WorldWideScience

Sample records for accidental drop scenarios

  1. Impact analysis of spent fuel dry casks under accidental drop scenarios

    International Nuclear Information System (INIS)

    Braverman, J.I.; Morante, R.J.; Xu, J.; Hofmayer, C.H.; Shaukat, S.K.

    2003-01-01

    A series of analyses were performed to assess the structural response of spent nuclear fuel dry casks subjected to various handling and on-site transfer events. The results of these analyses are being used by the Nuclear Regulatory Commission (NRC) to perform a probabilistic risk assessment (PRA). Although the PRA study is being performed for a specific nuclear plant, the PRA study is also intended to provide a framework for a general methodology that could also be applied to other dry cask systems at other nuclear plants. The dry cask system consists of a transfer cask, used for handling and moving the multi-purpose canister (MPC) that contains the fuel, and a storage cask, used to store the MPC and fuel on a concrete pad at the site. This paper describes the analyses of the casks for two loading events. The first loading consists of dropping the transfer cask while it is lowered by a crane to a concrete floor at ground elevation. The second loading consists of dropping the storage cask while it is being transferred to the concrete storage pad outdoors. Three dimensional finite element models of the transfer cask and storage cask, containing the MPC and fuel, were utilized to perform the drop analyses. These models were combined with finite element models of the target structures being impacted. The transfer cask drop analyses considered various drop heights for the cask impacting the reinforced concrete floor at ground level. The finite element model of the target included a section of the concrete floor and concrete wall supporting the floor. The storage cask drop analyses evaluated a 30.5 cm (12 in.) drop of the cask impacting three different surfaces: reinforced concrete, asphalt, and gravel. (author)

  2. Postprocessing of Accidental Scenarios by Semi-Supervised Self-Organizing Maps

    Directory of Open Access Journals (Sweden)

    Francesco Di Maio

    2017-01-01

    Full Text Available Integrated Deterministic and Probabilistic Safety Analysis (IDPSA of dynamic systems calls for the development of efficient methods for accidental scenarios generation. The necessary consideration of failure events timing and sequencing along the scenarios requires the number of scenarios to be generated to increase with respect to conventional PSA. Consequently, their postprocessing for retrieving safety relevant information regarding the system behavior is challenged because of the large amount of generated scenarios that makes the computational cost for scenario postprocessing enormous and the retrieved information difficult to interpret. In the context of IDPSA, the interpretation consists in the classification of the generated scenarios as safe, failed, Near Misses (NMs, and Prime Implicants (PIs. To address this issue, in this paper we propose the use of an ensemble of Semi-Supervised Self-Organizing Maps (SSSOMs whose outcomes are combined by a locally weighted aggregation according to two strategies: a locally weighted aggregation and a decision tree based aggregation. In the former, we resort to the Local Fusion (LF principle for accounting the classification reliability of the different SSSOM classifiers, whereas in the latter we build a classification scheme to select the appropriate classifier (or ensemble of classifiers, for the type of scenario to be classified. The two strategies are applied for the postprocessing of the accidental scenarios of a dynamic U-Tube Steam Generator (UTSG.

  3. Respiratuvar depression after accidental nasal ingestion of brimonidine eye drops in infant

    Directory of Open Access Journals (Sweden)

    Ali Gunes

    2016-12-01

    Full Text Available Objectives: Brimonidine tartrate is an alpha-2 agonist used for glaucoma treatment. It can lead to serious poisoning symptoms when misused by children. Case report: In this case report, 3 months-old male patient with severe central nervous system depression and respiratory arrest as a result of accidentally nasal instillation of 1 cc brimonidine tartrate that benefited from mechanic ventilation and naloxone treatment was presented. Conclusion: This case report suggested, that misuse of nasal brimonidine eye drop could result in serious respiratory distress and central nervous system depression. Mechanical ventilation and naloxone administration can be useful for these patients. Keywords: Brimonidine intoxication, Nasal ingestion, Children

  4. Dropped fuel damage prediction techniques and the DROPFU code

    International Nuclear Information System (INIS)

    Mottershead, K.J.; Beardsmore, D.W.; Money, G.

    1995-01-01

    During refuelling, and fuel handling, at UK Advanced Gas Cooled Reactor (AGR) stations it is recognised that the accidental dropping of fuel is a possibility. This can result in dropping individual fuel elements, a complete fuel stringer, or a whole assembly. The techniques for assessing potential damage have been developed over a number of years. This paper describes how damage prediction techniques have subsequently evolved to meet changing needs. These have been due to later fuel designs and the need to consider drops in facilities outside the reactor. The paper begins by briefly describing AGR fuel and possible dropped fuel scenarios. This is followed by a brief summary of the damage mechanisms and the assessment procedure as it was first developed. The paper then describes the additional test work carried out, followed by the detailed numerical modelling. Finally, the paper describes the extensions to the practical assessment methods. (author)

  5. Radiative accidental matter

    Energy Technology Data Exchange (ETDEWEB)

    Sierra, D. Aristizabal [IFPA, Dép. AGO, Université de Liège,Bât B5, Sart Tilman B-4000 Liège 1 (Belgium); Universidad Técnica Federico Santa María - Departamento de Física,Casilla 110-V, Avda. España 1680, Valparaíso (Chile); Simoes, C.; Wegman, D. [IFPA, Dép. AGO, Université de Liège,Bât B5, Sart Tilman B-4000 Liège 1 (Belgium)

    2016-07-25

    Accidental matter models are scenarios where the beyond-the-standard model physics preserves all the standard model accidental and approximate symmetries up to a cutoff scale related with lepton number violation. We study such scenarios assuming that the new physics plays an active role in neutrino mass generation, and show that this unavoidably leads to radiatively induced neutrino masses. We systematically classify all possible models and determine their viability by studying electroweak precision data, big bang nucleosynthesis and electroweak perturbativity, finding that the latter places the most stringent constraints on the mass spectra. These results allow the identification of minimal radiative accidental matter models for which perturbativity is lost at high scales. We calculate radiative charged-lepton flavor violating processes in these setups, and show that μ→eγ has a rate well within MEG sensitivity provided the lepton-number violating scale is at or below 5×10{sup 5} GeV, a value (naturally) assured by the radiative suppression mechanism. Sizeable τ→μγ branching fractions within SuperKEKB sensitivity are possible for lower lepton-number breaking scales. We thus point out that these scenarios can be tested not only in direct searches but also in lepton flavor-violating experiments.

  6. Impact Force Applied on the Spent Nuclear Fuel Disposal Canister that Accidentally Drops and Collides onto the Ground

    International Nuclear Information System (INIS)

    Kwon, Young Joo

    2016-01-01

    In this paper, a mathematical methodology was theoretically studied to obtain the impact force caused by the collision between rigid bodies. This theoretical methodology was applied to compute the impact force applied on the spent nuclear fuel disposal canister that accidentally drops and collides onto the ground. From this study, the impact force required to ensure a structurally safe canister design was theoretically formulated. The main content of the theoretical study concerns the rigid body kinematics and equation of motion during collision between two rigid bodies. On the basis of this study, a general impact theory to compute the impact force caused by the collision between two bodies was developed. This general impact theory was applied to theoretically formulate the approximate mathematical solution of the impact force that affects the spent nuclear fuel disposal canister that accidentally falls to the ground. Simultaneously, a numerical analysis was performed using the computer code to compute the numerical solution of the impact force, and the numerical result was compared with the approximate mathematical solution

  7. The Key-Role of shielding analysis in advanced Candu Fuel bundles nuclear safety improvement for some accidental criticality scenarios

    International Nuclear Information System (INIS)

    Margeanu, C.A.; Rizoiu, A.; Olteanu, G.

    2008-01-01

    The paper aims to present the source term and photon dose rates estimation for advanced Candu fuel bundles in some accidental criticality scenarios. As reference, the Candu standard fuel bundle has been used. The scenarios take into account for a very short-time irradiated or spent fuel bundles for some configurations closed to criticality. In order to estimate irradiated fuel characteristic parameters and radiation doses, the ORNL's SCALE 5 codes Origin-S and Monte Carlo MORSE-SGC have been used. The paper includes the irradiated fuel characteristic parameters comparison for the considered Candu fuel bundles, providing also a comparison between the corresponding radiation doses

  8. Drop Testing Representative Multi-Canister Overpacks

    Energy Technology Data Exchange (ETDEWEB)

    Snow, Spencer D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Morton, Dana K. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-06-01

    The objective of the work reported herein was to determine the ability of the Multi- Canister Overpack (MCO) canister design to maintain its containment boundary after an accidental drop event. Two test MCO canisters were assembled at Hanford, prepared for testing at the Idaho National Engineering and Environmental Laboratory (INEEL), drop tested at Sandia National Laboratories, and evaluated back at the INEEL. In addition to the actual testing efforts, finite element plastic analysis techniques were used to make both pre-test and post-test predictions of the test MCOs structural deformations. The completed effort has demonstrated that the canister design is capable of maintaining a 50 psig pressure boundary after drop testing. Based on helium leak testing methods, one test MCO was determined to have a leakage rate not greater than 1x10-5 std cc/sec (prior internal helium presence prevented a more rigorous test) and the remaining test MCO had a measured leakage rate less than 1x10-7 std cc/sec (i.e., a leaktight containment) after the drop test. The effort has also demonstrated the capability of finite element methods using plastic analysis techniques to accurately predict the structural deformations of canisters subjected to an accidental drop event.

  9. Study for on-line system to identify inadvertent control rod drops in PWR reactors using ex-core detector and thermocouple measures

    International Nuclear Information System (INIS)

    Souza, Thiago J.; Medeiros, Jose A.C.C.; Goncalves, Alessandro C.

    2015-01-01

    Accidental control rod drops event in PWR reactors leads to an unsafe operating condition. It is important to quickly identify the rod to minimize undesirable effects in such a scenario. In this event, there is a distortion in the power distribution and temperature in the reactor core. The goal of this study is to develop an on-line model to identify the inadvertent control rod dropped in PWR reactor. The proposed model is based on physical correlations and pattern recognition of ex-core detector responses and thermocouples measures. The results of the study demonstrated the feasibility of an on-line system, contributing to safer operation conditions and preventing undesirable effects, as its shutdown. (author)

  10. Study for on-line system to identify inadvertent control rod drops in PWR reactors using ex-core detector and thermocouple measures

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Thiago J.; Medeiros, Jose A.C.C.; Goncalves, Alessandro C., E-mail: tsouza@nuclear.ufrj.br, E-mail: canedo@lmp.ufrj.br, E-mail: alessandro@nuclear.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

    2015-07-01

    Accidental control rod drops event in PWR reactors leads to an unsafe operating condition. It is important to quickly identify the rod to minimize undesirable effects in such a scenario. In this event, there is a distortion in the power distribution and temperature in the reactor core. The goal of this study is to develop an on-line model to identify the inadvertent control rod dropped in PWR reactor. The proposed model is based on physical correlations and pattern recognition of ex-core detector responses and thermocouples measures. The results of the study demonstrated the feasibility of an on-line system, contributing to safer operation conditions and preventing undesirable effects, as its shutdown. (author)

  11. Management of accidental scenarios involving the loss of RHRS under shutdown conditions

    International Nuclear Information System (INIS)

    Serradell, V.; Villanueva, J.F.; Martorell, S.; Carlos, S.; Pelayo, F.; Mendizabal, R.; Sol, I.

    2009-01-01

    Results from current Probabilistic Safety Assessment studies of Nuclear Power Plants show the importance of some risky scenarios with the plant at low power and shutdown conditions as compared to the accident scenarios with the plant operating at full power. Technical Specifications establish the Limiting Conditions for operation to assure the plant integrity in each Plant Operational State (POS). Moreover, the plant configuration may differ from the beginning to the end of a certain Plant Operational State, so the Limiting Conditions for Operation (LCO) established could be revised as, depending on the plant configuration, the transient evolution may be slightly different. For a PWR plant, one of the most risky accidental sequences in shutdown is the loss of the residual heat removal system, Using the information provided by the plant low power probabilistic safety analysis (LPSA), which should address the Limiting Conditions for Operation imposed by the current Technical Specification, two situations are distinguished: Main Reactor Cooling System (RCS) fully filled with water and RCS partially filled. In addition, while the primary system is partially filled in Cold Shutdown, two different plant configurations can be distinguished, which depend on the particular POS: RCS open and closed. For each case, the corresponding Technical Specification establishes the path to evacuate the residual heat generated. This paper explores the possibility of having alternative or complementary sources for heat removal others than the ones established in the Technical Specification. Especial attention is paid to the role of Steam Generators as an effective heat sink and the possibility of restart of the redundant RHR train. Such alternatives will influence LPSA implementation results. To perform this analysis the loss of the RHR system in a PWR plant has been simulated using RELAP-5 considering the plant in different plant operational states. One of the main results of this work

  12. Safety assessment of a dry storage container drop into irradiated fuel bays

    International Nuclear Information System (INIS)

    Parlatan, Y.; Oh, D.; Arguner, D.; Lei, Q.M.; Kulpa, T.; Bayoumi, M.H.

    2004-01-01

    In Pickering nuclear stations, Dry Storage Containers (DSCs) are employed to transfer used (irradiated) fuel from an irradiated fuel bay to a dry storage facility for interim storage. Each DSC is wet-loaded in the bay water with 4 fuel modules containing up to a total of 384 used fuel bundles that have been out of the reactor core for at least 10 years. Once the DSC is fully loaded, the crane in the bay raises the DSC for spray-wash such that the bottom of the DSC is never more than 2 m above the bay water surface. This paper presents a safety assessment of consequences of an unlikely event that a fully loaded DSC is accidentally dropped into an irradiated fuel bay from the highest possible elevation. Experiments and analyses performed elsewhere show that the DSC drop-generated shock waves will not threaten the structural integrity of an irradiated fuel bay. Therefore, this assessment only assesses the potential damage to the spent fuel bundles in the bay due to pressure transients generated by an accidental DSC drop. A bounding estimate approach has been used to calculate the upper limit of the pressure pulse and the resulting static and dynamic stresses on the fuel sheath. The bounding calculations and relevant experimental results demonstrate that an accidental drop of a fully loaded DSC into an irradiated fuel bay will not cause additional failures of the main fuel inventories stored in modules in the bay water, thus no consequential release of fission products into the bay water. (author)

  13. Evaluation of finite element codes for demonstrating the performance of radioactive material packages in hypothetical accident drop scenarios

    International Nuclear Information System (INIS)

    Tso, C.F.; Hueggenberg, R.

    2004-01-01

    Drop testing and analysis are the two methods for demonstrating the performance of packages in hypothetical drop accident scenarios. The exact purpose of the tests and the analyses, and the relative prominence of the two in the license application, may depend on the Competent Authority and will vary between countries. The Finite Element Method (FEM) is a powerful analysis tool. A reliable finite element (FE) code when used correctly and appropriately, will allow a package's behaviour to be simulated reliably. With improvements in computing power, and in sophistication and reliability of FE codes, it is likely that FEM calculations will increasingly be used as evidence of drop test performance when seeking Competent Authority approval. What is lacking at the moment, however, is a standardised method of assessing a FE code in order to determine whether it is sufficiently reliable or pessimistic. To this end, the project Evaluation of Codes for Analysing the Drop Test Performance of Radioactive Material Transport Containers, funded by the European Commission Directorate-General XVII (now Directorate-General for Energy and Transport) and jointly performed by Arup and Gesellschaft fuer Nuklear-Behaelter mbH, was carried out in 1998. The work consisted of three components: Survey of existing finite element software, with a view to finding codes that may be capable of analysing drop test performance of radioactive material packages, and to produce an inventory of them. Develop a set of benchmark problems to evaluate software used for analysing the drop test performance of packages. Evaluate the finite element codes by testing them against the benchmarks This paper presents a summary of this work

  14. Evaluation of finite element codes for demonstrating the performance of radioactive material packages in hypothetical accident drop scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Tso, C.F. [Arup (United Kingdom); Hueggenberg, R. [Gesellschaft fuer Nuklear-Behaelter mbH (Germany)

    2004-07-01

    Drop testing and analysis are the two methods for demonstrating the performance of packages in hypothetical drop accident scenarios. The exact purpose of the tests and the analyses, and the relative prominence of the two in the license application, may depend on the Competent Authority and will vary between countries. The Finite Element Method (FEM) is a powerful analysis tool. A reliable finite element (FE) code when used correctly and appropriately, will allow a package's behaviour to be simulated reliably. With improvements in computing power, and in sophistication and reliability of FE codes, it is likely that FEM calculations will increasingly be used as evidence of drop test performance when seeking Competent Authority approval. What is lacking at the moment, however, is a standardised method of assessing a FE code in order to determine whether it is sufficiently reliable or pessimistic. To this end, the project Evaluation of Codes for Analysing the Drop Test Performance of Radioactive Material Transport Containers, funded by the European Commission Directorate-General XVII (now Directorate-General for Energy and Transport) and jointly performed by Arup and Gesellschaft fuer Nuklear-Behaelter mbH, was carried out in 1998. The work consisted of three components: Survey of existing finite element software, with a view to finding codes that may be capable of analysing drop test performance of radioactive material packages, and to produce an inventory of them. Develop a set of benchmark problems to evaluate software used for analysing the drop test performance of packages. Evaluate the finite element codes by testing them against the benchmarks This paper presents a summary of this work.

  15. Analyses to demonstrate the structural performance of the CASTOR KN12 in hypothetical accident drop accident scenarios

    International Nuclear Information System (INIS)

    Diersch, R.; Weiss, M.; Tso, C.F.; Chung, S.H.; Lee, H.Y.

    2004-01-01

    CASTORc ircledR KN-12 is a new cask design by GNB for KHNP-NETEC for dry and wet transportation of up to twelve spent PWR fuel assemblies in Korea. It received its transport license from the Korean Competent Authority KINS in July 2002 and is now in use in South Korea. It has been designed to satisfy the regulatory requirements of the 10 CFR 71 and the IAEA ST-1 for Type B(U)F packages. Its structural performance was demonstrated against the load cases and boundary conditions as defined in 10 CFR 71 and NRC's Regulatory Guide 7.8, and further explained in NUREG 1617. This included normal conditions of transport load cases - including Hot Environment, Cold Environment, Increased External Pressure (140MPa), Minimum External Pressure (24.5kPa), Vibration and shock, and 0.3m free drop - and the hypothetical accident conditions load cases - including the 9m Free Drop, Puncture, Thermal Fire Accident, 200m Water Immersion and 1.5 x MNOP Internal Pressure. Structural performance were demonstrated by analysis, including state-of-the-art finite element (FE) simulation, and confirmed by tests using a 1/3-scale model. Test results were also used to verify the numerical tool and the methods used in the analyses. All the structural analyses including validation against drop tests were carried out by Arup, and testing were carried out by KAERI. This paper concentrates on the analysis carried out to demonstrate performance in the hypothetical accident 9m free drop scenarios, and results from a small selection of them

  16. Analyses to demonstrate the structural performance of the CASTOR KN12 in hypothetical accident drop accident scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Diersch, R.; Weiss, M. [Gesellschaft fuer Nuklear-Behaelter mbH (Germany); Tso, C.F. [Arup (United Kingdom); Chung, S.H.; Lee, H.Y. [KHNP-NETEC (Korea)

    2004-07-01

    CASTORc{sup ircledR} KN-12 is a new cask design by GNB for KHNP-NETEC for dry and wet transportation of up to twelve spent PWR fuel assemblies in Korea. It received its transport license from the Korean Competent Authority KINS in July 2002 and is now in use in South Korea. It has been designed to satisfy the regulatory requirements of the 10 CFR 71 and the IAEA ST-1 for Type B(U)F packages. Its structural performance was demonstrated against the load cases and boundary conditions as defined in 10 CFR 71 and NRC's Regulatory Guide 7.8, and further explained in NUREG 1617. This included normal conditions of transport load cases - including Hot Environment, Cold Environment, Increased External Pressure (140MPa), Minimum External Pressure (24.5kPa), Vibration and shock, and 0.3m free drop - and the hypothetical accident conditions load cases - including the 9m Free Drop, Puncture, Thermal Fire Accident, 200m Water Immersion and 1.5 x MNOP Internal Pressure. Structural performance were demonstrated by analysis, including state-of-the-art finite element (FE) simulation, and confirmed by tests using a 1/3-scale model. Test results were also used to verify the numerical tool and the methods used in the analyses. All the structural analyses including validation against drop tests were carried out by Arup, and testing were carried out by KAERI. This paper concentrates on the analysis carried out to demonstrate performance in the hypothetical accident 9m free drop scenarios, and results from a small selection of them.

  17. Break location influence in pressure vessel SBLOCA scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Querol, Andrea; Gallardo, Sergio; Verdú, Gumersindo, E-mail: anquevi@upv.es, E-mail: sergalbe@iqn.upv.es, E-mail: gverdu@iqn.upv.es [Instituto Universitario de Seguridad Industrial, Radiofísica y Medioambiental (ISIRYM), Universitat Politècnica de València (Spain)

    2017-07-01

    The inspections performed in Davis Besse and in the South Texas Project Unit-I reactors pointed out safety issues regarding the structural integrity of the Pressure Vessel (PV). In these inspections, two anomalies were found: a wall thinning and degradation in the PV upper head of the Davis Besse reactor and a small amount of residue around of two instrument-tube penetration nozzles located in the PV lower plenum of the South Texas Project Unit-I reactor. The evolution of these defects could have resulted in Small Break Loss-Of-Coolant Accidents (SBLOCA) if they had not been detected in time. In this frame, the OECD/NEA considered the necessity to simulate these accidental sequences in the OECD/NEA ROSA Project using the Large Scale Test Facility (LSTF). This work is focused in simulating different hypothetical accidental scenarios in the PV using the thermalhydraulic code TRACE5. These simulations allow studying the break localization influence in the transient and the effectiveness of the accident management (AM) actions considered mitigating the consequences of these hypothetical accidental scenarios. (author)

  18. NAPL migration and ecotoxicity of conventional and renewable fuels in accidental spill scenarios.

    Science.gov (United States)

    Malk, Vuokko; Barreto Tejera, Eduardo; Simpanen, Suvi; Dahl, Mari; Mäkelä, Riikka; Häkkinen, Jani; Kiiski, Anna; Penttinen, Olli-Pekka

    2014-01-01

    Fuels derived from non-petroleum renewable resources have raised interest due to their potential in replacing petroleum-based fuels, but information on their fate and effects in the terrestrial and aquatic environments in accidental spill scenario is limited. In this study, migration of four fuels (conventional diesel, conventional gasoline, renewable diesel NExBTL, and ethanol-blended gasoline RE85 containing maximum 85% ethanol) as non-aqueous phase liquids (NAPL) in soil was demonstrated in a laboratory-scale experiment. Ecotoxicity data was produced for the same fuels. There was no significant difference in migration of conventional and renewable diesel, but gasoline migrated 1.5 times deeper and 7-9 times faster in sand than diesel. RE85 spread horizontally wider but not as deep (p gasoline. Conventional gasoline was the most toxic (lethal concentration [LC50] 20 mg/kg total hydrocarbon content [THC]) among the studied fuels in soil toxicity test with earthworm Eisenia fetida followed by ethanol-blended gasoline (LC50 1,643 mg/kg THC) and conventional diesel (LC50 2,432 mg/kg THC), although gasoline evaporated fast from soil. For comparison, the toxicity of the water-accommodated fractions (WAF) of the fuels was tested with water flea Daphnia magna and Vibrio fischeri, also demonstrating groundwater toxicity. The WAF of conventional gasoline and RE85 showed almost similar toxicity to both the aquatic test species. EC50 values of 1:10 (by volume) WAF were 9.9 %WAF (gasoline) and 9.3 %WAF (RE85) to D. magna and 9.3 %WAF (gasoline) and 12.3 %WAF (RE85) to V. fischeri. Low solubility decreased toxicity potential of conventional diesel in aquatic environment, but direct physical effects of oil phase pose a threat to organisms in nature. Renewable diesel NExBTL did not show clear toxicity to any test species.

  19. Consequences of a double-ended severance of a steam generator tube and accidental development scenario

    International Nuclear Information System (INIS)

    Smirnov, M.V.; Titov, V.F.; Poplavskii, V.M.; Baklushin, R.P.

    1988-01-01

    The results of theoretical analysis for accidental sequences in a modular steam generator are presented. The most probable water leak development in sodium in case of steam generator emergency stop faults is examined. In all schemes the reactor safety is preserved [fr

  20. A combined coalescence gene-dropping tool for evaluating genomic selection in complex scenarios (ms2gs).

    Science.gov (United States)

    Pérez-Enciso, M; Legarra, A

    2016-04-01

    We present ms2gs, a combined coalescence - gene dropping (i.e. backward-forward) simulator for complex traits. It therefore aims at combining the advantages of both approaches. It is primarily conceived for very short term, recent scenarios such as those that are of interest in animal and plant breeding. It is very flexible in terms of defining QTL architecture and SNP ascertainment bias, and it allows for easy modelling of alternative markers such as RADs. It can use real sequence or chip data or generate molecular polymorphisms via the coalescence. It can generate QTL conditional on extant molecular information, such as low-density genotyping. It models (simplistically) sequence, imputation or genotyping errors. It requires as input both genotypic data in plink or ms formats, and a pedigree that is used to perform the gene dropping. By default, it compares accuracy for BLUP, SNP ascertained data, sequence, and causal SNPs. It employs VanRaden's linear (GBLUP) and nonlinear method for incorporating molecular information. To illustrate the program, we present a small application in a half-sib population and a multiparental (MAGIC) cross. The program, manual and examples are available at https://github.com/mperezenciso/ms2gs. © 2016 Blackwell Verlag GmbH.

  1. TWO-DIMENSIONAL MODELLING OF ACCIDENTAL FLOOD WAVES PROPAGATION

    OpenAIRE

    Lorand Catalin STOENESCU

    2011-01-01

    The study presented in this article describes a modern modeling methodology of the propagation of accidental flood waves in case a dam break; this methodology is applied in Romania for the first time for the pilot project „Breaking scenarios of Poiana Uzului dam”. The calculation programs used help us obtain a bidimensional calculation (2D) of the propagation of flood waves, taking into consideration the diminishing of the flood wave on a normal direction to the main direction; this diminishi...

  2. TWO-DIMENSIONAL MODELLING OF ACCIDENTAL FLOOD WAVES PROPAGATION

    Directory of Open Access Journals (Sweden)

    Lorand Catalin STOENESCU

    2011-05-01

    Full Text Available The study presented in this article describes a modern modeling methodology of the propagation of accidental flood waves in case a dam break; this methodology is applied in Romania for the first time for the pilot project „Breaking scenarios of Poiana Uzului dam”. The calculation programs used help us obtain a bidimensional calculation (2D of the propagation of flood waves, taking into consideration the diminishing of the flood wave on a normal direction to the main direction; this diminishing of the flood wave is important in the case of sinuous courses of water or with urban settlements very close to the minor river bed. In the case of Poiana Uzului dam, 2 scenarios were simulated with the help of Ph.D. Eng. Dan Stematiu, plausible scenarios but with very little chances of actually producing. The results were presented as animations with flooded surfaces at certain time steps successively.

  3. Youth versus adult "weightlifting" injuries presenting to United States emergency rooms: accidental versus nonaccidental injury mechanisms.

    Science.gov (United States)

    Myer, Gregory D; Quatman, Carmen E; Khoury, Jane; Wall, Eric J; Hewett, Timothy E

    2009-10-01

    Resistance training has previously been purported to be unsafe and ineffective in children. The purpose of this investigation was to evaluate resistance training-related injuries presenting to U.S. emergency rooms by age, type, and mechanism of injury. We hypothesized that older athletes would sustain greater percentages of joint sprains and muscle strains, whereas younger athletes would sustain a greater percentage of accidental injuries that would result in an increased percentage of fractures in youths. The U.S. Consumer Product Safety Commission (CPSC) National Electronic Injury Surveillance System was queried from 2002 to 2005 using the CPSC code for "Weightlifting." Subjects between the ages of 8 and 30 were grouped by age categories 8 to 13 (elementary/middle school age), 14 to 18 (high school), 19 to 22 (college), and 23 to 30 (adult). Injuries were classified as "accidental" if caused by dropped weight or improper equipment use. Multiple logistic regression was used to compare accidental injuries between age groups. The sample consisted of 4,111 patients. Accidental injuries decreased (p 14 to 18 > 19 to 22 years = 23 to 30 years. Conversely, sprain/strain injuries increased in each successive age group (p injuries (n = 2,565) showed that the oldest categories (19-22 and 23-30 yr) demonstrated a greater percentage of sprains and strains relative to younger age categories (p injuries sustained in the 8 to 13 group were to the hand and foot and were most often related to "dropping" and "pinching" in the injury descriptions, and there was an increased percentage of fractures in the 8 to 13 group relative to all other groups (p injuries are the result of accidents that are potentially preventable with increased supervision and stricter safety guidelines.

  4. Social evaluation of intentional, truly accidental, and negligently accidental helpers and harmers by 10-month-old infants.

    Science.gov (United States)

    Woo, Brandon M; Steckler, Conor M; Le, Doan T; Hamlin, J Kiley

    2017-11-01

    Whereas adults largely base their evaluations of others' actions on others' intentions, a host of research in developmental psychology suggests that younger children privilege outcome over intention, leading them to condemn accidental harm. To date, this question has been examined only with children capable of language production. In the current studies, we utilized a non-linguistic puppet show paradigm to examine the evaluation of intentional and accidental acts of helping or harming in 10-month-old infants. In Experiment 1 (n=64), infants preferred intentional over accidental helpers but accidental over intentional harmers, suggestive that by this age infants incorporate information about others' intentions into their social evaluations. In Experiment 2 (n=64), infants did not distinguish "negligently" accidental from intentional helpers or harmers, suggestive that infants may find negligent accidents somewhat intentional. In Experiment 3 (n=64), we found that infants preferred truly accidental over negligently accidental harmers, but did not reliably distinguish negligently accidental from truly accidental helpers, consistent with past work with adults and children suggestive that humans are particularly sensitive to negligently accidental harm. Together, these results imply that infants engage in intention-based social evaluation of those who help and harm accidentally, so long as those accidents do not stem from negligence. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Decay heat removal and transient analysis in accidental conditions in the EFIT reactor

    International Nuclear Information System (INIS)

    Bandini, G.; Meloni, P.; Polidori, M.; Casamirra, M.; Castiglia, F.; Giardina, M.

    2007-01-01

    The development of a conceptual design of an industrial scale transmutation facility (EFIT) of several 100 MW thermal power based on Accelerator Driven System (ADS) is addressed in the frame of the European EUROTRANS Integral Project. In normal operation, the core power of EFIT reactor is removed through steam generators by four secondary loops fed by water. A safety-related Decay Heat Removal (DHR) system provided with four independent inherently safe loops is installed in the primary vessel to remove the decay heat by natural convection circulation under accidental conditions which lead to the Loss of Heat Sink (LOHS). In order to confirm the adequacy of the adopted solution for decay heat removal in accidental conditions, some multi-D analyses have been carried out with the SIMMER-III code. The results of the SIMMER-III code have been then used to support the RELAP5 1-D representation of the natural circulation flow paths in the reactor vessel. Finally, the thermal-hydraulic RELAP5 code has been employed for the analysis of LOHS accidental scenarios. (author)

  6. Decay Heat Removal and Transient Analysis in Accidental Conditions in the EFIT Reactor

    Directory of Open Access Journals (Sweden)

    Giacomino Bandini

    2008-01-01

    Full Text Available The development of a conceptual design of an industrial-scale transmutation facility (EFIT of several 100 MW thermal power based on accelerator-driven system (ADS is addressed in the frame of the European EUROTRANS Integral Project. In normal operation, the core power of EFIT reactor is removed through steam generators by four secondary loops fed by water. A safety-related decay heat removal (DHR system provided with four independent inherently safe loops is installed in the primary vessel to remove the decay heat by natural convection circulation under accidental conditions which are caused by a loss-of-heat sink (LOHS. In order to confirm the adequacy of the adopted solution for decay heat removal in accidental conditions, some multi-D analyses have been carried out with the SIMMER-III code. The results of the SIMMER-III code have been then used to support the RELAP5 1D representation of the natural circulation flow paths in the reactor vessel. Finally, the thermal-hydraulic RELAP5 code has been employed for the analysis of LOHS accidental scenarios.

  7. Multi-scale Analysis of MEMS Sensors Subject to Drop Impacts

    Directory of Open Access Journals (Sweden)

    Sarah Zerbini

    2007-09-01

    Full Text Available The effect of accidental drops on MEMS sensors are examined within the frame-work of a multi-scale finite element approach. With specific reference to a polysilicon MEMSaccelerometer supported by a naked die, the analysis is decoupled into macro-scale (at dielength-scale and meso-scale (at MEMS length-scale simulations, accounting for the verysmall inertial contribution of the sensor to the overall dynamics of the device. Macro-scaleanalyses are adopted to get insights into the link between shock waves caused by the impactagainst a target surface and propagating inside the die, and the displacement/acceleration his-tories at the MEMS anchor points. Meso-scale analyses are adopted to detect the most stresseddetails of the sensor and to assess whether the impact can lead to possible localized failures.Numerical results show that the acceleration at sensor anchors cannot be considered an ob-jective indicator for drop severity. Instead, accurate analyses at sensor level are necessary toestablish how MEMS can fail because of drops.

  8. Analyses of postulated accidental releases of UF6 inside process buildings

    International Nuclear Information System (INIS)

    Oliveira Neto, Jose Messias de; Nunes, Beatriz Guimaraes; Dias, Cristiane

    2009-01-01

    Uranium Hexafluoride is a material used in the various processes which comprise the front end of the nuclear fuel cycle (conversion, enrichment and fuel fabrication). Confinement of UF 6 is a very important safety requirement since this material is highly reactive and presents safety hazards to humans. The present paper discusses the safety relevant aspects of accidental releases of UF 6 inside process confinement buildings. Postulated accidental scenarios are analyzed and their consequences evaluated. Implant releases rates are estimated using computer code predictions. A time dependent homogeneous compartment model is used to predict concentrations of UF 6 , hydrogen fluoride and uranyl fluoride inside a confinement building, as well as to evaluate source terms released to the atmosphere. These source terms can be used as input to atmospheric dispersion models to evaluate consequences to the environment. The results can also be used to define adequate protective measures for emergency situations. (author)

  9. Analytical Evaluation of Preliminary Drop Tests Performed to Develop a Robust Design for the Standardized DOE Spent Nuclear Fuel Canister

    International Nuclear Information System (INIS)

    Ware, A.G.; Morton, D.K.; Smith, N.L.; Snow, S.D.; Rahl, T.E.

    1999-01-01

    The Department of Energy (DOE) has developed a design concept for a set of standard canisters for the handling, interim storage, transportation, and disposal in the national repository, of DOE spent nuclear fuel (SNF). The standardized DOE SNF canister has to be capable of handling virtually all of the DOE SNF in a variety of potential storage and transportation systems. It must also be acceptable to the repository, based on current and anticipated future requirements. This expected usage mandates a robust design. The canister design has four unique geometries, with lengths of approximately 10 feet or 15 feet, and an outside nominal diameter of 18 inches or 24 inches. The canister has been developed to withstand a drop from 30 feet onto a rigid (flat) surface, sustaining only minor damage - but no rupture - to the pressure (containment) boundary. The majority of the end drop-induced damage is confined to the skirt and lifting/stiffening ring components, which can be removed if de sired after an accidental drop. A canister, with its skirt and stiffening ring removed after an accidental drop, can continue to be used in service with appropriate operational steps being taken. Features of the design concept have been proven through drop testing and finite element analyses of smaller test specimens. Finite element analyses also validated the canister design for drops onto a rigid (flat) surface for a variety of canister orientations at impact, from vertical to 45 degrees off vertical. Actual 30-foot drop testing has also been performed to verify the final design, though limited to just two full-scale test canister drops. In each case, the analytical models accurately predicted the canister response

  10. Projecting temperature-related years of life lost under different climate change scenarios in one temperate megacity, China.

    Science.gov (United States)

    Li, Yixue; Li, Guoxing; Zeng, Qiang; Liang, Fengchao; Pan, Xiaochuan

    2018-02-01

    Temperature has been associated with population health, but few studies have projected the future temperature-related years of life lost attributable to climate change. To project future temperature-related disease burden in Tianjin, we selected years of life lost (YLL) as the dependent variable to explore YLL attributable to climate change. A generalized linear model (GLM) and distributed lag non-linear model were combined to assess the non-linear and delayed effects of temperature on the YLL of non-accidental mortality. Then, we calculated the YLL changes attributable to future climate scenarios in 2055 and 2090. The relationships of daily mean temperature with the YLL of non-accident mortality were basically U-shaped. Both the daily mean temperature increase on high-temperature days and its drop on low-temperature days caused an increase of YLL and non-accidental deaths. The temperature-related YLL will worsen if future climate change exceeds 2 °C. In addition, the adverse effects of extreme temperature on YLL occurred more quickly than that of the overall temperature. The impact of low temperature was greater than that of high temperature. Men were vulnerable to high temperature compared with women. This analysis highlights that the government should formulate environmental policies to reach the Paris Agreement goal. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Dispersion modeling of accidental releases of toxic gases - Comparison of the models and their utility for the fire brigades.

    Science.gov (United States)

    Stenzel, S.; Baumann-Stanzer, K.

    2009-04-01

    Dispersion modeling of accidental releases of toxic gases - Comparison of the models and their utility for the fire brigades. Sirma Stenzel, Kathrin Baumann-Stanzer In the case of accidental release of hazardous gases in the atmosphere, the emergency responders need a reliable and fast tool to assess the possible consequences and apply the optimal countermeasures. For hazard prediction and simulation of the hazard zones a number of air dispersion models are available. The most model packages (commercial or free of charge) include a chemical database, an intuitive graphical user interface (GUI) and automated graphical output for display the results, they are easy to use and can operate fast and effective during stress situations. The models are designed especially for analyzing different accidental toxic release scenarios ("worst-case scenarios"), preparing emergency response plans and optimal countermeasures as well as for real-time risk assessment and management. There are also possibilities for model direct coupling to automatic meteorological stations, in order to avoid uncertainties in the model output due to insufficient or incorrect meteorological data. Another key problem in coping with accidental toxic release is the relative width spectrum of regulations and values, like IDLH, ERPG, AEGL, MAK etc. and the different criteria for their application. Since the particulate emergency responders and organizations require for their purposes unequal regulations and values, it is quite difficult to predict the individual hazard areas. There are a quite number of research studies and investigations coping with the problem, anyway the end decision is up to the authorities. The research project RETOMOD (reference scenarios calculations for toxic gas releases - model systems and their utility for the fire brigade) was conducted by the Central Institute for Meteorology and Geodynamics (ZAMG) in cooperation with the Vienna fire brigade, OMV Refining & Marketing GmbH and

  12. Commitment of involved actors in the preparation of accidental and post-accident situations: European experiments

    International Nuclear Information System (INIS)

    Schneider, Th.

    2010-01-01

    The author briefly describes some approaches developed within the EURANOS European research programme between 2004 and 2009 which aims at promoting the building up of a European network (NERIS) for the management of nuclear accidental and post-accident situations. Notably, he comments the experiment which took place in the Montbeliard district where two types of radiological events have been modelled and simulated: an accident in the Fessenheim nuclear power plant with two scenarios of release, and a transportation accident with a release of radioactive caesium 137. He also evokes the Norwegian experience and some other actions in Finland, Great-Britain, Spain and Slovakia where reflections on the management of accidental and post-accident situations or crisis exercises have been organized

  13. Large fire scenarios in relation to sabotage of nuclear installations

    International Nuclear Information System (INIS)

    Contri, P.; Guerpinar, A.; ); Schneider, U.

    2005-01-01

    The analyses of sabotage scenarios carried out in recent years identified two major damaging mechanisms associated with such scenarios, namely: the mechanical interaction of solid bodies or pressure waves with the installations and the fire-related effects from burning substances. While the former effect may be addressed by available analytical tools developed for accidental scenarios, the latter deserves a new, specific engineering effort. In fact, all nuclear facilities are designed in relation to accidental fires; even so, they need to be assessed in relation to sabotage induced fire scenarios due to the special characteristics of such scenarios, not addressed by the current engineering practice for the design of nuclear installations. Conventional fire hazard analysis is based on the hypothesis of the presence of combustible materials in the buildings and limited number of contemporaneous sources of fire. In addition, conventional fire safety assessment relies upon the presence of mitigation measures and fire related operational procedures. In a sabotage event the validity of all these assumptions need to be checked and if the assumptions cannot be supported, then the analysis should be revised and other alternatives of protection should be developed. Also the implementation of emergency planning should be reviewed to take account of this concern. This paper collects state-of-the-art experience from some Countries, which represents the background information for the development of new IAEA documents in this field. The paper reviews how the current design practice for nuclear installations can cope with large fire scenarios caused by malevolent actions and provides recommendations to designers and operators on how to address these issues in a reasonable framework. (authors)

  14. Modelling accidental releases of tritium in the environment: application as an excel spreadsheet

    International Nuclear Information System (INIS)

    Le Dizes, S.; Tamponnet, C.

    2004-01-01

    An application as an Excel spreadsheet of the simplified modelling approach of tritium transfer in the environment developed by Tamponnet (2002) is presented. Based on the use of growth models of biological systems (plants, animals, etc.), the two-pool model (organic tritium and tritiated water) that was developed estimates the concentration of tritium within the different compartments of the food chain and in fine the dose to man by ingestion in the case of a chronic or accidental release of tritium in a river or the atmosphere. Data and knowledge have been implemented on Excel using the object-oriented programming language VisualBasic (Microsoft Visual Basic 6.0). The structure of the conceptual model and the Excel sheet are first briefly exposed. A numerical application of the model under a scenario of an accidental release of tritium in the atmosphere is then presented. Simulation results and perspectives are discussed. (author)

  15. Acute Renal Failure following Accidental Potassium Bromate ...

    African Journals Online (AJOL)

    Accidental poisoning is common in children. Potassium bromate is a commonly used additive and raising agent in many edibles particularly bread, a staple food worldwide, yet its accidental poisoning has hitherto, not been documented in Nigeria. We report an unusual case of acute renal failure following accidental ...

  16. Accidental close-down of the Trollheim hydropower plant in July 2008. Effects on the fish populations in the river Surna; Utfall av Trollheim kraftverk i juli 2008. Effekter av fiskebestandene i Surna

    Energy Technology Data Exchange (ETDEWEB)

    Forseth, T.; Stickler, M.; Ugedal, O.; Sundt, H.; Bremset, G.; Linnansaari, T.; Hvidsten, N.A.; Harby, A.; Bongard, T.; Alfredsen, K.

    2009-01-15

    An accidental stop in the turbine in the Trollheim Hydropower Plant on 27th July 2008 caused a drop in downstream discharge in the River Surna from 21 to 3 m3/s during 100 min. River discharge was reestablished after three hours. The drop caused large dewatered areas (26 % of total wet area before the drop), but HEC-RAS simulations indicated that the ramping rates were relatively low (less than 20 cm per hour for the whole drop period in the modeled transects). Thus, a high proportion of the fish may have avoided stranding. Stranding mortality was estimated at approximately 14.000 0+ salmon and 3.600 older juveniles (70 % 1+), or the equivalent of approximately 3000 smolts. The loss constitutes less than 3% of the future smolt production downstream the power station (estimated by up-scaling from densities at electrofishing station, via mesohabitats to the whole river stretch) during 2009-2012. About one third of the smolts in the River Surna has been estimated to be produced in areas below the power plant. Between 3000 and 15 000 0+, and an unknown number of older brown trout likely also died from stranding, and the effect was probably larger for the juvenile population of brown trout than Atlantic salmon. All the above estimates are uncertain. Additional releases of water from the reservoir during, and one week after the drop, likely had no effects on the fish populations. The diversity of the zoobenthos communities in the river below the outlet of the power plant is low, likely due to large and frequent variation in discharge. The accidental stop in 2008 was probably particularly damaging, due to the large dewatered areas and low minimum discharge (far below the minimum allowed residual flow at 15 m3/s). This may temporarily reduce biomass and diversity of zoobenthos and thus prey availability for fish. Analysis of discharge data during the period from 2000 to 2008, show that despite measures implemented in the power plant (from 2006), there are several events

  17. Radionuclide dispersion and hydrodynamics of Ilha Grande Bay (Angra dos Reis, RJ) simulated from hypothetical accidental releases of liquid wastes

    International Nuclear Information System (INIS)

    Simoes Filho, Fernando Lamego; Lapa, Celso Marcelo Franklin; Aguiar, Andre Silva; Soares, Abner Duarte

    2011-01-01

    This study has the aim to assess the impact of accidental release of radionuclides postulate from a nuclear power reactor through environmental modeling of aquatic resources. In order to do that it was used computational models of hydrodynamic circulation and transport for the simulation of tritium dispersion caused by an accidental release in Ilha Grande Bay from the site of the future third plant in two circulation scenarios. The main difference between the scenarios is based on the enhancement of dilution of the highest concentrations in the last one. This dilution enhancement resulting in decreasing concentrations was observed only during the first two weeks, when they ranged from 1 x 10 9 to 5 x 10 5 Bq/m³ close to the Itaorna beach spreading just to Sandri Island. After 180 days, the plume could not be detected anymore in the bay, because their activities would be lower than the minimum detectable value (< 11 kBq/m³). (author)

  18. Final Report: Safety of Plasma Components and Aerosol Transport During Hard Disruptions and Accidental Energy Release in Fusion Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Bourham, Mohamed A.; Gilligan, John G.

    1999-08-14

    Safety considerations in large future fusion reactors like ITER are important before licensing the reactor. Several scenarios are considered hazardous, which include safety of plasma-facing components during hard disruptions, high heat fluxes and thermal stresses during normal operation, accidental energy release, and aerosol formation and transport. Disruption events, in large tokamaks like ITER, are expected to produce local heat fluxes on plasma-facing components, which may exceed 100 GW/m{sup 2} over a period of about 0.1 ms. As a result, the surface temperature dramatically increases, which results in surface melting and vaporization, and produces thermal stresses and surface erosion. Plasma-facing components safety issues extends to cover a wide range of possible scenarios, including disruption severity and the impact of plasma-facing components on disruption parameters, accidental energy release and short/long term LOCA's, and formation of airborne particles by convective current transport during a LOVA (water/air ingress disruption) accident scenario. Study, and evaluation of, disruption-induced aerosol generation and mobilization is essential to characterize database on particulate formation and distribution for large future fusion tokamak reactor like ITER. In order to provide database relevant to ITER, the SIRENS electrothermal plasma facility at NCSU has been modified to closely simulate heat fluxes expected in ITER.

  19. Drop-In Clinics for Environmental Science Students

    Directory of Open Access Journals (Sweden)

    Marcie Lynne Jacklin

    2008-12-01

    Full Text Available This paper describes the use of drop in clinics as a new pedagogical approach in information literacy instruction. Although drop in clinics have been used before for library instruction purposes, they are generally aligned with improvement of student academic writing. In the scenario described in this article, in contrast, the drop in clinic is used in a different manner. The drop in clinic as described here offers students an opportunity to engage in self-directed learning by letting them control the content of the instruction. The clinic is offered to students as a way for them to direct their own learning of the course content. It is facilitated by the librarian but it is not controlled by the librarian. The use of this innovative approach is grounded in the example of environmental science and tourism students at a medium sized university in Ontario and it is an approach that has been jointly promoted to students by both the librarian and the course instructor.

  20. Non-accidental injury in children in Kuala Lumpur: An urban perspective

    Directory of Open Access Journals (Sweden)

    Faridah Mohd Nor

    2016-12-01

    Full Text Available Non-accidental deaths in children in Kuala Lumpur, Malaysia are not uncommon, and they are often reported for identification of injuries. Five case series in children are presented here with typical injuries of differing ages in child abuse. Where history was partially hidden from the real scenario, involvement of family members was inevitable. The injuries were particularly diversified from a single unprecedented injury to multiple severe injuries, which led to the deaths of children less than 3 years of age. The discussion revolved around the autopsy and ancillary investigations in the context of urban perspectives in Kuala Lumpur area.

  1. Modelling accidental releases of carbon 14 in the environment: application as an excel spreadsheet

    International Nuclear Information System (INIS)

    Le Dizes, S.; Tamponnet, C.

    2004-01-01

    An application as an Excel spreadsheet of the simplified modelling approach of carbon 14 transfer in the environment developed by Tamponnet (2002) is presented. Based on the use of growth models of biological systems (plants, animals, etc.), the one-pool model (organic carbon) that was developed estimates the concentration of carbon 14 within the different compartments of the food chain and in fine the dose to man by ingestion in the case of a chronic or accidental release of carbon 14 in a river or the atmosphere. Data and knowledge have been implemented on Excel using the object-oriented programming language VisualBasic (Microsoft Visual Basic 6.0). The structure of the conceptual model and the Excel sheet are first briefly exposed. A numerical application of the model under a scenario of an accidental release of carbon 14 in the atmosphere is then presented. Simulation results and perspectives are discussed. (author)

  2. Final Report: Safety of Plasma-Facing Components and Aerosol Transport During Hard Disruptions and Accidental Energy Release in Fusion Reactor

    International Nuclear Information System (INIS)

    Bourham, Mohamed A.; Gilligan, John G.

    1999-01-01

    Safety considerations in large future fusion reactors like ITER are important before licensing the reactor. Several scenarios are considered hazardous, which include safety of plasma-facing components during hard disruptions, high heat fluxes and thermal stresses during normal operation, accidental energy release, and aerosol formation and transport. Disruption events, in large tokamaks like ITER, are expected to produce local heat fluxes on plasma-facing components, which may exceed 100 GW/m 2 over a period of about 0.1 ms. As a result, the surface temperature dramatically increases, which results in surface melting and vaporization, and produces thermal stresses and surface erosion. Plasma-facing components safety issues extends to cover a wide range of possible scenarios, including disruption severity and the impact of plasma-facing components on disruption parameters, accidental energy release and short/long term LOCA's, and formation of airborne particles by convective current transport during a LOVA (water/air ingress disruption) accident scenario. Study, and evaluation of, disruption-induced aerosol generation and mobilization is essential to characterize database on particulate formation and distribution for large future fusion tokamak reactor like ITER. In order to provide database relevant to ITER, the SIRENS electrothermal plasma facility at NCSU has been modified to closely simulate heat fluxes expected in ITER

  3. [THREE CASES OF ACCIDENTAL AUTO-INJECTION OF ADRENALINE].

    Science.gov (United States)

    Yanagida, Noriyuki; Iikura, Katsuhito; Ogura, Kiyotake; Wang, Ling-jen; Asaumi, Tomoyuki; Sato, Sakura; Ebisawa, Motohiro

    2015-12-01

    Reports on accidental auto-injection of adrenaline are few. We encountered three cases of accidental injection of adrenaline. In this study, we have examined and reported the clinical courses and symptoms of our cases. CASE 1 involved a female physician in her 50s who had attended an explanatory meeting on auto-injection of adrenaline. She mistook EpiPen® to be the EpiPen trainer and accidentally injected herself with 0.3 mg EpiPen®. Her systolic/diastolic pressure peaked at 7 min to reach 144/78 mmHg and decreased to 120/77 mmHg at 14 min. Except for palpitation after 7 min, the only subjective symptom was local pain at the injection site. CASE 2 was noted in a 6-year-old boy. He accidentally pierced his right forefinger with 0.15 mg EpiPen®, and after 20 min, his right forefinger was swollen. The swelling improved 80 min after the accidental injection. CASE 3 was noted in a 4-year-old girl. She accidentally injected herself with 0.15 mg EpiPen®. Her systolic/diastolic pressure peaked at 23 min to reach 123/70 mmHg and decreased to 96/86 mmHg at 28 min. Severe adverse effects of accidental auto-injection of adrenaline were not observed in these three cases. Our findings suggest that while handling adrenaline auto-injectors, we should keep in mind the possibility of accidental injection.

  4. Accidental hypothermia-an update

    DEFF Research Database (Denmark)

    Paal, Peter; Gordon, Les; Strapazzon, Giacomo

    2016-01-01

    BACKGROUND: This paper provides an up-to-date review of the management and outcome of accidental hypothermia patients with and without cardiac arrest. METHODS: The authors reviewed the relevant literature in their specialist field. Summaries were merged, discussed and approved to produce this nar......BACKGROUND: This paper provides an up-to-date review of the management and outcome of accidental hypothermia patients with and without cardiac arrest. METHODS: The authors reviewed the relevant literature in their specialist field. Summaries were merged, discussed and approved to produce...... this narrative review. RESULTS: The hospital use of minimally-invasive rewarming for non-arrested, otherwise healthy, patients with primary hypothermia and stable vital signs has the potential to substantially decrease morbidity and mortality for these patients. Extracorporeal life support (ECLS) has...... and post-resuscitation care. CONCLUSIONS: Based on new evidence, additional clinical experience and clearer management guidelines and documentation, the treatment of accidental hypothermia has been refined. ECLS has substantially improved survival and is the treatment of choice in the patient with unstable...

  5. Dispersion modeling of accidental releases of toxic gases - utility for the fire brigades.

    Science.gov (United States)

    Stenzel, S.; Baumann-Stanzer, K.

    2009-09-01

    Several air dispersion models are available for prediction and simulation of the hazard areas associated with accidental releases of toxic gases. The most model packages (commercial or free of charge) include a chemical database, an intuitive graphical user interface (GUI) and automated graphical output for effective presentation of results. The models are designed especially for analyzing different accidental toxic release scenarios ("worst-case scenarios”), preparing emergency response plans and optimal countermeasures as well as for real-time risk assessment and management. The research project RETOMOD (reference scenarios calculations for toxic gas releases - model systems and their utility for the fire brigade) was conducted by the Central Institute for Meteorology and Geodynamics (ZAMG) in cooperation with the Viennese fire brigade, OMV Refining & Marketing GmbH and Synex Ries & Greßlehner GmbH. RETOMOD was funded by the KIRAS safety research program of the Austrian Ministry of Transport, Innovation and Technology (www.kiras.at). The main tasks of this project were 1. Sensitivity study and optimization of the meteorological input for modeling of the hazard areas (human exposure) during the accidental toxic releases. 2. Comparison of several model packages (based on reference scenarios) in order to estimate the utility for the fire brigades. For the purpose of our study the following models were tested and compared: ALOHA (Areal Location of Hazardous atmosphere, EPA), MEMPLEX (Keudel av-Technik GmbH), Trace (Safer System), Breeze (Trinity Consulting), SAM (Engineering office Lohmeyer). A set of reference scenarios for Chlorine, Ammoniac, Butane and Petrol were proceed, with the models above, in order to predict and estimate the human exposure during the event. Furthermore, the application of the observation-based analysis and forecasting system INCA, developed in the Central Institute for Meteorology and Geodynamics (ZAMG) in case of toxic release was

  6. Load drop evaluation for TWRS FSAR

    Energy Technology Data Exchange (ETDEWEB)

    Julyk, L.J.; Ralston, G.L.

    1996-09-30

    Operational or remediation activities associated with existing underground high-level waste storage tank structures at the Hanford Site often require the installation/removal of various equipment items. To gain tank access for installation or removal of this equipment, large concrete cover blocks must be removed and reinstalled in existing concrete pits above the tanks. An accidental drop of the equipment or cover blocks while being moved over the tanks that results in the release of contaminants to the air poses a potential risk to onsite workers or to the offsite public. To minimize this potential risk, the use of critical lift hoisting and rigging procedures and restrictions on lift height are being considered during development of the new tank farm Basis for Interim Operation and Final Safety Analysis Report. The analysis contained herein provides information for selecting the appropriate lift height restrictions for these activities.

  7. Drop impact into a deep pool: Vortex shedding and jet formation

    KAUST Repository

    Agbaglah, Gilou; Thoraval, Marie-Jean; Thoroddsen, Sigurdur T; Zhang, Li V.; Fezzaa, Kamel; Deegan, Robert D.

    2015-01-01

    One of the simplest splashing scenarios results from the impact of a single drop on a deep pool. The traditional understanding of this process is that the impact generates an axisymmetric sheet-like jet that later breaks up into secondary droplets. Recently it was shown that even this simplest of scenarios is more complicated than expected because multiple jets can be generated from a single impact event and there are transitions in the multiplicity of jets as the experimental parameters are varied. Here, we use experiments and numerical simulations of a single drop impacting on a deep pool to examine the transition from impacts that produce a single jet to those that produce two jets. Using high-speed X-ray imaging methods we show that vortex separation within the drop leads to the formation of a second jet long after the formation of the ejecta sheet. Using numerical simulations we develop a phase diagram for this transition and show that the capillary number is the most appropriate order parameter for the transition. © 2014 Cambridge University Press.

  8. Drop impact into a deep pool: Vortex shedding and jet formation

    KAUST Repository

    Agbaglah, Gilou

    2015-01-02

    One of the simplest splashing scenarios results from the impact of a single drop on a deep pool. The traditional understanding of this process is that the impact generates an axisymmetric sheet-like jet that later breaks up into secondary droplets. Recently it was shown that even this simplest of scenarios is more complicated than expected because multiple jets can be generated from a single impact event and there are transitions in the multiplicity of jets as the experimental parameters are varied. Here, we use experiments and numerical simulations of a single drop impacting on a deep pool to examine the transition from impacts that produce a single jet to those that produce two jets. Using high-speed X-ray imaging methods we show that vortex separation within the drop leads to the formation of a second jet long after the formation of the ejecta sheet. Using numerical simulations we develop a phase diagram for this transition and show that the capillary number is the most appropriate order parameter for the transition. © 2014 Cambridge University Press.

  9. Analysis for Eccentric Multi Canister Overpack (MCO) Drops at the Canister Storage Building (CSB) (CSB-S-0073)

    Energy Technology Data Exchange (ETDEWEB)

    TU, K.C.

    1999-10-08

    Multi-Canister Overpacks (MCOs) containing spent nuclear fuel (SNF) will be routinely handled at the Canister Storage Building (CSB) during fuel movement operations in the SNF Project. This analysis was performed to investigate the potential for damage from an eccentric accidental drop onto the standard storage tube, overpack tube, service station, or sample/weld station. Appendix D was added to the FDNW document to include the peer Review Comment Record & transmittal record.

  10. Analysis for Eccentric Multi Canister Overpack (MCO) Drops at the Canister Storage Building (CSB) (CSB-S-0073)

    International Nuclear Information System (INIS)

    TU, K.C.

    1999-01-01

    Multi-Canister Overpacks (MCOs) containing spent nuclear fuel (SNF) will be routinely handled at the Canister Storage Building (CSB) during fuel movement operations in the SNF Project. This analysis was performed to investigate the potential for damage from an eccentric accidental drop onto the standard storage tube, overpack tube, service station, or sample/weld station. Appendix D was added to the FDNW document to include the peer Review Comment Record and transmittal record

  11. Accidental childhood poisoning in Benin City: Still a problem ...

    African Journals Online (AJOL)

    Accidental poisoning (AP) is a leading cause of ill – health and deaths among. Nigerian children. Reports on AP are infrequent in Nigeria. This retrospective descriptive study examined the prevailing pattern of accidental childhood poisoning in Benin City. Accidental poisonings were identified in 226 (3.3%) of the cases ...

  12. Tension Pneumothorax following an Accidental Kerosene Poisoning ...

    African Journals Online (AJOL)

    Tension pneumothorax is a rare complication following an accidental kerosene poisoning. In such situation, a bed-side needle thoracocentesis is performed because of its potential of becoming fatal; hence its clinical importance. A case of 15 month old boy with tension pneumothorax following accidental kerosene ...

  13. Transient analyses on the cooling channels of the DEMO HCPB blanket concept under accidental conditions

    International Nuclear Information System (INIS)

    Chen, Yuming; Ghidersa, Bradut-Eugen; Jin, Xue Zhou

    2016-01-01

    Highlights: • This paper presents transient CFD analyses on the cooling channels of the DEMO HCPB FW for accidental scenarios LOCA and LOFA. • In both LOCA & LOFA, the wall temperature increases quickly to an unacceptable level within seconds. • If the coolant flow rate is maintained at a half of nominal value in case of LOFA (partial LOFA), the wall temperature rises much slower, but will still leads to a damage of structure within minutes. • The simulated heat transfer coefficients were compared with empirical correlations. - Abstract: Helium Cooled Pebble Bed (HCPB) blanket concept is one of the DEMO (Demonstration Power Plant) blanket concepts running for the final DEMO design selection. In this paper, transient analyses on the cooling channels of the FW are carried out by means of CFD simulations for the selected accidental scenarios loss-of-coolant-accident (LOCA) and loss-of-flow-accident (LOFA). ANSYS-CFX is used for the simulations. The simulation results help to understand how fast the temperature of the FW can increase and what is the time window that is available until the temperature of the structural material reaches the design limit in order to be able to define a suitable protection strategy for the system. In view of later developments of the models, the heat transfer coefficients calculated with CFD are compared with the values predicted by two widely used correlations for turbulent pipe flows.

  14. Transient analyses on the cooling channels of the DEMO HCPB blanket concept under accidental conditions

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Yuming, E-mail: Yuming.chen@kit.edu; Ghidersa, Bradut-Eugen; Jin, Xue Zhou

    2016-11-01

    Highlights: • This paper presents transient CFD analyses on the cooling channels of the DEMO HCPB FW for accidental scenarios LOCA and LOFA. • In both LOCA & LOFA, the wall temperature increases quickly to an unacceptable level within seconds. • If the coolant flow rate is maintained at a half of nominal value in case of LOFA (partial LOFA), the wall temperature rises much slower, but will still leads to a damage of structure within minutes. • The simulated heat transfer coefficients were compared with empirical correlations. - Abstract: Helium Cooled Pebble Bed (HCPB) blanket concept is one of the DEMO (Demonstration Power Plant) blanket concepts running for the final DEMO design selection. In this paper, transient analyses on the cooling channels of the FW are carried out by means of CFD simulations for the selected accidental scenarios loss-of-coolant-accident (LOCA) and loss-of-flow-accident (LOFA). ANSYS-CFX is used for the simulations. The simulation results help to understand how fast the temperature of the FW can increase and what is the time window that is available until the temperature of the structural material reaches the design limit in order to be able to define a suitable protection strategy for the system. In view of later developments of the models, the heat transfer coefficients calculated with CFD are compared with the values predicted by two widely used correlations for turbulent pipe flows.

  15. Accidental Poisoning with Otapiapia: a Local Organophasphate ...

    African Journals Online (AJOL)

    Children are prone to accidental poisoning. We report this fatal organophosphate poisoning of a 3-year-old Nigerian boy following accidental ingestion of a homemade cocktail of kerosene and 'Otapiapia': a local rodenticide to highlight the dangers inherent in un-regulated production, home use and storage of this ...

  16. Maximum forseeable accident analysis made by a sodium leak on the BN-800 primary circuit and the more constraining accident development scenario

    International Nuclear Information System (INIS)

    Ivanenko, V.N.; Zybin, V.A.

    1988-01-01

    In this paper the different ways of development for the BN-800 maximum credible accident in case of loss and fire of primary sodium are examined. The more constraining scenario is presented. During the scenario analysis the accidental release of radioactive materials in the environment has been studied. These releases are below the authorized values [fr

  17. Characterisation of childhood and adolescence accidental fatalities ...

    African Journals Online (AJOL)

    Background: Accidental death in childhood and adolescence is posing a public health problem in Nigeria, as most of these deaths were not caused by the victims. There is need to research into the pattern and circumstances surrounding the death. Aim: To characterise and study accidental deaths in childhood and ...

  18. PERFLUOROCARBON LIQUIDS' ABILITY TO PROTECT THE MACULA FROM INTRAOCULAR DROPPING OF METALLIC FOREIGN BODIES: A Model Eye Study.

    Science.gov (United States)

    Shah, Chirag M; Gentile, Ronald C; Mehta, Mitul C

    2016-07-01

    To examine the utility of perfluoro-n-octane (PFO) in balanced salt solution (BSS) to shield the macula from the impact of dropped metallic intraocular foreign bodies (IOFBs) by modeling scenarios in which they may fall during surgical removal. Model eyes were filled with various fluid mixtures (Group 1: 10% PFO/90% BSS; Group 2: 100% BSS; Group 3: 100% PFO; Group 4: 10% PFO/90% air; Group 5: 10% BSS/90% air). In Groups 1, 4, and 5, the 10% fluid volume covered the theoretical macula. For each fluid mixture, up to 30 IOFB drop scenarios were performed for each of the 5 sample IOFBs from 3 locations. Trajectories were recorded using a camera attached to a Zeiss operating microscope (Carl Zeiss, Jena, Germany). The percentages of IOFBs impacting the macula were calculated and Fisher exact test was used to assess differences. In Group 1, 93% (417/450) of the dropped IOFBs were deflected by the PFO-BSS interface compared with 0% (0/500) in Groups 2, 3, 4, and 5 (P macula in 30% of tests when dropped from the superior posterior segment (P < 0.01), all other IOFBs (2.8-13.4 mg) were deflected by the PFO-BSS interface in 100% of Group 1 drops (P < 0.01). As demonstrated by these simulations, the PFO-BSS interface can deflect IOFBs dropped during surgery in a wide range of scenarios, especially when the IOFB is of lower mass.

  19. Impact of a single drop on the same liquid: formation, growth and disintegration of jets

    Science.gov (United States)

    Agbaglah, G. Gilou; Deegan, Robert

    2015-11-01

    One of the simplest splashing scenarios results from the impact of a single drop on on the same liquid. The traditional understanding of this process is that the impact generates a jet that later breaks up into secondary droplets. Recently it was shown that even this simplest of scenarios is more complicated than expected because multiple jets can be generated from a single impact event and there are bifurcations in the multiplicity of jets. First, we study the formation, growth and disintegration of jets following the impact of a drop on a thin film of the same liquid using a combination of numerical simulations and linear stability theory. We obtain scaling relations from our simulations and use these as inputs to our stability analysis. We also use experiments and numerical simulations of a single drop impacting on a deep pool to examine the bifurcation from a single jet into two jets. Using high speed X-ray imaging methods we show that vortex separation within the drop leads to the formation of a second jet long after the formation of the ejecta sheet.

  20. About Assessment Criteria of Driver's Accidental Abilities

    Science.gov (United States)

    Lobanova, Yuliya I.; Glushko, Kirill V.

    2016-01-01

    The article points at the importance of studying the human factor as a cause of accidents of drivers, especially in loosely structured traffic situations. The description of the experiment on the measurement of driver's accidental abilities is given. Under accidental ability is meant the capability to ensure the security of driving as a behavior…

  1. Drop-Burst Length Evaluation of Urban VANETs

    Directory of Open Access Journals (Sweden)

    Awos Kh. Ali

    2017-05-01

    Full Text Available Networks performance is traditionally evaluated using packet delivery ratio (PDR and latency (delay. We propose an addition mechanism the drop-burst length (DBL. Many traffic classes display varying application-level performance according to the pattern of drops, even if the PDR is similar. In this paper we study a number of VANET scenarios and evaluate them with these three metrics. Vehicular Ad-hoc Networks (VANETs are an emerging class of Mobile Ad-hoc Network (MANETs where nodes include both moving vehicles and fixed infrastructure. VANETs aim to make transportation systems more intelligent by sharing information to improve safety and comfort. Efficient and adaptive routing protocols are essential for achieving reliable and scalable network performance. However, routing in VANETs is challenging due to the frequent, high-speed movement of vehicles, which results in frequent network topology changes. Our simulations are carried out using NS2 (for network traffic and SUMO (for vehicular movement simulators, with scenarios configured to reflect real-world conditions. The results show that OLSR is able to achieve a best DBL performance and demonstrates higher PDR performance comparing to AODV and GPSR under low network load. However, with GPSR, the network shows more stable PDR under medium and high network load. In term of delay OLSR is outperformed by GPSR.

  2. The Accidental Transgressor: Morally Relevant Theory of Mind

    Science.gov (United States)

    Killen, Melanie; Mulvey, Kelly Lynn; Richardson, Cameron; Jampol, Noah

    2014-01-01

    To test young children’s false belief theory of mind in a morally relevant context, two experiments were conducted. In Experiment 1, children (N = 162) at 3.5, 5.5, and 7.5 years of age were administered 3 tasks: prototypic moral transgression task, false belief theory of mind task (ToM), and an “accidental transgressor” task, which measured a morally relevant false belief theory of mind (MoToM). Children who did not pass false belief ToM were more likely to attribute negative intentions to an accidental transgressor than children who passed false belief ToM, and to use moral reasons when blaming the accidental transgressor. In Experiment 2, children (N = 46) who did not pass false belief ToM viewed it as more acceptable to punish the accidental transgressor than did participants who passed false belief ToM. Findings are discussed in light of research on the emergence of moral judgment and theory of mind. PMID:21377148

  3. Accidental and retrospective dosimetry using TL method

    International Nuclear Information System (INIS)

    Mesterházy, D.; Osvay, M.; Kovács, A.; Kelemen, A.

    2012-01-01

    Retrospective dosimetry is one of the most important tools of accidental dosimetry for dose estimation when dose measurement was not planned. In the affected area many objects can be applied as natural dosimeters. The paper discusses our recent investigations on various electronic components and common salt (NaCl) having useful thermoluminescence (TL) properties. Among materials investigated the electronic components of cell phones seem promising for retrospective dosimetry purposes, having high TL responses, proper glow curve peaks and the intensity of TL peaks vs. gamma dose received provided nearly linear response in the dose range of 10 mGy–1.5 Gy. - Highlights: ► Electronic components and common salt were investigated for accidental and retrospective dosimetry. ► SMD resistors seem promising for retrospective dosimetry purposes. ► Table salt can be used effectively for accidental dosimetry purposes, as well.

  4. Bipedal gait model for precise gait recognition and optimal triggering in foot drop stimulator: a proof of concept.

    Science.gov (United States)

    Shaikh, Muhammad Faraz; Salcic, Zoran; Wang, Kevin I-Kai; Hu, Aiguo Patrick

    2018-03-10

    Electrical stimulators are often prescribed to correct foot drop walking. However, commercial foot drop stimulators trigger inappropriately under certain non-gait scenarios. Past researches addressed this limitation by defining stimulation control based on automaton of a gait cycle executed by foot drop of affected limb/foot only. Since gait is a collaborative activity of both feet, this research highlights the role of normal foot for robust gait detection and stimulation triggering. A novel bipedal gait model is proposed where gait cycle is realized as an automaton based on concurrent gait sub-phases (states) from each foot. The input for state transition is fused information from feet-worn pressure and inertial sensors. Thereafter, a bipedal gait model-based stimulation control algorithm is developed. As a feasibility study, bipedal gait model and stimulation control are evaluated in real-time simulation manner on normal and simulated foot drop gait measurements from 16 able-bodied participants with three speed variations, under inappropriate triggering scenarios and with foot drop rehabilitation exercises. Also, the stimulation control employed in commercial foot drop stimulators and single foot gait-based foot drop stimulators are compared alongside. Gait detection accuracy (98.9%) and precise triggering under all investigations prove bipedal gait model reliability. This infers that gait detection leveraging bipedal periodicity is a promising strategy to rectify prevalent stimulation triggering deficiencies in commercial foot drop stimulators. Graphical abstract Bipedal information-based gait recognition and stimulation triggering.

  5. Structural Integrity Assessment of VVER-1000 RPV under Accidental Cool down Transients

    International Nuclear Information System (INIS)

    Shrivastav, V.; Sen, R.N.; Yadav, R.S.

    2012-01-01

    Corrosion, Fatigue and Irradiation embrittlement are the major degradation mechanisms responsible for ageing of RPV (and its internals) of a Pressurized Water Reactor. While corrosion and fatigue can generate cracks, irradiation damage can lead to brittle fracture initiating from these cracks. Ageing in nuclear power plants needs to be managed so as to ensure that design functions remain available throughout the life of the plant. From safety perspective, this implies that ageing degradation of systems, structures and components important to safety remain within acceptable limits. Reactor Pressure Vessel has been identified as the highest priority key component in plant life management for Pressurized Water Reactors. Therefore special attention is required to ensure its structural integrity during its lifetime. In this paper, structural integrity assessment for typical VVER-1000 RPV is carried out under severe accidental cool down transients using the Finite Element Method. Three different accidental scenarios are postulated and safety of the vessel is conservatively assessed under these transients using the Linear Elastic Fracture Mechanics approach. Transient thermo mechanical stress analysis of the core belt region of the RPV is carried out in presence of postulated cracks and stress intensity factors are calculated and compared with the material fracture toughness to assess the structural integrity of the vessel. The paper also include some parametric analyses to justify the methodology. (author)

  6. Experimental study of pressure drops through LOCA-generated debris deposited on a fuel assembly

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Jeong Kwan, E-mail: jksuh@khnp.co.kr [KHNP Central Research Institute, 1312-70 Yuseong-daero, Yuseong-gu, Daejeon 305-343 (Korea, Republic of); Kim, Jae Won; Kwon, Sun Guk; Lee, Jae Yong [KHNP Central Research Institute, 1312-70 Yuseong-daero, Yuseong-gu, Daejeon 305-343 (Korea, Republic of); Cho, Hyoung Kyu; Park, Goon Cherl [Department of Nuclear Engineering, Seoul National University, Seoul 151-742 (Korea, Republic of)

    2015-08-15

    Highlights: • In-vessel downstream effect tests were performed in the presence of LOCA-generated debris. • Available driving heads under each LOCA scenario were verified using experimental data. • Fibrous debris was prepared to satisfy the length distribution obtained from the bypass test. • Limiting test conditions were identified through sensitivity studies. - Abstract: Under post loss-of-coolant accident (LOCA) conditions, it is postulated that debris can be generated and transported to the containment sump strainer. Some of the debris may pass through the strainer and could challenge the long-term core cooling capability of the plant. To address this safety issue, in-vessel downstream effect tests for the advanced power reactor (APR) 1400 were performed. Fibrous debris is the most crucial material in terms of causing pressure drops, and was prepared in this study to satisfy the fiber length distribution obtained through a strainer bypass test. Sensitivity studies on pressure drops through LOCA-generated debris deposited on a fuel assembly were performed to evaluate the effects of water chemistry and fiber length distribution. The pressure drops with debris laden pure water were substantially less than those with debris laden ordinary tap water. The experiment with fiber length distribution suggested by WCAP-16793 showed lower pressure drops than those with the APR1400 specific fiber length distribution. All the experimental results showed that the pressure drops in the mock-up fuel assembly were less than the available driving head at each LOCA scenario.

  7. Study for identification of control rod drops in PWR reactors at any burnup step

    International Nuclear Information System (INIS)

    Souza, Thiago J.; Martinez, Aquilino S.; Medeiros, Jose A.C.C.; Goncalves, Alessandro C.

    2013-01-01

    The control rod drop event in PWR reactors induces an unsafe operating condition. Therefore, in a scenario of a control rod drop is important to quickly identify the rod to minimize undesirable effects. The objective of this work is to develop an on-line method for identification of control rod drop in PWR reactors. The method consists on the construction of a tool that is based on the ex-core detector responses. Therefore, it is proposed to recognize patterns in the neutron ex-core detectors responses and thus to identify on-line a control rod drop in the core during the reactor operation. The results of the study, as well as the behavior of the detector responses, demonstrated the feasibility of this method. (author)

  8. Study for identification of control rod drops in PWR reactors at any burnup step

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Thiago J.; Martinez, Aquilino S.; Medeiros, Jose A.C.C.; Goncalves, Alessandro C., E-mail: tsouza@nuclear.ufrj.br, E-mail: aquilino@lmp.ufrj.br, E-mail: canedo@lmp.ufrj.br, E-mail: alessandro@nuclear.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), RJ (Brazil). Programa de Engenharia Nuclear; Palma, Daniel A.P., E-mail: dapalma@cnen.gov.br [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil)

    2013-07-01

    The control rod drop event in PWR reactors induces an unsafe operating condition. Therefore, in a scenario of a control rod drop is important to quickly identify the rod to minimize undesirable effects. The objective of this work is to develop an on-line method for identification of control rod drop in PWR reactors. The method consists on the construction of a tool that is based on the ex-core detector responses. Therefore, it is proposed to recognize patterns in the neutron ex-core detectors responses and thus to identify on-line a control rod drop in the core during the reactor operation. The results of the study, as well as the behavior of the detector responses, demonstrated the feasibility of this method. (author)

  9. Structural analysis of fuel in a vertical drop cask system accident; Análisis estructural del combustible en un accidente de caída vertical del contenedor

    Energy Technology Data Exchange (ETDEWEB)

    Muñoz Cardador, J.; Cerracín Arranz, A.; Muñoz-Reja Ruiz, C.

    2016-07-01

    Una de las situaciones más limitantes en el análisis de integridad del combustible gastado durante el transporte, es el de los hipotéticos accidentes de caída del contenedor. El escenario que debe ser analizado en este tipo de accidentes, según especifica el título 10 de las Code Federal Regulations (10 CFR 71.73) de la NRC, es el de la caída libre del sistema combustible-contenedor desde una altura de nueve metros con el posterior impacto contra una superficie plana, rígida y horizontal en la posición más desfavorable. En concreto, en este artículo se realiza el análisis de la respuesta del combustible bajo el supuesto de caída en posición vertical del contenedor. Para este tipo de análisis, Enusa ha desarrollado y presenta en este artículo un modelo elasto-plástico de elementos finitos capaz de simular mediante un cálculo cuasiestático el comportamiento de una barra combustible irradiada durante el accidente postulado y evaluar su integridad estructural. Aproximaciones mediante un cálculo dinámico a este análisis también has sido acometidas y sus resultados podrán ser presentados en futuros artículos.

  10. Youth Versus Adult “Weightlifting” Injuries Presenting to United States Emergency Rooms: Accidental Versus Nonaccidental Injury Mechanisms

    Science.gov (United States)

    Myer, Gregory D.; Quatman, Carmen E.; Khoury, Jane; Wall, Eric J.; Hewett, Timothy E.

    2014-01-01

    Myer, GD, Quatman, CE, Khoury, J, Wall, EJ, and Hewett, TE. Youth versus adult “weightlifting” injuries presenting to united states emergency rooms: accidental versus nonaccidental injury mechanisms. J Strength Cond Res 23(7): 2054–2060, 2009—Resistance training has previously been purported to be unsafe and ineffective in children. The purpose of this investigation was to evaluate resistance training-related injuries presenting to U.S. emergency rooms by age, type, and mechanism of injury. We hypothesized that older athletes would sustain greater percentages of joint sprains and muscle strains, whereas younger athletes would sustain a greater percentage of accidental injuries that would result in an increased percentage of fractures in youths. The U.S. Consumer Product Safety Commission (CPSC) National Electronic Injury Surveillance System was queried from 2002 to 2005 using the CPSC code for “Weightlifting.” Subjects between the ages of 8 and 30 were grouped by age categories 8 to 13 (elementary/middle school age), 14 to 18 (high school), 19 to 22 (college), and 23 to 30 (adult). Injuries were classified as “accidental” if caused by dropped weight or improper equipment use. Multiple logistic regression was used to compare accidental injuries between age groups. The sample consisted of 4, 111 patients. Accidental injuries decreased (p 14 to 18 > 19 to 22 years = 23 to 30 years. Conversely, sprain/strain injuries increased in each successive age group (p injuries (n = 2, 565) showed that the oldest categories (19–22 and 23–30 yr) demonstrated a greater percentage of sprains and strains relative to younger age categories (p injuries sustained in the 8 to 13 group were to the hand and foot and were most often related to “dropping” and “pinching” in the injury descriptions, and there was an increased percentage of fractures in the 8 to 13 group relative to all other groups (p injuries are the result of accidents that are potentially

  11. Drop impact into a deep pool: vortex shedding and jet formation

    NARCIS (Netherlands)

    Agbaglah, G.; Thoraval, Marie-Jean; Thoroddsen, S.T.; Zhang, L.V.; Fezzaa, K.; Deegan, R.D.

    2015-01-01

    One of the simplest splashing scenarios results from the impact of a single drop on a deep pool. The traditional understanding of this process is that the impact generates an axisymmetric sheet-like jet that later breaks up into secondary droplets. Recently it was shown that even this simplest of

  12. On-line method to identify control rod drops in Pressurized Water Reactors

    International Nuclear Information System (INIS)

    Souza, T.J.; Martinez, A.S.; Medeiros, J.A.C.C.; Palma, D.A.P.; Gonçalves, A.C.

    2014-01-01

    Highlights: • On-line method to identify control rod drops in PWR reactors. • Identification method based on the readings of the ex-core detector. • Recognition of the patterns in the ex-core detector responses. - Abstract: A control rod drop event in PWR reactors leads to an unsafe operating condition. It is important to quickly identify the rod to minimise undesirable effects in such a scenario. The goal of this work is to develop an online method to identify control rod drops in PWR reactors. The method entails the construction of a tool based on ex-core detector responses. It proposes to recognize patterns in the neutron ex-core detectors responses and thus to make an online identification of a control rod drop in the core during the reactor operation. The results of the study, as well as the behaviour of the detector responses demonstrated the feasibility of this method

  13. Últimos perfiles del accidente de trabajo en misión

    OpenAIRE

    Poquet Catalá, Raquel

    2017-01-01

    En este trabajo se analiza desde un punto de vista de la doctrina judicial y jurisprudencial la construcción doctrinal del accidente de trabajo en misión como derivación del accidente de trabajo in itinere y como configuración propia del accidente de trabajo en sí. Así, se procede a la delimitación respecto del accidente in itinere, se realiza un análisis de los requisitos configuradores del mismo, tanto genéricos como específicos, así como la aplicabilidad de la presunción iuris tantum de la...

  14. Complex accident scenarios modelled and analysed by Stochastic Petri Nets

    International Nuclear Information System (INIS)

    Nývlt, Ondřej; Haugen, Stein; Ferkl, Lukáš

    2015-01-01

    This paper is focused on the usage of Petri nets for an effective modelling and simulation of complicated accident scenarios, where an order of events can vary and some events may occur anywhere in an event chain. These cases are hardly manageable by traditional methods as event trees – e.g. one pivotal event must be often inserted several times into one branch of the tree. Our approach is based on Stochastic Petri Nets with Predicates and Assertions and on an idea, which comes from the area of Programmable Logic Controllers: an accidental scenario is described as a net of interconnected blocks, which represent parts of the scenario. So the scenario is firstly divided into parts, which are then modelled by Petri nets. Every block can be easily interconnected with other blocks by input/output variables to create complex ones. In the presented approach, every event or a part of a scenario is modelled only once, independently on a number of its occurrences in the scenario. The final model is much more transparent then the corresponding event tree. The method is shown in two case studies, where the advanced one contains a dynamic behavior. - Highlights: • Event & Fault trees have problems with scenarios where an order of events can vary. • Paper presents a method for modelling and analysis of dynamic accident scenarios. • The presented method is based on Petri nets. • The proposed method solves mentioned problems of traditional approaches. • The method is shown in two case studies: simple and advanced (with dynamic behavior)

  15. Game theory of pre-emptive vaccination before bioterrorism or accidental release of smallpox.

    Science.gov (United States)

    Molina, Chai; Earn, David J D

    2015-06-06

    Smallpox was eradicated in the 1970s, but new outbreaks could be seeded by bioterrorism or accidental release. Substantial vaccine-induced morbidity and mortality make pre-emptive mass vaccination controversial, and if vaccination is voluntary, then there is a conflict between self- and group interests. This conflict can be framed as a tragedy of the commons, in which herd immunity plays the role of the commons, and free-riding (i.e. not vaccinating pre-emptively) is analogous to exploiting the commons. This game has been analysed previously for a particular post-outbreak vaccination scenario. We consider several post-outbreak vaccination scenarios and compare the expected increase in mortality that results from voluntary versus imposed vaccination. Below a threshold level of post-outbreak vaccination effort, expected mortality is independent of the level of response effort. A lag between an outbreak starting and a response being initiated increases the post-outbreak vaccination effort necessary to reduce mortality. For some post-outbreak vaccination scenarios, even modest response lags make it impractical to reduce mortality by increasing post-outbreak vaccination effort. In such situations, if decreasing the response lag is impossible, the only practical way to reduce mortality is to make the vaccine safer (greater post-outbreak vaccination effort leads only to fewer people vaccinating pre-emptively). © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  16. Analysis of accidental UF6 releases

    International Nuclear Information System (INIS)

    Fan Yumao; Tan Rui; Gao Qifa

    2012-01-01

    As interim substance in the nuclear fuel enrichment process, Uranium Hexafluoride (UF 6 ) is widely applied in nuclear processing, enrichment and fuel fabrication plants. Because of its vivid chemical characteristics and special radiological hazard and chemical toxicity, great attention must be paid to accident of UF 6 leakage. The chemical reactions involved in UF 6 release processes were introduced, therewith potential release styles, pathways and characteristics of diffusion were analyzed. The results indicated that the accidental release process of UF 6 is not a simple passive diffusion. So, specific atmospheric diffusion model related to UF 6 releases need be used in order to analyze and evaluate accurately the accidental consequences. (authors)

  17. Interactions between drops of a molten aluminum-lithium alloy and liquid water

    International Nuclear Information System (INIS)

    Nelson, L.S.

    1994-01-01

    In certain hypothesized nuclear reactor accident scenarios, 1- to 10-g drops of molten aluminum-lithium alloys might contact liquid water. Because vigorous steam explosions have occurred when large amounts of molten aluminum-lithium alloys were released into water or other coolants, it becomes important to know whether there will be explosions if smaller amounts of these molten alloys similarly come into contact with water. Therefore, the authors released drops of molten Al-3.1 wt pct Li alloy into deionized water at room temperature. The experiments were performed at local atmospheric pressure (0.085 MPa) without pressure transient triggers applied to the water. The absence of these triggers allowed them to (a) investigate whether spontaneous initiation of steam explosions would occur with these drops and (b) study the alloy-water chemical reactions. The drop sizes and melt temperatures were chosen to simulate melt globules that might form during the hypothesized melting of the aluminum-lithium alloy components

  18. Numerical investigation of the gas concentration field during accidental release in a one vent small enclosure: effect of vent configurations

    OpenAIRE

    MELIDEO DANIELE; BARALDI Daniele

    2016-01-01

    The accumulation of a flammable cloud in an enclosure due to accidental leaks is one of the potential accident scenarios related to the indoor use of hydrogen and fuel cell technologies. Indoor accident configurations involves a wide range of scales, depending on the site and the type of hydrogen technology: a hydrogen dispenser in a warehouse (for hydrogen powered forklifts), a hydrogen powered vehicle in a garage, a fuel cell or hydrogen storage in a cabinet or in a section of a container (...

  19. Allegheny County Fatal Accidental Overdoses

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Fatal accidental overdose incidents in Allegheny County, denoting age, gender, race, drugs present, zip code of incident and zip code of residence. Zip code of...

  20. Development of safety assessment method for human intrusion scenario in Japan. Part 1. Drilling scenario database for safety assessment of geological disposal (Contract research)

    International Nuclear Information System (INIS)

    Nagasawa, Hirokazu; Takeda, Seiji; Kimura, Hideo; Sasaki, Toshihisa

    2010-11-01

    In deep geological disposal or intermediate depth disposal, human intrusion, i.e. accidental excavation or drilling into the disposal site, may make a direct or an indirect effect on the disposal system. Safety assessment method for the human intrusion scenario, that is, the evaluation code of radiological effect from the human intrusion and the data to examine the reduction of the probability of the human intrusion occurring, is essential for the future safety regulation. Assuming that drilling action into the disposal site leads to the human proximity to the radioactive waste or the damage to the barrier system (drilling scenario), we have collected both the data on borehole drilling implemented in Japan and information on actual situation of drilling activities. Based on the data and information, we provide concrete exposure scenarios associated with borehole drilling in the vicinity of the repository and model for estimating the frequency on borehole reaching the depth of repository. The frequency is characterized with the relation to objective of excavation, geographical features, and region in Japan etc. We have developed an assembly of the information mentioned above as database, including the model parameters used in the code to assess radiation dose for drilling scenario. (author)

  1. Drop jumping. II. The influence of dropping height on the biomechanics of drop jumping

    NARCIS (Netherlands)

    Bobbert, M F; Huijing, P A; van Ingen Schenau, G J

    In the literature, athletes preparing for explosive activities are recommended to include drop jumping in their training programs. For the execution of drop jumps, different techniques and different dropping heights can be used. This study was designed to investigate for the performance of bounce

  2. Post accidental small breaks analysis

    International Nuclear Information System (INIS)

    Depond, G.; Gandrille, J.

    1980-04-01

    EDF ordered to FRAMATOME by 1977 to complete post accidental long term studies on 'First Contrat-Programme' reactors, in order to demonstrate the safety criteria long term compliance, to get information on NSSS behaviour and to improve the post accidental procedures. Convenient analytical models were needed and EDF and FRAMATOME respectively developped the AXEL and FRARELAP codes. The main results of these studies is that for the smallest breaks, it is possible to manually undertake cooling and pressure reducing actions by dumping the steam generators secondary side in order to meet the RHR operating specifications and perform long term cooling through this system. A specific small breaks procedure was written on this basis. The EDF and FRAMATOME codes are continuously improved; the results of a French set of separate effects experiments will be incorporated as well as integral system verification

  3. First drop dissimilarity in drop-on-demand inkjet devices

    International Nuclear Information System (INIS)

    Famili, Amin; Palkar, Saurabh A.; Baldy, William J. Jr.

    2011-01-01

    As inkjet printing technology is increasingly applied in a broader array of applications, careful characterization of its method of use is critical due to its inherent sensitivity. A common operational mode in inkjet technology known as drop-on-demand ejection is used as a way to deliver a controlled quantity of material to a precise location on a target. This method of operation allows ejection of individual or a sequence (burst) of drops based on a timed trigger event. This work presents an examination of sequences of drops as they are ejected, indicating a number of phenomena that must be considered when designing a drop-on-demand inkjet system. These phenomena appear to be driven by differences between the first ejected drop in a burst and those that follow it and result in a break-down of the linear relationship expected between driving amplitude and drop mass. This first drop, as quantified by high-speed videography and subsequent image analysis, can be different in morphology, trajectory, velocity, and volume from subsequent drops within a burst. These findings were confirmed orthogonally by both volume and mass measurement techniques which allowed quantitation down to single drops.

  4. Causes of accidental childhood deaths in China in 2010

    DEFF Research Database (Denmark)

    Chan, Kit Yee; Yu, Xin-Wei; Lu, Jia-Peng

    2015-01-01

    -4 years in China, of which 31 633 (10.1%) were accidental. Accidental deaths contributed 7240 (4.0%) of all deaths in neonatal period, 8838 (10.5%) among all post-neonatal infant deaths, and 15 554 (31.7%) among children with 1-4 years of age. Among four tested models, the most predictive was used...

  5. Doctor Ward's Accidental Terrarium.

    Science.gov (United States)

    Hershey, David R.

    1996-01-01

    Presents the story of the accidental invention of the Wardian case, or terrarium, by Nathaniel Bagshaw Ward. Advocates the use of this story in teaching precollege biology as an illustration of how a chance event can lead to a major scientific advancement and as an example of the common occurrence of multiple discovery in botany. Contains 34…

  6. Uncertain analysis of preclosure accident doses for the Yucca Mountain repository

    International Nuclear Information System (INIS)

    Ma, C.W.; Miller, D.D.; Zavoshy, S.J.; Jardine, L.J.

    1990-01-01

    This study presents a generic methodology that can be used to evaluate the uncertainty in the calculated accidental offsite doses at the Yucca Mountain repository during the preclosure period. For demonstration purposes, this methodology is applied to two specific accident scenarios: the first involves a crane dropping an open container with consolidated fuel rods, the second involves container failure during emplacement or removal operations. The uncertainties of thirteen parameters are quantified by various types of probability distributions. The Latin Hypercube Sampling method is used to evaluate the uncertainty of the offsite dose. For the crane-drop scenario with concurrent filter failure, the doses due to the release of airborne fuel particles are calculated to be 0.019, 0.32, and 2.8 rem at confidence levels of 10%, 50%, and 90%, respectively. For the container failure scenario with concurrent filter failure, the 90% confidence-level dose is 0.21 rem. 20 refs., 4 figs., 3 tabs

  7. Dynamic evaluation of environmental impact due to tritium accidental release from the fusion reactor.

    Science.gov (United States)

    Nie, Baojie; Ni, Muyi; Jiang, Jieqiong; Wu, Yican

    2015-10-01

    As one of the key safety issues of fusion reactors, tritium environmental impact of fusion accidents has attracted great attention. In this work, the dynamic tritium concentrations in the air and human body were evaluated on the time scale based on accidental release scenarios under the extreme environmental conditions. The radiation dose through various exposure pathways was assessed to find out the potential relationships among them. Based on this work, the limits of HT and HTO release amount for arbitrary accidents were proposed for the fusion reactor according to dose limit of ITER. The dynamic results aim to give practical guidance for establishment of fusion emergency standard and design of fusion tritium system. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Observaciones sobre accidentes de trabajo y enfermedades profesionales

    Directory of Open Access Journals (Sweden)

    Guillermo Sarmiento López

    1948-03-01

    Full Text Available En los tiempos antiguos no existía ley ni disposición alguna de carácter social que favoreciera a los trabajadores incapacitados por enfermedad o por accidente, por tanto, eran tratados como esclavos o considerados como animales. Los accidentes de trabajo y las enfermedades profesionales eran casi desconocidas antes de la introducción de la maquinaria en la industria, por lo cual no existía el derecho a indemnización por concepto de daños que sufriera el trabajador en el desempeño de sus labores. Solamente se conocen los edictos de Rotari (año 645 de la éra cristiana lanzados en Italia con el fin de reparar los accidentes de los obreros de la construcción y después, en la época del Renacimiento, algunas publicaciones que hablan de ciertas enfermedades de los trabajadores (Ellemborg 1473, Paracelso 1493-1541. Ya en la edad media la industria comenzó a tomar cierta importancia y dada la escasez de brazos, se vio obligado el patrón por fuerza de las circunstancias a prestar ayuda económica a los trabajadores incapacitados por una u otra causa. Los accidentes sucedidos en las industrias no se consideraban como de trabajo, por no conocerse el peligro que envolvía el empleo de la maqumana. En el siglo XVII y a principios del XVIII un médico italiano, Ramazzini habla del perjuicio que ocasionan ciertos trabajos en el organismo del individuo, produciendo alteraciones anatómicas y funcionales. Solamente a fines del siglo XVIII y a principios del XIX con la producción en masa, con el aumento del número de obreros y con la falta de protección, empezaron los accidentes de trabajo a hacerse notorios.

  9. Reports by the Parliamentary Office for scientific and technological assessments. Thursday, May 5, 2011. Post-accidental management of nuclear crisis; Comptes rendus de l' Office Parlementaire d'Evaluation des Choix Scientifiques et Technologiques. Jeudi 5 mai 2011. Gestion post-accidentelle des crises nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-05-15

    The first part addresses the preparedness of the post-accidental management in France. Representatives of control agencies and of nuclear installation operators are asked how they prepare and plan the worst scenario, what is purely hypothetical and what comes from return on experience, how knowledge and practices of other hazardous situations (notably in the chemical industry) can be useful for the nuclear sector. The second part addresses the commitment of French and foreign stakeholders in the management of a post-accidental situation: role and intervention of associations, French participation at the international level and international cooperation in the preparation to the management of a post-accidental situation

  10. Accidentes de trabajo fatales y violencia interpersonal en Brasil, 2000-2010

    Directory of Open Access Journals (Sweden)

    Vilma Sousa Santana

    2013-01-01

    Full Text Available En el presente estudio se estima la mortalidad proporcional por accidentes de trabajo provocados por violencia interpersonal en Brasil, entre 2000 y 2010. Se analizaron los datos del Sistema de Información sobre Mortalidad, basados en los informes estadísti- cos de defunción del Ministerio de Salud de Brasil, los cuales incluyen un campo para el registro de accidentes de trabajo que debe ser completado en toda defunción por causas externas. Se identificaron 1.368.732 casos de defunciones por causas externas, 31.576 (2,3% por accidentes de trabajo y solo 226 (0,02% por accidentes de trabajo con violen- cia interpersonal. Cerca del 80% de los informes estadísticos de defunción no tenían el campo “accidente de trabajo” completado. La mayor cantidad de casos ocurrió entre hom- bres (94,3% de 25-34 años, con nivel de escolaridad medio, ubicados en la región sudeste y noreste, que trabajan principalmente en la producción de bienes y servicios industriales y la actividad agropecuaria. La mayoría de los casos fueron causados por armas de fuego, seguidos por armas blancas, con un aumento relativo de estos últimos en el período estu- diado. Los resultados sugieren un gran subregistro de diagnósticos que reconocen la rela- ción con el trabajo. Se hace necesaria una mejor capacitación en el llenado de los informes estadísticos, así como estudios que cuantifiquen el subregistro de accidentes de trabajo y accidentes de trabajo con violencia interpersonal.

  11. Static and mobile networks design for atmospheric accidental releases monitoring

    International Nuclear Information System (INIS)

    Abida, R.

    2010-01-01

    The global context of my PhD thesis work is the optimization of air pollution monitoring networks, but more specifically it concerns the monitoring of accidental releases of radionuclides in air. The optimization problem of air quality measuring networks has been addresses in the literature. However, it has not been addresses in the context of surveillance of accidental atmospheric releases. The first part of my thesis addresses the optimization of a permanent network of monitoring of radioactive aerosols in the air, covering France. The second part concerns the problem of targeting of observations in case of an accidental release of radionuclides from a nuclear plant. (author)

  12. Monitoring Agent for Detecting Malicious Packet Drops for Wireless Sensor Networks in the Microgrid and Grid-Enabled Vehicles

    Directory of Open Access Journals (Sweden)

    Jongbin Ko

    2012-05-01

    Full Text Available Of the range of wireless communication technologies, wireless sensor networks (WSN will be one of the most appropriate technologies for the Microgrid and Grid-enabled Vehicles in the Smartgrid. To ensure the security of WSN, the detection of attacks is more efficient than their prevention because of the lack of computing power. Malicious packet drops are the easiest means of attacking WSNs. Thus, the sensors used for constructing a WSN require a packet drop monitoring agent, such as Watchdog. However, Watchdog has a partial drop problem such that an attacker can manipulate the packet dropping rate below the minimum misbehaviour monitoring threshold. Furthermore, Watchdog does not consider real traffic situations, such as congestion and collision, and so it has no way of recognizing whether a packet drop is due to a real attack or network congestion. In this paper, we propose a malicious packet drop monitoring agent, which considers traffic conditions. We used the actual traffic volume on neighbouring nodes and the drop rate while monitoring a sending node for specific period. It is more effective in real network scenarios because unlike Watchdog it considers the actual traffic, which only uses the Pathrater. Moreover, our proposed method does not require authentication, packet encryption or detection packets. Thus, there is a lower likelihood of detection failure due to packet spoofing, Man-In-the Middle attacks or Wormhole attacks. To test the suitability of our proposed concept for a series of network scenarios, we divided the simulations into three types: one attack node, more than one attack nodes and no attack nodes. The results of the simulations meet our expectations.

  13. Reducing the loss of vaccines from accidental freezing in the cold chain: the experience of continuous temperature monitoring in Tunisia.

    Science.gov (United States)

    Lloyd, John; Lydon, Patrick; Ouhichi, Ramzi; Zaffran, Michel

    2015-02-11

    Accidental freezing of vaccines is a growing threat and a real risk for national immunization programs when the potency of many vaccines can be compromised if these are exposed to sub-zero temperatures in the cold chain. In Tunisia, this issue is compounded by using sub-standard domestic cold chain equipment instead of equipping the program with medical refrigerators designed specifically for storing vaccines and temperature sensitive pharmaceuticals. Against this backdrop, this paper presents the findings of a demonstration project conducted in Tunisia in 2012 that tested the impact of introducing several freeze prevention solutions to mitigate the risk of accidental freezing of vaccines. The main finding is that, despite the continued use of underperforming domestic refrigerators, continuous temperature monitoring using new technologies combined with other technological interventions significantly reduced the prevalence of accidental exposure to freezing temperatures. These improvements were noticed for cold chain storage at regional, district and health center levels, and during the transport legs that were part of the demonstration conducted in the regions of Kasserine in the South-Eastern part of Tunisia. Subsequent to introducing these freeze prevention solutions, the incidence of freeze alarms was reduced and the percent of time the temperatures dropped below the 2 °C recommended threshold. The incidence of freeze alarms at health center level was reduced by 40%. Lastly, the solutions implemented reduced risk of freezing during transport from 13.8% to 1.7%. Although the solution implemented is not optimal in the longer term because domestic refrigerators are used extensively in district stores and health centers, the risk of accidental freezing is significantly reduced by introducing the practice of continuous temperature monitoring as a standard. The management of the cold chain equipment was strengthened as a result which helps protect the potency of

  14. Accidental Durotomy in Minimally Invasive Transforaminal Lumbar Interbody Fusion: Frequency, Risk Factors, and Management

    Directory of Open Access Journals (Sweden)

    Jan-Helge Klingler

    2015-01-01

    Full Text Available Purpose. To assess the frequency, risk factors, and management of accidental durotomy in minimally invasive transforaminal lumbar interbody fusion (MIS TLIF. Methods. This single-center study retrospectively investigates 372 patients who underwent MIS TLIF and were mobilized within 24 hours after surgery. The frequency of accidental durotomies, intraoperative closure technique, body mass index, and history of previous surgery was recorded. Results. We identified 32 accidental durotomies in 514 MIS TLIF levels (6.2%. Analysis showed a statistically significant relation of accidental durotomies to overweight patients (body mass index ≥25 kg/m2; P=0.0493. Patient age older than 65 years tended to be a positive predictor for accidental durotomies (P=0.0657. Mobilizing patients on the first postoperative day, we observed no durotomy-associated complications. Conclusions. The frequency of accidental durotomies in MIS TLIF is low, with overweight being a risk factor for accidental durotomies. The minimally invasive approach seems to minimize durotomy-associated complications (CSF leakage, pseudomeningocele because of the limited dead space in the soft tissue. Patients with accidental durotomy can usually be mobilized within 24 hours after MIS TLIF without increased risk. The minimally invasive TLIF technique might thus be beneficial in the prevention of postoperative immobilization-associated complications such as venous thromboembolism. This trial is registered with DRKS00006135.

  15. Drop Impact Dynamics with Sessile Drops and Geometries: Spreading, Jetting, and Fragmentation

    Science.gov (United States)

    Tilger, Christopher F.

    The tendency of surface tension to cause small parcels of fluid to form into drops allows convenient packaging, transport, dispersal of liquid phase matter. Liquid drop impacts with solids, liquids, and other drops have realized and additional future applications in biological, manufacturing, heat transfer, and combustion systems. Experiments were conducted to investigate the dynamics of multiple drop collisions, rather than the most-studied phenomenon of single drop impacts. Additional drop impacts were performed on rigid hemispheres representing sessile drops, angled substrates, and into the vertex of two tilted surfaces arranged into a vee shape. A qualitative inspection of drop-sessile drop impacts shows distinct post-impact shapes depending on the offset distance between the drops. At intermediate offset distances, distinct jets issue from the overlap region between the two drops projected areas. These jets are observed to reach their maximum extent at a critical offset distance ratio, epsilon epsilon ˜ 0.75-0.80, with substrate contact angle and W e having a lesser effect. Capillary waves that traverse the sessile drop after collision cause a lower aspect ratio liquid column to emanate from the sessile drop opposite the impact. In order to better understand the jetting phenomenon seen in the offset drop-sessile drop impacts, simpler solid geometries are investigated that elicit a similar behavior. Solid hemispheres do not show the singular jetting observed in the fluidic case, however, a simple vee formed by two intersection planar substrates do jet in a similar fashion to the fluidic case. A geometric model with partnered experiments is developed to describe the bisymmetric spread of an impacting drop on an angled substrate. This geometric model is used to guide a time of arrival based model for various features of the drop impact, which is used to predict jetting in various vee channel experiments.

  16. Patterns and Trends in Accidental Poisoning Deaths: Pennsylvania's Experience 1979-2014.

    Directory of Open Access Journals (Sweden)

    Lauren C Balmert

    Full Text Available The purpose of this study was to examine county and state-level accidental poisoning mortality trends in Pennsylvania from 1979 to 2014.Crude and age-adjusted death rates were formed for age group, race, sex, and county for accidental poisonings (ICD 10 codes X40-X49 from 1979 to 2014 for ages 15+ using the Mortality and Population Data System housed at the University of Pittsburgh. Rate ratios were calculated comparing rates from 1979 to 2014, overall and by sex, age group, and race. Joinpoint regression was used to detect statistically significant changes in trends of age-adjusted mortality rates.Rate ratios for accidental poisoning mortality in Pennsylvania increased more than 14-fold from 1979 to 2014. The largest rate ratios were among 35-44 year olds, females, and White adults. The highest accidental poisoning mortality rates were found in the counties of Southwestern Pennsylvania, those surrounding Philadelphia, and those in Northeast Pennsylvania near Scranton.The patterns and locations of accidental poisoning mortality by race, sex, and age group provide direction for interventions and policy makers. In particular, this study found the highest rate ratios in PA among females, whites, and the age group 35-44.

  17. Individual housing-based socioeconomic status predicts risk of accidental falls among adults.

    Science.gov (United States)

    Ryu, Euijung; Juhn, Young J; Wheeler, Philip H; Hathcock, Matthew A; Wi, Chung-Il; Olson, Janet E; Cerhan, James R; Takahashi, Paul Y

    2017-07-01

    Accidental falls are a major public health concern among people of all ages. Little is known about whether an individual-level housing-based socioeconomic status measure is associated with the risk of accidental falls. Among 12,286 Mayo Clinic Biobank participants residing in Olmsted County, Minnesota, subjects who experienced accidental falls between the biobank enrollment and September 2014 were identified using ICD-9 codes evaluated at emergency departments. HOUSES (HOUsing-based Index of SocioEconomic Status), a socioeconomic status measure based on individual housing features, was also calculated. Cox regression models were utilized to assess the association of the HOUSES (in quartiles) with accidental fall risk. Seven hundred eleven (5.8%) participants had at least one emergency room visit due to an accidental fall during the study period. Subjects with higher HOUSES were less likely to experience falls in a dose-response manner (hazard ratio: 0.58; 95% confidence interval: 0.44-0.76 for comparing the highest to the lowest quartile). In addition, the HOUSES was positively associated with better health behaviors, social support, and functional status. The HOUSES is inversely associated with accidental fall risk requiring emergency care in a dose-response manner. The HOUSES may capture falls-related risk factors through housing features and socioeconomic status-related psychosocial factors. Copyright © 2017 Elsevier Inc. All rights reserved.

  18. Commitment of involved actors in the preparation of accidental and post-accident situations: European experiments; Engagement des parties prenantes a la preparation aux situations accidentelles et post-accidentelles: experiences Europeennes

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Th. [CEPN, 28 rue de la Redoute, 92260 Fontenay-aux-Roses (France)

    2010-07-01

    The author briefly describes some approaches developed within the EURANOS European research programme between 2004 and 2009 which aims at promoting the building up of a European network (NERIS) for the management of nuclear accidental and post-accident situations. Notably, he comments the experiment which took place in the Montbeliard district where two types of radiological events have been modelled and simulated: an accident in the Fessenheim nuclear power plant with two scenarios of release, and a transportation accident with a release of radioactive caesium 137. He also evokes the Norwegian experience and some other actions in Finland, Great-Britain, Spain and Slovakia where reflections on the management of accidental and post-accident situations or crisis exercises have been organized

  19. Comportamiento de los accidentes laborales

    Directory of Open Access Journals (Sweden)

    Miguel Gómez Vital

    1999-01-01

    Full Text Available Se realiza una valoración sobre la situación de la accidentalidad en centros de trabajo de la provincia de Villa Clara de 1993 a 1997. El total de accidentes registrados fue de 12 522. Últimamente han disminuido y su índice de incidencia. En el último año se redujo el promedio de días perdidos, pero el índice de gravedad alcanzó la cifra mayor. Se insiste en el cumplimiento del programa de prevención y reducción de accidentes laborales.The situation of the occupational accidents that occurred in the province of Villa Clara from 1993 to 1997 was assessed. 12 522 accidents were registered during that periods. A decrease of these accidents and of their incidence rate has been observed lately. The average of lost days was reduced during the last year, out the severity index reached the highest figure. Emphasis is made on the importance of fulfilling the program of prevention and reduction of occupational accidents.

  20. A descriptive study of accidental skeletal injuries and non-accidental skeletal injuries of child maltreatment.

    Science.gov (United States)

    Ghanem, Maha A H; Moustafa, Tarek A; Megahed, Haidy M; Salama, Naglaa; Ghitani, Sara A

    2018-02-01

    Lack of awareness and recognition of child maltreatment is the major reason behind underreporting. All victims often interact with the health care system for routine or emergency care. In several research works, non-accidental fractures are the second most common injury in maltreated children and it is represented up to one-third of cases. To determine the incidence of different types of accidental and non-accidental skeletal injuries among children, estimate the severity of injuries according to the modified injury severity score and to determine the degree of fractures either closed or opened (Gustiloe-Anderson open fracture classification). Moreover, identifying fractures resulting from child abuse and neglect. This aimed for early recognition of non-accidental nature of fractures in child maltreatment that can prevent further morbidity and mortality. A descriptive study was carried out on all children (109) with skeletal injuries who were admitted to both Main Alexandria and El-Hadara Orthopedic and Traumatology University Hospitals during six months. History, physical examination and investigations were done for the patients. A detailed questionnaire was taken to diagnose child abuse and neglect. Gustiloe-Anderson open fracture classification was used to estimate the degree of open fractures. Out of 109 children, twelve cases (11%) were categorized as child maltreatment. One case was physical abuse, eight cases (7.3%) were child neglect and three cases (2.8%) were labour exploitation. Road traffic accidents (RTA) was the commonest cause of skeletal injuries followed by falling from height. Regarding falls, they included 4 cases of stair falls in neglected children and another four cases of falling from height (balcony/window). The remaining 36 cases of falls were accidental. The skeletal injuries were in the form of fractures in 99 cases, dislocation in two cases, both fracture and/or dislocation in three cases, and bone deformity from brachial plexus injury

  1. Accidental Innovation

    DEFF Research Database (Denmark)

    Austin, Robert D.; Devin, Lee; Sullivan, Erin E.

    2012-01-01

    Historical accounts of human achievement suggest that accidents can play an important role in innovation. In this paper, we seek to contribute to an understanding of how digital systems might support valuable unpredictability in innovation processes by examining how innovators who obtain value from...... they incorporate accidents into their deliberate processes and arranged surroundings. By comparing makers working in varied conditions, we identify specific factors (e.g., technologies, characteristics of technologies) that appear to support accidental innovation. We show that makers in certain specified...... conditions not only remain open to accident but also intentionally design their processes and surroundings to invite and exploit valuable accidents. Based on these findings, we offer advice for the design of digital systems to support innovation processes that can access valuable unpredictability....

  2. A Nuclide Release Model for a Deep Well Scenario near a Repository

    International Nuclear Information System (INIS)

    Lee, Youn Myoung; Jung, Jong Tae; Choi, Jong Won

    2010-01-01

    Recently several template programs ready for the safety assessment of a high-level radioactive waste repository (HLW) and a low- and intermediate level radioactive waste repository (LILW) systems, that are conceptually modeled, have been developed by utilizing GoldSim and AMBER at KAERI. During the last few years, such template programs have been utilized for the evaluation of nuclide transports in the nearand far-field of a repository as well as transport through the biosphere under various normal and disruptive release scenarios with assumed data. The GoldSim program, another template program by which influence due to a well located very near to the repository has been modeled and evaluated for an assumed case in order to simulate the worst exposure scenario. This seems very useful to evaluate an accidental event a long time after closure of the repository has been developed and illustrated

  3. Accidental symmetries and the effective Lagrangian of string theory

    International Nuclear Information System (INIS)

    Ovrut, B.A.

    1989-01-01

    In this paper the relationship between accidental worldsheet symmetries of the string generating functional and target space invariance groups is discussed. Accidental symmetries are used to derive the invariance groups and effective low energy Lagrangian for the bosonic string, and the heterotic string compactified to four-dimensions on Z N orbifolds. The necessity of a new type of Green-Schwarz mechanism, associated with the auxiliary vector field in the four-dimensional N = 1 supergravity multiplet, is shown using these methods

  4. Night work, long work weeks, and risk of accidental injuries. A register-based study.

    Science.gov (United States)

    Larsen, Ann D; Hannerz, Harald; Møller, Simone V; Dyreborg, Johnny; Bonde, Jens Peter; Hansen, Johnni; Kolstad, Henrik A; Hansen, Åse Marie; Garde, Anne Helene

    2017-11-01

    Objectives The aims of this study were to (i) investigate the association between night work or long work weeks and the risk of accidental injuries and (ii) test if the association is affected by age, sex or socioeconomic status. Methods The study population was drawn from the Danish version of the European Labour Force Survey from 1999-2013. The current study was based on 150 438 participants (53% men and 47% women). Data on accidental injuries were obtained at individual level from national health registers. We included all 20-59-year-old employees working ≥32 hours a week at the time of the interview. We used Poisson regression to estimate the relative rates (RR) of accidental injuries as a function of night work or long work weeks (>40 hours per week) adjusted for year of interview, sex, age, socioeconomic status (SES), industry, and weekly working hours or night work. Age, sex and SES were included as two-way interactions. Results We observed 23 495 cases of accidental injuries based on 273 700 person years at risk. Exposure to night work was statistically significantly associated with accidental injuries (RR 1.11, 99% CI 1.06-1.17) compared to participants with no recent night work. No associations were found between long work weeks (>40 hours) and accidental injuries. Conclusion We found a modest increased risk of accidental injuries when reporting night work. No associations between long work weeks and risk of accidental injuries were observed. Age, sex and SES showed no trends when included as two-way interactions.

  5. Los hombres y los accidentes de tránsito: un vistazo al riesgo, conducta de riesgo, notificación de accidentes, educación y formación profesional

    Directory of Open Access Journals (Sweden)

    Cintia Rodrigues

    2017-05-01

    Full Text Available Abstract Los accidentes de tránsito son un grave y complejo problema de salud pública. La literatura señala que los accidentes de tránsito están asociados confactores de comportamiento, seguridad de los vehículos y la precariedad del espacio urbano.Reducir el número de accidentes de tránsito es un reto para los gestores deárea. La educación en el tránsito debe considerar la vigilancia como una estrategia eficaz para cambiar el comportamiento del conductor,principalmente en relación con el exceso de velocidad y el consumo de alcohol asociado con la conducción.La ingeniería tiene un papel importante para promover un entorno seguro,en el que la convivencia de peatones, ciclistas y conductores sea posible. El escenario en que se configura los accidentes de tránsito muestra la necesidad de los profesionales de la salud reconsiderar sus prácticas con el fin de replantear la imagen de la víctima de accidentes, las formas de trabajo de prevención de accidentes, la educación en el tránsito de peatones y conductores, con el fin de promover la salud y la cultura de paz. Existe la necesidad de políticas de salud públicay estrategias que hacen posible acceso a las acciones tanto en el campo preventivo como en el campo de la rehabilitación.

  6. Hypothetical air ingress scenarios in advanced modular high temperature gas cooled reactors

    International Nuclear Information System (INIS)

    Kroeger, P.G.

    1988-01-01

    Considering an extremely hypothetical scenario of complete cross duct failure and unlimited air supply into the reactor vessel of a modular high temperature gas cooled ractor, it is found that the potential air inflow remains limited due to the high friction pressure drop through the active core. All incoming air will be oxidized to CO and some local external burning would be temporarily possible in such a scenario. The accident would have to continue with unlimited air supply for hundreds of hours before the core structural integrity would be jeopardized

  7. La prevención de accidentes (3

    Directory of Open Access Journals (Sweden)

    Chinchilla, M.

    1966-04-01

    Full Text Available The financial loss due to working accidents is very substantial, quite apart from the actual loss of human lives. Hence avoiding these accidents is a most important matter. The accident index in the various industries shows a rate of increase that is larger than should be the case in proportion to the development of the industries concerned, and the larger number of employees. The fact that these indexes are smaller in many countries, however, shows that these accidents can be considerably reduced if suitable measures are taken to avoid them. In chapter 2 of our magazine, issue no. 178, a variety of reasons were discussed that may originate accidents, although these causes are not directly linked to the accident itself. In this article mention is made of some of the measures that can be taken in the handling of cutting and welding equipment, and also of inflammable liquids, to prevent possible accidents.El peso de los accidentes de trabajo sobre la economía supone cantidades muy grandes que, independientemente del inestimable valor de una vida humana, realzan la importancia de la prevención de accidentes. Los índices de accidentes muestran en diferentes industrias un crecimiento mayor de lo que debería corresponder proporcionalmente, habida cuenta del crecimiento laboral. El hecho de que en distintos países los índices sean inferiores, demuestra que se pueden conseguir buenos frutos si se concede primordial importancia a que los trabajos se realicen con las debidas medidas de seguridad. En el Capítulo 2, número 178 de esta Revista, se detallaron diversas causas que pueden originar un accidente sin estar ligadas en forma directa con una tarea determinada. En el presente trabajo se indican algunas de las medidas que deben observarse en el manejo de los equipos de soldadura y corte, así como en el transvase de líquidos inflamables.

  8. Flavour from accidental symmetries

    International Nuclear Information System (INIS)

    Ferretti, Luca; King, Stephen F.; Romanino, Andrea

    2006-01-01

    We consider a new approach to fermion masses and mixings in which no special 'horizontal' dynamics is invoked to account for the hierarchical pattern of charged fermion masses and for the peculiar features of neutrino masses. The hierarchy follows from the vertical, family-independent structure of the model, in particular from the breaking pattern of the Pati-Salam group. The lightness of the first two fermion families can be related to two family symmetries emerging in this context as accidental symmetries

  9. Effects of drop freezing on microphysics of an ascending cloud parcel under biomass burning conditions

    Science.gov (United States)

    Diehl, K.; Simmel, M.; Wurzler, S.

    There is some evidence that the initiation of warm rain is suppressed in clouds over regions with vegetation fires. Thus, the ice phase becomes important as another possibility to initiate precipitation. Numerical simulations were performed to investigate heterogeneous drop freezing for a biomass-burning situation. An air parcel model with a sectional two-dimensional description of the cloud microphysics was employed with parameterizations for immersion and contact freezing which consider the different ice nucleating efficiencies of various ice nuclei. Three scenarios were simulated resulting to mixed-phase or completely glaciated clouds. According to the high insoluble fraction of the biomass-burning particles drop freezing via immersion and contact modes was very efficient. The preferential freezing of large drops followed by riming (i.e. the deposition of liquid drops on ice particles) and the evaporation of the liquid drops (Bergeron-Findeisen process) caused a further decrease of the liquid drops' effective radius in higher altitudes. In turn ice particle sizes increased so that they could serve as germs for graupel or hailstone formation. The effects of ice initiation on the vertical cloud dynamics were fairly significant leading to a development of the cloud to much higher altitudes than in a warm cloud without ice formation.

  10. Accidental childhood poisoning in Calabar at the turn of the 20 th ...

    African Journals Online (AJOL)

    Background: Accidental poisoning is a preventable cause of childhood morbidity and mortality. Therefore, knowledge of the common causative agents is necessary in order to create awareness among caregivers towards its prevention. Objectives: To document the pattern of accidental childhood poisoning in Calabar from ...

  11. Bolt study - behaviour of bolts in drop accident scenarios of the Nirex 3m3 Box ILW package

    International Nuclear Information System (INIS)

    Turner, G.; Tso, C.F.

    2004-01-01

    The mission of Nirex is to provide the UK with safe, environmentally sound and publicly acceptable options for the long-term management of radioactive materials. One of the key tasks is to ensure that waste is packaged by waste producers in a form which is suitable for safe storage, transport, handling and potential disposal. In pursuit of this key requirement, Nirex has developed specifications to set the standard for the design and performance of waste packages, and has developed standard containers for the packaging of intermediate level (ILW) and some low level waste (LLW) - one of these is the 3m 3 Box for immobilised operational and decommissioning ILW. The dimension envelope of this package is 1716 mm x 1716 mm in plan with 430 mm corner radii, 1226 mm tall. The maximum loaded weight is 12 tonnes. A generic design of this container has been developed, which is a welded structure manufactured from austenitic stainless steel (EN 10088-2 steel number 1.4404). The lid is connected to the body by 28 stainless steel bolts. An extensive study was carried out to develop a robust FE model of the bolts. The specific focus of this work was to use improved bolt modelling to optimize the design of the 3m 3 Box, although this work could be applied to other bolted containers. This paper presents a summary of the findings from the study as follows: 1. Development of a FE bolt model for application in a 3m 3 Box model. 2. Development and execution of a bolt testing programme which included tensile and shear tests on a total of 88 bolts, representing four grades of stainless steel materials, three thread sizes, and two geometries at three strain rates. 3. Benchmarking of the FE bolt model that can be used with confidence in simulating waste package behaviour in drop scenarios

  12. Dental pain as a risk factor for accidental acetaminophen overdose: a case-control study.

    Science.gov (United States)

    Vogel, Jody; Heard, Kennon J; Carlson, Catherine; Lange, Chad; Mitchell, Garrett

    2011-11-01

    Patients frequent take acetaminophen to treat dental pain. One previous study found a high rate of overuse of nonprescription analgesics in an emergency dental clinic. The purpose of this study is to determine if patients with dental pain are more likely to be treated for accidental acetaminophen poisoning than patients with other types of pain. We conducted a case-control study at 2 urban hospitals. Cases were identified by chart review of patients who required treatment for accidental acetaminophen poisoning. Controls were self-reported acetaminophen users taking therapeutic doses identified during a survey of emergency department patients. For our primary analysis, the reason for taking acetaminophen was categorized as dental pain or not dental pain. Our primary outcome was the odds ratio of accidental overdose to therapeutic users after adjustment for age, sex, alcoholism, and use of combination products using logistic regression. We identified 73 cases of accidental acetaminophen poisoning and 201 therapeutic users. Fourteen accidental overdose patients and 4 therapeutic users reported using acetaminophen for dental pain. The adjusted odds ratio for accidental overdose due to dental pain compared with other reasons for use was 12.8 (95% confidence interval, 4.2-47.6). We found that patients with dental pain are at increased risk to accidentally overdose on acetaminophen compared with patients taking acetaminophen for other reasons. Emergency physicians should carefully question patients with dental pain about overuse of analgesics. Copyright © 2011 Elsevier Inc. All rights reserved.

  13. Accidentes de trabajo en un hospital de agudos

    Directory of Open Access Journals (Sweden)

    Pérez Bermúdez B.

    1998-01-01

    Full Text Available FUNDAMENTO: El mejor conocimiento de los determinantes y circunstancias de producción de los accidentes laborales, favorecerá la implantación de medidas correctoras. El objetivo de este trabajo es describir la evolución temporal de los accidentes de trabajo (AT y determinar los factores de riesgo de baja médica en el Hospital Dr. Peset de Valencia. MÉTODOS: Descripción y análisis retrospectivo de los accidentes de trabajo producidos en el Hospital Dr. Peset de Valencia durante los años 1992 a 1995. Se estimó por métodos deterministas la tendencia y estacionalidad de las series (índices estacionales, IE. Se aplicó un modelo de regresión logística para identificar los factores pronósticos de baja médica y determinar su probabilidad de ocurrencia . RESULTADOS: Las tasas más elevadas de AT se produjeron entre los trabajadores de cocina y lavandería (10,00 AT por 100 trabajadores-año. Los AT con baja médica mantienen una tendencia cercana a cero siendo febrero el mes con I.E más elevado (IE=139,8. Los que cursan sin baja médica tienen una tendencia positiva (r²=0,23, p<0,0001, siendo mayo el mes de mayor siniestralidad (IE=134,2. La probabilidad de que el accidente curse con baja médica aumenta significativamente con la edad, cuando se produce por la tarde, si ha tenido lugar en cocina/lavandería, y si se trata de un esguince o tendinitis. CONCLUSIONES: la actuación sobre la siniestralidad en los AT que cursen con IT, debería centrarse sobre los trabajos menos cualificados y en las áreas de cocina y lavandería.

  14. Night work, long work weeks, and risk of accidental injuries. A register-based study

    DEFF Research Database (Denmark)

    Larsen, Ann D; Hannerz, Harald; Møller, Simone V

    2017-01-01

    of the European Labour Force Survey from 1999-2013. The current study was based on 150 438 participants (53% men and 47% women). Data on accidental injuries were obtained at individual level from national health registers. We included all 20-59-year-old employees working ≥32 hours a week at the time...... of the interview. We used Poisson regression to estimate the relative rates (RR) of accidental injuries as a function of night work or long work weeks (>40 hours per week) adjusted for year of interview, sex, age, socioeconomic status (SES), industry, and weekly working hours or night work. Age, sex and SES were....... No associations were found between long work weeks (>40 hours) and accidental injuries. Conclusion: We found a modest increased risk of accidental injuries when reporting night work. No associations between long work weeks and risk of accidental injuries were observed. Age, sex and SES showed no trends when...

  15. Evaluation of pressure response in the Los Alamos controlled air incinerator during three incident scenarios

    International Nuclear Information System (INIS)

    Vavruska, J.S.; Elsberry, K.; Thompson, T.K.; Pendergrass, J.A.

    1996-01-01

    The Los Alamos Controlled Air Incinerator (CAI) is a system designed to accept radioactive mixed waste containing alpha-emitting radionuclides. A mathematical model was developed to predict the pressure response throughout the offgas treatment system of the CAI during three hypothetical incident scenarios. The scenarios examined included: (1) loss of burner flame and failure of the flame safeguard system with subsequent reignition of fuel gas in the primary chamber, (2) pyrolytic gas buildup from a waste package due to loss of induced draft and subsequent restoration of induced draft, and (3) accidental charging of propellant spray cans in a solid waste package to the primary chamber during a normal feed cycle. For each of the three scenarios, the finite element computer model was able to determine the transient pressure surge and decay response throughout the system. Of particular interest were the maximum absolute pressures attainable at critical points in the system as well as maximum differential pressures across the high efficiency particulate air (HEPA) filters. Modeling results indicated that all three of the scenarios resulted in maximum HEPA filter differential pressures well below the maximum allowable levels

  16. ARAMIS project: A comprehensive methodology for the identification of reference accident scenarios in process industries

    International Nuclear Information System (INIS)

    Delvosalle, Christian; Fievez, Cecile; Pipart, Aurore; Debray, Bruno

    2006-01-01

    In the frame of the Accidental Risk Assessment Methodology for Industries (ARAMIS) project, this paper aims at presenting the work carried out in the part of the project devoted to the definition of accident scenarios. This topic is a key-point in risk assessment and serves as basis for the whole risk quantification. The first result of the work is the building of a methodology for the identification of major accident hazards (MIMAH), which is carried out with the development of generic fault and event trees based on a typology of equipment and substances. The term 'major accidents' must be understood as the worst accidents likely to occur on the equipment, assuming that no safety systems are installed. A second methodology, called methodology for the identification of reference accident scenarios (MIRAS) takes into account the influence of safety systems on both the frequencies and possible consequences of accidents. This methodology leads to identify more realistic accident scenarios. The reference accident scenarios are chosen with the help of a tool called 'risk matrix', crossing the frequency and the consequences of accidents. This paper presents both methodologies and an application on an ethylene oxide storage

  17. Compact fluorescent lamp phosphors in accidental radiation monitoring

    International Nuclear Information System (INIS)

    Murthy, K. V. R.; Pallavi, S. P.; Ghildiyal, R.; Parmar, M. C.; Patel, Y. S.; Ravi Kumar, V.; Sai Prasad, A. S.; Natarajan, V.; Page, A. G.

    2006-01-01

    The application of lamp phosphors for accidental dosimetry is a new concept. Since the materials used in fluorescent lamps are good photo luminescent materials, if one can either use the inherent defects present in the phosphor or add suitable modifiers to induce thermoluminescence (TL) in these phosphors, then the device (fluorescent lamp) can be used as an accidental dosemeter. In continuation of our search for a suitable phosphor material, which can serve both as an efficient lamp phosphor and as a good radiation monitoring device, detailed examination has been carried out on cerium and terbium-doped lanthanum phosphate material. A 90 Sr beta source with 50 mCi strength (1.85 GBq) was used as the irradiation source for TL studies. The TL response as a function of dose received was examined for all phosphors used and it was observed that the intensity of the TL peak vs. dose received was a linear function in the dose range 0.1-200 Gy in each case. Incidentally LaPO 4 :Ce,Tb is a component of the compact fluorescent lamp marketed recently as an energy bright light source. Besides having very good luminescence efficiency, good dosimetric properties of these phosphors render them useful for their use in accidental dosimetry also. (authors)

  18. Variation of rain intensity and drop size distribution with General Weather Patterns (GWL)

    Science.gov (United States)

    Ghada, Wael; Buras, Allan; Lüpke, Marvin; Menzel, Annette

    2017-04-01

    Short-duration rainfall extremes may cause flash floods in certain catchments (e.g. cities or fast responding watersheds) and pose a great risk to affected communities. In order to predict their occurrence under future climate change scenarios, their link to atmospheric circulation patterns needs to be well understood. We used a comprehensive data set of meteorological data (temperature, rain gauge precipitation) and precipitation spectra measured by a disdrometer (OTT PARSIVEL) between October 2008 and June 2010 at Freising, southern Germany. For the 21 months of the study period, we integrated the disdrometer spectra over intervals of 10 minutes to correspond to the temporal resolution of the weather station data and discarded measurements with air temperatures below 0°C. Daily General Weather Patterns ("Großwetterlagen", GWL) were downloaded from the website of the German Meteorological Service. Out of the 29 GWL, 14 were included in the analysis for which we had at least 12 rain events during our study period. For the definition of a rain event, we tested different lengths of minimum inter-event times and chose 30 min as a good compromise between number and length of resulting events; rain events started when more than 0.001 mm/h (sensitivity of the disdrometer) were recorded. The length of the rain events ranged between 10 min and 28 h (median 130 min) with the maximum rain intensity recorded being 134 mm/h on 24-07-2009. Seasonal differences were identified for rain event average intensities and maximum intensities per event. The influence of GWL on rain properties such as rain intensity and drop size distribution per time step and per event was investigated based on the above mentioned rain event definition. Pairwise Wilcoxon-tests revealed that higher rain intensity and larger drops were associated with the GWL "Low over the British Isles" (TB), whereas low rain intensities and less drops per interval were associated with the GWL "High over Central Europe

  19. Modelling of the tritium dispersion from postulated accidental release of nuclear power plants

    International Nuclear Information System (INIS)

    Soares, Abner Duarte; Simoes Filho, Francisco Fernando Lamego; Cunha, Tatiana Santos da; Aguiar, Andre Silva de; Lapa, Celso Marcelo Franklin

    2011-01-01

    This study has the aim to assess the impact of accidental release of tritium postulate from a nuclear power reactor through environmental modeling of aquatic resources. In order to do that it was used computational models to simulation of tritium dispersion caused by an accident in a Candu reactor located in the ongoing Angra 3 site. The Candu reactor is one that uses heavy water (D 2 O) as moderator and coolant of the core. It was postulated, then, the LOCA accident (without fusion), where was lost 66 m3 of soda almost instantaneously. This inventory contained 35 P Bq and was released a load of 9.7 TBq/s in liquid form near the Itaorna beach, Angra dos Reis - RJ. The models mentioned above were applied in two scenarios (plant stopped or operating) and showed a tritium plume with specific activities larger than the reference level for seawater (1.1 MBq/m 3 ) during the first 14 days after the accident. (author)

  20. [Optimize dropping process of Ginkgo biloba dropping pills by using design space approach].

    Science.gov (United States)

    Shen, Ji-Chen; Wang, Qing-Qing; Chen, An; Pan, Fang-Lai; Gong, Xing-Chu; Qu, Hai-Bin

    2017-07-01

    In this paper, a design space approach was applied to optimize the dropping process of Ginkgo biloba dropping pills. Firstly, potential critical process parameters and potential process critical quality attributes were determined through literature research and pre-experiments. Secondly, experiments were carried out according to Box-Behnken design. Then the critical process parameters and critical quality attributes were determined based on the experimental results. Thirdly, second-order polynomial models were used to describe the quantitative relationships between critical process parameters and critical quality attributes. Finally, a probability-based design space was calculated and verified. The verification results showed that efficient production of Ginkgo biloba dropping pills can be guaranteed by operating within the design space parameters. The recommended operation ranges for the critical dropping process parameters of Ginkgo biloba dropping pills were as follows: dropping distance of 5.5-6.7 cm, and dropping speed of 59-60 drops per minute, providing a reference for industrial production of Ginkgo biloba dropping pills. Copyright© by the Chinese Pharmaceutical Association.

  1. Lambda-dropping

    DEFF Research Database (Denmark)

    Danvy, Olivier; Schultz, Ulrik Pagh

    1997-01-01

    Lambda-lifting a functional program transforms it into a set of recursive equations. We present the symmetric transformation: lambda-dropping. Lambda-dropping a set of recursive equations restores block structure and lexical scope.For lack of scope, recursive equations must carry around all...... the parameters that any of their callees might possibly need. Both lambda-lifting and lambda-dropping thus require one to compute a transitive closure over the call graph:• for lambda-lifting: to establish the Def/Use path of each free variable (these free variables are then added as parameters to each...... of the functions in the call path);• for lambda-dropping: to establish the Def/Use path of each parameter (parameters whose use occurs in the same scope as their definition do not need to be passed along in the call path).Without free variables, a program is scope-insensitive. Its blocks are then free...

  2. Detecting spatiotemporal clusters of accidental poisoning mortality among Texas counties, U.S., 1980 – 2001

    Directory of Open Access Journals (Sweden)

    Harris Ann

    2004-10-01

    Full Text Available Abstract Background Accidental poisoning is one of the leading causes of injury in the United States, second only to motor vehicle accidents. According to the Centers for Disease Control and Prevention, the rates of accidental poisoning mortality have been increasing in the past fourteen years nationally. In Texas, mortality rates from accidental poisoning have mirrored national trends, increasing linearly from 1981 to 2001. The purpose of this study was to determine if there are spatiotemporal clusters of accidental poisoning mortality among Texas counties, and if so, whether there are variations in clustering and risk according to gender and race/ethnicity. The Spatial Scan Statistic in combination with GIS software was used to identify potential clusters between 1980 and 2001 among Texas counties, and Poisson regression was used to evaluate risk differences. Results Several significant (p Conclusion The findings of the present study provide evidence for the existence of accidental poisoning mortality clusters in Texas, demonstrate the persistence of these clusters into the present decade, and show the spatiotemporal variations in risk and clustering of accidental poisoning deaths by gender and race/ethnicity. By quantifying disparities in accidental poisoning mortality by place, time and person, this study demonstrates the utility of the spatial scan statistic combined with GIS and regression methods in identifying priority areas for public health planning and resource allocation.

  3. Involving Parents in Indicated Early Intervention for Childhood PTSD Following Accidental Injury

    Science.gov (United States)

    Cobham, Vanessa E.; March, Sonja; De Young, Alexandra; Leeson, Fiona; Nixon, Reginald; McDermott, Brett; Kenardy, Justin

    2012-01-01

    Accidental injuries represent the most common type of traumatic event to which a youth is likely to be exposed. While the majority of youth who experience an accidental injury will recover spontaneously, a significant proportion will go on to develop Post-Traumatic Stress Disorder (PTSD). And yet, there is little published treatment outcome…

  4. La prevención de accidentes

    Directory of Open Access Journals (Sweden)

    Chinchilla, M.

    1966-02-01

    Full Text Available Working accidents have a high moral and material impact, and are often easy to avoid, at least in about half the cases. Hence it is most important that campaigns for the reduction of these accidents should be correctly planned, so that such campaigns should not merely result in additional expense, and in a lowering of staff morale, when workers find themselves operating in an unpleasant and dangerous activity. In addition to special requirements, which may be studied in a later paper, and which must necessarily cover a very wide number of alternative cases, there are circumstances of a general nature, such as financial and moral consequences, and psychological repercussions, which influence the prevention of accidents and are the subject of this article.La notable repercusión moral y material que tienen los accidentes de trabajo y la fácil evitación de los mismos, por lo menos en la mitad de los casos, hacen sumamente importante que las campañas de prevención de accidentes estén bien orientadas y proyectadas, para evitar que se traduzcan, únicamente, en un gasto más y en una disminución de la moral del personal, al ver, éste, que está situado en medio de un ambiente desagradable y peligroso. Además de las normas particulares, que pueden ser objeto de otro trabajo posterior, y que han de ser forzosamente amplias, debido a la multiplicidad de factores que intervienen, hay, sin embargo, unas consideraciones de carácter general, tales como repercusiones económicas y morales y factores psicológicos que influyen en la prevención de accidentes y que son objeto del presente artículo.

  5. Medical management of accidentally exposed individuals

    International Nuclear Information System (INIS)

    Nenot, J.C.

    1998-01-01

    Bone marrow aplasia is one of the main syndromes following a high dose accidental radiation exposure. Whilst transfusion and bone marrow transplantation have been used with some success starting with the first treatments of accident victims, other therapeutic strategies are needed. With the development of experimental and clinical haematology, promising new approaches to the treatment of aplasia have appeared. New trends for the treatment of haemopoietic injury based on bone marrow transplantation rely on new sources of compatible donor cells, such as cord blood, on the selection of immature haemopoietic cells and on new transplant regimens. Haemopoietic growth factors stimulate the proliferation and/or differentiation of haemopoietic progenitors and, possibly, stem cells. Furthermore, they act on the functions of mature cells. Currently, they have specific uses in haematology related to their role in the regulation of growth and in the differentiation of haemopoietic progenitor cells. Growth factors have already been used for the treatment of accidental radiation induced aplasia and lessons have been learned from their medical management and followup. (author)

  6. Medical management of accidentally exposed individuals

    Energy Technology Data Exchange (ETDEWEB)

    Nenot, Jean-Claude [CEA Centre d`Etudes de Fontenay-aux-Roses, 92 (France). Inst. de Protection et de Surete Nucleaire

    1997-12-31

    Bone marrow aplasia is one of the main syndromes following a high dose accidental radiation exposure. Although both transfusion and bone marrow transplantation have been used with some success since the first treatments of patients, other therapeutic strategies are needed. New promising approaches of the treatment of aplasia have appeared with the development of experimental and clinical hematology. Some new trends for the treatment of the hematopoietic injury based on bone marrow transplantation rely on new sources of compatible donor cells, such as cord blood, on the selection of immature haemopoietic cells and on new transplant regimens. The hematopoietic growth factors stimulate proliferation and/or differentiation of hematopoietic progenitors and possibly stem cells. Furthermore, they act on the functions of mature cells. They have now specific uses in hematology, related to their role in the regulation of growth and differentiation of hematopoietic progenitor cells. Some growth factors have already been used for the treatment of accidental radiation-induced aplasia and lessons have been learned from their medical management and follow-up. (author) 30 refs.

  7. I.C.A.R.: tool of intercomparison of actions for the rehabilitation in post-accidental phase

    International Nuclear Information System (INIS)

    Reales, N.; Cessac, B.

    2006-01-01

    In the event of a nuclear crisis, from the emergency to the post -accidental phase, decision makers may need specific information to choose a rehabilitation strategy among the available options. As the post accidental phase constitutes a very complex situation, involving many stakes at different levels, technical experts must be able to provide clear and argued recommendations adapted to the decision makers demand. In order to fit this problematic and to enhance its expertise capacities, I.R.S.N. is currently developing a coherent package of operational decision -aiding tools. Among them, I.C.A.R. is a new interactive software used to investigate the likely consequences of a range of recovery options for the post -accidental phase. This tool is based on an intercomparison methodology of relevant technical and radiological indicators related to the implementation of rehabilitation strategies and the associated consequences I.C.A.R. is composed of 4 main sub-modules: The scenario of accident module, used to define the characteristics of the accident and of the contaminated environment (date, deposited radionuclides). The radiological diagnosis module provides indicators related to the radiological effectiveness of the rehabilitation strategies (gain of exposure of various groups of population, contamination of the environment and the food products).The construction of rehabilitation strategies module, used to build new strategies from existing rehabilitation options and to insert them in the comparison process. The technical assessment module, used to compare some technical criteria related to the implementation of selected rehabilitation strategies (human and materials means, duration, amount of generated waste). According to the use made of I.C.A.R. two main axes were developed: accessibility and flexibility. So structure, calculation speed and user-interface of I.C.A.R. allow an intuitive, simple and convivial use. For example, the graphic mode is largely used to

  8. Investigation of the quality of stored red blood cells after simulated air drop in the maritime environment.

    Science.gov (United States)

    Meli, Athinoula; Hancock, Vicky; Doughty, Heidi; Smedley, Steve; Cardigan, Rebecca; Wiltshire, Michael

    2018-02-01

    Maritime medical capability may be compromised by blood resupply. Air-dropped red blood cells (RBCs) is a possible mitigation factor. This study set out to evaluate RBC storage variables after a simulated parachute air drop into the sea, as limited data exist. The air load construction for the air drop of blood was subject to static drop assessment to simulate a worst-case parachute drop scenario. One control and two test Golden Hour shipping containers were each packaged with 10 RBC units. The control box was not dropped; Test Boxes 1 and 2 were further reinforced with waterproof boxes and underwent a simulated air drop on Day 7 or Day 8 postdonation, respectively. One day after the drop and once a week thereafter until Day 43 of storage, RBCs from each box were sampled and tested for full blood counts, hemolysis, adenosine triphosphate, 2,3-diphosphoglycerate, pH, extracellular potassium, glucose, lactate, deformability, and RBC microvesicles. The packaging configuration completed the air drop with no water ingress or physical damage. All units met UK specifications for volume, hemoglobin, and hemolysis. There were no significant differences for any of the variables studied between RBCs in the control box compared to RBCs in Test Boxes 1 and 2 combined over storage. The test proved that the packaging solution and the impact of a maritime air drop as performed in this study, on Day 7 or Day 8 postdonation, did not affect the in vitro quality of RBCs in SAGM over storage for 35 days. © 2017 AABB.

  9. Controlling charge on levitating drops.

    Science.gov (United States)

    Hilger, Ryan T; Westphall, Michael S; Smith, Lloyd M

    2007-08-01

    Levitation technologies are used in containerless processing of materials, as microscale manipulators and reactors, and in the study of single drops and particles. Presented here is a method for controlling the amount and polarity of charge on a levitating drop. The method uses single-axis acoustic levitation to trap and levitate a single, initially neutral drop with a diameter between 400 microm and 2 mm. This drop is then charged in a controllable manner using discrete packets of charge in the form of charged drops produced by a piezoelectric drop-on-demand dispenser equipped with a charging electrode. The magnitude of the charge on the dispensed drops can be adjusted by varying the voltage applied to the charging electrode. The polarity of the charge on the added drops can be changed allowing removal of charge from the trapped drop (by neutralization) and polarity reversal. The maximum amount of added charge is limited by repulsion of like charges between the drops in the trap. This charging scheme can aid in micromanipulation and the study of charged drops and particles using levitation.

  10. Accidental injuries and cutaneous contaminations during general ...

    African Journals Online (AJOL)

    Conclusion: This study has demonstrated that cutaneous, percutaneous, and mucous membrane exposure to patients blood and body fluids are common events during general surgical operations. Most accidental injuries were due to solid suture needle-sticks, mostly injured personnel were the primary operating surgeons, ...

  11. On the accuracy, uniqueness and implication of dimensionless accidental relations between fundamental constants

    International Nuclear Information System (INIS)

    Bahran, M.; Univ. of Oklahoma, Norman-OK,

    2002-01-01

    Ibrahim et al(1) found an accidental formula relating the gravitational coupling constant, the electromagnetic fine structure constant and the proton to electron mass ratio. This work comments on such relation, in particular it studies the accuracy, uniqueness and unification implication of such accidental relation.(author)

  12. Accidental sulphuric acid poisoning in a newborn | Abdulkadir ...

    African Journals Online (AJOL)

    Accidental sulphuric acid poisoning in a newborn. I Abdulkadir, L Hassan, F Abdullahi, FD Akeredolu, S Purdue, M Okpe, AM Sobowale, OA Adewumi, U Abdullahi, MA Onadiran, TT Sholadoye, S Baba, WN Ogala ...

  13. An accidental death due to electric grinder: Dupatta as a strangulation hazard

    OpenAIRE

    Deepak Herald D′Souza; Vina R Vaswani; Kishor Kumar Badiadka; Venkat Krishna Shenoy; Boban Babu

    2013-01-01

    Accidents could occur at home in any age group. Accidental ligature strangulation in adults could be prevented. We are reporting a case of a woman who died in her kitchen due to accidental strangulation by her dupatta while working with the electric grinder. This case highlights the need to educate the people about the safety and potential hazards of these machines.

  14. Dynamics of deforming drops

    OpenAIRE

    Bouwhuis, W.

    2015-01-01

    Liquid drops play a dominant role in numerous industrial applications, such as spray coating, spray painting, inkjet printing, lithography processes, and spraying/sprinkling in agriculture or gardening. In all of these examples, the generation, flight, impact, and spreading of drops are separate stages of the corresponding industrial processes, which are all thoroughly studied for many years. This thesis focuses on drop dynamics, impact phenomena, Leidenfrost drops, and pouring flows. Based o...

  15. Dynamic evaluation of environmental impact due to tritium accidental release from the fusion reactor

    International Nuclear Information System (INIS)

    Nie, Baojie; Ni, Muyi; Jiang, Jieqiong; Wu, Yican

    2015-01-01

    As one of the key safety issues of fusion reactors, tritium environmental impact of fusion accidents has attracted great attention. In this work, the dynamic tritium concentrations in the air and human body were evaluated on the time scale based on accidental release scenarios under the extreme environmental conditions. The radiation dose through various exposure pathways was assessed to find out the potential relationships among them. Based on this work, the limits of HT and HTO release amount for arbitrary accidents were proposed for the fusion reactor according to dose limit of ITER. The dynamic results aim to give practical guidance for establishment of fusion emergency standard and design of fusion tritium system. - Highlights: • Dynamic tritium concentration in the air and human body evaluated on the time scale. • Different intake forms and relevant radiation dose assessed to find out the potential relationships. • HT and HTO release amount limits for arbitrary accidents proposed for the fusion reactor according to dose limit

  16. Cytogenetic biological dosimetry. Dose estimative in accidental exposure

    International Nuclear Information System (INIS)

    Santos, O.R. dos; Campos, I.M.A. de.

    1988-01-01

    The methodology of cytogenetic biological dosimetry is studied. The application in estimation of dose in five cases of accidental exposure is reported. An hematological study and culture of lymphocytes is presented. (M.A.C.) [pt

  17. Scanning drop sensor

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Jian; Xiang, Chengxiang; Gregoire, John

    2017-05-09

    Electrochemical experiments are performed on a collection of samples by suspending a drop of electrolyte solution between an electrochemical experiment probe and one of the samples that serves as a test sample. During the electrochemical experiment, the electrolyte solution is added to the drop and an output solution is removed from the drop. The probe and collection of samples can be moved relative to one another so the probe can be scanned across the samples.

  18. Theoretical and experimental investigation on adaptability of charcoal beds to containment filter venting in Italian nuclear power plant

    International Nuclear Information System (INIS)

    Caropreso, G.; Leonardi, A.; Perna, W.; Sgalambro, G.

    1989-01-01

    The work has been divided into three parts. The first one gives a description of the facilities under investigation during some selected accidental conditions, also described. The second part, which consists of an experimental work, tries to identify the behavior of charcoal beds in terms of pressure drop vs the aerosol mass loading and of aerosol retention efficiency. On the basis of the experimental findings, the prediction of the behavior of the real beds is carried out in the third part, as regards the pressure drop through the beds, related to the selected accident scenarios. In addition in this last part the results of a preliminary evaluation of the maximum decay power picked up by the beds without reaching the carbon self-ignition temperature have been reported

  19. Measuring the visual salience of alignments by their non-accidentalness.

    Science.gov (United States)

    Blusseau, S; Carboni, A; Maiche, A; Morel, J M; Grompone von Gioi, R

    2016-09-01

    Quantitative approaches are part of the understanding of contour integration and the Gestalt law of good continuation. The present study introduces a new quantitative approach based on the a contrario theory, which formalizes the non-accidentalness principle for good continuation. This model yields an ideal observer algorithm, able to detect non-accidental alignments in Gabor patterns. More precisely, this parameterless algorithm associates with each candidate percept a measure, the Number of False Alarms (NFA), quantifying its degree of masking. To evaluate the approach, we compared this ideal observer with the human attentive performance on three experiments of straight contours detection in arrays of Gabor patches. The experiments showed a strong correlation between the detectability of the target stimuli and their degree of non-accidentalness, as measured by our model. What is more, the algorithm's detection curves were very similar to the ones of human subjects. This fact seems to validate our proposed measurement method as a convenient way to predict the visibility of alignments. This framework could be generalized to other Gestalts. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Modelling for radiological and radioecological consequences of an accidental radionuclide release at Sea

    International Nuclear Information System (INIS)

    Paschoa, A.S.

    1997-01-01

    Full text: Scenarios concerning accidental releases of radionuclides into water bodies can be found in the open literature, mostly in connection with nuclear power plants located either onshore or inland. However, meager attention has been given to nuclear reactors used as energy sources for propulsion at sea, which are also subject to accidents. Such potential accidents may involve the loss of part of the reactor core to the surrounding water body. In addition of the initial instantaneous releases, one can estimate delayed source terms based on the rate at which radionuclides are dissolved or leached from the solidified material, like part of the core or structural materials in contact with water. Most of such solidified material might be a mixture of uranium, zirconium, iron, calcium, silica, fission and activation products, and transuranium elements as oxides, forming a glassy type solid. Transport models were used to calculate radionuclide concentrations in water resulting from short and delayed source terms. Oceanographic data used in the calculations were taken either from the open literature or from unclassified reports of the Brazilian Navy, being, however, as generic as possible. Time-dependent concentration functions for radionuclides in aquatic food following an accidental release reflect the net result of intake and elimination processes. However, to avoid the complexities of multiple parameters involved in such processes, the model accounts only for trophic transfer of radionuclides, and yet avoids the necessity of analyzing the details of each transfer step used to determine fish, crustacea, molluscs and seaweed accumulation. Swimming and other aquatic sports are not included in the model used for dose calculations because of theirs relatively low importance in comparison with the pathways concerning ingestion of aquatic food

  1. Scanning drop sensor

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Jian; Xiang, Chengxiang; Gregoire, John M.; Shinde, Aniketa A.; Guevarra, Dan W.; Jones, Ryan J.; Marcin, Martin R.; Mitrovic, Slobodan

    2017-05-09

    Electrochemical or electrochemical and photochemical experiments are performed on a collection of samples by suspending a drop of electrolyte solution between an electrochemical experiment probe and one of the samples that serves as a test sample. During the electrochemical experiment, the electrolyte solution is added to the drop and an output solution is removed from the drop. The probe and collection of samples can be moved relative to one another so the probe can be scanned across the samples.

  2. Personal protective clothing against accidental immersion

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, David; Tipton, Michael [Surrey Univ., Robens Inst. of Health and Safety, Guildford (United Kingdom)

    1997-12-31

    The requirements for protective clothing against accidental immersion are discussed and the advantages and limitations of the main types of immersion protection available are analysed. The variety of designs available reflects the various circumstances under which they may be used. In broad terms in the offshore industry these include the following activities: normal work without risk of immersion but with a possible need to abandon the rig or ship; work in areas where there is risk of accidentally falling into the sea; flying over the sea in a helicopter. The first response to sudden immersion in sea water, which must usually be considered to be cold, is a sudden gasp often followed by an immediate phase of uncontrolled breathing. Since control of ones breathing between and under the breaking waves is essential to staying alive, this is a critical time. After surviving this initial ``cold shock`` phase, the effects of body heat loss become hazardous. Protection against hypothermia has been the priority for those providing survival suits and protective clothing while the hazard of the immediate response to cold immersion has been unrecognised to a large extent. (UK)

  3. An accidental death due to electric grinder: Dupatta as a strangulation hazard

    Directory of Open Access Journals (Sweden)

    Deepak Herald D′Souza

    2013-01-01

    Full Text Available Accidents could occur at home in any age group. Accidental ligature strangulation in adults could be prevented. We are reporting a case of a woman who died in her kitchen due to accidental strangulation by her dupatta while working with the electric grinder. This case highlights the need to educate the people about the safety and potential hazards of these machines.

  4. Risk assessment for stonecutting enterprises Accidental risks in the course of petroleum production and stone extraction

    Science.gov (United States)

    Aleksandrova, A. J.; Timofeeva, S. S.

    2018-01-01

    The paper is devoted to the assessment of accidental risks occurring at the works engaged in stone extracting and petroleum production. Two basic kinds of accidents common for stone extracting and petroleum production have been chosen to be discussed in the part under consideration. The most dangerous accidental situation characteristic for a stone milling line is an unsanctioned explosion, UE, of blasting agents used for the development of stone deposits. The analysis of a risk occurrence in certain accidental situations is to be carried out. With reference to petroleum extraction, a combustibles and lubricants (C & L) explosion is the most dangerous of characteristic accidental situations. To reveal the most probable causes of accidental situations to be realized, a graph of cause and effect relations has been constructed for each of the accidental situations most probable causes to real situation of an accident. Disasters of a natural origin are the most probable causes of unsanctioned explosions at the deposits of stone raw materials. Technology related natural disasters are the most probable causes of unsanctioned explosions to be realized at multiple well platforms engaged in petroleum production.

  5. Analysis of a hypothetical dropped spent nuclear fuel shipping cask impacting a floor mounted crush pad

    International Nuclear Information System (INIS)

    Hawkes, B.D.; Uldrich, E.D.

    1998-03-01

    A crush pad has been designed and analyzed to absorb the kinetic energy of a hypothetically dropped spent nuclear fuel shipping cask into a 44-ft. deep cask unloading pool at the Idaho Chemical Processing Plant. The 110-ton Large Cell Cask was assumed to be accidentally dropped onto the parapet of the unloading pool, causing the cask to tumble through the pool water and impact the floor mounted crush pad with the cask's top corner. The crush pad contains rigid polyurethane foam, which was modeled in a separate computer analysis to simulate the manufacturer's testing of the foam and to determine the foam's stress and strain characteristics. This computer analysis verified that the foam was accurately represented in the analysis to follow. A detailed non-linear, dynamic finite element analysis was then performed on the crush pad and adjacent pool structure to assure that a drop of this massive cask does not result in unacceptable damage to the storage facility. Additionally, verification was made that the crush pad adequately protects the cask from severe impact loading. At impact, the cask has significant vertical, horizontal and rotational velocities. The crush pad absorbs much of the energy of the cask through plastic deformation during primary and secondary impacts. After the primary impact with the crush pad, the cask still has sufficient energy to rebound and rotate until it impacts the pool wall. An assessment is made of the damage to the crush pad and pool wall and of the impact loading on the cask

  6. Accidental poisoning with detomidine and butorphanol.

    Science.gov (United States)

    Hannah, N

    2010-09-01

    This is a case report concerning a veterinarian who spilled detomidine and butorphanol on dermatitic hands while sedating a horse. This resulted in acute poisoning from which the patient spontaneously recovered with supportive management. Veterinarians often suffer from occupational dermatitis and handle strong sedatives with no gloves while working around unpredictable animals. Thus, this group is at risk of accidental self-poisoning from this method.

  7. accidental injuries in children (physical child abuse)

    African Journals Online (AJOL)

    2016-12-06

    Dec 6, 2016 ... are often due to minor accidental injuries. However ... In dark-skinned children, bruises may be confused with café-au-lait spots. .... A bruise should not be examined in isolation if reason- ... dren with intellectual disability, such as autism and hy- ... opmental stage, social and environmental factors includ-.

  8. 21 CFR 1002.20 - Reporting of accidental radiation occurrences.

    Science.gov (United States)

    2010-04-01

    ...: Accidental Radiation Occurrence Reports (HFZ-240), Office of Communication, Education, and Radiation Programs, 9200 Corporate Blvd., Rockville, MD 20850, and the reports and their envelopes shall be distinctly...

  9. Mortalidad por accidentes de tránsito en Bayamo, Cuba 2011

    Directory of Open Access Journals (Sweden)

    Arlines Piña-Tornés

    Full Text Available Con el objetivo de describir la mortalidad por accidentes de tránsito en Bayamo, Cuba, en el año 2011 se realizó una revisión de los pacientes lesionados y fallecidos a causa de accidentes de tránsito, registrados en Hospital Carlos M. de Céspedes. Se atendieron en emergencias 1365 lesionados, predominando el grupo etario de 25 a 44 años con 372 pacientes (27,3%, y el sexo masculino con 1071 (78,5%. Fallecieron 46 personas, en su mayoría del mismo grupo de edad y de sexo masculino. Los traumatismos múltiples (52,6% y cráneofaciales (34,2% fueron las localizaciones predominantes. Se destacaron los atropellos por vehículo de motor con mortalidad del 26,3%. En conclusión, la mortalidad por accidentes de tránsito predomina en adultos jóvenes masculinos; cuyas consecuencias fatales son debido a traumatismos múltiples por atropellos.

  10. Mortalidad intrahospitalaria por accidente cerebrovascular

    OpenAIRE

    Federico Rodríguez Lucci; Virginia Pujol Lereis; Sebastián Ameriso; Guillermo Povedano; María F. Díaz; Alejandro Hlavnicka; Néstor A. Wainsztein; Sebastián F. Ameriso

    2013-01-01

    La mortalidad global por accidente cerebrovascular (ACV) ha disminuido en las últimas tres décadas, probablemente debido a un mejor control de los factores de riesgo vascular. La mortalidad hospitalaria por ACV ha sido tradicionalmente estimada entre 6 y 14% en la mayoría de las series comunicadas. Sin embargo, los datos de ensayos clínicos recientes sugieren que esta cifra sería sustancialmente menor. Se revisaron datos de pacientes internados con diagnóstico de ACV del Banco de Datos de Str...

  11. Clinical study of lesions caused by accidental local exposure to ionizing radiations

    International Nuclear Information System (INIS)

    Menoux, A.M.

    1977-01-01

    During the last few years the radiopathology service of the Curie Foundation has admitted more than a hundred patients who were followed and treated for irradiation or suspected irradiation after a work accident. Accidents followed by clinical symptoms account for about half the cases examined. Some of these clinical signs were benign whereas others developed very seriously, all possible conditions between these two extremes being represented. This report neglects cases of high total exposure and deals only with those of partial irradiation where local symptoms predominate, usually at the distal extremities of the upper limbs and exceptionally at the root or distal extremity of the lower limbs. Six clinical cases were selected as particularly revealing and are discussed below: accidental exposure of both hands to an iridium-192 source; chronic exposure to X-rays (left hand and right lower half-lip); accidental exposure of the right hand and antero-external face of the right thigh to a iridium-192 source; acute accidental exposure of the left hand to X-rays emitted under 50 kV; accidental exposure of both hands to cobalt-60 radiation; radiolesions of the left lower limb following a critical power excursion (gamma rays and neutrons) [fr

  12. Accidentes fuera del trabajo: análisis en el campamento minero de Toquepala 2002-2003

    Directory of Open Access Journals (Sweden)

    Raúl Gomero Cuadra

    2005-06-01

    Full Text Available En general, todas las empresas desarrollan programas para evitar o minimizar los accidentes del trabajo. Sin embargo, existe escasa información técnica relacionado a la prevalencia y costos derivados de los accidentes fuera del trabajo, lo que dificulta el análisis del problema. Objetivo: Revisar y analizar los descansos médicos en los trabajadores de nuestro campamento minero generados por accidentes considerados como particulares o fuera del trabajo. Materiales y métodos: El presente trabajo tiene un diseño transversal periódico, realizado en el Servicio de Salud Ocupacional del Hospital Toquepala. Los diagnósticos médicos fueron informados según el CIE-10 de la OMS. Para la clasificación de accidentes fuera del trabajo, se siguió la del programa de Loss Control Management del DNV, a la cual se le realizaron modificaciones de acuerdo al criterio y experiencia de los autores. Se revisaron 468 y 570 boletas de descanso médico generadas en los años 2002 y 2003 respectivamente. Resultados: Correspondieron al año 2002, 88 (18,8% descansos de accidentes fuera del trabajo, mientras que en el año 2003 fueron 99 (17,37%. La etiología de los accidentes fuera del trabajo fueron: de Transporte 11 (12,5% en el año 2002 y 12 (12,12% en el año 2003; del Hogar 25 (28,41% en el año 2002 y 20 (20,2% en el año 2003; Públicos 21 (23,86% en el año 2002 y 36 (36,36% en el año 2003. Conclusiones: Tenemos valores altos de accidentes fuera del trabajo con relación al número total de accidentes en nuestra empresa en los años 2002 y 2003, sin embargo, ninguno fatal. Además debemos orientar programas preventivos dirigidos hacia la seguridad vial y la buena práctica de deportes. Concluimos que es necesario incorporar el análisis de los accidentes fuera del trabajo con incapacidad temporal dentro del estudio de la morbilidad como parte del Diagnóstico de la Situación de Salud Laboral que confecciona el Médico ocupacional o del Trabajo

  13. DROP TAIL AND RED QUEUE MANAGEMENT WITH SMALL BUFFERS:STABILITY AND HOPF BIFURCATION

    Directory of Open Access Journals (Sweden)

    Ganesh Patil

    2011-06-01

    Full Text Available There are many factors that are important in the design of queue management schemes for routers in the Internet: for example, queuing delay, link utilization, packet loss, energy consumption and the impact of router buffer size. By considering a fluid model for the congestion avoidance phase of Additive Increase Multiplicative Decrease (AIMD TCP, in a small buffer regime, we argue that stability should also be a desirable feature for network performance. The queue management schemes we study are Drop Tail and Random Early Detection (RED. For Drop Tail, the analytical arguments are based on local stability and bifurcation theory. As the buffer size acts as a bifurcation parameter, variations in it can readily lead to the emergence of limit cycles. We then present NS2 simulations to study the effect of changing buffer size on queue dynamics, utilization, window size and packet loss for three different flow scenarios. The simulations corroborate the analysis which highlights that performance is coupled with the notion of stability. Our work suggests that, in a small buffer regime, a simple Drop Tail queue management serves to enhance stability and appears preferable to the much studied RED scheme.

  14. Accidental Kähler moduli inflation

    International Nuclear Information System (INIS)

    Maharana, Anshuman; Rummel, Markus; Sumitomo, Yoske

    2015-01-01

    We study a model of accidental inflation in type IIB string theory where inflation occurs near the inflection point of a small Kähler modulus. A racetrack structure helps to alleviate the known concern that string-loop corrections may spoil Kähler Moduli Inflation unless having a significant suppression via the string coupling or a special brane setup. Also, the hierarchy of gauge group ranks required for the separation between moduli stabilization and inflationary dynamics is relaxed. The relaxation becomes more significant when we use the recently proposed D-term generated racetrack model

  15. Patterns of accidental deaths in Kuwait: a retrospective descriptive study from 2003-2009.

    Science.gov (United States)

    Al-Kandary, Nadia; Al-Waheeb, Salah

    2015-03-28

    Accidents are a preventable cause of death. Unfortunately it accounts for a large number of deaths in many societies. In Kuwait, road traffic accidents (RTA) is the leading cause of death in young people. The study investigated the patterns of accidental deaths in Kuwait, one of the Gulf States which incorporates a wide variety of multi-ethnic communities. The study was retrospective from 2003-2009. Data of forensic cases were collected from the general department of criminal evidence (GDCE) in the ministry of interior (MOI).We attempted to find out causes of accidental death and the prevelance of each cause. Furthermore, the relationship of demographic factors (eg. Age, sex, marital status and nationality) with each cause of accidental death in Kuwait were studied. The material of this study constituted a total of 4886 reported accidental deaths referred for Medico-legal examination. Road traffic accidents was by far the most prevalent cause of death (64.6%) followed by fall from height (13.1%). Poisoning and mine explosions were amongst the least common causes. The government of Kuwait needs to take strong measures to promote safety in the workplace and households by educational campaigns.

  16. Accidentes en el hogar

    Directory of Open Access Journals (Sweden)

    Nereida Pacios Alfonso

    1999-04-01

    Full Text Available Se realiza un estudio descriptivo de los accidentes domésticos ocurridos durante un año en la población de un consultorio del Médico de la Familia. Resultan más afectados los sujetos del sexo femenino y los grupos en edades extremas de la vida. El horario de la tarde fue el más peligroso. La relación con el uso de bebidas alcohólicas estuvo ausente en menores de 15 años y ancianos; en adultos jóvenes el dato requiere de otros estudios. Las contusiones por caídas fue el tipo más frecuente de lesión; los miembros superiores, la región corporal más afectada. Hubo secuelas en la quinta parte de los lesionados. Sólo cuatro de cada diez accidentes ocurridos se diagnostican en consulta. Más de la mitad de la morbilidad es oculta y cada lesionado pierde un promedio de 10 días de vida plenaA descriptive study of those home accidents reported by the population of a family physician´s office during a year was conducted. Females and the group at extreme ages of life were the most affected. Afternions were more dangerous. Drinking was not present among patients under 15 and aged people. As to young adults, this datum should be further studied. Contusions caused by falls were the most frequent type of injuries, whereas the upper limbs were the most injured. A fifth of these had sequelae. Only 4 accidents out of 10 were diagnosed at the physician´s office. More than falf of morbidity was hidden and every injured person lost an average of 10 days of full life

  17. Hanging drop crystal growth apparatus

    Science.gov (United States)

    Naumann, Robert J. (Inventor); Witherow, William K. (Inventor); Carter, Daniel C. (Inventor); Bugg, Charles E. (Inventor); Suddath, Fred L. (Inventor)

    1990-01-01

    This invention relates generally to control systems for controlling crystal growth, and more particularly to such a system which uses a beam of light refracted by the fluid in which crystals are growing to detect concentration of solutes in the liquid. In a hanging drop apparatus, a laser beam is directed onto drop which refracts the laser light into primary and secondary bows, respectively, which in turn fall upon linear diode detector arrays. As concentration of solutes in drop increases due to solvent removal, these bows move farther apart on the arrays, with the relative separation being detected by arrays and used by a computer to adjust solvent vapor transport from the drop. A forward scattering detector is used to detect crystal nucleation in drop, and a humidity detector is used, in one embodiment, to detect relative humidity in the enclosure wherein drop is suspended. The novelty of this invention lies in utilizing angular variance of light refracted from drop to infer, by a computer algorithm, concentration of solutes therein. Additional novelty is believed to lie in using a forward scattering detector to detect nucleating crystallites in drop.

  18. Main problems of external monitoring in the accidental zone

    International Nuclear Information System (INIS)

    Gavrikov, O.K.; Gul'din, A.N.; Komarov, V.I.; Malkov, V.L.; Smirnov, N.V.; Sukhoruchkin, A.K.; Proskuryakov, A.G.

    1989-01-01

    Operational experience of the external monitoring service during emergency response is analysed as applied to the problems of optimization of environmental monitoring under accidental conditions. Problems of rapid and strategical environmental radiation monitoring are considered

  19. Accidentes biológicos en estudiantes de medicina de una universidad peruana: prevalencia, mecanismos y factores de riesgo

    Directory of Open Access Journals (Sweden)

    Elizabeth Inga

    2010-03-01

    Full Text Available Introducción: Una de las más serias amenazas que enfrentan los estudiantes de medicina durante su práctica clínica es la posibilidad de exposición a accidentes biológicos, debido en la mayoría de los casos a la inexperiencia y el escaso desarrollo de las habilidades manuales. Objetivos: Establecer la frecuencia, mecanismos, circunstancias y factores de riesgo de los accidentes biológicos ocurridos entre estudiantes de medicina. Diseño: Estudio descriptivo observacional de corte transversal. Institución: Facultad de Medicina, Universidad Nacional Mayor de San Marcos, Lima, Perú. Participantes: Estudiantes de medicina. Metodología: Se aplicó una encuesta estructurada anónima, voluntaria y autoadministrada. Principales medidas de resultados: Accidentes biológicos. Resultados: En total fueron 307 entrevistados. La prevalencia de accidentes biológicos en la población estudiada fue de 51,5% (158/307. La media de accidentes biológicos en el último año fue de 1,06. El 91,1% de los estudiantes del último año presentó al menos un accidente biológico, versus 11,9% en los estudiantes del primer año. Los estudiantes del último año informaron con más frecuencia accidentes de riesgo alto para transmisión de infecciones, siendo 47,6% por pinchazo con objeto punzocortante, y 80,6% tuvo exposición a sangre; los accidentes de riesgo alto son mucho más frecuentes en quirófanos y sala de partos (51,9%. Conclusiones: La prevalencia de accidentes biológicos fue 51,5%, siendo el pinchazo la forma más frecuente. Es necesario desarrollar estrategias que permitan velar por la bioseguridad de los estudiantes de medicina.

  20. Comparison of intracranial computed tomographic (CT) findings in pediatric abusive and accidental head trauma

    International Nuclear Information System (INIS)

    Hymel, K.P.; Rumack, C.M.; Hay, T.C.; Strain, J.D.; Jenny, C.

    1997-01-01

    Background. Child abuse specialists rely heavily on diagnostic neuroimaging. Objectives. Study objectives were: (1) to compare the frequencies of six specific intracranial CT abnormalities in accidental and non-accidental pediatric head trauma, and (2) to assess interobserver agreement regarding these CT findings. Materials and methods. Three pediatric radiologists blindly and independently reviewed cranial CT scans of pediatric patients who sustained closed head trauma between 1991 and 1994. All patients were less than 4 years of age. Study cases included thirty-nine (50 %) with non-accidental head trauma and thirty-nine (50 %) with accidental head trauma. Each scan was evaluated for the presence or absence of the following six intracranial findings: (1) interhemispheric falx hemorrhage, (2) subdural hemorrhage, (3) large (non-acute) extra-axial fluid, (4) basal ganglia edema, (5) posterior fossa hemorrhage, and (6) frontal-parietal shearing tear(s). Interobserver agreement was calculated as the percentage of total cases in which all reviewers agreed a specific CT finding was present or absent. Diagnosis required independent agreement by all three pediatric radiologists. The frequencies of these six intracranial CT abnormalities were compared between the two study groups by Chi-square analysis and Fisher's exact test. Results. Interobserver agreement between radiologists was greater than 80 % for all lesions evaluated, with the exception of frontal-parietal shearing tear(s). Interhemispheric falx hemorrhage, subdural hemorrhage, large (non-acute) extra-axial fluid, and basal ganglia edema were discovered significantly more frequently in non-accidental trauma (P ≤.05). Conclusion. Although not specific for child abuse, discovery of these intracranial CT abnormalities in young patients should prompt careful evaluation of family and injury circumstances for indicators of non-accidental trauma. (orig.). With 6 figs., 2 tabs

  1. Letalidad por accidentes de trabajo en Villa Clara

    Directory of Open Access Journals (Sweden)

    Miguel Gómez Vital

    1999-01-01

    Full Text Available Se valora la problemática de la letalidad por accidentes laborales en la provincia de Villa Clara, en el período comprendido entre 1987 y 1997. Se determinan las principales causas, y fue la conducta negligente del individuo la que más incidió. En los últimos años de la década del 80 se registraron más cantidad de muertes por accidentes de trabajo, los que ocurrieron fundamentalmente en el puesto laboral. Queda puntualizado el importante rol del equipo médico en instituciones laborales.The problem of letality from working accidents in the province of Villa Clara from 1987 to 1997 was evaluated. The main causes were also determined. Individual negligent behaviour proved to be the first cause. More deaths from working accidents were registered late in the 1980s. Most of these accidents occurred at the working place. It was stressed the important role played by the medical team at the working institutions

  2. Suicide and accidental deaths in children and adolescents in England and Wales, 2001-2010.

    Science.gov (United States)

    Windfuhr, Kirsten; While, David; Hunt, Isabelle M; Shaw, Jenny; Appleby, Louis; Kapur, Nav

    2013-12-01

    To investigate the impact of narrative verdicts on suicide statistics among 10-19-year-olds; to identify the number and rate of suicide and accidental deaths, particularly in 10-14-year-olds. National cohort study. England and Wales. Mid-year population estimates from the Office for National Statistics (ONS) were used to calculate rates per 100,000 population for suicide (undetermined and suicide verdicts) and accidental deaths (poisoning, hanging) for those aged 10-14 and 15-19. Trends in rates over time (2001-2010) were investigated using Poisson regression. Interaction tests were carried out to determine differences in trends between the two time periods (2001-2005 and 2006-2010). There were 1523 suicides (2.25/100,000). Suicide rates were highest in those aged 15-19 years (4.04/100,000) and in males (3.14/100,000). Between 2001 and 2010, rates significantly decreased among those aged 15-19 years (incidence rate-ratio (IRR): 0.95; 95% CI 0.93 to 0.97), with no change in rates of accidental deaths (IRR: 1.01, 95% CI 0.95 to 1.07). However, there was a significant interaction between the two time periods for accidental poisonings (2001-2005: IRR: 0.79 (95% CI 0.69 to 0.91); 2006-2010: IRR: 1.01 (95% CI 0.89 to 1.15), interaction p=0.012) and accidental hangings (2001-2005: IRR: 0.93 (95% CI 0.76 to 1.14); 2006-2010: IRR: 1.25 (95% CI 1.04 to 1.49), interaction=0.01) Undetermined deaths significantly decreased among females aged 15-19 yeras (IRR: 0.93; 95% CI 0.88 to 0.98). There were no significant trends among 10-14-year-olds. Rates of suicide are higher among older adolescents and males. There was a significant fall in suicide rates in males aged 15-19 years that was not accounted for by changes in rates of accidental death. The absence of a significant trend in suicide or accidental deaths in those aged 10-14 years may have been the result of small numbers. However, monitoring should continue to identify longitudinal trends in all young people.

  3. Vibration-Induced Climbing of Drops

    Science.gov (United States)

    Brunet, P.; Eggers, J.; Deegan, R. D.

    2007-10-01

    We report an experimental study of liquid drops moving against gravity, when placed on a vertically vibrating inclined plate, which is partially wetted by the drop. The frequency of vibrations ranges from 30 to 200 Hz, and, above a threshold in vibration acceleration, drops experience an upward motion. We attribute this surprising motion to the deformations of the drop, as a consequence of an up or down symmetry breaking induced by the presence of the substrate. We relate the direction of motion to contact angle measurements. This phenomenon can be used to move a drop along an arbitrary path in a plane, without special surface treatments or localized forcing.

  4. Drop Tower Physics

    Science.gov (United States)

    Dittrich, William A.

    2014-01-01

    The drop towers of yesteryear were used to make lead shot for muskets, as described in "The Physics Teacher" in April 2012. However, modern drop towers are essentially elevators designed so that the cable can "break" on demand, creating an environment with microgravity for a short period of time, currently up to nine seconds at…

  5. Accidental poisoning with autumn crocus.

    Science.gov (United States)

    Gabrscek, Lucija; Lesnicar, Gorazd; Krivec, Bojan; Voga, Gorazd; Sibanc, Branko; Blatnik, Janja; Jagodic, Boris

    2004-01-01

    We describe a case of a 43-yr-old female with severe multiorgan injury after accidental poisoning with Colchicum autumnale, which was mistaken for wild garlic (Allium ursinum). Both plants grow on damp meadows and can be confused in the spring when both plants have leaves but no blossoms. The autumn crocus contains colchicine, which inhibits cellular division. Treatment consisted of supportive care, antibiotic therapy, and granulocyte-directed growth factor. The patient was discharged from the hospital after three weeks. Three years after recovery from the acute poisoning, the patient continued to complain of muscle weakness and intermittent episodes of hair loss.

  6. Results of dose calculations for NET accidental and normal operation releases of tritium and activation products

    International Nuclear Information System (INIS)

    Raskob, W.; Hasemann, I.

    1992-08-01

    This report documents conditions, data and results of dose calculations for accidental and normal operation releases of tritium and activation products, performed within the NET subtask SEP2.2 ('NET-Benchmark') of the European Fusion Technology Programme. For accidental releases, the computer codes UFOTRI and COSYMA for assessing the radiological consequences, have been applied for both deterministic and probabilistic calculations. The influence on dose estimates of different release times (2 minutes / 1 hour), two release heights (10 m / 150 m), two chemical forms of tritium (HT/HTO), and two different model approaches for the deposition velocity of HTO on soil was investigated. The dose calculations for normal operation effluents were performed using the tritium model of the German regulatory guidelines, parts of the advanced dose assessment model NORMTRI still under development, and the statistical atmospheric dispersion model ISOLA. Accidental and normal operation source terms were defined as follows: 10g (3.7 10 15 Bq) for accidental tritium releases, 10 Ci/day (3.7 10 11 Bq/day) for tritium releases during normal operation and unit releases of 10 9 Bq for accidental releases of activation products and fission products. (orig./HP) [de

  7. Dosimetric significance of cytogenetic examinations in human accidental over exposures

    International Nuclear Information System (INIS)

    Doloy-Biola, M.T.; Lego, R.; Ducatez, G.; Lepetit, J.; Bourguignon, M.

    1975-01-01

    The damage to 13 workers following accidental exposures was assessed from lymphocyte chromosomal aberrations, and the results compared with those supplied by physical dosimetry and the clinical syndromes [fr

  8. Accidental transection of flexometallic endotracheal tube during partial maxillectomy

    Directory of Open Access Journals (Sweden)

    Sushma D Ladi

    2011-01-01

    Full Text Available We report a rare case of an 18-year-old female patient in whom accidental sectioning of flexometallic endotracheal tube occurred during partial maxillectomy for mass lesion under general anaesthesia. She was managed successfully by tracheostomy.

  9. Computer code to assess accidental pollutant releases

    International Nuclear Information System (INIS)

    Pendergast, M.M.; Huang, J.C.

    1980-07-01

    A computer code was developed to calculate the cumulative frequency distributions of relative concentrations of an air pollutant following an accidental release from a stack or from a building penetration such as a vent. The calculations of relative concentration are based on the Gaussian plume equations. The meteorological data used for the calculation are in the form of joint frequency distributions of wind and atmospheric stability

  10. Drop "impact" on an airfoil surface.

    Science.gov (United States)

    Wu, Zhenlong

    2018-05-17

    Drop impact on an airfoil surface takes place in drop-laden two-phase flow conditions such as rain and icing, which are encountered by wind turbines or airplanes. This phenomenon is characterized by complex nonlinear interactions that manifest rich flow physics and pose unique modeling challenges. In this article, the state of the art of the research about drop impact on airfoil surface in the natural drop-laden two-phase flow environment is presented. The potential flow physics, hazards, characteristic parameters, droplet trajectory calculation, drop impact dynamics and effects are discussed. The most key points in establishing the governing equations for a drop-laden flow lie in the modeling of raindrop splash and water film. The various factors affecting the drop impact dynamics and the effects of drop impact on airfoil aerodynamic performance are summarized. Finally, the principle challenges and future research directions in the field as well as some promising measures to deal with the adverse effects of drop-laden flows on airfoil performance are proposed. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Limits to radioactive effluents and countermeasures in accidental situations

    International Nuclear Information System (INIS)

    Nowotny, G.; Gonzalez, A.

    1978-01-01

    The paper discusses the criteria used by the Argentine Atomic Energy Commission, as competent authority, to set limits to radioactive effluents from nuclear installations. It also discusses the selection of action levels for carrying out countermeasures in accidental situations. (author)

  12. Accidental Childhood Poisoning in Enugu, South‑East, Nigeria

    African Journals Online (AJOL)

    Accidental childhood poisoning is one of the recognized causes of ... are those undergoing the oral phase of their psychological development. .... Palm oil ingestion and induction of emesis were the most commonly used ... poisoning. Kerosene is found in most homes in Nigeria as it is the ... Ingestion of coconut water. 2. 3.1.

  13. Natural convection accidental conditions in nuclear power plants

    International Nuclear Information System (INIS)

    Delmastro, D.F.; Clausse, A.

    1990-01-01

    Under certain conditions, wether accidental or in nuclear reactor design, a nuclear reactor core may be found to be refrigerated by a fluid in natural circulation. Before the possible density waves phenomenon occurrence, it is essential to have a good knowledge of the flow evolution and thermohydraulic variables under these conditions. (Author) [es

  14. Accidental Childhood Poisoning in Enugu, South‑East, Nigeria ...

    African Journals Online (AJOL)

    Background: Accidental childhood poisoning is one of the recognized causes of morbidity and mortality in children under the age of 5 years worldwide. The prevalence and type of substance ingested vary from place to place and over time. Aim: This study was conducted with the aim of ascertaining the frequency and ...

  15. Vortex flow in acoustically levitated drops

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Z.L.; Xie, W.J. [Department of Applied Physics, Northwestern Polytechnical University, Xi' an 710072 (China); Wei, B., E-mail: bbwei@nwpu.edu.cn [Department of Applied Physics, Northwestern Polytechnical University, Xi' an 710072 (China)

    2011-08-29

    The internal flow of acoustically levitated water drops is investigated experimentally. This study reveals a kind of vortex flow which rotates in the meridional plane of the levitated drop. The magnitude of fluid velocity is nearly vanishing at the drop center, whereas it increases toward the free surface of a levitated drop until the maximum value of about 80 mm/s. A transition of streamline shapes from concentric circles to ellipses takes place at the distance of about 1.2 mm from the drop center. The fluid velocity distribution is plotted as a function of polar angle for seven characteristic streamlines. -- Highlights: → We experimentally observe the internal flow of acoustically levitated water drops. → We present a fascinating structure of vortex flow inside the levitated water drop. → This vortex flow rotates around the drop center in the meridional plane. → Velocity distribution information of this vortex flow is quantitatively analyzed.

  16. Vortex flow in acoustically levitated drops

    International Nuclear Information System (INIS)

    Yan, Z.L.; Xie, W.J.; Wei, B.

    2011-01-01

    The internal flow of acoustically levitated water drops is investigated experimentally. This study reveals a kind of vortex flow which rotates in the meridional plane of the levitated drop. The magnitude of fluid velocity is nearly vanishing at the drop center, whereas it increases toward the free surface of a levitated drop until the maximum value of about 80 mm/s. A transition of streamline shapes from concentric circles to ellipses takes place at the distance of about 1.2 mm from the drop center. The fluid velocity distribution is plotted as a function of polar angle for seven characteristic streamlines. -- Highlights: → We experimentally observe the internal flow of acoustically levitated water drops. → We present a fascinating structure of vortex flow inside the levitated water drop. → This vortex flow rotates around the drop center in the meridional plane. → Velocity distribution information of this vortex flow is quantitatively analyzed.

  17. FACTORES DE RIESGO QUE OCASIONAN ACCIDENTES LABORALES EN EL PERSONAL DE ENFERMERÍA DE UNA CLÍNICA ACREDITADA DE LA CIUDAD DE AREQUIPA, 2007-2008

    OpenAIRE

    GARCIA SUTTA, PATRICIA CONCEPCION

    2014-01-01

    FACTORES DE RIESGO CONCEPTUALIZACIÓN TIPOS RIESGOS NO MECÁNICOS RUIDOS RADIACIONES IONIZANTES ILUMINACIÓN CALOR FRÍO RIESGOS FÍSICOS MECÁNICOS RIESGOS QUÍMICOS RIESGOS ERGONÓMICOS POSTURA RIESGOS BIOLÓGICOS CARGA DE TRABAJO LABORAL DEFINICIÓN ACCIDENTES LABORALES ACCIDENTE CAUSAS BÁSICAS Y CAUSAS INMEDIATAS ACCIDENTES LABORALES CAUSAS DE LOS ACCIDENTES TIPOS DE ACCIDENTE TIPOS DE ACCIDENTES LABORALES

  18. Modeling of the dispersion of tritium from postulated accidental releases from nuclear power plants

    International Nuclear Information System (INIS)

    Aguiar, Andre Silva de; Simoes Filho, Francisco Fernando Lamego; Lapa, Celso Marcelo Franklin; Alvim, Antonio Carlos Marques; Soares, Abner Duarte

    2013-01-01

    This study has the aim to assess the impact of accidental release of tritium postulate from a nuclear power reactor through environmental modeling of aquatic resources. In order to do that it was used computational models of hydrodynamics and transport for the simulation of tritium dispersion caused by an accident in a CANDU reactor located in the ongoing Angra 3 site. It was postulated, then, the LOCA - Loss of Coolant Accident -, accident in the emergency cooling system of the nucleus ( without fusion), where was lost 66m 3 of soda almost instantaneously. This inventory contained 35 PBq and was released a load of 9.7 TBq/s in liquid form near the Itaorna beach, Angra dos Reis - RJ. The models mentioned above were applied in two scenarios ( plant stopped or operating) and showed a tritium plume with specific activities larger than the reference level for seawater (1.1MBq/m 3 ), during the first 14 days after the accident. The main difference between the scenario without and with seawater recirculation (pumping and discharge) is based on the enhancement of dilution of the highest concentrations in the last one. This dilution enhancement resulting in decreasing concentrations was observed only during the first two weeks, when they ranged from 1x10 9 to 5x10 5 Bq/m 3 close to the Itaorna beach spreading just to Sandri Island. After 180 days, the plume could not be detected anymore in the bay, because their activities would be lower than the minimum detectable value ( 3 ). (author)

  19. Sandia National Laboratories cask drop test programme: a demonstration of fracture mechanics principles for the prevention of brittle fracture

    International Nuclear Information System (INIS)

    McConnell, P.; Sorenson, K.B.

    1995-01-01

    Sandia National Laboratories recently completed a cask drop test programme. The aims of the programme were (1) to demonstrate the applicability of a fracture mechanics-based methodology for ensuring cask integrity, and (2) to assess the viability of using a ferritic materials for cask containment. The programme consisted of four phases: (i) materials characterisation; (ii) non-destructive examination of the cask; (iii) finite element analyses of the drop events; and (iv) a series of drop tests of a ductile iron cask. The first three phases of the programme provided information for fracture mechanics analyses and predictions for the drop test phase. The drop tests were nominally based upon the IAEA 9 m drop height hypothetical accident scenario although one drop test was from 18 m. All tests were performed in the side drop orientation at a temperature of -29 o C. A circumferential, mid-axis flaw was introduced into the cask body for each drop test. Flaw depth ranged from 19 to 76 mm. Steel saddles were welded to the side wall of the cask to enhance the stresses imposed upon the cask in the region of the introduced flaw. The programme demonstrated the applicability of a fracture mechanics methodology for predicting the conditions under which brittle fracture may occur and thereby the utility of fracture mechanics design for ensuring cask structural integrity by ensuring an appropriate margin of safety. Positive assessments of ductile iron for cask containment and the quality of the casting process for producing ductile iron casks were made. The results of this programme have provided data to support IAEA efforts to develop brittle fracture acceptance criteria for cask containment. (author)

  20. Leading global projects for professional and accidental project leaders

    CERN Document Server

    Moran, Robert T

    2008-01-01

    This book is a must-read for anyone responsible for projects and initiatives that span functional and geographical divides. Authors Moran and Youngdahl bring extensive experience and learning from industry practice to present a clear and straightforward treatment of the leadership skills and knowledge required to lead projects that are global in nature. They have written the first book of its kind to address the three essential skills of global project leaders - strategic project management, project leadership, and cross-cultural leadership. The authors argue that global project leadership is an essential skill in our project-based world and that we are all either intentional or accidental project leaders. Intentional project leaders pursue formal project management education and even certification whereas accidental project leaders find themselves leading global projects and initiatives as a result of a special assignment or promotion. Moran and Youndahl have found that the vast majority of global projects ...

  1. Non-accidental injury: a review of the radiology

    International Nuclear Information System (INIS)

    Carty, H.

    1997-01-01

    There have been many descriptions of the radiological features of non-accidental injury since John Caffey introduced the concept of inflicted injury and initially described some of the patterns of injury. Since then, our understanding of the radiologically detectable injuries has increased. This article provides a review of our current understanding of the lesions. (orig.)

  2. Modelling of tritium dispersion from postulated accidental release of nuclear power plants

    International Nuclear Information System (INIS)

    Soares, Abner Duarte

    2010-01-01

    This study has the aim to assess the impact of accidental release of tritium postulate from a nuclear power reactor through environmental modeling of aquatic resources. In order to do that it was used computational models of hydrodynamics and transport for the simulation of tritium dispersion caused by an accident in a CANDU reactor located in the ongoing Angra 3 site. This exercise was accomplished with the aid of a code system (SisBAHIA) developed in the Rio de Janeiro Federal University (COPPE/UFRJ). The CANDU reactor is one that uses heavy water (D 2 O) as moderator and coolant of the core. It was postulated, then, the LOCA (Loss of Coolant Accident) accident in the emergency cooling system of the nucleus (without fusion), where was lost 66 m 3 of soda almost instantaneously. This inventory contained 35 PBq and was released a load of 9.7 TBq/s in liquid form near the Itaorna beach, Angra dos Reis - RJ. The models mentioned above were applied in two scenarios (plant stopped and operating) and showed a tritium plume with specific activities larger than the reference level for seawater (1.1 MBq/m 3 ) during the first 14 days after the accident. The main difference between the scenario without and with seawater recirculation (pumping and discharge) is based on the enhancement of dilution of the highest concentrations in the last one. This dilution enhancement resulting in decreasing concentrations was observed only during the first two weeks, when they ranged from 1x10 9 to 5x10 5 Bq/m 3 close to the Itaorna beach spreading just to Sandri Island. After 180 days, the plume could not be detected anymore in the bay, because their activities would be lower than the minimum detectable value ( 3 ). (author)

  3. Accidental Beam Losses and Protection in the LHC

    Science.gov (United States)

    Schmidt, R.; Working Group On Machine Protection

    2005-06-01

    At top energy (proton momentum 7 TeV/c) with nominal beam parameters, each of the two LHC proton beams has a stored energy of 350 MJ threatening to damage accelerator equipment in case of accidental beam loss. It is essential that the beams are properly extracted onto the dump blocks in case of failure since these are the only elements that can withstand full beam impact. Although the energy stored in the beams at injection (450 GeV/c) is about 15 times smaller compared to top energy, the beams must still be properly extracted in case of large accidental beam losses. Failures must be detected at a sufficiently early stage and initiate a beam dump. Quenches and power converter failures will be detected by monitoring the correct functioning of the hardware systems. In addition, safe operation throughout the cycle requires the use of beam loss monitors, collimators and absorbers. Ideas of detection of fast beam current decay, monitoring of fast beam position changes and monitoring of fast magnet current changes are discussed, to provide the required redundancy for machine protection.

  4. Accidental Beam Losses and Protection in the LHC

    International Nuclear Information System (INIS)

    Schmidt, R.; Wenninger, J.

    2005-01-01

    At top energy (proton momentum 7 TeV/c) with nominal beam parameters, each of the two LHC proton beams has a stored energy of 350 MJ threatening to damage accelerator equipment in case of accidental beam loss. It is essential that the beams are properly extracted onto the dump blocks in case of failure since these are the only elements that can withstand full beam impact. Although the energy stored in the beams at injection (450 GeV/c) is about 15 times smaller compared to top energy, the beams must still be properly extracted in case of large accidental beam losses. Failures must be detected at a sufficiently early stage and initiate a beam dump. Quenches and power converter failures will be detected by monitoring the correct functioning of the hardware systems. In addition, safe operation throughout the cycle requires the use of beam loss monitors, collimators and absorbers. Ideas of detection of fast beam current decay, monitoring of fast beam position changes and monitoring of fast magnet current changes are discussed, to provide the required redundancy for machine protection

  5. Evaluation of photovoltaic panel temperature in realistic scenarios

    International Nuclear Information System (INIS)

    Du, Yanping; Fell, Christopher J.; Duck, Benjamin; Chen, Dong; Liffman, Kurt; Zhang, Yinan; Gu, Min; Zhu, Yonggang

    2016-01-01

    Highlights: • The developed realistic model captures more reasonably the thermal response and hysteresis effects. • The predicted panel temperature is as high as 60 °C under a solar irradiance of 1000 W/m"2 in no-wind weather. • In realistic scenarios, the thermal response normally takes 50–250 s. • The actual heating effect may cause a photoelectric efficiency drop of 2.9–9.0%. - Abstract: Photovoltaic (PV) panel temperature was evaluated by developing theoretical models that are feasible to be used in realistic scenarios. Effects of solar irradiance, wind speed and ambient temperature on the PV panel temperature were studied. The parametric study shows significant influence of solar irradiance and wind speed on the PV panel temperature. With an increase of ambient temperature, the temperature rise of solar cells is reduced. The characteristics of panel temperature in realistic scenarios were analyzed. In steady weather conditions, the thermal response time of a solar cell with a Si thickness of 100–500 μm is around 50–250 s. While in realistic scenarios, the panel temperature variation in a day is different from that in steady weather conditions due to the effect of thermal hysteresis. The heating effect on the photovoltaic efficiency was assessed based on real-time temperature measurement of solar cells in realistic weather conditions. For solar cells with a temperature coefficient in the range of −0.21%∼−0.50%, the current field tests indicated an approximate efficiency loss between 2.9% and 9.0%.

  6. Coalescence collision of liquid drops I: Off-center collisions of equal-size drops

    Directory of Open Access Journals (Sweden)

    Alejandro Acevedo-Malavé

    2011-09-01

    Full Text Available The Smoothed Particle Hydrodynamics method (SPH is used here to model off-center collisions of equal-size liquid drops in a three-dimensional space. In this study the Weber number is calculated for several conditions of the droplets dynamics and the velocity vector fields formed inside the drops during the collision process are shown. For the permanent coalescence the evolution of the kinetic and internal energy is shown and also the approaching to equilibrium of the resulting drop. Depending of the Weber number three possible outcomes for the collision of droplets is obtained: permanent coalescence, flocculation and fragmentation. The fragmentation phenomena are modeled and the formation of small satellite drops can be seen. The ligament that is formed follows the “end pinching” mechanism and it is transformed into a flat structure.

  7. "Self-Shaping" of Multicomponent Drops.

    Science.gov (United States)

    Cholakova, Diana; Valkova, Zhulieta; Tcholakova, Slavka; Denkov, Nikolai; Smoukov, Stoyan K

    2017-06-13

    In our recent study we showed that single-component emulsion drops, stabilized by proper surfactants, can spontaneously break symmetry and transform into various polygonal shapes during cooling [ Denkov Nature 2015 , 528 , 392 - 395 ]. This process involves the formation of a plastic rotator phase of self-assembled oil molecules beneath the drop surface. The plastic phase spontaneously forms a frame of plastic rods at the oil drop perimeter which supports the polygonal shapes. However, most of the common substances used in industry appear as mixtures of molecules rather than pure substances. Here we present a systematic study of the ability of multicomponent emulsion drops to deform upon cooling. The observed trends can be summarized as follows: (1) The general drop-shape evolution for multicomponent drops during cooling is the same as with single-component drops; however, some additional shapes are observed. (2) Preservation of the particle shape upon freezing is possible for alkane mixtures with chain length difference Δn ≤ 4; for greater Δn, phase separation within the droplet is observed. (3) Multicomponent particles prepared from alkanes with Δn ≤ 4 plastify upon cooling due to the formation of a bulk rotator phase within the particles. (4) If a compound, which cannot induce self-shaping when pure, is mixed with a certain amount of a compound which induces self-shaping, then drops prepared from this mixture can also self-shape upon cooling. (5) Self-emulsification phenomena are also observed for multicomponent drops. In addition to the three recently reported mechanisms of self-emulsification [ Tcholakova Nat. Commun. 2017 , ( 8 ), 15012 ], a new (fourth) mechanism is observed upon freezing for alkane mixtures with Δn > 4. It involves disintegration of the particles due to a phase separation of alkanes upon freezing.

  8. The Accidental Transgressor: Morally-Relevant Theory of Mind

    Science.gov (United States)

    Killen, Melanie; Mulvey, Kelly Lynn; Richardson, Cameron; Jampol, Noah; Woodward, Amanda

    2011-01-01

    To test young children's false belief theory of mind in a morally relevant context, two experiments were conducted. In Experiment 1, children (N=162) at 3.5, 5.5, and 7.5 years of age were administered three tasks: prototypic moral transgression task, false belief theory of mind task (ToM), and an "accidental transgressor" task, which measured a…

  9. Accidental degeneracy of double Dirac cones in a phononic crystal

    KAUST Repository

    Chen, Ze-Guo; Ni, Xu; Wu, Ying; He, Cheng; Sun, Xiao-Chen; Zheng, Li-Yang; Lu, Ming-Hui; Chen, Yan-Feng

    2014-01-01

    Artificial honeycomb lattices with Dirac cone dispersion provide a macroscopic platform to study the massless Dirac quasiparticles and their novel geometric phases. In this paper, a quadruple-degenerate state is achieved at the center of the Brillouin zone in a two-dimensional honeycomb lattice phononic crystal, which is a result of accidental degeneracy of two double-degenerate states. In the vicinity of the quadruple-degenerate state, the dispersion relation is linear. Such quadruple degeneracy is analyzed by rigorous representation theory of groups. Using method, a reduced Hamiltonian is obtained to describe the linear Dirac dispersion relations of this quadruple-degenerate state, which is well consistent with the simulation results. Near such accidental degeneracy, we observe some unique properties in wave propagating, such as defect-insensitive propagating character and the Talbot effect.

  10. Accidental degeneracy of double Dirac cones in a phononic crystal

    KAUST Repository

    Chen, Ze-Guo

    2014-04-09

    Artificial honeycomb lattices with Dirac cone dispersion provide a macroscopic platform to study the massless Dirac quasiparticles and their novel geometric phases. In this paper, a quadruple-degenerate state is achieved at the center of the Brillouin zone in a two-dimensional honeycomb lattice phononic crystal, which is a result of accidental degeneracy of two double-degenerate states. In the vicinity of the quadruple-degenerate state, the dispersion relation is linear. Such quadruple degeneracy is analyzed by rigorous representation theory of groups. Using method, a reduced Hamiltonian is obtained to describe the linear Dirac dispersion relations of this quadruple-degenerate state, which is well consistent with the simulation results. Near such accidental degeneracy, we observe some unique properties in wave propagating, such as defect-insensitive propagating character and the Talbot effect.

  11. Instrumented measurements on radioactive waste disposal containers during experimental drop testing - 59142

    International Nuclear Information System (INIS)

    Quercetti, Thomas; Musolff, Andre; Mueller, Karsten

    2012-01-01

    In context with disposal container safety assessment of containers for radioactive waste the German Federal Institute for Materials Research and Testing (BAM) performed numerous drop tests in the last years. The tests were accompanied by extensive and various measurement techniques especially by instrumented measurements with strain gages and accelerometers. The instrumentation of a specimen is an important tool to evaluate its mechanical behavior during impact. Test results as deceleration-time and strain-time functions constitute a main basis for the validation of assumptions in the safety analysis and for the evaluation of calculations based on finite-element methods. Strain gauges are useful to determine the time dependent magnitude of any deformation and the associated stresses. Accelerometers are widely used for the measuring of motion i.e. speed or the displacement of the rigid cask body, vibration and shock events. In addition high-speed video technique can be used to visualize and analyze the kinematical impact scenario by motion analysis. The paper describes some selected aspects on instrumented measurements and motion analysis in context with low level radioactive waste (LLW) container drop testing. (authors)

  12. Accidental radioisotope burns - Management of late sequelae

    Directory of Open Access Journals (Sweden)

    Varghese Bipin

    2010-10-01

    Full Text Available Accidental radioisotope burns are rare. The major components of radiation injury are burns, interstitial pneumonitis, acute bone marrow suppression, acute renal failure and adult respiratory distress syndrome. Radiation burns, though localized in distribution, have systemic effects, and can be extremely difficult to heal, even after multiple surgeries. In a 25 year old male who sustained such trauma by accidental industrial exposure to Iridium192 the early presentation involved recurrent haematemesis, pancytopenia and bone marrow suppression. After three weeks he developed burns in contact areas in the left hand, left side of the chest, abdomen and right inguinal region. All except the inguinal wound healed spontaneously but the former became a non-healing ulcer. Pancytopenia and bone marrow depression followed. He was treated with morphine and NSAIDs, epidural buprinorphine and bupivicaine for pain relief, steroids, antibiotics followed by wound excision and reconstruction with tensor fascia lata(TFL flap. Patient had breakdown of abdominal scar later and it was excised with 0.5 cm margins up to the underlying muscle and the wound was covered by a latissimis dorsi flap. Further scar break down and recurrent ulcers occurred at different sites including left wrist, left thumb and right heel in the next two years which needed multiple surgical interventions.

  13. Ventricular fibrillation after accidental injection of bupivacaine into the pericardium

    NARCIS (Netherlands)

    Even, B. J.; de Jongh, R. F.; de Hert, S. G.

    1992-01-01

    A postoperative cardiac surgical patient developed ventricular fibrillation immediately after accidental pericardial injection of bupivacaine at room temperature. The possible causes, which include systemic toxicity, local vasoconstriction with myocardial ischaemia, local toxic effect of bupivacaine

  14. Accidentes de trabajo en el Hospital Clínico de la Universidad de Chile durante el año 2007

    Directory of Open Access Journals (Sweden)

    Carlos Valdés

    2011-01-01

    Full Text Available Objetivo: Conocer el número de los accidentes laborales en el Hospital Clínico de la Universidad de Chile (HCUCH el año 2007 y su caracterización de acuerdo a variables como: sexo, edad, tipo de lesión, día de la semana, mes del año, cargo desempeñado y días perdidos. Diseño: Estudio descriptivo, transversal, retrospectivo y observacional. Lugar: Hospital Clínico de la Universidad de Chile (HCUCH. Participantes: Accidentes laborales reportados entre el 1 de Enero y el 31 de Diciembre del 2007. Intervención: Se utilizó la base de datos del Registro de Notificación de Accidentes Laborales, proporcionada por el Departamento de Prevención de Riesgos del HCUCH Principales medidas de Resultados: Porcentajes y Medidas de Tendencia Central, tabuladas en una base de datos con ayuda del programa Microsoft Excel 2003 para Windows ®. Resultados: Se observan 104 accidentes laborales, con un mayor número de eventos en el personal femenino (69,2%, en el rango etareo de 30-39 años (34,3%, el tipo de lesión más frecuente fueron las contusiones policontusiones (39,4%, el grupo más accidentado fue los auxiliares y técnicos (71.1%. El estudio por días de la semana revela que hay más accidentes los días miércoles y jueves (43,27% y los meses del año con más accidentes fueron enero, agosto y diciembre. La mayor cantidad de accidentes laborales comprometen entre 1 a 5 días perdidos. Conclusiones: Durante el año 2007, se pesquisó 104 accidentes laborales, lo que significó 804 días de ausentismo. Este estudio muestra que el sexo femenino, tener entre 30-39 años y ejercer como auxiliar o técnico fueron factores de asociados al incremento de los accidentes laborales. Palabras clave: Accidentes de trabajo, ausentismo, notificación de accidentes de trabajo.

  15. Accidental bound states in the continuum in an open Sinai billiard

    Energy Technology Data Exchange (ETDEWEB)

    Pilipchuk, A.S. [Kirensky Institute of Physics, Federal Research Center KSC SB RAS, 660036 Krasnoyarsk (Russian Federation); Siberian Federal University, 660080 Krasnoyarsk (Russian Federation); Sadreev, A.F., E-mail: almas@tnp.krasn.ru [Kirensky Institute of Physics, Federal Research Center KSC SB RAS, 660036 Krasnoyarsk (Russian Federation)

    2017-02-19

    The fundamental mechanism of the bound states in the continuum is the full destructive interference of two resonances when two eigenlevels of the closed system are crossing. There is, however, a wide class of quantum chaotic systems which display only avoided crossings of eigenlevels. As an example of such a system we consider the Sinai billiard coupled with two semi-infinite waveguides. We show that notwithstanding the absence of degeneracy bound states in the continuum occur due to accidental decoupling of the eigenstates of the billiard from the waveguides. - Highlights: • Bound states in the continuum in open chaotic billiards occur to accidental vanishing of coupling of eigenstate of billiard with waveguides.

  16. Fragmentation of molten metal drop with instantaneous contact temperature below the boiling point of Na

    International Nuclear Information System (INIS)

    Inukai, S.; Sugiyama, K.; Nishimura, S.; Kinoshita, I.

    2001-01-01

    The consequence of the core disruptive accidents in metallic-fueled Na-cooled reactors is strongly affected by the feedback reactivity originating in the boiling of Na and the dispersion of molten fuel due to fuel-coolant interactions. The design of the core configuration to promote the dispersion of molten fuel is therefore very important for social acceptance. It has been recognized in this context that metallic fuel has a potentiality to make liquefied fuel with fuel pin tube even in the temperature range below the boiling point of Na. If the liquefied fuel solidified without fuel-coolant interactions in the core region, this event leads the core condition to a pessimistic scenario of re-criticality. As a basic study related to this problem, the present experimental study investigates the possibility of fragmentation of metal drop with instantaneous contact temperature below the boiling point of Na (883 C). The molten Al drop, which has a melting point of 660 C above the operational temperature range of core, was selected as a simulant of liquefied fuel in the present study. Al particles of 5 g or 0.56 g were heated up to the initial temperature ranging from 850 C to 1113 C in a crucible by using an electric heater. The molten Al drop was dropped into a sodium pool adjusted the temperature from 280 C to 499 C. The Al drop at initial temperature sufficiently higher that the boiling point of Na was observed to fragment into pieces under the condition of instantaneous contact temperature below the boiling point of Na. It is confirmed that the fragmentation is caused due to the thermal interactions between the molten Al and the Na entrapped into the drop. (author)

  17. Fragmentation of molten metal drop with instantaneous contact temperature below the boiling point of Na

    Energy Technology Data Exchange (ETDEWEB)

    Inukai, S.; Sugiyama, K. [Hokkaido Univ., Dept. of Nuclear Engineering, Sapporo (Japan); Nishimura, S.; Kinoshita, I. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    2001-07-01

    The consequence of the core disruptive accidents in metallic-fueled Na-cooled reactors is strongly affected by the feedback reactivity originating in the boiling of Na and the dispersion of molten fuel due to fuel-coolant interactions. The design of the core configuration to promote the dispersion of molten fuel is therefore very important for social acceptance. It has been recognized in this context that metallic fuel has a potentiality to make liquefied fuel with fuel pin tube even in the temperature range below the boiling point of Na. If the liquefied fuel solidified without fuel-coolant interactions in the core region, this event leads the core condition to a pessimistic scenario of re-criticality. As a basic study related to this problem, the present experimental study investigates the possibility of fragmentation of metal drop with instantaneous contact temperature below the boiling point of Na (883 C). The molten Al drop, which has a melting point of 660 C above the operational temperature range of core, was selected as a simulant of liquefied fuel in the present study. Al particles of 5 g or 0.56 g were heated up to the initial temperature ranging from 850 C to 1113 C in a crucible by using an electric heater. The molten Al drop was dropped into a sodium pool adjusted the temperature from 280 C to 499 C. The Al drop at initial temperature sufficiently higher that the boiling point of Na was observed to fragment into pieces under the condition of instantaneous contact temperature below the boiling point of Na. It is confirmed that the fragmentation is caused due to the thermal interactions between the molten Al and the Na entrapped into the drop. (author)

  18. Dynamics of deforming drops

    NARCIS (Netherlands)

    Bouwhuis, W.

    2015-01-01

    Liquid drops play a dominant role in numerous industrial applications, such as spray coating, spray painting, inkjet printing, lithography processes, and spraying/sprinkling in agriculture or gardening. In all of these examples, the generation, flight, impact, and spreading of drops are separate

  19. Accidental deposition of local anaesthetic in the subdural space ...

    African Journals Online (AJOL)

    The incidence of accidental injection of local anaesthetic into the subdural space during neuraxial blockade is rare. The presentation of unexplainable clinical signs that do not match the clinical picture of subarachnoid or intravascular injection of the local anaesthetic agent should invoke high suspicion of unintentional ...

  20. Accidental Carbon Monoxide Poisonings in Adana, Turkey: A 14-year Study

    Directory of Open Access Journals (Sweden)

    Murat Darçın

    2017-03-01

    Full Text Available Aim: Carbon monoxide (CO is often referred to as the “silent killer” because its victims cannot see it, smell it or taste it. CO is responsible for a large percentage of the accidental poisonings and deaths reported throughout the world. CO poisoning therefore is considered a serious global health threat. The aim of the present study was to describe the cases of CO poisoning in a rural areas of Adana, Turkey between 2002 and 2015 based on data collected from incident reports. Methods: The cases of accidental CO poisoning were statistically analyzed. During that period, 74 incidents occurred and 154 people were poisoned by accidental CO poisoning. Results: The results of this analysis indicate that men and adults aged ≥65 years were more likely to die from CO poisoning than others. The number of CO poisoning cases was highest during the heating season. The majority (72% of poisoning resulting in hospitalization with a life-threatening condition or death occurred within the home. Conclusion: CO poisoning is a serious danger. People must be informed about this hazard. By educating risk groups about the dangers of CO poisoning, it is possible to save many lives as well as reduce the health risks.

  1. Electrohydrodynamics of a viscous drop with inertia.

    Science.gov (United States)

    Nganguia, H; Young, Y-N; Layton, A T; Lai, M-C; Hu, W-F

    2016-05-01

    Most of the existing numerical and theoretical investigations on the electrohydrodynamics of a viscous drop have focused on the creeping Stokes flow regime, where nonlinear inertia effects are neglected. In this work we study the inertia effects on the electrodeformation of a viscous drop under a DC electric field using a novel second-order immersed interface method. The inertia effects are quantified by the Ohnesorge number Oh, and the electric field is characterized by an electric capillary number Ca_{E}. Below the critical Ca_{E}, small to moderate electric field strength gives rise to steady equilibrium drop shapes. We found that, at a fixed Ca_{E}, inertia effects induce larger deformation for an oblate drop than a prolate drop, consistent with previous results in the literature. Moreover, our simulations results indicate that inertia effects on the equilibrium drop deformation are dictated by the direction of normal electric stress on the drop interface: Larger drop deformation is found when the normal electric stress points outward, and smaller drop deformation is found otherwise. To our knowledge, such inertia effects on the equilibrium drop deformation has not been reported in the literature. Above the critical Ca_{E}, no steady equilibrium drop deformation can be found, and often the drop breaks up into a number of daughter droplets. In particular, our Navier-Stokes simulations show that, for the parameters we use, (1) daughter droplets are larger in the presence of inertia, (2) the drop deformation evolves more rapidly compared to creeping flow, and (3) complex distribution of electric stresses for drops with inertia effects. Our results suggest that normal electric pressure may be a useful tool in predicting drop pinch-off in oblate deformations.

  2. Brugada syndrome unmasked by accidental inhalation of gasoline vapors

    DEFF Research Database (Denmark)

    Kranjcec, Darko; Bergovec, Mijo; Rougier, Jean-Sébastien

    2007-01-01

    Loss-of-function mutations in the gene SCN5A can cause Brugada syndrome (BrS), which is an inherited form of idiopathic ventricular fibrillation. We report the case of a 46-year-old patient, with no previous medical history, who had ventricular fibrillation after accidental inhalation of gasoline...

  3. Individual dose due to radioactivity accidental release from fusion reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nie, Baojie [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Ni, Muyi, E-mail: muyi.ni@fds.org.cn [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Wei, Shiping [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China)

    2017-04-05

    Highlights: • Conservative early dose of different unit fusion radioactivity release were assessed. • Data of accident level in INES for fusion reactor were proposed. • Method of environmental restoration time after fusion accident was proposed. • The maximum possible accident level for ITER like fusion reactor is 6. • We need 34–52 years to live after the fusion hypothetical accident. - Abstract: As an important index shaping the design of fusion safety system, evaluation of public radiation consequences have risen as a hot topic on the way to develop fusion energy. In this work, the comprehensive public early dose was evaluated due to unit gram tritium (HT/HTO), activated dust, activated corrosion products (ACPs) and activated gases accidental release from ITER like fusion reactor. Meanwhile, considering that we cannot completely eliminate the occurrence likelihood of multi-failure of vacuum vessel and tokamak building, we conservatively evaluated the public radiation consequences and environment restoration after the worst hypothetical accident preliminarily. The comparison results show early dose of different unit radioactivity release under different conditions. After further performing the radiation consequences, we find it possible that the hypothetical accident for ITER like fusion reactor would result in a level 6 accident according to INES, not appear level 7 like Chernobyl or Fukushima accidents. And from the point of environment restoration, we need at least 69 years for case 1 (1 kg HTO and 1000 kg dust release) and 34–52 years for case 2 (1 kg HTO and 10kg–100 kg dust release) to wait the contaminated zone drop below the general public safety limit (1mSv per year) before it is suitable for human habitation.

  4. Accidental outcomes guide punishment in a "trembling hand" game.

    Directory of Open Access Journals (Sweden)

    Fiery Cushman

    Full Text Available How do people respond to others' accidental behaviors? Reward and punishment for an accident might depend on the actor's intentions, or instead on the unintended outcomes she brings about. Yet, existing paradigms in experimental economics do not include the possibility of accidental monetary allocations. We explore the balance of outcomes and intentions in a two-player economic game where monetary allocations are made with a "trembling hand": that is, intentions and outcomes are sometimes mismatched. Player 1 allocates $10 between herself and Player 2 by rolling one of three dice. One die has a high probability of a selfish outcome, another has a high probability of a fair outcome, and the third has a high probability of a generous outcome. Based on Player 1's choice of die, Player 2 can infer her intentions. However, any of the three die can yield any of the three possible outcomes. Player 2 is given the opportunity to respond to Player 1's allocation by adding to or subtracting from Player 1's payoff. We find that Player 2's responses are influenced substantially by the accidental outcome of Player 1's roll of the die. Comparison to control conditions suggests that in contexts where the allocation is at least partially under the control of Player 1, Player 2 will punish Player 1 accountable for unintentional negative outcomes. In addition, Player 2's responses are influenced by Player 1's intention. However, Player 2 tends to modulate his responses substantially more for selfish intentions than for generous intentions. This novel economic game provides new insight into the psychological mechanisms underlying social preferences for fairness and retribution.

  5. Distribución espacial de los accidentes y enfermedades relacionados con el trabajo en el Perú, 2012-2014

    Directory of Open Access Journals (Sweden)

    Akram Hernández-Vásquez

    2016-01-01

    Full Text Available Se analizaron geoespacialmente los accidentes, incidentes peligrosos y enfermedades ocupacionales que se reportaron a nivel regional en el Perú (2012-2014. 52 887 eventos se notificaron entre accidentes de trabajo (93%, incidentes peligrosos (5,1%, enfermedades ocupacionales (1% y accidentes mortales (0,9%. Se evidenciaron altas tasas de accidentes mortales en Pasco, Callao, Lima, Moquegua y Arequipa. Callao y Lima son las regiones con tasas más altas de accidentes de trabajo. Las mayores tasas de incidentes peligrosos se reportaron en Arequipa, Callao, Lima, Ica y Piura. Las enfermedades ocupacionales se distribuyeron con altas tasas en Huancavelica, Ancash, Pasco, Callao y Cusco. La explotación de minas y canteras (49,2%; seguida por la industria manufacturera (23,4%; y, la construcción (8% son las actividades económicas que concentraron elevadas tasas de enfermedades ocupacionales. Se concluye que existen altas tasas y patrones espaciales comunes de accidentabilidad en el Perú que pueden servir para enfocar intervenciones.

  6. Capillary Thinning of Particle-laden Drops

    Science.gov (United States)

    Wagoner, Brayden; Thete, Sumeet; Jahns, Matt; Doshi, Pankaj; Basaran, Osman

    2015-11-01

    Drop formation is central in many applications such as ink-jet printing, microfluidic devices, and atomization. During drop formation, a thinning filament is created between the about-to-form drop and the fluid hanging from the nozzle. Therefore, the physics of capillary thinning of filaments is key to understanding drop formation and has been thoroughly studied for pure Newtonian fluids. The thinning dynamics is, however, altered completely when the fluid contains particles, the physics of which is not well understood. In this work, we explore the impact of solid particles on filament thinning and drop formation by using a combination of experiments and numerical simulations.

  7. Atmospheric Dispersion Assessment for Potential Accidental Releases at Yonggwang Nuclear Power Plants

    International Nuclear Information System (INIS)

    Na, Man Gyun; Sim, Young Rok; Jung, Chul Kee; Lee, Goung Jin; Kim, Soong Pyung; Chung, Sung Tai

    2000-01-01

    XOQ DW code is currently used to assess the atmospheric dispersion for the routine releases of radioactive gaseous effluents at Yonggwang nuclear power plants. This code was developed based on XOQDOQ code and an additional code is required to assess the atmospheric dispersion for potential accidental releases. In order to assess the atmospheric dispersion for the accidental releases, XOQAR code has been developed by using PAVAN code that is based on Reg. Guide 1.145. The terrain data of XOQ DW code inputs and the relative concentrations (X/Q) of XOQ DW code outputs are used as the inputs of the XOQAR code through the interface with XOQ DW code. By using this code, the maximum values of X/Q at exclusion area and low population zone boundaries except for sea areas were assessed as 1.33 x 10 -4 and 7.66 x 10 -6 sec/m 3 , respectively. Through the development of this code, a code system is prepared for assessing the atmospheric dispersion for the accidental releases as well as the routine releases. This developed code can be used for other domestic nuclear power plants by modifying the terrain input data

  8. A study on fire design accidental loads for aluminum safety helidecks

    Directory of Open Access Journals (Sweden)

    Sang Jin Kim

    2016-11-01

    Full Text Available The helideck structure must satisfy the safety requirements associated with various environmental and accidental loads. Especially, there have been a number of fire accidents offshore due to helicopter collision (take-off and/or landing in recent decades. To prevent further accidents, a substantial amount of effort has been directed toward the management of fire in the safety design of offshore helidecks. The aims of this study are to introduce and apply a procedure for quantitative risk assessment and management of fires by defining the fire loads with an applied example. The frequency of helicopter accidents are considered, and design accidental levels are applied. The proposed procedures for determining design fire loads can be efficiently applied in offshore helideck development projects.

  9. Monitoring mutations in people: an in vivo study of people accidentally or occupationally exposed to ionizing radiation

    International Nuclear Information System (INIS)

    Glickman, B.W.

    1996-01-01

    Recent developments in molecular biology and medicine now permit the monitoring of mutation in humans 'in vivo'. The most commonly used approach, and the main one reported in this paper, is the study of mutations at the hypoxanthine phosphoribosyl transferase (hprt) locus in peripheral T-lymphocytes. This paper deals with evidence from the radiological accident in Goiania, Brazil (where several hundred people were accidentally exposed to cesium-137), from a study of Soviet cosmonauts, and from monozygotic twins. The conclusions from Brazil are: mutation at hprt increases with age and is higher in smokers; in adults a linear dose response was found; no radiation-induced mutational fingerprint was found; children are particularly sensitive; the level of mutation dropped over several years (probably reflecting natural T-cell turnover). The conclusions from cosmonauts are: each cosmonaut had a significantly above-average level of mutation, but this may not be due to radiation at all; no 'fingerprint' was found, and there was no apparent dependence on dose. The study of twins showed a very strong correlation of mutant frequencies between one twin and the other, but this correlation decreased with age, presumably due to environmental effects. 1 tab., 2 figs

  10. Turbulence, bubbles and drops

    NARCIS (Netherlands)

    van der Veen, Roeland

    2016-01-01

    In this thesis, several questions related to drop impact and Taylor-Couette turbulence are answered. The deformation of a drop just before impact can cause a bubble to be entrapped. For many applications, such as inkjet printing, it is crucial to control the size of this entrapped bubble. To study

  11. Accidental hand grenade blast injuries in the Transkei region of ...

    African Journals Online (AJOL)

    Case Study: Accidental hand grenade blast injuries in the Transkei region of South Africa. 348. Vol 51 No 4. SA Fam ... There is some evidence that a substantial number of small arms and hand grenades ... Unfortunately, the safety device was ...

  12. Methodology for estimating accidental radioactive releases in nuclear waste management

    International Nuclear Information System (INIS)

    Levy, H.B.

    1979-01-01

    Estimation of the risks of accidental radioactive releases is necessary in assessing the safety of any nuclear waste management system. The case of a radioactive waste form enclosed in a barrier system is considered. Two test calculations were carried out

  13. Notificación de accidentes y enfermedades laborales al Ministerio de Trabajo. Perú 2010-2014

    Directory of Open Access Journals (Sweden)

    Christian R Mejia

    Full Text Available Con el objetivo de determinar las tendencias de los accidentes y enfermedades laborales notificadas al Ministerio de Trabajo del Perú, se realizó un estudio descriptivo de datos secundarios, con los reportes extraídos de los boletines mensuales desde septiembre de 2010 a diciembre de 2014. Se notificaron a nivel nacional 54 596 accidentes laborales no mortales, las tasas de los accidentes laborales no mortales por millón de habitantes aumentaron en el período 2011- 2013 (296,5 el 2011, 955,9 el 2012 y 1176,3 el 2013, disminuyendo en el 2014 (878,9. Hubieron 674 accidentes mortales, cuyas tasas se incrementaron entre el 2011-2012 y se redujeron entre el 2013-2014. Se reportaron 346 enfermedades laborales, las más frecuentes fueron los casos de hipoacusia (77, enfermedades por posturas inadecuadas (57 y dermatitis alérgica (44; los reportes se redujeron de 6,9 en el 2011 a 2,3 en el 2014. Los reportes de enfermedades laborales fueron disminuyendo, lo que podría indicar una subnotificación importante

  14. The Bulgarian Emergency Response System for dose assessment in the early stage of accidental releases to the atmosphere

    International Nuclear Information System (INIS)

    Syrakov, D.; Veleva, B.; Prodanova, M.; Popova, T.; Kolarova, M.

    2009-01-01

    The Bulgarian Emergency Response System (BERS) is being developed in the Bulgarian National Institute of Meteorology and Hydrology since 1994. BERS is based on numerical weather forecast meteorological information and a numerical long-range dispersion model accounting for the transport, dispersion, chemical and radioactive transformations of pollutants. In the present paper, the further development of this system for a mixture of radioactive gaseous and aerosol pollutants is described. The basic module for the BERS, the numerical dispersion model EMAP, is upgraded with a 'dose calculation block'. Two scenarios for hypothetical accidental atmospheric releases from two NPPs, one in Western, and the other in Eastern Europe, are numerically simulated. The effective doses from external irradiation, from air submersion and ground shinning, effective dose from inhalation and absorbed dose by thyroid gland formed by 37 different radionuclides, significant for the early stage of a nuclear accident, are calculated as dose fields for both case studies and discussed

  15. Investigation of post-accidental management conditions. Complete final report dated July 31, 2009

    International Nuclear Information System (INIS)

    2009-01-01

    After a presentation of the process which resulted in the setting up of an investigation aimed at testing recommendations for post-accidental management, this report indicates the objectives of this investigation: to study the application of recommendations made by the CODIR-PA (Management Committee - Post-Accidental Management) to the operators of the milk sector, and to define an action plan to carry on and resume production. According to the adopted methodology, the study comprised two phases. The first one comprised an analysis of applications in the milk sector, the study of operational consequences on a zoning proposed by the CORDI-PA on the milk sector and on milk products, and the study of the acceptability and feasibility of considered options. The second phase addressed the elaboration of an action plan to carry on and resume the activity. While identifying and assessing the various risks, it identified critical issues for carrying on or resuming milk production in a contaminated territory, and defined an action plan to implement by anticipation or in the post-accidental situation

  16. Study of TSL and OSL properties of dental ceramics for accidental dosimetry applications

    International Nuclear Information System (INIS)

    Veronese, Ivan; Galli, Anna; Cantone, Marie Claire; Martini, Marco; Vernizzi, Fabrizio; Guzzi, Gianpaolo

    2010-01-01

    Interest is increasing in the development of new methodologies for accidental dose assessment, exploiting the luminescence and dosimetric properties of objects and materials which can be usually found directly on exposed subjects and/or in the contaminated area. In this work, several types of ceramics employed for dental prosthetics restoration, including both innovative materials used as sub-frames for the construction of the inner part of dental crowns (core), and conventional porcelains used for the fabrication of the external layer (veneer), were investigated with regard to their thermally and optically stimulated luminescence (TSL and OSL respectively) properties, in view of their potential application in accidental dosimetry. The sensitivity to ionizing radiation proved to strongly depend on the type and brand of ceramic, with minimum detectable dose ranging from few mGy up to several tens of mGy. A linear dose-response was observed for most of the samples. However, the luminescence signals were characterised by a significant fading, which has to be taken into account for a reliable accidental dose assessment after a radiation exposure event.

  17. Drop impact splashing and air entrapment

    KAUST Repository

    Thoraval, Marie-Jean

    2013-03-01

    Drop impact is a canonical problem in fluid mechanics, with numerous applications in industrial as well as natural phenomena. The extremely simple initial configuration of the experiment can produce a very large variety of fast and complex dynamics. Scientific progress was made in parallel with major improvements in imaging and computational technologies. Most recently, high-speed imaging video cameras have opened the exploration of new phenomena occurring at the micro-second scale, and parallel computing allowed realistic direct numerical simulations of drop impacts. We combine these tools to bring a new understanding of two fundamental aspects of drop impacts: splashing and air entrapment. The early dynamics of a drop impacting on a liquid pool at high velocity produces an ejecta sheet, emerging horizontally in the neck between the drop and the pool. We show how the interaction of this thin liquid sheet with the air, the drop or the pool, can produce micro-droplets and bubble rings. Then we detail how the breakup of the air film stretched between the drop and the pool for lower impact velocities can produce a myriad of micro-bubbles.

  18. Axisymmetric Liquid Hanging Drops

    Science.gov (United States)

    Meister, Erich C.; Latychevskaia, Tatiana Yu

    2006-01-01

    The geometry of drops hanging on a circular capillary can be determined by numerically solving a dimensionless differential equation that is independent on any material properties, which enables one to follow the change of the height, surface area, and contact angle of drops hanging on a particular capillary. The results show that the application…

  19. Insights from the pollination drop proteome and the ovule transcriptome of Cephalotaxus at the time of pollination drop production.

    Science.gov (United States)

    Pirone-Davies, Cary; Prior, Natalie; von Aderkas, Patrick; Smith, Derek; Hardie, Darryl; Friedman, William E; Mathews, Sarah

    2016-05-01

    Many gymnosperms produce an ovular secretion, the pollination drop, during reproduction. The drops serve as a landing site for pollen, but also contain a suite of ions and organic compounds, including proteins, that suggests diverse roles for the drop during pollination. Proteins in the drops of species of Chamaecyparis, Juniperus, Taxus, Pseudotsuga, Ephedra and Welwitschia are thought to function in the conversion of sugars, defence against pathogens, and pollen growth and development. To better understand gymnosperm pollination biology, the pollination drop proteomes of pollination drops from two species of Cephalotaxus have been characterized and an ovular transcriptome for C. sinensis has been assembled. Mass spectrometry was used to identify proteins in the pollination drops of Cephalotaxus sinensis and C. koreana RNA-sequencing (RNA-Seq) was employed to assemble a transcriptome and identify transcripts present in the ovules of C. sinensis at the time of pollination drop production. About 30 proteins were detected in the pollination drops of both species. Many of these have been detected in the drops of other gymnosperms and probably function in defence, polysaccharide metabolism and pollen tube growth. Other proteins appear to be unique to Cephalotaxus, and their putative functions include starch and callose degradation, among others. Together, the proteins appear either to have been secreted into the drop or to occur there due to breakdown of ovular cells during drop production. Ovular transcripts represent a wide range of gene ontology categories, and some may be involved in drop formation, ovule development and pollen-ovule interactions. The proteome of Cephalotaxus pollination drops shares a number of components with those of other conifers and gnetophytes, including proteins for defence such as chitinases and for carbohydrate modification such as β-galactosidase. Proteins likely to be of intracellular origin, however, form a larger component of drops

  20. Accidentes de trabajo en el Hospital Clínico de la Universidad de Chile durante el año 2007

    Directory of Open Access Journals (Sweden)

    Carlos Valdés

    2009-01-01

    Full Text Available Objetivo, Conocer el número de los accidentes laborales en el Hospital Clínico de la Universidad de Chile (HCUCH el año 2007 y su caracterización de acuerdo a variables como, sexo, edad, tipo de lesión, día de la semana, mes del año, cargo desempeñado y días perdidos. Diseño, Estudio descriptivo, transversal, retrospectivo y observacional. Lugar, Hospital Clínico de la Universidad de Chile (HCUCH. Participantes, Accidentes laborales reportados entre el 1 de Enero y el 31 de Diciembre del 2007. Intervención, Se utilizó la base de datos del Registro de Notificación de Accidentes Laborales, proporcionada por el Departamento de Prevención de Riesgos del HCUCH Principales medidas de Resultados, Porcentajes y Medidas de Tendencia Central, tabuladas en una base de datos con ayuda del programa Microsoft Excel 2003 para Windows ®. Resultados: Se observan 104 accidentes laborales, con un mayor número de eventos en el personal femenino (69,2%, en el rango etareo de 30-39 años (34,3%, el tipo de lesión más frecuente fueron las contusiones/policontusiones (39,4%, el grupo más accidentado fue los auxiliares y técnicos (71.1%. El estudio por días de la semana revela que hay más accidentes los días miércoles y jueves (43,27% y los meses del año con más accidentes fueron enero, agosto y diciembre. La mayor cantidad de accidentes laborales comprometen entre 1 a 5 días perdidos. Conclusiones: Durante el año 2007, se pesquisó 104 accidentes laborales, lo que significó 804 días de ausentismo. Este estudio muestra que el sexo femenino, tener entre 30-39 años y ejercer como auxiliar o técnico fueron factores de asociados al incremento de los accidentes laborales.

  1. Food allergy: practical approach on education and accidental exposure prevention.

    Science.gov (United States)

    Pádua, I; Moreira, A; Moreira, P; Barros, R

    2016-09-01

    Food allergies are a growing problem and currently the primary treatment of food allergy is avoidance of culprit foods. However, given the lack of information and education and also the ubiquitous nature of allergens, accidental exposures to food allergens are not uncommon. The fear of potential fatal reactions and the need of a proper avoidance leads in most of the cases to the limitation of leisure and social activities. This review aims to be a practical approach on education and accidental exposure prevention regarding activities like shopping, eating out, and travelling. The recommendations are focused especially on proper reading of food labels and the management of the disease, namely in restaurants and airplanes, concerning cross-contact and communication with other stakeholders. The implementation of effective tools is essential to manage food allergy outside home, avoid serious allergic reactions and minimize the disease's impact on individuals' quality of life.

  2. Análisis de las causas y consecuencias de los accidentes laborales ocurridos en dos proyectos de construcción

    Directory of Open Access Journals (Sweden)

    A. González

    Full Text Available Las labores que se realizan en los proyectos de construcción son consideradas de alto riesgo al facilitar la ocurrencia de accidentes laborales que afectan la integridad física, mental y social de los colaboradores como la productividad de las empresas. Por tal motivo, el propósito de este artículo es analizar las causas y consecuencias de los accidentes laborales ocurridos durante el segundo semestre del año 2012 en dos proyectos de construcción de Neiva, Colombia. El alcance fue de tipo documental considerando como fuente de información los soportes de los accidentes laborales reportados ante la Administradora de Riesgo Laborales (ARL; para determinar las causas que dieron origen a dichos accidentes se utilizó el modelo de Frank E. Bird. Se analizaron 117 accidentes en los que se identificaron 195 faltas de control, 136 factores personales, 112 factores del trabajo, 151 actos inseguros y 54 condiciones inseguras; lo anterior teniendo en cuenta que en algunos accidentes se presentaron más de una causa. De esta manera se concluye que el mayor porcentaje de accidentes de trabajo, ha sido generado por faltas de control seguidos por actos inseguros. Por tal motivo se recomienda la realización de programas de gestión de riesgos prioritarios, basados en una adecuada identificación de peligros, que permitan mitigar y controlar los riesgos, desarrollando a la vez en los trabajadores una cultura de autocuidado

  3. CANFLEX fuel bundle junction pressure drop

    International Nuclear Information System (INIS)

    Chung, H. J.; Chung, C. H.; Jun, J. S.; Hong, S. D.; Chang, S. K.; Kim, B. D.

    1996-11-01

    This report describes the junction pressure drop test results which are to used to determine the alignment angle between bundles to achieve the most probable fuel string pressure drop for randomly aligned bundles for use in the fuel string total pressure drop test. (author). 4 tabs., 17 figs

  4. CANFLEX fuel bundle junction pressure drop

    Energy Technology Data Exchange (ETDEWEB)

    Chung, H. J.; Chung, C. H.; Jun, J. S.; Hong, S. D.; Chang, S. K.; Kim, B. D.

    1996-11-01

    This report describes the junction pressure drop test results which are to used to determine the alignment angle between bundles to achieve the most probable fuel string pressure drop for randomly aligned bundles for use in the fuel string total pressure drop test. (author). 4 tabs., 17 figs.

  5. 49 CFR 178.603 - Drop test.

    Science.gov (United States)

    2010-10-01

    ... used for the hydrostatic pressure or stacking test. Exceptions for the number of steel and aluminum..., non-resilient, flat and horizontal surface. (e) Drop height. Drop heights, measured as the vertical... than flat drops, the center of gravity of the test packaging must be vertically over the point of...

  6. Numerical simulation of industrial and accidental release formation and transport

    Energy Technology Data Exchange (ETDEWEB)

    Piskunov, V.N.; Aloyan, A.A.; Gerasimov, V.M.; Pinaev, V.S.; Golubev, A.I.; Yanilkin, Yu.V.; Ivanov, N.V.; Nikonov, S.N.; Kharchenko, A.I. [and others

    1995-05-01

    Statement of work for contract 006 {open_quotes}Mathematical simulation of industrial and accidental release formation and transport{close_quotes} implies that the final result of the activity within this task will be VNIIEF developed techniques which will provide for the prediction of the post-accidental environment. Report [1] presents the description of physical models and calculation techniques which were chosen by VNIIEF to accomplish this task. These techniques were analysed for their capabilities, the areas of their application were defined, modifications within contract 006 were described, the results of test and methodical calculations were presented. Moreover, the experimental data were analysed over the source parameters and contamination measurements which can be used in the comparison with the calculation results. Based an these data this report compares the calculation results obtained with VNIIEF calculation techniques with the LANL-presented experimental results. The calculations which statements and results are given in section 1, included the following processes: explosion cloud ascent dynamics and jet release origin; aerosols kinetics in the release source including composite particle origin in the explosion cloud caused by radioactive substance sorption an the soil particles; contaminant transport in atmosphere and their in-site fallout due to the accidental explosions and fires; atmospheric flow dynamics and industrial contamination transfer over the complicated terrain. The calculated results were compared with the experimental data. Section 2 presents the parameters for a typical source in the explosion accidents based an the experimental results and calculated data from Section 1, as well as contamination patterns were calculated with basic technique {open_quotes}Prognosis{close_quotes}.

  7. Evaluation of accidental coincidences for time-differential Moessbauer-spectroscopy

    International Nuclear Information System (INIS)

    Alflen, M.; Meyer, W.

    1995-01-01

    The accidental coincidences of a measuring system based on time-to-amplitude conversion are considered in some detail for the case of low starting and high stopping rates. Two types of accidental coincidences are distinguished, those carrying time information and those without time information. Neglecting any deadtime effects of the detectors, analytical expressions for the calculation of the time distribution of the random coincidences are evaluated. The analytical expressions have been confirmed by Monte Carlo simulations. The procedure is applied to time-differential Moessbauer spectroscopy in order to extract the time spectra of true coincidences. The measured spectrum in a time channel turns out to be a superposition of the true spectrum (true coincidences), a time integral spectrum (random coincidences), and a weighted superposition of true spectra of other time channels (random but time carrying information). A measurement with a single line 57 Co/Rh-source and single line K[Fe(CN) 6 ].3H 2 O-absorber with stopping rates of 1 MBq shows agreement between the theoretical time-filtered spectra and the corrected measured spectra of true coincidences. ((orig.))

  8. A tree branch instead of a ligature: an unusual accidental hanging.

    Science.gov (United States)

    Vadysinghe, Amal Nishantha; Sivasubramanium, Murugupillai; Jayasooriya, Rankothge Pemasiri

    2017-12-01

    A unique case of accidental hanging due to compression of the neck of an adult by the branches of a coffee tree is reported. The decedent was a 42-year-old male who was found dead in a semi prone position on a slope. His neck was lodged in a wedge formed by two branches of a coffee tree, with his legs angled downwards on the slope. Autopsy revealed two friction abrasions located horizontally on either side of the front of the neck, just above the larynx. The findings were compatible with compression of the neck by the branches of the tree, with the body weight of the decedent contributing to compression. Subsequent complete autopsy examination confirmed the cause of death as hanging. Following an inquest the death was ruled to be accidental.

  9. Towards a user's guide to scenarios - a report on scenario types and scenario techniques

    Energy Technology Data Exchange (ETDEWEB)

    Boerjeson, Lena; Hoejer, Mattias; Dreborg, Karl-Henrik; Finnveden, Goeran [Royal Inst. of Technology, Stockholm (Sweden). Environmental Strategies Research - fms; Ekvall, Tomas [Chalmers Univ. of Technology, Goeteborg (Sweden). Dept. of Energy and Environment

    2005-11-01

    Futures studies consist of a vast variation of studies and approaches. The aim of this paper is to contribute to the understanding of for what purposes scenarios are useful and what methods and procedures are useful for furthering these purposes. We present a scenario typology with an aim to better suit the context in which the scenarios are used. The scenario typology is combined with a new way of looking at scenario techniques, i.e. practical methods and procedures for scenario development. Finally, we look at the usefulness of scenarios in the light of the scenario typology and the scenario techniques. As a start, we distinguish between three main categories of scenario studies. The classification is based on the principal questions we believe a user may want to pose about the future. The resolution is then increased by letting each category contain two different scenario types. These are distinguished by different angles of approach of the questions defining the categories. The first question, What will happen?, is responded to by Predictive scenarios. In fact, the response to a question like this will always be conditional, e.g. of a stable and peaceful world, or by a certain continuous development of some kind. We have utilized this fact when defining the two predictive scenario types, Forecasts and What-if scenarios. The second question, What can happen?, is responded to by Explorative scenarios. The scenarios are thus explorations of what might happen in the future, regardless of beliefs of what is likely to happen or opinions of what is desirable. This category is further divided into external and strategic scenarios. The final question, How can a specific target be reached?, is responded to by Normative scenarios. Such studies are explicitly normative, since they take a target as a starting point. They are often directed towards how the target could be reached. This category is divided into preserving and transforming scenarios. If the user wants to

  10. Scenario analysis of energy-based low-carbon development in China.

    Science.gov (United States)

    Zhou, Yun; Hao, Fanghua; Meng, Wei; Fu, Jiafeng

    2014-08-01

    China's increasing energy consumption and coal-dominant energy structure have contributed not only to severe environmental pollution, but also to global climate change. This article begins with a brief review of China's primary energy use and associated environmental problems and health risks. To analyze the potential of China's transition to low-carbon development, three scenarios are constructed to simulate energy demand and CO₂ emission trends in China up to 2050 by using the Long-range Energy Alternatives Planning System (LEAP) model. Simulation results show that with the assumption of an average annual Gross Domestic Product (GDP) growth rate of 6.45%, total primary energy demand is expected to increase by 63.4%, 48.8% and 12.2% under the Business as Usual (BaU), Carbon Reduction (CR) and Integrated Low Carbon Economy (ILCE) scenarios in 2050 from the 2009 levels. Total energy-related CO₂ emissions will increase from 6.7 billiontons in 2009 to 9.5, 11, 11.6 and 11.2 billiontons; 8.2, 9.2, 9.6 and 9 billiontons; 7.1, 7.4, 7.2 and 6.4 billiontons in 2020, 2030, 2040 and 2050 under the BaU, CR and ILCE scenarios, respectively. Total CO₂ emission will drop by 19.6% and 42.9% under the CR and ILCE scenarios in 2050, compared with the BaU scenario. To realize a substantial cut in energy consumption and carbon emissions, China needs to make a long-term low-carbon development strategy targeting further improvement of energy efficiency, optimization of energy structure, deployment of clean coal technology and use of market-based economic instruments like energy/carbon taxation. Copyright © 2014. Published by Elsevier B.V.

  11. Liquid-gas mass transfer at drop structures

    DEFF Research Database (Denmark)

    Matias, Natércia; Nielsen, Asbjørn Haaning; Vollertsen, Jes

    2017-01-01

    -water mass transfer, little is known about hydrogen sulfide emission under highly turbulent conditions (e.g., drop structures, hydraulic jumps). In this study, experimental work was carried out to analyze the influence of characteristics of drops on reaeration. Physical models were built, mimicking typical...... sewer drop structures and allowing different types of drops, drop heights, tailwater depths and flow rates. In total, 125 tests were performed. Based on their results, empirical expressions translating the relationship between the mass transfer of oxygen and physical parameters of drop structures were...... established. Then, by applying the two-film theory with two-reference substances, the relation to hydrogen sulfide release was defined. The experiments confirmed that the choice of the type of drop structure is critical to determine the uptake/emission rates. By quantifying the air-water mass transfer rates...

  12. Nonlinear oscillations of inviscid free drops

    Science.gov (United States)

    Patzek, T. W.; Benner, R. E., Jr.; Basaran, O. A.; Scriven, L. E.

    1991-01-01

    The present analysis of free liquid drops' inviscid oscillations proceeds through solution of Bernoulli's equation to obtain the free surface shape and of Laplace's equation for the velocity potential field. Results thus obtained encompass drop-shape sequences, pressure distributions, particle paths, and the temporal evolution of kinetic and surface energies; accuracy is verified by the near-constant drop volume and total energy, as well as the diminutiveness of mass and momentum fluxes across drop surfaces. Further insight into the nature of oscillations is provided by Fourier power spectrum analyses of mode interactions and frequency shifts.

  13. 50 CFR 23.52 - What are the requirements for replacing a lost, damaged, stolen, or accidentally destroyed CITES...

    Science.gov (United States)

    2010-10-01

    ... lost, damaged, stolen, or accidentally destroyed CITES document? 23.52 Section 23.52 Wildlife and...) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD FAUNA AND FLORA (CITES) Application..., or accidentally destroyed CITES document? (a) Purpose. A Management Authority may issue a duplicate...

  14. The 5th National Audit Project (NAP5) on accidental awareness during general anaesthesia: summary of main findings and risk factors.

    Science.gov (United States)

    Pandit, J J; Andrade, J; Bogod, D G; Hitchman, J M; Jonker, W R; Lucas, N; Mackay, J H; Nimmo, A F; O'Connor, K; O'Sullivan, E P; Paul, R G; Palmer, J H MacG; Plaat, F; Radcliffe, J J; Sury, M R J; Torevell, H E; Wang, M; Hainsworth, J; Cook, T M

    2014-10-01

    We present the main findings of the 5th National Audit Project on accidental awareness during general anaesthesia. Incidences were estimated using reports of accidental awareness as the numerator, and a parallel national anaesthetic activity survey to provide denominator data. The incidence of certain/probable and possible accidental awareness cases was ~1:19 600 anaesthetics (95% CI 1:16 700-23 450). However, there was considerable variation across subtypes of techniques or subspecialties. The incidence with neuromuscular blockade was ~1:8200 (1:7030-9700), and without it was ~1:135 900 (1:78 600-299 000). The cases of accidental awareness during general anaesthesia reported to 5th National Audit Project were overwhelmingly cases of unintended awareness during neuromuscular blockade. The incidence of accidental awareness during caesarean section was ~1:670 (1:380-1300). Two thirds (82, 66%) of cases of accidental awareness experiences arose in the dynamic phases of anaesthesia, namely induction of and emergence from anaesthesia. During induction of anaesthesia, contributory factors included: use of thiopental; rapid sequence induction; obesity; difficult airway management; neuromuscular blockade; and interruptions of anaesthetic delivery during movement from anaesthetic room to theatre. During emergence from anaesthesia, residual paralysis was perceived by patients as accidental awareness, and commonly related to a failure to ensure full return of motor capacity. One third (43, 33%) of accidental awareness events arose during the maintenance phase of anaesthesia, most due to problems at induction or towards the end of anaesthesia. Factors increasing the risk of accidental awareness included: female sex; age (younger adults, but not children); obesity; anaesthetist seniority (junior trainees); previous awareness; out-of-hours operating; emergencies; type of surgery (obstetric, cardiac, thoracic); and use of neuromuscular blockade. The following factors were

  15. The Drop Tower Bremen -Experiment Operation

    Science.gov (United States)

    Könemann, Thorben; von Kampen, Peter; Rath, Hans J.

    The idea behind the drop tower facility of the Center of Applied Space Technology and Micro-gravity (ZARM) in Bremen is to provide an inimitable technical opportunity of a daily access to short-term weightlessness on earth. In this way ZARM`s european unique ground-based microgravity laboratory displays an excellent economic alternative for research in space-related conditions at low costs comparable to orbital platforms. Many national and international ex-perimentalists motivated by these prospects decide to benefit from the high-quality and easy accessible microgravity environment only provided by the Drop Tower Bremen. Corresponding experiments in reduced gravity could open new perspectives of investigation methods and give scientists an impressive potential for a future technology and multidisciplinary applications on different research fields like Fundamental Physics, Astrophysics, Fluid Dynamics, Combus-tion, Material Science, Chemistry and Biology. Generally, realizing microgravity experiments at ZARM`s drop tower facility meet new requirements of the experimental hardware and may lead to some technical constraints in the setups. In any case the ZARM Drop Tower Operation and Service Company (ZARM FAB mbH) maintaining the drop tower facility is prepared to as-sist experimentalists by offering own air-conditioned laboratories, clean rooms, workshops and consulting engineers, as well as scientific personal. Furthermore, ZARM`s on-site apartment can be used for accommodations during the experiment campaigns. In terms of approaching drop tower experimenting, consulting of experimentalists is mandatory to successfully accomplish the pursued drop or catapult capsule experiment. For this purpose there will be a lot of expertise and help given by ZARM FAB mbH in strong cooperation to-gether with the experimentalists. However, in comparison to standard laboratory setups the drop or catapult capsule setup seems to be completely different at first view. While defining a

  16. 5th National Audit Project (NAP5) on accidental awareness during general anaesthesia: summary of main findings and risk factors.

    Science.gov (United States)

    Pandit, J J; Andrade, J; Bogod, D G; Hitchman, J M; Jonker, W R; Lucas, N; Mackay, J H; Nimmo, A F; O'Connor, K; O'Sullivan, E P; Paul, R G; Palmer, J H M G; Plaat, F; Radcliffe, J J; Sury, M R J; Torevell, H E; Wang, M; Hainsworth, J; Cook, T M

    2014-10-01

    We present the main findings of the 5th National Audit Project (NAP5) on accidental awareness during general anaesthesia (AAGA). Incidences were estimated using reports of accidental awareness as the numerator, and a parallel national anaesthetic activity survey to provide denominator data. The incidence of certain/probable and possible accidental awareness cases was ~1:19,600 anaesthetics (95% confidence interval 1:16,700-23,450). However, there was considerable variation across subtypes of techniques or subspecialities. The incidence with neuromuscular block (NMB) was ~1:8200 (1:7030-9700), and without, it was ~1:135,900 (1:78,600-299,000). The cases of AAGA reported to NAP5 were overwhelmingly cases of unintended awareness during NMB. The incidence of accidental awareness during Caesarean section was ~1:670 (1:380-1300). Two-thirds (82, 66%) of cases of accidental awareness experiences arose in the dynamic phases of anaesthesia, namely induction of and emergence from anaesthesia. During induction of anaesthesia, contributory factors included: use of thiopental, rapid sequence induction, obesity, difficult airway management, NMB, and interruptions of anaesthetic delivery during movement from anaesthetic room to theatre. During emergence from anaesthesia, residual paralysis was perceived by patients as accidental awareness, and commonly related to a failure to ensure full return of motor capacity. One-third (43, 33%) of accidental awareness events arose during the maintenance phase of anaesthesia, mostly due to problems at induction or towards the end of anaesthesia. Factors increasing the risk of accidental awareness included: female sex, age (younger adults, but not children), obesity, anaesthetist seniority (junior trainees), previous awareness, out-of-hours operating, emergencies, type of surgery (obstetric, cardiac, thoracic), and use of NMB. The following factors were not risk factors for accidental awareness: ASA physical status, race, and use or omission

  17. Report of the consultant's meeting on monitoring accidentally released radionuclides in the environment

    International Nuclear Information System (INIS)

    2001-01-01

    At an earlier Research Co-ordination Meeting (12-16 August 1991, VIC, Vienna) for the IAEA Programme on 'Rapid Instrumental and Separation Methods for Monitoring Radionuclides in Food and Environmental Samples', it was recognized that a network of analytical laboratories with specially qualified scientists is needed which will provide a timely coordinated response to any future requests for assistance from Member States. The experience gained from the International Chernobyl Project revealed that there is a need for such a closely linked group when the Member State lacks sufficient technical resource to independently perform an assessment of environmental contamination following an accidental release of radioactivity. The existence of such a network of laboratories would help to assure responsible government representatives and the general public that the Agency has additional available resources including specialized experts to perform assessments on which to base required actions for many accident scenarios and their radiological consequences. The purpose of the present Consultants' Meeting is to discuss the organization and scope of the proposed network of analytical laboratories. The Consultants should discuss the matrices and nuclides of interest at various time frames of an accidental release of radioactivity. It is also intended that the Consultants should discuss the laboratories from their experience which would have the specialized expertise needed, in both terrestrial and aquatic sample collection and analysis. Finally, it is intended that the Consultants should discuss whether it would be desirable for the Agency to produce a technical document based on the achievements of the Agency programme on 'Rapid Instrumental and Separation Methods for Monitoring Radionuclides in Food and Environmental Samples'. A Guide Book was considered essential by the participants of this Co-ordinated Research Programme because it would be a succinct form and on a common

  18. Pendent_Drop: An ImageJ Plugin to Measure the Surface Tension from an Image of a Pendent Drop

    Directory of Open Access Journals (Sweden)

    Adrian Daerr

    2016-01-01

    Full Text Available The pendent drop method for surface tension measurement consists in analysing the shape of an axisymmetric drop hanging from a capillary tube. This software is an add-on for the public domain image processing software ImageJ which matches a theoretical profile to the contour of a pendent drop, either interactively or by automatically minimising the mismatch. It provides an estimate of the surface tension, drop volume and surface area from the best matching parameters. It can be used in a headless setup. It is hosted on http://fiji.sc/List_of_update_sites with the source code on https://github.com/adaerr/pendent-drop

  19. Accidental falls in hospitalized children: an analysis of the vulnerabilities linked to the presence of caregivers.

    Science.gov (United States)

    Bagnasco, A; Sobrero, M; Sperlinga, L; Tibaldi, L; Sasso, L

    2010-06-01

    This study stemmed from the data gathered by a research conducted by the coordinator of the Department of Healthcare Services and a group of nurses involved in a research on accidental falls in hospitalized children at the "G. Gaslini" Children's Hospital and Scientific Research Institute in Genoa, Italy. The first retrospective study evaluated the accidental falls in hospitalized children referred to the three-year period 2003-2006, while the second perspective study, referred to the trimester March-May 2007, found that the main cause of falls in children was parent's distraction. The method adopted in the first phase of our study was a proactive risk analysis (The Basics of Healthcare Failure Mode and Effect Analysis), identified in the first place by the VA National Centre for Patient Safety and applied to the "Child and parent hospital admission process". This proactive risk analysis has proven to be very effective in preventing the risk of accidental falls in hospitalized children through effective communication and educational interventions. The second phase of our study consisted of two Focus Groups for accidental traumatic events. The analysis of the results of the study showed how effective communication is instrumental, not only to have a better awareness of the children and their parents during their stay in hospital, but also to implement educational sessions on prevention to reduce the risk of accidental traumatic events. The present study contributes to improve safety and the quality of care by motivating nurses to keep their attention high on falls in hospitalized children, by monitoring and the development of new risk assessment tools.

  20. Accidental fatal lung injury by compressed air: a case report.

    Science.gov (United States)

    Rayamane, Anand Parashuram; Pradeepkumar, M V

    2015-03-01

    Compressed air is being used extensively as a source of energy at industries and in daily life. A variety of fatal injuries are caused by improper and ignorant use of compressed air equipments. Many types of injuries due to compressed air are reported in the literature such as colorectal injury, orbital injury, surgical emphysema, and so on. Most of these injuries are accidental in nature. It is documented that 40 pounds per square inch pressure causes fatal injuries to the ear, eyes, lungs, stomach, and intestine. Openings of body are vulnerable to injuries by compressed air. Death due to compressed air injuries is rarely reported. Many cases are treated successfully by conservative or surgical management. Extensive survey of literature revealed no reports of fatal injury to the upper respiratory tract and lungs caused by compressed air. Here, we are reporting a fatal event of accidental death after insertion of compressed air pipe into the mouth. The postmortem findings are corroborated with the history and discussed in detail.

  1. Enfermedad preexistente, agravamiento y/o accidente de trabajo: análisis de 10 casos clínicos

    Directory of Open Access Journals (Sweden)

    Ana M.ª González Onetti

    2014-01-01

    Full Text Available En nuestro centro asistencial se han atendido en el año 2012, 1.304 primeras asistencias, de las cuales 85 fueron consideradas no accidente de trabajo/enfermedad profesional. Hemos elegido al azar 10 casos clínicos donde existió discrepancia por parte del paciente cuando los servicios médicos determinaron que la patología que sufría el paciente no era accidente de trabajo y/o agravamiento por lo que se derivó a su médico de atención primaria quien emitió parte de baja por contingencias comunes y se inició determinación de contingencias ante el INSS por parte del Servicio Andaluz de Salud. En 7 de los casos existió discrepancia entre los inspectores médicos del INSS y los servicios médicos de la mutua, en 3 de ellos se consideraron enfermedad común al existir enfermedad preexistente. De los casos analizados comprobamos que no existían criterios unificados, claros y precisos entre enfermedad preexistente, agravamiento y/o accidente de trabajo dependiendo del médico evaluador y/o médico de la mutua determinar si era o no accidente de trabajo. Si no existían antecedentes médicos por el SAS y/o bajas previas por ITCC por la misma patología o similar el INSS determino siempre la contingencia como accidente de trabajo. El tiempo medio de los 10 casos analizados entre el inicio de la determinación de contingencias y la comunicación de la resolución por parte del INSS fue de 240 días. De los 7 casos que fueron accidente de trabajo, 6 seguían en situación de baja laboral y un caso se encontraba curado e incorporado a su puesto de trabajo.

  2. Concept of radiological, medical and social protection of the population of Russia affected by accidental exposure

    International Nuclear Information System (INIS)

    Osechinski, I.V.; Ivanov, E.V.; Ramzaev, P.V.; Balonov, M.I.; Tsyb, A.F.

    1997-01-01

    Main principles of population radiation protection from various accidental exposure, including the Chernobyl accident, have been implemented in officially approved Concept ''On radiological, medical, social protection and rehabilitation of the Russian Federation population affected by accidental radiation exposure''. The concept includes basic principles of radiation protection, designation of regional radionuclide contaminated territories, records and registers of exposed persons, health protection and rehabilitation, socio-economic and legal aspects

  3. Accidental degeneracy in photonic bands and topological phase transitions in two-dimensional core-shell dielectric photonic crystals.

    Science.gov (United States)

    Xu, Lin; Wang, Hai-Xiao; Xu, Ya-Dong; Chen, Huan-Yang; Jiang, Jian-Hua

    2016-08-08

    A simple core-shell two-dimensional photonic crystal is studied where the triangular lattice symmetry and the C6 point group symmetry give rich physics in accidental touching points of photonic bands. We systematically evaluate different types of accidental nodal points at the Brillouin zone center for transverse-magnetic harmonic modes when the geometry and permittivity of the core-shell material are continuously tuned. The accidental nodal points can have different dispersions and topological properties (i.e., Berry phases). These accidental nodal points can be the critical states lying between a topological phase and a normal phase of the photonic crystal. They are thus very important for the study of topological photonic states. We show that, without breaking time-reversal symmetry, by tuning the geometry of the core-shell material, a phase transition into the photonic quantum spin Hall insulator can be achieved. Here the "spin" is defined as the orbital angular momentum of a photon. We study the topological phase transition as well as the properties of the edge and bulk states and their application potentials in optics.

  4. Total Site Heat Integration Considering Pressure Drops

    Directory of Open Access Journals (Sweden)

    Kew Hong Chew

    2015-02-01

    Full Text Available Pressure drop is an important consideration in Total Site Heat Integration (TSHI. This is due to the typically large distances between the different plants and the flow across plant elevations and equipment, including heat exchangers. Failure to consider pressure drop during utility targeting and heat exchanger network (HEN synthesis may, at best, lead to optimistic energy targets, and at worst, an inoperable system if the pumps or compressors cannot overcome the actual pressure drop. Most studies have addressed the pressure drop factor in terms of pumping cost, forbidden matches or allowable pressure drop constraints in the optimisation of HEN. This study looks at the implication of pressure drop in the context of a Total Site. The graphical Pinch-based TSHI methodology is extended to consider the pressure drop factor during the minimum energy requirement (MER targeting stage. The improved methodology provides a more realistic estimation of the MER targets and valuable insights for the implementation of the TSHI design. In the case study, when pressure drop in the steam distribution networks is considered, the heating and cooling duties increase by 14.5% and 4.5%.

  5. Drop size measurements in Venturi scrubbers

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez Alonso, D.; Azzopardi, B.J. [Nottingham Univ. (United Kingdom). Dept. of Chemical Engineering; Goncalves, J.A.S.; Coury, J.R. [Universidade Federal de Sao Carlos (Brazil). Departamento de Engenharia Quimica

    2001-07-01

    Venturi scrubbers are high efficiency gas cleaners in which suspended particles are removed from gas streams by drops formed by liquid atomisation, usually in the Venturi throat. The size of the drops formed are of fundamental importance to the performance of the equipment, both in terms of pressure drop and dust removal efficiency. In this study, drop sizes in a cylindrical laboratory-scale Venturi scrubber were measured using a laser diffraction technique. Gas velocity and liquid to gas ratios varied from 50 to 90 m/s and 0.5 to 2.0 1/m{sup 3}, respectively. Water was injected using two different arrangements: either as jets in the throat or as a film just upstream of the convergence. Drop size measurements were performed at three positions in the case of jet injection: two located along the throat, and the last one at the end of the diffuser. The present data shows that the Sauter mean diameter of the spray can be well correlated by the equation of Boll et al. (J. Air Pollut. Control Assoc. 24 (1974) 932). Drop size distributions are satisfactorily represented by a Rosin-Rammler function. This paper also provides a simple method for calculating the parameters of the Rosin-Rammler function. As a result of this work, drop sizes in Venturi scrubbers can be estimated with much higher accuracy. (Author)

  6. Cuidado popular de familias con un adulto mayor sobreviviente del primer accidente cerebrovascular

    Directory of Open Access Journals (Sweden)

    Lucero López-Díaz

    2016-01-01

    Full Text Available Introducción: el accidente cerebrovascular afecta a numerosas personas en el mundo y se constituye en la principal causa de muer- te. Los sobrevivientes pueden padecer discapacidad y sufrir modificaciones en las actividades cotidianas. La familia es el principal apoyo del sobreviviente y al ser parte de una misma cultura, construye acciones de cuidado en búsqueda del bienestar. Objetivo: describir las acciones del cuidado popular de las familias con un adulto mayor sobreviviente del primer accidente cerebrovascular. Método: estudio etnográfico, con observación participante y entrevistas en profundidad. Participaron siete familias bogotanas (siete adultos mayores entre los dos y diez meses posteriores al primer accidente cerebrovascular y los siete cuidadores principales respectivos. Resultados: cuidadores y adulto mayor comparten acciones de cuidado para la recuperación, relacionadas con la alimentación, el cuidado personal y la ingesta de medicamentos permeadas por la creencia religiosa, fuente de soporte y vínculo afectivo. Conclusión: conocer el cuidado popular de esta población posibilita proponer acciones culturalmente congruentes con sus valores y creencias para potencializar las ca- pacidades familiares e intermediar en los procesos de tratamiento.

  7. Factors perceived as being related to accidental falls by persons with multiple sclerosis.

    Science.gov (United States)

    Nilsagård, Ylva; Denison, Eva; Gunnarsson, Lars-Gunnar; Boström, Katrin

    2009-01-01

    This study explores and describes factors that persons with multiple sclerosis (MS) perceive as being related to accidental falls. A qualitative content analysis with primarily deductive approach was conducted using the International Classification of Functioning, Disability and Health. Twelve persons with MS, and identified as fallers, were interviewed. Factors perceived to cause accidental falls that had not previously been targeted in MS populations in relation to falls were identified as divided attention, reduced muscular endurance, fatigue and heat sensitivity. Previously reported risk factors such as changed gait pattern, limited walking ability, impaired proprioception, vision and spasticity were supported. Activities involving walking, recreation and leisure, maintaining and changing body position, lifting or carrying, taking care of the home, washing the body, moving around, preparing meals and housekeeping were limited and considered to be risk activities. Supportive persons and assistive device reduced falls, and unsuitable physical environments and climate conditions induced falls. Several preventative strategies were described as partially compensating for the impairments, limitations and restrictions. Investigating accidental falls using the perspective of the patient gave important information about variables not earlier targeted in MS research.

  8. Corrections for the effects of accidental coincidences, Compton scatter, and object size in positron emission mammography (PEM) imaging

    Science.gov (United States)

    Raylman, R. R.; Majewski, S.; Wojcik, R.; Weisenberger, A. G.; Kross, B.; Popov, V.

    2001-06-01

    Positron emission mammography (PEM) has begun to show promise as an effective method for the detection of breast lesions. Due to its utilization of tumor-avid radiopharmaceuticals labeled with positron-emitting radionuclides, this technique may be especially useful in imaging of women with radiodense or fibrocystic breasts. While the use of these radiotracers affords PEM unique capabilities, it also introduces some limitations. Specifically, acceptance of accidental and Compton-scattered coincidence events can decrease lesion detectability. The authors studied the effect of accidental coincidence events on PEM images produced by the presence of /sup 18/F-Fluorodeoxyglucose in the organs of a subject using an anthropomorphic phantom. A delayed-coincidence technique was tested as a method for correcting PEM images for the occurrence of accidental events. Also, a Compton scatter correction algorithm designed specifically for PEM was developed and tested using a compressed breast phantom. Finally, the effect of object size on image counts and a correction for this effect were explored. The imager used in this study consisted of two PEM detector heads mounted 20 cm apart on a Lorad biopsy apparatus. The results demonstrated that a majority of the accidental coincidence events (/spl sim/80%) detected by this system were produced by radiotracer uptake in the adipose and muscle tissue of the torso. The presence of accidental coincidence events was shown to reduce lesion detectability. Much of this effect was eliminated by correction of the images utilizing estimates of accidental-coincidence contamination acquired with delayed coincidence circuitry built into the PEM system. The Compton scatter fraction for this system was /spl sim/14%. Utilization of a new scatter correction algorithm reduced the scatter fraction to /spl sim/1.5%. Finally, reduction of count recovery due to object size was measured and a correction to the data applied. Application of correction techniques

  9. \\title{MARS15 Simulation Studies in the CMS Detector of Some LHC Beam Accident Scenarios}

    CERN Document Server

    Bhat, Pushpalatha C; Striganov, S.I; Singh, Amandeep

    2009-01-01

    \\begin{abstract} The CMS tracker, made of silicon strips and pixels and silicon-based electronics, is vulnerable to effects of radiation exposure during the LHC operation. Of much concern is the potential for damage from a high instantaneous dose to the pixel detectors and electronics located only a few centimeters from the beam in the event of a fast accidental beam loss. One of the worst case scenarios for such a beam loss is an unintended firing of an abort kicker module, referred to as the kicker pre-fire. MARS15 simulation studies of radiation loads in CMS for the kicker pre-fire scenario are described in this paper. It is found that, in a kicker pre-fire accident, in a time span of about 100 ns, the innermost pixel layer may see a radiation dose of about 0.02 Gy \\-- equivalent to a fluence of $\\sim 6\\times 10^{7}$ MIPs/$cm^2$. No discernible damage to the pixel detectors or the electronics were seen at these levels of fluence in recent beam tests. We note that the dose is about 1000 times smaller t...

  10. Towards "DRONE-BORNE" Disaster Management: Future Application Scenarios

    Science.gov (United States)

    Tanzi, Tullio Joseph; Chandra, Madhu; Isnard, Jean; Camara, Daniel; Sebastien, Olivier; Harivelo, Fanilo

    2016-06-01

    Information plays a key role in crisis management and relief efforts for natural disaster scenarios. Given their flight properties, UAVs (Unmanned Aerial Vehicles) provide new and interesting perspectives on the data gathering for disaster management. A new generation of UAVs may help to improve situational awareness and information assessment. Among the advantages UAVs may bring to the disaster management field, we can highlight the gain in terms of time and human resources, as they can free rescue teams from time-consuming data collection tasks and assist research operations with more insightful and precise guidance thanks to advanced sensing capabilities. However, in order to be useful, UAVs need to overcome two main challenges. The first one is to achieve a sufficient autonomy level, both in terms of navigation and interpretation of the data sensed. The second major challenge relates to the reliability of the UAV, with respect to accidental (safety) or malicious (security) risks. This paper first discusses the potential of UAV in assisting in different humanitarian relief scenarios, as well as possible issues in such situations. Based on recent experiments, we discuss the inherent advantages of autonomous flight operations, both lone flights and formation flights. The question of autonomy is then addressed and a secure embedded architecture and its specific hardware capabilities is sketched out. We finally present a typical use case based on the new detection and observation abilities that UAVs can bring to rescue teams. Although this approach still has limits that have to be addressed, technically speaking as well as operationally speaking, it seems to be a very promising one to enhance disaster management efforts activities.

  11. Accidental Outcomes Guide Punishment in a “Trembling Hand” Game

    Science.gov (United States)

    Cushman, Fiery; Dreber, Anna; Wang, Ying; Costa, Jay

    2009-01-01

    How do people respond to others' accidental behaviors? Reward and punishment for an accident might depend on the actor's intentions, or instead on the unintended outcomes she brings about. Yet, existing paradigms in experimental economics do not include the possibility of accidental monetary allocations. We explore the balance of outcomes and intentions in a two-player economic game where monetary allocations are made with a “trembling hand”: that is, intentions and outcomes are sometimes mismatched. Player 1 allocates $10 between herself and Player 2 by rolling one of three dice. One die has a high probability of a selfish outcome, another has a high probability of a fair outcome, and the third has a high probability of a generous outcome. Based on Player 1's choice of die, Player 2 can infer her intentions. However, any of the three die can yield any of the three possible outcomes. Player 2 is given the opportunity to respond to Player 1's allocation by adding to or subtracting from Player 1's payoff. We find that Player 2's responses are influenced substantially by the accidental outcome of Player 1's roll of the die. Comparison to control conditions suggests that in contexts where the allocation is at least partially under the control of Player 1, Player 2 will punish Player 1 accountable for unintentional negative outcomes. In addition, Player 2's responses are influenced by Player 1's intention. However, Player 2 tends to modulate his responses substantially more for selfish intentions than for generous intentions. This novel economic game provides new insight into the psychological mechanisms underlying social preferences for fairness and retribution. PMID:19707578

  12. Sepsis from dropped clips at laparoscopic cholecystectomy

    International Nuclear Information System (INIS)

    Hussain, Sarwat

    2001-01-01

    We report seven patients in whom five dropped surgical clips and two gallstones were visualized in the peritoneal cavity, on radiological studies. In two, subphrenic abscesses and empyemas developed as a result of dropped clips into the peritoneal cavity during or following laparoscopic cholecystectomy. In one of these two, a clip was removed surgically from the site of an abscess. In two other patients dropped gallstones, and in three, dropped clips led to no complications. These were seen incidentally on studies done for other indications. Abdominal abscess secondary to dropped gallstones is a well-recognized complication of laparoscopic cholecystectomy (LC). We conclude that even though dropped surgical clips usually do not cause problems, they should be considered as a risk additional to other well-known causes of post-LC abdominal sepsis

  13. Accidental exposure with X-ray diffraction equipment

    International Nuclear Information System (INIS)

    Montanez, O.; Blanco, D.

    1991-01-01

    The shutter on one of the windows of an X-ray diffraction apparatus was accidentally left open, exposing the worker to the radiation. The worker was wearing a dosimeter film, which was processed immediately to evaluate the potential risk. It was determined that the exposure rate was 350 Roentgen/minute on the skin surface, with corrections being made for the worker's thin clothing. It was concluded that in spite of the worker receiving a relative high dose, it did not reach the threshold value for producing deterministic effects such as cataracts, erythema, and skin damage

  14. Parental cannabis abuse and accidental intoxications in children: prevention by detecting neglectful situations and at-risk families.

    Science.gov (United States)

    Pélissier, Fanny; Claudet, Isabelle; Pélissier-Alicot, Anne-Laure; Franchitto, Nicolas

    2014-12-01

    Cannabis intoxication in toddlers is rare and mostly accidental. Our objectives were to focus on the characteristics and management of children under the age of 6 years who were admitted to our emergency department with cannabis poisoning reported as accidental by parents, and to point out the need to consider accidental cannabis ingestions as an indicator of neglect. The medical records of children hospitalized for cannabis poisoning in a pediatric emergency department from January 2007 to November 2012 were retrospectively evaluated. Data collected included age, sex, drug ingested, source of drug, intentional versus accidental ingestion, pediatric intensive care unit or hospital admission, treatment and length of hospital stay, toxicology results, and rate of child protectives services referral. Twelve toddlers (4 boys and 8 girls; mean age, 16.6 months) were included. All had ingested cannabis. Their parents reported the ingestion. Seven children experienced drowsiness or hypotonia. Three children were given activated charcoal. Blood screening for cannabinoids, performed in 2 cases, was negative in both, and urine samples were positive in 7 children (70%). All children had favorable outcomes after being hospitalized from 2 to 48 hours. Nine children were referred to social services for further assessment before discharge. Cannabis intoxication in children should be reported to child protection services with the aim of prevention, to detect situations of neglect and at-risk families. Legal action against the parents may be considered. Accidental intoxication and caring parents should be no exception to this rule.

  15. Micro-splashing by drop impacts

    KAUST Repository

    Thoroddsen, Sigurdur T; Takehara, Kohsei; Etoh, Takeharugoji

    2012-01-01

    We use ultra-high-speed video imaging to observe directly the earliest onset of prompt splashing when a drop impacts onto a smooth solid surface. We capture the start of the ejecta sheet travelling along the solid substrate and show how it breaks up immediately upon emergence from the underneath the drop. The resulting micro-droplets are much smaller and faster than previously reported and may have gone unobserved owing to their very small size and rapid ejection velocities, which approach 100 m s-1, for typical impact conditions of large rain drops. We propose a phenomenological mechanism which predicts the velocity and size distribution of the resulting microdroplets. We also observe azimuthal undulations which may help promote the earliest breakup of the ejecta. This instability occurs in the cusp in the free surface where the drop surface meets the radially ejected liquid sheet. © 2012 Cambridge University Press.

  16. Micro-splashing by drop impacts

    KAUST Repository

    Thoroddsen, Sigurdur T.

    2012-07-18

    We use ultra-high-speed video imaging to observe directly the earliest onset of prompt splashing when a drop impacts onto a smooth solid surface. We capture the start of the ejecta sheet travelling along the solid substrate and show how it breaks up immediately upon emergence from the underneath the drop. The resulting micro-droplets are much smaller and faster than previously reported and may have gone unobserved owing to their very small size and rapid ejection velocities, which approach 100 m s-1, for typical impact conditions of large rain drops. We propose a phenomenological mechanism which predicts the velocity and size distribution of the resulting microdroplets. We also observe azimuthal undulations which may help promote the earliest breakup of the ejecta. This instability occurs in the cusp in the free surface where the drop surface meets the radially ejected liquid sheet. © 2012 Cambridge University Press.

  17. Pressure drop in ET-RR-1

    International Nuclear Information System (INIS)

    Khattab, M.; Mina, A.R.

    1990-01-01

    Measurements of pressure drop through a bundle comprising 16 rods and their lower arrangement grid as well as orifices similar to those of ET-RR-1 core have been done. Experiments are carried out under adiabatic turbulent flow conditions at about 35 degree C. Bundle Reynolds number range is 4 x 10 -2 x 10. Orifices of diameters 4.5, 3.25 or 2.5 cm. are mounted underneath the bundle. The bundle and lower grid pressure drop coefficients are 3.75 and 1.8 respectively. Orifices pressure drop coefficients are 2.65, 19.67 and 53.55 respectively. The ratio of bundle pressure drop to that of 4.5 cm. Orifice diameter is 1.415. The pressure drop coefficients are utilizer to calculate flow through bundles. The flow rate per bundle is 39.1, 20.4 or 13.1 m 3 /hr. Depending on orifice diameter

  18. Accidental administration of Syntometrine in adult dosage to the newborn.

    OpenAIRE

    Whitfield, M F; Salfield, S A

    1980-01-01

    The clinical course is described of an infant who accidentally received an adult dose of Syntometrine (synthetic oxytocin + ergometrine) at delivery. The infant soon became ill with convulsions and ventilatory failure, and later with water intoxication. Similar reported cases are reviewed and recommendations are given for the management of future cases.

  19. Drop trampoline

    Science.gov (United States)

    Chantelot, Pierre; Coux, Martin; Clanet, Christophe; Quere, David

    2017-11-01

    Superhydrophobic substrates inspired from the lotus leaf have the ability to reflect impacting water drops. They do so very efficiently and contact lasts typically 10 ms for millimetric droplets. Yet unlike a lotus leaf most synthetic substrates are rigid. Focusing on the interplay between substrate flexibility and liquid repellency might allow us to understand the dynamic properties of natural surfaces. We perform liquid marbles impacts at velocity V onto thin ( 0.01 mm) stretched circular PDMS membranes. We obtain contact time reductions of up to 70%. The bouncing mechanism is drastically modified compared to that on a rigid substrate: the marble leaves the substrate while it is still spread in a disk shape as it is kicked upwards by the membrane. We show that the bouncing is controlled by an interplay between the dynamics of the drop and the membrane.

  20. Drop Spreading with Random Viscosity

    Science.gov (United States)

    Xu, Feng; Jensen, Oliver

    2016-11-01

    Airway mucus acts as a barrier to protect the lung. However as a biological material, its physical properties are known imperfectly and can be spatially heterogeneous. In this study we assess the impact of these uncertainties on the rate of spreading of a drop (representing an inhaled aerosol) over a mucus film. We model the film as Newtonian, having a viscosity that depends linearly on the concentration of a passive solute (a crude proxy for mucin proteins). Given an initial random solute (and hence viscosity) distribution, described as a Gaussian random field with a given correlation structure, we seek to quantify the uncertainties in outcomes as the drop spreads. Using lubrication theory, we describe the spreading of the drop in terms of a system of coupled nonlinear PDEs governing the evolution of film height and the vertically-averaged solute concentration. We perform Monte Carlo simulations to predict the variability in the drop centre location and width (1D) or area (2D). We show how simulation results are well described (at much lower computational cost) by a low-order model using a weak disorder expansion. Our results show for example how variability in the drop location is a non-monotonic function of the solute correlation length increases. Engineering and Physical Sciences Research Council.

  1. Thermocapillary reorientation of Janus drops

    Science.gov (United States)

    Rosales, Rodolfo; Saenz, Pedro

    2017-11-01

    Janus drops, named after the Ancient Roman two-faced god, are liquid drops formed from two immiscible fluids. Experimental observations indicate that a Janus drop may re-orientate in response to an applied external thermal gradient due to the Marangoni effect. Depending on the angle between the interior interface and the direction of the temperature gradient, disparities in the physical properties of the constituent liquids may lead to asymmetries in the thermocapillary flow. As a result, the drop will move along a curved path until a torque-free configuration is achieved, point after which it will continue on a straight trajectory. Here, we present the results of a theoretical investigation of this realignment phenomenon in the Stokes regime and in the limit of non-deformable interfaces. A 3D semi-analytical method in terms of polar spherical harmonics is developed to characterize and rationalize the hydrodynamic response (forces and torques), flow (velocity and temperature distribution) and trajectory of a Janus drop moving during the temperature-driven reorientation process. Furthermore, we discuss how this phenomenon may be exploited to develop dynamically reconfigurable micro-lenses. This work was partially supported by the US National Science Foundation through Grants DMS-1614043 and DMS-1719637.

  2. Accidental Coverage of Both Renal Arteries during Infrarenal Aortic Stent-Graft Implantation: Cause and Treatment

    Directory of Open Access Journals (Sweden)

    Umberto Marcello Bracale

    2014-01-01

    Full Text Available The purpose of this paper is to report a salvage maneuver for accidental coverage of both renal arteries during endovascular aneurysm repair (EVAR of an infrarenal abdominal aortic aneurysm (AAA. A 72-year-old female with a 6 cm infrarenal abdominal aortic aneurysm was treated by endovascular means with a standard bifurcated graft. Upon completing an angiogram, both renal arteries were found to be accidentally occluded. Through a left percutaneous brachial approach, the right renal artery was catheterized and a chimney stent was deployed; however this was not possible for the left renal artery. A retroperitoneal surgical approach was therefore carried out with a retrograde chimney stent implanted to restore blood flow. After three months, both renal arteries were patent and renal function was not different from the baseline. Both endovascular with percutaneous access via the brachial artery and open retroperitoneal approaches with retrograde catheterization are feasible rescue techniques to recanalize the accidentally occluded renal arteries during EVAR.

  3. CPAS Preflight Drop Test Analysis Process

    Science.gov (United States)

    Englert, Megan E.; Bledsoe, Kristin J.; Romero, Leah M.

    2015-01-01

    Throughout the Capsule Parachute Assembly System (CPAS) drop test program, the CPAS Analysis Team has developed a simulation and analysis process to support drop test planning and execution. This process includes multiple phases focused on developing test simulations and communicating results to all groups involved in the drop test. CPAS Engineering Development Unit (EDU) series drop test planning begins with the development of a basic operational concept for each test. Trajectory simulation tools include the Flight Analysis and Simulation Tool (FAST) for single bodies, and the Automatic Dynamic Analysis of Mechanical Systems (ADAMS) simulation for the mated vehicle. Results are communicated to the team at the Test Configuration Review (TCR) and Test Readiness Review (TRR), as well as at Analysis Integrated Product Team (IPT) meetings in earlier and intermediate phases of the pre-test planning. The ability to plan and communicate efficiently with rapidly changing objectives and tight schedule constraints is a necessity for safe and successful drop tests.

  4. Blood drop patterns: Formation and applications.

    Science.gov (United States)

    Chen, Ruoyang; Zhang, Liyuan; Zang, Duyang; Shen, Wei

    2016-05-01

    The drying of a drop of blood or plasma on a solid substrate leads to the formation of interesting and complex patterns. Inter- and intra-cellular and macromolecular interactions in the drying plasma or blood drop are responsible for the final morphologies of the dried patterns. Changes in these cellular and macromolecular components in blood caused by diseases have been suspected to cause changes in the dried drop patterns of plasma and whole blood, which could be used as simple diagnostic tools to identify the health of humans and livestock. However, complex physicochemical driving forces involved in the pattern formation are not fully understood. This review focuses on the scientific development in microscopic observations and pattern interpretation of dried plasma and whole blood samples, as well as the diagnostic applications of pattern analysis. Dried drop patterns of plasma consist of intricate visible cracks in the outer region and fine structures in the central region, which are mainly influenced by the presence and concentration of inorganic salts and proteins during drying. The shrinkage of macromolecular gel and its adhesion to the substrate surface have been thought to be responsible for the formation of the cracks. Dried drop patterns of whole blood have three characteristic zones; their formation as functions of drying time has been reported in the literature. Some research works have applied engineering treatment to the evaporation process of whole blood samples. The sensitivities of the resultant patterns to the relative humidity of the environment, the wettability of the substrates, and the size of the drop have been reported. These research works shed light on the mechanisms of spreading, evaporation, gelation, and crack formation of the blood drops on solid substrates, as well as on the potential applications of dried drop patterns of plasma and whole blood in diagnosis. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.

  5. Monitoring Volcanoes by Use of Air-Dropped Sensor Packages

    Science.gov (United States)

    Kedar, Sharon; Rivellini, Tommaso; Webb, Frank; Blaes, Brent; Bracho, Caroline; Lockhart, Andrew; McGee, Ken

    2003-01-01

    Sensor packages that would be dropped from airplanes have been proposed for pre-eruption monitoring of physical conditions on the flanks of awakening volcanoes. The purpose of such monitoring is to gather data that could contribute to understanding and prediction of the evolution of volcanic systems. Each sensor package, denoted a volcano monitoring system (VMS), would include a housing with a parachute attached at its upper end and a crushable foam impact absorber at its lower end (see figure). The housing would contain survivable low-power instrumentation that would include a Global Positioning System (GPS) receiver, an inclinometer, a seismometer, a barometer, a thermometer, and CO2 and SO2 analyzers. The housing would also contain battery power, control, data-logging, and telecommunication subsystems. The proposal for the development of the VMS calls for the use of commercially available sensor, power, and telecommunication equipment, so that efforts could be focused on integrating all of the equipment into a system that could survive impact and operate thereafter for 30 days, transmitting data on the pre-eruptive state of a target volcano to a monitoring center. In a typical scenario, VMSs would be dropped at strategically chosen locations on the flanks of a volcano once the volcano had been identified as posing a hazard from any of a variety of observations that could include eyewitness reports, scientific observations from positions on the ground, synthetic-aperture-radar scans from aircraft, and/or remote sensing from aboard spacecraft. Once dropped, the VMSs would be operated as a network of in situ sensors that would transmit data to a local monitoring center. This network would provide observations as part of an integrated volcano-hazard assessment strategy that would involve both remote sensing and timely observations from the in situ sensors. A similar strategy that involves the use of portable sensors (but not dropping of sensors from aircraft) is

  6. Main considerations for modelling a station blackout scenario with trace

    International Nuclear Information System (INIS)

    Querol, Andrea; Turégano, Jara; Lorduy, María; Gallardo, Sergio; Verdú, Gumersindo

    2017-01-01

    In the nuclear safety field, the thermal hydraulic phenomena that take place during an accident in a nuclear power plant is of special importance. One of the most studied accidents is the Station BlackOut (SBO). The aim of the present work is the analysis of the PKL integral test facility nodalization using the thermal-hydraulic code TRACE5 to reproduce a SBO accidental scenario. The PKL facility reproduces the main components of the primary and secondary systems of its reference nuclear power plant (Philippsburg II). The results obtained with different nodalization have been compared: 3D vessel vs 1D vessel, Steam Generator (SG) modelling using PIPE or TEE components and pressurizer modelling with PIPE or PRIZER components. Both vessel nodalization (1D vessel and 3D vessel) reproduce the physical phenomena of the experiment. However, there are significant discrepancies between them. The appropriate modelling of the SG is also relevant in the results. Regarding the other nodalization (PIPE or TEE components for SG and PIPE or PRIZER components for pressurizer), do not produce relevant differences in the results. (author)

  7. Main considerations for modelling a station blackout scenario with trace

    Energy Technology Data Exchange (ETDEWEB)

    Querol, Andrea; Turégano, Jara; Lorduy, María; Gallardo, Sergio; Verdú, Gumersindo, E-mail: anquevi@upv.es, E-mail: jaturna@upv.es, E-mail: maloral@upv.es, E-mail: sergalbe@iqn.upv.es, E-mail: gverdu@iqn.upv.es [Instituto Universitario de Seguridad Industrial, Radiofísica y Medioambiental (ISIRYM), Universitat Politècnica de València (Spain)

    2017-07-01

    In the nuclear safety field, the thermal hydraulic phenomena that take place during an accident in a nuclear power plant is of special importance. One of the most studied accidents is the Station BlackOut (SBO). The aim of the present work is the analysis of the PKL integral test facility nodalization using the thermal-hydraulic code TRACE5 to reproduce a SBO accidental scenario. The PKL facility reproduces the main components of the primary and secondary systems of its reference nuclear power plant (Philippsburg II). The results obtained with different nodalization have been compared: 3D vessel vs 1D vessel, Steam Generator (SG) modelling using PIPE or TEE components and pressurizer modelling with PIPE or PRIZER components. Both vessel nodalization (1D vessel and 3D vessel) reproduce the physical phenomena of the experiment. However, there are significant discrepancies between them. The appropriate modelling of the SG is also relevant in the results. Regarding the other nodalization (PIPE or TEE components for SG and PIPE or PRIZER components for pressurizer), do not produce relevant differences in the results. (author)

  8. Clinical Profile of Acute Accidental Poisoning Among Children- A Retrospective Study

    Directory of Open Access Journals (Sweden)

    Tabassum Khatoon

    2017-12-01

    Full Text Available Acute toxicity is a frequent but avoidable cause of morbidity and mortality in children especially in developing countries, including India. Present study assesses their pattern with relation to different age groupings. This retrospective study was conducted among all hospitalised paediatric victims of acute accidental poisoning at the King George Medical University; Lucknow during 2010 -11. Their history, baseline characteristics, clinical course and outcome was studied. Most children were male of less than three years with 4% overall mortality. Kerosene oil was implicated in most cases. Childhood poisoning is commonest during 1-3 years with a male preponderance. Household poisons; especially kerosene oil was responsible for most cases which was consumed accidentally. Parents must be educated and warned to keep these toxic ingredients safely in suitable containers and out of reach of their beloved children. Keywords: Forensic Science, Paediatric, Acute Poisoning, Kerosene, Outcome.

  9. [The accidental detection of apical periodontitis].

    Science.gov (United States)

    Wesselink, P R

    2011-04-01

    Accidental detection of an asymptomatic apical periodontitis raises the question whether this lesion should be treated or not. Arguments favouring treatment are that the inflammation may cause pain in the future, may enlarge or may negatively affect the host's resistance. Reasons for not treating may be that treatment weakens the tooth, may cause iatrogenic damage and that treatment is expensive and burdensome for the patient and does not lead in all cases to complete healing. Scientific evidence supporting either choice, whether treating the lesion or not, is lacking. In making such decisions, therefore, personal judgments by the patient and the dentist concerning the impact on the quality of life of the patient play an important role.

  10. South Dakota accidental childhood deaths, 2000-2007: what can we do?

    Science.gov (United States)

    Svien, Lana R; Senne, Svien A; Rasmussen, Carl

    2010-05-01

    Unintentional injuries are the leading cause of death in children around the world and are an under-recognized public health problem in the United States. The purpose of this study was to highlight the nature of the problem in South Dakota and outline interventions that have been successful in reducing childhood injuries in other states. This quantitative retrospective study examined mortality files in South Dakota for children birth to 19 years of age who died between January 1, 2000 to December 28, 2007. Although the number of deaths declined considerably from 2006 to 2007, South Dakota had the second-highest rate in the nation of childhood unintentional injury deaths from all causes between 2000-2005. The majority of deaths occurred in males and were associated with transportation-related deaths. Suffocation was the leading cause of death for newborns to age 1 year. Childhood accidental death in South Dakota is clearly a critical public health problem. Intervention efforts to reduce deaths from unintentional injuries amongst children should be targeted as the leading causes of accidental death for specific age groups and American Indian youth. Physicians, health educators and policymakers must play a role in prevention targeting the high-risk groups in addition to advocating for policy changes to protect childhood safety. More stringent child restraint laws, graduated driving laws, smoking cessation programs for parents, creation of safer sleep environments and further investigation of why a high proportion of American Indian children die accidentally in South Dakota are all warranted.

  11. Accidental sequences associated with the containment of the pressurized water nuclear installation - INAP

    International Nuclear Information System (INIS)

    Natacci, Faustina Beatriz; Correa, Francisco

    2002-01-01

    The analysis of accidental sequences associated with the Containment is one of the most important tasks during the development of the Probabilistic Safety Assessment (PSA) of nuclear plants mainly because of its importance on the mitigation of consequences of severe postulated accident initiating events. This paper presents a first approach of the Containment analysis of the INAP identifying failures and events that can compromise its performance, and outlining accidental sequences and Containment end states. The initial plant damage states, which are the input for this study, are based on the event trees developed in the PSA level 1 for the INAP. It should be emphasized that since this PSA is still in a preliminary stage it is subjected to further completion. Consequently, the Containment analysis shall also be revised in order to incorporate, in an extension as complete as possible, all initial plant damage states, the corresponding event trees, and the related Containment end states. Finally, it can be concluded that the evaluation of the qualitative analysis presented herein allows a concise and broad knowledge of the qualitative analysis presented herein allows a concise and broad knowledge of the development of accidental sequences related to the Containment of the INAP. (author)

  12. Evaluation of exposure scenarios on intentional microbiological contamination in a drinking water distribution network.

    Science.gov (United States)

    Schijven, Jack; Forêt, Jean Marie; Chardon, Jurgen; Teunis, Peter; Bouwknegt, Martijn; Tangena, Ben

    2016-06-01

    Drinking water distribution networks are vulnerable to accidental or intentional contamination events. The objective of this study was to investigate the effects of seeding duration and concentration, exposure pathway (ingestion via drinking of water and tooth brushing and inhalation by taking a shower) and pathogen infectivity on exposure and infection risk in the case of an intentional pathogenic contamination in a drinking water distribution network. Seeding of a pathogen for 10 min and 120 min, and subsequent spreading through a drinking water distribution network were simulated. For exposure via drinking, actual data on drinking events and volumes were used. Ingestion of a small volume of water by tooth brushing twice a day by every person in the network was assumed. Inhalation of contaminated aerosol droplets took place when taking a shower. Infection risks were estimated for pathogens with low (r = 0.0001) and high (r = 0.1) infectivity. In the served population (48 000 persons) and within 24 h, about 1400 persons were exposed to the pathogen by ingestion of water in the 10-min seeding scenario and about 3400 persons in the 120-min scenario. The numbers of exposed persons via tooth brushing were about the same as via drinking of water. Showering caused (inhalation) exposure in about 450 persons in the 10-min scenario and about 1500 in the 120-min scenario. Regardless of pathogen infectivity, if the seeding concentration is 10(6) pathogens per litre or more, infection risks are close to one. Exposure by taking a shower is of relevance if the pathogen is highly infectious via inhalation. A longer duration of the seeding of a pathogen increases the probability of exposure. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Steering committee for the management of the post-accidental phase of a nuclear accident or of a radiological situation (CODIRPA). Work group nr 8 'Communication' - 2011 January 10. Synthesis of the report of the 'nuclear post-accidental communication' nr 8 work group

    International Nuclear Information System (INIS)

    Delmestre, Alain; Bouchot, Emmanuel; Mehl-Auget, Isabelle; Theron, Francois; Attiach, Alexandra; Leurette, Marc; Villeneuve, Marcel; Volant, Philippe; Bigot, Marie-Pierre; Demet, Michel; Lheureux, Yves; Herve, Christophe

    2011-01-01

    A first part of this report addresses the State communication in a nuclear post-accidental situation, and notably discusses and comments the necessity to communicate during the post-accidental phase, how communication should be organised, and which are the main objectives of the State communication during a post-accidental phase. The second part addresses the State operational communication in a nuclear post-accidental situation. It defines its addressees (population, institutional actors, associations and opinion relays), proposes recommendations for a prescriptive communication (conditions for efficiency, required conditions, lessons learned from the Chernobyl accident), and makes recommendations about the relationships with media. Some good practices of communication tools are also identified. The third part contains communication operational tools such as language elements and practical advices for the different stages and aspects of communication

  14. Hydrothermal waves in evaporating sessile drops

    OpenAIRE

    Brutin, D.; Rigollet, F.; Niliot, C. Le

    2009-01-01

    Drop evaporation is a simple phenomena but still unclear concerning the mechanisms of evaporation. A common agreement of the scientific community based on experimental and numerical work evidences that most of the evaporation occurs at the triple line. However, the rate of evaporation is still empirically predicted due to the lack of knowledge on the convection cells which develop inside the drop under evaporation. The evaporation of sessile drop is more complicated than it appears due to the...

  15. Self-Administered Ethanol Enema Causing Accidental Death

    Directory of Open Access Journals (Sweden)

    Thomas Peterson

    2014-01-01

    Full Text Available Excessive ethanol consumption is a leading preventable cause of death in the United States. Much of the harm from ethanol comes from those who engage in excessive or hazardous drinking. Rectal absorption of ethanol bypasses the first pass metabolic effect, allowing for a higher concentration of blood ethanol to occur for a given volume of solution and, consequently, greater potential for central nervous system depression. However, accidental death is extremely rare with rectal administration. This case report describes an individual with klismaphilia whose death resulted from acute ethanol intoxication by rectal absorption of a wine enema.

  16. Accidental Release of Chlorine from a Storage Facility and an On-Site Emergency Mock Drill: A Case Study

    Directory of Open Access Journals (Sweden)

    Ambalathumpara Raman Soman

    2015-01-01

    Full Text Available In the current industrial scenario there is a serious need for formulating strategies to handle hazardous substances in the safest way. Manufacture, storage, and use of hazardous substances pose a serious risk to industry, people, and the environment. Accidental release of toxic chemicals can lead to emergencies. An emergency response plan (ERP is inevitable to minimize the adverse effects of such releases. The on-site emergency plan is an integral component of any process safety and risk management system. This paper deals with an on-site emergency response plan for a chlorine manufacturing industry. It was developed on the basis of a previous study on chlorine release and a full scale mock drill has been conducted for testing the plan. Results indicated that properly trained personnel can effectively handle each level of incidents occurring in the process plant. As an extensive guideline to the district level government authorities for off-site emergency planning, risk zone has also been estimated with reference to a chlorine exposure threshold of 3 ppm.

  17. Coincidence counting corrections for dead time losses and accidental coincidences

    International Nuclear Information System (INIS)

    Wyllie, H.A.

    1987-04-01

    An equation is derived for the calculation of the radioactivity of a source from the results of coincidence counting taking into account the dead-time losses and accidental coincidences. The derivation is an extension of the method of J. Bryant [Int. J. Appl. Radiat. Isot., 14:143, 1963]. The improvement on Bryant's formula has been verified by experiment

  18. Parametric resonance in acoustically levitated water drops

    International Nuclear Information System (INIS)

    Shen, C.L.; Xie, W.J.; Wei, B.

    2010-01-01

    Liquid drops can be suspended in air with acoustic levitation method. When the sound pressure is periodically modulated, the levitated drop is usually forced into an axisymmetric oscillation. However, a transition from axisymmetric oscillation into sectorial oscillation occurs when the modulation frequency approaches some specific values. The frequency of the sectorial oscillation is almost exactly half of the modulation frequency. It is demonstrated that this transition is induced by the parametric resonance of levitated drop. The natural frequency of sectorial oscillation is found to decrease with the increase of drop distortion extent.

  19. Parametric resonance in acoustically levitated water drops

    Energy Technology Data Exchange (ETDEWEB)

    Shen, C.L.; Xie, W.J. [Department of Applied Physics, Northwestern Polytechnical University, Xi' an 710072 (China); Wei, B., E-mail: bbwei@nwpu.edu.c [Department of Applied Physics, Northwestern Polytechnical University, Xi' an 710072 (China)

    2010-05-10

    Liquid drops can be suspended in air with acoustic levitation method. When the sound pressure is periodically modulated, the levitated drop is usually forced into an axisymmetric oscillation. However, a transition from axisymmetric oscillation into sectorial oscillation occurs when the modulation frequency approaches some specific values. The frequency of the sectorial oscillation is almost exactly half of the modulation frequency. It is demonstrated that this transition is induced by the parametric resonance of levitated drop. The natural frequency of sectorial oscillation is found to decrease with the increase of drop distortion extent.

  20. Accidental ingestion of BiTine ring and a note on inefficient ring separation forceps

    Directory of Open Access Journals (Sweden)

    Baghele ON

    2011-05-01

    Full Text Available Om Nemichand Baghele1, Mangala Om Baghele21Department of Periodontology, SMBT Dental College and Hospital, Sangamner, Ahmednagar, Maharashtra, India; 2Private General Dental Practice, Mumbai, IndiaBackground: Accidental ingestion of medium-to-large instruments is relatively uncommon during dental treatment but can be potentially dangerous. A case of BiTine ring ingestion is presented with a note on inefficient ring separation forceps.Case description: A 28-year-old male patient accidentally ingested the BiTine ring (2 cm diameter, 0.5 cm outward projections while it was being applied to a distoproximal cavity in tooth # 19. The ring placement forceps were excessively flexible; bending of the beaks towards the ring combined with a poor no-slippage mechanism led to sudden disengagement of the ring and accelerated movement towards the pharynx. We followed the patient with bulk forming agents and radiographs. Fortunately the ring passed out without any complications.Clinical implications: Checking equipment and methods is as important as taking precautions against any preventable medical emergency. It is the responsibility of the clinician to check, verify and then use any instrument/equipment.Keywords: foreign bodies/radiography, foreign bodies/complications, equipment failure, dental instrument, accidental ingestion

  1. Accidental poisoning with Veratrum album mistaken for wild garlic (Allium ursinum).

    Science.gov (United States)

    Gilotta, Irene; Brvar, Miran

    2010-11-01

    Veratrum album (white or false hellebore) is a poisonous plant containing steroidal alkaloids that cause nausea, vomiting, headache, visual disturbances, paresthesia, dizziness, bradycardia, atrioventricular block, hypotension, and syncope. It is regularly mistaken for Gentiana lutea (yellow gentian). We report accidental poisoning with V. album mistaken for Allium ursinum (wild garlic), a wild plant used in soups and salads in Central Europe. Four adults (24-45 years) accidentally ingested V. album mistaken for A. ursinum in self-prepared salads and soups. Within 15-30 min of ingestion they developed nausea, vomiting, and abdominal pain. At the same time dizziness, tingling, dimmed and jumping vision, transient blindness, and confusion appeared. On arrival at the ED, all patients had sinus bradycardia and hypotension. Following treatment the patients were discharged well 24-48 h after ingestion. In patients presenting with gastrointestinal, neurological, and cardiovascular symptoms a history of wild plant ingestion suggests possible poisoning with V. album mistaken for wild garlic.

  2. Impacts of high energy prices on long-term energy-economic scenarios for Germany

    Energy Technology Data Exchange (ETDEWEB)

    Krey, V.; Markewitz, P. [Research Center Juelich, Inst. of Energy Res., Systems Analysis and Technology Evaluation, Juelich (Germany); Horn, M. [DIW Berlin, Berlin (Germany); Matthes, C.; Graichen, V.; Harthan, R.O.; Repenning, J. [Oeko-Institut, Berlin (Germany)

    2007-05-15

    Prices of oil and other fossil fuels on global markets have reached a high level in recent years. These levels were not able to be reproduced on the basis of scenarios and prognoses that were published in the past. New scenarios, based on higher energy price trajectories, have appeared only recently. The future role of various energy carriers and technologies in energy-economic scenarios will greatly depend on the level of energy prices. Therefore, an analysis of the impact of high energy prices on long-term scenarios for Germany was undertaken. Based on a reference scenario with moderate prices, a series of consistent high price scenarios for primary and secondary energy carriers were developed. Two scenarios with (i) continuously rising price trajectories and (ii) a price shock with a price peak during the period 2010-15 and a subsequent decline to the reference level are analysed. Two types of models have been applied in the analysis. The IKARUS energy systems optimisation model covers the whole of the German energy system from primary energy supply down to the end-use sectors. Key results in both high price scenarios include a replacement of natural gas by hard coal and renewable energy sources in electricity and heat generation. Backstop technologies like coal liquefaction begin to play a role under such conditions. Up to 10% of final energy consumption is saved in the end-use sectors, with the residential and transport sector being the greatest contributors. Even without additional restrictions, CO{sub 2} emissions significantly drop in comparison to the reference scenario. The ELIAS electricity investment analysis model focuses on the power sector. In the reference scenario with current allocation rules in the emissions trading scheme, the CO{sub 2} emissions decrease relatively steadily. The development is characterised by the phaseout of nuclear energy which is counterweighted by the increase of renewable. In the high price scenario, the CO{sub 2

  3. Biomass Scenario Model Scenario Library: Definitions, Construction, and Description

    Energy Technology Data Exchange (ETDEWEB)

    Inman, D.; Vimmerstedt, L.; Bush, B.; Peterson, S.

    2014-04-01

    Understanding the development of the biofuels industry in the United States is important to policymakers and industry. The Biomass Scenario Model (BSM) is a system dynamics model of the biomass-to-biofuels system that can be used to explore policy effects on biofuels development. Because of the complexity of the model, as well as the wide range of possible future conditions that affect biofuels industry development, we have not developed a single reference case but instead developed a set of specific scenarios that provide various contexts for our analyses. The purpose of this report is to describe the scenarios that comprise the BSM scenario library. At present, we have the following policy-focused scenarios in our library: minimal policies, ethanol-focused policies, equal access to policies, output-focused policies, technological diversity focused, and the point-of-production- focused. This report describes each scenario, its policy settings, and general insights gained through use of the scenarios in analytic studies.

  4. Deformed liquid marbles: Freezing drop oscillations with powders

    KAUST Repository

    Marston, Jeremy; Zhu, Y.; Vakarelski, Ivan Uriev; Thoroddsen, Sigurdur T

    2012-01-01

    In this work we show that when a liquid drop impacts onto a fine-grained hydrophobic powder, the final form of the drop can be very different from the spherical form with which it impacts. In all cases, the drop rebounds due to the hydrophobic nature of the powder. However, we find that above a critical impact speed, the drop undergoes a permanent deformation to a highly non-spherical shape with a near-complete coverage of powder, which then freezes the drop oscillations during rebound. © 2012 Elsevier B.V.

  5. Deformed liquid marbles: Freezing drop oscillations with powders

    KAUST Repository

    Marston, Jeremy

    2012-09-01

    In this work we show that when a liquid drop impacts onto a fine-grained hydrophobic powder, the final form of the drop can be very different from the spherical form with which it impacts. In all cases, the drop rebounds due to the hydrophobic nature of the powder. However, we find that above a critical impact speed, the drop undergoes a permanent deformation to a highly non-spherical shape with a near-complete coverage of powder, which then freezes the drop oscillations during rebound. © 2012 Elsevier B.V.

  6. Levitation of a drop over a film flow

    Science.gov (United States)

    Sreenivas, K. R.; de, P. K.; Arakeri, Jaywant H.

    1999-02-01

    A vertical jet of water impinging on a horizontal surface produces a radial film flow followed by a circular hydraulic jump. We report a phenomenon where fairly large (1 ml) drops of liquid levitate just upstream of the jump on a thin air layer between the drop and the film flow. We explain the phenomenon using lubrication theory. Bearing action both in the air film and the water film seems to be necessary to support large drops. Horizontal support is given to the drop by the hydraulic jump. A variety of drop shapes is observed depending on the volume of the drop and liquid properties. We show that interaction of the forces due to gravity, surface tension, viscosity and inertia produces these various shapes.

  7. Advanced and Exploratory Shock Sensing Mechanisms.

    Energy Technology Data Exchange (ETDEWEB)

    Nelsen, Nicholas H. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kolb, James D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kulkarni, Akshay G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sorscher, Zachary [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Habing, Clayton D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mathis, Allen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Beller, Zachary J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-09-01

    Mechanical component response to shock environments must be predictable in order to ensure reliability and safety. Whether the shock input results from accidental drops during transportation to projectile impact scenarios, the system must irreversibly transition into a safe state that is incapable of triggering the component . With this critical need in mind, the 2017 Nuclear Weapons Summer Product Realization Institute (NW SPRINT) program objective sought the design of a passive shock failsafe with emphasis on additively manufactured (AM) components. Team Advanced and Exploratory (A&E) responded to the challenge by designing and delivering multiple passive shock sensing mech anisms that activate within a prescribed mechanical shock threshold. These AM failsafe designs were tuned and validated using analytical and computational techniques including the shock response spectrum (SRS) and finite element analysis (FEA). After rapid prototyping, the devices experienced physical shock tests conducted on Sandia drop tables to experimentally verify performance. Keywords: Additive manufacturing, dynamic system, failsafe, finite element analysis, mechanical shock, NW SPRINT, shock respon se spectrum

  8. Assessment of evolutive and prognostic indicators applied to accidental overexposure to ionizing radiation

    International Nuclear Information System (INIS)

    Morera Carrillo, M. de Lourdes; Cardenas, J.; Dubner, D.; Perez, M. del Rosario; Gisone, P.

    2001-01-01

    The acute radiation syndrome has been characterized in different ways that involve risk for life and health of the people overexposed to ionizing radiations. This work intends to test a therapeutical total body irradiation (TBI) model as conditioning to bone marrow transplantation. With the purpose of evaluating the applicability of several biological indicators in accidental overexposures, a study was carried out in 46 patients undergoing TBI receiving doses between 10 Gy and 12 Gy. The following parameters were assessed: lipo peroxyde plasmatic levels (TBARS) and total plasma antioxidant activity, reticulocyte maturity index (RMI) and charges in lymphocyte subpopulations. These data suggest that TBARS could provide an useful evolutive indicator in accidental overexposed patients and RMI is an early indicator of bone marrow recovery after radioinduced aplasia

  9. Scenario planning.

    Science.gov (United States)

    Enzmann, Dieter R; Beauchamp, Norman J; Norbash, Alexander

    2011-03-01

    In facing future developments in health care, scenario planning offers a complementary approach to traditional strategic planning. Whereas traditional strategic planning typically consists of predicting the future at a single point on a chosen time horizon and mapping the preferred plans to address such a future, scenario planning creates stories about multiple likely potential futures on a given time horizon and maps the preferred plans to address the multiple described potential futures. Each scenario is purposefully different and specifically not a consensus worst-case, average, or best-case forecast; nor is scenario planning a process in probabilistic prediction. Scenario planning focuses on high-impact, uncertain driving forces that in the authors' example affect the field of radiology. Uncertainty is the key concept as these forces are mapped onto axes of uncertainty, the poles of which have opposed effects on radiology. One chosen axis was "market focus," with poles of centralized health care (government control) vs a decentralized private market. Another axis was "radiology's business model," with one pole being a unified, single specialty vs a splintered, disaggregated subspecialty. The third axis was "technology and science," with one pole representing technology enabling to radiology vs technology threatening to radiology. Selected poles of these axes were then combined to create 3 scenarios. One scenario, termed "entrepreneurialism," consisted of a decentralized private market, a disaggregated business model, and threatening technology and science. A second scenario, termed "socialized medicine," had a centralized market focus, a unified specialty business model, and enabling technology and science. A third scenario, termed "freefall," had a centralized market focus, a disaggregated business model, and threatening technology and science. These scenarios provide a range of futures that ultimately allow the identification of defined "signposts" that can

  10. Drop Test Results of CRDM under Seismic Loads

    International Nuclear Information System (INIS)

    Choi, Myoung-Hwan; Cho, Yeong-Garp; Kim, Gyeong-Ho; Sun, Jong-Oh; Huh, Hyung

    2016-01-01

    This paper describes the test results to demonstrate the drop performance of CRDM under seismic loads. The top-mounted CRDM driven by the stepping motor for Jordan Research and Training Reactor (JRTR) has been developed in KAERI. The CRDM for JRTR has been optimized by the design improvement based on that of the HANARO. It is necessary to verify the drop performance under seismic loads such as operating basis earthquake (OBE) and safe shutdown earthquake (SSE). Especially, the CAR drop times are important data for the safety analysis. confirm the drop performance under seismic loads. The delay of drop time at Rig no. 2 due to seismic loads is greater than that at Rig no. 3. The total pure drop times under seismic loads are estimated as 1.169 and 1.855, respectively

  11. Drop Test Results of CRDM under Seismic Loads

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Myoung-Hwan; Cho, Yeong-Garp; Kim, Gyeong-Ho; Sun, Jong-Oh; Huh, Hyung [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    This paper describes the test results to demonstrate the drop performance of CRDM under seismic loads. The top-mounted CRDM driven by the stepping motor for Jordan Research and Training Reactor (JRTR) has been developed in KAERI. The CRDM for JRTR has been optimized by the design improvement based on that of the HANARO. It is necessary to verify the drop performance under seismic loads such as operating basis earthquake (OBE) and safe shutdown earthquake (SSE). Especially, the CAR drop times are important data for the safety analysis. confirm the drop performance under seismic loads. The delay of drop time at Rig no. 2 due to seismic loads is greater than that at Rig no. 3. The total pure drop times under seismic loads are estimated as 1.169 and 1.855, respectively.

  12. Study of stowage of radioactive materials packagings in accidental conditions

    International Nuclear Information System (INIS)

    Chevalier, G.; Gilles, P.; Phalippou, C.; Pouard, M.; Draulans, J.; Lafontaine, I.

    1987-03-01

    The study of transport conditions shows that few data are available on accidental conditions. Two types of accidents are selected and defined by calculations and tests. Sizing of stowage is determined for a frontal shock (35 g deceleration), maintaining the packaging on the vehicle, and side shock rupture of the stowage system for a determined stress. Mathematical formulations are developed [fr

  13. Impact of granular drops

    KAUST Repository

    Marston, J. O.

    2013-07-15

    We investigate the spreading and splashing of granular drops during impact with a solid target. The granular drops are formed from roughly spherical balls of sand mixed with water, which is used as a binder to hold the ball together during free-fall. We measure the instantaneous spread diameter for different impact speeds and find that the normalized spread diameter d/D grows as (tV/D)1/2. The speeds of the grains ejected during the “splash” are measured and they rarely exceed twice that of the impact speed.

  14. Impact of granular drops

    KAUST Repository

    Marston, J. O.; Mansoor, Mohammad M.; Thoroddsen, Sigurdur T

    2013-01-01

    We investigate the spreading and splashing of granular drops during impact with a solid target. The granular drops are formed from roughly spherical balls of sand mixed with water, which is used as a binder to hold the ball together during free-fall. We measure the instantaneous spread diameter for different impact speeds and find that the normalized spread diameter d/D grows as (tV/D)1/2. The speeds of the grains ejected during the “splash” are measured and they rarely exceed twice that of the impact speed.

  15. Toxicologia y accidentes de trafico:un estudio a traves de los datos policiales y del samu de la ciudad de valencia

    OpenAIRE

    Homsi Faraye, Rouaide

    2014-01-01

    Las lesiones de los accidentes de tráfico y la siniestralidad vial, con sus crecientes cifras y su incidencia diferencial en grupos de edad y género constituyen para la OMS un problema de salud pública de grandes magnitudes en los países industriales, tanto en términos de mortalidad como en términos de secuelas y dependencia. Este crecimiento convertirá los accidentes de tráfico en la quinta causa mundial de muerte. Los politraumatismos secundarios a accidentes de tráfico, laborales o por otr...

  16. Quantum-Size Dependence of the Energy for Vacancy Formation in Charged Small Metal Clusters. Drop Model

    Science.gov (United States)

    Pogosov, V. V.; Reva, V. I.

    2018-04-01

    Self-consistent computations of the monovacancy formation energy are performed for Na N , Mg N , and Al N (12 < N ≤ 168) spherical clusters in the drop model for stable jelly. Scenarios of the Schottky vacancy formation and "bubble vacancy blowing" are considered. It is shown that the asymptotic behavior of the size dependences of the energy for the vacancy formation by these two mechanisms is different and the difference between the characteristics of a charged and neutral cluster is entirely determined by the difference between the ionization potentials of clusters and the energies of electron attachment to them.

  17. Management options in the food chain for accidental radionuclide deposition

    International Nuclear Information System (INIS)

    Rantavaara, A.

    2005-12-01

    Finland with four other countries participated in the European Union's network project FARMING in 2000 - 2004. The aim of the project was to invite participants from each country representing the food supply chain in a stakeholder group and advance with the groups the networking in building preparedness for accidental contamination of the food production systems. The task of the groups was to evaluate the practicability of management options suggested for reduction of radiation exposure through foodstuffs, and for disposal of waste generated in implementation of these options. The criteria for practicability were effectiveness in reduction of radiation exposure through foodstuffs, technical feasibility, capacity, costs for implementation, secondary costs for waste disposal, socio-economic impact, and acceptability concerning ecology and protection of environment and landscape. Practicable management options aimed at sustainable restoration of food production systems after accidental contamination. The Finnish stakeholder group represented farm production, processing industry, food marketing, catering, advisor organisations for households and agriculture, consumers, nature conservation, the media, experts on environmental impact and authorities responsible for production, safety and security of foodstuffs, food supply and feedstuffs. The group was expected to examine the effect of the Finnish, and, also more generally, northern production conditions on the practicability of the suggested management options. The stakeholder group members first familiarized themselves with intervention after accidental contamination of a large milk production area and thereafter with practicability of individual management options. The evaluation was based on the group members' complementary expertise that very well covered the chain 'from field to fork' whether the issue was related to legislation, production methods, logistics, environmental impacts, or the issues of consumers and

  18. Accidental hypothermia in Poland – estimation of prevalence, diagnostic methods and treatment.

    Science.gov (United States)

    Kosiński, Sylweriusz; Darocha, Tomasz; Gałązkowski, Robert; Drwiła, Rafał

    2015-02-06

    The incidence of hypothermia is difficult to evaluate, and the data concerning the morbidity and mortality rates do not seem to fully represent the problem. The aim of the study was to estimate the actual prevalence of accidental hypothermia in Poland, as well as the methods of diagnosis and management procedures used in emergency rooms (ERs). A specially designed questionnaire, consisting of 14 questions, was mailed to all the 223 emergency rooms (ER) in Poland. The questions concerned the incidence, methods of diagnosis and risk factors, as well as the rewarming methods used and available measurement instruments. The analysis involved data from 42 ERs providing emergency healthcare for the population of 5,305,000. The prevalence of accidental hypothermia may have been 5.05 cases per 100.000 residents per year. Among the 268 cases listed 25% were diagnosed with codes T68, T69 or X31, and in 75% hypothermia was neither included nor assigned a code in the final diagnosis. The most frequent cause of hypothermia was exposure to cold air alongside ethanol abuse (68%). Peripheral temperature was measured in 57%, core temperature measurement was taken in 29% of the patients. Peripheral temperature was measured most often at the axilla, while core temperature measurement was predominantly taken rectally. Mild hypothermia was diagnosed in 75.5% of the patients, moderate (32-28°C) in 16.5%, while severe hypothermia (less than 28°C) in 8% of the cases. Cardiopulmonary resuscitation was carried out in 7.5% of the patients. The treatment involved mainly warmed intravenous fluids (83.5%) and active external rewarming measures (70%). In no case was extracorporeal rewarming put to use. The actual incidence of accidental hypothermia in Polish emergency departments may exceed up to four times the official data. Core temperature is taken only in one third of the patients, the treatment of hypothermic patients is rarely conducted in intensive care wards and extracorporeal rewarming

  19. Biokinetics of radionuclides and treatment of accidental intakes

    International Nuclear Information System (INIS)

    Taylor, D.M.; Stradling, G.N.; Menetrier, F.

    2003-01-01

    This paper describes the objectives and reviews the progress of EULEP Working Party 5, convened under the auspices of the European Union's Fifth Framework Programme, to 'cluster' two EU-supported contracts, Biokinetics and Dosimetry of Internal Contamination (BIODOS (EU Contract FIS5-1999-00214)) and Radionuclide Biokinetics Database (EULEP) ( RBDATA-EULEP (Concerted Action Contract FIS5-1999-00218), and two non-EU funded projects, Biokinetics of Radionuclides in Human Volunteers (RNHV (non-EU Funded Project) and Treatment of Accidental Intakes of Radionuclides (TAIR (part-funded by EULEP)). (author)

  20. Accidentes de tránsito en carreteras e hipersomnia durante la conducción. ¿es frecuente en nuestro medio? la evidencia periodística

    Directory of Open Access Journals (Sweden)

    Jorge Rey De Castro Mujica

    2003-04-01

    Full Text Available Objetivo: Determinar la relación de hipersomnia y los accidentes de transito, según la información periodistica. Material y metodos: Se revisó sistemáticamente la información periodística relacionada a los accidentes de tránsito de las carreteras publicados en el diario "El Comercio" entre los años 1999-2000. Resultados: En ese periodo se escribieron 73 artículos que dieron cuenta de 112 accidentes. Cincuenta y tres 53 (48 % podrían haber estado relacionados a hipersomnia durante el manejo. De acuerdo a esta fuente todos los accidentes causaron un total de 385 muertos y 839 heridos y "la tasa de mortalidad y morbilidad" en los accidentes de ómnibus, probablemente relacionados a hipersomnia, fue 9.7 y 20.6 respectivamente. Conclusión: Con las limitaciones relacionadas a la fuente de información, estos datos sugieren que la hipersomnia durante el manejo causa accidentes de tránsito en nuestro medio cuya prevalencia desconocemos. Asimismo esta información sugiere que los accidentes estarían relacionados a una alta tasa de morbi-mortalidad. Es necesario ampliar la investigación en esta área. ( Rev Med Hered 2003; 14:69-73 .

  1. Guidelines on the medical therapy of persons accidentally overexposed to ionizing radiations. External contamination

    International Nuclear Information System (INIS)

    Perez, M.R.; Di Trano, J.L.; Gisone, P.

    1998-01-01

    The document represents a guide for the external decontamination of persons accidentally radio contaminated due to the use, production or transport of radioactive materials. The general conditions, from the medical point of view, to be kept in mind, in the event of accidental overexposures as decontamination treatment and the handling of samples are detailed throughout report. The external contamination without injury in skin or with wound its considered. The distribution of measures and responsibilities for the therapy of the irradiated patients with radioactive materials are enumerated. The preparations of decontaminate solutions are detailed in this work. Moreover, forms for the reception, physical evaluation of the patient and external contamination are presented. (author)

  2. Estimation of the environmental or radiological impact in the event of accidental release of radionuclides in a DCLL fusion reactor; Estimacion del impacto radiologico ambiental en caso de liberacion accidental de radionucleidos en un reactor de fusion DCLL

    Energy Technology Data Exchange (ETDEWEB)

    Palermo, I.; Gomez Ros, J. M.; Sanz, J.; Mota, F.

    2013-07-01

    Tritium production and activation in the LiPb products can pose a radiological risk in the event of accidental release in a fusion reactor. Within the research programme Consolider TECNO{sub F}US (CSD2008-079) fusion technology has developed a design for a reactor with regenerative wrap with dual refrigeration (DCLL). The purpose of this communication is to present estimates of the radiological impact derived from an accidental release of radionuclides from the circuit of LiPb provinients. (Author)

  3. Thyrotoxicosis Presenting as Unilateral Drop Foot.

    Science.gov (United States)

    Hara, Kenju; Miyata, Hajime; Motegi, Takahide; Shibano, Ken; Ishiguro, Hideaki

    2017-01-01

    Neuromuscular disorders associated with hyperthyroidism have several variations in their clinical phenotype, such as ophthalmopathy, periodic paralysis, and thyrotoxic myopathy. We herein report an unusual case of thyrotoxic myopathy presenting as unilateral drop foot. Histopathological examinations of the left tibialis anterior muscle showed marked variation in the fiber size, mild inflammatory cell infiltration, and necrotic and regenerated muscle fibers with predominantly type 1 fiber atrophy. Medical treatment with propylthiouracil resulted in complete improvement of the left drop foot. This case expands the phenotype of thyrotoxicosis and suggests that thyrotoxicosis be considered as a possible cause of unilateral drop foot.

  4. Accidental strangulation in children by the automatic closing of a car window.

    Science.gov (United States)

    Serena, Kailene; Piva, Jefferson Pedro; Andreolio, Cinara; Carvalho, Paulo Roberto Antonacci; Rocha, Tais Sica da

    2018-03-01

    Among the main causes of death in our country are car accidents, drowning and accidental burns. Strangulation is a potentially fatal injury and an important cause of homicide and suicide among adults and adolescents. In children, its occurrence is usually accidental. However, in recent years, several cases of accidental strangulation in children around the world have been reported. A 2-year-old male patient was strangled in a car window. The patient was admitted to the pediatric intensive care unit with a Glasgow Coma Scale score of 8 and presented with progressive worsening of respiratory dysfunction and torpor. The patient also presented acute respiratory distress syndrome, acute pulmonary edema and shock. He was managed with protective mechanical ventilation, vasoactive drugs and antibiotic therapy. He was discharged from the intensive care unit without neurological or pulmonary sequelae. After 12 days of hospitalization, he was discharged from the hospital, and his state was very good. The incidence of automobile window strangulation is rare but of high morbidity and mortality due to the resulting choking mechanism. Fortunately, newer cars have devices that stop the automatic closing of the windows if resistance is encountered. However, considering the severity of complications strangulated patients experience, the intensive neuro-ventilatory and hemodynamic management of the pathologies involved is important to reduce morbidity and mortality, as is the need to implement new campaigns for the education of parents and caregivers of children, aiming to avoid easily preventable accidents and to optimize safety mechanisms in cars with electric windows.

  5. Accidental strangulation in children by the automatic closing of a car window

    Science.gov (United States)

    Serena, Kailene; Piva, Jefferson Pedro; Andreolio, Cinara; Carvalho, Paulo Roberto Antonacci; da Rocha, Tais Sica

    2018-01-01

    Among the main causes of death in our country are car accidents, drowning and accidental burns. Strangulation is a potentially fatal injury and an important cause of homicide and suicide among adults and adolescents. In children, its occurrence is usually accidental. However, in recent years, several cases of accidental strangulation in children around the world have been reported. A 2-year-old male patient was strangled in a car window. The patient was admitted to the pediatric intensive care unit with a Glasgow Coma Scale score of 8 and presented with progressive worsening of respiratory dysfunction and torpor. The patient also presented acute respiratory distress syndrome, acute pulmonary edema and shock. He was managed with protective mechanical ventilation, vasoactive drugs and antibiotic therapy. He was discharged from the intensive care unit without neurological or pulmonary sequelae. After 12 days of hospitalization, he was discharged from the hospital, and his state was very good. The incidence of automobile window strangulation is rare but of high morbidity and mortality due to the resulting choking mechanism. Fortunately, newer cars have devices that stop the automatic closing of the windows if resistance is encountered. However, considering the severity of complications strangulated patients experience, the intensive neuro-ventilatory and hemodynamic management of the pathologies involved is important to reduce morbidity and mortality, as is the need to implement new campaigns for the education of parents and caregivers of children, aiming to avoid easily preventable accidents and to optimize safety mechanisms in cars with electric windows.

  6. Menace of childhood non-accidental traumatic brain injuries: A single unit report

    Directory of Open Access Journals (Sweden)

    Musa Ibrahim

    2015-01-01

    Full Text Available Background: Childhood traumatic brain injury (TBI has high rate of mortality and morbidity worldwide. There are dearths of reports from developing countries with large paediatric population on trauma; neurosurgery trauma of nonaccidental origin is not an exemption. This study analysed menace of non-accidental TBI in the paediatric population from our center. Materials and Methods: This is a single unit, retrospective study of the epidemiology of non-accidental TBI in children starting from September, 2008 to March, 2014. The management outcomes of the epidemiology of the non-accidental TBI were analysed. Results: Total of 109 children age range from 0 (intra-natal to 16 years with a mean of 5.8 ± 4.6 years (median, 5 years were enrolled into the study. 34 (31.2% were domestic violence, 26 (23.9% street assaults, 16 (14.7% were due to animal assaults and mishaps, 17 (15.6% fall from heights. Seven (6.4% cases of collapsed buildings were also seen during the period. Four (3.7% industrial accidents and two (1.8% were self-inflicted injuries. There were also three (2.8% cases of iatrogenic TBI out of which two infants (1.8% sustained TBI from cesarean section procedure while one patient (0.9% under general anaesthesia felt from the operation bed resulting to severe TBI. Conclusion: Child abuse, unprotected child labour, parental/care-givers negligence are the main cause of nonaccidental TBI. Human right activists and government agents should be incorporated in curtailing the menace.

  7. Bubble and Drop Nonlinear Dynamics (BDND)

    Science.gov (United States)

    Trinh, E. H.; Leal, L. Gary; Thomas, D. A.; Crouch, R. K.

    1998-01-01

    Free drops and bubbles are weakly nonlinear mechanical systems that are relatively simple to characterize experimentally in 1-G as well as in microgravity. The understanding of the details of their motion contributes to the fundamental study of nonlinear phenomena and to the measurement of the thermophysical properties of freely levitated melts. The goal of this Glovebox-based experimental investigation is the low-gravity assessment of the capabilities of a modular apparatus based on ultrasonic resonators and on the pseudo- extinction optical method. The required experimental task is the accurate measurements of the large-amplitude dynamics of free drops and bubbles in the absence of large biasing influences such as gravity and levitation fields. A single-axis levitator used for the positioning of drops in air, and an ultrasonic water-filled resonator for the trapping of air bubbles have been evaluated in low-gravity and in 1-G. The basic feasibility of drop positioning and shape oscillations measurements has been verified by using a laptop-interfaced automated data acquisition and the optical extinction technique. The major purpose of the investigation was to identify the salient technical issues associated with the development of a full-scale Microgravity experiment on single drop and bubble dynamics.

  8. A 'Puff' dispersion model for routine and accidental releases

    International Nuclear Information System (INIS)

    Grsic, Z.; Rajkovic, B.; Milutinovic, P.

    1999-01-01

    A Puff dispersion model for accidental or routine releases is presented. This model was used as a constitutive part of an automatic meteorological station.All measured quantities are continuously displayed on PC monitor in a digital and graphical form, they are averaging every 10 minutes and sending to the civil information center of Belgrade. In the paper simulation of a pollutant plume dispersion from The oil refinery 'Pancevo', on April 18 th 1999 is presented. (author)

  9. Spent Nuclear Fuel (SNF) Bounding Drop Support Calculations

    International Nuclear Information System (INIS)

    CHENAULT, D.M.

    1999-01-01

    This report evaluates different drop heights, concrete and other impact media to which the transport package and/or the MCO is dropped. A prediction method is derived for estimating the resultant impact factor for determining the bounding drop case for the SNF Project

  10. Wetting and evaporation of binary mixture drops.

    Science.gov (United States)

    Sefiane, Khellil; David, Samuel; Shanahan, Martin E R

    2008-09-11

    Experimental results on the wetting behavior of water, methanol, and binary mixture sessile drops on a smooth, polymer-coated substrate are reported. The wetting behavior of evaporating water/methanol drops was also studied in a water-saturated environment. Drop parameters (contact angle, shape, and volume) were monitored in time. The effects of the initial relative concentrations on subsequent evaporation and wetting dynamics were investigated. Physical mechanisms responsible for the various types of wetting behavior during different stages are proposed and discussed. Competition between evaporation and hydrodynamic flow are evoked. Using an environment saturated with water vapor allowed further exploration of the controlling mechanisms and underlying processes. Wetting stages attributed to differential evaporation of methanol were identified. Methanol, the more volatile component, evaporates predominantly in the initial stage. The data, however, suggest that a small proportion of methanol remained in the drop after the first stage of evaporation. This residual methanol within the drop seems to influence subsequent wetting behavior strongly.

  11. Current controversies in the interpretation of non-accidental head injury

    International Nuclear Information System (INIS)

    Jaspan, Tim

    The field of non-accidental injury (NAI) has been the subject of a number of theories and hypotheses of variable merit. Concerning injuries that occur within the intracranial compartment, much research has been undertaken to investigate the cause of SDH and parenchymal brain injury. Much, however, remains contentious, particularly regarding the medicolegal aspects of suspected child abuse. Issues that present the greatest challenges will be addressed. (orig.)

  12. Current controversies in the interpretation of non-accidental head injury

    Energy Technology Data Exchange (ETDEWEB)

    Jaspan, Tim [Imaging Centre, University Hospital, Nottingham (United Kingdom)

    2008-06-15

    The field of non-accidental injury (NAI) has been the subject of a number of theories and hypotheses of variable merit. Concerning injuries that occur within the intracranial compartment, much research has been undertaken to investigate the cause of SDH and parenchymal brain injury. Much, however, remains contentious, particularly regarding the medicolegal aspects of suspected child abuse. Issues that present the greatest challenges will be addressed. (orig.)

  13. Analizan partículas calientes del accidente nuclear de Palomares

    OpenAIRE

    León Dueñas, Sergio David

    2012-01-01

    Investigadores pertenecientes al Centro Nacional de Aceleradores, CNA, (Universidad de Sevilla-Junta de Andalucía-CSIC) en colaboración con la Organización Internacional de la Energía Atómica (IAEA), han llevado a cabo me didas de elementos transuránicos en partículas calientes procedentes de accidentes nucleares tales como el de Thule (Groenlandia) o Palomares (España).

  14. Is the tribimaximal mixing accidental?

    International Nuclear Information System (INIS)

    Abbas, Mohammed; Smirnov, A. Yu.

    2010-01-01

    The tribimaximal (TBM) mixing is not accidental if structures of the corresponding leptonic mass matrices follow immediately from certain (residual or broken) flavor symmetry. We develop a simple formalism which allows one to analyze effects of deviations of the lepton mixing from TBM on the structure of the neutrino mass matrix and on the underlying flavor symmetry. We show that possible deviations from the TBM mixing can lead to strong modifications of the mass matrix and strong violation of the TBM-mass relations. As a result, the mass matrix may have an 'anarchical' structure with random values of elements or it may have some symmetry that differs from the TBM symmetry. Interesting examples include matrices with texture zeros, matrices with certain 'flavor alignment' as well as hierarchical matrices with a two-component structure, where the dominant and subdominant contributions have different symmetries. This opens up new approaches to understanding the lepton mixing.

  15. Attributes Of Quality Scenarios/Scenario Sets Used In Software Requirements Elicitation

    National Research Council Canada - National Science Library

    Braun, Kimberly

    1997-01-01

    .... This thesis examines scenarios used in software requirements elicitation. Many different definitions, formats, and ideas exist on scenarios, but no thorough work has been done on what makes a good, quality scenario and scenario set...

  16. Drop-out from a psychodynamic group psychotherapy outpatient unit.

    Science.gov (United States)

    Jensen, Hans Henrik; Mortensen, Erik Lykke; Lotz, Martin

    2014-11-01

    BACKGROUND. Drop-out from psychotherapy is common and represents a considerable problem in clinical practice and research. Aim. To explore pre-treatment predictors of early and late drop-out from psychodynamic group therapy in a public outpatient unit for non-psychotic disorders in Denmark. Methods. Naturalistic design including 329 patients, the majority with mood, neurotic and personality disorders referred to 39-session group therapy. Predictors were socio-demographic and clinical variables, self-reported symptoms (Symptom Check List-90-Revised) and personality style (Millon Clinical Multiaxial Inventory-II). Drop-out was classified into early and late premature termination excluding patients who dropped out for external reasons. Results. Drop-out comprised 20.6% (68 patients) of the sample. Logistic regression revealed social functioning, vocational training, alcohol problems and antisocial behavior to be related to drop-out. However, early drop-outs had prominent agoraphobic symptoms, lower interpersonal sensitivity and compulsive personality features, and late drop-outs cognitive and somatic anxiety symptoms and antisocial personality features. Clinical and psychological variables accounted for the major part of variance in predictions of drop-out, which ranged from 15.6% to 19.5% (Nagelkerke Pseudo R-Square). Conclusion. Social functioning was consistently associated with drop-out, but personality characteristics and anxiety symptoms differentiated between early and late drop-out. Failure to discriminate between stages of premature termination may explain some of the inconsistencies in the drop-out literature. Clinical implications. Before selection of patients to time-limited psychodynamic groups, self-reported symptoms should be thoroughly considered. Patients with agoraphobic symptoms should be offered alternative treatment. Awareness of and motivation to work with interpersonal issues may be essential for compliance with group therapy.

  17. Reducing Variability in Stress Drop with Root-Mean Acceleration

    Science.gov (United States)

    Crempien, J.; Archuleta, R. J.

    2012-12-01

    Stress drop is a fundamental property of the earthquake source. For a given tectonic region stress drop is assumed to be constant allowing for the scaling of earthquake spectra. However, the variability of the stress drop, either for worldwide catalogs or regional catalogs, is quite large. The variability around the median value is on the order of 1.5 in log10 units. One question that continues to pervade the analysis of stress drop is whether this variability is an inherent characteristic of the Earth or is an artifact of the determination of stress drop via the use of the spectral analysis. It is simple to see that the stress drop determined by seismic moment times corner frequency cubed that errors in the corner frequency will strongly influence the variability in the stress drop. To avoid this strong dependence on corner frequency cubed, we have examined the determination of stress drop based on the approach proposed by Hanks (1979), namely using the root-mean-square acceleration. The stress drop determined using rms acceleration may be advantageous because the stress drop is only affected by the square root of the corner frequency. To test this approach we have determined stress drops for the 2000 Tottori earthquake and its aftershocks. We use both the classic method of fitting to a spectrum as well as using rms acceleration. For a preliminary analysis of eight aftershocks and the mainshock we find that the variability in stress drop is reduced by about a factor of two. This approach needs more careful analysis of more events, which will be shown at the meeting.

  18. Why Do Students Drop Advanced Mathematics?

    Science.gov (United States)

    Horn, Ilana

    2004-01-01

    Students, especially black, Latino and Native American youth and students of low socio-economic status drop out of advanced mathematics. Teachers must coordinate their expectations, their knowledge of students and their teaching practices in order to stop struggling students from dropping out of advanced math classes.

  19. Delayed frost growth on jumping-drop superhydrophobic surfaces.

    Science.gov (United States)

    Boreyko, Jonathan B; Collier, C Patrick

    2013-02-26

    Self-propelled jumping drops are continuously removed from a condensing superhydrophobic surface to enable a micrometric steady-state drop size. Here, we report that subcooled condensate on a chilled superhydrophobic surface are able to repeatedly jump off the surface before heterogeneous ice nucleation occurs. Frost still forms on the superhydrophobic surface due to ice nucleation at neighboring edge defects, which eventually spreads over the entire surface via an interdrop frost wave. The growth of this interdrop frost front is shown to be up to 3 times slower on the superhydrophobic surface compared to a control hydrophobic surface, due to the jumping-drop effect dynamically minimizing the average drop size and surface coverage of the condensate. A simple scaling model is developed to relate the success and speed of interdrop ice bridging to the drop size distribution. While other reports of condensation frosting on superhydrophobic surfaces have focused exclusively on liquid-solid ice nucleation for isolated drops, these findings reveal that the growth of frost is an interdrop phenomenon that is strongly coupled to the wettability and drop size distribution of the surface. A jumping-drop superhydrophobic condenser minimized frost formation relative to a conventional dropwise condenser in two respects: preventing heterogeneous ice nucleation by continuously removing subcooled condensate, and delaying frost growth by limiting the success of interdrop ice bridge formation.

  20. Hanging drop crystal growth apparatus and method

    Science.gov (United States)

    Carter, Daniel C. (Inventor); Smith, Robbie E. (Inventor)

    1989-01-01

    An apparatus (10) is constructed having a cylindrical enclosure (16) within which a disc-shaped wicking element (18) is positioned. A well or recess (22) is cut into an upper side (24) of this wicking element, and a glass cover plate or slip (28) having a protein drop disposed thereon is sealably positioned on the wicking element (18), with drop (12) being positioned over well or recess (22). A flow of control fluid is generated by a programmable gradient former (16), with this control fluid having a vapor pressure that is selectively variable. This flow of control fluid is coupled to the wicking element (18) where control fluid vapor diffusing from walls (26) of the recess (22) is exposed to the drop (12), forming a vapor pressure gradient between the drop (12) and the control fluid vapor. Initially, this gradient is adjusted to draw solvent from the drop (12) at a relatively high rate, and as the critical supersaturation point is approached (the point at which crystal nucleation occurs), the gradient is reduced to more slowly draw solvent from the drop (12). This allows discrete protein molecules more time to orient themselves into an ordered crystalline lattice, producing protein crystals which, when processed by X-ray crystallography, possess a high degree of resolution.

  1. Free drop impact analysis of shipping cask

    International Nuclear Information System (INIS)

    Pfeiffer, P.A.; Kennedy, J.M.

    1989-01-01

    The WHAMS-2D and WHAMS-3D codes were used to analyze the dynamic response of the RAS/TREAT shielded shipping cask subjected to transient leadings for the purpose of assessing potential damage to the various components that comprise the the cask. The paper describes how these codes can be used to provide and intermediate level of detail between full three-dimensional finite element calculations and hand calculations which are cost effective for design purposes. Three free drops were adressed: (1) a thirty foot axial drop on either end; (2) a thirty foot oblique angle drop with the cask having several different orientations from the vertical with impact on the cask corner; and (3) a thirty foot side drop with simultaneous impact on the lifting trunnion and the bottom end. Results are presented for two models of the side and oblique angle drops; one model includes only the mass of the lapped sleeves of depleted uranium (DU) while the other includes the mass and stiffness of the DU. The results of the end drop analyses are given for models with and without imperfections in the cask. Comparison of the analysis to hand calculations and simplified analyses are given. (orig.)

  2. Electrowetting-on-dielectrics for manipulation of oil drops and gas bubbles in aqueous-shell compound drops.

    Science.gov (United States)

    Li, Jiang; Wang, Yixuan; Chen, Haosheng; Wan, Jiandi

    2014-11-21

    We present the manipulation of oil, organic and gaseous chemicals by electrowetting-on-dielectric (EWOD) technology using aqueous-shell compound drops. We demonstrate that the transport and coalescence of viscous oil drops, the reaction of bromine with styrene in benzene solution, and the reaction of red blood cells with carbon monoxide bubbles can be accomplished using this method.

  3. Corrections for the effects of accidental coincidences, Compton scatter, and object size in positron emission mammography (PEM) imaging

    Energy Technology Data Exchange (ETDEWEB)

    Raymond Raylman; Stanislaw Majewski; Randolph Wojcik; Andrew Weisenberger; Brian Kross; Vladimir Popov

    2001-06-01

    Positron emission mammography (PEM) has begun to show promise as an effective method for the detection of breast lesions. Due to its utilization of tumor-avid radiopharmaceuticals labeled with positron-emitting radionuclides, this technique may be especially useful in imaging of women with radiodense or fibrocystic breasts. While the use of these radiotracers affords PEM unique capabilities, it also introduces some limitations. Specifically, acceptance of accidental and Compton-scattered coincidence events can decrease lesion detectability. The authors studied the effect of accidental coincidence events on PEM images produced by the presence of 18F-Fluorodeoxyglucose in the organs of a subject using an anthropomorphic phantom. A delayed-coincidence technique was tested as a method for correcting PEM images for the occurrence of accidental events. Also, a Compton scatter correction algorithm designed specifically for PEM was developed and tested using a compressed breast phantom.

  4. Corrections for the effects of accidental coincidences, Compton scatter, and object size in positron emission mammography (PEM) imaging

    International Nuclear Information System (INIS)

    Raymond Raylman; Stanislaw Majewski; Randolph Wojcik; Andrew Weisenberger; Brian Kross; Vladimir Popov

    2001-01-01

    Positron emission mammography (PEM) has begun to show promise as an effective method for the detection of breast lesions. Due to its utilization of tumor-avid radiopharmaceuticals labeled with positron-emitting radionuclides, this technique may be especially useful in imaging of women with radiodense or fibrocystic breasts. While the use of these radiotracers affords PEM unique capabilities, it also introduces some limitations. Specifically, acceptance of accidental and Compton-scattered coincidence events can decrease lesion detectability. The authors studied the effect of accidental coincidence events on PEM images produced by the presence of 18F-Fluorodeoxyglucose in the organs of a subject using an anthropomorphic phantom. A delayed-coincidence technique was tested as a method for correcting PEM images for the occurrence of accidental events. Also, a Compton scatter correction algorithm designed specifically for PEM was developed and tested using a compressed breast phantom

  5. Protective action guides for accidentally contaminated water and food. Proceedings of a workshop

    International Nuclear Information System (INIS)

    1989-09-01

    The Workshop on Protective Action Guides for Accidentally Contaminated Water and Food was designed for those who have experience in planning for and responding to ingestion exposure scenarios. The objective was to identify and discuss all of the issues, problems, relevant experiences, and research that should be considered in the development of Protective Action Guides (PAGs) for water and food. The workshop proved to be very helpful for those responsible for developing PAGs for the ingestion exposure pathways. This workshop addressed the roles and responsibilities for the development of PAGs. EPA has the responsibility for development of PAGs, except in the case of PAGs for food for which the responsibility is shared with FDA. EPA participated in the development of the recommendations on PAGs for food and animal feed that FDA published in 1982, which are under revision. In the absence of PAGs specifically for water, past practice has been for EPA to provide ad hoc guidance when needed. EPA will be developing guidance for drinking water during the next fiscal year and, therefore, one of the working groups at the workshop was devoted to considering issues related to PAGs for water. It has not yet been determined whether PAGs for drinking water should be separate or included with those for food. These issues were discussed at the workshop and the recommendations included in this proceedings document will be used as resource in the development of PAGs for the ingestion pathway

  6. Protective action guides for accidentally contaminated water and food. Proceedings of a workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-09-01

    The Workshop on Protective Action Guides for Accidentally Contaminated Water and Food was designed for those who have experience in planning for and responding to ingestion exposure scenarios. The objective was to identify and discuss all of the issues, problems, relevant experiences, and research that should be considered in the development of Protective Action Guides (PAGs) for water and food. The workshop proved to be very helpful for those responsible for developing PAGs for the ingestion exposure pathways. This workshop addressed the roles and responsibilities for the development of PAGs. EPA has the responsibility for development of PAGs, except in the case of PAGs for food for which the responsibility is shared with FDA. EPA participated in the development of the recommendations on PAGs for food and animal feed that FDA published in 1982, which are under revision. In the absence of PAGs specifically for water, past practice has been for EPA to provide ad hoc guidance when needed. EPA will be developing guidance for drinking water during the next fiscal year and, therefore, one of the working groups at the workshop was devoted to considering issues related to PAGs for water. It has not yet been determined whether PAGs for drinking water should be separate or included with those for food. These issues were discussed at the workshop and the recommendations included in this proceedings document will be used as resource in the development of PAGs for the ingestion pathway.

  7. Studying the field induced breakup of acoustically levitated drops

    Science.gov (United States)

    Warschat, C.; Riedel, J.

    2017-10-01

    Coulomb fission of charged droplets (The terms drop and droplet are often used synonymous. Throughout this manuscript, to avoid confusion, the terms drop and droplet will be used for liquid spheres with radii in the millimeter range and the micrometer range, respectively. In our experiments, the first correspond to the parent drop while the latter describes the ejected progeny droplets.) is a well-studied natural phenomenon. Controlled droplet fission is already successfully employed in several technological applications. Still, since the occurring surface rupture relies on the exact understanding and description of the liquid gas boundary, some details are still under debate. Most empirical systematic studies observe falling micrometer droplets passing through the electric field inside a plate capacitor. This approach, although easily applicable and reliable, limits the experimental degrees of freedom regarding the observable time and the maximum size of the drops and can only be performed in consecutive individual observations of different subsequent drops. Here we present a novel setup to study the field induced breakup of acoustically levitated drops. The design does not bear any restrictions towards the temporal window of observation, and allows handling of drops of a tunable radius ranging from 10 μm to several millimeters and a real-time monitoring of one single drop. Our comprehensive study includes a time resolved visual inspection, laser shadowgraphy, laser induced fluorescence imaging, and ambient mass spectrometric interrogation of the nascent Taylor cone. The results shown for a millimeter sized drop, previously inaccessible for Coulomb fission experiments, are mostly comparable with previous results for smaller drops. The major difference is the time scale and the threshold potential of the drop rupture. Both values, however, resemble theoretically extrapolations to the larger radius. The technique allows for a systematic study of breakup behavior of

  8. Motion of a drop driven by substrate vibrations

    Science.gov (United States)

    Brunet, P.; Eggers, J.; Deegan, R. D.

    2009-01-01

    We report an experimental study of liquid drops moving against gravity, when placed on a vertically vibrating inclined plate, which is partially wet by the drop. Frequency of vibrations ranges from 30 to 200 Hz, and above a threshold in vibration acceleration, drops experience an upward motion. We attribute this surprising motion to the deformations of the drop, as a consequence of an up/down symmetry-breaking induced by the presence of the substrate. We relate the direction of motion to contact angle measurements.

  9. The new Drop Tower catapult system

    Science.gov (United States)

    von Kampen, Peter; Kaczmarczik, Ulrich; Rath, Hans J.

    2006-07-01

    The Center of Applied Space Technology and Microgravity (ZARM) was founded in 1985 as an institute of the University Bremen, which focuses on research on gravitational and space-related phenomena. In 1988, the construction of the "Drop Tower" began. Since then, the eye-catching tower with a height of 146 m and its characteristic glass roof has become the emblem of the technology centre in Bremen. The Drop Tower Bremen provides a facility for experiments under conditions of weightlessness. Items are considered weightless, when they are in "free fall", i.e. moving without propulsion within the gravity field of the earth. The height of the tower limits the simple "free fall" experiment period to max. 4.74 s. With the inauguration of the catapult system in December 2004, the ZARM is entering a new dimension. This world novelty will meet scientists' demands of extending the experiment period up to 9.5 s. Since turning the first sod on May 3rd, 1988, the later installation of the catapult system has been taken into account by building the necessary chamber under the tower. The catapult system is located in a chamber 10 m below the base of the tower. This chamber is almost completely occupied by 12 huge pressure tanks. These tanks are placed around the elongation of the vacuum chamber of the drop tube. In its centre there is the pneumatic piston that accelerates the drop capsule by the pressure difference between the vacuum inside the drop tube and the pressure inside the tanks. The acceleration level is adjusted by means of a servo hydraulic breaking system controlling the piston velocity. After only a quarter of a second the drop capsule achieves its lift-off speed of 175 km/h. With this exact speed, the capsule will rise up to the top of the tower and afterwards fall down again into the deceleration unit which has been moved under the drop tube in the meantime. The scientific advantages of the doubled experiment time are obvious: during almost 10 s of high

  10. Accidental Entry of Fish into Throat While Bathing in a Pond

    Directory of Open Access Journals (Sweden)

    Pradipta Kumar Parida

    2013-01-01

    Full Text Available While fish bones are common foreign bodies in the throat, a whole live fish in the pharynx is very rare. We report a case where a whole fish accidentally entered the throat of a 52-year-old male, where it became lodged causing throat pain and dysphagia. The fish was removed as an emergency procedure.

  11. Accidental cloning of a single-photon qubit in two-channel continuous-variable quantum teleportation

    International Nuclear Information System (INIS)

    Ide, Toshiki; Hofmann, Holger F.

    2007-01-01

    The information encoded in the polarization of a single photon can be transferred to a remote location by two-channel continuous-variable quantum teleportation. However, the finite entanglement used in the teleportation causes random changes in photon number. If more than one photon appears in the output, the continuous-variable teleportation accidentally produces clones of the original input photon. In this paper, we derive the polarization statistics of the N-photon output components and show that they can be decomposed into an optimal cloning term and completely unpolarized noise. We find that the accidental cloning of the input photon is nearly optimal at experimentally feasible squeezing levels, indicating that the loss of polarization information is partially compensated by the availability of clones

  12. Theory of magnetostriction of electron-hole drops in Ge

    International Nuclear Information System (INIS)

    Markiewicz, R.S.

    1978-01-01

    A large mass of electron-hole liquid (γ drop) formed in a strain-induced potential well in Ge is known to distort its shape significantly in a magnetic field B > or approx. = 1 kG. It is shown in this paper that the shape change can be understood in detail as due to a ''recombination current'' of electron-hole pairs needed to replace those pairs which recombine in the drop volume. The Lorentz force deflects this current and produces a macroscopic dipole current loop inside the drop. The drop then changes shape to minimize its total energy, including magnetic, strain, and surface energies. While the drop usually flattens along the field direction, both para- and diamagnetic effects (elongated drops) are found to be possible, depending on excitation conditions, in accord with experiment. Similar effects are predicted to occur in small drops in unstrained Ge. This paper presents a magnetohydrodynamic theory of the magnetostriction which takes into account density variations which occur in the strain well and in high magnetic fields. A simpler theory is given for the special case in which the drop may be considered incompressible (small drops and moderate fields). Effects of carrier mass anisotropy and fluid viscosity are taken into consideration

  13. Ground Motion Prediction Equations Empowered by Stress Drop Measurement

    Science.gov (United States)

    Miyake, H.; Oth, A.

    2015-12-01

    Significant variation of stress drop is a crucial issue for ground motion prediction equations and probabilistic seismic hazard assessment, since only a few ground motion prediction equations take into account stress drop. In addition to average and sigma studies of stress drop and ground motion prediction equations (e.g., Cotton et al., 2013; Baltay and Hanks, 2014), we explore 1-to-1 relationship for each earthquake between stress drop and between-event residual of a ground motion prediction equation. We used the stress drop dataset of Oth (2013) for Japanese crustal earthquakes ranging 0.1 to 100 MPa and K-NET/KiK-net ground motion dataset against for several ground motion prediction equations with volcanic front treatment. Between-event residuals for ground accelerations and velocities are generally coincident with stress drop, as investigated by seismic intensity measures of Oth et al. (2015). Moreover, we found faster attenuation of ground acceleration and velocities for large stress drop events for the similar fault distance range and focal depth. It may suggest an alternative parameterization of stress drop to control attenuation distance rate for ground motion prediction equations. We also investigate 1-to-1 relationship and sigma for regional/national-scale stress drop variation and current national-scale ground motion equations.

  14. Pressure Drop of Chamfer on Spacer Grid Strap

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Euijae; Kim, Kanghoon; Kim, Kyounghong; Nahm, Keeyil [KEPCO Nuclear Fuel Co., Daejeon (Korea, Republic of)

    2014-05-15

    A swirl flow and cross flow are generated by the spacer grid with mixing vane that enhances the thermal performance and critical heat flux (CHF). The additional pressure drop makes it difficult to meet acceptance criteria for overall pressure drop in fuel assembly depending upon the pump capacity. The chamfer on the end of spacer grid strap is one solution to reduce additional pressure drop without any adverse effect on flow fields. In this research, the pressure drop tests for spacer grid with and without chamfer were carried out at the hydraulic test facility. The result can be applied to develop high performance nuclear fuel assemblies for Pressurized Water Reactor (PWR) plants. The pressure drop tests for 5x5 spacer grid with and without chamfer as well as 6x6 spacer grid with and without chamfer were carried out at the INFINIT test facility. The Reynolds number ranged about from 16000 to 75000. The sweep-up and sweep-down test showed that the direction of sweep did not affect the pressure drop. The chamfer on spacer grid strap reduced the pressure drop due to the decreased in ratio of inlet area to outlet area. The pressure loss coefficient for spacer grid with chamfer was by up to 13.8 % lower than that for spacer grid without chamfer. Hence, the chamfer on spacer grid strap was one of effective ways to reduce the pressure drop.

  15. Drop impact entrapment of bubble rings

    KAUST Repository

    Thoraval, M.-J.

    2013-04-29

    We use ultra-high-speed video imaging to look at the initial contact of a drop impacting on a liquid layer. We observe experimentally the vortex street and the bubble-ring entrapments predicted numerically, for high impact velocities, by Thoraval et al. (Phys. Rev. Lett., vol. 108, 2012, article 264506). These dynamics mainly occur within 50 -s after the first contact, requiring imaging at 1 million f.p.s. For a water drop impacting on a thin layer of water, the entrapment of isolated bubbles starts through azimuthal instability, which forms at low impact velocities, in the neck connecting the drop and pool. For Reynolds number Re above -12 000, up to 10 partial bubble rings have been observed at the base of the ejecta, starting when the contact is -20% of the drop size. More regular bubble rings are observed for a pool of ethanol or methanol. The video imaging shows rotation around some of these air cylinders, which can temporarily delay their breakup into micro-bubbles. The different refractive index in the pool liquid reveals the destabilization of the vortices and the formation of streamwise vortices and intricate vortex tangles. Fine-scale axisymmetry is thereby destroyed. We show also that the shape of the drop has a strong influence on these dynamics. 2013 Cambridge University Press.

  16. Marangoni Flow Induced Evaporation Enhancement on Binary Sessile Drops.

    Science.gov (United States)

    Chen, Pin; Harmand, Souad; Ouenzerfi, Safouene; Schiffler, Jesse

    2017-06-15

    The evaporation processes of pure water, pure 1-butanol, and 5% 1-butanol aqueous solution drops on heated hydrophobic substrates are investigated to determine the effect of temperature on the drop evaporation behavior. The evolution of the parameters (contact angle, diameter, and volume) during evaporation measured using a drop shape analyzer and the infrared thermal mapping of the drop surface recorded by an infrared camera were used in investigating the evaporation process. The pure 1-butanol drop does not show any thermal instability at different substrate temperatures, while the convection cells created by the thermal Marangoni effect appear on the surface of the pure water drop from 50 °C. Because 1-butanol and water have different surface tensions, the infrared video of the 5% 1-butanol aqueous solution drop shows that the convection cells are generated by the solutal Marangoni effect at any substrate temperature. Furthermore, when the substrate temperature exceeds 50 °C, coexistence of the thermal and solutal Marangoni flows is observed. By analyzing the relation between the ratio of the evaporation rate of pure water and 1-butanol aqueous solution drops and the Marangoni number, a series of empirical equations for predicting the evaporation rates of pure water and 1-butanol aqueous solution drops at the initial time as well as the equations for the evaporation rate of 1-butanol aqueous solution drop before the depletion of alcohol are derived. The results of these equations correspond fairly well to the experimental data.

  17. Drop-out rate and drop-out reasons among promising Norwegian track and field athletes: a 25 year study

    OpenAIRE

    Enoksen, Eystein

    2011-01-01

    © Eystein Enoksen, 2011 The aim of the present study was to identify the total drop-out rate and drop-out reasons for a group of promising track and field athletes. 202 males and 98 females, aged 16 ±2 years, took part in this study. Questionnaires were administrated in 1975, 1983, and 1989. In-depth interviews were conducted in 1989 and in 2000. A chi-square test was administrated to test the difference between males and females dropping out and to test the most significant reasons influe...

  18. EVOLUCIÓN DE LA MORTALIDAD POR ACCIDENTES INFANTILES Y SU DISTRIBUCIÓN GEOGRÁFICA EN ESPAÑA (1975-1994

    Directory of Open Access Journals (Sweden)

    Miguel Ruiz Ramos

    2001-01-01

    Full Text Available Fundamentos: En los países desarrollados los accidentes infantiles ocupan los primeros lugares como causa de mortalidad. El objetivo de este trabajo es describir su evolución en España desde 1975 a 1994, así como su distribución por Comunidades Autónomas. Método: Con las defunciones por accidentes y las poblaciones de España y sus Comunidades Autónomas de 1 a 14 años de las estadísticas oficiales de mortalidad se han calculado los siguientes indicadores: porcentajes sobre el total de defunciones, tasas brutas de mortalidad, tasas ajustadas por edad, tasas específicas por grupos de edad y riesgos relativos. Estos indicadores han sido calculados por género, año de defunción y Comunidad Autónoma. Resultados: Entre 1975 y 1994 se ha reducido la mortalidad por accidentes infantiles en España, en un 3% anual en las niñas y en un 3,5% en los niños. La razón niños/niñas se ha mantenido alrededor de 2. Los accidentes de tráfico han supuesto en torno al 50%. Aragón presentaba el riego relativo más bajo tanto en niñas como en niños, con 0,54 y 0,57 respectivamente, y Galicia el más alto con 1,73 en niñas y 1,91 en niños. El porcentaje sobre el total de defunciones infantiles fue muy variable entre las Comunidades Autónomas, mientras que el porcentaje de accidentes de tráfico estuvo alrededor del 50% en todas las Comunidades Autónomas. Conclusiones: En España la mortalidad por accidentes infantiles ha descendido de una manera notable, en la actualidad se estima que los niños mueren un 50% menos que en 1975. La distribución por Comunidades Autónomas presenta grandes diferencias.

  19. Outcome of accidental hypothermia with or without circulatory arrest. Experience from the Danish Præstø Fjord boating accident

    DEFF Research Database (Denmark)

    Wanscher, Michael Christopher J; Sørensen, Lisbeth Agersnap; Ravn, Jesper Bohsen

    2012-01-01

    Resuscitation guidelines for the treatment of accidental hypothermia are based primarily on isolated cases. Mortality rates are high despite aggressive treatment aimed at restoring spontaneous circulation and normothermia.......Resuscitation guidelines for the treatment of accidental hypothermia are based primarily on isolated cases. Mortality rates are high despite aggressive treatment aimed at restoring spontaneous circulation and normothermia....

  20. Accidental Strangulation Due to Entrapment of Saree in Crop Thrasher Machine in an Elderly Women Working at Agricultural Field.

    Science.gov (United States)

    Parchake, Manoj Bhausaheb; Kumre, Vikas; Kachare, Rajesh V

    2016-09-01

    Strangulation is generally considered as homicidal death and in accidental strangulation circumstantial evidence alone can point toward the accidental nature of incidence. In present case, a 71-year-old woman, wearing a saree (garment worn by traditional women in India) working in agricultural field, got entangled in the crop thrasher machine and got strangled. Immediately, she was taken to the nearest hospital, where she survived for 6 to 8 hours and then died. The autopsy reveals cross ribbon-shaped ligature mark on neck and anterior chest along with 1 puncture wound at the right lateral aspect of the neck. A lack of proper precaution and safety measures at agricultural field are other contributing factors. Accidental strangulation by saree is extremely rare, hence, this case is presented for its rarity and pattern of injury.

  1. University Drop-Out: An Italian Experience

    Science.gov (United States)

    Belloc, Filippo; Maruotti, Antonello; Petrella, Lea

    2010-01-01

    University students' drop-out is a crucial issue for the universities' efficiency evaluation and funding. In this paper, we analyze the drop-out rate of the Economics and Business faculty of Sapienza University of Rome. We use administrative data on 9,725 undergraduates students enrolled in three-years bachelor programs from 2001 to 2007 and…

  2. The Scenario Model Intercomparison Project (ScenarioMIP) for CMIP6

    Energy Technology Data Exchange (ETDEWEB)

    O' Neill, Brian C.; Tebaldi, Claudia; van Vuuren, Detlef P.; Eyring, Veronika; Friedlingstein, Pierre; Hurtt, George; Knutti, Reto; Kriegler, Elmar; Lamarque, Jean-Francois; Lowe, Jason; Meehl, Gerald A.; Moss, Richard; Riahi, Keywan; Sanderson, Benjamin M.

    2016-01-01

    Projections of future climate change play a fundamental role in improving understanding of the climate system as well as characterizing societal risks and response options. The Scenario Model Intercomparison Project (ScenarioMIP) is the primary activity within Phase 6 of the Coupled Model Intercomparison Project (CMIP6) that will provide multi-model climate projections based on alternative scenarios of future emissions and land use changes produced with integrated assessment models. In this paper, we describe ScenarioMIP's objectives, experimental design, and its relation to other activities within CMIP6. The ScenarioMIP design is one component of a larger scenario process that aims to facilitate a wide range of integrated studies across the climate science, integrated assessment modeling, and impacts, adaptation, and vulnerability communities, and will form an important part of the evidence base in the forthcoming Intergovernmental Panel on Climate Change (IPCC) assessments. At the same time, it will provide the basis for investigating a number of targeted science and policy questions that are especially relevant to scenario-based analysis, including the role of specific forcings such as land use and aerosols, the effect of a peak and decline in forcing, the consequences of scenarios that limit warming to below 2 °C, the relative contributions to uncertainty from scenarios, climate models, and internal variability, and long-term climate system outcomes beyond the 21st century. To serve this wide range of scientific communities and address these questions, a design has been identified consisting of eight alternative 21st century scenarios plus one large initial condition ensemble and a set of long-term extensions, divided into two tiers defined by relative priority. Some of these scenarios will also provide a basis for variants planned to be run in other CMIP6-Endorsed MIPs to investigate questions related to specific forcings. Harmonized, spatially

  3. Acoustic forcing of a liquid drop

    Science.gov (United States)

    Lyell, M. J.

    1992-01-01

    The development of systems such as acoustic levitation chambers will allow for the positioning and manipulation of material samples (drops) in a microgravity environment. This provides the capability for fundamental studies in droplet dynamics as well as containerless processing work. Such systems use acoustic radiation pressure forces to position or to further manipulate (e.g., oscillate) the sample. The primary objective was to determine the effect of a viscous acoustic field/tangential radiation pressure forcing on drop oscillations. To this end, the viscous acoustic field is determined. Modified (forced) hydrodynamic field equations which result from a consistent perturbation expansion scheme are solved. This is done in the separate cases of an unmodulated and a modulated acoustic field. The effect of the tangential radiation stress on the hydrodynamic field (drop oscillations) is found to manifest as a correction to the velocity field in a sublayer region near the drop/host interface. Moreover, the forcing due to the radiation pressure vector at the interface is modified by inclusion of tangential stresses.

  4. Scenarios of forestry carbon sequestration measures in the Russian Federation and priorities for action plan

    Energy Technology Data Exchange (ETDEWEB)

    Kokorin, A.O. [Institute of Global Climate and Ecology, Moscow (Russian Federation)

    1996-12-31

    Development of forestry mitigation strategy under Russian transition economy conditions has many difficulties and specific features. The most important factors are: shortage in funds; absence of well defined legislation, rules and standards; absence of adequate control systems; weak transport infrastructure and export problems. Assessment of economic possibilities, potential, short- and middle-term measures show that strategies have to be focused on improvement and promotion of current carbon sequestration activity. Five baseline forestry scenario (No. 1) and four other scenarios (No. 2 - No. 5) for 2000-2040 were developed. Each scenario covers all forested area but provides separate analysis of 30 `forestry ecoregions`. Three types of forestry management were included in scenarios: clear-cut logging and reforestation (by scenarios No. 2 and No. 3); selective logging and thinning (No. 4); measures to prevent and manage fires (No. 5). The baseline scenario results in a constant net-sink of about 150 MtC/yr. An increase in clear-cut logging on the basis of current forestry practice will cause a rapid drop of net-sink. Implementation of a modest increase in clear-cut logging with active forest fire and selective logging measures could provide with a slight increase of net-sink. Consideration of scenarios helps identify regional forestry priorities for Russian Climate Change Action Plan. The priorities by region include: European-Ural: (1) creation of economy mechanism to increase forestry effectiveness on the same cutting areas, (2) assistance to natural reforestation. Central and North-East Siberia: promotion of forest fire protection system. South Siberia and Primorie and Priamurie: limit of clear-cut logging and creation market situation for better forestry efficiency. The proposed Joint Implementation Vologda reforestation project which is being considered now by special bodies of the USA and the Russian Federation is in good agreement with these priorities.

  5. Evaporation of a sessile water drop and a drop of aqueous salt solution.

    Science.gov (United States)

    Misyura, S Y

    2017-11-07

    The influence of various factors on the evaporation of drops of water and aqueous salt solution has been experimentally studied. Typically, in the studies of drop evaporation, only the diffusive vapor transfer, radiation and the molecular heat conduction are taken into account. However, vapor-gas convection plays an important role at droplet evaporation. In the absence of droplet boiling, the influence of gas convection turns out to be the prevailing factor. At nucleate boiling, a prevailing role is played by bubbles generation and vapor jet discharge at a bubble collapse. The gas convection behavior for water and aqueous salt solution is substantially different. With a growth of salt concentration over time, the influence of the convective component first increases, reaches an extremum and then significantly decreases. At nucleate boiling in a salt solution it is incorrect to simulate the droplet evaporation and the heat transfer in quasi-stationary approximation. The evaporation at nucleate boiling in a liquid drop is divided into several characteristic time intervals. Each of these intervals is characterized by a noticeable change in both the evaporation rate and the convection role.

  6. The origin of star-shaped oscillations of Leidenfrost drops

    Science.gov (United States)

    Ma, Xiaolei; Burton, Justin C.

    We experimentally investigate the oscillations of Leidenfrost drops of water, liquid nitrogen, ethanol, methanol, acetone and isopropyl alcohol. The drops levitate on a cushion of evaporated vapor over a hot, curved surface which keeps the drops stationary. We observe star-shaped modes along the periphery of the drop, with mode numbers n = 2 to 13. The number of observed modes is sensitive to the properties of the liquid. The pressure oscillation frequency in the vapor layer under the drop is approximately twice that of the drop frequency, which is consistent with a parametric forcing mechanism. However, the Rayleigh and thermal Marangoni numbers are of order 10,000, indicating that convection should play a dominating role as well. Surprisingly, we find that the wavelength and frequency of the oscillations only depend on the thickness of the liquid, which is twice the capillary length, and do not depend on the mode number, substrate temperature, or the substrate curvature. This robust behavior suggests that the wavelength for the oscillations is set by thermal convection inside the drop, and is less dependent on the flow in the vapor layer under the drop

  7. Factores de riesgo relacionados con los accidentes domésticos

    Directory of Open Access Journals (Sweden)

    Nereida Pacios Alfonso

    1998-10-01

    Full Text Available Se realiza observación de los factores de riesgo en 176 hogares durante 12 meses. Se clasifican los apartamentos en 3 grupos según el número de factores detectados. Se visitan trimestralmente y se observan las características de los accidentes domésticos ocurridos. En el 30% de los hogares se concentra el 63% de los accidentes, la morbilidad mayor se concentra en los hogares en que hay mayor número de factores de riesgo, lo que nos hace pensar que el trabajo educativo debe ser planificado y diferenciado, especialmente dirigido a modificar conductas en los hogares de alto riesgo para hacer más efectiva la prevención del fenómenoRisk factors are observed at 176 homes during 12 months. Apartments are classified into 3 groups according to the number of factors. Homes are quarterly visited and the characteristics of the accidents occurred are analyzed. 63 % of the accidents are detected in 30 % of the houses. The highest morbidity is concentrated on those houses having more risk factors, which makes us think that the educative work must be planned and differentiated, specially directed to modify conducts at high risk houses in order to make the prevention of the phenomenon more effective

  8. Beaconless Georouting Under The Spotlight: Practical Link Models and Application Scenarios

    KAUST Repository

    Bader, Ahmed

    2015-06-18

    Beaconless georouting has emerged as a viable packetforwarding technique in distributed wireless networks, particularly for applications requiring portability and scalability. In this paper, we focus on fine-tuning and developing the analytical tools associated with the study of beaconless georouting protocols. For instance, they have been traditionally analyzed and simulated from the perspective of a single hop only. However, end-to-end performance analysis is instrumental when considering practical application scenarios. Furthermore, beaconless georouting protocols have been studied in literature assuming equal communication ranges for the data and control packets. In reality, this is not true since the communication range is actually a function of the packet length (among other factors). Control packets are typically much shorter than data packets. As a consequence, a substantial discrepancy exists in practice between their respective communication ranges, causing many data packet drops. Accordingly, we introduce two simple strategies for bridging the gap between the control and data packet communication ranges. Our primary objective in this paper is to construct a realistic analysis describing the end-to-end performance of beaconless georouting protocols. Two flagship protocols are selected in this paper for further investigation. For a better perspective, the two protocols are actually compared to a hypothetical limit case, one which offers optimal energy and latency performance. Finally, we present four different application scenarios. For each scenario, we highlight the georouting protocol which performs the best and discuss the reasons behind it. © 2007-2012 IEEE.

  9. DROpS: an object of learning in computer simulation of discrete events

    Directory of Open Access Journals (Sweden)

    Hugo Alves Silva Ribeiro

    2015-09-01

    Full Text Available This work presents the “Realistic Dynamics Of Simulated Operations” (DROpS, the name given to the dynamics using the “dropper” device as an object of teaching and learning. The objective is to present alternatives for professors teaching content related to simulation of discrete events to graduate students in production engineering. The aim is to enable students to develop skills related to data collection, modeling, statistical analysis, and interpretation of results. This dynamic has been developed and applied to the students by placing them in a situation analogous to a real industry, where various concepts related to computer simulation were discussed, allowing the students to put these concepts into practice in an interactive manner, thus facilitating learning

  10. Insect wings as retrospective/accidental/forensic dosimeters: An optically stimulated luminescence investigation

    International Nuclear Information System (INIS)

    Kazakis, Nikolaos A.; Tsetine, Anastasia Th.; Kitis, George; Tsirliganis, Nestor C.

    2016-01-01

    Estimation of the radiation released during nuclear accidents or radiological terrorist events is imperative for the prediction of health effects following such an exposure. In addition, in several cases there is a need to identify the prior presence of radioactive materials at buildings or sites (nuclear forensics). To this direction, several materials have been the research object of numerous studies the last decade in an attempt to identify potentially new retrospective/accidental/forensic dosimeters. However, the studies targeting biological materials are limited and their majority is mainly focused on the luminescence behavior of human biological material. Consequently, the use of such materials in retrospective dosimetry presumes the exposure of humans in the radiation field. The present work constitutes the first attempt to seek non-human biological materials, which can be found in nature in abundance or in/on other living organisms. To this end, the present work investigates the basic optically stimulated luminescence behavior of insect wings, which exhibit several advantages compared to other materials. Insects are ubiquitous, have a short life expectancy and exhibit a low decomposition rate after their death. Findings of the present study are encouraging towards the potential use of insects' wings at retrospective/accidental/forensic dosimetry, since they exhibit linear OSL response over a wide dose range and imperceptible loss of signal several days after their irradiation when they are kept in dark. On the other hand, the calculated lower detection limit is not low enough to allow their use as emergency dosimeters when individuals are exposed to non-lethal doses. In addition, wings exhibit strong optical fading when they are exposed to daylight and thus special care should be taken during the sampling procedure in order to use the wings as accidental/forensic dosimeters, by seeking (dead) insects in dark places, such as behind furniture, equipment or in

  11. Propelling a water drop with the vapor-mediated Marangoni effect

    Science.gov (United States)

    Kim, Seungho; Kim, Ho-Young

    2013-11-01

    We show that a water drop on solid surfaces can be propelled just by placing a volatile alcohol drop nearby. It is found to be because the water-air interface near the alcohol drop mixes with alcohol vapor, thereby locally lowering the surface tension. The surface-tension-gradient induces the motion of the water drop, enabling the trajectory control of water drops through the motion of remote alcohol drops. This vapor-mediated Marangoni effect also gives rise to other interesting interfacial flow phenomena, such as nucleation of holes on a water film and ballooning of a water drop hanging from a syringe needle with the approach of an alcohol drop. We visualize such interfacial dynamics with a high-speed camera and rationalize their salient features by scaling analysis. This work was supported by the National Research Foundation of Korea (grant no. 2012-008023).

  12. Allelic drop-out probabilities estimated by logistic regression

    DEFF Research Database (Denmark)

    Tvedebrink, Torben; Eriksen, Poul Svante; Asplund, Maria

    2012-01-01

    We discuss the model for estimating drop-out probabilities presented by Tvedebrink et al. [7] and the concerns, that have been raised. The criticism of the model has demonstrated that the model is not perfect. However, the model is very useful for advanced forensic genetic work, where allelic drop-out...... is occurring. With this discussion, we hope to improve the drop-out model, so that it can be used for practical forensic genetics and stimulate further discussions. We discuss how to estimate drop-out probabilities when using a varying number of PCR cycles and other experimental conditions....

  13. Making use of scenarios : supporting scenario use in product design

    NARCIS (Netherlands)

    Anggreeni, Irene

    2010-01-01

    The discipline of Scenario-Based Product Design (SBPD) guides the use of scenarios in a product design process. As concrete narratives, scenarios could facilitate making explicit how users would use the designed product in their activities, allowing usability studies to be an integrated part of the

  14. ESTADO ACTUAL DE LA PREVENCIÓN DE LOS ACCIDENTES DE MONTAÑA EN ARAGÓN

    Directory of Open Access Journals (Sweden)

    Ma. Antonia Nerín

    2005-01-01

    - Establecer las necesidades de los colectivos implicados (usuarios, profesionales e nstituciones para reducir la incidencia y severidad de los accidentes de montaña. Para ello, hemos utilizado los resultados de las campañas institucionales Montañas para Vivirlas Seguro de los años 2000, 2001 y 2002, se han analizado las ocupaciones relacionadas con las actividades deportivas en la montaña y hemos consultado directamente con las instituciones implicadas. El nivel de formación e información del usuario de la montaña en Aragón no es el adecuado para el riesgo potencial de las actividades de montaña; mientras que se evidencia la necesidad de reglar algunas profesiones de la montaña. El rescate en montaña es efectivo, eficaz y eficiente; la medicalización es efectiva, eficaz y no eficiente (atendiendo a los criterios de necesidad, oferta y demanda y la prevención -a pesar de los esfuerzos- es no eficaz, no eficiente y no efectiva. Por todo ello, es urgente la creaciÛn de un servicio de vigilancia de los accidentes de montaña, así como un centro que coordine las propuestas y actuaciones orientadas a prevenir los acci-dentes de montaña.

  15. Drop Performance Test of CRDMs for JRTR

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Myoung-Hwan; Cho, Yeong-Garp; Chung, Jong-Ha [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Jung-Hyun [POSCO Plandtec Co. Ltd, Ulsan (Korea, Republic of); Lee, Kwan-Hee [RIST, Pohang (Korea, Republic of)

    2015-10-15

    The drop test results of CRDMs with AC-type electromagnet show that the initial delay times are not satisfied with the requirement, 0.15 seconds. After the replacement of the electromagnet from AC-type to DCtype, the drop times of CARs and accelerations due to the impact of moving parts are satisfied with all requirements. As a result, it is found that four CRDMs to be installed at site have a good drop performance, and meet all performance requirements. A control rod drive mechanism (CRDM) is a device to control the position of a control absorber rod (CAR) in the core by using a stepping motor which is commanded by the reactor regulating system (RRS) to control the reactivity during the normal operation of the reactor. The top-mounted CRDM driven by the stepping motor for Jordan Research and Training Reactor (JRTR) has been developed in KAERI. The CRDM for JRTR has been optimized by the design improvement based on that of the HANARO. It is necessary to verify the performances such as the stepping, drop, endurance, vibration, seismic and structural integrity for active components. Especially, the CAR drop curves are important data for the safety analysis. This paper describes the test results to demonstrate the drop performances of a prototype and 4 CRDMs to be installed at site. The tests are carried out at a test rig simulating the actual reactor's conditions.

  16. Research on combustion of black-liquor drops

    International Nuclear Information System (INIS)

    Macek, A.

    1999-01-01

    Black liquor, the major by-product of the kraft process for production of pulp, is one of the most important industrial fuels. It is burned in recovery boilers in the form of large spray drops (mm), with the objective of simultaneous recovery of heat and chemicals (sodium and sulfur). Even though black-liquor combustion in boilers has been practised for over half a century, research efforts toward improvement of combustion efficiency and abatement of environmental emissions are much more recent. The present paper addresses a specific aspect of that research, namely, elucidation of processes which occur during combustion of black-liquor drops in boiler-gas streams. The paper (a) gives a brief description of the kraft process, (b) reviews the experimental and theoretical (modeling) research advances on combustion of kraft-liquor drops during the 1980s and 1990s, (c) re-examines the results of an earlier combustion study in which black-liquor drops were observed in free flight at temperatures near those in recovery boilers, and (d) recommends input for the modeling of in-flight combustion of kraft-liquor drops in recovery boilers. (author)

  17. The evaporation of the charged and uncharged water drops

    Indian Academy of Sciences (India)

    Drop evaporation; ventilation coefficient; evaporation-effect of electrical forces. ... to study the effect of ventilation on the rate of evaporation of the millimeter sized ... a ventilated drop to reach its equilibrium temperature increases with the drop ...

  18. Dying scenarios improve recall as much as survival scenarios.

    Science.gov (United States)

    Burns, Daniel J; Hart, Joshua; Kramer, Melanie E

    2014-01-01

    Merely contemplating one's death improves retention for entirely unrelated material learned subsequently. This "dying to remember" effect seems conceptually related to the survival processing effect, whereby processing items for their relevance to being stranded in the grasslands leads to recall superior to that of other deep processing control conditions. The present experiments directly compared survival processing scenarios with "death processing" scenarios. Results showed that when the survival and dying scenarios are closely matched on key dimensions, and possible congruency effects are controlled, the dying and survival scenarios produced equivalently high recall levels. We conclude that the available evidence (cf. Bell, Roer, & Buchner, 2013; Klein, 2012), while not definitive, is consistent with the possibility of overlapping mechanisms.

  19. Generic versus brand-name North American topical glaucoma drops.

    Science.gov (United States)

    Mammo, Zaid N; Flanagan, John G; James, David F; Trope, Graham E

    2012-02-01

    To determine whether brand-name glaucoma drops differ from generic equivalents in bottle design, viscosity, surface tension, and volume in North America. Experimental study. We studied 5 bottles each of 11 kinds of glaucoma drops. Density-based calculations of drop volume were assessed using 0.1 mg analytic balance. Viscosity was measured using rotational rheometery. Bottle tip diameter was measured using 0.05 mm Vernier calipers. Surface tension was measured using a Fisher Scientific (Ottawa, ON) tensiometer. For the American brand-name Timoptic XE, the average drop volume was 38 ± 3.1 μL versus 24 ± 1.5 μL of Timolol GFS (p brand-name Timoptic XE, the average drop volume was 42 ± 4.0 μL versus 25 ± 2 μL of timolol maleate EX (p brand-name Timoptic drop volume was 28 ± 1.4 μL versus 35 ± 1.9 μL Apo-Timop (p brand-name Timoptic delivered significantly smaller drop volumes than generic Apo-Timop. Careful consideration should be given to drop viscosity and bottle design when generic ophthalmic products are evaluated for interchangeability and market entry. Copyright © 2012 Canadian Ophthalmological Society. Published by Elsevier Inc. All rights reserved.

  20. Electric generation and ratcheted transport of contact-charged drops

    Science.gov (United States)

    Cartier, Charles A.; Graybill, Jason R.; Bishop, Kyle J. M.

    2017-10-01

    We describe a simple microfluidic system that enables the steady generation and efficient transport of aqueous drops using only a constant voltage input. Drop generation is achieved through an electrohydrodynamic dripping mechanism by which conductive drops grow and detach from a grounded nozzle in response to an electric field. The now-charged drops are transported down a ratcheted channel by contact charge electrophoresis powered by the same voltage input used for drop generation. We investigate how the drop size, generation frequency, and transport velocity depend on system parameters such as the liquid viscosity, interfacial tension, applied voltage, and channel dimensions. The observed trends are well explained by a series of scaling analyses that provide insight into the dominant physical mechanisms underlying drop generation and ratcheted transport. We identify the conditions necessary for achieving reliable operation and discuss the various modes of failure that can arise when these conditions are violated. Our results demonstrate that simple electric inputs can power increasingly complex droplet operations with potential opportunities for inexpensive and portable microfluidic systems.

  1. Inverse Leidenfrost effect: self-propelling drops on a bath

    Science.gov (United States)

    Gauthier, Anais; van der Meer, Devaraj; Lohse, Detlef; Physics of Fluids Team

    2017-11-01

    When deposited on very hot solid, volatile drops can levitate over a cushion of vapor, in the so-called Leidenfrost state. This phenomenon can also be observed on a hot bath and similarly to the solid case, drops are very mobile due to the absence of contact with the substrate that sustains them. We discuss here a situation of ``inverse Leidenfrost effect'' where room-temperature drops levitate on a liquid nitrogen pool - the vapor is generated here by the bath sustaining the relatively hot drop. We show that the drop's movement is not random: the liquid goes across the bath in straight lines, a pattern only disrupted by elastic bouncing on the edges. In addition, the drops are initially self-propelled; first at rest, they accelerate for a few seconds and reach velocities of the order of a few cm/s, before slowing down. We investigate experimentally the parameters that affect their successive acceleration and deceleration, such as the size and nature of the drops and we discuss the origin of this pattern.

  2. Many Drops Interactions I: Simulation of Coalescence, Flocculation and Fragmentation of Multiple Colliding Drops with Smoothed Particle Hydrodynamics

    Directory of Open Access Journals (Sweden)

    Alejandro Acevedo-Malavé

    2012-06-01

    Full Text Available Smoothed Particle Hydrodynamics (SPH is a Lagrangian mesh-free formalism and has been useful to model continuous fluid. This formalism is employed to solve the Navier-Stokes equations by replacing the fluid with a set of particles. These particles are interpolation points from which properties of the fluid can be determined. In this study, the SPH method is applied to simulate the hydrodynamics interaction of many drops, showing some settings for the coalescence, fragmentation and flocculation problem of equally sized liquid drops in three-dimensional spaces. For small velocities the drops interact only through their deformed surfaces and the flocculation of the droplets arises. This result is very different if the collision velocity is large enough for the fragmentation of droplets takes place. We observe that for velocities around 15 mm/ms the coalescence of droplets occurs. The velocity vector fields formed inside the drops during the collision process are shown.

  3. The accidental (acoustical) tourist

    Science.gov (United States)

    Van Kirk, Wayne

    2002-11-01

    The acoustical phenomenon observed at an ancient temple in the Great Ball Court at Chichen Itza was described as ''little short of amazing--an ancient whispering gallery'' by Silvanus G. Morley, leader of the Carnegie Institute's archaeological team that excavated and restored these structures in the 1920s. Since then, many others have experienced the extraordinary acoustics at Chichen Itza and other Maya sites. Despite these reports, archaeologists and acousticians have until recently shown little interest in understanding these phenomena. After experiencing Chichen Itza's remarkable acoustics as a tourist in 1994, the author commenced collecting and disseminating information about acoustical phenomena there and at other Mayan sites, hoping to stimulate interest among archaeologists and acousticians. Were these designs accidental or intentional? If intentional, how was the knowledge obtained? How were acoustical features used? This paper highlights the author's collection of anecdotal reports of mysterious Mayan acoustics (http://http://www.ianlawton.com/pa1.htm), recommended reading for scientists and engineers who wish to pursue this fascinating study. Also recounted are some of the reactions of archaeologists-ranging from curious, helpful, and insightful to humorous and appalling--to outsiders' efforts to bring serious scientific attention to the new field of acoustical archaeology.

  4. Drop formation of black liquor spraying; Mustalipeaen pisaroituminen

    Energy Technology Data Exchange (ETDEWEB)

    Fogelholm, C J; Kankkunen, A; Nieminen, K; Laine, J; Miikkulainen, P [Helsinki Univ. of Technology, Otaniemi (Finland): Lab. of Energy Technology and Environmental Protection

    1997-10-01

    Black liquor is a spent liquor of the pulp and paper industry. It is burned in kraft recovery boilers for chemical and energy recovery. The high dry solids content and viscosity of black liquor require a high spraying temperature. This affects the performance of the boiler. Kraft recovery boiler deposit formation, emissions and chemical recovery are strongly affected by the drop size and the velocity of the black liquor spray formed by a splashplate nozzle. The sheet breakup mechanism is studied with a system based on a video and image-analysis. The drop size of mill-scale nozzles was measured also with an image-analysis-system. Measurements were carried out in a spray test chamber. The sheet breakup mechanism and drop size tests were carried out both below and over the boiling point of black liquor. Special attention was paid to the effect of flashing on drop formation. Temperature increase normally decreases drop size. In the temperature where the wavy-sheet disintegration changes to perforated-sheet disintegration the drop size increases. Spray velocity rises when the temperature is increased above the boiling point. (orig.)

  5. Ultrasonic defect-sizing using decibel drop methods. I

    International Nuclear Information System (INIS)

    Murphy, R.V.

    1987-03-01

    Results are reported of a study performed to investigate the accuracy and repeatability of various ultrasonic decibel (dB) drop sizing methods in determining the length, vertical extent and orientation of artificial and real weld flaws in thin steel sections. Seven artificial flaws and nine real weld flaws were examined; over 200 data plots were produced. The general findings are: a) length and vertical extent are assessed most accurately when using a 14 dB drop from the maximum indication amplitude; b) decibel drops less that 14 dB generally undersize flaws while decibel drops greater than 14 dB generally oversize flaws; c) flaws which are smaller than the width of the sound beam cannot be assessed accurately using dB drop methods; d) large flaws are assessed most accurately when the sound beam strikes the flaws at near normal incidence; e) the vertical extent and orientation of large flaws are plotted most accurately using the beam centre line method as opposed to the beam profile method; and, f) the limitations of dB-drop-sizing methods have considerable ramifications for CAN3-N285.4-M83 and ASME XI evaluation criteria

  6. Work-related accidents and diseases take a heavy toll worldwide Los accidentes y enfermedades laborales causan gran mortalidad en todo el mundo

    Directory of Open Access Journals (Sweden)

    2002-08-01

    Full Text Available Cada año mueren en todo el mundo unos dos millones de personas por enfermedades y accidentes laborales, pero la repercusión total es mucho mayor aun. Según el informe de la Organización Internacional del Trabajo (OIT titulado Informe introductorio: trabajo decente, trabajo seguro, de mayo de 2002, dependiendo del tipo de trabajo, por cada accidente mortal se producen 500 a 2 000 lesiones. Según la OIT, la principal causa de muerte relacionada con el trabajo es el cáncer, responsable de 32% de las muertes, seguido de las enfermedades circulatorias (23%, los accidentes (19% y las enfermedades transmisibles (17%. Las lesiones y las enfermedades laborales suponen un considerable costo económico. Cerca de 4% del producto interno bruto (PIB mundial se pierde en gastos de tratamiento e ingresos no percibidos. El informe de la OIT dice que se podría prevenir cerca de 80% de los accidentes y muertes laborales si todos los países que pertenecen a la organización aplicaran los métodos de prevención de accidentes ya existentes. En los países industrializados, las prioridades deben ser los factores psicosociales ligados a las malas relaciones y gestiones en el lugar de trabajo, las consecuencias mentales y físicas de las tareas repetitivas muy técnicas y la información sobre la manipulación de las nuevas tecnologías y sustancias, entre ellas los productos químicos. En los países que todavía están en fase de industrialización se les debería dar prioridad al mejoramiento de las prácticas sanitarias y de seguridad en las actividades primarias, como la agricultura, la pesca y la explotación maderera; la prevención de los accidentes industriales y la prevención de los accidentes y enfermedades en talleres informales e industrias domésticas.

  7. Factores asociados a los accidentes por exposición percutánea en personal de enfermería en un hospital de tercer nivel

    Directory of Open Access Journals (Sweden)

    Gallardo López Mª Teresa

    1997-01-01

    Full Text Available FUNDAMENTO: Los accidentes por exposición percutánea suponen aproximadamente un tercio de los accidentes laborales del personal sanitario hospitalario. Su importancia estriba en las enfermedades causadas por patógenos transmisibles por esta vía (hepatitis B, hepatitis C, infección VIH. Objetivos: describir los accidentes de este tipo notificados en un hospital de tercer nivel; identificar factores asociados a estos accidentes en personal de enfermería; construir un modelo predictivo del riesgo individual de accidentarse. MÉTODOS: Estudio descriptivo de una cohorte retrospectiva compuesta por todas las personas que notificaron un accidente entre el 1-1-93 y el 30-6-96. Estudio de casos y controles en el personal de enfermería durante el período 1-1-95 al 30-6-96, analizado mediante regresión logística múltiple. RESULTADOS: La incidencia acumulada de accidentes en un año fue de 0,078 para las/-os enfermeras/-os. En el 57,3% de los casos estuvieron implicadas agujas de jeringas desechables o precargadas. La incidencia acumulada en un año fue mayor para las agujas de cateterismo intravenoso (8,5 por 100.000. El riesgo de accidentabilidad, ajustado por variables confundentes, fue mayor para las/-os enfermeras/-os (OR=3,22; I.C.95%=1,96-5,27, para los trabajadores de la Unidad de Hemodiálisis (OR=35,21; I.C.95%=3,74-331,16 y para aquéllos con contrato eventual (OR=4,50; I.C.95%=2,24-9,04. CONCLUSIONES: Los accidentes por exposición percutánea en este hospital son más frecuentes entre el personal de enfermería y se producen, fundamentalmente, con algún tipo de aguja hueca. Se han identificado factores asociados a estos accidentes, lo que permite dirigir programas preventivos específicos sobre trabajadores con más riesgo. El modelo obtenido es válido para estimar el grado de accidentabilidad individual en los sujetos estudiados.

  8. Drop test of reinforced concrete slab onto storage cask

    International Nuclear Information System (INIS)

    Kato, Y.; Hattori, S.; Ito, C.; Sirai, K.; Ozaki, S.; Kato, O.

    1993-01-01

    In this research, drop tests onto full-scale casks considering the specifications of a falling object (weight, construction, drop height, etc.) demonstrate and evaluate the integrity of casks in case a heavy object drops into the storage facilities. (J.P.N.)

  9. EDITORIAL: Where next with global environmental scenarios? Where next with global environmental scenarios?

    Science.gov (United States)

    O'Neill, Brian; Pulver, Simone; Van Deveer, Stacy; Garb, Yaakov

    2008-12-01

    Scenarios have become a standard tool in the portfolio of techniques that scientists and policy-makers use to envision and plan for the future. Defined as plausible, challenging and relevant stories about how the future might unfold that integrate quantitative models with qualitative assessments of social and political trends, scenarios are a central component in assessment processes for a range of global issues, including climate change, biodiversity, agriculture, and energy. Yet, despite their prevalence, systematic analysis of scenarios is in its beginning stages. Fundamental questions remain about both the epistemology and scientific credibility of scenarios and their roles in policymaking and social change. Answers to these questions have the potential to determine the future of scenario analyses. Is scenario analysis moving in the direction of earth system governance informed by global scenarios generated through increasingly complex and comprehensive models integrating socio-economic and earth systems? Or will global environmental scenario analyses lose favour compared to more focused, policy-driven, regionally specific modelling? These questions come at an important time for the climate change issue, given that the scenario community, catalyzed by the Intergovernmental Panel on Climate Change (IPCC), is currently preparing to embark on a new round of scenario development processes aimed at coordinating research and assessment, and informing policy, over the next five to ten years. These and related questions about where next to go with global environmental scenarios animated a workshop held at Brown University (Note1) that brought together leading practitioners and scholars of global environmental change scenarios from research, policy-making, advocacy, and business settings. The workshop aimed to provide an overview of current practices/best practices in scenario production and scenario use across a range of global environmental change arenas. Participants

  10. ECMO for Cardiac Rescue after Accidental Intravenous Mepivacaine Application

    Directory of Open Access Journals (Sweden)

    Michael Froehle

    2012-01-01

    Full Text Available Mepivacaine is a potent local anaesthetic and used for infiltration and regional anaesthesia in adults and pediatric patients. Intoxications with mepivacaine affect mainly the CNS and the cardiovascular system. We present a case of accidental intravenous mepivacaine application and intoxication of an infant resulting in seizure, broad complex bradyarrhythmia, arterial hypotension and finally cardiac arrest. The patient could be rescued by prolonged resuscitations and a rapid initiation of ECMO and survived without neurological damage. The management strategies of this rare complication including promising other treatment options with lipid emulsions are discussed.

  11. Early diagnosis and monitoring of whole-body accidental exposure

    International Nuclear Information System (INIS)

    Flury-Herard, A.; Jullien, D.

    1987-01-01

    This paper deals with the handling of accidental, acute or protracted, whole-body overexposures. It is complementary to the report DPS 86/07 SEAPS previously published. The criteria for initial classification, as a function of the mean absorbed dose, the clinical and paraclinical evaluation, the monitoring methods and the treatments to undertake are described successively. The basic components of the therapy are the intensive care of the hematological syndrome with blood products transfusions and anti-infection prophylaxy. The indications and conditions for bone-marrow grafts are also discussed [fr

  12. Impact of ultra-viscous drops: air-film gliding and extreme wetting

    KAUST Repository

    Langley, Kenneth; Li, Erqiang; Thoroddsen, Sigurdur T

    2017-01-01

    water drop, the viscous-dominated flow in the thin air layer counteracts the inertia of the drop liquid. For highly viscous drops the viscous stresses within the liquid also affect the interplay between the drop and the gas. Here the drop also forms a

  13. Evaluation and mitigation of accidental releases of radioactivity

    International Nuclear Information System (INIS)

    Bruessermann, K.

    1982-12-01

    One result of the workshop was, that even in the case of severe accident sequences in modern nuclear power plants (other facilities were not discussed), there will be enough time to take active measures in order to lower the emissions and to diminish the consequences inside and outside of the plant. On the whole, new evidence from Harrisburg show that previously estimated accidental emissions, especially of radiologically relevant nuclides, have been rather conservative and that much lower emissions are possible, if the above measures are considered. Under accident conditions, models to predict radiation exposure must be applied under the event of a short-term release. (orig./DG) [de

  14. Radioactive releases into the environment under accidental conditions

    International Nuclear Information System (INIS)

    Beninson, D.

    1976-01-01

    Although accidents involving the release of radioactive materials and the unplanned exposure of people can occur at any stage of the nuclear fuel cycle, most attention has been focused on reactor accidents. Although no power reactor accidents involving exposure of the public have yet occured, it should be recognized that the probability of such accidental releases cannot be reduced to zero. Since the inventory of radioactive materials in power reactors is very large, it is usual to postulate, for safety assessments, that a release of fission products takes place in spite of all protective measures. This postulated release is of importance for reactor siting and for preparing emergency plans. (HP) [de

  15. Effect of humidity on the filter pressure drop

    International Nuclear Information System (INIS)

    Vendel, J.; Letourneau, P.

    1995-01-01

    The effects of humidity on the filter pressure drop have been reported in some previous studies in which it is difficult to draw definite conclusions. These studies show contradictory effects of humidity on the pressure drop probably due to differences in the hygroscopicity of the test aerosols. The objective of this paper is to present experimental results on the evolution of the filter pressure drop versus mass loading, for different test aerosols and relative humidities. Present results are compared to those found in various publication. An experimental device has been designed to measure filter pressure drop as the function of the areal density for relative humidity varying in the range of 9 % to 85 %. Experiments have been conducted with hygroscopic: (CsOH) and nonhygroscopic aerosols (TiO 2 ). Cesium hydroxyde (CsOH) of size of 2 μ M AMMD has been generated by an ultrasonic generator and the 0.7 μm AMMD titanium oxyde has been dispersed by a open-quotes turn-tableclose quotes generator. As it is noted in the BISWAS'publication [3], present results show, in the case of nonhygroscopic aerosols, a linear relationship of pressure drop to mass loading. For hygroscopic aerosols two cases must be considered: for relative humidity below the deliquescent point of the aerosol, the relationship of pressure drop to mass loading remains linear; above the deliquescent point, the results show a sudden increase in the pressure drop and the mass capacity of the filter is drastically reduced

  16. Effect of humidity on the filter pressure drop

    Energy Technology Data Exchange (ETDEWEB)

    Vendel, J.; Letourneau, P. [Institut de Protection et de Surete Nucleaire, Gif-sur-Yvette (France)

    1995-02-01

    The effects of humidity on the filter pressure drop have been reported in some previous studies in which it is difficult to draw definite conclusions. These studies show contradictory effects of humidity on the pressure drop probably due to differences in the hygroscopicity of the test aerosols. The objective of this paper is to present experimental results on the evolution of the filter pressure drop versus mass loading, for different test aerosols and relative humidities. Present results are compared to those found in various publication. An experimental device has been designed to measure filter pressure drop as the function of the areal density for relative humidity varying in the range of 9 % to 85 %. Experiments have been conducted with hygroscopic: (CsOH) and nonhygroscopic aerosols (TiO{sub 2}). Cesium hydroxyde (CsOH) of size of 2 {mu} M AMMD has been generated by an ultrasonic generator and the 0.7 {mu}m AMMD titanium oxyde has been dispersed by a {open_quotes}turn-table{close_quotes} generator. As it is noted in the BISWAS`publication [3], present results show, in the case of nonhygroscopic aerosols, a linear relationship of pressure drop to mass loading. For hygroscopic aerosols two cases must be considered: for relative humidity below the deliquescent point of the aerosol, the relationship of pressure drop to mass loading remains linear; above the deliquescent point, the results show a sudden increase in the pressure drop and the mass capacity of the filter is drastically reduced.

  17. Ballistic Jumping Drops on Superhydrophobic Surfaces via Electrostatic Manipulation.

    Science.gov (United States)

    Li, Ning; Wu, Lei; Yu, Cunlong; Dai, Haoyu; Wang, Ting; Dong, Zhichao; Jiang, Lei

    2018-02-01

    The ballistic ejection of liquid drops by electrostatic manipulating has both fundamental and practical implications, from raindrops in thunderclouds to self-cleaning, anti-icing, condensation, and heat transfer enhancements. In this paper, the ballistic jumping behavior of liquid drops from a superhydrophobic surface is investigated. Powered by the repulsion of the same kind of charges, water drops can jump from the surface. The electrostatic acting time for the jumping of a microliter supercooled drop only takes several milliseconds, even shorter than the time for icing. In addition, one can control the ballistic jumping direction precisely by the relative position above the electrostatic field. The approach offers a facile method that can be used to manipulate the ballistic drop jumping via an electrostatic field, opening the possibility of energy efficient drop detaching techniques in various applications. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Annual Occurrence of Meteorite-Dropping Fireballs

    Science.gov (United States)

    Konovalova, Natalia; Jopek, Tadeusz J.

    2016-07-01

    The event of Chelyabinsk meteorite has brought about change the earlier opinion about limits of the sizes of potentially dangerous asteroidal fragments that crossed the Earth's orbit and irrupted in the Earth's atmosphere making the brightest fireball. The observations of the fireballs by fireball networks allows to get the more precise data on atmospheric trajectories and coordinates of predicted landing place of the meteorite. For the reason to search the periods of fireball activity is built the annual distribution of the numbers of meteorites with the known fall dates and of the meteorite-dropping fireballs versus the solar longitude. The resulting profile of the annual activity of meteorites and meteorite-dropping fireballs shows several periods of increased activity in the course of the year. The analysis of the atmospheric trajectories and physical properties of sporadic meteorite-dropping fireballs observed in Tajikistan by instrumental methods in the summer‒autumn periods of increased fireballs activity has been made. As a result the structural strength, the bulk density and terminal mass of the studied fireballs that can survive in the Earth atmosphere and became meteorites was obtained. From the photographic IAU MDC_2003 meteor database and published sources based on the orbit proximity as determined by D-criterion of Southworth and Hawkins the fireballs that could be the members of group of meteorite-dropping fireballs, was found. Among the near Earth's objects (NEOs) the searching for parent bodies for meteorite-dropping fireballs was made and the evolution of orbits of these objects in the past on a long interval of time was investigated.

  19. radionuclides modelling dispersion of in the atmosphere for continuous discharges and accidental

    International Nuclear Information System (INIS)

    Teyeb, Malika

    2011-01-01

    The study of the dispersion of radionuclides in the atmosphere is the subject of a physical and numerical modeling of the phenomenon of dispersion. This work aims to study the atmospheric dispersion of accidental releases and continuous, from the possible establishment of a nuclear pressurized water reactor in the potential in Bizerte and Skhira.

  20. The effect of dropping impact on bruising pomegranate fruit

    Directory of Open Access Journals (Sweden)

    M Mohammad Shafie

    2016-04-01

    Full Text Available Introduction: The pomegranate journey from orchard to supermarket is very complex and pomegranates are subjected to the variety of static and dynamic loads that could result in this damage and bruise occurring. Bruise area and bruise volume are the most important parameters to evaluate fruit damage occurred in harvest and postharvest stages. The bruising is defined as damage to fruit flesh usually with no abrasion of the peel. The two different types of dynamic loading which can physically cause fruit bruising are impact and vibration. The impact and vibration loadings may occur during picking or sorting as the pomegranates are dropped into storage bins and during transportation. The focus of this work was on the impact loading as this appeared to be the most prevalent. In view of the limitations of conventional testing methods (ASTM D3332 Standard Test Methods for Mechanical Shock Fragility of Products, the method and procedure for determining dropping bruise boundary of fruit were also established by adapting free-fall dropping tests. Materials and Methods: After the ‘Malas-e-Saveh’ pomegranates had been selected, they were numbered, and the weight and dimension of each sample were measured and recorded. Firmness in cheek region of each fruit was also measured. Fruit firmness was determined by measuring the maximum force during perforating the sample to a depth of 10 mm at a velocity of 100 mm min-1 with an 8 mm diameter cylindrical penetrometer mounted onto a STM-5 Universal Testing Machine (SANTAM, Design CO. LTD., England. Free-fall dropping tests with a series of drop heights (6, 7, 10, 15, 30 and 60 cm were conducted on fresh ‘Malas-e-Saveh’ pomegranates. Three samples were used for each dropping height, and each sample was subjected to impact on two different positions. Before the test was started, it was necessary to control the sample's drop position. The cheek of sample was placed on the fruit holder. An aluminum plate mounted

  1. Liquid toroidal drop under uniform electric field

    Science.gov (United States)

    Zabarankin, Michael

    2017-06-01

    The problem of a stationary liquid toroidal drop freely suspended in another fluid and subjected to an electric field uniform at infinity is addressed analytically. Taylor's discriminating function implies that, when the phases have equal viscosities and are assumed to be slightly conducting (leaky dielectrics), a spherical drop is stationary when Q=(2R2+3R+2)/(7R2), where R and Q are ratios of the phases' electric conductivities and dielectric constants, respectively. This condition holds for any electric capillary number, CaE, that defines the ratio of electric stress to surface tension. Pairam and Fernández-Nieves showed experimentally that, in the absence of external forces (CaE=0), a toroidal drop shrinks towards its centre, and, consequently, the drop can be stationary only for some CaE>0. This work finds Q and CaE such that, under the presence of an electric field and with equal viscosities of the phases, a toroidal drop having major radius ρ and volume 4π/3 is qualitatively stationary-the normal velocity of the drop's interface is minute and the interface coincides visually with a streamline. The found Q and CaE depend on R and ρ, and for large ρ, e.g. ρ≥3, they have simple approximations: Q˜(R2+R+1)/(3R2) and CaE∼3 √{3 π ρ / 2 } (6 ln ⁡ρ +2 ln ⁡[96 π ]-9 )/ (12 ln ⁡ρ +4 ln ⁡[96 π ]-17 ) (R+1 ) 2/ (R-1 ) 2.

  2. Accidental pollution in the ocean: besides crude oil, chemicals and other spills

    International Nuclear Information System (INIS)

    Marchand, M.

    2003-01-01

    Accidental pollution of the seas is usually illustrated by the shipwreck of tankers carrying crude oil. We must look beyond this image since such accidents spill substances other than petrochemicals. We need but mention the Levoli Sun's accident near the Cotentin peninsula, France, one year after the Erika went down. And what about spills of agricultural and food products? An accidental spill as apparently harmless as wheat might have serious effects on not just the environment but also human health. In all cases, two major series of questions crop up: 1) Is it necessary to intervene? If so, are we able to? And if we can, how to fight against spills? 2) What are the short- and long-term effects on the environment and on all human activities related to the sea (fishing, fish-farming, salt production, tourism, salt-water cures, etc.)? These two questions have a common denominator: the need to know how spilled products react. This knowledge conditions both the operational response for fighting against pollution and the assessment of the impact on the maritime environment. (author)

  3. Accidental phosgene gas exposure: A review with background study of 10 cases

    Directory of Open Access Journals (Sweden)

    Arvind Kumar Vaish

    2013-01-01

    Full Text Available Here, authors present a review on clinical presentation and management of exposure of phosgene gas after reviewing the literature by searching with keywords phosgene exposure on Google, Cochrane, Embase and PubMed with a background of experience gained from 10 patients who were admitted to our institute after an accidental phosgene exposure in February 2011 nearby a city in India. Phosgene is a highly toxic gas, occupational workers may have accidental exposure. The gas can also be generated inadvertently during fire involving plastics and other chemicals and solvents containing chlorine, which is of concern to emergency responders. Phosgene inhalation may cause initially symptoms of respiratory tract irritation, patients feel fine thereafter, and then die of choking a day later because of build up of fluid in the lungs (delayed onset non-cardiogenic pulmonary edema. Phosgene exposure is associated with significant morbidity and mortality. Patients with a history of exposure should be admitted to the hospital for a minimum of 24 h for observation because of the potential for delayed onset respiratory failure and acute respiratory distress syndrome.

  4. 9 m side drop test of scale model

    International Nuclear Information System (INIS)

    Ku, Jeong-Hoe; Chung, Seong-Hwan; Lee, Ju-Chan; Seo, Ki-Seog

    1993-01-01

    A type B(U) shipping cask had been developed in KAERI for transporting PWR spent fuel. Since the cask is to transport spent PWR fuel, it must be designed to meet all of the structural requirements specified in domestic packaging regulations and IAEA safety series No.6. This paper describes the side drop testing of a one - third scale model cask. The crush and deformations of the shock absorbing covers directly control the deceleration experiences of the cask during the 9 m side drop impact. The shock absorbing covers greatly mitigated the inertia forces of the cask body due to the side drop impact. Compared with the side drop test and finite element analysis, it was verified that the 1/3 scale model cask maintain its structural integrity of the model cask under the side drop impact. The test and analysis results could be used as the basic data to evaluate the structural integrity of the real cask. (J.P.N.)

  5. Rapid determination of caffeine in one drop of beverages and foods using drop-to-drop solvent microextraction with gas chromatography/mass spectrometry.

    Science.gov (United States)

    Shrivas, Kamlesh; Wu, Hui-Fen

    2007-11-02

    A simple and rapid sample cleanup and preconcentration method for the quantitative determination of caffeine in one drop of beverages and foods by gas chromatography/mass spectrometry (GC/MS) has been proposed using drop-to-drop solvent microextraction (DDSME). The best optimum experimental conditions for DDSME were: chloroform as the extraction solvent, 5 min extraction time, 0.5 microL exposure volume of the extraction phase and no salt addition at room temperature. The optimized methodology exhibited good linearity between 0.05 and 5.0 microg/mL with correlation coefficient of 0.980. The relative standard deviation (RSD) and limits of detection (LOD) of the DDSME/GC/MS method were 4.4% and 4.0 ng/mL, respectively. Relative recovery of caffeine in beverages and foods were found to be 96.6-101%, which showing good reliability of this method. This DDSME excludes the major disadvantages of conventional method of caffeine extraction, like large amount of organic solvent and sample consumption and long sample pre-treatment process. So, this approach proves that the DDSME/GC/MS technique can be applied as a simple, fast and feasible diagnosis tool for environmental, food and biological application for extremely small amount of real sample analysis.

  6. The world in scenarios

    International Nuclear Information System (INIS)

    De Jong, A.; Roodenburg, H.

    1992-01-01

    As an introduction to this special issue 'Worlds of difference: Scenarios's for the economy, energy and the environment 1990-2015', an outline is given of the future of the world and the Netherlands, based on four scenarios. These scenarios are published in 'Scanning the future' in May 1992 by the CPB, the Dutch Central Planning Bureau. The Global Shift (GS) scenario is characterized by a very dynamic technological development, the free market perspective, strong economic growth in the Asian economies, and a relative economic regression in Western Europe. In the European Renaissance (ER) scenario the technological development is less dynamic and more gradual than in the GS scenario. The Balanced Growth (BG) scenario is dominated by a sustainable economic development and a strong technological dynamic development. The Global Crisis (GC) scenario shows a downward spiral in many areas, stagnating developments and fragile economies as results of the trends in the eighties. The first three scenarios are elaborated for the Netherlands. Also attention is paid to the aims and meaning of long-term scenarios. 2 figs., 2 tabs., 3 refs

  7. Air-drop blood supply in the French Army.

    Science.gov (United States)

    Javaudin, Olivier; Baillon, A; Varin, N; Martinaud, C; Pouget, T; Civadier, C; Clavier, B; Sailliol, A

    2018-02-12

    Haemorrhagic shock remains the leading cause of preventable death in overseas and austere settings. Transfusion of blood components is critical in the management of this kind of injury. For French naval and ground military units, this supply often takes too long considering the short shelf-life of red blood cell concentrates (RBCs) and the limited duration of transport in cooling containers (five to six days). Air-drop supply could be an alternative to overcome these difficulties on the condition that air-drop does not cause damage to blood units. After a period of study and technical development of packaging, four air-drops at medium and high altitudes were performed with an aircraft of the French Air Force. After this, one air-drop was carried out at medium altitude with 10 RBCs and 10 French lyophilised plasma (FLYP). A second air-drop was performed with a soldier carrying one FLYP unit at 12 000 feet. For these air-drops real blood products were used, and quality control testing and temperature monitoring were performed. The temperatures inside the containers were within the normal ranges. Visual inspection indicated that transfusion packaging and dumped products did not undergo deterioration. The quality control data on RBCs and FLYP, including haemostasis, suggested no difference before and after air-drop. The operational implementation of the air-drop of blood products seems to be one of the solutions for the supply of blood products in military austere settings or far forward on battlefield, allowing safe and early transfusion. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  8. Nectar and pollination drops: how different are they?

    Science.gov (United States)

    Nepi, Massimo; von Aderkas, Patrick; Wagner, Rebecca; Mugnaini, Serena; Coulter, Andrea; Pacini, Ettore

    2009-08-01

    Pollination drops and nectars (floral nectars) are secretions related to plant reproduction. The pollination drop is the landing site for the majority of gymnosperm pollen, whereas nectar of angiosperm flowers represents a common nutritional resource for a large variety of pollinators. Extrafloral nectars also are known from all vascular plants, although among the gymnosperms they are restricted to the Gnetales. Extrafloral nectars are not generally involved in reproduction but serve as 'reward' for ants defending plants against herbivores (indirect defence). Although very different in their task, nectars and pollination drops share some features, e.g. basic chemical composition and eventual consumption by animals. This has led some authors to call these secretions collectively nectar. Modern techniques that permit chemical analysis and protein characterization have very recently added important information about these sugary secretions that appear to be much more than a 'reward' for pollinating (floral nectar) and defending animals (extrafloral nectar) or a landing site for pollen (pollination drop). Nectar and pollination drops contain sugars as the main components, but the total concentration and the relative proportions are different. They also contain amino acids, of which proline is frequently the most abundant. Proteomic studies have revealed the presence of common functional classes of proteins such as invertases and defence-related proteins in nectar (floral and extrafloral) and pollination drops. Invertases allow for dynamic rearrangement of sugar composition following secretion. Defence-related proteins provide protection from invasion by fungi and bacteria. Currently, only few species have been studied in any depth. The chemical composition of the pollination drop must be investigated in a larger number of species if eventual phylogenetic relationships are to be revealed. Much more information can be provided from further proteomic studies of both

  9. Radiological accidents in medical practice

    International Nuclear Information System (INIS)

    Cardenas Herrera, Juan

    2012-01-01

    Different radiological accidents that may occur in medical practice are shown. The following topics are focused: accident statistics for medical exposure, accidental medical exposures, radiotherapy accidents and potential accidental scenarios [es

  10. Controlling Vapor Pressure In Hanging-Drop Crystallization

    Science.gov (United States)

    Carter, Daniel C.; Smith, Robbie

    1988-01-01

    Rate of evaporation adjusted to produce larger crystals. Device helps to control vapor pressure of water and other solvents in vicinity of hanging drop of solution containing dissolved enzyme protein. Well of porous frit (sintered glass) holds solution in proximity to drop of solution containing protein or enzyme. Vapor from solution in frit controls evaporation of solvent from drop to control precipitation of protein or enzyme. With device, rate of nucleation limited to decrease number and increase size (and perhaps quality) of crystals - large crystals of higher quality needed for x-ray diffraction studies of macromolecules.

  11. Application of Proteomics to the Study of Pollination Drops

    Directory of Open Access Journals (Sweden)

    Natalie Prior

    2013-04-01

    Full Text Available Premise of the study: Pollination drops are a formative component in gymnosperm pollen-ovule interactions. Proteomics offers a direct method for the discovery of proteins associated with this early stage of sexual reproduction. Methods: Pollination drops were sampled from eight gymnosperm species: Chamaecyparis lawsoniana (Port Orford cedar, Ephedra monosperma, Ginkgo biloba, Juniperus oxycedrus (prickly juniper, Larix ×marschlinsii, Pseudotsuga menziesii (Douglas-fir, Taxus ×media, and Welwitschia mirabilis. Drops were collected by micropipette using techniques focused on preventing sample contamination. Drop proteins were separated using both gel and gel-free methods. Tandem mass spectrometric methods were used including a triple quadrupole and an Orbitrap. Results: Proteins are present in all pollination drops. Consistency in the protein complement over time was shown in L. ×marschlinsii. Representative mass spectra from W. mirabilis chitinase peptide and E. monosperma serine carboxypeptidase peptide demonstrated high quality results. We provide a summary of gymnosperm pollination drop proteins that have been discovered to date via proteomics. Discussion: Using proteomic methods, a dozen classes of proteins have been identified to date. Proteomics presents a way forward in deepening our understanding of the biological function of pollination drops.

  12. Cavity optomechanics in a levitated helium drop

    Science.gov (United States)

    Childress, L.; Schmidt, M. P.; Kashkanova, A. D.; Brown, C. D.; Harris, G. I.; Aiello, A.; Marquardt, F.; Harris, J. G. E.

    2017-12-01

    We describe a proposal for a type of optomechanical system based on a drop of liquid helium that is magnetically levitated in vacuum. In the proposed device, the drop would serve three roles: its optical whispering-gallery modes would provide the optical cavity, its surface vibrations would constitute the mechanical element, and evaporation of He atoms from its surface would provide continuous refrigeration. We analyze the feasibility of such a system in light of previous experimental demonstrations of its essential components: magnetic levitation of mm-scale and cm-scale drops of liquid He , evaporative cooling of He droplets in vacuum, and coupling to high-quality optical whispering-gallery modes in a wide range of liquids. We find that the combination of these features could result in a device that approaches the single-photon strong-coupling regime, due to the high optical quality factors attainable at low temperatures. Moreover, the system offers a unique opportunity to use optical techniques to study the motion of a superfluid that is freely levitating in vacuum (in the case of 4He). Alternatively, for a normal fluid drop of 3He, we propose to exploit the coupling between the drop's rotations and vibrations to perform quantum nondemolition measurements of angular momentum.

  13. Fibroelastoma valvular aórtico como causa de accidente cerebrovascular embólico: Reporte de un caso

    OpenAIRE

    BAHAMONDES S,JUAN CARLOS; MERIÑO S,GUSTAVO; SALMAN A,JUAN; SILVA V,ABELARDO; MORA M,JAVIER

    2008-01-01

    Los tumores cardíacos son una causa rara de accidente cerebrovascular embólico. Comunicamos el caso de una paciente de 65 años quien debuta su historia con un accidente cerebrovascular. El estudio de fuente embólica con ecocardiografía transesofágica demostró un fibroelastoma de la válvula aórtica en el borde libre del velo no coronariano. El tumor fue extraído mediante circulación extracorpórea. El estudio anatomopatológico confirmó el diagnóstico y la paciente se encuentra en capacidad func...

  14. Accidentes en los niños, un problema de salud actual: Revisión bibliográfica

    OpenAIRE

    Valdés Pacheco, Everardo; Ferrer Liranza, Nancy; Ferrer Liranza, Amed

    1996-01-01

    Se realiza una revisión bibliográfica sobre el tema Accidente, especialmente en los niños, y se resalta la importancia de la prevención de éstos, pues constituyen la primera causa de muerte en nuestro país en los menores entre 1 y 14 años de edad. Se brinda información sobre los tipos y causas principales de accidentes en estas edades, así como las recomendaciones para la labor preventiva del equipo de salud en la atención primaria.A bibliographic review on the topic of accidents, specially i...

  15. Self-excited hydrothermal waves in evaporating sessile drops

    Science.gov (United States)

    Sefiane, K.; Moffat, J. R.; Matar, O. K.; Craster, R. V.

    2008-08-01

    Pattern formation driven by the spontaneous evaporation of sessile drops of methanol, ethanol, and FC-72 using infrared thermography is observed and, in certain cases, interpreted in terms of hydrothermal waves. Both methanol and ethanol drops exhibit thermal wave trains, whose wave number depends strongly on the liquid volatililty and substrate thermal conductivity. The FC-72 drops develop cellular structures whose size is proportional to the local thickness. Prior to this work, hydrothermal waves have been observed in the absence of evaporation in shallow liquid layers subjected to an imposed temperature gradient. In contrast, here both the temperature gradients and the drop thickness vary spatially and temporally and are a natural consequence of the evaporation process.

  16. Critical experiments simulating accidental water immersion of highly enriched uranium dioxide fuel elements

    International Nuclear Information System (INIS)

    Ponomarev-Stepnoi, N.N.; Glushkov, L.S.

    2003-01-01

    The paper focuses on experimental analysis of nuclear criticality safety at accidental water immersion of fuel elements of the Russian TOPAZ-2 space nuclear power system reactor. The structure of water-moderated heterogeneous critical assemblies at the NARCISS facility is described in detail, including sizes, compositions, densities of materials of the main assembly components for various core configurations. Critical parameters of the assemblies measured for varying number of fuel elements, height of fuel material in fuel elements and their arrangement in the water moderator with a uniform or variable spacing are presented. It has been found from the experiments that at accidental water immersion of fuel elements involved, the minimum critical mass equal to approximately 20 kg of uranium dioxide is achieved at 31-37 fuel elements. The paper gives an example of a physical model of the water-moderated heterogeneous critical assembly with a detailed characterization of its main components that can be used for calculations using different neutronic codes, including Monte Carlo ones. (author)

  17. Drop Impact on Textile Material: Effect of Fabric Properties

    Directory of Open Access Journals (Sweden)

    Romdhani Zouhaier

    2014-09-01

    Full Text Available This paper presents an experimental study of impact of water drop on a surface in a spreading regime with no splashing. Three surfaces were studied: virgin glass, coating film and woven cotton fabric at different construction parameters. All experiments were carried out using water drop with the same free fall high. Digidrop with high-resolution camera is used to measure the different parameters characterising this phenomenon. Results show an important effect of the height of the free fall on the drop profile and the spreading behaviour. An important drop deformation at the surface impact was observed. Then, fabric construction as the weft count deeply affects the drop impact. For plain weave, an increase of weft count causes a decrease in penetration and increase in the spreading rate. The same result was obtained for coated fabric. Therefore, the impact energy was modified and the drop shape was affected, which directly influenced the spreading rate.

  18. A study of fungi on droppings of certain birds

    Directory of Open Access Journals (Sweden)

    C. S. Singh

    2014-08-01

    Full Text Available Droppings of fowl, owl, parrot, pigeon and sparrow were asepticaly collected in sterilized bottles from different places at Gorakhpur, 54 fungi were isolated. The number of fungi was more in the pigeon showing considerable decrease in the fowl and the sparrow. In the parrot and the owl, however. the fungi were egual in number. The number of Phycomycetes was almost the same on droppings of all birds, from parrot only one species could be isolated. A larger number of Ascomyteces was recorded from fowl, less from pigeon and owl and the least (two each on sparrow and parrot droppings. The Basidiomycetes, represented by two species only, were recorded on owl and pigeon droppings. Pigeon droppings yielded the largest number of Deuteromycetes. They were egual in numbers on owl and parrot while on fowl and sparrow their number was comparatively less. Mycelia sterilia, though poor in their numbers, were recorded on all the bird droppings excepting owl.

  19. Afterlife of a Drop Impacting a Liquid Pool

    Science.gov (United States)

    Saha, Abhishek; Wei, Yanju; Tang, Xiaoyu; Law, Chung K.

    2017-11-01

    Drop impact on liquid pool is ubiquitous in industrial processes, such as inkjet printing and spray coating. While merging of drop with the impacted liquid surface is essential to facilitate the printing and coating processes, it is the afterlife of this merged drop and associated mixing which control the quality of the printed or coated surface. In this talk we will report an experimental study on the structural evolution of the merged droplet inside the liquid pool. First, we will analyze the depth of the crater created on the pool surface by the impacted drop for a range of impact inertia, and we will derive a scaling relation and the associated characteristic time-scale. Next, we will focus on the toroidal vortex formed by the moving drop inside the liquid pool and assess the characteristic time and length scales of the penetration process. The geometry of the vortex structure which qualitatively indicates the degree of mixedness will also be discussed. Finally, we will present the results from experiments with various viscosities to demonstrate the role of viscous dissipation on the geometry and structure formed by the drop. This work is supported by the Army Research Office and the Xerox Corporation.

  20. Drop shape visualization and contact angle measurement on curved surfaces.

    Science.gov (United States)

    Guilizzoni, Manfredo

    2011-12-01

    The shape and contact angles of drops on curved surfaces is experimentally investigated. Image processing, spline fitting and numerical integration are used to extract the drop contour in a number of cross-sections. The three-dimensional surfaces which describe the surface-air and drop-air interfaces can be visualized and a simple procedure to determine the equilibrium contact angle starting from measurements on curved surfaces is proposed. Contact angles on flat surfaces serve as a reference term and a procedure to measure them is proposed. Such procedure is not as accurate as the axisymmetric drop shape analysis algorithms, but it has the advantage of requiring only a side view of the drop-surface couple and no further information. It can therefore be used also for fluids with unknown surface tension and there is no need to measure the drop volume. Examples of application of the proposed techniques for distilled water drops on gemstones confirm that they can be useful for drop shape analysis and contact angle measurement on three-dimensional sculptured surfaces. Copyright © 2011 Elsevier Inc. All rights reserved.

  1. Perfil epidemiológico de la discapacidad por accidentes de tránsito en el Perú, 2012

    Directory of Open Access Journals (Sweden)

    César Gutiérrez

    Full Text Available Objetivos. Describir el perfil epidemiológico de las personas discapacitadas por accidentes de tránsito (AT en Perú. Materiales y métodos. Análisis secundario de la Encuesta Nacional Especializada Sobre Discapacidad (ENEDIS del año 2012. Además, se realizó un análisis ecológico con los registros de AT del Ministerio de Transportes y Comunicaciones. Resultados. 49 036 personas reportaron algún tipo de discapacidad por accidentes de tránsito (DAT; 81,3% de los discapacitados reside en zonas urbanas. La discapacidad reportada más frecuente fue limitación en la locomoción y destreza (77,4%, seguida de la discapacidad visual (22,9%. Se reporta dependencia en 44,7% de las personas con discapacidad. Las regiones con mayor prevalencia de AT presentan mayor prevalencia de discapacidad por accidente de tránsito (Coeficiente de Spearman: 0,426, p=0,034. Conclusiones. La mayor parte de los discapacitados por AT proceden de la zona urbana, son varones y se encuentran en la edad económicamente productiva. La forma más común de limitación es la de locomoción. Gran parte de los afectados no reciben ningún tipo de rehabilitación, lo que acentúa la inequidad en salud relacionada a los accidentes de tránsito

  2. The quest for an intermediate-scale accidental axion and further ALPs

    International Nuclear Information System (INIS)

    Dias, A.G.; Nishi, C.C.; Machado, A.C.B.; Vaudrevange, P.

    2014-03-01

    The recent detection of the cosmic microwave background polarimeter experiment BICEP2 of tensor fluctuations in the B-mode power spectrum basically excludes all plausible axion models where its decay constant is above 10 13 GeV. Moreover, there are strong theoretical, astrophysical, and cosmological motivations for models involving, in addition to the axion, also axion-like particles (ALPs), with decay constants in the intermediate scale range, between 10 9 GeV and 10 13 GeV. Here, we present a general analysis of models with an axion and further ALPs and derive bounds on the relative size of the axion and ALP photon (and electron) coupling. We discuss what we can learn from measurements of the axion and ALP photon couplings about the fundamental parameters of the underlying ultraviolet completion of the theory. For the latter we consider extensions of the Standard Model in which the axion and the ALP(s) appear as pseudo Nambu-Goldstone bosons from the breaking of global chiral U(1) (Peccei-Quinn (PQ)) symmetries, occuring accidentally as low energy remnants from exact discrete symmetries. In such models, the axion and the further ALP are protected from disastrous explicit symmetry breaking effects due to Planck-scale suppressed operators. The scenarios considered exploit heavy right handed neutrinos getting their mass via PQ symmetry breaking and thus explain the small mass of the active neutrinos via a seesaw relation between the electroweak and an intermediate PQ symmetry breaking scale. We show some models that can accommodate simultaneously an axion dark matter candidate, an ALP explaining the anomalous transparency of the universe for γ-rays, and an ALP explaining the recently reported 3.55 keV gamma line from galaxies and clusters of galaxies, if the respective decay constants are of intermediate scale.

  3. The quest for an intermediate-scale accidental axion and further ALPs

    Energy Technology Data Exchange (ETDEWEB)

    Dias, A.G.; Nishi, C.C. [Univ. Federal do ABC - UFABC, Sao Paulo (Brazil); Machado, A.C.B. [Teorica-Univ. Estadual Paulista, Sao Paulo (Brazil). Instituto de Fisica; Ringwald, A. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Vaudrevange, P. [Technische Univ. Muenchen, Garching (Germany). Excellence Cluster Universe

    2014-03-15

    The recent detection of the cosmic microwave background polarimeter experiment BICEP2 of tensor fluctuations in the B-mode power spectrum basically excludes all plausible axion models where its decay constant is above 10{sup 13} GeV. Moreover, there are strong theoretical, astrophysical, and cosmological motivations for models involving, in addition to the axion, also axion-like particles (ALPs), with decay constants in the intermediate scale range, between 10{sup 9} GeV and 10{sup 13} GeV. Here, we present a general analysis of models with an axion and further ALPs and derive bounds on the relative size of the axion and ALP photon (and electron) coupling. We discuss what we can learn from measurements of the axion and ALP photon couplings about the fundamental parameters of the underlying ultraviolet completion of the theory. For the latter we consider extensions of the Standard Model in which the axion and the ALP(s) appear as pseudo Nambu-Goldstone bosons from the breaking of global chiral U(1) (Peccei-Quinn (PQ)) symmetries, occuring accidentally as low energy remnants from exact discrete symmetries. In such models, the axion and the further ALP are protected from disastrous explicit symmetry breaking effects due to Planck-scale suppressed operators. The scenarios considered exploit heavy right handed neutrinos getting their mass via PQ symmetry breaking and thus explain the small mass of the active neutrinos via a seesaw relation between the electroweak and an intermediate PQ symmetry breaking scale. We show some models that can accommodate simultaneously an axion dark matter candidate, an ALP explaining the anomalous transparency of the universe for γ-rays, and an ALP explaining the recently reported 3.55 keV gamma line from galaxies and clusters of galaxies, if the respective decay constants are of intermediate scale.

  4. Device for making liquid drops

    International Nuclear Information System (INIS)

    Yamada, Masao; Fukuda, Fumito; Nishikawa, Masana; Ishii, Takeshi.

    1976-01-01

    Object: To provide a device for producing liquid drops in the form of liquefied gases indispensable to make deuterium and tritium ice pellets used as a fusion fuel in a tokamak type fusion reactor. Structure: First, pressure P 1 at the upper surface of liquefied gas in a container and outlet pressure P 2 of a nozzle disposed at the lower part of the container are adjusted into the state of P 1 >= P 2 , and it is preset so that even under such conditions, the liquefied gas from the nozzle is not naturally flown out. Next, a vibration plate disposed within the container is rapidly downwardly advanced toward the nozzle through a predetermined distance. As a result, pressure of the liquefied gas within a depression under the vibration plate rises instantaneously or in a pulse fashion to dissatisfy the aforesaid set condition whereby the liquefied gas may be flown out from the nozzle in the form of liquid drops. In accordance with the present device, it is possible to produce a suitable number of drops at a suitable point. (Yoshihara, H.)

  5. The accidental city : violence, economy and humanitarianism in Kakuma refugee camp Kenya

    NARCIS (Netherlands)

    Jansen, B.J.

    2011-01-01

    In this research I examine social ordering processes in Kakuma refugee camp in

    Kenya. I view the camp as an accidental city, by which I challenge the image of

    the camp as a temporary and artificial waiting space or a protracted refugee crisis

    per se. The reference to the

  6. Vertical vibration dynamics of acoustically levitated drop containing two immiscible liquids

    Science.gov (United States)

    Zang, Duyang; Zhai, Zhicong; Li, Lin; Lin, Kejun; Li, Xiaoguang; Geng, Xingguo

    2016-09-01

    We have studied the levitation and oscillation dynamics of complex drops containing two immiscible liquids. Two types of drops, core-shell drop and abnormal-shaped drop, have been obtained depending on the levitation procedures. The oscillation dynamics of the drops have been studied using a high speed camera. It has been found that the oscillation of the abnormal-shaped drop has a longer oscillation period and decays much faster than that of the core-shell drop, which cannot be accounted for by the air resistance itself. The acoustic streaming induced by ultrasound may bring an additional force against the motion of the drop due to the Bernoulli effect. This is responsible for the enhanced damping during the oscillation in acoustic levitation.

  7. Self-excited hydrothermal waves in evaporating sessile drops

    OpenAIRE

    Sefiane K.; Moffat J.R.; Matar O.K.; Craster R.V.

    2008-01-01

    Pattern formation driven by the spontaneous evaporation of sessile drops of methanol, ethanol, and FC-72 using infrared thermography is observed and, in certain cases, interpreted in terms of hydrothermal waves. Both methanol and ethanol drops exhibit thermal wave trains, whose wave number depends strongly on the liquid volatililty and substrate thermal conductivity. The FC- 72 drops develop cellular structures whose size is proportional to the local thickness. Prior to this work, hydrotherma...

  8. Si pudiese volver no cambiaría ese día: el relato de una joven tras sufrir un accidente de tráfico

    Directory of Open Access Journals (Sweden)

    Celia Martí García

    Full Text Available Los accidentes de tráfico son causa de un porcentaje bastante elevado de muertes en los países occidentalizados. Si hablamos de accidentes de moto, los factores de riesgo para que la persona sufra daños mayores se ven multiplicados, sobre todo si tenemos en cuenta lo desprotegida que va la víctima y las velocidades a las que se suelen producir este tipo de accidentes. La informante de este relato nos contará la vivencia que supuso para ella sufrir un accidente en motocicleta cuando tenía 15 años, las intervenciones quirúrgicas a las que tuvo que someterse, y su reincorporación académica. En definitiva, cómo le ha influido en su vida y qué secuelas le ha dejado su exceso de velocidad.

  9. Drop tests of the Three Mile Island knockout canister

    International Nuclear Information System (INIS)

    Box, W.D.; Aaron, W.S.; Shappert, L.B.; Childress, P.C.; Quinn, G.J.; Smith, J.V.

    1987-01-01

    A type of Three Mile Island Unit 2 (TMI-2) defueling canister, called a ''knockout'' canister, was subjected to a series of drop tests at the Oak Ridge National Laboratory's Drop Test Facility. These tests confirmed the structural integrity of internal fixed neutron poisons in support of a request for NRC licensing of this type of canister for the shipment of TMI-2 reactor fuel debris to the Idaho National Engineering Laboratory (INEL) for the Core Examination R and D Program. This report presents the data generated and the results obtained from a series of four drop tests that included two drops with the test assembly in the vertical position and two drops with the assembly in the horizontal position

  10. Development of management tools for accidental radiological contamination of the French coastal areas - Development of management tools for accidental radiological contamination in the French marine coastal areas

    Energy Technology Data Exchange (ETDEWEB)

    Duffa, C.; Charmasson, S. [IRSN/PRP-ENV/SESURE/LERCM - Antenne de Radioecologie Marine, Centre Ifremer, Zone portuaire de Bregaillon, 13507 La Seyne sur Mer (France); Bailly du Bois, P.; Fievet, B. [IRSN/PRP-ENV/SERIS/LRC (France); Couvez, C.; Renaud, P. [IRSN/PRP-ENV/SESURE/DIR (France); Didier, D. [IRSN/PRP-CRI/SESUC/BMTA (France)

    2014-07-01

    The Fukushima nuclear accident led to the most important accidental release of artificial radionuclides into the sea. This accident has underlined the importance of being able to adequately reproduce the fate of radioactive releases and to estimate their consequences for the marine environment. For its Crisis Centre, the French Institute for Radioprotection and Nuclear Safety (IRSN) has operational tools, in order to help experts and decision makers in case of any atmospheric accidental release and terrestrial environment contamination. The on-going project aims to develop tools to manage any marine contamination of the French coastal areas. We should be able to evaluate and anticipate the marine post-accidental situation: contaminated areas localization and contamination levels, and possible consequences. Many sites has be considered as potential source terms into the sea: the Coastal Nuclear Power Plants, the La Hague reprocessing Plant, the Brest and Toulon Military Harbours as home-ports of nuclear powered vessels, and different river mouths (Rhone River, Gironde, Loire, Seine) that could be contaminated by upstream accidental release. To achieve this goal, two complementary approaches are developed: Marine sheets and a dedicated modelling tool (STERNE). - Marine sheets aim to summarize marine environment characteristics for the different sites, identify potential stakes for human protection such as aquaculture areas, beaches, or industrial water intakes, and ecological stakes. Whenever possible, a local climatology (main currents depending on meteorological or tide conditions) that could be a support to first environmental measurement strategy is proposed. A list of available local contacts for any operational management is also provided. - The modelling tool, STERNE (Simulation du Transport et du transfert d'Elements Radioactifs dans l'environNEment marin), must predict radionuclide dispersion and contamination of water, marine species and sediments

  11. Scenarios and analytical methods for UF6 releases at NRC-licensed fuel cycle facilities

    International Nuclear Information System (INIS)

    Siman-Tov, M.; Dykstra, J.; Holt, D.D.; Huxtable, W.P.; Just, R.A.; Williams, W.R.

    1984-06-01

    This report identifies and discusses potential scenarios for the accidental release of UF 6 at NRC-licensed UF 6 production and fuel fabrication facilities based on a literature review, site visits, and DOE enrichment plant experience. Analytical tools needed for evaluating source terms for such releases are discussed, and the applicability of existing methods is reviewed. Accident scenarios are discussed under the broad headings of cylinder failures, UF 6 process system failures, nuclear criticality events, and operator errors and are categorized by location, release source, phase of UF 6 prior to release, release flow characteristics, release causes, initiating events, and UF 6 inventory at risk. At least three types of releases are identified for further examination: (1) a release from a liquid-filled cylinder outdoors, (2) a release from a pigtail or cylinder in a steam chest, (3) an indoor release from either (a) a pigtail or liquid-filled cylinder or (b) other indoor source depending on facility design and operating procedures. Indoor release phenomena may be analyzed to determine input terms for a ventilation model by using a time-dependent homogeneous compartment model or a more complex hydrodynamic model if time-dependent, spatial variations in concentrations, temperature, and pressure are important. Analytical tools for modeling directed jets and explosive releases are discussed as well as some of the complex phenomena to be considered in analyzing UF 6 releases both indoors and outdoors

  12. Vertical vibration and shape oscillation of acoustically levitated water drops

    International Nuclear Information System (INIS)

    Geng, D. L.; Xie, W. J.; Yan, N.; Wei, B.

    2014-01-01

    We present the vertical harmonic vibration of levitated water drops within ultrasound field. The restoring force to maintain such a vibration mode is provided by the resultant force of acoustic radiation force and drop gravity. Experiments reveal that the vibration frequency increases with the aspect ratio for drops with the same volume, which agrees with the theoretical prediction for those cases of nearly equiaxed drops. During the vertical vibration, the floating drops undergo the second order shape oscillation. The shape oscillation frequency is determined to be twice the vibration frequency.

  13. Vertical vibration and shape oscillation of acoustically levitated water drops

    Energy Technology Data Exchange (ETDEWEB)

    Geng, D. L.; Xie, W. J.; Yan, N.; Wei, B., E-mail: bbwei@nwpu.edu.cn [Department of Applied Physics, Northwestern Polytechnical University, Xi' an 710072 (China)

    2014-09-08

    We present the vertical harmonic vibration of levitated water drops within ultrasound field. The restoring force to maintain such a vibration mode is provided by the resultant force of acoustic radiation force and drop gravity. Experiments reveal that the vibration frequency increases with the aspect ratio for drops with the same volume, which agrees with the theoretical prediction for those cases of nearly equiaxed drops. During the vertical vibration, the floating drops undergo the second order shape oscillation. The shape oscillation frequency is determined to be twice the vibration frequency.

  14. Fact Sheet: Clean Air Act Section 112(r): Accidental Release Prevention / Risk Management Plan Rule

    Science.gov (United States)

    EPA is required to publish regulations and guidance for chemical accident prevention at facilities that pose the greatest risk of harm from accidental releases of regulated flammable and toxic substances above threshold quantities.

  15. Surfactant-Enhanced Benard Convection on an Evaporating Drop

    Science.gov (United States)

    Nguyen, Van X.; Stebe, Kathleen J.

    2001-11-01

    Surfactant effects on an evaporating drop are studied experimentally. Using a fluorescent probe, the distribution and surface phase of the surfactant is directly imaged throughout the evaporation process. From these experiments, we identify conditions in which surfactants promote surface tension-driven Benard instabilities in aqueous systems. The drops under study contain finely divided particles, which act as tracers in the flow, and form well-defined patterns after the drop evaporates. Two flow fields have been reported in this system. The first occurs because the contact line becomes pinned by solid particles at the contact line region. In order for the contact line to remain fixed, an outward flow toward the ring results, driving further accumulation at the contact ring. A ‘coffee ring’ of particles is left as residue after the drop evaporates[1]. The second flow is Benard convection, driven by surface tension gradients on the drop[2,3]. In our experiments, an insoluble monolayer of pentadecanoic acid is spread at the interface of a pendant drop. The surface tension is recorded, and the drop is deposited on a well-defined solid substrate. Fluorescent images of the surface phase of the surfactant are recorded as the drop evaporates. The surfactant monolayer assumes a variety of surface states as a function of the area per molecule at the interface: surface gaseous, surface liquid expanded, and surface liquid condensed phases[4]. Depending upon the surface state of the surfactant as the drop evaporates, transitions of residue patterns left by the particles occur, from the coffee ring pattern to Benard cells to irregular patterns, suggesting a strong resistance to outward flow are observed. The occurrence of Benard cells on a surfactant-rich interface occurs when the interface is in LE-LC coexistence. Prior research concerning surfactant effects on this instability predict that surfactants are strongly stabilizing[5]. The mechanisms for this change in behavior

  16. [Stability of physical state on compound hawthorn dropping pills].

    Science.gov (United States)

    Zhang, Wei; Chen, Hong-Yan; Jiang, Jian-Lan

    2008-11-01

    To evaluate the stability of physical state with accelerate test and dropping in process before and after on compound hawthorn dropping pills. Scanning electron microscope, TG-DTA, FT-IR and XRD were used. The active components presented amorphous, tiny crystal and molecular state in dropping pills, and it had no obvious reaction between PEG 4000 and active components. With time prolonging, a little of active components changed from amorphous state to tiny crystal or molecular state. Solid dispersion improved the stability and dissolution of compound hawthorn dropping pills.

  17. Food scenarios 2025

    DEFF Research Database (Denmark)

    Sundbo, Jon

    2016-01-01

    This article presents the results of a future study of the food sector. Two scenarios have been developed using a combination of: 1) a summary of the relevant scientific knowledge, 2) systematic scenario writing, 3) an expert-based Delphi technique, and 4) an expert seminar assessment. The two...... scenarios present possible futures at global, national (Denmark) and regional (Zealand, Denmark) levels. The main scenario is called ‘Food for ordinary days and celebrations’ (a combination of ‘High-technological food production − The functional society’ and ‘High-gastronomic food − The experience society...

  18. Preparation and characterisation of superheated drop detectors

    International Nuclear Information System (INIS)

    Krishnamoorthy, P.

    1989-01-01

    Basic mechanism of bubble nucleation in superheated drops with respect to minimum energy of radiation and temperature is discussed. Experimental details and techniques for the preparation of Superheated Drop Detectors (SDDs) is explained. For the sample preparation, homogeneous composition of polymer (Morarfloc) and glycerine was used as the host medium and three different refrigerants Mafron-21, Mafron-12 and Mafron-11/12 (50:50) were chosen as the sensitive liquids. A pressure reactor developed at Health and Safety Laboratory is used for dispersing the sensitive liquid drops in the homogeneous composition under pressure. Some of the imporatant detector characteristics were studied. (author). 26 refs., 9 figs., 1 tab

  19. Underwater sound produced by individual drop impacts and rainfall

    DEFF Research Database (Denmark)

    Pumphrey, Hugh C.; Crum, L. A.; Jensen, Leif Bjørnø

    1989-01-01

    An experimental study of the underwater sound produced by water drop impacts on the surface is described. It is found that sound may be produced in two ways: first when the drop strikes the surface and, second, when a bubble is created in the water. The first process occurs for every drop...

  20. Interpreting energy scenarios

    Science.gov (United States)

    Iyer, Gokul; Edmonds, James

    2018-05-01

    Quantitative scenarios from energy-economic models inform decision-making about uncertain futures. Now, research shows the different ways these scenarios are subsequently used by users not involved in their initial development. In the absence of clear guidance from modellers, users may place too much or too little confidence in scenario assumptions and results.

  1. From nuclear reactions to liquid-drop collisions

    International Nuclear Information System (INIS)

    Menchaca R, A.; Huidobro, F.; Martinez D, A.; Michaelian, K.; Perez, A.; Rodriguez, V.; Carjan, N.

    1997-01-01

    A review of the experimental and theoretical situation in coalescence and fragmentation studies of binary liquid-drop collisions is given, putting in perspective our own contributions, which include experiments with mercury and oil drops and the application of a nuclear reaction model, specifically modified by us for the macroscopic case. (Author)

  2. Is the tri-bimaximal mixing accidental?

    CERN Document Server

    Abbas, Mohammed

    2010-01-01

    The Tri-bimaximal (TBM) mixing is not accidental if structures of the corresponding leptonic mass matrices follow immediately from certain (residual or broken) flavor symmetry. We develop a simple formalism which allows one to analyze effects of deviations of the lepton mixing from TBM on structure of the neutrino mass matrix and on underlying flavor symmetry. We show that possible deviations from the TBM mixing can lead to strong modifications of the mass matrix and strong violation of the TBM mass relations. As a result, the mass matrix may have an "anarchical" structure with random values of elements or it may have some symmetry which differs from the TBM symmetry. Interesting examples include matrices with texture zeros, matrices with certain "flavor alignment" as well as hierarchical matrices with a two-component structure, where the dominant and sub-dominant contributions have different symmetries. This opens up new approaches to understand the lepton mixing.

  3. External hazards in the PRA of Olkiluoto 1 and 2 NPP units - Accidental oil spills

    International Nuclear Information System (INIS)

    Tunturivuori, Lasse

    2014-01-01

    Oil transports in Finnish territorial waters have increased significantly during the last 10 years. The Gulf of Finland is at this moment a very important route of oil being transported from Russia to the Western Europe. Although the number of accidental oil spills is decreasing in amount and in size, there is a growing concern of their effects to nuclear power plants (NPPs). The amounts of oil transported on the Gulf of Bothnia are much smaller than on the Gulf of Finland. However, accidental oil spills have occurred also there, the size and amount of which are smaller, though. Accidental oil spills are often a result of grounding of a ship or collision of two ships, and often occur during harsh weather conditions like storm or dense fog. However, also coastal oil depots may break, the oil of which may spread over wide distances on the sea. The modelling of initiating events resulting from accidental oil spills includes oil spill response actions performed by the regional rescue services, alarming of the oil spill by the emergency response centre to the NPP rescue services and spill response by the NPPs rescue services. It is unclear what the consequences are if drifted oil would enter the coolant water tunnels. The effect of different oil types to the operation of the safety-related service water systems and components are being assessed. In the ultimate case, an oil spill would clog the inlet channels thus failing the ultimate heat sink of the NPP units. The licensee is evaluating what is the optimal way to operate the NPP units in the case that an oil slick is threatening the plant to ensure reactor core cooling and RHR. The continued operation of, and especially the cooling of, at least one auxiliary feedwater pump is critical in the mitigation of the initiating event. Strategies, like reversing the water flow of the cooling water channels or closing of the cooling water channels, are being evaluated. (authors)

  4. Drop dynamics on a stretched viscoelastic filament: An experimental study

    Science.gov (United States)

    Peixinho, Jorge; Renoult, Marie-Charlotte; Crumeyrolle, Olivier; Mutabazi, Innocent

    2016-11-01

    Capillary pressure can destabilize a thin liquid filament during breakup into a succession of drops. Besides, the addition of a linear, high molecular weight, flexible and soluble polymer is enough to modify the morphology of this instability. In the time period preceding the breakup, the development of beads-on-a-string structures where drops are connected by thin threads is monitored. The drops dynamics involve drop formation, drop migration and drop coalescence. Experiments using a high-speed camera on stretched bridges of viscoelastic polymeric solutions were conducted for a range of viscosities and polymer concentrations. The rheological properties of the solutions are also quantified through conventional shear rheology and normal stress difference. The overall goal of this experimental investigation is to gain more insight into the formation and time evolution of the drops. The project BIOENGINE is co-financed by the European Union with the European regional development fund and by the Normandie Regional Council.

  5. Calculation of drop course of control rod assembly in PWR

    International Nuclear Information System (INIS)

    Zhou Xiaojia; Mao Fei; Min Peng; Lin Shaoxuan

    2013-01-01

    The validation of control rod drop performance is an important part of safety analysis of nuclear power plant. Development of computer code for calculating control rod drop course will be useful for validating and improving the design of control rod drive line. Based on structural features of the drive line, the driving force on moving assembly was analyzed and decomposed, the transient value of each component of the driving force was calculated by choosing either theoretical method or numerical method, and the simulation code for calculating rod cluster control assembly (RCCA) drop course by time step increase was achieved. The analysis results of control rod assembly drop course calculated by theoretical model and numerical method were validated by comparing with RCCA drop test data of Qinshan Phase Ⅱ 600 MW PWR. It is shown that the developed RCCA drop course calculation code is suitable for RCCA in PWR and can correctly simulate the drop course and the stress of RCCA. (authors)

  6. Scaling during capillary thinning of particle-laden drops

    Science.gov (United States)

    Thete, Sumeet; Wagoner, Brayden; Basaran, Osman

    2017-11-01

    A fundamental understanding of drop formation is crucial in many applications such as ink-jet printing, microfluidic devices, and atomization. During drop formation, the about-to-form drop is connected to the fluid hanging from the nozzle via a thinning filament. Therefore, the physics of capillary thinning of filaments is key to understanding drop formation and has been thoroughly studied for pure Newtonian fluids using theory, simulations, and experiments. In some of the applications however, the forming drop and hence the thinning filament may contain solid particles. The thinning dynamics of such particle-laden filaments differs radically from that of particle-free filaments. Moreover, our understanding of filament thinning in the former case is poor compared to that in the latter case despite the growing interest in pinch-off of particle-laden filaments. In this work, we go beyond similar studies and experimentally explore the impact of solid particles on filament thinning by measuring both the radial and axial scalings in the neck region. The results are summarized in terms of a phase diagram of capillary thinning of particle-laden filaments.

  7. Building micro-soccer-balls with evaporating colloidal fakir drops

    Science.gov (United States)

    Gelderblom, Hanneke; Marín, Álvaro G.; Susarrey-Arce, Arturo; van Housselt, Arie; Lefferts, Leon; Gardeniers, Han; Lohse, Detlef; Snoeijer, Jacco H.

    2013-11-01

    Drop evaporation can be used to self-assemble particles into three-dimensional microstructures on a scale where direct manipulation is impossible. We present a unique method to create highly-ordered colloidal microstructures in which we can control the amount of particles and their packing fraction. To this end, we evaporate colloidal dispersion drops from a special type of superhydrophobic microstructured surface, on which the drop remains in Cassie-Baxter state during the entire evaporative process. The remainders of the drop consist of a massive spherical cluster of the microspheres, with diameters ranging from a few tens up to several hundreds of microns. We present scaling arguments to show how the final particle packing fraction of these balls depends on the drop evaporation dynamics, particle size, and number of particles in the system.

  8. Evaporation kinetics in the hanging drop method of protein crystal growth

    Science.gov (United States)

    Baird, James K.; Frieden, Richard W.; Meehan, E. J., Jr.; Twigg, Pamela J.; Howard, Sandra B.; Fowlis, William A.

    1987-01-01

    An engineering analysis of the rate of evaporation of solvent in the hanging drop method of protein crystal growth is presented; these results are applied to 18 different drop and well arrangements commonly encountered in the laboratory, taking into account the chemical nature of the salt, the drop size and shape, the drop concentration, the well size, the well concentration, and the temperature. It is found that the rate of evaporation increases with temperature, drop size, and with the salt concentration difference between the drop and the well. The evaporation possesses no unique half-life. Once the salt in the drop achieves about 80 percent of its final concentration, further evaporation suffers from the law of diminishing returns.

  9. Visualization study of film drops produced by bubble bursting

    International Nuclear Information System (INIS)

    Ma Chao; Bo Hanliang

    2012-01-01

    The phenomenon that bubble bursting results in drops production is common in the steam generator of the nuclear power plant, and the fine drops generated by this way is one of the most important source of the drop entrainment in the vapor stream. The visualization experiment about the film drops produced by the bursting bubbles at a free water surface was studied using a high-speed video camera. The results show that the bubble cap breaks up in a single point, within the limits of bubble size in the experiment at present. The whole process can be distinguished into four successive stages: A primary inertial drainage, the bubble cap puncture at the foot or on the top, the film rolls-up and the liquid ring appearing with the hole expanding, and fine film drops emission under the effect of destabilization of a Rayleigh-Taylor type. The expression about the bubble radius and the film drops number is obtain by fitting the experiment data at the bubble radius range from 3-25 mm. The result trend agrees well with the previous work. (authors)

  10. Accidental cut-throat injuries from the broken windshield of an auto rickshaw: Two unusual cases.

    Science.gov (United States)

    Swain, Rajanikanta; Dhaka, Shivani; Sharma, Munish; Bakshi, Mantaran Singh; Murty, O P; Sikary, Asit Kumar

    2018-01-01

    Accidental cut-throat injuries are extremely rare and usually involve a sharp-edged weapon. In this paper, two cases of a cut-throat wound to two auto-rickshaw drivers are presented where the broken windshield of the auto-rickshaws was responsible for the wounds. In both the cases, fatal incised wounds were present over the neck, cutting the soft tissue along with the major vessels. The death occurred due to exsanguination caused by neck-vessel injury in one case and trachea along with neck-vessel injury in the second case. Although the wounds on the neck initially suggested homicide, they were found to have occurred accidentally as a result of a road traffic accident involving a head-on collision of auto rickshaws. The injuries were inflicted by the shattered glass of the windshield.

  11. Method and apparatus for controlling accidental releases of tritium

    International Nuclear Information System (INIS)

    Galloway, T.R.

    1980-01-01

    An improvement in a tritium control system based on a catalytic oxidation reactor is provided wherein accidental releases of tritium into room air are controlled by flooding the catalytic oxidation reactor with hydrogen when the tritium concentration in the room air exceeds a specified limit. The sudden flooding with hydrogen heats the catalyst to a high temperature within seconds, thereby greatly increasing the catalytic oxidation rate of tritium to tritiated water vapor. Thus, the catalyst is heated only when needed. In addition to the heating effect, the hydrogen flow also swamps the tritium and further reduces the tritium release

  12. Method and apparatus for controlling accidental releases of tritium

    Science.gov (United States)

    Galloway, Terry R. [Berkeley, CA

    1980-04-01

    An improvement in a tritium control system based on a catalytic oxidation reactor wherein accidental releases of tritium into room air are controlled by flooding the catalytic oxidation reactor with hydrogen when the tritium concentration in the room air exceeds a specified limit. The sudden flooding with hydrogen heats the catalyst to a high temperature within seconds, thereby greatly increasing the catalytic oxidation rate of tritium to tritiated water vapor. Thus, the catalyst is heated only when needed. In addition to the heating effect, the hydrogen flow also swamps the tritium and further reduces the tritium release.

  13. Suggested Methods for Assessment of Accidental External Exposure and Internal Contamination of Workers and their Medical Management

    International Nuclear Information System (INIS)

    Mahmoud, K.A.; Morsy, Samira M.; Hanna, I.R.A.; Hafez, M.B.; Mohamed, H.O.; Jahns, E.; Saied, F.I.A.

    1969-01-01

    Certain assumptions are given for the amount of fission products released from a research reactor after the occurrence of an accident. The size and location of radioactive cloud are assumed, and the corresponding external and internal exposures of workers are computed. A method is suggested for assessment of accidental external radiation dose based on experimental studies performed on the changes of quenching effect of plasma or sera as a.result of whole- body gamma-radiation ranging from 25-200 rems. For assessment of accidentally internally incorporated gamma emitters we suggest the standard chair whole-body counter technique which was found to detect reliably 1/100 of the maximum permissible body burden within eight minutes. It was also suggested that a separation method based on the use of absorption phenomena observed for Sephadex (gel resin) can be applied for quick determination of gross alpha activity in urine. For management of accidentally exposed workers to radiation doses of a lethal or sublethal nature, bone-marrow transplantation therapy and blood component therapy in sterile rooms is discussed in the light of experience gained from treatment of leukaemia with intensive chemotherapy. (author)

  14. Experimental Setup For Study of Drop Deformation In Air Flow

    Directory of Open Access Journals (Sweden)

    Basalaev Sergey

    2017-01-01

    Full Text Available Experimental study for study of deformation of drops in air flow is considered. Experimental setup includes a module for obtaining the drops, an air flow system and measuring system. Module for formation of drops is in the form of vertically arranged dropper with capillary with the possibility of formation of fixed drops. Air flow supply system comprises an air pump coupled conduit through a regulating valve with a cylindrical pipe, installed coaxially with dropper. The measuring system includes the video camera located with possibility of visualization of drop and the Pitot gage for measurement of flow rate of air located in the output section of branch pipe. This experimental setup allows to provide reliable and informative results of the investigation of deformation of drops in the air flow.

  15. Toxic vapor concentrations in the control room following a postulated accidental release

    International Nuclear Information System (INIS)

    Wing, J.

    1979-05-01

    An acceptable method is presented for calculating the vapor concentrations in a control room as a function of time after a postulated accidental release. Included are the mathematical formulas for computing the rates of vaporization and evaporation of liquid spills, the vapor dispersion in air, and the control room air exchange. A list of toxic chemicals and their physical properties is also given

  16. Structural analysis of fuel in a vertical drop cask system accident

    International Nuclear Information System (INIS)

    Muñoz Cardador, J.; Cerracín Arranz, A.; Muñoz-Reja Ruiz, C.

    2016-01-01

    Una de las situaciones más limitantes en el análisis de integridad del combustible gastado durante el transporte, es el de los hipotéticos accidentes de caída del contenedor. El escenario que debe ser analizado en este tipo de accidentes, según especifica el título 10 de las Code Federal Regulations (10 CFR 71.73) de la NRC, es el de la caída libre del sistema combustible-contenedor desde una altura de nueve metros con el posterior impacto contra una superficie plana, rígida y horizontal en la posición más desfavorable. En concreto, en este artículo se realiza el análisis de la respuesta del combustible bajo el supuesto de caída en posición vertical del contenedor. Para este tipo de análisis, Enusa ha desarrollado y presenta en este artículo un modelo elasto-plástico de elementos finitos capaz de simular mediante un cálculo cuasiestático el comportamiento de una barra combustible irradiada durante el accidente postulado y evaluar su integridad estructural. Aproximaciones mediante un cálculo dinámico a este análisis también has sido acometidas y sus resultados podrán ser presentados en futuros artículos.

  17. Fundamental investigation on electrostatic travelling-wave transport of a liquid drop

    International Nuclear Information System (INIS)

    Kawamoto, Hiroyuki; Hayashi, Satoshi

    2006-01-01

    Basic research has been carried out on the transport of a liquid drop and a soft body in an electrostatic travelling field. A conveyer consisting of parallel electrodes was constructed and a four-phase electrostatic travelling wave was applied to the electrodes to transport the drop on the conveyer. The following were clarified by the experiment. (1) Drops and soft bodies can be transported by virtue of the travelling wave in an insulative liquid that is insoluble to the drop, because the drop was charged on the conveyer by friction and driven by the Coulomb force. (2) A drop that covered less than three arrays of the parallel electrode can be transported in the travelling wave field. (3) A threshold voltage exists for the transport. (4) Although the transport was possible not only for insulative but also for conductive drops, the insulative drop can be transported efficiently. (5) The modes of transport can be classified into three categories, namely, a synchronous region where the motion of the liquid drop is in synchrony with the travelling wave, a delayed response regime, and a regime where transport does not occur. (6) Mixing of drops for a chemical reaction was demonstrated on the conveyer with scroll electrodes. A simple model was proposed to simulate the dynamics of the drop in the electrostatic travelling field

  18. Satellite Formation during Coalescence of Unequal Size Drops

    KAUST Repository

    Zhang, F. H.

    2009-03-12

    The coalescence of a drop with a flat liquid surface pinches off a satellite from its top, in the well-known coalescence cascade, whereas the coalescence of two equally sized drops does not appear to leave such a satellite. Herein we perform experiments to identify the critical diameter ratio of two drops, above which a satellite is produced during their coalescence. We find that the critical parent ratio is as small as 1.55, but grows monotonically with the Ohnesorge number. The daughter size is typically about 50% of the mother drop. However, we have identified novel pinch-off dynamics close to the critical size ratio, where the satellite does not fully separate, but rather goes directly into a second stage of the coalescence cascade, thus generating a much smaller satellite droplet.

  19. Electrostatic charging and levitation of helium II drops

    International Nuclear Information System (INIS)

    Niemela, J.J.

    1997-01-01

    Liquid Helium II drops, of diameter 1 mm or less, are charged with positive helium ions and subsequently levitated by static electric fields. Stable levitation was achieved for drops of order 100-150 micrometers in diameter. The suspended drops could be translated to arbitrary positions within the levitator using additional superimposed DC electric fields, and also could be made to oscillate stably about their average positions by means of an applied time-varying electric field. A weak corona discharge was used to produce the necessary ions for levitation. A novel superfluid film flow device, developed for the controlled deployment of large charged drops, is described. Also discussed is an adjustable electric fountain that requires only a field emission tip operating at modest potentials, and works in both Helium I and Helium II

  20. Satellite Formation during Coalescence of Unequal Size Drops

    KAUST Repository

    Zhang, F. H.; Li, E. Q.; Thoroddsen, Sigurdur T

    2009-01-01

    The coalescence of a drop with a flat liquid surface pinches off a satellite from its top, in the well-known coalescence cascade, whereas the coalescence of two equally sized drops does not appear to leave such a satellite. Herein we perform experiments to identify the critical diameter ratio of two drops, above which a satellite is produced during their coalescence. We find that the critical parent ratio is as small as 1.55, but grows monotonically with the Ohnesorge number. The daughter size is typically about 50% of the mother drop. However, we have identified novel pinch-off dynamics close to the critical size ratio, where the satellite does not fully separate, but rather goes directly into a second stage of the coalescence cascade, thus generating a much smaller satellite droplet.

  1. Two secondary drops

    Indian Academy of Sciences (India)

    Figure shows formation of two secondary drops of unequal size and their merger. The process is same as the earlier process until t= 0.039 Tc with necking occurring at two places, one at the bottom of the column and the other at the middle. The necking at the middle of the liquid column is due to Raleigh instability.

  2. Signos Vitales de los CDC–Prevención de muertes por accidentes cerebrovasculares (Preventing Stroke Deaths)

    Centers for Disease Control (CDC) Podcasts

    2017-09-06

    Este podcast se basa en la edición de septiembre del 2017 del informe Signos Vitales de los CDC. Cada año, más de 140 000 personas mueren y muchos sobrevivientes quedan con discapacidades. El ochenta por ciento de los accidentes cerebrovasculares son prevenibles. Conozca los signos de un accidente cerebrovascular y sepa cómo prevenirlo.  Created: 9/6/2017 by Centers for Disease Control and Prevention (CDC).   Date Released: 9/6/2017.

  3. [Accidental injection of sodium hypochlorite in inferior alveolar nerve block anesthesia].

    Science.gov (United States)

    Hongyan, Li; Jian, Xu; Baorong, Zhang; Yue, Jia; Minhua, Liu; Yilang, Luo; Jing, Zhao

    2016-12-01

    Sodium hypochlorite (NaClO) has been widely used in clinical practice as one of the most efficient root canal irrigants. Its properties include broad-spectrum antimicrobial activity and ability to dissolve necrotic tissues. However, when used improperly, NaClO can cause a series of adverse reactions, such as mucosal inflammation, irritation, or injury. This paper presents a case of accidental injection of NaClO in inferior alveolar nerve block anesthesia.

  4. El recuerdo de los accidentes de tráfico: Memoria de los testigos

    OpenAIRE

    Diges Junco, Margarita; Manzanero, Antonio L.

    1995-01-01

    En este trabajo se trata la recogida de datos subjetivos originados por las personas presentes en el accidente, una cuestión de vital importancia en la investigación de éstos y cuya exactitud depende de dos factores principales: la honestidad y la memoria de la persona que los proporciona.

  5. Interfacial Instabilities in Evaporating Drops

    Science.gov (United States)

    Moffat, Ross; Sefiane, Khellil; Matar, Omar

    2007-11-01

    We study the effect of substrate thermal properties on the evaporation of sessile drops of various liquids. An infra-red imaging technique was used to record the interfacial temperature. This technique illustrates the non-uniformity in interfacial temperature distribution that characterises the evaporation process. Our results also demonstrate that the evaporation of methanol droplets is accompanied by the formation of wave-trains in the interfacial temperature field; similar patterns, however, were not observed in the case of water droplets. More complex patterns are observed for FC-72 refrigerant drops. The effect of substrate thermal conductivity on the structure of the complex pattern formation is also elucidated.

  6. Rain drop size densities over land and over sea

    Science.gov (United States)

    Bumke, Karl

    2010-05-01

    A detailed knowledge of rain drop size densities is an essential presumption with respect to remote sensing of precipitation. Since maritime and continental aerosol is significantly different yielding to differences in cloud drop size densities, maritime and continental rain drop size densities may be different, too. In fact only a little is known about differences in rain drop size densities between land and sea due to a lack of suitable data over the sea. To fill in this gap measurements were performed during the recent 10 years at different locations in Germany and on board of research vessels over the Baltic Sea, the North Sea, Atlantic, Indian, and Pacific Ocean. Measurements were done by using an optical disdrometer (ODM 470, Großklaus et al., 1998), which is designed especially to perform precipitation measurements on moving ships and under high wind speeds. Temporal resolution of measurements is generally 1 minute, total number of time series is about 220000. To investigate differences in drop size densities over land and over sea measurements have been divided into four classes on the basis of prevailing continental or maritime influence: land measurements, coastal measurements, measurements in areas of semi-enclosed seas, and open sea measurements. In general differences in drop size densities are small between different areas. A Kolmogoroff Smirnoff test does not give any significant difference between drop size densities over land, coastal areas, semi-enclosed, and open seas at an error rate of 5%. Thus, it can be concluded that there are no systematic differences between maritime and continental drop size densities. The best fit of drop size densities is an exponential decay curve, N(D ) = 6510m -3mm -1mm0.14h- 0.14×R-0.14×exp(- 4.4mm0.25h-0.25×R- 0.25×D mm -1), it is estimated by using the method of least squares. N(D) is the drop size density normalized by the resolution of the optical disdrometer, D the diameter of rain drops in mm, and R the

  7. Integrative Scenario Development

    Directory of Open Access Journals (Sweden)

    Joerg A. Priess

    2014-03-01

    Full Text Available Scenarios are employed to address a large number of future environmental and socioeconomic challenges. We present a conceptual framework for the development of scenarios to integrate the objectives of different stakeholder groups. Based on the framework, land-use scenarios were developed to provide a common base for further research. At the same time, these scenarios assisted regional stakeholders to bring forward their concerns and arrive at a shared understanding of challenges between scientific and regional stakeholders, which allowed them to eventually support regional decision making. The focus on the integration of views and knowledge domains of different stakeholder groups, such as scientists and practitioners, required rigorous and repeated measures of quality control. The application of the integrative concept provided products for both stakeholder groups, and the process of scenario development facilitated cooperation and learning within both the scientist and practitioner groups as well as between the two groups.

  8. Analysis of the rod drop accident for Angra-1

    International Nuclear Information System (INIS)

    Veloso, M.A.; Atayde, P.A.

    1989-01-01

    The aim of this work is to present a rod drop accident analysis for the third cycle of the Angra-1 nuclear power plant operating in the automatic control mode. In this analysis all possible configurations for dropped rods caused by a single failure in the controller circuits have been considered. The dropped rod worths, power distributions and excore detector tilts were determined by using the Siemens/KWU neutronic code system, in particular the MEDIUM2, PINPOW and DETILT codes. The transient behaviour of the plant during the rod drop event was simulated with the SACI2/MOD0 code, developed at CDTN. Determinations related to the DNBR design limit were conducted by utilizing the CDTN PANTERA-1P subchannel code. The transient analysis indicated that for dropped rod worths greater than about 425 pcm reactor trip from negative neutron flux rate will take place independently of core conditions. In the range from 0 to 425 pcm large power overshoots may occur as a consequence of the automatic control system action. The magnitude of the maximum power peaking during the event increases with the dropped rod worth, as far as the control bank is able to compensate the initial reactivity decrease. Thermal-hydraulic evaluations carried out with the PANTERA-1P code show that for all the relevant dropped rod worths the minimum DNBR will remain above a limit value of 1.365. Even if this conservative limit is met, the calculated nuclear power peaking factors, F N AH , will be at least 6% higher than the allowable F N AH -values. Therefore, the DNBR design margin will be preserved at the event of rod drop. (author)

  9. Accidental head injuries in children under 5 years of age

    International Nuclear Information System (INIS)

    Johnson, K.; Fischer, T.; Chapman, S.; Wilson, B.

    2005-01-01

    AIM: To evaluate the type and nature of head injuries sustained by children under the age of 5 years who present to a busy accident and emergency (A and E) department following an accidental fall. MATERIALS AND METHODS: This study included all children under the age of 5 years, who over an 8-month period were referred to our A and E Department with head injury following an accidental fall. Data were collected regarding the height of the fall, whether or not stairs were involved, the type of surface that the child landed on and the height of the child. This was correlated with any soft-tissue injury or skull fracture. RESULTS: A total of 72 children (aged 4 months to 4.75 years) fulfilled all the criteria for an accidental fall. The heights of the falls ranged from less than 50 cm to over 3 m, with the majority below 1 m. Of the falls, 49 were onto a hard surface and 23 were onto a soft surface. Of the 72 children, 52 had visible evidence of head injury, 35 (71%) of 49 being the result of falls onto hard surfaces and 17 (74%) of 23 onto soft (carpeted) surfaces. There was no significant difference in the type of surface that resulted in a visible head injury. A visible head injury was seen in all children who fell from a height of over 1.5 m and in 95% of children who fell over 1 m. Of the 72 children, 32 (44%) had skull radiographs performed in accordance with established guidelines and 4 (12.5%) were identified as having a fracture. Of the 3 linear parietal fractures 2 were inflicted by falls of just over 1 m (from a work surface) and 1 by a fall of 80 to 90 cm onto the hard-edged surface of a stone fire surround. The 4th was a fracture of the base of skull following a fall from more than 3 m (from a first-storey window). CONCLUSIONS: In the vast majority of domestic accidents children do not suffer significant harm. Skull fractures are rare and probably occur in less than 5% of cases. To cause a skull fracture the fall needs to be from over 1 m or, if from a

  10. The future of scenarios: issues in developing new climate change scenarios

    International Nuclear Information System (INIS)

    Pitcher, Hugh M

    2009-01-01

    In September, 2007, the IPCC convened a workshop to discuss how a new set of scenarios to support climate model runs, mitigation analyses, and impact, adaptation and vulnerability research might be developed. The first phase of the suggested new approach is now approaching completion. This article discusses some of the issues raised by scenario relevant research and analysis since the last set of IPCC scenarios were created (IPCC SRES, 2000) that will need to be addressed as new scenarios are developed by the research community during the second phase. These include (1) providing a logic for how societies manage to transition from historical paths to the various future development paths foreseen in the scenarios, (2) long-term economic growth issues, (3) the appropriate GDP metric to use (purchasing power parity or market exchange rates), (4) ongoing issues with moving from the broad geographic and time scales of the emission scenarios to the finer scales needed for impacts, adaptation and vulnerability analyses and (5) some possible ways to handle the urgent request from the policy community for some guidance on scenario likelihoods. The challenges involved in addressing these issues are manifold; the reward is greater credibility and deeper understanding of an analytic tool that does much to form the context within which many issues in addition to the climate problem will need to be addressed.

  11. The future of scenarios: issues in developing new climate change scenarios

    Science.gov (United States)

    Pitcher, Hugh M.

    2009-04-01

    In September, 2007, the IPCC convened a workshop to discuss how a new set of scenarios to support climate model runs, mitigation analyses, and impact, adaptation and vulnerability research might be developed. The first phase of the suggested new approach is now approaching completion. This article discusses some of the issues raised by scenario relevant research and analysis since the last set of IPCC scenarios were created (IPCC SRES, 2000) that will need to be addressed as new scenarios are developed by the research community during the second phase. These include (1) providing a logic for how societies manage to transition from historical paths to the various future development paths foreseen in the scenarios, (2) long-term economic growth issues, (3) the appropriate GDP metric to use (purchasing power parity or market exchange rates), (4) ongoing issues with moving from the broad geographic and time scales of the emission scenarios to the finer scales needed for impacts, adaptation and vulnerability analyses and (5) some possible ways to handle the urgent request from the policy community for some guidance on scenario likelihoods. The challenges involved in addressing these issues are manifold; the reward is greater credibility and deeper understanding of an analytic tool that does much to form the context within which many issues in addition to the climate problem will need to be addressed.

  12. Vortex-ring-induced large bubble entrainment during drop impact

    KAUST Repository

    Thoraval, Marie-Jean

    2016-03-29

    For a limited set of impact conditions, a drop impacting onto a pool can entrap an air bubble as large as its own size. The subsequent rise and rupture of this large bubble plays an important role in aerosol formation and gas transport at the air-sea interface. The large bubble is formed when the impact crater closes up near the pool surface and is known to occur only for drops that are prolate at impact. Herein we use experiments and numerical simulations to show that a concentrated vortex ring, produced in the neck between the drop and the pool, controls the crater deformations and pinchoff. However, it is not the strongest vortex rings that are responsible for the large bubbles, as they interact too strongly with the pool surface and self-destruct. Rather, it is somewhat weaker vortices that can deform the deeper craters, which manage to pinch off the large bubbles. These observations also explain why the strongest and most penetrating vortex rings emerging from drop impacts are not produced by oblate drops but by more prolate drop shapes, as had been observed in previous experiments.

  13. Ready-made allogeneic ABO-specific serum eye drops

    DEFF Research Database (Denmark)

    Harritshøj, Lene Holm; Nielsen, Connie; Ullum, Henrik

    2014-01-01

    serum treatment. CONCLUSION: Ready-made ABO-identical allogeneic serum eye drops were straightforwardly produced, quality-assured and registered as a safe standard blood product for the treatment of certain cases of severe dry eye disease. Therapeutic efficacy was comparable to previous reports......PURPOSE: To overcome problems and delays of the preparation of autologous serum eye drops, a production line of ABO-specific allogeneic serum eye drops from male blood donors was set up in a blood bank. Feasibility, clinical routine, safety and efficacy were evaluated in a cohort of patients...

  14. Coincidence-counting corrections for accidental coincidences, set dead time and intrinsic dead time

    International Nuclear Information System (INIS)

    Wyllie, H.A.

    1998-01-01

    An equation is derived for calculating the radioactivity of a source from the results of coincidence counting, taking into account dead-time losses and accidental coincidences. The corrections allow for the extension of the set dead time in the p channel by the intrinsic dead time. Experimental verification shows improvement over a previous equation. (author)

  15. Structural evaluation of W-211 flexible receiver platforms and tank pit walls

    International Nuclear Information System (INIS)

    Shrivastava, H.P.

    1997-01-01

    This document is a structural analysis of the Flexible Receiver Platforms and the tank-pit wall during removal of equipment and during a accidental drop of that equipment. The platform and the pit walls must withstand a accidental drop of a mixer and transfer pumps in specific pits in tanks 102-AP and 104-AP. A mixer pump will be removed from riser 11 in pit 2A on tank 241-AP-102. A transfer pump will be removed from riser 13 in pit 2D on tank 241-AP-102 and another transfer pump will be removed from riser 3A in pit 4A on tank 241-AP-104

  16. Dropped Ceiling

    OpenAIRE

    Tabet, Rayyane

    2012-01-01

    On December 2nd 1950 the first drop of Saudi oil arrived to Lebanon via the newly constructed Trans-Arabian Pipeline, the world's longest pipeline and the largest American private investment in a foreign land. The 30inch wide structure which spanned 1213 kilometers passing through Saudi Arabia, Jordan, and Syria to end in Lebanon had required 3 years of planning and surveying, 2 years of installation, the fabrication of 256,000 tons of steel tubes, the employment of 30,000 workers, the ratifi...

  17. Eye-Drops for Activation of DREADDs

    Directory of Open Access Journals (Sweden)

    William T. Keenan

    2017-11-01

    Full Text Available Designer Receptors Exclusively Activated by Designer Drugs (DREADDs are an important tool for modulating and understanding neural circuits. Depending on the DREADD system used, DREADD-targeted neurons can be activated or repressed in vivo following a dose of the DREADD agonist clozapine-N-oxide (CNO. Because DREADD experiments often involve behavioral assays, the method of CNO delivery is important. Currently, the most common delivery method is intraperitoneal (IP injection. IP injection is both a fast and reliable technique, but it is painful and stressful particularly when many injections are required. We sought an alternative CNO delivery paradigm, which would retain the speed and reliability of IP injections without being as invasive. Here, we show that CNO can be effectively delivered topically via eye-drops. Eye-drops robustly activated DREADD-expressing neurons in the brain and peripheral tissues and does so at the same dosages as IP injection. Eye-drops provide an easier, less invasive and less stressful method for activating DREADDs in vivo.

  18. Accidental Discovery of Information on the User-Defined Social Web: A Mixed-Method Study

    Science.gov (United States)

    Lu, Chi-Jung

    2012-01-01

    Frequently interacting with other people or working in an information-rich environment can foster the "accidental discovery of information" (ADI) (Erdelez, 2000; McCay-Peet & Toms, 2010). With the increasing adoption of social web technologies, online user-participation communities and user-generated content have provided users the…

  19. An advanced model for spreading and evaporation of accidentally released hazardous liquids on land

    NARCIS (Netherlands)

    Trijssenaar-Buhre, I.J.M.; Sterkenburg, R.P.; Wijnant-Timmerman, S.I.

    2009-01-01

    Pool evaporation modelling is an important element in consequence assessment of accidentally released hazardous liquids. The evaporation rate determines the amount of toxic or flammable gas released into the atmosphere and is an important factor for the size of a pool fire. In this paper a

  20. An advanced model for spreading and evaporation of accidentally released hazardous liquids on land

    NARCIS (Netherlands)

    Trijssenaar-Buhre, I.J.M.; Wijnant-Timmerman, S.L.

    2008-01-01

    Pool evaporation modelling is an important element in consequence assessment of accidentally released hazardous liquids. The evaporation rate determines the amount of toxic or flammable gas released into the atmosphere and is an important factor for the size of a pool fire. In this paper a

  1. Drop test facility available to private industry

    International Nuclear Information System (INIS)

    Shappert, L.B.; Box, W.D.

    1983-01-01

    In 1978, a virtually unyielding drop test impact pad was constructed at Oak Ridge National Laboratory's (ORNL's) Tower Shielding Facility (TSF) for the testing of heavy shipping containers designed for transporting radioactive materials. Because of the facility's unique capability for drop-testing large, massive shipping packages, it has been identified as a facility which can be made available for non-DOE users

  2. Measurement of an Evaporating Drop on a Reflective Substrate

    Science.gov (United States)

    Chao, David F.; Zhang, Nengli

    2004-01-01

    A figure depicts an apparatus that simultaneously records magnified ordinary top-view video images and laser shadowgraph video images of a sessile drop on a flat, horizontal substrate that can be opaque or translucent and is at least partially specularly reflective. The diameter, contact angle, and rate of evaporation of the drop as functions of time can be calculated from the apparent diameters of the drop in sequences of the images acquired at known time intervals, and the shadowgrams that contain flow patterns indicative of thermocapillary convection (if any) within the drop. These time-dependent parameters and flow patterns are important for understanding the physical processes involved in the spreading and evaporation of drops. The apparatus includes a source of white light and a laser (both omitted from the figure), which are used to form the ordinary image and the shadowgram, respectively. Charge-coupled-device (CCD) camera 1 (with zoom) acquires the ordinary video images, while CCD camera 2 acquires the shadowgrams. With respect to the portion of laser light specularly reflected from the substrate, the drop acts as a plano-convex lens, focusing the laser beam to a shadowgram on the projection screen in front of CCD camera 2. The equations for calculating the diameter, contact angle, and rate of evaporation of the drop are readily derived on the basis of Snell s law of refraction and the geometry of the optics.

  3. Creatin-kinase elevation after accidental ingestion of almotriptan in an 18-month-old girl.

    Science.gov (United States)

    Castagno, E; Lupica, M; Viola, S; Savino, F; Miniero, R

    2014-02-01

    Few studies have been published to demonstrate tolerability and efficacy of almotriptan in adolescents and children with migraine, particularly in the first years of life, though preliminary results are favorable. We report the case of an 18-month-old infant with elevation of serum levels of creatin-kinase after the accidental ingestion of almotriptan. A previously healthy 18-month-old girl (weight: 13 kg) was admitted to our Department four hours after the accidental ingestion of 6.25 mg of almotriptan (0.48 mg/kg), without any specific symptom. The performed investigations showed high serum levels of creatin-kinase (CK) (527 IU/L; normal values: 24-170 IU/L). Transaminase, creatinine, aldolase, myoglobin and troponin T serum levels were normal. The electrocardiogram proved negative. Initial management consisted of parenteral rehydration with saline solution. CK levels lowered significantly at 12 hours (455 IU/L) and at 65 hours (188 IU/L) after the ingestion. No symptoms were observed before discharge and on follow-up.

  4. Numerical research of a super-large cooling tower subjected to accidental loads

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yi; Lin, Feng [Department of Building Engineering, Tongji University, Shanghai 200092 (China); Gu, Xianglin, E-mail: gxl@tongji.edu.cn [Department of Building Engineering, Tongji University, Shanghai 200092 (China); Lu, Xiaoqin [Guangdong Electric Power Design Institute, Guangzhou 510660 (China)

    2014-04-01

    With the continued development of nuclear power plants, more and more super-large cooling towers are to be built in China and around the world. For the safe operation of nuclear power plants, research work has been done on the causes of collapse of cooling towers, collapse modes and the secondary disasters caused by the collapse of cooling towers. However, the collapse modes and the ground vibration induced by the collapse of cooling towers subjected to the accidental loads have not been fully understood. This paper has been focused on the modes and mechanisms behavior of the collapse of cooling towers subjected to accidental loads. Meanwhile, prediction of the ground vibration due to the collapse of the cooling towers has also been completed in a parallel project. Using dynamic finite element program LS-DYNA, a 3D finite element model for a super-large cooling tower was developed and the nonlinear material models were incorporated. In this paper, four types of accidental loads were considered to trigger the collapse or local failure of the tower, including vehicle collision, airplane impact, local explosion and missile attack. It was found that vehicle collision, missile attack and small TNT equivalent explosives (2 kg, 20 kg, 200 kg) might result in local failure of the cooling tower, however, the tower can still keep stable. On the other hand, large TNT equivalent explosives (2000 kg, 4500 kg) could cause severe damages in the inclined columns of the cooling tower, and lead to progressive collapse of the entire cooling tower. The two kinds of TNT equivalent explosives caused the same collapse mode while the collapsing duration was different. The airplane impacted at the throat of the cooling tower caused the local failure of shell structure of the tower, and then the progressive collapse of the cooling tower happened due to the gravitational action. The resulting collapse mode was different from that triggered by the local explosion.

  5. Numerical research of a super-large cooling tower subjected to accidental loads

    International Nuclear Information System (INIS)

    Li, Yi; Lin, Feng; Gu, Xianglin; Lu, Xiaoqin

    2014-01-01

    With the continued development of nuclear power plants, more and more super-large cooling towers are to be built in China and around the world. For the safe operation of nuclear power plants, research work has been done on the causes of collapse of cooling towers, collapse modes and the secondary disasters caused by the collapse of cooling towers. However, the collapse modes and the ground vibration induced by the collapse of cooling towers subjected to the accidental loads have not been fully understood. This paper has been focused on the modes and mechanisms behavior of the collapse of cooling towers subjected to accidental loads. Meanwhile, prediction of the ground vibration due to the collapse of the cooling towers has also been completed in a parallel project. Using dynamic finite element program LS-DYNA, a 3D finite element model for a super-large cooling tower was developed and the nonlinear material models were incorporated. In this paper, four types of accidental loads were considered to trigger the collapse or local failure of the tower, including vehicle collision, airplane impact, local explosion and missile attack. It was found that vehicle collision, missile attack and small TNT equivalent explosives (2 kg, 20 kg, 200 kg) might result in local failure of the cooling tower, however, the tower can still keep stable. On the other hand, large TNT equivalent explosives (2000 kg, 4500 kg) could cause severe damages in the inclined columns of the cooling tower, and lead to progressive collapse of the entire cooling tower. The two kinds of TNT equivalent explosives caused the same collapse mode while the collapsing duration was different. The airplane impacted at the throat of the cooling tower caused the local failure of shell structure of the tower, and then the progressive collapse of the cooling tower happened due to the gravitational action. The resulting collapse mode was different from that triggered by the local explosion

  6. A deformable surface model for real-time water drop animation.

    Science.gov (United States)

    Zhang, Yizhong; Wang, Huamin; Wang, Shuai; Tong, Yiying; Zhou, Kun

    2012-08-01

    A water drop behaves differently from a large water body because of its strong viscosity and surface tension under the small scale. Surface tension causes the motion of a water drop to be largely determined by its boundary surface. Meanwhile, viscosity makes the interior of a water drop less relevant to its motion, as the smooth velocity field can be well approximated by an interpolation of the velocity on the boundary. Consequently, we propose a fast deformable surface model to realistically animate water drops and their flowing behaviors on solid surfaces. Our system efficiently simulates water drop motions in a Lagrangian fashion, by reducing 3D fluid dynamics over the whole liquid volume to a deformable surface model. In each time step, the model uses an implicit mean curvature flow operator to produce surface tension effects, a contact angle operator to change droplet shapes on solid surfaces, and a set of mesh connectivity updates to handle topological changes and improve mesh quality over time. Our numerical experiments demonstrate a variety of physically plausible water drop phenomena at a real-time rate, including capillary waves when water drops collide, pinch-off of water jets, and droplets flowing over solid materials. The whole system performs orders-of-magnitude faster than existing simulation approaches that generate comparable water drop effects.

  7. Factores asociados con la presentación de accidentes laborales en veterinarios zootecnistas del departamento de Boyacá (Colombia

    Directory of Open Access Journals (Sweden)

    Michael López Cepeda

    2014-01-01

    Full Text Available Objetivo: Cuantificar los Accidentes Laborales (AL e identificar los factores asociados a su presentación en veterinarios zootecnistas del departamento de Boyacá.Materiales y métodos: Este es un estudio observacional de tipo transversal que permitió cuantificar los accidentes laborales (AL en médicos veterinarios zootecnistas (MVZ con matrícula profesional vigente y ejercicio profesional en el departamento de Boyacá. Se calculó el tamaño muestral (n, con una frecuencia estimada de accidentes del 75 %, un error absoluto del 5 % y un nivel de confianza del 95 %, ajustándolo por el tamaño de la población (N. El diseño muestral fue aleatorio simple. El análisis estadístico incluyó correlación de Spearman, X2 y regresión logística. Los análisis se efectuaron con SPSS®. Resultados: El promedio de edad fue de 33,8±8,2 años. El 91,7 % de los encuestados tuvo por los menos un AL que involucró la presencia de animales, agujas, bisturí y/o un medio de movilización al lugar de trabajo. Las lesiones más frecuentes producto de los AL fueron: heridas punzantes y cortantes, contusiones, hematomas, reacciones alérgicas. Los hombres presentaron 3,086 veces más probabilidades de sufrir este tipo de accidentes que las mujeres (p=0,017. El trabajo con grandes animales es la especialidad veterinaria a la cual se dedicaba la mayor proporción (67,1 % de encuestados. En el trabajo con pequeños animales, los accidentes de mayor presentación fueron: atropellamiento por animales, punzada, corte, mordedura, esfuerzo físico y caída/resbalón. Conclusiones: Los resultados obtenidos condicionan y procuran revaluar aspectos ocupacionales en aras de minimizar los riesgos en la actividad rural de Boyacá.

  8. The influence of season of the year on the predicted agricultural consequences of accidental releases of radionuclides to atmosphere

    International Nuclear Information System (INIS)

    Simmonds, J.R.

    1985-02-01

    In Europe, because of the seasonal nature of agricultural practices, the consequences for agriculture of an accidental release of radioactive materials to atmosphere are likely to vary depending upon the time of year when the release occurs. The quantification of this variation is complicated by the need to take into account the introduction of countermeasures to restrict the radiation exposure from ingestion of contaminated foods, and by the presence in accidental releases of radionuclides which persist over several seasons. In this study, the effect on agricultural consequences of accidental releases occurring at different times of the year is examined. The consequences are expressed in terms of the amount of produce affected by restrictions on food supplies and the collective radiation dose from ingestion of food. The investigation has been carried out for three hypothetical releases representing a range of releases postulated for pressurised water reactors (PWRs). The effect of season of the year was determined for accidental releases occurring both in a single, defined set of meteorological conditions and for a range of possible meteorological conditions. For the main part of the study, consideration was limited to agricultural production in the UK only, but the effect of extending the analysis beyond the UK boundary was also considered. The results of the study show that considerable variation can occur in agricultural consequences following an accidental release at different times of the year. For the larger releases considered, this variation is reduced due to the effect of the introduction of countermeasures, particularly when consideration is limited to the UK only. Seasonal variation tends to be greater for the results of a deterministic analysis, which uses a single set of constant meteorological conditions, than for the results of a full probabilistic assessment. From the results presented here it is also seen that for many applications of

  9. Tiller classes on signalgrass pasture according to the cattle droppings position

    Directory of Open Access Journals (Sweden)

    Manoel Eduardo Rozalino Santos

    2010-01-01

    Full Text Available The experiment was carried out aiming to investigate the influence of natural deposition of cattle droppings on population density of several classes of tillers on the Brachiaria decumbens Stapf. cv. Basilisk pasture managed under continuous stocking. Two places on the same pasture were evaluated: one near (immediately adjacent and one far, about 1.0 m, from the cattle droppings. Randomized block design with three repetitions was used. Tillers were classified according to the developmental stage, growth origin, defoliation rate and length. The number of vegetative tillers was higher (P<0.05 at the place that was far from the droppings (1.851 perfilhos/ m2 than at the one near them (848 perfilhos/m2. The number of reproductive tillers was higher (P<0.05 at the place near the droppings. Being near or far from the droppings showed no impact on the population density of dead tillers (584 perfilhos/m2 mean. The number of basal tiller and aerial tillers were higher (P<0.05 at the place far from the droppings, when collated to the place near the droppings. The population densities of both defoliated tillers and tillers without shoot meristem, far from the droppings, were higher (P<0.05, while the population density of nondefoliated tillers was higher (P<0.05 at the place found near the droppings. The shortest tillers were common (P<0.05 at the place far from the droppings, while the highest were frequently found (P<0.05 near the droppings. In the B. decumbens pasture under continuous stocking, deposition of droppings by cattle changes the spatial distribution of tillers categories and thus constitutes a factor causing spatial heterogeneity of vegetation.

  10. Investigation of the fragmentation of molten metals dropped into cold water

    International Nuclear Information System (INIS)

    Shiralkar, G.S.

    1976-11-01

    The physical mechanism by which small quantities of molten metal fragment extensively when dropped into a pool of cold water was investigated. Since this subject has been the focus of considerable research in the past, some of the more prominent theories are briefly discussed. Experiments were conducted dropping small solid spheres at a high temperature instead of molten metal drops, and indicate a significant difference from the latter. Several hypotheses were proposed based on the hydrodynamics of the molten drop and tested analytically. The theory that the drop fragmentation is caused by the violent release of dissolved gas from within the drop was investigated experimentally and lead to the conclusion that tin fragmentation probably does not occur in this way. It is felt that a calculation of the dynamics of the vapor film that would be expected to surround the hot drop is needed. This calculation was not performed but several suggestions and estimates have been made. It would seem that the possibility of metal fragmentation by rapid vaporization of water entrapped within the metal drop is well worth investigating

  11. Successful Thrombolysis and Spasmolysis of Acute Leg Ischemia after Accidental Intra-arterial Injection of Dissolved Flunitrazepam Tablets

    International Nuclear Information System (INIS)

    Radeleff, B.; Stampfl, U.; Sommer, C.-M.; Bellemann, N.; Hyhlik-Duerr, A.; Weber, M.-A.; Boeckler, D.; Kauczor, H.-U.

    2011-01-01

    A 37-year-old man with known intravenous drug abuse presented in the surgical ambulatory care unit with acute leg ischemia after accidental intra-arterial injection of dissolved flunitrazepam tablets into the right femoral artery. A combination of anticoagulation, vasodilatation, and local selective and superselective thrombolysis with urokinase was performed to salvage the leg. As a result of the severe ischemia-induced pain, the patient had to be monitored over the complete therapy period on the intensive care unit with permanent administration of intravenous fluid and analgetics. We describe the presenting symptoms and the interventional technique, and we discuss the recent literature regarding the management of accidental intra-arterial injection of dissolved flunitrazepam tablets.

  12. Non-accidental dettol poisoning in a 3 day old neonate : a rare form ...

    African Journals Online (AJOL)

    2015-02-26

    Feb 26, 2015 ... non-accidental poisoning with dettol® in a neonate. This report presents ... health facility located in Kano city; pregnancy, labour and delivery .... risks undetected as it nearly happened in our index pa- tient. It is equally ... P O, Saliu R O, Adafalu M O. Infanticide in ... hood Non-food poisoning in. Aminu Kano ...

  13. Non-accidental dettol poisoning in a 3 day old neonate : a rare form ...

    African Journals Online (AJOL)

    In Nigeria, Dettol® Antiseptic Solution poisoning is an uncommon occurrence in all age groups. In a registered child specialist clinic in Kano, a three – day old neonate presented with clinical features believed initially to be due to neonatal seizures and sepsis, but which turned out to be due to non-accidental dettol® ...

  14. Acoustically levitated dancing drops: Self-excited oscillation to chaotic shedding

    Science.gov (United States)

    Lin, Po-Cheng; I, Lin

    2016-02-01

    We experimentally demonstrate self-excited oscillation and shedding of millimeter-sized water drops, acoustically levitated in a single-node standing waves cavity, by decreasing the steady acoustic wave intensity below a threshold. The perturbation of the acoustic field by drop motion is a possible source for providing an effective negative damping for sustaining the growing amplitude of the self-excited motion. Its further interplay with surface tension, drop inertia, gravity and acoustic intensities, select various self-excited modes for different size of drops and acoustic intensity. The large drop exhibits quasiperiodic motion from a vertical mode and a zonal mode with growing coupling, as oscillation amplitudes grow, until falling on the floor. For small drops, chaotic oscillations constituted by several broadened sectorial modes and corresponding zonal modes are self-excited. The growing oscillation amplitude leads to droplet shedding from the edges of highly stretched lobes, where surface tension no longer holds the rapid expanding flow.

  15. Clinical perspectives on osteogenesis imperfecta versus non-accidental injury.

    Science.gov (United States)

    Pereira, Elaine Maria

    2015-12-01

    Although non-accidental injuries (NAI) are more common in cases of unexplained fractures than rare disorders such as osteogenesis imperfecta (OI), ruling out OI and other medical causes of fracture is always indicated. The majority of OI patients can be diagnosed with the help of family history, physical examination, and radiographic findings. In particular, there are a few radiological findings which are seen more commonly in NAI than in OI which may help guide clinician considerations regarding the probability of either of these diagnoses. At the same time, molecular testing still merits careful consideration in cases with unexplained fractures without obvious additional signs of abuse. © 2015 Wiley Periodicals, Inc.

  16. Effect of a Multi-Level Education Intervention Model on Knowledge and Attitudes of Accidental Injuries in Rural Children in Zunyi, Southwest China

    Directory of Open Access Journals (Sweden)

    Bo-Ling Cao

    2015-04-01

    Full Text Available Objective: To explore the effect of a school-family-individual (SFI multi-level education intervention model on knowledge and attitudes about accidental injuries among school-aged children to improve injury prevention strategies and reduce the incidence of pediatric injuries. Methods: The random sample of rural school-aged children were recruited by using a multistage, stratified, cluster sampling method in Zunyi, Southwest China from 2012 to 2014, and 2342 children were randomly divided into intervention and control groups. Then children answered a baseline survey to collect knowledge and attitude scores (KAS of accidental injuries. In the intervention group, children, their parents/guardians and the school received a SFI multi-level education intervention, which included a children’s injury-prevention poster at schools, an open letter about security instruction for parents/guardians and multiple-media health education (Microsoft PowerPoint lectures, videos, handbooks, etc. to children. Children in the control group were given only handbook education. After 16 months, children answered a follow-up survey to collect data on accidental injury types and accidental injury-related KAS for comparing the intervention and control groups and baseline and follow-up data. Results: The distribution of gender was not significantly different while age was different between the baseline and follow-up survey. At baseline, the mean KAS was lower for the intervention than control group (15.37 ± 3.40 and 18.35 ± 5.01; p < 0.001. At follow-up, the mean KAS was higher for the intervention than control group (21.16 ± 3.05 and 20.02 ± 3.40; p < 0.001. The increase in KAS in the intervention and control groups was significant (p < 0.001; KAS: 5.79 vs. 1.67 and suggested that children’s injury-related KAS improved in the intervention group. Moreover, the KAS between the groups differed for most subtypes of incidental injuries (based on International

  17. Drop deformation and breakup in a partially filled horizontal rotating cylinder

    Science.gov (United States)

    White, Andrew; Pereira, Caroline; Hyacinthe, Hyaquino; Ward, Thomas

    2014-11-01

    Drop deformation and breakup due to shear flow has been studied extensively in Couette devices as well as in gravity-driven flows. In these cases shear is generated either by the moving wall or the drop's motion. For such flows the drop shape remains unperturbed at low capillary number (Ca), deforms at moderate Ca , and can experience breakup as Ca --> 1 and larger. Here single drops of NaOH(aq) will be placed in a horizontal cylindrical rotating tank partially filled with vegetable oil resulting in 10-2 saponification, can yield lower minimum surface tensions and faster adsorption than non-reactive surfactant systems. Oil films between the wall and drop as well as drop shape will be observed as rotation rates and NaOH(aq) concentration are varied. Results will be presented in the context of previous work on bubble and drop shapes and breakup. NSF CBET #1262718.

  18. Optimizing Decision Preparedness by Adapting Scenario Complexity and Automating Scenario Generation

    Science.gov (United States)

    Dunne, Rob; Schatz, Sae; Flore, Stephen M.; Nicholson, Denise

    2011-01-01

    Klein's recognition-primed decision (RPD) framework proposes that experts make decisions by recognizing similarities between current decision situations and previous decision experiences. Unfortunately, military personnel arQ often presented with situations that they have not experienced before. Scenario-based training (S8T) can help mitigate this gap. However, SBT remains a challenging and inefficient training approach. To address these limitations, the authors present an innovative formulation of scenario complexity that contributes to the larger research goal of developing an automated scenario generation system. This system will enable trainees to effectively advance through a variety of increasingly complex decision situations and experiences. By adapting scenario complexities and automating generation, trainees will be provided with a greater variety of appropriately calibrated training events, thus broadening their repositories of experience. Preliminary results from empirical testing (N=24) of the proof-of-concept formula are presented, and future avenues of scenario complexity research are also discussed.

  19. ANCCLI White Paper V. Nuclear and territories, which roles for the CLIs? Which implication for the population in crisis management and post-accidental management planning?

    International Nuclear Information System (INIS)

    Delalonde, Jean-Claude; Charre, Jean-Pierre

    2017-01-01

    This white paper first states a set of fourteen recommendations regarding crisis management planning, post-accidental management planning, waste management, and the roles of CLIs (local information commissions) in crisis and post-accidental management planning. After an introduction which proposes a presentation of roles CLIs could play in the different stage of this planning (preparation, emergency or crisis, post-accidental), and a discussion of concerned territories, this white paper discusses territory zoning (zoning in situation of emergency, in post-accidental situation) and roles of territories and CLIs. The next part addresses the issue of decontamination: pollution and contamination management (territory decontamination, issue of water resources, waste management) and discusses the roles of territories and CLIs on these issues. The third part addresses the issue of support and protection of population regarding different aspects: census, relocation, continuity of public services, continuity of economic activities, food restrictions, medical follow-up and epidemiology, and compensations. The roles of territories and CLIs on these issues are discussed. The fourth part addresses the issues of information and communication in a crisis or post-accidental situation. The fifth part discusses tools and means needed by the CLIs to cope with these situations. Short contributions from different institutions (ASN, IRSN) and members of the ANCCLI are finally proposed

  20. STUDY ON SOFTENING AND DROPPING PROPERTIES OF METALIZED BURDEN INSIDE BLAST FURNACE

    Directory of Open Access Journals (Sweden)

    Bi-yang Tuo

    2014-12-01

    Full Text Available The inferences of burden metallization rate on softening-melting dropping properties were investigated through softening-melting dropping test of three kinds of metalized burden pressure drop. The results indicated that the softeningmelting temperature interval of pre-reduction mixed burden is bigger than primeval mixed burden, the melting interval narrow with the rise of metallization rate of ferric burden as well as dropping temperature interval. The average pressure drop, maximum pressure drop and softening-melting dropping properties eigenvalue decrease with the rise of metallization rate of ferric burden. Besides, the dropping temperature of burden reduces with the rise of carbon content of molten iron. The combination high metalized burden and higher carbon content of molten iron is benefit to decreasing thickness of cohesive zone and improve permeability of cohesive zone.

  1. Ultrasonic defect sizing using decibel drop methods. III

    International Nuclear Information System (INIS)

    Mills, C.; Goszczynski, J.; Mitchell, A.B.

    1988-03-01

    An earlier study on the use of ultrasonic decibel drop sizing methods for determining the length and vertical extent of flaws in welded steel sections was based on the scanning of machined flaws and fabrication flaws. The present study utilized the techniques developed to perform a similar study of the type of flaws expected to develop during service (e.g. fatigue cracks). The general findings are that: a) the use of decibel drops of less than 14 dB generally undersize the length of fatigue cracks; and b) the use of decibel drop methods to determine vertical extent is questionable

  2. Naturally Occurring Egg Drop Syndrome Infection in Turkeys

    Directory of Open Access Journals (Sweden)

    Z. Biđin

    2007-01-01

    Full Text Available A decrease in the egg quality, production, fertility and hatchability without serious clinical signs of illness was recorded in turkey fl ocks in Croatia at the beginning of 2002. It was assumed that the egg drop syndrome virus might be one of the etiological agents responsible for the abnormalities in the egg production. The systematic serological monitoring, using a haemagglutination inhibition test, showed that the antibodies to the egg drop syndrome virus existed in 94.4 and 55.1% of the sera analysed in 2002 and 2003, respectively. The haemagglutination inhibition titres ranged from 16 to 128. The sera samples were randomly collected from 11 - to 46-week-old hens from the affected fl ocks. The serological evidence of the egg drop syndrome virus infection was confirmed by detection of the presence of the virus genome in the turkey sera by the polymerase chain reaction. Vaccination of the 18- and 25-week-old turkey hens against the egg drop syndrome virus started in March 2003. After this period, the presence of antibodies to the egg drop syndrome virus (the haemagglutination inhibition titres between 16 and 256 was found in 96.7% of the analysed sera, while the egg production reached normal or higher values for the Nicholas hybrid line of turkeys.

  3. La prevención de accidentes (2

    Directory of Open Access Journals (Sweden)

    Chinchilla, M.

    1966-03-01

    Full Text Available Everyone prefers to work in those organizations where their dignity of human beings is respected. One of the most efficient means at the disposal of any firm, to improve the morale of the individual employees, and to establish a spirit of cooperation between the individual and the firm, is to set up a program of accident benefit. It will avoid direct and indirect losses due to working accidents, as analyzed in a previous article, and it will make it possible to improve total performance of each worker, since he will work in a more favorable environment, free from worry about potential danger to his person. It is almost impossible to describe in detail all those items that should be taken into account in a safety program. None the less, and as an indication of their diversity, some sources of danger are mentioned in this chapter, which are closely connected with human safety, such as public curiosity, travelling from one place to another, cleanliness and order.Todas las personas prefieren desempeñar sus tareas en aquellas organizaciones que tienen hacia ellos las consideraciones correspondientes a un ser humano. Uno de los medios más eficaces a disposición de cualquier empresa para elevar la moral del individuo y para crear un lazo de cooperación común entre el individuo y la empresa, es la de llevar a cabo un programa de prevención de accidentes, programa que redundará en el doble fruto: evitar las pérdidas directas e indirectas causadas por los accidentes de trabajo que se detallaron en un trabajo anterior, y conseguir aumentar el rendimiento del operario al hacerle un ambiente más grato por la preocupación que se demuestra hacia su persona. Es casi imposible detallar todos aquellos puntos que se deben tener en cuenta en un programa de seguridad; sin embargo, y como exponente de su diversidad, se señalan en este capítulo algunas causas, que, sin estar ligadas directamente con el trabajo individual, no obstante se encuentran

  4. Role of Structural Asymmetry in Controlling Drop Spacing in Microfluidic Ladder Networks

    Science.gov (United States)

    Wang, William; Maddala, Jeevan; Vanapalli, Siva; Rengasamy, Raghunathan

    2012-02-01

    Manipulation of drop spacing is crucial to many processes in microfluidic devices including drop coalescence, detection and storage. Microfluidic ladder networks ---where two droplet-carrying parallel channels are connected by narrow bypass channels through which the motion of drops is forbidden---have been proposed as a means to control relative separation between pairs of drops. Prior studies in microfluidic ladder networks with vertical bypasses, which possess fore-aft structural symmetry, have revealed that pairs of drops can only undergo reduction in drop spacing at the ladder exit. We investigate the dynamics of drops in microfluidic ladder networks with both vertical and slanted bypasses. Our analytical results indicate that unlike symmetric ladder networks, structural asymmetry introduced by a single slanted bypass can be used to modulate the relative spacing between drops, enabling them to contract, synchronize, expand or even flip at the ladder exit. Our experiments confirm all the behaviors predicted by theory. Numerical analysis further shows that ladders containing several identical bypasses can only linearly transform the input drop spacing. Finally, we find that ladders with specific combinations of vertical and slanted bypasses can generate non-linear transformation of input drop spacing, despite the absence of drop decision-making events at the bypass junctions.

  5. Intentional and accidental paracetamol poisoning in childhood – a retrospective analysis

    Directory of Open Access Journals (Sweden)

    Katarzyna Kominek

    2015-04-01

    Full Text Available Paracetamol is one of the most commonly used analgesics and antipyretics available without limits as preparations of the OTC group (over the counter drugs. Overdose and poisoning with this drug always brings about the risk of acute hepatic failure. The objective of the study was a retrospective evaluation of patients hospitalized in the Paediatric Clinic during the period 2004–2012 due to poisoning with paracetamol.The analysis covered 44 patients hospitalized in the Paediatric Clinic during 2004–2012 due to poisoning with paracetamol. Patients were divided into three groups: intentional poisonings, accidental poisonings, and drug overdose.During the period of the study, 44 patients aged 2.1–17.1, poisoned with paracetamol, were hospitalized. Among these patients there were 30 (68.2% cases of intentional poisonings, 10 (22.7% of accidental poisonings, and only 4 patients (9.1% were children hospitalized after a paracetamol overdose. The majority of patients in all groups were females (93.3%.Paracetamol intoxication may occur after exceeding a single allowable dose, in the case of intentional poisoning, more rarely after exceeding the daily dose, in the case of intense pain complaints, or in the treatment of persistent fever.Based on the analysis performed, an increase was observed in the frequency of poisoning with paracetamol, especially intentional poisoning. Unlimited access to paracetamol as an OTC drug should be reconsidered.

  6. Accidentes atendidos en un área básica de salud de girona, españa

    Directory of Open Access Journals (Sweden)

    Soriano Suárez Elena

    2002-01-01

    Full Text Available Fundamentos: Los accidentes constituyen una patología poco estudiada en el ámbito de la Atención Primaria. Son una de las consultas más frecuentes en los servicios de urgencias y los Centros de Atención Primaria realizan la primera asistencia a la mayoría de los accidentados. Conocer la incidencia y las características clínico-epidemiológicas de los accidentes atendidos en una Área Básica de Salud puede aportar información sobre cuáles pueden ser susceptibles de actividades de prevención. Métodos: Diseño: estudio descriptivo. Emplazamiento: atención primaria. Muestra: todos los pacientes (389 que fueron atendidos por accidente en el Centro de Atención Primaria, entre octubre-98 y mayo-99. Variables: edad, sexo, lugar del accidente, tipo de lesión, localización, agentes implicados, intencionalidad, pruebas complementarias, tratamiento y derivación. Análisis estadísticos: estimación de medias, desviación estándar, estimación de proporciones e intervalos de confianza del 95%. Resultados: Incidencia: 4,1% (IC95%: 3,7-4,5%. Sexo: varones 59% (IC95%:54,2-64% y mujeres 40,9% (IC95%: 36-45,8%. Edad: menores de 20 años, el 50,4% (IC95%:45,4-55,4%;.Actividad de mayor accidentalidad: ocio 24,4% (IC95%: 20,2-28,7%. Lugar: hogar 36,2% (IC95%: 31,5-41%. Lesión más frecuente: contusiones 39,6% (IC95%:34,7-44,4%.Localización más frecuente: extremidad superior 37,5% (IC95%: 32,7-42,3%; Agente mayoritariamente implicado: herramientas y máquinas: 15,9% (IC95%:12,3-19,6%. El 92,2% (IC95%: 89,3-94,7% fueron casuales. Tipo de visita: el 83,3% (IC95%: 79,6-87% fueron atendidos con carácter urgente; el 79,5% (IC95%:75,4-83,5% recibió tratamiento con cura y/o fármacos. El 9,8% (IC95%:6,8-12,7% requirió derivación hospitalaria, Un 13,3% (IC95%: 0-16,7% requirió pruebas complementarias. Conclusiones: El mayor porcentaje de accidentalidad se da en población joven, por lo que se evidencia la necesidad de incorporar intervenciones de

  7. Superheated drop, open-quotes Bubbleclose quotes, dosimeters

    International Nuclear Information System (INIS)

    Harper, M.J.; Lindler, K.W.; Nelson, M.E.; Johnson, T.L.; Jones, C.R.; Rabovsky, J.L.; Rao, N.; Kerschner, H.F.; Reil, G.K.; Schwartz, R.B.

    1991-01-01

    Superheated Drop Dosimeters (SDD) offer a sensitive, immediate measure of the neutron dose equivalent, but their dynamic range is limited and their response varies with temperature, pressure, and vibration. They contain thousands of superheated liquid drops in a stabilizing matrix. High linear energy transfer (LET) radiation triggers vaporization of the drops into visible bubbles. If the matrix is a liquid, the bubbles slowly rise, and the number present indicates the dose rate. Dose may be measured by displacement of the matrix, or by counting the sounds of vaporization. If the matrix is a gel, the bubbles are fixed, and their number is proportional to the dose equivalent. Our research has focused on modeling and elimination of the environmental response, extension of the dynamic range, and tests and evaluations of prototype devices

  8. Fundamentals and applications of fast micro-drop impact

    NARCIS (Netherlands)

    Visser, C.W.

    2014-01-01

    3D-printing, biofabrication, diesel engines, and spray cleaning all depend on controlled drop impact. However, surprisingly, these drops have received scarce attention so far. This is mainly due to their small size and high impact velocity, which makes visualizing the impact a challenge. This thesis

  9. Research progress in study of accidental hypothermia

    Directory of Open Access Journals (Sweden)

    Rui YUAN

    2016-04-01

    Full Text Available Accidental hypothermia refers to a state of lowering of core body temperature down to 35 ℃induced by drowning, burial in snow and prolonged exposure to cold environment, etc. Hypothermia may affect the cardiovascular system, respiratory system, digestive system, etc. The triad consisting "hypothermia, acidosis and coagulopathy" is an important factor accelerating the death of patients. Early, timely application of rewarming measures is regarded as the basic principle in treatment of hypothermia. A series of rewarming measures, such as infusion of warm fluids, inspiration of warm air, abdominal infusion of warm fluid, instruction of warm fluid into pleural cavity, intravenous infusion of warm fluid, rewarming through ECMO, etc. have been used recently. Advance in research on the classification of hypothermia, its impact to the body and the treatment methods are reviewed in present paper. DOI: 10.11855/j.issn.0577-7402.2016.04.15

  10. Fatal accidental inhalation of brake cleaner aerosols.

    Science.gov (United States)

    Veit, F; Martz, W; Birngruber, C G; Dettmeyer, R B

    2018-04-23

    Brake cleaner liquid is commonly used for cleaning of engines and motor parts. The commercially available products usually contain mainly volatile organic compounds. As a consequence brake cleaner evaporates fast and almost completely from the cleaned surface. This case report presents a fatal accidental inhalation of brake cleaner liquid aerosols due to the attempted cleaning of a boat engine. A 16year old boy was found lifeless in the engine compartment of a boat engine. In close proximity to the body, the police found cleanings wipes soaked with brake cleaner as well as a pump spray bottle filled with brake cleaner. Essentially the autopsy revealed a cerebral oedema with encephalomalacia, no coagulated blood as well as increased blood and tissue fluid content of the lung. Toxicological analysis revealed brake cleaner fluid in the lung, gastric content and heart blood. Copyright © 2018 Elsevier B.V. All rights reserved.

  11. Drop-out probabilities of IrisPlex SNP alleles

    DEFF Research Database (Denmark)

    Andersen, Jeppe Dyrberg; Tvedebrink, Torben; Mogensen, Helle Smidt

    2013-01-01

    In certain crime cases, information about a perpetrator's phenotype, including eye colour, may be a valuable tool if no DNA profile of any suspect or individual in the DNA database matches the DNA profile found at the crime scene. Often, the available DNA material is sparse and allelic drop-out...... of true alleles is possible. As part of the validation of the IrisPlex assay in our ISO17025 accredited, forensic genetic laboratory, we estimated the probability of drop-out of specific SNP alleles using 29 and 30 PCR cycles and 25, 50 and 100 Single Base Extension (SBE) cycles. We observed no drop-out...... when the amount of DNA was greater than 125 pg for 29 cycles of PCR and greater than 62 pg for 30 cycles of PCR. With the use of a logistic regression model, we estimated the allele specific probability of drop-out in heterozygote systems based on the signal strength of the observed allele...

  12. DropBot: An open-source digital microfluidic control system with precise control of electrostatic driving force and instantaneous drop velocity measurement

    International Nuclear Information System (INIS)

    Fobel, Ryan; Fobel, Christian; Wheeler, Aaron R.

    2013-01-01

    We introduce DropBot: an open-source instrument for digital microfluidics (http://microfluidics.utoronto.ca/dropbot). DropBot features two key functionalities for digital microfluidics: (1) real-time monitoring of instantaneous drop velocity (which we propose is a proxy for resistive forces), and (2) application of constant electrostatic driving forces through compensation for amplifier-loading and device capacitance. We anticipate that this system will enhance insight into failure modes and lead to new strategies for improved device reliability, and will be useful for the growing number of users who are adopting digital microfluidics for automated, miniaturized laboratory operation.

  13. Biological dosimetry after criticality accidents. Intercomparison exercise in the Silene Reactor - France; Dosimetria biologica en accidentes de criticidad. Ejercicio de intercomparacion en el Reactor Silene - Francia

    Energy Technology Data Exchange (ETDEWEB)

    Di Giorgio, Marina; Vallerga, Maria B; Taja, Maria R [Autoridad Regulatoria Nuclear, Buenos Aires (Argentina); arn gov ar, E-mail: mdigiorg@cae

    2004-07-01

    The Institute of Radiation Protection and Nuclear Safety Institute (IRSN) organized an international biological dosimetry intercomparison, at the SILENE experimental reactor (Valduc, France), simulating different criticality scenarios: bare source 4 Gy, lead shield source 1 and 2 Gy and gamma pure {sup 60}Co source 2 Gy. Fifteen laboratories were involved in this exercise, including the Argentine Biological Dosimetry Laboratory. The purposes of the intercomparison were: 1) To compare the unstable chromosome aberration (UCA) frequency observed by the different laboratories; and 2) To compare the dose estimation for gamma rays and neutrons. The objects of the present work were: I) To compare the mean frequency of UCA observed by the Argentine laboratory with the mean frequency observed by the participant laboratories as a whole. II) To compare the dose estimates performed by the Argentine lab with those estimated by the other laboratories involved in the second stage of the intercomparison. Overall, the mean frequencies of UCA and the correspondent 95% confidence limits obtained by the Argentine lab were consistent with the results obtained by the laboratories as a whole. For the gamma pure scenario, smaller variations were observed among laboratories in terms of dose (CV=18,2%) than in terms of frequency (CV=30,1%). For the mixed field scenarios, only four laboratories, including the Argentine lab, estimated gamma and neutron components of the total dose and just two (Argentine lab and lab 12) were in agreement with the given physical doses. The 1 Gy experiment presented lesser variations both in terms of frequency and dose than the other two scenarios. For the 4 and 2 Gy experiments, variations in neutron dose were more significant than variations in gamma dose, related to the magnitude of the dose. The results suggest that intercomparison exercises jointly with the accreditation of biological dosimetry by cytogenetic service laboratories, in compliance with ISO

  14. Magnetohydrodynamic pressure drop in a quickly changing magnetic field

    International Nuclear Information System (INIS)

    Xu, Z.Y.; Chen, J.M.; Qian, J.P.; Jiang, W.H.; Pan, C.J.; Li, W.Z.

    1995-01-01

    The magnetohydrodynamic (MHD) pressure drop of 22 Na 78 K flow in a circular duct was measured under a quickly changing magnetic field. The MHD pressure drop reduced with time as the magnetic field strength decreased. However, the dimensionless pressure drop gradient varied with the interaction parameter and had a higher value in the middle of the range of values of the interaction parameter. Therefore, a quickly changing magnetic field is harmful to the structural material in a liquid metal self-cooled blanket of a fusion reactor, since the greater pressure drop gradient may cause a larger stress in the blanket. This is even more harmful if the magnetic field strength decreases very quickly or its distribution in space is greatly non-uniform. (orig.)

  15. Hydrodynamic shrinkage of liquid CO2 Taylor drops in a straight microchannel

    Science.gov (United States)

    Qin, Ning; Wen, John Z.; Ren, Carolyn L.

    2018-03-01

    Hydrodynamic shrinkage of liquid CO2 drops in water under a Taylor flow regime is studied using a straight microchannel (length/width ~100). A general form of a mathematical model of the solvent-side mass transfer coefficient (k s) is developed first. Based on formulations of the surface area (A) and the volume (V) of a general Taylor drop in a rectangular microchannel, a specific form of k s is derived. Drop length and speed are experimentally measured at three specified positions of the straight channel, namely, immediately after drop generation (position 1), the midpoint of the channel (position 2) and the end of the channel (position 3). The reductions of drop length (L x , x  =  1, 2, 3) from position 1 to 2 and down to 3 are used to quantify the drop shrinkage. Using the specific model, k s is calculated mainly based on L x and drop flowing time (t). Results show that smaller CO2 drops produced by lower flow rate ratios ({{Q}LC{{O2}}}/{{Q}{{H2}O}} ) are generally characterized by higher (nearly three times) k s and Sherwood numbers than those produced by higher {{Q}LC{{O2}}}/{{Q}{{H2}O}} , which is essentially attributed to the larger effective portion of the smaller drop contributing in the mass transfer under same levels of the flowing time and the surface-to-volume ratio (~104 m-1) of all drops. Based on calculated pressure drops of the segmented flow in microchannel, the Peng-Robinson equation of state and initial pressures of drops at the T-junction in experiments, overall pressure drop (ΔP t) in the straight channel as well as the resulted drop volume change are quantified. ΔP t from position 1-3 is by average 3.175 kPa with a ~1.6% standard error, which only leads to relative drop volume changes of 0.3‰ to 0.52‰.

  16. Hydrodynamic shrinkage of liquid CO2 Taylor drops in a straight microchannel.

    Science.gov (United States)

    Qin, Ning; Wen, John; Ren, Carolyn L

    2018-01-16

    Hydrodynamic shrinkage of liquid CO2 drops in water under a Taylor flow regime is studied using a straight microchannel (length/width ~ 100). A general form of a mathematical model of the solvent-side mass transfer coefficient (ks) is developed first. Based on formulations of the surface area (A) and the volume (V) of a general Taylor drop in a rectangular microchannel, a specific form of ks is derived. Drop length and speed are experimentally measured at three specified positions of the straight channel, namely, immediately after drop generation (position 1), the midpoint of the channel (position 2) and the end of the channel (position 3). The reductions of drop length (Lx, x = 1, 2, 3) from position 1 to 2 and down to 3 are used to quantify the drop shrinkage. Using the specific model, ks is calculated mainly based on Lx and drop flowing time (t). Results show that smaller CO2 drops produced by lower flow rate ratios (QLCO2/QH2O) are generally characterized by higher (nearly three times) ks and Sherwood numbers than those produced by higher QLCO2/QH2O, which is essentially attributed to the larger effective portion of the smaller drop contributing in the mass transfer under same levels of the flowing time and the surface-to-volume ratio (~ 104 m-1) of all drops. Based on calculated pressure drops of the segmented flow in microchannel, the Peng-Robinson equation of state (EOS) and initial pressures of drops at the T-junction in experiments, overall pressure drop (ΔPt) in the straight channel as well as the resulted drop volume change are quantified. ΔPt from position 1 to 3 is by average 3.175 kPa with a ~1.6% standard error, which only leads to relative drop volume changes of 0.3‰ to 0.52‰. © 2018 IOP Publishing Ltd.

  17. Impact of ultra-viscous drops: air-film gliding and extreme wetting

    KAUST Repository

    Langley, Kenneth

    2017-01-23

    A drop impacting on a solid surface must push away the intervening gas layer before making contact. This entails a large lubricating air pressure which can deform the bottom of the drop, thus entrapping a bubble under its centre. For a millimetric water drop, the viscous-dominated flow in the thin air layer counteracts the inertia of the drop liquid. For highly viscous drops the viscous stresses within the liquid also affect the interplay between the drop and the gas. Here the drop also forms a central dimple, but its outer edge is surrounded by an extended thin air film, without contacting the solid. This is in sharp contrast with impacts of lower-viscosity drops where a kink in the drop surface forms at the edge of the central disc and makes a circular contact with the solid. Larger drop viscosities make the central air dimple thinner. The thin outer air film subsequently ruptures at numerous random locations around the periphery, when it reaches below 150 nm thickness. This thickness we measure using high-speed two-colour interferometry. The wetted circular contacts expand rapidly, at orders of magnitude larger velocities than would be predicted by a capillary-viscous balance. The spreading velocity of the wetting spots is independent of the liquid viscosity. This may suggest enhanced slip of the contact line, assisted by rarefied-gas effects, or van der Waals forces in what we call extreme wetting. Myriads of micro-bubbles are captured between the local wetting spots.

  18. Pressure drop in flashing flow through obstructions

    International Nuclear Information System (INIS)

    Weinle, M.E.; Johnston, B.S.

    1985-01-01

    An experiment was designed to investigate the pressure drop for flashing flow across obstructions of different geometries at various flow rates. Tests were run using two different orifices to determine if the two-phase pressure drop could be characterized by the single phase loss coefficient and the general behavior of the two-phase multiplier. For the geometries studied, it was possible to correlate the multiplier in a geometry-independent fashion

  19. Pressure drop in T's in concentric ducts

    International Nuclear Information System (INIS)

    Shock, R.A.W.

    1983-02-01

    A set of experiments has been carried out to measure the pressure drop characteristics of single-phase flow in dividing and joining right-angled T's in a concentric ducting system. These have been compared with measured pressure drops in a simple round tube system. In most tests with the concentric system the number of velocity heads lost is either similar to, or more than, the value for the round tubes. (author)

  20. O the Electrohydrodynamics of Drop Extraction from a Conductive Liquid Meniscus

    Science.gov (United States)

    Wright, Graham Scott

    This thesis is concerned with the use of an electric field in the extraction of liquid drops from a capillary orifice or nozzle. The motivating application is ink jet printing. Current drop-on-demand ink jets use pressure pulses to eject drops. Literature on electrostatic spraying suggests that by using an electric field, drops could be produced with a wider range of sizes and speeds than is possible with pressure ejection. Previous efforts to apply electric spraying to printing or similar selective coating tasks have taken an experimental approach based on steady or periodic spraying phenomena, without attempting cycle -by-cycle drop control. The centerpiece of this thesis is a simulation tool developed to explore such possibilities. A simplified analytic model is developed as a preliminary step, yielding formulas for force and time scales that provide an appropriate basis for nondimensionalization of the governing differential equations; important dimensionless parameters are identified. The complete self-consistent model permits simulation of meniscus behavior under time -varying applied voltage or pressure, with the electric field solution continually updated as the surface changes shape. The model uses a quasi-one-dimensional hydrodynamic formulation and a two-dimensional axisymmetric boundary element solution for the electric field. The simulation is checked against experimental results for meniscus stability, resonant modes, and drop emission under electric field. The simulation faithfully captures important qualitative aspects of meniscus behavior and gives reasonable quantitative agreement within the limitations of the model. Insights gained in simulation point the way to a successful laboratory demonstration of drop extraction using a shaped voltage pulse. Drop size control is pursued in simulation using pressure and voltage pulses both alone and in combination, for both light and viscous liquids. Combining pressure and field pulses is shown to be