WorldWideScience

Sample records for accident investigations phase

  1. Investigations of Human and Organizational Factors in hazardous vapor accidents

    International Nuclear Information System (INIS)

    Wang Yanfu; Faghih Roohi, Shahrzad; Hu Xiuming; Xie Min

    2011-01-01

    Highlights: → HFACS provides a systematic guideline in accident investigations. The hierarchal structure of HFACS forces investigators to seek out latent HOFs. → Bayesian Network enhances the ability of the HFACS by allowing experts to quantify the degree of relationships among the HOFs. → The fuzzy AHP helps to reduce the subjective biases by avoiding the need to give explicit probability values for the variables' states. - Abstract: This paper presents a model to assess the contribution of Human and Organizational Factor (HOF) to accidents. The proposed model is made up of two phases. The first phase is the qualitative analysis of HOF responsible for accidents, which utilizes Human Factors Analysis and Classification System (HFACS) to seek out latent HOFs. The hierarchy of HOFs identified in the first phase provides inputs for the analysis in the second phase, which is a quantitative analysis using Bayesian Network (BN). BN enhances the ability of HFACS by allowing investigators or domain experts to measure the degree of relationships among the HOFs. In order to estimate the conditional probabilities of BN, fuzzy analytical hierarchy process and decomposition method are applied in the model. Case studies show that the model is capable of seeking out critical latent human and organizational errors and carrying out quantitative analysis of accidents. Thereafter, corresponding safety prevention measures are derived.

  2. Supervisor's accident investigation handbook

    International Nuclear Information System (INIS)

    1980-02-01

    This pamphlet was prepared by the Environmental Health and Safety Department (EH and S) of Lawrence Berkeley Laboratory (LBL) to provide LBL supervisors with a handy reference to LBL's accident investigation program. The publication supplements the Accident and Emergencies section of LBL's Regulations and Procedures Manual, Pub. 201. The present guide discusses only accidents that are to be investigated by the supervisor. These accidents are classified as Type C by the Department of Energy (DOE) and include most occupational injuries and illnesses, government motor-vehicle accidents, and property damages of less than $50,000

  3. Credible investigation of air accidents

    International Nuclear Information System (INIS)

    Smart, K.

    2004-01-01

    Within the United Kingdom the Air Accidents Investigation Branch (AAIB) has been used as a model for the other transport modes accident investigation bodies. Government Ministers considered that the AAIB's approach had established the trust of the public and the aviation industry in its ability to conduct independent and objective investigations. The paper will examine the factors that are involved in establishing this trust. They include: the investigation framework; the actual and perceived independence of the accident investigating body; the aviation industry's safety culture; the qualities of the investigators and the quality of their liaison with bereaved families those directly affected by the accidents they investigate

  4. Investigating accidents involving aircraft manufactured from polymer composite materials

    Science.gov (United States)

    Dunn, Leigh

    This study looks into the examination of polymer composite wreckage from the perspective of the aircraft accident investigator. It develops an understanding of the process of wreckage examination as well as identifying the potential for visual and macroscopic interpretation of polymer composite aircraft wreckage. The in-field examination of aircraft wreckage, and subsequent interpretations of material failures, can be a significant part of an aircraft accident investigation. As the use of composite materials in aircraft construction increases, the understanding of how macroscopic failure characteristics of composite materials may aid the field investigator is becoming of increasing importance.. The first phase of this research project was to explore how investigation practitioners conduct wreckage examinations. Four accident investigation case studies were examined. The analysis of the case studies provided a framework of the wreckage examination process. Subsequently, a literature survey was conducted to establish the current level of knowledge on the visual and macroscopic interpretation of polymer composite failures. Relevant literature was identified and a compendium of visual and macroscopic characteristics was created. Two full-scale polymer composite wing structures were loaded statically, in an upward bending direction, until each wing structure fractured and separated. The wing structures were subsequently examined for the existence of failure characteristics. The examination revealed that whilst characteristics were present, the fragmentation of the structure destroyed valuable evidence. A hypothetical accident scenario utilising the fractured wing structures was developed, which UK government accident investigators subsequently investigated. This provided refinement to the investigative framework and suggested further guidance on the interpretation of polymer composite failures by accident investigators..

  5. French policy for managing the post-accident phase of a nuclear accident.

    Science.gov (United States)

    Gallay, F; Godet, J L; Niel, J C

    2015-06-01

    In 2005, at the request of the French Government, the Nuclear Safety Authority (ASN) established a Steering Committee for the Management of the Post-Accident Phase of a Nuclear Accident or a Radiological Emergency, with the objective of establishing a policy framework. Under the supervision of ASN, this Committee, involving several tens of experts from different backgrounds (e.g. relevant ministerial offices, expert agencies, local information commissions around nuclear installations, non-governmental organisations, elected officials, licensees, and international experts), developed a number of recommendations over a 7-year period. First published in November 2012, these recommendations cover the immediate post-emergency situation, and the transition and longer-term periods of the post-accident phase in the case of medium-scale nuclear accidents causing short-term radioactive release (less than 24 h) that might occur at French nuclear facilities. They also apply to actions to be undertaken in the event of accidents during the transportation of radioactive materials. These recommendations are an important first step in preparation for the management of a post-accident situation in France in the case of a nuclear accident. © The Chartered Institution of Building Services Engineers 2014.

  6. Review of the TMI-2 accident evaluation and vessel investigation projects

    Energy Technology Data Exchange (ETDEWEB)

    Ladekarl Thomsen, Knud

    1998-03-01

    The results of the TMI-2 Accident Evaluation Programme and the Vessel Investigation Project have been reviewed as part of a literature study on core meltdown and in-vessel coolability. The emphasis is placed on the late phase melt progression, which is of special relevance to the NKS-sponsored RAK-2.1 project on Severe Accident Phenomenology. The body of the report comprises three main sections, The TMI-2 Accident Scenario, Core Region and Relocation Path Investigations, and Lower Head Investigations. In the final discussion, the lower head gap formation mechanism is explained in terms of thermal contraction and fracturing of the debris crust. This model seems more plausible than the MAAP model based on creep expansion of the lower head. (au) 1 tab., 33 ills., 31 refs.

  7. Human Factors in Cabin Accident Investigations

    Science.gov (United States)

    Chute, Rebecca D.; Rosekind, Mark R. (Technical Monitor)

    1996-01-01

    Human factors has become an integral part of the accident investigation protocol. However, much of the investigative process remains focussed on the flight deck, airframe, and power plant systems. As a consequence, little data has been collected regarding the human factors issues within and involving the cabin during an accident. Therefore, the possibility exists that contributing factors that lie within that domain may be overlooked. The FAA Office of Accident Investigation is sponsoring a two-day workshop on cabin safety accident investigation. This course, within the workshop, will be of two hours duration and will explore relevant areas of human factors research. Specifically, the three areas of discussion are: Information transfer and resource management, fatigue and other physical stressors, and the human/machine interface. Integration of these areas will be accomplished by providing a suggested checklist of specific cabin-related human factors questions for investigators to probe following an accident.

  8. 32 CFR 634.29 - Traffic accident investigation reports.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Traffic accident investigation reports. 634.29... records. Installation law enforcement officials will record traffic accident investigations on Service/DLA... traffic accident investigation reports pertaining to accidents investigated by military police that...

  9. Additional investigations on the consequences of accidents

    International Nuclear Information System (INIS)

    Ehrhardt, J.; Bayer, A.; Burkart, K.

    1982-01-01

    As a first step to improve the accident consequence model of the German Risk Study within the Phase B, additional investigations on special problems and questions were performed. In detail attention is given to the following topics: emergency protective actions in the vicinity of the site; latent cancer fatalities - allocated to the population living during the nuclear accident and to persons born afterwards, within and beyond a distance of 540 km from the site, caused by radiation doses below the dose limits of the German radiation protection regulations estimated assuming a nonlinear dose response function; risk assessments of nuclear power plants with lower capacities; loss of life expectancy after accidental radiation exposure. All results are presented separately for the 8 release categories of the German Risk Study. (orig.) [de

  10. Biomass accident investigations – missed opportunities for learning and accident prevention

    DEFF Research Database (Denmark)

    Hedlund, Frank Huess

    2017-01-01

    The past decade has seen a major increase in the production of energy from biomass. The growth has been mirrored in an increase of serious biomass related accidents involving fires, gas explosions, combustible dust explosions and the release of toxic gasses. There are indications that the number...... of bioenergy related accidents is growing faster than the energy production. This paper argues that biomass accidents, if properly investigated and lessons shared widely, provide ample opportunities for improving general hazard awareness and safety performance of the biomass industry. The paper examines...... selected serious accidents involving biogas and wood pellets in Denmark and argues that such opportunities for learning were missed because accident investigations were superficial, follow-up incomplete and information sharing absent. In one particularly distressing case, a facility saw a repeat accident...

  11. 29 CFR 1960.29 - Accident investigation.

    Science.gov (United States)

    2010-07-01

    ... reflective of the seriousness of the accident. (b) In any case, each accident which results in a fatality or... evidence uncovered during accident investigations which would be of benefit in developing a new OSHA...

  12. 32 CFR 636.13 - Traffic accident investigation reports.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Traffic accident investigation reports. 636.13... Stewart, Georgia § 636.13 Traffic accident investigation reports. In addition to the requirements in § 634... record traffic accident investigations on DA Form 3946 (Military Police Traffic Accident Report) and DA...

  13. Application of forensic image analysis in accident investigations.

    Science.gov (United States)

    Verolme, Ellen; Mieremet, Arjan

    2017-09-01

    Forensic investigations are primarily meant to obtain objective answers that can be used for criminal prosecution. Accident analyses are usually performed to learn from incidents and to prevent similar events from occurring in the future. Although the primary goal may be different, the steps in which information is gathered, interpreted and weighed are similar in both types of investigations, implying that forensic techniques can be of use in accident investigations as well. The use in accident investigations usually means that more information can be obtained from the available information than when used in criminal investigations, since the latter require a higher evidence level. In this paper, we demonstrate the applicability of forensic techniques for accident investigations by presenting a number of cases from one specific field of expertise: image analysis. With the rapid spread of digital devices and new media, a wealth of image material and other digital information has become available for accident investigators. We show that much information can be distilled from footage by using forensic image analysis techniques. These applications show that image analysis provides information that is crucial for obtaining the sequence of events and the two- and three-dimensional geometry of an accident. Since accident investigation focuses primarily on learning from accidents and prevention of future accidents, and less on the blame that is crucial for criminal investigations, the field of application of these forensic tools may be broader than would be the case in purely legal sense. This is an important notion for future accident investigations. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Traffic accidents: an econometric investigation

    OpenAIRE

    Tito Moreira; Adolfo Sachsida; Loureiro Paulo

    2004-01-01

    Based on a sample of drivers in Brasilia's streets, this article investigates whether distraction explains traffic accidents. A probit model is estimated to determine the predictive power of several variables on traffic accidents. The main conclusion drawn from this study is that the proxies used to measure distraction, such as the use of cell phones and cigarette smoking in a moving vehicle, are significant factors in determining traffic accidents.

  15. 32 CFR 634.28 - Traffic accident investigation.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Traffic accident investigation. 634.28 Section... ENFORCEMENT AND CRIMINAL INVESTIGATIONS MOTOR VEHICLE TRAFFIC SUPERVISION Traffic Supervision § 634.28 Traffic accident investigation. Installation law enforcement personnel must make detailed investigations of...

  16. Deepwater Horizon Accident Investigation Report

    International Nuclear Information System (INIS)

    2010-09-01

    On the evening of April 20, 2010, a well control event allowed hydrocarbons to escape from the Macondo well onto Transocean's Deepwater Horizon, resulting in explosions and fire on the rig. Eleven people lost their lives, and 17 others were injured. The fire, which was fed by hydrocarbons from the well, continued for 36 hours until the rig sank. Hydrocarbons continued to flow from the reservoir through the wellbore and the blowout preventer (BOP) for 87 days, causing a spill of national significance. BP Exploration and Production Inc. was the lease operator of Mississippi Canyon Block 252, which contains the Macondo well. BP formed an investigation team that was charged with gathering the facts surrounding the accident, analyzing available information to identify possible causes and making recommendations to enable prevention of similar accidents in the future. The BP investigation team began its work immediately in the aftermath of the accident, working independently from other BP spill response activities and organizations. The ability to gather information was limited by a scarcity of physical evidence and restricted access to potentially relevant witnesses. The team had access to partial real-time data from the rig, documents from various aspects of the Macondo well's development and construction, witness interviews and testimony from public hearings. The team used the information that was made available by other companies, including Transocean, Halliburton and Cameron. Over the course of the investigation, the team involved over 50 internal and external specialists from a variety of fields: safety, operations, subsea, drilling, well control, cementing, well flow dynamic modeling, BOP systems and process hazard analysis. This report presents an analysis of the events leading up to the accident, eight key findings related to the causal chain of events and recommendations to enable the prevention of a similar accident. The investigation team worked separately

  17. Deepwater Horizon Accident Investigation Report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-09-15

    On the evening of April 20, 2010, a well control event allowed hydrocarbons to escape from the Macondo well onto Transocean's Deepwater Horizon, resulting in explosions and fire on the rig. Eleven people lost their lives, and 17 others were injured. The fire, which was fed by hydrocarbons from the well, continued for 36 hours until the rig sank. Hydrocarbons continued to flow from the reservoir through the wellbore and the blowout preventer (BOP) for 87 days, causing a spill of national significance. BP Exploration and Production Inc. was the lease operator of Mississippi Canyon Block 252, which contains the Macondo well. BP formed an investigation team that was charged with gathering the facts surrounding the accident, analyzing available information to identify possible causes and making recommendations to enable prevention of similar accidents in the future. The BP investigation team began its work immediately in the aftermath of the accident, working independently from other BP spill response activities and organizations. The ability to gather information was limited by a scarcity of physical evidence and restricted access to potentially relevant witnesses. The team had access to partial real-time data from the rig, documents from various aspects of the Macondo well's development and construction, witness interviews and testimony from public hearings. The team used the information that was made available by other companies, including Transocean, Halliburton and Cameron. Over the course of the investigation, the team involved over 50 internal and external specialists from a variety of fields: safety, operations, subsea, drilling, well control, cementing, well flow dynamic modeling, BOP systems and process hazard analysis. This report presents an analysis of the events leading up to the accident, eight key findings related to the causal chain of events and recommendations to enable the prevention of a similar accident. The investigation team worked

  18. Accident Journalism and Traffic Safety Education: A Three-Phase Investigation of Accident Reporting in the Canadian Daily Press.

    Science.gov (United States)

    Wilde, Gerald J. S.; Ackersviller, Melody J.

    A study examined the potential for development of a traffic accident-reporting form in the Canadian daily press that strengthens concern for road safety in the general population and enhances knowledge, attitudes, and behavior leading to greater safety. The investigation was conducted on three levels: a content analysis, a readership analysis, and…

  19. Investigation on accident management measures for VVER-1000 reactors

    International Nuclear Information System (INIS)

    Tusheva, P.; Schaefer, F.; Rohde, U.; Reinke, N.

    2009-01-01

    A consequence of a total loss of AC power supply (station blackout) leading to unavailability of major active safety systems which could not perform their safety functions is that the safety criteria ensuring a secure operation of the nuclear power plant would be violated and a consequent core heat-up with possible core degradation would occur. Currently, a study which examines the thermal-hydraulic behaviour of the plant during the early phase of the scenario is being performed. This paper focuses on the possibilities for delay or mitigation of the accident sequence to progress into a severe one by applying Accident Management Measures (AMM). The strategy 'Primary circuit depressurization' as a basic strategy, which is realized in the management of severe accidents is being investigated. By reducing the load over the vessel under severe accident conditions, prerequisites for maintaining the integrity of the primary circuit are being created. The time-margins for operators' intervention as key issues are being also assessed. The task is accomplished by applying the GRS thermal-hydraulic system code ATHLET. In addition, a comparative analysis of the accident progression for a station blackout event for both a reference German PWR and a reference VVER-1000, taking into account the plant specifics, is being performed. (authors)

  20. 32 CFR 636.12 - Traffic accident investigation.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Traffic accident investigation. 636.12 Section... ENFORCEMENT AND CRIMINAL INVESTIGATIONS MOTOR VEHICLE TRAFFIC SUPERVISION (SPECIFIC INSTALLATIONS) Fort Stewart, Georgia § 636.12 Traffic accident investigation. In addition to the requirements in § 634.28 of...

  1. A Tool for Safety Officers Investigating " simple" Accidents

    DEFF Research Database (Denmark)

    Jørgensen, Kirsten

    2010-01-01

    Most workplace accidents that happen in enterprises are simple and seldom result in serious injuries. Very often these kinds of workplace accidents are not investigated, and if they are, then the investigation is very brief, with comments such as that it was the victim’s own fault or just...... accidents normally caused by apparent banalities occur much more frequently and with a higher rate of fatalities, disablements and other serious injuries than the ostensibly most dangerous kinds of accidents. In 1999 a practical tool for use by safety officers was developed; this tool is based...... on the investigation methods applied in major accidents, but comprises a simpler and more user-friendly presentation. The tool involves three steps: Mapping the facts, analysing the events, and developing preventive solutions. Practical application of the tool has shown that it affords managers and workers...

  2. Phased Development of Accident Tolerant Fue

    Energy Technology Data Exchange (ETDEWEB)

    Bragg-Sitton, Shannon M.; Carmack, W. Jon

    2016-09-01

    The United States Department of Energy (U.S. DOE) Advanced Fuels Campaign (AFC) has adopted a three-phase approach for the development and eventual commercialization of enhanced, accident tolerant fuel (ATF) for light water reactors (LWRs). Extending from 2012 to 2016, AFC is currently coming to the end of Phase 1 research that has entailed Feasibility Assessment and Prioritization for a large number of proposed fuel systems (fuel and cladding) that could provide improved performance under accident conditions. Phase 1 activities will culminate with a prioritization of concepts for both near-term and long-term development based on the available experimental data and modeling predictions. This process will provide guidance to DOE on what concepts should be prioritized for investment in Phase 2 Development/Qualification activities based on technical performance improvements and probability of meeting the aggressive schedule to insert a lead fuel rod (LFR) in a commercial power reactor by 2022. While Phase 1 activities include small-scale fabrication work, materials characterization, and limited irradiation of samples, Phase 2 will require development teams to expand to industrial fabrication methods, conduct irradiation tests under more prototypic reactor conditions (i.e. in contact with reactor primary coolant at LWR conditions and in-pile transient testing), conduct additional characterization and post-irradiation examination, and develop a fuel performance code for the candidate ATF. Phase 2 will culminate in the insertion of an LFR (or lead fuel assembly) in a commercial power reactor. The Phase 3 Commercialization work will extend past 2022. Following post-irradiation examination of LFRs, partial-core reloads will be demonstrated. The commercialization phase will further entail the establishment of commercial fabrication capabilities and the transition of LWR cores to the new fuel. The three development phases described roughly correspond to the technology

  3. Multidisciplinary accident investigation : volume 1

    Science.gov (United States)

    1976-09-01

    The final report of the Multidisciplinary Accident Investigation Team of the Maryland Medical-Legal Foundation, Inc. is presented. The report describes the methodology, results, discussions, conclusions and recommendations pertaining to the investiga...

  4. Aircraft accident investigation: the decision-making in initial action scenario.

    Science.gov (United States)

    Barreto, Marcia M; Ribeiro, Selma L O

    2012-01-01

    In the complex aeronautical environment, the efforts in terms of operational safety involve the adoption of proactive and reactive measures. The process of investigation begins right after the occurrence of the aeronautical accident, through the initial action. Thus, it is in the crisis scenario, that the person responsible for the initial action makes decisions and gathers the necessary information for the subsequent phases of the investigation process. Within this scenario, which is a natural environment, researches have shown the fragility of rational models of decision making. The theoretical perspective of naturalistic decision making constitutes a breakthrough in the understanding of decision problems demanded by real world. The proposal of this study was to verify if the initial action, after the occurrence of an accident, and the decision-making strategies, used by the investigators responsible for this activity, are characteristic of the naturalistic decision making theoretical approach. To attend the proposed objective a descriptive research was undertaken with a sample of professionals that work in this activity. The data collected through individual interviews were analyzed and the results demonstrated that the initial action environment, which includes restricted time, dynamic conditions, the presence of multiple actors, stress and insufficient information is characteristic of the naturalistic decision making. They also demonstrated that, when the investigators make their decisions, they use their experience and the mental simulation, intuition, improvisation, metaphors and analogues cases, as strategies, all of them related to the naturalistic approach of decision making, in order to satisfy the needs of the situation and reach the objectives of the initial action in the accident scenario.

  5. Evaluating advancements in accident investigations using a novel framework

    NARCIS (Netherlands)

    Karanikas, N.; Soltani, P.; de Boer, R.J.; Roelen, A.

    2015-01-01

    Safety is monitored by various proactive and reactive methods, including the investigation of adverse accidents and incidents, which are collectively known as safety investigations. In this study we demonstrate how accident and incident investigation reports can be useful to identify implicit safety

  6. Multidisciplinary accident investigation : volume 2

    Science.gov (United States)

    1976-05-01

    The Task II final report for 1974 of the Multidisciplinary Accident Investigation : Team of the Maryland Medical-Legal Foundation, Inc. is presented. This report describes some preliminary findings emanating from a series of comprehensive, multivaria...

  7. Strategies for dealing with resistance to recommendations from accident investigations

    DEFF Research Database (Denmark)

    Lundberg, J.; Rollenhagen, C.; Hollnagel, E.

    2012-01-01

    Accident investigation reports usually lead to a set of recommendations for change. These recommendations are, however, sometimes resisted for reasons such as various aspects of ethics and power. When accident investigators are aware of this, they use several strategies to overcome the resistance....... This paper describes strategies for dealing with four different types of resistance to change. The strategies were derived from qualitative analysis of 25 interviews with Swedish accident investigators from seven application domains. The main contribution of the paper is a better understanding of effective...... strategies for achieving change associated with accident investigation. (C) 2011 Elsevier Ltd. All rights reserved....

  8. Strategies for dealing with resistance to recommendations from accident investigations.

    Science.gov (United States)

    Lundberg, Jonas; Rollenhagen, Carl; Hollnagel, Erik; Rankin, Amy

    2012-03-01

    Accident investigation reports usually lead to a set of recommendations for change. These recommendations are, however, sometimes resisted for reasons such as various aspects of ethics and power. When accident investigators are aware of this, they use several strategies to overcome the resistance. This paper describes strategies for dealing with four different types of resistance to change. The strategies were derived from qualitative analysis of 25 interviews with Swedish accident investigators from seven application domains. The main contribution of the paper is a better understanding of effective strategies for achieving change associated with accident investigation. Copyright © 2011 Elsevier Ltd. All rights reserved.

  9. Investigation of accidents within construction zones in Louisiana.

    Science.gov (United States)

    1981-07-01

    This investigation is to analyze construction and maintenance work zone accidents by reviewing accident data to determine if deficiencies exist and recommend possible corrective measures for future traffic control applications. To accomplish this, a ...

  10. 32 CFR 634.30 - Use of traffic accident investigation report data.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Use of traffic accident investigation report data... § 634.30 Use of traffic accident investigation report data. (a) Data derived from traffic accident... accidents (collision diagram) will be examined. (b) Law enforcement personnel and others who prepare traffic...

  11. A Serious Game for Traffic Accident Investigators

    Science.gov (United States)

    Binsubaih, Ahmed; Maddock, Steve; Romano, Daniela

    2006-01-01

    In Dubai, traffic accidents kill one person every 37 hours and injure one person every 3 hours. Novice traffic accident investigators in the Dubai police force are expected to "learn by doing" in this intense environment. Currently, they use no alternative to the real world in order to practice. This paper argues for the use of an…

  12. Transition phase in LMFBR hypothetical accidents

    International Nuclear Information System (INIS)

    Ostensen, R.W.; Henninger, R.J.; Jackson, J.F.

    1976-01-01

    Mechanistic analyses of transient-under-cooling accidents have led in some cases to a mild initiating phase instead of a direct hydrodynamic disassembly of the core. The fuel is then trapped in the core by the strong mechanical surroundings and blockages formed by refrozen cladding steel and/or fuel. The formation of fuel blockages has been verified experimentally. The bottled-up core will boil on fission and decay heat, with steel as the working fluid. Boil-up in a churn turbulent flow regime may prevent recriticality due to fuel recompaction. Ultimate fuel removal from the core is probably by a two-phase blow-down after permanent leakage paths are opened. However, a vigorous recriticality can not be precluded. Reactors with void coefficients larger than that in CRBR are more likely to disassemble in the initiating phase, so the transition phase may be unique to small cores

  13. ACCOUNT OF ROAD CONDITIONS WHILE INVESTIGATING TRAFFIC ACCIDENTS

    Directory of Open Access Journals (Sweden)

    D. D. Selioukov

    2010-01-01

    Full Text Available The paper considers problems on better traffic safety at government, authority, engineering and driver activity levels, account of road conditions while investigating traffic accidents. The paper also provides road defects mentioned in forensic transport examinations of traffic accidents.

  14. Plant specific severe accident management - the implementation phase

    International Nuclear Information System (INIS)

    Prior, R.

    1999-01-01

    Many plants are in the process of developing on-site guidance for technical staff to respond to a severe accident situation severe accident management guidance (SAMG). Once the guidance is developed, the SAMG must be implemented at the plant site, and this involves addressing a number of additional aspects. In this paper, approaches to this implementation phase are reviewed, including review and verification of plant specific SAMG, organizational aspects and integration with the emergency plan, training of SAMG users, validation and self-assessment and SAMG maintenance. Examples draw on experience from assisting numerous plants to implement symptom based severe accident management guidelines based on the Westinghouse Owners Group approach, in Westinghouse, non-Westinghouse and VVER plant types. It is hoped that it will be of use to those plant operators about to perform these activities.(author)

  15. Research investigation report on Fukushima Daiichi nuclear accident

    International Nuclear Information System (INIS)

    2012-03-01

    This report was issued in February 2012 by Rebuild Japan Initiative Foundation's Independent Investigation Commission on the Fukushima Daiichi Nuclear Accident, which consisted of six members from the private sector in independent positions and with no direct interest in the business of promoting nuclear power. Commission aimed to determine the truth behind the accident by clarifying the various problems and reveal systematic problems behind these issues so as to create a new starting point by identifying clear lessons learned. Report composed of four chapters; (1) progression of Fukushima accident and resulting damage (accident management after Fukushima accident, and effects and countermeasure of radioactive materials discharged into the environment), (2) response against Fukushima accident (emergency response of cabinet office against nuclear disaster, risk communication and on-site response against nuclear disaster), (3) analysis of historical and structural factors (technical philosophy of nuclear safety, problems of nuclear safety regulation of Fukushima accident, safety regulatory governance and social background of 'Safety Myth'), (4) Global Context (implication in nuclear security, Japan in nuclear safety regime, U.S.-Japan relations for response against Fukushima accident, lessons learned from Fukushima accident - aiming at creation of resilience). Report could identify causes of Fukushima accident and factors related to resulting damages, show the realities behind failure to prevent the spread of damage, and analyze the overall structural and historical background behind the accidents. (T. Tanaka)

  16. Identification and initial assessment of candidate BWR late-phase in-vessel accident management strategies

    International Nuclear Information System (INIS)

    Hodge, S.A.

    1991-01-01

    Work sponsored by the United States Nuclear Regulatory Commission (USNRC) to identify and perform preliminary assessments of candidate BWR [boiling water reactor] in-vessel accident management strategies was completed at Oak Ridge National Laboratory (ORNL) during fiscal year 1990. Mitigative strategies for containment events have been the subject of a companion study at Brookhaven National Laboratory. The focus of this Oak Ridge effort was the development of new strategies for mitigation of the late phase events, that is, the events that would occur in-vessel after the onset of significant core damage. The work began with an investigation of the current status of BWR in-vessel accident management procedures and proceeded through a preliminary evaluation of several candidate new strategies. The steps leading to the identification of the candidate strategies are described. The four new candidate late-phase (in-vessel) accident mitigation strategies identified by this study and discussed in the report are: (1) keep the reactor vessel depressurized; (2) restore injection in a controlled manner; (3) inject boron if control blade damage has occurred; and (4) containment flooding to maintain core and structural debris in-vessel. Additional assessments of these strategies are proposed

  17. Introduction of the Space Shuttle Columbia Accident, Investigation Details, Findings and Crew Survival Investigation Report

    Science.gov (United States)

    Chandler, Michael

    2010-01-01

    As the Space Shuttle Program comes to an end, it is important that the lessons learned from the Columbia accident be captured and understood by those who will be developing future aerospace programs and supporting current programs. Aeromedical lessons learned from the Accident were presented at AsMA in 2005. This Panel will update that information, closeout the lessons learned, provide additional information on the accident and provide suggestions for the future. To set the stage, an overview of the accident is required. The Space Shuttle Columbia was returning to Earth with a crew of seven astronauts on 1Feb, 2003. It disintegrated along a track extending from California to Louisiana and observers along part of the track filmed the breakup of Columbia. Debris was recovered from Littlefield, Texas to Fort Polk, Louisiana, along a 567 statute mile track; the largest ever recorded debris field. The Columbia Accident Investigation Board (CAIB) concluded its investigation in August 2003, and released their findings in a report published in February 2004. NASA recognized the importance of capturing the lessons learned from the loss of Columbia and her crew and the Space Shuttle Program managers commissioned the Spacecraft Crew Survival Integrated Investigation Team (SCSIIT) to accomplish this. Their task was to perform a comprehensive analysis of the accident, focusing on factors and events affecting crew survival, and to develop recommendations for improving crew survival, including the design features, equipment, training and procedures intended to protect the crew. NASA released the Columbia Crew Survival Investigation Report in December 2008. Key personnel have been assembled to give you an overview of the Space Shuttle Columbia accident, the medical response, the medico-legal issues, the SCSIIT findings and recommendations and future NASA flight surgeon spacecraft accident response training. Educational Objectives: Set the stage for the Panel to address the

  18. Investigation into information flow during the accident at Three Mile Island

    International Nuclear Information System (INIS)

    1981-01-01

    This report was prepared in response to a request from NRC Chairman Ahearne that directed the Office of Inspection and Enforcement to resume its investigation of information flow during the accident at Three Mile Island (TMI) that occurred on March 28, 1979. This investigation was resumed on March 21, 1980. The transfer of information among individuals, agencies, and personnel from Metropolitan Edison was analyzed to ascertain what knowledge was held by various individuals of the specific events, parameters, and systems during the accident at TMI. Maximum use was made of existing records, and additional interviews were conducted to clarify areas that had not been pursued during earlier investigations. Although the passage of time between the accident and post-accident interviews hampered precise recollections of events and circumstances, the investigation revealed that information was not intentionally withheld during the accident and that the system for effective transfer of information was inadequate during the accident

  19. Strategies for dealing with resistance to recommendations from accident investigations

    OpenAIRE

    Lundberg, Jonas; Rollenhagen, Carl; Hollnagel, Erik; Rankin, Amy

    2012-01-01

    Accident investigation reports usually lead to a set of recommendations for change. These recommendations are, however, sometimes resisted for reasons such as various aspects of ethics and power. When accident investigators are aware of this, they use several strategies to overcome the resistance. This paper describes strategies for dealing with four different types of resistance to change. The strategies were derived from qualitative analysis of 25 interviews with Swedish accident investigat...

  20. Accident investigation practices in Europe--main responses from a recent study of accidents in industry and transport.

    Science.gov (United States)

    Roed-Larsen, Sverre; Valvisto, T; Harms-Ringdahl, L; Kirchsteiger, C

    2004-07-26

    Europe has during recent years been shocked by disasters from natural events and technical breakdowns. The consequences have been comprehensive, measured by lost lives, injuries, and material and environmental damage. ESReDA wanted in 2000--by setting up a special expert group on accident investigation--to clarify the state of art of accident investigation practices and to map the use of thoroughly accident investigation in order to learn lessons from past disasters and prevent new ones. The scope was to cover three sectors in the society: transport, production processes and storage of hazardous materials, and energy production. The main method used was a questionnaire, which was sent in 2001 to about 150 organisations. About 50 replies were analysed. The replies showed great variations but also similarities, among others in definition of accident and incident, the objectives of the investigation team, criteria used to start an investigation, the status of the investigation organisation, the flow of information, the composition of the investigation team, and the use of internal or international procedures or rules. Several methods (in total 14 different methods were mentioned) were used for carrying out accident /incident investigations. Most of the respondents were willing to co-operate in one or another way with ESReDA. Although there are important biases in the material, the results from questionnaire are important inputs to the future work of ESReDA Expert group in this field. 3 safety approaches have been identified.

  1. Investigating accidents involving aircraft manufactured from polymer composite materials

    OpenAIRE

    Dunn, Leigh

    2013-01-01

    This thesis looks into the examination of polymer composite wreckage from the perspective of the aircraft accident investigator. It develops an understanding of the process of wreckage examination as well as identifying the potential for visual and macroscopic interpretation of polymer composite aircraft wreckage. The in-field examination of aircraft wreckage, and subsequent interpretations of material failures, can be a significant part of an aircraft accident investigation. ...

  2. Operational intervention levels and related requirements on radiation monitoring during pre-release / release phase of an accident

    International Nuclear Information System (INIS)

    Carny, P.; Cabanekova, H

    2003-01-01

    In this paper authors discusses required outputs of emergency radiological monitoring in various phases of an accident and rationale of these requirements. In various phases of an accident various intervention levels are important and consequently various radiological quantities should be preferably measured. Distinguished tasks or aims of monitoring in different phases of accident have strong influence on methods of monitoring, instrumentation and capabilities of monitoring groups. Required tasks and outputs of monitoring are discussed

  3. The official report of the Fukushima Nuclear Accident Independent Investigation Commission

    International Nuclear Information System (INIS)

    2012-07-01

    In October 2011, the Act regarding Fukushima Nuclear Accident Independent Investigation Commission was enacted to investigate the Fukushima accident with the authority to request documents and request the legislative branch to use its investigative powers to obtain any necessary documents or evidence required. In December 2011, chairman and nine other members were appointed. After a six-month investigation, Commission had concluded. 'In order to prevent future disasters, fundamental reforms must take place covering both the structure of electric power industry and the structure of related government and regulatory agencies as well as operation processes, for both normal and emergency situations'. Main parts of report consisted of overview, conclusions and recommendations, and six findings; (1) was the accident preventable?, (2) Escalation of the accident, (3) Emergency response to the accident, (4) Spread of the damage, (5) Organizational issues in accident prevention and response and (6) the legal system. Based on the above findings, Commission made seven recommendations regarding (1) Monitoring of the nuclear regulatory body by the National Diet, (2) Reform the crisis management system, (3) Government responsibility for public health and welfare, (4) Monitoring the operators, (5) Criteria for the new regulatory body, (6) Reforming laws related to nuclear energy and (7) Develop a system of independent investigation commissions. National Diet's thorough debate and deliberate on these recommendation was highly encouraged for the future. (T. Tanaka)

  4. Lessons learned from accidents investigations

    Energy Technology Data Exchange (ETDEWEB)

    Zuniga-Bello, P. [Consejo Nacional de Ciencia y Tecnologia (CONACYT), Mexico City (Mexico); Croft, J. [National Radiological Protection Board (United Kingdom); Glenn, J

    1997-12-31

    Accidents from three main practices: medical applications, industrial radiography and industrial irradiators are used to illustrate some common causes of accidents and the main lessons to be learned. A brief description of some of these accidents is given. Lessons learned from the described accidents are approached by subjects covering: safety culture, quality assurance, human factors, good engineering practice, defence in depth, security of sources, safety assessment and monitoring and verification compliance. (author)

  5. Lessons learned from accident investigations

    International Nuclear Information System (INIS)

    Zuniga-Bello, P.; Croft, J.R.; Glenn, J.

    1998-01-01

    Accidents in three main practices - medical applications, industrial radiography and industrial irradiators - are used to illustrate some common causes of accidents and the main lessons to be learned from them. A brief description of some of these accidents is given. Lessons learned from the accidents described are approached bearing in mind: safety culture, quality assurance, human factors, good engineering practice, defence in depth, security of sources, safety assessment and monitoring and verification compliance. (author)

  6. Accident Investigation on a Large Construction Project: An Ethnographic Case Study

    OpenAIRE

    Oswald, David; Smith, Simon; Sherratt, Fred

    2015-01-01

    Unsafe acts are believed to account for approximately 80 to 90 percent of accidents. This paper will investigate this issue through exploring the reasoning behind the unsafe acts that resulted in a minor accident on a large construction project (+$1B) in the UK. The study described here, part of a wider PhD project, was undertaken using an ethnographic approach. Participant observation enabled the researcher to be involved in the whole accident investigation process including witness statemen...

  7. Modular Accident Analysis Program (MAAP) - MELCOR Crosswalk: Phase II Analyzing a Partially Recovered Accident Scenario

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, Nathan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Faucett, Christopher [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Haskin, Troy Christopher [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Luxat, Dave [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Geiger, Garrett [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Codella, Brittany [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-10-01

    Following the conclusion of the first phase of the crosswalk analysis, one of the key unanswered questions was whether or not the deviations found would persist during a partially recovered accident scenario, similar to the one that occurred in TMI - 2. In particular this analysis aims to compare the impact of core degradation morphology on quenching models inherent within the two codes and the coolability of debris during partially recovered accidents. A primary motivation for this study is the development of insights into how uncertainties in core damage progression models impact the ability to assess the potential for recovery of a degraded core. These quench and core recovery models are of the most interest when there is a significant amount of core damage, but intact and degraded fuel still remain in the cor e region or the lower plenum. Accordingly this analysis presents a spectrum of partially recovered accident scenarios by varying both water injection timing and rate to highlight the impact of core degradation phenomena on recovered accident scenarios. This analysis uses the newly released MELCOR 2.2 rev. 966 5 and MAAP5, Version 5.04. These code versions, which incorporate a significant number of modifications that have been driven by analyses and forensic evidence obtained from the Fukushima - Daiichi reactor site.

  8. In-depth investigation of escalator riding accidents in heavy capacity MRT stations.

    Science.gov (United States)

    Chi, Chia-Fen; Chang, Tin-Chang; Tsou, Chi-Lin

    2006-07-01

    In 2000, the accident rate for escalator riding was about 0.815 accidents per million passenger trips through Taipei Metro Rapid Transit (MRT) heavy capacity stations. In order to reduce the probability and severity of escalator riding accidents and enhance the safety of passengers, the Drury and Brill model [Drury, C.G., Brill, M., 1983. Human factors in consumer product accident investigation. Hum. Factors 25 (3), 329-342] for in-depth investigation was adopted to analyze the 194 escalator riding accidents in terms of victim, task, product and environment. Prevention measures have been developed based on the major causes of accidents and other related contributing factors. The results from the analysis indicated that the majority of the escalator riding accidents was caused by passengers' carrying out other tasks (38 cases, including carrying luggage 24 cases, looking after accompany persons 9 cases, and 5 others), loss of balance (26 cases, 13.4%), not holding the handrail (20 cases, 10.3%), unhealthy passengers (18 cases, 9.3%), followed by people struck by other passenger (16 cases, 8.2%). For female passengers aged 15-64 years, their rushing for trains accidents could have been prevented by wearing safer footwear or by appropriate signing being provided indicating the location and traveling direction of escalators. Female passengers aged 65 years and above whose accidents were caused by loss of balance, should be encouraged to take the elevator instead. To prevent entrapment injuries, following a stricter design code can be most effective. Further in-depth accident investigation is suggested to cover the activity of the victim prior to the accident, any involved product, the location of the accident on the escalator, any medical treatment, what went wrong, opinion of the respondent on the causes of the accident, and personal characteristics of the passengers. Also, management must trade off productivity and safety appropriately to prevent "Organizational

  9. Relocation tabletop exercise: federal radiological response in the post-accident phase

    International Nuclear Information System (INIS)

    Grant, K.; Adler, M.V.; Wolff, W.F.

    1986-01-01

    The federal Radiological Emergency Response Plan (FRERP) was developed to provide the framework for coordinating federal radiological assistance to states and to local authorities faced with a large radiological accident. The Relocation Tabletop Exercise was conducted on December 9-11, 1985 at the Beaver Valley Power Station, the site of the simulated accident. The exercise scenario had postulated a substantial release of radioactive materials from a fuel handling accident at the Beaver Valley Power Station in Shippingport, Pennsylvania, leaving radioactive materisls deposited over part of the surrounding area. The exercise was structured as a sequential series of nice mini-scenarios, each of which focused on one problems. The exercise was intended to identify issues and problems which needed consideration or procedures which might need to be developed for this post-accident phase. It was a ''no-fault'' excercise

  10. Independent accident investigation: a modern safety tool

    International Nuclear Information System (INIS)

    Stoop, John A.

    2004-01-01

    Historically, safety has been subjected to a fragmented approach. In the past, every department has had its own responsibility towards safety, focusing either on working conditions, internal safety, external safety, rescue and emergency, public order or security. They each issued policy documents, which in their time were leading statements for elaboration and regulation. They also addressed safety issues with tools of various nature, often specifically developed within their domain. Due to a series of major accidents and disasters, the focus of attention is shifting from complying with quantitative risk standards towards intervention in primary operational processes, coping with systemic deficiencies and a more integrated assessment of safety in its societal context. In The Netherlands recognition of the importance of independent investigations has led to an expansion of this philosophy from the transport sector to other sectors. The philosophy now covers transport, industry, defense, natural disaster, environment and health and other major occurrences such as explosions, fires, and collapse of buildings or structures. In 2003 a multi-sector covering law will establish an independent safety board in The Netherlands. At a European level, mandatory investigation agencies are recognized as indispensable safety instruments for aviation, railways and the maritime sector, for which EU Directives are in place or being progressed [Transport accident and incident investigation in the European Union, European Transport Safety Council, ISBN 90-76024-10-3, Brussel, 2001]. Due to a series of major events, attention has been drawn to the consequences of disasters, highlighting the involvement of rescue and emergency services. They also have become subjected to investigative efforts, which in return, puts demands on investigation methodology. This paper comments on an evolutionary development in safety thinking and of safety boards, highlighting some consequences for strategic

  11. Comparison of different methods for work accidents investigation in hospitals: A Portuguese case study.

    Science.gov (United States)

    Nunes, Cláudia; Santos, Joana; da Silva, Manuela Vieira; Lourenço, Irina; Carvalhais, Carlos

    2015-01-01

    The hospital environment has many occupational health risks that predispose healthcare workers to various kinds of work accidents. This study aims to compare different methods for work accidents investigation and to verify their suitability in hospital environment. For this purpose, we selected three types of accidents that were related with needle stick, worker fall and inadequate effort/movement during the mobilization of patients. A total of thirty accidents were analysed with six different work accidents investigation methods. The results showed that organizational factors were the group of causes which had the greatest impact in the three types of work accidents. The methods selected to be compared in this paper are applicable and appropriate for the work accidents investigation in hospitals. However, the Registration, Research and Analysis of Work Accidents method (RIAAT) showed to be an optimal technique to use in this context.

  12. Investigation report on causes of radiation underexposure accident at Yamagata University Hospital and Prevention of Similar accident

    International Nuclear Information System (INIS)

    2005-01-01

    The accident in the title was announced on February 18, 2004 by the hospital, which asked its investigation immediately. The group based on 4 academic societies concerned, thereby started investigations of the in-house reports on the accident and of subsequent hospital visit in March, which involved hearing from personnel concerned, physical/technological examinations and clinical evaluation, with respect to the hospital system for radiation treatment, flow of the treatment, accident details, estimation of the actual expose dose and classification of patients. The investigational group found for the actual number of patients underexposed to be 36 (63, in the in-house report) in 1,377. The cause of the accident was thought essentially the input error for the correct power coefficient 1.032 to be a wrong one 1.320 for 15 x 15 cm 4 MV X-ray. The error had been overlooked by the contract operator from the introduction of the treatment planning equipment in 1999. For prevention, setting up of quality assurance (QA) program by the hospital, the user itself, was pointed out necessary. Making the guideline for introducing the new equipment was conceivably an important work of the trader. (N.I.)

  13. Diamond Fire: Serious Accident Investigation Report

    Science.gov (United States)

    John Waconda; Ivan Pupulidy; Leonard Diaz; Robin Broyles; Roberta Junge; James Saveland

    2012-01-01

    This incident is effectively two studies. The first study, and the reason the Serious Accident Investigation Team was assembled, was due to a fatality, which the autopsy later determined to have been caused by a heart attack. The team was not aware of the cause of death for over 4 weeks after the incident occurred. However, the observed and reported cases of heat...

  14. Policy elements for post-accident management in the event of nuclear accident. Document drawn up by the Steering Committee for the Management of the Post-Accident Phase of a Nuclear Accident (CODIRPA). Final version - 5 October 2012

    International Nuclear Information System (INIS)

    2012-01-01

    Pursuant to the Inter-ministerial Directive on the Action of the Public Authorities, dated 7 April 2005, in the face of an event triggering a radiological emergency, the National directorate on nuclear safety and radiation protection (DGSNR), which became the Nuclear safety authority (ASN) in 2006, was tasked with working the relevant Ministerial offices in order to set out the framework and outline, prepare and implement the provisions needed to address post-accident situations arising from a nuclear accident. In June 2005, the ASN set up a Steering committee for the management of the post-accident phase in the event of nuclear accident or a radiological emergency situation (CODIRPA), put in charge of drafting the related policy elements. To carry out its work, CODIRPA set up a number of thematic working groups from 2005 on, involving in total several hundred experts from different backgrounds (local information commissions, associations, elected officials, health agencies, expertise agencies, authorities, etc.). The working groups reports have been published by the ASN. Experiments on the policy elements under construction were carried out at the local level in 2010 across three nuclear sites and several of the neighbouring municipalities, as well as during national crisis drills conducted since 2008. These works gave rise to two international conferences organised by ASN in 2007 and 2011. The policy elements prepared by CODIRPA were drafted in regard to nuclear accidents of medium scale causing short-term radioactive release (less than 24 hours) that might occur at French nuclear facilities equipped with a special intervention plan (PPI). They also apply to actions to be carried out in the event of accidents during the transport of radioactive materials. Following definitions of each stage of a nuclear accident, this document lists the principles selected by CODIRPA to support management efforts subsequent to a nuclear accident. Then, it presents the main

  15. Safety and Health Standard 110: Incident/accident reporting and investigation

    Energy Technology Data Exchange (ETDEWEB)

    Sones, K. [West Kootenay Power, BC (Canada)

    1999-10-01

    Incident/accident reporting requirements in effect at West Kootenay Power are discussed. Details provided include definitions of low risk, high risk, and critical events, the incidents to be reported, the nature of the reports, the timelines, the investigation to be undertaken for each type of incident/accident, counselling services available to employees involved in serious incidents, and the procedures to be followed in accidents involving serious injury to non-employees. The emphasis is on the `critical five` high risk events and the procedures relating to them.

  16. The Fukushima Daiichi nuclear accident final report of the AESJ investigation committee

    CERN Document Server

    Atomic Energy Society of Japan

    2015-01-01

    The Magnitude 9 Great East Japan Earthquake on March 11, 2011, followed by a massive tsunami struck  TEPCO’s Fukushima Daiichi Nuclear Power Station and triggered an unprecedented core melt/severe accident in Units 1 – 3. The radioactivity release led to the evacuation of local residents, many of whom still have not been able to return to their homes. As a group of nuclear experts, the Atomic Energy Society of Japan established the Investigation Committee on the Nuclear Accident at the Fukushima Daiichi Nuclear Power Station, to investigate and analyze the accident from scientific and technical perspectives for clarifying the underlying and fundamental causes, and to make recommendations. The results of the investigation by the AESJ Investigation Committee has been compiled herewith as the Final Report. Direct contributing factors of the catastrophic nuclear incident at Fukushima Daiichi NPP initiated by an unprecedented massive earthquake/ tsunami – inadequacies in tsunami measures, severe accident ma...

  17. Report of investigation regarding accident in Tomsk reprocessing facilities in Russia

    International Nuclear Information System (INIS)

    1994-01-01

    At 1258 on April 6, 1993, the explosion accident of a welded tank occurred in the military reprocessing facilities in Tomsk, Siberia District, Russia. Japan carried out the investigation of the effect on the environmental radiation in Japan, dispatched the investigation mission to Russia, and explained the way of thinking on securing the safety of Japanese reprocessing plants to local communities. Science and Technology Agency organized the working group for investigating the accident, which exerted efforts to collect the information, analyze and examine it. This report is the summary of its results. The explosion occurred in the tank for adjusting the acid concentration of the solution to be supplied to the solvent extraction shop, and the building was destructed. No one died or was injured. The results of the radioactivity examination are reported. The process of the accident was inferred, and described. The factors that caused the accident were the mixing of organic impurities the use of the diluting liquid containing aromatic hydrocarbon, the contact of nitric acid with organic substances at high temperature, in sufficient agitation at the time of pouring nitric acid and so on. The safety countermeasures in Japanese reprocessing plants and the response by Japan based on the accident are described. (K.I.)

  18. Traffic Accident Investigation: A Suitable Theme for Teaching Mechanics.

    Science.gov (United States)

    Tao, P. K.

    1987-01-01

    Suggests the development of curriculum materials on the applications of physics to traffic accident investigations as a theme for teaching mechanics. Describes several standard investigation techniques and the physics principles involved, along with some sample exercises. (TW)

  19. Statistical analysis of the early phase of SBO accident for PWR

    Energy Technology Data Exchange (ETDEWEB)

    Kozmenkov, Yaroslav, E-mail: y.kozmenkov@hzdr.de; Jobst, Matthias, E-mail: m.jobst@hzdr.de; Kliem, Soeren, E-mail: s.kliem@hzdr.de; Schaefer, Frank, E-mail: f.schaefer@hzdr.de; Wilhelm, Polina, E-mail: p.wilhelm@hzdr.de

    2017-04-01

    Highlights: • Best estimate model of generic German PWR is used in ATHLET-CD simulations. • Uncertainty and sensitivity analysis of the early phase of SBO accident is presented. • Prediction intervals for occurrence of main events are evaluated. - Abstract: A statistical approach is used to analyse the early phase of station blackout accident for generic German PWR with the best estimate system code ATHLET-CD as a computation tool. The analysis is mainly focused on the timescale uncertainties of the accident events which can be detected at the plant. The developed input deck allows variations of all input uncertainty parameters relevant to the case. The list of identified and quantified input uncertainties includes 30 parameters related to the simulated physical phenomena/processes. Time uncertainties of main events as well as the major contributors to these uncertainties are defined. The uncertainty in decay heat has the highest contribution to the uncertainties of the analysed events. A linear regression analysis is used for predicting times of future events from detected times of occurred/past events. An accuracy of event predictions is estimated and verified. The presented statistical approach could be helpful for assessing and improving existing or elaborating additional emergency operating procedures aimed to prevent severe damage of reactor core.

  20. German Phase B [risk study] highlights the role of [reactor] accident management

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    Phase B of the German probabilistic risk assessment study, now scheduled for publication this month, suggests that reactor accident management measures can prevent or mitigate about 90 per cent of event sequences. (author)

  1. Postulated accidents

    International Nuclear Information System (INIS)

    Ullrich, W.

    1980-01-01

    This lecture on 'Postulated Accidents' is the first of a series of lectures on the dynamic and transient behaviour of nuclear power plants, especially pressurized water reactors. The main points covered will be: Reactivity Accidents, Transients (Intact Loop) and Loss of Cooland Accidents (LOCA) including small leak. This lecture will discuss the accident analysis in general, the definition of the various operational phases, the accident classification, and, as an example, an accident sequence analysis on the basis of 'Postulated Accidents'. (orig./RW)

  2. Investigation of evaluation method for marine radiological impact during an accident

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-08-15

    In 2012, JNES carried out to investigate the measurement information of radionuclide released to the ocean at Fukushima Daiichi NPP accident, the foreign regulation for marine radiological impact, and the evaluation method for release and diffusion to the ocean at the accident inside and outside Japan. (author)

  3. Multidisciplinary perspective on accident investigation

    International Nuclear Information System (INIS)

    Basnyat, S.; Chozos, N.; Palanque, P.

    2006-01-01

    The increasing complexity of many computer-controlled application processes is placing increasing demands on the investigation of adverse events. At the same time, there is a growing realisation that accident investigators must consider a wider range of contributory and contextual factors that help to shape human behaviour in the causes of safety-related incidents. A range of techniques have been developed to address these issues. For example (as we show in this paper), task modelling techniques have been extended from human computer interaction and systems design to analyse the causes and consequences of operator 'error'. Similarly, barrier analysis has been widely used to identify the way in which defences either protected or failed to protect a target system from potential hazards. Many barriers fail from common causes, including misconceptions that can be traced back to early stages in the development of a safety-critical system. For instance, unwarranted assumptions can be made about the impact of training on operator behaviour in emergency situations. Similarly, barrier analysis can also be used before a system has been designed to inform the system model and make it more tolerant to errors by incorporating human and technical barriers into the design. Task models often uncover deep-rooted problems, for instance, in workload allocation across many different aspects of an interactive control system. It can be difficult to use barrier and task analysis to trace these common causes that lie behind the failure of many different defences. In order to deal with this complex combination of contributory factors and systems, we promote the use of abstraction (via models) as a way of representing these components and their interrelations whether it is design, construction or investigation. We use, to formally model an abstraction of the system. Additionally, the system model (described using a dialect of high-level Petri-nets) allows to reason about the system and to

  4. Multidisciplinary perspective on accident investigation

    Energy Technology Data Exchange (ETDEWEB)

    Basnyat, S. [LIIHS-IRIT, Universite Paul Sabatier, 118, route de Narbonne, 31062 Toulouse Cedex 4 (France)]. E-mail: basnyat@irit.fr; Chozos, N. [Dept. of Computing Science, University of Glasgow, Glasgow, G12 8QQ, Scotland (United Kingdom)]. E-mail: nick@dcs.gla.ac.uk; Palanque, P. [LIIHS-IRIT, Universite Paul Sabatier, 118, route de Narbonne, 31062 Toulouse Cedex 4 (France)]. E-mail: palanque@irit.fr

    2006-12-15

    The increasing complexity of many computer-controlled application processes is placing increasing demands on the investigation of adverse events. At the same time, there is a growing realisation that accident investigators must consider a wider range of contributory and contextual factors that help to shape human behaviour in the causes of safety-related incidents. A range of techniques have been developed to address these issues. For example (as we show in this paper), task modelling techniques have been extended from human computer interaction and systems design to analyse the causes and consequences of operator 'error'. Similarly, barrier analysis has been widely used to identify the way in which defences either protected or failed to protect a target system from potential hazards. Many barriers fail from common causes, including misconceptions that can be traced back to early stages in the development of a safety-critical system. For instance, unwarranted assumptions can be made about the impact of training on operator behaviour in emergency situations. Similarly, barrier analysis can also be used before a system has been designed to inform the system model and make it more tolerant to errors by incorporating human and technical barriers into the design. Task models often uncover deep-rooted problems, for instance, in workload allocation across many different aspects of an interactive control system. It can be difficult to use barrier and task analysis to trace these common causes that lie behind the failure of many different defences. In order to deal with this complex combination of contributory factors and systems, we promote the use of abstraction (via models) as a way of representing these components and their interrelations whether it is design, construction or investigation. We use, to formally model an abstraction of the system. Additionally, the system model (described using a dialect of high-level Petri-nets) allows to reason about the

  5. Psychophysiological and other factors affecting human performance in accident prevention and investigation

    International Nuclear Information System (INIS)

    Klinestiver, L.R.

    1980-01-01

    Psychophysiological factors are not uncommon terms in the aviation incident/accident investigation sequence where human error is involved. It is highly suspect that the same psychophysiological factors may also exist in the industrial arena where operator personnel function; but, there is little evidence in literature indicating how management and subordinates cope with these factors to prevent or reduce accidents. It is apparent that human factors psychophysological training is quite evident in the aviation industry. However, while the industrial arena appears to analyze psychophysiological factors in accident investigations, there is little evidence that established training programs exist for supervisors and operator personnel

  6. THE USE OF AVIATION ACCIDENT INVESTIGATION REPORTS AS EVIDENCE IN COURT

    Directory of Open Access Journals (Sweden)

    Sorana POP PĂUN

    2016-05-01

    Full Text Available Air transport is an essential part of the international society, constituting a liaison between people and continents and an important contributor to the world economy and globalization. Aircraft operation has grown in complexity needing for a safety level to be maintained and constantly grown. Along with the development of the aviation industry, the legal system in the aviation field has registered significant challenges, one of them being the claims related to air crashes which are contested. The investigation process of an accident or incident has become not only important for the safety of operations but also to the establishment of legal fault and blame. The article proposes to present the principles of conducting and accident and incident investigation, the value of the report and new developments in relation to the recent case law on the use of the accident investigation report in Court.

  7. Socioeconomic consequences of nuclear reactor accidents

    International Nuclear Information System (INIS)

    Tawil, J.J.; Callaway, J.W.; Coles, B.L.; Cronin, F.J.; Currie, J.W.; Imhoff, K.L.; Lewis, P.M.; Nesse, R.J.; Strenge, D.L.

    1984-06-01

    This report identifies and characterizes the off-site socioeconomic consequences that would likely result from a severe radiological accident at a nuclear power plant. The types of impacts that are addressed include economic impacts, health impacts, social/psychological impacts and institutional impacts. These impacts are identified for each of several phases of a reactor accident - from the warning phase through the post-resettlement phase. The relative importance of the impact during each accident phase and the degree to which the impact can be predicted are indicated. The report also examines the methods that are currently used for assessing nuclear reactor accidents, including development of accident scenarios and the estimating of socioeconomic accident consequences with various models. Finally, a critical evaluation is made regarding the use of impact analyses in estimating the contribution of socioeconomic consequences to nuclear accident reactor accident risk. 116 references, 7 figures, 15 tables

  8. Application of the severe accident code ATHLET-CD. Modelling and evaluation of accident management measures (Project WASA-BOSS)

    Energy Technology Data Exchange (ETDEWEB)

    Wilhelm, Polina; Jobst, Matthias; Kliem, Soeren; Kozmenkov, Yaroslav; Schaefer, Frank [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Div. Reactor Safety

    2016-07-01

    The improvement of the safety of nuclear power plants is a continuously on-going process. The analysis of transients and accidents is an important research topic, which significantly contributes to safety enhancements of existing power plants. In case of an accident with multiple failures of safety systems core uncovery and heat-up can occur. In order to prevent the accident to turn into a severe one or to mitigate the consequences of severe accidents, different accident management measures can be applied. Numerical analyses are used to investigate the accident progression and the complex physical phenomena during the core degradation phase, as well as to evaluate the effectiveness of possible countermeasures in the preventive and mitigative domain [1, 2]. The presented analyses have been performed with the computer code ATHLET-CD developed by GRS [3, 4].

  9. Investigation of safety measures to severe accident of Fast Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    So as to plan the accident management to severe accident of Fast Breeder Reactor (FBR), it is primary important to understand the progression of severe accident (SA) precisely. In this study, it has been aimed to reveal two items that work as keys in the evaluation of SA in sodium cooled FBR. One is the cool-ability of degraded core on the core support plate by sodium natural circulation in the post accident heat removal (PAHR) phase. An obstacle that hinders the smooth heat transfer from fuel debris to coolant is the formation of sodium-uranate by chemical reaction between sodium and fuel. Following the measurement of physical values of sodium-uranate in FY 2011, experiments has been performed to reveal the conditions for sodium-uranate formation on fuel debris in sodium pool simulating the actual situation of the degraded core. The cool-ability of the debris bed was analyzed using the Lipinski 1-D model. Another research performed in this study is the measurement of fission product (cesium and antimony) evaporation rates from FBR fuel as a function of temperature, because presently the fission product evaporation rates data for LWR is also temporarily used for FBR SA analysis. The measurement was performed using the irradiated fuels in the Test Reactor JOYO. (author)

  10. Challenging the immediate causes: A work accident investigation in an oil refinery using organizational analysis.

    Science.gov (United States)

    Beltran, Sandra Lorena; Vilela, Rodolfo Andrade de Gouveia; de Almeida, Ildeberto Muniz

    2018-01-01

    In many companies, investigations of accidents still blame the victims without exploring deeper causes. Those investigations are reactive and have no learning potential. This paper aims to debate the historical organizational aspects of a company whose policy was incubating an accident. The empirical data are analyzed as part of a qualitative study of an accident that occurred in an oil refinery in Brazil in 2014. To investigate and analyse this case we used one-to-one and group interviews, participant observation, Collective Analyses of Work and a documentary review. The analysis was conducted on the basis of concepts of the Organizational Analysis of the event and the Model for Analysis and Prevention of Work Accidents. The accident had its origin in the interaction of social and organizational factors, among them being: excessively standardized culture, management tools and outcome indicators that give a false sense of safety, the decision to speed up the project, the change of operator to facilitate this outcome and performance management that encourages getting around the usual barriers. The superficial accident analysis conducted by the company that ignored human and organizational factors reinforces the traditional safety culture and favors the occurrence of new accidents.

  11. Estimation of fatality and injury risk by means of in-depth fatal accident investigation data.

    Science.gov (United States)

    Yannis, George; Papadimitriou, Eleonora; Dupont, Emmanuelle; Martensen, Heike

    2010-10-01

    In this article the factors affecting fatality and injury risk of road users involved in fatal accidents are analyzed by means of in-depth accident investigation data, with emphasis on parameters not extensively explored in previous research. A fatal accident investigation (FAI) database is used, which includes intermediate-level in-depth data for a harmonized representative sample of 1300 fatal accidents in 7 European countries. The FAI database offers improved potential for analysis, because it includes information on a number of variables that are seldom available, complete, or accurately recorded in road accident databases. However, the fact that only fatal accidents are examined requires for methodological adjustments, namely, the correction for two types of effects on a road user's baseline risk: "accident size" effects, and "relative vulnerability" effects. Fatality and injury risk can be then modeled through multilevel logistic regression models, which account for the hierarchical dependences of the road accident process. The results show that the baseline fatality risk of road users involved in fatal accidents decreases with accident size and increases with the vulnerability of the road user. On the contrary, accident size increases nonfatal injury risk of road users involved in fatal accidents. Other significant effects on fatality and injury risk in fatal accidents include road user age, vehicle type, speed limit, the chain of accident events, vehicle maneuver, and safety equipment. In particular, the presence and use of safety equipment such as seat belt, antilock braking system (ABS), and electronic stability program (ESP) are protection factors for car occupants, especially for those seated at the front seats. Although ABS and ESP systems are typically associated with positive effects on accident occurrence, the results of this research revealed significant related effects on accident severity as well. Moreover, accident consequences are more severe

  12. Modelling and analysis of severe accidents for VVER-1000 reactors

    International Nuclear Information System (INIS)

    Tusheva, Polina

    2012-01-01

    Accident conditions involving significant core degradation are termed severe accidents /IAEA: NS-G-2.15/. Despite the low probability of occurrence of such events, the investigation of severe accident scenarios is an important part of the nuclear safety research. Considering a hypothetical core melt down scenario in a VVER-1000 light water reactor, the early in-vessel phase focusing on the thermal-hydraulic phenomena, and the late in-vessel phase focusing on the melt relocation into the reactor pressure vessel (RPV) lower head, are investigated. The objective of this work is the assessment of severe accident management procedures for VVER-1000 reactors, i.e. the estimation of the maximum period of time available for taking appropriate measures and particular decisions by the plant personnel. During high pressure severe accident sequences it is of prime importance to depressurize the primary circuit in order to allow for effective injection from the emergency core cooling systems and to avoid reactor pressure vessel failure at high pressure that could cause direct containment heating and subsequent challenge to the containment structure. Therefore different accident management measures were investigated for the in-vessel phase of a hypothetical station blackout accident using the severe accident code ASTEC, the mechanistic code ATHLET and the multi-purpose code system ANSYS. The analyses performed on the PHEBUS ISP-46 experiment, as well as simulations of small break loss of coolant accident and station blackout scenarios were used to contribute to the validation and improvement of the integral severe accident code ASTEC. Investigations on the applicability and the effectiveness of accident management procedures in the preventive domain, as well as detailed analyses on the thermal-hydraulic phenomena during the early in-vessel phase of a station blackout accident have been performed with the mechanistic code ATHLET. The results of the simulations show, that the

  13. Investigations of radioactivity level variations in Armenia after the Chernobyl accident

    International Nuclear Information System (INIS)

    Nalbandyan, A.

    2006-01-01

    The problem of radioactive pollution of biosphere has been acquiring a special topicality after nuclear weapon testing and NPP-induced accidents that have already brought to global pollution of the Earth with radioactive substances. One of visual examples of regional radioactive pollution is dispersion of emissions all over the territory of Central Europe after the Chernobyl accident, which aftermaths impacted Armenia, as well. Monitoring investigations in the Ararat Valley showed a precise peak of gross radioactivity of atmospheric fallout in 1986 - the year of Chernobyl accident. Gross mean annual radioactivity was established 1783 10 7 Bq/KXm 2 yr. Later, a sharp fall in the activity was observed. Mostly, radioactive fallout consisted of short-lived radionuclides. Measurements for 1986-1987 showed that gross β-radioactivity level in soils amounted to 977-1022 Bq/KXg, repeated measurements in 1991 allowed establishing 640-656 Bq/KXg. A precise indicator of radioactive emissions that reached Armenia after the Chernobyl accident was a short-lived radionuclide 134 Cs (T 1 /2=2.07 yr) identified in soils. Measurements made 2 years later showed half as much decay of 134 Cs, and in some points established were its traces only. 137 Cs/134 Cs ratio in varied 1.4 to 1.8 in atmospheric fallout and 2.1 to 33.4 in soils. Thus, monitoring investigations evidence a regional character of Chernobyl emission dispersion, this being proved by investigations of radioactivity level variations in Armenia, too

  14. Multi-phase model development to assess RCIC system capabilities under severe accident conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kirkland, Karen Vierow [Texas A & M Univ., College Station, TX (United States); Ross, Kyle [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Beeny, Bradley [Texas A & M Univ., College Station, TX (United States); Luthman, Nicholas [Texas A& M Engineering Experiment Station, College Station, TX (United States); Strater, Zachary [Texas A & M Univ., College Station, TX (United States)

    2017-12-23

    The Reactor Core Isolation Cooling (RCIC) System is a safety-related system that provides makeup water for core cooling of some Boiling Water Reactors (BWRs) with a Mark I containment. The RCIC System consists of a steam-driven Terry turbine that powers a centrifugal, multi-stage pump for providing water to the reactor pressure vessel. The Fukushima Dai-ichi accidents demonstrated that the RCIC System can play an important role under accident conditions in removing core decay heat. The unexpectedly sustained, good performance of the RCIC System in the Fukushima reactor demonstrates, firstly, that its capabilities are not well understood, and secondly, that the system has high potential for extended core cooling in accident scenarios. Better understanding and analysis tools would allow for more options to cope with a severe accident situation and to reduce the consequences. The objectives of this project were to develop physics-based models of the RCIC System, incorporate them into a multi-phase code and validate the models. This Final Technical Report details the progress throughout the project duration and the accomplishments.

  15. German risk study, phase (DRS-B)

    International Nuclear Information System (INIS)

    Werner, W.

    1992-01-01

    The first risk investigations were primarily intended to estimate the risk of accidents in nuclear power plants and to compare it with other natural risk and civilization risks. The American reactor safety study WASH 1400 and the German risk study phase A (DRS-A) gave a detailed analyses of the offsite consequences of accidents, especially the magnitude and frequency of health damage for the population. Risk investigations today are primarily used to examine the design of safety systems and to further develop the entire safety concept. Safety investigations have shown that nuclear power plants still possess safety reserves if safety systems do not operate as planned. These safety reserves can be exploited in the sense of a further development of safety by plant internal emergency measures. One purpose of risk analyses is to identify such measures and to evaluate their feasibility and effectiveness. The most important goals of the investigations in DRS-B were: Identification of vulnerabilities and possible safety improvements; determination of safety reserves during accident sequences exceeding the design limits; evaluation of plant internal emergency measures. Thus, goals in phase B compared with phase A have changed from investigations of the magnitude of damage to detailed analysis of the plant systems response under accident conditions. The magnitude of possible fission product releases is also determined in phase B. However, no new accident consequence calculations are performed. Figs and tabs

  16. Psychosocial reconstruction inventory : a postdictal instrument in aircraft accident investigation.

    Science.gov (United States)

    1972-01-01

    A new approach to the investigation of aviation accidents has recently been initiated, utilizing a follow-on to the psychological autopsy. This approach, the psychosocial reconstruction inventory, enables the development of a dynamic, retrospective p...

  17. Assimilation of spatio-temporal distribution of radionuclides in early phase of radiation accident

    Czech Academy of Sciences Publication Activity Database

    Hofman, Radek; Šmídl, Václav

    2010-01-01

    Roč. 18, 7/8 (2010), s. 226-228 ISSN 1210-7085 R&D Projects: GA MŠk(CZ) 1M0572; GA ČR(CZ) GA102/07/1596 Institutional research plan: CEZ:AV0Z10750506 Keywords : decision support * early phase * Gaussian model * radioactive pollution transport Subject RIV: DL - Nuclear Waste, Radioactive Pollution ; Quality http://library.utia.cas.cz/separaty/2010/AS/hofman-assimilation of spatio-temporal distribution of radionuclides in early phase of radiation accident .pdf

  18. Recreational Boat Safety Collision Research - Phase 2. Volume 2. Collision Accident Investigations - 1975

    Science.gov (United States)

    1976-07-01

    Collisfon - .t tone person in a runabout wus pulling a skier and was turned, looking aft. He hit a johnboat. Thw ;ohnboat...based on the narrotive, the boat load distribution, and knowledge of the boat charactens;, .: From the load dstribution, it can be assumed that the boat...visibility) and the operator’s lack of knowledge of where he was and the characteristics of this harbor were the primary causes of this accident, along with

  19. THE FUNCTION AND PURPOSE OF AIRCRAFT ACCIDENT INVESTIGATION ACCORDING TO THE INTERNATIONAL AIR LAW

    Directory of Open Access Journals (Sweden)

    Atip Latipulhayat

    2015-10-01

    Full Text Available The main objective of an aircraft accident investigation is to find out the most probable causes of such accident. This represents a technical investigation in nature. At the practical level, however, this report is often used as legal evidence before the court. This paper argues that the main purpose of an aircraft acccident investigation is technical in nature and judicial investigation is carried out when the technical investigation found elements of crime that has been alleged as the most probable cause of the accident.   Menurut Konvensi Chicago 1944, tujuan utama suatu investigasi kecelakaan pesawat udara adalah untuk menemukan penyebab terjadinya kecelakaan tersebut. Jadi, investigasi ini bersifat teknis. Namun, laporan investigasi ini seringkali dijadikan alat bukti di pengadilan khususnya apabila faktor kesalahan manusia dianggap sebagai penyebab utama terjadinya kecelakaan tersebut. Investigasi teknis berubah menjadi investigasi yuridis. Tulisan ini berpendapat bahwa hakikat investigasi kecelakaan pesawat udara adalah bersifat teknis dan investigasi yuridis hanya akan dilakukan apabila laporan investigasi teknis menunjukkan adanya elemen kriminal.

  20. Investigating the Differences of Single-Vehicle and Multivehicle Accident Probability Using Mixed Logit Model

    Directory of Open Access Journals (Sweden)

    Bowen Dong

    2018-01-01

    Full Text Available Road traffic accidents are believed to be associated with not only road geometric feature and traffic characteristic, but also weather condition. To address these safety issues, it is of paramount importance to understand how these factors affect the occurrences of the crashes. Existing studies have suggested that the mechanisms of single-vehicle (SV accidents and multivehicle (MV accidents can be very different. Few studies were conducted to examine the difference of SV and MV accident probability by addressing unobserved heterogeneity at the same time. To investigate the different contributing factors on SV and MV, a mixed logit model is employed using disaggregated data with the response variable categorized as no accidents, SV accidents, and MV accidents. The results indicate that, in addition to speed gap, length of segment, and wet road surfaces which are significant for both SV and MV accidents, most of other variables are significant only for MV accidents. Traffic, road, and surface characteristics are main influence factors of SV and MV accident possibility. Hourly traffic volume, inside shoulder width, and wet road surface are found to produce statistically significant random parameters. Their effects on the possibility of SV and MV accident vary across different road segments.

  1. Oxidation behavior analysis of cladding during severe accidents with combined codes for Qinshan Phase II Nuclear Power Plant

    International Nuclear Information System (INIS)

    Shi, Xingwei; Cao, Xinrong; Liu, Zhengzhi

    2013-01-01

    Highlights: • A new verified oxidation model of cladding has been added in Severe Accident Program (SAP). • A coupled analysis method utilizing RELAP5 and SAP codes has been developed and applied to analyze a SA caused by LBLOCA. • Analysis of cladding oxidation under a SA for Qinshan Phase II Nuclear Power Plant (QSP-II NPP) has been performed by SAP. • Estimation of the production of hydrogen has been achieved by coupled codes. - Abstract: Core behavior at a high temperature is extremely complicated during transition from Design Basic Accident (DBA) to the severe accident (SA) in Light Water Reactors (LWRs). The progression of core damage is strongly affected by the behavior of fuel cladding (oxidation, embrittlement and burst). A Severe Accident Program (SAP) is developed to simulate the process of fuel cladding oxidation, rupture and relocation of core debris based on the oxidation models of cladding, candling of melted material and mechanical slumping of core components. Relying on the thermal–hydraulic boundary parameters calculated by RELAP5 code, analysis of a SA caused by the large break loss-of-coolant accident (LBLOCA) without mitigating measures for Qinshan Phase II Nuclear Power Plant (QSP-II NPP) was performed by SAP for finding the key sequences of accidents, estimating the amount of hydrogen generation and oxidation behavior of the cladding

  2. Investigation of air cleaning system response to accident conditions

    International Nuclear Information System (INIS)

    Andrae, R.W.; Bolstad, J.W.; Foster, R.D.; Gregory, W.S.; Horak, H.L.; Idar, E.S.; Martin, R.A.; Ricketts, C.I.; Smith, P.R.; Tang, P.K.

    1980-01-01

    Air cleaning system response to the stress of accident conditions are being investigated. A program overview and hghlight recent results of our investigation are presented. The program includes both analytical and experimental investigations. Computer codes for predicting effects of tornados, explosions, fires, and material transport are described. The test facilities used to obtain supportive experimental data to define structural integrity and confinement effectiveness of ventilation system components are described. Examples of experimental results for code verification, blower response to tornado transients, and filter response to tornado and explosion transients are reported

  3. Investigation of Qom Rural Area Water Network Accident in 2010 and Minimization Approaches of Accident Frequencies

    Directory of Open Access Journals (Sweden)

    Hossein Jafari Mansoorian

    2016-02-01

    Full Text Available Background & Aims of the Study : Accidents in water networks can lead to increase the uncounted water, costs of repair, maintenance, restoration and enter water contaminants to water network. The aim of this study is to survey the accidents of Qom rural water network and choose the right approaches to reduce the number of accidents. Materials & Methods: In this cross-sectional study, four sector of Qom province (Markazi, Dastjerd, Kahak and Qahan, were assessed over a period of 8 months (July – January 2010. This study was conducted through questionnaire of Ministry of Energy. Results: The total number of accidents was 763. The highest number of accidents in the four sectors was related to Markazi sector with 228 accidents. According to the time of the accident, the highest and lowest number of accident was related to September (19.7% and November (6.8%, respectively. According to the location of the accident on network, the highest and lowest number of accident was related to distribution network (64% and connections (17.5% and transmission pipe (18.34%, respectively. According to the type of the accident, the highest and lowest number of accident was related to breaking (47.8% and gasket failure (1.2%, respectively. Considering with the pipes’ material, the highest and lowest number of accident was related to polyethylene pipes (93% and steel and cast iron pipes (0.5%, 0.5%, respectively. Conclusions: Due to the high break rate of Polyethylene pipes, it is recommended to be placed in priority of leak detection and rehabilitation.   .

  4. Dutch in-depth accident investigation: first experiences and analysis results for motorcycles and mopeds

    NARCIS (Netherlands)

    Mooi, H.G.; Galliano, F.

    2001-01-01

    In September 1999 the Dutch Accident Research Team (DART) within TNO Automotive started with the in-depth investigation of traffic accidents. In this paper, the methodology, working procedures and experiences of the team are described and explained in detail. Furthermore, an elaborate description of

  5. Contribution to the description of the absorber rod behavior in severe accident conditions: An experimental investigation of the Ag–Zr phase diagram

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, A. [Institut de Radioprotection et Sureté Nucléaire, B.P. 3, 13115 Saint Paul-lez-Durance Cedex (France); Benigni, P.; Rogez, J.; Mikaelian, G. [IM2NP, UMR7334, CNRS, Aix-Marseille Université, Campus de Saint Jérôme, Avenue Escadrille Normandie Niémen – Case 251, 13397 Marseille Cedex 20 (France); Barrachin, M., E-mail: marc.barrachin@irsn.fr [Institut de Radioprotection et Sureté Nucléaire, B.P. 3, 13115 Saint Paul-lez-Durance Cedex (France); Lomello-Tafin, M.; Antion, C.; Janghorban, A. [Laboratoire SYMME, Polytech Annecy Chambéry – Université de Savoie, BP. 80439, 74944 Annecy-Le-Vieux Cedex (France); Fischer, E. [Université Grenoble Alpes, CMTC, SIMAP, 38000 Grenoble (France)

    2015-10-15

    Most pressurized water reactor (PWR) absorber rods are composed of an Ag–In–Cd (SIC) alloy inside a stainless steel (SS) cladding, themselves inserted into a Zircaloy tube. During a severe accident, the SIC alloy which melts at 800 °C does not practically interact with SS. However, the cladding failure results from its internal pressurization and its eutectic interaction with Zircaloy and occurs at temperatures greater than 1200 °C. The subsequent interaction between the SIC melt and the Zircaloy has a strong impact on the quantities of aerosols released into the primary circuit and finally on the iodine chemistry. Accurate knowledge of the Ag–Zr system is a prerequisite to address this issue. Within this concern, our experimental work is focused both on the investigation of the Ag–Zr phase diagram and on the determination of the thermodynamic properties of the intermetallic compounds in the system. Two intermetallic compounds (AgZr and AgZr{sub 2}) were identified. Ag–Zr cast alloys with a Ag/Zr ratio of 1:1 elaborated using an arc-melting furnace, once annealed, contained only a single phase AgZr. From metallographic observations, it appears that AgZr{sub 2} likely forms by the peritectic reaction from liquid and the bcc (βZr) phase. The partial enthalpies of solution of silver and zirconium in aluminum were experimentally determined at 723 °C in order to determine the enthalpies of formation of the intermetallic compounds. For silver solution calorimetry in aluminum bath, our measurements were successful and in agreement with the previous data. Yet, this study shows that liquid aluminum should not be used as a solvent for zirconium below 1000 °C.

  6. Investigation and evaluation for environmental impact at Fukushima Daiichi NPP accident

    International Nuclear Information System (INIS)

    2012-01-01

    In 2012, JNES investigated the weather data and the environmental monitoring data and constructed the method to specify contribution of the environmental impact from each plant based on the dose analysis result at Unit 1-3 of Fukushima Daiichi NPP accident. JNES calculated the dose rate in an accident early stage based on analysis of a monitoring data. Moreover, JNES evaluated the dose by additional release of the radioactive material in case of assuming the loss of coolant injection to a nuclear reactor by the request of NISA. (author)

  7. CFD investigating the air ingress accident for a HTGR simulation of graphite corrosion oxidation

    International Nuclear Information System (INIS)

    Ferng, Y.M.; Chi, C.W.

    2012-01-01

    Highlights: ► A CFD model is proposed to investigate graphite oxidation corrosion in the HTR-10. ► A postulated air ingress accident is assumed in this paper. ► Air ingress flowrate is the predicted result, instead of the preset one. ► O 2 would react with graphite on pebble surface, causing the graphite corrosion. ► No fuel exposure is predicted to be occurred under the air ingress accident. - Abstract: Through a compressible multi-component CFD model, this paper investigates the characteristics of graphite oxidation corrosion in the HTR-10 core under the postulated accident of gas duct rupture. In this accident, air in the steam generator cavity would enter into the core after pressure equilibrium is achieved between the core and the cavity, which is also called as the air ingress accident. Oxygen in the air would react with graphite on pebble surface, subsequently resulting in oxidation corrosion and challenging fuel integrity. In this paper, characteristics of graphite oxidation corrosion during the air ingress accident can be reasonably captured, including distributions of graphite corrosion amount on the different cross-sections, time histories of local corrosion amount at the monitoring points and overall corrosion amount in the core, respectively. Based on the transient simulation results, the corrosion pattern and its corrosion rate would approach to the steady-state conditions as the accident continuously progresses. The total amount of graphite corrosion during a 3-day accident time is predicted to be about 31 kg with the predicted asymptotic corrosion rate. This predicted value is less than that from the previous work of Gao and Shi.

  8. Study on Developments in Accident Investigation Methods: A Survey of the 'State-of-the-Art'

    International Nuclear Information System (INIS)

    Hollnagel, Erik; Speziali, Josephine

    2008-01-01

    The objective of this project was to survey the main accident investigation methods that have been developed since the early or mid-1990s. The motivation was the increasing frequency of accidents that defy explanations in simple terms, for instance cause-effect chains or 'human error'. Whereas the complexity of socio-technical systems is steadily growing across all industrial domains, including nuclear power production, accident investigation methods are only updated when their inability to account for novel types of accidents and incidents becomes inescapable. Accident investigation methods therefore typically lag behind the socio-technological developments by 20 years or more. The project first compiled a set of methods from the recognised scientific literature and in major major research and development programs, excluding methods limited to risk assessment, technological malfunctions, human reliability, and safety management methods. An initial set of 21 methods was further reduced to seven by retaining only prima facie accident investigation methods and avoiding overlapping or highly similar methods. The second step was to develop a set of criteria used to characterise the methods. The starting point was Perrow's description of normal accidents in socio-technical systems, which used the dimensions of coupling, going from loose to tight, and interactions, going from linear to complex. For practical reasons, the second dimension was changed to that of tractability or how easy it is to describe the system, where the sub-criteria are the level of detail, the availability of an articulated model, and the system dynamics. On this basis the seven selected methods were characterised in terms of the systems - or conditions - they could account for, leading to the following four groups: methods suitable for systems that are loosely coupled and tractable, methods suitable for systems that are tightly coupled and tractable, methods suitable for systems that are loosely

  9. Evaluation of total loss of feedwater accident/recovery phase and investigation of the associated EOP

    International Nuclear Information System (INIS)

    Bang, Young Seok; Seul, Kwang Won; Kim, Hho Jung

    1993-01-01

    To evaluate the sequence of event and the thermohydraulic behavior during total loss of feedwater accident and recovery procedure, a RELAP5/MOD3 calculation is performed and compared with the LOFT L9-1/L3-3 experiment. Also, the predictability of the code for the major thermohydraulic phenomena following the accident is assessed. As a result, it is found that a pressure control using the spray until the time the water level reaches the top of the pressurizer, an overpressure protection by pressurizer PORV, a recovery of the secondary heat removal capability by refilling steam generator, and an effective cooldown by the continued natural circulation can be perfomed without core uncovery. It is also found that the plantspecific evaluation is necessary to confirm the effectiveness of the current symptom-oriented emergency operating procedure, especially in an overpressure protection performance and steam generator recovery performance. (Author)

  10. Use of casual tree method for investigation of incidents and accidents involving radioactive materials

    International Nuclear Information System (INIS)

    Vasconcelos, Vanderley de; Senne Junior, Murillo; Marques, Raissa Oliveira

    2013-01-01

    There are many methodologies used for investigation of accidents to facilitate the search of the factors that cause these events in different areas of industry. These can be called proactive methods, if they are used before the occurrence of the events, or reactive methods that are applied after the occurrence of the incident or accident, and are used as a basis of information to prevent further events. One of these methods is the Causal Tree Method (CTM). The basic idea of this technique is that incidents and accidents result from variations in usual processes. These variations can be related to the individual, the task, the material or the environment. The tree starts with the end event (incident or accident) and works backwards. The facts relating to the end event are used in the construction of the causal tree. The end event is the starting point and only the facts that contributed to the incident or accident should be selected. The analyst has to identify and list the variations and then display them in the analytic tree, showing causal relations. The objective of this paper is to test the application of the CTM method in investigation of incidents and accidents involving radioactive materials, in order to evaluate its efficiency on finding the typical factors causing these events. (author)

  11. Hull loss accident model for narrow body commercial aircraft

    Directory of Open Access Journals (Sweden)

    Somchanok Tiabtiamrat

    2010-10-01

    Full Text Available Accidents with narrow body aircraft were statistically evaluated covering six families of commercial aircraft includingBoeing B737, Airbus A320, McDonnell Douglas MD80, Tupolev TU134/TU154 and Antonov AN124. A risk indicator for eachflight phase was developed based on motion characteristics, duration time, and the presence of adverse weather conditions.The estimated risk levels based on these risk indicators then developed from the risk indicator. Regression analysis indicatedvery good agreement between the estimated risk level and the accident ratio of hull loss cases per number of delivered aircraft.The effect of time on the hull loss accident ratio per delivered aircraft was assessed for B737, A320 and MD80. Equationsrepresenting the effect of time on hull loss accident ratio per delivered aircraft were proposed for B737, A320, and MD80,while average values of hull loss accident ratio per delivered aircraft were found for TU134, TU154, and AN 124. Accidentprobability equations were then developed for each family of aircraft that the probability of an aircraft in a hull loss accidentcould be estimated for any aircraft family, flight phase, presence of adverse weather factor, hour of day, day of week, monthof year, pilot age, and pilot flight hour experience. A simplified relationship between estimated hull loss accident probabilityand unsafe acts by human was proposed. Numerical investigation of the relationship between unsafe acts by human andfatality ratio suggested that the fatality ratio in hull loss accident was dominated primarily by the flight phase media.

  12. Standby after the Chernobyl accident

    International Nuclear Information System (INIS)

    1987-09-01

    The report is an investigation concerning strandby and actions by SKI (Swedish Nuclear Power Inspectorate) and SSI (National Institute of Radiation Protection) due to the Chernobyl reactor accident. It consists of a final report and two appendices. The final report is divided into two parts: 'I: Facts' and 'II: Analyzes'. 'Facts': The Swedish model for information: radio, press. Basic knowledge about ionizing radiation in the society. Resources for information. Need for information. Message forms for information. Announcements from the authorities in TV, radio, press, meeting, advertisements. Statements concerning the reactor accident and its consequences in Swedish mass media. How did the public recieve the information? 'Analyzis': Information responsibilities and policies. SSI information activities concerning radiologic accidents, conditions, methods and resources. Ditto for SKI, Swedish National Food Administration and the National Board of Agriculture. Appendix I: Information from authorities in the press three weeks after the Chernobyl accident: The material and the methods. The acute phase, the adoptation phase, the extension of the persective. What is said about the authorities in connection with Chernobyl? Appendix II: The fallout from Chernobyl, the authorities and the media coverage: The nationwide, regional and local coverage from radio and television. Ditto from the press. Topic and problem areas in reporting. Instructions from the authorities in media. Contribution in the media from people representing the authorities. Fallout in a chronologic perspective. (L.F.)

  13. The Fukushima accident

    International Nuclear Information System (INIS)

    Maqua, M.; Stueck, R.

    2012-01-01

    On 11 March 2011, the Tohoku earthquake and the subsequent tsunami hit the Japanese east coast, causing more than 15,000 fatalities. To this date, 3,000 people are still missing. The Fukushima Dai-ichi NPP was the nuclear installation that was most affected by the tsunami. The earthquake cut off the NPP from the national grid. About 45 minutes later, the tsunami flooded units 1-4 and led to core meltdown events with large releases for units 1, 2 and 3. Unit 4 had been in refuelling outage at that time and lost the cooling of the spent fuel pool for several days. Considerable hydrogen explosions occurred in units 1, 3 and 4. Shortly after the accident, TEPCO started to mitigate the consequences of the accident by providing external cooling to the reactors and by removing the radioactive debris from the site. Great emphasis was laid on effective radiation protection measures for the clean-up workers. Thus, up to now there has been no fatality due to the radiation caused by the Fukushima accident. The main steps of the accident sequences are described, taking into account the latest findings of investigations performed by TEPCO or on behalf of the regulatory body. The presentation focuses on the description of the status of the Fukushima Dai-ichi nuclear power plant and the future steps for cleaning-up the site. In the presentation, the major phases of the roadmap that TEPCO has developed for the clean-up are highlighted. The risks associated with the current plant status and the clean-up phases are described. Abstract the content of the manuscript in a few lines.

  14. Investigation of primary-to-secondary leakage accident on the PSB-VVER integral test facility

    International Nuclear Information System (INIS)

    Lipatov, I.A.; Dremin, G.I.; Galtchanskaya, S.A.; Chmal, I.I.; Moloshnikov, A.S.; Gorbunov, Y.S.; Antonova, A.I.; Elkin, I.V.

    2001-01-01

    The full text follows. The paper presents the main results from the test on primary-to-secondary leakage of 100 mm in equivalent diameter. The test was performed on the PSB-VVER integral test facility. PSB-VVER is a 4-loops scaled down model of primary system of NPP with VVER-1000 Russian type reactor. Volume - power scale is about 1/300 while elevation scale is 1/1. All components of the primary system of the reference NPP are modeled on PSB-VVER. Both passive (accumulators) and active (high and low pressure) ECCSs, pressurizer spray and relief circuits, feed water system and atmospheric dumping system (ADS) as well as the primary circuit gas remove emergency system are also simulated. The primary-to-secondary leakage was simulated using an external break line which connects the upper part of the hot header to SG water volume. The break line included a break nozzle (a cylindrical channel d = 5.8 mm, l/d = 10 with sharp inlet edge), quick-acting valve and two-phase mass flow rate measurement system. In addition loss of off-site power at the moment when a scram-signal is generated was assumed in the experiment. Thus the accident is to be considered as a beyond-design-basic one. The loss of off-site power results in the following: -main circulation pump shutdown; -pressurizer heaters switching off; -HPIS water cooling flow rate and number of points of water injection are reduced The study focuses on the adequacy of the associated accident management (AM) procedure developed by EDO ''GIDROPRESS'' as a General Designer of VVER-type reactors. The AM-procedure was adopted to the PSB-VVER test facility conditions using CATHARE (France) and DINAMIKA (Russia) codes analysis. The AM-procedure in PSB-VVER is as follows: after about 30 min of the onset of the accident, when the accident type and the localization of the SG affected become evident for the operator, he closes all the main steam isolation valves, inhibits the ADS actuation in the affected SG and begins to remove

  15. Type A Accident Investigation Board report on the January 17, 1996, electrical accident with injury in Technical Area 21 Tritium Science and Fabrication Facility Los Alamos National Laboratory. Final report

    International Nuclear Information System (INIS)

    1996-04-01

    An electrical accident was investigated in which a crafts person received serious injuries as a result of coming into contact with a 13.2 kilovolt (kV) electrical cable in the basement of Building 209 in Technical Area 21 (TA-21-209) in the Tritium Science and Fabrication Facility (TSFF) at Los Alamos National Laboratory (LANL). In conducting its investigation, the Accident Investigation Board used various analytical techniques, including events and causal factor analysis, barrier analysis, change analysis, fault tree analysis, materials analysis, and root cause analysis. The board inspected the accident site, reviewed events surrounding the accident, conducted extensive interviews and document reviews, and performed causation analyses to determine the factors that contributed to the accident, including any management system deficiencies. Relevant management systems and factors that could have contributed to the accident were evaluated in accordance with the guiding principles of safety management identified by the Secretary of Energy in an October 1994 letter to the Defense Nuclear Facilities Safety Board and subsequently to Congress

  16. Type A Accident Investigation Board report on the January 17, 1996, electrical accident with injury in Technical Area 21 Tritium Science and Fabrication Facility Los Alamos National Laboratory. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    An electrical accident was investigated in which a crafts person received serious injuries as a result of coming into contact with a 13.2 kilovolt (kV) electrical cable in the basement of Building 209 in Technical Area 21 (TA-21-209) in the Tritium Science and Fabrication Facility (TSFF) at Los Alamos National Laboratory (LANL). In conducting its investigation, the Accident Investigation Board used various analytical techniques, including events and causal factor analysis, barrier analysis, change analysis, fault tree analysis, materials analysis, and root cause analysis. The board inspected the accident site, reviewed events surrounding the accident, conducted extensive interviews and document reviews, and performed causation analyses to determine the factors that contributed to the accident, including any management system deficiencies. Relevant management systems and factors that could have contributed to the accident were evaluated in accordance with the guiding principles of safety management identified by the Secretary of Energy in an October 1994 letter to the Defense Nuclear Facilities Safety Board and subsequently to Congress.

  17. An analysis on human factor issues in criticality accident at a uranium processing plant. Investigation on human behavior contributing to the criticality accident. Interim report

    International Nuclear Information System (INIS)

    Sasou, Kuonihide; Goda, Hideki; Hirotsu, Yuko

    1999-01-01

    At 10:30 am, September 30th, 1999, a criticality accident occurred in a conversion building of a uranium processing plant in Tokai, Ibaraki prefecture. 69 people including 3 workers who then worked at the building, 3 fire fighters who dispatched to rescue them were exposed to the radiation. People with a 350 m-radius of the site were recommended to evacuate themselves from the region to a temporarily prepared evacuation center. And about one hundred thousand people within a 10 km-radius were also advised to stay inside of their home. Nuclear Safety Commission's Accident Investigation Committee is investigating causes of this accident and have been revealing that deviation from government-authorized processing method and negligence of its illegal procedure had contributed to the accident. The influence of this accident is expanding not only to the plant operating company, local people but also to Japanese nuclear power policy, the whole nuclear industry in Japan. Especially pervasion of 'Safety Culture' is strongly being required. This report analyses latent factors of some human behavior directly contributing to the criticality accident. It also mentions that 4 critical points on the poor climate for safety in the work place, the inadequate safety management, the unsuitable equipment and the production-biased company's policy are the latent factors of this accident. It also finds that the poor climate and the production-biased policy are the most important factors. It can be said that some people directly or indirectly having caused the accident are the victims of them. (author)

  18. Investigation of evaluation method for marine radiological impact during an accident

    International Nuclear Information System (INIS)

    2013-01-01

    In 2012, JNES investigated the evaluation method, long-term seawater and marine deposition for release and diffusion to the ocean at the accident, and marine impact assessment code, in Japan and overseas. Also, the foreign regulations for marine radiological impact (direct release to ocean from the facilities and fallout on marine, etc.) were investigated. Furthermore, the index (e.g., intervention level) at emergency control in USA and Europe were investigated. (author)

  19. Investigation of evaluation method for marine radiological impact during an accident

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    In 2012, JNES investigated the evaluation method, long-term seawater and marine deposition for release and diffusion to the ocean at the accident, and marine impact assessment code, in Japan and overseas. Also, the foreign regulations for marine radiological impact (direct release to ocean from the facilities and fallout on marine, etc.) were investigated. Furthermore, the index (e.g., intervention level) at emergency control in USA and Europe were investigated. (author)

  20. Investigation into the March 28, 1979 Three Mile Island accident by Office of Inspection and Enforcement (Investigative Report No. 50-320/79-10)

    International Nuclear Information System (INIS)

    1979-07-01

    On March 28, 1979, the Three Mile Island Unit 2 Nuclear Power Plant experienced the most severe accident in U.S. commercial nuclear power plant operating history. This report sets forth the facts concerning the events of the accident determined as a result of an investigation by the NRC Office of Inspection and Enforcement. The IE investigation is limited to two aspects of the accident: (1) Those related operational actions by the licensee during the period from before the initiating event until approximately 8:00 p.m., March 28, when primary coolant flow was re-established by starting a reactor coolant pump, and (2) Those steps taken by the licensee to control the release of radioactive material to the off-site environs, and to implement his emergency plan during the period from the initiation of the event to midnight, March 30. These investigation periods were selected because they include the licensee actions which most significantly affected the accident sequence and its results

  1. Stress in accident and post-accident management at Chernobyl

    International Nuclear Information System (INIS)

    Girard, P.; Dubreuil, G.H.

    1996-01-01

    The effects of the Chernobyl nuclear accident on the psychology of the affected population have been much discussed. The psychological dimension has been advanced as a factor explaining the emergence, from 1990 onwards, of a post-accident crisis in the main CIS countries affected. This article presents the conclusions of a series of European studies, which focused on the consequences of the Chernobyl accident. These studies show that the psychological and social effects associated with the post-accident situation arise from the interdependency of a number of complex factors exerting a deleterious effect on the population. We shall first attempt to characterise the stress phenomena observed among the population affected by the accident. Secondly, we will be presenting an anlysis of the various factors that have contributed to the emerging psychological and social features of population reaction to the accident and in post-accident phases, while not neglecting the effects of the pre-accident situation on the target population. Thirdly, we shall devote some initial consideration to the conditions that might be conducive to better management of post-accident stress. In conclusion, we shall emphasise the need to restore confidence among the population generally. (Author)

  2. Thermohydraulics in a high-temperature gas-cooled reactor primary loop during early phases of unrestricted core-heatup accidents

    International Nuclear Information System (INIS)

    Kroeger, P.G.; Colman, J.; Hsu, C.J.

    1983-01-01

    In High Temperature Gas Cooled Reactor (HTGR) siting considerations, the Unrestricted Core Heatup Accidents (UCHA) are considered as accidents of highest consequence, corresponding to core meltdown accidents in light water reactors. Initiation of such accidents can be, for instance, due to station blackout, resulting in scram and loss of all main loop forced circulation, with none of the core auxiliary cooling system loops being started. The result is a slow but continuing core heatup, extending over days. During the initial phases of such UCHA scenarios, the primary loop remains pressurized, with the system pressure slowly increasing until the relief valve setpoint is reached. The major objectives of the work described here were to determine times to depressurization as well as approximate loop component temperatures up to depressurization

  3. An investigation of awareness on the Fukushima nuclear accident and Radioactive contamination

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Jeong Chul; Song, Young Ju [Dept. of Consumer Safety, Korea Consumer Agency, Eumseong (Korea, Republic of)

    2016-05-15

    The objective of this study was to investigate Korean people's awareness about impact of the Fukushima nuclear power plant accident in Japan and radioactive contamination caused by it. The respondents of the survey were 600 adults who resided in the Seoul metropolitan area. The survey results show that the majority of respondents were concerned about impact of radiation leakage that might have an effect on our environment. They were worried about radioactive contamination of foodstuffs, particularly fishery products and preferred to acquire information through TV(49.8%) or the Internet(31.3%). Meanwhile, respondents mentioned that the information on the Fukushima nuclear accident and radioactive contamination had not been sufficient and they didn't know well about the follow-up measures of the government on the accident. Most respondents answered that information on radioactive contamination levels and safety of foods and environment was most needed. The results of this study could be useful to enhance awareness on radioactivity and improve risk communication on nuclear power plant accidents.

  4. Review of progress on enhanced accident tolerant fuel

    International Nuclear Information System (INIS)

    McCoy, K.; Dunn, B.; Kochendarfer, R.

    2015-01-01

    The accident at Fukushima has resulted in renewed interest in understanding the performance of nuclear power plants under accident conditions. Part of that interest is directed toward determining how to improve the performance of fuel during an accident that involves long exposures of the fuel to high temperatures. This paper describes the method being used by AREVA to select and evaluate approaches for improving the accident tolerance of nuclear fuel. The method involves starting with a large number of approaches that might enhance accident tolerance, and reviewing how well each approach satisfies a set of engineering requirements and goals. Among the approaches investigated we have the development of fuel pellets that contain a second phase to improve thermal conductivity, the use of molybdenum alloy tubing as fuel cladding, the use of oxidation-resistant coatings to zirconium cladding, and the use of nanoparticles in the coolant to improve heat transfer

  5. Internal Dose from Food and Drink Ingestion in the Early Phase after the Accident

    Science.gov (United States)

    Kawai, Masaki; Yoshizawa, Nobuaki; Hirakawa, Sachiko; Murakami, Kana; Takizawa, Mari; Sato, Osamu; Takagi, Shunji; Miyatake, Hirokazu; Takahashi, Tomoyuki; Suzuki, Gen

    2017-09-01

    Activity concentrations in food and drink, represented by water and vegetables, have been monitored continuously since the Fukushima Daiichi Nuclear Power Plant accident, with a focus on radioactive cesium. On the other hand, iodine-131 was not measured systematically in the early phase after the accident. The activity concentrations of iodine-131 in food and drink are important to estimate internal exposure due to ingestion pathway. When the internal dose from ingestion in the evacuation areas is estimated, water is considered as the main ingestion pathway. In this study, we estimated the values of activity concentrations in water in the early phase after the accident, using a compartment model as an estimation method. The model uses measurement values of activity concentration and deposition rate of iodine-131 onto the ground, which is calculated from an atmospheric dispersion simulation. The model considers how drinking water would be affected by radionuclides deposited into water. We estimated the activity concentrations of water on Kawamata town and Minamisouma city during March of 2011 and the committed effective doses were 0.08 mSv and 0.06 mSv. We calculated the transfer parameters in the model for estimating the activity concentrations in the areas with a small amount of measurement data. In addition, we estimated the committed effective doses from vegetables using atmospheric dispersion simulation and FARMLAND model in case of eating certain vegetables as option information.

  6. Investigation of Zircaloy-2 oxidation model for SFP accident analysis

    Energy Technology Data Exchange (ETDEWEB)

    Nemoto, Yoshiyuki, E-mail: nemoto.yoshiyuki@jaea.go.jp [Japan Atomic Energy Agency, 2-4 Shirakata, Ohaza, Tokai-mura, Naka-gun, Ibaraki, 319-1195 (Japan); Kaji, Yoshiyuki; Ogawa, Chihiro; Kondo, Keietsu [Japan Atomic Energy Agency, 2-4 Shirakata, Ohaza, Tokai-mura, Naka-gun, Ibaraki, 319-1195 (Japan); Nakashima, Kazuo; Kanazawa, Toru; Tojo, Masayuki [Global Nuclear Fuel – Japan Co., Ltd., 2-3-1, Uchikawa, Yokosuka-shi, Kanagawa, 239-0836 (Japan)

    2017-05-15

    The authors previously conducted thermogravimetric analyses on Zircaloy-2 in air. By using the thermogravimetric data, an oxidation model was constructed in this study so that it can be applied for the modeling of cladding degradation in spent fuel pool (SFP) severe accident condition. For its validation, oxidation tests of long cladding tube were conducted, and computational fluid dynamics analyses using the constructed oxidation model were proceeded to simulate the experiments. In the oxidation tests, high temperature thermal gradient along the cladding axis was applied and air flow rates in testing chamber were controlled to simulate hypothetical SFP accidents. The analytical outputs successfully reproduced the growth of oxide film and porous oxide layer on the claddings in oxidation tests, and validity of the oxidation model was proved. Influence of air flow rate for the oxidation behavior was thought negligible in the conditions investigated in this study. - Highlights: •An oxidation model of Zircaloy-2 in air environment was developed. •The oxidation model was validated by the comparison with oxidation tests using long cladding tubes in hypothetical spent fuel pool accident condition. •The oxidation model successfully reproduced the typical oxidation behavior in air.

  7. Early mortality estimates for different nuclear accidents. Final Phase I report, October 1977-April 1979

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, F.F.

    1979-08-01

    Several studies have previously been made of the number of early deaths which might be expected in a population exposed to a cloud of radionuclides which could result from a nuclear accident. These analyses, however, have been limited to one accident scenario or to exposures involving limited numbers of radionuclides. The purpose of this Phase I study was to examine the existing data on the early health effects of inhaled radioactive materials and determined what, if any, new studies were needed to make reasonable estimates of early mortality after exposure of a population to a cloud of radionuclides of any type. The approach used in the Phase I project was to analyze the data bases available on the health effects of inhaled radioactive materials and document those which were adequate and useful. Using these data, a computer based simulation model was developed depicting exposure to a radioactive aerosol, the dose to an individual exposed to the aerosol and the probability of dying from early effects.

  8. Early mortality estimates for different nuclear accidents. Final Phase I report, October 1977-April 1979

    International Nuclear Information System (INIS)

    Hahn, F.F.

    1979-08-01

    Several studies have previously been made of the number of early deaths which might be expected in a population exposed to a cloud of radionuclides which could result from a nuclear accident. These analyses, however, have been limited to one accident scenario or to exposures involving limited numbers of radionuclides. The purpose of this Phase I study was to examine the existing data on the early health effects of inhaled radioactive materials and determined what, if any, new studies were needed to make reasonable estimates of early mortality after exposure of a population to a cloud of radionuclides of any type. The approach used in the Phase I project was to analyze the data bases available on the health effects of inhaled radioactive materials and document those which were adequate and useful. Using these data, a computer based simulation model was developed depicting exposure to a radioactive aerosol, the dose to an individual exposed to the aerosol and the probability of dying from early effects

  9. Experimental investigation of a two-phase nozzle flow

    International Nuclear Information System (INIS)

    Kedziur, F.; John, H.; Loeffel, R.; Reimann, J.

    1980-07-01

    Stationary two-phase flow experiments with a convergent nozzle are performed. The experimental results are appropriate to validate advanced computer codes, which are applied to the blowdown-phase of a loss-of-coolant accident (LOCA). The steam-water experiments present a broad variety of initial conditions: the pressure varies between 2 and 13 MPa, the void fraction between 0 (subcooled) and about 80%, a great number of critical as well as subcritical experiments with different flow pattern is investigated. Additional air-water experiments serve for the separation of phase transition effects. The transient acceleration of the fluid in the LOCA-case is simulated by a local acceleration in the experiment. The layout of the nozzle and the applied measurement technique allow for a separate testing of blowdown-relevant, physical models and the determination of empirical model parameters, respectively. The measured quantities are essentially the mass flow rate, quality, axial pressure and temperature profiles as well as axial and radial density/void profiles obtained by a γ-ray absorption device. Moreover, impedance probes and a pitot probe are used. Observed phenomena like a flow contraction, radial pressure and void profiles as well as the appearance of two chocking locations are described, because their examination is rather instructive about the refinement of a program. The experimental facilities as well as the data of 36 characteristic experiments are documented. (orig.) [de

  10. Phase 2 : evaluation of the national crash experience : comparison of CARDfile national motor vehicle accident projections with projections from other data bases

    Science.gov (United States)

    1997-01-01

    The purpose of this Phase 2 Study is to compare national motor vehicle accident projections : made from the Crash Avoidance Research Data base (CARDfile) with national motor : vehicle accident projections made from other data bases. For the most part...

  11. Accidents and human factors

    International Nuclear Information System (INIS)

    Nishiwaki, Y.; Kawai, H.; Morishima, H.; Terano, T.; Sugeno, M.

    1984-01-01

    When the TMI accident occurred it was 4 a.m., an hour when the error potential of the operators would have been very high. The frequency of car and train accidents in Japan is also highest between 4 a.m. and 6 a.m. The error potential may be classified into five phases corresponding to the electroencephalogramic pattern (EEG). At phase 0, when the delta wave appears, a person is unconscious and in deep sleep; at phase I, when the theta wave appears, he is very tired, sleepy and subnormal; at phase II, when the alpha wave appears, he is normal, relaxed and passive; at phase III, when the beta wave appears, he is normal, clear-minded and active; at phase IV, when the strong beta or epileptic wave appears, he is hypernormal, excited and incapable of normal judgement. Should an accident occur at phase II, the brain condition may jump to phase IV. At this phase the error or accident potential is maximum. The response of the human brain to different types of noises and signals may vary somewhat for different individuals and for different groups of people. Therefore, the possibility that such differences in brain functions may influence the mental structure would be worthy of consideration in human factors and in the design of man-machine systems. Human reliability and performance would be affected by many factors: medical, physiological and psychological, etc. The uncertainty involved in human factors may not necessarily be probabilistic, but fuzzy. Therefore, it would be important to develop a theory by which both non-probabilistic uncertainties, or fuzziness, of human factors and the probabilistic properties of machines can be treated consistently. From the mathematical point of view, probabilistic measure is considered a special case of fuzzy measure. Therefore, fuzzy set theory seems to be an effective tool for analysing man-machine systems. To minimize human error and the possibility of accidents, new safety systems should not only back up man and make up for his

  12. Dutch National Plan combat nuclear accidents

    International Nuclear Information System (INIS)

    1988-01-01

    This document presents the Dutch National Plan combat nuclear accidents (NPK). Ch. 2 discusses some important starting points which are determining for the framework and the performance of the NPK, in particular the accident typology which underlies the plan. Also the new accident-classification system for the Dutch nuclear power plants, the standardization for the measures to be taken and the staging around nuclear power plants are pursued. In ch. 3 the legal framework of the combat nuclear accidents is described. In particular the Nuclear-power law, the Accident law and the Municipality law are pursued. Also the role of province and municipality are described. Ch. 4 deals with the role of the owner/licensee of the object where the accident occurs, in the combat of accident. In ch. 5 the structure of the nuclear-accident combat at national level is outlined, subdivided in alarm phase, combat phase and the winding-up phase. In ch.'s 6-12 these phases are elaborated more in detail. In ch.'s 10-13 the measures to be taken in nuclear accidents, are described. These measures are distinguished with regard to: protection of the population and medical aspects, water economy, drinking-water supply, agriculture and food supply. Ch. 14 describes the responsibility of the burgomaster. Ch.'s 15 and 16 present an overview of the personnel, material, procedural and juridical modifications and supplements of existing structures which are necessary with regard to the new and modified parts of the structure. Ch. 17 indicates how by means of the appropriate education and exercise it can be achieved that all personnel, services and institutes concerned possess the knowledge and experience necessary for the activities from the NKP to be executed as has been described. Ch. 18 contains a survey of activities to be performed and a proposal how these can be realized. (H.W.). figs.; tabs

  13. SIMBATH 1976-1992, seventeen years of experimental investigation of key issues concerned with severe reactor accidents

    International Nuclear Information System (INIS)

    Kaiser, A.; Peppler, W.; Will, H.

    1994-01-01

    The course of the initiating phase of severe fast reactor accidents is determined by early material motion. In simulation experiments (SIMBATH, simulation experiments in fuel element mock-ups with thermite) the behavior of single pin, 7 pin, 19 pin, 37 pin bundles undergoing meltdown was investigated. Thermite (Al + Fe 2 O 3 ) filled tubes were used to simulate fuel rods, while exothermal heat of the thermite reaction simulated the nuclear heat. The energy of 3.4 kJ per centimeter of pin length resulted in melting temperature of about 3200 K. SIMBATH is an out-of-pile experimental program with non-radioactive materials which provided the possibility to perform numerous experiments. The x-ray high speed photography used in the test enabled to visualise material motion and relocation qualitatively, and furthermore to gain quantitative results by additionally installed photodiodes. The results of the experiment serve as a database to evaluate physical phenomena relevant to be modelled by computer codes (SIMMER) and to verify the codes. The experiments were carried out either in stagnant sodium with an axial temperature gradient, or in flowing sodium, simulating unprotected loss of flow (ULOF) or unprotected transient overpower accidents (UTOP) conditions, respectively

  14. Proposal for computer investigation of LMFBR core meltdown accidents

    International Nuclear Information System (INIS)

    Boudreau, J.E.; Harlow, F.H.; Reed, W.H.; Barnes, J.F.

    1974-01-01

    The environmental consequences of an LMFBR accident involving breach of containment are so severe that such accidents must not be allowed to happen. Present methods for analyzing hypothetical core disruptive accidents like a loss of flow with failure to scram cannot show conclusively that such accidents do not lead to a rupture of the pressure vessel. A major deficiency of present methods is their inability to follow large motions of a molten LMFBR core. Such motions may lead to a secondary supercritical configuration with a subsequent energy release that is sufficient to rupture the pressure vessel. The Los Alamos Scientific Laboratory proposes to develop a computer program for describing the dynamics of hypothetical accidents. This computer program will utilize implicit Eulerian fluid dynamics methods coupled with a time-dependent transport theory description of the neutronic behavior. This program will be capable of following core motions until a stable coolable configuration is reached. Survey calculations of reactor accidents with a variety of initiating events will be performed for reactors under current design to assess the safety of such reactors

  15. Model development of SAS4A and investigation on the initiating phase consequences in LMFRs related with material motion

    International Nuclear Information System (INIS)

    Niwa, H.

    1994-01-01

    This paper focuses on an analytical aspect of the initiating phase scenario and consequences of postulated core disruptive accident in liquid-metal-cooled fast breeder reactors. An analytical code, SAS4A, has been developed at Argonne National Laboratory, and introduced to PNC. Improvement and validation effort have been performed for the mixed-oxide version of SAS4A at PNC. This paper describes firstly recent development of SAS4A's material motion related models briefly. A fission gas mass transfer model and solid fuel chunk jamming model are developed and introduced to SAS4A, and validated using CABRI-2 E13 experimental data. Secondly, an investigation of the mechanism of energetics in the initiating phase of an unprotected loss-of-flow accident has identified major control parameters which are intimately related to core design parameters and material motion phenomena. (author)

  16. Fuel and control rod failure behavior during degraded core accidents

    International Nuclear Information System (INIS)

    Chung, K.S.

    1984-01-01

    As a part of the pretest and posttest analyses of Light Water Reactor Source Term Experiments (STEP) which are conducted in the Transient Reactor Test (TREAT) facility, this paper investigates the thermodynamic and material behaviors of nuclear fuel pins and control rods during severe core degradation accidents. A series of four STEP tests are being performed to simulate the characteristics of the power reactor accidents and investigate the behavior of fission product release during these accidents. To determine the release rate of the fission products from the fuel pins and the control rod materials, information concerning the timing of the clad failure and the thermodynamic conditions of the fuel pins and control rods are needed to be evaluated. Because the phase change involves a large latent heat and volume expansion, and the phase change is a direct cause of the clad failure, the understanding of the phase change phenomena, particularly information regarding how much of the fuel pin and control rod materials are melted are very important. A simple energy balance model is developed to calculate the temperature profile and melt front in various heat transfer media considering the effects of natural convection phenomena on the melting and freezing front behavior

  17. Experimental investigation of void distribution in Suppression Pool during the initial blowdown period of a Loss of Coolant Accident using air–water two-phase mixture

    International Nuclear Information System (INIS)

    Rassame, Somboon; Griffiths, Matthew; Yang, Jun; Lee, Doo Yong; Ju, Peng; Choi, Sung Won; Hibiki, Takashi; Ishii, Mamoru

    2014-01-01

    Highlights: • Basic understanding of the venting phenomena in the SP during a LOCA was obtained. • A series of experiment is carried out using the PUMA-E test facility. • Two phases of experiments, namely, an initial and a quasi-steady phase were observed. • The maximum void penetration depth was experienced during the initial phase. - Abstract: During the initial blowdown period of a Loss of Coolant Accident (LOCA), the non-condensable gas initially contained in the BWR containment is discharged to the pressure suppression chamber through the blowdown pipes. The performance of Emergency Core Cooling System (ECCS) can be degraded due to the released gas ingestion into the suction intakes of the ECCS pumps. The understanding of the relevant phenomena in the pressure suppression chamber is important in analyzing potential gas intrusion into the suction intakes of ECCS pumps. To obtain the basic understanding of the relevant phenomena and the generic data of void distribution in the pressure suppression chamber during the initial blowdown period of a LOCA, tests with various blowdown conditions were conducted using the existing Suppression Pool (SP) tank of the integral test facility, called Purdue University Multi-Dimensional Integral Test Assembly for ESBWR applications (PUMA-E) facility, a scaled downcomer pipe installed in the PUMA-E SP, and air discharge pipe system. Two different diameter sizes of air injection pipe (0.076 and 0.102 m), a range of air volumetric flux (7.9–24.7 m/s), initial void conditions in an air injection pipe (fully void, partially void, and fully filled with water) and different air velocity ramp rates (1.0, 1.5, and 2.0 s) are used to investigate the impact of the blowdown conditions to the void distribution in the SP. Two distinct phases of experiments, namely, an initial and a quasi-steady phase were observed. The maximum void penetration depth was experienced during the initial phase. The quasi-steady phase provided less void

  18. An assessment of core wide coherency effects in the multichannel modeling of the initiating phase of a severe accident in a sodium fast reactor

    International Nuclear Information System (INIS)

    Guyot, M.; Gubernatis, P.; Suteau, C.; Le Tellier, R.; Lecerf, J.

    2014-01-01

    To consolidate the safety assessment for liquid-metal fast breeder reactors (LMFBRs), hypothetical core disruptive accident (HCDA) sequences have been extensively studied over the past decades. Numerous analyses of the so called initiating phase (or primary phase) of a HCDA have been made with the safety analysis system code SAS4A. The SAS4A accident analysis code requires that subassemblies or groups of subassemblies be represented together as independent channels. For simulating a severe accident sequence, a subassembly-to-channel assignment procedure has to be implemented to produce the consistent SAS4A input decks. Generally, one uses imposed criteria over relevant reactor parameters to determine the subassembly to- channel arrangement. The multiple-assembly-per-channel approach introduces core wide coherency effects, which can affect the reactivity balance and therefore the overall accident development. In this paper, a subassembly-to channel assignment procedure based on the subassembly power-to-flow ratio is presented and implemented to generate the SAS4A input decks over a range of parameter values. The corresponding SAS4A calculations have been performed on a large LMFBR. The purpose of the present series of calculations is to investigate the magnitude of errors encountered in the analysis of the initiating phase related to the subassembly-to-channel arrangement selection, by comparison with a one-subassembly-per-channel reference solution. It appears that a refinement in the channel arrangement substantially reduces core wide coherency effects. Analysis of the calculations also suggests that an accurate representation of the scenario requires the number of channels to be on approximately the same order of magnitude as the total number of subassemblies. Numerical results are examined to provide the reader with quantitative measurements of bias related to subassembly to- channel arrangement. (authors)

  19. Steering committee for the management of the post-accidental phase of a nuclear accident or of a radiological situation (CODIRPA) - Work-group nr 4. Response to health challenges after a radiological accident - Final report March 2011

    International Nuclear Information System (INIS)

    2011-03-01

    The first part of this report presents the context of preparation to the response to a radiological accident in France. It proposes a synthetic presentation of scenarios, of the different accident phases, of management principles based on areas and stakes as they are presented in the emergency phase exit guide. It also indicates public health challenges related to the different studied scenarios. The second part proposes a chronological synthesis of actions to be undertaken after an accident in order to face public health stakes. The third part proposes a detailed presentation of the implementation and sequence of actions to be undertaken depending on the studied scenarios: medical and psychological care, census, health risk assessment, health information

  20. Investigation of primary-to-secondary leakage accident on the PSB-VVER integral test facility

    Energy Technology Data Exchange (ETDEWEB)

    Lipatov, I.A.; Dremin, G.I.; Galtchanskaya, S.A.; Chmal, I.I.; Moloshnikov, A.S.; Gorbunov, Y.S.; Antonova, A.I. [Electrogorsk Research and Engineering Center, EREC, Moscow (Russian Federation); Elkin, I.V. [RRC ' ' Kurchatov Institute, Moscow (Russian Federation)

    2001-07-01

    The full text follows. The paper presents the main results from the test on primary-to-secondary leakage of 100 mm in equivalent diameter. The test was performed on the PSB-VVER integral test facility. PSB-VVER is a 4-loops scaled down model of primary system of NPP with VVER-1000 Russian type reactor. Volume - power scale is about 1/300 while elevation scale is 1/1. All components of the primary system of the reference NPP are modeled on PSB-VVER. Both passive (accumulators) and active (high and low pressure) ECCSs, pressurizer spray and relief circuits, feed water system and atmospheric dumping system (ADS) as well as the primary circuit gas remove emergency system are also simulated. The primary-to-secondary leakage was simulated using an external break line which connects the upper part of the hot header to SG water volume. The break line included a break nozzle (a cylindrical channel d = 5.8 mm, l/d = 10 with sharp inlet edge), quick-acting valve and two-phase mass flow rate measurement system. In addition loss of off-site power at the moment when a scram-signal is generated was assumed in the experiment. Thus the accident is to be considered as a beyond-design-basic one. The loss of off-site power results in the following: -main circulation pump shutdown; -pressurizer heaters switching off; -HPIS water cooling flow rate and number of points of water injection are reduced The study focuses on the adequacy of the associated accident management (AM) procedure developed by EDO ''GIDROPRESS'' as a General Designer of VVER-type reactors. The AM-procedure was adopted to the PSB-VVER test facility conditions using CATHARE (France) and DINAMIKA (Russia) codes analysis. The AM-procedure in PSB-VVER is as follows: after about 30 min of the onset of the accident, when the accident type and the localization of the SG affected become evident for the operator, he closes all the main steam isolation valves, inhibits the ADS actuation in the affected SG

  1. [Environmental investigation of ground water contamination at Wright- Patterson Air Force Base, Ohio]. Volume 4, Health and Safety Plan (HSP); Phase 1, Task 4 Field Investigation report: Draft

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This Health and Safety Plan (HSP) was developed for the Environmental Investigation of Ground-water Contamination Investigation at Wright-Patterson Air Force Base near Dayton, Ohio, based on the projected scope of work for the Phase 1, Task 4 Field Investigation. The HSP describes hazards that may be encountered during the investigation, assesses the hazards, and indicates what type of personal protective equipment is to be used for each task performed. The HSP also addresses the medical monitoring program, decontamination procedures, air monitoring, training, site control, accident prevention, and emergency response.

  2. Psychological and social impacts of post-accident situations: lessons from the Chernobyl accident

    International Nuclear Information System (INIS)

    Lochard, J.

    1996-01-01

    This paper presents the main features, from the psychological and social points of view, of the post-accident situation in the contaminated areas around Chernobyl. This is based on a series of surveys performed in the concerned territories of the CIS republics. The high level of stress affecting a large segment of the population is related to the perception of the situation by those living in a durably contaminated environment but also to the side-effects of some of the countermeasures adopted to mitigate the radiological consequences or to compensate the affected population. The distinction between the accident and the post-accident phase is enlarged to take into account the various phases characterizing the dynamics of the social response. Although the size of the catastrophe as well as the economic and political conditions that were prevailing at the time and after the accident have resulted in a maximal intensity of the reactions of the population, many lessons can be drawn for the management of potential post-accident situations. (author)

  3. Accident Investigation and Analysis - a roadmap for organisational learning -

    OpenAIRE

    Jacinto, Celeste

    2016-01-01

    1. Scope & Objective Scope: The investigation of occupational accidents has long been a matter of discussion, mainly among specialists, but its translation into company practice has only registered real growth on the turn of the new millennium, essentially as a natural consequence of the H&S (Health & Safety) emerging management systems. In Europe, the many H&S Directives have also played a central role in this field by bringing about new requirements and creating new needs. This trend has...

  4. Developing and assessing accident management plans for nuclear power plants

    International Nuclear Information System (INIS)

    Hanson, D.J.; Johnson, S.P.; Blackman, H.S.; Stewart, M.A.

    1992-07-01

    This document is the second of a two-volume NUREG/CR that discusses development of accident management plans for nuclear power plants. The first volume (a) describes a four-phase approach for developing criteria that could be used for assessing the adequacy of accident management plans, (b) identifies the general attributes of accident management plans (Phase 1), (c) presents a prototype process for developing and implementing severe accident management plans (Phase 2), and (d) presents criteria that can be used to assess the adequacy of accident management plans. This volume (a) describes results from an evaluation of the capabilities of the prototype process to produce an accident management plan (Phase 3) and (b), based on these results and preliminary criteria included in NUREG/CR-5543, presents modifications to the criteria where appropriate

  5. Study on Developments in Accident Investigation Methods: A Survey of the 'State-of-the-Art'

    Energy Technology Data Exchange (ETDEWEB)

    Hollnagel, Erik; Speziali, Josephine (Ecole des Mines de Paris, F-06904 Sophia Antipolis (France))

    2008-01-15

    The objective of this project was to survey the main accident investigation methods that have been developed since the early or mid-1990s. The motivation was the increasing frequency of accidents that defy explanations in simple terms, for instance cause-effect chains or 'human error'. Whereas the complexity of socio-technical systems is steadily growing across all industrial domains, including nuclear power production, accident investigation methods are only updated when their inability to account for novel types of accidents and incidents becomes inescapable. Accident investigation methods therefore typically lag behind the socio-technological developments by 20 years or more. The project first compiled a set of methods from the recognised scientific literature and in major major research and development programs, excluding methods limited to risk assessment, technological malfunctions, human reliability, and safety management methods. An initial set of 21 methods was further reduced to seven by retaining only prima facie accident investigation methods and avoiding overlapping or highly similar methods. The second step was to develop a set of criteria used to characterise the methods. The starting point was Perrow's description of normal accidents in socio-technical systems, which used the dimensions of coupling, going from loose to tight, and interactions, going from linear to complex. For practical reasons, the second dimension was changed to that of tractability or how easy it is to describe the system, where the sub-criteria are the level of detail, the availability of an articulated model, and the system dynamics. On this basis the seven selected methods were characterised in terms of the systems - or conditions - they could account for, leading to the following four groups: methods suitable for systems that are loosely coupled and tractable, methods suitable for systems that are tightly coupled and tractable, methods suitable for systems that

  6. An investigation of construction accidents in Rwanda: Perspectives from Kigali

    OpenAIRE

    Cokeham, M; Tutesigensi, A

    2013-01-01

    The International Labour Organization suggests that measuring accident statistics is the first step in reducing accident numbers. However, many developing countries, especially in sub-Saharan Africa, including Rwanda, do not record accident statistics. In response to this, a questionnaire survey of 130 construction workers was undertaken in Kigali, the capital of the Republic of Rwanda, to raise awareness of construction accidents within the country. The survey generated information about 482...

  7. MELCOR assessment of sequential severe accident mitigation actions under SGTR accident

    International Nuclear Information System (INIS)

    Choi, Wonjun; Jeon, Joongoo; Kim, Nam Kyung; Kim, Sung Joong

    2017-01-01

    The representative example of the severe accident studies using the severe accident code is investigation of effectiveness of developed severe accident management (SAM) strategy considering the positive and adverse effects. In Korea, some numerical studies were performed to investigate the SAM strategy using various severe accident codes. Seo et.al performed validation of RCS depressurization strategy and investigated the effect of severe accident management guidance (SAMG) entry condition under small break loss of coolant accident (SBLOCA) without safety injection (SI), station blackout (SBO), and total loss of feed water (TLOFW) scenarios. The SGTR accident with the sequential mitigation actions according to the flow chart of SAMG was simulated by the MELCOR 1.8.6 code. Three scenariospreventing the RPV failure were investigated in terms of fission product release, hydrogen risk, and the containment pressure. Major conclusions can be summarized as follows: (1) According to the flow chart of SAMG, RPV failure can be prevented depending on the method of RCS depressurization. (2) To reduce the release of fission product during the injecting into SGs, a temporary opening of SDS before the injecting into SGs was suggested. These modified sequences of mitigation actions can reduce the release of fission product and the adverse effect of SDS.

  8. An investigation of the closure problem applied to reactor accident source terms

    International Nuclear Information System (INIS)

    Brearley, I.R.; Nixon, W.; Hayns, M.R.

    1987-01-01

    The closure problem, as considered here, focuses attention on the question of when in current research programmes enough has been learned about the source terms for reactor accident releases. Noting that current research is tending to reduce the estimated magnitude of the aerosol component of atmospheric, accidental releases, several possible criteria for closure are suggested. Moreover, using the reactor accident consequence model CRACUK, the effect of gradually reducing the aerosol release fractions of a pressurized water reactor (PWR2) source term (as defined in the WASH-1400 study) is investigated and the implications of applying the suggested criteria to current source term research discussed. (author)

  9. Experimental investigation of stratified two-phase flows in the hot leg of a PWR for CFD validation

    Energy Technology Data Exchange (ETDEWEB)

    Vallee, Christophe; Lucas, Dirk [Helmholtz-Zentrum Dresden-Rossendorf (HZDR) e.V., Dresden (Germany). Inst. of Fluid Dynamics; Tomiyama, Akio [Kobe Univ. (Japan). Graduate School of Engineering; Murase, Michio [Institute of Nuclear Safety System Inc. (INSS), Fukui (Japan)

    2012-07-01

    Stratified two-phase flows were investigated in two different models of the hot leg of a pressurised water reactor (PWR) in order to provide experimental data for the development and validation of computational fluid dynamics (CFD) codes. Therefore, the local flow structure was visualised with a high-speed video camera. Moreover, one test section was designed with a rectangular cross-section to achieve optimum observation conditions. The phenomenon of counter-current flow limitation (CCFL) was investigated, which may affect the reflux condenser cooling mode in some accident scenarios. (orig.)

  10. Chernobyl accident and Denmark

    International Nuclear Information System (INIS)

    1986-12-01

    The report describes the Chernobyl accident and its consequences for Denmark in particular. It was commissioned by The Secretary of State for the Environment. Volume 2 contains copies of original documents issued by Danish authorities during the first accident phase and afterwards. Evaluations, monitoring data, press releases, legislation acts etc. are included. (author)

  11. Chernobyl accident and Danmark

    International Nuclear Information System (INIS)

    1986-12-01

    The report describes the Chernobyl accident and its consequences for Denmark in particular. It was commissioned by the Secretary of State for the Environment. Volume 1 contains copies of original documents issued by Danish authorities during the first accident phase and afterwards. Evaluations, monitoring data, press releases, legislation acts etc. are included. (author)

  12. Psychophysiological and other factors affecting human performance in accident prevention and investigation. [Comparison of aviation with other industries

    Energy Technology Data Exchange (ETDEWEB)

    Klinestiver, L.R.

    1980-01-01

    Psychophysiological factors are not uncommon terms in the aviation incident/accident investigation sequence where human error is involved. It is highly suspect that the same psychophysiological factors may also exist in the industrial arena where operator personnel function; but, there is little evidence in literature indicating how management and subordinates cope with these factors to prevent or reduce accidents. It is apparent that human factors psychophysological training is quite evident in the aviation industry. However, while the industrial arena appears to analyze psychophysiological factors in accident investigations, there is little evidence that established training programs exist for supervisors and operator personnel.

  13. Dose assessment for emergency workers in early phase of Fukushima Daiichi nuclear power plant accident

    Energy Technology Data Exchange (ETDEWEB)

    Sadeghi, Nahid; Ahangari, Rohollah; Kasesaz, Yaser; Noori-kalkhoran, O. [Nuclear Science and Technology Research Institute (NSTRI), Tehran (Iran, Islamic Republic of). Reactor Research School

    2017-11-15

    In the case of Fukushima Daiichi nuclear power plant (FNP) accident, the radioactive material was released from reactor units 1-3 and transported to short and long distances due to the atmospheric pathways-motions. Power sources for monitoring posts were lost due to earthquake and tsunami. Based on air dose rates and other data measured by monitoring cars, the amount of radioactive material released to the atmosphere from the power station was obtained. The atmospheric dispersion and the transport model used in the RASCAL code, estimate the radionuclide concentrations downwind, both in the air and on the ground due to deposition. The calculated concentrations are then used to estimate the projected doses for workers in vicinity of the accident area in the first minutes of accident time. For dose modeling, we assumed that each worker was 15 min in vicinity of FNP in accident situation, once without and once with protective clothes or respirator. According to Tokyo Electric Power Company (TEPCO) report six workers had received doses over 250 mSv (309 to 678 mSv) apparently due to inhaling Iodine-131 fume. In this paper the calculated dose results using RASCAL code shows that, if emergency workers who work in early phase of accident had not used protective equipment, for 15 min, inhalation doses from iodine in their thyroid gland up to 12 March afternoon would have been 520 mSv. A comparison between calculation results and TEPCO report shows that dose calculated virtually is nearly equal to TEPCO measurement results.

  14. Main results of the German risk study - phase B

    International Nuclear Information System (INIS)

    Heuser, F.W.

    1987-01-01

    To start the author introduces briefly some comments on main tasks and objectives of risk analysises which at least after the Chernobyl accident should be emphasized more explicitly. Following on some main results of the system - and accident event tree analysis of the German Risk Study, Phase B, are summarized. The second part of this paper deals with the analysis of core melt accidents performed in context of the study. Hetero investigations on the hydrogen problem and investigations on containment venting after a core melt accident will be discussed in more detail

  15. HERCA-WENRA Approach for a better cross-border coordination of protective actions during the early phase of a nuclear accident

    International Nuclear Information System (INIS)

    Bijlholt, Jette; Constantinou, Costas; Janssens, Augustin; ); Djounova, Jana; Fueloep, Nandor; Gering, Florian; Lieser, Joachim; Halldorsson, Oskar; Haywood, Stephanie; Hofer, Peter; Isnard, Olivier; Kuhlen, Johannes; Rother, Wolfram; Majerus, Patrick; Murith, Christophe; Nizamska, Marina; Rauber, Dominique; Rusch, Ronald; Stahl, Thorsten; Stephen, Patrick; Tkavc, Marjan; Van Gelder, Iris; Degueldre, Didier; Vandecasteele, Christian; Fuchsova, Dagmar; Genthon, Benedicte; Jamet, Philippe; Gilli, Ludivine; Lachaume, Jean-Luc; Perrin, Marie-Line; Xicluna, Delphine; Goerts, Peter; Greipl, Christian; Kuhlen, Johannes; Gurgui, Antoni; Mozas, Alfredo; Calvaro, Jose-Manuel Martin; Hohl, Harry; Rauber, Dominique; Hubbard, Lynn; Lindh, Karin; Majerus, Patrick; McMahon, Ciara; Metke, Eduard; Sokolikova, Adriana; Piller, Georges; Reiman, Lasse; Aaltonen, Hannele; Kuusi, Antero; Senior, David; Temple, Charles; Ugletveit, Finn; Holo, Eldri; Vandecasteele, Christian; Guzman, Olvido; Mueller-Ecker, Dieter

    2014-01-01

    The HERCA-WENRA Approach is an incentive approach that comprises the necessary mechanisms for countries to exchange adequate information and to achieve practical and operational solutions on a voluntary basis during an emergency leading to a uniform way of dealing with any serious radiological emergency situation, regardless of national border line, hence allowing for coherent and coordinated protective actions. The HERCA-WENRA Approach has the potential to improve the coherence of the response in case of a nuclear accident with impact on territories of other countries and to be used as guidance to implement Article 99.11 and 99.22 of the Euratom-BSS. It also fulfils recommendation No. 12.7.b of the so-known ENCO study and it further addresses some of the other recommendations. Content: General presentation of the HERCA WENRA Approach for a better cross-border coordination of protective actions during the early phase of a nuclear accident. Part I - HERCA-WENRA Approach for a better cross-border coordination of protective actions during the early phase of a nuclear accident. - General Mechanism. Part II - HERCA-WENRA Approach in case of a Severe Accident requiring Rapid Decisions for Protective Actions, while very little is known about the Situation

  16. Study on severe accidents and countermeasures for WWER-1000 reactors using the integral code ASTEC

    International Nuclear Information System (INIS)

    Tusheva, P.; Schaefer, F.; Altstadt, E.; Kliem, S.; Reinke, N.

    2011-01-01

    The research field focussing on the investigations and the analyses of severe accidents is an important part of the nuclear safety. To maintain the safety barriers as long as possible and to retain the radioactivity within the airtight premises or the containment, to avoid or mitigate the consequences of such events and to assess the risk, thorough studies are needed. On the one side, it is the aim of the severe accident research to understand the complex phenomena during the in- and ex-vessel phase, involving reactor-physics, thermal-hydraulics, physicochemical and mechanical processes. On the other side the investigations strive for effective severe accident management measures. This paper is focused on the possibilities for accident management measures in case of severe accidents. The reactor pressure vessel is the last barrier to keep the molten materials inside the reactor, and thus to prevent higher loads to the containment. To assess the behaviour of a nuclear power plant during transient or accident conditions, computer codes are widely used, which have to be validated against experiments or benchmarked against other codes. The analyses performed with the integral code ASTEC cover two accident sequences which could lead to a severe accident: a small break loss of coolant accident and a station blackout. The results have shown that in case of unavailability of major active safety systems the reactor pressure vessel would ultimately fail. The discussed issues concern the main phenomena during the early and late in-vessel phase of the accident, the time to core heat-up, the hydrogen production, the mass of corium in the reactor pressure vessel lower plenum and the failure of the reactor pressure vessel. Additionally, possible operator's actions and countermeasures in the preventive or mitigative domain are addressed. The presented investigations contribute to the validation of the European integral severe accidents code ASTEC for WWER-1000 type of reactors

  17. Radiological Emergency Preparedness after the Early Phase of an Accident : Focusing on an Air Contamination Event

    International Nuclear Information System (INIS)

    Jeong, Hyo Joon; Hwang, Won Tae; Kim, Eun Han; Han, Moon Hee

    2010-01-01

    Toxic materials in an urban area can be caused by a variety of events, such as accidental releases on industrial complexes, accidents during the transportation of hazardous materials and intentional explosions. Most governments around the world and their citizens have become increasingly worried about intentional accidents in urban area after the 911 terrorist attack in the United States of America. Even though there have been only a few attempted uses of Radiological Dispersal Devices (RDDs), accidental releases have occurred many times at commercial nuclear power plants and nuclear waste disposal sites. When an intentional release of radioactive materials occurs in an urban area, air quality for radioactive materials in the environment is of great importance to take action for countermeasures and environmental risk assessments. Atmospheric modeling is part of the decision making tasks and that it is particularly important for emergency managers as they often need to take actions quickly on very inadequate information(1). A simple model such as HOTSPOT required wind direction and source term would be enough to support the decision making in the early phase of an accident, but more sophisticated atmospheric modeling is required to adjust decontamination area and relocation etc after the early phase of an accidental event. In this study, we assume an explosion of 137 Cs using RDDs in the metropolitan area of Soul, South Korea. California Puff Model (CALPUFF) is used to calculate an atmospheric dispersion and transport for 137 Cs. Atmospheric dispersion and quantitative radiological risk analysis for 137 Cs were performed assuming an intentional explosion in the metropolitan area of Soul, South Korea after the early phase of emergency. These kinds of atmospheric modeling and risk analysis could provide a means for decision makers to take action on important issues such as the cleanup of the contaminated area and countermeasures to protect the public caused by

  18. Consequences of radioactive releases into the sea resulting from the accident at the Fukushima Dai-ichi nuclear power plant - Evolution of expert investigation according to the data available

    International Nuclear Information System (INIS)

    Laguionie, P.; Bailly Du Bois, P.; Boust, D.; Fievet, B.; Connan, O.; Garreau, P.; Charmasson, S.; Arnaud, M.; Duffa, C.; Champion, D.

    2012-01-01

    The accident at the Fukushima Dai-ichi Nuclear Power Plant (FDNPP) in March 2011 led to an unprecedented direct input of artificial radioactivity into the marine environment. The Institute for Radioprotection and Nuclear Safety was requested by the French authorities to investigate the radioecological impact of this input, in particular the potential contamination of products of marine origin used for human consumption. This article describes the close link between the responses provided and the availability of the data, as well as their nature and ability to meet the requirements of expert investigation. These responses were needed: (i) to evaluate the inputs of radionuclides into the marine environment, (ii) to understand their dispersion in seawater, and (iii) to estimate their transfer to the biota and sediments. Three phases can be distinguished which characterise these processes during the accident and post-accident periods. The first phase corresponds to an emergency phase during which no measurements were available on samples from the marine environment. It involved the formulation of hypotheses based solely on the expertise of the Institute for Radioprotection and Nuclear Safety. The second phase started when the Japanese authorities provided measurements of the concentrations of radionuclides in seawater. Although these data were not yet adapted to addressing the problems of radioecology, the scenarios could then be refined and the estimates developed in more detail. During the third phase, the accumulation of data over the course of time made it possible to study the phenomena in an appropriate way. The chronology of the events shows that it is essential to have (i) significant measurements of concentration from samples collected in the various matrices of the marine environment, regularly updated and sufficiently well-documented, (ii) samples of seawater collected at the earliest opportunity as close as possible to the damaged site to characterise the

  19. Safety investigation of team performance in accidents

    International Nuclear Information System (INIS)

    Petkov, G.; Todorov, V.; Takov, T.; Petrov, V.; Stoychev, K.; Vladimirov, V.; Chukov, I.

    2004-01-01

    The paper presents the capacities of the performance evaluation of teamwork (PET) method. Its practicability and efficiency are illustrated by retrospective human reliability analyse of the famous nuclear and maritime accidents. A quantitative assessment of operators' performance on the base of thermo-hydraulic (T/H) calculations and full-scope simulator data for set of NPP design basic accidents with WWER is demonstrated. The last data are obtained on the 'WWER-1000' full-scope simulator of Kozloduy NPP during the regular practical training of the operators' teams. An outlook on the 'evaluation system of main control room (MCR) operators' reliability' project, based on simulator data of operators' training is given

  20. Simulation of severe accidents in COTELS experiments

    International Nuclear Information System (INIS)

    Vasilev, Yu.S.; Zhdanov, V.S.; Kolodeshnikov, A.A.; Kadyrov, Kh. G.; Turkebaev, T.E.; Tsaj, K.V.; Suslov, E.E.

    1999-01-01

    At present, the issue of atomic reactor operation safety is of a great attention. It is evident that the accident accompanied with a core materials melting is an improbable event. To fully assess a hazard of a reactor use and enhance its safety, it is necessary to predict a possible accident progress and specify possible consequences of severe accidents and eliminating measures. In COTELS experiments, aimed at investigation of interaction of corium with concrete and water, the corium s imulator m elt is discharged on the concrete. The concrete erosion parameters, composition and rate of aerosol and gas escaping are recorded. The solidified melt and concrete fragments structure is studied after the testing, using the X-ray diffractometer DRON-3. This paper gives consideration to possible mechanisms of formation of uranium-containing and other phases of products of interaction of the corium melt with concrete and water

  1. Report from investigation committee on the accident at the Fukushima Nuclear Power Stations of Tokyo Electric Power Company

    International Nuclear Information System (INIS)

    Koshizuka, Seiichi

    2012-01-01

    Government's Investigation Committee on the Accident at Fukushima Nuclear Power Stations of Tokyo Electric Power Company published its final report on July 23, 2012. Results of investigation combined final report and interim report published on December 26, 2011. The author was head of accident accuse investigation team mostly in charge of site response, prior measure and plant behavior. This article reported author related technical investigation results focusing on site response and prior measures against tsunamis of units 1-3 of Fukushima Nuclear Power Stations. Misunderstanding of working state of isolation condenser of unit 1, unsuitability of alternative water injection at manual stop of high-pressure coolant injection (HPCI) system of unit 3 and improper prior measure against tsunami and severe accident were pointed out in interim report. Improper monitoring of suppression chamber of unit 2 and again unsuitable work for HPCI system of unit 3 were reported in final report. Thorough technical investigation was more encouraged to update safety measures of nuclear power stations. (T. Tanaka)

  2. National preparedness guide for exiting the emergency phase subsequent to a nuclear accident causing moderate, short-term release on French soil - working document, version 0, May 2010

    International Nuclear Information System (INIS)

    2010-05-01

    This National Guide provides basic explanations and methods to assist in drawing up a local plan for the emergency phase way-out, subsequent to a nuclear accident of moderate magnitude causing short-term (under 24 hours) radioactive release, which could possibly occur in France. The accident situations considered in this Guide have little likelihood of arising and are representative of environmental contamination accidents that might occur at French nuclear facilities covered by a special intervention plan (plan particulier d'intervention, PPI). Such accidents may cause environmental contamination warranting action for post-accident impact management within a range of ten to fifty kilometres from the accident site. To provide some perspective, the accidents considered here would be classified Levels 3, 4 or 5 (incidents or accidents causing release into the environment) on the INES scale customarily used to help the public and media to immediately understand the severity of an incident or accident in the nuclear field. This Guide was drawn up subsequently to the work carried out by the Steering Committee on Post- Accident Phase Management in the Event of a Nuclear Accident or Radiological Emergency Situation (CODIRPA), instituted by the French Nuclear Safety Authority (ASN) in June 2005, and in charge of setting out the basic principles underlying the management of nuclear post-accident situations. This version of the Guide shall be updated on the basis of the operating experience feedback received on its use. The Guide is a planning tool, intended for the Prefectures of department where a basic nuclear facility PPI has been instituted. Its purpose is to enable Prefects to plan and effectively conduct preparedness measures at the local level with the aim of winding down the emergency phase, actively involving all of the relevant actors for this purpose. The exit period from the emergency phase is defined as extending approximately one week from the end of the

  3. Large Break LOCA Accident Management Strategies for Accidents With Large Containment Leaks

    International Nuclear Information System (INIS)

    Sdouz, Gert

    2006-01-01

    The goal of this work is the investigation of the influence of different accident management strategies on the thermal-hydraulics in the containment during a Large Break Loss of Coolant Accident with a large containment leak from the beginning of the accident. The increasing relevance of terrorism suggests a closer look at this kind of severe accidents. Normally the course of severe accidents and their associated phenomena are investigated with the assumption of an intact containment from the beginning of the accident. This intact containment has the ability to retain a large part of the radioactive inventory. In these cases there is only a release via a very small leakage due to the un-tightness of the containment up to cavity bottom melt through. This paper represents the last part of a comprehensive study on the influence of accident management strategies on the source term of VVER-1000 reactors. Basically two different accident sequences were investigated: the 'Station Blackout'- sequence and the 'Large Break LOCA'. In a first step the source term calculations were performed assuming an intact containment from the beginning of the accident and no accident management action. In a further step the influence of different accident management strategies was studied. The last part of the project was a repetition of the calculations with the assumption of a damaged containment from the beginning of the accident. This paper concentrates on the last step in the case of a Large Break LOCA. To be able to compare the results with calculations performed years ago the calculations were performed using the Source Term Code Package (STCP), hydrogen explosions are not considered. In this study four different scenarios have been investigated. The main parameter was the switch on time of the spray systems. One of the results is the influence of different accident management strategies on the source term. In the comparison with the sequence with intact containment it was

  4. An outline of the interim report of the investigation committee on the accident at Fukushima Nuclear Power Stations

    International Nuclear Information System (INIS)

    Yoshioka, Hitoshi

    2012-01-01

    Interim report of the Investigation Committee of the Accident at Fukushima Nuclear Power Stations (NPSs) was published in December 26, 2011. The Japanese cabinet approved ten committee members including the author in May 2011. The committee interviewed more than 400 people over a total of 900 hours of hearings with about 40 staffs consisting of administrative team and three investigation teams of social system, root causes of the accident and countermeasures to prevent damage expansion of the accident. Interim report concluded 'the accident at Fukushima NPSs was caused by failures of every provision against reactor severe accident'. The failures appeared on (1) function of supervisory system for emergency response, (2) Fukushima Daiichi NPSs on-site disaster response especially related with operation of isolation condenser of unit 1 and high-pressure coolant injection system of unit 3, (3) Fukushima Daiichi NPSs off-site disaster response such the government failed to make use of data on the radioactive plumes released from the plant for evacuations, and (4) preparedness against tsunami and severe accident management. Possible worst or best simulation cases were also discussed. With no human support available on-site, workers might not have been able to prevent the meltdowns. Final report was due at the end of July 2012. (T. Tanaka)

  5. Use of PSA and severe accident assessment results for the accident management

    International Nuclear Information System (INIS)

    Jang, S. H.; Kim, H. G.; Jang, H. S.; Moon, S. K.; Park, J. U.

    1993-12-01

    The objectives for this study are to investigate the basic principle or methodology which is applicable to accident management, by using the results of PSA and severe accident research, and also facilitate the preparation of accidents management program in the future. This study was performed as follows: derivation of measures for core damage prevention, derivation of measures for accident mitigation, application of computerized tool to assess severe accident management

  6. Use of PSA and severe accident assessment results for the accident management

    Energy Technology Data Exchange (ETDEWEB)

    Jang, S H; Kim, H G; Jang, H S; Moon, S K; Park, J U [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    1993-12-15

    The objectives for this study are to investigate the basic principle or methodology which is applicable to accident management, by using the results of PSA and severe accident research, and also facilitate the preparation of accidents management program in the future. This study was performed as follows: derivation of measures for core damage prevention, derivation of measures for accident mitigation, application of computerized tool to assess severe accident management.

  7. Two-phase flow degradation on Fukushima-Daiichi Unit 2 RCIC turbine performance

    International Nuclear Information System (INIS)

    Lopez, Hector; Erkan, Nejdet; Okamoto, Koji

    2016-01-01

    After the Fukushima accident, several investigation reports, including experiments and simulations have been done for each of the affected units to completely understand the accident progression and use their results to improve the knowledge of severe accident management and the severe codes performance. In Unit 2, the major uncertainties are related with the reactor core isolation cooling (RCIC) system performance during the accident progression especially focused in the RCIC turbine, which is assumed to work in two-phase flow. The main objective of this study is to analyze the RCIC turbine performance under two-phase flow scenarios under the assumption that the power produced by the turbine is lower than expected due to the liquid phase in the flow. A degradation coefficient quantifying the turbine power reduction is developed as a function of the flow quality by using the sonic speed reduction at critical flow conditions principle obtained by applying the non-homogeneous equilibrium model (NHEM). The degradation coefficient was applied to RELAP/ScdapSIM severe accident code showing a drastic reduction of the turbine-generated power during two-phase flow and obtaining a RCIC system behavior closer to the Tokyo electric power company (TEPCO) investigation report conclusions. (author)

  8. Aspects Concerning The Rules And The Investigation Of Traffic Accidents As Work Accidents

    Science.gov (United States)

    Tarnu, Lucian Ioan

    2015-07-01

    When Romania joined the European Union, it was imposed that the Romanian legislation in the field of the security and health at work be in line with the European one. The concept of health as it is defined by the International Body of Health, refers to a good physical, mental and social condition. The improvement of the activity of preventing the traffic accidents as work accidents must have as basis the correct and accurate evaluation of risks of getting injured. The goal of the activity of prevention and protection is to ensure the best working conditions, the prevention of accidents and occupational diseases and the adjustment to the scientific and technological progress. In the road transport sector, as in any other sector, it is very important to pay attention to working conditions to ensure a workforce motivated and well qualified. Some features make it a more difficult sector risk management than other sectors. However, if one takes into account how it works in practice this sector and the characteristics of drivers and how they work routinely, risks, dangers and threats can be managed efficiently and with great success.

  9. Investigations on accidents with massive water ingress exemplified by the pebble bed reactor PNP-500

    International Nuclear Information System (INIS)

    Moormann, R.

    1986-01-01

    A computer code is used for analyses of massive water ingress accidents in the High-Temperature Gas Cooled Reactor concept PNP-500 with pebble bed core. The analyses are mainly focussed on graphite corrosion processes. For the investigated accidents a correct reactor shut down in assumed. The mass of water ingressing into the primary circuit is varied between 1000 and 7500 kg (i.e., up to hypothetical values). The dependence of accident consequences on parameters such as intensity and starting time of the afterheat removal system or kinetic values of the chemical processes is examined. The results show that even under pessimistic assumptions the extent of the graphite corrosion is relatively low; significant damaging of fuel elements or graphite components does not occur. A primary circuit depressurization, combined with local burning of water gas, would probably not affect the fission product retention potential of the (gastight) containment. Summing up, the risk caused by these accidents remains small. (orig.) [de

  10. Neural network-based expert system for severe accident management

    International Nuclear Information System (INIS)

    Klopp, G.T.; Silverman, E.B.

    1992-01-01

    This paper presents the results of the second phase of a three-phase Severe Accident Management expert system program underway at Commonwealth Edison Company (CECo). Phase I successfully demonstrated the feasibility of Artificial Neural Networks to support several of the objectives of severe accident management. Simulated accident scenarios were generated by the Modular Accident Analysis Program (MAAP) code currently in use by CECo as part of their Individual Plant Evaluations (IPE)/Accident Management Program. The primary objectives of the second phase were to develop and demonstrate four capabilities of neural networks with respect to nuclear power plant severe accident monitoring and prediction. The results of this work would form the foundation of a demonstration system which included expert system performance features. These capabilities included the ability to: (1) Predict the time available prior to support plate (and reactor vessel) failure; (2) Calculate the time remaining until recovery actions were too late to prevent core damage; (3) Predict future parameter values of each of the MAAP parameter variables; and (4) Detect simulated sensor failure and provide best-value estimates for further processing in the presence of a sensor failure. A variety of accident scenarios for the Zion and Dresden plants were used to train and test the neural network expert system. These included large and small break LOCAs as well as a range of transient events. 3 refs., 1 fig., 1 tab

  11. Safety-critical human factors issues derived from analysis of the TEPCO Fukushima Daiichi accident investigation reports

    International Nuclear Information System (INIS)

    Sakuda, Hiroshi; Takeuchi, Michiru

    2013-01-01

    The Fukushima Daiichi nuclear power plant accident on March 11, 2011 had a large impact both in and outside Japan, and is not yet concluded. After Tokyo Electric Power Co.'s (TEPCO's) Fukushima accident, electric power suppliers have taken measures to respond in the event that the same state of emergency occurs - deploying mobile generators, temporary pumps and hoses, and training employees in the use of this equipment. However, it is not only the “hard” problems including the design of equipment, but the “soft” problems such as organization and safety culture that have been highlighted as key contributors in this accident. Although a number of organizations have undertaken factor analysis of the accident and proposed issues to be reviewed and measures to be taken, a systematic overview about electric power suppliers' organization and safety culture has not yet been undertaken. This study is based on three major reports: the report by the national Diet of Japan Fukushima Nuclear Accident Independent Investigation Commission (the Diet report), the report by the Investigation Committee on the Accident at Fukushima Nuclear Power Stations of Tokyo Electric Power Company (Government report), and the report by the non-government committee supported by the Rebuild Japan Initiative Foundation (Non-government report). From these reports, the sections relevant to electric power suppliers' organization and safety culture were extracted. These sections were arranged to correspond with the prerequisites for the ideal organization, and 30 issues to be reviewed by electric power suppliers were extracted using brainstorming methods. It is expected that the identified issues will become a reference for every organization concerned to work on preventive measures hereafter. (author)

  12. Investigate the causes of transport and tramming accidents on coal mines.

    CSIR Research Space (South Africa)

    Rushworth, AM

    1999-03-01

    Full Text Available Transport and tramming accidents on coal mines in South Africa are a major component in the overall pattern of colliery accidents. Furthermore, there is now a widespread acceptance that human error is a common cause of failure in accident patterns...

  13. Nuclear Reactor RA Safety Report, Vol. 16, Maximum hypothetical accident

    International Nuclear Information System (INIS)

    1986-11-01

    Fault tree analysis of the maximum hypothetical accident covers the basic elements: accident initiation, phase development phases - scheme of possible accident flow. Cause of the accident initiation is the break of primary cooling pipe, heavy water system. Loss of primary coolant causes loss of pressure in the primary circuit at the coolant input in the reactor vessel. This initiates safety protection system which should automatically shutdown the reactor. Separate chapters are devoted to: after-heat removal, coolant and moderator loss; accident effects on the reactor core, effects in the reactor building, and release of radioactive wastes [sr

  14. Severe Accident Test Station Design Document

    Energy Technology Data Exchange (ETDEWEB)

    Snead, Mary A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Yan, Yong [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Howell, Michael [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Keiser, James R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Terrani, Kurt A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-09-01

    The purpose of the ORNL severe accident test station (SATS) is to provide a platform for evaluation of advanced fuels under projected beyond design basis accident (BDBA) conditions. The SATS delivers the capability to map the behavior of advanced fuels concepts under accident scenarios across various temperature and pressure profiles, steam and steam-hydrogen gas mixtures, and thermal shock. The overall facility will include parallel capabilities for examination of fuels and irradiated materials (in-cell) and non-irradiated materials (out-of-cell) at BDBA conditions as well as design basis accident (DBA) or loss of coolant accident (LOCA) conditions. Also, a supporting analytical infrastructure to provide the data-needs for the fuel-modeling components of the Fuel Cycle Research and Development (FCRD) program will be put in place in a parallel manner. This design report contains the information for the first, second and third phases of design and construction of the SATS. The first phase consisted of the design and construction of an out-of-cell BDBA module intended for examination of non-irradiated materials. The second phase of this work was to construct the BDBA in-cell module to test irradiated fuels and materials as well as the module for DBA (i.e. LOCA) testing out-of-cell, The third phase was to build the in-cell DBA module. The details of the design constraints and requirements for the in-cell facility have been closely captured during the deployment of the out-of-cell SATS modules to ensure effective future implementation of the in-cell modules.

  15. Severe Accident Test Station Design Document

    International Nuclear Information System (INIS)

    Snead, Mary A.; Yan, Yong; Howell, Michael; Keiser, James R.; Terrani, Kurt A.

    2015-01-01

    The purpose of the ORNL severe accident test station (SATS) is to provide a platform for evaluation of advanced fuels under projected beyond design basis accident (BDBA) conditions. The SATS delivers the capability to map the behavior of advanced fuels concepts under accident scenarios across various temperature and pressure profiles, steam and steam-hydrogen gas mixtures, and thermal shock. The overall facility will include parallel capabilities for examination of fuels and irradiated materials (in-cell) and non-irradiated materials (out-of-cell) at BDBA conditions as well as design basis accident (DBA) or loss of coolant accident (LOCA) conditions. Also, a supporting analytical infrastructure to provide the data-needs for the fuel-modeling components of the Fuel Cycle Research and Development (FCRD) program will be put in place in a parallel manner. This design report contains the information for the first, second and third phases of design and construction of the SATS. The first phase consisted of the design and construction of an out-of-cell BDBA module intended for examination of non-irradiated materials. The second phase of this work was to construct the BDBA in-cell module to test irradiated fuels and materials as well as the module for DBA (i.e. LOCA) testing out-of-cell, The third phase was to build the in-cell DBA module. The details of the design constraints and requirements for the in-cell facility have been closely captured during the deployment of the out-of-cell SATS modules to ensure effective future implementation of the in-cell modules.

  16. Investigating plutonium contamination in marine sediments off Fukushima coast following the Fukushima Dai-ichi Nuclear Power Plant accident

    International Nuclear Information System (INIS)

    Bu Wenting; Guo Qiuju; Zheng, Jian; Aono, Tatsuo; Tagami, Keiko; Uchida, Shigeo; Zhang, Jing; Yamada, Masatoshi

    2013-01-01

    The Fukushima Dai-ichi Nuclear Power Plant (FDNPP) accident has caused large amounts of anthropogenic radionuclides to be released into the atmosphere as well as directly discharged into the sea. To obtain the vertical distribution of Pu isotopes in marine sediments and to better assess the possible contamination from the FDNPP accident in the marine environment, activities of "2"3"9"+"2"4"0Pu and "2"4"1Pu, as well as the atom ratios of "2"4"0Pu/"2"3"9Pu and "2"4"1Pu/"2"3"9Pu, were investigated in a sediment core collected from the western North Pacific in July 2011. The observed vertical profile of "2"3"9"+"2"4"0Pu activities and "2"4"0Pu/"2"3"9Pu atom ratios showed no extra injection of Pu from the accident, indicating no immediate Pu contamination from the FDNPP accident in the marine sediments in the region investigated. (author)

  17. Investigations of postulated accident sequences for the Fort St. Vrain HTGR

    International Nuclear Information System (INIS)

    Ball, S.J.; Cleveland, J.C.; Conklin, J.C.; Hatta, M.; Sanders, J.P.

    1978-01-01

    The systems analysis capability of the ORNL HTGR Safety analysis research program includes a family of computer codes: an overall plant NSSS simulation (ORTAP), and detailed component codes for investigating core neutronic accidents (CORTAP), shutdown emergency-cooling accidents via a 3-dimensional core model (ORECA), and once-through steam generator transients (BLAST). The component codes can either be run independently or in the overall NSSS code. Verification efforts have consisted primarily of using existing Fort St. Vrain reactor dynamics data to compare against code predictions. Comparisons of core thermal conditions made for reactor scrams from power levels between 30 and 50% showed good agreement. An optimization program was used to rationalize the difference between the predicted and measured refueling region outlet temperatures, and, in general, excellent agreement was attained by adjustment of models and parameters within their uncertainty ranges. However, more work is required to establish a unique and valid set of models

  18. Identification and evaluation of PWR in-vessel severe accident management strategies

    International Nuclear Information System (INIS)

    Dukelow, J.S.; Harrison, D.G.; Morgenstern, M.

    1992-03-01

    This reports documents work performed the NRC/RES Accident Management Guidance Program to evaluate possible strategies for mitigating the consequences of PWR severe accidents. The selection and evaluation of strategies was limited to the in-vessel phase of the severe accident, i.e., after the initiation of core degradation and prior to RPV failure. A parallel project at BNL has been considering strategies applicable to the ex-vessel phase of PWR severe accidents

  19. Lateral car collisions : characteristics of lateral car collisions based on SWOV accident investigation.

    NARCIS (Netherlands)

    1979-01-01

    During 1976 and part of 1977 the Dutch institute for road safety research SWOV carried out the field work for an accident study involving passenger cars. The purpose of this crash injury investigation was to evaluate the influence of relevant crash safety factors (like safety belts and head

  20. Development of a national doctrine for the management of the post-accident phase of a radiological emergency situation

    International Nuclear Information System (INIS)

    Niel, J.Ch.; Godet, J.L.

    2008-01-01

    For several years, public Authorities have defined an organization for the management of emergency situations arising from an accident occurring at a nuclear installation. So far, the management of the risk arising from the post accident phase was, in itself, not explored with the same care. What so ever, no format policy on which the action of public Authority could be based is today available. The nuclear safety Authority (ASN), in relation with the other concerned departments, is now in charge, according to the above mentioned directive, to prepare and implement the necessary provisions to respond to a post accident situation. In dune 2005, ASN established the steering committee for the management of post nuclear or radiological emergency situations (CODIRPA). The definition of a national policy related to the management of the radiological risk during a post event situation having to integrate various organization aspects as: lifting of protection emergency provisions and rehabilitation of buildings, life in contaminated rural territories, agriculture and water, dose and radiological consequences, sanitary surveillance of victims and populations, indemnification, waste management of contaminated crops and soils, organization of public Authorities. During the 2. phase of CODIRPA work (2008-2009), the first elements of policy will be consolidated and new scenarios will be studied (one worsened scenario and one scenario with alpha emitting radionuclide). in parallel, a procedure for local actor's consultation should be elaborated. (authors)

  1. Main results of the german risk study, phase B

    International Nuclear Information System (INIS)

    Heuser, F.W.

    1988-01-01

    Work on the German Risk Study is under contract of the Federal Ministry of Research and Technology. The reference plant for the analysis is the Biblis nuclear power plant, Unit B, a KWU pressurized water reactor of the 1300 MWel class. The plant is in operation since 1976. First results on Phase A of the study have been published in 1979. Investigations on Phase B have been foreseen to endeepen the analysis. The principal purpose of these investigations is to improve and to optimize the plant's safety features on a more realistic basis. Main objectives of Phase B are: - Completeness of accident event tree analysis taking into account further accident initiating events. - Identification and analyses of accident management measures which are adequate to minimize accidental risk. - improvement of the analysis on an as far as possible realistic basis, thereby taking into account recent results of safety research. The paper deals with the most important results of the plant analyses (level 1 and level 2) which have been performed within the scope of Phases B of the study

  2. Frontal collisions between trucks and cars : the Dutch contribution to Phase A (Accident data and statistics) of EEVC Working Group 14 "Development of a test procedure for energy-absorbing front underrun protection systems for trucks".

    NARCIS (Netherlands)

    Schoon, C.C.

    1994-01-01

    This study investigates both the frequency and seriousness of particularly the frontal collisions between trucks and cars. The study is the Dutch contribution to phase A (accident data and statistics) of the research programme of the European Experimental Vehicles Committee (EEVC) Working Group 14.

  3. Utilization of the IAIA (Investigation and Analysis of Incidents and Accidents) method in the investigation of the P-36 platform accident; Utilizacao do metodo IAIA (Investigacao e Analise de Acidentes e Incidentes) na investigacao do acidente ocorrido na plataforma P-36

    Energy Technology Data Exchange (ETDEWEB)

    Teles, Marcus de Barros [ARCE - Agencia Reguladora de Servicos Publicos Delegados do Estado do Ceara, Fortaleza, CE (Brazil)

    2004-07-01

    In the beginning of XXI century the Brazilian oil industry report a big accident involving that which was the biggest petroleum platform of the world. With capacity production of 180.000 barrels a day and capacity compression of 7,2 million cubic meter a day of natural gas, the off-shore platform P-36 was situated on Roncador field, in Campos basin, operating in 1360 meters of water. As consequences, eleven deaths with irreparable traumas to the families, friends and worker partners, one billion dollars in prejudices to brazilian country, environmental damages by oil leak and injuries to PETROBRAS reputation in Brazil and in the world. The method of investigation and analysis of incidents and accidents - IAIA is very wide and its philosophy contain a lot of topics, since basic concepts, investigation actions, analysis action and diagnosis by the general kind of fail. Using this method and taking advantage from the report elaborated by the commission organized by ANP - Agencia Nacional do Petroleo and DPC - Diretoria de Portos e Costas, responsible for the investigation and analysis of the accident occurred with P-36, this paper identify the direct and indirect causes of the accident, in attempt to avoid new similar situations. (author)

  4. Study of Iodine Behavior in the Gas Phase during a Severe Accident

    International Nuclear Information System (INIS)

    Kim, Hanchul; Cho, Yeonghun; Ryu, Myunghyun

    2014-01-01

    Among the iodine species, the organic iodides produced from the reaction between iodine and organics such as paint, are not easily trapped by the filters during the containment venting following a severe accident. Korea Institute of Nuclear Safety (KINS) has been studying this issue, joining international research programs such as ISTP-EPICUR, OECDBIP and OECD-STEM. In the course of this study, a simple iodine model, RAIM (Radio-Active Iodine chemistry Model) has been developed (Oh et al., 2011), based on the IMOD methodology, and other previous studies. This paper deals with our recent activities on this study, including the development of the model for the iodine reactions in gas phase. Iodine reactions in gas phase were modeled and added to the RAIM code, taking into account several relevant reactions such as formation of ARP, iodine oxide, and organic iodides in gas phase. RAIM was then applied to analyze the S2-6-5-2 test for which iodine-loaded coupons were tested in gas phase. The analysis results show a reasonable estimation of volatile iodine concentration with the desorption rate constant of about 10 -6 s -1 , while those of the other iodine species overestimated for the whole period of the test. It reveals the need to determine appropriate values for the rate constants for formation of iodine oxides and organic iodides

  5. Criticality accident of nuclear fuel facility. Think back on JCO criticality accident

    International Nuclear Information System (INIS)

    Naito, Keiji

    2003-09-01

    This book is written in order to understand the fundamental knowledge of criticality safety or criticality accident of nuclear fuel facility by the citizens. It consists of four chapters such as critical conditions and criticality accident of nuclear facility, risk of criticality accident, prevention of criticality accident and a measure at an occurrence of criticality accident. A definition of criticality, control of critical conditions, an aspect of accident, a rate of incident, damage, three sufferers, safety control method of criticality, engineering and administrative control, safety design of criticality, investigation of failure of safety control of JCO criticality accident, safety culture are explained. JCO criticality accident was caused with intention of disregarding regulation. It is important that we recognize the correct risk of criticality accident of nuclear fuel facility and prevent disasters. On the basis of them, we should establish safety culture. (S.Y.)

  6. A “JUST CULTURE”? CONFLICTS OF INTEREST IN THE INVESTIGATION OF AVIATION ACCIDENTS

    Directory of Open Access Journals (Sweden)

    Tomasz BALCERZAK

    2017-03-01

    Full Text Available The sole purpose of air accident investigations should be the prevention of accidents and other incidents in the future, without apportioning blame or liability. A civil aviation safety system is based on feedback and lessons learned from accidents and incidents, while requiring the strict application of rules on confidentiality in order to ensure the availability of valuable sources of information in the future. Therefore, related data, especially sensitive safety information, should be protected in an appropriate manner. Information provided by an individual in the framework of a safety investigation should not be used against them, in full respect of constitutional principles, and national and international law. Each “involved person” who knows about an accident or serious incident should promptly notify the competent state authority for carrying out an investigation of the event. “Involved person” refers to one of the following: the owner; a member of the crew; the operator of the aircraft involved in an accident or serious incident; any person involved in the maintenance, design, manufacture of that aircraft or in the training of its crew; any person involved in air traffic control, providing flight information or providing airport services, which provided services for the aircraft concerned; staff of the national civil aviation authority; or staff of the European Aviation Safety Agency. In terms of the protection level of the organization (employer, employees who report an event or submit an application to the investigation cannot bear any prejudice from their employer because of information provided by the applicant. The protection does not cover (exclusions: infringement with wilful misconduct (direct intent, recklessness infringement; infringement committed by a clear and serious disregard of the obvious risks; and serious professional negligence, i.e., the failure to provide unquestionably duty of care required under the

  7. Experimental investigation of void distribution in suppression pool over the duration of a loss of coolant accident using steam–water two-phase mixture

    International Nuclear Information System (INIS)

    Rassame, Somboon; Griffiths, Matthew; Yang, Jun; Ju, Peng; Sharma, Subash; Hibiki, Takashi; Ishii, Mamoru

    2015-01-01

    Highlights: • Experiments were conducted to study void fraction distribution in SP during blowdown. • 3 Experimental phases, namely, an initial and a quasi-steady phase, chugging were observed. • The maximum void penetration depth was experienced during the initial phase. • The quasi-steady phase provided less void penetration depth with oscillations. • The chugging phase was experienced at the end of experimental phase. - Abstract: Studies are underway to determine if a large amount gas discharged through the downcomer pipes in the pressure suppression chamber during the blowdown of Loss of Coolant Accident (LOCA) can potentially be entrained into the Emergency Core Cooling System (ECCS) suction piping of BWR. This may result in degraded ECCS pumps performance which could affect the ability to maintain or recover the water inventory level in the Reactor Pressure Vessel (RPV) during a LOCA. Therefore, it is very important to understand the void behavior in the pressure suppression chamber during the blowdown period of a LOCA. To address this issue, a set of experiments is conducted using the Purdue University Multi-Dimensional Integral Test Assembly for ESBWR applications (PUMA-E) facility. The geometry of the test apparatus is determined based on the basic geometrical scaling analysis from a prototypical BWR containment (MARK I) with a consideration of downcomer size, downcomer water submergence depth and Suppression Pool (SP) water level. Several instruments are installed in the test facility to measure the required experimental data such as the steam mass flow rate, void fraction, pressure and temperature. In the experiments, sequential flows of air, steam–air mixture and pure steam-each with the various flow rate conditions are injected from the Drywell (DW) through a downcomer pipe in the SP. Eight tests with two different downcomer sizes, various initial gas volumetric fluxes at the downcomer, and two different initial non-condensable gas

  8. Accident statistics and the human-factor element.

    Science.gov (United States)

    Shuckburgh, J S

    1975-01-01

    The number of fatal accidents involving public transport aircraft has increased significantly in recent years and, because more and more "wide-bodied" aircraft have been coming into service, this has resulted in a rapid increase in the number of fatalities. A combined attack on the problem by all concerned with flight safety is required to improve the situation. The collection and analysis of aircraft accident data can contribute to safety in two ways; by giving an indication of where to concentrate future effort and by showing how successful past efforts have been. An analysis of worldwide accident statistics by phase of flight and causal factor show that the largest percentage of accidents occurs in the approach and landing phase and are caused by "pilot error". Further research is needed to find out why pilots make errors and how such errors can be eliminated.

  9. Investigation of the possible effect of the Chernobyl accident on Irish mortality rates

    International Nuclear Information System (INIS)

    Crowley, M.J.; Reville, W.J.

    1989-01-01

    Radioactive fallout from the Chernobyl accident reached Ireland in May 1986 and caused serious concern with regard to its possible effects on health. Reports of a large scale American study claim an almost immediate effect of Chernobyl fallout in terms of increased mortality rates. A study of Irish mortality rates reported a substantial increase in numbers of deaths during the three months immediately post-Chernobyl. The present study investigates whether there is a statistically significant basis for the reported increase in mortality in Ireland. No discernible evidence was found for increased mortality rates in Ireland during 1986, following the Chernobyl accident. The initial report of increased mortality rates was based on provisional mortality registration statistics and not on actual day to day data. (author)

  10. Joint research project WASA-BOSS: Further development and application of severe accident codes. Assessment and optimization of accident management measures. Project B: Accident analyses for pressurized water reactors with the application of the ATHLET-CD code; Verbundprojekt WASA-BOSS: Weiterentwicklung und Anwendung von Severe Accident Codes. Bewertung und Optimierung von Stoerfallmassnahmen. Teilprojekt B: Druckwasserreaktor-Stoerfallanalysen unter Verwendung des Severe-Accident-Codes ATHLET-CD

    Energy Technology Data Exchange (ETDEWEB)

    Jobst, Matthias; Kliem, Soeren; Kozmenkov, Yaroslav; Wilhelm, Polina

    2017-02-15

    Within the framework of the project an ATHLET-CD input deck for a generic German PWR of type KONVOI has been created. This input deck was applied to the simulation of severe accidents from the accident categories station blackout (SBO) and small-break loss-of-coolant accidents (SBLOCA). The complete accident transient from initial event at full power until the damage of reactor pressure vessel (RPV) is covered and all relevant severe accident phenomena are modelled: start of core heat up, fission product release, melting of fuel and absorber material, oxidation and release of hydrogen, relocation of molten material inside the core, relocation to the lower plenum, damage and failure of the RPV. The model has been applied to the analysis of preventive and mitigative accident management measures for SBO and SBLOCA transients. Therefore, the measures primary side depressurization (PSD), injection to the primary circuit by mobile pumps and for SBLOCA the delayed injection by the cold leg hydro-accumulators have been investigated and the assumptions and start criteria of these measures have been varied. The time evolutions of the transients and time margins for the initiation of additional measures have been assessed. An uncertainty and sensitivity study has been performed for the early phase of one SBO scenario with PSD (until the start of core melt). In addition to that, a code -to-code comparison between ATHLET-CD and the severe accident code MELCOR has been carried out.

  11. Psychical and social effects related to post-accident situations: some training of Chernobyl accident

    International Nuclear Information System (INIS)

    Lochand, J.

    1995-01-01

    Some preliminary considerations on the psychic and societal dimensions related to post-accident situations connected to large scale and heavy land contamination are presented. This is done with the objective of exploring the role that these dimensions could play in the elaboration of new radiological protection principles and concepts in order to restore confidence among affected populations after a nuclear accident. It is important to facilitate the return to normal or, at least, acceptable living conditions, as soon as reasonably achievable, and to prevent the possible emergence of a post-accident crisis. A scheme is proposed for understanding the dynamics of the various phases after an accident, taking into account the collective response to the consequences as well as, the response to the countermeasures. (Author)

  12. Improvement of Severe Accident Analysis Computer Code and Development of Accident Management Guidance for Heavy Water Reactor

    International Nuclear Information System (INIS)

    Park, Soo Yong; Kim, Ko Ryu; Kim, Dong Ha; Kim, See Darl; Song, Yong Mann; Choi, Young; Jin, Young Ho

    2005-03-01

    The objective of the project is to develop a generic severe accident management guidance(SAMG) applicable to Korean PHWR and the objective of this 3 year continued phase is to construct a base of the generic SAMG. Another objective is to improve a domestic computer code, ISAAC (Integrated Severe Accident Analysis code for CANDU), which still has many deficiencies to be improved in order to apply for the SAMG development. The scope and contents performed in this Phase-2 are as follows: The characteristics of major design and operation for the domestic Wolsong NPP are analyzed from the severe accident aspects. On the basis, preliminary strategies for SAM of PHWR are selected. The information needed for SAM and the methods to get that information are analyzed. Both the individual strategies applicable for accident mitigation under PHWR severe accident conditions and the technical background for those strategies are developed. A new version of ISAAC 2.0 has been developed after analyzing and modifying the existing models of ISAAC 1.0. The general SAMG applicable for PHWRs confirms severe accident management techniques for emergencies, provides the base technique to develop the plant specific SAMG by utility company and finally contributes to the public safety enhancement as a NPP safety assuring step. The ISAAC code will be used inevitably for the PSA, living PSA, severe accident analysis, SAM program development and operator training in PHWR

  13. Improvement of Severe Accident Analysis Computer Code and Development of Accident Management Guidance for Heavy Water Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Park, Soo Yong; Kim, Ko Ryu; Kim, Dong Ha; Kim, See Darl; Song, Yong Mann; Choi, Young; Jin, Young Ho

    2005-03-15

    The objective of the project is to develop a generic severe accident management guidance(SAMG) applicable to Korean PHWR and the objective of this 3 year continued phase is to construct a base of the generic SAMG. Another objective is to improve a domestic computer code, ISAAC (Integrated Severe Accident Analysis code for CANDU), which still has many deficiencies to be improved in order to apply for the SAMG development. The scope and contents performed in this Phase-2 are as follows: The characteristics of major design and operation for the domestic Wolsong NPP are analyzed from the severe accident aspects. On the basis, preliminary strategies for SAM of PHWR are selected. The information needed for SAM and the methods to get that information are analyzed. Both the individual strategies applicable for accident mitigation under PHWR severe accident conditions and the technical background for those strategies are developed. A new version of ISAAC 2.0 has been developed after analyzing and modifying the existing models of ISAAC 1.0. The general SAMG applicable for PHWRs confirms severe accident management techniques for emergencies, provides the base technique to develop the plant specific SAMG by utility company and finally contributes to the public safety enhancement as a NPP safety assuring step. The ISAAC code will be used inevitably for the PSA, living PSA, severe accident analysis, SAM program development and operator training in PHWR.

  14. Accident investigation board report on the May 14, 1997, chemical explosion at the Plutonium Reclamation Facility, Hanford Site,Richland, Washington - final report

    International Nuclear Information System (INIS)

    Gerton, R.E.

    1997-01-01

    On May 14, 1997, at 7:53 p.m. (PDT), a chemical explosion occur-red in Tank A- 109 in Room 40 of the Plutonium Reclamation Facility (Facility) located in the 200 West Area of the Hanford Site, approximately 30 miles north of Richland, Washington. The inactive processing Facility is part of the Plutonium Finishing Plant (PFP). On May 16, 1997, Lloyd L. Piper, Deputy Manager, acting for John D. Wagoner, Manager, U.S. Department of Energy (DOE), Richland Operations Office (RL), formally established an Accident Investigation Board (Board) to investigate the explosion in accordance with DOE Order 225. 1, Accident Investigations. The Board commenced its investigation on May 15, 1997, completed the investigation on July 2, 1997, and submitted its findings to the RL Manager on July 26, 1997. The scope of the Board's investigation was to review and analyze the circumstances of the events that led to the explosion; to analyze facts and to determine the causes of the accident; and to develop conclusions and judgments of need that may help prevent a recurrence of the accident. The scope also included the application of lessons learned from similar accidents within DOE. In addition to this detailed report, a companion document has also been prepared that provides a concise summary of the facts and conclusions of this report, with an emphasis on management issues (DOE/RL-97-63)

  15. The communication of radiological risk to populations exposed to a radiological accident: considerations concerning the accident in Goiania

    International Nuclear Information System (INIS)

    Curado, M.P.

    1996-01-01

    The main purpose of this paper is to describe the reactions of a population subjected to the effects of a radiological accident and receiving information about radiation effects for the first time. The behaviour of the victims during various phases of the accident is discussed. (author)

  16. Analysis of accidents at the LPR (Radiochemical Processes Laboratory)

    International Nuclear Information System (INIS)

    Kaufmann, F.; Boutet, L.I.

    1987-01-01

    Accidents are defined as not planned events that may result in the emission of significative quantities of radioactive materials to the environment. The pilot plant has been specifically designed to prevent this type of accidents but there still exists the possibility that one or more accidents can be produced during the plant life. In a first phase, the emission of radionuclides to the environment were evaluated for 13 credible accidents. In a second phase, by means of the calculation program SEDA, specially adapted to this purpose, the critical doses of critical group were calculated for each accident. Due to the small capacity of the pilot plant and the long cooling period of treated fuel, it is concluded that the radiological consequences for the external environment are of very small magnitude. In this way, without need of developing complex fault- or event-trees, it is shown that any of the accidents falls into the non acceptable zone of Farmer diagram. (Author)

  17. The influence of the natural environment on the radiological consequences of a nuclear accident

    International Nuclear Information System (INIS)

    Grauby, A.

    1989-01-01

    Much work has been done in the agri-food field on the evaluation of the health implications of a nuclear accident. Much less has been done on environmental dynamics. Research on the behaviour of radioactive deposits from the Chernobyl accident, however, has revealed the importance of natural conditions for the transfer of radionuclides in the environment. In particular, two phases have been observed. In the first, which lasts until a point of equilibrium is reached in the environment, radionuclides follow the water cycle. The second phase unfolds following the incorporation of ruthenium and cesium in soil and sediment. Certain environmental factors (natural ecosystems, relief, etc.) and the different meteorological conditions (climate and season) should be investigated in more detail. Better understanding of the effect of natural conditions could be used to predict, in time and space, any specific risks arising during nuclear accidents whether located near or far [fr

  18. Reactor hydrodynamics during the reflood phase of a loss-of-coolant accident

    International Nuclear Information System (INIS)

    Gay, R.R.

    1977-01-01

    The thermohydraulics of a nuclear reactor during the reflood phase of a hypothetical loss-of-coolant accident can be represented by moving control volume methodology in which six control volumes are used to represent the downcomer, lower plenum, and reactor core. The one-dimensional, homogeneous, equilibrium constitutive equations for two-phase steam/water flow are solved in each control volume and connecting junctions. One of the three core control volumes represents the quench region; it changes size and position based on the axial location of the clad quench temperature and the condensed liquid level in the flow channel. The lengths of the remaining two core control volumes are determined by the position of the quench region. Simulation of actual reflood experiments demonstrates that the methodology predicts reflood-like flow oscillations and reproduces the correct trends in experimental data. The moving control volume methodology has proven itself as a valid concept for reflood hydrodynamics, but further development of the existing EFLOD code is required for simulation of actual reflood experiments

  19. Investigation on the health effects and radioactive contamination after the Chernobyl accident

    International Nuclear Information System (INIS)

    Nagataki, Shigenobu; Yokoyama, Naokata

    1996-01-01

    In the screening of the thyroid diseases in the radiation cohort, it is essential to make correct diagnosis, to measure radiation dose in every subjects and to analyze the dose response relationship by the most appropriate statistical method. Based on experiences of atomic bomb survivors in Nagasaki, children around Chernobyl area were examined. In the Chernobyl accident, various investigations were supported by many international organizations and groups in the world. More than 80,000 children were screened in 5 diagnostic centers; Klincy in Russia, Mogilev and Gomel in Beralus and Kiev and Korosten in Ukraine. Children with thyroid cancer confirmed by histology were 2 in Mogilev. 19 in Gomel, 6 in Kiev, 5 in Korosten and 4 in Klincy until the end of 1994. The prevalence of thyroid cancer was remarkably high (lowest 100 and highest 1,000/million children), compared to the other parts of the world (0.2 to 5/millions/year). However, there was no dose response relationship between the prevalence of thyroid diseases and whole body 137 Cs radioactivity or the soil 137 Cs radio contaminated levels. Although a significant correlation between thyroid cancer and reconstructed thyroid 131 I dose was presented, there are no previous reports to prove that 131 I produces thyroid cancer in human. It is concluded about childhood thyroid cancer around Chernobyl that; it is confirmed that there are many children with thyroid cancer in Belarus, Ukraine and Russia and its diagnosis is correct. The increases of the incidence of thyroid cancer after the Chernobyl accident is probable confirmed. It is suspected but no confirmed that cause of thyroid cancer is the radioactive fallout of Chernobyl accident. Investigation on internal radiation and short lived isotopes along with 131 I may be important to elucidate the cause of thyroid cancer. (K.H.)

  20. An analysis of the Three Mile Island accident

    International Nuclear Information System (INIS)

    Brooks, G.L.; Siddal, E.

    1980-09-01

    Starting with a systematic analysis of the chain of events that took place during the Three Mile Island accident, the authors assess the significance of the four distinct phases of the accident. Inferences that can be drawn with respect to the safety of CANDU reactors are discussed. A rational reaction to the accident is suggested, and several factors are shown not to have played an important part, contrary to public impressions. The authors point out that over-reaction to the accident could detract from public safety. The Canadian response to the accident is discussed. (auth)

  1. Neutronics and thermal-hydraulics coupling: some contributions toward an improved methodology to simulate the initiating phase of a severe accident in a sodium fast reactor

    International Nuclear Information System (INIS)

    Guyot, Maxime

    2014-01-01

    This project is dedicated to the analysis and the quantification of bias corresponding to the computational methodology for simulating the initiating phase of severe accidents on Sodium Fast Reactors. A deterministic approach is carried out to assess the consequences of a severe accident by adopting best estimate design evaluations. An objective of this deterministic approach is to provide guidance to mitigate severe accident developments and re-criticalities through the implementation of adequate design measures. These studies are generally based on modern simulation techniques to test and verify a given design. The new approach developed in this project aims to improve the safety assessment of Sodium Fast Reactors by decreasing the bias related to the deterministic analysis of severe accident scenarios. During the initiating phase, the subassembly wrapper tubes keep their mechanical integrity. Material disruption and dispersal is primarily one-dimensional. For this reason, evaluation methodology for the initiating phase relies on a multiple-channel approach. Typically a channel represents an average pin in a subassembly or a group of similar subassemblies. In the multiple-channel approach, the core thermal-hydraulics model is composed of 1 or 2 D channels. The thermal-hydraulics model is coupled to a neutronics module to provide an estimate of the reactor power level. In this project, a new computational model has been developed to extend the initiating phase modeling. This new model is based on a multi-physics coupling. This model has been applied to obtain information unavailable up to now in regards to neutronics and thermal-hydraulics models and their coupling. (author) [fr

  2. KADIS: a program to analyse the disassembly phase of hypothetical accidents in LMFBRs

    International Nuclear Information System (INIS)

    Schmuck, P.; Jacobs, G.; Arnecke, G.

    1977-11-01

    The program KADIS models the disassembly phase during power excursions in LMFBR hypothetical accidents. KADIS is based on point kinetics in the neutronics part and on a 2-dimensional representation of the reactor core in the hydrodynamics part. The core is modeled as an ideal, compressible fluid which is heated up adiabatically during the excursion. KADIS was built up with the help of the VENUS program of Argonne National Laboratory. Several important features were added to the basic VENUS model. Therefore we give first a complete description of the mathematical models used. Secondly we provide the user with the necessary information to handle the input/output of KADIS. (orig.) [de

  3. Accidents - Chernobyl accident; Accidents - accident de Tchernobyl

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This file is devoted to the Chernobyl accident. It is divided in four parts. The first part concerns the accident itself and its technical management. The second part is relative to the radiation doses and the different contaminations. The third part reports the sanitary effects, the determinists ones and the stochastic ones. The fourth and last part relates the consequences for the other European countries with the case of France. Through the different parts a point is tackled with the measures taken after the accident by the other countries to manage an accident, the cooperation between the different countries and the groups of research and studies about the reactors safety, and also with the international medical cooperation, specially for the children, everything in relation with the Chernobyl accident. (N.C.)

  4. Investigation program on PWR-steel-containment behavior under accident conditions

    International Nuclear Information System (INIS)

    Krieg, R.; Eberle, F.; Goeller, B.; Gulden, W.; Kadlec, J.; Messemer, G.; Mueller, S.; Wolf, E.

    1983-10-01

    This report is a first documentation of the KfK/PNS activities and plans to investigate the behaviour of steel containments under accident conditions. The investigations will deal with a free standing spherical containment shell built for the latest type of a German pressurized water reactor. The diameter of the containment shell is 56 m. The minimum wall thickness is 38 mm. The material used is the ferritic steel 15MnNi63. According to the actual planning the program is concerned with four different problems which are beyond the common design and licensing practice: Containment behavior under quasi-static pressure increase up to containment failure. Containment behavior under high transient pressures. Containment oscillations due to earthquake loadings; consideration of shell imperfections. Containment buckling due to earthquake loadings. The investigation program consists of both theoretical and experimental activities including membrane tests allowing for very high plastic strains and oscillation tests with a thin-walled, high-accurate spherical shell. (orig.) [de

  5. Evaluation of severe accident environmental conditions taking accident management strategy into account for equipment survivability assessments

    International Nuclear Information System (INIS)

    Lee, Byung Chul; Jeong, Ji Hwan; Na, Man Gyun; Kim, Soong Pyung

    2003-01-01

    This paper presents a methodology utilizing accident management strategy in order to determine accident environmental conditions in equipment survivability assessments. In case that there is well-established accident management strategy for specific nuclear power plant, an application of this tool can provide a technical rationale on equipment survivability assessment so that plant-specific and time-dependent accident environmental conditions could be practically and realistically defined in accordance with the equipment and instrumentation required for accident management strategy or action appropriately taken. For this work, three different tools are introduced; Probabilistic Safety Assessment (PSA) outcomes, major accident management strategy actions, and Accident Environmental Stages (AESs). In order to quantitatively investigate an applicability of accident management strategy to equipment survivability, the accident simulation for a most likely scenario in Korean Standard Nuclear Power Plants (KSNPs) is performed with MAAP4 code. The Accident Management Guidance (AMG) actions such as the Reactor Control System (RCS) depressurization, water injection into the RCS, the containment pressure and temperature control, and hydrogen concentration control in containment are applied. The effects of these AMG actions on the accident environmental conditions are investigated by comparing with those from previous normal accident simulation, especially focused on equipment survivability assessment. As a result, the AMG-involved case shows the higher accident consequences along the accident environmental stages

  6. Joint research project WASA-BOSS: Further development and application of severe accident codes. Assessment and optimization of accident management measures. Project B: Accident analyses for pressurized water reactors with the application of the ATHLET-CD code

    International Nuclear Information System (INIS)

    Jobst, Matthias; Kliem, Soeren; Kozmenkov, Yaroslav; Wilhelm, Polina

    2017-02-01

    Within the framework of the project an ATHLET-CD input deck for a generic German PWR of type KONVOI has been created. This input deck was applied to the simulation of severe accidents from the accident categories station blackout (SBO) and small-break loss-of-coolant accidents (SBLOCA). The complete accident transient from initial event at full power until the damage of reactor pressure vessel (RPV) is covered and all relevant severe accident phenomena are modelled: start of core heat up, fission product release, melting of fuel and absorber material, oxidation and release of hydrogen, relocation of molten material inside the core, relocation to the lower plenum, damage and failure of the RPV. The model has been applied to the analysis of preventive and mitigative accident management measures for SBO and SBLOCA transients. Therefore, the measures primary side depressurization (PSD), injection to the primary circuit by mobile pumps and for SBLOCA the delayed injection by the cold leg hydro-accumulators have been investigated and the assumptions and start criteria of these measures have been varied. The time evolutions of the transients and time margins for the initiation of additional measures have been assessed. An uncertainty and sensitivity study has been performed for the early phase of one SBO scenario with PSD (until the start of core melt). In addition to that, a code -to-code comparison between ATHLET-CD and the severe accident code MELCOR has been carried out.

  7. [Investigation of emergency capacities for occupational hazard accidents in silicon solar cell producing enterprises].

    Science.gov (United States)

    Yang, D D; Xu, J N; Zhu, B L

    2016-11-20

    Objective: To investigate and analyze the influential factors of occupational hazard acci-dents, emergency facilities and emergency management in Silicon solar cell producing enterprises, then to pro-vide scientific strategies. Methods: The methods of occupationally healthy field investigating, inspecting of ven-tilation effectiveness, setup of emergency program and wearing chemical suit were used. Results: The mainly occupational hazard accidents factors in the process of Silicon solar cell producing included poisoning chemi-cals, high temperature, onizing radiation and some workplaces. The poisoning chemicals included nitric acid, hydrofluoric acid, sulfuric acid, hydrochloric acid, sodium hydroxide, potassium hydroxide, chlorine, phos-phorus oxychloride, phosphorus pentoxide, nitrogen dioxide, ammonia, silane, and so on; the workplaces in-cluded the area of producing battery slides and auxiliary producing area. Among the nine enterprises, gas detec-tors were installed in special gas supplying stations and sites, but the height, location and alarmvalues of gas detectors in six enterprises were not according with standard criteria; emergency shower and eyewash equip-ment were installed in workplaces with strong corrosive chemicals, but the issues of waste water were not solved; ventilation systems were set in the workplaces with ammonia and silane, but not qualified with part lo-cations and parameters in two enterprises; warehouses with materials of acid, alkali, chemical ammonia and phosphorus oxychloride were equipped with positive - pressure air respirator resuscitator and emergency cabi-nets, but with insufficient quantity in seven enterprises and expiration in part of products. The error rate of set-up emergency program and wearing chemical cloth were 30%~100% and 10%~30%, respectively. Among the nine enterprises, there were emergency rescue plans for dangerous chemical accidents, but without profession-al heatstroke and irradiation accident emergency plans

  8. Cavity Heating Experiments Supporting Shuttle Columbia Accident Investigation

    Science.gov (United States)

    Everhart, Joel L.; Berger, Karen T.; Bey, Kim S.; Merski, N. Ronald; Wood, William A.

    2011-01-01

    The two-color thermographic phosphor method has been used to map the local heating augmentation of scaled idealized cavities at conditions simulating the windward surface of the Shuttle Orbiter Columbia during flight STS-107. Two experiments initiated in support of the Columbia Accident Investigation were conducted in the Langley 20-Inch Mach 6 Tunnel. Generally, the first test series evaluated open (length-to-depth less than 10) rectangular cavity geometries proposed as possible damage scenarios resulting from foam and ice impact during launch at several discrete locations on the vehicle windward surface, though some closed (length-to-depth greater than 13) geometries were briefly examined. The second test series was designed to parametrically evaluate heating augmentation in closed rectangular cavities. The tests were conducted under laminar cavity entry conditions over a range of local boundary layer edge-flow parameters typical of re-entry. Cavity design parameters were developed using laminar computational predictions, while the experimental boundary layer state conditions were inferred from the heating measurements. An analysis of the aeroheating caused by cavities allowed exclusion of non-breeching damage from the possible loss scenarios being considered during the investigation.

  9. Using Occupational Safety and Health Administration accident investigations to study patterns in work fatalities.

    Science.gov (United States)

    Mendeloff, J M; Kagey, B T

    1990-11-01

    Investigations of fatalities by the Occupational Safety and Health Administration (OSHA) provide the most detailed available information about traumatic workplace deaths that are potentially related to violations of existing safety standards. Comparison of the number of such deaths investigated by OSHA from 1977 to 1986 with the comparable category of deaths reported to the Bureau of Labor Statistics Survey of Occupational Injuries and Illnesses indicates that the overall magnitudes have been roughly similar. The OSHA data contain more information than other sources and are especially valuable for analyses of fatalities at smaller workplaces. The OSHA data show that death rates decline sharply with establishment size; the inverted "U" pattern for lost workday injury rates is absent. Because accident investigations are conducted as part of an administrative system, the OSHA data can be influenced by changes in administrative policies. Changes over time in the percent of fatalities in which violations of OSHA standards were cited have clearly been influenced by changes in OSHA citation policy and thus do not provide a valid measure of the rate of violation-caused deaths. Realization of the epidemiological value of this data source depends upon a commitment from OSHA to maintain consistency in investigating accidents and to improve its data collection methods.

  10. Experimental investigations relevant for hydrogen and fission product issues raised by the Fukushima accident

    Directory of Open Access Journals (Sweden)

    Sanjeev Gupta

    2015-02-01

    Full Text Available The accident at Japan's Fukushima Daiichi nuclear power plant in March 2011, caused by an earthquake and a subsequent tsunami, resulted in a failure of the power systems that are needed to cool the reactors at the plant. The accident progression in the absence of heat removal systems caused Units 1-3 to undergo fuel melting. Containment pressurization and hydrogen explosions ultimately resulted in the escape of radioactivity from reactor containments into the atmosphere and ocean. Problems in containment venting operation, leakage from primary containment boundary to the reactor building, improper functioning of standby gas treatment system (SGTS, unmitigated hydrogen accumulation in the reactor building were identified as some of the reasons those added-up in the severity of the accident. The Fukushima accident not only initiated worldwide demand for installation of adequate control and mitigation measures to minimize the potential source term to the environment but also advocated assessment of the existing mitigation systems performance behavior under a wide range of postulated accident scenarios. The uncertainty in estimating the released fraction of the radionuclides due to the Fukushima accident also underlined the need for comprehensive understanding of fission product behavior as a function of the thermal hydraulic conditions and the type of gaseous, aqueous, and solid materials available for interaction, e.g., gas components, decontamination paint, aerosols, and water pools. In the light of the Fukushima accident, additional experimental needs identified for hydrogen and fission product issues need to be investigated in an integrated and optimized way. Additionally, as more and more passive safety systems, such as passive autocatalytic recombiners and filtered containment venting systems are being retrofitted in current reactors and also planned for future reactors, identified hydrogen and fission product issues will need to be coupled

  11. Steering committee for the management of the post-accidental phase of a nuclear accident or of a radiological situation (CODIRPA). Work group nr 4. Response to health challenges after a radiological accident - Stage report issue nr 2 of 2007 November 5; Synthesis of doctrinal elements and recommendations; Consultative meeting - February 2009; Final report March 2011; Report synthesis

    International Nuclear Information System (INIS)

    Bernier, Marie-Odile; Challeton-de Vathaire, Cecile; Catelinois, Olivier; Pirard, Philippe; Collignon, Albert; Corblet, Sibylle; Empereur Bissonnet, Pascal; Fite, Johanna; Mehl Auget, Isabelle; Fleutot, Jean-Baptiste; Gavel, Yves; Geis-Bonnemains, Nathalie; Geneau, Christian; Guagniere, Bertrand; Janin, Claire; Lang, Thierry; Marielle, Schmitt; N'Diaye, Bakhao; Raoul, Christophe; Ricoux, Christine; Schwoebel, Valerie; Telion, Caroline; Tillier, Claude; Verger, Pierre; Volant, Philippe

    2007-01-01

    A first report describes effects of radiological accidents on health, and possible scenarios (dose assessments, exposed population, health challenges), gives an overview of methods and arrangements used to count exposed populations and to assess received doses, and presents the foreseen reception centres. It describes the health management organisation (medical and psychological care of exposed population, public information), and reports an analysis of health risks associated with the accident. The next document contains a synthesis of doctrinal elements and recommendations regarding information acquisition, the management of health consequences of the accident, the assessment of the health impact. Propositions made by the work group to face health challenges are presented in a Power Point presentation. The final report addresses the context of preparation of the response to a radiological accident in France (studied accidents and scenarios, public health challenges), proposes a chronological synthesis of actions to be undertaken during a preparation phase, an emergency phase, a transition phase, and a long term phase), and a detailed presentation of main actions to be undertaken (medical and psychological care, reception centres, counting, health risk analysis, health information)

  12. Learning from nuclear accident experience

    International Nuclear Information System (INIS)

    Vaurio, J.K.

    1984-01-01

    Statistical procedures are developed to estimate accident occurrence rates from historical event records, to predict future rates and trends, and to estimate the accuracy of the rate estimates and predictions. Maximum likelihood estimation is applied to several learning models, and results are compared to earlier graphical and analytical estimates. The models are based on (1) the cumulative number of operating years, (2) the cumulative number of plants built, and (3) accidents (explicitly), with the accident rate distinctly different before and after an accident. The statistical accuracies of the parameters estimated are obtained in analytical form using the Fisher information matrix. Using data on core damage accidents in electricity producing plants, it is estimated that the probability for a plant to have a serious flaw has decreased from 0.1 to 0.01 during the developmental phase of the nuclear industry. At the same time the equivalent frequency of accidents has decreased from 0.04 per reactor year to 0.0004 per reactor year, partly due to the increasing population of plants. 10 references, 7 figures, 2 tables

  13. Flow behavior of volume-heated boiling pools: implications with respect to transition phase accident conditions

    International Nuclear Information System (INIS)

    Ginsberg, T.; Jones, O.C. Jr.; Chen, J.C.

    1979-01-01

    Observations of two-phase flow fields in single-component volume-heated boiling pools were made. Photographic observations, together with pool-average void fraction measurements, indicate that the churn-turbulent flow regime is stable for superficial vapor velocities up to nearly five times the Kutateladze dispersal limit. Within this range of conditions, a churn-turbulent drift flux model provides a reasonable prediction of the pool-average void fraction data. An extrapolation of the data to transition phase accident conditions suggests that intense boilup could occur where the pool-average void fraction would be >0.6 for steel vaporization rates equivalent to power levels >1% of nominal liquid-metal fast breeder reactor power density. The extended stability of bubbly flow to unusually large vapor fluxes and void fractions, observed in some experiments, is a major unresolved issue

  14. Swedish approach to information needs in severe accident situations

    Energy Technology Data Exchange (ETDEWEB)

    Soederman, E. (ES-Konsult AB, Stockholm (Sweden)); Karnik, P. (ES-Konsult AB, Stockholm (Sweden))

    1992-07-01

    In Sweden, systems for mitigating severe accidents have been installed at all plants and procedures have been implemented for accident management. This work has included the assessment of needs of information and the survivability of existing instrumentation during the various phases of an accident scenario. The approach has been pragmatic and based on existing knowledge of accident phenomenology and MAAP code calculations together with plant staff experience of detailed plant design and installation. During the early phases of accidents, which is defined to remain up to maximum fuel temperatures in the order of 800 C, the ordinary instrumentation is to a great extent useful. The reactor vessel level measurement is however identified to be weak in BWRs as soon as the core is partly uncovered. This has lead to the development of a Core Cooling Monitor. In later phases of accident scenarios, the general basis has been that no intrumentation inside the containment can survive. It has been analysed what information is strictly needed. It has been found that detailed information of the status inside the pressure vessel is of little importance after vessel penetration. Certain important information needs have been identified, that was not safely accessible from existing instrumentation. This had lead to complementary installations, using instruments inserted into the containment through protected guide tubes. Also for sampling of gas and water complementary installations have been made. (orig.)

  15. Swedish approach to information needs in severe accident situations

    International Nuclear Information System (INIS)

    Soederman, E.; Karnik, P.

    1992-01-01

    In Sweden, systems for mitigating severe accidents have been installed at all plants and procedures have been implemented for accident management. This work has included the assessment of needs of information and the survivability of existing instrumentation during the various phases of an accident scenario. The approach has been pragmatic and based on existing knowledge of accident phenomenology and MAAP code calculations together with plant staff experience of detailed plant design and installation. During the early phases of accidents, which is defined to remain up to maximum fuel temperatures in the order of 800 C, the ordinary instrumentation is to a great extent useful. The reactor vessel level measurement is however identified to be weak in BWRs as soon as the core is partly uncovered. This has lead to the development of a Core Cooling Monitor. In later phases of accident scenarios, the general basis has been that no intrumentation inside the containment can survive. It has been analysed what information is strictly needed. It has been found that detailed information of the status inside the pressure vessel is of little importance after vessel penetration. Certain important information needs have been identified, that was not safely accessible from existing instrumentation. This had lead to complementary installations, using instruments inserted into the containment through protected guide tubes. Also for sampling of gas and water complementary installations have been made. (orig.)

  16. Military Curricula for Vocational and Technical Education. Traffic Management and Accident Investigation, 17-8.

    Science.gov (United States)

    Air Force, Washington, DC.

    This teaching guide and student workbook for a postsecondary level course in traffic management and accident investigation is one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. Purpose stated for the 132-hour course is to expose students to…

  17. Gas phase chemistry and removal of CH3I during a severe accident

    International Nuclear Information System (INIS)

    Karhu, A.

    2001-01-01

    The purpose of this literature review was to gather valuable information on the behavior of methyl iodide on the gas phase during a severe accident. The potential of transition metals, especially silver and copper, to remove organic iodides from the gas streams was also studied. Transition metals are one of the most interesting groups in the context of iodine mitigation. For example silver is known to react intensively with iodine compounds. Silver is also relatively inert material and it is thermally stable. Copper is known to react with some radioiodine species. However, it is not reactive toward methyl iodide. In addition, it is oxidized to copper oxide under atmospheric conditions. This may limit the industrial use of copper.(au)

  18. Application of NUREG-1150 methods and results to accident management

    International Nuclear Information System (INIS)

    Dingman, S.; Sype, T.; Camp, A.; Maloney, K.

    1991-01-01

    The use of NUREG-1150 and similar probabilistic risk assessments in the Nuclear Regulatory Commission (NRC) and industry risk management programs is discussed. Risk management is more comprehensive than the commonly used term accident management. Accident management includes strategies to prevent vessel breach, mitigate radionuclide releases from the reactor coolant system, and mitigate radionuclide releases to the environment. Risk management also addresses prevention of accident initiators, prevention of core damage, and implementation of effective emergency response procedures. The methods and results produced in NUREG-1150 provide a framework within which current risk management strategies can be evaluated, and future risk management programs can be developed and assessed. Examples of the use of the NUREG-1150 framework for identifying and evaluating risk management options are presented. All phases of risk management are discussed, with particular attention given to the early phases of accidents. Plans and methods for evaluating accident management strategies that have been identified in the NRC accident management program are discussed

  19. Application of NUREG-1150 methods and results to accident management

    International Nuclear Information System (INIS)

    Dingman, S.; Sype, T.; Camp, A.; Maloney, K.

    1990-01-01

    The use of NUREG-1150 and similar Probabilistic Risk Assessments in NRC and industry risk management programs is discussed. ''Risk management'' is more comprehensive than the commonly used term ''accident management.'' Accident management includes strategies to prevent vessel breach, mitigate radionuclide releases from the reactor coolant system, and mitigate radionuclide releases to the environment. Risk management also addresses prevention of accident initiators, prevention of core damage, and implementation of effective emergency response procedures. The methods and results produced in NUREG-1150 provide a framework within which current risk management strategies can be evaluated, and future risk management programs can be developed and assessed. Examples of the use of the NUREG-1150 framework for identifying and evaluating risk management options are presented. All phases of risk management are discussed, with particular attention given to the early phases of accidents. Plans and methods for evaluating accident management strategies that have been identified in the NRC accident management program are discussed. 2 refs., 3 figs

  20. Severe accident analysis code Sampson for impact project

    International Nuclear Information System (INIS)

    Hiroshi, Ujita; Takashi, Ikeda; Masanori, Naitoh

    2001-01-01

    Four years of the IMPACT project Phase 1 (1994-1997) had been completed with financial sponsorship from the Japanese government's Ministry of Economy, Trade and Industry. At the end of the phase, demonstration simulations by combinations of up to 11 analysis modules developed for severe accident analysis in the SAMPSON Code were performed and physical models in the code were verified. The SAMPSON prototype was validated by TMI-2 and Phebus-FP test analyses. Many of empirical correlation and conventional models have been replaced by mechanistic models during Phase 2 (1998-2000). New models for Accident Management evaluation have been also developed. (author)

  1. Investigation of the management of the wastes from plant accident

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-08-15

    The accident in Fukushima Daiichi Nuclear Power Plant discharged large amount of radio-nuclides and contaminated wide areas in and out of the site. The decontamination, storage, treatment and disposal of generated wastes are now under planning. Though regulations for the radioactive wastes arisen from normal operation and decommissioning of nuclear facilities have been prepared, it is necessary to make amendment of those regulations to deal with wastes from the severe accident which may have much different features on nuclides contents, or possible accompanying hazardous chemical materials. Characteristics of wastes from accidents in foreign nuclear installations, and the treatment and the disposal of those wastes were surveyed by literature and radionuclide migration from the assumed temporally storage yards of the disaster debris was analyzed for consideration of future regulation. (author)

  2. Investigating of the effect of Biorhythm on work-related Accidents

    Directory of Open Access Journals (Sweden)

    F. Arab

    2014-07-01

    Conclusion: Findings of this research showed that bad and critical days of individuals’ biorhythms cycle influence the occurrence of accidents. Therefore, by training and increasing the knowledge of workers regarding biological cycle and its effects on mental, emotional and physical status, each person effects can make some changes to theire work plans during days that they do not feel well, physically or mentally, in order to prevent the likely accidents.

  3. PSB-VVER experimental and analytical investigation of station blackout accident in VVER-1000

    Energy Technology Data Exchange (ETDEWEB)

    Lipatov, I.A.; Kapustin, A.V.; Nikonov, S.M.; Rovnov, A.A.; Basov, A.V. [Electrogorsk Research and Engineering Centre (EREC), Moscow Region (Russian Federation); Elkin, I.V. [NSI RRC, Kurchatov Institute, Moscow (Russian Federation)

    2007-07-01

    In November 2003, an experiment simulating station blackout accident was carried out in the PSB-VVER integral test facility at the Electrogorsk Research and Engineering Centre (Russia). The purpose of the experiment was to provide missing data for code validation as well as to investigate the VVER thermohydraulics in the blackout conditions. The experiment covers a wide range of phenomena relating not only to transients but also to small break loss-of-coolant accidents. The data gained in the test has been used to assess the RELAP5/MOD3.3 code. In this paper, a special attention has been paid to the code assessment regarding the mixture level and entrainment in steam generator secondary side. The analysis of the recorded transient has shown that the calculation of the heat transfer on the secondary side of steam generators is very sensitive to the steam generator nodalization. (authors)

  4. Dental implant treatment following trauma: An investigation into the failure to complete Accident Compensation Corporation funded care.

    Science.gov (United States)

    Kennedy, R; Murray, C; Leichter, J

    2016-03-01

    Among other restorative strategies, the Accident Compensation Corporation (ACC) provides benefits for dental implant treatment to replace teeth lost as a result of trauma. While ACC has funded over 15,000 dental implants since 2002, the outcomes of this treatment and patient perceptions of this treatment have not been investigated. The aim of this study was to investigate the perceptions of the dental implant treatment outcomes and reasons for failure to complete restorative treatment in patients who had undergone trauma-related implant surgery funded by ACC between February 2006 and September 2009, but had not completed the prosthetic component of the treatment. A randomly selected sample of 399 patients, who had undergone dental implant surgery but not completed the crown restoration, was identified from the ACC database. These individuals were contacted by mail for expressions of interest and 181 clients were interviewed by telephone. Responses to open-ended questions were entered into an Excel spreadsheet and analysed using a general inductive technique. A common emergent theme was the high level of satisfaction expressed by participants with the implant process, however just under half of those responding felt they had been pushed into having implants and were given the impression that this was the only treatment ACC paid for. The cost of the prosthetic phase of the treatment and surgical complications were identified as the primary reasons why participants failed to complete the restorative phase of treatment, after completing the surgical phase. The results highlighted the need to better inform patients of their treatment options and to allow time for them to process this information before progressing with care. A patient decision tool may help to give greater ownership of the treatment options. Newly implemented protocols to assist dentists to better assess treatment needs may also assist in achieving improvements in perceived treatment outcomes for

  5. Daily variation of I-131, Cs-134 and Cs-137 activity concentrations in the atmosphere in Osaka during the early phase after the FDNPP accident

    International Nuclear Information System (INIS)

    Zijian Zhang; Kazuhiko Ninomiya; Naruto Takahashi; Atsushi Shinohara

    2015-01-01

    To investigate the time variations of radionuclides discharged from the Fukushima Daiichi nuclear power plants accident, we started collecting aerosol samples in Osaka, Japan, using a high-volume sampler from March 15 to May 1, 2011. Atmospheric radioactivity concentrations of I-131, Cs-134 and Cs-137 were measured with germanium semi-conductor detectors. Only I-131 was detected in the early phase and two Cs-134.137 peaks were found in Osaka in April. Using the HYSPLIT model, we concluded that direct transportation of the air mass from the Fukushima area was responsible for such events. (author)

  6. NASA Medical Response to Human Spacecraft Accidents

    Science.gov (United States)

    Patlach, Robert

    2011-01-01

    This slide presentation reviews NASA's role in the response to spacecraft accidents that involve human fatalities or injuries. Particular attention is given to the work of the Mishap Investigation Team (MIT), the first response to the accidents and the interface to the accident investigation board. The MIT does not investigate the accident, but the objective of the MIT is to gather, guard, preserve and document the evidence. The primary medical objectives of the MIT is to receive, analyze, identify, and transport human remains, provide assistance in the recovery effort, and to provide family Casualty Coordinators with latest recovery information. The MIT while it does not determine the cause of the accident, it acts as the fact gathering arm of the Mishap Investigation Board (MIB), which when it is activated may chose to continue to use the MIT as its field investigation resource. The MIT membership and the specific responsibilities and tasks of the flight surgeon is reviewed. The current law establishing the process is also reviewed.

  7. Severe accident tests and development of domestic severe accident system codes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    According to lessons learned from Fukushima-Daiichi NPS accidents, the safety evaluation will be started based on the NRA's New Safety Standards. In parallel with this movement, reinforcement of Severe Accident (SA) Measures and Accident Managements (AMs) has been undertaken and establishments of relevant regulations and standards are recognized as urgent subjects. Strengthening responses against nuclear plant hazards, as well as realistic protection measures and their standardization is also recognized as urgent subjects. Furthermore, decommissioning of Fukushima-Daiichi Unit1 through Unit4 is promoted diligently. Taking into account JNES's mission with regard to these SA Measures, AMs and decommissioning, movement of improving SA evaluation methodologies inside and outside Japan, and prioritization of subjects based on analyses of sequences of Fukushima-Daiichi NPS accidents, three viewpoints was extracted. These viewpoints were substantiated as the following three groups of R and D subjects: (1) Obtaining near term experimental subjects: Containment venting, Seawater injection, Iodine behaviors. (2) Obtaining mid and long experimental subjects: Fuel damage behavior at early phase of core degradation, Core melting and debris formation. (3) Development of a macroscopic level SA code for plant system behaviors and a mechanistic level code for core melting and debris formation. (author)

  8. Severe accident tests and development of domestic severe accident system codes

    International Nuclear Information System (INIS)

    2013-01-01

    According to lessons learned from Fukushima-Daiichi NPS accidents, the safety evaluation will be started based on the NRA's New Safety Standards. In parallel with this movement, reinforcement of Severe Accident (SA) Measures and Accident Managements (AMs) has been undertaken and establishments of relevant regulations and standards are recognized as urgent subjects. Strengthening responses against nuclear plant hazards, as well as realistic protection measures and their standardization is also recognized as urgent subjects. Furthermore, decommissioning of Fukushima-Daiichi Unit1 through Unit4 is promoted diligently. Taking into account JNES's mission with regard to these SA Measures, AMs and decommissioning, movement of improving SA evaluation methodologies inside and outside Japan, and prioritization of subjects based on analyses of sequences of Fukushima-Daiichi NPS accidents, three viewpoints was extracted. These viewpoints were substantiated as the following three groups of R and D subjects: (1) Obtaining near term experimental subjects: Containment venting, Seawater injection, Iodine behaviors. (2) Obtaining mid and long experimental subjects: Fuel damage behavior at early phase of core degradation, Core melting and debris formation. (3) Development of a macroscopic level SA code for plant system behaviors and a mechanistic level code for core melting and debris formation. (author)

  9. The accidents during shutdown conditions Temelin NPP

    International Nuclear Information System (INIS)

    Sykora, M.; Mlady, O.

    1996-01-01

    Two parallel activities oriented for the accidents during shutdown conditions are performed at Temelin NPP: Development of symptom based emergency operating procedures (EOPs) applicable for the accidents which could occur during operational modes 1 through 4; independent evaluation of plant safety as part of the Temelin Shutdown probabilistic assessment to define the accidents which could occur during mode 5 and 6 for which the EOPs must be extended. Both these activities are in progress now because Temelin plant is still in the construction phase

  10. Professional experience and traffic accidents/near-miss accidents among truck drivers.

    Science.gov (United States)

    Girotto, Edmarlon; Andrade, Selma Maffei de; González, Alberto Durán; Mesas, Arthur Eumann

    2016-10-01

    To investigate the relationship between the time working as a truck driver and the report of involvement in traffic accidents or near-miss accidents. A cross-sectional study was performed with truck drivers transporting products from the Brazilian grain harvest to the Port of Paranaguá, Paraná, Brazil. The drivers were interviewed regarding sociodemographic characteristics, working conditions, behavior in traffic and involvement in accidents or near-miss accidents in the previous 12 months. Subsequently, the participants answered a self-applied questionnaire on substance use. The time of professional experience as drivers was categorized in tertiles. Statistical analyses were performed through the construction of models adjusted by multinomial regression to assess the relationship between the length of experience as a truck driver and the involvement in accidents or near-miss accidents. This study included 665 male drivers with an average age of 42.2 (±11.1) years. Among them, 7.2% and 41.7% of the drivers reported involvement in accidents and near-miss accidents, respectively. In fully adjusted analysis, the 3rd tertile of professional experience (>22years) was shown to be inversely associated with involvement in accidents (odds ratio [OR] 0.29; 95% confidence interval [CI] 0.16-0.52) and near-miss accidents (OR 0.17; 95% CI 0.05-0.53). The 2nd tertile of professional experience (11-22 years) was inversely associated with involvement in accidents (OR 0.63; 95% CI 0.40-0.98). An evident relationship was observed between longer professional experience and a reduction in reporting involvement in accidents and near-miss accidents, regardless of age, substance use, working conditions and behavior in traffic. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Direction Committee for the management of the post-accident phase of a nuclear accident or of a radiological event (CODIRPA). Work group 'Hypotheses'. Contextual data and hypotheses to perform predictive assessments of radiological and dose consequences at the beginning of a post-accidental transition phase. 2007-2009 work report

    International Nuclear Information System (INIS)

    2010-01-01

    This report first describes how to examine the various exposure ways of a person present on a contaminated territory and formulates hypotheses for the calculation of radioactive doses received by ingestion of contaminated food products, by external irradiation, or by involuntary inhalation of radioactive particles. It identifies factors which may influence the contamination of food products, and gives recommendations for the predictive calculation of their contamination during the first month following the accident. It indicates available methods for the predictive assessment of radioactive deposits at the beginning of the transition phase. It proposes an expertise method to assess the post-accident consequences

  12. Investigating the multi-causal and complex nature of the accident causal influence of construction project features.

    Science.gov (United States)

    Manu, Patrick A; Ankrah, Nii A; Proverbs, David G; Suresh, Subashini

    2012-09-01

    Construction project features (CPFs) are organisational, physical and operational attributes that characterise construction projects. Although previous studies have examined the accident causal influence of CPFs, the multi-causal attribute of this causal phenomenon still remain elusive and thus requires further investigation. Aiming to shed light on this facet of the accident causal phenomenon of CPFs, this study examines relevant literature and crystallises the attained insight of the multi-causal attribute by a graphical model which is subsequently operationalised by a derived mathematical risk expression that offers a systematic approach for evaluating the potential of CPFs to cause harm and consequently their health and safety (H&S) risk implications. The graphical model and the risk expression put forth by the study thus advance current understanding of the accident causal phenomenon of CPFs and they present an opportunity for project participants to manage the H&S risk associated with CPFs from the early stages of project procurement. Copyright © 2011 Elsevier Ltd. All rights reserved.

  13. Utilization of DRUFAN 01/MOD 02 computer code for the depressurization phase analysis of a postulated loss of coolant accident in Angra 2/3 Nuclear Power Plants

    International Nuclear Information System (INIS)

    Austregesilo Filho, H.; Figueiredo, P.J.M.

    1985-08-01

    The DRUFAN 01/Mod 2 developed by Gesellschaft fur Reaktorsicherheit (GRS) mbh to simulate thermohydraulic behavior of the primary circuit of PWR reactors, during the despressurization phase and initial refilling phase of loss of coolant accidents by great ruptures, is presented. The program simulates the system to be analysed by control volumes-concentrated parameters model - and it is based on numerical solution of conservation equations for mass of water, mass of vapor, quantities of motion and energy, and on the control volume homogeneity hypothesis. The possibilities of thermodynamic disequilibrium, determining mass transfer between liquid and vapor phases assuming that one saturated phase, are considered. The process of computer code implantation in the Honeywell Bull 64 DPS 7 system at CNEN, the modifications done into the program and the application to the despressurization phase analysis of a loss of coolant accident at Angra-2 and Angra-3 reactors are considered. (M.C.K.) [pt

  14. Applicability of simplified methods to evaluate consequences of criticality accident using past accident data

    International Nuclear Information System (INIS)

    Nakajima, Ken

    2003-01-01

    Applicability of four simplified methods to evaluate the consequences of criticality accident was investigated. Fissions in the initial burst and total fissions were evaluated using the simplified methods and those results were compared with the past accident data. The simplified methods give the number of fissions in the initial burst as a function of solution volume; however the accident data did not show such tendency. This would be caused by the lack of accident data for the initial burst with high accuracy. For total fissions, simplified almost reproduced the upper envelope of the accidents. However several accidents, which were beyond the applicable conditions, resulted in the larger total fissions than the evaluations. In particular, the Tokai-mura accident in 1999 gave in the largest total specific fissions, because the activation of cooling system brought the relatively high power for a long time. (author)

  15. Nuclear power plant Severe Accident Research Plan

    International Nuclear Information System (INIS)

    Larkins, J.T.; Cunningham, M.A.

    1983-01-01

    The Severe Accident Research Plan (SARP) will provide technical information necessary to support regulatory decisions in the severe accident area for existing or planned nuclear power plants, and covers research for the time period of January 1982 through January 1986. SARP will develop generic bases to determine how safe the plants are and where and how their level of safety ought to be improved. The analysis to address these issues will be performed using improved probabilistic risk assessment methodology, as benchmarked to more exact data and analysis. There are thirteen program elements in the plan and the work is phased in two parts, with the first phase being completed in early 1984, at which time an assessment will be made whether or not any major changes will be recommended to the Commission for operating plants to handle severe accidents. Additionally at this time, all of the thirteen program elements in Chapter 5 will be reviewed and assessed in terms of how much additional work is necessary and where major impacts in probabilistic risk assessment might be achieved. Confirmatory research will be carried out in phase II to provide additional assurance on the appropriateness of phase I decisions. Most of this work will be concluded by early 1986

  16. Management of a radiological emergency. Experience feedback and post-accident management

    International Nuclear Information System (INIS)

    Dubiau, Ph.

    2007-01-01

    In France, the organization of crisis situations and the management of radiological emergency situations are regularly tested through simulation exercises for a continuous improvement. Past severe accidents represent experience feedback resources of prime importance which have led to deep changes in crisis organizations. However, the management of the post-accident phase is still the object of considerations and reflections between the public authorities and the intervening parties. This document presents, first, the nuclear crisis exercises organized in France, then, the experience feedback of past accidents and exercises, and finally, the main aspects to consider for the post-accident management of such events: 1 - Crisis exercises: objectives, types (local, national and international exercises), principles and progress, limits; 2 - Experience feedback: real crises (major accidents, other recent accidental situations or incidents), crisis exercises (experience feedback organization, improvements); 3 - post-accident management: environmental contamination and people exposure, management of contaminated territories, management of populations (additional protection, living conditions, medical-psychological follow up), indemnification, organization during the post-accident phase; 4 - conclusion and perspectives. (J.S.)

  17. IRSN-Ancli seminar on the post-accident context

    International Nuclear Information System (INIS)

    Didier, Damien; Leroyer, Veronique; Gariel, Jean-Christophe; Meier, Christine; Petitfrere, Michael; Meraux-Netillard, Isabelle; Lerouxel, Roland; Gandouen, Gael; Boutin, Dominique; Charre, Jean-Pierre; Noe, Maite; Quenneville, Celine; Farandeau, Sebastien; Mouchet, Chantal; Pineau, Coralie; Rollinger, Francois; GARIEL, Jean-Christophe; Ando, Ryoko; Nishida, Shoshi; Miazaki, Makoto; Hayano, Ryugo; Lheureux, Yves; Lochard, Jacques; Boilley, David; Godet, Jean-Luc

    2014-10-01

    The first session addressed the context of post-accident management: main challenges of radiation protection in case of nuclear accident, management of energy situations (specific intervention plans of nuclear plants), elements of doctrine for the post-accident management of an accident. The second session addressed the preparedness of territories to post-accident management: preparation to post-accident management in the Montbeliard district, emergency and post-accidental situation (preparedness at the district scale, example of Loiret), and return on experience from the post-accident exercise in Cattenom. The third session addressed the action undertaken by the ANCCLI and IRSN for the awareness of post-accidental problematic (experiments in Saclay, Marcoule, Gravelines and Golfech, lessons learned from the pilot phase and perspectives). The last session addressed the post-accidental management of the Fukushima accident: approach of the IRSN to learn lessons from the dialogue initiative in Fukushima, round table on challenges on the long term of post-accidental management, Japanese witnesses

  18. A study on corium melt pool behavior under external vessel cooling : investigation of the first phase research results in the OECD RASPLAV project

    Energy Technology Data Exchange (ETDEWEB)

    Park, Rae Joon; Kim, Sang Baik; Kim, Hee Dong; Yoo, Kun Joong

    1998-04-01

    The scope and contents of the OECD RASPLAV program are to investigate natural convection heat transfer in the corium, chemical and mechanical interaction between the corium and the reactor vessel, crust formation of the corium, and thermal behaviour of the corium by experiments and model development during external vessel cooling to prevent reactor vessel failure in severe accidents of nuclear power plant. This study includes evaluation and analysis of the RASPLAV V phase I results for three years between July 1, 1994 and June 30, 1997. These results supply technical basis for our experimental program on severe accident research. Two large-scale experiments of RASPLAV-AW-between the corium and the reactor vessel. Several small-scale experiments were conducted to analyze thermal stratification in the corium. The salt experiments were conducted to estimate the crust and the mushy region formation, and natural convection heat transfer in the corium. In the analytical studies, pre and post analysis of the RASPLAV-AW-200 experiments and evaluation of the salt test results have been performed using CONV 2 and 3D computer codes, which were developed during RASPLAV program phase I. Low density corium was separated from the high density corium during the RASPLAV-AW-200 tests and the TULPAN test, which was a new finding in the RASPLAV project phase I. From the salts test, heat flux distribution in the side wall heating case is similar to the direct internal heat generation case, and the crust formation is a little effect on heat transfer rate. The results of CONV 2 and 3 D were very well with with the experimental results. The results of RASLAV project phase I, such as furnace design and the techniques on fuel melting, are very helpful to our severe accident experimental program. (author). 57 refs., 13 tabs., 52 figs.

  19. German risk study on nuclear power stations. Phase B

    International Nuclear Information System (INIS)

    1989-11-01

    The German Risk Study on Nuclear Power Stations is concerned with investigations of accidents in nuclear facilities and their associated risks. These investigations are undertaken on behalf of the federal Minister of Research and Technology. They have been broken down into two phases (Phase A and Phase B). The results of Phase A were published in 1979 (GRS 79). This report contains a summary of the investigations relating to Phase B. After an introduction setting out the basic principles and aim of the study, a general review will be given of the most important results. The course of the investigations and the results have already been published in a Technical Report (GRS 89). (author)

  20. Severe accident training simulator APROS SA

    International Nuclear Information System (INIS)

    Raiko, Eerikki; Salminen, Kai; Lundstroem, Petra; Harti, Mika; Routamo, Tomi

    2003-01-01

    APROS SA is a severe accident training simulator based on the APROS simulation environment. APROS SA has been developed in Fortum Nuclear Services Ltd to serve as a training tool for the personnel of the Loviisa NPP. Training with APROS SA gives the personnel a deeper understanding of the severe accident phenomena and thus it is an important part of the implementation of the severe accident management strategy. APROS SA consists of two parts, a comprehensive Loviisa plant model and an external severe accident model. The external model is an extension to the Loviisa plant model, which allows the simulation to proceed into the severe accident phase. The severe accident model has three submodels: the core melting and relocation model, corium pool model and fission product model. In addition to these, a new thermal-hydraulic solver is introduced to the core region of the Loviisa plant model to replace the more limited APROS thermal-hydraulic solver. The full APROS SA training simulator has a graphical user interface with visualizations of both severe accident management panels at the operator room and the important physical phenomena during the accident. This paper describes the background of the APROS SA training simulator, the severe accident submodels and the graphical user interface. A short description how APROS SA will be used as a training tool at the Loviisa NPP is also given

  1. Determinants of injuries in passenger vessel accidents.

    Science.gov (United States)

    Yip, Tsz Leung; Jin, Di; Talley, Wayne K

    2015-09-01

    This paper investigates determinants of crew and passenger injuries in passenger vessel accidents. Crew and passenger injury equations are estimated for ferry, ocean cruise, and river cruise vessel accidents, utilizing detailed data of individual vessel accidents that were investigated by the U.S. Coast Guard during the time period 2001-2008. The estimation results provide empirical evidence (for the first time in the literature) that crew injuries are determinants of passenger injuries in passenger vessel accidents. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Nuclear accident: dosimetric and medical aspects

    International Nuclear Information System (INIS)

    Oliveira, A.R. de.

    The conservation aspect of the treatment of patients who received whole-body exposure is presented. Such treatment to be started during the first hours after the accident (prodomal phase), as well as the nonconventional measures to be adopted when the critical phase of acute irradiation syndrome is reached. (E.G.) [pt

  3. An examination of aviation accidents in the context of a conflict of interests between law enforcement, insurers, commissions for aircraft accident investigations and other entities

    Directory of Open Access Journals (Sweden)

    Tomasz BALCERZAK

    2017-06-01

    Full Text Available The sole purpose of air accident investigations should be the prevention of accidents and incidents in the future without apportioning blame or liability. Any civil aviation safety system is based on feedback and lessons learned from accidents and incidents, which require the strict application of rules on confidentiality in order to ensure the availability of valuable sources of information in the future. Therefore, related data, especially sensitive safety information, should be protected in an appropriate manner. Information provided by a person in the framework of a safety investigation should not be used against that person, in full respect of constitutional principles, as well as national and international law. Each “involved person” in an accident or another serious incident should promptly notify the competent investigating authority of the state of the event. An “involved person” means the owner, a member of the crew, the operator of the aircraft involved in an accident or other serious incident, or any person involved in the maintenance, design, manufacture of the affected aircraft or in the training of its crews, as well as any person involved in air traffic control, providing flight information or providing airport services to the aircraft in question, the staff of the national civil aviation authority, or staff of the European Aviation Safety Agency. The protection level of the organization (employer: employees who report an event or replace applications following an event with regard to the appropriate reporting systems should not face any prejudice from their employer because of information provided by the applicant. The protection does not cover (exclusions: infringement with wilful misconduct (direct intent, recklessness infringement; infringement committed by a clear and serious disregard of the obvious risks; and serious professional negligence of an unquestionably duty of care required under the circumstances

  4. Small break LOCA [loss of coolant accident] mitigation for Bellefonte

    International Nuclear Information System (INIS)

    Bayless, P.D.; Dobbe, C.A.

    1986-01-01

    Several 5-cm (2-in.) diameter cold leg break loss coolant accidents for the Bellefonte nuclear plant were analyzed as part of the Severe Accident Sequence Analysis Program. The transients assumed various system failures, and included the S 2 D sequence. Operator actions to mitigate the S 2 D transient were also investigated. The transients were analyzed until either core damage began or long-term decay heat removal was established. The S 2 D sequence was analyzed into the core damage phase of the transient. The analyses showed that the flow from one high pressure injection pump was necessary and sufficient to prevent core damage in the absence of operator actions. Operator actions were also able to prevent core damage for the S 2 D sequence

  5. Numerical module for debris behavior under severe accident conditions

    International Nuclear Information System (INIS)

    Kisselev, A.E.; Kobelev, G.V.; Strizhov, V.F.; Vasiliev, A.D.

    2005-01-01

    The late phase of a hypothetical severe accident in a nuclear reactor is characterized by the appearance of porous debris and liquid pools in core region and lower head of the reactor vessel. Thermal hydraulics and heat transfer in these regions are very important for adequate analysis of severe accident dynamics. The purpose of this work is to develop a universal module which is able to model above-mentioned phenomena on the basis of modern physical concepts. The original approach for debris evolution is developed from classical principles using a set of parameters including debris porosity; average particle diameter; temperatures and mass fractions of solid, liquid and gas phases; specific interface areas between different phases; effective thermal conductivity of each phase, including radiative heat conductivity; mass and energy fluxes through the interfaces. The calculation results of several tests on modeling of porous debris behavior, including the MP-1 experiment, are presented in comparison with experimental data. The results are obtained using this module implemented into the Russian best estimate code, RATEG/SVECHA/HEFEST, which was developed for modeling severe accident thermal hydraulics and late phase phenomena in VVER nuclear power plants. (author)

  6. Severe accident considerations in Canadian nuclear power reactors

    International Nuclear Information System (INIS)

    Omar, A.M.; Measures, M.P.; Scott, C.K.; Lewis, M.J.

    1990-08-01

    This paper describes a current study on severe accidents being sponsored by the Atomic Energy Control Board (AECB) and provides background on other related Canadian work. Scoping calculations are performed in Phase I of the AECB study to establish the relative consequences of several permutations resulting from six postulated initiating events, nine containment states, and a selection of meteorological conditions and health effects mitigating criteria. In Phase II of the study, selected accidents sequences would be analyzed in detail using models suitable for the design features of the Canadian nuclear power reactors

  7. Accident investigation board report on the May 14, 1997, chemical explosion at the Plutonium Reclamation Facility, Hanford Site,Richland, Washington - summary report

    International Nuclear Information System (INIS)

    Gerton, R.E.

    1997-01-01

    This report is a summary of the Accident Investigation Board Report on the May 14, 1997, Chemical Explosion at the Plutonium Reclamation Facility, Hanford Site, Richland, Washington (DOE/RL-97-59). The referenced report provides a greater level of detail and includes a complete discussion of the facts identified, analysis of those facts, conclusions derived from the analysis, identification of the accident's causal factors, and recommendations that should be addressed through follow-up action by the U.S. Department of Energy and its contractors. This companion document provides a concise summary of that report, with emphasis on management issues. Evaluation of emergency and occupational health response to, and radiological and chemical releases from, this accident was not within the scope of this investigation, but is the subject of a separate investigation and report (see DOE/RL-97-62)

  8. Gas phase chemistry and removal of CH{sub 3}I during a severe accident

    Energy Technology Data Exchange (ETDEWEB)

    Karhu, A. [VTT. Energy, Esbo (Finland)

    2001-01-01

    The purpose of this literature review was to gather valuable information on the behavior of methyl iodide on the gas phase during a severe accident. The potential of transition metals, especially silver and copper, to remove organic iodides from the gas streams was also studied. Transition metals are one of the most interesting groups in the context of iodine mitigation. For example silver is known to react intensively with iodine compounds. Silver is also relatively inert material and it is thermally stable. Copper is known to react with some radioiodine species. However, it is not reactive toward methyl iodide. In addition, it is oxidized to copper oxide under atmospheric conditions. This may limit the industrial use of copper.(au)

  9. Application of NUREG-1150 methods and results to accident management

    International Nuclear Information System (INIS)

    Dingman, S.E.; Sype, T.T.; Camp, A.L.

    1990-01-01

    The risk from five nuclear power plants was examined during the NUREG-1150 program. When the analyses of the plants were complete, an effort was undertaken to examine the implications of NUREG-1150 for accident management initiatives. The framework provided by the NUREG-1150 analysis presented a means within which current accident management strategies could be evaluated and future accident management strategies could be developed and assessed. Five separate but interrelated phases of risk management were considered: (1) prevention of accident initiators, (2) prevention of core damage, (3) implementation of an effective emergency response, (4) prevention of vessel breach and mitigation of radionuclide releases from the reactor coolant system, and (5) retention of fission products in the containment and other surrounding buildings. A risk-based methodology was developed to identify and evaluate risk management options for each of these five phases. The methodology was demonstrated through quantitative examples for the first two phases of risk management listed above. In addition, the reduction in risk for several currently implemented risk management strategies at operating plants was quantified

  10. Investigation of a two-phase nozzle flow and validation of several computer codes by the experimental data

    International Nuclear Information System (INIS)

    Kedziur, F.

    1980-03-01

    Stationary experiments with a convergent nozzle are performed in order to validate advanced two-phase computer codes, which find application in the blowdown-phase of a loss-of-coolant accident (LOCA). The steam/water flow presents a broad variety of initial conditions: The pressure varies between 2 and 13 MPa, the void fraction between 0 (subcooled) and about 80%, a great number of subcritical as well as critical experiments with different flow pattern is investigated. Additional air/water experiments serve for the separation of phase transition effects. The transient acceleration of the fluid in the LOCA-case is simulated by a local acceleration in the experiments. The layout of the nozzle and the applied measurement technique allow for a separate testing of physical models and the determination of empirical model parameters, respectively: In the four codes DUESE, DRIX-20, RELAP4/MOD6 and STRUYA the models - if they exist - for slip between the phases, thermodynamic non-equilibrium, pipe friction and critical mass flow rate are validated and criticised in comparison with the experimental data, and the corresponding model parameters are determined. The parameters essentially are a function of the void fraction. (orig.) [de

  11. Scoping Analysis on Core Disruptive Accident in PGSFR (2015 Results)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Won; Chang, Won-Pyo; Ha, Kwi-Seok; Ahn, Sang June; Kang, Seok Hun; Choi, Chi-Woong; Lee, Kwi Lim; Jeong, Jae-Ho; Kim, Jin Su; Jeong, Taekyeong [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    In general, the severe accident is classified by three phases. The first phase is the initiation (pre-disassembly) phase that occurs the gradual core meltdown from accident initiation to the point of neutronic shutdown with an intact geometry. The second phase is the transition phase that happens the fuel transition from a solid to a liquid phase. Fuel and cladding can melt to form a molten pool and core can boil, then criticality conditions can recur. The third phase is the disassembly phase. In other words, this phase is Core Disruptive Accident (CDA). Power excursion is followed until the core is disassembled in this phase. In the early considerations of Liquid Metal Fast Breeder Reactor (LMFBR) energetics, the term Hypothetical Core Disruptive Accidents (HCDAs) was in common use. This was not only to connote the extremely low probability of initiation of such accidents, but also the tentative nature of our understanding of their behavior and resulting consequences. A numerical analysis is conducted to estimate the energy release, pressure behavior and core expansion behavior induced by CDA of PGSFR using CDA-ER and CDA-CEME codes. Conservatively, the calculated results of energy release and pressure behavior induced by CDA without Doppler effect in PGSFR when whole cores were melted (100 $/s) were 7.844 GJ and 4.845 GPa, respectively. With Doppler effect, the analyzed maximum energy release and pressure were 6.696 GJ and 3.449 GPa, respectively. The calculated results of the core expansion behavior during 0.015 seconds after the explosion without Doppler effect in PGSFR when whole cores were melted (100 $/s) were as follows: The total energy is calculated to be 1.87 GJ. At 0.01 s, the kinetic energy of the sodium is 1.85 GJ, while the expansion work and internal energy of the bubble are 19.7 MJ and 0.98 J, respectively. With Doppler effect, the total energy is calculated to be 1.33 GJ. At 0.01 s, the kinetic energy of the sodium is 1.31 GJ, while the expansion

  12. Accidents - Chernobyl accident

    International Nuclear Information System (INIS)

    2004-01-01

    This file is devoted to the Chernobyl accident. It is divided in four parts. The first part concerns the accident itself and its technical management. The second part is relative to the radiation doses and the different contaminations. The third part reports the sanitary effects, the determinists ones and the stochastic ones. The fourth and last part relates the consequences for the other European countries with the case of France. Through the different parts a point is tackled with the measures taken after the accident by the other countries to manage an accident, the cooperation between the different countries and the groups of research and studies about the reactors safety, and also with the international medical cooperation, specially for the children, everything in relation with the Chernobyl accident. (N.C.)

  13. A study on the development of framework and supporting tools for severe accident management

    International Nuclear Information System (INIS)

    Chang, Hyun Sop

    1996-02-01

    Through the extensive research on severe accidents, knowledge on severe accident phenomenology has constantly increased. Based upon such advance, probabilistic risk studies have been performed for some domestic plants to identify plant-specific vulnerabilities to severe accidents. Severe accident management is a program devised to cover such vulnerabilities, and leads to possible resolution of severe accident issues. This study aims at establishing severe accident management framework for domestic nuclear power plants where severe accident management program is not yet established. Emphasis is given to in-vessel and ex-vessel accident management strategies and instrumentation availability for severe accident management. Among the various strategies investigated, primary system depressurization is found to be the most effective means to prevent high pressure core melt scenarios. During low pressure core melt sequences, cooling of in-vessel molten corium through reactor cavity flooding is found to be effective. To prevent containment failure, containment filtered venting is found to be an effective measure to cope with long-term and gradual overpressurization, together with appropriate hydrogen control measure. Investigation of the availability of Yonggwang 3 and 4 instruments shows that most of instruments essential to severe accident management lose their desired functions during the early phase of severe accident progression, primarily due to the environmental condition exceeded ranges of instruments. To prevent instrument failure, a wider range of instruments are recommended to be used for some severe accident management strategies such as reactor cavity flooding. Severe accidents are generally known to accompany a number of complex phenomena and, therefore, it is very beneficial when severe accident management personnel is aided by appropriately designed supporting systems. In this study, a support system for severe accident management personnel is developed

  14. Regulation Plans on Severe Accidents developed by KINS Severe Accident Regulation Preparation TFT

    International Nuclear Information System (INIS)

    Kim, Kyun Tae; Chung, Ku Young; Na, Han Bee

    2016-01-01

    Some nuclear power plants in Fukushima Daiichi site had lost their emergency reactor cooling function for long-time so the fuels inside the reactors were molten, and the integrity of containment was damaged. Therefore, large amount of radioactive material was released to environment. Because the social and economic effects of severe accidents are enormous, Korean Government already issued 'Severe Accident Policy' in 2001 which requires nuclear power plant operators to set up 'Quantitative Safety Goal', to do 'Probabilistic Safety Analysis', to install 'Severe Accident Countermeasures' and to make 'Severe Accident Management Plan'. After the Fukushima disaster, a Special Safety Inspection was performed for all operating nuclear power plants of Korea. The inspection team from industry, academia, and research institutes assessed Korean NPPs capabilities to cope with or respond to severe accidents and emergency situation caused by natural disasters such as a large earthquake or tsunami. As a result of the special inspection, about 50 action items were identified to increase the capability to cope with natural disaster and severe accidents. Nuclear Safety Act has been amended to require NPP operators to submit Accident Management Plant as part of operating license application. The KINS Severe Accident Regulation Preparation TFT had first investigated oversea severe accident regulation trend before and after the Fukushima accident. Then, the TFT has developed regulation draft for severe accidents such as Severe accident Management Plans, the required design features for new NPPs to prevent severe accident against multiple failures and beyond-design external events, countermeasures to mitigate severe accident and to keep the integrity of containment, and assessment methodology on safety assessment plan and probabilistic safety assessment

  15. LMFBR accident delineation study: approach and preliminary results

    International Nuclear Information System (INIS)

    Williams, D.C.; Sholtis, J.A.; Rios, M.; Worledge, D.H.; Conrad, P.W.; Varela, D.W.; Pickard, P.S.

    1979-01-01

    Event trees have been constructed for all phases of LMFBR accidents. The trees proved useful for identifying meaningful initiating accident categories and containment responses. In these areas, quantification appears feasible, given an adequate data base. Event trees were also used to represent in-core phenomenological questions governing accident progression and energetics, but here quantification appears impracticable because pervasive phenomenological uncertainties exist. Infrequent accident initiation is the dominant factor in assuring low risk. Nevertheless, containment promises an additional measure of risk reduction provided severe energetics are highly unlikely. The delineation served to systematize LMFBR safety issues and should aid in evaluating LMFBR R and D priorities

  16. Accident Tolerant Reactor Shutdown for NTP Systems, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — In brief, USNC's accident submersion safe drums are control drums where a small amount of fuel is added opposite to the neutron absorber and the drums impinge on the...

  17. Effect of parameter variation of reactor coolant pump on loss of coolant accident consequence

    International Nuclear Information System (INIS)

    Dang Gaojian; Huang Daishun; Gao Yingxian; He Xiaoqiang

    2015-01-01

    In this paper, the analyses were carried out on Ling'ao nuclear power station phase II to study the consequence of the loss of coolant accident when the homologous characteristic curves and free volumes of the reactor coolant pump changed. Two different pumps used in the analysis were 100D (employed on Ling'ao nuclear power station phase II) and ANDRITZ. The thermal characteristics in the large break LOCA accident were analyzed using CATHRE GB and CONPATE4, and the reactor coolant system hydraulics load during blow-clown phase of LOCA accident was analyzed using ATHIS and FORCET. The calculated results show that the homologous characteristic curves have great effect on the thermal characteristics of reactor core during the reflood phase of the large break LOCA accident. The maximum cladding surface temperatures are quite different when the pump's homologous characteristic curves change. On the other hand, the pump's free volume changing results in the variation of the LOCA rarefaction wave propagation, and therefore, the reactor coolant system hydraulic load in LOCA accident would be different. (authors)

  18. Estimating the Influence of Accident Related Factors on Motorcycle Fatal Accidents using Logistic Regression (Case Study: Denpasar-Bali

    Directory of Open Access Journals (Sweden)

    Wedagama D.M.P.

    2010-01-01

    Full Text Available In Denpasar the capital of Bali Province, motorcycle accident contributes to about 80% of total road accidents. Out of those motorcycle accidents, 32% are fatal accidents. This study investigates the influence of accident related factors on motorcycle fatal accidents in the city of Denpasar during period 2006-2008 using a logistic regression model. The study found that the fatality of collision with pedestrians and right angle accidents were respectively about 0.44 and 0.40 times lower than collision with other vehicles and accidents due to other factors. In contrast, the odds that a motorcycle accident will be fatal due to collision with heavy and light vehicles were 1.67 times more likely than with other motorcycles. Collision with pedestrians, right angle accidents, and heavy and light vehicles were respectively accounted for 31%, 29%, and 63% of motorcycle fatal accidents.

  19. Prevention and investigations of core degradation in case of beyond design accidents of the 2400 MWTH gas-cooled fast reactor

    International Nuclear Information System (INIS)

    Bertrand, F.; Gatin, V.; Bentivoglio, F.; Gueneau, C.

    2011-01-01

    The present paper deals with studies carried out to assess the ability of the core of the Gas Fast Reactor (GFR) to withstand beyond design accidents. The work presented here is aimed at simulating the behaviour of this core by using analytical models whose input parameters are calculated with the CATHARE2 code. Among possible severe accident initiators, the Unprotected Loss Of Coolant Accident (ULOCA of 3 Inches diameter) is investigated in detail in the paper with CATHARE2. Additionally, a simplified pessimistic assessment of the effect of a postulated power excursion that could result from the failure of prevention provisions is presented. (author)

  20. Occupational accidents aboard merchant ships

    DEFF Research Database (Denmark)

    Hansen, H.L.; Nielsen, D.; Frydenberg, Morten

    2002-01-01

    Objectives: To investigate the frequency, circumstances, and causes of occupational accidents aboard merchant ships in international trade, and to identify risk factors for the occurrence of occupational accidents as well as dangerous working situations where possible preventive measures may...... be initiated. Methods: The study is a historical follow up on occupational accidents among crew aboard Danish merchant ships in the period 1993–7. Data were extracted from the Danish Maritime Authority and insurance data. Exact data on time at risk were available. Results: A total of 1993 accidents were...... aboard. Relative risks for notified accidents and accidents causing permanent disability of 5% or more were calculated in a multivariate analysis including ship type, occupation, age, time on board, change of ship since last employment period, and nationality. Foreigners had a considerably lower recorded...

  1. Modelling Accident Tolerant Fuel Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Hales, Jason Dean [Idaho National Laboratory; Gamble, Kyle Allan Lawrence [Idaho National Laboratory

    2016-05-01

    The catastrophic events that occurred at the Fukushima-Daiichi nuclear power plant in 2011 have led to widespread interest in research of alternative fuels and claddings that are proposed to be accident tolerant. The United States Department of Energy (DOE) through its Nuclear Energy Advanced Modeling and Simulation (NEAMS) program has funded an Accident Tolerant Fuel (ATF) High Impact Problem (HIP). The ATF HIP is a three-year project to perform research on two accident tolerant concepts. The final outcome of the ATF HIP will be an in-depth report to the DOE Advanced Fuels Campaign (AFC) giving a recommendation on whether either of the two concepts should be included in their lead test assembly scheduled for placement into a commercial reactor in 2022. The two ATF concepts under investigation in the HIP are uranium silicide fuel and iron-chromium-aluminum (FeCrAl) alloy cladding. Utilizing the expertise of three national laboratory participants (Idaho National Laboratory, Los Alamos National Laboratory, and Argonne National Laboratory), a comprehensive multiscale approach to modeling is being used that includes atomistic modeling, molecular dynamics, rate theory, phase-field, and fuel performance simulations. Model development and fuel performance analysis are critical since a full suite of experimental studies will not be complete before AFC must prioritize concepts for focused development. In this paper, we present simulations of the two proposed accident tolerance fuel systems: U3Si2 fuel with Zircaloy-4 cladding, and UO2 fuel with FeCrAl cladding. Sensitivity analyses are completed using Sandia National Laboratories’ Dakota software to determine which input parameters (e.g., fuel specific heat) have the greatest influence on the output metrics of interest (e.g., fuel centerline temperature). We also outline the multiscale modelling approach being employed. Considerable additional work is required prior to preparing the recommendation report for the Advanced

  2. Regulation Plans on Severe Accidents developed by KINS Severe Accident Regulation Preparation TFT

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyun Tae; Chung, Ku Young; Na, Han Bee [KINS, Daejeon (Korea, Republic of)

    2016-05-15

    Some nuclear power plants in Fukushima Daiichi site had lost their emergency reactor cooling function for long-time so the fuels inside the reactors were molten, and the integrity of containment was damaged. Therefore, large amount of radioactive material was released to environment. Because the social and economic effects of severe accidents are enormous, Korean Government already issued 'Severe Accident Policy' in 2001 which requires nuclear power plant operators to set up 'Quantitative Safety Goal', to do 'Probabilistic Safety Analysis', to install 'Severe Accident Countermeasures' and to make 'Severe Accident Management Plan'. After the Fukushima disaster, a Special Safety Inspection was performed for all operating nuclear power plants of Korea. The inspection team from industry, academia, and research institutes assessed Korean NPPs capabilities to cope with or respond to severe accidents and emergency situation caused by natural disasters such as a large earthquake or tsunami. As a result of the special inspection, about 50 action items were identified to increase the capability to cope with natural disaster and severe accidents. Nuclear Safety Act has been amended to require NPP operators to submit Accident Management Plant as part of operating license application. The KINS Severe Accident Regulation Preparation TFT had first investigated oversea severe accident regulation trend before and after the Fukushima accident. Then, the TFT has developed regulation draft for severe accidents such as Severe accident Management Plans, the required design features for new NPPs to prevent severe accident against multiple failures and beyond-design external events, countermeasures to mitigate severe accident and to keep the integrity of containment, and assessment methodology on safety assessment plan and probabilistic safety assessment.

  3. Barriers to learning from incidents and accidents

    NARCIS (Netherlands)

    Dechy, N.; Dien, Y.; Drupsteen, L.; Felicio, A.; Cunha, C.; Roed-Larsen, S.; Marsden, E.; Tulonen, T.; Stoop, J.; Strucic, M.; Vetere Arellano, A.L.; Vorm, J.K.J. van der; Benner, L.

    2015-01-01

    This document provides an overview of knowledge concerning barriers to learning from incidents and accidents. It focuses on learning from accident investigations, public inquiries and operational experience feedback, in industrial sectors that are exposed to major accident hazards. The document

  4. What are the factors that contribute to road accidents? An assessment of law enforcement views, ordinary drivers' opinions, and road accident records.

    Science.gov (United States)

    Rolison, Jonathan J; Regev, Shirley; Moutari, Salissou; Feeney, Aidan

    2018-06-01

    What are the main contributing factors to road accidents? Factors such as inexperience, lack of skill, and risk-taking behaviors have been associated with the collisions of young drivers. In contrast, visual, cognitive, and mobility impairment have been associated with the collisions of older drivers. We investigated the main causes of road accidents by drawing on multiple sources: expert views of police officers, lay views of the driving public, and official road accident records. In Studies 1 and 2, police officers and the public were asked about the typical causes of road traffic collisions using hypothetical accident scenarios. In Study 3, we investigated whether the views of police officers and the public about accident causation influence their recall accuracy for factors reported to contribute to hypothetical road accidents. The results show that both expert views of police officers and lay views of the driving public closely approximated the typical factors associated with the collisions of young and older drivers, as determined from official accident records. The results also reveal potential underreporting of factors in existing accident records, identifying possible inadequacies in law enforcement practices for investigating driver distraction, drug and alcohol impairment, and uncorrected or defective eyesight. Our investigation also highlights a need for accident report forms to be continuously reviewed and updated to ensure that contributing factor lists reflect the full range of factors that contribute to road accidents. Finally, the views held by police officers and the public on accident causation influenced their memory recall of factors involved in hypothetical scenarios. These findings indicate that delay in completing accident report forms should be minimised, possibly by use of mobile reporting devices at the accident scene. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  5. A contribution to a theory of two-phase flow with phase change and addition of heat in a coolant channel of a LWR-fuel element during a loss-of-coolant accident

    International Nuclear Information System (INIS)

    Gaballah, I.

    1978-09-01

    A contribution to a theory of two-phase flow with phase change and addition of heat in a coolant channel of a LWR-fuel element during a loss-of-coolant accident. A theory was developed for the calculation of a dispersed two phase flow with heat addition in a channel with general area change. The theory was used to study different thermodynamic and gasdynamic processes, which may occur during the emergency cooling after a LOCA of a pressurized water reactor. The basic equations were formulated and solved numerically. The heat transfer mechanism was examined. Calculations have indicated that the radiative heat flux component is small compared to the convective component. A drop size spectrum was used in the calculations. Its effect on the heat transfer was investigated. It was found that the calculation with a mean drop diameter gives good results. Significant thermal non-equilibrium has been evaluated. The effect of different operating parameters on the degree of thermal non-equilibrium was studied. The flow and heat transfer in a channel with cross-sectional area change were calculated. It was shown that the channel deformation affects the state properties and the heat transfer along the channel very strongly. (orig.) 891 GL [de

  6. The covariance between the number of accidents and the number of victims in multivariate analysis of accident related outcomes

    NARCIS (Netherlands)

    Bijleveld, F. D.

    In this study some statistical issues involved in the simultaneous analysis of accident related outcomes of the road traffic process are investigated. Since accident related outcomes like the number of victims, fatalities or accidents show interdependencies, their simultaneous analysis requires that

  7. Revised accident source terms for light-water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Soffer, L. [Nuclear Regulatory Commission, Washington, DC (United States)

    1995-02-01

    This paper presents revised accident source terms for light-water reactors incorporating the severe accident research insights gained in this area over the last 15 years. Current LWR reactor accident source terms used for licensing date from 1962 and are contained in Regulatory Guides 1.3 and 1.4. These specify that 100% of the core inventory of noble gases and 25% of the iodine fission products are assumed to be instantaneously available for release from the containment. The chemical form of the iodine fission products is also assumed to be predominantly elemental iodine. These assumptions have strongly affected present nuclear air cleaning requirements by emphasizing rapid actuation of spray systems and filtration systems optimized to retain elemental iodine. A proposed revision of reactor accident source terms and some im implications for nuclear air cleaning requirements was presented at the 22nd DOE/NRC Nuclear Air Cleaning Conference. A draft report was issued by the NRC for comment in July 1992. Extensive comments were received, with the most significant comments involving (a) release fractions for both volatile and non-volatile species in the early in-vessel release phase, (b) gap release fractions of the noble gases, iodine and cesium, and (c) the timing and duration for the release phases. The final source term report is expected to be issued in late 1994. Although the revised source terms are intended primarily for future plants, current nuclear power plants may request use of revised accident source term insights as well in licensing. This paper emphasizes additional information obtained since the 22nd Conference, including studies on fission product removal mechanisms, results obtained from improved severe accident code calculations and resolution of major comments, and their impact upon the revised accident source terms. Revised accident source terms for both BWRS and PWRS are presented.

  8. The investigation on the mass media reports on the JCO accident in the major atomic energy countries and Asian countries

    International Nuclear Information System (INIS)

    1999-12-01

    The JCO (Japan Conversion Organization) accident is the worst one in the history of the atomic energy developments in Japan. The many reports about the accident appeared in the 44 mass media in the world from Sep. 30 to Oct. 14, 1999. Chronological statistics of issued 522 articles are listed under particular criteria. Some of them were based on wrong knowledge and/or overestimations about the accident based on delivered articles by the news agency. Some of others gave critics over the total atomic energy industries of Japan, especially on safety managements and so-called similar Japan syndromes. This investigation gives emphasis on the articles based on wrong knowledge. We identified the countries and the newspaper publishers and the news agencies those gave wrong descriptions. Total 25 articles used the words [explosion] and [fire], which were delivered from the Kyodo News Service. Some of the Asian newspaper wrote that a large quantity of radioactivity, radioactive material and/or nuclear fuels was released. Some other news publishers said the accident was happened at fuel reprocessing facilities, when the waste fuel rods were under cutting. Critics delivered in the individual countries were summarized, i.e. USA, Canada, France, UK, German, Russia, Australia, China, Korea, Thailand, Vietnam, Indonesia, Taiwan and the news agencies. One of the key issues is the exact information release for the press corps on the early stage of the accidents. The second point is to recognize the different status on atomic energy in the individual countries, when Japan want to explain their domestic situations. Accidents of atomic energy gave many impacts on various aspects to other countries. Japan should understand the neighborhood by collecting world information on atomic energy and analyzing them. Summaries of 522 articles appeared in the mass media were attached in this investigation among the report of 180 pages. (Tanaka, Y.)

  9. Type A behavior pattern, accident optimism and fatalism: an investigation into non-compliance with safety work behaviors among hospital nurses.

    Science.gov (United States)

    Ugwu, Fabian O; Onyishi, Ike E; Ugwu, Chidi; Onyishi, Charity N

    2015-01-01

    Safety work behavior has continued to attract the interest of organizational researchers and practitioners especially in the health sector. The goal of the study was to investigate whether personality type A, accident optimism and fatalism could predict non-compliance with safety work behaviors among hospital nurses. One hundred and fifty-nine nursing staff sampled from three government-owned hospitals in a state in southeast Nigeria, participated in the study. Data were collected through Type A Behavior Scale (TABS), Accident Optimism, Fatalism and Compliance with Safety Behavior (CSB) Scales. Our results showed that personality type A, accident optimism and fatalism were all related to non-compliance with safety work behaviors. Personality type A individuals tend to comply less with safety work behaviors than personality type B individuals. In addition, optimistic and fatalistic views about accidents and existing safety rules also have implications for compliance with safety work behaviors.

  10. Evaluation of early phase nuclear accident clean-up procedures for Nordic residential areas

    International Nuclear Information System (INIS)

    Andersson, K.G.

    1996-12-01

    The work reported was carried out as a part of the EKO-5 project under the framework of the Nordic co-operative NKS programme. The project is aimed at giving guidelines relating to Nordic conditions for the reduction of external doses in the early phase of a major accidental airborne nuclear contamination (essentially with 137 Cs) situation in urban areas. The material in this report describes the expected effects, in terms of immediate dose rate reduction and of reduction of the integrated doses over 70 years, of implementation of the methods which were considered to be feasible for early phase treatment of contaminated urban surfaces. Also given are estimates of the integrated doses if no action were taken. The given estimates were based on the experience obtained through large amounts of in situ measurements on different types of surface, mainly since the Chernobyl accident in 1986. The computer model URGENT, was used to apply the information on the migration of the radioactive material with time, together with the results of Monte Carlo photon transport calculations, for the time-integrated dose estimates. 66 data sheets describe the beneficial effects, costs and disadvantages of application of a feasible method for cleaning in the early phase of a specific type of surface in one of five different urban or suburban environments. These data form the foundation for the recommendations on guidelines, which are the ultimate goal of the EKO-5 project. References are given to recommended supplementary reading. (EG)

  11. Accident investigation of construction sites in Qom city using Pareto chart (2009-2012

    Directory of Open Access Journals (Sweden)

    M. H. Beheshti

    2015-07-01

    .Conclusions: Employing Pareto charts as a method for analyzing and identification of accident causes can have an effective role in the management of work-related accidents, proper allocation of funds and time.

  12. Dementia and Traffic Accidents: A Danish Register-Based Cohort Study.

    Science.gov (United States)

    Petersen, Jindong Ding; Siersma, Volkert; Nielsen, Connie Thurøe; Vass, Mikkel; Waldorff, Frans Boch

    2016-09-27

    As a consequence of a rapid growth of an ageing population, more people with dementia are expected on the roads. Little is known about whether these people are at increased risk of road traffic-related accidents. Our study aims to investigate the risk of road traffic-related accidents for people aged 65 years or older with a diagnosis of dementia in Denmark. We will conduct a nationwide population-based cohort study consisting of Danish people aged 65 or older living in Denmark as of January 1, 2008. The cohort is followed for 7 years (2008-2014). Individual's personal data are available in Danish registers and can be linked using a unique personal identification number. A person is identified with dementia if the person meets at least one of the following criteria: (1) a diagnosis of the disease in the Danish National Patient Register or in the Danish Psychiatric Central Research Register, and/or (2) at least one dementia diagnosis-related drug prescription registration in the Danish National Prescription Registry. Police-, hospital-, and emergency room-reported road traffic-related accidents occurred within the study follow-up are defined as the study outcome. Cox proportional hazard regression models are used for the main analysis. Our study protocol has 3 phases including data collection, data analysis, and reporting. The first phase of register-based data collection of 853,228 individual's personal information was completed in August, 2016. The next phase is data analysis, which is expected to be finished before December 2016, and thereafter writing publications based on the findings. The study started in January 2016 and will end in December 2018. This study covers the entire elderly population of Denmark, and thereby will avoid selection bias due to nonparticipation and loss to follow-up. Furthermore, this ensures that the study results are reliable and generalizable. However, underreporting of traffic-related accidents may occur, which will limit estimation

  13. Aviation safety and maintenance under major organizational changes, investigating non-existing accidents.

    Science.gov (United States)

    Herrera, Ivonne A; Nordskag, Arve O; Myhre, Grete; Halvorsen, Kåre

    2009-11-01

    The objective of this paper is to discuss the following questions: Do concurrent organizational changes have a direct impact on aviation maintenance and safety, if so, how can this be measured? These questions were part of the investigation carried out by the Accident Investigation Board, Norway (AIBN). The AIBN investigated whether Norwegian aviation safety had been affected due to major organizational changes between 2000 and 2004. The main concern was the reduction in safety margins and its consequences. This paper presents a summary of the techniques used and explains how they were applied in three airlines and by two offshore helicopter operators. The paper also discusses the development of safety related indicators in the aviation industry. In addition, there is a summary of the lessons learned and safety recommendations. The Norwegian Ministry of Transport has required all players in the aviation industry to follow up the findings and recommendations of the AIBN study.

  14. Investigation on Melt-Structure-Water Interactions (MSWI) during severe accidents

    Energy Technology Data Exchange (ETDEWEB)

    Sehgal, B.R.; Yang, Z.L.; Dinh, T.N.; Nourgaliev, R.R.; Bui, V.A.; Haraldsson, H.O.; Li, H.X.; Konovakhin, M.; Paladino, D.; Leung, W.H [Royal Inst. of Tech., Stockholm (Sweden). Div. of Nuclear Power Safety

    1999-08-01

    to fragment. The molten fuel-coolant mixtures with a binary oxidic core melt (UO{sub 2}-ZrO{sub 2}) may feature low triggerability and low explosivity. The mechanical-to-thermal conversion ratio may be very low. The presence of metallic component in the melt may significantly enhance triggerability and explosivity of molten corium. The characteristics of melt spreading into 2-D channel are much different from those into 1-D channel. The evaluations of spreading parameters in reactor accident situations would be strongly affected by the uncertainties in the boundary conditions of the melt spreading process, such as downward heat removal and of upward heat removal in case of core melt spreading under water. Computer codes were developed and validated against the data obtained in the MSWI Project. The Multiphase Eulerian Lagrangian Transport code (MELT-313) was validated to investigate the hydrodynamics during the premixing process of jet penetrating into a water pool. The FlowLab code employing the multi-fluid multi-phase Lattice-Boltzmann method was developed and validated. In the Lattice-Boltzmann approach, no special treatment is needed to track the interface. A scaling technology was developed to describe the spreading efficiency of melt into I -D channel. The melt vessel interaction thermal analysis (MVITA) code describes the process of melt pool formation, melt pool convection and the resulting vessel thermal loadings. A gap cooling model and model representing penetrations were incorporated into this code. The code was coupled with ANSYS code, which performs structure analysis. Thus a coupled thermal and mechanical analysis of the loadings of a pressure vessel during the melt-vessel interaction, could be performed.

  15. Investigation on Melt-Structure-Water Interactions (MSWI) during severe accidents

    International Nuclear Information System (INIS)

    Sehgal, B.R.; Yang, Z.L.; Dinh, T.N.; Nourgaliev, R.R.; Bui, V.A.; Haraldsson, H.O.; Li, H.X.; Konovakhin, M.; Paladino, D.; Leung, W.H

    1999-08-01

    to fragment. The molten fuel-coolant mixtures with a binary oxidic core melt (UO 2 -ZrO 2 ) may feature low triggerability and low explosivity. The mechanical-to-thermal conversion ratio may be very low. The presence of metallic component in the melt may significantly enhance triggerability and explosivity of molten corium. The characteristics of melt spreading into 2-D channel are much different from those into 1-D channel. The evaluations of spreading parameters in reactor accident situations would be strongly affected by the uncertainties in the boundary conditions of the melt spreading process, such as downward heat removal and of upward heat removal in case of core melt spreading under water. Computer codes were developed and validated against the data obtained in the MSWI Project. The Multiphase Eulerian Lagrangian Transport code (MELT-313) was validated to investigate the hydrodynamics during the premixing process of jet penetrating into a water pool. The FlowLab code employing the multi-fluid multi-phase Lattice-Boltzmann method was developed and validated. In the Lattice-Boltzmann approach, no special treatment is needed to track the interface. A scaling technology was developed to describe the spreading efficiency of melt into I -D channel. The melt vessel interaction thermal analysis (MVITA) code describes the process of melt pool formation, melt pool convection and the resulting vessel thermal loadings. A gap cooling model and model representing penetrations were incorporated into this code. The code was coupled with ANSYS code, which performs structure analysis. Thus a coupled thermal and mechanical analysis of the loadings of a pressure vessel during the melt-vessel interaction, could be performed

  16. Results of the reliability investigations for the design basis accident 'Rupture of a cold primary coolant system'

    International Nuclear Information System (INIS)

    Hoertner, H.; Nieckau, E.; Spindler, H.

    1976-12-01

    This report gives a comprehensive presentation of the detailed reliability investigation carried out for the engineered safety features installed to cope with the design basis accident 'Large LOCA' of a German nuclear power plant with pressurized water reactor. The investigation is based on the engineered safety features of the Biblis Nuclear Power Plant, Unit A. The reliability investigation is carried out by means of a fault tree analysis. The influence of common-mode failures is assessed. (orig.) [de

  17. Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1: Evaluation of severe accident risk during mid-loop operations. Main report. Volume 6. Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Jo, J.; Lin, C.C.; Neymotin, L. [Brookhaven National Lab., Upton, NY (United States)] [and others

    1995-05-01

    During 1989, the Nuclear Regulatory Commission (NRC) initiated an extensive program to carefully examine the potential risks during low power and shutdown operations. The program includes two parallel projects being performed by Brookhaven National Laboratory (BNL) and Sandia National Laboratories (SNL). Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the plants to be studied. The objectives of the program are to assess the risks of severe accidents initiated during plant operational states other than full power operation and to compare the estimated core damage frequencies, important accident sequences and other qualitative and quantitative results with those accidents initiated during full power operation as assessed in NUREG-1150. The scope of the program includes that of a level-3 PRA. A phased approach was used in the level-1 program. In phase 1 which was completed in Fall 1991, a coarse screening analysis including internal fire and flood was performed for all plant operational states (POSs). The objective of the phase 1 study was to identify potential vulnerable plant configurations, to characterize (on a high, medium, or low basis) the potential core damage accident scenarios, and to provide a foundation for a detailed phase 2 analysis. In phase 2, mid-loop operation was selected as the plant configuration to be analyzed based on the results of the phase 1 study. The objective of the phase 2 study is to perform a detailed analysis of the potential accident scenarios that may occur during mid-loop operation, and compare the results with those of NUREG-1150. The results of the phase 2 level 2/3 study are the subject of this volume of NUREG/CR-6144, Volume 6.

  18. Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1: Evaluation of severe accident risk during mid-loop operations. Main report. Volume 6. Part 1

    International Nuclear Information System (INIS)

    Jo, J.; Lin, C.C.; Neymotin, L.

    1995-05-01

    During 1989, the Nuclear Regulatory Commission (NRC) initiated an extensive program to carefully examine the potential risks during low power and shutdown operations. The program includes two parallel projects being performed by Brookhaven National Laboratory (BNL) and Sandia National Laboratories (SNL). Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the plants to be studied. The objectives of the program are to assess the risks of severe accidents initiated during plant operational states other than full power operation and to compare the estimated core damage frequencies, important accident sequences and other qualitative and quantitative results with those accidents initiated during full power operation as assessed in NUREG-1150. The scope of the program includes that of a level-3 PRA. A phased approach was used in the level-1 program. In phase 1 which was completed in Fall 1991, a coarse screening analysis including internal fire and flood was performed for all plant operational states (POSs). The objective of the phase 1 study was to identify potential vulnerable plant configurations, to characterize (on a high, medium, or low basis) the potential core damage accident scenarios, and to provide a foundation for a detailed phase 2 analysis. In phase 2, mid-loop operation was selected as the plant configuration to be analyzed based on the results of the phase 1 study. The objective of the phase 2 study is to perform a detailed analysis of the potential accident scenarios that may occur during mid-loop operation, and compare the results with those of NUREG-1150. The results of the phase 2 level 2/3 study are the subject of this volume of NUREG/CR-6144, Volume 6

  19. Melt Fragmentation Characteristics of Metal Fuel with Melt Injection Mass during Initiating Phase of SFR Severe Accidents

    Energy Technology Data Exchange (ETDEWEB)

    Heo, Hyo; Lee, Min Ho; Bang, In Cheol [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of); Jerng, Dong Wook [Chung-Ang Univ., Seoul (Korea, Republic of)

    2016-05-15

    The PGSFR has adopted the metal fuel for its inherent safety under severe accident conditions. However, this fuel type is not demonstrated clearly yet under the such severe accident conditions. Additional experiments for examining these issues should be performed to support its licensing activities. Under initiating phase of hypothetic core disruptive accident (HCDA) conditions, the molten metal could be better dispersed and fragmented into the coolant channel than in the case of using oxide fuel. This safety strategy provides negative reactivity driven by a good dispersion of melt. If the coolant channel does not sufficient coolability, the severe recriticality would occur within the core region. Thus, it is important to examine the extent of melt fragmentation. The fragmentation behaviors of melt are closely related to a formation of debris shape. Once the debris shape is formed through the fragmentation process, its coolability is determined by the porosity or thermal conductivity of the melt. There were very limited studies for transient irradiation experiments of the metal fuel. These studies were performed by Transient Reactor Test Facility (TREAT) M series tests in U.S. The TREAT M series tests provided basic information of metal fuel performance under transient conditions. The effect of melt injection mass was evaluated in terms of the fragmentation behaviors of melt. These behaviors seemed to be similar between single-pin and multi-pins failure condition. However, the more melt was agglomerated in case of multi-pins failure.

  20. Case for integral core-disruptive accident analysis

    International Nuclear Information System (INIS)

    Luck, L.B.; Bell, C.R.

    1985-01-01

    Integral analysis is an approach used at the Los Alamos National Laboratory to cope with the broad multiplicity of accident paths and complex phenomena that characterize the transition phase of core-disruptive accident progression in a liquid-metal-cooled fast breeder reactor. The approach is based on the combination of a reference calculation, which is intended to represent a band of similar accident paths, and associated system- and separate-effect studies, which are designed to determine the effect of uncertainties. Results are interpreted in the context of a probabilistic framework. The approach was applied successfully in two studies; illustrations from the Clinch River Breeder Reactor licensing assessment are included

  1. 29 CFR 1960.70 - Reporting of serious accidents.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Reporting of serious accidents. 1960.70 Section 1960.70... accidents. Agencies must provide the Office of Federal Agency Programs with a summary report of each fatal and catastrophic accident investigation. The summaries shall address the date/time of accident, agency...

  2. WASA-BOSS. Development and application of Severe Accident Codes. Evaluation and optimization of accident management measures. Subproject F. Contributions to code validation using BWR data and to evaluation and optimization of accident management measures. Final report

    International Nuclear Information System (INIS)

    Di Marcello, Valentino; Imke, Uwe; Sanchez Espinoza, Victor

    2016-09-01

    The exact knowledge of the transient course of events and of the dominating processes during a severe accident in a nuclear power station is a mandatory requirement to elaborate strategies and measures to minimize the radiological consequences of core melt. Two typical experiments using boiling water reactor assemblies were modelled and simulated with the severe accident simulation code ATHLET-CD. The experiments are related to the early phase of core degradation in a boiling water reactor. The results reproduce the thermal behavior and the hydrogen production due to oxidation inside the bundle until relocation of material by melting. During flooding of the overheated assembly temperatures and hydrogen oxidation are under estimated. The deviations from the experimental results can be explained by the missing model to simulate bore carbide oxidation of the control rods. On basis of a hypothetical loss of coolant accident in a typical German boiling water reactor the effectivity of flooding the partial degraded core is investigated. This measure of mitigation is efficient and prevents failure of the reactor pressure vessel if it starts before molten material is relocated into the lower plenum. Considerable amount of hydrogen is produced by oxidation of the metallic components.

  3. The Importance of Bloodstain Pattern Analysis in the Investigation of Road Traffic Accidents: A Case Report

    Directory of Open Access Journals (Sweden)

    Younis M. Albalooshi

    2015-12-01

    Full Text Available Bloodstain pattern analysis has become a field of specialization in Forensic sciences and plays an important role in the reconstruction of events at a crime scene. Research, books, and articles have been published on the analysis and interpretation of bloodstain patterns We present a case study of a road traffic accident in which bloodstain pattern analysis helped us to solve the discrepancy between reports produced by forensic examiners and by the forensic biology department. The case was of a 22-year-old man who died immediately and a 31- year-old woman who survived a road traffic accident. They were both found outside their overturned car and it was impossible to ascertain from initial observations which of the victims was driving the car at the time of the accident. An external examination of the man revealed multiple injuries, and the cause of his death was severe brain injury. The woman survived with a fracture of the forearm, dislocated clavicle bone, and other minor injuries. After initial examination of the car and based on the pattern of injuries the deceased received, forensic examiner concluded that the man was the driving the car at the time of accident. On the other hand, the forensic DNA analysis of bloodstains obtained from the driver's seat matched that of the woman, suggesting that she was the driver. This apparent discrepancy directed the forensic examiner to carry out a bloodstain pattern analysis on the driver's seat. The bloodstain pattern analysis helped resolve the discrepancy and enabled the investigators to identify the driver correctly. This case report emphasizes the importance of bloodstain pattern analysis in the reconstruction of cases involving road traffic accidents.

  4. Investigation of accident management procedures related to loss of feedwater and station blackout in PSB-VVER integral test facility

    Energy Technology Data Exchange (ETDEWEB)

    Bucalossi, A. [EC JRC, (JRC F.5) PO Box 2, 1755 ZG Petten (Netherlands); Del Nevo, A., E-mail: alessandro.delnevo@enea.it [ENEA, C.R. Brasimone, 40032 Camugnano (Italy); Moretti, F.; D' Auria, F. [GRNSPG, Universita di Pisa, via Diotisalvi 2, 56100 Pisa (Italy); Elkin, I.V.; Melikhov, O.I. [Electrogorsk Research and Engineering Centre, Electrogorsk, Moscow Region (Russian Federation)

    2012-09-15

    Highlights: Black-Right-Pointing-Pointer Four integral test facility experiments related to VVER-1000 reactor. Black-Right-Pointing-Pointer TH response of the VVER-1000 primary system following total loss of feedwater and station blackout scenarios. Black-Right-Pointing-Pointer Accident management procedures in case of total loss of feedwater and station blackout. Black-Right-Pointing-Pointer Experimental data represent an improvement of existing database for TH code validation. - Abstract: VVER 1000 reactors have some unique and specific features (e.g. large primary and secondary side fluid inventory, horizontal steam generators, core design) that require dedicated experimental and analytical analyses in order to assess the performance of safety systems and the effectiveness of possible accident management strategies. The European Commission funded project 'TACIS 2.03/97', Part A, provided valuable experimental data from the large-scale (1:300) PSB-VVER test facility, investigating accident management procedures in VVER-1000 reactor. A test matrix was developed at University of Pisa (responsible of the project) with the objective of obtaining the experimental data not covered by the OECD VVER validation matrix and with main focus on accident management procedures. Scenarios related to total loss of feed water and station blackout are investigated by means of four experiments accounting for different countermeasures, based on secondary cooling strategies and primary feed and bleed procedures. The transients are analyzed thoroughly focusing on the identification of phenomena that will challenge the code models during the simulations.

  5. Lessons learnt from clean-up of urban area after Chernobyl accident

    International Nuclear Information System (INIS)

    Zlobenko, Borys

    2008-01-01

    The accident at Chernobyl NPP showed that huge territories including densely populated areas can be exposed to contamination as a result of unforeseen circumstances. The Chernobyl accident forced reconsidering of many regulations in the field of population protection and was a powerful incentive to development of many applied sciences. In 1992-1996, an international team of scientists carried out investigations on ECP-4 project 'Strategies of Decontamination'. Including of an independent sub-project 'Urban environment and countermeasures' into the project of French-German initiative on Chernobyl 'Radioecology' was the extension of work on study of urban environment contamination. The aim of the projects ware to synthesize the large body of experimental data received during elimination of the consequences of the Chernobyl accident and in the course of special studies carried out in former USSR and later in Ukraine, Belarus and Russia, and prediction on this basis of radionuclide behavior in the urban environment. In 2003 the EMRAS (Environmental Modelling for Radiation Safety) project was organized by the International Atomic Energy Agency (IAEA). The Urban Remediation Working Group of the EMRAS has focused on the assessment of the effectiveness of countermeasures employed in urban settings after releases of radioactivity. This review considers results of principally Ukrainian, Russian, and Belarus researchers who worked on these projects. Over the 20-year period a number of publications have reviewed the effectiveness of countermeasures, particularly those used after the Chernobyl accident. The general principles of radiological protection are based on radiation doses, intervention levels and effective countermeasures. Decontamination of densely built-up cities constructed of various building materials with total surface area significantly exceeding the administrative city area is an extremely difficult task. In the Late-Phase Response, 'classical' radiological

  6. Fukushima nuclear accident independent investigation commission by the National Diet of Japan

    International Nuclear Information System (INIS)

    Kurokawa, Kiyoshi

    2013-01-01

    After the Fukushima nuclear accident, Independent Investigation Commission (IIC) was firstly established in constitutional government by the National Diet of Japan. This article described recognition of its necessity, its setup process, its framework with start from almost zero and about 6 months period and time, its basic way to proceed investigation and several obstacles and hardships, significance of openness to the public, web's communication and simultaneous interpretation (transparency) and basic philosophy of the report. Further significance of Diet's IIC in the democratic system and evaluation of the report were added. As a problem of separation of three powers in Japan, specific recommendations to the legislation of IIC and their future evaluation, nation's governance system problem and social responsibility of scientists and others were also discussed. If Japan were not to be changed after the disaster, Japanese future might be unreliable. (T. Tanaka)

  7. Importance of risk communication during and after a nuclear accident.

    Science.gov (United States)

    Perko, Tanja

    2011-07-01

    Past nuclear accidents highlight communication as one of the most important challenges in emergency management. In the early phase, communication increases awareness and understanding of protective actions and improves the population response. In the medium and long term, risk communication can facilitate the remediation process and the return to normal life. Mass media play a central role in risk communication. The recent nuclear accident in Japan, as expected, induced massive media coverage. Media were employed to communicate with the public during the contamination phase, and they will play the same important role in the clean-up and recovery phases. However, media also have to fulfill the economic aspects of publishing or broadcasting, with the "bad news is good news" slogan that is a well-known phenomenon in journalism. This article addresses the main communication challenges and suggests possible risk communication approaches to adopt in the case of a nuclear accident. Copyright © 2011 SETAC.

  8. Investigation into slipping and falling accidents and materials handling in the South African mining industry.

    CSIR Research Space (South Africa)

    Schutte, PC

    2003-03-01

    Full Text Available The objective of this study was to analyze information on slipping and falling accidents and materials handling activities in the South African mining industry. Accident data pertaining to slipping, falling and materials handling accidents...

  9. A review of severe accident assessment

    International Nuclear Information System (INIS)

    Kawashima, Kei

    2000-01-01

    One of the most difficult problems on evaluation of external costs on nuclear power generation is value on a severe accident risk. Once forming a severe accident, its effect is very important and extends to a wide range, to give a lot of damages. It is a main area of study on externality of energy to compare various risks by means of price conversion at unit kWh. Here was outlined on research examples on main severe accident risks before then. A common fact on estimation cost such research examples is to limit it to direct cost (mainly to health damage) at accident phenomenon. As an actual problem, it is very difficult to substantially quantify such parameters because of basically belonging to social psychology. It is due to no finding out decisive evaluation method on this problem to be adopted conventional EED (Expert Expected Damages) approach in the ExternE Phase III, either. (G.K.)

  10. Analysis of Loss-of-Coolant Accidents in the NIST Research Reactor - Early Phase

    Energy Technology Data Exchange (ETDEWEB)

    Baek, Joo S.; Diamond, David

    2016-12-06

    A study of the fuel temperature during the early phase of a loss-of-coolant accident (LOCA) in the NIST research reactor (NBSR) was completed. Previous studies had been reported in the preliminary safety analysis report for the conversion of the NBSR from high-enriched uranium (HEU) fuel to low-enriched (LEU) fuel. Those studies had focused on the most vulnerable LOCA situation, namely, a double-ended guillotine break in the time period after reactor trip when water is drained from either the coolant channels inside the fuel elements or the region outside the fuel elements. The current study fills in a gap in the analysis which is the early phase of the event when there may still be water present but the reactor is at power or immediately after reactor trip and pumps have tripped. The calculations were done, for both the current HEU-fueled core and the proposed LEU core, with the TRACE thermal-hydraulic systems code. Several break locations and different break sizes were considered. In all cases the increase in the clad (or fuel meat) temperature was relatively small so that a large margin to the temperature threshold for blistering (the Safety Limit for the NBSR) remained.

  11. Consequences of severe nuclear accidents in Europe

    Science.gov (United States)

    Seibert, Petra; Arnold, Delia; Mraz, Gabriele; Arnold, Nikolaus; Gufler, Klaus; Kromp-Kolb, Helga; Kromp, Wolfgang; Sutter, Philipp

    2013-04-01

    agreement with Chernobyl experiences. However, emergency planning presently is still often focussing on too small areas. In reality, almost all of Europe should be prepared for nuclear disaster. The project investigated also the effect of a simple phase-out scenario. A regional phase-out policy is effective for reducing or even eliminating high damage in the respective regions. It should also be mentioned that risk distribution depends strongly on accident frequency, but this parameter is highly uncertain. The work in flexRISK was funded by the Austrian Climate and Energy Fund (KLI.EN).

  12. Perspectives on phenomenology and simulation of severe accident in light water reactors

    International Nuclear Information System (INIS)

    Sugimoto, Jun

    2014-01-01

    Severe accident phenomena in light water reactors (LWRs) are generally characterized by their physically and chemically complex processes involved with high temperature core melt, multi-component and multi-phase flows, transport of radioactive materials and sometimes highly non-equilibrium state. Severe accident phenomenology is usually categorized into four phases; (1) fuel degradation, (2) in-vessel phenomena, (3) ex-vessel phenomena and (4) fission product release and transport. Among these, ex-vessel phenomena consist of five subcategories; 1) direct containment heating, 2) fuel coolant interaction (steam explosion), 3) molten core concrete interaction, 4) hydrogen behaviour and control and 5) containment failure/leakage. In the field of simulation of severe accident, severe accident analytical codes have been developed in the United States, EU and Japan, such as MAAP, MELCOR, ASTEC, THALES and SAMPSON. Many different kinds of analytical codes for the specific severe accident phenomena have also been developed worldwide. After the accident at Fukushima Daiichi Nuclear Power Station, review of severe accident research issues has been conducted and several issues are reconsidered, such as effects of BWR core degradation behaviors, sea water injection, pool scrubbing under rapid depressurization, containment failure/leakage and re-criticality. Some new experimental and analytical efforts have been started after the Fukushima accident. The present paper describes the perspectives on phenomenology and simulation of severe accident in LWRs, with the emphasis of insights obtained in the review of Fukushima accident. (author)

  13. Evolution of regulation related to the Chernobyl accident

    International Nuclear Information System (INIS)

    Anisimova, L.I.; Belyaev, S.T.; Demin, V.F.; Kutkov, V.A.

    1997-01-01

    The 'classical' pattern of radiological protection considers mostly the radiation factor. The choice of protective measures is governed by effective doses, both received and projected, also established and adopted intervention levels, respectively. The effectiveness of the countermeasures is measured by the value of an averted dose. The lessons learned from Chernobyl show that the above single-factor pattern of radiological protection is appropriate only at an acute post-accident phase. In that period (days and weeks after an accident) the radiation factor prevails and bas countermeasures are proceeded from prearranged intervention levels. At the next long-term phase (months, years after the accident) there is enough time for a human factor to come fully into force. This factor implies the psychological and social acceptance, by the public, of the countermeasures to be implemented. It implies the response of the public to their implementation, the reflection of the situation by mass media, the reaction of Legislative and Administrative Bodies too

  14. Accident management for severe accidents

    International Nuclear Information System (INIS)

    Bari, R.A.; Pratt, W.T.; Lehner, J.; Leonard, M.; Disalvo, R.; Sheron, B.

    1988-01-01

    The management of severe accidents in light water reactors is receiving much attention in several countries. The reduction of risk by measures and/or actions that would affect the behavior of a severe accident is discussed. The research program that is being conducted by the US Nuclear Regulatory Commission focuses on both in-vessel accident management and containment and release accident management. The key issues and approaches taken in this program are summarized. 6 refs

  15. Problems of two-phase flows in water cooled and moderated reactors

    International Nuclear Information System (INIS)

    Syu, Yu.

    1984-01-01

    Heat exchange in two-phase flows of coolant in loss of coolant accidents in PWR and BWR reactors has been investigated. Three main stages of accident history are considered: blowdown, reflooding using emergency core cooling system and rewetting. Factors, determining the rate of coolant leakage and the rate of temperature increase in fuel cladding during blowdown, processes of vapour during reflooding and liquid priming by vapour during rewetting, are discussed

  16. Theoretical and experimental investigations on the behaviour of iodine during severe accidents: organic iodide, iodine/silver reaction, iodine/iron reaction. Pt. 4: organic iodide. Final report

    International Nuclear Information System (INIS)

    Hellmann, S.; Greger, G.U.; Funke, F.; Bleier, A.; Zeeh, W.

    1995-11-01

    Analysis of the consequences of severe accidents in nuclear power plants requires knowledge of the behaviour of radionuclides relevant from the radiological viewpoint. The role played by radioiodine is particularly important. In the current modelling of iodine behaviour the heterogeneous formation of organic iodide is not adequately taken into consideration owing to a lack of data or insufficient accuracy of data. This project is intended to eliminate some gaps in critical areas. This final report, part 4, describes the tests carried out in the two relevant areas - heterogeneous formation of organic coatings in the gas phase (containment atmosphere) - heterogeneous formation of organic iodide at organic coatings in aqueous phase (containment sump). Moreover, modelling suggestions how to include the resulting knowledge in the iodine accident behaviour code IMPAIR are given. (orig.) [de

  17. Investigation of an accident in a resins manufacturing site: The role of accelerator on polymerisation of methyl methacrylate

    Energy Technology Data Exchange (ETDEWEB)

    Casson, Valeria, E-mail: valeria.casson.moreno@gmail.com [Alma Mater Studiorum—Università di Bologna, Dipartimento di Ingegneria Chimica, Mineraria e delle Tecnologie Ambientali, Bologna (Italy); Dipartimento di Ingegneria Industriale, Via Marzolo 9, 35131 Padova (Italy); Snee, Tim, E-mail: Tim.Snee@hsl.gsi.gov.uk [Health and Safety Laboratory, Harpur Hill, Buxton, Derbyshire SK 179 JN (United Kingdom); Maschio, Giuseppe, E-mail: giuseppe.maschio@unipd.it [Dipartimento di Ingegneria Industriale, Via Marzolo 9, 35131 Padova (Italy)

    2014-04-01

    Highlights: • The accelerator produces an increase in the initial rate of polymerisation. • The accelerator increases the extent of polymerisation in certain conditions. • The accelerator decreases the induction time due to the presence of inhibitor. • Runaway reaction is more likely to occur in presence of the accelerator. • The experimental data support the hypothesis about the accident. - Abstract: This paper analyzes the effect of an accelerator on the polymerisation of methyl methacrylate (MMA). This study is based on the results of an investigation of an accident in a manufacturing site for resins located in the United Kingdom. As sequence of event to cause the accident the following was assumed: during an unattended batch process a runaway undesired polymerisation of methyl methacrylate occurred, generating rapid vaporisation of monomer, which in contact with an ignition source, led to an explosion followed by a fire. Since no initiator for the polymerisation reaction had been jet added to the blend, it was supposed that the accelerator contributed to the onset of the undesired polymerisation. The accelerator involved in the accident t has therefore been tested by differential scanning calorimetry and adiabatic calorimetry. The experimental data allowed the authors to prove the hypothesis made and to define safety ranges for the polymerisation reaction.

  18. Our reflections and lessons from the Fukushima Nuclear Accident

    International Nuclear Information System (INIS)

    Matsuoka, Takeshi; Sawada, Takashi; Yagawa, Genki

    2017-01-01

    In order to investigate the cause of the accident that began on March 11, 2011 at the Tokyo Electric Power Company Fukushima Daiichi Nuclear Power Station, the Science Council of Japan set an investigation committee, the 'Sub-Committee on Fukushima Nuclear Accident (SCFNA)' under the Comprehensive Synthetic Engineering Committee. The committee has published a record entitled 'Reflections and Lessons from the Fukushima Nuclear Accident, (1st report)'. There are still many items about the accident for which the details are not clear. It is important to discuss the reasons why the severe accident could not be prevented and the possibilities that there might have been other proper operations and accident management to prevent or lessen the severity of the accident than those adopted at the time. SCFNA decided to continue its investigation by setting up our working group called the 'Working Group on Fukushima Nuclear Accident'. Our working group have published 'Reflection and Lessons from the Fukushima Nuclear Accident (2nd Report)'. We investigated the issues of specific units. Unit 1 were validity of the operation of the isolation condenser, whether or not a loss of coolant accident occurred due to a failure of the cooling piping system by the seismic ground motion, and the cause of the loss of the emergency AC power supply, Unit 2 was the reason why a large amount of radioactive materials was emitted to the environment although the reactor building did not explode, Unit 3 was the reasons why the operator stopped running the high pressure coolant injection system, and Units 1 to 3 was validity of the venting operation. These items were considered to be the key issues in these units that would have prevented progression to the severe accident. (author)

  19. International seminar on Post nuclear accident from May 5 and 6, 2011 - The CODIRPA progresses

    International Nuclear Information System (INIS)

    Birraux, Claude; Lacoste, Andre-Claude; Lachaume, Jean-Luc; Mehl-Auget, Isabelle; Godet, Jean-Luc; Dandrieux, Geraldine; Delmestre, Alain; Gallay, Florence; Niel, Jean-Christophe; Bataille, Christian; Dederen, Guillaume; Guenon, Catherine; Repussard, Jacques; Cessac, Bruno; Champion, Didier; Miniere, Dominique; Andrieux, Jean-Luc; Bernard, Herve; Delalonde, Jean-Claude; Calafat, Alexis; Demet, Michel; Barbey, Pierre; Janssens, Augustin; Lazo, Ted; Ahier, Brian; Ugletveit, Finn; Guerson, Nathalie; Riou, Jeanine; Robert, Joel; Pirard, Philippe; Gerbeaux, Jerome; Foix, Olivier; Le Gac, Alain; Lahaye, Thierry; Wiest, Annick; Crouail, Pascal; Lochard, Jacques; Villers, Anita; Eberbach, Friedrich; Murith, Christophe; Samain, Jean-Paul; Javanni, Jean; Averin, Viktor; Trafimchik, Zoia; Liland, Astrid; Durand, Francois

    2011-01-01

    The objective of the seminar is the anticipation of the radiological emergency situations to limit the consequences of nuclear accidents. The Steering Committee to manage the post-accident of a Nuclear Accident or Radiological Emergency (CODIRPA) was started in June 2005 by the French nuclear safety authority (ASN), and was charged with developing French policy for the management of the post-accident phase of a nuclear or radiological accident situation. An ambitious program mobilising more than 200 people was put in place, including representatives of relevant national administrations and their local representatives, utility and industrial representatives, technical service organisations, nuclear safety authorities from bordering countries to France, NGOs and local elected officials. On December 2007, the previous seminar had constructively challenged the work of CODIRPA with international experiences and analysis. The 2011 seminar, organized by ASN with the support of the Parliamentary Office for the Evaluation of Scientific Choices and Technologies (OPECST), reports on the progress of the national doctrine's construction. The National Preparedness Guide for Exiting the Emergency Phase and drawn lessons concerning its local adaptation by regional and local community governmental organizations was presented at this occasion. The parliamentary mission headed by OPECST on the safety of nuclear installations holds its first public hearing on May 5, 2011. The seminar provides an opportunity for members of the parliamentary mission to learn about crisis management and post-accident of the major nuclear accident occurred in Japan at Fukushima. This document comprises a complete FR/EN detailed synthesis of the seminar followed by the recommendations of CODIRPA (in French) and by the slides of the available presentations for each session: Opening of the meeting; Session 1: National Preparedness Guide for Exiting the Emergency Phase; Session 2: Development of the

  20. Technical description of the test section SUCOT to investigate a water/steam two-phase flow

    International Nuclear Information System (INIS)

    Daubner, M.; Janssens-Maenhout, G.; Knebel, J.U.

    2002-02-01

    Within the POOLTHY Project of the European Union (Euratom Fourth Framework Programme contract FJ4J-CT95-0003) an active/passive concept (SUCO-Programme) was investigated which controls the heat removal after a potential core melt-down accident in an evolutionary light water reactor by spreading and stabilising the core melt in the reactor sump and flooding the melt with sump water from above. The experiments were performed in the test facility SUCOT which was designed and erected at the Institute for Nuclear and Energy Technologies (IKET). The report gives an overview on the SUCO-Programme and the scaling analysis, which was applied to design the test facility SUCOT. A detailed technical description of the test facility SUCOT is given, in which the natural circulation driven two-phase flow within the reactor sump and relevant phenomena such as flow boiling, disperse bubbly flow with and without mass transfer, and geysering are investigated. The major components of the test facility, the three-loop system and the instrumentation are described. Finally, a perspective for future application of the gained knowledge is given. (orig.) [de

  1. A systematic process for developing and assessing accident management plans

    International Nuclear Information System (INIS)

    Hanson, D.J.; Blackman, H.S.; Meyer, O.R.; Ward, L.W.

    1991-04-01

    This document describes a four-phase approach for developing criteria recommended for use in assessing the adequacy of nuclear power plant accident management plans. Two phases of the approach have been completed and provide a prototype process that could be used to develop an accident management plan. Based on this process, a preliminary set of assessment criteria are derived. These preliminary criteria will be refined and improved when the remaining steps of the approach are completed, that is, after the prototype process is validated through application. 9 refs., 10 figs., 7 tabs

  2. 49 CFR 837.3 - Published reports, material contained in the public accident investigation dockets, and accident...

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Published reports, material contained in the... OF RECORDS IN LEGAL PROCEEDINGS § 837.3 Published reports, material contained in the public accident... submitted, in writing, to the Public Inquiries Branch. Demands for specific published reports and studies...

  3. Investigation Effect of Biorhythm on Work-Related Accidents in The Metal Industry (A Short Report

    Directory of Open Access Journals (Sweden)

    Ehsanollah Habibi

    2016-07-01

    Full Text Available Biorhythm is one of the newest subjects in the field of cognition of mental ergonomics which can be very effective in reduction of work-related accidents or mistakes with no apparent reason. With evaluating Biorhythm individuals can intervention action to reduce job accidents carried out. Thus, the aim of this study was to determine the relationship Biorhythm and work-related accidents in the metal industry. This research is a cross-sectional and analytical-descriptive in the metal industrial Isfahan city of 120 work-related accidents during 2015. The required information was collected from available documents in HSE unit of the company biorhythm charts were drawn based on a date of accidents and participants birthdays, using natural Biorhythm Software V3.02 Conduct. Finally، the data were analyzed using spss version 20 and descriptive statistics.This study showed that the frequency of accidents in critical days and negative section of physical cycle was more than expected. Also the frequency of accidents in critical days and negative section of emotional and intellectual cycles was less than expected. Most type of injury, including cuts to 35.8 percent and the lowest type of injury was torsion with 5 percent. Most limb injury, hands and fingers with 51.7 percent and the lowest limb injury were back at 2.5 percent. Accidents outbreak in physical cycles was 38.3 percent. These 120 accidents in additionally were causing 120 loss of working days in effect accident. Most percent of loss of working days were for 20 to 30 days with of 39.2 percent. Most percent of loss of working days were for 20 to 30 days with of 39.2 percent. Due to the physical nature of the work activities in the metal industry can be stated that the study showed that in physical work activities, frequency of accidents in critical days and negative section of physical cycle in which the person is not physically ready to do the job was more than expected. Therefore, by training

  4. 49 CFR 225.11 - Reporting of accidents/incidents.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Reporting of accidents/incidents. 225.11 Section... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD ACCIDENTS/INCIDENTS: REPORTS CLASSIFICATION, AND INVESTIGATIONS § 225.11 Reporting of accidents/incidents. Each railroad subject to this part shall submit to FRA...

  5. Investigation of the behavior of TMI-2 containment structure for hydrogen burn accidents

    International Nuclear Information System (INIS)

    Kamil, H.; Chen, M.C.; Kost, G.; Miller, A.

    1981-01-01

    The paper describes the following main tasks performed as part of this investigation: 1) definition of design; 2) identification of conservatisms in design; 3) review of load functions; 4) determination of preliminary capacity of the containment. The basic design criteria, acceptance criteria, and analytical procedures which formed the basis of the original containment design were first briefly reviewed. The conservatisms in the various assumptions and parameters used in the design and analysis of the containment were then identified. The postulated load functions for hydrogen burn accidents used in the evaluation of the containment capacity were then reviewed. (orig./HP)

  6. Preliminary safety analysis of the PWR with accident-tolerant fuels during severe accident conditions

    International Nuclear Information System (INIS)

    Wu, Xiaoli; Li, Wei; Wang, Yang; Zhang, Yapei; Tian, Wenxi; Su, Guanghui; Qiu, Suizheng; Liu, Tong; Deng, Yongjun; Huang, Heng

    2015-01-01

    Highlights: • Analysis of severe accident scenarios for a PWR fueled with ATF system is performed. • A large-break LOCA without ECCS is analyzed for the PWR fueled with ATF system. • Extended SBO cases are discussed for the PWR fueled with ATF system. • The accident-tolerance of ATF system for application in PWR is illustrated. - Abstract: Experience gained in decades of nuclear safety research and previous nuclear accidents direct to the investigation of passive safety system design and accident-tolerant fuel (ATF) system which is now becoming a hot research point in the nuclear energy field. The ATF system is aimed at upgrading safety characteristics of the nuclear fuel and cladding in a reactor core where active cooling has been lost, and is preferable or comparable to the current UO 2 –Zr system when the reactor is in normal operation. By virtue of advanced materials with improved properties, the ATF system will obviously slow down the progression of accidents, allowing wider margin of time for the mitigation measures to work. Specifically, the simulation and analysis of a large break loss of coolant accident (LBLOCA) without ECCS and extended station blackout (SBO) severe accident are performed for a pressurized water reactor (PWR) loaded with ATF candidates, to reflect the accident-tolerance of ATF

  7. Study on confinement function of reactor containment during late phase severe accident

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    During a severe accident reactor containment integrity is maintained by accident management. However, gas leakage from containment is inevitable after the severe accident. A large amount of hydrogen and rare gases are produced due to core damage or melting. These non-condensable gases cause the containment pressure much higher than atmospheric pressure even after residual heat removal system recovery especially for BWR with smaller containment volume. Besides, iodine confined in water pool is re-evaporated under radiation field. The present study consists of realistic evaluation of fission products source term inside containment, quantitative evaluation of iodine re-evaporation effect and the experimental study of hydrogen treatment in BWR using ammonia production method by catalyst. Activities in fiscal year 2012 are that modification of MELCOR fission product chemical model was done and verified by experimental data, and that effects of CsI on ammonia production rate for Ru catalyst were conducted. (author)

  8. Active and passive vehicle safety at Volkswagen accident research

    Energy Technology Data Exchange (ETDEWEB)

    Jungmichel, M.; Stanzel, M.; Zobel, R. [Volkswagen AG, Wolfsburg (Germany)

    2001-07-01

    Accident Analysis is an efficient means of improving vehicle passive safety and is used frequently and intensively. However, reliable data on accident causation is much more difficult to obtain. In most cases, one or more of the persons involved in an accident will face litigation and therefore are reluctant to provide the information that is essential to researchers. In addition, antilock brakes in almost every current vehicle have caused certain characteristic evidence, i.e. skid marks, to appear much less frequently than before. However, this evidence provides valuable information for assessing the reaction of the driver and his attempt to avoid the accident. In order to implement strategies of accident avoidance, accident causation must first be fully understood. Therefore, one of the assignments of the Volkswagen Accident Research Unit is to interpret global statistics, as well as to study single cases in order to come up with strategies for collision avoidance or mitigation. Currently, our primary concern is focused on active vehicle safety by researching vehicle behavior in the pre-crash phase. (orig.)

  9. Contributing factors in construction accidents.

    Science.gov (United States)

    Haslam, R A; Hide, S A; Gibb, A G F; Gyi, D E; Pavitt, T; Atkinson, S; Duff, A R

    2005-07-01

    This overview paper draws together findings from previous focus group research and studies of 100 individual construction accidents. Pursuing issues raised by the focus groups, the accident studies collected qualitative information on the circumstances of each incident and the causal influences involved. Site based data collection entailed interviews with accident-involved personnel and their supervisor or manager, inspection of the accident location, and review of appropriate documentation. Relevant issues from the site investigations were then followed up with off-site stakeholders, including designers, manufacturers and suppliers. Levels of involvement of key factors in the accidents were: problems arising from workers or the work team (70% of accidents), workplace issues (49%), shortcomings with equipment (including PPE) (56%), problems with suitability and condition of materials (27%), and deficiencies with risk management (84%). Employing an ergonomics systems approach, a model is proposed, indicating the manner in which originating managerial, design and cultural factors shape the circumstances found in the work place, giving rise to the acts and conditions which, in turn, lead to accidents. It is argued that attention to the originating influences will be necessary for sustained improvement in construction safety to be achieved.

  10. Approach to accident management in RBMK-1500

    International Nuclear Information System (INIS)

    Kaliatka, A.; Urbonavicius, E.; Uspuras, E.

    2008-01-01

    In order to ensure the safe operation of the nuclear power plants accident management programs are being developed around the world. These accident management programs cover the whole spectrum of accidents, including severe accidents. A lot of work is done to investigate the severe accident phenomena and implement severe accident management in NPPs with vessel-type reactors, while less attention is paid to channel-type reactors CANDU and RBMK. Ignalina NPP with RBMK-1500 reactor has implemented symptom based emergency operation procedures, which cover management of accidents until the core damage and do not extend to core damage region. In order to ensure coverage of the whole spectrum of accidents and meet the requirements of IAEA the severe accident management guidelines have to be developed. This paper presents the basic principles and approach to management of beyond design basis accidents at Ignalina NPP. In general, this approach could be applied to NPPs with RBMK-1000 reactors that are available in Russia, but the design differences should be taken into account

  11. Development of source term PIRT of Fukushima Daiichi NPPs accident

    International Nuclear Information System (INIS)

    Suehiro, S.; Okamoto, K.

    2017-01-01

    The severe accident evaluation committee of AESJ (Atomic Energy Society of Japan) developed the thermal hydraulic PIRT (Phenomena Identification and Ranking Table) and the source term PIRT based on findings during the Fukushima Daiichi NPPs accident. These PIRTs aimed to explore the debris distribution and the current condition in the NPPs with high accuracy and to extract higher priority from the aspect of the sophistication of the analytical technology to predict the severe accident phenomena by the code. The source term PIRT was divided into 3 phases for the time domain and 9 categories for the spatial domain. The 68 phenomena were extracted and the importance from viewpoint of the source term was ranked through brainstorming and discussion. This paper describes the developed source term PIRT list and summarized the high ranked phenomena in each phase. (author)

  12. Early measurements after the Goiania accident

    International Nuclear Information System (INIS)

    Godoy, J.M.; Moreira, M.C.F.; Fonseca, E.S. da

    2000-01-01

    During the early, intermediate late phase of the Goiania radiological accident different survey methods were applied involving aerial and terrestrial (using a car and directly in the field) inspections. The present work aims to show how and when they were and the obtained results. Furthermore, the 137 Cs concentration in soils were determined using a NaI(Tl) spectrometer during the accident, and also in Rio de Janeiro in a high resolution gamma spectrometry system. The concordance among those results and the validity of the 137 Cs measurements in soil with NaI(TI) are demonstrated. (author)

  13. Database on aircraft accidents

    International Nuclear Information System (INIS)

    Nishio, Masahide; Koriyama, Tamio

    2012-09-01

    The Reactor Safety Subcommittee in the Nuclear Safety and Preservation Committee published the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' as the standard method for evaluating probability of aircraft crash into nuclear reactor facilities in July 2002. In response to the report, Japan Nuclear Energy Safety Organization has been collecting open information on aircraft accidents of commercial airplanes, self-defense force (SDF) airplanes and US force airplanes every year since 2003, sorting out them and developing the database of aircraft accidents for latest 20 years to evaluate probability of aircraft crash into nuclear reactor facilities. This year, the database was revised by adding aircraft accidents in 2010 to the existing database and deleting aircraft accidents in 1991 from it, resulting in development of the revised 2011 database for latest 20 years from 1991 to 2010. Furthermore, the flight information on commercial aircrafts was also collected to develop the flight database for latest 20 years from 1991 to 2010 to evaluate probability of aircraft crash into reactor facilities. The method for developing the database of aircraft accidents to evaluate probability of aircraft crash into reactor facilities is based on the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' described above. The 2011 revised database for latest 20 years from 1991 to 2010 shows the followings. The trend of the 2011 database changes little as compared to the last year's one. (1) The data of commercial aircraft accidents is based on 'Aircraft accident investigation reports of Japan transport safety board' of Ministry of Land, Infrastructure, Transport and Tourism. 4 large fixed-wing aircraft accidents, 58 small fixed-wing aircraft accidents, 5 large bladed aircraft accidents and 114 small bladed aircraft accidents occurred. The relevant accidents for evaluating

  14. Heat and fluid flow in accident of Fukushima Daiichi Nuclear Power Plant, Unit 2. Accident scenario based on thermodynamic model

    International Nuclear Information System (INIS)

    Maruyama, Shigenao

    2012-01-01

    An accident scenario of Fukushima Daiichi Nuclear Power Plant, Unit 2 is analyzed from the data open to the public. Phase equilibrium process model was introduced that the vapor and water are at saturation point in the vessels. Proposed accident scenario agrees very well with the data of the plant parameters obtained just after the accident. The estimation describes that the rupture time of the reactor pressure vessel (RPV) was at 22:50 14/3/2011. The estimation shows that the rupture time of the pressure containment vessel (RCP) was at 7:40 15/3/2011. These estimations are different from the ones by TEPCO, however; many measured evidences show good accordance with the present scenario. (author)

  15. A Scoping Analysis Of The Impact Of SiC Cladding On Late-Phase Accident Progression Involving Core–Concrete Interaction

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, M. T. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-11-01

    The overall objective of the current work is to carry out a scoping analysis to determine the impact of ATF on late phase accident progression; in particular, the molten core-concrete interaction portion of the sequence that occurs after the core debris fails the reactor vessel and relocates into containment. This additional study augments previous work by including kinetic effects that govern chemical reaction rates during core-concrete interaction. The specific ATF considered as part of this study is SiC-clad UO2.

  16. Approach and results of the PWR low power and shutdown accident frequencies program - Coarse screening analysis for Surry

    International Nuclear Information System (INIS)

    Chu, T.L.; Musicki, Z.; Luckas, W.; Wong, S.M.; Fitzpatrick, R.G.

    1991-01-01

    Traditionally, probabilistic risk analyses of severe accidents in nuclear power plants have limited themselves to consideration of the set of initiating events occurring during full power operation. However, some analyses of accident initiators during low power, shutdown, and other modes of plant operation other than full power have been performed. These studies as well as the Chernobyl accident and recent operating experience at US pressurized water reactors (PWRs) suggested that risks during low power and shutdown could be significant. As such, the analysis of the frequencies, consequences, and risks of these accidents was identified as one task in the Nuclear Regulatory Commission staff's study of the implications of the Chernobyl accident to US commercial nuclear power plants. This program is an ongoing high priority effort at Brookhaven National Laboratory (BNL). The scope includes a Level 1 probabilistic risk assessment (PRA) with internal fire and flood for Surry Unit 1 (PWR). This program is also closely coupled to a parallel project for the Grand Gulf plant (BWWR) being conducted by SNL. The program is being performed in two phases. Phase 1 represents a coarse screening analysis to identify dominant accident scenarios as well as risk dominant plant configurations and plant operating states. In Phase 2, a detailed PRA will be performed for the dominant accident scenarios/operating states identified in Phase 1. The objectives, results and insights of Phase 1 are discussed in the paper

  17. Final report on the surface-based investigation phase (phase 1) at the Mizunami Underground Research Laboratory project

    International Nuclear Information System (INIS)

    Saegusa, Hiromitsu; Matsuoka, Toshiyuki

    2011-03-01

    The Mizunami Underground Research Laboratory (MIU) Project is a comprehensive research project investigating the deep underground environment within crystalline rock being conducted by Japan Atomic Energy Agency at Mizunami City in Gifu Prefecture, central Japan and its role is defined in 'Framework for Nuclear Energy Policy' by Japan Atomic Energy Commission. The MIU Project has three overlapping phases: Surface-based Investigation phase (Phase I), Construction phase (Phase II), and Operation phase (Phase III), with a total duration of 20 years. The overall project goals of the MIU Project from Phase I through to Phase III are: 1) to establish techniques for investigation, analysis and assessment of the deep geological environment, and 2) to develop a range of engineering for deep underground application. During Phase I, the overall project goals were supported by Phase I goals. For the overall project goals 1), the Phase I goals were set to construct models of the geological environment from all surface-based investigation results that describe the geological environment prior to excavation and predict excavation response. For the overall project goals 2), the Phase I goals were set to formulate detailed design concepts and a construction plan for the underground facilities. This report summarizes the Phase I investigation which was completed in March 2005. The authors believe this report will make an important milestone, since this report clarifies how the Phase I goals are achieved and evaluate the future issues thereby direct the research which will be conducted during Phase II. With regard to the overall project goals 1), 'To establish techniques for investigation, analysis and assessment of the deep geological environment,' a step-wise investigation was conducted by iterating investigation, interpretation, and assessment, thereby understanding of geologic environment was progressively and effectively improved with progress of investigation. An optimal

  18. Analysis and research status of severe core damage accidents

    International Nuclear Information System (INIS)

    1984-03-01

    The Severe Core Damage Research and Analysis Task Force was established in Nuclear Safety Research Center, Tokai Research Establishment, JAERI, in May, 1982 to make a quantitative analysis on the issues related with the severe core damage accident and also to survey the present status of the research and provide the required research subjects on the severe core damage accident. This report summarizes the results of the works performed by the Task Force during last one and half years. The main subjects investigated are as follows; (1) Discussion on the purposes and necessities of severe core damage accident research, (2) proposal of phenomenological research subjects required in Japan, (3) analysis of severe core damage accidents and identification of risk dominant accident sequences, (4) investigation of significant physical phenomena in severe core damage accidents, and (5) survey of the research status. (author)

  19. How to reduce the number of accidents

    CERN Multimedia

    2012-01-01

    Among the safety objectives that the Director-General has established for CERN in 2012 is a reduction in the number of workplace accidents.   The best way to prevent workplace accidents is to learn from experience. This is why any accident, fire, instance of pollution, or even a near-miss, should be reported using the EDH form that can be found here. All accident reports are followed up. The departments investigate all accidents that result in sick leave, as well as all the more common categories of accidents at CERN, essentially falls (slipping, falling on stairs, etc.), regardless of whether or not they lead to sick leave. By studying the accident causes that come to light in this way, it is possible to take preventive action to avoid such accidents in the future. If you have any questions, the HSE Unit will be happy to answer them. Contact us at safety-general@cern.ch. HSE Unit

  20. Preventing marine accidents caused by technology-induced human error

    OpenAIRE

    Bielić, Toni; Hasanspahić, Nermin; Čulin, Jelena

    2017-01-01

    The objective of embedding technology on board ships, to improve safety, is not fully accomplished. The paper studies marine accidents caused by human error resulting from improper human-technology interaction. The aim of the paper is to propose measures to prevent reoccurrence of such accidents. This study analyses the marine accident reports issued by Marine Accidents Investigation Branch covering the period from 2012 to 2014. The factors that caused these accidents are examined and categor...

  1. [Occupational accidents in an oil refinery in Brazil].

    Science.gov (United States)

    Souza, Carlos Augusto Vaz de; Freitas, Carlos Machado de

    2002-10-01

    Work in oil refineries involves the risk of minor to major accidents. National data show the impact of accidents on this industry. A study was carried out to describe accident profile and evaluate the adequacy of accident reporting system. Data on all accidents reported in an oil refinery in the state of Rio de Janeiro for the year 1997 were organized and analyzed. The study population consisted of 153 injury cases, 83 hired and 69 contracted workers. The variables were: type of accident, operation mode and position of the worker injured. Among hired workers, minor accidents predominated (54.2%) and they occurred during regular operation activities (62.9%). Among contracted workers, there also predominated minor accidents (75.5%) in a higher percentage, but they occurred mainly during maintenance activities (96.8%). The study results showed that there is a predominance of accidents in lower hierarchy workers, and these accidents occur mainly during maintenance activities. There is a need to improve the company's accident reporting system and accident investigation procedures.

  2. The analysis of pressurizer safety valve stuck open accident for low power and shutdown PSA

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Ho Gon; Park, Jin Hee; Jang, Seong Chul; Kim, Tae Woon

    2005-01-01

    The PSV (Pressurizer Safety Valve) popping test carried out practically in the early phase of a refueling outage has a little possibility of triggering a test-induced LOCA due to a PSV not fully closed or stuck open. According to a KSNP (Korea Standard Nuclear Power Plant) low power and shutdown PSA (Probabilistic Safety Assessment), the failure of a HPSI (High Pressure Safety Injection) following a PSV stuck open was identified as a dominant accident sequence with a significant contribution to low power and shutdown risks. In this study, we aim to investigate the consequences of the NPP for the various accident sequences following the PSV stuck open as an initiating event through the thermal-hydraulic system code calculations. Also, we search the accident mitigation method for the sequence of HPSI failure, then, the applicability of the method is verified by the simulations using T/H system code.

  3. Learning non-technical skill lessons from testimony given in the investigation of the nuclear accident at the Fukushima Nuclear Power Stations

    International Nuclear Information System (INIS)

    Hikono, Masaru; Sakuda, Hiroshi; Matsui, Yuko; Goto, Manabu; Kanayama, Masaki

    2016-01-01

    The Government Investigation Committee on the Accident at the Fukushima Nuclear Power Stations interviewed individuals concerned. The hearing records, published in 2014, are considered to have valuable lessons for power station managers who encounter severe accidents. In this study, descriptions from the hearing records were extracted as lessons for managers. The extractions were classified by the subject (for whom the lessons are intended), and the category of the non-technical skills. The results showed the possibility of pointing out the lessons in accordance with responsibilities. (author)

  4. On high-temperature reactor accident topology

    International Nuclear Information System (INIS)

    Fassbender, J.; Kroeger, W.; Wolters, J.

    1981-01-01

    American and German risk studies for an HTGR and independent investigations of hypothetical accident sequences led to a fundamental understanding of the topology of HTGR accident sequences. The dominating importance of core heat-up accidents was confirmed and the initiating events were identified. Complications of core heat-up accidents by air or water ingress are of minor importance for the risk, whereas the long-term development of accidents during days and weeks plays an important role for the environmental impact. The risk caused by an HTGR at a German site cannot yet be determined exactly, because no modern German HTGR design has passed a licensing procedure. Cautious estimates show that risk will appear to be substantially smaller than the LWR risk. The main reasons are the considerably reduced release of fission procucts and the slow development of core heat-up accidents leaving much time for measures which reduce the risk. (orig.) [de

  5. Safety climate and accidents at work

    DEFF Research Database (Denmark)

    Ajslev, Jeppe; Dastjerdi, Efat Lali; Dyreborg, Johnny

    2017-01-01

    Aim: Occupational safety climate is utilized as a way to measure the risk of accidents and injuries at work. This study investigates which factors are associated with safety climate and accidents at work. Methods: In the 2012 round of the Danish Work Environment and Health Study, 15,144 workers...... from the general working population of Denmark replied to questions about safety climate and accidents at work. Mutually adjusted logistic regression analyses determined the association between variables. Results: Within the last year, 5.7% had experienced an accident resulting in sickness absence....... The number of safety climate problems was progressively associated with the odds ratio (OR) for accidents. For one safety climate problem the OR for accidents was 2.01 (95% CI 1.67–2.42), for four or more safety climate problems the OR was 4.57 (95% CI 3.64–5.74). Young workers (18–24 years) had higher odds...

  6. 49 CFR 225.19 - Primary groups of accidents/incidents.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Primary groups of accidents/incidents. 225.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD ACCIDENTS/INCIDENTS: REPORTS CLASSIFICATION, AND INVESTIGATIONS § 225.19 Primary groups of accidents/incidents. (a) For reporting purposes reportable railroad...

  7. An investigation of subchannel analysis models for single-phase and two-phase flow

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Dae Hyun

    1996-01-01

    The governing equations and lateral transport modelings of subchannel analysis code, which is the most widely used tool for the analysis of thermal hydraulics fields in reactor cores, have been thoroughly investigated in this study. The procedure for the derivation of subchannel integral balance equations from the local instantaneous phase equations was investigated by stages. The characteristics of governing equations according to the treatment of phase velocity were studies, and the equations based on the drift-flux equilibrium formulation have been derived. Turbulent mixing and void drift modeling, which affect considerably to the accuracy of subchannel analysis code, have been reviewed. In addition, some representative modelings of single-phase and two-phase turbulent mixing models have been introduced. (author). 5 tabs., 4 figs., 16 refs.

  8. Investigation of a hydrogen mitigation system during large break loss-of-coolant accident for a two-loop pressurized water reactor

    Energy Technology Data Exchange (ETDEWEB)

    Dehjourian, Mehdi; Rahgoshay, Mohmmad; Jahanfamia, Gholamreza [Dept. of Nuclear Engineering, Science and Research Branch, Islamic Azad University of Tehran, Tehran (Iran, Islamic Republic of); Sayareh, Reza [Faculty of Electrical and Computer Engineering, Kerman Graduate University of Technology, Kerman (Iran, Islamic Republic of); Shirani, Amir Saied [Faculty of Engineering, Shahid Beheshti University, Tehran (Iran, Islamic Republic of)

    2016-10-15

    Hydrogen release during severe accidents poses a serious threat to containment integrity. Mitigating procedures are necessary to prevent global or local explosions, especially in large steel shell containments. The management of hydrogen safety and prevention of over-pressurization could be implemented through a hydrogen reduction system and spray system. During the course of the hypothetical large break loss-of-coolant accident in a nuclear power plant, hydrogen is generated by a reaction between steam and the fuel-cladding inside the reactor pressure vessel and also core concrete interaction after ejection of melt into the cavity. The MELCOR 1.8.6 was used to assess core degradation and containment behavior during the large break loss-of-coolant accident without the actuation of the safety injection system except for accumulators in Beznau nuclear power plant. Also, hydrogen distribution in containment and performance of hydrogen reduction system were investigated.

  9. Assessment of CRBR core disruptive accident energetics

    International Nuclear Information System (INIS)

    Theofanous, T.G.; Bell, C.R.

    1984-03-01

    The results of an independent assessment of core disruptive accident energetics for the Clinch River Breeder Reactor are presented in this document. This assessment was performed for the Nuclear Regulatory Commission under the direction of the CRBR Program Office within the Office of Nuclear Reactor Regulation. It considered in detail the accident behavior for three accident initiators that are representative of three different classes of events; unprotected loss of flow, unprotected reactivity insertion, and protected loss of heat sink. The primary system's energetics accommodation capability was realistically, yet conservatively, determined in terms of core events. This accommodation capability was found to be equivalent to an isentropic work potential for expansion to one atmosphere of 2550 MJ or a ramp rate of about 200 $/s applied to a classical two-phase disassembly

  10. JAERI's activities in JCO accident

    International Nuclear Information System (INIS)

    2000-09-01

    The Japan Atomic Energy Research Institute (JAERI) was actively involved in a variety of technical supports and cooperative activities, such as advice on terminating the criticality condition, contamination checks of the residents and consultation services for the residents, as emergency response actions to the criticality accident at the uranium processing facility operated by the JCO Co. Ltd., which occurred on September 30, 1999. These activities were carried out in collaborative ways by the JAERI staff from the Tokai Research Establishment, Naka Fusion Research Establishment, Oarai Research Establishment, and Headquarter Office in Tokyo. As well, the JAERI was engaged in the post-accident activities such as identification of accident causes, analyses of the criticality accident, and dose assessment of exposed residents, to support the Headquarter for Accident Countermeasures of the Science and Technology Agency (STA), the Accident Investigation Committee and the Health Control Committee of the Nuclear Safety Commission of Japan (NSC). This report compiles the activities, that the JAERI has conducted to date, including the discussions on measures for terminating the criticality condition, evaluation of the fission number, radiation monitoring in the environment, dose assessment, analyses of criticality dynamics. (author)

  11. Accident management

    International Nuclear Information System (INIS)

    Lutz, R.J.; Monty, B.S.; Liparulo, N.J.; Desaedeleer, G.

    1989-01-01

    The foundation of the framework for a Severe Accident Management Program is the contained in the Probabilistic Safety Study (PSS) or the Individual Plant Evaluations (IPE) for a specific plant. The development of a Severe Accident Management Program at a plant is based on the use of the information, in conjunction with other applicable information. A Severe Accident Management Program must address both accident prevention and accident mitigation. The overall Severe Accident Management framework must address these two facets, as a living program in terms of gathering the evaluating information, the readiness to respond to an event. Significant international experience in the development of severe accident management programs exist which should provide some direction for the development of Severe Accident Management in the U.S. This paper reports that the two most important elements of a Severe Accident Management Program are the Emergency Consultation process and the standards for measuring the effectiveness of individual Severe Accident Management Programs at utilities

  12. Lockout/tagout accident investigation.

    Science.gov (United States)

    White, James R

    2014-08-01

    When I was in boot camp, our drill instructor told us that assume makes an ass out of u and me. It was true then, and it is true today. In this instance, assumptions came into play several times, both by the worker and by the companies involved. The good news is that it did not result in a fatality, but that does not relieve the pain and suffering that the employee had to endure. This same type of scenario is likely repeated at many job sites throughout the United States. Multiple contractors, dozens--maybe hundreds--of workers, power system equipment and devices; all of these have to be taken into consideration when performing maintenance activities. It can become a blur. People are people, and people make mistakes. That is why we have OSHA regulations, NFPA 70E, company procedures, policies, etc. Most if not all of us have either been involved in accidents or know people who have been. It's not like it's a secret that people make mistakes, but talk to some and they seem to think only others have that failing. Safety is not about just any one procedure or rule. It's about slowing down, making a plan, and executing that plan. There are plenty of tools available to help us: policies, procedures, codes, standards, federal regulations, and state and local laws. I am not about to say that the worker involved in this incident was not taking safety seriously, but he failed to follow some fundamental safety rules like test-before-touch. If he had taken just that one step, there would be nothing to write about.

  13. Containment severe accident thermohydraulic phenomena

    International Nuclear Information System (INIS)

    Frid, W.

    1991-08-01

    This report describes and discusses the containment accident progression and the important severe accident containment thermohydraulic phenomena. The overall objective of the report is to provide a rather detailed presentation of the present status of phenomenological knowledge, including an account of relevant experimental investigations and to discuss, to some extent, the modelling approach used in the MAAP 3.0 computer code. The MAAP code has been used in Sweden as the main tool in the analysis of severe accidents. The dependence of the containment accident progression and containment phenomena on the initial conditions, which in turn are heavily dependent on the in-vessel accident progression and phenomena as well as associated uncertainties, is emphasized. The report is in three parts dealing with: * Swedish reactor containments, the severe accident mitigation programme in Sweden and containment accident progression in Swedish PWRs and BWRs as predicted by the MAAP 3.0 code. * Key non-energetic ex-vessel phenomena (melt fragmentation in water, melt quenching and coolability, core-concrete interaction and high temperature in containment). * Early containment threats due to energetic events (hydrogen combustion, high pressure melt ejection and direct containment heating, and ex-vessel steam explosions). The report concludes that our understanding of the containment severe accident progression and phenomena has improved very significantly over the parts ten years and, thereby, our ability to assess containment threats, to quantify uncertainties, and to interpret the results of experiments and computer code calculations have also increased. (au)

  14. On preparation for accident management in LWR power stations

    International Nuclear Information System (INIS)

    1996-01-01

    Nuclear Safety Commission received the report from Reactor Safety General Examination Committee which investigated the policy of executing the preparation for accident management. The basic policy on the preparation for accident management was decided by Nuclear Safety Commission in May, 1992. This Examination Committee investigated the policy of executing the preparation for accident management, which had been reported from the administrative office, and as the result, it judged the policy as adequate, therefore, the report is made. The course to the foundation of subcommittee is reported. The basic policy of the examination on accident management by the subcommittee conforming to the decision by Nuclear Safety Commission, the measures of accident management which were extracted for BWR and PWR facilities, the examination of the technical adequacy of selecting accident sequences in BWR and PWR facilities and the countermeasures to them, the adequacy of the evaluation of the possibility of executing accident management measures and their effectiveness and the adequacy of the evaluation of effect to existing safety functions, the preparation of operation procedure manual, and education and training plan are reported. (K.I.)

  15. Accident of Large-scale Wind Turbines Disconnecting from Power Grid and Its Protection

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    There were many accidents of large-scale wind turbines disconnecting from power grid in 2011. As single- phase-to-ground fault cannot be correctly detected, single-phase-to-ground fault evolved to phase-to-phase fault. Phase-to-phase fault was isolated slowly, thus leading to low voltage. And wind turbines without enough low voltage ride-through capacity had to be disconnected from the grid. After some wind turbines being disconnected from the grid, overvoltage caused by reactive power surplus made more wind turbines disconnect from the grid. Based on the accident analysis, this paper presents solutions to above problems, including travelling waves based single-phase-to-ground protection, adaptive low voltage protection, integrated protection and control, and high impedance fault detection. The solutions lay foundations in theory and technology to prevent large-scale wind turbines disconnecting from the operating power grid.

  16. Accident history, risk perception and traffic safe behaviour.

    Science.gov (United States)

    Ngueutsa, Robert; Kouabenan, Dongo Rémi

    2017-09-01

    This study clarifies the associations between accident history, perception of the riskiness of road travel and traffic safety behaviours by taking into account the number and severity of accidents experienced. A sample of 525 road users in Cameroon answered a questionnaire comprising items on perception of risk, safe behaviour and personal accident history. Participants who reported involvement in more than three accidents or involvement in a severe accident perceived road travel as less risky and also reported behaving less safely compared with those involved in fewer, or less severe accidents. The results have practical implications for the prevention of traffic accidents. Practitioner Summary: The associations between accident history, perceived risk of road travel and safe behaviour were investigated using self-report questionnaire data. Participants involved in more than three accidents, or in severe accidents, perceived road travel as less risky and also reported more unsafe behaviour compared with those involved in fewer, or less severe accidents. Campaigns targeting people with a less serious, less extensive accident history should aim to increase awareness of hazards and the potential severity of their consequences, as well as emphasising how easy it is to take the recommended preventive actions. Campaigns targeting those involved in more frequent accidents, and survivors of serious accidents, should address feelings of invulnerability and helplessness.

  17. Primary school accident reporting in one education authority.

    Science.gov (United States)

    Latif, A H A; Williams, W R; Sibert, J

    2002-02-01

    Studies have shown a correlation between increased accident rates and levels of deprivation in the community. School accident reporting is one area where an association might be expected. To investigate differences in primary school accident rates in deprived and more affluent wards, in an area managed by one education authority. Statistical analysis of accident form returns for 100 primary schools in one education authority in Wales over a two year period, in conjunction with visits to over one third of school sites. Accident report rates from schools in deprived wards were three times higher than those from schools in more affluent wards. School visits showed that this discrepancy was attributable primarily to differences in reporting procedures. One third of schools did not report accidents and approximately half did not keep records of minor accidents. The association between school accident report rates and deprivation in the community is complex. School accident data from local education authorities may be unreliable for most purposes of collection.

  18. On the results of investigating cause of sodium leak accident in prototype fast breeder reactor 'Monju' in Power Reactor and Nuclear Fuel Development Corporation

    International Nuclear Information System (INIS)

    1997-01-01

    The sodium leak accident in the secondary system of Monju occurred on December 8, 1995. The task force for investigating the accident was established in Nuclear Safety Bureau, and on May 23, 1996, the May report on the results of investigation was published. In order to elucidate the details of the fact that only one thermometer in the secondary system was broken and the reaction of leaked sodium with steel materials, the investigation was continued. In this report, also the results of these additional investigations are included. First, the accident of this time is outlined. As for the cause of the occurrence of sodium leak, the examination of the fracture surface of the broken thermometer, the high cycle fatigue due to hydrodynamic vibration, the investigation of the design, manufacture and installation of the thermometer, and the evaluation of secondary system thermometers which were not broken are reported. The cause that only one thermometer was broken was the way of its insertion which made the restraint of vibration amplitude ineffective. As the effects of sodium leak, the pile of sodium compound on floor liner, the damage of ducts and gratings, and the color change of concrete walls were observed. The burning experiment due to sodium leak was carried out to confirm the effects. (K.I.)

  19. The handling of radiation accidents

    International Nuclear Information System (INIS)

    1977-01-01

    The symposium was attended by 204 participants from 39 countries and 5 international organizations. Forty-two papers were presented in 8 sessions. The purpose of the meeting was to foster an exchange of experiences gained in establishing and exercising plans for mitigating the effects of radiation accidents and in the handling of actual accident situations. Only a small number of accidents were reported at the symposium, and this reflects the very high standards of safety that has been achieved by the nuclear industry. No accidents of radiological significance were reported to have occurred at commercial nuclear power plants. Of the accidents reported, industrial radiography continues to be the area in which most of the radiation accidents occur. The experience gained in the reported accident situations served to confirm the crucial importance of the prompt availability of medical and radiological services, particularly in the case of uptake of radioactive material, and emphasized the importance of detailed investigation into the causes of the accident in order to improve preventative measures. One of the principal themes of the symposium involved emergency procedures related to nuclear power plant accidents, and several papers defining the scope, progression and consequences of design base accidents for both thermal and fast reactor systems were presented. These were complemented by papers defining the resultant protection requirements that should be satisfied in the establishment of plans designed to mitigate the effects of the postulated accident situations. Several papers were presented describing existing emergency organizational arrangements relating both to specific nuclear power plants and to comprehensive national schemes, and a particularly informative session was devoted to the topic of training of personnel in the practical conduct of emergency arrangements. The general feeling of the participants was one of studied confidence in the competence and

  20. Psychological aspects of accident prevention in mines

    Energy Technology Data Exchange (ETDEWEB)

    Lukestikova, M

    1981-04-01

    This paper duscusses ways of preventing work accidents and increasing work safety in underground black coal mines. Specific conditions of underground operations in coal mines are stressed. Elements of work accident prevention are analyzed: reducing hazards by introducing safer technology, automation and mechanization of operations associated with hazards, introducing special measures within the framework of safety engineering. Dependence of accident rate on such factors as personnel training, age, motivation, qualifications, and labor discipline is discussed. Investigations indicate that miner motivation plays a significant role in accident prevention. A high degree of labor motivation successfully reduces accident rate and a low degree of motivation increases accident rate. Role of labor collective in labor motivation as well as a correct system of wage incentives are evaluated. Methods of personnel training aimed at reducing accident rate are described. Role of a technique by which a group of miners attempts to find a solution to a work safety problem by amassing all ideas spontaneously contributed by participants is stressed.

  1. Investigation of the different scenarios occurring in a PWR in case of a TMLB accident

    International Nuclear Information System (INIS)

    Pochard, R.; Dufresne, J.; Autrusson, B.

    1988-10-01

    Severe accidents in light water reactors fall into one of two main categories, depending on whether or not core meltdown is accompanied by a pressure buildup in the primary system. The way in which the accident develops is, in fact, largely conditioned by this pressure aspect: temperature distribution in the core and primary system resulting from natural convection gas streams; fuel clad failure mode, etc... One major effect of pressure buildup on the accident scenario is primary system failure under the combined actions of pressure and temperature. The purpose of the present paper is to present, after a detailed thermalhydraulic study, an analysis of the timing and location of the system failures in case of a TMLB accident on CPY french type reactor

  2. Risk-based Analysis of Construction Accidents in Iran During 2007-2011-Meta Analyze Study

    Science.gov (United States)

    AMIRI, Mehran; ARDESHIR, Abdollah; FAZEL ZARANDI, Mohammad Hossein

    2014-01-01

    Abstract Background The present study aimed to investigate the characteristics of occupational accidents and frequency and severity of work related accidents in the construction industry among Iranian insured workers during the years 20072011. Methods The Iranian Social Security Organization (ISSO) accident database containing 21,864 cases between the years 2007-2011 was applied in this study. In the next step, Total Accident Rate (TRA), Total Severity Index (TSI), and Risk Factor (RF) were defined. The core of this work is devoted to analyzing the data from different perspectives such as age of workers, occupation and construction phase, day of the week, time of the day, seasonal analysis, regional considerations, type of accident, and body parts affected. Results Workers between 15-19 years old (TAR=13.4%) are almost six times more exposed to risk of accident than the average of all ages (TAR=2.51%). Laborers and structural workers (TAR=66.6%) and those working at heights (TAR=47.2%) experience more accidents than other groups of workers. Moreover, older workers over 65 years old (TSI=1.97%> average TSI=1.60%), work supervisors (TSI=12.20% >average TSI=9.09%), and night shift workers (TSI=1.89% >average TSI=1.47%) are more prone to severe accidents. Conclusion It is recommended that laborers, young workers, weekend and night shift workers be supervised more carefully in the workplace. Use of Personal Protective Equipment (PPE) should be compulsory in working environments, and special attention should be undertaken to people working outdoors and at heights. It is also suggested that policymakers pay more attention to the improvement of safety conditions in deprived and cold western regions. PMID:26005662

  3. Risk-based Analysis of Construction Accidents in Iran During 2007-2011-Meta Analyze Study.

    Science.gov (United States)

    Amiri, Mehran; Ardeshir, Abdollah; Fazel Zarandi, Mohammad Hossein

    2014-04-01

    The present study aimed to investigate the characteristics of occupational accidents and frequency and severity of work related accidents in the construction industry among Iranian insured workers during the years 20072011. The Iranian Social Security Organization (ISSO) accident database containing 21,864 cases between the years 2007-2011 was applied in this study. In the next step, Total Accident Rate (TRA), Total Severity Index (TSI), and Risk Factor (RF) were defined. The core of this work is devoted to analyzing the data from different perspectives such as age of workers, occupation and construction phase, day of the week, time of the day, seasonal analysis, regional considerations, type of accident, and body parts affected. Workers between 15-19 years old (TAR=13.4%) are almost six times more exposed to risk of accident than the average of all ages (TAR=2.51%). Laborers and structural workers (TAR=66.6%) and those working at heights (TAR=47.2%) experience more accidents than other groups of workers. Moreover, older workers over 65 years old (TSI=1.97%> average TSI=1.60%), work supervisors (TSI=12.20% >average TSI=9.09%), and night shift workers (TSI=1.89% >average TSI=1.47%) are more prone to severe accidents. It is recommended that laborers, young workers, weekend and night shift workers be supervised more carefully in the workplace. Use of Personal Protective Equipment (PPE) should be compulsory in working environments, and special attention should be undertaken to people working outdoors and at heights. It is also suggested that policymakers pay more attention to the improvement of safety conditions in deprived and cold western regions.

  4. Radiological accident 'The Citadel' medical aspects

    International Nuclear Information System (INIS)

    Cardenas Herrera, Juan; Fernandez, Isis M.; Lopez, Gladys; Garcia, Omar; Lamadrid, Ana I.; Ramos, Enma O.; Villa, Rosario; Giron, Carmen M.; Escobar, Myrian; Zerpa, Miguel; Romero, Argenis H.; Medina, Julio; Laurenti, Zenia; Oliva, Maria T.; Sierra, Nitza; Lorenzo, Alexis

    2008-01-01

    The work exposes the medical actions carried out in the mitigation of the consequences of the accident and its main results. In a facility of storage of radioactive waste in Caracas, Venezuela, it was happened a radiological accident. This event caused radioactive contamination of the environment, as well as the irradiation and radioactive contamination of at least 10 people involved in the fact, in its majority children. Cuban institutions participated in response to the accident. Among the decisions adopted by the team of combined work Cuban-Venezuelan, we find the one of transferring affected people to Cuba, for their dosimetric and medical evaluation. Being designed a work strategy to develop the investigations to people affected by the radiological accident, in correspondence with the circumstances, magnitude and consequences of the accident. The obtained main results are: 100% presented affectations in its health, not associate directly to the accident, although the accident influenced in its psychological state. In 3 of studied people they were detected radioactive contamination with Cesium -137 with dose among 2.01 X 10-4 Sv up to 2.78 X 10-4 Sv. This accident demonstrated the necessity to have technical capacities to face these events and the importance of the international solidarity. (author)

  5. Experimental Investigation of Operation of VVER Steam Generator in Condensation Mode in the Event of the Severe Accident

    Energy Technology Data Exchange (ETDEWEB)

    Morozov, Andrey [Institute for Physics and Power Engineering by A.I. Leypunsky, 1 Bondarenko sq. Obninsk, 249033 (Russian Federation)

    2008-07-01

    For new Russian nuclear power plants with VVER-1200 reactor in the event of a beyond design basis accident, provision is made for the use of passive safety systems for necessary core cooling. These safety systems include the passive heat removal system (PHRS). In the case of leakage in the primary circuit this system assures the transition of steam generators (SG) to operation in the mode of condensation of the primary circuit steam. As a result, the condensate from SG arrives at the core providing its additional cooling. To investigate the condensation mode of VVER SG operation, a large scale HA2M-SG test facility was constructed. The rig incorporates: buffer tank, SG model with scale is 1:46, PHRS heat exchanger. Experiments at the test facility have been performed to investigate condensation mode of operation of SG model at the pressure 0.4 MPa, correspond to VVER reactor pressure at the last stage of the beyond design basis accident. The report presents the test procedure and the basic obtained test results. (authors)

  6. CARDfile data base representativeness, Phase 1 : general characteristics including populations, vehicles, roads, and fatal accidents

    Science.gov (United States)

    1988-08-01

    This report details the results of an analysis performed to evaluate the : representativeness of the Crash Avoidance Research accident data base : (CARDfile). The accident records for 1983 and 1984 from six states (Indiana, : Maryland, Michigan, Penn...

  7. CARDfile Data Base Representatives - Phase I: General Characteristics including Populations, Vehicles, Roads, and Fatal Accidents

    Science.gov (United States)

    1985-12-01

    This report details the results of an analysis performed to evaluate the representativeness of the Crash Avoidance Research accident data base (CARDfile). The accident records for 1983 and 1984 from six states (Indiana, Maryland, Michigan, Pennsylvan...

  8. The radiological accident in Cochabamba

    International Nuclear Information System (INIS)

    2004-07-01

    In April 2002 an accident involving an industrial radiography source containing 192 Ir occurred in Cochabamba, Bolivia, some 400 km from the capital, La Paz. A faulty radiography source container had been sent back to the headquarters of the company concerned in La Paz together with other equipment as cargo on a passenger bus. This gave rise to a potential for serious exposure for the bus passengers as well as for the company employees who were using and transporting the source. The Government of Bolivia requested the assistance of the IAEA under the terms of the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency. The IAEA in response assembled and sent to Bolivia a team composed of senior radiation safety experts and radiation pathology experts from Brazil, the United Kingdom and the IAEA to investigate the accident. The IAEA is grateful to the Government of Bolivia for the opportunity to report on this accident in order to disseminate the valuable lessons learned and help prevent similar accidents in the future

  9. Molten corium concrete interaction: investigation of heat transfer in two-phase flow

    International Nuclear Information System (INIS)

    Amizic, Milan

    2014-01-01

    In the context of severe accident research for the second and the third generation of nuclear power plants, there are still open issues concerning some aspects of the concrete cavity ablation during the molten corium - concrete interaction (MCCI). The determination of heat transfer along the interfacial region between the molten corium pool and the ablating basemat concrete is crucial for the assessment of concrete ablation progression and eventually the basemat melt through. For the purpose of experimental investigation of thermal hydraulics inside a liquid pool agitated by gas bubbles, the CLARA project has been launched. The CLARA experiments are performed using simulant materials and they reveal the influence of superficial gas velocity, liquid viscosity and pool geometry on the heat transfer coefficient between the internally heated liquid pool and vertical and horizontal pool walls maintained at uniform temperature. The first test campaign has been conducted with the small pool configuration (50 cm * 25 cm * 25 cm). The tests have been performed with liquids covering a wide range of dynamic viscosity from approximately 1 mPa s to 10000 mPa s and the superficial gas velocity is varied up to 8 cm/s. This thesis comprises a brief description of MCCI phenomenology, literature reviews on the existing heat transfer correlations for two phase flow and the void fraction, a description of CLARA setup, experimental results and their interpretation. The experimental results are compared with existing models and some new models for the assessment of heat transfer coefficient in two-phase flow. (author) [fr

  10. Secondary school accident reporting in one education authority.

    Science.gov (United States)

    Williams, W R; Latif, A H A; Sibert, J

    2002-01-01

    Secondary schools appear to have very different accident rates when they are compared on the basis of accident report returns. The variation may be as a result of real differences in accident rates or different reporting procedures. This study investigates accident reporting from secondary schools and, in particular, the role of the school nurse. Accident form returns covering a 2-year period were collected for statistical analysis from 13 comprehensive schools in one local education authority in Wales. School sites were visited in the following school year to obtain information about accident records held on site and accident reporting procedures. The main factors determining the number of school accident reports submitted to the education authority relate to differences in recording and reporting procedures, such as the employment of a nurse and the policy of the head teacher/safety officer on submitting accident returns. Accident and emergency department referrals from similar schools may show significant differences in specific injuries and their causes. The level of school accident activity cannot be gauged from reports submitted to the education authority. Lack of incentives for collecting good accident data, in conjunction with the degree of complacency in the current system, suggest that future accident rates and reporting activity are unlikely to change.

  11. Statistical modelling of the frequency and severity of road accidents

    DEFF Research Database (Denmark)

    Janstrup, Kira Hyldekær

    -reporting. The problem of under-reporting is not unique for traffic accidents as severe under-reporting is a challenge in many other fields of incident reporting. In other incidents fields with intended or unintended harm, research has investigated the behavioural reasons for why people choose to report an incident......Under-reporting of traffic accidents is a well-discussed subject in traffic safety and it is well-known that the degree of under-reporting of traffic accidents is quite high in many countries. Nevertheless, very little literature has been made to investigate what causes the high degree of under...... on the service quality within the police none have looked at the service quality specific for the handling of traffic accidents.The objective of this Ph.D. thesis is to investigate the extent of under-reporting of traffic accidents in Denmark and trace the under-reporting systematically. As something new...

  12. Traffic Accidents Involving Cyclists Identifying Causal Factors Using Questionnaire Survey, Traffic Accident Data, and Real-World Observation.

    Science.gov (United States)

    Oikawa, Shoko; Hirose, Toshiya; Aomura, Shigeru; Matsui, Yasuhiro

    2016-11-01

    The purpose of this study is to clarify the mechanism of traffic accidents involving cyclists. The focus is on the characteristics of cyclist accidents and scenarios, because the number of traffic accidents involving cyclists in Tokyo is the highest in Japan. First, dangerous situations in traffic incidents were investigated by collecting data from 304 cyclists in one city in Tokyo using a questionnaire survey. The survey indicated that cyclists used their bicycles generally while commuting to work or school in the morning. Second, the study investigated the characteristics of 250 accident situations involving cyclists that happened in the city using real-world bicycle accident data. The results revealed that the traffic accidents occurred at intersections of local streets, where cyclists collided most often with vehicles during commute time in the morning. Third, cyclists' behavior was observed at a local street intersection in the morning in the city using video pictures. In one hour during the morning commute period, 250 bicycles passed through the intersection. The results indicated that one of the reasons for traffic accidents involving cyclists might be the combined effect of low visibility, caused by the presence of box-like building structures close to the intersections, and the cyclists' behavior in terms of their velocity and no confirming safety. It was observed that, on average, bicycle velocity was 3.1 m/s at the initial line of an intersection. The findings from this study could be useful in developing new technologies to improve cyclist safety, such as alert devices for cyclists and vehicle drivers, wireless communication systems between cyclists and vehicle drivers, or advanced vehicles with bicycle detection and collision mitigation systems.

  13. Traffic dynamics around weaving section influenced by accident: Cellular automata approach

    Science.gov (United States)

    Kong, Lin-Peng; Li, Xin-Gang; Lam, William H. K.

    2015-07-01

    The weaving section, as a typical bottleneck, is one source of vehicle conflicts and an accident-prone area. Traffic accident will block lanes and the road capacity will be reduced. Several models have been established to study the dynamics around traffic bottlenecks. However, little attention has been paid to study the complex traffic dynamics influenced by the combined effects of bottleneck and accident. This paper presents a cellular automaton model to characterize accident-induced traffic behavior around the weaving section. Some effective control measures are proposed and verified for traffic management under accident condition. The total flux as a function of inflow rates, the phase diagrams, the spatial-temporal diagrams, and the density and velocity profiles are presented to analyze the impact of accident. It was shown that the proposed control measures for weaving traffic can improve the capacity of weaving section under both normal and accident conditions; the accidents occurring on median lane in the weaving section are more inclined to cause traffic jam and reduce road capacity; the capacity of weaving section will be greatly reduced when the accident happens downstream the weaving section.

  14. Analysis of Three Mile Island - Unit 2 accident

    International Nuclear Information System (INIS)

    1979-07-01

    The Nuclear Safety Analysis Center (NSAC) of the Electric Power Research Institute is analyzing the Three Mile Island-2 accident. An early result of this analysis was a brief narrative summary, issued in mid May 1979. The present report contains a revised version of that narrative summary, a highly detailed sequence of events, a standard reference list, a list of abbreviations and acronyms, and several appendices. The appendices serve either to describe plant features which are pertinent to the understanding of the sequence of events, or indicate how certain inferences and conclusions in the report were reached. Supplementing the appendices contained herein, additional appendices are in preparation; these will be issued when available (e.g., the appendices Hydrogen Phenomena and Operator Actions during Initial Transient will follow later). Also in preparation is a matrix of equipment and systems actions during the accident. This report together with future supplements and a separate Core Damage Assessment report, will embody the principal results of that phase of NSAC work which is devoted to learning and understanding what happened during the accident. Subsequent phases will concentrate on causes, lessons learned and generic remedial or preventive measures which may be appropriate

  15. Analysis of Three Mile Island-Unit 2 accident

    International Nuclear Information System (INIS)

    1979-07-01

    The Nuclear Safety Analysis Center (NSAC) of the Electic Power Research Institute is analyzing the Three Mile Island-2 accident. An early result of this analysis was a brief narrative summary, issued in mid-May 1979. The present report contains a revised version of that narrative summary, a highly detailed sequence of events, a standard reference list, a list of abbreviations and acronyms, and several appendices. The appendices serve either to describe plant features which are pertinent to the understanding of the sequence of events, or indicate how certain inferences and conclusions in the report were reached. Supplementing the appendices contained herein, additional appendices are in preparation; these will be issued when available (e.g., the appendices Hydrogen Phenomena and Operator Actions duing Initial Transient will follow later). Also in preparation is a matrix of equipment and systems actions during the accident. This report together with future supplements and a separate Core Damage Assessment report, will embody the principal results of that phase of NSAC's work which is devoted to learning and understanding what happened during the accident. Subsequent phases will concentrate on causes, lessons learned and generic remedial or preventive measures which may be appropriate

  16. Nuclear accidents and policy. Notes on public perception

    Energy Technology Data Exchange (ETDEWEB)

    Richter, Felix; Steenbeck, Malte; Wilhelm, Markus [Hamburg Univ. (Germany). Lehrstuhl fuer Wirtschaftspolitik

    2013-07-01

    Major nuclear accidents as recently in Fukushima set nuclear power plant security at the top of the public agenda. Using data of the German Socio-Economic Panel we analyze the effects of the Fukushima accident and a subsequent government decision on nuclear power phase-out on several measures of subjective perception in Germany. In the light of current political debates about the strategic orientation of this energy turnaround, such an analysis is of particular interest since non-pecuniary gains in measures of subjective perception might provide further aspects to be taken into consideration when evaluating the economic costs of the policy. We find that the Fukushima accident increases the probability to report greater worries about the environment. Furthermore, we find evidence for a decrease in the probability to be very worried about the security of nuclear power plants as well as for an increase in reported levels of subjective well-being following the government's resolution on nuclear phase-out. Finally we find that the probabilities of reporting very high concerns are related to the distance between the respondents' place of residence and the nearest nuclear power station.

  17. Nuclear accidents and policy. Notes on public perception

    Energy Technology Data Exchange (ETDEWEB)

    Richter, Felix; Steenbeck, Malte; Wilhelm, Markus [Hamburg Univ. (Germany). Lehrstuhl fuer Wirtschaftspolitik

    2013-07-01

    Major nuclear accidents as recently in Fukushima set nuclear power plant security at the top of the public agenda. Using data of the German Socio-Economic Panel we analyze the effects of the Fukushima accident and a subsequent government decision on nuclear power phase-out on several measures of subjective perception in Germany. In the light of current political debates about the strategic orientation of this energy turnaround, such an analysis is of particular interest since non-pecuniary gains in measures of subjective perception might provide further aspects to be taken into consideration when evaluating the economic costs of the policy. We find that the Fukushima accident increases the probability to report greater worries about the environment. Furthermore, we find evidence for a decrease in the probability to be very worried about the security of nuclear power plants as well as for an increase in reported levels of subjective well-being following the government's resolution on nuclear phase-out. Finally we find that the probabilities of reporting very high concerns are related to the distance between the respondents' place of residence and the nearest nuclear power station.

  18. Analysis on relation between safety input and accidents

    Institute of Scientific and Technical Information of China (English)

    YAO Qing-guo; ZHANG Xue-mu; LI Chun-hui

    2007-01-01

    The number of safety input directly determines the level of safety, and there exists dialectical and unified relations between safety input and accidents. Based on the field investigation and reliable data, this paper deeply studied the dialectical relationship between safety input and accidents, and acquired the conclusions. The security situation of the coal enterprises was related to the security input rate, being effected little by the security input scale, and build the relationship model between safety input and accidents on this basis, that is the accident model.

  19. Serum homocysteine levels in cerebrovascular accidents.

    Science.gov (United States)

    Zongte, Zolianthanga; Shaini, L; Debbarma, Asis; Singh, Th Bhimo; Devi, S Bilasini; Singh, W Gyaneshwar

    2008-04-01

    Hyperhomocysteinemia has been considered an independent risk factor in the development of stroke. The present study was undertaken to evaluate serum homocysteine levels in patients with cerebrovascular accidents among the Manipuri population and to compare with the normal cases. Ninety-three cerebrovascular accident cases admitted in the hospital were enrolled for the study and twenty-seven age and sex matched individuals free from cerebrovascular diseases were taken as control group. Serum homocysteine levels were estimated by ELISA method using Axis homocysteine EIA kit manufactured by Ranbaxy Diagnostic Ltd. India. The finding suggests that hyperhomocysteinemia is associated with cerebrovascular accident with male preponderance, which increases with advancing age. However, whether hyperhomocysteinemia is the cause or the result of cerebrovascular accidents needs further investigations.

  20. Material Selection for Accident Tolerant Fuel Cladding

    International Nuclear Information System (INIS)

    Pint, Bruce A.; Terrani, Kurt A.; Yamamoto, Yukinori; Snead, Lance Lewis

    2015-01-01

    Alternative cladding materials to Zr-based alloys are being investigated for accident tolerance, which can be defined as > 100X improvement (compared to Zr-based alloys) in oxidation resistance to steam or steam-H 2 environments at ≥1473 K (1200°C) for short times. After reviewing a wide range of candidates, current steam oxidation testing is being conducted on Mo, MAX phases and FeCrAl alloys. Recently reported low mass losses for Mo in steam at 800°C could not be reproduced. Both FeCrAl and MAX phase Ti 2 AlC form a protective alumina scale in steam. However, commercial Ti 2 AlC that was not single phase, formed a much thicker oxide at 1200°C in steam and significant TiO 2 , and therefore Ti 2 AlC may be challenging to form as a cladding or a coating. Alloy development for FeCrAl is seeking to maintain its steam oxidation resistance to 1475°C, while reducing its Cr content to minimize susceptibility to irradiation-assisted α' formation. The composition effects and critical limits to retaining protective scale formation at > 1400°C are still being evaluated.

  1. Analysis on the nitrogen drilling accident of Well Qionglai 1 (I: Major inducement events of the accident

    Directory of Open Access Journals (Sweden)

    Yingfeng Meng

    2015-12-01

    Full Text Available Nitrogen drilling in poor tight gas sandstone should be safe because of very low gas production. But a serious accident of fire blowout occurred during nitrogen drilling of Well Qionglai 1. This is the first nitrogen drilling accident in China, which was beyond people's knowledge about the safety of nitrogen drilling and brought negative effects on the development of gas drilling technology still in start-up phase and resulted in dramatic reduction in application of gas drilling. In order to form a correct understanding, the accident was systematically analyzed, the major events resulting in this accident were inferred. It is discovered for the first time that violent ejection of rock clasts and natural gas occurred due to the sudden burst of downhole rock when the fractured tight gas zone was penetrated during nitrogen drilling, which has been named as “rock burst and blowout by gas bomb”, short for “rock burst”. Then all the induced events related to the rock burst are as following: upthrust force on drilling string from rock burst, bridging-off formed and destructed repeatedly at bit and centralizer, and so on. However, the most direct important event of the accident turns out to be the blockage in the blooie pipe from rock burst clasts and the resulted high pressure at the wellhead. The high pressure at the wellhead causes the blooie pipe to crack and trigged blowout and deflagration of natural gas, which is the direct presentation of the accident.

  2. Four years after the JCO criticality accident

    International Nuclear Information System (INIS)

    Sumita, Kenji

    2003-01-01

    It has been about four years since the first criticality accident in Japan. The JCO accident site was not so far from this auditorium. I have been asked to give a short review of important results from the various technical investigations on the accident that have been performed during the past four years. I will also give a short introduction to the changes that have been made in the nuclear safety regulation systems of the Japanese Government. (author)

  3. Emergency Preparedness. HERCA-Approach for a better cross-border coordination of protective actions during the response in the early phase of a nuclear accident; development and practical testing

    International Nuclear Information System (INIS)

    Aaltonen, Hannele; Kuusi, Antero; Bijlholt, Jette; Calvaro, Jose-Manuel Martin; Mozas Garcia, Alfredo; Constantinou, Costas; Janssens, Augustin; ); Degueldre, Didier; Vandecasteele, Christian; Willems, Petra; Djounova, Jana; Fueloep, Nandor; Gering, Florian; Lieser, Joachim; Halldorsson, Oskar; Haywood, Stephanie; Hofer, Peter; Holo, Eldri; Hubbard, Lynn; Lindh, Karin; Isnard, Olivier; Kuhlen, Johannes; Rother, Wolfram; Lachaume, Jean-Luc; Perrin, Marie-Line; Xicluna, Delphine; Majerus, Patrick; McMahon, Ciara; Murith, Christophe; Nizamska, Marina; Rauber, Dominique; Rusch, Ronald; Stahl, Thorsten; Stephen, Patrick; Tkavc, Marjan; Van Gelder, Iris

    2014-06-01

    The HERCA-Approach on emergencies relies on the following principles: mutual understanding, coordination and mutual trust. It does not aim at proposing a uniform cross border framework to deal with such situations. The main strategy is to aim at an alignment of the response between neighbouring countries, or neighbouring territories. The HERCA-Approach comprises mechanisms of early information exchanges allowing neighbouring countries to align measures for protective actions by using as far as possible the existing dedicated bilateral and international arrangements. The HERCA-Approach is divided into 3 steps, the preparedness phase, the early phase and the later phase (development of a common situation report). The approach contains the main principles and leaves necessary margins of freedom for detailed implementation: - In preparedness the aim is to achieve and maintain a shared understanding of the existing national emergency arrangements through the improvement of bilateral or multilateral arrangements, the testing of these arrangements and the implementation of improvements. - In the early phase of an accident, the proposed HERCA-Approach foresees rapid information exchanges by using as far as possible the existing dedicated bilateral and international arrangements, including the exchange of liaison officers as appropriate. If the response is thought consistent, the neighbouring countries can recommend to their governments to follow these recommendations, i.e. adopt the principle that in the first hours, 'we do the same as the accident country'. - In the later phase a common situation report, accepted by all impacted countries, will further support coordinated protective actions. The HERCA-Approach has been tested and validated against concrete and realistic accident scenarios in NPPs that are close enough to national borders. Therefore a workshop was organized in September 2013. The workshop showed that in case of a sufficient information exchange most

  4. Severe Accident Research Program plan update

    International Nuclear Information System (INIS)

    1992-12-01

    In August 1989, the staff published NUREG-1365, ''Revised Severe Accident Research Program Plan.'' Since 1989, significant progress has been made in severe accident research to warrant an update to NUREG-1365. The staff has prepared this SARP Plan Update to: (1) Identify those issues that have been closed or are near completion, (2) Describe the progress in our understanding of important severe accident phenomena, (3) Define the long-term research that is directed at improving our understanding of severe accident phenomena and developing improved methods for assessing core melt progression, direct containment heating, and fuel-coolant interactions, and (4) Reflect the growing emphasis in two additional areas--advanced light water reactors, and support for the assessment of criteria for containment performance during severe accidents. The report describes recent major accomplishments in understanding the underlying phenomena that can occur during a severe accident. These include Mark I liner failure, severe accident scaling methodology, source term issues, core-concrete interactions, hydrogen transport and combustion, TMI-2 Vessel Investigation Project, and direct containment heating. The report also describes the major planned activities under the SARP over the next several years. These activities will focus on two phenomenological issues (core melt progression, and fuel-coolant interactions and debris coolability) that have significant uncertainties that impact our understanding and ability to predict severe accident phenomena and their effect on containment performance SARP will also focus on severe accident code development, assessment and validation. As the staff completes the research on severe accident issues that relate to current generation reactors, continued research will focus on efforts to independently evaluate the capability of new advanced light water reactor designs to withstand severe accidents

  5. The effect of vehicle characteristics on road accidents

    CERN Document Server

    Jones, I S

    2016-01-01

    The Effect of Vehicle Characteristics on Road Accidents investigates whether vehicle characteristics related to handling and stability contribute to road accidents. Using multiple regression analysis, this book addresses driver and vehicle effects separately in order to define both the magnitude of the handling/accident causation problem as well as the relative importance of the various performance measures. This monograph is comprised of six chapters and begins with detailed studies of accidents to determine the circumstances which lead to loss of control or overturning of a car on the road, and which accidents are likely to be influenced by the handling and stability characteristics of cars. Accident rates for these types of accident are then examined for the more popular models of car. Measures of vehicle handling and stability related to accident rates are also discussed. This text will be a useful resource for motorists and road engineers as well as transportation officials.

  6. Prevalence of seat belt and mobile phone use and road accident injuries amongst college students in Kerman, Iran

    Directory of Open Access Journals (Sweden)

    Mohammadi Ghorbanali

    2011-06-01

    Full Text Available 【Abstract】 Objective: To investigate the prevalence of mobile phone and seat belt use in driving in college stu- dents aged 18-24 years. Methods: The study consisted of two phases. In the first phase, a questionnaire was given to 265 college students. The sample contained 188 males and 77 females. In the second phase, the data pertaining to road accident injuries from March 20, 2007 to March 20, 2008 were collected from Bahonar Central Hospital in Kerman, Iran, and analyzed. Results: There were 14.0% of male and 19.0% of fe- male participants traveled belted while driving on urban roads. It indicated that the participants unbelted or using mobile phone were more involved in accidents in last three years. This study also revealed that 19.0% of male and 4.2% of female drivers considered using mobile phone in driving not hazardous. The highest injury and property damage crash rates were 87 and 137 per 100 000 inhabitants, which occured in male group aged 18-24 years. And 30% of all fatalities were 19-24 years old. Conclusions: More than 50% of college students trav- eled unbelted. The females were less involved in road acci- dent injuries. The college students aged 18-24 years had the highest percentages of trauma and head injury. Key words: Craniocerebral trauma; Accidents, traffic; Seat belts; Cellular phone

  7. Research activities about the radiological consequences of the Chernobyl NPS accident and social activities to assist the sufferers by the accident

    International Nuclear Information System (INIS)

    Imanaka, T.

    1998-03-01

    The 12th anniversary is coming soon of the accident at the Chernobyl nuclear power station in the former USSR on April 26, 1986. Many issues are, however, still unresolved about the radiological impacts on the environment and people due to the Chernobyl accident. This report contains the results of an international collaborative project about the radiological consequences of the Chernobyl accident, carried out from November 1995 to October 1997 under the research grant of the Toyota foundation. Collaborative works were promoted along with the following 5 sub-themes: 1) General description of research activities in Russia, Belarus and Ukraine concerning the radiological consequences of the accident. 2) Investigation of the current situation of epidemiological studies about Chernobyl in each affected country. 3) Investigation of acute radiation syndrome among inhabitants evacuated soon after the accident from the 30 km zone around the Chernobyl NPS. 4) Overview of social activities to assist the sufferers by the accident in each affected country. 5) Preparation of special reports of interesting studies being carried out in each affected country. The 27 papers are indexed individually. (J.P.N.)

  8. Accident management insights after the Fukushima Daiichi NPP accident

    International Nuclear Information System (INIS)

    Degueldre, Didier; Viktorov, Alexandre; Tuomainen, Minna; Ducamp, Francois; Chevalier, Sophie; Guigueno, Yves; Tasset, Daniel; Heinrich, Marcus; Schneider, Matthias; Funahashi, Toshihiro; Hotta, Akitoshi; Kajimoto, Mitsuhiro; Chung, Dae-Wook; Kuriene, Laima; Kozlova, Nadezhda; Zivko, Tomi; Aleza, Santiago; Jones, John; McHale, Jack; Nieh, Ho; Pascal, Ghislain; ); Nakoski, John; Neretin, Victor; Nezuka, Takayoshi; )

    2014-01-01

    The Fukushima Daiichi nuclear power plant (NPP) accident, that took place on 11 March 2011, initiated a significant number of activities at the national and international levels to reassess the safety of existing NPPs, evaluate the sufficiency of technical means and administrative measures available for emergency response, and develop recommendations for increasing the robustness of NPPs to withstand extreme external events and beyond design basis accidents. The OECD Nuclear Energy Agency (NEA) is working closely with its member and partner countries to examine the causes of the accident and to identify lessons learnt with a view to the appropriate follow-up actions to be taken by the nuclear safety community. Accident management is a priority area of work for the NEA to address lessons being learnt from the accident at the Fukushima Daiichi NPP following the recommendations of Committee on Nuclear Regulatory Activities (CNRA), Committee on the Safety of Nuclear Installations (CSNI), and Committee on Radiation Protection and Public Health (CRPPH). Considering the importance of these issues, the CNRA authorised the formation of a task group on accident management (TGAM) in June 2012 to review the regulatory framework for accident management following the Fukushima Daiichi NPP accident. The task group was requested to assess the NEA member countries needs and challenges in light of the accident from a regulatory point of view. The general objectives of the TGAM review were to consider: - enhancements of on-site accident management procedures and guidelines based on lessons learnt from the Fukushima Daiichi NPP accident; - decision-making and guiding principles in emergency situations; - guidance for instrumentation, equipment and supplies for addressing long-term aspects of accident management; - guidance and implementation when taking extreme measures for accident management. The report is built on the existing bases for capabilities to respond to design basis

  9. Investigation of the radiological impact of reactor accidents under probabilistic aspects

    International Nuclear Information System (INIS)

    Huebschmann, W.; Vogt, S.

    1977-01-01

    An analysis and conceptional investigation have been performed for the accident consequence model of the German reactor risk study. A dynamic atmospheric diffusion model is developed, which is applied in the first stage of the study to all distance ranges, and will be restricted finally to the long distance range. The wind direction and its variations are not taken into account in this model. The program set UFO-BAS calculates the time integrated nuclide concentration in air at any location downwind of the source. A further model which takes into account wind direction variations is being developed. On the basis of the proposals for the calculation of the health effects in the German risk study considerations on the storage requirements were accomplished. By means of these assessments a revised grid of parameters was evaluated. Furthermore, considerations were made for the implementation of an evaluation model, which will be developed by the Institut fuer Unfallforschung. (orig./RW) [de

  10. Making eco-friendly transportation safer: developing computer-based simulations to assess of the impacts of bicycle accident prevention interventions on healthcare utilization.

    Science.gov (United States)

    Juhra, Christian; Borycki, Elizabeth M; Kushniruk, Andre W; Anderson, Jim; Anderson, Marilyn

    2011-01-01

    Computer-based modeling and simulations are becoming increasingly used for applications in health and safety. In this paper we describe a multi-phase project aimed at modeling bicycle accidents in Munster, Germany. The work involved a first phase of collecting empirical data on accident rates and severity. In the second phase a computer-based simulation model of bicycle accidents was created, using data from phase one to identify relevant parameters in the model. Finally, initial results from running the model are described that will be used to inform decision making regarding safety initiatives.

  11. Investigation of controlled flight into terrain : descriptions of flight paths for selected controlled flight into terrain (CFIT) aircraft accidents, 1985-1997

    Science.gov (United States)

    1999-03-01

    This report documents an investigation of the flight paths of 13 selected controlled flight into terrain (CFIT) aircraft accidents that occurred between 1985 and 1997. The Operations Assessment Division (DTS-43) and the Aviation Safety Division (DTS-...

  12. Database on aircraft accidents

    International Nuclear Information System (INIS)

    Nishio, Masahide; Koriyama, Tamio

    2013-11-01

    The Reactor Safety Subcommittee in the Nuclear Safety and Preservation Committee published 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' as the standard method for evaluating probability of aircraft crash into nuclear reactor facilities in July 2002. In response to this issue, Japan Nuclear Energy Safety Organization has been collecting open information on aircraft accidents of commercial airplanes, self-defense force (SDF) airplanes and US force airplanes every year since 2003, sorting out them and developing the database of aircraft accidents for the latest 20 years to evaluate probability of aircraft crash into nuclear reactor facilities. In this report the database was revised by adding aircraft accidents in 2011 to the existing database and deleting aircraft accidents in 1991 from it, resulting in development of the revised 2012 database for the latest 20 years from 1992 to 2011. Furthermore, the flight information on commercial aircrafts was also collected to develop the flight database for the latest 20 years from 1992 to 2011 to evaluate probability of aircraft crash into reactor facilities. The method for developing the database of aircraft accidents to evaluate probability of aircraft crash into reactor facilities is based on the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' described above. The 2012 revised database for the latest 20 years from 1992 to 2011 shows the followings. The trend of the 2012 database changes little as compared to the last year's report. (1) The data of commercial aircraft accidents is based on 'Aircraft accident investigation reports of Japan transport safety board' of Ministry of Land, Infrastructure, Transport and Tourism. The number of commercial aircraft accidents is 4 for large fixed-wing aircraft, 58 for small fixed-wing aircraft, 5 for large bladed aircraft and 99 for small bladed aircraft. The relevant accidents

  13. Trend of elevator-related accidents in tehran.

    Science.gov (United States)

    Khaji, Ali; Ghodsi, Syyed Mohammad

    2014-06-01

    Elevator-related accidents are uncommon, but can cause significant injury. However, little data exist on these types of accidents. To compile and analyze accident data involving elevators in an effort to eliminate or at least significantly reduce such accidents. In this retrospective study we investigated 1,819 cases of elevator-related accidents during a four-year period (1999-2003) in Tehran. The data were obtained from the Tehran Safety Services & Fire Fighting Organization (TSFO) that is officially and solely responsible to conduct rescue missions of civilians in Tehran. The number of elevator accidents has increased steadily during the four year study period. During these four years there was a positive upward trend for serious injuries and mortality resulting from elevator accidents. Technical problems were the main cause with 74.5%, followed by power loss and overcapacity riding with 11.5% and 7.9% respectively. Sixty-three individuals sustained serious injury and 15 people died as a result of elevator accidents. The number of accidents was significantly higher in summer (x2=18.32, P=0.032) and a considerable proportion of incidences (54%, 947 cases out of 1819) occurred between 5 and 12 pm. Establishment of an organization to inspect the settings, maintenance, and repair of elevators is necessary.

  14. Improving aircraft accident forecasting for an integrated plutonium storage facility

    International Nuclear Information System (INIS)

    Rock, J.C.; Kiffe, J.; McNerney, M.T.; Turen, T.A.

    1998-06-01

    Aircraft accidents pose a quantifiable threat to facilities used to store and process surplus weapon-grade plutonium. The Department of Energy (DOE) recently published its first aircraft accident analysis guidelines: Accident Analysis for Aircraft Crash into Hazardous Facilities. This document establishes a hierarchy of procedures for estimating the small annual frequency for aircraft accidents that impact Pantex facilities and the even smaller frequency of hazardous material released to the environment. The standard establishes a screening threshold of 10 -6 impacts per year; if the initial estimate of impact frequency for a facility is below this level, no further analysis is required. The Pantex Site-Wide Environmental Impact Statement (SWEIS) calculates the aircraft impact frequency to be above this screening level. The DOE Standard encourages more detailed analyses in such cases. This report presents three refinements, namely, removing retired small military aircraft from the accident rate database, correcting the conversion factor from military accident rates (accidents per 100,000 hours) to the rates used in the DOE model (accidents per flight phase), and adjusting the conditional probability of impact for general aviation to more accurately reflect pilot training and local conditions. This report documents a halving of the predicted frequency of an aircraft impact at Pantex and points toward further reductions

  15. The program system UFOMOD for assessing the consequences of nuclear accidents

    International Nuclear Information System (INIS)

    Ehrhardt, J.; Burkart, K.; Hasemann, I.; Matzerath, C.; Panitz, H.J.; Steinhauer, C.

    1988-10-01

    The programm system UFOMOD is a completely new accident consequence assessment (ACA) code. Its structure and modelling is based on the experience gained from applications of the old UFOMOD code during and after the German Risk Study - Phase A, the results of scientific investigations performed within the ongoing Phase B and the CEC-project MARIA, and the requirements resulting from the extended use of ACAs to help in decision-making. One of the most important improvements is the introduction of different trajecotry models for describing atmospheric dispersion in the near range and at larger distances. Emergency actions and countermeasures modelling takes into account recommendations of international commissions. The dosimetric models contain completely new age-, sex- and time-dependent data of dose-conversion factors for external and internal radiation; the ingestion pathway is modelled to consider seasonal dependencies. New dose-risk-relationships for stochastic and non-stochastic health effects are implemented; a special algorithm developed for ACA codes allows individual and collective leukemia and cancer risks to be presented as a function of time after the accident. According to the modular structure of the new program system UFOMOD, an easy access to parameter values and the results of the various submodels exists what facilitates sensitivity and uncertainty analyses. (orig.) [de

  16. Possibilities of hydrogen removal. Phase 2: Limitation of hydrogen effects in hypothetical severe accidents in PWR reactors

    International Nuclear Information System (INIS)

    Langer, G.; Koehling, A.; Nikodem, H.

    1984-01-01

    In the event of hypothetical severe accidents in light-water reactors, considerable amounts of hydrogen may be produced and released into the containment. Combustion of the hydrogen may jeopardize the integrity of the containment. The study reported here aimed to identify methods to mitigate the hydrogen problem. These methods should either prevent hydrogen combustion, or limit its effects. The following methods have been investigated: pre-inerting; chemical oxygen absorption; removal of oxygen by combustion; post-inerting with N 2 , CO 2 , or halon; aqueous foam; water fog; deliberate ignition; containment purging; and containment venting. The present state of the art in both nuclear and non-nuclear facilities, has been identified. The assessment of the methods was based on accident scenarios assuming significant release of hydrogen and the spectrum of requirements derived from these scenarios was used to determine the advantages and drawbacks of the various methods, assuming their application in a pressurized water reactor of German design. (orig./RW) [de

  17. Development of severe accident evaluation technology (level 2 PSA) for sodium-cooled fast reactors. (3) Identification of dominant factors in transition phase of unprotected events

    International Nuclear Information System (INIS)

    Tobita, Yoshiharu; Yamano, Hidemasa; Sato, Ikken

    2009-01-01

    The event progression of the transition phase in the unprotected loss of flow accident of the JSFR design concept was analyzed using the SIMMER-III code reflecting the knowledge obtained from the EAGLE experimental program. It was clarified through the parametric calculations that the fuel discharge behavior through the paths such as the inner duct of modified-FAIDUS and control-rod guide tube is playing a very important role. Effective fuel discharge through these paths prevents possibility of severe recriticality events. Important factors dominating the transition phase were identified through these parametric calculations. (author)

  18. Contribution of the Exposure Pathways After a Severe Accident

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Joeun; Hwang, Wontae; Han, Moonhee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Jae, Moosung [Hanyang University, Seoul (Korea, Republic of)

    2016-10-15

    A radiological dose assessment calculates the amount of radiation energy absorbed by a potentially exposed individual as a result of a specific exposure. Public can be exposure from several exposure pathways. External doses occur when the body is exposed to radioactive material outside the body. When making the emergency preparedness for severe accident from NPPs, therefore, we need to have comprehension about those exposure pathways. Thus, in this study, an evaluation of external and internal dose from radioactive materials during severe accident was performed to find out exposure pathway from which the dose has the highest value for several radionuclides. The basic study to make out the relation between exposure pathways and dose from them was performed. In the emergency phase, the most affecting nuclide type on public was noble gas, especially {sup 133}Xe, and the dominant exposure pathway was could shine. Also, in the long term-phase, the most affecting nuclide type on public was fission product, especially {sup 90}Sr, and the dominant exposure pathway was water ingestion. The information of the dose composition from exposure pathway obtained in this study might be basic data for making emergency preparedness plan for severe accident. In the future, assessment of the source term is expected to enhance the reliability of dose assessment during severe accident.

  19. Compilation of accident statistics in PSE

    International Nuclear Information System (INIS)

    Jobst, C.

    1983-04-01

    The objective of the investigations on transportation carried out within the framework of the 'Project - Studies on Safety in Waste Management (PSE II)' is the determination of the risk of accidents in the transportation of radioactive materials by rail. The fault tree analysis is used for the determination of risks in the transportation system. This method offers a possibility for the determination of frequency and consequences of accidents which could lead to an unintended release of radionuclides. The study presented compiles all data obtained from the accident statistics of the Federal German Railways. (orig./RB) [de

  20. LMFBR post accident heat removal testing needs and conceptual design of a test facility

    International Nuclear Information System (INIS)

    Kleefeldt, K.; Kuechle, M.; Royl, P.; Werle, H.; Boenisch, G.; Heinzel, V.; Mueller, R.A.; Schramm, K.; Smidt, D.

    1977-03-01

    A study has been carried out in which the needs and requirements for a test facility were derived, enabling detailed investigation of key phenomena anticipated during the post accident heat removal (PAHR) phase as a consequence of a postulated LMFBR whole core accident. Part I of the study concentrates on demonstrating the PAHR phenomena and related testing needs. Three types of experiments were identified which require in-pile testing, ranging from 10 to 70 cm test bed diameter and correspondingly, 30 to 5 W/g minimum power density in the test fuel. In part II a conceptual design for a test facility is presented, emphasizing the capability for accomodating large test beds. This is achieved by a below-reactor-vessel testing device, neutronically coupled to a 100 MWt sodium cooled fast reactor. (orig.) [de

  1. Modeling secondary accidents identified by traffic shock waves.

    Science.gov (United States)

    Junhua, Wang; Boya, Liu; Lanfang, Zhang; Ragland, David R

    2016-02-01

    The high potential for occurrence and the negative consequences of secondary accidents make them an issue of great concern affecting freeway safety. Using accident records from a three-year period together with California interstate freeway loop data, a dynamic method for more accurate classification based on the traffic shock wave detecting method was used to identify secondary accidents. Spatio-temporal gaps between the primary and secondary accident were proven be fit via a mixture of Weibull and normal distribution. A logistic regression model was developed to investigate major factors contributing to secondary accident occurrence. Traffic shock wave speed and volume at the occurrence of a primary accident were explicitly considered in the model, as a secondary accident is defined as an accident that occurs within the spatio-temporal impact scope of the primary accident. Results show that the shock waves originating in the wake of a primary accident have a more significant impact on the likelihood of a secondary accident occurrence than the effects of traffic volume. Primary accidents with long durations can significantly increase the possibility of secondary accidents. Unsafe speed and weather are other factors contributing to secondary crash occurrence. It is strongly suggested that when police or rescue personnel arrive at the scene of an accident, they should not suddenly block, decrease, or unblock the traffic flow, but instead endeavor to control traffic in a smooth and controlled manner. Also it is important to reduce accident processing time to reduce the risk of secondary accident. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Unavoidable Accident

    OpenAIRE

    Grady, Mark F.

    2009-01-01

    In negligence law, "unavoidable accident" is the risk that remains when an actor has used due care. The counterpart of unavoidable accident is "negligent harm." Negligence law makes parties immune for unavoidable accident even when they have used less than due care. Courts have developed a number of methods by which they "sort" accidents to unavoidable accident or to negligent harm, holding parties liable only for the latter. These sorting techniques are interesting in their own right and als...

  3. Stepwise integral scaling method and its application to severe accident phenomena

    International Nuclear Information System (INIS)

    Ishii, M.; Zhang, G.

    1993-10-01

    Severe accidents in light water reactors are characterized by an occurrence of multiphase flow with complicated phase changes, chemical reaction and various bifurcation phenomena. Because of the inherent difficulties associated with full-scale testing, scaled down and simulation experiments are essential part of the severe accident analyses. However, one of the most significant shortcomings in the area is the lack of well-established and reliable scaling method and scaling criteria. In view of this, the stepwise integral scaling method is developed for severe accident analyses. This new scaling method is quite different from the conventional approach. However, its focus on dominant transport mechanisms and use of the integral response of the system make this method relatively simple to apply to very complicated multi-phase flow problems. In order to demonstrate its applicability and usefulness, three case studies have been made. The phenomena considered are (1) corium dispersion in DCH, (2) corium spreading in BWR MARK-I containment, and (3) incore boil-off and heating process. The results of these studies clearly indicate the effectiveness of their stepwise integral scaling method. Such a simple and systematic scaling method has not been previously available to severe accident analyses

  4. Horonobe Underground Research Laboratory project. Synthesis of phase II (construction phase) investigations to a depth of 350 m

    International Nuclear Information System (INIS)

    Sato, Toshinori; Sasamoto, Hiroshi; Ishii, Eiichi; Matsuoka, Toshiyuki; Hayano, Akira; Miyakawa, Kazuya; Fujita, Tomoo; Tanai, Kenji; Nakayama, Masashi; Takeda, Masaki; Yokota, Hideharu; Aoyagi, Kazuhei; Ohno, Hirokazu; Shigeta, Naotaka; Hanamuro, Takahiro; Ito, Hiroaki

    2017-03-01

    The Horonobe Underground Research Laboratory (URL) Project is being pursued by the Japan Atomic Energy Agency (JAEA) to enhance the reliability of relevant disposal technologies through investigations of the deep geological environment within the host sedimentary formations at Horonobe, northern Hokkaido. The project consists of two major research areas, 'Geoscientific Research' and 'R and D on Geological Disposal', and proceeds in three overlapping phases, 'Phase I: Surface-based investigation', 'Phase II: Construction' and 'Phase III: Operation', over a period of 20 years. This report summarizes the results of the Phase II investigations carried out from April 2005 to June 2014 to a depth of 350 m. Integration of work from different disciplines into a 'geosynthesis' ensures that the Phase II goals have been successfully achieved and identifies key issues that need to be addressed in the Phase II investigations. Efforts are made to summarize as many lessons learnt from the Phase II investigations and other technical achievements as possible to form a 'knowledge base' that will reinforce the technical basis for both implementation and the formulation of safety regulations. (author)

  5. The investigation on the public panic caused from the Fukushima nuclear accident

    International Nuclear Information System (INIS)

    Liao Li; Wang Yilong; He Xu

    2012-01-01

    March 11, 2011, a huge earthquake and tidal waves in Japan lead to dangerous levels of nuclear leakage at Fukushima nuclear plant, the nuclear accident also cause public panic m many countries. To investigate the reason of the public panic, we employ the theories of sociology and psychology, analyzed that the public panic come from Ignorant Panic. Herd Behavior, Primacy Effect, Stereotype Activation Effect, and the superposition of these effects. In addition, we proposed three measures to the public panic: First, we should emphasize the safety of nuclear power and establish the positive image of nuclear power Second, we should emphasize the popular science of nuclear power so that nu clear power can be accepted in the public; Third, we should enhance the psychological intervention system for nuclear safe emergency and improve the effect of psychological intervention

  6. Application of advanced statistical methods in assessment of the late phase of a nuclear accident

    International Nuclear Information System (INIS)

    Hofman, R.

    2008-01-01

    The paper presents a new methodology for improving of estimates of radiological situation on terrain in the late phase of a nuclear accident. Methods of Bayesian filtering are applied to the problem. The estimates are based on combination of modeled and measured data provided by responsible authorities. Exploiting information on uncertainty of both the data sources, we are able to produce improved estimate of the true situation on terrain. We also attempt to account for model error, which is unknown and plays crucial role in accuracy of the estimates. The main contribution of this paper is application of an approach based on advanced statistical methods, which allows for estimating of model error covariance structure upon measurements. Model error is estimated on basis of measured-minus-observed residuals evaluated upon measured and modeled values. The methodology is demonstrated on a sample scenario with simulated measurements. (authors)

  7. Application of advanced statistical methods in assessment of the late phase of a nuclear accident

    International Nuclear Information System (INIS)

    Hofman, R.

    2009-01-01

    The paper presents a new methodology for improving of estimates of radiological situation on terrain in the late phase of a nuclear accident. Methods of Bayesian filtering are applied to the problem. The estimates are based on combination of modeled and measured data provided by responsible authorities. Exploiting information on uncertainty of both the data sources, we are able to produce improved estimate of the true situation on terrain. We also attempt to account for model error, which is unknown and plays crucial role in accuracy of the estimates. The main contribution of this paper is application of an approach based on advanced statistical methods, which allows for estimating of model error covariance structure upon measurements. Model error is estimated on basis of measured-minus-observed residuals evaluated upon measured and modeled values. The methodology is demonstrated on a sample scenario with simulated measurements. (authors)

  8. Predicted occurrence rate of severe transportation accidents involving large casks

    International Nuclear Information System (INIS)

    Dennis, A.W.

    1978-01-01

    A summary of the results of an investigation of the severities of highway and railroad accidents as they relate to the shipment of large radioactive materials casks is discussed. The accident environments considered are fire, impact, crash, immersion, and puncture. For each of these environments, the accident severities and their predicted frequencies of occurrence are presented. These accident environments are presented in tabular and graphic form to allow the reader to evaluate the probabilities of occurrence of the accident parameter severities he selects

  9. Determinants of the property damage costs of tanker accidents

    International Nuclear Information System (INIS)

    Talley, W.K.

    1999-01-01

    This study investigates determinants of the vessel, oil cargo spillage, and other-property damage costs of tanker accidents. Tobit estimation of a three-equation recursive model suggests that, among types of tanker accidents, fire/explosion accidents incur the largest vessel damage costs, but the smallest oil cargo spillage costs. Alternatively, grounding accidents incur the smallest vessel damage costs, but the largest oil cargo spillage costs, reflecting the difficulty of controlling oil cargo spillage subsequent to such accidents. Also, oil cargo spillage costs are lower for US flag tanker accidents. A dollar of vessel damage cost increases other-property damage cost by 0.06 dollars, whereas a dollar of oil cargo spillage increases this cost by 1.55 dollars

  10. 49 CFR 225.15 - Accidents/incidents not to be reported.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Accidents/incidents not to be reported. 225.15... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD ACCIDENTS/INCIDENTS: REPORTS CLASSIFICATION, AND INVESTIGATIONS § 225.15 Accidents/incidents not to be reported. A railroad need not report: (a) Casualties which...

  11. Domino effect in chemical accidents: main features and accident sequences

    OpenAIRE

    Casal Fàbrega, Joaquim; Darbra Roman, Rosa Maria

    2010-01-01

    The main features of domino accidents in process/storage plants and in the transportation of hazardous materials were studied through an analysis of 225 accidents involving this effect. Data on these accidents, which occurred after 1961, were taken from several sources. Aspects analyzed included the accident scenario, the type of accident, the materials involved, the causes and consequences and the most common accident sequences. The analysis showed that the most frequent causes a...

  12. Interface requirements to couple thermal hydraulics codes to severe accident codes: ICARE/CATHARE

    Energy Technology Data Exchange (ETDEWEB)

    Camous, F.; Jacq, F.; Chatelard, P. [IPSN/DRS/SEMAR CE-Cadarache, St Paul Lez Durance (France)] [and others

    1997-07-01

    In order to describe with the same code the whole sequence of severe LWR accidents, up to the vessel failure, the Institute of Protection and Nuclear Safety has performed a coupling of the severe accident code ICARE2 to the thermalhydraulics code CATHARE2. The resulting code, ICARE/CATHARE, is designed to be as pertinent as possible in all the phases of the accident. This paper is mainly devoted to the description of the ICARE2-CATHARE2 coupling.

  13. Criticality accident in uranium fuel processing plant. Emergency medical care and dose estimation for the severely overexposed patients

    Energy Technology Data Exchange (ETDEWEB)

    Akashi, Makoto; Ishigure, Nobuhito [National Inst. of Radiological Sciences, Chiba (Japan)

    2000-08-01

    A criticality accident occurred in JCO, a plant for nuclear fuel production in 1999 and three workers were exposed to extremely high-level radiation (neutron and {gamma}-ray). This report describes outlines of the clinical courses and the medical cares for the patients of this accident and the emergent medical system for radiation accident in Japan. One (A) of the three workers of JCO had vomiting and diarrhea within several minutes after the accident and another one (B) had also vomiting within one hour after. Based on these evidences, the exposure dose of A and B were estimated to be more than 8 and 4 GyEq, respectively. Generally, acute radiation syndrome (ARS) is assigned into three phases; prodromal phase, critical or manifestation phase and recovery phase or death. In the prodromal phase, anorexia, nausea, vomiting and diarrhea often develop, whereas the second phase is asymptotic. In the third phase, various syndromes including infection, hemorrhage, dehydration shock and neurotic syndromes are apt to occur. It is known that radiation exposure at 1 Gy or more might induce such acute radiation syndromes. Based on the clinical findings of Chernobyl accident, it has been thought that exposure at 0.5 Gy or more causes a lowering of lymphocyte level and a decrease in immunological activities within 48 hours. Lymphocyte count is available as an indicator for the evaluation of exposure dose in early phase, but not in later phase The three workers of JCO underwent chemical analysis of blood components, chromosomal analysis and analysis of blood {sup 24}Na immediately after the arrival at National Institute of Radiological Sciences via National Mito Hospital specified as the third and the second facility for the emergency medical care system in Japan, respectively. (M.N.)

  14. The NEA benchmark study of the accident at the Fukushima Daiichi NPP

    International Nuclear Information System (INIS)

    Koganeya, Toshiyuki

    2015-01-01

    In November 2012, the NEA, under the aegis of the Committee on the Safety of Nuclear Installations (CSNI), initiated a joint research project called the Benchmark Study of the Accident at the Fukushima Daiichi Nuclear Power Station (BSAF). Objectives of this project include supporting Fukushima Daiichi decommissioning by analysing accident progression and the current status of the reactors, such as fuel debris distribution in the reactor pressure vessels and primary containment vessels in preparation for fuel debris removal. A second objective of the project is to improve SA (severe analysis) codes through comparisons with data from the Fukushima reactors. So as to enhance communication between analysts and those involved in decommissioning activities, participants in the project have been discussing the remaining uncertainties in relation to understanding the accident and the data needs from the viewpoint of the analysts. Since the accident sequences at the Fukushima Daiichi site include a wide range of phenomena, a phased approach is being applied in this benchmark exercise while awaiting more detailed information on debris examination and other factors. This article provides an overview of the project (scope, input data and boundary conditions, participants (from eight countries), analytical approach - common case and best estimate case) as well as an outline of the project's next phase (BASF phase 2) that begins in June 2015

  15. Comparative analysis of the countermeasures taken to mitigate exposure of the public to radioiodine following the Chernobyl and Fukushima accidents: lessons from both accidents.

    Science.gov (United States)

    Uyba, Vladimir; Samoylov, Alexander; Shinkarev, Sergey

    2018-04-01

    In the case of a severe radiation accident at a nuclear power station, the most important radiation hazard for the public is internal exposure of the thyroid to radioiodine. The purposes of this paper were (i) to compare countermeasures conducted (following the Chernobyl and Fukushima accidents) aimed at mitigation of exposure to the thyroid for the public, (ii) to present comparative estimates of doses to the thyroid and (iii) to derive lessons from the two accidents. The scale and time of countermeasures applied in the early phase of the accidents (sheltering, evacuation, and intake of stable iodine to block the thyroid) and at a later time (control of 131I concentration in foodstuffs) have been described. After the Chernobyl accident, the estimation of the thyroid doses for the public was mainly based on direct thyroid measurements of ~400 000 residents carried out within the first 2 months. The highest estimates of thyroid doses to children reached 50 Gy. After the Fukushima accident, the estimation of thyroid doses was based on radioecological models due to a lack of direct thyroid measurements (only slightly more than 1000 residents were measured). The highest estimates of thyroid doses to children were a few hundred mGy. Following the Chernobyl accident, ingestion of 131I through cows' milk was the dominant pathway. Following the Fukushima accident, it appears that inhalation of contaminated air was the dominant pathway. Some lessons learned following the Chernobyl and Fukushima accidents have been presented in this paper.

  16. WASA-BOSS. Development and application of Severe Accident Codes. Evaluation and optimization of accident management measures. Subproject F. Contributions to code validation using BWR data and to evaluation and optimization of accident management measures. Final report; WASA-BOSS. Weiterentwicklung und Anwendung von Severe Accident Codes. Bewertung und Optimierung von Stoerfallmassnahmen. Teilprojekt F. Beitraege zur Codevalidierung anhand von SWR-Daten und zur Bewertung und Optimierung von Stoerfallmassnahmen. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Di Marcello, Valentino; Imke, Uwe; Sanchez Espinoza, Victor

    2016-09-15

    The exact knowledge of the transient course of events and of the dominating processes during a severe accident in a nuclear power station is a mandatory requirement to elaborate strategies and measures to minimize the radiological consequences of core melt. Two typical experiments using boiling water reactor assemblies were modelled and simulated with the severe accident simulation code ATHLET-CD. The experiments are related to the early phase of core degradation in a boiling water reactor. The results reproduce the thermal behavior and the hydrogen production due to oxidation inside the bundle until relocation of material by melting. During flooding of the overheated assembly temperatures and hydrogen oxidation are under estimated. The deviations from the experimental results can be explained by the missing model to simulate bore carbide oxidation of the control rods. On basis of a hypothetical loss of coolant accident in a typical German boiling water reactor the effectivity of flooding the partial degraded core is investigated. This measure of mitigation is efficient and prevents failure of the reactor pressure vessel if it starts before molten material is relocated into the lower plenum. Considerable amount of hydrogen is produced by oxidation of the metallic components.

  17. Release of fission products during controlled loss-of-coolant accidents and hypothetical core meltdown accidents

    International Nuclear Information System (INIS)

    Albrecht, H.; Malinauskas, A.P.

    1978-01-01

    A few years ago the Projekt Nukleare Sicherheit joined the United States Nuclear Regulatory Commission in the development of a research program which was designed to investigate fission product release from light water reactor fuel under conditions ranging from spent fuel shipping cask accidents to core meltdown accidents. Three laboratories have been involved in this cooperative effort. At Argonne National Laboratory (ANL), the research effort has focused on noble gas fission product release, whereas at Oak Ridge National Laboratory (ORNL) and at Kernforschungszentrum Karlsruhe (KfK), the studies have emphasized the release of species other than the noble gases. In addition, the ORNL program has been directed toward the development of fission product source terms applicable to analyses of spent fuel shipping cask accidents and controlled loss-of-coolant accidents, and the KfK program has been aimed at providing similar source terms which are characteristic of core meltdown accidents. The ORNL results are presented for fission product release from defected fuel rods into a steam atmosphere over the temperature range 500 to 1200 0 C, and the KfK results for release during core meltdown sequences

  18. The role of OSHA violations in serious workplace accidents.

    Science.gov (United States)

    Mendeloff, J

    1984-05-01

    California accident investigations for 1976 show that violations of the Occupational Safety and Health Administration's safety standards were a contributing factor in 13% to 19% of the 645 deaths reported to the workers' compensation program during that year. However, a panel of safety engineers judged that only about 50% of these violations could have been detected if an inspector had visited the day before the accident. These findings indicate that the potential gains from stronger enforcement of current standards are limited but not insignificant. The likelihood that a violation contributed to a serious accident varied considerably among accident types, industries, and size classes of plants. These findings can be used to increase the efficiency and effectiveness of the OSHA program by means of better targeting of inspections and accident investigations, more intelligent assessment of which violations should be penalized most heavily, and the provision of information to employers and workers about which violations are most consequential.

  19. Scoping Study Investigating PWR Instrumentation during a Severe Accident Scenario

    Energy Technology Data Exchange (ETDEWEB)

    Rempe, J. L. [Rempe and Associates, LLC, Idaho Falls, ID (United States); Knudson, D. L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lutz, R. J. [Lutz Nuclear Safety Consultant, LLC, Asheville, NC (United States)

    2015-09-01

    The accidents at the Three Mile Island Unit 2 (TMI-2) and Fukushima Daiichi Units 1, 2, and 3 nuclear power plants demonstrate the critical importance of accurate, relevant, and timely information on the status of reactor systems during a severe accident. These events also highlight the critical importance of understanding and focusing on the key elements of system status information in an environment where operators may be overwhelmed with superfluous and sometimes conflicting data. While progress in these areas has been made since TMI-2, the events at Fukushima suggests that there may still be a potential need to ensure that critical plant information is available to plant operators. Recognizing the significant technical and economic challenges associated with plant modifications, it is important to focus on instrumentation that can address these information critical needs. As part of a program initiated by the Department of Energy, Office of Nuclear Energy (DOE-NE), a scoping effort was initiated to assess critical information needs identified for severe accident management and mitigation in commercial Light Water Reactors (LWRs), to quantify the environment instruments monitoring this data would have to survive, and to identify gaps where predicted environments exceed instrumentation qualification envelop (QE) limits. Results from the Pressurized Water Reactor (PWR) scoping evaluations are documented in this report. The PWR evaluations were limited in this scoping evaluation to quantifying the environmental conditions for an unmitigated Short-Term Station BlackOut (STSBO) sequence in one unit at the Surry nuclear power station. Results were obtained using the MELCOR models developed for the US Nuclear Regulatory Commission (NRC)-sponsored State of the Art Consequence Assessment (SOARCA) program project. Results from this scoping evaluation indicate that some instrumentation identified to provide critical information would be exposed to conditions that

  20. 1-D Two-phase Flow Investigation for External Reactor Vessel Cooling

    International Nuclear Information System (INIS)

    Kim, Jae Cheol

    2007-02-01

    During a severe accident, when a molten corium is relocated in a reactor vessel lower head, the RCF(Reactor Cavity Flooding) system for ERVC (External Reactor Vessel Cooling) is actuated and coolants are supplied into a reactor cavity to remove a decay heat from the molten corium. This severe accident mitigation strategy for maintaining a integrity of reactor vessel was adopted in the nuclear power plants of APR1400, AP600, and AP1000. Under the ERVC condition, the upward two-phase flow is driven by the amount of the decay heat from the molten corium. To achieve the ERVC strategy, the two-phase natural circulation in the annular gap between the external reactor vessel and the insulation should be formed sufficiently by designing the coolant inlet/outlet area and gap size adequately on the insulation device. Also the natural circulation flow restriction has to be minimized. In this reason, it is needed to review the fundamental structure of insulation. In the existing power plants, the insulation design is aimed at minimizing heat losses under a normal operation. Under the ERVC condition, however, the ability to form the two-phase natural circulation is uncertain. Namely, some important factors, such as the coolant inlet/outlet areas, flow restriction, and steam vent etc. in the flow channel, should be considered for ERVC design. T-HEMES 1D study is launched to estimate the natural circulation flow under the ERVC condition of APR1400. The experimental facility is one-dimensional and scaled down as the half height and 1/238 channel area of the APR1400 reactor vessel. The air injection method was used to simulate the boiling at the external reactor vessel and generate the natural circulation two-phase flow. From the experimental results, the natural circulation flow rate highly depended on inlet/outlet areas and the circulation flow rate increased as the outlet height as well as the supplied water head increased. On the other hand, the simple analysis using the drift

  1. Research on the improvement of nuclear safety -A study on the establishment of severe accident experimental facility-

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Kune Yull; Ryu, Keon Joong; Park, Chang Kyu; Sim, Seok Ku; Kim, Sang Baek; Nho, Ki Mann; Bang, Kwang Hyun; Park, Rae Jun; Lee, Seong Jae; Kang, Kyung Ho; Jo, Young Ro; Hong, Sung Wan; Jeong, Moon Ki; Park, Chun Kyung; Cheon, Se Young; Kim, In Sik; Moon, Sang Ki; Kim, Jong Hwan; Kim, Seong Ho; Sin, Ki Yeol; Cho, Jae Sun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-07-01

    For the first phase (1992-1995) of the current research program under nuclear reactor safety enhancement project, the primary objective was placed on the development of an improved cavity design and on the improvement of theoretical models of the separate effects for major severe accident phenomena occurring in the reactor cavity. Also, during the fourth year of this project, small-scale experiments were performed to visualize the fundamental phenomena of boiling in narrow spaces that may exist between the debris crust and the reactor vessel lower head in preparation for the large-scale in-vessel cooling experiment planned for the second phase of the project (1996-2001). Separate effect tests have been performed during the first phase spanning the high pressure melt ejection (HPME) resulting in the direct containment heating (DCH), crust formation during cooling of the high temperature melt, fuel coolant interaction (FCI) in the process of injecting coolant onto the reactor cavity, and the molten core concrete interaction (MCCI). Some research programs were subcontracted with universities. Steam condensation on the containment inner wall was investigated by the POSTECH, while the experimental technique for the simultaneous measurement of particle size and velocity was developed by the KAIST. The second phase experimental projects center about the in-vessel accident management tests SONATA-IV (Simulation of Naturally Arrested Thermal Attack in Vessel) and ex-vessel accident management tests TOCATA-XV (Tests on Cavity Arrested Thermal Attack ex Vessel). In preparation for the second phase in-vessel experimental program, one of our research staff has participated in the PHEBUS-FP program in CEA Cadarache, France. Small-scale scoping tests were performed for the study of in-vessel cooling of debris in the lower head. (Abstract Truncated)

  2. Trend of Elevator-Related Accidents in Tehran

    Directory of Open Access Journals (Sweden)

    Ali Khaji

    2014-06-01

    Full Text Available Background:   Elevator-related accidents are uncommon, but can cause significant injury. However, little data exist on these types of accidents. To compile and analyze accident data involving elevators in an effort to eliminate or at least significantly reduce such accidents. Methods: In this retrospective study we investigated 1,819 cases of elevator-related accidents during a four-year period (1999-2003 in Tehran. The data were obtained from the Tehran Safety Services & Fire Fighting Organization (TSFO that is officially and solely responsible to conduct rescue missions of civilians in Tehran. Results: The number of elevator accidents has increased steadily during the four year study period. During these four years here was a positive upward trend for serious injuries and mortality resulting from elevator accidents. Technical problems were the main cause with 74.5%, followed by power loss and overcapacity riding with 11.5% and 7.9%respectively. Sixty-three individuals sustained serious injury and 15 people died as a result of elevator accidents. The number of accidents was significantly higher in summer (x2=18.32, P=0.032 and a considerable proportion of incidences (54%, 947 cases out of 1819 occurred between 5 and 12 pm. Conclusions: Establishment of an organization to inspect the settings, maintenance, and repair of elevators is necessary

  3. Accidents Preventive Practice for High-Rise Construction

    Directory of Open Access Journals (Sweden)

    Goh Kai Chen

    2016-01-01

    Full Text Available The demand of high-rise projects continues to grow due to the reducing of usable land area in Klang Valley, Malaysia. The rapidly development of high-rise projects has leaded to the rise of fatalities and accidents. An accident that happened in a construction site can cause serious physical injury. The accidents such as people falling from height and struck by falling object were the most frequent accidents happened in Malaysian construction industry. The continuous growth of high-rise buildings indicates that there is a need of an effective safety and health management. Hence, this research aims to identify the causes of accidents and the ways to prevent accidents that occur at high-rise building construction site. Qualitative method was employed in this research. Interview surveying with safety officers who are involved in highrise building project in Kuala Lumpur were conducted in this research. Accidents were caused by man-made factors, environment factors or machinery factors. The accidents prevention methods were provide sufficient Personal Protective Equipment (PPE, have a good housekeeping, execute safety inspection, provide safety training and execute accidents investigation. In the meanwhile, interviewees have suggested the new prevention methods that were develop a proper site layout planning and de-merit and merit system among sub-contractors, suppliers and even employees regarding safety at workplace matters. This research helps in explaining the causes of accidents and identifying area where prevention action should be implemented, so that workers and top management will increase awareness in preventing site accidents.

  4. Public Response to a Near-Miss Nuclear Accident Scenario Varying in Causal Attributions and Outcome Uncertainty.

    Science.gov (United States)

    Cui, Jinshu; Rosoff, Heather; John, Richard S

    2018-05-01

    Many studies have investigated public reactions to nuclear accidents. However, few studies focused on more common events when a serious accident could have happened but did not. This study evaluated public response (emotional, cognitive, and behavioral) over three phases of a near-miss nuclear accident. Simulating a loss-of-coolant accident (LOCA) scenario, we manipulated (1) attribution for the initial cause of the incident (software failure vs. cyber terrorist attack vs. earthquake), (2) attribution for halting the incident (fail-safe system design vs. an intervention by an individual expert vs. a chance coincidence), and (3) level of uncertainty (certain vs. uncertain) about risk of a future radiation leak after the LOCA is halted. A total of 773 respondents were sampled using a 3 × 3 × 2 between-subjects design. Results from both MANCOVA and structural equation modeling (SEM) indicate that respondents experienced more negative affect, perceived more risk, and expressed more avoidance behavioral intention when the near-miss event was initiated by an external attributed source (e.g., earthquake) compared to an internally attributed source (e.g., software failure). Similarly, respondents also indicated greater negative affect, perceived risk, and avoidance behavioral intentions when the future impact of the near-miss incident on people and the environment remained uncertain. Results from SEM analyses also suggested that negative affect predicted risk perception, and both predicted avoidance behavior. Affect, risk perception, and avoidance behavior demonstrated high stability (i.e., reliability) from one phase to the next. © 2017 Society for Risk Analysis.

  5. Behavior of LWR fuel elements under accident conditions

    International Nuclear Information System (INIS)

    Albrecht, H.; Bocek, M.; Erbacher, F.; Fiege, A.; Fischer, M.; Hagen, S.; Hofmann, P.; Holleck, H.; Karb, E.; Leistikow, S.; Melang, S.; Ondracek, G.; Thuemmler, F.; Wiehr, K.

    1977-01-01

    In the frame of the German reactor safety research program, the Kernforschungszentrum Karlsruhe is carrying out a comprehensive program on the behavior of LWR fuel elements under a variety of power cooling mismatch conditions in particular during loss-of-coolant accidents. The major objectives are to establish a detailed quantitative understanding of fuel rod failures mechanisms and their thresholds, to evaluate the safety margins of power reactor cores under accident conditions and to investigate the feedback of fuel rod failures on the efficiency of emergency core cooling systems. This detailed quantitative understanding is achieved through extensive basic and integral experiments and is incorporated in a fuel behavior code. On the basis of these results the design of power reactor fuel elements and of safety devices can be further improved. The results of investigations on the inelastic deformation (ballooning) behavior of Zircaloy 4 cladding at LOCA temperatures in oxidizing atmosphere are presented. Depending upon strain rate and temperature superplastic deformation behavior was observed. In the equation of state of Zry 4 the strain rate sensitivity index depends strongly upon strain and in the superplastic region upon sample anisotropy. Oxidation kinetics experiments with Zry-tubes at 900-1300 0 C showed that the Baker-Just correlation describes the reality quite conservative. Therefore a reduction of the amount of Zry oxidation can be assumed in the course of a LOCA. The external oxidation of Zry-cladding by steam as well as internal oxidation by the oxygen in oxide fuel and fission products (Cs, I, Te) have an influence on the strain and rupture behavior of Zry-cladding at LOCA temperatures. In out-of-pile and inpile experiments the mechanical and thermal behavior of fuel rods during the blowdown, the heatup and the reflood phases of a LOCA are investigated under representative and controlled thermohydraulic conditions. The task of the inpile experiments is

  6. Injury protection and accident causation parameters for vulnerable road users based on German In-Depth Accident Study GIDAS.

    Science.gov (United States)

    Otte, Dietmar; Jänsch, Michael; Haasper, Carl

    2012-01-01

    Within a study of accident data from GIDAS (German In-Depth Accident Study), vulnerable road users are investigated regarding injury risk in traffic accidents. GIDAS is the largest in-depth accident study in Germany. Due to a well-defined sampling plan, representativeness with respect to the federal statistics is also guaranteed. A hierarchical system ACASS (Accident Causation Analysis with Seven Steps) was developed in GIDAS, describing the human causation factors in a chronological sequence. The accordingly classified causation factors - derived from the systematic of the analysis of human accident causes ("7 steps") - can be used to describe the influence of accident causes on the injury outcome. The bases of the study are accident documentations over ten years from 1999 to 2008 with 8204 vulnerable road users (VRU), of which 3 different groups were selected as pedestrians n=2041, motorcyclists n=2199 and bicyclists n=3964, and analyzed on collisions with cars and trucks as well as vulnerable road users alone. The paper will give a description of the injury pattern and injury mechanisms of accidents. The injury frequencies and severities are pointed out considering different types of VRU and protective measures of helmet and clothes of the human body. The impact points are demonstrated on the car, following to conclusion of protective measures on the vehicle. Existing standards of protection devices as well as interdisciplinary research, including accident and injury statistics, are described. With this paper, a summarization of the existing possibilities on protective measures for pedestrians, bicyclists and motorcyclists is given and discussed by comparison of all three groups of vulnerable road users. Also the relevance of special impact situations and accident causes mainly responsible for severe injuries are pointed out, given the new orientation of research for the avoidance and reduction of accident patterns. 2010 Elsevier Ltd. All rights reserved.

  7. Cesium-137 accident lessons in Goiania, Goias State, Brazil

    International Nuclear Information System (INIS)

    1990-11-01

    This document relates the experience obtained by several professionals which had an important role in the cesium-137 accident occurred in Goiania, Goias State, Brazil in September, 1987. It's divided into chapters, according to the action area - medical, nursing, social assistance, odontological and psychological. At first, some notions of radioprotection are explained, followed by the accident history and by the doctors and nurses action during the emergency phase and the medical, odontological, social and psychological assistance to the victims. The social assistance report shows some statistical data about the economic, occupational and social conditions of the accident victims. It is shown some information about the health institutions and the sanitary care in the ionizing radiation and about the occupational radiological protection in Goiania

  8. An overview of the severe accident research activities within the LACOMERA platform at the Forschungszentrum Karlsruhe

    International Nuclear Information System (INIS)

    Miassoedov, A.; Alsmeyer, H.; Meyer, L.; Steinbrueck, M.; Tromm, W.

    2006-01-01

    The LACOMERA project at the Forschungszentrum Karlsruhe, Germany, is a 4 year action within the 5th Framework Programme of the EU which started in September 2002. Overall objective of the project is to offer research institutions from the EU member countries and associated states access to four large-scale experimental facilities QUENCH, LIVE, DISCO, and COMET. These facilities can be used to investigate core melt scenarios from the beginning of core degradation to melt formation and relocation in the vessel, possible melt dispersion to the reactor cavity, and finally corium concrete interaction and corium coolability in the reactor cavity. The paper summarises the main results obtained in the following experiments performed up to now. QUENCH-L1: Impact of air ingression on core degradation. The test provides unique data for the investigation of air ingress phenomenology in conditions as representative of a spent fuel pool accident as possible; QUENCH-L2: Boil-off of a flooded bundle. The test is of a generic interest for all reactor types, provided a link between the severe accident and design basis areas, and would deliver oxidation and thermal hydraulic data at high temperatures. DISCO-L1: Thermal hydraulic behaviour of the corium melt dispersion neglecting the chemical effects such as hydrogen generation and combustion. COMET-L1: Long-term 2D concrete ablation in a siliceous concrete cavity at intermediate decay heat power level with a top flooding phase after a phase of dry concrete erosion. COMET-L2: Investigation of long-term melt-concrete interaction of metallic corium in a cylindrical siliceous concrete cavity under dry conditions with decay heat simulation of intermediate power during the first test phase, and subsequently at reduced power during the second test phase. (author)

  9. Validation and application of the system code ATHLET-CD for BWR severe accident analyses

    Energy Technology Data Exchange (ETDEWEB)

    Di Marcello, Valentino, E-mail: valentino.marcello@kit.edu; Imke, Uwe; Sanchez, Victor

    2016-10-15

    Highlights: • We present the application of the system code ATHLET-CD code for BWR safety analyses. • Validation of core in-vessel models is performed based on KIT CORA experiments. • A SB-LOCA scenario is simulated on a generic German BWR plant up to vessel failure. • Different core reflooding possibilities are investigated to mitigate the accident consequences. • ATHLET-CD modelling features reflect the current state of the art of severe accident codes. - Abstract: This paper is aimed at the validation and application of the system code ATHLET-CD for the simulation of severe accident phenomena in Boiling Water Reactors (BWR). The corresponding models for core degradation behaviour e.g., oxidation, melting and relocation of core structural components are validated against experimental data available from the CORA-16 and -17 bundle tests. Model weaknesses are discussed along with needs for further code improvements. With the validated ATHLET-CD code, calculations are performed to assess the code capabilities for the prediction of in-vessel late phase core behaviour and reflooding of damaged fuel rods. For this purpose, a small break LOCA scenario for a generic German BWR with postulated multiple failures of the safety systems was selected. In the analysis, accident management measures represented by cold water injection into the damaged reactor core are addressed to investigate the efficacy in avoiding or delaying the failure of the reactor pressure vessel. Results show that ATHLET-CD is applicable to the description of BWR plant behaviour with reliable physical models and numerical methods adopted for the description of key in-vessel phenomena.

  10. Overview of severe accident research at JAERI

    International Nuclear Information System (INIS)

    Sugimoto, Jun

    1999-01-01

    Severe accident research at JAERI aims at the confirmation of the safety margin, the quantification of the associated risk, and the evaluation of the effectiveness of the accident management measures of the nuclear power reactors, in accordance with the government five-year nuclear safety research program. JAERI has been conducting a wide range of severe accident research activities both in experiment and analysis, such as melt coolant interactions, fission product behaviors in coolant system, containment integrity and assessment of accident management measures. Molten core/coolant interaction and in-vessel molten coolability have been investigated in ALPHA Program. MUSE experiments in ALPHA Program has been conducted for the precise energy measurement due to steam explosion in melt jet and stratified geometries. In VEGA Program, which aims at FP release from irradiated fuels at high temperature and high pressure under various atmospheric conditions, the facility construction is almost completed. In WIND Program the revaporization of aerosols due to decay heating and also the integrity of the piping from this heat source are being investigated. Code development activities are in progress for an integrated source term analysis with THALES, fission product behaviors with ART, steam explosion with JASMINE, and in-vessel debris behaviors with CAMP. The experimental analyses and reactor application have made progress by participating international standard problem and code comparison exercises, along with the use of introduced codes, such as SCDAP/RELAP5 and MELCOR. The outcome of the severe accident research will be utilized for the evaluation of more reliable severe accident scenarios, detailed implementation of the accident management measures, and also for the future reactor development, basically through the sophisticated use of verified analytical tools. (author)

  11. Impacts of the Fukushima Daiichi Accident on Nuclear Development Policies

    International Nuclear Information System (INIS)

    Vance, Robert; Henderson, David; ); Moore, Laurie

    2017-01-01

    The Fukushima Daiichi nuclear power plant accident has had an impact on the development of nuclear power around the world. While the accident was followed by thorough technical assessments of the safety of all operating nuclear power plants, and a general increase in safety requirements has been observed worldwide, national policy responses have been more varied. These responses have ranged from countries phasing out or accelerating decisions to phase out nuclear energy to countries reducing their reliance on nuclear power or on the contrary continuing to pursue or expand their nuclear power programs. This study examines changes to policies, and plans and attempts to distinguish the impact of the Fukushima Daiichi accident from other factors that have affected policy-making in relation to nuclear energy, in particular electricity market economics, financing challenges and competition from other sources (gas, coal and renewables). It also examines changes over time to long-term, quantitative country projections, which reveal interesting trends on the possible role of nuclear energy in future energy systems. (authors)

  12. NPP Krsko Severe Accident Management Guidelines Implementation

    International Nuclear Information System (INIS)

    Basic, I.; Krajnc, B.; Bilic-Zabric, T.; Spiler, J.

    2002-01-01

    Severe Accident Management is a framework to identify and implement the Emergency Response Capabilities that can be used to prevent or mitigate severe accidents and their consequences. The USA NRC has indicated that the development of a licensee plant specific accident management program will be required in order to close out the severe accident regulatory issue (Ref. SECY-88-147). Generic Letter 88-20 ties the Accident management Program to IPE for each plant. The SECY-89-012 defines those actions taken during the course of an accident by the plant operating and technical staff to: 1) prevent core damage, 2) terminate the progress of core damage if it begins and retain the core within the reactor vessel, 3) maintain containment integrity as long as possible, and 4) minimize offsite releases. The subject of this paper is to document the severe accident management activities, which resulted in a plant specific Severe Accident Management Guidelines implementation. They have been developed based on the Krsko IPE (Individual Plant Examination) insights, Generic WOG SAMGs (Westinghouse Owners Group Severe Accident Management Guidances) and plant specific documents developed within this effort. Among the required plant specific actions the following are the most important ones: Identification and documentation of those Krsko plant specific severe accident management features (which also resulted from the IPE investigations). The development of the Krsko plant specific background documents (Severe Accident Plant Specific Strategies and SAMG Setpoint Calculation). Also, paper discusses effort done in the areas of NPP Krsko SAMG review (internal and external ), validation on Krsko Full Scope Simulator (Severe Accident sequences are simulated by MAAP4 in real time) and world 1st IAEA Review of Accident Management Programmes (RAMP). (author)

  13. Status of ANL out-of-pile investigations of severe accident phenomena for liquid metal reactors

    International Nuclear Information System (INIS)

    Spencer, B.W.; Marchaterre, J.F.; Anderson, R.P.

    1986-01-01

    Research addressing LMFBR whole core accidents has been terminated, and there is now emphasis on quantifying reactivity feedbacks, and in particular enhancing negative feedback, so that advanced LMR designs will provide inherently safe operation. The status of recent HCDA-related laboratory research performed at ANL, up to the time that such activities were no longer needed to support CRBR licensing, is described. Included are descriptions of programs addressing sodium channel voiding, fuel sweepout, fuel dispersal and plugging, boiled-up pool, UO 2 /sodium FCI, and debris coolability. Descriptions of recent investigations involving the metal fuel/sodium system are also included

  14. An Investigation of the Correlation between Safety Locus of Control and Occupational Accidents in Selected Medium-sized Manufacturing Industries in Qom Province, Iran, 2015

    Directory of Open Access Journals (Sweden)

    mohammad khandan

    2016-12-01

    Full Text Available Background and Objectives: Today, occupational accidents impose many direct and indirect costs on communities. In order to prevent the occurrence of work-related accidents, it is necessary that environmental factors be considered along with personal factors, such as safety Locus of control (SLOC. The present study aimed to investigate the correlation between safety locus of control and occupational accidents in two manufacturing companies in Qom province in 2015. Methods: This descriptive cross-sectional study was conducted on 163 workers who participated in the census. The tools used for data collection were valid questionnaire for SLOC and demographic questionnaire, and accidents were stated as self-report. Data were analyzed using t-, one-way ANOVA, and Poisson regression statistical tests. Results: Among all workers, 52.8% were female and others were male. The average age of the workers was 29.8±6.6 years. A total of 37 (22.8% workers had experienced occupational accident. Also, score of SLOC was 39.1±6.7. Among the demographic variables, there was no significant relationship between work history and number of occupational accidents (p=0.06, but there was a significant relationship between external control (one of the SLOC subscales and occupational accidents (p<0.05. Conclusion: Based on the findings, subjects who perceive positive or negative events as consequences of their own behavior, and attribute them to chance, fate, and uncontrollable environmental factors, experience more occupational accidents compared to other people. Hence, paying attention to psychological and cognitive factors in work environments should be a priority for managers and decision makers of the industry.  

  15. The Fukushima accident and its consequences. Facts, explanations and comments; L'accident de Fukushima et ses consequences. Faits, explications et commentaires

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-03-06

    This document proposes an overview of the present situation in the different reactors of the Fukushima power station and discusses its control by the operator. It also describes what went on, the causes of the accident, and what occurred on the accident day (earthquake, tsunami, flooding). It discusses whether some mistakes regarding the design and the protection of reactors could explain the accident. It presents the various measures which have been immediately implemented to protect the populations and to confine the accident. It proposes an assessment of damages for the ground and marine environment in terms of contamination. It addresses the consequences of the released radioactivity on population health and on personnel intervening within the site. It discusses the restoration perspectives for contaminated areas and the possible return of evacuated population. Then, it describes the different phases for the station dismantling. It evokes the issue of fallouts beyond Japan and in Europe, outlines some lessons learned from the accident and new safety measures to be implemented in France. It discusses how nuclear risk management is organised in France and its efficiency. It addresses the consequences for the development of nuclear energy in the world

  16. Scientific aspects of the Tohoku earthquake and Fukushima nuclear accident

    Science.gov (United States)

    Koketsu, Kazuki

    2016-04-01

    We investigated the 2011 Tohoku earthquake, the accident of the Fukushima Daiichi nuclear power plant, and assessments conducted beforehand for earthquake and tsunami potential in the Pacific offshore region of the Tohoku District. The results of our investigation show that all the assessments failed to foresee the earthquake and its related tsunami, which was the main cause of the accident. Therefore, the disaster caused by the earthquake, and the accident were scientifically unforeseeable at the time. However, for a zone neighboring the reactors, a 2008 assessment showed tsunamis higher than the plant height. As a lesson learned from the accident, companies operating nuclear power plants should be prepared using even such assessment results for neighboring zones.

  17. Interaction of radionuclides in severe accident conditions

    International Nuclear Information System (INIS)

    Nagrale, Dhanesh B.; Bera, Subrata; Deo, Anuj Kumar; Paul, U.K.; Prasad, M.; Gaikwad, A.J.

    2015-01-01

    Nuclear power plants are designed with inherent engineering safety systems and associated operational procedures that provide an in-depth defence against accidents. Radionuclides such as Iodine, Cesium, Tellurium, Barium, Strontium, Rubidium, Molybdenum and many others may get released during a severe accident. Among these, Iodine, one of the fission products, behaviour is significant for the analysis of severe accident consequences because iodine is a chemically more active to the potential components released to the environment. During severe accident, Iodine is released and transported in aqueous, organic and inorganic forms. Iodine release from fuel, iodine transport in primary coolant system, containment, and reaction with control rods are some of the important phases in a severe accident scenario. The behaviour of iodine is governed by aerosol physics, depletion mechanisms gravitational settling, diffusiophoresis and thermophoresis. The presence of gaseous organic compounds and oxidizing compounds on iodine, reactions of aerosol iodine with boron and formation of cesium iodide which results in more volatile iodine release in containment play significant roles. Water radiolysis products due to presence of dissolved impurities, chloride ions, organic impurities should be considered while calculating iodine release. Containment filtered venting system (CFVS) consists of venturi scrubber and a scrubber tank which is dosed with NaOH and NaS_2O_3 in water where iodine will react with the chemicals and convert into NaI and Na_2SO_4. This paper elaborates the issues with respect to interaction of radionuclides and its consideration in modeling of severe accident. (author)

  18. Self-reported accidents

    DEFF Research Database (Denmark)

    Møller, Katrine Meltofte; Andersen, Camilla Sloth

    2016-01-01

    The main idea behind the self-reporting of accidents is to ask people about their traffic accidents and gain knowledge on these accidents without relying on the official records kept by police and/or hospitals.......The main idea behind the self-reporting of accidents is to ask people about their traffic accidents and gain knowledge on these accidents without relying on the official records kept by police and/or hospitals....

  19. Injury severity and seating position in accidents with German EMS helicopters.

    Science.gov (United States)

    Hinkelbein, Jochen; Spelten, Oliver; Neuhaus, Christopher; Hinkelbein, Mandy; Özgür, Enver; Wetsch, Wolfgang A

    2013-10-01

    Accident rates and fatality rates for Helicopter Emergency Medical Service (HEMS) missions have been investigated recently, but none of these studies considered the influence of the seating position in the helicopter. The aim of the present descriptive and observational study was to analyze injury severity depending on the seating position during HEMS accidents in Germany. Data from the German Federal Agency for Flight Accident Investigation was gathered for a period of 40 years (from 1970 to 2009). The seating position in the aircraft during the accident and the resulting injury severity (i.e., 1=no; 2=slight; 3=severe; and 4=fatal) were recorded. Injury severity was compared using the Fisher's exact test. P values accidents were investigated (n=61 accidents did not lead to any injuries in the occupants, n=7 accidents resulted in minor, and n=6 in severe injuries, and lethal injuries resulted from n=15 accidents). The occupant in the "patient" position was most likely to suffer from deadly injuries (44.9%), followed by the HEMS crew member rear seat (25.0%), compared to lower lethality rates in the other seating positions (9.4-11.2%). Sitting on the HEMS crew member rear seat also was associated with the highest percentage of severe and minor injuries (12.5% each). In HEMS accidents, the patients' position and the HEMS crew member rear seat were found to be at the highest risk for fatal or severe injuries. These results support the urgent requirement of a large international data base for HEMS accidents as a basis for further studies to improve the safety in HEMS missions. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Causes of Accidents among Commercial Motorcyclists (Okada) in ...

    African Journals Online (AJOL)

    Motor cycle accidents have become the most serious problem threatening the entire Nigerian population. It is against this background that this study attempted to investigate the causes of accidents among commercial motorcyclists in Borno State, Nigeria. The population of the study consisted of all the commercial ...

  1. Initial medical management of criticality accident victim; Conduite a tenir aux victimes d'un accident de criticite

    Energy Technology Data Exchange (ETDEWEB)

    Miele, A; Bebaron-Jacobs, L

    2005-07-01

    The extremely severe criticality accidents known to this day, and the subsequent deaths recorded (Sarov 1997 and Tokai Mura 1999), demonstrate the need for sustained surveillance and constant adapted training for the teams in charge of irradiated and/or contaminated victims. The aim of this work group, composed of occupational health services and associated medical biology laboratories, is to present, in leaflet format, the essential data on the documentation and the conduct to be held when facing the victims of a criticality accident. The studies of this work group confirm the difficulties involved in managing this type of accident, both from the dosimetric evaluation point of view and from the therapeutic management point of view. That is why several research themes and perspectives are developed. During the different phases of victim triage, the recommendations given on these leaflets describe the operational conducts to be held. This work will have to be updated according to the evolution in knowledge and means: short and long term effects of exposure to neutrons, multi-competence hospital cooperation, expertise networks related to dosimetric reconstitution. (authors)

  2. ESR imaging investigations of two-phase systems.

    Science.gov (United States)

    Herrmann, Werner; Stösser, Reinhard; Borchert, Hans-Hubert

    2007-06-01

    The possibilities of electron spin resonance (ESR) and electron spin resonance imaging (ESRI) for investigating the properties of the spin probes TEMPO and TEMPOL in two-phase systems have been examined in the systems water/n-octanol, Miglyol/Miglyol, and Precirol/Miglyol. Phases and regions of the phase boundary could be mapped successfully by means of the isotropic hyperfine coupling constants, and, moreover, the quantification of rotational and lateral diffusion of the spin probes was possible. For the quantitative treatment of the micropolarity, a simplified empirical model was established on the basis of the Nernst distribution and the experimentally determined isotropic hyperfine coupling constants. The model does not only describe the summarized micropolarities of coexisting phases, but also the region of the phase boundary, where solvent molecules of different polarities and tendencies to form hydrogen bonds compete to interact with the NO group of the spin probe. Copyright 2007 John Wiley & Sons, Ltd.

  3. The reaction between iodine and organic coatings under severe PWR accident conditions. An experimental parameter study

    Energy Technology Data Exchange (ETDEWEB)

    Hellmann, S; Funke, F; Greger, G U; Bleier, A; Morell, W [Siemens AG, Power Generation Group, Erlangen (Germany)

    1996-12-01

    An extensive experimental parameter study was performed on the deposition and on the resuspension kinetics in the reaction system iodine/organically coated surfaces. Both reactions in the gas phase and in the liquid phase were investigated and kinetic rate constants suitable for modelling were derived. Previous experimental studies on the reaction of iodine with organic coated surfaces were mostly limited to temperatures below 100{sup o}C. Thus, this parameter study aims at filling a gap and providing kinetic data on heterogeneous reactions with organic surfaces in the accident-relevant temperature range of 100-160{sup o}C. Two types of laboratory experiments carried out at Siemens/KWU using coatings representative for German power plants (epoxy-tape paint), namely gas phase tests and liquid phase tests. (author) 6 figs., 6 tabs., 5 refs.

  4. Accident management for PWRs in France and Germany

    International Nuclear Information System (INIS)

    Heili, F.; Lecomte, C.; L'Homme, A.

    1991-11-01

    The results of risk analyses, research and particularly the two severe accidents in the nuclear power plants TMI-2 and Chernobyl let to a worldwide re-examination of all aspects dealing with the capability to cope with severe accidents. Strategies have been developed or are under development providing actions that can be taken to prevent severe accidents or to mitigate their consequences. Those strategies are investigated and discussed using the term 'accident management'. The purpose of this report is to present the respective views in France and Germany and to point out differences and commonalties of the approaches. This report also includes proposals for further work

  5. Material Selection for Accident Tolerant Fuel Cladding

    Energy Technology Data Exchange (ETDEWEB)

    Pint, Bruce A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Terrani, Kurt A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Yamamoto, Yukinori [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Snead, Lance Lewis [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-01-01

    Alternative cladding materials to Zr-based alloys are being investigated for accident tolerance, which can be defined as > 100X improvement (compared to Zr-based alloys) in oxidation resistance to steam or steam-H2 environments at ≥ 1200°C for short times. After reviewing a wide range of candidates, current steam oxidation testing is being conducted on Mo, MAX phases and FeCrAl alloys. Recently reported low mass losses for Mo in steam at 800°C could not be reproduced. Both FeCrAl and MAX phase Ti2AlC form a protective alumina scale in steam. However, commercial Ti2AlC that was not single phase, formed a much thicker oxide at 1200°C in steam and significant TiO2, and therefore Ti2AlC may be challenging to form as a cladding or a coating. Alloy development for FeCrAl is seeking to maintain its steam oxidation resistance to 1475°C, while reducing its Cr content to minimize susceptibility to irradiation-assisted α´ formation. The composition effects and critical limits to retaining protective scale formation at > 1400°C are still being evaluated.

  6. Overview of severe accident research at the USNRC

    International Nuclear Information System (INIS)

    Basu, S.; Ader, C.E.

    1999-01-01

    This paper summarizes the U.S. Nuclear Regulatory Commission's (USNRC) severe accident research activities, in particular, progress made in the past year toward the resolution and/or improved understanding of a number of severe accident issues. The direct containment heating (DCH) is nearing resolution for Combustion Engineering and Babcock and Wilcox type pressurized water reactors (PWRs) are well as for ice condensers. Additionally, two lower pressure DCH tests were conducted recently at the Sandia National Laboratories (SNL) under the NRC/IPSN/FzK sponsorship to provide data regarding intentional depressurization as an accident management strategy to mitigate DCH loads. In the area of lower head integrity, the experimental program to investigate boiling heat transfer on downward facing curved surfaces with insulation was completed. Finally, the SNL program investigating the creep rupture behavior of the lower head under the combined thermo-mechanical loading was completed recently. Additional lower head experiments at SNL are being planned as an OECD project. During the past year, the USNRC participated in two programs aimed at extending the data base on hydrogen combustion into more prototypic situations. Testing was performed at the Brookhaven National Laboratory (BNL) to investigate detonation transmission at elevated temperatures. In a cooperative program under the sponsorship of NRC/IPSN/FzK, Russian Research Center (RRC) investigated hydrogen combustion issues at large scale at the RUT facility. The experimental program at the SNL to examine the performance of Passive Autocatalytic Recombiners (PARs) was completed also this year. In the fuel-coolant interaction (FCI) area, the experimental work at the Argonne National Laboratory (ANL) to investigate chemical augmentation of FCI energetics was completed as was the experimental work at the University of Wisconsin (UW) involving one-dimensional propagation experiments (similar to KROTOS). The USNRC is

  7. A study of maintenance-related major accident cases in the 21st century

    OpenAIRE

    Okoh, Peter; Haugen, Stein

    2014-01-01

    This paper is based on a review of 183 detailed, major accident investigation and analysis reports related to the handling, processing and storage of hydrocarbons and hazardous chemicals over a decade from 2000 to 2011. The reports cover technical, human and organizational factors. In this paper, the Work and Accident Process (WAP) classification scheme is applied to the accident reports with the intention of investigating to what extent maintenance has been a cause of major accidents and wha...

  8. Indicators of Indiscipline. Phase 2

    National Research Council Canada - National Science Library

    Owens, S

    1991-01-01

    .... Phase 2 research was conducted to determine which of the indicators identified by the phase 1 study could successfully identify soldiers who cause accidents due to indiscipline and to field test...

  9. Investigation of relationship between mental workload and information flow rate of accident diagnosis tasks in NPPs

    International Nuclear Information System (INIS)

    Ha, Chang Hoon

    2005-02-01

    The objective of this study is to investigate experimentally the relationship between an operator's mental workload and the information flow rate of accident diagnosis tasks and further to propose the information flow rate as an analytic method for measuring the mental workload. There are two types of mental workload in the advanced MCR of NPPs: the information processing workload, which is the processing that the human operator must actually perform in order to complete the diagnosis task, and emotional stress workload experienced by the operator. In this study, the focus is on the former. Three kinds of methods are used to measure the operator's workload: information flow rate, subjective methods, and physiological measures. Information flows for eight accident diagnosis tasks are modeled qualitatively using a stage model and are quantified using Conant's model. The eight accident cases are considered here are: Loss Of Coolant Accident (LOCA), Steam Generator Tube Rupture (SGTR), Steam Line Break (SLB), Feedwater Line Break (FLB), Pressurizer (PZR) spray and heater failure, Reactor Coolant Pump (RCP) trip, Main Steam Isolation Valve (MSIV) failure, and PZR spray failure. The information flow rate is obtained for each diagnosis task by imposing time limit restrictions for the tasks. Subjective methods require the operators to respond to questionnaires to rate their level of mental effort. NASA-TLX and MCH scale are selected as subjective methods. NASA-TLX is a subjective method used in the various fields including the aviation, automobile, and nuclear industries. It has a multi-dimensional rating technique and provides an overall workload score based on a weighted average on six subscales using pair-wise comparison tests. MCH, on the other hand, is one-dimensional and uses a 10- point rating technique. As with NASA-TLX, the higher the score is, the higher the subjective workload is. For the physiological measurements, an eye tracking system analyzes eye movements

  10. Major Accidents (Gray Swans) Likelihood Modeling Using Accident Precursors and Approximate Reasoning.

    Science.gov (United States)

    Khakzad, Nima; Khan, Faisal; Amyotte, Paul

    2015-07-01

    Compared to the remarkable progress in risk analysis of normal accidents, the risk analysis of major accidents has not been so well-established, partly due to the complexity of such accidents and partly due to low probabilities involved. The issue of low probabilities normally arises from the scarcity of major accidents' relevant data since such accidents are few and far between. In this work, knowing that major accidents are frequently preceded by accident precursors, a novel precursor-based methodology has been developed for likelihood modeling of major accidents in critical infrastructures based on a unique combination of accident precursor data, information theory, and approximate reasoning. For this purpose, we have introduced an innovative application of information analysis to identify the most informative near accident of a major accident. The observed data of the near accident were then used to establish predictive scenarios to foresee the occurrence of the major accident. We verified the methodology using offshore blowouts in the Gulf of Mexico, and then demonstrated its application to dam breaches in the United Sates. © 2015 Society for Risk Analysis.

  11. Domino effect in chemical accidents: main features and accident sequences.

    Science.gov (United States)

    Darbra, R M; Palacios, Adriana; Casal, Joaquim

    2010-11-15

    The main features of domino accidents in process/storage plants and in the transportation of hazardous materials were studied through an analysis of 225 accidents involving this effect. Data on these accidents, which occurred after 1961, were taken from several sources. Aspects analyzed included the accident scenario, the type of accident, the materials involved, the causes and consequences and the most common accident sequences. The analysis showed that the most frequent causes are external events (31%) and mechanical failure (29%). Storage areas (35%) and process plants (28%) are by far the most common settings for domino accidents. Eighty-nine per cent of the accidents involved flammable materials, the most frequent of which was LPG. The domino effect sequences were analyzed using relative probability event trees. The most frequent sequences were explosion→fire (27.6%), fire→explosion (27.5%) and fire→fire (17.8%). Copyright © 2010 Elsevier B.V. All rights reserved.

  12. Thermodynamic evaluation of the solidification phase of molten core–concrete under estimated Fukushima Daiichi nuclear power plant accident conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kitagaki, Toru, E-mail: kitagaki.toru@jaea.go.jp; Yano, Kimihiko; Ogino, Hideki; Washiya, Tadahiro

    2017-04-01

    The solidification phases of molten core–concrete under the estimated molten core–concrete interaction (MCCI) conditions in the Fukushima Daiichi Nuclear Power Plant Unit 1 were predicted using the thermodynamic equilibrium calculation tool, FactSage 6.2, and the NUCLEA database in order to contribute toward the 1F decommissioning work and to understand the accident progression via the analytical results for the 1F MCCI products. We showed that most of the U and Zr in the molten core–concrete forms (U,Zr)O{sub 2} and (Zr,U)SiO{sub 4}, and the formation of other phases with these elements is limited. However, the formation of (Zr,U)SiO{sub 4} requires a relatively long time because it involves a change in the crystal structure from fcc-(U,Zr)O{sub 2} to tet-(U,Zr)O{sub 2}, followed by the formation of (Zr,U)SiO{sub 4} by reaction with SiO{sub 2}. Therefore, the formation of (Zr,U)SiO{sub 4} is limited under quenching conditions. Other common phases are the oxide phases, CaAl{sub 2}Si{sub 2}O{sub 8}, SiO{sub 2}, and CaSiO{sub 3}, and the metallic phases of the Fe–Si and Fe–Ni alloys. The solidification phenomenon of the crust under quenching conditions and that of the molten pool under thermodynamic equilibrium conditions in the 1F MCCI progression are discussed.

  13. Accident information needs

    International Nuclear Information System (INIS)

    Hanson, D.J.; Arcieri, W.C.; Ward, L.W.

    1992-01-01

    A Five-step methodology has been developed to evaluate information needs for nuclear power plants under accident conditions and the availability of plant instrumentation during severe accidents. Step 1 examines the credible accidents and their relationships to plant safety functions. Step 2 determines the information personnel involved in accident management will need to understand plant behavior. Step 3 determines the capability of the instrumentation to function properly under severe accident conditions. Step 4 determines the conditions expected during the identified severe accidents. Step 5 compares the instrument capabilities and the severe accident conditions to evaluate the availability of the instrumentation to supply needed plant information

  14. Accident information needs

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, D.J.; Arcieri, W.C.; Ward, L.W.

    1992-12-31

    A Five-step methodology has been developed to evaluate information needs for nuclear power plants under accident conditions and the availability of plant instrumentation during severe accidents. Step 1 examines the credible accidents and their relationships to plant safety functions. Step 2 determines the information personnel involved in accident management will need to understand plant behavior. Step 3 determines the capability of the instrumentation to function properly under severe accident conditions. Step 4 determines the conditions expected during the identified severe accidents. Step 5 compares the instrument capabilities and the severe accident conditions to evaluate the availability of the instrumentation to supply needed plant information.

  15. Accident information needs

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, D.J.; Arcieri, W.C.; Ward, L.W.

    1992-01-01

    A Five-step methodology has been developed to evaluate information needs for nuclear power plants under accident conditions and the availability of plant instrumentation during severe accidents. Step 1 examines the credible accidents and their relationships to plant safety functions. Step 2 determines the information personnel involved in accident management will need to understand plant behavior. Step 3 determines the capability of the instrumentation to function properly under severe accident conditions. Step 4 determines the conditions expected during the identified severe accidents. Step 5 compares the instrument capabilities and the severe accident conditions to evaluate the availability of the instrumentation to supply needed plant information.

  16. Investigation regarding the long-term security developments in the Swedish nuclear power and the response to the accident at Fukushima

    International Nuclear Information System (INIS)

    Skaanberg, Lars

    2012-01-01

    Swedish nuclear plants need to continue to work on analysis and actions in the plants, partly to meet the demands of legislation and agreed action plans, and partly due to additional security requirements on account of experiences from the Fukushima Dai-ichi accident, stress tests, security investigations and investigations relating to physical protection. It is also essential to continue with safety improvements to gradually increase margins against unforeseen events in aging plants during long-term operation

  17. Learning lessons from Natech accidents - the eNATECH accident database

    Science.gov (United States)

    Krausmann, Elisabeth; Girgin, Serkan

    2016-04-01

    When natural hazards impact industrial facilities that house or process hazardous materials, fires, explosions and toxic releases can occur. This type of accident is commonly referred to as Natech accident. In order to prevent the recurrence of accidents or to better mitigate their consequences, lessons-learned type studies using available accident data are usually carried out. Through post-accident analysis, conclusions can be drawn on the most common damage and failure modes and hazmat release paths, particularly vulnerable storage and process equipment, and the hazardous materials most commonly involved in these types of accidents. These analyses also lend themselves to identifying technical and organisational risk-reduction measures that require improvement or are missing. Industrial accident databases are commonly used for retrieving sets of Natech accident case histories for further analysis. These databases contain accident data from the open literature, government authorities or in-company sources. The quality of reported information is not uniform and exhibits different levels of detail and accuracy. This is due to the difficulty of finding qualified information sources, especially in situations where accident reporting by the industry or by authorities is not compulsory, e.g. when spill quantities are below the reporting threshold. Data collection has then to rely on voluntary record keeping often by non-experts. The level of detail is particularly non-uniform for Natech accident data depending on whether the consequences of the Natech event were major or minor, and whether comprehensive information was available for reporting. In addition to the reporting bias towards high-consequence events, industrial accident databases frequently lack information on the severity of the triggering natural hazard, as well as on failure modes that led to the hazmat release. This makes it difficult to reconstruct the dynamics of the accident and renders the development of

  18. Source terms for analysis of accidents at a high level waste repository

    International Nuclear Information System (INIS)

    Mubayi, V.; Davis, R.E.; Youngblood, R.

    1989-01-01

    This paper describes an approach to identifying source terms from possible accidents during the preclosure phase of a high-level nuclear waste repository. A review of the literature on repository safety analyses indicated that source term estimation is in a preliminary stage, largely based on judgement-based scoping analyses. The approach developed here was to partition the accident space into domains defined by certain threshold values of temperature and impact energy density which may arise in potential accidents and specify release fractions of various radionuclides, present in the waste form, in each domain. Along with a more quantitative understanding of accident phenomenology, this approach should help in achieving a clearer perspective on scenarios important to preclosure safety assessments of geologic repositories. 18 refs., 3 tabs

  19. ADAM: An Accident Diagnostic,Analysis and Management System - Applications to Severe Accident Simulation and Management

    International Nuclear Information System (INIS)

    Zavisca, M.J.; Khatib-Rahbar, M.; Esmaili, H.; Schulz, R.

    2002-01-01

    The Accident Diagnostic, Analysis and Management (ADAM) computer code has been developed as a tool for on-line applications to accident diagnostics, simulation, management and training. ADAM's severe accident simulation capabilities incorporate a balance of mechanistic, phenomenologically based models with simple parametric approaches for elements including (but not limited to) thermal hydraulics; heat transfer; fuel heatup, meltdown, and relocation; fission product release and transport; combustible gas generation and combustion; and core-concrete interaction. The overall model is defined by a relatively coarse spatial nodalization of the reactor coolant and containment systems and is advanced explicitly in time. The result is to enable much faster than real time (i.e., 100 to 1000 times faster than real time on a personal computer) applications to on-line investigations and/or accident management training. Other features of the simulation module include provision for activation of water injection, including the Engineered Safety Features, as well as other mechanisms for the assessment of accident management and recovery strategies and the evaluation of PSA success criteria. The accident diagnostics module of ADAM uses on-line access to selected plant parameters (as measured by plant sensors) to compute the thermodynamic state of the plant, and to predict various margins to safety (e.g., times to pressure vessel saturation and steam generator dryout). Rule-based logic is employed to classify the measured data as belonging to one of a number of likely scenarios based on symptoms, and a number of 'alarms' are generated to signal the state of the reactor and containment. This paper will address the features and limitations of ADAM with particular focus on accident simulation and management. (authors)

  20. Benchmarking Severe Accident Computer Codes for Heavy Water Reactor Applications

    International Nuclear Information System (INIS)

    2013-12-01

    Requests for severe accident investigations and assurance of mitigation measures have increased for operating nuclear power plants and the design of advanced nuclear power plants. Severe accident analysis investigations necessitate the analysis of the very complex physical phenomena that occur sequentially during various stages of accident progression. Computer codes are essential tools for understanding how the reactor and its containment might respond under severe accident conditions. The IAEA organizes coordinated research projects (CRPs) to facilitate technology development through international collaboration among Member States. The CRP on Benchmarking Severe Accident Computer Codes for HWR Applications was planned on the advice and with the support of the IAEA Nuclear Energy Department's Technical Working Group on Advanced Technologies for HWRs (the TWG-HWR). This publication summarizes the results from the CRP participants. The CRP promoted international collaboration among Member States to improve the phenomenological understanding of severe core damage accidents and the capability to analyse them. The CRP scope included the identification and selection of a severe accident sequence, selection of appropriate geometrical and boundary conditions, conduct of benchmark analyses, comparison of the results of all code outputs, evaluation of the capabilities of computer codes to predict important severe accident phenomena, and the proposal of necessary code improvements and/or new experiments to reduce uncertainties. Seven institutes from five countries with HWRs participated in this CRP

  1. Introduction of Bayesian network in risk analysis of maritime accidents in Bangladesh

    Science.gov (United States)

    Rahman, Sohanur

    2017-12-01

    Due to the unique geographic location, complex navigation environment and intense vessel traffic, a considerable number of maritime accidents occurred in Bangladesh which caused serious loss of life, property and environmental contamination. Based on the historical data of maritime accidents from 1981 to 2015, which has been collected from Department of Shipping (DOS) and Bangladesh Inland Water Transport Authority (BIWTA), this paper conducted a risk analysis of maritime accidents by applying Bayesian network. In order to conduct this study, a Bayesian network model has been developed to find out the relation among parameters and the probability of them which affect accidents based on the accident investigation report of Bangladesh. Furthermore, number of accidents in different categories has also been investigated in this paper. Finally, some viable recommendations have been proposed in order to ensure greater safety of inland vessels in Bangladesh.

  2. Parametric study of recriticality in a boiling water reactor severe accident

    International Nuclear Information System (INIS)

    Shamoun, B.I.; Witt, R.J.

    1994-01-01

    Recriticality is possible in a severe accident if unborated or low boron concentration water is added to a damaged core after control rod melting but before fuel melting. Recriticality in a severe accident in a boiling water reactor was parametrically investigated using the TWODANT code. Eigenvalue calculations for a unit central fuel cell with reflective boundary conditions were performed by solving the two-dimensional multigroup steady-state Boltzman transport equation using TWODANT. Two sets of calculations were performed in this work. The first set of calculations was carried out under three types of normal operating conditions to provide reference values for the accident calculations: (a) cold rodded condition, (b) cold unrodded condition, and (c) hot full-power condition. The eigenvalues at these conditions were found to be 1.055, 1.208, and 1.098, respectively. The second set of calculations was carried out after the melting of the control element and during the reflood phase, under the following reflood conditions: (a) reflood with unborated water and (b) reflood with borated water. For the reflood case with unborated water, five values of void fractions were considered (100, 60, 40, 20, and 0%). Decreasing void fractions represent greater refill levels during the reflood process. The system pressure was taken to be 7 MPa, while the moderator temperature was set to 560 K. Plotting the eigenvalue compared with the fraction of control materials lost indicates recriticality is only possible if nearly 100% of the control material is lost from the core. Eigenvalue calculations were repeated for short- and long-term recovery conditions of the reflood phase corresponding to maximum moderator density at 4 MPa pressure and 525 K moderator temperature and for 1 MPa pressure and 325 K moderator temperature, respectively. Recriticality was again observed to be a concern only after losing 95% ore more of control materials from the unit cell

  3. Radiation accidents and defence of population

    International Nuclear Information System (INIS)

    Memmedov, A.M.

    2002-01-01

    ), don't pollute the industry environ and surroundings, don't do real danger of reirradiation and pollution but demand investigation of their origin; accidents as a result when personal and persons from population have gotten a doze of outward irradiation (over PN); accidents as a result when industry or surroundings have been polluted (over PN);.accidents, as a result of outward and inside irradiation of personal, persons from population (over NPP-norms of radiation safety). Volume and character of measures by foregoing radiation accidents and their consequence depend on groups and scale of accident. They include investigation of the accident reasons; realization the radiation control for estimation degree of ionizing radiation pressure to personal and individual persons from population; rendering medical help to victims; definition of surroundings pollution level; equipment, industrial and habitable places; prevention of further influence of ionizing radiation to population and spreading radionuclides in surroundings; elimination of disrepairs and liquidation of radiation accident source. Radiation accident in the nuclear engineering establishments and industry have been divided into accident and proper-crash. At present international organizations have divided a school of crashes and accidents at NPP. According to that scale 3 levels of accidents and 4 levels of crashes have been chosen. The accidents have been qualified: insignificant (1 level), middle difficulty (2 level), serious (3 level), but crashes - within the NPP (4 level), at the risk of surroundings (5 level), difficult (6 level), global (7 level). Character, volume and forms of measures by defence of population in the crashes at NPP depend on both the level of crash and the concrete radiation situation and stage of crash development. Those measures include: notification about crash; rendering medical help to victims, primary measures of personal and population defence (cover, iodine precautions

  4. One-phase and two-phase homologous curves for coolant pumps of the pressurized light water nuclear reactors

    International Nuclear Information System (INIS)

    Santos, G.A. dos.

    1990-01-01

    The two-phase coolant pump model of pressurized light water nuclear reactors is an important point for the loss of primary coolant accident analysis. The single-phase pump characteristics are an essential feature for operational transients studies, for example, the shut-down and start-up of pump. These parameters, in terms of the homologous curves, set up the complete performance of the pump and are input for transients and accidents analysis thermal-hydraulic codes. This work propose a mathematical model able to predict the single-phase and two-phase homologous curves where it was incorporated geometric and operational pump condition. The results were compared with the experimental tests data from literature and it has showed a good agreement. (author)

  5. Analysis of simulation results of damaged nuclear fuel accidents at NPPs with shell-type nuclear reactors

    Directory of Open Access Journals (Sweden)

    Igor L. Kozlov

    2015-03-01

    Full Text Available Lessons from the accident at the Fukushima Daiichi NPP made it necessary to reevaluate and intensificate the work on modeling and analyzing various scenarios of severe accidents with damage to the nuclear fuel in the reactor, containment and spent nuclear fuel storage pool with the expansion of the primary initiating event causes group listing. Further development of computational tools for modeling the explosion prevention criteria as to steam and gas mixtures, considering the specific thermal-hydrodynamic conditions and mechanisms of explosive situations arrival at different stages of a severe accident development, is substantiated. Based on the analysis of the known shell-type nuclear reactors accidents results the explosion safety thermodynamic criteria are presented, the parameters defining the steam and gas explosions conditions are found, the need to perform the further verification and validation of deterministic codes serving to simulate general accident processes behavior as well as phase-to-phase interaction calculated dependencies is established. The main parameters controlling and defining the criteria explosion safety effective regulation areas and their optimization conditions are found.

  6. Comparative analysis of station blackout accident progression in typical PWR, BWR, and PHWR

    International Nuclear Information System (INIS)

    Park, Soo Young; Ahn, Kwang Il

    2012-01-01

    Since the crisis at the Fukushima plants, severe accident progression during a station blackout accident in nuclear power plants is recognized as a very important area for accident management and emergency planning. The purpose of this study is to investigate the comparative characteristics of anticipated severe accident progression among the three typical types of nuclear reactors. A station blackout scenario, where all off-site power is lost and the diesel generators fail, is simulated as an initiating event of a severe accident sequence. In this study a comparative analysis was performed for typical pressurized water reactor (PWR), boiling water reactor (BWR), and pressurized heavy water reactor (PHWR). The study includes the summarization of design differences that would impact severe accident progressions, thermal hydraulic/severe accident phenomenological analysis during a station blackout initiated-severe accident; and an investigation of the core damage process, both within the reactor vessel before it fails and in the containment afterwards, and the resultant impact on the containment.

  7. Market penetration of intersection AEB: Characterizing avoided and residual straight crossing path accidents.

    Science.gov (United States)

    Sander, Ulrich; Lubbe, Nils

    2018-06-01

    Car occupants account for one third of all junction fatalities in the European Union. Driver warning can reduce intersection accidents by up to 50 percent; adding Autonomous Emergency Braking (AEB) delivers a reduction of up to 70 percent. However, these findings are based on an assumed 100 percent equipment rate, which may take decades to achieve. Our study investigates the relationship between intersection AEB market penetration rates and avoidance of accidents and injuries in order to guide implementation strategies. Additionally, residual accident characteristics (impact configurations and severity) are analyzed to provide a basis for future in-crash protection requirements. We determined which accidents would have been avoided through the use of an Intersection AEB system with different sensor field-of-views (180° and 120°) by means of re-simulating the pre-crash phase of 792 straight crossing path (SCP) car-to-car accidents recorded in the German In-Depth Accident Study (GIDAS) and the associated Pre-Crash Matrix (PCM). Intersection AEB was activated when neither of the conflict opponents could avoid the crash through reasonable braking or steering reactions. For not-avoided accidents, we used the Kudlich-Slibar rigid body impulse model to calculate the change of velocity during the impact as a measure of impact severity and the principal direction of force. Accident avoidance over market penetration is not linear but exponential, with higher gains at low penetration rates and lower gains at higher rates. A wide field-of-view sensor (180°) substantially increased accident avoidance and injury mitigation rates compared to a 120° field-of-view sensor. For a 180° field-of-view sensor at 100 percent market penetration, about 80 percent of the accidents and 90 percent of the MAIS2 + F injuries could be avoided. For the remaining accidents, AEB intervention rarely affected side of impact. The median change of velocity (delta-V) of the remaining crashes

  8. JCO criticality accident as POST-LOCA: Poor structure induced loss of organizational control accident

    International Nuclear Information System (INIS)

    Furuhama, Yutaka

    2000-01-01

    Some problems in operation and business management of JCO (Japan Nuclear Fuel Conversion Co.) have been studied as background factors of the criticality accident. Open information about business conditions of JCO suggests that the cause of the accident is not so simple as to be attributed only to economic pressure, but includes immanent problems in JCO. We investigate the problems from five viewpoints, organization of safety management, system of operation management, activities for business improvement, risk awareness, and restructuring of business, and discuss the effects and causality of background factors as well as remedies for them. (author)

  9. Impact of the TMI accident on the French nuclear program and the safety analysis

    International Nuclear Information System (INIS)

    Fourest, B.; Boaretto, Y.; Cayol, A.; Droulers, Y.; Goudal, M.; Oury, J.M.

    1980-04-01

    Almost immediately after the TMI accident, Electricite de France (EdF), Framatome and the French safety authorities started a large scale program of actions designed to analyse and understand the causes of the accident, and draw lessons applicable in France. This paper discusses these actions and the main conclusions of TMI accident analysis in France, notably: the fundamental role of plant operators, and the importance of operator training, written instructions and procedures, and diagnostic aids; the importance of feeding back operating experience to design teams, and incorporating the results of accident and post-accident studies in operating procedures; the necessity to improve knowledge of core cooling modes, including during two-phase flow and natural circulation; measures to improve particular systems and components [fr

  10. Analysis of Fukushima Daiichi Accident Using HFACS

    International Nuclear Information System (INIS)

    Mohamed, Saeed Almheiri

    2013-01-01

    The shadow of Fukushima Daiichi nuclear power plant (NPP) accident is still too big and will last long. On the other hand, it could still teach us lots of lessons to better design and operate nuclear power plants. In this paper, we will be focusing on the Fukushima Daiichi accident, especially on human organizational factors. We will analyze the accident using Human Factors Analysis and Classification System (HFACS) in order to better understand the organizational climate of TEPCO 1 and NISA 2 that led to Fukushima Daiichi Accident. HFACS was developed for the U. S. aviation industry and has been used at many industries like the rail and mining industries. We found that the HFACS to be greatly beneficial in investigating the latent and organizational causes for the accident. The application results show that the causes of Fukushima Daiichi accident were spread out from sharp end (i.e. Unsafe Act) to blunt end (i. e. Organizational Influences). This means that the corresponding countermeasures should cover from front line staff to management. Thus, we managed to develop a better understanding on how to prevent similar errors or violations. The incident and near-miss have a lot of helpful information because it may show the actual and latent deficiencies of complex systems. We applied the HFACS into Fukushima Daiichi accident to better locate the causes related to both sharp and blunt ends of operation of NPP. In order to derive useful lessons from the accident analysis, the analyst should try to find the similarities not differences from the incident. It is imperative that whatever accident/incident analysis systems we use, we should fully utilize the disastrous Fukushima accident

  11. Analysis of Fukushima Daiichi Accident Using HFACS

    Energy Technology Data Exchange (ETDEWEB)

    Mohamed, Saeed Almheiri [Korea Advanced Institue of Science and Technology, Daejeon (Korea, Republic of)

    2013-10-15

    The shadow of Fukushima Daiichi nuclear power plant (NPP) accident is still too big and will last long. On the other hand, it could still teach us lots of lessons to better design and operate nuclear power plants. In this paper, we will be focusing on the Fukushima Daiichi accident, especially on human organizational factors. We will analyze the accident using Human Factors Analysis and Classification System (HFACS) in order to better understand the organizational climate of TEPCO{sup 1} and NISA{sup 2} that led to Fukushima Daiichi Accident. HFACS was developed for the U. S. aviation industry and has been used at many industries like the rail and mining industries. We found that the HFACS to be greatly beneficial in investigating the latent and organizational causes for the accident. The application results show that the causes of Fukushima Daiichi accident were spread out from sharp end (i.e. Unsafe Act) to blunt end (i. e. Organizational Influences). This means that the corresponding countermeasures should cover from front line staff to management. Thus, we managed to develop a better understanding on how to prevent similar errors or violations. The incident and near-miss have a lot of helpful information because it may show the actual and latent deficiencies of complex systems. We applied the HFACS into Fukushima Daiichi accident to better locate the causes related to both sharp and blunt ends of operation of NPP. In order to derive useful lessons from the accident analysis, the analyst should try to find the similarities not differences from the incident. It is imperative that whatever accident/incident analysis systems we use, we should fully utilize the disastrous Fukushima accident.

  12. Initial medical management of criticality accident victim; Conduite a tenir aux victimes d'un accident de criticite

    Energy Technology Data Exchange (ETDEWEB)

    Miele, A.; Bebaron-Jacobs, L

    2005-07-01

    The extremely severe criticality accidents known to this day, and the subsequent deaths recorded (Sarov 1997 and Tokai Mura 1999), demonstrate the need for sustained surveillance and constant adapted training for the teams in charge of irradiated and/or contaminated victims. The aim of this work group, composed of occupational health services and associated medical biology laboratories, is to present, in leaflet format, the essential data on the documentation and the conduct to be held when facing the victims of a criticality accident. The studies of this work group confirm the difficulties involved in managing this type of accident, both from the dosimetric evaluation point of view and from the therapeutic management point of view. That is why several research themes and perspectives are developed. During the different phases of victim triage, the recommendations given on these leaflets describe the operational conducts to be held. This work will have to be updated according to the evolution in knowledge and means: short and long term effects of exposure to neutrons, multi-competence hospital cooperation, expertise networks related to dosimetric reconstitution. (authors)

  13. Causal Analysis to a Subway Accident: A Comparison of STAMP and RAIB

    Directory of Open Access Journals (Sweden)

    Zhou Yao

    2018-01-01

    Full Text Available Accident investigation and analysis after the accident, vital to prevent the occurrence of similar accident and improve the safety of the system. Different methods led to a different understanding of the accident. In this paper, a subway accident was analysed with a systemic accident analysis model – STAMP (System-Theoretic Accident Modelling and Processes. The hierarchical safety control structure was obtained, and the system-level safety constraints were obtained, controllers of the physical layer were analysed one by one, and put forward the relevant safety requirements and constraints, the dynamic analysis of the structure of the safety control is carried out, and the targeted recommendations are pointed out. In comparison with the analysis results obtained by the Rail Accident Investigation Branch (RAIB. Some useful findings have been concluded. STAMP treats safety as a control problem and reduces or eliminates causes of the accident from the controlling perspective. Whereas RAIB obtains causes of the accident by analysing the sequence of events related to the accident and reasons of these events, then chooses one(or moreevent(s as the immediate cause and some of the key events as causal factors. RAIB analysis is based on the sequential event models, but STAMP analysis provides us with a holistic, dynamic way to control system to maintain safety.

  14. Effects of Car Accidents on Three-Lane Traffic Flow

    Directory of Open Access Journals (Sweden)

    Jianzhong Chen

    2014-01-01

    Full Text Available A three-lane traffic flow model is proposed to investigate the effect of car accidents on the traffic flow. The model is an extension of the full velocity difference (FVD model by taking into account the lane changing. The extended lane-changing rules are presented to model the lane-changing behaviour. The cases that the car accidents occupy the exterior or interior lane, the medium lane, and two lanes are studied by numerical simulations. The time-space diagrams and the current diagrams are presented, and the traffic jams are investigated. The results show that the car accident has a different effect on the traffic flow when it occupies different lanes. The car accidents have a more serious effect on the whole road when they occupy two lanes. The larger the density is, the greater the influence on the traffic flow becomes.

  15. Dosimetric management during a criticality accident

    International Nuclear Information System (INIS)

    Lebaron-Jacobs, L.; Fottorino, R.; Racine, Y.; Miele, A.; Barbry, F.; Briot, F.; Distinguin, S.; Le Goff, J.P.; Berard, P.; Boisson, P.; Cavadore, D.; Lecoix, G.; Persico, M.H.; Rongier, E.; Challeton-De Vathaire, C.; Medioni, R.; Voisin, P.; Exmelin, L.; Flury-Herard, A.; Gaillard-Lecanu, E.; Lemaire, G.; Gonin, M.; Riasse, C.

    2008-01-01

    A working group from health occupational and clinical biochemistry services on French sites has issued essential data sheets on the guidelines to follow in managing the victims of a criticality accident. Since the priority of the medical management after a criticality accident is to assess the dose and the distribution of dose, some dosimetric investigations have been selected in order to provide a prompt response and to anticipate the final dose reconstruction. Comparison exercises between clinical biochemistry laboratories on French sites were carried out to confirm that each laboratory maintained the required operational methods for hair treatment and the appropriate equipment for 32 P activity in hair and 24 Na activity in blood measurements, and to demonstrate its ability to rapidly provide neutron dose estimates after a criticality accident. As a result, a relation has been assessed to estimate the dose and the distribution of dose according to the neutron spectrum following a criticality accident. (authors)

  16. Group unified accident reporting database (GUARD)

    International Nuclear Information System (INIS)

    Koene, W.; Waterfall, K.W.

    1991-01-01

    Significant advances have been made in recent years in enhancing the standard of safety within Shell Companies, such that safety has now been raised to a status equal to other primary business objectives. It is widely accepted that accident prevention is part of good business practice, and that a safe operation is normally an efficient operation. Safety programmes are being widely implemented which involve all employees from top management right down to the workforce including the contract staff, and the benefits are being realized. The effectiveness of any safety programme, however, must be continuously monitored, and in this respect injury and accident statistics play an important role as a prime indicator of safety performance. Statistics form part of the safety management process indicating the success of the safety programmes being implemented, and highlighting areas of weakness. Statistical information relating to the number and frequency of accidents, significant as it is, tells us little about how the accidents occur, or about how to improve the intrinsic safety of the operations. More detailed information on accident causes and lessons derived from the investigation of non-injurious accidents and near-misses is required for this, and for the setting of appropriate remedial actions. This paper concentrates on the feedback from accidents which have already occurred. This feedback plays a vital role as an indicator of safety performance upon which to judge the effectiveness of safety programmes, and also to provide important information relating to the immediate and underlying causes of accidents. To meet these requirements, however, a system for recording analyzing and communicating safety data is essential

  17. HOW TO SECURE BASIC EVIDENCE AFTER AN AVIATION ACCIDENT

    Directory of Open Access Journals (Sweden)

    Robert KONIECZKA

    2017-03-01

    Full Text Available This article attempts to provide a synthesis of basic directions indispensable to accurately collecting evidence after an aviation accident. The proper collection procedure ensures the avoidance of the loss of evidence critical for an investigation carried out by law enforcement agencies and/or the criminal justice system, which includes the participation of aviation expert investigators. Proper and complete evidence is also used to define the cause of the accident in the proceedings conducted by Państwowa Komisja Badania Wypadków Lotniczych (State Committee for Aviation Incidents Investigation, The State Committee for Aviation Incidents Investigation, hereafter referred to as the PKBWL. The methodology of securing evidence refers to the evidence collected at the scene of an accident right after its occurrence, and also to the evidence collected at other sites. It also includes, within its scope, additional materials that are essential to furthering the investigation process, although their collection does not require any urgent action. Furthermore, the article explains the meaning of particular pieces of evidence and their possible relevance to the investigation process.

  18. JAERI's activities in JCO accident

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    The Japan Atomic Energy Research Institute (JAERI) was actively involved in a variety of technical supports and cooperative activities, such as advice on terminating the criticality condition, contamination checks of the residents and consultation services for the residents, as emergency response actions to the criticality accident at the uranium processing facility operated by the JCO Co. Ltd., which occurred on September 30, 1999. These activities were carried out in collaborative ways by the JAERI staff from the Tokai Research Establishment, Naka Fusion Research Establishment, Oarai Research Establishment, and Headquarter Office in Tokyo. As well, the JAERI was engaged in the post-accident activities such as identification of accident causes, analyses of the criticality accident, and dose assessment of exposed residents, to support the Headquarter for Accident Countermeasures of the Science and Technology Agency (STA), the Accident Investigation Committee and the Health Control Committee of the Nuclear Safety Commission of Japan (NSC). This report compiles the activities, that the JAERI has conducted to date, including the discussions on measures for terminating the criticality condition, evaluation of the fission number, radiation monitoring in the environment, dose assessment, analyses of criticality dynamics. (author)

  19. Stocks and energy shocks : the impact of energy accidents on stock market value

    NARCIS (Netherlands)

    Scholtens, B.; Boersen, A.

    We investigate how financial market participants value energy accidents. We employ an event study to look into the response of stock markets to 209 accidents. These accidents were derived from Sovacool's (2008) database on major energy accidents from 1907 to 2007. It appears that the stock market in

  20. Investigating Prevalence of deaths from Traffic Accidents and Factors Associated with it in Yazd in 2009

    Directory of Open Access Journals (Sweden)

    Gh Soltani

    2014-02-01

    Conclusion: This study findings provide useful information for setting priorities in order to prevent the traffic accidents injuries. In addition, appropriate intervention programs are necessary in order to prevent traffic accidents and their complications, as well as to minimize injuries in accordance with other relevant organizations.

  1. Chernobyl accident. Exposures and effects

    International Nuclear Information System (INIS)

    Bennett, B.; Bouville, A.; Hall, P.; Savkin, M.; Storm, H.

    2000-01-01

    from the disintegration of the former Soviet Union. The United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) has given particular attention to the accident. Estimates of average doses in separate regions of countries and for the population of the northern hemisphere as a whole were presented in Annex D of the UNSCEAR 1988 Report. The experience gained in treating the immediate radiation injuries of workers and fire fighters involved in controlling the accident were also reviewed in the UNSCEAR 1988 Report (Annex G). The UNSCEAR Committee is currently involved in the final phase of preparation of a further assessment of the exposures and effects of the accident. During the last several years, considerable attention has been devoted to investigating possible associations between health effects in the populations and the exposure to radionuclides released and dispersed following the Chernobyl accident. Of particular note has been the occurrence of numerous thyroid cancers in children. The number of thyroid cancers in individuals exposed in childhood, particularly in the severely contaminated areas of Belarus, Russia, and Ukraine is considerably greater than expected based on previous knowledge. The high incidence and the short induction period have not been experienced in other populations, and other factors are most certainly influencing the risk. If the current trend continues, further thyroid cancers can be expected to occur, especially in those exposed at young ages. The most recent findings indicate that the thyroid cancer risk for those older than 10 years of age at the time of the accident is leveling off, while the increase continues for those younger than 4-5 years in 1986. Apart from the dramatic increase in thyroid cancer after childhood exposure, there is no evidence of a major public health impact 14 years after the Chernobyl accident. No increases in overall cancer incidence or mortality have been observed that could be attributed

  2. Accident termination by element dropout in the GCFR

    International Nuclear Information System (INIS)

    Torri, A.; Tomkins, J.L.

    1976-01-01

    Severe loss-of-flow accidents are being investigated for the GCFR in order to assess the risk from those low-probability accidents which lead to a loss of coolable core geometry. Accident mitigating phenomena unique to the GCFR have been identified for the loss of decay heat removal accident. Circumferential assembly duct melting is calculated to occur at the core mid-plane before the fuel within the assembly melts. The GCFR core assemblies are top-mounted and there is clearance between assemblies to accommodate swelling and thermal distortions without interference. No lateral core clamping system is employed and there are no structures in the plenum below the core. Thus it is possible for the lower portion of the individual assemblies, including most of the fuel, to drop to the cavity floor unless interference or bonding between assemblies develops during the accident. Due to the delay in duct corner melting the melt front at the duct mid-flat progresses over about one-half of the core height. The possibility of inter-element bonding by molten duct steel dislocated into the gap between assemblies has been recognized and a test program to verify the duct melting sequence and to investigate the duct dropout is being planned at the Los Alamos Scientific Laboratory

  3. Thermal Hydraulic design parameters study for severe accidents using neural networks

    Energy Technology Data Exchange (ETDEWEB)

    Roh, Chang Hyun; Chang, Soon Heung [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of); Chang, Keun Sun [Sunmoon University, Asan (Korea, Republic of)

    1998-12-31

    To provide the information on severe accident progression is very important for advanced or new type of nuclear power plant (NPP) design. A parametric study, therefore, was performed to investigate the effect of thermal hydraulic design parameters on severe accident progression of pressurized water reactors (PWRs). Nine parameters, which are considered important in NPP design or severe accident progression, were selected among the various thermal hydraulic design parameters. The backpropagation neural network (BPN) was used to determine parameters, which might more strongly affect the severe accident progression, among nine parameters. For training, different input patterns were generated by the latin hypercube sampling (LHS) technique and then different target patterns that contain core uncovery time and vessel failure time were obtained for Young Gwang Nuclear (YGN) Units 3 and 4 using modular accident analysis program (MAAP) 3.0B code. Three different severe accident scenarios, such as two loss of coolant accidents (LOCAs) and station blackout (SBO), were considered in this analysis. Results indicated that design parameters related to refueling water storage tank (RWST), accumulator and steam generator (S/G) have more dominant effects on the progression of severe accidents investigated, compared to the other six parameters. 9 refs., 5 tabs. (Author)

  4. Thermal Hydraulic design parameters study for severe accidents using neural networks

    Energy Technology Data Exchange (ETDEWEB)

    Roh, Chang Hyun; Chang, Soon Heung [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of); Chang, Keun Sun [Sunmoon University, Asan (Korea, Republic of)

    1997-12-31

    To provide the information on severe accident progression is very important for advanced or new type of nuclear power plant (NPP) design. A parametric study, therefore, was performed to investigate the effect of thermal hydraulic design parameters on severe accident progression of pressurized water reactors (PWRs). Nine parameters, which are considered important in NPP design or severe accident progression, were selected among the various thermal hydraulic design parameters. The backpropagation neural network (BPN) was used to determine parameters, which might more strongly affect the severe accident progression, among nine parameters. For training, different input patterns were generated by the latin hypercube sampling (LHS) technique and then different target patterns that contain core uncovery time and vessel failure time were obtained for Young Gwang Nuclear (YGN) Units 3 and 4 using modular accident analysis program (MAAP) 3.0B code. Three different severe accident scenarios, such as two loss of coolant accidents (LOCAs) and station blackout (SBO), were considered in this analysis. Results indicated that design parameters related to refueling water storage tank (RWST), accumulator and steam generator (S/G) have more dominant effects on the progression of severe accidents investigated, compared to the other six parameters. 9 refs., 5 tabs. (Author)

  5. EAC european accident code. A modular system of computer programs to simulate LMFBR hypothetical accidents

    International Nuclear Information System (INIS)

    Wider, H.; Cametti, J.; Clusaz, A.; Devos, J.; VanGoethem, G.; Nguyen, H.; Sola, A.

    1985-01-01

    One aspect of fast reactor safety analysis consists of calculating the strongly coupled system of physical phenomena which contribute to the reactivity balance in hypothetical whole-core accidents: these phenomena are neutronics, fuel behaviour and heat transfer together with coolant thermohydraulics in single- and two-phase flow. Temperature variations in fuel, coolant and neighbouring structures induce, in fact, thermal reactivity feedbacks which are added up and put in the neutronics calculation to predict the neutron flux and the subsequent heat generation in the reactor. At this point a whole-core analysis code is necessary to examine for any hypothetical transient whether the various feedbacks result effectively in a negative balance, which is the basis condition to ensure stability and safety. The European Accident Code (EAC), developed at the Joint Research Centre of the CEC at Ispra (Italy), fulfills this objective. It is a modular informatics structure (quasi 2-D multichannel approach) aimed at collecting stand-alone computer codes of neutronics, fuel pin mechanics and hydrodynamics, developed both in national laboratories and in the JRC itself. EAC makes these modules interact with each other and produces results for these hypothetical accidents in terms of core damage and total energy release. 10 refs

  6. Identification and assessment of BWR in-vessel severe accident mitigation strategies

    International Nuclear Information System (INIS)

    Hodge, S.A.; Kress, T.S.; Cleveland, J.C.; Petek, M.

    1992-01-01

    This paper briefly describes the results of work carried out in support of the US Nuclear Regulatory Commission Accident Management Research Program to evaluate the effectiveness and feasibility of current and proposed strategies for BWR severe accident management. These results are described in detail in the just-released report Identification and Assessment of BWR In-Vessel Severe Accident Mitigation Strategies, NUREG/CR-5869, which comprises three categories of findings. First, an assessment of the current status of accident management strategies for the mitigation of in-vessel events for BWR severe accident sequences is combined with a review of the BWR Owners' Group Emergency Procedure Guidelines (EPGs) to determine the extent to which they currently address the characteristic events of an unmitigated severe accident. Second, where considered necessary, new candidate accident management strategies are proposed for mitigation of the late-phase (after core damage has occurred) events. Finally, two of the four candidate strategies identified by this effort are assessed in detail. These are (1) preparation of a boron solution for reactor vessel refill should control blade damage occur during a period of temporary core dryout and (2) containment flooding to maintain the core debris within the reactor vessel if the injection systems cannot be restored

  7. Identification and assessment of BWR in-vessel severe accident mitigation strategies

    Energy Technology Data Exchange (ETDEWEB)

    Hodge, S.A.; Cleveland, J.C.; Kress, T.S.; Petek, M. [Oak Ridge National Lab., TN (United States)

    1992-10-01

    This report provides the results of work carried out in support of the US Nuclear Regulatory Commission Accident Management Research Program to develop a technical basis for evaluating the effectiveness and feasibility of current and proposed strategies for boiling water reactor (BWR) severe accident management. First, the findings of an assessment of the current status of accident management strategies for the mitigation of in-vessel events for BWR severe accident sequences are described. This includes a review of the BWR Owners` Group Emergency Procedure Guidelines (EPGSs) to determine the extent to which they currently address the characteristic events of an unmitigated severe accident and to provide the basis for recommendations for enhancement of accident management procedures. Second, where considered necessary, new candidate accident management strategies are proposed for mitigation of the late-phase (after core damage has occurred) events. Finally, recommendations are made for consideration of additional strategies where warranted, and two of the four candidate strategies identified by this effort are assessed in detail: (1) preparation of a boron solution for reactor vessel refill should control blade damage occur during a period of temporary core dryout and (2) containment flooding to maintain the core debris within the reactor vessel if the injection systems cannot be restored.

  8. Identification and assessment of BWR in-vessel severe accident mitigation strategies

    International Nuclear Information System (INIS)

    Hodge, S.A.; Cleveland, J.C.; Kress, T.S.; Petek, M.

    1992-10-01

    This report provides the results of work carried out in support of the US Nuclear Regulatory Commission Accident Management Research Program to develop a technical basis for evaluating the effectiveness and feasibility of current and proposed strategies for boiling water reactor (BWR) severe accident management. First, the findings of an assessment of the current status of accident management strategies for the mitigation of in-vessel events for BWR severe accident sequences are described. This includes a review of the BWR Owners' Group Emergency Procedure Guidelines (EPGSs) to determine the extent to which they currently address the characteristic events of an unmitigated severe accident and to provide the basis for recommendations for enhancement of accident management procedures. Second, where considered necessary, new candidate accident management strategies are proposed for mitigation of the late-phase (after core damage has occurred) events. Finally, recommendations are made for consideration of additional strategies where warranted, and two of the four candidate strategies identified by this effort are assessed in detail: (1) preparation of a boron solution for reactor vessel refill should control blade damage occur during a period of temporary core dryout and (2) containment flooding to maintain the core debris within the reactor vessel if the injection systems cannot be restored

  9. Key Characteristics of Combined Accident including TLOFW accident for PSA Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bo Gyung; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of); Yoon, Ho Joon [Khalifa University of Science, Technology and Research, Abu Dhabi (United Arab Emirates)

    2015-05-15

    The conventional PSA techniques cannot adequately evaluate all events. The conventional PSA models usually focus on single internal events such as DBAs, the external hazards such as fire, seismic. However, the Fukushima accident of Japan in 2011 reveals that very rare event is necessary to be considered in the PSA model to prevent the radioactive release to environment caused by poor treatment based on lack of the information, and to improve the emergency operation procedure. Especially, the results from PSA can be used to decision making for regulators. Moreover, designers can consider the weakness of plant safety based on the quantified results and understand accident sequence based on human actions and system availability. This study is for PSA modeling of combined accidents including total loss of feedwater (TLOFW) accident. The TLOFW accident is a representative accident involving the failure of cooling through secondary side. If the amount of heat transfer is not enough due to the failure of secondary side, the heat will be accumulated to the primary side by continuous core decay heat. Transients with loss of feedwater include total loss of feedwater accident, loss of condenser vacuum accident, and closure of all MSIVs. When residual heat removal by the secondary side is terminated, the safety injection into the RCS with direct primary depressurization would provide alternative heat removal. This operation is called feed and bleed (F and B) operation. Combined accidents including TLOFW accident are very rare event and partially considered in conventional PSA model. Since the necessity of F and B operation is related to plant conditions, the PSA modeling for combined accidents including TLOFW accident is necessary to identify the design and operational vulnerabilities.The PSA is significant to assess the risk of NPPs, and to identify the design and operational vulnerabilities. Even though the combined accident is very rare event, the consequence of combined

  10. Iodine removal in containment filtered venting system during nuclear accident

    International Nuclear Information System (INIS)

    Bera, Subrata; Deo, Anuj Kumar; Nagrale, D.B.; Paul, U.K.; Prasad, M.; Gaikwad, A.J.

    2015-01-01

    Post Fukushima nuclear accident, containment filtered venting system is being introduced in Indian nuclear power plant to strengthen the defense in depth safety barrier by depressurizing the containment building along with minimization of radioactivity release to environment during a severe accident. Radioactive iodine is one of the major contributors to radiation dose during early release phase of a severe accident. Physical and Chemical form of iodine and iodine bearing compounds includes particulates, elemental and organic. In the most efficient design of CFVS, wet scrubbing mechanism has been employed through use of venture scrubber. The Iodine removal process in wet scrubber involves two processes: chemical reaction in highly alkaline aqueous solution and impingement of particulates with water droplets produced in the venturi nozzle. In this paper, venturi has been modeled using the Calvert model. The variation of efficiency has been estimated for the different particle sizes. The impact of the shape parameter of log-normal distribution on the amount of scrubbed iodine has also been assessed. Release phase wise the scrubbed amount of iodine in the venturi based CFVS system has been estimated for a typical BWR. (author)

  11. Experimental investigation on single-phase pressure losses in nuclear debris beds: Identification of flow regimes and effective diameter

    Energy Technology Data Exchange (ETDEWEB)

    Clavier, R., E-mail: remi.clavier@irsn.fr [Institut de Radioprotection et de Sûreté Nucléaire (IRSN) – PSN-RES/SEREX/LE2M, Cadarache bât. 327, 13115 St Paul-lez-Durance (France); Chikhi, N., E-mail: nourdine.chikhi@irsn.fr [Institut de Radioprotection et de Sûreté Nucléaire (IRSN) – PSN-RES/SEREX/LE2M, Cadarache bât. 327, 13115 St Paul-lez-Durance (France); Fichot, F. [Institut de Radioprotection et de Sûreté Nucléaire (IRSN) – PSN-RES/SAG/LEPC, Cadarache bât. 700, 13115 St Paul-lez-Durance (France); Quintard, M. [Université de Toulouse – INPT – UPS – Institut de Mécanique des Fluides de Toulouse (IMFT), Allée Camille Soula, F-31400 Toulouse (France); CNRS – IMFT, F-31400 Toulouse (France)

    2015-10-15

    Highlights: • Single-phase pressure drops versus flow rates in particle beds are measured. • Conditions are representative of the reflooding of a nuclear fuel debris bed. • Darcy, weak inertial, strong inertial and weak turbulent regimes are observed. • A Darcy–Forchheimer law is found to be a good approximation in this domain. • A predictive correlation is derived from new experimental data. - Abstract: During a severe nuclear power plant accident, the degradation of the reactor core can lead to the formation of debris beds. The main accident management procedure consists in injecting water inside the reactor vessel. Nevertheless, large uncertainties remain regarding the coolability of such debris beds. Motivated by the reduction of these uncertainties, experiments have been conducted on the CALIDE facility in order to investigate single-phase pressure losses in representative debris beds. In this paper, these results are presented and analyzed in order to identify a simple single-phase flow pressure loss correlation for debris-bed-like particle beds in reflooding conditions, which cover Darcean to Weakly Turbulent flow regimes. The first part of this work is dedicated to study macro-scale pressure losses generated by debris-bed-like particle beds, i.e., high sphericity (>80%) particle beds with relatively small size dispersion (from 1 mm to 10 mm). A Darcy–Forchheimer law, involving the sum of a linear term and a quadratic deviation, with respect to filtration velocity, has been found to be relevant to describe this behavior in Darcy, Strong Inertial and Weak Turbulent regimes. It has also been observed that, in a restricted domain (Re = 15 to Re = 30) between Darcy and Weak Inertial regimes, deviation is better described by a cubic term, which corresponds to the so-called Weak Inertial regime. The second part of this work aims at identifying expressions for coefficients of linear and quadratic terms in Darcy–Forchheimer law, in order to obtain a

  12. Accident knowledge and emergency management

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, B; Groenberg, C D

    1997-03-01

    The report contains an overall frame for transformation of knowledge and experience from risk analysis to emergency education. An accident model has been developed to describe the emergency situation. A key concept of this model is uncontrolled flow of energy (UFOE), essential elements are the state, location and movement of the energy (and mass). A UFOE can be considered as the driving force of an accident, e.g., an explosion, a fire, a release of heavy gases. As long as the energy is confined, i.e. the location and movement of the energy are under control, the situation is safe, but loss of confinement will create a hazardous situation that may develop into an accident. A domain model has been developed for representing accident and emergency scenarios occurring in society. The domain model uses three main categories: status, context and objectives. A domain is a group of activities with allied goals and elements and ten specific domains have been investigated: process plant, storage, nuclear power plant, energy distribution, marine transport of goods, marine transport of people, aviation, transport by road, transport by rail and natural disasters. Totally 25 accident cases were consulted and information was extracted for filling into the schematic representations with two to four cases pr. specific domain. (au) 41 tabs., 8 ills.; 79 refs.

  13. Accident knowledge and emergency management

    International Nuclear Information System (INIS)

    Rasmussen, B.; Groenberg, C.D.

    1997-03-01

    The report contains an overall frame for transformation of knowledge and experience from risk analysis to emergency education. An accident model has been developed to describe the emergency situation. A key concept of this model is uncontrolled flow of energy (UFOE), essential elements are the state, location and movement of the energy (and mass). A UFOE can be considered as the driving force of an accident, e.g., an explosion, a fire, a release of heavy gases. As long as the energy is confined, i.e. the location and movement of the energy are under control, the situation is safe, but loss of confinement will create a hazardous situation that may develop into an accident. A domain model has been developed for representing accident and emergency scenarios occurring in society. The domain model uses three main categories: status, context and objectives. A domain is a group of activities with allied goals and elements and ten specific domains have been investigated: process plant, storage, nuclear power plant, energy distribution, marine transport of goods, marine transport of people, aviation, transport by road, transport by rail and natural disasters. Totally 25 accident cases were consulted and information was extracted for filling into the schematic representations with two to four cases pr. specific domain. (au) 41 tabs., 8 ills.; 79 refs

  14. Severe accidents at nuclear power plants. Their risk assessment and accident management

    International Nuclear Information System (INIS)

    Abe, Kiyoharu.

    1995-05-01

    This document is to explain the severe accident issues. Severe Accidents are defined as accidents which are far beyond the design basis and result in severe damage of the core. Accidents at Three Mild Island in USA and at Chernobyl in former Soviet Union are examples of severe accidents. The causes and progressions of the accidents as well as the actions taken are described. Probabilistic Safety Assessment (PSA) is a method to estimate the risk of severe accidents at nuclear reactors. The methodology for PSA is briefly described and current status on its application to safety related issues is introduced. The acceptability of the risks which inherently accompany every technology is then discussed. Finally, provision of accident management in Japan is introduced, including the description of accident management measures proposed for BWRs and PWRs. (author)

  15. The investigation of Passive Accident Mitigation Scheme for advanced PWR NPP

    International Nuclear Information System (INIS)

    Shi, Er-bing; Fang, Cheng-yue; Wang, Chang; Xia, Geng-lei; Zhao, Cui-na

    2015-01-01

    Highlights: • We put forward a new PAMS and analyze its operation characteristics under SBO. • We conduct comparative analysis between PAMS and Traditional Secondary Side PHRS. • The PAMS could cope with SBO accident and maintain the plant in safe conditions. • PAMS could decrease heat removal capacity of PHRS. • PAMS has advantage in reducing cooling rate and PCCT temperature rising amplitude. - Abstract: To enhance inherent safety features of nuclear power plant, the advanced pressurized water reactors implement a series of passive safety systems. This paper puts forward and designs a new Passive Accident Mitigation Scheme (PAMS) to remove residual heat, which consists of two parts: the first part is Passive Auxiliary Feedwater System (PAFS), and the other part is Passive Heat Removal System (PHRS). This paper takes the Westinghouse-designed Advanced Passive PWR (AP1000) as research object and analyzes the operation characteristics of PAMS to cope with the Station Blackout Accident (SBO) by using RELAP5 code. Moreover, the comparative analysis is also conducted between PAMS and Traditional Secondary Circuit PHRS to derive the advantages of PAMS. The results show that the designed scheme can remove core residual heat significantly and maintain the plant in safe conditions; the first part of PAMS would stop after 120 min and the second part has to come into use simultaneously; the low pressurizer (PZR) pressure signal would be generated 109 min later caused by coolant volume shrinkage, which would actuate the Passive Safety Injection System (PSIS) to recovery the water level of pressurizer; the flow instability phenomenon would occur and last 21 min after the PHRS start-up; according to the comparative analysis, the coolant average temperature gradient and the Passive Condensate Cooling Tank (PCCT) water temperature rising amplitude of PAMS are lower than those of Traditional Secondary Circuit PHRS

  16. Analysis of severe accidents in pressurized heavy water reactors

    International Nuclear Information System (INIS)

    2008-06-01

    Certain very low probability plant states that are beyond design basis accident conditions and which may arise owing to multiple failures of safety systems leading to significant core degradation may jeopardize the integrity of many or all the barriers to the release of radioactive material. Such event sequences are called severe accidents. It is required in the IAEA Safety Requirements publication on Safety of the Nuclear Power Plants: Design, that consideration be given to severe accident sequences, using a combination of engineering judgement and probabilistic methods, to determine those sequences for which reasonably practicable preventive or mitigatory measures can be identified. Acceptable measures need not involve the application of conservative engineering practices used in setting and evaluating design basis accidents, but rather should be based on realistic or best estimate assumptions, methods and analytical criteria. Recently, the IAEA developed a Safety Report on Approaches and Tools for Severe Accident Analysis. This publication provides a description of factors important to severe accident analysis, an overview of severe accident phenomena and the current status in their modelling, categorization of available computer codes, and differences in approaches for various applications of severe accident analysis. The report covers both the in- and ex-vessel phases of severe accidents. The publication is consistent with the IAEA Safety Report on Accident Analysis for Nuclear Power Plants and can be considered as a complementary report specifically devoted to the analysis of severe accidents. Although the report does not explicitly differentiate among various reactor types, it has been written essentially on the basis of available knowledge and databases developed for light water reactors. Therefore its application is mostly oriented towards PWRs and BWRs and, to a more limited extent, they can be only used as preliminary guidance for other types of reactors

  17. Experience and lessons learned from emergency disposal of Fukushima nuclear power station accident

    International Nuclear Information System (INIS)

    Xu Xiegu; Zhen Bei; Yang Xiaoming; Chen Xiaohua

    2012-01-01

    After Fukushima nuclear accident, we visited the related medical aid agencies for nuclear accidents and conducted investigations in disaster-affected areas in Japan. This article summarizes the problems with emergency disposal of Fukushima nuclear accident while disclosing problems should be solved during the emergency force construction for nuclear accidents. (authors)

  18. Conception of a model for the description of the rewetting phase of reactor fuel pins following a loss-of-coolant accident

    International Nuclear Information System (INIS)

    Hinderer, B.; Schuetzle, R.

    1976-10-01

    The aim of the present paper has been the development of a model describing rewetting of fuel rods in the reflood phase after a loss of coolant accident of a reactor. Because a suitable solution to the problem could not be found an appropriate model has been implemented into an IKE computer program for transient, two-dimensional heat conductance for a cylindrical rod. Developing this model experimental results of up-to-date literature were used. Remarkable is that very small meshes are necessary around the rewetting front to calculate the rewetting velocity which is strongly dependent on the quench temperature. (orig.) [de

  19. Identification of Drivers in Traffic Accidents and Determination of Passenger Position in a Vehicle by Finger Marks

    Directory of Open Access Journals (Sweden)

    Matej Trapečar

    2012-01-01

    Full Text Available The following paper aims to illustrate certain investigative activities in the forensic analysis and examination of the scene of traffic accidents. When a traffic accident occurs, the scene must be secured as soon as possible to enable professional and proper forensic investigation. Failure to secure the accident scene might result in losing or contaminating the traces, which makes it more difficult to prove or explain trace evidence in further procedure or even makes such evidence inadmissible. The topic is discussed from the viewpoint of crime scene examination, since analysing and investigating traffic accidents requires a great deal of expertise and attention of the investigators. Complex traffic accidents include feigned accidents, hit-and-run accidents as well as accidents in which the driver and passengers, dead or alive, need to be identified. In identifying the passengers, standard criminal investigation methods as well as police forensic and forensic medicine methods are followed. Such methods include confirming the identities with identity documents, other documents and vehicle ownership, fingerprints, biological traces, fibre traces, contact traces, traces of physical injuries on the driver and passengers, etc. According to the results obtained in fingerprint detection on human skin surfaces, this method can also be applied in confirming physical contact between the driver and the passengers in the accident, e.g. in the event of moving the victims and changing the scene of the accident.   Key words: traffic accidents, accident analysis, driver's identity, passengers' position, finger marks, human skin

  20. Severe accident phenomena

    International Nuclear Information System (INIS)

    Jokiniemi, J.; Kilpi, K.; Lindholm, I.; Maekynen, J.; Pekkarinen, E.; Sairanen, R.; Silde, A.

    1995-02-01

    Severe accidents are nuclear reactor accidents in which the reactor core is substantially damaged. The report describes severe reactor accident phenomena and their significance for the safety of nuclear power plants. A comprehensive set of phenomena ranging from accident initiation to containment behaviour and containment integrity questions are covered. The report is based on expertise gained in the severe accident assessment projects conducted at the Technical Research Centre of Finland (VTT). (49 refs., 32 figs., 12 tabs.)

  1. Health consequences of the Chernobyl accident. Results of the IPHECA pilot projects and related national programmes. Scientific report. International Programme on the Health Effects of the Chernobyl Accident (IPHECA)

    International Nuclear Information System (INIS)

    1996-01-01

    Since the Chernobyl accident, massive efforts have been made by the governmental authorities to mitigate the effects, to provide diagnosis, treatment and rehabilitation to those affected and to investigate the effects on health which had occurred. Vast amounts of resources have and continue to be expended in supporting these efforts. In 1991, WHO officially joined this effort through the establishment by the World Health Assembly of the International Programme on the Health Effects of the Chernobyl Accident (IPHECA). The objectives of this Programme were: to contribute to the efforts to alleviate the health consequences of the accident by assisting health authorities in Belarus, Russian Federation and Ukraine; to consolidate the experience gained from treatment of over-exposure and from various practical interventions and thereby improve medical preparedness for the future; and to acquire data in the fields of radiation epidemiology and medical response to disasters. IPHECA initially concentrated on five priority areas, and pilot projects were developed for implementation in Belarus, Russian Federation and Ukraine for each: thyroid, haematology, brain damage in-utero, epidemiological registry and oral health (only in Belarus). This publication is intended to fulfil a number of purposes. It provides an account of what was accomplished during the pilot phase of IPHECA. It discusses the protocols which were developed and used, summarizes the investigations which were carried out and reports on the instrumentation, supplies and training programmes which were provided. The publication also describes and discusses the results which have been obtained to date and identifies the still existing gaps in knowledge

  2. Health consequences of the Chernobyl accident. Results of the IPHECA pilot projects and related national programmes. Scientific report. International Programme on the Health Effects of the Chernobyl Accident (IPHECA)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    Since the Chernobyl accident, massive efforts have been made by the governmental authorities to mitigate the effects, to provide diagnosis, treatment and rehabilitation to those affected and to investigate the effects on health which had occurred. Vast amounts of resources have and continue to be expended in supporting these efforts. In 1991, WHO officially joined this effort through the establishment by the World Health Assembly of the International Programme on the Health Effects of the Chernobyl Accident (IPHECA). The objectives of this Programme were: to contribute to the efforts to alleviate the health consequences of the accident by assisting health authorities in Belarus, Russian Federation and Ukraine; to consolidate the experience gained from treatment of over-exposure and from various practical interventions and thereby improve medical preparedness for the future; and to acquire data in the fields of radiation epidemiology and medical response to disasters. IPHECA initially concentrated on five priority areas, and pilot projects were developed for implementation in Belarus, Russian Federation and Ukraine for each: thyroid, haematology, brain damage in-utero, epidemiological registry and oral health (only in Belarus). This publication is intended to fulfil a number of purposes. It provides an account of what was accomplished during the pilot phase of IPHECA. It discusses the protocols which were developed and used, summarizes the investigations which were carried out and reports on the instrumentation, supplies and training programmes which were provided. The publication also describes and discusses the results which have been obtained to date and identifies the still existing gaps in knowledge Refs, figs, tabs

  3. Investigation of relationship between mental workload and information flow rate of accident diagnosis tasks in NPPs

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Chang Hoon

    2005-02-15

    The objective of this study is to investigate experimentally the relationship between an operator's mental workload and the information flow rate of accident diagnosis tasks and further to propose the information flow rate as an analytic method for measuring the mental workload. There are two types of mental workload in the advanced MCR of NPPs: the information processing workload, which is the processing that the human operator must actually perform in order to complete the diagnosis task, and emotional stress workload experienced by the operator. In this study, the focus is on the former. Three kinds of methods are used to measure the operator's workload: information flow rate, subjective methods, and physiological measures. Information flows for eight accident diagnosis tasks are modeled qualitatively using a stage model and are quantified using Conant's model. The eight accident cases are considered here are: Loss Of Coolant Accident (LOCA), Steam Generator Tube Rupture (SGTR), Steam Line Break (SLB), Feedwater Line Break (FLB), Pressurizer (PZR) spray and heater failure, Reactor Coolant Pump (RCP) trip, Main Steam Isolation Valve (MSIV) failure, and PZR spray failure. The information flow rate is obtained for each diagnosis task by imposing time limit restrictions for the tasks. Subjective methods require the operators to respond to questionnaires to rate their level of mental effort. NASA-TLX and MCH scale are selected as subjective methods. NASA-TLX is a subjective method used in the various fields including the aviation, automobile, and nuclear industries. It has a multi-dimensional rating technique and provides an overall workload score based on a weighted average on six subscales using pair-wise comparison tests. MCH, on the other hand, is one-dimensional and uses a 10- point rating technique. As with NASA-TLX, the higher the score is, the higher the subjective workload is. For the physiological measurements, an eye tracking system analyzes

  4. Severe accident analysis using MARCH 1.0 code

    International Nuclear Information System (INIS)

    Guimaraes, A.C.F.

    1987-09-01

    The description and utilization of the MARCH 1.0 computer code, which aim to analyse physical phenomena associated with core meltdown accidents in PWR type reactors, are presented. The primary system is modeled as a single volume which is partitioned into a gas (steam and hydrogen) region and a water region. March predicts blowdown from the primary system in single phase. Based on results of the probabilistic safety analysis for the Zion and Indian Point Nuclear Power Plants, the S 2 HFX sequence accident for Angra-1 reactor is studied. The S 2 HFX sequence means that the loss of coolant accident occurs through small break in primary system with bot total failures of the reactor safety system and containment in yours recirculation modes, leading the core melt and the containment failure due to overpressurization. The obtained results were considered reasonable if compared with the results obtained for the Zion and Indian Point nuclear power plants. (Author) [pt

  5. Radiation doses in accidents at sea-transportation of spent fuel

    International Nuclear Information System (INIS)

    Appelgren, A.; Bergstroem, U.; Devell, L.

    1978-01-01

    In order to investigate the consequences of shipping accidents, a release of activity is assumed. This report presents the calculations of individual and collective doses from the two most severe postulated accidents which are given in a special accident analysis. One of the accidents is a ship collision together with fire on-board, the ship is floating after the collision and a certain quantity volatile fission products gives airborne activity. In the other case, it is a fire on-board, the ship will sink and cause a certain leakage to the sea

  6. Non-vehicular homicides masquerading as road traffic accidents.

    Science.gov (United States)

    Zine, K U; Mugadlimath, Anand B; Sane, Mandar Ramchandra; Bhuyyar, Chandrashekhar; Rathod, S N

    2016-03-01

    Interfering with or planting evidence to disguise the cause of a death is not uncommon in forensic practice. Homicides staged as road accidents are, however, rarely encountered by crime scene investigators. We report two homicides which were presented as road traffic accidents. Case 1: Dead body of a 35-year-old male was brought for autopsy with history of road traffic accident. Primary police inquiry suggested that the victim was knocked down by a speeding four-wheeler, while walking by the side of a high way with his friends. On postmortem examination the deceased's death was found due to homicidal smothering staged as a road traffic accident. Case 2: Dead body of 40-year-old male was brought for autopsy with history of road traffic accident. It was an unwitnessed crush by a speeding four-wheeler. However, on postmortem examination, the deceased was found to have died from homicidal multiple stab wounds with his death staged as a road traffic accident. Importance of meticulous autopsy to determine accurately the cause of death is emphasized. © The Author(s) 2015.

  7. Lesson from a 60Co source radiation accident

    International Nuclear Information System (INIS)

    Guo Yong; Zhang Wenzhong

    2002-01-01

    A serious radiation accident happened an a 60 Co irradiation facility in Shanghai. 7 workers were uniformly exposed acutely. An investigation was done after the accident and a conclusion was achieved that the irregular operation was the direct reason for the accident. The operation of these workers did not comply with the requirements specified in the national standards-- 60 irradiation facility>> which demands that the examination should be done every day before operation, and the irradiation facility does not stop running when the auto-lock safety system on that facility has been removed. Some lessons should be drawn from the accident: popularizing the culture of safety, enhancing the law of safety, and ensuring the operation of radiation devices within the demands of safety

  8. Lessons from the Fukushima nuclear power accident

    International Nuclear Information System (INIS)

    Hatamura, Yotaro

    2013-01-01

    Through the investigation of the Fukushima Nuclear Power Accident as the chairman of the related Government's Committee, many things had been considered. Essence of the accident could be not only what occurred in the Fukushima nuclear power station, but also dispersed radioactive materials forced many residents to move and not to be returned. Such events as indication errors of water level meter occurring in severe accident could no be thought and remote mechanical operation of valves under high radiation environment were not prepared. Contamination by radioactive clouds caused the evacuation of residents for a long period. Lessons learned from the accident were described such as; (1) the verification of the road to failure connecting selected accident sequence and road to success with another supposed choice, (2) considering what might occur and then what should be needed on the contrary, (3) nuclear power, if should be continued, should be used with the premise of its hazards, and (4) advise to nuclear engineer for adequate information dissemination and technical explanation to the public and keeping nuclear technologies alive. (T. Tanaka)

  9. New investigation of phase equilibria in the system Al-Cu-Si.

    Science.gov (United States)

    Ponweiser, Norbert; Richter, Klaus W

    2012-01-25

    The phase equilibria and invariant reactions in the system Al-Cu-Si were investigated by a combination of optical microscopy, powder X-ray diffraction (XRD), differential thermal analysis (DTA) and electron probe micro analysis (EPMA). Isothermal phase equilibria were investigated within two isothermal sections. The isothermal section at 500 °C covers the whole ternary composition range and largely confirms the findings of previous phase diagram investigations. The isothermal section at 700 °C describes phase equilibria only in the complex Cu-rich part of the phase diagram. A new ternary compound τ was found in the region between (Al,Cu)-γ(1) and (Cu,Si)-γ and its solubility range was determined. The solubility of Al in κ-CuSi was found to be extremely high at 700 °C. In contrast, no ternary solubility in the β-phase of Cu-Al was found, although this phase is supposed to form a complete solid solution according to previous phase diagram assessments. Two isopleths, at 10 and 40 at.% Si, were investigated by means of DTA and a partial ternary reaction scheme (Scheil diagram) was constructed, based on the current work and the latest findings in the binary systems Al-Cu and Cu-Si. The current study shows that the high temperature equilibria in the Cu-rich corner are still poorly understood and additional studies in this area would be favorable.

  10. The Fukushima accident and its consequences. Facts, explanations and comments

    International Nuclear Information System (INIS)

    2012-01-01

    This document proposes an overview of the present situation in the different reactors of the Fukushima power station and discusses its control by the operator. It also describes what went on, the causes of the accident, and what occurred on the accident day (earthquake, tsunami, flooding). It discusses whether some mistakes regarding the design and the protection of reactors could explain the accident. It presents the various measures which have been immediately implemented to protect the populations and to confine the accident. It proposes an assessment of damages for the ground and marine environment in terms of contamination. It addresses the consequences of the released radioactivity on population health and on personnel intervening within the site. It discusses the restoration perspectives for contaminated areas and the possible return of evacuated population. Then, it describes the different phases for the station dismantling. It evokes the issue of fallouts beyond Japan and in Europe, outlines some lessons learned from the accident and new safety measures to be implemented in France. It discusses how nuclear risk management is organised in France and its efficiency. It addresses the consequences for the development of nuclear energy in the world

  11. Prevention of pedestrian accidents.

    OpenAIRE

    Kendrick, D

    1993-01-01

    Child pedestrian accidents are the most common road traffic accident resulting in injury. Much of the existing work on road traffic accidents is based on analysing clusters of accidents despite evidence that child pedestrian accidents tend to be more dispersed than this. This paper analyses pedestrian accidents in 573 children aged 0-11 years by a locally derived deprivation score for the years 1988-90. The analysis shows a significantly higher accident rate in deprived areas and a dose respo...

  12. Behavior of U3Si2 Fuel and FeCrAl Cladding under Normal Operating and Accident Reactor Conditions

    International Nuclear Information System (INIS)

    Gamble, Kyle Allan Lawrence; Hales, Jason Dean; Barani, Tommaso; Pizzocri, Davide; Pastore, Giovanni

    2016-01-01

    As part of the Department of Energy's Nuclear Energy Advanced Modeling and Simulation program, an Accident Tolerant Fuel High Impact Problem was initiated at the beginning of fiscal year 2015 to investigate the behavior of \\usi~fuel and iron-chromium-aluminum (FeCrAl) claddings under normal operating and accident reactor conditions. The High Impact Problem was created in response to the United States Department of Energy's renewed interest in accident tolerant materials after the events that occurred at the Fukushima Daiichi Nuclear Power Plant in 2011. The High Impact Problem is a multinational laboratory and university collaborative research effort between Idaho National Laboratory, Los Alamos National Laboratory, Argonne National Laboratory, and the University of Tennessee, Knoxville. This report primarily focuses on the engineering scale research in fiscal year 2016 with brief summaries of the lower length scale developments in the areas of density functional theory, cluster dynamics, rate theory, and phase field being presented.

  13. Accident Locations, MDTA Accidents, Accidents on MDTA locations, Accidents on I 95, US 50, I 695, Accident on John F Kennedy Highway, Nice Bridge, Bay Bridge locations, Published in 2011, 1:1200 (1in=100ft) scale, Maryland Transportation Authority.

    Data.gov (United States)

    NSGIC State | GIS Inventory — Accident Locations dataset current as of 2011. MDTA Accidents, Accidents on MDTA locations, Accidents on I 95, US 50, I 695, Accident on John F Kennedy Highway, Nice...

  14. Influence of initial conditions on rod behaviour during boiling crisis phase following a reactivity initiated accident

    International Nuclear Information System (INIS)

    Georgenthum, V.; Sugiyama, T.

    2010-01-01

    In the frame of their research programs on high burn-up fuel safety, the French Institute for Radioprotection and Nuclear Safety (IRSN) and the Japan Atomic Energy Agency (JAEA) performed a large set of tests devoted to the study of PWR fuel rod behavior during Reactivity Initiated Accident (RIA) respectively in the CABRI reactor and in the NSRR reactor. The reactor test conditions are different in terms of coolant nature, temperature and pressure. In the CABRI reactor, tests were performed until now with sodium coolant at 280 Celsius degrees and 3 bar. In the NSRR reactor most of the tests were performed with stagnant water at 20 C. degrees and atmospheric pressure but recently a new high temperature high pressure capsule has been developed which allows to performed tests at up to 280 Celsius degrees and 70 bar. The paper discusses the influence of test conditions on rod behaviour during boiling phase, based on tests results and SCANAIR code calculations. The study shows that when the boiling crisis is reached, the initial inner and outer rod pressure have an essential impact on the clad straining and possible ballooning. The analysis of the different test conditions makes it possible to discriminate the influence of initial conditions on the different phases of the transient and is useful for modelling and code development. (authors)

  15. Investigation of phase stability in the scandia-zirconia

    International Nuclear Information System (INIS)

    Grosso, Robson Lopes

    2016-01-01

    In this work, the phase stability of scandia-zirconia (ScSZ) system was investigated by the thermodynamic study of nanoparticles, within the range of 0 to 20 mol% Sc 2 O 3 , and by codoping of ZrO 2 -10 mol% Sc 2 O 3 (10ScSZ) with Dy 2 O 3 and Nb 2 O 5 . The phase stability of ScSZ was evaluated based on thermodynamic data collected by water adsorption microcalorimetry and high temperature oxide melt solution. Nanostructured zirconia-scandia solid solutions were synthesized by coprecipitation method. Thermodynamic data were determined for ScSZ polymorph (monoclinic, tetragonal, cubic, rhombohedral β and γ) found by X-ray diffraction. This systemic work resulted in an unprecedented phase diagram at the nanoscale of particle size-composition. The effects of additives on 10ScSZ were investigated aiming to stabilize the cubic (c) structure at room temperature and to suppress the characteristic cubic-rhombohedral β phase transformation. Compositions were prepared by coprecipitation and solid state reaction. Materials were sintered by conventional and spark plasma sintering. Full stabilization of the cubic phase was attained by 1 mol% Dy 2 O 3 and 0.5 mol% Nb 2 O 5 additions. The smallest Nb 2 O 5 content required for cubic phase stabilization was attributed to liquid phase formation during sintering and to small ionic radius of Nb 5+ . Results of high temperature X-ray diffraction and thermal analysis show suppression of the c-β transformation. Samples containing 0.5 mol% Nb 2 O 5 show total ionic conductivity similar to 10ScSZ without additives within a broad temperature range with high stability during 170 h at 600 °C. (author)

  16. Reactor Core Coolability Analysis during Hypothesized Severe Accidents of OPR1000

    International Nuclear Information System (INIS)

    Lee, Yongjae; Seo, Seungwon; Kim, Sung Joong; Ha, Kwang Soon; Kim, Hwan-Yeol

    2014-01-01

    Assessment of the safety features over the hypothesized severe accidents may be performed experimentally or numerically. Due to the considerable time and expenditures, experimental assessment is implemented only to the limited cases. Therefore numerical assessment has played a major role in revisiting severe accident analysis of the existing or newly designed power plants. Computer codes for the numerical analysis of severe accidents are categorized as the fast running integral code and detailed code. Fast running integral codes are characterized by a well-balanced combination of detailed and simplified models for the simulation of the relevant phenomena within an NPP in the case of a severe accident. MAAP, MELCOR and ASTEC belong to the examples of fast running integral codes. Detailed code is to model as far as possible all relevant phenomena in detail by mechanistic models. The examples of detailed code is SCDAP/RELAP5. Using the MELCOR, Carbajo. investigated sensitivity studies of Station Black Out (SBO) using the MELCOR for Peach Bottom BWR. Park et al. conduct regulatory research of the PWR severe accident. Ahn et al. research sensitivity analysis of the severe accident for APR1400 with MELCOR 1.8.4. Lee et al. investigated RCS depressurization strategy and developed a core coolability map for independent scenarios of Small Break Loss-of-Coolant Accident (SBLOCA), SBO, and Total Loss of Feed Water (TLOFW). In this study, three initiating cases were selected, which are SBLOCA without SI, SBO, and TLOFW. The initiating cases exhibit the highest probability of transitioning into core damage according to PSA 1 of OPR 1000. The objective of this study is to investigate the reactor core coolability during hypothesized severe accidents of OPR1000. As a representative indicator, we have employed Jakob number and developed JaCET and JaMCT using the MELCOR simulation. Although the RCS pressures for the respective accident scenarios were different, the JaMCT and Ja

  17. Enhanced Accident Tolerant LWR Fuels National Metrics Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Lori Braase

    2013-01-01

    The U.S. Department of Energy Office of Nuclear Energy (DOE-NE), in collaboration with the nuclear industry, has been conducting research and development (R&D) activities on advanced Light Water Reactor (LWR) fuels for the last few years. The emphasis for these activities was on improving the fuel performance in terms of increased burnup for waste minimization and increased power density for power upgrades, as well as collaborating with industry on fuel reliability. After the events at the Fukushima Nuclear Power Plant in Japan in March 2011, enhancing the accident tolerance of LWRs became a topic of serious discussion. In the Consolidated Appropriations Act, 2012, Conference Report 112-75, the U.S. Congress directed DOE-NE to: • Give “priority to developing enhanced fuels and cladding for light water reactors to improve safety in the event of accidents in the reactor or spent fuel pools.” • Give “special technical emphasis and funding priority…to activities aimed at the development and near-term qualification of meltdown-resistant, accident-tolerant nuclear fuels that would enhance the safety of present and future generations of light water reactors.” • Report “to the Committee, within 90 days of enactment of this act, on its plan for development of meltdown-resistant fuels leading to reactor testing and utilization by 2020.” Fuels with enhanced accident tolerance are those that, in comparison with the standard UO2-zirconium alloy system currently used by the nuclear industry, can tolerate loss of active cooling in the reactor core for a considerably longer time period (depending on the LWR system and accident scenario) while maintaining or improving the fuel performance during normal operations, and operational transients, as well as design-basis and beyond design-basis events. The overall draft strategy for development and demonstration is comprised of three phases: Feasibility Assessment and Down-selection; Development and Qualification; and

  18. National response plan - Major nuclear or radiological accidents

    International Nuclear Information System (INIS)

    2014-02-01

    France has been implementing stringent radiation protection and nuclear safety and security measures for many years. However, this does not mean that the country is exempt from having to be prepared to deal with an emergency. Changes in France, Europe and other parts of the globe have made it necessary for France to reconsider how it responds to nuclear and radiological emergencies. As the potential impact of a nuclear or radiological accident can affect a wide range of activities, the plan described herein is based on a cross-sector and inter-ministerial approach to emergency response. The Chernobyl and Fukushima-Daiichi disasters are proof that the consequences of a major nuclear or radiological accident can affect all levels of society. These challenges are substantial and relate to: public health: An uncontrolled nuclear accident can have immediate consequences (death, injury, irradiation) as well as long-term consequences that can lead to increased risk of developing radiation-induced diseases (such as certain types of cancer); environmental quality: Radiation contamination can last for several decades and, in some cases, can result in an area being closed off permanently to the public; economic and social continuity: Nuclear accidents bring human activity to a halt in contaminated areas, disrupting the economic and social order of the entire country. It may therefore be necessary to adapt economic and social systems and carry out clean-up operations if people and businesses have been displaced; quality of international relations: Related to fulfillment of obligations to alert and inform European and international partners. This international dimension also covers the protection of French nationals present in countries stricken by a nuclear accident. This national plan provides reference information on how to prepare for a nuclear or radiological emergency and make the appropriate decisions in the event of an emergency. It covers the emergency phase (including

  19. Accident loads for a VVER-440/213 containment

    Energy Technology Data Exchange (ETDEWEB)

    Techy, Z. [Institute for Electric Power Research (VEIKI), Budapest (Hungary); Lajtha, G. [Institute for Electric Power Research (VEIKI), Budapest (Hungary); Taubner, R. [Institute for Electric Power Research (VEIKI), Budapest (Hungary)

    1995-08-01

    Specific features of the VVER-440/213 containment are the subdivided rectangular building and the localization system including the bubbler trays and air traps. Accident loads are calculated for a large break loss of coolant accident (LBLOCA). The maximum pressure and temperature loads are calculated with different codes during the blowdown phase of the LBLOCA. The uncertainty margins of the maximum pressure are given in this case. Sensitivity studies are performed for different leakage rates and hydraulic data of the containment. The effects of the active and passive spray systems on the depressurization are presented in this paper. The maximum pressure loads are also examined in case of degraded conditions of the localization system. (orig.).

  20. Study on risk factors of PWR accidents beyond design basis

    International Nuclear Information System (INIS)

    Ahn, Seung Hoon; Nah, W. J.; Bang, Y. S.; Oh, D. Y.; Oh, S. H.

    2005-01-01

    Development of the regulatory guidelines for Beyond Design Basis Accidents (BDBA) with high risk requires a detailed investigation of major factors contributing to the event risk. In this study, each event was classified by the level of risk, based on the probabilistic safety assessment results, so that BDBA with high risk could be selected, with consideration of foreign and domestic regulations, and operating experiences. The regulatory requirements and technical backgrounds for the selected accidents were investigated, and effective regulatory approaches for risk reduction of the accidents. The following conclusions were drawn from this study: - Selected high risk BDBA is station blackout, anticipated without scram, total loss of feedwater. - Major contributors to the risk of selected events were investigated, and appropriate assessment of them was recommended for development of the regulatory guidelines

  1. The Human Aspect of the Fukushima Daiichi Accident

    International Nuclear Information System (INIS)

    Anegawa, T.; Kawano, A.

    2016-01-01

    Recognizing itself as the main party involved in the nuclear accident triggered by the Tohoku-Chihou-Taiheiyo-Oki Earthquake on March 11, 2011, Tokyo Electric Power Company (TEPCO) has performed accident investigation from various aspects. Results of the investigation are reported mainly in two reports; (1) Fukushima Nuclear Accident Analysis Report (June 20, 2012), which identified the timeline and the proximate causes of the accident, and (2) Summary of Fukushima Nuclear Accident and Nuclear Safety Reform Plan (March 29, 2013) to set forth the results of the investigation and provide an analysis of the background factors surrounding the accident and countermeasures taken. This presentation will first provide overview of the accident response at Fukushima Daiichi and Daini Nuclear Power Stations. Voices from the first responders at the sites will be introduced in order to share thoughts of individuals involved in the emergency response. Summary of retrospective study of the accident by one of the shift supervisors at the time of the accident will be presented in order to share the facts that happened at main control rooms. The shift supervisor and his crew had to manage the situation for extended period of time that exceeded the scenarios that they had been trained, in a situation with no lightning and high radiation condition. During the accident response, shift supervisors had to decide to dispatch some of his crew members to the field to open valves, check the status of equipment etc., in the situation where the high radiation exposure is foreseen. The presentation will include conflict of shift supervisors and crew focusing on the human aspects. In addition, actions being taken at the Emergency Response Centers (ERC) set up at the seismic-isolated building on-site and the Headquarters in Tokyo will be shared focusing on the human aspects related to the accident progress. This includes difficult decisions to dispatch first responders to the field, in the

  2. A tool for safety officers when analysing the basic causes of simple accidents

    DEFF Research Database (Denmark)

    Jørgensen, Kirsten

    Most accidents that happen in enterprises are simple and seldom have serious invalidating consequences. Very often these kinds of accident are not investigated and if they are, then the investigation is very brief, with comments such as that it was the victim’s own fault or just an unlucky...... for some years with interesting results. Both the difficulties and the benefits will be presented, together with examples of the use of the tool. The main purpose of the tool is to demonstrate how management and workers can get a much better understanding of why accidents happen, even those accidents...... that seem to be unavoidable, and that simple accidents never are simple, but always have root causes on which preventive action can be focused....

  3. Applying the AcciMap methodology to investigate the tragic Sewol Ferry accident in South Korea.

    Science.gov (United States)

    Lee, Samuel; Moh, Young Bo; Tabibzadeh, Maryam; Meshkati, Najmedin

    2017-03-01

    This study applies the AcciMap methodology, which was originally proposed by Professor Jens Rasmussen (1997), to the analysis of the tragic Sewol Ferry accident in South Korea on April 16, 2014, which killed 304 mostly young people and is considered as a national disaster in that country. This graphical representation, by incorporating associated socio-technical factors into an integrated framework, provides a big-picture to illustrate the context in which an accident occurred as well as the interactions between different levels of the studied system that resulted in that event. In general, analysis of past accidents within the stated framework can define the patterns of hazards within an industrial sector. Such analysis can lead to the definition of preconditions for safe operations, which is a main focus of proactive risk management systems. In the case of the Sewol Ferry accident, a lot of the blame has been placed on the Sewol's captain and its crewmembers. However, according to this study, which relied on analyzing all available sources published in English and Korean, the disaster is the result of a series of lapses and disregards for safety across different levels of government and regulatory bodies, Chonghaejin Company, and the Sewol's crewmembers. The primary layers of the AcciMap framework, which include the political environment and non-proactive governmental body; inadequate regulations and their lax oversight and enforcement; poor safety culture; inconsideration of human factors issues; and lack of and/or outdated standard operating and emergency procedures were not only limited to the maritime industry in South Korea, and the Sewol Ferry accident, but they could also subject any safety-sensitive industry anywhere in the world. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Phase I Source Investigation, Heckathorn Superfund Site, Richmond, California

    Energy Technology Data Exchange (ETDEWEB)

    Kohn, Nancy P; Evans, Nathan R

    2002-12-18

    This report represents Phase I of a multi-phase approach to a source investigation of DDT at the Heckathorn Superfund Site, Richmond, California, the former site of a pesticide packaging plant, and the adjacent waterway, the Lauritzen Channel. Potential identified sources of contamination were from sloughed material from undredged areas (such as side banks) and from outfall pipes. Objectives of Phase I included the (1) evaluation of pesticide concentrations associated with discharge from outfalls, (2) identification of additional outfalls in the area, (3) identification of type, quantity, and distribution of sediment under the Levin pier, (4) quantification of pesticide concentrations in sediment under the pier, and (5) evaluation of sediment structure and slope stability under the pier. Field operations included the collection of sediment directly from inside the mouths of outfall pipes, when possible, or the deployment of specially designed particle traps where direct sampling was problematic. Passive water samplers were placed at the end of known outfall pipes and analyzed for DDT and other pesticides of concern. Underwater dive surveys were conducted beneath the Levin pier to document type, slope, and thickness of sediment. Samples were collected at locations of interest and analyzed for contaminants. Also sampled was soil from bank areas, which were suspected of potentially contributing to continued DDT contamination of the Lauritzen Channel through erosion and groundwater leaching. The Phase I Source Investigation was successful in identifying significant sources of DDT contamination to Lauritzen Channel sediment. Undredged sediment beneath the Levin pier that has been redistributed to the channel is a likely source. Two outfalls tested bear further investigation. Not as well-defined are the contributions of bank erosional material and groundwater leaching. Subsequent investigations will be based on the results of this first phase.

  5. Alcohol abuse and involvement in traffic accidents in the Brazilian population, 2013.

    Science.gov (United States)

    Damacena, Giseli Nogueira; Malta, Deborah Carvalho; Boccolini, Cristiano Siqueira; Souza, Paulo Roberto Borges de; Almeida, Wanessa da Silva de; Ribeiro, Lucas Sisinno; Szwarcwald, Célia Landmann

    2016-12-01

    Abstract This article aims to analyze alcohol abuse and frequent consumption according to sociodemographic characteristics and investigate the risk of greater involvement in traffic accidents, using data from the National Health Survey (PNS), 2013, Brazil. Events investigated were alcohol abuse and frequent consumption and if the individual was involved in a traffic accident and sustained an injury in the last 12 months. We investigated both events according to sociodemographic characteristics and assessed the association among them through multivariate logistic regression. The prevalence of alcohol abuse and frequent consumption was 6.1% for the population aged 18 years and over, 8.9% among men and 3.6% among women. The prevalence of involvement in traffic accidents was 3.1% in the general population and 6.1% among those who reported alcohol abuse. After controlling for sociodemographic factors, alcohol abuse and frequent consumption was significantly associated with traffic accidents. Considering a higher risk of involvement in traffic accidents among individuals who reported alcohol abuse and frequent consumption, monitoring blood alcohol concentration of drivers becomes a strategic possibility of intervention.

  6. Numerical simulation of the accident of Three Mile Island

    International Nuclear Information System (INIS)

    Perrin, M.H.; Kastelanski, P.

    1981-01-01

    The chief object of the present study was to assess the ability of our numerical code for the dynamic behavior of power plants, SICLE, to handle the simulation of small accidents in PWRs. In the first part of the paper the authors introduce the main principles, equations and numerical methods of the code. In the second part those of the elements of Three Mile Island Power Plant which were simulated, the different phases of the accident and the results obtained with the code are described. These results are compared to the values recorded in the plant and generally a good agreement is found (for instance the primary pressure). As a conclusion SICLE is the minimum code for representing accidents such as Three Mile Island; its main advantage lies in its ability to take into account all the elements of the plant which are important in the study

  7. Acute cerebral vascular accident associated with hyperperfusion

    International Nuclear Information System (INIS)

    Soin, J.S.; Burdine, J.A.

    1976-01-01

    Cerebral radionuclide angiography can demonstrate decreased or normal radioactivity in the affected region during the arterial phase in patients who have sustained a cerebral vascular accident and thus enhances the diagnostic specificity of the static brain image. In an occasional patient, however, a seemingly paradoxical pattern of regional hyperperfusion with a return to normal or subnormal perfusion following the acute phase has been observed. This phenomenon, called luxury perfusion, has been defined using intra-arterial 133 Xe for semiquantitative cerebral blood flow measurements and should be kept in mind as a potentially misleading cerebral imaging pattern

  8. Investigation on thixojoining to produce hybrid components with intermetallic phase

    Science.gov (United States)

    Seyboldt, Christoph; Liewald, Mathias

    2018-05-01

    Current research activities at the Institute for Metal Forming Technology of the University of Stuttgart are focusing on the manufacturing of hybrid components using semi-solid forming strategies. One process investigated is the joining of different materials in the semi-solid state and is so called "thixojoining". In this process, metallic inlays are inserted into the semi-solid forming die before the actual forming process and are then joined with a material which was heated up to its semi-solid state. Earlier investigations have shown that using this process a very well-shaped form closure can be produced. Furthermore, it was found that sometimes intermetallic phases are built between the different materials, which decisively influence the part properties of such hybrid components for its future application. Within the framework presented in this paper, inlays made of aluminum, brass and steel were joined with aluminum in the semi-solid state. The aim of the investigations was to create an intermetallic bond between the different materials. For this investigations the liquid phase fraction of the aluminum and the temperature of the inlay were varied in order to determine the influence on the formation of the intermetallic phase. Forming trials were performed using a semi-solid forming die with a disk shaped design. Furthermore, the intermetallic phase built was investigated using microsections.

  9. Individual feature identification method for nuclear accident emergency decision-making

    International Nuclear Information System (INIS)

    Chen Yingfeng; Wang Jianlong; Lin Xiaoling; Yang Yongxin; Lu Xincheng

    2014-01-01

    According to the individual feature identification method and combining with the characteristics of nuclear accident emergency decision-making, the evaluation index system of the nuclear accident emergency decision-making was determined on the basis of investigation and analysis. The effectiveness of the nuclear accident emergency decision-making was evaluated based on the individual standards by solving the individual features of the individual standard identification decisions. The case study shows that the optimization result is reasonable, objective and reliable, and it can provide an effective analysis method and decision-making support for optimization of nuclear accident emergency protective measures. (authors)

  10. An Examination of Aviation Accidents Associated with Turbulence, Wind Shear and Thunderstorm

    Science.gov (United States)

    Evans, Joni K.

    2013-01-01

    The focal point of the study reported here was the definition and examination of turbulence, wind shear and thunderstorm in relation to aviation accidents. NASA project management desired this information regarding distinct subgroups of atmospheric hazards, in order to better focus their research portfolio. A seven category expansion of Kaplan's turbulence categories was developed, which included wake turbulence, mountain wave turbulence, clear air turbulence, cloud turbulence, convective turbulence, thunderstorm without mention of turbulence, and low altitude wind shear, microburst or turbulence (with no mention of thunderstorms).More than 800 accidents from flights based in the United States during 1987-2008 were selected from a National Transportation Safety Board (NTSB) database. Accidents were selected for inclusion in this study if turbulence, thunderstorm, wind shear or microburst was considered either a cause or a factor in the accident report, and each accident was assigned to only one hazard category. This report summarizes the differences between the categories in terms of factors such as flight operations category, aircraft engine type, the accident's geographic location and time of year, degree of injury to aircraft occupants, aircraft damage, age and certification of the pilot and the phase of flight at the time of the accident.

  11. Causation of severe and fatal accidents in the manufacturing sector.

    Science.gov (United States)

    Carrillo-Castrillo, Jesús A; Rubio-Romero, Juan C; Onieva, Luis

    2013-01-01

    The main purpose of this paper is to identify the most frequent causes of accidents in the manufacturing sector in Andalusia, Spain, to help safety practitioners in the task of prioritizing preventive actions. Official accident investigation reports are analyzed. A causation pattern is identified with the proportion of causes of each of the different possible groups of causes. We found evidence of a differential causation between slight and nonslight accidents. We have also found significant differences in accident causation depending on the mechanism of the accident. These results can be used to prioritize preventive actions to combat the most likely causes of each accident mechanism. We have also done research on the associations of certain latent causes with specific active (immediate) causes. These relationships show how organizational and safety management can contribute to the prevention of active failures.

  12. Development of the simulation system IMPACT for analysis of nuclear power plant severe accidents

    International Nuclear Information System (INIS)

    Naitoh, Masanori; Ujita, Hiroshi; Nagumo, Hiroichi

    1997-01-01

    The Nuclear Power Engineering Corporation (NUPEC) has initiated a long-term program to develop the simulation system IMPACT for analysis of hypothetical severe accidents in nuclear power plants. IMPACT employs advanced methods of physical modeling and numerical computation, and can simulate a wide spectrum of senarios ranging from normal operation to hypothetical, beyond-design-basis-accident events. Designed as a large-scale system of interconnected, hierarchical modules, IMPACT's distinguishing features include mechanistic models based on first principles and high speed simulation on parallel processing computers. The present plan is a ten-year program starting from 1993, consisting of the initial one-year of preparatory work followed by three technical phases: Phase-1 for development of a prototype system; Phase-2 for completion of the simulation system, incorporating new achievements from basic studies; and Phase-3 for refinement through extensive verification and validation against test results and available real plant data

  13. Generalized modeling of multi-component vaporization/condensation phenomena for multi-phase-flow analysis

    International Nuclear Information System (INIS)

    Morita, K.; Fukuda, K.; Tobita, Y.; Kondo, Sa.; Suzuki, T.; Maschek, W.

    2003-01-01

    A new multi-component vaporization/condensation (V/C) model was developed to provide a generalized model for safety analysis codes of liquid metal cooled reactors (LMRs). These codes simulate thermal-hydraulic phenomena of multi-phase, multi-component flows, which is essential to investigate core disruptive accidents of LMRs such as fast breeder reactors and accelerator driven systems. The developed model characterizes the V/C processes associated with phase transition by employing heat transfer and mass-diffusion limited models for analyses of relatively short-time-scale multi-phase, multi-component hydraulic problems, among which vaporization and condensation, or simultaneous heat and mass transfer, play an important role. The heat transfer limited model describes the non-equilibrium phase transition processes occurring at interfaces, while the mass-diffusion limited model is employed to represent effects of non-condensable gases and multi-component mixture on V/C processes. Verification of the model and method employed in the multi-component V/C model of a multi-phase flow code was performed successfully by analyzing a series of multi-bubble condensation experiments. The applicability of the model to the accident analysis of LMRs is also discussed by comparison between steam and metallic vapor systems. (orig.)

  14. How shift scheduling practices contribute to fatigue amongst freight rail operating employees: Findings from Canadian accident investigations.

    Science.gov (United States)

    Rudin-Brown, Christina M; Harris, Sarah; Rosberg, Ari

    2018-02-01

    Canada's freight rail system moves 70% of the country's surface goods and almost half of all exports (RAC, 2016). These include dangerous goods. Anonymous survey of freight rail operating employees conducted by the Teamsters Canada Rail Conference (TCRC, 2014) revealed that many do not report getting enough sleep because of their work schedules, and that fatigue may be affecting their performance at work. Besides general impairments in attention and cognitive functioning, fatigue in railway operating employees slows reaction time to safety alarms and impairs conformance to train operating requirements. Shift scheduling practices can contribute to sleep-related fatigue by restricting sleep opportunities, requiring extended periods of wakefulness and by disrupting daily (circadian) rhythms. The primary goal of accident investigation is to identify causal and contributing factors so that similar occurrences can be prevented. A database search of Transportation Safety Board (TSB) rail investigation reports published in the 21-year period from 1995 to 2015 identified 18 that cited sleep-related fatigue of freight rail operating employees as a causal, contributing, or risk finding. This number represents about 20% of TSB rail investigations from the same period in which a human factors aspect of freight train activities was a primary cause. Exploration of accident themes suggests that management of fatigue and shift scheduling in the freight rail industry is a complex issue that is often not conducive to employee circadian rhythms and sleep requirements. It also suggests that current shift scheduling and fatigue management practices may be insufficient to mitigate the associated safety risk. Railway fatigue management systems that are based on the principles of modern sleep science are needed to improve scheduling practices and mitigate the ongoing safety risk. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

  15. Rupture behaviour of nuclear fuel cladding during loss-of-coolant accident

    Energy Technology Data Exchange (ETDEWEB)

    Suman, Siddharth [Department of Mechanical Engineering, Indian Institute of Technology Patna, Patna 801 103 (India); Khan, Mohd Kaleem, E-mail: mkkhan@iitp.ac.in [Department of Mechanical Engineering, Indian Institute of Technology Patna, Patna 801 103 (India); Pathak, Manabendra [Department of Mechanical Engineering, Indian Institute of Technology Patna, Patna 801 103 (India); Singh, R.N.; Chakravartty, J.K. [Mechanical Metallurgy Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India)

    2016-10-15

    Highlights: • Modelling of nuclear fuel cladding during loss-of-coolant accident transient. • Phase transformation, corrosion, and creep combined to evaluate burst criterion. • Effect of oxygen concentration on burst stress and burst strain. • Effect of heating rate, internal pressure fluctuation, shear modulus incorporated. - Abstract: A burst criterion model accounting the simultaneous phenomena of corrosion, solute-strengthening effect of oxygen, oxygen concentration based non-isothermal phase transformation, and thermal creep has been developed to predict the rupture behaviour of zircaloy-4 nuclear fuel cladding during the loss-of-coolant accident transients. The present burst criterion model has been validated using experimental data obtained from single-rod transient burst tests performed in steam environment. The predictions are in good agreement with the experimental results. A detailed computational analysis has been performed to assess the role of different parameters in the rupture of zircaloy cladding during loss-of-coolant accidents. This model reveals that at low temperatures, lower heating rates produce higher burst strains as oxidation effect is nominal. For high temperatures, the lower heating rates produce less burst strains, whereas higher heating rates yield greater burst strains.

  16. Radioactivity measurement for emergency or post-accident situations

    International Nuclear Information System (INIS)

    Champion, D.

    2010-01-01

    Specific objectives have to be achieved by radioactivity measurements during emergency or post-accident situations, which are different from those in normal situation. At the beginning of a nuclear emergency, few radioactivity data will be available, mainly from automatic monitoring systems implemented on the site or in its surrounding. Progressively, measurement programmes will be performed, in priority to get information on dose rate, atmospheric radionuclides and surface activities. In order to avoid excessive exposure of the measure teams, these programmes should be optimized. During early post-accident phase, different types of measurements will be done, following two main objectives: 1) to improve the assessment of the environmental contamination and people exposure; 2) for control purpose, to check the contamination of urban places, foodstuff and other products, compared to specific reference levels. The samples measurement in laboratories would be a challenge: usually, the laboratories involved in routine monitoring have to deal with very low level of radioactivity and a poor diversity of artificial radionuclides; after a reactor accident, the environmental samples to be measured would be more active and with a mixture of radionuclides (mainly with short or middle half-life) difficult to be characterized. So theses laboratories have to be trained and organised before any severe accident. (author)

  17. The work programme of NERIS in post-accident recovery.

    Science.gov (United States)

    Schneider, T; Andronopoulos, S; Camps, J; Duranova, T; Gallego, E; Gering, F; Isnard, O; Maître, M; Murith, C; Oughton, D; Raskob, W

    2018-01-01

    NERIS is the European platform on preparedness for nuclear and radiological emergency response and recovery. Created in 2010 with 57 organisations from 28 different countries, the objectives of the platform are to: improve the effectiveness and coherency of current approaches to preparedness; identify further development needs; improve 'know how' and technical expertise; and establish a forum for dialogue and methodological development. The NERIS Strategic Research Agenda is now structured with three main challenges: (i) radiological impact assessments during all phases of nuclear and radiological events; (ii) countermeasures and countermeasure strategies in emergency and recovery, decision support, and disaster informatics; and (iii) setting up a multi-faceted framework for preparedness for emergency response and recovery. The Fukushima accident has highlighted some key issues for further consideration in NERIS research activities, including: the importance of transparency of decision-making processes at local, regional, and national levels; the key role of access to environmental monitoring; the importance of dealing with uncertainties in assessment and management of the different phases of the accident; the use of modern social media in the exchange of information; the role of stakeholder involvement processes in both emergency and recovery situations; considerations of societal, ethical, and economic aspects; and the reinforcement of education and training for various actors. This paper emphasises the main issues at stake for NERIS for post-accident management.

  18. [Accidents and injuries at work].

    Science.gov (United States)

    Standke, W

    2014-06-01

    In the case of an accident at work, the person concerned is insured by law according to the guidelines of the Sozialgesetzbuch VII as far as the injuries have been caused by this accident. The most important source of information on the incident in question is the accident report that has to be sent to the responsible institution for statutory accident insurance and prevention by the employer, if the accident of the injured person is fatal or leads to an incapacity to work for more than 3 days (= reportable accident). Data concerning accidents like these are sent to the Deutsche Gesetzliche Unfallversicherung (DGUV) as part of a random sample survey by the institutions for statutory accident insurance and prevention and are analyzed statistically. Thus the key issues of accidents can be established and used for effective prevention. Although the success of effective accident prevention is undisputed, there were still 919,025 occupational accidents in 2011, with clear gender-related differences. Most occupational accidents involve the upper and lower extremities. Accidents are analyzed comprehensively and the results are published and made available to all interested parties in an effort to improve public awareness of possible accidents. Apart from reportable accidents, data on the new occupational accident pensions are also gathered and analyzed statistically. Thus, additional information is gained on accidents with extremely serious consequences and partly permanent injuries for the accident victims.

  19. Severe accident analysis methodology in support of accident management

    International Nuclear Information System (INIS)

    Boesmans, B.; Auglaire, M.; Snoeck, J.

    1997-01-01

    The author addresses the implementation at BELGATOM of a generic severe accident analysis methodology, which is intended to support strategic decisions and to provide quantitative information in support of severe accident management. The analysis methodology is based on a combination of severe accident code calculations, generic phenomenological information (experimental evidence from various test facilities regarding issues beyond present code capabilities) and detailed plant-specific technical information

  20. The radiological accident in Istanbul

    International Nuclear Information System (INIS)

    2000-01-01

    treatment of persons and assistance in the emergency response to the accident and the subsequent investigation. The IAEA is grateful to the Turkish authorities for their assistance in the preparation of this report