Achievements, current status and prospects for Russian-American cooperation in nuclear material physical protection, control and accounting - 1998

International Nuclear Information System (INIS)

Nikiforov, N.V.

1999-01-01

The process of upgrading the material physical protection, control and accounting systems is an ongoing and long-term process that consists of modernization measuring equipment and methodologies, improving, data exchange and processing technologies, and improving administrative procedures. The positive results that was already achieved form a foundation upon which this collaboration may extend into other new and important areas, such as - the second and third lines of defence, which are directed toward countering illegal trafficking not only in nuclear materials, but in other hazardous substances that constitute a threat to the nuclear sites and national security of the countries [ru

Collaborative Russian-US work in nuclear material protection, control and accounting at the Institute of Physics and Power Engineering

International Nuclear Information System (INIS)

Matveenko, I.P.; Pshakin, G.M.; Mozhaev, V.K.

1995-01-01

The Institute of Physics and Power Engineering (IPPE) is a leading research center under the Ministry of Atomic Energy of the Russian Federation. IPPE encompasses many installations and many specialists who perform fundamental and applied investigations in nuclear power and technology for the national nuclear program. IPPE has a key role in the national nuclear material protection, control, and accounting (MPC ampersand A) system both as a nuclear facility and also as a training center for MPC ampersand A. As a participant in the US-Russian Laboratory-to-Laboratory Cooperative Program in MPC ampersand A, IPPE is conducting several tasks in collaboration with US Department of Energy national laboratories. The main goal of these tasks is the rapid improvement of MPC ampersand A at one of the most sensitive operating IPPE installations, the BFS critical facility, which has large numbers of fuel items containing highly enriched uranium and weapons-grade plutonium. After the completion of several test, evaluation, and demonstration tasks, it is hoped that the tested and adopted methods and procedures can be applied not only to the entire population of BFS fuel items, but also to other facilities at IPPE and other Russian nuclear institutes and operating facilities. The collaborative tasks cover seven areas: computerized nuclear material accounting, entry control and portals, item control and inventory, design evaluation and analysis, gamma and neutron assay, an integrated demonstration, and physical protection elements and test bed

Cooperative efforts to improve nuclear materials accounting, control and physical protection at the National Science Center, Kharkov Institute of Physics and Technology

International Nuclear Information System (INIS)

Zelensky, V.F.; Mikhailov, V.A.

1996-01-01

The US Department of Energy (DOE) and the Ukrainian Government are engaged in a program of cooperation to enhance the nonproliferation of nuclear weapons by developing a strong national system of nuclear material protection, control, and accounting (MPC and A). This paper describes the capabilities and work of the Kharkov Institute of Physics and Technology (KIPT) and cooperative efforts to improve MPC and A at this facility. It describes how these cooperative efforts grew out of Ukraine''s decision to become a non-nuclear weapon state and the shortcomings in MPC and A that developed at KIPT after the disintegration of the former Soviet Union. It also envisions expanded future cooperation in other areas of nuclear materials management

Experience of developing and introduction of the integrated systems for accounting, control and physical protection of nuclear materials under conditions of continuously operating production

International Nuclear Information System (INIS)

Filatov, O.N.; Rogachev, V.E.

2003-01-01

The improvements of the integrated systems for accounting, control and physical protection (ACPP) of nuclear materials under conditions practically continuous production cycle are described. As a result of development and introduction of the improved means and technologies the developed systems realized successfully the requirements of reliable ACPP of nuclear materials [ru

Physical protection educational program - information security aspects

International Nuclear Information System (INIS)

Tolstoy, A.

2002-01-01

Full text: Conceptual approaches for designing an expert training program on object physical protection taking into account information security aspects are examined. A special educational course does not only address the immediate needs for an educational support but also ensures that new professionals include new concepts and knowledge in their practice and encourages current practitioners towards such practice. Features of the modern physical protection systems (PPS) and classification of information circulating at them are pointed out. The requirements to the PPS information protection subsystem are discussed. During the PPS expert training on information security (IS) aspects they should receive certain knowledge, on the basis of which they could competently define and carry out the PPS IS policy for a certain object. Thus, it is important to consider minimally necessary volume of knowledge taught to the PPS experts for independent and competent implementation of the above listed tasks. For the graduate PPS IS expert training it is also necessary to examine the normative and legal acts devoted to IS as a whole and the PPS IS in particular. It is caused by necessity of conformity of methods and information protection tools implemented on a certain object to the federal and departmental IS requirements. The departmental normative IS requirements define an orientation of the PPS expert training. By curriculum development it is necessary to precisely determine for whom the PPS experts are taught. The curriculum should reflect common features of the PPS functioning of the certain object type, i.e. it should be adapted to a certain customer of the experts. The specified features were taken into account by development of an educational course 'Information security of the nuclear facility physical protection systems', taught at the Moscow Engineering Physics Institute (State University) according to the Russian-American educational program 'Master in Physical

Physical protection nuclear facilities against sabotage

International Nuclear Information System (INIS)

Hagemann, A.

2001-01-01

defined by 'Security Categories'. This method of categorization took into account the attractiveness of the nuclear material for unauthorized removal and the potential radiological consequences of an act of sabotage against the material directly or against the facility where the material is used or processed. Category I nuclear material and nuclear power plants were assigned to the 'Security Category' which required the highest level of physical protection. This level was defined by required measures in a 'Security Measure Catalogue'. These requirements were based on a certain model of potential adversaries, the DBT. Having the DBT translated into a number of requirements it was a so called compliance based approach. This system was changed because this approach lacked of flexibility and did not fit with categorization table in the CPPNM. The catalogue system was replaced by guidelines considering the actual main nuclear activities in Germany which are the operation of light water NPPs and transport of fresh and spent fuel. In the guideline for the physical protection of NPPs with light water reactors based on a safety analysis a specific objective is defined which requires the protection of certain functions concerning cooling, power supply and integrity. The way how to protect these functions and on which level is a result of the application of the DBT. An attempt of sabotage might be successful by a destruction of certain vital equipment only. In this hypothetical case only the consequences of a sabotage can be mitigated. That is one of the important differences to the protection against unauthorized removal of material. In order to give the response forces a realistic chance to terminate an attempt of sabotage in time which might be performed by outsiders the measures of prevention and delay - that means on site measures - become of more importance. Concerning the protection against malevolent acts by an individual from inside a facility the number of interfaces to

Physical protection cooperation with Former Soviet Union countries

International Nuclear Information System (INIS)

Williams, J.D.

1995-01-01

This paper presents an overview of physical protection cooperation activities between Sandia (SNL) and the Former Soviet Union (FSU) regarding Material Protection Control and Accounting (MPC ampersand A) responsibilities. Begun four years ago as part of the Safe, Secure Dismantlement Program, this project is intended to stem proliferation of weapons of mass destruction. Purpose of the program is to accelerate progress toward a goal shared by both Russia and the United States: to reduce the risk of nuclear weapons proliferation, including such threats as theft, diversion, and unauthorized possession of nuclear materials. This will be accomplished by strengthening the MPC ampersand A systems in both, countries. This new program (US Department of Energy Laboratory-to-Laboratory MPC ampersand A program) is designed to complement Government-to-Government programs sponsored by US Senators Nunn and Lugar. US and Russian representatives exchange visits and discuss physical protection philosophies. Russian representatives have received formal training in the US process of system design and analysis to include the design of an effective physical protection system, determination of physical protection system objectives, initial design of a physical protection system, evaluation of the design, and often redesign or refinement of the existing system. Some Russian organizations have philosophies similar to those of the United States, but when they differ, the US and Russian representatives must negotiate. Other Russian organizations, because of heavy reliance on guard forces, have not developed a systematic design process. Cooperative work between US national laboratories and Russian counterparts has resulted in major physical protection enhancements at a Russian demonstration site and other advancements for Laboratory-to-Laboratory projects

Status of physical protection systems of nuclear facilities; survey report

International Nuclear Information System (INIS)

Hwang, In Koo; Kwack, Eun Ho; Ahn, Jin Soo; Lee, Hyun Chul; Kim, Jung Soo

2002-02-01

This report presents a survey on the physical protection equipment for a nuclear power plant. This survey was conducted by Korea Atomic Energy Research Institute as a part of the project, 'Development of Technologies for National Control of and Accountancy for Nuclear Material,' funded by the Ministry of Science and Technology of Korea. A physical protection system of a nuclear plant includes outer and inner fences, intrusion detection sensors, alarm generation system, illumination equipment, central monitoring and control station, entry control and management system, etc. The outermost fence indicates the boundary of the plant area and prevents a simple or unintentional intrusion. The inner fence area of each plant unit associated with intrusion detection sensors, illuminators, monitoring cameras, serves the key role for physical protection function for the nuclear plant

Physical protection as the most important part of the national system of combating illicit trafficking

International Nuclear Information System (INIS)

Ivanov, P.; Kokhan, V.D.

2001-01-01

It is obvious today that illicit trafficking, including its most dangerous manifestations proliferation of nuclear weapons, smuggling of nuclear materials and equipment, presents a serious threat to the international community. To defeat this evil is possible only by joint efforts, by undertaken protective measures on national and international levels. Joint efforts should be directed at fulfilling three main tasks as follows: 1. Safe and reliable handling of nuclear material, effective measures of its physical protection, accountancy and control in order to prevent proliferation; 2. Joint activities of intelligence customs and law-enforcement authorities directed at prevention of international trafficking and marketing of stolen goods; 3. Joint activities directed at identification and prevention of illegal supply and demand of fissionable materials counteracting thereby various criminal structures. We believe that in order to solve these problems an international regime should be established. Such an international regime will make the states implement the existing international agreements that will strengthen their postings regarding non-proliferation of nuclear weapons, ensure combating of illicit trafficking as well as facilitating cooperation between national and international databases on non-proliferation of nuclear weapons, bilateral agreements between state authorities and international organizations regarding joint investigation procedures of the cases involving illicit trafficking. We believe that these goals of an international regime against illicit trafficking can be achieved by only one organization - the IAEA, an authority respected by the international community and presently responsible for nuclear safeguards. Recommendations and guidelines on physical protection, including the Convection on Physical Protection, have been developed under its auspices. The IAEA enjoys great respect and has extensive contacts including those with Interpol; it

National Radiological Protection Board accounts 1986-87

International Nuclear Information System (INIS)

1987-05-01

The 1986-87 accounts of the Radiological Protection Board are presented in accordance with the Radiological Protection Act 1970. The report of the Comptroller and Auditor General is also given. (U.K.)

National Radiological Protection Board accounts 1986-87

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

The 1986-87 accounts of the Radiological Protection Board are presented in accordance with the Radiological Protection Act 1970. The report of the Comptroller and Auditor General is also given. (U.K.).

US/Russian program in materials protection, control and accounting at the RRC Kurchatov Institute: 1997--1998

International Nuclear Information System (INIS)

Sukhoruchkin, V.; Rumyantsev, A.; Shmelev, V.

1998-01-01

Six US Department of Energy Laboratories are carrying out a program of cooperation with the Russian Research Center Kurchatov Institute to improve nuclear material protection, control and accounting (MPC and A) at Kurchatov. In 1997--1998 the primary thrust of this program has been directed to Building 106, which houses a number of test reactors and critical facilities. Substantial improvements in physical protection, upgrades in the physical inventory taking procedures, installation of equipment for the computerized materials accounting system, and installation of nuclear material portal monitors and neutron-based measurement equipment are being carried out at this facility. Software for the computerized accounting system, named KI-MACS, has been developed at Kurchatov and the system has been fully integrated with the bar code printing and reading equipment, electronic scales, and nondestructive assay equipment provided under this program. Additional 1997--1998 activities at Kurchatov include continuation of a tamper indicating device program, vulnerability assessments of several facilities, hosting of a Russian-American Workshop on Fissile Material Control and Accountability at Critical Facilities, and the development of accounting procedures for transfers of nuclear materials between material balance areas

US/Russian laboratory-to-laboratory program in materials protection, control and accounting at the RRC Kurchatov Institute

International Nuclear Information System (INIS)

Sukhoruchkin, V.; Roumiansev, A.; Shmelev, V.

1996-01-01

Six US DOE Laboratories are carrying out a program of cooperation with the Russian Research Center Kurchatov Institute (RRC KI) to improve the capabilities and facilities in nuclear material protection, control, and accounting (MPC ampersand A). In 1995, the primary emphasis of this program was the implementation of improved physical protection at a demonstration building at RRC KI, and the upgrading of the computerized MC ampersand A system, diagnostic instrumentation, and physical inventory procedures at a critical assembly within this building. Work continues in 1996 at the demonstration building but now also has begun at the two Kurchatov buildings which constitute the Central Storage Facility (CSF). At this facility, there will be upgrades in the physical inventory taking procedures, a test and evaluation of gamma-ray isotopic measurements, evaluations of nuclear material portal monitors and neutron-based measurement equipment as well as development of an improved computerized materials accounting system, implementation of bar code printing and reading equipment, development of tamper indicating device program, and substantial improvements in physical protection. Also, vulnerability assessments begun in 1995 are being extended to additional high priority facilities at Kurchatov

Physics for radiation protection

CERN Document Server

Martin, James E

2013-01-01

A much-needed working resource for health physicists and other radiation protection professionals, this volume presents clear, thorough, up-to-date explanations of the basic physics necessary to address real-world problems in radiation protection. Designed for readers with limited as well as basic science backgrounds, Physics for Radiation Protection emphasizes applied concepts and carefully illustrates all topics through examples as well as practice problems. Physics for Radiation Protection draws substantially on current resource data available for health physics use, providing decay schemes and emission energies for approximately 100 of the most common radionuclides encountered by practitioners. Excerpts of the Chart of the Nuclides, activation cross sections, fission yields, fission-product chains, photon attenuation coefficients, and nuclear masses are also provided.

Material protection control and accounting program activities at the Urals electrochemical integrated plant

International Nuclear Information System (INIS)

McAllister, S.

1997-01-01

The Urals Electrochemical Integrated Plant (UEIP) is the Russian Federation's largest uranium enrichment plant and one of three sites in Russia blending high enriched uranium (HEU) into commercial grade low enriched uranium. UEIP is located approximately 70 km north of Yekaterinburg in the closed city of Novouralsk (formerly Sverdlovsk- 44). DOE's MPC ampersand A program first met with UEIP in June of 1996, however because of some contractual issues the work did not start until September of 1997. The six national laboratories participating in DOE's Material Protection Control and Accounting program are cooperating with UEIP to enhance the capabilities of the physical protection, access control, and nuclear material control and accounting systems. The MPC ampersand A work at UEIP is expected to be completed during fiscal year 2001

Physical protection of facilities and special nuclear materials in france

International Nuclear Information System (INIS)

Jeanpierre, G.

1980-01-01

Physical protection of nuclear facilities and special nuclear materials is subject in France to a national governmental regulation which provides for the basic principles to be taken into account and the minimal level of protection deemed necessary. But the responsibility of implementation is left to the facility management and the resulting decentralization allows for maximum efficiency. All safeguards measures comply with the commitments taken at the international level by the French government

English/Russian and Russian/English glossary of physical protection terms

International Nuclear Information System (INIS)

Soo Hoo, M.S.

1995-07-01

This glossary was prepared in fulfillment of the Glossary Preparation Task identified in the Program Plan for providing Assistance to the Russian Federation in Nuclear Material Control and Accounting and Physical Protection. The Program Plan is part of the Cooperative Threat Reduction Program as provided for under House Resolution (H.R.) 3807 (Title II, as referenced under Public Law (P.L.) 102-229. The terms in this glossary were derived from physical protection training material prepared at Sandia. The training material, and thus refinements to the glossary, has undergone years of development in presentation to both domestic and international audiences. Also, Russian Colleagues and interpreters have reviewed the translations for accuracy

English/Russian and Russian/English glossary of physical protection terms

Energy Technology Data Exchange (ETDEWEB)

Soo Hoo, M.S. [ed.

1995-07-01

This glossary was prepared in fulfillment of the Glossary Preparation Task identified in the Program Plan for providing Assistance to the Russian Federation in Nuclear Material Control and Accounting and Physical Protection. The Program Plan is part of the Cooperative Threat Reduction Program as provided for under House Resolution (H.R.) 3807 (Title II, as referenced under Public Law (P.L.) 102-229. The terms in this glossary were derived from physical protection training material prepared at Sandia. The training material, and thus refinements to the glossary, has undergone years of development in presentation to both domestic and international audiences. Also, Russian Colleagues and interpreters have reviewed the translations for accuracy.

45 CFR 164.528 - Accounting of disclosures of protected health information.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Accounting of disclosures of protected health... Health Information § 164.528 Accounting of disclosures of protected health information. (a) Standard: Right to an accounting of disclosures of protected health information. (1) An individual has a right to...

US/Belarusian government-to-government material protection, control, and accounting cooperation at the Sosny Science and Technology Center

International Nuclear Information System (INIS)

Case, R.S. Jr.; Baumann, M.; Madsen, R.W.; Krevsum, E.; Haase, M.

1996-01-01

A formal program of cooperation between the US Department of Energy and the Belarusian regulatory agency Promatomnazdor (PAN) began in 1994. A visit to the Belarusian Sosny Science and Technology Center (SSTC) by representatives from the US, Sweden, Japan, and the International Atomic Energy Agency resulted in a multinational program of cooperation to enhance the existing material protection, control, and accounting systems in place at Sosny. Specific physical-protection-related recommendations included upgrades to the physical protection systems at Buildings 33 and 40 at Sosny and the security systems in the SSTC central alarm station. US experts in conjunction with the multinational team and Belarus representatives, have reviewed initial designs for physical protection upgrades at Sosny. Subsequently, the US assumed an essential role for funding and technical oversight for enhancements at the SSTC, aspects of its emergency communication systems, and the upgrade of the SSTC site access control system. This paper addresses the status of physical protection enhancements at the Sosny site

Physical protection system design and evaluation

International Nuclear Information System (INIS)

Williams, J.D.

1997-01-01

The design of an effective physical protection system includes the determination of physical protection system objectives, initial design of a physical protection system, design evaluation, and probably a redesign or refinement. To develop the objectives, the designer must begin by gathering information about facility operation and conditions, such as a comprehensive description of the facility, operating conditions, and the physical protection requirements. The designer then needs to define the threat. This involves considering factors about potential adversaries: class of adversary, adversary's capabilities, and range of adversary's tactics. Next, the designer should identify targets. Determination of whether or not the materials being protected are attractive targets is based mainly on the ease or difficulty of acquisition and desirability of the material. The designer now knows the objectives of the physical protection system, that is, open-quotes what to protect against whom.close quotes The next step is to design the system by determining how best to combine such elements as fences, vaults, sensors and assessment devices, entry control elements, procedures, communication devices, and protective forces personnel to meet the objectives of the system. Once a physical protection system is designed, it must be analyzed and evaluated to ensure it meets the physical protection objectives. Evaluation must allow for features working together to ensure protection rather than regarding each feature separately. Due to the complexity of the protection systems, an evaluation usually requires modeling techniques. If any vulnerabilities are found, the initial system must be redesigned to correct the vulnerabilities and a reevaluation conducted. This paper reviews the physical protection system design and methodology mentioned above. Examples of the steps required and a brief introduction to some of the technologies used in modem physical protections system are given

Physical protection of nuclear materials and facilities in CEA

International Nuclear Information System (INIS)

Garnier-Gratia, M.-H.; Jorda, A.

2001-01-01

Full text: CEA (Commissariat a l'Energie Atomique), as nuclear operator, is responsible for the control and protection of their nuclear materials. Inside CEA, DCS (Central Security Division) is in charge of the security matters, DCS defines the CEA strategy in this field, especially in physical protection. The paper will present the physical protection strategy of CEA. DCS defines the rules and methods; the operators have to apply in order to fulfill the security objectives of CEA. CEA has to provide the regulatory authority with documents proving that it is in accordance with the requirements of the 25th July 1980 law and 12th May 1981 decree. It has to implement all the necessary means in order to achieve the results requested by the regulatory authority. All these arrangements are described in the 'license and control file'. This file should specify the facility safeguards and physical protection system. Accounting measures are also described. In this file, the petitioner has to justify its capacity for holding nuclear materials and for exercising authorized activities on them. So the organization and the installed means have to be described in this authorization file. For physical protection, containment, surveillance and physical protection measures are presented: Containment measures must prevent the unauthorized or unjustified movements of nuclear material in the framework of the authorized activities; Surveillance measures must guarantee the integrity of the containment, check that no material is exiting by an abnormal channel; Physical protection measures for the materials, the premises and the facilities are intended to protect them against malevolent actions by means of security systems. The Central Security Division has established guidelines to provide guidance to the nuclear materials holders in writing such files. Each holding unit has to establish a 'license and control file' and each CEA site establishes a 'site license and control file

Account 1983-1984. [National Radiological Protection Board

Energy Technology Data Exchange (ETDEWEB)

1984-01-01

Account prepared pursuant to section 3 (4) of the Radiological Protection Act 1970 of the receipts and payments of the National Radiological Protection Board for the year ended 31st March 1984; together with the Report of the Comptroller and Auditor General thereon. (In continuation of House of Commons Paper No. 149 of 1983-84).

Physical protection design and analysis training for the former Soviet Union

International Nuclear Information System (INIS)

Soo Hoo, M.S.; Chapek, J.F.; Ebel, P.E.

1996-01-01

Since 1978, Sandia National Laboratories has provided training courses in the systematic design of Physical Protection Systems (PPS). One such course, the International Training Course (TC) on the Physical Protection of Nuclear Facilities and Materials, is sponsored by the Department of Energy's International Safeguards Division , the International Atomic Energy Agency, and the Department of State. Since 1978, twelve 3- and 4-week classes have been conducted by Sandia for these sponsors. One- and two-week adaptations of this course have been developed for other customers, and, since 1994, nine of these abbreviated courses have been presented in the Russian language to participants from the Former Soviet Union (SU). These courses have been performed in support of the Department of Energy's program on Material Protection, Control and Accounting (MPC ampersand A) for the Russian Federation and the Newly Independent States. MPC ampersand A physical protection training assumes participants have more narrowly defined backgrounds. In using affective approaches, the overall goal of training in the context of the MPC ampersand A Program is to develop modern and effective, indigenous capabilities for physical protection system design and analysis within the SU. This paper contrasts the cognitive and affective approaches to training and indicates why different approaches are required for the ITC and the MPC ampersand A Programs

Generic physical protection logic trees

International Nuclear Information System (INIS)

Paulus, W.K.

1981-10-01

Generic physical protection logic trees, designed for application to nuclear facilities and materials, are presented together with a method of qualitative evaluation of the trees for design and analysis of physical protection systems. One or more defense zones are defined where adversaries interact with the physical protection system. Logic trees that are needed to describe the possible scenarios within a defense zone are selected. Elements of a postulated or existing physical protection system are tagged to the primary events of the logic tree. The likelihood of adversary success in overcoming these elements is evaluated on a binary, yes/no basis. The effect of these evaluations is propagated through the logic of each tree to determine whether the adversary is likely to accomplish the end event of the tree. The physical protection system must be highly likely to overcome the adversary before he accomplishes his objective. The evaluation must be conducted for all significant states of the site. Deficiencies uncovered become inputs to redesign and further analysis, closing the loop on the design/analysis cycle

Generic physical protection logic trees

Energy Technology Data Exchange (ETDEWEB)

Paulus, W.K.

1981-10-01

Generic physical protection logic trees, designed for application to nuclear facilities and materials, are presented together with a method of qualitative evaluation of the trees for design and analysis of physical protection systems. One or more defense zones are defined where adversaries interact with the physical protection system. Logic trees that are needed to describe the possible scenarios within a defense zone are selected. Elements of a postulated or existing physical protection system are tagged to the primary events of the logic tree. The likelihood of adversary success in overcoming these elements is evaluated on a binary, yes/no basis. The effect of these evaluations is propagated through the logic of each tree to determine whether the adversary is likely to accomplish the end event of the tree. The physical protection system must be highly likely to overcome the adversary before he accomplishes his objective. The evaluation must be conducted for all significant states of the site. Deficiencies uncovered become inputs to redesign and further analysis, closing the loop on the design/analysis cycle.

32 CFR 644.140 - Physical protection.

Science.gov (United States)

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Physical protection. 644.140 Section 644.140... ESTATE HANDBOOK Acquisition Acquisition by Leasing § 644.140 Physical protection. It is essential that the Division or District Engineer make provision for the physical protection for all facilities under...

International Physical Protection Advisory Service

International Nuclear Information System (INIS)

Soo Hoo, M.S.; Ek, D.; Hageman, A.; Jenkin, T.; Price, C.; Weiss, B.

1998-01-01

Since its inception in 1996, the purpose of the International Physical Protection Advisory Service (IPPAS) has been to provide advice and assistance to International Atomic Energy Agency (IAEA) Member States on strengthening and enhancing the effectiveness of their state system of physical protection of nuclear materials and facilities. Since the protection of nuclear materials and facilities is a Member State's responsibility, participation within the IPPAS program is voluntary. At the request of a Member State, the IAEA forms a multinational IPPAS team consisting of physical protection specialists. These specialists have broad experience in physical protection system design, implementation, and regulatory oversight. The exact make-up of the team depends upon the needs of the requesting state. IPPAS missions to participating states strive to compare the domestic procedures and practices of the state against international physical protection guidelines (IAEA Information Circular 225) and internationally accepted practice. The missions utilize a top to bottom approach and begin by reviewing the legal and regulatory structure and conclude with reviews of the implementation of the state regulations and international guidelines at individual facilities. IPPAS findings are treated as IAEA Safeguards Confidential Information. To date, IPPAS missions have been concluded in Slovenia, Bulgaria, Romania, Hungary, and Poland

Physical protection of nuclear material

International Nuclear Information System (INIS)

1975-01-01

Full text: An Advisory Group met to consider the up-dating and extension of the Recommendations for the Physical Protection of Nuclear Material, produced in 1972. Twenty-seven experts from 11 countries and EURATOM were present. Growing concern has been expressed in many countries that nuclear material may one day be used for acts of sabotage or terrorism. Serious attention is therefore being given to the need for States to develop national systems for the physical protection of nuclear materials during use, storage and transport throughout the nuclear fuel cycle which should minimize risks of sabotage or theft. The revised Recommendations formulated by the Advisory Group include new definitions of the objectives of national systems of physical protection and proposals for minimizing possibilities of unauthorized removal and sabotage to nuclear facilities. The Recommendations also describe administrative or organizational steps to be taken for this purpose and the essential technical requirements of physical protection for various types and locations of nuclear material, e.g., the setting up of protected areas, the use of physical barriers and alarms, the need for security survey, and the need of advance arrangements between the States concerned in case of international transportation, among others. (author)

Regulatory control of physical protection systems

International Nuclear Information System (INIS)

Rajdeep; Mayya, Y.S.

2017-01-01

The safety of facilities in BARC is under the regulatory oversight of BSC. The security architecture for these facilities incorporates multiple layers of Physical Protection Systems. The demands of safety may sometimes conflict with the needs of security. Realizing the need to identify these interfaces and extend the regulatory coverage to Physical Protection Systems, a Standing Committee named Physical Protection System Review Committee (PPSRC) has been constituted as a 2"n"d tier entity of BSC. PPSRC includes experts from various domains concerned with nuclear security, viz. physical protection systems, cyber security, radiation safety, security operations, technical services and security administration

The physical protection of nuclear material and nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-06-01

The latest review (1993) of this document was of limited scope and resulted in changes to the text of INFCIRC/225/Rev.2 designed to make the categorization table in that document consistent with the categorization table contained in the Convention on Physical Protection of Nuclear Materials. Consequently, a comprehensive review of INFCIRC/225 has not been conducted since 1989. Consequently, a meeting of national experts was convened from 2-5 June 1998 and from 27-29 October 1998 for a thorough review of INFCIRC/225/Rev.3. The revised document reflects the recommendations of the national experts to improve the structure and clarity of the document and to take account of improved technology and current international and national practices. In particular, a chapter has been added which provides specific recommendations related to sabotage of nuclear facilities and nuclear material. As a result of this addition, the title has been changed to 'The Physical Protection of Nuclear Material and Nuclear Facilities'. The recommendations presented in this IAEA document reflect a broad consensus among Member States on the requirements which should be met by systems for the physical protection of nuclear materials and facilities. It is hoped that they will provide helpful guidance for Member States.

The physical protection of nuclear material and nuclear facilities

International Nuclear Information System (INIS)

1999-06-01

The latest review (1993) of this document was of limited scope and resulted in changes to the text of INFCIRC/225/Rev.2 designed to make the categorization table in that document consistent with the categorization table contained in the Convention on Physical Protection of Nuclear Materials. Consequently, a comprehensive review of INFCIRC/225 has not been conducted since 1989. Consequently, a meeting of national experts was convened from 2-5 June 1998 and from 27-29 October 1998 for a thorough review of INFCIRC/225/Rev.3. The revised document reflects the recommendations of the national experts to improve the structure and clarity of the document and to take account of improved technology and current international and national practices. In particular, a chapter has been added which provides specific recommendations related to sabotage of nuclear facilities and nuclear material. As a result of this addition, the title has been changed to 'The Physical Protection of Nuclear Material and Nuclear Facilities'. The recommendations presented in this IAEA document reflect a broad consensus among Member States on the requirements which should be met by systems for the physical protection of nuclear materials and facilities. It is hoped that they will provide helpful guidance for Member States

UNHCR and the pursuit of international protection: accountability through technology?

DEFF Research Database (Denmark)

Jacobsen, Katja Lindskov; Sandvik, Kristin B.

2018-01-01

Better management and new technological solutions are increasingly portrayed as the way to improve refugee protection and enhance the accountability of humanitarian actors. Taking concepts of legibility, quantification and co-production as the point of departure, this article explores how techno-bureaucratic...... practices shape conceptions of international refugee protection. We do this by examining the evolving roles of results-based management (RBM), biometrics and cash-based interventions as ‘accountability technologies’ in the United Nations High Commissioner for Refugees’ international protection efforts...

Temporary physical protection systems

International Nuclear Information System (INIS)

Williams, J.D.; Gangel, D.J.; Madsen, R.W.

1991-01-01

Terrorism and other aspects of world political instability have created a high demand for temporary physical protection systems within the nuclear materials management community. They can be used when vehicles carrying important assets are away from their permanent fixed site location, around areas where experiments are being temporarily conducted, around construction areas and one portions of a fixed site physical security system which is temporarily inoperable. Physical security systems can be grouped into four categories: tactical, portable, semi-permanent, and fixed. The resources and experience gained at Sandia National Laboratories in over forty years of developing and implementing security systems for protecting nuclear weapons and fixed nuclear facilities is now being applied to temporary physical security systems. This paper emphasizes temporary physical security systems and their component parts that are presently available and identify additional system-subsystem objectives, requirements, and concepts

Physical protection of nuclear installations

International Nuclear Information System (INIS)

Toepfer, K.

1989-01-01

This contribution investigates the possible danger and the legal basis of physical protection and explains the current, integrated system provided for, as well as the underlying possible scenarios of an assault: (1) by a violent crowd of aggressors outside the installation, (2) by a small group of aggressors outside the installation, (3) by a person allowed to enter (internal assault). The physical protection system supplements the internal safety measures to enhance protection against hypothetical and possible acts of terrorism or other criminal assault. The system covers external and internal controlled areas, access monitoring, physical protection control room and service, security checks of the personnel, and activities to disclose sabotage. Some reflections on the problem field between security controls and the constitutional state conclude this contribution. (orig./HSCH) [de

Dealing with the regional challenge of physical protection of nuclear materials

International Nuclear Information System (INIS)

Paschoa, A.S.

2002-01-01

Full text: The problem of protecting sensitive fissile and fissionable nuclear materials of misuses by governments has been the subject of the convention on physical protection of nuclear material (CPPNM), which entered into force on February 8, 1987. However, in May 2001 the final report of the expert meeting had already recognized 'a clear need to strengthen the international physical protection regime'. The board of governors of the International Atomic Energy Agency (IAEA) decided then to convene a group, which would meet in Vienna from 3 to 7 December 2001, to draft on amendment to the CPPNM. The tragic occurrences of September 11, 2001, however, changed the then generally accepted view on the problem of physical protection, because nuclear materials had to be protected from falling into the hands of terrorists rather than of governments thirst of nuclear sensitive materials. Moreover, crude explosive devices could be made by terrorists, or hired scientists, using readily available radioactive materials, like 226 Ra or 137 Cs to inflict damage to civilians. Thus physical protection of those and other radioactive materials became an instant challenge for national and international authorities to prevent the use of such materials in terrorist actions. The prevention of illicit trafficking of radioactive materials is now in the priority list of these authorities. Fortunately; an international conference on 'Measures to Detect, Intercept and Respond to the Illicit Uses of Nuclear Materials and Radioactive Sources' was held in Stockholm, Sweden, in May 2001. An IAEA document - GOV/2001/37-GC(45)/20 - recommended in its plan of activities a series of projects to be implemented between 2002 and 2005, which included developing and providing assistance for the application of: (i) standards for physical protection of nuclear materials and nuclear facilities in member states; (ii) norms and guidelines for nuclear material accounting and control in member states; (iii

Physical Protection of Nuclear Safeguards Technology

International Nuclear Information System (INIS)

Hoskins, Richard

2004-01-01

IAEA's Nuclear Security Plan is established to assist Member States in implementing effective measures against nuclear terrorism. Four potential threats were identified: theft of nuclear weapon, nuclear explosive device, radiological dispersal device and an attack on radiation facility. In order to achieve effective protection of nuclear materials and facilities, the IAEA sponsored the Convention of the Physical Protection of Nuclear Materials which focuses on the protection of nuclear materials 'in international transport. The IAEA also promoted INFCIRC/255 entitled the Physical Protection of Nuclear Materials and Nuclear Facilities and published TECDOC/967 for the protection of nuclear materials and facilities against theft and sabotage and during transport. Assistance is available for the Member States through the International Physical Protection Advisory Service (IPPAS) and the International Nuclear Security Advisory Service (INSServ). (author)

The physics of radiation protection

International Nuclear Information System (INIS)

Doerschel, B.; Schuricht, V.; Steuer, J.

1996-01-01

The book is aimed at both practising specialists and scientists wishing to learn about the fundamental science of radiation protection. The first part of the book, 'Physical Fundamentals of Radiation Protection', presents a concise description of radiation sources and radiation fields, interaction of radiation with matter, radiation effects and radiation damage, basic concept of radiation protection, radiation exposure of man, radiation protection measuring techniques and physical fundamentals for limiting radiation exposure. The second part, 'Calculational Exercises for Radiation Protection' is intended to supplement the first part by carrying out relevant calculations, amending and adding special aspects and to give guidance in solving practical problems. The book is written for scientists as well as for students and staff working in nuclear facilities, hospitals and institutions responsible for radiation and environmental protection. (UK)

The physical protection of nuclear material

International Nuclear Information System (INIS)

1989-12-01

A Technical Committee on Physical Protection of Nuclear Material met in April-May 1989 to advise on the need to update the recommendations contained in document INFCIRC/225/Rev.1 and on any changes considered to be necessary. The Technical Committee indicated a number of such changes, reflecting mainly: the international consensus established in respect of the Convention on the Physical Protection of Nuclear Material; the experience gained since 1977; and a wish to give equal treatment to protection against the theft of nuclear material and protection against the sabotage of nuclear facilities. The recommendations presented in this IAEA document reflect a broad consensus among Member States on the requirements which should be met by systems for the physical protection of nuclear materials and facilities. 1 tab

Peculiarities of physical protection assurance of the nuclear materials at nuclear installation decommissioning stage

International Nuclear Information System (INIS)

Pinchuk, M.G.

2001-01-01

objective is timely prevention, detection of and response to the attempts to use accounted nuclear material for illicit trafficking. In addition to traditional measures, a centralized automated system to detect unauthorized intrusion, to register and suppress the penetration attempts and to organize controlled access to nuclear installation Chernobyl NPP and its internal areas is being established. This system covers three levels of hierarchical physical protection system of all facilities of Chernobyl NPP. The distinguishing features of this system are: high level of stability and reliability, automatic self-diagnostic functions, detection of performance intrusion and restoration of the normal operability. This system has a number of local physical protection subsystems which are the key data base users and are capable to operate off-line in case of the short-time loss of connection with the top level. The access means will include full-height turnstiles and tripods. In the areas of particular importance video identification is envisaged. Passive remote inductive cards encoded on-site will be used as passes. In addition, the issue of control, accountancy and physical protection to be exercised throughout the whole process of fuel discharge, cooling and transportation to KHOYAT -2 (interim storage facility), which will house nuclear material of the total activity more than 1.2 million Ci and about 4.00 tonnes Pu-239, is under review. It is envisaged to create complex to support nuclear material management processes. A provisional engineering solution provides for visual control and video recording, automated record of processes, casks' integrity control, communication means, blocking of the further operations when the precedent operations are inconsistent with QA program requirements, routing control and response forces notification. It shall be emphasized that so far we do not know for sure the amount of nuclear and radioactive materials inside the Shelter Object which is

Physical protection of power reactors

International Nuclear Information System (INIS)

Darby, J.L.

1979-01-01

Sandia Laboratories has applied a systematic approach to designing physical protection systems for nuclear facilities to commercial light-water reactor power plants. A number of candidate physical protection systems were developed and evaluated. Focus is placed on the design of access control subsystems at each of three plant layers: the protected area perimeter, building surfaces, and vital areas. Access control refers to barriers, detectors, and entry control devices and procedures used to keep unauthorized personnel and contraband out of the plant, and to control authorized entry into vital areas within the plant

The Physical Protection of Nuclear Material

International Nuclear Information System (INIS)

1993-09-01

Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international cooperation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and materials, particularly when such materials are transported across national frontiers [es

The Physical Protection of Nuclear Material

International Nuclear Information System (INIS)

1993-09-01

Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international cooperation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and materials, particularly when such materials are transported across national frontiers [fr

The Physical Protection of Nuclear Material

International Nuclear Information System (INIS)

1993-01-01

Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international cooperation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and materials, particularly when such materials are transported across national frontiers

The Physical Protection of Nuclear Material

International Nuclear Information System (INIS)

1993-09-01

Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international cooperation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and materials, particularly when such materials are transported across national frontiers

Advanced physical protection systems for nuclear materials

International Nuclear Information System (INIS)

Jones, O.E.

1976-01-01

Because of the increasing incidence of terrorism, there is growing concern that nuclear materials and facilities need improved physical protection against theft, diversion, or sabotage. Physical protection systems for facilities or transportation which have balanced effectiveness include information systems, access denial systems, adequate and timely response, recovery capability, and use denial methods for despoiling special nuclear materials (SNM). The role of these elements in reducing societal risk is described; however, it is noted that, similar to nuclear war, the absolute risks of nuclear theft and sabotage are basically unquantifiable. Sandia Laboratories has a major US Energy Research and Development Administration (ERDA) role in developing advanced physical protection systems for improving the security of both SNM and facilities. These activities are surveyed in this paper. A computer simulation model is being developed to assess the cost-effectiveness of alternative physical protection systems under various levels of threat. Improved physical protection equipment such as perimeter and interior alarms, secure portals, and fixed and remotely activated barriers is being developed and tested. In addition, complete prototype protection systems are being developed for representative nuclear facilities. An example is shown for a plutonium storage vault. The ERDA safe-secure transportation system for highway shipments of all significant quantities of government-owned SNM is described. Adversary simulation as a tool for testing and evaluating physical protection systems is discussed. Finally, a list of measures is given for assessing overall physical protection system performance. (author)

Advanced physical protection systems for nuclear materials

International Nuclear Information System (INIS)

Jones, O.E.

1975-10-01

Because of the increasing incidence of terrorism, there is growing concern that nuclear materials and facilities need improved physical protection against theft, diversion, or sabotage. Physical protection systems for facilities or transportation which have balanced effectiveness include information systems, access denial systems, adequate and timely response, recovery capability, and use denial methods for despoiling special nuclear materials (SNM). The role of these elements in reducing societal risk is described; however, it is noted that, similar to nuclear war, the absolute risks of nuclear theft and sabotage are basically unquantifiable. Sandia Laboratories has a major Energy Research and Development Administration (ERDA) role in developing advanced physical protection systems for improving the security of both SNM and facilities. These activities are surveyed. A computer simulation model is being developed to assess the cost-effectiveness of alternative physical protection systems under various levels of threat. Improved physical protection equipment such as perimeter and interior alarms, secure portals, and fixed and remotely-activated barriers is being developed and tested. In addition, complete prototype protection systems are being developed for representative nuclear facilities. An example is shown for a plutonium storage vault. The ERDA safe-secure transportation system for highway shipments of all significant quantities of government-owned SNM is described. Adversary simulation as a tool for testing and evaluating physical protection systems is discussed. A list of measures is given for assessing overall physical protection system performance. (auth)

An integrated system for physical protection

International Nuclear Information System (INIS)

Kumar, Ranajit

2001-01-01

An Integrated Physical Protection System (IPPS) was developed for the consolidation of all sub systems, sensors and elements related to physical protection for an efficient and effective security environment of a facility. An effective physical protection system discharges the functions of detection, delay, communication, response, access control etc. IPPS performs, controls and monitors all the above functionality and helps in taking quick action on occurrence of unusual incidents by instantly reporting the incident in easily understandable audio, video, graphical and textual format and also by initiating automatic interactions among sub-systems

Physical protection

International Nuclear Information System (INIS)

Myre, W.C.; DeMontmollin, J.M.

1989-01-01

Serious concern about physical protection of nuclear facilities began around 1972. R and D was initiated at Sandia National Laboratories which had developed techniques to protect weapons for many years. Special vehicles, convoy procedures, and a communications system previously developed for weapons shipments were improved and extended for shipments of other sensitive materials. Barriers, perimeter alarms, portal and internal control systems were developed, tested, and published in handbooks and presented at symposia. Training programs were initiated for U.S. and foreign personnel. Containment and surveillance techniques were developed for the IAEA. Presently emphasis is on computer security, active barriers, and techniques to prevent theft or sabotage by ''insiders''

Physical macroeconomics: a demarcation of accounting and analysis

Energy Technology Data Exchange (ETDEWEB)

Hahn, M. de [Statistics Netherlands, Voorburg (Netherlands)

2001-07-01

This paper provides a general discussion on physical flow accounting methodology. The discussion is limited to those methods primarily applied to the national economy level. Specific attention is given to the demarcation of accounting versus analysis. The primary goal of statistics and accounting is to provide an acceptable level of 'descriptiveness' and 'neutrality' in its representation of facts. On the other hand, modelling or analysis usually relies on assumptions of a much wider scale, for example in relation to human behaviour, or by the necessity of ceteris paribus clauses in partial analysis. While accounting usually provides answers on past events, analysis is often ex-ante oriented. A number of accounting methods are reviewed on the basis of their accounting scopes and indicator proposals. In general the accounting frameworks are rather complementary or at least not contradictory but inconsistencies emerge in some of the indicators that are derived from the accounts. The paper further elaborates on the significance of the national accounts in this field of research. National accounting concepts and definitions contributes to a sound demarcation of the (national) economy, which appears equally valid for physical representations of a national economy. This demarcation also supports the sound allocation of environmental burdens to specific national or regional economies. At the same time, the economic relevance of physical flows is to a large extent exposed by their connection to specific economic (production and consumption) processes and concomitant transactions. This linkage, as for example accommodated in a National Accounting Matrix including Environmental Accounts (NAMEA) provides in this respect a useful statistical framework that provides a consistent comparison of environmental burdens to economic benefits (or environmental benefits to economic costs)

Constructions of accountability in child protection workers decision-making processes

DEFF Research Database (Denmark)

Schrøder, Ida Marie

2014-01-01

collected from three Danish local governments and consists of 24 qualitative interviews with child protection workers, leaders and economic consultants, 12 observations of team meetings and a quantitative survey of 150 cases. The study ends summer 2014 and the results of the research will be utilized...... construction of accountability as relational effects of these new forms of accounting practice. The paper draws on the preliminary results from a 2 ½ year mixed method study of how budgeting and accounting practice influences the processes of decision-making in child protection work. The data has been...... systems – such as setting standards or deciding on the delegation of decision-making authority. Using Actor-network theory as a methodological and analytical approach, it furthermore becomes clear how the types of accountability are enacted as effects, not only by the technologies offered to support...

UNHCR and the pursuit of international protection: accountability through technology?

DEFF Research Database (Denmark)

Jacobsen, Katja Lindskov; Sandvik, Kristin B.

2018-01-01

-bureaucratic practices shape conceptions of international refugee protection. We do this by examining the evolving roles of results-based management (RBM), biometrics and cash-based interventions as ‘accountability technologies’ in the United Nations High Commissioner for Refugees’ international protection efforts...... of protection (ie the problem to be addressed), we also show what dimensions of protection get omitted in this co-production of technical solutions and socio-political problems....

Leveraging physical protection technology for international safeguards applications

International Nuclear Information System (INIS)

Glidewell, Don

2001-01-01

Full text: In an effort to improve the effectiveness, efficiency, and reliability of equipment used for International Safeguards, the European Safeguards Research and Development Association (ESARDA) Reflection Group requested the ESARDA Containment and Surveillance Working Group to investigate the feasibility of employing physical protection technologies for international safeguards applications. The physical protection market has traditionally been much greater than the international safeguards market. Consequently, physical protection technology has been subjected to greater testing and evaluation, and has enjoyed much greater real world experience. The larger market yields economies of scale, and the greater testing and experience should arguably result in improved reliability. This paper will compare requirements for physical protection versus international safeguards equipment, and identify types of physical protection equipment, which have potential for safeguards applications. It will evaluate both Commercial Off-the-Shelf (COTS) and non-COTS equipment. Finally, for selected physical protection equipment, the paper will evaluate the degree of modification that would be needed to make it acceptable for safeguards applications. (author)

Steps to implement the legal and regulatory infrastructure for physical protection of nuclear material in Peru

International Nuclear Information System (INIS)

Ramirez Quijada, R.

2001-01-01

Full text: The signature of Peru to become part of the Convention of Physical Protection of Nuclear Material in 1995 has implied an obligation to formalize the legal and regulatory infrastructure for this purpose. As first step, physical protection measures were formalized on the two nuclear facilities: one critical assembly of zero power (RP0) and another research reactor of 10 Mw thermal power (RP10). Both of the installations use low enriched uranium nuclear fuel (Material and Testing Material - MTR type). On the other side, even thorium was put in perspective to control; currently it is being used for non-nuclear purposes and has not been included inside the physical protection measures. Its physical and chemical form and its small quantity do not warrant for applying the Convention. The physical protection measures implemented in the research reactor are well depicted and it is concluded that the physical protection system meets the recommendations of INFCIRC/225/Rev.3. The critical facility (RP0), as having nuclear material categorized III, has implemented a less restrictive system but enough to meet the requirements. In 1999 an evaluation of all physical protection systems was performed for these two nuclear installations. This evaluation took into account the recommendations of INFCIRC/225/Rev.4. The general conclusion was that the performance of physical protection system was suitable to the categories of nuclear material - II and III - and that the installations where nuclear material is used were suitably protected against non-authorized or illegal removal of nuclear material and sabotage. However, some of components of the system were not appropriately working and could make all of the system weak. Another of the identified problems was the lack of a rule on physical protection and also the lack of the Design Basis Threat, although this fact was well known due the social conditions in the country. The second undertaking has been to prepare the rule on

Strengthening global physical protection practices; gaining better information on national practices for protection of weapons-usable material. Keynote address/session 3

International Nuclear Information System (INIS)

Bunn, G.; Rinne, R.

2001-01-01

Full text: Unlike the Non-Proliferation Treaty requirement that non-nuclear-weapon parties provide 'safeguards' information to the IAEA on their nuclear materials and their state systems for accounting and control, there is no related requirement to provide information on state systems of physical protection. A review of 1997 IAEA and Stanford physical protection conference proceedings showed both the absence of information on important practices from many states and the great variation in practices from state to state. Besides the lack of internationally required standards for domestic protection, reasons for the variations described in Stanford-Sandia National Laboratories research include: differences in states' perceptions of the threats to their materials; differences in their abilities to pay the cost of stronger physical protection; differences in their laws and regulatory practices in general; and differences in their cultural attitudes - for example, attitudes toward whether to arm personnel guarding weapon-usable material or to require clearances for personnel with access to such material. The information presented to the 1997 IAEA and Stanford conferences was supplied voluntarily. The two global documents which provide norms for physical protection do not require submission of such information. These are the 1980 Convention on Physical Protection of Nuclear Material and the 1999 IAEA INFCIRC/225/Rev.4. This means that, without bilateral cooperation, no state can find out how other states are protecting their nuclear material. Yet, as IAEA Director General El Baradei has said, '[I]t is not a matter of indifference to other States whether and to what extent [physical protection] responsibility is fulfilled. ...The need for international cooperation becomes evident in situations - where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter and defeat hostile actions against nuclear

International physical protection standards: support for development and implementation

International Nuclear Information System (INIS)

Soo Hoo, M.S.

2002-01-01

Full text: Since 1972, the IAEA has been a recognized organization in promoting the development of international standards on the physical protection of nuclear materials. This responsibility has continued through the present in the 1999 publication of the fourth revision of INFCIRC/225, the physical protection of nuclear material and nuclear facilities and in being the repository for the convention on the physical protection of nuclear material which was originally published in 1980 as INFCIRC/274. The IAEA has also published other reference documents in support these two standards. With changing world events and greater concern for the physical protection of nuclear materials and facilities, IAEA member states have increased IAEA physical protection responsibilities. Currently, the IAEA is serving as the secretariat for drafting revisions to the physical protection convention. The proposed revisions will strengthen international physical protection standards through the incorporation of physical protection fundamentals that should apply to all nuclear materials in international or domestic use, storage and transport. Furthermore, the physical protection fundamentals would also extend to include nuclear facilities. Presently, the physical protection convention applies only to nuclear materials that are in international transport. To complement efforts to develop and promote international physical protection standards, the IAEA is actively involved in assisting member states with the implementation of the standards. This is accomplished through the delivery of training courses, workshops and hosting other international forums for the exchange of information. Through review services such as the international physical protection advisory service (IPPAS), the IAEA provides advice to member states on the application of international standards at national and facility-specific levels. These services can be followed up with technical support to implement the

Application of a Physical Protection to HANARO

International Nuclear Information System (INIS)

Ryu, Jeong-Soo; Park, Cheol; Cho, Yeong-Garp; Lee, Jung-Hee; Jung, Hoan-Sung

2006-01-01

After the fearful terror attack on September 11, 2001, in USA, international nuclear society has strengthened its physical protection system against nuclear reactors to prevent the theft of nuclear materials and its ill-intended application, and the destruction of nuclear installations and the obstruction of an operation in such facilities. In the nuclear agreements between Korea and USA or other countries, the observance of the IAEA recommendations on a physical protection for a nuclear installation and nuclear materials is clearly requested. Since IAEA recommendation on physical protection was revised more strictly, KAERI made a plan to follow the strengthened IAEA recommendation and to improve the physical protection for the HANARO and fuel fabrication building. In response to the plan for the improvement of the physical protection system, the reactor hall, control room, and fuel fabrication building was established as the boundary of a physical protection concept. Accordingly, the existing doors were recommended to be replaced with new security doors against a terror attack. Therefore, security doors reflecting the design characteristics of the HANARO have been developed to replace the existing doors, and the design, fabrication, driving and leak tight tests were carried out before an installation. For securing a safety and easy operation of the security doors, HANARO access control system (HANACS) has been developed to perform a real time communication and identification of persons for an access control

Observations on physical protection methods for protecting against unauthorized acts by an insider

International Nuclear Information System (INIS)

Ericson, D.M.; Goldman, L.A.; Lobner, R.R.

1983-01-01

Two basic approaches have evolved over the past several years for physical protection against sabotage by insiders. One, area-type physical protection, involves the use of access controls at area boundaries. Current practices at nuclear power plants generally fall into this category. The second, component-level physical protection, involves hardware at individual components as well as access controls at the boundary. The area-type physical protection concepts include team, area, and operational zoning. Team zoning requires the formation of multiperson teams that must be used to gain access to vital areas. Area zoning divides the plant into two or more zones, each of which is operated and maintained by separate, dedicated teams. Operational zoning is a closed-loop access control system that permits an initial vital area access, but blocks access to certain other vital areas until the operability of equipment in the first area is verified by test or inspection. Component-level physical protection is also a closed-loop system in which both area and component access are monitored. Each of the above measures can provide effective protection against an insider in certain instances, but each has weaknesses that must be recognized. An approach for protection against the insider is to take the most promising features of each of the above physical protection measures and supplement these capabilities with damage control and design changes as appropriate for a particular plant

Accounting conventions for discounting in the optimisation of protection

International Nuclear Information System (INIS)

Fleishman, A.B.

1983-01-01

Some of the implications which arise from the use of accounting conventions in the cost benefit framework for optimization of radiation protection are briefly examined. Some accounting techniques which appear not to discount future detriment costs do so, in fact, at a hidden fixed rate; others give a free choice over whether to discount and at what rate. (U.K.)

About role of human factors in the building of physical protection system

International Nuclear Information System (INIS)

Ivanov, P.

2001-01-01

factors: state ideology crisis, deformation of norms of behavior and spiritual values, and etc. In addition, a new problem suddenly appeared related to the safety and security of the energy complex, that is: uncontrolled processes such as: non-payments, debts on salary for a several month period; all these factors affect negatively the level of safety and security. It is clear that in such a difficult situation the role of an individual is increasing. There is a sufficient number of arguments to affirm that the ensuring of the physical protection from the point of view of a human factor lays the basis for the successful solution of security problems in general. The fundamental documents regulating the nuclear material non-proliferation aspects, i.e., Convention on Physical Protection of Nuclear Materials, the revision of which is being conducted now under the IAEA's aegis, and the finalized IAEA's Recommendation INFCIRC/225/Rev.4, are used as the standard against which the physical protection level is assessed. With regard to the nuclear installation that can be subject to sabotage, the appropriate physical protection measures should be implemented regardless of the category of containing nuclear material. The act of nuclear sabotage can lead to a radiological hazard for the population. The convention and the IAEA's Recommendations pay particular attention to the human factor considering it as a basic executor of functions related to the unauthorized actions or activities on their prevention. Taking into account that nuclear terrorism does not have any statistics, while reviewing either options of threats we proceed from the tentative scenario of the terrorists' actions. Full or absolute security cannot be achieved. In order to make a comprehensive evaluation of the terrorism significance, we have to take into account political, moral and practical considerations. However, due to the lack of opportunities to assess the threat, the following approach is applied: we do not

A bustling academic reactor creates challenges and opportunities in the area of physical protection

International Nuclear Information System (INIS)

Boeck, H.; Villa, M.; Standley, V.

2001-01-01

The 250 kW TRIGA research reactor is located at the Atominstitut Vienna, Austria, only a few subway stations from the city centre of Vienna. Its main purpose is the training of university students in the field of nuclear engineering and radiation protection as well as in radiochemistry and neutron- and solid-state physics. The existing facility is visited during a normal academic year by about 300 persons per day falling into seven different categories including fully employed staff, students occasionally visiting a seminar, and IAEA personnel from all over the world. These different groups have to be accounted for daily and are separated into different categories in view of security and physical protection. (author)

A New Physical Protection System Design and Evaluation Process

Energy Technology Data Exchange (ETDEWEB)

Lim, Heoksoon; Kim, Myungsu; Bae, Yeongkyoung; Na, Janghwan [KHNP-CRI, Daejeon (Korea, Republic of)

2014-10-15

International Atomic Energy Agency(IAEA) had established security-related department and has been strengthening security measures against possible sabotage. IAEA enforces the recommendations for the physical protection of NPPs in the INFCIRC/ 225/Rev.5 to the member states and U.S. NRC also enforces the similar requirements in 10 CFR 73.55. Thus, in order to let Korean NPPs meet the new requirements in INFCIRC/225/Rev.5 or U.S. NRC requirements, Korea nuclear licensee should develop or establish appropriate physical protection system (PPS) design methods for the physical protection of the operating NPPs and new NPPs. KHNP is doing the project of 'Development of APR1400 Physical Protection System Design (2012- 2015, KHNP/KAERI /KEPCO E-C)'. This paper describes overview of a physical protection system (PPS) design and evaluation for an advanced nuclear power plant. It found that a new physical protection system (PPS)design and evaluation. KHNP is doing the project of Physical Protection System design according to U.S. NRC requirements and IAEA requirements in INFCIRC /225 /Rev.5 and will complete by 7.31, 2015 for development of APR1400 Physical Protection System. After completing this project, the results of project are expected to apply new NPPs.

Proceedings of the Tenth Radiation Physics and Protection Conference

International Nuclear Information System (INIS)

2011-01-01

The publication has been set up as proceedings of the Radiation Physics and Protection Conference.. The conference consists Natural Radiation Sources; Radiation Detection and Measurements; Applied Radiation Physics; Radiation Medical Physics and Biophysics; Radiation Dosimetry; Operational Radiation Protection; Radiation Shielding; Transport of Radioactive Materials; Nuclear and Radiation Physics; Medical Physics and Public Protection Against Radiological Attack. This conference consists of 402 p., figs., tabs., refs.

School Accountability and Youth Obesity: Can Physical Education Mandates Make a Difference?

Directory of Open Access Journals (Sweden)

Helen Schneider

2013-01-01

Full Text Available This paper explores the effect of accountability laws under No Child Left Behind Act (NCLB on obesity rates among school-aged children in the United States. Our results show that pressures due to school closures for poor performance, rewards for good performance, and assistance to schools that lag behind lead to lower levels of vigorous physical activity. This effect is significant for high school children only. We find no significant impact of school accountability laws on children in grades 3 through 8 after state characteristics such as state obesity rate are taken into account. We also find that state physical education mandates increase physical activity for children in grades 3 through 8 and mitigate the negative effect of accountability pressures on physical activity at the high school level where accountability pressures are most effective at decreasing physical activity and increasing obesity. The study shows that physical education mandates play an important role in promoting physical activity for all grades in our sample.

A Study on Establishment of Unacceptable Radiological Consequence (URC) for Physical Protection against Sabotage

Energy Technology Data Exchange (ETDEWEB)

Jung, Myungtak; Koh, Moonsung; Lee, Youngwook; Jo, Kwang Ho [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

2014-05-15

The international community has recommended that a graded approach should be applied to the establishment of the domestic regime for physical protection in accordance with fundamental principle H of the amended Convention on Physical Protection of Nuclear Material (CPPNM) and INFCIRC/225/rev.5. In Korea, Currently, the graded approach to unauthorized removal of nuclear material is divided into three categories (Category Ι, Category ΙΙ, Category ΙΙΙ) based on the IAEA INFCIRC/225/rev.5. Moreover, depending on the categorization of nuclear material, physical protection measures against unauthorized removal are also clearly categorized. But in the case of physical protection against sabotage, the graded approach to the physical protection measures is not applied since Unacceptable Radiological Consequence (URC) for identifying sabotage target and level is not determined. URC can be established based on either dose limit or design limit. The report by Sandia National Lab. in USA specifies that core damage is used for URC. Calculation of an exact dose is based on various assumptions and processes and subsequently increases uncertainty. Therefore, using design limit for decreasing uncertainty is more effective than using dose limit. In order to apply the graded approach to physical protection against sabotage, we have taken into Fundamental principle H : Physical protection requirements should be based on a graded approach, taking into account the current evaluation of the threat, the relative attractiveness, the nature of the material and potential consequences associated with the unauthorized removal of nuclear material and with the sabotage against nuclear material of nuclear facilities consideration legal and institutional standards on domestic and international radiological consequences and intended to provide a reference for the URC establishment by the State. The study on various standards led to the conclusion that each value has advantages and

Protecting the Library and Its Resources. A Guide to Physical Protection and Insurance.

Science.gov (United States)

Johnson, Edward M., Ed.

The first part of this manual contains information about providing physical protection for libraries and is organized into the following chapters--(1) types of physical losses, (2) the prevention of losses, (3) fire defense measures, (4) fire protection equipment, and (5) fire protection in library planning. The second part is concerned with…

Protecting plutonium: physical safeguards

International Nuclear Information System (INIS)

Ney, J.F.

1975-10-01

In the development of physical protection systems, objectives for improving overall performance include the following: (1) Increase the time required for the malefactor to achieve his goal; (2) decrease the time required for detection of malevolent activities; (3) reduce the time for adequate response force arrival; (4) increase the capability to neutralize the malefactor; (5) reduce the total protection system costs, while increasing the level of protection; (6) improve acceptance levels (social, environmental, legal, and institutional); and (7) increase nuclear fuel cycle safety. Fortunately, there is sufficient lead time and technical base to explore and develop new protection system concepts so that a completely integrated and tested protection system capable of providing unprecedented levels of security can be available when needed. Although it will be impossible to completely eliminate all risks, it should be both possible and economically feasible to install protection systems which will deter or prevent a malefactor from using the nuclear fuel cycle to disrupt society

Physical protection equipment study. Final report

International Nuclear Information System (INIS)

Haberman, W.

1977-06-01

This report summarizes the work performed by MITRE for the U.S. Nuclear Regulatory Commission. The major products of this effort are a Catalog of Physical Protection Equipment, a Guide for Evaluation of Physical Protection Equipment, a book of Reference Materials, and a set of guidelines for use in the development of a methodology for measuring levels of security system effectiveness. A summary of recommendations resulting from this study is also presented

Protective and harmful effects of physical activity for low back pain

DEFF Research Database (Denmark)

Pinheiro, Marina B.; Ferreira, Manuela L; Refshauge, Kathryn M

2016-01-01

Low back pain (LBP) is a major health problem globally, but approaches to prevention are not yet clearly identified because modifiable risk factors are not well established. Although physical activity is one promising modifiable risk factor, it is still not known what types and doses of physical...... activity are protective or harmful for LBP. The aim of this study is to establish the feasibility of a definitive cohort study that will investigate the effects of different types and doses of physical activity on the risk of developing recurrent LBP while accounting for genetic factors....... This will be a pilot longitudinal twin study and twins will be recruited from the Australian Twin Registry, and will be followed over 1 year. Thirty adult complete twin pairs with a history of LBP, but symptom free at recruitment, will be included. Data on physical activity (predictor) will be collected using four...

Upgrade of the Nuclear Material Protection, Control and Accounting System at the VNIIEF Industrial Zone

International Nuclear Information System (INIS)

Lewis, J.C.; Maltsev, V.; Singh, S.P.

1999-01-01

The Industrial Zone at the Russian Federal Nuclear Center/All-Russian Scientific Research Institute of Experimental Physics (RFNC/VNEEF) consists of ten guarded areas with twenty two material balance areas (A and As). The type of facilities in the Industrial Zone include storage sites, machine shops, research facilities, and training facilities. Modernization of the Material Protection, Control and Accounting (MPC and A) System at the Industrial Zone started in 1997. This paper provides a description of, the methodology/strategy used in the upgrade of the MFC and A system

Protecting the Accounting Information in the Conditions of Outsourcing with Use of the Information-Computer Technologies

Directory of Open Access Journals (Sweden)

Liakhovych Halyna І.

2017-12-01

Full Text Available The article is aimed at disclosing measures of protection of accounting information in the conditions of outsourcing, using modern information-computer technologies. On the basis of processing of scientific works, the approaches to development of system of protection of the accounting information were generalized, measures of protection were grouped by users of data with definition of subjects of provision in the conditions of outsourcing. Special attention is paid to the characterization and content of internal organizational measures of protection of accounting information (normative, personnel, structural. The complex of measures on protection of the information of accountance for large and small-size enterprises has been defined. The prospect of further research is the issue of information risk management in accounting outsourcing.

IMPORTANCE OF MATERIAL BALANCES AND THEIR STATISTICAL EVALUATION IN RUSSIAN MATERIAL, PROTECTION, CONTROL AND ACCOUNTING

International Nuclear Information System (INIS)

Fishbone, L.G.

1999-01-01

While substantial work has been performed in the Russian MPC and A Program, much more needs to be done at Russian nuclear facilities to complete four necessary steps. These are (1) periodically measuring the physical inventory of nuclear material, (2) continuously measuring the flows of nuclear material, (3) using the results to close the material balance, particularly at bulk processing facilities, and (4) statistically evaluating any apparent loss of nuclear material. The periodic closing of material balances provides an objective test of the facility's system of nuclear material protection, control and accounting. The statistical evaluation using the uncertainties associated with individual measurement systems involved in the calculation of the material balance provides a fair standard for concluding whether the apparent loss of nuclear material means a diversion or whether the facility's accounting system needs improvement. In particular, if unattractive flow material at a facility is not measured well, the accounting system cannot readily detect the loss of attractive material if the latter substantially derives from the former

Physical protection of radioactive material in transport

International Nuclear Information System (INIS)

1975-01-01

Safety in the transport of radioactive material is ensured by enclosing the material, when necessary, in packaging which prevents its dispersal and which absorbs to any adequate extent any radiation emitted by the material. Transport workers, the general public and the environment are thus protected against the harmful effects of the radioactive material. The packaging also serves the purpose of protecting its contents against the effects of rough handling and mishaps under normal transport conditions, and against the severe stresses and high temperatures that could be encountered in accidents accompanied by fires. If the radioactive material is also fissile, special design features are incorporated to prevent any possibility of criticality under normal transport conditions and in accidents. The safe transport requirements are designed to afford protection against unintentional opening of packages in normal handling and transport conditions and against damage in severe accident conditions; whereas the physical protection requirements are designed to prevent intentional opening of packages and deliberate damage. This clearly illustrates the difference in philosophical approach underlying the requirements for safe transport and for physical protection during transport. This difference in approach is, perhaps, most easily seen in the differing requirements for marking of consignments. While safety considerations dictate that packages be clearly labelled, physical protection considerations urge restraint in the use of special labels. Careful consideration must be given to such differences in approach in any attempt to harmonize the safety and physical protection aspects of transport. (author)

Collaborative Russian-US work in nuclear material protection, control and accounting at the Institute of Physics and Power Engineering. 3: Emphasis on site-wide issues

International Nuclear Information System (INIS)

Kuzin, V.V.; Pshakin, G.M.; Belov, A.P.

1997-07-01

During 1997, collaborative Russian-US nuclear material protection, control, and accounting (MPC and A) tasks at the Institute of Physics and Power Engineering (IPPE) in Obninsk, Russia are focusing increasingly on site-wide issues, though there is continued work at several major facilities: the Fast Critical Facility, the Technological Laboratory for Fuel Fabrication, and the (new and existing) Central Storage Facility. The collaborative work is being done with US Department of Energy National Laboratories. IPPE's emphasis on site-wide issues has resulted in the formation of a separate division for MPC and A. This new division reports directly to the IPPE Chief Engineer. It is a separate scientific and engineering operating division responsible for coordination and harmonization of MPC and A at IPPE, as well as for audit, assessment and inspection. By virtue of the organizational independence of this new division, IPPE has significantly strengthened the role of MPC and A. Two specific site-wide accomplishments are the consolidation of nuclear material from many buildings to a smaller number, and, as a major part of this strategy, the construction of a nuclear island surrounding the Fast Critical Facility and the new Central Storage Facility. Most of IPPE's weapons-grade nuclear materials will be concentrated within the nuclear island. The paper summarizes the following technical elements: computerized accounting, bar coding, weight measurements, gamma-ray measurements, tamper indicating devices, procedures for physical inventory taking and material balance closure, and video monitoring systems for storage and critical assembly areas

Physical protection evaluation methodology program development and application

International Nuclear Information System (INIS)

Seo, Janghoon; Yoo, Hosik

2015-01-01

It is essential to develop a reliable physical protection evaluation methodology for applying physical protection concept to the design stage. The methodology can be used to assess weak points and improve performance not only for the design stage but also for nuclear facilities in operation. Analyzing physical protection property of nuclear facilities is not a trivial work since there are many interconnected factors affecting overall performance. Therefore several international projects have been organized to develop a systematic physical protection evaluation methodology. INPRO (The International Project on Innovative Nuclear Reactors and Fuel Cycles) and GIF PRPP (Generation IV International Forum Proliferation Resistance and Physical Protection) methodology are among the most well-known evaluation methodologies. INPRO adopts a checklist type of questionnaire and has a strong point in analyzing overall characteristic of facilities in a qualitative way. COMPRE program has been developed to help general users apply COMPRE methodology to nuclear facilities. In this work, COMPRE program development and a case study of the hypothetical nuclear facility are presented. The development of COMPRE program and a case study for hypothetic facility is presented in this work. The case study shows that COMPRE PP methodology can be a useful tool to assess the overall physical protection performance of nuclear facilities. To obtain meaningful results from COMPRE PP methodology, detailed information and comprehensive analysis are required. Especially, it is not trivial to calculate reliable values for PPSE (Physical Protection System Effectiveness) and C (Consequence), while it is relatively straightforward to evaluate LI (Legislative and Institutional framework), MC (Material Control) and HR (Human Resources). To obtain a reliable PPSE value, comprehensive information about physical protection system, vital area analysis and realistic threat scenario assessment are required. Like

Physical protection evaluation methodology program development and application

Energy Technology Data Exchange (ETDEWEB)

Seo, Janghoon; Yoo, Hosik [Korea Institute of Nuclear Non-proliferation and Control, Daejeon (Korea, Republic of)

2015-10-15

It is essential to develop a reliable physical protection evaluation methodology for applying physical protection concept to the design stage. The methodology can be used to assess weak points and improve performance not only for the design stage but also for nuclear facilities in operation. Analyzing physical protection property of nuclear facilities is not a trivial work since there are many interconnected factors affecting overall performance. Therefore several international projects have been organized to develop a systematic physical protection evaluation methodology. INPRO (The International Project on Innovative Nuclear Reactors and Fuel Cycles) and GIF PRPP (Generation IV International Forum Proliferation Resistance and Physical Protection) methodology are among the most well-known evaluation methodologies. INPRO adopts a checklist type of questionnaire and has a strong point in analyzing overall characteristic of facilities in a qualitative way. COMPRE program has been developed to help general users apply COMPRE methodology to nuclear facilities. In this work, COMPRE program development and a case study of the hypothetical nuclear facility are presented. The development of COMPRE program and a case study for hypothetic facility is presented in this work. The case study shows that COMPRE PP methodology can be a useful tool to assess the overall physical protection performance of nuclear facilities. To obtain meaningful results from COMPRE PP methodology, detailed information and comprehensive analysis are required. Especially, it is not trivial to calculate reliable values for PPSE (Physical Protection System Effectiveness) and C (Consequence), while it is relatively straightforward to evaluate LI (Legislative and Institutional framework), MC (Material Control) and HR (Human Resources). To obtain a reliable PPSE value, comprehensive information about physical protection system, vital area analysis and realistic threat scenario assessment are required. Like

Developmental Physical Education Accountability; Volume I.

Science.gov (United States)

Guarnieri, Barbara; Sandeen, Cecile

Presented in the first of a two volume series is a developmental physical education checklist which provides teachers of trainable mentally retarded students with a permanent and accountable record of pupil progress and needs. The checklist is intended to be used with the accompanying volume of curricular activities in a nongraded enviroment for…

Physical protection concepts of nuclear materials. The French experience

International Nuclear Information System (INIS)

Arnaud, G.; Artaud, R.

1995-01-01

As the nuclear energy was being developed, it appeared necessary to set up protections against its potential hazards, that should be more complete and elaborate than those implemented on the other industrial installations. This had to be done both in the safety field to prevent the environment and the populations from the consequences of severe casualties, and in the security field to avoid the risk of proliferation and limit to an acceptable level the results of voluntarily provoked accidents and sabotages. Taking advantage of the gathered experience, this document gives consideration to the concepts used in France in order to ensure the physical protection of the nuclear materials. The following topics are tackled: context inside which are envisaged the specific measures, coherence with the general dispositions taken to protect industrial installations, importance and limitations of the part played by the regulations, respective responsibilities of the plant operators and the public authorities, compromise between objectives in view and means to implement, adjustment between the physical protection system and the operating requirements. In addition, the ways in which these systems should be implemented are discussed, underlining the necessity to make progressive steps under a permanent will, in order, first, to update and bring under conformity the old installations, and second, to ensure the maintenance of the systems, taking account of the evolutions of needs and techniques. Those points are commented on examples taken among the different types of installations to be found in France, showing the differences in approach coming from the type and the age of the facilities, and giving the present trends for the new plants. (authors). 1 annexe

Medical Physics expert and competence in radiation protection

International Nuclear Information System (INIS)

Vano, E.; Lamn, I. N.; Guerra, A. del; Van Kleffens, H. J.

2003-01-01

The Council Directive 97/43/EURATOM on health protection of individuals against the dangers of ionizing radiation in relation to medical exposure, defines the Medical Physical Expert as an expert in radiation physics or radiation technology applied to exposure, within the scope of the Directive, whose training and competence to act is recognized by the competent authorities; and who, as appropriate, acts or gives advice on patient dosimetry, on the development and use of complex techniques and equipment, on optimization, on quality assurance, including quality control, and on other matters relating to radiation protection, concerning exposure within the scope of this Directive. As a consequence, it might be implied that his competence in radiation protection should also cover the staff and the public. In fact, the training programmes of medical physics experts include all the aspects concerning these topics. Some confusion could arise in the medical area when the Qualified Expert defined in the Council Directive 96/29/Euratom laying down basic safety standards for the protection of the health of workers and the general public against the dangers arising from ionizing radiation is considered. The Qualified Expert is defined as a person having the knowledge and training needed to carry out physical, technical or radiochemical tests enabling doses to be assessed, and to give advice in order to ensure effective protection of individuals and the correct operation of protective equipment, whose capacity to act a qualified expert is recognized by the competent authorities. A qualified expert may be assigned the technical responsibility for the tasks of radiation protection of workers and members of the public. In Europe, the Qualified Expert is acting at present in the Medical Area in countries where there are not enough Medical Physics Experts or in countries where this role was established before the publication of the Council Directive 97/43/EURATOM. Now, the coherent

Implementing Physical Protection Education for an Enhanced Nuclear Security Culture

Energy Technology Data Exchange (ETDEWEB)

Lee, Jeong Ho; Kim, Hyun Chul; Shin, Ick Hyun; Lee, Hyung Kyung; Choe, Kwan Kyoo [KINAC, Daejeon (Korea, Republic of)

2013-10-15

In this paper, we are going to outline our efforts and experiences at implementing physical protection education. KINAC (as the only designated educational institute) places great effort in delivering an effective and a high-quality education program for physical protection. We have also provided a way for nuclear operators to share the lessons they have gained through their own experiences. We made physical protection education an important communication channel, not only among nuclear operators but also between operators and a regulatory body. There is growing attention given to education and training on the subject of physical protection in order to enhance the nuclear security culture. The IAEA recommends that all personnel in organizations directly involved with the nuclear industry receive regularly education in physical protection according to the recently revised INFCIRC/225/Rev.5. The Korea Institute of Nuclear Nonproliferation and Control (KINAC) and the Nuclear Safety and Security Commission (NSSC), which are mainly responsible for the national nuclear security regime, have already recognized the importance of education and training in physical protection. The NSSC enacted its decree on physical protection education and training in 2010. KINAC was designated as the first educational institute in 2011 and implemented physical protection education as mandatory from 2012.

Implementing Physical Protection Education for an Enhanced Nuclear Security Culture

International Nuclear Information System (INIS)

Lee, Jeong Ho; Kim, Hyun Chul; Shin, Ick Hyun; Lee, Hyung Kyung; Choe, Kwan Kyoo

2013-01-01

In this paper, we are going to outline our efforts and experiences at implementing physical protection education. KINAC (as the only designated educational institute) places great effort in delivering an effective and a high-quality education program for physical protection. We have also provided a way for nuclear operators to share the lessons they have gained through their own experiences. We made physical protection education an important communication channel, not only among nuclear operators but also between operators and a regulatory body. There is growing attention given to education and training on the subject of physical protection in order to enhance the nuclear security culture. The IAEA recommends that all personnel in organizations directly involved with the nuclear industry receive regularly education in physical protection according to the recently revised INFCIRC/225/Rev.5. The Korea Institute of Nuclear Nonproliferation and Control (KINAC) and the Nuclear Safety and Security Commission (NSSC), which are mainly responsible for the national nuclear security regime, have already recognized the importance of education and training in physical protection. The NSSC enacted its decree on physical protection education and training in 2010. KINAC was designated as the first educational institute in 2011 and implemented physical protection education as mandatory from 2012

INMM Physical Protection Technical Working Group Workshops

International Nuclear Information System (INIS)

Williams, J.D.

1982-01-01

The Institute of Nuclear Materials Management (INMM) established the Physical Protection Technical Working Group to be a focal point for INMM activities related to the physical protection of nuclear materials and facilities. The Technical Working Group has sponsored workshops with major emphasis on intrusion detection systems, entry control systems, and security personnel training. The format for these workshops has consisted of a series of small informal group discussions on specific subject matter which allows direct participation by the attendees and the exchange of ideas, experiences, and insights. This paper will introduce the reader to the activities of the Physical Protection Technical Working Group, to identify the workshops which have been held, and to serve as an introduction to the following three papers of this session

Consideration on the evaluation of the two-man rule for the physical protection of nuclear material and nuclear facilities

International Nuclear Information System (INIS)

Itakura, Shuichiro; Nakagome, Yoshihiro

2008-01-01

The establishment of effective anti-insider measures is a key issue with regard to the physical protection system. The two-man rule, which obligates workers to act always in pairs inside the protected area, is one of the important measures for the anti-insider physical protection system. However, the effectiveness of this method has not been examined in a quantitative manner taking into account the circumstances of Japanese society, which may influence the effectiveness of this method. In this paper, although with several hypotheses, the effectiveness of the two-man rule is confirmed based on the percentage of criminals in the Japanese population. (author)

Physical protection enhancements in Japan and the role of JNES

International Nuclear Information System (INIS)

Nishida, Seishi

2010-01-01

The possibility of terrorist attacks on nuclear material and nuclear facilities has posed a continuing threat since the events of September 11, 2001. The Japanese government has strengthened its physical protection regime, including legislative amendments, due to the necessity of upgrading the degree of protection of nuclear facilities to be equivalent to international levels, in order to cope effectively with the threat of theft of nuclear material and sabotage of nuclear facilities. In relation to these enhancements of the physical protection regime in Japan, the Japan Nuclear Energy Safety Organization (JNES) gives technical support to the regulatory agency, the Nuclear and Industrial Safety Agency (NISA), in the area of physical protection examination and inspection, through the development of technical guides for inspectors and operators, acquisition, analysis, and evaluation of related information, and international cooperation. This support is aimed at ensuring the consistent implementation of physical protection measures in Japan. In the future also, the JNES will provide further support to the NISA aimed at a well-developed physical protection framework in Japan, giving consideration to international physical protection enhancements such as publication of IAEA nuclear security series documents, inter alia Recommendations for physical protection of nuclear material and nuclear facilities being also Revision 5 of INFCIRC 225. (author)

Modernization of physical protection educational laboratories in the National Research Nuclear University MEPhI

Science.gov (United States)

Geraskin, N. I.; Krasnoborodko, A. A.

2017-01-01

Non-proliferation of nuclear materials includes, in addition to accounting and control, the Physical Protection (PP) of one. The paper considers the experience by MEPhI in application the practical educational in the area of PP technical systems. The following aspects are discussed in the paper: specific features graduate program in nuclear security area; overview of the practical course curricula in the special laboratory.

Expert training on physical protection of nuclear materials at universities of Russia

International Nuclear Information System (INIS)

Pogozhin, N.S.; Bondarev, P.V.; Geraskin, N.I.; Kryuchkov, E.F.; Tolstoy, A.I.

2002-01-01

Full text: The expert training on physical protection of nuclear materials in Russia is carry out by the universities on the following directions: 'Physical Protection, Control and Accountability of Nuclear Materials (MPCA)' master educational program. 'Physical and technical problems of atomic engineering' master educational standard. 'Technical Physics' direction. Qualification - master of physics. Duration of training - two years. 'Physical protection of nuclear objects' specialization. 'Nuclear physics and technology' educational standard of a direction for professionally qualified expert training. 'Safety and nonproliferation of nuclear materials' specialty. Qualification - engineer-physician. Duration of training - five years. The Master educational program is intended for the expert training with fundamental knowledge. The masters are assigned to work at the establishments of the Ministry of Atomic Energy of Russia and at the state committee on nuclear supervision (Gosatomnaozor). Many graduates continue their education as post-graduate students. The program is designed for the experts having education of an engineer or a bachelor. The program concept consists in integration in a uniform educational process: profound scientific and technical knowledge; system approach to designing MPCA systems; knowledge of scientific and technical principles, means, devices; MPCA facilities and tools; legal, political and economic aspects of nuclear material management; modern computer and information technologies for MPCA systems; research work and practice of the students. The educational program for 'physical protection of nuclear objects' specialization is intended for the expert training of a practical orientation. Engineer-physicians are assigned as a rule to work at the nuclear objects and are intended for operation and servicing of the certain physical protection systems (PPS). The program concept consists in training not only fundamental aspects of an engineering

Cloud accountability : The likely impact of the proposed EU Data Protection Regulation

NARCIS (Netherlands)

Hon, W.Kuan; Kosta, E.; Millard, Christopher; Stefanatou, D.

2014-01-01

This Working Paper considers the implications for cloud accountability of current proposals under the draft General Data Protection Regulation to modernise the EU Data Protection Directive. It makes recommendations aimed at improving the technology-neutrality of the proposals and their

The international safeguards system and physical protection

International Nuclear Information System (INIS)

Canty, M.J.; Lauppe, W.D.; Richter, B.; Stein, G.

1990-02-01

The report summarizes and explains facts and aspects of the IAEA safeguards performed within the framework of the Non-Proliferation Treaty, and shows perspectives to be discussed by the NPT Review Conferences in 1990 and 1995. The technical background of potential misuse of nuclear materials for military purposes is explained in connection with the physical protection regime of the international safeguards, referring to recent developments for improvement of technical measures for material containment and surveillance. Most attention is given to the peaceful uses of nuclear energy and their surveillance by the IAEA safeguards, including such new technologies and applications as controlled nuclear fusion, laser techniques for uranium enrichment, and particle accelerators. The report's concluding analyses of the current situation show potentials for improvement and desirable or necessary consequences to be drawn for the international safeguards system, also taking into account recent discussions on the parliamentary level. (orig./HP) [de

High school youth and suicide risk: exploring protection afforded through physical activity and sport participation.

Science.gov (United States)

Taliaferro, Lindsay A; Rienzo, Barbara A; Miller, M David; Pigg, R Morgan; Dodd, Virginia J

2008-10-01

Suicide ranks as the third leading cause of death for adolescents. Recent data from the Centers for Disease Control and Prevention (CDC) indicate that the adolescent suicide rate increased 18% between 2003 and 2004. Sport may represent a promising protective factor against adolescent suicide. This study examined the relative risk of hopelessness and suicidality associated with physical activity and sport participation. Data from the CDC's 2005 Youth Risk Behavior Survey were analyzed. Logistic regression modeling was used to compare the odds of hopelessness and suicidality in students who engaged in various levels of physical activity to inactive students. Similar analyses were performed comparing risks of athletes to nonathletes, and the risks of highly involved athletes to nonathletes. Findings showed that frequent, vigorous activity reduced the risk of hopelessness and suicidality among male adolescents. However, low levels of activity actually increased the risk of feeling hopeless among young females. Yet, for both males and females, sport participation protected against hopelessness and suicidality. These findings indicate that involvement in sport confers unique psychosocial benefits that protect adolescents against suicidality. Findings suggest that mechanisms other than physical activity contribute to the protective association between sport and reduced suicidality. Social support and integration may account for some of the differences found in suicidality between athletes and nonathletes.

Advanced physical protection systems for facilities and transportation

International Nuclear Information System (INIS)

Jones, O.E.

1976-01-01

Sandia Laboratories is developing advanced physical protection safeguards in order to improve the security of special nuclear materials, facilities, and transportation. Computer models are being used to assess the cost-effectiveness of alternative systems for protecting facilities against external attack which may include internal assistance, and against internal theft or sabotage. Physical protection elements such as admittance controls, portals and detectors, perimeter and interior intrusion alarms, fixed and remotely activated barriers, and secure communications are being evaluated, adapted, and where required, developed. New facilities safeguards concepts which involve ''control loops'' between physical protection and materials control elements are being evolved jointly between Sandia Laboratories and Los Alamos Scientific Laboratory. Special vehicles and digital communications equipment have been developed for the ERDA safe-secure transportation system. The current status and direction of these activities are surveyed

Advanced physical protection systems for facilities and transportation

International Nuclear Information System (INIS)

Jones, O.E.

1976-01-01

Sandia Laboratories is developing advanced physical protection safeguards in order to improve the security of special nuclear materials, facilities, and transportation. Computer models are being used to assess the cost-effectiveness of alternative systems for protecting facilities against external attack which may include internal assistance, and against internal theft or sabotage. Physical protection elements such as admittance controls, portals and detectors, perimeter and interior intrusion alarms, fixed and remotely-activated barriers, and secure communications are being evaluated, adapted, and where required, developed. New facilities safeguards concepts which involve (control loops) between physical protection and materials control elements are being evolved jointly between Sandia Laboratories and Los Alamos Scientific Laboratory. Special vehicles and digital communications equipment have been developed for the ERDA safe-secure transportation system. The current status and direction of these activities are surveyed

SNAP: a tool for nuclear physical protection system modeling

International Nuclear Information System (INIS)

Engi, D.; Grant, F.H. III.

1979-10-01

Nuclear safeguards systems are concerned, in part, with the physical protection of nuclear materials. The function of a physical protection system is to define the facility against adversary activities which could lead to theft of nuclear material or sabotage resulting in a radiological release. The Safeguards Network Analysis Procedure (SNAP) provides a convenient and standard analysis methodology for the evaluation of physical protection system analysis. This paper describes a detailed application of SNAP to a hypothetical nuclear facility

Proceedings of the Eigth Radiation Physics and Protection Conference (RPC-2006)

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-06-15

The publication's has been set up in 487 papers and also as electronic of the conference of Radiation Physics and Protection, it consists of the following session (1) nuclear physics; (2) neutron physics, shielding and applications; (3) radiation detection and dosimetry; (4) environmental and protection; (5) nuclear physics; (6) radiation effects; (7) medical physics and biophysics; (8) atmospheric dispersion, atomic physics; (9) radiation physics and protection awarded contribution.

Proceedings of the Eigth Radiation Physics and Protection Conference (RPC-2006)

International Nuclear Information System (INIS)

2007-06-01

The publication's has been set up in 487 papers and also as electronic of the conference of Radiation Physics and Protection, it consists of the following session (1) nuclear physics; (2) neutron physics, shielding and applications; (3) radiation detection and dosimetry; (4) environmental and protection; (5) nuclear physics; (6) radiation effects; (7) medical physics and biophysics; (8) atmospheric dispersion, atomic physics; (9) radiation physics and protection awarded contribution

Accountancy, physical control and security: a question of balance

International Nuclear Information System (INIS)

Bishop, D.M.; Wilson, D.W.; Shaver, J.W.

1976-01-01

The historical development of current domestic safeguards regulations is summarized, from the perspective of an operating licensee nuclear fuel facility, in terms of timing, basis and need. Principal aspects of material accounting and physical security as independent approaches to safeguards control are described and analyzed in terms of overlap and effectiveness. Concerns with the licensee safeguards regulatory process are discussed, and development needs are identified. Recommendations are made which contribute to the evolution and improvement of safeguards based on a ''top-down'' systems approach to regulation using proven accounting, physical control and security principles to attain defined objectives

Radiation Protection in Medical Physics : Proceedings of the NATO Advanced Study Institute on Radiation Protection in Medical Physics Activities

CERN Document Server

Lemoigne, Yves

2011-01-01

This book introduces the fundamental aspects of Radiation Protection in Medical Physics and covers three main themes: General Radiation Protection Principles; Radiobiology Principles; Radiation Protection in Hospital Medical Physics. Each of these topics is developed by analysing the underlying physics principles and their implementation, quality and safety aspects, clinical performance and recent advances in the field. Some issues specific to the individual techniques are also treated, e.g. calculation of patient dose as well as that of workers in hospital, optimisation of equipment used, shielding design of radiation facilities, radiation in oncology such as use of brachytherapy in gynecology or interventional procedures. All topics are presented with didactical language and style, making this book an appropriate reference for students and professionals seeking a comprehensive introduction to the field as well as a reliable overview of the most recent developments.

Education in nuclear physics, medical physics and radiation protection in medicine and veterinary medicine

International Nuclear Information System (INIS)

Popovic, D.; Djuric, G.; Andric, S.

2001-01-01

Education in Nuclear Physics, Medical Physics and Radiation Protection in medicine and veterinary medicine studies on Belgrade University is an integral part of the curriculum, incorporated in different courses of graduate and post-graduate studies. During graduate studies students get basic elements of Nuclear Physics through Physics and/or Biophysics courses in the 1 st year, while basic knowledge in Medical Physics and Radiation Protection is implemented in the courses of Radiology, Physical Therapy, Radiation Hygiene, Diagnostic Radiology and Radiation Therapy in the 4 th or 5 th year. Postgraduate studies offer MSc degree in Radiology, Physical Therapy, while courses in Nuclear Physics, Nuclear Instrumentation, Radiation Protection and Radiology are core or optional. On the Faculty of Veterinary Medicine graduated students may continue their professional education and obtain specialization degree in Radiology, Physical Therapy or Radiation Protection. On the Faculty of Medicine there are specialization degrees in Medical Nuclear Physics. Still, a closer analysis reveals a number of problems both from methodological and cognitive point of view. They are related mostly to graduate students ability to apply their knowledge in practise and with the qualifications of the educators, as those engaged in graduate studies lack basic knowledge in biological and medical sciences, while those engaged in post graduate studies mostly lack basic education in physics. Therefore, a reformed curricula resulting from much closer collaboration among educators, universities and professional societies at the national level should be considered. (author)

Proceedings of the Seventh Radiation Physics and Protection Conference (RPC-2004)

International Nuclear Information System (INIS)

2005-04-01

The Conference of radiation physics and protection was held on 27-30 November, 2004 in Egypt. the specialists discussed radiation physics and protection, fundamental radiation physics and application, Natural and man made radiation sources and radiation measurements, radiation protection and environmental, applied radiation physics, physics in medicine and biology were disscused at the conference. More than 800 papers were presented in the conference

Status of U.S. programs for material protection, control ampersand accounting assistance to Ukraine and Kazakstan

International Nuclear Information System (INIS)

Roche, C.T.; Zinneman, T.E.; Rudolph, R.R.

1995-01-01

The United States is one of several donor states providing technical assistance to the Newly Independent States (NIS) of the Former Soviet Union (FSU) for improving their systems for control of nuclear materials. Ukraine and Kazakstan have significant nuclear energy programs. Both countries have committed to nonproliferation of nuclear weapons. They have signed the NPT and have safeguards agreements with the U.S. concerning development of state systems of control, accounting and physical protection of nuclear materials. As directed by the DOE - International Safeguards Division (now the DOE - Russia/NIS Nuclear Materials Security Task Force), technical specialists from several national laboratories, including Argonne, Los Alamos, Oak Ridge, Pacific Northwest and Sandia, as well as representatives of other U.S. Government organizations, such as the NRC, DOD/DNA and the New Brunswick Laboratory, are interacting with government regulatory and facility personnel of Ukraine and Kazakstan. Argonne has program coordination responsibilities for both countries. In support of agreements between the U.S. and Ukraine and the U.S. and Kazakstan, the DOE is responsible for providing technical assistance and training to aid in the evaluation, design, development, and implementation of nuclear material safeguards. This assistance includes: (1) information systems for tracking and reporting the location of nuclear materials, (2) application of nuclear measurement techniques for verifying inventories, (3) material control and accounting (MC ampersand A) systems, and (4) physical protection (PP) systems. Site survey teams, including both MC ampersand A and PP experts from several national labs, have visited Ukraine and Kazakstan. This paper summarizes activities to date and future plans

Abstracts of 20. International Symposium Radiation Protection Physics

International Nuclear Information System (INIS)

1988-01-01

51 papers are presented as titles with abstracts which are processed individually for the INIS data base. They deal with general aspects of radiation protection physics, international activities in radiation protection, solid state dosimetry, models and calculation methods in radiation protection, and measuring techniques in radiation protection

Modernization of the physical protection system of IPEN-CNEN/SP

International Nuclear Information System (INIS)

Suzuki, F.F.

2001-01-01

Full text: The plans of physical protection of nuclear facilities must be reviewed and updated every two years. A general study of the physical protection system was carried out in order to review and to update the plan of physical protection of IPEN-CNEN/SP. Important alterations accomplished at the institute were considered in the study, as the installation of a cyclotron 30 MeV and the new operation conditions for the nuclear research reactor IEA-RI, that include the increase of its operation power from two to five megawatts and the establishment of the continuous operation by 72 hours weekly. The area of IPEN-CNEN/SP is 478,000 m 2 (101,850 m 2 built area of 107 constructions). The group responsible for the study investigated the performance of the physical protection system and detected some points that could be reinforced at inner and protected areas. The initial step was the evaluation, in loco, of the constructions and physical barriers of inner and protected areas. The performance of the security force personnel on the conventional procedures, as access control to the facilities, control of material flow, area monitoring and patrol, as well as its response for special situation procedures in the case of a physical protection emergency, were evaluated too. The study also focused the communication means used by the security force, as the extension phone lines that are located in each entrance area and in the huts, and the portable VHP radios that are used by the guards. In order to elaborate a programme of modernization of the physical protection system, using the results of the study as basis, an internal committee composed of specialists in physical protection, nuclear safety, operation of reactors and engineering areas was created. The programme elaborated by the committee strengthens the physical protection system by applying the defense in depth concept. At the same time, it attempts to propitiate a balanced protection to minimize the consequences for

The Physical Protection of Nuclear Material and Nuclear Facilities

International Nuclear Information System (INIS)

1999-08-01

Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international co-operation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and nuclear materials, particularly when such materials are transported across national frontiers

The Physical Protection of Nuclear Material and Nuclear Facilities

International Nuclear Information System (INIS)

1999-06-01

Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international co-operation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and nuclear materials, particularly when such materials are transported across national frontiers [es

The Physical Protection of Nuclear Material and Nuclear Facilities

International Nuclear Information System (INIS)

1999-06-01

Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international co-operation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and nuclear materials, particularly when such materials are transported across national frontiers

Design and evaluation of physical protection systems of nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

An, Jin Soo; Lee, Hyun Chul; Hwang, In Koo; Kwack, Eun Ho; Choi, Yung Myung

2001-06-01

Nuclear material and safety equipment of nuclear facilities are required to be protected against any kind of theft or sabotage. Physical protection is one of the measures to prevent such illegally potential threats for public security. It should cover all the cases of use, storage, and transportation of nuclear material. A physical protection system of a facility consists of exterior intrusion sensors, interior intrusion sensors, an alarm assessment and communication system, entry control systems, access delay equipment, etc. The design of an effective physical protection system requires a comprehensive approach in which the designers define the objective of the system, establish an initial design, and evaluate the proposed design. The evaluation results are used to determine whether or not the initial design should be modified and improved. Some modelling techniques are commonly used to analyse and evaluate the performance of a physical protection system. Korea Atomic Energy Research Institute(KAERI) has developed a prototype of software as a part of a full computer model for effectiveness evaluation for physical protection systems. The input data elements for the prototype, contain the type of adversary, tactics, protection equipment, and the attributes of each protection component. This report contains the functional and structural requirements defined in the development of the evaluation computer model.

U.S. and Russian cooperative efforts to enhance nuclear material protection, control, and accountability at the Siberian Chemical Combine at Tomsk-7

International Nuclear Information System (INIS)

Kreykes, J.; Petrushev, V.I.; Griggs, J.

1996-01-01

The US partners in the Laboratory-to-Laboratory Program in Nuclear Materials Protection, Control, and Accountability (MPC and A) have reached signed agreements with the Siberian Chemical Combine (SKhK) to rapidly enhance the protection, control, and accountability of nuclear material at all of its facilities. SKhK is the largest multi-function production center of the Russian nuclear complex and, until recently, its facilities produced and processed special nuclear materials for the Russian Defense Ministry. SKhK produces heat and electricity, enriches uranium for commercial reactor fuel, reprocesses irradiated fuel, and converts highly enriched uranium metal into oxide for blending into low-enriched reactor-grade uranium, and manufactures civilian products. SKhK is aggressively pursuing a program to enhance MPC and A which includes the installation of pedestrian and vehicle radiation monitors, rapid inventory methods, tamper-indicating devices, computerized accounting systems, and physical protection measures. This work is a collaboration between technical experts from Brookhaven, Lawrence Livermore, Los Alamos, Oak Ridge, pacific Northwest, and Sandia National Laboratories and their Russian counterparts at SKhK. This paper reviews the status of this initial effort and outlines plans for continuing the work in 1996

Software piracy: Physical and legal protection methods

Energy Technology Data Exchange (ETDEWEB)

Orlandi, E

1991-02-01

Advantages and disadvantages, in terms of reliability and cost, are assessed for different physical and legal methods of protection of computer software, e.g., encryption and key management. The paper notes, however, that no protection system is 100% safe; the best approach is to implement a sufficient amount of protection such as to make piracy uneconomical relative to the risks involved.

Data protection for the digital age: comprehensive effects of the evolving law of accountability

Directory of Open Access Journals (Sweden)

Nina GUMZEJ

2012-12-01

Full Text Available The law of personal data protection has for years been lagging behind technology, which is evolving propulsively and with high speed. A number of new challenges arising from the post-modern digital age have been identified for rights and freedoms of individuals with respect to processing of their personal data and thus a need for adapting the relevant legal-regulatory regime and ensuring a workable and systematic data protection system for the third millennium. After examination of the current legal framework and supporting systems at the level of European Union law, this paper focuses on recently proposed reforms. Proposed new EU legal-regulatory regime towards a potent data protection ecosystem is strongly supported by stricter accountability of those who are responsible for personal data. As one of the core legal principles supporting the new regime, accountability denotes, in a nutshell, a number of legally enforceable duties to implement and verify measures and procedures that can ensure operative and demonstrable data protection compliance. Selected highlights of the proposed accountability measures are therefore examined in this paper and arguments provided for a shift towards organizational data protection management and governance already today.

The role of investor protection in corporate governance and accounting harmonization: Cross-country analysis in Asia

Directory of Open Access Journals (Sweden)

Ratna Wardhani

2015-08-01

Full Text Available The purpose of this research is to analyze the effect of law system for investor protection on implementation of corporate governance at company level and degree of convergence of local accounting standards to IFRS (International Financial Reporting Standards. The result shows that investor protection has positive effect on implementation of corporate governance and degree of convergence of local standard to IFRS. The evidence is consistent with the argument that firm can establish law environment well for their own, but the quality of corporate investor protection via implementation of corporate governance mechanisms will depend on efficiency of judicial system of the country where the firm operates; and the quality of accounting standard in one country is a signal of country’s commitment to investor protection in order to provide good protection for its investor; a country will tend to adopt higher quality of accounting standard to ensure financial reporting transparency. This indicates that investor protection can be the key to the quality of other governance mechanisms, both at institutional level such as accounting standards, and also at firm level such as corporate governance implementation.

About role of human factors in the building of physical protection system

International Nuclear Information System (INIS)

Ivanov, P.

2002-01-01

Full text: A special role in establishing the physical protection system (at all levels) pertains to the human factor. It is necessary to specify a place of this matter within the overall security system. The nuclear energy sector security (as well as of other national industry sectors) is based on the people: developers, personnel, different level management responsible for decision-making process, the representative of regulatory, controlling and legal structures, and therefore, in general, the rote of the human factor can be considered to be significant. The operative situation while being formed during the physical protection ensuring, first of all, is affected by the following factors: political, social and economic, spiritual wealth and cultural factors and etc. In addition, a new problem suddenly appeared related to the safety and security of the energy complex, that is: uncontrolled processes such as: non-payment, debts on salary for several month period; all this factors effect negatively the level of safety and security. In this clear, that in such a difficult situation the role of an individual is increasing. Ignorance of the above factors or their non-objective (incomplete, partial ignorance) accounting (consideration) finally can lead to the negative and irremediable consequences. Thus, the content and the extent of the security of a society, in general, and every person, in particular, directly depend on the functioning of all society's structure, and, first of all, on the economic, social, political and legal structures. As a result, the physical protection system acquires a complex or comprehensive structure and I shall describe its specifics in the paper. (author)

Establishing an Information Security System related to Physical Protection

International Nuclear Information System (INIS)

Jang, Sung Soon; Yoo, Ho Sik

2009-01-01

A physical protection system (PPS) integrates people, procedures and equipment for the protection of assets or facilities against theft, sabotage or other malevolent attacks. In the physical protection field, it is important the maintain confidentiality of PPS related information, such as the alarm system layout, detailed maps of buildings, and guard schedules. In this abstract, we suggest establishing a methodology for an information security system. The first step in this methodology is to determine the information to protect and possible adversaries. Next, system designers should draw all possible paths to the information and arrange appropriate protection elements. Finally he/she should analyze and upgrade their information security system

The physical protection of nuclear material

International Nuclear Information System (INIS)

1993-09-01

Technical Committee met 21-25 June 1993 to consider changes to INFCIRC/225/Rev.2. The revised document, INFCIRC/225/Rev.3, reflects the Technical Committee recommendations for changes to the text as well as other modifications determined necessary to advance the consistency of the Categorization Table in INFCIRC/225/Rev.2 with the categorization table contained in The Convention of the Physical Protection of Nuclear Material and to reflect additional improvements presented by the experts. The recommendations presented in this IAEA document reflect a broad consensus among Member States on the requirements which should be met by systems for the physical protection of nuclear materials and facilities. It is hoped that they will provide helpful guidance for Member States

The physical protection of nuclear material

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

Technical Committee met 21-25 June 1993 to consider changes to INFCIRC/225/Rev.2. The revised document, INFCIRC/225/Rev.3, reflects the Technical Committee recommendations for changes to the text as well as other modifications determined necessary to advance the consistency of the Categorization Table in INFCIRC/225/Rev.2 with the categorization table contained in The Convention of the Physical Protection of Nuclear Material and to reflect additional improvements presented by the experts. The recommendations presented in this IAEA document reflect a broad consensus among Member States on the requirements which should be met by systems for the physical protection of nuclear materials and facilities. It is hoped that they will provide helpful guidance for Member States.

IPPAS guidelines. Reference document for the IAEA International Physical Protection Advisory Service

International Nuclear Information System (INIS)

1999-01-01

The IAEA International Physical protection Advisory Service (IPPAS) provides advice to Member States to assist them in strengthening the effectiveness of their national physical protection system whilst recognizing the ultimate responsibility for physical protection is that of the Member State. The IPPAS is available to all countries with nuclear materials and facilities. The basic concepts, purposes and functions of physical protection are provided in INFCIR/225, 'The Physical Protection of Nuclear Material and Nuclear Facilities' as amended from time to time and 'the Convention on the Physical Protection of Nuclear Material (INFCIR/247/Rev.1). The guidance given in INFCIR/225 recognizes that implementation of these requirements vary from country to country depending on their existing constitutional, legal and administrative systems; the assessment of the threat for the potential theft of nuclear material or sabotage of nuclear facilities; the technical skills and professional and financial resources available to the competent authority; and social customs and cultural traditions. IPPAS missions are performance oriented in that they accept different approaches to the implementation of national physical protection system

Material Protection, Accounting, and Control Technologies (MPACT): Modeling and Simulation Roadmap

Energy Technology Data Exchange (ETDEWEB)

Cipiti, Benjamin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dunn, Timothy [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Durbin, Samual [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Durkee, Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); England, Jeff [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Jones, Robert [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Ketusky, Edward [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Li, Shelly [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lindgren, Eric [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Meier, David [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Miller, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Rauch, Eric Benton [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Scaglione, John [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Scherer, Carolynn P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sprinkle, James K. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-08-05

The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal. This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling. To aid in framing its long-term goal, during FY16, a modeling and simulation roadmap is being developed for three major areas of investigation: (1) radiation transport and sensors, (2) process and chemical models, and (3) shock physics and assessments. For each area, current modeling approaches are described, and gaps and needs are identified.

The convention on the physical protection of nuclear material

International Nuclear Information System (INIS)

1980-05-01

This document contains the full text of a convention to facilitate the safe transfer of nuclear material, and to insure the physical protection of nuclear material in domestic use, storage, and transport. Two annexes are included, which establish categories of nuclear materials and levels of physical protection to be applied in international transport

Progress and cooperation. Y2K, safeguards and physical protection

International Nuclear Information System (INIS)

Chitumbo, K.; Hilliard, J.; Smith, J.

1999-01-01

The Year 2000 problem poses major technical challenges to computer systems. For that reason it has drawn considerable attention over the past four years at the IAEA and within the international safeguards community of States and organisations. Actions of IAEA are very close to completion for the conversion of al related systems to make them Y2K compliant. As a result of IAEA past work and continuing liaison with Member States, the following needs were identified: organizing assistance and/or training to help states evaluate existing accounting software, and upgrade it or develop new Y2K compliant software; providing Y2K compliant software when needed; providing guidance and assistance on physical protection issues; organizing assistance missions visiting a state encountering problems; establishing contingency plans

US/Russian cooperative efforts in nuclear material protection, control, and accounting at the Siberian Chemical Combine

International Nuclear Information System (INIS)

Goloskokov, I.; Yarygin, A.; Petrushev, V.; Morgado, R.E.

1998-01-01

The Siberian Chemical Combine (SKhK) is the largest multifunction nuclear production facility in the Russian nuclear complex. Until recently, it produced and processed special nuclear material for the Russian Defense Ministry. SKhK and its US partners in the Department of Energy (DOE) US/Russian Materials Protection, Control, and Accountability (MPC and A) Program are nearing completion of the initial MPC and A upgrades at the six SKhK plant sites that were begun three years ago. Comprehensive enhancements to the physical protection and access control systems are progressing on a site-wide basis while a comprehensive MC and A system is being implemented at the Radiochemical Plant site. SKhK now produces thermal and electrical power, enriches uranium for commercial reactor fuel, reprocesses irradiated fuel, converts high-enriched uranium metal into high-enriched oxide for blending into reactor-grade, low-enriched uranium, and manufactures civilian products. The authors review the progress to date and outline plans for continuing the work in 1999

Physical protection philosophy and techniques in Sweden

International Nuclear Information System (INIS)

Dufva, B.

1988-01-01

The circumstances for the protection of nuclear power plants are special in Sweden. A very important factor is that armed guards at the facilities are alien to the Swedish society. They do not use them. The Swedish concept of physical protection accepts that the aggressor will get into the facility. With this in mind, the Swedish Nuclear Power Inspectorate (SKI) has established the policy that administrative, technical, and organizational measures will be directed toward preventing an aggressor from damaging the reactor, even if he has occupied the facility. In addition, the best conditions possible shall be established for the operator and the police to reoccupy the plant. The author believes this policy is different from that of many other countries. Therefore, he focusses on the Swedish philosophy and techniques for the physical protection of nuclear power plants

Physical protection system design and evaluation

International Nuclear Information System (INIS)

Williams, J.D.

1997-11-01

The design of an effective physical protection system (PPS) includes the determination of the PPS objectives, the initial design of a PPS, the evaluation of the design, and probably, the redesign or refinement of the system. To develop the objectives, the designer must begin by gathering information about facility operation and conditions, such as a comprehensive description of the facility, operating conditions, and the physical protection requirements. The designer then needs to define the threat. This involves considering factors about potential adversaries: class of adversary, adversary's capabilities, and range of adversary's tactics. Next, the designer should identify targets. Determination of whether or not the materials being protected are attractive targets is based mainly on the ease or difficulty of acquisition and desirability of the material. The designer now knows the objectives of the PPS, that is, ''what to protect against whom.'' The next step is to design the system by determining how best to combine such elements as fences, vaults, sensors and assessment devices, entry control devices, communication devices, procedures, and protective force personnel to meet the objectives of the system. Once a PPS is designed, it must be analyzed and evaluated to ensure it meets the PPS objectives. Evaluation must allow for features working together to ensure protection rather than regarding each feature separately. Due to the complexity of the protection systems, an evaluation usually requires modeling techniques. If any vulnerabilities are found, the initial system must be redesigned to correct the vulnerabilities and a reevaluation conducted. After the system is installed, the threat and system parameters may change with time. If they do, the analysis must be performed periodically to ensure the system objectives are still being met

Experience gained with certification of instruments for the system for nuclear material physical protection, accounting, and control

International Nuclear Information System (INIS)

Gus'kov, O.M.; Egorov, V.V.; Morozov, O.S.; Novikov, V.M.

1999-01-01

Results of the tests have confirmed the expedience of certification of the equipment, especially imported items. For the use of imported equipment at Russian facilities, it is justified to accommodate the accompanying documents thereto for the Russian standards. Equipment items shipped to Russia should be prepared for the certification tests and/or operation. When taking decision on the certification of imported equipment, it is expedient to preliminarily estimate the instrument's parameters and its operation in Russia. To solve the question whether the imported equipment is usable for Russia and what engineering support and maintenance is needed for its operation, it would be justified to create the Center for engineering support of instruments to be used for nuclear material protection, control and accounting on the basis of one of institutes dealing with the development of instruments for these application [ru

Abstracts of 21. International Symposium Radiation Protection Physics

International Nuclear Information System (INIS)

1989-01-01

45 papers are presented as titles with abstracts which are processed individually for the INIS data base. They deal with general aspects of radiation protection physics, chiefly problems of radiation detection and measuring techniques in radiation protection

Physical protection of nuclear power plants-technical and legal aspects

International Nuclear Information System (INIS)

Castro Martins, O.J. de.

1978-04-01

The nuclear power plants are defined according to the definitions included in the Brazilian legislation and international conventions and their physical protection is analysed. Besides, the differences and the relations among nuclear security, safeguards and physical protection are established. (A.L.) [pt

National Radiological Protection Board. Account 1991-92

International Nuclear Information System (INIS)

1992-01-01

The Board was constituted as a public authority under the Radiological Protection Act 1970 with the functions of advancing the acquisition of knowledge about the protection of mankind from radiation hazards and providing information and advice to persons, including Government Departments, with responsibilities in the United Kingdom in relation to the protection from radiation hazards either of the community as a whole or particular sections of the community. The Board is also empowered to provide technical services to persons and groups of persons concerned with radiation hazards on a commercial basis. These accounts show that the surplus on ordinary activities amounted to 210k pounds; cash balances increased by 161k pounds to 748k pounds which includes 431k pounds held on behalf of European Partners under the CEC Association Agreement. The Board achieved the principal objectives which had been set out in the Corporate Plan. Demand for the provision of services and advice to industry and other public bodies continued at a constant level. Current major issues are the new Recommendations from the International Commission on Radiological Protection for control of exposure, and subsequent national recommendations on dose limitation; an increasing awareness of non-ionising radiation, and public exposures and aspects of radiation in the environment. In particular there has been a significant demand for radon surveys as part of a sponsored monitoring programme in the south-west which is largely responsible for the increase in income-earning activities. Further studies are being commissioned and it is likely, therefore, that the Board will continue to be involved in large-scale radon work in the immediate future. The financial objectives were attained with minor variances on the planned budget profiles. (UK)

Franco-German cooperation for the physical protection of the EPR reactor

International Nuclear Information System (INIS)

Jalouneix, J.; Hagemann, A.

2001-01-01

This article presents the proceeding that has been followed in the EPR (European pressurized water reactor) project concerning physical protection against malevolent actions and robbery of nuclear materials. Before the different options of the nuclear island were definitely set, a task group had been constituted to examine if these options could hamper the setting of physical protection measures that are required by the legislation of the 2 countries. Another group composed of experts from IPSN/GRS (Institut de Protection et de Surete Nucleaire / Gesellschaft fur Anlagen und Reaktorsicherheit) had the task to define common requirements concerning the physical protection of reactors in Germany and in France. In this framework the EPR project team has prepared a technical document reviewing the different dispositions that have been retained to assure the physical protection of the reactor. (A.C.)

Impact of Y2K problem on physical protection system

International Nuclear Information System (INIS)

Kumar, R.; Swadia, N.S.; Zanwar, P.S.; Mishra, G.P.; Salunke, A.S.; Nigam, R.K.

1999-01-01

Year 2000 related system failures/problems in Physical Protection System pose no threat to general safety and functioning of any nuclear facility. But there can be potential security threats having radiation safety and non-proliferation concern and hence should be given due importance. Reviewing and testing Physical Protection System for Y2K compliance are easier than other systems as it does not directly affect operation of the plant. The existing emergency response capability at the nuclear facilities should be utilizes effectively to mitigate any Y2K induced events on Physical Protection System with dedicated manpower and channeled efforts

Physical Protection System Design Analysis against Insider Threat based on Game Theoretic Modeling

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyo-Nam; Suh, Young-A; Yim, Man-Sung [KAIST, Daejeon (Korea, Republic of); Schneider, Erich [The University of Texas, Austin (United States)

2015-05-15

This study explores the use of game-theoretic modeling of physical protection analysis by incorporating the implications of an insider threat. The defender-adversary interaction along with the inclusion of an insider is demonstrated using a simplified test case problem at an experimental fast reactor system. Non-detection probability and travel time are used as a baseline of physical protection parameters in this model. As one of the key features of the model is its ability to choose among security upgrades given the constraints of a budget, the study also performed cost benefit analysis for security upgrades options. In this study, we analyzed the expected adversarial path and security upgrades with a limited budget with insider threat modeled as increasing the non-detection probability. Our test case problem categorized three types of adversary paths assisted by the insider and derived the largest insider threat in terms of the budget for security upgrades. More work needs to be done to incorporate complex dimensions of insider threats, which include but are not limited to: a more realistic mapping of insider threat, accounting for information asymmetry between the adversary, insider, and defenders, and assignment of more pragmatic parameter values.

Physical Protection System Design Analysis against Insider Threat based on Game Theoretic Modeling

International Nuclear Information System (INIS)

Kim, Kyo-Nam; Suh, Young-A; Yim, Man-Sung; Schneider, Erich

2015-01-01

This study explores the use of game-theoretic modeling of physical protection analysis by incorporating the implications of an insider threat. The defender-adversary interaction along with the inclusion of an insider is demonstrated using a simplified test case problem at an experimental fast reactor system. Non-detection probability and travel time are used as a baseline of physical protection parameters in this model. As one of the key features of the model is its ability to choose among security upgrades given the constraints of a budget, the study also performed cost benefit analysis for security upgrades options. In this study, we analyzed the expected adversarial path and security upgrades with a limited budget with insider threat modeled as increasing the non-detection probability. Our test case problem categorized three types of adversary paths assisted by the insider and derived the largest insider threat in terms of the budget for security upgrades. More work needs to be done to incorporate complex dimensions of insider threats, which include but are not limited to: a more realistic mapping of insider threat, accounting for information asymmetry between the adversary, insider, and defenders, and assignment of more pragmatic parameter values

Parents' experiences of participation in physical activities for children with cerebral palsy - protecting and pushing towards independence.

Science.gov (United States)

Lauruschkus, Katarina; Nordmark, Eva; Hallström, Inger

2017-04-01

To explore how parents of children with cerebral palsy (CP) experience their child's participation in physical activities and to identify facilitators and barriers for being physically active and reducing sedentary behaviour. Twenty-five parents of sixteen children, aged 8-11 years old with CP, with varying gross motor, cognitive and communicative functions and with different cultural backgrounds, participated in focus group or individual interviews. Content analysis was used for analysis. Five subcategories addressing children's participation in physical activity were found: "Belonging and taking space in the family", "Important persons facilitating and hindering", "Friends important but hard to get", "Good for the body but challenging" and "Availability and opting out possibilities". The subcategories built the main category "Protecting and pushing towards independence", expressing the challenges parents experienced when their child wanted to be physically active. Parents desire competent persons to be available for support in participation in physical activities. They want support in finding friends for their child to be physically active with. Family culture and attitudes affect their child's motivation for being physically active and should be taken into account when designing interventions for increased participation in physical activities and for reduced sedentary behaviour in children with disabilities. Implications for Rehabilitation Friends and competent adults facilitate participation in physical activities and reduce sedentary behaviour. Information on accessible and tailored physical activities is an important facilitator for participation in physical activities. Service planning and design of interventions may be facilitated by taking the individual family culture into account.

Physical protection as the most important part of the national system of combating illicit trafficking

International Nuclear Information System (INIS)

Mishchenko, V.

2002-01-01

Full text: It is now obvious today that illicit trafficking, including its most dangerous manifestations proliferation of nuclear weapons, smuggling of nuclear materials and equipment - present a serious threat to the international community. To defeat this evil is possible only by joint efforts, by undertaken protective measures on national and international level. Joint efforts should be directed at fulfilling three main tasks as follows: safe and reliable handling of nuclear material, effective measures of its physical protection, accountancy and control in order to prevent proliferation; joint activities of intelligence customs and law-enforcement authorities directed at prevention of international trafficking and marketing of stolen goods; joint activities directed at identification and prevention of illegal supply and demand of fissionable materials counteracting thereby various criminal structures. In order to solve these problems an international regime should be established. Such regime will define a number of criteria and demands to be met by-the states to ensure effective combat illicit trafficking. The international regime should be based on national systems of combating illicit trafficking, which include measures for prevention, detection and response regarding illicit trafficking in each specific state of across its borders. When undertaking these measures one should take into account specific characteristics of the state, its unique features and its geography, political and economic situation, as well as different types of potential threat of proliferation of nuclear weapons; availability of materials subjected to illicit trafficking in this state, general situation of criminal trafficking in this state, general situation of criminal trafficking with radioactive materials, potential consumers and suppliers, market features, possible incentives for crime etc. In the paper I would like to reflect the vital components of national systems for combating

Safeguards and physical protection - The Belarus experience

International Nuclear Information System (INIS)

Krevsun, E.

1999-01-01

Taking into account the new initiatives of the IAEA Belarus indented to continue activity on improving the Material Protection, Control and Accounting system in various directions. The significant ones are: electronic transmission of information to the IAEA, measurement standards of nuclear materials, upgraded Wiegard cards with photographs of their holders, preventive measures (threat, evaluation of safety for objects, sabotage from the staff etc.). The Belarus experience testifies that there is a unique way for increasing nuclear and radiation safety: cooperation and exchange of experience on a global scale

Accountability as a Way Forward for Privacy Protection in the Cloud

Science.gov (United States)

Pearson, Siani; Charlesworth, Andrew

The issue of how to provide appropriate privacy protection for cloud computing is important, and as yet unresolved. In this paper we propose an approach in which procedural and technical solutions are co-designed to demonstrate accountability as a path forward to resolving jurisdictional privacy and security risks within the cloud.

Quantitative evaluation of physical protection system in nuclear power plant

International Nuclear Information System (INIS)

Sun Yahua; Li Bin; Li Shiju

2009-01-01

Based on the prompt detection analysis, this paper introduced one analysis model of intrusion path in nuclear power plant by means of morphology analysis and developed the evaluation software for path model analysis of physical protection system. Quantitative analysis on three elements (detection, delay, and response) of physical protection system was presented with an imaginary intrusion event example in Mac Arthur nuclear center. The results indicated that the path prompt detection analysis worked effectively to find the weak point of the physical protection system in NPP, and meantime we can also get the high cost-effectiveness improved measures. It is an effective approach to evaluate the overall performance of the system. (authors)

Safeguarding on-line accountability data

International Nuclear Information System (INIS)

Carlson, R.L.

1980-06-01

HEDL is developing a computerized accountability system that addresses the concerns of data access and data protection. The system utilizes a distributed processing network with transaction oriented software. Microprocessor controlled data accumulation stations are utilized which permit data editing to reduce errors, while maintaining several levels of backup protection. Software changes are allowed only after thorough review, protected by passwording, and are overchecked by audit. Protection against misuse by unauthorized individuals utilizes extensive physical security of the computer and the remote terminals. The positive identification devices and strict software control ensure that individuals cannot subvert the system without leaving an audit trail of their actions. This serves as a deterrent against malevolent acts by the authorized user

Physical protection and its role in nuclear non-proliferation

International Nuclear Information System (INIS)

Nilsson, A.

1999-01-01

Non-proliferation of nuclear weapons has been one of the main concerns of the international community since the first nuclear weapons were developed. To prevent the proliferation of nuclear weapons has been on the agenda for individual States, groups of States and the international organizations. A number of treaties, conventions and agreements, the most important being the Non-Proliferation Treaty, have been negotiated to prevent the horizontal proliferation of nuclear weapons. States have concluded safeguards agreements with the IAEA to fulfill their obligations according to Article III.1 of the NPT. Other agreements relate to the prevention of vertical proliferation and also to the disarmament of nuclear weapons. It has also been recognized that sub-national, terrorist, or criminal activities may pose a proliferation risk. Illicit trafficking of nuclear material, particularly highly enriched uranium or plutonium, is a non-proliferation concern. States have recognized the need to prevent, as far as possible, the use of nuclear material in unlawful activities. The Convention of Physical Protection of Nuclear Materials, obligates the State Parties to protect nuclear material from theft during international transport, and to make unlawful possession, use, etc., of nuclear material a criminal offense, subject to punishment under national law. Although the physical protection convention recognizes the importance of the physical protection of nuclear material in domestic use, storage and transport, it does not obligate the State party to establish the necessary systems for this purpose. It is this limitation which led many States to believe that the international physical protection regime needs to be strengthened. Although not legally binding per se, the recommendations documented in INFCIRC/225/Rev. 4, The Physical Protection of Nuclear Material and Nuclear Facilities, has obtained wide recognition. There is recognition among States that protecting nuclear material

Implementation of U.S. Department of Energy physical protection upgrades in Lithuania and Uzbekistan

International Nuclear Information System (INIS)

Haase, M.; Romesberg, L.; Showalter, R.; Soo Hoo, M.S.; Corey, J.; Engling, E.

1996-01-01

Since 1994, the U.S. Department of Energy (DOE) has provided cooperative assistance to the non-nuclear weapons states of the Former Soviet Union. This effort, within DOE's program of Material Protection, Control, and Accounting (MPC ampersand A), identified the Institute of Nuclear Physics (INP) in Uzbekistan and the Ignalina Nuclear Power Plant (INPP) in Lithuania as sites for cooperative MPC ampersand A projects. The INP, located just outside of Tashkent, is the site of a 10-megawatt WWR-SM research reactor. This reactor is expected to remain operational as a major nuclear research and isotope production reactor for Central Asia. The INPP, located 100 kilometers northeast of the capital city of Vilnius, consists of two Russian-made RBMK reactors with a combined power output of 3,000 megawatts (electric). This power plant has been the subject of international safety and security concerns, which prompted DOE's cooperative assistance effort. This paper describes U.S. progress in a multi-national effort directed at implementing physical protection upgrades in Lithuania and Uzbekistan. The upgrades agreed upon between DOE and the INP and between DOE and the INPP have been designed to interface with upgrades being implemented by other donor countries. DOE/INPP upgrade projects include providing training on U.S. approaches to physical protection, access control through the main vehicle portal, a hardened central alarm station, and improved guard force communications. DOE/INP upgrade projects in Uzbekistan include an access control system, a hardened fresh fuel storage vault, an interior intrusion detection and assessment system, and an integrated alarm display and assessment system

U.S. Department of Energy physical protection upgrades at the Latvian Academy of Sciences Nuclear Research Center, Latvia

International Nuclear Information System (INIS)

Haase, M.; Hine, C.; Robertson, C.

1996-01-01

Approximately five years ago, the Safe, Secure Dismantlement program was started between the US and countries of the Former Soviet Union (FSU). The purpose of the program is to accelerate progress toward reducing the risk of nuclear weapons proliferation, including such threats as theft, diversion, and unauthorized possession of nuclear materials. This would be accomplished by strengthening the material protection, control, and accounting systems within the FSU countries. Under the US Department of Energy''s program of providing cooperative assistance to the FSU countries in the areas of Material Protection, Control, and Accounting (MPC and A), the Latvian Academy of Sciences Nuclear Research Center (LNRC) near Riga, Latvia, was identified as a candidate site for a cooperative MPC and A project. The LNRC is the site of a 5-megawatt IRT-C pool-type research reactor. This paper describes: the process involved, from initial contracting to project completion, for the physical protection upgrades now in place at the LNRC; the intervening activities; and a brief overview of the technical aspects of the upgrades

The main findings of the third Russian international conference on nuclear material protection, control and accounting, Obninsk, RF, 16-20 May, 2005

International Nuclear Information System (INIS)

Kondratov, S.

2005-01-01

Full text: The first and the second Russian international conferences on MPC+A held in 1997 and 2000 correspondingly, under the Russian-American program of the MPC+A cooperation proved to be a useful tool for Russian, American specialists and experts from a number for sharing their opinions and exchanging achievements in this sensitive area. The recommendation to hold the next third MPC+A conference in Russia was formulated in the final document of the second conference in 2000. The results of the Russian-American cooperation are especially valuable since they demonstrate how much can be done due to the joint efforts of even previously adversarial countries. This paper gives a summary of the main findings of the third Russian conference on the MPC+A with a specific emphasis on physical protection of the Russian nuclear materials and nuclear facilities. Besides the physical protection, materials accounting, education and training of personnel, security culture and some other associated topics of the conference are also addressed. (author)

Material control and accountability in nuclear fuel cycle

International Nuclear Information System (INIS)

Rumyantsev, A.N.

2006-01-01

It is proposed to unify the complexes, used in the systems for control and accountability of nuclear materials, and to use the successful experience of developing these complexes. It is shown that the problem of control, accountability and physical protection may by achieved by using the developed complex Probabilistic expert-advising system, permitting to analyse the safety in nuclear fuel cycles [ru

Convention on the Physical Protection of Nuclear Material

International Nuclear Information System (INIS)

1980-01-01

The convention on the Physical Protection of Nuclear Material is composed of the text of 23 articles, annex 1 showing the levels of physical protection and annex 2 which is the categorization list of nuclear material. The text consists of definitions (article 1), the scope of applications (2), liability of protecting nuclear material during international transport (3 and 4), duty of mutual cooperation (5 and 6), responsibility for criminal punishment (7 to 13), and final provisions (14 to 23). It is to be noted that the nuclear material for military purposes and domestic nuclear facilities are excluded in the connection. After the brief description of the course leading to the establishment of the convention, individual articles and annexes and the respective Japanese version, and the explanation based on the intergovernmental meeting discussion on the draft convention are described. (J.P.N.)

Determining Which Introductory Physics Topics Pre-Service Physics Teachers Have Difficulty Understanding and What Accounts for These Difficulties

Science.gov (United States)

Sahin, Esin; Yagbasan, Rahmi

2012-01-01

This study aims at diagnosing which subjects pre-service physics teachers have difficulty understanding in introductory physics courses and what accounts for these difficulties. A questionnaire consisting of two qualitative questions was used to collect data for this study. The questionnaire was administered to 101 pre-service physics teachers who…

Diet discussion begins for signing convention on physical protection

International Nuclear Information System (INIS)

Anon.

1988-01-01

As a part of the amendment of the domestic laws required for signing the 'Convention on the Physical Protection of Nuclear Materials', the government placed the bill for the partial amendment of the 'Law for the Regulations of Nuclear Source Materials, Nuclear Fuel Materials and Reactors' to the current session of the Diet, following the formal approval by the Cabinet on March 11. This bill provides for punishment in the case of endangering or threat related to the handling and use of nuclear materials. The Atomic Energy Commission proposed in December, last year the early signing of the Convention and the legislation on the antiterrorism and physical protection measures required for the signing. The amendment consists mainly of two parts: one stipulates the obligation for those who manage the handling of nuclear materials to take the proper measures for their physical protection, and the other stipulates the punishment of the crimes related to nuclear materials. Regarding the other amendment of the relevant domestic laws, the Criminal Law was partially amended in June, last year. The Aviation Act and the Ships Safety Act, both related to the transport of nuclear materials, will not be amended, but only the relevant Ministerial Ordinances will be revised. The Convention on the Physical Protection of Nuclear Materials came into force in February, 1987, and consists of 23 articles. (Kako, I.)

PROTECTION OF HOUSEHOLD APPLIANCES INDUCTION MOTORS AGAINST OVERCURRENT TAKING INTO ACCOUNT NONLINEAR DISTORTION OF PHASE CURRENT

Directory of Open Access Journals (Sweden)

A.G. Sereda

2015-06-01

Full Text Available Purpose. Theoretical justification and engineering of induction motors heat protection method from overload currents taking into account nonlinear distortion of the phase current and implementation as a microprocessor device functioning algorithm. Methodology. To solve the problem used the theory of the representing complex harmonic oscillations analog signals expansion into the oscillation spectrum forming elementary harmonic components in order to compare their properties by applying the theory of discrete signals and systems, as well as methods of spectral analysis and discrete signals filtering. The harmonic analysis versatility is that any periodic signal may be synthesized from harmonic oscillation of certain amplitude, frequency and initial phase. A mathematical model for determining the phase current harmonic content of power supply networks with isolated neutral and non-linear loads types and, as a consequence, the distortion of sinusoidal phase current change is developed by multiplying the analog current in time dependency on the grate delta-function with different sampling intervals, in which the use of simple and widely used in relay protection units, in particular electronic overcurrent relays, mathematical operations of integration squares instantaneous current allows the most in harmony with the mathematical tools to build other network protection types. Findings. The necessity to increase the sensitivity of the induction motors heat protection from overload currents taking into account nonlinear distortion of the phase currents is proved. By nonlinear distortion harmonic analysis of the phase currents the motor protection reliability increasing provided by taking into account the higher harmonic components of the phase currents, which causes to additional losses and heating of the stator winding. It uses the simplest and widely used in protective relaying mathematical apparatus determining of most significant higher harmonics

Physical protection in relation to IAEA safeguards

International Nuclear Information System (INIS)

Sonnier, C.S.

1984-01-01

The general structure of the safeguards system, the SSAC interfaces, and physical protection principles, equipment, and techniques are reviewed. In addition, the interactions between the State, the facility operator, and the IAEA are described

Physical protection of nuclear operational units

International Nuclear Information System (INIS)

1981-07-01

The general principles of and basic requirements for the physical protection of operational units in the nuclear field are established. They concern the operational units whose activities are related with production, utilization, processing, reprocessing, handling, transport or storage of materials of interest for the Brazilian Nuclear Program. (I.C.R.) [pt

Complementarities Between Nuclear Security, Safeguards and State System of Accounting for and Control

International Nuclear Information System (INIS)

Jalouneix, J.

2010-01-01

Nuclear security deals with prevention against theft and diversion of nuclear materials and sabotage against nuclear materials or installations. It is based on provisions of physical protection of nuclear materials and facilities complemented by: - Provisions for accounting for and control to prevent and, where appropriate, detect loss, theft or diversion of nuclear materials; - The nuclear safety provisions to protect nuclear materials and facilities against sabotage. Safeguards are based on the statements and accounting controls in the facilities. The respective aim of EURATOM and IAEA controls is to verify afterwards the respect for the declared use of materials or political commitments undertaken by States under the non-proliferation purpose. However, EURATOM and IAEA controls are not exercised at all facilities (including those working for defence purposes) or in respect of all nuclear materials subject to the French national control. In addition, these international safeguards do not deal with physical protection of nuclear materials which is the sole responsibility of the State. The state control, implemented in France, is positioned upstream to the international controls. It aims to prevent, deter and detect the loss, theft or diversion of nuclear materials in installations or during transport. It places the responsibility of a possible diversion at the operator level. It is made of different components that complement each other and form a coherent whole. This includes: - physical protection; - accounting for and control; - inspections. The physical protection system has to protect nuclear materials against a malicious act. Malicious act means a theft or diversion of nuclear material or an act of sabotage affecting nuclear materials or facilities which could lead to radiological releases into the environment. The accounting for and control system of nuclear materials has to allow the continuous and accurate knowledge of the quantity, quality and location

Design and implementation of a radiotherapy programme: Clinical, medical physics, radiation protection and safety aspects

International Nuclear Information System (INIS)

1998-09-01

It is widely acknowledged that the clinical aspects (diagnosis, decision, indication for treatment, follow-up) as well as the procedures related to the physical and technical aspects of patient treatment must be subjected to careful control and planning in order to ensure safe, high quality radiotherapy. Whilst it has long been recognized that the physical aspects of quality assurance in radiotherapy are vital to achieve and effective and safe treatment, it has been increasingly acknowledged only recently that a systematic approach is absolutely necessary to all steps within clinical and technical aspects of a radiotherapy programme as well. The need to establish general guidelines at the IAEA, taking into account clinical medical physics, radiation protection and safety considerations, for designing and implementing radiotherapy programmes in Member States has been identified through the Member States' increased interest in the efficient and safe application of radiation in health care. Several consultants and advisory group meetings were convened to prepare a report providing a basis for establishing a programme in radiotherapy. The present TECDOC is addressed to all professionals and administrators involved in the development, implementation and management of a radiotherapy programme in order to establish a common and consistent framework where all steps and procedures in radiotherapy are taken into account

The status of United States R and D programs in safeguards and physical protection

International Nuclear Information System (INIS)

Mangan, D.L.; Tape, J.W.

1993-01-01

The breakup of former Soviet Union and the strategic nuclear arms reduction agreements, START 1 and 2, when fully implemented, will result in the significant reduction and dismantlement of nuclear weapons. These events will produce the significant increase of stored nuclear materials requiring the utmost control and care for indefinite future. Some of these materials in addition to existing wastes and residues may need further processing. The control of nuclear materials through safeguards, both domestic and international, is one of only a few effective barriers to nuclear proliferation. The improved technology is the key to the cost effective safeguards of nuclear materials. The Department of Energy carries out the research and development programs at its national laboratories. As the most notable demonstration and training efforts of new technologies, there is International Training Courses on the State System of Accounting and Control and the Physical Protection of Nuclear Facilities and Materials. The Office of Research and Development of the Office of Intelligence and National Security Affairs, the Department of Energy, the Office of Safeguards and Security, International Safeguards Division and so on carry out the activities of the R and D on safeguards and physical protection. (K.I.)

Proceedings of the Ninth Radiation Physics and Protection Conference

International Nuclear Information System (INIS)

2009-01-01

The publication has been set up as proceedings of the Radiation Physics and Protection conference, the conference contains of the following subjects: Radiation Sources and Radioactive Waste; Theoretical Radiation Physics; Experimental Radiation Physics; Radiation and Nuclear Emergency; Non Ionizing Radiation; Medical Physics; Environment; Natural Radioactivity; Radiation Effect; Dosimetry; Elemental Analysis; Radiation Instruments. This conference consists of one volume and 459 pages., figs., tabs., refs

Radiation protection in the age of accountability - measuring our effectiveness

International Nuclear Information System (INIS)

Hutchinson, D.E.

1993-01-01

Effectiveness and accountability were catch-words of the 1980s for public and private enterprises. This mood has persisted into the current decade and radiation protection authorities have not escaped the organisational microscope. But whereas simple models and measures of effectiveness can be applied to most private companies and government agencies, organisations in the regulatory and preventative health areas cannot be assessed by the same criteria. These organisations are fundamentally different because their primary objective is one of minimisation. This paper looks at options for measuring and reporting the effectiveness of radiation protection organisations. Some performance indicators are proposed and evaluated. The intention is not, however, to present a 'solution' to this apparently vexing problem. Indeed, the answer may be that there is none. 11 refs., 4 figs

10 CFR 73.37 - Requirements for physical protection of irradiated reactor fuel in transit.

Science.gov (United States)

2010-01-01

... fuel in transit. 73.37 Section 73.37 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.37 Requirements for physical protection of irradiated reactor fuel in transit. (a) Performance objectives. (1...

Physical Protection Study of the Radio metallurgy Installation Using SAVIComputer Program

International Nuclear Information System (INIS)

Pinitoyo, Andreas

2000-01-01

Based on IAEA Recommendation on INFCIR/225/Rev.3 (The Physical Protectionof Nuclear Material), a nuclear installation shall have physical protectionsystem for protection or being secure on sabotage activities in theinstallation and thieve of nuclear materials. The recommendation states therequirements for physical protection of nuclear materials usage, transit andstorage. Radio metallurgy Installation of the Fuel Element and ReprocessingDevelopment Center (BATAN) at Serpong is a nuclear installation for researchon post irradiation of high radioactive spent fuel element, its processingand storage. The installation has risk on threat of a sabotage, which isdominant than thieve. The RMI building was designed and constructed ofphysical protection components and have been integrated with the BATAN Safetyand Security System and the Security Guards functions to be PhysicalProtection System for the RMI. By using the SAVI Computer Program with inputdata from the existing standards, assumptions for detection possibility,delay and response, that will result the probability of interruptions of theworst adversary paths PI = 0.1. These mean that the physical protectionsystems of the RMI shall be upgraded and improved in order to be reliable orbetter if the most of paths to the target PI = 1.0. (author)

A Regulators Systematic Approach to Physical Protection for Nuclear Facilities

International Nuclear Information System (INIS)

Bayer, Stephan; Doulgeris, Nicholas; Leask, Andrew

2004-01-01

This paper outlines the framework for a physical protection regime which needs to be incorporated into the design and construction phases of nuclear facility. The need for physical protection considerations at the outset of the design of nuclear facilities is explained. It also discusses about the consequences of malicious activity and the management of risk. Various risk and consequences evaluations are undertaken, notably using design basis threat methodology. (author)

Game theoretic analysis of physical protection system design

International Nuclear Information System (INIS)

Canion, B.; Schneider, E.; Bickel, E.; Hadlock, C.; Morton, D.

2013-01-01

The physical protection system (PPS) of a fictional small modular reactor (SMR) facility have been modeled as a platform for a game theoretic approach to security decision analysis. To demonstrate the game theoretic approach, a rational adversary with complete knowledge of the facility has been modeled attempting a sabotage attack. The adversary adjusts his decisions in response to investments made by the defender to enhance the security measures. This can lead to a conservative physical protection system design. Since defender upgrades were limited by a budget, cost benefit analysis may be conducted upon security upgrades. One approach to cost benefit analysis is the efficient frontier, which depicts the reduction in expected consequence per incremental increase in the security budget

Conceptual design of technical security systems for Russian nuclear facilities physical protection

International Nuclear Information System (INIS)

Izmailov, A.V.

1995-01-01

Conceptual design of technical security systems (TSS) used in the early stages of physical protection systems (PPS) design for Russia nuclear facilities is discussed. The importance of work carried out in the early stages was noted since the main design solutions are being made within this period (i.e. selection of a structure of TSS and its components). The methods of analysis and synthesis of TSS developed by ''Eleron'' (MINATOM of Russia) which take into account the specific conditions of Russian nuclear facilities and a scope of equipment available are described in the review. TSS effectiveness assessment is based on a probability theory and a simulation. The design procedure provides for a purposeful choice of TSS competitive options including a ''cost-benefit'' criterion and taking into account a prechosen list of design basis threats to be used for a particular facility. The attention is paid to a practical aspect of the methods application as well as to the bilateral Russian-American scientific and technical co-operation in the PPS design field

A proposal how to take into account inhomogeneous radiation fields in radiation protection

International Nuclear Information System (INIS)

Tschurlovits, M.

1996-01-01

External radiation fields exposing the human body inhomogenously are not considered neither in radiation protection standards nor in recent ICRU recommendations, but appear frequently in practical radiation protection. A proposal to solve this question is given taking into account both a conceptual and a metrological approach. The proposal suggests that a mean over an area of about 100 cm 2 can be taken as reference area for compliance with limits in terms of effective dose. (author)

Applications of the INFCIRC225/rev5 to the national physical protection regime

International Nuclear Information System (INIS)

Kim, Jae Gwang

2011-01-01

The IAEA's first effort for playing a key role in physical protection of nuclear material and facilities resulted in the publication of 'Recommendations for the physical protection of nuclear material' in 1972. These recommendations were revised by a group of experts in co-operation with the IAEA Secretariat and the revised version was published in 1975 in INFCIRC/225. The document was subsequently revised in 1977(rev.1), 1989(rev.2), in 1993(rev.3) and 1998(rev4). The Physical Protection regime in ROK has been established on the basis of INFCIRC225 rev4 since 2004 IAEA recently published The INFCIRC 225 rev5 through the 2 years expert consultations. The publication recommended 12 nuclear security fundamentals and requirements of physical protection of nuclear material and nuclear facility to the member states. This paper suggests the several applications to the national physical protection system from the 12 fundamentals and the requirements

Upgrading nuclear material protection, control and accounting in Russia

International Nuclear Information System (INIS)

Caravelli, Jack; Behan, Chris; Fishbone, Les

2001-01-01

focus on implementation of the upgrades at the Russian nuclear sites, and on certain national or infrastructure areas: Regulatory Development; Training; Physical Inventory Taking and Material Balance; Computerized Material Accounting and Control; Bar Coding; Nondestructive Assay Measurements; Bulk (Weight and Volume) Measurements; Tamper-Indicating Devices; Nuclear Material Pedestrian Portal Monitors; Access Control; Building Hardening; Federal Information System. III. Results - To date, after more than six years of work, significant progress has been achieved in a variety of ways. For example: Security improvements are underway on some 750 metric tons of highly enriched uranium and plutonium at many sites under the supervision of Minatom, Gosatomnadzor, the Russian Navy, and other Russian entities. Among these are an ingenious concrete-block delay system for plutonium storage at the Mayak Production Association and an inventory strategy at the Institute of Physics and Power Engineering that, by fostering the consolidation of items, reduces the time required to inventory them. About 850 kg of HEU have been converted to low-enriched uranium in a project that is now active at two processing sites; More than 1000 Russian MPC and A staff have undergone training at the Russian Methodological and Training Center; and Hardening of more than 90 transport vehicles has enhanced transport security. We will illustrate this progress in the paper by describing the MPC and A upgrade work at specific Russian sites. IV. Discussion - During its existence, the MPC and A Program has confronted several problems. They include issues surrounding taxation, exports, travel, assurances, and business practice. Most have been overcome, but sometimes only after long and sustained effort. Positive results have been achieved because of the mutual desire of the United States and Russia to address the need for enhanced nuclear material protection, control and accounting at Russian nuclear sites. Yet

A Road map for Establishing the Physical Protection Regime of Nuclear Materials and Facilities

International Nuclear Information System (INIS)

Yoo, Ho-Sik; Kwak, Sung-Woo; Jang, Sung-Soon; Kim, Jae-Kwang; Kim, Jung-Soo; Yoon, Wan-Ki

2007-01-01

The importance of physical protection for nuclear materials and facilities that can be an objective for terrorists has never been more stressed. The responsibility for physical protection within a State does not rest entirely with that state because cross-border transactions related to nuclear materials increase as nuclear related industries expand. The international community has prepared measures to strengthen the regime of physical protection such as the IAEA's proposal of the 'Nuclear Security Plan for 2006-2009' and UN's resolution on 'the International Convention for the Suppression of Acts of Nuclear Terrorism'. In order to cope with this, Korea has also made efforts to establish the implementation system for physical protection in the field of nuclear industries since the law for Physical Protection of Nuclear Material and Facility and Radiological Emergency Preparedness (LPPREP) was promulgated in 2004. The detailed plans should be prepared to accomplish this. This study has been performed to derive the items for establishing the regime of physical protection. The items derived were classified as short, mid and long-term depending on their characteristics and environmental circumstances. The regime of national physical protection will be established if the studies on these items are carried out successfully and tangible results are obtained

Swedish Environmental and Economic Accounts. Physical accounts for energy and emissions to air 1993 and 1995

International Nuclear Information System (INIS)

2000-01-01

This Statistical Report presents results from the physical Swedish Environmental and Economic Accounts for the years 1993 and 1995 according to the classification NACE. The Environmental Economic Accounts constitute an integrated and comprehensive system for environmental and economic statistics. Environmental data are systematically presented together with economic data in a common framework. The system can be used for analyses of various relationships between economy and environment. Data on emissions to air of carbon dioxide, sulphur dioxide, nitrogen oxides, carbon monoxide, methane, nitrous oxide and ammonia are presented for 39 industries, government services and private consumption. The use of energy commodities in monetary and physical terms are also presented for the same sectors. Economic, energy and emission data are also presented in environmental and economic profiles and indicators. Environmental and economic profiles provide an illustration of the relationship between industry, consumption of energy commodities and emission to air. Indicators, that show e.g. emissions (in kg) by value added (in SEK) for economic activities, is another way to illustrate the relation between emissions and economic data

Strengthened implementation of physical protection of nuclear material and nuclear facilities in the Republic of Korea

International Nuclear Information System (INIS)

Shim, H.-W.; Lee, J.-U.

2005-01-01

Full text: Since the 9.11 terror, strengthening physical protection has been an accelerated trend internationally. IAEA has been requesting that member states implement a strengthened physical protection of nuclear facilities on the basis of threat assessments. In order to cope with this demand, the Korean government promulgated the 'Law for Physical Protection and Radiological Emergency Preparedness (LPPRE)' as a substantial countermeasure against possible threats. Pursuant to LPPRE, which entered into force on February 16, 2004, nuclear enterprisers are obliged to implement an effective physical protection of nuclear materials, get approval for its physical protection system, and be constantly inspected on. The Ministry of Science and Technology (MOST) approved physical protection regulations of 24 domestic facilities operated by 14 enterprisers. National Nuclear management and Control Agency (NNCA) is entrusted with physical protection related duty and has been conducting physical protection inspection on nuclear materials in use, storage and transport. In addition, NNCA has established the methodology of threat assessment that entails organizing the threat assessment working group to develop a design basis threat (DBT). Korea is putting its best efforts to construct the threat assessment system and strengthen domestic physical protection regime in cooperation with competent authorities. (author)

Proceedings of the Eleventh Radiation Physics and Protection Conference

International Nuclear Information System (INIS)

2013-01-01

The proceeding contains of 404 pages, the available maertial of 35 contributions: and covering of conference topics: Plenary, Invited, Keynote Talks. Nuclear Power Plant Accident. Cosmogenic Radionuclides. Waste Storage and Disposal Solutions. Radiation Medical Physics. Radiation Detection and Measurements. Radioactive in Building Materials. Radiation Protection Regulations and public Protection. Environmental Radioactivity.

Cost and performance analysis of physical protection systems - a case study

International Nuclear Information System (INIS)

Hicks, M.J.; Snell, M.S.; Sandoval, J.S.; Potter, C.S.

1998-01-01

Design and analysis of physical protection systems requires (1) identification of mission critical assets; (2) identification of potential threats that might undermine mission capability; (3) identification of the consequences of loss of mission-critical assets (e.g., time and cost to recover required capability and impact on operational readiness); and (4) analysis of the effectiveness of physical protection elements. CPA -- Cost and Performance Analysis -- addresses the fourth of these four issues. CPA is a methodology that joins Activity Based Cost estimation with performance-based analysis of physical protection systems. CPA offers system managers an approach that supports both tactical decision making and strategic planning. Current exploratory applications of the CPA methodology address analysis of alternative conceptual designs. Hypothetical data is used to illustrate this process

New evaluation system for antisabotage physical protection

International Nuclear Information System (INIS)

Itakura, Shuichiro; Nakagome, Yoshihiro

2008-01-01

The discussion on an appropriate level of physical protection has not been elaborated so far because of the confidentiality of its nature, thus resulting in a lack of consensus on this issue. In view of this context, a new system for the evaluation of antisabotage physical protection systems is proposed in this paper, in which we introduce openness to a certain extent in the process of the evaluation. The proposed system is composed of the following three elements; (1) establishment of an evaluation basis threat (EBT), which should be less strong but more likely to occur than the design basis threat (DBT); (2) employment of realistic standard scenarios in the process of evaluation; (3) disclosure of results of evaluation implemented based on the above EBT and standard scenarios. It is expected that this considerably open system will foment peace of mind among citizens as well as create a deterrent effect that would minimize the occurrence of sabotage on nuclear facilities. (author)

10 CFR 73.60 - Additional requirements for physical protection at nonpower reactors.

Science.gov (United States)

2010-01-01

... nonpower reactors. 73.60 Section 73.60 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION... requirements for physical protection at nonpower reactors. Each nonpower reactor licensee who, pursuant to the... perform their duties. (6) Prior to entry into a material access area, packages shall be searched for...

Metrology of radiation protection. Pt. 1. Physical requirements and terminology

Energy Technology Data Exchange (ETDEWEB)

Wagner, S R

1979-10-01

Starting from a general consideration of the needs for radiation protection the physical requirements of a relevant metrology are developed. The expedient physical quantities are introduced and problems in the realization and dissemination of their units discussed. It is shown that owing to these difficulties, derived or operational quantities have to be developed for the construction and calibration of practical measuring instruments. Finally the relations between the metrology of radiation protection and of medical radiology are pointed out and commented. (orig.).

Conceptual Framework for Physical Protection Against Sabotage Considering Plant-specific Radiological Consequences

International Nuclear Information System (INIS)

Lee, Joung Hoon; Yu, Dong Han

2010-01-01

According to the Generation IV (Gen IV) Technology Roadmap, Gen IV nuclear energy systems (NESs) should highlight proliferation resistance and physical protection (PR and PP) as one of the four goals along with sustainability, safety and reliability, and economics. Especially, physical protection (PP) is the typical important characteristic of an NES that impedes the theft of materials suitable for nuclear explosives or radiation dispersal devices (RDD) and the sabotage of facilities and transportation by subnation entities and other non-Host State adversaries. These two subjects have been studied separately. Proliferation is commonly considered as an international concern and the past work on the PR assessments can be found. On the other hands, PP is regarded as a State security concern, much of which is classified and facility-dependent. Recently, more concern has been focused on the PP design and regulation because of rapid environment changes including radiological consequences by internal sabotage and nuclear terrorism by RDDs. The current PP Regulation has been applied intensively to the existing nuclear facilities and could be a possible guidance for the future GEN-IV NESs. This paper first reviews the IAEA guide document, INFCIRC/225, which was accepted as the standard international guideline in the physical protection area. It has been updated several times up to now, and is undergoing another revision. The paper introduces current substantial changes in the document regarding PP including the national nuclear security and sabotage in the nuclear facilities. Then, it presents a conceptual framework for physical protection against sabotage considering plant-specific radiological consequence after malicious acts within certain vital areas. The framework combines the newly developed method of vital area identification, the current PSA level 2 works, and physical protection concepts. This would help to improve a design concept of new physical protection

Conceptual Framework for Physical Protection Against Sabotage Considering Plant-specific Radiological Consequences

Energy Technology Data Exchange (ETDEWEB)

Lee, Joung Hoon; Yu, Dong Han [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

2010-10-15

According to the Generation IV (Gen IV) Technology Roadmap, Gen IV nuclear energy systems (NESs) should highlight proliferation resistance and physical protection (PR and PP) as one of the four goals along with sustainability, safety and reliability, and economics. Especially, physical protection (PP) is the typical important characteristic of an NES that impedes the theft of materials suitable for nuclear explosives or radiation dispersal devices (RDD) and the sabotage of facilities and transportation by subnation entities and other non-Host State adversaries. These two subjects have been studied separately. Proliferation is commonly considered as an international concern and the past work on the PR assessments can be found. On the other hands, PP is regarded as a State security concern, much of which is classified and facility-dependent. Recently, more concern has been focused on the PP design and regulation because of rapid environment changes including radiological consequences by internal sabotage and nuclear terrorism by RDDs. The current PP Regulation has been applied intensively to the existing nuclear facilities and could be a possible guidance for the future GEN-IV NESs. This paper first reviews the IAEA guide document, INFCIRC/225, which was accepted as the standard international guideline in the physical protection area. It has been updated several times up to now, and is undergoing another revision. The paper introduces current substantial changes in the document regarding PP including the national nuclear security and sabotage in the nuclear facilities. Then, it presents a conceptual framework for physical protection against sabotage considering plant-specific radiological consequence after malicious acts within certain vital areas. The framework combines the newly developed method of vital area identification, the current PSA level 2 works, and physical protection concepts. This would help to improve a design concept of new physical protection

A programmatic challenge - accelerating, expanding, and innovating physical protection

International Nuclear Information System (INIS)

Caravelli, J.

2002-01-01

Full text: In the wake of the September 11th terrorists attacks, the Office of international material protection and cooperation is responding to the international community's call to strengthen a global response to the serious challenge of securing nuclear material with the aim of preventing nuclear terrorism. Recent events underline the urgency to proactively address the threat posed by insufficiently secured nuclear material. The sobering reality is that, at present, the threat is disproportional to international efforts to mitigate and stop the proliferation of nuclear materials. The potential consequences of failing to address deficiencies in security systems, or for that matter aiming at anything below 'comprehensive' nuclear material security' is a horrifying reminder of the incredible challenge that we are facing. Against this backdrop, our Office has undertaken a comprehensive program review and is making all possible efforts to expand, accelerate and innovate our physical protection approach. The presentation that I propose to deliver will provide an overview of our new thinking regarding the vulnerability of nuclear/radioactive material post 9-11, touch on some of the obstacles that we are experiencing, and outline the steps that we are aggressively pursuing with the aim of achieving real threat reduction. My presentation will begin with a look at the success and knowledge gained from the bilateral material protection, control and accounting (MPC and A) cooperation between the United States and the Russian Federation and use this as a platform from which to launch a wider discussion on international efforts to strengthen practices for protecting nuclear material. I will examine lessons learned from our cooperation in relation to their applicability to today's security challenges and will outline how we are expanding on our traditional mission to address emerging threats. I will discuss programmatic efforts to bolster traditional, first line of defense

Great experiments in physics firsthand accounts from Galileo to Einstein

CERN Document Server

1959-01-01

From Galileo's famous experiments in accelerated motion to Einstein's revolutionary theory of relativity, the experiments recorded here trace the evolution of modern physics from its beginnings to the mid-20th century. Brought together for the first time in one volume are important source readings on 25 epochal discoveries that changed man's understanding of the physical world. The accounts, written by the physicists who made them, include:Issac Newton: The Laws of MotionHenry Cavendish: The Law of GravitationAugustin Fresnel: The Diffraction of LightHans Christian Oersted: ElecromagnetismH

Radiation Protection and Dosimetry An Introduction to Health Physics

CERN Document Server

Stabin, Michael G

2007-01-01

This comprehensive text provides an overview of all relevant topics in the field of radiation protection (health physics). Radiation Protection and Dosimetry serves as an essential handbook for practicing health physics professionals, and is also ideal as a teaching text for courses at the university level. The book is organized to introduce the reader to basic principles of radiation decay and interactions, to review current knowledge and historical aspects of the biological effects of radiation, and to cover important operational topics such as radiation shielding and dosimetry. In addition to presenting the most up to date treatment of the topics and references to the literature, most chapters contain numerical problems with their solutions for use in teaching or self assessment. One chapter is devoted to Environmental Health Physics, which was written in collaboration with leading professionals in the area.

Risk Assessment Methodology for Protecting Our Critical Physical Infrastructures

Energy Technology Data Exchange (ETDEWEB)

BIRINGER,BETTY E.; DANNEELS,JEFFREY J.

2000-12-13

Critical infrastructures are central to our national defense and our economic well-being, but many are taken for granted. Presidential Decision Directive (PDD) 63 highlights the importance of eight of our critical infrastructures and outlines a plan for action. Greatly enhanced physical security systems will be required to protect these national assets from new and emerging threats. Sandia National Laboratories has been the lead laboratory for the Department of Energy (DOE) in developing and deploying physical security systems for the past twenty-five years. Many of the tools, processes, and systems employed in the protection of high consequence facilities can be adapted to the civilian infrastructure.

Taking into account radiation protection for the EPR (European pressurized water reactor) design

International Nuclear Information System (INIS)

Michoux, X.

2005-01-01

For a designer, the taking into account of radiation protection for the EPR design is based on several thrusts which concern different scopes as choice of materials, checking of design's options, layout of components and systems able to contain radioactivity in different states of operation (i.e.: pressurizer, tanks, actives systems separated from non actives systems), or the optimization of shielding according to the estimated maintenance during outage or during power operation. The EPR method used for radiation protection studies is close to the safety method (use of dose gauge, demonstration of radiation protection, works with high stake regarding the radiation protection studied in priority, parametric studies with use of one field Radiation protection...). Results of this method place EPR in a satisfactory progress compared to the best existing nuclear plants, regarding collective doses and privileging the most exposed workers. This method has also induced on the EPR Project the choice of working during power operation in order to obtain shorts outages, scrupulously respecting security rules, radiation protection and human factor. (author)

Fundamentals of health physics for the radiation-protection officer

Energy Technology Data Exchange (ETDEWEB)

Murphy, B.L.; Traub, R.J.; Gilchrist, R.L.; Mann, J.C.; Munson, L.H.; Carbaugh, E.H.; Baer, J.L.

1983-03-01

The contents of this book on health physics include chapters on properties of radioactive materials, radiation instrumentation, radiation protection programs, radiation survey programs, internal exposure, external exposure, decontamination, selection and design of radiation facilities, transportation of radioactive materials, radioactive waste management, radiation accidents and emergency preparedness, training, record keeping, quality assurance, and appraisal of radiation protection programs. (ACR)

Fundamentals of health physics for the radiation-protection officer

International Nuclear Information System (INIS)

Murphy, B.L.; Traub, R.J.; Gilchrist, R.L.; Mann, J.C.; Munson, L.H.; Carbaugh, E.H.; Baer, J.L.

1983-03-01

The contents of this book on health physics include chapters on properties of radioactive materials, radiation instrumentation, radiation protection programs, radiation survey programs, internal exposure, external exposure, decontamination, selection and design of radiation facilities, transportation of radioactive materials, radioactive waste management, radiation accidents and emergency preparedness, training, record keeping, quality assurance, and appraisal of radiation protection programs

Study of Physical Protection System at PUSPATI TRIGA Reactor (RTP)

International Nuclear Information System (INIS)

Ligam, A.S.; Ina, I.; Zarina Masood

2016-01-01

Physical protection program at PUSPATI TRIGA Reactor (RTP) which is located at Nuklear Malaysia, Bangi Complex has been strengthened and upgraded from time to time to accommodate current situation needs. However, there is always room for improvement. Hence, study have been made to look deeper into physical protection components such as delay systems, external sensors, PPS intruder alarm sensors, use of video system, personnel security or insider threats, access control operation system operation rules and security culture that may need to take into consideration. (author)

Present status and progress of safeguards activities and physical protection on the eve of year 2000 in Bulgaria

International Nuclear Information System (INIS)

Simov, R.; Gotzev, A.

1999-01-01

From the very beginning of the IAEA safeguards implementation in Bulgaria, up to now the IAEA inspections verified no deviations or uncertainties in accounting of the nuclear materials. According to the official IAEA reports Bulgaria has fulfilled completely its duties under the safeguards and the Non-proliferation Treaty and has fully assisted the IAEA inspection activity. As for the physical protection, the complicated up-to-date system was established contributing to the safety of Kozloduy NPP and the plant operation

Taking into account of effects of finite geometry in a neutron-physical experiment

International Nuclear Information System (INIS)

Dushin, V.N.; Ippolitov, V.T.

1981-01-01

Problems for account of finite geometry of neutron-physical experiment are considered from the point of view of increasing the determination accuracy of nuclear-physical constants (NPC). A three-equation system, which relates studied nuclear-physical characteristics of the target to experimental results obtained at the output of registering device, is presented. A problem of accurate NPC determination is the solution of the given system in relation to parameters sought for, it is a so-called reverse problem of the irradiation transfer theory. A method of error matrix determination measuring NPC, with the help of the introduction of the sensitivity coefficients is considered. Proposed interpretation of reverse problems of the irradiation transfer theory is effective during the planning of experimental investigations taking into account correlation properties of experimental techniques [ru

LEGAL PROTECTION FOR CUSTOMER SEGREGATED ACCOUNT OWNER FROM LOSS DUE TO THE BANKCRUPTY OF FUTURES BROKERAGE FIRM

Directory of Open Access Journals (Sweden)

Yessy Meryantika Sari

2016-05-01

Full Text Available Commodity futures trading is a business activity that is complex and involves many parties including Client Segregated Account and Brokerage Company. This business promises huge benefits but ba-lanced with a high risk of loss. Therefore, a potential event of bankruptcy. Customer as the owner of the funds which mandated funds to the brokerage company to be managed for purposes of the transaction, should get legal protection from potential losses due to bankruptcy of futures brokerage firm. The spirit of the law in protection for customers is reflected in the preamble of le-gal norms futures trading as further elaborated in the general legal provisions stipulated in the Fu-tures Trading Act. Keywords : Legal Protection, Customer Segregated Account Owner, Broker, Bankruptcy Law

Safety Analysis in Design and Assessment of the Physical Protection of the OKG NPP

Energy Technology Data Exchange (ETDEWEB)

Lindahl, P., E-mail: par.lindahl@okg.eon.se [OKG Aktiebolag, Oskarshamn (Sweden)

2014-10-15

OKG AB operates a three unit nuclear power plant in the southern parts of Sweden. As a result of recent development of the legislation regarding physical protection of nuclear facilities, OKG has upgraded the protection against antagonistic actions. The new legislation includes requirements both on specific protective measures and on the performance of the physical protection as a whole. In short, the performance related requirements state that sufficient measures shall be implemented to protect against antagonistic actions, as defined by the regulator in the “Design Basis Threat” (DBT). Historically, physical protection and nuclear safety has been managed much as separate issues with different, sometimes contradicting, objectives. Now, insights from the work with the security upgrade have emphasized that physical protection needs to be regarded as an important part of the Defence-In-Depth (DiD) against nuclear accidents. Specifically, OKG has developed new DBT-based analysis methods, which may be characterized as probabilistically informed deterministic analysis, conformed to a format similar to the one used for conventional internal events analysis. The result is a powerful tool for design and assessment of the performance of the protection against antagonistic actions, using a nuclear safety perspective. (author)

75 FR 33901 - Physical Protection of Byproduct Material

Science.gov (United States)

2010-06-15

... positioning system (GPS) tracking as a national requirement for vehicles transporting highly radioactive..., Maryland. NRC's Agencywide Documents Access and Management System (ADAMS): Publicly available documents... also proposed to establish physical protection systems to detect, assess, and respond to unauthorized...

The Tile-map Based Vulnerability Assessment Code of a Physical Protection System: SAPE (Systematic Analysis of Protection Effectiveness)

International Nuclear Information System (INIS)

Jang, Sung Soon; Kwak, Sung Woo; Yoo, Ho Sik; Kim, Jung Soo; Yoon, Wan Ki

2008-01-01

Increasing threats on nuclear facilities demands stronger physical protection system (PPS) within the limited budget. For this reason we need an efficient physical protection system and before making an efficient PPS we need to evaluate it. This evaluation process should faithfully reflect real situation, reveal weak points and unnecessary protection elements, and give comparable quantitative values. Performance based analysis helps to build an efficient physical protection system. Instead of regulating the number of sensors and barriers, the performance based analysis evaluates a PPS fit to the situation of a facility. The analysis assesses delay (sensors) and detection (barriers) of a PPS against an intrusion, and judges whether a response force arrives before intruders complete their job. Performance based analysis needs complicated calculation and, hence, several assessment codes have been developed. A code called the estimation of adversary sequence interruption (EASI) was developed to analyze vulnerability along a single intrusion path. The systematic analysis of vulnerability to intrusion (SAVI) code investigates multi-paths to a valuable asset in an actual facility. SAVI uses adversary sequence diagram to describe multi-paths

Determining which introductory physics topics pre-service physics teachers have difficulty understanding and what accounts for these difficulties

International Nuclear Information System (INIS)

Şahin, Esin; Yağbasan, Rahmi

2012-01-01

This study aims at diagnosing which subjects pre-service physics teachers have difficulty understanding in introductory physics courses and what accounts for these difficulties. A questionnaire consisting of two qualitative questions was used to collect data for this study. The questionnaire was administered to 101 pre-service physics teachers who have completed the courses Physics 1 (Mechanics 1), Physics 2 (Mechanics 2), Physics 3 (Electricity) and Physics 4 (Magnetism). Of the pre-service physics teachers 28 were second year, 26 were third year, 27 were fourth year and 20 were fifth year students. The results of the data analysis indicated that the percentage of students who think that Magnetism has the most difficult subjects is the highest compared to the others. The reasons why the pre-service physics teachers experience difficulty in understanding the subjects have been grouped into four categories. (paper)

States agree on stronger physical protection regime

International Nuclear Information System (INIS)

2005-01-01

Full text: Delegates from 89 countries agreed on 8 July to fundamental changes that will substantially strengthen the Convention on the Physical Protection of Nuclear Material (CPPNM). IAEA Director General Mohamed ElBaradei welcomed the agreement in saying 'This new and stronger treaty is an important step towards greater nuclear security by combating, preventing, and ultimately punishing those who would engage in nuclear theft, sabotage or even terrorism. It demonstrates that there is indeed a global commitment to remedy weaknesses in our nuclear security regime.' The amended CPPNM makes it legally binding for States Parties to protect nuclear facilities and material in peaceful domestic use, storage as well as transport. It will also provide for expanded cooperation between and among States regarding rapid measures to locate and recover stolen or smuggled nuclear material, mitigate any radiological consequences of sabotage, and prevent and combat related offences. The original CPPNM applied only to nuclear material in international transport. Conference President Dr. Alec Baer said 'All 89 delegations demonstrated real unity of purpose. They put aside some very genuine national concerns in favour of the global interest and the result is a much improved convention that is better suited to addressing the nuclear security challenges we currently face.' The new rules will come into effect once they have been ratified by two-thirds of the 112 States Parties of the Convention, expected to take several years. 'But concrete actions are already taking place around the world. For more than 3 years, the IAEA has been implementing a systematic Nuclear Security plan, including physical protection activities designed to prevent, detect and respond to malicious acts,' said Anita Nillson, Director of the IAEA's Office of Nuclear Security. The Agency's Nuclear Security Fund, set up after the events of 9/11, has delivered $19.5 million in practical assistance to 121 countries

Ethical Dilemmas in Protecting Susceptible Subpopulations From Environmental Health Risks: Liberty, Utility, Fairness, and Accountability for Reasonableness

Science.gov (United States)

Resnik, David B.; MacDougall, D. Robert; Smith, Elise M.

2018-01-01

Various U.S. laws, such as the Clean Air Act and the Food Quality Protection Act, require additional protections for susceptible subpopulations who face greater environmental health risks. The main ethical rationale for providing these protections is to ensure that environmental health risks are distributed fairly. In this article, we (1) consider how several influential theories of justice deal with issues related to the distribution of environmental health risks; (2) show that these theories often fail to provide specific guidance concerning policy choices; and (3) argue that an approach to public decision making known as accountability for reasonableness can complement theories of justice in establishing acceptable environmental health risks for the general population and susceptible subpopulations. Since accountability for reasonableness focuses on the fairness of the decision-making process, not the outcome, it does not guarantee that susceptible subpopulations will receive a maximum level of protection, regardless of costs or other morally relevant considerations. PMID:29466133

New Procedure for Account Operations at the CERN Service Desk

CERN Multimedia

The Computer Security Team

2011-01-01

Who can activate your computing account? Who can unblock it? And who can reset your password if you've forgotten it? Until recently, users who addressed such problems to the Service Desk were asked a set of questions...   The corresponding answers were designed to properly verify the requestor’s identity such that only the real owner could activate/unblock/reset his computing account. However, it turned out that the answers were easily obtainable (and that there is no better set of questions to ask). Therefore, in order to ensure optimal protection of your account, this procedure will be replaced on 28 November 2011. From that date on, users will be asked to produce a physical ID when requesting the Service Desk to perform operations like computer account activation, account unblocking or password resets. This physical ID can either be a passport/ID card or the CERN access card. If you need to activate/unblock/reset your computing account, you will either have to produ...

Development of a system for academic training of the personnel engaged in nuclear material protection, control and accounting in Russia

International Nuclear Information System (INIS)

Onykiy, B.N.; Kryuchkov, E.F.

2005-01-01

The main attention in the present paper is focused on discussing the educational problems in the area of nuclear materials physical protection, control and accountability (MPC and A) in Russia. Currently, only the Master of Science Graduate Program has been completely developed for students training. This is taking place at Moscow Engineering Physics Institute (State University, MEPhI), where the sixth generation of Masters has graduated in May 2004. The MPC and A Engineer Degree Program, currently under development at MEPhI, is considered in the paper. This paper discusses specific features of the Engineer Degree training required by the Russian educational legislation and the Russian quality control system as applied to the training process. The paper summarises the main joint actions undertaken during the past three years by MEPhI in collaboration with the US Department of Energy and US National Laboratories for developing the MPC and A Engineer Degree Program in Russia. (author)

Computerized real-time materials accountability system for safeguards material control

International Nuclear Information System (INIS)

Spencer, W.F.; Affel, R.G.; Austin, H.C.; Nichols, J.P.; Stoutt, B.H.; Wachter, J.W.

1975-01-01

A real-time, computer-based system is described which provides safeguards material control at the Oak Ridge National Laboratory. Originally installed in 1972 to provide computerized real-time fissile materials accountability for criticality control purposes, the system has been expanded to provide accountability of all source and nuclear materials (SNM) and to utilize the on-line inventory files in support of the Laboratory physical protection and surveillance procedures. (auth)

Enhancement the physical protection system of the WWR-SM reactor at Institute of Nuclear Physics of Academy of Science of the Republic of Uzbekistan

International Nuclear Information System (INIS)

Karabaev, Kh.Kh.; Rakhimbaev, A.T.; Rakhmanov, A.B.; Salikhbaev, U.S.; Yuldashev, B.S.

2004-01-01

Full text: Joining of the Republic of Uzbekistan to Non-Proliferation Treaty required the revision of nuclear fuel protection system and radioactive sources from illegal access in all stages of work with nuclear materials. One of the primary technical actions of ensuring non-proliferation of nuclear materials is physical protection. The project was worked out on upgrading and enhancement of the physical protection of the reactor building. In cooperation with Sandia National Laboratory and support of the Department of Energy (DOE) USA The first stage of the physical protection upgrading provided for fresh fuel protection: - the new fresh fuel storage room was built and equipped with the modern control and detection system, - the reactor building was equipped with detection devices and access control, - the central alarm station (CAS) has been built and equipped with computer control and observing system, - code access system has been implemented. The first stage of upgrading of physical protection system was accomplished for 4 months, and put into operation in 1996. The second stage of physical protection system modernization included the construction of the second barrier of the physical protection, equipping it with observation and control devices and also extension of the CAS. The perimeter around the reactor building was cleaned from trees, bushed and in a short time a two-fence barrier was erected. The access control point provided the secured intensified control of the access to the reactor territory. The physical protection system was supplied with equipment for safeguard and TV observation of perimeter, access control to the territory of the reactor: - the CAS was extended and computer observation control system was upgraded, - the badge station has been constructed, equipped and set up, - all doors, windows, reactor hall gate have been replaced by strengthened metal ones, - uninterruptible power supply (UPS) and diesel-generator have been installed, - the

Physical protection system to detect and control the illicit trafficking and transfer of nuclear materials in Korea

Energy Technology Data Exchange (ETDEWEB)

Cho, Young Ho [Catholic Univ. of Daegu, Gyeongbuk (Korea, Republic of); Moon, Joo Hyun [Dongguk Univ., Gyeongbuk (Korea, Republic of)

2011-11-15

Physical protection has played an essential role in ensuring the implementation of global nuclear nonproliferation framework for the past decades. Since the 9/11 terrorist attacks upon the United States, physical protection has also played the same role in combating nuclear terrorism. Nowadays, physical protection is more highlighted than before with global nuclear security regimes more strengthened. Ever since the commencement of the first nuclear power plant in 1978, Korea has devotedly implemented international physical protection standards as an exemplary country in respect of the peaceful use of nuclear energy. The Korean government has recently reinforced national physical protection policy including the revision of laws and regulations. In this paper, the national policy is extensively reviewed and additional measures are proposed to enhance the national physical protection system. (orig.)

A Theoretical Analysis: Physical Unclonable Functions and The Software Protection Problem

Energy Technology Data Exchange (ETDEWEB)

Nithyanand, Rishab [Stony Brook Univ., NY (United States); Solis, John H. [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2011-09-01

Physical Unclonable Functions (PUFs) or Physical One Way Functions (P-OWFs) are physical systems whose responses to input stimuli (i.e., challenges) are easy to measure (within reasonable error bounds) but hard to clone. This property of unclonability is due to the accepted hardness of replicating the multitude of uncontrollable manufacturing characteristics and makes PUFs useful in solving problems such as device authentication, software protection, licensing, and certified execution. In this paper, we focus on the effectiveness of PUFs for software protection and show that traditional non-computational (black-box) PUFs cannot solve the problem against real world adversaries in offline settings. Our contributions are the following: We provide two real world adversary models (weak and strong variants) and present definitions for security against the adversaries. We continue by proposing schemes secure against the weak adversary and show that no scheme is secure against a strong adversary without the use of trusted hardware. Finally, we present a protection scheme secure against strong adversaries based on trusted hardware.

International physical protection self-assessment tool for chemical facilities.

Energy Technology Data Exchange (ETDEWEB)

Tewell, Craig R.; Burdick, Brent A.; Stiles, Linda L.; Lindgren, Eric Richard

2010-09-01

This report is the final report for Laboratory Directed Research and Development (LDRD) Project No.130746, International Physical Protection Self-Assessment Tool for Chemical Facilities. The goal of the project was to develop an exportable, low-cost, computer-based risk assessment tool for small to medium size chemical facilities. The tool would assist facilities in improving their physical protection posture, while protecting their proprietary information. In FY2009, the project team proposed a comprehensive evaluation of safety and security regulations in the target geographical area, Southeast Asia. This approach was later modified and the team worked instead on developing a methodology for identifying potential targets at chemical facilities. Milestones proposed for FY2010 included characterizing the international/regional regulatory framework, finalizing the target identification and consequence analysis methodology, and developing, reviewing, and piloting the software tool. The project team accomplished the initial goal of developing potential target categories for chemical facilities; however, the additional milestones proposed for FY2010 were not pursued and the LDRD funding therefore was redirected.

Advanced digital video surveillance for safeguard and physical protection

International Nuclear Information System (INIS)

Kumar, R.

2002-01-01

Full text: Video surveillance is a very crucial component in safeguard and physical protection. Digital technology has revolutionized the surveillance scenario and brought in various new capabilities like better image quality, faster search and retrieval of video images, less storage space for recording, efficient transmission and storage of video, better protection of recorded video images, and easy remote accesses to live and recorded video etc. The basic safeguard requirement for verifiably uninterrupted surveillance has remained largely unchanged since its inception. However, changes to the inspection paradigm to admit automated review and remote monitoring have dramatically increased the demands on safeguard surveillance system. Today's safeguard systems can incorporate intelligent motion detection with very low rate of false alarm and less archiving volume, embedded image processing capability for object behavior and event based indexing, object recognition, efficient querying and report generation etc. It also demands cryptographically authenticating, encrypted, and highly compressed video data for efficient, secure, tamper indicating and transmission. In physical protection, intelligent on robust video motion detection, real time moving object detection and tracking from stationary and moving camera platform, multi-camera cooperative tracking, activity detection and recognition, human motion analysis etc. is going to play a key rote in perimeter security. Incorporation of front and video imagery exploitation tools like automatic number plate recognition, vehicle identification and classification, vehicle undercarriage inspection, face recognition, iris recognition and other biometric tools, gesture recognition etc. makes personnel and vehicle access control robust and foolproof. Innovative digital image enhancement techniques coupled with novel sensor design makes low cost, omni-directional vision capable, all weather, day night surveillance a reality

Outline of a future security system to provide physical protection of nuclear installations

International Nuclear Information System (INIS)

Rossnagel, A.

1984-01-01

Nuclear energy, within three or four decades, may become a main pillar of the world's energy supply. The author discusses the problems entailed by the necessity to protect nuclear facilities against assaults, and whether this can be ensured without interference with civic rights. The method applied by the author to show the significance of the problems is to explain the current situation, and to compare it with a plausible outline of the developments to be expected over the next 50 years. He shows the hazards to be taken into account due to criminal actions by persons from outside, or by persons working in nuclear facilities. A main problem is the fact that the security system to be set up has to encompass not only the nuclear installation itself, but also the surrounding area, and the measures to be taken will have an impact on the society, which necessarily will curtail personal freedom. The author presumes that the necessity to guarantee physical protection of nuclear facilities will lead to a modification of the meaning of basic rights, and states his anxiety that security for nuclear installations might affect our concept of freedom. (HSCH) [de

Applications of fiber optics in physical protection

International Nuclear Information System (INIS)

Buckle, T.H.

1994-03-01

The purpose of this NUREG is to provide technical information useful for the development of fiber-optic communications and intrusion detection subsystems relevant to physical protection. There are major sections on fiber-optic technology and applications. Other topics include fiber-optic system components and systems engineering. This document also contains a glossary, a list of standards and specifications, and a list of fiber-optic equipment vendors

Outline of physical protection exercise field

International Nuclear Information System (INIS)

Kawata, Norio; Wakabayashi, Shuji; Naito, Aisaku

2012-01-01

The Integrated Support Center for Nuclear Nonproliferation and Nuclear Security (ISCN) of the Japan Atomic Energy Agency set up exercise facilities for trainee of nuclear power emerging countries in Asia involved in Physical Protection (PP) including government officers in charge of nuclear security policy or nuclear security regulation, planning and management staff of PP facilities of operating companies, design professionals for PP facilities, and security personnel responsible for PP. After April in 2012, the facility started to be applied to actual ISCN's PP training and is expected as training field for not only Asian nuclear emerging country but also domestic nuclear energy companies and regulatory bodies. In order to provide effective and practical exercises, we set up the training facilities with basic measures and equipment typical of those used in actual PP facilities, e.g., protective fences, sensors, and cameras. This paper provides an outline of the facilities. (author)

System dynamics simulation framework for the evaluation of physical protection system

International Nuclear Information System (INIS)

Kim, Chan Soo; Chung, Chang Hyun; Kwak, Sang Man; Kim, Sok Chul

2004-01-01

The events of September 11th, 2001 demonstrated the need for special considerations for the security of nuclear facilities against sabotage. Sabotage can be defined as any deliberate act directed against a nuclear facility or nuclear material in use, storage, or transport which could directly or indirectly endanger the environment or the health and safety of personnel or the public by exposure to radiation or the release of radioactive substances. Sabotage protection aims to protect and mitigate unacceptable radiological consequences. Conventional physical protection concept has focused of how to protect against or prevent intrusion of adversaries based of the Design Basis Threat (DBT) and has given only rare consideration to extreme malevolent envets such as the September 11th attack. Human induced external events were mostly screened out due to their low probabilities of occurrence. However, in this time, several countries have begun to define new design requirements for proliferation resistance and physical protection of new facilities against malevolent event such as those of September 11th, 2001

Study on countermeasures for effective assessment of domestic system of physical protection

International Nuclear Information System (INIS)

Lee, Jong Uk; An, J. S.; Min, G. S.; Yoon, W. K.; Kim, K. J.; Kim, J. K.; Lim, J. H.; Choe, K. K.; Park, S. G.

2004-04-01

Since the threat for nuclear facilities has increased due to the collapse of the Soviet Union and the allegations of Iraq and North Korean nuclear programmes, the concern for international regime of physical protection has been a hot issue worldwide. In addition, as the international strengthening trend of physical protection had been speeded up since the September 11th terror, Member States including the IAEA had agreed to revise the CPPNM(INFCIRC/274/rev.1) and prepared a draft amendment of CPPNM to establish their systems of physical protection based on threat assessment. However, Korean government has not yet established the domestic regime of threat assessment as well as national DBT for nuclear facilities, so it is very urgent to prepare the measures for them. As a domestic countermeasure for the international trend, Korean government promulgated a new 'Law for Physical Protection and Radiological Emergency'(LPPRE) on May 2003, which was based on establishing the regime of threat assessment, but it is necessary for us to construct the substantial countermeasures for its implementation as well as to legislate the following regulations of the LPPRE. Therefore, this study suggests the measures for constructing domestic regime of threat assessment in order to establish the legal and institutional framework and provides the efficient countermeasures for its implementation

Towards an integrated management of health physics and medical physics

International Nuclear Information System (INIS)

Mommaert, Chantal; Rogge, Frank; Cortenbosch, Geert; Schmitz, Frederic

2007-01-01

AVN is a licensed body that performs health physics control in different types of installations, from large nuclear facilities to small dentist cabinets. AVN can also provide medical physics services for the quality control of, for instance, medical devices used in a radiology or nuclear medicine department. Radiation protection for personnel and environment (health physics) and radiation protection for the patient (medical physics) are usually treated separately, using different referential documents, such as the European Directives 96/29/Euratom for health physics and 97/43/Euratom for medical physics. This difference is also clearly reflected in the Belgium legislation (two types of accreditation/licence for inspectors, different chapters in the law,..) From a practical point of view it is sometimes rather difficult to split the task 'on site' during an inspection. An RX system not complying with radiation protection criteria can definitively affect the patient as well as the workers. On the other hand, the hospitals, cannot easily differentiate these two tasks because they are not fully aware of the legislation and they are mixing both. Taking into account the health physics guidelines as well as medical physics guidelines, we have decided to move to an integrated approach of these two concepts. (orig.)

Educational and laboratory base for the expert training on physical protection of nuclear materials: the requirements and experience of practical implementation

International Nuclear Information System (INIS)

Bondarev, P.V.; Pogozhin, N.S.; Ryzhukhin, D.V.; Tolstoy, A.I.

2002-01-01

Full text: In expert training on physical protection of nuclear materials (NMPP) an educational and laboratory base has special importance. In these laboratories the students receive practical skills concerning physical protection systems (PPS). The basic requirements for creating such base are formulated in a certain educational program implemented at an educational institution. Thus it is necessary to take into account the following features of a modern nuclear object PPS: restriction of an object visiting with the purpose of acquaintance with features of a certain object PPS; dynamical change of PPS component nomenclature; increase of use of computer facilities for managing all PPS subsystems; increase of integration degree of separate subsystems in a uniform PPS complex; high cost of PPS components. Taking that into consideration a university, which assumes to begin the expert training on NMPP, is compelled to solve the following tasks: creation of its own laboratory base. The implementation of practical occupations with visiting a nuclear object cannot be executed practically; definition of quantity and structure of educational laboratories. Thus the features of the implemented educational plan should be taken into account in addition; optimization of expenses on laboratory creation. The regular updating of laboratory equipment structure is impossible in a practical manner. Therefore unique correct decision is to supply laboratories with the equipment, which uses the typical technological decisions on performing the basic PPS functions (detection, delay, estimation of a situation, neutralization); development of laboratory work conducting procedures (laboratory practical works); technical support of the created laboratories. The certain experience of solving the listed tasks is accumulated at the Moscow Engineering Physics Institute (State University) (MEPhl) while implementing 'Physical Protection, Control and Accountability of Nuclear Materials' master

Ethical Issues for Direct-to-Consumer Digital Psychotherapy Apps: Addressing Accountability, Data Protection, and Consent.

Science.gov (United States)

Martinez-Martin, Nicole; Kreitmair, Karola

2018-04-23

This paper focuses on the ethical challenges presented by direct-to-consumer (DTC) digital psychotherapy services that do not involve oversight by a professional mental health provider. DTC digital psychotherapy services can potentially assist in improving access to mental health care for the many people who would otherwise not have the resources or ability to connect with a therapist. However, the lack of adequate regulation in this area exacerbates concerns over how safety, privacy, accountability, and other ethical obligations to protect an individual in therapy are addressed within these services. In the traditional therapeutic relationship, there are ethical obligations that serve to protect the interests of the client and provide warnings. In contrast, in a DTC therapy app, there are no clear lines of accountability or associated ethical obligations to protect the user seeking mental health services. The types of DTC services that present ethical challenges include apps that use a digital platform to connect users to minimally trained nonprofessional counselors, as well as services that provide counseling steered by artificial intelligence and conversational agents. There is a need for adequate oversight of DTC nonprofessional psychotherapy services and additional empirical research to inform policy that will provide protection to the consumer. ©Nicole Martinez-Martin, Karola Kreitmair. Originally published in JMIR Mental Health (http://mental.jmir.org), 23.04.2018.

US-Russian laboratory-to-laboratory cooperation in nuclear materials protection, control, and accounting

International Nuclear Information System (INIS)

Mullen, M.; Augustson, R.; Horton, R.

1995-01-01

Under the guidance of the Department of Energy (DOE), six DOE laboratories have initiated a new program of cooperation with the Russian Federation's nuclear institutes. The purpose of the program is to accelerate progress toward a common goal shared by both the US and Russia--to reduce the risks of nuclear weapons proliferation, including such threats as theft, diversion, and unauthorized possession of nuclear materials, by strengthening systems of nuclear materials protection, control, and accounting. This new program is called the Laboratory-to-Laboratory Nuclear Materials Protection, Control, and Accounting (Lab-to-Lab MPC and A) Program. It is designed to complement other US-Russian MPC and A programs such as the government-to-government (Nunn-Lugar) programs. The Lab-to-Lab MPC and A program began in 1994 with pilot projects at two sites: Arzamas-16 and the Kurchitov Institute. This paper presents an overview of the Laboratory-to-Laboratory MPC and A Program. It describes the background and need for the program; the objectives and strategy; the participating US and Russian laboratories, institutes and enterprises; highlights of the technical work; and plans for the next several years

[Safeguards for the physical protection of nuclear materials and facilities

International Nuclear Information System (INIS)

Jones, O.E.

1975-01-01

Testimony is given on the subject of safeguards for the physical protection of nuclear materials and facilities, particularly during transportation. The ERDA nation-wide safe-secure transportation system and the Safe-Secure Trailer are described. The nationwide ERDA voice communication system is also described. Development of hardware and systems is discussed. The use of adversary simulation for evaluating protection systems is mentioned

Acceptance criteria for the physical protection upgrade rule requirements for fixed sites. Information guide

International Nuclear Information System (INIS)

Dwyer, P.

1980-09-01

This document has been developed as a tool to assist in providing consistent evaluation of upgraded physical security plans submitted in response to the Physical Protection Upgrade Rule, effective March 25, 1980. It presents a means for assuring licensee compliance with every regulatory requirement of particular significance to the protection of the public health and safety. Acceptance criteria are included to determine the extent to which each licensee meets the regulatory requirements. The format parallels Regulatory Guide 5.52, Standard Format and Content of a Licensee Physical Protection Plan for Strategic Special Nuclear Material at Fixed Sites

Foundations of radiation physics and radiation protection. 3. rev. and enl. ed.

International Nuclear Information System (INIS)

Krieger, Hanno

2009-01-01

The book under consideration comprehensively reports on the physical, biological and legal fundamentals of the radiology. The book is divided into four large sections. The first section is concerned with the physical fundamentals of the radiology, the terms of the dose as well as the computation of the dose rate in radiation fields. The second section reports on the radiobiological and epidemiological fundamentals of the radiation protection as well as on the natural and civilization radiation exposure. The third section comprehensively describes the legal and practical aspects of radiation protection. The last section contains an updated appendix of tables with the most important fundamental data for the practical radiation protection

Computerized materials protection, control, and accountability

International Nuclear Information System (INIS)

Whiteson, R.; Seitz, S.; Landry, R.P.; Hadden, M.L.; Painter, J.A.

1997-01-01

The proliferation of nuclear weapons, along with the technical knowledge and materials needed to make these weapons, is an enduring problem of international urgency. Current international nuclear nonproliferation efforts are aimed at deterring, detecting, and responding to proliferation of weapons of mass destruction. These safeguards efforts are being implemented by applying preeminent science and technology to the management and control of nuclear materials. By strengthening systems of nuclear material protection, control, and accountability (MPC and A), one can reduce the threat of nuclear weapons proliferation. Two major programs of international cooperation are now underway to achieve this goal. The first is between the US Department of Energy (DOE) and the Institutes of the Russian Federation (Laboratory-to-Laboratory Program), and the second is between the US Government and Governments of the former Soviet Republics (Government-to-Government Program). As part of these programs, the DOE is working with facilities to assist them in implementing computerized MPC and A systems. This work is a collaboration between computer scientists and safeguards experts in both the US and the new Republics. The US is making available technology and expertise to enable Russian experts to build on computerized MPC and A software developed in the US. This paper describes the joint efforts of these international teams to develop sophisticated computerized MPC and A systems using modern computer hardware and software technology. These systems are being customized to meet the site-specific needs of each facility

Convention on the physical protection of nuclear material

International Nuclear Information System (INIS)

1991-09-01

The document refers to the Convention on the Physical Protection of Nuclear Material (IAEA-INFCIRC-274). Part I contains the status list as of September 6, 1991; Part II contains the texts of reservations/declarations made upon expressing consent to be bound; Part III contains the texts of reservations/declarations made upon signature

International Physical Protection Advisory Service (IPPAS) Guidelines

International Nuclear Information System (INIS)

2014-01-01

The International Physical Protection Advisory Service (IPPAS) was established by the IAEA in 1995 and is a fundamental part of the IAEA’s efforts to assist States, upon request, to establish and maintain an effective national nuclear security regime to protect against the unauthorized removal of nuclear and other radioactive material, and against the sabotage of nuclear and other associated facilities, as well as material during transport, while recognizing that the ultimate responsibility for physical protection lies with the State. IPPAS provides peer review on implementing relevant international instruments, in particular the Convention on the Physical Protection of Nuclear Material (CPPNM), together with the 2005 Amendment, and on implementing the IAEA Nuclear Security Series of guidance publications, in particular Fundamentals and Recommendations. IPPAS missions compare (insofar as this is possible) the procedures and practices employed by a State with the obligations specified under the CPPNM and the 2005 Amendment, as well as with the existing international consensus guidelines provided in relevant IAEA Nuclear Security Series publications. Since 1996, 63 IPPAS missions have been conducted in 40 countries, including 15 follow-up missions, as well as the recent mission to the IAEA Office of Safeguards Analytical Services laboratories, in Seibersdorf. More than 140 experts from 34 Member States have participated in the conduct of IPPAS missions as IPPAS team members or team leaders. The updated IPPAS guidelines reflect a modular approach to make them more flexible and responsive to the needs of States. The modular approach is an innovation of great value, ensuring the degree of flexibility required to fit individual national contexts, practices and objectives as expressed by the requesting States. In particular, it also offers States the opportunity to expand the scope of a requested IPPAS mission to embrace its nuclear security regime for the protection of

Research on effectiveness assessment programs for physical protection system

Energy Technology Data Exchange (ETDEWEB)

Seo, Janghoon; Yoo, Hosik; Ham, Taekyu [Korea Institute of Nuclear Non-proliferation and Control, Daejeon (Korea, Republic of)

2015-05-15

PPS (Physical Protection System) is an integrated set of procedures, installation and human resources to protect valuable assets from physical attack of potential adversaries. Since nuclear facilities or radioactive materials can be attractive targets for terrorists, PPS should be installed and maintained throughout the entire lifecycle of nuclear energy systems. One of key ingredients for effective protection is a reliable assessment procedure of the PPS capability. Due to complexity of possible threat categories and pathways, several pathway analysis programs have been developed to ease analysis or visualization. ASSESS using ASD approach runs fast and adopts a relatively simple modeling process for facility elements. But uncertainty due to assumptions used in modeling might complicate the interpretation of results. On the other hand, 2D pathway program such as TESS can utilize more self-consistent detection probability and delay time since actual pathway on 2D map is available. Also, this pathway visualization helps users understand analysis result more intuitively. But, in general, 2D pathway programs require strong computational power and careful optimization. Another possible difference between two approaches is response force deployment and RFT.

Research on effectiveness assessment programs for physical protection system

International Nuclear Information System (INIS)

Seo, Janghoon; Yoo, Hosik; Ham, Taekyu

2015-01-01

PPS (Physical Protection System) is an integrated set of procedures, installation and human resources to protect valuable assets from physical attack of potential adversaries. Since nuclear facilities or radioactive materials can be attractive targets for terrorists, PPS should be installed and maintained throughout the entire lifecycle of nuclear energy systems. One of key ingredients for effective protection is a reliable assessment procedure of the PPS capability. Due to complexity of possible threat categories and pathways, several pathway analysis programs have been developed to ease analysis or visualization. ASSESS using ASD approach runs fast and adopts a relatively simple modeling process for facility elements. But uncertainty due to assumptions used in modeling might complicate the interpretation of results. On the other hand, 2D pathway program such as TESS can utilize more self-consistent detection probability and delay time since actual pathway on 2D map is available. Also, this pathway visualization helps users understand analysis result more intuitively. But, in general, 2D pathway programs require strong computational power and careful optimization. Another possible difference between two approaches is response force deployment and RFT

Criteria and application methodology of physical protection of nuclear materials within the national and regional boundaries

International Nuclear Information System (INIS)

Rodriguez, C.E.; Cesario, R.H.; Giustina, D.H.; Canibano, J.

1998-01-01

Full text: The physical protection against robbery, diversion of nuclear materials and sabotage of nuclear installations by individuals or groups, has been for long time the reason of national and international concern. Even though, the obligation to create and implement an effective physical protection system for nuclear materials and installations in the territory of a given State, fall entirely on the State's Government, whether this obligation is fulfilled or not, and if it does, in what measure or up to what extent, it also concerns the rest of the States. Therefore, physical protection has become the reason for a regional co-operation. It is evident the need of co-operation in those cases where the physical protection efficiency within the territory of a given State depends also on the appropriate measures other States are taken, specially when dealing with materials been transported through national borders. The above mentioned constitute an important framework for the regional co-operation for the physical protection of nuclear materials. For that reason, the Nuclear Regulatory Authority established criteria and conditions aimed at mitigate diversions, robberies and sabotage to nuclear installations. As a working philosophy, it was established a simplify physical protection model of application in Argentina who, through the ARCAL No. 23 project, will be extrapolated to the whole Latin-American region, concluding that the application of the appropriated physical protection systems at regional level will lead to the strengthening of it at national level. (author) [es

Physical protection: his contribution to the safety culture

International Nuclear Information System (INIS)

Rodriguez, C.E.; Cesario, R.H.; Giustina, D.H.; Canibano, J.

1998-01-01

Full text: As a contribution to the safety culture improvement, the present paper aims at raising awareness about the importance of physical protection measures and, this way, increase the commitment of those responsible for the materials or nuclear installations safety that can cause severe radiological consequences to the public. To that purpose, a brief description is made of the basic criteria used for the design of a Physical Protection System and the introduction of our own computational tool designed and developed by the Nuclear Regulatory Authority to evaluate this type of systems. Likewise, comments are made on the illicit traffic events occurred during the last years involving nuclear materials and other radioactive sources out of some States control, showing that these type of materials are easily accessible and that there are always individuals willing to selling and buying it. Even though events like these won't grant enough uranium or plutonium to fabricate a nuclear weapon, but non-stables isotope and conventional explosives could be mixed to produce a huge contamination. These reported cases had built some public concern and threatened to set a lack of trust on the control systems in use. Even though, no nuclear material diversion and equipment of nuclear interest within the nuclear installations where it is in force the AR 10.13.1 Standard -Physical Protection of Nuclear Materials and Facilities-, have been detected as of today, as a conclusion we must say that only a permanent strengthening of each link of the safety chain will allow a level of an adequate safety. This requires that the already established politics set by the safety authorities reach a high level of commitment by the individuals involved. (author) [es

Protecting Cryptographic Memory against Tampering Attack

DEFF Research Database (Denmark)

Mukherjee, Pratyay

In this dissertation we investigate the question of protecting cryptographic devices from tampering attacks. Traditional theoretical analysis of cryptographic devices is based on black-box models which do not take into account the attacks on the implementations, known as physical attacks. In prac......In this dissertation we investigate the question of protecting cryptographic devices from tampering attacks. Traditional theoretical analysis of cryptographic devices is based on black-box models which do not take into account the attacks on the implementations, known as physical attacks....... In practice such attacks can be executed easily, e.g. by heating the device, as substantiated by numerous works in the past decade. Tampering attacks are a class of such physical attacks where the attacker can change the memory/computation, gains additional (non-black-box) knowledge by interacting...... with the faulty device and then tries to break the security. Prior works show that generically approaching such problem is notoriously difficult. So, in this dissertation we attempt to solve an easier question, known as memory-tampering, where the attacker is allowed tamper only with the memory of the device...

The Russian Nuclear Material Protection, Control and Accounting Program: Analysis and prospect

International Nuclear Information System (INIS)

Kempf, C.R.

1998-01-01

This paper summarizes an analysis of the US-Russian Nuclear Material Protection, Control and Accounting (MPC and A) Program, developed on the basis of extensive discussions with US laboratory participants as well as personal experience. Results of the discussions have been organized into three main areas: Technical/MPC and A Progress; Programmatic and Administrative Issues; and Professional Aspects. Implications for MPC and A effectiveness, for MPC and A sustainability, and for future relations and collaboration are derived. Suggested next steps are given

Evaluation of road-transit physical protection systems

International Nuclear Information System (INIS)

Gallagher, R.J.; Keeton, S.C.; Stimmell, K.G.; DeLaquil, P. III.

1978-05-01

To assess the overall effectiveness of a transportation physical protection system, computer codes which simulate armed attacks have been developed and are being used to examine a range of issues associated with road transportation systems. The paper discusses the purpose and features of three of these codes, SOURCE (which simulates the initial ambush), SABRES I (which covers the battle) and BARS (which treats the penetration of protective cargo barriers). The use of these methodologies to evaluate the value of additional vehicles, guards, armor and alternative tactics or equipment as a means of improving convoy security has recently been completed. The results which are presented demonstrate that the protection offered by the present commercial regulations for guards and vehicles is probably marginal. This could be substantially increased by the addition of armor to close escort vehicles instead of just the transporter and the use of appropriate tactics. Against the baseline threat of adversaries armed with M-16's, observation and harassment from a modest distance until re-enforcements arrive appears preferable to aggressive assault by the ambushed guard force

Physical Protection System Upgrades - Optimizing for Performance and Cost

International Nuclear Information System (INIS)

Hicks, Mary Jane; Bouchard, Ann M.

1999-01-01

CPA--Cost and Performance Analysis--is an architecture that supports analysis of physical protection systems and upgrade options. ASSESS (Analytic System and Software for Evaluating Security Systems), a tool for evaluating performance of physical protection systems, currently forms the cornerstone for evaluating detection probabilities and delay times of the system. Cost and performance data are offered to the decision-maker at the systems level and to technologists at the path-element level. A new optimization engine has been attached to the CPA methodology to automate analyses of many combinations (portfolios) of technologies. That engine controls a new analysis sequencer that automatically modifies ASSESS PPS files (facility descriptions), automatically invokes ASSESS Outsider analysis and then saves results for post-processing. Users can constrain the search to an upper bound on total cost, to a lower bound on level of performance, or to include specific technologies or technology types. This process has been applied to a set of technology development proposals to identify those portfolios that provide the most improvement in physical security for the lowest cost to install, operate and maintain at a baseline facility

Assessment of physical protection systems: EVA method

International Nuclear Information System (INIS)

Bernard, J.-L.; Lamotte, C.; Jorda, A.

2001-01-01

CEA's missions in various sectors of activity such as nuclear, defence, industrial contracts and the associated regulatory requirements, make it necessary to develop a strategy in the field of physical protection. In particular, firms having nuclear materials are subject to the July 25, 1980 law no.80-572 on the protection and control of nuclear materials. A holding permit delivered by the regulatory authority is conditioned to the protection by the operator of the nuclear materials used. In France it is the nuclear operator who must demonstrate, in the form of a security study, that potential aggressors would be neutralised before they could escape with the material. To meet these requirements, we have developed methods to assess the vulnerability of our facilities. The EVA method, the French acronym for 'Evaluation de la vulnerabilite des Acces' (access vulnerability system) allows dealing with internal and external threats involving brutal actions. In scenarios relating to external threat, the intruders get past the various barriers of our protection system, attempting to steal a large volume of material in one swoop and then escape. In the case of internal threat, the goal is the same. However, as the intruder usually has access to the material in the scope of his activities, the action begins at the level of the target. Our protection system is based on in-depth defense where the intruders are detected and then delayed in their advance towards their target to allow time for intervention forces to intercept them

Analytic study for physical protection system (PPS) in nuclear power plants (NPPs)

Energy Technology Data Exchange (ETDEWEB)

Woo, Tae Ho, E-mail: thw@snu.ac.kr

2013-12-15

Highlights: • The physical protection system (PPS) is investigated. • General NPPs are modeled in the study. • Possible terror cases, likelihood, and consequence are studied. • PPS is constructed by analytical methods. - Abstract: The nuclear safeguard is analyzed in the aspect of the physical protection system (PPS) in nuclear power plants (NPPs). The PPS is reviewed and its related terror scenarios are investigated. The PPS is developed using analytical methods. In the terror scenarios, there are 8 possible cases for the terror attacks to the NPPs. Then, the likelihood of terror is classified by the general terror incidents. The consequence of terror is classified by Design Basis Threat (DBT) of the International Atomic Energy Agency (IAEA) scale. The physical protection method is suggested by defense-in-depth constraints and severe accident countermeasures. Finally, the advanced PPS is constructed, which could be used for the preparation for the possible terror attacks in the NPPs.

Catalog of physical protection equipment. Book 3: Volume VI. Automated response components

International Nuclear Information System (INIS)

Haberman, W.

1977-06-01

The Catalog of Physical Protection Equipment presents information on currently available physical protection equipment that could be employed to safeguard special nuclear materials. The primary source of information was the responses of manufacturers and vendors to requests for literature and data. All equipment listed in the Catalog has been screened in accordance with the following general criteria, and only items meeting one or more of these criteria have been included: (1) equipment is commercially available off-the-shelf; (2) equipment is currently in use at commercial nuclear facilities licensed or to be licensed by NRC; (3) equipment is applicable for use at nuclear facilities licensed or to be licensed by NRC; (4) equipment can operate in the environmental conditions present at nuclear facilities; and (5) equipment is not designed solely or primarily for residential use. The final report describes the methodology and rationale used to create the Catalog of Physical Protection Equipment

Analytic study for physical protection system (PPS) in nuclear power plants (NPPs)

International Nuclear Information System (INIS)

Woo, Tae Ho

2013-01-01

Highlights: • The physical protection system (PPS) is investigated. • General NPPs are modeled in the study. • Possible terror cases, likelihood, and consequence are studied. • PPS is constructed by analytical methods. - Abstract: The nuclear safeguard is analyzed in the aspect of the physical protection system (PPS) in nuclear power plants (NPPs). The PPS is reviewed and its related terror scenarios are investigated. The PPS is developed using analytical methods. In the terror scenarios, there are 8 possible cases for the terror attacks to the NPPs. Then, the likelihood of terror is classified by the general terror incidents. The consequence of terror is classified by Design Basis Threat (DBT) of the International Atomic Energy Agency (IAEA) scale. The physical protection method is suggested by defense-in-depth constraints and severe accident countermeasures. Finally, the advanced PPS is constructed, which could be used for the preparation for the possible terror attacks in the NPPs

Physical protection system of nuclear material in the Federal Republic of Germany

International Nuclear Information System (INIS)

Bueker, H.; Jungclaus, D.; von Eyss, H.J.; von Osten, W.

1980-01-01

The objective of physical protection, its statutory and other bases as well as the parties involved in the licensing process are described. The facilities are grouped in categories reflecting their hazard potentials: the possibility of a theft of nuclear fuels in an approach similar to INFCIRC 225 and, in addition, the possibility of a release of radioactive materials. Physical protection follows the concept of detection, alert of police force, delay, prevention of the act by police force. The schematic layout of a Category I facility is presented

Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

Energy Technology Data Exchange (ETDEWEB)

Durkee, Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Argonne National Lab. (ANL), Argonne, IL (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Miller, Mike [Argonne National Lab. (ANL), Argonne, IL (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-09-30

The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

Energy Technology Data Exchange (ETDEWEB)

Miller, Mike [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Durkee, Jr., Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-01-30

The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

Computing in radiation protection and health physics - 10 years further

International Nuclear Information System (INIS)

Behrens, R.; Greif, N.; Struwe, H.; Wissmann, F.

2008-01-01

Computing influences radiation protection and health physics more extensively as ever before. The good old data processing and main frame computing has changed towards information technology in a wider sense. Technologies and operating systems out of workplace computing have amended microprocessor technology in measuring devices. The boundaries between them are constantly in a state of flux. The use of the world wide web has become indispensable. No radiation protection expert could still manage without a workplace computer. Measuring networks, radiation protection information systems, data bases, computer simulation and other challenging applications form the image of today. (orig.)

Physical Protection of Nuclear Material and Nuclear Facilities (Implementation of INFCIRC/225/Revision 5). Implementing Guide

International Nuclear Information System (INIS)

2018-01-01

This publication is the lead Implementing Guide in a suite of guidance on implementing the Nuclear Security Recommendations on Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225/Revision 5), IAEA Nuclear Security Series No. 13. It provides guidance and suggestions to assist States and their competent authorities in establishing, strengthening and sustaining their national physical protection regime and implementing the associated systems and measures, including operators’ physical protection systems. The structure of this publication is as follows. After this introduction, Section 2 describes the objectives of physical protection and the overall approach to managing the risks of the unauthorized removal of nuclear material and the sabotage of nuclear facilities. Section 3 provides guidance for the State and its competent authorities on the physical protection elements of the nuclear security regime; this guidance is based on the fundamental principles set out in the Recommendations publication. Section 4 provides guidance on the operator’s physical protection system and describes a systematic, integrated approach. Appendix I gives an annotated outline of the typical contents of an operator’s security plan. Appendix II provides similar guidance for the contingency plan. Appendix III provides a description of nuclear material aggregation that can be used to categorize nuclear material and determine the appropriate level of protection against unauthorized removal. Appendix IV presents a table of paragraph cross-references between the Recommendations publication and this Implementing Guide.

The trend on legislation of physical protection law and the effective measures for its implementation

International Nuclear Information System (INIS)

Lee, J. W.

2002-01-01

As a part of strengthening the international regime of physical protection, the 'Legal and Technical Experts Meeting' to prepare a draft amendment of the Convention on the Physical Protection of Nuclear Material(INFCIRC/274/Rev.1) has been held under the auspices of IAEA Secretariat, based on the results of about two-year discussion related to its amendment among the Member States. In addition, terrorism of last September in the United States has made the amendment work of the Convention speed up to quickly cope with the real threat of nuclear facility, and the Diplomatic Conference for its amendment would be held at the end of this year. In order to meet these international strengthening trends and to prepare the measures against radiological emergency with the re-establishment of domestic protection system, Korean government has currently pursued to establish a comprehensive 'law for Physical Protection and Measures against Radiological Emergency' This paper suggests the consideration on domestic status of the legal system, the trend of its legislation and the effective measures for its implementation, to efficiently maintain domestic system of physical protection

Radiologic science for technologists: physics, biology, and protection

International Nuclear Information System (INIS)

Bushong, S.C.

1980-01-01

The second edition of a textbook primarily for students in radiologic technology is presented. Separate chapters discuss mammography, computed tomography, diagnostic ultrasound, and design of radiologic physics. Radiation protection is specifically presented in two chapters as well as being integrated throughout the text. The fundamentals of radiobiology, molecular and cellular effects of irradiation, and early and late radiation effects comprise four chapters

Measuring the safeguards value of material accountability

International Nuclear Information System (INIS)

Sicherman, A.

1988-01-01

Material accountability (MA) activities focus on providing after-the-fact indication of diversion or theft of special nuclear material (SNM). MA activities include maintaining records for tracking nuclear material and conducting periodic inventories and audits to ensure that loss has not occurred. This paper presents a value model concept for assessing the safeguards benefits of MA activities and for comparing these benefits to those provided by physical protection (PP) and material control (MC) components. The model considers various benefits of MA, which include: 1) providing information to assist in recovery of missing material, 2) providing assurance that physical protection and material control systems have been working, 3) defeating protracted theft attempts, and 4) properly resolving causes of and responding appropriately to anomalies of missing material and external alarms (e.g., hoax). Such a value model can aid decision-makers in allocating safeguards resources among PP, MC, and MA systems

The system of physical protection of nuclear materials in the Republic of Belarus: problems and solutions

International Nuclear Information System (INIS)

Piotukh, V.

2002-01-01

Full text: It is a matter of common knowledge, that the responsibility for establishing and operating a comprehensive physical protection system for nuclear material and facilities within a state shall rest entirely with the Government of that state. In Belarus all nuclear materials, including HEU, are located at the Center of Nuclear Technologies of the Belarus National Academy of Sciences 'Sosny'. Through regulatory resolution on measures for physical protection of nuclear materials issued by the Council of Ministers of the Republic of Belarus in 1993, the committee for Supervision of Industrial and Nuclear Safety (Promatomnadzor) was appointed as the authority responsible for ensuring physical protection of nuclear materials and facilities and was tasked to develop and approve relevant normative documents. In 1994 Promatomnadzor issued the order on ensuring physical protection of nuclear materials during use, storage and transportation that was in line with then relevant IAEA recommendations. Since September 2001 Promatomnadzor has been a department of the Ministry for Emergencies of the Republic of Belarus. The system of physical protection at 'Sosny' includes elements of the 'old' system set up in 1984, and the 'new' one installed in 1996 as a result of a multilateral co-operative effort between Belarus, Sweden, Japan and USA. The main technical components of the system are: detection system including magnetic, microwave and infrared sensors; video-surveillance system; system of access delay including electronic blocking devices; system of authorized access including magnetic cards; system of computerized control over all components and communication system. Discussions between potential donor states are taking place regarding various security upgrades, particularly to the protected area where main security sensitive buildings are located. In 2000 Promatomnadzor requested an international physical protection advisory service (IPPAS) mission from the IAEA. The

Resilience in Physically Abused Children: Protective Factors for Aggression

Directory of Open Access Journals (Sweden)

Megan R. Holmes

2015-04-01

Full Text Available Aggression continues to be a serious problem among children, especially those children who have experienced adverse life events such as maltreatment. However, there are many maltreated children who show resilient functioning. This study investigated potential protective factors (i.e., child prosocial skills, child internalizing well-being, and caregiver well-being that promoted positive adaptation and increased the likelihood of a child engaging in the healthy, normative range of aggressive behavior, despite experiencing physical maltreatment. Logistic regression analyses were conducted using two waves of data from the National Survey of Child and Adolescent Well-Being (NSCAW-I. Children who were physically maltreated were more likely to exhibit clinical levels of aggressive behavior at Time 1 than children who were not physically maltreated. Children’s internalizing well-being, children’s prosocial behavior, and caregivers’ well-being were associated with lower likelihood of clinical levels of aggressive behavior at Time 1. Children’s internalizing well-being and children’s prosocial behavior remained significantly associated with nonclinical aggression 18 months later. These findings highlight the role of protective factors in fostering positive and adaptive behaviors in maltreated children. Interventions focusing on preventing early aggression and reinforcing child prosocial skills, child internalizing well-being, and caregiver well-being may be promising in promoting healthy positive behavioral adjustment.

Resilience in physically abused children: protective factors for aggression.

Science.gov (United States)

Holmes, Megan R; Yoon, Susan; Voith, Laura A; Kobulsky, Julia M; Steigerwald, Stacey

2015-04-27

Aggression continues to be a serious problem among children, especially those children who have experienced adverse life events such as maltreatment. However, there are many maltreated children who show resilient functioning. This study investigated potential protective factors (i.e., child prosocial skills, child internalizing well-being, and caregiver well-being) that promoted positive adaptation and increased the likelihood of a child engaging in the healthy, normative range of aggressive behavior, despite experiencing physical maltreatment. Logistic regression analyses were conducted using two waves of data from the National Survey of Child and Adolescent Well-Being (NSCAW-I). Children who were physically maltreated were more likely to exhibit clinical levels of aggressive behavior at Time 1 than children who were not physically maltreated. Children's internalizing well-being, children's prosocial behavior, and caregivers' well-being were associated with lower likelihood of clinical levels of aggressive behavior at Time 1. Children's internalizing well-being and children's prosocial behavior remained significantly associated with nonclinical aggression 18 months later. These findings highlight the role of protective factors in fostering positive and adaptive behaviors in maltreated children. Interventions focusing on preventing early aggression and reinforcing child prosocial skills, child internalizing well-being, and caregiver well-being may be promising in promoting healthy positive behavioral adjustment.

Legal Aspects of international cooperation in the physical protection of nuclear facilities and materials

International Nuclear Information System (INIS)

Herron, L.W.

1981-10-01

This paper provides a detailed analysis of developments in the number field having led the IAEA to promote international cooperation in ensuring adequate physical protection of nuclear facilities and materials. This work resulted in the establishment of recommendations and guidelines in this respect and culminated in the development of the 1980 Convention on the Physical Protection of Nuclear Materials. (NEA) [fr

Convention on the physical protection of nuclear material

International Nuclear Information System (INIS)

1990-08-01

The document refers to the Convention on the Physical Protection of Nuclear Material (INFCIRC/274). Part I contains reservations/declarations made upon or following signature and Part II contains reservations/declarations made upon or following deposit of instrument of consent to be bound. The status of signature, ratification, acceptance, approval or accession by States or organizations as of 31 July 1990 is presented in an attachment

Reinforcing the protection against ionizing radiation in medical uses through following the progress in modern medical physics

International Nuclear Information System (INIS)

Zheng Junzheng; Li Junli

2008-01-01

The medical application of ionizing radiation has the longest history, the most extensive uses and the strongest effect among the multiple applications of ionizing radiation technology. With the development of diagnostic radiology and radiotherapy, for instances, the radiology, the interventional radiology, the nuclear medicine, and the radiation oncology; the infrastructures and teambuilding of medical physics in China has been becoming more and more important and urgent. Fortunately, people in relevant fields have already recognized this situation and made lots of progresses in the recent years, for example, the 221 st Xiangshan Science Conference took 'The Development of Medical Physics' as its main topic in 2004; in recent years, a series of regulations and national standards regarding to the quality assurance and radiological protection of medical exposure and the teambuilding of the relevant departments in hospital have been successively issued; the subject of Medical Physics was opened as both undergraduate and graduated courses in more and more universities (Tsinghua University, Peking University etc); the Committee on Medical Physics was enrolled as a new member of the Chinese Physical Society. Modern medical physics should include 4 parts, medical imaging physics, nuclear medicine physics, radiation oncology physics, and health physics. Protection against ionizing radiation needs to fully cover the development of medical physics, which includes the protection against ianizing radiation in medical uses. This article emphasizes the improvement of the ionizing radiation protection in medical uses, for marking of 30th anniversary of the Journal of Radiation Protection. (authors)

Physical limitations of semiconductor devices defects, reliability and esd protection

CERN Document Server

Vashchenko, V A

2008-01-01

Provides an important link between the theoretical knowledge in the field of non-linier physics and practical application problems in microelectronics. This title focuses on power semiconductor devices and self-triggering pulsed power devices for ESD protection clamps.

PHYSICAL CAPITAL, HUMAN AND SOCIAL AND RESPONSIBILITY PUBLIC ACCOUNTANT WITH POVERTY

OpenAIRE

Wong Torres, Zelma; Salcedo Guzmán, Luisa Elena

2014-01-01

This article is the result of research carried out in 2010, entitled, physical capital, human and social, and social responsibility of the Certified Public Accountant with Poverty. This article seeks to demonstrate the interest in settlement mechanisms to achieve equity and achieve a development strategy. In this perspective, the article insisted that social policy should be able to influence the structural determinants through which reproduce poverty and inequality, maldistribution of educat...

Introduction and user's information for the fixed site physical protection upgrade rule guidance compendium

International Nuclear Information System (INIS)

Evans, L.J. Jr.; Allen, T.

1980-06-01

Licensees at fixed sites who possess, use, process, or handle strategic special nuclear material are required to design a physical security system to protect this material. This report suggests an orderly process for using guidance, with special emphasis on two regulatory guides and two NUREG series documents that comprise a compendium, to aid in the design of a physical security system that meets the requirements of the final Physical Protection Upgrade Rule. The rule was published November 28, 1979 (44 FR 68184), and became effective March 25, 1980

Use of the project management methodology to establish physical protection system at nuclear facility

International Nuclear Information System (INIS)

Gramotkin, F.; Kuzmyak, I.; Kravtsov, V.

2015-01-01

The paper considers the possibility of using the project management methodology developed by the Project Management Institute (USA) in nuclear security in terms of modernization or development of physical protection system at nuclear facility. It was demonstrated that this methodology allows competent and flexible management of the projects on physical protection, ensuring effective control of their timely implementation in compliance with the planned budget and quality

Ukraine-Japanese-Swedish project: Upgrading of perimeter protection system at Kharkov Institute of Physics and Technology (KIPT)

International Nuclear Information System (INIS)

Mikahaylov, V.; Lapshin, V.; Ek, P.; Flyghed, L.; Nilsson, A.; Ooka, N.; Shimizu, K.; Tanuma, K.

2001-01-01

Full text: Since the Ukraine voluntarily accepted the status of a non-nuclear-weapons state and concluded a Safeguards Agreement with the IAEA, the Kharkov Institute of Physics and Technology (KIPT) as a nuclear facility using the nuclear material of category 1, has become a Ukrainian priority object for the international community's efforts to ensure nuclear non-proliferation measures and to bring the existing protection systems to the generally accepted security standards. In March 1996, at the meeting held under the auspices of the IAEA in Kiev, the representatives from Japan, Sweden and the USA agreed to provide technical assistance concerning improvement of the nuclear material accountancy and control and physical protection system (MPC and A) available at KIPT. The Technical Secretariat of the Japan-Ukraine Committee for Co-operation on Reducing Nuclear Weapons and Swedish Nuclear Power Inspectorate undertook to solve the most expensive and labour-consuming task namely, the upgrading of the perimeter protection system at KIPT. This included that the current perimeter system, comprising several kilometers, should be completely replaced. Besides the above-mentioned problem, the upgrading should be carried out with the institute in operation. Thus, it was not allowed to replace the existing protection system by a new one unless KIPT was constantly protected. This required the creation of a new protected zone that to a large extent was occupied by the communication equipment, buildings, trees and other objects interfering with the work. All these difficulties required very comprehensive development of the project design as well as a great deal of flexibility during the implementation of the project. These problems were all successfully resolved thanks to a well working project organization, composed of experts from KIPT, JAERI and ANS, involving the highly qualified Swedish technical experts who played a leading role. In the framework of implementation of the

An alternative format for Category I fuel cycle facility physical protection plans

International Nuclear Information System (INIS)

Dwyer, P.A.

1992-06-01

This document provides an alternative format for physical protection plans designed to meet the requirements of Title 10 of the Code of Federal Regulations, Sections 73.20, 73.45, and 73.46. These requirements apply to licensees who operate Category I fuel cycle facilities. Such licensees are authorized to use or possess a formula quantity of strategic special nuclear material. The format described is an alternative to that found under Regulatory Guide 5.52, Rev. 2 ''Standard Format and Content of a Licensee Physical Protection Plan for Strategic Special Nuclear Material at Fixed Sites (Other than Nuclear Power Plants).''

10 CFR 73.26 - Transportation physical protection systems, subsystems, components, and procedures.

Science.gov (United States)

2010-01-01

... PROTECTION OF PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.26... of deadly force when armed escorts or armed response personnel have a reasonable belief that it is... at least one level higher than that having responsibility for the day-to-day plant operation. These...

Sandia Laboratories plutonium protection system

International Nuclear Information System (INIS)

Bernard, E.A.; Miyoshi, D.S.; Gutierrez, F.D.

1977-01-01

Sandia Laboratories is developing an improved plutonium protection system (PPS) to demonstrate new concepts for enhancing special nuclear materials safeguards. PPS concepts include separation of functions, real-time item accountability and improved means for control of materials, activities and personnel access. Physical barriers and a secure communications network are designed into the system to offer greater protection against sabotage, diversion and theft attempts. Prototype systems are being constructed at Hanford, Washington and Albuquerque, New Mexico and will be subjected to a comprehensive testing and evaluation program

Convention on the physical protection of nuclear materials

International Nuclear Information System (INIS)

1997-01-01

The document refers to the Convention on the Physical Protection of Nuclear Material (IAEA-INFCIRC-274), including in Part I the status list of signature, ratification, acceptance, approval, accession or succession by States or organizations as of 31 December 1996, in Part II the texts of reservations/declarations made upon or following expressing consent to be bound, and in Part III the texts of reservations/declarations made upon signature

Convention on the physical protection of nuclear material

International Nuclear Information System (INIS)

1982-01-01

The document presents the original draft for a Convention on the Physical Protection of Nuclear Material, full reports of all the discussions held by representatives of Member States at meetings called by the IAEA, texts of written comments provided by Member States and the final agreed text of the Convention, list of original signatory States and status of the list of signatory States at the date of publication

Does physical activity protect against drug abuse vulnerability?

Science.gov (United States)

Bardo, Michael T; Compton, Wilson M

2015-08-01

The current review examined recent literature to determine our state of knowledge about the potential ability of physical activity serve as a protectant against drug abuse vulnerability. Both preclinical and clinical studies were examined using either associational or random assignment study designs. In addition to examining drug use as an outcome variable, the potential neural mediators linking physical activity and drug abuse vulnerability were examined. Several important conclusions may be drawn. First, the preclinical evidence is solid in showing that physical activity in various forms is able to serve as both a preventive and treatment intervention that reduces drug use, although voluntary alcohol drinking appears to be an exception to this conclusion. Second, the clinical evidence provides some evidence, albeit mixed, to suggest a beneficial effect of physical activity on tobacco dependent individuals. In contrast, there exists only circumstantial evidence that physical activity may reduce use of drugs other than nicotine, and there is essentially no solid information from random control studies to know if physical activity may prevent initiation of problem use. Finally, both preclinical and clinical evidence shows that various brain systems are altered by physical activity, with the medial prefrontal cortex (mPFC) serving as one potential node that may mediate the putative link between physical activity and drug abuse vulnerability. It is concluded that novel neurobehavioral approaches taking advantage of novel techniques for assessing the physiological impact of physical activity are needed and can be used to inform the longitudinal random control studies that will answer definitively the question posed. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Class notes from the first international training course on the physical protection of nuclear facilities and materials

Energy Technology Data Exchange (ETDEWEB)

Herrington, P.B. (ed.)

1979-05-01

The International Training Course on Physical Protection of Nuclear Facilities and Materials was intended for representatives from the developing countries who are responsible for preparing regulations and designing and assessing physical protection systems. The first part of the course consists of lectures on the objectives, organizational characteristics, and licensing and regulations requirements of a state system of physical protection. Since the participants may have little experience in nuclear energy, background information is provided on the topics of nuclear materials, radiation hazards, reactor systems, and reactor operations. Transportation of nuclear materials is addressed and emphasis is placed on regulations. Included in these discussions are presentations by guest speakers from countries outside the United States of America who present their countries' threat to nuclear facilities. Effectiveness evaluation methodology is introduced to the participants by means of instructions which teach them how to use logic trees and the EASI (Estimate of Adversary Sequence Interruption) program. The following elements of a physical protection system are discussed: barriers, protective force, intrusion detection systems, communications, and entry-control systems. Total systems concepts of physical protection system design are emphasized throughout the course. Costs, manpower/technology trade-offs, and other practical considerations are discussed. Approximately one-third of the course is devoted to practical exercises during which the attendees participatein problem solving. A hypothetical nuclear facility is introduced, and the attendees participate in the conceptual design of a physical protection system for the facility.

Class notes from the first international training course on the physical protection of nuclear facilities and materials

International Nuclear Information System (INIS)

Herrington, P.B.

1979-05-01

The International Training Course on Physical Protection of Nuclear Facilities and Materials was intended for representatives from the developing countries who are responsible for preparing regulations and designing and assessing physical protection systems. The first part of the course consists of lectures on the objectives, organizational characteristics, and licensing and regulations requirements of a state system of physical protection. Since the participants may have little experience in nuclear energy, background information is provided on the topics of nuclear materials, radiation hazards, reactor systems, and reactor operations. Transportation of nuclear materials is addressed and emphasis is placed on regulations. Included in these discussions are presentations by guest speakers from countries outside the United States of America who present their countries' threat to nuclear facilities. Effectiveness evaluation methodology is introduced to the participants by means of instructions which teach them how to use logic trees and the EASI (Estimate of Adversary Sequence Interruption) program. The following elements of a physical protection system are discussed: barriers, protective force, intrusion detection systems, communications, and entry-control systems. Total systems concepts of physical protection system design are emphasized throughout the course. Costs, manpower/technology trade-offs, and other practical considerations are discussed. Approximately one-third of the course is devoted to practical exercises during which the attendees participatein problem solving. A hypothetical nuclear facility is introduced, and the attendees participate in the conceptual design of a physical protection system for the facility

First Glossary of Modern Physics and Ionising Radiation Protection in Croatian

International Nuclear Information System (INIS)

Nodilo, M.; Petkovic, T.

2011-01-01

Motivation and encouragement for the Glossary were given as the research theme for the joint seminar between the Faculty of Electrical Engineering and Computing and Rudjer Boskovic Institute, within a postgraduate course subject ''Detectors and electronic instrumentation for particle physics''. A basic motivation is due to a lack of specialized literature in Croatian language in the field of protection of ionising radiation as well as the incompleteness of Croatian terminology in the same field. That is a general problem all over the World because the most glossaries are usually connected either with nuclear power plants or with an application of ionising radiation in medicine. On the other hand, a necessity for the specialized literature for radiation protection which follows a development of modern particle physics and its detection technique is rapidly growing up. A work and development on the Glossary were faced with serious difficulties, since various translations of foreign words and acronyms have already been used by various authors in Croatian literature. Different interpretations of the same term or concept, from diverse sources, had to be very often reconciled. However, the biggest challenge was finding proper Croatian words for the foreign terms, concepts, properties, and quantities which have not yet been commonly used so far in Croatian papers or/and Croatian legislative acts. According to our knowledge this seems to be the first comprehensive Glossary, describing the field of ionising radiation protection and bringing of 300 related entries (terms and guidelines). That is, certainly, the first characteristic Thesaurus in Croatian which includes background of modern physics and chemistry, particle phenomenology and its measurement, all dedicated to the radiological protection of workers, environment and people of the World. A Glossary brings a wide spectrum of terms of broad area of chemistry, radiation protection, nuclear and particle physics. A

Implementation of physical protection of nuclear material in Yugoslavia and Slovenia - recent and planned activities

International Nuclear Information System (INIS)

Pesic, M.; Nikolic, A.; Nikoli, D.; Stegnar, P.

2002-01-01

Full text: In more than ten last years region of South-Europe, especially countries originated from previous the Socialistic Federal Republics of Yugoslavia, are involved or surrounded, at least, by various conflicts including wars of different intensities. These unfavorable environment conditions have put additional focus at nuclear material kept in various institutions in the region. Following the IAEA recommendation on straighten the physical protection of nuclear material various actions are done or planned in the Yugoslavia and Slovenia to increase level of physical protection of nuclear material during its different usage and storage. Especial attention is drawn to update the administration rules, education of the involved personnel and redundancy of different physical protection modes of protection to prevent thieves and smuggling of nuclear material in the country or at country borders. The financial and experts help were offered by the IAEA at low level scale to Yugoslavia in 1996/97 to increase the physical protection of the fresh high-enriched uranium fuel stored and controlled regularly by the inspectors of the safeguard department of the IAEA. The further help and financial support is expected from the IAEA and relevant EU organization in aim to tighter the country borders to prevent the illegal traffic of nuclear material through the Europe. (author)

New approach to safeguards accounting

International Nuclear Information System (INIS)

Pike, D.H.; Morrison, G.W.

1977-03-01

In recent years there has been widespread concern over the problem of nuclear safeguards. Due to the proliferation of nuclear reactors throughout the world, the concern about the loss or diversion of nuclear materials at various points in the fuel cycle has greatly increased. To minimize the possibility of material loss, the nuclear industry relies on physical protection systems and materials accountability procedures at licensed facilities. Present techniques of material accountability rely on double-entry accounting systems. For various reasons, only noisy observations of on-hand inventory are available. Hence one is forced to use statistical techniques in an attempt to detect the existence of missing material. Current practice is to use control charts as the basis for detecting significant material losses. Control charts may aid in detecting large material losses but are insensitive to small quantities of material loss, even if these small losses occur repeatedly over a long period of time. The purpose of this research is to show the feasibility of using linear state estimation theory in nuclear material accountability. The Kalman Filter is used as the state estimation technique. The state vector which consists of on-hand inventory and material losses is estimated recursively

Summary of physical protection and material accounting

International Nuclear Information System (INIS)

Koppel, P.J.

1977-01-01

The tremendous growth in safeguards and security requirements for activities involving strategic quantities of high enriched uranium and plutonium has resulted in a wealth of proposed regulations, counter proposals, interim plans, license conditions, and final regulations. This paper reviews the actions taken and indicates their impact on facilities handling special nuclear material

Standard format and content of a licensee physical protection plan for strategic special nuclear material in transit - April 1980

International Nuclear Information System (INIS)

Anon.

1981-01-01

A predetermined plan to respond to safeguards contingency events is required to be prepared, based on personnel and other physical protection resources described in the Physical Protection Plan for strategic special nuclear material (SSNM) in transit. Specific requirements for the contingency plan are provided in Appendix C. Licensee Safeguards Contingency Plans, to 10 CFR Part 73. Regulatory Guide 5.56, Standard Format and Content of Safeguards Contingency Plans for Transportation, provides guidance for the preparation of transportation contingency plans. Licensee is reminded that all three submissions - the Physical Protection Plan, the Physical Protection Arrangements for Specific Shipments, and the Safeguards Contingency Plan - together describe the system for physical protection of each particular shipment. They should be developed and maintained to be completely consistent with each other for each shipment

Nuclear material accountancy for and control of in Czech and Slovak Federal Republic

International Nuclear Information System (INIS)

Hladik, I.

1991-01-01

The Czechoslovak State System of Accounting for and Control of (SSAC) is described. It is discussed the organizational chart and role of the Czechoslovak Atomic Energy Commission as the State Authority in the Safeguards as well as its functions in the related fields (nuclear safety, physical protection) are mentioned. The individual nuclear facilities from the nuclear material accountancy point of view are shortly described and the necessity of well functioned facility level accountancy system is expressed. The cooperation between the SSAC and IAEA is mentioned and experience gained is briefly summarized

The Physical Protection of Nuclear Material; Proteccion Fisica Delos Materiales Nucleares

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-09-15

Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international cooperation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and materials, particularly when such materials are transported across national frontiers [French] La proteccion fisica contra el robo o la desviacion no autorizada de materiales nucleares y contra el sabotaje de las instalaciones nucleares por parte de individuos o de grupos ha sido durante largo tiempo motivo de preocupacion nacional e internacional. Aunque la obligacion de crear y hacer funcionar un sistema completo de proteccion fisica para las instalaciones y materiales nucleares en el territorio de un Estado determinado incumbe enteramente al Gobierno de dicho Estado, el que esa obligacion se cumpla o no, y si se cumple, en que medida o hasta que punto, es cosa que no deja indiferentes a los demas Estados. De aqui que la proteccion fisica se haya convertido en motivo de interes y cooperacion internacional. La necesidad de cooperacion internacional se hace evidente en los casos en que la eficacia de la proteccion fisica en el territorio de un Estado depende de que otros Estados tomen tambien medidas apropiadas para evitar o hacer fracasar los actos hostiles dirigidos contra instalaciones y

U.S. national nuclear material control and accounting system

International Nuclear Information System (INIS)

Taylor, S; Terentiev, V G

1998-01-01

Issues related to nuclear material control and accounting and illegal dealing in these materials were discussed at the April 19--20, 1996 Moscow summit meeting (G7 + Russia). The declaration from this meeting reaffirmed that governments are responsible for the safety of all nuclear materials in their possession and for the effectiveness of the national control and accounting system for these materials. The Russian delegation at this meeting stated that ''the creation of a nuclear materials accounting, control, and physical protection system has become a government priority''. Therefore, in order to create a government nuclear material control and accounting system for the Russian Federation, it is critical to study the structure, operating principles, and regulations supporting the control and accounting of nuclear materials in the national systems of nuclear powers. In particular, Russian specialists have a definite interest in learning about the National Nuclear Material Control and Accounting System of the US, which has been operating successfully as an automated system since 1968

Nuclear Security Recommendations on Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225/Revision 5): Recommendations

International Nuclear Information System (INIS)

2011-01-01

This publication, Revision 5 of Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225), is intended to provide guidance to States and their competent authorities on how to develop or enhance, implement and maintain a physical protection regime for nuclear material and nuclear facilities, through the establishment or improvement of their capabilities to implement legislative and regulatory programmes. The recommendations presented in this publication reflect a broad consensus among IAEA Member States on the requirements which should be met for the physical protection of nuclear materials and nuclear facilities.

Manual of use and accounting of radioactive material and procedures of radiological protection for nuclear medicine

International Nuclear Information System (INIS)

Chavez, Miguel

1997-03-01

This manual of use and accounting of material radioactive and procedures of radiological safety tries to facilitate workings of protection of material radioactive in services of medicine nuclear, during diagnosis (examinations with x-rays, or those that are made in nuclear medicine), or during the processing of diseases, mainly of the carcinomas (x-ray)

Physical, chemical, and biological properties of radiocerium relevant to radiation protection guidelines

International Nuclear Information System (INIS)

Anon.

1978-01-01

Present knowledge of the relevant physical, chemical, and biological properties of radiocerium as a basis for establishing radiation protection guidelines is summarized. The first section of the report reviews the chemical and physical properties of radiocerium relative to the biological behavior of internally-deposited cerium and other lanthanides. The second section of the report gives the sources of radiocerium in the environment and the pathways to man. The third section of the report describes the metabolic fate of cerium in several mammalian species as a basis for predicting its metabolic fate in man. The fourth section of the report considers the biomedical effects of radiocerium in light of extensive animal experimentation. The last two sections of the report describe the history of radiation protection guidelines for radiocerium and summarize data required for evaluating the adequacy of current radiation protection guidelines. Each section begins with a summary of the most important findings that follow

40 CFR 73.37 - Account error.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Account error. 73.37 Section 73.37 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) SULFUR DIOXIDE ALLOWANCE SYSTEM Allowance Tracking System § 73.37 Account error. The Administrator may, at his or her sole...

Short-Range-Order Mineral Physical Protection On Black Carbon Stabilization

Science.gov (United States)

Liang, B.; Weng, Y. T.; Wang, C. C.; Song, Y. F.; Lehmann, J.; Wang, C. H.

2015-12-01

Soil organic matter is one of the largest reservoirs in global carbon cycle, and black carbon (BC) represents a chemical resistant component. Black C plays an important role in global climate change. Generally considered recalcitrant due to high aromaticity, the reactive surface and functional groups of BC are crucial for carbon sequestration in soils. Mineral sorption and physical protection is an important mechanism for BC long term stabilization and sequestration in environments. Previous studies on mineral protection of BC were limited to analysis techniques in two-dimensions, for example, by SEM, TEM, and NanoSIMS. Little is known about the scope of organo-mineral association, the in-situ distribution and forms of minerals, and the ultimate interplay of BC and minerals. The aim of this study is to investigate the three-dimensional interaction of organic C and minerals in submicron scale using synchrotron-based Transmission X-ray Microcopy (TXM) and Fourier-Transform Infrared Spectroscopy (FTIR). Abundant poorly-crystallined nano-minerals particles were observed. These short-range-order (SRO) minerals also aggregate into clusters and sheets, and form envelops-like structures on the surface of BC. On top of large surface contact area, the intimate interplay between BC and minerals reinforces the stability of both organic C and minerals, resulting from chemical bonding through cation bridging and ligand exchange. The mineral protection enhances BC stabilization and sequestration and lowers its bioavailability in environment. The results suggest that mineral physical protection for BC sequestration may be more important than previous understanding.

Implementation of the G8GP program on physical protection - experiences and results

International Nuclear Information System (INIS)

Hagemann, A.

2006-01-01

At the Kananaskis Summit in June 2002, G8 Leaders launched the Global Partnership against the Spread of Weapons and Materials of Mass Destruction committing to support projects to issues of non-proliferation, disarmament, counter terrorism and nuclear safety in Russia. Since then progress has been made in implementing projects. The German Federal Foreign Office contracted GRS to implement a program for improving the physical protection of nuclear or highly radioactive materials of relevance at facilities in the Russian Federation. This paper reports about this G8GP Program on physical protection, its implementation, gained experiences, current achievements and results. (author)

Preliminary assessment on the differences of nuclear terrorism convention from the convention on the physical protection of nuclear material and amendment to the convention on the physical protection of nuclear material

International Nuclear Information System (INIS)

Midiana Ariethia; Muhamad Ilman A A; Mas Pungky Hendrawijaya

2011-01-01

The threat of acts of nuclear terrorism in all its forms and manifestations create the urgent need to enhance international cooperation between countries in designing and following practical and effective measures for the prevention of acts of terrorism and to counter and punish its offenders. Several United Nations Security Council Resolutions, such as UNSCR Number 1373 (2001), and UNSCR Number 1540 (2005), and the result of Nuclear Security Summit in 2010 that encourage the member countries of IAEA to ratify nuclear conventions as soon as possible, are the reasons that the Indonesian Government planning on ratifying The International Convention for The Suppression of Acts of Nuclear Terrorism (Nuclear Terrorism Convention). Nuclear Terrorism Convention is one of the 16 (sixteen) international instruments that must be ratified by the member countries of IAEA. Of the 16 (sixteen) international instruments, 3 (three) conventions are related to nuclear; Convention on the Physical Protection of Nuclear Material, Amendment to the Convention on the Physical Protection of Nuclear Material, dan Nuclear Terrorism Convention. This paper presents the preliminary assessment on the differences of Nuclear Terrorism Convention to The Convention on The Physical Protection of Nuclear Material and Amendment to The Convention on The Physical Protection of Nuclear Material. This assessment is important due to the plan of the Indonesian Government to ratify the Nuclear Terrorism Convention. The result of this assessment could be used by BAPETEN in the ratification process of the Nuclear Terrorism Convention. The method used in this assessment is references assessment. (author)

Implementation of the learning problems of physics-based medical and radiation protection in a medical school

International Nuclear Information System (INIS)

Munoz Montplet, C.; Casas Curto, J. D.; Pedraza Gutierrez, S.; Vilanova Busquets, J. C.; Balliu Collgros, E.; Barcelo Obregon, J.; Fuentes Raspall, R.; Guirao Marin, S.; Maroto Genover, A.; Pont Valles, J.; Agramunt Chaler, S.; Jurado Bruggeman, D.

2013-01-01

The learning objectives related to medical physics and radiation protection work mostly in the module of Radiology and physical medicine of the second year of the curriculum, complemented by a visit to medical physics and radiation protection and radiation oncology at the Hospital services University of reference during the third course. In this paper we present our experience in the design and implementation during the period 2009-2012 of the module focusing in these disciplines. (Author)

INTEGRATION OF GREEN ACCOUNTING INTO ROMANIAN ACCOUNTING SYSTEM

OpenAIRE

Mihaela Ungureanu

2012-01-01

The aim of this paper is to present the concept of green accounting, its emergence at an international level, its entry in the Romanian economic environment and, especially, the way it is understood and applied in Romania. It seeks the awareness of managers and accounting professionals on this issue, especially in the context of growing pressure for environmental protection, from the general public, media and investors. An essential role is held by the accounting profession and its relevant l...

Sandia's experience in designing and implementing integrated high security physical protection systems

International Nuclear Information System (INIS)

Caskey, D.L.

1986-01-01

As DOE's lead laboratory for physical security, Sandia National Laboratories has had a major physical security program for over ten years. Activities have ranged from component development and evaluation, to full scale system design and implementation. This paper presents some of the lessons learned in designing and implementing state-of-the-art high security physical protection systems for a number of government facilities. A generic system design is discussed for illustration purposes. Sandia efforts to transfer technology to industry are described

Managing water to protect fish: A review of California's environmental water account, 2001-2005

Science.gov (United States)

Brown, L.R.; Kimmerer, W.; Brown, R.

2009-01-01

The Sacramento-San Joaquin Delta, the landward reach of the San Francisco Estuary, provides habitat for threatened delta smelt, endangered winter-run Chinook salmon, and other species of concern. It is also the location of huge freshwater diversion facilities that entrain large numbers of fish. Reducing the entrainment of listed fishes into these facilities has required curtailment of pumping, reducing the reliability of water deliveries. We reviewed the first 5 years (2001-2005) of the Environmental Water Account (EWA), a program instituted to resolve conflicts between protecting listed fishes and providing a reliable water supply. The EWA provided fishery agencies with control over 0.2-0.4 km3 of water to be used for fish protection at no cost to users of exported water, and fish agencies guaranteed no disruption of water supply for fish protection. The EWA was successful in reducing uncertainty in water supply; however, its contribution to the recovery of listed fishes was unclear. We estimated the effectiveness of the EWA to be modest, increasing the survival of winter-run Chinook salmon by 0-6% (dependent on prescreen mortality), adult delta smelt by 0-1%, and juvenile delta smelt by 2-4%. Allocating EWA water for a single life stage of one species could provide larger gains in survival. An optimally allocated EWA of equal size to the median of the first 5 years could increase abundance of juvenile delta smelt up to 7% in the springs of dry years. If the EWA is to become a long-term program, estimates of efficacy should be refined. If the program is to be held accountable for quantitative increases in fish populations, it will be necessary to integrate scientific, possibly experimental, approaches. ?? 2008 Springer Science+Business Media, LLC.

Guidance and considerations for implementation of INFCIRC/225/Rev.3, the physical protection of nuclear material

International Nuclear Information System (INIS)

1997-09-01

The Physical Protection of Nuclear Material, INFCIRC/225/Rev.3, provides recommendations for the physical protection of nuclear material against theft in use, storage and transport, whether national or international and whether peaceful or military, and contains provisions relating to the sabotage of nuclear material or facilities. The recommendations contained in INFCIRC/225/Rev.3 detail the elements that should be included in a State's system of physical protection. It also recognizes the adverse health and safety consequences arising from the theft of nuclear material and the sabotage of nuclear material or facilities. Most industrial and developing countries use these recommendations to some extent in the establishment and operation of their physical protection systems. Although INFCIRC/225/Rev.3 provides recommendations for protecting materials and facilities from theft or sabotage, it does not provide in-depth details for these recommendations. In June 1996, the IAEA convened a consultants meeting to consider this matter. This report is the result of continuing discussions and drafts over a period of nine months. The intent of this guidance is to provide a broader basis for relevant State organizations to prescribe appropriate requirements for the use of nuclear materials which are compatible with accepted international practice

Physics contributions to radiation protection in nuclear power plants

International Nuclear Information System (INIS)

Krueger, F.W.

1980-01-01

Physical research and physical methods can essentially contribute to radiation protection in nuclear power plants. With their aid, properties of radiation sources can be determined, and calculations of radiation shields can be performed. In the present paper, such tasks are analyzed, the state of the art of their solution is evaluated, and trends of further work are shown. Focal points of the present study are the calculation of properties of radiation sources outside the reactor (fission products, activated corrosion products, decontamination facilities for contaminated media), exact and engineering methods for calculating radiation fields also in inhomogeneous shields, and classification of concretes for gamma-ray shielding. Objectives, possibilities, and problems of standardization of such activities are discussed. (author)

Regulatory problems relating to physical protection of nuclear plants and materials in Italy

International Nuclear Information System (INIS)

Nocera, F.

1981-10-01

Although the questions raised by physical protection have an international charater, it is important to know of national regulations in that field since exchange of information and study of common problems help to achieve satisfactory results. This paper analyses the Italian situation, by illustrating legislative and administrative actions undertaken as well as the practices adopted in Italy to meet problems of prevention of malevolent acts against nuclear installations and substances, until such time an Act is passed in this respect. Finally, the author is in favour of the 1980 Convention of Physical Protection of Nuclear Material being ratified soon by a large number of countries. (NEA) [fr

Nuclear material accounting software for Ukraine

International Nuclear Information System (INIS)

Doll, M.; Ewing, T.; Lindley, R.; McWilliams, C.; Roche, C.; Sakunov, I.; Walters, G.

1999-01-01

Among the needs identified during initial surveys of nuclear facilities in Ukraine was improved accounting software for reporting material inventories to the regulatory body. AIMAS (Automated Inventory/Material Accounting System) is a PC-based application written in Microsoft Access that was jointly designed by an US/Ukraine development team. The design is highly flexible and configurable, and supports a wide range of computing infrastructure needs and facility requirements including situations where networks are not available or reliable. AIMAS has both English and Russian-language options for displays and reports, and it operates under Windows 3.1, 95, or NT 4.0trademark. AIMAS functions include basic physical inventory tracking, transaction histories, reporting, and system administration functions (system configuration, security, data backup and recovery). Security measures include multilevel password access control, all transactions logged with the user identification, and system administration control. Interfaces to external modules provide nuclear fuel burn-up adjustment and barcode scanning capabilities for physical inventory taking. AIMAS has been installed at Kiev Institute of Nuclear Research (KINR), South Ukraine Nuclear Power Plant (SUNPP), Kharkov Institute of Physics and Technology (KIPT), Sevastopol Institute of Nuclear Energy and Industry (SINEI), and the Ministry of Environmental Protection and Nuclear Safety/Nuclear Regulatory Administration (MEPNS/NRA). Facility specialists are being trained to use the application to track material movement and report to the national regulatory authority

Advancement adopted for physical protection system at BARC facilities Tarapur

International Nuclear Information System (INIS)

Jaroli, Manish; Ameta, Rohit; Patil, V.H.; Dubey, K.

2015-01-01

Considering the prevailing security situation and threat perception to the nuclear installations in particular, it has become essential to strengthen security system at BARC Tarapur in an effective manner to avert any attempt of sabotage and to ensure smooth functioning of security and safety of the nuclear installations. International Atomic Energy Agency (IAEA) and Atomic Energy Regulatory Board (AERB) have provided various security guides for the physical protection system (PPS) for nuclear installations and there has been advancement in physical and personnel protection system due to evolution of new technologies. In line with this, latest technologies have been adopted in PPS for BARC facilities, Tarapur recently. This includes state of art RFID card based access control, visitor and contractor management system, electronic key management system. Digital signature based biometric visitor and contractor management system; Digital signature based leave management system; Distress alarm system (DAS); Guard tour monitoring system (GTMS); Secure network access system (SNAS) as well as multilayered access control system at plant level. This will strengthen the surveillance and monitoring of personnel and visitors at BARC facilities. (author)

Design methodology for the physical protection upgrade rule requirements for fixed sites. Technical report

International Nuclear Information System (INIS)

Evans, L.J. Jr.; Allen, T.

1980-06-01

This Design Methodology document aids the licensee in understanding how the fixed site requirements of the Physical Protection Upgrade Rule affect the design of physical protection systems for fuel processing plants, fuel manufacturing plants, or other fixed site special nuclear material operations involving possession or use of formula quantities of strategic special nuclear material. The document consists of three major elements: Logic Trees, Safeguards Jobs and Component Matrices, and Effectiveness Test Questionnaires. The work is based upon a previous study conducted by Sandia Laboratories for the Nuclear Regulatory Commission

40 CFR 73.33 - Authorized account representative.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Authorized account representative. 73.33 Section 73.33 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) SULFUR DIOXIDE ALLOWANCE SYSTEM Allowance Tracking System § 73.33 Authorized account...

Building Protection Against External Ionizing Fallout Radiation

Energy Technology Data Exchange (ETDEWEB)

Dillon, Michael B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Homann, Steven G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-12-01

A nuclear explosion has the potential to injure or kill tens to hundreds of thousands of people through exposure to fallout (external gamma) radiation. Existing buildings can protect their occupants (reducing external radiation exposures) by placing material and distance between fallout particles and indoor individuals. This protection is not well captured in current fallout risk assessment models and so the US Department of Defense is implementing the Regional Shelter Analysis methodology to improve the ability of the Hazard Prediction and Assessment Capability (HPAC) model to account for building protection. This report supports the HPAC improvement effort by identifying a set of building attributes (next page) that, when collectively specified, are sufficient to calculate reasonably accurate, i.e., within a factor of 2, fallout shelter quality estimates for many individual buildings. The set of building attributes were determined by first identifying the key physics controlling building protection from fallout radiation and then assessing which building attributes are relevant to the identified physics. This approach was evaluated by developing a screening model (PFscreen) based on the identified physics and comparing the screening model results against the set of existing independent experimental, theoretical, and modeled building protection estimates. In the interests of transparency, we have developed a benchmark dataset containing (a) most of the relevant primary experimental data published by prior generations of fallout protection scientists as well as (b) the screening model results.

German physical protection concept for the storage of spent fuel elements in transport and storage casks

International Nuclear Information System (INIS)

Weil, L.; Maier, R.

2005-01-01

Full text: In Germany, the legal regulations and requirements derived from rules and guidelines for the protection of storage facilities for spent fuel elements from disruptive action or other inference by third parties are structured hierarchically. The Atomic Energy Act constitutes the top level. It is supported by federal ordinances. The next level down is formed by the rules and guidelines. The storage of nuclear fuels may only be authorized, according to the provisions of the Atomic Energy Act, if the required protection from disruptive action or other interference by third parties can be guaranteed as following: it must be possible to prevent any danger to life and health due to a substantial amount of direct radiation or due to the release of a substantial amount of radioactive material; it must be possible to prevent singular or repeated acts of stealing nuclear fuels in such amounts that a critical accumulation can be produced directly without reprocessing and enrichment. Knowing that nuclear installations cannot be protected from every possible interference, physical protection is focused on basic security standards, the so-called design basic threat (DBT), departing from the assumed interference. DBT is regularly reviewed by the competent federal authorities and authorities of the states and are revised on the basis of newly gained knowledge, if necessary, such as in the wake of the terrorist attacks in the U.S. on September 11, 2001. The operator must guarantee and give proof of a sufficient level of physical protection of the plant. The sole physical protection measures implemented by the operator cannot ensure the required protection from other interference by third parties for an unlimited time span. The concept therefore requires additional physical protection measures by the police. (author)

Chapter 1: A little of Radiation Physics and radiation protection

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

The chapter 1 presents the subjects: 1) quantities and units of radiation physics which includes: the electron volt (eV); Exposure (X); Absorbed dose (D); Dose equivalent (H); Activity (A); Half-life; Radioactive decay; 2) Radiation protection which includes: irradiation and radioactive contamination; irradiation; contamination; background radiation; dose limits for individual occupationally exposed (IOE) and for the general public.

40 CFR 73.31 - Establishment of accounts.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Establishment of accounts. 73.31 Section 73.31 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) SULFUR DIOXIDE ALLOWANCE SYSTEM Allowance Tracking System § 73.31 Establishment of accounts. (a...

Users guide for evaluating alternative fixed-site physical protection systems using ''FESEM''

International Nuclear Information System (INIS)

Chapman, L.D.; Kinemond, G.A.; Sasser, D.W.

1977-11-01

The objective of this manual is to provide a guide for evaluating physical protection systems using the Forcible Entry Safeguards Effectiveness Model (FESEM). It is intended for use by personnel involved in evaluating fixed-site security systems, or managers involved in making decisions related to the modification of existing protection systems or the implementation of new systems. This users' guide has been written for an audience which has some previous computer experience

Material Control and Accounting (MC and A) System Upgrades and Performance Testing at the Russian Federal Nuclear Center-All-Russian Scientific Research Institute of Experimental Physics (RFNC-VNIIEF)

International Nuclear Information System (INIS)

Bushmelev, Vadim; Viktorov, Vladimir; Zhikharev, Stanislav; Yuferev, Vladimir; Singh, Surinder Paul; Kuzminski, Jozef; Hogan, Kevin; McKisson, Jacquelin

2008-01-01

The All-Russian Scientific Research Institute of Experimental Physics (VNIIEF), founded in 1946 at the historic village of Sarov, in Nizhniy Novgorod Oblast, is the largest nuclear research center in the Rosatom complex. In the framework of international collaboration, the United States (US) Department of Energy/National Nuclear Security Agency, in cooperation with US national laboratories, on the one hand, Rosatom and VNIIEF on the other hand, have focused their cooperative efforts to upgrade the existing material protection control and accountability system to prevent unauthorized access to the nuclear material. In this paper we will discuss the present status of material control and accounting (MC and A) system upgrades and the preliminary results from a pilot program on the MC and A system performance testing that was recently conducted at one technical area.

Physics basis and mechanical design of the actively cooled duct scraper protection for the JET neutral beam enhancement

Energy Technology Data Exchange (ETDEWEB)

Wilson, D.J. [UKAEA Fusion/Euratom Association, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom)], E-mail: dwilson@jet.uk; Ciric, D.; Cox, S.J.; Jones, T.T.C.; Kovari, M. [UKAEA Fusion/Euratom Association, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Li Puma, A. [Association EURATOM-CEA, CEA-Cadarache, 13108 St. Paul-Lez-Durance (France); Martin, D.; Milnes, J.; Shannon, M.; Surrey, E. [UKAEA Fusion/Euratom Association, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom)

2007-10-15

The objectives of the JET neutral beam enhancement (NBE) include raising the delivered power from the present 25 MW to more than 34 MW and increasing the pulse length from 10 to 20 s. The additional power will be obtained partly by increasing the fractional energy components of the beam, resulting from acceleration of molecular ions, hence increasing the total particle flux. These changes place extreme demands on the design of the upgraded protection to the torus entry duct. The present inertial duct protection already reaches its thermomechanical limit in 10 s pulses, and active cooling of the upgraded duct protection is therefore essential. Extensive analysis of the pressure and temperature evolution in the present un-cooled duct established the relationship between gas re-emission and surface temperature for copper in this operating environment. This information was used in an integrated physics and engineering approach to the design of the actively cooled duct protection, taking into account the power loads from direct beam interception and re-ionisation. Surface temperature determines power density through the gas re-emission and consequential beam re-ionisation. These considerations define the normal operating point for the chosen enhanced hypervapotron element technology. This approach demonstrated that supplementary in situ duct cryopumping would not be needed, provided that the required heat-transfer performance could be met without any encroachment of the elements beyond the space envelope of the existing inertial duct protection plates. This requirement posed severe constraints on the mechanical design of the hypervapotron element array and its manifolding; the adopted engineering design solutions are presented.

40 CFR 73.34 - Recordation in accounts.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Recordation in accounts. 73.34 Section 73.34 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) SULFUR DIOXIDE ALLOWANCE SYSTEM Allowance Tracking System § 73.34 Recordation in accounts. (a) After a...

Dynamic material accountancy in an integrated safeguards system

International Nuclear Information System (INIS)

Murrell, J.S.

1979-01-01

The nuclear material safeguards system at the Portsmouth Gaseous Diffusion Plant is currently being improved. A new material control system will provide computerized monitoring and accountability, and a new physical protection system will provide upgraded perimeter and portal entry monitoring. The control system incorporates remote computer terminals at all processing, transfer and storage areas throughout the plant. Terminal equipment is interfaced to a computer through teletype equipment. A typical terminal transaction would require verification that the particular activity (material movement or process operation) is authorized, identifying the container involved, weighing the container, and then verifying the enrichment with non-destructive assay instrumentation. The system, when fully operational, will provide near real-time accountability for each eight-hour work shift for all items in process. (author)

Dynamic material accountancy in an integrated safeguards system

International Nuclear Information System (INIS)

Murrell, J.S.

1978-01-01

The nuclear material safeguards system at the Portsmouth Gaseous Diffusion Plant is currently being improved. A new material control system will provide computerized monitoring and accountability, and a new physical protection system will provide upgraded perimeter and portal entry monitoring. The control system incorporates remote computer terminals at all processing, transfer, and storage areas throughout the plant. Terminal equipment is interfaced to a computer through teletype equipment. A typical terminal transaction would require verification that the particular activity (material movement or process operation) is authorized, identifying the container involved, weighing the container, and then verifying the enrichment with non-destructive assay instrumentation. The system, when fully operational, will provide near real-time accountability for each eight-hour work shift for all items in process

Implementation of physical protection of nuclear material in Yugoslavia and Slovenia - recent and planned activities

International Nuclear Information System (INIS)

Pesic, M.; Nikolic, A.; Nikolic, D.; Stegnar, P.

2002-09-01

In more than ten last years region of South-East Europe (especially countries originated from previous the Socialistic Federal Republics of Yugoslavia) was involved (or surrounded, at least) by various conflicts, including wars of different intensities. These unfavourable conditions have put additional focus at nuclear material stored in various institutions in the region. Following the recommendations of the International Atomic Energy Agency (IAEA) on straighten the physical protection of nuclear material, various actions were done or are planned in the Yugoslavia and Slovenia in aim to increase level of physical protection of nuclear material during its different usage and storage. Especial attention is drawn to update the administration rules, education of the involved personnel and redundancy of different physical protection modes to prevent stealing and smuggling of nuclear material in both the countries or at country borders. The financial and expert help at low-level scale were offered by the IAEA and US government to Yugoslavia in 1996/97. It was used to increase the physical protection of fresh high-enriched uranium fuel stored and controlled regularly by the inspectors of the Safeguard Department of the IAEA. The further help and financial support is expected from the IAEA, USA and relevant European Union (EU) organisations in aim to tighter the borders of both the countries to prevent the illegal traffic of nuclear materials through the Europe. (author)

Children´s sun protection need not conflict with health promoting physical activity

DEFF Research Database (Denmark)

Söderström, Margareta; Boldemann, Cecilia; Wester, Ulf

and vegetation influenced UV-exposure and also children´s physical activity measured with step-counters. In Malmö access to spacious outdoor play settings with vegetation decreased sunburn risk and increased physical activity during children´s free play in May - also during long stay outdoor. Results from...... Raleigh in April also indicate that vegetation is sunprotective when children play. Favourable outdoor environment may promote both sun protection and physical activity in a Nordic spring or summer climate, while for physical activity, this might not be so pronounced at a southern mid-latitude due...

75 FR 62695 - Physical Protection of Irradiated Reactor Fuel in Transit

Science.gov (United States)

2010-10-13

... Irradiated Reactor Fuel in Transit AGENCY: Nuclear Regulatory Commission. ACTION: Proposed rule. SUMMARY: The... nuclear fuel in transit? H. Why require a telemetric position monitoring system or an alternative tracking... nuclear fuel in transit. The interim final rule added 10 CFR 73.37, ``Requirements for Physical Protection...

78 FR 50313 - Physical Protection of Irradiated Reactor Fuel in Transit

Science.gov (United States)

2013-08-19

... Irradiated Reactor Fuel in Transit AGENCY: Nuclear Regulatory Commission. ACTION: Orders; rescission. SUMMARY... the NRC published a final rule, ``Physical Protection of Irradiated Fuel in Transit,'' on May 20, 2013... of Irradiated Reactor Fuel in Transit'' (RIN 3150-AI64; NRC-2009-0163). The final rule incorporates...

Guide for the evaluation of physical protection equipment. Book 1: Volumes I--III

International Nuclear Information System (INIS)

Haberman, W.

1977-06-01

A guide for evaluating the performance of commercially available physical protection equipment has been prepared in partial fulfillment of Task 2 of MITRE contract AT(49-24)-0376 for use by the U.S. Nuclear Regulatory Commission (NRC). Separate evaluation procedures are provided for each generic type of equipment contained in the companion document, Catalog of Physical Protection Equipment. Among the equipment parameters evaluated, as appropriate, are sensitivity, area/volume of coverage, false/nuisance alarm rate, resistance to countermeasures, environmental requirements, installation parameters and maintenance. Four evaluation techniques are employed (inspections, analyses, demonstrations and tests); standard test equipment (both commercially available as well as developmental) to be used in the evaluation are listed

US Department of Energy (DOE)/Gosatomnadzor (GAN) of Russia project at the Petersburg Nuclear Physics Institute (PNPI)

International Nuclear Information System (INIS)

Baranov, I.A.; Konoplev, K.A.; Hauser, G.C.

1997-01-01

This paper presents a summary of work accomplished within the scope of the DOE-Gosatomnadzor (GAN) Agreement to reduce vulnerability to theft of direct-use nuclear materials in Russia. The DOE-GAN agreement concerns the Russian Academy of Science B.P. Konstantinov Petersburg Nuclear Physics Institute (PNPI), located 45 kilometers from St. Petersburg. The PNPI operates facilities to research basic nuclear physics. Current world conditions require particular attention to the issue of Material Protection, Control, and Accounting (MPC ampersand A) of nuclear materials. The long-term plan to increase security at the facility is outlined, including training, physical protection upgrades, and material control and accountability. 4 figs

MATERIAL CONTROL ACCOUNTING INMM

Energy Technology Data Exchange (ETDEWEB)

Hasty, T.

2009-06-14

Since 1996, the Mining and Chemical Combine (MCC - formerly known as K-26), and the United States Department of Energy (DOE) have been cooperating under the cooperative Nuclear Material Protection, Control and Accounting (MPC&A) Program between the Russian Federation and the U.S. Governments. Since MCC continues to operate a reactor for steam and electricity production for the site and city of Zheleznogorsk which results in production of the weapons grade plutonium, one of the goals of the MPC&A program is to support implementation of an expanded comprehensive nuclear material control and accounting (MC&A) program. To date MCC has completed upgrades identified in the initial gap analysis and documented in the site MC&A Plan and is implementing additional upgrades identified during an update to the gap analysis. The scope of these upgrades includes implementation of MCC organization structure relating to MC&A, establishing material balance area structure for special nuclear materials (SNM) storage and bulk processing areas, and material control functions including SNM portal monitors at target locations. Material accounting function upgrades include enhancements in the conduct of physical inventories, limit of error inventory difference procedure enhancements, implementation of basic computerized accounting system for four SNM storage areas, implementation of measurement equipment for improved accountability reporting, and both new and revised site-level MC&A procedures. This paper will discuss the implementation of MC&A upgrades at MCC based on the requirements established in the comprehensive MC&A plan developed by the Mining and Chemical Combine as part of the MPC&A Program.

A re-evaluation of physical protection standards for irradiated HEU fuel

International Nuclear Information System (INIS)

Lyman, Edwin; Kuperman, Alan

2002-01-01

In the post-September 11 era, it is essential to reconsider all the assumptions upon which the physical protection systems of the past were based and determine whether these assumptions are still appropriate in light of the current terrorist threat. For instance, the U.S. Nuclear Regulatory Commission definition of a 'formula quantity' of special nuclear material is derived from the belief that a terrorist plot to carry out multiple coordinated attacks on different facilities with the goal of acquiring enough SNM for a nuclear weapon is incredible. This assumption has clearly been proven wrong by the September 11 attacks. Another standard that needs to be revisited is the 'self-protection' threshold that determines whether or not an item containing SNM is considered to be 'irradiated' for physical protection purposes. The current value of this threshold, 1 Sv/hr unshielded at 1 meter, is of questionable value as a deterrent to determined terrorists who would be willing to sustain long-term injury as long as they could accomplish their near-term goals. A more credible threshold would be set at a level that would have a high likelihood of disabling the perpetrators before they could complete their mission. Most irradiated nonpower reactor fuels would be unable to meet such a standard. This raises serious questions about the adequacy of the level of physical protection applied today to the large inventories of irradiated HEU fuels now scattered in storage sites around the world. The absence of a coherent global policy for dealing with these materials has created a situation rife with vulnerabilities that terrorists could exploit. The international community, now seized with concern about unused stockpiles of unirradiated HEU fuels around the world, also needs to appreciate the dangers posed by lightly irradiated spent fuels as well. A U.S. proposal to import Russian HEU for supplying U.S. nonpower reactors will only prolong this situation This paper will review policy

The Relationship between Physical Activity and Thermal Protective Clothing on Functional Balance in Firefighters

Science.gov (United States)

Kong, Pui W.; Suyama, Joe; Cham, Rakie; Hostler, David

2012-01-01

We investigated the relationship between baseline physical training and the use of firefighting thermal protective clothing (TPC) with breathing apparatus on functional balance. Twenty-three male firefighters performed a functional balance test under four gear/clothing conditions. Participants were divided into groups by physical training status,…

The importance of accounting principles in the accounting profession

OpenAIRE

Daniela Raluca Patrascu

2014-01-01

A true professional accountant must meet the following basic requirements: integrity, objectivity, professional competence, confidentiality, professional behavior, respect to technical and professional standards. Integrity expresses conceptually the professional accountant’s obligation to behave with honesty and fairness in professional and business relationships. Any company is seeking an accountant as, sincere and honest, which means the operation of fair dealing and fair protection aginst ...

Bibliography of technical guidance for the physical protection upgrade rule requirements for fixed sites

International Nuclear Information System (INIS)

Evans, L.J. Jr.; Allen, T.

1980-06-01

A bibliography of technical references covering physical security systems, components, and procedures was prepared to provide Nuclear Regulatory Commission licensees a listing of available documents that could be used by licensees to select systems, components, and procedures to meet the revised physical protection requirements of 10 CFR Part 73

The Impact of Accountability on Student Performance in a Secondary Physical Education Badminton Unit

Science.gov (United States)

Lund, Jacalyn; Shanklin, Jennifer

2011-01-01

The purpose of this study was to examine the effect of accountability on the quality of student motor responses during a 10-day badminton unit with female high school students enrolled in a required physical education class. Students in the control class participated in the same learning activities taught by the same teacher as the treatment…

Guide for the evaluation of physical protection equipment. Book 2: Volumes IV--VIII

International Nuclear Information System (INIS)

Haberman, W.

1977-06-01

A guide for evaluating the performance of commercially available physical protection equipment has been prepared for use by U.S. NRC. Separate evaluation procedures are provided for each generic type of equipment contained in the companion document, Catalog of Physical Protection Equipment (NUREG-0274). Among the equipment parameters evaluated are sensitivity, area/volume of coverage, false/nuisance alarm rate, resistance to countermeasures, environmental requirements, installation parameters and maintenance. Four evaluation techniques are employed (inspections, analyses, demonstrations and tests); standard test equipment (both commercially available as well as developmental) to be used in the evaluation is listed. The following categories of equipment are covered: surveillance and alarm assessment components, contraband detection components, automated response components, general purpose display components, and general purpose communication components

Guidance and considerations for the implementation of INFCIRC/225/Rev.4, the physical protection of nuclear material and nuclear facilities

International Nuclear Information System (INIS)

2000-05-01

This publication is intended to provide guidance and considerations for a State's competent authority to better understand and prescribe appropriate requirements, consistent with INFCIRC/225/Rev.4 for the protection of nuclear material and nuclear facilities which are compatible with accepted international practice. This report, together with a more detailed report, Handbook on the Physical Protection of Nuclear Material and Facilities, which addresses to the licencee or designer of physical protection systems who has specific implementation and compliance responsibilities, should be used in conjunction to each other to provide better and comprehensive guidance on physical protection

Guidance and considerations for the implementation of INFCIRC/225/Rev.4, the physical protection of nuclear material and nuclear facilities

International Nuclear Information System (INIS)

2002-05-01

This publication is intended to provide guidance and considerations for a State's competent authority to better understand and prescribe appropriate requirements, consistent with INFCIRC/225/Rev.4 for the protection of nuclear material and nuclear facilities which are compatible with accepted international practice. This report, together with a more detailed report, Handbook on the Physical Protection of Nuclear Material and Facilities, which addresses to the licensee or designer of physical protection systems who has specific implementation and compliance responsibilities, should be used in conjunction to each other to provide better and comprehensive guidance on physical protection

Systematic evaluation of the Cernavoda nuclear power plant physical protection system

International Nuclear Information System (INIS)

Ionescu, D.S.

2002-01-01

Full text: For three years at Cernavoda NPP is working a process to systematic evaluating the effectiveness of the Physical Protection System (PPS). Due to the fact that this evaluation has to be continuous, the first important step is to define a baseline to compare periodically the performance of PPS against it. The necessity of that process has been identified as follows: the continuous changes in the field of perceived threats against Cernavoda NPP and the necessary measures to respond to that changing climate; the needful to improve the performance of PPS against certain threats in conjunction with the needful to allocate substantially financial and human resources to cover the discovered weakness in the system; an assistant to take the appropriate measure in case of indisponibility of one or more components or parts of the PPS. The second step is the continuous tracking of the behavior of PPS in order to determine: the maintenance resource allocation and the priorities of the work; the predictive behavior of installed components to determine the future appropriate measures, including budget dimensioning. SAVI is a PC compatible program developed by SANDIA Laboratory (USA) for comprehensive analysis of PPS effectiveness. That program is organized in two modules: the Adversary Sequence Diagram (ASD) module and the outsider module modeling trough specific codes both the characteristics of PPS and of the predicted adversary. Combining the two modules related to a specific PPS and adversary is possible to find out the effectiveness of the physical protection system for each vital zone along to ten possible paths to penetrate by adversary, starting with the most vulnerable one. Because of two conservative assumption considered by the SAVI algorithm (adversary know the PPS characteristics and they use an optimal penetration strategy), the measure of effectiveness (probability of interruption - P I ) is very realistic and conservative related to the necessary

Status report on US-Russian laboratory-to-laboratory cooperation in nuclear materials protection, control and accounting

International Nuclear Information System (INIS)

Mullen, M.

1996-01-01

In April 1994, a new program of cooperation on nuclear materials protection, control, and accounting (MPC and A) was initiated between (1) the US Department of Energy and its laboratories and (2) nuclear institutes and enterprises of the Russian Federation. The program is called the Laboratory-to-Laboratory Nuclear Materials Protection, Control, and Accounting Program (Lab-to-Lab MPC and A Program); it is one of several, complementary US-Russian MPC and A programs. The purpose of the Lab-to-Lab MPC and A Program is to accelerate progress toward a goal that is vital to the national security interests of both countries: reducing the risk of nuclear weapons proliferation by strengthening MPC and A systems. In its first two years, the program has made significant progress and has expanded to include many additional Russian participants. It has also fostered a spirit of mutual understanding, partnership, and respect between US and Russian nuclear specialists, which has paved the way for advances in other MPC and A and nuclear security cooperative efforts. This paper reviews the current status of the program. In addition to summarizing the background and objectives of the program, the paper describes highlights of recent work and outlines future directions for Lab-to-Lab MPC and A cooperation

DOE groundwater protection strategy

International Nuclear Information System (INIS)

Lichtman, S.

1988-01-01

EH is developing a DOE-wide Groundwater Quality Protection Strategy to express DOE's commitment to the protection of groundwater quality at or near its facilities. This strategy responds to a September 1986 recommendation of the General Accounting Office. It builds on EPA's August 1984 Ground-Water Protection Strategy, which establishes a classification system designed to protect groundwater according to its value and vulnerability. The purposes of DOE's strategy are to highlight groundwater protection as part of current DOE programs and future Departmental planning, to guide DOE managers in developing site-specific groundwater protection practices where DOE has discretion, and to guide DOE's approach to negotiations with EPA/states where regulatory processes apply to groundwater protection at Departmental facilities. The strategy calls for the prevention of groundwater contamination and the cleanup of groundwater commensurate with its usefulness. It would require long-term groundwater protection with reliance on physical rather than institutional control methods. The strategy provides guidance on providing long-term protection of groundwater resources; standards for new remedial actions;guidance on establishing points of compliance; requirements for establishing classification review area; and general guidance on obtaining variances, where applicable, from regulatory requirements. It also outlines management tools to implement this strategy

The Nature and Incorporation of CSPAP Learning Experiences in Physical Education Teacher Education: Accounts of Faculty from "Highly Effective" Programs

Science.gov (United States)

Webster, Collin A.; Russ, Laura; Webster, Liana; Molina, Sergio; Lee, Heesu; Cribbs, Jason

2016-01-01

The purpose of this study was to examine faculty accounts of the nature and incorporation of Comprehensive School Physical Activity Program (CSPAP) learning experiences for preservice physical education teachers (PPETs) in undergraduate physical education teacher education (PETE). Nine individuals employed as faculty members in different PETE…

A Trusted Autonomic Architecture to Safeguard Cyber-Physical Control Leaf Nodes and Protect Process Integrity

OpenAIRE

Chiluvuri, Nayana Teja

2015-01-01

Cyber-physical systems are networked through IT infrastructure and susceptible to malware. Threats targeting process control are much more safety-critical than traditional computing systems since they jeopardize the integrity of physical infrastructure. Existing defence mechanisms address security at the network nodes but do not protect the physical infrastructure if network integrity is compromised. An interface guardian architecture is implemented on cyber-physical control leaf nodes to mai...

Use of Nuclear Material Accounting and Control for Nuclear Security Purposes at Facilities. Implementing Guide

International Nuclear Information System (INIS)

2015-01-01

Nuclear material accounting and control (NMAC) works in a complementary fashion with the international safeguards programme and physical protection systems to help prevent, deter or detect the unauthorized acquisition and use of nuclear materials. These three methodologies are employed by Member States to defend against external threats, internal threats and both state actors and non-state actors. This publication offers guidance for implementing NMAC measures for nuclear security at the nuclear facility level. It focuses on measures to mitigate the risk posed by insider threats and describes elements of a programme that can be implemented at a nuclear facility in coordination with the physical protection system for the purpose of deterring and detecting unauthorized removal of nuclear material

Conceptual Foundations of Transforming the Traditional Accounting System into Sustainability Accounting

OpenAIRE

Sokol Oleg H.

2017-01-01

Under modern conditions the significance of social and environmental security is manifested in costs of restoring and protecting the environment, ensuring social security at a decent level and requires reflecting these issues in accounting. The aim of the article is to identify and analyze the ways of transition from traditional accounting to sustainability accounting. In the article the following research methods are used: observation, comparison, the empirical method, the monographic method...

Trial operation of material protection, control, and accountability systems at two active nuclear material handling sites within the All-Russian Institute of Experimental Physics (VNIIEF)

International Nuclear Information System (INIS)

Skripka, G.; Vatulin, V.; Yuferev, V.

1997-01-01

This paper discusses Russian Federal Nuclear Center (RFNC)-VNIIEF activities in the area of nuclear material protection, control, and accounting (MPC and A) procedures enhancement. The goal of such activities is the development of an automated systems for MPC and A at two of the active VNIIEF research sites: a research (reactor) site and a nuclear material production facility. The activities for MPC and A system enhancement at both sites are performed in the framework of a VNIIEF-Los Alamos National Laboratory contract with participation from Sandia National Laboratories, Lawrence Livermore National Laboratory, Brookhaven National Laboratory, Oak Ridge National Laboratory, Pacific Northwest National Laboratory, and PANTEX Plant in accordance with Russian programs supported by MinAtom. The American specialists took part in searching for possible improvement of technical solutions, ordering equipment, and delivering and testing the equipment that was provided by the Americans

Standards for radiation protection and diagnostic radiology at the IAEA Dosimetry Laboratory

International Nuclear Information System (INIS)

Pernicka, F.; Andreo, P.; Meghzifene, A.; Czap, L.; Girzikowsky, R.

1999-01-01

International standardization in dosimetry is essential for the successful exploitation of radiation technology. The IAEA dosimetry programme is focused into services provided to Member States through the IAEA/WHO Network of Secondary Standard Dosimetry Laboratories (SSDLs), to radiotherapy centres and radiation processing facilities. Radiation protection quantities defined by ICRU and ICRP are used to relate the risk due to exposure to ionizing radiation to a single quantity, irrespective of the type of radiation, which takes into account the human body as a receptor. Two types of quantities, limiting and operational, can be related to basic physical quantities which are defined without need for considering specific aspects of radiation protection, e.g. air kerma for photons and fluence for neutrons. The use of a dosimeter for measurements in radiation protection requires a calibration in terms of a physical quantity together with a conversion from physical into protection quantities by means of a factor or a coefficient

Development of Integrated Code for Risk Assessment (INCORIA) for Physical Protection System

International Nuclear Information System (INIS)

Jang, Sung Soon; Seo, Hyung Min; Yoo, Ho Sik

2010-01-01

A physical protection system (PPS) integrates people, procedures and equipment for the protection of assets or facilities against theft, sabotage or other malevolent human attacks. Among critical facilities, nuclear facilities and nuclear weapon sites require the highest level of PPS. After the September 11, 2001 terrorist attacks, international communities, including the IAEA, have made substantial efforts to protect nuclear material and nuclear facilities. The international flow on nuclear security is using the concept or risk assessment. The concept of risk assessment is firstly devised by nuclear safety people. They considered nuclear safety including its possible risk, which is the frequency of failure and possible consequence. Nuclear security people also considers security risk, which is the frequency of threat action, vulnerability, and consequences. The concept means that we should protect more when the credible threat exists and the possible radiological consequence is high. Even if there are several risk assessment methods of nuclear security, the application needs the help of tools because of a lot of calculation. It's also hard to find tools for whole phase of risk assessment. Several codes exist for the part of risk assessment. SAVI are used for vulnerability of PPS. Vital area identification code is used for consequence analysis. We are developing Integrated Code for Risk Assessment (INCORIA) to apply risk assessment methods for nuclear facilities. INCORIA evaluates PP-KINAC measures and generation tools for threat scenario. PP-KINAC is risk assessment measures for physical protection system developed by Hosik Yoo and is easy to apply. A threat scenario tool is used to generate threat scenario, which is used as one of input value to PP-KINAC measures

The millennium problem and physical protection systems in UK

International Nuclear Information System (INIS)

Groves, J.

1999-01-01

In the United Kingdom the Competent Authority is Nuclear Industries Directorate of the UK Government's department of Trade and Industry. It is charged with ensuring that the security regimes at all civil nuclear sites in the country conform with the rues laid down by Government. This task is achieved through giving advice, issuing and interpreting policy, performing trustworthiness checks and conducting security assessments of all aspects of security. This presentation is not concerned with safety or safeguards systems but purely with those concerned with physical protection

Candidate mechanisms accounting for effects of physical activity on breast carcinogenesis.

Science.gov (United States)

Thompson, Henry J; Jiang, Weiqin; Zhu, Zongjian

2009-09-01

Evidence is strong that a reduction in risk for breast cancer is associated with moderate to vigorous physical activity (PA); however, there is limited understanding of the role of type, intensity, duration, and frequency of PA and their mechanisms in accounting for this health benefit. The objective of this review is to stimulate investigations of candidate mechanisms that may account for the effects of the intensity and duration of aerobic PA on breast cancer risk and tumor burden. Three hypotheses are considered: 1) the mTOR network hypothesis: PA inhibits carcinogenesis by suppressing the activation of the mTOR signaling network in mammary carcinomas; 2) the hormesis hypothesis: the carcinogenic response to PA is nonlinear and accounted for by a physiological cellular stress response; and 3) the metabolic reprogramming hypothesis: PA limits the amount of glucose and glutamine available to mammary carcinomas thereby inducing apoptosis because tumor-associated metabolic programming is reversed. To link these hypotheses to systemic effects of PA, it is recommended that consideration be given to determining: 1) what contracting muscle releases into circulation or removes from circulation that would directly modulate the carcinogenic process in epithelial cells; 2) whether the effects of muscle contraction on epithelial cell carcinogenesis are exerted in an endocrine, paracrine, autocrine, or intracrine manner; and 3) if the effects of muscle contraction on malignant cells differ from effects on normal or premalignant cells that do not manifest the hallmarks of malignancy. (c) 2009 IUBMB

LEGAL PROTECTION FOR CUSTOMER SEGREGATED ACCOUNT OWNER FROM LOSS DUE TO THE BANKCRUPTY OF FUTURES BROKERAGE FIRM

Directory of Open Access Journals (Sweden)

Yessy Meryantika Sari

2016-05-01

Full Text Available Commodity futures trading is a business activity that is complex and involves many parties including Client Segregated Account and Brokerage Company. This business promises huge benefits but ba-lanced with a high risk of loss. Therefore, a potential event of bankruptcy. Customer as the owner of the funds which mandated funds to the brokerage company to be managed for purposes of the transaction, should get legal protection from potential losses due to bankruptcy of futures brokerage firm. The spirit of the law in protection for customers is reflected in the preamble of le-gal norms futures trading as further elaborated in the general legal provisions stipulated in the Fu-tures Trading Act.

A Multi-area Model of a Physical Protection System for a Vulnerability Assessment

International Nuclear Information System (INIS)

Jang, Sung Soon; Yoo, Ho Sik

2008-01-01

A physical protection system (PPS) integrates people, procedures and equipment for the protection of assets or facilities against theft, sabotage or other malevolent human attacks. Among critical facilities, nuclear facilities and nuclear weapon sites require the highest level of PPS. After the September 11, 2001 terrorist attacks, international communities, including the IAEA, have made substantial efforts to protect nuclear material and nuclear facilities. These efforts include the Nuclear Security Fund established by the IAEA in 2002 and the Global Initiative to Combat Nuclear Terrorism which is launched by the USA and Russia in 2006. Without a regular assessment, the PPS might waste valuable resources on unnecessary protection or, worse yet, fail to provide adequate protection at critical points of a facility. Due to the complexity of protection systems, the assessment usually requires computer modeling techniques. Several Codes were developed to model and analyze a PPS. We also devised and implemented new analysis method and named it as Systematic Analysis of physical Protection Effectiveness (SAPE). A SAPE code consumes much time to analyze a PPS over a large area in detail. It is because SAPE uses meshes of an equal size for the analysis of a 2D map. The analysis is more accurate when the meshes of a smaller size are used. However, the analysis time is roughly proportional to the exponential of the number of meshes. Thus, the speed and accuracy is in a trade-off relation. In the paper, we suggest a multi-area model of a PPS for a vulnerability assessment to solve this problem. Using multi areas with different scales, we can accurately analyze a PPS near a target and can analyze it over a large area rather roughly

Termination of Safeguards for Accountable Nuclear Materials at the Idaho National Laboratory

International Nuclear Information System (INIS)

Holzemer, Michael; Carvo, Alan

2012-01-01

Termination of safeguards ends requirements of Nuclear Material Control and Accountability (MC and A) and thereby removes the safeguards basis for applying physical protection requirements for theft and diversion of nuclear material, providing termination requirements are met as described. Department of Energy (DOE) M 470.4 6 (Nuclear Material Control and Accountability [8/26/05]) stipulates: 1. Section A, Chapter I (1)( q) (1): Safeguards can be terminated on nuclear materials provided the following conditions are met: (a) 'If the material is special nuclear material (SNM) or protected as SNM, it must be attractiveness level E and have a measured value.' (b) 'The material has been determined by DOE line management to be of no programmatic value to DOE.' (c) 'The material is transferred to the control of a waste management organization where the material is accounted for and protected in accordance with waste management regulations. The material must not be collocated with other accountable nuclear materials.' Requirements for safeguards termination depend on the safeguards attractiveness levels of the material. For attractiveness level E, approval has been granted from the DOE Idaho Operations Office (DOE ID) to Battelle Energy Alliance, LLC (BEA) Safeguards and Security (S and S). In some cases, it may be necessary to dispose of nuclear materials of attractiveness level D or higher. Termination of safeguards for such materials must be approved by the Departmental Element (this is the DOE Headquarters Office of Nuclear Energy) after consultation with the Office of Security.

Development of the system for academic training of personnel engaged in nuclear material protection, control and accounting in Russia

International Nuclear Information System (INIS)

Kryuchkov, E.F.

2004-01-01

educational problems in area of nuclear materials physical protection, control and accountability (MPC and A) in Russia. General scheme of Russian educational system is considered with main emphasis on the directions under implementation now, namely academic training system, re-training system and specialists qualification upgrade system in MPC and A area. Russian academic training system consists of the educational programs at various levels: Bachelor of Sciences, Master of Sciences, Specialist (also referred to as an Engineer Degree), and professional re-training of the personnel already working in the nuclear field. Currently, only the Master of Sciences Graduate Program is completely developed for the students training. This is taking place at Moscow Engineering Physics Institute (State University, MEPhI), where the fourth generation of Masters has graduated from in May 2003. The graduates are now working at nuclear-related governmental agencies, non-governmental organizations, universities, and nuclear facilities. Development of the system to produce academically trained Russian MPC and A personnel is therefore well underway. MEPhI's MPC and A Engineering Degree Program which currently under development is considered in the paper. Analysis of MPC and A needs at Russian nuclear facilities has demonstrated the Engineering Degree Program is the best way to satisfy these needs and the resulting demands for MPC and A specialists at Russian nuclear enterprises. This paper discusses specific features of the Engineering Degree training required by Russian education legislation and the Russian system of quality control as applied to the training process. The paper summarizes the main joint actions undertaken during the past three years by MEPhI in collaboration with the US Department of Energy and US national laboratories to develop the MPC and A Engineering Degree Program in Russia. These actions include opening a new Engineering Degree specialty, Safeguards and Nonproliferation

Sun protection factor persistence during a day with physical activity and bathing

DEFF Research Database (Denmark)

Bodekaer, M.; Faurschou, A.; Philipsen, P.A.

2008-01-01

BACKGROUND/PURPOSE: The persistence of sunscreens during a day with physical activity and bathing is often debated. We wished to examine the durability of the protection achieved by one sunscreen application. METHODS: Seven areas were marked on the back of 24 volunteers. One area was phototested ...

Similarities between pre-eclampsia and atherosclerosis: a protective effect of physical exercise?

Science.gov (United States)

Belo, Luís; Santos-Silva, Alice; Quintanilha, Alexandre; Rebelo, Irene

2008-01-01

Pre-eclampsia (PE), a characteristic hypertensive disorder of human pregnancy and a leading cause of maternal and fetal mortality and morbidity worldwide, shares some similarities with atherosclerosis, namely the involvement of oxidative stress and of endothelial dysfunction in their pathophysiologies, the presence of similar typical lesions and of common risk factors. Although it is widely accepted that regular physical exercise protects against cardiovascular events, few studies have addressed the impact of physical activity in reducing PE risk. In this paper, similarities between atherosclerosis and PE, involving pathogenic mechanisms, are described. This paper also reviews the studies performed until now that evaluated the impact of regular physical exercise (prenataly or during pregnancy) in reducing risk of PE. The potential mechanisms underlying physical activity as a prophylactic approach of PE, as observed with cardiovascular diseases, are discussed.

Role of physical protection and safeguards technology used to Nuclear Material Security

International Nuclear Information System (INIS)

Djoko-Irianto, Ign.

2005-01-01

The presence of nuclear materials at any nuclear facility must be in secure and must be known as safeguards purpose such as its position, from or type and amount. The clarification of the amount be reported to the national regulatory body and International Atomic Energy Agency (IAEA) as the International regulatory body. The national regulatory body and IAEA will then verify that report. The verification must be done to know there is no difference of the amount, and to give the assurance to the International community that any diversion of safeguarded nuclear material from civil use to a prescribed military purpose would be detected. To carry out verification, several verification techniques such as non-destructive analysis, surveillance, unattended and remote monitoring and environmental sampling are explained to convey the impression how those techniques are implemented. According to the security requirement, the physical protection system including all components of physical protection system have to be effectively designed

Account 1983-84

International Nuclear Information System (INIS)

1984-01-01

Account prepared pursuant to section 3 (4) of the Radiological Protection Act 1970 of the receipts and payments of the National Radiological Protection Board for the year ended 31st March 1984; together with the Report of the Comptroller and Auditor General thereon. (In continuation of House of Commons Paper No. 149 of 1983-84). (U.K.)

ON HEALTH PROTECTION AND HEALTH RELATED PHYSICAL CULTURE TRAININGS OF FIRST YEAR STUDENTS

OpenAIRE

V.G. Fotynyuk

2017-01-01

Purpose: to assess health protection and health related physical culture trainings of first year students. Material: in the research first year students (n=121; 86 boys and 35girls of age 16 - 19 years, participated. Results: components of students’ individual health were found. Situation with health related physical culture trainings, ensuring students’ sound health and optimal functional potentials of their organisms were determined. It was found that leading role shall be played by formati...

Text of the Convention on the Physical Protection of Nuclear Material

International Nuclear Information System (INIS)

1979-11-01

The Final Act of the Meeting of Governmental Representatives to Consider the Drafting of a Convention on the Physical Protection of Nuclear Material was signed on 26 October 1979. According to paragraph 11 of the Final Act, ''The Meeting recommended that the text of the Convention be transmitted for information to the Twenty-Third General Conference of the International Atomic Energy Agency.''

The Predictive Effects of Protection Motivation Theory on Intention and Behaviour of Physical Activity in Patients with Type 2 Diabetes

Science.gov (United States)

Ali Morowatisharifabad, Mohammad; Abdolkarimi, Mahdi; Asadpour, Mohammad; Fathollahi, Mahmood Sheikh; Balaee, Parisa

2018-01-01

INTRODUCTION: Theory-based education tailored to target behaviour and group can be effective in promoting physical activity. AIM: The purpose of this study was to examine the predictive power of Protection Motivation Theory on intent and behaviour of Physical Activity in Patients with Type 2 Diabetes. METHODS: This descriptive study was conducted on 250 patients in Rafsanjan, Iran. To examine the scores of protection motivation theory structures, a researcher-made questionnaire was used. Its validity and reliability were confirmed. The level of physical activity was also measured by the International Short - form Physical Activity Inventory. Its validity and reliability were also approved. Data were analysed by statistical tests including correlation coefficient, chi-square, logistic regression and linear regression. RESULTS: The results revealed that there was a significant correlation between all the protection motivation theory constructs and the intention to do physical activity. The results showed that the Theory structures were able to predict 60% of the variance of physical activity intention. The results of logistic regression demonstrated that increase in the score of physical activity intent and self - efficacy increased the chance of higher level of physical activity by 3.4 and 1.5 times, respectively OR = (3.39, 1.54). CONCLUSION: Considering the ability of protection motivation theory structures to explain the physical activity behaviour, interventional designs are suggested based on the structures of this theory, especially to improve self -efficacy as the most powerful factor in predicting physical activity intention and behaviour. PMID:29731945

The Predictive Effects of Protection Motivation Theory on Intention and Behaviour of Physical Activity in Patients with Type 2 Diabetes.

Science.gov (United States)

Ali Morowatisharifabad, Mohammad; Abdolkarimi, Mahdi; Asadpour, Mohammad; Fathollahi, Mahmood Sheikh; Balaee, Parisa

2018-04-15

Theory-based education tailored to target behaviour and group can be effective in promoting physical activity. The purpose of this study was to examine the predictive power of Protection Motivation Theory on intent and behaviour of Physical Activity in Patients with Type 2 Diabetes. This descriptive study was conducted on 250 patients in Rafsanjan, Iran. To examine the scores of protection motivation theory structures, a researcher-made questionnaire was used. Its validity and reliability were confirmed. The level of physical activity was also measured by the International Short - form Physical Activity Inventory. Its validity and reliability were also approved. Data were analysed by statistical tests including correlation coefficient, chi-square, logistic regression and linear regression. The results revealed that there was a significant correlation between all the protection motivation theory constructs and the intention to do physical activity. The results showed that the Theory structures were able to predict 60% of the variance of physical activity intention. The results of logistic regression demonstrated that increase in the score of physical activity intent and self - efficacy increased the chance of higher level of physical activity by 3.4 and 1.5 times, respectively OR = (3.39, 1.54). Considering the ability of protection motivation theory structures to explain the physical activity behaviour, interventional designs are suggested based on the structures of this theory, especially to improve self -efficacy as the most powerful factor in predicting physical activity intention and behaviour.

Topics in radiation at accelerators: Radiation physics for personnel and environmental protection

International Nuclear Information System (INIS)

Cossairt, J.D.

1996-10-01

In the first chapter, terminology, physical and radiological quantities, and units of measurement used to describe the properties of accelerator radiation fields are reviewed. The general considerations of primary radiation fields pertinent to accelerators are discussed. The primary radiation fields produced by electron beams are described qualitatively and quantitatively. In the same manner the primary radiation fields produced by proton and ion beams are described. Subsequent chapters describe: shielding of electrons and photons at accelerators; shielding of proton and ion accelerators; low energy prompt radiation phenomena; induced radioactivity at accelerators; topics in radiation protection instrumentation at accelerators; and accelerator radiation protection program elements

Legal problems raised in Italy by the ratification of the Convention in Physical Protection - implications in Europe

International Nuclear Information System (INIS)

Albano, R.; Crocenzi, G.

1983-01-01

This paper examines the legal problems which arose in Italy when the Convention on the Physical Protection of Nuclear Material, opened for signature in 1980, was ratified by that country in 1982. The purpose and background of the Convention and its relationship with other international regulations, in particular in the field of transport, are analysed in detail. Finally, the paper reviews the main European laws (French, German and British) on physical protection of nuclear material. (NEA) [fr

Account 1988-89

International Nuclear Information System (INIS)

1989-01-01

Account, prepared pursuant to section 3(4) of the Radiological Protection Act 1970, of the National Radiological Protection Board showing the Income and Expenditure for the year ended 31 March 1989 and Balance Sheet as at 31 March 1989; together with the Report of the Comptroller and Auditor General thereon. (In continuation of House of Commons paper No. 619 of 1987-88.) (author)

Account 1988-89

Energy Technology Data Exchange (ETDEWEB)

1989-07-07

Account, prepared pursuant to section 3(4) of the Radiological Protection Act 1970, of the National Radiological Protection Board showing the Income and Expenditure for the year ended 31 March 1989 and Balance Sheet as at 31 March 1989; together with the Report of the Comptroller and Auditor General thereon. (In continuation of House of Commons paper No. 619 of 1987-88.) (author).

Account 1989-90

Energy Technology Data Exchange (ETDEWEB)

1990-07-20

Account, prepared pursuant to section 3(4) of the Radiological Protection Act 1970, of the National Radiological Protection Board showing the Income and Expenditure for the year ended 31 March 1990 and Balance sheet as at 31 March 1990; together with the Report of the Comptroller and Auditor General thereon. (In continuation of House of Commons Paper No. 493 of 1988-89). (author).

ASN guide project. Protection of base nuclear installations against external flooding

International Nuclear Information System (INIS)

2010-01-01

This guide aims at defining criteria to be taken into account to assess risks of flooding of a nuclear installation in case of external flooding, at proposing an acceptable method to assess such risks, at listing recommendations to define protection means adapted to the peculiarities of the flood risk and implemented by the operators with respect to the life phases of the installation, and in taking the climate change into account. The first part proposes an approach allowing the identification of reference situations which are to be taken into account for the flood risk. The second part deals with the quantification of parameters which characterize physical phenomena associated with these situations. The third part identifies the peculiarities of the flood risk as well as the guiding principles for designing options and protection mean selection with respect to a given flood risk

Framework for Proliferation Resistance and Physical Protection for Nonproliferation Impact Assessments

International Nuclear Information System (INIS)

Bari, R.

2008-01-01

This report describes a framework for proliferation resistance and physical protection evaluation for the fuel cycle systems envisioned in the expansion of nuclear power for electricity generation. The methodology is based on an approach developed as part of the Generation IV technical evaluation framework and on a qualitative evaluation approach to policy factors similar to those that were introduced in previous Nonproliferation Impact Assessments performed by DOE

Vulnerability Analysis of Physical Protection System at Hypothetical Facility

International Nuclear Information System (INIS)

Jung, Won Moog; Lee, Ho Jin; Yu, Dong Han; Min, Gyung Sik

2006-01-01

Since the 9/11 event in the U.S.A, International terror possibilities has been increasing for nuclear facilities including nuclear power plants(NPPs). It is necessary to evaluate the performance of an existing physical protection system(PPS) at nuclear facilities based on such malevolent acts. A PPS is a complex configuration of detection, delay, and response elements. Detection, delay, and response elements are all important to the analysis and evaluation of a PPS and its effectiveness. Methods are available to analyze a PPS and evaluate its effectiveness. Sandia National Laboratory(SNL) in the U.S.A was developed a System Analysis of Vulnerability to Intrusion (SAVI) computer code for evaluating the effectiveness of PPS against outsider threats. This study presents the vulnerability analysis of the PPS at hypothetical facility using SAVI code that the basic input parameters are from PPS of Hanaro Research Reactor at Korea Atomic Energy Research Institution. It is understand that PPS of research reactor and critical assemblies are deficient that that of NPP and nuclear materials of RRCAS are compact to transport For analysis, first, the site-specific Adversary Sequence Diagrams(ASDs) of the PPS is constructed. It helps to understand the functions of the existing PPS composed of physical areas and Protection Elements(PEs). Then, the most vulnerable path of an ASD as a measure of effectiveness is determined. The results in the analysis can used to suggest the possible PPS upgrades to the most vulnerable paths for the system like research reactor

Physics and engineering of radiation detection

CERN Document Server

Ahmed, Syed Naeem

2007-01-01

Physics and Engineering of Radiation Detection presents an overview of basic physics of radiation and its applications and covers the origins and properties of different kinds of ionizing radiation, their detection and measurement, and the procedures used to protect people and the environment from their potentially harmful effects. Covering both the basic physics of radiation and its applications, it will provide an up-to-date and coherent account of the origins and properties of the different kinds of ionizing radiation, and their detection and measurement. This book will illustrate the basic physical principles with an abundance of practical, worked-out examples, numerical problems, real world applications, and data, including biological effects, radon, risk assessment, and statistics.

Explicitly Accounting for Protected Lands within the GCAM 3.0

Energy Technology Data Exchange (ETDEWEB)

Dooley, James J.; Zhou, Yuyu

2012-05-01

The Global Change Assessment Model Version 3.0 defines three different levels of “Protected Lands” within the agricultural and landuse component. These three different scenarios effectively cordon off 3.5% (5.0 million km2) of the Earth’s terrestrial lands in the de minimus Protected Land Scenario, 5.0% (7.20 million km2) in the Core Protected Land Scenario, and 8.2% (11.8 million km2) in the Expanded Protected Land Scenario. None of these scenarios represents the “right” level of Protected Lands for the planet today or tomorrow. Rather, the goal is to create a range of scenarios that can be used in modeling human responses to climate change and the impact those would have on managed and unmanaged terrestrial lands. These scenarios harness the wealth of information in the United Nations Environment Programme World Conservation Monitoring Centre’s World Database on Protected Areas and its categories of explicit degrees of protection.

Applied physics of external radiation exposure dosimetry and radiation protection

CERN Document Server

Antoni, Rodolphe

2017-01-01

This book describes the interaction of living matter with photons, neutrons, charged particles, electrons and ions. The authors are specialists in the field of radiation protection. The book synthesizes many years of experiments with external radiation exposure in the fields of dosimetry and radiation shielding in medical, industrial and research fields. It presents the basic physical concepts including dosimetry and offers a number of tools to be used by students, engineers and technicians to assess the radiological risk and the means to avoid them by calculating the appropriate shields. The theory of radiation interaction in matter is presented together with empirical formulas and abacus. Numerous numerical applications are treated to illustrate the different topics. The state of the art in radiation protection and dosimetry is presented in detail, especially in the field of simulation codes for external exposure to radiation, medical projects and advanced research. Moreover, important data spread in differ...

Organization of medical physics and radiation protection: return on experience from some French and foreign health establishments. Report nr 306

International Nuclear Information System (INIS)

Badajoz, C.; Bataille, C.; Drouet, F.; Schieber, C.

2009-04-01

After having recalled the French legal context related to the missions of experts in radiation protection and of experts in medical radio-physics, as well as to the organization of medical physics and radiation protection, this report proposes a global analysis of the organization noticed in several visited units (in different health establishments in France, Switzerland and Spain) and of their actions regarding workers' and patients' radiation protection. Good practices have been identified and recommendations are made

Evaluation methodology for fixed-site physical protection systems

International Nuclear Information System (INIS)

Bennett, H.A.; Olascoaga, M.T.

1980-01-01

A system performance evaluation methodology has been developed to aid the Nuclear Regulatory Commission (NRC) in the implementation of new regulations designed to upgrade the physical protection of nuclear fuel cycle facilities. The evaluation methodology, called Safeguards Upgrade Rule Evaluation (SURE), provides a means of explicitly incorporating measures for highly important and often difficult to quantify performance factors, e.g., installation, maintenance, training and proficiency levels, compatibility of components in subsystems, etc. This is achieved by aggregating responses to component and system questionaires through successive levels of a functional hierarchy developed for each primary performance capability specified in the regulations, 10 CFR 73.45. An overall measure of performance for each capability is the result of this aggregation process. This paper provides a descripton of SURE

Physical protection in the transport of nuclear materials (Legal aspects of the domestic system)

International Nuclear Information System (INIS)

Novais, F.J.G.

1978-04-01

A study of the physical protection system is made. Emphasis is given to some considerations in the nuclear material transport area, mainly the details of the domestic system, from a juridic pont of view. (Author) [pt

Physical implementation of protected qubits

International Nuclear Information System (INIS)

Douçot, B; Ioffe, L B

2012-01-01

We review the general notion of topological protection of quantum states in spin models and its relation with the ideas of quantum error correction. We show that topological protection can be viewed as a Hamiltonian realization of error correction: for a quantum code for which the minimal number of errors that remain undetected is N, the corresponding Hamiltonian model of the effects of the environment noise appears only in the Nth order of the perturbation theory. We discuss the simplest model Hamiltonians that realize topological protection and their implementation in superconducting arrays. We focus on two dual realizations: in one the protected state is stored in the parity of the Cooper pair number, in the other, in the parity of the flux number. In both cases the superconducting arrays allow a number of fault-tolerant operations that should make the universal quantum computation possible. (key issues reviews)

Physical implementation of protected qubits

Science.gov (United States)

Douçot, B.; Ioffe, L. B.

2012-07-01

We review the general notion of topological protection of quantum states in spin models and its relation with the ideas of quantum error correction. We show that topological protection can be viewed as a Hamiltonian realization of error correction: for a quantum code for which the minimal number of errors that remain undetected is N, the corresponding Hamiltonian model of the effects of the environment noise appears only in the Nth order of the perturbation theory. We discuss the simplest model Hamiltonians that realize topological protection and their implementation in superconducting arrays. We focus on two dual realizations: in one the protected state is stored in the parity of the Cooper pair number, in the other, in the parity of the flux number. In both cases the superconducting arrays allow a number of fault-tolerant operations that should make the universal quantum computation possible.

10 CFR 73.25 - Performance capabilities for physical protection of strategic special nuclear material in transit.

Science.gov (United States)

2010-01-01

... strategic special nuclear material in transit. 73.25 Section 73.25 Energy NUCLEAR REGULATORY COMMISSION... Transit § 73.25 Performance capabilities for physical protection of strategic special nuclear material in transit. (a) To meet the general performance objective and requirements of § 73.20 an in-transit physical...

Nuclear material control and accounting safeguards in the United States

International Nuclear Information System (INIS)

Woltermann, H.A.; Rudy, C.R.; Rakel, D.A.; DeVer, E.A.

1982-01-01

Material control and accounting (MC and A) of special nuclear material (SNM) must supplement physical security to protect SNM from unlawful use such as terrorist activities. This article reviews MC and A safeguards of SNM in the United States. The following topics are covered: a brief perspective and history of MC and A safeguards, current MC and A practices, measurement methods for SNM, historical MC and A performance, a description of near-real-time MC and A systems, and conclusions on the status of MC and A in the United States

18 CFR 701.311 - Accounting for disclosures.

Science.gov (United States)

2010-04-01

... ORGANIZATION Protection of Privacy § 701.311 Accounting for disclosures. (a) Maintenance of an accounting. (1...) the name and address of the person or agency to whom the disclosure was made. (3) Accountings prepared... longer, after the disclosure for which the accounting is made. (b) Access to accounting. (1) Except for...

Unintended consequences of changing accounting standards: the case of fair value accounting and mandatory dividends

NARCIS (Netherlands)

Goncharov, I.; van Triest, S.

2014-01-01

A growing body of literature investigates the interaction of changes in accounting standards with institutions such as investor protection laws and corporate governance mechanisms. We examine the unintended consequences of fair value accounting in determining mandated preferred dividends. We study

Decree-Law No. 375/90 of 10 November 1990 designating the competent national authority for the physical protection of nuclear material

International Nuclear Information System (INIS)

1990-01-01

This Decree-Law designates, in accordance with the Convention on the Physical Protection of Nuclear Material, the Protection and Nuclear Safety Bureau (GPSN) of the Ministry of the Environment and Natural Resources as the national competent authority in relation to physical protection matters. Accordingly, the import, manufacture, possession, purchase, sale or transfer of nuclear material, as well as its transport, are subject to prior authorisation by the GPSN [fr

National Radiological Protection Board accounts 1992-93

Energy Technology Data Exchange (ETDEWEB)

1993-12-02

These accounts show the income and expenditure for the year ended 31 March 1993 and balance sheet as at 31 March 1993, together with the report of the comptroller and auditor general thereon. (In continuation of House of Commons Paper No. 167 of 1991-92). (author).

National Radiological Protection Board accounts 1992-93

International Nuclear Information System (INIS)

1993-01-01

These accounts show the income and expenditure for the year ended 31 March 1993 and balance sheet as at 31 March 1993, together with the report of the comptroller and auditor general thereon. (In continuation of House of Commons Paper No. 167 of 1991-92). (author)

Protective effects of physical exercise on MDMA-induced cognitive and mitochondrial impairment.

Science.gov (United States)

Taghizadeh, Ghorban; Pourahmad, Jalal; Mehdizadeh, Hajar; Foroumadi, Alireza; Torkaman-Boutorabi, Anahita; Hassani, Shokoufeh; Naserzadeh, Parvaneh; Shariatmadari, Reyhaneh; Gholami, Mahdi; Rouini, Mohammad Reza; Sharifzadeh, Mohammad

2016-10-01

Debate continues about the effect of 3, 4-methylenedioxymethamphetamine (MDMA) on cognitive and mitochondrial function through the CNS. It has been shown that physical exercise has an important protective effect on cellular damage and death. Therefore, we investigated the effect of physical exercise on MDMA-induced impairments of spatial learning and memory as well as MDMA effects on brain mitochondrial function in rats. Male wistar rats underwent short-term (2 weeks) or long-term (4 weeks) treadmill exercise. After completion of exercise duration, acquisition and retention of spatial memory were evaluated by Morris water maze (MWM) test. Rats were intraperitoneally (I.P) injected with MDMA (5, 10, and 15mg/kg) 30min before the first training trial in 4 training days of MWM. Different parameters of brain mitochondrial function were measured including the level of ROS production, mitochondrial membrane potential (MMP), mitochondrial swelling, mitochondrial outermembrane damage, the amount of cytochrome c release from the mitochondria, and ADP/ATP ratio. MDMA damaged the spatial learning and memory in a dose-dependent manner. Brain mitochondria isolated from the rats treated with MDMA showed significant increase in ROS formation, collapse of MMP, mitochondrial swelling, and outer membrane damage, cytochrome c release from the mitochondria, and finally increased ADP/ATP ratio. This study also found that physical exercise significantly decreased the MDMA-induced impairments of spatial learning and memory and also mitochondrial dysfunction. The results indicated that MDMA-induced neurotoxicity leads to brain mitochondrial dysfunction and subsequent oxidative stress is followed by cognitive impairments. However, physical exercise could reduce these deleterious effects of MDMA through protective effects on brain mitochondrial function. Copyright © 2016 Elsevier Inc. All rights reserved.

Coordination Between the HEU Transparency Program and the Material Protection, Control and Accountability Program

International Nuclear Information System (INIS)

Glaser, J.; Hernandez, J.; Dougherty, D.; Bieniawski, A.; Cahalane, P.; Mastal, E.

2000-01-01

DOE sponsored programs such as Material Protection Control and Accountability (MPC and A) and implementation of the Highly-Enriched Uranium (HEU) Transparency Program send US personnel into Russian nuclear facilities and receive Russian representatives from these programs. While there is overlap in the Russian nuclear facilities visited by these two programs, there had not been any formal mechanism to share information between them. Recently, an MPC and A/HEU Working Group was developed to facilitate the sharing of appropriate information and to address concerns expressed by Minatom and Russian facility personnel such as US visit scheduling conflicts. This paper discusses the goals of the Working Group and ways it has helped to allow the programs to work more efficiently with the Russian facilities

The implementation of nuclear security program and the improvement of physical protection in Indonesia: progress and challenges

International Nuclear Information System (INIS)

Khairul

2009-01-01

facilities. The nuclear material and its installation is potential target in the facilities so that they needed physical protection measures in prevention and protection of nuclear material and radioactive source against theft and sabotage. The implementation of physical protection of nuclear material and radioactive sources in Indonesia complied with the international instruments such as the Convention of the Physical Protection on Nuclear Material and Facilities, amended on July 2005, and INFCIRC/225/Rev. 4, (corrected), the physical protection of nuclear material and nuclear facilities, June 1999. The application of nuclear energy for power program generation involve in the management of nuclear materials and other radioactive substance. According to international regulation and convention, an effective physical protection system is needed to protect nuclear materials and its facilities against theft and sabotage for both non-proliferation and radiation safety purpose. Further to implementation of the IAEA nuclear security program in the region, Indonesia received two nuclear security services, IPPAS and INSServ mission. Based on the expert mission recommendation, therefore Indonesia improved their physical protection system on nuclear material and facilities against theft and sabotage. One thing that should be considered by the Government of Indonesia is human resource development programmes. So far, some effort has developed to enhance the knowledge of the employee who deals with nuclear material and radioactive substances. It still needed to increase the awareness in particular to personal and other related agencies as well. The Department of Energy's National Nuclear Security Administration discussed security assistance with Indonesia's National Nuclear Energy Agency, BATAN. These upgrades not only reduced the threat of theft at the three research reactors, but also provided local physical protection expertise to use during the concept, design, and operation of

Evolution of the physical protection and control of nuclear materials in Brazil

International Nuclear Information System (INIS)

Paschoa, A.S.; Renha, G.; Mafra, O.Y.

2005-01-01

Full text: Brazil started protecting its nuclear materials soon after the end of the World War II, when the Combined Development Trust intended to control the world supply of uranium and thorium. This happened in 1944, but on December 27, 1946, an amendment to the report of Committee II of the United Nations established that the international ownership of the unexplored uranium and thorium would not be mandatory. Brazil nationalized its thorium and uranium reserves in 1951. The Brazil-Germany agreement signed in 1975 enhanced the need for Brazilian nuclear safeguards and security. The physical protection (PP) and control of nuclear materials (CNM) became activities under the supervision of the Brazilian military forces. The System for Protection of the Brazilian Nuclear Program (SIPRON), established on 7 October 1980, took over the responsibilities for PP and other aspects of the Brazilian nuclear program. The central organ of SIPRON was the Brazilian National Security Council (CSN). The Brazilian Nuclear Energy Commission (CNEN) was in charge of coordinating, among others, the PP sector. Earlier that year - on 3 March 1980 - the Convention on the Physical Protection of Nuclear Material (CPPNM) was signed simultaneously in New York and Vienna. The Brazilian congress approved the CPPNM on 27 November 1984, and the Brazilian government deposited the ratification letter on 17 October 1985. On 16 April 1991 the Brazilian government issued a decree to enforce the CPPNM in the Brazilian territory. CNEN published the regulatory documents NE - 2.01 on 19 April 1996, and NN - 2.02 on 21 September 1999 for PP, and CNM, respectively. CNEN has the ultimate responsibility to enforce these regulations. The operational aspects of PP and CNM in Brazil are still improving. Potential nuclear terrorism for example needs to be examined. Activities concerning training personnel and implementing PP and CNM will be described in the paper. (author)

Material Protection, Control, and Accountancy (MPC and A) Sustainability

International Nuclear Information System (INIS)

Baumann, Mark; Farmer, James; Haase, Michael; Mann, Greg; Soo Hoo, Mark; Toth, William

1999-01-01

To date, the Department of Energy's (DOE) Material Protection, Control, and Accountancy (MPC and A) program has assisted in the implementation of operational site-wide MPC and A systems at several nuclear facilities in Russia. Eleven sites from the civilian sector have completed the site-wide installations and two have completed sub-site installations. By the end of 1999, several additional sites will have completed site-wide and sub-site system installations through DOE assistance. the effort at the completed sites has focused primarily on the design, integration, and installation of upgraded MPC and A systems. In most cases, little work has been performed to ensure that the installed systems will be sustained. Because of concerns that the installed systems would not be operated in the future, DOE established a sustainability pilot program involving the 11 sites. The purpose of DOE's MPC and A Sustainability Program is to ensure that MPC and A upgrades installed at sites in Russia are effective and will continue to operate over the long term. The program mission is to work with sites where rapid upgrades have been completed to cultivate enduring and consistent MPC and A practices. The program attempts to assist the Russian sites to develop MPC and A organizations that will operate, maintain, and continue to improve the systems and procedures. Future assistance will strive to understand and incorporate culturally sensitive approaches so that the sites take ownership for all MPC and A matters. This paper describes the efforts of the sustainability program to date

Ordinance on the Implementation of Atomic Safety and Radiation Protection

International Nuclear Information System (INIS)

1984-01-01

In execution of the new Atomic Energy Act the Ordinance on the Implementation of Atomic Safety and Radiation Protection was put into force on 1 February 1985. It takes into account all forms of peaceful nuclear energy and ionizing radiation uses in nuclear installations, irradiation facilities and devices in research, industries, and health services, and in radioactive isotope production and laboratories. It covers all aspects of safety and protection and defines atomic safety as nuclear safety and nuclear safeguards and physical protection of nuclear materials and facilities, whereas radiation protection includes the total of requirements, measures, means and methods necessary to protect man and the environment from the detrimental effects of ionizing radiation. It has been based on ICRP Recommendation No. 26 and the IAEA's Basic Safety Standards and supersedes the Radiation Protection Ordinance of 1969

Proliferation resistance and physical protection working group: methodology and applications

International Nuclear Information System (INIS)

Bari, Robert A.; Whitlock, Jeremy J.; Therios, Ike U.; Peterson, P.F.

2012-01-01

We summarize the technical progress and accomplishments on the evaluation methodology for proliferation resistance and physical protection (PR and PP) of Generation IV nuclear energy systems. We intend the results of the evaluations performed with the methodology for three types of users: system designers, program policy makers, and external stakeholders. The PR and PP Working Group developed the methodology through a series of demonstration and case studies. Over the past few years various national and international groups have applied the methodology to nuclear energy system designs as well as to developing approaches to advanced safeguards.

PROLIFERATION RESISTANCE AND PHYSICAL PROTECTION WORKING GROUP: METHODOLOGY AND APPLICATIONS

Energy Technology Data Exchange (ETDEWEB)

Bari R. A.; Whitlock, J.; Therios, I.U.; Peterson, P.F.

2012-11-14

We summarize the technical progress and accomplishments on the evaluation methodology for proliferation resistance and physical protection (PR and PP) of Generation IV nuclear energy systems. We intend the results of the evaluations performed with the methodology for three types of users: system designers, program policy makers, and external stakeholders. The PR and PP Working Group developed the methodology through a series of demonstration and case studies. Over the past few years various national and international groups have applied the methodology to nuclear energy system designs as well as to developing approaches to advanced safeguards.

Factors influencing accounting conservatism in banks: the UAE case

Directory of Open Access Journals (Sweden)

Magdi El-Bannany

2017-06-01

Full Text Available The purpose of this study is to determine the factors influencing the accounting conservatism for banks in the UAE over the period 2006-2013. Design/methodology/approach – Multiple regression analysis is used to test the relationship between accounting conservatism as a dependent variable and the independent variables intellectual capital performance, market structure, level of protection against risk, bank size, and bank profitability. The results indicate that intellectual capital performance, market structure, bank size, the level of protection against risk and bank profitability have significant impact on the accounting conservatism for banks in the UAE. These results might help the banking and accounting regulators to address the factors affecting accounting conservatism. This study adds to the literature on the determinants of accounting conservatism in banks. In particular, it tests whether the new theories of intellectual capital performance, market structure and level of protection against risk have an impact on accounting conservatism in the banking industry in the UAE.

Evaluating physical protection systems of licensed nuclear facilities using systems engineered inspection guidance

International Nuclear Information System (INIS)

Bradley, R.T.; Olson, A.W.; Rogue, F.; Scala, S.; Richard, E.W.

1980-01-01

The Lawrence Livermore National Laboratory (LLNL) and the US Nuclear Regulatory Commission (NRC) Office of Nuclear Regulatory Research (RES) have applied a systems engineering approach to provide the NRC Office of Inspection and Enforcement (IE) with improved methods and guidance for evaluating the physical protection systems of licensed nuclear facilities

Yugoslavia: Act of 21 November 1984 on radiation protection and the safe use of nuclear energy

International Nuclear Information System (INIS)

1985-01-01

This Act which entered into force on 1 December 1984 repeals the 1976 Act on Protection against Ionizing Radiation and regulates most of the peaceful uses of nuclear energy and radiation protection in Yugoslavia. The Act lays down the licensing procedure for nuclear installations and covers safety-related questions in connection with standards, technical criteria etc. It also takes into account several areas regulated at international level, namely safeguards and physical protection of nuclear material. (NEA) [fr

ON HEALTH PROTECTION AND HEALTH RELATED PHYSICAL CULTURE TRAININGS OF FIRST YEAR STUDENTS

Directory of Open Access Journals (Sweden)

V.G. Fotynyuk

2017-01-01

Full Text Available Purpose: to assess health protection and health related physical culture trainings of first year students. Material: in the research first year students (n=121; 86 boys and 35girls of age 16 - 19 years, participated. Results: components of students’ individual health were found. Situation with health related physical culture trainings, ensuring students’ sound health and optimal functional potentials of their organisms were determined. It was found that leading role shall be played by formation of health world vision values, knowledge about formation of practical skills in healthy life style. Motivation tendency for realization of intentions and practicing of health related physical culture trainings were found in students. Conclusions: the received results prove students’ tendency to pay insufficient attention to individual health. It was found that health related physical culture trainings require modern renewal of education’s content, forms and methods of physical education. The basis of such trainings shall be health related orientation.

Accounting for environmental and social sustainability

OpenAIRE

Mejia Soto, Eutimio; Vargas Marín, Luis Alberto

2012-01-01

Traditionally, accounting has been conceived of as a discipline of economic nature, limited to the protection of the investor’s capital and as determinant factor to calculate taxes. New accounting is developing as a social science that evaluates the management of the organization in the generation and sustainability of the different forms of wealth that it controls. From this view, a series of properties in the protection of an entity’s patrimony is established, in which the economic interest...

Relation of body mass index and body fat mass for Spanish university students, taking into account leisure-time physical activity.

Science.gov (United States)

Molina-García, Javier; Castillo, Isabel; Pablos, Carlos; Queralt, Ana

2009-04-01

The objective of this cross-sectional study was to analyze the relation of Body Mass Index with body fat mass while taking into account the amount of leisure-time physical activity for 299 male university students. Body fat mass was measured by bioelectrical impedance analysis. An estimation of energy expenditure in leisure-time physical activity in metabolic equivalents (METs) was obtained so participants were divided into six activity groups by percentile: no physical activity by the first group and participants physically active were divided into five groups by percentiles: 90% group.

System of accounting and control of nuclear materials (MCA) relative to IAEA safeguards and improvement of radioecological situation of the Joint Stock Company ULBA Metallurgical Plant

International Nuclear Information System (INIS)

Kuznetsov, B.; Khadeev, V.; Antonov, N.; Gradelnikov, K.

1996-01-01

Following goals must be accomplished following this Project : - Develop computerized and automated MCA data system; - Provide up-to-date and reliable accounting and control of availability and transfer of nuclear materials, detect loss or theft of nuclear materials; - Improve book keeping of nuclear materials, provide paperwork for raw materials and finished products sales and purchase control, process nuclear materials shipment data; - Reduce sampling error and to obtain precise measure of nuclear materials to obtain ESADRA target values; - Thorium concentrates transfer preliminary released from raw Beryllium to the new storage to prevent environment radiation pollution and obvious fire accidents; - Improve radioecological situation of the territory caused by old storage dismantling and decontamination of site; - Improve accounting, storing and Physical Protection of Thorium Following is the proposal to obtain goals of the Project : - Develop accounting and control systems - Develop basic standards and procedures for MCA system - Develop users specifications of MCA data system - Develop software of MCA data system - Assembly and adjustment of local network at the production facilities - Automated MCA data system personnel training - Develop measurement system - Determination of the mistakes in sampling and measurement of Uranium and isotopes content - Develop the procedures of sampling and measurement of Uranium and isotopes content providing ESADRA target values - Develop measure control program covering scales and analytical equipment and measuring methods - Develop software for measure control program support - Thorium shipment, decontamination and improvement of Physical Protection of Thorium storage - Accounting of Thorium containing materials when transferring to the new storage - Arrange storage decontamination - Develop new systems of Thorium Containment/Surveillance and Physical Protection

Dynamics of indexes of swimming and physical preparedness of students of marine type in the process of physical education and sport taking into account gender differences

Directory of Open Access Journals (Sweden)

Ganchar A.I.

2012-04-01

Full Text Available Purpose of work - to find out the dynamics of indexes of swimming and physical preparedness of students of marine type in the process of physical education and sport taking into account gender differences. 90 students took part in an experiment. Technology of pedagogical control is developed and the estimation of results of forming of skills of swimming is grounded. It is set that forming of skills of swimming for students takes a place under influence of basic physical qualities. Directions of development of physical qualities are rotined on the basis of the dominant motive modes. The most effective motive mode is recommended: systematic on 1-2 of teaching visit obligatory (32 hours and optional (32 hours educational employments.

Accountable disease management of spine pain.

Science.gov (United States)

Smith, Matthew J

2011-09-01

The health care landscape has changed with new legislation addressing the unsustainable rise in costs in the US system. Low-value service lines caring for expensive chronic conditions have been targeted for reform; for better or worse, the treatment of spine pain has been recognized as a representative example. Examining the Patient Protection and Affordable Care Act and existing pilot studies can offer a preview of how chronic care of spine pain will be sustained. Accountable care in an organization capable of collecting, analyzing, and reporting clinical data and operational compliance is forthcoming. Interdisciplinary spine pain centers integrating surgical and medical management, behavioral medicine, physical reconditioning, and societal reintegration represent the model of high-value care for patients with chronic spine pain. Copyright © 2011 Elsevier Inc. All rights reserved.

Role of physics in the role in the development and protection of environment. V.2

International Nuclear Information System (INIS)

1992-01-01

This is volume 2 of the proceedings of the 1992 National Physics Conference held in Cairo Egypt. It contains papers on the role that the physics currently plays in the development and protection of the environment. Some of the topics covered include (1) nuclear power production and the environment, (2) solar power and the environment, (3) crystallography and the environment and (4) hazardous effects of nonionising radiations from household equipment

Safeguards Strategy in Physical Protection System for Nuclear Installation

International Nuclear Information System (INIS)

Ade lndra B; Kasturi; Tatang Eryadi

2004-01-01

Safeguards strategy is directed at efforts of eliminating theft of nuclear materials and sabotage of nuclear installation. For achieving the above objective, it is necessary to set up safeguards strategy in physical protection of nuclear materials and installation. The safeguards strategy starts from anticipated security condition, list of thefts, planning referred to as safeguards planning. Safeguards planning are implemented in safeguards implementation, followed up then by evaluation. Results of evaluation are equipped with results of safeguards survey already developed. Safeguards' planning is made from these results and serve as guidelines for next safeguards implementation and is repeated to form a safeguard cycle. One safeguard cycle is made on a periodical basis, at least annually. (author)

Evaluation of effectiveness of physical protection systems at nuclear facilities in the Slovak Republic

International Nuclear Information System (INIS)

Stefulova, A.

2001-01-01

This paper contains a short presentation of the state supervision in approach to the evaluation of physical protection systems at the nuclear facilities as one kind of measure used to prevent combat illicit trafficking of nuclear and other radioactive materials in the Slovak Republic. (author)

Safeguarding nuclear materials in the former Soviet Republics through computerized materials protection, control and accountability

International Nuclear Information System (INIS)

Roumiantsev, A.N.; Ostroumov, Y.A.; Whiteson, R.; Seitz, S.L.; Landry, R.P.; Martinez, B.J.; Boor, M.G.; Anderson, L.K.; Gary, S.P.

1997-01-01

The threat of nuclear weapons proliferation is a problem of global concern. International efforts at nonproliferation focus on preventing acquisition of weapons-grade nuclear materials by unauthorized states, organizations, or individuals. Nonproliferation can best be accomplished through international cooperation in the application of advanced science and technology to the management and control of nuclear materials. Computerized systems for nuclear material protection, control, and accountability (MPC and A) are a vital component of integrated nuclear safeguards programs. This paper describes the progress of scientists in the United States and former Soviet Republics in creating customized, computerized MPC and A systems. The authors discuss implementation of the Core Material Accountability System (CoreMAS), which was developed at Los Alamos National Laboratory by the US Department of Energy and incorporates, in condensed and integrated form, the most valuable experience gained by US nuclear enterprises in accounting for and controlling nuclear materials. The CoreMAS approach and corresponding software package have been made available to sites internationally. CoreMAS provides methods to evaluate their existing systems and to examine advantages and disadvantages of customizing CoreMAS or improving their own existing systems. The sites can also address crucial issues of software assurance, data security, and system performance; compare operational experiences at sites with functioning computerized systems; and reasonably evaluate future efforts. The goal of the CoreMAS project is to introduce facilities at sites all over the world to modern international MPC and A practices and to help them implement effective, modern, computerized MPC and A systems to account for their nuclear materials, and thus reduce the likelihood of theft or diversion. Sites are assisted with MPC and A concepts and the implementation of an effective computerized MPC and A system

INTEGRATION OF GREEN ACCOUNTING INTO ROMANIAN ACCOUNTING SYSTEM

Directory of Open Access Journals (Sweden)

Mihaela Ungureanu

2012-03-01

Full Text Available The aim of this paper is to present the concept of green accounting, its emergence at an international level, its entry in the Romanian economic environment and, especially, the way it is understood and applied in Romania. It seeks the awareness of managers and accounting professionals on this issue, especially in the context of growing pressure for environmental protection, from the general public, media and investors. An essential role is held by the accounting profession and its relevant legislation, through the elaboration of standards and guidelines in order to support the efforts of changing the mentality of business environment. The companies are also concerned for the future and not only for the present and they understand that environmental investments are not unnecessary expenses that burden the activities, but long-term profits prerequisites.Understanding the concept is difficult without an agreement on its definition. Specialized literature presents different definitions, each author with his own interpretation and vision. This is why professional accountants' reluctance to adopt new ideas and practices of green accounting, this being an unknown territory to them and difficult to entered.

Achievements and questions in the accountability of nuclear materials and their verification for safeguards purposes

International Nuclear Information System (INIS)

Deron, S.

1990-01-01

A very accurate accountability of nuclear materials is required throughout the industrial nuclear fuel cycle for technical reasons and safety purposes but also for commercial, physical protection and safeguards objectives. The present note intends to illustrate with a few samples the performance presently achieved and the major questions which the analysts are facing in these areas. The examples taken concern the accountability of feed and product materials at LWR nuclear fuel fabrication plants and spent fuel reprocessing plants. They were selected because they constitute major components of the flow and inventory of the nuclear fuel materials at key measurement points in nuclear industry. The factors limiting the quality of the assays and accountability of these industrial materials and some observations regarding the need and use of reference materials and quality control programmes in support of accurate accounting are presented. 7 refs

Evaluation of physical-protection elements for interior applications

International Nuclear Information System (INIS)

Scott, S.H.

1983-01-01

Considerable emphasis has been given in recent years to the threat of sabotage by an insider at nuclear facilities. This threat is inherently different from the outsider threat of theft or sabotage because of the insiders' unique knowledge and access to vital material and equipment. Thus, special safeguards elements are needed in order to counter the insider threat. In addition, insider physical protection system elements must be compatible with the operations, safety, and maintenance programs at the facility. To help identify elements which meet these needs, field evaluations were performed on an interior access control system, piping sensors, interior video motion detectors, and valve monitoring devices. These elements were tested in a realistic operating environment and both technical and operational evaluation data were obtained. Safeguards element descriptions and the results of the operational tests and evaluations are outlined

MPC and A upgrades at the Institute of Theoretical and Experimental Physics (ITEP)

International Nuclear Information System (INIS)

Haase, M.; Smarto, C.; Baumann, M.

1998-01-01

Materials Protection, Control and Accounting (MPC and A) equipment upgrades are complete at the Institute of Theoretical and Experimental Physics (ITEP), a site that has significant quantities of weapons-potential nuclear materials. Cooperative work was initiated at this Moscow facility as a part of the US-Russian program to upgrade MPC and A systems. An initial site visit and assessment were conducted in September 1996 to establish communication between ITEP, the US Department of Energy (DOE), and participating US National Laboratories. Subsequently, an agreement was reached to develop two master plans for MPC and A upgrades. Los Alamos National Laboratory (LANL) and Oak Ridge National Laboratory (ORNL) assisted in developing a plan for Material Control and Accounting (MC and A) upgrades, and Sandia National Laboratories (SNL) assisted in developing a plan for Physical Protection System (PPS) upgrades. The MC and A plan included MC and A training, a mass measurement program, nondestructive assay instrumentation, item identification (bar coding), physical inventory taking, portal and hand-held nuclear material monitors, and a nuclear materials accounting system. The PPS plan included basic PPS design training, Central Alarm Station (CAS) relocation and equipment upgrades, a site and critical-building access control system, intrusion detection, alarm assessment, and guard force communications

Modifying attitude and intention toward regular physical activity using protection motivation theory: a randomized controlled trial.

Science.gov (United States)

Mirkarimi, Kamal; Eri, Maryam; Ghanbari, Mohammad R; Kabir, Mohammad J; Raeisi, Mojtaba; Ozouni-Davaji, Rahman B; Aryaie, Mohammad; Charkazi, Abdurrahman

2017-10-30

We were guided by the Protection Motivation Theory to test the motivational interviewing effects on attitude and intention of obese and overweight women to do regular physical activity. In a randomized controlled trial, we selected using convenience sampling 60 overweight and obese women attending health centres. The women were allocated to 2 groups of 30 receiving a standard weight-control programme or motivational interviewing. All constructs of the theory (perceived susceptibility, severity, self-efficacy and response efficacy) and all anthropometric characteristics (except body mass index) were significantly different between the groups at 3 study times. The strongest predictors of intention to do regular physical exercise were perceived response efficacy and attitude at 2- and 6-months follow-up. We showed that targeting motivational interviewing with an emphasis on Protection Motivation Theory constructs appeared to be beneficial for designing and developing appropriate intervention to improve physical activity status among women with overweight and obesity.

Physical protection systems and Y2K issue in the Slovak Republic

International Nuclear Information System (INIS)

Bezak, S.

1999-01-01

After political and economical changes in the end of eighties the utility operating nuclear power plants in the Slovak Republic (SE, a.s.) decided to upgrade physical protection system of nuclear installations. System based on guards army police) was replaced by sophisticated one comprising barriers with detection and controlled by computers. Due to date format used by control software the utility is facing a problems approaching the year 2000. (author)

Impacts on power reactor health physics programs

International Nuclear Information System (INIS)

Meyer, B.A.

1991-01-01

The impacts on power reactor health physics programs form implementing the revised 10 CFR Part 20 will be extensive and costly. Every policy, program, procedure and training lesson plan involving health physics will require changes and the subsequent retraining of personnel. At each power reactor facility, hundreds of procedures and thousands of people will be affected by these changes. Every area of a power reactor health physics program will be affected. These areas include; ALARA, Respiratory Protection, Exposure Control, Job Coverage, Dosimetry, Radwaste, Effluent Accountability, Emergency Planning and Radiation Worker Training. This paper presents how power reactor facilities will go about making these changes and gives possible examples of some of these changes and their impact on each area of power reactor health physics program

U.S./Russian lab-to-lab materials protection, control and accounting program efforts at the Institute of Inorganic Materials

International Nuclear Information System (INIS)

Ruhter, W.D.; Kositsyn, V.; Rudenko, V.; Siskind, B.; Bieber, A.; Hoida, H.; Augustson; Ehinger, M.; Smith, B.W.

1996-01-01

The All-Russian Scientific Research Institute of Inorganic Materials (VNIINM) performs research in nuclear power reactor fuel,m spent fuel reprocessing and waste management, materials science of fissionable and reactor structural materials, metallurgy, superconducting materials, and analytical sciences. VNIINM supports the Ministry of Atomic Energy of the Russian Federation (MINATOM) in technologies for fabrication and processing of nuclear fuel. As a participant in the U. S./Russian Lab-to-Lab nuclear materials protection, control and accounting (MPC ampersand A) program, VNIINM is providing evaluation, certification, and implementation of measurement methods for such materials. In 1966, VNIINM will be working with Brookhaven staff in developing and documenting material control and accounting requirements for nuclear materials in bulk form, Livermore and Los Alamos staff in testing and evaluating gamma-ray spectrometry methods for bulk materials, Los Alamos staff in test and evaluation of neutron-coincidence counting techniques, Oak Ridge staff in accounting of bulk materials with process instrumentation, and Pacific Northwest staff on automating VNIINM's coulometric titration system. In addition, VNIINM will develop a computerized accounting system for nuclear material within VNIINM and heir storage facility. This paper describes the status of this work and anticipated progress in 1996

Physical protection of export/import and transportation of nuclear material in the Slovak Republic

International Nuclear Information System (INIS)

Vaclav, J

2002-01-01

Full text: The paper contains short overview about average amount of nuclear materials transported on the territory of the Slovak Republic in a year, and the physical protection of these nuclear materials. There are several types of transportation and export/import of nuclear materials in the SR: fresh fuel import; import of other unirradiated nuclear materials (e.g. depleted uranium, natural uranium); export of unirradiated nuclear materials (e.g. natural uranium); internal transportation of fresh fuel; internal transportation of other unirradiated nuclear materials; internal transportation of spent fuel. The main objective of the nuclear regulatory authority SR is to supervise observation of the national legislation as follows: the act no. 130 / 1998 on peaceful use of nuclear energy; UJD SR's regulation no. 186/1999 which details the physical protection of the nuclear facilities, nuclear materials, and radioactive waste (following requirements of INFCIRC 225 / Rev. 4); UJD SR's regulation no. 284 / 1999 which details conditions of nuclear material and radioactive wastes transportation. (author)

Design of forest rent accounting

Directory of Open Access Journals (Sweden)

T.S. Osadcha

2016-12-01

Full Text Available The urgent task for the effective functioning of the national economy is the need to reflect income from the use of forest resources in accounting, which will allow management personnel to prove the effectiveness of environmental protection measures, to assess the amount of expenses taken during restoration and protection of forest resources. The study aims at identifying characteristics of forest rent to determine the amount and its reflection in the accounting for its management. The author understands a forest rent as the income received from the owner of forest resources. The above procedure for determining the amount of forest rent can be used to display it in the accounting. A forest rent is a type of business income, so for its reflection in the accounting it is proposed to open the analytical accounts to account 79 named «Financial results». To determine the amount of forest rent and its reflection in the accounting the author suggests the calculation form of a forest rent. In order to manage the size of a forest rent and expenses incurred to obtain it the author proposes to use the information from the developed report about the forest rent formation. The displaying forest rents in accounting will provide accurate and deep information to the management about the revenue and assets of a company. The rational use of forest resources and accounting reflection of a forest rent will strengthen control over the influence of human activity on natural resources and keep the conception of sustainable development.

Physics for radiation protection. 3. upd. ed.

Energy Technology Data Exchange (ETDEWEB)

Martin, James E.

2013-09-01

A highly practical resource for health physicists and other professionals in radiation protection. This third edition has been completely revised and updated with an emphasis on basic concepts as they apply to radiation issues such as the incident at the Fukushima-Daichi plant in Japan. Designed for readers with limited as well as basic science backgrounds, the book presents thorough and up-to-date explanations of radiation physics and the major concepts that underpin it. Extensive discussion is provided of radioactivity, including sources, materials and decay schemes for about 100 of the most common radionuclides encountered by practitioners. The text emphasizes practical calculations for radiation sources and levels in the workplace and the environment, and presents methods, including shielding, for modifying them. Comprehensive appendices and more than 400 figures are provided for such calculations; these are based on current resource data. Excerpts from the Chart of the Nuclides, activation cross sections, fission yields, fission-product chains, photon attenuation coefficients, and nuclear masses are also provided. Real-world examples and exercises demonstrate concepts and their use.

Shaping Social Protection in Africa : National Transfer Accounts ...

International Development Research Centre (IDRC) Digital Library (Canada)

Researchers will construct age-specific economic accounts known as national ... affect poverty reduction efforts, particularly the design of social security. ... of its 2017 call for proposals to establish Cyber Policy Centres in the Global South.

Physical protection of shipments of irradiated reactor fuel; Interim guidance. Regulatory report

International Nuclear Information System (INIS)

1980-06-01

During May, 1979, the U.S. Nuclear Regulatory Commission approved for issuance in effective form new interim regulations for strengthening the protection of spent fuel shipments against sabotage and diversion. The new regulations were issued without benefit of public comment, but comments from the public were solicited after the effective date. Based upon the public comments received, the interim regulations were amended and reissued in effective form as a final interim rule in May, 1980. The present document supersedes a previously issued interim guidance document, NUREG-0561 (June, 1979) which accompanied the original rule. This report has been revised to conform to the new interim regulations on the physical protection of shipments of irradiated reactor fuel which are likely to remain in effect until the completion of an ongoing research program concerning the response of spent fuel to certain forms of sabotage, at which time the regulations may be rescinded, modified or made permanent, as appropriate. This report discusses the amended regulations and provides a basis on which licensees can develop an acceptable interim program for the protection of spent fuel shipments

Catalog of physical protection equipment. Book 1: Volume I. Barriers and structural components

International Nuclear Information System (INIS)

Haberman, W.

1977-06-01

A catalog of commercially available physical protection equipment has been prepared for use by the U.S. Nuclear Regulatory Commission (NRC). Included is information on barrier structures and equipment, interior and exterior intrusion detection sensors, entry (access) control devices, surveillance and alarm assessment equipment, contraband detection sensors, automated response equipment, general purpose displays and general purpose communications, with one volume devoted to each of these eight areas. For each item of equipment the information included consists of performance, physical, cost and supply/logistics data. The entire catalog is contained in three notebooks for ease in its use by licensing and inspection staff at NRC

Catalog of physical protection equipment. Book 3: Volume VII. General purpose display components

International Nuclear Information System (INIS)

1977-06-01

A catalog of commercially available physical protection equipment has been prepared under MITRE contract AT(49-24)-0376 for use by the U. S. Nuclear Regulatory Commission (NRC). Included is information on barrier structures and equipment, interior and exterior intrusion detection sensors, entry (access) control devices, surveillance and alarm assessment equipment, contraband detection sensors, automated response equipment, general purpose displays and general purpose communications, with one volume devoted to each of these eight areas. For each item of equipment the information included consists of performance, physical, cost and supply/logistics data. The entire catalog is contained in three notebooks for ease in its use by licensing and inspection staff at NRC

Using virtual reality in the training of security staff and evaluation of physical protection barriers in nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Augusto, Silas C.; Mol, Antonio C.A.; Mol, Pedro C.; Sales, Douglas S. [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil)], e-mail: silas@ien.gov.br, e-mail: mol@ien.gov.br, e-mail: pedro98@gmail.com, e-mail: dsales@ien.gov.br

2009-07-01

The physical security of facilities containing radioactive objects, an already important matter, now has a new aggravating factor: the existence of groups intending to obtain radioactive materials for the purpose of intentionally induce radioactive contamination incidents, as for example the explosion of dirty bombs in populated regions, damaging both people and environment. In this context, the physical security of such facilities must be reinforced so to reduce the possibilities of such incidents. This paper presents a adapted game engine used as a virtual reality system, enabling the modeling and simulation of scenarios of nuclear facilities containing radioactive objects. In these scenarios, the physical protection barriers, as fences and walls, are simulated along with vigilance screens. Using a computer network, several users can participate simultaneously in the simulation, being represented by avatars. Users can play the roles of both invaders and security staff. The invaders have as objective to surpass the facility's physical protection barriers to steal radioactive objects and flee. The security staff have as objective to prevent and stop the theft of radioactive objects from the facility. The system can be used to analysis simulated scenarios and train vigilance/security staff. A test scenario was already developed and used, and the preliminary tests had satisfactory results, as they enabled the evaluation of the physical protection barriers of the virtual facility, and the training of those who participated in the simulations in the functions of a security staff. (author)

Using virtual reality in the training of security staff and evaluation of physical protection barriers in nuclear facilities

International Nuclear Information System (INIS)

Augusto, Silas C.; Mol, Antonio C.A.; Mol, Pedro C.; Sales, Douglas S.

2009-01-01

The physical security of facilities containing radioactive objects, an already important matter, now has a new aggravating factor: the existence of groups intending to obtain radioactive materials for the purpose of intentionally induce radioactive contamination incidents, as for example the explosion of dirty bombs in populated regions, damaging both people and environment. In this context, the physical security of such facilities must be reinforced so to reduce the possibilities of such incidents. This paper presents a adapted game engine used as a virtual reality system, enabling the modeling and simulation of scenarios of nuclear facilities containing radioactive objects. In these scenarios, the physical protection barriers, as fences and walls, are simulated along with vigilance screens. Using a computer network, several users can participate simultaneously in the simulation, being represented by avatars. Users can play the roles of both invaders and security staff. The invaders have as objective to surpass the facility's physical protection barriers to steal radioactive objects and flee. The security staff have as objective to prevent and stop the theft of radioactive objects from the facility. The system can be used to analysis simulated scenarios and train vigilance/security staff. A test scenario was already developed and used, and the preliminary tests had satisfactory results, as they enabled the evaluation of the physical protection barriers of the virtual facility, and the training of those who participated in the simulations in the functions of a security staff. (author)

Accounting for biological effectiveness in radiological protection

International Nuclear Information System (INIS)

Dennis, J.A.

1989-01-01

Relative biological effectiveness (RBE) presents a practical problem to radiological protection when attempts are made to ensure that the assessed risks from different types of radiation and different modes of exposure to radiation are commensurate with one another. Unfortunately, the theoretical understanding of RBE is still in the stage of competing explanations and hypotheses. Furthermore, the division of the concept of dose equivalent into a set of concepts for risk assessment and another set for measurement and control has introduced conflicting requirements of a practical nature that are difficult to resolve. Many of those working in radiobiology and radiation protection have perceived the need to increase the quality factors for photon and neutron radiations. It may be more reasonable to change the quality factors for neutrons than for other radiations. The advantages and disadvantages of different methods for accommodating such changes within the dose-equivalent concepts are to be examined. The method of accommodating such a change that has the least practical disadvantages is to increase the quality factors for all secondary particles produced in tissue by neutron radiations by a constant factor. The only disadvantage would be the perception that the quality factors for these secondary particles were not treated in a consistent fashion for all types of ionising radiation. (author)

Development of computer-based analytical tool for assessing physical protection system

Energy Technology Data Exchange (ETDEWEB)

Mardhi, Alim, E-mail: alim-m@batan.go.id [National Nuclear Energy Agency Indonesia, (BATAN), PUSPIPTEK area, Building 80, Serpong, Tangerang Selatan, Banten (Indonesia); Chulalongkorn University, Faculty of Engineering, Nuclear Engineering Department, 254 Phayathai Road, Pathumwan, Bangkok Thailand. 10330 (Thailand); Pengvanich, Phongphaeth, E-mail: ppengvan@gmail.com [Chulalongkorn University, Faculty of Engineering, Nuclear Engineering Department, 254 Phayathai Road, Pathumwan, Bangkok Thailand. 10330 (Thailand)

2016-01-22

Assessment of physical protection system effectiveness is the priority for ensuring the optimum protection caused by unlawful acts against a nuclear facility, such as unauthorized removal of nuclear materials and sabotage of the facility itself. Since an assessment based on real exercise scenarios is costly and time-consuming, the computer-based analytical tool can offer the solution for approaching the likelihood threat scenario. There are several currently available tools that can be used instantly such as EASI and SAPE, however for our research purpose it is more suitable to have the tool that can be customized and enhanced further. In this work, we have developed a computer–based analytical tool by utilizing the network methodological approach for modelling the adversary paths. The inputs are multi-elements in security used for evaluate the effectiveness of the system’s detection, delay, and response. The tool has capability to analyze the most critical path and quantify the probability of effectiveness of the system as performance measure.

Development of computer-based analytical tool for assessing physical protection system

International Nuclear Information System (INIS)

Mardhi, Alim; Pengvanich, Phongphaeth

2016-01-01

Assessment of physical protection system effectiveness is the priority for ensuring the optimum protection caused by unlawful acts against a nuclear facility, such as unauthorized removal of nuclear materials and sabotage of the facility itself. Since an assessment based on real exercise scenarios is costly and time-consuming, the computer-based analytical tool can offer the solution for approaching the likelihood threat scenario. There are several currently available tools that can be used instantly such as EASI and SAPE, however for our research purpose it is more suitable to have the tool that can be customized and enhanced further. In this work, we have developed a computer–based analytical tool by utilizing the network methodological approach for modelling the adversary paths. The inputs are multi-elements in security used for evaluate the effectiveness of the system’s detection, delay, and response. The tool has capability to analyze the most critical path and quantify the probability of effectiveness of the system as performance measure

Development of computer-based analytical tool for assessing physical protection system

Science.gov (United States)

Mardhi, Alim; Pengvanich, Phongphaeth

2016-01-01

Assessment of physical protection system effectiveness is the priority for ensuring the optimum protection caused by unlawful acts against a nuclear facility, such as unauthorized removal of nuclear materials and sabotage of the facility itself. Since an assessment based on real exercise scenarios is costly and time-consuming, the computer-based analytical tool can offer the solution for approaching the likelihood threat scenario. There are several currently available tools that can be used instantly such as EASI and SAPE, however for our research purpose it is more suitable to have the tool that can be customized and enhanced further. In this work, we have developed a computer-based analytical tool by utilizing the network methodological approach for modelling the adversary paths. The inputs are multi-elements in security used for evaluate the effectiveness of the system's detection, delay, and response. The tool has capability to analyze the most critical path and quantify the probability of effectiveness of the system as performance measure.

40 CFR 73.38 - Closing of accounts.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Closing of accounts. 73.38 Section 73...) SULFUR DIOXIDE ALLOWANCE SYSTEM Allowance Tracking System § 73.38 Closing of accounts. (a) General... close the general account by submitting an allowance transfer, pursuant to § 73.50 and § 73.52...

The physical and mental health of lesbian, gay male, and bisexual (LGB) older adults: the role of key health indicators and risk and protective factors.

Science.gov (United States)

Fredriksen-Goldsen, Karen I; Emlet, Charles A; Kim, Hyun-Jun; Muraco, Anna; Erosheva, Elena A; Goldsen, Jayn; Hoy-Ellis, Charles P

2013-08-01

Based on resilience theory, this paper investigates the influence of key health indicators and risk and protective factors on health outcomes (including general health, disability, and depression) among lesbian, gay male, and bisexual (LGB) older adults. A cross-sectional survey was conducted with LGB older adults, aged 50 and older (N = 2,439). Logistic regressions were conducted to examine the contributions of key health indicators (access to health care and health behaviors), risk factors (lifetime victimization, internalized stigma, and sexual identity concealment), and protective factors (social support and social network size) to health outcomes, when controlling for background characteristics. The findings revealed that lifetime victimization, financial barriers to health care, obesity, and limited physical activity independently and significantly accounted for poor general health, disability, and depression among LGB older adults. Internalized stigma was also a significant predictor of disability and depression. Social support and social network size served as protective factors, decreasing the odds of poor general health, disability, and depression. Some distinct differences by gender and sexual orientation were also observed. High levels of poor general health, disability, and depression among LGB older adults are of major concern. These findings highlight the important role of key risk and protective factors, which significantly influences health outcomes among LGB older adults. Tailored interventions must be developed to address the distinct health issues facing this historically disadvantaged population.

Synthesis of the scientific French speaking days on numerical codes in radiation protection, in radio physics and in dosimetry

International Nuclear Information System (INIS)

Paul, D.; Makovicka, L.; Ricard, M.

2005-01-01

Synthesis of the scientific French speaking days on numerical codes in radiation protection, in radio-physics and in dosimetry. The paper carries the title of 'French speaking' scientific days co-organized on October 2-3, 2003 in Sochaux by the SFRP, SFPM and FIRAM societies. It has for objective to establish the scientific balance sheet of this international event, to give the synthesis of current tendencies in the field of the development and of the use of the numerical codes in radiation protection, in radio-physics and in dosimetry. (author)

Developments in physical dosimetry and radiation protection; Entwicklungen in der physikalischen Dosimetrie im Strahlenschutz

Energy Technology Data Exchange (ETDEWEB)

Fiebich, Martin [Technische Hochschule Mittelhessen, Giessen (Germany). Inst. fuer Medizinische Physik und Strahlenschutz

2017-07-01

In the frame of physical dosimetry new dose units have been defined: the depth personal dose (equivalent dose in 10 mm depth) and the surface personal dose (equivalent dose in 0.07 mm depth). Physical dosimetry is applied for the determination of occupational radiation exposure, the radiation protected area control, the estimation of radiation exposure of patients during radiotherapy, for quality assurance and in research projects and optimization challenges. Developments have appeared with respect to punctual measuring chambers, eye lens dosimetry, OSL (optically stimulated luminescence) dosimetry, real-time dosimetry and Monte Carlo methods. New detection limits of about 1 micro Gy were reached.

Computer programs as accounting object

Directory of Open Access Journals (Sweden)

I.V. Perviy

2015-03-01

Full Text Available Existing approaches to the regulation of accounting software as one of the types of intangible assets have been considered. The features and current state of the legal protection of computer programs have been analyzed. The reasons for the need to use patent law as a means of legal protection of individual elements of computer programs have been discovered. The influence of the legal aspects of the use of computer programs for national legislation to their accounting reflection has been analyzed. The possible options for the transfer of rights from computer programs copyright owners have been analyzed that should be considered during creation of software accounting system at the enterprise. Identified and analyzed the characteristics of computer software as an intangible asset under the current law. General economic characteristics of computer programs as one of the types of intangible assets have been grounded. The main distinguishing features of software compared to other types of intellectual property have been all ocated

Separation – integration – and now …? - An historical perspective on the relationship between German management accounting and financial accounting

OpenAIRE

Brandau, M.; Endenich, C.; Luther, R.; Trapp, R.

2017-01-01

German accounting has traditionally followed a dual ledger approach with strictly separated internal cost accounting, as the basis for management information, and external financial accounting focusing on creditor protection and based on the commercial law. However, the increased adoption of integrated accounting system implies a significant change in the relationship between financial and management accounting systems. We use Hegelian dialectic to trace the historical development of German a...