WorldWideScience

Sample records for acetochlor pc code

  1. PC-Reactor-core transient simulation code

    International Nuclear Information System (INIS)

    Nakata, H.

    1989-10-01

    PC-REATOR, a reactor core transient simulation code has been developed for the real-time operator training on a IBM-PC microcomputer. The program presents capabilities for on-line exchange of the operating parameters during the transient simulation, by friendly keyboard instructions. The model is based on the point-kinetics approximation, with 2 delayed neutron percursors and up to 11 decay power generating groups. (author) [pt

  2. HOTSPOT Health Physics codes for the PC

    International Nuclear Information System (INIS)

    Homann, S.G.

    1994-03-01

    The HOTSPOT Health Physics codes were created to provide Health Physics personnel with a fast, field-portable calculation tool for evaluating accidents involving radioactive materials. HOTSPOT codes are a first-order approximation of the radiation effects associated with the atmospheric release of radioactive materials. HOTSPOT programs are reasonably accurate for a timely initial assessment. More importantly, HOTSPOT codes produce a consistent output for the same input assumptions and minimize the probability of errors associated with reading a graph incorrectly or scaling a universal nomogram during an emergency. The HOTSPOT codes are designed for short-term (less than 24 hours) release durations. Users requiring radiological release consequences for release scenarios over a longer time period, e.g., annual windrose data, are directed to such long-term models as CAPP88-PC (Parks, 1992). Users requiring more sophisticated modeling capabilities, e.g., complex terrain; multi-location real-time wind field data; etc., are directed to such capabilities as the Department of Energy's ARAC computer codes (Sullivan, 1993). Four general programs -- Plume, Explosion, Fire, and Resuspension -- calculate a downwind assessment following the release of radioactive material resulting from a continuous or puff release, explosive release, fuel fire, or an area contamination event. Other programs deal with the release of plutonium, uranium, and tritium to expedite an initial assessment of accidents involving nuclear weapons. Additional programs estimate the dose commitment from the inhalation of any one of the radionuclides listed in the database of radionuclides; calibrate a radiation survey instrument for ground-survey measurements; and screen plutonium uptake in the lung (see FIDLER Calibration and LUNG Screening sections)

  3. HOTSPOT Health Physics codes for the PC

    Energy Technology Data Exchange (ETDEWEB)

    Homann, S.G.

    1994-03-01

    The HOTSPOT Health Physics codes were created to provide Health Physics personnel with a fast, field-portable calculation tool for evaluating accidents involving radioactive materials. HOTSPOT codes are a first-order approximation of the radiation effects associated with the atmospheric release of radioactive materials. HOTSPOT programs are reasonably accurate for a timely initial assessment. More importantly, HOTSPOT codes produce a consistent output for the same input assumptions and minimize the probability of errors associated with reading a graph incorrectly or scaling a universal nomogram during an emergency. The HOTSPOT codes are designed for short-term (less than 24 hours) release durations. Users requiring radiological release consequences for release scenarios over a longer time period, e.g., annual windrose data, are directed to such long-term models as CAPP88-PC (Parks, 1992). Users requiring more sophisticated modeling capabilities, e.g., complex terrain; multi-location real-time wind field data; etc., are directed to such capabilities as the Department of Energy`s ARAC computer codes (Sullivan, 1993). Four general programs -- Plume, Explosion, Fire, and Resuspension -- calculate a downwind assessment following the release of radioactive material resulting from a continuous or puff release, explosive release, fuel fire, or an area contamination event. Other programs deal with the release of plutonium, uranium, and tritium to expedite an initial assessment of accidents involving nuclear weapons. Additional programs estimate the dose commitment from the inhalation of any one of the radionuclides listed in the database of radionuclides; calibrate a radiation survey instrument for ground-survey measurements; and screen plutonium uptake in the lung (see FIDLER Calibration and LUNG Screening sections).

  4. 78 FR 13264 - Acetochlor; Pesticide Tolerances

    Science.gov (United States)

    2013-02-27

    ... refer to non-occupational, non-dietary exposure (e.g., for lawn and garden pest control, indoor pest control, termiticides, and flea and tick control on pets). Acetochlor is not registered for any specific... infants and children in the case of threshold effects to account for prenatal and postnatal toxicity and...

  5. Codes CONV45 and CONV56 for a PC

    International Nuclear Information System (INIS)

    Rose, P.F.

    1988-03-01

    The codes CONV45 and CONV56 convert data files from ENDF/B-4 to ENDF/B-5 and from ENDF/B-5 to ENDF/B-6 format respectively. The codes which were received from US National Nuclear Data Center were implemented at the IAEA Nuclear Data Section for use on personal computers. (author). 2 refs, 3 tabs

  6. VENTURE/PC manual: A multidimensional multigroup neutron diffusion code system. Version 3

    Energy Technology Data Exchange (ETDEWEB)

    Shapiro, A.; Huria, H.C.; Cho, K.W. [Cincinnati Univ., OH (United States)

    1991-12-01

    VENTURE/PC is a recompilation of part of the Oak Ridge BOLD VENTURE code system, which will operate on an IBM PC or compatible computer. Neutron diffusion theory solutions are obtained for multidimensional, multigroup problems. This manual contains information associated with operating the code system. The purpose of the various modules used in the code system, and the input for these modules are discussed. The PC code structure is also given. Version 2 included several enhancements not given in the original version of the code. In particular, flux iterations can be done in core rather than by reading and writing to disk, for problems which allow sufficient memory for such in-core iterations. This speeds up the iteration process. Version 3 does not include any of the special processors used in the previous versions. These special processors utilized formatted input for various elements of the code system. All such input data is now entered through the Input Processor, which produces standard interface files for the various modules in the code system. In addition, a Standard Interface File Handbook is included in the documentation which is distributed with the code, to assist in developing the input for the Input Processor.

  7. VENTURE/PC manual: A multidimensional multigroup neutron diffusion code system

    Energy Technology Data Exchange (ETDEWEB)

    Shapiro, A.; Huria, H.C.; Cho, K.W. (Cincinnati Univ., OH (United States))

    1991-12-01

    VENTURE/PC is a recompilation of part of the Oak Ridge BOLD VENTURE code system, which will operate on an IBM PC or compatible computer. Neutron diffusion theory solutions are obtained for multidimensional, multigroup problems. This manual contains information associated with operating the code system. The purpose of the various modules used in the code system, and the input for these modules are discussed. The PC code structure is also given. Version 2 included several enhancements not given in the original version of the code. In particular, flux iterations can be done in core rather than by reading and writing to disk, for problems which allow sufficient memory for such in-core iterations. This speeds up the iteration process. Version 3 does not include any of the special processors used in the previous versions. These special processors utilized formatted input for various elements of the code system. All such input data is now entered through the Input Processor, which produces standard interface files for the various modules in the code system. In addition, a Standard Interface File Handbook is included in the documentation which is distributed with the code, to assist in developing the input for the Input Processor.

  8. Biodegradation of acetochlor by a newly isolated Pseudomonas strain.

    Science.gov (United States)

    Luo, Wei; Gu, Qiuya; Chen, Wenting; Zhu, Xiangcheng; Duan, Zhibing; Yu, Xiaobin

    2015-05-01

    A novel microbial strain JD115 capable of degrading acetochlor was isolated from the sludge of acetochlor manufacture and was identified as Pseudomonas aeruginosa species. This strain was able to grow on acetochlor as the sole source of both carbon and nitrogen. The biodegradation of acetochlor by strain JD115 could be described either by the pseudo-first-order or by the second-order kinetics models, while the latter gave a better performance. The strain optimally degraded acetochlor at a pH value of 7.0 and a temperature of 37 °C. Additional nutriments could greatly enhance the degradation rate of acetochlor up to 95.4% in the presence of 50 mg acetochlor l(-1). The metabolite analyses by GC-MS presumed that catechol was an intermediate product of acetochlor, which was finally degraded for 5 days of incubation. This study highlights the potential use of this strain for the bioremediation of an acetochlor-polluted environment.

  9. [Determination of acetochlor and oxyfluorfen by capillary gas chromatography].

    Science.gov (United States)

    Xiang, Wen-Sheng; Wang, Xiang-Jing; Wang, Jing; Wang, Qing

    2002-09-01

    A method is described for the determination of acetochlor and oxyfluorfen by capillary gas chromatography with FID and an SE-30 capillary column (60 m x 0.53 mm i. d., 1.5 microm), using dibutyl phthalate as the internal standard. The standard deviations for acetochlor and oxyfluorfen concentration(mass fraction) were 0.44% and 0.47% respectively. The relative standard deviations for acetochlor and oxyfluorfen were 0.79% and 0.88% and the average recoveries for acetochlor and oxyfluorfen were 99.3% and 101.1% respectively. The method is simple, rapid and accurate.

  10. Effects of acetochlor (herbicide) on the survival and avoidance ...

    African Journals Online (AJOL)

    This study was designed to evaluate the potential effects of acetochlor (herbicide) on the survival and avoidance behaviour of lycosid spiders example Lycosa terrestris. During the topical toxicity experiment, P. birmanica was found to be more susceptible to acetochlor than L. terrestris. Although, there was 10% mortality at ...

  11. Development a computer codes to couple PWR-GALE output and PC-CREAM input

    Science.gov (United States)

    Kuntjoro, S.; Budi Setiawan, M.; Nursinta Adi, W.; Deswandri; Sunaryo, G. R.

    2018-02-01

    Radionuclide dispersion analysis is part of an important reactor safety analysis. From the analysis it can be obtained the amount of doses received by radiation workers and communities around nuclear reactor. The radionuclide dispersion analysis under normal operating conditions is carried out using the PC-CREAM code, and it requires input data such as source term and population distribution. Input data is derived from the output of another program that is PWR-GALE and written Population Distribution data in certain format. Compiling inputs for PC-CREAM programs manually requires high accuracy, as it involves large amounts of data in certain formats and often errors in compiling inputs manually. To minimize errors in input generation, than it is make coupling program for PWR-GALE and PC-CREAM programs and a program for writing population distribution according to the PC-CREAM input format. This work was conducted to create the coupling programming between PWR-GALE output and PC-CREAM input and programming to written population data in the required formats. Programming is done by using Python programming language which has advantages of multiplatform, object-oriented and interactive. The result of this work is software for coupling data of source term and written population distribution data. So that input to PC-CREAM program can be done easily and avoid formatting errors. Programming sourceterm coupling program PWR-GALE and PC-CREAM is completed, so that the creation of PC-CREAM inputs in souceterm and distribution data can be done easily and according to the desired format.

  12. Neutron shielding point kernel integral calculation code for personal computer: PKN-pc

    International Nuclear Information System (INIS)

    Kotegawa, Hiroshi; Sakamoto, Yukio; Nakane, Yoshihiro; Tomita, Ken-ichi; Kurosawa, Naohiro.

    1994-07-01

    A personal computer version of PKN code, PKN-pc, has been developed to calculate neutron and secondary gamma-ray 1cm depth dose equivalents in water, ordinary concrete and iron for neutron source. Characteristics of PKN code are, to able to calculate dose equivalents in multi-layer three-dimensional system, which are described with two-dimensional surface, for monoenergetic neutron source from 0.01 to 14.9 MeV, 252 Cf fission and 241 Am-Be neutron source quick and easily. In addition to these features, the PKN-pc is possible to process interactive input and to get graphical system configuration and graphical results easily. (author)

  13. SHEAT for PC. A computer code for probabilistic seismic hazard analysis for personal computer, user's manual

    International Nuclear Information System (INIS)

    Yamada, Hiroyuki; Tsutsumi, Hideaki; Ebisawa, Katsumi; Suzuki, Masahide

    2002-03-01

    The SHEAT code developed at Japan Atomic Energy Research Institute is for probabilistic seismic hazard analysis which is one of the tasks needed for seismic Probabilistic Safety Assessment (PSA) of a nuclear power plant. At first, SHEAT was developed as the large sized computer version. In addition, a personal computer version was provided to improve operation efficiency and generality of this code in 2001. It is possible to perform the earthquake hazard analysis, display and the print functions with the Graphical User Interface. With the SHEAT for PC code, seismic hazard which is defined as an annual exceedance frequency of occurrence of earthquake ground motions at various levels of intensity at a given site is calculated by the following two steps as is done with the large sized computer. One is the modeling of earthquake generation around a site. Future earthquake generation (locations, magnitudes and frequencies of postulated earthquake) is modeled based on the historical earthquake records, active fault data and expert judgment. Another is the calculation of probabilistic seismic hazard at the site. An earthquake ground motion is calculated for each postulated earthquake using an attenuation model taking into account its standard deviation. Then the seismic hazard at the site is calculated by summing the frequencies of ground motions by all the earthquakes. This document is the user's manual of the SHEAT for PC code. It includes: (1) Outline of the code, which include overall concept, logical process, code structure, data file used and special characteristics of code, (2) Functions of subprogram and analytical models in them, (3) Guidance of input and output data, (4) Sample run result, and (5) Operational manual. (author)

  14. Identification and Functional Characterization of G6PC2 Coding Variants Influencing Glycemic Traits Define an Effector Transcript at the G6PC2-ABCB11 Locus

    Science.gov (United States)

    Mahajan, Anubha; Sim, Xueling; Ng, Hui Jin; Manning, Alisa; Rivas, Manuel A.; Highland, Heather M.; Locke, Adam E.; Grarup, Niels; Im, Hae Kyung; Cingolani, Pablo; Flannick, Jason; Fontanillas, Pierre; Fuchsberger, Christian; Gaulton, Kyle J.; Teslovich, Tanya M.; Rayner, N. William; Robertson, Neil R.; Beer, Nicola L.; Rundle, Jana K.; Bork-Jensen, Jette; Ladenvall, Claes; Blancher, Christine; Buck, David; Buck, Gemma; Burtt, Noël P.; Gabriel, Stacey; Gjesing, Anette P.; Groves, Christopher J.; Hollensted, Mette; Huyghe, Jeroen R.; Jackson, Anne U.; Jun, Goo; Justesen, Johanne Marie; Mangino, Massimo; Murphy, Jacquelyn; Neville, Matt; Onofrio, Robert; Small, Kerrin S.; Stringham, Heather M.; Syvänen, Ann-Christine; Trakalo, Joseph; Abecasis, Goncalo; Bell, Graeme I.; Blangero, John; Cox, Nancy J.; Duggirala, Ravindranath; Hanis, Craig L.; Seielstad, Mark; Wilson, James G.; Christensen, Cramer; Brandslund, Ivan; Rauramaa, Rainer; Surdulescu, Gabriela L.; Doney, Alex S. F.; Lannfelt, Lars; Linneberg, Allan; Isomaa, Bo; Tuomi, Tiinamaija; Jørgensen, Marit E.; Jørgensen, Torben; Kuusisto, Johanna; Uusitupa, Matti; Salomaa, Veikko; Spector, Timothy D.; Morris, Andrew D.; Palmer, Colin N. A.; Collins, Francis S.; Mohlke, Karen L.; Bergman, Richard N.; Ingelsson, Erik; Lind, Lars; Tuomilehto, Jaakko; Hansen, Torben; Watanabe, Richard M.; Prokopenko, Inga; Dupuis, Josee; Karpe, Fredrik; Groop, Leif; Laakso, Markku; Pedersen, Oluf; Florez, Jose C.; Morris, Andrew P.; Altshuler, David; Meigs, James B.; Boehnke, Michael; McCarthy, Mark I.; Lindgren, Cecilia M.; Gloyn, Anna L.

    2015-01-01

    Genome wide association studies (GWAS) for fasting glucose (FG) and insulin (FI) have identified common variant signals which explain 4.8% and 1.2% of trait variance, respectively. It is hypothesized that low-frequency and rare variants could contribute substantially to unexplained genetic variance. To test this, we analyzed exome-array data from up to 33,231 non-diabetic individuals of European ancestry. We found exome-wide significant (P<5×10-7) evidence for two loci not previously highlighted by common variant GWAS: GLP1R (p.Ala316Thr, minor allele frequency (MAF)=1.5%) influencing FG levels, and URB2 (p.Glu594Val, MAF = 0.1%) influencing FI levels. Coding variant associations can highlight potential effector genes at (non-coding) GWAS signals. At the G6PC2/ABCB11 locus, we identified multiple coding variants in G6PC2 (p.Val219Leu, p.His177Tyr, and p.Tyr207Ser) influencing FG levels, conditionally independent of each other and the non-coding GWAS signal. In vitro assays demonstrate that these associated coding alleles result in reduced protein abundance via proteasomal degradation, establishing G6PC2 as an effector gene at this locus. Reconciliation of single-variant associations and functional effects was only possible when haplotype phase was considered. In contrast to earlier reports suggesting that, paradoxically, glucose-raising alleles at this locus are protective against type 2 diabetes (T2D), the p.Val219Leu G6PC2 variant displayed a modest but directionally consistent association with T2D risk. Coding variant associations for glycemic traits in GWAS signals highlight PCSK1, RREB1, and ZHX3 as likely effector transcripts. These coding variant association signals do not have a major impact on the trait variance explained, but they do provide valuable biological insights. PMID:25625282

  15. Identification and functional characterization of G6PC2 coding variants influencing glycemic traits define an effector transcript at the G6PC2-ABCB11 locus.

    Directory of Open Access Journals (Sweden)

    Anubha Mahajan

    2015-01-01

    Full Text Available Genome wide association studies (GWAS for fasting glucose (FG and insulin (FI have identified common variant signals which explain 4.8% and 1.2% of trait variance, respectively. It is hypothesized that low-frequency and rare variants could contribute substantially to unexplained genetic variance. To test this, we analyzed exome-array data from up to 33,231 non-diabetic individuals of European ancestry. We found exome-wide significant (P<5×10-7 evidence for two loci not previously highlighted by common variant GWAS: GLP1R (p.Ala316Thr, minor allele frequency (MAF=1.5% influencing FG levels, and URB2 (p.Glu594Val, MAF = 0.1% influencing FI levels. Coding variant associations can highlight potential effector genes at (non-coding GWAS signals. At the G6PC2/ABCB11 locus, we identified multiple coding variants in G6PC2 (p.Val219Leu, p.His177Tyr, and p.Tyr207Ser influencing FG levels, conditionally independent of each other and the non-coding GWAS signal. In vitro assays demonstrate that these associated coding alleles result in reduced protein abundance via proteasomal degradation, establishing G6PC2 as an effector gene at this locus. Reconciliation of single-variant associations and functional effects was only possible when haplotype phase was considered. In contrast to earlier reports suggesting that, paradoxically, glucose-raising alleles at this locus are protective against type 2 diabetes (T2D, the p.Val219Leu G6PC2 variant displayed a modest but directionally consistent association with T2D risk. Coding variant associations for glycemic traits in GWAS signals highlight PCSK1, RREB1, and ZHX3 as likely effector transcripts. These coding variant association signals do not have a major impact on the trait variance explained, but they do provide valuable biological insights.

  16. Application of an integrated PC-based neutronics code system to criticality safety

    International Nuclear Information System (INIS)

    Briggs, J.B.; Nigg, D.W.

    1991-01-01

    An integrated system of neutronics and radiation transport software suitable for operation in an IBM PC-class environment has been under development at the Idaho National Engineering Laboratory (INEL) for the past four years. Four modules within the system are particularly useful for criticality safety applications. Using the neutronics portion of the integrated code system, effective neutron multiplication values (k eff values) have been calculated for a variety of benchmark critical experiments for metal systems (Plutonium and Uranium), Aqueous Systems (Plutonium and Uranium) and LWR fuel rod arrays. A description of the codes and methods used in the analysis and the results of the benchmark critical experiments are presented in this paper. In general, excellent agreement was found between calculated and experimental results. (Author)

  17. PRAAGE-1988: An interactive IBM-PC code for aging analysis of NUREG-1150 systems

    International Nuclear Information System (INIS)

    Fullwood, R.R.; Shier, W.G.

    1988-01-01

    Probabilistic Risk Assessments (PRA) contain a great deal of information for estimating the risk of a nuclear power plant but do not consider aging. PRAAGE (PRA+AGE) is an interactive, IBM-PC code for processing PRA-developed system models using non-aged failure rate data in conjunction with user-supplied time-dependent nuclear plant experience component failure rate data to determine the effects of component aging on a system's reliability as well as providing the age-dependent importances of various generic components. This paper describes the structure, use and application of PRAAGE to the aging analysis of the Peach Bottom 2 RHR system in the LPCI and SDC modes of operation. 4 refs., 15 figs., 5 tabs

  18. Isolation and characterization of a pseudomonas oleovorans degrading the chloroacetamide herbicide acetochlor.

    Science.gov (United States)

    Xu, Jun; Qiu, Xinghui; Dai, Jiayin; Cao, Hong; Yang, Min; Zhang, Jing; Xu, Muqi

    2006-06-01

    To date, no pure bacterial cultures that could degrade acetochlor have been described. In this study, one strain of microorganism capable of degrading acetochlor, designated as LCa2, was isolated from acetochlor-contaminated soil. The strain LCa2 is Pseudomonas oleovorans according to the criteria of Bergey's manual of determinative bacteriology and sequence analysis of the partial 16S rRNA gene. Optimum growth temperature and pH were 35 degrees C and 8.0, respectively. The strain could degrade 98.03% of acetochlor treated at a concentration of 7.6 mg l(-1) after 7 days of incubation and could tolerate 200 mg l(-1) of acetochlor. When the acetochlor concentration became higher, the degradation cycle became longer. The acetochlor biodegradation products were identified by GC-MS based on mass spectral data and fragmentation patterns. The main plausible degradative pathways involved dechlorination, hydroxylation, N-dealkylation, C-dealkylation and dehydrogenation.

  19. Effects of acetochlor (herbicide) on the survival and avoidance ...

    African Journals Online (AJOL)

    Jane

    2011-07-06

    Jul 6, 2011 ... These results suggested that acetochlor residues had negligible effects on P. birmanica and L. terrestris. Michalkova and Pekar (2009) and Yardim and Edwards (1998) also reported negligible effects of herbicide (glyphosate) on Pardosa agrestis. Although, we also observed negligible effects of herbicide.

  20. Acetochlor in the hydrologic system in the midwestern United States, 1994

    Science.gov (United States)

    Kolpin, D.W.; Nations, B.K.; Goolsby, D.A.; Thurman, E.M.

    1996-01-01

    The herbicide acetochlor [2-chloro-N-(ethoxymethyl)-N-(2-ethyl-6-methylphenyl)acetamide] was given conditional registration in the United States by the U.S. Environmental Protection Agency in March 1994. This registration provided a rare opportunity to investigate the occurrence of a pesticide during its first season of extensive use in the midwestern United States. Water samples collected and analyzed by the U.S. Geological Survey during 1994 documented the distribution of acetochlor in the hydrologic system; it was detected in 29% of the rain samples from four sites in Iowa, 17% of the stream samples from 51 sites across nine states, and 0% of the groundwater samples from 38 wells across eight states. Acetochlor exhibited concentration increases in rain and streams following its application to corn in the midwestern United States, with 75% of the rainwater and 35% of the stream samples having acetochlor detected during this time period. Acetochlor concentrations in rain decreased as the growing season progressed. Based on the limited data collected for this study, it is anticipated that acetochlor concentrations will have a seasonal pattern in rain and streams similar to those of other acetanilide herbicides examined. Possible explanations for the absence of acetochlor in groundwater for this study include the rapid degradation of acetochlor in the soil zone, insufficient time for this first extensive use of acetochlor to have reached the aquifers sampled, and the possible lack of acetochlor use in the recharge areas for the wells examined.

  1. User instructions for levelized power generation cost codes using an IBM-type PC

    International Nuclear Information System (INIS)

    Coen, J.J.; Delene, J.G.

    1989-01-01

    Programs for the calculation of levelized power generation costs using an IBM or compatible PC are described. Cost calculations for nuclear plants and coal-fired plants include capital investment cost, operation and maintenance cost, fuel cycle cost, decommissioning cost, and total levelized power generation cost. 7 refs., 36 figs., 4 tabs

  2. Isolation, identification, and acetochlor-degrading potential of a novel Rhodococcus sp. MZ-3.

    Science.gov (United States)

    Zhang, Dou; Li, Zhiwei; Qiu, Jiguo; Ma, Yun; Zhou, Shanshan

    2016-10-02

    A new species of Rhodococcus, designated strain MZ-3, which could degrade acetochlor efficiently were isolated and identified. The isolate could degrade and utilize acetochlor as the sole source of carbon, nitrogen, and energy for growth. The optimal conditions for the degradation and growth of MZ-3 were pH 7.0 and 30°C. Under these conditions, this strain could completely degrade 200 mg/L of acetochlor within 12 h of incubation. During the biodegradation process, the enantioselectivity of the strain was investigated using a chiral high-performance liquid chromatography (HPLC) system. However, no obvious enantioselectivities were found. 2-chloro-N-(2-methyl-6-ethylphenyl) acetamide (CMEPA) was detected as the intermediate using liquid chromatography-mass spectrometry (LC-MS) analyses. Our results suggest that strain MZ-3 might be a promising microorganism for the bioremediation of acetochlor-contaminated environments because of its acetochlor-degrading performance.

  3. Comparison of Some Soil Fungi in Bioremediation of Herbicide Acetochlor Under Agitated Culture Media.

    Science.gov (United States)

    Erguven, Gokhan Onder

    2018-04-01

    In this study, we aimed to find out the biodegradation efficiency of some soil fungi types on herbicide acetochlor with acetochlor active material, chemical oxygen demand (COD), biochemical oxygen demand (BOD 5 ) and total organic carbon (TOC) parameters. We also try to determine the population dynamics of these fungi via turbidity. The fungi cultures were isolated from agricultural field in in Thrace region of Turkey. Each fungi enriched in malt extract broth media and 1 mL of these enriched media was inoculated into 100 mL of acetochlor solutions that suggested for using application concantrations in agricultural field for farmers (11000 mg L -1 ) for sunflower and corn agriculture. Bioremediation results of acetochlor have shown different results according to the types of fungi. Our results indicate that Tolypocladium geodes and Cordyceps cicadae might be used in acetochlor bioremediation with a significant acetochlor, COD, TOC and BOD 5 reduction and can be used for rehabilitation of agricultural fields or receiving environments for removal the opposite effects of acetochlor or other herbicides.

  4. SALP-PC - A fault tree code on personal computer for plant safety assessment

    International Nuclear Information System (INIS)

    Contini, S.; Poucet, A.

    1988-01-01

    The interactive program package SALP-PC for fault tree analysis, developed on an Olivetti M24 personal computer (IBM compatible), is written in Fortran-77 to guarantee the maximum portability. It is composed of five processors, implementing the different phases of the fault tree analysis procedure. Allowed logical operators are AND, OR, NOT, K/N, XOR and INH. Boundary conditions can also be defined to obtain fault trees conditioned to the state of one or more components. The possibility to define incompatible events is also allowed. An extensive check on input data is performed. At each step of the analysis the user can restart, with modified input parameters, without having to repeat the previous steps. The minimal cut sets (MCSs) are obtained by reducing the tree according to the bottom-up technique. To save computer time the approach of determining only the most significant MCSs has been adopted, which implies the assessment of an estimate of the contribution of the non significant MCSs to the system failure. Other methods have been implemented to reduce both computer time and memory space as, for instance, the modularization and the application of the minimization procedure only when strictly necessary. This paper contains the description of the main characteristics of the program, the analysis procedure on which it is based and the developments being carried out. (author). 2 refs, 3 figs, 1 tab

  5. [Residual levels of acetochlor in source water and drinking water of China's major cities].

    Science.gov (United States)

    Yu, Zhi-Yong; Jin, Fen; Li, Hong-Yan; An, Wei; Yang, Min

    2014-05-01

    The concentration levels of acetochlor were investigated in source water and drinking water from 36 major cities in China by solid phase extraction (SPE) combined with gas chromatography - mass spectrometry (GC-MS). Acetochlor detection rate was 66.9% in all the 145 source water samples collected with an average concentration of 33.9 ng L-1. The average removal rate of acetochlor was limited through the drinking water treatment process. The detection concentration of the northeast region was the highest. The concentrations of acetochlor detected in lake were higher than those in river and groundwater as source water. The detection rate and concentration of Liaohe river watershed and the coastal watershed were the highest.

  6. Determination of acetochlor in technical and formulated products by capillary gas chromatography: PVM 5:1999.

    Science.gov (United States)

    Kahn, B B; Tomkins, D F

    2001-01-01

    A peer-verified gas chromatographic (GC) method is presented for the weight percent (wt %) determination of acetochlor herbicide in technical and formulated products. During method development, the method was found to be rugged by the Youden Ruggedness Test. Two laboratories with experience in the wt % determination of acetochlor in various matrixes participated in this study. Each laboratory received 10 blind duplicate test samples of the following 5 matrixes: one acetochlor technical and 4, different, emulsifiable concentrate (EC) formulations--Harness EC (MON 5841), Harness Export/Fist (MON 8435), Surpass EC (HF), and Surpass EC (LF). Each participant was asked to make duplicate weighings of each of the test samples and to inject each test sample solution twice. All test samples were analyzed on the same day, and 8 data points (replicates) per matrix were obtained. The test samples were dissolved in acetone that contained dipentyl phthalate as an internal standard. They were analyzed by GC on a 15 m capillary column by using split injection and a flame ionization detector. Acetochlor (wt %) was determined by comparing the ratios of peak area of acetochlor/peak area of dipentyl phthalate internal standard obtained for the test sample and calibration solutions. Repeatability of the method, expressed as the within-laboratory (between replicates) relative standard deviation (RSDr), was found to be 0.09-0.77% for the 5 matrixes. Reproducibility of the method, expressed as the within-test sample relative standard deviation (RSDR), was found to be 0.18-0.78% for the

  7. [Single and binary-combined toxicity of methamidophos, acetochlor and Cu on earthworm Eisenia foetida].

    Science.gov (United States)

    Liang, Jidong; Zhou, Qixing

    2003-04-01

    A population of earthworm Eisenia foetida was exposed to single and binary-combined contamination of phaeozem by methamidophos, acetochlor and Cu. The result showed that one of three test chemicals had its toxicity on the earthworm population, and the single toxic sequence of the chemicals was acetochlor > methamidophos > Cu. The values of their LD50 were 0.307, 0.708 and 118.70 mg.kg-1, respectively. The difference was depended on the biological mechanisms of the earthworm population. Acetochlor and Cu in soil could be absorbed by the earthworm population through penetrating through the skin of an earthworm. The result also showed that Cu could swell the toxicity of methamidophos, whether it was in low or high concentration by the binary-combined toxic effect test. Cu in low concentration could decrease the toxicity of acetochlor, but in high concentration, Cu could increase the acetochlor toxicity in soil. Therefore, these three pollutants were dangerous to the ecological security of soil ecosystem and soil-health quality. Furthermore, when the chemicals in same soil environment act one another, they could boost up the potential danger of soil ecosystem contaminated by the three pollutants. The joint toxic effects of various chemicals were in relation to their different concentration combinations in soil.

  8. Bidirectional promoters link cAMP signaling with irreversible differentiation through promoter-associated non-coding RNA (pancRNA) expression in PC12 cells

    Science.gov (United States)

    Yamamoto, Naoki; Agata, Kiyokazu; Nakashima, Kinichi; Imamura, Takuya

    2016-01-01

    Abstract Bidirectional promoters are the major source of gene activation-associated noncoding RNA (ncRNA). PC12 cells offer an interesting model for understanding the mechanism underlying bidirectional promoter-mediated cell cycle control. Nerve growth factor (NGF)-stimulated PC12 cells elongate neurites, and are in a reversible cell-cycle-arrested state. In contrast, these cells irreversibly differentiate and cannot re-enter the normal cell cycle after NGF plus cAMP treatment. In this study, using directional RNA-seq, we found that bidirectional promoters for protein-coding genes with promoter-associated ncRNA (pancRNA) were enriched for cAMP response element consensus sequences, and were preferred targets for transcriptional regulation by the transcription factors in the cAMP-dependent pathway. A spindle-formation-associated gene, Nusap1 and pancNusap1 were among the most strictly co-transcribed pancRNA–mRNA pairs. This pancRNA–mRNA pair was specifically repressed in irreversibly differentiated PC12 cells. Knockdown (KD) and overexpression experiments showed that pancNusap1 positively regulated the Nusap1 expression in a sequence-specific manner, which was accompanied by histone acetylation at the Nusap1 promoter. Furthermore, pancNusap1 KD recapitulated the effects of cAMP on cell cycle arrest. Thus, we conclude that pancRNA-mediated histone acetylation contributes to the establishment of the cAMP-induced transcription state of the Nusap1 locus and contributes to the irreversible cell cycle exit for terminal differentiation of PC12 cells. PMID:26945044

  9. Effects of prometryn and acetochlor on arbuscular mycorrhizal fungi and symbiotic system.

    Science.gov (United States)

    Li, X; Miao, W; Gong, C; Jiang, H; Ma, W; Zhu, S

    2013-08-01

    Prometryn and acetochlor are common herbicides widely used to control weeds in agricultural systems. The impacts of the two herbicides on spore germination, hyphal elongation, the biomass and malondialdehyde content of carrot hairy roots were investigated using a strict in vitro cultivation system associating the Ri T-DNA-transferred carrot hairy roots with Glomus etunicatum. Alternatively, root colonization, daughter spore production and the proportion of hyphae with succinate dehydrogenase (SDH) and alkaline phosphatase (ALP) activities were also investigated. No significant impact on spore germination was noted in the presence of acetochlor at all three concentrations tested, while a significant decrease was observed with prometryn only at the highest concentration. Moreover, an inverse correlation was identified between herbicides concentrations and G. etunicatum root colonization and spore production as well as hyphal SDH and ALP activity, with a positive correlation identified among these four factors. Both herbicides exerted negative effects on the arbuscular mycorrhizal (AM) fungus and symbiosis at increasing concentrations, with prometryn apparently more toxic than acetochlor. Furthermore, the AM symbiotic system was shown to improve biomass, reduce malondialdehyde accumulation and ease lipid peroxidation in carrot hairy roots and decrease damage in host plants, thus enhancing plant tolerance to adverse conditions. In this study, the effect of prometryn and acetochlor on the physiology and metabolic activities of the AM fungus Glomus etunicatum were investigated. Our findings demonstrate for the first time, the impact of the two herbicides at three concentrations (0.1, 1 and 10 mg l(-1)) on transformed carrot hairy roots/AM fungus association under strict in vitro culture conditions, which may guide the application of the two herbicides in modern agriculture. © 2013 The Society for Applied Microbiology.

  10. Simulation of radiation dose rate distributions around casks in ships and vehicles by using QBF code for PC-9801 computer

    International Nuclear Information System (INIS)

    Yamakoshi, Hisao

    1993-01-01

    The main aim of the present report is to show that the behavior of the spatial distribution of the radiation dose rate in a wide region can be easily visualized in various aspects of cask shipment even by personal computers which are very popular today, and that the QBF code system is a useful tool to perform this simulation. A great merit of using this code system is that one can easily analyze, with high reliability, roles of various important factors such as shielding structures and cask positions in the behavior of dose rate distributions. (J.P.N.)

  11. Controle de plantas daninhas na cultura da soja através do herbicida acetochlor em sistemas de semeadura direta e preparo convencional Weed control in soybean crop using the herbicide acetochlor under direct seeding and conventional system

    Directory of Open Access Journals (Sweden)

    M.V.W. Ferri

    2002-08-01

    Full Text Available O manejo do solo altera a bioatividade dos herbicidas residuais e influi na persistência, na eficácia de controle das plantas daninhas e na fitotoxicidade para as culturas. Um experimento foi conduzido na Faculdade de Agronomia da Universidade Federal do Rio Grande do Sul, com objetivo de avaliar a eficácia de controle das plantas daninhas pelo herbicida acetochlor aplicado em solo Argissolo Vermelho sob semeadura direta e preparo convencional. O delineamento experimental foi o de blocos casualizados com quatro repetições em parcelas subsubdivididas. O acetochlor foi utilizado nas doses de 0, 1.680, 2.520, 3.360 e 4.200 g ha¹. Foi avaliado o controle das plantas daninhas aos 15, 30 e 45 dias após aplicação do acetochlor (DAT. Foram avaliados também a injúria na cultura da soja aos 14, 21 e 28 DAT e a matéria seca das plantas daninhas aos 40 e 60 DAT. O herbicida acetochlor foi mais eficiente no controle das plantas daninhas no solo sob preparo convencional que sob semeadura direta. A produção de matéria seca dessas plantas foi menor no preparo convencional comparado à semeadura direta. Não ocorreu injúria à cultura da soja.Soil management affects herbicide bioactivity and changes persistence, weed control and crop selectivity. An experiment was carried out at the Federal University of Rio Grande do Sul - Brazil, to evaluate the efficacy of the herbicide acetochlor in controling weeds in a Paleudult soil under direct seeding and conventional system. The following treatments were tested: acetochlor at 0, 1,680, 2,520, 3,360 and 4,200 g ha-1, applied under tillage and no-till systems. Assessments included crop injury at 14, 21 and 28 days after acetochlor aplication, weed dry matter at 40 and 60 days after herbicide aplication and weed control at 15, 30 and 45 days after acetochlor aplication. Acetochlor was more efficient under conventional than direct seeding system. Weed dry biomass was lower under conventional than direct

  12. OFFSCALE: A PC input processor for the SCALE code system. The ORIGNATE processor for ORIGEN-S

    International Nuclear Information System (INIS)

    Bowman, S.M.

    1994-11-01

    OFFSCALE is a suite of personal computer input processor programs developed at Oak Ridge National Laboratory to provide an easy-to-use interface for modules in the SCALE-4 code system. ORIGNATE is a program in the OFFSCALE suite that serves as a user-friendly interface for the ORIGEN-S isotopic generation and depletion code. It is designed to assist an ORIGEN-S user in preparing an input file for execution of light-water-reactor (LWR) fuel depletion and decay cases. ORIGNATE generates an input file that may be used to execute ORIGEN-S in SCALE-4. ORIGNATE features a pulldown menu system that accesses sophisticated data entry screens. The program allows the user to quickly set up an ORIGEN-S input file and perform error checking. This capability increases productivity and decreases the chance of user error

  13. PC communication

    International Nuclear Information System (INIS)

    Oh, Jae Cheol

    1992-03-01

    This text book is comprised of five charters, which is about PC communication for beginners who need to learn manners and how to use Ketel and PC serve. So it introduces first, conception of PC and precautions on using PC communication, second, preparation for PC communication with Modem, its program, install, kinds of protocol and how to use protocol, third directions of emulator of PC communication and super session, fourth, instruction of Ketel with join and access, basic command of Ketel, list of Ketel's menu, Ketel editor, service guide, directions of News service, Stock and bond service business and economic figures, exchange rate and interest rate, tax culture and leisure, Ketel BBS service and posting. The last part has a instruction of PC-serve about join, basic command of PC-serve, service guide and practical guideline.

  14. OFFSCALE: A PC input processor for the SCALE code system. The CSASIN processor for the criticality sequences

    International Nuclear Information System (INIS)

    Bowman, S.M.

    1994-11-01

    OFFSCALE is a suite of personal computer input processor programs developed at Oak Ridge National Laboratory to provide an easy-to-use interface for modules in the SCALE-4 code system. CSASIN (formerly known as OFFSCALE) is a program in the OFFSCALE suite that serves as a user-friendly interface for the Criticality Safety Analysis Sequences (CSAS) available in SCALE-4. It is designed to assist a SCALE-4 user in preparing an input file for execution of criticality safety problems. Output from CSASIN generates an input file that may be used to execute the CSAS control module in SCALE-4. CSASIN features a pulldown menu system that accesses sophisticated data entry screens. The program allows the user to quickly set up a CSAS input file and perform data checking. This capability increases productivity and decreases the chance of user error

  15. Simulations of cloudy hyperspectral infrared radiances using the HT-FRTC, a fast PC-based multipurpose radiative transfer code

    Science.gov (United States)

    Havemann, S.; Aumann, H. H.; Desouza-Machado, S. G.

    2017-12-01

    The HT-FRTC uses principal components which cover the spectrum at a very high spectral resolution allowing very fast line-by-line-like, hyperspectral and broadband simulations for satellite-based, airborne and ground-based sensors. Using data from IASI and from the Airborne Research Interferometer Evaluation System (ARIES) on board the FAAM BAE 146 aircraft, variational retrievals in principal component space with HT-FRTC as forward model have demonstrated that valuable information on temperature and humidity profiles and on the cirrus cloud properties can be obtained simultaneously. The NASA/JPL/UMBC cloudy RTM inter-comparison project has been working on a global dataset consisting of 7377 AIRS spectra. Initial simulations with HT-FRTC for this dataset have been promising. A next step taken here is to investigate how sensitive the results are with respect to different assumptions in the cloud modelling. One aspect of this is to study how assumptions about the microphysical and related optical properties of liquid/ice clouds impact the statistics of the agreement between model and observations. The other aspect is about the cloud overlap scheme. Different schemes have been tested (maximum, random, maximum random). As the computational cost increases linearly with the number of cloud columns, it will be investigated if there is an optimal number of columns beyond which there is little additional benefit to be gained. During daytime the high wave number channels of AIRS are affected by solar radiation. With full scattering calculations using a monochromatic version of the Edwards-Slingo radiation code the HT-FRTC can model solar radiation reasonably well, but full scattering calculations are relatively expensive. Pure Chou scaling on the other hand can not properly describe scattering of solar radiation by clouds and requires additional refinements.

  16. Sorption of atrazine, acetochlor, and 2,4-D by hardwood-derived biochar

    Science.gov (United States)

    Gonzalez, J. M.; Shipitalo, M. J.

    2016-12-01

    Offsite transport of herbicides and other agricultural pesticides to streams and other bodies of water can adversely impact drinking water supplies and aquatic ecology. Atrazine, acetochlor, and 2,4-D are herbicides commonly used to control weeds in maize (Zea mays) and soybean (Glycine max), the dominant crops in the U.S. Midwest. Unfortunately, these materials are frequently detected at high concentrations in surface runoff and subsurface drainage, especially when rainstorms occur shortly after their application. Thus, edge-of-field technologies employing effective sorbents to remove pesticides in water are needed to reduce this concern. In this study, we investigated the sorption of atrazine, acetochlor, and 2,4-D by a hardwood-derived biochar. Sorption kinetics and isotherms were determined for each pesticide using concentrations ranging from 5 to 100 ug L-1. The results from the kinetic sorption studies were fitted to pseudo first- and second-order reaction models and demonstrated that sorption was fast; in less than an hour > 90% of the added pesticides were sorbed and after 24 hours up to 100% was removed. The pH of the suspensions after the sorption kinetic and isotherm studies was 8.26 ± 0.51. Thus, because of the nature of the biochar and the pesticides used in this study, hydrophobic interactions appear to be the main mechanism of sorption. Furthermore, since the sorption was fast, we hypothesize that sorption occurred on the surface of biochar. The information from this study can be used to develop agricultural best management practices to remove pesticides in water.

  17. The decreasing of corn root biomembrane penetration for acetochlor with vermicompost amendment

    Science.gov (United States)

    Sytnyk, Svitlana; Wiche, Oliver

    2016-04-01

    One of the topical environmental security issues is management and control of anthropogenic (artificially synthesized) chemical agents usage and utilization. Protection systems development against toxic effects of herbicides should be based on studies of biological indication mechanisms for identification of stressors effect in organisms. Lipid degradation is non-specific reaction to exogenous chemical agents effects. Therefore it is important to study responses of lipid components depending on the stressor type. We studied physiological and biochemical characteristics of lipid metabolism under action of herbicides of chloracetamide group. Corn at different stages of ontogenesis was used as testing object during model laboratory and microfield experiments. Cattle manure treated with earth worms Essenia Foetida was used as compost fertilizer to add to chain: chernozem (black soil) -corn system. It was found several acetochlor actions as following: -decreasing of sterols, phospholipids, phosphatidylcholines and phosphatidylethanolamines content; -increasing pool of available fatty acids and phosphatidic acids associated with intensification of hydrolysis processes; -lypase activity stimulation under effect of stressor in low concentrations; -lypase activity inhibition under effect of high stressor level; -decreasing of polyenoic free fatty acids indicating biomembrane degradation; -accumulation of phospholipids degradation products (phosphatidic acids); -decreasing of high-molecular compounds (phosphatidylcholin and phosphatidylinositol) concentrations; -change in the index of unsaturated and saturated free fatty acids ratio in biomembranes structure; It was established that incorporation of vermicompost in dose 0.4 kg/m2 in black soil lead to corn roots biomembrane restoration. It was fixed the decreasing roots biomembrane penetration for acetochlor in trial with vermicompost. Second compost substances antidote effect is the soil microorganism's activation

  18. PC Pricer

    Data.gov (United States)

    U.S. Department of Health & Human Services — The PC Pricer is a tool used to estimate Medicare PPS payments. The final payment may not be precise to how payments are determined in the Medicare claims processing...

  19. Utilização de acetochlor e atrazine aplicados em mistura de tanque com dessecantes no sistema de plantio direto Reaction of the herbicides acetochlor and atrazine applied in tank mixtures with desiccants in no-till system

    Directory of Open Access Journals (Sweden)

    Benedito N. Rodrigues

    2000-08-01

    Full Text Available A mistura em tanque de herbicidas dessecantes com residuais tem sido utilizada com frequencia pelos agricultores no sistema de plantio direto. Sabe-se, no entanto, que alguns herbicidas residuais têm problemas de retenção na palha quando utilizados isoladamente em préemergência nesse sistema. O objetivo do presente trabalho, foi estudar o comportamento dos herbicidas residuais atrazine e acetochlor em mistura com dessecantes no manejo em plantio direto. Para tal, foi instalado um experimento em blocos ao acaso com parcelas subdivididas e quatro repetições. Os tratamentos, alocados na parcela, em número de nove, foram constituidos pelas seguintes misturas de herbicidas: 1 acetochlor + glyphosate; 2 acetochlor + glyphosate + 2,4D; 3 acetochlor + paraquat; 4 acetochlor + paraquat + 2,4D; 5 atrazine + glyphosate; 6 atrazine + glyphosate + 2,4D; 7 atrazine + paraquat; 8 atrazine + óleo vegetal; 9 testemunha não tratada. Os tratamentos da sub parcela, em número de dois, foram constituidos pelas modalidades de aplicação dos herbicidas na cobertura vegetal: 1 aplicação com a cobertura "em pé"; 2 aplicação com a cobertura "rolada". A cobertura vegetal de inverno era formada pela consorciação de aveia-preta + ervilhaca comum. Os resultados mostraram que o controle de Brachiaria plantaginea, Euphorbia heterophylla e Bidens pilosa foi melhor efetuado com os tratamentos onde entrou o atrazine. De maneira geral, o controle obtido na modalidade "em pé," foi melhor do que na modalidade "rolada," principalmente nos tratamentos com acetochlor. A análise cromatográfica de resíduos feita em amostras de solo retiradas do experimento antes e após uma chuva de 41mm ocorrida 24 horas após a aplicação dos tratamentos, mostrou que menos de 6 % do acetochlor aplicado foi detectado no solo, em ambas as modalidades de aplicação. Quanto ao atrazine, no entanto, mais de 78 % do total aplicado foi detectado no solo após a chuva na modalidade

  20. ELIPGRID-PC: Upgraded version

    International Nuclear Information System (INIS)

    Davidson, J.R.

    1995-12-01

    Evaluating the need for and the effectiveness of remedial cleanup at waste sites often includes finding average contaminant concentrations and identifying pockets of contamination called hot spots. The standard tool for calculating the probability of detecting pockets of contamination called hot spots has been the ELIPGRID code of singer and Wickman. The ELIPGRID-PC program has recently made this algorithm available for an IBM reg-sign personal computer (PC) or compatible. A new version of ELIPGRID-PC, incorporating Monte Carlo test results and simple graphics, is herein described. Various examples of how to use the program for both single and multiple hot spot cases are given. The code for an American National Standards Institute C version of the ELIPGRID algorithm is provided, and limitations and further work are noted. This version of ELIPGRID-PC reliably meets the goal of moving Singer's ELIPGRID algorithm to the PC

  1. Involvement of the Cytochrome P450 System EthBAD in the N-Deethoxymethylation of Acetochlor by Rhodococcus sp. Strain T3-1

    Science.gov (United States)

    Wang, Fei; Zhou, Jie; Li, Zhoukun; Dong, Weiliang; Hou, Ying; Huang, Yan

    2015-01-01

    Acetochlor [2-chloro-N-(ethoxymethyl)-N-(2-ethyl-6-methylphenyl)-acetamide] is a widely applied herbicide with potential carcinogenic properties. N-Deethoxymethylation is the key step in acetochlor biodegradation. N-Deethoxymethylase is a multicomponent enzyme that catalyzes the conversion of acetochlor to 2′-methyl-6′-ethyl-2-chloroacetanilide (CMEPA). Fast detection of CMEPA by a two-enzyme (N-deethoxymethylase–amide hydrolase) system was established in this research. Based on the fast detection method, a three-component enzyme was purified from Rhodococcus sp. strain T3-1 using ammonium sulfate precipitation and hydrophobic interaction chromatography. The molecular masses of the components of the purified enzyme were estimated to be 45, 43, and 11 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Based on the results of peptide mass fingerprint analysis, acetochlor N-deethoxymethylase was identified as a cytochrome P450 system, composed of a cytochrome P450 oxygenase (43-kDa component; EthB), a ferredoxin (45 kDa; EthA), and a reductase (11 kDa; EthD), that is involved in the degradation of methyl tert-butyl ether. The gene cluster ethABCD was cloned by PCR amplification and expressed in Escherichia coli BL21(DE3). Resting cells of a recombinant E. coli strain showed deethoxymethylation activity against acetochlor. Subcloning of ethABCD showed that ethABD expressed in E. coli BL21(DE3) has the activity of acetochlor N-deethoxymethylase and is capable of converting acetochlor to CMEPA. PMID:25595756

  2. Determination of Atrazine, Acetochlor, Clomazone, Pendimethalin and Oxyfluorfen in Soil by a Solid Phase Microextraction Method

    Directory of Open Access Journals (Sweden)

    Rada Đurović

    2008-01-01

    Full Text Available A solid phase microextraction (SPME method for simultaneous determination of atrazine, acetochlor, clomazone, pendimethalin and oxyfluorfen in soil samples was developed. The method is based on a combination of conventional liquid-solid procedure and a following SPME determination of the selected pesticides. Initially, various microextraction conditions, such as the fibre type, desorption temperature and time, extraction time and NaCl content, were investigated and optimized. Then, extraction efficiencies of severalsolvents (water, hexane, acetonitrile, acetone and methanol and the optimum number of extraction steps within the sample preparation step were optimized. According to the results obtained in these two sets of experiments, two successive extractions with methanol as the extraction solvent were the optimal sample preparation procedure, while the following conditions were found to be most efficient for SPME measurements: 100 μm PDMS fibre, desorption for 7 min at 2700C, 30 min extraction time and 5% NaCl content (w/v. Detection and quantification were done by gas chromatography-mass spectrometry(GC/MS. Relative standard deviation (RSD values for multiple analysis of soil samples fortified at 30 μg/kg of each pesticide were below 19%. Limits of detection (LOD for all the compounds studied were less than 2 μg/kg.

  3. Identification and Functional Characterization of G6PC2 Coding Variants Influencing Glycemic Traits Define an Effector Transcript at the G6PC2-ABCB11 Locus

    DEFF Research Database (Denmark)

    Mahajan, Anubha; Sim, Xueling; Ng, Hui Jin

    2015-01-01

    . To test this, we analyzed exome-array data from up to 33,231 non-diabetic individuals of European ancestry. We found exome-wide significant (P1R (p.Ala316Thr, minor allele frequency (MAF)=1.5%) influencing FG levels...... and functional effects was only possible when haplotype phase was considered. In contrast to earlier reports suggesting that, paradoxically, glucose-raising alleles at this locus are protective against type 2 diabetes (T2D), the p.Val219Leu G6PC2 variant displayed a modest but directionally consistent......Genome wide association studies (GWAS) for fasting glucose (FG) and insulin (FI) have identified common variant signals which explain 4.8% and 1.2% of trait variance, respectively. It is hypothesized that low-frequency and rare variants could contribute substantially to unexplained genetic variance...

  4. Atividade de glutationa S-transferase na metabolização de acetochlor, atrazine e oxyfluorfen em milho (Zea mays L., sorgo (Sorghum bicolor L. e trigo (Triticum aestivum L. (Poaceae Glutathione S-transferase activity in acetochlor, atrazine and oxyfluorfen metabolization in maize (Zea mays L., sorghum (Sorghum bicolor L. and wheat (Triticum aestivumL. (Poaceae

    Directory of Open Access Journals (Sweden)

    Ethel Lourenzi Barbosa Novelli

    2002-05-01

    Full Text Available Este experimento foi conduzido para avaliar a seletividade em plantas dos herbicidas acetochlor, atrazine e oxyfluorfen em relação à atividade da glutationa S-transferase (GST em plantas de milho (Zea mays L., sorgo (Sorghum bicolor L. e trigo (Triticum aestivum L. (Poaceae. A atividade da GST foi detectada às 24, 48 e 72 horas após as aplicaç��es dos tratamentos. Os tratamentos do experimento consistiram de aplicação com água (controle, acetochlor (3 L.ha-1, atrazine (4 L.ha-1 e oxyfluorfen (1 L.ha-1. As maiores atividades de GST foram observadas na presença de acetochlor, principalmente às 48 horas após o tratamento. Esses aumentos foram 105, 148 e 118% em relação ao controle para milho, sorgo e trigo, respectivamente. É sugerido que a GST pode ter papel na degradação de acetochlor e pode ser uma das razões para a seletividade desse herbicida para essas culturas.This experiment was conducted to evaluate the acetochlor, atrazine and oxyfluorfen herbicides plant selectivity, in relation to glutathione S-transferase activity (GST in maize (Zea mays L., sorghum (Sorghum bicolor L. and wheat (Triticum aestivum L (Poaceae plants. GST activity was detected 24, 48 and 72 hours after treatment applications. The experiment's treatments consisted of spraying plants with water (control, acetochlor (3 L.ha-1`, atrazine (4 L.ha-1 and oxyfluorfen (1 L.ha-1. The highest GST activities were observed in presence of acetochlor, mainly at 48 hours after treatment. These increments were 105, 148 and 118% when compared to maize, sorghum and wheat control groups, respectively. It is suggested that the GST may have a role in acetochlor degradation and it may be a reason for this herbicide's selectivity in these crops.

  5. Eficácia do herbicida acetochlor na semeadura direta e convencional com ou sem palha e os efeitos sobre o rendimento do milho Acetochlor herbicide efficacy on tillage and no-tillage systems on straw mulch presence or absence and effect on corn yield

    Directory of Open Access Journals (Sweden)

    Miguel Vicente Weiss Ferri

    2004-04-01

    Full Text Available O experimento foi conduzido na Faculdade de Agronomia da Universidade Federal do Rio Grande do Sul, ano agrícola de 2000/2001, com o objetivo de avaliar a eficácia de controle das plantas daninhas com o herbicida acetochlor em Argissolo Vermelho, conduzido sob semeadura direta e preparo convencional, na presença ou ausência de palha. O delineamento experimental utilizado foi blocos casualizados com quatro repetições. Os tratamentos constaram de acetochlor nas doses de 0, 1680, 3360 e 5040g ha-1, aplicado em solo sob semeadura direta e preparo convencional, na presença (4,5t ha-1 ou ausência de palha de aveia. Foram avaliados o controle das plantas daninhas, além da altura de plantas e rendimento de grãos de milho. O acetochlor foi mais eficiente para o controle das plantas daninhas no preparo convencional, comparado à semeadura direta. A palha reduziu a eficácia de controle pelo acetochlor. A altura das plantas de milho foi maior na semeadura direta. O rendimento de grãos de milho foi maior no preparo convencional e na presença da palha devido ao melhor controle das plantas daninhas.An experiment was carried out at Federal University at Rio Grande do Sul, with the objective of avaluating herbicide acetochlor efficacy on conventional tillage and no-till soils. The soil is classified as at Paleudult. The following treatments were tested: acetochlor at 0, 1680, 3360 and 5040g ha-1, applied on tillage and no-tillage systems on oat straw mulch presence (4,5t ha-1 and absence. Assessements included crop injury, weed control at 15, 30 and 45 days after herbicide application, and corn crop yeld. The weed control with acetochlor herbicide was more efficient on tillage than on no-tillage system. Straw mulch reduced acetochlor herbicide weed control. Corn plant height was higher on no-tillage than on tillage systems, indicating lower herbicide activity on the first. Corn yield was higher on tillage system and straw mulch presence, due to

  6. Biomimicry 1: PC.

    Science.gov (United States)

    Cumberland, D C; Gunn, J; Malik, N; Holt, C M

    1998-01-01

    The surface properties of stents can be modified by coating them, for example with a polymer. Phosphorylcoline (PC) is the major component of the outer layer of the cell membrane. The haemo- and biocompatibility of a PC-containing polymer is thus based on biomimicry, and has been confirmed by several experiments showing much reduced thrombogenicity of PC-coated surfaces, and porcine coronary artery implants showing no sign of adverse effect. Clinical experience with the PC-coated BiodivYsio appears favourable. The PC coating can be tailored for take up and controlled elution of various drugs for stent-based local delivery, a property which is being actively explored.

  7. PC clusters at CERN's PC farm

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    These Linux-based PC clusters are mainly used for batch and interactive data processing. When the LHC starts operation in 2008, it will produce enough data every year to fill a stack of CDS 20 km tall, so high quality processing is required. To further facilitate this the LHC Computing Grid (LCG) has been set up to share processing power between facilities around the world.

  8. The PC graphics handbook

    CERN Document Server

    Sanchez, Julio

    2003-01-01

    Part I - Graphics Fundamentals PC GRAPHICS OVERVIEW History and Evolution Short History of PC Video PS/2 Video Systems SuperVGA Graphics Coprocessors and Accelerators Graphics Applications State-of-the-Art in PC Graphics 3D Application Programming Interfaces POLYGONAL MODELING Vector and Raster Data Coordinate Systems Modeling with Polygons IMAGE TRANSFORMATIONS Matrix-based Representations Matrix Arithmetic 3D Transformations PROGRAMMING MATRIX TRANSFORMATIONS Numeric Data in Matrix Form Array Processing PROJECTIONS AND RENDERING Perspective The Rendering Pipeline LIGHTING AND SHADING Lightin

  9. Leo II PC

    Data.gov (United States)

    Kansas Data Access and Support Center — LEO II is a second-generation software system developed for use on the PC, which is designed to convert location references accurately between legal descriptions and...

  10. Building the perfect PC

    CERN Document Server

    Thompson, Robert Bruce

    2006-01-01

    This popular Build-It-Yourself (BIY) PC book covers everything you want to know about building your own system: Planning and picking out the right components, step-by-step instructions for assembling your perfect PC, and an insightful discussion of why you'd want to do it in the first place. Most big brand computers from HP, Dell and others use lower-quality components so they can meet their aggressive pricing targets. But component manufacturers also make high-quality parts that you can either purchase directly, or obtain through distributors and resellers. Consumers and corporations

  11. Determination of Low Concentrations of Acetochlor in Water by Automated Solid-Phase Extraction and Gas Chromatography with Mass-Selective Detection

    Science.gov (United States)

    Lindley, C.E.; Stewart, J.T.; Sandstrom, M.W.

    1996-01-01

    A sensitive and reliable gas chromatographic/mass spectrometric (GC/MS) method for determining acetochlor in environmental water samples was developed. The method involves automated extraction of the herbicide from a filtered 1 L water sample through a C18 solid-phase extraction column, elution from the column with hexane-isopropyl alcohol (3 + 1), and concentration of the extract with nitrogen gas. The herbicide is quantitated by capillary/column GC/MS with selected-ion monitoring of 3 characteristic ions. The single-operator method detection limit for reagent water samples is 0.0015 ??g/L. Mean recoveries ranged from about 92 to 115% for 3 water matrixes fortified at 0.05 and 0.5 ??g/L. Average single-operator precision, over the course of 1 week, was better than 5%.

  12. Beware the PC Police.

    Science.gov (United States)

    Cheney, Lynne V.

    1992-01-01

    Decries the prevalence of "racism,""sexual harassment," and "speciesism" labels applied to supposed violators of "political correctness" (PC). When freedom of speech on college campuses is held hostage to political correctness, K-12 education is bound to be affected. This new brand of McCarthyism cheapens…

  13. Sorção do herbicida acetochlor em amostras de solo, ácidos húmicos e huminas de argissolo submetido à semeadura direta e ao preparo convencional Sorption of acetochlor herbicide by soil samples, humic acids and humin from an argisol under no-till and conventional tillage systems

    Directory of Open Access Journals (Sweden)

    Miguel Vicente Weiss Ferri

    2005-10-01

    Full Text Available A sorção de herbicidas no solo é um dos processos determinantes na sua dinâmica no ambiente. Para compostos fracamente polares, como é caso do acetochlor, a matéria orgânica do solo constitui o principal sorvente. O objetivo deste estudo foi avaliar a sorção de acetochlor em amostras de solo, de ácidos húmicos e de huminas de um Argissolo Vermelho distrófico (PVd submetido à semeadura direta e ao preparo convencional. Isotermas de sorção foram obtidas em temperatura ambiente e a concentração do herbicida foi determinada por cromatografia líquida de alta eficiência. As amostras de solo foram caracterizadas pelos teores de C orgânico e de substâncias húmicas; os ácidos húmicos e huminas foram caracterizados por análise elementar. A capacidade de sorção de acetochlor foi superior no solo de semeadura direta (Kd = 1,22 ± 0,11 L kg-1, K OC = 116 ± 10 L kg-1 C em relação ao preparo convencional (Kd = 0,76 ± 0,08 L kg-1, K OC = 86 ± 8 L kg-1 C. Este comportamento foi relacionado, em parte, com o maior teor de C no solo tratado com semeadura direta. Nos ácidos húmicos de preparo convencional, a sorção (Kd = 178 ± 18,9 L kg-1, K OC = 352 ± 37 L kg-1C foi similar à verificada nos ácidos húmicos de semeadura direta (Kd = 158 ± 14,6 L kg-1, K OC = 321 ± 30 L kg-1 C; situação semelhante foi observada com as huminas. Dentre as frações húmicas avaliadas, as huminas apresentaram maior capacidade de sorção (Kd = 1.028 e 1.183 L kg-1, K OC = 2.691 e 2.892 L kg-1 C.The sorption of herbicides to soil is a process determinant of its dynamics in the environment. For weakly polar compounds such as acetochlor, organic matter represents the main sorbent in soil. The goal of this study was to evaluate the sorption of acetochlor on soil samples, humic acids and humin from an "Argissolo Vermelho distrófico" (PVd-Paleudult under no-till and conventional tillage systems. Sorption isotherms were carried out at room

  14. NASA PC software evaluation project

    Science.gov (United States)

    Dominick, Wayne D. (Editor); Kuan, Julie C.

    1986-01-01

    The USL NASA PC software evaluation project is intended to provide a structured framework for facilitating the development of quality NASA PC software products. The project will assist NASA PC development staff to understand the characteristics and functions of NASA PC software products. Based on the results of the project teams' evaluations and recommendations, users can judge the reliability, usability, acceptability, maintainability and customizability of all the PC software products. The objective here is to provide initial, high-level specifications and guidelines for NASA PC software evaluation. The primary tasks to be addressed in this project are as follows: to gain a strong understanding of what software evaluation entails and how to organize a structured software evaluation process; to define a structured methodology for conducting the software evaluation process; to develop a set of PC software evaluation criteria and evaluation rating scales; and to conduct PC software evaluations in accordance with the identified methodology. Communication Packages, Network System Software, Graphics Support Software, Environment Management Software, General Utilities. This report represents one of the 72 attachment reports to the University of Southwestern Louisiana's Final Report on NASA Grant NGT-19-010-900. Accordingly, appropriate care should be taken in using this report out of context of the full Final Report.

  15. Conical Nanopore PC Membranes

    International Nuclear Information System (INIS)

    Clochard, M. C.

    2006-01-01

    Template synthesis can be considered an alternative to conventional lithography methods. It is one way of providing a panel of nanoscale metallic wires, tubes or organic polymeric devices. Our interest is focused on track-etched membranes produced from swift heavy ions bombardment of polymer films. In comparison with self-assembly of block copolymers, this bottom-up approach has the advantage of being economic, it is not time-consuming and it allows track formation of diverse geometries. Tailoring of the conical nanopore tip opening would have a tremendous impact on sensing domain, as well as on fundamental understanding of perpendicular giant magneto Resistance properties observed in metallic multilayered cylindrical nanowires. By combining low-energy heavy ion beam radiation effects with asymmetric etching, the etching temperature and time can be tuned to prepare conical nanopores of controlled geometry from 0.5 to 1μm at the base to a few nanometers at the top. Asymmetric etching onto PC films was pH-monitored at various temperatures in the range of 65 degree to 80 degree. Fluence impact onto track etch pores was also investigated. The pore shape characterization was achieved by electronic microscopy measurements on membrane surfaces and on electrodeposited nanowires. We have also observed a difference in the conical shape of replicated nanowires. Some showed sting shapes and others displayed shell shapes depending on whether a neutralizing agent was used during etching or not

  16. Qualification plan for the Genmod-PC computer program

    International Nuclear Information System (INIS)

    Richardson, R.B.; Wright, G.M.; Dunford, D.W.; Linauskas, S.H.

    2002-07-01

    Genmod-PC is an internal dosimetry code that uses Microsoft Windows operating system, and that currently calculates radionuclide doses and intakes for an adult male. This report provides a plan for specifying the quality assurance measures that conform to the recommendations of the Canadian Standards Association, as well as AECL procedural requirements for a legacy computer program developed at AECL. (author)

  17. ELIPGRID-PC: A PC program for calculating hot spot probabilities

    International Nuclear Information System (INIS)

    Davidson, J.R.

    1994-10-01

    ELIPGRID-PC, a new personal computer program has been developed to provide easy access to Singer's 1972 ELIPGRID algorithm for hot-spot detection probabilities. Three features of the program are the ability to determine: (1) the grid size required for specified conditions, (2) the smallest hot spot that can be sampled with a given probability, and (3) the approximate grid size resulting from specified conditions and sampling cost. ELIPGRID-PC also provides probability of hit versus cost data for graphing with spread-sheets or graphics software. The program has been successfully tested using Singer's published ELIPGRID results. An apparent error in the original ELIPGRID code has been uncovered and an appropriate modification incorporated into the new program

  18. VIDEO-PC, SVGA Routines for FORTRAN on PC

    International Nuclear Information System (INIS)

    1994-01-01

    1 - Description of program or function: These primitives are the lowest level routines needed to perform super VGA graphics on a PC. A sample main program is included that exercises the primitives. Both Lahey and Microsoft FORTRAN's have graphics libraries. However, the libraries do not support 256 color graphics at resolutions greater than 320x200. The primitives bypass these libraries while still conforming to standard usage of BIOS. The supported graphics modes depend upon the PC graphics card and its memory. Super VGA resolutions of 640x480 and 800x600 have been tested on an ATI VGA Wonder card with 512 K memory and on several 80486 PC's (unknown manufacturers) at retail stores. 2 - Method of solution: Both Lahey and Microsoft primitives depend upon sending the correct parameters to the PC BIOS (basic input output system) as discussed in the references. 3 - Restrictions on the complexity of the problem: The primitives were developed for 256 color VGA applications. It is known, for instance, that some CGA and 16 color VGA video modes will not operate correctly using these primitives. Potential users should try the test program on their PC/video card combination to determine applicability

  19. Construction and Analysis of a Novel 2-D Optical Orthogonal Codes Based on Modified One-coincidence Sequence

    Science.gov (United States)

    Ji, Jianhua; Wang, Yanfen; Wang, Ke; Xu, Ming; Zhang, Zhipeng; Yang, Shuwen

    2013-09-01

    A new two-dimensional OOC (optical orthogonal codes) named PC/MOCS is constructed, using PC (prime code) for time spreading and MOCS (modified one-coincidence sequence) for wavelength hopping. Compared with PC/PC, the number of wavelengths for PC/MOCS is not limited to a prime number. Compared with PC/OCS, the length of MOCS need not be expanded to the same length of PC. PC/MOCS can be constructed flexibly, and also can use available wavelengths effectively. Theoretical analysis shows that PC/MOCS can reduce the bit error rate (BER) of OCDMA system, and can support more users than PC/PC and PC/OCS.

  20. Transfer and development of the PC version of ABAQUS program

    International Nuclear Information System (INIS)

    Li Xiaofeng; Zhu Yuqiao

    1998-01-01

    The transfer and development of the PC version of ABAQUS,a large nonlinear mechanical finite element analysis program, are carried out. Some special problem such as difference of the floating data format in different computers and the computer's unusual dead halt during the data transfer is solved and the visualized I/O capability is added in the redevelopment. Thus, by utilizing the visual capability, the intensity of analysis works is reduced, and the correctness of analysis is ensured. The PC ABAQUS are tested by the standard examples from VAX version of ABAQUS and the calculation results are correct. The results of calculation of stress and deformation for CEFR shell structure with PC ABAQUS and ADINA codes agree very well

  1. Versatile PC-logger for radioisotope measurements

    International Nuclear Information System (INIS)

    Furman, L.; Petryka, L.; Przewlocki, K.; Stegowski, Z.; Wierzbicki, A.

    1998-01-01

    The logger, a personal computer and software is all to set up a radioisotope measuring system. It may find numerous applications in a wide range of disciplines: kinetics description of flow process in industry, slip velocity measurements in hydrotransport, flow rates evaluation in waste water treatment plants, nucleonic gauges in industry, ect. Readings from up to 4 scintillation detectors, the user has set to log, are stored in regular intervals. The user can set the logger to start and stop logging manually, with keyboard or from a program running on a connected PC. Stored data can be transferred to any computer with RS232 serial interface. The logger works equally well together with conventional PC's and 'lap-tops' for field work. Its internal program is stored in nonvolatile RAM. This makes it possible to upgrade or change the code by just down loading a new one. The logger is internal rechargeable batteries for measuring off-line; they remain as a back-up in case the external supply is disconnected or fails. (author)

  2. A PC board photometer controller

    International Nuclear Information System (INIS)

    Sten, T.A.

    1987-01-01

    The 4-S/D meridian scanning photometer (MSP) reffered to in this report was originally built at the Uppsala Ionospheric Observatory, Uppsala, Sweden. After several years of reliable operation at the Norwegian Institute of Cosmic Physics, Oslo from 1969, the electronics was completely re-designed in 1985, using a CDP 1802 microprocessor and a FP1100 CASIO personal computer (PC) for control and data acquisition. The MSP was then set into operation at the Polish Academy of Science's Polar Station at Hornsund, Spitzbergen. This system was again changed in 1986 as described in the following, providing a greater flexibility and data-handling capacity. The new MSP controller (based on a PC board) is easier to build, utilizing the microprocessor and the direct memory acess controller of the PC

  3. Port virtual addressing for PC

    International Nuclear Information System (INIS)

    Bolanos, L.; Arista, E.; Osorio Deliz, J.F.

    1997-01-01

    Instruments for nuclear signal measurements based on add-on card for a personal computer (PC) are designed often. Then one faces the problem of the addressing of data input/output devices which show an integration level or intelligence that makes the use of several port address indispensable, and these are limited in the PC. The virtual addressing offers the advantage of the occupation of few addresses to accede to many of these devices. The principles of this technique and the appliances of a solution in radiometric in a radiometric card based on programmed logic are discussed in this paper

  4. Oefeningen met SPSS/PC+

    NARCIS (Netherlands)

    Cramwinckel, A.B.; Mazijk-Bokslag, van D.M.; Herstel, H.; Huisman, B.

    1991-01-01

    Dit verslag is op te vatten als een handleiding voor het gebruik van SPSS/PC. De handleiding is geschreven voor een cursus statistiek die in het voorjaar van 1990 voor twaalf RIKILT-medewerkers is gehouden. De cursus bevatte tevens een theoretisch gedeelte. De tekst daarvan is als RIKILT rapport

  5. PC-based temperature monitoring

    International Nuclear Information System (INIS)

    Sayne Lei Shwe; Pho Kaung; Zaw Win; Myint Kyi

    2001-01-01

    An economical and practical thermometer interface for the IBM compatible personal computer (PC) has been developed. It can indicate temperature changes as little as 0.4 0 C and covers a temperature range of zero to 100 0 C. Those involved in scientific studies can use it not only as a temperature recorde/display but also as a temperature controller. (author)

  6. El blindaje de una PC

    Directory of Open Access Journals (Sweden)

    Revista Chasqui

    2015-01-01

    Full Text Available La navegación en Internet y la consiguiente conexión a una red expone a una computadora a un sinfín de riesgos y peligros. Una PC que no sea utilizada para navegar en Internet o que no esté conectada a una red puede,incluso, ser también afectada por virus, por la utilización de disquetes contaminados que la contaminen con un virus. Para enfrentar esos problemas, la industria informática ha previsto una serie de protecciones y recaudos, de cuyo uso y utilización deben estar plenamente informados los usuarios de una PC.

  7. PC 2 Phone Event Announcer

    OpenAIRE

    Parhizkar, Behrang; Alazizi, Abdulbasit Mohammad Abdulrahman; Ali, Mohammad Nabil Sadegh; Ramachandran, Anand; Navaratnam, Sujata

    2010-01-01

    Nowadays, mobile phones are indispensable devices; it has become a trend now that college and university students are owners of such devices and this particular factor plays a very important role behind the coming up with the proposed system. “PC 2 Phone event Announcer”, is the name of the new proposed system suggested to solve the existing communication problem between the College staff and students. As the name suggests, it can be deduced that the system will involve computers and phones, ...

  8. Data acquisition techniques using PC

    CERN Document Server

    Austerlitz, Howard

    1991-01-01

    Data Acquisition Techniques Using Personal Computers contains all the information required by a technical professional (engineer, scientist, technician) to implement a PC-based acquisition system. Including both basic tutorial information as well as some advanced topics, this work is suitable as a reference book for engineers or as a supplemental text for engineering students. It gives the reader enough understanding of the topics to implement a data acquisition system based on commercial products. A reader can alternatively learn how to custom build hardware or write his or her own software.

  9. Conversion from 8800 to 8800PC - Evaluation and experience

    International Nuclear Information System (INIS)

    Miner, A.E.; Lawson, B.J.

    1998-01-01

    Though a final version of the software is pending the 8800PC operating system host computer is a welcomed change from the old Digital (DEC) host computer. The 8800PC host computer uses the Windows NT operating system and has proven to be very user friendly. Descriptive window messages replace the cryptic coding of the DEC host. Though numerous electrical components were replaced, system calibration remained constant. Calibrated Thermoluminescent (TL) output from a randomly selected 8815 field card was measured before and after the upgrade. The % difference, when comparing calibrated output from an upgraded reader to the non upgraded reader, ranged from 0.2 to 3%. The most disappointing aspect of the upgrade experience was the lag time between hardware installation and software completion

  10. PC based vibration monitoring system

    International Nuclear Information System (INIS)

    Jain, Sanjay K.; Roy, D.A.; Pithawa, C.K.; Patil, R.K.

    2004-01-01

    Health of large rotating machinery gets reflected in the vibration signature of the rotor and supporting structures and proper recording of these signals and their analysis can give a clear picture of the health of the machine. Using these data and their trending, it is possible to predict an impending trouble in the machine so that preventive action can be taken in time and catastrophic failure can be avoided. Continuous monitoring and analysis can give quick warning and enable operator to take preventive measures. Reactor Control Division, BARC is developing a PC based Vibration monitoring system for turbo generator machinery. The System can acquire 20 vibration signals at a rate of 5000 samples per second and also 15 process signals at a rate of 100 samples/ sec. The software for vibration monitoring system includes acquisition modules, analysis modules and Graphical User Interface module. The acquisition module involves initialization, setting of required parameters and acquiring the data from PC-based data acquisition cards. The acquired raw vibration data is then stored for analysis using various software packages. The display and analysis of acquired data is done in LabVIEW 7.0 where the data is displayed in time as well as frequency domain along with the RMS value of the signal. (author)

  11. PC driven integrated vacuum system

    International Nuclear Information System (INIS)

    Curuia, Marian; Culcer, Mihai; Brandea, Iulian; Anghel, Mihai

    2001-01-01

    The monitoring of industrial plants by virtual instrumentation represents the most modern trend in the domain of electronic equipment. The integrated vacuum system presented here has several facilities, including the automated data storing of measurement results on hard disk and providing warning messages for operators when the measured parameters are lower or higher upper than the fixed values. The system can also work stand-alone, receiving the commands from the keyboards placed on his front panel but, when it is included in a automation complex system, a remote control from PC is necessary . Both parts of the system, power supply unit for turbo-molecular pump and the vacuum gage, are controlled by an 80C31 microcontroller. Because this microcontroller has a built-in circuitry for a serial communication, we established a serial communication between the PC and the power supply unit for turbo-molecular pump and the vacuum gage, according to the RS-232 hardware standard. As software, after careful evaluation of several options, we chose to develop a hybrid software packing using two different software development tools: LabVIEW, and assembly language. We chose LabVIEW because it is dedicated to data acquisition and communications, containing libraries for data collection, analysis, display and storage. (authors)

  12. PC/104 Embedded IOCs at Jefferson Lab

    Energy Technology Data Exchange (ETDEWEB)

    Jianxun Yan, Trent Allison, Sue Witherspoon, Anthony Cuffe

    2009-10-01

    Jefferson Lab has developed embedded IOCs based on PC/104 single board computers (SBC) for low level control systems. The PC/104 IOCs run EPICS on top of the RTEMS operating system. Two types of control system configurations are used in different applications, PC/104 SBC with commercial PC/104 I/O cards and PC/104 SBC with custom designed FPGA-based boards. RTEMS was built with CEXP shell to run on the PC/104 SBC. CEXP shell provides the function of dynamic object loading, which is similar to the widely used VxWorks operating system. Standard software configurations were setup for PC/104 IOC application development to provide a familiar format for new projects as well as ease the conversion of applications from VME based IOCs to PC/104 IOCs. Many new projects at Jefferson Lab are going to employ PC/104 SBCs as IOCs and some applications have already been running them for accelerator operations. The PC/104 - RTEMS IOC provides a free open source Real-Time Operating System (RTOS), low cost/maintenance, easily installed/ configured, flexible, and reliable solution for accelerator control and 12GeV Upgrade projects.

  13. ENDF utility codes version 6.8

    International Nuclear Information System (INIS)

    McLaughlin, P.K.

    1992-01-01

    Description and operating instructions are given for a package of utility codes operating on evaluated nuclear data files in the formats ENDF-5 and ENDF-6. Included are the data checking codes CHECKER, FIZCON, PSYCHE; the code INTER for retrieving thermal cross-sections and some other data; graphical plotting codes PLOTEF, GRALIB, graphic device interface subroutine library INTLIB; and the file maintenance and retrieval codes LISTEF, SETMDC, GETMAT, STANEF. This program package which is designed for CDC, IBM, DEC and PC computers, can be obtained on magnetic tape or floppy diskette, free of charge, from the IAEA Nuclear Data Section. (author)

  14. Porting of graphic tools to PC environment

    International Nuclear Information System (INIS)

    Fuji, Toshihiro; Yamazaki, Kazuhiko

    2000-10-01

    Because of high performance and low pricing of the PC(Personal computers) in these days, Distributed-processing has been so advanced that most of computations, which has been processed by main computers so far, are possible to be executed by PC. We have exported the graphic tools including PIFLIB, GGS and ARGUS, which were used on main frame computers, to PC environments. And we developed the WINPIF programs for PC graphic tools by converting from XPIF program which has been used on workstations as a general graphic tool. (author)

  15. Coding Partitions

    Directory of Open Access Journals (Sweden)

    Fabio Burderi

    2007-05-01

    Full Text Available Motivated by the study of decipherability conditions for codes weaker than Unique Decipherability (UD, we introduce the notion of coding partition. Such a notion generalizes that of UD code and, for codes that are not UD, allows to recover the ``unique decipherability" at the level of the classes of the partition. By tacking into account the natural order between the partitions, we define the characteristic partition of a code X as the finest coding partition of X. This leads to introduce the canonical decomposition of a code in at most one unambiguouscomponent and other (if any totally ambiguouscomponents. In the case the code is finite, we give an algorithm for computing its canonical partition. This, in particular, allows to decide whether a given partition of a finite code X is a coding partition. This last problem is then approached in the case the code is a rational set. We prove its decidability under the hypothesis that the partition contains a finite number of classes and each class is a rational set. Moreover we conjecture that the canonical partition satisfies such a hypothesis. Finally we consider also some relationships between coding partitions and varieties of codes.

  16. Coding Class

    DEFF Research Database (Denmark)

    Ejsing-Duun, Stine; Hansbøl, Mikala

    Sammenfatning af de mest væsentlige pointer fra hovedrapporten: Dokumentation og evaluering af Coding Class......Sammenfatning af de mest væsentlige pointer fra hovedrapporten: Dokumentation og evaluering af Coding Class...

  17. Channel coding techniques for wireless communications

    CERN Document Server

    Deergha Rao, K

    2015-01-01

    The book discusses modern channel coding techniques for wireless communications such as turbo codes, low-density parity check (LDPC) codes, space–time (ST) coding, RS (or Reed–Solomon) codes and convolutional codes. Many illustrative examples are included in each chapter for easy understanding of the coding techniques. The text is integrated with MATLAB-based programs to enhance the understanding of the subject’s underlying theories. It includes current topics of increasing importance such as turbo codes, LDPC codes, Luby transform (LT) codes, Raptor codes, and ST coding in detail, in addition to the traditional codes such as cyclic codes, BCH (or Bose–Chaudhuri–Hocquenghem) and RS codes and convolutional codes. Multiple-input and multiple-output (MIMO) communications is a multiple antenna technology, which is an effective method for high-speed or high-reliability wireless communications. PC-based MATLAB m-files for the illustrative examples are provided on the book page on Springer.com for free dow...

  18. Monte Carlo simulations on a 9-node PC cluster

    International Nuclear Information System (INIS)

    Gouriou, J.

    2001-01-01

    Monte Carlo simulation methods are frequently used in the fields of medical physics, dosimetry and metrology of ionising radiation. Nevertheless, the main drawback of this technique is to be computationally slow, because the statistical uncertainty of the result improves only as the square root of the computational time. We present a method, which allows to reduce by a factor 10 to 20 the used effective running time. In practice, the aim was to reduce the calculation time in the LNHB metrological applications from several weeks to a few days. This approach includes the use of a PC-cluster, under Linux operating system and PVM parallel library (version 3.4). The Monte Carlo codes EGS4, MCNP and PENELOPE have been implemented on this platform and for the two last ones adapted for running under the PVM environment. The maximum observed speedup is ranging from a factor 13 to 18 according to the codes and the problems to be simulated. (orig.)

  19. Intracranial artery velocity measurement using 4D PC MRI at 3 T: comparison with transcranial ultrasound techniques and 2D PC MRI

    International Nuclear Information System (INIS)

    Meckel, Stephan; Leitner, Lorenz; Schubert, Tilman; Bonati, Leo H.; Lyrer, Philippe; Santini, Francesco; Stalder, Aurelien F.; Markl, Michael; Wetzel, Stephan G.

    2013-01-01

    4D phase contrast MR imaging (4D PC MRI) has been introduced for spatiotemporal evaluation of intracranial hemodynamics in various cerebrovascular diseases. However, it still lacks validation with standards of reference. Our goal was to compare blood flow quantification derived from 4D PC MRI with transcranial ultrasound and 2D PC MRI. Velocity measurements within large intracranial arteries [internal carotid artery (ICA), basilar artery (BA), and middle cerebral artery (MCA)] were obtained in 20 young healthy volunteers with 4D and 2D PC MRI, transcranial Doppler sonography (TCD), and transcranial color-coded duplex sonography (TCCD). Maximum velocities at peak systole (PSV) and end diastole (EDV) were compared using regression analysis and Bland-Altman plots. Correlation of 4D PC MRI measured velocities was higher in comparison with TCD (r = 0.49-0.66) than with TCCD (0.35-0.44) and 2D PC MRI (0.52-0.60). In mid-BA and ICA C7 segment, a significant correlation was found with TCD (0.68-0.81 and 0.65-0.71, respectively). No significant correlation was found in carotid siphon. On average over all volunteers, PSVs and EDVs in MCA were minimally underestimated compared with TCD/TCCD. Minimal overestimation of velocities was found compared to TCD in mid-BA and ICA C7 segment. 4D PC MRI appears as valid alternative for intracranial velocity measurement consistent with previous reference standards, foremost with TCD. Spatiotemporal averaging effects might contribute to vessel size-dependent mild underestimation of velocities in smaller (MCA), and overestimation in larger-sized (BA and ICA) arteries, respectively. Complete spatiotemporal flow analysis may be advantageous in anatomically complex regions (e.g. carotid siphon) relative to restrictions of ultrasound techniques. (orig.)

  20. Intracranial artery velocity measurement using 4D PC MRI at 3 T: comparison with transcranial ultrasound techniques and 2D PC MRI

    Energy Technology Data Exchange (ETDEWEB)

    Meckel, Stephan [University Hospital Freiburg, Department of Neuroradiology, Freiburg (Germany); Leitner, Lorenz; Schubert, Tilman [University Hospital Basel, Institute of Radiology, Basel (Switzerland); Bonati, Leo H.; Lyrer, Philippe [University Hospital Basel, Department of Neurology, Basel (Switzerland); Santini, Francesco [University Hospital Basel, Department of Radiological Physics, Institute of Radiology, Basel (Switzerland); Stalder, Aurelien F. [Xuanwu Hospital - Capital Medical University, Department of Radiology, Beijing (China); Markl, Michael [Northwestern University Feinberg School of Medicine, Departments of Radiology and Biomedical Engineering, Chicago (United States); Wetzel, Stephan G. [Neuroradiology, Swiss Neuro Institute, Klinik Hirslanden, Zurich (Switzerland)

    2013-04-15

    4D phase contrast MR imaging (4D PC MRI) has been introduced for spatiotemporal evaluation of intracranial hemodynamics in various cerebrovascular diseases. However, it still lacks validation with standards of reference. Our goal was to compare blood flow quantification derived from 4D PC MRI with transcranial ultrasound and 2D PC MRI. Velocity measurements within large intracranial arteries [internal carotid artery (ICA), basilar artery (BA), and middle cerebral artery (MCA)] were obtained in 20 young healthy volunteers with 4D and 2D PC MRI, transcranial Doppler sonography (TCD), and transcranial color-coded duplex sonography (TCCD). Maximum velocities at peak systole (PSV) and end diastole (EDV) were compared using regression analysis and Bland-Altman plots. Correlation of 4D PC MRI measured velocities was higher in comparison with TCD (r = 0.49-0.66) than with TCCD (0.35-0.44) and 2D PC MRI (0.52-0.60). In mid-BA and ICA C7 segment, a significant correlation was found with TCD (0.68-0.81 and 0.65-0.71, respectively). No significant correlation was found in carotid siphon. On average over all volunteers, PSVs and EDVs in MCA were minimally underestimated compared with TCD/TCCD. Minimal overestimation of velocities was found compared to TCD in mid-BA and ICA C7 segment. 4D PC MRI appears as valid alternative for intracranial velocity measurement consistent with previous reference standards, foremost with TCD. Spatiotemporal averaging effects might contribute to vessel size-dependent mild underestimation of velocities in smaller (MCA), and overestimation in larger-sized (BA and ICA) arteries, respectively. Complete spatiotemporal flow analysis may be advantageous in anatomically complex regions (e.g. carotid siphon) relative to restrictions of ultrasound techniques. (orig.)

  1. E-Books and the Tablet PC.

    Science.gov (United States)

    Goodwin-Jones, Bob

    2003-01-01

    Highlights the emerging technologies of e-books, electronic versions of texts, and the Tablet PC, a new hybrid laptop computer and personal digital assistant that features a writing tablet and stylus-based input/navigation. (Author/VWL)

  2. [Dry eye syndrome and the PC screen].

    Science.gov (United States)

    Moldovan, Iulia; Stan, Cristina; Marc, Alexandra

    2013-01-01

    To study the correlation between PC screen exposure of over 8 hours and Dry Eye Syndrome in 18-25 years-old students. This is a cross-sectional, cohort clinical study, carried out in March 2012 - February 2013. All subjects completed a questionnaire, underwent a slit lamp examination and measurement of visual acuity. Among the 59 participants of this study, 26 were EXPOSED (> 8 hours of PC screen exposure = EXPOSED) and 33 were NONEXPOSED. The 18-25 - year old participants who were exposed over 8 hours to the PC screen had a relative risk of 5,5 to develop Dry Eye Syndrome, compared to NONEXPOSED participants. Results indicate that Dry Eye Syndrome incidence and intensity of symptoms had increased proportionally with the hours of exposure. Tear Film Breakup Time, the Ocular Protection Index and the PC Ocular Protection Index decreased with the hours of PC screen exposure, suggesting a behavioral change in the EXPOSED participants. Exposure of over 8 hours to the PC screen caused Dry Eye Syndrome in 18-25 - year old students, with a relative risk of 5,5.

  3. Network Coding

    Indian Academy of Sciences (India)

    message symbols downstream, network coding achieves vast performance gains by permitting intermediate nodes to carry out algebraic oper- ations on the incoming data. In this article we present a tutorial introduction to network coding as well as an application to the e±cient operation of distributed data-storage networks.

  4. Coding Class

    DEFF Research Database (Denmark)

    Ejsing-Duun, Stine; Hansbøl, Mikala

    Denne rapport rummer evaluering og dokumentation af Coding Class projektet1. Coding Class projektet blev igangsat i skoleåret 2016/2017 af IT-Branchen i samarbejde med en række medlemsvirksomheder, Københavns kommune, Vejle Kommune, Styrelsen for IT- og Læring (STIL) og den frivillige forening......, design tænkning og design-pædagogik, Stine Ejsing-Duun fra Forskningslab: It og Læringsdesign (ILD-LAB) ved Institut for kommunikation og psykologi, Aalborg Universitet i København. Vi har fulgt og gennemført evaluering og dokumentation af Coding Class projektet i perioden november 2016 til maj 2017....... Coding Class projektet er et pilotprojekt, hvor en række skoler i København og Vejle kommuner har igangsat undervisningsaktiviteter med fokus på kodning og programmering i skolen. Evalueringen og dokumentationen af projektet omfatter kvalitative nedslag i udvalgte undervisningsinterventioner i efteråret...

  5. Coding Labour

    Directory of Open Access Journals (Sweden)

    Anthony McCosker

    2014-03-01

    Full Text Available As well as introducing the Coding Labour section, the authors explore the diffusion of code across the material contexts of everyday life, through the objects and tools of mediation, the systems and practices of cultural production and organisational management, and in the material conditions of labour. Taking code beyond computation and software, their specific focus is on the increasingly familiar connections between code and labour with a focus on the codification and modulation of affect through technologies and practices of management within the contemporary work organisation. In the grey literature of spreadsheets, minutes, workload models, email and the like they identify a violence of forms through which workplace affect, in its constant flux of crisis and ‘prodromal’ modes, is regulated and governed.

  6. PC based 8-parameter data acquisition system

    International Nuclear Information System (INIS)

    Gupta, J.D.; Naik, K.V.; Jain, S.K.; Pathak, R.V.; Suman, B.

    1989-01-01

    Multiparameter data acquisition (MPA) systems which analyse nuclear events with respect to more than one property of the event are essential tools for the study of some complex nuclear phenomena requiring analysis of time coincident spectra. For better throughput and accuracy each parameter is digitized by its own ADC. A stand alone low cost IBM PC based 8-parameter data acquisition system developed by the authors makes use of Address Recording technique for acquiring data from eight 12 bit ADC's in the PC Memory. Two memory buffers in the PC memory are used in ping-pong fashion so that data acquisition in one bank and dumping of data onto PC disk from the other bank can proceed simultaneously. Data is acquired in the PC memory through DMA mode for realising high throughput and hardware interrupt is used for switching banks for data acquisition. A comprehensive software package developed in Turbo-Pascal offers a set of menu-driven interactive commands to the user for setting-up system parameters and control of the system. The system is to be used with pelletron accelerator. (author). 5 figs

  7. Desain dan Implementasi Sistem Kendali CNC Router Menggunakan PC untuk Flame Cutting Machine

    Directory of Open Access Journals (Sweden)

    Roni Permana Saputra

    2012-03-01

    Full Text Available This paper focuses on design of router control systems based on computer numerical control (CNC using personal computer (PC implemented in flame cutting machine (FCM. NC-Code entered into the computer translated to be a command signal sent by the PC to a microcontroller to control the end effector’s movement alongthe X and Y axis simultaneously based on linear and circular interpolations calculation on the PC. This control system is implemented on FCM by connecting the output control of the microcontroller with the driver actuator of the FCM in the form of a DC motor. The obtained result is in the form of a CNC router control system prototype to be implemented in the FCM which is capable to perform linear interpolation and circular interpolation. 

  8. MARS Code in Linux Environment

    International Nuclear Information System (INIS)

    Hwang, Moon Kyu; Bae, Sung Won; Jung, Jae Joon; Chung, Bub Dong

    2005-01-01

    The two-phase system analysis code MARS has been incorporated into Linux system. The MARS code was originally developed based on the RELAP5/MOD3.2 and COBRA-TF. The 1-D module which evolved from RELAP5 alone could be applied for the whole NSSS system analysis. The 3-D module developed based on the COBRA-TF, however, could be applied for the analysis of the reactor core region where 3-D phenomena would be better treated. The MARS code also has several other code units that could be incorporated for more detailed analysis. The separate code units include containment analysis modules and 3-D kinetics module. These code modules could be optionally invoked to be coupled with the main MARS code. The containment code modules (CONTAIN and CONTEMPT), for example, could be utilized for the analysis of the plant containment phenomena in a coupled manner with the nuclear reactor system. The mass and energy interaction during the hypothetical coolant leakage accident could, thereby, be analyzed in a more realistic manner. In a similar way, 3-D kinetics could be incorporated for simulating the three dimensional reactor kinetic behavior, instead of using the built-in point kinetics model. The MARS code system, developed initially for the MS Windows environment, however, would not be adequate enough for the PC cluster system where multiple CPUs are available. When parallelism is to be eventually incorporated into the MARS code, MS Windows environment is not considered as an optimum platform. Linux environment, on the other hand, is generally being adopted as a preferred platform for the multiple codes executions as well as for the parallel application. In this study, MARS code has been modified for the adaptation of Linux platform. For the initial code modification, the Windows system specific features have been removed from the code. Since the coupling code module CONTAIN is originally in a form of dynamic load library (DLL) in the Windows system, a similar adaptation method

  9. MARS Code in Linux Environment

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Moon Kyu; Bae, Sung Won; Jung, Jae Joon; Chung, Bub Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    2005-07-01

    The two-phase system analysis code MARS has been incorporated into Linux system. The MARS code was originally developed based on the RELAP5/MOD3.2 and COBRA-TF. The 1-D module which evolved from RELAP5 alone could be applied for the whole NSSS system analysis. The 3-D module developed based on the COBRA-TF, however, could be applied for the analysis of the reactor core region where 3-D phenomena would be better treated. The MARS code also has several other code units that could be incorporated for more detailed analysis. The separate code units include containment analysis modules and 3-D kinetics module. These code modules could be optionally invoked to be coupled with the main MARS code. The containment code modules (CONTAIN and CONTEMPT), for example, could be utilized for the analysis of the plant containment phenomena in a coupled manner with the nuclear reactor system. The mass and energy interaction during the hypothetical coolant leakage accident could, thereby, be analyzed in a more realistic manner. In a similar way, 3-D kinetics could be incorporated for simulating the three dimensional reactor kinetic behavior, instead of using the built-in point kinetics model. The MARS code system, developed initially for the MS Windows environment, however, would not be adequate enough for the PC cluster system where multiple CPUs are available. When parallelism is to be eventually incorporated into the MARS code, MS Windows environment is not considered as an optimum platform. Linux environment, on the other hand, is generally being adopted as a preferred platform for the multiple codes executions as well as for the parallel application. In this study, MARS code has been modified for the adaptation of Linux platform. For the initial code modification, the Windows system specific features have been removed from the code. Since the coupling code module CONTAIN is originally in a form of dynamic load library (DLL) in the Windows system, a similar adaptation method

  10. Found a USB stick? Go and infect your PC!

    CERN Document Server

    Computer Security Team

    2012-01-01

    Err. Wait. Please no! USB sticks are not innocent little things. They can quickly mutate into malicious nasty beasts! Just in the recent past, at least two physics experiments were suffering as their control and data acquisition PCs, respectively, were infected by USB sticks holding malicious code. A bit longer ago, a series of laptops were infected at a 2008 computing conference as an infected USB stick made its tour around. Bad luck for those who ran a Windows operating system and inserted that stick…   So, you found a USB stick in the cafeteria? Take care. If this were a lollipop, you wouldn’t just pick it up and lick it, would you? So beware of USB sticks whose origin or previous usage you don’t know. They might infect your PC once plugged in. In order to be on the safe side, accept and share only USB sticks whose owner you trust. Run up-to-date anti-virus software on your PC, make sure that its operating system is patched...

  11. Peak Pc Prediction in Conjunction Analysis: Conjunction Assessment Risk Analysis. Pc Behavior Prediction Models

    Science.gov (United States)

    Vallejo, J.J.; Hejduk, M.D.; Stamey, J. D.

    2015-01-01

    Satellite conjunction risk typically evaluated through the probability of collision (Pc). Considers both conjunction geometry and uncertainties in both state estimates. Conjunction events initially discovered through Joint Space Operations Center (JSpOC) screenings, usually seven days before Time of Closest Approach (TCA). However, JSpOC continues to track objects and issue conjunction updates. Changes in state estimate and reduced propagation time cause Pc to change as event develops. These changes a combination of potentially predictable development and unpredictable changes in state estimate covariance. Operationally useful datum: the peak Pc. If it can reasonably be inferred that the peak Pc value has passed, then risk assessment can be conducted against this peak value. If this value is below remediation level, then event intensity can be relaxed. Can the peak Pc location be reasonably predicted?

  12. Population dose assessment: characteristics of PC CREAM

    International Nuclear Information System (INIS)

    Alonso, Maria T.; Curti, Adriana R.

    2000-01-01

    This paper presents the main features of the PC CREAM, a program for performing radiological impact assessments due to radioactive discharges into the environment during the operation of radioactive and nuclear facilities. PC CREAM is a suite of six programs that can be used to estimate individual and collective radiation doses. The methodology of PC CREAM is based on updated environmental and dosimetric models, including ICRP 60 recommendations. The models include several exposure pathways and the input files are easy to access. The ergonomics of the program improves the user interaction and makes easier the input of local data. This program is useful for performing sensitivity analysis, siting studies and validation of model comparing the activity concentration output data with environmental monitoring data. The methodology of each module is described as well as the output data. (author)

  13. Installation and implementation of PC COSYMA

    International Nuclear Information System (INIS)

    Rossi, J.

    1995-12-01

    COSYMA is a probabilistic reactor accident consequence assessment model developed in the 1980's by the research institutes of the EC countries, primarily by NRPB and KfK. In 1993 a simplified version of the program was released to be implemented on a PC. In the study the PC COSYMA program was applied to calculate as the end points nuclide concentrations, doses received, numbers of health effects, areas affected by countermeasures and other results related to countermeasure strategies. Some results are compared with the results obtained by the ARANO program developed by VTT Energy (Technical Research Centre of Finland) to quarantee proper interpretation of the application. (15 refs.)

  14. Tablet PC Support of Students' Learning Styles

    Directory of Open Access Journals (Sweden)

    Shreya Kothaneth

    2012-12-01

    Full Text Available In the context of rapid technology development, it comes as no surprise that technology continues to impact the educational domain, challenging traditional teaching and learning styles. This study focuses on how students with different learning styles use instructional technology, and in particular, the tablet PC, to enhance their learning experience. The VARK model was chosen as our theoretical framework as we analyzed responses of an online survey, both from a quantitative and qualitative standpoint. Results indicate that if used correctly, the tablet PC can be used across different learning styles to enrich the educational experience.

  15. Speech coding

    Energy Technology Data Exchange (ETDEWEB)

    Ravishankar, C., Hughes Network Systems, Germantown, MD

    1998-05-08

    Speech is the predominant means of communication between human beings and since the invention of the telephone by Alexander Graham Bell in 1876, speech services have remained to be the core service in almost all telecommunication systems. Original analog methods of telephony had the disadvantage of speech signal getting corrupted by noise, cross-talk and distortion Long haul transmissions which use repeaters to compensate for the loss in signal strength on transmission links also increase the associated noise and distortion. On the other hand digital transmission is relatively immune to noise, cross-talk and distortion primarily because of the capability to faithfully regenerate digital signal at each repeater purely based on a binary decision. Hence end-to-end performance of the digital link essentially becomes independent of the length and operating frequency bands of the link Hence from a transmission point of view digital transmission has been the preferred approach due to its higher immunity to noise. The need to carry digital speech became extremely important from a service provision point of view as well. Modem requirements have introduced the need for robust, flexible and secure services that can carry a multitude of signal types (such as voice, data and video) without a fundamental change in infrastructure. Such a requirement could not have been easily met without the advent of digital transmission systems, thereby requiring speech to be coded digitally. The term Speech Coding is often referred to techniques that represent or code speech signals either directly as a waveform or as a set of parameters by analyzing the speech signal. In either case, the codes are transmitted to the distant end where speech is reconstructed or synthesized using the received set of codes. A more generic term that is applicable to these techniques that is often interchangeably used with speech coding is the term voice coding. This term is more generic in the sense that the

  16. Fast detection of covert visuospatial attention using hybrid N2pc and SSVEP features

    Science.gov (United States)

    Xu, Minpeng; Wang, Yijun; Nakanishi, Masaki; Wang, Yu-Te; Qi, Hongzhi; Jung, Tzyy-Ping; Ming, Dong

    2016-12-01

    Objective. Detecting the shift of covert visuospatial attention (CVSA) is vital for gaze-independent brain-computer interfaces (BCIs), which might be the only communication approach for severely disabled patients who cannot move their eyes. Although previous studies had demonstrated that it is feasible to use CVSA-related electroencephalography (EEG) features to control a BCI system, the communication speed remains very low. This study aims to improve the speed and accuracy of CVSA detection by fusing EEG features of N2pc and steady-state visual evoked potential (SSVEP). Approach. A new paradigm was designed to code the left and right CVSA with the N2pc and SSVEP features, which were then decoded by a classification strategy based on canonical correlation analysis. Eleven subjects were recruited to perform an offline experiment in this study. Temporal waves, amplitudes, and topographies for brain responses related to N2pc and SSVEP were analyzed. The classification accuracy derived from the hybrid EEG features (SSVEP and N2pc) was compared with those using the single EEG features (SSVEP or N2pc). Main results. The N2pc could be significantly enhanced under certain conditions of SSVEP modulations. The hybrid EEG features achieved significantly higher accuracy than the single features. It obtained an average accuracy of 72.9% by using a data length of 400 ms after the attention shift. Moreover, the average accuracy reached ˜80% (peak values above 90%) when using 2 s long data. Significance. The results indicate that the combination of N2pc and SSVEP is effective for fast detection of CVSA. The proposed method could be a promising approach for implementing a gaze-independent BCI.

  17. The SEDA computer code and its utilization for Angra 1

    International Nuclear Information System (INIS)

    Fernandes Filho, T.L.

    1988-11-01

    The implementation of SEDA 2.0 computer code, developed at Ezeiza Atomic Center, Argentine for Angra 1 reactor is described. The SEDA code gives an estimate for radiological consequences of nuclear accidents with release of radiactive materials for the environment. This code is now available for an IBM PC-XT. The computer environment, the files used, data, the programining structure and the models used are presented. The input data and results for two sample case are described. (author) [pt

  18. NSURE code

    International Nuclear Information System (INIS)

    Rattan, D.S.

    1993-11-01

    NSURE stands for Near-Surface Repository code. NSURE is a performance assessment code. developed for the safety assessment of near-surface disposal facilities for low-level radioactive waste (LLRW). Part one of this report documents the NSURE model, governing equations and formulation of the mathematical models, and their implementation under the SYVAC3 executive. The NSURE model simulates the release of nuclides from an engineered vault, their subsequent transport via the groundwater and surface water pathways tot he biosphere, and predicts the resulting dose rate to a critical individual. Part two of this report consists of a User's manual, describing simulation procedures, input data preparation, output and example test cases

  19. Speaking Code

    DEFF Research Database (Denmark)

    Cox, Geoff

    Speaking Code begins by invoking the “Hello World” convention used by programmers when learning a new language, helping to establish the interplay of text and code that runs through the book. Interweaving the voice of critical writing from the humanities with the tradition of computing and softwa...... expression in the public realm. The book’s line of argument defends language against its invasion by economics, arguing that speech continues to underscore the human condition, however paradoxical this may seem in an era of pervasive computing....

  20. CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (IBM PC VERSION)

    Science.gov (United States)

    Riley, G.

    1994-01-01

    The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh

  1. Investigasi Serangan Malware Njrat Pada PC

    Directory of Open Access Journals (Sweden)

    Devi Rizky Septiani

    2016-12-01

    Full Text Available Malware merupakan salah satu bentuk dari kejahatan komputer yang terjadi pada sebuah sistem jaringan komputer, malware Njrat termasuk jenis Trojan horse. Trojan adalah salah satu jenis malware yang ikut berkembang di dalamnya, yang memungkinkan attacker masuk ke dalam sistem tanpa diketahui oleh pemilik. Penggunaan trojan saat ini lebih ke arah kejahatan dunia maya (cyber crime, salah satu dari malware yang sangat berbahaya karena besarnya dampak kerugian yang ditimbulkan, mulai dari pencurian data penting sampai mengubah hak akses pada PC korban. Sasaran terbanyak penybaran trojan adalah pengguna sistem operasi windows. Penyebaran trojan ini dilakukan dengan metode social engineering, yaitu teknik yang menggunakan kelemahan manusia, sehingga user tanpa curiga langsung mengeksekusi sebuah program yang tidak dikenal.  Aktivitas malware berkaitan erat dengan  performa PC dan juga aktifitas network pada system computer. Penelitian ini bertujuan untuk mengetahui cara kerja malware Njrat dan melakukan investigasi terhadap performa pada system computer. Metodologi yang digunakan dynamic analysis dengan melakukan analisa malware pada suatu sistem dan melihat aktivitas atau proses yang diaktifkan oleh malware tersebut. Dampak perubahan yang terjadi pada PC Target terlihat pada performa masing-masing PC yang telah disisipkan malware. Kata kunci            Malware, Njrat, System computer

  2. Combating adverse selection in secondary PC markets.

    Science.gov (United States)

    Hickey, Stewart W; Fitzpatrick, Colin

    2008-04-15

    Adverse selection is a significant contributor to market failure in secondary personal computer (PC) markets. Signaling can act as a potential solution to adverse selection and facilitate superior remarketing of second-hand PCs. Signaling is a means whereby usage information can be utilized to enhance consumer perception of both value and utility of used PCs and, therefore, promote lifetime extension for these systems. This can help mitigate a large portion of the environmental impact associated with PC system manufacture. In this paper, the computer buying and selling behavior of consumers is characterized via a survey of 270 Irish residential users. Results confirm the existence of adverse selection in the Irish market with 76% of potential buyers being unwilling to purchase and 45% of potential vendors being unwilling to sell a used PC. The so-called "closet affect" is also apparent with 78% of users storing their PC after use has ceased. Results also indicate that consumers place a higher emphasis on specifications when considering a second-hand purchase. This contradicts their application needs which are predominantly Internet and word-processing/spreadsheet/presentation applications, 88% and 60% respectively. Finally, a market solution utilizing self monitoring and reporting technology (SMART) sensors for the purpose of real time usage monitoring is proposed, that can change consumer attitudes with regard to second-hand computer equipment.

  3. An Introduction To PC-TRIM.

    Science.gov (United States)

    John R. Mills

    1989-01-01

    The timber resource inventory model (TRIM) has been adapted to run on person al computers. The personal computer version of TRIM (PC-TRIM) is more widely used than its mainframe parent. Errors that existed in previous versions of TRIM have been corrected. Information is presented to help users with program input and output management in the DOS environment, to...

  4. Jargon that Computes: Today's PC Terminology.

    Science.gov (United States)

    Crawford, Walt

    1997-01-01

    Discusses PC (personal computer) and telecommunications terminology in context: Integrated Services Digital Network (ISDN); Asymmetric Digital Subscriber Line (ADSL); cable modems; satellite downloads; T1 and T3 lines; magnitudes ("giga-,""nano-"); Central Processing Unit (CPU); Random Access Memory (RAM); Universal Serial Bus…

  5. An Automation Interface for Kappa PC

    DEFF Research Database (Denmark)

    Hartvig, Susanne C

    1999-01-01

    The reports documents an automation interface for Kappa PC. The automation interface can be used to embed Kappa applications in 32-bit Windowsapplications.The interface includes functions for initialising Kappa, for loading an application, for settingvalues, for getting values, and for stopping...

  6. The Aster code; Code Aster

    Energy Technology Data Exchange (ETDEWEB)

    Delbecq, J.M

    1999-07-01

    The Aster code is a 2D or 3D finite-element calculation code for structures developed by the R and D direction of Electricite de France (EdF). This dossier presents a complete overview of the characteristics and uses of the Aster code: introduction of version 4; the context of Aster (organisation of the code development, versions, systems and interfaces, development tools, quality assurance, independent validation); static mechanics (linear thermo-elasticity, Euler buckling, cables, Zarka-Casier method); non-linear mechanics (materials behaviour, big deformations, specific loads, unloading and loss of load proportionality indicators, global algorithm, contact and friction); rupture mechanics (G energy restitution level, restitution level in thermo-elasto-plasticity, 3D local energy restitution level, KI and KII stress intensity factors, calculation of limit loads for structures), specific treatments (fatigue, rupture, wear, error estimation); meshes and models (mesh generation, modeling, loads and boundary conditions, links between different modeling processes, resolution of linear systems, display of results etc..); vibration mechanics (modal and harmonic analysis, dynamics with shocks, direct transient dynamics, seismic analysis and aleatory dynamics, non-linear dynamics, dynamical sub-structuring); fluid-structure interactions (internal acoustics, mass, rigidity and damping); linear and non-linear thermal analysis; steels and metal industry (structure transformations); coupled problems (internal chaining, internal thermo-hydro-mechanical coupling, chaining with other codes); products and services. (J.S.)

  7. ANIMAL code

    Energy Technology Data Exchange (ETDEWEB)

    Lindemuth, I.R.

    1979-02-28

    This report describes ANIMAL, a two-dimensional Eulerian magnetohydrodynamic computer code. ANIMAL's physical model also appears. Formulated are temporal and spatial finite-difference equations in a manner that facilitates implementation of the algorithm. Outlined are the functions of the algorithm's FORTRAN subroutines and variables.

  8. Network Coding

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 15; Issue 7. Network Coding. K V Rashmi Nihar B Shah P Vijay Kumar. General Article Volume 15 Issue 7 July 2010 pp 604-621. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/015/07/0604-0621 ...

  9. ANIMAL code

    International Nuclear Information System (INIS)

    Lindemuth, I.R.

    1979-01-01

    This report describes ANIMAL, a two-dimensional Eulerian magnetohydrodynamic computer code. ANIMAL's physical model also appears. Formulated are temporal and spatial finite-difference equations in a manner that facilitates implementation of the algorithm. Outlined are the functions of the algorithm's FORTRAN subroutines and variables

  10. Expander Codes

    Indian Academy of Sciences (India)

    Codes and Channels. A noisy communication channel is illustrated in Fig- ... nication channel. Suppose we want to transmit a message over the unreliable communication channel so that even if the channel corrupts some of the bits we are able to recover ..... is d-regular, meaning thereby that every vertex has de- gree d.

  11. Expander Codes

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 10; Issue 1. Expander Codes - The Sipser–Spielman Construction. Priti Shankar. General Article Volume 10 ... Author Affiliations. Priti Shankar1. Department of Computer Science and Automation, Indian Institute of Science Bangalore 560 012, India.

  12. Network Coding

    Indian Academy of Sciences (India)

    Network coding is a technique to increase the amount of information °ow in a network by mak- ing the key observation that information °ow is fundamentally different from commodity °ow. Whereas, under traditional methods of opera- tion of data networks, intermediate nodes are restricted to simply forwarding their incoming.

  13. CITATION-LDI2, 2-D Multigroup Diffusion, Perturbation, Criticality Search, for PC

    International Nuclear Information System (INIS)

    2001-01-01

    1 - Description of program or function: CITATION is designed to solve problems using the finite difference representation of neutron diffusion theory, treating up to three space dimensions with arbitrary group to group scattering. X-y-z, theta-r-z, hexagonal z, and trigonal z geometries may be treated. Depletion problems may be solved and fuel managed for multi-cycle analysis. Extensive first order perturbation results may be obtained given microscopic data and nuclide concentrations. Statics problems may be solved and perturbation results obtained with microscopic data. This version of CITATION was released by ORNL as CITATION - Rev. 2, Supplement 3 in July 1972 and ran on mainframes. It was first ported to PC by AECL in October 1988. CITATION-PC included in the March 1996 package involved minor changes including the removal of overlay statements introduced in 1988. CITALDI-PC is a new modified version with list-directed input. The codes in this package accept cross sections in CITATION format. Macroscopic data may be entered according to format specifications in Section 008 of the published report. Microscopic data format is specified in Section 105. There are no codes in RSIC's code collection to generate data in CITATION format. 2 - Method of solution: Explicit, finite difference approximations in space and time have been implemented. The neutron-flux-eigenvalue problems are solved by direct iteration to determine the multiplication factor or the nuclide densities required for a critical system

  14. Ultrasonic Control of welded joints by using specific PC generated AVG diagrams

    International Nuclear Information System (INIS)

    Rondon Torriente, S.; Galeano Alvarez, N.J.; Frometas Castillo, T.; Gonzalez Mastrapa, J.J. Unidad Presupuestada Inversionista Para la Construccion de la Central Electronuclear de Juragua, Juragua . Laboratorio de Metales.

    1996-01-01

    This paper describes an algoritm easy to be implemented in a modern personnel computer (PC), which can be used to obtain the specific AVG diagrams required during the ultrasonic control of welded joints by the AVG method. The algoritm is illustrated by means of the derivation of some specific diagrams corresponding to given inspection testing. Also some results and standard practices given in recent issues of several international codes are outlined, which can be used in recent issues of several international codes are outlined, which can be used to overcome common problems founded during the practical use of the AVG method with conventional shear wave ultrasonic transducers

  15. Panda code

    International Nuclear Information System (INIS)

    Altomare, S.; Minton, G.

    1975-02-01

    PANDA is a new two-group one-dimensional (slab/cylinder) neutron diffusion code designed to replace and extend the FAB series. PANDA allows for the nonlinear effects of xenon, enthalpy and Doppler. Fuel depletion is allowed. PANDA has a completely general search facility which will seek criticality, maximize reactivity, or minimize peaking. Any single parameter may be varied in a search. PANDA is written in FORTRAN IV, and as such is nearly machine independent. However, PANDA has been written with the present limitations of the Westinghouse CDC-6600 system in mind. Most computation loops are very short, and the code is less than half the useful 6600 memory size so that two jobs can reside in the core at once. (auth)

  16. VENTURE-PC 1.1, Reactor Analysis System with Sensitivity and Burnup

    International Nuclear Information System (INIS)

    2002-01-01

    1 - Description of program or function: The VENTURE program solves the usual neutronics eigenvalue, adjoint, fixed source, and criticality search problems. It treats up to three dimensions, maps power density, and does first-order perturbation analysis at the macroscopic cross section level. The BURNER code solves the nuclide chain equations to estimate the nuclide concentrations and burnup at the end of an exposure time or after a shutdown period. This package is based on the CCC-459/BOLD VENTURE IV code system developed at Oak Ridge National Laboratory. In January 1989 the University of Cincinnati contributed the first VENTURE-PC package to RSICC's collection. It was a subset of the mainframe version consisting of the VENTURE and BURNER modules plus several processing modules. VENTURE-PC was distributed as CCC-459 until July 1997 when a new version (with updated source code compatible with newer FORTRAN-77 compilers, some revisions, and extensions to solve much larger problems) was contributed by Argonne National Laboratory. The principle code modules included in the VENTURE-PC system are: VENTURE: Multigroup neutronics finite-difference diffusion theory. BURNER: Depletion calculation for reactor core analysis. Other modules within VENTURE-PC are: DVENTR: Venture input processor; DCRSPR: Neutron cross section processor; DUTLIN: Control file (CNTRL) input processor; DCMACR: Citation format cross section input processor; CRXSPR: Cross section processor; DENMAN: Fuel repositioning module. In August of 1999, Argonne again contributed an updated version of the code which overcomes problem size constraints caused by binary record length limits inherent to the Fortran 90 compiler. The need for long records is detected and avoided by sub-blocking them. Also, the latest Fortran 95 compiler offers substantial speed gains on the newest processors. The source code is updated to be compatible with either Fortran 90 or Fortran 95. In August 2002, the package was updated with

  17. PC 386-based version of DORT

    International Nuclear Information System (INIS)

    Tanker, E.

    1992-01-01

    Problems encountered during the adaptation of DORT on a personal computer using a Fortran77 compiler are described, modifications done to solve these are explained. Three test cases were run with the modified version and results are compared with those obtained on an IBM 3090/200. Numerical differences were observed in the last three decimal digits of the computations at most. The running times on the PC were found to be satisfactory for these test cases

  18. PC imaging system for reactor NDE

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    PC-based systems have been given recent attention by EPRI to organize and manage inspection data (RP-2405-15, TestPro system); integrate with larger, mainframe computers to maintain dialogue for on-site and remote applications; and, in this project, to aid the operator in providing guidance to render decisions on the data. The PC system configuration for this project consisted of a central processing unit (CPU), a hard disk and a floppy disk, 640K bytes of system memory, a high-resolution graphics card and compatible color monitor, and a mouse for operator interaction with software. The software package was written in FORTRAN under the PC Disk Operating System (PC-DOS) and utilized a graphics package for image display. Application of this package to crack-counterbore discrimination in piping welds was investigated. Present automatic techniques utilize signal features from single, A-scan data to render a decision on whether the reflector is benign (i.e., counterbore, weld root) or a crack. However, experienced manual operators in the field make reliable decisions based on the integrated response from the reflector as the transducer is scanned past the suspicious region. Since this software package could display and manipulate ensemble A-scans, spatial features - similar to those used by experts - were developed as discriminants. Ultrasonic responses from intergranular stress corrosion cracks (IGSCCs) were discovered to vary both in time-of-flight and in their amplitude, whereas counterbore responses were more consistent. The software package contains methods for viewing and quantifying these spatial features

  19. PC Based wireless stepper motor control

    OpenAIRE

    Jamal, Omar; Khan, Shahnawaz; Abideen, Zainul

    2013-01-01

    This project is about making an embedded system in order to control different functionalities of a stepper motor. The main functions of this stepper motor are to control the speed and direction. The whole hardware consists of two parts. One is the transmitter side and the other side is the receiver side. The transmitter side consists of PC, Encoder, a microcontroller and RF (Radio Frequency) transmitter. On the receiver side there is an RF receiver, a decoder, a microcontroller, a motor drive...

  20. Virtual Reality at the PC Level

    Science.gov (United States)

    Dean, John

    1998-01-01

    The main objective of my research has been to incorporate virtual reality at the desktop level; i.e., create virtual reality software that can be run fairly inexpensively on standard PC's. The standard language used for virtual reality on PC's is VRML (Virtual Reality Modeling Language). It is a new language so it is still undergoing a lot of changes. VRML 1.0 came out only a couple years ago and VRML 2.0 came out around last September. VRML is an interpreted language that is run by a web browser plug-in. It is fairly flexible in terms of allowing you to create different shapes and animations. Before this summer, I knew very little about virtual reality and I did not know VRML at all. I learned the VRML language by reading two books and experimenting on a PC. The following topics are presented: CAD to VRML, VRML 1.0 to VRML 2.0, VRML authoring tools, VRML browsers, finding virtual reality applications, the AXAF project, the VRML generator program, web communities and future plans.

  1. Characteristics of CoPc/CdS hybrid diode device

    Indian Academy of Sciences (India)

    CdS/CoPc hybrid heterojunctions were fabricated and characterized. CdS films were deposited by the spray pyrolysis technique on indium tin oxide (ITO)-coated glass substrates and CoPc films coated on CdS by chemical precipitation. Ag contact metal deposited on CoPc by e-beam evaporation and glass/ITO/CdS/ ...

  2. 39 CFR 501.16 - PC postage payment methodology.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false PC postage payment methodology. 501.16 Section 501.16 Postal Service UNITED STATES POSTAL SERVICE POSTAGE PROGRAMS AUTHORIZATION TO MANUFACTURE AND DISTRIBUTE POSTAGE EVIDENCING SYSTEMS § 501.16 PC postage payment methodology. (a) The PC Postage customer is...

  3. From concatenated codes to graph codes

    DEFF Research Database (Denmark)

    Justesen, Jørn; Høholdt, Tom

    2004-01-01

    We consider codes based on simple bipartite expander graphs. These codes may be seen as the first step leading from product type concatenated codes to more complex graph codes. We emphasize constructions of specific codes of realistic lengths, and study the details of decoding by message passing...

  4. IBM PC/IX operating system evaluation plan

    Science.gov (United States)

    Dominick, Wayne D. (Editor); Granier, Martin; Hall, Philip P.; Triantafyllopoulos, Spiros

    1984-01-01

    An evaluation plan for the IBM PC/IX Operating System designed for IBM PC/XT computers is discussed. The evaluation plan covers the areas of performance measurement and evaluation, software facilities available, man-machine interface considerations, networking, and the suitability of PC/IX as a development environment within the University of Southwestern Louisiana NASA PC Research and Development project. In order to compare and evaluate the PC/IX system, comparisons with other available UNIX-based systems are also included.

  5. PC Software for Artificial Intelligence Applications.

    Science.gov (United States)

    Epp, H; Kalin, M; Miller, D

    1988-05-06

    Our review has emphasized that AI tools are programming languages inspired by some problem-solving paradigm. We want to underscore their status as programming languages; even if an AI tool seems to fit a problem perfectly, its proficient use still requires the training and practice associated with any programming language. The programming manuals for PC-Plus, Smalltalk/ V, and Nexpert Object are all tutorial in nature, and the corresponding software packages come with sample applications. We find the manuals to be uniformly good introductions that try to anticipate the problems of a user who is new to the technology. All three vendors offer free technical support by telephone to licensed users. AI tools are sometimes oversold as a way to make programming easy or to avoid it altogether. The truth is that AI tools demand programming-but programming that allows you to concentrate on the essentials of the problem. If we had to implement a diagnostic system, we would look first to a product such as PC-Plus rather than BASIC or C, because PC-Plus is designed specifically for such a problem, whereas these conventional languages are not. If we had to implement a system that required graphical interfaces and could benefit from inheritance, we would look first to an object-oriented system such as Smalltalk/V that provides built-in mechanisms for both. If we had to implement an expert system that called for some mix of AI and conventional techniques, we would look first to a product such as Nexpert Object that integrates various problem-solving technologies. Finally, we might use FORTRAN if we were concerned primarily with programming a well-defined numerical algorithm. AI tools are a valuable complement to traditional languages.

  6. Securing your PC and protecting your privacy.

    Science.gov (United States)

    Schloman, Barbara F

    2004-10-22

    Working in a networked information environment brings new opportunities for getting and sharing information. Regrettably, these benefits of the Internet are challenged by forces that would interfere to satisfy their own profit or malevolent motives. Your networked computer can be infected by viruses, worms, or Trojan horses or infiltrated by spyware, adware, or pop-ups. Without being aware of the dangers and taking precautionary steps, your PC is susceptible to being compromised and your privacy invaded. This column will highlight some of the dangers and offer basic steps for securing your computer and protecting your privacy.

  7. Evaluation of FPGA to PC feedback loop

    Science.gov (United States)

    Linczuk, Pawel; Zabolotny, Wojciech M.; Wojenski, Andrzej; Krawczyk, Rafal D.; Pozniak, Krzysztof T.; Chernyshova, Maryna; Czarski, Tomasz; Gaska, Michal; Kasprowicz, Grzegorz; Kowalska-Strzeciwilk, Ewa; Malinowski, Karol

    2017-08-01

    The paper presents the evaluation study of the performance of the data transmission subsystem which can be used in High Energy Physics (HEP) and other High-Performance Computing (HPC) systems. The test environment consisted of Xilinx Artix-7 FPGA and server-grade PC connected via the PCIe 4xGen2 bus. The DMA engine was based on the Xilinx DMA for PCI Express Subsystem1 controlled by the modified Xilinx XDMA kernel driver.2 The research is focused on the influence of the system configuration on achievable throughput and latency of data transfer.

  8. Verification of the CONPAS (CONtainment Performance Analysis System) code package

    International Nuclear Information System (INIS)

    Kim, See Darl; Ahn, Kwang Il; Song, Yong Man; Choi, Young; Park, Soo Yong; Kim, Dong Ha; Jin, Young Ho.

    1997-09-01

    CONPAS is a computer code package to integrate the numerical, graphical, and results-oriented aspects of Level 2 probabilistic safety assessment (PSA) for nuclear power plants under a PC window environment automatically. For the integrated analysis of Level 2 PSA, the code utilizes four distinct, but closely related modules: (1) ET Editor, (2) Computer, (3) Text Editor, and (4) Mechanistic Code Plotter. Compared with other existing computer codes for Level 2 PSA, and CONPAS code provides several advanced features: computational aspects including systematic uncertainty analysis, importance analysis, sensitivity analysis and data interpretation, reporting aspects including tabling and graphic as well as user-friendly interface. The computational performance of CONPAS has been verified through a Level 2 PSA to a reference plant. The results of the CONPAS code was compared with an existing level 2 PSA code (NUCAP+) and the comparison proves that CONPAS is appropriate for Level 2 PSA. (author). 9 refs., 8 tabs., 14 figs

  9. User`s guide and documentation manual for ``PC-Gel`` simulator

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Ming-Ming; Gao, Hong W.

    1993-10-01

    PC-GEL is a three-dimensional, three-phase (oil, water, and gas) permeability modification simulator developed by incorporating an in-situ gelation model into a black oil simulator (BOAST) for personal computer application. The features included in the simulator are: transport of each chemical species of the polymer/crosslinker system in porous media, gelation reaction kinetics of the polymer with crosslinking agents, rheology of the polymer and gel, inaccessible pore volume to macromolecules, adsorption of chemical species on rock surfaces, retention of gel on the rock matrix, and permeability reduction caused by the adsorption of polymer and gel. The in-situ gelation model and simulator were validated against data reported in the literature. The simulator PC-GEL is useful for simulating and optimizing any combination of primary production, waterflooding, polymer flooding, and permeability modification treatments. A general background of permeability modification using crosslinked polymer gels is given in Section I and the governing equations, mechanisms, and numerical solutions of PC-GEL are given in Section II. Steps for preparing an input data file with reservoir and gel-chemical transport data, and recurrent data are described in Sections III and IV, respectively. Example data inputs are enclosed after explanations of each input line to help the user prepare data files. Major items of the output files are reviewed in Section V. Finally, three sample problems for running PC-GEL are described in Section VI, and input files and part of the output files of these problems are listed in the appendices. For the user`s reference a copy of the source code of PC-GEL computer program is attached in Appendix A.

  10. Automatic coding method of the ACR Code

    International Nuclear Information System (INIS)

    Park, Kwi Ae; Ihm, Jong Sool; Ahn, Woo Hyun; Baik, Seung Kook; Choi, Han Yong; Kim, Bong Gi

    1993-01-01

    The authors developed a computer program for automatic coding of ACR(American College of Radiology) code. The automatic coding of the ACR code is essential for computerization of the data in the department of radiology. This program was written in foxbase language and has been used for automatic coding of diagnosis in the Department of Radiology, Wallace Memorial Baptist since May 1992. The ACR dictionary files consisted of 11 files, one for the organ code and the others for the pathology code. The organ code was obtained by typing organ name or code number itself among the upper and lower level codes of the selected one that were simultaneous displayed on the screen. According to the first number of the selected organ code, the corresponding pathology code file was chosen automatically. By the similar fashion of organ code selection, the proper pathologic dode was obtained. An example of obtained ACR code is '131.3661'. This procedure was reproducible regardless of the number of fields of data. Because this program was written in 'User's Defined Function' from, decoding of the stored ACR code was achieved by this same program and incorporation of this program into program in to another data processing was possible. This program had merits of simple operation, accurate and detail coding, and easy adjustment for another program. Therefore, this program can be used for automation of routine work in the department of radiology

  11. Fundamentals of convolutional coding

    CERN Document Server

    Johannesson, Rolf

    2015-01-01

    Fundamentals of Convolutional Coding, Second Edition, regarded as a bible of convolutional coding brings you a clear and comprehensive discussion of the basic principles of this field * Two new chapters on low-density parity-check (LDPC) convolutional codes and iterative coding * Viterbi, BCJR, BEAST, list, and sequential decoding of convolutional codes * Distance properties of convolutional codes * Includes a downloadable solutions manual

  12. High frequency coded imaging system with RF.

    Science.gov (United States)

    Lewandowski, Marcin; Nowicki, Andrzej

    2008-08-01

    Coded transmission is an approach to solve the inherent compromise between penetration and resolution required in ultrasound imaging. Our goal was to examine the applicability of the coded excitation to HF (20-35 MHz) ultrasound imaging. A novel real-time imaging system for research and evaluation of the coded transmission was developed. The digital programmable coder- digitizer module based on the field programmable gate array (FPGA) chip supports arbitrary waveform coded transmission and RF echo sampling up to 200 megasamples per second, as well as real-time streaming of digitized RF data via a high-speed USB interface to the PC. All RF and image data processing were implemented in the software. A novel balanced software architecture supports real-time processing and display at rates up to 30 frames/sec. The system was used to acquire quantitative data for sine burst and 16-bit Golay code excitation at 20 MHz fundamental frequency. SNR gain close to 14 dB was obtained. The example of the skin scan clearly shows the extended penetration and improved contrast when a 35-MHz Golay code is used. The system presented is a practical and low-cost implementation of a coded excitation technique in HF ultrasound imaging that can be used as a research tool as well as to be introduced into production.

  13. Development of NUPREP PC Version and Input Structures for NUCIRC Single Channel Analyses

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Churl; Jun, Ji Su; Park, Joo Hwan

    2007-12-15

    The input file for a steady-state thermal-hydraulic code NUCIRC consists of common channel input data and specific channel input data in a case of single channel analysis. Even when all the data is ready for the 380 channels' single channel analyses, it takes long time and requires enormous effort to compose an input file by hand-editing. The automatic pre-processor for this tedious job is a NUPREP code. In this study, a NUPREP PC version has been developed from the source list in the program manual of NUCIRC-MOD2.000 that is imported in a form of an execution file. In this procedure, some errors found in PC executions and lost statements are fixed accordingly. It is confirmed that the developed NUPREP code produces input file correctly for the CANDU-6 single channel analysis. Additionally, the NUCIRC input structure and data format are summarized for a single channel analysis and the input CARDs required for the creep information of aged channels are listed.

  14. Development of NUPREP PC Version and Input Structures for NUCIRC Single Channel Analyses

    International Nuclear Information System (INIS)

    Yoon, Churl; Jun, Ji Su; Park, Joo Hwan

    2007-12-01

    The input file for a steady-state thermal-hydraulic code NUCIRC consists of common channel input data and specific channel input data in a case of single channel analysis. Even when all the data is ready for the 380 channels' single channel analyses, it takes long time and requires enormous effort to compose an input file by hand-editing. The automatic pre-processor for this tedious job is a NUPREP code. In this study, a NUPREP PC version has been developed from the source list in the program manual of NUCIRC-MOD2.000 that is imported in a form of an execution file. In this procedure, some errors found in PC executions and lost statements are fixed accordingly. It is confirmed that the developed NUPREP code produces input file correctly for the CANDU-6 single channel analysis. Additionally, the NUCIRC input structure and data format are summarized for a single channel analysis and the input CARDs required for the creep information of aged channels are listed

  15. The readout performance evaluation of PowerPC

    International Nuclear Information System (INIS)

    Chu Yuanping; Zhang Hongyu; Zhao Jingwei; Ye Mei; Tao Ning; Zhu Kejun; Tang Suqiu; Guo Yanan

    2003-01-01

    PowerPC, as a powerful low-cost embedded computer, is one of the very important research objects in recent years in the project of BESIII data acquisition system. The researches on the embedded system and embedded computer have achieved many important results in the field of High Energy Physics especially in the data acquisition system. The one of the key points to design an acquisition system using PowerPC is to evaluate the readout ability of PowerPC correctly. The paper introduce some tests for the PowerPC readout performance. (authors)

  16. Design of multichannel counting system for IBM PC and compatibles

    International Nuclear Information System (INIS)

    Majeed, B.; Ahmad, Z.; Osman, A.; Ysain, M.M.

    1995-07-01

    A Multichannel Counting System (MCCS), based on IBM-PC and compatible computer systems have been designed. The MCCS consists of a Multichannel Counting System plug-in interface card (MCCS-PC) for IBM PC and compatibles and a NIM-BIN module (MCCS-NB). The MCCS-PC provides simultaneous monitoring of upto seven independent SCA type inputs. An on board programmable timer provides elapsed time measurement. A menu-driven program for data acquisition and timer control has also been developed. (author) 8 figs

  17. Neural nets for radio Morse code recognizing

    Science.gov (United States)

    Fu, Hsin-Chia; Lin, Y. Y.; Pao, Hsiao-Tien

    1993-09-01

    This paper proposes a neural network recognition system for hand keying Radio Morse codes. The system has been trained and tested on real world data recorded from amateur radio Morse codes. The overall recognizing process can be partitioned into 3 major parts, the preprocessing, the feature extracting, and the character decoding. The whole operation is able to be performed in real-time on a PC/486 system. Self-Organizing Maps are used intensively in the recognition system to adaptively learn the variation of the Morse code signal. The average performance of the recognition system has been achieved about 96.4% with a rejection rate of 6.5%. It is hoped that many of the techniques would be applicable to a wide range of DSP and recognition tasks.

  18. PC-BEIS: a personal computer version of the biogenic emissions inventory system

    International Nuclear Information System (INIS)

    Pierce, T.E.; Waldruff, P.S.

    1991-01-01

    The US Environmental Protection Agency's Biogenic Emissions Inventory System (BEIS) has been adapted for use on IBM-compatible personal computers (PCs). PC-BEIS estimates hourly emissions of isoprene, α-pinene, other monoterpenes, and unidentified hydrocarbons for any county in the contiguous United States. To run the program, users must provide hourly data on ambient temperature, relative humidity, wind speed, cloud cover, and a code that identifies the particular county. This paper provides an overview of the method used to calculate biogenic emissions, shows an example application, and gives information on how to obtain a copy of the program

  19. Study of nuclear computer code maintenance and management system

    International Nuclear Information System (INIS)

    Ryu, Chang Mo; Kim, Yeon Seung; Eom, Heung Seop; Lee, Jong Bok; Kim, Ho Joon; Choi, Young Gil; Kim, Ko Ryeo

    1989-01-01

    Software maintenance is one of the most important problems since late 1970's.We wish to develop a nuclear computer code system to maintenance and manage KAERI's nuclear software. As a part of this system, we have developed three code management programs for use on CYBER and PC systems. They are used in systematic management of computer code in KAERI. The first program is embodied on the CYBER system to rapidly provide information on nuclear codes to the users. The second and the third programs were embodied on the PC system for the code manager and for the management of data in korean language, respectively. In the requirement analysis, we defined each code, magnetic tape, manual and abstract information data. In the conceptual design, we designed retrieval, update, and output functions. In the implementation design, we described the technical considerations of database programs, utilities, and directions for the use of databases. As a result of this research, we compiled the status of nuclear computer codes which belonged KAERI until September, 1988. Thus, by using these three database programs, we could provide the nuclear computer code information to the users more rapidly. (Author)

  20. Tachykinins Processing is Significantly Impaired in PC1 and PC2 Mutant Mouse Spinal Cord S9 Fractions.

    Science.gov (United States)

    Saidi, Mouna; Kamali, Soufiane; Ruiz, Alberto Orduna; Beaudry, Francis

    2015-11-01

    Substance P (SP) play a central role in nociceptive transmission and it is an agonist of the Neurokinin-1 receptor located in the lamina I of the spinal cord. SP is a major proteolytic product of the protachykinin-1 primarily synthesized in neurons. Proprotein convertases (PCs) are extensively expressed in the central nervous system and specifically cleave at C-terminal of either a pair of basic amino acids, or a single basic residue. The proteolysis control of endogenous protachykinins has a profound impact on pain perception and the role of PCs remain unclear. The objective of this study was to decipher the role of PC1 and PC2 in the proteolysis surrogate protachykinins (i.e. Tachykinin 20-68 and Tachykinin 58-78) using cellular fractions of spinal cords from wild type (WT), PC1(-/+) and PC2(-/+) animals and mass spectrometry. Full-length Tachykinin 20-68 and Tachykinin 58-78 was incubated for 30 min in WT, PC1(-/+) and PC2(-/+) mouse spinal cord S9 fractions and specific C-terminal peptide fragments were identified and quantified by mass spectrometry. The results clearly demonstrate that both PC1 and PC2 mediate the formation of SP and Tachykinin 58-71, an important SP precursor, with over 50 % reduction of the rate of formation in mutant PC1 and PC2 mouse S9 spinal cord fractions. The results obtained revealed that PC1 and PC2 are involved in the C-terminal processing of protachykinin peptides and suggest a major role in the maturation of the protachykinin-1 protein.

  1. Model Children's Code.

    Science.gov (United States)

    New Mexico Univ., Albuquerque. American Indian Law Center.

    The Model Children's Code was developed to provide a legally correct model code that American Indian tribes can use to enact children's codes that fulfill their legal, cultural and economic needs. Code sections cover the court system, jurisdiction, juvenile offender procedures, minor-in-need-of-care, and termination. Almost every Code section is…

  2. Affine Grassmann codes

    DEFF Research Database (Denmark)

    Høholdt, Tom; Beelen, Peter; Ghorpade, Sudhir Ramakant

    2010-01-01

    We consider a new class of linear codes, called affine Grassmann codes. These can be viewed as a variant of generalized Reed-Muller codes and are closely related to Grassmann codes.We determine the length, dimension, and the minimum distance of any affine Grassmann code. Moreover, we show that af...

  3. COMBINE/PC - a portable neutron spectrum and cross-section generation program

    International Nuclear Information System (INIS)

    Nigg, D.W.; Grimesey, R.A.; Curtis, R.L.

    1990-01-01

    Use of personal computers and engineering workstations for complex scientific computations has expanded rapidly in the past few years. This trend is expected to continue in the future with the introduction of increasingly sophisticated microprocessors and microcomputer systems. In response to this, an integrated system of neutronics and radiation transport software suitable for operation in an IBM personal computer (PC)-class environment has been under development at the Idaho National Engineering Laboratory (INEL) for the past 3 years. A key component of this system will be module to produce application-specific multigroup cross-section libraries that can be used in various neutron transport and diffusion theory code modules. This software module, referred to as COMBINE/PC, was recently completed at INEL and is the subject of this paper. COMBINE/PC was developed to provide an ENDF/B-based neutron cross-section generation capability of sufficient sophistication to handle a wide variety of practical fission and fusion-related applications while maintaining a compact machine-independent structure

  4. PC2 Ovotransferrin: Characterization and Alternative Immunotherapeutic Activity

    Directory of Open Access Journals (Sweden)

    Constantin Chiurciu

    2017-01-01

    Full Text Available Characterization and evaluation of immunotherapeutic potential of ovotransferrin PC2 (OTf PC2 were performed in this study. The ovoprotein was obtained from egg white from hens immunized with bacterial antigens, pathogenic for humans. For the negative control samples, OTf was extracted from eggs collected from Specific Pathogen-Free (SPF hens and purified by affinity chromatography on Protein G-agarose column with two eluting peaks: I, representing ovalbumin, and II, ovotransferrin. The final apo-OTf form was reached by successive precipitation with ammonium sulfate and citric acid and the holo-OTf form by saturating the apo-form with FeCl3. Multiple OTf PC2 samples were analyzed through Sodium Dodecyl Sulfate-Polyacrylamide Gel Electrophoresis (SDS-PAGE and, based on the molecular marker migration model, the ovotransferrin (76.5 kDa and ovalbumin (45 kDa were detected. The agglutination reaction exhibited statistically significant high specificity of the multiple OTf PC2, by reacting with the antigens used for hens’ immunization. Following ELISA, it was established that OTf PC2 from hyperimmune eggs has specificity for all antigens; the antibody titer was high, indicating that OTf PC2 possesses immunological properties similar to immunoglobulin Y (Ig Y. This study suggests that OTf PC2 immunological activity may play a crucial role in the prevention and treatment of infections resistant to antibiotics and OTf PC2 can also act as a valuable nutraceutical.

  5. PrPC from stem cells to cancer

    Directory of Open Access Journals (Sweden)

    Séverine eMartin-Lannerée

    2014-09-01

    Full Text Available The cellular prion protein PrPC was initially discovered as the normal counterpart of the pathological scrapie prion protein PrPSc, the main component of the infectious agent of Transmissible Spongiform Encephalopathies. While clues as to the physiological function of this ubiquitous protein were greatly anticipated from the development of knock-out animals, PrP-null mice turned out to be viable and to develop without major phenotypic abnormalities. Notwithstanding, the discovery that hematopoietic stem cells from PrP-null mice have impaired long-term repopulating potential has set the stage for investigating into the role of PrPC in stem cell biology. A wealth of data have now exemplified that PrPC is expressed in distinct types of stem cells and regulates their self-renewal as well as their differentiation potential. A role for PrPC in the fate restriction of embryonic stem cells has further been proposed. Paralleling these observations, an overexpression of PrPC has been documented in various types of tumours. In line with the contribution of PrPC to stemness and to the proliferation of cancer cells, PrPC was recently found to be enriched in subpopulations of tumour-initiating cells. In the present review, we summarize the current knowledge of the role played by PrPC in stem cell biology and discuss how the subversion of its function may contribute to cancer progression.

  6. Haplotype combination of the caprine PC1 gene sequence variants ...

    Indian Academy of Sciences (India)

    Proprotein convertase 1 (PC1) is an endopeptidase involved in proteolytic processing of peptide hormone precursors in granules of the regulated secretory pathway of endocrine cells. Mutations in PC1 gene are related to obesity-related traits which may influence the performance of animals, and therefore it has been the ...

  7. Haplotype combination of the caprine PC1 gene sequence variants ...

    Indian Academy of Sciences (India)

    Mutations in PC1 gene are related to obesity-related traits which may influence the performance of animals, and therefore it has been the focus of this study. In this study, polymorphisms of the caprine PC1 gene were detected in. 407 individuals from three breeds by PCR-SSCP and DNA sequencing methods. The results ...

  8. PC development gives Baptist Medical Center mainframe power.

    Science.gov (United States)

    Kador, J

    1991-01-01

    Sophisticated distributed applications are easier to develop and maintain when prototyped using personal computer (PC) technology. Baptist Medical System, the largest hospital system in Arkansas, is using PC technology to prototype and then develop mainframe-based applications that augment mission-critical, distributed systems.

  9. Combinatorial code of growth factors and neuropeptides define neuroendocrine differentiation in PC12 cells.

    NARCIS (Netherlands)

    Beaujean, D.; Rosenbaum, C.; Muller, H.W.; Willemsen, J.J.; Lenders, J.W.M.; Bornstein, S.R.

    2003-01-01

    Adrenal chromaffin cells constitute one of the first cell types to have been defined as a neuroendocrine cell type. Since they produce dopamine, these cells have been proposed for the treatment of neuronal deficits in human Parkinson's disease. However, the factors involved in the development of

  10. Progress on DART code optimization

    International Nuclear Information System (INIS)

    Taboada, Horacio; Solis, Diego; Rest, Jeffrey

    1999-01-01

    This work consists about the progress made on the design and development of a new optimized version of DART code (DART-P), a mechanistic computer model for the performance calculation and assessment of aluminum dispersion fuel. It is part of a collaboration agreement between CNEA and ANL in the area of Low Enriched Uranium Advanced Fuels. It is held by the Implementation Arrangement for Technical Exchange and Cooperation in the Area of Peaceful Uses of Nuclear Energy, signed on October 16, 1997 between US DOE and the National Atomic Energy Commission of the Argentine Republic. DART optimization is a biannual program; it is operative since February 8, 1999 and has the following goals: 1. Design and develop a new DART calculation kernel for implementation within a parallel processing architecture. 2. Design and develop new user-friendly I/O routines to be resident on Personal Computer (PC)/WorkStation (WS) platform. 2.1. The new input interface will be designed and developed by means of a Visual interface, able to guide the user in the construction of the problem to be analyzed with the aid of a new database (described in item 3, below). The new I/O interface will include input data check controls in order to avoid corrupted input data. 2.2. The new output interface will be designed and developed by means of graphical tools, able to translate numeric data output into 'on line' graphic information. 3. Design and develop a new irradiated materials database, to be resident on PC/WS platform, so as to facilitate the analysis of the behavior of different fuel and meat compositions with DART-P. Currently, a different version of DART is used for oxide, silicide, and advanced alloy fuels. 4. Develop rigorous general inspection algorithms in order to provide valuable DART-P benchmarks. 5. Design and develop new models, such as superplasticity, elastoplastic feedback, improved models for the calculation of fuel deformation and the evolution of the fuel microstructure for

  11. Generalized concatenated quantum codes

    International Nuclear Information System (INIS)

    Grassl, Markus; Shor, Peter; Smith, Graeme; Smolin, John; Zeng Bei

    2009-01-01

    We discuss the concept of generalized concatenated quantum codes. This generalized concatenation method provides a systematical way for constructing good quantum codes, both stabilizer codes and nonadditive codes. Using this method, we construct families of single-error-correcting nonadditive quantum codes, in both binary and nonbinary cases, which not only outperform any stabilizer codes for finite block length but also asymptotically meet the quantum Hamming bound for large block length.

  12. Rateless feedback codes

    DEFF Research Database (Denmark)

    Sørensen, Jesper Hemming; Koike-Akino, Toshiaki; Orlik, Philip

    2012-01-01

    This paper proposes a concept called rateless feedback coding. We redesign the existing LT and Raptor codes, by introducing new degree distributions for the case when a few feedback opportunities are available. We show that incorporating feedback to LT codes can significantly decrease both...... the coding overhead and the encoding/decoding complexity. Moreover, we show that, at the price of a slight increase in the coding overhead, linear complexity is achieved with Raptor feedback coding....

  13. PC/FRAM, Version 3.2 User Manual

    International Nuclear Information System (INIS)

    Kelley, T.A.; Sampson, T.E.

    1999-01-01

    This manual describes the use of version 3.2 of the PC/FRAM plutonium isotopic analysis software developed in the Safeguards Science and Technology Group, NE-5, Nonproliferation and International Security Division Los Alamos National Laboratory. The software analyzes the gamma ray spectrum from plutonium-bearing items and determines the isotopic distribution of the plutonium 241Am content and concentration of other isotopes in the item. The software can also determine the isotopic distribution of uranium isotopes in items containing only uranium. The body of this manual descenies the generic version of the code. Special facility-specific enhancements, if they apply, will be described in the appendices. The information in this manual applies equally well to version 3.3, which has been licensed to ORTEC. The software can analyze data that is stored in a file on disk. It understands several storage formats including Canberra's S1OO format, ORTEC'S 'chn' and 'SPC' formats, and several ASCII text formats. The software can also control data acquisition using an MCA and then store the results in a file on disk for later analysis or analyze the spectrum directly after the acquisition. The software currently only supports the control of ORTEC MCB'S. Support for Canbema's Genie-2000 Spectroscopy Systems will be added in the future. Support for reading and writing CAM files will also be forthcoming. A versatile parameter fde database structure governs all facets of the data analysis. User editing of the parameter sets allows great flexibility in handling data with different isotopic distributions, interfering isotopes, and different acquisition parameters such as energy calibration, and detector type. This manual is intended for the system supervisor or the local user who is to be the resident expert. Excerpts from this manual may also be appropriate for the system operator who will routinely use the instrument

  14. Coding for dummies

    CERN Document Server

    Abraham, Nikhil

    2015-01-01

    Hands-on exercises help you learn to code like a pro No coding experience is required for Coding For Dummies,your one-stop guide to building a foundation of knowledge inwriting computer code for web, application, and softwaredevelopment. It doesn't matter if you've dabbled in coding or neverwritten a line of code, this book guides you through the basics.Using foundational web development languages like HTML, CSS, andJavaScript, it explains in plain English how coding works and whyit's needed. Online exercises developed by Codecademy, a leading online codetraining site, help hone coding skill

  15. Advanced video coding systems

    CERN Document Server

    Gao, Wen

    2015-01-01

    This comprehensive and accessible text/reference presents an overview of the state of the art in video coding technology. Specifically, the book introduces the tools of the AVS2 standard, describing how AVS2 can help to achieve a significant improvement in coding efficiency for future video networks and applications by incorporating smarter coding tools such as scene video coding. Topics and features: introduces the basic concepts in video coding, and presents a short history of video coding technology and standards; reviews the coding framework, main coding tools, and syntax structure of AV

  16. Disentangling the near-infrared continuum spectral components of the inner 500 pc of Mrk 573: two-dimensional maps

    Science.gov (United States)

    Diniz, M. R.; Riffel, R. A.; Riffel, R.; Crenshaw, D. M.; Storchi-Bergmann, T.; Fischer, T. C.; Schmitt, H. R.; Kraemer, S. B.

    2017-08-01

    We present a near-infrared (near-IR) study of the spectral components of the continuum in the inner 500 × 500 pc2 of the nearby Seyfert galaxy Mrk 573 using adaptive optics near-IR integral field spectroscopy with the instrument near-infrared integral field spectrograph of the Gemini North Telescope at a spatial resolution of ˜50 pc. We performed spectral synthesis using the starlight code and constructed maps for the contributions of different age components of the stellar population: young (age ≤100 Myr), young-intermediate (100 age ≤ 700 Myr), intermediate-old (700 Myr age ≤ 2 Gyr) and old (age > 2 Gyr) to the near-IR K-band continuum, as well as their contribution to the total stellar mass. We found that the old stellar population is dominant within the inner 250 pc, while the intermediate-age components dominate the continuum at larger distances. A young stellar component contributes up to ˜20 per cent within the inner ˜70 pc, while hot dust emission and featureless continuum components are also necessary to fit the nuclear spectrum, contributing up to 20 per cent of the K-band flux there. The radial distribution of the different age components in the inner kiloparsec of Mrk 573 is similar to those obtained by our group for the Seyfert galaxies Mrk 1066, Mrk 1157 and NGC 1068 in previous works using a similar methodology. Young stellar populations (≤100 Myr) are seen in the inner 200-300 pc for all galaxies contributing with ≥20 per cent of the K-band flux, while the near-IR continuum is dominated by the contribution of intermediate-age stars (t = 100 Myr-2 Gyr) at larger distances. Older stellar populations dominate in the inner 250 pc.

  17. A TDC-PC based DPAC spectrometer

    International Nuclear Information System (INIS)

    Mayer, A.; Lindgren, B.

    1988-09-01

    In spectroscopies like muon spin rotation or the time differential perturbed angular correlation method the experimentally determined quantity is a time interval between two events. The transformation of this time into a physically handy signal has in most cases been performed by a time-to-amplitude converter (TAC). The resulting voltage has been digitized in a separate analog-to-digital converter (ADC) and entered some type of multichannel analyser (MCA). Apart from not being very convenient the systems have some significant weaknesses: The available size of the total spectrum area is limited due to the MCA. Nonlinearities in TACs and ADCs and noise in the analog part are well known complications. There is no way to see the experimental result, besides the raw data, during the course of the experiment. Here a new type of data collecting system is described. The basic idea, is to substitute the TAC and EDC for a time-to-digital converter (TDC), that is coupled to a personal computer (PC). The computer, used here, is with 256 kbyte of memory, which is sufficient for both the data collection and for the TDC controlling and data treating program DEPACK. The spectrum area is variable, with a predefined standard size of 8 * 2048 channels. On-line data treatment can be performed with the DEPACK program. With the choice of a TDC all problems related to analog parts in the equipment can be circumvented. The TDC can measure both positive and negative times, which enables in a standard 4 detector setup, the simultaneous collection of 8 spectra. If not objected for other reasons, all fast circuit start and stop signals may access the TDC. Since the maximum conversion frequency of the module is 1 MHz an overload protection is not required

  18. PC Farms for Offline Event Reconstruction at Fermilab

    International Nuclear Information System (INIS)

    Beretvas, A.

    1997-03-01

    Fermilab is investigating the use of PC's for HEP computing. As a first step we have built a full offline environment under Linux on a set of Pentium (P5) and Pentium Pro (P6) machines (the ''PC Farm''). The Pythia simulation has been ported to run serially and in parallel (using CPS) on the PC Farm. Fermilab software products and CDF offline packages have also been ported to Linux. Run 1 CDF data has been analyzed on both Linux and SGI (Irix) with essentially identical results. The performance of the system is compared to results with commercial UNIX systems

  19. Locally orderless registration code

    DEFF Research Database (Denmark)

    2012-01-01

    This is code for the TPAMI paper "Locally Orderless Registration". The code requires intel threadding building blocks installed and is provided for 64 bit on mac, linux and windows.......This is code for the TPAMI paper "Locally Orderless Registration". The code requires intel threadding building blocks installed and is provided for 64 bit on mac, linux and windows....

  20. Error Correcting Codes

    Indian Academy of Sciences (India)

    sound quality is, in essence, obtained by accurate waveform coding and decoding of the audio signals. In addition, the coded audio information is protected against disc errors by the use of a Cross Interleaved Reed-Solomon Code (CIRC). Reed-. Solomon codes were discovered by Irving Reed and Gus Solomon in 1960.

  1. Abnormal expression and processing of the proprotein convertases PC1 and PC2 in human colorectal liver metastases

    International Nuclear Information System (INIS)

    Tzimas, George N; Metrakos, Peter; Chevet, Eric; Jenna, Sarah; Nguyên, Duc Thang; Khatib, Abdel M; Marcus, Victoria; Zhang, Yi; Chrétien, Michel; Seidah, Nabil

    2005-01-01

    The family of proprotein convertases has been recently implicated in tumorigenesis and metastasis in animal models. However, these studies have not yet been completely corroborated in human tumors. Using RT PCR, immunoblot and immunohistochemistry we assessed the presence and the processing patterns of the convertases PC1 and PC2 as well as the PC2 specific chaperone 7B2 in human liver metastases originating from colorectal cancer and compared them to unaffected and normal liver. Furthermore, we assessed the presence and processing profiles of PC1, PC2 and 7B2 in primary colon cancers. mRNA, protein expression, and protein cleavage profiles of proprotein convertases 1 and 2 are altered in liver colorectal metastasis, compared to unaffected and normal liver. Active PC1 protein is overexpressed in tumor, correlating with its mRNA profile. Moreover, the enhanced PC2 processing pattern in tumor correlates with the overexpression of its specific binding protein 7B2. These results were corroborated by immunohistochemistry. The specific and uniform convertase pattern observed in the metastases was present only in a fraction of primary colon cancers. The uniformly altered proprotein convertase profile in liver metastases is observed only in a fraction of primary colon cancers, suggesting possible selection processes involving PCs during metastasis as well as an active role of PCs in liver metastasis. In addition, the exclusive presence of 7B2 in metastatic tumors may represent a new target for early diagnosis, prognosis and/or treatment

  2. Network Coding Taxonomy

    OpenAIRE

    Adamson , Brian; Adjih , Cédric; Bilbao , Josu; Firoiu , Victor; Fitzek , Frank; Samah , Ghanem ,; Lochin , Emmanuel; Masucci , Antonia; Montpetit , Marie-Jose; Pedersen , Morten V.; Peralta , Goiuri; Roca , Vincent; Paresh , Saxena; Sivakumar , Senthil

    2017-01-01

    Internet Research Task Force - Working document of the Network Coding Research Group (NWCRG), draft-irtf-nwcrg-network-coding-taxonomy-05 (work in progress), https://datatracker.ietf.org/doc/draft-irtf-nwcrg-network-coding-taxonomy/; This document summarizes a recommended terminology for Network Coding concepts and constructs. It provides a comprehensive set of terms with unique names in order to avoid ambiguities in future Network Coding IRTF and IETF documents. This document is intended to ...

  3. QR Codes 101

    Science.gov (United States)

    Crompton, Helen; LaFrance, Jason; van 't Hooft, Mark

    2012-01-01

    A QR (quick-response) code is a two-dimensional scannable code, similar in function to a traditional bar code that one might find on a product at the supermarket. The main difference between the two is that, while a traditional bar code can hold a maximum of only 20 digits, a QR code can hold up to 7,089 characters, so it can contain much more…

  4. A PC based seismic data transcription system

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Sang Yong; Chung, Bu Heung; Jang, Seong Hyung [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

    1997-12-01

    Old seismic data recorded on magnetic tapes is often difficult to read because of the tape sticking problem known as the `sticky syndrome`. It has to be transcribed to other suitable media using dedicated multiple systems during the whole project years. The first system requirement is the capability of reading gapless magnetic tape, which is peculiar to the old seismic data tapes. The second requirement would be the availability of storage devices with compact and huge capacity. The system must be cheap enough compared to the total cost of the data being transcribed. We introduce a PC based seismic data transcribing system. The system is equipped with an tape drive which can handle 800, 1600, 3200, and 6250 BPI densities. Well known storage devices such as 8mm Exabyte, 4mm DDS-2, and the SCSI CD recorder, are selected for the output devices. These output media should provide more durability, compactness, and portability than the original. Linux is chosen for the operating system. Unfortunately, the Linux, like other Unix systems, is subject to the limit in maximum i/o block size. The maximum block size of the SCSI tape driver is fixed to 32 KB, which is far less than the requirements in SEG-A, B, and C seismic tapes. A kernel patch is written to extend such a limit up to 2048 KB. Input and output programs are written to handle the tape data in variable block mode. A unique disk file format is designed to preserve the IBG(inter-block gap) within the disk copy. A utility program is also provided to manipulate the disk copy and to convert to SU(Seismic Unix) compatible SEG-Y file. Of the total two months of the transcription period, we spend most of the time in reading the sticky magnetic tapes. The seismic tapes had to be `baked` to dry out the moisture before reading. It took nine days to burn the all 85 diskettes. Writing two sets of 8mm Exabytes took only one day. It is considered that 8mm Exabyte can be the optimum output media for the main seismic data storage

  5. Software Defined Radio Datalink Implementation Using PC-Type Computers

    National Research Council Canada - National Science Library

    Zafeiropoulos, Georgios

    2003-01-01

    The objective of this thesis was to examine the feasibility of implementation and the performance of a Software Defined Radio datalink, using a common PC type host computer and a high level programming language...

  6. Software Reviews. PC Software for Artificial Intelligence Applications.

    Science.gov (United States)

    Epp, Helmut; And Others

    1988-01-01

    Contrasts artificial intelligence and conventional programming languages. Reviews Personal Consultant Plus, Smalltalk/V, and Nexpert Object, which are PC-based products inspired by problem-solving paradigms. Provides information on background and operation of each. (RT)

  7. PC data station for Hitachi F-2000 spectrofluorimeter

    International Nuclear Information System (INIS)

    Yakub Ali, Mohd; Dhoble, A.R.; Jadhav, R.T.; Godbole, S.V.

    2004-01-01

    The paper describes the PC based data station for stand-alone HIT ACHI F-2000 Spectrofluorimeter, for data acquisition, storage and analysis. The hardware link between the instrument and PC is made through RS232 serial port. The state of art software for control and data management is designed, developed and implemented in Visual Basic (Version 6). The software features on-screen editing of all operation parameters of the instrument and the operational control is achieved by Visual Basic command words communicated through serial port. Using this system, in addition to acquiring and storage of spectral data, it was possible to obtain the normalized absorption spectra of the samples. PC adapted Hitachi F-2000 Spectrofluorimeter can be successfully used for various operations such as photometric detection of UO22+ ions, recording of emission and excitation spectra and time evolution of fluorescence intensity on continuous UV irradiation. The data storage achieved through PC adaptation has also enabled recording of absorption spectra. (author)

  8. Select PC/windows flat to develop data acquisition system

    International Nuclear Information System (INIS)

    Zhang Jin

    1993-01-01

    Through needing analysis, and also, considering user's ability of payment, the characteristic of China computer market, the computer developing tending, and the system's compatibility and up grade capability, PC/Windows flat are selected to develop a data acquisition system

  9. 2010 ME70 Workshop (PC1003, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The third leg of the 2010 SEAMAP Reeffish Survey, PC 1003, was originally scheduled as an experimental multibeam sonar workshop. However, on July 12, 2010, FSV...

  10. Aspartame-induced apoptosis in PC12 cells

    OpenAIRE

    Horio, Yukari; Sun, Yongkun; Liu, Chuang; Saito, Takeshi; Kurasaki, Masaaki

    2014-01-01

    Aspartame is an artificial sweetner added to many low-calorie foods. The safety of aspartame remains controversial even though there are many studies on its risks. In this study, to understand the physiological effects of trace amounts of artificial sweetners on cells, the effects of aspartame on apoptosis were investigated using a PC12 cell system. In addition, the mechanism of apoptosis induced by aspartame in PC12 cells and effects on apoptotic factors such as cytochrome c, apoptosis-induc...

  11. Efficient Coding of Information: Huffman Coding -RE ...

    Indian Academy of Sciences (India)

    1. Introduction. Shannon's landmark paper 'A Mathematical Theory of. Communication' [1] laid the foundation for communica- ... coding theory, codes over graphs and iterative techniques, and informa- tion theory. .... An important consequence of independence is that if. {Xb X2 , . Xn} are independent random variables, each.

  12. Turbo Codes Extended with Outer BCH Code

    DEFF Research Database (Denmark)

    Andersen, Jakob Dahl

    1996-01-01

    The "error floor" observed in several simulations with the turbo codes is verified by calculation of an upper bound to the bit error rate for the ensemble of all interleavers. Also an easy way to calculate the weight enumerator used in this bound is presented. An extended coding scheme is proposed...

  13. Some features of Pc5 pulsations during a solar cycle

    International Nuclear Information System (INIS)

    Rao, D.R.K.; Gupta, J.C.

    1978-01-01

    The morphological features of Pc5 pulsations during a solar cycle are studied using Fort Churchill data for the years 1962 to 1972. Some of the characteristics noted are as follows: (1) Increasing sunspot numbers show little influence on the diurnal variations of the occurrence, amplitude and the period except perhaps some noticeable change in the absolute magnitude of these parameters during different hours of the day. (2) The morning occurrence peak dominates during all phases of the solar cycle. (3) With increasing magnetic activity the day side region(s) of generation of Pc5 is found to shift closer to the subsolar point and in the midnight sector, the occurrence region seemed to shift towards earlier hours with increasing magnetic activity and towards later hours with increasing sunspot numbers. (4) The amplitude of Pc5 pulsations is directly related to all the levels of magnetic activity. (5) The periods of Pc5 pulsations show strong correlation with increasing sunspot numbers and the amplitude and occurrences are found to vary in accordance with the magnetic activity all through the cycle. (6) The annual and semi-annual variations of Pc5 parameters have been demonstrated especially for the pulsations occurring in the morning close to 8 +- 1 h LT and for those occurring near the midnight hours. (7) a suspected 27-day recurrence tendency has been clearly noticed for the occurrence, amplitude and period of Pc5 pulsations. (author)

  14. CoPc and CoPcF16 on gold: Site-specific charge-transfer processes

    Directory of Open Access Journals (Sweden)

    Fotini Petraki

    2014-04-01

    Full Text Available Interface properties of cobalt(II phthalocyanine (CoPc and cobalt(II hexadecafluoro-phthalocyanine (CoPcF16 to gold are investigated by photo-excited electron spectroscopies (X-ray photoemission spectroscopy (XPS, ultraviolet photoemission spectroscopy (UPS and X-ray excited Auger electron spectroscopy (XAES. It is shown that a bidirectional charge transfer determines the interface energetics for CoPc and CoPcF16 on Au. Combined XPS and XAES measurements allow for the separation of chemical shifts based on different local charges at the considered atom caused by polarization effects. This facilitates a detailed discussion of energetic shifts of core level spectra. The data allow the discussion of site-specific charge-transfer processes.

  15. Application of PC-SAFT to glycol containing systems - PC-SAFT towards a predictive approach

    DEFF Research Database (Denmark)

    Grenner, Andreas; Kontogeorgis, Georgios; von Solms, Nicolas

    2007-01-01

    For equations of state of the SAFT type a major limitation is the procedure of obtaining pure compound parameters using saturated vapor pressure and liquid density data. However, for complex compounds such data are often not available. One solution is to develop a group contribution scheme...... for estimating pure compound parameters from low molecular weight data and extrapolate to complex compounds. For associating compounds this is not trivial since the two parameters for association (association energy and association volume) need to be fixed for a group. In this work, which focuses on glycols, new...... general pure compound parameters were obtained for PC-SAFT which are able to perform well for both vapor-liquid equilibria (VLE) and liquid-liquid equilibria (LLE). Linear trends of non-association parameters were obtained with respect to the molar mass. However, identical values for the association...

  16. Guest Foreword by Lord Phillips KG PC

    Directory of Open Access Journals (Sweden)

    Nicholas A. Phillips

    2012-04-01

    Full Text Available The Rt Hon The Lord Phillips of Worth Matravers KG PC, President of the Supreme Court of the United Kingdom of Great Britain and Northern Ireland Ambition and excellence. Those two words epitomize Qatar. Under the leadership of his Highness the Emir, this small State has set out to make an impact on the world that belies its size. Ambitious was the plan to have an international broadcasting station. Ambitious was the plan to build from scratch a Museum of Islamic Art. Ambitious was the bid – the successful bid to host the World Cup in 2022. Ambitious is the bid to stage the Olympic Games in 2020. Qatar not merely has ambitions, it realizes its ambitions. And when it does so it is not enough to say that the result is ‘world class’, for Qatar sets out to be a world leader in whatever it puts its hand to. Excellence is the norm. Al Jazeera has established itself as the broadcasting station of choice for many throughout the world. The Doha Museum of Islamic Art is recognized as being second to none. In addition, the scale and standard of development in Doha itself is setting new standards of excellence in the fields of architecture and civil engineering. Thus when Qatar focuses its energies on education and the law, high achievements are expected. I shall have the honour of helping to achieve those expectations when I succeed Lord Woolf as President of Qatar’s new and impressive Civil and Commercial Court. The College of Law at Qatar University is already achieving excellence in the field of legal education. So, naturally, all expect great things of this new International Review of Law and I am delighted to have been invited to welcome it by this foreword. The range of the first edition is both international and topical. Those countries that have experienced the turbulence of the Arab Spring are settling new constitutions, and other countries are bent on constitutional reform designed to avoid such turbulence. So an erudite article on

  17. Salinomycin Exerts Anticancer Effects on PC-3 Cells and PC-3-Derived Cancer Stem Cells In Vitro and In Vivo

    Directory of Open Access Journals (Sweden)

    Yunsheng Zhang

    2017-01-01

    Full Text Available Salinomycin is an antibiotic isolated from Streptomyces albus that selectively kills cancer stem cells (CSCs. However, the antitumor mechanism of salinomycin is unclear. This study investigated the chemotherapeutic efficacy of salinomycin in human prostate cancer PC-3 cells. We found that cytotoxicity of salinomycin to PC-3 cells was stronger than to nonmalignant prostate cell RWPE-1, and exposure to salinomycin induced G2/M phage arrest and apoptosis of PC-3 cells. A mechanistic study found salinomycin suppressed Wnt/β-catenin pathway to induce apoptosis of PC-3 cells. An in vivo experiment confirmed that salinomycin suppressed tumorigenesis in a NOD/SCID mice xenograft model generated from implanted PC-3 cells by inhibiting the Wnt/β-catenin pathway, since the total β-catenin protein level was reduced and the downstream target c-Myc level was significantly downregulated. We also showed that salinomycin, but not paclitaxel, triggered more apoptosis in aldehyde dehydrogenase- (ALDH- positive PC-3 cells, which were considered as the prostate cancer stem cells, suggesting that salinomycin may be a promising chemotherapeutic to target CSCs. In conclusion, this study suggests that salinomycin reduces resistance and relapse of prostate tumor by killing cancer cells as well as CSCs.

  18. PC as physics computer for LHC?

    CERN Document Server

    Jarp, S; Simmins, A; Yaari, R; Jarp, Sverre; Tang, Hong; Simmins, Antony; Yaari, Refael

    1995-01-01

    In the last five years, we have seen RISC workstations take over the computing scene that was once controlled by mainframes and supercomputers. In this paper we will argue that the same phenomenon might happen again. A project, active since March this year in the Physics Data Processing group of CERN's CN division is described where ordinary desktop PCs running Windows (NT and 3.11) have been used for creating an environment for running large LHC batch jobs (initially the DICE simulation job of Atlas). The problems encountered in porting both the CERN library and the specific Atlas codes are described together with some encouraging benchmark results when comparing to existing RISC workstations in use by the Atlas collaboration. The issues of establishing the batch environment (Batch monitor, staging software, etc.) are also covered. Finally a quick extrapolation of commodity computing power available in the future is touched upon to indicate what kind of cost envelope could be sufficient for the simulation fa...

  19. PC as physics computer for LHC?

    International Nuclear Information System (INIS)

    Jarp, Sverre; Simmins, Antony; Tang, Hong

    1996-01-01

    In the last five years, we have seen RISC workstations take over the computing scene that was once controlled by mainframes and supercomputers. In this paper we will argue that the same phenomenon might happen again. A project, active since March this year in the Physics Data Processing group of CERN's CN division is described where ordinary desktop PCs running Windows (NT and 3.11) have been used for creating an environment for running large LHC batch jobs (initially the DICE simulation job of Atlas). The problems encountered in porting both the CERN library and the specific Atlas codes are described together with some encouraging benchmark results when comparing to existing to existing RISC workstation in use by the Atlas collaboration. The issues of establishing the batch environment (Batch monitor, staging software, etc) are also covered. Finally a quick extrapolation of commodity computing power available in the future is touched upon to indicate what kind of cost envelope could be sufficient for the simulation farms required by the LHC experiments. (author)

  20. SEVERO code - user's manual

    International Nuclear Information System (INIS)

    Sacramento, A.M. do.

    1989-01-01

    This user's manual contains all the necessary information concerning the use of SEVERO code. This computer code is related to the statistics of extremes = extreme winds, extreme precipitation and flooding hazard risk analysis. (A.C.A.S.)

  1. Model and code development

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Progress in model and code development for reactor physics calculations is summarized. The codes included CINDER-10, PHROG, RAFFLE GAPP, DCFMR, RELAP/4, PARET, and KENO. Kinetics models for the PBF were developed

  2. Coding for optical channels

    CERN Document Server

    Djordjevic, Ivan; Vasic, Bane

    2010-01-01

    This unique book provides a coherent and comprehensive introduction to the fundamentals of optical communications, signal processing and coding for optical channels. It is the first to integrate the fundamentals of coding theory and optical communication.

  3. Autophagy Regulates Colistin-Induced Apoptosis in PC-12 Cells

    Science.gov (United States)

    Zhang, Ling; Zhao, Yonghao; Ding, Wenjian; Jiang, Guozheng; Lu, Ziyin; Li, Li; Wang, Jinli

    2015-01-01

    Colistin is a cyclic cationic polypeptide antibiotic with activity against multidrug-resistant Gram-negative bacteria. Our recent study demonstrated that colistin induces apoptosis in primary chick cortex neurons and PC-12 cells. Although apoptosis and autophagy have different impacts on cell fate, there is a complex interaction between them. Autophagy plays an important role as a homeostasis regulator by removing excessive or unnecessary proteins and damaged organelles. The aim of the present study was to investigate the modulation of autophagy and apoptosis regulation in PC-12 cells in response to colistin treatment. PC-12 cells were exposed to colistin (125 to 250 μg/ml), and autophagy was detected by visualization of monodansylcadaverine (MDC)-labeled vacuoles, LC3 (microtubule-associated protein 1 light chain 3) immunofluorescence microscopic examination, and Western blotting. Apoptosis was measured by flow cytometry, Hoechst 33258 staining, and Western blotting. Autophagosomes were observed after treatment with colistin for 12 h, and the levels of LC3-II gene expression were determined; observation and protein levels both indicated that colistin induced a high level of autophagy. Colistin treatment also led to apoptosis in PC-12 cells, and the level of caspase-3 expression increased over the 24-h period. Pretreatment of cells with 3-methyladenine (3-MA) increased colistin toxicity in PC-12 cells remarkably. However, rapamycin treatment significantly increased the expression levels of LC3-II and beclin 1 and decreased the rate of apoptosis of PC-12 cells. Our results demonstrate that colistin induced autophagy and apoptosis in PC-12 cells and that the latter was affected by the regulation of autophagy. It is very likely that autophagy plays a protective role in the reduction of colistin-induced cytotoxicity in neurons. PMID:25645826

  4. Development of the integrated system reliability analysis code MODULE

    International Nuclear Information System (INIS)

    Han, S.H.; Yoo, K.J.; Kim, T.W.

    1987-01-01

    The major components in a system reliability analysis are the determination of cut sets, importance measure, and uncertainty analysis. Various computer codes have been used for these purposes. For example, SETS and FTAP are used to determine cut sets; Importance for importance calculations; and Sample, CONINT, and MOCUP for uncertainty analysis. There have been problems when the codes run each other and the input and output are not linked, which could result in errors when preparing input for each code. The code MODULE was developed to carry out the above calculations simultaneously without linking input and outputs to other codes. MODULE can also prepare input for SETS for the case of a large fault tree that cannot be handled by MODULE. The flow diagram of the MODULE code is shown. To verify the MODULE code, two examples are selected and the results and computation times are compared with those of SETS, FTAP, CONINT, and MOCUP on both Cyber 170-875 and IBM PC/AT. Two examples are fault trees of the auxiliary feedwater system (AFWS) of Korea Nuclear Units (KNU)-1 and -2, which have 54 gates and 115 events, 39 gates and 92 events, respectively. The MODULE code has the advantage that it can calculate the cut sets, importances, and uncertainties in a single run with little increase in computing time over other codes and that it can be used in personal computers

  5. The FOCON96 1.0 computer code

    International Nuclear Information System (INIS)

    Merle-Szeremeta, A.; Thomassin, A.

    1999-01-01

    The Institute of Protection and Nuclear Safety (I.P.S.N.) has developed a computer code, FOCON96 1.0 to calculate the dosimetric consequences of atmospheric radioactive releases from nuclear installations after several years of usual operation. This communication describes the principal characteristics of FOCON96 1.0 and its functionalities. The principal elements of a comparison between FOCON96 1.0 and PC-CREAM ( European computer code developed by the N.R.P.B. and answering the same criteria) are given here. (N.C.)

  6. On the Delay Characteristics for Point-to-Point links using Random Linear Network Coding with On-the-fly Coding Capabilities

    DEFF Research Database (Denmark)

    Tömösközi, Máté; Fitzek, Frank; Roetter, Daniel Enrique Lucani

    2014-01-01

    . This metric captures the elapsed time between (network) encoding RTP packets and completely decoding the packets in-order on the receiver side. Our solutions are implemented and evaluated on a point-to-point link between a Raspberry Pi device and a network (de)coding enabled software running on a regular PC...

  7. Enhancing QR Code Security

    OpenAIRE

    Zhang, Linfan; Zheng, Shuang

    2015-01-01

    Quick Response code opens possibility to convey data in a unique way yet insufficient prevention and protection might lead into QR code being exploited on behalf of attackers. This thesis starts by presenting a general introduction of background and stating two problems regarding QR code security, which followed by a comprehensive research on both QR code itself and related issues. From the research a solution taking advantages of cloud and cryptography together with an implementation come af...

  8. Stylize Aesthetic QR Code

    OpenAIRE

    Xu, Mingliang; Su, Hao; Li, Yafei; Li, Xi; Liao, Jing; Niu, Jianwei; Lv, Pei; Zhou, Bing

    2018-01-01

    With the continued proliferation of smart mobile devices, Quick Response (QR) code has become one of the most-used types of two-dimensional code in the world. Aiming at beautifying the appearance of QR codes, existing works have developed a series of techniques to make the QR code more visual-pleasant. However, these works still leave much to be desired, such as visual diversity, aesthetic quality, flexibility, universal property, and robustness. To address these issues, in this paper, we pro...

  9. ARC Code TI: CODE Software Framework

    Data.gov (United States)

    National Aeronautics and Space Administration — CODE is a software framework for control and observation in distributed environments. The basic functionality of the framework allows a user to observe a distributed...

  10. ARC Code TI: ROC Curve Code Augmentation

    Data.gov (United States)

    National Aeronautics and Space Administration — ROC (Receiver Operating Characteristic) curve Code Augmentation was written by Rodney Martin and John Stutz at NASA Ames Research Center and is a modification of ROC...

  11. Refactoring test code

    NARCIS (Netherlands)

    A. van Deursen (Arie); L.M.F. Moonen (Leon); A. van den Bergh; G. Kok

    2001-01-01

    textabstractTwo key aspects of extreme programming (XP) are unit testing and merciless refactoring. Given the fact that the ideal test code / production code ratio approaches 1:1, it is not surprising that unit tests are being refactored. We found that refactoring test code is different from

  12. Error Correcting Codes -34 ...

    Indian Academy of Sciences (India)

    the reading of data from memory the receiving process. Protecting data in computer memories was one of the earliest applications of Hamming codes. We now describe the clever scheme invented by Hamming in 1948. To keep things simple, we describe the binary length 7 Hamming code. Encoding in the Hamming Code.

  13. Morse Code Activity Packet.

    Science.gov (United States)

    Clinton, Janeen S.

    This activity packet offers simple directions for setting up a Morse Code system appropriate to interfacing with any of several personal computer systems. Worksheets are also included to facilitate teaching Morse Code to persons with visual or other disabilities including blindness, as it is argued that the code is best learned auditorily. (PB)

  14. Monte Carlo Simulation for Neptun 10 PC medical linear accelerator and calculations of electron beam parameters

    International Nuclear Information System (INIS)

    Bahreyni Toossi, M.T.; Hashemi, S.M.; Momen Nezhad, M.

    2008-01-01

    In recent decades, cancer has been one of the main ever increasing causes of death in developed countries. In order to fulfill the aforementioned considerations different techniques have been used, one of which is Monte Carlo simulation technique. High accuracy of the Monte Carlo simulation has been one of the main reason for its wide spread application. In this study, MCNP-4C code was employed to simulate electron mode of the Neptun 10 PC Linac, dosimetric quantities for conventional fields have also been both measured and calculated. Although Neptun 10 PC Linac is no longer licensed for installation in European and some other countries but regrettably nearly 10 of them have been installed in different centers around the country and are in operation. Therefore, in this circumstance, to improve the accuracy of treatment planning, Monte Carlo simulation for Neptun 10 PC was recognized as a necessity. Simulated and measured values of depth dose curves, off axis dose distributions for 6 , 8 and 10 MeV electrons applied for four different size fields, 6 x 6 cm 2 , 10 x 10 cm 2 , 15 x 15 cm 2 and 20 x 20 cm 2 were obtained. The measurements were carried out by a Welhofer-Scanditronix dose scanning system, Semiconductor Detector and Ionization Chamber. The results of this study have revealed that the values of two main dosimetric quantities depth dose curves and off axis dose distributions, acquired by MCNP-4C simulation and the corresponding values achieved by direct measurements are in a very good agreement (within 1% to 2% difference). In general, very good consistency of simulated and measured results, is a good proof that the goal of this work has been accomplished. In other word where measurements of some parameters are not practically achievable, MCNP-4C simulation can be implemented confidently. (author)

  15. Software Certification - Coding, Code, and Coders

    Science.gov (United States)

    Havelund, Klaus; Holzmann, Gerard J.

    2011-01-01

    We describe a certification approach for software development that has been adopted at our organization. JPL develops robotic spacecraft for the exploration of the solar system. The flight software that controls these spacecraft is considered to be mission critical. We argue that the goal of a software certification process cannot be the development of "perfect" software, i.e., software that can be formally proven to be correct under all imaginable and unimaginable circumstances. More realistically, the goal is to guarantee a software development process that is conducted by knowledgeable engineers, who follow generally accepted procedures to control known risks, while meeting agreed upon standards of workmanship. We target three specific issues that must be addressed in such a certification procedure: the coding process, the code that is developed, and the skills of the coders. The coding process is driven by standards (e.g., a coding standard) and tools. The code is mechanically checked against the standard with the help of state-of-the-art static source code analyzers. The coders, finally, are certified in on-site training courses that include formal exams.

  16. Empirically modelled Pc3 activity based on solar wind parameters

    Directory of Open Access Journals (Sweden)

    B. Heilig

    2010-09-01

    Full Text Available It is known that under certain solar wind (SW/interplanetary magnetic field (IMF conditions (e.g. high SW speed, low cone angle the occurrence of ground-level Pc3–4 pulsations is more likely. In this paper we demonstrate that in the event of anomalously low SW particle density, Pc3 activity is extremely low regardless of otherwise favourable SW speed and cone angle. We re-investigate the SW control of Pc3 pulsation activity through a statistical analysis and two empirical models with emphasis on the influence of SW density on Pc3 activity. We utilise SW and IMF measurements from the OMNI project and ground-based magnetometer measurements from the MM100 array to relate SW and IMF measurements to the occurrence of Pc3 activity. Multiple linear regression and artificial neural network models are used in iterative processes in order to identify sets of SW-based input parameters, which optimally reproduce a set of Pc3 activity data. The inclusion of SW density in the parameter set significantly improves the models. Not only the density itself, but other density related parameters, such as the dynamic pressure of the SW, or the standoff distance of the magnetopause work equally well in the model. The disappearance of Pc3s during low-density events can have at least four reasons according to the existing upstream wave theory: 1. Pausing the ion-cyclotron resonance that generates the upstream ultra low frequency waves in the absence of protons, 2. Weakening of the bow shock that implies less efficient reflection, 3. The SW becomes sub-Alfvénic and hence it is not able to sweep back the waves propagating upstream with the Alfvén-speed, and 4. The increase of the standoff distance of the magnetopause (and of the bow shock. Although the models cannot account for the lack of Pc3s during intervals when the SW density is extremely low, the resulting sets of optimal model inputs support the generation of mid latitude Pc3 activity predominantly through

  17. NASA Lewis Steady-State Heat Pipe Code Architecture

    Science.gov (United States)

    Mi, Ye; Tower, Leonard K.

    2013-01-01

    NASA Glenn Research Center (GRC) has developed the LERCHP code. The PC-based LERCHP code can be used to predict the steady-state performance of heat pipes, including the determination of operating temperature and operating limits which might be encountered under specified conditions. The code contains a vapor flow algorithm which incorporates vapor compressibility and axially varying heat input. For the liquid flow in the wick, Darcy s formula is employed. Thermal boundary conditions and geometric structures can be defined through an interactive input interface. A variety of fluid and material options as well as user defined options can be chosen for the working fluid, wick, and pipe materials. This report documents the current effort at GRC to update the LERCHP code for operating in a Microsoft Windows (Microsoft Corporation) environment. A detailed analysis of the model is presented. The programming architecture for the numerical calculations is explained and flowcharts of the key subroutines are given

  18. Magnesium phthalocyanine(MgPc) thin films as nanomaterials

    Science.gov (United States)

    Puri, Munish; Bedi, R. K.; Prakash, G. V.

    2006-05-01

    MgPc is a promising candidate for photovoltaic applications. It can be easily synthesized and is non-toxic to the envioronment. It is a self assembly molecule developed from deep-blue-green pigment. It exhibits a characteristic structural self organization which is reflected in an efficient energy migration in the form of extinction transport. MgPc relates to the similarity with chlorophyll. In the present work thin films of MgPc have been prepared on glass substrate under strict vacuum conditions(10 Â6 torr), thickness of few nanometers. Absorption spectra in Visible and IR regions have been observed which is good for fabrication of Photovoltaic cells and Nanostructures for Photodynamic Cancer Therapy. Appreciable amount of cytotoxicity can be observed while using MgPc as photosensitizers which is a promising PDT agent. The films thus prepared have been studied for their electrical and optical characterizations. Investigations have been made from different stacking positions of molecular MgPc thin films for studying their self-assembling nature that can be useful for their applications as Molecular-Recognition in Drug delivery and sensors which is one of the key features of Nanotechnology.

  19. Abnormal expression and processing of the proprotein convertases PC1 and PC2 in human colorectal liver metastases

    Directory of Open Access Journals (Sweden)

    Marcus Victoria

    2005-11-01

    Full Text Available Abstract Background The family of proprotein convertases has been recently implicated in tumorigenesis and metastasis in animal models. However, these studies have not yet been completely corroborated in human tumors. Methods Using RT PCR, immunoblot and immunohistochemistry we assessed the presence and the processing patterns of the convertases PC1 and PC2 as well as the PC2 specific chaperone 7B2 in human liver metastases originating from colorectal cancer and compared them to unaffected and normal liver. Furthermore, we assessed the presence and processing profiles of PC1, PC2 and 7B2 in primary colon cancers. Results mRNA, protein expression, and protein cleavage profiles of proprotein convertases 1 and 2 are altered in liver colorectal metastasis, compared to unaffected and normal liver. Active PC1 protein is overexpressed in tumor, correlating with its mRNA profile. Moreover, the enhanced PC2 processing pattern in tumor correlates with the overexpression of its specific binding protein 7B2. These results were corroborated by immunohistochemistry. The specific and uniform convertase pattern observed in the metastases was present only in a fraction of primary colon cancers. Conclusion The uniformly altered proprotein convertase profile in liver metastases is observed only in a fraction of primary colon cancers, suggesting possible selection processes involving PCs during metastasis as well as an active role of PCs in liver metastasis. In addition, the exclusive presence of 7B2 in metastatic tumors may represent a new target for early diagnosis, prognosis and/or treatment.

  20. The network code

    International Nuclear Information System (INIS)

    1997-01-01

    The Network Code defines the rights and responsibilities of all users of the natural gas transportation system in the liberalised gas industry in the United Kingdom. This report describes the operation of the Code, what it means, how it works and its implications for the various participants in the industry. The topics covered are: development of the competitive gas market in the UK; key points in the Code; gas transportation charging; impact of the Code on producers upstream; impact on shippers; gas storage; supply point administration; impact of the Code on end users; the future. (20 tables; 33 figures) (UK)

  1. The materiality of Code

    DEFF Research Database (Denmark)

    Soon, Winnie

    2014-01-01

    , Twitter and Facebook). The focus is not to investigate the functionalities and efficiencies of the code, but to study and interpret the program level of code in order to trace the use of various technological methods such as third-party libraries and platforms’ interfaces. These are important...... to understand the socio-technical side of a changing network environment. Through the study of code, including but not limited to source code, technical specifications and other materials in relation to the artwork production, I would like to explore the materiality of code that goes beyond technical...

  2. Coding for Electronic Mail

    Science.gov (United States)

    Rice, R. F.; Lee, J. J.

    1986-01-01

    Scheme for coding facsimile messages promises to reduce data transmission requirements to one-tenth current level. Coding scheme paves way for true electronic mail in which handwritten, typed, or printed messages or diagrams sent virtually instantaneously - between buildings or between continents. Scheme, called Universal System for Efficient Electronic Mail (USEEM), uses unsupervised character recognition and adaptive noiseless coding of text. Image quality of resulting delivered messages improved over messages transmitted by conventional coding. Coding scheme compatible with direct-entry electronic mail as well as facsimile reproduction. Text transmitted in this scheme automatically translated to word-processor form.

  3. Status of the Linux PC cluster for between-pulse data analyses at DIII-D

    International Nuclear Information System (INIS)

    Peng, Q.; Groebner, R.J.; Lao, L.L.; Schachter, J.; Schissel, D.P.; Wade, M.R.

    2002-01-01

    Some analyses that survey experimental data are carried out at a sparse sample rate between pulses during tokamak operation and/or completed as a batch job overnight because the complete analysis on a single fast workstation cannot fit in the narrow time window between two pulses. Scientists therefore miss the opportunity to use these results to guide experiments quickly. With a dedicated Beowulf type cluster at a cost less than that of a workstation, these analyses can be accomplished between pulses and the analyzed data made available for the research team during the tokamak operation. A Linux PC cluster comprised of 12 processors was installed at DIII-D National Fusion Facility in CY00 and expanded to 24 processors in CY01 to automatically perform between-pulse magnetic equilibrium reconstructions using the EFIT code written in FORTRAN, CER analyses using CERQUICK code written in interactive data language (IDL) and full profile fitting analyses (n e , T e , T i , V r , Z eff ) using IDL code ZIPFIT. This paper reports the current status of the system, the details of the between-pulse profile fitting analyses, and discusses some problems and concerns raised during the implementation and expansion of the system

  4. STATUS OF THE LINUX PC CLUSTER FOR BETWEEN-PULSE DATA ANALYSES AT DIII-D

    International Nuclear Information System (INIS)

    PENG, Q; GROEBNER, R.J; LAO, L.L; SCHACHTER, J.; SCHISSEL, D.P; WADE, M.R.

    2001-08-01

    OAK-B135 Some analyses that survey experimental data are carried out at a sparse sample rate between pulses during tokamak operation and/or completed as a batch job overnight because the complete analysis on a single fast workstation cannot fit in the narrow time window between two pulses. Scientists therefore miss the opportunity to use these results to guide experiments quickly. With a dedicated Beowulf type cluster at a cost less than that of a workstation, these analyses can be accomplished between pulses and the analyzed data made available for the research team during the tokamak operation. A Linux PC cluster comprises of 12 processors was installed at DIII-D National Fusion Facility in CY00 and expanded to 24 processors in CY01 to automatically perform between-pulse magnetic equilibrium reconstructions using the EFIT code written in Fortran, CER analyses using CERQUICK code written in IDL and full profile fitting analyses (n e , T e , T i , V r , Z eff ) using IDL code ZIPFIT. This paper reports the current status of the system and discusses some problems and concerns raised during the implementation and expansion of the system

  5. A PC [personal computer]-based version of KENO V.a

    International Nuclear Information System (INIS)

    Nigg, D.A.; Atkinson, C.A.; Briggs, J.B.; Taylor, J.T.

    1990-01-01

    The use of personal computers (PCs) and engineering workstations for complex scientific computations has expanded rapidly in the last few years. This trend is expected to continue in the future with the introduction of increasingly sophisticated microprocessors and microcomputer systems. For a number of reasons, including security, economy, user convenience, and productivity, an integrated system of neutronics and radiation transport software suitable for operation in an IBM PC-class environment has been under development at the Idaho National Engineering Laboratory (INEL) for the past 3 yr. Nuclear cross-section data and resonance parameters are preprocessed from the Evaluated Nuclear Data Files Version 5 (ENDF/B-V) and supplied in a form suitable for use in a PC-based spectrum calculation and multigroup cross-section generation module. This module produces application-specific data libraries that can then be used in various neutron transport and diffusion theory code modules. This paper discusses several details of the Monte Carlo criticality module, which is based on the well-known highly-sophisticated KENO V.a package developed at Oak Ridge National Laboratory and previously released in mainframe form by the Radiation Shielding Information Center (RSIC). The conversion process and a variety of benchmarking results are described

  6. XSOR codes users manual

    International Nuclear Information System (INIS)

    Jow, Hong-Nian; Murfin, W.B.; Johnson, J.D.

    1993-11-01

    This report describes the source term estimation codes, XSORs. The codes are written for three pressurized water reactors (Surry, Sequoyah, and Zion) and two boiling water reactors (Peach Bottom and Grand Gulf). The ensemble of codes has been named ''XSOR''. The purpose of XSOR codes is to estimate the source terms which would be released to the atmosphere in severe accidents. A source term includes the release fractions of several radionuclide groups, the timing and duration of releases, the rates of energy release, and the elevation of releases. The codes have been developed by Sandia National Laboratories for the US Nuclear Regulatory Commission (NRC) in support of the NUREG-1150 program. The XSOR codes are fast running parametric codes and are used as surrogates for detailed mechanistic codes. The XSOR codes also provide the capability to explore the phenomena and their uncertainty which are not currently modeled by the mechanistic codes. The uncertainty distributions of input parameters may be used by an. XSOR code to estimate the uncertainty of source terms

  7. DLLExternalCode

    Energy Technology Data Exchange (ETDEWEB)

    2014-05-14

    DLLExternalCode is the a general dynamic-link library (DLL) interface for linking GoldSim (www.goldsim.com) with external codes. The overall concept is to use GoldSim as top level modeling software with interfaces to external codes for specific calculations. The DLLExternalCode DLL that performs the linking function is designed to take a list of code inputs from GoldSim, create an input file for the external application, run the external code, and return a list of outputs, read from files created by the external application, back to GoldSim. Instructions for creating the input file, running the external code, and reading the output are contained in an instructions file that is read and interpreted by the DLL.

  8. Code for calculation of spreading of radioactivity in reactor containment systems

    International Nuclear Information System (INIS)

    Vertes, P.

    1992-09-01

    A detailed description of the new version of TIBSO code is given, with applications for accident analysis in a reactor containment system. The TIBSO code can follow the nuclear transition and the spatial migration of radioactive materials. The modelling of such processes is established in a very flexible way enabling the user to investigate a wide range of problems. The TIBSO code system is described in detail, taking into account the new developments since 1983. Most changes improve the capabilities of the code. The new version of TIBSO system is written in FORTRAN-77 and can be operated both under VAX VMS and PC DOS. (author) 5 refs.; 3 figs.; 21 tabs

  9. ENDF utility codes release 6.10. Description and operating instructions

    International Nuclear Information System (INIS)

    Dunford, C.L.

    1995-01-01

    Description and operating instructions are given for a package of utility codes operating on evaluated nuclear data files in the formats ENDF-6 (and ENDF-5). Included are the data checking codes CHECKER, FIZCON, PSYCHE; the code INTER for retrieving thermal cross-sections and some other data; graphical plotting subroutines PLOTEF, GRALIB, INTLIB; and the file maintenance and retrieval codes LISTEF, SETMDC, GETMAT, STANEF. This program package which is designed for CDC, IBM, DEC and PC computers, can be obtained on magnetic tape or floppy diskette, free of charge, from the IAEA Nuclear Data Section. (author)

  10. Demonstration of a PC 25 Fuel Cell in Russia

    Energy Technology Data Exchange (ETDEWEB)

    John C. Trocciola; Thomas N. Pompa; Linda S. Boyd

    2004-09-01

    This project involved the installation of a 200kW PC25C{trademark} phosphoric-acid fuel cell power plant at Orgenergogaz, a Gazprom industrial site in Russia. In April 1997, a PC25C{trademark} was sold by ONSI Corporation to Orgenergogaz, a subsidiary of the Russian company ''Gazprom''. Due to instabilities in the Russian financial markets, at that time, the unit was never installed and started by Orgenergogaz. In October of 2001 International Fuel Cells (IFC), now known as UTC Fuel Cells (UTCFC), received a financial assistance award from the United States Department of Energy (DOE) entitled ''Demonstration of PC 25 Fuel Cell in Russia''. Three major tasks were part of this award: the inspection of the proposed site and system, start-up assistance, and installation and operation of the powerplant.

  11. Aspartame-induced apoptosis in PC12 cells.

    Science.gov (United States)

    Horio, Yukari; Sun, Yongkun; Liu, Chuang; Saito, Takeshi; Kurasaki, Masaaki

    2014-01-01

    Aspartame is an artificial sweetner added to many low-calorie foods. The safety of aspartame remains controversial even though there are many studies on its risks. In this study, to understand the physiological effects of trace amounts of artificial sweetners on cells, the effects of aspartame on apoptosis were investigated using a PC12 cell system. In addition, the mechanism of apoptosis induced by aspartame in PC12 cells and effects on apoptotic factors such as cytochrome c, apoptosis-inducing factor, and caspase family proteins were studied by Western blotting and RT-PCR. Aspartame-induced apoptosis in PC12 cells in a dose-dependent manner. In addition, aspartame exposure increased the expressions of caspases 8 and 9, and cytochrome c. These results indicate that aspartame induces apoptosis mainly via mitochondrial pathway involved in apoptosis due to oxigen toxicity. Copyright © 2013 Elsevier B.V. All rights reserved.

  12. A PC-based computer program for simulation of containment pressurization

    International Nuclear Information System (INIS)

    Seifaee, F.

    1990-01-01

    This paper reports that a PC-based computer program has been developed to simulate a pressurized water reactor (PWR) containment during various transients. This containment model is capable of determining pressure and temperature history of a PWR containment in the event of a loss of coolant accident, as well as main steam line breaks inside the containment. Conservation of mass and energy equations are applied to the containment model. Development of the program is based on minimization of input specified information and user friendliness. Maximization of calculation efficiency is obtained by superseding the traditional trial and error procedure for determination of the state variables and implementation of an explicit solution for pressure. The program includes simplified models for active heat removal systems. The results are in close agreement between the present model and CONTEMPT-MOD5 computer code for pressure and temperature inside the containment

  13. Angular distributions of protons from the c13(d, p)c14 and c12(d, p)c13 reactions

    NARCIS (Netherlands)

    Koudijs, B.; Endt, P.M.; Hart, J.M. van der; Palmen, P.J.W.

    Angular distributions have been measured of protons from the groundstate transitions of the reactions C13(d, p)C14 and C12(d, p)C13 at a deuteron bombarding energy of 470 keV. The target consisted of barium carbonate enriched to 56% in C13 content. The angular distribution of C13(d, p)C14 protons

  14. METHANE de-NOX for Utility PC Boilers

    Energy Technology Data Exchange (ETDEWEB)

    Bruce Bryan; Joseph Rabovitser; Serguei Nester; Stan Wohadlo

    2005-06-30

    Large-scale combustion tests with caking bituminous coal has stopped. This stoppage has come about due to limitations in current funding available to continue large scale research and development activities at Riley's Commercial Burner Test Facility (CBTF) of the PC Preheat technology. The CBTF was secured and decommissioned in the previous quarter; work this quarter has focused on disposition of PC Preheat experimental equipment at the CBTF as well as methods for disposal of about 100 tons of residual PRB test coal in storage. GTI was granted a no-cost time extension through September 2005; a final report is due in December 2005.

  15. Data Communication PC/NaI-borehole probe (Hardware & Software)

    DEFF Research Database (Denmark)

    Madsen, Peter Buch

    Development of new hard- & software to a NaI borehole probe on a PC. Save data from the probe each 10'th sec, handle the data from the probe and make calculations every 10'th sec and show the results on the monitor.......Development of new hard- & software to a NaI borehole probe on a PC. Save data from the probe each 10'th sec, handle the data from the probe and make calculations every 10'th sec and show the results on the monitor....

  16. PC Based Linear Variable Differential Displacement Measurement Uses Optical Technique

    Directory of Open Access Journals (Sweden)

    Tapan Kumar MAITI

    2007-07-01

    Full Text Available PC based linear variable differential displacement (LVDD measurement with optical approach has been presented. The technique is a good blending of both hardware and software and is basically an alternative method of linear variable differential transformer (LVDT. A visual basic (VB programming is used for this PC based measurement. Here the voltage output and the displacement of the reflector can be studied and stored continuously. Theoretical predictions are supported by experimental results. This technique can be used for the measurement of some non-electrical parameters e.g. force, torque and liquid level etc.

  17. CC-3 CAMAC crate controller for IBM PC

    International Nuclear Information System (INIS)

    Khare, A.N.; Ghodgaonkar, M.D.; Bairi, B.R.

    1991-01-01

    The specifications and implementation details of CAMAC Crate Controller CC-3 for IBM-PC compatible as a host computer, having capability to transfer high speed data with direct memory access (DMA) scheme and logic to execute CAMAC cycles directly from the crate controller, to implement the block algorithms specified in ANSI/IEEE Std. 683-1976 (Reaff-1981) are described. The maximum data transfer rate measured with 8 bit interface of PC-AT is 240K byte per second. This work is carried out under Seventh Five Year Plan Project on Modernisation of reactor Control Instrumentation and Development of CAMAC and Fastbus Instrumentation. (author). 9 refs., 5 figs., 4 appendixes

  18. Platform Comparison Between Games Console, Mobile Games And PC Games

    OpenAIRE

    Geraldus Galehantomo P.S

    2015-01-01

    In terms of platforms and game console, there are diffrences between, mobile games and pc gamesin the way it is used, the operator, the main event play, the game design and even the way the game work.We know that all the games on console platforms, PC and mobile, have their own characteristic which have advantages and drawbacks All platforms compete to win the rating for the sake of their platform continuity. For rating, all games platforms develop games that are more qualified. Those gam...

  19. Platform Comparison Between Games Console, Mobile Games And PC Games

    Directory of Open Access Journals (Sweden)

    Geraldus Galehantomo P.S

    2015-11-01

    Full Text Available In terms of platforms and game console, there are diffrences between, mobile games and pc gamesin the way it is used, the operator, the main event play, the game design and even the way the game work.We know that all the games on console platforms, PC and mobile, have their own characteristic which have advantages and drawbacks All platforms compete to win the rating for the sake of their platform continuity. For rating, all games platforms develop games that are more qualified. Those games will determine the quality of the platforms, so that the game developers of each platform developtheir games maximally to compete.

  20. Run-08 pC polarization analysis - October 16, 2008

    Energy Technology Data Exchange (ETDEWEB)

    Dharmawardane,V.; Bazilevsky,A.; Bunce, G.; Gill, R.; Huang, H.; Makdisi, Y.; Nakagawa, I.; Morozov, B.; Okada, H.; Sivertz, M.; Zelenski, A.; Alekseev, I.; Svirida, D.

    2009-03-01

    In this note we will discuss the analysis of RHIC run 08 pC data that were collected during February 14 - March 10, 2008. An analysis method that is similar to Run 05 and Run 06 was adopted for Run 08 analysis (except few minor changes, which are described below). A detailed analysis note and a NIM article that describe the pC analysis procedure (for run 05 and run 06) can be found elsewhere. In brief, the analysis consists of calibrating the detectors, determining energy corrections ('dead layers'), determining good runs and extracting the polarization from data.

  1. Computer codes for level 1 probabilistic safety assessment

    International Nuclear Information System (INIS)

    1990-06-01

    Probabilistic Safety Assessment (PSA) entails several laborious tasks suitable for computer codes assistance. This guide identifies these tasks, presents guidelines for selecting and utilizing computer codes in the conduct of the PSA tasks and for the use of PSA results in safety management and provides information on available codes suggested or applied in performing PSA in nuclear power plants. The guidance is intended for use by nuclear power plant system engineers, safety and operating personnel, and regulators. Large efforts are made today to provide PC-based software systems and PSA processed information in a way to enable their use as a safety management tool by the nuclear power plant overall management. Guidelines on the characteristics of software needed for management to prepare a software that meets their specific needs are also provided. Most of these computer codes are also applicable for PSA of other industrial facilities. The scope of this document is limited to computer codes used for the treatment of internal events. It does not address other codes available mainly for the analysis of external events (e.g. seismic analysis) flood and fire analysis. Codes discussed in the document are those used for probabilistic rather than for phenomenological modelling. It should be also appreciated that these guidelines are not intended to lead the user to selection of one specific code. They provide simply criteria for the selection. Refs and tabs

  2. Simple morphological control of ZnPc thin films grown on subpc underlayer

    International Nuclear Information System (INIS)

    Park, Da Som; Yim, Sang Gyu

    2015-01-01

    Morphological templating in molecular double-layer thin films, i.e., the phenomenon where the surface morphology of the top layer is strongly influenced by that of the underlying layer, was investigated to control the surface nanomorphology of zinc phthalocyanine (ZnPc) thin films. Three types of molecular thin films, ZnPc single-layer, chloro[subphthalocyaninato]boron(III) (SubPc) single-layer, and ZnPc on SubPc (SubPc/ZnPc) double-layer thin films were grown on glass substrates and post-annealed at 250 °C. While the changes in surface roughness and morphology of the ZnPc single layer were negligible during post-annealing, the roughness of the SubPc/ZnPc double layer significantly increased, similar to that of the SubPc single-layer film. However, the lateral size of the surface crystallites of the SubPc/ZnPc film did not change apparently. Consequently, the fabricated regular, nanopillar-like surface morphology obtained by this simple treatment is expected to provide desirable interdigitated donor–acceptor interface with large contact area for small-molecule organic photovoltaic device applications. In addition, the ZnPc and SubPc single-layer thin films showed absorption maxima in different spectral regions; hence, the double-layer film absorbed the incident light effectively in a broader spectral range

  3. Quality assessment of platelet concentrates prepared by platelet rich plasma-platelet concentrate, buffy coat poor-platelet concentrate (BC-PC and apheresis-PC methods

    Directory of Open Access Journals (Sweden)

    Singh Ravindra

    2009-01-01

    Full Text Available Background: Platelet rich plasma-platelet concentrate (PRP-PC, buffy coat poor-platelet concentrate (BC-PC, and apheresis-PC were prepared and their quality parameters were assessed. Study Design: In this study, the following platelet products were prepared: from random donor platelets (i platelet rich plasma - platelet concentrate (PRP-PC, and (ii buffy coat poor- platelet concentrate (BC-PC and (iii single donor platelets (apheresis-PC by different methods. Their quality was assessed using the following parameters: swirling, volume of the platelet concentrate, platelet count, WBC count and pH. Results: A total of 146 platelet concentrates (64 of PRP-PC, 62 of BC-PC and 20 of apheresis-PC were enrolled in this study. The mean volume of PRP-PC, BC-PC and apheresis-PC was 62.30±22.68 ml, 68.81±22.95 ml and 214.05±9.91 ml and ranged from 22-135 ml, 32-133 ml and 200-251 ml respectively. The mean platelet count of PRP-PC, BC-PC and apheresis-PC was 7.6±2.97 x 1010/unit, 7.3±2.98 x 1010/unit and 4.13±1.32 x 1011/unit and ranged from 3.2-16.2 x 1010/unit, 0.6-16.4 x 1010/unit and 1.22-8.9 x 1011/unit respectively. The mean WBC count in PRP-PC (n = 10, BC-PC (n = 10 and apheresis-PC (n = 6 units was 4.05±0.48 x 107/unit, 2.08±0.39 x 107/unit and 4.8±0.8 x 106/unit and ranged from 3.4 -4.77 x 107/unit, 1.6-2.7 x 107/unit and 3.2 - 5.2 x 106/unit respectively. A total of 26 units were analyzed for pH changes. Out of these units, 10 each were PRP-PC and BC-PC and 6 units were apheresis-PC. Their mean pH was 6.7±0.26 (mean±SD and ranged from 6.5 - 7.0 and no difference was observed among all three types of platelet concentrate. Conclusion: PRP-PC and BC-PC units were comparable in terms of swirling, platelet count per unit and pH. As expected, we found WBC contamination to be less in BC-PC than PRP-PC units. Variation in volume was more in BC-PC than PRP-PC units and this suggests that further standardization is required for preparation of BC-PC

  4. Molecular cloning and expression of prohormone convertases PC1 and PC2 in the pituitary gland of the bullfrog, Rana catesbeiana.

    Science.gov (United States)

    Yaoi, Yuichi; Suzuki, Masakazu; Tomura, Hideaki; Kikuyama, Sakae; Tanaka, Shigeyasu

    2003-09-01

    We cloned cDNAs encoding PC1 and PC2 from a cDNA library constructed for the anterior pituitary gland of the bullfrog (Rana catesbeiana) and sequenced them. The bullfrog PC1 cDNA consisted of 2972 base pairs (bp) with an open reading frame of 2208 bp and encoded a protein of 736 amino acids, including a putative signal peptide of 26 amino acids. The protein showed a high homology to R. ridibunda PC1 (95.1%) and mammalian PC1 (72.6%). The bullfrog PC2 cDNA consisted of 2242 bp with an open reading frame of 1914 bp and encoded a protein of 638 amino acids, including a putative signal peptide of 23 amino acids. This protein showed a high homology to R. ridibunda PC2 (95.5%) and mammalian PC2 (84.8%). The catalytic triad of serine proteinases of the subtilisin family was found at Asp-168, His-209, and Ser-383 in the PC1 protein and at Asp-167, His-208, and Ser-384 in the PC2 protein. In situ hybridization staining revealed that PC2 mRNA was detected in corticotrope cells of the tadpoles, but not in those of the adults. In the adult, only PC1 mRNA was detected in the pars distalis but both PC1 and PC2 mRNAs were detected in the pars intermedia. The data also showed that PC1 mRNA was expressed in gonadotrope cells.

  5. Effect of nanoscale SubPc interfacial layer on the performance of inverted polymer solar cells based on P3HT/PC71BM.

    Science.gov (United States)

    Kim, Jung Yong; Noh, Seunguk; Nam, Young Min; Kim, Jun Young; Roh, Jeongkyun; Park, Myeongjin; Amsden, Jason J; Yoon, Do Y; Lee, Changhee; Jo, Won Ho

    2011-11-01

    The effect of a nanoscale boron subphthalocyanine chloride (SubPc) interfacial layer on the performance of inverted polymer solar cells based on poly (3-hexyl thiophene) (P3HT) and [6,6]-phenyl-C(71)-butyric acid methyl ester (PC(71)BM) was studied. When a 1 nm SubPc layer was introduced between the active layer (P3HT:PC(71)BM) and MoO(x) in the device with ITO/ZnO/P3HT:PC(71)BM/SubPc/MoO(x)/Al configuration, the power conversion efficiency (PCE) was increased from 3.42 (without SubPc) to 3.59%. This improvement is mainly attributed to the enhanced open-circuit voltage from 0.62 to 0.64 V. When the Flory-Huggins interaction parameters were estimated from the solubility parameters through the contact angle measurement, it revealed that the interaction between SubPc and PC(71)BM is more attractive than that between SubPc and P3HT at the interface of P3HT:PC(71)BM/SubPc, through which charges are well transported from the active layer to the anode. This is supported by a decrease of the contact resistance from 5.49 (SubPc 0 nm) to 0.94 MΩ cm (SubPc 1 nm). The photoelectron spectra provide another evidence for the enhanced PCE, exhibiting that the 1 nm thick SubPc layer extracts more photoelectrons from the active layer than other thicknesses.

  6. The Aesthetics of Coding

    DEFF Research Database (Denmark)

    Andersen, Christian Ulrik

    2007-01-01

    Computer art is often associated with computer-generated expressions (digitally manipulated audio/images in music, video, stage design, media facades, etc.). In recent computer art, however, the code-text itself – not the generated output – has become the artwork (Perl Poetry, ASCII Art, obfuscated...... code, etc.). The presentation relates this artistic fascination of code to a media critique expressed by Florian Cramer, claiming that the graphical interface represents a media separation (of text/code and image) causing alienation to the computer’s materiality. Cramer is thus the voice of a new ‘code...... avant-garde’. In line with Cramer, the artists Alex McLean and Adrian Ward (aka Slub) declare: “art-oriented programming needs to acknowledge the conditions of its own making – its poesis.” By analysing the Live Coding performances of Slub (where they program computer music live), the presentation...

  7. LERC-SLAM - THE NASA LEWIS RESEARCH CENTER SATELLITE LINK ATTENUATION MODEL PROGRAM (IBM PC VERSION)

    Science.gov (United States)

    Manning, R. M.

    1994-01-01

    antenna required to establish a link with the satellite, the statistical parameters that characterize the rainrate process at the terminal site, the length of the propagation path within the potential rain region, and its projected length onto the local horizontal. The IBM PC version of LeRC-SLAM (LEW-14979) is written in Microsoft QuickBASIC for an IBM PC compatible computer with a monitor and printer capable of supporting an 80-column format. The IBM PC version is available on a 5.25 inch MS-DOS format diskette. The program requires about 30K RAM. The source code and executable are included. The Macintosh version of LeRC-SLAM (LEW-14977) is written in Microsoft Basic, Binary (b) v2.00 for Macintosh II series computers running MacOS. This version requires 400K RAM and is available on a 3.5 inch 800K Macintosh format diskette, which includes source code only. The Macintosh version was developed in 1987 and the IBM PC version was developed in 1989. IBM PC is a trademark of International Business Machines. MS-DOS is a registered trademark of Microsoft Corporation. Macintosh is a registered trademark of Apple Computer, Inc.

  8. The aeroelastic code FLEXLAST

    Energy Technology Data Exchange (ETDEWEB)

    Visser, B. [Stork Product Eng., Amsterdam (Netherlands)

    1996-09-01

    To support the discussion on aeroelastic codes, a description of the code FLEXLAST was given and experiences within benchmarks and measurement programmes were summarized. The code FLEXLAST has been developed since 1982 at Stork Product Engineering (SPE). Since 1992 FLEXLAST has been used by Dutch industries for wind turbine and rotor design. Based on the comparison with measurements, it can be concluded that the main shortcomings of wind turbine modelling lie in the field of aerodynamics, wind field and wake modelling. (au)

  9. Gauge color codes

    DEFF Research Database (Denmark)

    Bombin Palomo, Hector

    2015-01-01

    Color codes are topological stabilizer codes with unusual transversality properties. Here I show that their group of transversal gates is optimal and only depends on the spatial dimension, not the local geometry. I also introduce a generalized, subsystem version of color codes. In 3D they allow t...... the transversal implementation of a universal set of gates by gauge fixing, while error-dectecting measurements involve only four or six qubits....

  10. Doubled Color Codes

    Science.gov (United States)

    Bravyi, Sergey

    Combining protection from noise and computational universality is one of the biggest challenges in the fault-tolerant quantum computing. Topological stabilizer codes such as the 2D surface code can tolerate a high level of noise but implementing logical gates, especially non-Clifford ones, requires a prohibitively large overhead due to the need of state distillation. In this talk I will describe a new family of 2D quantum error correcting codes that enable a transversal implementation of all logical gates required for the universal quantum computing. Transversal logical gates (TLG) are encoded operations that can be realized by applying some single-qubit rotation to each physical qubit. TLG are highly desirable since they introduce no overhead and do not spread errors. It has been known before that a quantum code can have only a finite number of TLGs which rules out computational universality. Our scheme circumvents this no-go result by combining TLGs of two different quantum codes using the gauge-fixing method pioneered by Paetznick and Reichardt. The first code, closely related to the 2D color code, enables a transversal implementation of all single-qubit Clifford gates such as the Hadamard gate and the π / 2 phase shift. The second code that we call a doubled color code provides a transversal T-gate, where T is the π / 4 phase shift. The Clifford+T gate set is known to be computationally universal. The two codes can be laid out on the honeycomb lattice with two qubits per site such that the code conversion requires parity measurements for six-qubit Pauli operators supported on faces of the lattice. I will also describe numerical simulations of logical Clifford+T circuits encoded by the distance-3 doubled color code. Based on a joint work with Andrew Cross.

  11. Phonological coding during reading

    Science.gov (United States)

    Leinenger, Mallorie

    2014-01-01

    The exact role that phonological coding (the recoding of written, orthographic information into a sound based code) plays during silent reading has been extensively studied for more than a century. Despite the large body of research surrounding the topic, varying theories as to the time course and function of this recoding still exist. The present review synthesizes this body of research, addressing the topics of time course and function in tandem. The varying theories surrounding the function of phonological coding (e.g., that phonological codes aid lexical access, that phonological codes aid comprehension and bolster short-term memory, or that phonological codes are largely epiphenomenal in skilled readers) are first outlined, and the time courses that each maps onto (e.g., that phonological codes come online early (pre-lexical) or that phonological codes come online late (post-lexical)) are discussed. Next the research relevant to each of these proposed functions is reviewed, discussing the varying methodologies that have been used to investigate phonological coding (e.g., response time methods, reading while eyetracking or recording EEG and MEG, concurrent articulation) and highlighting the advantages and limitations of each with respect to the study of phonological coding. In response to the view that phonological coding is largely epiphenomenal in skilled readers, research on the use of phonological codes in prelingually, profoundly deaf readers is reviewed. Finally, implications for current models of word identification (activation-verification model (Van Order, 1987), dual-route model (e.g., Coltheart, Rastle, Perry, Langdon, & Ziegler, 2001), parallel distributed processing model (Seidenberg & McClelland, 1989)) are discussed. PMID:25150679

  12. Application of sPC-SAFT and group contribution sPC-SAFT to polymer systems-Capabilities and limitations

    DEFF Research Database (Denmark)

    Tihic, Amra; von Solms, Nicolas; Michelsen, Michael Locht

    2009-01-01

    PC-SAFT model, with and without GC. The reported results contribute to a better understanding of the applicability of the sPC-SAFT model to binary polymer mixtures, and identify both models as good predictive tools for several industrial applications. Limitations are also identified and discussed....... predictive capability of the model demonstrates satisfactory description of the fluid behaviour of several polymer systems, including both vapour-liquid equilibria and liquid-liquid equilibria. This work continues the systematic study on phase behaviour of polymer systems with the two versions of the s...

  13. MORSE Monte Carlo code

    Energy Technology Data Exchange (ETDEWEB)

    Cramer, S.N.

    1984-01-01

    The MORSE code is a large general-use multigroup Monte Carlo code system. Although no claims can be made regarding its superiority in either theoretical details or Monte Carlo techniques, MORSE has been, since its inception at ORNL in the late 1960s, the most widely used Monte Carlo radiation transport code. The principal reason for this popularity is that MORSE is relatively easy to use, independent of any installation or distribution center, and it can be easily customized to fit almost any specific need. Features of the MORSE code are described.

  14. Bar Code Labels

    Science.gov (United States)

    1988-01-01

    American Bar Codes, Inc. developed special bar code labels for inventory control of space shuttle parts and other space system components. ABC labels are made in a company-developed anodizing aluminum process and consecutively marketed with bar code symbology and human readable numbers. They offer extreme abrasion resistance and indefinite resistance to ultraviolet radiation, capable of withstanding 700 degree temperatures without deterioration and up to 1400 degrees with special designs. They offer high resistance to salt spray, cleaning fluids and mild acids. ABC is now producing these bar code labels commercially or industrial customers who also need labels to resist harsh environments.

  15. QR codes for dummies

    CERN Document Server

    Waters, Joe

    2012-01-01

    Find out how to effectively create, use, and track QR codes QR (Quick Response) codes are popping up everywhere, and businesses are reaping the rewards. Get in on the action with the no-nonsense advice in this streamlined, portable guide. You'll find out how to get started, plan your strategy, and actually create the codes. Then you'll learn to link codes to mobile-friendly content, track your results, and develop ways to give your customers value that will keep them coming back. It's all presented in the straightforward style you've come to know and love, with a dash of humor thrown

  16. MORSE Monte Carlo code

    International Nuclear Information System (INIS)

    Cramer, S.N.

    1984-01-01

    The MORSE code is a large general-use multigroup Monte Carlo code system. Although no claims can be made regarding its superiority in either theoretical details or Monte Carlo techniques, MORSE has been, since its inception at ORNL in the late 1960s, the most widely used Monte Carlo radiation transport code. The principal reason for this popularity is that MORSE is relatively easy to use, independent of any installation or distribution center, and it can be easily customized to fit almost any specific need. Features of the MORSE code are described

  17. Tokamak Systems Code

    International Nuclear Information System (INIS)

    Reid, R.L.; Barrett, R.J.; Brown, T.G.

    1985-03-01

    The FEDC Tokamak Systems Code calculates tokamak performance, cost, and configuration as a function of plasma engineering parameters. This version of the code models experimental tokamaks. It does not currently consider tokamak configurations that generate electrical power or incorporate breeding blankets. The code has a modular (or subroutine) structure to allow independent modeling for each major tokamak component or system. A primary benefit of modularization is that a component module may be updated without disturbing the remainder of the systems code as long as the imput to or output from the module remains unchanged

  18. ARC Code TI: ACCEPT

    Data.gov (United States)

    National Aeronautics and Space Administration — ACCEPT consists of an overall software infrastructure framework and two main software components. The software infrastructure framework consists of code written to...

  19. CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (IBM PC VERSION WITH CLIPSITS)

    Science.gov (United States)

    Riley, , .

    1994-01-01

    The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh

  20. Program EPICSHOW. A computer code to allow interactive viewing of the EPIC data libraries (Version 98-1). Summary documentation

    International Nuclear Information System (INIS)

    Pronyaev, V.G.; McLaughlin, P.K.

    1999-01-01

    EPICSHOW (Electron Photon Interactive Code - Show Data) is an interactive graphics code that allows users to view and interact with neutron, photon, electron and light charged particle data. Besides on screen graphics the code provides hard copy in the form of tabulated listings and Postscript output files. The code has been implemented on UNIX, IBM-PC, Power MAC, and even Laptop computers. It should be relatively easy to use it on almost any computer. All of the data included in this system is based on the Lawrence Livermore National Laboratory Databases and the neutron and photon data is used in the TART97 Monte Carlo transport code system. (author)

  1. Privacy Impact Assessment for the PC Label System

    Science.gov (United States)

    The PC Label System collects contact information for individuals with an interest in EPA's Region 1. Learn how this data will be collected in the system, how it will be used, access to the data, the purpose of data collection, and record retention policies

  2. Nonylphenol diethoxylate inhibits apoptosis induced in PC12 cells.

    Science.gov (United States)

    Liu, Chuang; Sun, Yongkun; Song, Yutong; Saito, Takeshi; Kurasaki, Masaaki

    2016-11-01

    Nonylphenol and short-chain nonylphenol ethoxylates such as NP 2 EO are present in aquatic environment as wastewater contaminants, and their toxic effects on aquatic species have been reported. Apoptosis has been shown to be induced by serum deprivation or copper treatment. To understand the toxicity of nonylphenol diethoxylate, we investigated the effects of NP 2 EO on apoptosis induced by serum deprivation and copper by using PC12 cell system. Nonylphenol diethoxylate itself showed no toxicity and recovered cell viability from apoptosis. In addition, nonylphenol diethoxylate decreased DNA fragmentation caused by apoptosis in PC12 cells. This phenomenon was confirmed after treating apoptotic PC12 cells with nonylphenol diethoxylate, whereas the cytochrome c release into the cytosol decreased as compared to that in apoptotic cells not treated with nonylphenol diethoxylates. Furthermore, Bax contents in apoptotic cells were reduced after exposure to nonylphenol diethoxylate. Thus, nonylphenol diethoxylate has the opposite effect on apoptosis in PC12 cells compared to nonylphenol, which enhances apoptosis induced by serum deprivation. The difference in structure of the two compounds is hypothesized to be responsible for this phenomenon. These results indicated that nonylphenol diethoxylate has capability to affect cell differentiation and development and has potentially harmful effect on organisms because of its unexpected impact on apoptosis. © 2015 Wiley Periodicals, Inc. Environ Toxicol 31: 1389-1398, 2016. © 2015 Wiley Periodicals, Inc.

  3. IBM PC based automatic drive system for Bulat setup

    International Nuclear Information System (INIS)

    Luchaninov, A.A.; Tolok, V.T.

    1999-01-01

    Non-expensive computer drive system for Bulat setup is described. System's hardware consists of IBM PC and conjunction block, providing 12 output channels, Software includes the main program, utilities and technology processes database. System may be used at surface modification processes, especially multilayer multicomponent coatings deposition

  4. Pc1 with a broad frequency spectrum - "Goose pulsations"

    Czech Academy of Sciences Publication Activity Database

    Feygin, F. Z.; Prikner, Karel; Kangas, J.

    2009-01-01

    Roč. 53, č. 4 (2009), s. 519-536 ISSN 0039-3169 Institutional research plan: CEZ:AV0Z30120515 Keywords : geomagnetic pulsations * nonlinear particle-wave interaction * Pc1 wave packets * ionospheric Alfvén resonator (IAR) Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 1.000, year: 2009

  5. PC vs. Mac--Which Way Should You Go?

    Science.gov (United States)

    Wodarz, Nan

    1997-01-01

    Outlines the factors in hardware, software, and administration to consider in developing specifications for choosing a computer operating system. Compares Microsoft Windows 95/NT that runs on PC/Intel-based systems and System 7.5 that runs on the Apple-based systems. Lists reasons why the Microsoft platform clearly stands above the Apple platform.…

  6. Level of personal computer (PC) tablet penetration among ...

    African Journals Online (AJOL)

    ... of PC tablet should be limited to academic activities only, increase the bandwidth of internet connection so that students can have full access to internet to download educational material and to increase learning pace among others. Keywords: Touch-screen, personal computer, information and communication technology, ...

  7. Comparison between a newly developed PC-based Doppler ...

    African Journals Online (AJOL)

    Objectives. To determine the accuracy of the resistance index (RI) of flow velocity waveforms of the umbilical artery measured using a newly developed PC-based continuous wave Doppler device (Umbiflow) with regard to systematic and random variations when compared with a commercial standard (Vasoflow). Design.

  8. Characteristics of CoPc/CdS hybrid diode device

    Indian Academy of Sciences (India)

    Administrator

    The results encourage utilizing CoPc as absorber organic material for solar cells. Keywords. Asymmetric Co(II)phthalocyanine; ... CdS and organic MPcs are also promising structures for solar cell applications because of their ... line structure with the strong intensity for plane (101) at. 2θ °= 28°. Figures 2 and 3 show the ...

  9. Antitumor effects of chrysanthemin in PC-3 human prostate cancer ...

    African Journals Online (AJOL)

    ... caspase-3, 8 and 9 in a dose-dependent fashion. Conclusions: The study concluded that chrysanthemin ledanticancer effects in PC-3 prostate cancer cells by inducing apoptosis, activating caspasesignaling pathway and loss of mitochondrial membrane potential. Keywords: Chrysanthemin, anthocyanin, prostate cancer, ...

  10. Design and Development of a PC- Based temperature monitoring ...

    African Journals Online (AJOL)

    The design of the work involves a circuit that measures the surrounding temperature using appropriate sensors and the sensor output is then converted to digital signals after due processing and conditioning of the signals. There is also an interface circuit configured to make it compatible with the PC hardware. This design ...

  11. Orpinomyces cellulase celf protein and coding sequences

    Science.gov (United States)

    Li, Xin-Liang; Chen, Huizhong; Ljungdahl, Lars G.

    2000-09-05

    A cDNA (1,520 bp), designated celF, consisting of an open reading frame (ORF) encoding a polypeptide (CelF) of 432 amino acids was isolated from a cDNA library of the anaerobic rumen fungus Orpinomyces PC-2 constructed in Escherichia coli. Analysis of the deduced amino acid sequence showed that starting from the N-terminus, CelF consists of a signal peptide, a cellulose binding domain (CBD) followed by an extremely Asn-rich linker region which separate the CBD and the catalytic domains. The latter is located at the C-terminus. The catalytic domain of CelF is highly homologous to CelA and CelC of Orpinomyces PC-2, to CelA of Neocallimastix patriciarum and also to cellobiohydrolase IIs (CBHIIs) from aerobic fungi. However, Like CelA of Neocallimastix patriciarum, CelF does not have the noncatalytic repeated peptide domain (NCRPD) found in CelA and CelC from the same organism. The recombinant protein CelF hydrolyzes cellooligosaccharides in the pattern of CBHII, yielding only cellobiose as product with cellotetraose as the substrate. The genomic celF is interrupted by a 111 bp intron, located within the region coding for the CBD. The intron of the celF has features in common with genes from aerobic filamentous fungi.

  12. On {\\sigma}-LCD codes

    OpenAIRE

    Carlet, Claude; Mesnager, Sihem; Tang, Chunming; Qi, Yanfeng

    2017-01-01

    Linear complementary pairs (LCP) of codes play an important role in armoring implementations against side-channel attacks and fault injection attacks. One of the most common ways to construct LCP of codes is to use Euclidean linear complementary dual (LCD) codes. In this paper, we first introduce the concept of linear codes with $\\sigma$ complementary dual ($\\sigma$-LCD), which includes known Euclidean LCD codes, Hermitian LCD codes, and Galois LCD codes. As Euclidean LCD codes, $\\sigma$-LCD ...

  13. Efficient Server-Aided 2PC for Mobile Phones

    Directory of Open Access Journals (Sweden)

    Mohassel Payman

    2016-04-01

    Full Text Available Secure Two-Party Computation (2PC protocols allow two parties to compute a function of their private inputs without revealing any information besides the output of the computation. There exist low cost general-purpose protocols for semi-honest parties that can be efficiently executed even on smartphones. However, for the case of malicious parties, current 2PC protocols are significantly less efficient, limiting their use to more resourceful devices. In this work we present an efficient 2PC protocol that is secure against malicious parties and is light enough to be used on mobile phones. The protocol is an adaptation of the protocol of Nielsen et al. (Crypto, 2012 to the Server-Aided setting, a natural relaxation of the plain model for secure computation that allows the parties to interact with a server (e.g., a cloud who is assumed not to collude with any of the parties. Our protocol has two stages: In an offline stage - where no party knows which function is to be computed, nor who else is participating - each party interacts with the server and downloads a file. Later, in the online stage, when two parties decide to execute a 2PC together, they can use the files they have downloaded earlier to execute the computation with cost that is lower than the currently best semi-honest 2PC protocols. We show an implementation of our protocol for Android mobile phones, discuss several optimizations and report on its evaluation for various circuits. For example, the online stage for evaluating a single AES circuit requires only 2.5 seconds and can be further reduced to 1 second (amortized time with multiple executions.

  14. Melt crystallization of bisphenol A polycarbonate in PC/zinc sulfonated polystyrene ionomer blend

    Science.gov (United States)

    Xu, Liang

    The effects of zinc sulfonated polystyrene ionomer (ZnSPS) on the melt crystallization of bisphenol A polycarbonate (PC) were investigated. Melt crystallization of pure PC is extremely slow due to its rigid chain. In the blend of PC and ZnSPS (PC-ZnSPS), the melt crystallization rate of PC can be enhanced. DSC was used to study the crystallization kinetics of PC in PC-ZnSPS blend. The crystallization of PC at 190°C increased in both partially miscible and miscible blends with ZnSPS. For PC-ZnSPS blend with same PC composition as 80%, the crystallization rate was affected by the sulfonation level of ZnSPS. The induction time of crystallization for a partially miscible blend PC-ZnSPS9.98 (80/20) was 40 minutes, and the crystallization reaches 27% crystallinity within 14 hrs. The induction time for pure PC with the same thermal history was more than 24 hrs. The crystal structure of PC crystal formed in PC-ZnSPS blend was studied by WAXD, which showed no difference from the reported WAXD pattern for pure PC. Molecular weight change of PC was found during the thermal annealing of PC-ZnSPS blend at 190°C, but molecular weight alone cannot explain the change of crystallization rate of PC in PC-ZnSPS blend. Discussion was made to address the mechanisms that are responsible for the crystallization rate enhancement of PC in PC-ZnSPS blend. In order to understand and elucidate the reason for the molecular weight change of PC in PC-ZnSPS blend and its effect on the crystallization of PC, TG, GPC and GC-MS were used to investigate the stability of PC-ZnSPS blend and mixtures of PC with sodium tosylate (NaTS), zinc tosylate (ZnTS) and sodium benzoate (NaBZ). ZnSPS, NaTS and ZnTS undergo desulfonation of the sulfonate group at temperatures above 350°C. The desulfonation process can destabilize PC and lower the maximum mass loss rate temperature of PC for more than 70°C. NaTS, ZnTS and NaBZ have quite different effect on the thermal stability of PC at temperatures below 250

  15. Opening up codings?

    DEFF Research Database (Denmark)

    Steensig, Jakob; Heinemann, Trine

    2015-01-01

    We welcome Tanya Stivers’s discussion (Stivers, 2015/this issue) of coding social interaction and find that her descriptions of the processes of coding open up important avenues for discussion, among other things of the precise ad hoc considerations that researchers need to bear in mind, both when...

  16. Error Correcting Codes -34 ...

    Indian Academy of Sciences (India)

    Science, Bangalore. Her interests are in. Theoretical Computer. Science. SERIES I ARTICLE. Error Correcting Codes. 2. The Hamming Codes. Priti Shankar. In the first article of this series we showed how redundancy introduced into a message transmitted over a noisy channel could improve the reliability of transmission. In.

  17. Decoding Codes on Graphs

    Indian Academy of Sciences (India)

    set up a well defined goal - that of achieving a per- formance bound set by the noisy channel coding theo- rem, proved in the paper. Whereas the goal appeared elusive twenty five years ago, today, there are practi- cal codes and decoding algorithms that come close to achieving it. It is interesting to note that all known.

  18. Error Correcting Codes

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 3. Error Correcting Codes - Reed Solomon Codes. Priti Shankar. Series Article Volume 2 Issue 3 March 1997 pp 33-47. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/002/03/0033-0047 ...

  19. Insurance billing and coding.

    Science.gov (United States)

    Napier, Rebecca H; Bruelheide, Lori S; Demann, Eric T K; Haug, Richard H

    2008-07-01

    The purpose of this article is to highlight the importance of understanding various numeric and alpha-numeric codes for accurately billing dental and medically related services to private pay or third-party insurance carriers. In the United States, common dental terminology (CDT) codes are most commonly used by dentists to submit claims, whereas current procedural terminology (CPT) and International Classification of Diseases, Ninth Revision, Clinical Modification (ICD.9.CM) codes are more commonly used by physicians to bill for their services. The CPT and ICD.9.CM coding systems complement each other in that CPT codes provide the procedure and service information and ICD.9.CM codes provide the reason or rationale for a particular procedure or service. These codes are more commonly used for "medical necessity" determinations, and general dentists and specialists who routinely perform care, including trauma-related care, biopsies, and dental treatment as a result of or in anticipation of a cancer-related treatment, are likely to use these codes. Claim submissions for care provided can be completed electronically or by means of paper forms.

  20. Codes of Conduct

    Science.gov (United States)

    Million, June

    2004-01-01

    Most schools have a code of conduct, pledge, or behavioral standards, set by the district or school board with the school community. In this article, the author features some schools that created a new vision of instilling code of conducts to students based on work quality, respect, safety and courtesy. She suggests that communicating the code…

  1. Decoding Codes on Graphs

    Indian Academy of Sciences (India)

    Department of Computer. Science 'and Automation,. lISe. Their research addresses ... The fifty five year old history of error correcting codes began with Claude Shannon's path-breaking paper en- titled 'A ... given the limited computing power available then, Gal- lager's codes were not considered practical. A landmark.

  2. Error Correcting Codes

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 3. Error Correcting Codes - Reed Solomon Codes. Priti Shankar. Series Article Volume 2 Issue 3 March ... Author Affiliations. Priti Shankar1. Department of Computer Science and Automation, Indian Institute of Science, Bangalore 560 012, India ...

  3. Decoding Codes on Graphs

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 8; Issue 9. Decoding Codes on Graphs - Low Density Parity Check Codes. A S Madhu Aditya Nori. General Article Volume 8 Issue 9 September 2003 pp 49-59. Fulltext. Click here to view fulltext PDF. Permanent link:

  4. READING A NEURAL CODE

    NARCIS (Netherlands)

    BIALEK, W; RIEKE, F; VANSTEVENINCK, RRD; WARLAND, D

    1991-01-01

    Traditional approaches to neural coding characterize the encoding of known stimuli in average neural responses. Organisms face nearly the opposite task - extracting information about an unknown time-dependent stimulus from short segments of a spike train. Here the neural code was characterized from

  5. Overexpression of 15-lipoxygenase-1 in PC-3 human prostate cancer cells increases tumorigenesis.

    Science.gov (United States)

    Kelavkar, U P; Nixon, J B; Cohen, C; Dillehay, D; Eling, T E; Badr, K F

    2001-11-01

    The effect of overexpression of 15-lipoxygenase-1 (15-LO-1) was studied in the human prostate cancer cell line, PC-3. Stable PC-3 cell lines were generated by transfection with 15-LO-1-sense (15-LOS), 15-LO-1-antisense (15-LOAS) or vector (Zeo) and selection with Zeocin. After characterization by RT-PCR, western and HPLC, a PC3-15LOS clone was selected that possessed 10-fold 15-LO-1 enzyme activity compared with parental PC-3 cells. The PC3-15LOAS clone displayed little or no 15-LO-1 activity. These PC-3 cell lines were characterized for properties of tumorigenesis. The proliferation rates of the cell lines were as follows: PC3-15LOS > PC-3 = PC3-Zeo > PC3-15LOAS. Addition of a specific 15-LO-1 inhibitor, PD146176, caused a dose-dependent inhibition of proliferation in vitro. Overexpression of 15-LO-1 also caused [(3)H]thymidine incorporation to increase by 4.0-fold (P < 0.01). Compared with parental and PC-3-Zeo cells, PC3-15LOS enhanced whereas PC3-15LOAS reduced the ability of PC-3 cells to grow in an anchorage-independent manner, as assessed by colony formation in soft agar. These data suggested a pro-tumorigenic role for 15-LO-1 in PC-3 cells in vitro. Therefore, to clarify the role of 15-LO-1 in vivo, the effect of 15-LO-1 expression on the growth of tumors in nude mice was investigated. The PC-3 cell lines were inoculated subcutaneously into athymic nude mice. The frequency of tumor formation was increased and the sizes of the tumors formed were much larger in the PC3-15LOS compared with PC3-15LOAS, parental PC-3 and PC-3-Zeo cells. Immunohistochemistry for 15-LO-1 confirmed expression throughout the duration of the experiment. The expression of factor VIII, an angiogenesis marker, in tumor sections was increased in tumors derived from PC3-15LOS cells and decreased in those from PC3-15LOAS cells compared with tumors from parental or Zeo cells. These data further supported the evaluation by ELISA of vascular endothelial growth factor (VEGF) secretion by PC-3

  6. Surface-type nonvolatile electric memory elements based on organic-on-organic CuPc-H2Pc heterojunction

    International Nuclear Information System (INIS)

    Karimov, Khasan S.; Muqeet Rehman, M.; Zameer Abbas, S.; Ahmad, Zubair; Touati, Farid; Mahroof-Tahir, M.

    2015-01-01

    A novel surface-type nonvolatile electric memory elements based on organic semiconductors CuPc and H 2 Pc are fabricated by vacuum deposition of the CuPc and H 2 Pc films on preliminary deposited metallic (Ag and Cu) electrodes. The gap between Ag and Cu electrodes is 30–40 μm. For the current–voltage (I–V) characteristics the memory effect, switching effect, and negative differential resistance regions are observed. The switching mechanism is attributed to the electric-field-induced charge transfer. As a result the device switches from a low to a high-conductivity state and then back to a low conductivity state if the opposite polarity voltage is applied. The ratio of resistance at the high resistance state to that at the low resistance state is equal to 120–150. Under the switching condition, the electric current increases ∼ 80–100 times. A comparison between the forward and reverse I–V characteristics shows the presence of rectifying behavior. (paper)

  7. Fracture flow code

    International Nuclear Information System (INIS)

    Dershowitz, W; Herbert, A.; Long, J.

    1989-03-01

    The hydrology of the SCV site will be modelled utilizing discrete fracture flow models. These models are complex, and can not be fully cerified by comparison to analytical solutions. The best approach for verification of these codes is therefore cross-verification between different codes. This is complicated by the variation in assumptions and solution techniques utilized in different codes. Cross-verification procedures are defined which allow comparison of the codes developed by Harwell Laboratory, Lawrence Berkeley Laboratory, and Golder Associates Inc. Six cross-verification datasets are defined for deterministic and stochastic verification of geometric and flow features of the codes. Additional datasets for verification of transport features will be documented in a future report. (13 figs., 7 tabs., 10 refs.) (authors)

  8. Validation of thermalhydraulic codes

    International Nuclear Information System (INIS)

    Wilkie, D.

    1992-01-01

    Thermalhydraulic codes require to be validated against experimental data collected over a wide range of situations if they are to be relied upon. A good example is provided by the nuclear industry where codes are used for safety studies and for determining operating conditions. Errors in the codes could lead to financial penalties, to the incorrect estimation of the consequences of accidents and even to the accidents themselves. Comparison between prediction and experiment is often described qualitatively or in approximate terms, e.g. ''agreement is within 10%''. A quantitative method is preferable, especially when several competing codes are available. The codes can then be ranked in order of merit. Such a method is described. (Author)

  9. CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (IBM PC VERSION)

    Science.gov (United States)

    Donnell, B.

    1994-01-01

    COOL (that is, a rule can pattern match on objects created using COOL). CLIPS 6.0 provides the capability to define functions, overloaded functions, and global variables interactively. In addition, CLIPS can be embedded within procedural code, called as a subroutine, and integrated with languages such as C, FORTRAN and Ada. CLIPS can be easily extended by a user through the use of several well-defined protocols. CLIPS provides several delivery options for programs including the ability to generate stand alone executables or to load programs from text or binary files. CLIPS 6.0 provides support for the modular development and execution of knowledge bases with the defmodule construct. CLIPS modules allow a set of constructs to be grouped together such that explicit control can be maintained over restricting the access of the constructs by other modules. This type of control is similar to global and local scoping used in languages such as C or Ada. By restricting access to deftemplate and defclass constructs, modules can function as blackboards, permitting only certain facts and instances to be seen by other modules. Modules are also used by rules to provide execution control. The CRSV (Cross-Reference, Style, and Verification) utility included with previous version of CLIPS is no longer supported. The capabilities provided by this tool are now available directly within CLIPS 6.0 to aid in the development, debugging, and verification of large rule bases. COSMIC offers four distribution versions of CLIPS 6.0: UNIX (MSC-22433), VMS (MSC-22434), MACINTOSH (MSC-22429), and IBM PC (MSC-22430). Executable files, source code, utilities, documentation, and examples are included on the program media. All distribution versions include identical source code for the command line version of CLIPS 6.0. This source code should compile on any platform with an ANSI C compiler. Each distribution version of CLIPS 6.0, except that for the Macintosh platform, includes an executable for the

  10. METHANE de-NOX for Utility PC Boilers

    Energy Technology Data Exchange (ETDEWEB)

    Bruce Bryan; Serguei Nester; Joseph Rabovitser; Stan Wohadlo

    2005-09-30

    The overall project objective is the development and validation of an innovative combustion system, based on a novel coal preheating concept prior to combustion, that can reduce NO{sub x} emissions to 0.15 lb/million Btu or less on utility pulverized coal (PC) boilers. This NO{sub x} reduction should be achieved without loss of boiler efficiency or operating stability, and at more than 25% lower levelized cost than state-of-the-art SCR technology. A further objective is to ready technology for full-scale commercial deployment to meet the market demand for NO{sub x} reduction technologies. Over half of the electric power generated in the U.S. is produced by coal combustion, and more than 80% of these units utilize PC combustion technology. Conventional measures for NOx reduction in PC combustion processes rely on combustion and post-combustion modifications. A variety of combustion-based NO{sub x} reduction technologies are in use today, including low-NO{sub x} burners (LNBs), flue gas recirculation (FGR), air staging, and natural gas or other fuel reburning. Selective non-catalytic reduction (SNCR) and selective catalytic reduction (SCR) are post-combustion techniques. NO{sub x} reduction effectiveness from these technologies ranges from 30 to 60% and up to 90-93% for SCR. Typically, older wall-fired PC burner units produce NO{sub x} emissions in the range of 0.8-1.6 lb/million Btu. Low-NO{sub x} burner systems, using combinations of fuel staging within the burner and air staging by introduction of overfire air in the boiler, can reduce NO{sub x} emissions by 50-60%. This approach alone is not sufficient to meet the desired 0.15 lb/million Btu NO{sub x} standard with a range of coals and boiler loads. Furthermore, the heavy reliance on overfire air can lead to increased slagging and corrosion in furnaces, particularly with higher-sulfur coals, when LNBs are operated at sub-stoichiometric conditions to reduce fuel-derived NOx in the flame. Therefore, it is desirable

  11. Conversion of a mainframe simulation for maintenance performance to a PC environment

    International Nuclear Information System (INIS)

    Gertman, D.I.

    1991-01-01

    A computer-based simulation capable of generating human error probabilities (HEPs) for maintenance activities is presented. The HEPs are suitable for use in probabilistic risk assessments (PRAs) and are an important source of information for data management systems such as NUCLARR- the Nuclear Computerized Library for Assessing Reactor Reliability. (1) The basic computer model MAPPS--the maintenance personnel performance simulation has been developed and validated by the US NRC in order to improve maintenance practices and procedures at nuclear power plants. This model validated previously, has now been implemented and improved, in a PC environment, and renamed MicroMAPPS. The model is stochastically based, able to simulate the performance of 2 to 15 person crews for a variety of maintenance conditions. These conditions include aspects of crew actions as potentially influenced by the task, the environment, or characteristics of the personnel involved. The nature of the software code makes it particularly appropriate for determining changes in HEP rates due to fluctuations in important task, environment,. or personnel parameters. The presentation presents a brief review of the mainframe version of the code and presents a summarization of the enhancements which dramatically change the nature of the human computer interaction

  12. Electronic transitions and band offsets in C60:SubPc and C60:MgPc on MoO3 studied by modulated surface photovoltage spectroscopy

    International Nuclear Information System (INIS)

    Fengler, S.; Dittrich, Th.; Rusu, M.

    2015-01-01

    Electronic transitions at interfaces between MoO 3 layers and organic layers of C 60 , SubPc, MgPc, and nano-composite layers of SubPc:C 60 and MgPc:C 60 have been studied by modulated surface photovoltage (SPV) spectroscopy. For all systems, time dependent and modulated SPV signals pointed to dissociation of excitons at the MoO 3 /organic layer interfaces with a separation of holes towards MoO 3 . The highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gaps (E HL ) of C 60 , SubPc, and MgPc and the effective E HL of SubPc:C 60 and MgPc:C 60 were measured. The offsets between the LUMO (ΔE L ) or HOMO (ΔE H ) bands were obtained with high precision and amounted to 0.33 or 0.73 eV for SubPc:C 60 , respectively, and to −0.33 or 0.67 eV for MgPc:C 60 , respectively. Exponential tails below E HL and most pronounced sub-bandgap transitions were characterized and ascribed to disorder and transitions from HOMO bands to unoccupied defect states

  13. Report number codes

    International Nuclear Information System (INIS)

    Nelson, R.N.

    1985-05-01

    This publication lists all report number codes processed by the Office of Scientific and Technical Information. The report codes are substantially based on the American National Standards Institute, Standard Technical Report Number (STRN)-Format and Creation Z39.23-1983. The Standard Technical Report Number (STRN) provides one of the primary methods of identifying a specific technical report. The STRN consists of two parts: The report code and the sequential number. The report code identifies the issuing organization, a specific program, or a type of document. The sequential number, which is assigned in sequence by each report issuing entity, is not included in this publication. Part I of this compilation is alphabetized by report codes followed by issuing installations. Part II lists the issuing organization followed by the assigned report code(s). In both Parts I and II, the names of issuing organizations appear for the most part in the form used at the time the reports were issued. However, for some of the more prolific installations which have had name changes, all entries have been merged under the current name

  14. Report number codes

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, R.N. (ed.)

    1985-05-01

    This publication lists all report number codes processed by the Office of Scientific and Technical Information. The report codes are substantially based on the American National Standards Institute, Standard Technical Report Number (STRN)-Format and Creation Z39.23-1983. The Standard Technical Report Number (STRN) provides one of the primary methods of identifying a specific technical report. The STRN consists of two parts: The report code and the sequential number. The report code identifies the issuing organization, a specific program, or a type of document. The sequential number, which is assigned in sequence by each report issuing entity, is not included in this publication. Part I of this compilation is alphabetized by report codes followed by issuing installations. Part II lists the issuing organization followed by the assigned report code(s). In both Parts I and II, the names of issuing organizations appear for the most part in the form used at the time the reports were issued. However, for some of the more prolific installations which have had name changes, all entries have been merged under the current name.

  15. Laser propagation code study

    OpenAIRE

    Rockower, Edward B.

    1985-01-01

    A number of laser propagation codes have been assessed as to their suitability for modeling Army High Energy Laser (HEL) weapons used in an anti- sensor mode. We identify a number of areas in which systems analysis HEL codes are deficient. Most notably, available HEL scaling law codes model the laser aperture as circular, possibly with a fixed (e.g. 10%) obscuration. However, most HELs have rectangular apertures with up to 30% obscuration. We present a beam-quality/aperture shape scaling rela...

  16. Transport theory and codes

    International Nuclear Information System (INIS)

    Clancy, B.E.

    1986-01-01

    This chapter begins with a neutron transport equation which includes the one dimensional plane geometry problems, the one dimensional spherical geometry problems, and numerical solutions. The section on the ANISN code and its look-alikes covers problems which can be solved; eigenvalue problems; outer iteration loop; inner iteration loop; and finite difference solution procedures. The input and output data for ANISN is also discussed. Two dimensional problems such as the DOT code are given. Finally, an overview of the Monte-Carlo methods and codes are elaborated on

  17. Gravity inversion code

    International Nuclear Information System (INIS)

    Burkhard, N.R.

    1979-01-01

    The gravity inversion code applies stabilized linear inverse theory to determine the topography of a subsurface density anomaly from Bouguer gravity data. The gravity inversion program consists of four source codes: SEARCH, TREND, INVERT, and AVERAGE. TREND and INVERT are used iteratively to converge on a solution. SEARCH forms the input gravity data files for Nevada Test Site data. AVERAGE performs a covariance analysis on the solution. This document describes the necessary input files and the proper operation of the code. 2 figures, 2 tables

  18. Decoding the productivity code

    DEFF Research Database (Denmark)

    Hansen, David

    , that is, the productivity code of the 21st century, is dissolved. Today, organizations are pressured for operational efficiency, often in terms of productivity, due to increased global competition, demographical changes, and use of natural resources. Taylor’s principles for rationalization founded...... that swing between rationalization and employee development. The productivity code is the lack of alternatives to this ineffective approach. This thesis decodes the productivity code based on the results from a 3-year action research study at a medium-sized manufacturing facility. During the project period...

  19. CALIPSOS code report

    International Nuclear Information System (INIS)

    Fanselau, R.W.; Thakkar, J.G.; Hiestand, J.W.; Cassell, D.S.

    1980-04-01

    CALIPSOS is a steady-state three-dimensional flow distribution code which predicts the fluid dynamics and heat transfer interactions of the secondary two-phase flow in a steam generator. The mathematical formulation is sufficiently general to accommodate two fluid models described by separate gas and liquid momentum equations. However, if the user selects the homogeneous flow option, the code automatically equates the gas and liquid phase velocities (thereby reducing the number of momentum equations solved to three) and utilizes a homogeneous density mixture. This report presents the basic features of the CALIPSOS code and includes assumptions, equations solved, the finite-difference grid, and highlights of the solution procedure

  20. Cryptography cracking codes

    CERN Document Server

    2014-01-01

    While cracking a code might seem like something few of us would encounter in our daily lives, it is actually far more prevalent than we may realize. Anyone who has had personal information taken because of a hacked email account can understand the need for cryptography and the importance of encryption-essentially the need to code information to keep it safe. This detailed volume examines the logic and science behind various ciphers, their real world uses, how codes can be broken, and the use of technology in this oft-overlooked field.

  1. Kondrashov Gammas. PC database for gamma-rays from radionuclides. Summary documentation

    International Nuclear Information System (INIS)

    Lemmel, H.D.

    1996-01-01

    A PC database by V. Kondrashov containing energies and yields of gamma-rays from radionuclides is described. The PC diskette is available from the IAEA Nuclear Data Section, cost free upon request. (author)

  2. Efficient Techniques for Formal Verification of PowerPC 750 Executables, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — We will develop an efficient tool for formal verification of PowerPC 750 executables. The PowerPC 750 architecture is used in the radiation-hardened RAD750...

  3. DIFFERENTIAL MODULATION OF CATECHOLAMINES BY CHLOROTRIAZINE HERBICIDES IN PHEOCHROMOCYTOMA (PC12) CELLS IN VITRO

    Science.gov (United States)

    Differential modulation of catecholamines by chlorotriazine herbicides in pheochromocytoma (PC12) cells in vitro.Das PC, McElroy WK, Cooper RL.Curriculum in Toxicology, University of North Carolina, Chapel Hill 27599, USA.Epidemiological, wildlife, and lab...

  4. Efficient Techniques for Formal Verification of PowerPC 750 Executables, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We will develop an efficient tool for formal verification of PowerPC 750 executables. The PowerPC 750 architecture is used in the radiation-hardened RAD750...

  5. METHANE de-NOX for Utility PC Boilers

    Energy Technology Data Exchange (ETDEWEB)

    Joseph Rabovitser; Serguei Nester; Stan Wohadlo

    2005-09-30

    Large-scale combustion tests with caking bituminous coal has stopped. This stoppage has come about due to limitations in current funding available to continue large scale research and development activities at Riley Power's Commercial Burner Test Facility (CBTF) of the PC Preheat technology. The CBTF was secured and decommissioned in the previous quarter; work this quarter work completed the securing the proper disposition of all PC Preheat experimental equipment at the PSCF and CBTF and completing negotiations with AES Westover (a power plant in Johnson City, New York) to accept 130 tons of residual PRB test coal in storage. The coal transport to Westover occurred at the end of August. GTI was granted a no-cost time extension through September 2005; immediate efforts are focused on completing a draft final report, which is due in October 31, 2005 and the final report in December.

  6. A PC based control system for the CERN ISOLDE separators

    International Nuclear Information System (INIS)

    Billinge, R.; Bret, A.; Deloose, I.; Pace, A.; Shering, G.

    1992-01-01

    The control system of the two isotope separators of CERN, named ISOLDE, is being completely redesigned with the goal of having a flexible, high performance and inexpensive system. A new architecture that makes heavy use of the commercial software and hardware available for the huge Personal Computer (PC) market is being implemented on the 1700 geographically distributed control channels of the separators. 8 MS-DOS TM i386-based PCs with about 80 acquisition/control boards are used to access the equipments while 3 other PCs running Microsoft Windows TM and Microsoft Excel TM are used as consoles, the whole through a Novell TM Local Area Network with a PC Disk Server used as a database. This paper describes the interesting solutions found and discusses the reduced programming work load and costs that are expected to build the system before the start of the separators in March 1992. (author)

  7. Radioimmunoassay data processing program for IBM PC computers

    International Nuclear Information System (INIS)

    1989-06-01

    The Medical Applications Section of the International Atomic Energy Agency (IAEA) has previously developed several programs for use on the Hewlett-Packard HP-41C programmable calculator to facilitate better quality control in radioimmunoassay through improved data processing. The program described in this document is designed for off-line analysis using an IBM PC (or compatible) for counting data from standards and unknown specimens (i.e. for analysis of counting data previously recorded by a counter), together with internal quality control (IQC) data both within and between batch. The greater computing power of the IBM PC has enabled the imprecision profile and IQC control curves which were unavailable on the HP-41C version. It is intended that the program would make available good data processing capability to laboratories having limited financial resources and serious problems of quality control. 3 refs

  8. Metal Detector By Using PIC Microcontroller Interfacing With PC

    Directory of Open Access Journals (Sweden)

    Yin Min Theint

    2015-06-01

    Full Text Available Abstract This system proposes metal detector by using PIC microcontroller interfacing with PC. The system uses PIC microcontroller as the main controller whether the detected metal is ferrous metal or non-ferrous metal. Among various types of metal sensors and various types of metal detecting technologies concentric type induction coil sensor and VLF very low frequency metal detecting technology are used in this system. This system consists of two configurations Hardware configuration and Software configuration. The hardware components include induction coil sensors which senses the frequency changes of metal a PIC microcontroller personal computer PC buzzer light emitting diode LED and webcam. The software configuration includes a program controller interface. PIC MikroCprogramming language is used to implement the control system. This control system is based on the PIC 16F887 microcontroller.This system is mainly used in mining and high security places such as airport plaza shopping mall and governmental buildings.

  9. A embedded Linux system based on PowerPC

    International Nuclear Information System (INIS)

    Ye Mei; Zhao Jingwei; Chu Yuanping

    2006-01-01

    The authors will introduce a Embedded Linux System based on PowerPC as well as the base method on how to establish the system. The goal of the system is to build a test system of VMEbus device. It also can be used to setup the small data acquisition and control system. Two types of compiler are provided by the developer system according to the features of the system and the Power PC. At the top of the article some typical embedded Operation system will be introduced and the features of different system will be provided. And then the method on how to build a embedded Linux system as well as the key technique will be discussed in detail. Finally a successful read-write example will be given based on the test system. (authors)

  10. EZVIDEO, DISSPLA Graphics Software Simulation on IBM PC

    International Nuclear Information System (INIS)

    1991-01-01

    1 - Description of program or function: EZVIDEO simulates a subset of the DISSPLA plotting package to make plots on the IBM PC screen. Screen dumps can also be made to an attached LaserJet or Epson printer to make hard copy without using terminal emulators. The forerunner of EZVIDEO was called EZPLOT. 2 - Method of solution: The subroutines in the EZVIDEO system are based on the Hewlett Packard HP 9000 simulation of DISSPLA. These routines manipulate the pen movements on the screen and are also capable of capturing these same movements so that a hardcopy can be made to dot matrix or laser printer. 3 - Restrictions on the complexity of the problem: For plotting on the IBM PC, the plotting emulator PCPLOT is needed

  11. Pocket PC-based portable gamma-ray spectrometer

    Directory of Open Access Journals (Sweden)

    Kamontip Ploykrachang

    2011-04-01

    Full Text Available A portable gamma-ray spectrometer based on a Pocket PC has been developed. A 12-bit pipeline analog-to-digitalconverter (ADC associated with an implemented pulse height histogram function on field programmable gate array (FPGAoperating at 15 MHz is employed for pulse height analysis from built-in pulse amplifier. The system, which interfaces withthe Pocket PC via an enhanced RS-232 serial port under the microcontroller facilitation, is utilized for spectrum acquisition,display and analysis. The pulse height analysis capability of the system was tested and it was found that the ADC integralnonlinearity of ±0.45% was obtained with the throughput rate at 160 kcps. The overall system performance was tested usinga PIN photodiode-CsI(Tl crystal coupled scintillation detector and gamma standard radioactive sources of Cs-137 andCo-60. Low cost and the compact system size as a result of the implemented logical function are also discussed.

  12. Tablet PC Enabled Body Sensor System for Rural Telehealth Applications

    Directory of Open Access Journals (Sweden)

    Nitha V. Panicker

    2016-01-01

    Full Text Available Telehealth systems benefit from the rapid growth of mobile communication technology for measuring physiological signals. Development and validation of a tablet PC enabled noninvasive body sensor system for rural telehealth application are discussed in this paper. This system includes real time continuous collection of physiological parameters (blood pressure, pulse rate, and temperature and fall detection of a patient with the help of a body sensor unit and wireless transmission of the acquired information to a tablet PC handled by the medical staff in a Primary Health Center (PHC. Abnormal conditions are automatically identified and alert messages are given to the medical officer in real time. Clinical validation is performed in a real environment and found to be successful. Bland-Altman analysis is carried out to validate the wrist blood pressure sensor used. The system works well for all measurements.

  13. Flexible missile autopilot design studies with PC-MATLAB/386

    Science.gov (United States)

    Ruth, Michael J.

    1989-01-01

    Development of a responsive, high-bandwidth missile autopilot for airframes which have structural modes of unusually low frequency presents a challenging design task. Such systems are viable candidates for modern, state-space control design methods. The PC-MATLAB interactive software package provides an environment well-suited to the development of candidate linear control laws for flexible missile autopilots. The strengths of MATLAB include: (1) exceptionally high speed (MATLAB's version for 80386-based PC's offers benchmarks approaching minicomputer and mainframe performance); (2) ability to handle large design models of several hundred degrees of freedom, if necessary; and (3) broad extensibility through user-defined functions. To characterize MATLAB capabilities, a simplified design example is presented. This involves interactive definition of an observer-based state-space compensator for a flexible missile autopilot design task. MATLAB capabilities and limitations, in the context of this design task, are then summarized.

  14. PC analysis of stochastic differential equations driven by Wiener noise

    KAUST Repository

    Le Maitre, Olivier

    2015-03-01

    A polynomial chaos (PC) analysis with stochastic expansion coefficients is proposed for stochastic differential equations driven by additive or multiplicative Wiener noise. It is shown that for this setting, a Galerkin formalism naturally leads to the definition of a hierarchy of stochastic differential equations governing the evolution of the PC modes. Under the mild assumption that the Wiener and uncertain parameters can be treated as independent random variables, it is also shown that the Galerkin formalism naturally separates parametric uncertainty and stochastic forcing dependences. This enables us to perform an orthogonal decomposition of the process variance, and consequently identify contributions arising from the uncertainty in parameters, the stochastic forcing, and a coupled term. Insight gained from this decomposition is illustrated in light of implementation to simplified linear and non-linear problems; the case of a stochastic bifurcation is also considered.

  15. Superoxide dismutase in radioresistant PC-3 human prostate carcinoma cells

    International Nuclear Information System (INIS)

    Prokopovic, J.; Adzic M; Niciforovic, A.; Vucic, V.; Zaric, B.; Radojcic, M. B.

    2006-01-01

    The molecular mechanism of gamma-ionizing radiation (IR) resistance of human prostate cancer cells PC-3 is not known. Since low-LET-IR effects are primarily achieved through generation of reactive oxygen species (ROS), IR-induced expression of ROS-metabolizing antioxidant enzymes, Mn- and CuZn-superoxide dismutase (Mn- and CuZnSOD) and catalase (CAT), and their upstream regulator transcription factor NFκB was followed. Significant elevation of both SODs was found in cells irradiated with 10- and 20 Gy, while CAT and NFκB expression was unchanged. Since, such conditions lead to accumulation of H 2 O 2 , it is concluded that radioresistance of PC-3 cells may emerge from positive feed-forward vicious circle established between H 2 O 2 activation of NFκB and elevated MnSOD activity. (author)

  16. Falling PC Solitaire Cards: An Open-Inquiry Approach

    Science.gov (United States)

    Gonzalez-Espada, Wilson J.

    2012-01-01

    Many of us have played the PC Solitaire game that comes as standard software in many computers. Although I am not a great player, occasionally I win a game or two. The game celebrates my accomplishment by pushing the cards forward, one at a time, falling gracefully in what appears to look like a parabolic path in a drag-free environment. One day,…

  17. Quantal release of ATP from clusters of PC12 cells.

    Science.gov (United States)

    Fabbro, Alessandra; Skorinkin, Andrei; Grandolfo, Micaela; Nistri, Andrea; Giniatullin, Rashid

    2004-10-15

    Although ATP is important for intercellular communication, little is known about the mechanism of endogenous ATP release due to a dearth of suitable models. Using PC12 cells known to express the P2X2 subtype of ATP receptors and to store ATP with catecholamines inside dense-core vesicles, we found that clusters of PC12 cells cultured for 3-7 days generated small transient inward currents (STICs) after an inward current elicited by exogenous ATP. The amplitude of STICs in individual cells correlated with the peak amplitude of ATP-induced currents. STICs appeared as asynchronous responses (approximately 20 pA average amplitude) for 1-20 s and were investigated with a combination of patch clamping, Ca2+ imaging, biochemistry and electron microscopy. Comparable STICs were produced by focal KCl pulses and were dependent on extracellular Ca2+. STICs were abolished by the P2X antagonist PPADS and potentiated by Zn2+, suggesting they were mediated by P2X2 receptor activation. The highest probability of observing STICs was after the peak of intracellular Ca2+ increase caused by KCl. Biochemical measurements indicated that KCl application induced a significant release of ATP from PC12 cells. Electron microscopy studies showed narrow clefts without 'synaptic-like' densities between clustered cells. Our data suggest that STICs were caused by quantal release of endogenous ATP by depolarized PC12 cells in close juxtaposition to the recorded cell. Thus, STICs may be a new experimental model to characterize the physiology of vesicular release of ATP and to study the kinetics and pharmacology of P2X2 receptor-mediated quantal currents.

  18. PCNuDAT a PC Nuclear Data program

    International Nuclear Information System (INIS)

    Kinsey, R.R.

    1998-01-01

    The PC program PCNuDat is described which displays nuclear radioactive decay data and thermal cross section data. It requires 45 Megabytes (reduced version of PCNuDat requires 3 Megabytes) of disc space and can be obtained through Internet FTP or WWW from U.S. Nuclear Data Center or Nuclear Data Section of the IAEA. It can be obtained also on CD-ROM upon request sent to Nuclear Data Section. (author)

  19. Practical Pocket PC Application w/Biometric Security

    Science.gov (United States)

    Logan, Julian

    2004-01-01

    I work in the Flight Software Engineering Branch, where we provide design and development of embedded real-time software applications for flight and supporting ground systems to support the NASA Aeronautics and Space Programs. In addition, this branch evaluates, develops and implements new technologies for embedded real-time systems, and maintains a laboratory for applications of embedded technology. The majority of microchips that are used in modern society have been programmed using embedded technology. These small chips can be found in microwaves, calculators, home security systems, cell phones and more. My assignment this summer entails working with an iPAQ HP 5500 Pocket PC. This top-of-the-line hand-held device is one of the first mobile PC's to introduce biometric security capabilities. Biometric security, in this case a fingerprint authentication system, is on the edge of technology as far as securing information. The benefits of fingerprint authentication are enormous. The most significant of them are that it is extremely difficult to reproduce someone else's fingerprint, and it is equally difficult to lose or forget your own fingerprint as opposed to a password or pin number. One of my goals for this summer is to integrate this technology with another Pocket PC application. The second task for the summer is to develop a simple application that provides an Astronaut EVA (Extravehicular Activity) Log Book capability. The Astronaut EVA Log Book is what an astronaut would use to report the status of field missions, crew physical health, successes, future plans, etc. My goal is to develop a user interface into which these data fields can be entered and stored. The applications that I am developing are created using eMbedded Visual C++ 4.0 with the Pocket PC 2003 Software Development Kit provided by Microsoft.

  20. Feasibility study of BES data processing and physics analysis on a PC/Linux platform

    International Nuclear Information System (INIS)

    Rong Gang; He Kanglin; Zhao Jiawei; Heng Yuekun; Zhang Chun

    1999-01-01

    The authors report a feasibility study of off-line BES data processing (data reconstruction and Detector simulation) on a PC/Linux platform and an application of the PC/Linux system in D/Ds physics analysis. The authors compared the results obtained from the PC/Linux with that from HP workstation. It shows that PC/Linux platform can do BES data offline analysis as good as UNIX workstation do, but it is much powerful and economical

  1. The fast code

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, L.N.; Wilson, R.E. [Oregon State Univ., Dept. of Mechanical Engineering, Corvallis, OR (United States)

    1996-09-01

    The FAST Code which is capable of determining structural loads on a flexible, teetering, horizontal axis wind turbine is described and comparisons of calculated loads with test data are given at two wind speeds for the ESI-80. The FAST Code models a two-bladed HAWT with degrees of freedom for blade bending, teeter, drive train flexibility, yaw, and windwise and crosswind tower motion. The code allows blade dimensions, stiffnesses, and weights to differ and models tower shadow, wind shear, and turbulence. Additionally, dynamic stall is included as are delta-3 and an underslung rotor. Load comparisons are made with ESI-80 test data in the form of power spectral density, rainflow counting, occurrence histograms, and azimuth averaged bin plots. It is concluded that agreement between the FAST Code and test results is good. (au)

  2. Fulcrum Network Codes

    DEFF Research Database (Denmark)

    2015-01-01

    Fulcrum network codes, which are a network coding framework, achieve three objectives: (i) to reduce the overhead per coded packet to almost 1 bit per source packet; (ii) to operate the network using only low field size operations at intermediate nodes, dramatically reducing complexity...... in the network; and (iii) to deliver an end-to-end performance that is close to that of a high field size network coding system for high-end receivers while simultaneously catering to low-end ones that can only decode in a lower field size. Sources may encode using a high field size expansion to increase...... the number of dimensions seen by the network using a linear mapping. Receivers can tradeoff computational effort with network delay, decoding in the high field size, the low field size, or a combination thereof....

  3. Code Disentanglement: Initial Plan

    Energy Technology Data Exchange (ETDEWEB)

    Wohlbier, John Greaton [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kelley, Timothy M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rockefeller, Gabriel M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Calef, Matthew Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-01-27

    The first step to making more ambitious changes in the EAP code base is to disentangle the code into a set of independent, levelized packages. We define a package as a collection of code, most often across a set of files, that provides a defined set of functionality; a package a) can be built and tested as an entity and b) fits within an overall levelization design. Each package contributes one or more libraries, or an application that uses the other libraries. A package set is levelized if the relationships between packages form a directed, acyclic graph and each package uses only packages at lower levels of the diagram (in Fortran this relationship is often describable by the use relationship between modules). Independent packages permit independent- and therefore parallel|development. The packages form separable units for the purposes of development and testing. This is a proven path for enabling finer-grained changes to a complex code.

  4. Coded Random Access

    DEFF Research Database (Denmark)

    Paolini, Enrico; Stefanovic, Cedomir; Liva, Gianluigi

    2015-01-01

    The rise of machine-to-machine communications has rekindled the interest in random access protocols as a support for a massive number of uncoordinatedly transmitting devices. The legacy ALOHA approach is developed under a collision model, where slots containing collided packets are considered...... as waste. However, if the common receiver (e.g., base station) is capable to store the collision slots and use them in a transmission recovery process based on successive interference cancellation, the design space for access protocols is radically expanded. We present the paradigm of coded random access......, in which the structure of the access protocol can be mapped to a structure of an erasure-correcting code defined on graph. This opens the possibility to use coding theory and tools for designing efficient random access protocols, offering markedly better performance than ALOHA. Several instances of coded...

  5. VT ZIP Code Areas

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) A ZIP Code Tabulation Area (ZCTA) is a statistical geographic entity that approximates the delivery area for a U.S. Postal Service five-digit...

  6. Induction technology optimization code

    International Nuclear Information System (INIS)

    Caporaso, G.J.; Brooks, A.L.; Kirbie, H.C.

    1992-01-01

    A code has been developed to evaluate relative costs of induction accelerator driver systems for relativistic klystrons. The code incorporates beam generation, transport and pulsed power system constraints to provide an integrated design tool. The code generates an injector/accelerator combination which satisfies the top level requirements and all system constraints once a small number of design choices have been specified (rise time of the injector voltage and aspect ratio of the ferrite induction cores, for example). The code calculates dimensions of accelerator mechanical assemblies and values of all electrical components. Cost factors for machined parts, raw materials and components are applied to yield a total system cost. These costs are then plotted as a function of the two design choices to enable selection of an optimum design based on various criteria. (Author) 11 refs., 3 figs

  7. Characterization of RNA interference in rat PC12 cells

    DEFF Research Database (Denmark)

    Thonberg, Håkan; Schéele, Camilla C; Dahlgren, Cecilia

    2004-01-01

    to achieve RNAi in a cultured rat neuronal cell line, PC12. Targeting of neuropeptide Y mRNA by synthetic siRNA results in knock down of the mRNA levels with an IC50 of approximately 0.1 nM. The mRNA knockdown lasts for at least 96 h and is not dependent on protein synthesis. Further, PC12 cells were ablated...... of the rat Golgi-ER protein 95 kDa (GERp95), an Argonaute family protein, by siRNA methodology. After GERp95-ablation, sequential knockdown of NPY by siRNA was shown to be impaired. Thus, we report that the GERp95 protein is functionally required for RNAi targeting NPY in rat PC12 cells.......Double-stranded RNA can initiate post transcriptional gene silencing in mammalian cell cultures via a mechanism known as RNA interference (RNAi). The sequence-specific degradation of homologous mRNA is triggered by 21-nucleotide RNA-duplexes termed short interfering RNA (siRNA). The homologous...

  8. The reactor physics computer programs in PC's era

    International Nuclear Information System (INIS)

    Nainer, O.; Serghiuta, D.

    1995-01-01

    The main objective of reactor physics analysis is the evaluation of flux and power distribution over the reactor core. For CANDU reactors sophisticated computer programs, such as FMDP and RFSP, were developed 20 years ago for mainframe computers. These programs were adapted to work on workstations with UNIX or DOS, but they lack a feature that could improve their use and that is 'user friendly'. For using these programs the users need to deal with a great amount of information contained in sophisticated files. To modify a model is a great challenge. First of all, it is necessary to bear in mind all the geometrical dimensions and accordingly, to modify the core model to match the new requirements. All this must be done in a line input file. For a DOS platform, using an average performance PC system, could it be possible: to represent and modify all the geometrical and physical parameters in a meaningful way, on screen, using an intuitive graphic user interface; to reduce the real time elapsed in order to perform complex fuel-management analysis 'at home'; to avoid the rewrite of the mainframe version of the program? The author's answer is a fuel-management computer package operating on PC, 3 time faster than on a CDC-Cyber 830 mainframe one (486DX/33MHz/8MbRAM) or 20 time faster (Pentium-PC), respectively. (author). 5 refs., 1 tab., 5 figs

  9. Virtual reality exposure therapy: 150-degree screen to desktop PC.

    Science.gov (United States)

    Tichon, Jennifer; Banks, Jasmine

    2006-08-01

    Virtual reality exposure therapy (VRET) developed using immersive or semi-immersive virtual environments present a usability problem for practitioners. To meet practitioner requirements for lower cost and portability VRET programs must often be ported onto desktop environments such as the personal computer (PC). However, success of VRET has been shown to be linked to presence, and the environment's ability to evoke the same reactions and emotions as a real experience. It is generally accepted that high-end virtual environments (VEs) are more immersive than desktop PCs, but level of immersion does not always predict level of presence. This paper reports on the impact on presence of porting a therapeutic VR application for schizophrenia from the initial research environment of a semi-immersive curved screen to PC. Presence in these two environments is measured both introspectively and across a number of causal factors thought to underlie the experience of presence. Results show that the VR exposure program successfully made users feel they were "present" in both platforms. While the desktop PC achieved higher scores on presence across causal factors participants reported they felt more present in the curved screen environment. While comparison of the two groups was statistically significant for the PQ but not for the IPQ, subjective reports of experiences in the environments should be considered in future research as the success of VRET relies heavily on the emotional response of patients to the therapeutic program.

  10. Tablet PC interaction with digital micromirror device (DMD)

    Science.gov (United States)

    Refai, Hakki H.; Dahshan, Mostafa H.; Sluss, James J., Jr.

    2007-02-01

    Digital light processing (DLP) is an innovative display technology that uses an optical switch array, known as a digital micromirror device (DMD), which allows digital control of light. To date, DMDs have been used primarily as high-speed spatial light modulators for projector applications. A tablet PC is a notebook or slate-shaped mobile PC. Its touch screen or digitizing tablet technology allows the user to operate the notebook with a stylus or digital pen instead of using a keyboard or mouse. In this paper, we describe an interface solution that translates any sketch on the tablet PC screen to an identical mirror-copy over the cross-section of the DMD micromirrors such that the image of the sketch can be projected onto a special screen. An algorithm has been created to control each single micromirror of the hundreds of thousands of micromirrors that cover the DMD surface. We demonstrate the successful application of a DMD to a high-speed two-dimensional (2D) scanning environment, acquiring the data from the tablet screen and launching its contents to the projection screen; with very high accuracy up to 13.68 μm x 13.68 μm of mirror pitch.

  11. Code de conduite

    International Development Research Centre (IDRC) Digital Library (Canada)

    irocca

    le respect de telles normes. Ce faisant, nous contribuons à la bonne réputation et à l'intégrité du Centre et allons dans le sens du Code de valeurs et d'éthique du secteur public du gouvernement du Canada. Je vous invite à prendre connaissance de cette nouvelle mouture du Code de conduite et à appliquer ses principes ...

  12. Towards advanced code simulators

    International Nuclear Information System (INIS)

    Scriven, A.H.

    1990-01-01

    The Central Electricity Generating Board (CEGB) uses advanced thermohydraulic codes extensively to support PWR safety analyses. A system has been developed to allow fully interactive execution of any code with graphical simulation of the operator desk and mimic display. The system operates in a virtual machine environment, with the thermohydraulic code executing in one virtual machine, communicating via interrupts with any number of other virtual machines each running other programs and graphics drivers. The driver code itself does not have to be modified from its normal batch form. Shortly following the release of RELAP5 MOD1 in IBM compatible form in 1983, this code was used as the driver for this system. When RELAP5 MOD2 became available, it was adopted with no changes needed in the basic system. Overall the system has been used for some 5 years for the analysis of LOBI tests, full scale plant studies and for simple what-if studies. For gaining rapid understanding of system dependencies it has proved invaluable. The graphical mimic system, being independent of the driver code, has also been used with other codes to study core rewetting, to replay results obtained from batch jobs on a CRAY2 computer system and to display suitably processed experimental results from the LOBI facility to aid interpretation. For the above work real-time execution was not necessary. Current work now centers on implementing the RELAP 5 code on a true parallel architecture machine. Marconi Simulation have been contracted to investigate the feasibility of using upwards of 100 processors, each capable of a peak of 30 MIPS to run a highly detailed RELAP5 model in real time, complete with specially written 3D core neutronics and balance of plant models. This paper describes the experience of using RELAP5 as an analyzer/simulator, and outlines the proposed methods and problems associated with parallel execution of RELAP5

  13. Aphasia for Morse code.

    Science.gov (United States)

    Wyler, A R; Ray, M W

    1986-03-01

    The ability to communicate by Morse code at high speed has, to our knowledge, not been localized within the cerebral cortex, but might be suspected as residing within the left (dominant) hemisphere. We report a case of a 54-year-old male who suffered a left temporal tip intracerebral hematoma and who temporarily lost his ability to communicate in Morse code, but who was minimally aphasic.

  14. Transplantation and application of RADTRAN 4.0 Code in China

    International Nuclear Information System (INIS)

    Wang Jiaming; Li Jikai; Li Shouping; Qian Zhong

    1994-01-01

    The authors present the work of transplanting RADTRAN 4.0 Code from a DEC VAX System to a MICRO VAX-II/VMS System and LX-386 SX PC in the Institute. Through repeated tests, running example cases and analyzing calculation results, it has been proved that the transplantation of the RADTRAN 4.0 Code is successful. The transplanted RADTRAN 4.0 has been taken in nuclear electricity software product library. At present, several institutions in China has started to use the Code

  15. PEAR code review

    International Nuclear Information System (INIS)

    De Wit, R.; Jamieson, T.; Lord, M.; Lafortune, J.F.

    1997-07-01

    As a necessary component in the continuous improvement and refinement of methodologies employed in the nuclear industry, regulatory agencies need to periodically evaluate these processes to improve confidence in results and ensure appropriate levels of safety are being achieved. The independent and objective review of industry-standard computer codes forms an essential part of this program. To this end, this work undertakes an in-depth review of the computer code PEAR (Public Exposures from Accidental Releases), developed by Atomic Energy of Canada Limited (AECL) to assess accidental releases from CANDU reactors. PEAR is based largely on the models contained in the Canadian Standards Association (CSA) N288.2-M91. This report presents the results of a detailed technical review of the PEAR code to identify any variations from the CSA standard and other supporting documentation, verify the source code, assess the quality of numerical models and results, and identify general strengths and weaknesses of the code. The version of the code employed in this review is the one which AECL intends to use for CANDU 9 safety analyses. (author)

  16. ANCON: A code for the evaluation of complex fault trees in personal computers

    International Nuclear Information System (INIS)

    Napoles, J.G.; Salomon, J.; Rivero, J.

    1990-01-01

    Performing probabilistic safety analysis has been recognized worldwide as one of the more effective ways for further enhancing safety of Nuclear Power Plants. The evaluation of fault trees plays a fundamental role in these analysis. Some existing limitations in RAM and execution speed of personal computers (PC) has restricted so far their use in the analysis of complex fault trees. Starting from new approaches in the data structure and other possibilities the ANCON code can evaluate complex fault trees in a PC, allowing the user to do a more comprehensive analysis of the considered system in reduced computing time

  17. Multi-satellite study of the excitation of Pc3 and Pc4-5 ULF waves and their penetration across the plasmapause during the 2003 Halloween superstorm

    Science.gov (United States)

    Balasis, G.; Daglis, I. A.; Mann, I. R.; Papadimitriou, C.; Zesta, E.; Georgiou, M.; Haagmans, R.; Tsinganos, K.

    2015-10-01

    We use multi-satellite and ground-based magnetic data to investigate the concurrent characteristics of Pc3 (22-100 mHz) and Pc4-5 (1-22 mHz) ultra-low-frequency (ULF) waves on the 31 October 2003 during the Halloween magnetic superstorm. ULF waves are seen in the Earth's magnetosphere, topside ionosphere, and Earth's surface, enabling an examination of their propagation characteristics. We employ a time-frequency analysis technique and examine data from when the Cluster and CHAMP spacecraft were in good local time (LT) conjunction near the dayside noon-midnight meridian. We find clear evidence of the excitation of both Pc3 and Pc4-5 waves, but more significantly we find a clear separation in the L shell of occurrence of the Pc4-5 and Pc3 waves in the equatorial inner magnetosphere, separated by the density gradients at the plasmapause boundary layer. A key finding of the wavelet spectral analysis of data collected from the Geotail, Cluster, and CHAMP spacecraft and the CARISMA and GIMA magnetometer networks was a remarkably clear transition of the waves' frequency into dominance in a higher-frequency regime within the Pc3 range. Analysis of the local field line resonance frequency suggests that the separation of the Pc4-5 and Pc3 emissions across the plasmapause is consistent with the structure of the inhomogeneous field line resonance Alfvén continuum. The Pc4-5 waves are consistent with direct excitation by the solar wind in the plasma trough, as well as Pc3 wave absorption in the plasmasphere following excitation by upstream waves originating at the bow shock in the local noon sector. However, despite good solar wind coverage, our study was not able to unambiguously identify a clear explanation for the sharp universal time (UT) onset of the discrete frequency and large-amplitude Pc3 wave power.

  18. Multi-satellite study of the excitation of Pc3 and Pc4-5 ULF waves and their penetration across the plasmapause during the 2003 Halloween superstorm

    Directory of Open Access Journals (Sweden)

    G. Balasis

    2015-10-01

    Full Text Available We use multi-satellite and ground-based magnetic data to investigate the concurrent characteristics of Pc3 (22–100 mHz and Pc4-5 (1–22 mHz ultra-low-frequency (ULF waves on the 31 October 2003 during the Halloween magnetic superstorm. ULF waves are seen in the Earth's magnetosphere, topside ionosphere, and Earth's surface, enabling an examination of their propagation characteristics. We employ a time–frequency analysis technique and examine data from when the Cluster and CHAMP spacecraft were in good local time (LT conjunction near the dayside noon–midnight meridian. We find clear evidence of the excitation of both Pc3 and Pc4-5 waves, but more significantly we find a clear separation in the L shell of occurrence of the Pc4-5 and Pc3 waves in the equatorial inner magnetosphere, separated by the density gradients at the plasmapause boundary layer. A key finding of the wavelet spectral analysis of data collected from the Geotail, Cluster, and CHAMP spacecraft and the CARISMA and GIMA magnetometer networks was a remarkably clear transition of the waves' frequency into dominance in a higher-frequency regime within the Pc3 range. Analysis of the local field line resonance frequency suggests that the separation of the Pc4-5 and Pc3 emissions across the plasmapause is consistent with the structure of the inhomogeneous field line resonance Alfvén continuum. The Pc4-5 waves are consistent with direct excitation by the solar wind in the plasma trough, as well as Pc3 wave absorption in the plasmasphere following excitation by upstream waves originating at the bow shock in the local noon sector. However, despite good solar wind coverage, our study was not able to unambiguously identify a clear explanation for the sharp universal time (UT onset of the discrete frequency and large-amplitude Pc3 wave power.

  19. Static and Dynamic Energetic Disorders in the C 60 , PC 61 BM, C 70 , and PC 71 BM Fullerenes

    KAUST Repository

    Tummala, Naga Rajesh

    2015-09-17

    We use a combination of molecular dynamics simulations and density functional theory calculations to investigate the energetic disorder in fullerene systems. We show that the energetic disorder evaluated from an ensemble average contains contributions of both static origin (time-independent, due to loose packing) and dynamic origin (time-dependent, due to electron-vibration interactions). In order to differentiate between these two contributions, we compare the results obtained from an ensemble average approach with those derived from a time average approach. It is found that in both amorphous C60 and C70 bulk systems, the degrees of static and dynamic disorder are comparable, while in the amorphous PC61BM and PC71BM systems, static disorder is about twice as large as dynamic disorder. © 2015 American Chemical Society.

  20. Rate-adaptive BCH codes for distributed source coding

    DEFF Research Database (Denmark)

    Salmistraro, Matteo; Larsen, Knud J.; Forchhammer, Søren

    2013-01-01

    This paper considers Bose-Chaudhuri-Hocquenghem (BCH) codes for distributed source coding. A feedback channel is employed to adapt the rate of the code during the decoding process. The focus is on codes with short block lengths for independently coding a binary source X and decoding it given its...... correlated side information Y. The proposed codes have been analyzed in a high-correlation scenario, where the marginal probability of each symbol, Xi in X, given Y is highly skewed (unbalanced). Rate-adaptive BCH codes are presented and applied to distributed source coding. Adaptive and fixed checking...

  1. PC-CIMACT. A near real time materials accountancy software package for use on an IBM or compatible PC

    International Nuclear Information System (INIS)

    Williams, D.E.; Gale, R.

    1990-03-01

    This report describes the 'PC-CIMACT' Near Real Time Materials Accountancy computer package. It has been derived from 'CIMACT', which is in daily use at the UKAEA's Dounreay Nuclear Power Establishment. The scope of the package is presented, together with the statistical analyses it encompasses. Several of the analyses are illustrated by the treatment of data from a simulated reprocessing campaign. A user guide providing detailed instructions is also included. (author)

  2. Polynomial weights and code constructions

    DEFF Research Database (Denmark)

    Massey, J; Costello, D; Justesen, Jørn

    1973-01-01

    polynomial included. This fundamental property is then used as the key to a variety of code constructions including 1) a simplified derivation of the binary Reed-Muller codes and, for any primepgreater than 2, a new extensive class ofp-ary "Reed-Muller codes," 2) a new class of "repeated-root" cyclic codes...... that are subcodes of the binary Reed-Muller codes and can be very simply instrumented, 3) a new class of constacyclic codes that are subcodes of thep-ary "Reed-Muller codes," 4) two new classes of binary convolutional codes with large "free distance" derived from known binary cyclic codes, 5) two new classes...... of long constraint length binary convolutional codes derived from2^r-ary Reed-Solomon codes, and 6) a new class ofq-ary "repeated-root" constacyclic codes with an algebraic decoding algorithm....

  3. A novel homozygous no-stop mutation in G6PC gene from a Chinese patient with glycogen storage disease type Ia.

    Science.gov (United States)

    Gu, Lei-Lei; Li, Xin-Hua; Han, Yue; Zhang, Dong-Hua; Gong, Qi-Ming; Zhang, Xin-Xin

    2014-02-25

    Glycogen storage disease type Ia (GSD-Ia) is an autosomal recessive genetic disorder resulting in hypoglycemia, hepatomegaly and growth retardation. It is caused by mutations in the G6PC gene encoding Glucose-6-phosphatase. To date, over 80 mutations have been identified in the G6PC gene. Here we reported a novel mutation found in a Chinese patient with abnormal transaminases, hypoglycemia, hepatomegaly and short stature. Direct sequencing of the coding region and splicing-sites in the G6PC gene revealed a novel no-stop mutation, p.*358Yext*43, leading to a 43 amino-acid extension of G6Pase. The expression level of mutant G6Pase transcripts was only 7.8% relative to wild-type transcripts. This mutation was not found in 120 chromosomes from 60 unrelated healthy control subjects using direct sequencing, and was further confirmed by digestion with Rsa I restriction endonuclease. In conclusion, we revealed a novel no-stop mutation in this study which expands the spectrum of mutations in the G6PC gene. The molecular genetic analysis was indispensable to the diagnosis of GSD-Ia for the patient. Copyright © 2013 Elsevier B.V. All rights reserved.

  4. SPECTRAL AMPLITUDE CODING OCDMA SYSTEMS USING ENHANCED DOUBLE WEIGHT CODE

    Directory of Open Access Journals (Sweden)

    F.N. HASOON

    2006-12-01

    Full Text Available A new code structure for spectral amplitude coding optical code division multiple access systems based on double weight (DW code families is proposed. The DW has a fixed weight of two. Enhanced double-weight (EDW code is another variation of a DW code family that can has a variable weight greater than one. The EDW code possesses ideal cross-correlation properties and exists for every natural number n. A much better performance can be provided by using the EDW code compared to the existing code such as Hadamard and Modified Frequency-Hopping (MFH codes. It has been observed that theoretical analysis and simulation for EDW is much better performance compared to Hadamard and Modified Frequency-Hopping (MFH codes.

  5. Some new ternary linear codes

    Directory of Open Access Journals (Sweden)

    Rumen Daskalov

    2017-07-01

    Full Text Available Let an $[n,k,d]_q$ code be a linear code of length $n$, dimension $k$ and minimum Hamming distance $d$ over $GF(q$. One of the most important problems in coding theory is to construct codes with optimal minimum distances. In this paper 22 new ternary linear codes are presented. Two of them are optimal. All new codes improve the respective lower bounds in [11].

  6. Troubleshooting and Maintaining Your PC All-in-One Desk Reference For Dummies

    CERN Document Server

    Gookin, Dan

    2009-01-01

    Maintaining a PC is important, and troubleshooting a PC can be a challenge. Dan Gookin is great at explaining how to handle common PC problems, and he's provided a complete, plain-English manual in Troubleshooting & Maintaining Your PC All-in-One For Dummies. Liberally laced with Dan's famous humor and clear instructions, Troubleshooting & Maintaining Your PC All-in-One For Dummies is divided into six minibooks covering hardware, software, laptops, Internet, networking, and maintenance. Each one gives you some background on what causes common problems, to help you understand what's wrong as we

  7. ACE - Manufacturer Identification Code (MID)

    Data.gov (United States)

    Department of Homeland Security — The ACE Manufacturer Identification Code (MID) application is used to track and control identifications codes for manufacturers. A manufacturer is identified on an...

  8. Algebraic and stochastic coding theory

    CERN Document Server

    Kythe, Dave K

    2012-01-01

    Using a simple yet rigorous approach, Algebraic and Stochastic Coding Theory makes the subject of coding theory easy to understand for readers with a thorough knowledge of digital arithmetic, Boolean and modern algebra, and probability theory. It explains the underlying principles of coding theory and offers a clear, detailed description of each code. More advanced readers will appreciate its coverage of recent developments in coding theory and stochastic processes. After a brief review of coding history and Boolean algebra, the book introduces linear codes, including Hamming and Golay codes.

  9. Optical coding theory with Prime

    CERN Document Server

    Kwong, Wing C

    2013-01-01

    Although several books cover the coding theory of wireless communications and the hardware technologies and coding techniques of optical CDMA, no book has been specifically dedicated to optical coding theory-until now. Written by renowned authorities in the field, Optical Coding Theory with Prime gathers together in one volume the fundamentals and developments of optical coding theory, with a focus on families of prime codes, supplemented with several families of non-prime codes. The book also explores potential applications to coding-based optical systems and networks. Learn How to Construct

  10. Speech coding code- excited linear prediction

    CERN Document Server

    Bäckström, Tom

    2017-01-01

    This book provides scientific understanding of the most central techniques used in speech coding both for advanced students as well as professionals with a background in speech audio and or digital signal processing. It provides a clear connection between the whys hows and whats thus enabling a clear view of the necessity purpose and solutions provided by various tools as well as their strengths and weaknesses in each respect Equivalently this book sheds light on the following perspectives for each technology presented Objective What do we want to achieve and especially why is this goal important Resource Information What information is available and how can it be useful and Resource Platform What kind of platforms are we working with and what are their capabilities restrictions This includes computational memory and acoustic properties and the transmission capacity of devices used. The book goes on to address Solutions Which solutions have been proposed and how can they be used to reach the stated goals and ...

  11. Nasal associated lymphoid tissue of the Syrian golden hamster expresses high levels of PrPC.

    Directory of Open Access Journals (Sweden)

    Melissa D Clouse

    Full Text Available The key event in the pathogenesis of the transmissible spongiform encephalopathies is a template-dependent misfolding event where an infectious isoform of the prion protein (PrPSc comes into contact with native prion protein (PrPC and changes its conformation to PrPSc. In many extraneurally inoculated models of prion disease this PrPC misfolding event occurs in lymphoid tissues prior to neuroinvasion. The primary objective of this study was to compare levels of total PrPC in hamster lymphoid tissues involved in the early pathogenesis of prion disease. Lymphoid tissues were collected from golden Syrian hamsters and Western blot analysis was performed to quantify PrPC levels. PrPC immunohistochemistry (IHC of paraffin embedded tissue sections was performed to identify PrPC distribution in tissues of the lymphoreticular system. Nasal associated lymphoid tissue contained the highest amount of total PrPC followed by Peyer's patches, mesenteric and submandibular lymph nodes, and spleen. The relative levels of PrPC expression in IHC processed tissue correlated strongly with the Western blot data, with high levels of PrPC corresponding with a higher percentage of PrPC positive B cell follicles. High levels of PrPC in lymphoid tissues closely associated with the nasal cavity could contribute to the relative increased efficiency of the nasal route of entry of prions, compared to other routes of infection.

  12. Nasal associated lymphoid tissue of the Syrian golden hamster expresses high levels of PrPC.

    Science.gov (United States)

    Clouse, Melissa D; Shikiya, Ronald A; Bartz, Jason C; Kincaid, Anthony E

    2015-01-01

    The key event in the pathogenesis of the transmissible spongiform encephalopathies is a template-dependent misfolding event where an infectious isoform of the prion protein (PrPSc) comes into contact with native prion protein (PrPC) and changes its conformation to PrPSc. In many extraneurally inoculated models of prion disease this PrPC misfolding event occurs in lymphoid tissues prior to neuroinvasion. The primary objective of this study was to compare levels of total PrPC in hamster lymphoid tissues involved in the early pathogenesis of prion disease. Lymphoid tissues were collected from golden Syrian hamsters and Western blot analysis was performed to quantify PrPC levels. PrPC immunohistochemistry (IHC) of paraffin embedded tissue sections was performed to identify PrPC distribution in tissues of the lymphoreticular system. Nasal associated lymphoid tissue contained the highest amount of total PrPC followed by Peyer's patches, mesenteric and submandibular lymph nodes, and spleen. The relative levels of PrPC expression in IHC processed tissue correlated strongly with the Western blot data, with high levels of PrPC corresponding with a higher percentage of PrPC positive B cell follicles. High levels of PrPC in lymphoid tissues closely associated with the nasal cavity could contribute to the relative increased efficiency of the nasal route of entry of prions, compared to other routes of infection.

  13. Binding to and photo-oxidation of cardiolipin by the phthalocyanine photosensitizer Pc 4

    Science.gov (United States)

    Rodriguez, Myriam E.; Kim, Junhwan; Delos Santos, Grace B.; Azizuddin, Kashif; Berlin, Jeffrey; Anderson, Vernon E.; Kenney, Malcolm E.; Oleinick, Nancy L.

    2010-01-01

    Cardiolipin is a unique phospholipid of the mitochondrial inner membrane. Its peroxidation correlates with release of cytochrome c and induction of apoptosis. The phthalocyanine photosensitizer Pc 4 binds preferentially to the mitochondria and endoplasmic reticulum. Earlier Förster resonance energy transfer studies showed colocalization of Pc 4 and cardiolipin, which suggests cardiolipin as a target of photodynamic therapy (PDT) with Pc 4. Using liposomes as membrane models, we find that Pc 4 binds to cardiolipin-containing liposomes similarly to those that do not contain cardiolipin. Pc 4 binding is also studied in MCF-7c3 cells and those whose cardiolipin content was reduced by treatment with palmitate. Decreased levels of cardiolipin are quantified by thin-layer chromatography. The similar level of binding of Pc 4 to cells, irrespective of palmitate treatment, supports the lack of specificity of Pc 4 binding. Thus, factors other than cardiolipin are likely responsible for the preferential localization of Pc 4 in mitochondria. Nonetheless, cardiolipin within liposomes is readily oxidized by Pc 4 and light, yielding apparently mono- and dihydroperoxidized cardiolipin. If similar products result from exposure of cells to Pc 4-PDT, they could be part of the early events leading to apoptosis following Pc 4-PDT. PMID:21054078

  14. Dielectric and Energy Storage Properties of the Heterogeneous P(VDF-HFP)/PC Composite Films

    Science.gov (United States)

    Zhao, Xiaojia; Peng, Guirong; Zhan, Zaiji

    2017-12-01

    Polymer-based materials with a high discharge energy and low energy loss have attracted considerable attention for energy storage applications. A new class of polymer-based composite films composed of amorphous polycarbonate (PC) and poly(vinylidene fluoride-hexafluoropropylene) [P(VDF-HFP)] has been fabricated by simply solution blending followed by thermal treatment under vacuum. The results show that the diameter of the spherical phase for PC and the melting temperature of P(VDF-HFP) increase, and the crystallinity and crystallization temperature of P(VDF-HFP) decrease with increasing PC content. The phase transition from the polar β phase to weak polarity γ phase is induced by PC addition. Moreover, the Curie temperature of the P(VDF-HFP)/PC composite films shifts to a lower temperature. With the addition of PC, the permittivity, polarization and discharge energy of the P(VDF-HFP)/PC composite films slightly decrease. However, the energy loss is significantly reduced.

  15. Effect of neuronal PC12 cells on the functional properties of intestinal epithelial Caco-2 cells.

    Science.gov (United States)

    Satsu, Hideo; Yokoyama, Tatsuya; Ogawa, Nobumasa; Fujiwara-Hatano, Yoko; Shimizu, Makoto

    2003-06-01

    The effect of neuronal cells on the functional properties of intestinal epithelial cells was examined by using an in vitro coculture system. Two cell lines, Caco-2 and PC12, were respectively used as intestinal epithelial and enteric neuronal cell models. Coculture of differentiated Caco-2 cells with PC12 caused a significant decrease in the transepithelial electrical resistance (TER) value of the Caco-2 monolayer. The permeability to lucifer yellow (LY) was also significantly increased, suggesting that the tight junction (TJ) of the Caco-2 monolayers was modulated by coculturing with PC12. To identify the TJ-modulating factor presumably secreted from PC12, the effects of the major neurotransmitters on the TER value and LY transport were examined, but no influence was apparent. The TJ-modulating effect of PC12 was prevented by exposing PC12 to cycloheximide, suggesting that new protein synthesis in PC12 was necessary for this regulation.

  16. Spatially coded backscatter radiography

    International Nuclear Information System (INIS)

    Thangavelu, S.; Hussein, E.M.A.

    2007-01-01

    Conventional radiography requires access to two opposite sides of an object, which makes it unsuitable for the inspection of extended and/or thick structures (airframes, bridges, floors etc.). Backscatter imaging can overcome this problem, but the indications obtained are difficult to interpret. This paper applies the coded aperture technique to gamma-ray backscatter-radiography in order to enhance the detectability of flaws. This spatial coding method involves the positioning of a mask with closed and open holes to selectively permit or block the passage of radiation. The obtained coded-aperture indications are then mathematically decoded to detect the presence of anomalies. Indications obtained from Monte Carlo calculations were utilized in this work to simulate radiation scattering measurements. These simulated measurements were used to investigate the applicability of this technique to the detection of flaws by backscatter radiography

  17. Aztheca Code; Codigo Aztheca

    Energy Technology Data Exchange (ETDEWEB)

    Quezada G, S.; Espinosa P, G. [Universidad Autonoma Metropolitana, Unidad Iztapalapa, San Rafael Atlixco No. 186, Col. Vicentina, 09340 Ciudad de Mexico (Mexico); Centeno P, J.; Sanchez M, H., E-mail: sequga@gmail.com [UNAM, Facultad de Ingenieria, Ciudad Universitaria, Circuito Exterior s/n, 04510 Ciudad de Mexico (Mexico)

    2017-09-15

    This paper presents the Aztheca code, which is formed by the mathematical models of neutron kinetics, power generation, heat transfer, core thermo-hydraulics, recirculation systems, dynamic pressure and level models and control system. The Aztheca code is validated with plant data, as well as with predictions from the manufacturer when the reactor operates in a stationary state. On the other hand, to demonstrate that the model is applicable during a transient, an event occurred in a nuclear power plant with a BWR reactor is selected. The plant data are compared with the results obtained with RELAP-5 and the Aztheca model. The results show that both RELAP-5 and the Aztheca code have the ability to adequately predict the behavior of the reactor. (Author)

  18. Code query by example

    Science.gov (United States)

    Vaucouleur, Sebastien

    2011-02-01

    We introduce code query by example for customisation of evolvable software products in general and of enterprise resource planning systems (ERPs) in particular. The concept is based on an initial empirical study on practices around ERP systems. We motivate our design choices based on those empirical results, and we show how the proposed solution helps with respect to the infamous upgrade problem: the conflict between the need for customisation and the need for upgrade of ERP systems. We further show how code query by example can be used as a form of lightweight static analysis, to detect automatically potential defects in large software products. Code query by example as a form of lightweight static analysis is particularly interesting in the context of ERP systems: it is often the case that programmers working in this field are not computer science specialists but more of domain experts. Hence, they require a simple language to express custom rules.

  19. Coded Splitting Tree Protocols

    DEFF Research Database (Denmark)

    Sørensen, Jesper Hemming; Stefanovic, Cedomir; Popovski, Petar

    2013-01-01

    This paper presents a novel approach to multiple access control called coded splitting tree protocol. The approach builds on the known tree splitting protocols, code structure and successive interference cancellation (SIC). Several instances of the tree splitting protocol are initiated, each...... instance is terminated prematurely and subsequently iterated. The combined set of leaves from all the tree instances can then be viewed as a graph code, which is decodable using belief propagation. The main design problem is determining the order of splitting, which enables successful decoding as early...... as possible. Evaluations show that the proposed protocol provides considerable gains over the standard tree splitting protocol applying SIC. The improvement comes at the expense of an increased feedback and receiver complexity....

  20. Revised SRAC code system

    International Nuclear Information System (INIS)

    Tsuchihashi, Keichiro; Ishiguro, Yukio; Kaneko, Kunio; Ido, Masaru.

    1986-09-01

    Since the publication of JAERI-1285 in 1983 for the preliminary version of the SRAC code system, a number of additions and modifications to the functions have been made to establish an overall neutronics code system. Major points are (1) addition of JENDL-2 version of data library, (2) a direct treatment of doubly heterogeneous effect on resonance absorption, (3) a generalized Dancoff factor, (4) a cell calculation based on the fixed boundary source problem, (5) the corresponding edit required for experimental analysis and reactor design, (6) a perturbation theory calculation for reactivity change, (7) an auxiliary code for core burnup and fuel management, etc. This report is a revision of the users manual which consists of the general description, input data requirements and their explanation, detailed information on usage, mathematics, contents of libraries and sample I/O. (author)

  1. Graph Codes with Reed-Solomon Component Codes

    DEFF Research Database (Denmark)

    Høholdt, Tom; Justesen, Jørn

    2006-01-01

    We treat a specific case of codes based on bipartite expander graphs coming from finite geometries. The code symbols are associated with the branches and the symbols connected to a given node are restricted to be codewords in a Reed-Solomon code. We give results on the parameters of the codes...

  2. Visualizing code and coverage changes for code review

    NARCIS (Netherlands)

    Oosterwaal, Sebastiaan; van Deursen, A.; De Souza Coelho, R.; Sawant, A.A.; Bacchelli, A.

    2016-01-01

    One of the tasks of reviewers is to verify that code modifications are well tested. However, current tools offer little support in understanding precisely how changes to the code relate to changes to the tests. In particular, it is hard to see whether (modified) test code covers the changed code.

  3. Principles of speech coding

    CERN Document Server

    Ogunfunmi, Tokunbo

    2010-01-01

    It is becoming increasingly apparent that all forms of communication-including voice-will be transmitted through packet-switched networks based on the Internet Protocol (IP). Therefore, the design of modern devices that rely on speech interfaces, such as cell phones and PDAs, requires a complete and up-to-date understanding of the basics of speech coding. Outlines key signal processing algorithms used to mitigate impairments to speech quality in VoIP networksOffering a detailed yet easily accessible introduction to the field, Principles of Speech Coding provides an in-depth examination of the

  4. Scrum Code Camps

    DEFF Research Database (Denmark)

    Pries-Heje, Jan; Pries-Heje, Lene; Dahlgaard, Bente

    2013-01-01

    A classic way to choose a supplier is through a bidding process where tenders from competing companies are evaluated in relation to the customer’s requirements. If the customer wants to hire an agile software developing team instead of buying a software product, a new approach for comparing tenders...... is required. In this paper we present the design of such a new approach, the Scrum Code Camp, which can be used to assess agile team capability in a transparent and consistent way. A design science research approach is used to analyze properties of two instances of the Scrum Code Camp where seven agile teams...

  5. Supervised Convolutional Sparse Coding

    KAUST Repository

    Affara, Lama Ahmed

    2018-04-08

    Convolutional Sparse Coding (CSC) is a well-established image representation model especially suited for image restoration tasks. In this work, we extend the applicability of this model by proposing a supervised approach to convolutional sparse coding, which aims at learning discriminative dictionaries instead of purely reconstructive ones. We incorporate a supervised regularization term into the traditional unsupervised CSC objective to encourage the final dictionary elements to be discriminative. Experimental results show that using supervised convolutional learning results in two key advantages. First, we learn more semantically relevant filters in the dictionary and second, we achieve improved image reconstruction on unseen data.

  6. CONCEPT computer code

    International Nuclear Information System (INIS)

    Delene, J.

    1984-01-01

    CONCEPT is a computer code that will provide conceptual capital investment cost estimates for nuclear and coal-fired power plants. The code can develop an estimate for construction at any point in time. Any unit size within the range of about 400 to 1300 MW electric may be selected. Any of 23 reference site locations across the United States and Canada may be selected. PWR, BWR, and coal-fired plants burning high-sulfur and low-sulfur coal can be estimated. Multiple-unit plants can be estimated. Costs due to escalation/inflation and interest during construction are calculated

  7. Hydralazine rescues PC12 cells from acrolein-mediated death.

    Science.gov (United States)

    Liu-Snyder, Peishan; Borgens, Richard Ben; Shi, Riyi

    2006-07-01

    Acrolein, a major lipid peroxidation product, has been associated with both CNS trauma and neurodegenerative diseases. Because of its long half-life, acrolein is a potent endogenous toxin capable of killing healthy cells during the secondary injury process. Traditionally, attempts to intervene in the process of progressive cell death after the primary injury have included scavenging reactive oxygen species (so-called free radicals). The animal data supporting such an approach have generally been positive, but all human clinical trials attempting a similar outcome in human CNS injury have failed. New drugs that might reduce toxicity by scavenging the products of lipid peroxidation present a promising, and little investigated, therapeutic approach. Hydralazine, a well-known treatment for hypertension, has been reported to react with acrolein, forming hydrazone in cell-free systems. In the companion paper, we have established an acrolein-mediated cell injury model using PC12 cells in vitro. Here we test the hypothesis that the formation of hydrazone adducts with acrolein is able to reduce acrolein toxicity and spare a significant percentage of the population of PC12 cells from death. Concentrations of approximately 1 mM of this aldehyde scavenger can rescue over 80% of the population of PC12 cells. This study provides a basis for a new pharmacological treatment to reduce the effects of secondary injury in the damaged and/or diseased nervous system. In particular, we describe the need for new drugs that possess aldehyde scavenging properties but do not interfere with the regulation of blood pressure. Copyright 2006 Wiley-Liss, Inc.

  8. FLUID- THERMODYNAMIC AND TRANSPORT PROPERTIES OF FLUIDS (IBM PC VERSION)

    Science.gov (United States)

    Fessler, T. E.

    1994-01-01

    The accurate computation of the thermodynamic and transport properties of fluids is a necessity for many engineering calculations. The FLUID program was developed to calculate the thermodynamic and transport properties of pure fluids in both the liquid and gas phases. Fluid properties are calculated using a simple gas model, empirical corrections, and an efficient numerical interpolation scheme. FLUID produces results that are in very good agreement with measured values, while being much faster than older more complex programs developed for the same purpose. A Van der Waals equation of state model is used to obtain approximate state values. These values are corrected for real-gas effects by model correction factors obtained from tables based on experimental data. These tables also accurately compensate for the special circumstances which arise whenever phase conditions occur. Viscosity and thermal conductivity values are computed directly from tables. Interpolation within tables is based on Lagrange's three point formula. A set of tables must be generated for each fluid implemented. FLUID currently contains tables for nine fluids including dry air and steam. The user can add tables for any fluid for which adequate thermal property data is available. The FLUID routine is structured so that it may easily be incorporated into engineering programs. The IBM 360 version of FLUID was developed in 1977. It is written in FORTRAN IV and has been implemented on an IBM 360 with a central memory requirement of approximately 222K of 8 bit bytes. The IBM PC version of FLUID is written in Microsoft FORTRAN 77 and has been implemented on an IBM PC with a memory requirement of 128K of 8 bit bytes. The IBM PC version of FLUID was developed in 1986.

  9. Functional Analysis of Mouse G6pc1 Mutations Using a Novel In Situ Assay for Glucose-6-Phosphatase Activity and the Effect of Mutations in Conserved Human G6PC1/G6PC2 Amino Acids on G6PC2 Protein Expression.

    Directory of Open Access Journals (Sweden)

    Kayla A Boortz

    Full Text Available Elevated fasting blood glucose (FBG has been associated with increased risk for development of type 2 diabetes. Single nucleotide polymorphisms (SNPs in G6PC2 are the most important common determinants of variations in FBG in humans. Studies using G6pc2 knockout mice suggest that G6pc2 regulates the glucose sensitivity of insulin secretion. G6PC2 and the related G6PC1 and G6PC3 genes encode glucose-6-phosphatase catalytic subunits. This study describes a functional analysis of 22 non-synonymous G6PC2 SNPs, that alter amino acids that are conserved in human G6PC1, mouse G6pc1 and mouse G6pc2, with the goal of identifying variants that potentially affect G6PC2 activity/expression. Published data suggest strong conservation of catalytically important amino acids between all four proteins and the related G6PC3 isoform. Because human G6PC2 has very low glucose-6-phosphatase activity we used an indirect approach, examining the effect of these SNPs on mouse G6pc1 activity. Using a novel in situ functional assay for glucose-6-phosphatase activity we demonstrate that the amino acid changes associated with the human G6PC2 rs144254880 (Arg79Gln, rs149663725 (Gly114Arg and rs2232326 (Ser324Pro SNPs reduce mouse G6pc1 enzyme activity without affecting protein expression. The Arg79Gln variant alters an amino acid mutation of which, in G6PC1, has previously been shown to cause glycogen storage disease type 1a. We also demonstrate that the rs368382511 (Gly8Glu, rs138726309 (His177Tyr, rs2232323 (Tyr207Ser rs374055555 (Arg293Trp, rs2232326 (Ser324Pro, rs137857125 (Pro313Leu and rs2232327 (Pro340Leu SNPs confer decreased G6PC2 protein expression. In summary, these studies identify multiple G6PC2 variants that have the potential to be associated with altered FBG in humans.

  10. Group Contribution sPC-SAFT Equation of State

    DEFF Research Database (Denmark)

    Tihic, Amra

    2008-01-01

    muligt at frembringe eksperimentelle data til at fitte parametrene. Dette projekt har ført til udvikling af en gruppebidragsbaseret (GC) udgave af sPC-SAFT tilstandsligningen, hvor modelparametrene beregnes ud fra flere niveauer af veldefinerede funktionelle grupper og deres individuelle bidrag. Metoden...... meget forskelligartet eksperimentelt datagrundlag indsamlet fra litteraturen; heriblandt gas-væske (VLE) og væske-væske (LLE) ligevægtsdata for industrirelevante systemer indeholdende biodiesel komponenter, PAH, thioler, phytokemikalier og polymere. Den udviklede gruppebidragsmetode til beregning af...

  11. Performance Evaluation of a Multipurpose Bare PC Gateway

    DEFF Research Database (Denmark)

    Tsetse, Anthony; Appiah-Kubi, Patrick; Loukili, Alae

    2015-01-01

    Internet usage keeps growing daily with global internet traffic expected to quadruple by the end of 2015. This is as mainly due to increasing number of devices connecting to the internet and making data exchange much easier. This growth has impacted the current Internet Protocol version 4 being u...... results indicate a relatively better performance (18%-45%) of the Bare PC gateway compared to a Linux gateway (running the functionalities as standalone systems). We believe the proposed solution could easily scale to wide area networks and also provide a cost efficient solution...

  12. PC interfacing using Centronics, RS232 and game ports

    CERN Document Server

    An, Pei

    1998-01-01

    The main links with your PC and the outside world are the centronic port, used for connecting the printer, the RS232 port, used for the mouse, and the games port for a joystick. This book explores how these input/output (I/O) ports can be put to use through a range of other interfacing applications. This is especially useful for laptop and palmtop PCs which cannot be fitted with internal I/O cards. A novel approach is taken by this book, combining the hardware through which the ports can be explored, and the software programming needed to carry out a range of experiments.Circuits are p

  13. An inexpensive PC-based ion linac control system

    International Nuclear Information System (INIS)

    Hamm, M.E.; Potter, J.M.

    1991-01-01

    A turn-key PC-based control system has been developed for the AccSys line of compact ion linear accelerators and rf power amplifiers. The control interface is based on the DZERO Rack Monitor Module, developed at Fermi National Accelerator Laboratory, communicating with a Ballard Technology MIL-STD-1553B controller board in a 286 or 386 personal computer. This cost effective and easy to operate control system features real-time control and monitoring of the linac/rf amplifier and can be customized for automatic start-up and unattended operation

  14. On the Packet Delay Characteristics for Serially-Connected Links using Random Linear Network Coding with and without Recoding

    DEFF Research Database (Denmark)

    Tömösközi, Máté; Fitzek, Frank; Roetter, Daniel Enrique Lucani

    2015-01-01

    decoding of the packets on the receiver side while playing out the video recording contained in the payload. Our solutions are implemented and evaluated on serially connected Raspberry Pi devices and a network (de)coding enabled software running on a regular PC. We find that the recoding relays work...

  15. Decoding Codes on Graphs

    Indian Academy of Sciences (India)

    lowing function is maximized,. This kind of decoding strategy is called the maximum a posteriori probability (MAP) decoding strategy as it attempts to estimate each symbol of the codeword that ..... gate the effects of packet loss over digital networks. Un- doubtedly other applications will use these codes in the years to come.

  16. New code of conduct

    CERN Multimedia

    Laëtitia Pedroso

    2010-01-01

    During his talk to the staff at the beginning of the year, the Director-General mentioned that a new code of conduct was being drawn up. What exactly is it and what is its purpose? Anne-Sylvie Catherin, Head of the Human Resources (HR) Department, talked to us about the whys and wherefores of the project.   Drawing by Georges Boixader from the cartoon strip “The World of Particles” by Brian Southworth. A code of conduct is a general framework laying down the behaviour expected of all members of an organisation's personnel. “CERN is one of the very few international organisations that don’t yet have one", explains Anne-Sylvie Catherin. “We have been thinking about introducing a code of conduct for a long time but lacked the necessary resources until now”. The call for a code of conduct has come from different sources within the Laboratory. “The Equal Opportunities Advisory Panel (read also the "Equal opportuni...

  17. CERN Code of Conduct

    CERN Document Server

    Department, HR

    2010-01-01

    The Code is intended as a guide in helping us, as CERN contributors, to understand how to conduct ourselves, treat others and expect to be treated. It is based around the five core values of the Organization. We should all become familiar with it and try to incorporate it into our daily life at CERN.

  18. Error Correcting Codes

    Indian Academy of Sciences (India)

    focused pictures of Triton, Neptune's largest moon. This great feat was in no small measure due to the fact that the sophisticated communication system on Voyager had an elaborate error correcting scheme built into it. At Jupiter and Saturn, a convolutional code was used to enhance the reliability of transmission, and at ...

  19. Nuclear safety code study

    Energy Technology Data Exchange (ETDEWEB)

    Hu, H.H.; Ford, D.; Le, H.; Park, S.; Cooke, K.L.; Bleakney, T.; Spanier, J.; Wilburn, N.P.; O' Reilly, B.; Carmichael, B.

    1981-01-01

    The objective is to analyze an overpower accident in an LMFBR. A simplified model of the primary coolant loop was developed in order to understand the instabilities encountered with the MELT III and SAS codes. The computer programs were translated for switching to the IBM 4331. Numerical methods were investigated for solving the neutron kinetics equations; the Adams and Gear methods were compared. (DLC)

  20. Student Dress Codes.

    Science.gov (United States)

    Uerling, Donald F.

    School officials see a need for regulations that prohibit disruptive and inappropriate forms of expression and attire; students see these regulations as unwanted restrictions on their freedom. This paper reviews court litigation involving constitutional limitations on school authority, dress and hair codes, state law constraints, and school…

  1. Differential pulse code modulation

    Science.gov (United States)

    Herman, C. F. (Inventor)

    1976-01-01

    A differential pulse code modulation (DPCM) encoding and decoding method is described along with an apparatus which is capable of transmission with minimum bandwidth. The apparatus is not affected by data transition density, requires no direct current (DC) response of the transmission link, and suffers from minimal ambiguity in resolution of the digital data.

  2. Error Correcting Codes

    Indian Academy of Sciences (India)

    syndrome is an indicator of underlying disease. Here too, a non zero syndrome is an indication that something has gone wrong during transmission. SERIES I ARTICLE. The first matrix on the left hand side is called the parity check matrix H. Thus every codeword c satisfies the equation o o. HcT = o o. Therefore the code can ...

  3. Focusing Automatic Code Inspections

    NARCIS (Netherlands)

    Boogerd, C.J.

    2010-01-01

    Automatic Code Inspection tools help developers in early detection of defects in software. A well-known drawback of many automatic inspection approaches is that they yield too many warnings and require a clearer focus. In this thesis, we provide such focus by proposing two methods to prioritize

  4. Reliability and code level

    NARCIS (Netherlands)

    Kasperski, M.; Geurts, C.P.W.

    2005-01-01

    The paper describes the work of the IAWE Working Group WBG - Reliability and Code Level, one of the International Codification Working Groups set up at ICWE10 in Copenhagen. The following topics are covered: sources of uncertainties in the design wind load, appropriate design target values for the

  5. Broadcast Coded Slotted ALOHA

    DEFF Research Database (Denmark)

    Ivanov, Mikhail; Brännström, Frederik; Graell i Amat, Alexandre

    2016-01-01

    We propose an uncoordinated medium access control (MAC) protocol, called all-to-all broadcast coded slotted ALOHA (B-CSA) for reliable all-to-all broadcast with strict latency constraints. In B-CSA, each user acts as both transmitter and receiver in a half-duplex mode. The half-duplex mode gives...

  6. Ready, steady… Code!

    CERN Multimedia

    Anaïs Schaeffer

    2013-01-01

    This summer, CERN took part in the Google Summer of Code programme for the third year in succession. Open to students from all over the world, this programme leads to very successful collaborations for open source software projects.   Image: GSoC 2013. Google Summer of Code (GSoC) is a global programme that offers student developers grants to write code for open-source software projects. Since its creation in 2005, the programme has brought together some 6,000 students from over 100 countries worldwide. The students selected by Google are paired with a mentor from one of the participating projects, which can be led by institutes, organisations, companies, etc. This year, CERN PH Department’s SFT (Software Development for Experiments) Group took part in the GSoC programme for the third time, submitting 15 open-source projects. “Once published on the Google Summer for Code website (in April), the projects are open to applications,” says Jakob Blomer, one of the o...

  7. (Almost) practical tree codes

    KAUST Repository

    Khina, Anatoly

    2016-08-15

    We consider the problem of stabilizing an unstable plant driven by bounded noise over a digital noisy communication link, a scenario at the heart of networked control. To stabilize such a plant, one needs real-time encoding and decoding with an error probability profile that decays exponentially with the decoding delay. The works of Schulman and Sahai over the past two decades have developed the notions of tree codes and anytime capacity, and provided the theoretical framework for studying such problems. Nonetheless, there has been little practical progress in this area due to the absence of explicit constructions of tree codes with efficient encoding and decoding algorithms. Recently, linear time-invariant tree codes were proposed to achieve the desired result under maximum-likelihood decoding. In this work, we take one more step towards practicality, by showing that these codes can be efficiently decoded using sequential decoding algorithms, up to some loss in performance (and with some practical complexity caveats). We supplement our theoretical results with numerical simulations that demonstrate the effectiveness of the decoder in a control system setting.

  8. Physical layer network coding

    DEFF Research Database (Denmark)

    Fukui, Hironori; Popovski, Petar; Yomo, Hiroyuki

    2014-01-01

    Physical layer network coding (PLNC) has been proposed to improve throughput of the two-way relay channel, where two nodes communicate with each other, being assisted by a relay node. Most of the works related to PLNC are focused on a simple three-node model and they do not take into account...

  9. Corporate governance through codes

    NARCIS (Netherlands)

    Haxhi, I.; Aguilera, R.V.; Vodosek, M.; den Hartog, D.; McNett, J.M.

    2014-01-01

    The UK's 1992 Cadbury Report defines corporate governance (CG) as the system by which businesses are directed and controlled. CG codes are a set of best practices designed to address deficiencies in the formal contracts and institutions by suggesting prescriptions on the preferred role and

  10. Ptolemy Coding Style

    Science.gov (United States)

    2014-09-05

    because this would combine Ptolemy II with the GPL’d code and thus encumber Ptolemy II with the GPL. Another GNU license is the GNU Library General...permission on the source.eecs.berkeley.edu repositories, then use your local repository. bash-3.2$ svn co svn+ ssh ://source.eecs.berkeley.edu/chess

  11. Code manual for MACCS2: Volume 1, user's guide

    International Nuclear Information System (INIS)

    Chanin, D.I.; Young, M.L.

    1997-03-01

    This report describes the use of the MACCS2 code. The document is primarily a user's guide, though some model description information is included. MACCS2 represents a major enhancement of its predecessor MACCS, the MELCOR Accident Consequence Code System. MACCS, distributed by government code centers since 1990, was developed to evaluate the impacts of severe accidents at nuclear power plants on the surrounding public. The principal phenomena considered are atmospheric transport and deposition under time-variant meteorology, short- and long-term mitigative actions and exposure pathways, deterministic and stochastic health effects, and economic costs. No other U.S. code that is publicly available at present offers all these capabilities. MACCS2 was developed as a general-purpose tool applicable to diverse reactor and nonreactor facilities licensed by the Nuclear Regulatory Commission or operated by the Department of Energy or the Department of Defense. The MACCS2 package includes three primary enhancements: (1) a more flexible emergency-response model, (2) an expanded library of radionuclides, and (3) a semidynamic food-chain model. Other improvements are in the areas of phenomenological modeling and new output options. Initial installation of the code, written in FORTRAN 77, requires a 486 or higher IBM-compatible PC with 8 MB of RAM

  12. Current Status of the LIFE Fast Reactors Fuel Performance Codes

    International Nuclear Information System (INIS)

    Yacout, A.M.; Billone, M.C.

    2013-01-01

    The LIFE-4 (Rev. 1) code was calibrated and validated using data from (U,Pu)O2 mixed-oxide fuel pins and UO2 blanket rods which were irradiation tested under steady-state and transient conditions. – It integrates a broad material and fuel-pin irradiation database into a consistent framework for use and extrapolation of the database to reactor design applications. – The code is available and running on different computer platforms (UNIX & PC) – Detailed documentations of the code’s models, routines, calibration and validation data sets are available. LIFE-METAL code is based on LIFE4 with modifications to include key phenomena applicable to metallic fuel, and metallic fuel properties – Calibrated with large database from irradiations in EBR-II – Further effort for calibration and detailed documentation. Recent activities with the codes are related to reactor design studies and support of licensing efforts for 4S and KAERI SFR designs. Future activities are related to re-assessment of the codes calibration and validation and inclusion of models for advanced fuels (transmutation fuels)

  13. The FORTRAN NALAP code adapted to a microcomputer compiler

    International Nuclear Information System (INIS)

    Lobo, Paulo David de Castro; Borges, Eduardo Madeira; Braz Filho, Francisco Antonio; Guimaraes, Lamartine Nogueira Frutuoso

    2010-01-01

    The Nuclear Energy Division of the Institute for Advanced Studies (IEAv) is conducting the TERRA project (TEcnologia de Reatores Rapidos Avancados), Technology for Advanced Fast Reactors project, aimed at a space reactor application. In this work, to attend the TERRA project, the NALAP code adapted to a microcomputer compiler called Compaq Visual Fortran (Version 6.6) is presented. This code, adapted from the light water reactor transient code RELAP 3B, simulates thermal-hydraulic responses for sodium cooled fast reactors. The strategy to run the code in a PC was divided in some steps mainly to remove unnecessary routines, to eliminate old statements, to introduce new ones and also to include extension precision mode. The source program was able to solve three sample cases under conditions of protected transients suggested in literature: the normal reactor shutdown, with a delay of 200 ms to start the control rod movement and a delay of 500 ms to stop the pumps; reactor scram after transient of loss of flow; and transients protected from overpower. Comparisons were made with results from the time when the NALAP code was acquired by the IEAv, back in the 80's. All the responses for these three simulations reproduced the calculations performed with the CDC compiler in 1985. Further modifications will include the usage of gas as coolant for the nuclear reactor to allow a Closed Brayton Cycle Loop - CBCL - to be used as a heat/electric converter. (author)

  14. The FORTRAN NALAP code adapted to a microcomputer compiler

    Energy Technology Data Exchange (ETDEWEB)

    Lobo, Paulo David de Castro; Borges, Eduardo Madeira; Braz Filho, Francisco Antonio; Guimaraes, Lamartine Nogueira Frutuoso, E-mail: plobo.a@uol.com.b, E-mail: eduardo@ieav.cta.b, E-mail: fbraz@ieav.cta.b, E-mail: guimarae@ieav.cta.b [Instituto de Estudos Avancados (IEAv/CTA), Sao Jose dos Campos, SP (Brazil)

    2010-07-01

    The Nuclear Energy Division of the Institute for Advanced Studies (IEAv) is conducting the TERRA project (TEcnologia de Reatores Rapidos Avancados), Technology for Advanced Fast Reactors project, aimed at a space reactor application. In this work, to attend the TERRA project, the NALAP code adapted to a microcomputer compiler called Compaq Visual Fortran (Version 6.6) is presented. This code, adapted from the light water reactor transient code RELAP 3B, simulates thermal-hydraulic responses for sodium cooled fast reactors. The strategy to run the code in a PC was divided in some steps mainly to remove unnecessary routines, to eliminate old statements, to introduce new ones and also to include extension precision mode. The source program was able to solve three sample cases under conditions of protected transients suggested in literature: the normal reactor shutdown, with a delay of 200 ms to start the control rod movement and a delay of 500 ms to stop the pumps; reactor scram after transient of loss of flow; and transients protected from overpower. Comparisons were made with results from the time when the NALAP code was acquired by the IEAv, back in the 80's. All the responses for these three simulations reproduced the calculations performed with the CDC compiler in 1985. Further modifications will include the usage of gas as coolant for the nuclear reactor to allow a Closed Brayton Cycle Loop - CBCL - to be used as a heat/electric converter. (author)

  15. Accumulate Repeat Accumulate Coded Modulation

    Science.gov (United States)

    Abbasfar, Aliazam; Divsalar, Dariush; Yao, Kung

    2004-01-01

    In this paper we propose an innovative coded modulation scheme called 'Accumulate Repeat Accumulate Coded Modulation' (ARA coded modulation). This class of codes can be viewed as serial turbo-like codes, or as a subclass of Low Density Parity Check (LDPC) codes that are combined with high level modulation. Thus at the decoder belief propagation can be used for iterative decoding of ARA coded modulation on a graph, provided a demapper transforms the received in-phase and quadrature samples to reliability of the bits.

  16. Causation, constructors and codes.

    Science.gov (United States)

    Hofmeyr, Jan-Hendrik S

    2018-02-01

    Relational biology relies heavily on the enriched understanding of causal entailment that Robert Rosen's formalisation of Aristotle's four causes has made possible, although to date efficient causes and the rehabilitation of final cause have been its main focus. Formal cause has been paid rather scant attention, but, as this paper demonstrates, is crucial to our understanding of many types of processes, not necessarily biological. The graph-theoretic relational diagram of a mapping has played a key role in relational biology, and the first part of the paper is devoted to developing an explicit representation of formal cause in the diagram and how it acts in combination with efficient cause to form a mapping. I then use these representations to show how Von Neumann's universal constructor can be cast into a relational diagram in a way that avoids the logical paradox that Rosen detected in his own representation of the constructor in terms of sets and mappings. One aspect that was absent from both Von Neumann's and Rosen's treatments was the necessity of a code to translate the description (the formal cause) of the automaton to be constructed into the construction process itself. A formal definition of codes in general, and organic codes in particular, allows the relational diagram to be extended so as to capture this translation of formal cause into process. The extended relational diagram is used to exemplify causal entailment in a diverse range of processes, such as enzyme action, construction of automata, communication through the Morse code, and ribosomal polypeptide synthesis through the genetic code. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Fuzzy Based PC-PUSH in CR-MANETs

    Directory of Open Access Journals (Sweden)

    S. Nejatian

    2014-01-01

    Full Text Available In cognitive radio (CR, the secondary user (SU needs to hand off its ongoing communication to an idle channel in order to avoid interference to the primary user (PU. Spectrum hand off issue becomes challenging in CR mobile ad hoc networks (CR-MANETs because of the uncertainty in spectrum availability, broad range of spectrum bands and lack of central entity. The purpose of this study is to design a unified spectrum handoff (USH scheme for CR-MANETs that considers the spectrum heterogeneity and its availability over time and space. A local flow hand off is performed when spectrum hand off cannot be carried out due to the SUs mobility. To improve further USH, preemptive unified spectrum handoff (PUSH algorithm is proposed in which two different preemptive hand off threshold regions are defined. The PUSH algorithm also predicts the cognitive link availability considering the PU interference boundary. Although the PUSH scheme improves the hand off performance, the number of spectrum hand offs due to the PU activity should be reduced in this scheme. Therefore, the PC-PUSH (Power Controller-PUSH scheme is proposed in which the fuzzy logic is used to improve the PUSH in terms of the number of spectrum handoffs because of the PU activity. The PC-PUSH decreases the interference to the PUs, while reducing the number of spectrum handoffs. The results show that the proposed scheme improves the link maintenance probability, decreases the hand off delay, and reduces the number of spectrum handoffs.

  18. Neurodegenerative effects of azithromycin in differentiated PC12 cells.

    Science.gov (United States)

    Waetzig, Vicki; Riffert, Jeanette; Cordt, Justus; Reinecke, Kirstin; Haeusgen, Wiebke; Boehm, Ruwen; Cascorbi, Ingolf; Herdegen, Thomas

    2017-08-15

    Azithromycin is a widely used macrolide antibiotic with sustained and high tissue penetration and intracellular accumulation. While short-term exposure to low-dose azithromycin is usually well tolerated, prolonged treatment can lead to unwanted neurological effects like paresthesia and hearing loss. However, the mechanism causing neurodegeneration is still unknown. Here, we show that even low therapeutically relevant azithromycin concentrations like 1µg/ml decreased cell viability by 15% and induced neurite loss of 47% after 96h in differentiated PC12 cells, which are a well-established model system for neuronal cells. When higher concentrations were used, the drug-induced effects occurred earlier and were more pronounced. Thereby, azithromycin altered tropomyosin-related kinase A (TrkA) signaling and attenuated protein kinase B (Akt) activity, which subsequently induced autophagy. Simultaneously, the antibiotic impaired lysosomal functions by blocking the autophagic flux, and this concurrence reduced cell viability. In good agreement with reversible effects observed in patients, PC12 cells could completely recover if azithromycin was removed after 24h. In addition, the detrimental effects of azithromycin were limited to differentiated cells, as confirmed in the human neuronal model cell line SH-SY5Y. Thus, azithromycin alters cell surface receptor signaling and autophagy in neuronal cells, but does not automatically induce irreversible damage when used in low concentrations and for a short time. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. GVTRAN-PC-a steam generator transient simulator

    International Nuclear Information System (INIS)

    Nakata, H.

    1991-02-01

    Since an accuracy and inexpensive analysis capability is one of the desirable requirement in the reactor licensing procedure and, also, in instances when a severe accident sequence and its degree of severity must be estimated, the present work tries partially to fulfill that present need by developing a fast and acceptably accurate simulator. The present report presents the methodology utilized to develop GVTRAN-PC program, the steam generator simulation program for the microcomputer environment, which possess a capability to reproduce the experimental data with accuracies comparable to those of the mainframe simulators. The methodology is based on the mass and energy conservation in the control volumes which represents both the primary and the secondary fluid in the U-tube steam generator. The quasi-static momentum conservation in the secondary fluid control volumes determines in a semi-iterative scheme the liquid level in the feedwater chamber. The implementation of the moving boundary technique has allowed the tracking of the boundary of bulk boiling region with the utilization of a reduced number of control volumes in the tube region. GVTRAN-PC program has been tested against typical PWR pump trip transient experimental data and the calculation results showed good agreement in most representative parameters, viz. the feedchamber water-level and the steam dome pressure. (author)

  20. Pheochromocytoma (PC12 Cell Response on Mechanobactericidal Titanium Surfaces

    Directory of Open Access Journals (Sweden)

    Jason V. Wandiyanto

    2018-04-01

    Full Text Available Titanium is a biocompatible material that is frequently used for making implantable medical devices. Nanoengineering of the surface is the common method for increasing material biocompatibility, and while the nanostructured materials are well-known to represent attractive substrata for eukaryotic cells, very little information has been documented about the interaction between mammalian cells and bactericidal nanostructured surfaces. In this study, we investigated the effect of bactericidal titanium nanostructures on PC12 cell attachment and differentiation—a cell line which has become a widely used in vitro model to study neuronal differentiation. The effects of the nanostructures on the cells were then compared to effects observed when the cells were placed in contact with non-structured titanium. It was found that bactericidal nanostructured surfaces enhanced the attachment of neuron-like cells. In addition, the PC12 cells were able to differentiate on nanostructured surfaces, while the cells on non-structured surfaces were not able to do so. These promising results demonstrate the potential application of bactericidal nanostructured surfaces in biomedical applications such as cochlear and neuronal implants.

  1. On the quiet-time Pc 5 pulsation events (spacequakes)

    International Nuclear Information System (INIS)

    Gupta, J.C.; Niblett, E.R.

    1979-01-01

    A quiet-time Pc 5 event (designated Spacequake) of March 18, 1974, first noted on the Fort Churchill magnetogram, was studied using global data. Its amplitude was found to be largest in the northern part of the auroral zone and its period seemed to increase with latitude. The clockwise polarization of the event noted at Baker Lake and higher latitudes changed to counterclockwise at Fort Churchill in X-Y, X-Z and Y-Z planes. The resonance of a field line (L approximately 10) excited due to an instability of the Kelvin-Helmholtz type may have given rise to the observed event. It is conjectured that the cause of instability at this altitude was internal convection of the magnetosphere. Similar quiet-time events from four Canadian observatories were selected from approximately 11 years of magnetograms and their statistical analysis revealed that (i) occurrences maximised near dawn and dusk (ii) the amplitude-latitude profile peaked at Great Whale River (L approximately 6.67), (iii) periods increased with increasing geomagnetic latitudes, (iv) a large number of events occurred in January, February and March every year, and (v) frequency of occurrence increased with increasing sunspot numbers. Comparison of these results with those available in the literature from analyses of satellite data clearly indicate that quiet-time Pc 5 events (Spacequakes) originate in the outer magnetosphere. (author)

  2. Nuclear data retrieval for PC applications, PCNuDat

    International Nuclear Information System (INIS)

    Kinsey, R.R.

    1996-01-01

    The PCNuDat program for IBM-PC compatibles is similar to the NuDat program available through the NNDC Online Nuclear Data Service. They provide a user with access to nuclear data in a convenient and menu driven system. This data is useful in both basic and applied research. The nuclear base used by NuDat is extracted from several data bases maintained at the National Nuclear Data Center (NNDC). The program is an extended DOS program which uses 32 bit addressing. It can run in a DOS window on all the current Windows operating systems. The program and its data base are currently available on both a CD-ROM or electronically over the Internet. Electronic access can be made through the NNDC's Web home page. The files may also be FTP'd from the public area under the [pc prog] directory on bnlnd2.dne.bnl.gov. The CD-ROM version also contains the Nuclear Science References (NSR) data base and its retrieval program, Papyrus NSR

  3. FASTDART - A fast, accurate and friendly version of DART code

    International Nuclear Information System (INIS)

    Rest, Jeffrey; Taboada, Horacio

    2000-01-01

    A new enhanced, visual version of DART code is presented. DART is a mechanistic model based code, developed for the performance calculation and assessment of aluminum dispersion fuel. Major issues of this new version are the development of a new, time saving calculation routine, able to be run on PC, a friendly visual input interface and a plotting facility. This version, available for silicide and U-Mo fuels, adds to the classical accuracy of DART models for fuel performance prediction, a faster execution and visual interfaces. It is part of a collaboration agreement between ANL and CNEA in the area of Low Enriched Uranium Advanced Fuels, held by the Implementation Arrangement for Technical Exchange and Cooperation in the Area of Peaceful Uses of Nuclear Energy. (author)

  4. Constraints on Small-scale Heterogeneity in the Lowermost Mantle from Observations of Near Podal PcP Precursors

    Science.gov (United States)

    Zhang, B.; Ni, S.; Sun, D.; Shen, Z.; Jackson, J. M.; Wu, W.

    2017-12-01

    Volumetric heterogeneity on large scales ( >1000 km) and intermediate scales ( >100km) in the lowermost mantle have been established with seismological approaches. However, there are controversies regarding the level of heterogeneity in lowermost mantle at small scales (a few kilometers to tens of kilometers), with lower bound estimates ranging from 0.1% to a few percent. We take advantage of the small amplitude PcP waves at near podal distances (0-12°) to constrain the level of small-scale heterogeneity in the lowermost mantle. First, we compute short period synthetic seismograms with a finite difference code for a series of volumetric heterogeneity models in the lowermost mantle, and find that PcP is not identifiable if the small-scale heterogeneity in the lowermost mantle is above 2.0%. And then we use a functional form appropriate for coda decay to suppress P coda contamination. By comparing the corrected envelope of PcP and its precursors with synthetic seismograms, we find that perturbation of small-scale ( 8 km) heterogeneity in the lowermost mantle is 0.2% beneath regions to the east of China-Myanmar border area, north of Okhotsk Sea and South America. The perturbation is 0.5% beneath south of Okhotsk Sea and west of China-Myanmar border area, whereas strong perturbations ( 1.0%) are found beneath Central America. In the regions studied, we find that this particular type of small scale heterogeneity in lowermost mantle is weak, yet there are some regions requiring heterogeneity up to 1.0%. Where scattering is stronger, such as under Central America, more chemically complex mineral assemblages may be present at the core-mantle boundary.

  5. ARDOSE: a PC program for stack design and the PRR-1 41Ar effluent

    International Nuclear Information System (INIS)

    Leopando, L.S.

    1994-01-01

    General atomics (GA) calculated the rate of release of 41 Ar in the safety analysis report it prepared for TRIGA conversion of the PRR-1 (TR-86-01, 1987), and PNRI attempted to calculate the exposure dose to the public from the rate of release and meteorological data for the reactor site (Palattao et al., 1989) The former calculation is not completely applicable now, because the physical configurations of the irradiation facilities and ventilation system have changed. The result of the latter calculation is in doubt because the 41 Ar release rate it claimed to use is not in agreement with TR-86-01, 1987. AR DOSE was written to replace both of these calculations with one program for the PC. AR DOSE is a companion program to DBA DOSE (The Nucleus, 1989), a program written to calculate the exposure dose from the release of fission products during the design basis accident (DBA). The PRR-1 uses the same stack for DBA release as for the routine release of 41 Ar elluent. The source code of AR DOSE contains approximately 1100 lines of FORTRAN-77 (written for the Microsoft Fortran 4.10 compiler) and 300 lines of Assembler. AR D OSE.EXE is only 50 kB in size and needs only about 54 kB of RAM to run. A math-coprocessor is not needed but will speed up runs considerably. 7 refs., 1 tab

  6. WINDOW 4. 0: Program description. A PC program for analyzing the thermal performance of fenestration products

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    WINDOW 4.0 is a publicly available IBM PC compatible computer program developed by the Windows and Daylighting Group at Lawrence Berkeley Laboratory for calculating total window thermal performance indices (e.g. U-values, solar heat gain coefficients, shading coefficients, and visible transmittances). WINDOW 4.0 provides a versatile heat transfer analysis method consistent with the rating procedure developed by the National Fenestration Rating Council (NFRC). The program can be used to design and develop new products, to rate and compare performance characteristics of all types of window products, to assist educators in teaching heat transfer through windows, and to help public officials in developing building energy codes. WINDOW 4.0 is a major revision to WINDOW 3.1 and we strongly urge all users to read this manual before using the program. Users who need professional assistance with the WINDOW 4.0 program or other window performance simulation issues are encouraged to contact one or more of the NFRC-accredited Simulation Laboratories. A list of these accredited simulation professionals is available from the NFRC.

  7. Entanglement-assisted quantum MDS codes constructed from negacyclic codes

    Science.gov (United States)

    Chen, Jianzhang; Huang, Yuanyuan; Feng, Chunhui; Chen, Riqing

    2017-12-01

    Recently, entanglement-assisted quantum codes have been constructed from cyclic codes by some scholars. However, how to determine the number of shared pairs required to construct entanglement-assisted quantum codes is not an easy work. In this paper, we propose a decomposition of the defining set of negacyclic codes. Based on this method, four families of entanglement-assisted quantum codes constructed in this paper satisfy the entanglement-assisted quantum Singleton bound, where the minimum distance satisfies q+1 ≤ d≤ n+2/2. Furthermore, we construct two families of entanglement-assisted quantum codes with maximal entanglement.

  8. Codes of Good Governance

    DEFF Research Database (Denmark)

    Beck Jørgensen, Torben; Sørensen, Ditte-Lene

    2013-01-01

    Good governance is a broad concept used by many international organizations to spell out how states or countries should be governed. Definitions vary, but there is a clear core of common public values, such as transparency, accountability, effectiveness, and the rule of law. It is quite likely......, however, that national views of good governance reflect different political cultures and institutional heritages. Fourteen national codes of conduct are analyzed. The findings suggest that public values converge and that they match model codes from the United Nations and the European Council as well...... as conceptions of good governance from other international organizations. While values converge, they are balanced and communicated differently, and seem to some extent to be translated into the national cultures. The set of global public values derived from this analysis include public interest, regime dignity...

  9. Coding isotropic images

    Science.gov (United States)

    Oneal, J. B., Jr.; Natarajan, T. R.

    1976-01-01

    Rate distortion functions for two-dimensional homogeneous isotropic images are compared with the performance of 5 source encoders designed for such images. Both unweighted and frequency weighted mean square error distortion measures are considered. The coders considered are differential PCM (DPCM) using six previous samples in the prediction, herein called 6 pel (picutre element) DPCM; simple DPCM using single sample prediction; 6 pel DPCM followed by entropy coding; 8 x 8 discrete cosine transform coder, and 4 x 4 Hadamard transform coder. Other transform coders were studied and found to have about the same performance as the two transform coders above. With the mean square error distortion measure DPCM with entropy coding performed best. The relative performance of the coders changes slightly when the distortion measure is frequency weighted mean square error. The performance of all the coders was separated by only about 4 dB.

  10. Efficient convolutional sparse coding

    Energy Technology Data Exchange (ETDEWEB)

    Wohlberg, Brendt

    2017-06-20

    Computationally efficient algorithms may be applied for fast dictionary learning solving the convolutional sparse coding problem in the Fourier domain. More specifically, efficient convolutional sparse coding may be derived within an alternating direction method of multipliers (ADMM) framework that utilizes fast Fourier transforms (FFT) to solve the main linear system in the frequency domain. Such algorithms may enable a significant reduction in computational cost over conventional approaches by implementing a linear solver for the most critical and computationally expensive component of the conventional iterative algorithm. The theoretical computational cost of the algorithm may be reduced from O(M.sup.3N) to O(MN log N), where N is the dimensionality of the data and M is the number of elements in the dictionary. This significant improvement in efficiency may greatly increase the range of problems that can practically be addressed via convolutional sparse representations.

  11. Computer code FIT

    International Nuclear Information System (INIS)

    Rohmann, D.; Koehler, T.

    1987-02-01

    This is a description of the computer code FIT, written in FORTRAN-77 for a PDP 11/34. FIT is an interactive program to decude position, width and intensity of lines of X-ray spectra (max. length of 4K channels). The lines (max. 30 lines per fit) may have Gauss- or Voigt-profile, as well as exponential tails. Spectrum and fit can be displayed on a Tektronix terminal. (orig.) [de

  12. Status of MARS Code

    Energy Technology Data Exchange (ETDEWEB)

    N.V. Mokhov

    2003-04-09

    Status and recent developments of the MARS 14 Monte Carlo code system for simulation of hadronic and electromagnetic cascades in shielding, accelerator and detector components in the energy range from a fraction of an electronvolt up to 100 TeV are described. these include physics models both in strong and electromagnetic interaction sectors, variance reduction techniques, residual dose, geometry, tracking, histograming. MAD-MARS Beam Line Build and Graphical-User Interface.

  13. Cracking the Gender Codes

    DEFF Research Database (Denmark)

    Rennison, Betina Wolfgang

    2016-01-01

    Why do men continue to fill most of the senior executive positions and seats in the board of directors in Western corporations? Almost everyone agrees that diversity is good, many women are coming down the pipeline, and companies, states and international organizations and institutions have done...... in leadership management, we must become more aware and take advantage of this complexity. We must crack the codes in order to crack the curve....

  14. Hydra Code Release

    OpenAIRE

    Couchman, H. M. P.; Pearce, F. R.; Thomas, P. A.

    1996-01-01

    Comment: A new version of the AP3M-SPH code, Hydra, is now available as a tar file from the following sites; http://coho.astro.uwo.ca/pub/hydra/hydra.html , http://star-www.maps.susx.ac.uk/~pat/hydra/hydra.html . The release now also contains a cosmological initial conditions generator, documentation, an installation guide and installation tests. A LaTex version of the documentation is included here

  15. Tokamak simulation code manual

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Moon Kyoo; Oh, Byung Hoon; Hong, Bong Keun; Lee, Kwang Won [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-01-01

    The method to use TSC (Tokamak Simulation Code) developed by Princeton plasma physics laboratory is illustrated. In KT-2 tokamak, time dependent simulation of axisymmetric toroidal plasma and vertical stability have to be taken into account in design phase using TSC. In this report physical modelling of TSC are described and examples of application in JAERI and SERI are illustrated, which will be useful when TSC is installed KAERI computer system. (Author) 15 refs., 6 figs., 3 tabs.

  16. Tokamak simulation code manual

    International Nuclear Information System (INIS)

    Chung, Moon Kyoo; Oh, Byung Hoon; Hong, Bong Keun; Lee, Kwang Won

    1995-01-01

    The method to use TSC (Tokamak Simulation Code) developed by Princeton plasma physics laboratory is illustrated. In KT-2 tokamak, time dependent simulation of axisymmetric toroidal plasma and vertical stability have to be taken into account in design phase using TSC. In this report physical modelling of TSC are described and examples of application in JAERI and SERI are illustrated, which will be useful when TSC is installed KAERI computer system. (Author) 15 refs., 6 figs., 3 tabs

  17. Platycodin D induced apoptosis and autophagy in PC-12 cells through mitochondrial dysfunction pathway

    Science.gov (United States)

    Zeng, Chuan-Chuan; Zhang, Cheng; Yao, Jun-Hua; Lai, Shang-Hai; Han, Bing-Jie; Li, Wei; Tang, Bing; Wan, Dan; Liu, Yun-Jun

    2016-11-01

    In this article, the in vitro cytotoxicity of platycodin D was evaluated in human PC-12, SGC-7901, BEL-7402, HeLa and A549 cancer cell lines. PC-12 cells were sensitive to platycodin D treatment, with an IC50 value of 13.5 ± 1.2 μM. Morphological and comet assays showed that platycodin D effectively induced apoptosis in PC-12 cells. Platycodin D increased the levels of reactive oxygen species (ROS) and induced a decrease in mitochondrial membrane potential. Platycodin D induced cell cycle arrest at the G0/G1 phase in the PC-12 cell line. Platycodin D can induce autophagy. In addition, platycodin D can down-regulate the expression of Bcl-2 and Bcl-x, and up-regulate the levels of Bid protein in the PC-12 cells. The results demonstrated that platycodin D induced PC-12 cell apoptosis through a ROS-mediated mitochondrial dysfunction pathway.

  18. Reengineering a PC-based System into the Mobile Device Product Line

    DEFF Research Database (Denmark)

    Zhang, Weishan; Jarzabek, Stanislaw; Loughran, Neil

    2003-01-01

    There is a growing demand to port existing PC-based software systems to mobile device platforms. Systems running on mobile devices share basic characteristics with their PC-based counterparts, but differ from them in details of user interfaces, application models, etc. Systems running on mobile...... devices must also perform well using less memory than PC-based systems. Mobile devices themselves are different from each other in many ways, too. We describe how we made an existing PC-based City Guide System available on a wide range of mobile devices, in a cost-effective way. We applied "reengineering...... into a product line architecture" approach to achieve the goal. Our product line architecture facilitates reuse via generation. We generate specific City Guide Systems for target platforms including PC, Pocket PC and other mobile devices, from generic meta-components that form the City Guide System product line...

  19. Is there a link between proprotein convertase PC7 activity and human lipid homeostasis?

    Directory of Open Access Journals (Sweden)

    Johann Guillemot

    2014-01-01

    Full Text Available A genome-wide association study suggested that a R504H mutation in the proprotein convertase PC7 is associated with increased circulating levels of HDL and reduced triglycerides in black Africans. Our present results show that PC7 and PC7-R504H exhibit similar processing of transferrin receptor-1, proSortilin, and apolipoprotein-F. Plasma analyses revealed no change in the lipid profiles, insulin or glucose of wild type and PC7 KO mice. Thus, the R504H mutation does not modify the proteolytic activity of PC7. The mechanisms behind the implication of PC7 in the regulation of human HDL, triglycerides and in modifying the levels of atherogenic small dense LDL remain to be elucidated.

  20. MELCOR computer code manuals

    Energy Technology Data Exchange (ETDEWEB)

    Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L. [Sandia National Labs., Albuquerque, NM (United States); Hodge, S.A.; Hyman, C.R.; Sanders, R.L. [Oak Ridge National Lab., TN (United States)

    1995-03-01

    MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR`s phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package.

  1. Bar coded retroreflective target

    Science.gov (United States)

    Vann, Charles S.

    2000-01-01

    This small, inexpensive, non-contact laser sensor can detect the location of a retroreflective target in a relatively large volume and up to six degrees of position. The tracker's laser beam is formed into a plane of light which is swept across the space of interest. When the beam illuminates the retroreflector, some of the light returns to the tracker. The intensity, angle, and time of the return beam is measured to calculate the three dimensional location of the target. With three retroreflectors on the target, the locations of three points on the target are measured, enabling the calculation of all six degrees of target position. Until now, devices for three-dimensional tracking of objects in a large volume have been heavy, large, and very expensive. Because of the simplicity and unique characteristics of this tracker, it is capable of three-dimensional tracking of one to several objects in a large volume, yet it is compact, light-weight, and relatively inexpensive. Alternatively, a tracker produces a diverging laser beam which is directed towards a fixed position, and senses when a retroreflective target enters the fixed field of view. An optically bar coded target can be read by the tracker to provide information about the target. The target can be formed of a ball lens with a bar code on one end. As the target moves through the field, the ball lens causes the laser beam to scan across the bar code.

  2. MELCOR computer code manuals

    International Nuclear Information System (INIS)

    Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L.; Hodge, S.A.; Hyman, C.R.; Sanders, R.L.

    1995-03-01

    MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR's phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package

  3. Development of PARASOL code

    Energy Technology Data Exchange (ETDEWEB)

    Hosokawa, Masanari [Research Organization for Information Science and Technology, Tokai, Ibaraki (Japan); Takizuka, Tomonori [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

    2000-05-01

    The divertor is expected to play key roles in tokamak reactors, such as ITER, for the heat removal, ash exhaust, and impurity shielding. Its performance is being predicted by using comprehensive simulation codes with the fluid model. In the fluid model for scrape-off layer (SOL) and divertor plasmas, various physics models are introduced. Kinetic approach is required to examine the validity of such physics models. One of the most powerful kinetic models is the particle simulation. Therefore a particle code PARASOL has been developed, and is being used for the simulation study of SOL and divertor plasmas. The PARASOL code treats the plasma bounded by two divertor plates, in which motions of ions and electrons are traced by using a electrostatic PIC method. Effects of Coulomb collisions are simulated by using a Monte-Carlo=method binary collision model. Motions of neutral particles are traced simultaneously with charged particles. In this report, we describe the physics model of PARASOL, the numerical methods, the configuration of the program, input parameters, output formats, samples of simulation results, the parallel computing method. The efficiency of the parallel computing with Paragon XP/S15-256 is demonstrated. (author)

  4. Code Modernization of VPIC

    Science.gov (United States)

    Bird, Robert; Nystrom, David; Albright, Brian

    2017-10-01

    The ability of scientific simulations to effectively deliver performant computation is increasingly being challenged by successive generations of high-performance computing architectures. Code development to support efficient computation on these modern architectures is both expensive, and highly complex; if it is approached without due care, it may also not be directly transferable between subsequent hardware generations. Previous works have discussed techniques to support the process of adapting a legacy code for modern hardware generations, but despite the breakthroughs in the areas of mini-app development, portable-performance, and cache oblivious algorithms the problem still remains largely unsolved. In this work we demonstrate how a focus on platform agnostic modern code-development can be applied to Particle-in-Cell (PIC) simulations to facilitate effective scientific delivery. This work builds directly on our previous work optimizing VPIC, in which we replaced intrinsic based vectorisation with compile generated auto-vectorization to improve the performance and portability of VPIC. In this work we present the use of a specialized SIMD queue for processing some particle operations, and also preview a GPU capable OpenMP variant of VPIC. Finally we include a lessons learnt. Work performed under the auspices of the U.S. Dept. of Energy by the Los Alamos National Security, LLC Los Alamos National Laboratory under contract DE-AC52-06NA25396 and supported by the LANL LDRD program.

  5. Quality Improvement of MARS Code and Establishment of Code Coupling

    International Nuclear Information System (INIS)

    Chung, Bub Dong; Jeong, Jae Jun; Kim, Kyung Doo

    2010-04-01

    The improvement of MARS code quality and coupling with regulatory auditing code have been accomplished for the establishment of self-reliable technology based regulatory auditing system. The unified auditing system code was realized also by implementing the CANDU specific models and correlations. As a part of the quality assurance activities, the various QA reports were published through the code assessments. The code manuals were updated and published a new manual which describe the new models and correlations. The code coupling methods were verified though the exercise of plant application. The education-training seminar and technology transfer were performed for the code users. The developed MARS-KS is utilized as reliable auditing tool for the resolving the safety issue and other regulatory calculations. The code can be utilized as a base technology for GEN IV reactor applications

  6. On Some Ternary LCD Codes

    OpenAIRE

    Darkunde, Nitin S.; Patil, Arunkumar R.

    2018-01-01

    The main aim of this paper is to study $LCD$ codes. Linear code with complementary dual($LCD$) are those codes which have their intersection with their dual code as $\\{0\\}$. In this paper we will give rather alternative proof of Massey's theorem\\cite{8}, which is one of the most important characterization of $LCD$ codes. Let $LCD[n,k]_3$ denote the maximum of possible values of $d$ among $[n,k,d]$ ternary $LCD$ codes. In \\cite{4}, authors have given upper bound on $LCD[n,k]_2$ and extended th...

  7. Design of convolutional tornado code

    Science.gov (United States)

    Zhou, Hui; Yang, Yao; Gao, Hongmin; Tan, Lu

    2017-09-01

    As a linear block code, the traditional tornado (tTN) code is inefficient in burst-erasure environment and its multi-level structure may lead to high encoding/decoding complexity. This paper presents a convolutional tornado (cTN) code which is able to improve the burst-erasure protection capability by applying the convolution property to the tTN code, and reduce computational complexity by abrogating the multi-level structure. The simulation results show that cTN code can provide a better packet loss protection performance with lower computation complexity than tTN code.

  8. Random linear codes in steganography

    Directory of Open Access Journals (Sweden)

    Kamil Kaczyński

    2016-12-01

    Full Text Available Syndrome coding using linear codes is a technique that allows improvement in the steganographic algorithms parameters. The use of random linear codes gives a great flexibility in choosing the parameters of the linear code. In parallel, it offers easy generation of parity check matrix. In this paper, the modification of LSB algorithm is presented. A random linear code [8, 2] was used as a base for algorithm modification. The implementation of the proposed algorithm, along with practical evaluation of algorithms’ parameters based on the test images was made.[b]Keywords:[/b] steganography, random linear codes, RLC, LSB

  9. State of the art of parallel scientific visualization applications on PC clusters; Etat de l'art des applications de visualisation scientifique paralleles sur grappes de PC

    Energy Technology Data Exchange (ETDEWEB)

    Juliachs, M

    2004-07-01

    In this state of the art on parallel scientific visualization applications on PC clusters, we deal with both surface and volume rendering approaches. We first analyze available PC cluster configurations and existing parallel rendering software components for parallel graphics rendering. CEA/DIF has been studying cluster visualization since 2001. This report is part of a study to set up a new visualization research platform. This platform consisting of an eight-node PC cluster under Linux and a tiled display was installed in collaboration with Versailles-Saint-Quentin University in August 2003. (author)

  10. Containment Code Validation Matrix

    International Nuclear Information System (INIS)

    Chin, Yu-Shan; Mathew, P.M.; Glowa, Glenn; Dickson, Ray; Liang, Zhe; Leitch, Brian; Barber, Duncan; Vasic, Aleks; Bentaib, Ahmed; Journeau, Christophe; Malet, Jeanne; Studer, Etienne; Meynet, Nicolas; Piluso, Pascal; Gelain, Thomas; Michielsen, Nathalie; Peillon, Samuel; Porcheron, Emmanuel; Albiol, Thierry; Clement, Bernard; Sonnenkalb, Martin; Klein-Hessling, Walter; Arndt, Siegfried; Weber, Gunter; Yanez, Jorge; Kotchourko, Alexei; Kuznetsov, Mike; Sangiorgi, Marco; Fontanet, Joan; Herranz, Luis; Garcia De La Rua, Carmen; Santiago, Aleza Enciso; Andreani, Michele; Paladino, Domenico; Dreier, Joerg; Lee, Richard; Amri, Abdallah

    2014-01-01

    The Committee on the Safety of Nuclear Installations (CSNI) formed the CCVM (Containment Code Validation Matrix) task group in 2002. The objective of this group was to define a basic set of available experiments for code validation, covering the range of containment (ex-vessel) phenomena expected in the course of light and heavy water reactor design basis accidents and beyond design basis accidents/severe accidents. It was to consider phenomena relevant to pressurised heavy water reactor (PHWR), pressurised water reactor (PWR) and boiling water reactor (BWR) designs of Western origin as well as of Eastern European VVER types. This work would complement the two existing CSNI validation matrices for thermal hydraulic code validation (NEA/CSNI/R(1993)14) and In-vessel core degradation (NEA/CSNI/R(2001)21). The report initially provides a brief overview of the main features of a PWR, BWR, CANDU and VVER reactors. It also provides an overview of the ex-vessel corium retention (core catcher). It then provides a general overview of the accident progression for light water and heavy water reactors. The main focus is to capture most of the phenomena and safety systems employed in these reactor types and to highlight the differences. This CCVM contains a description of 127 phenomena, broken down into 6 categories: - Containment Thermal-hydraulics Phenomena; - Hydrogen Behaviour (Combustion, Mitigation and Generation) Phenomena; - Aerosol and Fission Product Behaviour Phenomena; - Iodine Chemistry Phenomena; - Core Melt Distribution and Behaviour in Containment Phenomena; - Systems Phenomena. A synopsis is provided for each phenomenon, including a description, references for further information, significance for DBA and SA/BDBA and a list of experiments that may be used for code validation. The report identified 213 experiments, broken down into the same six categories (as done for the phenomena). An experiment synopsis is provided for each test. Along with a test description

  11. Stochastic Acceleration of Ions Driven by Pc1 Wave Packets

    Science.gov (United States)

    Khazanov, G. V.; Sibeck, D. G.; Tel'nikhin, A. A.; Kronberg, T. K.

    2015-01-01

    The stochastic motion of protons and He(sup +) ions driven by Pc1 wave packets is studied in the context of resonant particle heating. Resonant ion cyclotron heating typically occurs when wave powers exceed 10(exp -4) nT sq/Hz. Gyroresonance breaks the first adiabatic invariant and energizes keV ions. Cherenkov resonances with the electrostatic component of wave packets can also accelerate ions. The main effect of this interaction is to accelerate thermal protons to the local Alfven speed. The dependencies of observable quantities on the wave power and plasma parameters are determined, and estimates for the heating extent and rate of particle heating in these wave-particle interactions are shown to be in reasonable agreement with known empirical data.

  12. PC based data system for infrared spectrophotometer PU-9512

    International Nuclear Information System (INIS)

    Ali, Mohd Yakub; Venkiteswaran, S.; Nagar, M.S.

    2000-08-01

    This report summarises the upgrading of an old Infra Red Spectrophotometer using a pc for control, data acquisition, storage and analysis. The hardware link is made through RS232C serial port. The control and data management is achieved through software. A brief account of the facilities provided and versatility of the analysis package which was developed in-house in a user friendly menu driven fashion is given here. This is supported by the analysis and inter comparison of infra red spectra of organic/inorganic reactants and products. It has specific application in synthesis and characterization of new extractants, solvents, actinide and lanthanide complexes and in the study of thermally and radiolytically degraded products. (author)

  13. Personal Computer-less (PC-less) Microcontroller Training Kit

    Science.gov (United States)

    Somantri, Y.; Wahyudin, D.; Fushilat, I.

    2018-02-01

    The need of microcontroller training kit is necessary for practical work of students of electrical engineering education. However, to use available training kit not only costly but also does not meet the need of laboratory requirements. An affordable and portable microcontroller kit could answer such problem. This paper explains the design and development of Personal Computer Less (PC-Less) Microcontroller Training Kit. It was developed based on Lattepanda processor and Arduino microcontroller as target. The training kit equipped with advanced input-output interfaces that adopted the concept of low cost and low power system. The preliminary usability testing proved this device can be used as a tool for microcontroller programming and industrial automation training. By adopting the concept of portability, the device could be operated in the rural area which electricity and computer infrastructure are limited. Furthermore, the training kit is suitable for student of electrical engineering student from university and vocational high school.

  14. PC reporting system for radiologists: practical use under PACS environment.

    Science.gov (United States)

    Nakata, N; Yoshihiro, S; Miida, K; Tashima, M; Sunakawa, Y; Harada, J; Tada, S; Fukuda, K

    2001-07-01

    To evaluate the practical usefulness of several types of the reporting system especially for radiologists, we have developed and employed several reporting systems. We categorized those reporting systems as follows (1) stand alone PC reporting system; (2) linked reporting system with PACS environment; (3) integrated three-dimensional (3D) imaging workstation (WS) with the intranet. We have evaluated the advantages and disadvantages of those three systems, and compared between the reporting system without PACS and network reporting system with PACS. Using linked reporting system with PACS, radiologists could easily reference both previous reports and archived diagnostic images, and also make their teaching files quickly. In conclusion, the reporting system under PACS environment is found to be practical and helpful for Japanese radiologists.

  15. Personal Computer (PC) based image processing applied to fluid mechanics

    Science.gov (United States)

    Cho, Y.-C.; Mclachlan, B. G.

    1987-01-01

    A PC based image processing system was employed to determine the instantaneous velocity field of a two-dimensional unsteady flow. The flow was visualized using a suspension of seeding particles in water, and a laser sheet for illumination. With a finite time exposure, the particle motion was captured on a photograph as a pattern of streaks. The streak pattern was digitized and processed using various imaging operations, including contrast manipulation, noise cleaning, filtering, statistical differencing, and thresholding. Information concerning the velocity was extracted from the enhanced image by measuring the length and orientation of the individual streaks. The fluid velocities deduced from the randomly distributed particle streaks were interpolated to obtain velocities at uniform grid points. For the interpolation a simple convolution technique with an adaptive Gaussian window was used. The results are compared with a numerical prediction by a Navier-Stokes computation.

  16. Page: a program for gamma spectra analysis in PC microcomputers

    International Nuclear Information System (INIS)

    Goncalves, M.A.; Yamaura, M.; Costa, G.J.C.; Carvalho, E.I. de; Matsuda, H.T.; Araujo, B.F. de.

    1991-04-01

    PAGE is a software package, written in BASIC language, to perform gamma spectra analysis. It was developed to be used in a high-purity intrinsic germanium detector-multichannel analyser-PC microcomputer system. The analysis program of PAGE package accomplishes functions as follows: peak location; gamma nuclides identification; activity determination. Standard nuclides sources were used to calibrate the system. To perform the efficiency x energy calibration a logarithmic fit was applied. Analysis of nuclides with overlapping peaks is allowed by PAGE program. PAGE has additional auxiliary programs for: building and list of isotopic nuclear data libraries; data acquisition from multichannel analyser; spectrum display with automatic area and FWHM determinations. This software is to be applied in analytical process control where time response is a very important parameter. PAGE takes ca. 1.5 minutes to analyse a complex spectrum from a 4096 channels MCA. (author)

  17. Pc5 waves generated by substorm injection: a case study

    Directory of Open Access Journals (Sweden)

    N. A. Zolotukhina

    2008-07-01

    Full Text Available We analyzed the spectral-polarized characteristics of Pc5 ULF waves observed on 17 September 2000 after the 03:20:25 UT substorm onset with the satellites GOES 8 and 10 located east and west of the onset location. In the course of the event, the wave polarization changed from mixed (between toroidal and poloidal to poloidal, and then to mixed again. The hodogram of magnetic field oscillations rotated counterclockwise at GOES 8, and clockwise at GOES 10. It is suggested that the satellites detected the waves generated by the substorm injected clouds of the charged particles drifting in the magnetosphere in the opposite azimuthal directions: GOES 8 (located east of the substorm onset detected the wave generated by an electron cloud, and GOES 10 (west of the onset detected the wave generated by a positive ion cloud. This interpretation is confirmed by the energetic particles data recorded by LANL satellites.

  18. METHANE de-NOX FOR UTILITY PC BOILERS

    Energy Technology Data Exchange (ETDEWEB)

    Joseph Rabovitser

    2000-07-05

    The overall project objective is the development and validation of an innovative combustion system, based on a novel coal preheating concept prior to combustion, that can reduce NO{sub x} emissions to 0.15 lb/million Btu or less on utility pulverized coal (PC) boilers. This NO{sub x} reduction should be achieved without loss of boiler efficiency or operating stability, and at more than 25% lower levelized cost than state-of-the-art SCR technology. A further objective is to make this technology ready for full-scale commercial deployment by 2002-2003 in order to meet an anticipated market demand for NO{sub x} reduction technologies resulting from the EPA's NO{sub x} SIP call.

  19. Construction of new quantum MDS codes derived from constacyclic codes

    Science.gov (United States)

    Taneja, Divya; Gupta, Manish; Narula, Rajesh; Bhullar, Jaskaran

    Obtaining quantum maximum distance separable (MDS) codes from dual containing classical constacyclic codes using Hermitian construction have paved a path to undertake the challenges related to such constructions. Using the same technique, some new parameters of quantum MDS codes have been constructed here. One set of parameters obtained in this paper has achieved much larger distance than work done earlier. The remaining constructed parameters of quantum MDS codes have large minimum distance and were not explored yet.

  20. Decoding of concatenated codes with interleaved outer codes

    DEFF Research Database (Denmark)

    Justesen, Jørn; Thommesen, Christian; Høholdt, Tom

    2004-01-01

    Recently Bleichenbacher et al. proposed a decoding algorithm for interleaved Reed/Solomon codes, which allows close to errors to be corrected in many cases. We discuss the application of this decoding algorithm to concatenated codes. (NK) N-K......Recently Bleichenbacher et al. proposed a decoding algorithm for interleaved Reed/Solomon codes, which allows close to errors to be corrected in many cases. We discuss the application of this decoding algorithm to concatenated codes. (NK) N-K...

  1. Decoding of concatenated codes with interleaved outer codes

    DEFF Research Database (Denmark)

    Justesen, Jørn; Høholdt, Tom; Thommesen, Christian

    2004-01-01

    Recently Bleichenbacher et al. proposed a decoding algorithm for interleaved (N, K) Reed-Solomon codes, which allows close to N-K errors to be corrected in many cases. We discuss the application of this decoding algorithm to concatenated codes.......Recently Bleichenbacher et al. proposed a decoding algorithm for interleaved (N, K) Reed-Solomon codes, which allows close to N-K errors to be corrected in many cases. We discuss the application of this decoding algorithm to concatenated codes....

  2. METHANE DE-NOX FOR UTILITY PC BOILERS

    Energy Technology Data Exchange (ETDEWEB)

    Bruce Bryan; Joseph Rabovitser; Serguei Nester; Stan Wohadlo

    2003-07-30

    During the current quarter, pilot-scale testing with the modified air nozzle version of the PC burner was completed with PRB coal at the Riley Power Inc. (RPI) test facility. A total of 8 different burner configurations were tested utilizing various burner air nozzle arrangements in place of the burner air channels. It was found that with the arrangements tested, a stable flame could not be maintained at coal feed rates above 100 lb/h. While it is felt that the air nozzle approach can ultimately be used effectively, in the interest of holding to the current project schedule it was decided to proceed with the balance of the project using the air channel design. The pilot-scale PC burner was therefore restored to the air-channel configuration and benchmark testing with PRB coal to confirmed previous operating results. A series of tests was then conducted with PRB and West Virginia caking coal to evaluate modifications to the gas combustor configuration and operation for improved performance with caking coal. Continuous operation was achieved with caking coal up to 50 lb/h vs. the full load target of 150 lb/h. Impingement and deposition of partially devolatilized coal occurred at various points within the combustor when the caking coal feed was increased above 50 lb/h. The 100 MMBtu/h commercial-scale prototype design was started with coal burner design input from both RPI and VTI. Based on typical burner installation layout considerations, it was that the preheat combustor should be oriented horizontally on the axial centerline of the coal burner. Accordingly, work was begun to relocate the pilot gas combustor to this orientation so that the pilot results with caking coal will be directly applicable to the preferred 100 MMBtu design. Inspection and repair of the 100 MMBtu/h Coal Burner Test Facility (CBTF) was initiated by RPI and as of 6/30, this activity was 70% complete.

  3. Upgrading of analogue gamma cameras with PC based computer system

    International Nuclear Information System (INIS)

    Fidler, V.; Prepadnik, M.

    2002-01-01

    Full text: Dedicated nuclear medicine computers for acquisition and processing of images from analogue gamma cameras in developing countries are in many cases faulty and technologically obsolete. The aim of the upgrading project of International Atomic Energy Agency (IAEA) was to support the development of the PC based computer system which would cost 5.000 $ in total. Several research institutions from different countries (China, Cuba, India and Slovenia) were financially supported in this development. The basic demands for the system were: one acquisition card an ISA bus, image resolution up to 256x256, SVGA graphics, low count loss at high count rates, standard acquisition and clinical protocols incorporated in PIP (Portable Image Processing), on-line energy and uniformity correction, graphic printing and networking. The most functionally stable acquisition system tested on several international workshops and university clinics was the Slovenian one with a complete set of acquisition and clinical protocols, transfer of scintigraphic data from acquisition card to PC through PORT, count loss less than 1 % at count rate of 120 kc/s, improvement of integral uniformity index by a factor of 3-5 times, reporting, networking and archiving solutions for simple MS network or server oriented network systems (NT server, etc). More than 300 gamma cameras in 52 countries were digitized and put in the routine work. The project of upgrading the analogue gamma cameras yielded a high promotion of nuclear medicine in the developing countries by replacing the old computer systems, improving the technological knowledge of end users on workshops and training courses and lowering the maintenance cost of the departments. (author)

  4. An improved PC based TL reader for research applications

    International Nuclear Information System (INIS)

    Ratna, P.; Gaikwad, N.P.; More, V.S.; Kulkarni, M.S.

    2008-01-01

    A new improved PC based TL Reader for its applications in routine dosimetry and research is described. The reader can generate glow curves both time versus TL response and temperature versus TL response with an overall reproducibility of ± 1 %. Here the main thing is design of a linear temperature controller capable of (± 0.5 %) reproducing a selected linear heating rate (0.5 - 60 deg C/s) up to a clamping temperature (500 deg C). Some of the limitations faced in the earlier versions of TL reader for dosimetry have been improved in this system. In the earlier versions, temperature can be clamped only up to 400 deg C and heating rate can be selected up to 35 deg C/s. It is a PC based instrument, where parameters like heating rate, end point temperature, EHT, cycle time etc can be entered and stored in the memory of the microcontroller IC. Phosphors can be in the form of powder, disc, tape etc. When the sample (in the powder form) is loaded on the kanthal heater directly, spilIage of the powder inside the drawer assembly takes place. This leads to the collection of the powder inside the drawer assembly. A small removable sample tray is designed using the same material (kanthal) to avoid the spillage of the sample powder. An elaborate study was carried to find out the lag in temperature when the sample is loaded on the tray and results were compared with the sample directly on the heater. To evaluate the performance of the reader for higher temperature, glow curves were taken for some new phosphors whose glow peaks were above 350 deg C. (author)

  5. Disk-based k-mer counting on a PC.

    Science.gov (United States)

    Deorowicz, Sebastian; Debudaj-Grabysz, Agnieszka; Grabowski, Szymon

    2013-05-16

    The k-mer counting problem, which is to build the histogram of occurrences of every k-symbol long substring in a given text, is important for many bioinformatics applications. They include developing de Bruijn graph genome assemblers, fast multiple sequence alignment and repeat detection. We propose a simple, yet efficient, parallel disk-based algorithm for counting k-mers. Experiments show that it usually offers the fastest solution to the considered problem, while demanding a relatively small amount of memory. In particular, it is capable of counting the statistics for short-read human genome data, in input gzipped FASTQ file, in less than 40 minutes on a PC with 16 GB of RAM and 6 CPU cores, and for long-read human genome data in less than 70 minutes. On a more powerful machine, using 32 GB of RAM and 32 CPU cores, the tasks are accomplished in less than half the time. No other algorithm for most tested settings of this problem and mammalian-size data can accomplish this task in comparable time. Our solution also belongs to memory-frugal ones; most competitive algorithms cannot efficiently work on a PC with 16 GB of memory for such massive data. By making use of cheap disk space and exploiting CPU and I/O parallelism we propose a very competitive k-mer counting procedure, called KMC. Our results suggest that judicious resource management may allow to solve at least some bioinformatics problems with massive data on a commodity personal computer.

  6. low bit rate video coding low bit rate video coding

    African Journals Online (AJOL)

    eobe

    Variable length bit rate (VLBR) ariable length bit rate (VLBR) ariable length bit rate (VLBR) broadly encompasses video coding which broadly encompasses video coding which broadly encompasses video coding which mandates a temporal frequency of 10 mandates a temporal frequency of 10 frames per frames per ...

  7. Code Flows : Visualizing Structural Evolution of Source Code

    NARCIS (Netherlands)

    Telea, Alexandru; Auber, David

    2008-01-01

    Understanding detailed changes done to source code is of great importance in software maintenance. We present Code Flows, a method to visualize the evolution of source code geared to the understanding of fine and mid-level scale changes across several file versions. We enhance an existing visual

  8. The Tap code - a code similar to Morse code for communication by tapping

    OpenAIRE

    Rafler, Stephan

    2013-01-01

    A code is presented for fast, easy and efficient communication over channels that allow only two signal types: a single sound (e.g. a knock), or no sound (i.e. silence). This is a true binary code while Morse code is a ternary code and does not work in such situations. Thus the presented code is more universal than Morse and can be used in much more situations. Additionally it is very tolerant to variations in signal strength or duration. The paper contains various ways in which the code can ...

  9. Overview of codes and tools for nuclear engineering education

    Science.gov (United States)

    Yakovlev, D.; Pryakhin, A.; Medvedeva, L.

    2017-01-01

    The recent world trends in nuclear education have been developed in the direction of social education, networking, virtual tools and codes. MEPhI as a global leader on the world education market implements new advanced technologies for the distance and online learning and for student research work. MEPhI produced special codes, tools and web resources based on the internet platform to support education in the field of nuclear technology. At the same time, MEPhI actively uses codes and tools from the third parties. Several types of the tools are considered: calculation codes, nuclear data visualization tools, virtual labs, PC-based educational simulators for nuclear power plants (NPP), CLP4NET, education web-platforms, distance courses (MOOCs and controlled and managed content systems). The university pays special attention to integrated products such as CLP4NET, which is not a learning course, but serves to automate the process of learning through distance technologies. CLP4NET organizes all tools in the same information space. Up to now, MEPhI has achieved significant results in the field of distance education and online system implementation.

  10. Quick response codes in Orthodontics

    Directory of Open Access Journals (Sweden)

    Moidin Shakil

    2015-01-01

    Full Text Available Quick response (QR code codes are two-dimensional barcodes, which encodes for a large amount of information. QR codes in Orthodontics are an innovative approach in which patient details, radiographic interpretation, and treatment plan can be encoded. Implementing QR code in Orthodontics will save time, reduces paperwork, and minimizes manual efforts in storage and retrieval of patient information during subsequent stages of treatment.

  11. Bar codes for nuclear safeguards

    International Nuclear Information System (INIS)

    Keswani, A.N.; Bieber, A.M. Jr.

    1983-01-01

    Bar codes similar to those used in supermarkets can be used to reduce the effort and cost of collecting nuclear materials accountability data. A wide range of equipment is now commercially available for printing and reading bar-coded information. Several examples of each of the major types of commercially available equipment are given, and considerations are discussed both for planning systems using bar codes and for choosing suitable bar code equipment

  12. The CORSYS neutronics code system

    International Nuclear Information System (INIS)

    Caner, M.; Krumbein, A.D.; Saphier, D.; Shapira, M.

    1994-01-01

    The purpose of this work is to assemble a code package for LWR core physics including coupled neutronics, burnup and thermal hydraulics. The CORSYS system is built around the cell code WIMS (for group microscopic cross section calculations) and 3-dimension diffusion code CITATION (for burnup and fuel management). We are implementing such a system on an IBM RS-6000 workstation. The code was rested with a simplified model of the Zion Unit 2 PWR. (authors). 6 refs., 8 figs., 1 tabs

  13. The path of code linting

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    Join the path of code linting and discover how it can help you reach higher levels of programming enlightenment. Today we will cover how to embrace code linters to offload cognitive strain on preserving style standards in your code base as well as avoiding error-prone constructs. Additionally, I will show you the journey ahead for integrating several code linters in the programming tools your already use with very little effort.

  14. The FLIC conversion codes

    International Nuclear Information System (INIS)

    Basher, J.C.

    1965-05-01

    This report describes the FORTRAN programmes, FLIC 1 and FLIC 2. These programmes convert programmes coded in one dialect of FORTRAN to another dialect of the same language. FLIC 1 is a general pattern recognition and replacement programme whereas FLIC 2 contains extensions directed towards the conversion of FORTRAN II and S2 programmes to EGTRAN 1 - the dialect now in use on the Winfrith KDF9. FII or S2 statements are replaced where possible by their E1 equivalents; other statements which may need changing are flagged. (author)

  15. Physical Layer Network Coding

    OpenAIRE

    Shengli, Zhang; Liew, Soung-Chang; Lam, Patrick P. K.

    2007-01-01

    A main distinguishing feature of a wireless network compared with a wired network is its broadcast nature, in which the signal transmitted by a node may reach several other nodes, and a node may receive signals from several other nodes simultaneously. Rather than a blessing, this feature is treated more as an interference-inducing nuisance in most wireless networks today (e.g., IEEE 802.11). This paper shows that the concept of network coding can be applied at the physical layer to turn the b...

  16. Code Generation with Templates

    CERN Document Server

    Arnoldus, Jeroen; Serebrenik, A

    2012-01-01

    Templates are used to generate all kinds of text, including computer code. The last decade, the use of templates gained a lot of popularity due to the increase of dynamic web applications. Templates are a tool for programmers, and implementations of template engines are most times based on practical experience rather than based on a theoretical background. This book reveals the mathematical background of templates and shows interesting findings for improving the practical use of templates. First, a framework to determine the necessary computational power for the template metalanguage is presen

  17. Cinder begin creative coding

    CERN Document Server

    Rijnieks, Krisjanis

    2013-01-01

    Presented in an easy to follow, tutorial-style format, this book will lead you step-by-step through the multi-faceted uses of Cinder.""Cinder: Begin Creative Coding"" is for people who already have experience in programming. It can serve as a transition from a previous background in Processing, Java in general, JavaScript, openFrameworks, C++ in general or ActionScript to the framework covered in this book, namely Cinder. If you like quick and easy to follow tutorials that will let yousee progress in less than an hour - this book is for you. If you are searching for a book that will explain al

  18. Study of intergranular precipitation in Al 6.8 pc at. Zn and Al 12.1 pc at. Zn

    International Nuclear Information System (INIS)

    Bouzaher, Abdallah

    1981-01-01

    As the homogeneous decomposition of alloys with structural hardening is generally accompanied by an heterogeneous precipitation on defects such as dislocations, grain boundaries, and so on, this research thesis reports the study of intergranular precipitation in a Al Zn alloy (Al 15 pc wt.Zn and Al 25 oc wt.Zn) by using transmission electronic microscopy for a local and direct observation of precipitation at grain boundaries. Moreover, possibilities of diffraction of present phases allow their structures and possible epitaxies to be determined. This technique also allows grain boundaries to be analysed and their parameters to be determined. In order to study bare areas and boundary migration, scanning electronic microscopy has been used on massive samples, and X ray analysis has been used on thin ones

  19. Order functions and evaluation codes

    DEFF Research Database (Denmark)

    Høholdt, Tom; Pellikaan, Ruud; van Lint, Jack

    1997-01-01

    Based on the notion of an order function we construct and determine the parameters of a class of error-correcting evaluation codes. This class includes the one-point algebraic geometry codes as wella s the generalized Reed-Muller codes and the parameters are detremined without using the heavy...... machinery of algebraic geometry....

  20. Network Coding Over The 232

    DEFF Research Database (Denmark)

    Pedersen, Morten Videbæk; Heide, Janus; Vingelmann, Peter

    2013-01-01

    Creating efficient finite field implementations has been an active research topic for several decades. Many appli- cations in areas such as cryptography, signal processing, erasure coding and now also network coding depend on this research to deliver satisfactory performance. In this paper we...... will be useful in many network coding applications where large field sizes are required....

  1. Sub-Transport Layer Coding

    DEFF Research Database (Denmark)

    Hansen, Jonas; Krigslund, Jeppe; Roetter, Daniel Enrique Lucani

    2014-01-01

    oblivious to the congestion control algorithms of the utilised transport layer protocol. Although our coding shim is indifferent towards the transport layer protocol, we focus on the performance of TCP when ran on top of our proposed coding mechanism due to its widespread use. The coding shim provides gains...

  2. Strongly-MDS convolutional codes

    NARCIS (Netherlands)

    Gluesing-Luerssen, H; Rosenthal, J; Smarandache, R

    Maximum-distance separable (MDS) convolutional codes have the property that their free distance is maximal among all codes of the same rate and the same degree. In this paper, a class of MDS convolutional codes is introduced whose column distances reach the generalized Singleton bound at the

  3. Geochemical computer codes. A review

    International Nuclear Information System (INIS)

    Andersson, K.

    1987-01-01

    In this report a review of available codes is performed and some code intercomparisons are also discussed. The number of codes treating natural waters (groundwater, lake water, sea water) is large. Most geochemical computer codes treat equilibrium conditions, although some codes with kinetic capability are available. A geochemical equilibrium model consists of a computer code, solving a set of equations by some numerical method and a data base, consisting of thermodynamic data required for the calculations. There are some codes which treat coupled geochemical and transport modeling. Some of these codes solve the equilibrium and transport equations simultaneously while other solve the equations separately from each other. The coupled codes require a large computer capacity and have thus as yet limited use. Three code intercomparisons have been found in literature. It may be concluded that there are many codes available for geochemical calculations but most of them require a user that us quite familiar with the code. The user also has to know the geochemical system in order to judge the reliability of the results. A high quality data base is necessary to obtain a reliable result. The best results may be expected for the major species of natural waters. For more complicated problems, including trace elements, precipitation/dissolution, adsorption, etc., the results seem to be less reliable. (With 44 refs.) (author)

  4. Authorship Attribution of Source Code

    Science.gov (United States)

    Tennyson, Matthew F.

    2013-01-01

    Authorship attribution of source code is the task of deciding who wrote a program, given its source code. Applications include software forensics, plagiarism detection, and determining software ownership. A number of methods for the authorship attribution of source code have been presented in the past. A review of those existing methods is…

  5. Creating Security System Models Using SNAP-PC.

    Science.gov (United States)

    1987-05-01

    pointeruss N I Do you wish to define branches? NOIA I Enter SAVE to save current values, QUIT to exit without saving:’ :. f iTo Choi ce -Help Figure...Brigade Department of the Army ATTN: AEUSA-Z (1) SURETY (1) APO New York 09189 Commander David Taylor Naval Ship R&D Center ATTN: CODE 1203 Bethesda, MD

  6. Accelerated 3D-OSEM image reconstruction using a Beowulf PC cluster for pinhole SPECT.

    Science.gov (United States)

    Zeniya, Tsutomu; Watabe, Hiroshi; Sohlberg, Antti; Iida, Hidehiro

    2007-11-01

    A conventional pinhole single-photon emission computed tomography (SPECT) with a single circular orbit has limitations associated with non-uniform spatial resolution or axial blurring. Recently, we demonstrated that three-dimensional (3D) images with uniform spatial resolution and no blurring can be obtained by complete data acquired using two-circular orbit, combined with the 3D ordered subsets expectation maximization (OSEM) reconstruction method. However, a long computation time is required to obtain the reconstruction image, because of the fact that 3D-OSEM is an iterative method and two-orbit acquisition doubles the size of the projection data. To reduce the long reconstruction time, we parallelized the two-orbit pinhole 3D-OSEM reconstruction process by using a Beowulf personal computer (PC) cluster. The Beowulf PC cluster consists of seven PCs connected to Gbit Ethernet switches. Message passing interface protocol was utilized for parallelizing the reconstruction process. The projection data in a subset are distributed to each PC. The partial image forward- and back-projected in each PC is transferred to all PCs. The current image estimate on each PC is updated after summing the partial images. The performance of parallelization on the PC cluster was evaluated using two independent projection data sets acquired by a pinhole SPECT system with two different circular orbits. Parallelization using the PC cluster improved the reconstruction time with increasing number of PCs. The reconstruction time of 54 min by the single PC was decreased to 10 min when six or seven PCs were used. The speed-up factor was 5.4. The reconstruction image by the PC cluster was virtually identical with that by the single PC. Parallelization of 3D-OSEM reconstruction for pinhole SPECT using the PC cluster can significantly reduce the computation time, whereas its implementation is simple and inexpensive.

  7. Accelerated 3D-OSEM image reconstruction using a Beowulf PC cluster for pinhole SPECT

    International Nuclear Information System (INIS)

    Zeniya, Tsutomu; Watabe, Hiroshi; Sohlberg, Antti; Iida, Hidehiro

    2007-01-01

    A conventional pinhole single-photon emission computed tomography (SPECT) with a single circular orbit has limitations associated with non-uniform spatial resolution or axial blurring. Recently, we demonstrated that three-dimensional (3D) images with uniform spatial resolution and no blurring can be obtained by complete data acquired using two-circular orbit, combined with the 3D ordered subsets expectation maximization (OSEM) reconstruction method. However, a long computation time is required to obtain the reconstruction image, because of the fact that 3D-OSEM is an iterative method and two-orbit acquisition doubles the size of the projection data. To reduce the long reconstruction time, we parallelized the two-orbit pinhole 3D-OSEM reconstruction process by using a Beowulf personal computer (PC) cluster. The Beowulf PC cluster consists of seven PCs connected to Gbit Ethernet switches. Message passing interface protocol was utilized for parallelizing the reconstruction process. The projection data in a subset are distributed to each PC. The partial image forward-and back-projected in each PC is transferred to all PCs. The current image estimate on each PC is updated after summing the partial images. The performance of parallelization on the PC cluster was evaluated using two independent projection data sets acquired by a pinhole SPECT system with two different circular orbits. Parallelization using the PC cluster improved the reconstruction time with increasing number of PCs. The reconstruction time of 54 min by the single PC was decreased to 10 min when six or seven PCs were used. The speed-up factor was 5.4. The reconstruction image by the PC cluster was virtually identical with that by the single PC. Parallelization of 3D-OSEM reconstruction for pinhole SPECT using the PC cluster can significantly reduce the computation time, whereas its implementation is simple and inexpensive. (author)

  8. Separate Turbo Code and Single Turbo Code Adaptive OFDM Transmissions

    Directory of Open Access Journals (Sweden)

    Burr Alister

    2009-01-01

    Full Text Available Abstract This paper discusses the application of adaptive modulation and adaptive rate turbo coding to orthogonal frequency-division multiplexing (OFDM, to increase throughput on the time and frequency selective channel. The adaptive turbo code scheme is based on a subband adaptive method, and compares two adaptive systems: a conventional approach where a separate turbo code is used for each subband, and a single turbo code adaptive system which uses a single turbo code over all subbands. Five modulation schemes (BPSK, QPSK, 8AMPM, 16QAM, and 64QAM are employed and turbo code rates considered are and . The performances of both systems with high ( and low ( BER targets are compared. Simulation results for throughput and BER show that the single turbo code adaptive system provides a significant improvement.

  9. Separate Turbo Code and Single Turbo Code Adaptive OFDM Transmissions

    Directory of Open Access Journals (Sweden)

    Lei Ye

    2009-01-01

    Full Text Available This paper discusses the application of adaptive modulation and adaptive rate turbo coding to orthogonal frequency-division multiplexing (OFDM, to increase throughput on the time and frequency selective channel. The adaptive turbo code scheme is based on a subband adaptive method, and compares two adaptive systems: a conventional approach where a separate turbo code is used for each subband, and a single turbo code adaptive system which uses a single turbo code over all subbands. Five modulation schemes (BPSK, QPSK, 8AMPM, 16QAM, and 64QAM are employed and turbo code rates considered are 1/2 and 1/3. The performances of both systems with high (10−2 and low (10−4 BER targets are compared. Simulation results for throughput and BER show that the single turbo code adaptive system provides a significant improvement.

  10. Quantum Codes From Cyclic Codes Over The Ring R 2

    International Nuclear Information System (INIS)

    Altinel, Alev; Güzeltepe, Murat

    2016-01-01

    Let R 2 denotes the ring F 2 + μF 2 + υ 2 + μυ F 2 + wF 2 + μwF 2 + υwF 2 + μυwF 2 . In this study, we construct quantum codes from cyclic codes over the ring R 2 , for arbitrary length n, with the restrictions μ 2 = 0, υ 2 = 0, w 2 = 0, μυ = υμ, μw = wμ, υw = wυ and μ (υw) = (μυ) w. Also, we give a necessary and sufficient condition for cyclic codes over R 2 that contains its dual. As a final point, we obtain the parameters of quantum error-correcting codes from cyclic codes over R 2 and we give an example of quantum error-correcting codes form cyclic codes over R 2 . (paper)

  11. Preliminary study for unified management of CANDU safety codes and construction of database system

    International Nuclear Information System (INIS)

    Min, Byung Joo; Kim, Hyoung Tae

    2003-03-01

    It is needed to develop the Graphical User Interface(GUI) for the unified management of CANDU safety codes and to construct database system for the validation of safety codes, for which the preliminary study is done in the first stage of the present work. The input and output structures and data flow of CATHENA and PRESCON2 are investigated and the interaction of the variables between CATHENA and PRESCON2 are identified. Furthermore, PC versions of CATHENA and PRESCON2 codes are developed for the interaction of these codes and GUI(Graphic User Interface). The PC versions are assessed by comparing the calculation results with those by HP workstation or from FSAR(Final Safety Analysis Report). Preliminary study on the GUI for the safety codes in the unified management system are done. The sample of GUI programming is demonstrated preliminarily. Visual C++ is selected as the programming language for the development of GUI system. The data for Wolsong plants, reactor core, and thermal-hydraulic experiments executed in the inside and outside of the country, are collected and classified following the structure of the database system, of which two types are considered for the final web-based database system. The preliminary GUI programming for database system is demonstrated, which is updated in the future work

  12. Genetic code for sine

    Science.gov (United States)

    Abdullah, Alyasa Gan; Wah, Yap Bee

    2015-02-01

    The computation of the approximate values of the trigonometric sines was discovered by Bhaskara I (c. 600-c.680), a seventh century Indian mathematician and is known as the Bjaskara's I's sine approximation formula. The formula is given in his treatise titled Mahabhaskariya. In the 14th century, Madhava of Sangamagrama, a Kerala mathematician astronomer constructed the table of trigonometric sines of various angles. Madhava's table gives the measure of angles in arcminutes, arcseconds and sixtieths of an arcsecond. The search for more accurate formulas led to the discovery of the power series expansion by Madhava of Sangamagrama (c.1350-c. 1425), the founder of the Kerala school of astronomy and mathematics. In 1715, the Taylor series was introduced by Brook Taylor an English mathematician. If the Taylor series is centered at zero, it is called a Maclaurin series, named after the Scottish mathematician Colin Maclaurin. Some of the important Maclaurin series expansions include trigonometric functions. This paper introduces the genetic code of the sine of an angle without using power series expansion. The genetic code using square root approach reveals the pattern in the signs (plus, minus) and sequence of numbers in the sine of an angle. The square root approach complements the Pythagoras method, provides a better understanding of calculating an angle and will be useful for teaching the concepts of angles in trigonometry.

  13. Supervised Transfer Sparse Coding

    KAUST Repository

    Al-Shedivat, Maruan

    2014-07-27

    A combination of the sparse coding and transfer learn- ing techniques was shown to be accurate and robust in classification tasks where training and testing objects have a shared feature space but are sampled from differ- ent underlying distributions, i.e., belong to different do- mains. The key assumption in such case is that in spite of the domain disparity, samples from different domains share some common hidden factors. Previous methods often assumed that all the objects in the target domain are unlabeled, and thus the training set solely comprised objects from the source domain. However, in real world applications, the target domain often has some labeled objects, or one can always manually label a small num- ber of them. In this paper, we explore such possibil- ity and show how a small number of labeled data in the target domain can significantly leverage classifica- tion accuracy of the state-of-the-art transfer sparse cod- ing methods. We further propose a unified framework named supervised transfer sparse coding (STSC) which simultaneously optimizes sparse representation, domain transfer and classification. Experimental results on three applications demonstrate that a little manual labeling and then learning the model in a supervised fashion can significantly improve classification accuracy.

  14. Expression and localization of prohormone convertase PC1 in the calcitonin-producing cells of the bullfrog ultimobranchial gland.

    Science.gov (United States)

    Yaoi, Yuichi; Suzuki, Masakazu; Tomura, Hideaki; Kurabuchi, Shingo; Sasayama, Yuichi; Tanaka, Shigeyasu

    2003-11-01

    We examined the expression and localization of the prohormone convertases, PC1 and PC2, in the ultimobranchial gland of the adult bullfrog using immunohistochemical (IHC) and in situ hybridization (ISH) techniques. In the ultimobranchial gland, PC1-immunoreactive cells were columnar, and were present in the follicular epithelium. When serial sections were immunostained with anti-calcitonin, anti-CGRP, anti-PC1, and anti-PC2 sera, PC1 was found only in the calcitonin/CGRP-producing cells. No PC2-immunopositive cells were detected. In the ISH, PC1 mRNA-positive cells were detected in the follicle cells in the ultimobranchial gland. No PC2 mRNA-positive cells were detected. RT-PCR revealed expression of the mRNAs of PC1 and the PC2 in the ultimobranchial gland. However, very little of the PC2 mRNA is probably translated because no PC2 protein was detected either by IHC staining or by Western blotting analysis. We conclude that the main prohormone convertase that is involved in the proteolytic cleavage of procalcitonin in the bullfrog is PC1.

  15. High performance computer code for molecular dynamics simulations

    International Nuclear Information System (INIS)

    Levay, I.; Toekesi, K.

    2007-01-01

    Complete text of publication follows. Molecular Dynamics (MD) simulation is a widely used technique for modeling complicated physical phenomena. Since 2005 we are developing a MD simulations code for PC computers. The computer code is written in C++ object oriented programming language. The aim of our work is twofold: a) to develop a fast computer code for the study of random walk of guest atoms in Be crystal, b) 3 dimensional (3D) visualization of the particles motion. In this case we mimic the motion of the guest atoms in the crystal (diffusion-type motion), and the motion of atoms in the crystallattice (crystal deformation). Nowadays, it is common to use Graphics Devices in intensive computational problems. There are several ways to use this extreme processing performance, but never before was so easy to programming these devices as now. The CUDA (Compute Unified Device) Architecture introduced by nVidia Corporation in 2007 is a very useful for every processor hungry application. A Unified-architecture GPU include 96-128, or more stream processors, so the raw calculation performance is 576(!) GFLOPS. It is ten times faster, than the fastest dual Core CPU [Fig.1]. Our improved MD simulation software uses this new technology, which speed up our software and the code run 10 times faster in the critical calculation code segment. Although the GPU is a very powerful tool, it has a strongly paralleled structure. It means, that we have to create an algorithm, which works on several processors without deadlock. Our code currently uses 256 threads, shared and constant on-chip memory, instead of global memory, which is 100 times slower than others. It is possible to implement the total algorithm on GPU, therefore we do not need to download and upload the data in every iteration. On behalf of maximal throughput, every thread run with the same instructions

  16. Continuous Non-malleable Codes

    DEFF Research Database (Denmark)

    Faust, Sebastian; Mukherjee, Pratyay; Nielsen, Jesper Buus

    2014-01-01

    Non-malleable codes are a natural relaxation of error correcting/ detecting codes that have useful applications in the context of tamper resilient cryptography. Informally, a code is non-malleable if an adversary trying to tamper with an encoding of a given message can only leave it unchanged or ...... applications of non-malleable codes in this setting required to perfectly erase the entire memory after each execution and required the adversary to be restricted in memory. We show that continuous non-malleable codes avoid these restrictions....

  17. The Art of Readable Code

    CERN Document Server

    Boswell, Dustin

    2011-01-01

    As programmers, we've all seen source code that's so ugly and buggy it makes our brain ache. Over the past five years, authors Dustin Boswell and Trevor Foucher have analyzed hundreds of examples of "bad code" (much of it their own) to determine why they're bad and how they could be improved. Their conclusion? You need to write code that minimizes the time it would take someone else to understand it-even if that someone else is you. This book focuses on basic principles and practical techniques you can apply every time you write code. Using easy-to-digest code examples from different languag

  18. Physical and Mechanical Characteristics of Kevlar Fiber-Reinforced PC/ABS Composites

    Directory of Open Access Journals (Sweden)

    Kuljira Sujirote

    2012-01-01

    Full Text Available In this research, the composites between polycarbonate (PC and acrylonitrile-butadiene-styrene (ABS alloy and Kevlar fiber were prepared. The flexural and tensile properties of PC/ABS alloy and its composites were determined using a universal testing machine. The synergistic behavior of flexural modulus was observed for all regions of PC contents, while the synergism of flexural strength and tensile strength were found in some PC contents. It was found that the optimum weight ratio of PC:ABS was 60:40. In the Kevlar Fiber-reinforced PC/ABS composite system at PC:ABS of 60:40, both flexural modulus and strength were increased with matrix contents. Additionally, the flexural strength drastically increased with the matrix content and then reached the maximum value of 167 MPa at the matrix content of 33.4 wt%. The results from peel test, water contact measurement, and scanning electron microscopy (SEM reveal that the interfacial adhesion between the Kevlar fiber and the polymer matrix could be improved by increasing the PC content in the matrix.

  19. The UV (IUE) spectrum of the planetary nebula PC 11 (HD 149427)

    NARCIS (Netherlands)

    Parthasarathy, M; Garcia-Lario, P; Pottasch, [No Value; de Martino, D; Surendiranath, R

    The UV spectrum of PC 11 is found to show variations in the strength of the O III] 1666 Angstrom, N III] 1750 Angstrom and C III] 1909 Angstrom emission lines. The detection of continuum emission in the wavelength interval 2650 Angstrom to 3200 Angstrom indicates that the central star of PC 11 has

  20. Application of PC-CREAM in the Netherlands - Dose impact due to atmospheric releases

    NARCIS (Netherlands)

    Eleveld H; Twenhofel CJW; Pruppers MJM; LSO

    1999-01-01

    CREAM, een model om de radiologische consequenties van reguliere lozingen te bepalen, is ontwikkeld door National Radiological Protection Board (UK). PC-CREAM, de PC-implementatie van het model, is vergeleken met de Nederlandse richtlijn. Voor twee specifieke referentiesituaties en elf natuurlijk

  1. 76 FR 39473 - Proposed Collection; Comment Request for Form 1120-PC

    Science.gov (United States)

    2011-07-06

    ... Reduction Act of 1995, Public Law 104-13 (44 U.S.C. 3506(c)(2)(A)). Currently, the IRS is soliciting comments concerning Form 1120-PC, U.S. Property and Casualty Insurance Company Income Tax Return. DATES... Casualty Insurance Company Income Tax Return. OMB Number: 1545-1027. Form Number: Form 1120-PC. Abstract...

  2. Elements of algebraic coding systems

    CERN Document Server

    Cardoso da Rocha, Jr, Valdemar

    2014-01-01

    Elements of Algebraic Coding Systems is an introductory text to algebraic coding theory. In the first chapter, you'll gain inside knowledge of coding fundamentals, which is essential for a deeper understanding of state-of-the-art coding systems. This book is a quick reference for those who are unfamiliar with this topic, as well as for use with specific applications such as cryptography and communication. Linear error-correcting block codes through elementary principles span eleven chapters of the text. Cyclic codes, some finite field algebra, Goppa codes, algebraic decoding algorithms, and applications in public-key cryptography and secret-key cryptography are discussed, including problems and solutions at the end of each chapter. Three appendices cover the Gilbert bound and some related derivations, a derivation of the Mac- Williams' identities based on the probability of undetected error, and two important tools for algebraic decoding-namely, the finite field Fourier transform and the Euclidean algorithm f...

  3. Introduction of SCIENCE code package

    International Nuclear Information System (INIS)

    Lu Haoliang; Li Jinggang; Zhu Ya'nan; Bai Ning

    2012-01-01

    The SCIENCE code package is a set of neutronics tools based on 2D assembly calculations and 3D core calculations. It is made up of APOLLO2F, SMART and SQUALE and used to perform the nuclear design and loading pattern analysis for the reactors on operation or under construction of China Guangdong Nuclear Power Group. The purpose of paper is to briefly present the physical and numerical models used in each computation codes of the SCIENCE code pack age, including the description of the general structure of the code package, the coupling relationship of APOLLO2-F transport lattice code and SMART core nodal code, and the SQUALE code used for processing the core maps. (authors)

  4. Seismic Analysis Code (SAC): Development, porting, and maintenance within a legacy code base

    Science.gov (United States)

    Savage, B.; Snoke, J. A.

    2017-12-01

    The Seismic Analysis Code (SAC) is the result of toil of many developers over almost a 40-year history. Initially a Fortran-based code, it has undergone major transitions in underlying bit size from 16 to 32, in the 1980s, and 32 to 64 in 2009; as well as a change in language from Fortran to C in the late 1990s. Maintenance of SAC, the program and its associated libraries, have tracked changes in hardware and operating systems including the advent of Linux in the early 1990, the emergence and demise of Sun/Solaris, variants of OSX processors (PowerPC and x86), and Windows (Cygwin). Traces of these systems are still visible in source code and associated comments. A major concern while improving and maintaining a routinely used, legacy code is a fear of introducing bugs or inadvertently removing favorite features of long-time users. Prior to 2004, SAC was maintained and distributed by LLNL (Lawrence Livermore National Lab). In that year, the license was transferred from LLNL to IRIS (Incorporated Research Institutions for Seismology), but the license is not open source. However, there have been thousands of downloads a year of the package, either source code or binaries for specific system. Starting in 2004, the co-authors have maintained the SAC package for IRIS. In our updates, we fixed bugs, incorporated newly introduced seismic analysis procedures (such as EVALRESP), added new, accessible features (plotting and parsing), and improved the documentation (now in HTML and PDF formats). Moreover, we have added modern software engineering practices to the development of SAC including use of recent source control systems, high-level tests, and scripted, virtualized environments for rapid testing and building. Finally, a "sac-help" listserv (administered by IRIS) was setup for SAC-related issues and is the primary avenue for users seeking advice and reporting bugs. Attempts are always made to respond to issues and bugs in a timely fashion. For the past thirty-plus years

  5. Reuse of the compact nuclear simulator software under PC with Linux

    International Nuclear Information System (INIS)

    Cha, K. H.; Park, J. C.; Kwon, K. C.; Lee, G. Y.

    2000-01-01

    This study was approached to reuse source programs for a nuclear simulator under PC with Open Source Software(OSS) and to extend its applicability. Source programs in the Compact Nuclear Simulator(CNS), which has been operated for institutional research and training in KAERI, were reused and implemented for Linux-PC environment with the aim of supporting the study. PC with 500 MHz processor and Linux 2.2.5-22 kernel were utilized for the reuse implementation and it was investigated for some applications, through the functional testing for its main functions as interfaced with compact control panels in the current CNS. Development and upgrade of small-scale simulators, establishment of process simulation for PC, and development of prototype predictive simulation, can effectively be enabled with the experience though the reuse implementation was limited to port only CNS programs for PC with Linux

  6. Model of Oxygen and Glucose Deprivation in PC12 Cells and Detection of HSP70 Protein

    Science.gov (United States)

    He, Jinting; Yang, Le; Shao, Yankun

    2018-01-01

    Objective: PC12 cell was used to set up a ischemia model by OGD and detected HSP70 protein. Methods: Use of PC12 cells induced by NGF stimulation into nerve cells, oxygen and glucose deprivation to build the nerve cells of oxygen and glucose deprivation model; using Western blot analysis of PC12 cells into neuron-like cells and oxygen-glucose deprivation model established. Results: The application of a final concentration of 50 ng / ml of NGF in DMEM complete mediumPC12 cells showed a typical neuronal morphology with the increase in cell culture time. NGF culture time showed a positive correlation, the establishment of oxygen and glucose deprivation (OGD) training environment, the OGD after nerve element appears different degrees of damage, OGD can effectively induce the expression of HSP70. Conclusion: PC12 cell transformed into cells by NGF; the cell model of OGD was established.

  7. Photodynamic Therapy with the Silicon Phthalocyanine Pc 4 Induces Apoptosis in Mycosis Fungoides and Sezary Syndrome

    Directory of Open Access Journals (Sweden)

    Minh Lam

    2010-01-01

    Full Text Available Our current focus on the effects of Photodynamic Therapy (PDT using silicon phthalocyanine Pc 4 photosensitizer on malignant T lymphocytes arose due to preclinical observations that Jurkat cells, common surrogate for human T cell lymphoma, were more sensitive to Pc 4-PDT-induced killing than epidermoid carcinoma A431 cells. Mycosis fungoides (MF as well as Sezary syndrome (SS are variants of cutaneous T-cell lymphoma (CTCL in which malignant T-cells invade the epidermis. In this study, we investigated the cytotoxicity of Pc 4-PDT in peripheral blood cells obtained from patients with SS and in skin biopsies of patients with MF. Our data suggest that Pc 4-PDT preferentially induces apoptosis of CD4+CD7− malignant T-lymphocytes in the blood relative to CD11b+ monocytes and nonmalignant T-cells. In vivo Pc 4-PDT of MF skin also photodamages the antiapoptotic protein Bcl-2.

  8. Photodynamic Therapy with the Silicon Phthalocyanine Pc 4 Induces Apoptosis in Mycosis Fungoides and Sezary Syndrome

    Science.gov (United States)

    Lam, Minh; Lee, YooJin; Deng, Min; Hsia, Andrew H.; Morrissey, Kelly A.; Yan, Chunlin; Azzizudin, Kashif; Oleinick, Nancy L.; McCormick, Thomas S.; Cooper, Kevin D.; Baron, Elma D.

    2010-01-01

    Our current focus on the effects of Photodynamic Therapy (PDT) using silicon phthalocyanine Pc 4 photosensitizer on malignant T lymphocytes arose due to preclinical observations that Jurkat cells, common surrogate for human T cell lymphoma, were more sensitive to Pc 4-PDT-induced killing than epidermoid carcinoma A431 cells. Mycosis fungoides (MF) as well as Sezary syndrome (SS) are variants of cutaneous T-cell lymphoma (CTCL) in which malignant T-cells invade the epidermis. In this study, we investigated the cytotoxicity of Pc 4-PDT in peripheral blood cells obtained from patients with SS and in skin biopsies of patients with MF. Our data suggest that Pc 4-PDT preferentially induces apoptosis of CD4+CD7− malignant T-lymphocytes in the blood relative to CD11b+ monocytes and nonmalignant T-cells. In vivo Pc 4-PDT of MF skin also photodamages the antiapoptotic protein Bcl-2. PMID:21197103

  9. Galois LCD Codes over Finite Fields

    OpenAIRE

    Liu, Xiusheng; Fan, Yun; Liu, Hualu

    2017-01-01

    In this paper, we study the complementary dual codes in more general setting (which are called Galois LCD codes) by a uniform method. A necessary and sufficient condition for linear codes to be Galois LCD codes is determined, and constacyclic codes to be Galois LCD codes are characterized. Some illustrative examples which constacyclic codes are Galois LCD MDS codes are provided as well. In particular, we study Hermitian LCD constacyclic codes. Finally, we present a construction of a class of ...

  10. GOC: General Orbit Code

    International Nuclear Information System (INIS)

    Maddox, L.B.; McNeilly, G.S.

    1979-08-01

    GOC (General Orbit Code) is a versatile program which will perform a variety of calculations relevant to isochronous cyclotron design studies. In addition to the usual calculations of interest (e.g., equilibrium and accelerated orbits, focusing frequencies, field isochronization, etc.), GOC has a number of options to calculate injections with a charge change. GOC provides both printed and plotted output, and will follow groups of particles to allow determination of finite-beam properties. An interactive PDP-10 program called GIP, which prepares input data for GOC, is available. GIP is a very easy and convenient way to prepare complicated input data for GOC. Enclosed with this report are several microfiche containing source listings of GOC and other related routines and the printed output from a multiple-option GOC run

  11. Code des baux 2018

    CERN Document Server

    Vial-Pedroletti, Béatrice; Kendérian, Fabien; Chavance, Emmanuelle; Coutan-Lapalus, Christelle

    2017-01-01

    Le code des baux 2018 vous offre un contenu extrêmement pratique, fiable et à jour au 1er août 2017. Cette 16e édition intègre notamment : le décret du 27 juillet 2017 relatif à l’évolution de certains loyers dans le cadre d’une nouvelle location ou d’un renouvellement de bail, pris en application de l’article 18 de la loi n° 89-462 du 6 juillet 1989 ; la loi du 27 janvier 2017 relative à l’égalité et à la citoyenneté ; la loi du 9 décembre 2016 relative à la transparence, à la lutte contre la corruption et à la modernisation de la vie économique ; la loi du 18 novembre 2016 de modernisation de la justice du xxie siècle

  12. Interaction With PC Tablets And Possible Emotional Responses

    Directory of Open Access Journals (Sweden)

    Emy Agren

    2015-08-01

    Full Text Available The remarkable developments in mobile-based technologies have brought prominent impacts on human life style. Today life is running on mobile electronic devices smart phones tablets gaming devices and video-players. Generally the users acquaint with the features and properties of products after emotionally and physically interacting with the devices. The interaction in return influencing our moods depending on the feelings the technology creates. The focus of this study lays on the uses of tablets or also called PC tablets and its effects on its users emotional responses. To discover possible emotional responses with the tablets the data in this work were collected through a survey questionnaire from participants belongs to various backgrounds age groups and genders. The model of emotions was adopted in order to classify the emotional responses.The study has found that during or after the interaction with the tablets the users may get positive or negative emotional responses of a different kind. The users mood can also be affected by awakening such emotional feelings as happiness sadness frustration etc.

  13. Indexes of large genome collections on a PC.

    Directory of Open Access Journals (Sweden)

    Agnieszka Danek

    Full Text Available The availability of thousands of individual genomes of one species should boost rapid progress in personalized medicine or understanding of the interaction between genotype and phenotype, to name a few applications. A key operation useful in such analyses is aligning sequencing reads against a collection of genomes, which is costly with the use of existing algorithms due to their large memory requirements. We present MuGI, Multiple Genome Index, which reports all occurrences of a given pattern, in exact and approximate matching model, against a collection of thousand(s genomes. Its unique feature is the small index size, which is customisable. It fits in a standard computer with 16-32 GB, or even 8 GB, of RAM, for the 1000GP collection of 1092 diploid human genomes. The solution is also fast. For example, the exact matching queries (of average length 150 bp are handled in average time of 39 µs and with up to 3 mismatches in 373 µs on the test PC with the index size of 13.4 GB. For a smaller index, occupying 7.4 GB in memory, the respective times grow to 76 µs and 917 µs. Software is available at http://sun.aei.polsl.pl/mugi under a free license. Data S1 is available at PLOS One online.

  14. METHANE de-NOX for Utility PC Boilers

    Energy Technology Data Exchange (ETDEWEB)

    Bruce Bryan; Joseph Rabovitser; Serguei Nester; Stan Wohadlo

    2004-12-31

    Preparations for conducting large-scale combustion tests with caking bituminous coal continued during the start of this quarter. Major project accomplishments related to bituminous coal testing included: a CFD preheat model and evaluation, an update of the process flow diagram and a detailed preheat burner mechanical design (suitable for construction) for firing bituminous coal. Installation and testing of the 85 MMBtu/h bituminous coal preheating system was planned to take place before the end of December. Based on the inability to conduct testing in Riley's Commercial Burner Test Facility (CBTF) during freezing weather, a schedule review indicated required site work for testing bituminous coal at the CBTF could not be completed before freezing weather set in at the site. Further bituminous preheat modification work was put on hold and efforts turned to securing the test facility over the winter season. Bituminous coal tests are therefore delayed; April-May 2005 is earliest estimate of when testing can resume. A request for a time extension was submitted to DOE to extend the project through September 2005 to allow time to secure additional funding and complete the bituminous coal testing. Removal of the PRB PC Preheater from the CBTF burner deck was completed. Decommissioning of the CBTF for the winter was also completed.

  15. KCl stimulation increases norepinephrine transporter function in PC12 cells.

    Science.gov (United States)

    Mandela, Prashant; Ordway, Gregory A

    2006-09-01

    The norepinephrine transporter (NET) plays a pivotal role in terminating noradrenergic signaling and conserving norepinephrine (NE) through the process of re-uptake. Recent evidence suggests a close association between NE release and regulation of NET function. The present study evaluated the relationship between release and uptake, and the cellular mechanisms that govern these processes. KCl stimulation of PC12 cells robustly increased [3H]NE uptake via the NET and simultaneously increased [3H]NE release. KCl-stimulated increases in uptake and release were dependent on Ca2+. Treatment of cells with phorbol-12-myristate-13-acetate (PMA) or okadaic acid decreased [3H]NE uptake but did not block KCl-stimulated increases in [3H]NE uptake. In contrast, PMA increased [3H]NE release and augmented KCl-stimulated release, while okadaic acid had no effects on release. Inhibition of Ca2+-activated signaling cascades with KN93 (a Ca2+ calmodulin-dependent kinase inhibitor), or ML7 and ML9 (myosin light chain kinase inhibitors), reduced [3H]NE uptake and blocked KCl-stimulated increases in uptake. In contrast, KN93, ML7 and ML9 had no effect on KCl-stimulated [3H]NE release. KCl-stimulated increases in [3H]NE uptake were independent of transporter trafficking to the plasma membrane. While increases in both NE release and uptake mediated by KCl stimulation require Ca2+, different intracellular mechanisms mediate these two events.

  16. The NA48 on-line PC farm

    CERN Document Server

    Wittgen, M

    2001-01-01

    The NA48 experiment at the CERN SPS measures the direct CP violation parameter Re( epsilon '/z) in the neutral kaon system with an intended precision of 2*10/sup -4/. Thus, the data acquisition system has to handle peak rates up to 150 MByte/s during a 2.5 s beam burst and flat rates up to 20 MByte/s during on-line processing. The NA48 on-line PC farm includes 24 PentiumII-266 MHz PCs connected via switched fast ethernet network. This farm receives data from the detector systems and performs event building. Afterwards the data are transferred via an optical gigabit ethernet link to the NA48 central data recording system at CERN computer center. In addition, trigger and checking processes can be applied. The software on the farm is implemented as client/server applications and represents a highly flexible, fail safe, and scalable system. During data taking, in 1999, 100 TByte were collected, processed, and stored by the acquisition system with an overall efficiency of 99%. (5 refs).

  17. STREAK CAMERA MEASUREMENTS OF THE APS PC GUN DRIVE LASER

    Energy Technology Data Exchange (ETDEWEB)

    Dooling, J. C.; Lumpkin, A. H.

    2017-06-25

    We report recent pulse-duration measurements of the APS PC Gun drive laser at both second harmonic and fourth harmonic wavelengths. The drive laser is a Nd:Glass-based chirped pulsed amplifier (CPA) operating at an IR wavelength of 1053 nm, twice frequency-doubled to obtain UV output for the gun. A Hamamatsu C5680 streak camera and an M5675 synchroscan unit are used for these measurements; the synchroscan unit is tuned to 119 MHz, the 24th subharmonic of the linac s-band operating frequency. Calibration is accomplished both electronically and optically. Electronic calibration utilizes a programmable delay line in the 119 MHz rf path. The optical delay uses an etalon with known spacing between reflecting surfaces and is coated for the visible, SH wavelength. IR pulse duration is monitored with an autocorrelator. Fitting the streak camera image projected profiles with Gaussians, UV rms pulse durations are found to vary from 2.1 ps to 3.5 ps as the IR varies from 2.2 ps to 5.2 ps.

  18. Large-scale coordinated observations of Pc5 pulsation events

    Directory of Open Access Journals (Sweden)

    Z. Mtumela

    2016-09-01

    Full Text Available HF (high-frequency radars belonging to SuperDARN (Super Dual Auroral Radar Network receive backscatter over substantial fields of view which, when combined, allow for simultaneous returns over extensive regions of the polar caps and midlatitudes. This makes them ideal instruments for the observation of pulsations in the Pc5 (1–5 mHz frequency band. Relatively few pulsation events observed by multiple radars have been reported in the literature. Here we describe observations of three such events which extend over more than 120° of magnetic longitude in the Northern Hemisphere and one of which is also detected in the Southern Hemisphere. All three events show characteristics of field line resonances. In one case the pulsation has also been observed by magnetometers under or near the radar fields of view. The extensive longitudinal coverage allows accurate determination of azimuthal wave numbers. These are at the upper end of the lower values associated with external sources such as those in the solar wind. Such sources imply antisunward flow. However, the azimuthal wave number is negative, implying westward propagation at magnetic local times on both sides of noon, as would be expected from drift–bounce resonance with positive particles. Quiet conditions and a very low ring current during the events argue against this. The identification of the source of pulsations from a number of different mechanisms remains a problem of interest.

  19. Entanglement-assisted quantum MDS codes from negacyclic codes

    Science.gov (United States)

    Lu, Liangdong; Li, Ruihu; Guo, Luobin; Ma, Yuena; Liu, Yang

    2018-03-01

    The entanglement-assisted formalism generalizes the standard stabilizer formalism, which can transform arbitrary classical linear codes into entanglement-assisted quantum error-correcting codes (EAQECCs) by using pre-shared entanglement between the sender and the receiver. In this work, we construct six classes of q-ary entanglement-assisted quantum MDS (EAQMDS) codes based on classical negacyclic MDS codes by exploiting two or more pre-shared maximally entangled states. We show that two of these six classes q-ary EAQMDS have minimum distance more larger than q+1. Most of these q-ary EAQMDS codes are new in the sense that their parameters are not covered by the codes available in the literature.

  20. Self-assembly of F16ZnPc thin films and F16ZnPc-ZnPc heterostructures on deactivated Si surfaces studied by scanning tunneling microscopy

    Science.gov (United States)

    Tan, Andrew; Wagner, Sean; Zhang, Pengpeng

    2017-02-01

    Using scanning tunneling microscopy, we show that hexadecafluorinated zinc phthalocyanine (F16ZnPc) molecules form two morphologically different self-assembled structures that both display point-on-line coincident epitaxial registration with the deactivated Si(111)-B √{3 }×√{3 } surface. The packing motif in these structures suggests that fluorination of conjugated organic molecules can lead to stronger molecule-substrate interaction, π-π intermolecular interaction, and side-to-side intermolecular repulsion. The delicate balance and interplay between these interactions determine the self-assembly behavior of fluorinated molecules. Furthermore, we demonstrate the formation of vertically and laterally stacked F16ZnPc-ZnPc heterojunctions, allowing for future spectroscopy investigation of molecular electronic structures and charge transfer behavior at organic-organic hetero-interfaces.

  1. Diagonal Eigenvalue Unity (DEU) code for spectral amplitude coding-optical code division multiple access

    Science.gov (United States)

    Ahmed, Hassan Yousif; Nisar, K. S.

    2013-08-01

    Code with ideal in-phase cross correlation (CC) and practical code length to support high number of users are required in spectral amplitude coding-optical code division multiple access (SAC-OCDMA) systems. SAC systems are getting more attractive in the field of OCDMA because of its ability to eliminate the influence of multiple access interference (MAI) and also suppress the effect of phase induced intensity noise (PIIN). In this paper, we have proposed new Diagonal Eigenvalue Unity (DEU) code families with ideal in-phase CC based on Jordan block matrix with simple algebraic ways. Four sets of DEU code families based on the code weight W and number of users N for the combination (even, even), (even, odd), (odd, odd) and (odd, even) are constructed. This combination gives DEU code more flexibility in selection of code weight and number of users. These features made this code a compelling candidate for future optical communication systems. Numerical results show that the proposed DEU system outperforms reported codes. In addition, simulation results taken from a commercial optical systems simulator, Virtual Photonic Instrument (VPI™) shown that, using point to multipoint transmission in passive optical network (PON), DEU has better performance and could support long span with high data rate.

  2. Selection of Code and Interleaver for Turbo Coding

    DEFF Research Database (Denmark)

    Andersen, Jakob Dahl

    1998-01-01

    The selection of component codes for turbo coding has often been based on the performance at high SNR's. However, we will argue that the selection mainly should be based on the performance at low SNR's, i.e. the convergence properties. Further, we will present a way to construct interleavers...... that significantly improve the performance of the turbo coding scheme at high SNR's, i.e. lowers the error floor...

  3. Ambipolar organic heterojunction transistors based on F16CuPc/CuPc with a MoO3 buffer layer

    Science.gov (United States)

    Mingdong, Yi; Ning, Zhang; Linghai, Xie; Wei, Huang

    2015-10-01

    We fabricated heterojunction organic field-effect transistors (OFETs) using copper phthalocyanine (CuPc) and hexadecafluorophtholocyaninatocopper (F16CuPc) as hole transport layer and electron transport layer, respectively. Compared with F16CuPc based OFETs, the electron field-effect mobility in the heterojunction OFETs increased from 3.1 × 10-3 to 8.7 × 10-3 cm2/(V·s), but the p-type behavior was not observed. To enhanced the hole injection, we modified the source-drain electrodes using the MoO3 buffer layer, and the hole injection can be effectively improved. Eventually, the ambipolar transport characteristics of the CuPc/F16CuPc based OFETs with a MoO3 buffer layer were achieved, and the field-effect mobilities of electron and hole were 2.5 × 10-3 and 3.1 × 10-3 cm2/(V·s), respectively. Project supported by the National Natural Science Foundation of China (Nos. 61475074, 61204095).

  4. Modeling the phase equilibria of a H2O-CO2 mixture with PC-SAFT and tPC-PSAFT equations of state

    Science.gov (United States)

    Diamantonis, Nikolaos I.; Economou, Ioannis G.

    2012-06-01

    Water-carbon dioxide binary mixtures are important for a number of industrial and environmental applications. Accurate modeling of the thermodynamic properties is a challenging task due to the highly non-ideal intermolecular interactions. In this work, two models based on the Statistical Associating Fluid Theory (SAFT) are used to correlate reliable experimental vapor-liquid equilibria (VLE) and liquid-liquid equilibria (LLE) data in the temperature range 298-533 K. CO2 is modeled as a non-associating or associating component within the Perturbed Chain-SAFT (PC-SAFT) and as a quadrupolar component within the truncated PC-Polar SAFT (tPC-PSAFT). It is shown that PC-SAFT with explicit account of H2O-CO2 cross-association and tPC-PSAFT with explicit account of CO2 quadrupolar interactions are the most accurate of the models examined. Saturated liquid mixture density data are accurately predicted by the two models.

  5. Stochastic Decoding of Turbo Codes

    OpenAIRE

    Dong , Q. T.; ARZEL , Matthieu; Jego , Christophe; Gross , W. J.

    2010-01-01

    International audience; Stochastic computation is a technique in which operations on probabilities are performed on random bit streams. Stochastic decoding of forward error-correction (FEC) codes is inspired by this technique. This paper extends the application of the stochastic decoding approach to the families of convolutional codes and turbo codes. It demonstrates that stochastic computation is a promising solution to improve the data throughput of turbo decoders with very simple implement...

  6. PC-based control of a high-voltage injector

    International Nuclear Information System (INIS)

    Constantin, F.

    1998-01-01

    The stability of high voltage injectors is one of the major problems in any accelerator system. Most of the troubles encountered in the normal operation of an accelerator are connected with the ion source and associated high voltage platforms, regardless of the source or high voltage generator type. The quality of the ion beam injected in the accelerator strongly depends on the power supplies used in the injector and on the ability to control the non-electrical parameters (gas-flow, temperature, etc.). A wide used method in controlling is based on optical links between high-voltage platform and computer, the adjustments being more or less automated. Although the method mentioned above can be still useful in injector control, a different approach is presented in this work, i.e., the computer itself is placed inside the high-voltage terminal. Only one optical link is still necessary to connect this computer with an user-friendly host at ground potential. Requirements: - varying and monitoring the filament current; - gas flow control in the ion source; - reading the vacuum values; - current and voltage control for the anodic, magnet, extraction, suppression and lens' sources. Even in the high voltage terminal there are compartments with different voltages regardless the floating ground. In our injector the extraction voltage is applied on the top of the ion source including the filament and the anodic voltage. The extraction voltage is of maximum 30 kV. In this situation a second optical link is required to transfer the control for the anodic and magnet source power supply assuming the dedicated computer on the floating ground. One PC is placed inside the high voltage terminal and one PC outside the injector. The optical link (more precisely two optical wires) connects the serial ports. The inside computer is equipped with two multipurpose ADC/DAC and digital I/O card. They permit to read or output DC levels ranging between 0 to 10 volts or TTL signals. The filament

  7. Adsorption properties of CoPc molecule on epitaxial graphene/Ru(0 0 0 1)

    International Nuclear Information System (INIS)

    Cai, Yiliang; Zhang, Hanjie; Song, Junjie; Zhang, Yuxi; Bao, Shining; He, Pimo

    2015-01-01

    Graphical abstract: - Highlights: • The adsorption behavior of CoPc on MG/Ru(0 0 0 1) was investigated by STM and DFT. • The impact of the defect in MG/Ru(0 0 0 1) on the adsorption properties was studied. • A central contrast was found for CoPcs adsorbed on intact and defective graphene. - Abstract: Combining the scanning tunneling microscopy (STM) and density functional theory (DFT), the adsorption properties of cobalt phthalocyanine (CoPc) on monolayer graphene/Ru(0 0 0 1) [MG/Ru(0 0 0 1)] have been investigated. At monolayer coverage, CoPc forms an ordered Kagome lattice, and a slight deformation for one lobe of CoPc and charge transfer from CoPc to Ru(0 0 0 1) substrate take place. The existence of the defect (vacancy) in graphene on Ru(0 0 0 1) increases the coupling between the Ru substrate and the epitaxial graphene. Such an increase of the coupling brings about an overall CoPc molecular energy level shift toward the low binding energy, which subsequently results in a central topographical contrast between the CoPc molecules on the intact and defective MG/Ru(0 0 0 1)

  8. Impact of a Recombinant Biocontrol Bacterium, Pseudomonas fluorescens pc78, on Microbial Community in Tomato Rhizosphere

    Directory of Open Access Journals (Sweden)

    Hyun Gi Kong

    2016-04-01

    Full Text Available Pseudomonas fluorescens pc78 is an effective biocontrol agent for soil-borne fungal diseases. We previously constructed a P43-gfp tagged biocontrol bacteria P. fluorescens pc78-48 to investigate bacterial traits in natural ecosystem and the environmental risk of genetically modified biocontrol bacteria in tomato rhizosphere. Fluctuation of culturable bacteria profile, microbial community structure, and potential horizontal gene transfer was investigated over time after the bacteria treatment to the tomato rhizosphere. Tagged gene transfer to other organisms such as tomato plants and bacteria cultured on various media was examined by polymerase chain reaction, using gene specific primers. Transfer of chromosomally integrated P43-gfp from pc78 to other organisms was not apparent. Population and colony types of culturable bacteria were not significantly affected by the introduction of P. fluorescens pc78 or pc78-48 into tomato rhizosphere. Additionally, terminal restriction fragment length polymorphism profiles were investigated to estimate the influence on the microbial community structure in tomato rhizosphere between non-treated and pc78-48-treated samples. Interestingly, rhizosphere soil treated with strain pc78-48 exhibited a significantly different bacterial community structure compared to that of non-treated rhizosphere soil. Our results suggest that biocontrol bacteria treatment influences microbial community in tomato rhizosphere, while the chromosomally modified biocontrol bacteria may not pose any specific environmental risk in terms of gene transfer.

  9. Protective effects of alpha lipoic acid on high glucose-induced neurotoxicity in PC12 cells.

    Science.gov (United States)

    Najafi, Rezvan; Sharifi, Ali Mohammad; Hosseini, Asieh

    2015-06-01

    Hyperglycemia plays an important role in the development of diabetic neuropathy. In this study, we investigated the protective effects of alpha lipoic acid (ALA) against high glucose-induced neurotoxicity in PC12 cells as a suitable in vitro model for studying neuronal functions. PC12 cells were treated with high glucose (25 mg/ml for 24 h) in the absence and presence of ALA (100 μM for 24 h). The viability of PC12 cells was estimated by using MTT assay. The expression of pro- apoptotic Bax, anti- apoptotic Bcl-2 and caspase 3 protein were evaluated by western blotting. The reactive oxygen species (ROS) levels were determined with 2,7-dichlorodihydro- fluorescein diacetate (H2DCFDA). Biochemical markers of oxidative stress were assessed by using the total antioxidant power (TAP), lipid peroxidation (LPO), ADP/ATP ratio, activity of antioxidant enzymes catalase (CAT) and superoxide dismutase (SOD). Pretreatment of PC12 cells with ALA, significantly improved high glucose-induced toxicity by increasing activity of antioxidant enzymes CAT and SOD in the PC12 cell. It also increased the concentrations of TAP. An elevated level of cell death and ROS in high glucose conditions, diminished with ALA treatment. Over expression of Bax and caspase 3 protein, elevation of ADP/ATP ratio and LPO level in high glucose- treated PC12 cells, were significantly reduced by ALA. It was concluded that ALA attenuates neurotoxicity induced by high glucose in PC12 cells.

  10. Global Pc5 pulsations during strong magnetic storms: excitation mechanisms and equatorward expansion

    Science.gov (United States)

    Marin, J. A.; Pilipenko, V.; Vega, P.; Zesta, E.; Stepanova, M. V.; Uozumi, T.

    2012-12-01

    The spatial structure of Pc5 waves during the recovery phases of strong magnetic storms is important not only for the identification of possible physical mechanisms of its excitation, but as an important parameter of the ULF driver of relativistic electrons. The dynamics of global Pc5 waves during the magnetic storms on October 29-31, 2003 and May 15, 2005 is studied, using the data from the trans-American network of magnetometers comprising SAMBA, MAGDAS, CARISMA, and MACCS arrays. We study the behavior of Pc5 wave properties and spectral characteristics with respect to latitude. One of the accepted sources of Pc5 wave activity is Kelvin-Helmholtz instability in the flanks of the magnetosphere. In our study we examine whether the KH instability is sufficient as an excitation mechanism for the observed waves? More specifically, we attempt to determine, what is the Pc5 wave generation type: self-excitation, resonant response, trigger? While the KH instability generation takes place at the outer flanks of the magnetosphere, Pc5 waves are observed at all latitudes. We determine how deep into the magnetosphere these Pc5 waves activity can extend and what is the wave energy transmission mechanism: surface mode, cavity mode, Alfven field-line resonance, magnetospheric MHD waveguide?

  11. Impact of a Recombinant Biocontrol Bacterium, Pseudomonas fluorescens pc78, on Microbial Community in Tomato Rhizosphere.

    Science.gov (United States)

    Kong, Hyun Gi; Kim, Nam Hee; Lee, Seung Yeup; Lee, Seon-Woo

    2016-04-01

    Pseudomonas fluorescens pc78 is an effective biocontrol agent for soil-borne fungal diseases. We previously constructed a P43-gfp tagged biocontrol bacteria P. fluorescens pc78-48 to investigate bacterial traits in natural ecosystem and the environmental risk of genetically modified biocontrol bacteria in tomato rhizosphere. Fluctuation of culturable bacteria profile, microbial community structure, and potential horizontal gene transfer was investigated over time after the bacteria treatment to the tomato rhizosphere. Tagged gene transfer to other organisms such as tomato plants and bacteria cultured on various media was examined by polymerase chain reaction, using gene specific primers. Transfer of chromosomally integrated P43-gfp from pc78 to other organisms was not apparent. Population and colony types of culturable bacteria were not significantly affected by the introduction of P. fluorescens pc78 or pc78-48 into tomato rhizosphere. Additionally, terminal restriction fragment length polymorphism profiles were investigated to estimate the influence on the microbial community structure in tomato rhizosphere between non-treated and pc78-48-treated samples. Interestingly, rhizosphere soil treated with strain pc78-48 exhibited a significantly different bacterial community structure compared to that of non-treated rhizosphere soil. Our results suggest that biocontrol bacteria treatment influences microbial community in tomato rhizosphere, while the chromosomally modified biocontrol bacteria may not pose any specific environmental risk in terms of gene transfer.

  12. APC-PC Combined Scheme in Gilbert Two State Model: Proposal and Study

    Science.gov (United States)

    Bulo, Yaka; Saring, Yang; Bhunia, Chandan Tilak

    2017-04-01

    In an automatic repeat request (ARQ) scheme, a packet is retransmitted if it gets corrupted due to transmission errors caused by the channel. However, an erroneous packet may contain both erroneous bits and correct bits and hence it may still contain useful information. The receiver may be able to combine this information from multiple erroneous copies to recover the correct packet. Packet combining (PC) is a simple and elegant scheme of error correction in transmitted packet, in which two received copies are XORed to obtain the bit location of erroneous bits. Thereafter, the packet is corrected by bit inversion of bit located as erroneous. Aggressive packet combining (APC) is a logic extension of PC primarily designed for wireless communication with objective of correcting error with low latency. PC offers higher throughput than APC, but PC does not correct double bit errors if occur in same bit location of erroneous copies of the packet. A hybrid technique is proposed to utilize the advantages of both APC and PC while attempting to remove the limitation of both. In the proposed technique, applications of APC-PC on Gilbert two state model has been studied. The simulation results show that the proposed technique offers better throughput than the conventional APC and lesser packet error rate than PC scheme.

  13. An algebraic approach to graph codes

    DEFF Research Database (Denmark)

    Pinero, Fernando

    theory as evaluation codes. Chapter three consists of the introduction to graph based codes, such as Tanner codes and graph codes. In Chapter four, we compute the dimension of some graph based codes with a result combining graph based codes and subfield subcodes. Moreover, some codes in chapter four...... are optimal or best known for their parameters. In chapter five we study some graph codes with Reed–Solomon component codes. The underlying graph is well known and widely used for its good characteristics. This helps us to compute the dimension of the graph codes. We also introduce a combinatorial concept...... related to the iterative encoding of graph codes with MDS component code. The last chapter deals with affine Grassmann codes and Grassmann codes. We begin with some previously known codes and prove that they are also Tanner codes of the incidence graph of the point–line partial geometry...

  14. QR code for medical information uses.

    Science.gov (United States)

    Fontelo, Paul; Liu, Fang; Ducut, Erick G

    2008-11-06

    We developed QR code online tools, simulated and tested QR code applications for medical information uses including scanning QR code labels, URLs and authentication. Our results show possible applications for QR code in medicine.

  15. Ultrasound imaging using coded signals

    DEFF Research Database (Denmark)

    Misaridis, Athanasios

    coded excitation can be used for increasing the frame rate. The work includes both simulated results using Field II, and experimental results based on measurements on phantoms as well as clinical images. Initially a mathematical foundation of signal modulation is given. Pulse compression based...... is described. Application of coded excitation in array imaging is evaluated through simulations in Field II. The low degree of the orthogonality among coded signals for ultrasound systems is first discussed, and the effect of mismatched filtering in the cross-correlation properties of the signals is evaluated...... emissions. Finally, a novel coding technique which uses pulse train excitation is presented....

  16. Grassmann codes and Schubert unions

    DEFF Research Database (Denmark)

    Hansen, Johan Peder; Johnsen, Trygve; Ranestad, Kristian

    2009-01-01

    We study subsets of Grassmann varieties over a field , such that these subsets are unions of Schubert cycles, with respect to a fixed flag. We study such sets in detail, and give applications to coding theory, in particular for Grassmann codes. For much is known about such Schubert unions...... with a maximal number of -rational points for a given spanning dimension. We study the case and give a conjecture for general . We also define Schubert union codes in general, and study the parameters and support weights of these codes....

  17. High Order Modulation Protograph Codes

    Science.gov (United States)

    Nguyen, Thuy V. (Inventor); Nosratinia, Aria (Inventor); Divsalar, Dariush (Inventor)

    2014-01-01

    Digital communication coding methods for designing protograph-based bit-interleaved code modulation that is general and applies to any modulation. The general coding framework can support not only multiple rates but also adaptive modulation. The method is a two stage lifting approach. In the first stage, an original protograph is lifted to a slightly larger intermediate protograph. The intermediate protograph is then lifted via a circulant matrix to the expected codeword length to form a protograph-based low-density parity-check code.

  18. Semi-supervised sparse coding

    KAUST Repository

    Wang, Jim Jing-Yan

    2014-07-06

    Sparse coding approximates the data sample as a sparse linear combination of some basic codewords and uses the sparse codes as new presentations. In this paper, we investigate learning discriminative sparse codes by sparse coding in a semi-supervised manner, where only a few training samples are labeled. By using the manifold structure spanned by the data set of both labeled and unlabeled samples and the constraints provided by the labels of the labeled samples, we learn the variable class labels for all the samples. Furthermore, to improve the discriminative ability of the learned sparse codes, we assume that the class labels could be predicted from the sparse codes directly using a linear classifier. By solving the codebook, sparse codes, class labels and classifier parameters simultaneously in a unified objective function, we develop a semi-supervised sparse coding algorithm. Experiments on two real-world pattern recognition problems demonstrate the advantage of the proposed methods over supervised sparse coding methods on partially labeled data sets.

  19. Coding, cryptography and combinatorics

    CERN Document Server

    Niederreiter, Harald; Xing, Chaoping

    2004-01-01

    It has long been recognized that there are fascinating connections between cod­ ing theory, cryptology, and combinatorics. Therefore it seemed desirable to us to organize a conference that brings together experts from these three areas for a fruitful exchange of ideas. We decided on a venue in the Huang Shan (Yellow Mountain) region, one of the most scenic areas of China, so as to provide the additional inducement of an attractive location. The conference was planned for June 2003 with the official title Workshop on Coding, Cryptography and Combi­ natorics (CCC 2003). Those who are familiar with events in East Asia in the first half of 2003 can guess what happened in the end, namely the conference had to be cancelled in the interest of the health of the participants. The SARS epidemic posed too serious a threat. At the time of the cancellation, the organization of the conference was at an advanced stage: all invited speakers had been selected and all abstracts of contributed talks had been screened by the p...

  20. Coded aperture tomography revisited

    International Nuclear Information System (INIS)

    Bizais, Y.; Rowe, R.W.; Zubal, I.G.; Bennett, G.W.; Brill, A.B.

    1983-01-01

    Coded aperture (CA) Tomography never achieved wide spread use in Nuclear Medicine, except for the degenerate case of Seven Pinhole tomagraphy (7PHT). However it enjoys several attractive features (high sensitivity and tomographic ability with a statis detector). On the other hand, resolution is usually poor especially along the depth axis and the reconstructed volume is rather limited. Arguments are presented justifying the position that CA tomography can be useful for imaging time-varying 3D structures, if its major drawbacks (poor longitudinal resolution and difficulty in quantification) are overcome. Poor results obtained with 7PHT can be explained by both a very limited angular range sampled and a crude modelling of the image formation process. Therefore improvements can be expected by the use of a dual-detector system, along with a better understanding of its sampling properties and the use of more powerful reconstruction algorithms. Non overlapping multipinhole plates, because they do not involve a decoding procedure, should be considered first for practical applications. Use of real CA should be considered for cases in which non overlapping multipinhole plates do not lead to satisfactory solutions. We have been and currently are carrying out theoretical and experimental works, in order to define the factors which limit CA imaging and to propose satisfactory solutions for Dynamic Emission Tomography