Preliminary evaluation of the Accident Response Mobile Manipulation System for accident site salvage operations

International Nuclear Information System (INIS)

Trujillo, J.M.; Morse, W.D.; Jones, D.P.

1994-01-01

This paper describes and evaluates operational experiences with the Accident Response Mobile Manipulation System (ARMMS) during simulated accident site salvage operations which might involve nuclear weapons. The ARMMS is based upon a teleoperated mobility platform with two Schilling Titan 7F Manipulators

Improvements in the nuclear accident response system in Brazil

International Nuclear Information System (INIS)

Estrada, J.J.S.; Azevedo, E.M.; Knofel, T.M.J.; Recio, J.C.A.; Alves, R.N.

1998-01-01

The National Commission on Nuclear Energy has been making outstanding effort to improve its nuclear and radiological accident response systems since the tragic accident in Goiania. Most of this effort is related to nuclear area although the radiological accident has been also considered. This paper describes the improvements in the CNEN response system structure, discusses several topics involving those related to emergency planning and preparedness, and points out some deficiencies that need to be corrected also. The situation during the Goiania accident was more disadvantageous than nowadays, so it is believed that none of the actual deficiencies are sufficient to guess that the population and the environment will not be protected in case of a nuclear or radiological accident

Neural network-based expert system for severe accident management

International Nuclear Information System (INIS)

Klopp, G.T.; Silverman, E.B.

1992-01-01

This paper presents the results of the second phase of a three-phase Severe Accident Management expert system program underway at Commonwealth Edison Company (CECo). Phase I successfully demonstrated the feasibility of Artificial Neural Networks to support several of the objectives of severe accident management. Simulated accident scenarios were generated by the Modular Accident Analysis Program (MAAP) code currently in use by CECo as part of their Individual Plant Evaluations (IPE)/Accident Management Program. The primary objectives of the second phase were to develop and demonstrate four capabilities of neural networks with respect to nuclear power plant severe accident monitoring and prediction. The results of this work would form the foundation of a demonstration system which included expert system performance features. These capabilities included the ability to: (1) Predict the time available prior to support plate (and reactor vessel) failure; (2) Calculate the time remaining until recovery actions were too late to prevent core damage; (3) Predict future parameter values of each of the MAAP parameter variables; and (4) Detect simulated sensor failure and provide best-value estimates for further processing in the presence of a sensor failure. A variety of accident scenarios for the Zion and Dresden plants were used to train and test the neural network expert system. These included large and small break LOCAs as well as a range of transient events. 3 refs., 1 fig., 1 tab

The computer aided education and training system for accident management

International Nuclear Information System (INIS)

Yoneyama, Mitsuru; Masuda, Takahiro; Kubota, Ryuji; Fujiwara, Tadashi; Sakuma, Hitoshi

2000-01-01

Under severe accident conditions of a nuclear power plant, plant operators and technical support center (TSC) staffs will be under a amount of stress. Therefore, those individuals responsible for managing the plant should promote their understanding about the accident management and operations. Moreover, it is also important to train in ordinary times, so that they can carry out accident management operations effectively on severe accidents. Therefore, the education and training system which works on personal computers was developed by Japanese BWR group (Tokyo Electric Power Co.,Inc., Tohoku Electric Power Co. ,Inc., Chubu Electric Power Co. ,Inc., Hokuriku Electric Power Co.,Inc., Chugoku Electric Power Co.,Inc., Japan Atomic Power Co.,Inc.), and Hitachi, Ltd. The education and training system is composed of two systems. One is computer aided instruction (CAI) education system and the other is education and training system with a computer simulation. Both systems are designed to execute on MS-Windows(R) platform of personal computers. These systems provide plant operators and technical support center staffs with an effective education and training tool for accident management. TEPCO used the simulation system for the emergency exercise assuming the occurrence of hypothetical severe accident, and have performed an effective exercise in March, 2000. (author)

Evaluation and Prediction present of radionuclide for surface wipe sample in Emergency Related with Fukushima Nuclear Accident

International Nuclear Information System (INIS)

Zalina Laili; Muhamat Omar; Woo, Y.M.

2011-01-01

Surface wipe samples of aircraft and container from Japan that were exposed to radioactive dust fallout due to Fukushima nuclear accident has been analysed using gamma spectrometry systems. The samples were analysed to determine their contamination levels. The surface of aircraft and container might be exposed to short and long lived fission and activation products. Thus, good evaluations, as well as a reliable and reasonable judgment were needed in order to determine the presence of fission and activation products. A work procedure has been developed to evaluate and predict the presence of fission and activation products in surface wipe samples. Good references, skilled and experienced level in analysis, a well calibrated and validated detector system were the important factors in determining the presence of fission and activation products in surface wipe samples. (author)

Accidents and undetermined deaths: re-evaluation of nationwide samples from the Scandinavian countries.

Science.gov (United States)

Tøllefsen, Ingvild Maria; Thiblin, Ingemar; Helweg-Larsen, Karin; Hem, Erlend; Kastrup, Marianne; Nyberg, Ullakarin; Rogde, Sidsel; Zahl, Per-Henrik; Østevold, Gunvor; Ekeberg, Øivind

2016-05-27

National mortality statistics should be comparable between countries that use the World Health Organization's International Classification of Diseases. Distinguishing between manners of death, especially suicides and accidents, is a challenge. Knowledge about accidents is important in prevention of both accidents and suicides. The aim of the present study was to assess the reliability of classifying deaths as accidents and undetermined manner of deaths in the three Scandinavian countries and to compare cross-national differences. The cause of death registers in Norway, Sweden and Denmark provided data from 2008 for samples of 600 deaths from each country, of which 200 were registered as suicides, 200 as accidents or undetermined manner of deaths and 200 as natural deaths. The information given to the eight experts was identical to the information used by the Cause of Death Register. This included death certificates, and if available external post-mortem examinations, forensic autopsy reports and police reports. In total, 69 % (Sweden and Norway) and 78 % (Denmark) of deaths registered in the official mortality statistics as accidents were confirmed by the experts. In the majority of the cases where disagreement was seen, the experts reclassified accidents to undetermined manner of death, in 26, 25 and 19 % of cases, respectively. Few cases were reclassified as suicides or natural deaths. Among the extracted accidents, the experts agreed least with the official mortality statistics concerning drowning and poisoning accidents. They also reported most uncertainty in these categories of accidents. In a second re-evaluation, where more information was made available, the Norwegian psychiatrist and forensic pathologist increased their agreement with the official mortality statistics from 76 to 87 %, and from 85 to 88 %, respectively, regarding the Norwegian and Swedish datasets. Among the extracted undetermined deaths in the Swedish dataset, the two experts

Development of an Accident Reproduction Simulator System Using a Hemodialysis Extracorporeal Circulation System

Science.gov (United States)

Nishite, Yoshiaki; Takesawa, Shingo

2016-01-01

Background: Accidents that occur during dialysis treatment are notified to the medical staff via alarms raised by the dialysis apparatus. Similar to such real accidents, apparatus activation or accidents can be reproduced by simulating a treatment situation. An alarm that corresponds to such accidents can be utilized in the simulation model. Objectives: The aim of this study was to create an extracorporeal circulation system (hereinafter, the circulation system) for dialysis machines so that it sets off five types of alarms for: 1) decreased arterial pressure, 2) increased arterial pressure, 3) decreased venous pressure, 4) increased venous pressure, and 5) blood leakage, according to the five types of accidents chosen based on their frequency of occurrence and the degree of severity. Materials and Methods: In order to verify the alarm from the dialysis apparatus connected to the circulation system and the accident corresponding to it, an evaluation of the alarm for its reproducibility of an accident was performed under normal treatment circumstances. The method involved testing whether the dialysis apparatus raised the desired alarm from the moment of control of the circulation system, and measuring the time it took until the desired alarm was activated. This was tested on five main models from four dialyzer manufacturers that are currently used in Japan. Results: The results of the tests demonstrated successful activation of the alarms by the dialysis apparatus, which were appropriate for each of the five types of accidents. The time between the control of the circulatory system to the alarm signal was as follows, 1) venous pressure lower limit alarm: 7 seconds; 2) venous pressure lower limit: 8 seconds; 3) venous pressure upper limit: 7 seconds; 4) venous pressure lower limit alarm: 2 seconds; and 5) blood leakage alarm: 19 seconds. All alarms were set off in under 20 seconds. Conclusions: Thus, we can conclude that a simulator system using an extracorporeal

Guidelines for system modeling: pre-accident human errors, rev.0

Energy Technology Data Exchange (ETDEWEB)

Kang, Dae Il; Jung, W. D.; Lee, Y. H.; Hwang, M. J.; Yang, J. E

2004-01-01

The evaluation results of Human Reliability Analysis (HRA) of pre-accident human errors in the probabilistic safety assessment (PSA) for the Korea Standard Nuclear Power Plant (KSNP) using the ASME PRA standard show that more than 50% of 10 items to be improved are related to the identification and screening analysis for them. Thus, we developed a guideline for modeling pre-accident human errors for the system analyst to resolve some items to be improved for them. The developed guideline consists of modeling criteria for the pre-accident human errors (identification, qualitative screening, and common restoration errors) and detailed guidelines for pre-accident human errors relating to testing, maintenance, and calibration works of nuclear power plants (NPPs). The system analyst use the developed guideline and he or she applies it to the system which he or she takes care of. The HRA analyst review the application results of the system analyst. We applied the developed guideline to the auxiliary feed water system of the KSNP to show the usefulness of it. The application results of the developed guideline show that more than 50% of the items to be improved for pre-accident human errors of auxiliary feed water system are resolved. The guideline for modeling pre-accident human errors developed in this study can be used for other NPPs as well as the KSNP. It is expected that both use of the detailed procedure, to be developed in the future, for the quantification of pre-accident human errors and the guideline developed in this study will greatly enhance the PSA quality in the HRA of pre-accident human errors.

Guidelines for system modeling: pre-accident human errors, rev.0

International Nuclear Information System (INIS)

Kang, Dae Il; Jung, W. D.; Lee, Y. H.; Hwang, M. J.; Yang, J. E.

2004-01-01

The evaluation results of Human Reliability Analysis (HRA) of pre-accident human errors in the probabilistic safety assessment (PSA) for the Korea Standard Nuclear Power Plant (KSNP) using the ASME PRA standard show that more than 50% of 10 items to be improved are related to the identification and screening analysis for them. Thus, we developed a guideline for modeling pre-accident human errors for the system analyst to resolve some items to be improved for them. The developed guideline consists of modeling criteria for the pre-accident human errors (identification, qualitative screening, and common restoration errors) and detailed guidelines for pre-accident human errors relating to testing, maintenance, and calibration works of nuclear power plants (NPPs). The system analyst use the developed guideline and he or she applies it to the system which he or she takes care of. The HRA analyst review the application results of the system analyst. We applied the developed guideline to the auxiliary feed water system of the KSNP to show the usefulness of it. The application results of the developed guideline show that more than 50% of the items to be improved for pre-accident human errors of auxiliary feed water system are resolved. The guideline for modeling pre-accident human errors developed in this study can be used for other NPPs as well as the KSNP. It is expected that both use of the detailed procedure, to be developed in the future, for the quantification of pre-accident human errors and the guideline developed in this study will greatly enhance the PSA quality in the HRA of pre-accident human errors

Severe accident tests and development of domestic severe accident system codes

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

According to lessons learned from Fukushima-Daiichi NPS accidents, the safety evaluation will be started based on the NRA's New Safety Standards. In parallel with this movement, reinforcement of Severe Accident (SA) Measures and Accident Managements (AMs) has been undertaken and establishments of relevant regulations and standards are recognized as urgent subjects. Strengthening responses against nuclear plant hazards, as well as realistic protection measures and their standardization is also recognized as urgent subjects. Furthermore, decommissioning of Fukushima-Daiichi Unit1 through Unit4 is promoted diligently. Taking into account JNES's mission with regard to these SA Measures, AMs and decommissioning, movement of improving SA evaluation methodologies inside and outside Japan, and prioritization of subjects based on analyses of sequences of Fukushima-Daiichi NPS accidents, three viewpoints was extracted. These viewpoints were substantiated as the following three groups of R and D subjects: (1) Obtaining near term experimental subjects: Containment venting, Seawater injection, Iodine behaviors. (2) Obtaining mid and long experimental subjects: Fuel damage behavior at early phase of core degradation, Core melting and debris formation. (3) Development of a macroscopic level SA code for plant system behaviors and a mechanistic level code for core melting and debris formation. (author)

Severe accident tests and development of domestic severe accident system codes

International Nuclear Information System (INIS)

2013-01-01

According to lessons learned from Fukushima-Daiichi NPS accidents, the safety evaluation will be started based on the NRA's New Safety Standards. In parallel with this movement, reinforcement of Severe Accident (SA) Measures and Accident Managements (AMs) has been undertaken and establishments of relevant regulations and standards are recognized as urgent subjects. Strengthening responses against nuclear plant hazards, as well as realistic protection measures and their standardization is also recognized as urgent subjects. Furthermore, decommissioning of Fukushima-Daiichi Unit1 through Unit4 is promoted diligently. Taking into account JNES's mission with regard to these SA Measures, AMs and decommissioning, movement of improving SA evaluation methodologies inside and outside Japan, and prioritization of subjects based on analyses of sequences of Fukushima-Daiichi NPS accidents, three viewpoints was extracted. These viewpoints were substantiated as the following three groups of R and D subjects: (1) Obtaining near term experimental subjects: Containment venting, Seawater injection, Iodine behaviors. (2) Obtaining mid and long experimental subjects: Fuel damage behavior at early phase of core degradation, Core melting and debris formation. (3) Development of a macroscopic level SA code for plant system behaviors and a mechanistic level code for core melting and debris formation. (author)

Detection of criticality accidents. The Intertechnique EDAC II system

International Nuclear Information System (INIS)

Prigent, R.

1991-01-01

The chief aim of the new generation of EDAC II criticality accidents detection system is to reduce the risks associated to the handling of fissile material by providing a swift and safe warning of the development of any criticality accident. To this function already devolving on the EDAC system of the previous generation, the EDAC II adds the possibility of storing in memory the characteristics of the accident, providing a daily follow-up of the striking events in the system through the print-out of a log book and providing assistance to the operators during the periodical tests. (Author)

Chernobyl - system accident or human error?

International Nuclear Information System (INIS)

Stang, E.

1996-01-01

Did human error cause the Chernobyl disaster? The standard point of view is that operator error was the root cause of the disaster. This was also the view of the Soviet Accident Commission. The paper analyses the operator errors at Chernobyl in a system context. The reactor operators committed errors that depended upon a lot of other failures that made up a complex accident scenario. The analysis is based on Charles Perrow's analysis of technological disasters. Failure possibility is an inherent property of high-risk industrial installations. The Chernobyl accident consisted of a chain of events that were both extremely improbable and difficult to predict. It is not reasonable to put the blame for the disaster on the operators. (author)

Review of current status for designing severe accident management support system

Energy Technology Data Exchange (ETDEWEB)

Jeong, Kwang Sub

2000-05-01

The development of operator support system (OSS) is ongoing in many other countries due to the complexity both in design and in operation for nuclear power plant. The computerized operator support system includes monitoring of some critical parameters, early detection of plant transient, monitoring of component status, plant maintenance, and safety parameter display, and the operator support system for these areas are developed and are being used in some plants. Up to now, the most operator support system covers the normal operation, abnormal operation, and emergency operation. Recently, however, the operator support system for severe accident is to be developed in some countries. The study for the phenomena of severe accident is not performed sufficiently, but, based on the result up to now, the operator support system even for severe accident will be developed in this study. To do this, at first, the current status of the operator support system for normal/abnormal/emergency operation is reviewed, and the positive aspects and negative aspects of systems are analyzed by their characteristics. And also, the major items that should be considered in designing the severe accident operator support system are derived from the review. With the survey of domestic and foreign operator support systems, they are reviewed in terms of the safety parameter display system, decision-making support system, and procedure-tracking system. For the severe accident, the severe accident management guideline (SAMG) which is developed by Westinghouse is reviewed; the characteristics, structure, and logical flow of SAMG are studied. In addition, the critical parameters for severe accident, which are the basis for operators decision-making in severe accident management and are supplied to the operators and the technical support center, are reviewed, too.

Review of current status for designing severe accident management support system

International Nuclear Information System (INIS)

Jeong, Kwang Sub

2000-05-01

The development of operator support system (OSS) is ongoing in many other countries due to the complexity both in design and in operation for nuclear power plant. The computerized operator support system includes monitoring of some critical parameters, early detection of plant transient, monitoring of component status, plant maintenance, and safety parameter display, and the operator support system for these areas are developed and are being used in some plants. Up to now, the most operator support system covers the normal operation, abnormal operation, and emergency operation. Recently, however, the operator support system for severe accident is to be developed in some countries. The study for the phenomena of severe accident is not performed sufficiently, but, based on the result up to now, the operator support system even for severe accident will be developed in this study. To do this, at first, the current status of the operator support system for normal/abnormal/emergency operation is reviewed, and the positive aspects and negative aspects of systems are analyzed by their characteristics. And also, the major items that should be considered in designing the severe accident operator support system are derived from the review. With the survey of domestic and foreign operator support systems, they are reviewed in terms of the safety parameter display system, decision-making support system, and procedure-tracking system. For the severe accident, the severe accident management guideline (SAMG) which is developed by Westinghouse is reviewed; the characteristics, structure, and logical flow of SAMG are studied. In addition, the critical parameters for severe accident, which are the basis for operators decision-making in severe accident management and are supplied to the operators and the technical support center, are reviewed, too

Development of an Accident Reproduction Simulator System Using a Hemodialysis Extracorporeal Circulation System

OpenAIRE

Nishite, Yoshiaki; Takesawa, Shingo

2016-01-01

Background Accidents that occur during dialysis treatment are notified to the medical staff via alarms raised by the dialysis apparatus. Similar to such real accidents, apparatus activation or accidents can be reproduced by simulating a treatment situation. An alarm that corresponds to such accidents can be utilized in the simulation model. Objectives The aim of this study was to create an extracorporeal circulation system (herein...

An improved sampling system installed for reprocessing

International Nuclear Information System (INIS)

Finsterwalder, L.; Zeh, H.

1979-03-01

Sampling devices are needed for taking representative samples from individual process containers during the reprocessing of irradiated fuel. The aqueous process stream in a reprocessing plant frequently contains, in addition to the dissolved radioactive materials, more or less small quantities of solid matter fraction of fuel material still remaining undissolved, insoluble fission-, corrosion-, or degradation products as well, in exceptional cases, ion exchange resin or silica gel. The solid matter is deposited partly on the upper surfaces of the sampling system and the radiation due to this makes maintenance and repair of the sampler more difficult. The purpose of the development work was to reduce the chance of accident and the maintenance costs and to lower the radiation exposure of the personnel. A new sampling system was developed and is described. (author)

Limitations of systemic accident analysis methods

Directory of Open Access Journals (Sweden)

Casandra Venera BALAN

2016-12-01

Full Text Available In terms of system theory, the description of complex accidents is not limited to the analysis of the sequence of events / individual conditions, but highlights nonlinear functional characteristics and frames human or technical performance in relation to normal functioning of the system, in safety conditions. Thus, the research of the system entities as a whole is no longer an abstraction of a concrete situation, but an exceeding of the theoretical limits set by analysis based on linear methods. Despite the issues outlined above, the hypothesis that there isn’t a complete method for accident analysis is supported by the nonlinearity of the considered function or restrictions, imposing a broad vision of the elements introduced in the analysis, so it can identify elements corresponding to nominal parameters or trigger factors.

Severe Accident Management System On-line Network SAMSON

International Nuclear Information System (INIS)

Silverman, Eugene B.

2004-01-01

SAMSON is a computational tool used by accident managers in the Technical Support Centers (TSC) and Emergency Operations Facilities (EOF) in the event of a nuclear power plant accident. SAMSON examines over 150 status points monitored by nuclear power plant process computers during a severe accident and makes predictions about when core damage, support plate failure, and reactor vessel failure will occur. These predictions are based on the current state of the plant assuming that all safety equipment not already operating will fail. SAMSON uses expert systems, as well as neural networks trained with the back propagation learning algorithms to make predictions. Training on data from an accident analysis code (MAAP - Modular Accident Analysis Program) allows SAMSON to associate different states in the plant with different times to critical failures. The accidents currently recognized by SAMSON include steam generator tube ruptures (SGTRs), with breaks ranging from one tube to eight tubes, and loss of coolant accidents (LOCAs), with breaks ranging from 0.0014 square feet (1.30 cm 2 ) in size to breaks 3.0 square feet in size (2800 cm 2 ). (author)

[A monitoring system for work-related accidents in Piracicaba, São Paulo, Brazil].

Science.gov (United States)

Cordeiro, Ricardo; Vilela, Rodolfo Andrade Gouveia; de Medeiros, Maria Angélica Tavares; Gonçalves, Cláudia Giglio de Oliveira; Bragantini, Clarice Aparecida; Varolla, Antenor J; Celso, Stephan

2005-01-01

The authors report on the development of a work accident monitoring system in Piracicaba, São Paulo State, Brazil, with the following characteristics: information feeding the system is obtained in real time directly from accident treatment centers; the system has universal monitoring, covering all work-related accidents in Piracicaba, regardless of the nature of the worker's employment conditions, place of work, or place of residence; health surveillance and promotion of health initiatives are triggered by identification of sentinel events; spatial distribution analysis of work-related accidents is a basic tool in designing accident awareness strategies and accident prevention policies. The system was implemented in November 2003 and by October 2004 had identified 5,320 work-related accidents, or a 3.8% annual proportional incidence of work-related accidents in the municipal area. We illustrate spatial analysis of registered work-related accidents and present a detailed investigation of one example of a serious accident.

System 80+ design features for severe accident prevention and mitigation

International Nuclear Information System (INIS)

Jacob, M.C.; Schneider, R.E.; Finnicum, D.J.

1993-01-01

ABB-CE, in cooperation with the US Department of Energy, is working to develop and certify the System 80+ design, which is ABB-CE's standardized evolutionary Advanced Light Water Reactor (ALWR) design. It incorporates design enhancements based on Probabilistic Risk Assessment (PRA) insights, guidance from the EPRI's Utility Requirements Document, and US NRC's Severe Accident Policy. Major severe accident prevention and mitigation design features of the system is discussed along with its conformance to EPRI URD guidance, as applicable. Computer simulation of a best estimate severe accident scenario is presented to illustrate the acceptable containment performance of the design. It is concluded that by considering severe accident prevention and mitigation early in the design process, the System 80+ design represents a robust plant design that has low core damage frequencies, low containment conditional failure probabilities, and acceptable deterministic containment performance under severe accident conditions

Aerospace Accident - Injury Autopsy Data System -

Data.gov (United States)

Department of Transportation — The Aerospace Accident Injury Autopsy Database System will provide the Civil Aerospace Medical Institute (CAMI) Aerospace Medical Research Team (AMRT) the ability to...

A severe accident analysis for the system-integrated modular advanced reactor

International Nuclear Information System (INIS)

Jung, Gunhyo; Jae, Moosung

2015-01-01

The System-Integrated Modular Advanced Reactor (SMART) that has been recently designed in KOREA and has acquired standard design certification from the nuclear power regulatory body (NSSC) is an integral type reactor with 330MW thermal power. It is a small sized reactor in which the core, steam generator, pressurizer, and reactor coolant pump that are in existing pressurized light water reactors are designed to be within a pressure vessel without any separate pipe connection. In addition, this reactor has much different design characteristics from existing pressurized light water reactors such as the adoption of a passive residual heat removal system and a cavity flooding system. Therefore, the safety of the SMART against severe accidents should be checked through severe accident analysis reflecting the design characteristics of the SMART. For severe accident analysis, an analysis model has been developed reflecting the design information presented in the standard design safety analysis report. The severe accident analysis model has been developed using the MELCOR code that is widely used to evaluate pressurized LWR severe accidents. The steady state accident analysis model for the SMART has been simulated. According to the analysis results, the developed model reflecting the design of the SMART is found to be appropriate. Severe accident analysis has been performed for the representative accident scenarios that lead to core damage to check the appropriateness of the severe accident management plan for the SMART. The SMART has been shown to be safe enough to prevent severe accidents by utilizing severe accident management systems such as a containment spray system, a passive hydrogen recombiner, and a cavity flooding system. In addition, the SMART is judged to have been technically improved remarkably compared to existing PWRs. The SMART has been designed to have a larger reactor coolant inventory compared to its core's thermal power, a large surface area in

Supporting system in emergency response plan for nuclear material transport accidents

International Nuclear Information System (INIS)

Nakagome, Y.; Aoki, S.

1993-01-01

As aiming to provide the detailed information concerning nuclear material transport accidents and to supply it to the concerned organizations by an online computer, the Emergency Response Supporting System has been constructed in the Nuclear Safety Technology Center, Japan. The system consists of four subsystems and four data bases. By inputting initial information such as name of package and date of accident, one can obtain the appropriate initial response procedures and related information for the accident immediately. The system must be useful for protecting the public safety from nuclear material transport accidents. But, it is not expected that the system shall be used in future. (J.P.N.)

A database system for the management of severe accident risk information, SARD

International Nuclear Information System (INIS)

Ahn, K. I.; Kim, D. H.

2003-01-01

The purpose of this paper is to introduce main features and functions of a PC Windows-based database management system, SARD, which has been developed at Korea Atomic Energy Research Institute for automatic management and search of the severe accident risk information. Main functions of the present database system are implemented by three closely related, but distinctive modules: (1) fixing of an initial environment for data storage and retrieval, (2) automatic loading and management of accident information, and (3) automatic search and retrieval of accident information. For this, the present database system manipulates various form of the plant-specific severe accident risk information, such as dominant severe accident sequences identified from the plant-specific Level 2 Probabilistic Safety Assessment (PSA) and accident sequence-specific information obtained from the representative severe accident codes (e.g., base case and sensitivity analysis results, and summary for key plant responses). The present database system makes it possible to implement fast prediction and intelligent retrieval of the required severe accident risk information for various accident sequences, and in turn it can be used for the support of the Level 2 PSA of similar plants and for the development of plant-specific severe accident management strategies

A database system for the management of severe accident risk information, SARD

Energy Technology Data Exchange (ETDEWEB)

Ahn, K. I.; Kim, D. H. [KAERI, Taejon (Korea, Republic of)

2003-10-01

The purpose of this paper is to introduce main features and functions of a PC Windows-based database management system, SARD, which has been developed at Korea Atomic Energy Research Institute for automatic management and search of the severe accident risk information. Main functions of the present database system are implemented by three closely related, but distinctive modules: (1) fixing of an initial environment for data storage and retrieval, (2) automatic loading and management of accident information, and (3) automatic search and retrieval of accident information. For this, the present database system manipulates various form of the plant-specific severe accident risk information, such as dominant severe accident sequences identified from the plant-specific Level 2 Probabilistic Safety Assessment (PSA) and accident sequence-specific information obtained from the representative severe accident codes (e.g., base case and sensitivity analysis results, and summary for key plant responses). The present database system makes it possible to implement fast prediction and intelligent retrieval of the required severe accident risk information for various accident sequences, and in turn it can be used for the support of the Level 2 PSA of similar plants and for the development of plant-specific severe accident management strategies.

Development of Information Display System for Operator Support in Severe Accident

International Nuclear Information System (INIS)

Jeong, Kwang Il; Lee, Joon Ku

2016-01-01

When the severe accident occurs, the technical support center (TSC) performs the mitigation strategy with severe accident management guidelines (SAMG) and communicates with main control room (MCR) operators to obtain information of plant's status. In such circumstances, the importance of an information display for severe accident is increased. Therefore an information display system dedicated to severe accident conditions is required to secure the plant information, to provide the necessary information to MCR operators and TSC operators, and to support the decision using these information. We setup the design concept of severe accident information display system (SIDS) in the previous study and defined its requirements of function and performance. This paper describes the process, results of the identification of the severe accident information for MCR operator and the implementation of SIDS. Further implementation on post-accident monitoring function and data validation function for severe accidents will be accomplished in the future

The JCO criticality accident at Tokai-mura, Japan: an overview of the sampling campaign and preliminary results

International Nuclear Information System (INIS)

Komura, K.; Yamamoto, M.; Muroyama, T.; Murata, Y.; Nakanishi, T.; Hoshi, M.; Takada, J.; Ishikawa, M.; Takeoka, S.; Kitagawa, K.; Suga, S.; Endo, S.; Tosaki, N.; Mitsugashira, T.; Hara, M.; Hashimoto, T.; Takano, M.; Yanagawa, Y.; Tsuboi, T.; Ichimasa, M.; Ichimasa, Y.; Imura, H.; Sasajima, E.; Seki, R.; Saito, Y.; Kondo, M.; Kojima, S.; Muramatsu, Y.; Yoshida, S.; Shibata, S.; Yonehara, H.; Watanabe, Y.; Kimura, S.; Shiraishi, K.; Ban-nai, T.; Sahoo, S.K.; Igarashi, Y.; Aoyama, M.; Hirose, K.; Uehiro, T.; Doi, T.; Tanaka, A.; Matsuzawa, T.

2000-01-01

A criticality accident occurred on September 30, 1999 at the uranium conversion facility of the JCO Company Ltd. in Tokai-mura, Japan. A collaborating scientific investigation team was organized in two groups, the first to carry out research on the environmental impact (the environmental research group) and the second to assess the radiation effects on residents (the biological research group). This report concerns only the activities of the environmental research group. Four investigative teams were sent on different dates to the accident site and its vicinity to collect samples. About 400 samples were collected and subjected to analysis. An outline of the sampling campaign is presented here along with a brief chronology of the accident and the preliminary key results obtained by the independent research group are summarised in this Special Issue of the Journal of Environmental Radioactivity

Post-accident monitoring systems in Prototype Fast Breeder Reactor

International Nuclear Information System (INIS)

Suriya Murthy, N.; Sivasailanathan, Vidhya; Ananth, Allu; Roy, Kallol

2018-01-01

PFBR is a 500 MW(e) MOX fueled and sodium cooled fast reactor (SFR) under advanced stage of commissioning at Kalpakkam. Currently, the main vessel is preheated and sodium has been charged into two secondary loops that are operated in recirculation mode. In order to characterize the radiation field and contamination, the workplace monitoring is undertaken using installed monitors that are commissioned and made operational. This helps to ensure radiological protection during normal operating conditions. On the other hand, radiological monitoring in emergency conditions is quite different. For undertaking the mitigative accident management, a set of specialized nuclear instruments called post-accident monitoring systems (PAMS) which include radiation monitors are stipulated. The Fukushima Daiichi accident emphasized the importance and need for reliable accident monitoring instrumentation to indicate the safety functions during the progression and aftermath of accident in NPP. In PFBR, the PAMS are integrated with other monitoring systems in design stage itself to manage the measurements and indicating the safety functions for implementing EOP and SAMG

Noble gas control room accident filtration system for severe accident conditions (N-CRAFT)

International Nuclear Information System (INIS)

Hill, Axel; Stiepani, Cristoph; Drechsler, Michael

2015-01-01

Severe accidents might cause the release of airborne radioactive substances to the environment of the NPP either due to containment leakages or due to intentional filtered containment venting. In the latter case aerosols and iodine are retained, however noble gases are not retainable by the FCVS or by conventional air filtration systems like HEPA filters and iodine absorbers. Radioactive noble gases nevertheless dominate the activity release depending on the venting procedure and the weather conditions. To prevent unacceptable contamination of the control room atmosphere by noble gases, AREVA GmbH has developed a noble gas control room accident filtration system (CRAFT) which can supply purified fresh air to the control room without time limitation. The retention process is based on dynamic adsorption of noble gases on activated carbon. The system consists of delay lines (carbon columns) which are operated by a continuous and simultaneous adsorption and desorption process. CRAFT allows minimization of the dose rate inside the control room and ensures low radiation exposure to the staff by maintaining the control room environment suitable for prolonged occupancy throughout the duration of the accident. CRAFT consists of a proven modular design either transportable or permanently installed. (author)

Aspects of severe accidents in transmutation systems

International Nuclear Information System (INIS)

Wider, H.U.; Karlson, J.; Jones, A.V.

2001-01-01

The different types of transmutation systems under investigation include accelerator driven (ADS) and critical systems. To switch off an accelerator in case of an accident initiation is quite important for all accidents. For a fast ADS the grace times available for doing so depend strongly on the total heat capacity and the natural circulation capability of the primary coolant. Cooling with heavy metal Pb-Bi has considerable advantages in this regard compared to gas cooling. Moreover it allows passive ex-vessel cooling with natural air or water circulation. In the remote likelihood of fuel melting, oxide fuel appears to mix with the Pb-Bi coolant. Fast critical systems that are cooled by Pb-Bi will automatically shut off if the flow or heat sink is lost. Reactivity accidents can be limited by a low total control rod worth. High temperature reactors can achieve only incomplete burning of actinides. If an accelerator is added to increase burn-up, a fast spectrum region is needed, which has a low heat capacity. (author)

Development of Information Display System for Operator Support in Severe Accident

Energy Technology Data Exchange (ETDEWEB)

Jeong, Kwang Il; Lee, Joon Ku [KAERI, Daejeon (Korea, Republic of)

2016-05-15

When the severe accident occurs, the technical support center (TSC) performs the mitigation strategy with severe accident management guidelines (SAMG) and communicates with main control room (MCR) operators to obtain information of plant's status. In such circumstances, the importance of an information display for severe accident is increased. Therefore an information display system dedicated to severe accident conditions is required to secure the plant information, to provide the necessary information to MCR operators and TSC operators, and to support the decision using these information. We setup the design concept of severe accident information display system (SIDS) in the previous study and defined its requirements of function and performance. This paper describes the process, results of the identification of the severe accident information for MCR operator and the implementation of SIDS. Further implementation on post-accident monitoring function and data validation function for severe accidents will be accomplished in the future.

Accident Sequence Precursor Analysis for SGTR by Using Dynamic PSA Approach

International Nuclear Information System (INIS)

Lee, Han Sul; Heo, Gyun Young; Kim, Tae Wan

2016-01-01

In order to address this issue, this study suggests the sequence tree model to analyze accident sequence systematically. Using the sequence tree model, all possible scenarios which need a specific safety action to prevent the core damage can be identified and success conditions of safety action under complicated situation such as combined accident will be also identified. Sequence tree is branch model to divide plant condition considering the plant dynamics. Since sequence tree model can reflect the plant dynamics, arising from interaction of different accident timing and plant condition and from the interaction between the operator action, mitigation system, and the indicators for operation, sequence tree model can be used to develop the dynamic event tree model easily. Target safety action for this study is a feed-and-bleed (F and B) operation. A F and B operation directly cools down the reactor cooling system (RCS) using the primary cooling system when residual heat removal by the secondary cooling system is not available. In this study, a TLOFW accident and a TLOFW accident with LOCA were the target accidents. Based on the conventional PSA model and indicators, the sequence tree model for a TLOFW accident was developed. Based on the results of a sampling analysis and data from the conventional PSA model, the CDF caused by Sequence no. 26 can be realistically estimated. For a TLOFW accident with LOCA, second accident timings were categorized according to plant condition. Indicators were selected as branch point using the flow chart and tables, and a corresponding sequence tree model was developed. If sampling analysis is performed, practical accident sequences can be identified based on the sequence analysis. If a realistic distribution for the variables can be obtained for sampling analysis, much more realistic accident sequences can be described. Moreover, if the initiating event frequency under a combined accident can be quantified, the sequence tree model

System response of a DOE Defense Program package in a transportation accident environment

International Nuclear Information System (INIS)

Chen, T.F.; Hovingh, J.; Kimura, C.Y.

1992-01-01

The system response in a transportation accident environment is an element to be considered in an overall Transportation System Risk Assessment (TSRA) framework. The system response analysis uses the accident conditions and the subsequent accident progression analysis to develop the accident source term, which in turn, is used in the consequence analysis. This paper proposes a methodology for the preparation of the system response aspect of the TSRA

The effect of system modeling on the Fukushima accident evolution

Energy Technology Data Exchange (ETDEWEB)

Herranz, L.E.; Fontanet, J.; López, C.; Fernández, E.

2015-07-01

The Fukushima accident is becoming both a unique opportunity and a huge challenge for severe accident analysis. The OECD-BSAF project has articulated a good part of the modeling efforts conducted so far. Inside this project, CIEMAT has conducted forensic analyses of the Fukushima accident in units 1 through 3 with MELCOR 2.1 and it has postulated a set of accident scenarios consistent with data. Beyond specific results, sensitivity analyses on safety systems performance and prevailing boundary conditions have highlighted the need of conducting uncertainty analyses when modeling NPPs severe accident scenarios. (Author)

Design and Development of a Severe Accident Training System

International Nuclear Information System (INIS)

Kim, Ko Ryu; Park, Sun Hee; Kim, Dong Ha

2005-01-01

The nuclear plants' severe accidents have two big characteristics. One is that they are very rare accidents, and the other is that they bring extreme conditions such as the high pressure and temperature in their process. It is, therefore, very hard to get the severe accident data, without inquiring that the data should be real or experimental. In fact, most of severe accident analyses rely on the simulation codes where almost all severe accident knowledge is contained. These codes are, however, programmed by the Fortran language, so that their output are typical text files which are very complicated. To avoid this kind of difficulty in understanding the code output data, several kinds of graphic user interface (GUI) programs could be developed. In this paper, we will introduce a GUI system for severe accident management and training, partly developed and partly in design stage

A Review of Accident Modelling Approaches for Complex Critical Sociotechnical Systems

National Research Council Canada - National Science Library

Qureshi, Zahid H

2008-01-01

.... This report provides a review of key traditional accident modelling approaches and their limitations, and describes new system-theoretic approaches to the modelling and analysis of accidents in safety-critical systems...

Cognitive systems engineering analysis of the JCO criticality accident

International Nuclear Information System (INIS)

Tanabe, Fumiya; Yamaguchi, Yukichi

2000-01-01

The JCO Criticality Accident is analyzed with a framework based on cognitive systems engineering. With the framework, analysis is conducted integrally both from the system viewpoint and actors viewpoint. The occupational chemical risk was important as safety constraint for the actors as well as the nuclear risk, which is due to criticality accident, to the public and to actors. The inappropriate actor's mental model of the work system played a critical role and several factors (e.g. poor training and education, lack of information on criticality safety control in the procedures and instructions, and lack of warning signs at workplace) contributed to form and shape the mental model. Based on the analysis, several countermeasures, such as warning signs, information system for supporting actors and improved training and education, are derived to prevent such an accident. (author)

Systemic accident analysis: examining the gap between research and practice.

Science.gov (United States)

Underwood, Peter; Waterson, Patrick

2013-06-01

The systems approach is arguably the dominant concept within accident analysis research. Viewing accidents as a result of uncontrolled system interactions, it forms the theoretical basis of various systemic accident analysis (SAA) models and methods. Despite the proposed benefits of SAA, such as an improved description of accident causation, evidence within the scientific literature suggests that these techniques are not being used in practice and that a research-practice gap exists. The aim of this study was to explore the issues stemming from research and practice which could hinder the awareness, adoption and usage of SAA. To achieve this, semi-structured interviews were conducted with 42 safety experts from ten countries and a variety of industries, including rail, aviation and maritime. This study suggests that the research-practice gap should be closed and efforts to bridge the gap should focus on ensuring that systemic methods meet the needs of practitioners and improving the communication of SAA research. Copyright © 2013 Elsevier Ltd. All rights reserved.

Research on sever accident emergency simulation system for CPR1000

International Nuclear Information System (INIS)

Yang Zhifei; Liao Yehong; Liang Manchun; Li Ke; Yang Jie; Chen Yali

2015-01-01

The enhanced capability to nuclear power plant (NPP) severe accident management and emergency response depends heavily on exercises. Since the exercise scene is usually monotonous and not realistic, and conduct of exercise has a high cost, the effect of enhancing the capability is limited. Thus, the development of a Sever Accident Emergency Simulation System (SAESS) is necessary. SAESS is able to connect NPP simulator, and simulates the process of severe accident management, personnel evacuation, the dispersion of radioactive plume, and emergency response of emergency organizations. The system helps to design several of exercise scenes and optimize the disposal strategy in different severe accidents. In addition, the system reduces the cost of emergency exercise by computer simulation, benefits the research of exercise, increases the efficiency of exercise and enhances the emergency decision-making capability. This paper introduces the design and application of SAESS. (author)

Sequence Tree Modeling for Combined Accident and Feed-and-Bleed Operation

International Nuclear Information System (INIS)

Kim, Bo Gyung; Kang Hyun Gook; Yoon, Ho Joon

2016-01-01

In order to address this issue, this study suggests the sequence tree model to analyze accident sequence systematically. Using the sequence tree model, all possible scenarios which need a specific safety action to prevent the core damage can be identified and success conditions of safety action under complicated situation such as combined accident will be also identified. Sequence tree is branch model to divide plant condition considering the plant dynamics. Since sequence tree model can reflect the plant dynamics, arising from interaction of different accident timing and plant condition and from the interaction between the operator action, mitigation system, and the indicators for operation, sequence tree model can be used to develop the dynamic event tree model easily. Target safety action for this study is a feed-and-bleed (F and B) operation. A F and B operation directly cools down the reactor cooling system (RCS) using the primary cooling system when residual heat removal by the secondary cooling system is not available. In this study, a TLOFW accident and a TLOFW accident with LOCA were the target accidents. Based on the conventional PSA model and indicators, the sequence tree model for a TLOFW accident was developed. If sampling analysis is performed, practical accident sequences can be identified based on the sequence analysis. If a realistic distribution for the variables can be obtained for sampling analysis, much more realistic accident sequences can be described. Moreover, if the initiating event frequency under a combined accident can be quantified, the sequence tree model can translate into a dynamic event tree model based on the sampling analysis results

Sequence Tree Modeling for Combined Accident and Feed-and-Bleed Operation

Energy Technology Data Exchange (ETDEWEB)

Kim, Bo Gyung; Kang Hyun Gook [KAIST, Daejeon (Korea, Republic of); Yoon, Ho Joon [Khalifa University of Science, Abu Dhabi (United Arab Emirates)

2016-05-15

In order to address this issue, this study suggests the sequence tree model to analyze accident sequence systematically. Using the sequence tree model, all possible scenarios which need a specific safety action to prevent the core damage can be identified and success conditions of safety action under complicated situation such as combined accident will be also identified. Sequence tree is branch model to divide plant condition considering the plant dynamics. Since sequence tree model can reflect the plant dynamics, arising from interaction of different accident timing and plant condition and from the interaction between the operator action, mitigation system, and the indicators for operation, sequence tree model can be used to develop the dynamic event tree model easily. Target safety action for this study is a feed-and-bleed (F and B) operation. A F and B operation directly cools down the reactor cooling system (RCS) using the primary cooling system when residual heat removal by the secondary cooling system is not available. In this study, a TLOFW accident and a TLOFW accident with LOCA were the target accidents. Based on the conventional PSA model and indicators, the sequence tree model for a TLOFW accident was developed. If sampling analysis is performed, practical accident sequences can be identified based on the sequence analysis. If a realistic distribution for the variables can be obtained for sampling analysis, much more realistic accident sequences can be described. Moreover, if the initiating event frequency under a combined accident can be quantified, the sequence tree model can translate into a dynamic event tree model based on the sampling analysis results.

A System Supporting the Analysis of Motorway Traffic Accidents

Directory of Open Access Journals (Sweden)

Davide Anghinolfi

2015-12-01

Full Text Available This work presents a business intelligence tool for monitoring traffic accidents on motorways and supporting decisions relevant to road safety. The system manages information on road characteristics, traffic accidents and traffic volumes and produces reports for monitoring the evolution of key performance indicators for road safety, supporting decisions on actions for risk mitigation and safety improvements for road users. The paper illustrates the different types of analyses performed by the system. Pattern based analysis is used to evaluate safety performance indicators for the road sections matching defined patterns. Two different road segmentation algorithms, used to identify the most critical road sections according to various severity indicators, are presented and discussed. Differential analysis compares the value of selected severity indicators before and after the implementation of an intervention on a road. Finally, a graphical user interface allows the accident locations to be visualized and accidents with specific characteristics to be highlighted. The system was evaluated on the data collected between 2009 and 2011 for the A15 motorway in Italy, connecting Parma to La Spezia.

Methods for air cleaning system design and accident analysis

International Nuclear Information System (INIS)

Gregory, W.S.; Nichols, B.D.

1987-01-01

This paper describes methods, in the form of a handbook and five computer codes, that can be used for nuclear facility air cleaning system design and accident analysis. Four of the codes were developed primarily at the Los Alamos National Laboratory, and one was developed in France. Tools such as these are used to design ventilation systems in the mining industry but do not seem to be commonly used in the nuclear industry. For example, the Nuclear Air Cleaning Handbook is an excellent design reference, but it fails to include information on computer codes that can be used to aid in the design process. These computer codes allow the analyst to use the handbook information to form all the elements of a complete system design. Because these analysis methods are in the form of computer codes they allow the analyst to investigate many alternative designs. In addition, the effects of many accident scenarios on the operation of the air cleaning system can be evaluated. These tools originally were intended for accident analysis, but they have been used mostly as design tools by several architect-engineering firms. The Cray, VAX, and personal computer versions of the codes, an accident analysis handbook, and the codes availability will be discussed. The application of these codes to several design operations of nuclear facilities will be illustrated, and their use to analyze the effect of several accident scenarios also will be described

Monitoring and operation system for severe accidents

International Nuclear Information System (INIS)

Fukui, Toshiki; Niida, Shinji; Kato, Yumeto

2017-01-01

Monitoring and operation system for Severe Accidents (SA-MOS) is a compact Instrumentation and Control (I and C) system developed by Mitsubishi Heavy Industries (MHI) and certificated by the Japanese Nuclear Regulatory Agency (NRA) as a design application for Japanese existing PWR nuclear power plants. The system is tailored to provide monitoring and operation for Severe Accident (SA) conditions, and consists of digitalized I and C System, Human Systems Interface (HSI) system and Power Supply (PS) system as further improvement of reliability and safety. This design plans to be applied to the next Japanese PWR plants. In accordance with the new regulatory standards that NRA has established corresponding to the Fukushima accident, a long-term Station Black Out (SBO) scenario and 24-hours power supply by the storage battery in case of SA has been required. In order to address 24-hours power supply requirement in SA condition, the storage battery volume shall be increased. However, it may be difficult to introduce additional batteries to the existing plant site because of room space constraints, etc. Therefore, power distributions for the facilities which are only used for Design Basis Accident (DBA), are shut down in order to secure 24-hours operations of facilities for SA conditions including SA-MOS. That enables efficient battery resource operations as well as optimizes room space factors shared by battery cabinets. Another benefit is to introduce dedicate HSI system for SA condition and operators shift their operations using that dedicated HSI system to cope with SA events. That can reduce operator workload which forces operators to verify or choose which controllers and indicators are available in SA conditions. Furthermore, application of SA-MOS, secures the independence of the layers (DBA⇔SA) as well as secures the plant data transfer for SA conditions outside of plant. Those plant data assets can be shared by plant operation supporting personnel and

Accident on the gas transfer system

International Nuclear Information System (INIS)

Heugel, J.

1991-10-01

An accident has happened on the Vivitron gas transfer system on the 7 th August 1991. This report presents the context, facts and inquiries, analyses the reasons and explains also how the repairing has been effected

Geographic Information System (GIS) capabilities in traffic accident information management: a qualitative approach.

Science.gov (United States)

Ahmadi, Maryam; Valinejadi, Ali; Goodarzi, Afshin; Safari, Ameneh; Hemmat, Morteza; Majdabadi, Hesamedin Askari; Mohammadi, Ali

2017-06-01

Traffic accidents are one of the more important national and international issues, and their consequences are important for the political, economical, and social level in a country. Management of traffic accident information requires information systems with analytical and accessibility capabilities to spatial and descriptive data. The aim of this study was to determine the capabilities of a Geographic Information System (GIS) in management of traffic accident information. This qualitative cross-sectional study was performed in 2016. In the first step, GIS capabilities were identified via literature retrieved from the Internet and based on the included criteria. Review of the literature was performed until data saturation was reached; a form was used to extract the capabilities. In the second step, study population were hospital managers, police, emergency, statisticians, and IT experts in trauma, emergency and police centers. Sampling was purposive. Data was collected using a questionnaire based on the first step data; validity and reliability were determined by content validity and Cronbach's alpha of 75%. Data was analyzed using the decision Delphi technique. GIS capabilities were identified in ten categories and 64 sub-categories. Import and process of spatial and descriptive data and so, analysis of this data were the most important capabilities of GIS in traffic accident information management. Storing and retrieving of descriptive and spatial data, providing statistical analysis in table, chart and zoning format, management of bad structure issues, determining the cost effectiveness of the decisions and prioritizing their implementation were the most important capabilities of GIS which can be efficient in the management of traffic accident information.

Sisifo-gas a computerised system to support severe accident training and management

International Nuclear Information System (INIS)

Castro, A.; Buedo, J.L.; Borondo, L.; Lopez, N.

2001-01-01

Nuclear Power Plants (NPP) will have to be prepared to face the management of severe accidents, through the development of Severe Accident Guides and sophisticated systems of calculation, as a supporting to the decision-making. SISIFO-GAS is a flexible computerized tool, both for the supporting to accident management and for education and training in severe accident. It is an interactive system, a visual and an easily handle one, and needs no specific knowledge in MAAP code to make complicate simulations in conditions of severe accident. The system is configured and adjusted to work in a BWR/6 technology plant with Mark III Containment, as it is Cofrentes NPP. But it is easily portable to every other kind of reactor, having the level 2 PSA (probabilistic safety analysis) of the plant to be able to establish the categories of the source term and the most important sequences in the progression of the accident. The graphic interface allows following in a very intuitive and formative way the evolution and the most relevant events in the accident, in the both system's way of work, training and management. (authors)

Evaluation of severe accident risks: Quantification of major input parameters: MAACS [MELCOR Accident Consequence Code System] input

International Nuclear Information System (INIS)

Sprung, J.L.; Jow, H-N; Rollstin, J.A.; Helton, J.C.

1990-12-01

Estimation of offsite accident consequences is the customary final step in a probabilistic assessment of the risks of severe nuclear reactor accidents. Recently, the Nuclear Regulatory Commission reassessed the risks of severe accidents at five US power reactors (NUREG-1150). Offsite accident consequences for NUREG-1150 source terms were estimated using the MELCOR Accident Consequence Code System (MACCS). Before these calculations were performed, most MACCS input parameters were reviewed, and for each parameter reviewed, a best-estimate value was recommended. This report presents the results of these reviews. Specifically, recommended values and the basis for their selection are presented for MACCS atmospheric and biospheric transport, emergency response, food pathway, and economic input parameters. Dose conversion factors and health effect parameters are not reviewed in this report. 134 refs., 15 figs., 110 tabs

The role of post accident chemistry data in nuclear safety

International Nuclear Information System (INIS)

Bradshaw, R.W.; Caruthers, G.F.

1982-01-01

The NRC instituted the NUREG-0737 requirements as implementation of the Post-TMI Action Plan in October, 1980. Among these requirements was the capability to obtain chemistry samples of the reactor coolant and containment building atmosphere under post accident conditions. The quantitative criteria were, in general, beyond the capabilities of existing plant systems. As a consequence the nuclear industry expended substantial efforts to design and install the post-accident sampling systems necessary to comply with these criteria. With such efforts essentially complete, the task remains to establish the role that data provided by these systems would play in mitigating the consequences of a nuclear plant accident. This role definition must include a characterization of the timing and priority for the post accident chemistry data. This paper defines that role using the Safety Level and Safety Function concepts as a matrix

Developing a Minimum Data Set for an Information Management System to Study Traffic Accidents in Iran.

Science.gov (United States)

Mohammadi, Ali; Ahmadi, Maryam; Gharagozlu, Alireza

2016-03-01

Each year, around 1.2 million people die in the road traffic incidents. Reducing traffic accidents requires an exact understanding of the risk factors associated with traffic patterns and behaviors. Properly analyzing these factors calls for a comprehensive system for collecting and processing accident data. The aim of this study was to develop a minimum data set (MDS) for an information management system to study traffic accidents in Iran. This descriptive, cross-sectional study was performed in 2014. Data were collected from the traffic police, trauma centers, medical emergency centers, and via the internet. The investigated resources for this study were forms, databases, and documents retrieved from the internet. Forms and databases were identical, and one sample of each was evaluated. The related internet-sourced data were evaluated in their entirety. Data were collected using three checklists. In order to arrive at a consensus about the data elements, the decision Delphi technique was applied using questionnaires. The content validity and reliability of the questionnaires were assessed by experts' opinions and the test-retest method, respectively. An (MDS) of a traffic accident information management system was assigned to three sections: a minimum data set for traffic police with six classes, including 118 data elements; a trauma center with five data classes, including 57 data elements; and a medical emergency center, with 11 classes, including 64 data elements. Planning for the prevention of traffic accidents requires standardized data. As the foundation for crash prevention efforts, existing standard data infrastructures present policymakers and government officials with a great opportunity to strengthen and integrate existing accident information systems to better track road traffic injuries and fatalities.

The computer aided education and training system for accident management

International Nuclear Information System (INIS)

Yoneyama, Mitsuru; Kubota, Ryuji; Fujiwara, Tadashi; Sakuma, Hitoshi

1999-01-01

The education and training system for Accident Management was developed by the Japanese BWR group and Hitachi Ltd. The education and training system is composed of two systems. One is computer aided instruction (CAI) education system and the education and training system with computer simulations. Both systems are designed to be executed on personal computers. The outlines of the CAI education system and the education and training system with simulator are reported below. These systems provides plant operators and technical support center staff with the effective education and training for accident management. (author)

System 80+TM PRA insights on severe accident prevention and mitigation

International Nuclear Information System (INIS)

Finnicum, D.J.; Jacob, M.C.; Schneider, R.E.; Weston, R.A.

2004-01-01

The System 80 + design is ABB-CE's standardized evolutionary Advanced Light Water Reactor (ALWR) design. It incorporates design enhancements based on Probabilistic Risk Assessment (PRA) insights, guidance from the ALWR Utility Requirements Document (URD), and US NRC's Severe Accident Policy. Major severe accident prevention and mitigation design features of the System 80 + design are described. The results of the System 80 + PRA are presented and the insights gained from the PRA sensitivity analyses are discussed. ABB-CE considered defense-in-depth for accident prevention and mitigation early in the design process and used robust design features to ensure that the System 80 + design achieved a low core damage frequency, low containment conditional failure probability, and excellent deterministic containment performance under severe accident conditions and to ensure that the risk was properly allocated among design features and between prevention and mitigation. (author)

PWR auxiliary systems, safety and emergency systems, accident analysis, operation

International Nuclear Information System (INIS)

Meyer, P.J.

1976-01-01

The author presents a description of PWR auxiliary systems like volume control, boric acid control, coolant purification, -degassing, -storage and -treatment system and waste processing systems. Residual heat removal systems, emergency systems and containment designs are discussed. As an accident analysis the author gives a survey over malfunctions and disturbances in the field of reactor operations. (TK) [de

Future Integrated Systems Concept for Preventing Aircraft Loss-of-Control Accidents

Science.gov (United States)

Belcastro, Christine M.; Jacobson, Steven r.

2010-01-01

Loss of control remains one of the largest contributors to aircraft fatal accidents worldwide. Aircraft loss-of-control accidents are highly complex in that they can result from numerous causal and contributing factors acting alone or (more often) in combination. Hence, there is no single intervention strategy to prevent these accidents. This paper presents future system concepts and research directions for preventing aircraft loss-of-control accidents.

Response of Soviet VVER-440 accident localization systems to overpressurization

International Nuclear Information System (INIS)

Kulak, R.F.; Fiala, C.; Sienicki, J.J.

1989-01-01

The Soviet designed VVER-440 model V230 and VVER-440 model V213 reactors do not use full containments to mitigate the effects of accidents. Instead, these VVER-440 units employ a sealed set of interconnected compartments, collectively called the accident localization system (ALS), to reduce the release of radionuclides to the atmosphere during accidents. Descriptions of the VVER accident localization structures may be found in the report DOE NE-0084. The objective of this paper is to evaluate the structural integrity of the VVER-440 ALS at the Soviet design pressure, and to determine their response to pressure loadings beyond the design value. Complex, three-dimensional, nonlinear, finite element models were developed to represent the major structural components of the localization systems of the VVER-440 models V230 and V213. The interior boundary of the localization system was incrementally pressurized in the calculations until the prediction of gross failure. 6 refs., 9 figs

Development of a system of computer codes for severe accident analyses and its applications

Energy Technology Data Exchange (ETDEWEB)

Chang, Soon Hong; Cheon, Moon Heon; Cho, Nam jin; No, Hui Cheon; Chang, Hyeon Seop; Moon, Sang Kee; Park, Seok Jeong; Chung, Jee Hwan [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1991-12-15

The objectives of this study is to develop a system of computer codes for postulated severe accident analyses in Nuclear Power Plants. This system of codes is necessary to conduct individual plant examination for domestic nuclear power plants. As a result of this study, one can conduct severe accident assessments more easily, and can extract the plant-specific vulnerabilities for severe accidents and at the same time the ideas for enhancing overall accident resistance. The scope and contents of this study are as follows : development of a system of computer codes for severe accident analyses, development of severe accident management strategy.

Development of a system of computer codes for severe accident analyses and its applications

International Nuclear Information System (INIS)

Chang, Soon Hong; Cheon, Moon Heon; Cho, Nam jin; No, Hui Cheon; Chang, Hyeon Seop; Moon, Sang Kee; Park, Seok Jeong; Chung, Jee Hwan

1991-12-01

The objectives of this study is to develop a system of computer codes for postulated severe accident analyses in Nuclear Power Plants. This system of codes is necessary to conduct individual plant examination for domestic nuclear power plants. As a result of this study, one can conduct severe accident assessments more easily, and can extract the plant-specific vulnerabilities for severe accidents and at the same time the ideas for enhancing overall accident resistance. The scope and contents of this study are as follows : development of a system of computer codes for severe accident analyses, development of severe accident management strategy

TMI-2 accident evaluation program sample acquisition and examination plan. Executive summary

International Nuclear Information System (INIS)

Russell, M.L.; McCardell, R.K.; Broughton, J.M.

1985-12-01

The purpose of the TMI-2 Accident Evaluation Program Sample Acquisition and Examination (TMI-2 AEP SA and E) program is to develop and implement a test and inspection plan that completes the current-condition characterization of (a) the TMI-2 equipment that may have been damaged by the core damage events and (b) the TMI-2 core fission product inventory. The characterization program includes both sample acquisitions and examinations and in-situ measurements. Fission product characterization involves locating the fission products as well as determining their chemical form and determining material association

Development of system of computer codes for severe accident analysis and its applications

Energy Technology Data Exchange (ETDEWEB)

Jang, H S; Jeon, M H; Cho, N J. and others [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1992-01-15

The objectives of this study is to develop a system of computer codes for postulated severe accident analyses in nuclear power plants. This system of codes is necessary to conduct Individual Plant Examination for domestic nuclear power plants. As a result of this study, one can conduct severe accident assessments more easily, and can extract the plant-specific vulnerabilities for severe accidents and at the same time the ideas for enhancing overall accident-resistance. Severe accident can be mitigated by the proper accident management strategies. Some operator action for mitigation can lead to more disastrous result and thus uncertain severe accident phenomena must be well recognized. There must be further research for development of severe accident management strategies utilizing existing plant resources as well as new design concepts.

Development of system of computer codes for severe accident analysis and its applications

International Nuclear Information System (INIS)

Jang, H. S.; Jeon, M. H.; Cho, N. J. and others

1992-01-01

The objectives of this study is to develop a system of computer codes for postulated severe accident analyses in nuclear power plants. This system of codes is necessary to conduct Individual Plant Examination for domestic nuclear power plants. As a result of this study, one can conduct severe accident assessments more easily, and can extract the plant-specific vulnerabilities for severe accidents and at the same time the ideas for enhancing overall accident-resistance. Severe accident can be mitigated by the proper accident management strategies. Some operator action for mitigation can lead to more disastrous result and thus uncertain severe accident phenomena must be well recognized. There must be further research for development of severe accident management strategies utilizing existing plant resources as well as new design concepts

A systems approach to the management of radiation accidents

International Nuclear Information System (INIS)

Richter, L.L.; Berk, H.W.; Teates, C.D.; Larkham, N.E.; Friesen, E.J.; Edlich, R.F.

1980-01-01

Management of radiation accident patients should have a multidisciplinary approach that includes all health professionals as well as members of public safety agencies. Emergency plans for radiation accidents include detection of the ionizing radiation, patient evacuation, resuscitation, and decontamination. The resuscitated patient should be transported to a radiation control area located outside but adjacent to the emergency department. Ideally this area is accessed through an entrance separate from that used for the main flow of daily emergency department patients. The hospital staff, provided with protective clothing, dosimeters, and preprinted guidelines, continues the resuscitation and definitive care of the patient. This system approach to the management of radiation accidents may be tailored to meet the specific needs of other emergency medical systems

The role of systems availability and operator actions in accident management

International Nuclear Information System (INIS)

Lutz, R.J. Jr.; Scobel, J.H.

1988-01-01

Traditional analyses of severe accidents, such as those presented in Probabilistic Risk Assessment (PRA) studies of nuclear power stations, have generally been performed on the assumption that all means of cooling the reactor core are lost and that no operator actions to mitigate the consequences or progression of the severe accident are performed. The assumption to neglect the availability of safety systems and operator actions which do not prevent core melting can lead to erroneous conclusions regarding the plant severe accident profile. Recent work in severe accident management has identified the need to perform analyses which consider all systems availabilities and operator actions, irrespective of their contribution to the prevention of core melting. These new analyses have far reaching conclusions. The analysis results indicate an unacceptably high degree of simplicity in the present severe accident analyses for Probabilistic Risk Assessment studies; the simplicity is in the assumption that systems availabilities and operator actions which do not impact core melt frequency can be neglected in the severe accident analyses. This results in overly pessimistic predictions of the time of core melting and the subsequent potential for recovery of core cooling prior to core melting. This simplicity can have a considerable impact on severe accident decision making, particularly in the evaluation of alternate plant design features and the priorities for research studies

Issues and challenges for pedestrian active safety systems based on real world accidents.

Science.gov (United States)

Hamdane, Hédi; Serre, Thierry; Masson, Catherine; Anderson, Robert

2015-09-01

The purpose of this study was to analyze real crashes involving pedestrians in order to evaluate the potential effectiveness of autonomous emergency braking systems (AEB) in pedestrian protection. A sample of 100 real accident cases were reconstructed providing a comprehensive set of data describing the interaction between the vehicle, the environment and the pedestrian all along the scenario of the accident. A generic AEB system based on a camera sensor for pedestrian detection was modeled in order to identify the functionality of its different attributes in the timeline of each crash scenario. These attributes were assessed to determine their impact on pedestrian safety. The influence of the detection and the activation of the AEB system were explored by varying the field of view (FOV) of the sensor and the level of deceleration. A FOV of 35° was estimated to be required to detect and react to the majority of crash scenarios. For the reaction of a system (from hazard detection to triggering the brakes), between 0.5 and 1s appears necessary. Copyright © 2015 Elsevier Ltd. All rights reserved.

Development of an accident diagnosis system using a dynamic neural network for nuclear power plants

International Nuclear Information System (INIS)

Lee, Seung Jun; Kim, Jong Hyun; Seong, Poong Hyun

2004-01-01

In this work, an accident diagnosis system using the dynamic neural network is developed. In order to help the plant operators to quickly identify the problem, perform diagnosis and initiate recovery actions ensuring the safety of the plant, many operator support system and accident diagnosis systems have been developed. Neural networks have been recognized as a good method to implement an accident diagnosis system. However, conventional accident diagnosis systems that used neural networks did not consider a time factor sufficiently. If the neural network could be trained according to time, it is possible to perform more efficient and detailed accidents analysis. Therefore, this work suggests a dynamic neural network which has different features from existing dynamic neural networks. And a simple accident diagnosis system is implemented in order to validate the dynamic neural network. After training of the prototype, several accident diagnoses were performed. The results show that the prototype can detect the accidents correctly with good performances

Geographic Information System (GIS) capabilities in traffic accident information management: a qualitative approach

Science.gov (United States)

Ahmadi, Maryam; Valinejadi, Ali; Goodarzi, Afshin; Safari, Ameneh; Hemmat, Morteza; Majdabadi, Hesamedin Askari; Mohammadi, Ali

2017-01-01

Background Traffic accidents are one of the more important national and international issues, and their consequences are important for the political, economical, and social level in a country. Management of traffic accident information requires information systems with analytical and accessibility capabilities to spatial and descriptive data. Objective The aim of this study was to determine the capabilities of a Geographic Information System (GIS) in management of traffic accident information. Methods This qualitative cross-sectional study was performed in 2016. In the first step, GIS capabilities were identified via literature retrieved from the Internet and based on the included criteria. Review of the literature was performed until data saturation was reached; a form was used to extract the capabilities. In the second step, study population were hospital managers, police, emergency, statisticians, and IT experts in trauma, emergency and police centers. Sampling was purposive. Data was collected using a questionnaire based on the first step data; validity and reliability were determined by content validity and Cronbach’s alpha of 75%. Data was analyzed using the decision Delphi technique. Results GIS capabilities were identified in ten categories and 64 sub-categories. Import and process of spatial and descriptive data and so, analysis of this data were the most important capabilities of GIS in traffic accident information management. Conclusion Storing and retrieving of descriptive and spatial data, providing statistical analysis in table, chart and zoning format, management of bad structure issues, determining the cost effectiveness of the decisions and prioritizing their implementation were the most important capabilities of GIS which can be efficient in the management of traffic accident information. PMID:28848627

Feasibility study on the rod ejection accident analysis with RETRAN-MASTER code system

International Nuclear Information System (INIS)

Kim, Y. H.; Lee, C. S.

2003-01-01

KEPRI has been developed the in-house methodology for non-LOCA safety analyses based on the codes and methodologies of vendors and EPRI. Using the methodology, the rod ejection accident, which is classified into the generic accident analysis category of reactivity insertion accident in primary system, has been analyzed with RETRAN-MASTER code system. And the feasibility of the coupled code system has been verified by the review of the results. Furthermore, to assess the important parameters to the accident, the sensitivity analyses have been carried out over some parameters

The causing model of accidents and preventing system of small mines

Energy Technology Data Exchange (ETDEWEB)

Cao, S.; Zhang, L.; Liu, Y.; Li, Y. [Chongqing University, Chongqing (China)

2008-06-15

From an analysis of data on fatal accidents in small coal mines in a southern region of China over a period of three years, the time and type of accidents was discussed by applying statistical methods. It is shown that accidents frequently occur at the end of spring and all through summer. Roof accidents and gas disasters constitute severe accidents and traffic accidents are also important. It was found that most accidents are caused by dangerous behaviour of personnel and the unsafe state of equipment combined with economic interest. The three-factor causing model (TFC model) was proposed. Unsafe behaviour is a direct cause influenced by staff and workers while the unsafe nature of equipment is an indirect cause of accidents influence by natural conditions and the level of technical equipment in the mines. A system of accident prevention in small coal collieries was established with the TFC model. In this, scientific management is an important factor. 13 refs., 4 figs., 1 tab.

[Violence and accidents among older and younger adults: evidence from the Surveillance System for Violence and Accidents (VIVA), Brazil].

Science.gov (United States)

Luz, Tatiana Chama Borges; Malta, Deborah Carvalho; Sá, Naíza Nayla Bandeira de; Silva, Marta Maria Alves da; Lima-Costa, Maria Fernanda

2011-11-01

Data from the Brazilian Surveillance System for Violence and Accidents (VIVA) in 2009 were used to examine socio-demographic characteristics, outcomes, and types of accidents and violence treated at 74 sentinel emergency services in 23 Brazilian State capitals and the Federal District. The analysis included 25,201 individuals aged > 20 years (10.1% > 60 years); 89.3% were victims of accidents and 11.9% victims of violence. Hospitalization was the outcome in 11.1% of cases. Compared to the general population, there were more men and non-white individuals among victims of accidents, and especially among victims of violence. As compared to younger adults (20-59 years), accidents and violence against elderly victims showed less association with alcohol, a higher proportion of domestic incidents, more falls and pedestrian accidents, and aggression by family members. Policies for the prevention of accidents and violence should consider the characteristics of these events in the older population.

135Cs activity and 135Cs/137Cs atom ratio in environmental samples before and after the Fukushima Daiichi Nuclear Power Plant accident.

Science.gov (United States)

Yang, Guosheng; Tazoe, Hirofumi; Yamada, Masatoshi

2016-04-07

(135)Cs/(137)Cs is a potential tracer for radiocesium source identification. However, due to the challenge to measure (135)Cs, there were no (135)Cs data available for Japanese environmental samples before the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident. It was only 3 years after the accident that limited (135)Cs values could be measured in heavily contaminated environmental samples. In the present study, activities of (134)Cs, (135)Cs, and (137)Cs, along with their ratios in 67 soil and plant samples heavily and lightly contaminated by the FDNPP accident were measured by combining γ spectrometry with ICP-MS/MS. The arithmetic means of the (134)Cs/(137)Cs activity ratio (1.033 ± 0.006) and (135)Cs/(137)Cs atom ratio (0.334 ± 0.005) (decay corrected to March 11, 2011), from old leaves of plants collected immediately after the FDNPP accident, were confirmed to represent the FDNPP derived radiocesium signature. Subsequently, for the first time, trace (135)Cs amounts before the FDNPP accident were deduced according to the contribution of global and FDNPP accident-derived fallout. Apart from two soil samples with a tiny global fallout contribution, contributions of global fallout radiocesium in other soil samples were observed to be 0.338%-52.6%. The obtained (135)Cs/(137)Cs database will be useful for its application as a geochemical tracer in the future.

ADAM: An Accident Diagnostic,Analysis and Management System - Applications to Severe Accident Simulation and Management

International Nuclear Information System (INIS)

Zavisca, M.J.; Khatib-Rahbar, M.; Esmaili, H.; Schulz, R.

2002-01-01

The Accident Diagnostic, Analysis and Management (ADAM) computer code has been developed as a tool for on-line applications to accident diagnostics, simulation, management and training. ADAM's severe accident simulation capabilities incorporate a balance of mechanistic, phenomenologically based models with simple parametric approaches for elements including (but not limited to) thermal hydraulics; heat transfer; fuel heatup, meltdown, and relocation; fission product release and transport; combustible gas generation and combustion; and core-concrete interaction. The overall model is defined by a relatively coarse spatial nodalization of the reactor coolant and containment systems and is advanced explicitly in time. The result is to enable much faster than real time (i.e., 100 to 1000 times faster than real time on a personal computer) applications to on-line investigations and/or accident management training. Other features of the simulation module include provision for activation of water injection, including the Engineered Safety Features, as well as other mechanisms for the assessment of accident management and recovery strategies and the evaluation of PSA success criteria. The accident diagnostics module of ADAM uses on-line access to selected plant parameters (as measured by plant sensors) to compute the thermodynamic state of the plant, and to predict various margins to safety (e.g., times to pressure vessel saturation and steam generator dryout). Rule-based logic is employed to classify the measured data as belonging to one of a number of likely scenarios based on symptoms, and a number of 'alarms' are generated to signal the state of the reactor and containment. This paper will address the features and limitations of ADAM with particular focus on accident simulation and management. (authors)

Cirrus Airframe Parachute System and Odds of a Fatal Accident in Cirrus Aircraft Crashes.

Science.gov (United States)

Alaziz, Mustafa; Stolfi, Adrienne; Olson, Dean M

2017-06-01

General aviation (GA) accidents have continued to demonstrate high fatality rates. Recently, ballistic parachute recovery systems (BPRS) have been introduced as a safety feature in some GA aircraft. This study evaluates the effectiveness and associated factors of the Cirrus Airframe Parachute System (CAPS) at reducing the odds of a fatal accident in Cirrus aircraft crashes. Publicly available Cirrus aircraft crash reports were obtained from the National Transportation Safety Board (NTSB) database for the period of January 1, 2001-December 31, 2016. Accident metrics were evaluated through univariate and multivariate analyses regarding odds of a fatal accident and use of the parachute system. Included in the study were 268 accidents. For CAPS nondeployed accidents, 82 of 211 (38.9%) were fatal as compared to 8 of 57 (14.0%) for CAPS deployed accidents. After controlling for all other factors, the adjusted odds ratio for a fatal accident when CAPS was not deployed was 13.1. The substantial increased odds of a fatal accident when CAPS was not deployed demonstrated the effectiveness of CAPS at providing protection of occupants during an accident. Injuries were shifted from fatal to serious or minor with the use of CAPS and postcrash fires were significantly reduced. These results suggest that BPRS could play a significant role in the next major advance in improving GA accident survival.Alaziz M, Stolfi A, Olson DM. Cirrus Airframe Parachute System and odds of a fatal accident in Cirrus aircraft crashes. Aerosp Med Hum Perform. 2017; 88(6):556-564.

Classification Of Road Accidents From The Perspective Of Vehicle Safety Systems

Directory of Open Access Journals (Sweden)

Jirovský Václav

2015-11-01

Full Text Available Modern road accident investigation and database structures are focused on accident analysis and classification from the point of view of the accident itself. The presented article offers a new approach, which will describe the accident from the point of view of integrated safety vehicle systems. Seven main categories have been defined to specify the level of importance of automated system intervention. One of the proposed categories is a new approach to defining the collision probability of an ego-vehicle with another object. This approach focuses on determining a 2-D reaction space, which describes all possible positions of the vehicle or other moving object in the specified amount of time in the future. This is to be used for defining the probability of the vehicles interacting - when the intersection of two reaction spaces exists, an action has to be taken on the side of ego-vehicle. The currently used 1-D quantity of TTC (time-to-collision can be superseded by the new reaction space variable. Such new quantity, whose basic idea is described in the article, enables the option of counting not only with necessary braking time, but mitigation by changing direction is then easily feasible. Finally, transparent classification measures of a probable accident are proposed. Their application is highly effective not only during basic accident comparison, but also for an on-board safety system.

[a Monitoring System For Work-related Accidents In Piracicaba, São Paulo, Brazil].

OpenAIRE

Cordeiro, Ricardo; Vilela, Rodolfo Andrade Gouveia; de Medeiros, Maria Angélica Tavares; Gonçalves, Cláudia Giglio de Oliveira; Bragantini, Clarice Aparecida; Varolla, Antenor J; Celso, Stephan

2015-01-01

The authors report on the development of a work accident monitoring system in Piracicaba, São Paulo State, Brazil, with the following characteristics: information feeding the system is obtained in real time directly from accident treatment centers; the system has universal monitoring, covering all work-related accidents in Piracicaba, regardless of the nature of the worker's employment conditions, place of work, or place of residence; health surveillance and promotion of health initiatives ar...

VICTORIA: A mechanistic model of radionuclide behavior in the reactor coolant system under severe accident conditions

International Nuclear Information System (INIS)

Heams, T.J.; Williams, D.A.; Johns, N.A.; Mason, A.; Bixler, N.E.; Grimley, A.J.; Wheatley, C.J.; Dickson, L.W.; Osborn-Lee, I.; Domagala, P.; Zawadzki, S.; Rest, J.; Alexander, C.A.; Lee, R.Y.

1992-12-01

The VICTORIA model of radionuclide behavior in the reactor coolant system (RCS) of a light water reactor during a severe accident is described. It has been developed by the USNRC to define the radionuclide phenomena and processes that must be considered in systems-level models used for integrated analyses of severe accident source terms. The VICTORIA code, based upon this model, predicts fission product release from the fuel, chemical reactions involving fission products, vapor and aerosol behavior, and fission product decay heating. Also included is a detailed description of how the model is implemented in VICTORIA, the numerical algorithms used, and the correlations and thermochemical data necessary for determining a solution. A description of the code structure, input and output, and a sample problem are provided

Accident Management System Based on Vehicular Network for an Intelligent Transportation System in Urban Environments

Directory of Open Access Journals (Sweden)

Yusor Rafid Bahar Al-Mayouf

2018-01-01

Full Text Available As cities across the world grow and the mobility of populations increases, there has also been a corresponding increase in the number of vehicles on roads. The result of this has been a proliferation of challenges for authorities with regard to road traffic management. A consequence of this has been congestion of traffic, more accidents, and pollution. Accidents are a still major cause of death, despite the development of sophisticated systems for traffic management and other technologies linked with vehicles. Hence, it is necessary that a common system for accident management is developed. For instance, traffic congestion in most urban areas can be alleviated by the real-time planning of routes. However, the designing of an efficient route planning algorithm to attain a globally optimal vehicle control is still a challenge that needs to be solved, especially when the unique preferences of drivers are considered. The aim of this paper is to establish an accident management system that makes use of vehicular ad hoc networks coupled with systems that employ cellular technology in public transport. This system ensures the possibility of real-time communication among vehicles, ambulances, hospitals, roadside units, and central servers. In addition, the accident management system is able to lessen the amount of time required to alert an ambulance that it is required at an accident scene by using a multihop optimal forwarding algorithm. Moreover, an optimal route planning algorithm (ORPA is proposed in this system to improve the aggregate spatial use of a road network, at the same time bringing down the travel cost of operating a vehicle. This can reduce the incidence of vehicles being stuck on congested roads. Simulations are performed to evaluate ORPA, and the results are compared with existing algorithms. The evaluation results provided evidence that ORPA outperformed others in terms of average ambulance speed and travelling time. Finally, our

Development of Traffic Accidents Control System

Directory of Open Access Journals (Sweden)

Andrey Borisovich Nikolaev

2015-05-01

Full Text Available Proposed a structure of traffic accidents control system included three main parts: pre-processing, decision support and monitoring. For decision support systems we propose a method that allows to make decisions on the basis of fuzzy situational management. The advantage of the method: it allows to formalize a set of typical traffic situations, using the theory of fuzzy sets and to carry out selection of the desired management action.

Using operational equipment to read accident dosemeters.

Science.gov (United States)

Devine, R T; Vigil, M M; Martinez, W A

2004-01-01

Analysis of accident dosemeters usually involves the use of laboratory-based counting equipment. Gamma spectrometers are used for indium, copper and gold, and alpha-beta detectors for sulphur. This equipment is usually not easily transported due to the shielding required and the weight and delicacy of the counters. For intercomparison studies that require reading the dosemeters on site, a transportable system is required unless the site operating the study can count samples for all the participants. In the case of an actual accident these systems would have a difficulty in counting a large number of accident dosemeters. In an accident, personnel are usually subdivided according to their level of exposure. Those exposed to higher doses are treated immediately. An alternate system should be made available to handle the dosemeters worn by those personnel are likely to receive lower doses. Improvements in portable operational equipment for gamma and beta monitoring allow their use as spectrometers. Such a system was used for the SILENE intercomparison conducted at IRSN Valduc on 12 June and 19, 2002, and the preliminary results compared well with the other participants.

Development of supporting system for emergency response to maritime transport accidents involving radioactive material

International Nuclear Information System (INIS)

Odano, N.; Matsuoka, T.; Suzuki, H.

2004-01-01

National Maritime Research Institute has developed a supporting system for emergency response of competent authority to maritime transport accidents involving radioactive material. The supporting system for emergency response has functions of radiation shielding calculation, marine diffusion simulation, air diffusion simulation and radiological impact evaluation to grasp potential hazard of radiation. Loss of shielding performance accident and loss of sealing ability accident were postulated and impact of the accidents was evaluated based on the postulated accident scenario. Procedures for responding to emergency were examined by the present simulation results

Analysis of Fukushima unit 2 accident considering the operating conditions of RCIC system

Energy Technology Data Exchange (ETDEWEB)

Kim, Sung Il, E-mail: sikim@kaeri.re.kr; Park, Jong Hwa; Ha, Kwang Soon; Cho, Song-Won; Song, JinHo

2016-03-15

Highlights: • Fukushima unit 2 accident was analyzed using MELCOR 1.8.6. • RCIC operating conditions were assumed and best case was selected. • Effect of RCIC operating condition on accident scenario was found. - Abstract: A severe accident in Fukushima occurred on March 11, 2011 and units 1, 2 and 3 were damaged severely. A tsunami following an earthquake made the supply of electricity power stop, and the safety systems, which use AC or DC power in plants could not operate properly. It is supposed that the degree of core degradation of unit 2 is less serious than in the other plants, and it was estimated that the operation of reactor core isolation cooling (RCIC) system at the initial stage of the accident minimized the core damage through decay heat removal. Although the operating conditions of the RCIC system are not known clearly, it can be important to analyze the accident scenario of unit 2. In this study, best case of the Fukushima unit 2 accident was presented considering the operating conditions of the RCIC system. The effects of operating condition on core degradation and fission product release rate to environment were also examined. In addition, importance of torus room flooding level in the accident analysis was discussed. MELCOR 1.8.6 was used in this research, and the geometries of plant and operating conditions of safety system were obtained from TEPCO through OECD/NEA BSAF Project.

Assessment of PASS Effectiveness under Severe Accidents in Nuclear Power Plants

International Nuclear Information System (INIS)

Choi, Yu Jung; Lee, Sung Bok; Kim, Hyeong Taek; Lee, Jin Yong

2008-01-01

Following the accident at Three Mile Island Unit 2 (TMI-2) on March 28, 1979, the USNRC formed a lessons-learned Task Force to identify and evaluate safety concerns originating with the TMI-2 accident. NUREG-0578 documented the results of the task force effort. One of the recommendations of the task force was for licensees to upgrade the capability to obtain samples from the reactor coolant system and containment atmosphere under high radioactivity conditions and to provide the capability for chemical and spectral analyses of high-level samples on site. NUREG-0737 contained the details of the TMI recommendations that were to be implemented by the licensees. Additional criteria for post accident sampling system(PASS) were issued by Regulatory Guide 1.97. As the results, PASS has been installed on nuclear power plants(NPPs) in Korea as well as United States. However, significant improvements have been achieved since the TMI-2 accident in the areas of understanding risks associated with nuclear plant operations and developing better strategies for managing the response to potential severe accidents at NPPs. Thus, the requirements for PASS have been re-evaluated in some reports. According to the reports, the samples and measurements from PASS do not contribute significantly to emergency management response to severe accidents due to the long analyzing time, 3 hours. Hence, this paper focused on the development of the quantitative analysis methodology to analyze the sequence of the severe accident in Yonggwang nuclear power plants (YGN) and presented the results of the analysis according to the developed methodology

Development of radiation dose assessment system for radiation accident (RADARAC)

International Nuclear Information System (INIS)

Takahashi, Fumiaki; Shigemori, Yuji; Seki, Akiyuki

2009-07-01

The possibility of radiation accident is very rare, but cannot be regarded as zero. Medical treatments are quite essential for a heavily exposed person in an occurrence of a radiation accident. Radiation dose distribution in a human body is useful information to carry out effectively the medical treatments. A radiation transport calculation utilizing the Monte Carlo method has an advantageous in the analysis of radiation dose inside of the body, which cannot be measured. An input file, which describes models for the accident condition and quantities of interest, should be prepared to execute the radiation transport calculation. Since the accident situation, however, cannot be prospected, many complicated procedures are needed to make effectively the input file soon after the occurrence of the accident. In addition, the calculated doses are to be given in output files, which usually include much information concerning the radiation transport calculation. Thus, Radiation Dose Assessment system for Radiation Accident (RADARAC) was developed to derive effectively radiation dose by using the MCNPX or MCNP code. RADARAC mainly consists of two parts. One part is RADARAC - INPUT, which involves three programs. A user can interactively set up necessary resources to make input files for the codes, with graphical user interfaces in a personnel computer. The input file includes information concerning the geometric structure of the radiation source and the exposed person, emission of radiations during the accident, physical quantities of interest and so on. The other part is RADARAC - DOSE, which has one program. The results of radiation doses can be effectively indicated with numerical tables, graphs and color figures visibly depicting dose distribution by using this program. These results are obtained from the outputs of the radiation transport calculations. It is confirmed that the system can effectively make input files with a few thousand lines and indicate more than 20

Central nervous system affecting drugs and road traffic accidents ...

African Journals Online (AJOL)

Central nervous system affecting drugs and road traffic accidents among commercial motorcyclists. ... including driving under the influence of drugs that affect the central nervous system (CNS). ... Keywords: Brain, influence, riders, substances ...

URBAN TRAFFIC ACCIDENT ANALYSIS BY USING GEOGRAPHIC INFORMATION SYSTEM

Directory of Open Access Journals (Sweden)

Meltem SAPLIOĞLU

2006-03-01

Full Text Available In recent years, traffic accidents that cause more social and economic losses than that of natural disasters,have become a national problem in Turkey. To solve this problem and to reduce the casualties, road safety programs are tried to be developed. It is necessary to develop the most effective measures with low investment cost due to limited budgets allocated to such road safety programs. The most important program is to determine dangerous locations of traffic accidents and to improve these sections from the road safety view point. New Technologies are driving a cycle of continuous improvement that causes rapid changes in the traffic engineering and any engineering services within it. It is obvious that this developed services will be the potential for forward-thinking engineering studies to take a more influence role. In this study, Geographic Information System (GIS was used to identify the hazardous locations of traffic accidents in Isparta. Isparta city map was digitized by using Arcinfo 7.21. Traffic accident reports occurred between 1998-2002 were obtained from Directory of Isparta Traffic Region and had been used to form the database. Topology was set up by using Crash Diagrams and Geographic Position Reference Systems. Tables are formed according to the obtained results and interpreted.

Reliability analysis of emergency decay heat removal system of nuclear ship under various accident conditions

International Nuclear Information System (INIS)

Matsuoka, Takeshi

1984-01-01

A reliability analysis is given for the emergency decay heat removal system of the Nuclear Ship ''Mutsu'' and the emergency sea water cooling system of the Nuclear Ship ''Savannah'', under ten typical nuclear ship accident conditions. Basic event probabilities under these accident conditions are estimated from literature survey. These systems of Mutsu and Savannah have almost the same reliability under the normal condition. The dispersive arrangement of a system is useful to prevent the reduction of the system reliability under the condition of an accident restricted in one room. As for the reliability of these two systems under various accident conditions, it is seen that the configuration and the environmental condition of a system are two main factors which determine the reliability of the system. Furthermore, it was found that, for the evaluation of the effectiveness of safety system of a nuclear ship, it is necessary to evaluate its reliability under various accident conditions. (author)

Measurement of {sup 14}C/{sup 12}C ratios in plant samples that were affected by the Fukushima nuclear accident

Energy Technology Data Exchange (ETDEWEB)

Hashimoto, Risa; Inoue, Aki; Muramatsu, Yasuyuki [Gakushuin University, 1-5-1 Mejiro, Toshima-ku, Tokyo, 171-8588 (Japan); Matsuzaki, Hiroyuki [The University of Tokyo, Micro Analysis Laboratory, Tandem Accelerator, 2-11-16 Yayoi, Bunkyo-ku, Tokyo, 113-0032 (Japan)

2014-07-01

In nature, {sup 14}C is produced by cosmic ray reactions in the upper atmosphere, and its production is influenced by the flux of cosmic rays. This nuclide is also released into the atmosphere by anthropogenic sources such as nuclear weapons testing and a nuclear accident. The produced {sup 14}C immediately becomes {sup 14}CO{sub 2} and it is absorbed by plants through photosynthesis. Therefore, plants are reflected by atmospheric {sup 14}C levels at that time. Although there are many papers reporting the release of several nuclides by the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident occurred in March, 2011, it is not clear whether appreciable amounts of {sup 14}C were released into the environment due to the accident. In this study, we focus on {sup 14}C levels in plant samples collected from several locations in Fukushima Prefecture (Okuma, Namie, Iitate, and Fukushima-city) and examine the possible influence on the {sup 14}C revels in plants. Since cedars and pines are evergreen, the leaves should have been contaminated at the time of the accident. We analyzed old leaves, which were grown before the accident, and new leaves, which were grown after the accident. Both old and new leaves were collected in the same branch. In order to compare delta {sup 14}C values in leaves collected from Fukushima Prefecture with background values, we have used plant samples collected from remote areas such as Chiba and Niigata Prefectures. The samples were dried, pulverized in a blender and homogenized. Then samples were placed between copper oxide wires in a quarts tube, burned and oxidized. The produced CO{sub 2} mixed gases were purified in a vacuum line. To prepare a graphite target for AMS, the purified CO{sub 2} was reduced. {sup 14}C/{sup 12}C ratio in the graphite was measured by AMS at the University of Tokyo or Japan Atomic Energy Agency. Analytical results showed that delta {sup 14}C values in plant samples collected from the highly contaminated areas such as

Actinide nuclides in environmental air and precipitation samples after the Chernobyl accident

International Nuclear Information System (INIS)

Rosner, G.; Hoetzl, H.; Winkler, R.

1988-01-01

The present paper describes the analysis of isotopes of uranium, neptunium, plutonium, americium and curium, in air and deposition samples taken at our laboratory site 10 km north of Munich, subsequent to the Chernobyl accident. Uranium-234, 237 U, 238 U, 239 Np, 238 Pu, 239+240 Pu and 242 Cm have been identified and upper limits of detection have been established for 241 Am and 244 Cm. Deposition and air concentration values are discussed. 12 refs., 1 fig., 2 tabs

Multi-phase model development to assess RCIC system capabilities under severe accident conditions

Energy Technology Data Exchange (ETDEWEB)

Kirkland, Karen Vierow [Texas A & M Univ., College Station, TX (United States); Ross, Kyle [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Beeny, Bradley [Texas A & M Univ., College Station, TX (United States); Luthman, Nicholas [Texas A& M Engineering Experiment Station, College Station, TX (United States); Strater, Zachary [Texas A & M Univ., College Station, TX (United States)

2017-12-23

The Reactor Core Isolation Cooling (RCIC) System is a safety-related system that provides makeup water for core cooling of some Boiling Water Reactors (BWRs) with a Mark I containment. The RCIC System consists of a steam-driven Terry turbine that powers a centrifugal, multi-stage pump for providing water to the reactor pressure vessel. The Fukushima Dai-ichi accidents demonstrated that the RCIC System can play an important role under accident conditions in removing core decay heat. The unexpectedly sustained, good performance of the RCIC System in the Fukushima reactor demonstrates, firstly, that its capabilities are not well understood, and secondly, that the system has high potential for extended core cooling in accident scenarios. Better understanding and analysis tools would allow for more options to cope with a severe accident situation and to reduce the consequences. The objectives of this project were to develop physics-based models of the RCIC System, incorporate them into a multi-phase code and validate the models. This Final Technical Report details the progress throughout the project duration and the accomplishments.

Factors correlated with traffic accidents as a basis for evaluating Advanced Driver Assistance Systems.

Science.gov (United States)

Staubach, Maria

2009-09-01

This study aims to identify factors which influence and cause errors in traffic accidents and to use these as a basis for information to guide the application and design of driver assistance systems. A total of 474 accidents were examined in depth for this study by means of a psychological survey, data from accident reports, and technical reconstruction information. An error analysis was subsequently carried out, taking into account the driver, environment, and vehicle sub-systems. Results showed that all accidents were influenced by errors as a consequence of distraction and reduced activity. For crossroad accidents, there were further errors resulting from sight obstruction, masked stimuli, focus errors, and law infringements. Lane departure crashes were additionally caused by errors as a result of masked stimuli, law infringements, expectation errors as well as objective and action slips, while same direction accidents occurred additionally because of focus errors, expectation errors, and objective and action slips. Most accidents were influenced by multiple factors. There is a safety potential for Advanced Driver Assistance Systems (ADAS), which support the driver in information assimilation and help to avoid distraction and reduced activity. The design of the ADAS is dependent on the specific influencing factors of the accident type.

Phenomena occurring in the reactor coolant system during severe core damage accidents

International Nuclear Information System (INIS)

Malinauskas, A.P.

1989-01-01

The reactor coolant system (RCS) of a nuclear power plant consists of the reactor pressure vessel and the piping and associated components that are required for the continuous circulation of the coolant which is used to maintain thermal equilibrium throughout the system. In the event of an accident, the RCS also serves as one of several barriers to the escape of radiotoxic material into the biosphere. In contrast to normal operating conditions, severe core damage accidents are characterized by significant temporal and spatial variations in heat and mass fluxes, and by eventual geometrical changes within the RCS. Furthermore, the difficulties in describing the system in the severe accident mode are compounded by the occurrence of chemical reactions. These reactions can influence both the thermal and the mass transport behavior of the system. In addition, behavior of the reactor vessel internals and of materials released from the core region (especially the radioactive fission products) in the course of the accident likewise become of concern to the analyst. This report addresses these concerns. 9 refs., 1 tab

Status and functioning of the European Commission's major accident reporting system

International Nuclear Information System (INIS)

Kirchsteiger, C.

1999-01-01

This paper describes the background, functioning and status of the European Commission's Major Accident Reporting System (MARS), dedicated to collect, in a consistent way, data on major industrial accidents involving dangerous substances from the Member States of the European Union, to analyse and statistically process them, and to create subsets of all non-confidential accidents data and analysis results for export to all Member States. This modern information exchange and analysis tool is made up of two connected parts: one for each local unit (i.e., for the Competent Authority of each EU Member State), and one central part for the European Commission. The local, as well as the central parts of this information network, can serve both as data logging systems and, on different levels of complexity, as data analysis tools. The central database allows complex cluster and pattern analysis, identifying and analysing the succession of the disruptive factors leading to an accident. On this basis, 'lessons learned' can be formulated for the industry for the purposes of further accident prevention. Further, results from analysing data of major industrial accidents reported to MARS are presented. It can be shown that some of the main assumptions in the new 'Seveso II Directive' can directly be validated from MARS data. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

Building of communication system for nuclear accident emergency disposal based on IP multimedia subsystem

Science.gov (United States)

Wang, Kang; Gao, Guiqing; Qin, Yuanli; He, Xiangyong

2018-05-01

The nuclear accident emergency disposal must be supported by an efficient, real-time modularization and standardization communication system. Based on the analysis of communication system for nuclear accident emergency disposal which included many functions such as the internal and external communication, multiply access supporting and command center. Some difficult problems of the communication system were discussed such as variety access device type, complex composition, high mobility, set up quickly, multiply business support, and so on. Taking full advantages of the IP Multimedia Subsystem (IMS), a nuclear accident emergency communication system was build based on the IMS. It was studied and implemented that some key unit and module functions of communication system were included the system framework implementation, satellite access, short-wave access, load/vehicle-mounted communication units. The application tests showed that the system could provide effective communication support for the nuclear accident emergency disposal, which was of great practical value.

Full scale simulations of accidents on spent-nuclear-fuel shipping systems

International Nuclear Information System (INIS)

Yoshimura, H.R.

1978-01-01

In 1977 and 1978, five first-of-a-kind full scale tests of spent-nuclear-fuel shipping systems were conducted at Sandia Laboratories. The objectives of this broad test program were (1) to assess and demonstrate the validity of current analytical and scale modeling techniques for predicting damage in accident conditions by comparing predicted results with actual test results, and (2) to gain quantitative knowledge of extreme accident environments by assessing the response of full scale hardware under actual test conditions. The tests were not intended to validate the present regulatory standards. The spent fuel cask tests fell into the following configurations: crashes of a truck-transport system into a massive concrete barrier (100 and 130 km/h); a grade crossing impact test (130 km/h) involving a locomotive and a stalled tractor-trailer; and a railcar shipping system impact into a massive concrete barrier (130 km/h) followed by fire. In addition to collecting much data on the response of cask transport systems, the program has demonstrated thus far that current analytical and scale modeling techniques are valid approaches for predicting vehicular and cask damage in accident environments. The tests have also shown that the spent casks tested are extremely rugged devices capable of retaining their radioactive contents in very severe accidents

K Basins floor sludge retrieval system knockout pot basket fuel burn accident

International Nuclear Information System (INIS)

HUNT, J.W.

1998-01-01

The K Basins Sludge Retrieval System Preliminary Hazard Analysis Report (HNF-2676) identified and categorized a series of potential accidents associated with K Basins Sludge Retrieval System design and operation. The fuel burn accident was of concern with respect to the potential release of contamination resulting from a runaway chemical reaction of the uranium fuel in a knockout pot basket suspended in the air. The unmitigated radiological dose to an offsite receptor from this fuel burn accident is calculated to be much less than the offsite risk evaluation guidelines for anticipated events. However, because of potential radiation exposure to the facility worker, this accident is precluded with a safety significant lifting device that will prevent the monorail hoist from lifting the knockout pot basket out of the K Basin water pool

An application of probabilistic safety assessment methods to model aircraft systems and accidents

Energy Technology Data Exchange (ETDEWEB)

Martinez-Guridi, G.; Hall, R.E.; Fullwood, R.R.

1998-08-01

A case study modeling the thrust reverser system (TRS) in the context of the fatal accident of a Boeing 767 is presented to illustrate the application of Probabilistic Safety Assessment methods. A simplified risk model consisting of an event tree with supporting fault trees was developed to represent the progression of the accident, taking into account the interaction between the TRS and the operating crew during the accident, and the findings of the accident investigation. A feasible sequence of events leading to the fatal accident was identified. Several insights about the TRS and the accident were obtained by applying PSA methods. Changes proposed for the TRS also are discussed.

Development of Integrated Evaluation System for Severe Accident Management

Energy Technology Data Exchange (ETDEWEB)

Kim, Dong Ha; Kim, K. R.; Park, S. H.; Park, S. Y.; Park, J. H.; Song, Y. M.; Ahn, K. I.; Choi, Y

2007-06-15

The objective of the project is twofold. One is to develop a severe accident database (DB) for the Korean Standard Nuclear Power plant (OPR-1000) and a DB management system, and the other to develop a localized computer code, MIDAS (Multi-purpose IntegrateD Assessment code for Severe accidents). The MELCOR DB has been constructed for the typical representative sequences to support the previous MAAP DB in the previous phase. The MAAP DB has been updated using the recent version of MAAP 4.0.6. The DB management system, SARD, has been upgraded to manage the MELCOR DB in addition to the MAAP DB and the network environment has been constructed for many users to access the SARD simultaneously. The integrated MIDAS 1.0 has been validated after completion of package-wise validation. As the current version of MIDAS cannot simulate the anticipated transient without scram (ATWS) sequence, point-kinetics model has been implemented. Also the gap cooling phenomena after corium relocation into the RPV can be modeled by the user as an input parameter. In addition, the subsystems of the severe accident graphic simulator are complemented for the efficient severe accident management and the engine of the graphic simulator was replaced by the MIDAS instead of the MELCOR code. For the user's convenience, MIDAS input and output processors are upgraded by enhancing the interfacial programs.

Development of Integrated Evaluation System for Severe Accident Management

International Nuclear Information System (INIS)

Kim, Dong Ha; Kim, K. R.; Park, S. H.; Park, S. Y.; Park, J. H.; Song, Y. M.; Ahn, K. I.; Choi, Y.

2007-06-01

The objective of the project is twofold. One is to develop a severe accident database (DB) for the Korean Standard Nuclear Power plant (OPR-1000) and a DB management system, and the other to develop a localized computer code, MIDAS (Multi-purpose IntegrateD Assessment code for Severe accidents). The MELCOR DB has been constructed for the typical representative sequences to support the previous MAAP DB in the previous phase. The MAAP DB has been updated using the recent version of MAAP 4.0.6. The DB management system, SARD, has been upgraded to manage the MELCOR DB in addition to the MAAP DB and the network environment has been constructed for many users to access the SARD simultaneously. The integrated MIDAS 1.0 has been validated after completion of package-wise validation. As the current version of MIDAS cannot simulate the anticipated transient without scram (ATWS) sequence, point-kinetics model has been implemented. Also the gap cooling phenomena after corium relocation into the RPV can be modeled by the user as an input parameter. In addition, the subsystems of the severe accident graphic simulator are complemented for the efficient severe accident management and the engine of the graphic simulator was replaced by the MIDAS instead of the MELCOR code. For the user's convenience, MIDAS input and output processors are upgraded by enhancing the interfacial programs

[Hospital information system performance for road traffic accidents analysis in a hospital recruitment based area].

Science.gov (United States)

Jannot, A-S; Fauconnier, J

2013-06-01

Road traffic accidents in France are mainly analyzed through reports completed by the security forces (police and gendarmerie). But the hospital information systems can also identify road traffic accidents via specific documentary codes of the International Classification of Diseases (ICD-10). The aim of this study was therefore to determine whether hospital stays consecutive to road traffic accident were truly identified by these documentary codes in a facility that collects data routinely and to study the consistency of results from hospital information systems and from security forces during the 2002-2008 period. We retrieved all patients for whom a documentary code for road traffic accident was entered in 2002-2008. We manually checked the concordance of documentary code for road traffic accident and trauma origin in 350 patient files. The number of accidents in the Grenoble area was then inferred by combining with hospitalization regional data and compared to the number of persons injured by traffic accidents declared by the security force. These hospital information systems successfully report road traffic accidents with 96% sensitivity (95%CI: [92%, 100%]) and 97% specificity (95%CI: [95%, 99%]). The decrease in road traffic accidents observed was significantly less than that observed was significantly lower than that observed in the data from the security force (45% for security force data against 27% for hospital data). Overall, this study shows that hospital information systems are a powerful tool for studying road traffic accidents morbidity in hospital and are complementary to security force data. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Study on the establishment of retrospective dosimetry system for nuclear radiation accident(II)

Energy Technology Data Exchange (ETDEWEB)

Jun, Jae Shik; Chai, Ha Seok; Lee, Jong Ok [Chungnam National Univ., Taejon (Korea, Republic of)

1999-03-15

This study was driven forward centering around physical techniques in retrospective dosimetry system for encountering nuclear radiation accident. The results obtained through this study are summarized as follow : the minimal facilities based on physical techniques should be assured at KINS for appropriate operation and establishment of retrospective accident dosimetry system, the necessary apparatus and man power for retrospective dose assessment by physical techniques might be operated flexibly, however, CL and TL/OSL readers should be equipped with the highest priority, a series of comparative examination of several physical techniques for retrospective dose assessment revealed that most of the irradiated materials around accident sites are usable for the dose assessment, if a priori study on the dosimetrical characteristics of those materials is preceded in accordance with the species of the collectable samples, the results of the study on the CL-dose response and radiation energy dependence of sugar and sorbitol, showed the nonlinearity in CL-dose relationship at the range of low dose(less than 5 Gy), and it led us to perform a study on the correction of the nonlinearity, and in the later study, CL output showed heavy dependence on radiation energy in the energy below around 100 keV and accordingly, a study on the correction for the energy dependence was also carried out, ve were able to obtain good results as a first attempt to carry out such corrections.

Nuclear fuel cycle facility accident analysis handbook

International Nuclear Information System (INIS)

Ayer, J.E.; Clark, A.T.; Loysen, P.; Ballinger, M.Y.; Mishima, J.; Owczarski, P.C.; Gregory, W.S.; Nichols, B.D.

1988-05-01

The Accident Analysis Handbook (AAH) covers four generic facilities: fuel manufacturing, fuel reprocessing, waste storage/solidification, and spent fuel storage; and six accident types: fire, explosion, tornado, criticality, spill, and equipment failure. These are the accident types considered to make major contributions to the radiological risk from accidents in nuclear fuel cycle facility operations. The AAH will enable the user to calculate source term releases from accident scenarios manually or by computer. A major feature of the AAH is development of accident sample problems to provide input to source term analysis methods and transport computer codes. Sample problems and illustrative examples for different accident types are included in the AAH

VICTORIA: A mechanistic model of radionuclide behavior in the reactor coolant system under severe accident conditions. Revision 1

Energy Technology Data Exchange (ETDEWEB)

Heams, T J [Science Applications International Corp., Albuquerque, NM (United States); Williams, D A; Johns, N A; Mason, A [UKAEA, Winfrith, (England); Bixler, N E; Grimley, A J [Sandia National Labs., Albuquerque, NM (United States); Wheatley, C J [UKAEA, Culcheth (England); Dickson, L W [Atomic Energy of Canada Ltd., Chalk River, ON (Canada); Osborn-Lee, I [Oak Ridge National Lab., TN (United States); Domagala, P; Zawadzki, S; Rest, J [Argonne National Lab., IL (United States); Alexander, C A [Battelle, Columbus, OH (United States); Lee, R Y [Nuclear Regulatory Commission, Washington, DC (United States)

1992-12-01

The VICTORIA model of radionuclide behavior in the reactor coolant system (RCS) of a light water reactor during a severe accident is described. It has been developed by the USNRC to define the radionuclide phenomena and processes that must be considered in systems-level models used for integrated analyses of severe accident source terms. The VICTORIA code, based upon this model, predicts fission product release from the fuel, chemical reactions involving fission products, vapor and aerosol behavior, and fission product decay heating. Also included is a detailed description of how the model is implemented in VICTORIA, the numerical algorithms used, and the correlations and thermochemical data necessary for determining a solution. A description of the code structure, input and output, and a sample problem are provided.

Bibliography for nuclear criticality accident experience, alarm systems, and emergency management

International Nuclear Information System (INIS)

Putman, V.L.

1995-09-01

The characteristics, detection, and emergency management of nuclear criticality accidents outside reactors has been an important component of criticality safety for as long as the need for this specialized safety discipline has been recognized. The general interest and importance of such topics receives special emphasis because of the potentially lethal, albeit highly localized, effects of criticality accidents and because of heightened public and regulatory concerns for any undesirable event in nuclear and radiological fields. This bibliography lists references which are potentially applicable to or interesting for criticality alarm, detection, and warning systems; criticality accident emergency management; and their associated programs. The lists are annotated to assist bibliography users in identifying applicable: industry and regulatory guidance and requirements, with historical development information and comments; criticality accident characteristics, consequences, experiences, and responses; hazard-, risk-, or safety-analysis criteria; CAS design and qualification criteria; CAS calibration, maintenance, repair, and testing criteria; experiences of CAS designers and maintainers; criticality accident emergency management (planning, preparedness, response, and recovery) requirements and guidance; criticality accident emergency management experience, plans, and techniques; methods and tools for analysis; and additional bibliographies

Actinide nuclides in environmental air and precipitation samples after the Chernobyl accident

Energy Technology Data Exchange (ETDEWEB)

Rosner, G.; Hoetzl, H.; Winkler, R. (Gesellschaft fuer Strahlen- und Umweltforschung mbH Muenchen (West Germany))

1988-01-01

The present paper describes the analysis of isotopes of uranium, neptunium, plutonium, americium and curium, in air and deposition samples taken at our laboratory site 10 km north of Munich, subsequent to the Chernobyl accident. Uranium-234, {sup 237}U, {sup 238}U, {sup 239}Np, {sup 238}Pu, {sup 239+240}Pu and {sup 242}Cm have been identified and upper limits of detection have been established for {sup 241}Am and {sup 244}Cm. Deposition and air concentration values are discussed. 12 refs., 1 fig., 2 tabs.

NPP post-accident monitoring system based on unmanned aircraft vehicle:concept, design principles

International Nuclear Information System (INIS)

Sachenko, A.A.; Kochan, V.V.; Kharchenko, V.S.; Yanovskij, M.Eh.; Yastrebenetskij, M.A.; Fesenko, G.V.

2016-01-01

The paper presents a concept of designing the post-accident system for monitoring the equipment and territory of nuclear power plant after a severe accident based on unmanned aircraft vehicle (UAVs). Wired power and communications networks are found out as the most vulnerable ones during the accident monitoring, and informativity, reliability and veracity are recognized as system basic parameters. It is proposed to equip measurement and control modules with backup wireless communication channels and deploy the repeaters network based on UAVs to ensure the informativity. Modules possess the backup power battery, and repeaters appear in the appropriate places after the accident to provide the survivability. Moreover, an optimization of UAVs' location is proposed according to the minimum energy consumption criterion. To ensure the veracity, it is expected to design the noise-immune protocol for message exchange and archiving and self-diagnostics of all system components

Development of Highly Survivable Power and Communication System for NPP Instruments under Severe Accident

Energy Technology Data Exchange (ETDEWEB)

Yoo, Seung J.; Gu, Beom W.; Nguyen, Duy T.; Choi, Bo H.; Rim, Chun T. [KAIST, Daejeon (Korea, Republic of); Lee, So I. [KHNP CRI, Daejeon (Korea, Republic of)

2014-10-15

According to the detail report from the Fukushima nuclear accident, the failure of conventional instruments is mainly due to the following reasons. 1) Insufficient backup battery capacity after the station black out (SBO) 2) The malfunction or damage of instruments due to the extremely harsh ambient condition after the severe accident 3) The cut-off of power and communication cable due to the physical shocks of hydrogen explosion after the severe accident Since the current equipment qualification (EQ) for the NPP instruments is based on the design basis accident such as loss of coolant accident (LOCA), conventional instruments, which are examined under EQ condition, cannot guarantee their normal operation during the severe accident. A 7m-long-distance wireless power transfer and a radio frequency (RF) communication were introduced with conventional wired system to increase a redundancy. A heat isolation box and a harness are adopted to provide a protection from the expected physical shocks such as missiles and drastic increase of ambient temperature and pressure. A detail design principle of the highly survivable power and communication system, which has 4 sub-systems of a DCRS wireless power transfer, a Zigbee wireless communication, a GFRP harness, and a passive type router with a fly back regulator, has been presented in this paper. Each sub-system has been designed to have a robust operation characteristic regardless of the estimated physical shocks after the severe accident.

Development of Highly Survivable Power and Communication System for NPP Instruments under Severe Accident

International Nuclear Information System (INIS)

Yoo, Seung J.; Gu, Beom W.; Nguyen, Duy T.; Choi, Bo H.; Rim, Chun T.; Lee, So I.

2014-01-01

According to the detail report from the Fukushima nuclear accident, the failure of conventional instruments is mainly due to the following reasons. 1) Insufficient backup battery capacity after the station black out (SBO) 2) The malfunction or damage of instruments due to the extremely harsh ambient condition after the severe accident 3) The cut-off of power and communication cable due to the physical shocks of hydrogen explosion after the severe accident Since the current equipment qualification (EQ) for the NPP instruments is based on the design basis accident such as loss of coolant accident (LOCA), conventional instruments, which are examined under EQ condition, cannot guarantee their normal operation during the severe accident. A 7m-long-distance wireless power transfer and a radio frequency (RF) communication were introduced with conventional wired system to increase a redundancy. A heat isolation box and a harness are adopted to provide a protection from the expected physical shocks such as missiles and drastic increase of ambient temperature and pressure. A detail design principle of the highly survivable power and communication system, which has 4 sub-systems of a DCRS wireless power transfer, a Zigbee wireless communication, a GFRP harness, and a passive type router with a fly back regulator, has been presented in this paper. Each sub-system has been designed to have a robust operation characteristic regardless of the estimated physical shocks after the severe accident

Coupling the severe accident code SCDAP with the system thermal hydraulic code MARS

Energy Technology Data Exchange (ETDEWEB)

Lee, Young Jin; Chung, Bub Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

2004-07-01

MARS is a best-estimate system thermal hydraulics code with multi-dimensional modeling capability. One of the aims in MARS code development is to make it a multi-functional code system with the analysis capability to cover the entire accident spectrum. For this purpose, MARS code has been coupled with a number of other specialized codes such as CONTEMPT for containment analysis, and MASTER for 3-dimensional kinetics. And in this study, the SCDAP code has been coupled with MARS to endow the MARS code system with severe accident analysis capability. With the SCDAP, MARS code system now has acquired the capability to simulate such severe accident related phenomena as cladding oxidation, melting and slumping of fuel and reactor structures.

Coupling the severe accident code SCDAP with the system thermal hydraulic code MARS

International Nuclear Information System (INIS)

Lee, Young Jin; Chung, Bub Dong

2004-01-01

MARS is a best-estimate system thermal hydraulics code with multi-dimensional modeling capability. One of the aims in MARS code development is to make it a multi-functional code system with the analysis capability to cover the entire accident spectrum. For this purpose, MARS code has been coupled with a number of other specialized codes such as CONTEMPT for containment analysis, and MASTER for 3-dimensional kinetics. And in this study, the SCDAP code has been coupled with MARS to endow the MARS code system with severe accident analysis capability. With the SCDAP, MARS code system now has acquired the capability to simulate such severe accident related phenomena as cladding oxidation, melting and slumping of fuel and reactor structures

Preliminary safety analysis of the PWR with accident-tolerant fuels during severe accident conditions

International Nuclear Information System (INIS)

Wu, Xiaoli; Li, Wei; Wang, Yang; Zhang, Yapei; Tian, Wenxi; Su, Guanghui; Qiu, Suizheng; Liu, Tong; Deng, Yongjun; Huang, Heng

2015-01-01

Highlights: • Analysis of severe accident scenarios for a PWR fueled with ATF system is performed. • A large-break LOCA without ECCS is analyzed for the PWR fueled with ATF system. • Extended SBO cases are discussed for the PWR fueled with ATF system. • The accident-tolerance of ATF system for application in PWR is illustrated. - Abstract: Experience gained in decades of nuclear safety research and previous nuclear accidents direct to the investigation of passive safety system design and accident-tolerant fuel (ATF) system which is now becoming a hot research point in the nuclear energy field. The ATF system is aimed at upgrading safety characteristics of the nuclear fuel and cladding in a reactor core where active cooling has been lost, and is preferable or comparable to the current UO 2 –Zr system when the reactor is in normal operation. By virtue of advanced materials with improved properties, the ATF system will obviously slow down the progression of accidents, allowing wider margin of time for the mitigation measures to work. Specifically, the simulation and analysis of a large break loss of coolant accident (LBLOCA) without ECCS and extended station blackout (SBO) severe accident are performed for a pressurized water reactor (PWR) loaded with ATF candidates, to reflect the accident-tolerance of ATF

Natural hazard impacts on transport systems: analyzing the data base of transport accidents in Russia

Science.gov (United States)

Petrova, Elena

2015-04-01

We consider a transport accident as any accident that occurs during transportation of people and goods. It comprises of accidents involving air, road, rail, water, and pipeline transport. With over 1.2 million people killed each year, road accidents are one of the world's leading causes of death; another 20-50 million people are injured each year on the world's roads while walking, cycling, or driving. Transport accidents of other types including air, rail, and water transport accidents are not as numerous as road crashes, but the relative risk of each accident is much higher because of the higher number of people killed and injured per accident. Pipeline ruptures cause large damages to the environment. That is why safety and security are of primary concern for any transport system. The transport system of the Russian Federation (RF) is one of the most extensive in the world. It includes 1,283,000 km of public roads, more than 600,000 km of airlines, more than 200,000 km of gas, oil, and product pipelines, 115,000 km of inland waterways, and 87,000 km of railways. The transport system, especially the transport infrastructure of the country is exposed to impacts of various natural hazards and weather extremes such as heavy rains, snowfalls, snowdrifts, floods, earthquakes, volcanic eruptions, landslides, snow avalanches, debris flows, rock falls, fog or icing roads, and other natural factors that additionally trigger many accidents. In June 2014, the Ministry of Transport of the RF has compiled a new version of the Transport Strategy of the RF up to 2030. Among of the key pillars of the Strategy are to increase the safety of the transport system and to reduce negative environmental impacts. Using the data base of technological accidents that was created by the author, the study investigates temporal variations and regional differences of the transport accidents' risk within the Russian federal regions and a contribution of natural factors to occurrences of different

Water level measurement system in reactor pressure vessel of BWR and hydrogen concentration monitoring system for severe accident

International Nuclear Information System (INIS)

Kuroda, Hidehiko; Okazaki, Koki; Shiraishi, Fujio; Kenjyo, Hiroaki; Isoda, Koichiro

2013-01-01

TEPCO's Fukushima Daiichi Nuclear Power Station Accident caused severe accident to lose functions of many instrumentation systems. As a result, many important plant parameters couldn't be monitored. In order to monitor plant parameters in the case of severe accident, new instrumentation systems available in the severe conditions are being developed. Water level in reactor pressure vessel and hydrogen concentration in primary containment vessel are one of the most important parameters. Performance test results about water level measurement sensor and hydrogen sensor in severe environmental conditions are described. (author)

XENON-133 IN CALIFORNIA, NEVADA, AND UTAH FROM THE CHERNOBYL ACCIDENT (JOURNAL VERSION)

Science.gov (United States)

The accident at the Chernobyl nuclear reactor in the USSR introduced numerous radioactive nuclides into the atmosphere, including the noble gas xenon-133. EPA's Environmental Monitoring Systems Laboratory, Las Vegas, NV, detected xenon-133 from the Chernobyl accident in air sampl...

Applying of Reliability Techniques and Expert Systems in Management of Radioactive Accidents

International Nuclear Information System (INIS)

Aldaihan, S.; Alhbaib, A.; Alrushudi, S.; Karazaitri, C.

1998-01-01

Accidents including radioactive exposure have variety of nature and size. This makes such accidents complex situations to be handled by radiation protection agencies or any responsible authority. The situations becomes worse with introducing advanced technology with high complexity that provide operator huge information about system working on. This paper discusses the application of reliability techniques in radioactive risk management. Event tree technique from nuclear field is described as well as two other techniques from nonnuclear fields, Hazard and Operability and Quality Function Deployment. The objective is to show the importance and the applicability of these techniques in radiation risk management. Finally, Expert Systems in the field of accidents management are explored and classified upon their applications

Application of the accident management information needs methodology to a severe accident sequence

International Nuclear Information System (INIS)

Ward, L.W.; Hanson, D.J.; Nelson, W.R.; Solberg, D.E.

1989-01-01

The U.S. Nuclear Regulatory Commission is conducting an accident management research program that emphasizes the use of severe accident research to enhance the ability of plant operating personnel to effectively manage severe accidents. Hence, it is necessary to ensure that the plant instrumentation and information systems adequately provide this information to the operating staff during accident conditions. A methodology to identify and assess the information needs of the operating staff of a nuclear power plant during a severe accident has been developed. The methodology identifies (a) the information needs of the plant personnel during a wide range of accident conditions, (b) the existing plant measurements capable of supplying these information needs and minor additions to instrument and display systems that would enhance management capabilities, (c) measurement capabilities and limitations during severe accident conditions, and (d) areas in which the information systems could mislead plant personnel

Application of the accident management information needs methodology to a severe accident sequence

Energy Technology Data Exchange (ETDEWEB)

Ward, L.W.; Hanson, D.J.; Nelson, W.R. (Idaho National Engineering Laboratory, Idaho Falls (USA)); Solberg, D.E. (Nuclear Regulatory Commission, Washington, DC (USA))

1989-11-01

The U.S. Nuclear Regulatory Commission is conducting an accident management research program that emphasizes the use of severe accident research to enhance the ability of plant operating personnel to effectively manage severe accidents. Hence, it is necessary to ensure that the plant instrumentation and information systems adequately provide this information to the operating staff during accident conditions. A methodology to identify and assess the information needs of the operating staff of a nuclear power plant during a severe accident has been developed. The methodology identifies (a) the information needs of the plant personnel during a wide range of accident conditions, (b) the existing plant measurements capable of supplying these information needs and minor additions to instrument and display systems that would enhance management capabilities, (c) measurement capabilities and limitations during severe accident conditions, and (d) areas in which the information systems could mislead plant personnel.

Enhanced Accident Tolerant Fuels for LWRS - A Preliminary Systems Analysis

Energy Technology Data Exchange (ETDEWEB)

Gilles Youinou; R. Sonat Sen

2013-09-01

The severe accident at Fukushima Daiichi nuclear plants illustrates the need for continuous improvements through developing and implementing technologies that contribute to safe, reliable and cost-effective operation of the nuclear fleet. Development of enhanced accident tolerant fuel contributes to this effort. These fuels, in comparison with the standard zircaloy – UO2 system currently used by the LWR industry, should be designed such that they tolerate loss of active cooling in the core for a longer time period (depending on the LWR system and accident scenario) while maintaining or improving the fuel performance during normal operations, operational transients, and design-basis events. This report presents a preliminary systems analysis related to most of these concepts. The potential impacts of these innovative LWR fuels on the front-end of the fuel cycle, on the reactor operation and on the back-end of the fuel cycle are succinctly described without having the pretension of being exhaustive. Since the design of these various concepts is still a work in progress, this analysis can only be preliminary and could be updated as the designs converge on their respective final version.

Application of the Severe Accident Code ATHLET-CD. Coolant injection to primary circuit of a PWR by mobile pump system in case of SBLOCA severe accident scenario

Energy Technology Data Exchange (ETDEWEB)

Jobst, Matthias; Wilhelm, Polina; Kliem, Soeren; Kozmenkov, Yaroslav [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Reactor Safety

2017-06-01

The improvement of the safety of nuclear power plants is a continuously on-going process. The analysis of transients and accidents is an important research topic, which significantly contributes to safety enhancements of existing power plants. In case of an accident with multiple failures of safety systems, core uncovery and heat-up can occur. In order to prevent the accident to turn into a severe one or to mitigate the consequences of severe accidents, different accident management measures can be applied. By means of numerical analyses performed with the compute code ATHLET-CD, the effectiveness of coolant injection with a mobile pump system into the primary circuit of a PWR was studied. According to the analyses, such a system can stop the melt progression if it is activated prior to 10 % of total core is molten.

Application of the Severe Accident Code ATHLET-CD. Coolant injection to primary circuit of a PWR by mobile pump system in case of SBLOCA severe accident scenario

International Nuclear Information System (INIS)

Jobst, Matthias; Wilhelm, Polina; Kliem, Soeren; Kozmenkov, Yaroslav

2017-01-01

The improvement of the safety of nuclear power plants is a continuously on-going process. The analysis of transients and accidents is an important research topic, which significantly contributes to safety enhancements of existing power plants. In case of an accident with multiple failures of safety systems, core uncovery and heat-up can occur. In order to prevent the accident to turn into a severe one or to mitigate the consequences of severe accidents, different accident management measures can be applied. By means of numerical analyses performed with the compute code ATHLET-CD, the effectiveness of coolant injection with a mobile pump system into the primary circuit of a PWR was studied. According to the analyses, such a system can stop the melt progression if it is activated prior to 10 % of total core is molten.

Application of the SPEEDI system to the Chernobyl reactor accident

International Nuclear Information System (INIS)

Chino, Masamichi; Ishikawa, Hirohiko; Yamazawa, Hiromi; Moriuchi, Shigeru

1986-10-01

The SPEEDI system is a computational code system to predict the radiological dose due to the plume released in a nuclear accident in Japan. This paper describes the SPEEDI's application to the Chernobyl reactor accident for the estimation of the movement of plume and the release rate of radioactive nuclides into the environment. The predicted results on the movement of plume agreed well with the monitoring data in Europe. The estimated results on the release rate showed that half of the noble gas inventory, about 5 % of the iodine inventory and about 3 % of the cesium inventory are released into the environment within 24 hours. (author)

Analysis of helium purification system capability during water ingress accident in RDE

Science.gov (United States)

Sriyono; Kusmastuti, Rahayu; Bakhri, Syaiful; Sunaryo, Geni Rina

2018-02-01

The water ingress accident caused by steam generator tube rupture (SGTR) in RDE (Experimental Power Reactor) must be anticipated. During the accident, steam from secondary system diffused and mixed with helium gas in the primary coolant. To avoid graphite corrosion in the core, steam will be removed by Helium purification system (HPS). There are two trains in HPS, first train for normal operation and the second for the regeneration and accident. The second train is responsible to clean the coolant during accident condition. The second train is equipped with additional component, i.e. water cooler, post accident blower, and water separator to remove this mixture gas. During water ingress, the water release from rupture tube is mixed with helium gas. The water cooler acts as a steam condenser, where the steam will be separated by water separator from the helium gas. This paper analyses capability of HPS during water ingress accident. The goal of the research is to determine the time consumed by HPS to remove the total amount of water ingress. The method used is modelling and simulation of the HPS by using ChemCAD software. The BDBA and DBA scenarios will be simulated. In BDBA scenario, up to 110 kg of water is assumed to infiltrate to primary coolant while DBA is up to 35 kg. By using ChemCAD simulation, the second train will purify steam ingress maximum in 0.5 hours. The HPS of RDE has a capability to anticipate the water ingress accident.

Profiling technological failure and disaster in the energy sector: A comparative analysis of historical energy accidents

International Nuclear Information System (INIS)

Sovacool, Benjamin K.; Kryman, Matthew; Laine, Emily

2015-01-01

This study assesses the risk of energy accidents using an original historical dataset over the period 1874-2014, and it evaluates that risk across 11 energy systems: biofuels, biomass, coal, geothermal, hydroelectricity, hydrogen, natural gas, nuclear power, oil, solar energy, and wind energy. Our study shows how these energy systems collectively involved almost 1,100 accidents resulting in more than 210,000 human fatalities and almost $350 billion in property damages. Across the entire sample, the mean amount of property damage was $319 million and 196 fatalities per accident, though when reflected as a median the numbers substantially improve to $3 million in damages per accident and 0 fatalities. We found that wind energy is the most frequent to incur an accident within our sample, accounting for almost one third of accidents. Accidents at hydroelectric dams were the most fatal, accounting for 85 percent of fatalities. Nuclear power accidents are by far the most expensive, accounting for 70 percent of damages. We then utilize this data to test six hypotheses, drawn from the energy studies literature, related to energy systems, energy policy and regulation, and technological learning. - Highlights: • 1085 energy accidents have resulted in 211,529 human fatalities and $344.4 billion in property damages. • Wind energy is the most frequent to incur an accident. • Hydroelectric dam accidents tend to be the most fatal. • Nuclear energy accidents tend to be the most expensive. • Coal, natural gas, and oil are the least likely to incur an accident, when normalized to energy output.

Cesium-134 and cesium-137 in honey bees and cheese samples collected in the U. S. after the Chernobyl accident

Energy Technology Data Exchange (ETDEWEB)

Ford, B C; Jester, W A; Griffith, S M; Morse, R A; Zall, R R; Lisk, D J; Burgett, D M; Bodyfelt, F W

1988-01-01

As a result of the Chernobyl accident on April 25, 1986, possible radioactive contamination of honey bees and cheese sampled in several areas of the United States were measured. Of bees collected in May and June of 1986 in both Oregon and New York, only those from Oregon showed detectable levels of cesium-134 (T1/2 = 2.05 years), a radionuclide which would have originated from the Chernobyl incident. Cheese produced in Oregon and New York before the accident showed only cesium-137 (T1/2 = 30.23 years) but cheese produced afterwards (May and September, 1986) in Oregon contained cesium-134. Cheese produced in Ohio and California at the time of the accident and thereafter contained only cesium-137. In general, the levels of radioactivity were higher in the West coast samples as compared to those taken in the East. The levels of radioactivity detected were considered to be toxicologically of no consequence.

Aerosol challenges to air cleaning systems during severe accidents in nuclear plants

International Nuclear Information System (INIS)

Gieseke, J.A.

1985-01-01

A variety of air cleaning systems may be operating in nuclear power plants and under severe accident conditions, these systems may be treating airborne concentrations of aerosols which are very high. Predictions of airborne aerosol concentrations in nuclear power plant containments under severe accident conditions are reviewed to provide a basis for evaluating the potential effects on the air cleaning systems. The air cleaning systems include filters, absorber beds, sprays, water pools, ice beds, and condensers. Not all of these were intended to operate as air cleaners but will in fact be good aerosol collectors. Knowledge of expected airborne concentrations will allow better evaluation of system performances

Reactor accident diagnostic expert system: DISKET

International Nuclear Information System (INIS)

Yoshida, Kazuo; Yokobayashi, Masao

1989-11-01

A reactor accident diagnostic system DISKET has been developed to identify the cause and the type of an abnormal transient of a nuclear power plant. The system is based on the knowledge engineering and consists of an inference engine IERIAS and a knowledge base. The main features of DISKET are the following: Time-varying characteristics of transient can be treated and knowledge base can be divided into several knowledge units to handle a lot of rules effectively. This report has been provided for the convenience of DISKET's users and consists of three parts. The first part is the description of the whole system, the details of the knowledge base of DISKET are described in the second part, and how to use the DISKET system is explained in the third part. (author)

Development of reactor accident diagnostic system DISKET using knowledge engineering technique

International Nuclear Information System (INIS)

Yokobayashi, Masao; Yoshida, Kazuo; Kohsaka, Atsuo; Yamamoto, Minoru.

1986-01-01

An accident diagnostic system DISKET has been developed to identify the cause and the type of an abnormal transient of a nuclear power plant. The system is based on the knowledge engineering (KE) and consists of an inference engine IERIAS and a knowledge base. The main features of DISKET are the following : (1) Time-varying characteristics of transients can be treated. (2) Knowledge base can be divided into several knowledge units to handle a lot of rules effectively. (3) Programming language UTILISP, which is a dialect of LISP, is used to manipulate symbolic data effectively. For the verification of DISKET, performance tests have been conducted for several types of accidents. The knowledge base used in the tests was generated from the data of various types of transients produced by a PWR plant simulator. The results of verification studies showed a good applicability of DISKET to reactor accident diagnosis. (author)

Study on the code system for the off-site consequences assessment of severe nuclear accident

Energy Technology Data Exchange (ETDEWEB)

Kim, Sora; Mn, Byung Il; Park, Ki Hyun; Yang, Byung Mo; Suh, Kyung Suk [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-12-15

The importance of severe nuclear accidents and probabilistic safety assessment (PSA) were brought to international attention with the occurrence of severe nuclear accidents caused by the extreme natural disaster at Fukushima Daiichi nuclear power plant in Japan. In Korea, studies on level 3 PSA had made little progress until recently. The code systems of level 3 PSA, MACCS2 (MELCORE Accident Consequence Code System 2, US), COSYMA (COde SYstem from MAria, EU) and OSCAAR (Off-Site Consequence Analysis code for Atmospheric Releases in reactor accidents, JAPAN), were reviewed in this study, and the disadvantages and limitations of MACCS2 were also analyzed. Experts from Korea and abroad pointed out that the limitations of MACCS2 include the following: MACCS2 cannot simulate multi-unit accidents/release from spent fuel pools, and its atmospheric dispersion is based on a simple Gaussian plume model. Some of these limitations have been improved in the updated versions of MACCS2. The absence of a marine and aquatic dispersion model and the limited simulating range of food-chain and economic models are also important aspects that need to be improved. This paper is expected to be utilized as basic research material for developing a Korean code system for assessing off-site consequences of severe nuclear accidents.

Study on the code system for the off-site consequences assessment of severe nuclear accident

International Nuclear Information System (INIS)

Kim, Sora; Mn, Byung Il; Park, Ki Hyun; Yang, Byung Mo; Suh, Kyung Suk

2016-01-01

The importance of severe nuclear accidents and probabilistic safety assessment (PSA) were brought to international attention with the occurrence of severe nuclear accidents caused by the extreme natural disaster at Fukushima Daiichi nuclear power plant in Japan. In Korea, studies on level 3 PSA had made little progress until recently. The code systems of level 3 PSA, MACCS2 (MELCORE Accident Consequence Code System 2, US), COSYMA (COde SYstem from MAria, EU) and OSCAAR (Off-Site Consequence Analysis code for Atmospheric Releases in reactor accidents, JAPAN), were reviewed in this study, and the disadvantages and limitations of MACCS2 were also analyzed. Experts from Korea and abroad pointed out that the limitations of MACCS2 include the following: MACCS2 cannot simulate multi-unit accidents/release from spent fuel pools, and its atmospheric dispersion is based on a simple Gaussian plume model. Some of these limitations have been improved in the updated versions of MACCS2. The absence of a marine and aquatic dispersion model and the limited simulating range of food-chain and economic models are also important aspects that need to be improved. This paper is expected to be utilized as basic research material for developing a Korean code system for assessing off-site consequences of severe nuclear accidents

Replacement of the criticality accident alarm system in the Tokai reprocessing plant

International Nuclear Information System (INIS)

Sanada, Yukihisa; Momose, Takumaro; Suzuki, Kei; Kawai, Keiichi

2008-01-01

A Criticality Accident Alarm System (CAAS) was installed as part of criticality safety management for use in reducing the radiation workers could be exposed to in the rare case of a criticality accident. The initial CAAS version was installed the Tokai Reprocessing Plant (TRP) in the 1980s. It includes units that can detect gamma-rays or neutron-rays released in criticality accidents (CADs), one of which consists of three plastic scintillation gamma detectors and three solid state neutron detectors with fissile material, and in being highly reliable utilizes the 2 out of 3 voting system. The purpose of this study is to give the design principles and procedures for determining the adequate relocation of the CADs within the TRP. The optimal places for the CADs to be relocated to were determined using a conservative evaluation method. Firstly, equipment needing to be monitored for criticality accidents was selected with consideration given to the risk of excessive exposure to workers. Secondly, the detection threshold of a minimum accident was set to be an increase in power of 10 15 fissions/s occurring within a rise-time of between 0.5 ms and 1 s. The sum of neutron and gamma doses of a minimum accident (10 15 fissions) was 0.3 Gy at an unshielded distance of 1 m. Finally, doses at where the CADs were installed were evaluated using parameters calculated with MCNP and ANISN. As a result, the alarm trip level of both the gamma detector and the neutron detector being set at 2.0 mGy/h enabled minimum criticality accidents to be conservatively detected. These results were then applied to the new CAD positions. (author)

Improvement of the following accident dose assessment system

Energy Technology Data Exchange (ETDEWEB)

Kim, Enn Han; Han, Moon Hee; Suh, Kyung Suk; Hwang, Won Tae; Choi, Young Gil [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1999-12-15

The FADAS has been updates for calculating the real-time wind fields continuously at the nuclear sites in Korea. The system has been constructed to compute the wind fields using its own process for the dummy meteorological data, and dose not effect on the overall wind field module. If the radioactive materials are released into the atmosphere in real situation, the calculations of wind fields and exposure dose in the previous FADAS are performed in the case of the recognition of the above situation in the source term evaluation module. The current version of FADAS includes the program for evaluating the effect of the predicted accident and the assumed scenario together. The dose assessment module is separated into the real-time and the supposed accident respectively.

Evaluation of severe accident safety system value based on averting financial risks

International Nuclear Information System (INIS)

Hatch, S.W.; Benjamin, A.S.; Bennett, P.R.

1983-01-01

The Severe Accident Risk Reduction Program is being performed to benchmark the risks from nuclear power plants and to assess the benefits and impacts of a set of severe accident safety features. This paper describes the program in general and presents some preliminary results. These results include estimates of the financial risks associated with the operation of six reference plants and the value of severe accident prevention and mitigation safety systems in averting these risks. The results represent initial calculations and will be iterated before being used to support NRC decisions

Centrifugal Filtration System for Severe Accident Source Term Treatment

Energy Technology Data Exchange (ETDEWEB)

Liu, Shu Chang; Yim, Man Sung [KAIST, Daejeon (Korea, Republic of)

2016-05-15

The objective of this paper is to present the conceptual design of a filtration system that can be used to process airborne severe accident source term. Reactor containment may lose its structural integrity due to over-pressurization during a severe accident. This can lead to uncontrolled radioactive releases to the environment. For preventing the dispersion of these uncontrolled radioactive releases to the environment, several ways to capture or mitigate these radioactive source term releases are under investigation at KAIST. Such technologies are based on concepts like a vortex-like air curtain, a chemical spray, and a suction arm. Treatment of the radioactive material captured by these systems would be required, before releasing to environment. For current filtration systems in the nuclear industry, IAEA lists sand, multi-venturi scrubber, high efficiency particulate arresting (HEPA), charcoal and combinations of the above in NS-G-1-10, 4.143. Most if not all of the requirements of the scenario for applying this technology near the containment of an NPP site and the environmental constraints were analyzed for use in the design of the centrifuge filtration system.

The development of a nuclear accident risk information system

International Nuclear Information System (INIS)

Jeong, J. T.; Jeong, W. D.

2001-01-01

The computerized system NARIS (Nuclear Accident Risk Information System) was developed in order to support the estimation of health effects and the establishment the effective risk reduction strategies. Using the system, we can analyze the distribution of health effects easily by displaying the results on the digital map of the site. Also, the thematic mapping allows the diverse analyses of the distribution of the health effects. The NARIS can be used in the emergency operation facilities in order to analyze the distribution of the health effects resulting from the severe accidents of a nuclear power plant. Also, the rapid analysis of the health effect is possible by storing the health effect results in the form of a database. Therefore, the staffs of the emergency operation facilities can establish the rapid and effective emergency response strategies. The module for the optimization of the costs and benefits and the decision making support will be added. The technical support for the establishment of the optimum and effective emergency response strategies will be possible using this system

Analyses of systems availability and operator actions to support the development of severe accident procedures

International Nuclear Information System (INIS)

Lutz, R.J. Jr.; Scobel, J.H.

1989-01-01

This paper reports on traditional analyses of severe accidents, such as those presented in Probabilistic Risk Assessment (PRA) studies of nuclear power stations, that have generally been performed on the assumption that all means of cooling the reactor core are lost and that no operator actions to mitigate the consequences or progression of the severe accident are performed. The assumption to neglect the availability of safety systems and operator actions which do not prevent core melting can lead to erroneous conclusions regarding the plant severer accident profile. Recent work in severe accident management has identified the need to perform analyses which consider all systems availabilities and operator actions, irrespective of their contribution to the prevention of core melting. These new analyses indicate that the traditional analyses result in overfly pessimistic predictions of the time of core melting and the subsequent potential for recovery of core cooling prior to core melting. Additionally, since the traditional analyses do not model all of the operator actions which are prescribed, the impact of additional severe accident operator actions on the progression and consequences of the accident cannot be reliably identified. Further, the more detailed analysis can change the focus of the importance of various system to the prevention of core damage and the mitigation of severe accident consequences. Finally, the simplicity of the traditional analyses can have a considerable impact on severe accident decision making, particularly in the evaluation of alternate plant design features and the priorities for research studies

Passive Decay Heat Removal Strategy of Integrated Passive Safety System (IPSS) for SBO-combined Accidents

Energy Technology Data Exchange (ETDEWEB)

Kim, Sang Ho; Chang, Soon Heung; Jeong, Yong Hoon [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2014-10-15

The weak points of nuclear safety would be in outmoded nuclear power plants like the Fukushima reactors. One of the systems for the safety enhancement is integrated passive safety system (IPSS) proposed after the Fukushima accidents. It has the five functions for the prevention and mitigation of a severe accident. Passive decay heat removal (PDHR) strategy using IPSS is proposed for coping with SBO-combined accidents in this paper. The two systems for removing decay heat before core-melt were applied in the strategy. The accidents were simulated by MARS code. The reference reactor was OPR1000, specifically Ulchin-3 and 4. The accidents included loss-of-coolant accidents (LOCA) because the coolant losses could be occurred in the SBO condition. The examples were the stuck open of PSV, the abnormal open of SDV and the leakage of RCP seal water. Also, as LOCAs with the failure of active safety injection systems were considered, various LOCAs were simulated in SBO. Based on the thermal hydraulic analysis, the probabilistic safety analysis was carried out for the PDHR strategy to estimate the safety enhancement in terms of the variation of core damage frequency. AIMS-PSA developed by KAERI was used for calculating CDF of the plant. The IPSS was applied in the PDHR strategy which was developed in order to cope with the SBO-combined accidents. The estimation for initiating SGGI or PSIS was based on the pressure in RCS. The simulations for accidents showed that the decay heat could be removed for the safety duration time in SBO. The increase of safety duration time from the strategy provides the increase of time for the restoration of AC power.

System Design Strategies of Post-Accident Monitoring System for a PGSFR in Korea

International Nuclear Information System (INIS)

Jang, Gwi-sook; Jeong, Kwang-il; Keum, Jong-yong; Seong, Seung-hwan

2013-06-01

Monitoring systems of a PGSFR (Prototype Gen-IV Sodium-cooled Fast Reactor) in Korea provide alarms, integrity information in the reactor building, sodium-water reaction information in the steam generator, fuel failure information, and supporting information for maintenance and inspection. In particular, a Post-Accident Monitoring System (PAMS) provides primary information for operators to assess the plant conditions and perform their role in bringing the plant to a safe condition during an accident. Some PAM variables can be allocated as more two types. It is important for system designers to confirm the suitability of the selection of PAM variables. In addition, the PAMS is a position 4 display against common cause failures of safety I and C systems. The position 4 display should be independent and diverse from the safety I and C systems. The diversity of safety I and C equipment has led to an increase in the design and verification and validation cost. Thus, this paper proposes the system design strategies on the PAMS design problems of the PGSFR in KOREA. The results will be input into a conceptual system design for the PAMS of the PGSFR in KOREA. (authors)

Highlights from the literature on accident causation and system safety: Review of major ideas, recent contributions, and challenges

Energy Technology Data Exchange (ETDEWEB)

Saleh, J.H., E-mail: jsaleh@gatech.ed [School of Aerospace Engineering, Georgia Institute of Technology (United States); Marais, K.B. [School of Aeronautics and Astronautics, Purdue University (United States); Bakolas, E.; Cowlagi, R.V. [School of Aerospace Engineering, Georgia Institute of Technology (United States)

2010-11-15

This work constitutes a short guide to the extensive but fragmented literature on accident causation and system safety. After briefly motivating the interest in accident causation and discussing the notion of a safety value chain, we delve into our multi-disciplinary review with discussions of Man Made Disasters, Normal Accident, and the High Reliability Organizations (HRO) paradigm. The HRO literature intersects an extensive literature on safety culture, a subject we then briefly touch upon. Following this discussion, we note that while these social and organizational contributions have significantly enriched our understanding of accident causation and system safety, they have important deficiencies and are lacking in their understanding of technical and design drivers of system safety and accident causation. These missing ingredients, we argue, were provided in part by the development of Probabilistic Risk Assessment (PRA). The idea of anticipating possible accident scenarios, based on the system design and configuration, as well as its technical and operational characteristics, constitutes an important contribution of PRA, which builds on and extends earlier contributions made by the development of Fault Tree and Event Tree Analysis. We follow the discussion of PRA with an exposition of the concept of safety barriers and the principle of defense-in-depth, both of which emphasize the functions and 'safety elements [that should be] deliberately inserted' along potential accident trajectories to prevent, contain, or mitigate accidents. Finally, we discuss two ideas that are emerging as foundational in the literature on system safety and accident causation, namely that system safety is a 'control problem', and that it requires a 'system theoretic' approach to be dealt with. We clarify these characterizations and indicate research opportunities to be pursued along these directions. We conclude this work with two general recommendations

Highlights from the literature on accident causation and system safety: Review of major ideas, recent contributions, and challenges

International Nuclear Information System (INIS)

Saleh, J.H.; Marais, K.B.; Bakolas, E.; Cowlagi, R.V.

2010-01-01

This work constitutes a short guide to the extensive but fragmented literature on accident causation and system safety. After briefly motivating the interest in accident causation and discussing the notion of a safety value chain, we delve into our multi-disciplinary review with discussions of Man Made Disasters, Normal Accident, and the High Reliability Organizations (HRO) paradigm. The HRO literature intersects an extensive literature on safety culture, a subject we then briefly touch upon. Following this discussion, we note that while these social and organizational contributions have significantly enriched our understanding of accident causation and system safety, they have important deficiencies and are lacking in their understanding of technical and design drivers of system safety and accident causation. These missing ingredients, we argue, were provided in part by the development of Probabilistic Risk Assessment (PRA). The idea of anticipating possible accident scenarios, based on the system design and configuration, as well as its technical and operational characteristics, constitutes an important contribution of PRA, which builds on and extends earlier contributions made by the development of Fault Tree and Event Tree Analysis. We follow the discussion of PRA with an exposition of the concept of safety barriers and the principle of defense-in-depth, both of which emphasize the functions and 'safety elements [that should be] deliberately inserted' along potential accident trajectories to prevent, contain, or mitigate accidents. Finally, we discuss two ideas that are emerging as foundational in the literature on system safety and accident causation, namely that system safety is a 'control problem', and that it requires a 'system theoretic' approach to be dealt with. We clarify these characterizations and indicate research opportunities to be pursued along these directions. We conclude this work with two general recommendations: (1) that more fundamental

A criticism of ANSI/ANS-8.3-1986: Criticality accident alarm system

International Nuclear Information System (INIS)

Malenfant, R.E.

1991-01-01

The American National Standard on criticality accident alarm systems has given rise to confusion in interpretation and implementation of the requirements. In addition, some of the standards have recently been incorporated into US Department of Energy (DOE) orders, and others have been paraphrased in the DOE orders. Some of the DOE orders referencing these standards are being incorporated into law by means of the Code of Federal Regulations. As such, the intent of the authors of the standards to recommend a code of good practice is now being codified into law with attendant civil and criminal penalties for failure to comply. It is suggested that ANSI/ANS-8.3-1986, Critically Accident Alarm System, be carefully reviewed to alleviate the confusion that has been experienced in practice, to clarify the minimum accident of concern, to further define the dose (or dose rate) criteria for activation, and to stress the fact that a prime consideration in any safety system is the overall reduction of risk

REACTOR: an expert system for diagnosis and treatment of nuclear reactor accidents

International Nuclear Information System (INIS)

Nelson, W.R.

1982-01-01

REACTOR is an expert system under development at EG and G Idaho, Inc., that will assist operators in the diagnosis and treatment of nuclear reactor accidents. This paper covers the background of the nuclear industry and why expert system technology may prove valuable in the reactor control room. Some of the basic features of the REACTOR system are discussed, and future plans for validation and evaluation of REACTOR are presented. The concept of using both event-oriented and function-oriented strategies for accident diagnosis is discussed. The response tree concept for representing expert knowledge is also introduced

Accident tolerant high-pressure helium injection system concept for light water reactors

International Nuclear Information System (INIS)

Massey, Caleb; Miller, James; Vasudevamurthy, Gokul

2016-01-01

Highlights: • Potential helium injection strategy is proposed for LWR accident scenarios. • Multiple injection sites are proposed for current LWR designs. • Proof-of-concept experimentation illustrates potential helium injection benefits. • Computational studies show an increase in pressure vessel blowdown time. • Current LOCA codes have the capability to include helium for feasibility calculations. - Abstract: While the design of advanced accident-tolerant fuels and structural materials continues to remain the primary focus of much research and development pertaining to the integrity of nuclear systems, there is a need for a more immediate, simple, and practical improvement in the severe accident response of current emergency core cooling systems. Current blowdown and reflood methodologies under accident conditions still allow peak cladding temperatures to approach design limits and detrimentally affect the integrity of core components. A high-pressure helium injection concept is presented to enhance accident tolerance by increasing operator response time while maintaining lower peak cladding temperatures under design basis and beyond design basis scenarios. Multiple injection sites are proposed that can be adapted to current light water reactor designs to minimize the need for new infrastructure, and concept feasibility has been investigated through a combination of proof-of-concept experimentation and computational modeling. Proof-of-concept experiments show promising cooling potential using a high-pressure helium injection concept, while the developed choked-flow model shows core depressurization changes with added helium injection. Though the high-pressure helium injection concept shows promise, future research into the evaluation of system feasibility and economics are needed.Classification: L. Safety and risk analysis

Injury protection and accident causation parameters for vulnerable road users based on German In-Depth Accident Study GIDAS.

Science.gov (United States)

Otte, Dietmar; Jänsch, Michael; Haasper, Carl

2012-01-01

Within a study of accident data from GIDAS (German In-Depth Accident Study), vulnerable road users are investigated regarding injury risk in traffic accidents. GIDAS is the largest in-depth accident study in Germany. Due to a well-defined sampling plan, representativeness with respect to the federal statistics is also guaranteed. A hierarchical system ACASS (Accident Causation Analysis with Seven Steps) was developed in GIDAS, describing the human causation factors in a chronological sequence. The accordingly classified causation factors - derived from the systematic of the analysis of human accident causes ("7 steps") - can be used to describe the influence of accident causes on the injury outcome. The bases of the study are accident documentations over ten years from 1999 to 2008 with 8204 vulnerable road users (VRU), of which 3 different groups were selected as pedestrians n=2041, motorcyclists n=2199 and bicyclists n=3964, and analyzed on collisions with cars and trucks as well as vulnerable road users alone. The paper will give a description of the injury pattern and injury mechanisms of accidents. The injury frequencies and severities are pointed out considering different types of VRU and protective measures of helmet and clothes of the human body. The impact points are demonstrated on the car, following to conclusion of protective measures on the vehicle. Existing standards of protection devices as well as interdisciplinary research, including accident and injury statistics, are described. With this paper, a summarization of the existing possibilities on protective measures for pedestrians, bicyclists and motorcyclists is given and discussed by comparison of all three groups of vulnerable road users. Also the relevance of special impact situations and accident causes mainly responsible for severe injuries are pointed out, given the new orientation of research for the avoidance and reduction of accident patterns. 2010 Elsevier Ltd. All rights reserved.

Highly Reliable Power and Communication System for Essential Instruments under a Severe Accident of NPPs

Energy Technology Data Exchange (ETDEWEB)

Yoo, S. J.; Choi, B. H.; Jung, S. Y.; Rim, Chun T. [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2013-10-15

In this paper, three survivable strategies to overcome the problems listed above are proposed for the essential instruments under the severe accident of NPPs. First, wire/wireless multi power systems are adopted to the essential instruments for continuous power supply. Second, wire/wireless communication systems are proposed for reliable transmission of measuring information among instruments and operators. Third, a physical protection system such as a harness and a heat isolation box is introduced to ensure operable conditions for the proposed systems. In this paper, a highly reliable strategy, which consists of wire/wireless multi power and communication systems and physical protection system is proposed to ensure the survival of the essential instruments under harsh external conditions. The wire/wireless multi power and communication systems are designed to transfer power and data in spite of the failure of conventional wired systems. The physical protection system provides operable environments to the instruments. Therefore, the proposed system can be considered as a candidate of practical and urgent remedy for NPPs under the severe accident. After the Fukushima nuclear accident, survivability of essential instruments has been emphasized for immediate and accurate response. The essential instruments can measure environment conditions such as temperature, pressure, radioactivity and corium behavior inside nuclear power plants (NPPs) under a severe accident. Access to the inside of NPPs is restricted to human beings because of hazardous environment such as high radioactivity, high temperature and high pressure. Thus, monitoring the inside of NPPs is necessary for avoiding damage from the severe accident. Even though there were a number of instruments in Fukushima Daiichi NPP, they failed to obtain exact monitoring information. According to the details of the Fukushima nuclear accident, following problems can be counted as strong candidates of this instruments

Highly Reliable Power and Communication System for Essential Instruments under a Severe Accident of NPPs

International Nuclear Information System (INIS)

Yoo, S. J.; Choi, B. H.; Jung, S. Y.; Rim, Chun T.

2013-01-01

In this paper, three survivable strategies to overcome the problems listed above are proposed for the essential instruments under the severe accident of NPPs. First, wire/wireless multi power systems are adopted to the essential instruments for continuous power supply. Second, wire/wireless communication systems are proposed for reliable transmission of measuring information among instruments and operators. Third, a physical protection system such as a harness and a heat isolation box is introduced to ensure operable conditions for the proposed systems. In this paper, a highly reliable strategy, which consists of wire/wireless multi power and communication systems and physical protection system is proposed to ensure the survival of the essential instruments under harsh external conditions. The wire/wireless multi power and communication systems are designed to transfer power and data in spite of the failure of conventional wired systems. The physical protection system provides operable environments to the instruments. Therefore, the proposed system can be considered as a candidate of practical and urgent remedy for NPPs under the severe accident. After the Fukushima nuclear accident, survivability of essential instruments has been emphasized for immediate and accurate response. The essential instruments can measure environment conditions such as temperature, pressure, radioactivity and corium behavior inside nuclear power plants (NPPs) under a severe accident. Access to the inside of NPPs is restricted to human beings because of hazardous environment such as high radioactivity, high temperature and high pressure. Thus, monitoring the inside of NPPs is necessary for avoiding damage from the severe accident. Even though there were a number of instruments in Fukushima Daiichi NPP, they failed to obtain exact monitoring information. According to the details of the Fukushima nuclear accident, following problems can be counted as strong candidates of this instruments

Study on integrated approach of Nuclear Accident Hazard Predicting, Warning, and Optimized Controlling System based on GIS

International Nuclear Information System (INIS)

Tang Lijuan; Huang Shunxiang; Wang Xinming

2012-01-01

The issue of nuclear safety becomes the attention focus of international society after the nuclear accident happened in Fukushima. Aiming at the requirements of the prevention and controlling of Nuclear Accident establishment of Nuclear Accident Hazard Predicting, Warning and optimized Controlling System (NAPWS) is a imperative project that our country and army are desiderating, which includes multiple fields of subject as nuclear physics, atmospheric science, security science, computer science and geographical information technology, etc. Multiplatform, multi-system and multi-mode are integrated effectively based on GIS, accordingly the Predicting, Warning, and Optimized Controlling technology System of Nuclear Accident Hazard is established. (authors)

Description of the information and calculation system for combatment of accidents with hazardous materials

International Nuclear Information System (INIS)

Scheur, M.J. van de; Stolk, D.J.

1987-04-01

On request of the Netherlands government by TNO a decision support system is developed for the assessment of the off-site consequences of an accident with toxic or radioactive materials. The interactive system supports the emergency planning in two ways. First, the risk to the residents in the surroundings of the accident is quantified in terms of severity and magnitude. Second, a set of countermeasures is evaluated by which an optimum strategy to reduce the impact of the accident can be determined. At this moment the system is in a development stage. It turned out that even the preliminary system provides information to the decision process that is urgently needed. This specifically refers to the introduction of the time aspects and the quantification of the damage. 7 refs.; 8 figs.; 3 tabs

Accidents - Chernobyl accident; Accidents - accident de Tchernobyl

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

This file is devoted to the Chernobyl accident. It is divided in four parts. The first part concerns the accident itself and its technical management. The second part is relative to the radiation doses and the different contaminations. The third part reports the sanitary effects, the determinists ones and the stochastic ones. The fourth and last part relates the consequences for the other European countries with the case of France. Through the different parts a point is tackled with the measures taken after the accident by the other countries to manage an accident, the cooperation between the different countries and the groups of research and studies about the reactors safety, and also with the international medical cooperation, specially for the children, everything in relation with the Chernobyl accident. (N.C.)

[Accidents and injuries at work].

Science.gov (United States)

Standke, W

2014-06-01

In the case of an accident at work, the person concerned is insured by law according to the guidelines of the Sozialgesetzbuch VII as far as the injuries have been caused by this accident. The most important source of information on the incident in question is the accident report that has to be sent to the responsible institution for statutory accident insurance and prevention by the employer, if the accident of the injured person is fatal or leads to an incapacity to work for more than 3 days (= reportable accident). Data concerning accidents like these are sent to the Deutsche Gesetzliche Unfallversicherung (DGUV) as part of a random sample survey by the institutions for statutory accident insurance and prevention and are analyzed statistically. Thus the key issues of accidents can be established and used for effective prevention. Although the success of effective accident prevention is undisputed, there were still 919,025 occupational accidents in 2011, with clear gender-related differences. Most occupational accidents involve the upper and lower extremities. Accidents are analyzed comprehensively and the results are published and made available to all interested parties in an effort to improve public awareness of possible accidents. Apart from reportable accidents, data on the new occupational accident pensions are also gathered and analyzed statistically. Thus, additional information is gained on accidents with extremely serious consequences and partly permanent injuries for the accident victims.

EAC european accident code. A modular system of computer programs to simulate LMFBR hypothetical accidents

International Nuclear Information System (INIS)

Wider, H.; Cametti, J.; Clusaz, A.; Devos, J.; VanGoethem, G.; Nguyen, H.; Sola, A.

1985-01-01

One aspect of fast reactor safety analysis consists of calculating the strongly coupled system of physical phenomena which contribute to the reactivity balance in hypothetical whole-core accidents: these phenomena are neutronics, fuel behaviour and heat transfer together with coolant thermohydraulics in single- and two-phase flow. Temperature variations in fuel, coolant and neighbouring structures induce, in fact, thermal reactivity feedbacks which are added up and put in the neutronics calculation to predict the neutron flux and the subsequent heat generation in the reactor. At this point a whole-core analysis code is necessary to examine for any hypothetical transient whether the various feedbacks result effectively in a negative balance, which is the basis condition to ensure stability and safety. The European Accident Code (EAC), developed at the Joint Research Centre of the CEC at Ispra (Italy), fulfills this objective. It is a modular informatics structure (quasi 2-D multichannel approach) aimed at collecting stand-alone computer codes of neutronics, fuel pin mechanics and hydrodynamics, developed both in national laboratories and in the JRC itself. EAC makes these modules interact with each other and produces results for these hypothetical accidents in terms of core damage and total energy release. 10 refs

Iodine removal in containment filtered venting system during nuclear accident

International Nuclear Information System (INIS)

Bera, Subrata; Deo, Anuj Kumar; Nagrale, D.B.; Paul, U.K.; Prasad, M.; Gaikwad, A.J.

2015-01-01

Post Fukushima nuclear accident, containment filtered venting system is being introduced in Indian nuclear power plant to strengthen the defense in depth safety barrier by depressurizing the containment building along with minimization of radioactivity release to environment during a severe accident. Radioactive iodine is one of the major contributors to radiation dose during early release phase of a severe accident. Physical and Chemical form of iodine and iodine bearing compounds includes particulates, elemental and organic. In the most efficient design of CFVS, wet scrubbing mechanism has been employed through use of venture scrubber. The Iodine removal process in wet scrubber involves two processes: chemical reaction in highly alkaline aqueous solution and impingement of particulates with water droplets produced in the venturi nozzle. In this paper, venturi has been modeled using the Calvert model. The variation of efficiency has been estimated for the different particle sizes. The impact of the shape parameter of log-normal distribution on the amount of scrubbed iodine has also been assessed. Release phase wise the scrubbed amount of iodine in the venturi based CFVS system has been estimated for a typical BWR. (author)

An expert system for the quantification of fault rates in construction fall accidents.

Science.gov (United States)

Talat Birgonul, M; Dikmen, Irem; Budayan, Cenk; Demirel, Tuncay

2016-01-01

Expert witness reports, prepared with the aim of quantifying fault rates among parties, play an important role in a court's final decision. However, conflicting fault rates assigned by different expert witness boards lead to iterative objections raised by the related parties. This unfavorable situation mainly originates due to the subjectivity of expert judgments and unavailability of objective information about the causes of accidents. As a solution to this shortcoming, an expert system based on a rule-based system was developed for the quantification of fault rates in construction fall accidents. The aim of developing DsSafe is decreasing the subjectivity inherent in expert witness reports. Eighty-four inspection reports prepared by the official and authorized inspectors were examined and root causes of construction fall accidents in Turkey were identified. Using this information, an evaluation form was designed and submitted to the experts. Experts were asked to evaluate the importance level of the factors that govern fall accidents and determine the fault rates under different scenarios. Based on expert judgments, a rule-based expert system was developed. The accuracy and reliability of DsSafe were tested with real data as obtained from finalized court cases. DsSafe gives satisfactory results.

Control System Radioactive Contamination in Food Samples in Poland

International Nuclear Information System (INIS)

Grabowski, D.; Kurowski, W.; Muszynski, W.; Rubel, B.; Smagala, G.; Swietochowska, J.

2001-01-01

Full text: The analyses of the level of radioactive contamination in food samples are carried out by the Service for Measurements of Radioactive Contamination (SMRC) in Poland. The Service was brought into existence in 1961. The Service comprises of a network of measurement stations and the Centre of Radioactive Contamination Measurements (CRCM). The duty of the Centre is being executed by the Central Laboratory for Radiological Protection (CLRP). The uniform methods of sampling are used in measurement stations. All important foodstuff: milk, meat, vegetables, fruit, cereals are controlled in the Service stations. The radiochemical and spectrometric methods are used to determine the activity of radioactive isotopes. The standard equipment of the measurement station is the measurement system type SAPOS-90 and multichannel analyser with scintillation or germanium detector. The structure of the Service, kinds of samples tested by each station, program of sampling in normal and during accident situation are presented in this paper. (author)

System calculations related to the accident at Three-Mile Island using TRAC

International Nuclear Information System (INIS)

Ireland, J.R.

1980-01-01

The Three Mile Island nuclear plant (Unit 2) was modeled using the Transient Reactor Analysis Code (TRAC-P1A) and a base case calculation, which simulated the initial part of the accident that occurred on March 28, 1979, was performed. In addition to the base case calculation, several parametric calculations were performed in which a single hypothetical change was made in the system conditions, such as assuming the high pressure injection (HPI) system operated as designed rather than as in the accident. Some of the important system parameter comparisons for the base case as well as some of the parametric case results are presented

Qualitative analysis of the man-organization system in accident conditions for nuclear installations

International Nuclear Information System (INIS)

Farcasiu, Mita; Prisecaru, Ilie

2010-01-01

In this paper a model of the human performance investigation of accident conditions in the operation of the nuclear installation is developed. A framework for analyses of the human action in the man-organization system context is achieved. The goal of this model is to identify the possible roots causing human errors which could occur during the evolution of the accident by the qualitative analysis of the interfaces in man-organization system. These interfaces represent the main elements which characterize the implication of the organization in human performance. The results of this paper are the interfaces of the man-organization and their circumstances in which human performance could fail. Also, another result is a pre-designed framework which could help in the investigation of an accident. (authors)

An Ontology-Underpinned Emergency Response System for Water Pollution Accidents

Directory of Open Access Journals (Sweden)

Xiaoliang Meng

2018-02-01

Full Text Available With the unceasing development and maturation of environment geographic information system, the response to water pollution accidents has been digitalized through the combination of monitoring sensors, management servers, and application software. However, most of these systems only achieve the basic and general geospatial data management and functional process tasks by adopting mechanistic water-quality models. To satisfy the sustainable monitoring and real-time emergency response application demand of the government and public users, it is a hotspot to study how to make the water pollution information being semantic and make the referred applications intelligent. Thus, the architecture of the ontology-underpinned emergency response system for water pollution accidents is proposed in this paper. This paper also makes a case study for usability testing of the water ontology models, and emergency response rules through an online water pollution emergency response system. The system contributes scientifically to the safety and sustainability of drinking water by providing emergency response and decision-making to the government and public in a timely manner.

Quantitative Safety Impact of Severe Accident Management Systems for EU-APR during Low Power Shutdown Operation

International Nuclear Information System (INIS)

Lee, Keunsung; Hwang, Do Hun; Chang, Hyun-bin

2016-01-01

In order to enlarge and to diversify the export market of APR1400, the EU-APR design was developed based on the APR1400 design to comply with the latest version of the European Utility Requirements (EUR) revision D. The EU-APR design has the distinguished and advanced severe accident management systems taken from the APR1400 to obtain a containment integrity for the beyond design basis accident, such as the Passive Ex-vessel retaining and Cooling System (PECS), the Severe Accident Containment Spray System (SACSS) and the Containment Filtered Vent System (CFVS). The risk associated with the nuclear power plant can be identified through the Probabilistic Safety Assessment (PSA). In the EUR chapter 1 and 17 of volume 2, the Criteria for Limited Impact (CLI) should be applied to the Level 2 PSA as a risk metrics. The fraction of exceeding CLI for the EU-APR during LPSD operation was calculated as 4.52% of the CDF under the condition that all severe accident management systems are credited. The PECS, SACSS and CFVS are considered as the severe accident management system which is EU-APR dedicated system. The exemption of each system leads to increase the fraction of exceeding CLI to 54.18%, 89.74% and 21.32% respectively. In case if all these systems are unavailable, the fraction of exceeding CLI is increased to 100%. The most effective system is the SACSS that the system reduces containment pressure and temperature

Quantitative Safety Impact of Severe Accident Management Systems for EU-APR during Low Power Shutdown Operation

Energy Technology Data Exchange (ETDEWEB)

Lee, Keunsung; Hwang, Do Hun [KHNP CRI, Daejeon (Korea, Republic of); Chang, Hyun-bin [Future and Challenge Technology Co., Yongin (Korea, Republic of)

2016-10-15

In order to enlarge and to diversify the export market of APR1400, the EU-APR design was developed based on the APR1400 design to comply with the latest version of the European Utility Requirements (EUR) revision D. The EU-APR design has the distinguished and advanced severe accident management systems taken from the APR1400 to obtain a containment integrity for the beyond design basis accident, such as the Passive Ex-vessel retaining and Cooling System (PECS), the Severe Accident Containment Spray System (SACSS) and the Containment Filtered Vent System (CFVS). The risk associated with the nuclear power plant can be identified through the Probabilistic Safety Assessment (PSA). In the EUR chapter 1 and 17 of volume 2, the Criteria for Limited Impact (CLI) should be applied to the Level 2 PSA as a risk metrics. The fraction of exceeding CLI for the EU-APR during LPSD operation was calculated as 4.52% of the CDF under the condition that all severe accident management systems are credited. The PECS, SACSS and CFVS are considered as the severe accident management system which is EU-APR dedicated system. The exemption of each system leads to increase the fraction of exceeding CLI to 54.18%, 89.74% and 21.32% respectively. In case if all these systems are unavailable, the fraction of exceeding CLI is increased to 100%. The most effective system is the SACSS that the system reduces containment pressure and temperature.

Application of the MOLE in post-nuclear accident characterization

International Nuclear Information System (INIS)

Johnson, S.J.; Alvarez, J.L.

1981-01-01

Following a nuclear accident there is a need to determine the chemical composition of materials in liquid, solid and gaseous form, the crystalline structure of solids, the size and chemical composition of particles, and the chemical characterization of contaminants on surfaces. This analytical information is required to reconstruct the accident scenario, to select decontamination methods, and to determine future safety requirements. The MOLE (Molecular Optical Laser Examiner) is a Raman microprobe system which has proven to be a valuable analytical tool in providing this type of chemical information. It can determine the chemical species of polyatomic molecules and ions having characteristic Raman spectra. As little as 1 picogram of a component or a 1 μm particle can be analyzed. The imaging system can also provide mapping of selected components on a surface. A system description, sample handling techniques, and applications are presented. Specific applications to the Three Mile Island-Unit 2 accident are also addressed

An Accident Precursor Analysis Process Tailored for NASA Space Systems

Science.gov (United States)

Groen, Frank; Stamatelatos, Michael; Dezfuli, Homayoon; Maggio, Gaspare

2010-01-01

Accident Precursor Analysis (APA) serves as the bridge between existing risk modeling activities, which are often based on historical or generic failure statistics, and system anomalies, which provide crucial information about the failure mechanisms that are actually operative in the system and which may differ in frequency or type from those in the various models. These discrepancies between the models (perceived risk) and the system (actual risk) provide the leading indication of an underappreciated risk. This paper presents an APA process developed specifically for NASA Earth-to-Orbit space systems. The purpose of the process is to identify and characterize potential sources of system risk as evidenced by anomalous events which, although not necessarily presenting an immediate safety impact, may indicate that an unknown or insufficiently understood risk-significant condition exists in the system. Such anomalous events are considered accident precursors because they signal the potential for severe consequences that may occur in the future, due to causes that are discernible from their occurrence today. Their early identification allows them to be integrated into the overall system risk model used to intbrm decisions relating to safety.

Simultaneous sampling of indoor and outdoor airborne radioactivity after the Fukushima Daiichi nuclear power plant accident.

Science.gov (United States)

Ishikawa, Tetsuo; Sorimachi, Atsuyuki; Arae, Hideki; Sahoo, Sarata Kumar; Janik, Miroslaw; Hosoda, Masahiro; Tokonami, Shinji

2014-02-18

Several studies have estimated inhalation doses for the public because of the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident. Most of them were based on measurement of radioactivity in outdoor air and included the assumption that people stayed outdoors all day. Although this assumption gives a conservative estimate, it is not realistic. The "air decontamination factor" (ratio of indoor to outdoor air radionuclide concentrations) was estimated from simultaneous sampling of radioactivity in both inside and outside air of one building. The building was a workplace and located at the National Institute of Radiological Sciences (NIRS) in Chiba Prefecture, Japan. Aerosol-associated radioactive materials in air were collected onto filters, and the filters were analyzed by γ spectrometry at NIRS. The filter sampling was started on March 15, 2011 and was continued for more than 1 year. Several radionuclides, such as (131)I, (134)Cs, and (137)Cs were found by measuring the filters with a germanium detector. The air decontamination factor was around 0.64 for particulate (131)I and 0.58 for (137)Cs. These values could give implications for the ratio of indoor to outdoor radionuclide concentrations after the FDNPP accident for a similar type of building.

Overview of main accident parameters in car-to-cyclist accidents for use in AEB-system test protocol

NARCIS (Netherlands)

Uittenbogaard, J.; Camp, O.M.G.C. op den; Montfort, S. van

2016-01-01

The number of fatalities in road traffic accidents in Europe is decreasing. Unfortunately, the number of fatalities among cyclists does not follow this trend with the same rate [1]. The au-tomotive industry is making a significant effort in the development and implementation of safety systems in

[Nordic accident classification system used in the Danish National Hospital Registration System to register causes of severe traumatic brain injury].

Science.gov (United States)

Engberg, Aase Worsaa; Penninga, Elisabeth Irene; Teasdale, Thomas William

2007-11-05

The purpose was to illustrate the use of the accident classification system worked out by the Nordic Medico-Statistical Committee (NOMESCO). In particular, registration of causes of severe traumatic brain injury according to the system as part of the Danish National Hospital Registration System was studied. The study comprised 117 patients with very severe traumatic brain injury (TBI) admitted to the Brain Injury Unit of the University Hospital in Hvidovre, Copenhagen, from 1 October 2000 to 30 September 2002. Prospective NOMESCO coding at discharge was compared to independent retrospective coding based on hospital records, and to coding from other wards in the Danish National Hospital Registration System. Furthermore, sets of codes in the Danish National Hospital Registration System for consecutive admissions after a particular accident were compared. Identical results of prospective and independent retrospective coding were found for 65% of 588 single codes, and complete sets of codes for the same accident were identical only in 28% of cases. Sets of codes for the first admission in a hospital course corresponded to retrospective coding at the end of the course in only 17% of cases. Accident code sets from different wards, based on the same injury, were identical in only 7% of cases. Prospective coding by the NOMESCO accident classification system proved problematic, both with regard to correctness and completeness. The system--although logical--seems too complicated compared to the resources invested in the coding. The results of this investigation stress the need for better management and for better instruction to those who carry out the registration.

A Study on the Operation Strategy for Combined Accident including TLOFW accident

International Nuclear Information System (INIS)

Kim, Bo Gyung; Kang, Gook Young; Yoon, Ho Joon

2014-01-01

It is difficult for operators to recognize the necessity of a feed-and-bleed (F-B) operation when the loss of coolant accident and failure of secondary side occur. An F-B operation directly cools down the reactor coolant system (RCS) using the primary cooling system when residual heat removal by the secondary cooling system is not available. The plant is not always necessary the F-B operation when the secondary side is failed. It is not necessary to initiate an F-B operation in the case of a medium or large break because these cases correspond to low RCS pressure sequences when the secondary side is failed. If the break size is too small to sufficiently decrease the RCS pressure, the F-B operation is necessary. Therefore, in the case of a combined accident including a secondary cooling system failure, the provision of clear information will play a critical role in the operators' decision to initiate an F-B operation. This study focuses on the how we establish the operation strategy for combined accident including the failure of secondary side in consideration of plant and operating conditions. Previous studies have usually focused on accidents involving a TLOFW accident. The plant conditions to make the operators confused seriously are usually the combined accident because the ORP only focuses on a single accident and FRP is less familiar with operators. The relationship between CET and PCT under various plant conditions is important to decide the limitation of initiating the F-B operation to prevent core damage

Traffic accidents: an econometric investigation

OpenAIRE

Tito Moreira; Adolfo Sachsida; Loureiro Paulo

2004-01-01

Based on a sample of drivers in Brasilia's streets, this article investigates whether distraction explains traffic accidents. A probit model is estimated to determine the predictive power of several variables on traffic accidents. The main conclusion drawn from this study is that the proxies used to measure distraction, such as the use of cell phones and cigarette smoking in a moving vehicle, are significant factors in determining traffic accidents.

Accidents involving Brazilian indigenous treated at urgent and emergency services of the Unified Health System.

Science.gov (United States)

Souza, Edinilsa Ramos de; Njaine, Kathie; Mascarenhas, Márcio Dênis Medeiros; Oliveira, Maria Conceição de

2016-12-01

Abstract We analyzed the accidents with Brazilian indigenous treated at urgent and emergency services of the Unified Health System (SUS). Data were obtained from the 2014 Viva Survey, which included 86 services from 24 capitals and the Federal District. The demographic profile of the indigenous, the event and the attendance were characterized. Most of the attended people were male in the 20-39 years age group. Falls and traffic accidents were the main reasons for attendance. Alcohol use was informed by 5.6% of the attended people, a figure that increases to 19.1% in traffic accidents, 26.1% among drivers and 22.8% among motorcyclists. There was a statistical difference between genders in relation to age, disability, place of occurrence of the event, work-related event and victim's condition in the traffic accident. We emphasize the importance of providing visibility to accidents with indigenous and engage them in the prevention of such events. Data reliability depends on the adequate completion in indigenous health information systems.

SAMEX: A severe accident management support expert

International Nuclear Information System (INIS)

Park, Soo-Yong; Ahn, Kwang-Il

2010-01-01

A decision support system for use in a severe accident management following an incident at a nuclear power plant is being developed which is aided by a severe accident risk database module and a severe accident management simulation module. The severe accident management support expert (SAMEX) system can provide the various types of diagnostic and predictive assistance based on the real-time plant specific safety parameters. It consists of four major modules as sub-systems: (a) severe accident risk data base module (SARDB), (b) risk-informed severe accident risk data base management module (RI-SARD), (c) severe accident management simulation module (SAMS), and (d) on-line severe accident management guidance module (on-line SAMG). The modules are integrated into a code package that executes within a WINDOWS XP operating environment, using extensive user friendly graphics control. In Korea, the integrated approach of the decision support system is being carried out under the nuclear R and D program planned by the Korean Ministry of Education, Science and Technology (MEST). An objective of the project is to develop the support system which can show a theoretical possibility. If the system is feasible, the project team will recommend the radiation protection technical support center of a national regulatory body to implement a plant specific system, which is applicable to a real accident, for the purpose of immediate and various diagnosis based on the given plant status information and of prediction of an expected accident progression under a severe accident situation.

Differences of detection efficiency among several nasal swab samples simulated for nuclear emergency accident

International Nuclear Information System (INIS)

Fukutsu, Kumiko; Yamada, Yuji; Kurihara, Osamu; Akashi, Makoto; Momose, Takumaro; Miyabe, Kenjiro

2008-01-01

At nuclear emergency accident such as inhalation intake of alpha nuclide, an indispensable nasal swab method has not been used for the precise internal dose estimation. One of the reasons is uncertainty in its radiation measurement, so that precise measurement with alpha spectrometry was examined for filter samples simulating nasal swab. It was confirmed that the alpha spectrometry made possible the distinction between solution and particulate in addition to the nuclide identification. The alpha activity in swab sample was precisely evaluated only when the detection efficiency was determined considering the self-absorption with filter fibers. Another big problem of wiping efficiency in nasal swabbing is still remain, but this study certainly raised the usefulness of the nasal swab method for rapid response in emergency. (author)

Off-gas and air cleaning systems for accident conditions in nuclear power plants

International Nuclear Information System (INIS)

1993-01-01

This report surveys the design principles and strategies for mitigating the consequences of abnormal events in nuclear power plants by the use of air cleaning systems. Equipment intended for use in design basis accident and severe accident conditions is reviewed, with reference to designs used in IAEA Member States. 93 refs, 48 figs, 23 tabs

Chemical dosimetry system for criticality accidents.

Science.gov (United States)

Miljanić, Saveta; Ilijas, Boris

2004-01-01

Ruder Bosković Institute (RBI) criticality dosimetry system consists of a chemical dosimetry system for measuring the total (neutron + gamma) dose, and a thermoluminescent (TL) dosimetry system for a separate determination of the gamma ray component. The use of the chemical dosemeter solution chlorobenzene-ethanol-trimethylpentane (CET) is based on the radiolytic formation of hydrochloric acid, which protonates a pH indicator, thymolsulphonphthalein. The high molar absorptivity of its red form at 552 nm is responsible for a high sensitivity of the system: doses in the range 0.2-15 Gy can be measured. The dosemeter has been designed as a glass ampoule filled with the CET solution and inserted into a pen-shaped plastic holder. For dose determinations, a newly constructed optoelectronic reader has been used. The RBI team took part in the International Intercomparison of Criticality Accident Dosimetry Systems at the SILENE Reactor, Valduc, June 2002, with the CET dosimetry system. For gamma ray dose determination TLD-700 TL detectors were used. The results obtained with CET dosemeter show very good agreement with the reference values.

Possibility of the development of a Serbian protection system against chemical accidents

Directory of Open Access Journals (Sweden)

Dejan R. Inđić

2012-10-01

Full Text Available The paper presents a draft of a system model for responding in case of chemical accidents in accordance with the current legislation regarding the environment protection, the structure and elements of the existing response system in case of chemical accidents, other works dealing with the issue as well as the prospects planned by those responsible for the environmental protection. The paper discuss the possibilities of different institutions and agencies of the Republic of Serbia to engage in specialized methods of cooperation and protection against chemical hazards in accordance with Article X of the Convention on the Prohibition of Chemical Weapons.

School Bus Accidents and Driver Age.

Science.gov (United States)

McMichael, Judith

The study examines the rates and types of school bus accidents according to the age of the school bus driver. Accident rates in North Carolina for the school year 1971-72 were analyzed using three sources of data: accident reports, driver and mileage data, and questionnaires administered to a sample of school bus drivers. Data were obtained on…

Radioactivity measurement for emergency or post-accident situations

International Nuclear Information System (INIS)

Champion, D.

2010-01-01

Specific objectives have to be achieved by radioactivity measurements during emergency or post-accident situations, which are different from those in normal situation. At the beginning of a nuclear emergency, few radioactivity data will be available, mainly from automatic monitoring systems implemented on the site or in its surrounding. Progressively, measurement programmes will be performed, in priority to get information on dose rate, atmospheric radionuclides and surface activities. In order to avoid excessive exposure of the measure teams, these programmes should be optimized. During early post-accident phase, different types of measurements will be done, following two main objectives: 1) to improve the assessment of the environmental contamination and people exposure; 2) for control purpose, to check the contamination of urban places, foodstuff and other products, compared to specific reference levels. The samples measurement in laboratories would be a challenge: usually, the laboratories involved in routine monitoring have to deal with very low level of radioactivity and a poor diversity of artificial radionuclides; after a reactor accident, the environmental samples to be measured would be more active and with a mixture of radionuclides (mainly with short or middle half-life) difficult to be characterized. So theses laboratories have to be trained and organised before any severe accident. (author)

Post-accident cooling capacity analysis of the AP1000 passive spent fuel pool cooling system

International Nuclear Information System (INIS)

Su Xia

2013-01-01

The passive design is used in AP1000 spent fuel pool cooling system. The decay heat of the spent fuel is removed by heating-boiling method, and makeup water is provided passively and continuously to ensure the safety of the spent fuel. Based on the analysis of the post-accident cooling capacity of the spent fuel cooling system, it is found that post-accident first 72-hour cooling under normal refueling condition and emergency full-core offload condition can be maintained by passive makeup from safety water source; 56 hours have to be waited under full core refueling condition to ensure the safety of the core and the spent fuel pool. Long-term cooling could be conducted through reserved safety interface. Makeup measure is available after accident and limited operation is needed. Makeup under control could maintain the spent fuel at sub-critical condition. Compared with traditional spent fuel pool cooling system design, the AP1000 design respond more effectively to LOCA accidents. (authors)

The development of a nuclear accident risk information system(NARIS)

Energy Technology Data Exchange (ETDEWEB)

Jeong, Jong Tae; Jung, Won Dea

2001-03-01

The computerized system, NARIS(Nuclear Accident Risk Information System) was developed in order to support the estimation of health effects and the establishment the effective risk reduction strategies. Using the system, we can analyze the distribution of health effects easily by displaying the results on the digital map of the site. Also, the thematic mapping allows the diverse analysis of the distribution of the health effects.The NARIS can be used in the emergency operation facilities in order to analyze the distribution of the health effects resulting from the severe accidents of a nuclear power plant. Also, the rapid analysis of the health effect is possible by storing the health effect results in the form of a database. Therefore, the staffs of the emergency operation facilities can establish the rapid and effective emergency response strategies. The module for the optimization of the costs and benefits and the decision making support will be added. The technical support for the establishment of the optimum and effective emergency response strategies will be possible using this system.

The development of a nuclear accident risk information system(NARIS)

Energy Technology Data Exchange (ETDEWEB)

Jeong, Jong Tae; Jung, Won Dea [Korea Atomic Energy Research Institute, Taejeon (Korea)

2002-03-01

The computerized system, NARIS(Nuclear Accident Risk Information System) was developed in order to support the estimation of health effects and the establishment the effective risk reduction strategies. Using the system, we can analyze the distribution of health effects easily by displaying the results on the digital map of the site. Also, the thematic mapping allows the diverse analysis of the distribution of the health effects.The NARIS can be used in the emergency operation facilities in order to analyze the distribution of the health effects resulting from the severe accidents of a nuclear power plant. Also, the rapid analysis of the health effect is possible by storing the health effect results in the form of a database. Therefore, the staffs of the emergency operation facilities can establish the rapid and effective emergency response strategies. The module for the optimization of the costs and benefits and the decision making support will be added. The technical support for the establishment of the optimum and effective emergency response strategies will be possible using this system. 23 figs., 1 tab. (Author)

The development of a nuclear accident risk information system(NARIS)

International Nuclear Information System (INIS)

Jeong, Jong Tae; Jung, Won Dea

2001-03-01

The computerized system, NARIS(Nuclear Accident Risk Information System) was developed in order to support the estimation of health effects and the establishment the effective risk reduction strategies. Using the system, we can analyze the distribution of health effects easily by displaying the results on the digital map of the site. Also, the thematic mapping allows the diverse analysis of the distribution of the health effects.The NARIS can be used in the emergency operation facilities in order to analyze the distribution of the health effects resulting from the severe accidents of a nuclear power plant. Also, the rapid analysis of the health effect is possible by storing the health effect results in the form of a database. Therefore, the staffs of the emergency operation facilities can establish the rapid and effective emergency response strategies. The module for the optimization of the costs and benefits and the decision making support will be added. The technical support for the establishment of the optimum and effective emergency response strategies will be possible using this system

Technique of research of severe accidents and substantiation of safety of nuclear systems

International Nuclear Information System (INIS)

Ivanov, E.A.; Tchenov, S.V.

2001-01-01

Work is devoted to development of possible ways of solution of the problems of nuclear safety substantiation. We believe that safety in severe accidents is one of significant factors, which restrict value of nuclear industry in future power production. In connection with it we can conclude followed items: -) Substantiation of safety in severe accidents in nuclear system should be built on a deterministic way of guaranteed exception of heavy consequences; -) It is easy that this aim can be achieved by modeling in functions of common type; -) Main purpose of this work is to show that it is possible to estimate physical allowed state of system in emergency and find of trajectory of heaviest scenarios by optimization procedure; and -) In this work we have developed new method and computer code purposed for study of accident conditions of water cooled un-managed nuclear systems such as cooling ponds of spent fuel, experimental facilities etc. (authors)

Soil sampling and analytical strategies for mapping fallout in nuclear emergencies based on the Fukushima Dai-ichi Nuclear Power Plant accident

International Nuclear Information System (INIS)

Onda, Yuichi; Kato, Hiroaki; Hoshi, Masaharu; Takahashi, Yoshio; Nguyen, Minh-Long

2015-01-01

The Fukushima Dai-ichi Nuclear Power Plant (FDNPP) accident resulted in extensive radioactive contamination of the environment via deposited radionuclides such as radiocesium and 131 I. Evaluating the extent and level of environmental contamination is critical to protecting citizens in affected areas and to planning decontamination efforts. However, a standardized soil sampling protocol is needed in such emergencies to facilitate the collection of large, tractable samples for measuring gamma-emitting radionuclides. In this study, we developed an emergency soil sampling protocol based on preliminary sampling from the FDNPP accident-affected area. We also present the results of a preliminary experiment aimed to evaluate the influence of various procedures (e.g., mixing, number of samples) on measured radioactivity. Results show that sample mixing strongly affects measured radioactivity in soil samples. Furthermore, for homogenization, shaking the plastic sample container at least 150 times or disaggregating soil by hand-rolling in a disposable plastic bag is required. Finally, we determined that five soil samples within a 3 m × 3-m area are the minimum number required for reducing measurement uncertainty in the emergency soil sampling protocol proposed here. - Highlights: • Emergency soil sampling protocol was proposed for nuclear hazards. • Various sampling procedures were tested and evaluated in Fukushima area. • Soil sample mixing procedure was of key importance for measured radioactivity. • Minimum number of sampling was determined for reducing measurement uncertainty

A radioactive waste transportation package monitoring system for normal transport and accident emergency response conditions

International Nuclear Information System (INIS)

Brown, G.S.; Cashwell, J.W.; Apple, M.L.

1993-01-01

This paper addresses spent fuel and high level waste transportation history and prospects, discusses accident histories of radioactive material transport, discusses emergency responder needs and provides a general description of the Transportation Intelligent Monitoring System (TRANSIMS) design. The key objectives of the monitoring system are twofold: (1) to facilitate effective emergency response to accidents involving a radioactive waste transportation package, while minimizing risk to the public and emergency first-response personnel, and (2) to allow remote monitoring of transportation vehicle and payload conditions to enable research into radioactive material transportation for normal and accident conditions. (J.P.N.)

Modular telerobot control system for accident response

Science.gov (United States)

Anderson, Richard J. M.; Shirey, David L.

1999-08-01

The Accident Response Mobile Manipulator System (ARMMS) is a teleoperated emergency response vehicle that deploys two hydraulic manipulators, five cameras, and an array of sensors to the scene of an incident. It is operated from a remote base station that can be situated up to four kilometers away from the site. Recently, a modular telerobot control architecture called SMART was applied to ARMMS to improve the precision, safety, and operability of the manipulators on board. Using SMART, a prototype manipulator control system was developed in a couple of days, and an integrated working system was demonstrated within a couple of months. New capabilities such as camera-frame teleoperation, autonomous tool changeout and dual manipulator control have been incorporated. The final system incorporates twenty-two separate modules and implements seven different behavior modes. This paper describes the integration of SMART into the ARMMS system.

Visualization of Traffic Accidents

Science.gov (United States)

Wang, Jie; Shen, Yuzhong; Khattak, Asad

2010-01-01

Traffic accidents have tremendous impact on society. Annually approximately 6.4 million vehicle accidents are reported by police in the US and nearly half of them result in catastrophic injuries. Visualizations of traffic accidents using geographic information systems (GIS) greatly facilitate handling and analysis of traffic accidents in many aspects. Environmental Systems Research Institute (ESRI), Inc. is the world leader in GIS research and development. ArcGIS, a software package developed by ESRI, has the capabilities to display events associated with a road network, such as accident locations, and pavement quality. But when event locations related to a road network are processed, the existing algorithm used by ArcGIS does not utilize all the information related to the routes of the road network and produces erroneous visualization results of event locations. This software bug causes serious problems for applications in which accurate location information is critical for emergency responses, such as traffic accidents. This paper aims to address this problem and proposes an improved method that utilizes all relevant information of traffic accidents, namely, route number, direction, and mile post, and extracts correct event locations for accurate traffic accident visualization and analysis. The proposed method generates a new shape file for traffic accidents and displays them on top of the existing road network in ArcGIS. Visualization of traffic accidents along Hampton Roads Bridge Tunnel is included to demonstrate the effectiveness of the proposed method.

Assessment of accident energetics in LMFBR core-disruptive accidents

International Nuclear Information System (INIS)

Fauske, H.K.

1977-01-01

An assessment of accident energetics in LMFBR core-disruptive accidents is given with emphasis on the generic issues of energetic recriticality and energetic fuel-coolant interaction events. Application of a few general behavior principles to the oxide-fueled system suggests that such events are highly unlikely following a postulated core meltdown event

Characteristics of Hydrogen Monitoring Systems for Severe Accident Management at a Nuclear Power Plant

Science.gov (United States)

Petrosyan, V. G.; Yeghoyan, E. A.; Grigoryan, A. D.; Petrosyan, A. P.; Movsisyan, M. R.

2018-02-01

One of the main objectives of severe accident management at a nuclear power plant is to protect the integrity of the containment, for which the most serious threat is possible ignition of the generated hydrogen. There should be a monitoring system providing information support of NPP personnel, ensuring data on the current state of a containment gaseous environment and trends in its composition changes. Monitoring systems' requisite characteristics definition issues are considered by the example of a particular power unit. Major characteristics important for proper information support are discussed. Some features of progression of severe accident scenarios at considered power unit are described and a possible influence of the hydrogen concentration monitoring system performance on the information support reliability in a severe accident is analyzed. The analysis results show that the following technical characteristics of the combustible gas monitoring systems are important for the proper information support of NPP personnel in the event of a severe accident at a nuclear power plant: measured parameters, measuring ranges and errors, update rate, minimum detectable concentration of combustible gas, monitoring reference points, environmental qualification parameters of the system components. For NPP power units with WWER-440/270 (230) type reactors, which have a relatively small containment volume, the update period for measurement results is a critical characteristic of the containment combustible gas monitoring system, and the choice of monitoring reference points should be focused not so much on the definition of places of possible hydrogen pockets but rather on the definition of places of a possible combustible mixture formation. It may be necessary for the above-mentioned power units to include in the emergency operating procedures measures aimed at a timely heat removal reduction from the containment environment if there are signs of a severe accident phase

The scenario-based system of workers training to prevent accidents during decommissioning of nuclear facilities

International Nuclear Information System (INIS)

Jeong, KwanSeong; Choi, ByungSeon; Moon, JeiKwon; Hyun, DongJun; Lee, JongHwan; Kim, IkJune; Kim, GeunHo; Seo, JaeSeok

2014-01-01

Highlights: • This paper is meant to develop the training system to prevent accidents during decommissioning of nuclear facilities. • Requirements of the system were suggested. • Data management modules of the system were designed. • The system was developed on virtual reality environment. - Abstract: This paper is meant to develop the training system to prevent accidents during decommissioning of nuclear facilities. Requirements of the system were suggested. Data management modules of the system were designed. The system was developed on virtual reality environment. The performance test of the system was proved to be appropriate to decommissioning of nuclear facilities

Development of training system to prevent accidents during decommissioning of nuclear facilities

International Nuclear Information System (INIS)

Jeong, Kwanseong; Moon, Jeikwon; Choi, Byungseon; Hyun, Dongjun; Lee, Jonghwan; Kim, Ikjune; Kim, Geunho; Seo, Jaeseok

2014-01-01

Decommissioning workers need familiarization with working environments because working environment is under high radioactivity and work difficulty during decommissioning of nuclear facilities. On-the-job training of decommissioning works could effectively train decommissioning workers but this training approach could consume much costs and poor modifications of scenarios. The efficiency of virtual training system could be much better than that of physical training system. This paper was intended to develop the training system to prevent accidents for decommissioning of nuclear facilities. The requirements for the training system were drawn. The data management modules for the training system were designed. The training system of decommissioning workers was developed on the basis of virtual reality which is flexibly modified. The visualization and measurement in the training system were real-time done according as changes of the decommissioning scenario. It can be concluded that this training system enables the subject to improve his familiarization about working environments and to prevent accidents during decommissioning of nuclear facilities

Development of training system to prevent accidents during decommissioning of nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Jeong, Kwanseong; Moon, Jeikwon; Choi, Byungseon; Hyun, Dongjun; Lee, Jonghwan; Kim, Ikjune; Kim, Geunho; Seo, Jaeseok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

Decommissioning workers need familiarization with working environments because working environment is under high radioactivity and work difficulty during decommissioning of nuclear facilities. On-the-job training of decommissioning works could effectively train decommissioning workers but this training approach could consume much costs and poor modifications of scenarios. The efficiency of virtual training system could be much better than that of physical training system. This paper was intended to develop the training system to prevent accidents for decommissioning of nuclear facilities. The requirements for the training system were drawn. The data management modules for the training system were designed. The training system of decommissioning workers was developed on the basis of virtual reality which is flexibly modified. The visualization and measurement in the training system were real-time done according as changes of the decommissioning scenario. It can be concluded that this training system enables the subject to improve his familiarization about working environments and to prevent accidents during decommissioning of nuclear facilities.

Bubble-vacuum system of accident localization of reference nuclear power plant with two WWER's

International Nuclear Information System (INIS)

Sykora, D.; Sykorova, I.

1988-01-01

Higher efficiency of the safety system for removing the consequences of project design accidents and higher radiation safety of a nuclear power plant with two WWER-440 units is the subject of Czechoslovak patent document 243961. The principle consists in interconnecting air chambers which are the end parts of safety systems for the two units. The air chamber is separated from the other parts of the safety system by double swing-check valves or closures. The connecting pipes of the two air chambers do not in any way reduce the reliability of the safety system thanks to their high technical safety and totally passive function. The benefits of the interconnection of the air chambers are given by the fact that it reduces maximum accident overpressure both in the air chambers and in the airtight zones. The reduction of the overpressure reduces the total leakage of radioactive substances and the radiation burden of the environment in case of a nuclear power plant accident. (Z.M.). 2 figs

Application of the accident management information needs methodology to a severe accident sequence

International Nuclear Information System (INIS)

Ward, L.W.; Hanson, D.J.; Nelson, W.R.; Solberg, D.E.

1989-01-01

The U.S. Nuclear Regulatory Commission (NRC) is conducting an Accident Management Research Program that emphasizes the application of severe accident research results to enhance the capability of plant operating personnel to effectively manage severe accidents. A methodology to identify and assess the information needs of the operating staff of a nuclear power plant during a severe accident has been developed as part of the research program designed to resolve this issue. The methodology identifies the information needs of the plant personnel during a wide range of accident conditions, the existing plant measurements capable of supplying these information needs and what, if any minor additions to instrument and display systems would enhance the capability to manage accidents, known limitations on the capability of these measurements to function properly under the conditions that will be present during a wide range of severe accidents, and areas in which the information systems could mislead plant personnel. This paper presents an application of this methodology to a severe accident sequence to demonstrate its use in identifying the information which is available for management of the event. The methodology has been applied to a severe accident sequence in a Pressurized Water Reactor with a large dry containment. An examination of the capability of the existing measurements was then performed to determine whether the information needs can be supplied

Research on alarm triggered fault-diagnosis expert system for U-shaped tube breaking accident of steam generators

International Nuclear Information System (INIS)

Qian Hong; Luo Jianbo; Jin Weixiao; Zhou Jinming; Wang Du

2015-01-01

According to the U-shaped tube breaking accident of steam generator (SGTR), this paper designs a fault-diagnosis expert system based on the alarm triggering. By analyzing the fault mechanism of SGTR accidents, the fault symptom is obtained. The parameters of the belief rule are set up based on the simulation experiment. The information fusion is conducted on the fault-diagnosis results from multiple expert systems to obtain the final diagnose result. The test result shows that the expert system can diagnose the SGTR accident accurately and rapidly, and provide with the operation guidance. (authors)

Causative Chain Difference for each Type of Accidents in Japanese Maritime Traffic Systems (MTS

Directory of Open Access Journals (Sweden)

Wanginingastuti Mutmainnah

2017-09-01

Full Text Available Causative chain (CC is a failure chain that cause accident as an outcome product of the second step of MOP model, namely line relation analysis (LRA. This CC is a connection of several causative factors (CF, an outcome product of first step of MOP model, namely corner analysis (CA. MOP Model is an abbreviation from 4M Overturned Pyramid, created by authors by combining 2 accident analysis models. There are two steps in this model, namely CA and LRA. Utilizing this model can know what is CF that happen dominantly to the accidents and what is a danger CC that characterize accidents in a certain place and certain period. By knowing the characteristics, the preventive action can be decided to decrease the number of accident in the next period. The aim of this paper is providing the development of MOP Model that has been upgraded and understanding the characteristics of each type accident. The data that is analyzed in this paper is Japanese accidents from 2008 until 2013, which is available on Japan Transportation Safety Board (JTSB’s website. The analysis shows that every type of accidents has a unique characteristic, shown by their CFs and CCs. However, Man Factor is still playing role to the system dominantly.

Strategy generation in accident management support

International Nuclear Information System (INIS)

Sirola, M.

1995-01-01

An increased interest for research in the field of Accident Management can be noted. Several international programmes have been started in order to be able to understand the basic physical and chemical phenomena in accident conditions. A feasibility study has shown that it would be possible to design and develop a computerized support system for plant staff in accident situations. To achieve this goal the Halden Project has initiated a research programme on Computerized Accident Management Support (CAMS project). The aim is to utilize the capabilities of computerized tools to support the plant staff during the various accident stages. The system will include identification of the accident state, assessment of the future development of the accident and planning of accident mitigation strategies. A prototype is developed to support operators and the Technical Support Centre in decision making during serious accident in nuclear power plants. A rule based system has been built to take care of the strategy generation. This system assists plant personnel in planning control proposals and mitigation strategies from normal operation to severe accident conditions. The ideal of a safety objective tree and knowledge from the emergency procedures have been used. Future prediction requires good state identification of the plant status and some knowledge about the history of some critical variables. The information needs to be validated as well. Accurate calculations in simulators and a large database including all important information form the plant will help the strategy planning. (author). 12 refs, 2 figs

Systems thinking, the Swiss Cheese Model and accident analysis: a comparative systemic analysis of the Grayrigg train derailment using the ATSB, AcciMap and STAMP models.

Science.gov (United States)

Underwood, Peter; Waterson, Patrick

2014-07-01

The Swiss Cheese Model (SCM) is the most popular accident causation model and is widely used throughout various industries. A debate exists in the research literature over whether the SCM remains a viable tool for accident analysis. Critics of the model suggest that it provides a sequential, oversimplified view of accidents. Conversely, proponents suggest that it embodies the concepts of systems theory, as per the contemporary systemic analysis techniques. The aim of this paper was to consider whether the SCM can provide a systems thinking approach and remain a viable option for accident analysis. To achieve this, the train derailment at Grayrigg was analysed with an SCM-based model (the ATSB accident investigation model) and two systemic accident analysis methods (AcciMap and STAMP). The analysis outputs and usage of the techniques were compared. The findings of the study showed that each model applied the systems thinking approach. However, the ATSB model and AcciMap graphically presented their findings in a more succinct manner, whereas STAMP more clearly embodied the concepts of systems theory. The study suggests that, whilst the selection of an analysis method is subject to trade-offs that practitioners and researchers must make, the SCM remains a viable model for accident analysis. Copyright © 2013 Elsevier Ltd. All rights reserved.

A system of safety management practices and worker engagement for reducing and preventing accidents: an empirical and theoretical investigation.

Science.gov (United States)

Wachter, Jan K; Yorio, Patrick L

2014-07-01

The overall research objective was to theoretically and empirically develop the ideas around a system of safety management practices (ten practices were elaborated), to test their relationship with objective safety statistics (such as accident rates), and to explore how these practices work to achieve positive safety results (accident prevention) through worker engagement. Data were collected using safety manager, supervisor and employee surveys designed to assess and link safety management system practices, employee perceptions resulting from existing practices, and safety performance outcomes. Results indicate the following: there is a significant negative relationship between the presence of ten individual safety management practices, as well as the composite of these practices, with accident rates; there is a significant negative relationship between the level of safety-focused worker emotional and cognitive engagement with accident rates; safety management systems and worker engagement levels can be used individually to predict accident rates; safety management systems can be used to predict worker engagement levels; and worker engagement levels act as mediators between the safety management system and safety performance outcomes (such as accident rates). Even though the presence of safety management system practices is linked with incident reduction and may represent a necessary first-step in accident prevention, safety performance may also depend on mediation by safety-focused cognitive and emotional engagement by workers. Thus, when organizations invest in a safety management system approach to reducing/preventing accidents and improving safety performance, they should also be concerned about winning over the minds and hearts of their workers through human performance-based safety management systems designed to promote and enhance worker engagement. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

A Methodology for Probabilistic Accident Management

International Nuclear Information System (INIS)

Munteanu, Ion; Aldemir, Tunc

2003-01-01

While techniques have been developed to tackle different tasks in accident management, there have been very few attempts to develop an on-line operator assistance tool for accident management and none that can be found in the literature that uses probabilistic arguments, which are important in today's licensing climate. The state/parameter estimation capability of the dynamic system doctor (DSD) approach is combined with the dynamic event-tree generation capability of the integrated safety assessment (ISA) methodology to address this issue. The DSD uses the cell-to-cell mapping technique for system representation that models the system evolution in terms of probability of transitions in time between sets of user-defined parameter/state variable magnitude intervals (cells) within a user-specified time interval (e.g., data sampling interval). The cell-to-cell transition probabilities are obtained from the given system model. The ISA follows the system dynamics in tree form and braches every time a setpoint for system/operator intervention is exceeded. The combined approach (a) can automatically account for uncertainties in the monitored system state, inputs, and modeling uncertainties through the appropriate choice of the cells, as well as providing a probabilistic measure to rank the likelihood of possible system states in view of these uncertainties; (b) allows flexibility in system representation; (c) yields the lower and upper bounds on the estimated values of state variables/parameters as well as their expected values; and (d) leads to fewer branchings in the dynamic event-tree generation. Using a simple but realistic pressurizer model, the potential use of the DSD-ISA methodology for on-line probabilistic accident management is illustrated

Normal accidents

International Nuclear Information System (INIS)

Perrow, C.

1989-01-01

The author has chosen numerous concrete examples to illustrate the hazardousness inherent in high-risk technologies. Starting with the TMI reactor accident in 1979, he shows that it is not only the nuclear energy sector that bears the risk of 'normal accidents', but also quite a number of other technologies and industrial sectors, or research fields. The author refers to the petrochemical industry, shipping, air traffic, large dams, mining activities, and genetic engineering, showing that due to the complexity of the systems and their manifold, rapidly interacting processes, accidents happen that cannot be thoroughly calculated, and hence are unavoidable. (orig./HP) [de

Accident and emergency management

International Nuclear Information System (INIS)

Andersen, V.; Moellenbach, K.; Heinonen, R.; Jakobsson, S.; Kukko, T.; Berg, Oe.; Larsen, J.S.; Westgaard, T.; Magnusson, B.; Andersson, H.; Holmstroem, C.; Brehmer, B.; Allard, R.

1988-06-01

There is an increasing potential for severe accidents as the industrial development tends towards large, centralised production units. In several industries this has led to the formation of large organisations which are prepared for accidents fighting and for emergency management. The functioning of these organisations critically depends upon efficient decision making and exchange of information. This project is aimed at securing and possibly improving the functionality and efficiency of the accident and emergency management by verifying, demonstrating, and validating the possible use of advanced information technology in the organisations mentioned above. With the nuclear industry in focus the project consists of five main activities: 1) The study and detailed analysis of accident and emergency scenarios based on records from incidents and rills in nuclear installations. 2) Development of a conceptual understanding of accident and emergency management with emphasis on distributed decision making, information flow, and control structure sthat are involved. 3) Development of a general experimental methodology for evaluating the effects of different kinds of decision aids and forms of organisation for emergency management systems with distributed decision making. 4) Development and test of a prototype system for a limited part of an accident and emergency organisation to demonstrate the potential use of computer and communication systems, data-base and knowledge base technology, and applications of expert systems and methods used in artificial intelligence. 5) Production of guidelines for the introduction of advanced information technology in the organisations based on evaluation and validation of the prototype system. (author)

Fuel relocation modeling in the SAS4A accident analysis code system

International Nuclear Information System (INIS)

Tentner, A.M.; Miles, K.J.

1985-01-01

SAS4A is a new code system which has been designed for analyzing the initial phase of Hypothetical Core Disruptive Accidents (HCDAs) up to gross melting or failure of the subassembly walls. During such postulated accident scenarios as the Loss-of-Flow (LOF) and Transient-Overpower (TOP) events, the relocation of the fuel plays a key role in determining the sequence of events and the amount of energy produced before neutronic shutdown. This paper discusses the general strategy used in modeling the various phenomena which lead to fuel relocation and presents the key fuel relocation models used in SAS4A. The implications of these models for the whole-core accident analysis as well as recent results of fuel motion experiment analyses are also presented

Fuel relocation modeling in the SAS4A accident analysis code system

International Nuclear Information System (INIS)

Tentner, A.M.; Miles, K.J.; Kalimullah; Hill, D.J.

1986-01-01

The SAS4A code system has been designed for the analysis of the initial phase of Hypothetical Core Disruptive Accidents (HCDAs) up to gross melting or failure of the subassembly walls. During such postulated accident scenarios as the Loss-of-Flow (LOF) and Transient-Overpower (TOP) events, the relocation of the fuel plays a key role in determining the sequence of events and the amount of energy produced before neutronic shutdown. This paper discusses the general strategy used in modelong the various phenomena which lead to fuel relocation and presents the key fuel relocation models used in SAS4A. The implications of these models for the whole-core accident analysis as well as recent results of fuel relocation are emphasized. 12 refs

Use of bayesian operations for diagnosing accidents

International Nuclear Information System (INIS)

Kang, K.M.; Jae, M.; Suh, K.Y.

2005-01-01

In complex systems, it is necessary to model a logical representation of the overall system interaction with respect to the individual subsystems. Operators are allowed to follow EOPs (Emergency Operating Procedures) when reactor tripped because of accidents. But, it's very difficult to diagnose accidents and find out appropriate procedures to mitigate current accidents in a given short time. Even if they diagnose accidents, it also has possibility to misdiagnose. TMI accident is a good example of operators' errors. Methodology using Influence Diagrams has been developed and applied for representing the dependency behaviors and uncertain behaviors of complex systems. An example to diagnose the accidents such as SLOCA and SGTR with similar symptoms has been introduced. From the constructed model, operators could diagnose accidents at any states of accidents. This model can offer the information about accidents with given symptoms. This model might help operators to diagnose correctly and rapidly. It might be very useful to support operators to reduce human error. Also, from this study, it is applicable to diagnose other accidents with similar symptoms and to analyze causes of reactor trip. (authors)

Review of nuclear reactor accidents

International Nuclear Information System (INIS)

Connelly, J.W.; Storr, G.J.

1989-01-01

Two types of severe reactor accidents - loss of coolant or coolant flow and transient overpower (TOP) accidents - are described and compared. Accidents in research reactors are discussed. The 1961 SL1 accident in the US is used as an illustration as it incorporates the three features usually combined in a severe accident - a design flaw or flaws in the system, a circumvention of safety circuits or procedures, and gross operator error. The SL1 reactor, the reactivity accident and the following fuel-coolant interaction and steam explosion are reviewed. 3 figs

Postulated accident conditions for air cleaning systems and radiological dose assessments for containment options

International Nuclear Information System (INIS)

Hilliard, R.K.; Postma, A.K.

1975-01-01

Ambient conditions and performance requirements for emergency air cleaning systems applicable to commercial LMFBR plants were studied. The focus of this study centered on aerosol removal under hypothetical core disruptive accident conditions. Effort completed includes a review of air cleaning systems related to LMFBR plants, selection of three reference containment system designs, postulation of the EACS design basis accident (EACS-DBA), analysis of thermal conditions resulting from the DBA, analysis of aerosol transport behavior following the DBA, and an estimate of bone dose at the site boundary for each of the reference plant designs. Reference plant concepts were a single containment system (e.g., FFTF), a double containment system (e.g., CRBRP with closed head compartment), and a containment-confinement design in which an inerted, sealed primary volume was located within a ventilated building whose exhaust was filtered. The reference design basis accident selected here involved release to the inner containment system of 1 percent of non-volatile solids and plutonium, 25 percent of core halogens, 25 percent of core volatile solids, 100 percent of core noble gases, 68 lbs of sodium vapor and 5000 lbs of liquid sodium. 13 references. (U.S.)

Development of integrated accident management assessment technology

International Nuclear Information System (INIS)

Jung, Won Dea; Ha, Jae Joo; Jin, Young Ho

2002-04-01

This project aims to develop critical technologies for accident management through securing evaluation frameworks and supporting tools, in order to enhance capabilities coping with severe accidents. For the research goal, firstly under the viewpoint of accident prevention, on-line risk monitoring system and the analysis framework for human error have been developed. Secondly, the training/supporting systems including the training simulator and the off-site risk evaluation system have been developed to enhance capabilities coping with severe accidents. Four kinds of research results have been obtained from this project. Firstly, the framework and taxonomy for human error analysis has been developed for accident management. As the second, the supporting system for accident managements has been developed. Using data that are obtained through the evaluation of off-site risk for Younggwang site, the risk database as well as the methodology for optimizing emergency responses has been constructed. As the third, a training support system, SAMAT, has been developed, which can be used as a training simulator for severe accident management. Finally, on-line risk monitoring system, DynaRM, has been developed for Ulchin 3 and 4 unit

Analysis on the Role of RSG-GAS Pool Cooling System during Partial Loss of Heat Sink Accident

Science.gov (United States)

Susyadi; Endiah, P. H.; Sukmanto, D.; Andi, S. E.; Syaiful, B.; Hendro, T.; Geni, R. S.

2018-02-01

RSG-GAS is a 30 MW reactor that is mostly used for radioisotope production and experimental activities. Recently, it is regularly operated at half of its capacity for efficiency reason. During an accident, especially loss of heat sink, the role of its pool cooling system is very important to dump decay heat. An analysis using single failure approach and partial modeling of RELAP5 performed by S. Dibyo, 2010 shows that there is no significant increase in the coolant temperature if this system is properly functioned. However lessons learned from the Fukushima accident revealed that an accident can happen due to multiple failures. Considering ageing of the reactor, in this research the role of pool cooling system is to be investigated for a partial loss of heat sink accident which is at the same time the protection system fails to scram the reactor when being operated at 15 MW. The purpose is to clarify the transient characteristics and the final state of the coolant temperature. The method used is by simulating the system in RELAP5 code. Calculation results shows the pool cooling systems reduce coolant temperature for about 1 K as compared without activating them. The result alsoreveals that when the reactor is being operated at half of its rated power, it is still in safe condition for a partial loss of heat sink accident without scram.

Progress in methodology for probabilistic assessment of accidents: timing of accident sequences

International Nuclear Information System (INIS)

Lanore, J.M.; Villeroux, C.; Bouscatie, F.; Maigret, N.

1981-09-01

There is an important problem for probabilistic studies of accident sequences using the current event tree techniques. Indeed this method does not take into account the dependence in time of the real accident scenarios, involving the random behaviour of the systems (lack or delay in intervention, partial failures, repair, operator actions ...) and the correlated evolution of the physical parameters. A powerful method to perform the probabilistic treatment of these complex sequences (dynamic evolution of systems and associated physics) is Monte-Carlo simulation, very rare events being treated with the help of suitable weighting and biasing techniques. As a practical example the accident sequences related to the loss of the residual heat removal system in a fast breeder reactor has been treated with that method

Assessing economic consequences of radiation accidents

International Nuclear Information System (INIS)

Rowe, M.D.; Lee, J.C.; Grimshaw, C.A.; Kalb, P.D.

1987-01-01

A recent review of existing models and methods for assessing potential consequences of accidents in the high-level radioactive waste (HLW) disposal system identifies economic consequence assessment methods as a weak point. Existing methods have mostly been designed to assess economic consequences of reactor accidents, the possible scale of which can be several orders of magnitude greater than anything possible in the HLW disposal system. There is therefore some question about the applicability of these methods, their assumptions, and their level of detail to assessments of smaller accidents. The US Dept. of Energy funded this study to determine needs for code modifications or model development for assessing economic costs of accidents in the HLW disposal system. The objectives of the study were as follows: (1) review the literature on economic consequences of accidents to determine the availability of assessment methods and data and their applicability to the HLW disposal system before closure. (2) Determine needs for expansion, revision, or adaptation of methods and data for modeling economic consequences of accidents of the scale projected for the disposal system. (3) Gather data that might be useful for the needed revisions for modeling economic impacts on this scale

Modeling of pipe break accident in a district heating system using RELAP5 computer code

International Nuclear Information System (INIS)

Kaliatka, A.; Valinčius, M.

2012-01-01

Reliability of a district heat supply system is a very important factor. However, accidents are inevitable and they occur due to various reasons, therefore it is necessary to have possibility to evaluate the consequences of possible accidents. This paper demonstrated the capabilities of developed district heating network model (for RELAP5 code) to analyze dynamic processes taking place in the network. A pipe break in a water supply line accident scenario in Kaunas city (Lithuania) heating network is presented in this paper. The results of this case study were used to demonstrate a possibility of the break location identification by pressure decrease propagation in the network. -- Highlights: ► Nuclear reactor accident analysis code RELAP5 was applied for accident analysis in a district heating network. ► Pipe break accident scenario in Kaunas city (Lithuania) district heating network has been analyzed. ► An innovative method of pipe break location identification by pressure-time data is proposed.

Design and implementation of an identification system in construction site safety for proactive accident prevention.

Science.gov (United States)

Yang, Huanjia; Chew, David A S; Wu, Weiwei; Zhou, Zhipeng; Li, Qiming

2012-09-01

Identifying accident precursors using real-time identity information has great potential to improve safety performance in construction industry, which is still suffering from day to day records of accident fatality and injury. Based on the requirements analysis for identifying precursor and the discussion of enabling technology solutions for acquiring and sharing real-time automatic identification information on construction site, this paper proposes an identification system design for proactive accident prevention to improve construction site safety. Firstly, a case study is conducted to analyze the automatic identification requirements for identifying accident precursors in construction site. Results show that it mainly consists of three aspects, namely access control, training and inspection information and operation authority. The system is then designed to fulfill these requirements based on ZigBee enabled wireless sensor network (WSN), radio frequency identification (RFID) technology and an integrated ZigBee RFID sensor network structure. At the same time, an information database is also designed and implemented, which includes 15 tables, 54 queries and several reports and forms. In the end, a demonstration system based on the proposed system design is developed as a proof of concept prototype. The contributions of this study include the requirement analysis and technical design of a real-time identity information tracking solution for proactive accident prevention on construction sites. The technical solution proposed in this paper has a significant importance in improving safety performance on construction sites. Moreover, this study can serve as a reference design for future system integrations where more functions, such as environment monitoring and location tracking, can be added. Copyright © 2011 Elsevier Ltd. All rights reserved.

Accidents - Chernobyl accident

International Nuclear Information System (INIS)

2004-01-01

This file is devoted to the Chernobyl accident. It is divided in four parts. The first part concerns the accident itself and its technical management. The second part is relative to the radiation doses and the different contaminations. The third part reports the sanitary effects, the determinists ones and the stochastic ones. The fourth and last part relates the consequences for the other European countries with the case of France. Through the different parts a point is tackled with the measures taken after the accident by the other countries to manage an accident, the cooperation between the different countries and the groups of research and studies about the reactors safety, and also with the international medical cooperation, specially for the children, everything in relation with the Chernobyl accident. (N.C.)

President's Commission and the normal accident

International Nuclear Information System (INIS)

Perrow, C.

1982-01-01

This chapter incorporates the major points of an analysis of the accident at Three Mile Island that I prepared in September 1979. In contrast to the findings of the President's Commission (1979), I did not view the accident as the result of operator error, an inept utility, or a negligent Nuclear Regulatory Commission but as a consequence of the complexity and interdependence that characterize the system itself. I argued that the accident was inevitable-that is, that it could not have been prevented, foreseen, or quickly terminated, because it was incomprehensible. It resembled other accidents in nuclear plants and in other high risk, complex and highly interdependent operator-machine systems; none of the accidents were caused by management or operator ineptness or by poor government regulation, though these characteristics existed and should have been expected. I maintained that the accident was normal, because in complex systems there are bound to be multiple faults that cannot be avoided by planning and that operators cannot immediately comprehend

Analysis of Moderator System Failure Accidents by Using New Method for Wolsong-1 CANDU 6 Reactor

Energy Technology Data Exchange (ETDEWEB)

Jin, Dongsik; Kim, Jonghyun; Cho, Cheonhwey [Atomic Creative Technology Co., Ltd., Daejeon (Korea, Republic of); Kim, Sungmin [Korea Hydro and Nuclear Power Co., Ltd., Daejeon (Korea, Republic of)

2013-05-15

To reconfirm the safety of moderator system failure accidents, the safety analysis by using the reactor physics code, RFSP-IST, coupled with the thermal hydraulics code, CATHENA is performed additionally. In the present paper, the newly developed analysis method is briefly described and the results obtained from the moderator system failure accident simulations for Wolsong-1 CANDU 6 reactor by using the new method are summarized. The safety analysis of the moderator system failure accidents for Wolsong-1 CANDU 6 reactor was carried out by using the new code system, i. e., CATHENA and RFSP-IST, instead of the non-IST old codes, namely, SMOKIN G-2 and MODSTBOIL. The analysis results by using the new method revealed as same with the results by using the old method that the fuel integrity is warranted because the localized power peak remained well below the limits and, most importantly, the reactor operation enters into the self-shutdown mode due to the substantial loss of moderator D{sub 2}O inventory from the moderator system. In the analysis results obtained by using the old method, it was predicted that the ROP trip conditions occurred for the transient cases which are also studied in the present paper. But, in the new method, it was found that the ROP trip conditions did not occur. Consequently, in the safety analysis performed additionally by using the new method, the safety of moderator system failure accidents was reassured. In the future, the new analysis method by using the IST codes instead of the non-IST old codes for the moderator system failure accidents is strongly recommended.

Reactivity Accidents in CAREM-25 Core with and Without Safety Systems Actuation

International Nuclear Information System (INIS)

Gimenez, Marcelo; Vertullo, Alicia; Schlamp, Miguel

2000-01-01

A reactivity accident in CAREM core can be provoked by different initiating events, a cold water injection in pressure vessel, a secondary side steam line breakage and a failure in the absorbing rods drive system.The present work analyses inadverted control rod withdraws transients.Maximum worth control rod (2.5 $) at normal velocity (1 cm/s) is adopted for the simulations (Reactivity ramp of 0.018 $/s).Different scenarios considering actuation of first shutdown system (FSS), second shutdown system (SSS) and selflimiting conditions were modeled.Results of the accident with actuation of FSS show that safety margins are well above critical values (DNBR and CPR).In the cases with failure of the FSS and success of SSS or selflimited, safety margins are below critical values, however, the SSS provides a reduction of elapsed time under advised margins

A radiological accident consequence assessment system for Hong Kong

International Nuclear Information System (INIS)

Wong, M.C.; Lam, H.K.

1993-01-01

An account is given of the Hong Kong Radiological Accident Consequence Assessment System which would be used to assess the potential consequences of an emergency situation involving atmospheric release of radioactive material. The system has the capability to acquire real-time meteorological information from the Observatory's network of automatic stations, synoptic stations in the nearby region as well as forecast data from numerical prediction models. The system makes use of these data to simulate the transport and dispersion of the released radioactive material. The effectiveness of protective action on the local population is also modeled. The system serves as a powerful aid in the protective action recommendation processes

ACCIDENT ANALYSES & CONTROL OPTIONS IN SUPPORT OF THE SLUDGE WATER SYSTEM SAFETY ANALYSIS

Energy Technology Data Exchange (ETDEWEB)

WILLIAMS, J.C.

2003-11-15

This report documents the accident analyses and nuclear safety control options for use in Revision 7 of HNF-SD-WM-SAR-062, ''K Basins Safety Analysis Report'' and Revision 4 of HNF-SD-SNF-TSR-001, ''Technical Safety Requirements - 100 KE and 100 KW Fuel Storage Basins''. These documents will define the authorization basis for Sludge Water System (SWS) operations. This report follows the guidance of DOE-STD-3009-94, ''Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports'', for calculating onsite and offsite consequences. The accident analysis summary is shown in Table ES-1 below. While this document describes and discusses potential control options to either mitigate or prevent the accidents discussed herein, it should be made clear that the final control selection for any accident is determined and presented in HNF-SD-WM-SAR-062.

Virtual system concept aiming at prevention of troubles and accidents

International Nuclear Information System (INIS)

Uchimoto, Tetsuya; Takagi, Toshiyuki

2001-01-01

A main impediment to optimization of the plant maintenance is the fact that we can not predict when and how troubles are introduced in a plant. Having regard to the point, the authors propose a 'virtual system' concept for prevention and prediction of accidents in plants. The virtual system is a system constructed in computers and it evaluates responses to various loads of the object system. The authors introduce the resistance to loads and the testing availability as key parameters characterizing object sub-systems and place their evaluation as the first step of construction of the virtual system. (author)

The consequences of the Chernobyl nuclear accident in Greece

International Nuclear Information System (INIS)

1986-07-01

In this report the radioactive fallout on Greece from the Chernobyl nuclear accident is described. The flow pattern to Greece of the radioactive materials released, the measurements performed on environmental samples and samples of the food chain, as well as some estimations of the population doses and of the expected consequences of the accident are presented. The analysis has shown that the radiological impact of the accident in Greece can be considered minor. (J.K.)

Modelling and forecasting occupational accidents of different severity levels in Spain

International Nuclear Information System (INIS)

Carmen Carnero, Maria; Jose Pedregal, Diego

2010-01-01

The control of accidents at the work place is a critical issue all over the world. The consequences of occupational accidents in terms of costs for the company in which the accidents take place is only one minor matter, being the social impact and the loss of human life the most controversial effects of this important problem. The methods used to forecast future evolution of accidents are often limited to trend estimations and projections, being the scientific literature on this topic rather scarce. This paper aims at showing and predicting the evolution of Spanish occupational accidents of different levels of severity, allowing the evaluation of the influence that preventive actions carried out by public administrations or private companies may have over the number of occupational accidents. Though some contributions may be found on this topic for Spain, this paper is the first contribution that forecast occupational accidents for different levels of severity using Multivariate Unobserved Components models developed in a State Space framework extended to deal with the irregular sampling interval of the data. Data from 1998 to 2009 have been used to test the efficacy of the forecasting system.

Current statistical tools, systems and bodies concerned with safety and accident statistics.

NARCIS (Netherlands)

Koornstra, M.J.

1996-01-01

There are a wide range of differences in the methods used nationally to classify and record road accidents. The current use of road safety information systems and the few systems available for international use are discussed. Recommendations are made for a more efficient, less costly, and improved

Development of high-performance monitoring system under severe accident condition

International Nuclear Information System (INIS)

Takeuchi, Tomoaki; Tsuchiya, Kunihiro; Ishihara, Masahiro; Komanome, H.; Miura, K.

2017-01-01

A research and development of a monitoring system for NPPs situations even during severe accidents have been performed. The R and D consists of the three objectives. The major findings are briefly summarized in the followings: 1) Radiation-resistant monitoring camera. The image sensor with the photogate and three transistors was found to be advantageous in terms of dark current and sensitivity. In addition, radiation-resistant optical parts and signal circuits were successfully fabricated. The results suggested that the monitoring camera system with 10 6 Gy in radiation resistance was possible. 2) Radiation-resistant in-water wireless transmission system. A two-dimensional LED matrix with 10 6 Gy in radiation resistance and a camera were used as the transmission devices. The results of the in-water transmission tests suggested that stable wireless transmission between 5 m distance was possible even with bubble, turbidity, or obstacles. 3) Heat-resistant signal cable. In order to develop a cable that can transmit the data inside reactor pressure vessels, heat-proof tests were performed for candidate metallic sheath materials of mineral insulation (MI) cables. The results indicated MI cables which can be used at 1000degC in air were possible. These results indicate the feasibility of the monitoring system even during severe accidents. (author)

Early air sampling in Higashi-Hiroshima after the Fukushima Daiichi Nuclear Power Plant accident and subsequent sampling in Minami-Souma City from October 2011 to September 2012

International Nuclear Information System (INIS)

Shizuma, Kiyoshi; Kajimoto, Tsuyoshi; Endo, Satoru

2013-01-01

Soon after the accident that occurred at the Fukushima Daiichi Nuclear Power Plant on March 11, 2011, air sampling was performed in Higashi-Hiroshima (about 800 km from Fukushima). The sampling began on March 20, and a high-volume air sampler was used. The first radionuclide observed was "1"3"1I (on March 30), and "1"3"7Cs, "1"3"4Cs, "1"3"6Cs, and "1"3"2Te were observed thereafter. According to the sampling, the maximum concentration in the air occurred on April 7 and again on April 18. After April 30, no radionuclides released due to the accident were observed. Since "1"3"7Cs and "1"3"4Cs have a long half-life (30 and 2 y, respectively), all of the air filters were measured again in February through March of 2012 using a well-type Ge detector. The results of these measurements showed that "1"3"7Cs was already observed on March 21. Later on, air sampling was performed at Minami-Souma City, Fukushima (October 2011 to September 2012). The purpose of this sampling was to investigate whether any radionuclides were released from the forest and flew up into the air from the ground, or were carried by the wind in winter or via pollen in spring. Results showed that the radioactive concentration was quite low and no seasonal variation occurred, indicating that no radionuclides flew up into the air from the ground, nor were any released from the forest via wind or pollen. (author)

Essential severe accident mitigation measures for operating and future PWR's

Energy Technology Data Exchange (ETDEWEB)

Bittermann, Dietmar; Eckardt, Bernd A.; Lechleuthner, Michael [Framatome ANP GmbH, Erlangen (Germany)

2003-04-01

Severe Accident mitigation measures are a constituent of the safety concept in Europe not only for operating but also for future light water reactors. While operating reactors mainly have been backfitted with such measure, for future reactors Severe Accident mitigation measures already have to be considered in the design phase. Severe Accident measures are considered as the 4{sup th} level of defense for future reactors. This difference has consequences also on the kind of measures proposed to be introduced. While in operating plants Severe Accident mitigation measures are considered for further risk reduction, in future reactors an explicit higher level of safety is required resulting in additional design measures. This higher safety level is expressed in the requirement that there must be no need for evacuation of surrounding populations except in the immediate vicinity of the plant and for long-term restrictions with regard to the consumption of locally grown food. Because of the potential hazard posed by radioactive releases to the environment in the event of an Severe Accident situation depends largely on the airborne material in the containment atmosphere and on the containment integrity, new system features to prevent loss of containment integrity have been introduced in the design of the NPP's. For these tasks it has been necessary to develop and qualify new system technologies and implement them finally into NPP's, e.g. like systems for containment atmosphere H{sub 2}-control, filtered venting, core retention devices and atmosphere sampling. The following systems are introduced for operating as well as for future plants: {center_dot} The Hydrogen Control System is based on the Passive Autocatalytic Recombiner (PAR) technology. There is no need for any operator actions because of the self-starting feature of the catalyst if hydrogen is released. {center_dot} In situ Post Accident Sampling System (In situ-PASS) are introduced for the purpose of

Feature article. Fukushima Daiichi NPP accident

International Nuclear Information System (INIS)

Ekarinai, Masashi; Ake, Yutaka; Narabayashi, Tadashi

2011-01-01

This special feature article consisted of five reports and the minutes of emergency discussion meeting on Fukushima Daiichi Nuclear Power Plant (NPP) accident. Effects of the accident on future electricity supply of electric utilities and also on business development of nuclear industries were discussed. Activities of senior network team of atomic energy society of Japan (AESJ) to conduct severe accident analysis and early restoration from the accident were introduced. Circulating injection reactor cooling system and zeolite decontamination system of accumulated contaminated water was proposed. Effects of the accident on overseas reaction on nuclear development were also reported as well as personal experience of the professor in the US west coast on communications. (T. Tanaka)

Some aspects of thyroid system status in persons exposed to the Chernobyl accident

International Nuclear Information System (INIS)

Cheban, A.K.; Afanasyev, D.E.; Boyarskaya, O.Y.

1997-01-01

The thyroid system status estimation held in post-accidental period dynamics among 7868 children evacuated from the 30-km Chernobyl zone and resident now in Slavutich city (Cs-137 contaminated area), among contaminated regions permanent residents, among native kievites and evacuated from 30-km zone. The thyroid pathology incidence dependence on residence place during Chernobyl Accident and after that was revealed. The immune-inflammatory thyroid disorders are characteristic for 30-km zone migrants, goitre different forms - for the radionuclides contaminated territories residents. No thyroid function abnormalities frequency confidential increase was registered during the research activities run. The total serum cholesterol level application unavailability is revealed in Chernobyl accident survivors thyroid hormones metabolic effects estimation. Data concerning Chernobyl accident consequences cleaning up participants (CACCP) presented additionally. (author)

From learning from accidents to teaching about accident causation and prevention: Multidisciplinary education and safety literacy for all engineering students

International Nuclear Information System (INIS)

Saleh, Joseph H.; Pendley, Cynthia C.

2012-01-01

In this work, we argue that system accident literacy and safety competence should be an essential part of the intellectual toolkit of all engineering students. We discuss why such competence should be taught and nurtured in engineering students, and provide one example for how this can be done. We first define the class of adverse events of interest as system accidents, distinct from occupational accidents, through their (1) temporal depth of causality and (2) diversity of agency or groups and individuals who influence or contribute to the accident occurrence/prevention. We then address the question of why the interest in this class of events and their prevention, and we expand on the importance of system safety literacy and the contributions that engineering students can make in the long-term towards accident prevention. Finally, we offer one model for an introductory course on accident causation and system safety, discuss the course logistics, material and delivery, and our experience teaching this subject. The course starts with the anatomy of accidents and is grounded in various case studies; these help illustrate the multidisciplinary nature of the subject, and provide the students with the important concepts to describe the phenomenology of accidents (e.g., initiating events, accident precursor or lead indicator, and accident pathogen). More importantly, the case studies invite a deep reflection on the underlying failure mechanisms, their generalizability, and the various safety levers for accident prevention. The course then proceeds to an exposition of defense-in-depth, safety barriers and principles, essential elements for an education in accident prevention, and it concludes with a presentation of basic concepts and tools for uncertainty and risk analysis. Educators will recognize the difficulties in designing a new course on such a broad subject. It is hoped that this work will invite comments and contributions from the readers, and that the journal will

Applicability of simplified methods to evaluate consequences of criticality accident using past accident data

International Nuclear Information System (INIS)

Nakajima, Ken

2003-01-01

Applicability of four simplified methods to evaluate the consequences of criticality accident was investigated. Fissions in the initial burst and total fissions were evaluated using the simplified methods and those results were compared with the past accident data. The simplified methods give the number of fissions in the initial burst as a function of solution volume; however the accident data did not show such tendency. This would be caused by the lack of accident data for the initial burst with high accuracy. For total fissions, simplified almost reproduced the upper envelope of the accidents. However several accidents, which were beyond the applicable conditions, resulted in the larger total fissions than the evaluations. In particular, the Tokai-mura accident in 1999 gave in the largest total specific fissions, because the activation of cooling system brought the relatively high power for a long time. (author)

Uncertainties and severe-accident management

International Nuclear Information System (INIS)

Kastenberg, W.E.

1991-01-01

Severe-accident management can be defined as the use of existing and or alternative resources, systems, and actions to prevent or mitigate a core-melt accident. Together with risk management (e.g., changes in plant operation and/or addition of equipment) and emergency planning (off-site actions), accident management provides an extension of the defense-indepth safety philosophy for severe accidents. A significant number of probabilistic safety assessments have been completed, which yield the principal plant vulnerabilities, and can be categorized as (a) dominant sequences with respect to core-melt frequency, (b) dominant sequences with respect to various risk measures, (c) dominant threats that challenge safety functions, and (d) dominant threats with respect to failure of safety systems. Severe-accident management strategies can be generically classified as (a) use of alternative resources, (b) use of alternative equipment, and (c) use of alternative actions. For each sequence/threat and each combination of strategy, there may be several options available to the operator. Each strategy/option involves phenomenological and operational considerations regarding uncertainty. These include (a) uncertainty in key phenomena, (b) uncertainty in operator behavior, (c) uncertainty in system availability and behavior, and (d) uncertainty in information availability (i.e., instrumentation). This paper focuses on phenomenological uncertainties associated with severe-accident management strategies

Investigation of air cleaning system response to accident conditions

International Nuclear Information System (INIS)

Andrae, R.W.; Bolstad, J.W.; Foster, R.D.; Gregory, W.S.; Horak, H.L.; Idar, E.S.; Martin, R.A.; Ricketts, C.I.; Smith, P.R.; Tang, P.K.

1980-01-01

Air cleaning system response to the stress of accident conditions are being investigated. A program overview and hghlight recent results of our investigation are presented. The program includes both analytical and experimental investigations. Computer codes for predicting effects of tornados, explosions, fires, and material transport are described. The test facilities used to obtain supportive experimental data to define structural integrity and confinement effectiveness of ventilation system components are described. Examples of experimental results for code verification, blower response to tornado transients, and filter response to tornado and explosion transients are reported

Accident identification system with automatic detection of abnormal condition using quantum computation

International Nuclear Information System (INIS)

Nicolau, Andressa dos Santos; Schirru, Roberto; Lima, Alan Miranda Monteiro de

2011-01-01

Transient identification systems have been proposed in order to maintain the plant operating in safe conditions and help operators in make decisions in emergency short time interval with maximum certainty associated. This article presents a system, time independent and without the use of an event that can be used as a starting point for t = 0 (reactor scram, for instance), for transient/accident identification of a pressurized water nuclear reactor (PWR). The model was developed in order to be able to recognize the normal condition and three accidents of the design basis list of the Nuclear Power Plant Angra 2, postulated in the Final Safety Analysis Report (FSAR). Were used several sets of process variables in order to establish a minimum set of variables considered necessary and sufficient. The optimization step of the identification algorithm is based upon the paradigm of Quantum Computing. In this case, the optimization metaheuristic Quantum Inspired Evolutionary Algorithm (QEA) was implemented and works as a data mining tool. The results obtained with the QEA without the time variable are compatible to the techniques in the reference literature, for the transient identification problem, with less computational effort (number of evaluations). This system allows a solution that approximates the ideal solution, the Voronoi Vectors with only one partition for the classes of accidents with robustness. (author)

Radiological aspects of nuclear accident scenarios. Volume 2 the Rade-Aid system post-Chernobyl action

International Nuclear Information System (INIS)

Sinnaeve, J.

1991-01-01

In the event of a nuclear accident, there is a need for a rapid assessment of the resulting levels of environmental contamination in order to facilitate decisions on possible countermeasures. Volume 2 describes the RADE-AID project to develop a computer system which can be used to support the formulation of decisions on countermeasures following an accidental release of radionuclides. The system is intended as an aid following an actual accident and a tool for assistance in planning and training

Casebook on electric safety accidents

International Nuclear Information System (INIS)

1987-09-01

This book gives concentration on electric safety accidents in domestic and abroad, which introduces general electrical safety with property of electricity, safe equipment and maintenance and protection of electric shock. It lists the cases of accident caused of electricity in domestic like accident in power substation, utilization equipment, load system and another accident by electricity like death in electric shock another by electricity like death in electric shock in new building construction, the cases caused of electricity in abroad like damage in electric shock by high voltage electric transformer, electric shock in summer and earth fault accident by fault cooling tower.

Evaluation of severe accident risks, Grand Gulf, Unit 1: Appendices

International Nuclear Information System (INIS)

Brown, T.D.; Breeding, R.J.; Jow, H.N.; Higgins, S.J.; Shiver, A.W.; Helton, J.C.; Amos, C.N.

1990-12-01

In support of the Nuclear Regulatory Commission's (NRC's) assessment of the risk from severe accidents at commercial nuclear power plants in the US report in NUREG-1150, the Severe Accident Risk Reduction Program (SARRP) has completed a revised calculation of the risk to the general public from severe accidents at the Grand Gulf Nuclear Station, Unit 1. This power plant, located in Port Gibson, Mississippi, is operated by the System Energy Resources, Inc. (SERI). The emphasis in this risk analysis was not on determining a ''so-called'' point estimate of risk. Rather, it was to determine the distribution of risk, and to discover the uncertainties that account for the breadth of this distribution. Off-site risk initiated by events internal to the power plant was assessed. This document provides Appendices A through E for this report. Topics included are, respectively: supporting information for the accident progression analysis; supporting information for the source term analysis; supporting information for the consequence analysis; risk results; and sampling information

Interfacing systems loss of coolant accident (ISLOCA) pressure capacity methodology and Davis-Besse results

International Nuclear Information System (INIS)

Wesley, D.A.

1991-01-01

A loss of coolant accident resulting from the overpressurization by reactor coolant fluid of a system designed for low-pressure, low-temperature service has been identified as a potential contributor to nuclear power plant risk. In this paper, the methodology developed to assess the probability of failure as a function of internal pressure is presented, and sample results developed for the controlling failure modes and locations of four fluid systems at the Davis-Besse Plant are shown. Included in this evaluation are the tanks, heat exchangers, filters, pumps, valves, and flanged connections for each system. The variability in the probability of failure is included, and the estimated leak rates or leak areas are given for the controlling modes of failure. For this evaluation, all failures are based on quasistatic pressures since the probability of dynamic effects resulting from such causes as water hammer have been initially judged to be negligible for the Davis-Besse plant ISLOCA

Estimation of fatality and injury risk by means of in-depth fatal accident investigation data.

Science.gov (United States)

Yannis, George; Papadimitriou, Eleonora; Dupont, Emmanuelle; Martensen, Heike

2010-10-01

In this article the factors affecting fatality and injury risk of road users involved in fatal accidents are analyzed by means of in-depth accident investigation data, with emphasis on parameters not extensively explored in previous research. A fatal accident investigation (FAI) database is used, which includes intermediate-level in-depth data for a harmonized representative sample of 1300 fatal accidents in 7 European countries. The FAI database offers improved potential for analysis, because it includes information on a number of variables that are seldom available, complete, or accurately recorded in road accident databases. However, the fact that only fatal accidents are examined requires for methodological adjustments, namely, the correction for two types of effects on a road user's baseline risk: "accident size" effects, and "relative vulnerability" effects. Fatality and injury risk can be then modeled through multilevel logistic regression models, which account for the hierarchical dependences of the road accident process. The results show that the baseline fatality risk of road users involved in fatal accidents decreases with accident size and increases with the vulnerability of the road user. On the contrary, accident size increases nonfatal injury risk of road users involved in fatal accidents. Other significant effects on fatality and injury risk in fatal accidents include road user age, vehicle type, speed limit, the chain of accident events, vehicle maneuver, and safety equipment. In particular, the presence and use of safety equipment such as seat belt, antilock braking system (ABS), and electronic stability program (ESP) are protection factors for car occupants, especially for those seated at the front seats. Although ABS and ESP systems are typically associated with positive effects on accident occurrence, the results of this research revealed significant related effects on accident severity as well. Moreover, accident consequences are more severe

Methyl iodide trapping efficiency of aged charcoal samples from Bruce-A emergency filtered air discharge systems

International Nuclear Information System (INIS)

Wren, J.C.; Moore, C.J.; Rasmussenn, M.T.; Weaver, K.R.

1999-01-01

Charcoal filters are installed in the emergency filtered air discharge system (EFADS) of multiunit stations to control the release of airborne radioiodine in the event of a reactor accident. These filters use highly activated charcoal impregnated with triethylenediamine (TEDA). The TEDA-impregnated charcoal is highly efficient in removing radioiodine from flowing airstreams. The iodine-removal efficiency of the charcoal is presumed to deteriorate slowly with age, but current knowledge of this effect is insufficient to predict with confidence the performance of aged charcoal following an accident. Experiments were performed to determine the methyl iodide removal efficiency of aged charcoal samples taken from the EFADS of Ontario Hydro's Bruce-A nuclear generating station. The charcoal had been in service for ∼4 yr. The adsorption rate constant and capacity were measured under post-loss-of-coolant accident conditions to determine the efficiency of the aged charcoal. The adsorption rate constants of the aged charcoal samples were observed to be extremely high, yielding a decontamination factor (DF) for a 20-cm-deep bed of the aged charcoal >1 X 10 15 . The results show that essentially no CH 3 I would escape from a 20-cm-deep bed of the aged charcoal and that the requirement for a DF of 1000 for organic iodides in the EFADS filters would be exceeded by a tremendous margin. With such high DFs, the release of iodine from a 20-cm-deep bed would be virtually impossible to detect. The adsorption capacities observed for the aged charcoal samples approach the theoretical chemisorption capacity of 5 wt% TEDA charcoal, indicating that aging in the EFADS for 4 yr has had a negligible impact on the adsorption capacity. The results indicate that the short- and long-term performances of the aged charcoal in the EFADS of Bruce-A following an accident would still far exceed performance requirements. (author)

1983 international intercomparison of nuclear accident dosimetry systems at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Swaja, R.E.; Greene, R.T.; Sims, C.S.

1985-04-01

An international intercomparison of nuclear accident dosimetry systems was conducted during September 12-16, 1983, at Oak Ridge National Laboratory (ORNL) using the Health Physics Research Reactor operated in the pulse mode to simulate criticality accidents. This study marked the twentieth in a series of annual accident dosimetry intercomparisons conducted at ORNL. Participants from ten organizations attended this intercomparison and measured neutron and gamma doses at area monitoring stations and on phantoms for three different shield conditions. Results of this study indicate that foil activation techniques are the most popular and accurate method of determining accident-level neutron doses at area monitoring stations. For personnel monitoring, foil activation, blood sodium activation, and thermoluminescent (TL) methods are all capable of providing accurate dose estimates in a variety of radiation fields. All participants in this study used TLD's to determine gamma doses with very good results on the average. Chemical dosemeters were also shown to be capable of yielding accurate estimates of total neutron plus gamma doses in a variety of radiation fields. While 83% of all neutron measurements satisfied regulatory standards relative to reference values, only 39% of all gamma results satisfied corresponding guidelines for gamma measurements. These results indicate that continued improvement in accident dosimetry evaluation and measurement techniques is needed

Upgrading the electrical system of the IEA-R1 reactor to avoid triggering event of accidents

International Nuclear Information System (INIS)

Mello, Jose Roberto de; Madi Filho, Tufic

2015-01-01

The IEA-R1 research reactor at the Institute of Energy and Nuclear Research (IPEN) is a research reactor open pool type, built and designed by the American firm 'Babcox and Wilcox', having as coolant and moderator demineralized light water and Beryllium and graphite, as reflectors. The power supply system is designed to meet the electricity demand required by the loads of the reactor (Security systems and systems not related to security) in different situations the plant can meet, such as during startup, normal operation at power, shutdown, maintenance, exchange of fuel elements and accident situations. Studies have been done on possible accident initiating events and deterministic techniques were applied to assess the consequences of such incidents. Thus, the methods used to identify and select the accident initiating events, the methods of analysis of accidents, including sequence of events, transient analysis and radiological consequences, have been described. Finally, acceptance criteria of radiological doses are described. Only a brief summary of the item concerning loss of electrical power will be presented. The loss of normal electrical power at the IEA-R1 reactor is very common. In the case of Electric External Power Loss, at the IEA-R1 reactor building, there may be different sequences of events, as described below. When the supply of external energy in the IEA-R1 facility fails, the Electrical Distribution Vital System, consisting of 4 (four) generators type 'UPS', starts operation, immediately and it will continue supplying power to the reactor control table, core cooling system and other security systems. To contribute to security, in the electric power failure, starts to operate the Emergency Cooling System (SRE). SRE has the function of removing residual heat from the core to prevent the melting of fuel elements in the event of loss of refrigerant to the core. Adding to the generators with batteries group system, new auxiliary

A Modular Telerobot Control System for Accident Response

International Nuclear Information System (INIS)

Anderson, Robert J.; Shirey, David L.

1999-01-01

The Accident Response Mobile Manipulator System (ARMMS) is a teleoperated emergency response vehicle that deploys two hydraulic manipulators, five cameras, and an array of sensors to the scene of an incident. It is operated from a remote base station that can be situated up to four kilometers away from the site. Recently, a modular telerobot control architecture called SMART (Sandia's Modular Architecture for Robotic and Teleoperation) was applied to ARMMS to improve the precision, safety, and operability of the manipulators on board. Using SMART, a prototype manipulator control system was developed in a couple of days, and an integrated working system was demonstrated within a couple of months. New capabilities such as camera teleoperation, autonomous tool changeout and dual manipulator control have been incorporated. The final system incorporates twenty-two separate modules and implements eight different behavior modes. This paper describes the integration of SMART into the ARMMS system

Radioactive material (RAM) accident/incident data analysis program

International Nuclear Information System (INIS)

Emerson, E.L.; McClure, J.D.

1985-03-01

This report describes the development of the Radioactive Material Transportation Accident/Incident Data Base (RAM-AIDB), which contains information on the occurrences of transportation accidents and incidents, for radioactive materials (RAM) that are involved in the process of transportation, loading and unloading operation, or temporary storage. These transportation operations are in support of the nuclear fuel cycle for electrical energy generation. This study analyzes in some detail basic accident/incident statistical data, RAM packaging accident response data, and the health effects associated with RAM transport accidents/incidents. This report presents a summary of US RAM transport accident/incident experience for the period 1971 through December 1981. In addition, a sample annual summary of accident/incident experience is presented for the calendar year 1981

48 CFR 836.513 - Accident prevention.

Science.gov (United States)

2010-10-01

... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 836.513 Accident... solicitations and contracts for construction that contain the clause at FAR 52.236-13, Accident Prevention. ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Accident prevention. 836...

48 CFR 36.513 - Accident prevention.

Science.gov (United States)

2010-10-01

... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 36.513 Accident prevention. (a) The contracting officer shall insert the clause at 52.236-13, Accident Prevention, in... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Accident prevention. 36...

[Occupational accidents in an oil refinery in Brazil].

Science.gov (United States)

Souza, Carlos Augusto Vaz de; Freitas, Carlos Machado de

2002-10-01

Work in oil refineries involves the risk of minor to major accidents. National data show the impact of accidents on this industry. A study was carried out to describe accident profile and evaluate the adequacy of accident reporting system. Data on all accidents reported in an oil refinery in the state of Rio de Janeiro for the year 1997 were organized and analyzed. The study population consisted of 153 injury cases, 83 hired and 69 contracted workers. The variables were: type of accident, operation mode and position of the worker injured. Among hired workers, minor accidents predominated (54.2%) and they occurred during regular operation activities (62.9%). Among contracted workers, there also predominated minor accidents (75.5%) in a higher percentage, but they occurred mainly during maintenance activities (96.8%). The study results showed that there is a predominance of accidents in lower hierarchy workers, and these accidents occur mainly during maintenance activities. There is a need to improve the company's accident reporting system and accident investigation procedures.

A systemic analysis of South Korea Sewol ferry accident - Striking a balance between learning and accountability.

Science.gov (United States)

Kee, Dohyung; Jun, Gyuchan Thomas; Waterson, Patrick; Haslam, Roger

2017-03-01

The South Korea Sewol ferry accident in April 2014 claimed the lives of over 300 passengers and led to criminal charges of 399 personnel concerned including imprisonment of 154 of them as of Oct 2014. Blame and punishment culture can be prevalent in a more hierarchical society like South Korea as shown in the aftermath of this disaster. This study aims to analyse the South Korea ferry accident using Rasmussen's risk management framework and the associated AcciMap technique and to propose recommendations drawn from an AcciMap-based focus group with systems safety experts. The data for the accident analysis were collected mainly from an interim investigation report by the Board of Audit and Inspection of Korea and major South Korean and foreign newspapers. The analysis showed that the accident was attributed to many contributing factors arising from front-line operators, management, regulators and government. It also showed how the multiple factors including economic, social and political pressures and individual workload contributed to the accident and how they affected each other. This AcciMap was presented to 27 safety researchers and experts at 'the legacy of Jens Rasmussen' symposium adjunct to ODAM2014. Their recommendations were captured through a focus group. The four main recommendations include forgive (no blame and punishment on individuals), analyse (socio-technical system-based), learn (from why things do not go wrong) and change (bottom-up safety culture and safety system management). The findings offer important insights into how this type of accident should be understood, analysed and the subsequent response. Copyright © 2016 Elsevier Ltd. All rights reserved.

Swedish approach to information needs in severe accident situations

Energy Technology Data Exchange (ETDEWEB)

Soederman, E. (ES-Konsult AB, Stockholm (Sweden)); Karnik, P. (ES-Konsult AB, Stockholm (Sweden))

1992-07-01

In Sweden, systems for mitigating severe accidents have been installed at all plants and procedures have been implemented for accident management. This work has included the assessment of needs of information and the survivability of existing instrumentation during the various phases of an accident scenario. The approach has been pragmatic and based on existing knowledge of accident phenomenology and MAAP code calculations together with plant staff experience of detailed plant design and installation. During the early phases of accidents, which is defined to remain up to maximum fuel temperatures in the order of 800 C, the ordinary instrumentation is to a great extent useful. The reactor vessel level measurement is however identified to be weak in BWRs as soon as the core is partly uncovered. This has lead to the development of a Core Cooling Monitor. In later phases of accident scenarios, the general basis has been that no intrumentation inside the containment can survive. It has been analysed what information is strictly needed. It has been found that detailed information of the status inside the pressure vessel is of little importance after vessel penetration. Certain important information needs have been identified, that was not safely accessible from existing instrumentation. This had lead to complementary installations, using instruments inserted into the containment through protected guide tubes. Also for sampling of gas and water complementary installations have been made. (orig.)

Swedish approach to information needs in severe accident situations

International Nuclear Information System (INIS)

Soederman, E.; Karnik, P.

1992-01-01

In Sweden, systems for mitigating severe accidents have been installed at all plants and procedures have been implemented for accident management. This work has included the assessment of needs of information and the survivability of existing instrumentation during the various phases of an accident scenario. The approach has been pragmatic and based on existing knowledge of accident phenomenology and MAAP code calculations together with plant staff experience of detailed plant design and installation. During the early phases of accidents, which is defined to remain up to maximum fuel temperatures in the order of 800 C, the ordinary instrumentation is to a great extent useful. The reactor vessel level measurement is however identified to be weak in BWRs as soon as the core is partly uncovered. This has lead to the development of a Core Cooling Monitor. In later phases of accident scenarios, the general basis has been that no intrumentation inside the containment can survive. It has been analysed what information is strictly needed. It has been found that detailed information of the status inside the pressure vessel is of little importance after vessel penetration. Certain important information needs have been identified, that was not safely accessible from existing instrumentation. This had lead to complementary installations, using instruments inserted into the containment through protected guide tubes. Also for sampling of gas and water complementary installations have been made. (orig.)

Key Characteristics of Combined Accident including TLOFW accident for PSA Modeling

Energy Technology Data Exchange (ETDEWEB)

Kim, Bo Gyung; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of); Yoon, Ho Joon [Khalifa University of Science, Technology and Research, Abu Dhabi (United Arab Emirates)

2015-05-15

The conventional PSA techniques cannot adequately evaluate all events. The conventional PSA models usually focus on single internal events such as DBAs, the external hazards such as fire, seismic. However, the Fukushima accident of Japan in 2011 reveals that very rare event is necessary to be considered in the PSA model to prevent the radioactive release to environment caused by poor treatment based on lack of the information, and to improve the emergency operation procedure. Especially, the results from PSA can be used to decision making for regulators. Moreover, designers can consider the weakness of plant safety based on the quantified results and understand accident sequence based on human actions and system availability. This study is for PSA modeling of combined accidents including total loss of feedwater (TLOFW) accident. The TLOFW accident is a representative accident involving the failure of cooling through secondary side. If the amount of heat transfer is not enough due to the failure of secondary side, the heat will be accumulated to the primary side by continuous core decay heat. Transients with loss of feedwater include total loss of feedwater accident, loss of condenser vacuum accident, and closure of all MSIVs. When residual heat removal by the secondary side is terminated, the safety injection into the RCS with direct primary depressurization would provide alternative heat removal. This operation is called feed and bleed (F and B) operation. Combined accidents including TLOFW accident are very rare event and partially considered in conventional PSA model. Since the necessity of F and B operation is related to plant conditions, the PSA modeling for combined accidents including TLOFW accident is necessary to identify the design and operational vulnerabilities.The PSA is significant to assess the risk of NPPs, and to identify the design and operational vulnerabilities. Even though the combined accident is very rare event, the consequence of combined

Severe accident management. Optimized guidelines and strategies

International Nuclear Information System (INIS)

Braun, Matthias; Löffler, Micha; Plank, Hermann; Asse, Dietmar; Dimmelmeier, Harald

2014-01-01

The highest priority for mitigating the consequences of a severe accident with core melt lies in securing containment integrity, as this represents the last barrier against fission product release to the environment. Containment integrity is endangered by several physical phenomena, especially highly transient phenomena following high-pressure reactor pressure vessel failure (like direct containment heating or steam explosions which can lead to early containment failure), hydrogen combustion, quasi-static over-pressure, temperature failure of penetrations, and basemat penetration by core melt. Each of these challenges can be counteracted by dedicated severe accident mitigation hardware, like dedicated primary circuit depressurization valves, hydrogen recombiners or igniters, filtered containment venting, containment cooling systems, and core melt stabilization systems (if available). However, besides their main safety function these systems often have also secondary effects that need to be considered. Filtered containment venting causes (though limited) fission product release into the environment, primary circuit depressurization leads to loss of coolant, and an ex-vessel core melt stabilization system as well as hydrogen igniters can generate high pressure and temperature loads on the containment. To ensure that during a severe accident any available systems are used to their full beneficial extent while minimizing their potential negative impact, AREVA has implemented a severe accident management for German nuclear power plants. This concept makes use of extensive numerical simulations of the entire plant, quantifying the impact of system activations (operational systems, safety systems, as well as dedicated severe accident systems) on the accident progression for various scenarios. Based on the knowledge gained, a handbook has been developed, allowing the plant operators to understand the current state of the plant (supported by computational aids), to predict

Analysis of Waste Leak and Toxic Chemical Release Accidents from Waste Feed Delivery (WFD) Diluent System

Energy Technology Data Exchange (ETDEWEB)

WILLIAMS, J.C.

2000-09-15

Radiological and toxicological consequences are calculated for 4 postulated accidents involving the Waste Feed Delivery (WFD) diluent addition systems. Consequences for the onsite and offsite receptor are calculated. This analysis contains technical information used to determine the accident consequences for the River Protection Project (RPP) Final Safety Analysis Report (FSAR).

Analysis of Waste Leak and Toxic Chemical Release Accidents from Waste Feed Delivery (WFD) Diluent System

International Nuclear Information System (INIS)

WILLIAMS, J.C.

2000-01-01

Radiological and toxicological consequences are calculated for 4 postulated accidents involving the Waste Feed Delivery (WFD) diluent addition systems. Consequences for the onsite and offsite receptor are calculated. This analysis contains technical information used to determine the accident consequences for the River Protection Project (RPP) Final Safety Analysis Report (FSAR)

Expert software for accident identification

International Nuclear Information System (INIS)

Dobnikar, M.; Nemec, T.; Muehleisen, A.

2003-01-01

Each type of an accident in a Nuclear Power Plant (NPP) causes immediately after the start of the accident variations of physical parameters that are typical for that type of the accident thus enabling its identification. Examples of these parameter are: decrease of reactor coolant system pressure, increase of radiation level in the containment, increase of pressure in the containment. An expert software enabling a fast preliminary identification of the type of the accident in Krsko NPP has been developed. As input data selected typical parameters from Emergency Response Data System (ERDS) of the Krsko NPP are used. Based on these parameters the expert software identifies the type of the accident and also provides the user with appropriate references (past analyses and other documentation of such an accident). The expert software is to be used as a support tool by an expert team that forms in case of an emergency at Slovenian Nuclear Safety Administration (SNSA) with the task to determine the cause of the accident, its most probable scenario and the source term. The expert software should provide initial identification of the event, while the final one is still to be made after appropriate assessment of the event by the expert group considering possibility of non-typical events, multiple causes, initial conditions, influences of operators' actions etc. The expert software can be also used as an educational/training tool and even as a simple database of available accident analyses. (author)

Time-to-collision analysis of pedestrian and pedal-cycle accidents for the development of autonomous emergency braking systems.

Science.gov (United States)

Lenard, James; Welsh, Ruth; Danton, Russell

2018-06-01

The aim of this study was to describe the position of pedestrians and pedal cyclists relative to the striking vehicle in the 3 s before impact. This information is essential for the development of effective autonomous emergency braking systems and relevant test conditions for consumer ratings. The UK RAIDS-OTS study provided 175 pedestrian and 127 pedal-cycle cases based on in-depth, at-scene investigations of a representative sample of accidents in 2000-2010. Pedal cyclists were scattered laterally more widely than pedestrians (90% of cyclists within around ±80° compared to ±20° for pedestrians), however their distance from the striking vehicle in the seconds before impact was no greater (90% of cyclists within 42 m at 3 s compared to 50 m for pedestrians). This data is consistent with a greater involvement of slow moving vehicles in cycle accidents. The implication of the results is that AEB systems for cyclists require almost complete 180° side-to-side vision but do not need a longer distance range than for pedestrians. Copyright © 2018 Elsevier Ltd. All rights reserved.

Accident management for severe accidents

International Nuclear Information System (INIS)

Bari, R.A.; Pratt, W.T.; Lehner, J.; Leonard, M.; Disalvo, R.; Sheron, B.

1988-01-01

The management of severe accidents in light water reactors is receiving much attention in several countries. The reduction of risk by measures and/or actions that would affect the behavior of a severe accident is discussed. The research program that is being conducted by the US Nuclear Regulatory Commission focuses on both in-vessel accident management and containment and release accident management. The key issues and approaches taken in this program are summarized. 6 refs

Remotely Piloted Aircraft Systems and a Wireless Sensors Network for Radiological Accidents

Directory of Open Access Journals (Sweden)

A. Reyes-Muñoz

2016-01-01

Full Text Available In critical radiological situations, the real time information that we could get from the disaster area becomes of great importance. However, communication systems could be affected after a radiological accident. The proposed network in this research consists of distributed sensors in charge of collecting radiological data and ground vehicles that are sent to the nuclear plant at the moment of the accident to sense environmental and radiological information. Afterwards, data would be analyzed in the control center. Collected data by sensors and ground vehicles would be delivered to a control center using Remotely Piloted Aircraft Systems (RPAS as a message carrier. We analyze the pairwise contacts, as well as visiting times, data collection, capacity of the links, size of the transmission window of the sensors, and so forth. All this calculus was made analytically and compared via network simulations.

48 CFR 636.513 - Accident prevention.

Science.gov (United States)

2010-10-01

... CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 636.513 Accident prevention. (a) In... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Accident prevention. 636... contracting activities shall insert DOSAR 652.236-70, Accident Prevention, in lieu of FAR clause 52.236-13...

Judicial autopsy of radiation accidents

International Nuclear Information System (INIS)

Kannan, P.M.

1990-01-01

This paper discusses issues regarding the judicial autopsy of radiation accidents. In the litigation which follows a radiation accident, a claimant calls on the legal system to adjudicate a dispute. Scientific questions are thrust upon the court. The legal system (through attorneys for the parties) then invites scientists to assist the court in resolving such questions. The invitation, however, does not allow the scientist to bring along his full kit. Experimentation, such as repeating the accident with dosimeters to gather more accurate data, is generally not allowed. Also, the scientist must give up his practice of choosing which questions he will pursue

Development of severe accident management advisory and training simulator (SAMAT)

International Nuclear Information System (INIS)

Jeong, K.-S.; Kim, K.-R.; Jung, W.-D.; Ha, J.-J.

2002-01-01

The most operator support systems including the training simulator have been developed to assist the operator and they cover from normal operation to emergency operation. For the severe accident, the overall architecture for severe accident management is being developed in some developed countries according to the development of severe accident management guidelines which are the skeleton of severe accident management architecture. In Korea, the severe accident management guideline for KSNP was recently developed and it is expected to be a central axis of logical flow for severe accident management. There are a lot of uncertainties in the severe accident phenomena and scenarios and one of the major issues for developing a operator support system for a severe accident is the reduction of these uncertainties. In this paper, the severe accident management advisory system with training simulator, SAMAT, is developed as all available information for a severe accident are re-organized and provided to the management staff in order to reduce the uncertainties. The developed system includes the graphical display for plant and equipment status, the previous research results by knowledge-base technique, and the expected plant behavior using the severe accident training simulator. The plant model used in this paper is oriented to severe accident phenomena and thus can simulate the plant behavior for a severe accident. Therefore, the developed system may make a central role of the information source for decision-making for a severe accident management, and will be used as the training simulator for severe accident management

Public opinion on atomic energy after JCO accident

International Nuclear Information System (INIS)

Okamoto, Koichi; Miyamoto, Sosuke; Ishikawa, Masayori; Shimomura, Hideo; Hori, Hiromoto; Suzuki, Yasuko; Kamise, Yumiko

2004-04-01

JCO accident happened on September 30, 1999. This book deals with the public opinion of atomic energy after JCO accident in Japan and comparison with that of USA and France. The analysis of public opinion structure is also shown. The important chapter is the eighth chapter a n opinion survey after the accident , of which sampling areas consisted of three areas such as JCO accident area, the nuclear power plants and the general cities. The analytical results of data showed that the public opinion in Tokai-mura and Naka-machi, the JCO accident area, indicated moderate opinions. It is the interesting results were obtained that the moderate tendency of opinion was in order JCO accident area, the nuclear power plants and the general cities. People's attitude toward nuclear energy related to their social values. Abstract of JCO accident, JCO structure, the effects of accident on the environment and news stories about the accident are reported. (S.Y.)

Hydrogen-control systems for severe LWR accident conditions - a state-of-technology report

International Nuclear Information System (INIS)

Hilliard, R.K.; Postma, A.K.; Jeppson, D.W.

1983-03-01

This report reviews the current state of technology regarding hydrogen safety issues in light water reactor plants. Topics considered in this report relate to control systems and include combustion prevention, controlled combustion, minimization of combustion effects, combination of control concepts, and post-accident disposal. A companion report addresses hydrogen generation, distribution, and combustion. The objectives of the study were to identify the key safety issues related to hydrogen produced under severe accident conditions, to describe the state of technology for each issue, and to point out ongoing programs aimed at resolving the open issues

A Novel Thermal-Mechanical Detection System for Reactor Pressure Vessel Bottom Failure Monitoring in Severe Accidents

International Nuclear Information System (INIS)

Bi, Daowei; Bu, Jiangtao; Xu, Dongling

2013-06-01

Following the Fukushima Daiichi nuclear accident in Japan, there is an increased need of enhanced capabilities for severe accident management (SAM) program. Among others, a reliable method for detecting reactor pressure vessel (RPV) bottom failure has been evaluated as imperative by many utility owners. Though radiation and/or temperature measurement are potential solutions by tradition, there are some limitations for them to function desirably in such severe accident as that in Japan. To provide reliable information for assessment of accident progress in SAM program, in this paper we propose a novel thermal-mechanical detection system (TMDS) for RPV bottom failure monitoring in severe accidents. The main components of TMDS include thermally sensitive element, metallic cables, tension controlled switch and main control room annunciation device. With TMDS installed, there shall be a reliable means of keeping SAM decision-makers informed whether the RPV bottom has indeed failed. Such assurance definitely guarantees enhancement of severe accident management performance and significantly improve nuclear safety and thus protect the society and people. (authors)

[Analysis of accidents for magnetically induced displacement of the large ferromagnetic material in magnetic resonance systems].

Science.gov (United States)

Yamatani, Yuya; Doi, Tsukasa; Ueyama, Tsuyoshi; Nishiki, Shigeo; Ogura, Akio; Kawamitsu, Hideaki; Tsuchihashi, Toshio; Okuaki, Tomoyuki; Matsuda, Tsuyoshi

2013-01-01

To improve magnetic resonance (MR) safety, we surveyed the accidents caused by large ferromagnetic materials brought into MR systems accidentally. We sent a questionnaire to 700 Japanese medical institutions and received 405 valid responses (58%). A total of 97 accidents in 77 institutions were observed and we analyzed them regarding incidental rate, the detail situation and environmental factors. The mean accident rate of each institute was 0.7/100,000 examinations, which was widely distributed (0-25.6/100,000) depending on the institute. In this survey, relatively small institutes with less than 500 beds tend to have these accidents more frequently (paccidents than those with less than 10 daily examinations. The institutes with 6-10 MR examinations daily have significantly more accidents than that with more than 10 daily MR examinations (paccidents were considered to be "prejudice" and "carelessness" but some advocate "ignorance." Though we could not find significant reduction in the institutes that have lectures and training for MR safety, we should continue lectures and training for MR safety to reduce accidents due to "ignorance."

The Role of Trust and Interaction in Global Positioning System Related Accidents

Science.gov (United States)

Johnson, Chris W.; Shea, Christine; Holloway, C. Michael

2008-01-01

The Global Positioning System (GPS) uses a network of satellites to calculate the position of a receiver over time. This technology has revolutionized a wide range of safety-critical industries and leisure applications. These systems provide diverse benefits; supplementing the users existing navigation skills and reducing the uncertainty that often characterizes many route planning tasks. GPS applications can also help to reduce workload by automating tasks that would otherwise require finite cognitive and perceptual resources. However, the operation of these systems has been identified as a contributory factor in a range of recent accidents. Users often come to rely on GPS applications and, therefore, fail to notice when they develop faults or when errors occur in the other systems that use the data from these systems. Further accidents can stem from the over confidence that arises when users assume automated warnings will be issued when they stray from an intended route. Unless greater attention is paid to the role of trust and interaction in GPS applications then there is a danger that we will see an increasing number of these failures as positioning technologies become integral in the functioning of increasing numbers of applications.

MELCOR Accident Consequence Code System (MACCS)

International Nuclear Information System (INIS)

Chanin, D.I.; Sprung, J.L.; Ritchie, L.T.; Jow, Hong-Nian

1990-02-01

This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previous CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. This document, Volume 1, the Users's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems

MELCOR Accident Consequence Code System (MACCS)

Energy Technology Data Exchange (ETDEWEB)

Chanin, D.I. (Technadyne Engineering Consultants, Inc., Albuquerque, NM (USA)); Sprung, J.L.; Ritchie, L.T.; Jow, Hong-Nian (Sandia National Labs., Albuquerque, NM (USA))

1990-02-01

This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previous CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. This document, Volume 1, the Users's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems.

Traffic accidents on expressways: new threat to China.

Science.gov (United States)

Zhao, Jinbao; Deng, Wei

2012-01-01

As China is building one of the largest expressway systems in the world, expressway safety problems have become serious concerns to China. This article analyzed the trends in expressway accidents in China from 1995 to 2010 and examined the characteristics of these accidents. Expressway accident data were obtained from the Annual Report for Road Traffic Accidents published by the Ministry of Public Security of China. Expressway mileage data were obtained from the National Statistics Yearbook published by the National Bureau of Statistics of China. Descriptive statistical analyses were conducted based on these data. Expressway deaths increased by 10.2-fold from 616 persons in 1995 to 6300 persons in 2010, and the average annual increase was 17.9 percent over the past 15 years, and the overall other road traffic deaths was -0.33 percent. China's expressway mileage accounted for only 1.85 percent of highway mileage driven in 2010, but expressway deaths made up 13.54 percent of highway traffic deaths. The average annual accident lethality rate [accident deaths/(accident deaths + accident injuries)] for China's expressways was 27.76 percent during the period 1995 to 2010, which was 1.33 times higher than the accident lethality rate of highway traffic accidents. China's government should pay attention to expressway construction and safety interventions during the rapid development period of expressways. Related causes, such as geographic patterns, speeding, weather conditions, and traffic flow composition, need to be studied in the near future. An effective and scientific expressway safety management services system, composed of a speed monitoring system, warning system, and emergency rescue system, should be established in developed and underdeveloped provinces in China to improve safety on expressway.

Statistical evaluation of design-error related accidents

International Nuclear Information System (INIS)

Ott, K.O.; Marchaterre, J.F.

1980-01-01

In a recently published paper (Campbell and Ott, 1979), a general methodology was proposed for the statistical evaluation of design-error related accidents. The evaluation aims at an estimate of the combined residual frequency of yet unknown types of accidents lurking in a certain technological system. Here, the original methodology is extended, as to apply to a variety of systems that evolves during the development of large-scale technologies. A special categorization of incidents and accidents is introduced to define the events that should be jointly analyzed. The resulting formalism is applied to the development of the nuclear power reactor technology, considering serious accidents that involve in the accident-progression a particular design inadequacy

Accident precursors, near misses, and warning signs: Critical review and formal definitions within the framework of Discrete Event Systems

International Nuclear Information System (INIS)

Saleh, Joseph H.; Saltmarsh, Elizabeth A.; Favarò, Francesca M.; Brevault, Loïc

2013-01-01

An important consideration in safety analysis and accident prevention is the identification of and response to accident precursors. These off-nominal events are opportunities to recognize potential accident pathogens, identify overlooked accident sequences, and make technical and organizational decisions to address them before further escalation can occur. When handled properly, the identification of precursors provides an opportunity to interrupt an accident sequence from unfolding; when ignored or missed, precursors may only provide tragic proof after the fact that an accident was preventable. In this work, we first provide a critical review of the concept of precursor, and we highlight important features that ought to be distinguished whenever accident precursors are discussed. We address for example the notion of ex-ante and ex-post precursors, identified for postulated and instantiated (occurred) accident sequences respectively, and we discuss the feature of transferability of precursors. We then develop a formal (mathematical) definition of accident precursors as truncated accident sequences within the modeling framework of Discrete Event Systems. Additionally, we examine the related notions of “accident pathogens” as static or lurking adverse conditions that can contribute to or aggravate an accident, as well as “near misses”, “warning signs” and the novel concept of “accident pathway”. While these terms are within the same linguistic neighborhood as “accident precursors”, we argue that there are subtle but important differences between them and recommend that they not be used interchangeably for the sake of accuracy and clarity of communication within the risk and safety community. We also propose venues for developing quantitative importance measures for accident precursors, similar to component importance measures in reliability engineering. Our objective is to establish a common understanding and clear delineation of these terms, and

Accident history, risk perception and traffic safe behaviour.

Science.gov (United States)

Ngueutsa, Robert; Kouabenan, Dongo Rémi

2017-09-01

This study clarifies the associations between accident history, perception of the riskiness of road travel and traffic safety behaviours by taking into account the number and severity of accidents experienced. A sample of 525 road users in Cameroon answered a questionnaire comprising items on perception of risk, safe behaviour and personal accident history. Participants who reported involvement in more than three accidents or involvement in a severe accident perceived road travel as less risky and also reported behaving less safely compared with those involved in fewer, or less severe accidents. The results have practical implications for the prevention of traffic accidents. Practitioner Summary: The associations between accident history, perceived risk of road travel and safe behaviour were investigated using self-report questionnaire data. Participants involved in more than three accidents, or in severe accidents, perceived road travel as less risky and also reported more unsafe behaviour compared with those involved in fewer, or less severe accidents. Campaigns targeting people with a less serious, less extensive accident history should aim to increase awareness of hazards and the potential severity of their consequences, as well as emphasising how easy it is to take the recommended preventive actions. Campaigns targeting those involved in more frequent accidents, and survivors of serious accidents, should address feelings of invulnerability and helplessness.

Assessment of chemical processes for the post-accident decontamination of reactor-coolant systems. Final report

International Nuclear Information System (INIS)

Munson, L.F.; Card, C.J.; Divine, J.R.

1983-02-01

Previously used chemical decontamination processes and potentially useful new decontamination processes were examined for the usefulness following a reactor accident. Both generic fuel damage accidents and the accident at TMI-2 were considered. A total of fourteen processes were evaluated. Process evaluation included data in the following categories: technical description of the process, recorded past usage, effectiveness, process limitation, safety consideration, and waste management. These data were evaluated, and cost considerations were presented along with a description of the applicability of the process to TMI-2 and development and demonstration needs. Specific recommendations regarding a primary-system decontamination development program to support TMI-2 recovery were also presented

Loss-of-coolant and loss-of-flow accident in the ITER-EDA first wall/blanket cooling system

Energy Technology Data Exchange (ETDEWEB)

Komen, E.M.J.; Koning, H.

1995-05-01

This report presents the analysis of the transient thermal-hydraulic system behaviour inside the first wall/blanket cooling system and the resulting temperature response inside the first wall and blanket of the ITER-EDA (International Thermonuclear Experimental Reactor - Engineering Design Activities) reactor design during a: - Loss-of-coolant accident caused by a reputure of the pump suction pipe; - loss-of-flow accident caused by a trip of the recirculation pump. (orig.).

Loss-of-coolant and loss-of-flow accident in the ITER-EDA first wall/blanket cooling system

International Nuclear Information System (INIS)

Komen, E.M.J.; Koning, H.

1995-05-01

This report presents the analysis of the transient thermal-hydraulic system behaviour inside the first wall/blanket cooling system and the resulting temperature response inside the first wall and blanket of the ITER-EDA (International Thermonuclear Experimental Reactor - Engineering Design Activities) reactor design during a: - Loss-of-coolant accident caused by a reputure of the pump suction pipe; - loss-of-flow accident caused by a trip of the recirculation pump. (orig.)

Validation and application of the system code ATHLET-CD for BWR severe accident analyses

Energy Technology Data Exchange (ETDEWEB)

Di Marcello, Valentino, E-mail: valentino.marcello@kit.edu; Imke, Uwe; Sanchez, Victor

2016-10-15

Highlights: • We present the application of the system code ATHLET-CD code for BWR safety analyses. • Validation of core in-vessel models is performed based on KIT CORA experiments. • A SB-LOCA scenario is simulated on a generic German BWR plant up to vessel failure. • Different core reflooding possibilities are investigated to mitigate the accident consequences. • ATHLET-CD modelling features reflect the current state of the art of severe accident codes. - Abstract: This paper is aimed at the validation and application of the system code ATHLET-CD for the simulation of severe accident phenomena in Boiling Water Reactors (BWR). The corresponding models for core degradation behaviour e.g., oxidation, melting and relocation of core structural components are validated against experimental data available from the CORA-16 and -17 bundle tests. Model weaknesses are discussed along with needs for further code improvements. With the validated ATHLET-CD code, calculations are performed to assess the code capabilities for the prediction of in-vessel late phase core behaviour and reflooding of damaged fuel rods. For this purpose, a small break LOCA scenario for a generic German BWR with postulated multiple failures of the safety systems was selected. In the analysis, accident management measures represented by cold water injection into the damaged reactor core are addressed to investigate the efficacy in avoiding or delaying the failure of the reactor pressure vessel. Results show that ATHLET-CD is applicable to the description of BWR plant behaviour with reliable physical models and numerical methods adopted for the description of key in-vessel phenomena.

Comparison of accident risks in different energy systems: Comments from Russian specialists

International Nuclear Information System (INIS)

2000-01-01

Many articles on accident risk analysis of different energy systems in comparison with nuclear power share certain stereotypical features. For example: When assessing the risks associated with the operation of such facilities, they ignore the effects of the upgrading of RBMK reactors which was carried out after the Chernobyl accident. In their integrated assessment of the radiological consequences of the Chernobyl accident they use numerous studies which frequently contain unreliable source data and unfounded predictions, and they ignore many socio-political factors which considerably increased the damage caused by the accident. Unfortunately, the study in question, despite its topicality and originality of approach, is also not without such shortcomings. After the Chernobyl accident, reconstruction and safety enhancement measures were implemented at nuclear power plants with RBMK reactors which were without precedent in world practice and have continued to this day. According to probabilistic safety assessments (PSA) carried out with the assistance of international experts, the probability of serious accidents at RBMKs has decreased by a factor of two or more thanks to the above mentioned measures. The mean weighted safety index for all operational RBMK reactors is 10 -4 l/year and is decreasing thanks to the ongoing and planned reconstruction of all units. All operational nuclear power plants with RBMK reactors are thus on a par with the successfully operating Soviet WWERs and western boiling water reactors (BWRs) and pressurized water reactors (PWRs), and satisfy the IAEA recommendations regarding the risk level of older generation nuclear power plants. The authors of the IAEA Bulletin article give estimates of the remote radiological consequences of the Chernobyl accident which range from an estimated 10,000 to 30,000 fatal cases of radiation-induced cancer, and the literature on the subject contains even more extreme estimates. However, our 14 years

Visual and intelligent transients and accidents analyzer based on thermal-hydraulic system code

International Nuclear Information System (INIS)

Meng Lin; Rui Hu; Yun Su; Ronghua Zhang; Yanhua Yang

2005-01-01

Full text of publication follows: Many thermal-hydraulic system codes were developed in the past twenty years, such as RELAP5, RETRAN, ATHLET, etc. Because of their general and advanced features in thermal-hydraulic computation, they are widely used in the world to analyze transients and accidents. But there are following disadvantages for most of these original thermal-hydraulic system codes. Firstly, because models are built through input decks, so the input files are complex and non-figurative, and the style of input decks is various for different users and models. Secondly, results are shown in off-line data file form. It is not convenient for analysts who may pay more attention to dynamic parameters trend and changing. Thirdly, there are few interfaces with other program in these original thermal-hydraulic system codes. This restricts the codes expanding. The subject of this paper is to develop a powerful analyzer based on these thermal-hydraulic system codes to analyze transients and accidents more simply, accurately and fleetly. Firstly, modeling is visual and intelligent. Users build the thermalhydraulic system model using component objects according to their needs, and it is not necessary for them to face bald input decks. The style of input decks created automatically by the analyzer is unified and can be accepted easily by other people. Secondly, parameters concerned by analyst can be dynamically communicated to show or even change. Thirdly, the analyzer provide interface with other programs for the thermal-hydraulic system code. Thus parallel computation between thermal-hydraulic system code and other programs become possible. In conclusion, through visual and intelligent method, the analyzer based on general and advanced thermal-hydraulic system codes can be used to analysis transients and accidents more effectively. The main purpose of this paper is to present developmental activities, assessment and application results of the visual and intelligent

Radiation protection service for a nucleonic control system of continuous casting plant after events of accident

International Nuclear Information System (INIS)

Chakrabarti, Santanu; Massand, O.P.

1998-01-01

Extensive use of nucleonic control systems like level controllers was observed during radiation protection surveys in industries such as refineries, steel plants etc., located in the eastern region of India. There were two accidents at continuous casting plant in 1995 which affected the nucleonic control system installed in 1992. The authorities contacted Bhabha Atomic Research Centre (BARC) for radiation protection surveys for the involved nucleonic gauges. The present paper describes the radiation protection services rendered by BARC during such accidents. (author)

A systemic analysis of patterns of organizational breakdowns in accidents: A case from Helicopter Emergency Medical Service (HEMS) operations

International Nuclear Information System (INIS)

Kontogiannis, Tom; Malakis, Stathis

2012-01-01

In recent years, many accident models and techniques have shifted their focus from shortfalls in the actions of practitioners to systemic causes in the organization. Accident investigation techniques (e.g., STAMP) have been developed that looked into the flaws of control processes in the organization. Organizational models have looked into general patterns of breakdown related to structural vulnerabilities and gradual degradation of performance. Although some degree of cross-fertilization has been developed between these two trends, safety analysts are left on their own to integrate this gap between control flaws and patterns of organizational breakdown in accident investigation. This article attempts to elaborate the control dynamics of the Systems Theoretic Accident Model and Process (STAMP) technique on the basis of a theoretical model of organizational viability (i.e., the Viable Systems Model). The joint STAMP–VSM framework is applied to an accident from a Helicopter Emergency Medical Service (HEMS) organization to help analysts progress from the analysis of control flaws to the underlying patterns of breakdown. The joint framework may help analysts to rethink the safety organization, model new information loops and constraints, look at the adaptation and steering functions of the organization and finally, develop high leverage interventions. - Highlights: ► This article bridges the gap between two parallel trends in systemic accident models. ► Investigation techniques (i.e., STAMP) have looked into the flaws of safety management processes. ► The literature has highlighted many patterns (or archetypes) of organizational breakdowns. ► The Viable System Model is used with STAMP to link control flaws and organizational breakdowns.

Evaluation of severe accident environmental conditions taking accident management strategy into account for equipment survivability assessments

International Nuclear Information System (INIS)

Lee, Byung Chul; Jeong, Ji Hwan; Na, Man Gyun; Kim, Soong Pyung

2003-01-01

This paper presents a methodology utilizing accident management strategy in order to determine accident environmental conditions in equipment survivability assessments. In case that there is well-established accident management strategy for specific nuclear power plant, an application of this tool can provide a technical rationale on equipment survivability assessment so that plant-specific and time-dependent accident environmental conditions could be practically and realistically defined in accordance with the equipment and instrumentation required for accident management strategy or action appropriately taken. For this work, three different tools are introduced; Probabilistic Safety Assessment (PSA) outcomes, major accident management strategy actions, and Accident Environmental Stages (AESs). In order to quantitatively investigate an applicability of accident management strategy to equipment survivability, the accident simulation for a most likely scenario in Korean Standard Nuclear Power Plants (KSNPs) is performed with MAAP4 code. The Accident Management Guidance (AMG) actions such as the Reactor Control System (RCS) depressurization, water injection into the RCS, the containment pressure and temperature control, and hydrogen concentration control in containment are applied. The effects of these AMG actions on the accident environmental conditions are investigated by comparing with those from previous normal accident simulation, especially focused on equipment survivability assessment. As a result, the AMG-involved case shows the higher accident consequences along the accident environmental stages

Analysis of three loss-of-flow accidents in the first wall cooling system of NET/ITER

International Nuclear Information System (INIS)

Komen, E.M.J.; Koning, H.

1993-05-01

This report presents the thermal-hydraulic analysis of three Loss-of-Flow Accidents (LOFAs) in the first wall cooling system of the Next European Torus (NET) design or the International Thermonuclear Experimental Reactor (ITER) design. The LOFAs considered result from a loss of the forced coolant flow caused by a loss of electrical power for the recirculation pump in the primary circuit. The analyses have been performed using the thermal-hydraulic system analysis code RELAP5/MOD3. In the analyses, special attention has been paid to the transient thermal-hydraulic behaviour of the cooling system and the temperature development in the first wall. In the LOFA case without plasma shutdown, melting starts in the first wall about 150 s after accident initiation. In the LOFA case with delayed plasma shutdown, melting starts in the first wall when the plasma shutdown is initiated later than about 110 s after accident initiation. Melting does not occur in the first wall during a LOFA with prompt plasma scram. (orig.)

Monitoring of Radionuclide Contamination in Food Samples in Malaysia due to Daiichi Reactor Accident in Fukushima, Japan

International Nuclear Information System (INIS)

Nurrul Assyikeen Mohd Jaffary; Abdul Kadir Ishak; Wo, Y.M.

2011-01-01

On March 11, 2011, a serious accident occurred in Daiichi nuclear reactor plant, Fukushima, Japan which caused radioactive materials been released into the atmosphere in the form of aerosols and dust particles. Sea water around the plant was also found contaminated with high radioactivity readings. These radioactive materials could be transported by the winds and ocean current across international borders and cannot be controlled by human. Besides a continuous monitoring activity of radionuclide content in the air and sea water that need to be conducted by the authorities, Malaysia should also control the entry of radionuclide through contaminated food ingestion by human. Radionuclide I-131, Cs-134 and Cs-137 were used as a counter-measure of pollution levels and counted with gamma spectrometry using standard analysis method suggested by AOAC International. In this paper, details description of the role of Radiochemical and Environment Group, Nuclear Malaysia who's responsible in analyzing the radioactivity in the food samples due to Fukushima Daiichi, Japan accident was included. Also discussed are the radioactivity limit adopted and analysis results from this monitoring. (author)

Passive depressurization accident management strategy for boiling water reactors

International Nuclear Information System (INIS)

Liu, Maolong; Erkan, Nejdet; Ishiwatari, Yuki; Okamoto, Koji

2015-01-01

Highlights: • We proposed two passive depressurization systems for BWR severe accident management. • Sensitivity analysis of the passive depressurization systems with different leakage area. • Passive depressurization strategies can prevent direct containment heating. - Abstract: According to the current severe accident management guidance, operators are required to depressurize the reactor coolant system to prevent or mitigate the effects of direct containment heating using the safety/relief valves. During the course of a severe accident, the pressure boundary might fail prematurely, resulting in a rapid depressurization of the reactor cooling system before the startup of SRV operation. In this study, we demonstrated that a passive depressurization system could be used as a severe accident management tool under the severe accident conditions to depressurize the reactor coolant system and to prevent an additional devastating sequence of events and direct containment heating. The sensitivity analysis performed with SAMPSON code also demonstrated that the passive depressurization system with an optimized leakage area and failure condition is more efficient in managing a severe accident

Passive depressurization accident management strategy for boiling water reactors

Energy Technology Data Exchange (ETDEWEB)

Liu, Maolong, E-mail: liuml@vis.t.u-tokyo.ac.jp [Department of Nuclear Engineering and Management, School of Engineering, The University of Tokyo (Japan); Erkan, Nejdet [Nuclear Professional School, School of Engineering, The University of Tokyo (Japan); Ishiwatari, Yuki [Department of Nuclear Engineering and Management, School of Engineering, The University of Tokyo (Japan); Hitachi-GE Nuclear Energy, Ltd. (Japan); Okamoto, Koji [Nuclear Professional School, School of Engineering, The University of Tokyo (Japan)

2015-04-01

Highlights: • We proposed two passive depressurization systems for BWR severe accident management. • Sensitivity analysis of the passive depressurization systems with different leakage area. • Passive depressurization strategies can prevent direct containment heating. - Abstract: According to the current severe accident management guidance, operators are required to depressurize the reactor coolant system to prevent or mitigate the effects of direct containment heating using the safety/relief valves. During the course of a severe accident, the pressure boundary might fail prematurely, resulting in a rapid depressurization of the reactor cooling system before the startup of SRV operation. In this study, we demonstrated that a passive depressurization system could be used as a severe accident management tool under the severe accident conditions to depressurize the reactor coolant system and to prevent an additional devastating sequence of events and direct containment heating. The sensitivity analysis performed with SAMPSON code also demonstrated that the passive depressurization system with an optimized leakage area and failure condition is more efficient in managing a severe accident.

The IAEA Accident Management Programme

Energy Technology Data Exchange (ETDEWEB)

Kabanov, L.; Jankowski, M.; Mauersberger, H. (International Atomic Energy Agency, Vienna (Austria))

1993-02-01

Accident prevention and mitigation programmes and the Emergency Response System (ERS) are important elements of the Agency's activities in the area of nuclear power plant (NPP) safety. Safety Codes and Guides on siting, design, quality assurance and the operation of NPPs have been produced and are used by NPP operating organizations. Nuclear safety evaluation services are provided by the IAEA. The Emergency Response System and the International Nuclear Event Scale (INES) have been developed. The framework for the development of an accident management programme has been set up. The main goal is to develop an Accident Management Manual to provide a systematic, structured approach to the development and implementation of an accident management programme at NPPs. An outline of the Manual has been distributed and the first draft is available. The component parts are: Co-ordinated research programmes (CRPs) on severe accident management and containment behaviour; the use of vulnerability analysis; mitigation of the effects of hydrogen, and generic symptom oriented emergency operating procedures. The IAEA provides guidance by the dissemination of information on methods for accident management; collates information on approaches in this field in different organizations and countries; and arranges exchange of experience and the promulgation of knowledge through the training of NPP managers and senior technical staff. (orig.).

The IAEA Accident Management Programme

International Nuclear Information System (INIS)

Kabanov, L.; Jankowski, M.; Mauersberger, H.

1993-01-01

Accident prevention and mitigation programmes and the Emergency Response System (ERS) are important elements of the Agency's activities in the area of nuclear power plant (NPP) safety. Safety Codes and Guides on siting, design, quality assurance and the operation of NPPs have been produced and are used by NPP operating organizations. Nuclear safety evaluation services are provided by the IAEA. The Emergency Response System and the International Nuclear Event Scale (INES) have been developed. The framework for the development of an accident management programme has been set up. The main goal is to develop an Accident Management Manual to provide a systematic, structured approach to the development and implementation of an accident management programme at NPPs. An outline of the Manual has been distributed and the first draft is available. The component parts are: Co-ordinated research programmes (CRPs) on severe accident management and containment behaviour; the use of vulnerability analysis; mitigation of the effects of hydrogen, and generic symptom oriented emergency operating procedures. The IAEA provides guidance by the dissemination of information on methods for accident management; collates information on approaches in this field in different organizations and countries; and arranges exchange of experience and the promulgation of knowledge through the training of NPP managers and senior technical staff. (orig.)

Developement of integrated evaluation system for severe accident management

Energy Technology Data Exchange (ETDEWEB)

Kim, Dong Ha; Kim, H. D.; Park, S. Y.; Kim, K. R.; Park, S. H.; Choi, Y.; Song, Y. M.; Ahn, K. I.; Park, J. H

2005-04-01

The scope of the project includes four activities such as construction of DB, development of data base management tool, development of severe accident analysis code system and FP studies. In the construction of DB, level-1,2 PSA results and plant damage states event trees were mainly used to select the following target initiators based on frequencies: LLOCA, MLOCA, SLOCA, station black out, LOOP, LOFW and SGTR. These scenarios occupy more than 95% of the total frequencies of the core damage sequences at KSNP. In the development of data base management tool, SARD 2.0 was developed under the PC microsoft windows environment using the visual basic 6.0 language. In the development of severe accident analysis code system, MIDAS 1.0 was developed with new features of FORTRAN-90 which makes it possible to allocate the storage dynamically and to use the user-defined data type, leading to an efficient memory treatment and an easy understanding. Also for user's convenience, the input (IEDIT) and output (IPLOT) processors were developed and implemented into the MIDAS code. For the model development of MIDAS concerning the FP behavior, the one dimensional thermophoresis model was developed and it gave much improvement to predict the amount of FP deposited on the SG U-tube. Also the source term analysis methodology was set up and applied to the KSNP and APR1400.

Natural Circulation in the Blanket Heat Removal System During a Loss-of-Pumping Accident (LOFA) Based on Initial Conceptual Design

International Nuclear Information System (INIS)

Hamm, L.L.

1998-01-01

A transient natural convection model of the APT blanket primary heat removal (HR) system was developed to demonstrate that the blanket could be cooled for a sufficient period of time for long term cooling to be established following a loss-of-flow accident (LOFA). The particular case of interest in this report is a complete loss-of-pumping accident. For the accident scenario in which pumps are lost in both the target and blanket HR systems, natural convection provides effective cooling of the blanket for approximately 68 hours, and, if only the blanket HR systems are involved, natural convection is effective for approximately 210 hours. The heat sink for both of these accident scenarios is the assumed stagnant fluid and metal on the secondary sides of the heat exchangers

Design considerations for post accident monitoring system of a research reactor

International Nuclear Information System (INIS)

Jang, Gwi Sook; Park, Je Yun; Kim, Young Ki

2012-01-01

The Post Accident Monitoring System (PAMS) provides primary information for operators to assess the plant conditions and perform their role in bringing the plant to a safe condition during an accident. The PAMS of NPP (Nuclear Power Plant) in KOREA provides the continuous display of the PAM category 1 parameters specified in R.G 1.97, Rev. 03. Recently the PAMS of NPP has been designed according to R.G 1.97, Rev. 04. There is no PAMS at the HANARO in KOREA, but recently RRs (Research Reactors) around the world are going to have PAMS for various multi purposes. We should determine the design considerations for PAMS in a Korean RR based on the design state analysis. Thus, this paper proposes strategies on the design considerations for the PAMS of a Korean RR

Analysis of Fukushima Daiichi Accident Using HFACS

International Nuclear Information System (INIS)

Mohamed, Saeed Almheiri

2013-01-01

The shadow of Fukushima Daiichi nuclear power plant (NPP) accident is still too big and will last long. On the other hand, it could still teach us lots of lessons to better design and operate nuclear power plants. In this paper, we will be focusing on the Fukushima Daiichi accident, especially on human organizational factors. We will analyze the accident using Human Factors Analysis and Classification System (HFACS) in order to better understand the organizational climate of TEPCO 1 and NISA 2 that led to Fukushima Daiichi Accident. HFACS was developed for the U. S. aviation industry and has been used at many industries like the rail and mining industries. We found that the HFACS to be greatly beneficial in investigating the latent and organizational causes for the accident. The application results show that the causes of Fukushima Daiichi accident were spread out from sharp end (i.e. Unsafe Act) to blunt end (i. e. Organizational Influences). This means that the corresponding countermeasures should cover from front line staff to management. Thus, we managed to develop a better understanding on how to prevent similar errors or violations. The incident and near-miss have a lot of helpful information because it may show the actual and latent deficiencies of complex systems. We applied the HFACS into Fukushima Daiichi accident to better locate the causes related to both sharp and blunt ends of operation of NPP. In order to derive useful lessons from the accident analysis, the analyst should try to find the similarities not differences from the incident. It is imperative that whatever accident/incident analysis systems we use, we should fully utilize the disastrous Fukushima accident

Analysis of Fukushima Daiichi Accident Using HFACS

Energy Technology Data Exchange (ETDEWEB)

Mohamed, Saeed Almheiri [Korea Advanced Institue of Science and Technology, Daejeon (Korea, Republic of)

2013-10-15

The shadow of Fukushima Daiichi nuclear power plant (NPP) accident is still too big and will last long. On the other hand, it could still teach us lots of lessons to better design and operate nuclear power plants. In this paper, we will be focusing on the Fukushima Daiichi accident, especially on human organizational factors. We will analyze the accident using Human Factors Analysis and Classification System (HFACS) in order to better understand the organizational climate of TEPCO{sup 1} and NISA{sup 2} that led to Fukushima Daiichi Accident. HFACS was developed for the U. S. aviation industry and has been used at many industries like the rail and mining industries. We found that the HFACS to be greatly beneficial in investigating the latent and organizational causes for the accident. The application results show that the causes of Fukushima Daiichi accident were spread out from sharp end (i.e. Unsafe Act) to blunt end (i. e. Organizational Influences). This means that the corresponding countermeasures should cover from front line staff to management. Thus, we managed to develop a better understanding on how to prevent similar errors or violations. The incident and near-miss have a lot of helpful information because it may show the actual and latent deficiencies of complex systems. We applied the HFACS into Fukushima Daiichi accident to better locate the causes related to both sharp and blunt ends of operation of NPP. In order to derive useful lessons from the accident analysis, the analyst should try to find the similarities not differences from the incident. It is imperative that whatever accident/incident analysis systems we use, we should fully utilize the disastrous Fukushima accident.

A route-specific system for risk assessment of radioactive materials transportation accidents

International Nuclear Information System (INIS)

Moore, J.E.; Sandquist, G.M.; Slaughter, D.M.

1995-01-01

A low-cost, powerful geographic information system (GIS) that operates on a personal computer was integrated into a software system to provide route specific assessment of the risks associated with the atmospheric release of radioactive and hazardous materials in transportation accidents. The highway transportation risk assessment (HITRA) software system described here combines a commercially available GIS (TransCAD) with appropriate models and data files for route- and accident-specific factors, such as meteorology, dispersion, demography, and health effects to permit detailed analysis of transportation risk assessment. The HITRA system allows a user to interactively select a highway or railroad route from a GIS database of major US transportation routes. A route-specific risk assessment is then performed to estimate downwind release concentrations and the resulting potential health effects imposed on the exposed population under local environmental and temporal conditions. The integration of GIS technology with current risk assessment methodology permits detailed analysis coupled with enhanced user interaction. Furthermore, HITRA provides flexibility and documentation for route planning, updating and improving the databases required for evaluating specific transportation routes, changing meteorological and environmental conditions, and local demographics

Accident diagnosis system based on real-time decision tree expert system

Science.gov (United States)

Nicolau, Andressa dos S.; Augusto, João P. da S. C.; Schirru, Roberto

2017-06-01

Safety is one of the most studied topics when referring to power stations. For that reason, sensors and alarms develop an important role in environmental and human protection. When abnormal event happens, it triggers a chain of alarms that must be, somehow, checked by the control room operators. In this case, diagnosis support system can help operators to accurately identify the possible root-cause of the problem in short time. In this article, we present a computational model of a generic diagnose support system based on artificial intelligence, that was applied on the dataset of two real power stations: Angra1 Nuclear Power Plant and Santo Antônio Hydroelectric Plant. The proposed system processes all the information logged in the sequence of events before a shutdown signal using the expert's knowledge inputted into an expert system indicating the chain of events, from the shutdown signal to its root-cause. The results of both applications showed that the support system is a potential tool to help the control room operators identify abnormal events, as accidents and consequently increase the safety.

Large Break LOCA Accident Management Strategies for Accidents With Large Containment Leaks

International Nuclear Information System (INIS)

Sdouz, Gert

2006-01-01

The goal of this work is the investigation of the influence of different accident management strategies on the thermal-hydraulics in the containment during a Large Break Loss of Coolant Accident with a large containment leak from the beginning of the accident. The increasing relevance of terrorism suggests a closer look at this kind of severe accidents. Normally the course of severe accidents and their associated phenomena are investigated with the assumption of an intact containment from the beginning of the accident. This intact containment has the ability to retain a large part of the radioactive inventory. In these cases there is only a release via a very small leakage due to the un-tightness of the containment up to cavity bottom melt through. This paper represents the last part of a comprehensive study on the influence of accident management strategies on the source term of VVER-1000 reactors. Basically two different accident sequences were investigated: the 'Station Blackout'- sequence and the 'Large Break LOCA'. In a first step the source term calculations were performed assuming an intact containment from the beginning of the accident and no accident management action. In a further step the influence of different accident management strategies was studied. The last part of the project was a repetition of the calculations with the assumption of a damaged containment from the beginning of the accident. This paper concentrates on the last step in the case of a Large Break LOCA. To be able to compare the results with calculations performed years ago the calculations were performed using the Source Term Code Package (STCP), hydrogen explosions are not considered. In this study four different scenarios have been investigated. The main parameter was the switch on time of the spray systems. One of the results is the influence of different accident management strategies on the source term. In the comparison with the sequence with intact containment it was

Development of the simulation system IMPACT for analysis of nuclear power plant severe accidents

International Nuclear Information System (INIS)

Naitoh, Masanori; Ujita, Hiroshi; Nagumo, Hiroichi

1997-01-01

The Nuclear Power Engineering Corporation (NUPEC) has initiated a long-term program to develop the simulation system IMPACT for analysis of hypothetical severe accidents in nuclear power plants. IMPACT employs advanced methods of physical modeling and numerical computation, and can simulate a wide spectrum of senarios ranging from normal operation to hypothetical, beyond-design-basis-accident events. Designed as a large-scale system of interconnected, hierarchical modules, IMPACT's distinguishing features include mechanistic models based on first principles and high speed simulation on parallel processing computers. The present plan is a ten-year program starting from 1993, consisting of the initial one-year of preparatory work followed by three technical phases: Phase-1 for development of a prototype system; Phase-2 for completion of the simulation system, incorporating new achievements from basic studies; and Phase-3 for refinement through extensive verification and validation against test results and available real plant data

10 CFR 835.1304 - Nuclear accident dosimetry.

Science.gov (United States)

2010-01-01

...) Methods and equipment for analysis of biological materials; (3) A system of fixed nuclear accident... Nuclear accident dosimetry. (a) Installations possessing sufficient quantities of fissile material to... 10 Energy 4 2010-01-01 2010-01-01 false Nuclear accident dosimetry. 835.1304 Section 835.1304...

48 CFR 852.236-87 - Accident prevention.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Accident prevention. 852... Accident prevention. As prescribed in 836.513, insert the following clause: Accident Prevention (SEP 1993) The Resident Engineer on all assigned construction projects, or other Department of Veterans Affairs...

48 CFR 52.236-13 - Accident Prevention.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Accident Prevention. 52....236-13 Accident Prevention. As prescribed in 36.513, insert the following clause: Accident Prevention... contracts for construction or dismantling, demolition, or removal of improvements, the Contractor shall— (1...

Radioactive particles revealed by electron microscopy. Chemical and physical properties of radioactive particles in aerosol samples emitted during the early stage of Fukushima Dai-ichi Nuclear Power Plant accident

International Nuclear Information System (INIS)

Adachi, Kouji

2015-01-01

Water-insoluble radioactive materials emitted during an early stage of the Fukushima Dai-ichi Nuclear Power Plant accident in 2011 were identified, and their chemical and physical properties were characterized as particulate matters. In this report, studies on radioactive particles collected from filter samples in Tsukuba on March 14–15, 2011 are summarized. Their compositions, chemical states, sizes, shapes, crystallinity, and hygroscopicity were analyzed using microscopic analyses such as electron microscopy and synchrotron with a micro-beam. The results indicate that they include Cs, Fe, and Zn as well as elements from fission products and are water insoluble, spherical-glassy particles with ca. 2 micrometer in size. Understanding of their detailed properties is significant to improve the numerical models during the accident and to understand their occurrences in soil as well as the accident itself. In addition to the water-insoluble radioactive materials, water-soluble radioactive materials, which were likely emitted in different events during the accident, should be investigated to have comprehensive understanding of the accident and its environmental effects. More samples from various environments such as soil will be needed, and more detailed chemical and physical analyses will help to understand their formation process, influences on human health, and long term decrements in ambient conditions. (author)

Loss-of-Coolant and Loss-of-Flow Accidents in the SEAFP first wall/blanket cooling system

International Nuclear Information System (INIS)

Komen, E.M.J.; Koning, H.

1995-01-01

This paper presents the RELAP5/MOD3 thermal-hydraulic analysis of three Loss-of-Coolant Accidents (LOCAs) and three Loss-of-Flow Accidents (LOFAs) in the first wall/blanket cooling system of the SEAFP reactor design. The analyses deal with the transient thermal-hydraulic behaviour inside the cooling systems and the temperature development inside the nuclear components. As it appears, the temperature increase in the first wall Be-coating is limited to 30 K when an emergency plasma shutdown is initiated within 10 s following pump trip. (orig.)

Loss-of-coolant and loss-of-flow accidents in the SEAFP first wall/blanket cooling system

International Nuclear Information System (INIS)

Komen, E.M.J.; Koning, H.

1994-07-01

This paper presents the RELAP5/MOD3 thermal-hydraulic analysis of three Loss-of-Coolant Accidents (LOCAs) and three Loss-of-Flow Accidents (LOFAs) in the first wall/blanket cooling system of the SEAFP reactor design. The analyses deal with the transient thermal-hydraulic behaviour inside the cooling systems and the temperature development inside the nuclear components. As it appears, the temperature increase in the first wall Be-coating is limited to 30 K when an emergency plasma shutdown is initiated within 10 s following pump trip. (orig.)

Modification of MELCOR for severe accident analysis of candidate accident tolerant cladding materials

Energy Technology Data Exchange (ETDEWEB)

Merrill, Brad J., E-mail: brad.merrill@inl.gov; Bragg-Sitton, Shannon M., E-mail: shannon.bragg-sitton@inl.gov; Humrickhouse, Paul W., E-mail: paul.humrickhouse@inl.gov

2017-04-15

Highlights: • Accident tolerant fuels (ATF) systems are currently under development for LWRs. • Many performance analysis tools are specifically developed for UO{sub 2}–Zr alloy fuel. • Modifications were made to the MELCOR code for candidate ATF cladding. • Preliminary analysis results for SiC and FeCrAl cladding concepts are presented. - Abstract: A number of materials are currently under development as candidate accident tolerant fuel and cladding for application in the current fleet of commercial light water reactors (LWRs). The safe, reliable and economic operation of the nation’s nuclear power reactor fleet has always been a top priority for the nuclear industry. Continual improvement of technology, including advanced materials and nuclear fuels, remains central to the industry’s success. Enhancing the accident tolerance of light water reactors became a topic of serious discussion following the 2011 Great East Japan Earthquake, resulting tsunami, and subsequent damage to the Fukushima Daiichi nuclear power plant complex. The overall goal for the development of accident tolerant fuel (ATF) systems for LWRs is to identify alternative fuel system technologies to further enhance the safety, competitiveness, and economics of commercial nuclear power. Designed for use in the current fleet of commercial LWRs, or in reactor concepts with design certifications (GEN-III+), to achieve their goal enhanced ATF must endure loss of active cooling in the reactor core for a considerably longer period of time than the current fuel system, while maintaining or improving performance during normal operation. Many available nuclear fuel performance analysis tools are specifically developed for the current UO{sub 2}–Zirconium alloy fuel system. The MELCOR severe-accident analysis code, under development at the Sandia National Laboratory in New Mexico (SNL-NM) for the US Nuclear Regulatory Commission (NRC), is one of these tools. This paper describes modifications

Determination of neutron dose from criticality accidents with bioassays for sodium-24 in blood and phosphorus-32 in hair

International Nuclear Information System (INIS)

Feng, Y.; Miller, L.F.; Brown, K.S.; Casson, W.H.; Mei, G.T.; Thein, M.

1993-06-01

A comprehensive review of accident neutron dosimetry using blood and hair analysis was performed and is summarized in this report. Experiments and calculations were conducted at Oak Ridge National Laboratory (ORNL) and the University of Tennessee (UT) to develop measurement techniques for the activity of 24 Na in blood and 32 P in hair for nuclear accident dosimetry. An operating procedure was established for the measurement of 24 Na in blood using an HPGe detector system. The sensitivity of the measurement for a 20-mL sample is 0.01-0.02 Gy of total neutron dose for hard spectra and below 0.005 Gy for soft spectra based on a 30- to 60-min counting time. The operating procedures for direct counting of hair samples are established using a liquid scintillation detector. Approximately 0.06-0.1 Gy of total neutron dose can be measured from a 1-g hair sample using this procedure. Detailed procedures for chemical dissolution and ashing of hair samples are also developed. A method is proposed to use blood and hair analysis for assessing neutron dose based on a collection of 98 neutron spectra. Ninety-eight blood activity-to-dose conversion factors were calculated. The calculated results for an uncollided fission spectrum compare favorably with previously published data for fission neutrons. This nuclear accident dosimetry system makes it possible to estimate an individual's neutron dose within a few hours after an accident if the accident spectrum can be approximated from one of 98 tabulated neutron spectrum descriptions. If the information on accident and spectrum description is not available, the activity ratio of 32 P in hair and 24 Na in blood can provide information related to the neutron spectrum for dose assessment

The United States Department of Energy (DOE) Computerized Accident/Incident Reporting System (CAIRS)

International Nuclear Information System (INIS)

Briscoe, G.J.

1993-01-01

The Department of Energy's (DOE) Computerized Accident/Incident Reporting System (CAIRS) is a comprehensive data base containing more than 50,000 investigation reports of injury/illness, property damage and vehicle accident cases representing safety data from 1975 to the present for more than 150 DOE contractor organizations. A special feature is that the text of each accident report is translated using a controlled dictionary and rigid sentence structure called Factor Relationship and Sequence of Events (FRASE) that enhances the ability to retrieve specific types of information and to perform detailed analyses. DOE summary and individual contractor reports are prepared quarterly and annually. In addition, ''Safety Performance Profile'' reports for individual organizations are prepared to provide advance information to appraisal teams, and special topical reports are prepared for areas of concern such as an increase in the number of security injuries or environmental releases. The data base is open to all DOE and Contractor registered users with no access restrictions other than that required by the Privacy Act

Analysis of factors associated with traffic accidents of cyclists attended in Brazilian state capitals.

Science.gov (United States)

Sousa, Carlos Augusto Moreira de; Bahia, Camila Alves; Constantino, Patrícia

2016-12-01

Brazil has the sixth largest bicycles fleet in the world and bicycle is the most used individual transport vehicle in the country. Few studies address the issue of cyclists' accidents and factors that contribute to or prevent this event. VIVA is a cross-sectional survey and is part of the Violence and Accidents Surveillance System, Brazilian Ministry of Health. We used complex sampling and subsequent data review through multivariate logistic regression and calculation of the respective odds ratios. Odds ratios showed greater likelihood of cyclists' accidents in males, people with less schooling and living in urban and periurban areas. People who were not using the bike to go to work were more likely to suffer an accident. The profile found in this study corroborates findings of other studies. They claim that the coexistence of cyclists and other means of transportation in the same urban space increases the likelihood of accidents. The construction of bicycle-exclusive spaces and educational campaigns are required.

Utilization of accident databases and fuzzy sets to estimate frequency of HazMat transport accidents

International Nuclear Information System (INIS)

Qiao Yuanhua; Keren, Nir; Mannan, M. Sam

2009-01-01

Risk assessment and management of transportation of hazardous materials (HazMat) require the estimation of accident frequency. This paper presents a methodology to estimate hazardous materials transportation accident frequency by utilizing publicly available databases and expert knowledge. The estimation process addresses route-dependent and route-independent variables. Negative binomial regression is applied to an analysis of the Department of Public Safety (DPS) accident database to derive basic accident frequency as a function of route-dependent variables, while the effects of route-independent variables are modeled by fuzzy logic. The integrated methodology provides the basis for an overall transportation risk analysis, which can be used later to develop a decision support system.

MAAP-CANDU simulations of LOCA/LOECI accidents at Darlington NGS

International Nuclear Information System (INIS)

Kwee, M.T.; Choi, M.H.; Leung, R.K.

1996-01-01

Severe accidents have been the subject of a great deal of analysis and research, particularly in the light water reactor community. Although severe accident analysis in Canada deuterium-uranium (CANDU) reactors has not been published abundantly, a significant body of research and analysis has been accumulated. This has occurred because CANDU has directly taken into consideration a set of severe accidents [e.g loss-of-coolant accidents (LOCAs) coincident with a loss-of-emergency-coolant injection (LOECI)] in the design basis. These accidents have served to define the design requirements that ensure the integrity of the heat transport system. The CANDU reactor design has inherent heat sinks such as the primary heat transport system, the secondary side, moderator system, and shielding system (shield tank and end shields). These heat sinks are significant and are able to moderate or terminate the progression of severe accidents that go beyond the design base cases. These types of accidents are typically analyzed at Ontario Hydro in conjunction with probabilistic safety analysis (PSA), where the severe accident consequences are analyzed by a series of conservative hand-calculation methods

41 CFR 101-39.407 - Accident records.

Science.gov (United States)

2010-07-01

...-INTERAGENCY FLEET MANAGEMENT SYSTEMS 39.4-Accidents and Claims § 101-39.407 Accident records. If GSA's records... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Accident records. 101-39.407 Section 101-39.407 Public Contracts and Property Management Federal Property Management...

Experience with neutron flux monitoring systems qualified for post-accident monitoring

International Nuclear Information System (INIS)

Shugars, H.G.; Miller, J.F.

1995-01-01

In this paper we discuss the environmental requirements for excore neutron flux monitors that are qualified for use during and after postulated accidents in Pressurized Water Reactors (PWRs). We emphasize PWRs designed in the United States, which are similar to those used also in parts of Western Europe and Eastern Asia. We then discuss design features of the flux monitoring systems necessary to address the environmental, functional, and regulatory requirements, and the experience with these systems. (author). 9 refs, 2 figs

The consequences of the Chernobyl nuclear accident in Greece - Report No. 2

International Nuclear Information System (INIS)

1986-12-01

In this report a realistic estimate of the radioactive fallout on Greece from the Chernobyl nuclear accident is described. The measurements performed on environmental samples and samples of the food chain, as well as some realistic estimations for the population doses and the expected consequences of the accident are presented. The analysis has shown that the radiological impact of the accident in Greece can be considered minor. (J.K.)

Postulated accidents

International Nuclear Information System (INIS)

Ullrich, W.

1980-01-01

This lecture on 'Postulated Accidents' is the first of a series of lectures on the dynamic and transient behaviour of nuclear power plants, especially pressurized water reactors. The main points covered will be: Reactivity Accidents, Transients (Intact Loop) and Loss of Cooland Accidents (LOCA) including small leak. This lecture will discuss the accident analysis in general, the definition of the various operational phases, the accident classification, and, as an example, an accident sequence analysis on the basis of 'Postulated Accidents'. (orig./RW)

Participation of IRD/CNEN-Br in International Intercomparison of Criticality Accident Dosimetry Systems at Silene reactor, France

International Nuclear Information System (INIS)

Mauricio, Claudia Lucia P.; Fonseca, Evaldo S. da

1996-01-01

IRD has participated in an International Intercomparison of Criticality Accident Dosimetry Systems at the SILENE reactor, France on June 1993. The dosemeters were irradiated on phantoms and free in air, in bare and lead shield reactor pulses, simulating different irradiation fields that can be found in criticality accidents. Comparing with the reference measurements, the calculated mean neutron kerma found by IRD was only 2% greater for lead shield and 14% greater for bare reactor. For gamma absorbed dose, the differences were, respectively + 22% and -9% for the dosemeters free in air and -19% and -9% for dosemeters on phantoms. IRD results are closer to the real values than the mean values measured by the participants. IRD results show a good performance if its simple criticality accident system. (author)

Accident assessment under emergency situation in Daya Bay nuclear power station

International Nuclear Information System (INIS)

Yang Ling; Chen Degan; Lin Shumou; Fu Guohui

2004-01-01

The accident assessment under emergency situation includes the accident status evaluation and its consequence estimation. This paper introduces evaluation methods for accident status and its assistant computer system (SESAME-GNP) utilized during the emergency situation in Guangdong Daya Bay Nuclear Power Station (GNPS) in detail. At the same time, an improved accident consequence estimation system in GNPS (RACAS-GNP) is briefly described. With the improvement of the accident assessment systems, the capability of emergency response in GNPS is strengthened

High efficiency mixed species radioiodine air sampling, readout, and dose assessment system

International Nuclear Information System (INIS)

Distenfeld, C.; Klemish, J.

1976-05-01

Reactor accidents require monitoring to assess the impact to persons in the environment. This implies methods and apparatus to accurately and economically sample and evaluate possible released activity. The development of a prototype iodine air sampling system that can differentiate against noble gas activity and be evaluated by standard Civil Defense instrumentation is reported. The apparatus can efficiently (95 percent) collect organic or inorganic, particulate or gaseous radioiodine in concentrations below stable atmospheric iodine, and under severe ambient conditions. Response to noble fission gases was reduced to less than 4 x 10 -4 of an equal iodine airborne activity by heating the collector to approximately 100 0 C. Reliable sample size, +-5 percent, was achieved by using a simple air flow regulator. Thyroid dose commitment was mathematically and graphically related to the iodine isotope distribution expected in the environment and to the response of the Civil Defense CDV-700 instrument used to evaluate the sample. Sensitivity of the method allows dose assessment of 1 to 2 rads to a child's thyroid

Can cultural differences lead to accidents? Team cultural differences and sociotechnical system operations.

Science.gov (United States)

Strauch, Barry

2010-04-01

I discuss cultural factors and how they may influence sociotechnical system operations. Investigations of several major transportation accidents suggest that cultural factors may have played a role in the causes of the accidents. However, research has not fully addressed how cultural factors can influence sociotechnical systems. I review literature on cultural differences in general and cultural factors in sociotechnical systems and discuss how these differences can affect team performance in sociotechnical systems. Cultural differences have been observed in social and interpersonal dimensions and in cognitive and perceptual styles; these differences can affect multioperator team performance. Cultural factors may account for team errors in sociotechnical systems, most likely during high-workload, high-stress operational phases. However, much of the research on cultural factors has methodological and interpretive shortcomings that limit their applicability to sociotechnical systems. Although some research has been conducted on the role of cultural differences on team performance in sociotechnical system operations, considerable work remains to be done before the effects of these differences can be fully understood. I propose a model that illustrates how culture can interact with sociotechnical system operations and suggest avenues of future research. Given methodological challenges in measuring cultural differences and team performance in sociotechnical system operations, research in these systems should use a variety of methodologies to better understand how culture can affect multioperator team performance in these systems.

Incidence of posttraumatic stress disorder after traffic accidents in Germany.

Science.gov (United States)

Brand, Stephan; Otte, Dietmar; Petri, Maximilian; Decker, Sebastian; Stübig, Timo; Krettek, Christian; Müller, Christian W

2014-01-01

Posttraumatic stress disorder (PTSD) is possibly an overlooked diagnosis of victims suffering from traffic accidents sustaining serious to severe injuries. This paper investigates the incidence of PTSD after traffic accidents in Germany. Data from an accident research unit were analyzed in regard to collision details, and preclinical and clinical data. Preclinical data included details on crash circumstances and estimated injury severity as well as data on victims' conditions (e.g. heart rate, blood pressure, consciousness, breath rate). Clinical data included initial assessment in the emergency department, radiographic diagnoses, and basic life parameters comparable to the preclinical data as well as follow-up data on the daily ward. Data were collected in the German-In-Depth Accident Research study, and included gender, type of accident (e.g. type of vehicle, road conditions, rural or urban area), mental disorder, and AIS (Abbreviated Injury Scale) head score. AIS represent a scoring system to measure the injury severity of traffic accident victims. A total 258 out of 32807 data sets were included in this analysis. Data on accident and victims was collected on scene by specialized teams following established algorithms. Besides higher AIS Head scores for male motorcyclists compared to all other subgroups, no significant correlation was found between the mean maximum AIS score and the occurrence of PTSD. Furthermore, there was no correlation between higher AIS head scores, gender, or involvement in road traffic accidents and PTSD. In our study the overall incidence of PTSD after road traffic accidents was very low (0.78% in a total of 32.807 collected data sets) when compared to other published studies. The reason for this very low incidence of PTSD in our patient sample could be seen in an underestimation of the psychophysiological impact of traffic accidents on patients. Patients suffering from direct experiences of traumatic events such as a traffic accident

The relationships between organizational and individual variables to on-the-job driver accidents and accident-free kilometres.

Science.gov (United States)

Caird, J K; Kline, T J

2004-12-01

Highway fatalities are the leading cause of fatal work injuries in the US, accounting for approximately 1 in 4 of the 5900 job-related deaths during 2001. The present study focused on the contribution of organizational factors and driver behaviours to on-the-job driving accidents in a large Western Canadian corporation. A structural equation modelling (SEM) approach was used which allows researchers to test a complex set of relationships within a global theoretical framework. A number of scales were used to assess organizational support, driver errors, and driver behaviours. The sample of professional drivers that participated allowed the recording of on-the-job accidents and accident-free kilometres from their personnel files. The pattern of relationships in the fitted model, after controlling for exposure and social desirability, provides insight into the role of organizational support, planning, environment adaptations, fatigue, speed, errors and moving citations to on-the-job accidents and accident-free kilometres. For example, organizational support affected the capacity to plan. Time to plan work-related driving was found to predict accidents, fatigue and adaptations to the environment. Other interesting model paths, SEM limitations, future research and recommendations are elaborated.

Corporate Cost of Occupational Accidents

DEFF Research Database (Denmark)

Rikhardsson, Pall M.; Impgaard, M.

2004-01-01

method could be used in all of the companies without revisions. The evaluation of accident cost showed that 2/3 of the costs of occupational accidents are visible in the Danish corporate accounting systems reviewed while 1/3 is hidden from management view. The highest cost of occupational accidents......The systematic accident cost analysis (SACA) project was carried out during 2001 by The Aarhus School of Business and PricewaterhouseCoopers Denmark with financial support from The Danish National Working Environment Authority. Its focused on developing and testing a method for evaluating...... occupational costs of companies for use by occupational health and safety professionals. The method was tested in nine Danish companies within three different industry sectors and the costs of 27 selected occupational accidents in these companies were calculated. One of the main conclusions is that the SACA...

Portable Filtered Air Suction System for Released Radioactive Gases Prevention under a Severe Accident of NPPs

International Nuclear Information System (INIS)

Gu, Beom W.; Choi, Su Y.; Rim, Chun T.

2013-01-01

In this paper, the portable filtered air suction system (PoFASS) for released radioactive gases prevention under a severe accident of NPP is proposed. This technology can prevent the release of the radioactive gases to the atmosphere and it can be more economical than FVCS because PoFASS can cover many NPPs with its high mobility. The conceptual design of PoFASS, which has the highest cost effectiveness and robustness to the environment condition such as wind velocity and precipitation, is suggested and the related previous research is introduced in this paper. The portable filtered air suction system (PoFASS) for released radioactive gases prevention can play a key role to mitigate the severe accident of NPP with its high cost effectiveness and robustness to the environment conditions. As further works, the detail design of PoFASS to fabricate a prototype for a demonstration will be proceeded. When released radioactive gases from the broken containment building in the severe accident of nuclear power plants (NPPs) such as the Chernobyl and Fukushima accidents occur, there are no ways to prevent the released radioactive gases spreading in the air. In order to solve this problem, several European NPPs have adopted the filtered vented containment system (FVCS), which can avoid the containment failure through a pressure relief capability to protect the containment building against overpressure. However, the installation cost of FVCS for a NPP is more than $10 million and this system has not been widely welcomed by NPP operating companies due to its high cost

Accident management

International Nuclear Information System (INIS)

Lutz, R.J.; Monty, B.S.; Liparulo, N.J.; Desaedeleer, G.

1989-01-01

The foundation of the framework for a Severe Accident Management Program is the contained in the Probabilistic Safety Study (PSS) or the Individual Plant Evaluations (IPE) for a specific plant. The development of a Severe Accident Management Program at a plant is based on the use of the information, in conjunction with other applicable information. A Severe Accident Management Program must address both accident prevention and accident mitigation. The overall Severe Accident Management framework must address these two facets, as a living program in terms of gathering the evaluating information, the readiness to respond to an event. Significant international experience in the development of severe accident management programs exist which should provide some direction for the development of Severe Accident Management in the U.S. This paper reports that the two most important elements of a Severe Accident Management Program are the Emergency Consultation process and the standards for measuring the effectiveness of individual Severe Accident Management Programs at utilities

Applications of nano-fluids to enhance LWR accidents management in in-vessel retention and emergency core cooling systems

International Nuclear Information System (INIS)

Chupin, A.; Hu, L. W.; Buongiorno, J.

2008-01-01

Water-based nano-fluid, colloidal dispersions of nano-particles in water; have been shown experimentally to increase the critical heat flux and surface wettability at very low concentrations. The use of nano-fluids to enhance accidents management would allow either to increase the safe margins in case of severe accidents or to upgrade the power of an existing power plant with constant margins. Building on the initial work, computational fluid dynamics simulations of the nano-fluid injection system have been performed to evaluate the feasibility of a nano-fluid injection system for in-vessel retention application. A preliminary assessment was also conducted on the emergency core cooling system of the European Pressurized Reactor (EPR) to implement a nano-fluid injection system for improving the management of loss of coolant accidents. Several design options were compared/or their respective merits and disadvantages based on criteria including time to injection, safety impact, and materials compatibility. (authors)

Monitoring of Radionuclide Contamination in Food Samples in Malaysia due to Daiichi Reactor Accident in Fukushima, Japan

International Nuclear Information System (INIS)

Nurrul Assyikeen Mohd Jaffary; Wo, Y.M.; Abdul Kadir Ishak

2015-01-01

On March 11, 2011, a serious accident occurred in Daiichi nuclear reactor plant, Fukushima, Japan which caused radioactive materials been released into the atmosphere in the form of aerosols and dust particles. Sea water around the plant was also found contaminated with high radioactivity readings. These radioactive materials could be transported by the winds and ocean current across international borders and cannot be controlled by human. Thus, a continuous monitoring activity of radionuclide content in the air and sea water needs to be conducted by the authorities. In addition to radioactivity monitoring, Malaysia should also control the entry of contaminated food in order to prevent radionuclide ingestion by human. The radionuclide 131 I, 134 Cs and 137 Cs were used as a measure of pollution levels and counted with gamma spectrometry using standard analysis method suggested by AOAC International. In this paper, details description of the role of Radiochemical and Environment Group, Nuclear Malaysia who is responsible in analyzing the radioactivity in the food samples due to Fukushima Daiichi, Japan accident was included. The radioactivity limit adopted and analysis results from this monitoring were discussed. (author)

[Under registration of occupational accidents in São Paulo, Brazil, 1997].

Science.gov (United States)

Binder, Maria Cecília Pereira; Cordeiro, Ricardo

2003-08-01

To estimate the number of occupational accidents that occurred in a certain municipality during a specific period of time as well as the extent of sub-registration. The study sample was comprised of 4.782 households within the municipality of Botucatu, São Paulo occupied by a total 17,219 inhabitants on the 1st of July, 1997. In each household, an adult inhabitant was interviewed in order to identify the occurrence of occupational accidents in the three months preceding the interview. When such occurrences were identified, the injured workers were interviewed. The Cochran formula was utilized to calculate the confidence interval. Seventy-six individuals confirmed that they had suffered occupational accidents during these three months. In 1997, there were approximately 1,810 occupational accidents in Botucatu, according to our estimates, and the incidence of work related injuries in the population was approximately 4.1% (CI 95% 3.0%-5.3%). Thirty-nine (51.3%, CI 95% 41.1%61.6%) of the above 76 workers were not covered by the Social Security System. Consequently, their injuries were not reported for there was no legally binding obligation to fill out and emit the official registration form - Comunicação de Acidente do Trabalho (CAT) [the work injury report]. Included among the latter are civil servants and informal sector workers, such as self-employed, casual workers and others. Although the remaining 37 workers (48.7%) were covered by the Social Security System and emission of the work injury report was obligatory, 20 of the cases (54.1% CI 95% 39.4%-68.7%) had not been registered. A greater proportion of cases of sub-registration were found among those workers employed in micro, small and medium sized businesses than among those working in large firms. Only 22.4% (CI 13.8%-30.9%) of the occupational accidents reported in this study were registered by the Social Security System. Research findings confirm that analyses based on the number of officially registered

REAC/TS radiation accident registry. Update of accidents in the United States

International Nuclear Information System (INIS)

Ricks, R.C.; Berger, M.E.; Holloway, E.C.; Goans, R.E.

2000-01-01

Serious injury due to ionizing radiation is a rare occurrence. From 1944 to the present, 243 US accidents meeting dose criteria for classification as serious are documented in the REAC/TS Registry. Thirty individuals have lost their lives in radiation accidents in the United States. The Registry is part of the overall REAC/TS program providing 24-hour direct or consultative assistance regarding medical and heath physics problems associated with radiation accidents in local, national, and international incidents. The REAC/TS Registry serves as a repository of medically important information documenting the consequences of these accidents. Registry data are gathered from various sources. These include reports from the World Heath Organization (WHO), International Atomic Energy Agency (IAEA), US Nuclear Regulatory Commission (US NRC), state radiological health departments, medical/health physics literature, personal communication, the Internet, and most frequently, from calls for medical assistance to REAC/TS, as part of our 24-hour medical assistance program. The REAC/TS Registry for documentation of radiation accidents serves several useful purposes: 1) weaknesses in design, safety practices, training or control can be identified, and trends noted; 2) information regarding the medical consequences of injuries and the efficacy of treatment protocols is available to the treating physician; and 3) Registry case studies serve as valuable teaching tools. This presentation will review and summarize data on the US radiation accidents including their classification by device, accident circumstances, and frequency by respective states. Data regarding accidents with fatal outcomes will be reviewed. The inclusion of Registry data in the IAEA's International Reporting System of Radiation Events (RADEV) will also be discussed. (author)

Safety study on nuclear heat utilization system - accident delineation and assessment on nuclear steelmaking pilot plant

International Nuclear Information System (INIS)

Yoshida, T.; Mizuno, M.; Tsuruoka, K.

1982-01-01

This paper presents accident delineation and assessment on a nuclear steelmaking pilot plant as an example of nuclear heat utilization systems. The reactor thermal energy from VHTR is transported to externally located chemical process plant employing helium-heated steam reformer by an intermediate heat transport loop. This paper on the nuclear steelmaking pilot plant will describe (1) system transients under accident conditions, (2) impact of explosion and fire on the nuclear reactor and the public and (3) radiation exposure on the public. The results presented in this paper will contribute considerably to understanding safety features of nuclear heat utilization system that employs the intermediate heat transport loop and the helium-heated steam reformer

Contributing factors in construction accidents.

Science.gov (United States)

Haslam, R A; Hide, S A; Gibb, A G F; Gyi, D E; Pavitt, T; Atkinson, S; Duff, A R

2005-07-01

This overview paper draws together findings from previous focus group research and studies of 100 individual construction accidents. Pursuing issues raised by the focus groups, the accident studies collected qualitative information on the circumstances of each incident and the causal influences involved. Site based data collection entailed interviews with accident-involved personnel and their supervisor or manager, inspection of the accident location, and review of appropriate documentation. Relevant issues from the site investigations were then followed up with off-site stakeholders, including designers, manufacturers and suppliers. Levels of involvement of key factors in the accidents were: problems arising from workers or the work team (70% of accidents), workplace issues (49%), shortcomings with equipment (including PPE) (56%), problems with suitability and condition of materials (27%), and deficiencies with risk management (84%). Employing an ergonomics systems approach, a model is proposed, indicating the manner in which originating managerial, design and cultural factors shape the circumstances found in the work place, giving rise to the acts and conditions which, in turn, lead to accidents. It is argued that attention to the originating influences will be necessary for sustained improvement in construction safety to be achieved.

Review of design criteria for Criticality Accident Alarm System (CAAS) used in Fuel Reprocessing Facility

International Nuclear Information System (INIS)

Chandrasekaran, S.; Basu, Pew; Sivasubramaniyan, K.; Venkatraman, B.

2016-01-01

Though fuel cycle facilities handling fissile materials are designed with careful criticality safety analysis, the criticality accident cannot be ruled out completely. Criticality Accident Alarm System (CAAS) is being installed as part of criticality safety management in fuel cycle facilities. CAAS system being used in India, is ECIL make, ionization chamber based gamma detector, which houses three identical detectors and works on 2/3 logic. As per ISO 7753 and ANSI/ANS-8.3, the CAAS must be designed to be capable of detecting any minimum accident occurs which could be of concern. Based on this, alarm limit used in CAAS is: 4 R/h (fast transient excursion) and 3 mR in 0.5 sec (slow excursion). In case of reprocessing facilities wherein process tanks located in heavy shielding, identification of CAAS installation locations require detailed radiation transport calculations. A study has been taken to estimate the gamma dose rate from thick concrete hot cells in order to determine the locations of CAAS to meet the present design criteria of alarm limit

Process criticality accident likelihoods, consequences and emergency planning

International Nuclear Information System (INIS)

McLaughlin, T.P.

1992-01-01

Evaluation of criticality accident risks in the processing of significant quantities of fissile materials is both complex and subjective, largely due to the lack of accident statistics. Thus, complying with national and international standards and regulations which require an evaluation of the net benefit of a criticality accident alarm system, is also subjective. A review of guidance found in the literature on potential accident magnitudes is presented for different material forms and arrangements. Reasoned arguments are also presented concerning accident prevention and accident likelihoods for these material forms and arrangements. (Author)

Development of severe accident guidance module for the SATS simulator

International Nuclear Information System (INIS)

Kim, K.R.; Park, S.H.; Kim, D.H.; Song, Y.M.

2004-01-01

Recently KAERI has developed the severe accident management guidance to establish Korea standard severe accident management system. On the other hand the PC-based severe accident training simulator SATS has been developed, which uses MELCOR code as the simulation engine. SATS graphically displays and simulates the severe accidents with interactive user commands. The control capability of SATS could make severe accident training course more interesting and effective. In this paper we will describe the development and functions of the electrical hypertext guidance module HyperKAMG and the SATS-HyperKAMG linkage system for the severe accident management. (author)

MDEP Common Position CP-EPRWG-04. Common position on EPR containment heat removal system in accident conditions

International Nuclear Information System (INIS)

2015-01-01

The importance of the integrity of the containment as a fundamental barrier to protect the people and environment against the effects of a nuclear accident is well established. In this regard, an essential objective is that the necessity for off-site counter-measures to reduce radiological consequences be limited or even eliminated. The design should provide engineering means to address those sequences which would otherwise lead to large or early releases, even in case of severe external hazards. The plant shall be designed so that it can be brought into a controlled and stable state and the containment function can be maintained, under accident conditions in which there is a significant amount of radioactive material in the containment, i.e. resulting from severe degradation of the reactor core. It is expected that due consideration to these requirements is to be given while tailoring long term loss of electrical power mitigation strategies. In order to reliably maintain the containment barrier, the regulators believe that: - safety features specifically designed for fulfilling safety functions required in core melt accidents shall be independent to the extent reasonably practicable from the Systems, Structures and Components (SSC) of the other levels of defense; - safety features specifically designed for fulfilling safety functions required in core melt accidents shall be safety classified and adequately qualified for the core melt accident environmental conditions for the time frame for which they are required to operate. In the light of the Fukushima Daiichi accident, the regulators believe that those safety features shall be designed with an adequate margin as compared to the levels of natural hazards considered for the site hazard evaluation; - the systems and components necessary for ensuring the containment function in a core melt accident shall have reliability commensurate with the function that they are required to fulfil. This may require redundancy of

Application research of cloud computing in emergency system platform of nuclear accidents

International Nuclear Information System (INIS)

Zhang Yan; Yue Huiguo; Lin Quanyi; Yue Feng

2013-01-01

This paper described the key technology of the concept of cloud computing, service type and implementation methods. Combined with the upgrade demand of nuclear accident emergency system platform, the paper also proposed the application design of private cloud computing platform, analyzed safety of cloud platform and the characteristics of cloud disaster recovery. (authors)

Regulatory approach to accident management in Sweden

International Nuclear Information System (INIS)

Hoegberg, L.

1989-01-01

The Swedish accident management program includes the following components: definition of overall safety and radiation protection objectives for the program; definition of appropriate accident management strategies to reach these objectives, based on plant-specific severe accident analysis; development and installation of appropriate accident management systems and associated management procedure; definition of roles and resposibilities for plant staff involved in accident management and implementation of appropriate training programs. The discussion of these components tries to highlight the basic technical concepts and approaches and the underlying safety philosophy rather than going into design details. 5 figs., 7 refs

A modular structure to accident identification using neural networks

International Nuclear Information System (INIS)

Duque Estrada, Cassius Rodrigo

2005-01-01

This work uses the accident identification method based on Artificial Neural Networks (ANN) as basic blocks of a modular structure, allowing the inclusion of new accidents to be identified without modifying the ANN already trained. This structure comprises several modules for accident identification and one module for analysis. Each identification module follows the structure of the basic block. The identification modules are responsible for the recognition of an accident belonging to the specific set of events for which it were trained. The analysis module processes the output from the identification module to determine the system response. In order to test this structure it was proposed a transient identification problem comprising fifty accidents distributed in five identification modules. The results have demonstrated that the accident identification method used as basic block of a modular structure allows the inclusion of new sets of accidents, or variations of a same accident, without modifying the ANN already trained. For this, it is enough to include into the system an specific module for this new set of accidents. (author)

analysis of reactivity accidents in MTR for various protection system parameters and core condition

International Nuclear Information System (INIS)

Mohamed, F.M.

2011-01-01

Egypt Second Research Reactor (ETRR-2) core was modified to irradiate LEU (Low Enriched Uranium) plates in two irradiation boxes for fission 99 Mo production. The old core comprising 29 fuel elements and one Co Irradiation Device (CID) and the new core comprising 27 fuel elements, CID, and two 99 Mo production boxes. The in core irradiation has the advantage of no special cooling or irradiation loop is required. The purpose of the present work is the analysis of reactivity accidents (RIA) for ETRR-2 cores. The analysis was done to evaluate the accidents from different point of view:1- Analysis of the new core for various Reactor Protection System (RPS) parameters 2- Comparison between the two cores. 3- Analysis of the 99 Mo production boxes.PARET computer code was employed to compute various parameters. Initiating events in RIA involve various modes of reactivity insertion, namely, prompt critical condition (p=1$), accidental ejection of partial and complete CID uncontrolled withdrawal of a control rod accident, and sudden cooling of the reactor core. The time histories of reactor power, energy released, and the maximum fuel, clad and coolant temperatures of fuel elements and LEU plates were calculated for each of these accidents. The results show that the maximum clad temperatures remain well below the clad melting of both fuel and uranium plates during these accidents. It is concluded that for the new core, the RIA with scram will not result in fuel or uranium plate failure.

Radioactive inventories from the Kyshtym and Karachay accidents: estimates based on soil samples collected in the South Urals (1990-1995)

DEFF Research Database (Denmark)

Aarkrog, A.; Dahlgaard, H.; Nielsen, S.P.

1997-01-01

The implementation of the nuclear programme in the Cheliabinsk region in the Ural, where plutonium for the first Soviet nuclear weapons was produced, involved radioactive contamination of the environment. The end of the cold war in the late 1980s initiated a fruitful co-operation between Russian...... and Western radioecologists. The present study is a joint Russian-Ukrainian-Danish effort to make an independent estimate of the inventories of Sr-90, Cs-137 and Pu-239,Pu-240 from two major contamination events in the South Urals, namely, the Kyshtym accident in 1957 and the Karachay wind dispersion in 1967....... The calculations are based upon deposition measurements of the radionuclides carried out on soil samples assuming that the depositions decreased exponentially with distance from the two sources. The inventory estimates are compared with the available Russian information on the two accidents. (C) 1997 Elsevier...

Application of GIS in prediction and assessment system of off-site accident consequence for NPP

International Nuclear Information System (INIS)

Wang Xingyu; Shi Zhongqi

2002-01-01

The assessment and prediction software system of off-site accident consequence for Guangdong Nuclear Power Plant (GNARD2.0) is a GIS-based software system. The spatial analysis of radioactive materials and doses with geographic information is available in this system. The structure and functions of the GNARD system and the method of applying ArcView GIS are presented

Developing Off-site Emergency Preparedness and Response Model (OEPRM) for Severe Accident of NPP in a Densely Populated Country Using System Dynamics Approach

Energy Technology Data Exchange (ETDEWEB)

Hossena, Muhammed Mufazzal; Kang, Kyoung Ho; Song, Jin Ho [KAERI, Deajeon (Korea, Republic of)

2016-05-15

The main objectives of this study are to find the influencing factors of systems and sub-systems of OEPRM, to find the interdependency among the influencing factors, and to develop a conceptual qualitative OEPRM for densely populated NPP country in case of SA using system dynamics (SD). NPP accidents are classified as nuclear accidents and incidents depending on the severity. Severe accident (SA) is certain low probability accident that are beyond design basis accident which may arise due to multiple failures of safety systems leading to significant core degradation and jeopardize the integrity of many or all of the barriers to the release of radioactive material. The weakness to the off-site emergency response in the time of Fukushima accident was observed. So, it is crucial to develop an off-site emergency preparedness and responses model (OEPRM) for radiological emergency in densely populated country from the Fukushima emergency response lesson. In this study, an OEPRM is developed for densely populated NPP country to mitigate radiological effects in case of SA using SD approach. Besides, this study focuses the weakness of emergency response in Fukushima accident and proposed solution approach. The development of OEPRM in case of SA of NPP is very complex because of the involvement of various organization and it requires highly specialized agencies and technical experts. Moreover, if the country is agriculture based, it will make completely sophisticated.

Developing Off-site Emergency Preparedness and Response Model (OEPRM) for Severe Accident of NPP in a Densely Populated Country Using System Dynamics Approach

International Nuclear Information System (INIS)

Hossena, Muhammed Mufazzal; Kang, Kyoung Ho; Song, Jin Ho

2016-01-01

The main objectives of this study are to find the influencing factors of systems and sub-systems of OEPRM, to find the interdependency among the influencing factors, and to develop a conceptual qualitative OEPRM for densely populated NPP country in case of SA using system dynamics (SD). NPP accidents are classified as nuclear accidents and incidents depending on the severity. Severe accident (SA) is certain low probability accident that are beyond design basis accident which may arise due to multiple failures of safety systems leading to significant core degradation and jeopardize the integrity of many or all of the barriers to the release of radioactive material. The weakness to the off-site emergency response in the time of Fukushima accident was observed. So, it is crucial to develop an off-site emergency preparedness and responses model (OEPRM) for radiological emergency in densely populated country from the Fukushima emergency response lesson. In this study, an OEPRM is developed for densely populated NPP country to mitigate radiological effects in case of SA using SD approach. Besides, this study focuses the weakness of emergency response in Fukushima accident and proposed solution approach. The development of OEPRM in case of SA of NPP is very complex because of the involvement of various organization and it requires highly specialized agencies and technical experts. Moreover, if the country is agriculture based, it will make completely sophisticated

Statistical evaluation of design-error related nuclear reactor accidents

International Nuclear Information System (INIS)

Ott, K.O.; Marchaterre, J.F.

1981-01-01

In this paper, general methodology for the statistical evaluation of design-error related accidents is proposed that can be applied to a variety of systems that evolves during the development of large-scale technologies. The evaluation aims at an estimate of the combined ''residual'' frequency of yet unknown types of accidents ''lurking'' in a certain technological system. A special categorization in incidents and accidents is introduced to define the events that should be jointly analyzed. The resulting formalism is applied to the development of U.S. nuclear power reactor technology, considering serious accidents (category 2 events) that involved, in the accident progression, a particular design inadequacy. 9 refs

Normal Accident at Three Mile Island.

Science.gov (United States)

Perrow, Charles

1981-01-01

Discusses some aspects of the accident at the Three Mile Island nuclear power plant. Explains a number of factors involved including the type of accident, warnings, design and equipment failure, operator error, and negative synergy. Presents alternatives to systems with catastrophic potential. (MK)

Aid system in the attention direction for accidents diagnosis at nuclear power plants based on artificial intelligence

International Nuclear Information System (INIS)

Costa, Rafael Gomes da

2009-01-01

Transient identification in Nuclear Power Plant (NPP) is often a very hard task and may involve a great amount of human cognition. The early identification of unexpected departures from steady state behavior is an essential step for the operation, control and accident management in NPPs. The bases for the transient identification relay on the evidence that different system faults and anomalies lead to different pattern evolution in the involved process variables. During an abnormal event, the operator must monitor a great amount of information from the instruments that represents a specific type of event Several systems based on specialist systems, neural-networks, and fuzzy logic have been developed for transient identification. In the work, we investigate the possibility of using a Neuro Fuzzy modeling tool for efficient transient identification, aiming to helping the operator crew to take decisions relative to the procedure to be followed in situations of accidents/transients at NPPs. The proposed system uses artificial neural networks (ANN) as first level transient diagnostic After the ANN has done the preliminary transient type identification, a fuzzy-logic system analyzes the results emitting reliability degree of it. A preliminary evaluation of the developed system was made at the Human-System Interface Laboratory (LABIHS). The obtained results show that the system can help the operators to take decisions during transients/accidents in the plant (author)

Occurrence and countermeasures of urban power grid accident

Science.gov (United States)

Wei, Wang; Tao, Zhang

2018-03-01

With the advance of technology, the development of network communication and the extensive use of power grids, people can get to know power grid accidents around the world through the network timely. Power grid accidents occur frequently. Large-scale power system blackout and casualty accidents caused by electric shock are also fairly commonplace. All of those accidents have seriously endangered the property and personal safety of the country and people, and the development of society and economy is severely affected by power grid accidents. Through the researches on several typical cases of power grid accidents at home and abroad in recent years and taking these accident cases as the research object, this paper will analyze the three major factors that cause power grid accidents at present. At the same time, combining with various factors and impacts caused by power grid accidents, the paper will put forward corresponding solutions and suggestions to prevent the occurrence of the accident and lower the impact of the accident.

PCTRAN-3: The third generation of personal computer-based plant analyzer for severe accident management

International Nuclear Information System (INIS)

Li-Chi Cliff Po; Link, John M.

2004-01-01

PCTRAN is a plant analyzer that uses a personal computer to simulate plant response. The plant model is recently expanded to accommodate beyond design-basis severe accidents. In the event of multiple failures of the plant safety systems, the core may experience heatup and extensive failure. Using a high-powered personal computer (PC), PCTRAN-3 is designed to operate at a speed significantly faster than real-time. A convenient, interactive and user-friendly graphics interface allows full control by the operator. The plant analyzer is intended for use in severe accident management. In this paper the code's component models and sample runs ranging from normal operational transients to severe accidents are reviewed. (author)

Accident scenario diagnostics with neural networks

International Nuclear Information System (INIS)

Guo, Z.

1992-01-01

Nuclear power plants are very complex systems. The diagnoses of transients or accident conditions is very difficult because a large amount of information, which is often noisy, or intermittent, or even incomplete, need to be processed in real time. To demonstrate their potential application to nuclear power plants, neural networks axe used to monitor the accident scenarios simulated by the training simulator of TVA's Watts Bar Nuclear Power Plant. A self-organization network is used to compress original data to reduce the total number of training patterns. Different accident scenarios are closely related to different key parameters which distinguish one accident scenario from another. Therefore, the accident scenarios can be monitored by a set of small size neural networks, called modular networks, each one of which monitors only one assigned accident scenario, to obtain fast training and recall. Sensitivity analysis is applied to select proper input variables for modular networks

Severe accident approach - final report. Evaluation of design measures for severe accident prevention and consequence mitigation

International Nuclear Information System (INIS)

Tentner, A.M.; Parma, E.; Wei, T.; Wigeland, R.

2010-01-01

An important goal of the US DOE reactor development program is to conceptualize advanced safety design features for a demonstration Sodium Fast Reactor (SFR). The treatment of severe accidents is one of the key safety issues in the design approach for advanced SFR systems. It is necessary to develop an in-depth understanding of the risk of severe accidents for the SFR so that appropriate risk management measures can be implemented early in the design process. This report presents the results of a review of the SFR features and phenomena that directly influence the sequence of events during a postulated severe accident. The report identifies the safety features used or proposed for various SFR designs in the US and worldwide for the prevention and/or mitigation of Core Disruptive Accidents (CDA). The report provides an overview of the current SFR safety approaches and the role of severe accidents. Mutual understanding of these design features and safety approaches is necessary for future collaborations between the US and its international partners as part of the GEN IV program. The report also reviews the basis for an integrated safety approach to severe accidents for the SFR that reflects the safety design knowledge gained in the US during the Advanced Liquid Metal Reactor (ALMR) and Integral Fast Reactor (IFR) programs. This approach relies on inherent reactor and plant safety performance characteristics to provide additional safety margins. The goal of this approach is to prevent development of severe accident conditions, even in the event of initiators with safety system failures previously recognized to lead directly to reactor damage.

Severe accident approach - final report. Evaluation of design measures for severe accident prevention and consequence mitigation.

Energy Technology Data Exchange (ETDEWEB)

Tentner, A. M.; Parma, E.; Wei, T.; Wigeland, R.; Nuclear Engineering Division; SNL; INL

2010-03-01

An important goal of the US DOE reactor development program is to conceptualize advanced safety design features for a demonstration Sodium Fast Reactor (SFR). The treatment of severe accidents is one of the key safety issues in the design approach for advanced SFR systems. It is necessary to develop an in-depth understanding of the risk of severe accidents for the SFR so that appropriate risk management measures can be implemented early in the design process. This report presents the results of a review of the SFR features and phenomena that directly influence the sequence of events during a postulated severe accident. The report identifies the safety features used or proposed for various SFR designs in the US and worldwide for the prevention and/or mitigation of Core Disruptive Accidents (CDA). The report provides an overview of the current SFR safety approaches and the role of severe accidents. Mutual understanding of these design features and safety approaches is necessary for future collaborations between the US and its international partners as part of the GEN IV program. The report also reviews the basis for an integrated safety approach to severe accidents for the SFR that reflects the safety design knowledge gained in the US during the Advanced Liquid Metal Reactor (ALMR) and Integral Fast Reactor (IFR) programs. This approach relies on inherent reactor and plant safety performance characteristics to provide additional safety margins. The goal of this approach is to prevent development of severe accident conditions, even in the event of initiators with safety system failures previously recognized to lead directly to reactor damage.

Application of the severe accident code ATHLET-CD. Modelling and evaluation of accident management measures (Project WASA-BOSS)

Energy Technology Data Exchange (ETDEWEB)

Wilhelm, Polina; Jobst, Matthias; Kliem, Soeren; Kozmenkov, Yaroslav; Schaefer, Frank [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Div. Reactor Safety

2016-07-01

The improvement of the safety of nuclear power plants is a continuously on-going process. The analysis of transients and accidents is an important research topic, which significantly contributes to safety enhancements of existing power plants. In case of an accident with multiple failures of safety systems core uncovery and heat-up can occur. In order to prevent the accident to turn into a severe one or to mitigate the consequences of severe accidents, different accident management measures can be applied. Numerical analyses are used to investigate the accident progression and the complex physical phenomena during the core degradation phase, as well as to evaluate the effectiveness of possible countermeasures in the preventive and mitigative domain [1, 2]. The presented analyses have been performed with the computer code ATHLET-CD developed by GRS [3, 4].

Nuclear Reactor RA Safety Report, Vol. 13, Causes of possible accidents

International Nuclear Information System (INIS)

1986-11-01

This volume includes the analysis of possible accidents on the RA research reaktor. Any unwanted action causing decrease of integrity of any of the reactor safety barriers is considered to be a reactor accident. Safety barriers are: fuel element cladding, reactor vessel, biogical shield, and reactor building. Reactor accidents can be classified in four categories: (1) accidents caused by reactivity changes; (2) accidents caused by mis function of the cooling system; (3) accidents caused by errors in fuel management and auxiliary systems; (4) accidents caused by natural or other external disasters. The analysis of possible causes of reactor accidents includes the analysis of possible impacts on the reactor itself and the environment [sr

Semi-passive pad (post-accident dilution) system combined with recombiners or igniters for e.g., multiple-unit VVER

International Nuclear Information System (INIS)

Eckardt, B.A.

1997-01-01

In order to reduce the risk associated with hypothetical severe nuclear accidents, it has been necessary to develop means for hydrogen control which are capable of handling high H 2 production rates of several m 3 /s. These systems and components should be of simple and, as far as possible, passive design. Moreover, their efficiency must not be affected by the H 2 production scenario. To meet these requirements, Siemens has supplemented its dual process for hydrogen reduction using recombiners and igniters by developing a new process: the semi-passive Post-Accident Dilution (PAD) System. The objective of the work presented in this paper was to design an alternative approach for hydrogen control comprising post-accident CO 2 dilution combined with recombiners or igniters for postulated severe accidents that result in significant hydrogen releases. The combined technique was to keep the dynamic loads arising inside the containment to within a range of only a few millibars, even in the event of transient hydrogen release and distribution processes accompanied by combustion, and was thus to prevent any hazard for safety-related equipment. (author)

Developing a knowledge base for the management of severe accidents

International Nuclear Information System (INIS)

Nelson, W.R.; Jenkins, J.P.

1986-01-01

Prior to the accident at Three Mile Island, little attention was given to the development of procedures for the management of severe accidents, that is, accidents in which the reactor core is damaged. Since TMI, however, significant effort has been devoted to developing strategies for severe accident management. At the same time, the potential application of artificial intelligence techniques, particularly expert systems, to complex decision-making tasks such as accident diagnosis and response has received considerable attention. The need to develop strategies for accident management suggests that a computerized knowledge base such as used by an expert system could be developed to collect and organize knowledge for severe accident management. This paper suggests a general method which could be used to develop such a knowledge base, and how it could be used to enhance accident management capabilities

NPP Krsko Severe Accident Management Guidelines Upgrade

International Nuclear Information System (INIS)

Mihalina, Mario; Spalj, Srdjan; Glaser, Bruno; Jalovec, Robi; Jankovic, Gordan

2014-01-01

Nuclear Power Plant Krsko (NEK) has decided to take steps for upgrade of safety measures to prevent severe accidents, and to improve the means to successfully mitigate their consequences. The content of the program for the NEK Safety Upgrade is consistent with the nuclear industry response to Fukushima accident, which revealed many new insights into severe accidents. Therefore, new strategies and usage of new systems and components should be integrated into current NEK Severe Accident Management Guidelines (SAMG's). SAMG's are developed to arrest the progression of a core damage accident and to limit the extent of resulting releases of fission products. NEK new SAMG's revision major changes are made due to: replacement of Electrical Recombiners by Passive Autocatalytic Recombiners (PARs) and the installation of Passive Containment Filtered Vent System (PCFV); to handle a fuel damage situation in Spent Fuel Pool (SFP) and to assess risk of core damage situation during shutdown operation. (authors)

The reactor accident of Chernobyl

International Nuclear Information System (INIS)

Koenig, L.A.; Schuettelkopf, H.; Erat, S.; Fessler, H.; Hempelmann, S.; Maurer, K.; Pimpl, M.; Radziwill, A.

1986-08-01

The contamination, caused by the radioactivity released during the reactor accident of Chernobyl was measured in samples taken in the environment of the Karlsruhe Nuclear Research Center. The radioactivity was determined in air, fodder, milk, vegetables, other plants, foodstuffs, soil, precipitations, drinking water, sludge and other samples. Results of measurements are reported which were received with considerably more than 1000 samples. The evaluation of the data will be presented in KfK 4140. (orig.) [de

Industrial accidents triggered by lightning.

Science.gov (United States)

Renni, Elisabetta; Krausmann, Elisabeth; Cozzani, Valerio

2010-12-15

Natural disasters can cause major accidents in chemical facilities where they can lead to the release of hazardous materials which in turn can result in fires, explosions or toxic dispersion. Lightning strikes are the most frequent cause of major accidents triggered by natural events. In order to contribute towards the development of a quantitative approach for assessing lightning risk at industrial facilities, lightning-triggered accident case histories were retrieved from the major industrial accident databases and analysed to extract information on types of vulnerable equipment, failure dynamics and damage states, as well as on the final consequences of the event. The most vulnerable category of equipment is storage tanks. Lightning damage is incurred by immediate ignition, electrical and electronic systems failure or structural damage with subsequent release. Toxic releases and tank fires tend to be the most common scenarios associated with lightning strikes. Oil, diesel and gasoline are the substances most frequently released during lightning-triggered Natech accidents. Copyright © 2010 Elsevier B.V. All rights reserved.

Surveillance of Strontium-90 in Foods after the Fukushima Daiichi Nuclear Power Plant Accident.

Science.gov (United States)

Nabeshi, Hiromi; Tsutsumi, Tomoaki; Uekusa, Yoshinori; Hachisuka, Akiko; Matsuda, Rieko; Teshima, Reiko

2015-01-01

As a result of the Fukushima Daiichi nuclear power plant (NPP) accident, various radionuclides were released into the environment. In this study, we surveyed strontium-90 ((90)Sr) concentrations in several foodstuffs. Strontium-90 is thought to be the third most important residual radionuclide in food collected after the Fukushima Daiichi, NPP accident after following cesium-137 ((137)Cs) and cesium-134 ((134)Cs). Results of (90)Sr analyses indicated that (90)Sr was detect in 25 of the 40 radioactive cesium (r-Cs) positive samples collected in areas around the Fukushima Daiichi NPP, ranging in distance from 50 to 250 km. R-Cs positive samples were defined as containing both (134)Cs and (137)Cs which are considered to be indicators of the after-effects of the Fukushima Daiichi NPP accident. We also detected (90)Sr in 8 of 13 r-Cs negative samples, in which (134)Cs was not detected. Strontium-90 concentrations in the r-Cs positive samples did not significantly exceed the (90)Sr concentrations in r-Cs negative samples or the (90)Sr concentration ranges in comparable food groups found in previous surveys before the Fukushima Daiichi NPP accident. Thus, (90)Sr concentrations in r-Cs positive samples were indistinguishable from the background (90)Sr concentrations arising from global fallout prior to the Fukushima accident, suggesting that no marked increase of (90)Sr concentrations has occurred in r-Cs positive samples as a result of the Fukushima Daiichi NPP accident.

Accident management insights after the Fukushima Daiichi NPP accident

International Nuclear Information System (INIS)

Degueldre, Didier; Viktorov, Alexandre; Tuomainen, Minna; Ducamp, Francois; Chevalier, Sophie; Guigueno, Yves; Tasset, Daniel; Heinrich, Marcus; Schneider, Matthias; Funahashi, Toshihiro; Hotta, Akitoshi; Kajimoto, Mitsuhiro; Chung, Dae-Wook; Kuriene, Laima; Kozlova, Nadezhda; Zivko, Tomi; Aleza, Santiago; Jones, John; McHale, Jack; Nieh, Ho; Pascal, Ghislain; ); Nakoski, John; Neretin, Victor; Nezuka, Takayoshi; )

2014-01-01

The Fukushima Daiichi nuclear power plant (NPP) accident, that took place on 11 March 2011, initiated a significant number of activities at the national and international levels to reassess the safety of existing NPPs, evaluate the sufficiency of technical means and administrative measures available for emergency response, and develop recommendations for increasing the robustness of NPPs to withstand extreme external events and beyond design basis accidents. The OECD Nuclear Energy Agency (NEA) is working closely with its member and partner countries to examine the causes of the accident and to identify lessons learnt with a view to the appropriate follow-up actions to be taken by the nuclear safety community. Accident management is a priority area of work for the NEA to address lessons being learnt from the accident at the Fukushima Daiichi NPP following the recommendations of Committee on Nuclear Regulatory Activities (CNRA), Committee on the Safety of Nuclear Installations (CSNI), and Committee on Radiation Protection and Public Health (CRPPH). Considering the importance of these issues, the CNRA authorised the formation of a task group on accident management (TGAM) in June 2012 to review the regulatory framework for accident management following the Fukushima Daiichi NPP accident. The task group was requested to assess the NEA member countries needs and challenges in light of the accident from a regulatory point of view. The general objectives of the TGAM review were to consider: - enhancements of on-site accident management procedures and guidelines based on lessons learnt from the Fukushima Daiichi NPP accident; - decision-making and guiding principles in emergency situations; - guidance for instrumentation, equipment and supplies for addressing long-term aspects of accident management; - guidance and implementation when taking extreme measures for accident management. The report is built on the existing bases for capabilities to respond to design basis

MELCOR Accident Consequence Code System (MACCS)

International Nuclear Information System (INIS)

Rollstin, J.A.; Chanin, D.I.; Jow, H.N.

1990-02-01

This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previously used CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projections, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. Volume I, the User's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems. Volume II, the Model Description, describes the underlying models that are implemented in the code, and Volume III, the Programmer's Reference Manual, describes the code's structure and database management

MELCOR Accident Consequence Code System (MACCS)

Energy Technology Data Exchange (ETDEWEB)

Jow, H.N.; Sprung, J.L.; Ritchie, L.T. (Sandia National Labs., Albuquerque, NM (USA)); Rollstin, J.A. (GRAM, Inc., Albuquerque, NM (USA)); Chanin, D.I. (Technadyne Engineering Consultants, Inc., Albuquerque, NM (USA))

1990-02-01

This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previously used CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. Volume I, the User's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems. Volume II, the Model Description, describes the underlying models that are implemented in the code, and Volume III, the Programmer's Reference Manual, describes the code's structure and database management. 59 refs., 14 figs., 15 tabs.

MELCOR Accident Consequence Code System (MACCS)

International Nuclear Information System (INIS)

Jow, H.N.; Sprung, J.L.; Ritchie, L.T.; Rollstin, J.A.; Chanin, D.I.

1990-02-01

This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previously used CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. Volume I, the User's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems. Volume II, the Model Description, describes the underlying models that are implemented in the code, and Volume III, the Programmer's Reference Manual, describes the code's structure and database management. 59 refs., 14 figs., 15 tabs

Radioactivity control after Fukushima accident

International Nuclear Information System (INIS)

Vukovic, D.; Mitrovic, R.; Vicentijevic, M.; Pantelic, G.

2011-01-01

Fukushima nuclear accident has influence on more attention when radioactivity of fish were controlled. Sea fish, freshwater fish, fish products and fish flour were analysed ( 95 samples). All products were safe for use with radiation-hygienic aspects. [sr

Causal Analysis to a Subway Accident: A Comparison of STAMP and RAIB

Directory of Open Access Journals (Sweden)

Zhou Yao

2018-01-01

Full Text Available Accident investigation and analysis after the accident, vital to prevent the occurrence of similar accident and improve the safety of the system. Different methods led to a different understanding of the accident. In this paper, a subway accident was analysed with a systemic accident analysis model – STAMP (System-Theoretic Accident Modelling and Processes. The hierarchical safety control structure was obtained, and the system-level safety constraints were obtained, controllers of the physical layer were analysed one by one, and put forward the relevant safety requirements and constraints, the dynamic analysis of the structure of the safety control is carried out, and the targeted recommendations are pointed out. In comparison with the analysis results obtained by the Rail Accident Investigation Branch (RAIB. Some useful findings have been concluded. STAMP treats safety as a control problem and reduces or eliminates causes of the accident from the controlling perspective. Whereas RAIB obtains causes of the accident by analysing the sequence of events related to the accident and reasons of these events, then chooses one(or moreevent(s as the immediate cause and some of the key events as causal factors. RAIB analysis is based on the sequential event models, but STAMP analysis provides us with a holistic, dynamic way to control system to maintain safety.

Detailed deposition density maps constructed by large-scale soil sampling for gamma-ray emitting radioactive nuclides from the Fukushima Dai-ichi Nuclear Power Plant accident.

Science.gov (United States)

Saito, Kimiaki; Tanihata, Isao; Fujiwara, Mamoru; Saito, Takashi; Shimoura, Susumu; Otsuka, Takaharu; Onda, Yuichi; Hoshi, Masaharu; Ikeuchi, Yoshihiro; Takahashi, Fumiaki; Kinouchi, Nobuyuki; Saegusa, Jun; Seki, Akiyuki; Takemiya, Hiroshi; Shibata, Tokushi

2015-01-01

Soil deposition density maps of gamma-ray emitting radioactive nuclides from the Fukushima Dai-ichi Nuclear Power Plant (NPP) accident were constructed on the basis of results from large-scale soil sampling. In total 10,915 soil samples were collected at 2168 locations. Gamma rays emitted from the samples were measured by Ge detectors and analyzed using a reliable unified method. The determined radioactivity was corrected to that of June 14, 2011 by considering the intrinsic decay constant of each nuclide. Finally the deposition maps were created for (134)Cs, (137)Cs, (131)I, (129m)Te and (110m)Ag. The radioactivity ratio of (134)Cs-(137)Cs was almost constant at 0.91 regardless of the locations of soil sampling. The radioactivity ratios of (131)I and (129m)Te-(137)Cs were relatively high in the regions south of the Fukushima NPP site. Effective doses for 50 y after the accident were evaluated for external and inhalation exposures due to the observed radioactive nuclides. The radiation doses from radioactive cesium were found to be much higher than those from the other radioactive nuclides. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Diagnostic and prognostic system for identification of accident scenarios and prediction of 'source term' in nuclear power plants under accident conditions

International Nuclear Information System (INIS)

Santhosh; Gera, B.; Kumar, Mithilesh

2014-01-01

Nuclear power plant experiences a number of transients during its operations. These transients may be due to equipment failure, malfunctioning of process support systems etc. In such a situation, the plant may result in an abnormal state which is undesired. In case of such an undesired plant condition, the operator has to carry out diagnostic and corrective actions. When an event occurs starting from the steady state operation, instruments' readings develop a time dependent pattern and these patterns are unique with respect to the type of the particular event. Therefore, by properly selecting the plant process parameters, the transients can be distinguished. In this connection, a computer based tool known as Diagnostic and Prognostic System has been developed for identification of large pipe break scenarios in 220 MWe Pressurised Heavy Water Reactors (PHWRs) and for prediction of expected 'Source Term' and consequence for a situation where Emergency Core Cooling System (ECCS) is not available or partially available. Diagnostic and Prognostic System is essentially a transient identification and expected source term forecasting system. The system is based on Artificial Neural Networks (ANNs) that continuously monitors the plant conditions and identifies a Loss Of Coolant Accident (LOCA) scenario quickly based on the reactor process parameter values. The system further identifies the availability of injection of ECCS and in case non-availability of ECCS, it can forecast expected 'Source Term'. The system is a support to plant operators as well as for emergency preparedness. The ANN is trained with a process parameter database pertaining to accident conditions and tested against blind exercises. In order to see the feasibility of implementing in the plant for real-time diagnosis, this system has been set up on a high speed computing facility and has been demonstrated successfully for LOCA scenarios. (author)

State of reproductive system glands in males participated in the Chernobyl accident response

International Nuclear Information System (INIS)

Evdokimov, V.V.; Erasova, V.I.; Demin, A.I.; Dubinina, E.B.; Lyubchenko, P.N.

1993-01-01

State of reproductive system glands in males participated in the Chernobyl accident response and exposed to external irradiation at the dose up to 25 cGy was studied. 164 men at the age of 22-50 y.o. were examinated. Percentages of the various reproductive disorders were presented

HANARO thermal hydraulic accident analysis

Energy Technology Data Exchange (ETDEWEB)

Park, Chul; Kim, Heon Il; Lee, Bo Yook; Lee, Sang Yong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1996-06-01

For the safety assessment of HANARO, accident analyses for the anticipated operational transients, accident scenarios and limiting accident scenarios were conducted. To do this, the commercial nuclear reactor system code. RELAP5/MOD2 was modified to RELAP5/KMRR; the thermal hydraulic correlations and the heat exchanger model was changed to incorporate HANARO characteristics. This report summarizes the RELAP/KMRR calculation results and the subchannel analyses results based on the RELAP/KMRR results. During the calculation, major concern was placed on the integrity of the fuel. For all the scenarios, the important accident analysis parameters, i.e., fuel centerline temperatures and the minimum critical heat flux ratio(MCHFR), satisfied safe design limits. It was verified, therefore, that the HANARO was safely designed. 21 tabs., 89 figs., 39 refs. (Author) .new.

Process criticality accident likelihoods, consequences, and emergency planning

Energy Technology Data Exchange (ETDEWEB)

McLaughlin, T.P.

1991-01-01

Evaluation of criticality accident risks in the processing of significant quantities of fissile materials is both complex and subjective, largely due to the lack of accident statistics. Thus, complying with standards such as ISO 7753 which mandates that the need for an alarm system be evaluated, is also subjective. A review of guidance found in the literature on potential accident magnitudes is presented for different material forms and arrangements. Reasoned arguments are also presented concerning accident prevention and accident likelihoods for these material forms and arrangements. 13 refs., 1 fig., 1 tab.

Accidents in nuclear ships

Energy Technology Data Exchange (ETDEWEB)

Oelgaard, P L [Risoe National Lab., Roskilde (Denmark); [Technical Univ. of Denmark, Lyngby (Denmark)

1996-12-01

This report starts with a discussion of the types of nuclear vessels accidents, in particular accidents which involve the nuclear propulsion systems. Next available information on 61 reported nuclear ship events in considered. Of these 6 deals with U.S. ships, 54 with USSR ships and 1 with a French ship. The ships are in almost all cases nuclear submarines. Only events that involve the sinking of vessels, the nuclear propulsion plants, radiation exposures, fires/explosions, sea-water leaks into the submarines and sinking of vessels are considered. For each event a summary of available information is presented, and comments are added. In some cases the available information is not credible, and these events are neglected. This reduces the number of events to 5 U.S. events, 35 USSR/Russian events and 1 French event. A comparison is made between the reported Soviet accidents and information available on dumped and damaged Soviet naval reactors. It seems possible to obtain good correlation between the two types of events. An analysis is made of the accident and estimates are made of the accident probabilities which are found to be of the order of 10{sup -3} per ship reactor years. It if finally pointed out that the consequences of nuclear ship accidents are fairly local and does in no way not approach the magnitude of the Chernobyl accident. It is emphasized that some of the information on which this report is based, may not be correct. Consequently some of the results of the assessments made may not be correct. (au).

Accidents in nuclear ships

International Nuclear Information System (INIS)

Oelgaard, P.L.

1996-12-01

This report starts with a discussion of the types of nuclear vessels accidents, in particular accidents which involve the nuclear propulsion systems. Next available information on 61 reported nuclear ship events in considered. Of these 6 deals with U.S. ships, 54 with USSR ships and 1 with a French ship. The ships are in almost all cases nuclear submarines. Only events that involve the sinking of vessels, the nuclear propulsion plants, radiation exposures, fires/explosions, sea-water leaks into the submarines and sinking of vessels are considered. For each event a summary of available information is presented, and comments are added. In some cases the available information is not credible, and these events are neglected. This reduces the number of events to 5 U.S. events, 35 USSR/Russian events and 1 French event. A comparison is made between the reported Soviet accidents and information available on dumped and damaged Soviet naval reactors. It seems possible to obtain good correlation between the two types of events. An analysis is made of the accident and estimates are made of the accident probabilities which are found to be of the order of 10 -3 per ship reactor years. It if finally pointed out that the consequences of nuclear ship accidents are fairly local and does in no way not approach the magnitude of the Chernobyl accident. It is emphasized that some of the information on which this report is based, may not be correct. Consequently some of the results of the assessments made may not be correct. (au)