequences, particularly in developing countries. In this paper, we studied on-site renewable energy and GBRSs at the system level to explore potential benefits and challenges. While we have focused on GBRSs, the findings can offer additional insight for renewable incentives across sectors. An energy model was built for 25 sites to compute the potential solar and wind power production on-site and available within the building footprint and regional climate. A life-cycle approach and cost analysis were then completed to analyze the environmental and economic impacts. Environmental impacts of renewable energy varied dramatically between sites, in some cases, the environmental benefits were limited despite the significant economic burden of those renewable systems on-site and vice versa. Our recommendation for GBRSs, and broader policies and regulations, is to require buildings with higher environmental impacts to achieve higher levels of energy performance and on-site renewable energy utilization, instead of fixed percentages.

HIGH ENERGY RADIOGRAPHY-1-30 Mev

Energy Technology Data Exchange (ETDEWEB)

Bly, James H.

1963-10-15

From 1963 American Society of Metals/Materials Show, Cleveland, Oct. 1963. A survey of the field of radiographic inspection of thick sections, at one million volts energy or more, shows that this field has become a major branch of radiographic testing. More than a dozen models of x-ray generators are now commercially available in this field, over the range from 1 to 31 Mev, with outputs up to more than two orders of magnitude greater than can be obtained from radiographic isotope sources, and with smaller spot size. A study of the radiographic characteristics of x rays in this region shows that energies available cover the range of minimum absorption and scattering for most materials and approach this range for solid propellant; at higher energies severe coverage restrictions are imposed; output powers on small spots are near the limits of present target technology. It would appear that some degree of technological maturity'' has been achieved. Radiographic technique at 1 to 30 Mev is straightforward, following the same basic principles as in conventional radiography. Specialized aspects of technique are individually discussed. The wellknown 1 and 2 million volt equlpments are supplemented by a wide variety of higher-energy machines, with energy and output ratings to satisfy almost any radiographic need. Some examples are epitomized, and a brief discussion of possible future developments is presented. (auth)

Achievement report on research and development in the Sunshine Project in fiscal 1977. Surveys and studies on patent information (Hydrogen energy); 1977 nendo tokkyo joho chosa kenkyu shosa seika hokokusho, Suiso energy

Energy Technology Data Exchange (ETDEWEB)

NONE

1978-03-01

This paper describes achievements in fiscal 1977 of patent information surveys and studies on hydrogen energy (the Sunshine Project). In the thermo-chemical hydrogen manufacturing process, the basic cycles that have had been applied for patents started to go for searching efficient and feasible cycles such as in auxiliary reactions and catalysts, from the stage at which the efficiency of the basic cycles has not been considered so much. Developments have also been performed on devices and operating conditions. Worth mentioning in the electrolytic method is that patents on electrodes have been released. In the fields of hydrides for storage and transportation, patents on alloys for storage are the most in number. In safety assurance technologies, few patents deal with hydrogen itself, whereas further studies on liquefied hydrogen is especially desired. For hydrogen fuel cells, patent applications for phosphoric acid type fuel cells were found. There are few patents tackling squarely with hydrogen fueled engines. However, their levels of the contents were found higher than those in the previous fiscal year. Patents applied for from private corporations are concentrated on low-pollution engines using hydrogen as sub-fuel. No patents were found applied for measures to solve the dilemma of NOx generation and reverse ignition in hydrogen combustion. (NEDO)

KINGS Model: Achieving Sustainable Change in Nuclear Engineering Education for the Post-COP21 Era

International Nuclear Information System (INIS)

Oh, S.-K.

2016-01-01

Full text: In spite of the world nuclear community’s systematic and multilateral efforts during the COP21, most of the conference participants were reluctant to acknowledge the value of nuclear as a low-carbon energy source. In fact, the on-going aftermath of the Fukushima nuclear disaster has been overwhelming despite the evidence that there was neither any critical technical flaw nor fatal radiation casualties. This shows that advanced nuclear knowledge failed to resonate with public perception on nuclear energy. In this respect, it is now time to focus on achieving sustainable change in nuclear engineering education for the future. The KEPCO International Nuclear Graduate School (KINGS) was established to nurture leadership-level nuclear power professionals in the global standard. It affiliates with Korean nuclear industry to achieve three major goals that are also a universal prerequisite for higher education of engineering in the 21st century as follows: “a balance between education and training,” “harmony between engineering and managerial skills,” and “the application of systems engineering to nuclear power projects.” KINGS curriculum requires transdisciplinary coordination among engineering disciplines, engineering specialties, and socioeconomic methods. (author

New Mexico Higher Education Department Annual Report, 2016

Science.gov (United States)

New Mexico Higher Education Department, 2016

2016-01-01

The New Mexico Higher Education Department strives to bring leadership, guidance, and assistance to New Mexico's higher education stakeholders. The HED is committed to promoting best practices, institutional fiscal responsibility, and student achievement. Everything the agency does is through the lens of supporting New Mexico's higher education…

Financing higher education in South Africa: Public funding ...

African Journals Online (AJOL)

controversy. The article discusses these funding challenges. It argues that the current higher education funding conundrum will hamstring the achievement of the important higher education policy goals articulated in the National Plan on Higher Education. The article finally argues for a shift towards a redistributive funding ...

Prerequisites to promote energy efficiency investments in Bulgaria

International Nuclear Information System (INIS)

Boernsen, O.

1994-01-01

The PHARE Energy Programme's team observation and advice to the Committee of Energy in Bulgaria are outlined. In comparison to the Western European countries energy intensity in Bulgaria is 2-3 times higher. It is explained by the energy intensive industrial structure and the old and depreciated capital equipment. Cost-covering energy prices would make energy efficiency investment financially feasible and would attract financiers. But the lesson from Western European experience is that availability of finance capital and cost reflecting energy prices is not at all a necessary prerequisite for energy efficiency improvement. This improvement can be achieved with no cost or low cost measures. The potential for energy efficiency in industry (consuming more than 50% of the energy) is 11%-20%; in buildings - 6%; in transport - 4%. There are other obstacles, as lack of information, other business interests and no internal expertise, especially for small and medium size industries. The basic prerequisite to improve energy efficiency is raising of awareness and change of management culture, as well as radical change in organisational and management structures. (orig.)

Save with Renewable Energy: A Technical Bulletin for Federal Renewable Energy Champions

Energy Technology Data Exchange (ETDEWEB)

2003-11-01

This eight-page publication, prepared in 2003 for the U.S. Department of Energy's Federal Energy Management Program by the DOE National Renewable Energy Laboratory, is an updated version of the former Save with Solar and Wind bulletin. Save with Renewable Energy provides up-to-date information about the progress that the government is making in achieving federal goals for renewable energy use; agencies have achieved about 60% of the current goal for 2005 of 1384 gigawatt-hours from renewable energy systems. This publication also describes current and planned federal projects featuring wind, solar, and geothermal systems in several different states.

Agro-energy supply chain planning: a procedure to evaluate economic, energy and environmental sustainability

Directory of Open Access Journals (Sweden)

Fabrizio Ginaldi

2012-07-01

Full Text Available The increasing demand for energy and expected shortage in the medium term, solicit innovative energy strategies to fulfill the increasing gap between demand-supply. For this purpose it is important to evaluate the potential supply of the energy crops and finding the areas of EU where it is most convenient. This paper proposes an agro-energy supply chain approach to planning the biofuel supply chain at a regional level. The proposed methodology is the result of an interdisciplinary team work and is aimed to evaluate the potential supply of land for the energy production and the efficiency of the processing plants considering simultaneously economic, energy and environmental targets. The crop simulation, on the basis of this approach, takes into account environmental and agricultural variables (soil, climate, crop, agronomic technique that affect yields, energy and economic costs of the agricultural phase. The use of the Dijkstra’s algorithm allows minimizing the biomass transport path from farm to collecting points and the processing plant, to reduce both the transport cost and the energy consumption. Finally, a global sustainability index (ACSI, Agro-energy Chain Sustainability Index is computed combining economic, energy and environmental aspects to evaluate the sustainability of the Agroenergy supply chain (AESC on the territory. The empirical part consists in a pilot study applied to the whole plain of Friuli Venezia Giulia (FVG a region situated in the North-Eastern part of Italy covering about 161,300 ha. The simulation has been applied to the maize cultivation using three different technologies (different levels of irrigation and nitrogen fertilization: low, medium and high input. The higher input technologies allow to achieve higher crop yields, but affect negatively both the economic and energy balances. Low input levels provides, on the average, the most favourable energy and economic balances. ACSI indicates that low inputs levels

Explaining differences for Serbia and Slovenia in mathematics achievement in fourth grade

Directory of Open Access Journals (Sweden)

Kadijević Đorđe

2015-01-01

Full Text Available This paper presents the findings that are parts of a larger international project studying the achievements in mathematics and science for students in primary and lower secondary education. Specifically, we focused on the study of differences in mathematics achievement for Serbian and Slovenian fourth-graders. The study used a sample of 7,861 fourth-grade students from Serbia (N = 3,736 and Slovenia (N = 4,125. The results showed that Serbian students had higher overall achievement and scored higher in both the number content and the knowing cognitive domains, whereas Slovenian students scored higher on the geometry content and the data content domains, also having a higher balance among achievements for both content and cognitive domains. It was also found that Slovenian students had higher self-confidence in learning mathematics. Because there were no other significant differences between Serbia and Slovenia with respect to two other contextual variables and the correlations among these three contextual variables, the explanations of the achievement differences were based upon the consideration of various aspects of curriculum, teaching practice, and teachers' professional development in Serbia and Slovenia. The paper raises the question of educational implications of these findings and the possible directions of improving the quality of mathematics teaching.

Look at energy compression as an assist for high power rf production

International Nuclear Information System (INIS)

Birx, D.L.; Farkas, Z.D.; Wilson, P.B.

1984-01-01

The desire to construct electron linacs of higher and higher energies, coupled with the realities of available funding and real estate, has forced machine designers to reassess the limitations in both accelerator gradient (MeV/m) and energy. The gradients achieved in current radio-frequency (RF) linacs are sometimes set by electrical breakdown in the accelerating structure, but are in most cases determined by the RF power level available to drive the linac. In this paper we will not discuss RF power sources in general, but rather take a brief look at several energy compression schemes which might be of service in helping to make better use of the sources we employ. We will, however, diverge for a bit and discuss what the RF power requirements are. 12 references, 21 figures, 3 tables

Applying physical input-output tables of energy to estimate the energy ecological footprint (EEF) of Galicia (NW Spain)

International Nuclear Information System (INIS)

Carballo Penela, Adolfo; Sebastian Villasante, Carlos

2008-01-01

Nowadays, the achievement of sustainable development constitutes an important constraint in the design of energy policies, being necessary the development of reliable indicators to obtain helpful information about the use of energy resources. The ecological footprint (EF) provides a referential framework for the analysis of human demand for bioproductivity, including energy issues. In this article, the theoretical bases of the footprint analysis are described by applying input-output tables of energy to estimate the Galician energy ecological footprint (EEF). It is concluded that the location of highly polluting industries in Galicia makes the Galician EEF quite higher than more developed regions of Spain. The relevance of the outer component of the Galician EEF is also studied. First, available information seems to indicate that the energy incorporated to the trading of manufactured goods would notably increase the Galician consumption of energy. On the other hand, the inclusion of electricity trade in the EEF analysis, including an adjustment, following the same philosophy as with manufactured goods is proposed. This adjustment would substantially reduce the Galician EEF, as the exported electricity widely exceeds the imported one

Lead-ion collisions: the LHC achieves a new energy record

CERN Multimedia

John Jowett

2015-01-01

After the Bevatron (Berkeley, 1954) – which broke the energy barrier of billions of electronvolts – and the Tevatron (Fermilab, 1987) – which reached a trillion electronvolts – the LHC is now reaching the peta- (quadrillion) electronvolt level with its heavy-ion collisions (see here). However, one should remember that the average energy per colliding nucleon pair, within the 1 PeV “fireball”, is 5 TeV (compared to 13 TeV in the recent proton-proton collisions).   Heavy-ion collision events from the ALICE, ATLAS, CMS and LHCb experiments. Two of the great particle accelerators of the past were named after the symbolic energy barrier that they broke. The Bevatron (for "billions of electronvolts synchrotron"), at Berkeley in 1954, was the first to break the barrier of a billion electronvolts or BeV (now known as a gigaelectronvolt or GeV) in the centre-of-mass, by a large enough margin to create the laboratory’s ...

Higher-derivative Lee-Wick unification

International Nuclear Information System (INIS)

Carone, Christopher D.

2009-01-01

We consider gauge coupling unification in Lee-Wick extensions of the Standard Model that include higher-derivative quadratic terms beyond the minimally required set. We determine how the beta functions are modified when some Standard Model particles have two Lee-Wick partners. We show that gauge coupling unification can be achieved in such models without requiring the introduction of additional fields in the higher-derivative theory and we comment on possible ultraviolet completions.

Clean Energy Progress Report

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

For the past several years, the IEA and others have been calling for a clean energy revolution to achieve global energy security, economic growth and climate change goals. This report analyses for the first time progress in global clean energy technology deployment against the pathways that are needed to achieve these goals. It provides an overview of technology deployment status, key policy developments and public spending on RDD&D of clean energy technologies.

Student achievement in science: A longitudinal look at individual and school differences

Science.gov (United States)

Martinez, Alina

The importance of science in today's technological society necessitates continued attention to students' experiences in science and specifically their achievement in science. There is a need to look at gender and race/ethnicity simultaneously when studying students' experiences in science and to explore factors related to higher achievement among students. Using data from the Longitudinal Study of American Youth, this study contributes to existing literature on student achievement in science by simultaneously exploring the effects of race/ethnicity and gender. Capitalizing on the availability of yearly science achievement scores, I present trajectories of student achievement from 7th to 12th grade. This study also includes an exploration of school effects. Overall, student achievement in science increases from 7th to 12th grade, although some leveling is seen in later grades. Growth in achievement differs by both gender and race/ethnicity, but racial/ethnic differences are larger than gender differences. Hispanic, Black, Asian, and White males score higher, on average, throughout the secondary grades than their female counterparts. Achievement scores of Asian students are consistently higher than White students, who in turn score higher than Hispanic and finally Black students. Both background and science-related factors help explain variation in achievement status and growth in achievement. Parental education is positively associated with achievement status among all groups except Black students for whom there is no effect of parental education. Science related resources in the home are positively associated with student achievement and the effect of these resources increases in later grades. Student achievement in science is also positively related to student course taking and attitude toward science. Furthermore, both the negative effect of viewing science as a male domain, which exists for males and females, and the positive effect of parental support for

The Challenge of Energy Efficiency

International Nuclear Information System (INIS)

Alonso Gonzalez, J. A.

2009-01-01

Recent Directive 2009/28/EC on the promotion of the use of renewable energies sets some binding targets for the contribution of renewable energies in 2020 to total consumption, setting the share at 20% of final energy demand, with a particularisation of 10% for the transport sector, and also a 20% reduction of greenhouse gases Together with these targets, it also sets another target relative to energy efficiency, aiming for a 20% improvement, under the terms set down by the Commission in its announcement dated 19 October 2006. This energy saving target is going to have a decisive influence on the achievement of the other two. In order to quantify the degree of difficulty of achieving the saving target and determine the policies and measures to be taken, we are going to analyze the evolution of energy efficiency (energy consumption energy units per unit of GDP - economic unit) in Spain from 1980 to date and the value of energy intensity that we should have in 2020 to achieve the targets. This will give us an idea of the magnitude of the challenge and, therefore, of the efforts we will have to make to achieve the target. (Author)

Higher-order semiclassical energy expansions for potentials with ...

Indian Academy of Sciences (India)

global behavior of eigenfunctions and energy spectra of quantum mechanical systems are very important. ... where p, q and r are positive integers and contourC encloses points +1 and -1 on the real axis. Also these ... Derivation of AEE which is a relationship between quantum number k and the power series expansion of ...

Vietnam's energy sector: A review of current energy policies and strategies

Energy Technology Data Exchange (ETDEWEB)

Tien Minh Do, E-mail: tmdo@eng.uts.edu.au [Hanoi University of Science and Technology (HUST), 1 Dai Co Viet Street, Hai Ba Trung District, Hanoi (Viet Nam); Sharma, Deepak [University of Technology, Sydney (UTS), Broadway, Ultimo, NSW 2007 (Australia)

2011-10-15

Since the introduction of market-oriented economy in 1986, Vietnam has made noticeable socio-economic progress. In this progress, the energy sector has played a vital role. This role is likely to deepen in the years to come as Vietnam strives to achieve even higher levels in economic progress. Such deepening in the role of energy, this paper argues, will heighten concerns about the security of energy supply, and economic, environmental, social and political consequences. In order to address these issues, Vietnam has over the last decade, developed a suite of energy policies. A deeper review of these policies suggests that they are typified by economic-growth orientation, exclusive focus on a single-sector or single issue, and largely neglect the significance of cross-sectoral and cross-thematic issues arising from the interdependencies between energy, economy, and the polity at large. The existing energy policy settings are, therefore, unlikely to be able to provide a satisfactory redress to the challenges noted above. This paper provides an overview of the current energy policies with a view to identify areas where further policy effort is needed in order to facilitate a sustainable development of the Vietnamese energy sector. - Highlights: > Identifying challenges faced by the Vietnamese energy sector. > Analyzing limitations of the existing energy policy settings (policies, strategies and institutions) in addressing these challenges. > Developing recommendations on improving the existing energy policy settings to provide a satisfactory redress for the challenges noted above.

Significantly Elevated Dielectric and Energy Storage Traits in Boron Nitride Filled Polymer Nano-composites with Topological Structure

Science.gov (United States)

Feng, Yefeng; Zhang, Jianxiong; Hu, Jianbing; Li, Shichun; Peng, Cheng

2018-03-01

Interface induced polarization has a prominent influence on dielectric properties of 0-3 type polymer based composites containing Si-based semi-conductors. The disadvantages of composites were higher dielectric loss, lower breakdown strength and energy storage density, although higher permittivity was achieved. In this work, dielectric, conductive, breakdown and energy storage properties of four nano-composites have been researched. Based on the cooperation of fluoropolymer/alpha-SiC layer and fluoropolymer/hexagonal-BN layer, it was confirmed constructing the heterogeneous layer-by-layer composite structure rather than homogeneous mono-layer structure could significantly reduce dielectric loss, promote breakdown strength and increase energy storage density. The former worked for a larger dielectric response and the latter layer acted as a robust barrier of charge carrier transfer. The best nano-composite could possess a permittivity of 43@100 Hz ( 3.3 times of polymer), loss of 0.07@100 Hz ( 37% of polymer), discharged energy density of 2.23 J/cm3@249 kV/cm ( 10 times of polymer) and discharged energy efficiency of 54%@249 kV/cm ( 5 times of polymer). This work might enlighten a facile route to achieve the promising high energy storage composite dielectrics by constructing the layer-by-layer topological structure.

Why invest in wind energy? Career incentives and Chinese renewable energy politics

International Nuclear Information System (INIS)

Cao, Xun; Kleit, Andrew; Liu, Chuyu

2016-01-01

We study wind development at the provincial level in China, modelling installed wind capacities as a function of both economics and politics. We assume that the top provincial officials desire to maximize their chances of promotion under the Chinese cadre evaluation system. We expect that those with the strongest incentives to perform in order to achieve promotion would work harder to comply with the central government’s policy agenda to promote renewable energy. Collecting and testing data on provincial leaders’ characteristics, we find that provinces governed by party secretaries who were approaching the age of 65 are associated with significantly higher level of wind installed capacities. This result supports the political tournaments theory of Chinese politics. We also find that better educated party secretaries are likely to be more supportive of renewable energy, implying that education acts to encourage provincial leaders to support the central government’s policy. - Highlights: • No negative association between fossil fuel production and wind energy development. • Provinces with party secretaries approaching the age of 65 have more installed capacities. • Better educated party secretaries are likely to be more supportive of renewable energy.

Achievement goals, social goals, and motivational regulations in physical education settings.

Science.gov (United States)

Cecchini Estrada, José A; González González-Mesa, Carmen; Méndez-Giménez, Antonio; Fernández-Río, Javier

2011-02-01

This study examined the relationship between achievement and social goals, and explored how both goals affect students' level of informed self-determination in Physical Education. Participants were 395 high school students. Three scales were used to assess achievement, social goals, and motivation. Several hierarchical regression analyses revealed that mastery-approach goals were the greatest contributors to the individuals' levels of self-determination. Achievement and social goals were found to be separate predictors of students' levels of self-determination, and this highlights the importance of separating mastery and performance goals into avoidance and approach profiles. Girls reported significantly higher values than boys on responsibility, relationship, and mastery-avoidance goals, whereas boys scored higher on performance-approach goals. Researchers could use achievement and social goals to study students' motivation and achievement in Physical Education settings.

Advanced, Integrated Control for Building Operations to Achieve 40% Energy Saving

Energy Technology Data Exchange (ETDEWEB)

Lu, Yan; Song, Zhen; Loftness, Vivian; Ji, Kun; Zheng, Sam; Lasternas, Bertrand; Marion, Flore; Yuebin, Yu

2012-10-15

We developed and demonstrated a software based integrated advanced building control platform called Smart Energy Box (SEB), which can coordinate building subsystem controls, integrate variety of energy optimization algorithms and provide proactive and collaborative energy management and control for building operations using weather and occupancy information. The integrated control system is a low cost solution and also features: Scalable component based architecture allows to build a solution for different building control system configurations with needed components; Open Architecture with a central data repository for data exchange among runtime components; Extendible to accommodate variety of communication protocols. Optimal building control for central loads, distributed loads and onsite energy resource; uses web server as a loosely coupled way to engage both building operators and building occupants in collaboration for energy conservation. Based on the open platform of SEB, we have investigated and evaluated a variety of operation and energy saving control strategies on Carnegie Mellon University Intelligent Work place which is equipped with alternative cooling/heating/ventilation/lighting methods, including radiant mullions, radiant cooling/heating ceiling panels, cool waves, dedicated ventilation unit, motorized window and blinds, and external louvers. Based on the validation results of these control strategies, they were integrated in SEB in a collaborative and dynamic way. This advanced control system was programmed and computer tested with a model of the Intelligent Workplace's northern section (IW_n). The advanced control program was then installed in the IW_n control system; the performance was measured and compared with that of the state of the art control system to verify the overall energy savings great than 40%. In addition advanced human machine interfaces (HMI's) were developed to communicate both with building

Ultrathin Coaxial Fiber Supercapacitors Achieving High Energy and Power Densities.

Science.gov (United States)

Shen, Caiwei; Xie, Yingxi; Sanghadasa, Mohan; Tang, Yong; Lu, Longsheng; Lin, Liwei

2017-11-15

Fiber-based supercapacitors have attracted significant interests because of their potential applications in wearable electronics. Although much progress has been made in recent years, the energy and power densities, mechanical strength, and flexibility of such devices are still in need of improvement for practical applications. Here, we demonstrate an ultrathin microcoaxial fiber supercapacitor (μCFSC) with high energy and power densities (2.7 mW h/cm 3 and 13 W/cm 3 ), as well as excellent mechanical properties. The prototype with the smallest reported overall diameter (∼13 μm) is fabricated by successive coating of functional layers onto a single micro-carbon-fiber via a scalable process. Combining the simulation results via the electrochemical model, we attribute the high performance to the well-controlled thin coatings that make full use of the electrode materials and minimize the ion transport path between electrodes. Moreover, the μCFSC features high bending flexibility and large tensile strength (more than 1 GPa), which make it promising as a building block for various flexible energy storage applications.

Danish aid to higher education

DEFF Research Database (Denmark)

Adriansen, Hanne Kirstine

2016-01-01

This piece comments on the role of higher education and universities in achieving the goals of Agenda 2030. It also asks if global academic collaboration is a new form of colonization or if researchers from the North can assist in decolonising the academy....

The researches on energy sustainability in Northern China

Directory of Open Access Journals (Sweden)

Wang Ping

2018-01-01

Full Text Available Energy, which accounts for two-thirds of today’s greenhouse gas emissions, is the key to reducing greenhouse gas emissions and slowing global warming. In this paper, the IPCC-recommended reference approach and scenario analysis were applied to evaluate dynamic change of the energy supply and energy-related carbon dioxide emissions within the period of 2000-2025 in Northern China (NC. The results show that energy importing reliance reached 85% in 2015 and the energy structure has become more diversified in NC. In addition, the per-capita CO2 emission is significantly higher while carbon intensity is lower than those of the national average. Under the LC scenario, CO2 emissions begin to fall for the first time in 2022. Hence, if Energy-Saving and Emission-Reduction strategy and regional planning for NC are implemented fully, NC will achieve the national emission reduction targets in 2025 and will have a large CO2 mitigation potential in the future.

Associations between children's intelligence and academic achievement: the role of sleep.

Science.gov (United States)

Erath, Stephen A; Tu, Kelly M; Buckhalt, Joseph A; El-Sheikh, Mona

2015-10-01

Sleep problems (long wake episodes, low sleep efficiency) were examined as moderators of the relation between children's intelligence and academic achievement. The sample was comprised of 280 children (55% boys; 63% European Americans, 37% African Americans; mean age = 10.40 years, SD = 0.65). Sleep was assessed during seven consecutive nights of actigraphy. Children's performance on standardized tests of intelligence (Brief Intellectual Ability index of the Woodcock-Johnson III) and academic achievement (Alabama Reading and Math Test) were obtained. Age, sex, ethnicity, income-to-needs ratio, single parent status, standardized body mass index, chronic illness and pubertal development were controlled in analyses. Higher intelligence was strongly associated with higher academic achievement across a wide range of sleep quality. However, the association between intelligence and academic achievement was slightly attenuated among children with more long wake episodes or lower sleep efficiency compared with children with higher-quality sleep. © 2015 European Sleep Research Society.

Intensifying the intrinsic motivation by differentiating the teaching strategies in higher education

Directory of Open Access Journals (Sweden)

Tulbure, C.

2011-01-01

Full Text Available Learning motivation represents one of the most importantpredictors of academic achievement in higher education. In this empirical study, we have implemented a formative program to improve the university students’ academic achievement and their intrinsic learning motivation. To fully use their intellectual potential, students were treated according to their learning style, throughout one academic year. When we considered the within subject design, both intrinsic motivation and academic achievement significantly increased at the end of the study. Only intrinsic motivation proved to be significantly higher for the between subject comparison. Because our formative program proved to have a significant impact on students’ learning motivation, we recommend the differentiated teaching strategies to improve the academic achievement in higher education.

The association of identity and motivation with students' academic achievement in higher education

NARCIS (Netherlands)

Meens, E.E.M.; Bakx, A.W.E.A.; Klimstra, T.A.; Denissen, J.J.A.

2018-01-01

Two main reasons for dropping out of higher education are making an erroneous educational choice (an identity commitment) and lack of motivation. This study examined whether identity formation and motivation among prospective students at the moment of choosing a bachelor's program (N = 8723)

Class size, type of exam and student achievement

DEFF Research Database (Denmark)

Madsen, Erik

Education as a road to growth has been on the political agenda in recent years and promoted not least by the institutions of higher education. At the same time the universities have been squeezed for resources for a long period and the average class size has increased as a result. However......, the production technology for higher education is not well known and this study highlights the relation between class size and student achievement using a large dataset of 80.000 gradings from the Aarhus School of Business. The estimations show a large negative effect of larger classes on the grade level...... of students. The type of exam also has a large and significant effect on student achievements and oral exam, take-home exam and group exam reward the student with a significantly higher grade compared with an on-site written exam....