Accident sequences simulated at the Juragua nuclear power plant

International Nuclear Information System (INIS)

Carbajo, J.J.

1998-01-01

Different hypothetical accident sequences have been simulated at Unit 1 of the Juragua nuclear power plant in Cuba, a plant with two VVER-440 V213 units under construction. The computer code MELCOR was employed for these simulations. The sequences simulated are: (1) a design-basis accident (DBA) large loss of coolant accident (LOCA) with the emergency core coolant system (ECCS) on, (2) a station blackout (SBO), (3) a small LOCA (SLOCA) concurrent with SBO, (4) a large LOCA (LLOCA) concurrent with SBO, and (5) a LLOCA concurrent with SBO and with the containment breached at time zero. Timings of important events and source term releases have been calculated for the different sequences analyzed. Under certain weather conditions, the fission products released from the severe accident sequences may travel to southern Florida

Application of the accident management information needs methodology to a severe accident sequence

International Nuclear Information System (INIS)

Ward, L.W.; Hanson, D.J.; Nelson, W.R.; Solberg, D.E.

1989-01-01

The U.S. Nuclear Regulatory Commission (NRC) is conducting an Accident Management Research Program that emphasizes the application of severe accident research results to enhance the capability of plant operating personnel to effectively manage severe accidents. A methodology to identify and assess the information needs of the operating staff of a nuclear power plant during a severe accident has been developed as part of the research program designed to resolve this issue. The methodology identifies the information needs of the plant personnel during a wide range of accident conditions, the existing plant measurements capable of supplying these information needs and what, if any minor additions to instrument and display systems would enhance the capability to manage accidents, known limitations on the capability of these measurements to function properly under the conditions that will be present during a wide range of severe accidents, and areas in which the information systems could mislead plant personnel. This paper presents an application of this methodology to a severe accident sequence to demonstrate its use in identifying the information which is available for management of the event. The methodology has been applied to a severe accident sequence in a Pressurized Water Reactor with a large dry containment. An examination of the capability of the existing measurements was then performed to determine whether the information needs can be supplied

Categorization of PWR accident sequences and guidelines for fault trees: seismic initiators

International Nuclear Information System (INIS)

Kimura, C.Y.

1984-09-01

This study developed a set of dominant accident sequences that could be applied generically to domestic commercial PWRs as a standardized basis for a probabilistic seismic risk assessment. This was accomplished by ranking the Zion 1 accident sequences. The pertinent PWR safety systems were compared on a plant-by-plant basis to determine the applicability of the dominant accident sequences of Zion 1 to other PWR plants. The functional event trees were developed to describe the system functions that must work or not work in order for a certain accident sequence to happen, one for pipe breaks and one for transients

Overview of BWR Severe Accident Sequence Analyses at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Hodge, S.A.

1983-01-01

Since its inception in October 1980, the Severe Accident Sequence Analysis (SASA) program at Oak Ridge National Laboratory (ORNL) has completed four studies including Station Blackout, Scram Discharge Volume Break, Loss of Decay Heat Removal, and Loss of Injection accident sequences for the Browns Ferry Nuclear Plant. The accident analyses incorporated in a SASA study provide much greater detail than that practically achievable in a Probabilistic Risk Assessment (PRA). When applied to the candidate dominant accident sequences identified by a PRA, the detailed SASA results determine if factors neglected by the PRA would have a significant effect on the order of dominant sequences. Ongoing SASA work at ORNL involves the analysis of Anticipated Transients Without Scram (ATWS) sequences for Browns Ferry

Risk evaluation method for faults by engineering approach. (2) Application concept of margin analysis utilizing accident sequences

International Nuclear Information System (INIS)

Kamiya, Masanobu; Kanaida, Syuuji; Kamiya, Kouichi; Sato, Kunihiko; Kuroiwa, Katsuya

2016-01-01

The influence of the fault displacement on the facility should to be evaluated not only by the activity of the fault but also by obtaining risk information by considering scenarios including such as the frequency and the degree of the hazard, which should be an appropriate approach for nuclear safety. An applicable concept of margin analysis utilizing accident sequences for evaluating the influence of the fault displacement is proposed. By use of this analysis, we can evaluate of the safety functions and margin for core damage, verify the efficiency of equipment of portable type and make a decision to take additional measures to reduce the risk by using obtained risk information. (author)

Accident sequence analysis of human-computer interface design

International Nuclear Information System (INIS)

Fan, C.-F.; Chen, W.-H.

2000-01-01

It is important to predict potential accident sequences of human-computer interaction in a safety-critical computing system so that vulnerable points can be disclosed and removed. We address this issue by proposing a Multi-Context human-computer interaction Model along with its analysis techniques, an Augmented Fault Tree Analysis, and a Concurrent Event Tree Analysis. The proposed augmented fault tree can identify the potential weak points in software design that may induce unintended software functions or erroneous human procedures. The concurrent event tree can enumerate possible accident sequences due to these weak points

Probabilistic studies of accident sequences

International Nuclear Information System (INIS)

Villemeur, A.; Berger, J.P.

1986-01-01

For several years, Electricite de France has carried out probabilistic assessment of accident sequences for nuclear power plants. In the framework of this program many methods were developed. As the interest in these studies was increasing and as adapted methods were developed, Electricite de France has undertaken a probabilistic safety assessment of a nuclear power plant [fr

Development of an accident sequence precursor methodology and its application to significant accident precursors

Energy Technology Data Exchange (ETDEWEB)

Jang, Seung Hyun; Park, Sung Hyun; Jae, Moo Sung [Dept. of of Nuclear Engineering, Hanyang University, Seoul (Korea, Republic of)

2017-03-15

The systematic management of plant risk is crucial for enhancing the safety of nuclear power plants and for designing new nuclear power plants. Accident sequence precursor (ASP) analysis may be able to provide risk significance of operational experience by using probabilistic risk assessment to evaluate an operational event quantitatively in terms of its impact on core damage. In this study, an ASP methodology for two operation mode, full power and low power/shutdown operation, has been developed and applied to significant accident precursors that may occur during the operation of nuclear power plants. Two operational events, loss of feedwater and steam generator tube rupture, are identified as ASPs. Therefore, the ASP methodology developed in this study may contribute to identifying plant risk significance as well as to enhancing the safety of nuclear power plants by applying this methodology systematically.

Severe accident sequences simulated at the Grand Gulf Nuclear Station

International Nuclear Information System (INIS)

Carbajo, J.J.

1999-01-01

Different severe accident sequences employing the MELCOR code, version 1.8.4 QK, have been simulated at the Grand Gulf Nuclear Station (Grand Gulf). The postulated severe accidents simulated are two low-pressure, short-term, station blackouts; two unmitigated small-break (SB) loss-of-coolant accidents (LOCAs) (SBLOCAs); and one unmitigated large LOCA (LLOCA). The purpose of this study was to calculate best-estimate timings of events and source terms for a wide range of severe accidents and to compare the plant response to these accidents

The Accident Sequence Precursor program: Methods improvements and current results

International Nuclear Information System (INIS)

Minarick, J.W.; Manning, F.M.; Harris, J.D.

1987-01-01

Changes in the US NRC Accident Sequence Precursor program methods since the initial program evaluations of 1969-81 operational events are described, along with insights from the review of 1984-85 events. For 1984-85, the number of significant precursors was consistent with the number observed in 1980-81, dominant sequences associated with significant events were reasonably consistent with PRA estimates for BWRs, but lacked the contribution due to small-break LOCAs previously observed and predicted in PWRs, and the frequency of initiating events and non-recoverable system failures exhibited some reduction compared to 1980-81. Operational events which provide information concerning additional PRA modeling needs are also described

Fukushima. The accident sequence and important causes. Pt. 1/3

International Nuclear Information System (INIS)

Pistner, Christoph

2013-01-01

On March 11, 2011 a strong earthquake at the east coast of Japan and a subsequent tsunami caused severe damage at the NPP site of Fukushima Daiichi. The article covers the fundamental safety aspects of the accident progress according to the state of knowledge. The principles of nuclear technology and reactor safety are summarized in order to allow the understanding of the accidental sequence. Even two years after the disaster many questions on the sequence of accident events are still open.

A study on hydrogen deflagration for selected severe accident sequences in Ringhals 3

Energy Technology Data Exchange (ETDEWEB)

Gustavsson, V.; Moeller, E. [SwedPower AB (Sweden)

2002-01-01

In this report, we have investigated the most important severe accident sequences in Ringhals 3, a Westinghouse 3-loop PWR, concerning hydrogen generation and containment pressure at hydrogen deflagration. In order to analyze the accident sequences and to calculate the hydrogen production, the computer code MAAP (Modular Accident Analysis Program) was used. Six accident sequences were studied, where four were LOCA cases and two transients. MAAP gives the evolution of the accident and particularly the pressure in the containment and the production of hydrogen as a function of time. The pressure peaks at deflagration were calculated by the method AICC-Adiabatic Isochoric Complete Combustion. The results from these calculations are conservative for two reasons. Adiabatic combustion means that the heat losses to structures in the containment are neglected. The combustion is also assumed to occur once and all available hydrogen is burned. The maximum pressure in five analysed cases was compared with the failure pressure of the containment. In the LOCA case, 373 kg hydrogen was burned and the resulting peak pressure in the containment was 0,53 MPa. In the transient, where 720 kg hydrogen was burned, the peak pressure was 0,69 MPa. This is the same as the failure pressure of the containment. Finally, in the conservative case, 980 kg hydrogen was burned and the resulting peak pressure 0,96 MPa. However, it should be noted that these conclusions are conservative from two points of view. Firstly a more realistic (than AICC) calculation of the peak pressure would give a lower value than 0,69 MPa. Secondly, there is conservatism in the evaluation of the failure pressure. (au)

Containment response to a severe accident (TMLB sequence) with and without mitigation strategies

International Nuclear Information System (INIS)

Passalacqua, R.

2004-01-01

A loss of SG feed-water (TMLB sequence) for a prototypic PWR 900 MWe with a multi-compartment configuration (with 11 and 16 cells nodalization) has been calculated by the author using the ASTEC code in the frame of the EVITA project (5th Framework Programme, FWP). A variety of hypothesis (e.g. activation of sprays and hydrogen recombiners) and possible consequences of these assumptions (cavity flooding, hydrogen combustion, etc.) have been made in order to evaluate the global reactor containment building response (pressure, aerosol/FP concentration, etc.). The need to dispose of severe accident management guidelines (SAMGs) is increasing. These guidelines are meant for nuclear plants' operators in order to allow them to apply mitigation strategies all along a severe accident, which, only in its initial phase, may last several days. The purpose of this paper is to outline the influence on the containment load of most common accident occurrences and operators actions, which is essential in establishing SAMGs. ASTEC (Accident Source Term Evaluation Code) is a computer code for the evaluation of the consequences of a postulated nuclear plant severe accident sequence. ASTEC is a computer tool currently under joint development by the Institut de Radioprotection et de Surete Nucleaire (IRSN), France, and Gesellschaft fuer Anlagen-und Reaktorsicherheit (GRS), Germany. The aim of the development is to create a fast running integral code package, reliable in all simulations of a severe accident, to be used for level-2 PSA analysis. It must be said that several recent developments have significantly improved the best-estimate models of ASTEC and a new version (ASTEC V1.0) has been released mid-2002. Nevertheless, the somehow obsolete ASTECv0.3 version here used, has given results very useful for the estimation of the global risk of a nuclear plant. Moreover, under the current 6th FWP (Sustainable Integration of EU Research on Severe Accident Phenomenology and Management), the

BWR severe accident sequence analyses at ORNL - some lessons learned

International Nuclear Information System (INIS)

Hodge, S.A.

1983-01-01

Boiling water reactor severe accident sequence studies are being carried out using Browns Ferry Unit 1 as the model plant. Four accident studies were completed, resulting in recommendations for improvements in system design, emergency procedures, and operator training. Computer code improvements were an important by-product

Human factors review for Severe Accident Sequence Analysis (SASA)

International Nuclear Information System (INIS)

Krois, P.A.; Haas, P.M.; Manning, J.J.; Bovell, C.R.

1984-01-01

The paper will discuss work being conducted during this human factors review including: (1) support of the Severe Accident Sequence Analysis (SASA) Program based on an assessment of operator actions, and (2) development of a descriptive model of operator severe accident management. Research by SASA analysts on the Browns Ferry Unit One (BF1) anticipated transient without scram (ATWS) was supported through a concurrent assessment of operator performance to demonstrate contributions to SASA analyses from human factors data and methods. A descriptive model was developed called the Function Oriented Accident Management (FOAM) model, which serves as a structure for bridging human factors, operations, and engineering expertise and which is useful for identifying needs/deficiencies in the area of accident management. The assessment of human factors issues related to ATWS required extensive coordination with SASA analysts. The analysis was consolidated primarily to six operator actions identified in the Emergency Procedure Guidelines (EPGs) as being the most critical to the accident sequence. These actions were assessed through simulator exercises, qualitative reviews, and quantitative human reliability analyses. The FOAM descriptive model assumes as a starting point that multiple operator/system failures exceed the scope of procedures and necessitates a knowledge-based emergency response by the operators. The FOAM model provides a functionally-oriented structure for assembling human factors, operations, and engineering data and expertise into operator guidance for unconventional emergency responses to mitigate severe accident progression and avoid/minimize core degradation. Operators must also respond to potential radiological release beyond plant protective barriers. Research needs in accident management and potential uses of the FOAM model are described. 11 references, 1 figure

The tsunami probabilistic risk assessment (PRA). Example of accident sequence analysis of tsunami PRA according to the standard for procedure of tsunami PRA for nuclear power plants

International Nuclear Information System (INIS)

Ohara, Norihiro; Hasegawa, Keiko; Kuroiwa, Katsuya

2013-01-01

After the Fukushima Daiichi nuclear power plant (NPP) accident, standard for procedure of tsunami PRA for NPP had been established by the Standardization Committee of AESJ. Industry group had been conducting analysis of Tsunami PRA for PWR based on the standard under the cooperation with electric utilities. This article introduced overview of the standard and examples of accident sequence analysis of Tsunami PRA studied by the industry group according to the standard. The standard consisted of (1) investigation of NPP's composition, characteristics and site information, (2) selection of relevant components for Tsunami PRA and initiating events and identification of accident sequence, (3) evaluation of Tsunami hazards, (4) fragility evaluation of building and components and (5) evaluation of accident sequence. Based on the evaluation, countermeasures for further improvement of safety against Tsunami could be identified by the sensitivity analysis. (T. Tanaka)

Cernavoda CANDU severe accident evaluation

International Nuclear Information System (INIS)

Negut, G.; Marin, A.

1997-01-01

The papers present the activities dedicated to Romania Cernavoda Nuclear Power Plant first CANDU Unit severe accident evaluation. This activity is part of more general PSA assessment activities. CANDU specific safety features are calandria moderator and calandria vault water capabilities to remove the residual heat in the case of severe accidents, when the conventional heat sinks are no more available. Severe accidents evaluation, that is a deterministic thermal hydraulic analysis, assesses the accidents progression and gives the milestones when important events take place. This kind of assessment is important to evaluate to recovery time for the reactor operators that can lead to the accident mitigation. The Cernavoda CANDU unit is modeled for the of all heat sinks accident and results compared with the AECL CANDU 600 assessment. (orig.)

Human factors review for nuclear power plant severe accident sequence analysis

International Nuclear Information System (INIS)

Krois, P.A.; Haas, P.M.

1985-01-01

The paper discusses work conducted to: (1) support the severe accident sequence analysis of a nuclear power plant transient based on an assessment of operator actions, and (2) develop a descriptive model of operator severe accident management. Operator actions during the transient are assessed using qualitative and quantitative methods. A function-oriented accident management model provides a structure for developing technical operator guidance on mitigating core damage preventing radiological release

Accident sequence precursor analysis level 2/3 model development

International Nuclear Information System (INIS)

Lui, C.H.; Galyean, W.J.; Brownson, D.A.

1997-01-01

The US Nuclear Regulatory Commission's Accident Sequence Precursor (ASP) program currently uses simple Level 1 models to assess the conditional core damage probability for operational events occurring in commercial nuclear power plants (NPP). Since not all accident sequences leading to core damage will result in the same radiological consequences, it is necessary to develop simple Level 2/3 models that can be used to analyze the response of the NPP containment structure in the context of a core damage accident, estimate the magnitude of the resulting radioactive releases to the environment, and calculate the consequences associated with these releases. The simple Level 2/3 model development work was initiated in 1995, and several prototype models have been completed. Once developed, these simple Level 2/3 models are linked to the simple Level 1 models to provide risk perspectives for operational events. This paper describes the methods implemented for the development of these simple Level 2/3 ASP models, and the linkage process to the existing Level 1 models

Application of MELCOR Code to a French PWR 900 MWe Severe Accident Sequence and Evaluation of Models Performance Focusing on In-Vessel Thermal Hydraulic Results

International Nuclear Information System (INIS)

De Rosa, Felice

2006-01-01

In the ambit of the Severe Accident Network of Excellence Project (SARNET), funded by the European Union, 6. FISA (Fission Safety) Programme, one of the main tasks is the development and validation of the European Accident Source Term Evaluation Code (ASTEC Code). One of the reference codes used to compare ASTEC results, coming from experimental and Reactor Plant applications, is MELCOR. ENEA is a SARNET member and also an ASTEC and MELCOR user. During the first 18 months of this project, we performed a series of MELCOR and ASTEC calculations referring to a French PWR 900 MWe and to the accident sequence of 'Loss of Steam Generator (SG) Feedwater' (known as H2 sequence in the French classification). H2 is an accident sequence substantially equivalent to a Station Blackout scenario, like a TMLB accident, with the only difference that in H2 sequence the scram is forced to occur with a delay of 28 seconds. The main events during the accident sequence are a loss of normal and auxiliary SG feedwater (0 s), followed by a scram when the water level in SG is equal or less than 0.7 m (after 28 seconds). There is also a main coolant pumps trip when ΔTsat < 10 deg. C, a total opening of the three relief valves when Tric (core maximal outlet temperature) is above 603 K (330 deg. C) and accumulators isolation when primary pressure goes below 1.5 MPa (15 bar). Among many other points, it is worth noting that this was the first time that a MELCOR 1.8.5 input deck was available for a French PWR 900. The main ENEA effort in this period was devoted to prepare the MELCOR input deck using the code version v.1.8.5 (build QZ Oct 2000 with the latest patch 185003 Oct 2001). The input deck, completely new, was prepared taking into account structure, data and same conditions as those found inside ASTEC input decks. The main goal of the work presented in this paper is to put in evidence where and when MELCOR provides good enough results and why, in some cases mainly referring to its

Phenomenological uncertainty analysis of containment building pressure load caused by severe accident sequences

International Nuclear Information System (INIS)

Park, S.Y.; Ahn, K.I.

2014-01-01

Highlights: • Phenomenological uncertainty analysis has been applied to level 2 PSA. • The methodology provides an alternative to simple deterministic analyses and sensitivity studies. • A realistic evaluation provides a more complete characterization of risks. • Uncertain parameters of MAAP code for the early containment failure were identified. - Abstract: This paper illustrates an application of a severe accident analysis code, MAAP, to the uncertainty evaluation of early containment failure scenarios employed in the containment event tree (CET) model of a reference plant. An uncertainty analysis of containment pressure behavior during severe accidents has been performed for an optimum assessment of an early containment failure model. The present application is mainly focused on determining an estimate of the containment building pressure load caused by severe accident sequences of a nuclear power plant. Key modeling parameters and phenomenological models employed for the present uncertainty analysis are closely related to the in-vessel hydrogen generation, direct containment heating, and gas combustion. The basic approach of this methodology is to (1) develop severe accident scenarios for which containment pressure loads should be performed based on a level 2 PSA, (2) identify severe accident phenomena relevant to an early containment failure, (3) identify the MAAP input parameters, sensitivity coefficients, and modeling options that describe or influence the early containment failure phenomena, (4) prescribe the likelihood descriptions of the potential range of these parameters, and (5) evaluate the code predictions using a number of random combinations of parameter inputs sampled from the likelihood distributions

An analysis of LOCA sequences in the development of severe accident analysis DB

International Nuclear Information System (INIS)

Choi, Young; Park, Soo Yong; Ahn, Kwang-Il; Kim, D.H.

2006-01-01

Although a Level 2 PSA was performed for the Korean Standard Power Plants (KSNPs), and it considered the necessary sequences for an assessment of the containment integrity and source term analysis. In terms of an accident management, however, more cases causing severe core damage need to be analyzed and arranged systematically for an easy access to the results. At present, KAERI is calculating the severe accident sequences intensively for various initiating events and generating a database for the accident progression including thermal hydraulic and source term behaviours. The developed Database (DB) system includes a graphical display for a plant and equipment status, previous research results by knowledge-base technique, and the expected plant behaviour. The plant model used in this paper is oriented to the case of LOCAs related severe accident phenomena and thus can simulate the plant behaviours for a severe accident. Therefore the developed system may play a central role as an information source for decision-making for a severe accident management, and will be used as a training simulator for a severe accident management. (author)

Method for improving accident sequence recognition in nuclear power plant control rooms

International Nuclear Information System (INIS)

Heising, C.D.; Dinsmore, S.C.

1983-01-01

This work adapts fault trees from plant-specific probabilistic risk analyses (PRAs) to construct and quantitatively evaluate an alarm analysis system for the engineered safety features (ESFs). The purpose is to help improve reactor operator recognition and identification of potential accident sequences. The PRA system fault trees provide system failure mode information which can be used to construct alarm trees. These alarm trees provide a framework for assessing the plant indicators so that the plant conditions are made more readily apparent to plant personnel. In the alarm tree, possible states of each instrumented alarem are identified as true or false. In addition, a warning status is defined and integrated into an alarm analysis routine. The impact of this additional status conditioned on the Boolean laws used to evaluate the alarm trees is examined. An application is described for BWR high pressure coolant injection system (HPCI) that would be utilized during many severe reactor accidents

Event sequence quantification for a loss of shutdown cooling accident in the GCFR

International Nuclear Information System (INIS)

Frank, M.; Reilly, J.

1979-10-01

A summary is presented of the core-wide sequence of events of a postulated total loss of forced and natural convection decay heat removal in a shutdown Gas-Cooled Fast Reactor (GCFR). It outlines the analytical methods and results for the progression of the accident sequence. This hypothetical accident proceeds in the distinct phases of cladding melting, assembly wall melting and molten steel relocation into the interassembly spacing, and fuel relocation. It identifies the key phenomena of the event sequence and the concerns and mechanisms of both recriticality and recriticality prevention

Source terms associated with two severe accident sequences in a 900 MWe PWR

International Nuclear Information System (INIS)

Fermandjian, J.; Evrard, J.M.; Berthion, Y.; Lhiaubet, G.; Lucas, M.

1983-12-01

Hypothetical accidents taken into account in PWR risk assessment result in fission product release from the fuel, transfer through the primary circuit, transfer into the reactor containment building (RCB) and finally release to the environment. The objective of this paper is to define the characteristics of the source term (noble gases, particles and volatile iodine forms) released from the reactor containment building during two dominant core-melt accident sequences: S 2 CD and TLB according to the ''Reactor Safety Study'' terminology. The reactor chosen for this study is a French 900 MWe PWR unit. The reactor building is a prestressed concrete containment with an internal liner. The first core-melt accident sequence is a 2-break loss-of-coolant accident on the cold leg, with failure of both system and the containment spray system. The second one is a transient initiated by a loss of offsite and onsite power supply and auxiliary feedwater system. These two sequences have been chosen because they are representative of risk dominant scenarios. Source terms associated with hypothetical core-melt accidents S 2 CD and TLB in a French PWR -900 MWe- have been performed using French computer codes (in particular, JERICHO Code for containment response analysis and AEROSOLS/31 for aerosol behavior in the containment)

The use of influence diagrams for evaluating severe accident management strategies

International Nuclear Information System (INIS)

Jae, M.; Apostolakis, G.E.

1992-01-01

In this paper, the influence diagram, a new analytical tool for developing and evaluating severe accident management strategies, is presented. Influence diagrams are much simpler than decision trees because they do not lead to the large number of branches that are generated when decision trees are used in realistic problems; furthermore, they show explicitly the dependencies between the variables of the problem. One of the accident management strategies proposed for light water reactors, flooding the reactor cavity as a means of preventing vessel breach during a short-term station blackout sequence, is presented. The influence diagram associated with this strategy is constructed. Finally, the advantages of using influence diagrams in accident management are explored

A Preliminary Neutral Framework for the Accident Sequence Evaluation for a Hydrogen Conversion Reactor

International Nuclear Information System (INIS)

Han, Seok Jung; Yang, Joon Eon

2005-01-01

A framework for an early stage PSA for a hydrogen conversion reactor has been proposed in this paper. The approach is based on a functional and top-down approach. A main concerning point of this approach is to use a design neutral framework. A design neutral framework of PSA can provide a flexibility to apply to several candidate design concepts or options. This neutral-framework idea was borrowed from a proposed regulatory framework in US NRC. The feasibility of our proposed approach has been assessed to be applied in an accident sequence analysis for a hydrogen conversion reactor

An evaluation of alternate containment concepts for severe accident sequences: Chapter 3

International Nuclear Information System (INIS)

Ashton, D.H.; Blazo, S.R.

1983-01-01

Over the past several years, numerous design concepts have been developed to enhance the ability of containments to withstand severe reactor accidents. As part of the AIF sponsored IDCOR program, a study has been completed to survey and evaluate these alternate containment design concepts. The study defines the minimum as well as optimum functional and design criteria which any such system must meet. Six concepts which satisfy these criteria are then evaluated based upon factors such as: risk reduction potential, cost, constructability and the potential detrimental effects. Based upon the results of these evaluations, a ranking of the design concepts is developed. The purpose of this paper is to present the results of the IDCOR sponsored study

Prediction of accident sequence probabilities in a nuclear power plant due to earthquake events

International Nuclear Information System (INIS)

Hudson, J.M.; Collins, J.D.

1980-01-01

This paper presents a methodology to predict accident probabilities in nuclear power plants subject to earthquakes. The resulting computer program accesses response data to compute component failure probabilities using fragility functions. Using logical failure definitions for systems, and the calculated component failure probabilities, initiating event and safety system failure probabilities are synthesized. The incorporation of accident sequence expressions allows the calculation of terminal event probabilities. Accident sequences, with their occurrence probabilities, are finally coupled to a specific release category. A unique aspect of the methodology is an analytical procedure for calculating top event probabilities based on the correlated failure of primary events

Assessment of accident risks in the CRBRP. Volume 2. Appendices

Energy Technology Data Exchange (ETDEWEB)

None

1977-03-01

Appendices to Volume I include core-related accident-sequence definition, CRBRP risk-assessment sequence-probability determinations, failure-probability data, accident scenario evaluation, radioactive material release analysis, ex-core accident analysis, safety philosophy and design features, calculation of reactor accident consequences, sensitivity study, and risk from fires.

Use of a fuzzy decision-making method in evaluating severe accident management strategies

International Nuclear Information System (INIS)

Jae, M.; Moon, J.H.

2002-01-01

In developing severe accident management strategies, an engineering decision would be made based on the available data and information that are vague, imprecise and uncertain by nature. These sorts of vagueness and uncertainty are due to lack of knowledge for the severe accident sequences of interest. The fuzzy set theory offers a possibility of handling these sorts of data and information. In this paper, the possibility to apply the decision-making method based on fuzzy set theory to the evaluation of the accident management strategies at a nuclear power plant is scrutinized. The fuzzy decision-making method uses linguistic variables and fuzzy numbers to represent the decision-maker's subjective assessments for the decision alternatives according to the decision criteria. The fuzzy mean operator is used to aggregate the decision-maker's subjective assessments, while the total integral value method is used to rank the decision alternatives. As a case study, the proposed method is applied to evaluating the accident management strategies at a nuclear power plant

Current understanding of the sequence of events. Overview of current understanding of accident progression at Fukushima Dai-ichi

International Nuclear Information System (INIS)

Gulliford, Jim

2013-01-01

An overview of the main sequence of events, particularly the evolution of the cores in Units 1-3 was given. The presentation is based on information provided by Dr Okajima of JAEA to the June 2012 Nuclear Science Committee meeting. During the accident, conditions at the plant were such that operators were initially unable to obtain instruments readouts from the control panel and hence could not know what condition the reactors were in. (Reactor Power, Pressure, Temperature, Water height and flow rate, etc.). Subsequently, as electrical power supplies were gradually restored more data became available. In addition to the reactor data, other information from off-site measurements and from measuring stations inside the site boundary is now available, particularly for radiation dose rates in air. These types of information, combined with detailed knowledge of the plant design and operations history up to the time of the accident are being used to construct detailed computer models which simulate the behaviour of the reactor core, pressure vessel and containment during the accident sequence. This combination of detailed design/operating data, limited measured data during the accident and computer modelling allows us to construct a fairly clear picture of the accident progression. The main sequence of events (common to Units 1, 2 and 3) is summarised. The OECD/NEA is currently coordinating an international benchmark study of the accident at Fukushima Daiichi known as the BSAF Project. The objectives of this activity are to analyse and evaluate the accident progression and improve severe accident (SA) analysis methods and models. The project provides valuable additional (and corrected) data from plant measurements as well as an improved understanding of the role played by the fuel and cladding design. Based on (limited) plant data and extensive modelling analysis, we have a detailed qualitative description of the Fukushima-Daiichi accident. Further analyses of the type

Applicability of simplified methods to evaluate consequences of criticality accident using past accident data

International Nuclear Information System (INIS)

Nakajima, Ken

2003-01-01

Applicability of four simplified methods to evaluate the consequences of criticality accident was investigated. Fissions in the initial burst and total fissions were evaluated using the simplified methods and those results were compared with the past accident data. The simplified methods give the number of fissions in the initial burst as a function of solution volume; however the accident data did not show such tendency. This would be caused by the lack of accident data for the initial burst with high accuracy. For total fissions, simplified almost reproduced the upper envelope of the accidents. However several accidents, which were beyond the applicable conditions, resulted in the larger total fissions than the evaluations. In particular, the Tokai-mura accident in 1999 gave in the largest total specific fissions, because the activation of cooling system brought the relatively high power for a long time. (author)

Preliminary Analysis of Aircraft Loss of Control Accidents: Worst Case Precursor Combinations and Temporal Sequencing

Science.gov (United States)

Belcastro, Christine M.; Groff, Loren; Newman, Richard L.; Foster, John V.; Crider, Dennis H.; Klyde, David H.; Huston, A. McCall

2014-01-01

Aircraft loss of control (LOC) is a leading cause of fatal accidents across all transport airplane and operational classes, and can result from a wide spectrum of hazards, often occurring in combination. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of conditions and uncertainties, including multiple hazards, and their validation must provide a means of assessing system effectiveness and coverage of these hazards. This requires the definition of a comprehensive set of LOC test scenarios based on accident and incident data as well as future risks. This paper defines a comprehensive set of accidents and incidents over a recent 15 year period, and presents preliminary analysis results to identify worst-case combinations of causal and contributing factors (i.e., accident precursors) and how they sequence in time. Such analyses can provide insight in developing effective solutions for LOC, and form the basis for developing test scenarios that can be used in evaluating them. Preliminary findings based on the results of this paper indicate that system failures or malfunctions, crew actions or inactions, vehicle impairment conditions, and vehicle upsets contributed the most to accidents and fatalities, followed by inclement weather or atmospheric disturbances and poor visibility. Follow-on research will include finalizing the analysis through a team consensus process, defining future risks, and developing a comprehensive set of test scenarios with correlation to the accidents, incidents, and future risks. Since enhanced engineering simulations are required for batch and piloted evaluations under realistic LOC precursor conditions, these test scenarios can also serve as a high-level requirement for defining the engineering simulation enhancements needed for generating them.

A decision theoretic approach to an accident sequence: when feedwater and auxiliary feedwater fail in a nuclear power plant

International Nuclear Information System (INIS)

Svenson, Ola

1998-01-01

This study applies a decision theoretic perspective on a severe accident management sequence in a processing industry. The sequence contains loss of feedwater and auxiliary feedwater in a boiling water nuclear reactor (BWR), which necessitates manual depressurization of the reactor pressure vessel to enable low pressure cooling of the core. The sequence is fast and is a major contributor to core damage in probabilistic risk analyses (PRAs) of this kind of plant. The management of the sequence also includes important, difficult and fast human decision making. The decision theoretic perspective, which is applied to a Swedish ABB-type reactor, stresses the roles played by uncertainties about plant state, consequences of different actions and goals during the management of a severe accident sequence. Based on a theoretical analysis and empirical simulator data the human error probabilities in the PRA for the plant are considered to be too small. Recommendations for how to improve safety are given and they include full automation of the sequence, improved operator training, and/or actions to assist the operators' decision making through reduction of uncertainties, for example, concerning water/steam level for sufficient cooling, time remaining before insufficient cooling level in the tank is reached and organizational cost-benefit evaluations of the events following a false alarm depressurization as well as the events following a successful depressurization at different points in time. Finally, it is pointed out that the approach exemplified in this study is applicable to any accident scenario which includes difficult human decision making with conflicting goals, uncertain information and with very serious consequences

Methodology for time-dependent reliability analysis of accident sequences and complex reactor systems

International Nuclear Information System (INIS)

Paula, H.M.

1984-01-01

The work presented here is of direct use in probabilistic risk assessment (PRA) and is of value to utilities as well as the Nuclear Regulatory Commission (NRC). Specifically, this report presents a methodology and a computer program to calculate the expected number of occurrences for each accident sequence in an event tree. The methodology evaluates the time-dependent (instantaneous) and the average behavior of the accident sequence. The methodology accounts for standby safety system and component failures that occur (a) before they are demanded, (b) upon demand, and (c) during the mission (system operation). With respect to failures that occur during the mission, this methodology is unique in the sense that it models components that can be repaired during the mission. The expected number of system failures during the mission provides an upper bound for the probability of a system failure to run - the mission unreliability. The basic event modeling includes components that are continuously monitored, periodically tested, and those that are not tested or are otherwise nonrepairable. The computer program ASA allows practical applications of the method developed. This work represents a required extension of the presently available methodology and allows a more realistic PRA of nuclear power plants

Large Break LOCA Accident Management Strategies for Accidents With Large Containment Leaks

International Nuclear Information System (INIS)

Sdouz, Gert

2006-01-01

demonstrated that the accident management measures have quite lower consequences. In addition it was shown that in the case of a 'Large Break LOCA'-sequence the intact containment retains the nuclides up to a factor of 20 000. This is much more than in the case of a 'Station Blackout'-sequence. Within the frame of the study 17 source terms have been generated to evaluate in detail accident management strategies for VVER-1000 reactors. (authors)

Internal event analysis for Laguna Verde Unit 1 Nuclear Power Plant. Accident sequence quantification and results

International Nuclear Information System (INIS)

Huerta B, A.; Aguilar T, O.; Nunez C, A.; Lopez M, R.

1994-01-01

The Level 1 results of Laguna Verde Nuclear Power Plant PRA are presented in the I nternal Event Analysis for Laguna Verde Unit 1 Nuclear Power Plant, CNSNS-TR 004, in five volumes. The reports are organized as follows: CNSNS-TR 004 Volume 1: Introduction and Methodology. CNSNS-TR4 Volume 2: Initiating Event and Accident Sequences. CNSNS-TR 004 Volume 3: System Analysis. CNSNS-TR 004 Volume 4: Accident Sequence Quantification and Results. CNSNS-TR 005 Volume 5: Appendices A, B and C. This volume presents the development of the dependent failure analysis, the treatment of the support system dependencies, the identification of the shared-components dependencies, and the treatment of the common cause failure. It is also presented the identification of the main human actions considered along with the possible recovery actions included. The development of the data base and the assumptions and limitations in the data base are also described in this volume. The accident sequences quantification process and the resolution of the core vulnerable sequences are presented. In this volume, the source and treatment of uncertainties associated with failure rates, component unavailabilities, initiating event frequencies, and human error probabilities are also presented. Finally, the main results and conclusions for the Internal Event Analysis for Laguna Verde Nuclear Power Plant are presented. The total core damage frequency calculated is 9.03x 10-5 per year for internal events. The most dominant accident sequences found are the transients involving the loss of offsite power, the station blackout accidents, and the anticipated transients without SCRAM (ATWS). (Author)

Statistical evaluation of design-error related accidents

International Nuclear Information System (INIS)

Ott, K.O.; Marchaterre, J.F.

1980-01-01

In a recently published paper (Campbell and Ott, 1979), a general methodology was proposed for the statistical evaluation of design-error related accidents. The evaluation aims at an estimate of the combined residual frequency of yet unknown types of accidents lurking in a certain technological system. Here, the original methodology is extended, as to apply to a variety of systems that evolves during the development of large-scale technologies. A special categorization of incidents and accidents is introduced to define the events that should be jointly analyzed. The resulting formalism is applied to the development of the nuclear power reactor technology, considering serious accidents that involve in the accident-progression a particular design inadequacy

Risk evaluation of accident management strategies

International Nuclear Information System (INIS)

Dingman, S.; Camp, A.

1992-01-01

The use of Probabilistic Risk Assessment (PRA) methods to evaluate accident management strategies in nuclear power plants discussed in this paper. The PRA framework allows an integrated evaluation to be performed to give the full implications of a particular strategy. The methodology is demonstrated for a particular accident management strategy, intentional depressurization of the reactor coolant system to avoid containment pressurization during the ejection of molten debris at vessel breach

A methodology for analyzing precursors to earthquake-initiated and fire-initiated accident sequences

International Nuclear Information System (INIS)

Budnitz, R.J.; Lambert, H.E.; Apostolakis, G.

1998-04-01

This report covers work to develop a methodology for analyzing precursors to both earthquake-initiated and fire-initiated accidents at commercial nuclear power plants. Currently, the U.S. Nuclear Regulatory Commission sponsors a large ongoing project, the Accident Sequence Precursor project, to analyze the safety significance of other types of accident precursors, such as those arising from internally-initiated transients and pipe breaks, but earthquakes and fires are not within the current scope. The results of this project are that: (1) an overall step-by-step methodology has been developed for precursors to both fire-initiated and seismic-initiated potential accidents; (2) some stylized case-study examples are provided to demonstrate how the fully-developed methodology works in practice, and (3) a generic seismic-fragility date base for equipment is provided for use in seismic-precursors analyses. 44 refs., 23 figs., 16 tabs

Core damage frequency estimation using accident sequence precursor data: 1990-1993

International Nuclear Information System (INIS)

Martz, H.F.

1998-01-01

The Nuclear Regulatory Commission's (NRC's) ongoing Accident Sequence Precursor (ASP) program uses probabilistic risk assessment (PRA) techniques to assess the potential for severe core damage (henceforth referred to simply as core damage) based on operating events. The types of operating events considered include accident sequence initiators, safety equipment failures, and degradation of plant conditions that could increase the probability that various postulated accident sequences occur. Such operating events potentially reduce the margin of safety available for prevention of core damage an thus can be considered as precursors to core damage. The current process for identifying, analyzing, and documenting ASP events is described in detail in Vanden Heuval et al. The significance of a Licensee Event Report (LER) event (or events) is measured by means of the conditional probability that the event leads to core damage, the so-called conditional core damage probability or, simply, CCDP. When the first ASP study results were published in 1982, it covered the period 1969--1979. In addition to identification and ranking of precursors, the original study attempted to estimate core damage frequency (CDF) based on the precursor events. The purpose of this paper is to compare the average annual CDF estimates calculated using the CCDP sum, Cooke-Goossens, Bier, and Abramson estimators for various reactor classes using the combined ASP data for the four years, 1990--1993. An important outcome of this comparison is an answer to the persistent question regarding the degree and effect of the positive bias of the CCDP sum method in practice. Note that this paper only compares the estimators with each other. Because the true average CDF is unknown, the estimation error is also unknown. Therefore, any observations or characterizations of bias are based on purely theoretical considerations

Reactor Safety Gap Evaluation of Accident Tolerant Components and Severe Accident Analysis

International Nuclear Information System (INIS)

Farmer, Mitchell T.; Bunt, R.; Corradini, M.; Ellison, Paul B.; Francis, M.; Gabor, John D.; Gauntt, R.; Henry, C.; Linthicum, R.; Luangdilok, W.; Lutz, R.; Paik, C.; Plys, M.; Rabiti, Cristian; Rempe, J.; Robb, K.; Wachowiak, R.

2015-01-01

The overall objective of this study was to conduct a technology gap evaluation on accident tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist, given the current state of light water reactor (LWR) severe accident research, and additionally augmented by insights obtained from the Fukushima accident. The ultimate benefit of this activity is that the results can be used to refine the Department of Energy's (DOE) Reactor Safety Technology (RST) research and development (R&D) program plan to address key knowledge gaps in severe accident phenomena and analyses that affect reactor safety and that are not currently being addressed by the industry or the Nuclear Regulatory Commission (NRC).

Reactor Safety Gap Evaluation of Accident Tolerant Components and Severe Accident Analysis

Energy Technology Data Exchange (ETDEWEB)

Farmer, Mitchell T. [Argonne National Lab. (ANL), Argonne, IL (United States); Bunt, R. [Southern Nuclear, Atlanta, GA (United States); Corradini, M. [Univ. of Wisconsin, Madison, WI (United States); Ellison, Paul B. [GE Power and Water, Duluth, GA (United States); Francis, M. [Argonne National Lab. (ANL), Argonne, IL (United States); Gabor, John D. [Erin Engineering, Walnut Creek, CA (United States); Gauntt, R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Henry, C. [Fauske and Associates, Burr Ridge, IL (United States); Linthicum, R. [Exelon Corp., Chicago, IL (United States); Luangdilok, W. [Fauske and Associates, Burr Ridge, IL (United States); Lutz, R. [PWR Owners Group (PWROG); Paik, C. [Fauske and Associates, Burr Ridge, IL (United States); Plys, M. [Fauske and Associates, Burr Ridge, IL (United States); Rabiti, Cristian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rempe, J. [Rempe and Associates LLC, Idaho Falls, ID (United States); Robb, K. [Argonne National Lab. (ANL), Argonne, IL (United States); Wachowiak, R. [Electric Power Research Inst. (EPRI), Knovville, TN (United States)

2015-01-31

The overall objective of this study was to conduct a technology gap evaluation on accident tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist, given the current state of light water reactor (LWR) severe accident research, and additionally augmented by insights obtained from the Fukushima accident. The ultimate benefit of this activity is that the results can be used to refine the Department of Energy’s (DOE) Reactor Safety Technology (RST) research and development (R&D) program plan to address key knowledge gaps in severe accident phenomena and analyses that affect reactor safety and that are not currently being addressed by the industry or the Nuclear Regulatory Commission (NRC).

Current status of low power/shutdown PSA and accident sequence analysis for loss of RHR during mid-loop operation

International Nuclear Information System (INIS)

Park, Chang Kyu; Choi, Young; Kim, Tae Woon; Jin, Young Ho

1994-07-01

Probabilistic safety assessment (PSA) has been applied to only full-power operation of nuclear power plant (NPP), but some events which were recently occurred could reach severe plant damage state. Thus, various countries around the world have focused their interests on the evaluation for low power/shutdown (LP/S) operation. This report covers the main stream of LP/S PSA methodology, current status of LP/S PSA practices and results, and accident sequence analysis for loss of RHR during mid-loop operation. Therefore this report would be helpful for us to practice LP/S PSA for YGN 5,6 NPP which will be built in the near future. Also the results of accident sequence analysis show that operator's mis-diagnosis and failure of recovery action would initiate core damage during LP/S operation. In summary, overall environmental improvements (equipments, procedures, Tech Spec, etc, ...) and operating support system will be very useful to reduce risk during LP/S operation. (Author) 5 figs., 9 tabs

Severe accident sequence assessment for boiling water reactors: program overview

International Nuclear Information System (INIS)

Fontana, M.H.

1980-10-01

The Severe Accident Sequence Assessment (SASA) Program was started at the Oak Ridge National Laboratory (ORNL) in June 1980. This report documents the initial planning, specification of objectives, potential uses of the results, plan of attack, and preliminary results. ORNL was assigned the Brown's Ferry Unit 1 Plant with the station blackout being the initial sequence set to be addressed. This set includes: (1) loss of offsite and onsite ac power with no coolant injection; and (2) loss of offsite and onsite ac power with high pressure coolant injection (HPCI) and reactor core isolation cooling (RCIC) as long as dc power supply lasts. This report includes representative preliminary results for the former case

A direct comparison of MELCOR 1.8.3 and MAAP4 results for several PWR ampersand BWR accident sequences

International Nuclear Information System (INIS)

Leonard, M.T.; Ashbaugh, S.G.; Cole, R.K.; Bergeron, K.D.; Nagashima, K.

1996-01-01

This paper presents a comparison of calculations of severe accident progression for several postulated accident sequences for representative Pressurized Water Reactors (PWR) and Boiling Water Reactors (BWR) nuclear power plants performed with the MELCOR 1.8.3 and the MAAP4 computer codes. The PWR system examined in this study is a 1100 MWe system similar in design to a Westinghouse 3-loop plant with a large dry containment; the BWR is a 1100 MWe system similar in design to General Electric BWR/4 with a Mark I containment. A total of nine accident sequences were studied with both codes. Results of these calculations are compared to identify major differences in the timing of key events in the calculated accident progression or other important aspects of severe accident behavior, and to identify specific sources of the observed differences

Pressure Load Analysis during Severe Accidents for the Evaluation of Late Containment Failure in OPR-1000

Energy Technology Data Exchange (ETDEWEB)

Park, S. Y.; Ahn, K. I. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

The MAAP code is a system level computer code capable of performing integral analyses of potential severe accident progressions in nuclear power plants, whose main purpose is to support a level 2 probabilistic safety assessment or severe accident management strategy developments. The code employs lots of user-options for supporting a sensitivity and uncertainty analysis. The present application is mainly focused on determining an estimate of the containment building pressure load caused by severe accident sequences. Key modeling parameters and phenomenological models employed for the present uncertainty analysis are closely related to in-vessel hydrogen generation, gas combustion in the containment, corium distribution in the containment after a reactor vessel failure, corium coolability in the reactor cavity, and molten-corium interaction with concrete. The phenomenology of severe accidents is extremely complex. In this paper, a sampling-based phenomenological uncertainty analysis was performed to statistically quantify uncertainties associated with the pressure load of a containment building for a late containment failure evaluation, based on the key modeling parameters employed in the MAAP code and random samples for those parameters. Phenomenological issues surrounding the late containment failure mode are highly complex. Included are the pressurization owing to steam generation in the cavity, molten corium-concrete interaction, late hydrogen burn in the containment, and the secondary heat removal availability. The methodology and calculation results can be applied for the optimum assessment of a late containment failure model. The accident sequences considered were a loss of coolant accidents and loss of offsite accidents expected in the OPR-1000 plant. As a result, uncertainties addressed in the pressure load of the containment building were quantified as a function of time. A realistic evaluation of the mean and variance estimates provides a more complete

Application of dynamic probabilistic safety assessment approach for accident sequence precursor analysis: Case study for steam generator tube rupture

Energy Technology Data Exchange (ETDEWEB)

Lee, Han Sul; Heo, Gyun Young [Kyung Hee University, Yongin (Korea, Republic of); Kim, Tae Wan [Incheon National University, Incheon (Korea, Republic of)

2017-03-15

The purpose of this research is to introduce the technical standard of accident sequence precursor (ASP) analysis, and to propose a case study using the dynamic-probabilistic safety assessment (D-PSA) approach. The D-PSA approach can aid in the determination of high-risk/low-frequency accident scenarios from all potential scenarios. It can also be used to investigate the dynamic interaction between the physical state and the actions of the operator in an accident situation for risk quantification. This approach lends significant potential for safety analysis. Furthermore, the D-PSA approach provides a more realistic risk assessment by minimizing assumptions used in the conventional PSA model so-called the static-PSA model, which are relatively static in comparison. We performed risk quantification of a steam generator tube rupture (SGTR) accident using the dynamic event tree (DET) methodology, which is the most widely used methodology in D-PSA. The risk quantification results of D-PSA and S-PSA are compared and evaluated. Suggestions and recommendations for using D-PSA are described in order to provide a technical perspective.

Application of dynamic probabilistic safety assessment approach for accident sequence precursor analysis: Case study for steam generator tube rupture

International Nuclear Information System (INIS)

Lee, Han Sul; Heo, Gyun Young; Kim, Tae Wan

2017-01-01

The purpose of this research is to introduce the technical standard of accident sequence precursor (ASP) analysis, and to propose a case study using the dynamic-probabilistic safety assessment (D-PSA) approach. The D-PSA approach can aid in the determination of high-risk/low-frequency accident scenarios from all potential scenarios. It can also be used to investigate the dynamic interaction between the physical state and the actions of the operator in an accident situation for risk quantification. This approach lends significant potential for safety analysis. Furthermore, the D-PSA approach provides a more realistic risk assessment by minimizing assumptions used in the conventional PSA model so-called the static-PSA model, which are relatively static in comparison. We performed risk quantification of a steam generator tube rupture (SGTR) accident using the dynamic event tree (DET) methodology, which is the most widely used methodology in D-PSA. The risk quantification results of D-PSA and S-PSA are compared and evaluated. Suggestions and recommendations for using D-PSA are described in order to provide a technical perspective

Relative evaluation on decommissioning accident scenarios of nuclear facilities

International Nuclear Information System (INIS)

Jeong, Kwan-Seong; Choi, Byung-Seon; Moon, Jei-Kwon; Hyun, Dong-Jun; Kim, Geun-Ho; Kim, Tae-Hyoung; Jo, Kyung-Hwa; Seo, Jae-Seok; Jeong, Seong-Young; Lee, Jung-Jun

2012-01-01

Highlights: ► This paper suggests relative importance on accident scenarios during decommissioning of nuclear facilities. ► The importance of scenarios can be performed by using AHP and Sugeno fuzzy method. ► The AHP and Sugeno fuzzy method guarantee reliability of the importance evaluation. -- Abstract: This paper suggests the evaluation method of relative importance on accident scenarios during decommissioning of nuclear facilities. The evaluation method consists of AHP method and Sugeno fuzzy integral method. This method will guarantee the reliability of relative importance evaluation for decommissioning accident scenarios.

Statistical evaluation of design-error related nuclear reactor accidents

International Nuclear Information System (INIS)

Ott, K.O.; Marchaterre, J.F.

1981-01-01

In this paper, general methodology for the statistical evaluation of design-error related accidents is proposed that can be applied to a variety of systems that evolves during the development of large-scale technologies. The evaluation aims at an estimate of the combined ''residual'' frequency of yet unknown types of accidents ''lurking'' in a certain technological system. A special categorization in incidents and accidents is introduced to define the events that should be jointly analyzed. The resulting formalism is applied to the development of U.S. nuclear power reactor technology, considering serious accidents (category 2 events) that involved, in the accident progression, a particular design inadequacy. 9 refs

Development of Integrated Evaluation System for Severe Accident Management

Energy Technology Data Exchange (ETDEWEB)

Kim, Dong Ha; Kim, K. R.; Park, S. H.; Park, S. Y.; Park, J. H.; Song, Y. M.; Ahn, K. I.; Choi, Y

2007-06-15

The objective of the project is twofold. One is to develop a severe accident database (DB) for the Korean Standard Nuclear Power plant (OPR-1000) and a DB management system, and the other to develop a localized computer code, MIDAS (Multi-purpose IntegrateD Assessment code for Severe accidents). The MELCOR DB has been constructed for the typical representative sequences to support the previous MAAP DB in the previous phase. The MAAP DB has been updated using the recent version of MAAP 4.0.6. The DB management system, SARD, has been upgraded to manage the MELCOR DB in addition to the MAAP DB and the network environment has been constructed for many users to access the SARD simultaneously. The integrated MIDAS 1.0 has been validated after completion of package-wise validation. As the current version of MIDAS cannot simulate the anticipated transient without scram (ATWS) sequence, point-kinetics model has been implemented. Also the gap cooling phenomena after corium relocation into the RPV can be modeled by the user as an input parameter. In addition, the subsystems of the severe accident graphic simulator are complemented for the efficient severe accident management and the engine of the graphic simulator was replaced by the MIDAS instead of the MELCOR code. For the user's convenience, MIDAS input and output processors are upgraded by enhancing the interfacial programs.

Development of Integrated Evaluation System for Severe Accident Management

International Nuclear Information System (INIS)

Kim, Dong Ha; Kim, K. R.; Park, S. H.; Park, S. Y.; Park, J. H.; Song, Y. M.; Ahn, K. I.; Choi, Y.

2007-06-01

The objective of the project is twofold. One is to develop a severe accident database (DB) for the Korean Standard Nuclear Power plant (OPR-1000) and a DB management system, and the other to develop a localized computer code, MIDAS (Multi-purpose IntegrateD Assessment code for Severe accidents). The MELCOR DB has been constructed for the typical representative sequences to support the previous MAAP DB in the previous phase. The MAAP DB has been updated using the recent version of MAAP 4.0.6. The DB management system, SARD, has been upgraded to manage the MELCOR DB in addition to the MAAP DB and the network environment has been constructed for many users to access the SARD simultaneously. The integrated MIDAS 1.0 has been validated after completion of package-wise validation. As the current version of MIDAS cannot simulate the anticipated transient without scram (ATWS) sequence, point-kinetics model has been implemented. Also the gap cooling phenomena after corium relocation into the RPV can be modeled by the user as an input parameter. In addition, the subsystems of the severe accident graphic simulator are complemented for the efficient severe accident management and the engine of the graphic simulator was replaced by the MIDAS instead of the MELCOR code. For the user's convenience, MIDAS input and output processors are upgraded by enhancing the interfacial programs

Fukushima. The accident sequence and important causes. Pt. 1/3; Fukushima. Unfallablauf und wesentliche Ursachen. T. 1/3

Energy Technology Data Exchange (ETDEWEB)

Pistner, Christoph [Oeko-Institut e.V., Darmstadt (Germany). Bereich Nukleartechnik und Anlagensicherheit

2013-07-01

On March 11, 2011 a strong earthquake at the east coast of Japan and a subsequent tsunami caused severe damage at the NPP site of Fukushima Daiichi. The article covers the fundamental safety aspects of the accident progress according to the state of knowledge. The principles of nuclear technology and reactor safety are summarized in order to allow the understanding of the accidental sequence. Even two years after the disaster many questions on the sequence of accident events are still open.

Preliminary evaluation of the Accident Response Mobile Manipulation System for accident site salvage operations

International Nuclear Information System (INIS)

Trujillo, J.M.; Morse, W.D.; Jones, D.P.

1994-01-01

This paper describes and evaluates operational experiences with the Accident Response Mobile Manipulation System (ARMMS) during simulated accident site salvage operations which might involve nuclear weapons. The ARMMS is based upon a teleoperated mobility platform with two Schilling Titan 7F Manipulators

Evaluation of strategies for severe accident prevention and mitigation

International Nuclear Information System (INIS)

Tokarz, R.

1989-01-01

The NRC is planning to establish regulatory oversight on severe accident management capability in the US nuclear reactor industry. Accident management includes certain preparatory and recovery measures that can be taken by the plant operating and technical personnel to prevent or mitigate the consequences of a severe accident. Following an initiating event, accident management strategies include measures to (1) prevent core damage, (2) arrest the core damage if it begins and retain the core inside the vessel, (3) maintain containment integrity if the vessel is breached, and (4) minimize offsite releases. Objectives of the NRC Severe Accident Management Program are to assure that technically sound strategies are identified and guidance to implement these strategies is provided to utilities. This paper will describe work performed to date by Pacific Northwest Laboratory (PNL) and Battelle Memorial Institute (BMI) relative to severe accident strategy evaluation, as well as work to be performed and expected results. Working with Brookhaven National Laboratory, PNL evaluated a series of NRC suggested accident management strategies. The evaluation of these strategies was divided between PNL and Brookhaven National Laboratory and a similar paper will be presented by Brookhaven regarding their strategy evaluation. This paper will stress the overall safety issues related to the research and emphasize the strategies that are applicable to major safety issues. The relationship of these research activities to other projects is discussed, as well as planning for future changes in the direction of work to be undertaken

Postulated accidents

International Nuclear Information System (INIS)

Ullrich, W.

1980-01-01

This lecture on 'Postulated Accidents' is the first of a series of lectures on the dynamic and transient behaviour of nuclear power plants, especially pressurized water reactors. The main points covered will be: Reactivity Accidents, Transients (Intact Loop) and Loss of Cooland Accidents (LOCA) including small leak. This lecture will discuss the accident analysis in general, the definition of the various operational phases, the accident classification, and, as an example, an accident sequence analysis on the basis of 'Postulated Accidents'. (orig./RW)

Studies of potential severe accidents in Finnish nuclear power plants. Quarterly report 3. quarter 1987

International Nuclear Information System (INIS)

Aro, Ilari.

1989-07-01

This thesis is based on six publications dealing with severe accident studies in Finnish nuclear power plants. Main emphasis has been put on general technical bases and methodologies applied in severe accident evaluation in Finland. As an example of the use of the analysis and evaluation methods, the analysis of one representative accident sequence, t otal loss of AC power , has been presented for both Finnish power plant types. This accident sequence is required to be analyzed in the Finnish safety guide YVL 2.2 which deals with transient and accident analyses as a basis of technical solutions at nuclear powr plants. Two different analysis methods, MAAP 3.0 and MARCH 3/STCP have been used for receiving as complete a picture as possible of the flow of events and for verifying the models to some extent. Besides the use of the two different models, the method of sensitivity analysis has been used for evaluating the effects of some important technical parameters on the accident flow. Finally, conclusions of the applicability of the two methods for analyzing severe accident sequences in Finnish plants have been discussed

Modeling framework for crew decisions during accident sequences

International Nuclear Information System (INIS)

Lukic, Y.D.; Worledge, D.H.; Hannaman, G.W.; Spurgin, A.J.

1986-01-01

The ability to model the average behavior of operating crews in the course of accident sequences is vital in learning on how to prevent damage to power plants and to maintain safety. This paper summarizes the work carried out in support of a Human Reliability Model framework. This work develops the mathematical framework of the model and identifies the parameters which could be measured in some way, e.g., through simulator experience and/or small scale tests. Selected illustrative examples are presented, of the numerical experiments carried out in order to understand the model sensitivity to parameter variation. These examples ar discussed with the objective of deriving insights of general nature regarding operating of the model which may lead to enhanced understanding of man/machine interactions

Application of the accident management information needs methodology to a severe accident sequence

International Nuclear Information System (INIS)

Ward, L.W.; Hanson, D.J.; Nelson, W.R.; Solberg, D.E.

1989-01-01

The U.S. Nuclear Regulatory Commission is conducting an accident management research program that emphasizes the use of severe accident research to enhance the ability of plant operating personnel to effectively manage severe accidents. Hence, it is necessary to ensure that the plant instrumentation and information systems adequately provide this information to the operating staff during accident conditions. A methodology to identify and assess the information needs of the operating staff of a nuclear power plant during a severe accident has been developed. The methodology identifies (a) the information needs of the plant personnel during a wide range of accident conditions, (b) the existing plant measurements capable of supplying these information needs and minor additions to instrument and display systems that would enhance management capabilities, (c) measurement capabilities and limitations during severe accident conditions, and (d) areas in which the information systems could mislead plant personnel

Application of the accident management information needs methodology to a severe accident sequence

Energy Technology Data Exchange (ETDEWEB)

Ward, L.W.; Hanson, D.J.; Nelson, W.R. (Idaho National Engineering Laboratory, Idaho Falls (USA)); Solberg, D.E. (Nuclear Regulatory Commission, Washington, DC (USA))

1989-11-01

The U.S. Nuclear Regulatory Commission is conducting an accident management research program that emphasizes the use of severe accident research to enhance the ability of plant operating personnel to effectively manage severe accidents. Hence, it is necessary to ensure that the plant instrumentation and information systems adequately provide this information to the operating staff during accident conditions. A methodology to identify and assess the information needs of the operating staff of a nuclear power plant during a severe accident has been developed. The methodology identifies (a) the information needs of the plant personnel during a wide range of accident conditions, (b) the existing plant measurements capable of supplying these information needs and minor additions to instrument and display systems that would enhance management capabilities, (c) measurement capabilities and limitations during severe accident conditions, and (d) areas in which the information systems could mislead plant personnel.

CNE (central nuclear en Embalse): probabilistic safety study. Loss-of-coolant accidents. Analysis through events sequence

International Nuclear Information System (INIS)

Layral, S.I.

1987-01-01

The aim of this study was to perform for the Embalse nuclear power plant, a probabilistic evaluation of loss-of-coolant accidents (LOCA) to identify the risks associated with them and to determine their acceptability in accordance with norms. This study includes all ruptures in the primary system that produce the automatic activation of 'emergency core cooling system'. Three starting events were selected for the probabilistic evaluation: 100% rupture of an input collector; 5% rupture of an input collector; 1.2% rupture of an input collector. At this stage the evaluation is focussed on the identification and quantization of the main failure sequences that follow a LOCA and lead to an uncontrolled reactor state or 'core meltdown'. The most important contribution to the core meltdown due to LOCA is the failure of supplies that are required for the emergency core cooling system. (Author)

10-year evaluation of train accidents.

Science.gov (United States)

Akkaş, Meltem; Ay, Didem; Metin Aksu, Nalan; Günalp, Müge

2011-09-01

Although less frequent than automobile accidents, train accidents have a major impact on victims' lives. Records of patients older than 16 years of age admitted to the Adult Emergency Department of Hacettepe University Medical Center due to train accidents were retrospectively evaluated. 44 patients (30 males, 14 females) with a mean age of 31.8±11.4 years were included in the study. The majority of the accidents occurred during commuting hours. 37 patients were discharged, 22 of them from the emergency department. The mortality rate was 7/44 (16%). Overall mean Revised Trauma Score (RTS) was 10.5 (3 in deaths and 11.9 in survivors). In 5 patients, the cause of death was pelvic trauma leading to major vascular injury and lower limb amputation. In 1 patient, thorax and abdomen trauma and in 1 patient head injury were the causes of mortality. Primary risk factors for mortality were alcohol intoxication (100%), cardiopulmonary resuscitation on admittance (100%), recurrent suicide attempt (75%), presence of psychiatric illness (60%), and low RTS. In this study, most train accidents causing minor injuries were due to falling from the train prior to acceleration. Nevertheless, train accidents led to a mortality rate of 16% and morbidity rate of 37%. These findings draw attention to the importance of developing preventive strategies.

Evaluation of nuclear accidents consequences. Risk assessment methodologies, current status and applications

International Nuclear Information System (INIS)

Rodriguez, J.M.

1996-01-01

General description of the structure and process of the probabilistic methods of assessment the external consequences in the event of nuclear accidents is presented. attention is paid in the interface with Probabilistic Safety Analysis level 3 results (source term evaluation) Also are described key issues in accident consequence evaluation as: effects evaluated (early and late health effects and economic effects due to countermeasures), presentation of accident consequences results, computer codes. Briefly are presented some relevant areas for the applications of Accident Consequence Evaluation

Analysis of accident sequences and source terms at waste treatment and storage facilities for waste generated by U.S. Department of Energy Waste Management Operations, Volume 3: Appendixes C-H

International Nuclear Information System (INIS)

Mueller, C.; Nabelssi, B.; Roglans-Ribas, J.

1995-04-01

This report contains the Appendices for the Analysis of Accident Sequences and Source Terms at Waste Treatment and Storage Facilities for Waste Generated by the U.S. Department of Energy Waste Management Operations. The main report documents the methodology, computational framework, and results of facility accident analyses performed as a part of the U.S. Department of Energy (DOE) Waste Management Programmatic Environmental Impact Statement (WM PEIS). The accident sequences potentially important to human health risk are specified, their frequencies are assessed, and the resultant radiological and chemical source terms are evaluated. A personal computer-based computational framework and database have been developed that provide these results as input to the WM PEIS for calculation of human health risk impacts. This report summarizes the accident analyses and aggregates the key results for each of the waste streams. Source terms are estimated and results are presented for each of the major DOE sites and facilities by WM PEIS alternative for each waste stream. The appendices identify the potential atmospheric release of each toxic chemical or radionuclide for each accident scenario studied. They also provide discussion of specific accident analysis data and guidance used or consulted in this report

Analysis of accident sequences and source terms at waste treatment and storage facilities for waste generated by U.S. Department of Energy Waste Management Operations, Volume 3: Appendixes C-H

Energy Technology Data Exchange (ETDEWEB)

Mueller, C.; Nabelssi, B.; Roglans-Ribas, J. [and others

1995-04-01

This report contains the Appendices for the Analysis of Accident Sequences and Source Terms at Waste Treatment and Storage Facilities for Waste Generated by the U.S. Department of Energy Waste Management Operations. The main report documents the methodology, computational framework, and results of facility accident analyses performed as a part of the U.S. Department of Energy (DOE) Waste Management Programmatic Environmental Impact Statement (WM PEIS). The accident sequences potentially important to human health risk are specified, their frequencies are assessed, and the resultant radiological and chemical source terms are evaluated. A personal computer-based computational framework and database have been developed that provide these results as input to the WM PEIS for calculation of human health risk impacts. This report summarizes the accident analyses and aggregates the key results for each of the waste streams. Source terms are estimated and results are presented for each of the major DOE sites and facilities by WM PEIS alternative for each waste stream. The appendices identify the potential atmospheric release of each toxic chemical or radionuclide for each accident scenario studied. They also provide discussion of specific accident analysis data and guidance used or consulted in this report.

Identification and evaluation of PWR in-vessel severe accident management strategies

International Nuclear Information System (INIS)

Dukelow, J.S.; Harrison, D.G.; Morgenstern, M.

1992-03-01

This reports documents work performed the NRC/RES Accident Management Guidance Program to evaluate possible strategies for mitigating the consequences of PWR severe accidents. The selection and evaluation of strategies was limited to the in-vessel phase of the severe accident, i.e., after the initiation of core degradation and prior to RPV failure. A parallel project at BNL has been considering strategies applicable to the ex-vessel phase of PWR severe accidents

Severe accident tests and development of domestic severe accident system codes

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

According to lessons learned from Fukushima-Daiichi NPS accidents, the safety evaluation will be started based on the NRA's New Safety Standards. In parallel with this movement, reinforcement of Severe Accident (SA) Measures and Accident Managements (AMs) has been undertaken and establishments of relevant regulations and standards are recognized as urgent subjects. Strengthening responses against nuclear plant hazards, as well as realistic protection measures and their standardization is also recognized as urgent subjects. Furthermore, decommissioning of Fukushima-Daiichi Unit1 through Unit4 is promoted diligently. Taking into account JNES's mission with regard to these SA Measures, AMs and decommissioning, movement of improving SA evaluation methodologies inside and outside Japan, and prioritization of subjects based on analyses of sequences of Fukushima-Daiichi NPS accidents, three viewpoints was extracted. These viewpoints were substantiated as the following three groups of R and D subjects: (1) Obtaining near term experimental subjects: Containment venting, Seawater injection, Iodine behaviors. (2) Obtaining mid and long experimental subjects: Fuel damage behavior at early phase of core degradation, Core melting and debris formation. (3) Development of a macroscopic level SA code for plant system behaviors and a mechanistic level code for core melting and debris formation. (author)

Severe accident tests and development of domestic severe accident system codes

International Nuclear Information System (INIS)

2013-01-01

According to lessons learned from Fukushima-Daiichi NPS accidents, the safety evaluation will be started based on the NRA's New Safety Standards. In parallel with this movement, reinforcement of Severe Accident (SA) Measures and Accident Managements (AMs) has been undertaken and establishments of relevant regulations and standards are recognized as urgent subjects. Strengthening responses against nuclear plant hazards, as well as realistic protection measures and their standardization is also recognized as urgent subjects. Furthermore, decommissioning of Fukushima-Daiichi Unit1 through Unit4 is promoted diligently. Taking into account JNES's mission with regard to these SA Measures, AMs and decommissioning, movement of improving SA evaluation methodologies inside and outside Japan, and prioritization of subjects based on analyses of sequences of Fukushima-Daiichi NPS accidents, three viewpoints was extracted. These viewpoints were substantiated as the following three groups of R and D subjects: (1) Obtaining near term experimental subjects: Containment venting, Seawater injection, Iodine behaviors. (2) Obtaining mid and long experimental subjects: Fuel damage behavior at early phase of core degradation, Core melting and debris formation. (3) Development of a macroscopic level SA code for plant system behaviors and a mechanistic level code for core melting and debris formation. (author)

Severe accident approach - final report. Evaluation of design measures for severe accident prevention and consequence mitigation

International Nuclear Information System (INIS)

Tentner, A.M.; Parma, E.; Wei, T.; Wigeland, R.

2010-01-01

An important goal of the US DOE reactor development program is to conceptualize advanced safety design features for a demonstration Sodium Fast Reactor (SFR). The treatment of severe accidents is one of the key safety issues in the design approach for advanced SFR systems. It is necessary to develop an in-depth understanding of the risk of severe accidents for the SFR so that appropriate risk management measures can be implemented early in the design process. This report presents the results of a review of the SFR features and phenomena that directly influence the sequence of events during a postulated severe accident. The report identifies the safety features used or proposed for various SFR designs in the US and worldwide for the prevention and/or mitigation of Core Disruptive Accidents (CDA). The report provides an overview of the current SFR safety approaches and the role of severe accidents. Mutual understanding of these design features and safety approaches is necessary for future collaborations between the US and its international partners as part of the GEN IV program. The report also reviews the basis for an integrated safety approach to severe accidents for the SFR that reflects the safety design knowledge gained in the US during the Advanced Liquid Metal Reactor (ALMR) and Integral Fast Reactor (IFR) programs. This approach relies on inherent reactor and plant safety performance characteristics to provide additional safety margins. The goal of this approach is to prevent development of severe accident conditions, even in the event of initiators with safety system failures previously recognized to lead directly to reactor damage.

Severe accident approach - final report. Evaluation of design measures for severe accident prevention and consequence mitigation.

Energy Technology Data Exchange (ETDEWEB)

Tentner, A. M.; Parma, E.; Wei, T.; Wigeland, R.; Nuclear Engineering Division; SNL; INL

2010-03-01

An important goal of the US DOE reactor development program is to conceptualize advanced safety design features for a demonstration Sodium Fast Reactor (SFR). The treatment of severe accidents is one of the key safety issues in the design approach for advanced SFR systems. It is necessary to develop an in-depth understanding of the risk of severe accidents for the SFR so that appropriate risk management measures can be implemented early in the design process. This report presents the results of a review of the SFR features and phenomena that directly influence the sequence of events during a postulated severe accident. The report identifies the safety features used or proposed for various SFR designs in the US and worldwide for the prevention and/or mitigation of Core Disruptive Accidents (CDA). The report provides an overview of the current SFR safety approaches and the role of severe accidents. Mutual understanding of these design features and safety approaches is necessary for future collaborations between the US and its international partners as part of the GEN IV program. The report also reviews the basis for an integrated safety approach to severe accidents for the SFR that reflects the safety design knowledge gained in the US during the Advanced Liquid Metal Reactor (ALMR) and Integral Fast Reactor (IFR) programs. This approach relies on inherent reactor and plant safety performance characteristics to provide additional safety margins. The goal of this approach is to prevent development of severe accident conditions, even in the event of initiators with safety system failures previously recognized to lead directly to reactor damage.

Evaluation of total loss of feedwater accident/recovery phase and investigation of the associated EOP

International Nuclear Information System (INIS)

Bang, Young Seok; Seul, Kwang Won; Kim, Hho Jung

1993-01-01

To evaluate the sequence of event and the thermohydraulic behavior during total loss of feedwater accident and recovery procedure, a RELAP5/MOD3 calculation is performed and compared with the LOFT L9-1/L3-3 experiment. Also, the predictability of the code for the major thermohydraulic phenomena following the accident is assessed. As a result, it is found that a pressure control using the spray until the time the water level reaches the top of the pressurizer, an overpressure protection by pressurizer PORV, a recovery of the secondary heat removal capability by refilling steam generator, and an effective cooldown by the continued natural circulation can be perfomed without core uncovery. It is also found that the plantspecific evaluation is necessary to confirm the effectiveness of the current symptom-oriented emergency operating procedure, especially in an overpressure protection performance and steam generator recovery performance. (Author)

Severe Accident Sequence Analysis Program: Anticipated transient without scram simulations for Browns Ferry Nuclear Plant Unit 1

International Nuclear Information System (INIS)

Dallman, R.J.; Gottula, R.C.; Holcomb, E.E.; Jouse, W.C.; Wagoner, S.R.; Wheatley, P.D.

1987-05-01

An analysis of five anticipated transients without scram (ATWS) was conducted at the Idaho National Engineering Laboratory (INEL). The five detailed deterministic simulations of postulated ATWS sequences were initiated from a main steamline isolation valve (MSIV) closure. The subject of the analysis was the Browns Ferry Nuclear Plant Unit 1, a boiling water reactor (BWR) of the BWR/4 product line with a Mark I containment. The simulations yielded insights to the possible consequences resulting from a MSIV closure ATWS. An evaluation of the effects of plant safety systems and operator actions on accident progression and mitigation is presented

Estimation of cost per severe accident for improvement of accident protection and consequence mitigation strategies

International Nuclear Information System (INIS)

Silva, Kampanart; Ishiwatari, Yuki; Takahara, Shogo

2013-01-01

To assess the complex situations regarding the severe accidents such as what observed in Fukushima Accident, not only radiation protection aspects but also relevant aspects: health, environmental, economic and societal aspects; must be all included into the consequence assessment. In this study, the authors introduce the “cost per severe accident” as an index to analyze the consequences of severe accidents comprehensively. The cost per severe accident consists of various costs and consequences converted into monetary values. For the purpose of improvement of the accident protection and consequence mitigation strategies, the costs needed to introduce the protective actions, and health and psychological consequences are included in the present study. The evaluations of these costs and consequences were made based on the systematic consequence analysis using level 2 and 3 probabilistic safety assessment (PSA) codes. The accident sequences used in this analysis were taken from the results of level 2 seismic PSA of a virtual 1,100 MWe BWR-5. The doses to the public and the number of people affected were calculated using the level 3 PSA code OSCAAR of Japan Atomic Energy Agency (JAEA). The calculations have been made for 248 meteorological sequences, and the outputs are given as expectation values for various meteorological conditions. Using these outputs, the cost per severe accident is calculated based on the open documents on the Fukushima Accident regarding the cost of protective actions and compensations for psychological harms. Finally, optimized accident protection and consequence mitigation strategies are recommended taking into account the various aspects comprehensively using the cost per severe accident. The authors must emphasize that the aim is not to estimate the accident cost itself but to extend the scope of “risk-informed decision making” for continuous safety improvements of nuclear energy. (author)

Risk-informed analysis of the large break loss of coolant accident and PCT margin evaluation with the RISMC methodology

International Nuclear Information System (INIS)

Liang, T.H.; Liang, K.S.; Cheng, C.K.; Pei, B.S.; Patelli, E.

2016-01-01

Highlights: • With RISMC methodology, both aleatory and epistemic uncertainties have been considered. • 14 probabilistically significant sequences have been identified and quantified. • A load spectrum for LBLOCA has been conducted with CPCT and SP of each dominant sequence. • Comparing to deterministic methodologies, the risk-informed PCT margin can be greater by 44–62 K. • The SP of the referred sequence to cover 99% in the load spectrum is only 5.07 * 10 −3 . • The occurrence probability of the deterministic licensing sequence is 5.46 * 10 −5 . - Abstract: For general design basis accidents, such as SBLOCA and LBLOCA, the traditional deterministic safety analysis methodologies are always applied to analyze events based on a so called surrogate or licensing sequence, without considering how low this sequence occurrence probability is. In the to-be-issued 10 CFR 50.46a, the LBLOCA will be categorized as accidents beyond design basis and the PCT margin shall be evaluated in a risk-informed manner. According to the risk-informed safety margin characterization (RISMC) methodology, a process has been suggested to evaluate the risk-informed PCT margin. Following the RISMC methodology, a load spectrum of PCT for LBLOCA has been generated for the Taiwan’s Maanshan Nuclear Power plant and 14 probabilistic significant sequences have been identified. It was observed in the load spectrum that the conditional PCT generally ascends with the descending sequence occurrence probability. With the load spectrum covering both aleatory and epistemic uncertainties, the risk-informed PCT margin can be evaluated by either expecting value estimation method or sequence probability coverage method. It was found that by comparing with the traditional deterministic methodology, the PCT margin evaluated by the RISMC methodology can be greater by 44–62 K. Besides, to have a cumulated occurrence probability over 99% in the load spectrum, the occurrence probability of the

Risk-informed analysis of the large break loss of coolant accident and PCT margin evaluation with the RISMC methodology

Energy Technology Data Exchange (ETDEWEB)

Liang, T.H. [Institute of Nuclear Engineering and Science, National Tsing Hua University, 101 Sec. 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); Liang, K.S., E-mail: ksliang@alum.mit.edu [Institute of Nuclear Engineering and Science, National Tsing Hua University, 101 Sec. 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); Cheng, C.K.; Pei, B.S. [Institute of Nuclear Engineering and Science, National Tsing Hua University, 101 Sec. 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); Patelli, E. [Institute of Risk and Uncertainty, University of Liverpool, Room 610, Brodie Tower, L69 3GQ (United Kingdom)

2016-11-15

Highlights: • With RISMC methodology, both aleatory and epistemic uncertainties have been considered. • 14 probabilistically significant sequences have been identified and quantified. • A load spectrum for LBLOCA has been conducted with CPCT and SP of each dominant sequence. • Comparing to deterministic methodologies, the risk-informed PCT margin can be greater by 44–62 K. • The SP of the referred sequence to cover 99% in the load spectrum is only 5.07 * 10{sup −3}. • The occurrence probability of the deterministic licensing sequence is 5.46 * 10{sup −5}. - Abstract: For general design basis accidents, such as SBLOCA and LBLOCA, the traditional deterministic safety analysis methodologies are always applied to analyze events based on a so called surrogate or licensing sequence, without considering how low this sequence occurrence probability is. In the to-be-issued 10 CFR 50.46a, the LBLOCA will be categorized as accidents beyond design basis and the PCT margin shall be evaluated in a risk-informed manner. According to the risk-informed safety margin characterization (RISMC) methodology, a process has been suggested to evaluate the risk-informed PCT margin. Following the RISMC methodology, a load spectrum of PCT for LBLOCA has been generated for the Taiwan’s Maanshan Nuclear Power plant and 14 probabilistic significant sequences have been identified. It was observed in the load spectrum that the conditional PCT generally ascends with the descending sequence occurrence probability. With the load spectrum covering both aleatory and epistemic uncertainties, the risk-informed PCT margin can be evaluated by either expecting value estimation method or sequence probability coverage method. It was found that by comparing with the traditional deterministic methodology, the PCT margin evaluated by the RISMC methodology can be greater by 44–62 K. Besides, to have a cumulated occurrence probability over 99% in the load spectrum, the occurrence probability

Design study on dose evaluation method for employees at severe accident

Energy Technology Data Exchange (ETDEWEB)

Yoshida, Yoshitaka; Irie, Takashi; Kohriyama, Tamio [Institute of Nuclear Safety Systems Inc., Mihama, Fukui (Japan); Kudo, Seiichi [Mitsubishi Heavy Industries Ltd., Tokyo (Japan); Nishimura, Kazuya [Computer Software Development Co., Ltd., Tokyo (Japan)

2001-09-01

When we assume a severe accident in a nuclear power plant, it is required for rescue activity in the plant, accident management, repair work of failed parts and evaluation of employees to obtain radiation dose rate distribution or map in the plant and estimated dose value for the above works. However it might be difficult to obtain them accurately along the progress of the accident, because radiation monitors are not always installed in the areas where the accident management is planned or the repair work is thought for safety-related equipments. In this work, we analyzed diffusion of radioactive materials in case of a severe accident in a pressurized water reactor plant, investigated a method to obtain radiation dose rate in the plant from estimated radioactive sources, made up a prototype analyzing system by modeling a specific part of components and buildings in the plant from this design study on dose evaluation method for employees at severe accident, and then evaluated its availability. As a result, we obtained the followings: (1) A new dose evaluation method was established to predict the radiation dose rate in any point in the plant during a severe accident scenario. (2) This evaluation of total dose including moving route and time for the accident management and the repair work is useful for estimating radiation dose limit for these actions of the employees. (3) The radiation dose rate map is effective for identifying high radiation areas and for choosing a route with lower radiation dose rate. (author)

Design study on dose evaluation method for employees at severe accident

International Nuclear Information System (INIS)

Yoshida, Yoshitaka; Irie, Takashi; Kohriyama, Tamio; Kudo, Seiichi; Nishimura, Kazuya

2001-01-01

When we assume a severe accident in a nuclear power plant, it is required for rescue activity in the plant, accident management, repair work of failed parts and evaluation of employees to obtain radiation dose rate distribution or map in the plant and estimated dose value for the above works. However it might be difficult to obtain them accurately along the progress of the accident, because radiation monitors are not always installed in the areas where the accident management is planned or the repair work is thought for safety-related equipments. In this work, we analyzed diffusion of radioactive materials in case of a severe accident in a pressurized water reactor plant, investigated a method to obtain radiation dose rate in the plant from estimated radioactive sources, made up a prototype analyzing system by modeling a specific part of components and buildings in the plant from this design study on dose evaluation method for employees at severe accident, and then evaluated its availability. As a result, we obtained the followings: (1) A new dose evaluation method was established to predict the radiation dose rate in any point in the plant during a severe accident scenario. (2) This evaluation of total dose including moving route and time for the accident management and the repair work is useful for estimating radiation dose limit for these actions of the employees. (3) The radiation dose rate map is effective for identifying high radiation areas and for choosing a route with lower radiation dose rate. (author)

Reactivity insertion accident analysis

International Nuclear Information System (INIS)

Moreira, J.M.L.; Nakata, H.; Yorihaz, H.

1990-04-01

The correct prediction of postulated accidents is the fundamental requirement for the reactor licensing procedures. Accident sequences and severity of their consequences depend upon the analysis which rely on analytical tools which must be validated against known experimental results. Present work presents a systematic approach to analyse and estimate the reactivity insertion accident sequences. The methodology is based on the CINETHICA code which solves the point-kinetics/thermohydraulic coupled equations with weighted temperature feedback. Comparison against SPERT experimental results shows good agreement for the step insertion accidents. (author) [pt

Consequence analysis of core damage states following severe accidents for the CANDU reactor design

International Nuclear Information System (INIS)

Wahba, N.N.; Kim, Y.T.; Lie, S.G.

1997-01-01

The analytical methodology used to evaluate severe accident sequences is described. The relevant thermal-mechanical phenomena and the mathematical approach used in calculating the timing of the accident progression and source term estimate are summarized. The postulated sever accidents analyzed, in general, mainly differ in the timing to reach and progress through each defined c ore damage state . This paper presents the methodology and results of the timing and steam discharge calculations as well as source term estimate out of containment for accident sequences classified as potentially leading to core disassembly following a small break loss-of-coolant accident (LOCA) scenario as a specific example. (author)

Key Characteristics of Combined Accident including TLOFW accident for PSA Modeling

Energy Technology Data Exchange (ETDEWEB)

Kim, Bo Gyung; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of); Yoon, Ho Joon [Khalifa University of Science, Technology and Research, Abu Dhabi (United Arab Emirates)

2015-05-15

The conventional PSA techniques cannot adequately evaluate all events. The conventional PSA models usually focus on single internal events such as DBAs, the external hazards such as fire, seismic. However, the Fukushima accident of Japan in 2011 reveals that very rare event is necessary to be considered in the PSA model to prevent the radioactive release to environment caused by poor treatment based on lack of the information, and to improve the emergency operation procedure. Especially, the results from PSA can be used to decision making for regulators. Moreover, designers can consider the weakness of plant safety based on the quantified results and understand accident sequence based on human actions and system availability. This study is for PSA modeling of combined accidents including total loss of feedwater (TLOFW) accident. The TLOFW accident is a representative accident involving the failure of cooling through secondary side. If the amount of heat transfer is not enough due to the failure of secondary side, the heat will be accumulated to the primary side by continuous core decay heat. Transients with loss of feedwater include total loss of feedwater accident, loss of condenser vacuum accident, and closure of all MSIVs. When residual heat removal by the secondary side is terminated, the safety injection into the RCS with direct primary depressurization would provide alternative heat removal. This operation is called feed and bleed (F and B) operation. Combined accidents including TLOFW accident are very rare event and partially considered in conventional PSA model. Since the necessity of F and B operation is related to plant conditions, the PSA modeling for combined accidents including TLOFW accident is necessary to identify the design and operational vulnerabilities.The PSA is significant to assess the risk of NPPs, and to identify the design and operational vulnerabilities. Even though the combined accident is very rare event, the consequence of combined

The next nuclear power station generation: Beyond-design accident concepts, methods, and action sequence

International Nuclear Information System (INIS)

Asmolov, V.G.; Khakh, O.Ya.; Shashkov, M.G.

1993-01-01

The problem of beyond-design accidents at nuclear stations will not be solved unless a safety culture becomes a basic characteristic of all lines of activity. Only then can the danger of accidents as an objective feature of nuclear stations be eliminated by purposive skilled and responsible activities of those implementing safety. Nuclear-station safety is provided by the following interacting and complementary lines of activity: (1) the design and construction of nuclear stations by properly qualified design and building organizations; (2) monitoring and supervision of safety by special state bodies; (3) control of the station by the exploiting organization; and (4) scientific examination of safety within the above framework and by independent organizations. The distribution of the responsibilities, powers, and right in these lines should be defined by a law on atomic energy, but there is not such law in Russian. The beyond-design accident problem is a key one in nuclear station safety, as it clear from the serious experience with accidents and numerous probabilistic studies. There are four features of the state of this topic in Russia that are of major significance for managing accidents: the lack of an atomic energy law, the inadequacy of the technical standards, the lack of a verified program package for nuclear-station designs in order to calculate the beyond-design accidents and analyze risks, and a lack of approach by designers to such accidents on the basis of international recommendations. This paper gives a brief description of three-forming points in the scientific activity: the general concept of nuclear-station safety, methods of analyzing and providing accident management, and the sequence of actions developed by specialists at this institute in recent years

Probabilistic Dynamics for Integrated Analysis of Accident Sequences considering Uncertain Events

Directory of Open Access Journals (Sweden)

Robertas Alzbutas

2015-01-01

Full Text Available The analytical/deterministic modelling and simulation/probabilistic methods are used separately as a rule in order to analyse the physical processes and random or uncertain events. However, in the currently used probabilistic safety assessment this is an issue. The lack of treatment of dynamic interactions between the physical processes on one hand and random events on the other hand causes the limited assessment. In general, there are a lot of mathematical modelling theories, which can be used separately or integrated in order to extend possibilities of modelling and analysis. The Theory of Probabilistic Dynamics (TPD and its augmented version based on the concept of stimulus and delay are introduced for the dynamic reliability modelling and the simulation of accidents in hybrid (continuous-discrete systems considering uncertain events. An approach of non-Markovian simulation and uncertainty analysis is discussed in order to adapt the Stimulus-Driven TPD for practical applications. The developed approach and related methods are used as a basis for a test case simulation in view of various methods applications for severe accident scenario simulation and uncertainty analysis. For this and for wider analysis of accident sequences the initial test case specification is then extended and discussed. Finally, it is concluded that enhancing the modelling of stimulated dynamics with uncertainty and sensitivity analysis allows the detailed simulation of complex system characteristics and representation of their uncertainty. The developed approach of accident modelling and analysis can be efficiently used to estimate the reliability of hybrid systems and at the same time to analyze and possibly decrease the uncertainty of this estimate.

Use of an influence diagram and fuzzy probability for evaluating accident management in a BWR

International Nuclear Information System (INIS)

Yu, Donghan; Okrent, D.; Kastenberg, W.E.

1993-01-01

This paper develops a new approach for evaluating severe accident management strategies. At first, this approach considers accident management as a decision problem (i.e., ''applying a strategy'' vs. ''do nothing'') and uses influence diagrams. This approach introduces the concept of a ''fuzzy probability'' in the evaluation of an influence diagram. When fuzzy logic is applied, fuzzy probabilities in an influence diagram can be easily propagated to obtain results. In addition, the results obtained provide not only information similar to the classical approach using point-estimate values, but also additional information regarding the impact from imprecise input data. The proposed methodology is applied to the evaluation of the drywell flooding strategy for a long-term station blackout sequence in the Peach Bottom nuclear power plant. The results show that the drywell flooding strategy seems to be beneficial for preventing reactor vessel breach. It is also effective for reducing the probability of the containment failure for both liner melt-through and late overpressurization. Even though there exists uncertainty in the results, ''flooding'' is preferred to ''do nothing'' when evaluated in terms of expected consequences, i.e., early and late fatalities

Applications of probabilistic accident consequence evaluation in Cuba

International Nuclear Information System (INIS)

Rodriguez, J.M.

1996-01-01

Are presented the approaches and results of the application of Accident Consequence Evaluation methodologies in on emergency in the Juragua Nuclear Power Plant site and a population evaluation of a planned NPP site in the east of the country Findings on population sector weighing and assessment of effectiveness of primary countermeasures in the event of sever accidents (SST1 and PWR4 source terms) in Juragua NPP site are discussed Results on comparative risk-based evaluation of the population predicted evolution (in 3 temporal horizons: base year, 2005 year and 2050 year) for the planned site are described. Evaluation also included sector risk weighing, risk importance of small towns in the nearby of the effects on risk of population freezing and relocation of these villages

Accident Risks In The Energy Sector: Comparative Evaluations

International Nuclear Information System (INIS)

Hirschberg, S.; Burgherr, P.

2005-01-01

Severe accidents are considered one of the most controversial issues in current comparative studies of the environmental and health impact of energy systems. The present work focuses on severe accident scenarios relating to fossil energy chains (coal, oil and gas), nuclear power and hydro-power. The scope of the study is not limited to the power production (conversion) step of these energy chains, but, wherever applicable, also includes full energy chains. With the exception of the nuclear chain, the focus of the present work is on the evaluation of the historical experience of accidents. The basis for this evaluation is the comprehensive database ENSAD (Energy-Related Severe Accident Database), which has been established at PSI. For hypothetical nuclear accidents, a probabilistic technique has also been employed. The broader picture, derived from examination of full energy chains, leads, on a world-wide basis, to the conclusion that immediate fatality rates are much higher for the fossil chains than expected if only power plants are considered. Generally, immediate fatality rates are significantly higher for non-OECD countries than for OECD countries, and, in the case of hydro and nuclear, the difference is rather dramatic. In addition to aggregated values, frequency-consequence curves are also provided, since they not only reflect implicitly a ranking based on aggregated values, but also include such information as the observed, or predicted, chain-specific maximum extent of damages. Finally, damage and external costs of severe accidents for the different energy chains have been estimated, based on the unit cost values for the various consequence types. (author)

Modeling atmospheric dispersion for reactor accident consequence evaluation

International Nuclear Information System (INIS)

Alpert, D.J.; Gudiksen, P.H.; Woodard, K.

1982-01-01

Atmospheric dispersion models are a central part of computer codes for the evaluation of potential reactor accident consequences. A variety of ways of treating to varying degrees the many physical processes that can have an impact on the predicted consequences exists. The currently available models are reviewed and their capabilities and limitations, as applied to reactor accident consequence analyses, are discussed

Efficient method for simulation of BWR severe accident sequence events before core uncovery

International Nuclear Information System (INIS)

Harrington, R.M.

1984-01-01

BWR-LACP has been a versatile tool for the ORNL SASA program. The development effort was minimal, and the code is fast running and economical. Operator actions are easily simulated and the complete scope of both reactor vessel and primary containment are modeled. Valuable insights have been gained into accident sequences. A Fortran version is under development and it will be modified for application to Mark II plants

Instrumentation availability during severe accidents for a boiling water reactor with a Mark I containment

International Nuclear Information System (INIS)

Arcieri, W.C.; Hanson, D.J.

1992-02-01

In support of the US Nuclear Regulatory Commission Accident Management Research Program, the availability of instruments to supply accident management information during a broad range of severe accidents is evaluated for a Boiling Water Reactor with a Mark I containment. Results from this evaluation include: (1) the identification of plant conditions that would impact instrument performance and information needs during severe accidents; (2) the definition of envelopes of parameters that would be important in assessing the performance of plant instrumentation for a broad range of severe accident sequences; and (3) assessment of the availability of plant instrumentation during severe accidents

Heath Effects Sequence of Meet Halfa Radiological Accident After Twelve Years

International Nuclear Information System (INIS)

Shabon, M.H.

2013-01-01

The accident of Meet-Halfa developed consequent upon the loss of an industrial gamma radiography source. The source was found by a farmer resident of Meet-Halfa who took it to his house occupied by his family. The sequence of events developed over a period of seven weeks from the time the source was found on May 5, 2000, till the day of its retrieval from the house by the national authorities on June 26. The protracted exposure patterns of the family members during the period of source possession are not precisely known, however these exposures resulted in two fatalities, clinical forms of bone marrow depression, and several skin burns of different severities. The recent sequences of the accident is as follows:-The three survived siblings married and get good children. That mean there is no hereditary stochastic effects. The sister died at 2007 with 72 years old with senility and no specific disease. The youngest daughter amputate the left thumb and index fingers at 2001. The elder son amputate the terminal phalanx of the right thumb at 2009. The youngest daughter amputate the right index finger at 2009. The elder son graft the burn at the lower right quadrant of the abdomen for more than 20 times (3 of them were in the Mansheat Al-Bakry Millitary Hospital), but there is residual of burn untill now. Sever abdominal hernia in the elder son due to necroses in the right quadrant abdominal muscles. Grafting for these muscles occur but failed.

Severe accident analysis for level 2 PSA of SMART reactor

Energy Technology Data Exchange (ETDEWEB)

Lee, Jin Yong; Lee, Jeong Hun; Kim, Jong Uk; Yoo, Tae Geun; Chung, Soon Il; Kim, Min Gi [FNC Technology Co., Seoul (Korea, Republic of)

2010-12-15

The objectives of this study are to produce data for level 2 PSA and evaluation results of severe accident by analyzing severe accident sequence of transient events, producing fault tree of containment systems and evaluating direct containment heating of the SMART. In this project, severe accident analysis results were produced for general transient, loss of feedwater, station blackout, and steam line break events, and based on the results, design safety of SMART was verified. Also, direct containment heating phenomenon of the SMART was evaluated using TCE methodology. For level 2 PSA, fault tree of the containment isolation system, reactor cavity flooding system, plant chilled water system, and reactor containment building HVAC system was produced and analyzed

A PC Mathcad-based computational aid for severe accident analysis and its application to a BWR small LOCA sequence

International Nuclear Information System (INIS)

Wu, Laung-Kuang T.; Lee, S.J.

2004-01-01

A PC-based Mathcad program is used to develop a computational aid for analyzing severe accident phenomena. This computational aid uses simple engineering expressions and empirical correlations to estimate key quantities and timings at various stages of accident progressions. In this paper, the computational aid is applied to analyze an early phase of a BWR small LOCA sequence. The accident phenomena analyzed include: break flow rates, boiled-up water level in the core, core uncovery time, depressurization of the reactor pressure vessel, core heat-up, onset of clad oxidation, hydrogen generation, and onset of fuel relocation. The results are compared with those obtained running the MAAP 3.0B code. This PC-based computational aid can be used to train plant personnel in understanding severe accident phenomena and to assist them in managing severe accidents. (author)

On preparation for accident management in LWR power stations

International Nuclear Information System (INIS)

1996-01-01

Nuclear Safety Commission received the report from Reactor Safety General Examination Committee which investigated the policy of executing the preparation for accident management. The basic policy on the preparation for accident management was decided by Nuclear Safety Commission in May, 1992. This Examination Committee investigated the policy of executing the preparation for accident management, which had been reported from the administrative office, and as the result, it judged the policy as adequate, therefore, the report is made. The course to the foundation of subcommittee is reported. The basic policy of the examination on accident management by the subcommittee conforming to the decision by Nuclear Safety Commission, the measures of accident management which were extracted for BWR and PWR facilities, the examination of the technical adequacy of selecting accident sequences in BWR and PWR facilities and the countermeasures to them, the adequacy of the evaluation of the possibility of executing accident management measures and their effectiveness and the adequacy of the evaluation of effect to existing safety functions, the preparation of operation procedure manual, and education and training plan are reported. (K.I.)

Evaluation of major polluting accidents in China-Results and perspectives

International Nuclear Information System (INIS)

Hou Yu; Zhang Tianzhu

2009-01-01

Lessons learnt from accidents are essential sources for updating state-of-the-art requirements in pollution accident prevention. To improve this input in the People's Republic of China in a systematic way, a database for collecting and evaluating major pollution accidents is being established. This is being done in co-operation with Chinese Society for Environment Sciences and other national Institutions. At the time of writing over 80 major events from 2002-2006 have been collected. In this paper, a summary evaluation on the major polluting events in China from 2002 to 2006 is presented and some basic lessons drawn shown. There is no a systematic pollution accident notification system currently in China. The results from root cause analysis underline the importance of emergency measures, maintenance, human factor issues and the role of safety organization. Chronic pollution, especially water pollution and air pollution should be paid the same attention as the sudden pollution. It is important to keep in mind that collecting information from major accidents represents a small percentage of the actual number of events taking place.

Application of the severe accident code ATHLET-CD. Modelling and evaluation of accident management measures (Project WASA-BOSS)

Energy Technology Data Exchange (ETDEWEB)

Wilhelm, Polina; Jobst, Matthias; Kliem, Soeren; Kozmenkov, Yaroslav; Schaefer, Frank [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Div. Reactor Safety

2016-07-01

The improvement of the safety of nuclear power plants is a continuously on-going process. The analysis of transients and accidents is an important research topic, which significantly contributes to safety enhancements of existing power plants. In case of an accident with multiple failures of safety systems core uncovery and heat-up can occur. In order to prevent the accident to turn into a severe one or to mitigate the consequences of severe accidents, different accident management measures can be applied. Numerical analyses are used to investigate the accident progression and the complex physical phenomena during the core degradation phase, as well as to evaluate the effectiveness of possible countermeasures in the preventive and mitigative domain [1, 2]. The presented analyses have been performed with the computer code ATHLET-CD developed by GRS [3, 4].

Instrumentation availability for a pressurized water reactor with a large dry containment during severe accidents

International Nuclear Information System (INIS)

Arcieri, W.C.; Hanson, D.J.

1991-03-01

In support of the US Nuclear Regulatory Commission (NRC) Accident Management Research Program, the availability of instruments to supply accident management information during a broad range of severe accidents is evaluated for a pressurized water reactor with a large dry containment. Results from this evaluation include the following: (a) identification of plant conditions that would impact instrument performance and information needs during severe accidents, (b) definition of envelopes of parameters that would be important in assessing the performance of plant instrumentation for a broad range of severe accident sequences, and (c) assessment of the availability of plant instrumentation during severe accidents. 16 refs., 3 figs., 4 tabs

Realistic minimum accident source terms - Evaluation, application, and risk acceptance

International Nuclear Information System (INIS)

Angelo, P. L.

2009-01-01

The evaluation, application, and risk acceptance for realistic minimum accident source terms can represent a complex and arduous undertaking. This effort poses a very high impact to design, construction cost, operations and maintenance, and integrated safety over the expected facility lifetime. At the 2005 Nuclear Criticality Safety Division (NCSD) Meeting in Knoxville Tenn., two papers were presented mat summarized the Y-12 effort that reduced the number of criticality accident alarm system (CAAS) detectors originally designed for the new Highly Enriched Uranium Materials Facility (HEUMF) from 258 to an eventual as-built number of 60. Part of that effort relied on determining a realistic minimum accident source term specific to the facility. Since that time, the rationale for an alternate minimum accident has been strengthened by an evaluation process that incorporates realism. A recent update to the HEUMF CAAS technical basis highlights the concepts presented here. (authors)

Design study on dose evaluation method for employees at severe accident

International Nuclear Information System (INIS)

Yoshida, Yoshitaka; Irie, Takashi; Kohriyama, Tamio; Kudo, Seiichi; Nishimura, Kazuya

2002-01-01

If a severe accident occurs in a pressurized water reactor plant, it is required to estimate dose values of operators engaged in emergency such as accident management, repair of failed parts. However, it might be difficult to measure radiation dose rate during the progress of an accident, because radiation monitors are not always installed in areas where the emergency activities are required. In this study, we analyzed the transport of radioactive materials in case of a severe accident, investigated a method to obtain radiation dose rate in the plant from estimated radioactive sources, made up a prototype analyzing system from this design study, and then evaluated its availability. As a result, we obtained the following: (1) A new dose evaluation method was established to predict the radiation dose rate at any point in the plant during a severe accident scenario. (2) This evaluation of total dose including access route and time for emergency activities is useful for estimating radiation dose limit for these employee actions. (3) The radiation dose rate map is effective for identifying high radiation areas and for choosing a route with lower radiation dose rate. (author)

Comparison of the dose evaluation methods for criticality accident

International Nuclear Information System (INIS)

Shimizu, Yoshio; Oka, Tsutomu

2004-01-01

The improvement of the dose evaluation method for criticality accidents is important to rationalize design of the nuclear fuel cycle facilities. The source spectrums of neutron and gamma ray of a criticality accident depend on the condition of the source, its materials, moderation, density and so on. The comparison of the dose evaluation methods for a criticality accident is made. Some methods, which are combination of criticality calculation and shielding calculation, are proposed. Prompt neutron and gamma ray doses from nuclear criticality of some uranium systems have been evaluated as the Nuclear Criticality Slide Rule. The uranium metal source (unmoderated system) and the uranyl nitrate solution source (moderated system) in the rule are evaluated by some calculation methods, which are combinations of code and cross section library, as follows: (a) SAS1X (ENDF/B-IV), (b) MCNP4C (ENDF/B-VI)-ANISN (DLC23E or JSD120), (c) MCNP4C-MCNP4C (ENDF/B-VI). They have consisted of criticality calculation and shielding calculation. These calculation methods are compared about the tissue absorbed dose and the spectrums at 2 m from the source. (author)

The External Cost Evaluation of the Nuclear Severe Accident Using CVM

International Nuclear Information System (INIS)

Lee, Yong Suk; Lee, Byung Chul

2006-01-01

The external cost of energy can be defined as 'the cost not included in the energy market price', such as air pollution, noise, etc. Within the evaluation of the external cost of nuclear energy, the estimation of the external cost of severe accident is one of the major topics to be addressed. For the evaluation of the external cost of severe accident, the effect of risk aversion of the public against the severe accident must be addressed, because people are more concerned about low probability - high consequence events than about high probability - low consequence events having the same mean damage. It is generally recognized that there is a discrepancy between the social acceptability of the risk and the average monetary value which corresponds in principle to the compensation of the consequences for each individual of the population affected by the accident. In this paper, the CVM (Contingent Valuation Method) is used to integrate the risk aversion in the external costs of nuclear severe accidents in Korea

An Evaluation Methodology Development and Application Process for Severe Accident Safety Issue Resolution

Directory of Open Access Journals (Sweden)

Robert P. Martin

2012-01-01

Full Text Available A general evaluation methodology development and application process (EMDAP paradigm is described for the resolution of severe accident safety issues. For the broader objective of complete and comprehensive design validation, severe accident safety issues are resolved by demonstrating comprehensive severe-accident-related engineering through applicable testing programs, process studies demonstrating certain deterministic elements, probabilistic risk assessment, and severe accident management guidelines. The basic framework described in this paper extends the top-down, bottom-up strategy described in the U.S Nuclear Regulatory Commission Regulatory Guide 1.203 to severe accident evaluations addressing U.S. NRC expectation for plant design certification applications.

Simulation of LOF accidents with directly electrical heated UO2 pins

International Nuclear Information System (INIS)

Alexas, A.

1976-01-01

The behavior of directly electrical heated UO 2 pins has been investigated under loss of coolant conditions. Two types of hypothetical accidents have been simulated, first, a LOF accident without power excursion (LOF accident) and second, a LOF accident with subsequent power excursion (LOF-TOP accident). A high-speed film shows the sequence of events for two characteristic experiments. In consequence of the high-speed film analysis as well as the metallographical evaluation statements are given in respect to the cladding meltdown process, the fuel melt fraction and the energy input from the beginning of a power transient to the beginning of the molten fuel ejections

Analysis of accident sequences and source terms at treatment and storage facilities for waste generated by US Department of Energy waste management operations

Energy Technology Data Exchange (ETDEWEB)

Mueller, C.; Nabelssi, B.; Roglans-Ribas, J.; Folga, S.; Policastro, A.; Freeman, W.; Jackson, R.; Mishima, J.; Turner, S.

1996-12-01

This report documents the methodology, computational framework, and results of facility accident analyses performed for the US Department of Energy (DOE) Waste Management Programmatic Environmental Impact Statement (WM PEIS). The accident sequences potentially important to human health risk are specified, their frequencies assessed, and the resultant radiological and chemical source terms evaluated. A personal-computer-based computational framework and database have been developed that provide these results as input to the WM PEIS for the calculation of human health risk impacts. The WM PEIS addresses management of five waste streams in the DOE complex: low-level waste (LLW), hazardous waste (HW), high-level waste (HLW), low-level mixed waste (LLMW), and transuranic waste (TRUW). Currently projected waste generation rates, storage inventories, and treatment process throughputs have been calculated for each of the waste streams. This report summarizes the accident analyses and aggregates the key results for each of the waste streams. Source terms are estimated, and results are presented for each of the major DOE sites and facilities by WM PEIS alternative for each waste stream. Key assumptions in the development of the source terms are identified. The appendices identify the potential atmospheric release of each toxic chemical or radionuclide for each accident scenario studied. They also discuss specific accident analysis data and guidance used or consulted in this report.

Use of an influence diagram and fuzzy probability for evaluating accident management in a boiling water reactor

International Nuclear Information System (INIS)

Yu, D.; Kastenberg, W.E.; Okrent, D.

1994-01-01

A new approach is presented for evaluating the uncertainties inherent in severe accident management strategies. At first, this analysis considers accident management as a decision problem (i.e., applying a strategy compared with do nothing) and uses an influence diagram. To evaluate imprecise node probabilities in the influence diagram, the analysis introduces the concept of a fuzzy probability. When fuzzy logic is applied, fuzzy probabilities are easily propagated to obtain results. In addition, the results obtained provide not only information similar to the classical approach, which uses point-estimate values, but also additional information regarding the impact of using imprecise input data. As an illustrative example, the proposed methodology is applied to the evaluation of the drywell flooding strategy for a long-term station blackout sequence at the Peach Bottom nuclear power plant. The results show that the drywell flooding strategy is beneficial for preventing reactor vessel breach. It is also effective for reducing the probability of containment failure for both liner melt-through and late overpressurization. Even though uncertainty exists in the results, flooding is preferred to do nothing when evaluated in terms of two risk measures: early and late fatalities

Methodology to classify accident sequences of an Individual Plant Examination according to the severe releases for BWR type reactors

International Nuclear Information System (INIS)

Sandoval V, S.

2001-01-01

The Light Water Reactor (LWR) operation regulations require to every operating plant to perform of an Individual Plant Examination study (Ipe). One of the main purposes of an Ipe is t o gain a more quantitative understanding of the overall probabilities of core damage and fission product releases . Probabilistic Safety Analysis (PSA) methodologies and Severe Accident Analysis are used to perform Ipe studies. PSA methodologies are used to identify and analyse the set of event sequences that might originate the fission product release from a nuclear power plant; these methodologies are combinatorial in nature and generate thousands of sequences. Among other uses within an Ipe, severe accident simulations are used to determine the characteristics of the fission product release for the identified sequences and in this way, the releases can be understood and characterized. A vast amount of resources is required to simulate and analyse every Ipe sequence. This effort is unnecessary if similar sequences are grouped. The grouping scheme must achieve an efficient trade off between problem reduction and accuracy. The methodology presented in this work enables an accurate characterization and analysis of the Ipe fission product releases by using a reduced problem. The methodology encourages the use of specific plant simulations. (Author)

Accident analyses in nuclear power plants following external initiating events and in the shutdown state. Final report

International Nuclear Information System (INIS)

Loeffler, Horst; Kowalik, Michael; Mildenberger, Oliver; Hage, Michael

2016-06-01

The work which is documented here provides the methodological basis for improvement of the state of knowledge for accident sequences after plant external initiating events and for accident sequences which begin in the shutdown state. The analyses have been done for a PWR and for a BWR reference plant. The work has been supported by the German federal ministry BMUB under the label 3612R01361. Top objectives of the work are: - Identify relevant event sequences in order to define characteristic initial and boundary conditions - Perform accident analysis of selected sequences - Evaluate the relevance of accident sequences in a qualitative way The accident analysis is performed with the code MELCOR 1.8.6. The applied input data set has been significantly improved compared to previous analyses. The event tree method which is established in PSA level 2 has been applied for creating a structure for a unified summarization and evaluation of the results from the accident analyses. The computer code EVNTRE has been applied for this purpose. In contrast to a PSA level 2, the branching probabilities of the event tree have not been determined with the usual accuracy, but they are given in an approximate way only. For the PWR, the analyses show a considerable protective effect of the containment also in the case of beyond design events. For the BWR, there is a rather high probability for containment failure under core melt impact, but nevertheless the release of radionuclides into the environment is very limited because of plant internal retention mechanisms. This report concludes with remarks about existing knowledge gaps and with regard to core melt sequences, and about possible improvements of the plant safety.

Accident management information needs

International Nuclear Information System (INIS)

Hanson, D.J.; Ward, L.W.; Nelson, W.R.; Meyer, O.R.

1990-04-01

In support of the US Nuclear Regulatory Commission (NRC) Accident Management Research Program, a methodology has been developed for identifying the plant information needs necessary for personnel involved in the management of an accident to diagnose that an accident is in progress, select and implement strategies to prevent or mitigate the accident, and monitor the effectiveness of these strategies. This report describes the methodology and presents an application of this methodology to a Pressurized Water Reactor (PWR) with a large dry containment. A risk-important severe accident sequence for a PWR is used to examine the capability of the existing measurements to supply the necessary information. The method includes an assessment of the effects of the sequence on the measurement availability including the effects of environmental conditions. The information needs and capabilities identified using this approach are also intended to form the basis for more comprehensive information needs assessment performed during the analyses and development of specific strategies for use in accident management prevention and mitigation. 3 refs., 16 figs., 7 tabs

Accident management information needs

Energy Technology Data Exchange (ETDEWEB)

Hanson, D.J.; Ward, L.W.; Nelson, W.R.; Meyer, O.R. (EG and G Idaho, Inc., Idaho Falls, ID (USA))

1990-04-01

In support of the US Nuclear Regulatory Commission (NRC) Accident Management Research Program, a methodology has been developed for identifying the plant information needs necessary for personnel involved in the management of an accident to diagnose that an accident is in progress, select and implement strategies to prevent or mitigate the accident, and monitor the effectiveness of these strategies. This report describes the methodology and presents an application of this methodology to a Pressurized Water Reactor (PWR) with a large dry containment. A risk-important severe accident sequence for a PWR is used to examine the capability of the existing measurements to supply the necessary information. The method includes an assessment of the effects of the sequence on the measurement availability including the effects of environmental conditions. The information needs and capabilities identified using this approach are also intended to form the basis for more comprehensive information needs assessment performed during the analyses and development of specific strategies for use in accident management prevention and mitigation. 3 refs., 16 figs., 7 tabs.

Structural Integrity Evaluation of Containment Vessel under Severe Accident for PGSFR

International Nuclear Information System (INIS)

Lee, Seong-Hyeon; Koo, Gyeong-Hoi; Kim, Sung-Kyun

2016-01-01

This paper provides structural integrity evaluation results of CV of the PGSFR(Prototype Gen-IV Sodium Fast Reactor) under severe accident through transient analysis. The evaluation was carried out according to ASME B and PV Code Sec. III-Subsection NH rule. Structural integrity of CV was evaluated through transient analysis of structure in case of severe accident. Stress evaluation results for selected evaluation sections satisfy design criteria of ASME B and PV Code Sec. III Subsection NH. The transient load condition of normal operation will considered in the future work. The purpose of RVCS is to maintain the integrity of concrete structure during normal power operation. Therefore RVCS should be designed to keep the temperature of concrete surface under design limit and to minimize heat loss through CV(Containment Vessel). And in case of severe accident, the integrity of reactor structure and concrete structure should be maintained. Therefore RVCS should be designed to satisfy ASME Level D service limits. When RVCS works with breakdown of DHRS after severe accident, the temperature change of inner and outer surface of CV over time can affect structural integrity of CV. To verify the structural integrity, it is necessary to perform transient analysis of CV structure under changing temperature over time

A framework for the assessment of severe accident management strategies

International Nuclear Information System (INIS)

Kastenberg, W.E.; Apostolakis, G.; Dhir, V.K.

1993-09-01

Severe accident management can be defined as the use of existing and/or altemative resources, systems and actors to prevent or mitigate a core-melt accident. For each accident sequence and each combination of severe accident management strategies, there may be several options available to the operator, and each involves phenomenological and operational considerations regarding uncertainty. Operational uncertainties include operator, system and instrumentation behavior during an accident. A framework based on decision trees and influence diagrams has been developed which incorporates such criteria as feasibility, effectiveness, and adverse effects, for evaluating potential severe accident management strategies. The framework is also capable of propagating both data and model uncertainty. It is applied to several potential strategies including PWR cavity flooding, BWR drywell flooding, PWR depressurization and PWR feed and bleed

A framework for the assessment of severe accident management strategies

Energy Technology Data Exchange (ETDEWEB)

Kastenberg, W.E. [ed.; Apostolakis, G.; Dhir, V.K. [California Univ., Los Angeles, CA (United States). Dept. of Mechanical, Aerospace and Nuclear Engineering] [and others

1993-09-01

Severe accident management can be defined as the use of existing and/or altemative resources, systems and actors to prevent or mitigate a core-melt accident. For each accident sequence and each combination of severe accident management strategies, there may be several options available to the operator, and each involves phenomenological and operational considerations regarding uncertainty. Operational uncertainties include operator, system and instrumentation behavior during an accident. A framework based on decision trees and influence diagrams has been developed which incorporates such criteria as feasibility, effectiveness, and adverse effects, for evaluating potential severe accident management strategies. The framework is also capable of propagating both data and model uncertainty. It is applied to several potential strategies including PWR cavity flooding, BWR drywell flooding, PWR depressurization and PWR feed and bleed.

DOZIM - evaluation dose code for nuclear accident

International Nuclear Information System (INIS)

Oprea, I.; Musat, D.; Ionita, I.

2008-01-01

During a nuclear accident an environmentally significant fission products release can happen. In that case it is not possible to determine precisely the air fission products concentration and, consequently, the estimated doses will be affected by certain errors. The stringent requirement to cope with a nuclear accident, even minor, imposes creation of a computation method for emergency dosimetric evaluations needed to compare the measurement data to certain reference levels, previously established. These comparisons will allow a qualified option regarding the necessary actions to diminish the accident effects. DOZIM code estimates the soil contamination and the irradiation doses produced either by radioactive plume or by soil contamination. Irradiations either on whole body or on certain organs, as well as internal contamination doses produced by isotope inhalation during radioactive plume crossing are taken into account. The calculus does not consider neither the internal contamination produced by contaminated food consumption, or that produced by radioactive deposits resuspension. The code is recommended for dose computation on the wind direction, at distances from 10 2 to 2 x 10 4 m. The DOZIM code was utilized for three different cases: - In air TRIGA-SSR fuel bundle destruction with different input data for fission products fractions released into the environment; - Chernobyl-like accident doses estimation; - Intervention areas determination for a hypothetical severe accident at Cernavoda Nuclear Power Plant. For the first case input data and results (for a 60 m emission height without iodine retention on active coal filters) are presented. To summarize, the DOZIM code conception allows the dose estimation for any nuclear accident. Fission products inventory, released fractions, emission conditions, atmospherical and geographical parameters are the input data. Dosimetric factors are included in the program. The program is in FORTRAN IV language and was run on

Evaluation on operation of liquid relief valves for steam line break accidents by RELAP5/CANDU+ code

International Nuclear Information System (INIS)

Yang, C. Y.; Bang, Y. S.; Kim, H. J.

2001-01-01

A development of RELAP5/CANDU+ code for regulatory audits of accident analysis of CANDU nuclear power plants is on progress. This paper is undertaken in a procedure of a verification and validation for RELAP5/CANDU+ code by analyzing main steam line break accidents of WS 2/3/4. Following the ECC injection in sequence of the steam line breaks, the mismatch in heat transfer between the primary and the secondary systems makes pressure of the primary system instantly peaked to the open setpoint of liquid relief valves. The event sequence follows the result of WS 2/3/4 FSAR, but there is a difference in pressure transient after ECC injection. Sensitivity analysis for main factors dependent on the peak pressure such as control logics of liquid relief valves. ECC flow path and feedwater flow is performed. Because the pressure increase is continued for a long time and its peaking is high, open and close of the liquid relief valves are repeated several times, which is obviously different from those of WS 2/3/4 FSAR. As a result, it is evaluated that conservative modeling for the above variables is required in the analysis

Uncertainties and severe-accident management

International Nuclear Information System (INIS)

Kastenberg, W.E.

1991-01-01

Severe-accident management can be defined as the use of existing and or alternative resources, systems, and actions to prevent or mitigate a core-melt accident. Together with risk management (e.g., changes in plant operation and/or addition of equipment) and emergency planning (off-site actions), accident management provides an extension of the defense-indepth safety philosophy for severe accidents. A significant number of probabilistic safety assessments have been completed, which yield the principal plant vulnerabilities, and can be categorized as (a) dominant sequences with respect to core-melt frequency, (b) dominant sequences with respect to various risk measures, (c) dominant threats that challenge safety functions, and (d) dominant threats with respect to failure of safety systems. Severe-accident management strategies can be generically classified as (a) use of alternative resources, (b) use of alternative equipment, and (c) use of alternative actions. For each sequence/threat and each combination of strategy, there may be several options available to the operator. Each strategy/option involves phenomenological and operational considerations regarding uncertainty. These include (a) uncertainty in key phenomena, (b) uncertainty in operator behavior, (c) uncertainty in system availability and behavior, and (d) uncertainty in information availability (i.e., instrumentation). This paper focuses on phenomenological uncertainties associated with severe-accident management strategies

Construction accident narrative classification: An evaluation of text mining techniques.

Science.gov (United States)

Goh, Yang Miang; Ubeynarayana, C U

2017-11-01

Learning from past accidents is fundamental to accident prevention. Thus, accident and near miss reporting are encouraged by organizations and regulators. However, for organizations managing large safety databases, the time taken to accurately classify accident and near miss narratives will be very significant. This study aims to evaluate the utility of various text mining classification techniques in classifying 1000 publicly available construction accident narratives obtained from the US OSHA website. The study evaluated six machine learning algorithms, including support vector machine (SVM), linear regression (LR), random forest (RF), k-nearest neighbor (KNN), decision tree (DT) and Naive Bayes (NB), and found that SVM produced the best performance in classifying the test set of 251 cases. Further experimentation with tokenization of the processed text and non-linear SVM were also conducted. In addition, a grid search was conducted on the hyperparameters of the SVM models. It was found that the best performing classifiers were linear SVM with unigram tokenization and radial basis function (RBF) SVM with uni-gram tokenization. In view of its relative simplicity, the linear SVM is recommended. Across the 11 labels of accident causes or types, the precision of the linear SVM ranged from 0.5 to 1, recall ranged from 0.36 to 0.9 and F1 score was between 0.45 and 0.92. The reasons for misclassification were discussed and suggestions on ways to improve the performance were provided. Copyright © 2017 Elsevier Ltd. All rights reserved.

Safety evaluation of accident-tolerant FCM fueled core with SiC-coated zircalloy cladding for design-basis-accidents and beyond DBAs

Energy Technology Data Exchange (ETDEWEB)

Chun, Ji-Han, E-mail: chunjh@kaeri.re.kr; Lim, Sung-Won; Chung, Bub-Dong; Lee, Won-Jae

2015-08-15

Highlights: • Thermal conductivity model of the FCM fuel was developed and adopted in the MARS. • Scoping analysis for candidate FCM FAs was performed to select feasible FA. • Preliminary safety criteria for FCM fuel and SiC/Zr cladding were set up. • Enhanced safety margin and accident tolerance for FCM-SiC/Zr core were demonstrated. - Abstract: The FCM fueled cores proposed as an accident tolerant concept is assessed against the design-basis-accident (DBA) and the beyond-DBA (BDBA) scenarios using MARS code. A thermal conductivity model of FCM fuel is incorporated in the MARS code to take into account the effects of irradiation and temperature that was recently measured by ORNL. Preliminary analyses regarding the initial stored energy and accident tolerant performance were carried out for the scoping of various cladding material candidates. A 16 × 16 FA with SiC-coated Zircalloy cladding was selected as the feasible conceptual design through a preliminary scoping analysis. For a selected design, safety analyses for DBA and BDBA scenarios were performed to demonstrate the accident tolerance of the FCM fueled core. A loss of flow accident (LOFA) scenario was selected for a departure-from-nucleate-boiling (DNB) evaluation, and large-break loss of coolant accident (LBLOCA) scenario for peak cladding temperature (PCT) margin evaluation. A control element assembly (CEA) ejection accident scenario was selected for peak fuel enthalpy and temperature. Moreover, a station blackout (SBO) and LBLOCA without a safety injection (SI) scenario were selected as a BDBA. It was demonstrated that the DBA safety margin of the FCM core is satisfied and the time for operator actions for BDBA s is evaluated.

Scoping Study Investigating PWR Instrumentation during a Severe Accident Scenario

Energy Technology Data Exchange (ETDEWEB)

Rempe, J. L. [Rempe and Associates, LLC, Idaho Falls, ID (United States); Knudson, D. L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lutz, R. J. [Lutz Nuclear Safety Consultant, LLC, Asheville, NC (United States)

2015-09-01

The accidents at the Three Mile Island Unit 2 (TMI-2) and Fukushima Daiichi Units 1, 2, and 3 nuclear power plants demonstrate the critical importance of accurate, relevant, and timely information on the status of reactor systems during a severe accident. These events also highlight the critical importance of understanding and focusing on the key elements of system status information in an environment where operators may be overwhelmed with superfluous and sometimes conflicting data. While progress in these areas has been made since TMI-2, the events at Fukushima suggests that there may still be a potential need to ensure that critical plant information is available to plant operators. Recognizing the significant technical and economic challenges associated with plant modifications, it is important to focus on instrumentation that can address these information critical needs. As part of a program initiated by the Department of Energy, Office of Nuclear Energy (DOE-NE), a scoping effort was initiated to assess critical information needs identified for severe accident management and mitigation in commercial Light Water Reactors (LWRs), to quantify the environment instruments monitoring this data would have to survive, and to identify gaps where predicted environments exceed instrumentation qualification envelop (QE) limits. Results from the Pressurized Water Reactor (PWR) scoping evaluations are documented in this report. The PWR evaluations were limited in this scoping evaluation to quantifying the environmental conditions for an unmitigated Short-Term Station BlackOut (STSBO) sequence in one unit at the Surry nuclear power station. Results were obtained using the MELCOR models developed for the US Nuclear Regulatory Commission (NRC)-sponsored State of the Art Consequence Assessment (SOARCA) program project. Results from this scoping evaluation indicate that some instrumentation identified to provide critical information would be exposed to conditions that

CNE (Embalse nuclear power plant): probabilistic safety study. Loss of service water. Probabilistic evaluation and analysis through events sequence

International Nuclear Information System (INIS)

Couto, A.J.; Perez, S.S.

1987-01-01

This work is part of a study on the service water systems of the Embalse nuclear power plant from a safety point of view. The faults of service water systems of high and low pressure that can lead to situations threatening the plant safety were analyzed in a previous report. The event 'total loss of low pressure service water' causes the largest number of such conditions. Such event is an operational incident that can lead to an accident situation due to faults in the required process systems or by omission of a procedure. The annual frequency of the event 'total loss of low pressure service water' is calculated. The main contribution comes from pump failure. The evaluation of the accident sequences shows that the most direct way to the liberation of fission products is the loss of steam generators as heat sink. The contributions to small and large LOCA and electric supply loss are analyzed. The sequence that leads to tritium release through boiling of moderator is also evaluated. (Author)

Investigation of evaluation method for marine radiological impact during an accident

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-08-15

In 2012, JNES carried out to investigate the measurement information of radionuclide released to the ocean at Fukushima Daiichi NPP accident, the foreign regulation for marine radiological impact, and the evaluation method for release and diffusion to the ocean at the accident inside and outside Japan. (author)

Risk evaluation for protection of the public in radiation accidents

International Nuclear Information System (INIS)

1967-01-01

Evaluation of the risk that would be involved in the exposure of the public in the event of a radiation accident requires information on the biological consequences expected of such an exposure. This report defines a range of reference doses of radiation and their corresponding risks to the public in the event of a radiation accident. The reference doses and the considerations on which they were based will be used for assessing the hazards of nuclear installations and for policy decisions by the authorities responsible for measures taken to safeguards the public in the case of a nuclear accident.

A structured approach to individual plant evaluation and accident management

International Nuclear Information System (INIS)

Klopp, G.T.

1991-01-01

The current requirements for the performance of individual plant evaluations (IPE's) include the derivation of accident management insights as and if they occur in the course of finalizing an IPE. The development of formal, structured accident management programs is, however, explicitly excluded from current IPE requirements. The Nuclear Regulatory Commission is following the Nuclear Management and Resources Council (NUMARC) efforts to establish the framework(s) for accident management program development and plants to issue requirements on such development at a later date. The Commonwealth Edison program consists of comprehensive level 2 PRA's which address the requirements for IPE's and which go beyond those requirements. From the start of the IPE efforts, it was firmly held, within Edison, that the best way to fully and economically extract a viable accident management program from an IPE was to integrate the two efforts from the start and include the accident management program development as a required IPE product

Analysis of severe accidents in pressurized heavy water reactors

International Nuclear Information System (INIS)

2008-06-01

Certain very low probability plant states that are beyond design basis accident conditions and which may arise owing to multiple failures of safety systems leading to significant core degradation may jeopardize the integrity of many or all the barriers to the release of radioactive material. Such event sequences are called severe accidents. It is required in the IAEA Safety Requirements publication on Safety of the Nuclear Power Plants: Design, that consideration be given to severe accident sequences, using a combination of engineering judgement and probabilistic methods, to determine those sequences for which reasonably practicable preventive or mitigatory measures can be identified. Acceptable measures need not involve the application of conservative engineering practices used in setting and evaluating design basis accidents, but rather should be based on realistic or best estimate assumptions, methods and analytical criteria. Recently, the IAEA developed a Safety Report on Approaches and Tools for Severe Accident Analysis. This publication provides a description of factors important to severe accident analysis, an overview of severe accident phenomena and the current status in their modelling, categorization of available computer codes, and differences in approaches for various applications of severe accident analysis. The report covers both the in- and ex-vessel phases of severe accidents. The publication is consistent with the IAEA Safety Report on Accident Analysis for Nuclear Power Plants and can be considered as a complementary report specifically devoted to the analysis of severe accidents. Although the report does not explicitly differentiate among various reactor types, it has been written essentially on the basis of available knowledge and databases developed for light water reactors. Therefore its application is mostly oriented towards PWRs and BWRs and, to a more limited extent, they can be only used as preliminary guidance for other types of reactors

Development and application of a radioactivity evaluation technique the to obtain radiation exposure dose of radioactivity evaluation technique when a severe accident occurs in the a power station of a severe accident. Accident management guidelines of knowledge-based maintenance

International Nuclear Information System (INIS)

Kawasaki, Ikuo; Yoshida, Yoshitaka

2013-01-01

As a One of the lessons learned from the nuclear accident at the Fukushima Daiichi Nuclear Power Stations of Tokyo Electric Power Company, the was the need for improvement of accident management guidelines is required. In this report study, we developed and applied a dose evaluation technique to evaluated the radiation dose in a nuclear power plant assuming three conditions: employees were evacuation evacuated at the time of a severe accident occurrence; operators carried out the accident management operation; of the operators, and the repair work was carried out for of the trouble damaged apparatuses in a the nuclear power plant using a dose evaluation system. The following knowledge findings were obtained and should to be reflected to in the knowledge base of the guidelines was obtained. (1) By making clearly identifying an areas beforehand becoming the that would receive high radiation doses at the time of a severe accident definitely beforehand, we can employees can be moved to the evacuation places through an areas having of low dose rate and it is also known it how much we long employees can safely stay in the evacuation places. (2) When they circulate CV containment vessel recirculation sump water is recirculated by for the accident management operation and the restoration of safety in the facilities, because the plumbing piping and the apparatuses become radioactive radioactivity sources, the dose evaluation of the shortest access route and detour access routes with should be made for effective the accident management operation is effective. Because the area where a dose rate rises changes which as safety apparatuses are restored, in consideration of a plant state, it is necessary to judge the rightness or wrongness of the work continuation from the spot radioactive dose of the actual apparatus area, with based on precedence of the need to restore with precedence, and to choose a system to be used for accident management. (author)

Analysis of accident sequences and source terms at waste treatment and storage facilities for waste generated by U.S. Department of Energy Waste Management Operations, Volume 1: Sections 1-9

International Nuclear Information System (INIS)

Mueller, C.; Nabelssi, B.; Roglans-Ribas, J.

1995-04-01

This report documents the methodology, computational framework, and results of facility accident analyses performed for the U.S. Department of Energy (DOE) Waste Management Programmatic Environmental Impact Statement (WM PEIS). The accident sequences potentially important to human health risk are specified, their frequencies are assessed, and the resultant radiological and chemical source terms are evaluated. A personal computer-based computational framework and database have been developed that provide these results as input to the WM PEIS for calculation of human health risk impacts. The methodology is in compliance with the most recent guidance from DOE. It considers the spectrum of accident sequences that could occur in activities covered by the WM PEIS and uses a graded approach emphasizing the risk-dominant scenarios to facilitate discrimination among the various WM PEIS alternatives. Although it allows reasonable estimates of the risk impacts associated with each alternative, the main goal of the accident analysis methodology is to allow reliable estimates of the relative risks among the alternatives. The WM PEIS addresses management of five waste streams in the DOE complex: low-level waste (LLW), hazardous waste (HW), high-level waste (HLW), low-level mixed waste (LLMW), and transuranic waste (TRUW). Currently projected waste generation rates, storage inventories, and treatment process throughputs have been calculated for each of the waste streams. This report summarizes the accident analyses and aggregates the key results for each of the waste streams. Source terms are estimated and results are presented for each of the major DOE sites and facilities by WM PEIS alternative for each waste stream. The appendices identify the potential atmospheric release of each toxic chemical or radionuclide for each accident scenario studied. They also provide discussion of specific accident analysis data and guidance used or consulted in this report

Treatment of Events Representing System Success in Accident Sequences in PSA Models with ET/FT Linking

International Nuclear Information System (INIS)

Vrbanic, I.; Spiler, J.; Mikulicic, V.; Simic, Z.

2002-01-01

Treatment of events that represent systems' successes in accident sequences is well known issue associated primarily with those PSA models that employ event tree / fault tree (ET / FT) linking technique. Even theoretically clear, practical implementation and usage creates for certain PSA models a number of difficulties regarding result correctness. Strict treatment of success-events would require consistent applying of de Morgan laws. However, there are several problems related to it. First, Boolean resolution of the overall model, such as the one representing occurrence of reactor core damage, becomes very challenging task if De Morgan rules are applied consistently at all levels. Even PSA tools of the newest generation have some problems with performing such a task in a reasonable time frame. The second potential issue is related to the presence of negated basic events in minimal cutsets. If all the basic events that result from strict applying of De Morgan rules are retained in presentation of minimal cutsets, their readability and interpretability may be impaired severely. It is also worth noting that the concept of a minimal cutset is tied to equipment failures, rather than to successes. For reasons like these, various simplifications are employed in PSA models and tools, when it comes to the treatment of success-events in the sequences. This paper provides a discussion of major concerns associated with the treatment of success-events in accident sequences of a typical PSA model. (author)

Accident management

International Nuclear Information System (INIS)

Lutz, R.J.; Monty, B.S.; Liparulo, N.J.; Desaedeleer, G.

1989-01-01

The foundation of the framework for a Severe Accident Management Program is the contained in the Probabilistic Safety Study (PSS) or the Individual Plant Evaluations (IPE) for a specific plant. The development of a Severe Accident Management Program at a plant is based on the use of the information, in conjunction with other applicable information. A Severe Accident Management Program must address both accident prevention and accident mitigation. The overall Severe Accident Management framework must address these two facets, as a living program in terms of gathering the evaluating information, the readiness to respond to an event. Significant international experience in the development of severe accident management programs exist which should provide some direction for the development of Severe Accident Management in the U.S. This paper reports that the two most important elements of a Severe Accident Management Program are the Emergency Consultation process and the standards for measuring the effectiveness of individual Severe Accident Management Programs at utilities

77 FR 66649 - Proposed Revision to Probabilistic Risk Assessment and Severe Accident Evaluation for New Reactors

Science.gov (United States)

2012-11-06

... and Severe Accident Evaluation for New Reactors AGENCY: Nuclear Regulatory Commission. ACTION... Assessment and Severe Accident Evaluation for New Reactors.'' The NRC is extending the public comment period... assessment (PRA) information and severe accident assessments for new reactors submitted to support design...

On high-temperature reactor accident topology

International Nuclear Information System (INIS)

Fassbender, J.; Kroeger, W.; Wolters, J.

1981-01-01

American and German risk studies for an HTGR and independent investigations of hypothetical accident sequences led to a fundamental understanding of the topology of HTGR accident sequences. The dominating importance of core heat-up accidents was confirmed and the initiating events were identified. Complications of core heat-up accidents by air or water ingress are of minor importance for the risk, whereas the long-term development of accidents during days and weeks plays an important role for the environmental impact. The risk caused by an HTGR at a German site cannot yet be determined exactly, because no modern German HTGR design has passed a licensing procedure. Cautious estimates show that risk will appear to be substantially smaller than the LWR risk. The main reasons are the considerably reduced release of fission procucts and the slow development of core heat-up accidents leaving much time for measures which reduce the risk. (orig.) [de

Institut Laue Langevin. Complementary safety evaluation in the light of the Fukushima accident

International Nuclear Information System (INIS)

2011-01-01

This report proposes a complementary safety evaluation of Laue Langevin Institute (ILL) in Grenoble, one of the French basic nuclear installations (BNI, in French INB) in the light of the Fukushima accident. This evaluation takes the following risks into account: risks of flooding, earthquake, loss of power supply and loss of cooling, in addition to operational management of accident situations. It presents some characteristics of the installation (location, operator, industrial environment, installation characteristics), reports a macroscopic safety study focused of installation structures, systems and components, evaluates the seismic risk (installation sizing, margin evaluation, reinforcement propositions, possible ground acceleration levels, reactivity, cooling and confinement control), evaluates the flooding risk (installation sizing, margin evaluation), briefly examines other extreme natural phenomena (extreme meteorological conditions related to flooding, earthquake with flooding). It analyzes the risk of a loss of power supply and of cooling (loss of external and internal electric sources, loss of the ultimate cooling system). It analyzes the management of severe accidents: core cooling management, confinement management after fuel damage, cooling management of irradiated fuel element in pool, cliff effect for these three types of accident. It discusses the conditions of the use of subcontractors. In conclusion, reinforcement and strengthening measures are proposed and discussed

Evaluation of a severe accident management strategy for boiling water reactors -- Drywell flooding

International Nuclear Information System (INIS)

Yu, D.; Xing, L.; Kastenberg, W.E.; Okrent, D.

1994-01-01

Flooding of the drywell has been suggested as a strategy to prevent reactor vessel and containment failure in boiling water reactors. To evaluate the candidate strategy, this study considers accident management as a decision problem (''drywell flooding'' versus ''do nothing'') and develops a decision-oriented framework, namely, the influence diagram approach. This analysis chooses the long-term station blackout sequence for a Mark 1 nuclear power plant (Peach Bottom), and an influence diagram with a single decision node is constructed. The node probabilities in the influence diagram are obtained from US Nuclear Regulatory Commission reports or estimated by probabilistic risk assessment methodology. In assessing potential benefits compared with adverse effects, this analysis uses two consequence measures, i.e., early and late fatalities, as decision criteria. The analysis concludes that even though potential adverse effects exist, such as ex-vessel steam explosions and containment isolation failure, the drywell flooding strategy is preferred to ''do nothing'' when evaluated in terms of these consequence measures

Simulation with the MELCOR code of two severe accident sequences, Station Blackout and Small Break LOCA, for the Atucha I nuclear power plant

International Nuclear Information System (INIS)

Valle Cepero, Reinaldo

2004-01-01

The results of the PSA-I applied to the Atucha I nuclear power plant (CNA I) determine the accidental sequences with the most influence related to the probability of the core reactor damage. Among those sequences are include, the Station Blackout and lost of primary coolant, combine with the failure of the emergency injection systems by pipe breaks of diameters between DN100 - DN25 or equivalent areas, Small LOCA. This paper has the objective to model and analyze the behavior of the primary circuit and the pressure vessel during the evolution of those two accidental sequences. It presented a detailed analysis of the main phenomena that occur from the initial moment of the accident to the failure moment of the pressure vessel and the melt material fall to the reactor cavity. Two sequences were taken into account, considering the main phenomena (core uncover, heating, fuel element oxidation, hydrogen generation, degradation and relocation of the melt material, failure of the support structures, etc.) and the time of occurrence, of those events will be different, if it is considered that both sequences will be developed in different scenarios. One case is an accident with the primary circuit to a high pressure (Station Blackout scenario) and the other with a early primary circuit depressurization due to the lost of primary coolant. For this work the MELCOR 1.8.5 code was used and it allows within a unified framework to modeling an extensive spectrum of phenomenology associated with the severe accidents. (author)

Analysis of radionuclide behavior in a BWR Mark-II containment under severe accident management condition in low pressure sequence

International Nuclear Information System (INIS)

Funayama, Kyoko; Kajimoto, Mitsuhiro; Nagayoshi, Takuji; Tanaka, Nobuo

1999-01-01

In the Level 2 PSA program at INS/NUPEC, MELCOR1.8.3 is extensively applied to analyze radionuclide behavior of dominant sequences. In addition, the revised source terms provided in the NUREG-1465 report have been also discussed to examine the potential of the radionuclides release to the environment in the conventional siting criteria. In the present study, characteristics of source terms to the environment were examined comparing with results by the Hypothetical Accident (LOCA), NUREG-1465 and MELCOR1.8.3. calculation for a typical BWR with a Mark-II containment in order to assure conservatives of the Hypothetical Accident in Japan. Release fractions of iodine to the environment for the Hypothetical Accident and NUREG-1465, which used engineering models for predicting radionuclide behaviors, were about 10 -4 and 10 -6 of core inventory, respectively, while the best estimate MELCOR1.8.3 code predicted 10 -9 of iodine to the environment. The present study showed that the engineering models in the Hypothetical Accident or NUREG-1465 have large conservatives to estimate source term of iodine to the environment. (author)

A Quantitative Accident Sequence Analysis for a VHTR

Energy Technology Data Exchange (ETDEWEB)

Kim, Jintae; Lee, Joeun; Jae, Moosung [Hanyang University, Seoul (Korea, Republic of)

2016-05-15

In Korea, the basic design features of VHTR are currently discussed in the various design concepts. Probabilistic risk assessment (PRA) offers a logical and structured method to assess risks of a large and complex engineered system, such as a nuclear power plant. It will be introduced at an early stage in the design, and will be upgraded at various design and licensing stages as the design matures and the design details are defined. Risk insights to be developed from the PRA are viewed as essential to developing a design that is optimized in meeting safety objectives and in interpreting the applicability of the existing demands to the safety design approach of the VHTR. In this study, initiating events which may occur in VHTRs were selected through MLD method. The initiating events were then grouped into four categories for the accident sequence analysis. Initiating events frequency and safety systems failure rate were calculated by using reliability data obtained from the available sources and fault tree analysis. After quantification, uncertainty analysis was conducted. The SR and LR frequency are calculated respectively 7.52E- 10/RY and 7.91E-16/RY, which are relatively less than the core damage frequency of LWRs.

Use of decision trees for evaluating severe accident management strategies in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Jae, Moosung [Hanyang Univ., Seoul (Korea, Republic of). Dept. of Nuclerar Engineering; Lee, Yongjin; Jerng, Dong Wook [Chung-Ang Univ., Seoul (Korea, Republic of). School of Energy Systems Engineering

2016-07-15

Accident management strategies are defined to innovative actions taken by plant operators to prevent core damage or to maintain the sound containment integrity. Such actions minimize the chance of offsite radioactive substance leaks that lead to and intensify core damage under power plant accident conditions. Accident management extends the concept of Defense in Depth against core meltdown accidents. In pressurized water reactors, emergency operating procedures are performed to extend the core cooling time. The effectiveness of Severe Accident Management Guidance (SAMG) became an important issue. Severe accident management strategies are evaluated with a methodology utilizing the decision tree technique.

Accident management approach in Armenia

International Nuclear Information System (INIS)

Ghazaryan, K.

1999-01-01

In this lecture the accident management approach in Armenian NPP (ANPP) Unit 2 is described. List of BDBAs had been developed by OKB Gydropress in 1994. 13 accident sequences were included in this list. The relevant analyses had been performed in VNIIAES and the 'Guidelines on operator actions for beyond design basis accident (BDBA) management at ANPP Unit 2' had been prepared. These instructions are discussed

Accident information needs

International Nuclear Information System (INIS)

Hanson, D.J.; Arcieri, W.C.; Ward, L.W.

1992-01-01

A Five-step methodology has been developed to evaluate information needs for nuclear power plants under accident conditions and the availability of plant instrumentation during severe accidents. Step 1 examines the credible accidents and their relationships to plant safety functions. Step 2 determines the information personnel involved in accident management will need to understand plant behavior. Step 3 determines the capability of the instrumentation to function properly under severe accident conditions. Step 4 determines the conditions expected during the identified severe accidents. Step 5 compares the instrument capabilities and the severe accident conditions to evaluate the availability of the instrumentation to supply needed plant information

Accident information needs

Energy Technology Data Exchange (ETDEWEB)

Hanson, D.J.; Arcieri, W.C.; Ward, L.W.

1992-12-31

A Five-step methodology has been developed to evaluate information needs for nuclear power plants under accident conditions and the availability of plant instrumentation during severe accidents. Step 1 examines the credible accidents and their relationships to plant safety functions. Step 2 determines the information personnel involved in accident management will need to understand plant behavior. Step 3 determines the capability of the instrumentation to function properly under severe accident conditions. Step 4 determines the conditions expected during the identified severe accidents. Step 5 compares the instrument capabilities and the severe accident conditions to evaluate the availability of the instrumentation to supply needed plant information.

Accident information needs

Energy Technology Data Exchange (ETDEWEB)

Hanson, D.J.; Arcieri, W.C.; Ward, L.W.

1992-01-01

A Five-step methodology has been developed to evaluate information needs for nuclear power plants under accident conditions and the availability of plant instrumentation during severe accidents. Step 1 examines the credible accidents and their relationships to plant safety functions. Step 2 determines the information personnel involved in accident management will need to understand plant behavior. Step 3 determines the capability of the instrumentation to function properly under severe accident conditions. Step 4 determines the conditions expected during the identified severe accidents. Step 5 compares the instrument capabilities and the severe accident conditions to evaluate the availability of the instrumentation to supply needed plant information.

Psychological evaluation of the patients contaminated in the Goiania radiological accident in Brazil

International Nuclear Information System (INIS)

1989-08-01

The psychological evaluation of 68 patients contaminated in the Goiania accident as well as of the personnel (about 27) working at the organizations responsible for the assistance given to the victims of the accident is presented

Probabilistic accident sequence recovery analysis

International Nuclear Information System (INIS)

Stutzke, Martin A.; Cooper, Susan E.

2004-01-01

Recovery analysis is a method that considers alternative strategies for preventing accidents in nuclear power plants during probabilistic risk assessment (PRA). Consideration of possible recovery actions in PRAs has been controversial, and there seems to be a widely held belief among PRA practitioners, utility staff, plant operators, and regulators that the results of recovery analysis should be skeptically viewed. This paper provides a framework for discussing recovery strategies, thus lending credibility to the process and enhancing regulatory acceptance of PRA results and conclusions. (author)

Use of PSA to support accident management at NPPs

International Nuclear Information System (INIS)

Gomez Cobo, A.

1997-01-01

The presentation discusses the following: Overview of PSA level 2; Introduction: Framework; Accident Progression Phenomena in the Confinement/containment; Severe Accident Sequences; Examples; Results and Insights. Accident Management: Concepts; Process; Use of PSA to support Accident; Management

On the sequence and consequences of the Chernobyl reactor accident

Energy Technology Data Exchange (ETDEWEB)

Hennies, H H

1986-01-01

A serious reactor accident occurred on April 26, 1986 at Chernobyl near Kiev (Soviet Union) where, after melting of the core, there was a considerable release of radioactivity to the environment and to the atmosphere. The radioactivity release caused irradiation of the operating staff, which led to 24 deaths by June 1986. Hardly anything is known about the irradiation of the environment of the reactor plant, but the population within a radius of 30 km was evacuated. The radioactivity released into the atmosphere spread all over Europe, and Germany was affected a few days after the accident. The article gives a short description of the plant which suffered the accident, one tries to describe the course of the accident and to discuss the applicability to German plants.

77 FR 61446 - Proposed Revision Probabilistic Risk Assessment and Severe Accident Evaluation for New Reactors

Science.gov (United States)

2012-10-09

... Severe Accident Evaluation for New Reactors AGENCY: Nuclear Regulatory Commission. ACTION: Standard... its Standard Review Plan (SRP), Section 19.0, ``Probabilistic Risk Assessment and Severe Accident... assessment (PRA) information and severe accident assessments for new reactors submitted to support design...

A cliff edge evaluation for CANDU-6 beyond design basis accidents

Energy Technology Data Exchange (ETDEWEB)

Kim, S.M.; Kho, D.W., E-mail: wolsong@khnp.co.kr [Korea Hydro and Nuclear Power Co., Ltd., Daejeon (Korea, Republic of); Yi, S.D.; Kang, S.H.; Kim, S.R. [Nuclear Engineering Service and Solution Co., Ltd., Daejeon (Korea, Republic of)

2015-07-01

The condition of nuclear power plant in the event of station black out (SBO) accompanying large-scale natural disaster exceeding design basis accident (DBA) was evaluated. Additional scenarios were added to the evaluation to review capability of the plant to endure different conditions with different actions. The analysis resulted that the key action required from the operator was to ensure the opening of main steam safety valves (MSSVs) in the secondary side and of motor-operated valves for high pressure injection of Emergency Core Cooling System (HPECCS) to mitigate accidents or extend the cliff edge. (author)

Development of Accident Scenarios and Quantification Methodology for RAON Accelerator

International Nuclear Information System (INIS)

Lee, Yongjin; Jae, Moosung

2014-01-01

The RIsp (Rare Isotope Science Project) plans to provide neutron-rich isotopes (RIs) and stable heavy ion beams. The accelerator is defined as radiation production system according to Nuclear Safety Law. Therefore, it needs strict operate procedures and safety assurance to prevent radiation exposure. In order to satisfy this condition, there is a need for evaluating potential risk of accelerator from the design stage itself. Though some of PSA researches have been conducted for accelerator, most of them focus on not general accident sequence but simple explanation of accident. In this paper, general accident scenarios are developed by Event Tree and deduce new quantification methodology of Event Tree. In this study, some initial events, which may occur in the accelerator, are selected. Using selected initial events, the accident scenarios of accelerator facility are developed with Event Tree. These results can be used as basic data of the accelerator for future risk assessments. After analyzing the probability of each heading, it is possible to conduct quantification and evaluate the significance of the accident result. If there is a development of the accident scenario for external events, risk assessment of entire accelerator facility will be completed. To reduce the uncertainty of the Event Tree, it is possible to produce a reliable data via the presented quantification techniques

A simplified approach to evaluating severe accident source term for PWR

International Nuclear Information System (INIS)

Huang, Gaofeng; Tong, Lili; Cao, Xuewu

2014-01-01

Highlights: • Traditional source term evaluation approaches have been studied. • A simplified approach of source term evaluation for 600 MW PWR is studied. • Five release categories are established. - Abstract: For early design of NPPs, no specific severe accident source term evaluation was considered. Some general source terms have been used for some NPPs. In order to implement a best estimate, a special source term evaluation should be implemented for an NPP. Traditional source term evaluation approaches (mechanism approach and parametric approach) have some difficulties associated with their implementation. The traditional approaches are not consistent with cost-benefit assessment. A simplified approach for evaluating severe accident source term for PWR is studied. For the simplified approach, a simplified containment event tree is established. According to representative cases selection, weighted coefficient evaluation, computation of representative source term cases and weighted computation, five containment release categories are established, including containment bypass, containment isolation failure, containment early failure, containment late failure and intact containment

Environmental radioactivity and dose evaluation in Taiwan after the Chernobyl accident

International Nuclear Information System (INIS)

Chung, C.E.

1989-01-01

A substantial increase in fission product activity was observed in various environmental samples taken in Taiwan after the Chernobyl accident. The concentration of long-lived fission products in air above ground, precipitation, grass, vegetation and milk were monitored in the next 7 wk. The individual effective dose equivalent committed by the first year of exposure and intake following the accident were evaluated. Average individual doses for the population in Taiwan are estimated at 0.9 microSv due to global fallout from the Chernobyl accident. This value is lower than that reported in neighboring countries in the Far East and poses no increased health impact to the public in Taiwan

Iodine chemistry effect on source term assessments. A MELCOR 186 YT study of a PWR severe accident sequence

International Nuclear Information System (INIS)

Herranz, Luis E.; Garcia, Monica; Otero, Bernadette

2009-01-01

Level-2 Probabilistic Safety Analysis has demonstrated to be a powerful tool to give insights into multiple aspects concerning severe accidents: phenomena with the greatest potential to lead to containment failure, safety systems performance and, even, to identify any additional accident management that could mitigate the consequences of such an even, etc. A major result of level-2 PSA is iodine content in Source Term since it is the main responsible for the radiological impact during the first few days after a hypothetical severe accident. Iodine chemistry is known to considerably affect iodine behavior and although understanding has improved substantially since the early 90's, a thorough understanding is still missing and most PSA studies do not address it when assessing severe accident scenarios. This paper emphasizes the quantitative and qualitative significance of considering iodine chemistry in level-2 PSA estimates. To do so a cold leg break, low pressure severe accident sequence of an actual pressurized water reactor has been analyzed with the MELCOR 1.8.6 YT code. Two sets of calculations, with and without chemistry, have been carried out and compared. The study shows that iodine chemistry could result in an iodine release to environment about twice higher, most of which would consist of around 60% of iodine in gaseous form. From these results it is concluded that exploratory studies on the potential effect of iodine chemistry on source term estimates should be carried out. (author)

Safety assurance logic techniques for evaluation of accident prevention and mitigation

International Nuclear Information System (INIS)

McWethy, L.M.; Hagan, J.W.

1976-01-01

Safety assurance methods have been developed and applied in reactor safety assessments of FFTF. These methods promote visibility of the total safety provided by the plant, both in prevention of off-normal or accident conditions as well as provision of various features which terminate conditions within acceptable bounds if such conditions should occur. One of the primary techniques applied in safety assurance is the development of safety assurance diagrams. These diagrams explicitly identify the multiple lines of defense which prevent accident progression. The diagrams graphically demonstrate the defense-in-depth provided by the plant for each postulated occurrence. Lines of defense are shown against ever having an occurrence in the first place; thus giving appropriate emphasis on accident prevention, and visibility to the designer's role in promoting this level of safety. These diagrams, or accident process trees, also show graphically the various paths of postulated accident progression to their logical termination. Evaluation of the importance and strength of each line-of-defense assures fulfillment of the safety objectives of the overall plant system

MCCI study for Pressurized Heavy Water Reactor under hypothetical accident condition

International Nuclear Information System (INIS)

Verma, Vishnu; Mukhopadhyay, Deb; Chatterjee, B.; Singh, R.K.; Vaze, K.K.

2011-01-01

In case of severe core damage accident in Pressurized Heavy Water Reactor (PHWR), large amount of molten corium is expected to come out into the calandria vault due to failure of calandria vessel. Molten corium at high temperature is sufficient to decompose and ablate concrete. Such attack could fail CV by basement penetration. Since containment is ultimate barrier for activity release. The Molten Core Concrete Interaction (MCCI) of the resulting pool of debris with the concrete has been identified as an important part of the accident sequence. MCCI Analysis has been carried out for PHWR for a hypothetical accident condition where total core material is considered to be relocated in calandria vault. Concrete ablation rate in vertical and radial direction is evaluated for rectangular geometry using MEDICIS module of ASTEC Code. Amount of gases released during MCCI is also evaluated. (author)

Analysis of accident sequences and source terms at treatment and storage facilities for waste generated by US Department of Energy waste management operations. Volume 1: Sections 1-9

International Nuclear Information System (INIS)

Mueller, C.; Nabelssi, B.; Roglans-Ribas, J.; Folga, S.; Policastro, A.; Freeman, W.; Jackson, R.; Mishima, J.; Turner, S.

1996-12-01

This report documents the methodology, computational framework, and results of facility accident analyses performed for the US Department of Energy (DOE) Waste Management Programmatic Environmental Impact Statement (WM PEIS). The accident sequences potentially important to human health risk are specified, their frequencies assessed, and the resultant radiological and chemical source terms evaluated. A personal-computer-based computational framework and database have been developed that provide these results as input to the WM PEIS for the calculation of human health risk impacts. The WM PEIS addresses management of five waste streams in the DOE complex: low-level waste (LLW), hazardous waste (HW), high-level waste (HLW), low-level mixed waste (LLMW), and transuranic waste (TRUW). Currently projected waste generation rates, storage inventories, and treatment process throughputs have been calculated for each of the waste streams. This report summarizes the accident analyses and aggregates the key results for each of the waste streams. Source terms are estimated, and results are presented for each of the major DOE sites and facilities by WM PEIS alternative for each waste stream. Key assumptions in the development of the source terms are identified. The appendices identify the potential atmospheric release of each toxic chemical or radionuclide for each accident scenario studied. They also discuss specific accident analysis data and guidance used or consulted in this report

Evaluation of upper limit of accident probability in a nuclear reactor in Brazil

International Nuclear Information System (INIS)

Rosa, L.P.

1979-01-01

This work calls attention to the great probability of accident in a pessimist vision regarding optimist one. The author uses the upper limit presented in Ford Foundation report and applies it on brazilian case to an evaluation of risk of reactor accident in Brazil. (C.M.)

Insights from the interim reliability evaluation program pertinent to reactor safety issues

International Nuclear Information System (INIS)

Carlson, D.D.

1983-01-01

The Interim Reliability Evaluation Program (IREP) consisted of concurrent probabilistic analyses of four operating nuclear power plants. This paper presents and integrated view of the results of the analyses drawing insights pertinent to reactor safety. The importance to risk of accident sequences initiated by transients and small loss-of-coolant accidents was confirmed. Support systems were found to contribute significantly to the sets of dominant accident sequences, either due to single failures which could disable one or more mitigating systems or due to their initiating plant transients. Human errors in response to accidents also were important risk contributors. Consideration of operator recovery actions influences accident sequence frequency estimates, the list of accident sequences dominating core melt, and the set of dominant risk contributors. Accidents involving station blackout, reactor coolant pump seal leaks and ruptures, and loss-of-coolant accidents requiring manual initiation of coolant injection were found to be risk significant

Potential for containment leak paths through electrical penetration assemblies under severe accident conditions

International Nuclear Information System (INIS)

Sebrell, W.

1983-07-01

The leakage behavior of containments beyond design conditions and knowledge of failure modes is required for evaluation of mitigation strategies for severe accidents, risk studies, emergency preparedness planning, and siting. These studies are directed towards assessing the risk and consequences of severe accidents. An accident sequence analysis conducted on a Boiling Water Reactor (BWR), Mark I (MK I), indicated very high temperatures in the dry-well region, which is the location of the majority of electrical penetration assemblies. Because of the high temperatures, it was postulated in the ORNL study that the sealants would fail and all the electrical penetration assemblies would leak before structural failure would occur. Since other containments had similar electrical penetration assemblies, it was concluded that all containments would experience the same type of failure. The results of this study, however, show that this conclusion does not hold for PWRs because in the worst accident sequence, the long time containment gases stabilize to 350 0 F. BWRs, on the other hand, do experience high dry-well temperatures and have a higher potential for leakage

Managing severe reactor accidents. A review and evaluation of our knowledge on reactor accidents and accident management

International Nuclear Information System (INIS)

Gustavsson, Veine

2002-11-01

The report gives a review of the results from the last years research on severe reactor accidents, and an opinion on the possibilities to refine the present strategies for accident management in Swedish and Finnish BWRs. The following aspect of reactor accidents are the major themes of the study: 1. Early pressure relief from hydrogen production; 2. Recriticality in re-flooded, degraded core; 3. Melt-through; 4. Steam explosion after melt-through; 5. Coolability of the melt after after melt-through; 6. Hydrogen fire in the reactor containment; 7. Leaking containment; 8. Hydrogen fire in the reactor building; 9. Long-time developments after a severe accident; 10. Accidents during shutdown for overhaul; 11. Information need for remedial actions. Possibilities for improving the strategies in each of these areas are discussed. The review shows that our knowledge is sufficient in the areas 1, 2, 4, 6, 8. For the other areas, more research is needed

Development of Safety Significance Evaluation Program for Accidents and Events in NPPs

International Nuclear Information System (INIS)

Yang, Hui Chang; Hong, Seok Jin; Cho, Nam Chul; Chung, Dae Wook; Lee, Chang Joo

2010-01-01

To evaluate the significance in terms of safety for the accidents and events occurred in nuclear power plants using probabilistic safety assessment techniques can provide useful insights to the regulator. Based on the quantified risk information of accident or event occurred, regulators can decide which regulatory areas should be focused than the others. To support these regulatory analysis activities, KINS-ASP program was developed. KINS-ASP program can supports the risk increase due to the occurred accidents or events by providing the graphic interfaces and linked quantification engines for the PSA experts and non- PSA acquainted regulators both

The yellow cake accident at the Ezeiza Airport

International Nuclear Information System (INIS)

Rodriguez, C.E.; Puntarulo, L.J.; Canibano, J.A.

1989-01-01

In January 1987 several drums containing yellow cake fell from about six meters during the loading operation of a Boeing 747 T-100 cargo aircraft. As a result of the accident, about 50% of the 38 drums involved lost their lids and a fraction of the radioactive content was released on an area of about 200 meters squared. Small amounts of yellow cake were dispersed down wind until about 100 meters from the accident place. The shipment was prepared for transport in standard 200 liter steel drums fulfilling the applicable Transport Regulations and the accident was the consequence of an erroneous operation during the cargo associated with a mechanical failure of the cargo lift. In order to avoid human contamination, immediate action was taken by the airport emergency team and in the meantime, the specialized groups of the National Atomic Energy Commission and the Federal Fire Brigades, were convened to take care of the decontamination and radiological evaluation problems. This paper describes the accidental sequences, the accident scenery, the countermeasures taken, the recovery and decontamination actions, and finally, as a conclusion, a brief description of the toxic and radiological aspects of the accident's mode

Development of the severe accident risk information database management system SARD

International Nuclear Information System (INIS)

Ahn, Kwang Il; Kim, Dong Ha

2003-01-01

The main purpose of this report is to introduce essential features and functions of a severe accident risk information management system, SARD (Severe Accident Risk Database Management System) version 1.0, which has been developed in Korea Atomic Energy Research Institute, and database management and data retrieval procedures through the system. The present database management system has powerful capabilities that can store automatically and manage systematically the plant-specific severe accident analysis results for core damage sequences leading to severe accidents, and search intelligently the related severe accident risk information. For that purpose, the present database system mainly takes into account the plant-specific severe accident sequences obtained from the Level 2 Probabilistic Safety Assessments (PSAs), base case analysis results for various severe accident sequences (such as code responses and summary for key-event timings), and related sensitivity analysis results for key input parameters/models employed in the severe accident codes. Accordingly, the present database system can be effectively applied in supporting the Level 2 PSA of similar plants, for fast prediction and intelligent retrieval of the required severe accident risk information for the specific plant whose information was previously stored in the database system, and development of plant-specific severe accident management strategies

Development of the severe accident risk information database management system SARD

Energy Technology Data Exchange (ETDEWEB)

Ahn, Kwang Il; Kim, Dong Ha

2003-01-01

The main purpose of this report is to introduce essential features and functions of a severe accident risk information management system, SARD (Severe Accident Risk Database Management System) version 1.0, which has been developed in Korea Atomic Energy Research Institute, and database management and data retrieval procedures through the system. The present database management system has powerful capabilities that can store automatically and manage systematically the plant-specific severe accident analysis results for core damage sequences leading to severe accidents, and search intelligently the related severe accident risk information. For that purpose, the present database system mainly takes into account the plant-specific severe accident sequences obtained from the Level 2 Probabilistic Safety Assessments (PSAs), base case analysis results for various severe accident sequences (such as code responses and summary for key-event timings), and related sensitivity analysis results for key input parameters/models employed in the severe accident codes. Accordingly, the present database system can be effectively applied in supporting the Level 2 PSA of similar plants, for fast prediction and intelligent retrieval of the required severe accident risk information for the specific plant whose information was previously stored in the database system, and development of plant-specific severe accident management strategies.

Evaluation of heatup and recovery in a loss of feedwater accident with multiple failure

International Nuclear Information System (INIS)

Bang, Young Seok; Seul, Kwang Won; Kim, Hho Jung

1991-01-01

A loss of feedwater accident with multiple failure has been studied in order to identify the potential severity of the accident when compared with the design basis accident in PWR. The PCS heatup and recovery mode in a LOFA with multiple failure was evaluated using the LOFT L9-1/L3-3 experiment. From experimental result, 4 separable subphase were identified and the associated phenomena were also addressed

The Use of Accidents and Traffic Offences as Criteria for Evaluating Courses in Driver Education.

Science.gov (United States)

Shaoul, Jean

A road safety study was conducted by the University of Salford, Great Britain, in order to evaluate the effects of secondary level driver education in reducing the occurrence of accidents. It examines the feasibility of using accidents and traffic offenses as criteria for evaluating courses in driver education. To achieve this objective, 1,800…

Accident analysis for transuranic waste management alternatives in the U.S. Department of Energy waste management program

International Nuclear Information System (INIS)

Nabelssi, B.; Mueller, C.; Roglans-Ribas, J.; Folga, S.; Tompkins, M.; Jackson, R.

1995-01-01

Preliminary accident analyses and radiological source term evaluations have been conducted for transuranic waste (TRUW) as part of the US Department of Energy (DOE) effort to manage storage, treatment, and disposal of radioactive wastes at its various sites. The approach to assessing radiological releases from facility accidents was developed in support of the Office of Environmental Management Programmatic Environmental Impact Statement (EM PEIS). The methodology developed in this work is in accordance with the latest DOE guidelines, which consider the spectrum of possible accident scenarios in the implementation of various actions evaluated in an EIS. The radiological releases from potential risk-dominant accidents in storage and treatment facilities considered in the EM PEIS TRUW alternatives are described in this paper. The results show that significant releases can be predicted for only the most severe and extremely improbable accidents sequences

Evaluation of severe accident environmental conditions taking accident management strategy into account for equipment survivability assessments

International Nuclear Information System (INIS)

Lee, Byung Chul; Jeong, Ji Hwan; Na, Man Gyun; Kim, Soong Pyung

2003-01-01

This paper presents a methodology utilizing accident management strategy in order to determine accident environmental conditions in equipment survivability assessments. In case that there is well-established accident management strategy for specific nuclear power plant, an application of this tool can provide a technical rationale on equipment survivability assessment so that plant-specific and time-dependent accident environmental conditions could be practically and realistically defined in accordance with the equipment and instrumentation required for accident management strategy or action appropriately taken. For this work, three different tools are introduced; Probabilistic Safety Assessment (PSA) outcomes, major accident management strategy actions, and Accident Environmental Stages (AESs). In order to quantitatively investigate an applicability of accident management strategy to equipment survivability, the accident simulation for a most likely scenario in Korean Standard Nuclear Power Plants (KSNPs) is performed with MAAP4 code. The Accident Management Guidance (AMG) actions such as the Reactor Control System (RCS) depressurization, water injection into the RCS, the containment pressure and temperature control, and hydrogen concentration control in containment are applied. The effects of these AMG actions on the accident environmental conditions are investigated by comparing with those from previous normal accident simulation, especially focused on equipment survivability assessment. As a result, the AMG-involved case shows the higher accident consequences along the accident environmental stages

Radionuclide release calculations for selected severe accident scenarios

International Nuclear Information System (INIS)

Denning, R.S.; Leonard, M.T.; Cybulskis, P.; Lee, K.W.; Kelly, R.F.; Jordan, H.; Schumacher, P.M.; Curtis, L.A.

1990-08-01

This report provides the results of source term calculations that were performed in support of the NUREG-1150 study. ''Severe Accident Risks: An Assessment for Five US Nuclear Power Plants.'' This is the sixth volume of a series of reports. It supplements results presented in the earlier volumes. Analyses were performed for three of the NUREG-1150 plants: Peach Bottom, a Mark I, boiling water reactor; Surry, a subatmospheric containment, pressurized water reactor; and Sequoyah, an ice condenser containment, pressurized water reactor. Complete source term results are presented for the following sequences: short term station blackout with failure of the ADS system in the Peach Bottom plant; station blackout with a pump seal LOCA for the Surry plant; station blackout with a pump seal LOCA in the Sequoyah plant; and a very small break with loss of ECC and spray recirculation in the Sequoyah plant. In addition, some partial analyses were performed which did not require running all of the modules of the Source Term Code Package. A series of MARCH3 analyses were performed for the Surry and Sequoyah plants to evaluate the effects of alternative emergency operating procedures involving primary and secondary depressurization on the progress of the accident. Only thermal-hydraulic results are provided for these analyses. In addition, three accident sequences were analyzed for the Surry plant for accident-induced failure of steam generator tubes. In these analyses, only the transport of radionuclides within the primary system and failed steam generator were examined. The release of radionuclides to the environment is presented for the phase of the accident preceding vessel meltthrough. 17 refs., 176 figs., 113 tabs

Evaluation of In-Vessel Corium Retention under a Severe Accident

Energy Technology Data Exchange (ETDEWEB)

Park, Rae-Joon; Kang, Kyung-Ho; Ha, Kwang-Soon; Kim, Jong-Tae; Koo, Kil-Mo; Cho, Young-Ro; Hong, Seong-Wan; Kim, Sang-Baik; Kim, Hee-Dong

2008-02-15

The current study on In-Vessel corium Retention and its application activities to the actual nuclear power plant have been reviewed and discussed in this study. Severe accident sequence which determines an initial condition of the IVR has been evaluated and late phase melt progression, heat transfer on the outer reactor vessel, and in-vessel corium cooling mechanism have been estimated in detail. During the high pressure sequence of the reactor coolant system, a natural circulation flow of the hot steam leads to a failure of the pressurizer surge line before the reactor vessel failure, which leads to a rapid decrease of the reactor coolant system pressure. The results of RASPLAV/MASCA study by OECD/NEA have shown that a melt stratification has occurred in the lower plenum of the reactor vessel. In particular, laver inversion has occurred, which is that a high density of the metal melt moves to the lower part of the oxidic melt layer. A method of heat transfer enhancement on the outer reactor vessel is an optimal design of the reactor vessel insulation for an increase of the natural circulation flow between the outer reactor vessel and the its insulation, and an increase of the critical Heat flux on the outer reactor vessel by using various method, such as Nono fluid, coated reactor vessel, and so on. An increase method of the in-vessel melt cooling is a development of the In-vessel core catcher and a decrease of focusing effect in the metal layer.

Probabilistic Accident Progression Analysis with application to a LMFBR design

International Nuclear Information System (INIS)

Jamali, K.M.

1982-01-01

A method for probabilistic analysis of accident sequences in nuclear power plant systems referred to as ''Probabilistic Accident Progression Analysis'' (PAPA) is described. Distinctive features of PAPA include: (1) definition and analysis of initiator-dependent accident sequences on the component level; (2) a new fault-tree simplification technique; (3) a new technique for assessment of the effect of uncertainties in the failure probabilities in the probabilistic ranking of accident sequences; (4) techniques for quantification of dependent failures of similar components, including an iterative technique for high-population components. The methodology is applied to the Shutdown Heat Removal System (SHRS) of the Clinch River Breeder Reactor Plant during its short-term (0 -2 . Major contributors to this probability are the initiators loss of main feedwater system, loss of offsite power, and normal shutdown

Evaluating Occupational Accidents and Their Indices In a Refining and Distributing Company of Petroleum Products of Mahshahr 2008-2010

Directory of Open Access Journals (Sweden)

A. Ansarimoghaddam

2016-01-01

Full Text Available Technological progress and oil industry development accompanies have a high rate of risk. This study was conducted with the aim of evaluating occupational accidents and related indicators for decreasing the number of damages by offering control measures. In this descriptive-analytical study, essential information was extracted from the records and agendas of the technical safety committee and the evaluation of accident frequency was done based on the accident type, the time and the location of its occurrence, environmental condition, root factors, and demographic variables of the injured. The relationship between repetition, severity, frequency of the accidents and marital status of the company’s personnel was also studied. Accident analysis was done by Chi square test . The occurrence of about 102 accidents was reported in an incident evaluation, which was done between the years 2008 and 2010. The average age of the injured was 29.1± 8.61. Accidents and clashes were 31.4% of the accidents and falling from height 21.6% of them. Many of the accidents occurred in plumbing activities (24.5%, tank construction (23.5%, and civil operations (15.7%. 47% of the accidents happened in 2009, 43% in 2010, and 10% in 2008. Occurrence rate of accidents was 48.1 and their intensity rate equaled 0.15 for one million working hours. The relationship of accident type and marital status was a meaningful relationship based on Chi-square test (P = 0.014; this test showed the relationship of accident type and its reasons a significant one as well. (P = 0.035 Considering the calculated coefficients and evaluated factors in this study, safety training, constant inquiring of sub-activities, inserting safety and HSE provisions and guidelines to the contractors’ contracts and monitoring their application would be effective in decreasing the number accidents. .

MELCOR assessment of sequential severe accident mitigation actions under SGTR accident

International Nuclear Information System (INIS)

Choi, Wonjun; Jeon, Joongoo; Kim, Nam Kyung; Kim, Sung Joong

2017-01-01

The representative example of the severe accident studies using the severe accident code is investigation of effectiveness of developed severe accident management (SAM) strategy considering the positive and adverse effects. In Korea, some numerical studies were performed to investigate the SAM strategy using various severe accident codes. Seo et.al performed validation of RCS depressurization strategy and investigated the effect of severe accident management guidance (SAMG) entry condition under small break loss of coolant accident (SBLOCA) without safety injection (SI), station blackout (SBO), and total loss of feed water (TLOFW) scenarios. The SGTR accident with the sequential mitigation actions according to the flow chart of SAMG was simulated by the MELCOR 1.8.6 code. Three scenariospreventing the RPV failure were investigated in terms of fission product release, hydrogen risk, and the containment pressure. Major conclusions can be summarized as follows: (1) According to the flow chart of SAMG, RPV failure can be prevented depending on the method of RCS depressurization. (2) To reduce the release of fission product during the injecting into SGs, a temporary opening of SDS before the injecting into SGs was suggested. These modified sequences of mitigation actions can reduce the release of fission product and the adverse effect of SDS.

Review of the TMI-2 accident evaluation and vessel investigation projects

Energy Technology Data Exchange (ETDEWEB)

Ladekarl Thomsen, Knud

1998-03-01

The results of the TMI-2 Accident Evaluation Programme and the Vessel Investigation Project have been reviewed as part of a literature study on core meltdown and in-vessel coolability. The emphasis is placed on the late phase melt progression, which is of special relevance to the NKS-sponsored RAK-2.1 project on Severe Accident Phenomenology. The body of the report comprises three main sections, The TMI-2 Accident Scenario, Core Region and Relocation Path Investigations, and Lower Head Investigations. In the final discussion, the lower head gap formation mechanism is explained in terms of thermal contraction and fracturing of the debris crust. This model seems more plausible than the MAAP model based on creep expansion of the lower head. (au) 1 tab., 33 ills., 31 refs.

Study on mitigation of in-vessel release of fission products in severe accidents of PWR

International Nuclear Information System (INIS)

Huang, G.F.; Tong, L.L.; Li, J.X.; Cao, X.W.

2010-01-01

Research highlights: → In-vessel release of fission products in severe accidents for 600 MW PWR is analyzed. → Mitigation effect of primary feed-and-bleed on in-vessel release is investigated. → Mitigation effect of secondary feed-and-bleed on in-vessel release is studied. → Mitigation effect of ex-vessel cooling on in-vessel release is evaluated. - Abstract: During the severe accidents in a nuclear power plant, large amounts of fission products release with accident progression, including in-vessel and ex-vessel release. Mitigation of fission products release is demanded for alleviating radiological consequence in severe accidents. Mitigation countermeasures to in-vessel release are studied for Chinese 600 MW pressurized water reactor (PWR), including feed-and-bleed in primary circuit, feed-and-bleed in secondary circuit and ex-vessel cooling. SBO, LOFW, SBLOCA and LBLOCA are selected as typical severe accident sequences. Based on the evaluation of in-vessel release with different startup time of countermeasure, and the coupling relationship between thermohydraulics and in-vessel release of fission products, some results are achieved. Feed-and-bleed in primary circuit is an effective countermeasure to mitigate in-vessel release of fission products, and earlier startup time of countermeasure is more feasible. Feed-and-bleed in secondary circuit is also an effective countermeasure to mitigate in-vessel release for most severe accident sequences that can cease core melt progression, e.g. SBO, LOFW and SBLOCA. Ex-vessel cooling has no mitigation effect on in-vessel release owing to inevitable core melt and relocation.

A database system for the management of severe accident risk information, SARD

International Nuclear Information System (INIS)

Ahn, K. I.; Kim, D. H.

2003-01-01

The purpose of this paper is to introduce main features and functions of a PC Windows-based database management system, SARD, which has been developed at Korea Atomic Energy Research Institute for automatic management and search of the severe accident risk information. Main functions of the present database system are implemented by three closely related, but distinctive modules: (1) fixing of an initial environment for data storage and retrieval, (2) automatic loading and management of accident information, and (3) automatic search and retrieval of accident information. For this, the present database system manipulates various form of the plant-specific severe accident risk information, such as dominant severe accident sequences identified from the plant-specific Level 2 Probabilistic Safety Assessment (PSA) and accident sequence-specific information obtained from the representative severe accident codes (e.g., base case and sensitivity analysis results, and summary for key plant responses). The present database system makes it possible to implement fast prediction and intelligent retrieval of the required severe accident risk information for various accident sequences, and in turn it can be used for the support of the Level 2 PSA of similar plants and for the development of plant-specific severe accident management strategies

A database system for the management of severe accident risk information, SARD

Energy Technology Data Exchange (ETDEWEB)

Ahn, K. I.; Kim, D. H. [KAERI, Taejon (Korea, Republic of)

2003-10-01

The purpose of this paper is to introduce main features and functions of a PC Windows-based database management system, SARD, which has been developed at Korea Atomic Energy Research Institute for automatic management and search of the severe accident risk information. Main functions of the present database system are implemented by three closely related, but distinctive modules: (1) fixing of an initial environment for data storage and retrieval, (2) automatic loading and management of accident information, and (3) automatic search and retrieval of accident information. For this, the present database system manipulates various form of the plant-specific severe accident risk information, such as dominant severe accident sequences identified from the plant-specific Level 2 Probabilistic Safety Assessment (PSA) and accident sequence-specific information obtained from the representative severe accident codes (e.g., base case and sensitivity analysis results, and summary for key plant responses). The present database system makes it possible to implement fast prediction and intelligent retrieval of the required severe accident risk information for various accident sequences, and in turn it can be used for the support of the Level 2 PSA of similar plants and for the development of plant-specific severe accident management strategies.

Evaluation of the relationship between unsafe acts and occupational accidents in a vehicle manufacturing

Directory of Open Access Journals (Sweden)

F. Fatemi

2008-10-01

Full Text Available Background and aims   Vehicle manufacturing industries are as critical sites from points of safety. Unsafe acts and unsafe conditions have been recognized as effective factors in increasing the risk of occupational accidents. In order to promote of safety conditions, it's necessary to evaluate unsafe acts of workers as the main reason of accidents. The main goal of research is evaluation of relationship between unsafe Acts with occupational accidents.   Methods   Safety behavior sampling (SBS technique was employed to conduct this study. After doing a pilot study, the number of samples and views were determined 195 and 3456  respectively. The information was then analyzed using Excel, SPSS and statistic tests.   Results   The results of the study showed that the rate of unsafe acts of studying workers was  35.4% .The study of the relationship between unsafe acts and occupational accidents via Regression Logistic test showed that if one percent increases on unsafe acts, the rate of accidents  multiply three.   Conclusion   Therefore in view of this significant correlation between unsafe acts and  occupational accidents and kind of unsafe acts, reducing or eliminating requires the investment and implementation of a program. It should be associated with behavioral safety principles and emphasis should be placed on implementing safety culture fundamentals at all organizational levels.

Investigation and evaluation for environmental impact at Fukushima Daiichi NPP accident

International Nuclear Information System (INIS)

2012-01-01

In 2012, JNES investigated the weather data and the environmental monitoring data and constructed the method to specify contribution of the environmental impact from each plant based on the dose analysis result at Unit 1-3 of Fukushima Daiichi NPP accident. JNES calculated the dose rate in an accident early stage based on analysis of a monitoring data. Moreover, JNES evaluated the dose by additional release of the radioactive material in case of assuming the loss of coolant injection to a nuclear reactor by the request of NISA. (author)

Application of probabilistic methods to accident analysis at waste management facilities

International Nuclear Information System (INIS)

Banz, I.

1986-01-01

Probabilistic risk assessment is a technique used to systematically analyze complex technical systems, such as nuclear waste management facilities, in order to identify and measure their public health, environmental, and economic risks. Probabilistic techniques have been utilized at the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico, to evaluate the probability of a catastrophic waste hoist accident. A probability model was developed to represent the hoisting system, and fault trees were constructed to identify potential sequences of events that could result in a hoist accident. Quantification of the fault trees using statistics compiled by the Mine Safety and Health Administration (MSHA) indicated that the annual probability of a catastrophic hoist accident at WIPP is less than one in 60 million. This result allowed classification of a catastrophic hoist accident as ''not credible'' at WIPP per DOE definition. Potential uses of probabilistic techniques at other waste management facilities are discussed

Severe accident considerations for modern KWU-PWR plants

International Nuclear Information System (INIS)

Eyink, J.

1987-01-01

In assumption of severe accident on modern KWU-PWR plants the author discusses on the: selection of core meltdown sequences, course of the accident, containment behaviour and source terms for fission products release to the environment

Potential for containment leak paths through electrical penetration assemblies under severe accident conditions. [PWR; BWR

Energy Technology Data Exchange (ETDEWEB)

Sebrell, W.

1983-07-01

The leakage behavior of containments beyond design conditions and knowledge of failure modes is required for evaluation of mitigation strategies for severe accidents, risk studies, emergency preparedness planning, and siting. These studies are directed towards assessing the risk and consequences of severe accidents. An accident sequence analysis conducted on a Boiling Water Reactor (BWR), Mark I (MK I), indicated very high temperatures in the dry-well region, which is the location of the majority of electrical penetration assemblies. Because of the high temperatures, it was postulated in the ORNL study that the sealants would fail and all the electrical penetration assemblies would leak before structural failure would occur. Since other containments had similar electrical penetration assemblies, it was concluded that all containments would experience the same type of failure. The results of this study, however, show that this conclusion does not hold for PWRs because in the worst accident sequence, the long time containment gases stabilize to 350/sup 0/F. BWRs, on the other hand, do experience high dry-well temperatures and have a higher potential for leakage.

Accident analyses in nuclear power plants following external initiating events and in the shutdown state. Final report; Unfallanalysen in Kernkraftwerken nach anlagenexternen ausloesenden Ereignissen und im Nichtleistungsbetrieb. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Loeffler, Horst; Kowalik, Michael; Mildenberger, Oliver; Hage, Michael

2016-06-15

The work which is documented here provides the methodological basis for improvement of the state of knowledge for accident sequences after plant external initiating events and for accident sequences which begin in the shutdown state. The analyses have been done for a PWR and for a BWR reference plant. The work has been supported by the German federal ministry BMUB under the label 3612R01361. Top objectives of the work are: - Identify relevant event sequences in order to define characteristic initial and boundary conditions - Perform accident analysis of selected sequences - Evaluate the relevance of accident sequences in a qualitative way The accident analysis is performed with the code MELCOR 1.8.6. The applied input data set has been significantly improved compared to previous analyses. The event tree method which is established in PSA level 2 has been applied for creating a structure for a unified summarization and evaluation of the results from the accident analyses. The computer code EVNTRE has been applied for this purpose. In contrast to a PSA level 2, the branching probabilities of the event tree have not been determined with the usual accuracy, but they are given in an approximate way only. For the PWR, the analyses show a considerable protective effect of the containment also in the case of beyond design events. For the BWR, there is a rather high probability for containment failure under core melt impact, but nevertheless the release of radionuclides into the environment is very limited because of plant internal retention mechanisms. This report concludes with remarks about existing knowledge gaps and with regard to core melt sequences, and about possible improvements of the plant safety.

Source terms derived from analyses of hypothetical accidents, 1950-1986

International Nuclear Information System (INIS)

Stratton, W.R.

1987-01-01

This paper reviews the history of reactor accident source term assumptions. After the Three Mile Island accident, a number of theoretical and experimental studies re-examined possible accident sequences and source terms. Some of these results are summarized in this paper

Main safety issues related to IPSN severe accident research

International Nuclear Information System (INIS)

LeComte, C.

1991-01-01

The work performed at IPSN concerning accident studies on nuclear installations is focused on the characterization of accidental sequences with three major aims: prevention, mitigation, and organization of counter-measures. As criteria to optimize all efforts made to improve nuclear safety, the radioactive dispersal in the environment must be quantified as function of internal and external radioactive products transfers. During the short-term phase of the accident, potential radioactive releases can be evaluated by the realistic code system ESCADRE. This system is validated by numerous analytical studies related to containment and fission product behavior. It will be further qualified by the results of the global experiments performed in the PHEBUS FP facility at IPSN

Benchmarking Severe Accident Computer Codes for Heavy Water Reactor Applications

International Nuclear Information System (INIS)

2013-12-01

Requests for severe accident investigations and assurance of mitigation measures have increased for operating nuclear power plants and the design of advanced nuclear power plants. Severe accident analysis investigations necessitate the analysis of the very complex physical phenomena that occur sequentially during various stages of accident progression. Computer codes are essential tools for understanding how the reactor and its containment might respond under severe accident conditions. The IAEA organizes coordinated research projects (CRPs) to facilitate technology development through international collaboration among Member States. The CRP on Benchmarking Severe Accident Computer Codes for HWR Applications was planned on the advice and with the support of the IAEA Nuclear Energy Department's Technical Working Group on Advanced Technologies for HWRs (the TWG-HWR). This publication summarizes the results from the CRP participants. The CRP promoted international collaboration among Member States to improve the phenomenological understanding of severe core damage accidents and the capability to analyse them. The CRP scope included the identification and selection of a severe accident sequence, selection of appropriate geometrical and boundary conditions, conduct of benchmark analyses, comparison of the results of all code outputs, evaluation of the capabilities of computer codes to predict important severe accident phenomena, and the proposal of necessary code improvements and/or new experiments to reduce uncertainties. Seven institutes from five countries with HWRs participated in this CRP

Evaluation of a cavity flooding strategy for the prevention of reactor vessel failure in a severe accident

Energy Technology Data Exchange (ETDEWEB)

Park, Rae Joon; Je, Moo Sung; Park, Chang Kyoo [Korea Atomic Energy Research Institute, TaeJon (Korea, Republic of)

1994-10-01

As a part of the evaluation of accident management strategies for severe accident prevention or mitigation in a station blackout scenario for YGN 3 and 4, an external vessel cooling strategy for the prevention of reactor vessel failure has been estimated using the MAAP4 computer code. The sensitivity studies have been performed such as actuating timings and the number of spray pumps used. To explore external vessel cooling strategies, containment spray pumps were actuated by varying time spanning core uncovery, core melting and relocation of molten core material. It was shown that flooding of the reactor cavity using the containment spray system may prevent reactor vessel failure but may not prevent the failure of the relocation of molten core material during the station blackout sequence of YGN 3 and 4. Reactor vessel failure can be prevented by external vessel cooling using condensed water from the operation of two containment spray pumps at the time of core melting and using water from the operation of one containment spray pumps at the time of core melting and using water from the operation of one containment spray pump at the time of core uncovery. (Author) 46 refs., 26 figs., 5 tabs.

Database on aircraft accidents

International Nuclear Information System (INIS)

Nishio, Masahide; Koriyama, Tamio

2012-09-01

The Reactor Safety Subcommittee in the Nuclear Safety and Preservation Committee published the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' as the standard method for evaluating probability of aircraft crash into nuclear reactor facilities in July 2002. In response to the report, Japan Nuclear Energy Safety Organization has been collecting open information on aircraft accidents of commercial airplanes, self-defense force (SDF) airplanes and US force airplanes every year since 2003, sorting out them and developing the database of aircraft accidents for latest 20 years to evaluate probability of aircraft crash into nuclear reactor facilities. This year, the database was revised by adding aircraft accidents in 2010 to the existing database and deleting aircraft accidents in 1991 from it, resulting in development of the revised 2011 database for latest 20 years from 1991 to 2010. Furthermore, the flight information on commercial aircrafts was also collected to develop the flight database for latest 20 years from 1991 to 2010 to evaluate probability of aircraft crash into reactor facilities. The method for developing the database of aircraft accidents to evaluate probability of aircraft crash into reactor facilities is based on the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' described above. The 2011 revised database for latest 20 years from 1991 to 2010 shows the followings. The trend of the 2011 database changes little as compared to the last year's one. (1) The data of commercial aircraft accidents is based on 'Aircraft accident investigation reports of Japan transport safety board' of Ministry of Land, Infrastructure, Transport and Tourism. 4 large fixed-wing aircraft accidents, 58 small fixed-wing aircraft accidents, 5 large bladed aircraft accidents and 114 small bladed aircraft accidents occurred. The relevant accidents for evaluating

Development of a DNBR evaluation method for the CEA ejection accident in SMART core

Energy Technology Data Exchange (ETDEWEB)

Hwang, Dae Hyun; Yoo, Y. J.; In, W. K.; Chang, M. H. [Korea Atomic Energy Research Institute, Taejon (Korea)

1999-12-01

A methodology applicable to the analysis of the CEA ejection accident in SMART is developed for the evaluation of the fraction of fuel failure caused by DNB. The transient behavior of the core thermal-hydraulic conditions is calculated by the subchannel analysis code MATRA. The minimum DNBR during the accident is calculated by KRB-1 CHF correlation considering the 1/8 symmetry of hot assembly. The variation of hot assembly power during the accident is simulated by the LTC(Limiting transient Curve) which is determined from the analysis of power distribution data resulting from the three-dimensional core dynamics calculations. The initial condition of the accident is determined by considering LOC(Limiting Conditions for Operation) of SMART core. Two different methodologies for the evaluation of DNB failure rate are established; a deterministic method based on the DNB envelope, and a probabilistic method based on the DNB probability of each fuel rod. The methodology developed in this study is applied to the analysis of CEA ejection accident in the preliminary design core of SMART. As the result, the fractions of DNB fuel failure by the deterministic method and the probabilistic method are calculated as 38.7% and 7.8%, respectively. 16 refs., 16 figs., 5 tabs. (Author)

Addressing severe accidents in the CANDU 9 design

International Nuclear Information System (INIS)

Nijhawan, S.M.; Wight, A.L.; Snell, V.G.

1998-01-01

CANDU 9 is a single-unit evolutionary heavy-water reactor based on the Bruce/Darlington plants. Severe accident issues are being systematically addressed in CANDU 9, which includes a number of unique features for prevention and mitigation of severe accidents. A comprehensive severe accident program has been formulated with feedback from potential clients and the Canadian regulatory agency. Preliminary Probabilistic Safety Analyses have identified the sequences and frequency of system and human failures that may potentially lead to initial conditions indicating onset of severe core damage. Severe accident consequence analyses have used these sequences as a guide to assess passive heat sinks for the core, and containment performance. Estimates of the containment response to mass and energy injections typical of postulated severe accidents have been made and the results are presented. We find that inherent CANDU severe accident mitigation features, such as the presence of large water volumes near the fuel (moderator and shield tank), permit a relatively slow severe accident progression under most plant damage states, facilitate debris coolability and allow ample time for the operator to arrest the progression within, progressively, the fuel channels, calandria vessel or shield tank. The large-volume CANDU 9 containment design complements these features because of the long times to reach failure

SWR-1000 concept on control of severe accidents

International Nuclear Information System (INIS)

Meyer, P.J.

1998-01-01

It is essential for the SWR-1000 probabilistic safety concept to consider the results from experiments and reliability system failure within the probabilistic safety analyses for passive systems. Active and passive safety features together reduce the probability of the occurrence of beyond design basis accidents in order to limit their consequences in accordance with the German law. As a reference case we analyzed the most probable core melt accident sequence with a very conservative assumption. An initial event, stuck open of safety and relief valves without the probability of active and passive feeding systems of the pressure vessel, was considered. Other sequences of the loss of coolant accidents lead to lower probability

Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1: Evaluation of severe accident risk during mid-loop operations. Main report. Volume 6. Part 1

Energy Technology Data Exchange (ETDEWEB)

Jo, J.; Lin, C.C.; Neymotin, L. [Brookhaven National Lab., Upton, NY (United States)] [and others

1995-05-01

During 1989, the Nuclear Regulatory Commission (NRC) initiated an extensive program to carefully examine the potential risks during low power and shutdown operations. The program includes two parallel projects being performed by Brookhaven National Laboratory (BNL) and Sandia National Laboratories (SNL). Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the plants to be studied. The objectives of the program are to assess the risks of severe accidents initiated during plant operational states other than full power operation and to compare the estimated core damage frequencies, important accident sequences and other qualitative and quantitative results with those accidents initiated during full power operation as assessed in NUREG-1150. The scope of the program includes that of a level-3 PRA. A phased approach was used in the level-1 program. In phase 1 which was completed in Fall 1991, a coarse screening analysis including internal fire and flood was performed for all plant operational states (POSs). The objective of the phase 1 study was to identify potential vulnerable plant configurations, to characterize (on a high, medium, or low basis) the potential core damage accident scenarios, and to provide a foundation for a detailed phase 2 analysis. In phase 2, mid-loop operation was selected as the plant configuration to be analyzed based on the results of the phase 1 study. The objective of the phase 2 study is to perform a detailed analysis of the potential accident scenarios that may occur during mid-loop operation, and compare the results with those of NUREG-1150. The results of the phase 2 level 2/3 study are the subject of this volume of NUREG/CR-6144, Volume 6.

Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1: Evaluation of severe accident risk during mid-loop operations. Main report. Volume 6. Part 1

International Nuclear Information System (INIS)

Jo, J.; Lin, C.C.; Neymotin, L.

1995-05-01

During 1989, the Nuclear Regulatory Commission (NRC) initiated an extensive program to carefully examine the potential risks during low power and shutdown operations. The program includes two parallel projects being performed by Brookhaven National Laboratory (BNL) and Sandia National Laboratories (SNL). Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the plants to be studied. The objectives of the program are to assess the risks of severe accidents initiated during plant operational states other than full power operation and to compare the estimated core damage frequencies, important accident sequences and other qualitative and quantitative results with those accidents initiated during full power operation as assessed in NUREG-1150. The scope of the program includes that of a level-3 PRA. A phased approach was used in the level-1 program. In phase 1 which was completed in Fall 1991, a coarse screening analysis including internal fire and flood was performed for all plant operational states (POSs). The objective of the phase 1 study was to identify potential vulnerable plant configurations, to characterize (on a high, medium, or low basis) the potential core damage accident scenarios, and to provide a foundation for a detailed phase 2 analysis. In phase 2, mid-loop operation was selected as the plant configuration to be analyzed based on the results of the phase 1 study. The objective of the phase 2 study is to perform a detailed analysis of the potential accident scenarios that may occur during mid-loop operation, and compare the results with those of NUREG-1150. The results of the phase 2 level 2/3 study are the subject of this volume of NUREG/CR-6144, Volume 6

Developement of integrated evaluation system for severe accident management

Energy Technology Data Exchange (ETDEWEB)

Kim, Dong Ha; Kim, H. D.; Park, S. Y.; Kim, K. R.; Park, S. H.; Choi, Y.; Song, Y. M.; Ahn, K. I.; Park, J. H

2005-04-01

The scope of the project includes four activities such as construction of DB, development of data base management tool, development of severe accident analysis code system and FP studies. In the construction of DB, level-1,2 PSA results and plant damage states event trees were mainly used to select the following target initiators based on frequencies: LLOCA, MLOCA, SLOCA, station black out, LOOP, LOFW and SGTR. These scenarios occupy more than 95% of the total frequencies of the core damage sequences at KSNP. In the development of data base management tool, SARD 2.0 was developed under the PC microsoft windows environment using the visual basic 6.0 language. In the development of severe accident analysis code system, MIDAS 1.0 was developed with new features of FORTRAN-90 which makes it possible to allocate the storage dynamically and to use the user-defined data type, leading to an efficient memory treatment and an easy understanding. Also for user's convenience, the input (IEDIT) and output (IPLOT) processors were developed and implemented into the MIDAS code. For the model development of MIDAS concerning the FP behavior, the one dimensional thermophoresis model was developed and it gave much improvement to predict the amount of FP deposited on the SG U-tube. Also the source term analysis methodology was set up and applied to the KSNP and APR1400.

Assessment of PASS Effectiveness under Severe Accidents in Nuclear Power Plants

International Nuclear Information System (INIS)

Choi, Yu Jung; Lee, Sung Bok; Kim, Hyeong Taek; Lee, Jin Yong

2008-01-01

Following the accident at Three Mile Island Unit 2 (TMI-2) on March 28, 1979, the USNRC formed a lessons-learned Task Force to identify and evaluate safety concerns originating with the TMI-2 accident. NUREG-0578 documented the results of the task force effort. One of the recommendations of the task force was for licensees to upgrade the capability to obtain samples from the reactor coolant system and containment atmosphere under high radioactivity conditions and to provide the capability for chemical and spectral analyses of high-level samples on site. NUREG-0737 contained the details of the TMI recommendations that were to be implemented by the licensees. Additional criteria for post accident sampling system(PASS) were issued by Regulatory Guide 1.97. As the results, PASS has been installed on nuclear power plants(NPPs) in Korea as well as United States. However, significant improvements have been achieved since the TMI-2 accident in the areas of understanding risks associated with nuclear plant operations and developing better strategies for managing the response to potential severe accidents at NPPs. Thus, the requirements for PASS have been re-evaluated in some reports. According to the reports, the samples and measurements from PASS do not contribute significantly to emergency management response to severe accidents due to the long analyzing time, 3 hours. Hence, this paper focused on the development of the quantitative analysis methodology to analyze the sequence of the severe accident in Yonggwang nuclear power plants (YGN) and presented the results of the analysis according to the developed methodology

Review of the severe accident risk reduction program (SARRP) containment event trees

International Nuclear Information System (INIS)

1986-05-01

A part of the Severe Accident Risk Reduction Program, researchers at Sandia National Laboratories have constructed a group of containment event trees to be used in the analysis of key accident sequences for light water reactors (LWR) during postulated severe accidents. The ultimate goal of the program is to provide to the NRC staff a current assessment of the risk from severe reactor accidents for a group of five light water reactors. This review specifically focuses on the development and construction of the containment event trees and the results for containment failure probability, modes and timing. The report first gives the background on the program, the review criteria, and a summary of the observations, findings and recommendations. secondly, the individual reviews of each committee member on the event trees is presented. Finally, a review is provided on the computer model used to construct and evaluate the event trees

Severe accident testing of electrical penetration assemblies

International Nuclear Information System (INIS)

Clauss, D.B.

1989-11-01

This report describes the results of tests conducted on three different designs of full-size electrical penetration assemblies (EPAs) that are used in the containment buildings of nuclear power plants. The objective of the tests was to evaluate the behavior of the EPAs under simulated severe accident conditions using steam at elevated temperature and pressure. Leakage, temperature, and cable insulation resistance were monitored throughout the tests. Nuclear-qualified EPAs were produced from D. G. O'Brien, Westinghouse, and Conax. Severe-accident-sequence analysis was used to generate the severe accident conditions (SAC) for a large dry pressurized-water reactor (PWR), a boiling-water reactor (BWR) Mark I drywell, and a BWR Mark III wetwell. Based on a survey conducted by Sandia, each EPA was matched with the severe accident conditions for a specific reactor type. This included the type of containment that a particular EPA design was used in most frequently. Thus, the D. G. O'Brien EPA was chosen for the PWR SAC test, the Westinghouse was chosen for the Mark III test, and the Conax was chosen for the Mark I test. The EPAs were radiation and thermal aged to simulate the effects of a 40-year service life and loss-of-coolant accident (LOCA) before the SAC tests were conducted. The design, test preparations, conduct of the severe accident test, experimental results, posttest observations, and conclusions about the integrity and electrical performance of each EPA tested in this program are described in this report. In general, the leak integrity of the EPAs tested in this program was not compromised by severe accident loads. However, there was significant degradation in the insulation resistance of the cables, which could affect the electrical performance of equipment and devices inside containment at some point during the progression of a severe accident. 10 refs., 165 figs., 16 tabs

Evaluation of LLNL's Nuclear Accident Dosimeters at the CALIBAN Reactor September 2010

International Nuclear Information System (INIS)

Hickman, D.P.; Wysong, A.R.; Heinrichs, D.P.; Wong, C.T.; Merritt, M.J.; Topper, J.D.; Gressmann, F.A.; Madden, D.J.

2011-01-01

participants were limited in what they were allowed to do at the Caliban and Silene exercises and testing of various elements of the nuclear accident dosimetry programs cannot always be performed as guests at other sites, it has become evident that DOE needs its own capability to test nuclear accident dosimeters. Angular dependence determination and correction factors for NADs desperately need testing as well as more evaluation regarding the correct determination of gamma doses. It will be critical to properly design any testing facility so that the necessary experiments can be performed by DOE laboratories as well as guest laboratories. Alternate methods of dose assessment such as using various metals commonly found in pockets and clothing have yet to be evaluated. The DOE is planning to utilize the Godiva or Flattop reactor for testing nuclear accident dosimeters. LLNL has been assigned the primary operational authority for such testing. Proper testing of nuclear accident dosimeters will require highly specific characterization of the pulse fields. Just as important as the characterization of the pulsed fields will be the design of facilities used to process the NADs. Appropriate facilities will be needed to allow for early access to dosimeters to test and develop quick sorting techniques. These facilities will need appropriate laboratory preparation space and an area for measurements. Finally, such a facility will allow greater numbers of LLNL and DOE laboratory personnel to train on the processing and interpretation of nuclear accident dosimeters and results. Until this facility is fully operational for test purposes, DOE laboratories may need to continue periodic testing as guests of other reactor facilities such as Silene and Caliban.

Identification and assessment of BWR in-vessel severe accident mitigation strategies

International Nuclear Information System (INIS)

Hodge, S.A.; Kress, T.S.; Cleveland, J.C.; Petek, M.

1992-01-01

This paper briefly describes the results of work carried out in support of the US Nuclear Regulatory Commission Accident Management Research Program to evaluate the effectiveness and feasibility of current and proposed strategies for BWR severe accident management. These results are described in detail in the just-released report Identification and Assessment of BWR In-Vessel Severe Accident Mitigation Strategies, NUREG/CR-5869, which comprises three categories of findings. First, an assessment of the current status of accident management strategies for the mitigation of in-vessel events for BWR severe accident sequences is combined with a review of the BWR Owners' Group Emergency Procedure Guidelines (EPGs) to determine the extent to which they currently address the characteristic events of an unmitigated severe accident. Second, where considered necessary, new candidate accident management strategies are proposed for mitigation of the late-phase (after core damage has occurred) events. Finally, two of the four candidate strategies identified by this effort are assessed in detail. These are (1) preparation of a boron solution for reactor vessel refill should control blade damage occur during a period of temporary core dryout and (2) containment flooding to maintain the core debris within the reactor vessel if the injection systems cannot be restored

Identification and assessment of BWR in-vessel severe accident mitigation strategies

Energy Technology Data Exchange (ETDEWEB)

Hodge, S.A.; Cleveland, J.C.; Kress, T.S.; Petek, M. [Oak Ridge National Lab., TN (United States)

1992-10-01

This report provides the results of work carried out in support of the US Nuclear Regulatory Commission Accident Management Research Program to develop a technical basis for evaluating the effectiveness and feasibility of current and proposed strategies for boiling water reactor (BWR) severe accident management. First, the findings of an assessment of the current status of accident management strategies for the mitigation of in-vessel events for BWR severe accident sequences are described. This includes a review of the BWR Owners` Group Emergency Procedure Guidelines (EPGSs) to determine the extent to which they currently address the characteristic events of an unmitigated severe accident and to provide the basis for recommendations for enhancement of accident management procedures. Second, where considered necessary, new candidate accident management strategies are proposed for mitigation of the late-phase (after core damage has occurred) events. Finally, recommendations are made for consideration of additional strategies where warranted, and two of the four candidate strategies identified by this effort are assessed in detail: (1) preparation of a boron solution for reactor vessel refill should control blade damage occur during a period of temporary core dryout and (2) containment flooding to maintain the core debris within the reactor vessel if the injection systems cannot be restored.

Identification and assessment of BWR in-vessel severe accident mitigation strategies

International Nuclear Information System (INIS)

Hodge, S.A.; Cleveland, J.C.; Kress, T.S.; Petek, M.

1992-10-01

This report provides the results of work carried out in support of the US Nuclear Regulatory Commission Accident Management Research Program to develop a technical basis for evaluating the effectiveness and feasibility of current and proposed strategies for boiling water reactor (BWR) severe accident management. First, the findings of an assessment of the current status of accident management strategies for the mitigation of in-vessel events for BWR severe accident sequences are described. This includes a review of the BWR Owners' Group Emergency Procedure Guidelines (EPGSs) to determine the extent to which they currently address the characteristic events of an unmitigated severe accident and to provide the basis for recommendations for enhancement of accident management procedures. Second, where considered necessary, new candidate accident management strategies are proposed for mitigation of the late-phase (after core damage has occurred) events. Finally, recommendations are made for consideration of additional strategies where warranted, and two of the four candidate strategies identified by this effort are assessed in detail: (1) preparation of a boron solution for reactor vessel refill should control blade damage occur during a period of temporary core dryout and (2) containment flooding to maintain the core debris within the reactor vessel if the injection systems cannot be restored

Validation of severe accident management guidance for the wolsong plants

International Nuclear Information System (INIS)

Park, S. Y.; Jin, Y. H.; Kim, S. D.; Song, Y. M.

2006-01-01

Full text: Full text: The severe accident management(SAM) guidance has been developed for the Wolsong nuclear power plants in Korea. The Wolsong plants are 700MWe CANDU-type reactors with heavy water as the primary coolant, natural uranium-fueled pressurized, horizontal tubes, surrounded by heavy water moderator inside a horizontal calandria vessel. The guidance includes six individual accident management strategies: (1) injection into primary heat transport system (2) injection into calandria vessel (3) injection into calandria vault (4) reduction of fission product release (5) control of reactor building condition (6) reduction of reactor building hydrogen. The paper provides the approaches to validate the SAM guidance. The validation includes the evaluation of:(l) effectiveness of accident management strategies, (2) performance of mitigation systems or components, (3) calculation aids, (4) strategy control diagram, and (5) interface with emergency operation procedure and with radiation emergency plan. Several severe accident sequences with high probability is selected from the plant specific level 2 probabilistic safety analysis results for the validation of SAM guidance. Afterward, thermal hydraulic and severe accident phenomenological analyses is performed using ISAAC(Integrated Severe Accident Analysis Code for CANDU Plant) computer program. Furthermore, the experiences obtained from a table-top-drill is also discussed

Long-Term Station Blackout Accident Analyses of a PWR with RELAP5/MOD3.3

Directory of Open Access Journals (Sweden)

Andrej Prošek

2013-01-01

Full Text Available Stress tests performed in Europe after accident at Fukushima Daiichi also required evaluation of the consequences of loss of safety functions due to station blackout (SBO. Long-term SBO in a pressurized water reactor (PWR leads to severe accident sequences, assuming that existing plant means (systems, equipment, and procedures are used for accident mitigation. Therefore the main objective was to study the accident management strategies for SBO scenarios (with different reactor coolant pumps (RCPs leaks assumed to delay the time before core uncovers and significantly heats up. The most important strategies assumed were primary side depressurization and additional makeup water to reactor coolant system (RCS. For simulations of long term SBO scenarios, including early stages of severe accident sequences, the best estimate RELAP5/MOD3.3 and the verified input model of Krško two-loop PWR were used. The results suggest that for the expected magnitude of RCPs seal leak, the core uncovery during the first seven days could be prevented by using the turbine-driven auxiliary feedwater pump and manually depressurizing the RCS through the secondary side. For larger RCPs seal leaks, in general this is not the case. Nevertheless, the core uncovery can be significantly delayed by increasing RCS depressurization.

Accident sequences and causes analysis in a hydrogen production process

Energy Technology Data Exchange (ETDEWEB)

Jae, Moo Sung; Hwang, Seok Won; Kang, Kyong Min; Ryu, Jung Hyun; Kim, Min Soo; Cho, Nam Chul; Jeon, Ho Jun; Jung, Gun Hyo; Han, Kyu Min; Lee, Seng Woo [Hanyang Univ., Seoul (Korea, Republic of)

2006-03-15

Since hydrogen production facility using IS process requires high temperature of nuclear power plant, safety assessment should be performed to guarantee the safety of facility. First of all, accident cases of hydrogen production and utilization has been surveyed. Based on the results, risk factors which can be derived from hydrogen production facility were identified. Besides the correlation between risk factors are schematized using influence diagram. Also initiating events of hydrogen production facility were identified and accident scenario development and quantification were performed. PSA methodology was used for identification of initiating event and master logic diagram was used for selection method of initiating event. Event tree analysis was used for quantification of accident scenario. The sum of all the leakage frequencies is 1.22x10{sup -4} which is similar value (1.0x10{sup -4}) for core damage frequency that International Nuclear Safety Advisory Group of IAEA suggested as a criteria.

Accident analysis. A review of the various accidents classifications

International Nuclear Information System (INIS)

Martin Martin, L.; Figueras, J.M.

1982-01-01

The objective of the accident analysis, in relation with the safety evaluation, environmental impact and emergency planning, should be to identify the total risk to the population and workers from potential accidents in the facility, analizing it over full spectrum of severity. (auth.)

Fukushima. The accident sequence and important causes. Pt. 2/3; Fukushima. Unfallablauf und wesentliche Ursachen. T. 2/3

Energy Technology Data Exchange (ETDEWEB)

Pistner, Christoph [Oeko-Institut e.V., Darmstadt (Germany). Bereich Nukleartechnik und Anlagensicherheit

2013-07-01

In this part on the accident sequence in the NPP Fukushima Daiichi on March 11, 2011 the important safety systems of a nuclear power plant are described, including the design of a nuclear boiling water reactor with Mark-II type containment, the high-pressure injection system and the systems for afterheat removal. The chronology of the accident progress in the NPP units 1-3 is described. The units 4-6 were shutdown due to revision work. Due to the earthquake an electric power transformation station close to the NPP site and the power poles were destroyed, the redundant power supply of the neighboring electricity supplier Tohoku did not work. All emergency diesel generators were flooded and destroyed resulting in the so-called station blackout. Firefighting trucks and materials for radiation protection and the infrastructure at the NPP site were destroyed. The release of radioactivity induced a severe contamination of the reactor site.

Benchmarking severe accident computer codes for heavy water reactor applications

Energy Technology Data Exchange (ETDEWEB)

Choi, J.H. [International Atomic Energy Agency, Vienna (Austria)

2010-07-01

Consideration of severe accidents at a nuclear power plant (NPP) is an essential component of the defence in depth approach used in nuclear safety. Severe accident analysis involves very complex physical phenomena that occur sequentially during various stages of accident progression. Computer codes are essential tools for understanding how the reactor and its containment might respond under severe accident conditions. International cooperative research programmes are established by the IAEA in areas that are of common interest to a number of Member States. These co-operative efforts are carried out through coordinated research projects (CRPs), typically 3 to 6 years in duration, and often involving experimental activities. Such CRPs allow a sharing of efforts on an international basis, foster team-building and benefit from the experience and expertise of researchers from all participating institutes. The IAEA is organizing a CRP on benchmarking severe accident computer codes for heavy water reactor (HWR) applications. The CRP scope includes defining the severe accident sequence and conducting benchmark analyses for HWRs, evaluating the capabilities of existing computer codes to predict important severe accident phenomena, and suggesting necessary code improvements and/or new experiments to reduce uncertainties. The CRP has been planned on the advice and with the support of the IAEA Nuclear Energy Department's Technical Working Groups on Advanced Technologies for HWRs. (author)

Simulation of severe accident using March-3 computer code

International Nuclear Information System (INIS)

Fernandes, A.; Nakata, H.

1991-01-01

The severe accident sensitivity analysis utilizing the March-3 approximate modelization options has been performed. The reference results against which the present results have been compared were obtained from the best published results for the most representative accident sequences: TMLU, S sub(2)DC sub(r) and S sub(2)DCF sub(r) for the Zion-1 reactor. The results of the present sensitivity analysis revealed the presence of very crude modelizations, in the March-3 program, to represent the critical phenomenologies involved in the severe accident sequences considered, even though large uncertainties must still be taken into account due primarily to the scarcity of the integral benchmark data. (author)

Analysis of media coverage and KINS communication activities on Fukushima accident

International Nuclear Information System (INIS)

Lee, Ki Hyung; Hwang, Sun Chul; Yun, Yuen Wha; Lee, Gye Hwi; Jeong, Jin A; Song, Hye Rim; Yang, Cho Hee

2012-01-01

The people and mass media of Korea, the closest country to Japan, showed great interest in Fukushima nuclear power plant accident. The Korean government and KINS (Korea Institute of Nuclear Safety) attempted to provide accurate information to the press through various communication actions. In this study, we conducted an in-depth analysis of the tendencies of the press according to the accident sequence and tracked the diffusion of this issue. The purpose of this study is to determine the properties of the crisis and essence of the issue. We also carry out a general evaluation and draw implications through an analysis of the communication actions of KINS

Accidents and undetermined deaths: re-evaluation of nationwide samples from the Scandinavian countries.

Science.gov (United States)

Tøllefsen, Ingvild Maria; Thiblin, Ingemar; Helweg-Larsen, Karin; Hem, Erlend; Kastrup, Marianne; Nyberg, Ullakarin; Rogde, Sidsel; Zahl, Per-Henrik; Østevold, Gunvor; Ekeberg, Øivind

2016-05-27

National mortality statistics should be comparable between countries that use the World Health Organization's International Classification of Diseases. Distinguishing between manners of death, especially suicides and accidents, is a challenge. Knowledge about accidents is important in prevention of both accidents and suicides. The aim of the present study was to assess the reliability of classifying deaths as accidents and undetermined manner of deaths in the three Scandinavian countries and to compare cross-national differences. The cause of death registers in Norway, Sweden and Denmark provided data from 2008 for samples of 600 deaths from each country, of which 200 were registered as suicides, 200 as accidents or undetermined manner of deaths and 200 as natural deaths. The information given to the eight experts was identical to the information used by the Cause of Death Register. This included death certificates, and if available external post-mortem examinations, forensic autopsy reports and police reports. In total, 69 % (Sweden and Norway) and 78 % (Denmark) of deaths registered in the official mortality statistics as accidents were confirmed by the experts. In the majority of the cases where disagreement was seen, the experts reclassified accidents to undetermined manner of death, in 26, 25 and 19 % of cases, respectively. Few cases were reclassified as suicides or natural deaths. Among the extracted accidents, the experts agreed least with the official mortality statistics concerning drowning and poisoning accidents. They also reported most uncertainty in these categories of accidents. In a second re-evaluation, where more information was made available, the Norwegian psychiatrist and forensic pathologist increased their agreement with the official mortality statistics from 76 to 87 %, and from 85 to 88 %, respectively, regarding the Norwegian and Swedish datasets. Among the extracted undetermined deaths in the Swedish dataset, the two experts

Quantitative risk trends deriving from PSA-based event analyses. Analysis of results from U.S.NRC's accident sequence precursor program

International Nuclear Information System (INIS)

Watanabe, Norio

2004-01-01

The United States Nuclear Regulatory Commission (U.S.NRC) has been carrying out the Accident Sequence Precursor (ASP) Program to identify and categorize precursors to potential severe core damage accident sequences using the probabilistic safety assessment (PSA) technique. The ASP Program has identified a lot of risk significant events as precursors that occurred at U.S. nuclear power plants. Although the results from the ASP Program include valuable information that could be useful for obtaining and characterizing risk significant insights and for monitoring risk trends in nuclear power industry, there are only a few attempts to determine and develop the trends using the ASP results. The present study examines and discusses quantitative risk trends for the industry level, using two indicators, that is, the occurrence frequency of precursors and the annual core damage probability, deriving from the results of the ASP analysis. It is shown that the core damage risk at U.S. nuclear power plants has been lowered and the likelihood of risk significant events has been remarkably decreasing. As well, the present study demonstrates that two risk indicators used here can provide quantitative information useful for examining and monitoring the risk trends and/or risk characteristics in nuclear power industry. (author)

Regulatory analyses for severe accident issues: an example

International Nuclear Information System (INIS)

Burke, R.P.; Strip, D.R.; Aldrich, D.C.

1984-09-01

This report presents the results of an effort to develop a regulatory analysis methodology and presentation format to provide information for regulatory decision-making related to severe accident issues. Insights and conclusions gained from an example analysis are presented. The example analysis draws upon information generated in several previous and current NRC research programs (the Severe Accident Risk Reduction Program (SARRP), Accident Sequence Evaluation Program (ASEP), Value-Impact Handbook, Economic Risk Analyses, and studies of Vented Containment Systems and Alternative Decay Heat Removal Systems) to perform preliminary value-impact analyses on the installation of either a vented containment system or an alternative decay heat removal system at the Peach Bottom No. 2 plant. The results presented in this report are first-cut estimates, and are presented only for illustrative purposes in the context of this document. This study should serve to focus discussion on issues relating to the type of information, the appropriate level of detail, and the presentation format which would make a regulatory analysis most useful in the decisionmaking process

Nuclear accidents

International Nuclear Information System (INIS)

1987-01-01

On 27 May 1986 the Norwegian government appointed an inter-ministerial committee of senior officials to prepare a report on experiences in connection with the Chernobyl accident. The present second part of the committee's report describes proposals for measures to prevent and deal with similar accidents in the future. The committee's evaluations and proposals are grouped into four main sections: Safety and risk at nuclear power plants; the Norwegian contingency organization for dealing with nuclear accidents; compensation issues; and international cooperation

Analysis of two different types of hydrogen combustion during severe accidents in a typical pressurized water reactor

International Nuclear Information System (INIS)

Ko Yuchih; Lee Min

2005-01-01

Hydrogen combustion is an important phenomenon that may occur during severe accidents of Nuclear Power Plants (NPPs). Depending on the specific plant design, the initiating events, and mitigation actions executed, hydrogen combustion may have distinct characteristics and may damage the plant in various degrees. The worst scenario will be the catastrophic failure of containment. In this study two specific types of hydrogen combustion are analyzed to evaluate their impact on the containment integrity. In this paper, Station Blackout (SBO) and Loss of Coolant Accidents (LOCAs) sequences are analyzed using MAAP4 (Modular Accident Analysis Program) code. The former sequence is used to represent hydrogen combustion phenomenon under the condition that the reactor pressure vessel (RPV) breaches at high pressure and the latter sequence represents the phenomenon that RPV fails at low pressure. Two types of hydrogen combustion are observed in the simulation. The Type I hydrogen combustion represents global and instantaneous hydrogen combustion. Large pressure spike is created during the combustion and represents a threat to containment integrity. Type II hydrogen combustion is localized burn and burn continuously over a time period. There is hardly any impact of this type hydrogen burn on the containment pressurization rate. Both types of hydrogen combustion can occur in the severe accidents without any human intervention. From the accident mitigation point of view, operators should try to bring the containment into conditions that favor the Type II hydrogen combustion. (authors)

Approaches to accident analysis in recent US Department of Energy environmental impact statements

International Nuclear Information System (INIS)

Mueller, C.; Folga, S.; Nabelssi, B.

1996-01-01

A review of accident analyses in recent US Department of Energy (DOE) Environmental Impact Statements (EISs) was conducted to evaluate the consistency among approaches and to compare these approaches with existing DOE guidance. The review considered several components of an accident analysis: the overall scope, which in turn should reflect the scope of the EIS; the spectrum of accidents considered; the methods and assumptions used to determine frequencies or frequency ranges for the accident sequences; and the assumption and technical bases for developing radiological and chemical atmospheric source terms and for calculating the consequences of airborne releases. The review also considered the range of results generated with respect to impacts on various worker and general populations. In this paper, the findings of these reviews are presented and methods recommended for improving consistency among EISs and bringing them more into line with existing DOE guidance

Accident hazard evaluation and control decisions on forested recreation sites

Science.gov (United States)

Lee A. Paine

1971-01-01

Accident hazard associated with trees on recreation sites is inherently concerned with probabilities. The major factors include the probabilities of mechanical failure and of target impact if failure occurs, the damage potential of the failure, and the target value. Hazard may be evaluated as the product of these factors; i.e., expected loss during the current...

Uranium storage bed accident hazards evaluation

International Nuclear Information System (INIS)

Longhurst, G.R.; Shmayda, W.T.

1989-01-01

To properly assess hazards and risks associated with the use of uranium beds as tritium storage devices in fusion reactor systems, it is necessary to understand the consequences occurring in the event of an accident. Accidents involving uranium beds are postulated, and the possible results are considered. A research program to more fully and accurately understand those results has been initiated involving the Idaho National Engineering Laboratory and Ontario Hydro. The plan and objectives of that program are presented. 11 refs., 1 tab

Uranium storage bed accident hazards evaluation

International Nuclear Information System (INIS)

Longhurst, G.R.; Shmayda, W.T.

1989-10-01

To properly assess hazards and risks associated with the use of uranium beds as tritium storage devices in fusion reactor systems, it is necessary to understand the consequences occurring in the event of an accident. Accidents involving uranium beds are postulated, and the possible results are considered. A research program to more fully and accurately understand those results has been initiated involving the Idaho National Engineering Laboratory and Ontario Hydro. The plan and objectives of that program are presented. 11 refs., 1 tab

Computerized accident management support system: development for severe accident management

International Nuclear Information System (INIS)

Garcia, V.; Saiz, J.; Gomez, C.

1998-01-01

The activities involved in the international Halden Reactor Project (HRP), sponsored by the OECD, include the development of a Computerized Accident Management Support System (CAMS). The system was initially designed for its operation under normal conditions, operational transients and non severe accidents. Its purpose is to detect the plant status, analyzing the future evolution of the sequence (initially using the APROS simulation code) and the possible recovery and mitigation actions in case of an accident occurs. In order to widen the scope of CAMS to severe accident management issues, the integration of the MAAP code in the system has been proposed, as the contribution of the Spanish Electrical Sector to the project (with the coordination of DTN). To include this new capacity in CAMS is necessary to modify the system structure, including two new modules (Diagnosis and Adjustment). These modules are being developed currently for Pressurized Water Reactors and Boiling Water REactors, by the engineering of UNION FENOSA and IBERDROLA companies (respectively). This motion presents the characteristics of the new structure of the CAMS, as well as the general characteristics of the modules, developed by these companies in the framework of the Halden Reactor Project. (Author)

The significance of domino effect in chemical accidents

OpenAIRE

Hemmatian, Behrouz; Abdolhamidzadeh, B; Darbra Roman, Rosa Maria; Casal Fàbrega, Joaquim

2014-01-01

A historical survey was performed on 330 accidents involving domino effect, occurred in process/storage plants and in the transportation of hazardous materials; only accidents occurred after 1st-January-1961 have been considered. The main features – geographical location, type of accident, materials involved, origin and causes, consequences, domino sequences – were analyzed, with special consideration to the situation in the developing countries and compared to those from other previous surve...

Analysis of the LaSalle Unit 2 Nuclear Power Plant: Risk Methods Integration and Evaluation Program (RMIEP)

International Nuclear Information System (INIS)

Payne, A.C. Jr.; Eide, S.A.; LaChance, J.C.; Whitehead, D.W.

1992-10-01

This volume presents the results of the initiating event and accident sequence delineation analyses of the LaSalle Unit II nuclear power plant performed as part of the Level III PRA being performed by Sandia National Laboratories for the Nuclear Regulatory Commission. The initiating event identification included a thorough review of extant data and a detailed plant specific search for special initiators. For the LaSalle analysis, the following initiating events were defined: eight general transients, ten special initiators, four LOCAs inside containment, one LOCA outside containment, and two interfacing LOCAs. Three accident sequence event trees were constructed: LOCA, transient, and ATWS. These trees were general in nature so that a tree represented all initiators of a particular type (i.e., the LOCA tree was constructed for evaluating small, medium, and large LOCAs simultaneously). The effects of the specific initiators on the systems and the different success criteria were handled by including the initiating events directly in the system fault trees. The accident sequence event trees were extended to include the evaluation of containment vulnerable sequences. These internal event accident sequence event trees were also used for the evaluation of the seismic, fire, and flood analyses

Supplemental analysis of accident sequences and source terms for waste treatment and storage operations and related facilities for the US Department of Energy waste management programmatic environmental impact statement

International Nuclear Information System (INIS)

Folga, S.; Mueller, C.; Nabelssi, B.; Kohout, E.; Mishima, J.

1996-12-01

This report presents supplemental information for the document Analysis of Accident Sequences and Source Terms at Waste Treatment, Storage, and Disposal Facilities for Waste Generated by US Department of Energy Waste Management Operations. Additional technical support information is supplied concerning treatment of transuranic waste by incineration and considering the Alternative Organic Treatment option for low-level mixed waste. The latest respirable airborne release fraction values published by the US Department of Energy for use in accident analysis have been used and are included as Appendix D, where respirable airborne release fraction is defined as the fraction of material exposed to accident stresses that could become airborne as a result of the accident. A set of dominant waste treatment processes and accident scenarios was selected for a screening-process analysis. A subset of results (release source terms) from this analysis is presented

Database on aircraft accidents

International Nuclear Information System (INIS)

Nishio, Masahide; Koriyama, Tamio

2013-11-01

The Reactor Safety Subcommittee in the Nuclear Safety and Preservation Committee published 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' as the standard method for evaluating probability of aircraft crash into nuclear reactor facilities in July 2002. In response to this issue, Japan Nuclear Energy Safety Organization has been collecting open information on aircraft accidents of commercial airplanes, self-defense force (SDF) airplanes and US force airplanes every year since 2003, sorting out them and developing the database of aircraft accidents for the latest 20 years to evaluate probability of aircraft crash into nuclear reactor facilities. In this report the database was revised by adding aircraft accidents in 2011 to the existing database and deleting aircraft accidents in 1991 from it, resulting in development of the revised 2012 database for the latest 20 years from 1992 to 2011. Furthermore, the flight information on commercial aircrafts was also collected to develop the flight database for the latest 20 years from 1992 to 2011 to evaluate probability of aircraft crash into reactor facilities. The method for developing the database of aircraft accidents to evaluate probability of aircraft crash into reactor facilities is based on the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' described above. The 2012 revised database for the latest 20 years from 1992 to 2011 shows the followings. The trend of the 2012 database changes little as compared to the last year's report. (1) The data of commercial aircraft accidents is based on 'Aircraft accident investigation reports of Japan transport safety board' of Ministry of Land, Infrastructure, Transport and Tourism. The number of commercial aircraft accidents is 4 for large fixed-wing aircraft, 58 for small fixed-wing aircraft, 5 for large bladed aircraft and 99 for small bladed aircraft. The relevant accidents

Evaluation of Coolant Injection Procedure in the Severe Accident Management Strategy of APR1400

International Nuclear Information System (INIS)

Cho, Yongjin; Lim, Kukhee; Song, Sungchu; Lee, Sukho; Hwang, Taesuk

2013-01-01

A coolant injection strategy in the severe accident management guideline (SAMG) of APR1400 relates to immediate coolant injection into RCS (Reactor Coolant System) or injection following the recovery of secondary coolant inventory. This strategy could play important role in accident mitigation and radiological consequences. In this study, appropriateness of the strategy was evaluated using MELCOR1.8.6 and several sensitivity studies of the key parameters were performed. Analysis for APR1400 using MELCOR 1.8.6 was performed to evaluate the effectiveness of accident management strategies and the following conclusions were identified. Sequential operation of secondary and RCS injection may not be the best strategy and the simultaneous injection of secondary and RCS injection could be more preferable. At least, the RCS injection should start before complete drainage of water in the safety injection tank using mobile pumps. In this study, the effectiveness of timing of operator action has been examined and the amount of injection flowrate needs to be studied in the future

Severe Accidents: French Regulatory Practice for Nuclear Power Plants

International Nuclear Information System (INIS)

Colin, M.

1997-01-01

In the framework of a continuous and iterative process, the French Safety Authority asks the utility EDF to implement equipment and procedure modifications on the operating reactors, in order to cope with the most likely Severe Accident sequences. As a result of Probabilistic Safety Assessments published in 1990, important equipment and procedure modifications are being implemented on the French PWRs to improve the safety in shutdown states. The implementation of another set of modifications against some reactivity accident sequences is also in progress. More recently, the Safety Authority expressed specific Severe Accident requirements in terms of instrumentation, equipment qualification, high pressure core melt accidents and hydrogen risk prevention. In that respect, EDF was asked to implement hydrogen recombiners on its reactors. On the other hand, the French Safety authority is involved with its German counterpart in the assessment process of the European Pressurized Water Reactor Project. In consistency with the common recommendations of the Safety Authorities involved, Severe Accident provisions for this reactor are being taken into account at the design stage

Evaluation of dose attenuation factor of armored car against radiation accidents

International Nuclear Information System (INIS)

Sato, Tatsuhiko; Fujii, Katsutoshi; Murayama, Takashi

2002-03-01

The Tokyo Fire Department developed an armored car against radiation accidents. The car is covered by lead shields for attenuating dose from gamma rays. Dose from neutrons also can be attenuated by pouring water into tanks attached to the surface of the car. However, dose attenuation factors of the radiation shields had been determined by an estimation of single-layer shield, and more precise evaluation of multi-layer shield was required. By request from the Tokyo Fire Department, a precise evaluation of the dose attenuation in multi-layer shield was carried out. The evaluation was made by a Monte Carlo radiation transport simulation code MCNP4B for the shields used in the front, side and back of the car. Three types of the radiation sources ( 252 Cf as a neutron source, 60 Co as a gamma ray source, and radiation source corresponding to the JCO criticality accident) were considered in the calculation. Benchmark experiments using neutron and gamma ray sources were also performed for ensuring the evaluation method. As a result, it was found out that doses of neutron and gamma ray were attenuated to approximately 10% and 25% by the thickest shield, respectively. These values were close to the ones which had already obtained by the estimation of single-layer shield. (author)

Internal event analysis for Laguna Verde Unit 1 Nuclear Power Plant. Accident sequence quantification and results; Analisis de eventos internos para la Unidad 1 de la Central Nucleoelectrica de Laguna Verde. Cuantificacion de secuencias de accidente y resultados

Energy Technology Data Exchange (ETDEWEB)

Huerta B, A; Aguilar T, O; Nunez C, A; Lopez M, R [Comision Nacional de Seguridad Nuclear y Salvaguardias, 03000 Mexico D.F. (Mexico)

1994-07-01

The Level 1 results of Laguna Verde Nuclear Power Plant PRA are presented in the {sup I}nternal Event Analysis for Laguna Verde Unit 1 Nuclear Power Plant, CNSNS-TR 004, in five volumes. The reports are organized as follows: CNSNS-TR 004 Volume 1: Introduction and Methodology. CNSNS-TR4 Volume 2: Initiating Event and Accident Sequences. CNSNS-TR 004 Volume 3: System Analysis. CNSNS-TR 004 Volume 4: Accident Sequence Quantification and Results. CNSNS-TR 005 Volume 5: Appendices A, B and C. This volume presents the development of the dependent failure analysis, the treatment of the support system dependencies, the identification of the shared-components dependencies, and the treatment of the common cause failure. It is also presented the identification of the main human actions considered along with the possible recovery actions included. The development of the data base and the assumptions and limitations in the data base are also described in this volume. The accident sequences quantification process and the resolution of the core vulnerable sequences are presented. In this volume, the source and treatment of uncertainties associated with failure rates, component unavailabilities, initiating event frequencies, and human error probabilities are also presented. Finally, the main results and conclusions for the Internal Event Analysis for Laguna Verde Nuclear Power Plant are presented. The total core damage frequency calculated is 9.03x 10-5 per year for internal events. The most dominant accident sequences found are the transients involving the loss of offsite power, the station blackout accidents, and the anticipated transients without SCRAM (ATWS). (Author)

Restructuring of an Event Tree for a Loss of Coolant Accident in a PSA model

International Nuclear Information System (INIS)

Lim, Ho-Gon; Han, Sang-Hoon; Park, Jin-Hee; Jang, Seong-Chul

2015-01-01

Conventional risk model using PSA (probabilistic Safety Assessment) for a NPP considers two types of accident initiators for internal events, LOCA (Loss of Coolant Accident) and transient event such as Loss of electric power, Loss of cooling, and so on. Traditionally, a LOCA is divided into three initiating event (IE) categories depending on the break size, small, medium, and large LOCA. In each IE group, safety functions or systems modeled in the accident sequences are considered to be applicable regardless of the break size. However, since the safety system or functions are not designed based on a break size, there exist lots of mismatch between safety system/function and an IE, which may make the risk model conservative or in some case optimistic. Present paper proposes new methodology for accident sequence analysis for LOCA. We suggest an integrated single ET construction for LOCA by incorporating a safety system/function and its applicable break spectrum into the ET. Integrated accident sequence analysis in terms of ET for LOCA was proposed in the present paper. Safety function/system can be properly assigned if its applicable range is given by break set point. Also, using simple Boolean algebra with the subset of the break spectrum, final accident sequences are expressed properly in terms of the Boolean multiplication, the occurrence frequency and the success/failure of safety system. The accident sequence results show that the accident sequence is described more detailed compared with the conventional results. Unfortunately, the quantitative results in terms of MCS (minimal Cut-Set) was not given because system fault tree was not constructed for this analysis and the break set points for all 7 point were not given as a specified numerical quantity. Further study may be needed to fix the break set point and to develop system fault tree

Restructuring of an Event Tree for a Loss of Coolant Accident in a PSA model

Energy Technology Data Exchange (ETDEWEB)

Lim, Ho-Gon; Han, Sang-Hoon; Park, Jin-Hee; Jang, Seong-Chul [KAERI, Daejeon (Korea, Republic of)

2015-05-15

Conventional risk model using PSA (probabilistic Safety Assessment) for a NPP considers two types of accident initiators for internal events, LOCA (Loss of Coolant Accident) and transient event such as Loss of electric power, Loss of cooling, and so on. Traditionally, a LOCA is divided into three initiating event (IE) categories depending on the break size, small, medium, and large LOCA. In each IE group, safety functions or systems modeled in the accident sequences are considered to be applicable regardless of the break size. However, since the safety system or functions are not designed based on a break size, there exist lots of mismatch between safety system/function and an IE, which may make the risk model conservative or in some case optimistic. Present paper proposes new methodology for accident sequence analysis for LOCA. We suggest an integrated single ET construction for LOCA by incorporating a safety system/function and its applicable break spectrum into the ET. Integrated accident sequence analysis in terms of ET for LOCA was proposed in the present paper. Safety function/system can be properly assigned if its applicable range is given by break set point. Also, using simple Boolean algebra with the subset of the break spectrum, final accident sequences are expressed properly in terms of the Boolean multiplication, the occurrence frequency and the success/failure of safety system. The accident sequence results show that the accident sequence is described more detailed compared with the conventional results. Unfortunately, the quantitative results in terms of MCS (minimal Cut-Set) was not given because system fault tree was not constructed for this analysis and the break set points for all 7 point were not given as a specified numerical quantity. Further study may be needed to fix the break set point and to develop system fault tree.

Airborne concentrations of radioactive materials in severe accidents

International Nuclear Information System (INIS)

Ross, D.F. Jr.; Denning, R.S.

1989-01-01

Radioactive materials would be released to the containment building of a commercial nuclear reactor during each of the stages of a severe accident. Results of analyses of two accident sequences are used to illustrate the magnitudes of these sources of radioactive materials, the resulting airborne mass concentrations, the characteristics of the airborne aerosols, the potential for vapor forms of radioactive materials, the effectiveness of engineered safety features in reducing airborne concentrations, and the release of radioactive materials to the environment. Ability to predict transport and deposition of radioactive materials is important to assessing the performance of containment safety features in severe accidents and in the development of accident management procedures to reduce the consequences of severe accidents

Contribution to evaluating nuclear power plant accidents

International Nuclear Information System (INIS)

Razga, J.; Horacek, P.

1990-01-01

Large-scale accidents pose the highest risk in the use of nuclear power. They are the major factor that has to be taken into account when assessing the effect of nuclear power plants on human health and on the environment. In Czechoslovak conditions, the effectiveness of provisions made to reduce the hazard of large-scale nuclear power plant accidents must be considered from the following aspects: effect on human health, consequences of long-term disabling of the infrastructure, potential of human and material reserves in coping with the accident, consequences of power failure for the electricity system, effect on agricultural production and catering, risk of ground and surface water contamination in the Labe or Danube river basin, and international political aspects. (Z.M.). 3 tabs., 18 refs

Sequence Matters but How Exactly? A Method for Evaluating Activity Sequences from Data

Science.gov (United States)

Doroudi, Shayan; Holstein, Kenneth; Aleven, Vincent; Brunskill, Emma

2016-01-01

How should a wide variety of educational activities be sequenced to maximize student learning? Although some experimental studies have addressed this question, educational data mining methods may be able to evaluate a wider range of possibilities and better handle many simultaneous sequencing constraints. We introduce Sequencing Constraint…

An estimation of the accident sequence of the LOCA groups for the PSA model of the KSNP

International Nuclear Information System (INIS)

Han, Seok Jung; Yang, Joon Eon

2004-01-01

A new trend of the probabilistic safety assessment (PSA) technology is to improve and enhance the current PSA model to be adequate for risk-informed applications (RIA). Requirements of a PSA model for the RIA are summarized as (1) reduction of the conservatism in the model utilizing all available information and (2) consideration of the specific features of a plant as designed, as operated. This is because the PSA based on conservatism and insufficient consideration of the plant-specific features resulted in a shadow effect on the assessment results. When a PSA model is used in a risk-informed application, more precise risk-information is more helpful to decision making process, so the reduction of the conservatism and the consideration of the plant-specific features in a PSA model are the most essential elements. Recently, an effort has been performed to modify the current PSA model for the Korea Standard Nuclear Power plant (KSNP) to be used in risk-informed applications. A re-estimation of the accident sequence of the loss of coolant accident (LOCA) groups for the PSA model of the KSNP has been performed

Methodology for the Assessment of Confidence in Safety Margin for Small Break Loss of Coolant Accident Sequences

Energy Technology Data Exchange (ETDEWEB)

Nagrale, D. B.; Prasad, M.; Rao, R. S.; Gaikwad, A.J., E-mail: avinashg@aerb.gov.in [Nuclear Safety Analysis Division, Atomic Energy Regulatory Board, Mumbai (India)

2014-10-15

Deterministic Safety Analysis and Probabilistic Safety Assessment (PSA) analyses are used concurrently to assess the Nuclear Power Plant (NPP) safety. The conventional deterministic analysis is conservative. The best estimate plus uncertainty analysis is increasingly being used for deterministic calculation in NPPs. The PSA methodology aims to be as realistic as possible while integrating information about accident phenomena, plant design, operating practices, component reliability and human behaviour. The peak clad temperature (PCT) distribution provides an insight into the confidence in safety margin for an initiating event. The paper deals with the concept of calculating the peak clad temperature with 95 percent confidence and 95 percent probability (PCT{sub 95/95}) in small break loss of coolant accident (SBLOCA) and methodologies for assessing safety margin. Five input parameters mainly, nominal power level, decay power, fuel clad gap conductivity, fuel thermal conductivity and discharge coefficient, were selected. A Uniform probability density function was assigned to the uncertain parameters and these uncertainties are propagated using Latin Hypercube Sampling (LHS) technique. The sampled data for 5 parameters were randomly mixed by LHS to obtain 25 input sets. A non-core damage accident sequence was selected from the SBLOCA event tree of a typical VVER study to estimate the PCTs and safety margin. A Kolmogorov– Smirnov goodness-of-fit test was carried out for PCTs. The smallest value of safety margin would indicate the robustness of the system with 95% confidence and 95% probability. Regression analysis was also carried out using 1000 sample size for the estimating PCTs. Mean, variance and finally safety margin were analysed. (author)

Evaluation of the 17 June 1997 Criticality Accident at Arzamas-16

International Nuclear Information System (INIS)

Morris Klein

1999-01-01

On June 17, 1997, a critically accident occurred at Arzamas-16, which resulted in the death (within three days) of A. N. Zakharov, a Russian scientist with 20 years' experience conducting multiassembly experiments. In this case, the multiplying assembly was a fast metal system consisting of a 235 U (90% enriched) core and a copper reflector. According to the Russian press, ''Zakharov misjudged the degree of criticality of the breeding system and committed several gross violations of regulations.'' As we see it, there were three major causes of this accident. First, the experiment was flawed by Zakharov's misreading of the appropriate size of the assembly, which he took from a notebook that described the old experiment he was attempting to repeat. Second, he disregarded the appropriate procedures and safety regulations. Third, these two mistakes were compounded by an improperly set audible alarm system and Zakharov's unsafe use of the table. We also discuss our reconstruction of the accident based on information given by the Russians to US scientists and information culled from Russian newspaper and magazine articles. We also describe our thoughts on the behavior of the assembly following the accident and the radiation dose level Zakharov may have received. These levels match values we have lately obtained from translations of Russian news articles. This accident clearly points out the penalty for weak administrative control of work with multiplying systems. Criticality experimentation requires formality of operation. The experimenter, his peers, and a trained safety person need to document that they understand the experiment and how it will be conducted. Knowing that the experiment was successfully run several decades ago does not justify bypassing a safety evaluation

A methodology for the evaluation of fuel rod failures under transportation accidents

International Nuclear Information System (INIS)

Rashid, J.Y.R.; Machiels, A.J.

2004-01-01

Recent studies on long-term behavior of high-burnup spent fuel have shown that under normal conditions of stor-age, challenges to cladding integrity from various postulated damage mechanisms, such as delayed hydride crack-ing, stress-corrosion cracking and long-term creep, would not lead to any significant safety concerns during dry storage, and regulatory rules have subsequently been established to ensure that a compatible level of safety is maintained. However, similar safety assurances for spent fuel transportation have not yet been developed, and further studies are currently being conducted to evaluate the conditions under which transportation-related safety issues can be resolved. One of the issues presently under evaluation is the ability and the extent of the fuel as-semblies to maintain non-reconfigured geometry during transportation accidents. This evaluation may determine whether, or not, the shielding, confinement, and criticality safety evaluations can be performed assuming initial fuel assembly geometries. The degree to which spent fuel re-configuration could occur during a transportation accident would depend to a large degree on the number of fuel rod failures and the type and geometry of the failure modes. Such information can only be developed analytically, as there is no direct experimental data that can provide guidance on the level of damage that can be expected. To this end, the paper focuses on the development of a modeling and analysis methodology that deals with this general problem on a generic basis. First consideration is given to defining acci-dent loading that is equivalent to the bounding, although analytically intractable, hypothetical transportation acci-dent of a 9-meter drop onto essentially unyielding surface, which is effectively a condition for impact-limiters de-sign. Second, an analytically robust material constitutive model, an essential element in a successful structural analysis, is required. A material behavior model

The 1986 Chernobyl accident; Der Unfall von Tschernobyl 1986

Energy Technology Data Exchange (ETDEWEB)

Kerner, Alexander; Stueck, Reinhard; Weiss, Frank-Peter [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, Garching bei Muenchen, Koeln (Germany). Bereich Reaktorsicherheitsanalysen; Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, Koeln (Germany)

2011-02-15

April 26, 2011 marks the 25th anniversary of the Chernobyl reactor accident, the worst incident in the history of the peaceful utilization of nuclear power. While investigations of the course of events and the causes of the accident largely present a uniform picture, descriptions still vary widely when it comes to the impact on the population and the environment. This treatment of the Chernobyl accident constitutes a summary of facts about the initiation of the accident and the sequence of events that followed. In addition, measures are described which were taken to exclude any repetition of a disaster of this kind. The health consequences and the socio-economic impact of the accident are not discussed in any detail. The first section contains an introduction and an overview of the Soviet RBMK (Chernobyl) reactor line. In section 2, fundamental characteristics of this special type of reactor, which was exclusively built in the former Soviet Union, are discussed. This information is necessary to understand the sequence of accident events and provides an answer to the frequent question whether that accident could be transferred to reactors in this country. The third section outlines the history of the accident caused ultimately by a commissioning test never performed before. The section is completed by a brief description of radiological releases and the state of the plant after the accident when entombed in the ''sarcophagus.'' The different causes are then summarized and the modifications afterwards made to RBMK reactors are outlined. (orig.)

Evaluation of selected ex-reactor accidents related to the tritium and medical isotope production mission at the FFTF

Energy Technology Data Exchange (ETDEWEB)

Himes, D.A.

1997-11-17

The Fast Flux Test Facility (FFTF) has been proposed as a production facility for tritium and medical isotopes. A range of postulated accidents related to ex-reactor irradiated fuel and target handling were identified and evaluated using new source terms for the higher fuel enrichment and for the tritium and medical isotope targets. In addition, two in-containment sodium spill accidents were re-evaluated to estimate effects of increased fuel enrichment and the presence of the Rapid Retrieval System. Radiological and toxicological consequences of the analyzed accidents were found to be well within applicable risk guidelines.

Analysis of local subassembly accident in KALIMER

Energy Technology Data Exchange (ETDEWEB)

Kwon, Young Min; Jeong, Kwan Seong; Hahn, Do Hee

2000-10-01

Subassembly Accidents (S-A) in the Liquid Metal Reactor (LMR) may cause extensive clad and fuel melting and are thus regarded as a potential whole core accident initiator. The possibility of S-A occurrence must be very low frequency by the design features, and reactor must have specific instrumentation to interrupt the S-A sequences by causing a reactor shutdown. The evaluation of the relevant initiators, the event sequences which follow them, and their detection are the essence of the safety issue. Particularly, the phenomena of flow blockage caused by foreign materials and/or the debris from the failed fuel pin have been researched world-widely. The foreign strategies for dealing with the S-A and the associated safety issues with experimental and theoretical R and D results are reviewed. This report aims at obtaining information to reasonably evaluate the thermal-hydraulic effect of S-A for a wire-wrapped LMR fuel pin bundle. The mechanism of blockage formation and growth within a pin bundle and at the subassembly entrance is reviewed in the phenomenological aspect. Knowledge about the recent LMR subassembly design and operation procedure to prevent flow blockage will be reflected for KALIMER design later. The blockage analysis method including computer codes and related analytical models are reviewed. Especially SABRE4 code is discussed in detail. Preliminary analyses of flow blockage within a 271-pin driver subassembly have been performed using the SABRE4 computer code. As a result no sodium boiling occurred for the central 24-subchannel blockage as well as 6-subchannel blockage.

A Study on the Operation Strategy for Combined Accident including TLOFW accident

International Nuclear Information System (INIS)

Kim, Bo Gyung; Kang, Gook Young; Yoon, Ho Joon

2014-01-01

It is difficult for operators to recognize the necessity of a feed-and-bleed (F-B) operation when the loss of coolant accident and failure of secondary side occur. An F-B operation directly cools down the reactor coolant system (RCS) using the primary cooling system when residual heat removal by the secondary cooling system is not available. The plant is not always necessary the F-B operation when the secondary side is failed. It is not necessary to initiate an F-B operation in the case of a medium or large break because these cases correspond to low RCS pressure sequences when the secondary side is failed. If the break size is too small to sufficiently decrease the RCS pressure, the F-B operation is necessary. Therefore, in the case of a combined accident including a secondary cooling system failure, the provision of clear information will play a critical role in the operators' decision to initiate an F-B operation. This study focuses on the how we establish the operation strategy for combined accident including the failure of secondary side in consideration of plant and operating conditions. Previous studies have usually focused on accidents involving a TLOFW accident. The plant conditions to make the operators confused seriously are usually the combined accident because the ORP only focuses on a single accident and FRP is less familiar with operators. The relationship between CET and PCT under various plant conditions is important to decide the limitation of initiating the F-B operation to prevent core damage

Re-evaluation of internal exposure from the Chernobyl accident to the Czech population

International Nuclear Information System (INIS)

Malatova, I.; Skrkal, J.

2006-01-01

Doses from internal and external exposure due to the Chernobyl accident to the Czech population were estimated early in 1986. Later on, with more experimental results, doses from internal exposure were calculated more precisely. The initial predictions were rather conservative leading thus to higher doses than it appeared one year later. Monitoring of the environment, food chain and monitoring of internal contamination has been performed on the whole territory of the country since 1986 up to present time and has thus enabled reevaluation of the original estimates and also prediction of doses in future. This paper is focused mainly on evaluation of in vivo measurements of people. Use of the sophisticate software I.M.B.A. Professional Plus led to new estimation of committed effective doses and calculated inhalation intakes of radionuclides lead to estimation of content of radionuclides in the air. Ingestion intakes were also evaluated and compared with estimates from the results of measurements of food chain. Generally, the doses from the Chernobyl accident to the Czech population were low; however, as a few radionuclides have been measurable in environment, food chain and human body (137 Cs up to present), it is a unique chance for studying behaviour of radionuclides in the biosphere. Experience and conclusions which follow from the monitoring of the Chernobyl accident are unique for running and development of monitoring networks. Re evaluation of internal doses to the Czech population from the Chernobyl accident, using alternative approach, gave generally smaller doses than original estimation; still, the difference was not significant. It was shown that the doses from inhalation of 131 I and 137 Cs were greater than originally estimated, whereas doses from ingestion intake were lower than the originally estimated ones. (authors)

Thermalydraulic processes in the reactor coolant system of a BWR under severe accident conditions

International Nuclear Information System (INIS)

Hodge, S.A.

1990-01-01

Boiling water reactors (BWRs) incorporate many unique structural features that make their expected response under severe accident conditions very different from that predicted in the case of pressurized water reactor accident sequences. Automatic main steam isolation valve (MIV) closure as the vessel water level approaches the top of the core would cause reactor vessel isolation while automatic recirculation pump trip would limit the in-vessel flows to those characteristic of natural circulation (as disturbed by vessel relief valve actuation). This paper provides a discussion of the BWR control blade, channel box, core plate, control rod guide tube, and reactor vessel safety relief valve (SRV) configuration and the effects of these structural components upon thermal hydraulic processes within the reactor vessel under severe accident conditions. The dominant BWR severe accident sequences as determined by probabilistic risk assessment are described and the expected timing of events for the unmitigated short-term station blackout severe accident sequence at the Peach Bottom atomic power station is presented

Research on consequence analysis method for probabilistic safety assessment of nuclear fuel facilities (5). Evaluation method and trial evaluation of criticality accident

International Nuclear Information System (INIS)

Yamane, Yuichi; Abe, Hitoshi; Nakajima, Ken; Hayashi, Yoshiaki; Arisawa, Jun; Hayami, Satoru

2010-01-01

A special committee of 'Research on the analysis methods for accident consequence of nuclear fuel facilities (NFFs)' was organized by the Atomic Energy Society of Japan (AESJ) under the entrustment of Japan Atomic Energy Agency (JAEA). The committee aims to research on the state-of-the-art consequence analysis method for the Probabilistic Safety Assessment (PSA) of NFFs, such as fuel reprocessing and fuel fabrication facilities. The objectives of this research are to obtain information useful for establishing quantitative performance objectives and to demonstrate risk-informed regulation through qualifying issues needed to be resolved for applying PSA to NFFs. The research activities of the committee were mainly focused on the consequence analysis method for postulated accidents with potentially large consequences in NFFs, e.g., events of criticality, spill of molten glass, hydrogen explosion, boiling of radioactive solution and fire (including the rapid decomposition of TBP complexes), resulting in the release of radioactive materials to the environment. The results of the research were summarized in a series of six reports, which consist of a review report and five technical ones. In this report, the evaluation methods of criticality accident, such as simplified methods, one-point reactor kinetics codes and quasi-static method, were investigated and their features were summarized to provide information useful for the safety evaluation of NFFs. In addition, several trial evaluations were performed for a hypothetical scenario of criticality accident using the investigated methods, and their results were compared. The release fraction of volatile fission products in a criticality accident was also investigated. (author)

Core loss during a severe accident (COLOSS)

International Nuclear Information System (INIS)

Adroguer, B.; Bertrand, F.; Chatelard, P.; Cocuaud, N.; Van Dorsselaere, J.P.; Bellenfant, L.; Knocke, D.; Bottomley, D.; Vrtilkova, V.; Belovsky, L.; Mueller, K.; Hering, W.; Homann, C.; Krauss, W.; Miassoedov, A.; Schanz, G.; Steinbrueck, M.; Stuckert, J.; Hozer, Z.; Bandini, G.; Birchley, J.; Berlepsch, T. von; Kleinhietpass, I.; Buck, M.; Benitez, J.A.F.; Virtanen, E.; Marguet, S.; Azarian, G.; Caillaux, A.; Plank, H.; Boldyrev, A.; Veshchunov, M.; Kobzar, V.; Zvonarev, Y.; Goryachev, A.

2005-01-01

The COLOSS project was a 3-year shared-cost action, which started in February 2000. The work-programme performed by 19 partners was shaped around complementary activities aimed at improving severe accident codes. Unresolved risk-relevant issues regarding H 2 production, melt generation and the source term were studied through a large number of experiments such as (a) dissolution of fresh and high burn-up UO 2 and MOX by molten Zircaloy (b) simultaneous dissolution of UO 2 and ZrO 2 (c) oxidation of U-O-Zr mixtures (d) degradation-oxidation of B 4 C control rods. Corresponding models were developed and implemented in severe accident computer codes. Upgraded codes were then used to apply results in plant calculations and evaluate their consequences on key severe accident sequences in different plants involving B 4 C control rods and in the TMI-2 accident. Significant results have been produced from separate-effects, semi-global and large-scale tests on COLOSS topics enabling the development and validation of models and the improvement of some severe accident codes. Breakthroughs were achieved on some issues for which more data are needed for consolidation of the modelling in particular on burn-up effects on UO 2 and MOX dissolution and oxidation of U-O-Zr and B 4 C-metal mixtures. There was experimental evidence that the oxidation of these mixtures can contribute significantly to the large H 2 production observed during the reflooding of degraded cores under severe accident conditions. The plant calculation activity enabled (a) the assessment of codes to calculate core degradation with the identification of main uncertainties and needs for short-term developments and (b) the identification of safety implications of new results. Main results and recommendations for future R and D activities are summarized in this paper

Evaluation of Traffic Accident Risk in In-City Bus Drivers: The Use of Berlin Questionnaire

Science.gov (United States)

Ekren, Pervin Korkmaz; Uysal, Funda Elmas; Başoğlu, Özen K.

2018-01-01

OBJECTIVES Traffic accidents associated with high mortality rate may produce serious problems especially in highways. Obstructive sleep apnea (OSA) has been associated with a high risk for traffic accidents due to excessive daytime sleepiness even in in-city drivers. In the present study, it was aimed to evaluate the rate of OSA symptoms and to identify risk factors associated with traffic accidents in in-city bus drivers. MATERIAL AND METHODS A self-administered questionnaire including demographic and anthropometric features, sleep and work schedules, Berlin questionnaire, Epworth sleepiness score (ESS), and history of traffic accidents was used. RESULTS The questionnaire was conducted for 1400 male bus drivers (mean age, 38.0±6.4 y, body mass index, 27.8±3.9 kg/m2). A total of 1058 (75.6%) drivers had one or more accidents while driving bus. According to the Berlin questionnaire, 176 (12.6%) drivers were found to have high OSA risk and the accident rate was 83.0% in high-risk group, whereas 74.5% of low-risk drivers had accidents (p=0.043). The drivers with a history of traffic accident were older (p=0.030), had higher ESS (p=0.019), and were more in the high-risk OSA group according to the Berlin questionnaire (p=0.015). In multivariate linear regression analysis, traffic accident was associated with only Berlin questionnaire (p=0.015). CONCLUSION The present results support that city bus drivers with high OSA risk according to Berlin questionnaire have increased accident rates. Therefore, we suggest using Berlin questionnaire for screening sleep apnea not only in highway drivers but also in in-city bus drivers. PMID:29755810

Process criticality accident likelihoods, magnitudes and emergency planning. A focus on solution accidents

International Nuclear Information System (INIS)

McLaughlin, Thomas P.

2003-01-01

This paper presents analyses and applications of data from reactor and critical experiment research on the dynamics of nuclear excursions in solution media. Available criticality accident information is also discussed and shown to provide strong evidence of the overwhelming likelihood of accidents in liquid media over other forms and to support the measured data. These analyses are shown to provide valuable insights into key parameters important to understanding solution excursion dynamics in general and in evaluating practical upper bounds on criticality accident magnitudes. This understanding and these upper bounds are directly applicable to the evaluation of the consequences of postulated criticality accidents. These bounds are also essential in order to comply with national and international consensus standards and regulatory requirements for emergency planning. (author)

A study on the implementation effect of accident management strategies on safety

International Nuclear Information System (INIS)

Jae, Moo Sung; Kim, Dong Ha; Jin, Young Ho

1996-01-01

This paper presents a new approach for assessing accident management strategies using containment event trees(CETs) developed during an individual plant examination (IPE) for a reference plant (CE type, 950 MWe PWR). Various accident management strategies to reduce risk have been proposed through IPE. Three strategies for the station blackout sequence are used as an example: 1) reactor cavity flooding only, 2) primary system depressurization only, and 3) doing both. These strategies are assumed to be initiated at about the time of core uncovery. The station blackout (SBO) sequence is selected in this paper since it is identified as one of the most threatening sequences to safety of the reference plant. The effectiveness and adverse effects of each accident management strategy are considered synthetically in the CETs. A best estimate assessment for the developed CETs using data obtained from NUREG-1150, other PRA results, and the MAAP code calculations is performed. The strategies are ranked with respect to minimizing the frequencies of various containment failure modes. The proposed approach is demonstrated to be very flexible in that it can be applied to any kind of accident management strategy for any sequence. 9 refs., 3 figs., 2 tabs. (author)

Small break LOCA [loss of coolant accident] mitigation for Bellefonte

International Nuclear Information System (INIS)

Bayless, P.D.; Dobbe, C.A.

1986-01-01

Several 5-cm (2-in.) diameter cold leg break loss coolant accidents for the Bellefonte nuclear plant were analyzed as part of the Severe Accident Sequence Analysis Program. The transients assumed various system failures, and included the S 2 D sequence. Operator actions to mitigate the S 2 D transient were also investigated. The transients were analyzed until either core damage began or long-term decay heat removal was established. The S 2 D sequence was analyzed into the core damage phase of the transient. The analyses showed that the flow from one high pressure injection pump was necessary and sufficient to prevent core damage in the absence of operator actions. Operator actions were also able to prevent core damage for the S 2 D sequence

Evaluation of the Main Steam Line Break Accident for the APR+ Standard Design using MARS-KS

Energy Technology Data Exchange (ETDEWEB)

Park, M. H.; Kim, Y. S.; Hwang, Min Jeong; Sim, S. K. [Environment Energy Technology, Daejeon (Korea, Republic of); Bang, Young Seok [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2015-05-15

As a part of licensing evaluation of the APR+ (Advanced Power Reactor +) standard design, Korea Institute of Nuclear Safety(KINS) performed safety evaluation of the APR+ Standard Safety Analysis Report(SSAR). The results of the safety evaluation of the APR+ Main Steam Line Break(MSLB) accident is presented for the most limiting post-trip return-to-power case with the single failure assumption of the Loss Of Offsite Power(LOOP). MARS-KS regulatory safety analysis code has been used to evaluate safety as well as the system behavior during MSLB accident. The MARS-KS analysis results are compared with the results of the MSLB safety analysis presented in the SSAR of the APR+. Independent safety evaluation has been performed using MARS-KS regulatory safety analysis code for the APR+ MSLB accident inside containment for the limiting case of the full power post-trip return-to-power. The results of MARS-KS analysis were compared with the results of the MSLB safety analysis presented in the APR+ SSAR. Due to higher cooldown of the MARS-KS analysis, the MARS-KS analysis results in a higher positive reactivity insertion into the core by the negative moderator and fuel temperature reactivity coefficients than the APR+ SSAR analysis. Both results show no return-to-power during the limiting case of the MSLB inside containment. However, APR+ SSAR moderator temperature reactivity insertion should be evaluated against the MARS-KS moderator density reactivity insertion for is conservatism. This study also clearly shows asymmetric thermal hydraulic behavior during the MSLB accident at intact and affected sides of the downcomer and the core. These asymmetric phenomena should be further investigated for the effects on the system design.

Analysis of molten fuel behavior in coolant channel during severe accidents in KALIMER

International Nuclear Information System (INIS)

Suk, Soo Dong; Lee, Yong Bum; Hahn, Do Hee

2004-11-01

Preliminary safety analyses of the KALIMER-600 design have shown that the design has inherent safety characteristics and is capable of accommodating double fault initiators such as ATWS events without boiling coolant or melting fuel. For the future design of liquid metal reactor, however, the evaluation of the safety performance and the determination of containment requirements may require consideration of tripe-fault accident sequences of extremely low probability of occurrence that leads to fuel melting. For any postulated accident sequence which leads to core melting, in-vessel retention of the core debris will required as a design requirement for the future design of LMR. For sodium-cooled core designs with metallic fuel, one of the major phenomenological modeling uncertainties to be resolved is the potential for freezing and plugging of molten metallic fuel in above- and below-core structures and possibly in inter-subassembly spaces. In this study, scoping analyses were carried out to evaluate the penetration depths in the coolant channels by molten fuel mixture during the unprotected loss-of-flow accidents in the core of the KALIMER-600. It is assumed in the analyses that a solid fuel crust would start to form upon contact with the coolant channel structure temperature of which is below the fuel solidus. The analysis results predict that the coolant channels would be plugged by the freezing molten fuel in the inlet lower shield as well as in the outlet, fission-gas-plenum region for the KALIMER-600 design

Overview of the facility accident analysis for the U.S. Department of Energy Environmental Restoration and Waste Management Programmatic Environmental Impact Statement

International Nuclear Information System (INIS)

Mueller, C.; Habegger, L.; Huizenga, D.

1994-01-01

An integrated risk-based approach has been developed to address the human health risks of radiological and chemical releases from potential facility accidents in support of the U.S. Department of Energy (DOE) Environmental Restoration and Waste Management (EM) Programmatic Environmental Impact Statement (PEIS). Accordingly, the facility accident analysis has been developed to allow risk-based comparisons of EM PEIS strategies for consolidating the storage and treatment of wastes at different sites throughout the country. The analysis has also been developed in accordance with the latest DOE guidance by considering the spectrum of accident scenarios that could occur in implementing the various actions evaluated in the EM PEIS. The individual waste storage and treatment operations and inventories at each site are specified by the functional requirements defined for each waste management alternative to be evaluated. For each alternative, the accident analysis determines the risk-dominant accident sequences and derives the source terms from the associated releases. This information is then used to perform health effects and risk calculations that are used to evaluate the various alternatives

MAAP - modular program for analyses of severe accidents

International Nuclear Information System (INIS)

Henry, R.E.; Lutz, R.J.

1990-01-01

The MAAP computer code was developed by Westinghouse as a fast, user-friendly, integrated analytical tool for evaluations of the sequences and consequences of severe accidents. The code allows a fully integrated treatment of thermohydraulic behavior and of the fission products in the primary system, the containment, and the ancillary buildings. This ensures interactive inclusion of all thermohydraulic events and of fission product behavior. All important phenomena which may occur in a major accident are contained in the modular code. In addition, many of the important parameters affecting the multitude of different phenomena can be defined by the user. In this way, it is possible to study the accuracy of the predicted course and of the consequences of a series of major accident phenomena. The MAAP code was subjected to extensive benchmarking with respect to the results of the experimental and theoretical programs, the findings obtained in other safety analyses using computers and data from accidents and transients in plants actually in operation. With the expected connection of the validation and test programs, the computer code attains a quality standard meeting the most stringent requirements in safety analyses. The code will be enlarged further in order to expand the number of benchmarks and the resolution of individual comparisons, and to ensure that future MAAP models will be in better agreement with the experiments and experiences of industry. (orig.) [de

Accidents - Chernobyl accident; Accidents - accident de Tchernobyl

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

This file is devoted to the Chernobyl accident. It is divided in four parts. The first part concerns the accident itself and its technical management. The second part is relative to the radiation doses and the different contaminations. The third part reports the sanitary effects, the determinists ones and the stochastic ones. The fourth and last part relates the consequences for the other European countries with the case of France. Through the different parts a point is tackled with the measures taken after the accident by the other countries to manage an accident, the cooperation between the different countries and the groups of research and studies about the reactors safety, and also with the international medical cooperation, specially for the children, everything in relation with the Chernobyl accident. (N.C.)

Method of assessing severe accident management strategies

International Nuclear Information System (INIS)

Kastenberg, W.E.; Apostolakis, G.; Dhir, V.K.; Okrent, D.; Jae, M.; Lim, H.; Milici, T.; Park, H.; Swider, J.; Xing, L.; Yu, D.

1991-01-01

Accident management can be defined as the innovative use of existing and or alternative resources, systems, and actions to prevent or mitigate a severe accident. A significant number of probabilistic safety assessments (PSAs) have been completed that yield the principal plant vulnerabilities. These vulnerabilities can be categorized as (1) dominant sequences with respect to core-melt frequency. (2) dominant sequences with respect to various risk measures. (3) dominant threats that challenge safety functions. (4) dominant threats with respect to failure of safety systems. For each sequence/threat and each combination of strategy, there may be several options available to the operator. Each strategy/option involves phenomenological and operational considerations regarding uncertainty. These considerations include uncertainties in key phenomena, operator behavior, system availability and behavior, and available information. This paper presents a methodology for assessing severe accident management strategies given the key uncertainties delineated at two workshops held at the University of California, Los Angeles. Based on decision trees and influence diagrams, the methodology is currently being applied to two case studies: cavity flooding in a pressurized water reactor (PWR) to prevent vessel penetration or failure, and drywell flooding in a boiling water reactor to prevent vessel and/or containment failure

Evaluation of severe accident risks: Quantification of major input parameters: MAACS [MELCOR Accident Consequence Code System] input

International Nuclear Information System (INIS)

Sprung, J.L.; Jow, H-N; Rollstin, J.A.; Helton, J.C.

1990-12-01

Estimation of offsite accident consequences is the customary final step in a probabilistic assessment of the risks of severe nuclear reactor accidents. Recently, the Nuclear Regulatory Commission reassessed the risks of severe accidents at five US power reactors (NUREG-1150). Offsite accident consequences for NUREG-1150 source terms were estimated using the MELCOR Accident Consequence Code System (MACCS). Before these calculations were performed, most MACCS input parameters were reviewed, and for each parameter reviewed, a best-estimate value was recommended. This report presents the results of these reviews. Specifically, recommended values and the basis for their selection are presented for MACCS atmospheric and biospheric transport, emergency response, food pathway, and economic input parameters. Dose conversion factors and health effect parameters are not reviewed in this report. 134 refs., 15 figs., 110 tabs

Monetary evaluation of radiation detriment cost in cost/benefit analysis of protective actions after nuclear accidents

International Nuclear Information System (INIS)

Qu, J.; Xue, D.

1998-01-01

This paper discusses the monetary evaluation of radiation detriment cost in the cost/benefit analyses of countermeasures after nuclear accidents. The methods used to determine the so-called α factor in cost/benefit analysis are presented. It is pointed out that the approaches found in current literature to the consideration of individual dose in cost-benefit analyses have some limitations. To overcome those deficiencies, we introduced the concept of individual dose evaluation function in this paper. In addition, we developed a modified approach to cost-benefit analyses of protective actions after nuclear accidents. (author)

Thermal and hydraulic behaviour of CANDU cores under severe accident conditions - final report. Vol. 1

International Nuclear Information System (INIS)

Rogers, J.T.

1984-06-01

This report gives the results of a study of the thermo-hydraulic aspects of severe accident sequences in CANDU reactors. The accident sequences considered are the loss of the moderator cooling system and the loss of the moderator heat sink, each following a large loss-of-coolant accident accompanied by loss of emergency coolant injection. Factors considered include expulsion and boil-off of the moderator, uncovery, overheating and disintegration of the fuel channels, quenching of channel debris, re-heating of channel debris following complete moderator expulsion, formation and possible boiling of a molten pool of core debris and the effectiveness of the cooling of the calandria wall by the shield tank water during the accident sequences. The effects of these accident sequences on the reactor containment are also considered. Results show that there would be no gross melting of fuel during moderator expulsion from the calandria, and for a considerable time thereafter, as quenched core debris re-heats. Core melting would not begin until about 135 minutes after accident initiation in a loss of the moderator cooling system and until about 30 minutes in a loss of the moderator heat sink. Eventually, a pool of molten material would form in the bottom of the calandria, which may or may not boil, depending on property values. In all cases, the molten core would be contained within the calandria, as long as the shield tank water cooling system remains operational. Finally, in the period from 8 to 50 hours after the initiation of the accident, the molten core would re-solidify within the calandria. There would be no consequent damage to containment resulting from these accident sequences, nor would there be a significant increase in fission product releases from containment above those that would otherwise occur in a dual failure LOCA plus LOECI

The Jules Horowitz reactor: complementary safety evaluation in the light of the Fukushima 1 nuclear power station accident

International Nuclear Information System (INIS)

2011-01-01

This report proposes a complementary safety evaluation of the Jules Horowitz reactor in Cadarache (INB 172), one of the French basic nuclear installations (BNI, in French INB) in the light of the Fukushima accident. This evaluation takes the following risks into account: risks of flooding, earthquake, loss of power supply and loss of cooling, in addition to operational management of accident situations. It presents the main characteristics of the installation, identifies the risks of a cliff effect and the main structures and equipment, evaluates the seismic risk (installation sizing, installation conformity, margin evaluation), evaluates the flooding risk (installation sizing, installation conformity, margin evaluation), briefly examines other extreme natural phenomena (extreme meteorological conditions related to flooding, earthquake or flooding with a higher level than that for which the installation is designed). It analyzes the risk of a loss of power supply and of cooling (loss of external and internal electric sources, loss of the ultimate cooling system). It analyzes the management of severe accidents: crisis management organization, available intervention means, robustness of available means. It discusses the conditions of the use of subcontractors

Preliminary evaluation of steam generator tube rupture (SGTR) accident in lead cooled reactor

International Nuclear Information System (INIS)

Frano, R. Lo; Forasassi, G.

2009-01-01

In this paper some contributions are provided to the development of a European Lead-cooled System, known as the ELSY project (within EU-6 Framework Project); that will constitute a possible reference system for a large lead-cooled reactor of GEN IV. Steam generator (SG) tubing of this system type might be subject to a variety of degradation processes, such as cracking, wall thinning and potential leakage or rupture, eventually leading to the failure of one or more SG tubes that constitute a steam generator tube rupture (SGTR) accident with possible consequences for the safety of the primary systems. It is therefore of interest for the designer to know how the SG itself, as well as the vessel and internals structures, behave under impulsive loading conditions (in form of a rapid and strong increase of pressure) that can arise as consequences of the interaction between the primary and secondary coolants (lead-water interaction). The analysed initiator event, as already mentioned, is a large break (up to a double ended guillotine break) of one (or more) SG cooling tubes that may become severe enough to determine dangerous effects on the interested structures. In order to better simulate and perform the mentioned postulated SGTR accident sequence analyses, an appropriate numerical model with the available computing resources (FEM codes) was set up at the DIMNP of Pisa University. That model was used to evaluate the effects of the propagation of the blast pressure waves inside the SG structures, taking into account also the sloshing phenomenon that could be induced by the lead primary coolant motions. Therefore the SGTR effects study may be considered as a transient and non linear problem the solution of which provides the 'time histories' of hydrodynamic pressures and stresses on the reactor pressure vessel and internals walls. (author)

Development of A Methodology for Assessing Various Accident Management Strategies Using Decision Tree Models

Energy Technology Data Exchange (ETDEWEB)

Kim, Nam Yeong; Kim, Jin Tae; Jae, Moo Sung [Hanyang University, Seoul (Korea, Republic of); Jerng, Dong Wook [Chung-Ang University, Seoul (Korea, Republic of)

2016-05-15

The purpose of ASP (Accident Sequence Precursor) analysis is to evaluate operational accidents in full power and low power operation by using PRA (Probabilistic Risk Assessment) technologies. The awareness of the importance of ASP analysis has been on rise. The methodology for ASP analysis has been developed in Korea, KINS (Korea Institute of Nuclear Safety) has managed KINS-ASP program since it was developed. In this study, we applied ASP analysis into operational accidents in full power and low power operation to quantify CCDP (Conditional Core Damage Probability). To reflect these 2 cases into PRA model, we modified fault trees and event trees of the existing PRA model. Also, we suggest the ASP regulatory system in the conclusion. In this study, we reviewed previous studies for ASP analysis. Based on it, we applied it into operational accidents in full power and low power operation. CCDP of these 2 cases are 1.195E-06 and 2.261E-03. Unlike other countries, there is no regulatory basis of ASP analysis in Korea. ASP analysis could detect the risk by assessing the existing operational accidents. ASP analysis can improve the safety of nuclear power plant by detecting, reviewing the operational accidents, and finally removing potential risk. Operator have to notify regulatory institute of operational accident before operator takes recovery work for the accident. After follow-up accident, they have to check precursors in data base to find similar accident.

Qualification of Daiichi Units 1, 2, and 3 Data for Severe Accident Evaluations - Process and Illustrative Examples from Prior TMI-2 Evaluations

Energy Technology Data Exchange (ETDEWEB)

Rempe, Joy Lynn [Idaho National Lab. (INL), Idaho Falls, ID (United States); Knudson, Darrell Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2014-09-01

The accidents at the Three Mile Island Unit 2 (TMI-2) Pressurized Water Reactor (PWR) and the Daiichi Units 1, 2, and 3 Boiling Water Reactors (BWRs) provide unique opportunities to evaluate instrumentation exposed to severe accident conditions. Conditions associated with the release of coolant and the hydrogen burn that occurred during the TMI-2 accident exposed instrumentation to harsh conditions, including direct radiation, radioactive contamination, and high humidity with elevated temperatures and pressures. As part of a program initiated in 2012 by the Department of Energy Office of Nuclear Energy (DOE-NE), a review was completed to gain insights from prior TMI-2 sensor survivability and data qualification efforts. This initial review focused on the set of sensors deemed most important by post-TMI-2 instrumentation evaluation programs. Instrumentation evaluation programs focused on data required by TMI-2 operators to assess the condition of the reactor and containment and the effect of mitigating actions taken by these operators. In addition, prior efforts focused on sensors providing data required for subsequent forensic evaluations and accident simulations. To encourage the potential for similar activities to be completed for qualifying data from Daiichi Units 1, 2, and 3, this report provides additional details related to the formal process used to develop a qualified TMI-2 data base and presents data qualification details for three parameters: primary system pressure; containment building temperature; and containment pressure. As described within this report, sensor evaluations and data qualification required implementation of various processes, including comparisons with data from other sensors, analytical calculations, laboratory testing, and comparisons with sensors subjected to similar conditions in large-scale integral tests and with sensors that were similar in design to instruments easily removed from the TMI-2 plant for evaluations. As documented

Integration of risk aversion in the evaluation of the external cost of a nuclear accident

International Nuclear Information System (INIS)

Eeckhoudt, L.; Schieber, C.; Schneider, Th.

1998-01-01

Full text of publication follows: the external costs of fuel cycles used in the production of electricity are those imposed on society and environment that are not accounted for by the producers and consumers of energy. Within the evaluation of the external cost of the nuclear fuel cycle, the evaluation of a nuclear accident has to be addressed. For this purpose, the basic approach consists in calculating the expected value of various occident scenarios. the main criticism of this approach is that there is a discrepancy between the social acceptability of the risk and the average monetary value which corresponds in principle to the compensation of the consequences for each individual of the population affected by the accident. The aim of this paper is to propose a methodology for the integration of risk aversion, relying on the expected utility approach, as well as a numerical application based on the French data for the external cost of a nuclear accident. Although a huge range of values has been published for the relative risk aversion coefficient, it seems reasonable to adopt a value of 2 for the specific case of nuclear accident. This leads to an estimated multiplying coefficient approximately equal to 20 to be applied to the expected external cost of a nuclear accident corresponding to a release of about 1% of the core. In this case, the external cost of the nuclear accident is estimated to 0.046 mECU/kWh (i.e. about 50% of the total external costs of the nuclear fuel cycle estimated at 0.1 mECU/kWh with a 3% discount rate), instead of 0.0023 mECU/kWh without taking into account risk aversion. (authors)

Atucha-I source terms for sequences initiated by transients

International Nuclear Information System (INIS)

Baron, J.; Bastianelli, B.

1997-01-01

The present work is part of an expected source terms study in the Atucha I nuclear power plant during severe accidents. From the accident sequences with a significant probability to produce core damage, those initiated by operational transients have been identified as the most relevant. These sequences have some common characteristics, in the sense that all of them resume in the opening of the primary system safety valves, and leave this path open for the coolant loss. In the case these sequences continue as severe accidents, the same path will be used for the release of the radionuclides, from the core, through the primary system and to the containment. Later in the severe accident sequence, the failure of the pressure vessel will occur, and the corium will fall inside the reactor cavity, interacting with the concrete. During these processes, more radioactive products will be released inside the containment. In the present work the severe accident simulation initiated by a blackout is performed, from the point of view of the phenomenology of the behavior of the radioactive products, as they are transported in the piping, during the core-concrete interactions, and inside the containment buildings until it failure. The final result is the source term into the atmosphere. (author) [es

Comparison of HRA methods based on WWER-1000 NPP real and simulated accident scenarios

International Nuclear Information System (INIS)

Petkov, Gueorgui

2010-01-01

Full text: Adequate treatment of human interactions in probabilistic safety analysis (PSA) studies is a key to the understanding of accident sequences and their relative importance in overall risk. Human interactions with machines have long been recognized as important contributors to the safe operation of nuclear power plants (NPP). Human interactions affect the ordering of dominant accident sequences and hence have a significant effect on the risk of NPP. By virtue of the ability to combine the treatment of both human and hardware reliability in real accidents, NPP fullscope, multifunctional and computer-based simulators provide a unique way of developing an understanding of the importance of specific human actions for overall plant safety. Context dependent human reliability assessment (HRA) models, such as the holistic decision tree (HDT) and performance evaluation of teamwork (PET) methods, are the so-called second generation HRA techniques. The HDT model has been used for a number of PSA studies. The PET method reflects promising prospects for dealing with dynamic aspects of human performance. The paper presents a comparison of the two HRA techniques for calculation of post-accident human error probability in the PSA. The real and simulated event training scenario 'turbine's stop after loss of feedwater' based on standard PSA model assumptions is designed for WWER-1000 computer simulator and their detailed boundary conditions are described and analyzed. The error probability of post-accident individual actions will be calculated by means of each investigated technique based on student's computer simulator training archives

Corporate Cost of Occupational Accidents

DEFF Research Database (Denmark)

Rikhardsson, Pall M.; Impgaard, M.

2004-01-01

method could be used in all of the companies without revisions. The evaluation of accident cost showed that 2/3 of the costs of occupational accidents are visible in the Danish corporate accounting systems reviewed while 1/3 is hidden from management view. The highest cost of occupational accidents......The systematic accident cost analysis (SACA) project was carried out during 2001 by The Aarhus School of Business and PricewaterhouseCoopers Denmark with financial support from The Danish National Working Environment Authority. Its focused on developing and testing a method for evaluating...... occupational costs of companies for use by occupational health and safety professionals. The method was tested in nine Danish companies within three different industry sectors and the costs of 27 selected occupational accidents in these companies were calculated. One of the main conclusions is that the SACA...

[Analysis and evaluation of occupational accidents in dancers of the dance theatre].

Science.gov (United States)

Wanke, E M; Groneberg, D A; Quarcoo, D

2011-03-01

The dance theatre is an autonomous form of presentation within the performing arts. It is a combination of dance, drama, singing and speaking. As the actors are usually professional dancers the dance theatre is associated with the professional dance. Compared with other dance styles there is an enhanced usage of props, costumes or décor to intensify the production and the expressiveness. In contrast to the defined professional dance technique the range of movements is unlimited. There has not yet been done any research on the influence of props as well as décor in terms of exogenous factors potentially favouring injuries. Aim of this study is to characterize specific injury patterns, as well as their causes and to suggest basic approaches to prevent injuries in the dance theatre. The data of this evaluation comprise occupational accident reports, accident reports of various Berlin theatres as well as case records of all Berlin State Theatres (n = 1106) of the Berlin State Accident Insurance over a 9-year period. 103 occupational accidents are accounted for the dance theatre. 44.6 % of the accidents happen during rehearsals, 42.4 % during performances, 76.7 % on stage and adjoining areas and 10.7 % in the ballet studio. Second most common movement resulting in an injury are jumps with 25.4 %. Altogether 69.7 % of the accidents have a uniquely defined exogenous cause with 30.5 % by props, 12.7 % by the floor and 17.2 % by the dance partner. 30.3 % of the accidents have multifactorial causes (e. g. the social situation, state of training and nutrition). 61 % of all accidents happen within three hours after starting work with an increase of occupational accidents between 11:00 - 12:00 hrs and 08:00- 09:00 hrs. The lower extremity is the most affected location (53.3 %), followed by the head/neck area (21.4 %) and the upper extremity (17.5 %). Contusions (26.2 %), distortions (17.5 %), muscular strains (19.4 %) and wounds (13.6 %) are the most frequent types of

Process criticality accident likelihoods, consequences and emergency planning

International Nuclear Information System (INIS)

McLaughlin, T.P.

1992-01-01

Evaluation of criticality accident risks in the processing of significant quantities of fissile materials is both complex and subjective, largely due to the lack of accident statistics. Thus, complying with national and international standards and regulations which require an evaluation of the net benefit of a criticality accident alarm system, is also subjective. A review of guidance found in the literature on potential accident magnitudes is presented for different material forms and arrangements. Reasoned arguments are also presented concerning accident prevention and accident likelihoods for these material forms and arrangements. (Author)

Structural evaluation of electrosleeved tubes under severe accident transients

International Nuclear Information System (INIS)

Majumdar, S.

1999-01-01

A flow stress model was developed for predicting failure of Electrosleeved PWR steam generator tubing under severe accident transients. The Electrosleeve, which is nanocrystalline pure nickel, loses its strength at temperatures greater than 400 C during severe accidents because of grain growth. A grain growth model and the Hall-Petch relationship were used to calculate the loss of flow stress as a function of time and temperature during the accident. Available tensile test data as well as high temperature failure tests on notched Electrosleeved tube specimens were used to derive the basic parameters of the failure model. The model was used to predict the failure temperatures of Electrosleeved tubes with axial cracks in the parent tube during postulated severe accident transients

Release of fission products during controlled loss-of-coolant accidents and hypothetical core meltdown accidents

International Nuclear Information System (INIS)

Albrecht, H.; Malinauskas, A.P.

1978-01-01

A few years ago the Projekt Nukleare Sicherheit joined the United States Nuclear Regulatory Commission in the development of a research program which was designed to investigate fission product release from light water reactor fuel under conditions ranging from spent fuel shipping cask accidents to core meltdown accidents. Three laboratories have been involved in this cooperative effort. At Argonne National Laboratory (ANL), the research effort has focused on noble gas fission product release, whereas at Oak Ridge National Laboratory (ORNL) and at Kernforschungszentrum Karlsruhe (KfK), the studies have emphasized the release of species other than the noble gases. In addition, the ORNL program has been directed toward the development of fission product source terms applicable to analyses of spent fuel shipping cask accidents and controlled loss-of-coolant accidents, and the KfK program has been aimed at providing similar source terms which are characteristic of core meltdown accidents. The ORNL results are presented for fission product release from defected fuel rods into a steam atmosphere over the temperature range 500 to 1200 0 C, and the KfK results for release during core meltdown sequences

Severe accident analysis using MARCH 1.0 code

International Nuclear Information System (INIS)

Guimaraes, A.C.F.

1987-09-01

The description and utilization of the MARCH 1.0 computer code, which aim to analyse physical phenomena associated with core meltdown accidents in PWR type reactors, are presented. The primary system is modeled as a single volume which is partitioned into a gas (steam and hydrogen) region and a water region. March predicts blowdown from the primary system in single phase. Based on results of the probabilistic safety analysis for the Zion and Indian Point Nuclear Power Plants, the S 2 HFX sequence accident for Angra-1 reactor is studied. The S 2 HFX sequence means that the loss of coolant accident occurs through small break in primary system with bot total failures of the reactor safety system and containment in yours recirculation modes, leading the core melt and the containment failure due to overpressurization. The obtained results were considered reasonable if compared with the results obtained for the Zion and Indian Point nuclear power plants. (Author) [pt

The nature of reactor accidents

International Nuclear Information System (INIS)

Domaratzki, Z.; Campbell, F.R.; Atchison, R.J.

1981-01-01

Reactor accidents are events which result in the release of radioactive material from a nuclear power plant due to the failure of one or more critical components of that plant. The failures, depending on their number and type, can result in releases whose consequences range from negligible to catastrophic. By way of examples, this paper describes four specific accidents which cover this range of consequence: failure of a reactor control system, loss of coolant, loss of coolant with impaired containment, and reactor core meltdown. For each a possible sequence of events and an estimate of the expected frequency are presented

Evaluation of methods to compare consequences from hazardous materials transportation accidents

International Nuclear Information System (INIS)

Rhoads, R.E.; Franklin, A.L.; Lavender, J.C.

1986-10-01

This report presents the results of a project to develop a framework for making meaningful comparisons of the consequences from transportation accidents involving hazardous materials. The project was conducted in two phases. In Phase I, methods that could potentially be used to develop the consequence comparisons for hazardous material transportation accidents were identified and reviewed. Potential improvements were identified and an evaluation of the improved methods was performed. Based on this evaluation, several methods were selected for detailed evaluation in Phase II of the project. The methods selected were location-dependent scenarios, figure of merit and risk assessment. This evaluation included application of the methods to a sample problem which compares the consequences of four representative hazardous materials - chlorine, propane, spent nuclear fuel and class A explosives. These materials were selected because they represented a broad class of hazardous material properties and consequence mechanisms. The sample case aplication relied extensively on consequence calculations performed in previous transportation risk assessment studies. A consultant was employed to assist in developing consequence models for explosives. The results of the detailed evaluation of the three consequence comparison methods indicates that methods are available to perform technically defensible comparisons of the consequences from a wide variety of hazardous materials. Location-dependent scenario and risk assessment methods are available now and the figure of merit method could be developed with additional effort. All of the methods require substantial effort to implement. Methods that would require substantially less effort were identified in the preliminary evaluation, but questions of technical accuracy preclude their application on a scale. These methods may have application to specific cases, however

Severe accident modeling and offsite dose consequence evaluations for nuclear power plant emergency planning

Energy Technology Data Exchange (ETDEWEB)

Chen, S.H.; Feng, T.S.; Huang, K.C. [National Tsing-Hua Univ., Hsinchu, Taiwan (China); Wang, J.R. [Inst. of Nuclear Energy Research, Longtan, Taiwan (China); Cheng, Y.H. [Industrial Tech. Res. Inst., Hsinchu, Taiwan (China); Shih, C., E-mail: ckshih@ess.nthu.edu.tw [National Tsing-Hua Univ., Hsinchu, Taiwan (China)

2011-07-01

We have investigated the roles of Firewater Addition System and Passive Flooder in ABWR severe accidents, such as LOCA and SBO. The results are apparent that Firewater System is vital in the highly unlikely situation where all AC are lost. Also in this paper, we present EPZDose, an effective and faster-than-real time code for offsite dose consequences predictions and evaluations. Illustrations with the release from our severe accident scenario show friendly and informative user's interface for supporting decision makings in nuclear emergency situations. (author)

Hand-calculation technique for the evaluation of public risk from a severe accident at a nuclear power plant

International Nuclear Information System (INIS)

Linn, M.A.; Schmoyer, R.E.

1993-01-01

The Nuclear Regulatory Commission (NRC) is in the process of promulgating a proposed rule 10 CFR Part 54, ''Requirements for Renewal of Operating Licensees for Nuclear Power Plants,'' which will allow licenses to renew the operating licenses on their nuclear power plants for an additional 20 years beyond the original 40-year limit. A Generic Environmental Impact Statement (GEIS) prepared by the Oak Ridge National Laboratory (ORNL) in conjunction with and for the Nuclear Regulatory Commission to assess the environmental issues associated with this proposed rule. The evaluation of the environmental impact from postulated severe accidents was included in the GEIS. During this evaluation of postulated severe accidents, a method was developed to estimate the public health consequences of atmospheric releases from severe accidents that is much simpler to use than existing consequence computer codes. From the results of this work, it is concluded that the simplified methodology does provide reasonable and conservative estimates of public risk from atmospheric releases from severe accidents

Probabilistic risk assessment for the Los Alamos Meson Physics Facility worst-case design-basis accident

International Nuclear Information System (INIS)

Sharirli, M.; Butner, J.M.; Rand, J.L.; Macek, R.J.; McKinney, S.J.; Roush, M.L.

1992-01-01

This paper presents results from a Los Alamos National Laboratory Engineering and Safety Analysis Group assessment of the worse-case design-basis accident associated with the Clinton P. Anderson Meson Physics Facility (LAMPF)/Weapons Neutron Research (WNR) Facility. The primary goal of the analysis was to quantify the accident sequences that result in personnel radiation exposure in the WNR Experimental Hall following the worst-case design-basis accident, a complete spill of the LAMPF accelerator 1L beam. This study also provides information regarding the roles of hardware systems and operators in these sequences, and insights regarding the areas where improvements can increase facility-operation safety. Results also include confidence ranges to incorporate combined effects of uncertainties in probability estimates and importance measures to determine how variations in individual events affect the frequencies in accident sequences

Swedish REGULATORY APPROACH TO SAFETY Assessment AND SEVERE ACCIDENT MANAGEMENT

International Nuclear Information System (INIS)

Frid, W.; Sandervaag, O.

1997-01-01

The Swedish regulatory approach to safety assessment and severe accident management is briefly described. The safety assessment program, which focuses on prevention of incidents and accidents, has three main components: periodic safety reviews, probabilistic safety analysis, and analysis of postulated disturbances and accident progression sequences. Management and man-technology-organisation issues, as well as inspections, play a key role in safety assessment. Basis for severe accident management were established by the Government decisions in 1981 and 1986. By the end of 1988, the severe accident mitigation systems and emergency operating procedures were implemented at all Swedish reactors. The severe accident research has continued after 1988 for further verification of the protection provided by the systems and reduction of remaining uncertainties in risk dominant phenomena

Structural aspects of the Chernobyl accident

International Nuclear Information System (INIS)

Murray, R.C.; Cummings, G.E.

1988-01-01

On April 26, 1986 the world's worst nuclear power plant accident occurred at the Unit 4 of the Chernobyl Nuclear Power Station in the USSR. This paper presents a discussion of the design of the Chernobyl Power Plant, the sequence of events that led to the accident and the damage caused by the resulting explosion. The structural design features that contributed to the accident and resulting damage will be highlighted. Photographs and sketches obtained from various worldwide news agencies will be shown to try and gain a perspective of the extent of the damage. The aftermath, clean-up, and current situation will be discussed and the important lessons learned for the structural engineer will be presented. 15 refs., 10 figs

Final report of the accident phenomenology and consequence (APAC) methodology evaluation. Spills Working Group

Energy Technology Data Exchange (ETDEWEB)

Brereton, S.; Shinn, J. [Lawrence Livermore National Lab., CA (United States); Hesse, D [Battelle Columbus Labs., OH (United States); Kaninich, D. [Westinghouse Savannah River Co., Aiken, SC (United States); Lazaro, M. [Argonne National Lab., IL (United States); Mubayi, V. [Brookhaven National Lab., Upton, NY (United States)

1997-08-01

The Spills Working Group was one of six working groups established under the Accident Phenomenology and Consequence (APAC) methodology evaluation program. The objectives of APAC were to assess methodologies available in the accident phenomenology and consequence analysis area and to evaluate their adequacy for use in preparing DOE facility safety basis documentation, such as Basis for Interim Operation (BIO), Justification for Continued Operation (JCO), Hazard Analysis Documents, and Safety Analysis Reports (SARs). Additional objectives of APAC were to identify development needs and to define standard practices to be followed in the analyses supporting facility safety basis documentation. The Spills Working Group focused on methodologies for estimating four types of spill source terms: liquid chemical spills and evaporation, pressurized liquid/gas releases, solid spills and resuspension/sublimation, and resuspension of particulate matter from liquid spills.

Accident management insights after the Fukushima Daiichi NPP accident

International Nuclear Information System (INIS)

Degueldre, Didier; Viktorov, Alexandre; Tuomainen, Minna; Ducamp, Francois; Chevalier, Sophie; Guigueno, Yves; Tasset, Daniel; Heinrich, Marcus; Schneider, Matthias; Funahashi, Toshihiro; Hotta, Akitoshi; Kajimoto, Mitsuhiro; Chung, Dae-Wook; Kuriene, Laima; Kozlova, Nadezhda; Zivko, Tomi; Aleza, Santiago; Jones, John; McHale, Jack; Nieh, Ho; Pascal, Ghislain; ); Nakoski, John; Neretin, Victor; Nezuka, Takayoshi; )

2014-01-01

The Fukushima Daiichi nuclear power plant (NPP) accident, that took place on 11 March 2011, initiated a significant number of activities at the national and international levels to reassess the safety of existing NPPs, evaluate the sufficiency of technical means and administrative measures available for emergency response, and develop recommendations for increasing the robustness of NPPs to withstand extreme external events and beyond design basis accidents. The OECD Nuclear Energy Agency (NEA) is working closely with its member and partner countries to examine the causes of the accident and to identify lessons learnt with a view to the appropriate follow-up actions to be taken by the nuclear safety community. Accident management is a priority area of work for the NEA to address lessons being learnt from the accident at the Fukushima Daiichi NPP following the recommendations of Committee on Nuclear Regulatory Activities (CNRA), Committee on the Safety of Nuclear Installations (CSNI), and Committee on Radiation Protection and Public Health (CRPPH). Considering the importance of these issues, the CNRA authorised the formation of a task group on accident management (TGAM) in June 2012 to review the regulatory framework for accident management following the Fukushima Daiichi NPP accident. The task group was requested to assess the NEA member countries needs and challenges in light of the accident from a regulatory point of view. The general objectives of the TGAM review were to consider: - enhancements of on-site accident management procedures and guidelines based on lessons learnt from the Fukushima Daiichi NPP accident; - decision-making and guiding principles in emergency situations; - guidance for instrumentation, equipment and supplies for addressing long-term aspects of accident management; - guidance and implementation when taking extreme measures for accident management. The report is built on the existing bases for capabilities to respond to design basis

Chernobylsk accident (Causes and Consequences)- Part 2

International Nuclear Information System (INIS)

Esteves, D.

1986-09-01

The causes and consequences of the nuclear accident at Chernobylsk-4 reactor are shortly described. The informations were provided by Russian during the specialist meeting, carried out at seat of IAEA. The Russian nuclear panorama; the site, nuclear power plant characteristics and sequence of events; the immediate measurements after accident; monitoring/radioactive releases; environmental contamination and ecological consequences; measurements of emergency; recommendations to increase the nuclear safety; and recommendations of work groups, are presented. (M.C.K.) [pt

Analysis and research status of severe core damage accidents

International Nuclear Information System (INIS)

1984-03-01

The Severe Core Damage Research and Analysis Task Force was established in Nuclear Safety Research Center, Tokai Research Establishment, JAERI, in May, 1982 to make a quantitative analysis on the issues related with the severe core damage accident and also to survey the present status of the research and provide the required research subjects on the severe core damage accident. This report summarizes the results of the works performed by the Task Force during last one and half years. The main subjects investigated are as follows; (1) Discussion on the purposes and necessities of severe core damage accident research, (2) proposal of phenomenological research subjects required in Japan, (3) analysis of severe core damage accidents and identification of risk dominant accident sequences, (4) investigation of significant physical phenomena in severe core damage accidents, and (5) survey of the research status. (author)

Discussion of the concept of safety indicators from the point of view of TfUX2 accident sequence for Forsmark 3

International Nuclear Information System (INIS)

Bujor, A.

1991-01-01

This paper contains general considerations on the safety indicators, with details at the system level and for the operator actions. For the system analysis, a modular analysis at a low detailed level is proposed (Module System Approach) in order to emphasize the safety related aspects at the subsystem (module) level. The operator actions are divided in ''active actions'' (actions in the control room during incident/accident situations) and ''passive actions'' (actions during tests, maintenance, repairs, etc.) and are analysed separately. In the second part, a discussion of a possible way to apply some SI to the TfUX2 accident sequence for FORSMARK-3, is done. For the analysis of the Auxiliary Feedwater Systems (AFWS) an equation is proposed to derive target values for the failure probability on demand at the train level, given the target value at the system level, including the common cause failures between the redundant trains. (author) 6 tabs., 18 refs

Overview of core disruptive accidents

International Nuclear Information System (INIS)

Marchaterre, J.F.

1977-01-01

An overview of the analysis of core-disruptive accidents is given. These analyses are for the purpose of understanding and predicting fast reactor behavior in severe low probability accident conditions, to establish the consequences of such conditions and to provide a basis for evaluating consequence limiting design features. The methods are used to analyze core-disruptive accidents from initiating event to complete core disruption, the effects of the accident on reactor structures and the resulting radiological consequences are described

Spent fuel transport cask thermal evaluation under normal and accident conditions

Energy Technology Data Exchange (ETDEWEB)

Pugliese, G. [Department of Mechanical, Nuclear and Production Engineering, University of Pisa, Via Diotisalvi, no 2-56126 Pisa (Italy); Lo Frano, R., E-mail: rosa.lofrano@ing.unipi.i [Department of Mechanical, Nuclear and Production Engineering, University of Pisa, Via Diotisalvi, no 2-56126 Pisa (Italy); Forasassi, G. [Department of Mechanical, Nuclear and Production Engineering, University of Pisa, Via Diotisalvi, no 2-56126 Pisa (Italy)

2010-06-15

The casks used for transport of nuclear materials, especially the spent fuel element (SPE), must be designed according to rigorous acceptance criteria and standards requirements, e.g. the International Atomic Energy Agency ones, in order to provide protection to people and environment against radiation exposure particularly in a severe accident scenario. The aim of this work was the evaluation of the integrity of a spent fuel cask under both normal and accident scenarios transport conditions, such as impact and rigorous fire events, in according to the IAEA accident test requirements. The thermal behaviour and the temperatures distribution of a Light Water Reactor (LWR) spent fuel transport cask are presented in this paper, especially with reference to the Italian cask designed by AGN, which was characterized by a cylindrical body, with water or air inside the internal cavity, and two lateral shock absorbers. Using the finite element code ANSYS a series of thermal analyses (steady-state and transient thermal analyses) were carried out in order to obtain the maximum fuel temperature and the temperatures field in the body of the cask, both in normal and in accidents scenario, considering all the heat transfer modes between the cask and the external environment (fire in the test or air in the normal conditions) as well as inside the cask itself. In order to follow the standards requirements, the thermal analyses in accidents scenarios were also performed adopting a deformed shape of the shock absorbers to simulate the mechanical effects of a previous IAEA 9 m drop test event. Impact tests on scale models of the shock absorbers have already been conducted in the past at the Department of Mechanical, Nuclear and Production Engineering, University of Pisa, in the '80s. The obtained results, used for possible new licensing approval purposes by the Italian competent Authority of the cask for PWR spent fuel cask transport by the Italian competent Authority, are

Social aspects in evaluation of health status of subjects who participated in liquidation of radiation accident consequences

International Nuclear Information System (INIS)

Tukov, A.R.; Kleev, N.A.; Shafranskij, I.L.

2000-01-01

The morbidity rate of the Russian atomic industry workers, the liquidators of ChNPP accident consequences and their future life span shorting with an account of their social status are evaluated. Tentative and standard morbidity values were calculated with an account of various social groups of the liquidators. Intensive values of the man-year losses were used in the methodology for evaluating the vital potential losses. The study results indicated considerable morbidity difference in certain diseases by the persons of various social groups, who took part in liquidation of the ChNPP accident consequences [ru

Accident analysis for PRC-II reactor

International Nuclear Information System (INIS)

Wei Yongren; Tang Gang; Wu Qing; Lu Yili; Liu Zhifeng

1997-12-01

The computer codes, calculation models, transient results, sensitivity research, design improvement, and safety evaluation used in accident analysis for PRC-II Reactor (The Second Pulsed Reactor in China) are introduced. PRC-II Reactor is built in big populous city, so the public pay close attention to reactor safety. Consequently, Some hypothetical accidents are analyzed. They include an uncontrolled control rod withdrawal at rated power, a pulse rod ejection at rated power, and loss of coolant accident. Calculation model which completely depict the principle and process for each accident is established and the relevant analysis code is developed. This work also includes comprehensive computing and analyzing transients for each accident of PRC-II Reactor; the influences in the reactor safety of all kind of sensitive parameters; evaluating the function of engineered safety feature. The measures to alleviate the consequence of accident are suggested and taken in the construction design of PRC-II Reactor. The properties of reactor safety are comprehensively evaluated. A new advanced calculation model (True Core Uncovered Model) of LOCA of PRC-II Reactor and the relevant code (MCRLOCA) are first put forward

Risk analysis of releases from accidents during mid-loop operation at Surry

International Nuclear Information System (INIS)

Jo, J.; Lin, C.C.; Nimnual, S.; Mubayi, V.; Neymotin, L.

1992-11-01

Studies and operating experience suggest that the risk of severe accidents during low power operation and/or shutdown (LP/S) conditions could be a significant fraction of the risk at full power operation. Two studies have begun at the Nuclear Regulatory Commission (NRC) to evaluate the severe accident progression from a risk perspective during these conditions: One at the Brookhaven National Laboratory for the Surry plant, a pressurized water reactor (PWR), and the other at the Sandia National Laboratories for the Grand Gulf plant, a boiling water reactor (BWR). Each of the studies consists of three linked, but distinct, components: a Level I probabilistic risk analysis (PRA) of the initiating events, systems analysis, and accident sequences leading to core damage; a Level 2/3 analysis of accident progression, fuel damage, releases, containment performance, source term and consequences-off-site and on-site; and a detailed Human Reliability Analysis (HRA) of actions relevant to plant conditions during LP/S operations. This paper summarizes the approach taken for the Level 2/3 analysis at Surry and provides preliminary results on the risk of releases and consequences for one plant operating state, mid-loop operation, during shutdown

Dose calculations for severe LWR accident scenarios

International Nuclear Information System (INIS)

Margulies, T.S.; Martin, J.A. Jr.

1984-05-01

This report presents a set of precalculated doses based on a set of postulated accident releases and intended for use in emergency planning and emergency response. Doses were calculated for the PWR (Pressurized Water Reactor) accident categories of the Reactor Safety Study (WASH-1400) using the CRAC (Calculations of Reactor Accident Consequences) code. Whole body and thyroid doses are presented for a selected set of weather cases. For each weather case these calculations were performed for various times and distances including three different dose pathways - cloud (plume) shine, ground shine and inhalation. During an emergency this information can be useful since it is immediately available for projecting offsite radiological doses based on reactor accident sequence information in the absence of plant measurements of emission rates (source terms). It can be used for emergency drill scenario development as well

External Reactor Vessel Cooling Evaluation for Severe Accident Mitigation in NPP Krsko

International Nuclear Information System (INIS)

Mihalina, M.; Spalj, S.; Glaser, B.

2016-01-01

The In-Vessel corium Retention (IVR) through the External Reactor Vessel Cooling (ERVC) is mean for maintaining the reactor vessel integrity during a severe accident, by cooling and retaining the molten material inside the reactor vessel. By doing this, significant portion of severe accident negative phenomena connected with reactor vessel failure could be avoided. In this paper, analysis of NPP Krsko applicability for IVR strategy was performed. It includes overview of performed plant related analysis with emphasis on wet cavity modification, plant's site specific walk downs, new applicable probabilistic and deterministic analysis, evaluation of new possibilities for ERVC strategy implementation regarding plant's post-Fukushima improvements and adequacy with plant's procedures for severe accident mitigation. Conclusion is that NPP Krsko could perform in-vessel core retention by applying external reactor vessel cooling strategy with reasonable confidence in success. Per probabilistic and deterministic analysis, time window for successful ERVC strategy performance for most dominating plant damage state scenarios is 2.5 hours, when onset of core damage is observed. This action should be performed early after transition to Severe Accident Management Guidance's (SAMG). For loss of all AC power scenario, containment flooding could be initiated before onset of core damage within related emergency procedure. To perform external reactor vessel cooling, reactor water storage tank gravity drain with addition of alternate water is needed to be injected into the containment. ERVC strategy will positively interfere with other severe accident strategies. There are no negative effects due to ERVC performance. New flooding level will not threaten equipment and instrumentation needed for long term SAMGs performance and eventually diluted containment sump borated water inventory will not cause return to criticality during eventual recirculation phase due to the

Preliminary steps towards assessing aerosol retention in the break stage of a dry steam generator during severe accident SGTR sequences

International Nuclear Information System (INIS)

Herranz, L.E.; Lopez del Pra, C.; Sanchez Velasco, F.J.

2006-01-01

Severe accidents SGTR sequences are identified as major contributors to risk of PWRs. Their relevance lies in the potential radioactive release from reactor coolant system to the environment. Lack of knowledge on the source term attenuation capability of the steam generator has avoided its consideration in probabilistic safety studies and severe accident management guidelines. This paper describes a research program presently under way on the aerosol retention in the nearby of the tube breach within the secondary side of the steam generation in the absence of water. Its development has been internationally framed within the EU-SGTR and the ARTIST program. Experimental activities are focused on setting up a reliable database in which the influence of gas mass flow rate, breach configuration and particle nature in the aerosol retention are properly considered. Theoretical activities are aimed at developing a predictive tool (ARISG) capable of assessing source term attenuation in the scenario with reasonable accuracy. Given the major importance of jet aerodynamics, 3D CFD analyses are being conducted to assist both test interpretation and model development. (author)

Operator modeling of a loss-of-pumping accident using MicroSAINT

International Nuclear Information System (INIS)

Olsen, L.M.

1992-01-01

The Savannah River Laboratory (SRL) human factors group has been developing methods for analyzing nuclear reactor operator actions during hypothetical design-basis accident scenarios. The SRL reactors operate at a lower temperature and pressure than power reactors resulting in accident sequences that differ from those of power reactors. Current methodology development is focused on modeling control room operator response times dictated by system event times specified in the Savannah River Site Reactor Safety Analysis Report (SAR). The modeling methods must be flexible enough to incorporate changes to hardware, procedures, or postulated system event times and permit timely evaluation. The initial model developed was for the loss-of-pumping accident (LOPA) because a significant number of operator actions are required to respond to this postulated event. Human factors engineers had been researching and testing a network modeling simulation language called MicroSAINT to simulate operators' personal and interpersonal actions relative to operating system events. The LOPA operator modeling project demonstrated the versatility and flexibility of MicroSAINT for modeling control room crew interactions

Evaluation of the influences of nuclear accident by hedonic approach

International Nuclear Information System (INIS)

Takai, Toru

2005-01-01

The purpose of this sturdy is to examine the influences on residential land prices of criticality accident in Tokai-mura. To clarify the influences, three types of hedonic model are used to estimate land prices around JCO before and after the accident. The result of estimation indicates that land prices decreased according to proximity to JCO after the accident. (author)

Investigation of evaluation method for marine radiological impact during an accident

International Nuclear Information System (INIS)

2013-01-01

In 2012, JNES investigated the evaluation method, long-term seawater and marine deposition for release and diffusion to the ocean at the accident, and marine impact assessment code, in Japan and overseas. Also, the foreign regulations for marine radiological impact (direct release to ocean from the facilities and fallout on marine, etc.) were investigated. Furthermore, the index (e.g., intervention level) at emergency control in USA and Europe were investigated. (author)

Investigation of evaluation method for marine radiological impact during an accident

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

In 2012, JNES investigated the evaluation method, long-term seawater and marine deposition for release and diffusion to the ocean at the accident, and marine impact assessment code, in Japan and overseas. Also, the foreign regulations for marine radiological impact (direct release to ocean from the facilities and fallout on marine, etc.) were investigated. Furthermore, the index (e.g., intervention level) at emergency control in USA and Europe were investigated. (author)

Process criticality accident likelihoods, consequences, and emergency planning

Energy Technology Data Exchange (ETDEWEB)

McLaughlin, T.P.

1991-01-01

Evaluation of criticality accident risks in the processing of significant quantities of fissile materials is both complex and subjective, largely due to the lack of accident statistics. Thus, complying with standards such as ISO 7753 which mandates that the need for an alarm system be evaluated, is also subjective. A review of guidance found in the literature on potential accident magnitudes is presented for different material forms and arrangements. Reasoned arguments are also presented concerning accident prevention and accident likelihoods for these material forms and arrangements. 13 refs., 1 fig., 1 tab.

Evaluating advancements in accident investigations using a novel framework

NARCIS (Netherlands)

Karanikas, N.; Soltani, P.; de Boer, R.J.; Roelen, A.

2015-01-01

Safety is monitored by various proactive and reactive methods, including the investigation of adverse accidents and incidents, which are collectively known as safety investigations. In this study we demonstrate how accident and incident investigation reports can be useful to identify implicit safety

The nuclear accidents: Causes and consequences

International Nuclear Information System (INIS)

Rochd, M.

1988-01-01

The author discussed and compared the real causes of T.M.I. and Chernobyl accidents and cited their consequences. To better understand how these accidents occurred, a brief description of PWR type (reactor type of T.M.I.) and of RBMK type (reactor type of Chernobyl) has been presented. The author has also set out briefly the safety analysis objectives and the three barriers established to protect the public against the radiological consequences. To distinguish failures that cause severe accidents and to analyze them in details, it is necessary to classify the accidents. There are many ways to do it according to their initiator event, or to their frequency, or to their degree of gravity. The safety criteria adopted by nuclear industry have been explained. These criteria specify the limits of certain physical parameters that should not be exceeded in case of incidents or accidents. To compare the real causes of T.M.I. and Chernobyl accidents, the events that led to both have been presented. As observed the main common contributing factors in both cases are that the operators did not pay attention to warnings and signals that were available to them and that they were not trained to handle these accident sequences. The essential conclusions derived from these severe accidents are: -The improvement of operators competence contribute to reduce the accident risks; -The rapid and correct diagnosis of real conditions at each point of the accidents permits an appropriate behavior that would bring the plant to a stable state; -Competent technical teams have to intervene and to assist the operators in case of emergency; -Emergency plans and an international collaboration are necessary to limit the accident risks. 11 figs. (author)

Development of integrated accident management assessment technology

International Nuclear Information System (INIS)

Jung, Won Dea; Ha, Jae Joo; Jin, Young Ho

2002-04-01

This project aims to develop critical technologies for accident management through securing evaluation frameworks and supporting tools, in order to enhance capabilities coping with severe accidents. For the research goal, firstly under the viewpoint of accident prevention, on-line risk monitoring system and the analysis framework for human error have been developed. Secondly, the training/supporting systems including the training simulator and the off-site risk evaluation system have been developed to enhance capabilities coping with severe accidents. Four kinds of research results have been obtained from this project. Firstly, the framework and taxonomy for human error analysis has been developed for accident management. As the second, the supporting system for accident managements has been developed. Using data that are obtained through the evaluation of off-site risk for Younggwang site, the risk database as well as the methodology for optimizing emergency responses has been constructed. As the third, a training support system, SAMAT, has been developed, which can be used as a training simulator for severe accident management. Finally, on-line risk monitoring system, DynaRM, has been developed for Ulchin 3 and 4 unit

Deterministic analyses of severe accident issues

International Nuclear Information System (INIS)

Dua, S.S.; Moody, F.J.; Muralidharan, R.; Claassen, L.B.

2004-01-01

Severe accidents in light water reactors involve complex physical phenomena. In the past there has been a heavy reliance on simple assumptions regarding physical phenomena alongside of probability methods to evaluate risks associated with severe accidents. Recently GE has developed realistic methodologies that permit deterministic evaluations of severe accident progression and of some of the associated phenomena in the case of Boiling Water Reactors (BWRs). These deterministic analyses indicate that with appropriate system modifications, and operator actions, core damage can be prevented in most cases. Furthermore, in cases where core-melt is postulated, containment failure can either be prevented or significantly delayed to allow sufficient time for recovery actions to mitigate severe accidents

Injury protection and accident causation parameters for vulnerable road users based on German In-Depth Accident Study GIDAS.

Science.gov (United States)

Otte, Dietmar; Jänsch, Michael; Haasper, Carl

2012-01-01

Within a study of accident data from GIDAS (German In-Depth Accident Study), vulnerable road users are investigated regarding injury risk in traffic accidents. GIDAS is the largest in-depth accident study in Germany. Due to a well-defined sampling plan, representativeness with respect to the federal statistics is also guaranteed. A hierarchical system ACASS (Accident Causation Analysis with Seven Steps) was developed in GIDAS, describing the human causation factors in a chronological sequence. The accordingly classified causation factors - derived from the systematic of the analysis of human accident causes ("7 steps") - can be used to describe the influence of accident causes on the injury outcome. The bases of the study are accident documentations over ten years from 1999 to 2008 with 8204 vulnerable road users (VRU), of which 3 different groups were selected as pedestrians n=2041, motorcyclists n=2199 and bicyclists n=3964, and analyzed on collisions with cars and trucks as well as vulnerable road users alone. The paper will give a description of the injury pattern and injury mechanisms of accidents. The injury frequencies and severities are pointed out considering different types of VRU and protective measures of helmet and clothes of the human body. The impact points are demonstrated on the car, following to conclusion of protective measures on the vehicle. Existing standards of protection devices as well as interdisciplinary research, including accident and injury statistics, are described. With this paper, a summarization of the existing possibilities on protective measures for pedestrians, bicyclists and motorcyclists is given and discussed by comparison of all three groups of vulnerable road users. Also the relevance of special impact situations and accident causes mainly responsible for severe injuries are pointed out, given the new orientation of research for the avoidance and reduction of accident patterns. 2010 Elsevier Ltd. All rights reserved.

Optimization of the Severe Accident Management Strategy for Domestic Plants and Validation Experiments

International Nuclear Information System (INIS)

Kim, S. B.; Kim, H. D.; Koo, K. M.; Park, R. J.; Hong, S. H.; Cho, Y. R.; Kim, J. T.; Ha, K. S.; Kang, K. H.

2007-04-01

nuclear power plants, a technical basis report and computational aid tools were developed in parallel with the experimental and analytical works for the resolution of the uncertain safety issues. ELIAS experiments were carried out to quantify the boiling heat removal rate at the upper surface of a metallic layer for precise evaluations on the effect of a late in-vessel coolant injection. T-HERMES experiments were performed to examine the two-phase natural circulation phenomena through the gap between the reactor vessel and the insulator in the APR1400. Detailed analyses on the hydrogen control in the APR1400 containment were performed focused on the effect of spray system actuation on the hydrogen burning and the evaluation of the hydrogen behavior in the IRWST. To develop the technical basis report for the severe accident management, analyses using SCDAP/RELAP5 code were performed for the accident sequences of the OPR1000. Based on the experimental and analytical results performed in this study, the computational aids for the evaluations of hydrogen flammability in the containment, criteria of the in-vessel corium cooling, criteria of the external reactor vessel cooling were developed. An ASSA code was developed to validate the signal from the instrumentations during the severe accidents and to process the abnormal signal. Since ASSA can perform the signal processing from the direct input of the nuclear power plant during the severe accident, it can be platform of the computational aids. In this study, the ASSA was linked with the computaional aids for the hydrogen flammability

Optimization of the Severe Accident Management Strategy for Domestic Plants and Validation Experiments

Energy Technology Data Exchange (ETDEWEB)

Kim, S. B.; Kim, H. D.; Koo, K. M.; Park, R. J.; Hong, S. H.; Cho, Y. R.; Kim, J. T.; Ha, K. S.; Kang, K. H

2007-04-15

nuclear power plants, a technical basis report and computational aid tools were developed in parallel with the experimental and analytical works for the resolution of the uncertain safety issues. ELIAS experiments were carried out to quantify the boiling heat removal rate at the upper surface of a metallic layer for precise evaluations on the effect of a late in-vessel coolant injection. T-HERMES experiments were performed to examine the two-phase natural circulation phenomena through the gap between the reactor vessel and the insulator in the APR1400. Detailed analyses on the hydrogen control in the APR1400 containment were performed focused on the effect of spray system actuation on the hydrogen burning and the evaluation of the hydrogen behavior in the IRWST. To develop the technical basis report for the severe accident management, analyses using SCDAP/RELAP5 code were performed for the accident sequences of the OPR1000. Based on the experimental and analytical results performed in this study, the computational aids for the evaluations of hydrogen flammability in the containment, criteria of the in-vessel corium cooling, criteria of the external reactor vessel cooling were developed. An ASSA code was developed to validate the signal from the instrumentations during the severe accidents and to process the abnormal signal. Since ASSA can perform the signal processing from the direct input of the nuclear power plant during the severe accident, it can be platform of the computational aids. In this study, the ASSA was linked with the computaional aids for the hydrogen flammability.

NPP Krsko Severe Accident Management Guidelines Implementation

International Nuclear Information System (INIS)

Basic, I.; Krajnc, B.; Bilic-Zabric, T.; Spiler, J.

2002-01-01

Severe Accident Management is a framework to identify and implement the Emergency Response Capabilities that can be used to prevent or mitigate severe accidents and their consequences. The USA NRC has indicated that the development of a licensee plant specific accident management program will be required in order to close out the severe accident regulatory issue (Ref. SECY-88-147). Generic Letter 88-20 ties the Accident management Program to IPE for each plant. The SECY-89-012 defines those actions taken during the course of an accident by the plant operating and technical staff to: 1) prevent core damage, 2) terminate the progress of core damage if it begins and retain the core within the reactor vessel, 3) maintain containment integrity as long as possible, and 4) minimize offsite releases. The subject of this paper is to document the severe accident management activities, which resulted in a plant specific Severe Accident Management Guidelines implementation. They have been developed based on the Krsko IPE (Individual Plant Examination) insights, Generic WOG SAMGs (Westinghouse Owners Group Severe Accident Management Guidances) and plant specific documents developed within this effort. Among the required plant specific actions the following are the most important ones: Identification and documentation of those Krsko plant specific severe accident management features (which also resulted from the IPE investigations). The development of the Krsko plant specific background documents (Severe Accident Plant Specific Strategies and SAMG Setpoint Calculation). Also, paper discusses effort done in the areas of NPP Krsko SAMG review (internal and external ), validation on Krsko Full Scope Simulator (Severe Accident sequences are simulated by MAAP4 in real time) and world 1st IAEA Review of Accident Management Programmes (RAMP). (author)

Chernobyl accident and Denmark

International Nuclear Information System (INIS)

1986-12-01

The report describes the Chernobyl accident and its consequences for Denmark in particular. It was commissioned by The Secretary of State for the Environment. Volume 2 contains copies of original documents issued by Danish authorities during the first accident phase and afterwards. Evaluations, monitoring data, press releases, legislation acts etc. are included. (author)

Chernobyl accident and Danmark

International Nuclear Information System (INIS)

1986-12-01

The report describes the Chernobyl accident and its consequences for Denmark in particular. It was commissioned by the Secretary of State for the Environment. Volume 1 contains copies of original documents issued by Danish authorities during the first accident phase and afterwards. Evaluations, monitoring data, press releases, legislation acts etc. are included. (author)

Lessons from the Fukushima nuclear power accident

International Nuclear Information System (INIS)

Hatamura, Yotaro

2013-01-01

Through the investigation of the Fukushima Nuclear Power Accident as the chairman of the related Government's Committee, many things had been considered. Essence of the accident could be not only what occurred in the Fukushima nuclear power station, but also dispersed radioactive materials forced many residents to move and not to be returned. Such events as indication errors of water level meter occurring in severe accident could no be thought and remote mechanical operation of valves under high radiation environment were not prepared. Contamination by radioactive clouds caused the evacuation of residents for a long period. Lessons learned from the accident were described such as; (1) the verification of the road to failure connecting selected accident sequence and road to success with another supposed choice, (2) considering what might occur and then what should be needed on the contrary, (3) nuclear power, if should be continued, should be used with the premise of its hazards, and (4) advise to nuclear engineer for adequate information dissemination and technical explanation to the public and keeping nuclear technologies alive. (T. Tanaka)

Complementary safety evaluation of the Phenix power station (INB n 71) in the light of the Fukushima power station accident

International Nuclear Information System (INIS)

2011-01-01

This report proposes a complementary safety evaluation of the Phenix power station, one of the French basic nuclear installations (BNI, in French INB) in the light of the Fukushima accident. This evaluation takes the following risks into account: risks of flooding, earthquake, loss of power supply and loss of cooling, in addition to operational management of accident situations. It presents some characteristics of the Phenix installation (location, operator, industrial environment, installation characteristics), identifies the risks of cliff effect and the main structures and equipment, evaluates the seismic risk (installation sizing, installation conformity, margin evaluation), evaluates the flooding risk (installation sizing, installation conformity, margin evaluation), briefly examines other extreme natural phenomena (extreme meteorological conditions related to flooding, earthquake or flooding with a higher level than that for which the installation is designed). It analyzes the risk of a loss of power supply and of cooling (loss of external and internal electric sources, loss of the ultimate cooling system). It analyzes the management of severe accidents: crisis management organization, available intervention means, robustness of available means. It discusses the conditions of the use of subcontractors

Extra-regulatory accident safety evaluation for the PWR S/F transport and storage system

International Nuclear Information System (INIS)

Seo, K. S.; Lee, J. C.; Bang, K. S.; Choi, W. S.; Lee, S. H.; Seo, J. S.; Kim, K. Y.; Jeon, J. E.

2011-06-01

In the field of high speed crash, high speed impact analyses and test were performed for two systems, the dual purpose metal cask and the concrete cask considering the aircraft crash condition. Through the tests, the procedure and methodology of the assessment were successfully validated. In the field of transient fire, the computer simulation method for transient fire was drawn through the overseas status and methodology analysis. In the field of cumulative damage evaluation for transport accident, the analysis technique for assessment for cumulative damages which occurred from successive accident conditions was developed and proposed. And the sequential tests for the dual purpose cask were performed

Evaluation of downmotion time interval molten materials to core catcher during core disruptive accidents postulated in LMFR

International Nuclear Information System (INIS)

Voronov, S.A.; Kiryushin, A.I.; Kuzavkov, N.G.; Vlasichev, G.N.

1994-01-01

Hypothetical core disruptive accidents are postulated to clear potential of a reactor plant to withstand extreme conditions and to generate measures for management and mitigation of accidents consequence. In Russian advanced reactors there is a core catcher below the diagrid to prevent vessel bottom melting and to localize fuel debris. In this paper the calculation technique and estimation of relocation time of molten fuel and materials are presented in the case of core disruptive accidents postulated for LMFR reactor. To evaluate minimum interval of fuel relocation time the calculations for different initial data are provided. Large mass of materials between the core and the catcher in LMFR reactor hinders molten materials relocation toward the vessel bottom. That condition increases the time interval of reaching core catcher by molten fuel. Computations performed allowed to evaluate the minimum molten materials relocation time from the core to the core catcher. This time interval is in a range of 3.5-5.5 hours. (author)

Evaluation of potential severe accidents during low power and shutdown operations at Grand Gulf, Unit 1: Evaluation of severe accident risks for plant operational state 5 during a refueling outage. Main report and appendices, Volume 6, Part 1

International Nuclear Information System (INIS)

Brown, T.D.; Kmetyk, L.N.; Whitehead, D.; Miller, L.; Forester, J.; Johnson, J.

1995-03-01

Traditionally, probabilistic risk assessments (PRAS) of severe accidents in nuclear power plants have considered initiating events potentially occurring only during full power operation. Recent studies and operational experience have, however, implied that accidents during low power and shutdown could be significant contributors to risk. In response to this concern, in 1989 the Nuclear Regulatory Commission (NRC) initiated an extensive program to carefully examine the potential risks during low power and shutdown operations. Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the plants to be studied. The program consists of two parallel projects being performed by Brookhaven National Laboratory (Surry) and Sandia National Laboratories (Grand Gulf). The program objectives include assessing the risks of severe accidents initiated during plant operational states other than full power operation and comparing the estimated risks with the risk associated with accidents initiated during full power operation as assessed in NUREG-1150. The scope of the program is that of a Level-3 PRA. The subject of this report is the PRA of the Grand Gulf Nuclear Station, Unit 1. The Grand Gulf plant utilizes a 3833 MWt BUR-6 boiling water reactor housed in a Mark III containment. The Grand Gulf plant is located near Port Gibson, Mississippi. The regime of shutdown analyzed in this study was plant operational state (POS) 5 during a refueling outage, which is approximately Cold Shutdown as defined by Grand Gulf Technical Specifications. The entire PRA of POS 5 is documented in a multi-volume NUREG report (NUREG/CR-6143). The internal events accident sequence analysis (Level 1) is documented in Volume 2. The Level 1 internal fire and internal flood analyses are documented in Vols 3 and 4, respectively

Evaluation of potential severe accidents during low power and shutdown operations at Grand Gulf, Unit 1: Evaluation of severe accident risks for plant operational state 5 during a refueling outage. Main report and appendices, Volume 6, Part 1

Energy Technology Data Exchange (ETDEWEB)

Brown, T.D.; Kmetyk, L.N.; Whitehead, D.; Miller, L. [Sandia National Labs., Albuquerque, NM (United States); Forester, J. [Science Applications International Corp., Albuquerque, NM (United States); Johnson, J. [GRAM, Inc., Albuquerque, NM (United States)

1995-03-01

Traditionally, probabilistic risk assessments (PRAS) of severe accidents in nuclear power plants have considered initiating events potentially occurring only during full power operation. Recent studies and operational experience have, however, implied that accidents during low power and shutdown could be significant contributors to risk. In response to this concern, in 1989 the Nuclear Regulatory Commission (NRC) initiated an extensive program to carefully examine the potential risks during low power and shutdown operations. Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the plants to be studied. The program consists of two parallel projects being performed by Brookhaven National Laboratory (Surry) and Sandia National Laboratories (Grand Gulf). The program objectives include assessing the risks of severe accidents initiated during plant operational states other than full power operation and comparing the estimated risks with the risk associated with accidents initiated during full power operation as assessed in NUREG-1150. The scope of the program is that of a Level-3 PRA. The subject of this report is the PRA of the Grand Gulf Nuclear Station, Unit 1. The Grand Gulf plant utilizes a 3833 MWt BUR-6 boiling water reactor housed in a Mark III containment. The Grand Gulf plant is located near Port Gibson, Mississippi. The regime of shutdown analyzed in this study was plant operational state (POS) 5 during a refueling outage, which is approximately Cold Shutdown as defined by Grand Gulf Technical Specifications. The entire PRA of POS 5 is documented in a multi-volume NUREG report (NUREG/CR-6143). The internal events accident sequence analysis (Level 1) is documented in Volume 2. The Level 1 internal fire and internal flood analyses are documented in Vols 3 and 4, respectively.

Accidents - Chernobyl accident

International Nuclear Information System (INIS)

2004-01-01

This file is devoted to the Chernobyl accident. It is divided in four parts. The first part concerns the accident itself and its technical management. The second part is relative to the radiation doses and the different contaminations. The third part reports the sanitary effects, the determinists ones and the stochastic ones. The fourth and last part relates the consequences for the other European countries with the case of France. Through the different parts a point is tackled with the measures taken after the accident by the other countries to manage an accident, the cooperation between the different countries and the groups of research and studies about the reactors safety, and also with the international medical cooperation, specially for the children, everything in relation with the Chernobyl accident. (N.C.)

Accidents at nuclear power plants

International Nuclear Information System (INIS)

Anon.

1979-01-01

The accidents which accurred at Wuergassen, Browns Ferry and Three Mile Island are each briefly described and discussed. The last is naturally treated in much more detail than the first two. Damage to the fuel elements is briefly considered and the release of fission products, radiation doses to the population and their expected consequences are discussed. The accidents are evaluated and related to risk evaluations, especially in WASH-1400. (JIW)

Reactor accidents of four decades

International Nuclear Information System (INIS)

Szabo, Z.

1982-11-01

The report covers the period between 1942 and June 30, 1982. A detailed description and a comparative analysis of reactor accidents and chemical-processing-plant excursions are presented. The analysis takes into account the following points: causes (design, maintenance, operation); events (initiating event and sequence of events); consequences (environmental impacts, personnel effects and equipment damages). (author)

An application of probabilistic safety assessment methods to model aircraft systems and accidents

Energy Technology Data Exchange (ETDEWEB)

Martinez-Guridi, G.; Hall, R.E.; Fullwood, R.R.

1998-08-01

A case study modeling the thrust reverser system (TRS) in the context of the fatal accident of a Boeing 767 is presented to illustrate the application of Probabilistic Safety Assessment methods. A simplified risk model consisting of an event tree with supporting fault trees was developed to represent the progression of the accident, taking into account the interaction between the TRS and the operating crew during the accident, and the findings of the accident investigation. A feasible sequence of events leading to the fatal accident was identified. Several insights about the TRS and the accident were obtained by applying PSA methods. Changes proposed for the TRS also are discussed.

Analysis of effects of calandria tube uncovery under severe accident conditions in CANDU reactors

International Nuclear Information System (INIS)

Rogers, J.T.; Currie, T.C.; Atkinson, J.C.; Dick, R.

1983-01-01

A study is being undertaken for the Atomic Energy Control Board to assess the thermal and hydraulic behaviour of CANDU reactor cores under accident conditions more severe than those normally considered in the licensing process. In this paper, we consider the effects on a coolant channel of the uncovery of a calandria tube by moderator boil-off following a LOCA in a Bruce reactor unit in which emergency cooling is ineffective and the moderator heat sink is impaired by the failure of the moderator cooling system. Calandria tube uncovery and its immediate consequences, as described here, constitute only one part of the entire accident sequence. Other aspects of this sequence as well as results of the analysis of the other accident sequences studied will be described in the final report on the project and in later papers

MELCOR Severe Accident Analysis on the SMART Reactor

International Nuclear Information System (INIS)

Kim, Tae Woon; Jin, Young Ho; Kim, Young In; Kim, Keung Koo; Wang, Ziao; Revankar, Shripad

2014-01-01

A severe accident is analyzed for Korea SMR reactor, SMART. Core melt down sequences are analyzed for SMART reactor core using MELCOR version 1.8.5. MELCOR is developed by Sandia National Laboratory for US NRC for the simulation of severe accidents in nuclear power plants. Two cases are simulated here and compared between them; one is the case for core having 3 concentric rings and the other is the case for core having 5 concentric rings. One inch break LOCA scenario is simulated and compared between these two core models. Time sequences for the thermal hydraulic behaviors of RPV and thermal heatup behaviors of reactor core are explained in graphically. Thermal hydraulic behavior such as the change of pressure, level, mass, and temperature of RPV is explained. Thermal heatup behavior of reactor core such as oxidation of cladding, hydrogen generation, core slumping down to lower plenum, and finally creep rupture of PRV lower head is explained. Engineered safety features such as safety injection systems (SIS), and Passive residual heat removal systems (PHRS), etc. are assumed to be not working. One inch break of severe accident is simulated on Korean SMR (SMART) Integral PWR with MELCOR code version 1.8.5. Core melt progression and lower head failure time is very slow compared to other commercial reactors. Simulation on 3 and 5 radial rings core models gives very similar pattern in core cell failure timings. Other various accident scenarios (for example, SBO in Fukushima) will be tried further. Containment behaviors and source term behaviors in severe accident conditions will be analyzed in future

Development of instrumentation systems for severe accidents. 4. New accident tolerant in-containment pressure transducer for containment pressure monitoring system

International Nuclear Information System (INIS)

Oba, Masato; Teruya, Kuniyuki; Yoshitsugu, Makoto; Ikeuchi, Takeshi

2015-01-01

The accident at Tokyo Electric Power Company's Fukushima Dai-ichi Nuclear Power Plant (TF-1 accident) caused severe situations and resulted in a difficulty in measuring important parameters for monitoring plant conditions. Therefore, we have studied the TF-1 accident to select the important parameters that should be monitored at the severe accident and are developing the Severe Accident Instrumentations and Monitoring Systems that could measure the parameters in severe accident conditions. Mitsubishi Heavy Industries, LTD (MHI) developed a new accident tolerant containment pressure monitoring system and demonstrated that the monitoring system could endure extremely harsh environmental conditions that envelop severe accident environmental conditions inside a containment such as maximum operating temperature of up to 300degC and total integrated dose (TID) of 1 MGy gamma. The new containment pressure monitoring system comprises of a strain gage type pressure transducer and a mineral insulated (MI) cable with ceramic connectors, which are located in the containment, and a strain measuring amplifier located outside the containment. Less thermal and radiation degradation is achieved because of minimizing use of organic materials for in-containment equipment such as the transducer and connectors. Several tests were performed to demonstrate the performance and capability of the in-containment equipment under severe accident environmental conditions and the major steps in this testing were run in the following test sequences: (1) the baseline functional tests (e.g., repeatability, non-linearity, hysteresis, and so on) under normal conditions, (2) accident radiation testing, (3) seismic testing, and (4) steam/temperature test exposed to simulated severe accident environmental conditions. The test results demonstrate that the new pressure transducer can endure the simulated severe accident conditions. (author)

Lessons learned and evaluation of the impact from the Chernobyl accident

International Nuclear Information System (INIS)

Cigna, A.

1990-07-01

The impact on society of the Chernobyl accident is assessed. The situation prior to Chernobyl with respect to regulations of radiation protection against the consequences of a major accident is considered. The development of the recommendations and regulations issued by the CEC for the Maximum Permitted Levels of different reactions to the accident are examined and some data on the average individual effective dose equivalents estimated in a number of countries are reported. Finally some main problems concerning the information of the public and the preparedness for possible future accidents are also summarized. (author)

Lessons learned and evaluation of the impact from the Chernobyl accident

Energy Technology Data Exchange (ETDEWEB)

Cigna, A [ENEA - Area Energia, Ambiente e Salute, Centro Ricerche Energia, Saluggia, Vercelli (Italy)

1990-07-15

The impact on society of the Chernobyl accident is assessed. The situation prior to Chernobyl with respect to regulations of radiation protection against the consequences of a major accident is considered. The development of the recommendations and regulations issued by the CEC for the Maximum Permitted Levels of different reactions to the accident are examined and some data on the average individual effective dose equivalents estimated in a number of countries are reported. Finally some main problems concerning the information of the public and the preparedness for possible future accidents are also summarized. (author)

Improvement of dose evaluation method for employees at severe accident

International Nuclear Information System (INIS)

Onda, Takashi; Yoshida, Yoshitaka; Kudo, Seiichi; Nishimura, Kazuya

2003-01-01

It is expected that the selection of access routes for employees who engage in emergency work at a severe accident in a nuclear power plant makes a difference in their radiation dose values. In order to examine how much difference arises in the dose by the selection of the access routes, in the case of a severe accident in a pressurized water reactor plant, we improved the method to obtain the dose for employees and expanded the analyzing system. By the expansion of the system and the improvement of the method, we have realized the followings: (1) in the whole plant area, the dose evaluation is possible, (2) the efficiency of calculation is increased by the reduction of the number of radiation sources, etc, and (3) the function is improved by introduction of the sky shine calculation into the highest floor, etc. The improved system clarifies the followings: (1) the doses change by selected access routes, and this system can give the difference in the doses quantitatively, and (2) in order to suppress the dose, it is effective to choose the most adequate access route for the employees. (author)

Core fusion accidents in nuclear power reactors. Knowledge review

International Nuclear Information System (INIS)

Bentaib, Ahmed; Bonneville, Herve; Clement, Bernard; Cranga, Michel; Fichot, Florian; Koundy, Vincent; Meignen, Renaud; Corenwinder, Francois; Leteinturier, Denis; Monroig, Frederique; Nahas, Georges; Pichereau, Frederique; Van-Dorsselaere, Jean-Pierre; Cenerino, Gerard; Jacquemain, Didier; Raimond, Emmanuel; Ducros, Gerard; Journeau, Christophe; Magallon, Daniel; Seiler, Jean-Marie; Tourniaire, Bruno

2013-01-01

This reference document proposes a large and detailed review of severe core fusion accidents occurring in nuclear power reactors. It aims at presenting the scientific aspects of these accidents, a review of knowledge and research perspectives on this issue. After having recalled design and operation principles and safety principles for reactors operating in France, and the main studied and envisaged accident scenarios for the management of severe accidents in French PWRs, the authors describe the physical phenomena occurring during a core fusion accident, in the reactor vessel and in the containment building, their sequence and means to mitigate their effects: development of the accident within the reactor vessel, phenomena able to result in an early failure of the containment building, phenomena able to result in a delayed failure with the corium-concrete interaction, corium retention and cooling in and out of the vessel, release of fission products. They address the behaviour of containment buildings during such an accident (sizing situations, mechanical behaviour, bypasses). They review and discuss lessons learned from accidents (Three Mile Island and Chernobyl) and simulation tests (Phebus-PF). A last chapter gives an overview of software and approaches for the numerical simulation of a core fusion accident

Analysis of unmitigated large break loss of coolant accidents using MELCOR code

Science.gov (United States)

Pescarini, M.; Mascari, F.; Mostacci, D.; De Rosa, F.; Lombardo, C.; Giannetti, F.

2017-11-01

In the framework of severe accident research activity developed by ENEA, a MELCOR nodalization of a generic Pressurized Water Reactor of 900 MWe has been developed. The aim of this paper is to present the analysis of MELCOR code calculations concerning two independent unmitigated large break loss of coolant accident transients, occurring in the cited type of reactor. In particular, the analysis and comparison between the transients initiated by an unmitigated double-ended cold leg rupture and an unmitigated double-ended hot leg rupture in the loop 1 of the primary cooling system is presented herein. This activity has been performed focusing specifically on the in-vessel phenomenology that characterizes this kind of accidents. The analysis of the thermal-hydraulic transient phenomena and the core degradation phenomena is therefore here presented. The analysis of the calculated data shows the capability of the code to reproduce the phenomena typical of these transients and permits their phenomenological study. A first sequence of main events is here presented and shows that the cold leg break transient results faster than the hot leg break transient because of the position of the break. Further analyses are in progress to quantitatively assess the results of the code nodalization for accident management strategy definition and fission product source term evaluation.

Accident precursors, near misses, and warning signs: Critical review and formal definitions within the framework of Discrete Event Systems

International Nuclear Information System (INIS)

Saleh, Joseph H.; Saltmarsh, Elizabeth A.; Favarò, Francesca M.; Brevault, Loïc

2013-01-01

An important consideration in safety analysis and accident prevention is the identification of and response to accident precursors. These off-nominal events are opportunities to recognize potential accident pathogens, identify overlooked accident sequences, and make technical and organizational decisions to address them before further escalation can occur. When handled properly, the identification of precursors provides an opportunity to interrupt an accident sequence from unfolding; when ignored or missed, precursors may only provide tragic proof after the fact that an accident was preventable. In this work, we first provide a critical review of the concept of precursor, and we highlight important features that ought to be distinguished whenever accident precursors are discussed. We address for example the notion of ex-ante and ex-post precursors, identified for postulated and instantiated (occurred) accident sequences respectively, and we discuss the feature of transferability of precursors. We then develop a formal (mathematical) definition of accident precursors as truncated accident sequences within the modeling framework of Discrete Event Systems. Additionally, we examine the related notions of “accident pathogens” as static or lurking adverse conditions that can contribute to or aggravate an accident, as well as “near misses”, “warning signs” and the novel concept of “accident pathway”. While these terms are within the same linguistic neighborhood as “accident precursors”, we argue that there are subtle but important differences between them and recommend that they not be used interchangeably for the sake of accuracy and clarity of communication within the risk and safety community. We also propose venues for developing quantitative importance measures for accident precursors, similar to component importance measures in reliability engineering. Our objective is to establish a common understanding and clear delineation of these terms, and

Cost per severe accident as an index for severe accident consequence assessment and its applications

International Nuclear Information System (INIS)

Silva, Kampanart; Ishiwatari, Yuki; Takahara, Shogo

2014-01-01

The Fukushima Accident emphasizes the need to integrate the assessments of health effects, economic impacts, social impacts and environmental impacts, in order to perform a comprehensive consequence assessment of severe accidents in nuclear power plants. “Cost per severe accident” is introduced as an index for that purpose. The calculation methodology, including the consequence analysis using level 3 probabilistic risk assessment code OSCAAR and the calculation method of the cost per severe accident, is proposed. This methodology was applied to a virtual 1,100 MWe boiling water reactor. The breakdown of the cost per severe accident was provided. The radiation effect cost, the relocation cost and the decontamination cost were the three largest components. Sensitivity analyses were carried out, and parameters sensitive to cost per severe accident were specified. The cost per severe accident was compared with the amount of source terms, to demonstrate the performance of the cost per severe accident as an index to evaluate severe accident consequences. The ways to use the cost per severe accident for optimization of radiation protection countermeasures and for estimation of the effects of accident management strategies are discussed as its applications. - Highlights: • Cost per severe accident is used for severe accident consequence assessment. • Assessments of health, economic, social and environmental impacts are included. • Radiation effect, relocation and decontamination costs are important cost components. • Cost per severe accident can be used to optimize radiation protection measures. • Effects of accident management can be estimated using the cost per severe accident

Development of accident sequence precursors methodologies for core damage Probabilities in NPPs

International Nuclear Information System (INIS)

Munoz, R.; Minguez, E.; Melendez, E.; Sanchez-Perea, M.; Izquierdo, J.M.

1998-01-01

Several licensing programs have focused on the evaluation of the importance of operating events occurred in NPPs. Some have worked the dynamic aspects of the sequence of events involved, reproducing the incidents, while others are based on PSA applications to incident analysis. A method that controls the two above approaches to determine risk analysis derives from the Integrated Safety Assessment methodology (ISA). The dynamics of the event is followed by transient simulation in tree form, building a Setpoint or Deterministic Dynamic Event Tree (DDET). When a setpoint is reached, the actuation of a protection is triggered, then the tree is opened in branches corresponding to different functioning states. The engineering simulator with the new states followers each branch. One of these states is the nominal one, which is the PSA is associated to the success criterion of the system. The probability of the sequence is calculated in parallel to the dynamics. The following tools should perform the couple simulation: 1. A Scheduler that drives the simulation of the different sequences, and open branches upon demand. It will be the unique generator of processes while constructing the tree calculation, and will develop the computation in a distributed computational environment. 2. The Plant Simulator, which models the plant systems and the operator actions throughout a sequence. It receives the state of the equipment in each sequence and must provide information about setpoint crossing to the Scheduler. It will receive decision flags to continue or to stop each sequence, and to send new conditions to other plant simulators. 3. The Probability Calculator, linked only to the Scheduler, is the fault trees associated with each event tree header and performing their Boolean product. (Author)

Radiological consequence analyses of loss of coolant accidents of various break sizes of Pressurized Heavy Water Reactor

International Nuclear Information System (INIS)

Sanyasi Rao, V.V.S.; Hari Prasad, M.; Ghosh, A.K.

2010-01-01

For any advanced technology, it is essential to ensure that the consequences associated with the accident sequences arising, if any, from the operation of the plant are as low as possible and certainly below the guidelines/limits set by the regulatory bodies. Nuclear power is no exception to this. In this paper consequences of the events arising from Loss of Coolant Accident (LOCA) sequences in Pressurized Heavy Water Reactor (PHWR), are analysed. The sequences correspond to different break sizes of LOCA followed by the operation or otherwise of Emergency Core Cooling System (ECCS). Operation or otherwise of the containment safety systems has also been considered. It has been found that there are no releases to the environment when ECCS is available. The releases, when ECCS is not available, arise from the slack and the ground. The radionuclides considered include noble gases, iodine, and cesium. The hourly meteorological parameters (wind speed, wind direction, precipitation and stability category), considered for this study, correspond to those of Kakrapar site. The consequences evaluated are the thyroid dose and the bone marrow dose received by a person located at various distances from the release point. Isodose curves are generated. From these evaluations, it has been found that the doses are very low. The complementary cumulative frequency distributions (CCFD) for thyroid and bone marrow doses have also been presented for the cases analysed. (author)

European approach for a perennial storage of severe accident research experimental data as resulting from EU projects like SARNET, Phebus FP and ISTP

International Nuclear Information System (INIS)

Zeyen, R.; Barboni, M.

2010-01-01

In the fleet of European nuclear power plants, with a very low probability circumstances, severe accident sequences may result in core melting and plant damage leading to dispersal of radioactive material into the environment and thus constituting a health hazard to the public well beyond the borders of the State where the damaged plant is located. It is therefore crucial that the best state of knowledge on severe accident phenomenology, qualified computer tools and appropriate methodology should be used uniformly throughout Europe, in order to evaluate the corresponding risks and update former evaluations, taking into account notably the inevitable evolutions in reactor operations. (authors)

Socioeconomic consequences of nuclear reactor accidents

International Nuclear Information System (INIS)

Tawil, J.J.; Callaway, J.W.; Coles, B.L.; Cronin, F.J.; Currie, J.W.; Imhoff, K.L.; Lewis, P.M.; Nesse, R.J.; Strenge, D.L.

1984-06-01

This report identifies and characterizes the off-site socioeconomic consequences that would likely result from a severe radiological accident at a nuclear power plant. The types of impacts that are addressed include economic impacts, health impacts, social/psychological impacts and institutional impacts. These impacts are identified for each of several phases of a reactor accident - from the warning phase through the post-resettlement phase. The relative importance of the impact during each accident phase and the degree to which the impact can be predicted are indicated. The report also examines the methods that are currently used for assessing nuclear reactor accidents, including development of accident scenarios and the estimating of socioeconomic accident consequences with various models. Finally, a critical evaluation is made regarding the use of impact analyses in estimating the contribution of socioeconomic consequences to nuclear accident reactor accident risk. 116 references, 7 figures, 15 tables

Accident and emergency management

International Nuclear Information System (INIS)

Andersen, V.; Moellenbach, K.; Heinonen, R.; Jakobsson, S.; Kukko, T.; Berg, Oe.; Larsen, J.S.; Westgaard, T.; Magnusson, B.; Andersson, H.; Holmstroem, C.; Brehmer, B.; Allard, R.

1988-06-01

There is an increasing potential for severe accidents as the industrial development tends towards large, centralised production units. In several industries this has led to the formation of large organisations which are prepared for accidents fighting and for emergency management. The functioning of these organisations critically depends upon efficient decision making and exchange of information. This project is aimed at securing and possibly improving the functionality and efficiency of the accident and emergency management by verifying, demonstrating, and validating the possible use of advanced information technology in the organisations mentioned above. With the nuclear industry in focus the project consists of five main activities: 1) The study and detailed analysis of accident and emergency scenarios based on records from incidents and rills in nuclear installations. 2) Development of a conceptual understanding of accident and emergency management with emphasis on distributed decision making, information flow, and control structure sthat are involved. 3) Development of a general experimental methodology for evaluating the effects of different kinds of decision aids and forms of organisation for emergency management systems with distributed decision making. 4) Development and test of a prototype system for a limited part of an accident and emergency organisation to demonstrate the potential use of computer and communication systems, data-base and knowledge base technology, and applications of expert systems and methods used in artificial intelligence. 5) Production of guidelines for the introduction of advanced information technology in the organisations based on evaluation and validation of the prototype system. (author)

Vaporization of structural materials in severe accidents

International Nuclear Information System (INIS)

Lorenz, R.A.

1982-01-01

Vaporized structural materials form the bulk of aerosol particles that can transport fission products in severe LWR accidents. As part of the Severe Accident Sequence Analysis (SASA) program at Oak Ridge National Laboratory, a model has been developed based on a mass transport coefficient to describe the transport of materials from the surface of a molten pool. In many accident scenarios, the coefficient can be calculated from existing correlations for mass transfer by natural convection. Data from SASCHA fuel melting tests (Karlsruhe, Germany) show that the partial pressures of many of the melt components (Fe, Cr, Co, Mn, Sn) required for the model can be calculated from the vapor pressures of the pure species and Raoult's law. These calculations indicate much lower aerosol concentrations than reported in previous studies

Severe accidents and terrorist threats at nuclear reactors

International Nuclear Information System (INIS)

Pollack, G.L.

1987-01-01

Some of the key areas of uncertainty are the nature of the physical and chemical interactions of released fission products and of the interactions between a molten core and concrete, the completeness and validity of the computer codes used to predict accidents, and the behavior of the containment. Because of these and other uncertainties, it is not yet possible to reliably predict the consequences of reactor accidents. It is known that for many accident scenarios, especially less severe ones or where the containment is not seriously compromised, the amount of radioactive material expected to escape the reactor is less, even much less, than was previously calculated. For such accidents, the predictions are easier and more reliable. With severe accidents, however, there is considerable uncertainty as to the predicted results. For accidents of the type that terrorists might cause - for example, where the sequence of failure would be unexpected or where redundant safety features are caused to fail together - the uncertainties are still larger. The conclusion, then, is that there are potential dangers to the public from terrorist actions at a nuclear reactor; however, because of the variety of potential terrorist threats and the incompleteness of the knowledge about the behavior of reactor components and fission products during accidents, the consequences cannot yet be assessed quantitatively

A new approach to incorporate operator actions in the simulation of accident sequences

International Nuclear Information System (INIS)

Antonio Exposito; Juan Antonio Quiroga; Javier Hortal; John-Einar Hulsund

2006-01-01

Full text of publication follows: Nowadays, simulation-based human reliability analysis (HRA) methods seem to provide a new direction for the development of advanced methodologies to study operator actions effect during accident sequences. Due to this, the Spanish Nuclear Safety Council (CSN) started a working group which has, among other objectives, to develop such simulation-based HRA methodology. As a result of its activities, a new methodology, named Integrated Safety Assessment (ISA), has been developed and is currently being incorporated into licensing activities at CSN. One of the key aspects of this approach is the incorporation of the capability to simulate operator actions, expanding the ISA methodology scopes to make HRA studies. For this reason, CSN is involved in several activities oriented to develop a new tool, which must be able to incorporate operator actions in conventional thermohydraulic (TH) simulations. One of them is the collaboration project between CSN, Halden Reactor Project (HRP) and the Department of Energy Systems (DSE) of the Polytechnic University of Madrid that started in 2003. The basic aim of the project is to develop a software tool that consists of a closed-loop plant/operator simulator, a thermal hydraulic (TH) code for simulating the plant transient and the procedures processor to give the information related with operator actions to the TH code, both coupled by a data communication system which allows the information exchange. For the plant simulation we have a plant transient simulator code (TRETA/TIZONA for PWR/BWR NPPs respectively), developed by the CSN, with PWR/BWR full scope models. The functionality of these thermalhydraulic codes has been expanded, allowing control the overall information flow between coupled codes, simulating the TH transient and determining when the operator actions must be considered. In the other hand, we have the COPMA-III code, a computerized procedure system able to manage XML operational

United States position on severe accidents

International Nuclear Information System (INIS)

Ross, D.F.

1988-01-01

The United States policy on severe accidents was published in 1985 for both new plant applications and for existing plants. Implementation of this policy is in progress. This policy, aided by a related safety goal policy and by analysis capabilities emerging from improved understanding of accident phenomenology, is viewed as a logical development from the pioneering work in the WASH-1400 Reactor Safety Study published by the United States Nuclear Regulatory Commission (NRC) in 1975. This work provided an estimate of the probability and consequences of severe accidents which, prior to that time, had been mostly evaluated by somewhat arbitrary assumptions dating back 30 years. The early history of severe accident evaluation is briefly summarized for the period 1957-1979. Then, the galvanizing action of Three Mile Island Unit 2 (TMI-2) on severe accident analysis, experimentation and regulation is reviewed. Expressions of US policy in the form of rulemaking, severe accident policy, safety research, safety goal policy and court decisions (on adequacy of safety) are discussed. Finally, the NRC policy as of March 1988 is stated, along with a prospective look at the next few years. (author). 19 refs

Analysis of Three Mile Island - Unit 2 accident

International Nuclear Information System (INIS)

1979-07-01

The Nuclear Safety Analysis Center (NSAC) of the Electric Power Research Institute is analyzing the Three Mile Island-2 accident. An early result of this analysis was a brief narrative summary, issued in mid May 1979. The present report contains a revised version of that narrative summary, a highly detailed sequence of events, a standard reference list, a list of abbreviations and acronyms, and several appendices. The appendices serve either to describe plant features which are pertinent to the understanding of the sequence of events, or indicate how certain inferences and conclusions in the report were reached. Supplementing the appendices contained herein, additional appendices are in preparation; these will be issued when available (e.g., the appendices Hydrogen Phenomena and Operator Actions during Initial Transient will follow later). Also in preparation is a matrix of equipment and systems actions during the accident. This report together with future supplements and a separate Core Damage Assessment report, will embody the principal results of that phase of NSAC work which is devoted to learning and understanding what happened during the accident. Subsequent phases will concentrate on causes, lessons learned and generic remedial or preventive measures which may be appropriate

Analysis of Three Mile Island-Unit 2 accident

International Nuclear Information System (INIS)

1979-07-01

The Nuclear Safety Analysis Center (NSAC) of the Electic Power Research Institute is analyzing the Three Mile Island-2 accident. An early result of this analysis was a brief narrative summary, issued in mid-May 1979. The present report contains a revised version of that narrative summary, a highly detailed sequence of events, a standard reference list, a list of abbreviations and acronyms, and several appendices. The appendices serve either to describe plant features which are pertinent to the understanding of the sequence of events, or indicate how certain inferences and conclusions in the report were reached. Supplementing the appendices contained herein, additional appendices are in preparation; these will be issued when available (e.g., the appendices Hydrogen Phenomena and Operator Actions duing Initial Transient will follow later). Also in preparation is a matrix of equipment and systems actions during the accident. This report together with future supplements and a separate Core Damage Assessment report, will embody the principal results of that phase of NSAC's work which is devoted to learning and understanding what happened during the accident. Subsequent phases will concentrate on causes, lessons learned and generic remedial or preventive measures which may be appropriate

Trismus: An unusual presentation following road accident

Directory of Open Access Journals (Sweden)

Thakur Jagdeep

2007-01-01

Full Text Available Trismus due to trauma usually follows road accidents leading to massive faciomaxillary injury. In the literature there is no report of a foreign body causing trismus following a road accident, this rare case is an exception. We present a case of isolated presentation of trismus following a road accident. This case report stresses on the thorough evaluation of patients presenting with trismus following a road accident.

Passive depressurization accident management strategy for boiling water reactors

International Nuclear Information System (INIS)

Liu, Maolong; Erkan, Nejdet; Ishiwatari, Yuki; Okamoto, Koji

2015-01-01

Highlights: • We proposed two passive depressurization systems for BWR severe accident management. • Sensitivity analysis of the passive depressurization systems with different leakage area. • Passive depressurization strategies can prevent direct containment heating. - Abstract: According to the current severe accident management guidance, operators are required to depressurize the reactor coolant system to prevent or mitigate the effects of direct containment heating using the safety/relief valves. During the course of a severe accident, the pressure boundary might fail prematurely, resulting in a rapid depressurization of the reactor cooling system before the startup of SRV operation. In this study, we demonstrated that a passive depressurization system could be used as a severe accident management tool under the severe accident conditions to depressurize the reactor coolant system and to prevent an additional devastating sequence of events and direct containment heating. The sensitivity analysis performed with SAMPSON code also demonstrated that the passive depressurization system with an optimized leakage area and failure condition is more efficient in managing a severe accident

Passive depressurization accident management strategy for boiling water reactors

Energy Technology Data Exchange (ETDEWEB)

Liu, Maolong, E-mail: liuml@vis.t.u-tokyo.ac.jp [Department of Nuclear Engineering and Management, School of Engineering, The University of Tokyo (Japan); Erkan, Nejdet [Nuclear Professional School, School of Engineering, The University of Tokyo (Japan); Ishiwatari, Yuki [Department of Nuclear Engineering and Management, School of Engineering, The University of Tokyo (Japan); Hitachi-GE Nuclear Energy, Ltd. (Japan); Okamoto, Koji [Nuclear Professional School, School of Engineering, The University of Tokyo (Japan)

2015-04-01

Highlights: • We proposed two passive depressurization systems for BWR severe accident management. • Sensitivity analysis of the passive depressurization systems with different leakage area. • Passive depressurization strategies can prevent direct containment heating. - Abstract: According to the current severe accident management guidance, operators are required to depressurize the reactor coolant system to prevent or mitigate the effects of direct containment heating using the safety/relief valves. During the course of a severe accident, the pressure boundary might fail prematurely, resulting in a rapid depressurization of the reactor cooling system before the startup of SRV operation. In this study, we demonstrated that a passive depressurization system could be used as a severe accident management tool under the severe accident conditions to depressurize the reactor coolant system and to prevent an additional devastating sequence of events and direct containment heating. The sensitivity analysis performed with SAMPSON code also demonstrated that the passive depressurization system with an optimized leakage area and failure condition is more efficient in managing a severe accident.

WHEN MODEL MEETS REALITY – A REVIEW OF SPAR LEVEL 2 MODEL AGAINST FUKUSHIMA ACCIDENT

Energy Technology Data Exchange (ETDEWEB)

Zhegang Ma

2013-09-01

The Standardized Plant Analysis Risk (SPAR) models are a set of probabilistic risk assessment (PRA) models used by the Nuclear Regulatory Commission (NRC) to evaluate the risk of operations at U.S. nuclear power plants and provide inputs to risk informed regulatory process. A small number of SPAR Level 2 models have been developed mostly for feasibility study purpose. They extend the Level 1 models to include containment systems, group plant damage states, and model containment phenomenology and accident progression in containment event trees. A severe earthquake and tsunami hit the eastern coast of Japan in March 2011 and caused significant damages on the reactors in Fukushima Daiichi site. Station blackout (SBO), core damage, containment damage, hydrogen explosion, and intensive radioactivity release, which have been previous analyzed and assumed as postulated accident progression in PRA models, now occurred with various degrees in the multi-units Fukushima Daiichi site. This paper reviews and compares a typical BWR SPAR Level 2 model with the “real” accident progressions and sequences occurred in Fukushima Daiichi Units 1, 2, and 3. It shows that the SPAR Level 2 model is a robust PRA model that could very reasonably describe the accident progression for a real and complicated nuclear accident in the world. On the other hand, the comparison shows that the SPAR model could be enhanced by incorporating some accident characteristics for better representation of severe accident progression.

Lessons learned and evaluation of the impact from the Chernobyl accident

International Nuclear Information System (INIS)

Cigna, A.A.

1990-01-01

The impact on society of the Chernobyl accidents is assessed. The situation prior to Chernobyl with respect to regulations of radiation protection against the consequences of a major accident is considered. The development of the recommendations and regulations issued by the Commission of the European Communities for the Maximum Permitted Levels of different groups of radionuclides in foodstuffs is reviewed. The different reactions to the accident are examined and some data on the average individual effective dose equivalents estimated in a number of countries are also reported. Finally some main problems concerning the information of the public and the preparedness for possible future accidents are also summarized

Application of forensic image analysis in accident investigations.

Science.gov (United States)

Verolme, Ellen; Mieremet, Arjan

2017-09-01

Forensic investigations are primarily meant to obtain objective answers that can be used for criminal prosecution. Accident analyses are usually performed to learn from incidents and to prevent similar events from occurring in the future. Although the primary goal may be different, the steps in which information is gathered, interpreted and weighed are similar in both types of investigations, implying that forensic techniques can be of use in accident investigations as well. The use in accident investigations usually means that more information can be obtained from the available information than when used in criminal investigations, since the latter require a higher evidence level. In this paper, we demonstrate the applicability of forensic techniques for accident investigations by presenting a number of cases from one specific field of expertise: image analysis. With the rapid spread of digital devices and new media, a wealth of image material and other digital information has become available for accident investigators. We show that much information can be distilled from footage by using forensic image analysis techniques. These applications show that image analysis provides information that is crucial for obtaining the sequence of events and the two- and three-dimensional geometry of an accident. Since accident investigation focuses primarily on learning from accidents and prevention of future accidents, and less on the blame that is crucial for criminal investigations, the field of application of these forensic tools may be broader than would be the case in purely legal sense. This is an important notion for future accident investigations. Copyright © 2017 Elsevier B.V. All rights reserved.

Construction of a technique plan repository and evaluation system based on AHP group decision-making for emergency treatment and disposal in chemical pollution accidents

International Nuclear Information System (INIS)

Shi, Shenggang; Cao, Jingcan; Feng, Li; Liang, Wenyan; Zhang, Liqiu

2014-01-01

Highlights: • Different chemical pollution accidents were simplified using the event tree analysis. • Emergency disposal technique plan repository of chemicals accidents was constructed. • The technique evaluation index system of chemicals accidents disposal was developed. • A combination of group decision and analytical hierarchy process (AHP) was employed. • Group decision introducing similarity and diversity factor was used for data analysis. - Abstract: The environmental pollution resulting from chemical accidents has caused increasingly serious concerns. Therefore, it is very important to be able to determine in advance the appropriate emergency treatment and disposal technology for different types of chemical accidents. However, the formulation of an emergency plan for chemical pollution accidents is considerably difficult due to the substantial uncertainty and complexity of such accidents. This paper explains how the event tree method was used to create 54 different scenarios for chemical pollution accidents, based on the polluted medium, dangerous characteristics and properties of chemicals involved. For each type of chemical accident, feasible emergency treatment and disposal technology schemes were established, considering the areas of pollution source control, pollutant non-proliferation, contaminant elimination and waste disposal. Meanwhile, in order to obtain the optimum emergency disposal technology schemes as soon as the chemical pollution accident occurs from the plan repository, the technique evaluation index system was developed based on group decision-improved analytical hierarchy process (AHP), and has been tested by using a sudden aniline pollution accident that occurred in a river in December 2012

Construction of a technique plan repository and evaluation system based on AHP group decision-making for emergency treatment and disposal in chemical pollution accidents

Energy Technology Data Exchange (ETDEWEB)

Shi, Shenggang [College of Environmental Science and Engineering, Beijing Forestry University, Beijing 100083 (China); College of Chemistry, Baotou Teachers’ College, Baotou 014030 (China); Cao, Jingcan; Feng, Li; Liang, Wenyan [College of Environmental Science and Engineering, Beijing Forestry University, Beijing 100083 (China); Zhang, Liqiu, E-mail: zhangliqiu@163.com [College of Environmental Science and Engineering, Beijing Forestry University, Beijing 100083 (China)

2014-07-15

Highlights: • Different chemical pollution accidents were simplified using the event tree analysis. • Emergency disposal technique plan repository of chemicals accidents was constructed. • The technique evaluation index system of chemicals accidents disposal was developed. • A combination of group decision and analytical hierarchy process (AHP) was employed. • Group decision introducing similarity and diversity factor was used for data analysis. - Abstract: The environmental pollution resulting from chemical accidents has caused increasingly serious concerns. Therefore, it is very important to be able to determine in advance the appropriate emergency treatment and disposal technology for different types of chemical accidents. However, the formulation of an emergency plan for chemical pollution accidents is considerably difficult due to the substantial uncertainty and complexity of such accidents. This paper explains how the event tree method was used to create 54 different scenarios for chemical pollution accidents, based on the polluted medium, dangerous characteristics and properties of chemicals involved. For each type of chemical accident, feasible emergency treatment and disposal technology schemes were established, considering the areas of pollution source control, pollutant non-proliferation, contaminant elimination and waste disposal. Meanwhile, in order to obtain the optimum emergency disposal technology schemes as soon as the chemical pollution accident occurs from the plan repository, the technique evaluation index system was developed based on group decision-improved analytical hierarchy process (AHP), and has been tested by using a sudden aniline pollution accident that occurred in a river in December 2012.

Stepwise integral scaling method for severe accident analysis and its application to corium dispersion in direct containment heating

International Nuclear Information System (INIS)

Ishii, M.; Zhang, G.; No, H. C.; Eltwila, F.

1994-01-01

Accident sequences which lead to severe core damage and to possible radioactive fission products into the environment have a very low probability. However, the interest in this area increased significantly due to the occurrence of the small break loss-of-coolant accident at TMI-2 which led to partial core damage, and of the Chernobyl accident in the former USSR which led to extensive core disassembly and significant release of fission products over several countries. In particular, the latter accident raised the international concern over the potential consequences of severe accidents in nuclear reactor systems. One of the significant shortcomings in the analyses of severe accidents is the lack of well-established and reliable scaling criteria for various multiphase flow phenomena. However, the scaling criteria are essential to the severe accident, because the full scale tests are basically impossible to perform. They are required for (1) designing scaled down or simulation experiments, (2) evaluating data and extrapolating the data to prototypic conditions, and (3) developing correctly scaled physical models and correlations. In view of this, a new scaling method is developed for the analysis of severe accidents. Its approach is quite different from the conventional methods. In order to demonstrate its applicability, this new stepwise integral scaling method has been applied to the analysis of the corium dispersion problem in the direct containment heating. ((orig.))

Saphire models and software for ASP evaluations

International Nuclear Information System (INIS)

Sattison, M.B.

1997-01-01

The Idaho National Engineering Laboratory (INEL) over the three years has created 75 plant-specific Accident Sequence Precursor (ASP) models using the SAPHIRE suite of PRA codes. Along with the new models, the INEL has also developed a new module for SAPHIRE which is tailored specifically to the unique needs of ASP evaluations. These models and software will be the next generation of risk tools for the evaluation of accident precursors by both the U.S. Nuclear Regulatory Commission's (NRC's) Office of Nuclear Reactor Regulation (NRR) and the Office for Analysis and Evaluation of Operational Data (AEOD). This paper presents an overview of the models and software. Key characteristics include: (1) classification of the plant models according to plant response with a unique set of event trees for each plant class, (2) plant-specific fault trees using supercomponents, (3) generation and retention of all system and sequence cutsets, (4) full flexibility in modifying logic, regenerating cutsets, and requantifying results, and (5) user interface for streamlined evaluation of ASP events. Future plans for the ASP models is also presented

Radiation accidents with global consequences for the population. Problems of risk evaluation

International Nuclear Information System (INIS)

Vasilev, G.; Doncheva, B.; Stoilova, S.; Miloslavov, V.; Tsenova, T.; Novkirishki, V.

1987-01-01

The theoretical problems concerning the delayed impacts as a result of considerable radiation accidents are discussed. The attention is paid to the maximum individual doses which are relatively low but many people are affected. In these cases, the risk evaluation is based on the cancerogenesis, genetic and teratogenetic consequences among the concerned population. The main equation of the linear threshold-free model 'dose effect' is subjected to analysis. Considering the real prognostic importance of this equation the following recommendations are made: further observation on epidemic diseases; investigation of teratogenetic consequences in connection with the radiation doses obtained during the antenatal development; radiation-hygienic standardization of the oral absorbtion of radionuclides for short and long periods of time; effective equivalent dose determination according to the irradiated organ or tissue (mammary glands, lungs, red marrow, gonads, skin); necessity of national system for in time announcement of radiation accidents, as well as suitable control of the internal and the external irradiation

Evaluation of decision support systems for nuclear accidents

International Nuclear Information System (INIS)

Sdouz, G.; Mueck, K.

1998-05-01

In order to adopt countermeasures to protect the public after an accident in a nuclear power plant in an appropriate and optimum way, decision support systems offer a valuable assistance in supporting the decision maker in choosing and optimizing protective actions. Such decision support systems may range from simple systems to accumulate relevant parameters for the evaluation of the situation over prediction models for the rapid evaluation of the dose to be expected to systems which permit the evaluation and comparison of possible countermeasures. Since the establishment of a decision support systems obviously is also required in Austria, an evaluation of systems available or in the state of development in other countries or unions was performed. The aim was to determine the availability of decision support systems in various countries and to evaluate them with regard to depth and extent of the system. The evaluation showed that in most industrialized countries the requirement for a decision support system was realized, but in only few countries actual systems are readily available and operable. Most systems are limited to early phase consequences, i.e. dispersion calculations of calculated source terms and the estimation of exposure in the vicinity of the plant. Only few systems offer the possibility to predict long-term exposures by ingestion. Few systems permit also an evaluation of potential countermeasures, in most cases, however, limited to a few short-term countermeasures. Only one system which is presently not operable allows the evaluation of a large number of agricultural countermeasures. In this report the different systems are compared. The requirements with regard to an Austrian decision support system are defined and consequences for a possible utilization of a DSS or parts thereof for the Austrian decision support system are derived. (author)

Evaluation of severe accident risks, Grand Gulf, Unit 1: Appendices

International Nuclear Information System (INIS)

Brown, T.D.; Breeding, R.J.; Jow, H.N.; Higgins, S.J.; Shiver, A.W.; Helton, J.C.; Amos, C.N.

1990-12-01

In support of the Nuclear Regulatory Commission's (NRC's) assessment of the risk from severe accidents at commercial nuclear power plants in the US report in NUREG-1150, the Severe Accident Risk Reduction Program (SARRP) has completed a revised calculation of the risk to the general public from severe accidents at the Grand Gulf Nuclear Station, Unit 1. This power plant, located in Port Gibson, Mississippi, is operated by the System Energy Resources, Inc. (SERI). The emphasis in this risk analysis was not on determining a ''so-called'' point estimate of risk. Rather, it was to determine the distribution of risk, and to discover the uncertainties that account for the breadth of this distribution. Off-site risk initiated by events internal to the power plant was assessed. This document provides Appendices A through E for this report. Topics included are, respectively: supporting information for the accident progression analysis; supporting information for the source term analysis; supporting information for the consequence analysis; risk results; and sampling information

Assumptions used for evaluating the potential radiological consequences of a less of coolant accident for pressurized water reactors - June 1974

International Nuclear Information System (INIS)

Anon.

1974-01-01

Section 50.34 of 10 CFR Part 50 requires that each applicant for a construction permit or operating license provide an analysis and evaluation of the design and performance of structures, systems, and components of the facility with the objective of assessing the risk to public health and safety resulting from operation of the facility. The design basis loss of coolant accident is one of the postulated accidents used to evaluate the adequacy of these structures, systems, and components with respect to the public health and safety. This guide gives acceptable assumptions that may be used in evaluating the radiological consequences of this accident for a pressurized water reactor. In some cases, unusual site characteristics, plant design features, or other factors may require different assumptions which will be considered on an individual case basis. The Advisory Committee on Reactor Safeguards has been consulted concerning this guide and has concurred in the regulatory position

Assumptions used for evaluating the potential radiological consequences of a loss of coolant accident for boiling water reactors - June 1974

International Nuclear Information System (INIS)

Anon.

1974-01-01

Section 50.34 of 10 CFR Part 50 requires that each applicant for a construction permit or operating license provide an analysis and evaluation of the design and performance of structures, systems, and components of the facility with the objective of assessing the risk to public health and safety resulting from operation of the facility. The design basis loss of coolant accident is one of the postulated accidents used to evaluate the adequacy of these structures, systems, and components with respect to the public health and safety. This guide gives acceptable assumptions that may be used in evaluating the radiological consequences of this accident for a pressurized water reactor. In some cases, unusual site characteristics, plant design features, or other factors may require different assumptions which will be considered on an individual case basis. The Advisory Committee on Reactor Safeguards has been consulted concerning this guide and has concurred in the regulatory position

Investigations of postulated accident sequences for the Fort St. Vrain HTGR

International Nuclear Information System (INIS)

Ball, S.J.; Cleveland, J.C.; Conklin, J.C.; Hatta, M.; Sanders, J.P.

1978-01-01

The systems analysis capability of the ORNL HTGR Safety analysis research program includes a family of computer codes: an overall plant NSSS simulation (ORTAP), and detailed component codes for investigating core neutronic accidents (CORTAP), shutdown emergency-cooling accidents via a 3-dimensional core model (ORECA), and once-through steam generator transients (BLAST). The component codes can either be run independently or in the overall NSSS code. Verification efforts have consisted primarily of using existing Fort St. Vrain reactor dynamics data to compare against code predictions. Comparisons of core thermal conditions made for reactor scrams from power levels between 30 and 50% showed good agreement. An optimization program was used to rationalize the difference between the predicted and measured refueling region outlet temperatures, and, in general, excellent agreement was attained by adjustment of models and parameters within their uncertainty ranges. However, more work is required to establish a unique and valid set of models

A comparative evaluation of sequence classification programs

Directory of Open Access Journals (Sweden)

Bazinet Adam L

2012-05-01

Full Text Available Abstract Background A fundamental problem in modern genomics is to taxonomically or functionally classify DNA sequence fragments derived from environmental sampling (i.e., metagenomics. Several different methods have been proposed for doing this effectively and efficiently, and many have been implemented in software. In addition to varying their basic algorithmic approach to classification, some methods screen sequence reads for ’barcoding genes’ like 16S rRNA, or various types of protein-coding genes. Due to the sheer number and complexity of methods, it can be difficult for a researcher to choose one that is well-suited for a particular analysis. Results We divided the very large number of programs that have been released in recent years for solving the sequence classification problem into three main categories based on the general algorithm they use to compare a query sequence against a database of sequences. We also evaluated the performance of the leading programs in each category on data sets whose taxonomic and functional composition is known. Conclusions We found significant variability in classification accuracy, precision, and resource consumption of sequence classification programs when used to analyze various metagenomics data sets. However, we observe some general trends and patterns that will be useful to researchers who use sequence classification programs.

Evaluation of the Three Mile Island accident in the context of WASH-1400

International Nuclear Information System (INIS)

Burns, R.D. III.

1980-01-01

The accident at unit 2 of the Three Mile Island nuclear station (TMI-2) on March 28, 1979, occurred after approximately 400 reactor years (RY) of commercial nuclear reactor operation in the US. The purpose of work summarized here was to evaluate the probability statements in the WASH-1400 reactor safety study (RSS) in view of the TMI-2 event and to estimate the likely public impact of TMI-2. The RSS probability estimate for such a release was found to be consistent with the fact that the TMI-2 accident occurred. The expected health effects are consistent with those for a low-level category of radioactivity release as described in the RSS and they are immeasurably small. However, the public perception of the health effects of the release is likely to be much more severe than the estimated health effects

Implementation of accident management programmes in nuclear power plants

International Nuclear Information System (INIS)

2004-01-01

good practices and developments in Member States and is intended as reference material for NPPs, as well as an information source for other organizations such as regulatory bodies. It is a follow-up to the IAEA report on Accident Management Programmes in Nuclear Power Plants, published in 1994, and reflects the considerable progress made since that time. The objective of this report is to provide a description of the elements to be addressed by the team responsible for developing and implementing a plant specific AMP at an NPP. Although it is intended primarily for use by NPP operators, utilities and their technical support organizations, it can also facilitate preparation of the relevant national regulatory requirements. Important event sequences that may lead to severe accidents shall be identified using a combination of probabilistic methods, deterministic methods and sound engineering judgement. These event sequences shall then be reviewed against a set of criteria aimed at determining which severe accidents should be addressed in the design. Potential design or procedural changes that could either reduce the likelihood of these selected events, or mitigate their consequences, should these selected events occur, shall be evaluated, and shall be implemented if reasonably practicable. Consideration shall be given to the plant full design capabilities, including the possible use of some systems (i.e. safety and non-safety systems) beyond their originally intended function and anticipated operating conditions, and the use of additional temporary systems to return the plant to a controlled state and/or to mitigate the consequences of a severe accident, provided that it can be shown that the systems are able to function in the environmental conditions to be expected. For multiunit plants, consideration shall be given to the use of available means and/or support from other units, provided that the safe operation of the other units is not compromised. Accident management

A comparative evaluation of the consequences of the Chernobyl accident based on the internal dose of 137Cs to Japanese male adults

International Nuclear Information System (INIS)

Uchiyama, M.; Ishikawa, T.; Matsumoto, M.; Kobayashi, S.

1997-01-01

The Chernobyl accident released a large quantity of radionuclides into the environment. Many measurements were carried out to assess the consequent radiation doses around the world. The measurements of subjects from different countries at a given institution can serve for the comparative evaluation of their internal doses when one apparatus is used consistently for the measurements. We have measured radiocesium body burdens of both Japanese and foreigners since the Chernobyl accident using a whole-body counter. In the occasion of 10th anniversary of the accident, we evaluated the body burdens in order to compare the internal doses among countries. 5 refs, 3 figs

Severe accident considerations in Canadian nuclear power reactors

International Nuclear Information System (INIS)

Omar, A.M.; Measures, M.P.; Scott, C.K.; Lewis, M.J.

1990-08-01

This paper describes a current study on severe accidents being sponsored by the Atomic Energy Control Board (AECB) and provides background on other related Canadian work. Scoping calculations are performed in Phase I of the AECB study to establish the relative consequences of several permutations resulting from six postulated initiating events, nine containment states, and a selection of meteorological conditions and health effects mitigating criteria. In Phase II of the study, selected accidents sequences would be analyzed in detail using models suitable for the design features of the Canadian nuclear power reactors

Analysis of severe core damage accident progression for the heavy water reactor

International Nuclear Information System (INIS)

Tong Lili; Yuan Kai; Yuan Jingtian; Cao Xuewu

2010-01-01

In this study, the severe accident progression analysis of generic Canadian deuterium uranium reactor 6 was preliminarily provided using an integrated severe accident analysis code. The selected accident sequences were multiple steam generator tube rupture and large break loss-of-coolant accidents because these led to severe core damage with an assumed unavailability for several critical safety systems. The progressions of severe accident included a set of failed safety systems normally operated at full power, and initiative events led to primary heat transport system inventory blow-down or boil off. The core heat-up and melting, steam generator response,fuel channel and calandria vessel failure were analyzed. The results showed that the progression of a severe core damage accident induced by steam generator tube rupture or large break loss-of-coolant accidents in a CANDU reactor was slow due to heat sinks in the calandria vessel and vault. (authors)

Accident scenarios triggered by lightning strike on atmospheric storage tanks

International Nuclear Information System (INIS)

Necci, Amos; Argenti, Francesca; Landucci, Gabriele; Cozzani, Valerio

2014-01-01

Severe Natech accidents may be triggered by lightning strike affecting storage tanks containing relevant inventories of hazardous materials. The present study focused on the identification of event sequences and accident scenarios following lightning impact on atmospheric tanks. Reference event trees, validated using past accident analysis, are provided to describe the specific accident chains identified, accounting for reference protection and mitigation safety barriers usually adopted in current industrial practice. An overall methodology was outlined to allow the calculation of the expected frequencies of final scenarios following lightning impact on atmospheric storage tanks, taking into account the expected performance of available safety barriers. The methodology was applied to a case study in order to better understand the data that may be obtained and their importance in the framework of quantitative risk assessment (QRA) and of the risk management of industrial facilities with respect to external hazards due to natural events. - Highlights: • Event sequences following lightning impact on atmospheric tanks were identified. • Reference event trees including standard safety barriers were obtained. • Safety barriers applied in industrial practice were assessed to quantify event trees. • Frequencies of final scenarios following lightning impact on tanks were calculated. • Natech scenarios caused by lightning have an important influence on risk profiles

School accidents in Austria.

Science.gov (United States)

Schalamon, Johannes; Eberl, Robert; Ainoedhofer, Herwig; Singer, Georg; Spitzer, Peter; Mayr, Johannes; Schober, Peter H; Hoellwarth, Michael E

2007-09-01

The aim of this study was to obtain information about the mechanisms and types of injuries in school in Austria. Children between 0 and 18 years of age presenting with injuries at the trauma outpatient in the Department of Pediatric Surgery in Graz and six participating hospitals in Austria were evaluated over a 2-year prospective survey. A total of 28,983 pediatric trauma cases were registered. Personal data, site of the accident, circumstances and mechanisms of accident and the related diagnosis were evaluated. At the Department of Pediatric Surgery in Graz 21,582 questionnaires were completed, out of which 2,148 children had school accidents (10%). The remaining 7,401 questionnaires from peripheral hospitals included 890 school accidents (12%). The male/female ratio was 3:2. In general, sport injuries were a predominant cause of severe trauma (42% severe injuries), compared with other activities in and outside of the school building (26% severe injuries). Injuries during ball-sports contributed to 44% of severe injuries. The upper extremity was most frequently injured (34%), followed by lower extremity (32%), head and neck area (26%) and injuries to thorax and abdomen (8%). Half of all school related injuries occur in children between 10 and 13 years of age. There are typical gender related mechanisms of accident: Boys get frequently injured during soccer, violence, and collisions in and outside of the school building and during craft work. Girls have the highest risk of injuries at ball sports other than soccer.

Probabilistic risk assessment (PRA) update in light of the accident at Fukushima Daiichi Nuclear Power Station - 15461

International Nuclear Information System (INIS)

Maeda, K.; Abe, H.; Hirokawa, N.; Satou, C.

2015-01-01

We have performed internal and external event probabilistic risk assessments (PRA) for boiling water reactor power nuclear plants to identify the important accident sequence groups and to evaluate the effectiveness of the additional severe accident measures, regarding to the new regulatory requirements implemented after the accident at Fukushima Daiichi Nuclear Power Station in Japan in 2011. In addition, we will further update our PRA by extracting problems and improvements from the current PRA, by catching up the state-of-the-art knowledge, modern PRA methodologies in order to contribute voluntarily to safety improvement as well as to comply with regulations. In this document, prior to the extensive PRA updates, we would describe technical contents and qualitative results about PRA updates that have been performed preliminary so far, especially about the external event (seismic) PRA and how to model the additionally deployed severe accident measures (e.g. power supply car, fire engine) so that they can be function external hazards, such as component failure rate of equipment, human reliability 'out of control room', and mission time extension. (authors)

Technical evaluation: 300 Area steam line valve accident

International Nuclear Information System (INIS)

1993-08-01

On June 7, 1993, a journeyman power operator (JPO) was severely burned and later died as a result of the failure of a 6-in. valve that occurred when he attempted to open main steam supply (MSS) valve MSS-25 in the U-3 valve pit. The pit is located northwest of Building 331 in the 300 Area of the Hanford Site. Figure 1-1 shows a layout of the 300 Area steam piping system including the U-3 steam valve pit. Figure 1-2 shows a cutaway view of the approximately 10- by 13- by 16-ft-high valve pit with its various steam valves and connecting piping. Valve MSS-25, an 8-in. valve, is located at the bottom of the pit. The failed 6-in. valve was located at the top of the pit where it branched from the upper portion of the 8-in. line at the 8- by 8- by 6-in. tee and was then ''blanked off'' with a blind flange. The purpose of this technical evaluation was to determine the cause of the accident that led to the failure of the 6-in. valve. The probable cause for the 6-in. valve failure was determined by visual, nondestructive, and destructive examination of the failed valve and by metallurgical analysis of the fractured region of the valve. The cause of the accident was ultimately identified by correlating the observed failure mode to the most probable physical phenomenon. Thermal-hydraulic analyses, component stress analyses, and tests were performed to verify that the probable physical phenomenon could be reasonably expected to produce the failure in the valve that was observed

Evaluation of carbons exposed to the Three Mile Island accident

International Nuclear Information System (INIS)

Deitz, V.R.; Romans, J.B.; Bellamy, R.R.

1981-01-01

One of the lines of defense that served to mitigate the radiological effects of the accident at Three Mile Island was the activated carbon installed in ventilation air flows. Filters in the Auxiliary and Fuel Handling Buildings of Unit 2 adsorbed tens to hundreds of curies of iodine-131, preventing the release to the environment. The carbon exposed to the accident has been replaced and the spent carbon has been analyzed in the laboratory. Independent analyses were performed for the two filter trains in both the Auxiliary and Fuel Handling Buildings, replaced at various times after the accident. The results of these analyses are compared to new (unexposed) carbons

Instrumentation Performance during the TMI-2 Accident

International Nuclear Information System (INIS)

Rempe, Joy L.; Knudson, Darrell L.

2013-06-01

The accident at the Three Mile Island Unit 2 (TMI- 2) reactor provided a unique opportunity to evaluate sensors exposed to severe accident conditions. Conditions associated with the release of coolant and the hydrogen burn that occurred during this accident exposed instrumentation to harsh conditions, including direct radiation, radioactive contamination, and high humidity with elevated temperatures and pressures. As part of a program initiated by the Department of Energy Office of Nuclear Energy (DOE-NE), a review was completed to gain insights from prior TMI-2 sensor survivability and data qualification efforts. This new effort focused upon a set of sensors that provided critical data to TMI-2 operators for assessing the condition of the plant and the effects of mitigating actions taken by these operators. In addition, the effort considered sensors providing data required for subsequent accident simulations. Over 100 references related to instrumentation performance and post-accident evaluations of TMI-2 sensors and measurements were reviewed. Insights gained from this review are summarized within this paper. As noted within this paper, several techniques were invoked in the TMI-2 post-accident program to evaluate sensor survivability status and data qualification, including comparisons with data from other sensors, analytical calculations, laboratory testing, and comparisons with sensors subjected to similar conditions in large-scale integral tests and with sensors that were similar in design but more easily removed from the TMI-2 plant for evaluations. Conclusions from this review provide important insights related to sensor survivability and enhancement options for improving sensor performance. In addition, this paper provides recommendations related to sensor survivability and the data evaluation process that could be implemented in upcoming Fukushima Daiichi recovery efforts. (authors)

The analysis of pressurizer safety valve stuck open accident for low power and shutdown PSA

Energy Technology Data Exchange (ETDEWEB)

Lim, Ho Gon; Park, Jin Hee; Jang, Seong Chul; Kim, Tae Woon

2005-01-01

The PSV (Pressurizer Safety Valve) popping test carried out practically in the early phase of a refueling outage has a little possibility of triggering a test-induced LOCA due to a PSV not fully closed or stuck open. According to a KSNP (Korea Standard Nuclear Power Plant) low power and shutdown PSA (Probabilistic Safety Assessment), the failure of a HPSI (High Pressure Safety Injection) following a PSV stuck open was identified as a dominant accident sequence with a significant contribution to low power and shutdown risks. In this study, we aim to investigate the consequences of the NPP for the various accident sequences following the PSV stuck open as an initiating event through the thermal-hydraulic system code calculations. Also, we search the accident mitigation method for the sequence of HPSI failure, then, the applicability of the method is verified by the simulations using T/H system code.

Analysis of search and rescue emergency evaluation in ship accidents in Indonesia

Directory of Open Access Journals (Sweden)

Arleiny

2018-01-01

Full Text Available The objectives og this research is to describe the factors causing ship accident in Indonesia and know the effectiveness of SAR emergency in ship accident in Indonesia. The research method used in this research is qualitative research. Techniques Collection of literature study data and documents. Data validity method using triangulation. Data analysis uses interactive data analysis. The conclusions of this study are Factors that cause the occurrence of ship accidents in Indonesia, among others, the resources of the crew, the eligibility of ships, supporting facilities for shipping, operators, lack of supervision of apparatus, service users and other factors. The high number of ship accidents in Indonesia shows the ineffective implementation of SAR in ship accident in Indonesia.

Accident assessment under emergency situation in Daya Bay nuclear power station

International Nuclear Information System (INIS)

Yang Ling; Chen Degan; Lin Shumou; Fu Guohui

2004-01-01

The accident assessment under emergency situation includes the accident status evaluation and its consequence estimation. This paper introduces evaluation methods for accident status and its assistant computer system (SESAME-GNP) utilized during the emergency situation in Guangdong Daya Bay Nuclear Power Station (GNPS) in detail. At the same time, an improved accident consequence estimation system in GNPS (RACAS-GNP) is briefly described. With the improvement of the accident assessment systems, the capability of emergency response in GNPS is strengthened

Accident management for severe accidents

International Nuclear Information System (INIS)

Bari, R.A.; Pratt, W.T.; Lehner, J.; Leonard, M.; Disalvo, R.; Sheron, B.

1988-01-01

The management of severe accidents in light water reactors is receiving much attention in several countries. The reduction of risk by measures and/or actions that would affect the behavior of a severe accident is discussed. The research program that is being conducted by the US Nuclear Regulatory Commission focuses on both in-vessel accident management and containment and release accident management. The key issues and approaches taken in this program are summarized. 6 refs

The Fukushima accident

International Nuclear Information System (INIS)

Maqua, M.; Stueck, R.

2012-01-01

On 11 March 2011, the Tohoku earthquake and the subsequent tsunami hit the Japanese east coast, causing more than 15,000 fatalities. To this date, 3,000 people are still missing. The Fukushima Dai-ichi NPP was the nuclear installation that was most affected by the tsunami. The earthquake cut off the NPP from the national grid. About 45 minutes later, the tsunami flooded units 1-4 and led to core meltdown events with large releases for units 1, 2 and 3. Unit 4 had been in refuelling outage at that time and lost the cooling of the spent fuel pool for several days. Considerable hydrogen explosions occurred in units 1, 3 and 4. Shortly after the accident, TEPCO started to mitigate the consequences of the accident by providing external cooling to the reactors and by removing the radioactive debris from the site. Great emphasis was laid on effective radiation protection measures for the clean-up workers. Thus, up to now there has been no fatality due to the radiation caused by the Fukushima accident. The main steps of the accident sequences are described, taking into account the latest findings of investigations performed by TEPCO or on behalf of the regulatory body. The presentation focuses on the description of the status of the Fukushima Dai-ichi nuclear power plant and the future steps for cleaning-up the site. In the presentation, the major phases of the roadmap that TEPCO has developed for the clean-up are highlighted. The risks associated with the current plant status and the clean-up phases are described. Abstract the content of the manuscript in a few lines.

Interface requirements to couple thermal hydraulics codes to severe accident codes: ICARE/CATHARE

Energy Technology Data Exchange (ETDEWEB)

Camous, F.; Jacq, F.; Chatelard, P. [IPSN/DRS/SEMAR CE-Cadarache, St Paul Lez Durance (France)] [and others

1997-07-01

In order to describe with the same code the whole sequence of severe LWR accidents, up to the vessel failure, the Institute of Protection and Nuclear Safety has performed a coupling of the severe accident code ICARE2 to the thermalhydraulics code CATHARE2. The resulting code, ICARE/CATHARE, is designed to be as pertinent as possible in all the phases of the accident. This paper is mainly devoted to the description of the ICARE2-CATHARE2 coupling.

Report on the radiological accident in Goiania, Goias, Brazil

International Nuclear Information System (INIS)

Alves, R.N.

1988-01-01

The report describes the radiological accident occured in Goiania, Brazil, in september 1987. The following aspects concerning the accident are presented in specific chapters: 1- evaluation of the accident and the first aids, 2- attendance to the victims of Goiania radiological accident, 3- decontamination, 4- radioactive wastes arising from the accident, 5- working personnel and technical cooperation, 6- equipments and 7- radiation protection: limits and recommendations [pt

Clinical evaluation of further-developed MRCP sequences in comparison with standard MRCP sequences

International Nuclear Information System (INIS)

Hundt, W.; Scheidler, J.; Reiser, M.; Petsch, R.

2002-01-01

The purpose of this study was the comparison of technically improved single-shot magnetic resonance cholangiopancreatography (MRCP) sequences with standard single-shot rapid acquisition with relaxation enhancement (RARE) and half-Fourier acquired single-shot turbo spin-echo (HASTE) sequences in evaluating the normal and abnormal biliary duct system. The bile duct system of 45 patients was prospectively investigated on a 1.5-T MRI system. The investigation was performed with RARE and HASTE MR cholangiography sequences with standard and high spatial resolutions, and with a delayed-echo half-Fourier RARE (HASTE) sequence. Findings of the improved MRCP sequences were compared with the standard MRCP sequences. The level of confidence in assessing the diagnosis was divided into five groups. The Wilcoxon signed-rank test at a level of p<0.05 was applied. In 15 patients no pathology was found. The MRCP showed stenoses of the bile duct system in 10 patients and choledocholithiasis and cholecystolithiasis in 16 patients. In 12 patients a dilatation of the bile duct system was found. Comparison of the low- and high spatial resolution sequences and the short and long TE times of the half-Fourier RARE (HASTE) sequence revealed no statistically significant differences regarding accuracy of the examination. The diagnostic confidence level in assessing normal or pathological findings for the high-resolution RARE and half-Fourier RARE (HASTE) was significantly better than for the standard sequences. For the delayed-echo half-Fourier RARE (HASTE) sequence no statistically significant difference was seen. The high-resolution RARE and half-Fourier RARE (HASTE) sequences had a higher confidence level, but there was no significant difference in diagnosis in terms of detection and assessment of pathological changes in the biliary duct system compared with standard sequences. (orig.)

Comparative evaluations of surface contamination detectors calibration with radioactive sources - used in the Goiania accident, and standard sources

International Nuclear Information System (INIS)

Becker, P.H.B.; Marecha, M.H.H.

1997-01-01

The construction of Cs-137 standard flat sources for calibration of surface contamination detectors, used in the Goiania accident in 1987, is described and the procedures adopted are reported. At that time, standard sources were not available. Nowadays the Instituto de Radioprotecao e Dosimetria has standard sources acquired from Amersham which are used as calibration standards for surface contamination detectors. Comparative evaluations between the standard flat sources constructed for the accident and the calibrated ones are presented

Severe accident research activities at Helmholtz-Zentrum Dresden-Rossendorf (HZDR)

Energy Technology Data Exchange (ETDEWEB)

Wilhelm, Polina; Jobst, Matthias; Schaefer, Frank; Kliem, Soeren [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany)

2016-05-15

In the frame of the nuclear safety research program of the Helmholtz Association HZDR performs fundamental and applied research to assess and to reduce the risks related to the nuclear fuel cycle and the production of electricity in nuclear power plants. One of the research topics focuses on the safety aspects of current and future reactor designs. This includes the development and application of methods for analyses of transients and postulated accidents, covering the whole spectrum from normal operation till severe accident sequences including core degradation. This paper gives an overview of the severe accident research activities at the Reactor Safety Division at the Institute of Resource Ecology.

LWR and HTGR coolant dynamics: the containment of severe accidents

International Nuclear Information System (INIS)

Theofanous, T.G.; Gherson, P.; Nourbakhsh, H.P.; Hu, K.; Iyer, K.; Viskanta, R.; Lommers, L.

1983-07-01

This is the final report of a project containing three major tasks. Task I deals with the fundamental aspects of energetic fuel/coolant interactions (steam explosions) as they pertain to LWR core melt accidents. Task II deals with the applied aspects of LWR core melt accident sequences and mechanisms important to containment response, and includes consideration of energetic fuel/coolant interaction events, as well as non-explosive ones, corium material disposition and eventual coolability, and containment pressurization phenomena. Finally, Task III is concerned with HTGR loss of forced circulation accidents. This report is organized into three major parts corresponding to these three tasks respectively

Application of FISH method in evaluation of a radiation accident

International Nuclear Information System (INIS)

Wang Mingming; Zheng Siying; Duan Zhikai; Zhang Shuxian; Xu Honglan

2004-01-01

To study effects of long term radiation hazard and explore the possibility of the application of chromosome aberration and FISH method to dose retrospection and reconstruction, FISH method was used to detect biological destination of three accidental victims at 7.5 years after Xinzhou accident. In the meantime, conventional chromosomal aberration, G-banding, CB micronuclei and HPRT gene locus mutation assays were performed. In addition, the growth and development of Victim S, who suffered the radiation accident as a fetus, were examined. And comparison of dose estimations between chromosome aberration and FISH method of the victims was conducted. The results demonstrated that the biological dose estimated by translocation frequency is very close to the imitated dose by the physical way after the accident if enough cells are observed. It is suggested that FISH may be applied to dose retrospection and reconstruction. Obvious chromosomal aberrations still existed in the examined victims at 7.5 years after the accident and displayed good dose correlative dependence. The results also showed that the growth and development of S were basically normal after birth

Evaluation of sanitary consequences of Chernobylsk accident in France. Epidemiological surveillance plan, state of knowledge, risks evaluation and perspectives; Evaluation des consequences sanitaires de l'accident de Tchernobyl en France. Dispositif de surveillance epidemiologique, etat des connaissances, evaluation des risques et perspectives

Energy Technology Data Exchange (ETDEWEB)

Verger, P.; Cherie-Challine, L

2000-12-15

This report jointly written by IPSN and InVS, reviews the sanitary consequences in France of the Chernobyl accident, which occurred in 1986. The first point is dedicated to a short presentation of the knowledge relative to the sanitary consequences of the Chernobyl accident in the high contaminated countries and to the risk factors of the thyroid cancer. Secondly, this report describes the main systems of epidemiological surveillance of health implemented in France in 1986 and in 1999, as well as the data of the incidence and mortality of thyroid cancer observed in France since 1975. In addition, this report presents an analysis of the risk of thyroid cancer related to radioactive contamination in France, for young people of less than 15 years of age who where living in 1986 in the highest contaminated areas of France (Eastern territories). For this purpose, the theoretical number of thyroid cancers in excess is evaluated for this population, on the basis of different available risk model. Finally starting from the results of risk assessment, there is a discussion about the relevance and the feasibility of different epidemiological methods in view of answering the questions related to the sanitary consequences of the Chernobyl accident. In conclusion, this report recommends to reinforce the surveillance of thyroid cancer in France. (author)

Source term and radiological consequence evaluation for nuclear accidents using a 'hand type' methodology

International Nuclear Information System (INIS)

Margeanu, Sorin; Tatiana, Angelescu

2005-01-01

In the last decades, hand type calculations have been replaced by computerized solutions, which are much more accurate, but the preparation of an input to run the code can be a time consuming process and can require a laborious work. This is why, a place for hand calculation based on nomograms still exist in some areas. An example is emergency response to an accidental release of radioactive contaminants when the health of persons close to the accident site might be at risk. In this case, results from computerized accident consequences assessment models may be delayed due to the equipment malfunction or the time required developing minimal input files and performing the calculations (typically more than five minutes). A simple nomogram (developed using computerized dispersion model calculations) can provide dispersion and dose estimates within a minute. The paper presents the methodology used for these 'hand type' calculation and the nomograms, figures and tables used to evaluate the dose to an individual close to the release point. In order to illustrate the use of methodology, a hypothetical severe accident scenario involving 14-MW INR-TRIGA research reactor was considered. (authors)

Analyses of containment loading by hydrogen burning during hypothetical core meltdown accidents

International Nuclear Information System (INIS)

Bracht, K.; Tiltmann, M.

1983-01-01

The possibility of occurance of violent hydrogen burning during a LWR meltdown accident and its consequences to containment atmosphere conditions are discussed. Two accident sequences with low and high system pressure during the in-vessel-melt phase of a meltdown accident are considered. In both sequences only deflagration, but no detonation may become possible, presuming homogeneity of the containment atmospheres. In a low pressure szenario the pressure increase due to deflagration will not reach the failure pressure of the containment, if combustion takes place when the flammability limit is reached. For the special situation of a rapid release of steam and hydrogen after a high-pressure failure of a reactor pressure vessel, calculations with a multicompartment code show that the possibility for hydrogen burning does not exist. Thus, an additional augmentation of the steam spike as a consequence of the failure of the pressure vessel cannot occur. (orig.)

The Integrated Approach to the Accident Evaluation for Advanced LWRs

International Nuclear Information System (INIS)

Oriolo, F.; Paci, S.

1998-01-01

The present paper discusses some relevant phenomena occurring in advanced LWRs during postulated accident scenarios. In particular, the operation of ESF is the starting point for analysis of those phenomena that cause the mutual influence between PS and containment in these plants. As a consequence, it is highlighted as accident analyses which treat PS and containment phenomena completely separated may be not adequate when applied to innovate reactors. Exemplified thermal-hydraulic analysis are presented for AP600 and SBWR, using the FUMO integrated model, for highlight accident evolution taking into account these interactions. The architecture of this integrated code is presented highlighting the importance of an integrated approach to the safety analysis in innovative reactors. (author)

Synthesis of the models used in France for the evaluation of the consequences of accident

International Nuclear Information System (INIS)

Crabol, B.

1992-01-01

In order to evaluate the consequences of an atmospheric release in case of an accident on a nuclear installation, different predictive models have been developed by the organizations involved in the management of the crisis. These models are of different numerical complexity: precalculated graphs, gaussian puff models or 3D models. The harmonization of these models, the definition of their use, notably in the first phases of the accident (predictive and real-time phases) have been discussed in a working group including representants of the utility, the safety authorities and the Meteorological Office. The reflexions of the group, the models already operational, those still under discussion and their use in the different technical crisis centers are presented

Accident tolerant clad material modeling by MELCOR: Benchmark for SURRY Short Term Station Black Out

International Nuclear Information System (INIS)

Wang, Jun; Mccabe, Mckinleigh; Wu, Lei; Dong, Xiaomeng; Wang, Xianmao; Haskin, Troy Christopher; Corradini, Michael L.

2017-01-01

Highlights: • Thermo-physical and oxidation kinetics properties calculation and analysis of FeCrAl. • Properties modelling of FeCrAl in MELCOR. • Benchmark calculation of Surry nuclear power plant. - Abstract: Accident tolerant fuel and cladding materials are being investigated to provide a greater resistance to fuel degradation, oxidation and melting if long-term cooling is lost in a Light Water Reactor (LWR) following an accident such as a Station Blackout (SBO) or Loss of Coolant Accident (LOCA). Researchers at UW-Madison are analyzing an SBO sequence and examining the effect of a loss of auxiliary feedwater (AFW) with the MELCOR systems code. Our research work considers accident tolerant cladding materials (e.g., FeCrAl alloy) and their effect on the accident behavior. We first gathered the physical properties of this alternative cladding material via literature review and compared it to the usual zirconium alloys used in LWRs. We then developed a model for the Surry reactor for a Short-term SBO sequence and examined the effect of replacing FeCrAl for Zircaloy cladding. The analysis uses MELCOR, Version 1.8.6 YR, which is developed by Idaho National Laboratory in collaboration with MELCOR developers at Sandia National Laboratories. This version allows the user to alter the cladding material considered, and our study examines the behavior of the FeCrAl alloy as a substitute for Zircaloy. Our benchmark comparisons with the Sandia National Laboratory’s analysis of Surry using MELCOR 1.8.6 and the more recent MELCOR 2.1 indicate good overall agreement through the early phases of the accident progression. When FeCrAl is substituted for Zircaloy to examine its performance, we confirmed that FeCrAl slows the accident progression and reduce the amount of hydrogen generated. Our analyses also show that this special version of MELCOR can be used to evaluate other potential ATF cladding materials, e.g., SiC as well as innovative coatings on zirconium cladding

Accident tolerant clad material modeling by MELCOR: Benchmark for SURRY Short Term Station Black Out

Energy Technology Data Exchange (ETDEWEB)

Wang, Jun, E-mail: jwang564@wisc.edu [College of Engineering, The University of Wisconsin-Madison, Madison 53706 (United States); Mccabe, Mckinleigh [College of Engineering, The University of Wisconsin-Madison, Madison 53706 (United States); Wu, Lei [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Dong, Xiaomeng [College of Engineering, The University of Wisconsin-Madison, Madison 53706 (United States); Wang, Xianmao [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Haskin, Troy Christopher [College of Engineering, The University of Wisconsin-Madison, Madison 53706 (United States); Corradini, Michael L., E-mail: corradini@engr.wisc.edu [College of Engineering, The University of Wisconsin-Madison, Madison 53706 (United States)

2017-03-15

Highlights: • Thermo-physical and oxidation kinetics properties calculation and analysis of FeCrAl. • Properties modelling of FeCrAl in MELCOR. • Benchmark calculation of Surry nuclear power plant. - Abstract: Accident tolerant fuel and cladding materials are being investigated to provide a greater resistance to fuel degradation, oxidation and melting if long-term cooling is lost in a Light Water Reactor (LWR) following an accident such as a Station Blackout (SBO) or Loss of Coolant Accident (LOCA). Researchers at UW-Madison are analyzing an SBO sequence and examining the effect of a loss of auxiliary feedwater (AFW) with the MELCOR systems code. Our research work considers accident tolerant cladding materials (e.g., FeCrAl alloy) and their effect on the accident behavior. We first gathered the physical properties of this alternative cladding material via literature review and compared it to the usual zirconium alloys used in LWRs. We then developed a model for the Surry reactor for a Short-term SBO sequence and examined the effect of replacing FeCrAl for Zircaloy cladding. The analysis uses MELCOR, Version 1.8.6 YR, which is developed by Idaho National Laboratory in collaboration with MELCOR developers at Sandia National Laboratories. This version allows the user to alter the cladding material considered, and our study examines the behavior of the FeCrAl alloy as a substitute for Zircaloy. Our benchmark comparisons with the Sandia National Laboratory’s analysis of Surry using MELCOR 1.8.6 and the more recent MELCOR 2.1 indicate good overall agreement through the early phases of the accident progression. When FeCrAl is substituted for Zircaloy to examine its performance, we confirmed that FeCrAl slows the accident progression and reduce the amount of hydrogen generated. Our analyses also show that this special version of MELCOR can be used to evaluate other potential ATF cladding materials, e.g., SiC as well as innovative coatings on zirconium cladding

Cesium-137: psychological and social consequences of the Goiania's accident

International Nuclear Information System (INIS)

Helou, Suzana; Costa Neto, Sebastiao Benicio da

1995-01-01

The book care for radioactive accident occurred in 1987 in Goiania - brazilian city. The accident had origin by the hospitable equipment incorrect handling which contained a stainless steel capsule, in which interior there was cesium-137 chloride. The main boarded aspects are: psychological and social aspects verified after the accident; psychological and social analysis of population of Goiania three years after the accident; essay on the pertinence of Luscher's abbreviate test in psychological evaluation of the radioactive accident victims of Goiania; and psychological and mobile evaluation of intra-uterus children exposed to the radiation with cesium-137

Consequences of potential accidents in heavy water plants

International Nuclear Information System (INIS)

Croitoru, C.; Lazar, R.E.; Preda, I.A.; Dumitrescu, M.

2002-01-01

Heavy water plants achieve the primary isotopic concentration by H 2 O-H 2 S chemical exchange. In these plants are stored large quantities of hydrogen sulphide (high toxic, corrosive, flammable and explosive) maintained in process at relative high temperatures and pressures. It is required an assessment of risks associated with the potential accidents. The paper presents adopted model for quantitative consequences assessment in heavy water plants. Following five basic steps are used to identify the risks involved in plants operation: hazard identification, accident sequences development, H 2 S emissions calculus, dispersion analyses and consequences determination. A brief description of each step and some information from risk assessment for our heavy water pilot plant are provided. Accident magnitude, atmospheric conditions and population density in studied area were accounted for consequences calculus. (author)

Desktop Severe Accident Graphic Simulator Module for CANDU6 : PSAIS

International Nuclear Information System (INIS)

Park, S. Y.; Song, Y. M.

2015-01-01

The ISAAC ((Integrated Severe Accident Analysis Code for CANDU Plant) code is a system level computer code capable of performing integral analyses of potential severe accident progressions in nuclear power plants, whose main purpose is to support a Level 2 probabilistic safety assessment or severe accident management strategy developments. The code has the capability to predict a severe accident progression by modeling the CANDU6- specific systems and the expected physical phenomena based on the current understanding of the unique accident progressions. The code models the sequence of accident progressions from a core heatup, pressure tube/calandria tube rupture after an uncovery from inside and outside, a relocation of the damaged fuel to the bottom of the calandria, debris behavior in the calandria, corium quenching after a debris relocation from the calandria to the calandria vault and an erosion of the calandria vault concrete floor, a hydrogen burn, and a reactor building failure. Along with the thermal hydraulics, the fission product behavior is also considered in the primary system as well as in the reactor building

A review of severe accident assessment

International Nuclear Information System (INIS)

Kawashima, Kei

2000-01-01

One of the most difficult problems on evaluation of external costs on nuclear power generation is value on a severe accident risk. Once forming a severe accident, its effect is very important and extends to a wide range, to give a lot of damages. It is a main area of study on externality of energy to compare various risks by means of price conversion at unit kWh. Here was outlined on research examples on main severe accident risks before then. A common fact on estimation cost such research examples is to limit it to direct cost (mainly to health damage) at accident phenomenon. As an actual problem, it is very difficult to substantially quantify such parameters because of basically belonging to social psychology. It is due to no finding out decisive evaluation method on this problem to be adopted conventional EED (Expert Expected Damages) approach in the ExternE Phase III, either. (G.K.)

Studies of severe accidents in light-water reactors

International Nuclear Information System (INIS)

1987-01-01

From 10 to 12 November 1986 some 80 delegates met under the auspices of the CEC working group on the safety of light-water reactors. The participants from EC Member States were joined by colleagues from Sweden, Finland and the USA and met to discuss the subject of severe accidents in LWRs. Although this seminar had been planned well before Chernobyl, the ''severe-accident-that-really-happened'' made its mark on the seminar. The four main seminar topics were: (i) high source-term accident sequences identified in PSAs, (ii) containment performance, (iii) mitigation of core melt consequences, (iv) severe accident management in LWRs. In addition to the final panel discussion there was also a separate panel discussion on lessons learned from the Chernobyl accident. These proceedings include the papers presented during the seminar and they are arranged following the seminar programme outline. The presentations and discussions of the two panels are not included in the proceedings. The general conclusions and directions following from these two panels were, however, considered in a seminar review paper which was published in the March 1987 issue of Nuclear Engineering International