Chemical Principles Revisited: Chemical Equilibrium.
Mickey, Charles D.
1980-01-01
Describes: (1) Law of Mass Action; (2) equilibrium constant and ideal behavior; (3) general form of the equilibrium constant; (4) forward and reverse reactions; (5) factors influencing equilibrium; (6) Le Chatelier's principle; (7) effects of temperature, changing concentration, and pressure on equilibrium; and (8) catalysts and equilibrium. (JN)
Vanícek, Jirí
2011-01-01
Nuclear tunneling and other nuclear quantum effects have been shown to play a significant role in molecules as large as enzymes even at physiological temperatures. I discuss how these quantum phenomena can be accounted for rigorously using Feynman path integrals in calculations of the equilibrium and kinetic isotope effects as well as of the temperature dependence of the rate constant. Because these calculations are extremely computationally demanding, special attention is devoted to increasing the computational efficiency by orders of magnitude by employing efficient path integral estimators.
Zhao, Xiao-mei; Xie, Dong-fan; Li, Qi
2015-02-01
With the development of intelligent transport system, advanced information feedback strategies have been developed to reduce traffic congestion and enhance the capacity. However, previous strategies provide accurate information to travelers and our simulation results show that accurate information brings negative effects, especially in delay case. Because travelers prefer to the best condition route with accurate information, and delayed information cannot reflect current traffic condition but past. Then travelers make wrong routing decisions, causing the decrease of the capacity and the increase of oscillations and the system deviating from the equilibrium. To avoid the negative effect, bounded rationality is taken into account by introducing a boundedly rational threshold BR. When difference between two routes is less than the BR, routes have equal probability to be chosen. The bounded rationality is helpful to improve the efficiency in terms of capacity, oscillation and the gap deviating from the system equilibrium.
Has Chemical Education Reached Equilibrium?
Moore, John W.
1997-06-01
The other day I got to thinking about whether something akin to Le Chatelier's principle operates in chemical education. That is, whenever someone alters the conditions under which we interact with students, there is a shift in the system that attempts to minimize or counteract the change.
Equilibrium and Sudden Events in Chemical Evolution
Weinberg, David H; Freudenburg, Jenna
2016-01-01
We present new analytic solutions for one-zone (fully mixed) chemical evolution models and explore their implications. In contrast to existing analytic models, we incorporate a realistic delay time distribution for Type Ia supernovae (SNIa) and can therefore track the separate evolution of $\\alpha$-elements produced by core collapse supernovae (CCSNe) and iron peak elements synthesized in both CCSNe and SNIa. In generic cases, $\\alpha$ and iron abundances evolve to an equilibrium at which element production is balanced by metal consumption and gas dilution, instead of continuing to increase over time. The equilibrium absolute abundances depend principally on supernova yields and the outflow mass loading parameter $\\eta$, while the equilibrium abundance ratio [$\\alpha$/Fe] depends mainly on yields and secondarily on star formation history. A stellar population can be metal-poor either because it has not yet evolved to equilibrium or because high outflow efficiency makes the equilibrium abundance itself low. Sy...
Chemical equilibrium modeling of detonation
Energy Technology Data Exchange (ETDEWEB)
Fried, Laurence E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bastea, Sorin [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
2010-05-19
Energetic materials are unique for having a strong exothermic reactivity, which has made them desirable for both military and commercial applications. Energetic materials are commonly divided into high explosives, propellants, and pyrotechnics. We will focus on high explosive (HE) materials here, although there is a great deal of commonality between the classes of energetic materials. Furthermore the history of HE materials is long, their condensed-phase chemical properties are poorly understood.
Exploring Chemical Equilibrium in Hot Jovians
Blumenthal, Sarah; Harrington, Joseph; Mandell, Avi; Hébrard, Eric; Venot, Olivia; Cubillos, Patricio; Blecic, Jasmina; Challener, Ryan
2016-01-01
It has been established that equilibrium chemistry is usually achieved deep in the atmosphere of hot Jovians where timescales are short (Line and Yung 2013). Thus, equilibrium chemistry has been used as a starting point (setting initial conditions) for evaluating disequilibrium processes. We explore parameters of setting these initial conditions including departures from solar metallicity, the number of species allowed in a system, the types of species allowed in a system, and different thermodynamic libraries in an attempt to create a standard for evaluating equilibrium chemistry. NASA's open source code Chemical Equilibrium and Applications (CEA) is used to calculate model planet abundances by varying the metallicity, in the pressure regime 0.1 to 1 bar. These results are compared to a variety of exoplanets(Teq between 600 and 2100K) qualitatively by color maps of the dayside with different temperature redistributions. Additionally, CEA (with an up-dated thermodynamic library) is compared with the thermochemical model presented in Venotet al. (2012) for HD 209458b and HD 189733b. This same analysis is then applied to the cooler planet HD 97658b. Spectra are generated and we compare both models' outputs using the open source codetransit (https://github.com/exosports/transit) using the opacities of 15 molecules. We make the updated CEA thermodyanamic library and supporting Python scripts to do the CEA analyses available open source. Thiswork was supported by NASA Planetary Atmospheres grant NNX12AI69G.
Spectral Quasi-Equilibrium Manifold for Chemical Kinetics.
Kooshkbaghi, Mahdi; Frouzakis, Christos E; Boulouchos, Konstantinos; Karlin, Iliya V
2016-05-26
The Spectral Quasi-Equilibrium Manifold (SQEM) method is a model reduction technique for chemical kinetics based on entropy maximization under constraints built by the slowest eigenvectors at equilibrium. The method is revisited here and discussed and validated through the Michaelis-Menten kinetic scheme, and the quality of the reduction is related to the temporal evolution and the gap between eigenvalues. SQEM is then applied to detailed reaction mechanisms for the homogeneous combustion of hydrogen, syngas, and methane mixtures with air in adiabatic constant pressure reactors. The system states computed using SQEM are compared with those obtained by direct integration of the detailed mechanism, and good agreement between the reduced and the detailed descriptions is demonstrated. The SQEM reduced model of hydrogen/air combustion is also compared with another similar technique, the Rate-Controlled Constrained-Equilibrium (RCCE). For the same number of representative variables, SQEM is found to provide a more accurate description.
Does an irreversible chemical cycle support equilibrium?
Banerjee, Kinshuk
2013-01-01
The impossibility of attaining equilibrium for cyclic chemical reaction networks with irreversible steps is apparently due to a divergent entropy production rate. A deeper reason seems to be the violation of the detailed balance condition. In this work, we discuss how the standard theoretical framework can be adapted to include irreversible cycles, avoiding the divergence. With properly redefined force terms, such systems are also seen to reach and sustain equilibria that are characterized by the vanishing of the entropy production rate, though detailed balance is not maintained. Equivalence of the present formulation with Onsager's original prescription is established for both reversible and irreversible cycles, with a few adjustments in the latter case. Further justification of the attainment of true equilibrium is provided with the help of the minimum entropy production principle. All the results are generalized for an irreversible cycle comprising of N number of species.
Equilibrium and Sudden Events in Chemical Evolution
Weinberg, David H.; Andrews, Brett H.; Freudenburg, Jenna
2017-03-01
We present new analytic solutions for one-zone (fully mixed) chemical evolution models that incorporate a realistic delay time distribution for Type Ia supernovae (SNe Ia) and can therefore track the separate evolution of α-elements produced by core collapse supernovae (CCSNe) and iron peak elements synthesized in both CCSNe and SNe Ia. Our solutions allow constant, exponential, or linear–exponential ({{te}}-t/{τ {sfh}}) star formation histories, or combinations thereof. In generic cases, α and iron abundances evolve to an equilibrium at which element production is balanced by metal consumption and gas dilution, instead of continuing to increase over time. The equilibrium absolute abundances depend principally on supernova yields and the outflow mass loading parameter η, while the equilibrium abundance ratio [α /{Fe}] depends mainly on yields and secondarily on star formation history. A stellar population can be metal-poor either because it has not yet evolved to equilibrium or because high outflow efficiency makes the equilibrium abundance itself low. Systems with ongoing gas accretion develop metallicity distribution functions (MDFs) that are sharply peaked, while “gas starved” systems with rapidly declining star formation, such as the conventional “closed box” model, have broadly peaked MDFs. A burst of star formation that consumes a significant fraction of a system’s available gas and retains its metals can temporarily boost [α /{Fe}] by 0.1–0.3 dex, a possible origin for rare, α-enhanced stars with intermediate age and/or high metallicity. Other sudden transitions in system properties can produce surprising behavior, including backward evolution of a stellar population from high to low metallicity.
Equilibrium relationships for non-equilibrium chemical dependencies
Yablonsky, Gregory S.; Constales, Denis; Marin, Guy B.
2010-01-01
In contrast to common opinion, it is shown that equilibrium constants determine the time-dependent behavior of particular ratios of concentrations for any system of reversible first-order reactions. Indeed, some special ratios actually coincide with the equilibrium constant at any moment in time. This is established for batch reactors, and similar relations hold for steady-state plug-flow reactors, replacing astronomic time by residence time. Such relationships can be termed time invariants o...
Chemical Equilibrium in Collisions of Small Systems
Kraus, I; Oeschler, H; Redlich, K; Wheaton, S
2007-01-01
The system-size dependence of particle production in heavy-ion collisions at the top SPS energy is analyzed in terms of the statistical model. A systematic comparison is made of two suppression mechanisms that quantify strange particle yields in ultra-relativistic heavy-ion collisions: the canonical model with strangeness correlation radius determined from the data and the model formulated in the canonical ensemble using chemical off-equilibrium strangeness suppression factor. The system-size dependence of the correlation radius and the thermal parameters are obtained for p-p, C-C, Si-Si and Pb-Pb collisions at sqrt(s_NN) = 17.3 AGeV. It is shown that on the basis of a consistent set of data there is no clear difference between the two suppression patterns. In the present study the strangeness correlation radius was found to exhibit a rather weak dependence on the system size.
1976-01-01
The entropy of a gas system with the number of particles subject to external control is maximized to derive relations between the thermodynamic variables that obtain at equilibrium. These relations are described in terms of the chemical potential, defined as equivalent partial derivatives of entropy, energy, enthalpy, free energy, or free enthalpy. At equilibrium, the change in total chemical potential must vanish. This fact is used to derive the equilibrium constants for chemical reactions in terms of the partition functions of the species involved in the reaction. Thus the equilibrium constants can be determined accurately, just as other thermodynamic properties, from a knowledge of the energy levels and degeneracies for the gas species involved. These equilibrium constants permit one to calculate the equilibrium concentrations or partial pressures of chemically reacting species that occur in gas mixtures at any given condition of pressure and temperature or volume and temperature.
Ghirardi, Marco; Marchetti, Fabio; Pettinari, Claudio; Regis, Alberto; Roletto, Ezio
2015-01-01
A didactic sequence is proposed for the teaching of chemical equilibrium law. In this approach, we have avoided the kinetic derivation and the thermodynamic justification of the equilibrium constant. The equilibrium constant expression is established empirically by a trial-and-error approach. Additionally, students learn to use the criterion of…
Ghirardi, Marco; Marchetti, Fabio; Pettinari, Claudio; Regis, Alberto; Roletto, Ezio
2015-01-01
A didactic sequence is proposed for the teaching of chemical equilibrium law. In this approach, we have avoided the kinetic derivation and the thermodynamic justification of the equilibrium constant. The equilibrium constant expression is established empirically by a trial-and-error approach. Additionally, students learn to use the criterion of…
Teaching Chemical Equilibrium and Thermodynamics in Undergraduate General Chemistry Classes.
Banerjee, Anil C.
1995-01-01
Discusses some of the conceptual difficulties encountered by undergraduate students in learning certain aspects of chemical equilibrium and thermodynamics. Discusses teaching strategies for dealing with these difficulties. (JRH)
An Interactive Chemical Equilibrium Solver for the Personal Computer
Negus, Charles H.
1997-01-01
AN INTERACTIVE CHEMICAL EQUILIBRIUM SOLVER FOR THE PERSONAL COMPUTER Charles Hugh Negus Felix J. Pierce, Chairman Mechanical Engineering The Virginia Tech Equilibrium Chemistry (VTEC) code is a keyboard interactive, user friendly, chemical equilibrium solver for use on a personal computer. The code is particularly suitable for a teaching / learning environment. For a set of reactants at a defined thermodynamic state given by a user, the program will select all species...
Chemical Equilibrium as Balance of the Thermodynamic Forces
Zilbergleyt, B.
2004-01-01
The article sets forth comprehensive basics of thermodynamics of chemical equilibrium as balance of the thermodynamic forces. Based on the linear equations of irreversible thermodynamics, De Donder definition of the thermodynamic force, and Le Chatelier's principle, new thermodynamics of chemical equilibrium offers an explicit account for multiple chemical interactions within the system. Basic relations between energetic characteristics of chemical transformations and reaction extents are bas...
Using Analogies to Prevent Misconceptions about Chemical Equilibrium
Sahin Pekmez, Esin
2010-01-01
The main purpose of this study was to find the effectiveness of using analogies to prevent misconceptions about chemical equilibrium. Nineteen analogies, which were based on dynamic aspects of chemical equilibrium and application of Le Chatelier's principle, were developed. The participations of this study consisted of 11th grade students (n: 151)…
Energy Technology Data Exchange (ETDEWEB)
Qafoku, Odeta; Felmy, Andrew R.
2007-01-01
The development of an accurate aqueous thermodynamic model is described for oxalate species in the Na-Ba-Ca-Mn-Sr-Cl-NO3-PO4-SO4-H2O system at 25°C. The model is valid to high ionic strength (as high as 10m) and from very acid (10m H2SO4) to neutral and basic conditions. The model is based upon the equations of Pitzer and co-workers. The necessary ion-interaction parameters are determined by comparison with experimental data taken from the literature or determined in this study. The proposed aqueous activity and solubility model is valid for a range of applications from interpretation of studies on mineral dissolution at circumneutral pH to the dissolution of high-level waste tank sludges under acidic conditions.
Understanding Chemical Reaction Kinetics and Equilibrium with Interlocking Building Blocks
Cloonan, Carrie A.; Nichol, Carolyn A.; Hutchinson, John S.
2011-01-01
Chemical reaction kinetics and equilibrium are essential core concepts of chemistry but are challenging topics for many students, both at the high school and undergraduate university level. Visualization at the molecular level is valuable to aid understanding of reaction kinetics and equilibrium. This activity provides a discovery-based method to…
Thermodynamic and transport properties of gaseous tetrafluoromethane in chemical equilibrium
Hunt, J. L.; Boney, L. R.
1973-01-01
Equations and in computer code are presented for the thermodynamic and transport properties of gaseous, undissociated tetrafluoromethane (CF4) in chemical equilibrium. The computer code calculates the thermodynamic and transport properties of CF4 when given any two of five thermodynamic variables (entropy, temperature, volume, pressure, and enthalpy). Equilibrium thermodynamic and transport property data are tabulated and pressure-enthalpy diagrams are presented.
Evidence-Based Approaches to Improving Chemical Equilibrium Instruction
Davenport, Jodi L.; Leinhardt, Gaea; Greeno, James; Koedinger, Kenneth; Klahr, David; Karabinos, Michael; Yaron, David J.
2014-01-01
Two suggestions for instruction in chemical equilibrium are presented, along with the evidence that supports these suggestions. The first is to use diagrams to connect chemical reactions to the effects of reactions on concentrations. The second is the use of the majority and minority species (M&M) strategy to analyze chemical equilibrium…
Status of Chemical Equilibrium in Relativistic Heavy Ion Collisions
Cleymans, Jean
2009-01-01
Recent work on chemical equilibrium in heavy ion collisions is reviewed. The energy dependence of thermal parameters is discussed. The centrality dependence of thermal parameters at SPS energies is presented.
Status of chemical equilibrium in relativistic heavy-ion collisions
Indian Academy of Sciences (India)
J Cleymans
2003-04-01
Recent work on chemical equilibrium in heavy-ion collisions is reviewed. The energy dependence of thermal parameters is discussed. The centrality dependence of thermal parameters at SPS energies is presented.
Speleothems as Examples of Chemical Equilibrium Processes.
Wilson, James R.
1984-01-01
The chemical formation of speleothems such as stalactites and stalagmites is poorly understood by introductory geology instructors and misrepresented in most textbooks. Although evaporation may be a controlling factor in some caves, it is necessary to consider chemical precipitation as more important in controlling the diagenesis of calcium…
Investigation of Chemical Equilibrium Kinetics by the Electromigration Method
Bozhikov, G A; Bontchev, G D; Maslov, O D; Milanov, M V; Dmitriev, S N
2002-01-01
Measurement of the chemical reaction rates for complex formation as well as hydrolysis type reactions by the method of horizontal zone electrophoresis is outlined. The correlation between chemical equilibrium kinetics and electrodiffusion processes in a constant d.c. electric field is described. In model electromigration experiments the reaction rate constant of the complex formation of Hf(IV) and DTPA is determined.
Thermodynamics of chemical systems far from equilibrium
Energy Technology Data Exchange (ETDEWEB)
Ross, J. (Stanford Univ., CA (USA)); Garcia-Colin, L.S. (UAM-Iztapalapa, Postal (Mexico))
1989-03-09
A critique is presented of some recent work in this and other journals on the relation of thermodynamics to the mass action law of kinetics. For most chemical reactions, the thermodynamic variables change on the same time scale as the progress variable and there is no need for an extended thermodynamics.
Montoya-Castillo, Andrés
2016-01-01
The ability to efficiently and accurately calculate equilibrium time correlation functions of many-body condensed phase quantum systems is one of the outstanding problems in theoretical chemistry. The Nakajima-Zwanzig-Mori formalism coupled to the self-consistent solution of the memory kernel has recently proven to be highly successful for the computation of nonequilibrium dynamical averages. Here, we extend this formalism to treat symmetrized equilibrium time correlation functions for the spin-boson model. Following the first paper in this series [A. Montoya-Castillo and D. R. Reichman, J. Chem. Phys. $\\bf{144}$, 184104 (2016)], we use a Dyson-type expansion of the projected propagator to obtain a self-consistent solution for the memory kernel that requires only the calculation of normally evolved auxiliary kernels. We employ the approximate mean-field Ehrenfest method to demonstrate the feasibility of this approach. Via comparison with numerically exact results for the correlation function $\\mathcal{C}_{zz}...
Modified NASA-Lewis Chemical Equilibrium Code for MHD applications
Energy Technology Data Exchange (ETDEWEB)
Sacks, R. A.; Geyer, H. K.; Grammel, S. J.; Doss, E. D.
1979-12-01
A substantially modified version of the NASA-Lewis Chemical Equilibrium Code has recently been developed. The modifications were designed to extend the power and convenience of the Code as a tool for performing combustor analysis for MHD systems studies. This report describes the effect of the programming details from a user point of view, but does not describe the Code in detail.
Composition and Thermodynamic Properties of Air in Chemical Equilibrium
Moeckel, W E; Weston, Kenneth C
1958-01-01
Charts have been prepared relating the thermodynamic properties of air in chemical equilibrium for temperatures to 15,000 degrees k and for pressures 10(-5) to 10 (plus 4) atmospheres. Also included are charts showing the composition of air, the isentropic exponent, and the speed of sound. These charts are based on thermodynamic data calculated by the National Bureau of Standards.
2015-01-01
Simultaneously accurate and efficient prediction of molecular properties throughout chemical compound space is a critical ingredient toward rational compound design in chemical and pharmaceutical industries. Aiming toward this goal, we develop and apply a systematic hierarchy of efficient empirical methods to estimate atomization and total energies of molecules. These methods range from a simple sum over atoms, to addition of bond energies, to pairwise interatomic force fields, reaching to the more sophisticated machine learning approaches that are capable of describing collective interactions between many atoms or bonds. In the case of equilibrium molecular geometries, even simple pairwise force fields demonstrate prediction accuracy comparable to benchmark energies calculated using density functional theory with hybrid exchange-correlation functionals; however, accounting for the collective many-body interactions proves to be essential for approaching the “holy grail” of chemical accuracy of 1 kcal/mol for both equilibrium and out-of-equilibrium geometries. This remarkable accuracy is achieved by a vectorized representation of molecules (so-called Bag of Bonds model) that exhibits strong nonlocality in chemical space. In addition, the same representation allows us to predict accurate electronic properties of molecules, such as their polarizability and molecular frontier orbital energies. PMID:26113956
Montoya-Castillo, Andrés; Reichman, David R.
2017-02-01
The ability to efficiently and accurately calculate equilibrium time correlation functions of many-body condensed phase quantum systems is one of the outstanding problems in theoretical chemistry. The Nakajima-Zwanzig-Mori formalism coupled to the self-consistent solution of the memory kernel has recently proven to be highly successful for the computation of nonequilibrium dynamical averages. Here, we extend this formalism to treat symmetrized equilibrium time correlation functions for the spin-boson model. Following the first paper in this series [A. Montoya-Castillo and D. R. Reichman, J. Chem. Phys. 144, 184104 (2016)], we use a Dyson-type expansion of the projected propagator to obtain a self-consistent solution for the memory kernel that requires only the calculation of normally evolved auxiliary kernels. We employ the approximate mean-field Ehrenfest method to demonstrate the feasibility of this approach. Via comparison with numerically exact results for the correlation function Cz z(t ) =Re ⟨σz(0 ) σz(t ) ⟩ , we show that the current scheme affords remarkable boosts in accuracy and efficiency over bare Ehrenfest dynamics. We further explore the sensitivity of the resulting dynamics to the choice of kernel closures and the accuracy of the initial canonical density operator.
Montoya-Castillo, Andrés; Reichman, David R
2017-02-28
The ability to efficiently and accurately calculate equilibrium time correlation functions of many-body condensed phase quantum systems is one of the outstanding problems in theoretical chemistry. The Nakajima-Zwanzig-Mori formalism coupled to the self-consistent solution of the memory kernel has recently proven to be highly successful for the computation of nonequilibrium dynamical averages. Here, we extend this formalism to treat symmetrized equilibrium time correlation functions for the spin-boson model. Following the first paper in this series [A. Montoya-Castillo and D. R. Reichman, J. Chem. Phys. 144, 184104 (2016)], we use a Dyson-type expansion of the projected propagator to obtain a self-consistent solution for the memory kernel that requires only the calculation of normally evolved auxiliary kernels. We employ the approximate mean-field Ehrenfest method to demonstrate the feasibility of this approach. Via comparison with numerically exact results for the correlation function Czz(t)=Re⟨σz(0)σz(t)⟩, we show that the current scheme affords remarkable boosts in accuracy and efficiency over bare Ehrenfest dynamics. We further explore the sensitivity of the resulting dynamics to the choice of kernel closures and the accuracy of the initial canonical density operator.
Non-equilibrium effects in high temperature chemical reactions
Johnson, Richard E.
1987-01-01
Reaction rate data were collected for chemical reactions occurring at high temperatures during reentry of space vehicles. The principle of detailed balancing is used in modeling kinetics of chemical reactions at high temperatures. Although this principle does not hold for certain transient or incubation times in the initial phase of the reaction, it does seem to be valid for the rates of internal energy transitions that occur within molecules and atoms. That is, for every rate of transition within the internal energy states of atoms or molecules, there is an inverse rate that is related through an equilibrium expression involving the energy difference of the transition.
Exploring Chemical Equilibrium with Poker Chips: A General Chemistry Laboratory Exercise
Bindel, Thomas H.
2012-01-01
A hands-on laboratory exercise at the general chemistry level introduces students to chemical equilibrium through a simulation that uses poker chips and rate equations. More specifically, the exercise allows students to explore reaction tables, dynamic chemical equilibrium, equilibrium constant expressions, and the equilibrium constant based on…
Exploring Chemical Equilibrium with Poker Chips: A General Chemistry Laboratory Exercise
Bindel, Thomas H.
2012-01-01
A hands-on laboratory exercise at the general chemistry level introduces students to chemical equilibrium through a simulation that uses poker chips and rate equations. More specifically, the exercise allows students to explore reaction tables, dynamic chemical equilibrium, equilibrium constant expressions, and the equilibrium constant based on…
Accurate DOSY measure of out-of-equilibrium systems by permutated DOSY (p-DOSY)
Oikonomou, Maria; Velders, Aldrik H; Delsuc, Marc-André
2015-01-01
NMR spectroscopy is a perfect tool for monitoring in-situ chemical reactions. In particular, DOSY measurement is well suited to characterize transient species by the determination of their sizes. However, here we bring to light a difficulty in the DOSY experiments performed on out-of-equilibrium systems. On such a system, the evolution of the concentration of species interferes with the measurement process, and creates a bias on the diffusion coefficient determination that may lead to erroneous interpretations. We show that a random permutation of the series of gradient strengths used during the DOSY experiment allows to average out this bias. This approach, that we name p-DOSY does not require changes in the the pulse sequences nor in the processing software, and restores completely the full accuracy of the measure. This technique is demonstrated on the monitoring of the anomerization reaction of $\\alpha$ to $\\beta$ glucose.
Chemical equilibrium in high pressure molecular fluid mixtures
Energy Technology Data Exchange (ETDEWEB)
Shaw, M.S.
1993-09-01
The N{sub atoms}PT Monte Carlo simulation method has been reformulated to incorporate multiple species and chemical reactions with changes in total number of molecules. While maintaining a constant number of each type of atom, the number of molecules is changed by turning on and off the interactions of any particular position with other molecules. Chemical reactions are allowed as a correlated move of atoms to differnt molecular locations. Equilibrium chemical composition is determined as an average over the simulation along with equation of state quantities. A large set of simulations has been made with the system N{sub 2} + O{sub 2} {rightleftharpoons} NO covering a wide range in P and T. Both Hugoniot states and the CJ point have been determined and are shown to be sensitive to the potentials between unlike species.
Quilez-Pardo, Juan; Solaz-Portoles, Joan Josep
1995-01-01
Study of strategies and procedures of 170 students and 40 teachers when solving chemical equilibrium problems found misconceptions emerging through: misapplication of Le Chatelier's Principle, use of rote-learning recall, incorrect control of variables, limited use of chemical equilibrium law, lack of mastery of chemical equilibrium principles,…
Chemical Reactions Using a Non-Equilibrium Wigner Function Approach
Directory of Open Access Journals (Sweden)
Ramón F. Álvarez-Estrada
2016-10-01
Full Text Available A three-dimensional model of binary chemical reactions is studied. We consider an ab initio quantum two-particle system subjected to an attractive interaction potential and to a heat bath at thermal equilibrium at absolute temperature T > 0 . Under the sole action of the attraction potential, the two particles can either be bound or unbound to each other. While at T = 0 , there is no transition between both states, such a transition is possible when T > 0 (due to the heat bath and plays a key role as k B T approaches the magnitude of the attractive potential. We focus on a quantum regime, typical of chemical reactions, such that: (a the thermal wavelength is shorter than the range of the attractive potential (lower limit on T and (b ( 3 / 2 k B T does not exceed the magnitude of the attractive potential (upper limit on T. In this regime, we extend several methods previously applied to analyze the time duration of DNA thermal denaturation. The two-particle system is then described by a non-equilibrium Wigner function. Under Assumptions (a and (b, and for sufficiently long times, defined by a characteristic time scale D that is subsequently estimated, the general dissipationless non-equilibrium equation for the Wigner function is approximated by a Smoluchowski-like equation displaying dissipation and quantum effects. A comparison with the standard chemical kinetic equations is made. The time τ required for the two particles to transition from the bound state to unbound configurations is studied by means of the mean first passage time formalism. An approximate formula for τ, in terms of D and exhibiting the Arrhenius exponential factor, is obtained. Recombination processes are also briefly studied within our framework and compared with previous well-known methods.
Energy Technology Data Exchange (ETDEWEB)
Horowitz, Jordan M., E-mail: jordan.horowitz@umb.edu [Department of Physics, University of Massachusetts at Boston, Boston, Massachusetts 02125 (United States)
2015-07-28
The stochastic thermodynamics of a dilute, well-stirred mixture of chemically reacting species is built on the stochastic trajectories of reaction events obtained from the chemical master equation. However, when the molecular populations are large, the discrete chemical master equation can be approximated with a continuous diffusion process, like the chemical Langevin equation or low noise approximation. In this paper, we investigate to what extent these diffusion approximations inherit the stochastic thermodynamics of the chemical master equation. We find that a stochastic-thermodynamic description is only valid at a detailed-balanced, equilibrium steady state. Away from equilibrium, where there is no consistent stochastic thermodynamics, we show that one can still use the diffusive solutions to approximate the underlying thermodynamics of the chemical master equation.
Horowitz, Jordan M
2015-07-28
The stochastic thermodynamics of a dilute, well-stirred mixture of chemically reacting species is built on the stochastic trajectories of reaction events obtained from the chemical master equation. However, when the molecular populations are large, the discrete chemical master equation can be approximated with a continuous diffusion process, like the chemical Langevin equation or low noise approximation. In this paper, we investigate to what extent these diffusion approximations inherit the stochastic thermodynamics of the chemical master equation. We find that a stochastic-thermodynamic description is only valid at a detailed-balanced, equilibrium steady state. Away from equilibrium, where there is no consistent stochastic thermodynamics, we show that one can still use the diffusive solutions to approximate the underlying thermodynamics of the chemical master equation.
Minimizing the Free Energy: A Computer Method for Teaching Chemical Equilibrium Concepts.
Heald, Emerson F.
1978-01-01
Presents a computer method for teaching chemical equilibrium concepts using material balance conditions and the minimization of the free energy. Method for the calculation of chemical equilibrium, the computer program used to solve equilibrium problems and applications of the method are also included. (HM)
How accurate are the nonlinear chemical Fokker-Planck and chemical Langevin equations?
Grima, Ramon; Thomas, Philipp; Straube, Arthur V
2011-08-28
The chemical Fokker-Planck equation and the corresponding chemical Langevin equation are commonly used approximations of the chemical master equation. These equations are derived from an uncontrolled, second-order truncation of the Kramers-Moyal expansion of the chemical master equation and hence their accuracy remains to be clarified. We use the system-size expansion to show that chemical Fokker-Planck estimates of the mean concentrations and of the variance of the concentration fluctuations about the mean are accurate to order Ω(-3∕2) for reaction systems which do not obey detailed balance and at least accurate to order Ω(-2) for systems obeying detailed balance, where Ω is the characteristic size of the system. Hence, the chemical Fokker-Planck equation turns out to be more accurate than the linear-noise approximation of the chemical master equation (the linear Fokker-Planck equation) which leads to mean concentration estimates accurate to order Ω(-1∕2) and variance estimates accurate to order Ω(-3∕2). This higher accuracy is particularly conspicuous for chemical systems realized in small volumes such as biochemical reactions inside cells. A formula is also obtained for the approximate size of the relative errors in the concentration and variance predictions of the chemical Fokker-Planck equation, where the relative error is defined as the difference between the predictions of the chemical Fokker-Planck equation and the master equation divided by the prediction of the master equation. For dimerization and enzyme-catalyzed reactions, the errors are typically less than few percent even when the steady-state is characterized by merely few tens of molecules.
Clouds in Super-Earth Atmospheres: Chemical Equilibrium Calculations
Mbarek, Rostom
2016-01-01
Recent studies have unequivocally proven the existence of clouds in super-Earth atmospheres (Kreidberg et al. 2014). Here we provide a theoretical context for the formation of super-Earth clouds by determining which condensates are likely to form under the assumption of chemical equilibrium. We study super-Earth atmospheres of diverse bulk composition, which are assumed to form by outgassing from a solid core of chondritic material, following Schaefer & Fegley (2010). The super-Earth atmospheres that we study arise from planetary cores made up of individual types of chondritic meteorites. They range from highly reducing to oxidizing and have carbon to oxygen (C:O) ratios that are both subsolar and super-solar, thereby spanning a range of atmospheric composition that is appropriate for low-mass exoplanets. Given the atomic makeup of these atmospheres, we minimize the global Gibbs free energy of formation for over 550 gases and condensates to obtain the molecular composition of the atmospheres over a temper...
Bowler, Michael G; Bowler, Matthew W
2016-01-01
The equilibrium relative humidity values for a number of the most commonly used precipitants in biological macromolecule crystallisation have been measured using a new humidity control device. A simple argument in statistical mechanics demonstrates that the saturated vapour pressure of a solvent is proportional to its mole fraction in an ideal solution (Raoult's Law). The same argument can be extended to the case where solvent and solute molecules are of different size.
CHEMICAL EQUILIBRIUM OF SOIL SOLUTION IN STEPPE ZONE SOIL
Directory of Open Access Journals (Sweden)
A. A. Batukaev
2014-01-01
Full Text Available Dynamics of material composition, migration and accumulation of salts is determined by chemical equilibrium in soil solution. Soil solution contains associated electrically neutral ion pairs CaCO_{3}^{0}; CaSO_{4}^{0}, MgCO_{3}^{0}, MgSO_{4}^{0}, charged ion pairs CaHCO_{3}^{+}, MgHCO_{3}^{+}, NaCO_{3}^{-}, NaSO_{4}^{-}, CaOH^{+}, MgOH^{+}. Calculation method is proposed for quantitative assessment of real ion forms in the soil solution of chestnut solonetz soil complex. Were proposed equations to calculate free and associated forms of ions. To solve the equations were used an iteration, a linear interpolation of equilibrium constants, a Method of Ionic Pairs including a law of initial concentration preservation, a law of the operating masses of equilibrium system, the concentration constants of ion pair dissociation on the law of operating masses. Was determined the quantity of ion free form and a coefficient of ion association as ratio of ions free form to analytical content ?_{e} = C_{ass}/C_{an}. The association of ions varies in individual soils and soil layer. Increasing soil solution salinity amplifies the ions association. In form of ionic pairs in soil solution are: 11.8-53.8% of Ca^{2+}; 9.4-57.3% of Mg^{2+}; 0.7-11.9% of Na^{+}; 2.2-22.3% of HCO_{3}^{-}, 11.8-62.7% of SO_{4}^{2-}. The ion CO_{3}^{2-} is high associated, the share of ions in associated form is up to 92.7%. The degree of soil solution saturation was obtained for three level of approximation accounting on analytical concentration, calculated association coefficient, calculated coefficient of association. Relating to thermodynamic solubility product S_{0}, the mathematical product of analytical ionic pairs
Energy Technology Data Exchange (ETDEWEB)
Nguyen, H.D.
1991-11-01
Several of the technologies being evaluated for the treatment of waste material involve chemical reactions. Our example is the in situ vitrification (ISV) process where electrical energy is used to melt soil and waste into a ``glass like`` material that immobilizes and encapsulates any residual waste. During the ISV process, various chemical reactions may occur that produce significant amounts of products which must be contained and treated. The APOLLO program was developed to assist in predicting the composition of the gases that are formed. Although the development of this program was directed toward ISV applications, it should be applicable to other technologies where chemical reactions are of interest. This document presents the mathematical methodology of the APOLLO computer code. APOLLO is a computer code that calculates the products of both equilibrium and kinetic chemical reactions. The current version, written in FORTRAN, is readily adaptable to existing transport programs designed for the analysis of chemically reacting flow systems. Separate subroutines EQREACT and KIREACT for equilibrium ad kinetic chemistry respectively have been developed. A full detailed description of the numerical techniques used, which include both Lagrange multiplies and a third-order integrating scheme is presented. Sample test problems are presented and the results are in excellent agreement with those reported in the literature.
Energy Technology Data Exchange (ETDEWEB)
Nguyen, H.D.
1991-11-01
Several of the technologies being evaluated for the treatment of waste material involve chemical reactions. Our example is the in situ vitrification (ISV) process where electrical energy is used to melt soil and waste into a glass like'' material that immobilizes and encapsulates any residual waste. During the ISV process, various chemical reactions may occur that produce significant amounts of products which must be contained and treated. The APOLLO program was developed to assist in predicting the composition of the gases that are formed. Although the development of this program was directed toward ISV applications, it should be applicable to other technologies where chemical reactions are of interest. This document presents the mathematical methodology of the APOLLO computer code. APOLLO is a computer code that calculates the products of both equilibrium and kinetic chemical reactions. The current version, written in FORTRAN, is readily adaptable to existing transport programs designed for the analysis of chemically reacting flow systems. Separate subroutines EQREACT and KIREACT for equilibrium ad kinetic chemistry respectively have been developed. A full detailed description of the numerical techniques used, which include both Lagrange multiplies and a third-order integrating scheme is presented. Sample test problems are presented and the results are in excellent agreement with those reported in the literature.
The Adverse Effects of Le Chatelier's Principle on Teacher Understanding of Chemical Equilibrium
Cheung, Derek
2009-01-01
Although the scientific inadequacy of Le Chatelier's principle has long been documented in the literature, the principle is still treated as a central concept of chemical equilibrium by textbook writers and teachers in many countries. In the past, researchers' interest has focused on student misconceptions about chemical equilibrium and has…
A Colorful Demonstration to Visualize and Inquire into Essential Elements of Chemical Equilibrium
Eilks, Ingo; Gulacar, Ozcan
2016-01-01
One of the topics that chemistry teachers have a great challenge introducing is chemical equilibrium. When being introduced to chemical equilibrium, many students have difficulties in understanding that some reactions do not go to completion, as this contrasts most of their supposed prior experiences in chemistry lessons. Students may also…
Clouds in Super-Earth Atmospheres: Chemical Equilibrium Calculations
Mbarek, Rostom; Kempton, Eliza M.-R.
2016-08-01
Recent studies have unequivocally proven the existence of clouds in super-Earth atmospheres. Here we provide a theoretical context for the formation of super-Earth clouds by determining which condensates are likely to form under the assumption of chemical equilibrium. We study super-Earth atmospheres of diverse bulk composition, which are assumed to form by outgassing from a solid core of chondritic material, following Schaefer & Fegley. The super-Earth atmospheres that we study arise from planetary cores made up of individual types of chondritic meteorites. They range from highly reducing to oxidizing and have carbon to oxygen (C:O) ratios that are both sub-solar and super-solar, thereby spanning a range of atmospheric composition that is appropriate for low-mass exoplanets. Given the atomic makeup of these atmospheres, we minimize the global Gibbs free energy of formation for over 550 gases and condensates to obtain the molecular composition of the atmospheres over a temperature range of 350-3000 K. Clouds should form along the temperature-pressure boundaries where the condensed species appear in our calculation. We find that the composition of condensate clouds depends strongly on both the H:O and C:O ratios. For the super-Earth archetype GJ 1214b, KCl and ZnS are the primary cloud-forming condensates at solar composition, in agreement with previous work. However, for oxidizing atmospheres, K2SO4 and ZnO condensates are favored instead, and for carbon-rich atmospheres with super-solar C:O ratios, graphite clouds appear. For even hotter planets, clouds form from a wide variety of rock-forming and metallic species.
Fast and accurate predictions of covalent bonds in chemical space
Chang, K. Y. Samuel; Fias, Stijn; Ramakrishnan, Raghunathan; von Lilienfeld, O. Anatole
2016-05-01
We assess the predictive accuracy of perturbation theory based estimates of changes in covalent bonding due to linear alchemical interpolations among molecules. We have investigated σ bonding to hydrogen, as well as σ and π bonding between main-group elements, occurring in small sets of iso-valence-electronic molecules with elements drawn from second to fourth rows in the p-block of the periodic table. Numerical evidence suggests that first order Taylor expansions of covalent bonding potentials can achieve high accuracy if (i) the alchemical interpolation is vertical (fixed geometry), (ii) it involves elements from the third and fourth rows of the periodic table, and (iii) an optimal reference geometry is used. This leads to near linear changes in the bonding potential, resulting in analytical predictions with chemical accuracy (˜1 kcal/mol). Second order estimates deteriorate the prediction. If initial and final molecules differ not only in composition but also in geometry, all estimates become substantially worse, with second order being slightly more accurate than first order. The independent particle approximation based second order perturbation theory performs poorly when compared to the coupled perturbed or finite difference approach. Taylor series expansions up to fourth order of the potential energy curve of highly symmetric systems indicate a finite radius of convergence, as illustrated for the alchemical stretching of H 2+ . Results are presented for (i) covalent bonds to hydrogen in 12 molecules with 8 valence electrons (CH4, NH3, H2O, HF, SiH4, PH3, H2S, HCl, GeH4, AsH3, H2Se, HBr); (ii) main-group single bonds in 9 molecules with 14 valence electrons (CH3F, CH3Cl, CH3Br, SiH3F, SiH3Cl, SiH3Br, GeH3F, GeH3Cl, GeH3Br); (iii) main-group double bonds in 9 molecules with 12 valence electrons (CH2O, CH2S, CH2Se, SiH2O, SiH2S, SiH2Se, GeH2O, GeH2S, GeH2Se); (iv) main-group triple bonds in 9 molecules with 10 valence electrons (HCN, HCP, HCAs, HSiN, HSi
Huré, J.-M.; Hersant, F.
2017-02-01
We compute the structure of a self-gravitating torus with polytropic equation of state (EOS) rotating in an imposed centrifugal potential. The Poisson solver is based on isotropic multigrid with optimal covering factor (fluid section-to-grid area ratio). We work at second order in the grid resolution for both finite difference and quadrature schemes. For soft EOS (i.e. polytropic index n ≥ 1), the underlying second order is naturally recovered for boundary values and any other integrated quantity sensitive to the mass density (mass, angular momentum, volume, virial parameter, etc.), i.e. errors vary with the number N of nodes per direction as ˜1/N2. This is, however, not observed for purely geometrical quantities (surface area, meridional section area, volume), unless a subgrid approach is considered (i.e. boundary detection). Equilibrium sequences are also much better described, especially close to critical rotation. Yet another technical effort is required for hard EOS (n < 1), due to infinite mass density gradients at the fluid surface. We fix the problem by using kernel splitting. Finally, we propose an accelerated version of the self-consistent field (SCF) algorithm based on a node-by-node pre-conditioning of the mass density at each step. The computing time is reduced by a factor of 2 typically, regardless of the polytropic index. There is a priori no obstacle to applying these results and techniques to ellipsoidal configurations and even to 3D configurations.
Effect of a Perturbation on the Chemical Equilibrium: Comparison with Le Chatelier's Principle
Torres, Emilio Martinez
2007-01-01
This article develops a general thermodynamic treatment to predict the direction of shift in a chemical equilibrium when it is subjected to a stress. This treatment gives an inequality that relates the change in the perturbed variable and the change that the equilibrium shift produces in the conjugated variable. To illustrate the generality of…
General multi-group macroscopic modeling for thermo-chemical non-equilibrium gas mixtures
Energy Technology Data Exchange (ETDEWEB)
Liu, Yen, E-mail: yen.liu@nasa.gov; Vinokur, Marcel [NASA Ames Research Center, Moffett Field, California 94035 (United States); Panesi, Marco; Sahai, Amal [University of Illinois, Urbana-Champaign, Illinois 61801 (United States)
2015-04-07
This paper opens a new door to macroscopic modeling for thermal and chemical non-equilibrium. In a game-changing approach, we discard conventional theories and practices stemming from the separation of internal energy modes and the Landau-Teller relaxation equation. Instead, we solve the fundamental microscopic equations in their moment forms but seek only optimum representations for the microscopic state distribution function that provides converged and time accurate solutions for certain macroscopic quantities at all times. The modeling makes no ad hoc assumptions or simplifications at the microscopic level and includes all possible collisional and radiative processes; it therefore retains all non-equilibrium fluid physics. We formulate the thermal and chemical non-equilibrium macroscopic equations and rate coefficients in a coupled and unified fashion for gases undergoing completely general transitions. All collisional partners can have internal structures and can change their internal energy states after transitions. The model is based on the reconstruction of the state distribution function. The internal energy space is subdivided into multiple groups in order to better describe non-equilibrium state distributions. The logarithm of the distribution function in each group is expressed as a power series in internal energy based on the maximum entropy principle. The method of weighted residuals is applied to the microscopic equations to obtain macroscopic moment equations and rate coefficients succinctly to any order. The model’s accuracy depends only on the assumed expression of the state distribution function and the number of groups used and can be self-checked for accuracy and convergence. We show that the macroscopic internal energy transfer, similar to mass and momentum transfers, occurs through nonlinear collisional processes and is not a simple relaxation process described by, e.g., the Landau-Teller equation. Unlike the classical vibrational energy
General multi-group macroscopic modeling for thermo-chemical non-equilibrium gas mixtures
Liu, Yen; Panesi, Marco; Sahai, Amal; Vinokur, Marcel
2015-04-01
This paper opens a new door to macroscopic modeling for thermal and chemical non-equilibrium. In a game-changing approach, we discard conventional theories and practices stemming from the separation of internal energy modes and the Landau-Teller relaxation equation. Instead, we solve the fundamental microscopic equations in their moment forms but seek only optimum representations for the microscopic state distribution function that provides converged and time accurate solutions for certain macroscopic quantities at all times. The modeling makes no ad hoc assumptions or simplifications at the microscopic level and includes all possible collisional and radiative processes; it therefore retains all non-equilibrium fluid physics. We formulate the thermal and chemical non-equilibrium macroscopic equations and rate coefficients in a coupled and unified fashion for gases undergoing completely general transitions. All collisional partners can have internal structures and can change their internal energy states after transitions. The model is based on the reconstruction of the state distribution function. The internal energy space is subdivided into multiple groups in order to better describe non-equilibrium state distributions. The logarithm of the distribution function in each group is expressed as a power series in internal energy based on the maximum entropy principle. The method of weighted residuals is applied to the microscopic equations to obtain macroscopic moment equations and rate coefficients succinctly to any order. The model's accuracy depends only on the assumed expression of the state distribution function and the number of groups used and can be self-checked for accuracy and convergence. We show that the macroscopic internal energy transfer, similar to mass and momentum transfers, occurs through nonlinear collisional processes and is not a simple relaxation process described by, e.g., the Landau-Teller equation. Unlike the classical vibrational energy
DEFF Research Database (Denmark)
Gamst, Jesper; Kjeldsen, Peter; Christensen, Thomas Højlund
2007-01-01
Groundwater risk assessment of contaminated soils implies determination of the solute concentration leaching out of the soil. Determination based on estimation techniques or simple experimental batch approach has proven inadequate. Two chemical equilibrium soil column leaching tests...... for determination of solute concentration in a contaminated soil were developed; (1) a chemical Equilibrium and Recirculation column test for Volatile organic chemicals (ER-V) and (2) a chemical Equilibrium and Recirculation column test for Hydrophobic organic chemicals (ER-H). The two test systems were evaluated...... to measure solute phase concentration of PAHs in contaminated soils. Overall a reliable and reproducable system for determining solute concentration of a wide range of organic compounds in contaminated soils has been developed....
The chemical potential of magnons in quasi-equilibrium
Energy Technology Data Exchange (ETDEWEB)
Bennett, L.H. [George Washington University, Washington, DC 20052 (United States)], E-mail: lbennett@gwu.edu; Della Torre, E. [George Washington University, Washington, DC 20052 (United States)
2008-02-01
There have been many questions raised as to the existence of a non-zero chemical potential in a system of quasiparticles, such as magnons, which can be created and destroyed in an open system. In this paper, we spell out the reasons that there is, in fact, a non-zero chemical potential for magnons, and that it can be determined from magnetic aftereffect experiments.
Energy Technology Data Exchange (ETDEWEB)
Nikolaeva, L.S.; Prikhod' ko, N.V.; Evseev, A.M.; Rozen, A.M.; Kolychev, A.E.; Gontar, B.G. (Moskovskij Gosudarstvennyj Univ. (USSR). Khimicheskij Fakul' tet)
1982-07-01
Using as an example regression models of extraction systems HNO/sub 3/-TBP-H/sub 2/O, UO/sub 2/(NO/sub 3/)/sub 2/-TBP-H/sub 2/O it has been shown that disregard of errors of the controlled (independent) variables 3% measurement error of UO/sub 2/(NO/sub 3/)/sub 2/ equilibrium concentration and 3% error of the determination of HNO/sub 3/ activity coefficient results in the displacement of evaluations of certain equilibria constants and leads to incorrect conclusion on the mechanism of chemical equilibria.
Directory of Open Access Journals (Sweden)
E. Montagna
2014-08-01
Full Text Available Chemical Equilibrium misconceptions impaired the learning of many biochemicalundergraduate content. It was widely reinforced by chemical education data. On the otherhand there was no data for the consequences in biochemistry learning. OBJECTIVE Weproposed the construction of an Aminoacid Paper Electrophoresis software as a tool forChemical Equilibrium teaching and learning which aims to integrate the representationallevels, being macroscopic, microscopic and symbolic in a way to evidence to student thedynamic character of the equilibrium phenomena. It attenuates misconceptions andreduces impairments on biochemistry learning. Although the simulator is based onclassical biochemistry topic it is designed to deal with chemical equilibrium concepts in thecontext of biochemistry. MATERIALS AND METHODS: The software is an PaperElectrophoresis Simulator programmed in HTML5 language. It guides the student stepstoward the simulation showing the technique fundamentals and variables allowing tochoose aminoacids in a list, as well as build even tetrapeptides and run even four samplesin a single simulation after what is defined a pH for simulation. The simulation results areshown in a depiction of a paper electrophoresis device (macroscopic the speciesproportion in the medium based on the Handerson-Hasselbalch formula (symbolic and thespecies charge change based on the medium pH (microscopic. All activities are guided bya task list based on previous diagnostic on chemical equilibrium misconceptions.RESULTS AND DISCUSSION: Results were based on observation of students classdiscussion and survey. Many of previously diagnosed misconceptions were attenuated intests of chemical equilibrium falling from a 72% to 35% error average; and a studentssurvey agreed with simulator objectives (90%, ease of use (94%, chemicalrepresentations straightness (82%, simulation results (71% integration ofrepresentational levels (87%. CONCLUSIONS: Students declared the software
Computing multi-species chemical equilibrium with an algorithm based on the reaction extents
DEFF Research Database (Denmark)
Paz-Garcia, Juan Manuel; Johannesson, Björn; Ottosen, Lisbeth M.;
2013-01-01
A mathematical model for the solution of a set of chemical equilibrium equations in a multi-species and multiphase chemical system is described. The computer-aid solution of model is achieved by means of a Newton-Raphson method enhanced with a line-search scheme, which deals with the non-negative...
A Unified Graphical Representation of Chemical Thermodynamics and Equilibrium
Hanson, Robert M.
2012-01-01
During the years 1873-1879, J. Willard Gibbs published his now-famous set of articles that form the basis of the current perspective on chemical thermodynamics. The second article of this series, "A Method of Geometrical Representation of the Thermodynamic Properties of Substances by Means of Surfaces," published in 1873, is particularly notable…
A Unified Graphical Representation of Chemical Thermodynamics and Equilibrium
Hanson, Robert M.
2012-01-01
During the years 1873-1879, J. Willard Gibbs published his now-famous set of articles that form the basis of the current perspective on chemical thermodynamics. The second article of this series, "A Method of Geometrical Representation of the Thermodynamic Properties of Substances by Means of Surfaces," published in 1873, is particularly notable…
Direct Monte Carlo simulation of the chemical equilibrium composition of detonation products
Energy Technology Data Exchange (ETDEWEB)
Shaw, M.S.
1993-06-01
A new Monte Carlo simulation method has been developed by the author which gives the equilibrium chemical composition of a molecular fluid directly. The usual NPT ensemble (isothermal-isobaric) is implemented with N being the number of atoms instead of molecules. Changes in chemical composition are treated as correlated spatial moves of atoms. Given the interaction potentials between molecular products, ``exact`` EOS points including the equilibrium chemical composition can be determined from the simulations. This method is applied to detonation products at conditions in the region near the Chapman- Jouget state. For the example of NO, it is shown that the CJ detonation velocity can be determined to a few meters per second. A rather small change in cross potentials is shown to shift the chemical equilibrium and the CJ conditions significantly.
How accurate are the European Union's classifications of chemical substances.
Rudén, Christina; Hansson, Sven Ove
2003-09-30
The European Commission has decided on harmonized classifications for a large number of individual chemicals according to its own directive for classification and labeling of dangerous substances. We have compared the harmonized classifications for acute oral toxicity to the acute oral toxicity data available in the RTECS database. Of the 992 substances eligible for this comparison, 15% were assigned a too low danger class and 8% a too high danger class according to the RTECS data. Due to insufficient transparency-scientific documentations of the classification decisions are not available-the causes of this discrepancy can only be hypothesized. We propose that the scientific motivations of future classifications be published and that the apparent over- and underclassifications in the present system be either explained or rectified, according to what are the facts in the matter.
Göppel, Tobias; Palyulin, Vladimir V; Gerland, Ulrich
2016-07-27
An out-of-equilibrium physical environment can drive chemical reactions into thermodynamically unfavorable regimes. Under prebiotic conditions such a coupling between physical and chemical non-equilibria may have enabled the spontaneous emergence of primitive evolutionary processes. Here, we study the coupling efficiency within a theoretical model that is inspired by recent laboratory experiments, but focuses on generic effects arising whenever reactant and product molecules have different transport coefficients in a flow-through system. In our model, the physical non-equilibrium is represented by a drift-diffusion process, which is a valid coarse-grained description for the interplay between thermophoresis and convection, as well as for many other molecular transport processes. As a simple chemical reaction, we consider a reversible dimerization process, which is coupled to the transport process by different drift velocities for monomers and dimers. Within this minimal model, the coupling efficiency between the non-equilibrium transport process and the chemical reaction can be analyzed in all parameter regimes. The analysis shows that the efficiency depends strongly on the Damköhler number, a parameter that measures the relative timescales associated with the transport and reaction kinetics. Our model and results will be useful for a better understanding of the conditions for which non-equilibrium environments can provide a significant driving force for chemical reactions in a prebiotic setting.
Degree of Chemical Non-equilibrium in Central Au-Au Collisions at RHIC energies
Tawfik, Abdel Nasser; Habashy, D M; Mohamed, M T; Abbas, Ehab
2014-01-01
We investigate the difference between hadron resonance gas (HRG) calculations for chemical freeze-out parameters at fully and partly chemical equilibria. To this end, the results are compared with the particle ratios measured in central Au-Au collisions at a wide range of nucleon-nucleon center-of-mass energies, \\hbox{$\\sqrt{s_{NN}}=7.7-200 $GeV} as offered by the STAR experiment. We restrict the discussion to STAR, because of large statistics and overall homogeneity of STAR measurements (one detector) against previous experiments. We find that the matter produced at these energies is likely in fully chemical equilibrium, which is consistent with recent lattice QCD results. The possible improvements by partial chemical equilibrium ($\\gamma_S\
Voituriez, R.; Moreau, M.; Oshanin, G.
2004-01-01
The validity of two fundamental concepts of classical chemical kinetics - the notion of "Chemical Equilibrium" and the "Law of Mass Action" - are re-examined for reversible \\textit{diffusion-limited} reactions (DLR), as exemplified here by association/dissociation $A+A \\rightleftharpoons B$ reactions. We consider a general model of long-ranged reactions, such that any pair of $A$ particles, separated by distance $\\mu$, may react with probability $\\omega_+(\\mu)$, and any $B$ may dissociate wit...
Control of Chemical Equilibrium by Solvent: A Basis for Teaching Physical Chemistry of Solutions
Prezhdo, Oleg V.; Craig, Colleen F.; Fialkov, Yuriy; Prezhdo, Victor V.
2007-01-01
The study demonstrates that the solvent present in a system can highly alter and control the chemical equilibrium of a system. The results show that the dipole moment and polarizibility of a system can be highly altered by using different mixed solvents.
A Teaching Sequence for Learning the Concept of Chemical Equilibrium in Secondary School Education
Ghirardi, Marco; Marchetti, Fabio; Pettinari, Claudio; Regis, Alberto; Roletto, Ezio
2014-01-01
A novel didactic sequence is proposed for the teaching of chemical equilibrium. This teaching sequence takes into account the historical and epistemological evolution of the concept, the alternative conceptions and learning difficulties highlighted by teaching science and research in education, and the need to focus on both the students'…
Aydeniz, Mehmet; Dogan, Alev
2016-01-01
This study examines the impact of argumentation on pre-service science teachers' (PST) conceptual understanding of chemical equilibrium. The sample consisted of 57 first-year PSTs enrolled in a teacher education program in Turkey. Thirty two of the 57 PSTs who participated in this study were in the experimental group and 25 in the control group.…
A Teaching Sequence for Learning the Concept of Chemical Equilibrium in Secondary School Education
Ghirardi, Marco; Marchetti, Fabio; Pettinari, Claudio; Regis, Alberto; Roletto, Ezio
2014-01-01
A novel didactic sequence is proposed for the teaching of chemical equilibrium. This teaching sequence takes into account the historical and epistemological evolution of the concept, the alternative conceptions and learning difficulties highlighted by teaching science and research in education, and the need to focus on both the students'…
Gordon, Sanford; Mcbride, Bonnie J.
1994-01-01
This report presents the latest in a number of versions of chemical equilibrium and applications programs developed at the NASA Lewis Research Center over more than 40 years. These programs have changed over the years to include additional features and improved calculation techniques and to take advantage of constantly improving computer capabilities. The minimization-of-free-energy approach to chemical equilibrium calculations has been used in all versions of the program since 1967. The two principal purposes of this report are presented in two parts. The first purpose, which is accomplished here in part 1, is to present in detail a number of topics of general interest in complex equilibrium calculations. These topics include mathematical analyses and techniques for obtaining chemical equilibrium; formulas for obtaining thermodynamic and transport mixture properties and thermodynamic derivatives; criteria for inclusion of condensed phases; calculations at a triple point; inclusion of ionized species; and various applications, such as constant-pressure or constant-volume combustion, rocket performance based on either a finite- or infinite-chamber-area model, shock wave calculations, and Chapman-Jouguet detonations. The second purpose of this report, to facilitate the use of the computer code, is accomplished in part 2, entitled 'Users Manual and Program Description'. Various aspects of the computer code are discussed, and a number of examples are given to illustrate its versatility.
Grodzka, P.; Facemire, B.
1977-01-01
Three investigations conducted aboard Skylab IV and Apollo-Soyuz involved phenomena that are of interest to the biochemistry community. The formaldehyde clock reaction and the equilibrium shift reaction experiments conducted aboard Apollo Soyuz demonstrate the effect of low-g foams or air/liquid dispersions on reaction rate and chemical equilibrium. The electrodeposition reaction experiment conducted aboard Skylab IV demonstrate the effect of a low-g environment on an electrochemical displacement reaction. The implications of the three space experiments for various applications are considered.
Sampath Kumar, Bharath
The purpose of this study is to examine the role of partnering visualization tool such as simulation towards development of student's concrete conceptual understanding of chemical equilibrium. Students find chemistry concepts abstract, especially at the microscopic level. Chemical equilibrium is one such topic. While research studies have explored effectiveness of low tech instructional strategies such as analogies, jigsaw, cooperative learning, and using modeling blocks, fewer studies have explored the use of visualization tool such as simulations in the context of dynamic chemical equilibrium. Research studies have identified key reasons behind misconceptions such as lack of systematic understanding of foundational chemistry concepts, failure to recognize the system is dynamic, solving numerical problems on chemical equilibrium in an algorithmic fashion, erroneous application Le Chatelier's principle (LCP) etc. Kress et al. (2001) suggested that external representation in the form of visualization is more than a tool for learning, because it enables learners to make meanings or express their ideas which cannot be readily done so through a verbal representation alone. Mixed method study design was used towards data collection. The qualitative portion of the study is aimed towards understanding the change in student's mental model before and after the intervention. A quantitative instrument was developed based on common areas of misconceptions identified by research studies. A pilot study was conducted prior to the actual study to obtain feedback from students on the quantitative instrument and the simulation. Participants for the pilot study were sampled from a single general chemistry class. Following the pilot study, the research study was conducted with a total of 27 students (N=15 in experimental group and N=12 in control group). Prior to participating in the study, students have completed their midterm test on the topic of chemical equilibrium. Qualitative
Horowitz, Jordan M.
2015-01-01
The stochastic thermodynamics of a dilute, well-stirred mixture of chemically-reacting species is built on the stochastic trajectories of reaction events obtained from the Chemical Master Equation. However, when the molecular populations are large, the discrete Chemical Master Equation can be approximated with a continuous diffusion process, like the Chemical Langevin Equation or Low Noise Approximation. In this paper, we investigate to what extent these diffusion approximations inherit the s...
Viscous-shock-layer solutions for turbulent flow of radiating gas mixtures in chemical equilibrium
Anderson, E. C.; Moss, J. N.
1975-01-01
The viscous-shock-layer equations for hypersonic laminar and turbulent flows of radiating or nonradiating gas mixtures in chemical equilibrium are presented for two-dimensional and axially-symmetric flow fields. Solutions were obtained using an implicit finite-difference scheme and results are presented for hypersonic flow over spherically-blunted cone configurations at freestream conditions representative of entry into the atmosphere of Venus. These data are compared with solutions obtained using other methods of analysis.
Viscous shock layer solutions for turbulent flow of radiating gas mixtures in chemical equilibrium
Anderson, E. C.; Moss, J. N.
1975-01-01
The viscous shock layer equations for hypersonic laminar and turbulent flows of radiating or nonradiating gas mixtures in chemical equilibrium are presented for two-dimensional and axially symmetric flow fields. Solutions are obtained using an implicit finite difference scheme and results are presented for hypersonic flow over spherically blunted cone configurations at free stream conditions representative of entry into the atmosphere of Venus. These data are compared with solutions obtained using other methods of analysis.
Sugiura, Haruka; Ito, Manami; Okuaki, Tomoya; Mori, Yoshihito; Kitahata, Hiroyuki; Takinoue, Masahiro
2016-01-20
The design, construction and control of artificial self-organized systems modelled on dynamical behaviours of living systems are important issues in biologically inspired engineering. Such systems are usually based on complex reaction dynamics far from equilibrium; therefore, the control of non-equilibrium conditions is required. Here we report a droplet open-reactor system, based on droplet fusion and fission, that achieves dynamical control over chemical fluxes into/out of the reactor for chemical reactions far from equilibrium. We mathematically reveal that the control mechanism is formulated as pulse-density modulation control of the fusion-fission timing. We produce the droplet open-reactor system using microfluidic technologies and then perform external control and autonomous feedback control over autocatalytic chemical oscillation reactions far from equilibrium. We believe that this system will be valuable for the dynamical control over self-organized phenomena far from equilibrium in chemical and biomedical studies.
Vellela, Melissa; Qian, Hong
2009-10-06
Schlögl's model is the canonical example of a chemical reaction system that exhibits bistability. Because the biological examples of bistability and switching behaviour are increasingly numerous, this paper presents an integrated deterministic, stochastic and thermodynamic analysis of the model. After a brief review of the deterministic and stochastic modelling frameworks, the concepts of chemical and mathematical detailed balances are discussed and non-equilibrium conditions are shown to be necessary for bistability. Thermodynamic quantities such as the flux, chemical potential and entropy production rate are defined and compared across the two models. In the bistable region, the stochastic model exhibits an exchange of the global stability between the two stable states under changes in the pump parameters and volume size. The stochastic entropy production rate shows a sharp transition that mirrors this exchange. A new hybrid model that includes continuous diffusion and discrete jumps is suggested to deal with the multiscale dynamics of the bistable system. Accurate approximations of the exponentially small eigenvalue associated with the time scale of this switching and the full time-dependent solution are calculated using Matlab. A breakdown of previously known asymptotic approximations on small volume scales is observed through comparison with these and Monte Carlo results. Finally, in the appendix section is an illustration of how the diffusion approximation of the chemical master equation can fail to represent correctly the mesoscopically interesting steady-state behaviour of the system.
Development of a Chemical Equilibrium Model for a Molten Core-Concrete Interaction Analysis Module
Energy Technology Data Exchange (ETDEWEB)
Seo, Jae Uk; Lee, Dae Young; Park, Chang Hwan [FNC Technology Co., Yongin (Korea, Republic of)
2016-10-15
This molten core could interact with the reactor cavity region which consists of concrete. In this process, components of molten core react with components of concrete through a lot of chemical reactions. As a result, many kinds of gas species are generated and those move up forming rising bubbles into the reactor containment atmosphere. These rising bubbles are the carrier of the many kinds of the aerosols coming from the MCCI (Molten Core Concrete Interaction) layers. To evaluate the amount of the aerosols released from the MCCI layers, the amount of the gas species generated from those layers should be calculated. The chemical equilibrium state originally implies the final state of the multiple chemical reactions; therefore, investigating the equilibrium composition of molten core can be applicable to predict the gas generation status. The most common way for finding the chemical equilibrium state is a minimization of total Gibbs free energy of the system. In this paper, the method to make good guess of initial state is suggested and chemical reaction results are compared with results of CSSI report No 164. Total mass of system and the number of atoms of each element are conserved. The tendency of calculation results is similar with results presented in CSNI Report except a few species. These differences may be caused by absence of Gibbs energy data of the species such as Fe{sub 2}SiO{sub 4}, CaFe{sub 2}O{sub 4}, U(OH){sub 3}, UO(OH), UO{sub 2}(OH), U{sub 3}O{sub 7}, La, Ce.
Equilibrium chemical vapor deposition growth of Bernal-stacked bilayer graphene.
Zhao, Pei; Kim, Sungjin; Chen, Xiao; Einarsson, Erik; Wang, Miao; Song, Yenan; Wang, Hongtao; Chiashi, Shohei; Xiang, Rong; Maruyama, Shigeo
2014-11-25
Using ethanol as the carbon source, self-limiting growth of AB-stacked bilayer graphene (BLG) has been achieved on Cu via an equilibrium chemical vapor deposition (CVD) process. We found that during this alcohol catalytic CVD (ACCVD) a source-gas pressure range exists to break the self-limitation of monolayer graphene on Cu, and at a certain equilibrium state it prefers to form uniform BLG with a high surface coverage of ∼94% and AB-stacking ratio of nearly 100%. More importantly, once the BLG is completed, this growth shows a self-limiting manner, and an extended ethanol flow time does not result in additional layers. We investigate the mechanism of this equilibrium BLG growth using isotopically labeled (13)C-ethanol and selective surface aryl functionalization, and results reveal that during the equilibrium ACCVD process a continuous substitution of graphene flakes occurs to the as-formed graphene and the BLG growth follows a layer-by-layer epitaxy mechanism. These phenomena are significantly in contrast to those observed for previously reported BLG growth using methane as precursor.
Bindel, Thomas H.
2010-01-01
Entropy analyses as a function of the extent of reaction are presented for a number of physicochemical processes, including vaporization of a liquid, dimerization of nitrogen dioxide, and the autoionization of water. Graphs of the total entropy change versus the extent of reaction give a visual representation of chemical equilibrium and the second…
Tomba, J. Pablo
2017-01-01
The use of free energy plots to understand the concept of thermodynamic equilibrium has been shown to be of great pedagogical value in materials science. Although chemical equilibrium is also amenable to this kind of analysis, it is not part of the agenda of materials science textbooks. Something similar is found in chemistry branches, where free…
Michaelis, Christopher Harold
2001-07-01
The motion of a gas may be studied from the microscopic or macroscopic point of view. At the microscopic level, molecules are constantly moving and colliding, and occasionally reacting to form new species. The accepted model for describing gases at the microscopic level is the Boltzmann equation. In contrast, macroscopic models rely on the conservation laws, combined with constitutive relations, which approximate the molecular relaxation in a gas. The resulting set of equations, called the Navier- Stokes equations, represent an approximation to the Boltzmann equation for small non-equilibrium. For flows that are sufficiently rarefied, the Navier- Stokes equations no longer represent an accurate approximation of the Boltzmann equation. Numerical solutions of the Boltzmann equation may be obtained through the direct simulation of molecular motion. Such approaches are termed Monte Carlo, or particle methods. In principle, particle methods can be used to simulate all flows, regardless of the degree of non-equilibrium. There are many instances where neither approach is ideal. One such example is the reentry of a blunt body through the atmosphere. Ahead of the body, there is a very strong shock wave that cannot be adequately modeled by the Navier-Stokes equations, due to the degree of non- equilibrium. At the surface of the blunt body, the temperature is substantially colder than the surrounding flow, resulting in a large increase in the density next to the surface. In this region, where the flow is near- continuum, particle methods are not computationally efficient. A numerical method that utilizes the Navier-Stokes equations in regions of near-continuum flow and a particle method everywhere else is ideal. In this study, a hybrid scheme, for the efficient numerical simulation of flows with thermal and chemical non-equilibrium, is successfully demonstrated. The hybrid method was applied to extreme, high Mach number flows, where vibrational and chemical relaxation are
National Aeronautics and Space Administration — This SBIR project proposes to develop a gas-kinetic Navier-Stokes solver for simulation of hypersonic flows in thermal and chemical non-equilibrium. The...
2009-10-01
Beattie - Bridgeman Virial expansion The above equations are suitable for moderate pressures and are usually based on either empirical constants...CR 2010-013 October 2009 A Review of Equation of State Models, Chemical Equilibrium Calculations and CERV Code Requirements for SHS Detonation...Defence R&D Canada. A Review of Equation of State Models, Chemical Equilibrium Calculations and CERV Code Requirements for SHS Detonation
Gokoglu, Suleyman A.
1988-01-01
This paper investigates the role played by vapor-phase chemical reactions on CVD rates by comparing the results of two extreme theories developed to predict CVD mass transport rates in the absence of interfacial kinetic barrier: one based on chemically frozen boundary layer and the other based on local thermochemical equilibrium. Both theories consider laminar convective-diffusion boundary layers at high Reynolds numbers and include thermal (Soret) diffusion and variable property effects. As an example, Na2SO4 deposition was studied. It was found that gas phase reactions have no important role on Na2SO4 deposition rates and on the predictions of the theories. The implications of the predictions of the two theories to other CVD systems are discussed.
Tiwari, Saumya; Reddy, Vijaya B.; Bhargava, Rohit; Raman, Jaishankar
2015-01-01
Rejection is a common problem after cardiac transplants leading to significant number of adverse events and deaths, particularly in the first year of transplantation. The gold standard to identify rejection is endomyocardial biopsy. This technique is complex, cumbersome and requires a lot of expertise in the correct interpretation of stained biopsy sections. Traditional histopathology cannot be used actively or quickly during cardiac interventions or surgery. Our objective was to develop a stain-less approach using an emerging technology, Fourier transform infrared (FT-IR) spectroscopic imaging to identify different components of cardiac tissue by their chemical and molecular basis aided by computer recognition, rather than by visual examination using optical microscopy. We studied this technique in assessment of cardiac transplant rejection to evaluate efficacy in an example of complex cardiovascular pathology. We recorded data from human cardiac transplant patients’ biopsies, used a Bayesian classification protocol and developed a visualization scheme to observe chemical differences without the need of stains or human supervision. Using receiver operating characteristic curves, we observed probabilities of detection greater than 95% for four out of five histological classes at 10% probability of false alarm at the cellular level while correctly identifying samples with the hallmarks of the immune response in all cases. The efficacy of manual examination can be significantly increased by observing the inherent biochemical changes in tissues, which enables us to achieve greater diagnostic confidence in an automated, label-free manner. We developed a computational pathology system that gives high contrast images and seems superior to traditional staining procedures. This study is a prelude to the development of real time in situ imaging systems, which can assist interventionists and surgeons actively during procedures. PMID:25932912
Directory of Open Access Journals (Sweden)
Saumya Tiwari
Full Text Available Rejection is a common problem after cardiac transplants leading to significant number of adverse events and deaths, particularly in the first year of transplantation. The gold standard to identify rejection is endomyocardial biopsy. This technique is complex, cumbersome and requires a lot of expertise in the correct interpretation of stained biopsy sections. Traditional histopathology cannot be used actively or quickly during cardiac interventions or surgery. Our objective was to develop a stain-less approach using an emerging technology, Fourier transform infrared (FT-IR spectroscopic imaging to identify different components of cardiac tissue by their chemical and molecular basis aided by computer recognition, rather than by visual examination using optical microscopy. We studied this technique in assessment of cardiac transplant rejection to evaluate efficacy in an example of complex cardiovascular pathology. We recorded data from human cardiac transplant patients' biopsies, used a Bayesian classification protocol and developed a visualization scheme to observe chemical differences without the need of stains or human supervision. Using receiver operating characteristic curves, we observed probabilities of detection greater than 95% for four out of five histological classes at 10% probability of false alarm at the cellular level while correctly identifying samples with the hallmarks of the immune response in all cases. The efficacy of manual examination can be significantly increased by observing the inherent biochemical changes in tissues, which enables us to achieve greater diagnostic confidence in an automated, label-free manner. We developed a computational pathology system that gives high contrast images and seems superior to traditional staining procedures. This study is a prelude to the development of real time in situ imaging systems, which can assist interventionists and surgeons actively during procedures.
Chemicals loading in acetylated bamboo assisted by supercritical CO2 based on phase equilibrium data
Silviana, Petermann, M.
2015-12-01
Indonesia has a large tropical forest. However, the deforestation still appears annually and vastly. This reason drives a use of bamboo as wood alternative. Recently, there are many modifications of bamboo in order to prolong the shelf life. Unfortunately, the processes need more chemicals and time. Based on wood modification, esterifying of bamboo was undertaken in present of a dense gas, i.e. supercritical CO2. Calculation of chemicals loading referred to ASTM D1413-99 by using the phase equilibrium data at optimum condition by a statistical design. The results showed that the acetylation of bamboo assisted by supercritical CO2 required 14.73 kg acetic anhydride/m3 of bamboo for a treatment of one hour.
Directory of Open Access Journals (Sweden)
R. Rodrigues
Full Text Available Abstract Coal and biomass are energy sources with great potential for use in Brazil. Coal-biomass co-gasification enables the combination of the positive characteristics of each fuel, besides leading to a cleaner use of coal. The present study evaluates the potential of co-gasification of binary coal-biomass blends using sources widely available in Brazil. This analysis employs computational simulations using a reliable thermodynamic equilibrium model. Favorable operational conditions at high temperatures are determined in order to obtain gaseous products suitable for energy cogeneration and chemical synthesis. This study shows that blends with biomass ratios of 5% and equivalence ratios ≤ 0.3 lead to high cold gas efficiencies. Suitable gaseous products for chemical synthesis were identified at biomass ratios ≤ 35% and moisture contents ≥ 40%. Formation of undesirable nitrogen and sulfur compounds was also analyzed.
Huré, J -M
2016-01-01
We compute the structure of a self-gravitating torus with polytropic equation-of-state (EOS) rotating in an imposed centrifugal potential. The Poisson-solver is based on isotropic multigrid with optimal covering factor (fluid section-to-grid area ratio). We work at $2$nd-order in the grid resolution for both finite difference and quadrature schemes. For soft EOS (i.e. polytropic index $n \\ge 1$), the underlying $2$nd-order is naturally recovered for Boundary Values (BVs) and any other integrated quantity sensitive to the mass density (mass, angular momentum, volume, Virial Parameter, etc.), i.e. errors vary with the number $N$ of nodes per direction as $\\sim 1/N^2$. This is, however, not observed for purely geometrical quantities (surface area, meridional section area, volume), unless a subgrid approach is considered (i.e. boundary detection). Equilibrium sequences are also much better described, especially close to critical rotation. Yet another technical effort is required for hard EOS ($n < 1$), due to ...
Microscopic Simulation and Macroscopic Modeling for Thermal and Chemical Non-Equilibrium
Liu, Yen; Panesi, Marco; Vinokur, Marcel; Clarke, Peter
2013-01-01
This paper deals with the accurate microscopic simulation and macroscopic modeling of extreme non-equilibrium phenomena, such as encountered during hypersonic entry into a planetary atmosphere. The state-to-state microscopic equations involving internal excitation, de-excitation, dissociation, and recombination of nitrogen molecules due to collisions with nitrogen atoms are solved time-accurately. Strategies to increase the numerical efficiency are discussed. The problem is then modeled using a few macroscopic variables. The model is based on reconstructions of the state distribution function using the maximum entropy principle. The internal energy space is subdivided into multiple groups in order to better describe the non-equilibrium gases. The method of weighted residuals is applied to the microscopic equations to obtain macroscopic moment equations and rate coefficients. The modeling is completely physics-based, and its accuracy depends only on the assumed expression of the state distribution function and the number of groups used. The model makes no assumption at the microscopic level, and all possible collisional and radiative processes are allowed. The model is applicable to both atoms and molecules and their ions. Several limiting cases are presented to show that the model recovers the classical twotemperature models if all states are in one group and the model reduces to the microscopic equations if each group contains only one state. Numerical examples and model validations are carried out for both the uniform and linear distributions. Results show that the original over nine thousand microscopic equations can be reduced to 2 macroscopic equations using 1 to 5 groups with excellent agreement. The computer time is decreased from 18 hours to less than 1 second.
Piquette, Jeff Stephen
This study explored general-chemistry instructors' awareness of and ability to identify common student alternate conceptions in chemical equilibrium. Instructor strategies directed at remediation of student alternate conceptions were also investigated and compared to successful, literature-based conceptual change methods. Fifty-two general chemistry instructor volunteers from 50 U.S. colleges and universities completed an interactive web-based survey that gathered their responses to open-ended questions, a rating scale, classroom scenarios, and a demographic form. The three scenarios asked respondents to evaluate hypothetical student exam answers, justify their evaluations, and report how they would assist students to better understand ideas about which they held alternate conceptions. Survey respondents who provided responses or remediation strategies that needed further clarification were sampled (n = 6); each amplified their views in an individual, researcher-led semi-structured phone interview. All survey responses and interview transcriptions were independently analyzed by three raters who followed Patton's (1990) guidelines for qualitative data analysis. Data analysis established that all 52 instructors of chemistry were able to report and identify common student alternate conceptions in chemical equilibrium. Those instructor-reported alternate conceptions were congruent with previously identified alternate conceptions (misconceptions) found in published literature, thus providing validation support for the earlier compilations. This study revealed that chemistry instructors employ a variety of strategies in efforts to address and remediate alternate conceptions. However, those strategies rarely include all four conditions outlined by Posner, Strike, Hewson, and Gertzog (1982) needed to stimulate conceptual change in students. Instructors are thus encouraged to become familiar with successful conceptual change strategies, using such methods as appropriate in
Yildiz, Dilan; Bozkaya, Uğur
2016-01-30
The extended Koopmans' theorem (EKT) provides a straightforward way to compute ionization potentials and electron affinities from any level of theory. Although it is widely applied to ionization potentials, the EKT approach has not been applied to evaluation of the chemical reactivity. We present the first benchmarking study to investigate the performance of the EKT methods for predictions of chemical potentials (μ) (hence electronegativities), chemical hardnesses (η), and electrophilicity indices (ω). We assess the performance of the EKT approaches for post-Hartree-Fock methods, such as Møller-Plesset perturbation theory, the coupled-electron pair theory, and their orbital-optimized counterparts for the evaluation of the chemical reactivity. Especially, results of the orbital-optimized coupled-electron pair theory method (with the aug-cc-pVQZ basis set) for predictions of the chemical reactivity are very promising; the corresponding mean absolute errors are 0.16, 0.28, and 0.09 eV for μ, η, and ω, respectively. © 2015 Wiley Periodicals, Inc.
Muryanto, S.; Djatmiko Hadi, S.
2016-11-01
Adsorption laboratory experiment for undergraduate chemical engineering program is discussed. The experiment demonstrated adsorption of copper ions commonly found in wastewater using bio-sorbent, i.e. agricultural wastes. The adsorption was performed in a batch mode under various parameters: adsorption time (up to 120 min), initial pH (2 to 6), adsorbent dose (2.0 to 12.0 g L-1), adsorbent size (50 to 170 mesh), initial Cu2+ concentration (25 to 100 ppm) and temperatures (room temp to 40°C). The equilibrium and kinetic data of the experiments were calculated using the two commonly used isotherms: Langmuir and Lagergren pseudo-first-order kinetics. The maximum adsorption capacity for Cu2+ was found as 94.34 mg g-1. Thermodynamically, the adsorption process was spontaneous and endothermic. The calculated activation energy for the adsorption was observed as high as 127.94 kJ mol-1. Pedagogically, the experiment was assumed to be important in increasing student understanding of kinetic, equilibrium and thermodynamic concepts.
A non-equilibrium picture of the chemical freeze-out in hadronic thermal models
De Assis, Leonardo P G; Chiapparini, Marcelo; Hirsch, Luciana R; Delfino, Antonio
2012-01-01
Thermal models have proven to be an useful and simple tool used to make theoretical predictions and data analysis in relativistic and ultra-relativistic heavy ion collisions. A new version of these models is presented here, incorporating a non equilibrium feature to the description of the intermediate fireball state formed at the chemical freeze-out. Two different effective temperatures are attributed to the expanding fireball, regarding its baryonic and mesonic sectors. The proposal is not merely to include an additional degree of freedom to reach a better adjustment to the data, but to open a room in the model conception for considerations on the non-equilibrium scenario of the system evolution. A set of well consolidated data for particles production is used to validated the reformulated version of thermal models presented here. A rather good performance of the extended version was verified, both for the quality of particle ratio data fittings as well as for describing the asymptotic energy behavior of tem...
Energy Technology Data Exchange (ETDEWEB)
Felmy, A.R.
1990-04-01
This document is a user's manual and technical reference for the computerized chemical equilibrium model GMIN. GMIN calculates the chemical composition of systems composed of pure solid phases, solid-solution phases, gas phases, adsorbed phases, and the aqueous phase. In the aqueous phase model, the excess solution free energy is modeled by using the equations developed by PITZER and his coworkers, which are valid to high ionic strengths. The Davies equation can also be used. Activity coefficients for nonideal soild-solution phases are calculated using parameters of polynomial expansion in mole fraction of the excess free energy of mixing. The free energy of adsorbed phase species is described by the triple-layer site-binding model. The mathematical algorithm incorporated into GMIN is based upon a constrained minimization of the Gibbs free energy. This algorithm is numerically stable and reliably converges to a free energy minimum. The data base for GMIN contains all standard chemical potentials and Pitzer ion-interaction parameters necessary to model the system Na-K-Ca-Mg-H-Cl-SO{sub 4}-CO{sub 2}-B(OH){sub 4}-H{sub 2}0 at 25{degrees}C.
Johnson, R. E.
1986-01-01
Chemical reactions at high temperatures have been considered extensively because of their importance to the heating effects on re-entry of space vehicles. Data on these reactions however, are not abundant and even when found there are discrepancies in data collected by various investigators. In particular, data for recombination reactions are calculated from the dissociation reactions or vice versa through the equilibrium constant. This involves the use of the principle of detailed balancing. This principle is discussed in reference to conditions where it is valid as well as to those where it is not valid. Related topics that merit further study or for which applicable information was available are briefly mentioned in an appendix to this report.
Master equation for a chemical wave front with perturbation of local equilibrium
Dziekan, P.; Lemarchand, A.; Nowakowski, B.
2011-08-01
In order to develop a stochastic description of gaseous reaction-diffusion systems, which includes a reaction-induced departure from local equilibrium, we derive a modified expression of the master equation from analytical calculations based on the Boltzmann equation. We apply the method to a chemical wave front of Fisher-Kolmogorov-Petrovsky-Piskunov type, whose propagation speed is known to be sensitive to small perturbations. The results of the modified master equation are compared successfully with microscopic simulations of the particle dynamics using the direct simulation Monte Carlo method. The modified master equation constitutes an efficient tool at the mesoscopic scale, which incorporates the nonequilibrium effect without need of determining the particle velocity distribution function.
LIFE Chamber Chemical Equilibrium Simulations with Additive Hydrogen, Oxygen, and Nitrogen
Energy Technology Data Exchange (ETDEWEB)
DeMuth, J A; Simon, A J
2009-09-03
In order to enable continuous operation of a Laser Inertial confinement Fusion Energy (LIFE) engine, the material (fill-gas and debris) in the fusion chamber must be carefully managed. The chamber chemical equilibrium compositions for post-shot mixtures are evaluated to determine what compounds will be formed at temperatures 300-5000K. It is desired to know if carbon and or lead will deposit on the walls of the chamber, and if so: at what temperature, and what elements can be added to prevent this from happening. The simulation was conducted using the chemical equilibrium solver Cantera with a Matlab front-end. Solutions were obtained by running equilibrations at constant temperature and constant specific volume over the specified range of temperatures. It was found that if nothing is done, carbon will deposit on the walls once it cools to below 2138K, and lead below 838K. Three solutions to capture the carbon were found: adding pure oxygen, hydrogen/nitrogen combo, and adding pure nitrogen. The best of these was the addition of oxygen which would readily form CO at around 4000K. To determine the temperature at which carbon would deposit on the walls, temperature solutions to evaporation rate equations needed to be found. To determine how much carbon or any species was in the chamber at a given time, chamber flushing equations needed to be developed. Major concerns are deposition of carbon and/or oxygen on the tungsten walls forming tungsten oxides or tungsten carbide which could cause embrittlement and cause failure of the first wall. Further research is needed.
Ren, Zhuyin; Pope, Stephen B.; Vladimirsky, Alexander; Guckenheimer, John M.
2006-03-01
This work addresses the construction and use of low-dimensional invariant manifolds to simplify complex chemical kinetics. Typically, chemical kinetic systems have a wide range of time scales. As a consequence, reaction trajectories rapidly approach a hierarchy of attracting manifolds of decreasing dimension in the full composition space. In previous research, several different methods have been proposed to identify these low-dimensional attracting manifolds. Here we propose a new method based on an invariant constrained equilibrium edge (ICE) manifold. This manifold (of dimension nr) is generated by the reaction trajectories emanating from its (nr-1)-dimensional edge, on which the composition is in a constrained equilibrium state. A reasonable choice of the nr represented variables (e.g., nr "major" species) ensures that there exists a unique point on the ICE manifold corresponding to each realizable value of the represented variables. The process of identifying this point is referred to as species reconstruction. A second contribution of this work is a local method of species reconstruction, called ICE-PIC, which is based on the ICE manifold and uses preimage curves (PICs). The ICE-PIC method is local in the sense that species reconstruction can be performed without generating the whole of the manifold (or a significant portion thereof). The ICE-PIC method is the first approach that locally determines points on a low-dimensional invariant manifold, and its application to high-dimensional chemical systems is straightforward. The "inputs" to the method are the detailed kinetic mechanism and the chosen reduced representation (e.g., some major species). The ICE-PIC method is illustrated and demonstrated using an idealized H2/O system with six chemical species. It is then tested and compared to three other dimension-reduction methods for the test case of a one-dimensional premixed laminar flame of stoichiometric hydrogen/air, which is described by a detailed mechanism
Ngo, Son Tung; Hung, Huynh Minh; Nguyen, Minh Tho
2016-12-05
The fast pulling ligand (FPL) out of binding cavity using non-equilibrium molecular dynamics (MD) simulations was demonstrated to be a rapid, accurate and low CPU demand method for the determination of the relative binding affinities of a large number of HIV-1 protease (PR) inhibitors. In this approach, the ligand is pulled out of the binding cavity of the protein using external harmonic forces, and the work of pulling force corresponds to the relative binding affinity of HIV-1 PR inhibitor. The correlation coefficient between the pulling work and the experimental binding free energy of R=-0.95 shows that FPL results are in good agreement with experiment. It is thus easier to rank the binding affinities of HIV-1 PR inhibitors, that have similar binding affinities because the mean error bar of pulling work amounts to δW=7%. The nature of binding is discovered using the FPL approach. © 2016 Wiley Periodicals, Inc.
Directory of Open Access Journals (Sweden)
Hrubý Jan
2012-04-01
Full Text Available Mathematical modeling of the non-equilibrium condensing transonic steam flow in the complex 3D geometry of a steam turbine is a demanding problem both concerning the physical concepts and the required computational power. Available accurate formulations of steam properties IAPWS-95 and IAPWS-IF97 require much computation time. For this reason, the modelers often accept the unrealistic ideal-gas behavior. Here we present a computation scheme based on a piecewise, thermodynamically consistent representation of the IAPWS-95 formulation. Density and internal energy are chosen as independent variables to avoid variable transformations and iterations. On the contrary to the previous Tabular Taylor Series Expansion Method, the pressure and temperature are continuous functions of the independent variables, which is a desirable property for the solution of the differential equations of the mass, energy, and momentum conservation for both phases.
Conversion of Chemical Reaction Energy into Useful Work in the Van't Hoff Equilibrium Box
Bazhin, N. M.; Parmon, V. N.
2007-01-01
The ideal van't Hoff equilibrium box is described in detail. It shows that van't Hoff equilibrium box divided in two parts can simultaneously produce heat and useful work without violation of the first law of thermodynamics.
Institute of Scientific and Technical Information of China (English)
无
2000-01-01
An elemental composition method for computation and analysis of simultaneous chemical and phase equilibrium (CPE) of non-ideal mixtures is proposed. The concept of element is defined, the relationship between component composition and elemental composition is derived, and the concept of elemental potential and its physical meaning are further cleared from the view point of thermodynamics. The relationship between chemical potential and elemental potential is derived in the thermodynamic principles, and the computation equations for CPE problem are obtained based on elemental potential. A simple form of necessary and sufficient condition in terms of elemental composition for reactive azeotropes is derived, which takes the same functional form as the condition for azeotropes in non-reactive systems. The element in this note may be atoms, molecules or group radicals. The presented method is applicable to CPE problem of non-ideal mixtures, and the computation can be simplified by the dimension reducing method. The presented method was supplied to compute and analyze CPE problem of several examples and it is found that it is a robust and efficient method.
A new particle-like method for high-speed flows with chemical non-equilibrium
Directory of Open Access Journals (Sweden)
Fábio Rodrigues Guzzo
2010-04-01
Full Text Available The present work is concerned with the numerical simulation of hypersonic blunt body flows with chemical non-equilibrium. New theoretical and numerical formulations for coupling the chemical reaction to the fluid dynamics are presented and validated. The fluid dynamics is defined for a stationary unstructured mesh and the chemical reaction process is defined for “finite quantities” moving through the stationary mesh. The fluid dynamics is modeled by the Euler equations and the chemical reaction rates by the Arrhenius law. Ideal gases are considered. The thermodynamical data are based on JANNAF tables and Burcat’s database. The algorithm proposed by Liou, known as AUSM+, is implemented in a cell-centered based finite volume method and in an unstructured mesh context. Multidimensional limited MUSCL interpolation method is used to perform property reconstructions and to achieve second-order accuracy in space. The minmod limiter is used. The second order accuracy, five stage, Runge-Kutta time-stepping scheme is employed to perform the time march for the fluid dynamics. The numerical code VODE, which is part of the CHEMKIN-II package, is adopted to perform the time integration for the chemical reaction equations. The freestream reacting fluid is composed of H2 and air at the stoichiometric ratio. The emphasis of the present paper is on the description of the new methodology for handling the coupling of chemical and fluid mechanic processes, and its validation by comparison with the standard time-splitting procedure. The configurations considered are the hypersonic flow over a wedge, in which the oblique detonation wave is induced by an oblique shock wave, and the hypersonic flow over a blunt body. Differences between the solutions obtained with each formulation are presented and discussed, including the effects of grid refinement in each case. The primary objective of such comparisons is the validation of the proposed methodology. Moreover, for
Energy Technology Data Exchange (ETDEWEB)
Kustova, Elena V., E-mail: e.kustova@spbu.ru [Department of Mathematics and Mechanics, Saint Petersburg State University, 198504 Universitetskiy pr. 28, Saint Petersburg (Russian Federation); Kremer, Gilberto M., E-mail: kremer@fisica.ufpr.br [Departamento de Física, Universidade Federal do Paraná, Caixa Postal 19044, 81531-980 Curitiba (Brazil)
2014-12-05
Highlights: • State-to-state approach for coupled vibrational relaxation and chemical reactions. • Self-consistent model for rates of non-equilibrium reactions and energy transitions. • In viscous flows mass action law is violated. • Cross coupling between reaction rates and non-equilibrium pressure in viscous flow. • Results allow implementing the state-to-state approach for viscous flow simulations. - Abstract: Viscous gas flows with vibrational relaxation and chemical reactions in the state-to-state approach are analyzed. A modified Chapman–Enskog method is used for the determination of chemical reaction and vibrational transition rates and non-equilibrium pressure. Constitutive equations depend on the thermodynamic forces: velocity divergence and chemical reaction/transition affinity. As an application, N{sub 2} flow with vibrational relaxation across a shock wave is investigated. Two distinct processes occur behind the shock: for small values of the distance the affinity is large and vibrational relaxation is in its initial stage; for large distances the affinity is small and the chemical reaction is in its final stage. The affinity contributes more to the transition rate than the velocity divergence and the effect of these two contributions are more important for small distances from the shock front. For the non-equilibrium pressure, the term associated with the bulk viscosity increases by a small amount the hydrostatic pressure.
DEFF Research Database (Denmark)
Jahnke, Annika; Mayer, Philipp; Adolfsson-Erici, Margaretha
2011-01-01
lipids. In the present study, PDMS thin films were used for equilibrium sampling of polychlorinated biphenyls (PCBs) in intact tissue of two eels and one salmon. A classical exhaustive extraction technique to determine lipid-normalized PCB concentrations, which assigns the body burden of the chemical...... of the equilibrium sampling technique, while at the same time confirming that the fugacity capacity of these lipid-rich tissues for PCBs was dominated by the lipid fraction. Equilibrium sampling was also applied to homogenates of the same fish tissues. The PCB concentrations in the PDMS were 1.2 to 2.0 times higher......Equilibrium sampling of organic pollutants into the silicone polydimethylsiloxane (PDMS) has recently been applied in biological tissues including fish. Pollutant concentrations in PDMS can then be multiplied with lipid/PDMS distribution coefficients (DLipid,PDMS) to obtain concentrations in fish...
Energy Technology Data Exchange (ETDEWEB)
Zhang, Fan [ORNL; Yeh, Gour-Tsyh [University of Central Florida, Orlando; Parker, Jack C [ORNL; Brooks, Scott C [ORNL; Pace, Molly [ORNL; Kim, Young Jin [ORNL; Jardine, Philip M [ORNL; Watson, David B [ORNL
2007-01-01
This paper presents a reaction-based water quality transport model in subsurface flow systems. Transport of chemical species with a variety of chemical and physical processes is mathematically described by M partial differential equations (PDEs). Decomposition via Gauss-Jordan column reduction of the reaction network transforms M species reactive transport equations into two sets of equations: a set of thermodynamic equilibrium equations representing NE equilibrium reactions and a set of reactive transport equations of M-NE kinetic-variables involving no equilibrium reactions (a kinetic-variable is a linear combination of species). The elimination of equilibrium reactions from reactive transport equations allows robust and efficient numerical integration. The model solves the PDEs of kinetic-variables rather than individual chemical species, which reduces the number of reactive transport equations and simplifies the reaction terms in the equations. A variety of numerical methods are investigated for solving the coupled transport and reaction equations. Simulation comparisons with exact solutions were performed to verify numerical accuracy and assess the effectiveness of various numerical strategies to deal with different application circumstances. Two validation examples involving simulations of uranium transport in soil columns are presented to evaluate the ability of the model to simulate reactive transport with complex reaction networks involving both kinetic and equilibrium reactions.
Zhang, Fan; Yeh, Gour-Tsyh; Parker, Jack C.; Brooks, Scott C.; Pace, Molly N.; Kim, Young-Jin; Jardine, Philip M.; Watson, David B.
2007-06-01
This paper presents a reaction-based water quality transport model in subsurface flow systems. Transport of chemical species with a variety of chemical and physical processes is mathematically described by M partial differential equations (PDEs). Decomposition via Gauss-Jordan column reduction of the reaction network transforms M species reactive transport equations into two sets of equations: a set of thermodynamic equilibrium equations representing NE equilibrium reactions and a set of reactive transport equations of M- NE kinetic-variables involving no equilibrium reactions (a kinetic-variable is a linear combination of species). The elimination of equilibrium reactions from reactive transport equations allows robust and efficient numerical integration. The model solves the PDEs of kinetic-variables rather than individual chemical species, which reduces the number of reactive transport equations and simplifies the reaction terms in the equations. A variety of numerical methods are investigated for solving the coupled transport and reaction equations. Simulation comparisons with exact solutions were performed to verify numerical accuracy and assess the effectiveness of various numerical strategies to deal with different application circumstances. Two validation examples involving simulations of uranium transport in soil columns are presented to evaluate the ability of the model to simulate reactive transport with complex reaction networks involving both kinetic and equilibrium reactions.
Kustova, Elena V.; Kremer, Gilberto M.
2014-12-01
Viscous gas flows with vibrational relaxation and chemical reactions in the state-to-state approach are analyzed. A modified Chapman-Enskog method is used for the determination of chemical reaction and vibrational transition rates and non-equilibrium pressure. Constitutive equations depend on the thermodynamic forces: velocity divergence and chemical reaction/transition affinity. As an application, N2 flow with vibrational relaxation across a shock wave is investigated. Two distinct processes occur behind the shock: for small values of the distance the affinity is large and vibrational relaxation is in its initial stage; for large distances the affinity is small and the chemical reaction is in its final stage. The affinity contributes more to the transition rate than the velocity divergence and the effect of these two contributions are more important for small distances from the shock front. For the non-equilibrium pressure, the term associated with the bulk viscosity increases by a small amount the hydrostatic pressure.
Directory of Open Access Journals (Sweden)
V. Ashok
2014-01-01
Full Text Available A hybrid solution methodology has been developed to solve chemically reacting laminar hypersonic flow in chemical Non-equilibrium and thermal equilibrium, by a Cartesian mesh based hybrid solution methodology, which uses an unstructured prism layer solution near the wall and a Cartesian mesh solution away from the wall. The unstructured prism layer for near wall solution is obtained from the normal projection of wall panels of the Cartesian mesh and are stitched with the outer Cartesian mesh. The solver, developed based on this approach when compared with other chemically reacting CFD codes and limited experimental results show good comparison. This procedure has a good potential to handle near-wall resolution for chemically reacting flows with a Cartesian mesh for complex geometries as well.
Khaikin, L. S.; Tikhonov, D. S.; Grikina, O. E.; Rykov, A. N.; Stepanov, N. F.
2014-05-01
The equilibrium molecular structure of 2-methyl-1,4-naphthoquinone (vitamin K3) having C s symmetry is experimentally characterized for the first time by means of gas-phase electron diffraction using quantum-chemical calculations and data on the vibrational spectra of related compounds.
Engel, D.C.; Versteeg, G.F.; Swaaij, W.P.M. van
1997-01-01
The chemical equilibrium of hydrogen and aqueous solutions of 1:1 bicarbonate and formate salts with a common cation has been investigated in an intensively stirred batch reactor: MHCO3(aq) + H2(aq) ↔ MOOCH(aq) + H2O(l) This was accomplished for the sodium (M = Na), potassium (M = K) and ammonium (M
Nikolaychuk, Pavel Anatolyevich; Kuvaeva, Alyona Olegovna
2016-01-01
A laboratory experiment on the study of the chemical equilibrium based on the reaction between ferric and iodide ions in solution with the formation of ferrous ions, free iodine, and triiodide ions is developed. The total concentration of iodide and triiodide ions in the reaction mixture during the reaction is determined by the argentometric…
Borge, Javier
2015-01-01
G, G°, ?rG, ?rG°, ?G, and ?G° are essential quantities to master the chemical equilibrium. Although the number of publications devoted to explaining these items is extremely high, it seems that they do not produce the desired effect because some articles and textbooks are still being written with some of these quantities that appear to be…
Engel, D.C.; Versteeg, G.F.; Swaaij, W.P.M. van
1997-01-01
The chemical equilibrium of hydrogen and aqueous solutions of 1:1 bicarbonate and formate salts with a common cation has been investigated in an intensively stirred batch reactor: MHCO3(aq) + H2(aq) ↔ MOOCH(aq) + H2O(l) This was accomplished for the sodium (M = Na), potassium (M = K) and ammonium (M
Little, James L.; Cleven, Curtis D.; Brown, Stacy D.
2011-02-01
In many cases, an unknown to an investigator is actually known in the chemical literature. We refer to these types of compounds as "known unknowns." Chemical Abstracts Service (CAS) Registry is a particularly good source of these substances as it contains over 54 million entries. Accurate mass measurements can be used to query the CAS Registry by either molecular formulae or average molecular weights. Searching the database by the web-based version of SciFinder is the preferred approach when molecular formulae are available. However, if a definitive molecular formula cannot be ascertained, searching the database with STN Express by average molecular weights is a viable alternative. The results from either approach are refined by employing the number of associated references or minimal sample history as orthogonal filters. These approaches were shown to be successful in identifying "known unknowns" noted in LC-MS and even GC-MS analyses in our laboratory. In addition, they were demonstrated in the identification of a variety of compounds of interest to others.
Little, James L; Cleven, Curtis D; Brown, Stacy D
2011-02-01
In many cases, an unknown to an investigator is actually known in the chemical literature. We refer to these types of compounds as "known unknowns." Chemical Abstracts Service (CAS) Registry is a particularly good source of these substances as it contains over 54 million entries. Accurate mass measurements can be used to query the CAS Registry by either molecular formulae or average molecular weights. Searching the database by the web-based version of SciFinder is the preferred approach when molecular formulae are available. However, if a definitive molecular formula cannot be ascertained, searching the database with STN Express by average molecular weights is a viable alternative. The results from either approach are refined by employing the number of associated references or minimal sample history as orthogonal filters. These approaches were shown to be successful in identifying "known unknowns" noted in LC-MS and even GC-MS analyses in our laboratory. In addition, they were demonstrated in the identification of a variety of compounds of interest to others. © American Society for Mass Spectrometry, 2011
Energy Technology Data Exchange (ETDEWEB)
Oliveira, Luciana Renata de; Bazzani, Armando; Giampieri, Enrico; Castellani, Gastone C., E-mail: Gastone.Castellani@unibo.it [Physics and Astronomy Department, Bologna University and INFN Sezione di Bologna (Italy)
2014-08-14
We propose a non-equilibrium thermodynamical description in terms of the Chemical Master Equation (CME) to characterize the dynamics of a chemical cycle chain reaction among m different species. These systems can be closed or open for energy and molecules exchange with the environment, which determines how they relax to the stationary state. Closed systems reach an equilibrium state (characterized by the detailed balance condition (D.B.)), while open systems will reach a non-equilibrium steady state (NESS). The principal difference between D.B. and NESS is due to the presence of chemical fluxes. In the D.B. condition the fluxes are absent while for the NESS case, the chemical fluxes are necessary for the state maintaining. All the biological systems are characterized by their “far from equilibrium behavior,” hence the NESS is a good candidate for a realistic description of the dynamical and thermodynamical properties of living organisms. In this work we consider a CME written in terms of a discrete Kolmogorov forward equation, which lead us to write explicitly the non-equilibrium chemical fluxes. For systems in NESS, we show that there is a non-conservative “external vector field” whose is linearly proportional to the chemical fluxes. We also demonstrate that the modulation of these external fields does not change their stationary distributions, which ensure us to study the same system and outline the differences in the system's behavior when it switches from the D.B. regime to NESS. We were interested to see how the non-equilibrium fluxes influence the relaxation process during the reaching of the stationary distribution. By performing analytical and numerical analysis, our central result is that the presence of the non-equilibrium chemical fluxes reduces the characteristic relaxation time with respect to the D.B. condition. Within a biochemical and biological perspective, this result can be related to the “plasticity property” of biological
Effect of Chemical Composition on Enthalpy of Evaporation and Equilibrium Vapor Pressure
Dobruskin, Vladimir Kh
2010-01-01
Proceeding from the Clausius-Clapeyron equation, the relation is derived that establishes a correlation between the partial enthalpy of evaporation from binary solutions, concentrations of components, and equilibrium vapor pressures. The difference between enthalpies of evaporation of components from solutions and those from the pure liquids, D(DH), depends on the chemical nature and concentrations, X, of solutions. The effect of concentrations on D(DH) makes different appearances in ideal and non-ideal solutions, although, as a whole, D(DH) increases with the growth of concentration of the second component. A model is introduced, which considers D(DH) as the sum of energetic changes of three sequential stages: passage of molecules from the bulk liquid into the surface layer, exit of the molecules on the outer side of the interface, and the following desorption into the gas phase. In the framework of the model, the main contribution to enthalpy of evaporation comes from the processes in the surface layer. It ...
Chemical equilibrium modeling of organic acids, pH, aluminum, and iron in Swedish surface waters.
Sjöstedt, Carin S; Gustafsson, Jon Petter; Köhler, Stephan J
2010-11-15
A consistent chemical equilibrium model that calculates pH from charge balance constraints and aluminum and iron speciation in the presence of natural organic matter is presented. The model requires input data for total aluminum, iron, organic carbon, fluoride, sulfate, and charge balance ANC. The model is calibrated to pH measurements (n = 322) by adjusting the fraction of active organic matter only, which results in an error of pH prediction on average below 0.2 pH units. The small systematic discrepancy between the analytical results for the monomeric aluminum fractionation and the model results is corrected for separately for two different fractionation techniques (n = 499) and validated on a large number (n = 3419) of geographically widely spread samples all over Sweden. The resulting average error for inorganic monomeric aluminum is around 1 µM. In its present form the model is the first internally consistent modeling approach for Sweden and may now be used as a tool for environmental quality management. Soil gibbsite with a log *Ks of 8.29 at 25°C together with a pH dependent loading function that uses molar Al/C ratios describes the amount of aluminum in solution in the presence of organic matter if the pH is roughly above 6.0.
Calculation of simultaneous chemical and phase equilibrium by the methodof Lagrange multipliers
DEFF Research Database (Denmark)
Tsanas, Christos; Stenby, Erling Halfdan; Yan, Wei
2017-01-01
iteration in the inner loop and non-ideality updated in the outer loop, thus giving an overall linear convergence rate. Stability analysis is used to introduce additional phases sequentially so as to obtain the final multiphase solution. The procedure was successfully tested on vapor-liquid equilibrium (VLE......) and vapor-liquid-liquid equilibrium (VLLE) of reaction systems....
Directory of Open Access Journals (Sweden)
Christopher P. Paolini
2012-01-01
Full Text Available The ideal gas (IG model is probably the most well-known gas models in engineering thermodynamics. In this paper, we extend the IG model into an ideal gas equilibrium (IGE model mixture model by incorporating chemical equilibrium calculations as part of the state evaluation. Through a simple graphical interface, users can set the atomic composition of a gas mixture. We have integrated this model into a thermodynamic web portal TEST (http://thermofluids.sdsu.edu/ that contains Java applets for various models for properties of pure substances. In the state panel of the IGE model, the known thermodynamic properties are entered. For a given pressure and temperature, the mixture's Gibbs function is minimized subject to atomic constraints and the equilibrium composition along with thermodynamic properties of the mixture are calculated and displayed. What is unique about this approach is that equilibrium computations are performed in the background, without requiring any major change in the familiar user interface used in other state daemons. Properties calculated by this equilibrium state daemon are compared with results from other established applications such as NASA CEA and STANJAN. Also, two different algorithms, an iterative approach and a direct approach based on minimizing different thermodynamic functions in different situation, are compared.
Equilibrium sampling of hydrophobic organic chemicals in sediments: challenges and new approaches
DEFF Research Database (Denmark)
Schaefer, S.; Mayer, Philipp; Becker, B.
2015-01-01
. The coated glass jars were very convenient for routine monitoring campaigns since (1) equilibration times are minimized by the very thin coatings, (2) the equilibration is done in the laboratory and (3) equilibrium sampling is confirmed by equal analyte concentrations in various silicone coating thicknesses......) are considered to be the effective concentrations for diffusive uptake and partitioning, and they can be measured by equilibrium sampling. We have thus applied glass jars with multiple coating thicknesses for equilibrium sampling of HOCs in sediment samples from various sites in different German rivers...... without tedious time-serious measurements. However, for some sediment samples analyte concentrations decreased towards thicker silicone coating possibly caused by depletion of the sediment or equilibrium partitioning not being attained. In this study, we investigated the application of sediment depletion...
Demonstration of Chemical Equilibrium through Regeneration of Color in Blue Bottle Experiment
Directory of Open Access Journals (Sweden)
*R. Azmat
2011-03-01
Full Text Available Concept of equilibrium is very difficult to understand for under graduate students. This experiment has a good visual impact of demonstration of equilibrium and would be one way of stimulating awareness in chemistry. An alkaline solution of arabinose and methylene green in aqueous medium can be used to explain equilibrium visually through reaction of dissolved oxygen which was observed in “BLUE BOTTLE EXPERIMENT” that showed the shift of equilibrium by regeneration of color during shaking and upon standing equilibrium shift in the forward direction and color loss was observed. Shaking the solution raises the concentration of oxygen in the mixture and oxidizes the methylene green back to its blue form. When the dissolved oxygen has been consumed, the methylene green is slowly reduced back to its colorless form by the remaining arabinose and the cycle can be repeated many times by further shaking. The experiment was repeated with various concentrations of dye indicator, arabinose and sodium hydroxide concentration. It was observed that regeneration of color and colorloss is the best visual example of explanation of equilibrium.
Ahmed, Ahfaz
2015-03-01
Gasoline is the most widely used fuel for light duty automobile transportation, but its molecular complexity makes it intractable to experimentally and computationally study the fundamental combustion properties. Therefore, surrogate fuels with a simpler molecular composition that represent real fuel behavior in one or more aspects are needed to enable repeatable experimental and computational combustion investigations. This study presents a novel computational methodology for formulating surrogates for FACE (fuels for advanced combustion engines) gasolines A and C by combining regression modeling with physical and chemical kinetics simulations. The computational methodology integrates simulation tools executed across different software platforms. Initially, the palette of surrogate species and carbon types for the target fuels were determined from a detailed hydrocarbon analysis (DHA). A regression algorithm implemented in MATLAB was linked to REFPROP for simulation of distillation curves and calculation of physical properties of surrogate compositions. The MATLAB code generates a surrogate composition at each iteration, which is then used to automatically generate CHEMKIN input files that are submitted to homogeneous batch reactor simulations for prediction of research octane number (RON). The regression algorithm determines the optimal surrogate composition to match the fuel properties of FACE A and C gasoline, specifically hydrogen/carbon (H/C) ratio, density, distillation characteristics, carbon types, and RON. The optimal surrogate fuel compositions obtained using the present computational approach was compared to the real fuel properties, as well as with surrogate compositions available in the literature. Experiments were conducted within a Cooperative Fuels Research (CFR) engine operating under controlled autoignition (CAI) mode to compare the formulated surrogates against the real fuels. Carbon monoxide measurements indicated that the proposed surrogates
Guo, Dezhou; Zybin, Sergey V.; An, Qi; Goddard, William A.; Huang, Fenglei
2016-01-01
The combustion or detonation of reacting materials at high temperature and pressure can be characterized by the Chapman–Jouguet (CJ) state that describes the chemical equilibrium of the products at the end of the reaction zone of the detonation wave for sustained detonation. This provides the critical properties and product kinetics for input to macroscale continuum simulations of energetic materials. We propose the ReaxFF Reactive Dynamics to CJ point protocol (Rx2CJ) for predicting the CJ s...
Directory of Open Access Journals (Sweden)
A. V. Aliev
2015-01-01
Full Text Available The paper considers the two approach-based techniques for calculating the non-stationary intra-chamber processes in solid-propellant rocket engine (SPRE. The first approach assumes that the combustion products are a mechanical mix while the other one supposes it to be the mix, which is in chemical equilibrium. To enhance reliability of solution of the intra ballistic tasks, which assume a chemical equilibrium of combustion products, the computing algorithms to calculate a structure of the combustion products are changed. The algorithm for solving a system of the nonlinear equations of chemical equilibrium, when determining the iterative amendments, uses the orthogonal QR method instead of a method of Gauss. Besides, a possibility to apply genetic algorithms in a task about a structure of combustion products is considered.It is shown that in the tasks concerning the prediction of non-stationary intra ballistic characteristics in a solid propellant rocket engine, application of models of mechanical mix and chemically equilibrium structure of combustion products leads to qualitatively and quantitatively coinciding results. The maximum difference in parameters is 5-10%, at most. In tasks concerning the starting operation of a solid sustainer engine with high-temperature products of combustion difference in results is more essential, and can reach 20% and more.A technique to calculate the intra ballistic parameters, in which flotation of combustion products is considered in the light of a spatial statement, requires using the high-performance computer facilities. For these tasks it is offered to define structure of products of combustion and its thermo-physical characteristics, using the polynoms coefficients of which should be predefined.
Brown, Nathaniel James Swanton
While there is consensus that conceptual change is surprisingly difficult, many competing theories of conceptual change co-exist in the literature. This dissertation argues that this discord is partly the result of an inadequate account of the unwritten rules of human social interaction that underlie the field's preferred methodology---semi-structured interviewing. To better understand the contributions of interaction during explanations, I analyze eight undergraduate general chemistry students as they attempt to explain to various people, for various reasons, why phenomena involving chemical phase equilibrium occur. Using the methods of interaction analysis, I characterize the unwritten, but systematic, rules that these participants follow as they explain. The result is a description of the contributions of interaction to explaining. Each step in each explanation is a jointly performed expression of a subject-predicate relation, an interactive accomplishment I call an information performance (in-form, for short). Unlike clauses, in-forms need not have a coherent grammatical structure. Unlike speaker turns, in-forms have the clear function of expressing information. Unlike both clauses and speaker turns, in-forms are a co-construction, jointly performed by both the primary speaker and the other interlocutor. The other interlocutor strongly affects the form and content of each explanation by giving or withholding feedback at the end of each in-form, moments I call feedback-relevant places. While in-forms are the bricks out of which the explanation is constructed, they are secured by a series of inferential links I call an illative sequence. Illative sequences are forward-searching, starting with a remembered fact or observation and following a chain of inferences in the hope it leads to the target phenomenon. The participants treat an explanation as a success if the illative sequence generates an in-form that describes the phenomenon. If the illative sequence does
Birrer, Marcel; Stemmer, Christian; Adams, Nikolaus N.
2011-05-01
Investigations of hypersonic boundary-layer flows around a cubical obstacle with a height in the order of half the boundary layer thickness were carried out in this work. Special interest was laid on the influence of chemical non-equilibrium effects on the wake flow of the obstacle. Direct numerical simulations were conducted using three different gas models, a caloric perfect, an equilibrium and a chemical non-equilibrium gas model. The geometry was chosen as a wedge with a six degree half angle, according to the aborted NASA HyBoLT free flight experiment. At 0.5 m downstream of the leading edge, a surface trip was positioned. The free-stream flow was set to Mach 8.5 with air conditions taken from the 1976 standard atmosphere at an altitude of 42 km according to the predicted flight path. The simulations were done in three steps for all models. First, two-dimensional calculations of the whole configuration including the leading edge and the obstacle were conducted. These provide constant span-wise profiles for detailed, steady three-dimensional simulations around the close vicinity of the obstacle. A free-stream Mach number of about 6.3 occurs behind the shock. A cross-section in the wake of the object then delivers the steady inflow for detailed unsteady simulations of the wake. Perturbations at unstable frequencies, obtained from a bi-global secondary stability analysis, were added to these profiles. The solutions are time-Fourier transformed to investigate the unsteady downstream development of the different modes due to the interaction with the base-flow containing two counter-rotating vortices. Results will be presented that show the influence of the presence of chemical non-equilibrium on the instability in the wake of the object leading to a laminar or a turbulent wake.
Cao, Youfang; Terebus, Anna; Liang, Jie
2016-04-01
The discrete chemical master equation (dCME) provides a general framework for studying stochasticity in mesoscopic reaction networks. Since its direct solution rapidly becomes intractable due to the increasing size of the state space, truncation of the state space is necessary for solving most dCMEs. It is therefore important to assess the consequences of state space truncations so errors can be quantified and minimized. Here we describe a novel method for state space truncation. By partitioning a reaction network into multiple molecular equivalence groups (MEGs), we truncate the state space by limiting the total molecular copy numbers in each MEG. We further describe a theoretical framework for analysis of the truncation error in the steady-state probability landscape using reflecting boundaries. By aggregating the state space based on the usage of a MEG and constructing an aggregated Markov process, we show that the truncation error of a MEG can be asymptotically bounded by the probability of states on the reflecting boundary of the MEG. Furthermore, truncating states of an arbitrary MEG will not undermine the estimated error of truncating any other MEGs. We then provide an overall error estimate for networks with multiple MEGs. To rapidly determine the appropriate size of an arbitrary MEG, we also introduce an a priori method to estimate the upper bound of its truncation error. This a priori estimate can be rapidly computed from reaction rates of the network, without the need of costly trial solutions of the dCME. As examples, we show results of applying our methods to the four stochastic networks of (1) the birth and death model, (2) the single gene expression model, (3) the genetic toggle switch model, and (4) the phage lambda bistable epigenetic switch model. We demonstrate how truncation errors and steady-state probability landscapes can be computed using different sizes of the MEG(s) and how the results validate our theories. Overall, the novel state space
Does the Addition of Inert Gases at Constant Volume and Temperature Affect Chemical Equilibrium?
Paiva, Joao C. M.; Goncalves, Jorge; Fonseca, Susana
2008-01-01
In this article we examine three approaches, leading to different conclusions, for answering the question "Does the addition of inert gases at constant volume and temperature modify the state of equilibrium?" In the first approach, the answer is yes as a result of a common students' alternative conception; the second approach, valid only for ideal…
Chemical oceanography of the Arabian Sea: Part II - Equilibrium of inorganic nitrogen system
Digital Repository Service at National Institute of Oceanography (India)
Naik, S.; SenGupta, R.
The concept pE, expressed as a dimensionless quantity to study the redox potential of a system at equilibrium, is applied to study the chemistry of the system NO-_{3}-NO-_{2}NH+_{4} in the northern Arabian Sea. Values...
Equilibrium chemical reaction of supersonic hydrogen-air jets (the ALMA computer program)
Elghobashi, S.
1977-01-01
The ALMA (axi-symmetrical lateral momentum analyzer) program is concerned with the computation of two dimensional coaxial jets with large lateral pressure gradients. The jets may be free or confined, laminar or turbulent, reacting or non-reacting. Reaction chemistry is equilibrium.
Does the Addition of Inert Gases at Constant Volume and Temperature Affect Chemical Equilibrium?
Paiva, Joao C. M.; Goncalves, Jorge; Fonseca, Susana
2008-01-01
In this article we examine three approaches, leading to different conclusions, for answering the question "Does the addition of inert gases at constant volume and temperature modify the state of equilibrium?" In the first approach, the answer is yes as a result of a common students' alternative conception; the second approach, valid only for ideal…
Wöhling, Thomas; Barkle, Greg; Stenger, Roland; Moorhead, Brian; Wall, Aaron; Clague, Juliet
2014-05-01
Automated equilibrium tension plate lysimeters (AETLs) are arguably the most accurate method to measure unsaturated water and contaminant fluxes below the root zone at the scale of up to 1 m². The AETL technique utilizes a porous sintered stainless-steel plate to provide a comparatively large sampling area with a continuously controlled vacuum that is in "equilibrium" with the surrounding vadose zone matric pressure to ensure measured fluxes represent those under undisturbed conditions. This novel lysimeter technique was used at an intensive research site for investigations of contaminant pathways from the land surface to the groundwater on a sheep and beef farm under pastoral land use in the Tutaeuaua subcatchment, New Zealand. The Spydia research facility was constructed in 2005 and was fully operational between 2006 and 2011. Extending from a central access caisson, 15 separately controlled AETLs with 0.2 m² surface area were installed at five depths between 0.4 m and 5.1 m into the undisturbed volcanic vadose zone materials. The unique setup of the facility ensured minimum interference of the experimental equipment and external factors with the measurements. Over the period of more than five years, a comprehensive data set was collected at each of the 15 AETL locations which comprises of time series of soil water flux, pressure head, volumetric water contents, and soil temperature. The soil water was regularly analysed for EC, pH, dissolved carbon, various nitrogen compounds (including nitrate, ammonia, and organic N), phosphorus, bromide, chloride, sulphate, silica, and a range of other major ions, as well as for various metals. Climate data was measured directly at the site (rainfall) and a climate station at 500m distance. The shallow groundwater was sampled at three different depths directly from the Spydia caisson and at various observation wells surrounding the facility. Two tracer experiments were conducted at the site in 2009 and 2010. In the 2009
Stibany, Felix; Ewald, Franziska; Miller, Ina; Hollert, Henner; Schäffer, Andreas
2017-01-28
The main objective of the present study was to improve the reliability and practicability of aquatic toxicity testing of hydrophobic chemicals based upon the model substance bromochlorophene (BCP). Therefore, we adapted a passive dosing format to test the toxicity of BCP at different concentrations and in multiple test systems with aquatic organisms of various trophic levels. At the same time, the method allowed for the accurate determination of exposure concentrations (i.e., in the presence of exposed organisms; Ctest) and freely dissolved concentrations (i.e., without organisms present; Cfree) of BCP in all tested media. We report on the joint adaptation of three ecotoxicity tests - algal growth inhibition, Daphnia magna immobilization, and fish-embryo toxicity - to a silicone O-ring based equilibrium passive dosing format. Effect concentrations derived by passive dosing methods were compared with corresponding effect concentrations derived by standard co-solvent setups. The passive dosing format led to EC50-values in the lower μgL(-1) range for algae, daphnids, and fish embryos, whereas increased effect concentrations were measured in the co-solvent setups for algae and daphnids. This effect once more shows that passive dosing might offer advantages over standard methods like co-solvent setups when it comes to a reliable risk assessment of hydrophobic substances. The presented passive dosing setup offers a facilitated, practical, and repeatable way to test hydrophobic chemicals on their toxicity to aquatic organisms, and is an ideal basis for the detailed investigation of this important group of chemicals.
Measurement and Modelling of Phase Equilibrium of Oil - Water - Polar Chemicals
DEFF Research Database (Denmark)
Frost, Michael Grynnerup
. Thesechemicals belong to different families like alcohols, glycols, alkanolamines, surfactants andpolymers. They have various functions, e.g., methanol and MEG are used as gas hydrate inhibitors,surfactants are used to lower interfacial tension between crude oil and microemulsion and polymersin a polymer......-waterflooding process act primarily as thickeners. The main purpose of this work, focusing on the phase equilibrium of complex systems containingthermodynamic gas hydrate inhibitors, is to give a solid contribution in bridging the existing gaps inwhat experimental data is concerned. This was achieved not just...... with the measurement of newexperimental data, but through the development of new experimental equipment for the study ofmulti-phase equilibrium. In addition to measurement of well-defined systems, LLE have beenmeasured for North Sea oils with MEG and water. The work can be split up into two parts: Experimental: VLE...
Bajwa, Kanwardeep S.; Aneja, Viney P.; Pal Arya, S.
Ammonia has recently gained importance for its increasing atmospheric concentrations and its role in the formation of aerosols. The anaerobic lagoon and spray method, commonly used for waste storage and disposal in confined animal feeding operations (CAFO), is a significant source of ammonia emissions. An accurate emission model for ammonia from aqueous surfaces can help in the development of emission factors. Data collected from field measurements made at hog waste lagoons in south eastern North Carolina, using the flow through dynamic chamber technique, were used to evaluate the Coupled mass transfer and Chemical reactions model and Equilibrium model developed by Aneja et al. [2001a. Measurement and modeling of ammonia emissions at waste treatment lagoon-Atmospheric Interface. Water, Air and Soil pollution: Focus 1, 177-188]. Sensitivity analysis shows that ammonia flux increases exponentially with lagoon temperature and pH, but a linear increase was observed with an increase in total ammoniacal nitrogen (TAN). Ammonia flux also shows a nonlinear increase with increasing wind speed. Observed ammonia fluxes were generally lower in the cold season than in the warm season when lagoon temperatures are higher. About 41% of the equilibrium model predictions and 43% of the Coupled model predictions are found to be within a factor of two of the observed fluxes. Several model performance statistics were used to evaluate the performance of the two models against the observed flux data. These indicate that the simpler Equilibrium model does as well as the Coupled model. The possible effects of the "artificial" environment within the chamber, which is different from that in the ambient atmospheric conditions above the open lagoon surface, on the measured fluxes are also recognized.
Directory of Open Access Journals (Sweden)
ZDRAVKA VELKOVA
2012-01-01
Full Text Available The biosorption potential of chemically modified waste mycelium of industrial xylanase-producing strain Aspergillus awamori for Cu (II removal from aqueous solutions was evaluated. The influence of pH, contact time and initial Cu (II concentration on the removal efficiency was evaluated. Maximum biosorption capacity was reached by sodium hydroxide treated waste fungal mycelium at pH 5.0. The Langmuir adsorption equation matched very well the adsorption equilibrium data in the studied conditions. The process kinetic followed the pseudo-firs order model.
Chemical dependency in women. Meeting the challenges of accurate diagnosis and effective treatment.
1988-01-01
Women dependent on alcohol or prescribed or nonprescribed psychoactive drugs present special diagnostic challenges to physicians. Chemical dependency likewise has adverse effects on women who are nonusers through the disease of co-dependency. The natural history of chemical dependency in women includes sex-specific differences in presenting signs and symptoms. Collateral medical history may come from a variety of community sources. Diagnoses may also use sex-specific criteria, with simultaneo...
COMPUTATION METHOD OF CHEMICAL EQUILIBRIUM OF COMPLEX SYSTEM%复杂体系化学平衡组成计算方法
Institute of Scientific and Technical Information of China (English)
邓文生; 贾冬梅; 张青山; 李民丽
2004-01-01
The chaos-Monte Carlo algorithm (CMCA) was proposed for solving chemical equilibrium of complex system. By introducing random well-distributed points into the Monte Carlo algorithm, this new approach showed good convergent probability and high-speed. Equilibrium composition of some complex systems, such as methanol synthesis, ammonia oxidation, and Claus process were calculated. The results showed good agreement with Liu Xiaodi's and Xu Jinhuo's calculations. Compared with the gradient method, the genetic algorithm and the modified genetic algorithm, the CMCA is simple, general and insensitive to initial value. It is an efficient algorithm based on the theory of minimization of Gibbs free energy to solve chemical equilibrium of complex system.
Maulois, Melissa; Ribière, Maxime; Eichwald, Olivier; Yousfi, Mohammed; Azaïs, Bruno
2016-04-01
The comprehension of electromagnetic perturbations of electronic devices, due to air plasma-induced electromagnetic field, requires a thorough study on air plasma. In the aim to understand the phenomena at the origin of the formation of non-equilibrium air plasma, we simulate, using a volume average chemical kinetics model (0D model), the time evolution of a non-equilibrium air plasma generated by an energetic X-ray flash. The simulation is undertaken in synthetic air (80% N2 and 20% O2) at ambient temperature and atmospheric pressure. When the X-ray flash crosses the gas, non-relativistic Compton electrons (low energy) and a relativistic Compton electron beam (high energy) are simultaneously generated and interact with the gas. The considered chemical kinetics scheme involves 26 influent species (electrons, positive ions, negative ions, and neutral atoms and molecules in their ground or metastable excited states) reacting following 164 selected reactions. The kinetics model describing the plasma chemistry was coupled to the conservation equation of the electron mean energy, in order to calculate at each time step of the non-equilibrium plasma evolution, the coefficients of reactions involving electrons while the energy of the heavy species (positive and negative ions and neutral atoms and molecules) is assumed remaining close to ambient temperature. It has been shown that it is the relativistic Compton electron beam directly created by the X-ray flash which is mainly responsible for the non-equilibrium plasma formation. Indeed, the low energy electrons (i.e., the non-relativistic ones) directly ejected from molecules by Compton collisions contribute to less than 1% on the creation of electrons in the plasma. In our simulation conditions, a non-equilibrium plasma with a low electron mean energy close to 1 eV and a concentration of charged species close to 1013 cm-3 is formed a few nanoseconds after the peak of X-ray flash intensity. 200 ns after the flash
Phase equilibrium of North Sea oils with polar chemicals: Experiments and CPA modeling
DEFF Research Database (Denmark)
Frost, Michael Grynnerup; Kontogeorgis, Georgios M.; von Solms, Nicolas;
2016-01-01
This work consists of a combined experimental and modeling study for oil - MEG - water systems, of relevance to petroleum applications. We present new experimental liquid-liquid equilibrium data for the mutual solubility of two North Sea oils + MEG and North Sea oils + MEG + water systems...... in the temperature range 303.15-323.15 K and at atmospheric pressure. These new data are for North Sea oils which are substantially heavier and with higher aromatic/naphthenic content compared to previous studies. The new data compare favorably with previously reported measurements for other North Sea oils. The data...
Moroz, Adam
2008-05-01
In this work we revise the applicability of the optimal control and variational approach to the maximum energy dissipation (MED) principle in non-equilibrium thermodynamics. The optimal control analogies for the kinetical and potential parts of thermodynamic Lagrangian (in the form of a sum of the positively defined thermodynamic potential and positively defined dissipative function) have been considered. An interpretation of thermodynamic momenta is discussed with respect to standard optimal control applications, which employ dynamic constraints. Also included is interpretation in terms of the least action principle.
Gibelli, François; Lombez, Laurent; Guillemoles, Jean-François
2017-02-01
In order to characterize hot carrier populations in semiconductors, photoluminescence measurement is a convenient tool, enabling us to probe the carrier thermodynamical properties in a contactless way. However, the analysis of the photoluminescence spectra is based on some assumptions which will be discussed in this work. We especially emphasize the importance of the variation of the material absorptivity that should be considered to access accurate thermodynamical properties of the carriers, especially by varying the excitation power. The proposed method enables us to obtain more accurate results of thermodynamical properties by taking into account a rigorous physical description and finds direct application in investigating hot carrier solar cells, which are an adequate concept for achieving high conversion efficiencies with a relatively simple device architecture.
An accurate and self-consistent chemical abundance catalogue for the APOGEE/Kepler sample
Hawkins, Keith; Jofre, Paula; Gilmore, Gerry; Elsworth, Yvonne; Hekker, Saskia
2016-01-01
Context. The APOGEE survey has obtained high-resolution infrared spectra of more than 100,000 stars. Deriving chemical abundances patterns of these stars is paramount to piecing together the structure of the Milky Way. While the derived chemical abundances have been shown to be precise for most stars, some calibration problems have been reported, in particular for more metal- poor stars. Aims. In this paper, we aim to (1) re-determine the chemical abundances of the APOGEE+Kepler stellar sample (APOKASC) with an independent procedure, line list and line selection, and high quality surface gravity information from astroseismology, and (2) extend the abundance catalogue by including abundances that are not currently reported in the most recent APOGEE release (DR12). Methods. We fixed the Teff and log g to those determined using spectrophotometric and asteroseismic techniques, respectively. We made use of the Brussels Automatic Stellar Parameter (BACCHUS) code to derive the metallicity and broadening parameters f...
Steinberger, Craig J.
1991-01-01
The effects of compressibility, chemical reaction exothermicity, and non-equilibrium chemical modeling in a reacting plane mixing layer were investigated by means of two dimensional direct numerical simulations. The chemical reaction was irreversible and second order of the type A + B yields Products + Heat. The general governing fluid equations of a compressible reacting flow field were solved by means of high order finite difference methods. Physical effects were then determined by examining the response of the mixing layer to variation of the relevant non-dimensionalized parameters. The simulations show that increased compressibility generally results in a suppressed mixing, and consequently a reduced chemical reaction conversion rate. Reaction heat release was found to enhance mixing at the initial stages of the layer growth, but had a stabilizing effect at later times. The increased stability manifested itself in the suppression or delay of the formation of large coherent structures within the flow. Calculations were performed for a constant rate chemical kinetics model and an Arrhenius type kinetic prototype. The choice of the model was shown to have an effect on the development of the flow. The Arrhenius model caused a greater temperature increase due to reaction than the constant kinetic model. This had the same effect as increasing the exothermicity of the reaction. Localized flame quenching was also observed when the Zeldovich number was relatively large.
Thermal non-equilibrium heat transfer in a porous cavity in the presence of bio-chemical heat source
Directory of Open Access Journals (Sweden)
Nazari Mohsen
2015-01-01
Full Text Available This paper is concerned with thermal non-equilibrium natural convection in a square cavity filled with a porous medium in the presence of a biomass which is transported in the cavity. The biomass can consume a secondary moving substrate. The physics of the presented problem is related to the analysis of heat and mass transfer in a composting process that controlled by internal heat generation. The intensity of the bio-heat source generated in the cavity is equal to the rate of consumption of the substrate by the biomass. It is assumed that the porous medium is homogeneous and isotropic. A two-field model that represents the fluid and solid phase temperature fields separately is used for energy equation. A simplified Monod model is introduced along with the governing equations to describe the consumption of the substrate by the biomass. In other word, the transient biochemical heat source which is dependent on a solute concentration is considered in the energy equations. Investigation of the biomass activity and bio-chemical heat generation in the case of thermal non-equilibrium assumption has not been considered in the literature and they are open research topics. The effects of thermal non-equilibrium model on heat transfer, flow pattern and biomass transfer are investigated. The effective parameters which have a direct impact on the generated bio-chemical heat source are also presented. The influences of the non-dimensional parameters such as fluid-to-solid conductivity ratio on the temperature distribution are presented.
Automated Discovery of New Chemical Reactions and Accurate Calculation of Their Rates
2015-06-02
known species, e.g. biradicals such as methylene and O(1P), but we can always relax this restriction and include them in future studies. Since BE...Detailed Chemical Kinetic Modeling of JP-10 (exo-tetrahydrodicyclopentadiene) High Temperature Oxidation: Exploring the Role of Biradical Species in
Institute of Scientific and Technical Information of China (English)
LI Xiaoquan; DU Zeyu; YANG Xuguang
2007-01-01
For characteristics of open and far from thermodynamic equilibrium in welding chemical reaction, a new kind of quantitative method, which is used to analyze direction and extent for chemical reaction of SiO2/Fe during quasi-steady state period, is introduced with the concept of non-equilibrium stationary state. The main idea is based on thermodynamic driving forces, which result in non-zero thermodynamic fluxes and lead to chemical reaction far away from thermodynamic equilibrium. There exists certain dynamic equilibrium relationship between rates of diffusion fluxes in liquid phase of reactants or products and the rate equation of chemical reaction when welding is in quasi-steady state. As result of this, a group of non-linear equations containing concentrations of all substances at interface of slag/liquid-metal may be established. Moreover the stability of this non-equilibrium stationary state is discussed using dissipative structure theory and it is concluded theoretically that this non-equilibrium stationary state for welding chemical reaction is of stability.
Chemical Equilibrium Mixture Computations for Energetic Material Combustion in Closed Vessels
2004-12-01
are used with well-known equations of state stemming from Redlich , Kwong and Soave (RKS); Benedict, Webb, Rubin, Starling and Han (BWRSH); Becker...mixture of numerous imperfect gases and compressible liquid and solid species with phase transitions for closed-vessel applications . This code minimizes...solid species. The benefits of the computational methods in providing accurate pre- dictions for the applications mentioned previously de- pend
An accurate and self-consistent chemical abundance catalogue for the APOGEE/Kepler sample
Hawkins, K.; Masseron, T.; Jofré, P.; Gilmore, G.; Elsworth, Y.; Hekker, S.
2016-10-01
Context. The APOGEE survey has obtained high-resolution infrared spectra of more than 100 000 stars. Deriving chemical abundances patterns of these stars is paramount to piecing together the structure of the Milky Way. While the derived chemical abundances have been shown to be precise for most stars, some calibration problems have been reported, in particular for more metal-poor stars. Aims: In this paper, we aim to (1) re-determine the chemical abundances of the APOGEE+Kepler stellar sample (APOKASC) with an independent procedure, line list and line selection, and high-quality surface gravity information from asteroseismology; and (2) extend the abundance catalogue by including abundances that are not currently reported in the most recent APOGEE release (DR12). Methods: We fixed the Teff and log g to those determined using spectrophotometric and asteroseismic techniques, respectively. We made use of the Brussels Automatic Stellar Parameter (BACCHUS) code to derive the metallicity and broadening parameters for the APOKASC sample. In addition, we derived differential abundances with respect to Arcturus. Results: We have validated the BACCHUS code on APOGEE data using several well-known stars, and stars from open and globular clusters. We also provide the abundances of C, N, O, Mg, Ca, Si, Ti, S, Al, Na, Ni, Mn, Fe, K, and V for every star and line, and show the impact of line selection on the final abundances. Improvements have been made for some elements (e.g. Ti, Si, V). Additionally, we measure new abundance ratios not found in the current APOGEE release including P, Cu, Rb, and Yb, which are only upper limits at this time, as well as Co and Cr which are promising. Conclusions: In this paper, we present an independent analysis of the APOKASC sample and provide abundances of up to 21 elements. This catalogue can be used not only to study chemical abundance patterns of the Galaxy but also to train data driven spectral approaches which can improve the abundance
Boutron, P
1984-04-01
It is generally assumed that when cells are cooled at rates close to those corresponding to the maximum of survival, once supercooling has ceased, above the eutectic melting temperature the extracellular ice is in equilibrium with the residual solution. This did not seem evident to us due to the difficulty of ice crystallization in cryoprotective solutions. The maximum quantities of ice crystallized in glycerol and 1,2-propanediol solutions have been calculated from the area of the solidification and fusion peaks obtained with a Perkin-Elmer DSC-2 differential scanning calorimeter. The accuracy has been improved by several corrections: better defined baseline, thermal variation of the heat of fusion of the ice, heat of solution of the water from its melting with the residual solution. More ice crystallizes in the glycerol than in the 1,2-propanediol solutions, of which the amorphous residue contains about 40 to 55% 1,2-propanediol. The equilibrium values are unknown in the presence of 1,2-propanediol. With glycerol, in our experiments, the maximum is first lower than the equilibrium but approaches it as the concentration increases. It is not completely determined by the colligative properties of the solutes.
Directory of Open Access Journals (Sweden)
Pessôa Filho P. A.
2004-01-01
Full Text Available Mixtures containing compounds that undergo hydrogen bonding show large deviations from ideal behavior. These deviations can be accounted for through chemical theory, according to which the formation of a hydrogen bond can be treated as a chemical reaction. This chemical equilibrium needs to be taken into account when applying stability criteria and carrying out phase equilibrium calculations. In this work, we illustrate the application of the stability criteria to establish the conditions under which a liquid-phase split may occur and the subsequent calculation of liquid-liquid equilibrium using a chemical-theory-modified Flory-Huggins equation to describe the non ideality of aqueous two-phase systems composed of poly(ethylene glycol and dextran. The model was found to be able to correlate ternary liquid-liquid diagrams reasonably well by simple adjustment of the polymer-polymer binary interaction parameter.
Chemically accurate simulation of dissociative chemisorption of D2 on Pt(1 1 1)
Nour Ghassemi, Elham; Wijzenbroek, Mark; Somers, Mark F.; Kroes, Geert-Jan
2017-09-01
Using semi-empirical density functional theory and the quasi-classical trajectory (QCT) method, a specific reaction parameter (SRP) density functional is developed for the dissociation of dihydrogen on Pt(1 1 1). The validity of the QCT method was established by showing that QCT calculations on reaction of D2 with Pt(1 1 1) closely reproduce quantum dynamics results for reaction of D2 in its rovibrational ground state. With the SRP functional, QCT calculations reproduce experimental data on D2 sticking to Pt(1 1 1) at normal and off-normal incidence with chemical accuracy. The dissociation of dihydrogen on Pt(1 1 1) is non-activated, exhibiting a minimum barrier height of -8 meV.
Directory of Open Access Journals (Sweden)
Pita Rengga Wara Dyah
2016-01-01
Full Text Available Carbon was prepared from dried waste bamboo (Dendrocalamus asper using chemical activation with KOH. The carbon was prepared with the activating agent in a mass ratio of KOH and dried bamboo (3:1 at 800oC. Using impregnation technique, the bamboo-based activated carbon has developed with modified Ag nanoparticle (Ag-AC to capture formaldehyde. The Ag-AC has characteristics of moderate surface area of 685 m2/g and average pore size of 2.7 nm. The adsorption equilibriums and kinetics of formaldehyde on Ag-AC measured. The influences of initial formaldehyde on adsorption performance have measured in a batch system. The equilibrium data were evaluated by isotherm models of Langmuir, Freundlich, and Temkin. The Langmuir model well describes the adsorptive removal of formaldehyde on Ag-AC in this study. Pseudo-first-order and pseudo-second-order kinetic equations were applied to test the experimental data. The pseudo-second-order exhibited the best fit for kinetic study.
Institute of Scientific and Technical Information of China (English)
Xun ZHU
2003-01-01
The classic two-level or equivalent two-level model that includes only the statistical equilibriumof radiative and thermal processes of excitation and quenching between two vibrational energy levelsis extended by adding chemical production to the rate equations. The modifications to the non-localthermodynamic equilibrium source function and cooling rate are parameterized by φc, which characterizesthe ratio of chemical production to collisional quenching. For applications of broadband emission of O3 at9.6 μm, the non-LTE effect of chemical production on the cooling rate and limb emission is proportionalto the ratio of O to O3. For a typical [O]/[O3], the maximum enhancements of limb radiance and coolingrate are about 15%-30% and 0.03-0.05 K day-1, respectively, both occurring near the mesopause regions.This suggests that the broadband limb radiance above ～80 km is sensitive to O3 density but not sensitiveto the direct cooling rate along the line-of-sight, which makes O3 retrieval feasible but the direct coolingrate retrieval difficult by using the O3 9.6 μm band limb emission.
Students misconceptions on chemical equilibrium and their consequences to biochemistry learning
Directory of Open Access Journals (Sweden)
E. Montagna
2011-04-01
Full Text Available It is well documented that misconceptions onchemical equilibrium (CE are widespread among students in higher education. Nevertheless CE concept is critical for biochemistry topics development such as buffer solutions, enzymekinetics, allosteric enzymes, metabolic networks, among others. In the present work weperformed tests in order to diagnose howstudents use the concepts of CE acquired inother courses. We tested high school andundergraduate students from two courses intwo institutions, in four moments of their course: a. freshmen; b. after basic general chemistry courses; c. along the biochemistrycourse and d. after physical chemistry courses. The tests dealt with: 1. tasks containing current terms, keywords and concepts about CE; 2. tests that exclusively use symbolic representations of CE and 3. application of elementary concepts of CE in biochemistry. The resultsshow that among thestudents: 1. more than 95% correctly answer questions of group1; 2. more than 50% fail in questions of group 2, and; 3. morethan 50% fail in questions of the group 3. We conclude that students solve tests on CE without really understand the concepts involved; consequently studentsare unable to work CE concepts without mathematical tools or conventional formulas.Finally, the results show that students are restricted to use CE concept only in the context in which it was learned and this certainly impairs the significant learning of the forthcoming biochemical contents.
Pathak, A. D.; Nedea, S. V.; Zondag, H. A.; Rindt, C. C. M.; Smeulders, D. M. J.
2016-09-01
Chloride based salt hydrates are promising materials for seasonal heat storage. However, hydrolysis, a side reaction, deteriorates, their cycle stability. To improve the kinetics and durability, we have investigated the optimum operating conditions of a chemical mixture of CaCl2 and MgCl2 hydrates. In this study, we apply a GGA-DFT to gain insight into the various hydrates of CaMg2Cl6. We have obtained the structural properties, atomic charges and vibrational frequencies of CaMg2Cl6 hydrates. The entropic contribution and the enthalpy change are quantified from ground state energy and harmonic frequencies. Subsequently, the change in the Gibbs free energy of thermolysis was obtained under a wide range of temperature and pressure. The equilibrium product concentration of thermolysis can be used to design the seasonal heat storage system under different operating conditions.
Celen, Ipek; Buchanan, John R; Burns, Robert T; Robinson, R Bruce; Raman, D Raj
2007-04-01
Precipitation of phosphate minerals from liquid swine manure is an established means of reducing the orthophosphate (OP) concentration. This project investigated the usefulness of a chemical equilibrium model, Visual Minteq, for prescribing the amendments needed to maximize struvite precipitation from liquid swine manure and thus reduce the OP phosphorus concentration. The actual concentrations of Mg(2+), Ca(2+), K(+), OP, NH(4)(+), alkalinity and pH from a liquid swine manure system were used as inputs to the model. The model was modified to remove species with extremely low formation rates, because they would not significantly precipitate in the reaction occurring in a short retention-time process such as those envisioned for swine manure struvite-formation reactors. Using the model's output, a series of 19-L reactors were used to verify the results. Verification results demonstrated that Visual Minteq can be used to pre-determine the concentration of amendments required to maximize struvite recovery.
Xingxing, Chen; Zhihui, Wang; Yongliang, Yu
2016-11-01
Hypersonic chemical non-equilibrium gas flows around blunt nosed bodies are studied in the present paper to investigate the Reynolds analogy relation on curved surfaces. With a momentum and energy transfer model being applied through boundary layers, influences of molecular dissociations and recombinations on skin frictions and heat fluxes are separately modeled. Expressions on the ratio of Cf / Ch (skin friction coefficient to heat flux) are presented along the surface of circular cylinders under the ideal dissociation gas model. The analysis indicates that molecular dissociations increase the linear distribution of Cf / Ch, but the nonlinear Reynolds analogy relation could ultimately be obtained in flows with larger Reynolds numbers and Mach numbers, where the decrease of wall heat flux by molecular recombinations signifies. The present modeling and analyses are also verified by the DSMC calculations on nitrogen gas flows.
New insights for accurate chemically specific measurements of slow diffusing molecules
Hou, Jianbo; Madsen, Louis A.
2013-02-01
Investigating the myriad features of molecular transport in materials yields fundamental information for understanding processes such as ion conduction, chemical reactions, and phase transitions. Molecular transport especially impacts the performance of ion-containing liquids and polymeric materials when used as electrolytes and separation media, with applications encompassing battery electrolytes, reverse-osmosis membranes, mechanical transducers, and fuel cells. Nuclear magnetic resonance (NMR) provides a unique probe of molecular translations by allowing measurement of all mobile species via spectral selectivity, access to a broad range of transport coefficients, probing of any material direction, and investigation of variable lengthscales in a material, thus, tying morphology to transport. Here, we present new concepts to test for and guarantee robust diffusion measurements. We first employ a standard pulsed-field-gradient (PFG) calibration protocol using 2H2O and obtain expected results, but we observe crippling artifacts when measuring 1H-glycerol diffusion with the same experimental parameters. A mathematical analysis of 2H2O and glycerol signals in the presence of PFG transients show tight agreement with experimental observations. These analyses lead to our principal findings that (1) negligible artifacts observed with low gyromagnetic ratio (γ) nuclei may become dominant when observing high γ nuclei, and (2) reducing the sample dimension along the gradient direction predictably reduces non-ideal behaviors of NMR signals. We further provide a useful quantitative strategy for error minimization when measuring diffusing species slower than the one used for gradient calibration.
Detection of interstellar DNC - Difficulties of chemical equilibrium hypothesis for enrichment
Godfrey, P. D.; Brown, R. D.; Gunn, H. I.; Blackman, G. L.; Storey, J. W. V.
1977-01-01
The J = 1-0 transition of DNC at 76.3058 GHz has been observed in emission in NGC 2264. Comparison with previous observations of HN(C-13) indicates that deuterium is enriched in DNC similarly to the enrichment reported for DCO(+) in this source. The DNC/HNC ratio is estimated to be about 1/24. The results cannot readily be interpreted in terms of chemical equilibria relating to the formation of DNC. It is suggested that the explanation must be sought in isotope effects on rates of formation of interstellar molecules.
Vovchenko, V; Satarov, L M; Mishustin, I N; Csernai, L P; Kisel, I; Stoecker, H
2016-01-01
We study the possibility that partonic matter produced at early stage of ultrarelativistic heavy-ion collisions is out of chemical equilibrium. It is assumed that initially this matter is mostly composed of gluons, but quarks and antiquarks are produced at later times. The dynamical evolution of partonic system is described by the Bjorken-like ideal hydrodynamics with a time dependent quark fugacity. The results of this model are compared with those obtained by assuming the complete chemical equilibrium of partons already at the initial stage. It is shown that in a chemically non-equilibrium scenario the entropy gradually increases, and about 25% of the total final entropy is generated during the hydrodynamic evolution of deconfined matter. We argue that the (anti)quark suppression included in this approach may be responsible for reduced (anti)baryon to meson ratios observed in heavy-ion collisions at LHC energies.
Huff, Vearl N; Gordon, Sanford; Morrell, Virginia E
1951-01-01
A rapidly convergent successive approximation process is described that simultaneously determines both composition and temperature resulting from a chemical reaction. This method is suitable for use with any set of reactants over the complete range of mixture ratios as long as the products of reaction are ideal gases. An approximate treatment of limited amounts of liquids and solids is also included. This method is particularly suited to problems having a large number of products of reaction and to problems that require determination of such properties as specific heat or velocity of sound of a dissociating mixture. The method presented is applicable to a wide variety of problems that include (1) combustion at constant pressure or volume; and (2) isentropic expansion to an assigned pressure, temperature, or Mach number. Tables of thermodynamic functions needed with this method are included for 42 substances for convenience in numerical computations.
Energy Technology Data Exchange (ETDEWEB)
Yousefian, V.; Weinberg, M.H.; Haimes, R.
1980-02-01
The NASA CEC Code was the starting point for PACKAGE, whose function is to evaluate the composition of a multiphase combustion product mixture under the following chemical conditions: (1) total equilibrium with pure condensed species; (2) total equilibrium with ideal liquid solution; (3) partial equilibrium/partial finite rate chemistry; and (4) fully finite rate chemistry. The last three conditions were developed to treat the evolution of complex mixtures such as coal combustion products. The thermodynamic variable pairs considered are either pressure (P) and enthalpy, P and entropy, at P and temperature. Minimization of Gibbs free energy is used. This report gives detailed discussions of formulation and input/output information used in the code. Sample problems are given. The code development, description, and current programming constraints are discussed. (DLC)
Directory of Open Access Journals (Sweden)
Wen-Hsi Cheng
2016-01-01
Full Text Available The apparent Henry’s Law constant (H′, which quantifies the concentration partition of a gas-liquid equilibrium of carbon dioxide (CO2, is used to optimize the absorption of carbon dioxide in algae liquors. The values of H′ were examined under various conditions: in water at different temperatures (27 and 37°C, in alkaline buffering chemicals (sodium hydroxide (NaOH and sodium carbonate (Na2CO3, and in aquatic algae plants (Egeria densa and Anubias barteri nana. The optimal conditions for CO2 absorption can be obtained by controlling the aqueous pH values (around weak alkalinity with pH 9-10 using sodium carbonate as an alkaline buffering chemical at 27°C, yielding exact H′ values of around 16.3–21.3 atm/M, which were obtained from the mean gaseous CO2 concentration of 803 ppm and the total aqueous carbonate concentration of 4.085 mg/L. The experimental results reveal that an alkaline buffering compound, sodium carbonate, can be added to water to maintain a constant aqueous alkalinity enough for the fixation of carbon dioxide by the photosynthesis of green algae in a photobioreactor.
Bozkaya, Uğur; Sherrill, C David
2013-08-07
Orbital-optimized coupled-electron pair theory [or simply "optimized CEPA(0)," OCEPA(0), for short] and its analytic energy gradients are presented. For variational optimization of the molecular orbitals for the OCEPA(0) method, a Lagrangian-based approach is used along with an orbital direct inversion of the iterative subspace algorithm. The cost of the method is comparable to that of CCSD [O(N(6)) scaling] for energy computations. However, for analytic gradient computations the OCEPA(0) method is only half as expensive as CCSD since there is no need to solve the λ2-amplitude equation for OCEPA(0). The performance of the OCEPA(0) method is compared with that of the canonical MP2, CEPA(0), CCSD, and CCSD(T) methods, for equilibrium geometries, harmonic vibrational frequencies, and hydrogen transfer reactions between radicals. For bond lengths of both closed and open-shell molecules, the OCEPA(0) method improves upon CEPA(0) and CCSD by 25%-43% and 38%-53%, respectively, with Dunning's cc-pCVQZ basis set. Especially for the open-shell test set, the performance of OCEPA(0) is comparable with that of CCSD(T) (ΔR is 0.0003 Å on average). For harmonic vibrational frequencies of closed-shell molecules, the OCEPA(0) method again outperforms CEPA(0) and CCSD by 33%-79% and 53%-79%, respectively. For harmonic vibrational frequencies of open-shell molecules, the mean absolute error (MAE) of the OCEPA(0) method (39 cm(-1)) is fortuitously even better than that of CCSD(T) (50 cm(-1)), while the MAEs of CEPA(0) (184 cm(-1)) and CCSD (84 cm(-1)) are considerably higher. For complete basis set estimates of hydrogen transfer reaction energies, the OCEPA(0) method again exhibits a substantially better performance than CEPA(0), providing a mean absolute error of 0.7 kcal mol(-1), which is more than 6 times lower than that of CEPA(0) (4.6 kcal mol(-1)), and comparing to MP2 (7.7 kcal mol(-1)) there is a more than 10-fold reduction in errors. Whereas the MAE for the CCSD method is
基于 ISM 法分析化学平衡%An Analysis of Chemical Equilibrium Based on ISM
Institute of Scientific and Technical Information of China (English)
石凌远; 郑子山; 喻彬
2016-01-01
正确的教材分析是完成教学目标的基础。用结构解释模型（ISM法）分析化学教材，可以使教材内容更加清晰明了。用ISM法建立的教学基础目标的解释结构模型图突出教学的重点、难点，使化学教材内容系统化、结构化，对教学活动的设计有很大的帮助。本文简述ISM法的内容和流程，并运用ISM法对高中化学教材中《化学平衡》这一章节进行了分析，从中体会ISM分析法的步骤和效果。旨在为化学平衡这一节的教学设计提供参考。%The correct analysis of materials is the basis of the completion of the teaching objectives. Analytical chemistry textbook of Interpretive Structural Modeling Method (ISM method), can make teaching materials more clarity. Establish interpretative structural model about teaching basic objectives, highlighting the teaching of key objectives and difficult goal, analytical chemistry textbook process, make the contents of the system more systematic and structured, which is very helpful for teachers to organize teaching activities. This paper describes ISM method content and processes, and the use of ISM method for high school chemistry textbook in the chapter “chemical balance” analyzed, from experience Steps and effects ISM Analysis. It aims to provide reference for the design of chemical equilibrium teaching activities.
Directory of Open Access Journals (Sweden)
M. Hamdi Karaoglu
2011-04-01
Full Text Available Quercus coccifera shell (QCS, a relatively abundant and inexpensive material, is currently being investigated as an adsorbent to remove cobalt(II from water. Before the adsorption experiments, QCS was subjected to chemical treatment to provide maximum surface area. Then, the kinetics and adsorption mechanism of Co(II ions on QCS were studied using different parameters such as adsorbent dosage, initial concentration, temperature, contact time, and solution pH. The loaded metals could be desorbed effectively with dilute hydrochloric acid, nitric acid, and 0.1 M EDTA. The Langmuir and Freundlich models were used to describe the uptake of cobalt on QCS. The equilibrium adsorption data were better fitted to Langmuir adsorption isotherm model. The maximum adsorption capacity (qm of QCS for Co(II was 33 mg g-1. Various kinetic models were used to describe the adsorption process. The adsorption followed pseudo second-order kinetic model. The intraparticle diffusion was found to be the rate-limiting step in the adsorption process. The diffusion coefficients were calculated and found to be in the range of 3.11×10−6 to 168.78×10−6 cm2s-1. The negative DH* value indicated exothermic nature of the adsorption.
Furió, C.; Calatayud, M. L.; Bárcenas, S. L.; Padilla, O. M.
2000-09-01
Many of the learning difficulties in the specific domain of chemistry are found not only in the ideas already possessed by students but in the strategic and procedural knowledge that is characteristic of everyday thinking. These defects in procedural knowledge have been described as functional fixedness and functional reduction. This article assesses the procedural difficulties of students (grade 12 and first and third year of university) based on common sense reasoning in two areas of chemistry: chemical equilibrium and geometry and polarity of molecules. In the first area, the theme of external factors affecting equilibria (temperature and concentration change) was selected because the explanations given by the students could be analyzed easily. The existence of a functional fixedness where Le Chatelier's principle was almost exclusively applied by rote could be observed, with this being the cause of the incorrect responses given to the proposed items. Functional fixedness of the Lewis structure also led to an incorrect prediction of molecular geometry. When molecular geometry was correctly determined by the students, it seemed that other methodological or procedural difficulties appeared when the task was to determine molecular polarity. The students showed a tendency, in many cases, to reduce the factors affecting molecular polarity in two possible ways: (a) assuming that polarity depends only on shape (geometric functional reduction) or (b) assuming that molecular polarity depends only on the polarity of bonds (bonding functional reduction).
Guo, Dezhou; Zybin, Sergey V; An, Qi; Goddard, William A; Huang, Fenglei
2016-01-21
The combustion or detonation of reacting materials at high temperature and pressure can be characterized by the Chapman-Jouguet (CJ) state that describes the chemical equilibrium of the products at the end of the reaction zone of the detonation wave for sustained detonation. This provides the critical properties and product kinetics for input to macroscale continuum simulations of energetic materials. We propose the ReaxFF Reactive Dynamics to CJ point protocol (Rx2CJ) for predicting the CJ state parameters, providing the means to predict the performance of new materials prior to synthesis and characterization, allowing the simulation based design to be done in silico. Our Rx2CJ method is based on atomistic reactive molecular dynamics (RMD) using the QM-derived ReaxFF force field. We validate this method here by predicting the CJ point and detonation products for three typical energetic materials. We find good agreement between the predicted and experimental detonation velocities, indicating that this method can reliably predict the CJ state using modest levels of computation.
Energy Technology Data Exchange (ETDEWEB)
Silva Martinez, Susana; Alvarez Gallegos, Alberto; Quere, Alain [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1993-05-01
In this paper is described the application of a computer program to the chemical equilibrium in non-ideal conditions (aqueous solutions of multicomponent electrolytes in the ionic forces interval: 0 < 1 < 6 mol/Kg H{sub 2}O and temperatures close to 25 celsius degrees), and its importance at industrial scale. The calculation of the thermodynamic properties of the solution (activity coefficients, osmotic coefficient, and water activity) is based in one of the most modern theories of the electrolytes; the theoretical results, compared with the experimental ones have an error of 10% or better. [Espanol] En este trabajo se describe la aplicacion de un programa de computo al equilibrio quimico en condiciones no ideales (soluciones acuosas de electrolitos multicomponentes en el intervalo de fuerzas ionicas: 0 < 1 < 6 mol/Kg H{sub 2}O y temperaturas cercanas a 25 grados celsius) y su importancia a escala industrial. El calculo de las propiedades termodinamicas (coeficientes de actividad, coeficiente osmotico y actividad del agua) de la solucion, esta basado en una de las teorias mas modernas de los electrolitos; los resultados teoricos comparados con los experimentales tienen un error del 10% o mejor.
Kusaba, Akira; Li, Guanchen; von Spakovsky, Michael R; Kangawa, Yoshihiro; Kakimoto, Koichi
2017-08-15
Clearly understanding elementary growth processes that depend on surface reconstruction is essential to controlling vapor-phase epitaxy more precisely. In this study, ammonia chemical adsorption on GaN(0001) reconstructed surfaces under metalorganic vapor phase epitaxy (MOVPE) conditions (3Ga-H and Nad-H + Ga-H on a 2 × 2 unit cell) is investigated using steepest-entropy-ascent quantum thermodynamics (SEAQT). SEAQT is a thermodynamic-ensemble based, first-principles framework that can predict the behavior of non-equilibrium processes, even those far from equilibrium where the state evolution is a combination of reversible and irreversible dynamics. SEAQT is an ideal choice to handle this problem on a first-principles basis since the chemical adsorption process starts from a highly non-equilibrium state. A result of the analysis shows that the probability of adsorption on 3Ga-H is significantly higher than that on Nad-H + Ga-H. Additionally, the growth temperature dependence of these adsorption probabilities and the temperature increase due to the heat of reaction is determined. The non-equilibrium thermodynamic modeling applied can lead to better control of the MOVPE process through the selection of preferable reconstructed surfaces. The modeling also demonstrates the efficacy of DFT-SEAQT coupling for determining detailed non-equilibrium process characteristics with a much smaller computational burden than would be entailed with mechanics-based, microscopic-mesoscopic approaches.
Engel, D.C.; Versteeg, G.F.; Swaaij, van W.P.M.
1997-01-01
This was accomplished for the sodium (M = Na), potassium (M = K) and ammonium (M = NH4) systems by measuring the equilibrium composition. This reaction was allowed to proceed from both sides of the equilibrium in a suspension of Pd/C and Pd/γ-Al2O3 catalyst particles, and was carried out at 20, 40 a
Pineda, M.; Stamatakis, M.
2017-07-01
Modeling the kinetics of surface catalyzed reactions is essential for the design of reactors and chemical processes. The majority of microkinetic models employ mean-field approximations, which lead to an approximate description of catalytic kinetics by assuming spatially uncorrelated adsorbates. On the other hand, kinetic Monte Carlo (KMC) methods provide a discrete-space continuous-time stochastic formulation that enables an accurate treatment of spatial correlations in the adlayer, but at a significant computation cost. In this work, we use the so-called cluster mean-field approach to develop higher order approximations that systematically increase the accuracy of kinetic models by treating spatial correlations at a progressively higher level of detail. We further demonstrate our approach on a reduced model for NO oxidation incorporating first nearest-neighbor lateral interactions and construct a sequence of approximations of increasingly higher accuracy, which we compare with KMC and mean-field. The latter is found to perform rather poorly, overestimating the turnover frequency by several orders of magnitude for this system. On the other hand, our approximations, while more computationally intense than the traditional mean-field treatment, still achieve tremendous computational savings compared to KMC simulations, thereby opening the way for employing them in multiscale modeling frameworks.
Energy Technology Data Exchange (ETDEWEB)
McCoskey, Jacob K. [Washington River Protection Solutions LLC, Richland, WA (United States); Cooke, Gary A. [Washington River Protection Solutions LLC, Richland, WA (United States); Herting, Daniel L. [Washington River Protection Solutions LLC, Richland, WA (United States)
2015-09-23
The purposes of the study described in this document follow; Determine or estimate the thermodynamic equilibrium of gibbsite in contact with two real tank waste supernatant liquids through both dissolution of gibbsite (bottom-up approach) and precipitation of aluminum-bearing solids (top-down approach); determine or estimate the thermodynamic equilibrium of a mixture of gibbsite and real tank waste saltcake in contact with real tank waste supernatant liquid through both dissolution of gibbsite and precipitation of aluminum-bearing solids; and characterize the solids present after equilibrium and precipitation of aluminum-bearing solids.
Brignole, Esteban Alberto
2013-01-01
Traditionally, the teaching of phase equilibria emphasizes the relationships between the thermodynamic variables of each phase in equilibrium rather than its engineering applications. This book changes the focus from the use of thermodynamics relationships to compute phase equilibria to the design and control of the phase conditions that a process needs. Phase Equilibrium Engineering presents a systematic study and application of phase equilibrium tools to the development of chemical processes. The thermodynamic modeling of mixtures for process development, synthesis, simulation, design and
F. Wania; Lei, Y. D.; Wang, C.; Abbatt, J. P. D.; Goss, K.-U.
2015-01-01
Many atmospheric and chemical variables influence the partitioning equilibrium between gas phase and condensed phases of compounds implicated in the formation of secondary organic aerosol (SOA). The large number of factors and their interaction makes it often difficult to assess their relative importance and concerted impact. Here we introduce a two-dimensional space which maps regions of dominant atmospheric phase distribution within a coordinate system defined by equilibri...
F. Wania; Lei, Y. D.; Wang, C.; Abbatt, J. P. D.; K.-U. Goss
2014-01-01
Many atmospheric and chemical variables influence the partitioning equilibrium between gas phase and condensed phases of compounds implicated in the formation of secondary organic aerosol (SOA). The large number of factors and their interaction makes it often difficult to assess their relative importance and concerted impact. Here we introduce a two-dimensional space, which maps regions of dominant atmospheric phase distribution within a coordinate system de...
Musallam, Ramsey
Chemistry is a complex knowledge domain. Specifically, research notes that Chemical Equilibrium presents greater cognitive challenges than other topics in chemistry. Cognitive Load Theory describes the impact a subject, and the learning environment, have on working memory. Intrinsic load is the facet of Cognitive Load Theory that explains the complexity innate to complex subjects. The purpose of this study was to build on the limited research into intrinsic cognitive load, by examining the effects of using multimedia screencasts as a pre-training technique to manage the intrinsic cognitive load of chemical equilibrium instruction for advanced high school chemistry students. A convenience sample of 62 fourth-year high school students enrolled in an advanced chemistry course from a co-ed high school in urban San Francisco were given a chemical equilibrium concept pre-test. Upon conclusion of the pre-test, students were randomly assigned to two groups: pre-training and no pre-training. The pre-training group received a 10 minute and 52 second pre-training screencast that provided definitions, concepts and an overview of chemical equilibrium. After pre-training both group received the same 50-minute instructional lecture. After instruction, all students were given a chemical equilibrium concept post-test. Independent sample t-tests were conducted to examine differences in performance and intrinsic load. No significant differences in performance or intrinsic load, as measured by ratings of mental effort, were observed on the pre-test. Significant differences in performance, t(60)=3.70, p=.0005, and intrinsic load, t(60)=5.34, p=.0001, were observed on the post-test. A significant correlation between total performance scores and total mental effort ratings was also observed, r(60)=-0.44, p=.0003. Because no significant differences in prior knowledge were observed, it can be concluded that pre-training was successful at reducing intrinsic load. Moreover, a significant
Directory of Open Access Journals (Sweden)
R.S.A.P. Oliveira
2014-08-01
Full Text Available INTRODUCTION. Chemical equilibrium is recognized as a topic of several misconceptions. Its origins must be tracked from previous scholarship. Its impact on biochemistry learning is not fully described. A possible bulk of data is the FUVEST exam. OBJECTIVES: Identify students’ errors profile on chemical equilibrium tasks using public data from FUVEST exam. MATERIAL AND METHODS: Data analysis from FUVEST were: i Private and Public school distribution in Elementary and Middle School, and High School candidates of Pharmacy-Biochemistry course and total USP careers until the last call for enrollment (2004-2013; ii Average performance in 1st and 2nd parts of FUVEST exam of Pharmacy-Biochemistry, Chemistry, Engineering, Biological Sciences, Languages and Medicine courses and total enrolled candidates until 1st call for enrollment (2008- 2013; iii Performance of candidates of Pharmacy-Biochemistry, Chemistry, Engineering, Biological Sciences, Languages and Medicine courses and total USP careers in chemical equilibrium issues from 1st part of FUVEST (2011-2013. RESULTS AND DISCUSSION: i 66.2% of candidates came from private Elementary-Middle School courses and 71.8%, came from High School courses; ii Average grade over the period for 1st and 2nd FUVEST parts are respectively (in 100 points: Pharmacy-Biochemistry 66.7 and 61.2, Chemistry 65.9 and 58.9, Engineering 75.9 and 71.9, Biological Sciences 65.6 and 54.6, Languages 49.9 and 43.3, Medicine 83.5 and 79.5, total enrolled candidates 51,5 and 48.9; iii Four chemical equilibrium issues were found during 2011-2013 and the analysis of multiplechoice percentage distribution over the courses showed that there was a similar performance of students among them, except for Engineering and Medicine with higher grades, but the same proportional distribution among choices. CONCLUSION: Approved students came majorly from private schools. There was a different average performance among courses and similar on
Toxicogenomic analysis of five environmental chemicals was performed to investigate the ability of genomics to predict toxicity, categorize chemicals, and elucidate mechanisms of toxicity. Three triazole antifungals (myclobutanil, propiconazole, and triadimefon) and two perfluori...
Sudheer, A. K.; Rengarajan, R.
2015-05-01
Inorganic ionic constituents (Na+, NH4+, K+, Mg2+, Ca2+, Cl-, NO3- and SO42-) of PM2.5 and associated trace gases (NH3, HNO3 and HCl) were measured simultaneously by Ambient Ion Monitor - Ion Chromatograph (AIM-IC) system with a time resolution of one hour at an urban location in semi-arid region of western India during summer and winter. The average NH3, HNO3 and HCl concentrations were 11.6 ± 5.0, 2.9 ± 0.8 and 0.15 μg m-3, respectively, during winter. During summer, NH3 and HNO3 concentrations were of similar magnitude, whereas HCl concentration was less than ∼0.03 μg m-3. NH3 concentration exhibited a distinct diurnal variation during both seasons. However, HNO3 did not show a specific diurnal trend during the observation period in both seasons. The data obtained were used to study gas-aerosol equilibrium characteristics using a thermodynamic equilibrium model, ISORROPIA II. The results suggest that NH3 exists in equilibrium between measured fine-mode particle and gas phase with a systematic bias of ∼14%, whereas HCl and HNO3 deviate significantly from the modelled data. These observations have implications on thermodynamic equilibrium assumptions used for estimating various aerosol parameters such as liquid water content, pH, etc., thus causing significant bias in chemical transport model results over the study region.
Puzzarini, Cristina; Biczysko, Malgorzata; Barone, Vincenzo; Largo, Laura; Peña, Isabel; Cabezas, Carlos; Alonso, José L.
2014-06-01
Accurate structures of aminoacids in the gas phase have been obtained by joint microwave and quantum-chemical investigations. However, the structure and conformational behavior of α-aminoacids once incorporated into peptide chains are completely different and have not yet been characterized with the same accuracy. To fill this gap, we present here an accurate characterization of the simplest dipeptide analogue (N-acetylglycinamide) involving peptidic bonds. State-of-the-art quantum-chemical computations are complemented by a comprehensive study of the rotational spectrum using a combination of Fourier transform microwave spectroscopy with laser ablation. The coexistence of the C_7 and C_5 conformers has been proved and energetically as well as spectroscopically characterized. This joint theoretical-experimental investigation demonstrated the feasibility of obtaining accurate structures for flexible small biomolecules, thus paving the route to the elucidation of the inherent behavior of peptides.
McBride, Bonnie J.; Gordon, Sanford
1996-01-01
This users manual is the second part of a two-part report describing the NASA Lewis CEA (Chemical Equilibrium with Applications) program. The program obtains chemical equilibrium compositions of complex mixtures with applications to several types of problems. The topics presented in this manual are: (1) details for preparing input data sets; (2) a description of output tables for various types of problems; (3) the overall modular organization of the program with information on how to make modifications; (4) a description of the function of each subroutine; (5) error messages and their significance; and (6) a number of examples that illustrate various types of problems handled by CEA and that cover many of the options available in both input and output. Seven appendixes give information on the thermodynamic and thermal transport data used in CEA; some information on common variables used in or generated by the equilibrium module; and output tables for 14 example problems. The CEA program was written in ANSI standard FORTRAN 77. CEA should work on any system with sufficient storage. There are about 6300 lines in the source code, which uses about 225 kilobytes of memory. The compiled program takes about 975 kilobytes.
Energy Technology Data Exchange (ETDEWEB)
Patino, P.; Castro, A. [Escuela de Quimica, Facultad de Ciencias, Universidad Central de Venezuela, P.O. Box 47102, Caracas 1041A (Venezuela)]. e-mail: ppatino@strix.ciens.ucv.ve
2003-07-01
By means of optical emission spectroscopy the population of O({sup 3}P) in a non-equilibrium, high voltage, oxygen plasma, and O({sup 3}P), H and OH in another of steam in radio frequency, have been followed. Reactions of both plasmas with liquid hydrocarbons have produced oxidation and/or hydrogenation, depending on the conditions of each one. (Author)
Reniers, Genserik; Dullaert, Wout; Karel, Soudan
2009-08-15
Every company situated within a chemical cluster faces domino effect risks, whose magnitude depends on every company's own risk management strategies and on those of all others. Preventing domino effects is therefore very important to avoid catastrophes in the chemical process industry. Given that chemical companies are interlinked by domino effect accident links, there is some likelihood that even if certain companies fully invest in domino effects prevention measures, they can nonetheless experience an external domino effect caused by an accident which occurred in another chemical enterprise of the cluster. In this article a game-theoretic approach to interpret and model behaviour of chemical plants within chemical clusters while negotiating and deciding on domino effects prevention investments is employed.
Directory of Open Access Journals (Sweden)
Monique Florenzano
2008-09-01
Full Text Available General equilibrium is a central concept of economic theory. Unlike partial equilibrium analysis which study the equilibrium of a particular market under the clause “ceteris paribus” that revenues and prices on the other markets stay approximately unaffected, the ambition of a general equilibrium model is to analyze the simultaneous equilibrium in all markets of a competitive economy. Definition of the abstract model, some of its basic results and insights are presented. The important issues of uniqueness and local uniqueness of equilibrium are sketched; they are the condition for a predictive power of the theory and its ability to allow for statics comparisons. Finally, we review the main extensions of the general equilibrium model. Besides the natural extensions to infinitely many commodities and to a continuum of agents, some examples show how economic theory can accommodate the main ideas in order to study some contexts which were not thought of by the initial model
Sun, Hao; Tanaka, Yasunori; Tomita, Kentaro; Wu, Yi; Rong, Mingzhe; Uesugi, Yoshihiko; Ishijima, Tatsuo
2016-02-01
A non-chemically equilibrium (non-CE) model was established to investigate the N2 arc plasma in the decaying phase during the arc interruption, and was validated by comparison with the experimental results based on laser Thomson scattering. Unlike the conventional model assuming the local thermodynamic equilibrium (LTE), in this non-CE model, the magneto-hydro-dynamics (MHD) method was coupled with the reaction kinetics to obtain the time-dependent species compositions and properties. The current calculation took into account five species in hot gas and 22 chemical reactions in total. The time-dependent species compositions of hot N2 were derived from the mass conservation equation for each species, considering the effect of the convection, diffusion and the chemical reaction. The influence of the non-CE compositions on the arc decaying behavior was realized by updating the thermodynamic and transport properties at each iterative step. The results indicate that the non-CE model can result in the departure of the arc decaying behavior from the LTE model, because it alters the time evolution of the species composition and consequently changes the thermodynamic and transport properties. At the edge of the arc, the time evolutions of the species are dominant by both the diffusion and the chemical reactions while at the center of the arc they are mainly influenced by the chemical reactions. Generally, the non-CE effect can lead to the delay of all the particles’ variations, particularly the electron decay, so that the arc interruption performance will be reduced compared with that in the LTE model.
DEFF Research Database (Denmark)
Schmidt, Stine Nørgaard; Holmstrup, Martin; Smith, Kilian E. C.
2013-01-01
treatments, containing the polycyclic aromatic hydrocarbons (PAHs) naphthalene, phenanthrene, and pyrene. Springtail lethality was then linked to sum chemical activities (∑a), sum equilibrium lipid concentrations (∑Clipid eq.), and sum toxic units (∑TU). In each case, the effects of all 12 mixture treatments...... could be fitted to one sigmoidal exposure-response relationship. The effective lethal chemical activity (La50) of 0.027 was well within the expected range for baseline toxicity of 0.01-0.1. Linking the effects to the lipid-based exposure parameter yielded an effective lethal concentration (LClipid eq....... 50) of 133 mmol kg-1 lipid in good correspondence with the lethal membrane burden for baseline toxicity (40-160 mmol kg-1 lipid). Finally, the effective lethal toxic unit (LTU50) of 1.20 was rather close to the expected value of 1. Altogether, passive dosing provided tightly controlled mixture...
Brust, H.; Asten, A. van; Koeberg, M.; Dalmolen, J.; Heijden, A.E.D.M. van der; Schoenmakers, P.
2014-01-01
After an explosion of pentaerythritol tetranitrate (PETN), its degradation products pentaerythritol trinitrate (PETriN), dinitrate (PEDiN) and mononitrate (PEMN) were detected using liquid chromatography-atmospheric-pressure chemical-ionization-mass spectrometry (LC-APCI-MS). Discrimination between
Equilibrium statistical mechanics
Mayer, J E
1968-01-01
The International Encyclopedia of Physical Chemistry and Chemical Physics, Volume 1: Equilibrium Statistical Mechanics covers the fundamental principles and the development of theoretical aspects of equilibrium statistical mechanics. Statistical mechanical is the study of the connection between the macroscopic behavior of bulk matter and the microscopic properties of its constituent atoms and molecules. This book contains eight chapters, and begins with a presentation of the master equation used for the calculation of the fundamental thermodynamic functions. The succeeding chapters highlight t
平衡电负性与烷烃核磁共振碳谱位移%EQUILIBRIUM ELECTRONEGATIVITY AND 13C NMR CHEMICAL SHIFTS OF ALKANES
Institute of Scientific and Technical Information of China (English)
聂长明; 文松年
2001-01-01
In this paper, the atomic equilibrium electronegativity in a molecule has been defined and the model of 13C NMR chemical shifts of alkanes has been studied with the atomic equilibrium electronegativity and the structural information parameters NiH(i=0,α,β,γ) and NjC(j=α,β,γ). The results indicate that the 13C NMR chemical shifts of alkanes can be described as follows: CS=-1736.776+755.118AEE+5.2539N0H+1.8837NβH-0.2066NγH By the use of the formula the chemical shifts of 99 carbon atoms are predicated, and the standard error is only 0.9861ppm. The average absolute error is 0.78ppm, The calculated values conform very much to the observed values.%定义了烷烃分子中碳原子的平衡电负性(AEE)，用平衡电负性和NiH(i=0,α,β,γ)和NjC(j=α,β,γ)结构信息参数研究了烷烃的13C NMR化学位移模型.结果表明，烷烃13C NMR化学位移(CS)可用下式来定量描述： CS=-1736.776+755.118AEE+5.2539N0H+1.8837NβH-0.2066NγH 用上式估算了99个碳原子的化学位移，标准差为0.9861ppm，平均绝对误差0.78ppm，预测值与实验值十分吻合.
An upwind, kinetic flux-vector splitting method for flows in chemical and thermal non-equilibrium
Eppard, W. M.; Grossman, B.
1993-01-01
We have developed new upwind kinetic difference schemes for flows with non-equilibrium thermodynamics and chemistry. These schemes are derived from the Boltzmann equation with the resulting Euler schemes developed as moments of the discretized Boltzmann scheme with a locally Maxwellian velocity distribution. Splitting the velocity distribution at the Boltzmann level is seen to result in a flux-split Euler scheme and is called Kinetic Flux Vector Splitting (KFVS). Extensions to flows with finite-rate chemistry and vibrational relaxation is accomplished utilizing nonequilibrium kinetic theory. Computational examples are presented comparing KFVS with the schemes of Van Leer and Roe for a quasi-one-dimensional flow through a supersonic diffuser, inviscid flow through two-dimensional inlet, and viscous flow over a cone at zero angle-of-attack. Calculations are also shown for the transonic flow over a bump in a channel and the transonic flow over an NACA 0012 airfoil. The results show that even though the KFVS scheme is a Riemann solver at the kinetic level, its behavior at the Euler level is more similar to the existing flux-vector splitting algorithms than to the flux-difference splitting scheme of Roe.
An upwind, kinetic flux-vector splitting method for flows in chemical and thermal non-equilibrium
Eppard, W. M.; Grossman, B.
1993-01-01
We have developed new upwind kinetic difference schemes for flows with non-equilibrium thermodynamics and chemistry. These schemes are derived from the Boltzmann equation with the resulting Euler schemes developed as moments of the discretized Boltzmann scheme with a locally Maxwellian velocity distribution. Splitting the velocity distribution at the Boltzmann level is seen to result in a flux-split Euler scheme and is called Kinetic Flux Vector Splitting (KFVS). Extensions to flows with finite-rate chemistry and vibrational relaxation is accomplished utilizing nonequilibrium kinetic theory. Computational examples are presented comparing KFVS with the schemes of Van Leer and Roe for a quasi-one-dimensional flow through a supersonic diffuser, inviscid flow through two-dimensional inlet, and viscous flow over a cone at zero angle-of-attack. Calculations are also shown for the transonic flow over a bump in a channel and the transonic flow over an NACA 0012 airfoil. The results show that even though the KFVS scheme is a Riemann solver at the kinetic level, its behavior at the Euler level is more similar to the existing flux-vector splitting algorithms than to the flux-difference splitting scheme of Roe.
Fischer, Rudolf Fritz; Baltes, Christof; Weiss, Kilian; Pazhenkottil, Aju; Rudin, Markus; Boesiger, Peter; Kozerke, Sebastian
2011-07-01
In this work Linear Response Equilibrium (LRE) and Echo-planar spectroscopic imaging (EPSI) are compared in terms of sensitivity per unit time and power deposition. In addition an extended dual repetition time scheme to generate broad stopbands for improved inherent water suppression in LRE is presented. The feasibility of LRE and EPSI for assessing cholesterol esters in human carotid plaques with high spatial resolution of 1.95 × 1.15 × 1.15 mm 3 on a clinical 3T MR system is demonstrated. In simulations and phantom experiments it is shown that LRE has comparable but lower sensitivity per unit time relative to EPSI despite stronger signal generated. This relates to the lower sampling efficiency in LRE relative to EPSI as a result of limited gradient performance on clinical MR systems. At the same time, power deposition of LRE is significantly reduced compared to EPSI making it an interesting niche application for in vivo high field spectroscopic imaging of metabolites within a limited bandwidth.
Pearce, K L; Ferguson, M; Gardner, G; Smith, N; Greef, J; Pethick, D W
2009-01-01
Fifty merino wethers (liveweight range from 44 to 81kg, average of 58.6kg) were lot fed for 42d and scanned through a dual X-ray absorptiometry (DXA) as both a live animal and whole carcass (carcass weight range from 15 to 32kg, average of 22.9kg) producing measures of total tissue, lean, fat and bone content. The carcasses were subsequently boned out into saleable cuts and the weights and yield of boned out muscle, fat and bone recorded. The relationship between chemical lean (protein+water) was highly correlated with DXA carcass lean (r(2)=0.90, RSD=0.674kg) and moderately with DXA live lean (r(2)=0.72, RSD=1.05kg). The relationship between the chemical fat was moderately correlated with DXA carcass fat (r(2)=0.86, RSD=0.42kg) and DXA live fat (r(2)=0.70, RSD=0.71kg). DXA carcass and live animal bone was not well correlated with chemical ash (both r(2)=0.38, RSD=0.3). DXA carcass lean was moderately well predicted from DXA live lean with the inclusion of bodyweight in the regression (r(2)=0.82, RSD=0.87kg). DXA carcass fat was well predicted from DXA live fat (r(2)=0.86, RSD=0.54kg). DXA carcass lean and DXA carcass fat with the inclusion of carcass weight in the regression significantly predicted boned out muscle (r(2)=0.97, RSD=0.32kg) and fat weight, respectively (r(2)=0.92, RSD=0.34kg). The use of DXA live lean and DXA live fat with the inclusion of bodyweight to predict boned out muscle (r(2)=0.83, RSD=0.75kg) and fat (r(2)=0.86, RSD=0.46kg) weight, respectively, was moderate. The use of DXA carcass and live lean and fat to predict boned out muscle and fat yield was not correlated as weight. The future for the DXA will exist in the determination of body composition in live animals and carcasses in research experiments but there is potential for the DXA to be used as an online carcass grading system.
Sagiyama, Koki; Garikipati, Krishna
2015-01-01
We consider solid state phase transformations that are caused by free energy densities with domains of non-convexity in strain-composition space. We refer to the non-convex domains as mechano-chemical spinodals. The non-convexity with respect to composition causes segregation into phases with different crystal structures. If, for one of these crystal structures, the free energy density is also non-convex with respect to strain, there is potential for the corresponding phase to further separate into multiple variants. For mathematical well-posedness the free energy description must be enhanced by interface terms that penalize gradients with respect to strain and composition. A system of PDEs results that couples the classical Cahn-Hilliard equation with those of gradient elasticity. Since the materials systems of interest display finite strains, the appropriate description is Toupin's theory of gradient elasticity at finite strains. The presence of strain and composition gradients in the free energy density le...
Beretta, Gian Paolo
2015-01-01
Steepest-Entropy-Ascent Quantum Thermodynamics (SEAQT) provides a general framework for the description of non-equilibrium phenomena at any level, particularly the atomistic one. This theory and its dynamical postulate are used here to develop a general mathematical framework, which at an atomistic level, in particular, can be used to predict the non-equilibrium evolution in state of a closed, chemically reactive mixture such as the one examined here, i.e., a mixture of hydrogen (H2) and flourine (F) contained in an isolated tank of fixed volume. The general framework provided, however, is written for a reactive system subject to multiple reaction mechanisms. To predict this evolution in state, both the energy and particle number eigenvalue problems for a dilute gas are set up and solved analytically. Wall and non-ideal-gas behavior effects are neglected, although the extension to dense gases is straightforward but left for a future paper. The system-level energy and particle number eigenvalues and eigenstate...
Jiménez-Osés, Gonzalo; García, José I; Corzana, Francisco; Elguero, José
2011-05-20
A new protocol combining classical MD simulations and DFT calculations is presented to accurately estimate the (1)H NMR chemical shifts of highly mobile guest-host systems and their thermal dependence. This strategy has been successfully applied for the hydrogen molecule trapped into C(60) fullerene, an unresolved and challenging prototypical case for which experimental values have never been reproduced. The dependence of the final values on the theoretical method and their implications to avoid over interpretation of the obtained results are carefully described.
Shargatov, V. A.
2016-11-01
We examined the approximate method to calculate composition and thermodynamic parameters of hydrocarbons-air nonequilibrium explosion products based on the assumption of the existence of a partial chemical equilibrium. With excellent accuracy of calculating thermodynamic properties and species mass fraction the respective stiff system of detailed kinetics differential equations can be replaced by the one differential equation or the two differential equations and a system of algebraic equations. This method is always consistent with the detailed kinetic mechanism. The constituent equations of the method were derived and the respective computer code written. We examine the applicability of the method by solving the test problem. The proposed method simulation results are in excellent agreement with the detailed kinetics model results corresponding the stiff ordinary differential equation solver including NO time histories.
Ramaswamy, Rajesh; Sbalzarini, Ivo F; González-Segredo, Nélido
2011-01-28
Stochastic effects from correlated noise non-trivially modulate the kinetics of non-linear chemical reaction networks. This is especially important in systems where reactions are confined to small volumes and reactants are delivered in bursts. We characterise how the two noise sources confinement and burst modulate the relaxation kinetics of a non-linear reaction network around a non-equilibrium steady state. We find that the lifetimes of species change with burst input and confinement. Confinement increases the lifetimes of all species that are involved in any non-linear reaction as a reactant. Burst monotonically increases or decreases lifetimes. Competition between burst-induced and confinement-induced modulation may hence lead to a non-monotonic modulation. We quantify lifetime as the integral of the time autocorrelation function (ACF) of concentration fluctuations around a non-equilibrium steady state of the reaction network. Furthermore, we look at the first and second derivatives of the ACF, each of which is affected in opposite ways by burst and confinement. This allows discriminating between these two noise sources. We analytically derive the ACF from the linear Fokker-Planck approximation of the chemical master equation in order to establish a baseline for the burst-induced modulation at low confinement. Effects of higher confinement are then studied using a partial-propensity stochastic simulation algorithm. The results presented here may help understand the mechanisms that deviate stochastic kinetics from its deterministic counterpart. In addition, they may be instrumental when using fluorescence-lifetime imaging microscopy (FLIM) or fluorescence-correlation spectroscopy (FCS) to measure confinement and burst in systems with known reaction rates, or, alternatively, to correct for the effects of confinement and burst when experimentally measuring reaction rates.
Giirsoy, Gamze; Terebus, Anna; Cao, Youfang; Liang, Jie; Gursoy, Gamze; Terebus, Anna; Youfang Cao; Jie Liang; Gursoy, Gamze; Cao, Youfang; Terebus, Anna; Liang, Jie
2016-08-01
Stochasticity plays important roles in regulation of biochemical reaction networks when the copy numbers of molecular species are small. Studies based on Stochastic Simulation Algorithm (SSA) has shown that a basic reaction system can display stochastic focusing (SF) by increasing the sensitivity of the network as a result of the signal noise. Although SSA has been widely used to study stochastic networks, it is ineffective in examining rare events and this becomes a significant issue when the tails of probability distributions are relevant as is the case of SF. Here we use the ACME method to solve the exact solution of the discrete Chemical Master Equations and to study a network where SF was reported. We showed that the level of SF depends on the degree of the fluctuations of signal molecule. We discovered that signaling noise under certain conditions in the same reaction network can lead to a decrease in the system sensitivities, thus the network can experience stochastic defocusing. These results highlight the fundamental role of stochasticity in biological reaction networks and the need for exact computation of probability landscape of the molecules in the system.
Grossman, B.; Cinella, P.
1988-01-01
A finite-volume method for the numerical computation of flows with nonequilibrium thermodynamics and chemistry is presented. A thermodynamic model is described which simplifies the coupling between the chemistry and thermodynamics and also results in the retention of the homogeneity property of the Euler equations (including all the species continuity and vibrational energy conservation equations). Flux-splitting procedures are developed for the fully coupled equations involving fluid dynamics, chemical production and thermodynamic relaxation processes. New forms of flux-vector split and flux-difference split algorithms are embodied in a fully coupled, implicit, large-block structure, including all the species conservation and energy production equations. Several numerical examples are presented, including high-temperature shock tube and nozzle flows. The methodology is compared to other existing techniques, including spectral and central-differenced procedures, and favorable comparisons are shown regarding accuracy, shock-capturing and convergence rates.
Grossman, B.; Cinella, P.
1988-01-01
A finite-volume method for the numerical computation of flows with nonequilibrium thermodynamics and chemistry is presented. A thermodynamic model is described which simplifies the coupling between the chemistry and thermodynamics and also results in the retention of the homogeneity property of the Euler equations (including all the species continuity and vibrational energy conservation equations). Flux-splitting procedures are developed for the fully coupled equations involving fluid dynamics, chemical production and thermodynamic relaxation processes. New forms of flux-vector split and flux-difference split algorithms are embodied in a fully coupled, implicit, large-block structure, including all the species conservation and energy production equations. Several numerical examples are presented, including high-temperature shock tube and nozzle flows. The methodology is compared to other existing techniques, including spectral and central-differenced procedures, and favorable comparisons are shown regarding accuracy, shock-capturing and convergence rates.
Tanner, Stephen P.
1997-01-01
One of the goals of the original proposal was to study how cross-linking affects the properties of an ion exchange material(IEM) developed at Lewis Research Center. However, prior to the start of this work, other workers at LERC investigated the effect of cross-linking on the properties of this material. Other than variation in the ion exchange capacity, the chemical characteristics were shown to be independent of the cross-linking agent, and the degree of cross-linking. New physical forms of the film were developed (film, supported film, various sizes of beads, and powder). All showed similar properties with respect to ion exchange equilibria but the kinetics of ion exchange depended on the surface area per unit mass; the powder form of the IEM exchanging much more rapidly than the other forms. The research performed under this grant was directed towards the application of the IEM to the analysis of metal ions at environmental concentrations.
Li, Guo; Su, Hang; Li, Xin; Kuhn, Uwe; Meusel, Hannah; Hoffmann, Thorsten; Ammann, Markus; Pöschl, Ulrich; Shao, Min; Cheng, Yafang
2016-08-01
Gaseous formaldehyde (HCHO) is an important precursor of OH radicals and a key intermediate molecule in the oxidation of atmospheric volatile organic compounds (VOCs). Budget analyses reveal large discrepancies between modeled and observed HCHO concentrations in the atmosphere. Here, we investigate the interactions of gaseous HCHO with soil surfaces through coated-wall flow tube experiments applying atmospherically relevant HCHO concentrations of ˜ 10 to 40 ppbv. For the determination of uptake coefficients (γ), we provide a Matlab code to account for the diffusion correction under laminar flow conditions. Under dry conditions (relative humidity = 0 %), an initial γ of (1.1 ± 0.05) × 10-4 is determined, which gradually drops to (5.5 ± 0.4) × 10-5 after 8 h experiments. Experiments under wet conditions show a smaller γ that drops faster over time until reaching a plateau. The drop of γ with increasing relative humidity as well as the drop over time can be explained by the adsorption theory in which high surface coverage leads to a reduced uptake rate. The fact that γ stabilizes at a non-zero plateau suggests the involvement of irreversible chemical reactions. Further back-flushing experiments show that two-thirds of the adsorbed HCHO can be re-emitted into the gas phase while the residual is retained by the soil. This partial reversibility confirms that HCHO uptake by soil is a complex process involving both adsorption/desorption and chemical reactions which must be considered in trace gas exchange (emission or deposition) at the atmosphere-soil interface. Our results suggest that soil and soil-derived airborne particles can either act as a source or a sink for HCHO, depending on ambient conditions and HCHO concentrations.
Dobrev, Plamen; Donnini, Serena; Groenhof, Gerrit; Grubmüller, Helmut
2017-01-10
Correct protonation of titratable groups in biomolecules is crucial for their accurate description by molecular dynamics simulations. In the context of constant pH simulations, an additional protonation degree of freedom is introduced for each titratable site, allowing the protonation state to change dynamically with changing structure or electrostatics. Here, we extend previous approaches for an accurate description of chemically coupled titrating sites. A second reaction coordinate is used to switch between two tautomeric states of an amino acid with chemically coupled titratable sites, such as aspartate (Asp), glutamate (Glu), and histidine (His). To this aim, we test a scheme involving three protonation states. To facilitate charge neutrality as required for periodic boundary conditions and Particle Mesh Ewald (PME) electrostatics, titration of each respective amino acid is coupled to a "water" molecule that is charged in the opposite direction. Additionally, a force field modification for Amber99sb is introduced and tested for the description of carboxyl group protonation. Our three states model is tested by titration simulations of Asp, Glu, and His, yielding a good agreement, reproducing the correct geometry of the groups in their different protonation forms. We further show that the ion concentration change due to the neutralizing "water" molecules does not significantly affect the protonation free energies of the titratable groups, suggesting that the three states model provides a good description of biomolecular dynamics at constant pH.
Chieng, Hei Ing; Lim, Linda B L; Priyantha, Namal
2015-01-01
Breadnut skin, in both its unmodified (KS) and base-modified (BM-KS) forms, was investigated for its potential use as a low-cost adsorbent for the removal of toxic dye, malachite green (MG). Characterization of the adsorbents was carried out using scanning electron microscope, X-ray fluorescence and Fourier transform infra-red spectroscopy. Batch adsorption experiments, carried out under optimized conditions, for the adsorption of MG were fitted using five isotherm models (Langmuir, Freundlich, Dubinin-Radushkevich, Temkin and Sips) and six error functions to determine the best-fit model. The adsorption capacity was greatly enhanced when breadnut skin was chemically modified with NaOH, leading to an adsorption capacity of 353.0 mg g(-1), that was far superior to most reported adsorbents for the removal of MG. Thermodynamics studies indicated that the adsorption of MG was spontaneous on KS and BM-KS, and the reactions were endothermic and exothermic, respectively. Kinetics studies showed that both followed the pseudo-second order. Regeneration experiments on BM-KS indicated that its adsorption capacity was still maintained at>90% even after five cycles. It can be concluded that NaOH-modified breadfruit skin has great potential to be utilized in real-life application as a low-cost adsorbent for the removal of MG in wastewater treatment.
Mori, Atsushi
2013-01-01
The work of formation of a critical nucleus is sometimes written as W=n{\\Delta}{\\mu}+{\\gamma}A. The first term W_{vol}=n{\\Delta}{\\mu} is called the volume term and the second term {\\gamma}A the surface term with {\\gamma} being the interfacial tension and A the area of the nucleus. Nishioka and Kusaka [J. Chem. Phys. 96 (1992) 5370] derived W_{vol}=n{\\Delta}{\\mu} with n=V_{\\beta}/v_{\\beta} and {\\Delta}{\\mu}={\\mu}_{\\beta}(T,p_{\\alpha})-{\\mu}_{\\alpha}(T,p_{\\alpha}) by rewriting W_{vol}=-(p_{\\beta}-p_{\\alpha})V_{\\beta} by integrating the isothermal Gibbs-Duhem relation for an incompressible {\\beta} phase, where {\\alpha} and {\\beta} represent the parent and nucleating phases, V_{\\beta} is the volume of the nucleus, v_{\\beta}, which is constant, the molecular volume of the {\\beta} phase, {\\mu}, T, and p denote the chemical potential, the temperature, and the pressure, respectively. We note here that {\\Delta}{\\mu}={\\mu}_{\\beta}(T,p_{\\alpha})-{\\mu}_{\\alpha}(T,p_{\\alpha}) is, in general, not a directly measurable quan...
Energy Technology Data Exchange (ETDEWEB)
Wolery, T.J.
1979-02-01
The newly developed EQ/36 software package computes equilibrium models of aqueous geochemical systems. The package contains two principal programs: EQ3 performs distribution-of-species calculations for natural water compositions; EQ6 uses the results of EQ3 to predict the consequences of heating and cooling aqueous solutions and of irreversible reaction in rock--water systems. The programs are valuable for studying such phenomena as the formation of ore bodies, scaling and plugging in geothermal development, and the long-term disposal of nuclear waste. EQ3 and EQ6 are compared with such well-known geochemical codes as SOLMNEQ, WATEQ, REDEQL, MINEQL, and PATHI. The data base allows calculations in the temperature interval 0 to 350{sup 0}C, at either 1 atm-steam saturation pressures or a constant 500 bars. The activity coefficient approximations for aqueous solutes limit modeling to solutions of ionic strength less than about one molal. The mathematical derivations and numerical techniques used in EQ6 are presented in detail. The program uses the Newton--Raphson method to solve the governing equations of chemical equilibrium for a system of specified elemental composition at fixed temperature and pressure. Convergence is aided by optimizing starting estimates and by under-relaxation techniques. The minerals present in the stable phase assemblage are found by several empirical methods. Reaction path models may be generated by using this approach in conjunction with finite differences. This method is analogous to applying high-order predictor--corrector methods to integrate a corresponding set of ordinary differential equations, but avoids propagation of error (drift). 8 figures, 9 tables.
Bugaev, K A; Sagun, V V; Ivanytskyi, A I; Cleymans, J; Mironchuk, E S; Nikonov, E G; Taranenko, A V; Zinovjev, G M
2016-01-01
We present an elaborate version of the hadron resonance gas model with the combined treatment of separate chemical freeze-outs for strange and non-strange hadrons and with an additional $\\gamma_{s}$ factor which accounts for the remaining strange particle non-equilibration. Within suggested approach the parameters of two chemical freeze-outs are connected by the conservation laws of entropy, baryonic charge, third isospin projection and strangeness. The developed model enables us to perform a high-quality fit of the hadron multiplicity ratios measured at AGS, SPS and RHIC with $\\chi^2/dof \\simeq 0.93$. A special attention is paid to a successful description of the Strangeness Horn. The well-known problem of selective suppression of $\\bar \\Lambda $ and $\\bar \\Xi$ hyperons is also discussed. The main result is that for all collision energies the $\\gamma_{s}$ factor is about 1 within the error bars, except for the center of mass collision energy 7.6 GeV at which we find about 20\\% enhancement of strangeness. Als...
Demaison, Jean; Császár, Attila G.
2012-09-01
Based on a sample of 38 molecules, 47 accurate equilibrium CO bond lengths have been collected and analyzed. These ultimate experimental (reEX), semiexperimental (reSE), and Born-Oppenheimer (reBO) equilibrium structures are compared to reBO estimates from two lower-level techniques of electronic structure theory, MP2(FC)/cc-pVQZ and B3LYP/6-311+G(3df,2pd). A linear relationship is found between the best equilibrium bond lengths and their MP2 or B3LYP estimates. These (and similar) linear relationships permit to estimate the CO bond length with an accuracy of 0.002 Å within the full range of 1.10-1.43 Å, corresponding to single, double, and triple CO bonds, for a large number of molecules. The variation of the CO bond length is qualitatively explained using the Atoms in Molecules method. In particular, a nice correlation is found between the CO bond length and the bond critical point density and it appears that the CO bond is at the same time covalent and ionic. Conditions which permit the computation of an accurate ab initio Born-Oppenheimer equilibrium structure are discussed. In particular, the core-core and core-valence correlation is investigated and it is shown to roughly increase with the bond length.
Energy Technology Data Exchange (ETDEWEB)
Veltman, Karin; McKone, Thomas E.; Huijbregts, Mark A.J.; Hendriks, A. Jan
2009-03-01
In the present study we develop and test a uniform model intended for single compartment analysis in the context of human and environmental risk assessment of airborne contaminants. The new aspects of the model are the integration of biological allometry with fugacity-based mass-balance theory to describe exchange of contaminants with air. The developed model is applicable to various mammalian species and a range of chemicals, while requiring few and typically well-known input parameters, such as the adult mass and composition of the species, and the octanol-water and air-water partition coefficient of the chemical. Accumulation of organic chemicals is typically considered to be a function of the chemical affinity forlipid components in tissues. Here, we use a generic description of chemical affinity for neutral and polar lipids and proteins to estimate blood-air partition coefficients (Kba) and tissue-air partition coefficients (Kta) for various mammals. This provides a more accurate prediction of blood-air partition coefficients, as proteins make up a large fraction of total blood components. The results show that 75percent of the modeled inhalation and exhalation rate constants are within a factor of 2 from independent empirical values for humans, rats and mice, and 87percent of the predicted blood-air partition coefficients are within a factor of 5 from empirical data. At steady-state, the bioaccumulation potential of air pollutants is shown to be mainly a function of the tissue-air partition coefficient and the biotransformation capacity of the species and depends weakly on the ventilation rate and the cardiac output of mammals.
van der Burg, W.; van Willigenburg, T.
1998-01-01
The basic idea of reflective equilibrium, as a method for theory construction and decision making in ethics, is that we should bring together a broad variety of moral and non-moral beliefs and, through a process of critical scrutiny and mutual adjustment, combine these into one coherent belief syste
van der Burg, W.; van Willigenburg, T.
1998-01-01
The basic idea of reflective equilibrium, as a method for theory construction and decision making in ethics, is that we should bring together a broad variety of moral and non-moral beliefs and, through a process of critical scrutiny and mutual adjustment, combine these into one coherent belief syste
Xu, Zhongnan; Joshi, Yogesh V; Raman, Sumathy; Kitchin, John R
2015-04-14
We validate the usage of the calculated, linear response Hubbard U for evaluating accurate electronic and chemical properties of bulk 3d transition metal oxides. We find calculated values of U lead to improved band gaps. For the evaluation of accurate reaction energies, we first identify and eliminate contributions to the reaction energies of bulk systems due only to changes in U and construct a thermodynamic cycle that references the total energies of unique U systems to a common point using a DFT + U(V) method, which we recast from a recently introduced DFT + U(R) method for molecular systems. We then introduce a semi-empirical method based on weighted DFT/DFT + U cohesive energies to calculate bulk oxidation energies of transition metal oxides using density functional theory and linear response calculated U values. We validate this method by calculating 14 reactions energies involving V, Cr, Mn, Fe, and Co oxides. We find up to an 85% reduction of the mean average error (MAE) compared to energies calculated with the Perdew-Burke-Ernzerhof functional. When our method is compared with DFT + U with empirically derived U values and the HSE06 hybrid functional, we find up to 65% and 39% reductions in the MAE, respectively.
Pluskal, Tomáš; Uehara, Taisuke; Yanagida, Mitsuhiro
2012-05-15
Mass spectrometry is commonly applied to qualitatively and quantitatively profile small molecules, such as peptides, metabolites, or lipids. Modern mass spectrometers provide accurate measurements of mass-to-charge ratios of ions, with errors as low as 1 ppm. Even such high mass accuracy, however, is not sufficient to determine the unique chemical formula of each ion, and additional algorithms are necessary. Here we present a universal software tool for predicting chemical formulas from high-resolution mass spectrometry data, developed within the MZmine 2 framework. The tool is based on the use of a combination of heuristic techniques, including MS/MS fragmentation analysis and isotope pattern matching. The performance of the tool was evaluated using a real metabolomic data set obtained with the Orbitrap MS detector. The true formula was correctly determined as the highest-ranking candidate for 79% of the tested compounds. The novel isotope pattern-scoring algorithm outperformed a previously published method in 64% of the tested Orbitrap spectra. The software described in this manuscript is freely available and its source code can be accessed within the MZmine 2 source code repository.
Niaz, M.
The main objective of this study is to construct a Lakatosian teaching strategy that can facilitate conceptual change in students'' understanding of chemical equilibrium. The strategy is based on the premise that cognitive conflicts must have been engendered by the students themselves in trying to cope with different problem solving strategies. Results obtained (based on Venezuelan freshman students) show that the performance of the experimental group of students was generally better (especially on the immediate post tests) than that of the control group. It is concluded that a conceptual change teaching strategy must take into consideration the following aspects: a) core beliefs of the students in the topic (cf. ''hard core'', Lakatos 1970); b) exploration of the relationship between core beliefs and student alternative conceptions (misconceptions); c) cognitive complexity of the core belief can be broken down into a series of related and probing questions; d) students resist changes in their core beliefs by postulating ''auxiliary hypotheses'' in order to resolve their contradictions; e) students'' responses based on their alternative conceptions must be considered not as wrong, but rather as models, perhaps in the same sense as used by scientists to break the complexity of a problem; and f) students'' misconceptions be considered as alternative conceptions (theories) that compete with the present scientific theories and at times recapitulate theories scientists held in the past.
Chau, Nancy H.
2009-01-01
This paper presents a capability-augmented model of on the job search, in which sweatshop conditions stifle the capability of the working poor to search for a job while on the job. The augmented setting unveils a sweatshop equilibrium in an otherwise archetypal Burdett-Mortensen economy, and reconciles a number of oft noted yet perplexing features of sweatshop economies. We demonstrate existence of multiple rational expectation equilibria, graduation pathways out of sweatshops in complete abs...
Methanol synthesis beyond chemical equilibrium
van Bennekom, J. G.; Venderbosch, R. H.; Winkelman, J. G. M.; Wilbers, E.; Assink, D.; Lemmens, K. P. J.; Heeres, H. J.
2013-01-01
In commercial methanol production from syngas, the conversion is thermodynamically limited to 0.3-0.7 leading to large recycles of non-converted syngas. This problem can be overcome to a significant extent by in situ condensation of methanol during its synthesis which is possible nowadays due to the
Energy Technology Data Exchange (ETDEWEB)
Montazer-Rahmati, Mohammad Mehdi, E-mail: mrahmati@ut.ac.ir [School of Chemical Engineering, College of Engineering, University of Tehran, P.O. Box: 11155-4563, Tehran 4563 (Iran, Islamic Republic of); Rabbani, Parisa; Abdolali, Atefeh [School of Chemical Engineering, College of Engineering, University of Tehran, P.O. Box: 11155-4563, Tehran 4563 (Iran, Islamic Republic of); Keshtkar, Ali Reza [Nuclear Science and Technology Research Institute, Atomic Energy Organization of Iran, P.O. Box: 11365-8486, Tehran (Iran, Islamic Republic of)
2011-01-15
Research highlights: {yields} The present study deals with the evaluation of biosorptive removal of Cd (II), Ni (II) and Pb (II) ions by both intact and pre-treated brown marine algae: Cystoseira indica, Sargassum glaucescens, Nizimuddinia zanardini and Padina australis treated with formaldehyde (FA), glutaraldehyde (GA), polyethylene imine (PEI), calcium chloride (CaCl{sub 2}) and hydrochloric acid (HCl). From the results obtained, chemically modification leads to higher capacity of biosorption. {yields} The equilibrium experimental data were tested using the most common isotherms. The results are best fitted by the Freundlich model among two-parameter models and the Toth, Khan and Radke-Prausnitz models among three-parameter isotherm models for Cd (II), Ni (II) and Pb (II), respectively. {yields} One-way ANOVA and one sample t-tests were performed on experimental data to evaluate the statistical significance of biosorption capacities after five cycles of sorption and desorption. {yields} The kinetic data were fitted by models including pseudo-first-order and pseudo-second-order. From the results obtained, the pseudo-second-order kinetic model describes best the biosorption of cadmium, nickel and lead ions. - Abstract: The present study deals with the evaluation of biosorptive removal of Cd (II), Ni (II) and Pb (II) ions by both intact and pre-treated brown marine algae: Cystoseira indica, Sargassum glaucescens, Nizimuddinia zanardini and Padina australis treated with formaldehyde (FA), glutaraldehyde (GA), polyethylene imine (PEI), calcium chloride (CaCl{sub 2}) and hydrochloric acid (HCl). Batch shaking adsorption experiments were performed in order to examine the effects of pH, contact time, biomass concentration, biomass treatment and initial metal concentration on the removal process. The optimum sorption conditions for each heavy metal are presented. One-way ANOVA and one sample t-tests were performed on experimental data to evaluate the statistical
Wetmore, Stacey D.; Eriksson, Leif A.; Boyd, Russell J.
1998-12-01
The hyperfine coupling constants (HFCCs) in the hydroxyl radical are investigated through comparison of results obtained from a variety of quantum chemical methods. The couplings obtained from the multi-reference configuration interaction (MRCI) wave function, built upon the restricted open-shell Hartree-Fock (ROHF) reference determinant, are investigated in terms of the basis set, the configuration selection energy threshold, and the size of the reference space. Overall results which converge to the experimental couplings are obtained for hydrogen, but not for oxygen. In particular, the MRCI method shows no improvement over density functional theory (the B3LYP functional), for the calculation of Aiso(17O). On the other hand, results in excellent agreement with experiment are obtained through the use of the quadratic configuration interaction (QCISD) method based on the unrestricted HF (UHF) reference determinant with the identical basis sets. Examination of UHF and ROHF based coupled-cluster methods, CCSD and CCSD(T), indicates that once a high enough level of electron correlation is included, the oxygen HFCC is independent of the form of the reference determinant. Unlike the ROHF-CCSD method, which yields reliable results once the effects of triple excitations have been taken into account, the MRCI wave function cannot easily be adjusted to account for the inadequacies of the ROHF reference determinant in order to accurately predict 17O HFCCs.
de Oliveira, Mário J
2017-01-01
This textbook provides an exposition of equilibrium thermodynamics and its applications to several areas of physics with particular attention to phase transitions and critical phenomena. The applications include several areas of condensed matter physics and include also a chapter on thermochemistry. Phase transitions and critical phenomena are treated according to the modern development of the field, based on the ideas of universality and on the Widom scaling theory. For each topic, a mean-field or Landau theory is presented to describe qualitatively the phase transitions. These theories include the van der Waals theory of the liquid-vapor transition, the Hildebrand-Heitler theory of regular mixtures, the Griffiths-Landau theory for multicritical points in multicomponent systems, the Bragg-Williams theory of order-disorder in alloys, the Weiss theory of ferromagnetism, the Néel theory of antiferromagnetism, the Devonshire theory for ferroelectrics and Landau-de Gennes theory of liquid crystals. This new edit...
Oliveira, Mário J
2013-01-01
This textbook provides an exposition of equilibrium thermodynamics and its applications to several areas of physics with particular attention to phase transitions and critical phenomena. The applications include several areas of condensed matter physics and include also a chapter on thermochemistry. Phase transitions and critical phenomena are treated according to the modern development of the field, based on the ideas of universality and on the Widom scaling theory. For each topic, a mean-field or Landau theory is presented to describe qualitatively the phase transitions. These theories include the van der Waals theory of the liquid-vapor transition, the Hildebrand-Heitler theory of regular mixtures, the Griffiths-Landau theory for multicritical points in multicomponent systems, the Bragg-Williams theory of order-disorder in alloys, the Weiss theory of ferromagnetism, the Néel theory of antiferromagnetism, the Devonshire theory for ferroelectrics and Landau-de Gennes theory of liquid crystals. This textbo...
Larsen, K K; Wielandt, D; Schiller, M; Bizzarro, M
2016-04-22
Chromatographic purification of chromium (Cr), which is required for high-precision isotope analysis, is complicated by the presence of multiple Cr-species with different effective charges in the acid digested sample aliquots. The differing ion exchange selectivity and sluggish reaction rates of these species can result in incomplete Cr recovery during chromatographic purification. Because of large mass-dependent inter-species isotope fractionation, incomplete recovery can affect the accuracy of high-precision Cr isotope analysis. Here, we demonstrate widely differing cation distribution coefficients of Cr(III)-species (Cr(3+), CrCl(2+) and CrCl2(+)) with equilibrium mass-dependent isotope fractionation spanning a range of ∼1‰/amu and consistent with theory. The heaviest isotopes partition into Cr(3+), intermediates in CrCl(2+) and the lightest in CrCl2(+)/CrCl3°. Thus, for a typical reported loss of ∼25% Cr (in the form of Cr(3+)) through chromatographic purification, this translates into 185 ppm/amu offset in the stable Cr isotope ratio of the residual sample. Depending on the validity of the mass-bias correction during isotope analysis, this further results in artificial mass-independent effects in the mass-bias corrected (53)Cr/(52)Cr (μ(53)Cr* of 5.2 ppm) and (54)Cr/(52)Cr (μ(54)Cr* of 13.5 ppm) components used to infer chronometric and nucleosynthetic information in meteorites. To mitigate these fractionation effects, we developed strategic chemical sample pre-treatment procedures that ensure high and reproducible Cr recovery. This is achieved either through 1) effective promotion of Cr(3+) by >5 days exposure to HNO3H2O2 solutions at room temperature, resulting in >∼98% Cr recovery for most types of sample matrices tested using a cationic chromatographic retention strategy, or 2) formation of Cr(III)-Cl complexes through exposure to concentrated HCl at high temperature (>120 °C) for several hours, resulting in >97.5% Cr recovery using a
DEFF Research Database (Denmark)
Bergemann, Maria; Collet, Remo; Schönrich, Ralph
2016-01-01
We have analysed high-resolution spectra of 328 stars and derived Mg abundances using non-local thermodynamic equilibrium (NLTE) spectral line formation calculations and plane-parallel model stellar atmospheres derived from the mean stratification of 3D hydrodynamical surface convection simulations....../Fe] ratios close to solar even at [Fe/H] ~ -2. This is at variance with results of classical abundance analyses based on local thermodynamic equilibrium (LTE) and 1D model stellar atmospheres, which argue for a constant elevated [Mg/Fe] in metal-poor stars of the Galactic thick disk and halo....
2008-09-19
Goldman S. D. et a ..., Geochim. Cosmochim. Acta (2008), doi:10.1016/j.gca.2008.09tions of Urey (1947). First, we predicted the equilibrium constants...11623–11627. Urey H. C. (1947) The thermodynamic properties of isotopic substances. J. Chem. Soc., 562–581. Walker J. C. G., Klein C., Schidlowski M
Settle, Frank A., Jr.
Presented are the teacher's guide and student materials for one of a series of self-instructional, computer-based learning modules for an introductory, undergraduate chemistry course. The student manual for this acid-base equilibria unit includes objectives, prerequisites, pretest, a discussion of equilibrium constants, and 20 problem sets.…
Ricard, Jacques
2010-01-01
The present article discusses the possibility that catalysed chemical networks can evolve. Even simple enzyme-catalysed chemical reactions can display this property. The example studied is that of a two-substrate proteinoid, or enzyme, reaction displaying random binding of its substrates A and B. The fundamental property of such a system is to display either emergence or integration depending on the respective values of the probabilities that the enzyme has bound one of its substrate regardless it has bound the other substrate, or, specifically, after it has bound the other substrate. There is emergence of information if p(A)>p(AB) and p(B)>p(BA). Conversely, if p(A)
equilibrium. Moreover, in such systems, emergence results in an increase of the energy level of the ternary EAB complex that becomes closer to the transition state of the reaction, thus leading to the enhancement of catalysis. Hence a drift from quasi-equilibrium is, to a large extent, responsible for the production of information and enhancement of catalysis. Non-equilibrium of these simple systems must be an important aspect that leads to both self-organization and evolutionary processes. These conclusions can be extended to networks of catalysed chemical reactions. Such networks are, in fact, networks of networks, viz. meta-networks. In this formal representation, nodes are chemical reactions catalysed by poorly specific proteinoids, and links can be identified to the transport of metabolites from proteinoid to proteinoid. The concepts of integration and emergence can be applied to such situations and can be used to define the identity of these networks and therefore their evolution. Defined as open non-equilibrium structures, such biochemical networks possess two remarkable properties: (1) the probability of occurrence of their nodes is dependant upon the input and output of matter
Using ant colony algorithm to calculate the chemical equilibrium of complex system%利用蚁群算法计算复杂体系化学平衡
Institute of Scientific and Technical Information of China (English)
胡元; 李尚勇; 谢刚
2012-01-01
基于Gibbs自由能最小原理,本文利用蚁群算法构建了一个复杂体系化学平衡计算的数值计算模型.该模型嵌入局部搜索算法以提高计算精度,通过蚁群移动以获取全局最优解.通过算法验证计算表明,该模型能够作为一种复杂体系化学平衡计算的方法.%Based on the Gibbs free energy minimization method, we use ant colony algorithm to build a numerical calculation model of chemical equilibrium calculations of complex system. The model is embedded into the local search algorithm to improve precision in calculation and through the colony moved to obtain global optimal solution. Algorithm validation results show that the model can be used as a method of chemical equilibrium calculations of complex system.
Yokogawa, Daisuke; Ono, Kohei; Sato, Hirofumi; Sakaki, Shigeyoshi
2011-11-14
The ligand exchange process of cis-platin in aqueous solution was studied using RISM-SCF-SEDD (reference interaction site model-self-consistent field with spatial electron density distribution) method, a hybrid approach of quantum chemistry and statistical mechanics. The analytical nature of RISM theory enables us to compute accurate reaction free energy in aqueous solution based on CCSD(T), together with the microscopic solvation structure around the complex. We found that the solvation effect is indispensable to promote the dissociation of the chloride anion from the complex.
Directory of Open Access Journals (Sweden)
Liqi Li
Full Text Available Protein structure prediction is critical to functional annotation of the massively accumulated biological sequences, which prompts an imperative need for the development of high-throughput technologies. As a first and key step in protein structure prediction, protein structural class prediction becomes an increasingly challenging task. Amongst most homological-based approaches, the accuracies of protein structural class prediction are sufficiently high for high similarity datasets, but still far from being satisfactory for low similarity datasets, i.e., below 40% in pairwise sequence similarity. Therefore, we present a novel method for accurate and reliable protein structural class prediction for both high and low similarity datasets. This method is based on Support Vector Machine (SVM in conjunction with integrated features from position-specific score matrix (PSSM, PROFEAT and Gene Ontology (GO. A feature selection approach, SVM-RFE, is also used to rank the integrated feature vectors through recursively removing the feature with the lowest ranking score. The definitive top features selected by SVM-RFE are input into the SVM engines to predict the structural class of a query protein. To validate our method, jackknife tests were applied to seven widely used benchmark datasets, reaching overall accuracies between 84.61% and 99.79%, which are significantly higher than those achieved by state-of-the-art tools. These results suggest that our method could serve as an accurate and cost-effective alternative to existing methods in protein structural classification, especially for low similarity datasets.
Li, Liqi; Cui, Xiang; Yu, Sanjiu; Zhang, Yuan; Luo, Zhong; Yang, Hua; Zhou, Yue; Zheng, Xiaoqi
2014-01-01
Protein structure prediction is critical to functional annotation of the massively accumulated biological sequences, which prompts an imperative need for the development of high-throughput technologies. As a first and key step in protein structure prediction, protein structural class prediction becomes an increasingly challenging task. Amongst most homological-based approaches, the accuracies of protein structural class prediction are sufficiently high for high similarity datasets, but still far from being satisfactory for low similarity datasets, i.e., below 40% in pairwise sequence similarity. Therefore, we present a novel method for accurate and reliable protein structural class prediction for both high and low similarity datasets. This method is based on Support Vector Machine (SVM) in conjunction with integrated features from position-specific score matrix (PSSM), PROFEAT and Gene Ontology (GO). A feature selection approach, SVM-RFE, is also used to rank the integrated feature vectors through recursively removing the feature with the lowest ranking score. The definitive top features selected by SVM-RFE are input into the SVM engines to predict the structural class of a query protein. To validate our method, jackknife tests were applied to seven widely used benchmark datasets, reaching overall accuracies between 84.61% and 99.79%, which are significantly higher than those achieved by state-of-the-art tools. These results suggest that our method could serve as an accurate and cost-effective alternative to existing methods in protein structural classification, especially for low similarity datasets.
Directory of Open Access Journals (Sweden)
Bauerfeldt Glauco F.
2000-01-01
Full Text Available Numerical integration of the coupled differential equations which describe a chemical reacting system and sensitivity analysis are becoming increasingly important tools in chemical kinetics. In this work, a numerical modelling analysis of the chemical processes in the gas-phase decomposition of pure CF4 and CF4/O2 mixtures, in the presence of silicon, was performed. The relative importance of individual processes was analysed and the sensitivity coefficients as well as the effect of the parameters uncertainties were determined . The results were compared with experimental data from the literature to adjust the model parameters. The main etching agent in the system is the fluorine atom. The concentrations of the main species (SiF4, CO, CO2 and COF2 depend on the composition of the mixture.
Montazer-Rahmati, Mohammad Mehdi; Rabbani, Parisa; Abdolali, Atefeh; Keshtkar, Ali Reza
2011-01-15
The present study deals with the evaluation of biosorptive removal of Cd (II), Ni (II) and Pb (II) ions by both intact and pre-treated brown marine algae: Cystoseira indica, Sargassum glaucescens, Nizimuddinia zanardini and Padina australis treated with formaldehyde (FA), glutaraldehyde (GA), polyethylene imine (PEI), calcium chloride (CaCl(2)) and hydrochloric acid (HCl). Batch shaking adsorption experiments were performed in order to examine the effects of pH, contact time, biomass concentration, biomass treatment and initial metal concentration on the removal process. The optimum sorption conditions for each heavy metal are presented. One-way ANOVA and one sample t-tests were performed on experimental data to evaluate the statistical significance of biosorption capacities after five cycles of sorption and desorption. The equilibrium experimental data were tested using the most common isotherms. The results are best fitted by the Freundlich model among two-parameter models and the Toth, Khan and Radke-Prausnitz models among three-parameter isotherm models for Cd (II), Ni (II) and Pb (II), respectively. The kinetic data were fitted by models including pseudo-first-order and pseudo-second-order. From the results obtained, the pseudo-second-order kinetic model best describes the biosorption of cadmium, nickel and lead ions.
Energy Technology Data Exchange (ETDEWEB)
Suzuki-Muresan, Tomo; Perrigaud, Katy; Vandenborre, Johan; Ribet, Solange; Grambow, Bernd [Nantes Univ., CNRS/IN2P3 (France). SUBATECH Unite Mixte de Recherche 6457; Takamasa, Inai [TOKAI Univ., Kanagawa (Japan)
2017-08-01
This work aims to assess the solubility and the surface reactivity of crystallized thorium at pH 3.0 in presence of three types of solids: synthesized powder at 1300 C, crushed kernel, and intact kernel. In this study, the kernel is composed by the core solid from high temperature reactors (HTR) sphere particles. The originality of this work consisted in following in a sequential order the kinetic of dissolution, the surface reactivity in presence of isotope tracer {sup 229}Th, and its desorption process. Long time experiments (634 days) allowed to get deeper understanding on the behavior of the surface reactivity in contact with the solution. Solubility values are ranging from 0.3 x 10{sup -7} mol.L{sup -1} to 3 x 10{sup -7} mol.L{sup -1} with a dissolution rate of 10{sup -6}-10{sup -4} g.m{sup -2} day{sup -1}. PHREEQC modeling showed that crystallized ThO{sub 2}(cr, 20 nm) phase controls the equilibrium in solution. Isotope exchange between {sup 229}Th and {sup 232}Th indicated that well-crystallized phase exist as an inert surface regarding to the absence of exchange between surface solid and solution.
Directory of Open Access Journals (Sweden)
Israel Pala Rosas
2017-02-01
Full Text Available Glycerol dehydration to acrolein was studied with three catalysts using zeolite-Y. This zeolite in its protonic form (HY, with La (LaY and Pd with La (Pd/LaY, was characterized by X-ray diffraction (XRD, Fourier-transform-infrared spectroscopy (FTIR with pyridine, BET, Scanning Electron Microscope (SEM–Energy-Dispersive Spectroscopy X-ray (EDS and the catalytic activity tests were carried out under H2 atmosphere. It was found that La ions exchanged in the zeolite-Y resulted in the improvement of both glycerol conversion and yield to acrolein, also a relatively constant glycerol conversion was achieved up to three hours, due to the presence of Pd on the catalyst and H2 in the feed. The comparison of the calculated and experimental yields obtained from the catalytic tests of the Pd/LaY catalyst indicates a greater activity for the reaction to acrolein than for the reaction to acetol. The calculated equilibrium yields of the dehydration reaction from glycerol to acrolein, acetol, ethanal, methanol, and water and the experimental yields of a Pd/LaY catalyst were compared. Thermodynamically, a complete conversion of glycerol can be achieved since the general system remains exothermic and promotes the path to acetol below 480 K. Above this temperature the system consumes energy and favors the production of acrolein, reaching its maximum concentration at 600 K.
Ballard, Nicholas; Bon, Stefan A F
2015-06-15
The effective stabilization of emulsions by solid particles, a phenomenon known as Pickering stabilization, is well known to be highly dependent on the wettability and the adhesion energy of the stabilizer employed at the liquid-liquid interface. We present a user-friendly computational model that can be used to determine equilibrium orientations and the adhesion energy of colloidal particles at interfaces. The model determines the free energy profile of particle adsorption at liquid-liquid interfaces using a triangular tessellation scheme. We demonstrate the use of the model, using a variety of anisotropic particles and demonstrate its ability to predict and explain experimental observations of particle behaviour at interfaces. In particular, we show that the concept of hydrophilic lipophilic balance commonly applied to molecular surfactants is insufficient to explain the complexity of the activity of colloidal particles at interfaces. In addition, we show the importance of the knowledge of the free energy adsorption profile of single particles at interfaces and the impact on overall free energy of emulsification of packed ensembles of particles. The delicate balance between optimization of adhesion energy, adsorption dynamics and particle packing is shown to be of great importance in the formation of thermodynamically stable emulsions. In order to use the model, the code is implemented by freely available software that can be readily deployed on personal computers. Copyright © 2015 Elsevier Inc. All rights reserved.
McKean, Donald C; Law, Mark M; Groner, Peter; Conrad, Andrew R; Tubergen, Michael J; Feller, David; Moore, Michael C; Craig, Norman C
2010-09-02
Infrared (IR) spectra in the gas phase are reported for CF(2)=CHD and CF(2)=CD(2) in the region 350-4000 cm(-1). Ab initio calculations of an harmonic force-field and anharmonicity constants have been made with an MP2/aug-cc-pVTZ model. These enable a number of Fermi resonances in each species to be analyzed and a complete set of "observed" harmonic frequencies to be derived. The latter are combined with similar data for CF(2)=CH(2) in a scaling of the model harmonic force field to both anharmonic and harmonic frequencies. Inspection of the scale factors reveals minor defects of the model, evident in the out-of-plane wagging modes and in the CF stretch/CF stretch interaction force constant. Fermi resonance treatments involved in all isotopomers studied are compatible with the overall force-field refinement results. The treatment leaves a small anomaly in the (13)C shift on nu(1). Improved microwave spectra are reported for five isotopic species, and a semiexperimental equilibrium structure for F(2)C=CH(2) is determined and compared favorably with the structure obtained from new high-level ab initio calculations. Centrifugal distortion constants are predicted for the five isotopic species, and those for F(2)C=CH(2) are compared with values fit to microwave spectra.
Guirguis, Laila A.; Farag, Nagdy M.; Salim, Adham K.
2015-03-01
The present study aims to use the α-spectroscopy at Nuclear Materials Authority (NMA) of Egypt. A radiochemical technique for analysis uranium isotopes was carried out for ten mineralized granitic samples together with the International standards RGU-1 (IAEA) and St4 (NMA). Several steps of sample preparation, radiochemical separation and source preparation were performed before analysis. Uranium was separated from sample matrix with 0.2 M TOPO in cyclohexane as an extracting agent with a chemical yield 98.95% then uranium was purified from lanthanides and actinides present with 0.2 M TOA in xylene as an extracting agent. The pure fraction was electrodeposited on a mirror-polished copper disc from buffer solution (NaHSO4+H2SO4+NH4OH). Rectangle pt-electrode with an anode-cathode distance of 2 cm was used. Current was 900 mA and the electrodeposition time reach up to 120 min. The achieved results show that the chemical yield ranged between 87.9±6.8 and 98±8.6.
Ion exchange equilibrium constants
Marcus, Y
2013-01-01
Ion Exchange Equilibrium Constants focuses on the test-compilation of equilibrium constants for ion exchange reactions. The book first underscores the scope of the compilation, equilibrium constants, symbols used, and arrangement of the table. The manuscript then presents the table of equilibrium constants, including polystyrene sulfonate cation exchanger, polyacrylate cation exchanger, polymethacrylate cation exchanger, polysterene phosphate cation exchanger, and zirconium phosphate cation exchanger. The text highlights zirconium oxide anion exchanger, zeolite type 13Y cation exchanger, and
The Theory of Variances in Equilibrium Reconstruction
Energy Technology Data Exchange (ETDEWEB)
Zakharov, Leonid E.; Lewandowski, Jerome; Foley, Elizabeth L.; Levinton, Fred M.; Yuh, Howard Y.; Drozdov, Vladimir; McDonald, Darren
2008-01-14
The theory of variances of equilibrium reconstruction is presented. It complements existing practices with information regarding what kind of plasma profiles can be reconstructed, how accurately, and what remains beyond the abilities of diagnostic systems. The σ-curves, introduced by the present theory, give a quantitative assessment of quality of effectiveness of diagnostic systems in constraining equilibrium reconstructions. The theory also suggests a method for aligning the accuracy of measurements of different physical nature.
Energy Technology Data Exchange (ETDEWEB)
Guirguis, Laila A., E-mail: lailagurgus@yahoo.com; Farag, Nagdy M.; Salim, Adham K.
2015-03-21
The present study aims to use the α-spectroscopy at Nuclear Materials Authority (NMA) of Egypt. A radiochemical technique for analysis uranium isotopes was carried out for ten mineralized granitic samples together with the International standards RGU-1 (IAEA) and St{sub 4} (NMA). Several steps of sample preparation, radiochemical separation and source preparation were performed before analysis. Uranium was separated from sample matrix with 0.2 M TOPO in cyclohexane as an extracting agent with a chemical yield 98.95% then uranium was purified from lanthanides and actinides present with 0.2 M TOA in xylene as an extracting agent. The pure fraction was electrodeposited on a mirror-polished copper disc from buffer solution (NaHSO{sub 4}+H{sub 2}SO{sub 4}+NH{sub 4}OH). Rectangle pt-electrode with an anode-cathode distance of 2 cm was used. Current was 900 mA and the electrodeposition time reach up to 120 min. The achieved results show that the chemical yield ranged between 87.9±6.8 and 98±8.6. - Highlights: • Radiochemical technique for analysis uranium isotopes. • Alpha-particle spectrometry is performed after a radiochemical procedure. • Electrodeposition conditions for preparation of alpha uranium source. • Using {sup 232}U (t{sub 1/2}=70.6a, E{sub α}=5320.24 keV, intensity=69.1%) as an internal tracer makes it a highly reliable technique.
Institute of Scientific and Technical Information of China (English)
LI Wenpeng; LIU Zhenying
2008-01-01
Firstly, the macroscopic chemical equilibrium state of a series of chemical reactions between intercrystal brine and its media salt layer (salt deposit) in Qarhan Salt Lake was studied by using the Pitzer theory. The concept of macroscopic solubility product and its relation with accumulated ore dissolving ratio were presented, which are used in the numerical model of dissolving and driving exploitation of potassium salt in Qarhan Salt Lake. And secondly, with a model forming idea oftransport model for reacting solutes in the multi-component fresh groundwater system in porous media being a reference, a two-dimensional transport model coupled with a series of chemical reactions in a multi-component brine porous system (salt deposits) was developed by using the Pitzer theory.Meanwhile, the model was applied to model potassium/magnesium transport in Qarhan Salt Lake in order to study the transfer law of solid and liquid phases in the dissolving and driving process and to design the optimal injection/abstraction strategy for dissolving and capturing maximum Potassium/Magnesium in the mining of salt deposits in Qarhan Salt Lake.
Two-dimensional equilibrium in coronal magnetostatic flux tubes: an accurate equilibrium solver
Belien, A. J. C.; Poedts, S.; Goedbloed, J. P.
1997-01-01
To study linearized magnetohydrodynamic (MHD) waves, continuous spectra, and instabilities in coronal magnetic flux tubes that are anchored in dense chromospheric and photospheric regions, a two-dimensional numerical code, called PARIS, has been developed. PARIS solves the pertinent nonlinear Grad-S
Institute of Scientific and Technical Information of China (English)
吕俊明; 潘宏禄; 苗文博; 程晓丽
2014-01-01
高空高马赫数条件下，化学非平衡效应将对飞行器气动特性产生影响，影响飞行器气动布局优化和飞行弹道设计。文章通过三维化学非平衡流动求解程序，针对再入返回器开展数值研究与机理分析，通过对比完全气体模型和化学非平衡气体模型获得的气动力参数，揭示化学非平衡效应对流场结构和气动力特性的影响和规律。结果表明，对Apollo的气动力计算结果验证了模型和计算方法；化学非平衡效应影响下，激波层内化学反应消耗大量能量，致使激波脱体距离减小，气体压缩性增强；典型状态高度为70 km，Ma=30条件下，化学非平衡效应导致返回器升力系数增大约6%、阻力系数增大约1.3%～3.3%、升阻比增大3%左右、俯仰力矩系数增大，从而使配平攻角减小约2.5°；通过机理分析，发现化学非平衡效应影响下表面压力系数发生变化的原因是飞行器周围激波形状及驻点压力改变，表现为气体沿流线经激波层、压缩区和膨胀区的历程变化；对于钝体形状的返回器，迎风面前体压力系数增加和后体压力系数降低，造成轴向力和法向力系数增大。%Chemical non-equilibrium effect has a strong impact on aerodynamic characteristics of vehi-cles flying at high altitude and highMa number, which will affect aerodynamic shape optimization and flight trajectory design. The numerical investigation and mechanism analysis are carried out on reentry vehicles using a three dimensional chemical non-equilibrium flow solver, to understand the impact and regularity of chemical non-equilibrium effect on the flow field structures and aerodynamic forces, in comparison with a perfect gas model. The good agreement between current result and reference data for AS-202 flight test validates the model and numerical methods. The stand-off distance of the forebody shockwave is reduced, and the compressibility of
ON VECTOR NETWORK EQUILIBRIUM PROBLEMS
Institute of Scientific and Technical Information of China (English)
Guangya CHEN
2005-01-01
In this paper we define a concept of weak equilibrium for vector network equilibrium problems.We obtain sufficient conditions of weak equilibrium points and establish relation with vector network equilibrium problems and vector variational inequalities.
Non-Equilibrium Properties from Equilibrium Free Energy Calculations
Pohorille, Andrew; Wilson, Michael A.
2012-01-01
Calculating free energy in computer simulations is of central importance in statistical mechanics of condensed media and its applications to chemistry and biology not only because it is the most comprehensive and informative quantity that characterizes the eqUilibrium state, but also because it often provides an efficient route to access dynamic and kinetic properties of a system. Most of applications of equilibrium free energy calculations to non-equilibrium processes rely on a description in which a molecule or an ion diffuses in the potential of mean force. In general case this description is a simplification, but it might be satisfactorily accurate in many instances of practical interest. This hypothesis has been tested in the example of the electrodiffusion equation . Conductance of model ion channels has been calculated directly through counting the number of ion crossing events observed during long molecular dynamics simulations and has been compared with the conductance obtained from solving the generalized Nernst-Plank equation. It has been shown that under relatively modest conditions the agreement between these two approaches is excellent, thus demonstrating the assumptions underlying the diffusion equation are fulfilled. Under these conditions the electrodiffusion equation provides an efficient approach to calculating the full voltage-current dependence routinely measured in electrophysiological experiments.
Medical Service
2002-01-01
It is reminded that all persons who use chemicals must inform CERN's Chemistry Service (TIS-GS-GC) and the CERN Medical Service (TIS-ME). Information concerning their toxicity or other hazards as well as the necessary individual and collective protection measures will be provided by these two services. Users must be in possession of a material safety data sheet (MSDS) for each chemical used. These can be obtained by one of several means : the manufacturer of the chemical (legally obliged to supply an MSDS for each chemical delivered) ; CERN's Chemistry Service of the General Safety Group of TIS ; for chemicals and gases available in the CERN Stores the MSDS has been made available via EDH either in pdf format or else via a link to the supplier's web site. Training courses in chemical safety are available for registration via HR-TD. CERN Medical Service : TIS-ME :73186 or service.medical@cern.ch Chemistry Service : TIS-GS-GC : 78546
Thermodynamics and fluctuations far from equilibrium
Ross, John
2008-01-01
This book deals with the formulation of the thermodynamics of chemical and other systems far from equilibrium, including connections to fluctuations. It contains applications to non-equilibrium stationary states and approaches to such states, systems with multiple stationary states, stability and equi-stability conditions, reaction diffusion systems, transport properties, and electrochemical systems. The theoretical treatment is complemented by experimental results to substantiate the formulation. Dissipation and efficiency are analyzed in autonomous and externally forced reactions, including several biochemical systems.
A Simple and Accurate Network for Hydrogen and Carbon Chemistry in the ISM
Gong, Munan; Wolfire, Mark G
2016-01-01
Chemistry plays an important role in the interstellar medium (ISM), regulating heating and cooling of the gas, and determining abundances of molecular species that trace gas properties in observations. Although solving the time-dependent equations is necessary for accurate abundances and temperature in the dynamic ISM, a full chemical network is too computationally expensive to incorporate in numerical simulations. In this paper, we propose a new simplified chemical network for hydrogen and carbon chemistry in the atomic and molecular ISM. We compare our chemical network in detail with results from a full photo-dissociation region (PDR) code, and also with the Nelson & Langer (1999) (NL99) network previously adopted in the simulation literature. We show that our chemical network gives similar results to the PDR code in the equilibrium abundances of all species over a wide range of densities, temperature, and metallicities, whereas the NL99 network shows significant disagreement. Applying our network in 1D...
Energy Technology Data Exchange (ETDEWEB)
Berty, J.M.; Krishnan, C.; Elliott, J.R. Jr. (Berty Reaction Engineers, Ltd. (USA))
1990-10-01
Methanol is synthesised catalytically from H{sub 2}, CO and CO{sub 2}. Equilibrium considerations dictated the use of high pressures until the advent of copper-based catalysts. But equilibrium problems still exist; single pass conversions of CO and H{sub 2} are low, typically 30-40%. A solvent methanol process (SMP) is proposed to overcome existing problems. A high-boiling inert solvent is introduced with the synthesis gas. The solvent selectively absorbs CH{sub 3}OH, thus shifting the equilibrium towards the product. The strongest solvent identified and tested is tetraethyleneglycol dimethyl ether (tetraglyme). 24 refs., 4 figs., 2 tabs.
Stochastic approach to equilibrium and nonequilibrium thermodynamics.
Tomé, Tânia; de Oliveira, Mário J
2015-04-01
We develop the stochastic approach to thermodynamics based on stochastic dynamics, which can be discrete (master equation) and continuous (Fokker-Planck equation), and on two assumptions concerning entropy. The first is the definition of entropy itself and the second the definition of entropy production rate, which is non-negative and vanishes in thermodynamic equilibrium. Based on these assumptions, we study interacting systems with many degrees of freedom in equilibrium or out of thermodynamic equilibrium and how the macroscopic laws are derived from the stochastic dynamics. These studies include the quasiequilibrium processes; the convexity of the equilibrium surface; the monotonic time behavior of thermodynamic potentials, including entropy; the bilinear form of the entropy production rate; the Onsager coefficients and reciprocal relations; and the nonequilibrium steady states of chemical reactions.
Marques, Wilson, Jr.; Jacinta Soares, Ana; Pandolfi Bianchi, Miriam; Kremer, Gilberto M.
2015-06-01
A shock wave structure problem, like the one which can be formulated for the planar detonation wave, is analyzed here for a binary mixture of ideal gases undergoing the symmetric reaction {{A}1}+{{A}1}\\rightleftharpoons {{A}2}+{{A}2}. The problem is studied at the hydrodynamic Euler limit of a kinetic model of the reactive Boltzmann equation. The chemical rate law is deduced in this frame with a second-order reaction rate, in a chemical regime such that the gas flow is not far away from the chemical equilibrium. The caloric and the thermal equations of state for the specific internal energy and temperature are employed to close the system of balance laws. With respect to other approaches known in the kinetic literature for detonation problems with a reversible reaction, this paper aims to improve some aspects of the wave solution. Within the mathematical analysis of the detonation model, the equation of the equilibrium Hugoniot curve of the final states is explicitly derived for the first time and used to define the correct location of the equilibrium Chapman-Jouguet point in the Hugoniot diagram. The parametric space is widened to investigate the response of the detonation solution to the activation energy of the chemical reaction. Finally, the mathematical formulation of the linear stability problem is given for the wave detonation structure via a normal-mode approach, when bidimensional disturbances perturb the steady solution. The stability equations with their boundary conditions and the radiation condition of the considered model are explicitly derived for small transversal deviations of the shock wave location. The paper shows how a second-order chemical kinetics description, derived at the microscopic level, and an analytic deduction of the equilibrium Hugoniot curve, lead to an accurate picture of the steady detonation with reversible reaction, as well as to a proper bidimensional linear stability analysis.
Thermodynamics "beyond" local equilibrium
Vilar, Jose; Rubi, Miguel
2002-03-01
Nonequilibrium thermodynamics has shown its applicability in a wide variety of different situations pertaining to fields such as physics, chemistry, biology, and engineering. As successful as it is, however, its current formulation considers only systems close to equilibrium, those satisfying the so-called local equilibrium hypothesis. Here we show that diffusion processes that occur far away from equilibrium can be viewed as at local equilibrium in a space that includes all the relevant variables in addition to the spatial coordinate. In this way, nonequilibrium thermodynamics can be used and the difficulties and ambiguities associated with the lack of a thermodynamic description disappear. We analyze explicitly the inertial effects in diffusion and outline how the main ideas can be applied to other situations. [J.M.G. Vilar and J.M. Rubi, Proc. Natl. Acad. Sci. USA 98, 11081-11084 (2001)].
Directory of Open Access Journals (Sweden)
Katalin Martinás
2007-02-01
Full Text Available A microeconomic, agent based framework to dynamic economics is formulated in a materialist approach. An axiomatic foundation of a non-equilibrium microeconomics is outlined. Economic activity is modelled as transformation and transport of commodities (materials owned by the agents. Rate of transformations (production intensity, and the rate of transport (trade are defined by the agents. Economic decision rules are derived from the observed economic behaviour. The non-linear equations are solved numerically for a model economy. Numerical solutions for simple model economies suggest that the some of the results of general equilibrium economics are consequences only of the equilibrium hypothesis. We show that perfect competition of selfish agents does not guarantee the stability of economic equilibrium, but cooperativity is needed, too.
Response reactions: equilibrium coupling.
Hoffmann, Eufrozina A; Nagypal, Istvan
2006-06-01
It is pointed out and illustrated in the present paper that if a homogeneous multiple equilibrium system containing k components and q species is composed of the reactants actually taken and their reactions contain only k + 1 species, then we have a unique representation with (q - k) stoichiometrically independent reactions (SIRs). We define these as coupling reactions. All the other possible combinations with k + 1 species are the coupled reactions that are in equilibrium when the (q - k) SIRs are in equilibrium. The response of the equilibrium state for perturbation is determined by the coupling and coupled equilibria. Depending on the circumstances and the actual thermodynamic data, the effect of coupled equilibria may overtake the effect of the coupling ones, leading to phenomena that are in apparent contradiction with Le Chatelier's principle.
Laboratory Building for Accurate Determination of Plutonium
Institute of Scientific and Technical Information of China (English)
2008-01-01
<正>The accurate determination of plutonium is one of the most important assay techniques of nuclear fuel, also the key of the chemical measurement transfer and the base of the nuclear material balance. An
On the importance of having accurate data for astrophysical modelling
Lique, Francois
2016-06-01
The Herschel telescope and the ALMA and NOEMA interferometers have opened new windows of observation for wavelengths ranging from far infrared to sub-millimeter with spatial and spectral resolutions previously unmatched. To make the most of these observations, an accurate knowledge of the physical and chemical processes occurring in the interstellar and circumstellar media is essential.In this presentation, I will discuss what are the current needs of astrophysics in terms of molecular data and I will show that accurate molecular data are crucial for the proper determination of the physical conditions in molecular clouds.First, I will focus on collisional excitation studies that are needed for molecular lines modelling beyond the Local Thermodynamic Equilibrium (LTE) approach. In particular, I will show how new collisional data for the HCN and HNC isomers, two tracers of star forming conditions, have allowed solving the problem of their respective abundance in cold molecular clouds. I will also present the last collisional data that have been computed in order to analyse new highly resolved observations provided by the ALMA interferometer.Then, I will present the calculation of accurate rate constants for the F+H2 → HF+H and Cl+H2 ↔ HCl+H reactions, which have allowed a more accurate determination of the physical conditions in diffuse molecular clouds. I will also present the recent work on the ortho-para-H2 conversion due to hydrogen exchange that allow more accurate determination of the ortho-to-para-H2 ratio in the universe and that imply a significant revision of the cooling mechanism in astrophysical media.
Group Contribution Methods for Phase Equilibrium Calculations.
Gmehling, Jürgen; Constantinescu, Dana; Schmid, Bastian
2015-01-01
The development and design of chemical processes are carried out by solving the balance equations of a mathematical model for sections of or the whole chemical plant with the help of process simulators. For process simulation, besides kinetic data for the chemical reaction, various pure component and mixture properties are required. Because of the great importance of separation processes for a chemical plant in particular, a reliable knowledge of the phase equilibrium behavior is required. The phase equilibrium behavior can be calculated with the help of modern equations of state or g(E)-models using only binary parameters. But unfortunately, only a very small part of the experimental data for fitting the required binary model parameters is available, so very often these models cannot be applied directly. To solve this problem, powerful predictive thermodynamic models have been developed. Group contribution methods allow the prediction of the required phase equilibrium data using only a limited number of group interaction parameters. A prerequisite for fitting the required group interaction parameters is a comprehensive database. That is why for the development of powerful group contribution methods almost all published pure component properties, phase equilibrium data, excess properties, etc., were stored in computerized form in the Dortmund Data Bank. In this review, the present status, weaknesses, advantages and disadvantages, possible applications, and typical results of the different group contribution methods for the calculation of phase equilibria are presented.
Li, Angsheng; Zhang, Xiaohui; Pan, Yicheng; Peng, Pan
2014-12-01
It seems a universal phenomenon of networks that the attacks on a small number of nodes by an adversary player Alice may generate a global cascading failure of the networks. It has been shown (Li et al., 2013) that classic scale-free networks (Barabási and Albert, 1999, Barabási, 2009) are insecure against attacks of as small as O(logn) many nodes. This poses a natural and fundamental question: Can we introduce a second player Bob to prevent Alice from global cascading failure of the networks? We proposed a game in networks. We say that a network has an equilibrium game if the second player Bob has a strategy to balance the cascading influence of attacks by the adversary player Alice. It was shown that networks of the preferential attachment model (Barabási and Albert, 1999) fail to have equilibrium games, that random graphs of the Erdös-Rényi model (Erdös and Rényi, 1959, Erdös and Rényi, 1960) have, for which randomness is the mechanism, and that homophyly networks (Li et al., 2013) have equilibrium games, for which homophyly and preferential attachment are the underlying mechanisms. We found that some real networks have equilibrium games, but most real networks fail to have. We anticipate that our results lead to an interesting new direction of network theory, that is, equilibrium games in networks.
Hamilton, H. Harris, II; Millman, Daniel R.; Greendyke, Robert B.
1992-01-01
A computer code was developed that uses an implicit finite-difference technique to solve nonsimilar, axisymmetric boundary layer equations for both laminar and turbulent flow. The code can treat ideal gases, air in chemical equilibrium, and carbon tetrafluoride (CF4), which is a useful gas for hypersonic blunt-body simulations. This is the only known boundary layer code that can treat CF4. Comparisons with experimental data have demonstrated that accurate solutions are obtained. The method should prove useful as an analysis tool for comparing calculations with wind tunnel experiments and for making calculations about flight vehicles where equilibrium air chemistry assumptions are valid.
Energy Technology Data Exchange (ETDEWEB)
Barragan R, Rosa Maria; Arellano G, Victor M.; Portugal M, Enrique; Torres R, Vicente [Instituto de Investigaciones Electricas (Mexico); Torres Alvarado, Ignacio [Universidad Nacional Autonoma de Mexico (Mexico); Ascencio C, Fernando; Martinez A; Ana E [Petroleos Mexicanos (Mexico)
2001-09-01
Chemical equilibrium of formation waters from seven oil wells of the Activo Luna field (Tabasco, Mexico) was modelled. Saturation indices of characteristic hydrothermal minerals were calculated at ambient and reservoir conditions in order to predict scaling potential of deep and surface installations. The salinity of waters was found to be in the range from 43,000 (well Escuintle 2) to 250,000 (well Lune 3B) mg/kg as total dissolved solids. The water samples were classified as sodium-chioride type. Ionic strength for the solutions was found to be between 0.75 and 6.5. Activity coefficients were estimated by virial (Pitzer equations) methods using the GEOCHEMIST WORKENCH (GWB) software. Minerals such as anhydrite, halite, alunite, fluorite and barite were found to be supersaturated at reservoir conditions. A solid scale sample obtained from well Luna-3B was analysed. Analysis indicate the presence of calcite, anhydrite, fluorite and sphalerite which suggest the occurrence of temperatures of at least 180 Celcius degrees with acidic conditions and high chemical corrosion potential. [Spanish] Se modelo el equilibrio quimico de aguas de formacion producidas por siete pozos petroleros pertenecientes al Activo Luna, en el estado de Tabasco, Mexico, se calcularon los indices de saturacion de minerales caracteristicos tanto en las condiciones ambiente como en las de yacimiento, con el proposito de apoyar el control de incrustaciones en las instalaciones superficiales y profundas. La salinidad de las salmueras se encontro en el rango de 43,000 (pozos Escuintle 2) a 250,000 (pozos Luna 3B) mg/kg de solidos disueltos totales y las muestras se clasificaron como del tipo clorurado-sodico. La fuerza ionica de las soluciones varia entre 0.75 y 6.5 molar, por lo que los coeficientes de actividad de la modelacion de equilibrio quimico se estimaron por metodos viriales empleando las ecuaciones de Pitzer mediante el programa GEOCHEMIST WORKBENCH (GWB). Minerales como anhidrita, halita
Non-Equilibrium Thermodynamics in Conformal Field Theory
Hollands, Stephan
2016-01-01
We present a model independent, operator algebraic approach to non-equilibrium quantum thermodynamics within the framework of two-dimensional Conformal Field Theory. Two infinite reservoirs in equilibrium at their own temperatures and chemical potentials are put in contact through a defect line, possibly by inserting a probe. As time evolves, the composite system then approaches a non-equilibrium steady state that we describe. In particular, we re-obtain recent formulas of Bernard and Doyon.
Wall ablation of heated compound-materials into non-equilibrium discharge plasmas
Wang, Weizong; Kong, Linghan; Geng, Jinyue; Wei, Fuzhi; Xia, Guangqing
2017-02-01
The discharge properties of the plasma bulk flow near the surface of heated compound-materials strongly affects the kinetic layer parameters modeled and manifested in the Knudsen layer. This paper extends the widely used two-layer kinetic ablation model to the ablation controlled non-equilibrium discharge due to the fact that the local thermodynamic equilibrium (LTE) approximation is often violated as a result of the interaction between the plasma and solid walls. Modifications to the governing set of equations, to account for this effect, are derived and presented by assuming that the temperature of the electrons deviates from that of the heavy particles. The ablation characteristics of one typical material, polytetrafluoroethylene (PTFE) are calculated with this improved model. The internal degrees of freedom as well as the average particle mass and specific heat ratio of the polyatomic vapor, which strongly depends on the temperature, pressure and plasma non-equilibrium degree and plays a crucial role in the accurate determination of the ablation behavior by this model, are also taken into account. Our assessment showed the significance of including such modifications related to the non-equilibrium effect in the study of vaporization of heated compound materials in ablation controlled arcs. Additionally, a two-temperature magneto-hydrodynamic (MHD) model accounting for the thermal non-equilibrium occurring near the wall surface is developed and applied into an ablation-dominated discharge for an electro-thermal chemical launch device. Special attention is paid to the interaction between the non-equilibrium plasma and the solid propellant surface. Both the mass exchange process caused by the wall ablation and plasma species deposition as well as the associated momentum and energy exchange processes are taken into account. A detailed comparison of the results of the non-equilibrium model with those of an equilibrium model is presented. The non-equilibrium results
Eberl, Gérard
2016-08-01
The classical model of immunity posits that the immune system reacts to pathogens and injury and restores homeostasis. Indeed, a century of research has uncovered the means and mechanisms by which the immune system recognizes danger and regulates its own activity. However, this classical model does not fully explain complex phenomena, such as tolerance, allergy, the increased prevalence of inflammatory pathologies in industrialized nations and immunity to multiple infections. In this Essay, I propose a model of immunity that is based on equilibrium, in which the healthy immune system is always active and in a state of dynamic equilibrium between antagonistic types of response. This equilibrium is regulated both by the internal milieu and by the microbial environment. As a result, alteration of the internal milieu or microbial environment leads to immune disequilibrium, which determines tolerance, protective immunity and inflammatory pathology.
Energy Technology Data Exchange (ETDEWEB)
Neuman, M.W.
1982-01-01
The conundrum of blood undersaturation with respect to bone mineralization and its supersaturation with respect to bone's homeostatic function has acquired a new equation. On the supply side, Ca/sup 2 +/ is pumped in across bone cells to provide the needed Ca/sup 2 +/ x P/sub i/ for brushite precipitation. On the demand side, blood is in equilibrium with bone fluid, which is in equilibrium with a mineral more soluble than apatite. The function of potassium in this equation is yet to be found.
Statistical fluctuations and correlations in hadronic equilibrium systems
Energy Technology Data Exchange (ETDEWEB)
Hauer, Michael
2010-06-17
This thesis is dedicated to the study of fluctuation and correlation observables of hadronic equilibrium systems. The statistical hadronization model of high energy physics, in its ideal, i.e. non-interacting, gas approximation is investigated in different ensemble formulations. The hypothesis of thermal and chemical equilibrium in high energy interaction is tested against qualitative and quantitative predictions. (orig.)
Shikata, Toshiyuki; Minakawa, Ayako; Okuyama, Kenji
2009-10-29
The structure, dynamics, and hydration behavior of a collagen model polypeptide, (L-prolyl-L-prolylglycyl)(10) (PPG10), were investigated in pure water and dilute acetic acid over a wide temperature range using broadband dielectric relaxation (DR) techniques that spanned frequencies from 1 kHz to 20 GHz. All samples showed pronounced dielectric dispersion with two major relaxation processes around 3 MHz and 20 GHz. Because DR measurements sensitively probe dipoles and their dynamics, the structures and ionization states of the carboxy and amino termini of aqueous PPG10 were precisely determined from the relaxation times and strengths in the 3 MHz frequency range. In solution, PPG10 formed mixtures of monodisperse rods as triple helices with lengths and diameters of 8.6 and 1.5 nm, respectively, and monomeric random coils with radii of approximately 1.4 nm. Ionization of the C-terminus was suppressed by the addition of acetic acid in both states. The fraction of random coils (f(coil)) was found to be a function of temperature (T) and the concentration of PPG10 (c). At low temperatures, small f(coil) values were found, which increased with temperature to reach f(coil) = 1 at approximately 60 degrees C, irrespective of c. This phenomenon, well-known as a triple helix-to-single coil transition, is discussed on the basis of the chemical reaction, (PPG10)(3) 3PPG10, with an equilibrium constant of K = 3(c/55.6)(2)f(coil)(3)(1 - f(coil))(-1). The standard enthalpy change evaluated from Arrhenius plots (ln K versus T(-1)) was found to change dramatically at the same transition temperature that was previously determined by using optical rotation experiments. The other major DR process, observed at approximately 20 GHz, was assigned to free and hydrated water molecules and used to determine the average hydration number (m) per PPG10. The m values for the triple helix and random coil state at 25 degrees C were evaluated to be m(th) = 60-70 and m(coil) = 250-270. The m
Mesoscopic thermodynamics of stationary non-equilibrium states
Energy Technology Data Exchange (ETDEWEB)
SantamarIa-Holek, I [Facultad de Ciencias, Universidad Nacional Autonoma de Mexico, Circuito exterior de Ciudad Universitaria, 04510 DF (Mexico); RubI, J M [Facultad de FIsica, Universitat de Barcelona, Av. Diagonal 647, 08028, Barcelona (Spain); Perez-Madrid, A [Facultad de FIsica, Universitat de Barcelona, Av. Diagonal 647, 08028, Barcelona (Spain)
2005-01-01
Thermodynamics for systems at non-equilibrium stationary states have been formulated, based on the assumption of the existence of a local equilibrium in phase space which enables one to interpret the probability density and its conjugated non-equilibrium chemical potential as mesoscopic thermodynamic variables. The probability current is obtained from the entropy production related to the probability diffusion process and leads to the formulation of the Fokker-Planck equation. For the case of a gas of Brownian particles under steady flow in the dilute and concentrated regimes, we derive non-equilibrium equations of state.
Non-equilibrium quantum heat machines
Alicki, Robert; Gelbwaser-Klimovsky, David
2015-11-01
Standard heat machines (engine, heat pump, refrigerator) are composed of a system (working fluid) coupled to at least two equilibrium baths at different temperatures and periodically driven by an external device (piston or rotor) sometimes called the work reservoir. The aim of this paper is to go beyond this scheme by considering environments which are stationary but cannot be decomposed into a few baths at thermal equilibrium. Such situations are important, for example in solar cells, chemical machines in biology, various realizations of laser cooling or nanoscopic machines driven by laser radiation. We classify non-equilibrium baths depending on their thermodynamic behavior and show that the efficiency of heat machines powered by them is limited by the generalized Carnot bound.
Non-Equilibrium Thermodynamics in Multiphase Flows
Mauri, Roberto
2013-01-01
Non-equilibrium thermodynamics is a general framework that allows the macroscopic description of irreversible processes. This book introduces non-equilibrium thermodynamics and its applications to the rheology of multiphase flows. The subject is relevant to graduate students in chemical and mechanical engineering, physics and material science. This book is divided into two parts. The first part presents the theory of non-equilibrium thermodynamics, reviewing its essential features and showing, when possible, some applications. The second part of this book deals with how the general theory can be applied to model multiphase flows and, in particular, how to determine their constitutive relations. Each chapter contains problems at the end, the solutions of which are given at the end of the book. No prior knowledge of statistical mechanics is required; the necessary prerequisites are elements of transport phenomena and on thermodynamics. “The style of the book is mathematical, but nonetheless it remains very re...
Problems in equilibrium theory
Aliprantis, Charalambos D
1996-01-01
In studying General Equilibrium Theory the student must master first the theory and then apply it to solve problems. At the graduate level there is no book devoted exclusively to teaching problem solving. This book teaches for the first time the basic methods of proof and problem solving in General Equilibrium Theory. The problems cover the entire spectrum of difficulty; some are routine, some require a good grasp of the material involved, and some are exceptionally challenging. The book presents complete solutions to two hundred problems. In searching for the basic required techniques, the student will find a wealth of new material incorporated into the solutions. The student is challenged to produce solutions which are different from the ones presented in the book.
Bounded Computational Capacity Equilibrium
Hernandez, Penelope
2010-01-01
We study repeated games played by players with bounded computational power, where, in contrast to Abreu and Rubisntein (1988), the memory is costly. We prove a folk theorem: the limit set of equilibrium payoffs in mixed strategies, as the cost of memory goes to 0, includes the set of feasible and individually rational payoffs. This result stands in sharp contrast to Abreu and Rubisntein (1988), who proved that when memory is free, the set of equilibrium payoffs in repeated games played by players with bounded computational power is a strict subset of the set of feasible and individually rational payoffs. Our result emphasizes the role of memory cost and of mixing when players have bounded computational power.
General Search Market Equilibrium
Albrecht, James W.; Axell, Bo
1982-01-01
In this paper we extend models of “search market equilibrium” to incorporate general equilibrium considerations. The model we treat is one with a single product market and a single labor market. Imperfectly informed individuals follow optimal strategies in searching for a suitably low price and high wage. For any distribution of price and wage offers across firms these optimal strategies generate product demand and labor supply schedules. Firms then choose prices and wages to maximize expecte...
Equilibrium statistical mechanics
Jackson, E Atlee
2000-01-01
Ideal as an elementary introduction to equilibrium statistical mechanics, this volume covers both classical and quantum methodology for open and closed systems. Introductory chapters familiarize readers with probability and microscopic models of systems, while additional chapters describe the general derivation of the fundamental statistical mechanics relationships. The final chapter contains 16 sections, each dealing with a different application, ordered according to complexity, from classical through degenerate quantum statistical mechanics. Key features include an elementary introduction t
DEFF Research Database (Denmark)
Bollerslev, Tim; Sizova, Natalia; Tauchen, George
Stock market volatility clusters in time, carries a risk premium, is fractionally inte- grated, and exhibits asymmetric leverage effects relative to returns. This paper develops a first internally consistent equilibrium based explanation for these longstanding empirical facts. The model is cast......, and the dynamic cross-correlations of the volatility measures with the returns calculated from actual high-frequency intra-day data on the S&P 500 aggregate market and VIX volatility indexes....
Tourism Equilibrium Price Trends
Directory of Open Access Journals (Sweden)
Mohammad Mohebi
2012-01-01
Full Text Available Problem statement: A review of the tourism history shows that tourism as an industry was virtually unknown in Malaysia until the late 1960s. Since then, it has developed and grown into a major industry, making an important contribution to the country's economy. By allocating substantial funds to the promotion of tourism and the provision of the necessary infrastructure, the government has played an important role in the impressive progress of the Malaysian tourism industry. One of the important factors which can attract tourists to Malaysia is the tourism price. Has the price of tourism decreased? To answer this question, it is necessary to obtain the equilibrium prices as well as the yearly trend for Malaysia during the sample period as it will be useful for analysis of the infrastructure situation of the tourism industry in this country. The purpose of the study is to identify equilibrium tourism price trends in Malaysian tourism market. Approach: We use hotel room as representative of tourism market. Quarterly data from 1995-2009 are used and a dynamic model of simultaneous equation is employed. Results: Based on the result during the period of 1995 until 2000, the growth rate of the equilibrium price was greater than consumer price index and producer price index. Conclusion: In the Malaysian tourism market, new infrastructure during this period had not been developed to keep pace with tourist arrivals.
Program Helps To Determine Chemical-Reaction Mechanisms
Bittker, D. A.; Radhakrishnan, K.
1995-01-01
General Chemical Kinetics and Sensitivity Analysis (LSENS) computer code developed for use in solving complex, homogeneous, gas-phase, chemical-kinetics problems. Provides for efficient and accurate chemical-kinetics computations and provides for sensitivity analysis for variety of problems, including problems involving honisothermal conditions. Incorporates mathematical models for static system, steady one-dimensional inviscid flow, reaction behind incident shock wave (with boundary-layer correction), and perfectly stirred reactor. Computations of equilibrium properties performed for following assigned states: enthalpy and pressure, temperature and pressure, internal energy and volume, and temperature and volume. Written in FORTRAN 77 with exception of NAMELIST extensions used for input.
On equilibrium structures of the water molecule
Császár, Attila G.; Czakó, Gábor; Furtenbacher, Tibor; Tennyson, Jonathan; Szalay, Viktor; Shirin, Sergei V.; Zobov, Nikolai F.; Polyansky, Oleg L.
2005-06-01
Equilibrium structures are fundamental entities in molecular sciences. They can be inferred from experimental data by complicated inverse procedures which often rely on several assumptions, including the Born-Oppenheimer approximation. Theory provides a direct route to equilibrium geometries. A recent high-quality ab initio semiglobal adiabatic potential-energy surface (PES) of the electronic ground state of water, reported by Polyansky et al. [Polyansky et al.Science 299, 539 (2003)] and called CVRQD here, is analyzed in this respect. The equilibrium geometries resulting from this direct route are deemed to be of higher accuracy than those that can be determined by analyzing experimental data. Detailed investigation of the effect of the breakdown of the Born-Oppenheimer approximation suggests that the concept of an isotope-independent equilibrium structure holds to about 3×10-5Å and 0.02° for water. The mass-independent [Born-Oppenheimer (BO)] equilibrium bond length and bond angle on the ground electronic state PES of water is reBO=0.95782Å and θeBO=104.485°, respectively. The related mass-dependent (adiabatic) equilibrium bond length and bond angle of H2O16 is read=0.95785Å and θead=104.500°, respectively, while those of D2O16 are read=0.95783Å and θead=104.490°. Pure ab initio prediction of J =1 and 2 rotational levels on the vibrational ground state by the CVRQD PESs is accurate to better than 0.002cm-1 for all isotopologs of water considered. Elaborate adjustment of the CVRQD PESs to reproduce all observed rovibrational transitions to better than 0.05cm-1 (or the lower ones to better than 0.0035cm-1) does not result in noticeable changes in the adiabatic equilibrium structure parameters. The expectation values of the ground vibrational state rotational constants of the water isotopologs, computed in the Eckart frame using the CVRQD PESs and atomic masses, deviate from the experimentally measured ones only marginally, especially for A0 and B0. The
The Rate-Controlled Constrained-Equilibrium Approach to Far-From-Local-Equilibrium Thermodynamics
Directory of Open Access Journals (Sweden)
Hameed Metghalchi
2012-01-01
Full Text Available The Rate-Controlled Constrained-Equilibrium (RCCE method for the description of the time-dependent behavior of dynamical systems in non-equilibrium states is a general, effective, physically based method for model order reduction that was originally developed in the framework of thermodynamics and chemical kinetics. A generalized mathematical formulation is presented here that allows including nonlinear constraints in non-local equilibrium systems characterized by the existence of a non-increasing Lyapunov functional under the system’s internal dynamics. The generalized formulation of RCCE enables to clarify the essentials of the method and the built-in general feature of thermodynamic consistency in the chemical kinetics context. In this paper, we work out the details of the method in a generalized mathematical-physics framework, but for definiteness we detail its well-known implementation in the traditional chemical kinetics framework. We detail proofs and spell out explicit functional dependences so as to bring out and clarify each underlying assumption of the method. In the standard context of chemical kinetics of ideal gas mixtures, we discuss the relations between the validity of the detailed balance condition off-equilibrium and the thermodynamic consistency of the method. We also discuss two examples of RCCE gas-phase combustion calculations to emphasize the constraint-dependent performance of the RCCE method.
Noncompact Equilibrium Points and Applications
Directory of Open Access Journals (Sweden)
Zahra Al-Rumaih
2012-01-01
Full Text Available We prove an equilibrium existence result for vector functions defined on noncompact domain and we give some applications in optimization and Nash equilibrium in noncooperative game.
Power conversion efficiency of non-equilibrium light absorption
Directory of Open Access Journals (Sweden)
I. Santamaría-Holek
2017-04-01
Full Text Available We deduce a novel expression for the non-equilibrium photochemical potential and the power conversion efficiency of non-equilibrium light absorption by a thermostated material. Application of our results for the case of electron migration from valence to conduction bands in photovoltaic cells allows us to accurately interpolate experimental results for the maximal efficiencies of Ge-, Si-, GaAs-based cells and the like.
Extended Mixed Vector Equilibrium Problems
Directory of Open Access Journals (Sweden)
Mijanur Rahaman
2014-01-01
Full Text Available We study extended mixed vector equilibrium problems, namely, extended weak mixed vector equilibrium problem and extended strong mixed vector equilibrium problem in Hausdorff topological vector spaces. Using generalized KKM-Fan theorem (Ben-El-Mechaiekh et al.; 2005, some existence results for both problems are proved in noncompact domain.
Non-equilibrium thermodynamics
De Groot, Sybren Ruurds
1984-01-01
The study of thermodynamics is especially timely today, as its concepts are being applied to problems in biology, biochemistry, electrochemistry, and engineering. This book treats irreversible processes and phenomena - non-equilibrium thermodynamics.S. R. de Groot and P. Mazur, Professors of Theoretical Physics, present a comprehensive and insightful survey of the foundations of the field, providing the only complete discussion of the fluctuating linear theory of irreversible thermodynamics. The application covers a wide range of topics: the theory of diffusion and heat conduction, fluid dyn
Speaking Fluently And Accurately
Institute of Scientific and Technical Information of China (English)
JosephDeVeto
2004-01-01
Even after many years of study,students make frequent mistakes in English. In addition, many students still need a long time to think of what they want to say. For some reason, in spite of all the studying, students are still not quite fluent.When I teach, I use one technique that helps students not only speak more accurately, but also more fluently. That technique is dictations.
Maia, Alex S C; Nascimento, Sheila T; Nascimento, Carolina C N; Gebremedhin, Kifle G
2016-05-01
The effects of air temperature and relative humidity on thermal equilibrium of goats in a tropical region was evaluated. Nine non-pregnant Anglo Nubian nanny goats were used in the study. An indirect calorimeter was designed and developed to measure oxygen consumption, carbon dioxide production, methane production and water vapour pressure of the air exhaled from goats. Physiological parameters: rectal temperature, skin temperature, hair-coat temperature, expired air temperature and respiratory rate and volume as well as environmental parameters: air temperature, relative humidity and mean radiant temperature were measured. The results show that respiratory and volume rates and latent heat loss did not change significantly for air temperature between 22 and 26°C. In this temperature range, metabolic heat was lost mainly by convection and long-wave radiation. For temperature greater than 30°C, the goats maintained thermal equilibrium mainly by evaporative heat loss. At the higher air temperature, the respiratory and ventilation rates as well as body temperatures were significantly elevated. It can be concluded that for Anglo Nubian goats, the upper limit of air temperature for comfort is around 26°C when the goats are protected from direct solar radiation.
Components in Chemical Thermodynamics
Alberty, Robert A.
1995-09-01
Chemical equations are actually matrix equations, and this has important implications for their thermodynamic treatment. The fundamental equation for chemical thermodynamics for a chemical reaction system can be written in terms of species, but at chemical equilibrium, it has to be written in terms of components. The number of components is equal to the number of species minus the number of independent chemical reactions. The fundamental equation for the Gibbs energy of a system containing ethylene, methane, ethane, and propane is discussed. At chemical equilibrium there are two components, which can be taken to be carbon and hydrogen or ethylene and methane. There are advantages in using matrix notation.
Abrupt PN junctions: Analytical solutions under equilibrium and non-equilibrium
Khorasani, Sina
2016-08-01
We present an explicit solution of carrier and field distributions in abrupt PN junctions under equilibrium. An accurate logarithmic numerical method is implemented and results are compared to the analytical solutions. Analysis of results shows reasonable agreement with numerical solution as well as the depletion layer approximation. We discuss extensions to the asymmetric junctions. Approximate relations for differential capacitance C-V and current-voltage I-V characteristics are also found under non-zero external bias.
Non-equilibrium chemistry in the atmospheres of brown dwarfs
Saumon, D S; Freedman, R S; Lodders, K
2002-01-01
Carbon monoxide and ammonia have been detected in the spectrum of Gl 229B at abundances that differ substantially from those obtained from chemical equilibrium. Vertical mixing in the atmosphere is a mechanism that can drive slowly reacting species out of chemical equilibrium. We explore the effects of vertical mixing as a function of mixing efficiency and effective temperature on the chemical abundances in the atmospheres of brown dwarfs and on their spectra. The models compare favorably with the observational evidence and indicate that vertical mixing plays an important role in brown dwarf atmospheres.
Gallis, Michael A; Bond, Ryan B; Torczynski, John R
2009-09-28
Recently proposed molecular-level chemistry models that predict equilibrium and nonequilibrium reaction rates using only kinetic theory and fundamental molecular properties (i.e., no macroscopic reaction-rate information) are investigated for chemical reactions occurring in upper-atmosphere hypersonic flows. The new models are in good agreement with the measured Arrhenius rates for near-equilibrium conditions and with both measured rates and other theoretical models for far-from-equilibrium conditions. Additionally, the new models are applied to representative combustion and ionization reactions and are in good agreement with available measurements and theoretical models. Thus, molecular-level chemistry modeling provides an accurate method for predicting equilibrium and nonequilibrium chemical-reaction rates in gases.
Statistical physics ""Beyond equilibrium
Energy Technology Data Exchange (ETDEWEB)
Ecke, Robert E [Los Alamos National Laboratory
2009-01-01
The scientific challenges of the 21st century will increasingly involve competing interactions, geometric frustration, spatial and temporal intrinsic inhomogeneity, nanoscale structures, and interactions spanning many scales. We will focus on a broad class of emerging problems that will require new tools in non-equilibrium statistical physics and that will find application in new material functionality, in predicting complex spatial dynamics, and in understanding novel states of matter. Our work will encompass materials under extreme conditions involving elastic/plastic deformation, competing interactions, intrinsic inhomogeneity, frustration in condensed matter systems, scaling phenomena in disordered materials from glasses to granular matter, quantum chemistry applied to nano-scale materials, soft-matter materials, and spatio-temporal properties of both ordinary and complex fluids.
Exploring Equilibrium Chemistry for Hot Exoplanets
Blumenthal, Sarah; Harrington, Joseph; Mandell, Avi; Hébrard, Eric; Venot, Olivia; Cubillos, Patricio; Challener, Ryan
2015-11-01
It has been established that equilibrium chemistry is usually achieved deep in the atmosphere of hot Jovians where timescales are short (Line and Young 2013). Thus, equilibrium chemistry has been used as a starting point (setting initial conditions) for evaluating disequilibrium processes. We explore parameters of setting these initial conditions including departures from solar metallicity, the number of species allowed in a system, the types of species allowed in a system, and different thermodynamic libraries in an attempt to create a standard for evaluating equilibrium chemistry. NASA's open source code Chemical Equilibrium and Applications (CEA) is used to calculate model planet abundances by varying the metallicity, in the pressure regime of 0.1 to 1 bar. These results are compared to a variety of exoplanets (Teq between 600 and 2100K) qualitatively by color maps of the dayside with different temperature redistributions. Additionally, CEA (with an updated thermodynamic library) is validated with the thermochemical model presented in Venot et al. (2012) for HD 209458b and HD 189733b. This same analysis has then been extended to the cooler planet HD 97658b. Spectra are generated from both models’ abundances using the open source code transit (https://github.com/exosports/transit) using the opacities of 15 molecules. We make the updated CEA thermodyanamic library and supporting Python scripts to do the CEA analyses available open source. This work was supported by NASA Planetary Atmospheres grant NNX12AI69G.
Calculation of individual isotope equilibrium constants for geochemical reactions
Thorstenson, D.C.; Parkhurst, D.L.
2004-01-01
Theory is derived from the work of Urey (Urey H. C. [1947] The thermodynamic properties of isotopic substances. J. Chem. Soc. 562-581) to calculate equilibrium constants commonly used in geochemical equilibrium and reaction-transport models for reactions of individual isotopic species. Urey showed that equilibrium constants of isotope exchange reactions for molecules that contain two or more atoms of the same element in equivalent positions are related to isotope fractionation factors by ?? = (Kex)1/n, where n is the number of atoms exchanged. This relation is extended to include species containing multiple isotopes, for example 13C16O18O and 1H2H18O. The equilibrium constants of the isotope exchange reactions can be expressed as ratios of individual isotope equilibrium constants for geochemical reactions. Knowledge of the equilibrium constant for the dominant isotopic species can then be used to calculate the individual isotope equilibrium constants. Individual isotope equilibrium constants are calculated for the reaction CO2g = CO2aq for all species that can be formed from 12C, 13C, 16O, and 18O; for the reaction between 12C18 O2aq and 1H218Ol; and among the various 1H, 2H, 16O, and 18O species of H2O. This is a subset of a larger number of equilibrium constants calculated elsewhere (Thorstenson D. C. and Parkhurst D. L. [2002] Calculation of individual isotope equilibrium constants for implementation in geochemical models. Water-Resources Investigation Report 02-4172. U.S. Geological Survey). Activity coefficients, activity-concentration conventions for the isotopic variants of H2O in the solvent 1H216Ol, and salt effects on isotope fractionation have been included in the derivations. The effects of nonideality are small because of the chemical similarity of different isotopic species of the same molecule or ion. The temperature dependence of the individual isotope equilibrium constants can be calculated from the temperature dependence of the fractionation
Mean gas opacity for circumstellar environments and equilibrium temperature degeneracy
Malygin, M G; Klahr, H; Dullemond, C P; Henning, Th
2014-01-01
In a molecular cloud dust opacity typically dominates over gas opacity, yet in the vicinities of forming stars dust is depleted, and gas is the sole provider of opacity. In the optically thin circumstellar environments the radiation temperature cannot be assumed to be equal to the gas temperature, hence the two-temperature Planck means are necessary to calculate the radiative equilibrium. By using the two-temperature mean opacity one does obtain the proper equilibrium gas temperature in a circumstellar environment, which is in a chemical equilibrium. A careful consideration of a radiative transfer problem reveals that the equilibrium temperature solution can be degenerate in an optically thin gaseous environment. We compute mean gas opacities based on the publicly available code DFSYNTHE by Kurucz and Castelli. We performed the calculations assuming local thermodynamic equilibrium and an ideal gas equation of state. The values were derived by direct integration of the high-resolution opacity spectrum. We prod...
Non-Equilibrium Thermodynamics of Self-Replicating Protocells
DEFF Research Database (Denmark)
Fellermann, Harold; Corominas-Murtra, Bernat; Hansen, Per Lyngs
2017-01-01
We provide a non-equilibrium thermodynamic description of the life-cycle of a droplet based, chemically feasible, system of protocells. By coupling the protocells metabolic kinetics with its thermodynamics, we demonstrate how the system can be driven out of equilibrium to ensure protocell growth...... and replication. This coupling allows us to derive the equations of evolution and to rigorously demonstrate how growth and replication life-cycle can be understood as a non-equilibrium thermodynamic cycle. The process does not appeal to genetic information or inheritance, and is based only on non......-equilibrium physics considerations. Our non-equilibrium thermodynamic description of simple, yet realistic, processes of protocell growth and replication, represents an advance in our physical understanding of a central biological phenomenon both in connection to the origin of life and for modern biology....
General equilibrium without utility functions
DEFF Research Database (Denmark)
Balasko, Yves; Tvede, Mich
2010-01-01
How far can we go in weakening the assumptions of the general equilibrium model? Existence of equilibrium, structural stability and finiteness of equilibria of regular economies, genericity of regular economies and an index formula for the equilibria of regular economies have been known not to re......How far can we go in weakening the assumptions of the general equilibrium model? Existence of equilibrium, structural stability and finiteness of equilibria of regular economies, genericity of regular economies and an index formula for the equilibria of regular economies have been known...... and the diffeomorphism of the equilibrium manifold with a Euclidean space; (2) the diffeomorphism of the set of no-trade equilibria with a Euclidean space; (3) the openness and genericity of the set of regular equilibria as a subset of the equilibrium manifold; (4) for small trade vectors, the uniqueness, regularity...
Equilibrium models and variational inequalities
Konnov, Igor
2007-01-01
The concept of equilibrium plays a central role in various applied sciences, such as physics (especially, mechanics), economics, engineering, transportation, sociology, chemistry, biology and other fields. If one can formulate the equilibrium problem in the form of a mathematical model, solutions of the corresponding problem can be used for forecasting the future behavior of very complex systems and, also, for correcting the the current state of the system under control. This book presents a unifying look on different equilibrium concepts in economics, including several models from related sciences.- Presents a unifying look on different equilibrium concepts and also the present state of investigations in this field- Describes static and dynamic input-output models, Walras, Cassel-Wald, spatial price, auction market, oligopolistic equilibrium models, transportation and migration equilibrium models- Covers the basics of theory and solution methods both for the complementarity and variational inequality probl...
On the Local Equilibrium Principle
Hessling, H
2001-01-01
A physical system should be in a local equilibrium if it cannot be distinguished from a global equilibrium by ``infinitesimally localized measurements''. This seems to be a natural characterization of local equilibrium, however the problem is to give a precise meaning to the qualitative phrase ``infinitesimally localized measurements''. A solution is suggested in form of a {\\em Local Equilibrium Condition} (LEC) which can be applied to non-interacting quanta. The Unruh temperature of massless quanta is derived by applying LEC to an arbitrary point inside the Rindler Wedge. Massless quanta outside a hot sphere are analyzed. A stationary spherically symmetric local equilibrium does only exist according to LEC if the temperature is globally constant. Using LEC a non-trivial stationary local equilibrium is found for rotating massless quanta between two concentric cylinders of different temperatures. This shows that quanta may behave like a fluid with a B\\'enard instability.
Energy Technology Data Exchange (ETDEWEB)
Frederick, W.J. Jr.; Rudie, A.W.; Schmidl, G.W.; Sinquefield, S.A.; Rorrer, G.L.; Laver, M.L.; Yantasee, W.; Ming, D.
2000-08-01
The overall goal of this project was to develop fundamental, experimentally based methods for predicting the solubility or organic and inorganic matter and their interactions in recycled effluent from kraft pulp mills and bleach plants. This included: characterizing the capacity of wood pulp and dissolved organic matter to bind metal ions, developing a thermodynamic database of properties needed to describe the solubility of inorganic matter in pulp mill streams, incorporation of the database into equilibrium calculation software for predicting the solubility of the metals of interest, and evaluating its capability to predict the distribution of the metals between pulp fibers, inorganic precipitates, and solution.
Line radiative transfer and statistical equilibrium*
Directory of Open Access Journals (Sweden)
Kamp Inga
2015-01-01
Full Text Available Atomic and molecular line emission from protoplanetary disks contains key information of their detailed physical and chemical structures. To unravel those structures, we need to understand line radiative transfer in dusty media and the statistical equilibrium, especially of molecules. I describe here the basic principles of statistical equilibrium and illustrate them through the two-level atom. In a second part, the fundamentals of line radiative transfer are introduced along with the various broadening mechanisms. I explain general solution methods with their drawbacks and also specific difficulties encountered in solving the line radiative transfer equation in disks (e.g. velocity gradients. I am closing with a few special cases of line emission from disks: Radiative pumping, masers and resonance scattering.
Phillips, Rob
2015-03-01
It has been said that the cell is the test tube of the twenty-first century. If so, the theoretical tools needed to quantitatively and predictively describe what goes on in such test tubes lag sorely behind the stunning experimental advances in biology seen in the decades since the molecular biology revolution began. Perhaps surprisingly, one of the theoretical tools that has been used with great success on problems ranging from how cells communicate with their environment and each other to the nature of the organization of proteins and lipids within the cell membrane is statistical mechanics. A knee-jerk reaction to the use of statistical mechanics in the description of cellular processes is that living organisms are so far from equilibrium that one has no business even thinking about it. But such reactions are probably too hasty given that there are many regimes in which, because of a separation of timescales, for example, such an approach can be a useful first step. In this article, we explore the power of statistical mechanical thinking in the biological setting, with special emphasis on cell signaling and regulation. We show how such models are used to make predictions and describe some recent experiments designed to test them. We also consider the limits of such models based on the relative timescales of the processes of interest.
BIOACCESSIBILITY TESTS ACCURATELY ESTIMATE ...
Hazards of soil-borne Pb to wild birds may be more accurately quantified if the bioavailability of that Pb is known. To better understand the bioavailability of Pb to birds, we measured blood Pb concentrations in Japanese quail (Coturnix japonica) fed diets containing Pb-contaminated soils. Relative bioavailabilities were expressed by comparison with blood Pb concentrations in quail fed a Pb acetate reference diet. Diets containing soil from five Pb-contaminated Superfund sites had relative bioavailabilities from 33%-63%, with a mean of about 50%. Treatment of two of the soils with P significantly reduced the bioavailability of Pb. The bioaccessibility of the Pb in the test soils was then measured in six in vitro tests and regressed on bioavailability. They were: the “Relative Bioavailability Leaching Procedure” (RBALP) at pH 1.5, the same test conducted at pH 2.5, the “Ohio State University In vitro Gastrointestinal” method (OSU IVG), the “Urban Soil Bioaccessible Lead Test”, the modified “Physiologically Based Extraction Test” and the “Waterfowl Physiologically Based Extraction Test.” All regressions had positive slopes. Based on criteria of slope and coefficient of determination, the RBALP pH 2.5 and OSU IVG tests performed very well. Speciation by X-ray absorption spectroscopy demonstrated that, on average, most of the Pb in the sampled soils was sorbed to minerals (30%), bound to organic matter 24%, or present as Pb sulfate 18%. Ad
The polaron: Ground state, excited states, and far from equilibrium
Energy Technology Data Exchange (ETDEWEB)
Trugman, S.A. [Los Alamos National Lab., NM (United States). Theory Div.; Bonca, J. [Univ. of Ljubljana (Slovenia)]|[Jozef Stefan Inst., Ljubljana (Slovenia)
1998-12-01
The authors describe a variational approach for solving the Holstein polaron model with dynamical quantum phonons on an infinite lattice. The method is simple, fast, extremely accurate, and gives ground and excited state energies and wavefunctions at any momentum k. The method can also be used to calculate coherent quantum dynamics for inelastic tunneling and for strongly driven polarons far from equilibrium.
Fundamental functions in equilibrium thermodynamics
Horst, H.J. ter
1987-01-01
In the standard presentations of the principles of Gibbsian equilibrium thermodynamics one can find several gaps in the logic. For a subject that is as widely used as equilibrium thermodynamics, it is of interest to clear up such questions of mathematical rigor. In this paper it is shown that using
Rapid-Equilibrium Enzyme Kinetics
Alberty, Robert A.
2008-01-01
Rapid-equilibrium rate equations for enzyme-catalyzed reactions are especially useful because if experimental data can be fit by these simpler rate equations, the Michaelis constants can be interpreted as equilibrium constants. However, for some reactions it is necessary to use the more complicated steady-state rate equations. Thermodynamics is…
Elements of chemical thermodynamics
Nash, Leonard K
2005-01-01
This survey of purely thermal data in calculating the position of equilibrium in a chemical reaction highlights the physical content of thermodynamics, as distinct from purely mathematical aspects. 1970 edition.
Non-equilibrium phase transitions
Henkel, Malte; Lübeck, Sven
2009-01-01
This book describes two main classes of non-equilibrium phase-transitions: (a) static and dynamics of transitions into an absorbing state, and (b) dynamical scaling in far-from-equilibrium relaxation behaviour and ageing. The first volume begins with an introductory chapter which recalls the main concepts of phase-transitions, set for the convenience of the reader in an equilibrium context. The extension to non-equilibrium systems is made by using directed percolation as the main paradigm of absorbing phase transitions and in view of the richness of the known results an entire chapter is devoted to it, including a discussion of recent experimental results. Scaling theories and a large set of both numerical and analytical methods for the study of non-equilibrium phase transitions are thoroughly discussed. The techniques used for directed percolation are then extended to other universality classes and many important results on model parameters are provided for easy reference.
A Multiperiod Equilibrium Pricing Model
Directory of Open Access Journals (Sweden)
Minsuk Kwak
2014-01-01
Full Text Available We propose an equilibrium pricing model in a dynamic multiperiod stochastic framework with uncertain income. There are one tradable risky asset (stock/commodity, one nontradable underlying (temperature, and also a contingent claim (weather derivative written on the tradable risky asset and the nontradable underlying in the market. The price of the contingent claim is priced in equilibrium by optimal strategies of representative agent and market clearing condition. The risk preferences are of exponential type with a stochastic coefficient of risk aversion. Both subgame perfect strategy and naive strategy are considered and the corresponding equilibrium prices are derived. From the numerical result we examine how the equilibrium prices vary in response to changes in model parameters and highlight the importance of our equilibrium pricing principle.
Equilibrium with arbitrary market structure
DEFF Research Database (Denmark)
Grodal, Birgit; Vind, Karl
2005-01-01
Fifty years ago Arrow [1] introduced contingent commodities and Debreu [4] observed that this reinterpretation of a commodity was enough to apply the existing general equilibrium theory to uncertainty and time. This interpretation of general equilibrium theory is the Arrow-Debreu model. The compl......Fifty years ago Arrow [1] introduced contingent commodities and Debreu [4] observed that this reinterpretation of a commodity was enough to apply the existing general equilibrium theory to uncertainty and time. This interpretation of general equilibrium theory is the Arrow-Debreu model....... The complete market predicted by this theory is clearly unrealistic, and Radner [10] formulated and proved existence of equilibrium in a multiperiod model with incomplete markets. In this paper the Radner result is extended. Radner assumed a specific structure of markets, independence of preferences...
Groundwater recharge: Accurately representing evapotranspiration
CSIR Research Space (South Africa)
Bugan, Richard DH
2011-09-01
Full Text Available Groundwater recharge is the basis for accurate estimation of groundwater resources, for determining the modes of water allocation and groundwater resource susceptibility to climate change. Accurate estimations of groundwater recharge with models...
TEA: A Code Calculating Thermochemical Equilibrium Abundances
Blecic, Jasmina; Harrington, Joseph; Bowman, M. Oliver
2016-07-01
We present an open-source Thermochemical Equilibrium Abundances (TEA) code that calculates the abundances of gaseous molecular species. The code is based on the methodology of White et al. and Eriksson. It applies Gibbs free-energy minimization using an iterative, Lagrangian optimization scheme. Given elemental abundances, TEA calculates molecular abundances for a particular temperature and pressure or a list of temperature-pressure pairs. We tested the code against the method of Burrows & Sharp, the free thermochemical equilibrium code Chemical Equilibrium with Applications (CEA), and the example given by Burrows & Sharp. Using their thermodynamic data, TEA reproduces their final abundances, but with higher precision. We also applied the TEA abundance calculations to models of several hot-Jupiter exoplanets, producing expected results. TEA is written in Python in a modular format. There is a start guide, a user manual, and a code document in addition to this theory paper. TEA is available under a reproducible-research, open-source license via https://github.com/dzesmin/TEA.
Generalized Quantum Master Equations In and Out of Equilibrium: When Can One Win?
Kelly, Aaron; Wang, Lu; Markland, Thomas E
2016-01-01
Generalized quantum master equations (GQMEs) are an important tool in modeling chemical and physical processes. The central quantity in these approaches is the memory kernel, which encodes the effect of the projected dynamical degrees of freedom on the observable of interest. For a large number of problems it has been shown that exact and approximate methods can be made dramatically more efficient, and in the latter case more accurate, by proceeding via the GQME formalism. However, there are many situations where utilizing the GQME approach seems to offer no advantage over a direct evaluation of the property of interest. The development of a more detailed understanding of the conditions under which these methods will offer benefits would thus greatly enhance their utility. Here, we derive exact expressions for the memory kernel obtained from projection operators for systems both in and out of equilibrium, and show the conditions under which these expressions will be guaranteed to return an identical result to...
Local thermodynamic equilibrium for globally disequilibrium open systems under stress
Podladchikov, Yury
2016-04-01
Predictive modeling of far and near equilibrium processes is essential for understanding of patterns formation and for quantifying of natural processes that are never in global equilibrium. Methods of both equilibrium and non-equilibrium thermodynamics are needed and have to be combined. For example, predicting temperature evolution due to heat conduction requires simultaneous use of equilibrium relationship between internal energy and temperature via heat capacity (the caloric equation of state) and disequilibrium relationship between heat flux and temperature gradient. Similarly, modeling of rocks deforming under stress, reactions in system open for the porous fluid flow, or kinetic overstepping of the equilibrium reaction boundary necessarily needs both equilibrium and disequilibrium material properties measured under fundamentally different laboratory conditions. Classical irreversible thermodynamics (CIT) is the well-developed discipline providing the working recipes for the combined application of mutually exclusive experimental data such as density and chemical potential at rest under constant pressure and temperature and viscosity of the flow under stress. Several examples will be presented.
On Generalized Vector Equilibrium Problems
Institute of Scientific and Technical Information of China (English)
An-hua Wan; Jun-yi Fu; Wei-hua Mao
2006-01-01
A new generalized vector equilibrium problem involving set-valued mappings and the proper quasi-concavity of set-valued mappings in topological vector spaces are introduced; its existence theorems and the convexity of the solution sets are established.
Equilibrium and Orientation in Cephalopods.
Budelmann, Bernd-Ulrich
1980-01-01
Describes the structure of the equilibrium receptor system in cephalopods, comparing it to the vertebrate counterpart--the vestibular system. Relates the evolution of this complex system to the competition of cephalopods with fishes. (CS)
Equilibrium Electro-osmotic Instability
Rubinstein, Isaak
2014-01-01
Since its prediction fifteen years ago, electro-osmotic instability has been attributed to non-equilibrium electro-osmosis related to the extended space charge which develops at the limiting current in the course of concentration polarization at a charge-selective interface. This attribution had a double basis. Firstly, it has been recognized that equilibrium electro-osmosis cannot yield instability for a perfectly charge-selective solid. Secondly, it has been shown that non-equilibrium electro-osmosis can. First theoretical studies in which electro-osmotic instability was predicted and analyzed employed the assumption of perfect charge-selectivity for the sake of simplicity and so did the subsequent numerical studies of various time-dependent and nonlinear features of electro-osmotic instability. In this letter, we show that relaxing the assumption of perfect charge-selectivity (tantamount to fixing the electrochemical potential in the solid) allows for equilibrium electro-osmotic instability. Moreover, we s...
Balistrieri, L.S.; Blank, R.G.
2008-01-01
In order to evaluate thermodynamic speciation calculations inherent in biotic ligand models, the speciation of dissolved Cd, Cu, Pb, and Zn in aquatic systems influenced by historical mining activities is examined using equilibrium computer models and the diffusive gradients in thin films (DGT) technique. Several metal/organic-matter complexation models, including WHAM VI, NICA-Donnan, and Stockholm Humic model (SHM), are used in combination with inorganic speciation models to calculate the thermodynamic speciation of dissolved metals and concentrations of metal associated with biotic ligands (e.g., fish gills). Maximum dynamic metal concentrations, determined from total dissolved metal concentrations and thermodynamic speciation calculations, are compared with labile metal concentrations measured by DGT to assess which metal/organic-matter complexation model best describes metal speciation and, thereby, biotic ligand speciation, in the studied systems. Results indicate that the choice of model that defines metal/organic-matter interactions does not affect calculated concentrations of Cd and Zn associated with biotic ligands for geochemical conditions in the study area, whereas concentrations of Cu and Pb associated with biotic ligands depend on whether the speciation calculations use WHAM VI, NICA-Donnan, or SHM. Agreement between labile metal concentrations and dynamic metal concentrations occurs when WHAM VI is used to calculate Cu speciation and SHM is used to calculate Pb speciation. Additional work in systems that contain wide ranges in concentrations of multiple metals should incorporate analytical speciation methods, such as DGT, to constrain the speciation component of biotic ligand models. ?? 2008 Elsevier Ltd.
Directory of Open Access Journals (Sweden)
Gabriel J. Turbay
2011-03-01
Full Text Available The strategic equilibrium of an N-person cooperative game with transferable utility is a system composed of a cover collection of subsets of N and a set of extended imputations attainable through such equilibrium cover. The system describes a state of coalitional bargaining stability where every player has a bargaining alternative against any other player to support his corresponding equilibrium claim. Any coalition in the sable system may form and divide the characteristic value function of the coalition as prescribed by the equilibrium payoffs. If syndicates are allowed to form, a formed coalition may become a syndicate using the equilibrium payoffs as disagreement values in bargaining for a part of the complementary coalition incremental value to the grand coalition when formed. The emergent well known-constant sum derived game in partition function is described in terms of parameters that result from incumbent binding agreements. The strategic-equilibrium corresponding to the derived game gives an equal value claim to all players. This surprising result is alternatively explained in terms of strategic-equilibrium based possible outcomes by a sequence of bargaining stages that when the binding agreements are in the right sequential order, von Neumann and Morgenstern (vN-M non-discriminatory solutions emerge. In these solutions a preferred branch by a sufficient number of players is identified: the weaker players syndicate against the stronger player. This condition is referred to as the stronger player paradox. A strategic alternative available to the stronger players to overcome the anticipated not desirable results is to voluntarily lower his bargaining equilibrium claim. In doing the original strategic equilibrium is modified and vN-M discriminatory solutions may occur, but also a different stronger player may emerge that has eventually will have to lower his equilibrium claim. A sequence of such measures converges to the equal
Multicomponent Equilibrium Models for Testing Geothermometry Approaches
Energy Technology Data Exchange (ETDEWEB)
Carl D. Palmer; Robert W. Smith; Travis L. McLing
2013-02-01
Geothermometry is an important tool for estimating deep reservoir temperature from the geochemical composition of shallower and cooler waters. The underlying assumption of geothermometry is that the waters collected from shallow wells and seeps maintain a chemical signature that reflects equilibrium in the deeper reservoir. Many of the geothermometers used in practice are based on correlation between water temperatures and composition or using thermodynamic calculations based a subset (typically silica, cations or cation ratios) of the dissolved constituents. An alternative approach is to use complete water compositions and equilibrium geochemical modeling to calculate the degree of disequilibrium (saturation index) for large number of potential reservoir minerals as a function of temperature. We have constructed several “forward” geochemical models using The Geochemist’s Workbench to simulate the change in chemical composition of reservoir fluids as they migrate toward the surface. These models explicitly account for the formation (mass and composition) of a steam phase and equilibrium partitioning of volatile components (e.g., CO2, H2S, and H2) into the steam as a result of pressure decreases associated with upward fluid migration from depth. We use the synthetic data generated from these simulations to determine the advantages and limitations of various geothermometry and optimization approaches for estimating the likely conditions (e.g., temperature, pCO2) to which the water was exposed in the deep subsurface. We demonstrate the magnitude of errors that can result from boiling, loss of volatiles, and analytical error from sampling and instrumental analysis. The estimated reservoir temperatures for these scenarios are also compared to conventional geothermometers. These results can help improve estimation of geothermal resource temperature during exploration and early development.
Direct Statistical Simulation of Out-of-Equilibrium Jets
Tobias, Steven
2012-01-01
We present a Direct Statistical Simulation (DSS) of jet formation on a \\beta-plane, solving for the statistics of a fluid flow via an expansion in cumulants. Here we compare an expansion truncated at second order (CE2) to statistics accumulated by direct numerical simulations (DNS). We show that, for jets near equilibrium, CE2 is capable of reproducing the jet structure (although some differences remain in the second cumulant). However as the degree of departure from equilibrium is increased (as measured by the zonostrophy parameter) the jets meander more and CE2 becomes less accurate. We discuss a possible remedy by inclusion of higher cumulants.
Tovbin, Yu. K.
2006-10-01
The possibility of unified self-consistent calculations of equilibrium distributions of molecules in three states of aggregation within the framework of the lattice gas model is considered. The corresponding approach was generalized to arbitrary pressures with including the compressibility of lattice structures. Closed equations were obtained for calculating thermodynamic functions (including an equation for the chemical potential of mixture components) in the continuum quasi-chemical approximation. Their use ensures equally accurate calculations of interphase equilibria in gas-liquid-solid systems and the determination of the triple and critical points. Possibilities for simplifying the equations by passing to the effective pair interaction potential, which takes into account averaged vibrations and volume accessible to the translational motion of molecules of commensurate sizes, are considered.
Insights: Simple Models for Teaching Equilibrium and Le Chatelier's Principle.
Russell, Joan M.
1988-01-01
Presents three models that have been effective for teaching chemical equilibrium and Le Chatelier's principle: (1) the liquid transfer model, (2) the fish model, and (3) the teeter-totter model. Explains each model and its relation to Le Chatelier's principle. (MVL)
Thermodynamic Derivation of the Equilibrium Distribution Functions of Statistical Mechanics.
Stoeckly, Beth
1979-01-01
Presents a simplified derivation of the equilibrium distribution functions. The derivation proceeds from the change in the Helmholtz free energy when a particle is added to a system of fixed temperature, volume, and chemical potential. The derivations show the relationship between statistical mechanics and macroscopic thermodynamics. (Author/GA)
Spacecraft Sterilization Using Non-Equilibrium Atmospheric Pressure Plasma
Cooper, Moogega; Vaze, Nachiket; Anderson, Shawn; Fridman, Gregory; Vasilets, Victor N.; Gutsol, Alexander; Tsapin, Alexander; Fridman, Alexander
2007-01-01
As a solution to chemically and thermally destructive sterilization methods currently used for spacecraft, non-equilibrium atmospheric pressure plasmas are used to treat surfaces inoculated with Bacillus subtilis and Deinococcus radiodurans. Evidence of significant morphological changes and reduction in viability due to plasma exposure will be presented, including a 4-log reduction of B. subtilis after 2 minutes of dielectric barrier discharge treatment.
Computing Equilibrium Free Energies Using Non-Equilibrium Molecular Dynamics
Directory of Open Access Journals (Sweden)
Christoph Dellago
2013-12-01
Full Text Available As shown by Jarzynski, free energy differences between equilibrium states can be expressed in terms of the statistics of work carried out on a system during non-equilibrium transformations. This exact result, as well as the related Crooks fluctuation theorem, provide the basis for the computation of free energy differences from fast switching molecular dynamics simulations, in which an external parameter is changed at a finite rate, driving the system away from equilibrium. In this article, we first briefly review the Jarzynski identity and the Crooks fluctuation theorem and then survey various algorithms building on these relations. We pay particular attention to the statistical efficiency of these methods and discuss practical issues arising in their implementation and the analysis of the results.
Avula, Bharathi; Cohen, Pieter A; Wang, Yan-Hong; Sagi, Satyanarayanaraju; Feng, Wei; Wang, Mei; Zweigenbaum, Jerry; Shuangcheng, Ma; Khan, Ikhlas A
2014-11-01
Red yeast rice (RYR) is prepared by fermenting rice with various strains of the yeast Monascus spp of the Aspergillaceae family. Depending on the Monascus strains and the fermentation conditions, the products may contain monacolins, pigments and citrinin as secondary metabolites. Authentic and commercial RYR samples were analyzed using UHPLC-DAD-QToF-MS for monacolins, pigments and citrinin. A separation by UHPLC was achieved using a reversed-phase column and a gradient of water/acetonitrile each containing formic acid as the mobile phase. Accurate mass QToF spectrometry was used to distinguish isobaric monacolins. Principle component analysis (PCA), a chemometric technique was used to discriminate between authentic RYR, commercial RYR raw materials and dietary supplements. Three authentic RYR samples, 31 commercial RYR raw materials and 14 RYR dietary supplements were analyzed. Monacolin K content in 600mg of authentic RYR samples ranged from 1.2mg to 1.38mg. Amounts of monacolin K in dietary supplements labeled as containing 600mg of RYR varied more than 40-fold from 0.03mg to 2.18mg. Monacolin K content of dietary supplements labeled as containing 1200mg RYR varied more than 20-fold from 0.22mg to 5.23mg. In addition to large variations in quantity of monacolin K found in dietary supplements, RYR dietary supplements contained ratios of monacolins that differed significantly from authentic samples. The results indicated that RYR commercial products are of variable quality and the analytical method is suitable for quality control testing of a variety of RYR products. Copyright © 2014 Elsevier B.V. All rights reserved.
Equilibrium states of homogeneous sheared compressible turbulence
Riahi, M.; Lili, T.
2011-06-01
Equilibrium states of homogeneous compressible turbulence subjected to rapid shear is studied using rapid distortion theory (RDT). The purpose of this study is to determine the numerical solutions of unsteady linearized equations governing double correlations spectra evolution. In this work, RDT code developed by authors solves these equations for compressible homogeneous shear flows. Numerical integration of these equations is carried out using a second-order simple and accurate scheme. The two Mach numbers relevant to homogeneous shear flow are the turbulent Mach number Mt, given by the root mean square turbulent velocity fluctuations divided by the speed of sound, and the gradient Mach number Mg which is the mean shear rate times the transverse integral scale of the turbulence divided by the speed of sound. Validation of this code is performed by comparing RDT results with direct numerical simulation (DNS) of [A. Simone, G.N. Coleman, and C. Cambon, Fluid Mech. 330, 307 (1997)] and [S. Sarkar, J. Fluid Mech. 282, 163 (1995)] for various values of initial gradient Mach number Mg0. It was found that RDT is valid for small values of the non-dimensional times St (St 10) in particular for large values of Mg0. This essential feature justifies the resort to RDT in order to determine equilibrium states in the compressible regime.
Equilibrium states of homogeneous sheared compressible turbulence
Directory of Open Access Journals (Sweden)
M. Riahi
2011-06-01
Full Text Available Equilibrium states of homogeneous compressible turbulence subjected to rapid shear is studied using rapid distortion theory (RDT. The purpose of this study is to determine the numerical solutions of unsteady linearized equations governing double correlations spectra evolution. In this work, RDT code developed by authors solves these equations for compressible homogeneous shear flows. Numerical integration of these equations is carried out using a second-order simple and accurate scheme. The two Mach numbers relevant to homogeneous shear flow are the turbulent Mach number Mt, given by the root mean square turbulent velocity fluctuations divided by the speed of sound, and the gradient Mach number Mg which is the mean shear rate times the transverse integral scale of the turbulence divided by the speed of sound. Validation of this code is performed by comparing RDT results with direct numerical simulation (DNS of [A. Simone, G.N. Coleman, and C. Cambon, Fluid Mech. 330, 307 (1997] and [S. Sarkar, J. Fluid Mech. 282, 163 (1995] for various values of initial gradient Mach number Mg0. It was found that RDT is valid for small values of the non-dimensional times St (St 10 in particular for large values of Mg0. This essential feature justifies the resort to RDT in order to determine equilibrium states in the compressible regime.
Dynamic non-equilibrium wall-modeling for large eddy simulation at high Reynolds numbers
Kawai, Soshi; Larsson, Johan
2013-01-01
A dynamic non-equilibrium wall-model for large-eddy simulation at arbitrarily high Reynolds numbers is proposed and validated on equilibrium boundary layers and a non-equilibrium shock/boundary-layer interaction problem. The proposed method builds on the prior non-equilibrium wall-models of Balaras et al. [AIAA J. 34, 1111-1119 (1996)], 10.2514/3.13200 and Wang and Moin [Phys. Fluids 14, 2043-2051 (2002)], 10.1063/1.1476668: the failure of these wall-models to accurately predict the skin friction in equilibrium boundary layers is shown and analyzed, and an improved wall-model that solves this issue is proposed. The improvement stems directly from reasoning about how the turbulence length scale changes with wall distance in the inertial sublayer, the grid resolution, and the resolution-characteristics of numerical methods. The proposed model yields accurate resolved turbulence, both in terms of structure and statistics for both the equilibrium and non-equilibrium flows without the use of ad hoc corrections. Crucially, the model accurately predicts the skin friction, something that existing non-equilibrium wall-models fail to do robustly.
Modelling the chemical evolution in galaxies with KROME
Bovino, Stefano; Capelo, Pedro R; Schleicher, Dominik R G; Banerjee, R
2015-01-01
In this paper we present and test chemical models for three-dimensional hydrodynamical simulations of galaxy evolution. The microphysics is modelled by employing the public chemistry package KROME and the chemical networks have been tested to work in a wide range of densities and temperatures. We describe a simple H/He network following the formation of H2, and a more sophisticated network which includes metals. Photochemistry, thermal processes, and different prescriptions for the H2 catalysis on dust are presented and tested within a simple one-zone framework. We explore the effect of changing some of the key parameters such as metallicity, radiation and non-equilibrium versus equilibrium metal cooling approximations on the transition between the different gas phases. We find that employing an accurate treatment of the dust-related processes induces a faster HI-H2 transition. In addition, we show when the equilibrium assumption for metal cooling holds, and how a non-equilibrium approach affects the thermal ...
Accurate Method for Determining Adhesion of Cantilever Beams
Energy Technology Data Exchange (ETDEWEB)
Michalske, T.A.; de Boer, M.P.
1999-01-08
Using surface micromachined samples, we demonstrate the accurate measurement of cantilever beam adhesion by using test structures which are adhered over long attachment lengths. We show that this configuration has a deep energy well, such that a fracture equilibrium is easily reached. When compared to the commonly used method of determining the shortest attached beam, the present method is much less sensitive to variations in surface topography or to details of capillary drying.
GPEC, a real-time capable Tokamak equilibrium code
Rampp, Markus; Fischer, Rainer
2015-01-01
A new parallel equilibrium reconstruction code for tokamak plasmas is presented. GPEC allows to compute equilibrium flux distributions sufficiently accurate to derive parameters for plasma control within 1 ms of runtime which enables real-time applications at the ASDEX Upgrade experiment (AUG) and other machines with a control cycle of at least this size. The underlying algorithms are based on the well-established offline-analysis code CLISTE, following the classical concept of iteratively solving the Grad-Shafranov equation and feeding in diagnostic signals from the experiment. The new code adopts a hybrid parallelization scheme for computing the equilibrium flux distribution and extends the fast, shared-memory-parallel Poisson solver which we have described previously by a distributed computation of the individual Poisson problems corresponding to different basis functions. The code is based entirely on open-source software components and runs on standard server hardware and software environments. The real-...
Escape rate of active particles in the effective equilibrium approach
Sharma, A.; Wittmann, R.; Brader, J. M.
2017-01-01
The escape rate of a Brownian particle over a potential barrier is accurately described by the Kramers theory. A quantitative theory explicitly taking the activity of Brownian particles into account has been lacking due to the inherently out-of-equilibrium nature of these particles. Using an effective equilibrium approach [Farage et al., Phys. Rev. E 91, 042310 (2015), 10.1103/PhysRevE.91.042310] we study the escape rate of active particles over a potential barrier and compare our analytical results with data from direct numerical simulation of the colored noise Langevin equation. The effective equilibrium approach generates an effective potential that, when used as input to Kramers rate theory, provides results in excellent agreement with the simulation data.
Physicochemical Perturbations of Phase Equilibriums
Dobruskin, Vladimir Kh
2010-01-01
The alternative approach to the displacement of gas/liquid equilibrium is developed on the basis of the Clapeyron equation. The phase transition in the system with well-established properties is taken as a reference process to search for the parameters of phase transition in the perturbed equilibrium system. The main equation, derived in the framework of both classical thermodynamics and statistical mechanics, establishes a correlation between variations of enthalpies of evaporation, \\Delta (\\Delta H), which is induced by perturbations, and the equilibrium vapor pressures. The dissolution of a solute, changing the surface shape, and the effect of the external field of adsorbents are considered as the perturbing actions on the liquid phase. The model provides the unified method for studying (1) solutions, (2) membrane separations (3) surface phenomena, and (4) effect of the adsorption field; it leads to the useful relations between \\Delta (\\Delta H), on the one hand, and the osmotic pressures, the Donnan poten...
General equilibrium of an ecosystem.
Tschirhart, J
2000-03-07
Ecosystems and economies are inextricably linked: ecosystem models and economic models are not linked. Consequently, using either type of model to design policies for preserving ecosystems or improving economic performance omits important information. Improved policies would follow from a model that links the systems and accounts for the mutual feedbacks by recognizing how key ecosystem variables influence key economic variables, and vice versa. Because general equilibrium economic models already are widely used for policy making, the approach used here is to develop a general equilibrium ecosystem model which captures salient biological functions and which can be integrated with extant economic models. In the ecosystem model, each organism is assumed to be a net energy maximizer that must exert energy to capture biomass from other organisms. The exerted energies are the "prices" that are paid to biomass, and each organism takes the prices as signals over which it has no control. The maximization problem yields the organism's demand for and supply of biomass to other organisms as functions of the prices. The demands and supplies for each biomass are aggregated over all organisms in each species which establishes biomass markets wherein biomass prices are determined. A short-run equilibrium is established when all organisms are maximizing and demand equals supply in every biomass market. If a species exhibits positive (negative) net energy in equilibrium, its population increases (decreases) and a new equilibrium follows. The demand and supply forces in the biomass markets drive each species toward zero stored energy and a long-run equilibrium. Population adjustments are not based on typical Lotka-Volterra differential equations in which one entire population adjusts to another entire population thereby masking organism behavior; instead, individual organism behavior is central to population adjustments. Numerical simulations use a marine food web in Alaska to
Methane on Mars: Thermodynamic Equilibrium and Photochemical Calculations
Levine, J. S.; Summers, M. E.; Ewell, M.
2010-01-01
The detection of methane (CH4) in the atmosphere of Mars by Mars Express and Earth-based spectroscopy is very surprising, very puzzling, and very intriguing. On Earth, about 90% of atmospheric ozone is produced by living systems. A major question concerning methane on Mars is its origin - biological or geological. Thermodynamic equilibrium calculations indicated that methane cannot be produced by atmospheric chemical/photochemical reactions. Thermodynamic equilibrium calculations for three gases, methane, ammonia (NH3) and nitrous oxide (N2O) in the Earth s atmosphere are summarized in Table 1. The calculations indicate that these three gases should not exist in the Earth s atmosphere. Yet they do, with methane, ammonia and nitrous oxide enhanced 139, 50 and 12 orders of magnitude above their calculated thermodynamic equilibrium concentration due to the impact of life! Thermodynamic equilibrium calculations have been performed for the same three gases in the atmosphere of Mars based on the assumed composition of the Mars atmosphere shown in Table 2. The calculated thermodynamic equilibrium concentrations of the same three gases in the atmosphere of Mars is shown in Table 3. Clearly, based on thermodynamic equilibrium calculations, methane should not be present in the atmosphere of Mars, but it is in concentrations approaching 30 ppbv from three distinct regions on Mars.
Incentives in Supply Function Equilibrium
DEFF Research Database (Denmark)
Vetter, Henrik
2014-01-01
The author analyses delegation in homogenous duopoly under the assumption that the firm-managers compete in supply functions. In supply function equilibrium, managers’ decisions are strategic complements. This reverses earlier findings in that the author finds that owners give managers incentives...... to act in an accommodating way. As a result, optimal delegation reduces per-firm output and increases profits to above-Cournot profits. Moreover, in supply function equilibrium the mode of competition is endogenous. This means that the author avoids results that are sensitive with respect to assuming...
Incentives in Supply Function Equilibrium
DEFF Research Database (Denmark)
Vetter, Henrik
2014-01-01
to act in an accommodating way. As a result, optimal delegation reduces per-firm output and increases profits to above-Cournot profits. Moreover, in supply function equilibrium the mode of competition is endogenous. This means that the author avoids results that are sensitive with respect to assuming......The author analyses delegation in homogenous duopoly under the assumption that the firm-managers compete in supply functions. In supply function equilibrium, managers’ decisions are strategic complements. This reverses earlier findings in that the author finds that owners give managers incentives...
Equilibrium in a Production Economy
Energy Technology Data Exchange (ETDEWEB)
Chiarolla, Maria B., E-mail: maria.chiarolla@uniroma1.it [Universita di Roma ' La Sapienza' , Dipartimento di Metodi e Modelli per l' Economia, il Territorio e la Finanza, Facolta di Economia (Italy); Haussmann, Ulrich G., E-mail: uhaus@math.ubc.ca [University of British Columbia, Department of Mathematics (Canada)
2011-06-15
Consider a closed production-consumption economy with multiple agents and multiple resources. The resources are used to produce the consumption good. The agents derive utility from holding resources as well as consuming the good produced. They aim to maximize their utility while the manager of the production facility aims to maximize profits. With the aid of a representative agent (who has a multivariable utility function) it is shown that an Arrow-Debreu equilibrium exists. In so doing we establish technical results that will be used to solve the stochastic dynamic problem (a case with infinite dimensional commodity space so the General Equilibrium Theory does not apply) elsewhere.
This equilibrium partitioning sediment benchmark (ESB) document describes procedures to derive concentrations for 32 nonionic organic chemicals in sediment which are protective of the presence of freshwater and marine benthic organisms. The equilibrium partitioning (EqP) approach...
Atomistic Simulation of Non-Equilibrium Phenomena in Hypersonic Flows
Norman, Paul Erik
The goal of this work is to model the heterogeneous recombination of atomic oxygen on silica surfaces, which is of interest for accurately predicting the heating on vehicles traveling at hypersonic speeds. This is accomplished by creating a finite rate catalytic model, which describes recombination with a set of elementary gas-surface reactions. Fundamental to a description of surface catalytic reactions are the in situ chemical structures on the surface where recombination can occur. Using molecular dynamics simulations with the Reax GSISiO potential, we find that the chemical sites active in direct gas-phase reactions on silica surfaces consist of a small number of specific structures (or defects). The existence of these defects on real silica surfaces is supported by experimental results and the structure and energetics of these defects have been verified with quantum chemical calculations. The reactions in the finite rate catalytic model are based on the interaction of molecular and atomic oxygen with these defects. Trajectory calculations are used to find the parameters in the forward rate equations, while a combination of detailed balance and transition state theory are used to find the parameters in the reverse rate equations. The rate model predicts that the oxygen recombination coefficient is relatively constant at T (300-1000 K), in agreement with experimental results. At T > 1000 K the rate model predicts a drop off in the oxygen recombination coefficient, in disagreement with experimental results, which predict that the oxygen recombination coefficient increases with temperature. A discussion of the possible reasons for this disagreement, including non-adiabatic collision dynamics, variable surface site concentrations, and additional recombination mechanisms is presented. This thesis also describes atomistic simulations with Classical Trajectory Calculation Direction Simulation Monte Carlo (CTC-DSMC), a particle based method for modeling non-equilibrium
Critical evaluation of some equilibrium constants involving organophosphorus extractants
Marcus, Y
2013-01-01
Critical Evaluation of Some Equilibrium Constants Involving Organophosphorus Extractants is a supplementary text to the compilation ""Equilibrium Constants of Liquid-Liquid Distribution Reactions (Introduction, and Part I: Organophosphorus Extractants).The book contains a number of well documented chemical reactions that are critically evaluated. The reactions evaluated comprise those from List 1 for which data are available. There are, however, a great variety of reactions that cannot be critically evaluated due to lack of experimental data and unverifiable results.Chemists will find this com
New theory of superfluidity. Method of equilibrium density matrix
Bondarev, Boris
2014-01-01
The variational theory of equilibrium boson system state to have been previously developed by the author under the density matrix formalism is applicable for researching equilibrium states and thermodynamic properties of the quantum Bose gas which consists of zero-spin particles. Particle pulse distribution function is obtained and duly employed for calculation of chemical potential, internal energy and gas capacity temperature dependences. It is found that specific phase transition, which is similar to transition of liquid helium to its superfluid state, occurs at the temperature exceeding that of the Bose condensation.
NNLOPS accurate associated HW production
Astill, William; Re, Emanuele; Zanderighi, Giulia
2016-01-01
We present a next-to-next-to-leading order accurate description of associated HW production consistently matched to a parton shower. The method is based on reweighting events obtained with the HW plus one jet NLO accurate calculation implemented in POWHEG, extended with the MiNLO procedure, to reproduce NNLO accurate Born distributions. Since the Born kinematics is more complex than the cases treated before, we use a parametrization of the Collins-Soper angles to reduce the number of variables required for the reweighting. We present phenomenological results at 13 TeV, with cuts suggested by the Higgs Cross Section Working Group.
Quantifying mixing using equilibrium reactions
Wheat, Philip M.; Posner, Jonathan D.
2009-03-01
A method of quantifying equilibrium reactions in a microchannel using a fluorometric reaction of Fluo-4 and Ca2+ ions is presented. Under the proper conditions, equilibrium reactions can be used to quantify fluid mixing without the challenges associated with constituent mixing measures such as limited imaging spatial resolution and viewing angle coupled with three-dimensional structure. Quantitative measurements of CaCl and calcium-indicating fluorescent dye Fluo-4 mixing are measured in Y-shaped microchannels. Reactant and product concentration distributions are modeled using Green's function solutions and a numerical solution to the advection-diffusion equation. Equilibrium reactions provide for an unambiguous, quantitative measure of mixing when the reactant concentrations are greater than 100 times their dissociation constant and the diffusivities are equal. At lower concentrations and for dissimilar diffusivities, the area averaged fluorescence signal reaches a maximum before the species have interdiffused, suggesting that reactant concentrations and diffusivities must be carefully selected to provide unambiguous, quantitative mixing measures. Fluorometric equilibrium reactions work over a wide range of pH and background concentrations such that they can be used for a wide variety of fluid mixing measures including industrial or microscale flows.
Understanding Thermal Equilibrium through Activities
Pathare, Shirish; Huli, Saurabhee; Nachane, Madhura; Ladage, Savita; Pradhan, Hemachandra
2015-01-01
Thermal equilibrium is a basic concept in thermodynamics. In India, this concept is generally introduced at the first year of undergraduate education in physics and chemistry. In our earlier studies (Pathare and Pradhan 2011 "Proc. episteme-4 Int. Conf. to Review Research on Science Technology and Mathematics Education" pp 169-72) we…
Financial equilibrium with career concerns
Directory of Open Access Journals (Sweden)
Amil Dasgupta
2006-03-01
Full Text Available What are the equilibrium features of a financial market where a sizeable proportion of traders face reputational concerns? This question is central to our understanding of financial markets, which are increasingly dominated by institutional investors. We construct a model of delegated portfolio management that captures key features of the US mutual fund industry and embed it in an asset pricing framework. We thus provide a formal model of financial equilibrium with career concerned agents. Fund managers differ in their ability to understand market fundamentals, and in every period investors choose a fund. In equilibrium, the presence of career concerns induces uninformed fund managers to churn, i.e., to engage in trading even when they face a negative expected return. Churners act as noise traders and enhance the level of trading volume. The equilibrium relationship between fund return and net fund flows displays a skewed shape that is consistent with stylized facts. The robustness of our core results is probed from several angles.
Equilibrium theory : A salient approach
Schalk, S.
1999-01-01
Whereas the neoclassical models in General Equilibrium Theory focus on the existence of separate commodities, this thesis regards 'bundles of trade' as the unit objects of exchange. Apart from commodities and commodity bundles in the neoclassical sense, the term `bundle of trade' includes, for
Diluted Equilibrium Sterile Neutrino Dark Matter
Patwardhan, Amol V; Kishimoto, Chad T; Kusenko, Alexander
2015-01-01
We present a model where sterile neutrinos with rest masses in the range ~ keV to ~ MeV can be the dark matter and be consistent with all laboratory, cosmological, large scale structure, and X-ray constraints. These sterile neutrinos are assumed to freeze out of thermal and chemical equilibrium with matter and radiation in the very early universe, prior to an epoch of prodigious entropy generation ("dilution") from out-of-equilibrium decay of heavy particles. In this work, we consider heavy, entropy-producing particles in the ~ TeV to ~ EeV rest mass range, possibly associated with new physics at high energy scales. The process of dilution can give the sterile neutrinos the appropriate relic densities, but it also alters their energy spectra so that they could act like cold dark matter, despite relatively low rest masses as compared to conventional dark matter candidates. Moreover, since the model does not rely on active-sterile mixing for producing the relic density, the mixing angles can be small enough to ...
Diluted equilibrium sterile neutrino dark matter
Patwardhan, Amol V.; Fuller, George M.; Kishimoto, Chad T.; Kusenko, Alexander
2015-11-01
We present a model where sterile neutrinos with rest masses in the range ˜keV to ˜MeV can be the dark matter and be consistent with all laboratory, cosmological, and large-scale structure, as well as x-ray constraints. These sterile neutrinos are assumed to freeze out of thermal and chemical equilibrium with matter and radiation in the very early Universe, prior to an epoch of prodigious entropy generation ("dilution") from out-of-equilibrium decay of heavy particles. In this work, we consider heavy, entropy-producing particles in the ˜TeV to ˜EeV rest-mass range, possibly associated with new physics at high-energy scales. The process of dilution can give the sterile neutrinos the appropriate relic densities, but it also alters their energy spectra so that they could act like cold dark matter, despite relatively low rest masses as compared to conventional dark matter candidates. Moreover, since the model does not rely on active-sterile mixing for producing the relic density, the mixing angles can be small enough to evade current x-ray or lifetime constraints. Nevertheless, we discuss how future x-ray observations, future lepton number constraints, and future observations and sophisticated simulations of large-scale structure could, in conjunction, provide evidence for this model and/or constrain and probe its parameters.
Two-Fluid Equilibrium for Transonic Poloidal Flows
Guazzotto, Luca; Betti, Riccardo
2012-03-01
Much analytical and numerical work has been done in the past on ideal MHD equilibrium in the presence of macroscopic flow. In recent years, several authors have worked on equilibrium formulations for a two-fluid system, in which inertial ions and massless electrons are treated as distinct fluids. In this work, we present our approach to the formulation of the two-fluid equilibrium problem. Particular attention is given to the relation between the two-fluid equations and the equilibrium equations for the single-fluid ideal MHD system. Our purpose is to reconsider the results of one-fluid calculation with the more accurate two-fluid model, referring in particular to the so-called transonic discontinuities, which occur when the poloidal velocity spans a range crossing the poloidal sound speed (i.e., the sound speed reduced by a factor Bp/B). It is expected that the one-fluid discontinuity will be resolved into a sharp gradient region by the two-fluid model. Also, contrary to the ideal MHD case, in the two-fluid model the equations governing the equilibrium are elliptic in the whole range of interest for transonic equilibria. The numerical solution of the two-fluid system of equations is going to be based on a code built on the structure of the existing ideal-MHD code FLOW.
Concurrent fractional and equilibrium crystallisation
Sha, Lian-Kun
2012-06-01
This paper proposes the concept of concurrent fractional and equilibrium crystallisation (CFEC) in a multi-phase magmatic system in light of experimental results on diffusivities of elements and other species in minerals and melts. A group of equations are presented to describe how the concentrations of an element or isotope change in fractionated solid, equilibrated solid, melt, liquid, and gas phases, as well as in magma, as a function of distribution coefficients and mass fractions during the CFEC process. CFEC model is a generalised and unified formulation that is valid, not only for pure fractional crystallisation (FC) and perfect equilibrium crystallisation (EC) singly, as two of its limiting end-member cases, but also for the geologically more important process of concurrent fractional and equilibrium crystallisation. The concept that both fractional and equilibrium crystallisation can operate concurrently in a magmatic system, for a given element, among different minerals, and even within different-sized crystal grains of the very same mineral phase, is of fundamental importance in deepening our current understanding of magmatic differentiation processes. CFEC probably occurs more frequently in the natural world than either pure fractional or perfect equilibrium crystallisation alone, as a result of the interplay of varying diffusivities of elements under diverse physicochemical conditions, different residence time and growth rates of mineral phases in magmas, and varying grain sizes within each phase and among different phases. The marked systematic variations in trace element concentrations in the melts of the Bishop Tuff have long been perplexing and difficult to reconcile with existing models of differentiation. CFEC, which is able to better explain the scatter trends in a systematic way than fractional crystallisation, is considered to be the cause.
Artrith, Nongnuch; Kolpak, Alexie M
2014-05-14
The shape, size, and composition of catalyst nanoparticles can have a significant influence on catalytic activity. Understanding such structure-reactivity relationships is crucial for the optimization of industrial catalysts and the design of novel catalysts with enhanced properties. In this letter, we employ a combination of first-principles computations and large-scale Monte-Carlo simulations with highly accurate neural network potentials to study the equilibrium surface structure and composition of bimetallic Au/Cu nanoparticles (NPs), which have recently been of interest as stable and efficient CO2 reduction catalysts. We demonstrate that the inclusion of explicit water molecules at a first-principles level of accuracy is necessary to predict experimentally observed trends in Au/Cu NP surface composition; in particular, we find that Au-coated core-shell NPs are thermodynamically favored in vacuum, independent of Au/Cu chemical potential and NP size, while NPs with mixed Au-Cu surfaces are preferred in aqueous solution. Furthermore, we show that both CO and O2 adsorption energies differ significantly for NPs with the equilibrium surface composition found in water and those with the equilibrium surface composition found in vacuum, suggesting large changes in CO2 reduction activity. Our results emphasize the importance of understanding and being able to predict the effects of catalytic environment on catalyst structure and activity. In addition, they demonstrate that first-principles-based neural network potentials provide a promising approach for accurately investigating the relationships between solvent, surface composition and morphology, surface electronic structure, and catalytic activity in systems composed of thousands of atoms.
Boeyens, Jan CA
2010-01-01
The composition of the most remote objects brought into view by the Hubble telescope can no longer be reconciled with the nucleogenesis of standard cosmology and the alternative explanation, in terms of the LAMBDA-Cold-Dark-Matter model, has no recognizable chemical basis. A more rational scheme, based on the chemistry and periodicity of atomic matter, opens up an exciting new interpretation of the cosmos in terms of projective geometry and general relativity. The response of atomic structure to environmental pressure predicts non-Doppler cosmical redshifts and equilibrium nucleogenesis by alp
TEA: A Code for Calculating Thermochemical Equilibrium Abundances
Blecic, Jasmina; Bowman, M Oliver
2015-01-01
We present an open-source Thermochemical Equilibrium Abundances (TEA) code that calculates the abundances of gaseous molecular species. The code is based on the methodology of White et al. (1958) and Eriksson (1971). It applies Gibbs free-energy minimization using an iterative, Lagrangian optimization scheme. Given elemental abundances, TEA calculates molecular abundances for a particular temperature and pressure or a list of temperature-pressure pairs. We tested the code against the method of Burrows & Sharp (1999), the free thermochemical equilibrium code CEA (Chemical Equilibrium with Applications), and the example given by White et al. (1958). Using their thermodynamic data, TEA reproduces their final abundances, but with higher precision. We also applied the TEA abundance calculations to models of several hot-Jupiter exoplanets, producing expected results. TEA is written in Python in a modular format. There is a start guide, a user manual, and a code document in addition to this theory paper. TEA is ...
On generalized operator quasi-equilibrium problems
Kum, Sangho; Kim, Won Kyu
2008-09-01
In this paper, we will introduce the generalized operator equilibrium problem and generalized operator quasi-equilibrium problem which generalize the operator equilibrium problem due to Kazmi and Raouf [K.R. Kazmi, A. Raouf, A class of operator equilibrium problems, J. Math. Anal. Appl. 308 (2005) 554-564] into multi-valued and quasi-equilibrium problems. Using a Fan-Browder type fixed point theorem in [S. Park, Foundations of the KKM theory via coincidences of composites of upper semicontinuous maps, J. Korean Math. Soc. 31 (1994) 493-519] and an existence theorem of equilibrium for 1-person game in [X.-P. Ding, W.K. Kim, K.-K. Tan, Equilibria of non-compact generalized games with L*-majorized preferences, J. Math. Anal. Appl. 164 (1992) 508-517] as basic tools, we prove new existence theorems on generalized operator equilibrium problem and generalized operator quasi-equilibrium problem which includes operator equilibrium problems.
DEFF Research Database (Denmark)
Schäfer, Sabine; Antoni, Catherine; Möhlenkamp, Christel
2015-01-01
Equilibrium sampling can be applied to measure freely dissolved concentrations (cfree) of hydrophobic organic chemicals (HOCs) that are considered effective concentrations for diffusive uptake and partitioning. It can also yield concentrations in lipids at thermodynamic equilibrium with the sedim...... to apply equilibrium sampling for determining bioavailability and bioaccumulation potential of HOCs, since this technique can provide a thermodynamic basis for the risk assessment and management of contaminated sediments.......Equilibrium sampling can be applied to measure freely dissolved concentrations (cfree) of hydrophobic organic chemicals (HOCs) that are considered effective concentrations for diffusive uptake and partitioning. It can also yield concentrations in lipids at thermodynamic equilibrium...... with the sediment (Clip⇔sed) by multiplying concentrations in the equilibrium sampling polymer with lipid to polymer partition coefficients. We have applied silicone coated glass jars for equilibrium sampling of seven ‘indicator’ polychlorinated biphenyls (PCBs) in sediment samples from ten locations along...
Non-Equilibrium Effects on Hypersonic Turbulent Boundary Layers
Kim, Pilbum
Understanding non-equilibrium effects of hypersonic turbulent boundary layers is essential in order to build cost efficient and reliable hypersonic vehicles. It is well known that non-equilibrium effects on the boundary layers are notable, but our understanding of the effects are limited. The overall goal of this study is to improve the understanding of non-equilibrium effects on hypersonic turbulent boundary layers. A new code has been developed for direct numerical simulations of spatially developing hypersonic turbulent boundary layers over a flat plate with finite-rate reactions. A fifth-order hybrid weighted essentially non-oscillatory scheme with a low dissipation finite-difference scheme is utilized in order to capture stiff gradients while resolving small motions in turbulent boundary layers. The code has been validated by qualitative and quantitative comparisons of two different simulations of a non-equilibrium flow and a spatially developing turbulent boundary layer. With the validated code, direct numerical simulations of four different hypersonic turbulent boundary layers, perfect gas and non-equilibrium flows of pure oxygen and nitrogen, have been performed. In order to rule out uncertainties in comparisons, the same inlet conditions are imposed for each species, and then mean and turbulence statistics as well as near-wall turbulence structures are compared at a downstream location. Based on those comparisons, it is shown that there is no direct energy exchanges between internal and turbulent kinetic energies due to thermal and chemical non-equilibrium processes in the flow field. Instead, these non-equilibria affect turbulent boundary layers by changing the temperature without changing the main characteristics of near-wall turbulence structures. This change in the temperature induces the changes in the density and viscosity and the mean flow fields are then adjusted to satisfy the conservation laws. The perturbation fields are modified according to
Protonation Equilibrium of Linear Homopolyacids
Directory of Open Access Journals (Sweden)
Požar J.
2015-07-01
Full Text Available The paper presents a short summary of investigations dealing with protonation equilibrium of linear homopolyacids, in particularly those of high charge density. Apart from the review of experimental results which can be found in the literature, a brief description of theoretical models used in processing the dependence of protonation constants on monomer dissociation degree and ionic strength is given (cylindrical model based on Poisson-Boltzmann equation, cylindrical Stern model, the models according to Ising, Högfeldt, Mandel and Katchalsky. The applicability of these models regarding the polyion charge density, electrolyte concentration and counterion type is discussed. The results of Monte Carlo simulations of protonation equilibrium are also briefly mentioned. In addition, frequently encountered errors connected with calibration of of glass electrode and the related unreliability of determined protonation constants are pointed out.
Holding Costs and Equilibrium Arbitrage
Tuckman, Bruce; Vila, Jean-Luc
1993-01-01
This paper constructs a dynamic model of the equilibrium determination of relative prices when arbitragers face holding costs. The major findings are that 1) models based on riskless arbitrage arguments alone may not provide usefully tight bounds on observed prices, 2) arbitragers are often most effective in eliminating the mispricings of shorter-term assets, 3) arbitrage activity increases the mean reversion of changes in the mispricing process and reduces their conditional volatility, and 4...
Monetary policy as equilibrium selection
Gaetano Antinolfi; Costas Azariadis; Bullard, James B.
2007-01-01
Can monetary policy guide expectations toward desirable outcomes when equilibrium and welfare are sensitive to alternative, commonly held rational beliefs? This paper studies this question in an exchange economy with endogenous debt limits in which dynamic complementarities between dated debt limits support two Pareto-ranked steady states: a suboptimal, locally stable autarkic state and a constrained optimal, locally unstable trading state. The authors identify feedback policies that reverse ...
Korshunov instantons out of equilibrium
Titov, M.; Gutman, D. B.
2016-04-01
Zero-dimensional dissipative action possesses nontrivial minima known as Korshunov instantons. They have been known so far only for imaginary time representation that is limited to equilibrium systems. In this work we reconstruct and generalise Korshunov instantons using real-time Keldysh approach. This allows us to formulate the dissipative action theory for generic nonequilibrium conditions. Possible applications of the theory to transport in strongly biased quantum dots are discussed.
An introduction to equilibrium thermodynamics
Morrill, Bernard; Hartnett, James P; Hughes, William F
1973-01-01
An Introduction to Equilibrium Thermodynamics discusses classical thermodynamics and irreversible thermodynamics. It introduces the laws of thermodynamics and the connection between statistical concepts and observable macroscopic properties of a thermodynamic system. Chapter 1 discusses the first law of thermodynamics while Chapters 2 through 4 deal with statistical concepts. The succeeding chapters describe the link between entropy and the reversible heat process concept of entropy; the second law of thermodynamics; Legendre transformations and Jacobian algebra. Finally, Chapter 10 provides a
Mesoscopic non-equilibrium thermodynamics
Directory of Open Access Journals (Sweden)
Rubi, Jose' Miguel
2008-02-01
Full Text Available Basic concepts like energy, heat, and temperature have acquired a precise meaning after the development of thermodynamics. Thermodynamics provides the basis for understanding how heat and work are related and with the general rules that the macroscopic properties of systems at equilibrium follow. Outside equilibrium and away from macroscopic regimes most of those rules cannot be applied directly. In this paper we present recent developments that extend the applicability of thermodynamic concepts deep into mesoscopic and irreversible regimes. We show how the probabilistic interpretation of thermodynamics together with probability conservation laws can be used to obtain kinetic equations describing the evolution of the relevant degrees of freedom. This approach provides a systematic method to obtain the stochastic dynamics of a system directly from the knowledge of its equilibrium properties. A wide variety of situations can be studied in this way, including many that were thought to be out of reach of thermodynamic theories, such as non-linear transport in the presence of potential barriers, activated processes, slow relaxation phenomena, and basic processes in biomolecules, like translocation and stretching.
Local equilibrium in bird flocks
Mora, Thierry; Walczak, Aleksandra M.; Del Castello, Lorenzo; Ginelli, Francesco; Melillo, Stefania; Parisi, Leonardo; Viale, Massimiliano; Cavagna, Andrea; Giardina, Irene
2016-12-01
The correlated motion of flocks is an example of global order emerging from local interactions. An essential difference with respect to analogous ferromagnetic systems is that flocks are active: animals move relative to each other, dynamically rearranging their interaction network. This non-equilibrium characteristic has been studied theoretically, but its impact on actual animal groups remains to be fully explored experimentally. Here, we introduce a novel dynamical inference technique, based on the principle of maximum entropy, which accommodates network rearrangements and overcomes the problem of slow experimental sampling rates. We use this method to infer the strength and range of alignment forces from data of starling flocks. We find that local bird alignment occurs on a much faster timescale than neighbour rearrangement. Accordingly, equilibrium inference, which assumes a fixed interaction network, gives results consistent with dynamical inference. We conclude that bird orientations are in a state of local quasi-equilibrium over the interaction length scale, providing firm ground for the applicability of statistical physics in certain active systems.
Istomin, V. A.; Kustova, E. V.
2017-02-01
The influence of electronic excitation on transport processes in non-equilibrium high-temperature ionized mixture flows is studied. Two five-component mixtures, N 2 / N2 + / N / N + / e - and O 2 / O2 + / O / O + / e - , are considered taking into account the electronic degrees of freedom for atomic species as well as the rotational-vibrational-electronic degrees of freedom for molecular species, both neutral and ionized. Using the modified Chapman-Enskog method, the transport coefficients (thermal conductivity, shear viscosity and bulk viscosity, diffusion and thermal diffusion) are calculated in the temperature range 500-50 000 K. Thermal conductivity and bulk viscosity coefficients are strongly affected by electronic states, especially for neutral atomic species. Shear viscosity, diffusion, and thermal diffusion coefficients are not sensible to electronic excitation if the size of excited states is assumed to be constant. The limits of applicability for the Stokes relation are discussed; at high temperatures, this relation is violated not only for molecular species but also for electronically excited atomic gases. Two test cases of strongly non-equilibrium flows behind plane shock waves corresponding to the spacecraft re-entry (Hermes and Fire II) are simulated numerically. Fluid-dynamic variables and heat fluxes are evaluated in gases with electronic excitation. In inviscid flows without chemical-radiative coupling, the flow-field is weakly affected by electronic states; however, in viscous flows, their influence can be more important, in particular, on the convective heat flux. The contribution of different dissipative processes to the heat transfer is evaluated as well as the effect of reaction rate coefficients. The competition of diffusion and heat conduction processes reduces the overall effect of electronic excitation on the convective heating, especially for the Fire II test case. It is shown that reliable models of chemical reaction rates are of great
Morphodynamic equilibrium of alluvial estuaries
Tambroni, Nicoletta; Bolla Pittaluga, Michele; Canestrelli, Alberto; Lanzoni, Stefano; Seminara, Giovanni
2014-05-01
The evolution of the longitudinal bed profile of an estuary, with given plan-form configuration, subject to given tidal forcing at the mouth and prescribed values of water and sediment supply from the river is investigated numerically. Our main goal is to ascertain whether, starting from some initial condition, the bed evolution tends to reach a unique equilibrium configuration asymptotically in time. Also, we investigate the morphological response of an alluvial estuary to changes in the tidal range and hydrologic forcing (flow and sediment supply). Finally, the solution helps characterizing the transition between the fluvially dominated region and the tidally dominated region of the estuary. All these issues play an important role also in interpreting how the facies changes along the estuary, thus helping to make correct paleo-environmental and sequence-stratigraphic interpretations of sedimentary successions (Dalrymple and Choi, 2007). Results show that the model is able to describe a wide class of settings ranging from tidally dominated estuaries to fluvially dominated estuaries. In the latter case, the solution is found to compare satisfactory with the analytical asymptotic solution recently derived by Seminara et al. (2012), under the hypothesis of fairly 'small' tidal oscillations. Simulations indicate that the system always moves toward an equilibrium configuration in which the net sediment flux in a tidal cycle is constant throughout the estuary and equal to the constant sediment flux discharged from the river. For constant width, the bed equilibrium profile of the estuarine channel is characterized by two distinct regions: a steeper reach seaward, dominated by the tide, and a less steep upstream reach, dominated by the river and characterized by the undisturbed bed slope. Although the latter reach, at equilibrium, is not directly affected by the tidal wave, however starting from an initial uniform stream with the constant 'fluvial' slope, the final
Accurate free energy calculation along optimized paths.
Chen, Changjun; Xiao, Yi
2010-05-01
The path-based methods of free energy calculation, such as thermodynamic integration and free energy perturbation, are simple in theory, but difficult in practice because in most cases smooth paths do not exist, especially for large molecules. In this article, we present a novel method to build the transition path of a peptide. We use harmonic potentials to restrain its nonhydrogen atom dihedrals in the initial state and set the equilibrium angles of the potentials as those in the final state. Through a series of steps of geometrical optimization, we can construct a smooth and short path from the initial state to the final state. This path can be used to calculate free energy difference. To validate this method, we apply it to a small 10-ALA peptide and find that the calculated free energy changes in helix-helix and helix-hairpin transitions are both self-convergent and cross-convergent. We also calculate the free energy differences between different stable states of beta-hairpin trpzip2, and the results show that this method is more efficient than the conventional molecular dynamics method in accurate free energy calculation.
Energy Technology Data Exchange (ETDEWEB)
Mesmer, R.E.
1990-09-12
The purpose of this travel was for the traveler to participate in the 11th IUPAC International Conference on Chemical Thermodynamics and to present a paper of which he is co-author entitled The Transition from Strong-to-Weak Electrolyte Behavior Near the Critical Point of Water'' in the session on Solutions. The conference brought together nearly 500 scientists from around the world to discuss broad aspects of experimental thermodynamics and theoretical modeling. The traveler also visited the University of Karlsruhe to discuss current research with E.U. Franck and his collaborators. This institution has been for many years one of the leading centers for experimental studies on phase equilibrium and physical chemical studies especially on pure substances under the direction of Franck.
On static equilibrium and balance puzzler
Dey, Samrat; Saikia, Dipankar; Kalita, Deepjyoti; Debbarma, Anamika; Wahab, Shaheen Akhtar; Sarma, Saurabh
2012-01-01
The principles of static equilibrium are of special interest to civil engineers. For a rigid body to be in static equilibrium the condition is that net force and net torque acting on the body should be zero. That clearly signifies that if equal weights are placed on either sides of a balance, the balance should be in equilibrium, even if its beam is not horizontal (we have considered the beam to be straight and have no thickness, an ideal case). Thus, although the weights are equal, they will appear different which is puzzling. This also shows that the concept of equilibrium is confusing, especially neutral equilibrium is confused to be stable equilibrium. The study not only throws more light on the concept of static equilibrium, but also clarifies that a structure need not be firm and steady even if it is in static equilibrium.
Equilibrium thermodynamics - Callen’s postulational approach
Jongschaap, Robert J.J.; Öttinger, Hans Christian
2001-01-01
In order to provide the background for nonequilibrium thermodynamics, we outline the fundamentals of equilibrium thermodynamics. Equilibrium thermodynamics must not only be obtained as a special case of any acceptable nonequilibrium generalization but, through its shining example, it also elucidates
Tesileanu, O; Massaglia, S
2008-01-01
Time-dependent cooling processes are of paramount importance in the evolution of astrophysical gaseous nebulae and, in particular, when radiative shocks are present. The present work introduces a necessary set of tools that can be used to model radiative astrophysical flows in the optically-thin plasma limit. We aim to provide reliable and accurate predictions of emission line ratios and radiative cooling losses in astrophysical simulations of shocked flows. Moreover, we discuss numerical implementation aspects to ease future improvements and implementation in other MHD numerical codes. The most important source of radiative cooling for our plasma conditions comes from the collisionally-excited line radiation. We evolve a chemical network, including 29 ion species, to compute the ionization balance in non-equilibrium conditions. After a series of validations and tests, typical astrophysical setups are simulated in 1D and 2D, employing both the present cooling model and a simplified one. The influence of the c...
The geometry of finite equilibrium sets
DEFF Research Database (Denmark)
Balasko, Yves; Tvede, Mich
2009-01-01
We investigate the geometry of finite datasets defined by equilibrium prices, income distributions, and total resources. We show that the equilibrium condition imposes no restrictions if total resources are collinear, a property that is robust to small perturbations. We also show that the set...... of equilibrium datasets is pathconnected when the equilibrium condition does impose restrictions on datasets, as for example when total resources are widely noncollinear....
Statistical equilibrium in cometary C2. II - Swan/Phillips band ratios
Swamy, K. S. K.; Odell, C. R.
1979-01-01
Statistical equilibrium calculations have been made for both the triplet and ground state singlets for C2 in comets, using the exchange rate as a free parameter. The predictions of the results are consistent with optical observations and may be tested definitively by accurate observations of the Phillips and Swan band ratios. Comparison with the one reported observation indicates compatibility with a low exchange rate and resonance fluorescence statistical equilibrium.
Open problems in non-equilibrium physics
Energy Technology Data Exchange (ETDEWEB)
Kusnezov, D.
1997-09-22
The report contains viewgraphs on the following: approaches to non-equilibrium statistical mechanics; classical and quantum processes in chaotic environments; classical fields in non-equilibrium situations: real time dynamics at finite temperature; and phase transitions in non-equilibrium conditions.
The concept of equilibrium in organization theory
Gazendam, Henk W.M.
1997-01-01
Many organization theories consist of an interpretation frame and an idea about the ideal equilibrium state. This article explains how the equilibrium concept is used in four organization theories: the theories of Fayol, Mintzberg, Morgan, and Volberda. Equilibrium can be defined as balance, fit or
The concept of equilibrium in organization theory
Gazendam, Henk W.M.
1998-01-01
Many organization theories consist of an interpretation frame and an idea about the ideal equilibrium state. This article explains how the equilibrium concept is used in four organization theories: the theories of Fayol, Mintzberg, Morgan, and Volberda. Equilibrium can be defined as balance, fit or
Characterization of non equilibrium effects on high quality critical flows
Energy Technology Data Exchange (ETDEWEB)
Camelo, E.; Lemonnier, H.; Ochterbeck, J. [Commissariat a l Energie Atomique, Grenoble (France)] [and others
1995-09-01
The appropriate design of various pieces of safety equipment such as relief systems, relies on the accurate description of critical flow phenomena. Most of the systems of industrial interest are willing to be described by one-dimensional area-averaged models and a large fraction of them involves multi-component high gas quality flows. Within these circumstances, the flow is very likely to be of an annular dispersed nature and its description by two-fluid models requires various closure relations. Among the most sensitive closures, there is the interfacial area and the liquid entrained fraction. The critical flowrate depends tremendously on the accurate description of the non equilibrium which results from the correctness of the closure equations. In this study, two-component flows are emphasized and non equilibrium results mainly form the differences in the phase velocities. It is therefore of the utmost importance to have reliable data to characterize non equilibrium phenomena and to assess the validity of the closure models. A comprehensive description of air-water nozzle flows, with emphasis on the effect of the nozzle geometry, has been undertaken and some of the results are presented here which helps understanding the overall flow dynamics. Besides the critical flowrate, the presented material includes pressure profiles, droplet size and velocity, liquid film flowrate and liquid film thickness.
Equilibrium figures of dwarf planets
Rambaux, Nicolas; Chambat, Frederic; Castillo-Rogez, Julie; Baguet, Daniel
2016-10-01
Dwarf planets including transneptunian objects (TNO) and Ceres are >500 km large and display a spheroidal shape. These protoplanets are left over from the formation of the solar System about 4.6 billion years ago and their study could improve our knowledge of the early solar system. They could be formed in-situ or migrated to their current positions as a consequence of large-scale solar system dynamical evolution. Quantifying their internal composition would bring constraints on their accretion environment and migration history. That information may be inferred from studying their global shapes from stellar occultations or thermal infrared imaging. Here we model the equilibrium shapes of isolated dwarf planets under the assumption of hydrostatic equilibrium that forms the basis for interpreting shape data in terms of interior structure. Deviations from hydrostaticity can shed light on the thermal and geophysical history of the bodies. The dwarf planets are generally fast rotators spinning in few hours, so their shape modeling requires numerically integration with Clairaut's equations of rotational equilibrium expanded up to third order in a small parameter m, the geodetic parameter, to reach an accuracy better than a few kilometers depending on the spin velocity and mean density. We also show that the difference between a 500-km radius homogeneous model described by a MacLaurin ellipsoid and a stratified model assuming silicate and ice layers can reach several kilometers in the long and short axes, which could be measurable. This type of modeling will be instrumental in assessing hydrostaticity and thus detecting large non-hydrostatic contributions in the observed shapes.
Risk premia in general equilibrium
DEFF Research Database (Denmark)
Posch, Olaf
This paper shows that non-linearities can generate time-varying and asymmetric risk premia over the business cycle. These (empirical) key features become relevant and asset market implications improve substantially when we allow for non-normalities in the form of rare disasters. We employ explicit...... solutions of dynamic stochastic general equilibrium models, including a novel solution with endogenous labor supply, to obtain closed-form expressions for the risk premium in production economies. We find that the curvature of the policy functions affects the risk premium through controlling the individual......'s effective risk aversion....
Boson spectra and correlations for thermal locally equilibrium systems
Sinyukov, Yu M
1999-01-01
The single- and multi- particle inclusive spectra for strongly inhomogeneous thermal boson systems are studied using the method of statistical operator. The thermal Wick's theorem is generalized and the analytical solution of the problem for an boost-invariant expanding boson gas is found. The results demonstrate the effects of inhomogeneity for such a system: the spectra and correlations for particles with wave-lengths larger than the system's homogeneity lengths change essentially as compared with the results based on the local Bose-Einstein thermal distributions. The effects noticeable grow for overpopulated media, where the chemical potential associated with violation of chemical equilibrium is large enough.
Equilibrium composition for the reaction of plutonium hydride with air
Institute of Scientific and Technical Information of China (English)
无
2002-01-01
There are six independent constituents with 4 chemical elements, i.e. PuH2.7(s), PuN(s), Pu2O3(s), N2, O2 and H2, therefore , the system described involves of 2 independent reactions ,both those of the experimental, which indicates that the chemical equilibrium is nearly completely approached. Therefore, it is believed that the reaction rate of plutonium hydride with air is extremely rapid. The present paper has briefly discussed the simultaneous reactions and its thermodynamic coupling effect.
Silverberg, Lee J.; Raff, Lionel M.
2015-01-01
Thermodynamic spontaneity-equilibrium criteria require that in a single-reaction system, reactions in either the forward or reverse direction at equilibrium be nonspontaneous. Conversely, the concept of dynamic equilibrium holds that forward and reverse reactions both occur at equal rates at equilibrium to the extent allowed by kinetic…
Pre-equilibrium plasma dynamics
Energy Technology Data Exchange (ETDEWEB)
Heinz, U.
1986-01-01
Approaches towards understanding and describing the pre-equilibrium stage of quark-gluon plasma formation in heavy-ion collisions are reviewed. Focus is on a kinetic theory approach to non-equilibrium dynamics, its extension to include the dynamics of color degrees of freedom when applied to the quark-gluon plasma, its quantum field theoretical foundations, and its relationship to both the particle formation stage at the very beginning of the nuclear collision and the hydrodynamic stage at late collision times. The usefulness of this approach to obtain the transport coefficients in the quark-gluon plasma and to derive the collective mode spectrum and damping rates in this phase are discussed. Comments are made on the general difficulty to find appropriated initial conditions to get the kinetic theory started, and a specific model is given that demonstrates that, once given such initial conditions, the system can be followed all the way through into the hydrodynamical regime. 39 refs., 7 figs. (LEW)
A general framework for ion equilibrium calculations in compacted bentonite
Birgersson, Martin
2017-03-01
An approach for treating chemical equilibrium between compacted bentonite and aqueous solutions is presented. The treatment is based on conceptualizing bentonite as a homogeneous mixture of water and montmorillonite, and assumes Gibbs-Donnan membrane equilibrium across interfaces to external solutions. An equation for calculating the electrostatic potential difference between bentonite and external solution (Donnan potential) is derived and solved analytically for some simple systems. The solutions are furthermore analyzed in order to illuminate the general mechanisms of ion equilibrium and their relation to measurable quantities. A method is suggested for estimating interlayer activity coefficients based on the notion of an interlayer ionic strength. Using this method, several applications of the framework are presented, giving a set of quantitative predictions which may be relatively simply tested experimentally, e.g.: (1) the relative amount of anions entering the bentonite depends approximately on the square-root of the external concentration for a 1:2 salt (e.g. CaCl2). For a 1:1 salt (e.g. NaCl) the dependence is approximately linear, and for a 1:2 salt (e.g. Na2SO4) the dependence is approximately quadratic. (2) Bentonite contains substantially more nitrate as compared to chloride if equilibrated with the two salt solutions at equal external concentration. (3) Potassium bentonite generally contains more anions as compared to sodium bentonite if equilibrated at the same external concentration. (4) The anion concentration ratio in two bentonite samples of different cations (but with the same density and cation exchange capacity) resembles the ion exchange selectivity coefficient for that specific cation pair. The results show that an adequate treatment of chemical equilibrium between interlayers and bulk solutions are essential when modeling compacted bentonite, and that activity corrections generally are required for relevant ion equilibrium calculations. It
Equilibrium configurations of fluids and their stability in higher dimensions
Cardoso, V; Cardoso, Vitor; Gualtieri, Leonardo
2006-01-01
We study equilibrium shapes, stability and possible bifurcation diagrams of fluids in higher dimensions, held together by either surface tension or self-gravity. We consider the equilibrium shape and stability problem of self-gravitating spheroids, establishing the formalism to generalize the MacLaurin sequence to higher dimensions. We show that such simple models, of interest on their own, also provide accurate descriptions of their general relativistic relatives with event horizons. The examples worked out here hint at some model-independent dynamics, and thus at some universality: smooth objects seem always to be well described by both ``replicas'' (either self-gravity or surface tension). As an example, we exhibit an instability afflicting self-gravitating (Newtonian) fluid cylinders. This instability is the exact analogue, within Newtonian gravity, of the Gregory-Laflamme instability in general relativity. Another example considered is a self-gravitating Newtonian torus made of a homogeneous incompressib...
Solid-liquid equilibrium of triolein with fatty alcohols
Directory of Open Access Journals (Sweden)
G. J. Maximo
2013-03-01
Full Text Available Triacylglycerols and fatty alcohols are used in the formulation of cosmetic, pharmaceutical and food products. Although information about the phase transitions of these compounds and their mixtures is frequently required for design and optimization of processes and product formulation involving these substances, these data are still scarce in the literature. In the present study, the solid-liquid phase diagrams of two binary systems composed of triolein + 1-hexadecanol and triolein + 1-octadecanol were evaluated by differential scanning calorimetry (DSC and optical microscopy. The experimental data were compared with predicted data by solving the phase equilibrium equations using an algorithm implemented in MATLAB. The liquid-phase activity coefficients were calculated using the Margules equation (two- and three-suffix and the UNIFAC model (original and modified Dortmund model. The approaches used for calculating system equilibrium allowed an accurate prediction of the liquidus line with low deviations from the experimental data.
Energy Technology Data Exchange (ETDEWEB)
Barone, Vincenzo [Scuola Normale Superiore, Piazza dei Cavalieri 7, I-56126 Pisa (Italy); Biczysko, Malgorzata, E-mail: malgorzata.biczysko@sns.it; Bloino, Julien [Scuola Normale Superiore, Piazza dei Cavalieri 7, I-56126 Pisa (Italy); Consiglio Nazionale delle Ricerche, Istituto di Chimica dei Composti OrganoMetallici (ICCOM-CNR), UOS di Pisa, Area della Ricerca CNR, Via G. Moruzzi 1, I-56124 Pisa (Italy); Puzzarini, Cristina [Dipartimento di Chimica “Giacomo Ciamician,” Università di Bologna, Via F. Selmi 2, I-40126 Bologna (Italy)
2014-07-21
Oxirane derivatives are the most used benchmarks for chiroptical spectroscopies in view of their small size and relative rigidity. The molecular structure, vibrational harmonic and anharmonic frequencies, and infrared intensities of the ground electronic states are analyzed in this paper. Equilibrium structure and harmonic force fields have been evaluated by means of high-level quantum-chemical calculations at the coupled-cluster level including single and double excitations together with a perturbative treatment of triples (CCSD(T)). Extrapolation to the complete basis-set limit as well as core-correlation effects have also been taken into account. Anharmonic contributions have been computed at the CCSD(T)/cc-pVTZ level for trans-2,3-dideuterooxirane. These data can serve as references to evaluate the accuracy of less expensive computational approaches rooted in the density functional theory (DFT). The latter have been used within hybrid CC/DFT approaches, which have been applied to simulate fully anharmonic infrared (IR) spectra. Finally, the best theoretical estimates of the equilibrium structures and vibrational wavenumbers are compared to the most accurate experimental data and show in all cases very good agreement, i.e., within 0.001 Å, 0.1 deg, 10 cm{sup −1}, and 0.5 km mol{sup −1}, for bond lengths, angles, wavenumbers, and IR intensities, respectively.
Non-equilibrium chemistry and cooling in simulations of galaxy formation
Richings, Alexander James
2015-01-01
In this thesis we used numerical simulations to explore the role that chemistry plays in galaxy formation. Simulations of galaxies often assume chemical equilibrium, where the chemical reactions between ions and molecules have reached a steady state. However, this assumption may not be valid if the
Accurate basis set truncation for wavefunction embedding
Barnes, Taylor A.; Goodpaster, Jason D.; Manby, Frederick R.; Miller, Thomas F.
2013-07-01
Density functional theory (DFT) provides a formally exact framework for performing embedded subsystem electronic structure calculations, including DFT-in-DFT and wavefunction theory-in-DFT descriptions. In the interest of efficiency, it is desirable to truncate the atomic orbital basis set in which the subsystem calculation is performed, thus avoiding high-order scaling with respect to the size of the MO virtual space. In this study, we extend a recently introduced projection-based embedding method [F. R. Manby, M. Stella, J. D. Goodpaster, and T. F. Miller III, J. Chem. Theory Comput. 8, 2564 (2012)], 10.1021/ct300544e to allow for the systematic and accurate truncation of the embedded subsystem basis set. The approach is applied to both covalently and non-covalently bound test cases, including water clusters and polypeptide chains, and it is demonstrated that errors associated with basis set truncation are controllable to well within chemical accuracy. Furthermore, we show that this approach allows for switching between accurate projection-based embedding and DFT embedding with approximate kinetic energy (KE) functionals; in this sense, the approach provides a means of systematically improving upon the use of approximate KE functionals in DFT embedding.
Efficient and accurate fragmentation methods.
Pruitt, Spencer R; Bertoni, Colleen; Brorsen, Kurt R; Gordon, Mark S
2014-09-16
Conspectus Three novel fragmentation methods that are available in the electronic structure program GAMESS (general atomic and molecular electronic structure system) are discussed in this Account. The fragment molecular orbital (FMO) method can be combined with any electronic structure method to perform accurate calculations on large molecular species with no reliance on capping atoms or empirical parameters. The FMO method is highly scalable and can take advantage of massively parallel computer systems. For example, the method has been shown to scale nearly linearly on up to 131 000 processor cores for calculations on large water clusters. There have been many applications of the FMO method to large molecular clusters, to biomolecules (e.g., proteins), and to materials that are used as heterogeneous catalysts. The effective fragment potential (EFP) method is a model potential approach that is fully derived from first principles and has no empirically fitted parameters. Consequently, an EFP can be generated for any molecule by a simple preparatory GAMESS calculation. The EFP method provides accurate descriptions of all types of intermolecular interactions, including Coulombic interactions, polarization/induction, exchange repulsion, dispersion, and charge transfer. The EFP method has been applied successfully to the study of liquid water, π-stacking in substituted benzenes and in DNA base pairs, solvent effects on positive and negative ions, electronic spectra and dynamics, non-adiabatic phenomena in electronic excited states, and nonlinear excited state properties. The effective fragment molecular orbital (EFMO) method is a merger of the FMO and EFP methods, in which interfragment interactions are described by the EFP potential, rather than the less accurate electrostatic potential. The use of EFP in this manner facilitates the use of a smaller value for the distance cut-off (Rcut). Rcut determines the distance at which EFP interactions replace fully quantum
Accurate determination of antenna directivity
DEFF Research Database (Denmark)
Dich, Mikael
1997-01-01
The derivation of a formula for accurate estimation of the total radiated power from a transmitting antenna for which the radiated power density is known in a finite number of points on the far-field sphere is presented. The main application of the formula is determination of directivity from power......-pattern measurements. The derivation is based on the theory of spherical wave expansion of electromagnetic fields, which also establishes a simple criterion for the required number of samples of the power density. An array antenna consisting of Hertzian dipoles is used to test the accuracy and rate of convergence...
3D Equilibrium Reconstructions in DIII-D
Lao, L. L.; Ferraro, N. W.; Strait, E. J.; Turnbull, A. D.; King, J. D.; Hirshman, H. P.; Lazarus, E. A.; Sontag, A. C.; Hanson, J.; Trevisan, G.
2013-10-01
Accurate and efficient 3D equilibrium reconstruction is needed in tokamaks for study of 3D magnetic field effects on experimentally reconstructed equilibrium and for analysis of MHD stability experiments with externally imposed magnetic perturbations. A large number of new magnetic probes have been recently installed in DIII-D to improve 3D equilibrium measurements and to facilitate 3D reconstructions. The V3FIT code has been in use in DIII-D to support 3D reconstruction and the new magnetic diagnostic design. V3FIT is based on the 3D equilibrium code VMEC that assumes nested magnetic surfaces. V3FIT uses a pseudo-Newton least-square algorithm to search for the solution vector. In parallel, the EFIT equilibrium reconstruction code is being extended to allow for 3D effects using a perturbation approach based on an expansion of the MHD equations. EFIT uses the cylindrical coordinate system and can include the magnetic island and stochastic effects. Algorithms are being developed to allow EFIT to reconstruct 3D perturbed equilibria directly making use of plasma response to 3D perturbations from the GATO, MARS-F, or M3D-C1 MHD codes. DIII-D 3D reconstruction examples using EFIT and V3FIT and the new 3D magnetic data will be presented. Work supported in part by US DOE under DE-FC02-04ER54698, DE-FG02-95ER54309 and DE-AC05-06OR23100.
High resolution equilibrium calculations of pedestal and SOL plasma in tokamaks
Medvedev, S. Yu; Martynov, A. A.; Drozdov, V. V.; Ivanov, A. A.; Poshekhonov, Yu Yu
2017-02-01
For integrated modeling of equilibrium, stability and dynamics of the divertor tokamak plasma with scrape-off layer (SOL) high resolution equilibrium calculations are needed. A new version of the CAXE equilibrium code computes the tokamak equilibrium on a numerical grid adaptive to magnetic surfaces both in the plasma region with closed flux surfaces and in the SOL region with open magnetic lines. The plasma profiles can be prescribed independently in each region with nested flux surfaces, and realistic SOL profiles with very short pressure drop off length can be accurately treated. The influence of the finite current density in SOL on the connection length is studied. From the point of view of the MHD equilibrium and stability modeling, self-consistent calculations of diverted tokamak configurations with finite current density at the separatrix require taking into account plasma outside the separatrix. Calculated high resolution equilibria provide an input to new versions of the ideal MHD stability codes treating tokamak plasma with SOL. The study of the influence of the pressure gradient profile in the pedestal plasma inside and outside the separatrix on the pedestal height limit set by external kink-ballooning mode stability is presented. Another possible application of the high resolution pedestal and SOL equilibrium code is a coupling to the SOLPS code with a purpose to increase equilibrium accuracy and support self-consistent plasma flow/equilibrium modeling.
Equilibrium calculations of firework mixtures
Energy Technology Data Exchange (ETDEWEB)
Hobbs, M.L. [Sandia National Labs., Albuquerque, NM (United States); Tanaka, Katsumi; Iida, Mitsuaki; Matsunaga, Takehiro [National Inst. of Materials and Chemical Research, Tsukuba, Ibaraki (Japan)
1994-12-31
Thermochemical equilibrium calculations have been used to calculate detonation conditions for typical firework components including three report charges, two display charges, and black powder which is used as a fuse or launch charge. Calculations were performed with a modified version of the TIGER code which allows calculations with 900 gaseous and 600 condensed product species at high pressure. The detonation calculations presented in this paper are thought to be the first report on the theoretical study of firework detonation. Measured velocities for two report charges are available and compare favorably to predicted detonation velocities. However, the measured velocities may not be true detonation velocities. Fast deflagration rather than an ideal detonation occurs when reactants contain significant amounts of slow reacting constituents such as aluminum or titanium. Despite such uncertainties in reacting pyrotechnics, the detonation calculations do show the complex nature of condensed phase formation at elevated pressures and give an upper bound for measured velocities.
Equilibrium Analysis in Cake Cutting
DEFF Research Database (Denmark)
Branzei, Simina; Miltersen, Peter Bro
2013-01-01
Cake cutting is a fundamental model in fair division; it represents the problem of fairly allocating a heterogeneous divisible good among agents with different preferences. The central criteria of fairness are proportionality and envy-freeness, and many of the existing protocols are designed...... to guarantee proportional or envy-free allocations, when the participating agents follow the protocol. However, typically, all agents following the protocol is not guaranteed to result in a Nash equilibrium. In this paper, we initiate the study of equilibria of classical cake cutting protocols. We consider one...... of the simplest and most elegant continuous algorithms -- the Dubins-Spanier procedure, which guarantees a proportional allocation of the cake -- and study its equilibria when the agents use simple threshold strategies. We show that given a cake cutting instance with strictly positive value density functions...
Neoclassical equilibrium in gyrokinetic simulations
Garbet, X.; Dif-Pradalier, G.; Nguyen, C.; Sarazin, Y.; Grandgirard, V.; Ghendrih, Ph.
2009-06-01
This paper presents a set of model collision operators, which reproduce the neoclassical equilibrium and comply with the constraints of a full-f global gyrokinetic code. The assessment of these operators is based on an entropy variational principle, which allows one to perform a fast calculation of the neoclassical diffusivity and poloidal velocity. It is shown that the force balance equation is recovered at lowest order in the expansion parameter, the normalized gyroradius, hence allowing one to calculate correctly the radial electric field. Also, the conventional neoclassical transport and the poloidal velocity are reproduced in the plateau and banana regimes. The advantages and drawbacks of the various model operators are discussed in view of the requirements for neoclassical and turbulent transport.
Local non-equilibrium thermodynamics.
Jinwoo, Lee; Tanaka, Hajime
2015-01-16
Local Shannon entropy lies at the heart of modern thermodynamics, with much discussion of trajectory-dependent entropy production. When taken at both boundaries of a process in phase space, it reproduces the second law of thermodynamics over a finite time interval for small scale systems. However, given that entropy is an ensemble property, it has never been clear how one can assign such a quantity locally. Given such a fundamental omission in our knowledge, we construct a new ensemble composed of trajectories reaching an individual microstate, and show that locally defined entropy, information, and free energy are properties of the ensemble, or trajectory-independent true thermodynamic potentials. We find that the Boltzmann-Gibbs distribution and Landauer's principle can be generalized naturally as properties of the ensemble, and that trajectory-free state functions of the ensemble govern the exact mechanism of non-equilibrium relaxation.
Ringed accretion disks: equilibrium configurations
Pugliese, D
2015-01-01
We investigate a model of ringed accretion disk, made up by several rings rotating around a supermassive Kerr black hole attractor. Each toroid of the ringed disk is governed by the General Relativity hydrodynamic Boyer condition of equilibrium configurations of rotating perfect fluids. Properties of the tori can be then determined by an appropriately defined effective potential reflecting the background Kerr geometry and the centrifugal effects. The ringed disks could be created in various regimes during the evolution of matter configurations around supermassive black holes. Therefore, both corotating and counterrotating rings have to be considered as being a constituent of the ringed disk. We provide constraints on the model parameters for the existence and stability of various ringed configurations and discuss occurrence of accretion onto the Kerr black hole and possible launching of jets from the ringed disk. We demonstrate that various ringed disks can be characterized by a maximum number of rings. We pr...
Simplified method for calculation of equilibrium plasma composition
Rydalevskaya, Maria A.
2017-06-01
In this work, a simplified method for the evaluation of equilibrium composition of plasmas consisted of monoatomic species is proposed. Multicomponent gas systems resulting from thermal ionization of spatially uniform mixtures are assumed enough rarefied to be treated as ideal gases even after multiple ionization steps. The method developed for the calculation of equilibrium composition of these mixtures makes use of the fundamental principles of statistical physics. Equilibrium concentrations of mixture components are determined by integration of distribution functions over the space of momentum and summation over electronic energy levels. These functions correspond to the entropy maximum. To determine unknown parameters, the systems of equations corresponding to the normalization conditions are derived. It is shown that the systems may be reduced to one algebraic equation if the equilibrium temperature is known. Numeral method to solve this equation is proposed. Special attention is given to the ionized mixtures, generated from the atoms of a single chemical species and the situations, when in the gas only the first- or the first- and second-order ionization are possible.
General Relativistic Equilibrium Models of Magnetized Neutron Stars
Pili, A G; Del Zanna, L
2013-01-01
Magnetic fields play a crucial role in many astrophysical scenarios and, in particular, are of paramount importance in the emission mechanism and evolution of Neutron Stars (NSs). To understand the role of the magnetic field in compact objects it is important to obtain, as a first step, accurate equilibrium models for magnetized NSs. Using the conformally flat approximation we solve the Einstein's equations together with the GRMHD equations in the case of a static axisymmetryc NS taking into account different types of magnetic configuration. This allows us to investigate the effect of the magnetic field on global properties of NSs such as their deformation.
Palberg, Thomas; Wette, Patrick; Herlach, Dieter M
2016-02-01
The interfacial free energy is a central quantity in crystallization from the metastable melt. In suspensions of charged colloidal spheres, nucleation and growth kinetics can be accurately measured from optical experiments. In previous work, from these data effective nonequilibrium values for the interfacial free energy between the emerging bcc nuclei and the adjacent melt in dependence on the chemical potential difference between melt phase and crystal phase were derived using classical nucleation theory (CNT). A strictly linear increase of the interfacial free energy was observed as a function of increased metastability. Here, we further analyze these data for five aqueous suspensions of charged spheres and one binary mixture. We utilize a simple extrapolation scheme and interpret our findings in view of Turnbull's empirical rule. This enables us to present the first systematic experimental estimates for a reduced interfacial free energy, σ(0,bcc), between the bcc-crystal phase and the coexisting equilibrium fluid. Values obtained for σ(0,bcc) are on the order of a few k(B)T. Their values are not correlated to any of the electrostatic interaction parameters but rather show a systematic decrease with increasing size polydispersity and a lower value for the mixture as compared to the pure components. At the same time, σ(0) also shows an approximately linear correlation to the entropy of freezing. The equilibrium interfacial free energy of strictly monodisperse charged spheres may therefore be still greater.
Directory of Open Access Journals (Sweden)
Hameed Metghalchi
2009-03-01
Full Text Available Rate-controlled constrained-equilibrium method, firmly based on the second law of thermodynamics, is applied to the expansion of combustion products of methane during the power stroke of an internal combustion engine. The constraints used in this study are the elemental oxygen, hydrogen, carbon and nitrogen together with other four dynamic constraints of total number of moles, moles of DCO (CO+HCO, moles of free valence and moles of free oxygen. Since at chemical equilibrium, the mixture composition is dominated by H/O, CO/CO2, and a few other carbon-containing species, almost independent of the fuel molecule, the set results in accurate predictions of the kinetic effects observed in all H/O and CO/CO2 compounds and temperature history. It is shown that the constrained-equilibrium predictions of all the species composed of the specified atomic elements can be obtained independent of a kinetic path, provided their Gibbs free energies are known.
Mesoscopic non-equilibrium thermodynamic analysis of molecular motors.
Kjelstrup, S; Rubi, J M; Pagonabarraga, I; Bedeaux, D
2013-11-28
We show that the kinetics of a molecular motor fueled by ATP and operating between a deactivated and an activated state can be derived from the principles of non-equilibrium thermodynamics applied to the mesoscopic domain. The activation by ATP, the possible slip of the motor, as well as the forward stepping carrying a load are viewed as slow diffusion along a reaction coordinate. Local equilibrium is assumed in the reaction coordinate spaces, making it possible to derive the non-equilibrium thermodynamic description. Using this scheme, we find expressions for the velocity of the motor, in terms of the driving force along the spacial coordinate, and for the chemical reaction that brings about activation, in terms of the chemical potentials of the reactants and products which maintain the cycle. The second law efficiency is defined, and the velocity corresponding to maximum power is obtained for myosin movement on actin. Experimental results fitting with the description are reviewed, giving a maximum efficiency of 0.45 at a myosin headgroup velocity of 5 × 10(-7) m s(-1). The formalism allows the introduction and test of meso-level models, which may be needed to explain experiments.
A partial equilibrium theory for liquids bonded to immobile solids.
Searcy, Alan W; Beruto, Dario T; Barberis, Fabrizio
2009-05-14
In order to obtain consistency with the force balance theory of Young and Laplace, which quantitatively predicts the height of capillary rise from the contact angles of drops on solid surfaces, Gibbs made chemical potentials in interface functions of the integral interface free energies. We cite evidence that equilibrium chemical potentials in one-component systems are identical at interfaces to equilibrium chemical potentials in bulk phases. We evaluate two postulates. (1) Partial free energies of liquids at an interface with a solid are functions of the strength and range of attractive fields outside solid phase boundaries. (2) At equilibrium, the chemical potentials in all interfaces of a one-component liquid equal the chemical potential in its interior when the liquid is bonded to one or more immiscible solids. These postulates yield equations for partial equilibrium (PE) states of drops, films, and liquids. The PE equations yield the same prediction of the height of a meniscus from the contact angle of drops as does Young-Laplace theory and also the same dependence of the volume of capillary condensate on vapor pressure as does the Kelvin equation. But our measurements of the contact angles of water on glass and Teflon and between their close-spaced surfaces contradict the YL supposition that meniscus angles are the same as angles of drops on glass and Teflon surfaces and support the PE postulate that attraction by the external fields of solids, not meniscus curvature, is responsible for capillary rise. We use published data to illustrate the validity of the PE conclusion that divergence or convergence at the saturation pressure of a parent liquid depends on whether or not the attractive field of a solid surface imparts to the liquid more than twice the energy required to create two liquid-vapor interfaces. For divergent water films on quartz, the PE equation provides a quantitative fit to experimental data for films of any thickness greater than 1.5 nm. No
Physical Equilibrium Evaluation in Parkinson Disease
Directory of Open Access Journals (Sweden)
Schmidt, Paula da Silva
2011-04-01
Full Text Available Introduction: The Parkinson disease can be among the multiple causes of alterations in the physical equilibrium. Accordingly, this study has the objective to evaluate Parkinson patients' physical equilibrium. Method: Potential study in which 12 Parkinson individuals were evaluated by way of tests of static and dynamic equilibrium, dynamic posturography and vectoelectronystagmograph. To compare the dynamic posturography results a group of gauged control was used. Results: Alterations in Romberg-Barré, Unterberger and Walk tests were found. The vestibular exam revealed 06 normal cases, 04 central vestibular syndrome and 02 cases of peripheral vestibular syndrome. In the dynamic posturography, an equilibrium alteration has been verified, when compared to the control group in all Sensorial Organization Tests, in average and in the utilization of vestibular system. Conclusion: Parkinson patients present a physical equilibrium alteration. The dynamic posturography was more sensitive to detect the equilibrium alterations than vectoelectronystagmograph.
A Constructive Generalization of Nash Equilibrium
Huang, Xiaofei
2009-01-01
In a society of multiple individuals, if everybody is only interested in maximizing his own payoff, will there exist any equilibrium for the society? John Nash proved more than 50 years ago that an equilibrium always exists such that nobody would benefit from unilaterally changing his strategy. Nash Equilibrium is a central concept in game theory, which offers the mathematical foundation for social science and economy. However, the original definition is declarative without including a solution to find them. It has been found later that it is computationally difficult to find a Nash equilibrium. Furthermore, a Nash equilibrium may be unstable, sensitive to the smallest variation of payoff functions. Making the situation worse, a society with selfish individuals can have an enormous number of equilibria, making it extremely hard to find out the global optimal one. This paper offers a constructive generalization of Nash equilibrium to cover the case when the selfishness of individuals are reduced to lower level...
Equilibrium Solubility of CO2 in Alkanolamines
DEFF Research Database (Denmark)
Waseem Arshad, Muhammad; Fosbøl, Philip Loldrup; von Solms, Nicolas
2014-01-01
Equilibrium solubility of CO2 were measured in aqueous solutions of Monoethanolamine (MEA) and N,N-diethylethanolamine(DEEA). Equilibrium cells are generally used for these measurements. In this study, the equilibrium data were measured from the calorimetry. For this purpose a reaction calorimeter...... (model CPA 122 from ChemiSens AB, Sweden) was used. The advantage of this method is being the measurement of both heats of absorption and equilibrium solubility data of CO2 at the same time. The measurements were performed for 30 mass % MEA and 5M DEEA solutions as a function of CO2 loading at three...... different temperatures 40, 80 and 120 ºC. The measured 30 mass % MEA and 5M DEEA data were compared with the literature data obtained from different equilibrium cells which validated the use of calorimeters for equilibrium solubility measurements....
Mathematical models and equilibrium in irreversible microeconomics
Directory of Open Access Journals (Sweden)
Anatoly M. Tsirlin
2010-07-01
Full Text Available A set of equilibrium states in a system consisting of economic agents, economic reservoirs, and firms is considered. Methods of irreversible microeconomics are used. We show that direct sale/purchase leads to an equilibrium state which depends upon the coefficients of supply/demand functions. To reach the unique equilibrium state it is necessary to add either monetary exchange or an intermediate firm.
Characteristics of equilibrium reaction of zolazepam.
Hong, W H; Szulczewski, D H
1981-06-01
The equilibrium reaction of zolazepam, a pyrazolodiazepinone, was studied and analyzed using the approach used previously for other pyrazolodiazepinone derivatives. The intrinsic ring closure equilibrium constant for this reaction was approximately 100 times larger than that observed for pyrazolodiazepinones studied previously. This study illustrates that the diazepinone ring can dominate in equilibrium mixtures formed at pH values far below the pKa of the corresponding form.
Accurate ab initio spin densities
Boguslawski, Katharina; Legeza, Örs; Reiher, Markus
2012-01-01
We present an approach for the calculation of spin density distributions for molecules that require very large active spaces for a qualitatively correct description of their electronic structure. Our approach is based on the density-matrix renormalization group (DMRG) algorithm to calculate the spin density matrix elements as basic quantity for the spatially resolved spin density distribution. The spin density matrix elements are directly determined from the second-quantized elementary operators optimized by the DMRG algorithm. As an analytic convergence criterion for the spin density distribution, we employ our recently developed sampling-reconstruction scheme [J. Chem. Phys. 2011, 134, 224101] to build an accurate complete-active-space configuration-interaction (CASCI) wave function from the optimized matrix product states. The spin density matrix elements can then also be determined as an expectation value employing the reconstructed wave function expansion. Furthermore, the explicit reconstruction of a CA...
The Accurate Particle Tracer Code
Wang, Yulei; Qin, Hong; Yu, Zhi
2016-01-01
The Accurate Particle Tracer (APT) code is designed for large-scale particle simulations on dynamical systems. Based on a large variety of advanced geometric algorithms, APT possesses long-term numerical accuracy and stability, which are critical for solving multi-scale and non-linear problems. Under the well-designed integrated and modularized framework, APT serves as a universal platform for researchers from different fields, such as plasma physics, accelerator physics, space science, fusion energy research, computational mathematics, software engineering, and high-performance computation. The APT code consists of seven main modules, including the I/O module, the initialization module, the particle pusher module, the parallelization module, the field configuration module, the external force-field module, and the extendible module. The I/O module, supported by Lua and Hdf5 projects, provides a user-friendly interface for both numerical simulation and data analysis. A series of new geometric numerical methods...
Accurate Modeling of Advanced Reflectarrays
DEFF Research Database (Denmark)
Zhou, Min
Analysis and optimization methods for the design of advanced printed re ectarrays have been investigated, and the study is focused on developing an accurate and efficient simulation tool. For the analysis, a good compromise between accuracy and efficiency can be obtained using the spectral domain...... to the POT. The GDOT can optimize for the size as well as the orientation and position of arbitrarily shaped array elements. Both co- and cross-polar radiation can be optimized for multiple frequencies, dual polarization, and several feed illuminations. Several contoured beam reflectarrays have been designed...... using the GDOT to demonstrate its capabilities. To verify the accuracy of the GDOT, two offset contoured beam reflectarrays that radiate a high-gain beam on a European coverage have been designed and manufactured, and subsequently measured at the DTU-ESA Spherical Near-Field Antenna Test Facility...
Accurate thickness measurement of graphene
Shearer, Cameron J.; Slattery, Ashley D.; Stapleton, Andrew J.; Shapter, Joseph G.; Gibson, Christopher T.
2016-03-01
Graphene has emerged as a material with a vast variety of applications. The electronic, optical and mechanical properties of graphene are strongly influenced by the number of layers present in a sample. As a result, the dimensional characterization of graphene films is crucial, especially with the continued development of new synthesis methods and applications. A number of techniques exist to determine the thickness of graphene films including optical contrast, Raman scattering and scanning probe microscopy techniques. Atomic force microscopy (AFM), in particular, is used extensively since it provides three-dimensional images that enable the measurement of the lateral dimensions of graphene films as well as the thickness, and by extension the number of layers present. However, in the literature AFM has proven to be inaccurate with a wide range of measured values for single layer graphene thickness reported (between 0.4 and 1.7 nm). This discrepancy has been attributed to tip-surface interactions, image feedback settings and surface chemistry. In this work, we use standard and carbon nanotube modified AFM probes and a relatively new AFM imaging mode known as PeakForce tapping mode to establish a protocol that will allow users to accurately determine the thickness of graphene films. In particular, the error in measuring the first layer is reduced from 0.1-1.3 nm to 0.1-0.3 nm. Furthermore, in the process we establish that the graphene-substrate adsorbate layer and imaging force, in particular the pressure the tip exerts on the surface, are crucial components in the accurate measurement of graphene using AFM. These findings can be applied to other 2D materials.
Accurate thickness measurement of graphene.
Shearer, Cameron J; Slattery, Ashley D; Stapleton, Andrew J; Shapter, Joseph G; Gibson, Christopher T
2016-03-29
Graphene has emerged as a material with a vast variety of applications. The electronic, optical and mechanical properties of graphene are strongly influenced by the number of layers present in a sample. As a result, the dimensional characterization of graphene films is crucial, especially with the continued development of new synthesis methods and applications. A number of techniques exist to determine the thickness of graphene films including optical contrast, Raman scattering and scanning probe microscopy techniques. Atomic force microscopy (AFM), in particular, is used extensively since it provides three-dimensional images that enable the measurement of the lateral dimensions of graphene films as well as the thickness, and by extension the number of layers present. However, in the literature AFM has proven to be inaccurate with a wide range of measured values for single layer graphene thickness reported (between 0.4 and 1.7 nm). This discrepancy has been attributed to tip-surface interactions, image feedback settings and surface chemistry. In this work, we use standard and carbon nanotube modified AFM probes and a relatively new AFM imaging mode known as PeakForce tapping mode to establish a protocol that will allow users to accurately determine the thickness of graphene films. In particular, the error in measuring the first layer is reduced from 0.1-1.3 nm to 0.1-0.3 nm. Furthermore, in the process we establish that the graphene-substrate adsorbate layer and imaging force, in particular the pressure the tip exerts on the surface, are crucial components in the accurate measurement of graphene using AFM. These findings can be applied to other 2D materials.
Limestone Calcination Nearby Equilibrium: Kinetics, CaO Crystal Structure, Sintering and Reactivity
Valverde, J.M.; Sánchez-Jiménez, P.E.; Pérez-Maqueda, Luis A.
2015-01-01
© 2015 American Chemical Society. In this work, we analyze limestone calcination kinetics at environmental conditions involving a CO2 partial pressure P close to the equilibrium pressure Peq by means of in situ X-ray diffraction (XRD) and thermogravimetric (TG) analyses. In contrast with previous empirical observations carried out mostly at conditions far from equilibrium (P/Peq « 1), our results show that the decarbonation rate decreases as the temperature in increased while P/Peq is kept co...
1-D EQUILIBRIUM DISCRETE DIFFUSION MONTE CARLO
Energy Technology Data Exchange (ETDEWEB)
T. EVANS; ET AL
2000-08-01
We present a new hybrid Monte Carlo method for 1-D equilibrium diffusion problems in which the radiation field coexists with matter in local thermodynamic equilibrium. This method, the Equilibrium Discrete Diffusion Monte Carlo (EqDDMC) method, combines Monte Carlo particles with spatially discrete diffusion solutions. We verify the EqDDMC method with computational results from three slab problems. The EqDDMC method represents an incremental step toward applying this hybrid methodology to non-equilibrium diffusion, where it could be simultaneously coupled to Monte Carlo transport.
Reflective Equilibrium: Epistemological or Political?
Directory of Open Access Journals (Sweden)
Andrew Lister
2016-01-01
Full Text Available One of the reasons for ongoing interest in the work of political philosopher John Rawls is that he developed novel methods for thinking systematically about the nature of justice. This paper examines the moral and epistemological motivations for Rawls’s method of “reflective equilibrium,” and the tension between them in Kai Nielsen’s use of “wide reflective equilibrium” in the service of critical and emancipatory social theory. Une des raisons de l’intérêt soutenu pour l’oeuvre du philosophe politique John Rawls est qu’il a développé de nouvelles méthodes de réflexion systématique au sujet de la nature de la justice. Cet article étudie les motifs moraux et épistémologiques soutenant la méthode d’ «équilibre réflectif» de Rawls, et les tensions entre eux dans l’utilisation par Kai Nielsen d’ «équilibre réflectif étendu» au service de la théorie sociale critique et émancipatrice.
Colin Rowe and ' Dynamic Equilibrium'
Directory of Open Access Journals (Sweden)
Pablo López Marín
2015-05-01
Full Text Available AbstractIn 1944 Gyorgy Kepes published what undoubtless will be his most influential text, "The language of vision". What Kepes tried to do was a guide of grammar and syntax of vision, which allows to face art as purely sensory experience or just visual, devisted of any literary , semantic or sentimental meaning.Among all the concepts that Kepes developes in his essay perhaps the most decisive one is the so called dynamic equilibrium, which is introduced in this work for fi rst time, verbalizing something that was in the air, orbiting around the entire modern plastic but far only explained in an empirical way.Colin Rowe reverberates the recent readed kepesian ideas on his own writings Transparency: Literal and Phenomenal and Neo-'Classicism' and Modern Architecture I and II, when the author tries to highlight the founding principles of the modern movement refusing the plastic dimension of the discipline . The article will try to expose and explain this influence.
RINGED ACCRETION DISKS: EQUILIBRIUM CONFIGURATIONS
Energy Technology Data Exchange (ETDEWEB)
Pugliese, D.; Stuchlík, Z., E-mail: d.pugliese.physics@gmail.com, E-mail: zdenek.stuchlik@physics.cz [Institute of Physics and Research Centre of Theoretical Physics and Astrophysics, Faculty of Philosophy and Science, Silesian University in Opava, Bezručovo náměstí 13, CZ-74601 Opava (Czech Republic)
2015-12-15
We investigate a model of a ringed accretion disk, made up by several rings rotating around a supermassive Kerr black hole attractor. Each toroid of the ringed disk is governed by the general relativity hydrodynamic Boyer condition of equilibrium configurations of rotating perfect fluids. Properties of the tori can then be determined by an appropriately defined effective potential reflecting the background Kerr geometry and the centrifugal effects. The ringed disks could be created in various regimes during the evolution of matter configurations around supermassive black holes. Therefore, both corotating and counterrotating rings have to be considered as being a constituent of the ringed disk. We provide constraints on the model parameters for the existence and stability of various ringed configurations and discuss occurrence of accretion onto the Kerr black hole and possible launching of jets from the ringed disk. We demonstrate that various ringed disks can be characterized by a maximum number of rings. We present also a perturbation analysis based on evolution of the oscillating components of the ringed disk. The dynamics of the unstable phases of the ringed disk evolution seems to be promising in relation to high-energy phenomena demonstrated in active galactic nuclei.
Equilibrium avalanches in spin glasses
Le Doussal, Pierre; Müller, Markus; Wiese, Kay Jörg
2012-06-01
We study the distribution of equilibrium avalanches (shocks) in Ising spin glasses which occur at zero temperature upon small changes in the magnetic field. For the infinite-range Sherrington-Kirkpatrick (SK) model, we present a detailed derivation of the density ρ(ΔM) of the magnetization jumps ΔM. It is obtained by introducing a multicomponent generalization of the Parisi-Duplantier equation, which allows us to compute all cumulants of the magnetization. We find that ρ(ΔM)˜ΔM-τ with an avalanche exponent τ=1 for the SK model, originating from the marginal stability (criticality) of the model. It holds for jumps of size 1≪ΔMmodel. For finite-range models, using droplet arguments, we obtain the prediction τ=(df+θ)/dm where df,dm, and θ are the fractal dimension, magnetization exponent, and energy exponent of a droplet, respectively. This formula is expected to apply to other glassy disordered systems, such as the random-field model and pinned interfaces. We make suggestions for further numerical investigations, as well as experimental studies of the Barkhausen noise in spin glasses.
The Quasi-Equilibrium-reduced α-Network
Hix, W. Raphael; Khokhlov, Alexei M.; Wheeler, J. Craig; Thielemann, Friedrich-Karl
1998-08-01
An examination of the process of silicon burning, the burning stage that leads to the production of the iron peak nuclei, reveals that the nuclear evolution is dominated by large groups of nuclei in mutual equilibrium. These quasi-equilibrium (QSE) groups form well in advance of the global nuclear statistical equilibrium (NSE). We present an improved ``minimal'' nuclear network, which takes advantage of QSE in order to calculate the nuclear evolution and energy generation while further reducing the computational cost compared with a conventional α-chain network. During silicon burning the resultant QSE-reduced α-network is twice as fast as the full α-network it replaces and requires the tracking of only half as many abundance variables, without significant loss of accuracy. When the QSE-reduced α-network is used in combination with a conventional α-network stretching from He to Si, the combined network, which we call the α7 network, provides an accurate approximation for all of the burning stages from He burning to NSE, while tracking only seven abundances. These reductions in computational cost and the number of species evolved make the α7 network well suited for inclusion within hydrodynamic simulations, particularly those in multidimension.
Accurate Critical Parameters for the Modified Lennard-Jones Model
Okamoto, Kazuma; Fuchizaki, Kazuhiro
2017-03-01
The critical parameters of the modified Lennard-Jones system were examined. The isothermal-isochoric ensemble was generated by conducting a molecular dynamics simulation for the system consisting of 6912, 8788, 10976, and 13500 particles. The equilibrium between the liquid and vapor phases was judged from the chemical potential of both phases upon establishing the coexistence envelope, from which the critical temperature and density were obtained invoking the renormalization group theory. The finite-size scaling enabled us to finally determine the critical temperature, pressure, and density as Tc = 1.0762(2), pc = 0.09394(17), and ρc = 0.331(3), respectively.
Liquid-liquid phase equilibrium of methanol + ethylbenzene + isooctane + ethanol system at 303 K
Gramajo, Mónica B.; Veliz, Jonatan H.; Cases, Alicia M.
2017-03-01
The phase equilibrium data for methanol + ethanol + isooctane systems were obtained at 303.15 K. Data for methanol + ethylbenzene + isooctane system were taken from literature. The effect of ethanol addition on the system equilibrium was investigated at the same temperature. The distribution curves for ternary and quaternary system was analyzed. The experimental results for ternary systems were correlated with UNIQUAC and NRTL equations. For the ternary systems studied here, the NRTL equation is more accurate than the UNIQUAC. The equilibrium data for the three ternary systems were used to determine interactions parameters for the UNIQUAC equation. For the quaternary system, the experimental data can be fitted more accurately to UNIQUAC equation than by the UNIFAC method.
First-principles modelling of scanning tunneling microscopy using non-equilibrium Green's functions
DEFF Research Database (Denmark)
Lin, H.P.; Rauba, J.M.C.; Thygesen, Kristian Sommer
2010-01-01
a novel STM simulation scheme based on non-equilibrium Green's functions (NEGF) and Wannier functions which is both accurate and very efficient. The main novelty of the scheme compared to the Bardeen and Tersoff-Hamann approaches is that the coupling to the infinite (macroscopic) electrodes is taken...
DEFF Research Database (Denmark)
Pawlowski, F; Jorgensen, P; Olsen, Jeppe
2002-01-01
-Fock vibration-rotation interaction constants have an accuracy similar to that obtained by a direct minimization of the CCSD(T) energy. The most accurate vibration-rotation interaction constants are those calculated at the CCSD(T)/cc-pVQZ level. The equilibrium bond distances determined from these interaction...
A More Accurate Fourier Transform
Courtney, Elya
2015-01-01
Fourier transform methods are used to analyze functions and data sets to provide frequencies, amplitudes, and phases of underlying oscillatory components. Fast Fourier transform (FFT) methods offer speed advantages over evaluation of explicit integrals (EI) that define Fourier transforms. This paper compares frequency, amplitude, and phase accuracy of the two methods for well resolved peaks over a wide array of data sets including cosine series with and without random noise and a variety of physical data sets, including atmospheric $\\mathrm{CO_2}$ concentrations, tides, temperatures, sound waveforms, and atomic spectra. The FFT uses MIT's FFTW3 library. The EI method uses the rectangle method to compute the areas under the curve via complex math. Results support the hypothesis that EI methods are more accurate than FFT methods. Errors range from 5 to 10 times higher when determining peak frequency by FFT, 1.4 to 60 times higher for peak amplitude, and 6 to 10 times higher for phase under a peak. The ability t...
Investigation of Multiscale Non-equilibrium Flow Dynamics Under External Force Field
Xiao, Tianbai
2016-01-01
The multiple scale non-equilibrium gaseous flow behavior under external force field is investigated. Both theoretical analysis based on the kinetic model equation and numerical study are presented to demonstrate the dynamic effect of external force on the flow evolution, especially on the non-equilibrium heat flux. The current numerical experiment is based on the well-balanced unified gas-kinetic scheme (UGKS), which presents accurate solutions in the whole flow regime from the continuum Navier-Stokes solution to the transition and free molecular ones. The heat conduction in the non-equilibrium regime due to the external forcing term is quantitatively investigated. In the lid-driven cavity flow study, due to the external force field the density distribution inside cavity gets stratified and a multiscale non-equilibrium flow transport appears in a single gas dynamic system. With the increment of external forcing term, the flow topological structure changes dramatically, and the temperature gradient, shearing s...
Institute of Scientific and Technical Information of China (English)
无
2007-01-01
A new numerical approach has been developed for vapor solid equilibrium calculations and for predicting vapor solid equilibrium constant and composition of vapor and solid phases in gas hydrate formation. Equation of state methods generally do a good job of determining vapor phase properties,but for solid phase it is much more difficult and inaccurate. This proposed new model calculates vapor solid equilibrium constant and vapor and solid phase composition as a function of temperature and partial pressure. The results of this proposed numerical approach, for vapor solid equilibrium, have a good agreement with the available reported data. This new numerical model also has an advantage to tune coefficients, to cover different sets of experimental data accurately.
DEFF Research Database (Denmark)
Jahnke, Annika; MacLeod, Matthew; Wickström, Håkan
2014-01-01
Equilibrium partitioning (EqP) theory is currently the most widely used approach for linking sediment pollution by persistent hydrophobic organic chemicals to bioaccumulation. Most applications of the EqP approach assume (I) a generic relationship between organic carbon-normalized chemical...... chemical concentrations in the silicone, and applying lipid/silicone partition ratios to yield concentrations in lipid at thermodynamic equilibrium with the sediment (CLip⇌Sed). Furthermore, we evaluated the validity of assumption II by comparing CLip⇌Sed of selected persistent, bioaccumulative and toxic...... pollutants (polychlorinated biphenyls (PCBs) and hexachlorobenzene (HCB)) to lipid-normalized concentrations for a range of biota from a Swedish background lake. PCBs in duck mussels, roach, eel, pikeperch, perch and pike were mostly below the equilibrium partitioning level relative to the sediment, i...
Silicone passive equilibrium samplers as ‘chemometers’ in eels and sediments of a Swedish lake
DEFF Research Database (Denmark)
Jahnke, Annika; Mayer, Philipp; McLachlan, Michael S.
2014-01-01
Passive equilibrium samplers deployed in two or more media of a system and allowed to come to equilibrium can be viewed as ‘chemometers’ that reflect the difference in chemical activities of contaminants between the media. We applied silicone-based equilibrium samplers to measure relative chemical...... activities of seven ‘indicator’ polychlorinated biphenyls (PCBs) and hexachlorobenzene in eels and sediments from a Swedish lake. Chemical concentrations in eels and sediments were also measured using exhaustive extraction methods. Lipid-normalized concentrations in eels were higher than organic carbon...... ratios is consistent with the sorptive capacity of lipids exceeding that of sediment organic carbon from this ecosystem by up to 50-fold. Factors that may contribute to the elevated activity in sediments are discussed, including slower response of sediments than water to reduced emissions, sediment...
Non-equilibrium modelling of distillation
Wesselingh, JA; Darton, R
1997-01-01
There are nasty conceptual problems in the classical way of describing distillation columns via equilibrium stages, and efficiencies or HETP's. We can nowadays avoid these problems by simulating the behaviour of a complete column in one go using a non-equilibrium model. Such a model has phase
Approximate Equilibrium Problems and Fixed Points
Directory of Open Access Journals (Sweden)
H. Mazaheri
2013-01-01
Full Text Available We find a common element of the set of fixed points of a map and the set of solutions of an approximate equilibrium problem in a Hilbert space. Then, we show that one of the sequences weakly converges. Also we obtain some theorems about equilibrium problems and fixed points.
The Geometry of Finite Equilibrium Datasets
DEFF Research Database (Denmark)
Balasko, Yves; Tvede, Mich
We investigate the geometry of finite datasets defined by equilibrium prices, income distributions, and total resources. We show that the equilibrium condition imposes no restrictions if total resources are collinear, a property that is robust to small perturbations. We also show that the set...
Equilibrium Tail Distribution Due to Touschek Scattering
Energy Technology Data Exchange (ETDEWEB)
Nash,B.; Krinsky, S.
2009-05-04
Single large angle Coulomb scattering is referred to as Touschek scattering. In addition to causing particle loss when the scattered particles are outside the momentum aperture, the process also results in a non-Gaussian tail, which is an equilibrium between the Touschek scattering and radiation damping. Here we present an analytical calculation for this equilibrium distribution.
Zeroth Law, Entropy, Equilibrium, and All That
Canagaratna, Sebastian G.
2008-01-01
The place of the zeroth law in the teaching of thermodynamics is examined in the context of the recent discussion by Gislason and Craig of some problems involving the establishment of thermal equilibrium. The concept of thermal equilibrium is introduced through the zeroth law. The relation between the zeroth law and the second law in the…
System of Operator Quasi Equilibrium Problems
Directory of Open Access Journals (Sweden)
Suhel Ahmad Khan
2014-01-01
Full Text Available We consider a system of operator quasi equilibrium problems and system of generalized quasi operator equilibrium problems in topological vector spaces. Using a maximal element theorem for a family of set-valued mappings as basic tool, we derive some existence theorems for solutions to these problems with and without involving Φ-condensing mappings.
Zeroth Law, Entropy, Equilibrium, and All That
Canagaratna, Sebastian G.
2008-01-01
The place of the zeroth law in the teaching of thermodynamics is examined in the context of the recent discussion by Gislason and Craig of some problems involving the establishment of thermal equilibrium. The concept of thermal equilibrium is introduced through the zeroth law. The relation between the zeroth law and the second law in the…
Equilibrium reconstruction in the TCA/Br tokamak; Reconstrucao do equilibrio no tokamak TCA/BR
Energy Technology Data Exchange (ETDEWEB)
Sa, Wanderley Pires de
1996-12-31
The accurate and rapid determination of the Magnetohydrodynamic (MHD) equilibrium configuration in tokamaks is a subject for the magnetic confinement of the plasma. With the knowledge of characteristic plasma MHD equilibrium parameters it is possible to control the plasma position during its formation using feed-back techniques. It is also necessary an on-line analysis between successive discharges to program external parameters for the subsequent discharges. In this work it is investigated the MHD equilibrium configuration reconstruction of the TCA/BR tokamak from external magnetic measurements, using a method that is able to fast determine the main parameters of discharge. The thesis has two parts. Firstly it is presented the development of an equilibrium code that solves de Grad-Shafranov equation for the TCA/BR tokamak geometry. Secondly it is presented the MHD equilibrium reconstruction process from external magnetic field and flux measurements using the Function Parametrization FP method. this method. This method is based on the statistical analysis of a database of simulated equilibrium configurations, with the goal of obtaining a simple relationship between the parameters that characterize the equilibrium and the measurements. The results from FP are compared with conventional methods. (author) 68 refs., 31 figs., 16 tabs.
Energy Technology Data Exchange (ETDEWEB)
Cannon, Cody [Univ. of Idaho, Idaho Falls, ID (United States). Center for Advanced Studies; Wood, Thomas [Univ. of Idaho, Idaho Falls, ID (United States). Center for Advanced Studies; Neupane, Ghanashyam [Idaho National Lab. (INL), Idaho Falls, ID (United States). Center for Advanced Studies; McLing, Travis [Idaho National Lab. (INL), Idaho Falls, ID (United States). Center for Advanced Studies; Mattson, Earl [Idaho National Lab. (INL), Idaho Falls, ID (United States); Dobson, Patrick [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Conrad, Mark [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
2014-10-01
The Eastern Snake River Plain (ESRP) is an area of high regional heat flux due the movement of the North American Plate over the Yellowstone Hotspot beginning ca.16 Ma. Temperature gradients between 45-60 °C/km (up to double the global average) have been calculated from deep wells that penetrate the upper aquifer system (Blackwell 1989). Despite the high geothermal potential, thermal signatures from hot springs and wells are effectively masked by the rapid flow of cold groundwater through the highly permeable basalts of the Eastern Snake River Plain aquifer (ESRPA) (up to 500+ m thick). This preliminary study is part of an effort to more accurately predict temperatures of the ESRP deep thermal reservoir while accounting for the effects of the prolific cold water aquifer system above. This study combines the use of traditional geothermometry, mixing models, and a multicomponent equilibrium geothermometry (MEG) tool to investigate the geothermal potential of the ESRP. In March, 2014, a collaborative team including members of the University of Idaho, the Idaho National Laboratory, and the Lawrence Berkeley National Laboratory collected 14 thermal water samples from and adjacent to the Eastern Snake River Plain. The preliminary results of chemical analyses and geothermometry applied to these samples are presented herein.
Quantum cluster equilibrium model of N-methylformamide–water binary mixtures
Energy Technology Data Exchange (ETDEWEB)
Domaros, Michael von; Kirchner, Barbara, E-mail: kirchner@thch.uni-bonn.de [Mulliken Center for Theoretical Chemistry, Universität Bonn, Beringstr. 4, D-53115 Bonn (Germany); Jähnigen, Sascha [Martin-Luther-Universität Halle-Wittenberg, von-Danckelmann-Platz 4, D-06120 Halle (Germany); Friedrich, Joachim [Technische Universität Chemnitz, Straße der Nationen 62, D-09111 Chemnitz (Germany)
2016-02-14
The established quantum cluster equilibrium (QCE) approach is refined and applied to N-methylformamide (NMF) and its aqueous solution. The QCE method is split into two iterative cycles: one which converges to the liquid phase solution of the QCE equations and another which yields the gas phase. By comparing Gibbs energies, the thermodynamically stable phase at a given temperature and pressure is then chosen. The new methodology avoids metastable solutions and allows a different treatment of the mean-field interactions within the gas and liquid phases. These changes are of crucial importance for the treatment of binary mixtures. For the first time in a QCE study, the cis-trans-isomerism of a species (NMF) is explicitly considered. Cluster geometries and frequencies are calculated using density functional theory (DFT) and complementary coupled cluster single point energies are used to benchmark the DFT results. Independent of the selected quantum-chemical method, a large set of clusters is required for an accurate thermodynamic description of the binary mixture. The liquid phase of neat NMF is found to be dominated by the cyclic trans-NMF pentamer, which can be interpreted as a linear trimer that is stabilized by explicit solvation of two further NMF molecules. This cluster reflects the known hydrogen bond network preferences of neat NMF.
Generalized quantum master equations in and out of equilibrium: When can one win?
Kelly, Aaron; Montoya-Castillo, Andrés; Wang, Lu; Markland, Thomas E.
2016-05-01
Generalized quantum master equations (GQMEs) are an important tool in modeling chemical and physical processes. For a large number of problems, it has been shown that exact and approximate quantum dynamics methods can be made dramatically more efficient, and in the latter case more accurate, by proceeding via the GQME formalism. However, there are many situations where utilizing the GQME approach with an approximate method has been observed to return the same dynamics as using that method directly. Here, for systems both in and out of equilibrium, we provide a more detailed understanding of the conditions under which using an approximate method can yield benefits when combined with the GQME formalism. In particular, we demonstrate the necessary manipulations, which are satisfied by exact quantum dynamics, that are required to recast the memory kernel in a form that can be analytically shown to yield the same result as a direct application of the dynamics regardless of the approximation used. By considering the connections between these forms of the kernel, we derive the conditions that approximate methods must satisfy if they are to offer different results when used in conjunction with the GQME formalism. These analytical results thus provide new insights as to when proceeding via the GQME approach can be used to improve the accuracy of simulations.
Economic networks in and out of equilibrium
Squartini, Tiziano
2013-01-01
Economic and financial networks play a crucial role in various important processes, including economic integration, globalization, and financial crises. Of particular interest is understanding whether the temporal evolution of a real economic network is in a (quasi-)stationary equilibrium, i.e. characterized by smooth structural changes rather than abrupt transitions. Smooth changes in quasi-equilibrium networks can be generally controlled for, and largely predicted, via an appropriate rescaling of structural quantities, while this is generally not possible for abrupt transitions in non-stationary networks. Here we study whether real economic networks are in or out of equilibrium by checking their consistency with quasi-equilibrium maximum-entropy ensembles of graphs. As illustrative examples, we consider the International Trade Network (ITN) and the Dutch Interbank Network (DIN). We show that, despite the globalization process, the ITN is an almost perfect example of quasi-equilibrium network, while the DIN ...
Cosmological particle production and generalized thermodynamic equilibrium
Zimdahl, W
1998-01-01
With the help of a conformal, timelike Killing-vector we define generalized equilibrium states for cosmological fluids with particle production. For massless particles the generalized equilibrium conditions require the production rate to vanish and the well known ``global'' equilibrium of standard relativistic thermodynamics is recovered as a limiting case. The equivalence between the creation rate for particles with nonzero mass and an effective viscous fluid pressure follows as a consequence of the generalized equilibrium properties. The implications of this equivalence for the cosmological dynamics are discussed, including the possibility of a power-law inflationary behaviour. For a simple gas a microscopic derivation for such kind of equilibrium is given on the basis of relativistic kinetic theory.
Disturbances in equilibrium function after major earthquake
Honma, Motoyasu; Endo, Nobutaka; Osada, Yoshihisa; Kim, Yoshiharu; Kuriyama, Kenichi
2012-10-01
Major earthquakes were followed by a large number of aftershocks and significant outbreaks of dizziness occurred over a large area. However it is unclear why major earthquake causes dizziness. We conducted an intergroup trial on equilibrium dysfunction and psychological states associated with equilibrium dysfunction in individuals exposed to repetitive aftershocks versus those who were rarely exposed. Greater equilibrium dysfunction was observed in the aftershock-exposed group under conditions without visual compensation. Equilibrium dysfunction in the aftershock-exposed group appears to have arisen from disturbance of the inner ear, as well as individual vulnerability to state anxiety enhanced by repetitive exposure to aftershocks. We indicate potential effects of autonomic stress on equilibrium function after major earthquake. Our findings may contribute to risk management of psychological and physical health after major earthquakes with aftershocks, and allow development of a new empirical approach to disaster care after such events.
Conjectural Equilibrium in Water-filling Games
Su, Yi
2008-01-01
This paper considers a non-cooperative game in which competing users sharing a frequency-selective interference channel selfishly optimize their power allocation in order to improve their achievable rates. Previously, it was shown that a user having the knowledge of its opponents' channel state information can make foresighted decisions and substantially improve its performance compared with the case in which it deploys the conventional iterative water-filling algorithm, which does not exploit such knowledge. This paper discusses how a foresighted user can acquire this knowledge by modeling its experienced interference as a function of its own power allocation. To characterize the outcome of the multi-user interaction, the conjectural equilibrium is introduced, and the existence of this equilibrium for the investigated water-filling game is proved. Interestingly, both the Nash equilibrium and the Stackelberg equilibrium are shown to be special cases of the generalization of conjectural equilibrium. We develop...
Raff, Lionel M.
2014-01-01
The fundamental criteria for chemical reactions to be spontaneous in a given direction are generally incorrectly stated as ?G chemistry textbooks and even in some more advanced texts. Similarly, the criteria for equilibrium are also misstated as being ?G = 0 or ?A = 0. Following a brief review of the…
Ethanol reforming in non-equilibrium plasma of glow discharge
Levko, D
2012-01-01
The results of a detailed kinetic study of the main plasma chemical processes in non-equilibrium ethanol/argon plasma are presented. It is shown that at the beginning of the discharge the molecular hydrogen is mainly generated in the reaction of ethanol H-abstraction. Later hydrogen is formed from active H, CH2OH and CH3CHOH and formaldehyde. Comparison with experimental data has shown that the used kinetic mechanism predicts well the concentrations of main species at the reactor outlet.
Directory of Open Access Journals (Sweden)
Phan Quoc Khanh
2014-01-01
Full Text Available The purpose of this paper is introduce several types of Levitin-Polyak well-posedness for bilevel vector equilibrium and optimization problems with equilibrium constraints. Base on criterion and characterizations for these types of Levitin-Polyak well-posedness we argue on diameters and Kuratowski’s, Hausdorff’s, or Istrǎtescus measures of noncompactness of approximate solution sets under suitable conditions, and we prove the Levitin-Polyak well-posedness for bilevel vector equilibrium and optimization problems with equilibrium constraints. Obtain a gap function for bilevel vector equilibrium problems with equilibrium constraints using the nonlinear scalarization function and consider relations between these types of LP well-posedness for bilevel vector optimization problems with equilibrium constraints and these types of Levitin-Polyak well-posedness for bilevel vector equilibrium problems with equilibrium constraints under suitable conditions; we prove the Levitin-Polyak well-posedness for bilevel equilibrium and optimization problems with equilibrium constraints.
Equilibrium morphologies and effective spring constants of capillary bridges.
Kusumaatmaja, Halim; Lipowsky, Reinhard
2010-12-21
We theoretically study the behavior of a liquid bridge formed between a pair of rigid and parallel plates. The plates are smooth, they may either be homogeneous or decorated by circular patches of more hydrophilic domains, and they are generally not identical. We calculate the mechanical equilibrium distance of the liquid bridge as a function of liquid volume, contact angle, and radius of the chemical domain. We show that a liquid bridge can be an equilibrium configuration as long as the sum of the contact angles at the two walls is larger than 180°. When comparisons are possible, our results agree well with recent analytical and molecular dynamics simulation results. We also derive the effective spring constant of the liquid bridge as it is perturbed from its equilibrium distance. The spring constant diverges when the sum of the contact angles is 180° and is finite otherwise. The value of the spring constant decreases with increasing contact angle and volume, and the rate at which it decreases depends strongly on the properties of the two plates.
The Equilibrium Compositions of Methanol Synthesis System by Cornstalk Syngas
Zhu, Ling-feng; Zhao, Qing-ling; Wang, Yang-yang; Chen, Jing; Zhang, Le; Zhang, Run-tao; Liu, Li-li; Zhang, Zhao-yue
2010-11-01
Methanol can be used as a promising alternative for conventional gasoline and Diesel fuel. It is necessary to decompose biomass such as cornstalks in order to produce methanol which is a raw material from agricultural residues. A promising route for processing cornstalks is firstly to gasify cornstalks with thermo-chemical method to prepare the syngas, which can be conducted under a down-flow fixed bed gasifier. The low-heat-value cornstalk syngas produced in this way needs purification and a variety of technical procedures such as deoxygenation, desulfurization, catalytic cracking of tar and hydrogenation. In this paper, the catalytic experiments of methanol synthesis with cornstalk syngas were carried out in a tubular-flow integral and isothermal reactor. The effect such as reaction temperature, pressure, catalyst types, catalyst particle size, syngas flow at entering end and composition of syngas was investigated. Moreover, the equilibrium constants (Kf1, Kf2, KP1, KP2), equilibrium compositions and the concentrations of each part of the equilibrium system for methanol synthesis were calculated by SHBWR state equation under given reaction pressure. The results provided basic data for the design of the industrial equipments in which catalyzed synthesis of methanol from cornstalk gases is operated.
Lateral interactions and non-equilibrium in surface kinetics
Menzel, Dietrich
2016-08-01
Work modelling reactions between surface species frequently use Langmuir kinetics, assuming that the layer is in internal equilibrium, and that the chemical potential of adsorbates corresponds to that of an ideal gas. Coverage dependences of reacting species and of site blocking are usually treated with simple power law coverage dependences (linear in the simplest case), neglecting that lateral interactions are strong in adsorbate and co-adsorbate layers which may influence kinetics considerably. My research group has in the past investigated many co-adsorbate systems and simple reactions in them. We have collected a number of examples where strong deviations from simple coverage dependences exist, in blocking, promoting, and selecting reactions. Interactions can range from those between next neighbors to larger distances, and can be quite complex. In addition, internal equilibrium in the layer as well as equilibrium distributions over product degrees of freedom can be violated. The latter effect leads to non-equipartition of energy over molecular degrees of freedom (for products) or non-equal response to those of reactants. While such behavior can usually be described by dynamic or kinetic models, the deeper reasons require detailed theoretical analysis. Here, a selection of such cases is reviewed to exemplify these points.
Electric Current Equilibrium in the Corona
Filippov, Boris
2013-01-01
A hyperbolic flux-tube configuration containing a null point below the flux rope is considered as a pre-eruptive state of coronal mass ejections that start simultaneously with flares. We demonstrate that this configuration is unstable and cannot exist for a long time in the solar corona. The inference follows from general equilibrium conditions and from analyzing simple models of the flux-rope equilibrium. A direct consequence of the stable flux-rope equilibrium in the corona are separatrices in the horizontal-field distribution in the chromosphere. They can be recognized as specific "herring-bone structures" in a chromospheric fibril pattern.
Electric Current Equilibrium in the Corona
Filippov, Boris
2013-04-01
A hyperbolic flux-tube configuration containing a null point below the flux rope is considered as a pre-eruptive state of coronal mass ejections that start simultaneously with flares. We demonstrate that this configuration is unstable and cannot exist for a long time in the solar corona. The inference follows from general equilibrium conditions and from analyzing simple models of the flux-rope equilibrium. A direct consequence of the stable flux-rope equilibrium in the corona are separatrices in the horizontal-field distribution in the chromosphere. They can be recognized as specific "herring-bone structures" in a chromospheric fibril pattern.
A Multi Period Equilibrium Pricing Model
Pirvu, Traian A
2012-01-01
In this paper, we propose an equilibrium pricing model in a dynamic multi-period stochastic framework with uncertain income streams. In an incomplete market, there exist two traded risky assets (e.g. stock/commodity and weather derivative) and a non-traded underlying (e.g. temperature). The risk preferences are of exponential (CARA) type with a stochastic coefficient of risk aversion. Both time consistent and time inconsistent trading strategies are considered. We obtain the equilibriums prices of a contingent claim written on the risky asset and non-traded underlying. By running numerical experiments we examine how the equilibriums prices vary in response to changes in model parameters.
THE STABILITY OF LIQUID EVAPORATION EQUILIBRIUM
SHIMIN ZHANG
2005-01-01
For the evaporation of the pure liquid under the condition of constant temperature and constant external pressure, the phase equilibrium of the liquid vapor in the bubble and the liquid outside the bubble is always a kind of stable equilibrium whether there is air or not in the bubble. If there is no air in the bubble, the bubble and liquid cannot coexist in the mechanical equilibrium when the vapor pressure of the liquid in the bubble is less than or equal to the external pressure; the bubbl...
Molecular Thermodynamics for Chemical Process Design
Prausnitz, J. M.
1976-01-01
Discusses that aspect of thermodynamics which is particularly important in chemical process design: the calculation of the equilibrium properties of fluid mixtures, especially as required in phase-separation operations. (MLH)
Out-of-equilibrium phenomena and Transport in Cold Atoms
Giamarchi, Thierry
Transport of particle or charge current between two reservoirs is one of the most studied phenomenon in the context of condensed matter. Despite its apparent simplicity this phenomenon is in fact a case of an out of equilibrium situation requiring in principle new theoretical tools and concepts for its solution. One way to sweep the difficulty under the rug has been usually to tackle this problem in the linear response, where one can come back to the comfortable case of equilibrium. There are however many cases when the linear response is not enough and when a full solution of the non-equilibrium problem is needed. This is in particular the case for quantum point contacts or junctions where the full current-voltage characteristics gives direct information on the physics of the problem. In the recent years, in complement to condensed matter experimental realizations, due to the full control on the parameters of the problem and the fact that they realize isolated quantum systems cold atoms have proven a fantastic laboratory to produce out of equilibrium situations. This ranges from the case of quenches, to more recently via experiments of the ETHZ group to the case of real transport between reservoirs. This experimental activity has in turn thus stimulated strongly theoretical developments in this field. I will discuss in this talk some of the recent advances and realizations both at the experimental and of course the theoretical level. I will in particular focus on a recent study which was able to realize a tunable, ballistic quantum point contact between two fermi reservoirs with a tunable interaction allowing to reach unitarity and to provide a theoretical description of the out-of equilibrium corresponding problem. In such a system the current has been shown to originate from multiple Andreev reflections which leads to a very non-linear current-chemical potential characteristics. The geometry of the contact can be changed showing a competition between
38 CFR 4.46 - Accurate measurement.
2010-07-01
... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Accurate measurement. 4... RATING DISABILITIES Disability Ratings The Musculoskeletal System § 4.46 Accurate measurement. Accurate measurement of the length of stumps, excursion of joints, dimensions and location of scars with respect...
Institute of Scientific and Technical Information of China (English)
张志禹; 胡中桥; 杨基础; 李以圭
2002-01-01
Three calculational models, statistical associating fluid theory (SAFT), modified SAFT, and Boublík-Alder-Chen-Kreglewshi (BACK) are compared for supercritical CO2-C2H5OH using a set of van der Waals type mixing rules for both the BACK equation of state (EOS) and the SAFT EOS. Equations are presented for the residual Helmholtz free energy, residual chemical potentials, and compressibilty factor for mixtures. A comparison with experimental vapor-liquid equilibrium (VLE) data reveals that the BACK EOS together with the suggested mixing rules provides more accurate prediction of the binary system than the SAFT or the modified SAFT model with no adjustable binary parameters. The correlation results are improved with an adjustable parameter.
New Thermodynamic Paradigm of Chemical Equilibria
Zilbergleyt, B
2011-01-01
The paper presents new thermodynamic paradigm of chemical equilibrium, setting forth comprehensive basics of Discrete Thermodynamics of Chemical Equilibria (DTd). Along with previous results by the author during the last decade, this work contains also some new developments of DTd. Based on the Onsager's constitutive equations, reformulated by the author thermodynamic affinity and reaction extent, and Le Chatelier's principle, DTd brings forward a notion of chemical equilibrium as a balance of internal and external thermodynamic forces (TdF), acting against a chemical system. Basic expression of DTd is the chemical system logistic map of thermodynamic states that ties together energetic characteristics of chemical reaction, occurring in the system, the system shift from "true" thermodynamic equilibrium (TdE), and causing that shift external thermodynamic forces. Solutions to the basic map are pitchfork bifurcation diagrams in coordinates "shift from TdE - growth factor (or TdF)"; points, corresponding to the ...
Manginell, Ronald P; Moorman, Matthew W; Wheeler, David R
2014-05-27
A microfabricated capacitive chemical sensor can be used as an autonomous chemical sensor or as an analyte-sensitive chemical preconcentrator in a larger microanalytical system. The capacitive chemical sensor detects changes in sensing film dielectric properties, such as the dielectric constant, conductivity, or dimensionality. These changes result from the interaction of a target analyte with the sensing film. This capability provides a low-power, self-heating chemical sensor suitable for remote and unattended sensing applications. The capacitive chemical sensor also enables a smart, analyte-sensitive chemical preconcentrator. After sorption of the sample by the sensing film, the film can be rapidly heated to release the sample for further analysis. Therefore, the capacitive chemical sensor can optimize the sample collection time prior to release to enable the rapid and accurate analysis of analytes by a microanalytical system.
Effect of Ultrasound on Desorption Equilibrium
Institute of Scientific and Technical Information of China (English)
秦炜; 原永辉; 戴猷元
2001-01-01
Effects of ultrasound on intensification of separation process were investigated through the experiment of desorption equilibrium behavior. Tri-butyl phosphate (TBP) on NKA-X resin and phenol on a solvent impregnated resin, CL-TBP resin, were used for desorption processes. The desorption rate was measured with and without ultrasound. Desorption equilibrium was studied under various ultrasonic power densities or thermal infusion. Results showed that the desorption rate with ultrasound was much higher than that with normal thermal infusion. Both ultrasound and thermal infusion broke the desorption equilibrium existed at room temperature. However, after the systems were cooled down, the amount of solute desorbed in the liquid phase in the presence of ultrasound was much higher than that at the temperature corresponding to the same ultrasound power. It is proved that the initial desorption equilibrium was broken as a result of the spot energy effect of ultrasound.
Equilibrium Analysis for Anycast in WDM Networks
Institute of Scientific and Technical Information of China (English)
唐矛宁; 王汉兴
2005-01-01
In this paper, the wavelength-routed WDM network, was analyzed for the dynamic case where the arrival of anycast requests was modeled by a state-dependent Poisson process. The equilibrium analysis was also given with the UWNC algorithm.
POSITIVE EQUILIBRIUM SOLUTIONS OF SEMILINEAR PARABOLIC EQUATIONS
Institute of Scientific and Technical Information of China (English)
无
2006-01-01
The author studies semilinear parabolic equations with initial and periodic boundary value conditions. In the presence of non-well-ordered sub- and super-solutions:"subsolution (≤) supersolution", the existence and stability/instability of equilibrium solutions are obtained.
Closure conditions for non-equilibrium multi-component models
Müller, S.; Hantke, M.; Richter, P.
2016-07-01
A class of non-equilibrium models for compressible multi-component fluids in multi-dimensions is investigated taking into account viscosity and heat conduction. These models are subject to the choice of interfacial pressures and interfacial velocity as well as relaxation terms for velocity, pressure, temperature and chemical potentials. Sufficient conditions are derived for these quantities that ensure meaningful physical properties such as a non-negative entropy production, thermodynamical stability, Galilean invariance and mathematical properties such as hyperbolicity, subcharacteristic property and existence of an entropy-entropy flux pair. For the relaxation of chemical potentials, a two-component and a three-component models for vapor-water and gas-water-vapor, respectively, are considered.
Equilibrium fluctuation energy of gyrokinetic plasma
Energy Technology Data Exchange (ETDEWEB)
Krommes, J.A.; Lee, W.W.; Oberman, C.
1985-11-01
The thermal equilibrium electric field fluctuation energy of the gyrokinetic model of magnetized plasma is computed, and found to be smaller than the well-known result
Information equilibrium as an economic principle
2015-01-01
A general information equilibrium model in the case of ideal information transfer is defined and then used to derive the relationship between supply (information destination) and demand (information source) with the price as the detector of information exchange between demand and supply. We recover the properties of the traditional economic supply-demand diagram. Information equilibrium is then applied to macroeconomic problems, recovering some common macroeconomic models in particular limits...
OPTIMAL RESOURCE ALLOCATION IN GENERAL COURNOTCOMPETITIVE EQUILIBRIUM
Ervik, Inger Sommerfelt; Soegaard, Christian
2013-01-01
Conventional economic theory stipulates that output in Cournot competition is too low relative to that which is attained in perfect competition. We revisit this result in a General Cournot-competitive Equilibrium model with two industries that di er only in terms of productivity. We show that in general equilibrium, the more ecient industry produces too little and the less ecient industry produces too much compared to an optimal scenario with perfect competition.
Accurate Element of Compressive Bar considering the Effect of Displacement
Directory of Open Access Journals (Sweden)
Lifeng Tang
2015-01-01
Full Text Available By constructing the compressive bar element and developing the stiffness matrix, most issues about the compressive bar can be solved. In this paper, based on second derivative to the equilibrium differential governing equations, the displacement shape functions are got. And then the finite element formula of compressive bar element is developed by using the potential energy principle and analytical shape function. Based on the total potential energy variation principle, the static and geometrical stiffness matrices are proposed, in which the large deformation of compressive bar is considered. To verify the accurate and validity of the analytical trial function element proposed in this paper, a number of the numerical examples are presented. Comparisons show that the proposed element has high calculation efficiency and rapid speed of convergence.
Accurate bond dissociation energies (D 0) for FHF- isotopologues
Stein, Christopher; Oswald, Rainer; Sebald, Peter; Botschwina, Peter; Stoll, Hermann; Peterson, Kirk A.
2013-09-01
Accurate bond dissociation energies (D 0) are determined for three isotopologues of the bifluoride ion (FHF-). While the zero-point vibrational contributions are taken from our previous work (P. Sebald, A. Bargholz, R. Oswald, C. Stein, P. Botschwina, J. Phys. Chem. A, DOI: 10.1021/jp3123677), the equilibrium dissociation energy (D e ) of the reaction ? was obtained by a composite method including frozen-core (fc) CCSD(T) calculations with basis sets up to cardinal number n = 7 followed by extrapolation to the complete basis set limit. Smaller terms beyond fc-CCSD(T) cancel each other almost completely. The D 0 values of FHF-, FDF-, and FTF- are predicted to be 15,176, 15,191, and 15,198 cm-1, respectively, with an uncertainty of ca. 15 cm-1.
An analytical model of crater count equilibrium
Hirabayashi, Masatoshi; Minton, David A.; Fassett, Caleb I.
2017-06-01
Crater count equilibrium occurs when new craters form at the same rate that old craters are erased, such that the total number of observable impacts remains constant. Despite substantial efforts to understand this process, there remain many unsolved problems. Here, we propose an analytical model that describes how a heavily cratered surface reaches a state of crater count equilibrium. The proposed model formulates three physical processes contributing to crater count equilibrium: cookie-cutting (simple, geometric overlap), ejecta-blanketing, and sandblasting (diffusive erosion). These three processes are modeled using a degradation parameter that describes the efficiency for a new crater to erase old craters. The flexibility of our newly developed model allows us to represent the processes that underlie crater count equilibrium problems. The results show that when the slope of the production function is steeper than that of the equilibrium state, the power law of the equilibrium slope is independent of that of the production function slope. We apply our model to the cratering conditions in the Sinus Medii region and at the Apollo 15 landing site on the Moon and demonstrate that a consistent degradation parameterization can successfully be determined based on the empirical results of these regions. Further developments of this model will enable us to better understand the surface evolution of airless bodies due to impact bombardment.
3-D Equilibrium Reconstruction in the HSX Stellarator
Schmitt, J. C.
2011-10-01
Axisymmetric toroidal devices reconstruct the MHD equilibrium properties from measured pressure, magnetic field components, external field coil currents, and other diagnostics, by solving the Grad-Shafranov equation. For modern toroidal systems including advanced stellarators and tokamaks with asymmetric fields, such as those that arise from finite toroidal ripple or ferromagnetic blanket materials, a 3-D equilibrium reconstruction is required to account for non-axisymmetric effects and accurately determine the plasma profiles. The 3-D equilibrium reconstruction of plasma current and pressure profiles in the quasi-helically symmetric stellarator HSX is presented. The equilibrium currents in the HSX stellarator are measured with a set of magnetic diagnostics, which includes Rogowski coils, diamagnetic loops, two poloidal `belts' that are separated by 1/3 of a field period, and internal coils. Each belt consists of 16 3-axis magnetic pick-up coils to measure the local magnetic field, and 15 internal coils measure the poloidal field. V3FIT, a 3-D equilibrium reconstruction code, is used to reconstruct the pressure and current profile from the measured fields and fluxes. Reconstructions based on the external diagnostics confirm that the Pfirsch-Schlüter current is helical due to the lack of toroidal curvature in HSX. The reconstruction of the pressure profile and stored energy based on the internal poloidal array agrees well with that measured by Thomson scattering and the flux loop. Later in time, the measurements are dominated by the bootstrap current which rises on a timescale comparable to the length of the discharge. The reconstruction of the current profile is consistent with the neoclassical bootstrap current when the effects of momentum conservation between plasma species and the 3-D inductive response of the plasma column are considered. The magnitude of the Pfirsch-Schlüter and bootstrap currents are reduced by the high effective transform (~3), which is
Analysis of non-equilibrium phenomena in inductively coupled plasma generators
Zhang, W.; Lani, A.; Panesi, M.
2016-07-01
This work addresses the modeling of non-equilibrium phenomena in inductively coupled plasma discharges. In the proposed computational model, the electromagnetic induction equation is solved together with the set of Navier-Stokes equations in order to compute the electromagnetic and flow fields, accounting for their mutual interaction. Semi-classical statistical thermodynamics is used to determine the plasma thermodynamic properties, while transport properties are obtained from kinetic principles, with the method of Chapman and Enskog. Particle ambipolar diffusive fluxes are found by solving the Stefan-Maxwell equations with a simple iterative method. Two physico-mathematical formulations are used to model the chemical reaction processes: (1) A Local Thermodynamics Equilibrium (LTE) formulation and (2) a thermo-chemical non-equilibrium (TCNEQ) formulation. In the TCNEQ model, thermal non-equilibrium between the translational energy mode of the gas and the vibrational energy mode of individual molecules is accounted for. The electronic states of the chemical species are assumed in equilibrium with the vibrational temperature, whereas the rotational energy mode is assumed to be equilibrated with translation. Three different physical models are used to account for the coupling of chemistry and energy transfer processes. Numerical simulations obtained with the LTE and TCNEQ formulations are used to characterize the extent of non-equilibrium of the flow inside the Plasmatron facility at the von Karman Institute. Each model was tested using different kinetic mechanisms to assess the sensitivity of the results to variations in the reaction parameters. A comparison of temperatures and composition profiles at the outlet of the torch demonstrates that the flow is in non-equilibrium for operating conditions characterized by pressures below 30 000 Pa, frequency 0.37 MHz, input power 80 kW, and mass flow 8 g/s.
Lubineau, Gilles
2011-04-01
New identification strategies have to be developed in order to perform the identification quickly and at very-low cost. A popular class of approaches relies on full-field measurement obtained through digital image correlation. We propose here a global equilibrium approach. It is based on the virtual field method in case specific virtual fields are used. It can also be seen as a generalization of the equilibrium gap method. This approach is easy to implement and we prove that it provides better or comparable results to the constitutive equation gap method that is known to be a very accurate reference. © 2010 Elsevier B.V.
Schäfer, Harald
2013-01-01
Chemical Transport Reactions focuses on the processes and reactions involved in the transport of solid or liquid substances to form vapor phase reaction products. The publication first offers information on experimental and theoretical principles and the transport of solid substances and its special applications. Discussions focus on calculation of the transport effect of heterogeneous equilibria for a gas motion between equilibrium spaces; transport effect and the thermodynamic quantities of the transport reaction; separation and purification of substances by means of material transport; and
Chemical Thermodynamics on Mars
Selco, Jodye I.
1995-07-01
This seven question take-home exam guides the students through a marathon problem to arrive at a single answer to the overall question: "How sensitive a probe do you need in order to detect signs of "life" (methane produced by bacteria instead of by chemical equilibrium) on Mars". This exam was originally written to correspond to chapters four through seven in Ira Levine's Physical Chemistry, 3rd edition, McGraw Hill, New York, 1988.
Consistent simulations of substellar atmospheres and non-equilibrium dust-cloud formation
Helling, Christiane; Woitke, Peter; Hauschildt, Peter H
2008-01-01
We aim to understand cloud formation in substellar objects. We combined the non-equilibrium, stationary cloud model of Helling, Woitke & Thi (2008; seed formation, growth, evaporation, gravitational settling, element conservation) with the general-purpose model atmosphere code PHOENIX (radiative transfer, hydrostatic equilibrium, mixing length theory, chemical equilibrium) in order to consistently calculate cloud formation and radiative transfer with their feedback on convection and gas phase depletion. We calculate the complete 1D model atmosphere structure and the chemical details of the cloud layers. The DRIFT-PHOENIX models enable the first stellar atmosphere simulation that is based on the actual cloud formation process. The resulting (T,p) profiles differ considerably from the previous limiting PHOENIX cases DUSTY and COND. A tentative comparison with observations demonstrates that the determination of effective temperatures based on simple cloud models has to be applied with care. Based on our new ...
1978-09-01
general equilibrium model of an economy with market fritions. A market is said to have frictions if buyers and sellers have trouble finding each other, if it is costly for them to search for each other, and if it is costly to wait to buy or sell. Equilibrium is a stationary probability distribution over the set of possible time paths of states of the economy. This equilibrium reflects rational expectations if all agents know the stationary distribution of the variables they observe and if they exploit this information. Prices are fixed and are not necessarily equilibrium
Vapor-Liquid Equilibrium of Methane with Water and Methanol. Measurements and Modeling
DEFF Research Database (Denmark)
Frost, Michael Grynnerup; Karakatsani, Eirini; von Solms, Nicolas;
2014-01-01
There is a need for high-quality experimental phase equilibrium data in the petroleum and chemical industries, for example, mixtures of oil and gas with gas hydrate inhibitors (methanol, glycols) and organic acids. This includes a wide range of different systems, which all deal with processes tha...
Mergler, Y.L.; Rumley-Van Gurp, R.; Brasser, P.; Koning, M.C. de; Goetheer, E.L.V.
2011-01-01
In this study a systematic approach was chosen to test and characterize amine systems for CO2 capture. Vapour-liquid-equilibrium measurements were performed on a homologue series of amines, with ethylene amine as base structure. Various functional groups were used that ranged in chemical and
Cacciatore, Kristen L.; Amado, Jose; Evans, Jason J.; Sevian, Hannah
2008-01-01
We present a novel first-year chemistry laboratory experiment that connects solubility, equilibrium, and chemical periodicity concepts. It employs a unique format that asks students to replicate experiments described in different sample lab reports, each lacking some essential information, rather than follow a scripted procedure. This structure is…
Using the Science Writing Heuristic to Improve Students' Understanding of General Equilibrium
Rudd, James A., II; Greenbowe, Thomas J.; Hand, Brian M.
2007-01-01
This study compared the performance of students using the Science Writing Heuristic (SWH) approach and students using a standard or traditional laboratory curriculum on lecture exams and a laboratory practical exam on a specific topic, chemical equilibrium. The SWH helps students do inquiry science laboratory work by structuring the laboratory…
Mergler, Y.L.; Rumley-Van Gurp, R.; Brasser, P.; Koning, M.C. de; Goetheer, E.L.V.
2011-01-01
In this study a systematic approach was chosen to test and characterize amine systems for CO2 capture. Vapour-liquid-equilibrium measurements were performed on a homologue series of amines, with ethylene amine as base structure. Various functional groups were used that ranged in chemical and physica
Cacciatore, Kristen L.; Amado, Jose; Evans, Jason J.; Sevian, Hannah
2008-01-01
We present a novel first-year chemistry laboratory experiment that connects solubility, equilibrium, and chemical periodicity concepts. It employs a unique format that asks students to replicate experiments described in different sample lab reports, each lacking some essential information, rather than follow a scripted procedure. This structure is…
Liquid-Vapor Equilibrium of Multicomponent Cryogenic Systems
Thompson, W. Reid; Calado, Jorge C. G.; Zollweg, John A.
1990-01-01
Liquid-vapor and solid-vapor equilibria at low to moderate pressures and low temperatures are important in many solar system environments, including the surface and clouds of Titan, the clouds of Uranus and Neptune, and the surfaces of Mars and Triton. The familiar cases of ideal behavior are limiting cases of a general thermodynamic representation for the vapor pressure of each component in a homogeneous multicomponent system. The fundamental connections of laboratory measurements to thermodynamic models are through the Gibbs-Duhem relation and the Gibbs-Helmholtz relation. Using laboratory measurements of the total pressure, temperature, and compositions of the liquid and vapor phases at equilibrium, the values of these parameters can be determined. The resulting model for vapor-liquid equilibrium can then conveniently and accurately be used to calculate pressures, compositions, condensation altitudes, and their dependencies on changing climatic conditions. A specific system being investigated is CH4-C2H6-N2, at conditions relevant to Titan's surface and atmosphere. Discussed are: the modeling of existing data on CH4-N2, with applications to the composition of Titan's condensate clouds; some new measurements on the CH4-C2H6 binary, using a high-precision static/volumetric system, and on the C2H6-N2 binary, using the volumetric system and a sensitive cryogenic flow calorimeter; and describe a new cryogenic phase-equilibrium vessel with which we are beginning a detailed, systematic study of the three constituent binaries and the ternary CH4-C2H6-N2 system at temperatures ranging from 80 to 105 K and pressures from 0.1 to 7 bar.
Self-organized crystallization mechanism of non-equilibrium 2:1 type phyllosilicate systems
Institute of Scientific and Technical Information of China (English)
无
2002-01-01
The crystallization mechanism of 2:1 type regular interstratified minerals is investigated in views of non-equilibrium thermodynamics. The structural chemistry of relative layers and their interstratified combinations is analyzed and six kinds of non-equilibrium chemical systems have been induced. The universal laws of chemical reactions which happened in the interface region of these non-equilibrium systems have been summarized. From these laws, two reaction systems crystallizing out Tosudite and Rectorite respectively have been recovered. The kinetic model of chemical reactions has been developed by means of the mass conservation law. The oscillatory solution showing regular interstratified features has also been obtained numerically. These results indicate that the difference in original chemical composition among systems can affect the chemical connotation of reactants, intermediate products and resultants, and the flow chart of chemical reaction, but cannot change their crystallization behavior of network-forming cations, bigger and smaller network-modifying cations during crystallization. Hence, their kinetic model reflecting the universal crystallization law of these cations is just the same. These systems will crystallize out regular interstratified minerals at suitable parameters, which always exist as domain with nanometer-sized in thickness and can be called the self-organized ordering structure.
Equilibrium water content measurements for acid gas mixtures
Energy Technology Data Exchange (ETDEWEB)
Marriott, R.A.; Fitzpatrick, E.; Bernard, F.; Wan, H.H.; Lesage, K.L.; Davis, P.M.; Clark, P.D. [Alberta Sulphur Research Ltd., Calgary, AB (Canada)
2009-07-01
An accurate understanding of acid gas and water equilibrium is needed in order to design safe acid gas injection facilities. This paper described a joint industry project conducted to measure the water content of acid gas mixtures under moderate pressures and temperatures. The study has accumulated over 160 data points. Techniques used to obtain the measurements have included visual dew point determination for liquid acid gas and hydrates; the equilibration of samples in stirred autoclaves; basic static equilibration cells; and an isolated floating piston with a micro-sampler used to inject gaseous and liquid acid gas phases. As a result of the project, a high pressure micro-sampling technique has been developed to pressure limits of 1000 bar. 33 refs., 2 tabs., 10 figs.
Distributions of Hardy-Weinberg equilibrium test statistics.
Rohlfs, R V; Weir, B S
2008-11-01
It is well established that test statistics and P-values derived from discrete data, such as genetic markers, are also discrete. In most genetic applications, the null distribution for a discrete test statistic is approximated with a continuous distribution, but this approximation may not be reasonable. In some cases using the continuous approximation for the expected null distribution may cause truly null test statistics to appear nonnull. We explore the implications of using continuous distributions to approximate the discrete distributions of Hardy-Weinberg equilibrium test statistics and P-values. We derive exact P-value distributions under the null and alternative hypotheses, enabling a more accurate analysis than is possible with continuous approximations. We apply these methods to biological data and find that using continuous distribution theory with exact tests may underestimate the extent of Hardy-Weinberg disequilibrium in a sample. The implications may be most important for the widespread use of whole-genome case-control association studies and Hardy-Weinberg equilibrium (HWE) testing for data quality control.
Thermodynamic equilibrium calculation on preparation of copper oxalate precursor powder
Institute of Scientific and Technical Information of China (English)
FAN You-qi; ZHANG Chuan-fu; ZHAN Jing; WU Jian-hui
2008-01-01
According to the principles of simultaneous equilibrium and mass balance, a series of thermodynamic equilibrium equations of Cu2+ -C2O2-4 -NH3-NH4+-H2O system at ambient temperature were deduced theoretically and the logarithm concentration versus pH value (lg[Cu2+]T-pH) diagrams at different solution compositions were drawn. The results show that when pH is below 5.0, copper ion reacts with C2O42- directly and the morphology of copper precursor powder is of pie-shape; when pH is above 5.0, copper ion coordinates with ammonia, and the precipitation proceeds slowly accompanying with the release of copper ions from the multi-coordinated Cu(NH3)n2+ (n =1, 2, …, 5) and the morphologies of copper precursor powder are respectively of rod aggregation shape (when 5.0＜pH＜8.0) and of rod-shape (when pH＞8.0). Some experiments were performed to confirm the relation between the total concentration of copper ion and pH value. It is shown that the thermodynamic mathematical model is correct and the calculated values are basically accurate.
Determination of reversible protein equilibrium association coefficients using light scattering
Larkin, Michael
2009-03-01
The characterization in solution of reversible protein associations as well as associations between proteins and small molecules is essential in many areas of science. Understanding cellular function or developing and formulating pharmaceuticals or other biologically active materials often requires quantitation of such associations. Most pharmaceuticals have functionality due solely to association with molecules within the body, and the discovery and accurate characterization of these associations is a key element for pharmaceutical development. Unfortunately, most methods used to measure associations of proteins require either immobilizing the protein on a surface (e.g. surface plasmon resonance), which potentially alters the protein characteristics, or require considerable time and effort and large quantities of sample (e.g. analytical ultracentrifugation, isothermal titration calorimetry). Light scattering based measurements of reversible association coefficients require much less sample and may be performed much more rapidly than other free solution techniques. In this talk I describe how static and dynamic light scattering may each independently be used to measure equilibrium association coefficients between proteins in free solution, and may also be used to observe and quantitate the association of small molecules with them. I present background theory for both static and dynamic light scattering measurements of equilibrium associations, and examples of measurements made of both model systems and of systems with commercial relevance in the pharmaceutical industry.