International Workshop on Industry Practices for Forecasting

CERN Document Server

Poggi, Jean-Michel; Brossat, Xavier

2015-01-01

The chapters in this volume stress the need for advances in theoretical understanding to go hand-in-hand with the widespread practical application of forecasting in industry. Forecasting and time series prediction have enjoyed considerable attention over the last few decades, fostered by impressive advances in observational capabilities and measurement procedures. On June 5-7, 2013, an international Workshop on Industry Practices for FORecasting was held in Paris, France, organized and supported by the OSIRIS Department of Electricité de France Research and Development Division. In keeping with tradition, both theoretical statistical results and practical contributions on this active field of statistical research and on forecasting issues in a rapidly evolving industrial environment are presented. The volume reflects the broad spectrum of the conference, including 16 articles contributed by specialists in various areas. The material compiled is broad in scope and ranges from new findings on forecasting in in...

Certifying Industrial Energy Efficiency Performance: AligningManagement, Measurement, and Practice to Create Market Value

Energy Technology Data Exchange (ETDEWEB)

McKane, Aimee; Scheihing, Paul; Williams, Robert

2007-07-01

, andhas no assurance of persistence, since champions may leave the company orbe reassigned after project completion.This paper presents an alternatescenario that builds on the body of expert knowledge concerning energymanagement best practices and the experience of industrial champions toengage industry in continuous energy efficiency improvement at thefacility rather than the individual level. Under this scenario,standardized methodologies for applying and validating energy managementbest practices in industrial facilities will be developed through aconsensus process involving both plant personnel and specializedconsultants and suppliers. The resulting protocols will describe aprocess or framework for conducting an energy savings assessment andverifying the results that will be transparent to policymakers, managers,and the financial community, and validated by a third-party organization.Additionally, a global dialogue is being initiated by the United NationsIndustrial Development Organization (UNIDO) concerning the development ofan international industrial energy management standard that would be ISOcompatible. The proposed scenario will combine the resulting standardwith the best practice protocols for specific energy systems (i.e.,steam, process heating, compressed air, pumping systems, etc.) to formthe foundation of a third party, performance-based certification programfor the overall industrial facility that is compatible with existingmanagement systems, including ISO 9001:2000, 14001:2004 and 6 Sigma. Thelong term goal of this voluntary, industry designed certification programis to develop a transparent, globally accepted system for validatingenergy efficiency projects and management practices. This system wouldcreate a verified record of energy savings with potential market valuethat could be recognized among sectors and countries.

A European Competence Framework for Industrial Pharmacy Practice in Biotechnology

NARCIS (Netherlands)

Atkinson, Jeffrey; Crowley, Pat; De Paepe, Kristien; Gennery, Brian; Koster, Andries|info:eu-repo/dai/nl/070975558; Martini, Luigi; Moffat, Vivien; Nicholson, Jane; Pauwels, Gunther; Ronsisvalle, Giuseppe; Sousa, Vitor; van Schravendijk, Chris; Wilson, Keith

2015-01-01

The PHAR-IN (“Competences for industrial pharmacy practice in biotechnology”) looked at whether there is a difference in how industrial employees and academics rank competences for practice in the biotechnological industry. A small expert panel consisting of the authors of this paper produced a

Technical writing practically unified through industry

Science.gov (United States)

Houston, L. S.

1981-01-01

General background details in the development of a university level technical writing program, based upon the writing tasks of the student's occupations, are summarized. Objectives and methods for unifying the courses of study with the needs of industry are discussed. Four academic course divisions, Industries Technologies, in which preparation and training are offered are: Animal, Horticulture, Agriculture, and Agricultural Business. Occupational competence is cited as the main goal for these programs in which technical writing is to be practically unified through industry. Course descriptions are also provided.

Makespan estimation and order acceptance in batch process industries when processing times are uncertain

NARCIS (Netherlands)

Ivanescu, V.C.; Fransoo, J.C.; Bertrand, J.W.M.

2002-01-01

Batch process industries are characterized by complex precedence relationships between operations, which renders the estimation of an acceptable workload very difficult. A detailed schedule based model can be used for this purpose, but for large problems this may require a prohibitive large amount

Acceptability of evidence-based neonatal care practices in rural Uganda - implications for programming.

Science.gov (United States)

Waiswa, Peter; Kemigisa, Margaret; Kiguli, Juliet; Naikoba, Sarah; Pariyo, George W; Peterson, Stefan

2008-06-21

Although evidence-based interventions to reach the Millennium Development Goals for Maternal and Neonatal mortality reduction exist, they have not yet been operationalised and scaled up in Sub-Saharan African cultural and health systems. A key concern is whether these internationally recommended practices are acceptable and will be demanded by the target community. We explored the acceptability of these interventions in two rural districts of Uganda. We conducted 10 focus group discussions consisting of mothers, fathers, grand parents and child minders (older children who take care of other children). We also did 10 key informant interviews with health workers and traditional birth attendants. Most maternal and newborn recommended practices are acceptable to both the community and to health service providers. However, health system and community barriers were prevalent and will need to be overcome for better neonatal outcomes. Pregnant women did not comprehend the importance of attending antenatal care early or more than once unless they felt ill. Women prefer to deliver in health facilities but most do not do so because they cannot afford the cost of drugs and supplies which are demanded in a situation of poverty and limited male support. Postnatal care is non-existent. For the newborn, delayed bathing and putting nothing on the umbilical cord were neither acceptable to parents nor to health providers, requiring negotiation of alternative practices. The recommended maternal-newborn practices are generally acceptable to the community and health service providers, but often are not practiced due to health systems and community barriers. Communities associate the need for antenatal care attendance with feeling ill, and postnatal care is non-existent in this region. Health promotion programs to improve newborn care must prioritize postnatal care, and take into account the local socio-cultural situation and health systems barriers including the financial burden. Male

Doctors and pharmaceutical industry.

Science.gov (United States)

Beran, Roy G

2009-09-01

The pharmaceutical industry is seen as seducing doctors by providing expensive gifts, subsidising travel and underwriting practice expenses in return for those doctors prescribing products that otherwise they would not use. This paints doctors in a very negative light; suggests doctors are available to the highest bidder; implies doctors do not adequately act as independent agents; and that doctors are driven more by self-interest than by patient needs. Similar practices, in other industries, are accepted as normal business behaviour but it is automatically assumed to be improper if the pharmaceutical industry supports doctors. Should the pharmaceutical industry withdraw educational grants then there would be: fewer scientific meetings; reduced attendance at conferences; limited post graduate education; and a depreciated level of maintenance of professional standards. To suggest that doctors prescribe inappropriately in return for largesse maligns their integrity but where there is no scientific reason to choose between different treatments then there can be little argument against selecting the product manufactured by a company that has invested in the doctor and the question arises as to whether this represents bad medicine? This paper will examine what constitutes non-professional conduct in response to inducements by the pharmaceutical industry. It will review: conflict of interest; relationships between doctors and pharma and the consequences for patients; and the need for critical appraisal before automatically decrying this relationship while accepting that there remain those who do not practice ethical medicine.

Best practices in incident investigation in the chemical process industries with examples from the industry sector and specifically from Nova Chemicals

International Nuclear Information System (INIS)

Morrison, Lisa M.

2004-01-01

This paper will summarize best practices in incident investigation in the chemical process industries and will provide examples from both the industry sector and specifically from NOVA Chemicals. As a sponsor of the Center for Chemical Process Safety (CCPS), an industry technology alliance of the American Institute of Chemical Engineers, NOVA Chemicals participates in a number of working groups to help develop best practices and tools for the chemical process and associated industries in order to advance chemical process safety. A recent project was to develop an update on guidelines for investigating chemical process incidents. A successful incident investigation management system must ensure that all incidents and near misses are reported, that root causes are identified, that recommendations from incident investigations identify appropriate preventive measures, and that these recommendations are resolved in a timely manner. The key elements of an effective management system for incident investigation will be described. Accepted definitions of such terms as near miss, incident, and root cause will be reviewed. An explanation of the types of incident classification systems in use, along with expected levels of follow-up, will be provided. There are several incident investigation methodologies in use today by members of the CCPS; most of these methodologies incorporate the use of several tools. These tools include: timelines, sequence diagrams, causal factor identification, brainstorming, checklists, pre-defined trees, and team-defined logic trees. Developing appropriate recommendations and then ensuring their resolution is the key to prevention of similar events from recurring, along with the sharing of lessons learned from incidents. There are several sources of information on previous incidents and lessons learned available to companies. In addition, many companies in the chemical process industries use their own internal databases to track recommendations from

Physician-industry relations. Part 1: individual physicians.

Science.gov (United States)

Coyle, Susan L

2002-03-05

This is part 1 of a 2-part paper on ethics and physician-industry relationships. Part 1 offers advice to individual physicians; part 2 gives recommendations to medical education providers and medical professional societies. Physicians and industry have a shared interest in advancing medical knowledge. Nonetheless, the primary ethic of the physician is to promote the patient's best interests, while the primary ethic of industry is to promote profitability. Although partnerships between physicians and industry can result in impressive medical advances, they also create opportunities for bias and can result in unfavorable public perceptions. Many physicians and physicians-in-training think they are impervious to commercial influence. However, recent studies show that accepting industry hospitality and gifts, even drug samples, can compromise judgment about medical information and subsequent decisions about patient care. It is up to the physician to judge whether a gift is acceptable. A very general guideline is that it is ethical to accept modest gifts that advance medical practice. It is clearly unethical to accept gifts or services that obligate the physician to reciprocate. Conflicts of interest can arise from other financial ties between physicians and industry, whether to outside companies or self-owned businesses. Such ties include honorariums for speaking or writing about a company's product, payment for participating in clinic-based research, and referrals to medical resources. All of these relationships have the potential to influence a physician's attitudes and practices. This paper explores the ethical quandaries involved and offers guidelines for ethical business relationships.

A European Competence Framework for Industrial Pharmacy Practice in Biotechnology

Directory of Open Access Journals (Sweden)

Jeffrey Atkinson

2015-07-01

Full Text Available The PHAR-IN (“Competences for industrial pharmacy practice in biotechnology” looked at whether there is a difference in how industrial employees and academics rank competences for practice in the biotechnological industry. A small expert panel consisting of the authors of this paper produced a biotechnology competence framework by drawing up an initial list of competences then ranking them in importance using a three-stage Delphi process. The framework was next evaluated and validated by a large expert panel of academics (n = 37 and industrial employees (n = 154. Results show that priorities for industrial employees and academics were similar. The competences for biotechnology practice that received the highest scores were mainly in: “Research and Development”, ‘“Upstream” and “Downstream” Processing’, “Product development and formulation”, “Aseptic processing”, “Analytical methodology”, “Product stability”, and “Regulation”. The main area of disagreement was in the category “Ethics and drug safety” where academics ranked competences higher than did industrial employees.

Acceptability of evidence-based neonatal care practices in rural Uganda – implications for programming

Directory of Open Access Journals (Sweden)

Kiguli Juliet

2008-06-01

Full Text Available Abstract Background Although evidence-based interventions to reach the Millennium Development Goals for Maternal and Neonatal mortality reduction exist, they have not yet been operationalised and scaled up in Sub-Saharan African cultural and health systems. A key concern is whether these internationally recommended practices are acceptable and will be demanded by the target community. We explored the acceptability of these interventions in two rural districts of Uganda. Methods We conducted 10 focus group discussions consisting of mothers, fathers, grand parents and child minders (older children who take care of other children. We also did 10 key informant interviews with health workers and traditional birth attendants. Results Most maternal and newborn recommended practices are acceptable to both the community and to health service providers. However, health system and community barriers were prevalent and will need to be overcome for better neonatal outcomes. Pregnant women did not comprehend the importance of attending antenatal care early or more than once unless they felt ill. Women prefer to deliver in health facilities but most do not do so because they cannot afford the cost of drugs and supplies which are demanded in a situation of poverty and limited male support. Postnatal care is non-existent. For the newborn, delayed bathing and putting nothing on the umbilical cord were neither acceptable to parents nor to health providers, requiring negotiation of alternative practices. Conclusion The recommended maternal-newborn practices are generally acceptable to the community and health service providers, but often are not practiced due to health systems and community barriers. Communities associate the need for antenatal care attendance with feeling ill, and postnatal care is non-existent in this region. Health promotion programs to improve newborn care must prioritize postnatal care, and take into account the local socio-cultural situation

Impact of design research on industrial practice tools, technology, and training

CERN Document Server

Lindemann, Udo

2016-01-01

Showcasing exemplars of how various aspects of design research were successfully transitioned into and influenced, design practice, this book features chapters written by eminent international researchers and practitioners from industry on the Impact of Design Research on Industrial Practice. Chapters written by internationally acclaimed researchers of design analyse the findings (guidelines, methods and tools), technologies/products and educational approaches that have been transferred as tools, technologies and people to transform industrial practice of engineering design, whilst the chapters that are written by industrial practitioners describe their experience of how various tools, technologies and training impacted design practice. The main benefit of this book, for educators, researchers and practitioners in (engineering) design, will be access to a comprehensive coverage of case studies of successful transfer of outcomes of design research into practice; as well as guidelines and platforms for successf...

Design Driven Innovation Practices in Design-preneur led Creative Industry

Directory of Open Access Journals (Sweden)

Philips Kembaren

2014-09-01

Full Text Available Design driven innovation has emerged to be an alternative way to generate sustainable competitive products or services. Previous research has recently revealed succesful practices of design driven innovation in various industries. However, little has been known about the creative companies that practice design driven innovation, especially in developing countries. This research investigates the existence and practices of design-driven innovation in the Indonesian creative industry. Based on interviews with the design-preneurs of the creative industry, one of the results of this study reveals how the Indonesian creative industry creates new meanings that are embedded into new products. Based on the identification, a framework to create new meaningsis resulted which consists of a set of key processes, such as sensing, sensemaking, specifying, setting up and storytelling. The practical contribution of this research is that this identified framework can be adopted by any creative companies interested in improving their innovation capability.

Quantification practices in the nuclear industry

International Nuclear Information System (INIS)

1986-01-01

In this chapter the quantification of risk practices adopted by the nuclear industries in Germany, Britain and France are examined as representative of the practices adopted throughout Europe. From this examination a number of conclusions are drawn about the common features of the practices adopted. In making this survey, the views expressed in the report of the Task Force on Safety Goals/Objectives appointed by the Commission of the European Communities, are taken into account. For each country considered, the legal requirements for presentation of quantified risk assessment as part of the licensing procedure are examined, and the way in which the requirements have been developed for practical application are then examined. (author)

Sustainable supply chain management practices in Indian automotive industry

DEFF Research Database (Denmark)

Mathivathanan, Deepak; Kannan, Devika; Haq, A. Noorul

2018-01-01

As one of the largest manufacturing sectors, the automotive industry has a deep impact on the society and environment. Automotive products provide mobility to millions and create jobs, but also threaten the environment. Consumer pressure, government regulations, and stakeholder demands for a comp......As one of the largest manufacturing sectors, the automotive industry has a deep impact on the society and environment. Automotive products provide mobility to millions and create jobs, but also threaten the environment. Consumer pressure, government regulations, and stakeholder demands...... into the traditional supply chain and that help an industry shift towards a sustainable supply chain are called SSCM practices. Firms have difficulty identifying the most useful practices and learning how these practices impact each other. Unfortunately, no existing research has studied the interrelated influences...... stakeholder perspectives are identified. The results reveal that management commitment towards sustainability and incorporating the triple bottom line approach in strategic decision making are the most influential practices for implementing the sustainable supply chain management. This study provides...

IMPROVING QUALITY OF WORK LIFE THROUGH ELECTROPHYSIOLOGY: AN IDEA ACCEPTED BY INDUSTRY

Directory of Open Access Journals (Sweden)

Evanthia Giagloglou

2015-12-01

Full Text Available Quality of Work Life (QWL and Occupational Health and Safety (OHS are two interconnected and important human needs. Modern industry shows a clear will for improving QWL and OHS, nevertheless, existent automatization and technological advances may negatively influence employees' wellbeing and result as triggers to their health deterioration. Subjective measures of employees workload can help, however, the lack of objectivity may be an issue. Improvement of working life needs objective measures. There is technology for measuring objectively employees' psychophysiology, but is considered to interfere with the flexibility needed for performing working tasks. Today electrophysiological methods require minimal dimensions, are wireless connected, allow movement and are proved to be useful in capturing psychophysical wellbeing. This study shows that the industry is ready to accept electrophysiological measures for monitoring and improving the employees' wellbeing.

Charter of good practices in industrial radiography

International Nuclear Information System (INIS)

2010-01-01

This document describes good practices in the field of industrial radiography. After having presented the main prevention and radiation protection principles, the actors inside and outside of the company, and actors intervening during an operation subcontracting in industrial radiography, this report analyzes the activity: prerequisites for work preparation, prevention coordination, work preparation, transportation, work achievement, return on experience. It addresses personnel training and information, and the dosimetric and medical monitoring of technicians in industrial radiography. Some aspects are addressed in appendix: principles (justification, optimization, and limitation), regulations, intervention form, exposure form, and so on

Empirical Analysis of Green Supply Chain Management Practices in Indian Automobile Industry

Science.gov (United States)

Luthra, S.; Garg, D.; Haleem, A.

2014-04-01

Environmental sustainability and green environmental issues have an increasing popularity among researchers and supply chain practitioners. An attempt has been made to identify and empirically analyze green supply chain management (GSCM) practices in Indian automobile industry. Six main GSCM practices (having 37 sub practices) and four expected performance outcomes (having 16 performances) have been identified by implementing GSCM practices from literature review. Questionnaire based survey has been made to validate these practices and performance outcomes. 123 complete questionnaires were collected from Indian automobile organizations and used for empirical analysis of GSCM practices in Indian automobile industry. Descriptive statistics have been used to know current implementation status of GSCM practices in Indian automobile industry and multiple regression analysis has been carried out to know the impact on expected organizational performance outcomes by current GSCM practices adopted by Indian automobile industry. The results of study suggested that environmental, economic, social and operational performances improve with the implementation of GSCM practices. This paper may play an important role to understand various GSCM implementation issues and help practicing managers to improve their performances in the supply chain.

"But doctors do it...": nurses' views of gifts and information from the pharmaceutical industry.

Science.gov (United States)

Jutel, Annemarie; Menkes, David B

2009-06-01

Most nurses, like their physician counterparts, lack education regarding pharmaceutical marketing strategies, and little is known of their beliefs and practices regarding this industry. Nurses are increasingly targeted by pharmaceutical companies as they become more involved in prescription and as policies restrict pharmaceutical companies' contact with physicians. To assess nurses' beliefs and reported practices concerning pharmaceutical marketing and sponsorship strategies. We conducted parallel Web- and paper-based surveys of a sample of senior registered nurses employed by government-funded health boards in 2 regions of New Zealand to explore their contact with the pharmaceutical industry as well as their beliefs and practices regarding information, gifts, and sponsorship provided by pharmaceutical companies. Returns were tested using Fisher's exact test to determine consistency in response between regions. Results for key outcome variables, including attitude toward the value of industry-derived information, were analyzed by region and in aggregate. Most nurses had contact with pharmaceutical sales representatives (69/106), accepted gifts from representatives (79/105), and believed information from the pharmaceutical industry probably improved their practice (71/106). Half believed that they would be able to detect misleading information if it were present, and 35% believed that accepting gifts and sponsorship was ethically acceptable. We found positive associations between the belief that information from the industry improved practice and reported acceptance of conference funding (OR 3.63; 95% CI 1.41 to 11.55), free food (OR 3.24; 95% CI 2.03 to 7.55), or gifts (OR 3.52; 95% CI 1.38 to 8.95). Nurses generally acknowledge the presence of pharmaceutical marketing in the hospital and the ethical challenges it presents; nonetheless, they also generally accept marketing gifts and may underestimate both the ethical challenges and their own susceptibility to

Industrial Relations and Firm Behavior: Informal Labor Practices in the West Coast Longshore Industry.

Science.gov (United States)

Finlay, William

1987-01-01

Considers industrial relations policies and practices of stevedore firms in the West Coast longshore industry in terms of the social worker, worker-resource, and institutional theories. Subsidiary firms were more lenient in contract interpretation and more competitive in recruitment, supporting the worker-resource theory. Includes 2 tables and 33…

The vector of the tobacco epidemic: tobacco industry practices in low and middle-income countries.

Science.gov (United States)

Lee, Sungkyu; Ling, Pamela M; Glantz, Stanton A

2012-03-01

To understand transnational tobacco companies' (TTCs) practices in low and middle-income countries which serve to block tobacco-control policies and promote tobacco use. Systematic review of published research on tobacco industry activities to promote tobacco use and oppose tobacco-control policies in low and middle-income countries. TTCs' strategies used in low and middle-income countries followed four main themes-economic activity; marketing/promotion; political activity; and deceptive/manipulative activity. Economic activity, including foreign investment and smuggling, was used to enter new markets. Political activities included lobbying, offering voluntary self-regulatory codes, and mounting corporate social responsibility campaigns. Deceptive activities included manipulation of science and use of third-party allies to oppose smoke-free policies, delay other tobacco-control policies, and maintain support of policymakers and the public for a pro-tobacco industry policy environment. TTCs used tactics for marketing, advertising, and promoting their brands that were tailored to specific market environments. These activities included direct and indirect tactis, targeting particular populations, and introducing new tobacco products designed to limit marketing restrictions and taxes, maintain the social acceptability of tobacco use, and counter tobacco-control efforts. TTCs have used similar strategies in high-income countries as these being described in low and middle-income countries. As required by FCTC Article 5.3, to counter tobacco industry pressures and to implement effective tobacco-control policies, governments and health professionals in low and middle-income countries should fully understand TTCs practices and counter them.

A Study on How Industrial Pharmacists Rank Competences for Pharmacy Practice: A Case for Industrial Pharmacy Specialization

Directory of Open Access Journals (Sweden)

Jeffrey Atkinson

2016-02-01

Full Text Available This paper looks at the way in which industrial pharmacists rank the fundamental competences for pharmacy practice. European industrial pharmacists (n = 135 ranked 68 competences for practice, arranged into 13 clusters of two types (personal and patient care. Results show that, compared to community pharmacists (n = 258, industrial pharmacists rank competences centering on research, development and production of drugs higher, and those centering on patient care lower. Competences centering on values, communication skills, etc. were ranked similarly by the two groups of pharmacists. These results are discussed in the light of the existence or not of an “industrial pharmacy” specialization.

Wind energy and social acceptability

International Nuclear Information System (INIS)

Feurtey, E.

2008-01-01

This document was prepared as part of a decentralized collaboration between Quebec and France to share knowledge regarding strategies and best practices in wind power development. It reviewed the social acceptance of Quebec's wind power industry, particularly at the municipal level. The wind industry is growing rapidly in Quebec, and this growth has generated many reactions ranging from positive to negative. The purpose of this joint effort was to describe decision making steps to developing a wind turbine array. The history of wind development in Quebec was discussed along with the various hardware components required in a wind turbine and different types of installations. The key element in implementing wind turbine arrays is to establish public acceptance of the project, followed by a good regulatory framework to define the roles and responsibilities of participants. The production of electricity from wind turbines constitutes a clean and renewable source of energy. Although it is associated with a reduction in greenhouse gas emissions, this form of energy can also have negative environmental impacts, including noise. The revenues generated by wind parks are important factors in the decision making process. Two case studies in Quebec were presented. refs., tabs., figs.

Environmental impact on nuclear industry and lessons therefrom for conventional industry

International Nuclear Information System (INIS)

Gupta, V.K.; Ganguly, A.K.

1978-01-01

All human endeavours to-date have resulted in short term and/or long term and sometimes, in irreversible impact on the environment. The awareness to protect the environment became obvious only when the deleterious effects started getting manifest and recognised. Nuclear power industry has approached the problem of keeping the environmental impact due to its operation within the acceptable limits in a systematic manner. The unique features of this approach are defining Maximum Acceptable Site Burden (MASB) at a given site for normal operation of the plant and also defining acceptable risk to the population around installations due to very low probable accident conditions in the installation. The study of the characteristics of the environment during the preoperational phase is undertaken to assess the recipient capacity of the environment and specify acceptable discharge levels of toxins. The impact of the operation of installation is evaluated throughout its life time so that corrective actions could be initiated before perceptible deleterious effects could assume unmanageable dimensions. This is done through well organised laboratories operating at the site of major nuclear installations. Some of the areas where these practices could be usefully adopted in the non-nuclear industries are pointed out. (author)

The Practice of Industrial Policy

DEFF Research Database (Denmark)

Much of the information relevant to policy formulation for industrial development is held by the private sector, not by public officials. There is, therefore, fairly broad agreement in the development literature that some form of structured engagement—often referred to as close or strategic...... of poverty reduction. In 2014, the Korea International Cooperation Agency (KOICA) and United Nations University World Institute for Development Economics Research (UNU-WIDER) launched a joint research project: The Practice of Industrial Policy. The aim is to help African policy makers develop better...... coordination between public and private sectors in order to identify the constraints to faster structural transformation and design, implement, and monitor policies to remove them. This book, written by national researchers and international experts, presents the results of that research by combining a set...

Food Safety Practices in the Egg Products Industry.

Science.gov (United States)

Viator, Catherine L; Cates, Sheryl C; Karns, Shawn A; Muth, Mary K; Noyes, Gary

2016-07-01

We conducted a national census survey of egg product plants (n = 57) to obtain information on the technological and food safety practices of the egg products industry and to assess changes in these practices from 2004 to 2014. The questionnaire asked about operational and sanitation practices, microbiological testing practices, food safety training for employees, other food safety issues, and plant characteristics. The findings suggest that improvements were made in the industry's use of food safety technologies and practices between 2004 and 2014. The percentage of plants using advanced pasteurization technology and an integrated, computerized processing system increased by almost 30 percentage points. Over 90% of plants voluntarily use a written hazard analysis and critical control point (HACCP) plan to address food safety for at least one production step. Further, 90% of plants have management employees who are trained in a written HACCP plan. Most plants (93%) conduct voluntary microbiological testing. The percentage of plants conducting this testing on egg products before pasteurization has increased by almost 30 percentage points since 2004. The survey findings identify strengths and weaknesses in egg product plants' food safety practices and can be used to guide regulatory policymaking and to conduct required regulatory impact analysis of potential regulations.

Does Technology Acceptance Change the Way from CRM to Customer Loyalty?: An Empirical Study on the Banking Industry

OpenAIRE

Yi-Yuan Liu

2010-01-01

This study explores the moderating effect of technology acceptance on the relationship between customer relationship management (CRM) in terms of distribution and tailor-made functions and customer loyalty in the banking industry. The author uses LISREL two-group path analysis to find the variances between high and low technology acceptance. Data collected from the customers of nine retail banks show that commitments have a mediating effect on the relationship between the tailor-made function...

Industry best practices for the software development life cycle

Science.gov (United States)

2007-11-01

In the area of software development, there are many different views of what constitutes a best practice. The goal of this project was to identify a set of industry best practice techniques that fit the needs of the Montana Department of Transportatio...

77 FR 45357 - Draft Guidance for Industry and Food and Drug Administration Staff; Acceptance and Filing Review...

Science.gov (United States)

2012-07-31

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-D-0524] Draft Guidance for Industry and Food and Drug Administration Staff; Acceptance and Filing Review for Premarket Approval Applications; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice...

78 FR 101 - Guidance for Industry and Food and Drug Administration Staff; Acceptance and Filing Reviews for...

Science.gov (United States)

2013-01-02

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-D-0524] Guidance for Industry and Food and Drug Administration Staff; Acceptance and Filing Reviews for Premarket Approval Applications; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The...

Acceptance and marketability of the food irradiation technology

International Nuclear Information System (INIS)

Sivinski, J.S.

1985-01-01

The food irradiation technology has been struggling for forty years for acceptance and utilization. The issue of consumer acceptance is addressed and judged not to be the critical factor in terms of priority and timing. The producing/processing marketing industries must first accept the technology for valid business or social reasons. If they become convinced that they cannot afford to pass up the technology, they will accept the process and offer irradiated products. These industries understand public acceptance and use professionals in market development and advertising to achieve consumption of their products. Consumer acceptance can best be developed by the food industry, while the research and development community, in concert with national and international agencies, can and should provide the industry with every assistance in reaching a consensus on the validity of food irradiation as an appropriate and useful technology

ADAPTIVE REUSE FOR NEW SOCIAL AND MUNICIPAL FUNCTIONS AS AN ACCEPTABLE APPROACH FOR CONSERVATION OF INDUSTRIAL HERITAGE ARCHITECTURE IN THE CZECH REPUBLIC

Directory of Open Access Journals (Sweden)

Oleg Fetisov

2016-04-01

Full Text Available The present paper deals with a problem of conservation and adaptive reuse of industrial heritage architecture. The relevance and topicality of the problem of adaptive reuse of industrial heritage architecture for new social and municipal functions as the conservation concept are defined. New insights on the typology of industrial architecture are reviewed (e. g. global changes in all European industry, new concepts and technologies in manufacturing, new features of industrial architecture and their construction and typology, first results of industrialization and changes in the typology of industrial architecture in post-industrial period. General goals and tasks of conservation in context of adaptive reuse of industrial heritage architecture are defined (e. g. historical, architectural and artistic, technical. Adaptive reuse as an acceptable approach for conservation and new use is proposed and reviewed. Moreover, the logical model of adaptive reuse of industrial heritage architecture as an acceptable approach for new use has been developed. Consequently, three general methods for the conservation of industrial heritage architecture by the adaptive reuse approach are developed: historical, architectural and artistic, technical. Relevant functional methods' concepts (social concepts are defined and classified. General beneficial effect of the adaptive reuse approach is given. On the basis of analysis results of experience in adaptive reuse of industrial architecture with new social functions general conclusions are developed.

Strategy and business development practices in Danish constrution industry SMEs

DEFF Research Database (Denmark)

Thuesen, Christian Langhoff; Koch, Christian; Nielsen, Jesper Salling

2010-01-01

practices. 19 qualitative interviews have been conducted in total representing architects, engineering companies, contractors and subcontractors. Based on an in-depth analysis of this empirical material, the study finds: (1) he market is characterized by a typical “red ocean” environment, where...... the companies compete on their overhead rather than their ability to reduce production cost and create value. (2) the companies have a reactive practice towards development, where they try to follow the development in the market rather than shaping their own market. (3) their approach towards strategy...... development represents an important but unacknowledged practice for innovation of the building industry and suggests that strategy processes should be facilitated and subject to more detailed research in order to escape the present unhealthy market practices in the construction industry....

Probabilistic Requirements (Partial) Verification Methods Best Practices Improvement. Variables Acceptance Sampling Calculators: Empirical Testing. Volume 2

Science.gov (United States)

Johnson, Kenneth L.; White, K. Preston, Jr.

2012-01-01

The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. In this paper, the results of empirical tests intended to assess the accuracy of acceptance sampling plan calculators implemented for six variable distributions are presented.

A practicable signal processing algorithm for industrial nuclear instrument

International Nuclear Information System (INIS)

Tang Yaogeng; Gao Song; Yang Wujiao

2006-01-01

In order to reduce the statistical error and to improve dynamic performances of the industrial nuclear instrument, a practicable method of nuclear measurement signal processing is developed according to industrial nuclear measurement features. The algorithm designed is implemented with a single-chip microcomputer. The results of application in (radiation level gauge has proved the effectiveness of this method). (authors)

Identifying industrial best practices for the waste minimization of low-level radioactive materials

Energy Technology Data Exchange (ETDEWEB)

Levin, V.

1996-04-01

In US DOE, changing circumstances are affecting the management and disposal of solid, low-level radioactive waste (LLW). From 1977 to 1991, the nuclear power industry achieved major reductions in solid waste disposal, and DOE is interested in applying those practices to reduce solid waste at DOE facilities. Project focus was to identify and document commercial nuclear industry best practices for radiological control programs supporting routine operations, outages, and decontamination and decommissioning activities. The project team (DOE facility and nuclear power industry representatives) defined a Work Control Process Model, collected nuclear power industry Best Practices, and made recommendations to minimize LLW at DOE facilities.

A COMPARISON OF GREEN SUPPLY CHAIN MANAGEMENT PRACTICES AMONG INDUSTRIES SECTORS IN CHINA

Science.gov (United States)

Sun, Ying; Miyadera, Tetsuhiko; Fujita, Tsuyoshi

This paper aims to examine the differences of Green supply chain management (GSCM) implementation among chemical, automobile and machinery industries in China based on a questionnaire survey designed by Industrial Ecology at two industrial parks in Shenyang city. Exploratory factor analysis and one way analysis of variance (ANOVA) were used to analyze the data. The main result was that the GSCM practices of the three industries are still at a beginning stage. The level of GSCM practices of automobile industry (promoted by international market competition) was higher than those of chemical and machinery industry (promoted by domestic laws and policies).

Energy Efficiency Practices: Assessment of Ohrid Hotel Industry

OpenAIRE

Petrevska, Biljana; Cingoski, Vlatko

2016-01-01

This paper provides information on the extent how the hotel industry in Ohrid meets the energy efficiency practices in terms of the current level of involvement. By undertaking an online survey in three, four and five-star hotels, the study assesses the attitudes and willingness of hotel managers concerning applying energy efficiency and environmental protection concepts and practices. Moreover, it investigates various determinants of energy consumption, like: solid waste management, resource...

Metallurgical engineering and inspection practices in the chemical process industries

International Nuclear Information System (INIS)

Moller, G.E.

1987-01-01

The process industries, in particular the petroleum refining industry, adopted materials engineering and inspection (ME and I) practices years ago and regularly updated them because they were faced with the handling and refining of flammable, toxic, and corrosive feed stocks. These industries have a number of nonproprietary techniques and procedures, some of which may be applicable in the nuclear power generation field. Some specific inspection and engineering techniques used by the process industries within the framework of the guidelines for inspections and worthy of detailed description include the following: (1) sentry drilling or safety drilling of piping subject to relatively uniform corrosion, such as feedwater heater piping, steam piping, and extraction steam piping; (2) on-stream radiography for thickness measurement and detection of unusual conditions - damaged equipment such as valve blockage; (3) critical analysis of the chemical and refining processes for the relative probability of corrosion; (4) communication of valuable experience within the industry; (5) on-stream ultrasonic thickness testing; and (6) on-stream and off-stream crack and flaw detection. The author, trained in the petroleum refining industry but versed in electric utilities, pulp and paper, chemical process, marine, mining, water handling, waste treatment, and geothermal processes, discusses individual practices of these various industries in the paper

Innovation Level of Sustainable Practices Adopted in Industrial Enterprises

Directory of Open Access Journals (Sweden)

Simone Sehnem

2016-07-01

Full Text Available This research aimed to identify the level of innovation of sustainable practices by industrial companies. This is a descriptive study that made use of a questionnaire answered by 50 industrial companies. The results show that environmental practices at full level by 68% of businesses are monitoring the risks and opportunities for the organization's activities due to climate change; 56% of companies surveyed are waste separation; followed by the realization of related health and safety training at work in 52% of cases surveyed; and 48% monitoring and recording of injuries, the injury rate, the rate of occupational diseases, lost days, absenteeism and number of work-related fatalities for all workers. Among the practices adopted not stand out incineration (burning mass (80% of companies surveyed; hiring indigenous and tribal employees (68%; composting (64% and use of surface water in the process. Therefore, the study contributed to the disclosure cleaner called production innovations and also pipe end technologies. Some social practices that signal a commitment of the organizations with human resources and the humanization and also economical focused on continuous improvement.

Current nuclear industry practices with regard to the integration of surveillances

International Nuclear Information System (INIS)

Stewart, M.; Smith, C.

1992-04-01

Commercial nuclear industry practices regarding the integration of technical specification (TS) surveillance and maintenance activities are identified in this report. A questionnaire was developed and used to obtain current industry practices from NRC Regional personnel and INEL engineers with utility experience. Some of these practices indicate that the scheduling of TS surveillance and maintenance items could be more effectively coordinated. Also, must utilities do not formally consider risk implications when they are scheduling maintenance. Methodologies and approaches for proposing and evaluating changes to improve the integration of TS surveillance and maintenance activities have been identified for planned future work

Implementation of the safety assessment in the practice of industrial radiography

International Nuclear Information System (INIS)

Alfonso Pallarés, C.; Pérez Reyes, Y.

2015-01-01

The CNSN as regulatory authority has regulatory control processes based on regulations, permits, inspections and limitation to ensure the supervision and control of the practice of industrial radiography. On the other hand in the light of the new regulations approved and being implemented such as: Resolution 334/2011 CITMA 'Regulation on Notification and authorization of practices and activities associated with the use of ionizing radiation sources' and Resolution 17 / 2012, Security Guide: Security Assessment Practices and Activities associated with the use of ionizing radiation (recommendatory), it is necessary for compliance with regulatory requirements concerning the safety assessment. Since 2009 it has been applied this experience in different medical practices and industry, providing a systematic and consistent basis, to the safety assessment of all facilities and activities, which has helped increase the confidence that has been achieved an adequate level of security. The work was able to identify that there is a group of barriers operating in the risk reduction in various accident sequences and therefore have a relative importance in risk reduction, recommendations in this regard to improve the program management of safety in the practice of industrial radiography. [es

Physician Acceptance of a Computerized Outpatient Medication System in a Teaching Hospital Group Practice

OpenAIRE

Blish, Christi; Proctor, Rita; Fletcher, Suzanne W.; O'Malley, Michael

1983-01-01

As part of a new automated ambulatory medical record, a computerized outpatient medication system was developed for a teaching hospital general medicine group practice. Seven months after its implementation, the system was evaluated to determine physician acceptance and approval. Practice physicians were surveyed, and 94% of the respondents approved of the system. Over 90% thought that the computerized system had improved the completeness and accuracy of medication information as well as thei...

The Evaluation of Industry Practical of Mechanical Engineering in Vocational Education: A CIPP Model Approach

Science.gov (United States)

Kamaludin, M.; Munawar, W.; Mahdan, D.; Simanjuntak, M. V.; Wendi, H. F.

2018-02-01

The learning system is not only studied on campus but also practicing in the world of work. Industry Practical aims to enable students to develop their skills in accordance with the real world of work. To know the success of the implementation of industry practical program then held evaluation. The evaluation of the program in this study used the CIPP evaluation approach (Context, Input, Process, Product). The purpose of this research is to know the extent of achievement and success of industry practical program at vocational school in Bandung with descriptive research method using mix method approach. The sample in this research is students majoring in mechanical engineering in the city of Bandung who have done industry practical.

Human Resource Management Practice Tourism and Hotel Industry

Directory of Open Access Journals (Sweden)

Al Hrou S.A.

2014-01-01

Full Text Available Due to the importance of human resources management (HRM in promoting competitiveness in tourism and hotel industry, this review intend to enhance the understanding of practical issues of HRM more importantly since it involve organizing the management of human resources, with respect to accomplishment of organizational objective further more it shows that the issues either related to external factors, which include technological change, legislation and regulation, and national culture, globalization, or internal factors including size, industry and sector characteristic and structure of an organization, strategy and past practice of HRM. On the issue of human resources capability training, this research review recommend provision of array of opportunity for capability building and conducive working environment to promote productivity. Also worth considering, employee, employer relationship, Other variables such as attitude and productivity of employees, relationship between employees and employers, increase and decrease in financial assets should be taken into account.

77 FR 48159 - Draft Guidance for Industry and Food and Drug Administration Staff; Refuse To Accept Policy for...

Science.gov (United States)

2012-08-13

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-D-0523] Draft Guidance for Industry and Food and Drug Administration Staff; Refuse To Accept Policy for 510(k)s; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug...

Undue industry influences that distort healthcare research, strategy, expenditure and practice: a review.

Science.gov (United States)

Stamatakis, Emmanuel; Weiler, Richard; Ioannidis, John P A

2013-05-01

Expenditure on industry products (mostly drugs and devices) has spiraled over the last 15 years and accounts for substantial part of healthcare expenditure. The enormous financial interests involved in the development and marketing of drugs and devices may have given excessive power to these industries to influence medical research, policy, and practice. Review of the literature and analysis of the multiple pathways through which the industry has directly or indirectly infiltrated the broader healthcare systems. We present the analysis of the industry influences at the following levels: (i) evidence base production, (ii) evidence synthesis, (iii) understanding of safety and harms issues, (iv) cost-effectiveness evaluation, (v) clinical practice guidelines formation, (vi) healthcare professional education, (vii) healthcare practice, (viii) healthcare consumer's decisions. We located abundance of consistent evidence demonstrating that the industry has created means to intervene in all steps of the processes that determine healthcare research, strategy, expenditure, practice and education. As a result of these interferences, the benefits of drugs and other products are often exaggerated and their potential harms are downplayed, and clinical guidelines, medical practice, and healthcare expenditure decisions are biased. To serve its interests, the industry masterfully influences evidence base production, evidence synthesis, understanding of harms issues, cost-effectiveness evaluations, clinical practice guidelines and healthcare professional education and also exerts direct influences on professional decisions and health consumers. There is an urgent need for regulation and other action towards redefining the mission of medicine towards a more objective and patient-, population- and society-benefit direction that is free from conflict of interests. © 2013 Stichting European Society for Clinical Investigation Journal Foundation. Published by Blackwell Publishing Ltd.

Total quality management practices in Malaysia healthcare industry

Science.gov (United States)

Ahmad, Md Fauzi; Nee, Phoi Soo; Nor, Nik Hisyamudin Muhd; Wei, Chan Shiau; Hassan, Mohd Fahrul; Hamid, Nor Aziati Abdul

2017-10-01

The aim of total quality management (TQM) is to achieve customer satisfaction. Healthcare industry is very important in Malaysia for providing good healthcare services to public. However, failure to improve quality and efficiency is a big challenge in a healthcare industry in order to increase quality healthcare services. The objectives of this research are to identify the extent level of TQM implementation; and to determine the impact of TQM implementation on business sustainable in healthcare industry. Quantitative approach has been chosen as the methodology of this study. The survey respondents targeted in this research are staffs in Malaysia private clinic. 70 respondents have participated in this research. Data were analysed by Statistical Package Social Science (SPSS). Analysis result showed that there was a positive significant relationship between TQM practices and business sustainable (r=0.774, Prelationship with business sustainable factors. The findings of this research will help healthcare industry to understand a better and deeper valuable information on the impact of TQM implementation towards business sustainable in Malaysia healthcare industry.

Fraud and Fraudulent Practices in Nigeria Banking Industry ...

African Journals Online (AJOL)

The paper reviews the various forms of fraudulent practice their impact and inducement for various reforms in banking industry. It also mentions various legislations targeted at reducing fraud and introducing some forms of control and reporting systems. Various theories of fraud are examined and detailed analysis of various ...

A Systematic Analysis of Functional Safety Certification Practices in Industrial Robot Software Development

Directory of Open Access Journals (Sweden)

Tong Xie

2017-01-01

Full Text Available For decades, industry robotics have delivered on the promise of speed, efficiency and productivity. The last several years have seen a sharp resurgence in the orders of industrial robots in China, and the areas addressed within industrial robotics has extended into safety-critical domains. However, safety standards have not yet been implemented widely in academia and engineering applications, particularly in robot software development. This paper presents a systematic analysis of functional safety certification practices in software development for the safety-critical software of industrial robots, to identify the safety certification practices used for the development of industrial robots in China and how these practices comply with the safety standard requirements. Reviewing from Chinese academic papers, our research shows that safety standards are barely used in software development of industrial robot. The majority of the papers propose various solutions to achieve safety, but only about two thirds of the papers refer to non-standardized approaches that mainly address the systematic level rather than the software development level. In addition, our research shows that with the development of artificial intelligent, an emerging field is still on the quest for standardized and suitable approaches to develop safety-critical software.

Assessment of application of 5S practices in ceramic industry

Directory of Open Access Journals (Sweden)

Danel Kleszcz

2017-10-01

Full Text Available Results of research connected with determining the degree of implementation of 5S practices in ceramics industry are discussed in this paper. Direct survey with employees of companies plus ex-pert interview was used in the research. A 21 point scale was used to assess the degree of implemen-tation the 5S practices at individual stages of the manufacturing process. The specificity of produc-tion in ceramics industry enforces maintaining the regime of cleanliness during production. The research revealed that the level of conscious implementation of the 5S practices in companies de-pends on the culture of organization and the degree of involvement of employees in the improvement actions in their company. The presented results are a part of the research aimed at determining refer-ence requirements for companies in terms of implementation and making use of the Lean Manage-ment (LM instruments.

Public acceptance of nuclear power

International Nuclear Information System (INIS)

Wildgruber, O.H.

1990-01-01

The lecture addresses the question why we need public acceptance work and provides some clues to it. It explains various human behaviour patterns which determine the basics for public acceptance. To some extent, the opposition to nuclear energy and the role the media play are described. Public acceptance efforts of industry are critically reviewed. Some hints on difficulties with polling are provided. The lecture concludes with recommendations for further public acceptance work. (author)

Acceptability and practicality of a Spanish translation of paediatric Gait Arms Legs and Spine (pGALS) in Peruvian children.

Science.gov (United States)

Abernethy, Katrina; Jandial, Sharmila; Hill, Lucy; Sánchez, Ernesto Salazar; Foster, Helen

2014-01-01

The paediatric Gait, Arms, Legs and Spine (pGALS) musculoskeletal examination tool is validated for use in school-aged English Speaking children and shown to be practical and effective in acute paediatric practice in the UK and Malawi. Our aim was to assess the acceptability and practicality of a Spanish translation of pGALS in an acute paediatric setting in Peru. Fifty-three school-aged children presenting to Hospital Regional de Loreto, Peru were recruited to undergo a pGALS examination using a Spanish translation of the instructions. The pGALS examination was completed in 92.5% (49/53), with the time taken (median 4.42 minutes) being acceptable to most parents (98.1%, 52/53). Most children (88.7%, 47/53), found the pGALS examination caused 'little' or 'no additional discomfort'. Using pGALS, significant findings were observed in 18/53 (34%) children; these related to fractures (4/18), hypermobility (4/18), infectious causes (5/18) and soft tissue trauma (5/18). Using this Spanish translation, pGALS assessment was practical, acceptable and effective in detecting musculoskeletal changes in many children.

Early Phase Process Evaluation: Industrial Practices

Directory of Open Access Journals (Sweden)

Zulfan Adi Putra

2016-09-01

Full Text Available Process route evaluation is a part of research and development (R&D works in an industrial chemical project life cycle. In this early phase, good process evaluation, including process synthesis and designs, provide guidance’s on the R&D project. The paper aimed to collect practical methods used in this early phase process route evaluation from author’s 10 years of industrial experiences.  The collected methods range from forward-backward process synthesis, functional process design, use of cost estimation, and applications of Monte Carlo simulation. Led by a good project management (e.g. via a stage-gate approach use of these methods have shown beneficial results. Some important results are strong arguments on whether or not the project will continue, as well as relevant technical and economic issues identified during this early phase process synthesis and design. Later on, these issues become guidance’s to the follow-up project, if it is continued.

Sustainable Manufacturing Practices in Malaysian Automotive Industry: Confirmatory Factor Analysis

OpenAIRE

Habidin, Nurul Fadly; Zubir, Anis Fadzlin Mohd; Fuz, Nursyazwani Mohd; Latip, Nor Azrin Md; Azman, Mohamed Nor Azhari

2015-01-01

Sustainable manufacturing practices (SMPs) have received enormous attention in current years as an effective solution to support the continuous growth and expansion of the automotive manufacturing industry. This reported study was conducted to examine confirmatory factor analysis for SMP such as manufacturing process, supply chain management, social responsibility, and environmental management based on automotive manufacturing industry. The results of confirmatory factor analysis show that fo...

46 CFR 28.73 - Accepted organizations.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Accepted organizations. 28.73 Section 28.73 Shipping... INDUSTRY VESSELS General Provisions § 28.73 Accepted organizations. An organization desiring to be designated by the Commandant as an accepted organization must request such designation in writing. As a...

The UK Nuclear Industry Code of Practice on Clearances and Exemptions

International Nuclear Information System (INIS)

Owen, D.

2004-01-01

In 2001, the major nuclear organisations in the United Kingdom started development of a document that would identify and facilitate consistent the application of good practice within the industry for clearing and sentencing of articles, substances and wastes which may be clean, or radioactive at very low levels below thresholds of regulatory control. The document includes: (i) Clarification of the industry's interpretation of legislation associated with the clearance and sentencing of articles, substances and wastes which are or have the potential to have been contaminated by radioactivity or activated by nuclear radiations; (ii) Industry agreement on what is considered to be the good practice where legislation is imprecise or unclear, (iii) A standard management framework, adopted by all organisations within the nuclear industry, that should justify safe and efficient clearance of potentially radioactive articles, substances and wastes; and (IV) Agreed guidance on the principles, processes and practices which should be followed for clearances and sentencing The Document mandates a system that allows articles and substances to be released from further control, where this is appropriate, using robust radiological protection principles. The need to avoid sentencing of clean materials as radioactive waste where this is not appropriate, the primacy of bulk, rather than surface radioactivity clearance criteria, and the need to disallow such clearances until all relevant legislation has been satisfied, are all clear principles contained within the document. An interim issue of the Code of Practice was issued in May 2003. This version has been formally adopted by all of the major users of radioactive material in the United Kingdom, and has two main objectives: -Trial use of the concepts at the working level, and - As a basis for further discussion with interested stakeholders. The paper summarises: - How the interim version of the Code of Practice was developed; - The

Industry Application Emergency Core Cooling System Cladding Acceptance Criteria Early Demonstration

Energy Technology Data Exchange (ETDEWEB)

Szilard, Ronaldo H. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Youngblood, Robert W. [FPoliSolutions LLC, Murrysville, PA (United States); Zhang, Hongbin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhao, Haihua [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bayless, Paul D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rabiti, Cristian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Alfonsi, Andrea [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Frepoli, Cesare [FPoliSolutions LLC, Murrysville, PA (United States); Yurko, Joseph P. [FPoliSolutions LLC, Murrysville, PA (United States); Swindlehurst, Gregg [GS Nuclear Consulting, Charlotte, NC (United States); Zoino, Angelo [Univ. of Rome Tor Vergata (Italy)

2015-09-01

The U. S. NRC is currently proposing rulemaking designated as “10 CFR 50.46c” to revise the loss-of-coolant-accident (LOCA)/emergency core cooling system (ECCS) acceptance criteria to include the effects of higher burnup on cladding performance as well as to address other technical issues. The NRC is also currently resolving the public comments with the final rule expected to be issued in April 2016. The impact of the final 50.46c rule on the industry may involve updating of fuel vendor LOCA evaluation models, NRC review and approval, and licensee submittal of new LOCA evaluations or re-analyses and associated technical specification revisions for NRC review and approval. The rule implementation process, both industry and NRC activities, is expected to take 4-6 years following the rule effective date. As motivated by the new rule, the need to use advanced cladding designs may be a result. A loss of operational margin may result due to the more restrictive cladding embrittlement criteria. Initial and future compliance with the rule may significantly increase vendor workload and licensee cost as a spectrum of fuel rod initial burnup states may need to be analyzed to demonstrate compliance. Consequently, there will be an increased focus on licensee decision making related to LOCA analysis to minimize cost and impact, and to manage margin. The proposed rule would apply to a light water reactor and to all cladding types.

Innovative quality management practices in the Dutch construction industry

NARCIS (Netherlands)

Bossink, B.A.G.

2002-01-01

Quality management practices do support the management of strategically important innoυation processes. This conclusion is based on empirical research in the Dutch construction industry. A large-scale innovative construction project is intensively studied during a three-year period. The quality

Waste management practices in Ontario`s workplaces: An emerging industrial ecology

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-09-01

Describes a study commissioned to evaluate employee attitudes and behaviours with respect to participation in workplace initiatives in waste diversion/reduction, to examine management initiatives related to waste diversion and reduction/recycling/reuse, and to report on Ontario Ministry of Environment & Energy activities related to industrial, commercial, and institutional (ICI) waste diversion activities. Linkages between management and employees, management and government, and ICI activities and government were also studied. The study methodology included a literature review, a series of interviews with key stakeholders, industry associations, and waste management companies, and a series of 12 case studies spanning major industrial sectors in Ontario. Issues addressed in the study include the factors that trigger waste diversion activities by ICI establishments, barriers to the initiation of waste diversion practices, and the social aspects of waste reduction/recycling/reuse practices.

Resolution 12/2004 Guideline for implementation of safety regulations in the practice of industrial radiography

International Nuclear Information System (INIS)

2004-01-01

1. This guide is intended to clarify, in relation to its application in practice Industrial Radiography, the provisions of: a) Joint Resolution CITMA-MINSAP, of December 15, 2002, Regulation: B asic Radiation Safety Standards , hereinafter Regulation NBS; b) Resolution No. 25/98 of CITMA Regulation. A uthorization Practices Associated with the use of ionizing radiation , hereinafter Resolution 25/98; c) Resolution 121/2000 CITMA Regulation: F or the Safe Transport of Radioactive materials , hereinafter Resolution 121/2000; and in d) Joint Resolution CITMA-MINSAP, Regulation: S election, Training and Authorization of personnel performing Employment Practices Associated Radiation Ionizing . 2. For the purposes of applying this Guide considers the practice of Industrial Radiography includes the following techniques: a) Industrial Radiography with use of gamma radiation sources; b) crawler radiography equipment; and c) Industrial Radiography with X-rays

Guide to request license for industrial X-rays practices

International Nuclear Information System (INIS)

2000-05-01

In this work the instructions it plows described to request license for practices it of industrial x-ray it continued. The instructions but important: they plows license type, purpose of the application, source and equipment, location of local the, program of radiological protection and security

Evaluation of Industry Relationships Among Authors of Otolaryngology Clinical Practice Guidelines.

Science.gov (United States)

Horn, Jarryd; Checketts, Jake Xavier; Jawhar, Omar; Vassar, Matt

2018-03-01

Financial relationships between physicians and industry have influence on patient care. Therefore, organizations producing clinical practice guidelines (CPGs) must have policies limiting financial conflicts during guideline development. To evaluate payments received by physician authors of otolaryngology CPGs, compare disclosure statements for accuracy, and investigate the extent to which the American Academy of Otolaryngology-Head and Neck Surgery complied with standards for guideline development from the Institute of Medicine (IOM). This cross-sectional analysis retrieved CPGs from the American Academy of Otolaryngology-Head and Neck Surgery Foundation that were published or revised from January 1, 2013, through December 31, 2015, by 49 authors. Data were retrieved from December 1 through 31, 2016. Industry payments received by authors were extracted using the Centers for Medicare & Medicaid Services Open Payments database. The values and types of these payments were then evaluated and used to determine whether self-reported disclosure statements were accurate and whether guidelines adhered to applicable IOM standards. The monetary amounts and types of payments received by physicians who author otolaryngology guidelines and the accuracy of disclosure statements. Of the 49 physicians in this sample, 39 (80%) received an industry payment. Twenty-one authors (43%) accepted more than $1000; 12 (24%), more than $10 000; 7 (14%), more than $50 000; and 2 (4%), more than $100 000. Mean (SD) financial payments amounted to $18 431 ($53 459) per physician. Total reimbursement for all authors was $995 282. Disclosure statements disagreed with the Open Payments database for 3 authors, amounting to approximately $20 000 among them. Of the 3 IOM standards assessed, only 1 was consistently enforced. Some CPG authors failed to fully disclose all financial conflicts of interest, and most guideline development panels and chairpersons had conflicts. In addition

Environmental practices of the auxiliary companies to the Spanish automobile industry

Science.gov (United States)

González-Torre, Pilar L.; González, Beatriz A.; Gupta, Surendra M.

2005-11-01

The automobile manufacturing industry plays a very important role in a country's economy. The importance of automobile manufacturing industry lies in its sheer size and complexity in terms of the direct and indirect influence it commands across many other industries. While millions of people are employed in the automobile manufacturing industry, it is estimated that more than two and half times that number are employed in the auxiliary companies that supply parts to the automobile manufacturing companies. The auxiliary companies represent a group of businesses of various sizes, types, and geographical locations, producing a vast variety of products ranging from the very simple to the extremely intricate. In this study, the current environmental practices of management in the core Spanish auxiliary companies that do business with the automobile manufacturing industry (and thus form a large part of the automobile manufacturing industry's supply chain) are investigated. We show that while automobile manufacturing companies are under scrutiny to become more and more environmentally friendly, not only at their manufacturing stage but also at their products' useful and EOL stages, there appears to be no such burden on the auxiliary companies. Our conclusion is based on an elaborate survey conducted during the fall of 2004 of Spanish auxiliary companies with questions about the characteristics, environmental practices and reverse logistics related activities carried out by the companies.

An Analysis of the Current Status of Media Reports about the social acceptance of nuclear industry

Energy Technology Data Exchange (ETDEWEB)

Lee, Ho Yeon; Lee, Jae Young [Handong University, Pohang (Korea, Republic of); Park, Wons Seok [SFRA, Daejeon (Korea, Republic of)

2016-05-15

The object of this paper is to analyze intensively media reports on nuclear energy to share information in information and technology centric society. As this study is not focus on special incident, but it is setting any period. So we established database on media report refer to nuclear industry and then we analysed them by social scientific method. This paper dealt with data construction, standard of data classification, data analysis method, continue to operate Wolsung 1 reactor and public acceptance.

An Analysis of the Current Status of Media Reports about the social acceptance of nuclear industry

International Nuclear Information System (INIS)

Lee, Ho Yeon; Lee, Jae Young; Park, Wons Seok

2016-01-01

The object of this paper is to analyze intensively media reports on nuclear energy to share information in information and technology centric society. As this study is not focus on special incident, but it is setting any period. So we established database on media report refer to nuclear industry and then we analysed them by social scientific method. This paper dealt with data construction, standard of data classification, data analysis method, continue to operate Wolsung 1 reactor and public acceptance

Analyzing solid waste management practices for the hotel industry

Directory of Open Access Journals (Sweden)

S.T. Pham Phu

2018-01-01

Full Text Available The current study aims to analyze waste characteristics and management practices of the hotel industry in Hoi An, a tourism city in the center of Vietnam. Solid wastes from 120 hotels were sampled, the face-to-face interviews were conducted, and statistical methods were carried out to analyze the data. The results showed that the mean of waste generation rate of the hotels was 2.28 kg/guest/day and strongly correlated to internal influencing factors such as the capacity, the price of the room, garden, and level of restaurant. The differences in waste generation rate of the hotels were proved to be statistically significant. The higher the scale of hotels, the higher the waste generation rate. Moreover, the waste composition of the hotels was identified by 58.5% for biodegradable waste, 25.8% for recyclables and 15.7% for others. The relative differences in the waste composition of the hotels by climate, the features of hotels, and the types of the guest were explained. Whereby, the higher size of the hotels, the higher percentage of biodegradable and less proportion of recyclable waste. Also, this study revealed that the implementation status of waste management practices of the hoteliers initially reaped quite positive achievements with 76% for sorting, 39% for recycling, 29% for reduction, and 0.8% for composting. The rate of waste management practices was proportional to the scale of the hotel. This study provided information on waste management practice of hotel industry and contributed to the overall assessment of municipal solid waste management practices of Hoi An city.

Feasibility, acceptability and effectiveness of an online alternative to face-to-face consultation in general practice: a mixed-methods study of webGP in six Devon practices.

Science.gov (United States)

Carter, Mary; Fletcher, Emily; Sansom, Anna; Warren, Fiona C; Campbell, John L

2018-02-15

To evaluate the feasibility, acceptability and effectiveness of webGP as piloted by six general practices. Mixed-methods evaluation, including data extraction from practice databases, general practitioner (GP) completion of case reports, patient questionnaires and staff interviews. General practices in NHS Northern, Eastern and Western Devon Clinical Commissioning Group's area approximately 6 months after implementing webGP (February-July 2016). Six practices provided consultations data; 20 GPs completed case reports (regarding 61 e-consults); 81 patients completed questionnaires; 5 GPs and 5 administrators were interviewed. Attitudes and experiences of practice staff and patients regarding webGP. WebGP uptake during the evaluation was small, showing no discernible impact on practice workload. The completeness of cross-sectional data on consultation workload varied between practices.GPs judged 41/61 (72%) of webGP requests to require a face-to-face or telephone consultation. Introducing webGP appeared to be associated with shifts in responsibility and workload between practice staff and between practices and patients.81/231 patients completed a postal survey (35.1% response rate). E-Consulters were somewhat younger and more likely to be employed than face-to-face respondents. WebGP appeared broadly acceptable to patients regarding timeliness and quality/experience of care provided. Similar problems were presented by all respondents. Both groups appeared equally familiar with other practice online services; e-consulters were somewhat more likely to have used them.From semistructured staff interviews, it appeared that, while largely acceptable within practice, introducing e-consults had potential for adverse interactions with pre-existing practice systems. There is potential to assess the impact of new systems on consultation patterns by extracting routine data from practice databases. Staff and patients noticed subtle changes to responsibilities associated with

78 FR 100 - Guidance for Industry and Food and Drug Administration Staff; Refuse To Accept Policy for 510(k)s...

Science.gov (United States)

2013-01-02

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-D-0523] Guidance for Industry and Food and Drug Administration Staff; Refuse To Accept Policy for 510(k)s; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug...

RECRUITMENT PRACTICES AND CRITERIA OF THE SUPPLIERS OF THE AUTOMOTIVE INDUSTRY

Directory of Open Access Journals (Sweden)

Daniela MIHAI

2012-12-01

Full Text Available The paper has as a purpose the analysis of the recruitment activity, from a theoretical and a practical point of view, at the level of a multinational company that carries on its activity in the automotive industry. In order to reach this purpose, we have studied the Romanian and foreign literature of the field and we have taken an in-depth interview to the human resources manager. The recruitment activity is extremely important for the automotive industry suppliers, especially at the level of the county of Argeş, because here we can find the greatest concentration of such companies. Because of the problematic economic and financial situation, at the level of the county of Argeş it is difficult to recruit in this industry. In order to be able to do it, the multinational companies have to manage their activity correctly and to design successful practices!

Heart and lung organ offer acceptance practices of transplant programs are associated with waitlist mortality and organ yield.

Science.gov (United States)

Wey, Andrew; Valapour, Maryam; Skeans, Melissa A; Salkowski, Nicholas; Colvin, Monica; Kasiske, Bertram L; Israni, Ajay K; Snyder, Jon J

2018-04-19

Variation in heart and lung offer acceptance practices may affect numbers of transplanted organs and create variability in waitlist mortality. To investigate these issues, offer acceptance ratios, or adjusted odds ratios, for heart and lung transplant programs individually and for all programs within donation service areas (DSAs) were estimated using offers from donors recovered July 1, 2016-June 30, 2017. Logistic regressions estimated the association of DSA-level offer acceptance ratios with donor yield and local placement of organs recovered in the DSA. Competing risk methodology estimated the association of program-level offer acceptance ratios with incidence and rate of waitlist removals due to death or becoming too sick to undergo transplant. Higher DSA-level offer acceptance was associated with higher yield (odds ratios [ORs]: lung, 1.04 1.11 1.19 ; heart, 1.09 1.21 1.35 ) and more local placement of transplanted organs (ORs: lung, 1.01 1.12 1.24 ; heart, 1.47 1.69 1.93 ). Higher program-level offer acceptance was associated with lower incidence of waitlist removal due to death or becoming too sick to undergo transplant (hazard ratios [HRs]: heart, 0.80 0.86 0.93 ; lung, 0.67 0.75 0.83 ), but not with rate of waitlist removal (HRs: heart, 0.91 0.98 1.06 ; lung, 0.89 0.99 1.10 ). Heart and lung offer acceptance practices affected numbers of transplanted organs and contributed to program-level variability in the probability of waitlist mortality. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Framework for managing mycotoxin risks in the food industry.

Science.gov (United States)

Baker, Robert C; Ford, Randall M; Helander, Mary E; Marecki, Janusz; Natarajan, Ramesh; Ray, Bonnie

2014-12-01

We propose a methodological framework for managing mycotoxin risks in the food processing industry. Mycotoxin contamination is a well-known threat to public health that has economic significance for the food processing industry; it is imperative to address mycotoxin risks holistically, at all points in the procurement, processing, and distribution pipeline, by tracking the relevant data, adopting best practices, and providing suitable adaptive controls. The proposed framework includes (i) an information and data repository, (ii) a collaborative infrastructure with analysis and simulation tools, (iii) standardized testing and acceptance sampling procedures, and (iv) processes that link the risk assessments and testing results to the sourcing, production, and product release steps. The implementation of suitable acceptance sampling protocols for mycotoxin testing is considered in some detail.

Initiatives in training program evaluation outside the nuclear utility industry

International Nuclear Information System (INIS)

Allen, C.J.

1987-01-01

Training literature is reviewed, and program evaluative practices outside the nuclear utility industry are reported. The findings indicate some innovations in philosophy and practice and program evaluation, although not necessarily in the context of evaluation as a route to assessing the impact of training. Program evaluation is described in the context of the impact of training, suggesting continued efforts to accept a multivariate concept of individual and organizational performance

Survey of past base isolation applications in nuclear power plants and challenges to industry/regulatory acceptance

International Nuclear Information System (INIS)

Malushte, S.R.; Whittaker, A.S.

2005-01-01

Seismic base isolation provides many benefits that can facilitate the standardization of future nuclear power plant structures and equipment while reducing the initial/life-cycle cost and construction schedule. This paper presents a survey of past seismic base isolation applications and studies related to nuclear applications and provides a discussion of the challenges that need to be overcome to gain industry and regulatory acceptance for deployment in future US nuclear power plants. Issues related to design, codes/standards/regulations, procurement, and construction, have been identified. (authors)

Formulation and practice of standards for radiation protection of γ-ray industrial computed tomography

International Nuclear Information System (INIS)

Zhou Rifeng; Wang Jue; Chen Weimin; Li Ping

2009-01-01

There are many differences between industrial CT and industrial radiography, such as imaging principle, inspection time, radiation dose and the requirements for operators etc. The national standards for radiation protection of industrial detection are not applicable to the requirements of protection and safety for γ-ray industrial CT to some extent now. In order to standardize the production and use for γ-ray industrial CT, protect the safety of operators and the public, and to promote the popularization and application of γ-ray industrial CT, it is significant to establish the national standards for radiation protection of γ-ray industrial CT as soon as possible. The purpose of this paper is to introduce the contents of this standard, and specify some important terms. Then there is a brief discussion on the existing problems during establishing such standards. At last, the paper summarize the practice of the standards passed over the past one year, which provides practicable experience for the further implementation. (authors)

Continuity and change in interorganizational project practices : The Dutch shipbuilding industry, 1950-2010

NARCIS (Netherlands)

Levering, R.C.; Ligthart, R.; Noorderhaven, N.G.; Oerlemans, L.A.G.

2013-01-01

The Dutch shipbuilding industry has a longstanding tradition in project-based production. Recently, industry actors have acknowledged a serious misfit between interorganizational project practices, defined as behaviors related to collaboration, and interorganizational project demands, defined as

Sustainability needs and practices assessment in the building industry of China

International Nuclear Information System (INIS)

Yang, Pingjian; He, Gang; Mao, Guozhu; Liu, Yong; Xu, Mingzhu; Guo, Huaicheng; Liu, Xi

2013-01-01

The building industry in China has huge potential capacity for energy/resources conservation and pollutants reduction to achieve sustainable development. However, stakeholders are hardly able to reach a consensus on preferential needs and effective solutions, which was a difficulty faced by policy makers. To better identify the common interests on sustainable development in this field, the Sustainability Solutions Navigator (SSN) was adopted in China for the first time to assess the sustainability needs and practices. Based on the participation of stakeholders from the government, businesses, academia, and non-government organizations, prioritized needs and practices were identified using SSN, and gap analyses were conducted for comparison to global benchmarks. According to the results, the top needs were mainly focused on improving government efficiency and implementation, maintaining healthy indoor environments and obtaining adequate funds; priority practices were mainly focused on governmental action, renewable energy development and pollutant source reduction. The gap analysis indicated that the government efficiency and performance had the largest gap to the benchmark. By using a simple interactive tool to bring different stakeholders into policy making process, this study produces all-around information for decision makers. The results imply that the sustainability of the building industry in China has a much better expectation than governmental performance. - Highlights: ► SSN was first used for sustainability assessment in China's building industry. ► Prioritized needs and practices of multiple stakeholders were identified. ► High expectation of improved governmental efforts from the study

CAPITAL INDUSTRY PRACTICE AND AGGRESSIVE CONSERVATIVE WORKING CAPITAL POLICIES IN NIGERIA

OpenAIRE

Rafiu Oyesola Salawu

2007-01-01

This study investigates fifteen diverse industrial groups over an extended period to establish the relationship between aggressive and conservative working capital practices. Data were sourced from the annual reports of the companies and the publications of Nigerian Stock Exchange. Descriptive statistics were used for analyzing the data collected. Results strongly show that firms in differing industries have significantly different current asset management policies. Additionally, the relative...

General Considerations on Leadership in the Hospitality Industry. Conceptual Analysis and Practical Studies

OpenAIRE

Andreia ISPAS

2010-01-01

Leadership in the hospitality industry is still an open research field especially in describing the effects of leadership style on hotel employees. The purpose of the paper is to present and analyze the following concepts: leadership and leadership style, hospitality industry; the practical aspects of leadership in the hospitality industry and to identify relevant studies regarding the importance of leadership styles applied in this industry. The research methodology consists of analyzing the...

Industrial paramedics, out on site but not out of mind.

Science.gov (United States)

Acker, Joseph J; Johnston, Tania M; Lazarsfeld-Jensen, Ann

2014-01-01

Australian natural resource exploration and production companies are employing paramedics to provide emergency medical response, primary health care, injury prevention, and health promotion services in remote locations nationally and internationally. Although Australian paramedic practice has steadily evolved to include increasingly complex medical interventions in the prehospital setting, paramedics are not yet registered health professionals, and in many states and territories their title is not protected. Similarly, tertiary-level education is becoming the entry to practice standard for traditional ambulance paramedics; however, certificate- and diploma-level paramedic courses remain an acceptable pathway to private and industrial paramedic jobs. To ensure acceptable patient safety standards are maintained and to protect all related stakeholders, the role, skills, training, and professional capacity of industrial paramedics must be defined. The study objective was to explore the published literature for a definition for the discipline of industrial paramedicine. A comprehensive systematic analysis was conducted using the EBSCOhost (health), MEDLINE, SCOPUS, and CINAHL electronic databases. The primary search terms "remote", "offshore", "mining", and "oil" were combined with the secondary search terms "paramedic" and "emergency medical services". An initial search using the combined two-term sets identified 870 citations. After application of the inclusion and exclusion criteria to a title and abstract review, 69 citations met the criteria including those discovered by searching the reference lists. Of these, nine citations were excluded because full-text papers could not be found and eight citations were excluded based on review of the full article. The result was 40 articles that discuss the role of paramedics in the remote or offshore environment (ROP) and 12 articles that discuss the provision of emergency medical services in the mining or oil and gas sectors

Industrial Photogrammetry - Accepted Metrology Tool or Exotic Niche

Science.gov (United States)

Bösemann, Werner

2016-06-01

New production technologies like 3D printing and other adaptive manufacturing technologies have changed the industrial manufacturing process, often referred to as next industrial revolution or short industry 4.0. Such Cyber Physical Production Systems combine virtual and real world through digitization, model building process simulation and optimization. It is commonly understood that measurement technologies are the key to combine the real and virtual worlds (eg. [Schmitt 2014]). This change from measurement as a quality control tool to a fully integrated step in the production process has also changed the requirements for 3D metrology solutions. Key words like MAA (Measurement Assisted Assembly) illustrate that new position of metrology in the industrial production process. At the same time it is obvious that these processes not only require more measurements but also systems to deliver the required information in high density in a short time. Here optical solutions including photogrammetry for 3D measurements have big advantages over traditional mechanical CMM's. The paper describes the relevance of different photogrammetric solutions including state of the art, industry requirements and application examples.

INDUSTRIAL PHOTOGRAMMETRY - ACCEPTED METROLOGY TOOL OR EXOTIC NICHE

Directory of Open Access Journals (Sweden)

W. Bösemann

2016-06-01

Full Text Available New production technologies like 3D printing and other adaptive manufacturing technologies have changed the industrial manufacturing process, often referred to as next industrial revolution or short industry 4.0. Such Cyber Physical Production Systems combine virtual and real world through digitization, model building process simulation and optimization. It is commonly understood that measurement technologies are the key to combine the real and virtual worlds (eg. [Schmitt 2014]. This change from measurement as a quality control tool to a fully integrated step in the production process has also changed the requirements for 3D metrology solutions. Key words like MAA (Measurement Assisted Assembly illustrate that new position of metrology in the industrial production process. At the same time it is obvious that these processes not only require more measurements but also systems to deliver the required information in high density in a short time. Here optical solutions including photogrammetry for 3D measurements have big advantages over traditional mechanical CMM’s. The paper describes the relevance of different photogrammetric solutions including state of the art, industry requirements and application examples.

Investigation of Food Acceptability and Feeding Practices for Lipid Nutrient Supplements and Blended Flours Used to Treat Moderate Malnutrition

Science.gov (United States)

Wang, Richard J.; Trehan, Indi; LaGrone, Lacey N.; Weisz, Ariana J.; Thakwalakwa, Chrissie M.; Maleta, Kenneth M.; Manary, Mark J.

2013-01-01

Objective: To examine acceptability and feeding practices associated with different supplementary food items and identify practices associated with weight gain. Methods: Caregivers (n = 409) whose children had been enrolled in a trial comparing a fortified corn-soy blended flour (CSB++), soy ready-to-use supplementary food (RUSF), and soy/whey…

A Descriptive Study towards Green Computing Practice Application for Data Centers in IT Based Industries

Directory of Open Access Journals (Sweden)

Anthony Jnr. Bokolo

2018-01-01

Full Text Available The progressive upsurge in demand for processing and computing power has led to a subsequent upsurge in data center carbon emissions, cost incurred, unethical waste management, depletion of natural resources and high energy utilization. This raises the issue of the sustainability attainment in data centers of Information Technology (IT based industries. Green computing practice can be applied to facilitate sustainability attainment as IT based industries utilizes data centers to provide services to staffs, practitioners and end users. But it is a known fact that enterprise servers utilize huge quantity of energy and incur other expenditures in cooling operations and it is difficult to address the needs of accuracy and efficiency in data centers while yet encouraging a greener application practice alongside cost reduction. Thus this research study focus on the practice application of Green computing in data centers which houses servers and as such presents the Green computing life cycle strategies and best practices to be practiced for better management in data centers in IT based industries. Data was collected through questionnaire from 133 respondents in industries that currently operate their in-house data centers. The analysed data was used to verify the Green computing life cycle strategies presented in this study. Findings from the data shows that each of the life cycles strategies is significant in assisting IT based industries apply Green computing practices in their data centers. This study would be of interest to knowledge and data management practitioners as well as environmental manager and academicians in deploying Green data centers in their organizations.

Sustainability and acceptance - new challenges for nuclear energy

International Nuclear Information System (INIS)

Lensa, W. von

2001-01-01

This paper discusses the concept of sustainability in relation to acceptance of nuclear energy. Acceptance is viewed in terms of public acceptance, industrial acceptance, and internal acceptance/consensus within the nuclear community. It addresses sustainability criteria, the need for innovation, and the different levels of acceptability. The mechanisms of risk perception are discussed along with the technological consequences from risk perception mechanisms leading to specific objections against nuclear energy. (author)

Need of risk management practice amongst bumiputera contractors in Malaysia construction industries

Science.gov (United States)

Syuhada Fadzil, Nur; Noor, Nurazuwa Md; Rahman, Ismail Abdul

2017-11-01

Malaysia construction industry has been growing continuously with double-digit growth for the past two decades. There are many issues surrounded the industry such as delay in delivery, cost overrun, quality and safety. In bumiputera contractor’s context, the literature review found that 32 issues were encountered in the construction project. These issues can be handled properly with the application of risk management. According to previous researchers, application of risk management in Malaysia construction industry is at the low level where it is implemented in traditional ways that are brainstorming and checklist. These were due to lack of knowledge, the high cost of hiring experts and avoiding extra cost. Besides that, this study also intentions to analyse the risk categories in the construction industry as well as identify risk management process to resolve the construction issues. Hence, this paper presents issues engulfed by Bumiputera contractors which can partly be resolved by applying risk management practice in carrying out the construction activity. This may inspire the contractors to apply the risk management practice in ensuring the success of their construction project.

Tolley's industrial and commercial gas installation practice

CERN Document Server

Hazlehurst, John

2010-01-01

This is the third of three essential reference volumes for those concerned with the installation and servicing of domestic and industrial gas equipment. This volume explains the basic principles underlying the practical and theoretical aspects of installing and servicing gas appliances and associated equipment, from the basics of combustion, to burners, pressure and flow, transfer of heat, controls, as well as materials and processes, electrical aspects, and metering and measuring devices. Covering both Natural Gas and Liquefied Petroleum Gas, the many illustrations and worked examples include

Beyond the Certification Badge—How Infrastructure Sustainability Rating Tools Impact on Individual, Organizational, and Industry Practice

Directory of Open Access Journals (Sweden)

Kerry Griffiths

2018-03-01

Full Text Available Sustainability consideration in designing, constructing, and operating civil infrastructure requires substantive action and yet progress is slow. This research examines the impact third-party infrastructure sustainability rating tools—specifically CEEQUAL, Envision, Greenroads, and Infrastructure Sustainability—have beyond individual project certification and considers their role in driving wider industry change. In this empirical study, engineering and sustainability professionals (n = 63 assess and describe their experience in using rating tools outside of formal certification and also the impact of tool use on their own practice and the practices of their home organizations. The study found that 77% of experienced users and 59% of infrastructure owners used the tools for purposes other than formal project certification. The research attests that rating tool use and indeed their very existence has a strong influence on sustainability awareness and practice within the infrastructure industry, providing interpretation of sustainability matters in ways that resonate with industry norms. The rating tools impact on individuals and their professional and personal practice, on the policies and practices of infrastructure-related organizations, and more widely on other industry stakeholders. The findings can be used to increase the value gained from sustainability rating tool use and to better understand the role such tools play in creating cultural change within the industry.

The Development of a Green Practice Index for the Malaysian Hotel Industry

Directory of Open Access Journals (Sweden)

A. K. Siti–Nabiha

2014-03-01

Malaysian hotels. Doing so, however, resulted in a search for green index development methods. This lead to the discovery that existing tools such as the Delphi method were not appropriate tools that could be used to develop a Malaysian green index. To address the above, the authors propose a green index development method that can be used for a  Malaysian and developing country context. Hence, in this paper, the method of developing a green practice index for the Malaysian hospitality industry, the differences and advantages of this method compared to the commonly used Delphi method and finally the Malaysian Green Practice Index for the hotel industry are presented.

A Comparison of Competing Models for Understanding Industrial Organization’s Acceptance of Cloud Services

Directory of Open Access Journals (Sweden)

Shui-Lien Chen

2018-03-01

Full Text Available Cloud computing is the next generation in computing, and the next natural step in the evolution of on-demand information technology services and products. However, only a few studies have addressed the adoption of cloud computing from an organizational perspective, which have not proven whether the research model is the best-fitting model. The purpose of this paper is to construct research competing models (RCMs and determine the best-fitting model for understanding industrial organization’s acceptance of cloud services. This research integrated the technology acceptance model and the principle of model parsimony to develop four cloud service adoption RCMs with enterprise usage intention being used as a proxy for actual behavior, and then compared the RCMs using structural equation modeling (SEM. Data derived from a questionnaire-based survey of 227 firms in Taiwan were tested against the relationships through SEM. Based on the empirical study, the results indicated that, although all four RCMs had a high goodness of fit, in both nested and non-nested structure comparisons, research competing model A (Model A demonstrated superior performance and was the best-fitting model. This study introduced a model development strategy that can most accurately explain and predict the behavioral intention of organizations to adopt cloud services.

The potential and acceptance of exoskeletons in industry

NARCIS (Netherlands)

de Looze, Michiel P.; Krause, Frank; O’Sullivan, Leonard W.

2017-01-01

Worldwide, a significant interest in wearable robots or exoskeletons does exist, also from an industrial background. This paper provides an overview of assistive exoskeletons that have specifically been developed for industrial purposes. It discusses their potential in increasing performance and

Development of a Survey to Assess the Acceptability of an Innovative Contraception Practice among Rural Pharmacists

Directory of Open Access Journals (Sweden)

Michael Wong

2014-03-01

Full Text Available Improved access to effective contraceptive methods is needed in Canada, particularly in rural areas, where unintended pregnancy rates are high and specific sexual health services may be further away. A rural pharmacist may be the most accessible health care professional. Pharmacy practice increasingly incorporates cognitive services. In Canada many provinces allow pharmacists to independently prescribe for some indications, but not for hormonal contraception. To assess the acceptability for the implementation of this innovative practice in Canada, we developed and piloted a survey instrument. We chose questions to address the components for adoption and change described in Rogers’ “diffusion of innovations” theory. The proposed instrument was iteratively reviewed by 12 experts, then focus group tested among eight pharmacists or students to improve the instrument for face validity, readability, consistency and relevancy to community pharmacists in the Canadian context. We then pilot tested the survey among urban and rural pharmacies. 4% of urban and 35% of rural pharmacies returned pilot surveys. Internal consistency on repeated re-phrased questions was high (Cronbach’s Alpha = 0.901. We present our process for the development of a survey instrument to assess the acceptability and feasibility among Canadian community pharmacists for the innovative practice of the independent prescribing of hormonal contraception.

Evaluation of corporate energy management practices of energy intensive industries in Turkey

International Nuclear Information System (INIS)

Ates, Seyithan Ahmet; Durakbasa, Numan M.

2012-01-01

Turkey is one of a number of countries who still lack a national management standard for energy. Industrial energy consumption accounts for 42% of Turkey's total energy consumption. With the help of a questionnaire and analytical framework, this paper investigates Industrial Energy Management Practice in Turkey and highlights significant bottlenecks and shortcomings of energy intensive industries in terms of energy management application. The survey was carried out as a multiple case study of the Turkish iron, steel, cement, paper, ceramics and textile industries. Outcomes of the questionnaire are evaluated according to the analytical framework which covers company characteristics, regulations, external relations of the companies and internal organizational conditions. After analyzing these elements on the basis of a minimum requirement list, it was found that only 22% of the surveyed companies actually practice corporate energy management in Turkey. The main barriers to proper energy management implementation were identified as lack of synergy between the stakeholders, the extent and scope of energy manager courses, and inadequate awareness of and lack of financial support for energy management activities. As a guideline to overcome present obstacles, a set of policy options are offered: strengthening and restructuring of legal and institutional frameworks, promotion of energy efficiency, education, training and capacity building and facilitating implementation of the international energy management standard ISO 50001. -- Highlights: ► Developing an analytical scheme to assess degree of Energy Management Application. ► Investigation of Energy Management Practices in Turkish Energy Intensive Industries. ► Analysis of challenges which hinder full implementation of energy management in Turkey. ► Presenting a set of essential policy options thought for all stakeholders.

Probabilistic Requirements (Partial) Verification Methods Best Practices Improvement. Variables Acceptance Sampling Calculators: Derivations and Verification of Plans. Volume 1

Science.gov (United States)

Johnson, Kenneth L.; White, K, Preston, Jr.

2012-01-01

The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques. This recommended procedure would be used as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. This document contains the outcome of the assessment.

The emerging role of large eddy simulation in industrial practice: challenges and opportunities.

Science.gov (United States)

Hutton, A G

2009-07-28

That class of methods for treating turbulence gathered under the banner of large eddy simulation is poised to enter mainstream engineering practice. There is a growing body of evidence that such methods offer a significant stretch in industrial capability over solely Reynolds-averaged Navier-Stokes (RANS)-based modelling. A key enabling development will be the adaptation of innovative processor architectures, resulting from the huge investment in the gaming industry, to engineering analysis. This promises to reduce the computational burden to practicable levels. However, there are many lessons to be learned from the history of the past three decades. These lessons should be analysed in order to inform, if not modulate, the unfolding of this next cycle in the development of industrial modelling capability. This provides the theme for this paper, which is written very much from the standpoint of the informed practitioner rather than the innovator; someone with a strong motivation to improve significantly the competence with which industrial turbulent flows are treated. It is asserted that the reliable deployment of the methodology in the industrial context will prove to be a knowledge-based discipline, as was the case with RANS-based modelling, if not more so. The community at large should collectively make great efforts to put in place that knowledge base from which best practice advice can be derived at the very start of this cycle of advancement and continue to enrich it as the cycle progresses.

Understanding transferable supply chain lessons and practices to a "high-tech" industry using guidelines from a primary sector industry: a case study in the food industry supply chain.

Science.gov (United States)

Coronado Mondragon, Adrian E; Coronado Mondragon, Christian E; Coronado, Etienne S

2015-01-01

Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a "high-tech" industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a "high-tech" industry such as composite materials would be to review supply chain lessons and practices in "low-tech" industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived "low-tech" industry that can be used to provide guidelines in the design of the supply chain of a "high-tech" industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a "low-tech" industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry.

Canadian East Coast offshore petroleum industry safe lifting practices respecting offshore pedestal cranes, offshore containers, loose gear, other lifting devices, and operational best practices : standard practices

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-11-15

This document was developed by a working group with representatives from the petroleum industry, the Offshore Petroleum Boards and Certifying Authorities. It outlines industry best practices for operators responsible for the management, planning and execution of offshore lifting operations. Its purpose is to assist in the interpretation of applicable legislation and standards. Considered within the practice are safe design requirements, manufacture, certification, testing, maintenance and inspection requirements for pedestal cranes, offshore containers, loose gear and lifting devices. Operational best practices for lifting operations are also included along with a section that identifies additional requirements for personnel lifting operations, including personnel transfers by crane and man-riding operations. 82 refs., 2 tabs., 4 figs., 3 appendices.

A Causal Relationship between Quality Management Practices, Supply-Chain Practices, Demand-Chain Practices, and Company Performance: Evidence from the Indonesia’s Oil and Gas Industry

OpenAIRE

Ciptono, Wakhid Slamet

2015-01-01

Studi ini mengembangkan suatu hubungan kausal antara lima konstruk penelitian QualityManagement Practices (QMP), Supply-Chain Practices (SCP), Demand-Chain Practices (DCP), CompanyPerformance (Value-Gain Performance atau VGP dan Monetary-Gain Performance atau MGP) denganmenggunakan Structural Equation Modeling (SEM)—studi kasus pada industri migas di Indonesia. Modelkonseptual penelitian ini merupakan kolaborasi dari berbagai penelitian sebelumnya yang terkait denganenam dimensi praktik manaj...

Operation of industrial electrical substations. Part II: practical applications

Energy Technology Data Exchange (ETDEWEB)

Sanchez Jimenez, Juan J; Zerquera Izquierdo, Mariano D; Beltran Leon, Jose S; Garcia Martinez, Juan M; Alvarez Urena, Maria V; Meza Diaz, Guillermo [Universidad de Guadalajara (Mexico)]. E-mails: cheosj@yahoo.com; mdzi@hotmail.com; beltran5601@yahoo.com.mx; jmargarmtz@yahoo.com; victory_alvarez@telmexmail.com; depmec@cucei.udg.mx

2013-03-15

The practical application of the methodology explained in Part 1 in a Cuban industry is the principal objective of this paper. The calculus of the economical operation of the principal transformers of the industrial plant is shown of the one very easy form, as well as the determination of the equations of the losses when the transformers operate under a given load diagram. It is calculated the state load which will be passed to the operation in parallel. [Spanish] El objetivo principal de este trabajo es la aplicacion practica de la metodologia, en una industria cubana, que se explico en la Parte 1. El calculo de la operacion economica de los principales transformadores de la planta industrial se muestra de una forma muy facil, asi como la determinacion de las ecuaciones de las perdidas cuando los transformadores operan bajo un diagrama de carga dado. Se calcula la carga de estado que se pasa a la operacion en paralelo.

Industry challenge to best practice risk communication.

Science.gov (United States)

McEntire, J; Boateng, A

2012-04-01

Effective food safety and food defense risk communication helps to inform consumers without causing panic and alarm. The Risk Communication Team of the Natl. Center for Food Protection and Defense has developed a list of 11 best practices recommended for effective risk communication. These practices, designed for a food defense crisis, are currently applied to food safety issues, since fortunately a food defense crisis has yet to occur. IFT examined the utility of these best practices and the limitations on their use during food safety and food defense crises by academics, trade associations, and the government. It was hypothesized that legal and business considerations as well as the nature of the event would determine the implementation of the best practices. Through the use of focus group meetings, it was discovered that there was a low level of awareness of the best practices. However, stakeholders practiced some aspects of the recommended practices. Participants felt some of the practices were related and could be consolidated. They also agreed that a food defense event will increase the urgency of the communication and include players not typically involved in food safety issues. The challenges reported by the stakeholders varied, but legal liability, as well as the impact their communications could have on an industry, were often cited. From the government perspective, their need to act within their authorities drove some of their actions with respect to communication. Determining the differences in communication limitations during food safety against food defense events can provide key information to further developing and refining risk communications and specific messages targeted for a food defense incident. Effective food safety and food defense risk communication helps to inform consumers without causing panic and alarm. Determining the differences in communication limitations during food safety against food defense events can provide key information to

Study of waste acceptance criteria for low-level radioactive waste from medical, industrial, and research facilities (Contract research)

International Nuclear Information System (INIS)

Koibuchi, Hiroto; Dohi, Terumi; Ishiguro, Hideharu; Hayashi, Masaru; Senda, Masaki

2008-12-01

Japan Atomic Energy Agency (JAEA) is supposed to draw up the plan for the disposal program of the very low-level radioactive waste and low-level radioactive waste generated from medical, industrial and research facilities. For instance, there are these facilities in JAEA, universities, private companies, and so on. JAEA has to get to know about the waste and its acceptance of other institutions described above because it is important for us to hold the licenses for the disposal program regarding safety assessment. This report presents the basic data concerning radioactive waste of research institutes etc. except RI waste, domestic and foreign information related to acceptance criteria for disposal of the low-level radioactive waste, the current status of foreign medical waste management, waste acceptance, and such. In this report, Japan's acceptance criteria were summarized on the basis of present regulation. And, the criteria of foreign countries, United States, France, United Kingdom and Spain, were investigated by survey of each reference. In addition, it was reported that the amount of waste from laboratories etc. for near-surface disposal and their characterization in our country. The Subjects of future work: the treatment of hazardous waste, the problem of the double-regulation (the Nuclear Reactor Regulation Law and the Law Concerning Prevention from Radiation Hazards due to Radioisotopes and Others) and the possession of waste were discussed here. (author)

INFUSING INDUSTRY PRACTICES INTO AN ENGINEERING CAPTSONE PROJECT: A LEARNING OUTCOME ATTAINMENT CASE STUDY

Directory of Open Access Journals (Sweden)

SATESH NAMASIVAYAM

2016-04-01

Full Text Available A capstone project in current engineering education is often introduced to enable the holistic attainment of engineering knowledge by an engineering undergraduate. Essentially project-based in nature, there exists a need to ensure that part of the attainment process involves key industry practices – such practices being necessary in attaining the status of a professional engineer. Herein lies the synergy that can be made use of between industry and academia. By exposing engineering undergraduates to a project which addresses an engineering challenge and providing them with the opportunity to learn from professional engineers who are experts in the fields of safety, sustainability, quality management, ethics and project management, this culminates in the implementation of a prototype design which incorporates the amalgamation of knowledge from industry and academia. This paper presents the unique curriculum developed in a capstone project module, incorporating learning sessions from professional engineers in the five (5 key areas of industry practice highlighted above and how these have contributed to significantly enhancing the learning outcome and hence programme outcome attainment of the engineering undergraduates who have experienced the module.

Evaluation of safety practices and performance in a brewery industry ...

African Journals Online (AJOL)

Evaluation of safety practices and performance in a brewery industry in Nigeria between 2000 – 2007. ... Journal of Applied Sciences and Environmental Management ... The study revealed that a total of 156 accidents were prevented in the period of the safety programme which translates to an average of 19.45 per year.

Developing a CANDU industry maintenance guide. A 'community of practice' compendium

International Nuclear Information System (INIS)

Von Hatten, P.; Hoye, D.S.

2011-01-01

The CANDU Owners Group (COG) has initiated a joint utility project to create an Industry Maintenance Guide. The primary goal of the guide is to provide a structured template of activities to implement the maintenance program, based on industry best practices, and with consideration for new regulatory requirements identified in the Canadian Nuclear Safety Commission document S210. The guide will be prepared with a macro view of the maintenance program, which includes core maintenance activities as well as supporting activities and programs in Engineering, Supply Chain and Work Management. Currently there is no such document that solidly links all the requirements to develop, support and execute a maintenance program. Some elements are captured in various industry documents such as INPO documents AP928, Work Management, AP913, Equipment Reliability and AP908, Materials and Services. The guide will not replicate these good practices, but will focus on how they are linked and interrelate to create an optimum program. It is expected that utilities will be able to utilize the guide to take the next incremental step in performance based on cross functional alignment and efficiency.

Understanding Transferable Supply Chain Lessons and Practices to a “High-Tech” Industry Using Guidelines from a Primary Sector Industry: A Case Study in the Food Industry Supply Chain

Science.gov (United States)

Coronado Mondragon, Adrian E.; Coronado, Etienne S.

2015-01-01

Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a “high-tech” industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a “high-tech” industry such as composite materials would be to review supply chain lessons and practices in “low-tech” industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived “low-tech” industry that can be used to provide guidelines in the design of the supply chain of a “high-tech” industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a “low-tech” industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry. PMID:25821848

Feasibility and acceptance of electronic quality of life assessment in general practice: an implementation study

Directory of Open Access Journals (Sweden)

Kochen Michael M

2009-06-01

Full Text Available Abstract Background Patients' health related quality of life (HRQoL has rarely been systematically monitored in general practice. Electronic tools and practice training might facilitate the routine application of HRQoL questionnaires. Thorough piloting of innovative procedures is strongly recommended before the conduction of large-scale studies. Therefore, we aimed to assess i the feasibility and acceptance of HRQoL assessment using tablet computers in general practice, ii the perceived practical utility of HRQoL results and iii to identify possible barriers hindering wider application of this approach. Methods Two HRQoL questionnaires (St. George's Respiratory Questionnaire SGRQ and EORTC QLQ-C30 were electronically presented on portable tablet computers. Wireless network (WLAN integration into practice computer systems of 14 German general practices with varying infrastructure allowed automatic data exchange and the generation of a printout or a PDF file. General practitioners (GPs and practice assistants were trained in a 1-hour course, after which they could invite patients with chronic diseases to fill in the electronic questionnaire during their waiting time. We surveyed patients, practice assistants and GPs regarding their acceptance of this tool in semi-structured telephone interviews. The number of assessments, HRQoL results and interview responses were analysed using quantitative and qualitative methods. Results Over the course of 1 year, 523 patients filled in the electronic questionnaires (1–5 times; 664 total assessments. On average, results showed specific HRQoL impairments, e.g. with respect to fatigue, pain and sleep disturbances. The number of electronic assessments varied substantially between practices. A total of 280 patients, 27 practice assistants and 17 GPs participated in the telephone interviews. Almost all GPs (16/17 = 94%; 95% CI = 73–99%, most practice assistants (19/27 = 70%; 95% CI = 50–86% and the majority of

Code of practice for the safe use of industrial radiography equipment (1989)

International Nuclear Information System (INIS)

1989-12-01

This code supersedes the Code of practice for the control and safe handling of sealed radioactive sources used in industrial radiography, published by the National Health and Medical Research Council (NHMRC) in 1968. It differs significantly from the former code because radiation protection practice and recommended standards have changed. The code covers the design, construction and requirements for the safe use of X-radiography equipment and gamma-radiography equipment. It provides illustrative working rules, detailed emergency procedures and comprehensive responsibilities and duties for all personnel involved in supplying and using industrial radiography equipment. The code details those equipment requirements, personnel requirements and work practices that the NHMRC considers necessary to keep exposures to ionizing radiation as low as reasonably achievable. Some equipment and facilities currently in use may not meet all of the mandatory requirements of this code. These requirements have been included in the code to encourage progress towards future compliance in the expectation that, in the interim, statutory authorities will apply them with discretion

Perceptions of industrial and nuclear risks. Stakes, negotiations and social development of levels of risk acceptance

International Nuclear Information System (INIS)

Bernier, S.Ch.

2007-11-01

In this thesis we will question the perceptions of industrial risks in the occidental world at the beginning of the 21. century. For this purpose we will try to understand how concepts such as sustainable development, precautionary principle, liability, or even zero-risk bias have progressively developed around a thought model based on the scientific rationality. This model is now undermined by its incapacity to fully address the issues it raises and completely avoid the potential risks. However, despite consistent weaknesses, it remains a reference value moulded by past accidents which have led to the making of laws aiming mainly at defining liability and protecting those who are held liable. Thus, public information becomes a requirement for democracy and the protection of this thought model. In this context, the protagonists at stake are security-conscious, economical and political lobbies that constantly redefine the limits of risk acceptance. We come to the realization that our lifestyle and value system remain unchallenged even though undergoing a crisis. The specificity of this research lies into the importance we give to the local approach, dealing with registered Seveso sites and nuclear plants located in Indre et Loire. We have polled five categories of respondents through interviews or questionnaires in order to understand their opinion regarding situations involving technological risks. The result of this survey helps us understand and set the levels of risk acceptance that they define with regard to the industrial risks and show the complexity of a situation involving political stakes, environmental pressures, a profit-driven economy and security constraints, in a vague and complex context. This work gives us a contrasted picture of today's perceptions of risks. (author)

Technology transfer for industrial production of superconducting magnets for the RHIC project at BNL

International Nuclear Information System (INIS)

Wanderer, P.; Anerella, M.D.; Greene, A.F.; Kelly, E.; Willen, E.

1994-01-01

Industrial production of superconducting magnets for the Relativistic Heavy Ion Collider (RHIC) has begun. The R ampersand D for the magnets was carried out at BNL. Following the award of built-to-print contracts, staff from the laboratory and the vendors worked toward transferring both design principles and practical details to an industrial framework for cost effective production. All magnets made thus far have been acceptable for use in RHIC

Environmental risk communication in the petroleum industry

International Nuclear Information System (INIS)

Mulligan, J.

1997-01-01

The principles and practices of risk communication in the petroleum industry in Alberta were presented. In order to effectively communicate about risk, three challenges must be met: (1) the representatives of the oil company must accept the legitimacy of the public's assessment of risk, (2) the communication needs to be two-way, and (3) the risk-related issues in the community must be addressed through a process of participatory decision-making where the public is accepted as a legitimate partner. For the oil and gas companies, failing to undertake effective risk communication can lead to many problems, such as difficulties in obtaining regulatory approvals, production delays, high legal fees, and loss of public trust

Realizing energy infrastructure projects – A qualitative empirical analysis of local practices to address social acceptance

International Nuclear Information System (INIS)

Friedl, Christina; Reichl, Johannes

2016-01-01

The federal state of Upper Austria, at a crossing point for European energy grids, provides large-scale resources for storage of natural gas and is among the top infrastructures in this regard in Europe. Considering the ambitious plans for enhancements of energy infrastructures in this region, the issue of social acceptance of energy infrastructure is crucial. To foster an understanding of the challenges inherent in this issue we present an analysis concentrating on the social acceptance of energy infrastructure projects in Upper Austria. This paper addresses the issues with realizing energy infrastructure projects and analyzes the problems and benefits based on an empirical–qualitative study comprising expert interviews, discussions with stakeholders, and a round table workshop integrating the disparate viewpoints. The aim of the process was to integrate different attitudes, perspectives and positions of relevant stakeholders, members of citizens’ initiatives, environmental organizations and of the national government and local authorities. The results presented are based on both the analysis of the empirical–qualitative data and the existing studies and literature on social acceptance. The qualitative research compares experiences and current practices with social acceptance issues (like frameworks, participation, communication strategies) in a set of considered energy infrastructure projects. - Highlights: • Relates evidence of the effects of local resistance to Upper Austrian infrastructure projects. • We use a qualitative analysis to gain a holistic understanding of the social acceptance issue. • Acceptance is hampered by political, legal, institutional and procedural frameworks. • The issues of participation and communication play a key role.

Landfill gas operation and maintenance manual of practice

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This manual has the following objectives: (1) compile and present key portions of the general body of knowledge about operating and maintaining LFG control systems; (2) present information in an easy to understand format useful for hands-on practical use in the field; (3) present accepted practices and procedures for LFG control practices; (4) highlight key points, common mistakes and lessons learned from more than 20 years of industry experience, point out areas of controversy and indicate alternative practices where applicable; (5) compile key reference information; and (6) provide theory and discussion needed to develop a deeper understanding of LFG control and recovery.

The joint industry development of a recommended practice for the site specific assessment of mobile jackup units

International Nuclear Information System (INIS)

Jones, D.E.; Bennett, W.T.; Hoyle, M.J.R.

1993-01-01

The mobile self-elevating (drilling) unit, or jack-up, has been central to the exploration and development of offshore oil and gas reserves. In recent years there has been an increased desire to benefit from the potential economics of using these units in longer term production roles either in association with a fixed platform or as a stand-alone facility. However, until recently there had been no concerted effort to develop a consistent and commonly accepted standard for general industry use in site specific assessment of jack-ups. This paper describes the background and work carried out to develop such a standard. The project is nearing completion and has resulted in the publication of a Guideline document. A Recommended Practice and associated Commentary are (at the time of writing) in the final stage of drafting for release to the project sponsors for trial and comment prior to issuing the first Edition early in 1994

Gasoline risk management: a compendium of regulations, standards, and industry practices.

Science.gov (United States)

Swick, Derek; Jaques, Andrew; Walker, J C; Estreicher, Herb

2014-11-01

This paper is part of a special series of publications regarding gasoline toxicology testing and gasoline risk management; this article covers regulations, standards, and industry practices concerning gasoline risk management. Gasoline is one of the highest volume liquid fuel products produced globally. In the U.S., gasoline production in 2013 was the highest on record (API, 2013). Regulations such as those pursuant to the Clean Air Act (CAA) (Clean Air Act, 2012: § 7401, et seq.) and many others provide the U.S. federal government with extensive authority to regulate gasoline composition, manufacture, storage, transportation and distribution practices, worker and consumer exposure, product labeling, and emissions from engines and other sources designed to operate on this fuel. The entire gasoline lifecycle-from manufacture, through distribution, to end-use-is subject to detailed, complex, and overlapping regulatory schemes intended to protect human health, welfare, and the environment. In addition to these legal requirements, industry has implemented a broad array of voluntary standards and best management practices to ensure that risks from gasoline manufacturing, distribution, and use are minimized. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Credit in Acceptance Sampling on Attributes

NARCIS (Netherlands)

Klaassen, Chris A.J.

2000-01-01

Credit is introduced in acceptance sampling on attributes and a Credit Based Acceptance sampling system is developed that is very easy to apply in practice.The credit of a producer is defined as the total number of items accepted since the last rejection.In our sampling system the sample size for a

Best practice asset management in the nuclear industry

International Nuclear Information System (INIS)

Maxey, Terry M.

2004-01-01

Pursuit of operational excellence is the goal of every nuclear plant operator. Implementation of Enterprise Asset Management(EAM) solutions in the nuclear industry has significantly contributed to record performance over the last decade in the areas of reliability and production, nuclear and personnel safety, and production cost. This presentation will outline the scope of best practice EAM implementation and highlight performance results achieved from EAM deployment. It will also explore areas of future opportunity in which EAM solutions will support an era of new nuclear plant construction in the United States

Operations Acceptance Management

OpenAIRE

Suchá, Ivana

2010-01-01

This paper examines the process of Operations Acceptance Management, whose main task is to control Operations Acceptance Tests (OAT). In the first part the author focuses on the theoretical ground for the problem in the context of ITSM best practices framework ITIL. Benefits, process pitfalls and possibilities for automation are discussed in this part. The second part contains a case study of DHL IT Services (Prague), where a solution optimizing the overall workflow was implemented using simp...

Environmental management in the Australian minerals and energy industries: principles and practices

Energy Technology Data Exchange (ETDEWEB)

Mulligan, D.R. [ed.] [University of Queensland, St. Lucia, Qld. (Australia). Centre for Mined Land Rehabilitation, Dept. of Agriculture

1996-12-31

This is a comprehensive reference text on the principles and practices of environmental management being developed and implemented in Australia`s mining and energy industries. It also present a set of case histories focused on individual minerals (coal, sand, aluminium, iron ore, base metals, uranium, mineral sands, construction materials and petroleum). The 5 of the 20 chapters of particular relevance to the coal industry have been abstracted separately for the IEA Coal Research CD-ROM. 800 refs.

Code of practice for the safe use of industrial radiography equipment (1989)

International Nuclear Information System (INIS)

1989-12-01

This code supersedes the Code of Practice for the control and safe handling of sealed radioactive sources use din industrial radiography, published by the National Health and Medical Research Council (NHMRC) in 1968. It differs significantly from the former code because radiation protection practice and recommended standards have changed. The code covers the design, construction and requirements for the safe use of X-radiography equipment and gamma-radiography equipment. It provides illustrative working rules, detailed emergency procedures and comprehensive responsibilities and duties for all personnel involved in supplying and using industrial radiography equipment. The code details those equipment requirements, personnel requirements and work practices that the NHMRC considers necessary to keep exposures to ionizing radiation as low as reasonably achievable. Some equipment and facilities currently in use may not meet all of the mandatory requirements of this code. These requirements have been included in the code to encourage progress towards future compliance in the expectation that, in the interim, statutory authorities will apply them with discretion. 9 refs., tabs., ills

Determining Service Life of Respirator Cartridges Using a Simple and Practical Method: Case Study in a Car Manufacturing Industry

Directory of Open Access Journals (Sweden)

A.M Rashidi

2012-01-01

Full Text Available Background and aims: For ensuring about proper performance of air-purifying respirators in providing protection against workplace contaminants, it is necessary to change the respirator cartridges before the end of their service life. The aim of this study was determination of service life of organic vapor cartridges using a simple and practical method in a spray painting booth of a car manufacturing industry.   Methods: NIOSH MultiVapor software was used for estimating service life of respirator cartridges based on workplace conditions and cartridge specifications. Efficiency of determined service life was investigated using an apparatus for field testing of cartridges in the workplace.   Results: The results showed that existing schedule for changing the respirator cartridges is not effective and no longer provide adequate protection for sprayers against organic contaminants while working in a painting booth. It is necessary to change the cartridges before their estimated service life (every 4 hours.   Conclusion: NIOSH MultiVapor has acceptable efficiency for determining respirator cartridges service life and could be used as a simple and practical method in the workplace. Moreover, Service life estimated by this software was confirmed by cartridge field test apparatus.

Attitude and practice of dental surgeons towards pharmaceutical companies' marketing gifts.

Science.gov (United States)

Tahir, Shaila; Rafique, Adeela; Ghafoor, Farkhanda; Saleem, Akif; Khan, Amanullah

2013-01-01

Interaction of pharmaceutical companies (PC) with healthcare services has been a reason for concern. In medicine, awareness of the ethical implications of these interactions have been emphasized upon, while this issue has not been highlighted in dentistry. This study undertook a cross-sectional rapid assessment procedure to gather views of dentists in various institutions towards unethical practices in health care and pharmaceutical industry. The purpose of this study was to assess the need for the formulation and implementation of guidelines for the interaction of dentists with the pharmaceutical and device industry in the best interest of patients. A group of 209 dentists of Lahore including faculty members, demonstrators, private practitioners and fresh graduates responded to a questionnaire to assess their attitudes and practices towards pharmaceutical companies' marketing gifts. The study was conducted during 2011 and provided interesting data that showed the pharmaceutical industry is approaching private practitioners more frequently than academicians and fresh graduates. Private practioners accepted the gifts but mostly recognized them as unethical (over 65%). Both groups considered sponsoring of on-campus lectures as acceptable (over 70%). Respondents are not fully aware of the ethical demands which are imperative for all health care industries, and there is a dire need of strict guidelines and code of ethics for the dentist's interaction with the pharmaceutical and device industry so that patient interest is protected.

Feasibility Study on the Development of Index that Shows Social and Cultural Acceptance of Nuclear Power

Energy Technology Data Exchange (ETDEWEB)

Cho, SeongKyung [Bangmok College of General Education at Myongji Univ., Yongin (Korea, Republic of); Choi, Seungho; Yoon, Hana; Song, Jiyeon [Domo Brodeur, Seoul (Korea, Republic of)

2015-05-15

In this context, it is necessary to manage and develop an index that can measure the level of public acceptance by establishing the terms of social/cultural public acceptance of nuclear power in a practical manner and by identifying influential factors of public acceptance. Developing an index itself is not intended to increase the public acceptance of nuclear power. This study intends to contribute to determining energy policy acceptable to the public by estimating the level of potential social conflicts related to nuclear power policies with eligible evaluation criteria on social/cultural acceptance and by reducing relevant social costs. Key conclusions and proposal of this research are as follows. First, the influential factors of acceptance are reliability of nuclear safety, risk perception of nuclear power and beneficial perception of nuclear power. Among them, reliability of nuclear safety appears to have the most influence. In addition, benefit perception of nuclear power at the social level is significantly higher than that at the individual level. However, in relation to risk perception, a gap between experts and the public is found as nuclear industry premises that accident does not occur while the public premises that accident may occur.

Feasibility Study on the Development of Index that Shows Social and Cultural Acceptance of Nuclear Power

International Nuclear Information System (INIS)

Cho, SeongKyung; Choi, Seungho; Yoon, Hana; Song, Jiyeon

2015-01-01

In this context, it is necessary to manage and develop an index that can measure the level of public acceptance by establishing the terms of social/cultural public acceptance of nuclear power in a practical manner and by identifying influential factors of public acceptance. Developing an index itself is not intended to increase the public acceptance of nuclear power. This study intends to contribute to determining energy policy acceptable to the public by estimating the level of potential social conflicts related to nuclear power policies with eligible evaluation criteria on social/cultural acceptance and by reducing relevant social costs. Key conclusions and proposal of this research are as follows. First, the influential factors of acceptance are reliability of nuclear safety, risk perception of nuclear power and beneficial perception of nuclear power. Among them, reliability of nuclear safety appears to have the most influence. In addition, benefit perception of nuclear power at the social level is significantly higher than that at the individual level. However, in relation to risk perception, a gap between experts and the public is found as nuclear industry premises that accident does not occur while the public premises that accident may occur

Environmental Reporting and Disclosure Practices - In Malaysian Property Industry

OpenAIRE

Natthondan, Shankari

2009-01-01

This research examined and analyzed the extent of environmental reporting and disclosure practices of the Kuala Lumpur Composite Index Companies (KLCI) as listed on the Bursa Malaysia on 21 January 2008. In particular the property industry companies were identified as a high profile sector as it is more sensitively exposed to environmental activities. The degree of reporting on environmental matters by this category of listed companies is indicative of the trend of the overall compliance and ...

Critical factors influencing physicians' intention to use computerized clinical practice guidelines: an integrative model of activity theory and the technology acceptance model.

Science.gov (United States)

Hsiao, Ju-Ling; Chen, Rai-Fu

2016-01-16

With the widespread use of information communication technologies, computerized clinical practice guidelines are developed and considered as effective decision supporting tools in assisting the processes of clinical activities. However, the development of computerized clinical practice guidelines in Taiwan is still at the early stage and acceptance level among major users (physicians) of computerized clinical practice guidelines is not satisfactory. This study aims to investigate critical factors influencing physicians' intention to computerized clinical practice guideline use through an integrative model of activity theory and the technology acceptance model. The survey methodology was employed to collect data from physicians of the investigated hospitals that have implemented computerized clinical practice guidelines. A total of 505 questionnaires were sent out, with 238 completed copies returned, indicating a valid response rate of 47.1 %. The collected data was then analyzed by structural equation modeling technique. The results showed that attitudes toward using computerized clinical practice guidelines (γ = 0.451, p technology) factors mentioned in the activity theory should be carefully considered when introducing computerized clinical practice guidelines. Managers should pay much attention on those identified factors and provide adequate resources and incentives to help the promotion and use of computerized clinical practice guidelines. Through the appropriate use of computerized clinical practice guidelines, the clinical benefits, particularly in improving quality of care and facilitating the clinical processes, will be realized.

Nasreya: a treatment and disposal facility for industrial hazardous waste in Alexandria, Egypt: phase I.

Science.gov (United States)

Ramadan, Adham R; Kock, Per; Nadim, Amani

2005-04-01

A facility for the treatment and disposal of industrial hazardous waste has been established in Alexandria, Egypt. Phase I of the facility encompassing a secure landfill and solar evaporation ponds is ready to receive waste, and Phase II encompassing physico-chemical treatment, solidification, and interim storage is underway. The facility, the Nasreya Centre, is the first of its kind in Egypt, and represents the nucleus for the integration, improvement and further expansion of different hazardous waste management practices and services in Alexandria. It has been developed within the overall legal framework of the Egyptian Law for the Environment, and is expected to improve prospects for enforcement of the regulatory requirements specified in this law. It has been developed with the overall aim of promoting the establishment of an integrated industrial hazardous waste management system in Alexandria, serving as a demonstration to be replicated elsewhere in Egypt. For Phase I, the Centre only accepts inorganic industrial wastes. In this respect, a waste acceptance policy has been developed, which is expected to be reviewed during Phase II, with an expansion of the waste types accepted.

Contemporary practice education: Exploring student perceptions of an industrial radiography placement for final year diagnostic radiography students

International Nuclear Information System (INIS)

Wareing, A.K.; Henderson, I.

2015-01-01

Introduction: There is a paucity of evidence in diagnostic radiography evaluating a career path into industrial imaging despite several higher education institutes stating this route as a career option on graduation. The link between a career in industrial radiography and diagnostic routes is unknown although there are anecdotal examples of individuals transferring between the two. Successfully obtaining a first post job following graduation in diagnostic radiography can be challenging in the current financial climate. A partnership was formed with an energy sector company that offered non-destructive testing/non-destructive evaluation (NDT/NDE) employing industrial radiographic technicians. Method: As an initial pilot, 5 (n = 5) final year diagnostic radiography students visited an industrial radiography site and underwent theoretical and practical training. Following this placement they engaged in a focus group and the student perceptions/responses were explored and recorded. Results: Common themes were identified and categorised via a thematic analysis. These were; radiation safety, physics and technology, widening access, graduate attributes/transferable skill sets and working conditions. Conclusion: Student discussion focussed around the benefits of working conditions in healthcare, the value of technology, safety and physics education in alternative placements and the transferability of skills into other/industrial sectors (e.g. NDT/NDE). Contemporary practice placements are a useful pedagogical approach to develop complex conceptual theoretical constructs, such as radiation physics. An in depth evaluation between the two industries skill sets is postulated. Additionally, this could offer alternative/emerging roles to interested diagnostic radiographers potentially meeting the skill shortage in industrial radiography. - Highlights: • Research in this area is novel. No evidence could be found to evaluate the links. • Students had theoretical/practical

Development of Graduate Course Education by Industry Collaboration in Center for Engineering Education Development, CEED

Science.gov (United States)

Noguchi, Toru; Yoshikawa, Kozo; Nakamura, Masato; Kaneko, Katsuhiko

New education programs for engineering graduate courses, and the achievements are described. Following the previous reports on overseas and domestic internship2) , 3) , this article states other common programs ; seminars on state of technologies in industries, practical English and internationalization programs, and a program to accept overseas internship students. E-learning system to assist off-campus students is also described. All these programs are developed and conducted by specialist professors invited from industries and national institutions, in collaboration with faculty professors. Students learn how the engineering science apply to the practical problems, acquire wider view and deeper understanding on industries, and gain abilities to act in global society including communication skill, those are not taught in classrooms and laboratories. Educational effects of these industry collaborated programs is significant to activate the graduate course education, although the comprehensive evaluation is the future subject.

Status of maintenance in the US nuclear power industry 1985. Volume 2. Description of programs and practices

International Nuclear Information System (INIS)

1986-06-01

This report documents a review of the status of maintenance programs and practices in the US commercial nuclear power industry. The purpose of this review is to establish a baselines reference for evaluating the effectiveness of future industry activities in maintenance. Two methods used to collect progammatic data. First, a Maintenance Review Protocol was used during site visits to eight selected power plants to collect in-depth maintenance program information. Second, a Maintenance Questionnaire was filled out by NRC Resident Inspectors regarding maintenance programs at their plant. The protocol and questionnaire contained items regarding five broad categories of maintenance: (1) organization and administration, (2) facilities and equipment, (3) procedures, (4) personnel, and (5) work control. The study found that there is wide variability in industry maintenance programs. However, the industry is currently undergoing changes in maintenance practices, and adherence to INPO and NUMARC guidance in maintenance may bring about more systematically developed program practices

Nuclear power project construction quality acceptance standards Implementation and discussion

International Nuclear Information System (INIS)

Lai Shifu

2013-01-01

Project quality construction acceptance is an important element of nuclear power project quality management. Based on characteristics of NPP construction and refer to national construction quality acceptance code and industry regulation, this paper introduces and discusses NPP construction quality acceptance regulation improvement and implementation under current situation. (authors)

consumer preparedness, knowledge, and opinions about practices and regulations of the funeral industry.

Science.gov (United States)

Garman, E T; Kidd, C A

1983-01-01

This study focuses on consumers' level of knowledge, opinions, and degree of preparedness concerning selected practices and regulations of the funeral industry. Questionnaires were returned by 75 percent of the sample of faculty and staff at a large university. Opinions of respondents rejected the status quo concerning various practices and regulations of the funeral industry, indicating a desire to support newly suggested changes in the industry. Preparedness scores indicated that almost 9 out of 10 of the respondents were quite unprepared for their own funerals. The mean achievement score regarding knowledge as measured by the Consumer Funeral Test, which was developed for this study, was 4.0, representing 57 percent correct. Significant statistical relationships existed between knowledge scores and the age, education, and sex of the respondents; those who were older and had more education scored higher, and men scored higher than women. No relationships existed, however, among knowledge, opinion, and preparedness scores and the demographic variables of age, education, income, sex, and religion, raising the fundamental question of the value of funeral information programs for consumers.

Service innovation management practices in the telecommunications industry: what does cross country analysis reveal?

Science.gov (United States)

Rahman, Syed Abidur; Taghizadeh, Seyedeh Khadijeh; Ramayah, T; Ahmad, Noor Hazlina

2015-01-01

Service innovation management practice is currently being widely scrutinized mainly in the developed countries, where it has been initiated. The current study attempts to propose a framework and empirically validate and explain the service innovation practices for successful performance in the telecommunications industry of two developing countries, Malaysia and Bangladesh. The research framework proposes relationships among organisational culture, operating core (innovation process, cross-functional organisation, and implementation of tools/technology), competition-informed pricing, and performance. A total of 176 usable data from both countries are analysed for the purpose of the research. The findings show that organisational culture tends to be more influential on innovation process and cross-functional organisation in Malaysian telecommunication industry. In contrast, implementation of tools/technology plays a more instrumental role in competition-informed pricing practices in Bangladesh. This study revealed few differences in the innovation management practices between two developing countries. The findings have strategic implications for the service sectors in both the developing countries regarding implementation of innovative enterprises, especially in Bangladesh where innovation is the basis for survival. Testing the innovation management practices in the developing countries perhaps contains uniqueness in the field of innovation management.

Constructing Relationships between Science and Practice in the Written Science Communication of the Washington State Wine Industry

Science.gov (United States)

Szymanski, Erika Amethyst

2016-01-01

Even as deficit model science communication falls out of favor, few studies question how written science communication constructs relationships between science and industry. Here, I investigate how textual microprocesses relate scientific research to industry practice in the Washington State wine industry, helping (or hindering) winemakers and…

Practicing industrial safety - issues involved

International Nuclear Information System (INIS)

Gunasekaran, P.

2016-01-01

Industrial safety is all about measures or techniques implemented to reduce the risk of injury, loss to persons, property or the environment in any industrial facility. The issue of industrial safety evolved concurrently with industrial development as a shift from compensation to prevention as well. Today, industrial safety is widely regarded as one of the most important factors that any business, large or small, must consider in its operations, as prevention of loss is also a part of profit. Factories Act of Central government and Rules made under it by the state deals with the provisions on industrial safety legislation. There are many other acts related to safety of personnel, property and environment. Occupational health and safety is also of primary concern. The aim is to regulate health and safety conditions for all employers. It includes safety standards and health standards. These acts encourage employers and employees to reduce workplace hazards and to implement new or improve existing safety and health standards; and develop innovative ways to achieve them. Maintain a reporting and record keeping system to monitor job-related injuries and illnesses; establish training programs to increase the number and competence of occupational safety and health personnel

Analyzing solid waste management practices for the hotel industry

OpenAIRE

S.T. Pham Phu; M.G. Hoang; T. Fujiwara

2018-01-01

The current study aims to analyze waste characteristics and management practices of the hotel industry in Hoi An, a tourism city in the center of Vietnam. Solid wastes from 120 hotels were sampled, the face-to-face interviews were conducted, and statistical methods were carried out to analyze the data. The results showed that the mean of waste generation rate of the hotels was 2.28 kg/guest/day and strongly correlated to internal influencing factors such as the capacity, the price of the room...

Apparel Manufacturing (Course Outline), Industrial Single Needle Machines and Machine Practice: 9377.02.

Science.gov (United States)

Dade County Public Schools, Miami, FL.

This course includes a study of the industrial single needle machine, its principal parts, general care, threading, and basic skills in machine practice. Instructional materials include films, illustration, information sheets, and other materials. (CK)

Industrial-Strength Model-Based Testing - State of the Art and Current Challenges

Directory of Open Access Journals (Sweden)

Jan Peleska

2013-03-01

Full Text Available As of today, model-based testing (MBT is considered as leading-edge technology in industry. We sketch the different MBT variants that - according to our experience - are currently applied in practice, with special emphasis on the avionic, railway and automotive domains. The key factors for successful industrial-scale application of MBT are described, both from a scientific and a managerial point of view. With respect to the former view, we describe the techniques for automated test case, test data and test procedure generation for concurrent reactive real-time systems which are considered as the most important enablers for MBT in practice. With respect to the latter view, our experience with introducing MBT approaches in testing teams are sketched. Finally, the most challenging open scientific problems whose solutions are bound to improve the acceptance and effectiveness of MBT in industry are discussed.

Management Practice of Supply Chain Quality Management in Service-oriented Manufacturing Industry

Directory of Open Access Journals (Sweden)

Gu Ping

2017-01-01

Full Text Available Supply chain quality management (SCQM in service-oriented manufacturing industries is needed in delivering value to customers in all process of supply chain management based on total quality management (TQM. In the paper, we identify the latest themes through reviewing prior quality management and supply chain management(SCM literature. In particular, we find manufacturing firms transform from providing products towards providing services, which means they need to go through fundamental changes especially in supply chains. We use a case study of Heilan Home to illustrate the SCQM themes and their ways in industrial practice. Based on our research, the case study, the experience of working with this firm, we propose a SCQM performance evaluation framework, as well as four strategies for other industries to improve customer satisfaction and added value. In this way can promote the transformation and upgrading of the manufacturing industry in the perspective of quality.

LABOUR SUBCONTRACTING IN THE CONSTRUCTION INDUSTRIES OF DEVELOPING COUNTRIES: AN ASSESSMENT FROM TWO PERSPECTIVES

Directory of Open Access Journals (Sweden)

Jill Wells

2006-06-01

Full Text Available The practice of employing labour through subcontractors (often referred to as the ‘outsourcing’ of labour is both long established and widespread in the construction industries of developing countries. Recent studies show that it is also increasing in both developing and developed countries. An assessment of the advantages of the practice from the viewpoint of the contractors and of the labour force, suggests it is unlikely to disappear. The paper goes on to explore the implications for the development of the construction industry, as well as for the welfare of the workers and the achievement of broader development objectives. It is concluded that interventions may be needed to deal with some of the negative repercussions, but they have to accept and build on current labour practices.

A survey of food allergen control practices in the U.S. food industry.

Science.gov (United States)

Gendel, Steven M; Khan, Nazleen; Yajnik, Monali

2013-02-01

Despite awareness of the importance of food allergy as a public health issue, recalls and adverse reactions linked to undeclared allergens in foods continue to occur with high frequency. To reduce the overall incidence of such problems and to ensure that food-allergic consumers have the information they need to prevent adverse reactions, it is important to understand which allergen control practices are currently used by the food industry. Therefore, the U.S. Food and Drug Administration carried out directed inspections of registered food facilities in 2010 to obtain a broader understanding of industry allergen control practices in the United States. The results of these inspections show that allergen awareness and the use of allergen controls have increased greatly in the last decade, but that small facilities lag in implementing allergen controls.

Improvement in Cuba of the regulatory mark in the industrial X-ray practice

International Nuclear Information System (INIS)

Lopez Forteza; Yamil; Quevedo Garcia, Jose R.; Jerez Vegueria, Pablo F.; Dumenigo Gonzalez, Cruz; De la Fuente Puch, Andres; Diaz Guerra, Pedro

2003-01-01

The Cuban regulatory mark as regards nuclear and radiological security until the year 2002 had not had a Guide of Security linked to the practice of Industrial X-ray. The improvement of the national regulatory mark, by the light of the international recommendations and the national experience of the inspection and licensing regulatory activity of this practice took to necessity of the existence of a Guide of Security that allowed in an effective way to make complete the established approaches of security in the Basic Norms of Security (NBS), during the operation of the teams of Industrial X-ray. The present work exposes and they expose the main aspects that are included in this document that they constitute from an or another way precision to that settled down in the NBS

Interactions between non-physician clinicians and industry: a systematic review.

Directory of Open Access Journals (Sweden)

Quinn Grundy

2013-11-01

Full Text Available BACKGROUND: With increasing restrictions placed on physician-industry interactions, industry marketing may target other health professionals. Recent health policy developments confer even greater importance on the decision making of non-physician clinicians. The purpose of this systematic review is to examine the types and implications of non-physician clinician-industry interactions in clinical practice. METHODS AND FINDINGS: We searched MEDLINE and Web of Science from January 1, 1946, through June 24, 2013, according to PRISMA guidelines. Non-physician clinicians eligible for inclusion were: Registered Nurses, nurse prescribers, Physician Assistants, pharmacists, dieticians, and physical or occupational therapists; trainee samples were excluded. Fifteen studies met inclusion criteria. Data were synthesized qualitatively into eight outcome domains: nature and frequency of industry interactions; attitudes toward industry; perceived ethical acceptability of interactions; perceived marketing influence; perceived reliability of industry information; preparation for industry interactions; reactions to industry relations policy; and management of industry interactions. Non-physician clinicians reported interacting with the pharmaceutical and infant formula industries. Clinicians across disciplines met with pharmaceutical representatives regularly and relied on them for practice information. Clinicians frequently received industry "information," attended sponsored "education," and acted as distributors for similar materials targeted at patients. Clinicians generally regarded this as an ethical use of industry resources, and felt they could detect "promotion" while benefiting from industry "information." Free samples were among the most approved and common ways that clinicians interacted with industry. Included studies were observational and of varying methodological rigor; thus, these findings may not be generalizable. This review is, however, the

Interactions between non-physician clinicians and industry: a systematic review.

Science.gov (United States)

Grundy, Quinn; Bero, Lisa; Malone, Ruth

2013-11-01

With increasing restrictions placed on physician-industry interactions, industry marketing may target other health professionals. Recent health policy developments confer even greater importance on the decision making of non-physician clinicians. The purpose of this systematic review is to examine the types and implications of non-physician clinician-industry interactions in clinical practice. We searched MEDLINE and Web of Science from January 1, 1946, through June 24, 2013, according to PRISMA guidelines. Non-physician clinicians eligible for inclusion were: Registered Nurses, nurse prescribers, Physician Assistants, pharmacists, dieticians, and physical or occupational therapists; trainee samples were excluded. Fifteen studies met inclusion criteria. Data were synthesized qualitatively into eight outcome domains: nature and frequency of industry interactions; attitudes toward industry; perceived ethical acceptability of interactions; perceived marketing influence; perceived reliability of industry information; preparation for industry interactions; reactions to industry relations policy; and management of industry interactions. Non-physician clinicians reported interacting with the pharmaceutical and infant formula industries. Clinicians across disciplines met with pharmaceutical representatives regularly and relied on them for practice information. Clinicians frequently received industry "information," attended sponsored "education," and acted as distributors for similar materials targeted at patients. Clinicians generally regarded this as an ethical use of industry resources, and felt they could detect "promotion" while benefiting from industry "information." Free samples were among the most approved and common ways that clinicians interacted with industry. Included studies were observational and of varying methodological rigor; thus, these findings may not be generalizable. This review is, however, the first to our knowledge to provide a descriptive analysis

Risk Acceptance Criteria and/or Decision optimization

DEFF Research Database (Denmark)

Ditlevsen, Ove Dalager

1996-01-01

Acceptance criteria applied in practical risk analysis are recapitulated including the concept of rist profile. Modelling of risk profiles is illustrated on the basis of compound Poisson process models. The current practice of authoritative acceptance criteria formulation is discussed from...... a decision theoretical point of view. It is argued that the phenomenon of risk aversion rather than being of concern to the authority should be of concern to the owner. Finally it is discussed whether there is an ethical problem when formally capitalising human lives with a positive interest rate. Keywords......: Risk acceptance, Risk profile, Compound Poisson model for risk profile, Capitalization of human life, Risk aversion....

Laboratory versus industrial cutting force sensor in tool condition monitoring system

International Nuclear Information System (INIS)

Szwajka, K

2005-01-01

Research works concerning the utilisation of cutting force measures in tool condition monitoring usually present results and deliberations based on laboratory sensors. These sensors are too fragile to be used in industrial practice. Industrial sensors employed on the factory floor are less accurate, and this must be taken into account when creating a tool condition monitoring strategy. Another drawback of most of these works is that constant cutting parameters are used for the entire tool life. This does not reflect industrial practice where the same tool is used at different feeds and depths of cut in sequential passes. This paper presents a comparison of signals originating from laboratory and industrial cutting force sensors. The usability of the sensor output was studied during a laboratory simulation of industrial cutting conditions. Instead of building mathematical models for the correlation between tool wear and cutting force, an FFBP artificial neural network was used to find which combination of input data would provide an acceptable estimation of tool wear. The results obtained proved that cross talk between channels has an important influence on cutting force measurements, however this input configuration can be used for a tool condition monitoring system

Charter of good practices in industrial radiography; Charte de bonnes pratiques en radiographie industrielle

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-01

This document describes good practices in the field of industrial radiography. After having presented the main prevention and radiation protection principles, the actors inside and outside of the company, and actors intervening during an operation subcontracting in industrial radiography, this report analyzes the activity: prerequisites for work preparation, prevention coordination, work preparation, transportation, work achievement, return on experience. It addresses personnel training and information, and the dosimetric and medical monitoring of technicians in industrial radiography. Some aspects are addressed in appendix: principles (justification, optimization, and limitation), regulations, intervention form, exposure form, and so on

Assessment method for analyzing and developing human resource management practices in nuclear power industry

International Nuclear Information System (INIS)

Maeki, E.; Pahkin, K.; Lindstroem, S.; Kurki, A-L.

2014-01-01

Implementation of HRM practices is often devolved from the HRM unit to front line managers and supervisors. However, the implementation of these practices by line managers and supervisors may vary significantly. They may, for example, be unaware of how to implement HRM practices or skeptical towards the effectiveness of the intended practices. Based on the literature, interviews and workshops in the nuclear power industry, a self-assessment method of HRM practices for intra-organizational use was developed. The assessment method was piloted in four nuclear power organizations. The assessment method seems to be a good tool for generating fruitful discussion on HRM practices, finding areas of HRM practices that need to be developed, and triggering peer-to-peer knowledge sharing and learning on HRM practices. (authors)

Safety practices in Jordanian manufacturing enterprises within industrial estates.

Science.gov (United States)

Khrais, Samir; Al-Araidah, Omar; Aweisi, Assaf Mohammad; Elias, Fadia; Al-Ayyoub, Enas

2013-01-01

This paper investigates occupational health and safety practices in manufacturing enterprises within Jordanian industrial estates. Response rates were 21.9%, 58.6% and 70.8% for small, medium and large sized enterprises, respectively. Survey results show that most companies comply with state regulations, provide necessary facilities to enhance safety and provide several measures to limit and control hazards. On the negative side, little attention is given to safety training that might be due to the lack of related regulations and follow-up, financial limitations or lack of awareness on the importance of safety training. In addition, results show that ergonomic hazards, noise and hazardous chemicals are largely present. Accident statistics show that medium enterprises have the highest accident cases per enterprise, and chemical industries reported highest total number of accidents per enterprise. The outcomes of this study establish a base for appropriate safety recommendations to enhance the awareness and commitment of companies to appropriate safety rules.

A survey of environmental and occupational work practices in the automotive refinishing industry of a developing country: Sonora, Mexico.

Science.gov (United States)

Velázquez, Luis; Bello, Dhimiter; Munguia, Nora; Zavala, Andrea; Marin, Amina; Moure-Eraso, Rafael

2008-01-01

The automotive repair and refinishing industry has been studied intensively in industrialized countries, in part due to use of hazardous chemicals such as isocyanates and solvents, but little is known about industry practices in the developing world. The main objective of this paper was to investigate environmental and occupational work practices of this industry in a developing region, Sonora, Mexico. An integrated survey approach maximizes the opportunity for identifying risks as well as reducing risks. This investigation included detailed workplace visits to 41 body shops and 6 paint suppliers, as well as a survey of shop owners and 24 workers. Information was collected on work practices, level of technology in the shops, use of personal protective equipment, consumption and handling of hazardous chemicals and waste, hazard communication, and environmental consciousness. Most shops had little capital, outdated technology for exposure control, poor working conditions, high potential for exposure to hazardous chemicals, and little awareness of environmental and occupational health and safety. We concluded that work practices in the Sonoran auto refinishing industry are unsustainable and may pose a health risk to workers and the environment.

What can industry do to improve acceptance of nuclear energy?

International Nuclear Information System (INIS)

Panossian, J.

1990-01-01

Even though nuclear energy covers approximately a third of the energy needs of Western Europe without having injured anyone or damaging the environment, its development is considerably hindered in many countries by the opposition of a significant part of the public. The majority of those responsible for the energy supply though, is of the opinion that nuclear energy should continue to play at least as great a role in coming years. In order to lead the public to a positive stand towards nuclear energy, the industry must perfect its product and improve the quality of its communication. One cannot afford to be afraid of admitting that the product, nuclear energy, can be even further improved, even if it is currently at a very high level. Experienced suppliers in the field of nuclear energy have great sums of money with which to work, and should continue to invest in development. It is especially important that the existing nuclear power plants demonstrate exemplary company behavior in respect to safety, availability and economy: this is the best proof of the advantages of nuclear energy and that it is harmless. In regards to communication, it is important to remember that resistance disappears if the public can be directly acquainted with the object of its fears. This explains the special interest in tours of nuclear power plants. The manner in which risk is understood also needs our attention. Risk is not easily understood. It is more easily grasped if it is identified with a highest unsurmountable limit value which corresponds with acceptable consequences. Finally, the public must be informed that nuclear energy is the most environmentally safe means of energy production. (author)

23 CFR 750.708 - Acceptance of state zoning.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Acceptance of state zoning. 750.708 Section 750.708... BEAUTIFICATION Outdoor Advertising Control § 750.708 Acceptance of state zoning. (a) 23 U.S.C. 131(d) provide... within areas . . . which are zoned industrial or commercial under authority of State law.” Section 131(d...

Improving acceptance in wind power planning

International Nuclear Information System (INIS)

Hammarlund, K.

1996-01-01

This paper presents important factors and planning procedures for public acceptance of wind power. Opinion surveys in Sweden show that acceptance is connected to the concept of utility rather than the aesthetic values. If wind turbines are confined by the authorities to marginal areas they will not earn their rightful place in the landscape by being of use. A positive attitude in general promotes positive experience of the effects of wind turbines. It is therefore essential to establish a sense of cooperation between the project management and the public. An open dialogue and continuous information will increase the possibilities for acceptance of future development. We must establish new codes of practice in permit processing because policies today contains idealogical and practical contradictions between the development and preservation of landscapes. (author)

Improving acceptance in wind power planning

Energy Technology Data Exchange (ETDEWEB)

Hammarlund, K. [Lund Univ. (Sweden). Dept. of Social and Economic Geography

1996-12-01

This paper presents important factors and planning procedures for public acceptance of wind power. Opinion surveys in Sweden show that acceptance is connected to the concept of utility rather than the aesthetic values. If wind turbines are confined by the authorities to marginal areas, they will not earn their rightful place in the landscape by being of use. A positive attitude in general promotes a positive experience of the effects of wind turbines. It is therefore essential to establish a sense of cooperation between the project management and the public. An open dialogue and continuous information will increase the possibilities for acceptance of future development. We must establish new codes of practice in permit processing because policies today contains ideological and practical contradictions between development and preservation of landscapes. 16 refs, 2 tabs

Evaluation of the Acceptance of Audience Response System by Corporations Using the Technology Acceptance Model

Science.gov (United States)

Chu, Hsing-Hui; Lu, Ta-Jung; Wann, Jong-Wen

The purpose of this research is to explore enterprises' acceptance of Audience Response System (ARS) using Technology Acceptance Model (TAM). The findings show that (1) IT characteristics and facilitating conditions could be external variables of TAM. (2) The degree of E-business has positive significant correlation with behavioral intention of employees. (3) TAM is a good model to predict and explain IT acceptance. (4) Demographic variables, industry and firm characteristics have no significant correlation with ARS acceptance. The results provide useful information to managers and ARS providers that (1) ARS providers should focus more on creating different usages to enhance interactivity and employees' using intention. (2) Managers should pay attention to build sound internal facilitating conditions for introducing IT. (3) According to the degree of E-business, managers should set up strategic stages of introducing IT. (4) Providers should increase product promotion and also leverage academic and government to promote ARS.

Industrial chemistry engineering

International Nuclear Information System (INIS)

1993-01-01

This book on industrial chemistry engineering is divided in two parts. The first part deals with industrial chemistry, inorganic industrial chemistry, organic industrial chemistry, analytical chemistry and practical questions. The last parts explain the chemical industry, a unit parts and thermodynamics in chemical industry and reference. It reveals the test subjects for the industrial chemistry engineering with a written examination and practical skill.

How is Acceptable Public Risk Determined?

International Nuclear Information System (INIS)

Treichel, Judy

2001-01-01

Acceptance of risk is a value-based decision, that is, the acceptance of risk by a person or group of persons depends on the values of the person or the shared values of the group. In the case of nuclear waste management, the nuclear industry, the regulators, and the general public approach risk from entirely different perspectives, dictated by the separate value systems held by each. The utilities producing radioactive waste view risk assessment as a part of a business decision that involves costs and benefits. The values that drive public acceptance of a national nuclear waste management policy are very different. As stated by Peter Montague of the Environmental Research Foundation: 'The only people I know who are enthusiastic about quantitative risk assessment are people who want to gain permission to expose other humans to dangerous chemicals so someone can make money. Risk assessment has proven to be an effective way to gain the necessary permissions'. Between the industry and the public are the regulators. Most national governments require regulatory agencies to establish rules that provide adequate public safety while allowing industries, whether nuclear or other producers of public commodities, to profitably do business. The general population has always had a fragile relationship with nuclear proponents. There is an atmosphere of mistrust based on the understanding that the values that matter to the general public differ tremendously from those purported by the industry and regulators. The general public is more interested in worst case scenarios; that is, what is the most severe negative consequence to their safety and the safety of their children that could result from nuclear projects. There is no cost or benefit more important to the general public than the health and safety of their families. The rift in values creates a great disparity in proposed solutions to the nuclear waste question. Regulators regard public acceptance of a risk-informed policy

How is Acceptable Public Risk Determined?

Energy Technology Data Exchange (ETDEWEB)

Treichel, Judy [Nevada Nuclear Waste Task Force, Las Vegas, NV (United States)

2001-07-01

Acceptance of risk is a value-based decision, that is, the acceptance of risk by a person or group of persons depends on the values of the person or the shared values of the group. In the case of nuclear waste management, the nuclear industry, the regulators, and the general public approach risk from entirely different perspectives, dictated by the separate value systems held by each. The utilities producing radioactive waste view risk assessment as a part of a business decision that involves costs and benefits. The values that drive public acceptance of a national nuclear waste management policy are very different. As stated by Peter Montague of the Environmental Research Foundation: 'The only people I know who are enthusiastic about quantitative risk assessment are people who want to gain permission to expose other humans to dangerous chemicals so someone can make money. Risk assessment has proven to be an effective way to gain the necessary permissions'. Between the industry and the public are the regulators. Most national governments require regulatory agencies to establish rules that provide adequate public safety while allowing industries, whether nuclear or other producers of public commodities, to profitably do business. The general population has always had a fragile relationship with nuclear proponents. There is an atmosphere of mistrust based on the understanding that the values that matter to the general public differ tremendously from those purported by the industry and regulators. The general public is more interested in worst case scenarios; that is, what is the most severe negative consequence to their safety and the safety of their children that could result from nuclear projects. There is no cost or benefit more important to the general public than the health and safety of their families. The rift in values creates a great disparity in proposed solutions to the nuclear waste question. Regulators regard public acceptance of a risk

Thinking Globally: How ISO 50001 - Energy Management can make industrial energy efficiency standard practice

Energy Technology Data Exchange (ETDEWEB)

McKane, Aimee; Desai, Deann; Matteini, Marco; Meffert, William; Williams, Robert; Risser, Roland

2009-08-01

Industry utilizes very complex systems, consisting of equipment and their human interface, which are organized to meet the production needs of the business. Effective and sustainable energy efficiency programs in an industrial setting require a systems approach to optimize the integrated whole while meeting primary business requirements. Companies that treat energy as a manageable resource and integrate their energy program into their management practices have an organizational context to continually seek opportunities for optimizing their energy use. The purpose of an energy management system standard is to provide guidance for industrial and commercial facilities to integrate energy efficiency into their management practices, including fine-tuning production processes and improving the energy efficiency of industrial systems. The International Organization for Standardization (ISO) has identified energy management as one of its top five priorities for standards development. The new ISO 50001 will establish an international framework for industrial, commercial, or institutional facilities, or entire companies, to manage their energy, including procurement and use. This standard is expected to achieve major, long-term increases in energy efficiency (20percent or more) in industrial, commercial, and institutional facilities and to reduce greenhouse gas (GHG) emissions worldwide.This paper describes the impetus for the international standard, its purpose, scope and significance, and development progress to date. A comparative overview of existing energy management standards is provided, as well as a discussion of capacity-building needs for skilled individuals to assist organizations in adopting the standard. Finally, opportunities and challenges are presented for implementing ISO 50001 in emerging economies and developing countries.

Theory and Practice Meets in Industrial Process Design -Educational Perspective-

Science.gov (United States)

Aramo-Immonen, Heli; Toikka, Tarja

Software engineer should see himself as a business process designer in enterprise resource planning system (ERP) re-engineering project. Software engineers and managers should have design dialogue. The objective of this paper is to discuss the motives to study the design research in connection of management education in order to envision and understand the soft human issues in the management context. Second goal is to develop means of practicing social skills between designers and managers. This article explores the affective components of design thinking in industrial management domain. In the conceptual part of this paper are discussed concepts of network and project economy, creativity, communication, use of metaphors, and design thinking. Finally is introduced empirical research plan and first empirical results from design method experiments among the multi-disciplined groups of the master-level students of industrial engineering and management and software engineering.

Acceptability, Feasibility and Feedback Analysis of Perception for Objective Structured Practical Examination As an Assessment Tool in Undergraduate in Competency Based Medical Education

Directory of Open Access Journals (Sweden)

Harsha V. Patil

2016-04-01

Full Text Available Background: There is an increasing tendency to use Objective Structured Practical examination (OSPE as an evaluation tool of practical performance in medical education. Aim and Objectives: The objective of the present study was to determine the acceptability and feasibility of OSPE as an assessment tool of formative examination by feedback analysis in the microbiology nd subject in 2 year MBBS undergraduate students and to discuss the pros and cons of OSPE method. Material and Methods: A well organized comprehensive ten OSPE stations were arranged to assess the practical nd skills of 2 year MBBS students in the department of microbiology. The practical performance skill of 50 second year undergraduate MBBS students were assessed by OSPE for microbiology subject by creating 10 structured stations of OSPE. The stations were written so as to cover major important practical nd microbiology topics of 2 year MBBS. The practical tasks chosen for the OSPE were mapped as per learning objectives of the course and the expected level of learning of the students. Results: A qualitative feedback from the examiners/ observers and the students was taken to assess acceptability feasibility of OSPE assessment. The examiners and the students were asked to rate OSPE by five point Likert scale Questionnaires. For the majority of students (92% and examiners/ observers (100% OSPE session was acceptable (p < 0.001. All examiners perceived OSPE method as feasible assessment tool (p < 0.001. Majority of the examiners and the students were in agreement or strongly in agreement in Likert scale rating for feedback analysis of OSPE session. There was no significant statistical difference among students and examiners/observers (Chi-squre:1.5184; DF:5; p= 0.8234. Conclusions: The OSPE is reliable and reproducible practical assessment tool and yields dependable information about the practical performance capabilities and competence of individual student and can be used as an

Survey on Ethical Conduct Thresholds in Cardiologal Medical Practice in Argentina.

Science.gov (United States)

Doval, Hernán C; Tajer, Carlos D; Borracci, Raúl A; Nuñez, Carmen; Samarelli, Marisa; Tamini, Susana

2015-08-01

The purpose of this study was to analyze the attitude of a group of cardiologists on the ethical conducts they would accept or adopt when encountered with different hypothetical situations of medical practice. Between August and September of 2011, 700 Argentine cardiologists were surveyed in situations which posed ethical dilemmas in the patient-physician relationship, among colleagues or involving financial agreements with employers or the pharmaceutical industry. Ethical conflicts were evidenced in a series of inappropriate conducts such as differential fees, trips and meals sponsored by laboratories, splitting fees, overbilling, self-referral, charging for patient referral, financial compensation for ordering medical procedures, and various situations derived from the relationship with employers. In general, financial compensation from the pharmaceutical industry was more accepted than the conflictive situations which directly involved patients, colleagues or employers. The rejection of these conducts, the physicians' deontological education and the improvement of financial and organizational conditions in medical practice will help to encourage better medical professionalism and avoid unseemly behaviors. © 2013 John Wiley & Sons Ltd.

A Simulation-Based Blended Curriculum for Short Peripheral Intravenous Catheter Insertion: An Industry-Practice Collaboration.

Science.gov (United States)

Glover, Kevin R; Stahl, Brian R; Murray, Connie; LeClair, Matthew; Gallucci, Susan; King, Mary Anne; Labrozzi, Laura J; Schuster, Catherine; Keleekai, Nowai L

2017-09-01

Despite peripheral intravenous catheter (PIVC) insertion being a commonly performed skill, practicing nurses may receive little substantive education, training, or opportunities to practice this skill at a competent level. This article describes a collaboration between private industry and a hospital to modify, implement, and evaluate a simulation-based blended PIVC insertion continuing education program for staff nurses. Included is an overview of the practical and theoretical rationale for the initial development of the curriculum to address an identified PIVC insertion education gap, the collaborative modification and implementation of the program, and an evaluation of the program. The curriculum combined self-paced e-learning and classroom-based deliberate practice with simulation tools of varying fidelity in a peer-to-peer learning environment. Given the mutual challenges of resource allocation in industry training and clinical nursing education departments, interprofessional partnerships may be an effective option for sharing instructional knowledge and resources to promote innovation and improve patient care. J Contin Educ Nurs. 2017;48(9):397-406. Copyright 2017, SLACK Incorporated.

Best Manufacturing Practices: Report of Survey Conducted at Headquarters, U.S. Army Industrial Operations Command, ROck Island, IL

National Research Council Canada - National Science Library

Renner, Ernie

1997-01-01

This report was produced by the Best Manufacturing Practices (BMP) program, a unique industry and government cooperative technology transfer effort that improves the competitiveness of America's industrial base both here and abroad...

Practical approach in training (on-the-job) for workers in nuclear industries

International Nuclear Information System (INIS)

Vianna, Vilson Bedim; Rocha, Janine Gandolpho da

2005-01-01

This work approaches the 'on-the-job training' - a method of practical training - used in nuclear industries for workers who handle radioactive nuclides. The required training must, in accordance with the ISO 9000 standard, be geared to meet the needs of the organization, including the minimization of errors in operation with radionuclides, which involves various aspects (standard, social, environmental, personal and process safety etc.). Therefore, the training process must have the commitment of everybody and have a logical and documented sequence, where both the individual and the needs of the company are raised and analyzed. The clear identification of the radiological risks associated to the hands-on training is critical to the safety of who is being trained and should be part of the training content. However, the greatest challenge is a mechanism allowing to transform the hands-on training in practical learning. The role of training in the modern nuclear industry should not be restricted to provide conditions for better training or development of the employee, but also motivate the continuous improvement of the company and of the productive process

The interactive animated epilepsy education programme (IAEEP): how feasible, acceptable and practical is the technology to children?

Science.gov (United States)

Lua, Pei Lin; Neni, Widiasmoro Selamat; Lee, Jimmy Kok Foo; Abd Aziz, Zariah

2013-01-01

Being well-informed and knowledgeable about their illnesses would be a great advantage to children with epilepsy (CWE). Subsequently, an effective education programme which could secure interest and simultaneously improve their awareness, knowledge and attitudes (AKA) is essential in enhancing well-being and health outcomes. To describe the development of a new interactive animated epilepsy education programme (IAEEP) for children and to assess its feasibility, acceptability and practicality. The IAEEP was developed by an interdisciplinary group of neurologist, paediatrician, pharmacist, biomedical scientist and educators which was based on two established epilepsy education programmes: the educational programme for patients with epilepsy and their relatives (MOSES) and the modular educational program for children with epilepsy and their parents (FAMOSES). CWE from paediatric department of three general hospitals in Terengganu were initially introduced to the IAEEP and were requested to complete an evaluation form assessing its feasibility, acceptability and practicality. Descriptive statistics were employed for data analyses (SPSS 20.0). Sixteen CWE (median age=13.0; male=56.2%; Malay=81.2%; secondary school=56.2%) and their corresponding parents were recruited. Each CWE owned at least a computer/notebook/tablet (100%). The cost of distribution of IAEEP (in compact disc form) among CWE was estimated at about MYR 17.99/USD 5.90 per CWE. The average time required to interact with the programme was 22.8 minutes (SD=3.3, range 18-28 minutes). The programme was 100% acceptable and received full support from both CWE and their parents (100%). The favourable findings from this study add to the growing evidence suggesting that investment in interactive and animated education programme would be both feasible, well-received by patients and could be a potentially valuable approach to increase access and effectiveness of epilepsy care especially among CWE.

1991 Acceptance priority ranking

International Nuclear Information System (INIS)

1991-12-01

The Standard Contract for Disposal of Spent Nuclear Fuel and/or High- Level Radioactive Waste (10 CFR Part 961) that the Department of Energy (DOE) has executed with the owners and generators of civilian spent nuclear fuel requires annual publication of the Acceptance Priority Ranking (APR). The 1991 APR details the order in which DOE will allocate Federal waste acceptance capacity. As required by the Standard Contract, the ranking is based on the age of permanently discharged spent nuclear fuel (SNF), with the owners of the oldest SNF, on an industry-wide basis, given the highest priority. the 1991 APR will be the basis for the annual allocation of waste acceptance capacity to the Purchasers in the 1991 Annual Capacity Report (ACR), to be issued later this year. This document is based on SNF discharges as of December 31, 1990, and reflects Purchaser comments and corrections, as appropriate, to the draft APR issued on May 15, 1991

Health promoting leadership practices in four Norwegian industries.

Science.gov (United States)

Skarholt, Kari; Blix, Elisabeth H; Sandsund, Mariann; Andersen, Thale K

2016-12-01

The aim of this article is to address health promoting leadership; what do leaders actually do to promote health at work? Leadership practice plays a crucial role in the workplace and greatly affects the working environment and working conditions. Through a theoretical and empirical approach, we seek to find characteristics/patterns of health promoting leadership. The definition of health promoting leadership is a democratic and supportive leadership style, where leaders seek to motivate and inspire their employees. The study in this article is based on qualitative research methods. We have investigated and compared leadership practice in four different organizations/industries in Norway: construction, oil and gas, health care and cleaning. These organizations and professions are quite different, and thus leadership must be understood and developed within its context. However, we found some generic characteristics of health promoting leadership: hands-on, accessible, supportive, inclusive and democratic. Current literature only rarely addresses how leadership affects health promotion at work. Consequently, more knowledge is needed about how leaders really succeed in creating healthy workplaces and healthy employees. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Education-industry partnership: the chemical industry experience

International Nuclear Information System (INIS)

Bricknell, D.J.

1994-01-01

The European Chemical Industry and the Nuclear Power Industry share similar problems and hopefully can share similar solutions to them. A recent survey of public opinion conducted on behalf of the chemical industry has shown that the general public knows little about the industry and does not trust it to behave responsibly. The industry is responding in two ways: firstly to demonstrate that it is a responsible member of the community by operating to the highest safety and environmental standards and by being open in its dealings with the public on such matters. Secondly the industry is working with the education system to ensure that the public has the opportunity to gain a good education in science, is able to make rational judgments about risks and benefits and is better able to understand and accept the role of the chemical industry in society

Assessment method for analyzing and developing human resource management practices in the nuclear power industry

International Nuclear Information System (INIS)

Maeki, Eerikki; Pahkin, Krista; Lindstroem, S.; Kurki, Anna-Leena

2015-01-01

Implementation of HRM practices is often devolved from the HRM unit to front line managers and supervisors. However, the implementation of these practices by line managers and supervisors may vary significantly. They may, for example, be unaware of how to implement HRM practices or sceptical towards the effectiveness of the intended practices. Based on the literature, interviews and workshops in the nuclear power industry, a self-assessment method of HRM practices for intra-organizational use was developed. The assessment method was piloted in four nuclear power organizations. The assessment method seems to be a good tool for generating fruitful discussion on HRM practices, finding areas of HRM practices that need to be developed, and triggering peer-to-peer knowledge sharing and learning on HRM practices.

Assessment method for analyzing and developing human resource management practices in the nuclear power industry

Energy Technology Data Exchange (ETDEWEB)

Maeki, Eerikki [Aalto Univ. (Finland). Dept. of Industrial Engineering and Management; Pahkin, Krista; Lindstroem, S.; Kurki, Anna-Leena [Finnish Institue of Occupational Health, Helsinki (Finland). Centre of Expertise for the Development of Work and Organizations

2015-04-15

Implementation of HRM practices is often devolved from the HRM unit to front line managers and supervisors. However, the implementation of these practices by line managers and supervisors may vary significantly. They may, for example, be unaware of how to implement HRM practices or sceptical towards the effectiveness of the intended practices. Based on the literature, interviews and workshops in the nuclear power industry, a self-assessment method of HRM practices for intra-organizational use was developed. The assessment method was piloted in four nuclear power organizations. The assessment method seems to be a good tool for generating fruitful discussion on HRM practices, finding areas of HRM practices that need to be developed, and triggering peer-to-peer knowledge sharing and learning on HRM practices.

Evaluation of conventional electric power generating industry quality assurance and reliability practices

Energy Technology Data Exchange (ETDEWEB)

Anderson, R.T.; Lauffenburger, H.A.

1981-03-01

The techniques and practices utilized in an allied industry (electric power generation) that might serve as a baseline for formulating Quality Assurance and Reliability (QA and R) procedures for photovoltaic solar energy systems were studied. The study results provide direct near-term input for establishing validation methods as part of the SERI performance criteria and test standards development task.

The competent person in radiation protection: practical radiation protection for industry and research - unsealed sources

International Nuclear Information System (INIS)

Bruchet, H.

2009-01-01

The mission of the competent person in radiation protection has been broadly developed these last years to take an essential function in firm:study of working place, delimitation of regulated areas, monitoring of exposure, relations with authorities. The competent person in radiation protection must follow a training, defined by decree and shared in two parts: a theoretical part used as compulsory subjects and a practical part specific to the different sectors of activity (research, industry, medical centers, nuclear facilities) as well as the radiation use type. This volume corresponds to the practical module devoted to the industrial and research facilities concerned by the possession of management of sealed or unsealed sources. In accordance with the regulations stipulating that this module must allow to apply the theoretical knowledge to concrete situations in work. It includes eight chapters as following: radiation protection in industrial and research facilities, use of sources and associated risks, fitting out professional premises, evaluation of exposure, control of radiation protection; use of detection equipment and radioactive contamination and exposure measurement equipment, associated to methods and calculation tools; radioactive waste management; accidental or damaged situations management; methodology of working place analysis completed by the application to practical cases found in laboratories. (N.C.)

From a Music Industry to Sound Industries

OpenAIRE

Thor Magnusson

2013-01-01

Commodification has been an inherent aspect of music for many centuries. The aggregation of the diverse commodification practices could be described as an "industry," but this is an industry that has always been in a state of transition. New technologies, media formats, and practices appear regularly, requiring swift responses by the incumbent music industry. Although periods of relative stabil- ity have existed, where economic structures become established, the field has always been ch...

Addressing Cross-Cultural Teamwork Barriers: Implications for Industry Practice and Higher Education Curricula

Science.gov (United States)

Levitt, Steven R.

2016-01-01

This study explores cultural factors affecting international team dynamics and the implications for industry practice and higher education. Despite decades of studying and experience with cultural diversity, international work groups continue to be challenged by ethnocentrism and prejudices. Central to the context is that cultural differences in…

A revisit on the current practice of dispute resolution and ADR in the Malaysian construction industry

Directory of Open Access Journals (Sweden)

Mohd Suhaimi Mohd Danuri

2012-06-01

Full Text Available The current dispute resolution procedures available in the Malaysian construction industry are mainly litigation and arbitration. In addition, the alternative dispute resolutions (ADR, namely mediation and adjudication, have also been introduced as the other methods for resolving disputes. The objective of this study is to examine the current practice of dispute resolution and ADR available in the Malaysian construction industry. The aim of this paper is two-fold: to report the current practice of dispute resolution and ADR, and identify the attributes of successful implementation of both mechanisms based on the perceptions of the Malaysian construction industry players. From the jurisprudence point of view, this study looks into the law as it is, in relation to the current practice of dispute resolution and ADR, by showing how those findings can be used to explain why improvement is needed to promote a successful and well received dispute resolution and ADR, and what lessons can be learnt, towards the formulation of a more viable methods for the Malaysian construction industry. NVivo software has been used to manage and organise the complete interview transcripts and facilitate the data analysis process for this study. Literature review reveals a continuous development of dispute resolution and ADR in the Malaysian construction industry, while, globally the industry has not only embraced ADR but also spearheaded the development of innovative forms of dispute avoidance mechanism. The findings of interviews show that locally, apart from litigation, the common types of ADR are arbitration, mediation and ad hoc mechanism. The findings also lead to the discovery of the following attributes: faster, less procedural, cost effective and enforceable; regulation and government's support; professionalism and ethic; training; and facility, that may promote a successful implementation of dispute resolution and ADR in Malaysia.

Corrosion and anticorrosion. Industrial practice

International Nuclear Information System (INIS)

Beranger, G.; Mazille, H.

2002-01-01

This book comprises 14 chapters written with the collaboration of about 50 French experts of corrosion. It is complementary to another volume entitled 'corrosion of metals and alloys' and published by the same editor. This volume comprises two parts: part 1 presents the basic notions of corrosion phenomena, the properties of surfaces, the electrochemical properties of corrosion etc.. Part 2 describes the most frequent forms of corrosion encountered in industrial environments and corresponding to specific problems of protection: marine environment, atmospheric corrosion, galvanic corrosion, tribo-corrosion, stress corrosion etc.. The first 8 chapters (part 1) treat of the corrosion problems encountered in different industries and processes: oil and gas production, chemical industry, phosphoric acid industry, PWR-type power plants, corrosion of automobile vehicles, civil engineering and buildings, corrosion of biomaterials, non-destructive testing for the monitoring of corrosion. The other chapters (part 2) deal with anticorrosion and protective coatings and means: choice of materials, coatings and surface treatments, thick organic coatings and enamels, paints, corrosion inhibitors and cathodic protection. (J.S.)

How to implement and apply robust design: insights from industrial practice

DEFF Research Database (Denmark)

Krogstie, Lars; Ebro, Martin; Howard, Thomas J.

2015-01-01

. Empirical findings are based on a series of semi-structured interviews with four major engineering companies in Northern Europe. We present why they were motivated to use RD, how it has been implemented and currently applied. Success factors for solving implementation challenges are also presented......Robust design (RD) is a framework for designing products and processes which perform consistently in spite of variations. Although it is well described in literature, research shows limited industrial application. The purpose of this paper is to describe and discuss industrial best-practice on RD...... have all been successful in using RD but with quite different approaches, depending on, for example, their organisational culture, and (3) Not just management commitment, but also true management competencies in RD are essential for a successful implementation. The paper is aimed at professionals...

WHY RESTAURANTS SHOULD GO GREEN? – MAIN ENVIRONMENTAL PRACTICES IN RESTAURANTS INDUSTRY

Directory of Open Access Journals (Sweden)

Stefan-Dragos CÎRSTEA

2015-11-01

Full Text Available Hospitality businesses influence the sustainability of their natural environment by consuming significant amounts of natural resources. Restaurant industry employs one in every three retail workers and consumes one-third of all retail electricity use and almost 30% of all meals were eaten away from home, last year. This study attempted to identify the most important benefits obtained from green practices implementation and which are the basic environmental practices that can be adopted by the organisations in order the improve their image and reduce their costs. Moreover, our research has been undertaken in parallel with worldwide existing trends in order to better understand the direction in which green restaurants are moving. This study results inventories the main environmental practices and actions that can be implemented in restaurants.

The Practicality of Cooperative Education between an Industry and University

Science.gov (United States)

Oomichi, Takeo; Jianming, Yang; Matsubara, Takenori; Tatsuno, Kyoichi; Takahashi, Tomoichi

Some cooperative methods have been proposed and executed as the R&D (research and development) between universities and industries meld together to form a new hybeid business. This paper proposes the ides of “Fusion Education” for the advancement of education and for fostering new business. In fusion education, university students will begin by mainly verifying the application potential of a developed system such as modulated robotic software, for example, and improve specific areas when and if needed. Then, the university will rank the systems according to its reliability or safety record (based on the student) complete verification test which includes data on when the robot will be operated and under what varying conditions (such as performance in various private houses). The university essentially gives students the chance to find a solution to practical problems while the industry gets a reliable (fully authorized) system as result of this education process. The concept and feasibility of this “fusion education” will now be discussed.

Patient acceptability and practical implications of pharmacokinetic studies in patients with advanced cancer.

Science.gov (United States)

Dobbs, N A; Twelves, C J; Ramirez, A J; Towlson, K E; Gregory, W M; Richards, M A

1993-01-01

We have studied the practical implications and acceptability to patients of pharmacokinetic studies in 34 women receiving anthracyclines for advanced breast cancer. The following parameters were recorded: age, ECOG performance status, psychological state (Rotterdam Symptom Checklist), cytotoxic drug and dose, number of venepunctures for treatment and sampling, and time when the sampling cannula was removed. Immediately after finishing pharmacokinetic sampling, patients completed a questionnaire which revealed that (i) all patients understood sampling was for research, (ii) 35% of patients experienced problems with sampling, (iii) benefits from participation were perceived by 56% of patients. Of 20 patients later questioned after completion of their treatment course, 40% recalled difficulties with blood sampling. Factors identifying in advance those patients who tolerate pharmacokinetic studies poorly were not identified but the number of venepunctures should be minimised. Patients may also perceive benefits from 'non-therapeutic' research.

[Acceptance and Commitment Therapy: Theoretical background and practice].

Science.gov (United States)

Eisenbeck, Nikolett; Schlosser, Károly Kornél; Szondy, Máté; Szabó-Bartha, Anett

The Acceptance and Commitment Therapy (ACT) is one of the modern, so-called third-wave behavioural therapies. Among them the most successful is ACT, both in the number of therapists and respective scientific research. ACT's theoretical and philosophical background is described explicitly and its therapeutic interventions were developed according to this philosophy. Its psychopathological model is based on the idea that mainly the person's regulatory efforts of their own thoughts and feelings lead to psychological problems. That is, the source of human suffering and various psychological problems is the so called psychological inflexibility: control attempts of private events instead of living a life based on personal values and long-term goals. Therefore, clinical work in ACT focuses on the acceptance and defusion of the unwanted inner experiences and on the development of a meaningful life. The present article aims to provide a comprehensive description of ACT in Hungarian: its theoretical background, clinical techniques, and efficacy. At the end of the article, the state of ACT in Hungary will also be briefly discussed.

The illusion of righteousness: corporate social responsibility practices of the alcohol industry.

Science.gov (United States)

Yoon, Sungwon; Lam, Tai-Hing

2013-07-03

Corporate social responsibility (CSR) has become an integral element of how the alcohol industry promotes itself. The existing analyses of CSR in the alcohol industry point to the misleading nature of these CSR practices. Yet, research has been relatively sparse on how the alcohol industry advances CSR in an attempt to facilitate underlying business interests, and in what ways the ongoing display of industry CSR impacts public health. This paper aims to investigate the alcohol industry's recent CSR engagements and explain how CSR forms part of the industry's wider political and corporate strategies. Our study used qualitative methods to collect and analyse data. We searched for materials pertaining to CSR activities from websites of three transnational alcohol corporations, social media platforms, media reports and other sources. Relevant documents were thematically analysed with an iterative approach. Our analysis identified three CSR tactics employed by the alcohol companies which are closely tied in with the industry's underlying corporate intents. First, the alcohol manufacturers employ CSR as a means to frame issues, define problems and guide policy debates. In doing this, the alcohol companies are able to deflect and shift the blame from those who manufacture and promote alcoholic products to those who consume them. Second, the alcohol corporations promote CSR initiatives on voluntary regulation in order to delay and offset alcohol control legislation. Third, the alcohol corporations undertake philanthropic sponsorships as a means of indirect brand marketing as well as gaining preferential access to emerging alcohol markets. The increasing penetration and involvement of the alcohol industry into CSR highlights the urgent needs for public health counter actions. Implementation of any alcohol control measures should include banning or restricting the publicity efforts of the industry's CSR and informing the public of the alcohol industry's notion of social

Public acceptance of radioactive waste transportation systems

International Nuclear Information System (INIS)

Gablin, K.A.

1978-01-01

As the thoughts of the country concentrate on the problems of transportation of waste through high traffic urban areas, the problem of how to deal directly and honestly with the public takes on greater significance in the nuclear industry. Non-technical aspects of the methods of transportation, especially by railroad and highway, enter into the total scheme of moving radioactive waste from both weapon and nuclear power plant sources to final processing and disposal. Factors such as shape, color, size, familiarity, and industrial designing are necessary ingredients that take on equal or more significance that the designing of containers to survive the hypothetical accident conditions of the present, or even of the future. Protective Packaging, Inc. has been a leader in the presentation of containers to the private and public sector of the nuclear industry. The products have undergone very open testing, in public, with both invited and uninvited witnesses. In those experiences, dating back to 1969, the problems of public acceptance will be related between the technical problems and the associated social and political problems that relate to container acceptance by the public in today's world. Proven experience data, relative to the safety of the present day systems will be discussed, as well as methods of improving the image in the future. Review will also be given to the effort by industry to discuss the proven record with parties outside the nuclear industry, i.e., individuals and pressure groups that are diametrically opposed to review the facts relative to safety as opposed to other, but more traditional industries

World Best Practice Energy Intensity Values for SelectedIndustrial Sectors

Energy Technology Data Exchange (ETDEWEB)

Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky,Christina; Zhou, Nan

2007-06-05

"World best practice" energy intensity values, representingthe most energy-efficient processes that are in commercial use in atleast one location worldwide, are provided for the production of iron andsteel, aluminium, cement, pulp and paper, ammonia, and ethylene. Energyintensity is expressed in energy use per physical unit of output for eachof these commodities; most commonly these are expressed in metric tonnes(t). The energy intensity values are provided by major energy-consumingprocesses for each industrial sector to allow comparisons at the processlevel. Energy values are provided for final energy, defined as the energyused at the production facility as well as for primary energy, defined asthe energy used at the production facility as well as the energy used toproduce the electricity consumed at the facility. The "best practice"figures for energy consumption provided in this report should beconsidered as indicative, as these may depend strongly on the materialinputs.

Feasibility, Acceptability, and Clinical Trends of a Mindfulness-Informed Child Welfare Intervention: Implications for Trauma-Focused Practice

Directory of Open Access Journals (Sweden)

Samantha M. Brown

2017-09-01

Full Text Available Exposure to stress and early life trauma have been linked to child maltreatment and parental substance misuse. These issues often co-occur, yet few child welfare services target their shared underlying causes in a single intervention. Teaching mindfulness-informed strategies to substance-misusing families in the child welfare system may be one promising trauma-informed approach. As part of a larger pilot study testing the initial efficacy of a mindfulness-informed intervention for parents in public child welfare, this study explored the feasibility, acceptability, and clinical trends of the intervention using weekly reports of stress, coping, and mindfulness. Findings show support for the feasibility and acceptability of the intervention as well as positive responses to the intervention on measures of stress and mindfulness. However, the impact of the intervention varied with regard to improving weekly coping among participants. Implications for the integration of mindfulness into child welfare practice as a trauma-informed approach are discussed.

Workload based order acceptance in job shop environments

NARCIS (Netherlands)

Ebben, Mark; Hans, Elias W.; Olde Weghuis, F.M.; Olde Weghuis, F.M.

2005-01-01

In practice, order acceptance and production planning are often functionally separated. As a result, order acceptance decisions are made without considering the actual workload in the production system, or by only regarding the aggregate workload. We investigate the importance of a good workload

A Profile of Current Employee Training Practices in Selected Businesses and Industries in Southwest Virginia

OpenAIRE

Hundley, Katrina M.

2003-01-01

The purposes of this study were to (a) establish a profile of the current training practices of selected businesses and industries in Southwest Virginia; (b) identify the type of training methods these companies are choosing -- such as traditional classroom training or web-based training programs, and (c) identify how the training methods are selected. This profile established baseline data for current business and industry employee training programs. The population of this study include...

Impact of CRM practices on service quality in the banking industry

Directory of Open Access Journals (Sweden)

Sana Hafeez

2017-06-01

Full Text Available The present study investigates the impact of customer relationship management practices on the service quality in the banking sector. CRM practices have been found to greatly influence not only the customer satisfaction and loyalty but also the quality of services provided by organization. The study focuses on three CRM practices of Attitude towards clients, Efficiency of banking services and Knowledge ability and their impact on the service quality. As customers are more aware about the services so they ensure service quality. Employee’s knowledge ability helps customers to gain experience that actually leads towards service quality and efficiency in services provided by the banks also help in service quality. The study used survey design and the sample consisted of 230 respondents. These respondents were customers of different banks in the city of Rawalpindi, Pakistan. The results indicate that knowledge ability of employees and attitude towards clients is having significant influence on service quality. However, CRM practice of Efficiency of banking services was found to be insignificant. The study has managerial implications for the banking industry. The study also provides future directions.

76 FR 4360 - Guidance for Industry on Process Validation: General Principles and Practices; Availability

Science.gov (United States)

2011-01-25

... and Development (HFM-40), Center for Biologics Evaluation and Research (CBER), Food and Drug...] Guidance for Industry on Process Validation: General Principles and Practices; Availability AGENCY: Food... of Drug Information, Center for Drug Evaluation and Research, Food and Drug Administration, 10903 New...

Encouraging Learning of Industry Technology: A Merchandising Example

Science.gov (United States)

Reilly, Andrew; Huss, Megan; Stoel, Leslie

2005-01-01

The application of the technology acceptance model to a merchandising course teaching industry software was evaluated. Based on technology acceptance research, industry software was presented emphasizing ease-of-use and usefulness. The final course project gave students a quasi real-life experience of combining merchandising skills with the…

A proposed model of factors influencing hydrogen fuel cell vehicle acceptance

Science.gov (United States)

Imanina, N. H. Noor; Kwe Lu, Tan; Fadhilah, A. R.

2016-03-01

Issues such as environmental problem and energy insecurity keep worsening as a result of energy use from household to huge industries including automotive industry. Recently, a new type of zero emission vehicle, hydrogen fuel cell vehicle (HFCV) has received attention. Although there are argues on the feasibility of hydrogen as the future fuel, there is another important issue, which is the acceptance of HFCV. The study of technology acceptance in the early stage is a vital key for a successful introduction and penetration of a technology. This paper proposes a model of factors influencing green vehicle acceptance, specifically HFCV. This model is built base on two technology acceptance theories and other empirical studies of vehicle acceptance. It aims to provide a base for finding the key factors influencing new sustainable energy fuelled vehicle, HFCV acceptance which is achieved by explaining intention to accept HFCV. Intention is influenced by attitude, subjective norm and perceived behavioural control from Theory of Planned Behaviour and personal norm from Norm Activation Theory. In the framework, attitude is influenced by perceptions of benefits and risks, and social trust. Perceived behavioural control is influenced by government interventions. Personal norm is influenced by outcome efficacy and problem awareness.

An Explanatory Study of Lean Practices in Job Shop Production/ Special Job Production/ Discrete Production/ Batch Shop Production Industries

OpenAIRE

Lavlesh Kumar Sharma; Ravindra Mohan Saxena

2014-01-01

In this paper, the study explores the benefits and advantages of Lean Practices or Lean Thinking in Job shop production/ Special job production/ Discrete production/ Batch shop production industries. The Lean Practices have been applied more compatible in Job shop production than in the continuous/ mass production because of several barriers and hurdles in the industrial context that influence the whole processes again and again, this happens due to the lack of knowledge about...

Towards understanding healthcare professionals' adoption and use of technologies in clinical practice: Using Qmethodology and models of technology acceptance.

Science.gov (United States)

Ladan, Muhammad Awwal; Wharrad, Heather; Windle, Richard

2018-03-09

Technologies have globally been recognised to improve productivity across different areas of practice including healthcare. This has been achieved due to the expansion of computers and other forms of information technologies. Despite this advancement, there has also been the growing challenge of the adoption and use of these technologies within practice and especially in healthcare. The evolution of information technologies and more specifically e-health within the healthcare practice has its own barriers and facilitators. This paper describes a pilot study to explore these factors that influence information and technology adoption and use by health professionals in the clinical area in Sub-Saharan Africa. We report on the use of Q-methodology and the models of technology acceptance used in combination for the first time. The methodology used for this study aims to explore the subjectivity of healthcare professionals and present their shared views (factors) on their adoption and use of e-health within clinical practice.

Acceptability, acceptance and decision making

International Nuclear Information System (INIS)

Ackerschott, H.

2002-01-01

There is a fundamental difference between the acceptability of a civilizatory or societal risk and the acceptability of the decision-making process that leads to a civilizatory or societal risk. The analysis of individual risk decisions - regarding who, executes when which indisputably hazardous, unhealthy or dangerous behaviour under which circumstances - is not helpful in finding solutions for the political decisions at hand in Germany concerning nuclear energy in particular or energy in general. The debt for implementation of any technology, in the sense of making the technology a success in terms of broad acceptance and general utilisation, lies with the particular industry involved. Regardless of the technology, innovation research identifies the implementation phase as most critical to the success of any innovation. In this sense, nuclear technology is at best still an innovation, because the implementation has not yet been completed. Fear and opposition to innovation are ubiquitous. Even the economy - which is often described as 'rational' - is full of this resistance. Innovation has an impact on the pivotal point between stability, the presupposition for the successful execution of decisions already taken and instability, which includes insecurity, but is also necessary for the success of further development. By definition, innovations are beyond our sphere of experience; not at the level of reliability and trust yet to come. Yet they are evaluated via the simplifying heuristics for making decisions proven not only to be necessary and useful, but also accurate in the familiar. The 'settlement of the debt of implementation', the accompanying communication, the decision-making procedures concerning the regulation of averse effects of the technology, but also the tailoring of the new technology or service itself must be directed to appropriate target groups. But the group often aimed at in the nuclear debate, the group, which largely determines political

The acceptability of computer applications to group practices.

Science.gov (United States)

Zimmerman, J; Gordon, R S; Tao, D K; Boxerman, S B

1978-01-01

Of the 72 identified group practices in a midwest urban environment, 39 were found to use computers. The practices had been influenced strongly by vendors in their selection of an automated system or service, and had usually spent less than a work-month analyzing their needs and reviewing alternate ways in which those needs could be met. Ninety-seven percent of the practices had some financial applications and 64% had administrative applications, but only 2.5% had medical applications. For half the practices at least 2 months elapsed from the time the automated applications were put into operation until they were considered to be integrated into the office routine. Advantages experienced by at least a third of the practices using computers were that the work was done faster, information was more readily available, and costs were reduced. The most common disadvantage was inflexibility. Most (89%) of the practices believed that automation was preferable to their previous manual system.

Industrial Provision of Practice Skills of Students Training Gastronomy Education (Case of Turkey)

Science.gov (United States)

Sarioglan, Mehmet

2013-01-01

Purpose of this study is to determine to what extent practice skills of students, training in gastronomy education, meet the expectations of food and beverage industry. In the study, 197 students training internship in 27 different firms of total 1540 students training in gastronomy education at higher education level in Turkey were reached by…

PFEM-based modeling of industrial granular flows

Science.gov (United States)

Cante, J.; Dávalos, C.; Hernández, J. A.; Oliver, J.; Jonsén, P.; Gustafsson, G.; Häggblad, H.-Å.

2014-05-01

The potential of numerical methods for the solution and optimization of industrial granular flows problems is widely accepted by the industries of this field, the challenge being to promote effectively their industrial practice. In this paper, we attempt to make an exploratory step in this regard by using a numerical model based on continuous mechanics and on the so-called Particle Finite Element Method (PFEM). This goal is achieved by focusing two specific industrial applications in mining industry and pellet manufacturing: silo discharge and calculation of power draw in tumbling mills. Both examples are representative of variations on the granular material mechanical response—varying from a stagnant configuration to a flow condition. The silo discharge is validated using the experimental data, collected on a full-scale flat bottomed cylindrical silo. The simulation is conducted with the aim of characterizing and understanding the correlation between flow patterns and pressures for concentric discharges. In the second example, the potential of PFEM as a numerical tool to track the positions of the particles inside the drum is analyzed. Pressures and wall pressures distribution are also studied. The power draw is also computed and validated against experiments in which the power is plotted in terms of the rotational speed of the drum.

Contact between doctors and the pharmaceutical industry, their perceptions, and the effects on prescribing habits.

Directory of Open Access Journals (Sweden)

Klaus Lieb

Full Text Available BACKGROUND: The prescribing behaviour of doctors is influenced by the pharmaceutical industry. This study investigated the extent to which contacts with pharmaceutical sales representatives (PSR and the perception of these contacts influence prescribing habits. METHOD: An online questionnaire regarding contact with PSRs and perceptions of this contact was sent to 1,388 doctors, 11.5% (n = 160 of whom completed the survey. Individual prescribing data over a year (number of prescriptions, expenditure, and daily doses for all on-patent branded, off-patent branded, and generic drugs were obtained from the Bavarian Association of Statutory Health Insurance Physicians. RESULTS: 84% of the doctors saw PSR at least once a week, and 14% daily. 69% accepted drug samples, 39% accepted stationery and 37% took part in sponsored continuing medical education (CME frequently. 5 physicians (3% accepted no benefits at all. 43% of doctors believed that they received adequate and accurate information from PSRs frequently or always and 42% believed that their prescribing habits were influenced by PSR visits occasionally or frequently. Practices that saw PSRs frequently had significantly higher total prescriptions and total daily doses (but not expenditure than practices that were less frequently visited. Doctors who believed that they received accurate information from PSRs showed higher expenditures on off-patent branded drugs (thus available as generics and a lower proportion of generics. The eschewal of sponsored CME was associated with a lower proportion of on patent-branded drug prescriptions, lower expenditure on off-patent branded drug prescriptions and a higher proportion of generics. Acceptance of office stationery was associated with higher daily doses. CONCLUSIONS: Avoidance of industry-sponsored CME is associated with more rational prescribing habits. Furthermore, gift acceptance and the belief that one is receiving adequate information from a PSR are

THE NEED TO IMPROVE PRACTICAL INFORMATION SYSTEM IN AGRICULTURE AND SPECIALIZED INDUSTRY

Directory of Open Access Journals (Sweden)

Romeo Cătălin CREŢU

2015-04-01

Full Text Available In Romania, the establishment of the market economy has required the elaboration and implementation of agricultural, alimentary and nutritional policies, based on scientific criteria, to ensure that the structure of Romanian agriculture would come close to that of the European Union agriculture. Agricultural policy needs to be coherent, flexible and directed towards the economic, social and environmental protection performance. Worldwide practice shows that empiric experience of economic agents does not suffice, but requires plenty of scientific knowledge. The hereby study undertakes to carry out a radiography of the production potential of agricultural operations in Romania and to demonstrate the need for improving practical information systems in agriculture and specialized industry.

Study on implementation of environmental management system in textile industry in Sudan

International Nuclear Information System (INIS)

Mohamed, H. A.

2010-11-01

This conducted from June to December, the main objective of this study is to formulate manual for textile industry in Sudan. The data used in this study is secondary data from references, books manuals, web sites and reports. This theoretical data can be executed practically. The quality of life on earth is linked inextricably to the overall quality of the environment. One of the major problems facing the industrial world today is the contamination of soil, ground water, sediments, surface water and air with hazardous toxic chemicals dumped by industries as waste. While regulatory step have been implemented in the recent past to reduce or eliminate the production and release of these chemicals into the environment, significant deterioration of the environment has already occurred so far. Conventional treatments have been used by some industries, but these can be both, expensive and inherently disruptive to the environment. Thus, economical and ecological management of industrial wastes has become a major concern these days. Integrating both economical and ecological methods in waste management by implementation environmental management system in textile sector, to enable textile industry to establish waste minimization programmes, reduction of pollution and reduced environmental impact. Effective waste minimization programmes an essential aspect of any EMS compliance with ISO 14000, reduction in the risk of pollution reliability, enhanced international acceptability, competitiveness and trade. environmental sustain ability and international and national acceptance to this are presented here, which can be used a good database by the organizations which can put into use these approaches for the efficient ecological management of their industrial wastes. The main objective of this to make Sudanese textile industry environmentally friend by establish manual for this. (Author)

Waste management '76 nuclear overview session industry viewpoint

International Nuclear Information System (INIS)

Carson, A.B.

1976-01-01

Lack of firm policy decisions and implementing regulations and program plans related to nuclear fuel cycle by-product wastes has become a major deterrent to progress in the constructive utilization of fission energy. In any event, the mismatch between waste management program accomplishments and perceived requirements has increased rather than decreased over recent years. Multi-agency programs and industry participation as well, at higher levels of effort than in the past, are required and are being initiated, but useful and lasting decisions still are some time off. From industry's viewpoint, all of the agency and industry programs related to waste management must be based on (a) a common view that no constructive activity is going to have zero personnel or environmental impact and that there generally will be a finite level of impact or risk to public health and safety that can be considered acceptable, and (b) consistent and rational consideration of what the levels of impact or risk are that can be considered acceptable in various circumstances. Regulatory requirements finally imposed must be related in some rational way to actual effects and their acceptable levels. Sound bases for timely decisions also require recognition of the fact that ''full and complete demonstration'' is not often really practical or necessary. Demonstration requirements for particular circumstances must be clearly defined and related to functional importance, extent of supporting technology and experience and other such rational factors. Finally, it is recognized that there are nontechnical issues the resolution of which are just as necessary to progress as the technical ones. However, such issues should not be allowed to lead to decisions or actions which are phenomenologically unsound or technically unsupported. After all, you might as well fall flat on your face as lean too far over backward

Habituating pain: Questioning pain and physical strain as inextricable conditions in the construction industry

Directory of Open Access Journals (Sweden)

Jeppe Z.N. Ajslev

2013-09-01

Full Text Available In this article, we investigate the relations between discursive practices within the Danish construction industry and the perceived pain, physical deterioration, and strain affecting the construction workers. Of central importance is the widely accepted hegemonic discourse on physical strain and pain as unavoidable conditions in construction work. Based on 32 semi-structured interviews performed in eight case studies within four different construction professions, workers’ descriptions of physical strain and its relation to the organizational and social context are analyzed through concepts of subject positioning in discursive practice and a focus on power relations. The analysis shows that workers and employers reproduce certain types of traditional working class masculinities and search for high-pace productive working rhythms, which in combination with economic incentives common within the industry reproduce physical strain and the habituation of pain as unquestioned conditions in construction work. The understanding of this mutual reinforcement of the necessity of physically straining, painful, high-paced construction work provides fruitful perspectives on the overrepresentation of musculoskeletal deterioration within construction work and also sheds light on some of the difficulties in addressing and changing occupational health and safety practices in the construction industry.

Acceptance, Tolerance, Participation

International Nuclear Information System (INIS)

1993-01-01

The problem of radioactive waste management from an ethical and societal viewpoint was treated in this seminar, which had participants from universities (social, theological, philosophical and science institutes), waste management industry, and regulatory and controlling authorities. After initial reviews on repository technology, policies and schedules, knowledge gaps, and ethical aspects on decision making under uncertainty, four subjects were treated in lectures and discussions: Democratic collective responsibility, Handling threats in democratic decision making, Waste management - a technological operation with a social dimension, Acceptance and legitimity. Lectures with comments and discussions are collected in this report

Evaluating the effectiveness of implementing quality management practices in the medical industry.

Science.gov (United States)

Yeh, T-M; Lai, H-P

2015-01-01

To discuss the effectiveness of 30 quality management practices (QMP) including Strategic Management, Balanced ScoreCard, Knowledge Management, and Total Quality Management in the medical industry. A V-shaped performance evaluation matrix is applied to identify the top ten practices that are important but not easy to use or implement. Quality Function Deployment (QFD) is then utilized to find key factors to improve the implementation of the top ten tools. The questionnaires were sent to the nursing staff and administrators in a hospital through e-mail and posts. A total of 250 copies were distributed and 217 copies were valid. The importance, easiness, and achievement (i.e., implementation level) of 30 quality management practices were used. Key factors for QMP implementation were sequenced in order of importance as top management involvement, inter-department communication and coordination, teamwork, hospital-wide participation, education and training, consultant professionalism, continuous internal auditing, computerized process, and incentive compensation. Top management can implement the V-shaped performance matrix to determine whether quality management practices need improvement and if so, utilize QFD to find the key factors for improvement.

Public acceptance: A Japanese view

International Nuclear Information System (INIS)

1972-01-01

A number of factors enter into a consideration of the public acceptance of nuclear power ? the public, nuclear power as an entity, and the interaction between the two. Interaction here implies the manner in which nuclear power is presented to the public ? what is the public need for nuclear power, and what public risk is entailed in having it? The problem of public acceptance, in this sense, is time-dependent. For the public is changeable, just as nuclear power is subject to technical progress and ' social' improvement. Japan is geographically a very small country with a very high density of population. Any industrial activity and any large-scale employment of modern technology is apt to have a much greater impact on the physical, social and biological environment of individual Japanese people than similar activities would have on those of other countries. Industrial pollutants such as sulphur dioxide from power plants, oxides of nitrogen from automobile engine exhausts, organic mercury from chemical industries and so on affect society to a high degree, considered in terms of their concentration either per capita or per square kilometre. In the case of nuclear power, therefore, people are more concerned with radiological effects than with thermal pollution.no matter how one looks at it, the experience of Hiroshima and Nagasaki has made the average member of the Japanese public, very sensitive to the problem of radiation safety. This is no longer a subject in which science or logic can persuade

Public acceptance: A Japanese view

Energy Technology Data Exchange (ETDEWEB)

NONE

1972-07-01

A number of factors enter into a consideration of the public acceptance of nuclear power ? the public, nuclear power as an entity, and the interaction between the two. Interaction here implies the manner in which nuclear power is presented to the public ? what is the public need for nuclear power, and what public risk is entailed in having it? The problem of public acceptance, in this sense, is time-dependent. For the public is changeable, just as nuclear power is subject to technical progress and ' social' improvement. Japan is geographically a very small country with a very high density of population. Any industrial activity and any large-scale employment of modern technology is apt to have a much greater impact on the physical, social and biological environment of individual Japanese people than similar activities would have on those of other countries. Industrial pollutants such as sulphur dioxide from power plants, oxides of nitrogen from automobile engine exhausts, organic mercury from chemical industries and so on affect society to a high degree, considered in terms of their concentration either per capita or per square kilometre. In the case of nuclear power, therefore, people are more concerned with radiological effects than with thermal pollution.no matter how one looks at it, the experience of Hiroshima and Nagasaki has made the average member of the Japanese public, very sensitive to the problem of radiation safety. This is no longer a subject in which science or logic can persuade.

Fifth Anniversary youth scientifically-practical conference Nuclear-industrial complex of Ural: problems and prospects. Theses of reports

International Nuclear Information System (INIS)

2009-01-01

Theses of reports of the Fifth Anniversary youth scientifically-practical conference Nuclear-industrial complex of Ural: problems and prospects (21-23 April 2009, Ozersk) are presented. The book contains abstracts of papers of fourth thematic sections: SNF reprocessing: science and industry; Radioecology and radiobiology; Advanced science-intensive technologies and materials; Education and training for NFC plants

Policy formulation of public acceptance

International Nuclear Information System (INIS)

Kasai, Akihiro

1978-01-01

Since 1970, the new policy formulation for public acceptance of the new consideration on the location of electric power generation has been set and applied. The planning and the enforcement being conducted by local public organizations for the local economic build-up with plant location and also the adjustement of the requirements for fishery are two main specific characters in this new policy. The background of this new public acceptance policy, the history and the actual problems about the compensation for the location of power generation plants are reviewed. One new proposal, being recommended by the Policy and Science Laboratory to MITI in 1977 is explained. This is based on the method of promoting the location of power generation plants by public participation placing the redevelopment of regional societies as its basis. The problems concerning the industrial structures in farm villages, fishing villages and the areas of commerce and industry should be systematized, and explained from the viewpoint of outside impact, the characteristics of local areas and the location problems in this new proposal. Finally, the location process and its effectiveness should be put in order. (Nakai, Y.)

Best Practices for Operating Government-Industry Partnerships in Cyber Security

Directory of Open Access Journals (Sweden)

Larry Clinton

2015-12-01

Full Text Available Since the publication of the first National Strategy to Secure Cyber Space in 2003 the US federal government has realized that due to the interconnected nature of the Internet, securing the system would require an industry-government partnership. However, defining exactly what that new partnership would look like and how it would operate has been unclear. The ramifications of this ambiguous strategy have been noted elsewhere including the 2011 JSS article “A Relationship on the Brink” which described the dysfunctional state of public private partnerships with respect to cyber security. Subsequently, a joint industry-government study of partnership programs has generated a consensus list of “best practices” for operating such programs successfully. Moreover, subsequent use of these principles seems to confirm their ability to enhance the partnership and hopefully helps ameliorate, to some degree, the growing cyber threat. This article provides a brief history of the evolution of public-private partnerships in cyber security, the joint study to assess them and the 12 best practices generated by that analysis.

A practical model-based statistical approach for generating functional test cases: application in the automotive industry

OpenAIRE

Awédikian , Roy; Yannou , Bernard

2012-01-01

International audience; With the growing complexity of industrial software applications, industrials are looking for efficient and practical methods to validate the software. This paper develops a model-based statistical testing approach that automatically generates online and offline test cases for embedded software. It discusses an integrated framework that combines solutions for three major software testing research questions: (i) how to select test inputs; (ii) how to predict the expected...

Implementation of Responsible Research and Innovation (RRI Practices in Industry: Providing the Right Incentives

Directory of Open Access Journals (Sweden)

Agata Gurzawska

2017-09-01

Full Text Available Abstract: Responsible Research and Innovation (RRI is a term used by policy-makers and academics to refer to research and innovation that is ethically acceptable and socially desirable. Despite the fact that the vast majority of research and innovation (R&I is funded and produced by industry, companies tend to have no awareness or recognition of this concept. This is unfortunate, as the RRI paradigm could be mutually beneficial for both business and society: it could help businesses realise competitive opportunities while also leading to positive economic, societal and environmental impacts. This paper investigates how industry can be incentivised to engage in research and innovation following the approach of RRI. We propose a matrix of incentives for stimulating the adoption of RRI. We categorise incentives according to three dichotomies: external and internal, instrumental and non-instrumental, direct and indirect. The incentives are formalised in a causal loop diagram, which can be used to demonstrate the sound character of investing in RRI from a business perspective. We discuss examples of incentives, including corporate reputation and critical consumerism, certification, employee engagement, and governance. Lastly, to ensure effective implementation of RRI, we outline factors for the realisation of successful incentives for RRI in industry.

Self-reported hand hygiene practices, and feasibility and acceptability of alcohol-based hand rubs among village healthcare workers in Inner Mongolia, China.

Science.gov (United States)

Li, Y; Wang, Y; Yan, D; Rao, C Y

2015-08-01

Good hand hygiene is critical to reduce the risk of healthcare-associated infections. Limited data are available on hand hygiene practices from rural healthcare systems in China. To assess the feasibility and acceptability of sanitizing hands with alcohol-based hand rubs (ABHRs) among Chinese village healthcare workers, and to assess their hand hygiene practice. Five hundred bottles of ABHR were given to village healthcare workers in Inner Mongolia, China. Standardized questionnaires collected information on their work load, availability, and usage of hand hygiene facilities, and knowledge, attitudes, and practices of hand hygiene. In all, 369 (64.2%) participants completed the questionnaire. Although 84.5% of the ABHR recipients believed that receiving the ABHR improved their hand hygiene practice, 78.8% of recipients would pay no more than US$1.5 out of their own pocket (actual cost US$4). The majority (77.2%) who provided medical care at patients' homes never carried hand rubs with them outside their clinics. In general, self-reported hand hygiene compliance was suboptimal, and the lowest compliance was 'before touching a patient'. Reported top three complaints with using ABHR were skin irritation, splashing, and unpleasant residual. Village doctors with less experience practised less hand hygiene. The overall acceptance of ABHR among the village healthcare workers is high as long as it is provided to them for free/low cost, but their overall hand hygiene practice is suboptimal. Hand hygiene education and training is needed in settings outside of traditional healthcare facilities. Published by Elsevier Ltd.

The Exploration and Practice of Gradually Industrialization Model in Software Engineering Education: A Factual Instance of the Excellent Engineer Plan of China

Science.gov (United States)

Liu, Shu; Ma, Peijun; Li, Dong

2012-01-01

The current education model and practices in the Higher education sector in China have been successful in educating students for academic excellence, for producing industry-linked and practice-oriented graduates, who could quickly fit into the industrial working environment, has been a problem. There is a big gap between the theoretical knowledge…

Standard practice for determining relative image quality response of industrial radiographic imaging systems

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This standard provides a practice whereby industrial radiographic imaging systems may be comparatively assessed using the concept of relative image quality response (RIQR). The RIQR method presented within this practice is based upon the use of equivalent penetrameter sensitivity (EPS) described within Practice E 1025 and subsection 5.2 of this practice. Figure 1 illustrates a relative image quality indicator (RIQI) that has four different steel plaque thicknesses (.015, .010, .008, and .005 in.) sequentially positioned (from top to bottom) on a ¾-in. thick steel plate. The four plaques contain a total of 14 different arrays of penetrameter-type hole sizes designed to render varied conditions of threshold visibility ranging from 1.92 % EPS (at the top) to .94 % EPS (at the bottom) when exposed to nominal 200 keV X-ray radiation. Each “EPS” array consists of 30 identical holes; thus, providing the user with a quantity of threshold sensitivity levels suitable for relative image qualitative response com...

Pyrochemistry: from flowsheet to industrial facility

International Nuclear Information System (INIS)

Donaldson, N.; Thied, R.; Lamorlette, G.; Greneche, D.

2001-01-01

Challenges to any future commercial deployment of pyro-chemistry will be significant. The implications of industrial use must be well understood in technical, economic and social terms to gain commercial and regulatory acceptance. The broad base of knowledge necessary to support general commercial use of pyro-chemistry in the nuclear field is considered. Pyro-chemistry development is discussed in the context of a commercial application-based approach and issues to be addressed are outlined. A stepwise evolutionary development of pyro-chemical processing is anticipated which might allow industrialization in the absence of acceptance of evolutionary development at industrial scale which benefited Purex development. (author)

The Effect of Industrial Work Performance Practice and Performance Automotive Electrical Prakti entrepreneurial n Against Interests Automotive Mechanics Class XII Smk Diponegoro Depok Sleman

OpenAIRE

Arif Mustofa; Pairun Roniwijaya

2013-01-01

The purpose of this study was to determine (1) the influence of the industrial working practices achievement entrepreneurial interests, (2) the effect of automotive electrical practice achievement against entrepreneurial interests, and (3) influence of achievement and accomplishment industry work practices automotive electrical practices to entrepreneurial interest Automotive Mechanics XII class students of SMK Diponegoro Depok Sleman school year 2012/2013.  The results showed that the test r...

Solid waste management practices in wet coffee processing industries of Gidabo watershed, Ethiopia.

Science.gov (United States)

Ulsido, Mihret D; Li, Meng

2016-07-01

The financial and social contributions of coffee processing industries within most coffee export-based national economies like Ethiopia are generally high. The type and amount of waste produced and the waste management options adopted by these industries can have negative effects on the environment. This study investigated the solid waste management options adopted in wet coffee processing industries in the Gidabo watershed of Ethiopia. A field observation and assessment were made to identify whether the operational characteristics of the industries have any effect on the waste management options that were practiced. The investigation was conducted on 125 wet coffee processing industries about their solid waste handling techniques. Focus group discussion, structured questionnaires, key informant interview and transect walks are some of the tools employed during the investigation. Two major types of wastes, namely hull-bean-pulp blended solid waste and wastewater rich in dissolved and suspended solids were generated in the industries. Wet mills, on average, released 20.69% green coffee bean, 18.58% water and 60.74% pulp by weight. Even though these wastes are rich in organic matter and recyclables; the most favoured solid waste management options in the watershed were disposal (50.4%) and industrial or household composting (49.6%). Laxity and impulsive decision are the driving motives behind solid waste management in Gidabo watershed. Therefore, to reduce possible contamination of the environment, wastes generated during the processing of red coffee cherries, such as coffee wet mill solid wastes, should be handled properly and effectively through maximisation of their benefits with minimised losses. © The Author(s) 2016.

Quality of the Critical Incident Technique in practice: Interrater reliability and users' acceptance under real conditions

Directory of Open Access Journals (Sweden)

ANNA KOCH

2009-03-01

Full Text Available The Critical Incident Technique (CIT is a widely used task analysis method in personnel psychology. While studies on psychometric properties of the CIT so far primarily took into account relevance ratings of task-lists or attributes, and hence, only a smaller or adapted part of the CIT, little is known about the psychometric properties of the complete CIT in its most meaningful and fruitful way. Therefore, the aim of the present study was to assess interrater reliability and the participants’ view of the CIT under real conditions and especially to provide data for the key step of the CIT: the classification of behavior descriptions into requirements. Additionally, the cost-benefit-ratio and practicability were rated from the participants’ views as an important indicator for the acceptance of the task analysis approach in practice. Instructors of German Institutions for Statutory Accidents Insurance and Prevention as well as their supervisors took part in a job analysis with the CIT. Moderate interrater reliability for the relevance rating was found while the classification step yielded unexpectedly low coefficients for interrater reliability. The cost-benefit-ratio and practicability of the complete CIT were rated very positive. The results are discussed in relation to determinants that facilitate or impede the application of task analysis procedures.

Impacts of glutathione Maillard reaction products on sensory characteristics and consumer acceptability of beef soup.

Science.gov (United States)

Hong, J H; Jung, D W; Kim, Y S; Lee, S M; Kim, K O

2010-10-01

The sensory characteristics and consumer acceptability of beef soup with added glutathione Maillard reaction products (GMRPs) were investigated to examine the effects of the GMRPs on beef-soup flavor compared to soups made with glutathione (GSH) and monosodium glutamate (MSG), a control (CON), or a control soup made with 150% beef content (CON150). The sensory characteristics of the beef soups were examined by descriptive analysis. The overall acceptabilities of the beef soups were rated by consumers. Principal component analysis was performed on descriptive data as explanatory variables with overall acceptability as a supplementary variable to observe the relationships between the descriptive data and consumer acceptability, as well as the relationships between the beef-soup samples and their sensory attributes. The samples containing GMRPs had "beef flavor" that was stronger than the CON and MSG samples, and comparable to that of the GSH sample and CON150. The GMRP samples had stronger "green onion flavor,"garlic flavor," and "boiled egg white flavor" than the other samples. The beef soup containing MSG was preferred to CON, CON150, and GSH. The samples with GMRPs were least favored because of their pronounced metallic and astringent notes. The results of this study imply the feasibility of GMRPs as a flavor enhancer since the soups containing these compounds showed more complex flavor profiles than GSH. However, future studies are required to optimize the MR conditions that produce GMRPs without undesirable characteristics. Practical Application: This study examined the practicability of the Maillard reaction products between glutathione (GSH) and glucose (GP) or fructose (FP) as a flavor enhancer by investigating the sensory characteristics and consumer acceptability evoked by them in a beef-soup system. This study helps flavor and food industry to develop a new flavor enhancer by providing practical information, such as beef flavor-enhancing effect of FP and

Enhancement of the Public Acceptance of Nuclear Energy

International Nuclear Information System (INIS)

Song, K. C.; Jeong, S. M.; Noh, T. W.

2010-02-01

To enhance the public acceptance of nuclear energy in Korea we translate the 'The Power to Save the World - The Truth about Nuclear Energy' written by the American novelist Gwyneth Cravens into Korean. 'Power to Save the World' is an eloquent, convincing argument for nuclear power as a safe energy source and an essential deterrent to global warming. To promote national power by keeping nuclear industry healthy, we need to supply the variety of material which enhances the public acceptance of nuclear energy

The effect of quality management practices on operational and business results in the petroleum industry in Iran

Science.gov (United States)

Mellat Parast, Mahour

The trend toward globalization has challenged management thinking, organizational practices, and the ways companies interact with their customers and suppliers as well as with other segments of society. One such practice, Total Quality Management (TQM), has emerged as a management paradigm for enhancing organizational performance and profitability, to the extent that it has been regarded as "the second industrial revolution" (Kanji, 1990). Despite extensive research in quality management, little empirical research has been done on this in an international context, especially in the Middle East. This study attempts to investigate: (1) the relationship among quality management constructs based on the Malcolm Baldrige National Quality Award; and (2) the effect of quality management practices on operational and business results in the petroleum industry. A validated and reliable survey instrument was used for the study to collect data from 31 project managers/consultants in the petroleum industry in Iran. The results of the correlation analysis show that top management support is the major driver of quality management, which significantly correlates with other quality management practices. It was also found that customer orientation is not significantly correlated with external quality results (profitability). A regression analysis indicated top management support, employee training, and employee involvement as the three statistically significant variables in explaining the variability in internal quality results. Furthermore, it was found that internal quality results was statistically significant in explaining the variability of external quality results.

THE IMPLEMENTATION OF E-MARKETING IN THE HOTEL INDUSTRY: THE CASE OF ISTRIA COUNTY

OpenAIRE

Lončarić, Dina; Radetić, Nensi

2015-01-01

Information and communication technology (ICT) has penetrated many spheres of life and work. Recognizing the potential of this new technology, marketers have readily accepted ICT and turned the marketing concept into e-marketing. The purpose of this paper is to examine the level of implementation of e-marketing practice in the hotel industry. The paper is based on empirical research conducted in Istria County, the most developed tourist county in Croatia. The research was conducte...

Managing the IE (Industrial Engineering Mindset: A quantitative investigation of Toyota’s practical thinking shared among employees

Directory of Open Access Journals (Sweden)

Phillip Marksberry

2011-12-01

Full Text Available Purpose: The goal of this work was to investigate the managerial practices of today to understand if Toyota is sheltering themselves from these newer practices or embracing them like most believe.Design/methodology/approach: This work utilizes a new form of data mining named Latent Semantic Analysis (LSA to analyze an organizations ideal management practices.Findings: This work shows quantitatively that TPS favors earlier versions of industrial engineering compared to the optimization techniques available today.Originality/value: The use of data mining to analyze organizational management practices.

Nuclear Energy and Public Acceptance

International Nuclear Information System (INIS)

Daifuku, K.

2002-01-01

The continued use of nuclear power in the European Union and elsewhere requires an adequate level of public and political acceptance. A lack of acceptance is often mistakenly cited as a reason for the slowdown in nuclear power plant construction in Western Europe and as a justification for abandoning nuclear power. In fact, the reasons for the slowdown have more to do with the following two factors: Plentiful supplies of low-priced natural gas, making gas-fired power plants a more attractive investment choice; more than adequate supplies of electricity which have curbed the need for the construction of new plant of any kind. In general, moves towards a withdrawal from nuclear in certain Community countries have been due to party political pressures and have not been a response to public opposition to nuclear. In addition, opinion polls do not show widespread public opposition to the use of nuclear power. Figures consistently indicate that the use of nuclear power does not come high on the list of most people's main worries. Their main concerns focus on other issues such as crime and financial problems. In the main, electricity is taken for granted in the industrialised world. Electric power only becomes an issue when there is a threat of shortages. So if public acceptance is not the main obstacle, what is? Political acceptance is an integral part of the process in which nuclear becomes acceptable or not. The relationship between public and political acceptance and the role of the industry in this context, on how to foster a better trialogue, will be examined. (author)

Pollution minimisation practices in the Australian mining and mineral processing industries

Energy Technology Data Exchange (ETDEWEB)

Catherine Driussi; Janis Jansz [Edith Cowan University, Joondalup, WA (Australia)

2006-07-01

Research was conducted to identify some of the current pollution minimisation practices adopted in Australia's mining and mineral processing industries. Initially, 84 mining and mineral processing companies were approached for inclusion in the study, with request only made for information that was available to the company stakeholders and the wider general community. Among the responses received, BHP Billiton, BlueScope Steel, Newmont Australia Limited and AngloGold Australia provided the information requested and/or a substantial quantity of information through reports on their company website. Analysis of the data collected for these companies indicated that improvements were made, and that policies had been implemented over the previous few years. The pollution minimisation and policy practices adopted at the operations of these companies include environmental management systems, advanced pollution control technologies, environmental awareness training for employees, and requirement - from company stakeholders - for increased accountability of environmental impacts.

Evaluation of the current practices of noise-induced hearing loss (NIHL) awareness training in the South African mining industry

CSIR Research Space (South Africa)

Edwards, AL

2015-01-01

Full Text Available This study aimed to evaluate the current practices in relation to best practice criteria and make recommendations for improvements to noise-induced hearing loss (NIHL) awareness training in the South African mining industry. A survey tool based...

Continuous improvement in the Netherlands: current practices and experiences in Dutch manufacturing industry (awarded with ANBAR Citation of excellence)

NARCIS (Netherlands)

Gieskes, J.F.B.; Baudet, F.C.M.; Baudet, Frank; Schuring, R.W.; Boer, Harm

1997-01-01

In order to get insight into the current continuous-improvement practices in European industry, EuroCINet carried out a survey in its member countries. In this article, continuous-improvement activities in a sample of 135 Dutch industrial companies are described. The results show that CI is a

Differentiated influences of benefit and risk perceptions on nuclear power acceptance according to acceptance levels. Evidence from Korea

International Nuclear Information System (INIS)

Roh, Seungkook; Lee Jinwon

2017-01-01

The perceived benefit and risk of nuclear power generation have received considerable attention as determinants of the public's nuclear power acceptance. However, the contingency of the relative importance of these benefit and risk has been less explored. Using Korea as an example, this study explores the possibility that the relative importance of perceived benefit and risk on nuclear power acceptance depends on acceptance levels. Our results from latent class analysis and multinomial probit show that, in determining whether an individual shows a moderate level of nuclear power acceptance rather than a low level, perceived risk plays a dominant role compared to perceived benefit; however, regarding whether he/she shows a high level of nuclear power acceptance rather than a moderate level, this relative importance is reversed. These results carry practical implications for risk governance of nuclear power, particularly with regard to communication with the public. (author)

19 CFR 210.58 - Provisional acceptance of the motion.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Provisional acceptance of the motion. 210.58 Section 210.58 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE ADJUDICATION AND ENFORCEMENT Temporary Relief § 210.58 Provisional acceptance of...

Reduce, reuse, recycle: Acceptance of CO_2-utilization for plastic products

International Nuclear Information System (INIS)

Heek, Julia van; Arning, Katrin; Ziefle, Martina

2017-01-01

Global warming is a central threat for today's society caused by greenhouse gas emissions, mostly carbon dioxide emissions. Carbon dioxide capture and utilization (CCU) is a promising approach to reduce emissions and the use of expensive and limited fossil resources. Applying CCU, carbon dioxide (CO_2) can be incorporated as raw material during the manufacture of plastic products. While most of the studies address technical feasibilities, hardly any systematic research on public perception and acceptance of those specific products exists so far. This study empirically investigates the acceptance of CCU plastic products (mattress as example). First, interviews with experts and lay people revealed critical acceptance factors (CO_2 proportion, saving of fossil resources, disposal conditions, perceived health complaints). Their relative importance was detailed in two consecutive conjoint studies. Study 1 revealed disposal conditions and saving of fossil resources as essential for product selection, while the products’ CO_2 proportion was less important. In study 2, potential health complaints were integrated as well as individual levels of domain knowledge and risk perception, which significantly affected acceptance of CCU products. Recommendations concerning communication strategies for policy and industry were derived. - Highlights: • Study provides insights into the acceptance of specific CCU products. • Disposal conditions and savings of fossil resource are main drivers of acceptance. • Concerns about potential health effects act as major barrier especially for laypeople. • Perceived knowledge and risk perception affect CCU product acceptance. • Communication strategy recommendations for policy and industry are derived.

Perceptions of industrial and nuclear risks. Stakes, negotiations and social development of levels of risk acceptance; Perceptions des risques industriels et nucleaires: enjeux, negociations et construction sociale des seuils d'acception des risques

Energy Technology Data Exchange (ETDEWEB)

Bernier, S.Ch

2007-11-15

In this thesis we will question the perceptions of industrial risks in the occidental world at the beginning of the 21. century. For this purpose we will try to understand how concepts such as sustainable development, precautionary principle, liability, or even zero-risk bias have progressively developed around a thought model based on the scientific rationality. This model is now undermined by its incapacity to fully address the issues it raises and completely avoid the potential risks. However, despite consistent weaknesses, it remains a reference value moulded by past accidents which have led to the making of laws aiming mainly at defining liability and protecting those who are held liable. Thus, public information becomes a requirement for democracy and the protection of this thought model. In this context, the protagonists at stake are security-conscious, economical and political lobbies that constantly redefine the limits of risk acceptance. We come to the realization that our lifestyle and value system remain unchallenged even though undergoing a crisis. The specificity of this research lies into the importance we give to the local approach, dealing with registered Seveso sites and nuclear plants located in Indre et Loire. We have polled five categories of respondents through interviews or questionnaires in order to understand their opinion regarding situations involving technological risks. The result of this survey helps us understand and set the levels of risk acceptance that they define with regard to the industrial risks and show the complexity of a situation involving political stakes, environmental pressures, a profit-driven economy and security constraints, in a vague and complex context. This work gives us a contrasted picture of today's perceptions of risks. (author)

Theory and practice: Essential balance in the education of staff in the hotel industry

Directory of Open Access Journals (Sweden)

Đurašević Silvana

2016-01-01

Full Text Available The development of tourism as the most promising sector in Montenegro requires a higher proportion of high-quality, highly educated staff this is particularly true if we bear in mind that tourism, and predominantly the hos­pitality industry, is a generator of new jobs. For the sustainable development of human resources in the hotel industry, it is necessary to harmonize the higher education system with the needs of the hotel sector. For the purpose of this paper, interviews were conducted and the obtained results analyzed using statistical and descriptive methods. We analyzed the attitudes of two key groups: managers in the hotel industry, as those considered responsible for the implementation of the services and students as future employees. The objective was to examine whether the provision of quality service in hospitality requires the introduction of practical knowledge and skills as a compulsory part of education in tourism and hotel industry studies. The results obtained may serve as a basis for the establishment of modern study programmes in higher education in the field of tourism and hospitality.

Electronic medical record in central polyclinic of isfahan oil industry: a case study based on technology acceptance model.

Science.gov (United States)

Tavakoli, Nahid; Jahanbakhsh, Maryam; Shahin, Arash; Mokhtari, Habibollah; Rafiei, Maryam

2013-03-01

Today, health information technologies are base of health services and Electronic Medical Record is one of them. The purpose of this paper is to investigate the Technology Acceptance Model (TAM) on EMR at Central Polyclinic Oil Industry that is a pioneer in implementation of EMR in Isfahan. This study was an applied and analytical survey that it was done at the Central Polyclinic Oil Industry. Because statistical population were limited, sampling bas been done by conducting the census and the sample was according to the population. The data was collected by a researcher-made questionnaire that it was validated by experts and its reliability was confirmed by test retest. The questionnaire was developed in 5 scopes including external factors (data quality and user interface), perceived usefulness, perceived ease of usefulness, attitude toward using, and behavioral intention to use. The Results analyzed by SPSS. There was a significant relationship between data quality with PU(r=/295, p/005). The survey of the scopes in the polyclinic showed that there is relationship among user interface, perceived usefulness, perceived ease of usefulness, attitude toward using, and behavioral intention to use, but data quality has no relationship with attitude. It seems the system designers didn't consider to data quality characteristics. It is proposed that they consult with health information management professionals for improvement the existing system.

PENGARUH PRAKTIK KERJA INDUSTRI DAN LINGKUNGAN KELUARGA TERHADAP MOTIVASI BERWIRAUSAHA SISWA KELAS XII PEMASARAN SMK NEGERI 2 SEMARANG

Directory of Open Access Journals (Sweden)

Sodikin

2014-06-01

thitung of 4.847 to 0.000 and the significance of family environment obtained thitung of 3.182 with a significance of 0.002 means that H0 is rejected and Ha 1, Ha 2, Ha 3 is accepted. The magnitude of the effect of partially to variable industry work practices for 19.62% and 9.55% of the family environment, simultaneously by 44%.

Theory and practice of quality and reliability engineering in Asia industry

CERN Document Server

Goh, Thong

2017-01-01

This book discusses the application of quality and reliability engineering in Asian industries, and offers information for multinational companies (MNC) looking to transfer some of their operation and manufacturing capabilities to Asia and at the same time maintain high levels of reliability and quality. It is also provides small and medium enterprises (SME) in Asia with insights into producing high-quality and reliable products. It mainly comprises peer-reviewed papers that were presented at the Asian Network for Quality (ANQ) Congress 2014 held in Singapore (August, 2014), which provides a platform for companies, especially those within Asia where rapid changes and growth in manufacturing are taking place, to present their quality and reliability practices. The book presents practical demonstrations of how quality and reliability methodologies can be modified for the unique Asian market, and as such is a valuable resource for students, academics, professionals and practitioners in the field of quality and r...

Assessment of good manufacturing practice for small scale food industry in Malang region, East Java, Indonesia

Science.gov (United States)

Purwantiningrum, I.; Widyhastuty, W.; Christian, J.; Sari, N.

2018-03-01

Enhancing food safety in developing countries, such as Indonesia, poses more challenges, especially those of the small- and medium-scale. Various food safety systems are available and readily implemented in the food industry. However, to ensure the effectiveness of such systems, pre-requisite programs should be applied prior to the implementation of food safety system. One of the most acknowledged pre-requisite program is Good Manufacturing Practices (GMP). The aim of this study is to assess the GMP compliance of some small-scale food companies in East Java. Three types of traditional food product were selected, include tempe chips, palm sugar, and instant herbal drink. A survey involving three companies for each type of traditional food was conducted. Data was obtained through observation and assessment based on tabulated criteria in GMP criteria. In essential, the result revealed the compliment level of the food companies being surveyed. There was different level of compliment between each type of the food industry, where the palm sugar industry had the lowest level of compliment compared to the other two. This difference is due to the food safety awareness, social and cultural influences, and also knowledge on food safety and hygiene practice.

Recommended industry best management practices for the prevention of Phytophthora ramorum introduction in nursery operations

Science.gov (United States)

Karen Suslow

2008-01-01

The following industry recommended best management practices (BMPs), designed for growers and/or interstate shippers of host and associated host plants of Phytophthora ramorum, consists of biosecurity guidelines created by and for nursery growers in order to reduce the risks associated with P. ramorum. The control of P....

Survey of methods for improving operator acceptance of computerized aids

International Nuclear Information System (INIS)

Frey, P.R.; Kisner, R.A.

1982-04-01

The success of current attempts to improve the operational performance and safety of nuclear power plants by installing computerized operational aids in the control rooms is dependent, in part, on the operator's attitude toward the aid. Utility experience with process computer systems indicates that problems may already exist with operator acceptance of computerized aids. The growth of the role that computers have in nuclear power plants makes user acceptance of computer technology an important issue for the nuclear industry. The purpose of this report is to draw from the literature factors related to user acceptance of computerized equipment that may also be applicable to the acceptance of computerized aids used in the nuclear power plant control room

Survey of methods for improving operator acceptance of computerized aids

Energy Technology Data Exchange (ETDEWEB)

Frey, P. R.; Kisner, R. A.

1982-04-01

The success of current attempts to improve the operational performance and safety of nuclear power plants by installing computerized operational aids in the control rooms is dependent, in part, on the operator's attitude toward the aid. Utility experience with process computer systems indicates that problems may already exist with operator acceptance of computerized aids. The growth of the role that computers have in nuclear power plants makes user acceptance of computer technology an important issue for the nuclear industry. The purpose of this report is to draw from the literature factors related to user acceptance of computerized equipment that may also be applicable to the acceptance of computerized aids used in the nuclear power plant control room.

Shoulder dystocia--malpractice or acceptable risk?

Science.gov (United States)

Skolbekken, J A

2000-09-01

In 1988 a new patient insurance system was introduced in Norway. It was initially described as an 'objectified' system, similar to one based on the no-fault principle. Early doubts were raised about the system's status, as it contains rules stating that compensation will not be given if the medical intervention is adequate and the involved risk is acceptable. This study was undertaken to examine the practice of these rules. An archival study was performed on the 41 shoulder dystocia cases that had been closed in the decade from 1988-1997. These cases were selected as shoulder dystocia was found to be the obstetrical event most often leading to a decision on acceptable risk. The most common injury in these cases was Erb's palsy, but fatalities and brain injuries were also observed. Compensation was given in nine cases, whereas it was denied due to an acceptable medical risk in the remaining cases. Indications of inconsistency among the reached decisions were found, and judged to be a result of differences of opinion between expert witnesses on the adequacy of the obstetrical practice. Doubts are raised as to whether similar decisions are reached in similar cases. Shoulder dystocia may be an acceptable risk in the sense that it is hard to predict and prevent. Whether the consequences of such a risk should be compensated, remains a political and economical issue. Present thinking leads to decisions that create a divide between the lucky unlucky and the plainly unlucky.

Patient Engagement Practices in Clinical Research among Patient Groups, Industry, and Academia in the United States: A Survey.

Directory of Open Access Journals (Sweden)

Sophia K Smith

Full Text Available Patient-centered clinical trial design and execution is becoming increasingly important. No best practice guidelines exist despite a key stakeholder declaration to create more effective engagement models. This study aims to gain a better understanding of attitudes and practices for engaging patient groups so that actionable recommendations may be developed.Individuals from industry, academic institutions, and patient groups were identified through Clinical Trials Transformation Initiative and Drug Information Association rosters and mailing lists. Objectives, practices, and perceived barriers related to engaging patient groups in the planning, conduct, and interpretation of clinical trials were reported in an online survey. Descriptive and inferential statistical analysis of survey data followed a literature review to inform survey questions.Survey respondents (n = 179 valued the importance of involving patient groups in research; however, patient group respondents valued their contributions to research protocol development, funding acquisition, and interpretation of study results more highly than those contributions were valued by industry and academic respondents (all p < .001. Patient group respondents placed higher value in open communications, clear expectations, and detailed contract execution than did non-patient group respondents (all p < .05. Industry and academic respondents more often cited internal bureaucratic processes and reluctance to share information as engagement barriers than did patient group respondents (all p < .01. Patient groups reported that a lack of transparency and understanding of the benefits of collaboration on the part of industry and academia were greater barriers than did non-patient group respondents (all p< .01.Despite reported similarities among approaches to engagement by the three stakeholder groups, key differences exist in perceived barriers and benefits to partnering with patient groups among the

Acceptance test procedure for the 105-KW isolation barrier leak rate

International Nuclear Information System (INIS)

McCracken, K.J.

1995-01-01

This acceptance test procedure shall be used to: First establish a basin water loss rate prior to installation of the two isolation barriers between the main basin and the discharge chute in K-Basin West. Second, perform an acceptance test to verify an acceptable leakage rate through the barrier seals. This Acceptance Test Procedure (ATP) has been prepared in accordance with CM-6-1 EP 4.2, Standard Engineering Practices

Standardizing the practice of human reliability analysis

International Nuclear Information System (INIS)

Hallbert, B.P.

1993-01-01

The practice of human reliability analysis (HRA) within the nuclear industry varies greatly in terms of posited mechanisms that shape human performance, methods of characterizing and analytically modeling human behavior, and the techniques that are employed to estimate the frequency with which human error occurs. This variation has been a source of contention among HRA practitioners regarding the validity of results obtained from different HRA methods. It has also resulted in attempts to develop standard methods and procedures for conducting HRAs. For many of the same reasons, the practice of HRA has not been standardized or has been standardized only to the extent that individual analysts have developed heuristics and consistent approaches in their practice of HRA. From the standpoint of consumers and regulators, this has resulted in a lack of clear acceptance criteria for the assumptions, modeling, and quantification of human errors in probabilistic risk assessments

Knowledge, attitude and practices of Egyptian industrial and tourist workers towards HIV/AIDS.

Science.gov (United States)

El-Sayyed, N; Kabbash, I A; El-Gueniedy, M

2008-01-01

This study explored knowledge, attitudes and practices towards HIV/AIDS infection among 1256 Egyptian industrial and tourism workers aged 16-40 years. Compared with industrial workers, tourism workers had a significantly better perception of the magnitude of the HIV/AIDS problem worldwide as well as in Egypt and of the likelihood of the problem worsening. Knowledge of tourism workers was also significantly better about causative agent of AIDS and methods of transmission. Both groups had negative attitudes towards patients living with HIV/AIDS concerning their right to confidentiality and to work. Both groups had a positive attitude towards behaviour change for protection from HIV/AIDS, principally via avoidance of extramarital sexual relations and adherence to religious beliefs. Use of condoms as a way to avoid HIV/AIDS was reported by only 0.4% of workers.

A Remote PLC Laboratory (RLab) for Distance Practical Work of Industrial Automation

Science.gov (United States)

Haritman, E.; Somantri, Y.; Wahyudin, D.; Mulyana, E.

2018-02-01

A laboratory is an essential equipment for engineering students to do a useful practical work. Therefore, universities should provide an adequate facility for practical work. On the other hand, industrial automation laboratory would offer students beneficial experience by using various educational PLC kits. This paper describes the development of Web-based Programmable Logic Controller (PLC) remote laboratory called RLab. It provides an environment for learners to study PLC application to control the level of the non-interacting tank. The RLab architecture is based on a Moodle and Remote Desktop, which also manages the booking system of the schedule of practical work in the laboratory. The RLab equipped by USB cameras providing a real-time view of PLC environment. To provide a secured system, the RLab combines Moodle and Remote Desktop application for the authentication system and management of remote users. Moodle will send PartnerID and password to connect to TeamViewer. It has been examined that the laboratory requirement, time and flexibility restrictions constitute a significant obstacle facing traditional students desiring to finish the course. A remote access laboratory can be eliminating time and flexibility restrictions. The preliminary study of RLab usability proved that such system is adequate to give the learners a distance practical work environment.

Cloud manufacturing: from concept to practice

Science.gov (United States)

Ren, Lei; Zhang, Lin; Tao, Fei; Zhao, Chun; Chai, Xudong; Zhao, Xinpei

2015-02-01

The concept of cloud manufacturing is emerging as a new promising manufacturing paradigm, as well as a business model, which is reshaping the service-oriented, highly collaborative, knowledge-intensive and eco-efficient manufacturing industry. However, the basic concepts about cloud manufacturing are still in discussion. Both academia and industry will need to have a commonly accepted definition of cloud manufacturing, as well as further guidance and recommendations on how to develop and implement cloud manufacturing. In this paper, we review some of the research work and clarify some fundamental terminologies in this field. Further, we developed a cloud manufacturing systems which may serve as an application example. From a systematic and practical perspective, the key requirements of cloud manufacturing platforms are investigated, and then we propose a cloud manufacturing platform prototype, MfgCloud. Finally, a public cloud manufacturing system for small- and medium-sized enterprises (SME) is presented. This paper presents a new perspective for cloud manufacturing, as well as a cloud-to-ground solution. The integrated solution proposed in this paper, including the terminology, MfgCloud, and applications, can push forward this new paradigm from concept to practice.

Text recycling: acceptable or misconduct?

Science.gov (United States)

Harriman, Stephanie; Patel, Jigisha

2014-08-16

Text recycling, also referred to as self-plagiarism, is the reproduction of an author's own text from a previous publication in a new publication. Opinions on the acceptability of this practice vary, with some viewing it as acceptable and efficient, and others as misleading and unacceptable. In light of the lack of consensus, journal editors often have difficulty deciding how to act upon the discovery of text recycling. In response to these difficulties, we have created a set of guidelines for journal editors on how to deal with text recycling. In this editorial, we discuss some of the challenges of developing these guidelines, and how authors can avoid undisclosed text recycling.

Acceptance of Swedish e-health services

Directory of Open Access Journals (Sweden)

Mary-Louise Jung

2010-11-01

Full Text Available Mary-Louise Jung1, Karla Loria11Division of Industrial Marketing, e-Commerce and Logistics, Lulea University of Technology, SwedenObjective: To investigate older people’s acceptance of e-health services, in order to identify determinants of, and barriers to, their intention to use e-health.Method: Based on one of the best-established models of technology acceptance, Technology Acceptance Model (TAM, in-depth exploratory interviews with twelve individuals over 45 years of age and of varying backgrounds are conducted.Results: This investigation could find support for the importance of usefulness and perceived ease of use of the e-health service offered as the main determinants of people’s intention to use the service. Additional factors critical to the acceptance of e-health are identified, such as the importance of the compatibility of the services with citizens’ needs and trust in the service provider. Most interviewees expressed positive attitudes towards using e-health and find these services useful, convenient, and easy to use.Conclusion: E-health services are perceived as a good complement to traditional health care service delivery, even among older people. These people, however, need to become aware of the e-health alternatives that are offered to them and the benefits they provide.Keywords: health services, elderly, technology, Internet, TAM, patient acceptance, health-seeking behavior

Standard practice for design and use of safety alert system for hazardous work locations in the coatings and lining industry

International Nuclear Information System (INIS)

Anon.

1984-01-01

This practice covers a safety alert system for hazardous work locations and materials for the coatings and lining application industry. This practice is designed for multi-employer work sites. Limitations--This practice does not identify specific hazardous materials or work locations but provides a means for rating each. This standard may involve hazardous materials, operations, and equipment

Acceptability of general practice services for Afghan refugees in south-eastern Melbourne.

Science.gov (United States)

Manchikanti, Prashanti; Cheng, I-Hao; Advocat, Jenny; Russell, Grant

2017-04-01

Over 750000 refugees have resettled in Australia since 1945. Despite complex health needs related to prior traumatic experiences and the challenges of resettlement in a foreign country, refugees experience poor access to primary care. Health and settlement service providers describe numerous cultural, communication, financial and health literacy barriers. This study aimed to investigate the acceptability of general practitioner (GP) services and understand what aspects of acceptability are relevant for Afghan refugees in south-eastern Melbourne. Semi-structured interviews were conducted with two Afghan community leaders and 16 Dari- or English-speaking Afghan refugees who accessed GP services. Two distinct narratives emerged - those of recently arrived refugees and established refugees (living in Australia for 3 years or longer). Transecting these narratives, participants indicated the importance of: (1) a preference for detailed clinical assessments, diagnostic investigations and the provision of prescriptions at the first consultation; (2) 'refugee-friendly' staff; and (3) integrated, 'one-stop-shop' GP clinic features. The value of acceptable personal characteristics evolved over time - GP acceptability was less a consideration for recently arrived, compared with more, established refugees. The findings reinforce the importance of tailoring healthcare delivery to the evolving needs and healthcare expectations of newly arrived and established refugees respectively.

Food irradiation receives international acceptance

Energy Technology Data Exchange (ETDEWEB)

Beddoes, J M [Atomic Energy of Canada Ltd., Ottawa, Ontario. Commercial Products

1982-04-01

Irradiation has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of /sup 60/Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient.

Food irradiation receives international acceptance

International Nuclear Information System (INIS)

Beddoes, J.M.

1982-01-01

Irradition has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of 60 Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient

Should patient groups accept money from drug companies? No

OpenAIRE

Mintzes, Barbara

2007-01-01

Patient groups provide valuable support and advocacy for vulnerable people but funding the work can be difficult. Alastair Kent argues that not accepting industry money will unnecessarily limit the groups' effectiveness, but Barbara Mintzes believes that the money undermines their independence

Should patient groups accept money from drug companies? Yes

OpenAIRE

Kent, Alastair

2007-01-01

Patient groups provide valuable support and advocacy for vulnerable people but funding the work can be difficult. Alastair Kent argues that not accepting industry money will unnecessarily limit the groups' effectiveness, but Barbara Mintzes believes that the money undermines their independence

Standard practice for qualification and acceptance of boron based metallic neutron absorbers for nuclear criticality control for dry cask storage systems and transportation packaging

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This practice provides procedures for qualification and acceptance of neutron absorber materials used to provide criticality control by absorbing thermal neutrons in systems designed for nuclear fuel storage, transportation, or both. 1.2 This practice is limited to neutron absorber materials consisting of metal alloys, metal matrix composites (MMCs), and cermets, clad or unclad, containing the neutron absorber boron-10 (10B). 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Fourth youth scientifically-practical conference Nuclear-industrial complex of Ural: problems and prospects. Theses of reports

International Nuclear Information System (INIS)

2007-01-01

Theses of reports of the Fourth youth scientifically-practical conference Nuclear-industrial complex of Ural: problems and prospects (18-20 April 2007, Ozersk) are presented. The book contains theses of reports of the seventh subject sections: NFC: science and industry; Ecological problems in NFC development: radiation safety, radioecology and radiobiology; Nuclear power engineering: economics, safety, field experience; Atomic branch: history, today and future; New technologies in education. Education and training for NFC plants, public opinion; Information technologies and telecommunications; Long-term science intensive technologies and new materials [ru

Two-Person Control: A Brief History and Modern Industry Practices

Energy Technology Data Exchange (ETDEWEB)

Pedersen, Robert Douglas [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2017-07-01

Physical asset protection is the principal objective of many security and safeguard measures. One well-known means of asset protection is two-person control. This paper reviews literature regarding two-person control to gain insight into its origin, first demonstrated uses, and its presence in several modern industries. This literature review of two-person control is intended to benefit people and organizations with a desire to understand its origins and how the practice has evolved over time, as well as give some insight into the flexibility of this safeguarding technique. The literature review is focused in four main sections: (1) defining two-person control, (2) early history, (3) two-person control in modern industry, and (4) a theory on how two- person control entered modern industry. ACKNOWLEDGEMENTS The author would like to thank Jarret Lafleur and Scott Paap of Sandia National Laboratories, California's Systems Analysis & Engineering organization for the opportunity to work on this project. Jarret Lafleur provided very constructive and helpful feedback through all stages of the work. Amanda Thompson of the Sandia California Technical Library maintained a great spirit and always had a quick document turnaround that very much helped out this project's completion. Additionally, yet perhaps most importantly, the author would like to thank his wife and daughter, along with the rest of his family, for continued support over the years. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525.

Determinants of the Acceptance of Sustainable Production Strategies among Dairy Farmers: Development and Testing of a Modified Technology Acceptance Model

Directory of Open Access Journals (Sweden)

Simona Naspetti

2017-10-01

Full Text Available An extended version of the Technology Acceptance Model (TAM was applied by means of Structural Equation Modelling to testing various hypotheses on attitudes and intentions of dairy farmers towards three novel sustainable production strategies, as well as the influence of organic practices and collaborative behaviours, such as information sharing with supply-chain partners. Data on the acceptance of three sustainable production strategies, namely ‘Agro-forestry’, ‘Alternative protein source’, and ‘Prolonged maternal feeding’ were collected by a survey of dairy farmers in six European Union (EU countries (Austria, Belgium, Denmark, Finland, Italy, United Kingdom. We found that perceived usefulness is the key determinant of acceptance, while the intention to adopt a sustainable production strategy may derive from the influence of opinions (and behaviours of relevant others (e.g., leading dairy farmers, family members, advisors showing the role of interactions among farmers and other stakeholders in the adoption of innovations. Finally, the perceived usefulness of all of the investigated strategies is higher for organic farmers, while collaborative patterns reduce the impact of subjective norm on usefulness and overall acceptance. Our findings should encourage policy makers to consider the important role of supply chain management practices, including collaboration, to enhance the sustainability of dairy farming systems.

12 CFR 250.164 - Bankers' acceptances.

Science.gov (United States)

2010-01-01

.... The legislative history of the BESA indicates no intent to change this domestic acceptance limitation... financial statements prepared in accordance with local accounting practices and an explanation of the accounting terminology and the major features of the accounting standards used in the preparation of the...

Dark chocolate acceptability: influence of cocoa origin and processing conditions.

Science.gov (United States)

Torres-Moreno, Miriam; Tarrega, Amparo; Costell, Elvira; Blanch, Consol

2012-01-30

Chocolate properties can vary depending on cocoa origin, composition and manufacturing procedure, which affect consumer acceptability. The aim of this work was to study the effect of two cocoa origins (Ghana and Ecuador) and two processing conditions (roasting time and conching time) on dark chocolate acceptability. Overall acceptability and acceptability for different attributes (colour, flavour, odour and texture) were evaluated by 95 consumers. Differences in acceptability among dark chocolates were mainly related to differences in flavour acceptability. The use of a long roasting time lowered chocolate acceptability in Ghanaian samples while it had no effect on acceptability of Ecuadorian chocolates. This response was observed for most consumers (two subgroups with different frequency consumption of dark chocolate). However, for a third group of consumers identified as distinguishers, the most acceptable dark chocolate samples were those produced with specific combinations of roasting time and conching time for each of the cocoa geographical origin considered. To produce dark chocolates from a single origin it is important to know the target market preferences and to select the appropriate roasting and conching conditions. Copyright © 2011 Society of Chemical Industry.

Public acceptance of HTGR technology - HTR2008-58218

International Nuclear Information System (INIS)

Hannink, R.; Kuhr, R.; Morris, T.

2008-01-01

Nuclear energy projects continue to evoke strong emotional responses from the general public throughout the world. High Temperature Gas-Cooled Reactor (HTGR) technology offers improved safety and performance characteristics that should enhance public acceptance but is burdened with demonstrating a different set of safety principles. This paper summarizes key issues impacting public acceptance and discusses the importance of openly engaging the public in the early stages of new HTGR projects. The public gets information about new technologies through schools and universities, news and entertainment media, the internet, and other forms of information exchange. Development of open public forums, access to information in understandable formats, participation of universities in preparing and distributing educational materials, and other measures will be needed to support widespread public confidence in the improved safety and performance characteristics of HTGR technology. This confidence will become more important as real projects evolve and participants from outside the nuclear industry begin to evaluate the real and perceived risks, including potential impacts on public relations, branding, and shareholder value when projects are announced. Public acceptance and support will rely on an informed understanding of the issues and benefits associated with HTGR technology. Major issues of public concern include nuclear safety, avoidance of greenhouse gas emissions, depletion of natural gas resources, energy security, nuclear waste management, local employment and economic development, energy prices, and nuclear proliferation. Universities, the media, private industry, government entities, and other organizations will all have roles that impact public acceptance, which will likely play a critical role in the future markets, siting, and permitting of HTGR projects. (authors)

Student attitudes towards socially acceptable and unacceptable group working practices.

Science.gov (United States)

Underwood, Jean D M

2003-08-01

While there is much support for co-operative learning among learning theorists, not all learners exhibit the same enthusiasm for groupwork. A number of factors such as sex, group size and ability mix, subject domain, task type and organization have been shown to influence the effectiveness of co-operative and collaborative learning. This study established learners' attitudes to various shared working scenarios. In this mixed design, 140 post-graduate teacher trainees were asked to imagine their responses to seven groupwork scenarios presented as a series of short vignettes. The vignettes varied on the degree of co-operation required; the sex of the prospective co-worker(s) including single and mixed-sex groups; type of assessment, including no assessment at all; and on academically acceptable and unacceptable 'shared' working practices. Anticipated attitudinal and behavioural responses of the students were assessed by questionnaire. On the whole, students were cautiously willing to be involved in groupwork. There were caveats, however. Factors such as the characteristics of the group members, the level and type of assessment procedures in operation, and individual differences, including sex and self-reported social deviance, also governed their responses. There was very limited agreement to be involved in socially undesirable collaborative group activities at a personal level or to condone such activities by others. Those students who showed a tendency towards mild anti-social behaviour were more willing to take direct punitive action against non-contributors than their peers. Female students were more willing to invoke the help of the tutor than their male counterparts, but only if the anti-social behaviour impacted on them personally.

Gender differences in technology acceptance in selected South African companies: Implications for electronic learning

Directory of Open Access Journals (Sweden)

Willie T. Chinyamurindi

2010-11-01

Research: The objective of this study was to investigate trainees’ acceptance of electronic coursework as an instruction and learning technique in various industries in the South African context. Motivation for the study: A persistent gender imbalance in the South African work-place has been noted to exist chiefly in the Science, Engineering and Technology (SET sectors, areas that have an important bearing on South Africa’s global competitiveness. This study explores how gender imbalance manifests in terms of trainee acceptance of electronic coursework. Research design, approach and method: A cross-sectional survey design was used. A survey was conducted amongst 191 employees in the SET sector. The measuring instrument used was the Technology Acceptance Instrument (TAI and included measures of Computer Self-Efficacy (CSE, Perceived Ease of Use (PEU, Perceived Usefulness (PU and Behavioural Intention to Use (BI. Main findings: Women ratings of the TAI to use the electronic coursework were slightly higher than men’s ratings. Multiple regression analyses were also carried out to measure the variation in the level of influence with gender as a predictor variable. The results showed that compared to women, men had a lower salient effect of elements of the TAI, notably, CSE–PU; PU–BI and BI–PEU. However, compared to men, women had a higher salient effect in terms of the relationship between CSE–PU and PU–PEU. Practical implications: The implication of the results is that interventions that focus on the human resources development of employees using electronic coursework (namely, CSE, PEU, PU and BI are worth considering as they influence the acceptance of the interventions. Contribution/value-add: The study contributes to existing knowledge about the conditions that precede employee acceptance of an electronic coursework intervention within the South African context. The study shows the important role dimensions of the Technology Acceptance Instrument

Application and development of peer review in China's nuclear power industry

International Nuclear Information System (INIS)

Huang Ping

2014-01-01

Peer review is one of the scientific methods and tools in management, which plays an active role in promoting and improving the performance of safe operation and management level of nuclear power plants. Peer review of nuclear power is not only comprehensively popularized and applied in China, but it is also innovated and developed in industry at all levels in recent years. In this paper, with the CNNC's relevant practice as main line, a variety of accepted peer review methods both at home and abroad were compared and analyzed, and the current application and development of peer review in China's nuclear power industry were described, as well as some suggestions for improvement were put forward to share with our craft brothers. (author)

Breaking up is hard to do: lessons learned from a pharma-free practice transformation.

Science.gov (United States)

Evans, David; Hartung, Daniel M; Beasley, Denise; Fagnan, Lyle J

2013-01-01

Academic medical centers are examining relationships with the pharmaceutical industry and making changes to limit interactions. Most doctors, however, practice outside of academic institutions and see pharmaceutical detailers and accept drug samples and gifts. Little guidance for practicing physicians exists about transforming practices to become pharma-free. Consideration must be given to the impact on practice culture, staff views, and patient needs. A small private practice, setting out to transform into a pharma-free clinic, used a practice transformation process that examined the industry presence in the clinic, educated the doctors on potential conflicts of interest, and improved practice flow. Staff were given the opportunity to share concerns, and their issues were acknowledged. Educational interventions were developed to help providers keep current. Finally, efforts were made to educate patients about the policy. The clinic recorded the degree to which it was detailed. Loss of gifts, keeping current with new drugs, and managing without samples were noted concerns. Policy change champions developed strategies to address concerns. A shift in practice culture to a pharma-free clinic is achievable and maintainable over time. Barriers to success can be identified and overcome with attention given to careful gathering of information, staff input, and stakeholder education.

Industry honoured

CERN Multimedia

2008-01-01

CERN has organised a day to thank industry for its exceptional contributions to the LHC project. Lucio Rossi addresses CERN’s industrial partners in the Main Auditorium.The LHC inauguration provided an opportunity for CERN to thank all those who have contributed to transforming this technological dream into reality. Industry has been a major player in this adventure. Over the last decade it has lent its support to CERN’s teams and participating institutes in developing, building and assembling the machine, its experiments and the computing infrastructure. CERN involved its industrial partners in the LHC inauguration by organising a special industry prize-giving day on 20 October. Over 70 firms accepted the invitation. The firms not only made fundamental contributions to the project, but some have also supported LHC events in 2008 and the inauguration ceremony through generous donations, which have been coordinated by Carmen Dell’Erba, who is responsible for secu...

The "We Card" program: tobacco industry "youth smoking prevention" as industry self-preservation.

Science.gov (United States)

Apollonio, Dorie E; Malone, Ruth E

2010-07-01

The "We Card" program is the most ubiquitous tobacco industry "youth smoking prevention" program in the United States, and its retailer materials have been copied in other countries. The program's effectiveness has been questioned, but no previous studies have examined its development, goals, and uses from the tobacco industry's perspective. On the basis of our analysis of tobacco industry documents released under the 1998 Master Settlement Agreement, we concluded that the We Card program was undertaken for 2 primary purposes: to improve the tobacco industry's image and to reduce regulation and the enforcement of existing laws. Policymakers should be cautious about accepting industry self-regulation at face value, both because it redounds to the industry's benefit and because it is ineffective.

failures diagnosis. Theory and practice for industrial systems

International Nuclear Information System (INIS)

Zwingelstein, G.

1995-01-01

Failure diagnosis methods represent appreciable tools for the maintenance and the improvement of availability and safety in complex industrial installations. The industrial diagnosis can be assimilated to a deterministic causality relation between the cause and the effect. This book describes the methodology associated to the resolution of the diagnosis problem applied to complex industrial system failures, and evaluates the principles of the main diagnosis methods. The introduction presents the terminology and norms used in the industry to situate the diagnosis context in the possession cost of a product. After a formulation of the diagnosis in the form of the resolution of inverse problems, the author gives details about the inductive and deductive methods and about internal and external diagnosis methods. Each method is illustrated with examples taken in the industry with recommendations about their operating limitations. Finally, a guideline summarizes the principal criteria for the selection of an industrial diagnosis method according to the available informations. (J.S.). 168 refs., 294 figs., 22 tabs., 1 annexe

Role of market information in gaining public acceptance

International Nuclear Information System (INIS)

Berman, A.B.

1992-01-01

The nuclear energy industry challenge to gain acceptance for its next generation of nuclear power plants is immense. If not the majority, then a vocal minority, has doubts about the technology, its need, or those who implement it. Perceptions about the nuclear industry are complex. These are due to the difficulty in understanding the technology itself, the trade-offs of benefits against repercussions, and well-publicized plant problems. The industry requires a continual flow of actionable and comprehensive market information as input for decision making. The cost of implementing misdirected strategies is high. If not sensitive to public needs, the cost is opposition to nuclear development based on faulty or unsubstantiated reasoning. This paper addresses the required market information flow. It is suggested that a market information system is necessary for timely and usable information to ensure understanding of industry developmental efforts

The role of practical training in educating future cadre in hotel industry and tourism

Directory of Open Access Journals (Sweden)

Sekulić Dejan

2015-01-01

Full Text Available Tourism stimulates the work of a large number of small and medium companies, who provide increase of the number of employees. By following the trends, high education institutions try to provide expert cadre who will be future transmitters of trends in the field. In order to preserve and enhance the quality of education in this area it is necessary to take care of the quality of the program of practical training as the bridge between formal education and work in tourism. In that context, the aim of the research was to explore the role and importance of practical training in the education of students in hotel industry and tourism. The research included 134 respondents, divided in two groups depending upon whether they had any experience in practical training in hotels and tourist agencies. The result shows that there are no significant differences in the perception of the importance of practical training and the factors which influence the selection of the company in which students perform practical training. On the other hand, the results show that there are significant differences, related to the role of hotels and tourist agencies in their practical education and competencies they should master at the end of the training, between those students who had practical training and those who have not had it yet.

Challenges and Strength of Current Industrial Energy Efficiency Management Practices in Steam Industries

Science.gov (United States)

Nkosi, S. B.; Pretorius, J. H. C.

2017-07-01

The aim of this study is to achieve greater output by examining the existing way of coordinating the determined attempts of Steam Industries in South Africa to successfully reach a sustainable industrial development by using energy source adequately in a more competent way. Furthermore into the study we look at obstacles that prevent and those that leads to maximum utilization of energy management measures and also highlights the effects of implementing cheap available energy source in South Africa. The investigation and analysis have shown that energy is not well managed in Steam Industries and that the use of energy is minimized and not fully utilized due to poor management and lack of knowledge. Another detection was that lack of government structured and strategic measures of implementing and motivating the use of energy effectively. The effective and rational use of available power by Steam Industries in South Africa is a key player in developing a sustainable industrial development. The use of energy efficiency management strategies has contributed an increase in economic and improve environmentally friendly in the industrial sector. The slow pace adoption of energy saving and cost effective management programmes are negatively impacting on the benefits to Steam Industries in South Africa. In conclusion the study finds that the economy can be boosted by implementing energy efficiency management programmes and environmentally friendly. These will also stabilize the negative impact of energy raising prices.

Work health and safety in cotton ginning industry: a survey of practices in australia

International Nuclear Information System (INIS)

Soomro, N.

2015-01-01

This survey focuses on the WH and S (Work Health and Safety) practices in Australia and relates them with those in Pakistan. It also highlights the planned areas of work required on WH and S in cotton ginning industry of Pakistan. This article is one a series of research studies that will inform a broader approach development. The aim of the survey was to design a standardized health and safety Act for cotton ginning industry of Pakistan and to help ginners meet their due industry obligations under the model WH and S Act. The first component of the research study survey was to review the relevant Australian work and safety model as this provides a framework to protect the health, safety and welfare of all employees at work and of other people who might be affected by the job. The second aspect of the research study survey concerned site visits to cotton gins with the support of Australian Centre for Agricultural Health and Safety, Moree, NSW. During these visits the existing ginning process in terms of WH and S were reviewed. Informal interviews were also conducted with Gin Managers and Ginning Experts regarding WH and S in the Australian cotton ginning industry. (author)

Computer therapy for the anxiety and depressive disorders is effective, acceptable and practical health care: a meta-analysis.

Directory of Open Access Journals (Sweden)

Gavin Andrews

Full Text Available BACKGROUND: Depression and anxiety disorders are common and treatable with cognitive behavior therapy (CBT, but access to this therapy is limited. OBJECTIVE: Review evidence that computerized CBT for the anxiety and depressive disorders is acceptable to patients and effective in the short and longer term. METHOD: Systematic reviews and data bases were searched for randomized controlled trials of computerized cognitive behavior therapy versus a treatment or control condition in people who met diagnostic criteria for major depression, panic disorder, social phobia or generalized anxiety disorder. Number randomized, superiority of treatment versus control (Hedges g on primary outcome measure, risk of bias, length of follow up, patient adherence and satisfaction were extracted. PRINCIPAL FINDINGS: 22 studies of comparisons with a control group were identified. The mean effect size superiority was 0.88 (NNT 2.13, and the benefit was evident across all four disorders. Improvement from computerized CBT was maintained for a median of 26 weeks follow-up. Acceptability, as indicated by adherence and satisfaction, was good. Research probity was good and bias risk low. Effect sizes were non-significantly higher in comparisons with waitlist than with active treatment control conditions. Five studies comparing computerized CBT with traditional face-to-face CBT were identified, and both modes of treatment appeared equally beneficial. CONCLUSIONS: Computerized CBT for anxiety and depressive disorders, especially via the internet, has the capacity to provide effective acceptable and practical health care for those who might otherwise remain untreated. TRIAL REGISTRATION: Australian New Zealand Clinical Trials Registry ACTRN12610000030077.

Coding of DNA samples and data in the pharmaceutical industry: current practices and future directions--perspective of the I-PWG.

Science.gov (United States)

Franc, M A; Cohen, N; Warner, A W; Shaw, P M; Groenen, P; Snapir, A

2011-04-01

DNA samples collected in clinical trials and stored for future research are valuable to pharmaceutical drug development. Given the perceived higher risk associated with genetic research, industry has implemented complex coding methods for DNA. Following years of experience with these methods and with addressing questions from institutional review boards (IRBs), ethics committees (ECs) and health authorities, the industry has started reexamining the extent of the added value offered by these methods. With the goal of harmonization, the Industry Pharmacogenomics Working Group (I-PWG) conducted a survey to gain an understanding of company practices for DNA coding and to solicit opinions on their effectiveness at protecting privacy. The results of the survey and the limitations of the coding methods are described. The I-PWG recommends dialogue with key stakeholders regarding coding practices such that equal standards are applied to DNA and non-DNA samples. The I-PWG believes that industry standards for privacy protection should provide adequate safeguards for DNA and non-DNA samples/data and suggests a need for more universal standards for samples stored for future research.

Acceptance and citizen participation for renewable energies. Findings from the research of acceptance and participation; Akzeptanz und Buergerbeteiligung fuer Erneuerbare Energien. Erkenntnisse aus Akzeptanz- und Partizipationsforschung

Energy Technology Data Exchange (ETDEWEB)

Wunderlich, Clemens

2012-11-15

The review under consideration reports on the acceptance and citizen participation in renewable energies. First of all, the authors define the term acceptance and describe the process of how this term is developed. Subsequently, the authors use the results of a representative survey by TNS Infratest (Munich, Federal Republic of Germany) in order to describe the peculiarity of the technology-specific acceptance of renewable energies in Germany. The facility-related acceptance of renewable energies is described in conjunction with the question whether there is a so-called NIMBY (Not in my backyard effect). Acceptable solutions for the problems of acceptance are presented based on two best practice examples by means of different procedures of the citizen's participation.

Practice-Oriented Formal Methods to Support the Software Development of Industrial Control Systems

CERN Document Server

AUTHOR|(CDS)2088632; Blanco Viñuela, Enrique

Formal specification and verification methods provide ways to describe requirements precisely and to check whether the requirements are satisfied by the design or the implementation. In other words, they can prevent development faults and therefore improve the quality of the developed systems. These methods are part of the state-of-the-practice in application domains with high criticality, such as avionics, railway or nuclear industry. The situation is different in the industrial control systems domain. As the criticality of the systems is much lower, formal methods are rarely used. The two main obstacles to using formal methods in systems with low- or medium-criticality are performance and usability. Overcoming these obstacles often needs deep knowledge and high effort. Model checking, one of the main formal verification techniques, is computationally difficult, therefore the analysis of non-trivial systems requires special considerations. Furthermore, the mainly academic tools implementing different model c...

Consumer views on the acceptance of irradiated food

International Nuclear Information System (INIS)

Taylor, J.

1992-01-01

Scientists, technologists and equipment manufacturers do not a successful process make. And yet to many - outsiders, consumers and food industry alike -these three groups increasingly appear to believe they are indeed all that is necessary to ensure marketplace acceptance and utilisation. The reality is that the food irradiation industry is increasingly facing the risk of becoming irrelevant. The potential of this new technology is undoubtedly immense and the sheer scientific creativity of it has the ring of the 21st Century. Unfortunately the methods used to communicate the positive benefits of the technology are reminiscent of the 1950's. Unless the food irradiation industry comes to terms with this it may well have wasted 4 decades of research and development work. (orig.) [de

Project management practice and its effects on project success in Malaysian construction industry

Science.gov (United States)

Haron, N. A.; Devi, P.; Hassim, S.; Alias, A. H.; Tahir, M. M.; Harun, A. N.

2017-12-01

The rapid economic development has increased the demand for construction of infrastructure and facilities globally. Sustainable development and globalization are the new ‘Zeitgeist’ of the 21st century. In order to implement these projects successfully and to meet the functional aim of the projects within their lifetime, an efficient project management practice is needed. The aim of this study is to identify the critical success factors (CSFs) and the extent of use of project management practice which affects project success, especially during the implementation stage. Data were obtained from self-administered questionnaires with 232 respondents. A mixed method of data collection was adopted using semi-structured interview and questionnaire approach. The result of the analysis of data obtained showed that new and emerging criteria such as customer satisfaction, competency of the project team, and performance of subcontractors/suppliers are becoming measures of success in addition to the classic iron triangle’s view of time, cost and quality. An insight on the extent of use of different project management practice in the industry was also achieved from the study.

Justice perceptions of performance management practices in a company in the chemical industry

Directory of Open Access Journals (Sweden)

Thanasagree Govender

2015-11-01

Full Text Available The sustainability of corporations globally is becoming increasingly problematic. Combined with the unique challenges of an operating entity, this could potentially expose the profitability of sustainable businesses on a daily basis. The purpose of this study is to evaluate employees’ justice perceptions of performance management practices in a company in the chemical industry. The population includes all the employees in the chemical industry that was used in this study. A total of 140 questionnaires were issued to all the employees in an organisation which had undergone a performance appraisal and 102 respondents completed the surveys, giving a response rate of 72 per cent. A cross-sectional survey design was used in this study. The justice perceptions were measured according to an existing framework developed by Thurston and McNall (2010. The framework is founded on a hypothesised four-factor model constructed according to theories on organisational justice. The employees of the organisation in the chemical sector were involved in this study. Descriptive statistical analyses were used to measure perceptions of justice based on theories on organisational justice. The measuring instrument used was based on recognised models and theories. The study supports the construct validity of the measuring instrument and the reliability of the scales used. The justice constructs were used to identify specific items in the performance management practice that required improvement. The implications of the results are that continual interventions are required if employee commitment and productivity levels are to improve, resulting in a positive impact on business performance. Significant differences in perceptions by demographic groups were reported and discussed. This study explored the importance of understanding justice perceptions of performance management practices as an enabler for sustained business performance. Further, the study confirmed that

On the Acceptance of Gain Sharing Methods in Supply Chain Collaboration

NARCIS (Netherlands)

Grigoriev, Alexander; Jung, Verena; Peeters - Rutten, Marianne; Vredeveld, Tjark

2017-01-01

Purpose – The purpose of this paper is to investigate the acceptance of different gain sharing methods in practice. In addition, the influence of behavioural aspects on the acceptance of these allocation methods is observed. Design/methodology/approach – In order to investigate the research

[Acceptance of generic prescribing in general practice: effect of patient education and reference prices].

Science.gov (United States)

Vallès, J A; Barreiro, M; Cereza, G; Ferro, J J; Martínez, M J; Cucurull, E; Barceló, E

2002-01-01

To assess patient acceptance of the substitution of brand-name drugs for generic equivalents in the context of repeat prescriptions for chronic diseases. A prospective multicenter study of drug use was performed. Of the 31 centers included in the study, 8 were randomized to the intervention group and 23 to the control group. For 1 year, patients in the intervention group who visited the center to collect repeat prescriptions received verbal and written information on the advantages and disadvantages of generic and brand name drugs. Data on the number of patients taking brand-name drugs for which generic equivalents were available, as well as the reasons and variables related to refusal of generic drugs (age, gender, education, primary care centre, general practitioner, type of drug and total number of repeat prescriptions) were collected. The percentage of generic drugs among the total number of drugs prescribed was calculated at 2-monthly intervals. A total of 98.9% of the 4620 patients in the intervention group agreed to change to a generic formulation. The percentage of patients accepting generic drugs was significantly associated with the primary care centre, the class of drug, doctors' influence, and patient satisfaction with the drug. Generic prescriptions represented 5.9% in the intervention practices compared with 2.8% in controls. After the intervention, and before the application of reference prices, the percentages were 6.7% and 3.9%, respectively. Immediately after application of the reference prices, the percentages were 8.6% and 6.3%, respectively. Direct patient education is an effective strategy in increasing the prescription of generic equivalents. General practitioners' motivation and knowledge of generic drugs influenced their use. The application of reference prices increased the use of generic equivalents.

Contribution of student involvement in production/service unit and experience of industry practices to entrepreneurial attitude and the impact entrepeneurship readiness of vocational high school students of great Malang

Science.gov (United States)

Mukminna, Halimahtus; Isnandar, Muladi

2017-09-01

Purpose of this research was to determine the contribution of student involvement in production/ service unit (X1), experience of industry practices (X2), and entrepreneurial attitude (Y) towards readiness entrepreneurship (Z) of vocational student regional Malang. The design of the study using a quantitative approach. The samples used as many as 130 respondents. Instruments used for collecting data in the form of questionnaires. Data analysis included descriptive and test of hypothesis. The result showed: that the description of data on the level of student involvement in production/ service unit, experience of industry practices, entrepreneurial attitude and entrepreneurship readiness in the high category. The contribution student involvement in production/ service unit of entrepreneurial attitude of 10.6%. The contribution experience of industry practices of entrepreneurial attitude of 17.4%. The contribution student involvement in production/ service unit and experience of industry practices simultaneously to entrepreneurial attitude of 44.1%. The contribution student involvement in production/ service unit of readiness entrepreneurship of 4%. The contribution experience of industry practices of readiness entrepreneurship of 5%. The contribution entrepreneurial attitude of readiness entrepreneurship of 16%. Finally, the contribution student involvement in production/ service unit, experience of industry practices, and entrepreneurial attitude simultaneously to readiness entrepreneurship of 50.3%.

Enhancing engineering practices for productivity and profits in agro-allied industries

International Nuclear Information System (INIS)

Esan, A. A.

2000-08-01

The word productivity is a part of everyday vocabulary of industrial engineers and managers. Terms such as optimum utilization of resources, operational efficiency, product competitiveness, maintenance culture, etc., are mentioned with regular frequency. This is healthy, because productivity improvement does not happen by wishing for it or trying harder but by deliberately planning for it. The rewards of higher productivity are immense. At the firm level, such benefit include high production rates, higher profits, better quality products and services, customer satisfaction, higher take home pay for employees and high employee morale. Many of these benefits can be derived through the application of simple potential productivity improvement tools that are hinged on engineering practices

Building world-wide nuclear industry success stories - Safe management of nuclear waste and used nuclear fuel

International Nuclear Information System (INIS)

Saint-Pierre, S.

2005-01-01

Full text: This WNA Position Statement summarizes the worldwide nuclear industry's record, progress and plans in safely managing nuclear waste and used nuclear fuel. The global industry's safe waste management practices cover the entire nuclear fuel-cycle, from the mining of uranium to the long-term disposal of end products from nuclear power reactors. The Statement's aim is to provide, in clear and accurate terms, the nuclear industry's 'story' on a crucially important subject often clouded by misinformation. Inevitably, each country and each company employs a management strategy appropriate to a specific national and technical context. This Position Statement reflects a confident industry consensus that a common dedication to sound practices throughout the nuclear industry worldwide is continuing to enhance an already robust global record of safe management of nuclear waste and used nuclear fuel. This text focuses solely on modern civil programmes of nuclear-electricity generation. It does not deal with the substantial quantities of waste from military or early civil nuclear programmes. These wastes fall into the category of 'legacy activities' and are generally accepted as a responsibility of national governments. The clean-up of wastes resulting from 'legacy activities' should not be confused with the limited volume of end products that are routinely produced and safely managed by today's nuclear energy industry. On the significant subject of 'Decommissioning of Nuclear Facilities', which is integral to modern civil nuclear power programmes, the WNA will offer a separate Position Statement covering the industry's safe management of nuclear waste in this context. The safe management of nuclear waste and used nuclear fuel is a widespread, well-demonstrated reality. This strong safety record reflects a high degree of nuclear industry expertise and of industry responsibility toward the well-being of current and future generations. Accumulating experience and

Industrial safety in a nuclear decommissioning environment observations and lessons learned

International Nuclear Information System (INIS)

Brevig, D.

2008-01-01

Decommissioning activities present unusual and unexpected workplace safety challenges that go far beyond the traditional experience of nuclear power plant managers. A blend of state-of-the-art safety program management tools along with new and practical applications are required to ensure high industrial safety performance. The demanding and rigorously applied nuclear safety engineering standards that are accepted as normal and routine in the operation of a nuclear power facility, should transform as an industrial safety standard during the non-operating period of decommissioning. In addition, historical measures of non-nuclear industrial safety injury rates would or should not be acceptable safety behaviors during a nuclear decommissioning project. When complex projects, such as the decommissioning of a nuclear generating facility are undertaken, the workforce brings experience, qualifications, and assumptions to the project. The overall multi-year general schedule is developed, with more schedule details, for example, for the nearest rolling 12-18 months. Methods are established for the selection of contractors to assist in areas that are not normal tasks for the facility workforce, whose normal activity is managing and operating a nuclear generating station. However, it is critical to manage those contractors to the agreed work scope to ensure success is maintained by both parties, e.g. the job gets done, on schedule, on budget, all parties are financially whole when the work is complete, and safely. The purpose of this paper is to provide a perspective of nuclear plant personal safety in the ever changing industrial environment created by the demolition of robust and often radiologically contaminated structures in a nuclear facility decommissioning project. (author)

Industrial safety in a nuclear decommissioning environment observations and lessons learned

Energy Technology Data Exchange (ETDEWEB)

Brevig, D. [Independent Consultant, San Clemente (United States)

2008-07-01

Decommissioning activities present unusual and unexpected workplace safety challenges that go far beyond the traditional experience of nuclear power plant managers. A blend of state-of-the-art safety program management tools along with new and practical applications are required to ensure high industrial safety performance. The demanding and rigorously applied nuclear safety engineering standards that are accepted as normal and routine in the operation of a nuclear power facility, should transform as an industrial safety standard during the non-operating period of decommissioning. In addition, historical measures of non-nuclear industrial safety injury rates would or should not be acceptable safety behaviors during a nuclear decommissioning project. When complex projects, such as the decommissioning of a nuclear generating facility are undertaken, the workforce brings experience, qualifications, and assumptions to the project. The overall multi-year general schedule is developed, with more schedule details, for example, for the nearest rolling 12-18 months. Methods are established for the selection of contractors to assist in areas that are not normal tasks for the facility workforce, whose normal activity is managing and operating a nuclear generating station. However, it is critical to manage those contractors to the agreed work scope to ensure success is maintained by both parties, e.g. the job gets done, on schedule, on budget, all parties are financially whole when the work is complete, and safely. The purpose of this paper is to provide a perspective of nuclear plant personal safety in the ever changing industrial environment created by the demolition of robust and often radiologically contaminated structures in a nuclear facility decommissioning project. (author)

Cost Management Practices and Strategic Perspectives: a study in the construction industry of the State of Paraná

OpenAIRE

Almeida, Lauro Brito de; Machado, Esmael Almeida; Panhoca, Luiz

2012-01-01

The purpose of this paper is to investigate the cost management practices of building industry companies of Paraná that follow the typology of Porter´s strategies. The sample comprises member companies of the Association of Construction Industries of the State of Paraná (PR-SINDUSCON) operating in the segment of residential buildings. The data were collected by means of questionnaires sent to 317 SINDUSCON members. 69 were returned and 54 used for our research. Exploratory Factorial Analysis ...

Intrinsic and extrinsic influences on children's acceptance of new foods.

Science.gov (United States)

Blissett, Jackie; Fogel, Anna

2013-09-10

The foods that tend to be rejected by children include those which may have greatest importance for later health. This paper reviews some of the intrinsic and extrinsic influences on preschool children's eating behavior, with particular reference to their acceptance of new foods into their diet. Factors conceptualized as intrinsic to the child in this review include sensory processing, taste perception, neophobia, and temperament. The important extrinsic determinants of children's food acceptance which are reviewed include parental and peer modeling, the family food environment, infant feeding practices including breastfeeding and age at weaning, concurrent feeding practices including restriction, pressure to eat, prompting and reward, and the taste & energy content of foods. Children's willingness to accept new foods is influenced by a wide range of factors that likely have individual and also interactive effects on children's willingness to taste, and then continue to eat, new foods. The literature lacks longitudinal and experimental studies, which will be particularly important in determining interventions most likely to be effective in facilitating children's acceptance of healthy foods. Copyright © 2013 Elsevier Inc. All rights reserved.

Competitive Intelligence Practices And Their Effect on Profitability of Firms In The Kenyan Banking Industry

Directory of Open Access Journals (Sweden)

JOHN KARANJA NGUGI

2013-07-01

Full Text Available The rapidly changing business climate created by advances in technologies, economic and social changes as well as fast-shortening product life cycles, which lead to hyper-competition, demands that firms embrace competitive intelligence as a strategy. This study sought to fill the existing knowledge gap by carrying out an investigation of competitive intelligence practices for greater profitability in the commercial banking industry in Kenya. The management staffs who directly deal with the day to day management of the banks were selected to collect primary data. The study concludes that adoption of competitive intelligence practices affect the profitability of the banking sector.

A Model for Promoting Poultry Industry Development in Togo: Part 1. Management Practices and Incubation Conditions

NARCIS (Netherlands)

Tona, K.; Agbonon, A.; Eklu-Gadegbeku, K.; Teteh, A.; Simons, P.; Buyse, J.; Everaert, N.; Kemp, B.; Decuypere, E.; Gbeassor, M.

2014-01-01

In commercial poultry husbandry practice, the hatchery takes over the incubation of bird eggs in order to provide as many day-old chicks as needed at any time to farmers. The main bottleneck for poultry industry development in Togo is the lack of day-old chick supply. Indeed, there is no proficient

The radiological impact of past and present practices of the mineral sands industry in Queensland

International Nuclear Information System (INIS)

Alexander, E.G.; Stewart, N.D.; Wallace, B.J.

1993-01-01

It is shown that the introduction of uniform Australian national Codes of Practice for radiation protection in the mining and milling of radioactive ores in the early 1980's has led to the mining and health regulatory authorities implementing the provisions of the Codes. Deficiencies involving dust and external gamma radiation levels in the mineral sands industry have led to various administrative and engineering controls being introduced to reduce the levels of radiation doses to employees well below 20 mSv/y limit. There are guidelines for screening the radioactivity of tailings released into the environment and some products for industrial use. Future activities by the regulatory authorities and industry will involve an optimisation of radiation protection, ongoing remedial programs, register of data about contaminated lands and assessments of the environmental, occupational and the public radiological impacts from downstream processing of mineral sands. The latter involves synthetic rutile, zircon flour, rare earth and refractory technologies. 7 refs., 1 tab., 1 fig

Quality assurance for the gas industry: lessons learnt from survey and studies carried out by study group 5.3; Assurance qualite pour l'industrie du gaz: lecons a tirer des travaux menes par le groupe d'etude 5.3

Energy Technology Data Exchange (ETDEWEB)

Brauer, R. [Swiss Gas and Water Industry Association (Switzerland); Fitzgerald, B. [Boral Energy Asset Management (Australia); Bayko, J.W. [Enbridge Consumers Gas (Canada)

2000-07-01

In a rapidly changing environment of competition, regulation and consumer service, quality management systems are increasingly gaining acceptance as an important business tool for gas distribution companies. This paper draws on the experiences of an industry association (Swiss Gas and Water Industry Association) and two gas distribution companies (Boral Energy Asset Management, Australia and Enbridge Consumers Gas, Canada) to illustrate how quality systems are being applied. While most companies acknowledge that quality is important to their success, there has been a genuine concern about the effort and cost of implementing and maintaining quality management systems. The first case study illustrates how one industry association is working to provide practical quality systems, developed specifically for utility businesses. The other two case studies illustrate how practical quality management systems are being applied to the evaluation of the critical field work performed by contractors and employees. The success of these systems has a significant impact on the future reliability and integrity of the distribution network and the safety of field crews and the community. (authors)

Acceptance sampling for attributes via hypothesis testing and the hypergeometric distribution

Science.gov (United States)

Samohyl, Robert Wayne

2017-10-01

This paper questions some aspects of attribute acceptance sampling in light of the original concepts of hypothesis testing from Neyman and Pearson (NP). Attribute acceptance sampling in industry, as developed by Dodge and Romig (DR), generally follows the international standards of ISO 2859, and similarly the Brazilian standards NBR 5425 to NBR 5427 and the United States Standards ANSI/ASQC Z1.4. The paper evaluates and extends the area of acceptance sampling in two directions. First, by suggesting the use of the hypergeometric distribution to calculate the parameters of sampling plans avoiding the unnecessary use of approximations such as the binomial or Poisson distributions. We show that, under usual conditions, discrepancies can be large. The conclusion is that the hypergeometric distribution, ubiquitously available in commonly used software, is more appropriate than other distributions for acceptance sampling. Second, and more importantly, we elaborate the theory of acceptance sampling in terms of hypothesis testing rigorously following the original concepts of NP. By offering a common theoretical structure, hypothesis testing from NP can produce a better understanding of applications even beyond the usual areas of industry and commerce such as public health and political polling. With the new procedures, both sample size and sample error can be reduced. What is unclear in traditional acceptance sampling is the necessity of linking the acceptable quality limit (AQL) exclusively to the producer and the lot quality percent defective (LTPD) exclusively to the consumer. In reality, the consumer should also be preoccupied with a value of AQL, as should the producer with LTPD. Furthermore, we can also question why type I error is always uniquely associated with the producer as producer risk, and likewise, the same question arises with consumer risk which is necessarily associated with type II error. The resolution of these questions is new to the literature. The

A case study of the Mexican avocado industry based on transaction costs and supply chain management practices

NARCIS (Netherlands)

Arana Coronado, J.J.; Bijman, J.; Omta, S.W.F.; Oude Lansink, A.

2015-01-01

The present study is based on transaction cost economics and supply chain management to analyze how the adoption of supply chain management practices in the Mexican avocado industry reduces the transaction costs between producers and packers. Two sources of information are used: interviews from

Industrial symbiosis

DEFF Research Database (Denmark)

Sacchi, Romain; Remmen, Arne

2017-01-01

This study examines the development of industrial symbiosis through a practical model for physical, organizational, and social interactions in six different cases from around the world. The results provide a framework that can be used by industrial symbiosis practitioners to facilitate the creation...

Cereal bars produced with banana peel flour: evaluation of acceptability and sensory profile.

Science.gov (United States)

Carvalho, Vania Silva; Conti-Silva, Ana Carolina

2018-01-01

A mixture design was used to investigate the effects of banana peel flour, rice flakes and oat flour on sensory acceptability of cereal bars, with subsequent evaluation of sensory profile of products identified as having high acceptability. Regions of greater response for acceptability of the cereal bars, which are dependent on the three investigated components, were found. Although having good acceptability, sensory profiles of cereal bars were different. A cereal bar with the lowest quantity of banana peel flour was described as having a higher amount of rice flakes, chewiness and crispness, while formulations with intermediate and highest quantities of banana peel flour were described by darker color, higher banana aroma and bitter taste. Contrary to expectations, banana flavor of cereal bar with highest quantity of banana peel flour was lower than cereal bars with intermediate quantities. Cereal bars were not different in terms of hardness and adhesiveness and they also had a similar sweet taste and oat flavor. The use of banana peel flour in production of cereal bars is feasible and, even with different sensory profiles, cereal bars with banana peel flour are acceptable, which may favor the development of new products for different market niches. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Advanced practice nurses: starting an independent practice.

Science.gov (United States)

Lambert, V A; Lambert, C E

1996-01-01

Independent or private practice is the delivery of nursing services provided by nurses over which nurses have full control. With a changing healthcare system, nurses are in a prime position to negotiate the delivery of appropriate, acceptable, and cost-effective health care as independent practitioners. This article addresses the mission and goals of independent practice, community need, business structure of the practice, housing the practice, legal considerations, financing the practice, marketing issues, clientele, record keeping, and reimbursement.

Irradiation technology - industrial use

International Nuclear Information System (INIS)

Zyball, A.

1995-01-01

The most important applications of the radiation technology are the crosslinking of polymers and sterilisation. Although extensive experience about the use of this technology is available and powerful and dependable radiation facilities can be obtained, as yet the radiation technology has not found the acceptance it deserves in the industry. The main reason therefore has to do with how the question of radiation or the term radiation is presented to the industry and among the population. This paper will deal with considerations and ways in which the industrial use of the radiation technology can be expanded. (author)

The problem of social opposition to industrial plants

International Nuclear Information System (INIS)

Malocchi, Andrea

1996-01-01

The problem of social opposition to the localization, construction and operation of industrial plants is a major social issue in many industrialized countries where environmental consciousness has rooted deeply in society. This paper proposes a general model for the analysis of the social conflict against the localization and operation of industrial plants. The paper investigates the difference between the 'risk analysis' approach and the 'social acceptability' approach in order to demonstrate the major influence of information and communication between industry and society on social consensus (rather than ordinary technological and environmental factors). In a second part the paper analyses a limit of social acceptability approach highlighting the role of environmental NGO's in the promotion and diffusion of the social protest. As a result of the analysis, a general model for the management of social consensus by companies and public authorities is provided

Quantitative microbiological risk assessment in food industry: Theory and practical application.

Science.gov (United States)

Membré, Jeanne-Marie; Boué, Géraldine

2018-04-01

The objective of this article is to bring scientific background as well as practical hints and tips to guide risk assessors and modelers who want to develop a quantitative Microbiological Risk Assessment (MRA) in an industrial context. MRA aims at determining the public health risk associated with biological hazards in a food. Its implementation in industry enables to compare the efficiency of different risk reduction measures, and more precisely different operational settings, by predicting their effect on the final model output. The first stage in MRA is to clearly define the purpose and scope with stakeholders, risk assessors and modelers. Then, a probabilistic model is developed; this includes schematically three important phases. Firstly, the model structure has to be defined, i.e. the connections between different operational processing steps. An important step in food industry is the thermal processing leading to microbial inactivation. Growth of heat-treated surviving microorganisms and/or post-process contamination during storage phase is also important to take into account. Secondly, mathematical equations are determined to estimate the change of microbial load after each processing step. This phase includes the construction of model inputs by collecting data or eliciting experts. Finally, the model outputs are obtained by simulation procedures, they have to be interpreted and communicated to targeted stakeholders. In this latter phase, tools such as what-if scenarios provide an essential added value. These different MRA phases are illustrated through two examples covering important issues in industry. The first one covers process optimization in a food safety context, the second one covers shelf-life determination in a food quality context. Although both contexts required the same methodology, they do not have the same endpoint: up to the human health in the foie gras case-study illustrating here a safety application, up to the food portion in the

76 FR 9027 - Draft Guidance for Industry and Food and Drug Administration Staff on Best Practices for...

Science.gov (United States)

2011-02-16

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-D-0057] Draft Guidance for Industry and Food and Drug Administration Staff on Best Practices for Conducting and...: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug Administration (FDA) is...

Industrial coal utilization

Energy Technology Data Exchange (ETDEWEB)

None

1979-01-01

The effects of the National Energy Act on the use of coal in US industrial and utility power plants are considered. Innovative methods of using coal in an environmentally acceptable way are discussed: furnace types, fluidized-bed combustion, coal-oil-mixtures, coal firing in kilns and combustion of synthetic gas and liquid fuels. Fuel use in various industries is discussed with trends brought about by uncertain availability and price of natural gas and fuel oils: steel, chemical, cement, pulp and paper, glass and bricks. The symposium on Industrial Coal Utilization was sponsored by the US DOE, Pittsburgh Energy Technology Center, April 3 to 4, 1979. Twenty-one papers have been entered individually into the EDB. (LTN)

Public information - the crucial element in nuclear power acceptance

International Nuclear Information System (INIS)

Hayes, R.; Middlemiss, N.

1996-01-01

The British nuclear industry approach to the public information is described as the crucial element in nuclear power acceptance. The industry need to be a reliable, trustworthy source of information. There is evidence that when issues are examined in court or in quasi-judicial contexts, the public gains a better appreciation of the issues. The media report both sides of debate more evenly. Therefore the best way to deal with the most hostile opposition may be to take into a legal framework, rather than engage in hand-to-hand battle

Public information - the crucial element in nuclear power acceptance

Energy Technology Data Exchange (ETDEWEB)

Hayes, R; Middlemiss, N [British Nuclear Industry Forum, London (United Kingdom)

1996-07-01

The British nuclear industry approach to the public information is described as the crucial element in nuclear power acceptance. The industry need to be a reliable, trustworthy source of information. There is evidence that when issues are examined in court or in quasi-judicial contexts, the public gains a better appreciation of the issues. The media report both sides of debate more evenly. Therefore the best way to deal with the most hostile opposition may be to take into a legal framework, rather than engage in hand-to-hand battle.

Health problems of industrial applications of radioisotopes

International Nuclear Information System (INIS)

Kudrna, J.

1976-01-01

Radiation hygiene problems of industrial radioisotope applications are discussed. The observance of regulations is emphasised. Radiation protection is based on the principle of preventing early radiation damage and limiting late radiation damage to an acceptable level. The basic requirement is that the cumulated dose should be as low as possible, i.e., as low as is practically feasible in considering economic and social aspects. Notices 59/72 and 65/72, Collection of Laws, rule that if the limit of 3/10 of the maximum permissible dose is likely to be reached, control zones should be defined and marked at places of work where radioisotopes are handled. The characteristics of such a control zone are listed and the measures to be taken in case of accident are outlined. (B.S.)

PVUSA procurement, acceptance, and rating practices for photovoltaic power plants

Energy Technology Data Exchange (ETDEWEB)

Dows, R.N.; Gough, E.J.

1995-09-01

This report is one in a series of PVUSA reports on PVUSA experiences and lessons learned at the demonstration sites in Davis and Kerman, California, and from participating utility host sites. During the course of approximately 7 years (1988--1994), 10 PV systems have been installed ranging from 20 kW to 500 kW. Six 20-kW emerging module technology arrays, five on universal project-provided structures and one turnkey concentrator, and four turnkey utility-scale systems (200 to 500 kW) were installed. PVUSA took a very proactive approach in the procurement of these systems. In the absence of established procurement documents, the project team developed a comprehensive set of technical and commercial documents. These have been updated with each successive procurement. Working closely with vendors after the award in a two-way exchange provided designs better suited for utility applications. This report discusses the PVUSA procurement process through testing and acceptance, and rating of PV turnkey systems. Special emphasis is placed on the acceptance testing and rating methodology which completes the procurement process by verifying that PV systems meet contract requirements. Lessons learned and recommendations are provided based on PVUSA experience.

Risk Perception and the Public Acceptance of Drones.

Science.gov (United States)

Clothier, Reece A; Greer, Dominique A; Greer, Duncan G; Mehta, Amisha M

2015-06-01

Unmanned aircraft, or drones, are a rapidly emerging sector of the aviation industry. There has been limited substantive research, however, into the public perception and acceptance of drones. This article presents the results from two surveys of the Australian public designed to investigate (1) whether the public perceive drones to be riskier than existing manned aviation, (2) whether the terminology used to describe the technology influences public perception, and (3) what the broader concerns are that may influence public acceptance of the technology. We find that the Australian public currently hold a relatively neutral attitude toward drones. Respondents did not consider the technology to be overly unsafe, risky, beneficial, or threatening. Drones are largely viewed as being of comparable risk to that of existing manned aviation. Furthermore, terminology had a minimal effect on the perception of the risks or acceptability of the technology. The neutral response is likely due to a lack of knowledge about the technology, which was also identified as the most prevalent public concern as opposed to the risks associated with its use. Privacy, military use, and misuse (e.g., terrorism) were also significant public concerns. The results suggest that society is yet to form an opinion of drones. As public knowledge increases, the current position is likely to change. Industry communication and media coverage will likely influence the ultimate position adopted by the public, which can be difficult to change once established. © 2014 Society for Risk Analysis.

Maintenance approaches and practices in selected foreign nuclear power programs and other US industries: Review and lessons learned

Energy Technology Data Exchange (ETDEWEB)

1990-04-01

The Commission published a Notice of Proposed Rule-making on Maintenance of Nuclear Power Plants on November 28, 1988, spelling out NRC's expectations in maintenance. In preparing the proposed rule, the NRC reviewed maintenance practices in other countries and considered maintenance approaches in other industries in this country. As a result of the review of maintenance practices, it was concluded that certain practices in the following areas have been found to contribute significantly to effective maintenance: (1) systems approach; (2) effectiveness monitoring; (3) technician qualifications and motivation; and (4) maintenance organization. 87 refs., 26 figs., 2 tabs.

Maintenance approaches and practices in selected foreign nuclear power programs and other US industries: Review and lessons learned

International Nuclear Information System (INIS)

1990-04-01

The Commission published a Notice of Proposed Rule-making on Maintenance of Nuclear Power Plants on November 28, 1988, spelling out NRC's expectations in maintenance. In preparing the proposed rule, the NRC reviewed maintenance practices in other countries and considered maintenance approaches in other industries in this country. As a result of the review of maintenance practices, it was concluded that certain practices in the following areas have been found to contribute significantly to effective maintenance: (1) systems approach; (2) effectiveness monitoring; (3) technician qualifications and motivation; and (4) maintenance organization. 87 refs., 26 figs., 2 tabs

Assessment of Energy-Saving Practices of the Hospitality Industry in Macau

Directory of Open Access Journals (Sweden)

Xu Wang

2018-01-01

Full Text Available Macau is building a world tourism and leisure center. In the context of flourishing hospitality development, energy issues have attracted more and more attention in recent years. On the basis of the field survey of 28 hotels, an evaluation index system is built to assess the status of energy-saving and environmental protection practices in the hospitality industry in Macau. This system is built by selecting some credits from Leadership in Energy and Environmental Design (LEED and adding several new indices according to the social and economic characteristics of Macau. The results show that the hotels have made significant efforts to improve the energy efficiency in recent years. A total of 71.4% of the hotels have formulated and implemented the energy-saving and environmental protection programs. However, there is an apparent gap in energy and environmental performance between different star-level hotels. The higher is the star-level of a hotel, the higher enthusiasm on energy-saving a hotel has, e.g., 63.6% of the 5-star hotels carried out the carbon auditing and energy management measures, but there is no 2-star hotel that adopted them. The energy-saving performance can be great improved if more efforts are made in the future, especially for the 2-star hotels. Finally, we put forward some suggestions for how to bridge this gap and present a possible roadmap for the further improvement of energy efficiency of the hotel industry in Macau. The results from this work are useful to help the government and hotel managers to take actions for improving the energy utilization and efficiency of the hospitality industry in Macau.

Responsability of nuclear industry

International Nuclear Information System (INIS)

Cadiz Deleito, J.C.

1985-01-01

Since the beginning of nuclear industry, civil responsibility with damages to the public health and properties was a critical problem, because the special conditions of this industry (nuclear accident, damages could be very high but probability of these events is very low). Legal precepts, universally accepted, in the first 60 years for all countries interested in nuclear energy are being revised, then 20 years of experience. The civil responsibility limited is being questioned and indemnities updated. (author)

Determinants of debit cards acceptance: An empirical investigation

International Nuclear Information System (INIS)

Ismail, Shafinar; Adnan, Azimah; Azizi, Amsyar; Bakri, Mohamed Hariri; Zulkepli, Jafri

2014-01-01

These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry

Determinants of debit cards acceptance: An empirical investigation

Energy Technology Data Exchange (ETDEWEB)

Ismail, Shafinar; Adnan, Azimah; Azizi, Amsyar [Faculty of Business and Management, Universiti Teknologi MARA, Melaka 75300 (Malaysia); Bakri, Mohamed Hariri [Faculty of Technology Management And Technopreneurship, Universiti Teknikal Malaysia, Melaka 76100 (Malaysia); Zulkepli, Jafri [Faculty of Quantitative Science, Universiti Utara Malaysia, Sintok Kedah (Malaysia)

2014-12-04

These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry.

Determinants of debit cards acceptance: An empirical investigation

Science.gov (United States)

Ismail, Shafinar; Bakri, Mohamed Hariri; Zulkepli, Jafri; Adnan, Azimah; Azizi, Amsyar

2014-12-01

These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry.

Den betingede accept

DEFF Research Database (Denmark)

Kolind, Torsten

1999-01-01

The article focus on aspects of identity and social order in relation to the interaction between ‘normals' and ex-prisoners, that is, ex-prisoners, who wants to live a normal life without criminality. It is argued, that this interaction and the normality that the ex-prisoner is granted often......, on the surface, can look rather unproblematic, but that it, none the less, is ruled by, what the author calls the conditioned accept. That is, the ex-prisoner should see himself as normal, at the same time that he withdraw from those situations, practices and attitude where the normals would have difficulties...

How can health care organisations make and justify decisions about risk reduction? Lessons from a cross-industry review and a health care stakeholder consensus development process

International Nuclear Information System (INIS)

Sujan, Mark A.; Habli, Ibrahim; Kelly, Tim P.; Gühnemann, Astrid; Pozzi, Simone; Johnson, Christopher W.

2017-01-01

Interventions to reduce risk often have an associated cost. In UK industries decisions about risk reduction are made and justified within a shared regulatory framework that requires that risk be reduced as low as reasonably practicable. In health care no such regulatory framework exists, and the practice of making decisions about risk reduction is varied and lacks transparency. Can health care organisations learn from relevant industry experiences about making and justifying risk reduction decisions? This paper presents lessons from a qualitative study undertaken with 21 participants from five industries about how such decisions are made and justified in UK industry. Recommendations were developed based on a consensus development exercise undertaken with 20 health care stakeholders. The paper argues that there is a need in health care to develop a regulatory framework and an agreed process for managing explicitly the trade-off between risk reduction and cost. The framework should include guidance about a health care specific notion of acceptable levels of risk, guidance about standardised risk reduction interventions, it should include regulatory incentives for health care organisations to reduce risk, and it should encourage the adoption of an approach for documenting explicitly an organisation's risk position. - Highlights: • Empirical description of industry perceptions on making risk reduction decisions. • Health care consensus development identified five recommendations. • Risk concept should be better integrated into safety management. • Education and awareness about risk concept are required. • Health systems need to start a dialogue about acceptable levels of risk.

Best practices for veterinary toxicologic clinical pathology, with emphasis on the pharmaceutical and biotechnology industries.

Science.gov (United States)

Tomlinson, Lindsay; Boone, Laura I; Ramaiah, Lila; Penraat, Kelley A; von Beust, Barbara R; Ameri, Mehrdad; Poitout-Belissent, Florence M; Weingand, Kurt; Workman, Heather C; Aulbach, Adam D; Meyer, Dennis J; Brown, Diane E; MacNeill, Amy L; Bolliger, Anne Provencher; Bounous, Denise I

2013-09-01

The purpose of this paper by the Regulatory Affairs Committee (RAC) of the American Society for Veterinary Clinical Pathology (ASVCP) is to review the current regulatory guidances (eg, guidelines) and published recommendations for best practices in veterinary toxicologic clinical pathology, particularly in the pharmaceutical and biotechnology industries, and to utilize the combined experience of ASVCP RAC to provide updated recommendations. Discussion points include (1) instrumentation, validation, and sample collection, (2) routine laboratory variables, (3) cytologic laboratory variables, (4) data interpretation and reporting (including peer review, reference intervals and statistics), and (5) roles and responsibilities of clinical pathologists and laboratory personnel. Revision and improvement of current practices should be in alignment with evolving regulatory guidance documents, new technology, and expanding understanding and utility of clinical pathology. These recommendations provide a contemporary guide for the refinement of veterinary toxicologic clinical pathology best practices. © 2013 American Society for Veterinary Clinical Pathology.

Standard practice for digital imaging and communication in nondestructive evaluation (DICONDE) for ultrasonic test methods

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This practice facilitates the interoperability of ultrasonic imaging equipment by specifying image data transfer and archival storage methods in commonly accepted terms. This document is intended to be used in conjunction with Practice E 2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E 2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, transfer and archival storage. The goal of Practice E 2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE test results on any system conforming to the DICONDE standard. Toward that end, Practice E 2339 provides a data dictionary and set of information modules that are applicable to all NDE modalities. This practice supplements Practice E 2339 by providing information object definitions, information ...

Skin protection in the food industry.

Science.gov (United States)

Bauer, A; Kelterer, D; Bartsch, R; Stadeler, M; Elsner, P

2007-01-01

In food occupations, like in many other skin risk occupations, the regular use of personal protection equipment, i.e. of skin protection ointments and protective gloves, is recommended as well as regular skin care for the prevention of occupational hand dermatitis. We investigated the uptake and maintenance of different prevention strategies (instructions for skin protection and skin care, prevocational skin hardening with UV light) in food occupations and their efficacy in the primary prevention of vocationally caused hand dermatitis. We could show that the acceptance and regular use of skin protection and care measures could be significantly increased by theoretical and practical instructions in food industry trainees. The highest acceptance was seen with skin protection ointment (100%) and skin care (90%). Protective gloves (43.3%) were used to a lesser extent. The hand dermatitis point prevalence in the groups after 6 months was 13.3% (skin protection), 19.4% (UV hardening) and 29.1% (controls). These clinical trends were supported by statistically significant differences in the basal TEWL values. Adequate skin protection and regular skin care seem to be promising for the prevention of occupationally caused hand dermatitis. The experimental approach using UV hardening prevocationally did not fulfil the expectations.

Entrepreneurship in Creative Industries

Directory of Open Access Journals (Sweden)

Jūratė Černevičiūtė

2011-10-01

Full Text Available Creative industries topic is closely related to the art markets in a variety of mediation forms. Traditional business entrepreneurship is risk-related activities implementing innovations in markets, and generating economic growth. The creative industry area has plenty of innovation, but its acceptance is more complex because of the cultural world’s participants’ agreements. Cultural world has its own social organization, associated with the mediation (including entrepreneurship types. The article examines the concept of entrepreneurship in the traditional business and creative industries and types of innovation and mediation (including entrepreneurship. The conclusion is that types of intermediary in creative industries depend on the cultural world’s social organization, and forms of mediation are more heterogeneous than in the traditional business. 

Marketing Violent Entertainment to Children: A Six-Month Follow-Up Review of Industry Practices in the Motion Picture, Music Recording & Electronic Game Industries. A Report to Congress.

Science.gov (United States)

Federal Trade Commission, Washington, DC.

In September 2000, the Federal Trade Commission issued a report on marketing violent entertainment to children. The Commission found that all three segments of the entertainment industry intentionally promoted products to children that warranted parental cautions. This report provides a look at the advertising practices to see if the industries…

Understanding consumers’ acceptance of mobile payments : a theoretical model and empirical validation

OpenAIRE

Chen, Jiajun

2007-01-01

This research investigates consumer acceptance of mobile payments. Mobile payments offer an alternative payment method for consumers, and allow consumers to make point-of-sales payments through mobile devices, such as mobile phones and Personal Digital Assistants (PDAs). It aims to present a better understanding of mobile payments, developing a consumer acceptance model for mobile payments. Moreover, it offers a reference and a source of literature for the industry and academic researchers in...

Computer integrated manufacturing in the chemical industry : Theory & practice

NARCIS (Netherlands)

Ashayeri, J.; Teelen, A.; Selen, W.J.

1995-01-01

This paper addresses the possibilities of implementing Computer Integrated Manufacturing in the process industry, and the chemical industry in particular. After presenting some distinct differences of the process industry in relation to discrete manufacturing, a number of focal points are discussed.

Practical Suggestions for Calculating Supercritical Water-Steam Properties

Energy Technology Data Exchange (ETDEWEB)

Kim, Seongil; Choi, Sangmin [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2016-12-15

A standard procedure for determining water-steam properties has been established through an international collaboration in addition to a domestic effort. The current accepted international standard for industrial application is based on the IAPWS-IF97 (International Association for the Properties of Water and Steam-Industrial Formation 97). Based on this standard, the ASME (American Society of Mechanical Engineers)/NIST (National Institute of Standard and Technology) developed the REPROP program in the USA, and the JSME (Japan Society of Mechanical Engineers) developed the steam table and calculation code. Upon applying this standard procedure, modified procedures were proposed for computational convenience, particularly in the supercritical pressure region where non-smooth variations of water-steam properties were distinctively observed. In this paper, the internationally adopted procedures and the progress of related activities are briefly summarized. Some practical considerations are presented for the efficient execution of computational code.

Construction mediation and its hybridization: the case of the Hong Kong construction industry

Directory of Open Access Journals (Sweden)

Ng Pui-Lam

2017-01-01

Full Text Available In view of the sophisticated nature of construction disputes, specialized dispute resolution mechanisms are of pivotal importance to the satisfactory settlement between disputing parties. Among the various construction dispute resolution mechanisms, mediation has been increasingly gaining recognition and acceptance. Its hybrid, namely mediation-arbitration (med-arb, has also emerged and has started receiving attention and appreciation. With special reference to the construction industry practice in Hong Kong, a commentary on the respective merits and demerits of construction mediation and construction med-arb, as well as the ways forward, are presented in this article.

Leadership styles in technology acceptance : do followers practice what leaders preach?

NARCIS (Netherlands)

Schepers, J.J.L.; Wetzels, M.G.M.; Ruyter, de J.C.

2005-01-01

Service firms recognize the need to introduce new technologies to stay in the market, or to retain their competitive advantage compared to their rivals. Introducing new technologies in an organization is by no means easy and poses many challenges like the acceptance and adoption of new technologies

Public acceptance activities by the Rokkasho project

International Nuclear Information System (INIS)

Ushida, Yasunori

1993-01-01

Japan Nuclear Fuel Limited, incorporated by mainly ten Japanese utilities, engages in constructing and operating nuclear fuel cycle facilities such as reprocessing, uranium enrichment and low level radioactive waste disposal at Rokkasho village in Aomori prefecture, 600 kilometers north of Tokyo, where is the most northern part of Honshu island. This presentation deals with the situation concerning the Rokkasho project and our public acceptance activities. The expansion of anti nuclear movement was spread not only Aomori prefecture but also all over Japan, affected strongly by the Chernobyl accident. In 1988,16 anti-nuclear groups including labor-union organized a committee for the purpose of a campaign to collect signatures for opposing nuclear fuel cycle facilities. Those groups brought in a lawsuit against the Japan Nuclear Fuel Limited, for stopping the construction of enrichment plant. Facing furious anti nuclear fuel cycle movements in Aomori prefecture, the Federation of Electric Power Companies decided to re strengthen the public acceptance activities and established the Nuclear Fuel Joint head office together with Japan Nuclear Fuel Service Co.and Japan Nuclear Fuel Industry Co. To this new organization many excellent members were dispatched from all electric power companies. The target area for public acceptance activities expanded from the surrounding area to all area of Aomori prefecture. The first policy of public acceptance activities is 'Appealing by face to face' which means the direct personal contact with people being anxious about nuclear fuel cycle facilities. The second main policy is 'Seeing the plant itself is better than persuading orally.' Survey conducted by a newspaper company in respect with the public acceptance of Rokkasho project in July 1989 July 1992 showed a favorable change of the public acceptance. However, one also has to recognize that most of people still have anxiety about the nuclear fuel cycle facilities and we shall

Acceptance Probability (P a) Analysis for Process Validation Lifecycle Stages.

Science.gov (United States)

Alsmeyer, Daniel; Pazhayattil, Ajay; Chen, Shu; Munaretto, Francesco; Hye, Maksuda; Sanghvi, Pradeep

2016-04-01

This paper introduces an innovative statistical approach towards understanding how variation impacts the acceptance criteria of quality attributes. Because of more complex stage-wise acceptance criteria, traditional process capability measures are inadequate for general application in the pharmaceutical industry. The probability of acceptance concept provides a clear measure, derived from specific acceptance criteria for each quality attribute. In line with the 2011 FDA Guidance, this approach systematically evaluates data and scientifically establishes evidence that a process is capable of consistently delivering quality product. The probability of acceptance provides a direct and readily understandable indication of product risk. As with traditional capability indices, the acceptance probability approach assumes that underlying data distributions are normal. The computational solutions for dosage uniformity and dissolution acceptance criteria are readily applicable. For dosage uniformity, the expected AV range may be determined using the s lo and s hi values along with the worst case estimates of the mean. This approach permits a risk-based assessment of future batch performance of the critical quality attributes. The concept is also readily applicable to sterile/non sterile liquid dose products. Quality attributes such as deliverable volume and assay per spray have stage-wise acceptance that can be converted into an acceptance probability. Accepted statistical guidelines indicate processes with C pk > 1.33 as performing well within statistical control and those with C pk  1.33 is associated with a centered process that will statistically produce less than 63 defective units per million. This is equivalent to an acceptance probability of >99.99%.

Exploring technology acceptance for mobile services

Directory of Open Access Journals (Sweden)

Kenny Phan

2011-07-01

Full Text Available Purpose: Mobile phone industries are no longer relying on voice services. It is predicted that data services are expected to be a remediation for the declining of average revenue per user (ARPU in telecommunication market. The purpose of this paper is to find the factors that influence the acceptance/adoption of mobile services.Design/methodology/approach: This paper utilizes quantitative method. Questionnaire were distributed to collect the data. The questionnaires are designed specifically to address the factors related to mobile services. Later on, this paper uses Analytical Hierarchical Process (AHP and Cluster analysis to identify the factors that influence the adoption of mobile services.Findings: The results show that ease of use and usefulness are top two factors that influence the adoption of mobile services.Research limitations/implications: The sample for the study is relatively small. For future research, the sample should be increased. The data collection should also look into different devices and operating system of mobile phones to find if there is any significant difference in adopting mobile services.Practical implications: This framework is expected to be able to help the mobile services provider to design better mobile services that can attract users to adopt them. Originality/value: This is the follow on research on the previous study that employed different method. This study is to confirm and support the findings from previous study.

Applying Social Capital Theory and the Technology Acceptance ...

African Journals Online (AJOL)

Applying Social Capital Theory and the Technology Acceptance Model in information and knowledge sharing research. ... Inkanyiso: Journal of Humanities and Social Sciences ... The paper explains the components, relevance and practical applicability of the two theories to information and knowledge sharing research.

Security of radioactive sources in industrial radiography

International Nuclear Information System (INIS)

Popp, Andrew; Murray, Allan

2010-01-01

This paper describes the need and new requirements to ensure the security of radioactive sources used in the practice of industrial radiography. We describe the discussions and issues arising during the september 2010 regional workshop held in Sydney on the application of security measures to industrial radiography practices. The workshop provided the perspectives of both radiation regulators and industry practitioners, including those from the Philippines. We describe the outputs of the workshop, and how they were developed, and make suggestions for further consideration and applications of security measures in the practice of industrial radiography. (author)

Shelf-life dating of shelf-stable strawberry juice based on survival analysis of consumer acceptance information.

Science.gov (United States)

Buvé, Carolien; Van Bedts, Tine; Haenen, Annelien; Kebede, Biniam; Braekers, Roel; Hendrickx, Marc; Van Loey, Ann; Grauwet, Tara

2018-07-01

Accurate shelf-life dating of food products is crucial for consumers and industries. Therefore, in this study we applied a science-based approach for shelf-life assessment, including accelerated shelf-life testing (ASLT), acceptability testing and the screening of analytical attributes for fast shelf-life predictions. Shelf-stable strawberry juice was selected as a case study. Ambient storage (20 °C) had no effect on the aroma-based acceptance of strawberry juice. The colour-based acceptability decreased during storage under ambient and accelerated (28-42 °C) conditions. The application of survival analysis showed that the colour-based shelf-life was reached in the early stages of storage (≤11 weeks) and that the shelf-life was shortened at higher temperatures. None of the selected attributes (a * and ΔE * value, anthocyanin and ascorbic acid content) is an ideal analytical marker for shelf-life predictions in the investigated temperature range (20-42 °C). Nevertheless, an overall analytical cut-off value over the whole temperature range can be selected. Colour changes of strawberry juice during storage are shelf-life limiting. Combining ASLT with acceptability testing allowed to gain faster insight into the change in colour-based acceptability and to perform shelf-life predictions relying on scientific data. An analytical marker is a convenient tool for shelf-life predictions in the context of ASLT. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Acceptance criteria for disposal of radioactive wastes in shallow ground and rock cavities

International Nuclear Information System (INIS)

1985-01-01

This document provides an overview of basic information related to waste acceptance criteria for disposal in shallow ground and rock cavity repositories, consisting of a discussion of acceptable waste types. The last item includes identification of those waste characteristics which may influence the performance of the disposal system and as such are areas of consideration for criteria development. The material is presented in a manner similar to a safety assessment. Waste acceptance criteria aimed at limiting the radiation exposure to acceptable levels are presented for each pathway. Radioactive wastes considered here are low-level radioactive wastes and intermediate-level radioactive wastes from nuclear fuel cycle operations and applications of radionuclides in research, medicine and industry

Best Practices in School-to-Careers: The Utilities Industry.

Science.gov (United States)

National Employer Leadership Council, Washington, DC.

This document highlights the school-to-careers (STC) partnerships connecting workplace experiences to classroom learning to prepare students for successful employment in the utilities industry. First, the current state of the utilities industry and careers in the utilities industry are reviewed. Next, the following organizations and employers are…

Social demographic and attitudinal determinants of consumer acceptance of food irradiation

International Nuclear Information System (INIS)

Sapp, S.G.; Harrod, W.J.; Zhao, L.J.

1995-01-01

The effects of eleven social demographic and attitudinal variables on four measures of acceptance of food irradiation were evaluated in a laboratory experiment. Subjects were presented with balanced information on food irradiation and allowed to discuss the process to simulate the effects of word-of-mouth on acceptance. Trust in government and industry was found to be the most important predictor of all four dependent variables, including participation on a taste panel for irradiated chicken meat. Implications of the findings for consumer education are presented

Perceptions and attitude effects on nanotechnology acceptance: an exploratory framework

International Nuclear Information System (INIS)

Ganesh Pillai, Rajani; Bezbaruah, Achintya N.

2017-01-01

Existing literature in people’s attitude toward nanotechnology and acceptance of nanotechnology applications has generally investigated the impact of factors at the individual or context levels. While this vast body of research is very informative, a comprehensive understanding of how attitude toward nanotechnology are formed and factors influencing the acceptance of nanotechnology are elusive. This paper proposes an exploratory nanotechnology perception-attitude-acceptance framework (Nano-PAAF) to build a systematic understanding of the phenomenon. The framework proposes that perceptions of risks and benefits of nanotechnology are influenced by cognitive, affective, and sociocultural factors. The sociodemographic factors of consumers and contextual factors mitigate the influence of cognitive, affective, and sociocultural factors on the perception of risks and benefits. The perceived risks and benefits in turn influence people’s attitude toward nanotechnology, which then influences acceptance of nanotechnology products. This framework will need further development over time to incorporate emerging knowledge and is expected to be useful for researchers, decision and policy makers, industry, and business entities.

Perceptions and attitude effects on nanotechnology acceptance: an exploratory framework

Energy Technology Data Exchange (ETDEWEB)

Ganesh Pillai, Rajani, E-mail: rajani.pillai@ndsu.edu [North Dakota State University, Department of Management and Marketing, College of Business (United States); Bezbaruah, Achintya N., E-mail: a.bezbaruah@ndsu.edu [North Dakota State University, Civil and Environmental Engineering (United States)

2017-02-15

Existing literature in people’s attitude toward nanotechnology and acceptance of nanotechnology applications has generally investigated the impact of factors at the individual or context levels. While this vast body of research is very informative, a comprehensive understanding of how attitude toward nanotechnology are formed and factors influencing the acceptance of nanotechnology are elusive. This paper proposes an exploratory nanotechnology perception-attitude-acceptance framework (Nano-PAAF) to build a systematic understanding of the phenomenon. The framework proposes that perceptions of risks and benefits of nanotechnology are influenced by cognitive, affective, and sociocultural factors. The sociodemographic factors of consumers and contextual factors mitigate the influence of cognitive, affective, and sociocultural factors on the perception of risks and benefits. The perceived risks and benefits in turn influence people’s attitude toward nanotechnology, which then influences acceptance of nanotechnology products. This framework will need further development over time to incorporate emerging knowledge and is expected to be useful for researchers, decision and policy makers, industry, and business entities.

Assessment of industrial liquid waste management in Omdurman Industrial Area

International Nuclear Information System (INIS)

Elnasri, R. A. A.

2003-04-01

This study was conducted mainly to investigate the effects of industrial liquid waste on the environment in the Omdurman area. Various types of industries are found around Omdurman. According to the ISC the major industries are divided into eight major sub-sectors, each sub-sector is divided into types of industries. Special consideration was given to the liquid waste because of its effects. In addition to the available data, personal observation supported by photographs, laboratory analyses were carried on the industrial effluents. The investigated parameters in the analysis were, BOD, COD, O and G, Cr, TDS, TSS, pH, temp and conductivity. Interviews were conducted with waste handling workers in the industries, in order to assess the effects of industrial pollution. The results obtained showed that pollutants produced by all the factories were found to exceed the accepted levels of the industrial pollution control. The effluents disposed of in the sites allotted by municipal authorities have adverse effects on the surrounding environment and public health and amenities. Accordingly the study recommends that the waste water must be pretreated before being disposed of in site allotted by municipal authorities. Develop an appropriate system for industrial waste proper management. The study established the need to construct a sewage system in the area in order to minimize the pollutants from effluents. (Author)

Assessment of industrial liquid waste management in Omdurman Industrial Area

Energy Technology Data Exchange (ETDEWEB)

Elnasri, R A. A. [Institute of Environmental Studies, University of Khartoum, Khartoum (Sudan)

2003-04-15

This study was conducted mainly to investigate the effects of industrial liquid waste on the environment in the Omdurman area. Various types of industries are found around Omdurman. According to the ISC the major industries are divided into eight major sub-sectors, each sub-sector is divided into types of industries. Special consideration was given to the liquid waste because of its effects. In addition to the available data, personal observation supported by photographs, laboratory analyses were carried on the industrial effluents. The investigated parameters in the analysis were, BOD, COD, O and G, Cr, TDS, TSS, pH, temp and conductivity. Interviews were conducted with waste handling workers in the industries, in order to assess the effects of industrial pollution. The results obtained showed that pollutants produced by all the factories were found to exceed the accepted levels of the industrial pollution control. The effluents disposed of in the sites allotted by municipal authorities have adverse effects on the surrounding environment and public health and amenities. Accordingly the study recommends that the waste water must be pretreated before being disposed of in site allotted by municipal authorities. Develop an appropriate system for industrial waste proper management. The study established the need to construct a sewage system in the area in order to minimize the pollutants from effluents. (Author)

Full Employment in Industrialized Countries.

Science.gov (United States)

Britton, Andrew

1997-01-01

Argues that full employment must be acceptable on both social and economic grounds. Examines profound changes in industrialized economies since the 1970s and the diversity of employment contracts. Suggests that difficult policy decisions surround full employment. (SK)

Ability of Cu2+-montmorillonite to accept an toxic pollutants

International Nuclear Information System (INIS)

Janikova, V.; Jona, E.; Janik, R.; Pavlik, V.

2015-01-01

It is global problem that toxic pollutants are in the permanent contact to people through soil and water. Nowadays, it is important to eliminate these pollutants for future generations and to keep environment in the health condition. In relation to this article, aromatic organic compounds like benzene, phenol and aniline were chosen. These are used in various branches of industry, mainly in rubber industry or for production of dyes and in addition, phenol is commonly used in cosmetics or in food industry. Montmorillonite is clay mineral consisting of 2:1 sheets (tetrahedral:octahedral) and interlayer space where exchangeable cations and water molecules are present. Due to its structure, montmorillonite is able to accept some compounds or pollutants. This is the reason why it is mainly used as the covering material of radioactive waste in order to remove toxic pollutants. For investigation of toxic pollutants removing, XRD powder diffraction, infrared spectroscopy and thermal analysis were used. Our results show that Cu 2+ -montmorillonite is able to accept toxic benzene ring-based pollutants into interlayer. This mentioned ability can be proven on the basis of the investigation results relating to difference of interlayer distance, typical frequencies of -OH group or -NH 2 group, while these results were supplemented by thermal properties. (authors)

Process heat applications of HTR-PM600 in Chinese petrochemical industry: Preliminary study of adaptability and economy

International Nuclear Information System (INIS)

Fang, Chao; Min, Qi; Yang, Yanran; Sun, Yuliang

2017-01-01

Highlights: •High Temperature Gas Cooled Reactor (HTGR) could work as heat source for petrochemical industry. •The joint of a 600 MW modular HTGR (HTR-PM600) and petrochemical industry is achievable. •The mature technology of turbine in thermal power station could be readily adopted. •The economy of this scheme is also acceptable. -- Abstract: High Temperature Gas Cooled Reactor (HTGR) could work as heat source for petrochemical industry. In this article, the preliminary feasibility of a 600 MW modular HTGR (HTR-PM600) working as heat source for a typical hypothetical Chinese petrochemical factory is discussed and it is found that the joint of HTR-PM600 and petrochemical industry is achievable. In detail, the heat and water balance analysis of the petrochemical factory is given. Furthermore, the direct cost of heat supplied by HTR-PM600 is calculated and corresponding economy is estimated. The results show that though there are several challenges, the application of process heat of HTGR to petrochemical industry is practical in sense of both technology and economy.

Industry Study, Environment Industry, Spring 2009

Science.gov (United States)

2009-01-01

practices. For example, the cruising sector of the tourism industry has widely- acknowledged negative environmental impacts (carbon emissions and ocean...Services: An Industry Analysis ,” (2009): 4. http://www.berr.gov.uk/files/file50253.pdf 18 Ibid., 5. 19 EBI, 21 20 Department for Business...Ibid., 26. 50 DataMonitor Country Analysis Report, “Korea: In-Depth PESTLE Insights,” (June 2008): 4. 51 EBI, “3000,” 1-22. 52 Ibid., 5-130, 5

The discourse of "social licence to operate": case study of the Australian wind industry

Directory of Open Access Journals (Sweden)

Nina L. Hall

2014-12-01

Full Text Available Social Licence to Operate is a concept from the mining industry that reflects the ongoing acceptance or approval for a development granted by local stakeholders. It is now being applied by wind farm developers. Using the Australian wind industry as a case study, this discourse analysis examined how Social Licence to Operate is perceived and operationalised, and the key themes in this conceptual and applied discourse. Discourse analysis acknowledges that language choices are not accidental and discourse reflects power relationships. The wind industry representatives interviewed considered power over the Social Licence to Operate was shared with community stakeholders. They recognised the stakeholders' power to delay or prevent projects, but rejected the notion that every stakeholder group should have veto power. Social Licence to Operate is seen by the wind industry through a business-oriented perspective, with an emphasis on business risk, and they describe the opposition to wind farms by invoking a metaphor of "battle". The industry respondents described Social Licence to Operate as incorporating the values of trust, transparency and participation—which all contribute to creating "authentic" relationships. These findings can inform Social Licence to Operate research, engagement practices, and also encourage reflection by industry representatives on their implicit intentions for stakeholder engagement.

17th Online World Conference on Soft Computing in Industrial Applications

CERN Document Server

Krömer, Pavel; Köppen, Mario; Schaefer, Gerald

2014-01-01

This volume of Advances in Intelligent Systems and Computing contains accepted papers presented at WSC17, the 17th Online World Conference on Soft Computing in Industrial Applications, held from December 2012 to January 2013 on the Internet. WSC17 continues a successful series of scientific events started over a decade ago by the World Federation of Soft Computing. It brought together researchers from over the world interested in the ever advancing state of the art in the field. Continuous technological improvements make this online forum a viable gathering format for a world class conference. The aim of WSC17 was to disseminate excellent research results and contribute to building a global network of scientists interested in both theoretical foundations and practical applications of soft computing.   The 2012 edition of the Online World Conference on Soft Computing in Industrial Applications consisted of general track and special session on Continuous Features Discretization for Anomaly Intrusion Detectors...

Mindfulness-based and acceptance-based interventions in sport and performance contexts.

Science.gov (United States)

Gardner, Frank L; Moore, Zella E

2017-08-01

Since mindfulness-based and acceptance-based practice models were first conceptualized and applied in sport in an attempt to enhance performance and overall well-being of athletes and performers, these state-of-the-art theoretical and practice models have substantially broadened our knowledge base and have been successfully incorporated into sport and performance practice domains worldwide. Evolving from a sound empirical foundation, mindfulness-based and acceptance-based models in sport psychology have accumulated a strong basic and applied empirical foundation. In the nearly 20 years since their incorporation in the context of sport, empirical findings have demonstrated efficacious outcomes associated with performance and personal well-being, as well as supported their theorized mechanisms of change. Particularly as sport and performance environments increasingly call upon practitioners to provide more comprehensive care to clientele, including a range of care from performance enhancement and maintenance, to general personal well-being, to subclinical and clinical issues, mindfulness-based and acceptance-based practitioners have the tools to offer robust, empirically informed interventions that can enhance skills and quality of life, and/or ameliorate personal struggles. Copyright © 2017 Elsevier Ltd. All rights reserved.

Influence of the Human Resources Practices on the Employees Attachment. Empirical Study within the Companies in the Processing Industry

Directory of Open Access Journals (Sweden)

Liviu ILIES

2017-12-01

Full Text Available The purpose of this study is to show a series of results obtained during a research whose objective was the elaboration of an analysis and assessment model of human resources management practices in order to identify the factors that determine the performance of the management system for the purpose of perfecting it, within the organizations in the processing industry in Romania. The study aims to show the importance of the influence that the human resources practices have on the employees attachment towards the organizations they are a part of. The research has as base quantitative methods of analysis, therefore, as a tool for gathering data was used the survey based on questionnaire, composed of sets of simple questions, using a measurement scale of the agreement of Likert type, from 1 to 5 (1 = total disagreement - 5 = total agreement. The study is based on questioning a number of 463 employees within 27 companies in the processing industry in Romania. Among the main conclusions obtained, we mention that, the perception of the questioned employees on the human resources practices within the analyzed organizations is relatively good, respectively the attachment of the employees towards the organizations is also relatively good. We have identified that there is a strong and positive association between the human resources practices and the employees attachment, therefore, the organizations questioned need to make efforts in order to improve the human resources practices for consolidating the employees attachment.

The dairy industry: a brief description of production practices, trends, and farm characteristics around the world.

Science.gov (United States)

Douphrate, David I; Hagevoort, G Robert; Nonnenmann, Matthew W; Lunner Kolstrup, Christina; Reynolds, Stephen J; Jakob, Martina; Kinsel, Mark

2013-01-01

The global dairy industry is composed of a multitude of countries with unique production practices and consumer markets. The global average number of cows per farm is about 1-2 cows; however, as a farm business model transitions from sustenance to market production, the average herd size, and subsequent labor force increases. Dairy production is unique as an agricultural commodity because milk is produced daily, for 365 days per year. With the introduction of new technology such as the milking parlor, the global industry trend is one of increasing farm sizes. The farm sizes are the largest in the United States; however, the European Union produces the most milk compared with other global producers. Dairy production is essential for economic development and sustainable communities in rural areas. However, the required capital investment and availability of local markets and labor are continued challenges. Due to farm expansion, international producers are faced with new challenges related to assuring food safety and a safe working environment for their workforce. These challenges exist in addition to the cultural and language barriers related to an increasing dependence on immigrant labor in many regions of the world. Continued success of the global dairy industry is vital. Therefore, research should continue to address the identification of occupational risk factors associated with injuries and illnesses, as well as develop cost-effective interventions and practices that lead to the minimization or elimination of these injuries and illnesses on a global scale, among our valuable population of dairy producers and workers.

Public perception and acceptance on nuclear energy in China from questionnaire and education

International Nuclear Information System (INIS)

Zhou Yangping; Zhang Zuoyi; Ma Yanxiu; Shi Zhengang; Liu Changxin

2010-01-01

China's nuclear industry is recently experiencing rapid development, creating a need for research into public perceptions and acceptance of nuclear power. In this paper, we propose a strategy for investigating public perception and acceptance in China, in a continuous and accurate way, and testing the effectiveness of public education in order to find a proper way to improve the perception and acceptance of nuclear energy in China. Questionnaires are conducted separately both before and after public education activities on nuclear energy held in Beijing. Some conclusions and future continuation of this study are also discussed. (author)

Beyond knowledge transfer: The social construction of autonomous academic science in university-industry agricultural biotechnology research collaborations

Science.gov (United States)

Biscotti, Dina Louise

Autonomy is a social product. Although some might view autonomy as the absence of social interference in individual action, it is in fact produced through social institutions. It enables social actors to act; it is the justification for the allocation of enormous public resources into institutions classified as "public" or "nonprofit;" it can lead to innovation; and, significantly, it is key to the public acceptance of new technologies. In this dissertation, I analyze the social construction of autonomy for academic science in U.S. university-industry agricultural biotechnology research collaborations. University-industry relationships (UIRs) are a site of concern about the influence of commercial interests on academic science. Agricultural biotechnology is a contentious technology that has prompted questions about the ecological and public health implications of genetically-modified plants and animals. It has also spurred awareness of the industrialization of agriculture and accelerating corporate control of the global food system. Through analysis of in-depth interviews with over 200 scientists and administrators from nine U.S. research universities and thirty agricultural biotechnology companies, I find that both the academy and industry have a vested interest in the social construction of the academy as an autonomous space from which claims to objective, disinterested scientific knowledge can be made. These claims influence government regulation, as well as grower and public acceptance of agricultural biotechnology products. I argue that the social production of autonomy for academic science can be observed in narratives and practices related to: (1) the framing of when, how and why academic scientists collaborate with industry, (2) the meanings ascribed to and the uses deemed appropriate for industry monies in academic research, and (3) the dissemination of research results into the public domain through publications and patents. These narratives and practices

Waste Management in Industrial Construction: Investigating Contributions from Industrial Ecology

OpenAIRE

Larissa A. R. U. Freitas; Alessandra Magrini

2017-01-01

The need for effective construction waste management is growing in importance, due to the increasing generation of construction waste and to its adverse impacts on the environment. However, despite the numerous studies on construction waste management, recovery of construction waste through Industrial Symbiosis and the adoption of other inter-firm practices, comprised within Industrial Ecology field of study, have not been fully explored. The present research aims to investigate Industrial Ec...

Standard practice for digital imaging and communication nondestructive evaluation (DICONDE) for computed radiography (CR) test methods

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice facilitates the interoperability of computed radiography (CR) imaging and data acquisition equipment by specifying image data transfer and archival storage methods in commonly accepted terms. This practice is intended to be used in conjunction with Practice E2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, storage and archival storage. The goal of Practice E2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE results on any system conforming to the DICONDE standard. Toward that end, Practice E2339 provides a data dictionary and a set of information modules that are applicable to all NDE modalities. This practice supplements Practice E2339 by providing information objec...

The Case for Family-Friendly Work Practices in the Australian Construction Industry

Directory of Open Access Journals (Sweden)

Valerie Francis

2012-11-01

Full Text Available Although significant changes at the social, demographic, technological and workforce levelshave transformed the relationship between family and work, these changes have notbeen reflected in the employment practices of many construction companies. Many of thejob and organisational factors found to be negatively associated with family functioning arepertinent to construction professionals. Staff are expected to work long hours in demandingroles and this, combined with job insecurity and frequent relocation, means that familylife and individual well-being can be compromised. A growing body of research has foundthat the implementation of family-friendly work policies and practices can lead to greaterproductivity, lower attrition rates and higher morale in the workplace. In addition providinga work environment that is supportive of workers' family roles can help to alleviate workrelatedmental health problems.This paper outlines the changing demographic trends and societal attitudes that are makingindividuals and organisations question current work cultures and structures. Optionsfor making the construction industry a more family-friendly work environment are considered.All professionals, regardless of their age, gender and family responsibilities, canbenefit from these initiatives. The paper concludes by discussing the implications of theseissues for construction companies and future research work.

STRATEGIC HUMAN RESOURCE MANAGEMENT PRACTICES AND ITS IMPACT ON WORK LIFE BALANCE OF EMPLOYEES OF AUTOMOBILE INDUSTRY IN PUNE REGION

OpenAIRE

Dr. K. Ramamurthi; Mr. Lambodar Saha

2017-01-01

Various strategic practices have already been established to promote the value of Human Resource Management in organizations. The Human Resource Management function is now considered as a strategic tool in the formulation and implementation of organizational strategies to attain its objectives. Automobile Industries are chosen as subjects for this study with specific aspects relating to various strategic human resource management practices and its impact on work-life balance and to determine ...

Public perception and attitude towards chemical industry park in Dalian, Bohai Rim.

Science.gov (United States)

He, Guizhen; Chen, Chunci; Zhang, Lei; Lu, Yonglong

2018-04-01

Recent decade has witnessed accelerating expansion of chemical industry and increasing conflicts between the local citizens, governmental authorities and project developers, especially in some coastal and port cities in China. Development and transformation of chemical industrial parks has been adopted as a national initiative recently. However, there is a paucity of research examining public perspectives on chemical industrial parks and their risks. Aiming to understand public perception, attitude, and response and the factors underlying the support/acceptance of chemical industry park, this paper investigated 418 residents neighboring to two chemical industrial parks, Dalian in Bohai Rim through face-to-face questionnaire survey. The results showed the knowledge of the respondents on the chemical industrial parks development was very limited. The respondents had complex perceptions on the environmental impacts, risks control, social-economic benefits, and problem awareness. The current levels of information disclosure and public participation were very low. The central governmental official (44.3%) was the most trustworthy group by the respondents. Only 5.5% and 23.2% of the respondents supported the construction of a new CIP nearby and far away their homes, whilst 13% thought new CIP project as acceptable. The spearman correlation analysis results showed a strong NIMBY effect (Not In My Backyard). Factor analysis results demonstrated five latent factors: knowledge, benefit, information, trust, and participation. Multiple linear regression analysis indicated how socio-demographic differences and five latent factors might impact on the support/acceptance of the chemical industrial parks. Education level, trust, information, and participation were significant predictors of public support/acceptance level. This study contributes to our limited knowledge and understanding of public sentiments to the chemical industry parks in China. Copyright © 2017 Elsevier Ltd

PDA survey of quality risk management practices in the pharmaceutical, devices, & biotechnology industries.

Science.gov (United States)

Ahmed, Ruhi; Baseman, Harold; Ferreira, Jorge; Genova, Thomas; Harclerode, William; Hartman, Jeffery; Kim, Samuel; Londeree, Nanette; Long, Michael; Miele, William; Ramjit, Timothy; Raschiatore, Marlene; Tomonto, Charles

2008-01-01

In July 2006 the Parenteral Drug Association's Risk Management Task Force for Aseptic Processes, conducted an electronic survey of PDA members to determine current industry practices regarding implementation of Quality Risk Management in their organizations. This electronic survey was open and publicly available via the PDA website and targeted professionals in our industry who are involved in initiating, implementing, or reviewing risk management programs or decisions in their organizations. One hundred twenty-nine members participated and their demographics are presented in the sidebar "Correspondents Profile". Among the major findings are: *The "Aseptic Processing/Filling" operation is the functional area identified as having the greatest need for risk assessment and quality risk management. *The most widely used methodology in industry to identify risk is Failure Mode and Effects Analysis (FMEA). This tool was most widely applied in assessing change control and for adverse event, complaint, or failure investigations. *Despite the fact that personnel training was identified as the strategy most used for controlling/minimizing risk, the largest contributors to sterility failure in operations are still "Personnel". *Most companies still rely on "Manufacturing Controls" to mitigate risk and deemed the utilization of Process Analytical Technology (PAT) least important in this aspect. *A majority of correspondents verified that they did not periodically assess their risk management programs. *A majority of the correspondents desired to see case studies or examples of risk analysis implementation (as applicable to aseptic processing) in future PDA technical reports on risk management.

Radiation in the human environment: health effects, safety and acceptability

International Nuclear Information System (INIS)

Gonzalez, A.J.; Anderer, J.

1990-01-01

This paper reports selectively on three other aspects of radiation (used throughout to mean ionizing radiation) in the human environment: the human health effects of radiation, radiation safety policy and practices, and the acceptability of scientifically justified practices involving radiation exposures. Our argument is that the science of radiation biology, the judgemental techniques of radiation safety, and the social domain of radiation acceptability express different types of expertise that should complement - and not conflict with or substitute for - one another. Unfortunately, communication problems have arisen among these three communities and even between the various disciplines represented within a community. These problems have contributed greatly to the misperceptions many people have about radiation and which are frustrating a constructive dialogue on how radiation can be harnessed to benefit mankind. Our analysis seeks to assist those looking for a strategic perspective from which to reflect on their interaction with practices involving radiation exposures. (author)

Quest for public acceptance of nuclear power

International Nuclear Information System (INIS)

Hill, J.

1979-01-01

The nuclear industry cannot progress any faster than public opinion will allow, the author contends. This is true of any new technology. The degree of disadvantage that any society will accept in new developments clearly depends on the needs of the society and the urgency of the situation. Nobody wants a lower standard of living. An assessment is made of the people who are apprehensive about nuclear power and those who are not. Of those working in the industry, the majority are completely satisfied about what they are doing; they are working in the industry by choice. These people trust and respect the engineers and scientists directing the installation. Opponents of nuclear power are the people objecting to having a nuclear plant or any other large factory near their home. Many people technically less informed are also among the dissenters; information distributed by the media does not include all the correct facts or do not make a fair presentation of the facts. The author cites hurdles that other industries have had to conquer to succeed. In spite of the criticism leveled at nuclear power, he sees it as the salvation of our prosperous and, on the whole, enjoyable industrial society. He sees steady progress with the efficiency of processes increasing year by year. He foresees further setbacks and disappointments but feels that, finally, the industry will be judged on the facts and on its achievements

A practical method for the maintainability assessment in industrial devices using indicators and specific attributes

International Nuclear Information System (INIS)

Moreu De Leon, Pedro; González-Prida Díaz, Vicente; Barberá Martínez, Luis; Crespo Márquez, Adolfo

2012-01-01

The objective of this paper is to describe a procedure to obtain maintainability indicators for industrial devices. This analysis can be helpful, among other cases, to compare systems, to achieve a better design regarding maintainability requirements, to improve this maintainability under specific industrial environment and to foresee maintainability problems due to eventual changes in a device operation conditions. This maintainability assessment can be carried out at any stage of the industrial asset life cycle. With this purpose, this work first introduces the notion of maintainability and the implementation of assessment indicators, including some important requirements to perform that. Then, a brief literature review is presented, including the definition of the main concepts, which are later used in the paper. After studying the maintenance levels and the maintainability attributes, both terms are linked, leading all this analysis to the assessment of the maintainability indicators. It follows a discussion about the information obtained through the maintainability assessment process and its computation into several maintainability indicators. The paper includes a case study, which implements the defined assessment into a practical scenario. Finally, the work concludes summarizing the more significant aspects and suggesting future researches.

Using Project Performance to Measure Effectiveness of Quality Management System Maintenance and Practices in Construction Industry

OpenAIRE

Tiong Kung Leong; Norhayati Zakuan; Muhamad Zameri Mat Saman; Mohd. Shoki Md. Ariff; Choy Soon Tan

2014-01-01

This paper proposed seven existing and new performance indicators to measure the effectiveness of quality management system (QMS) maintenance and practices in construction industry. This research is carried out with a questionnaire based on QMS variables which are extracted from literature review and project performance indicators which are established from project management's theory. Data collected was analyzed using correlation and regression analysis. The findings indicate that client sat...

Knowledge, attitudes and practices of traceability among livestock traders in south-western Nigeria: implications for sustainable livestock industry.

Science.gov (United States)

Adesokan, Hezekiah K; Ocheja, Samuel E

2014-01-01

Livestock diseases and other animal health events are a threat to achieving sustainable livestock industry. The knowledge of trace-back and the practice of providing feedback on diseases encountered in slaughtered animals from the abattoir to the farm can help limit the spread as well as manage potential future incidents of such diseases. We assessed the knowledge, attitudes and practices of 200 willing livestock traders on traceability in Bodija Municipal Abattoir, south-western Nigeria. The results reveal that the majority of these traders had poor knowledge (79.5 %) and practices (74.0 %) of traceability, though 89.5 % demonstrated good attitudes. While 22.9 % knew that traceability could be an effective means to control diseases, only a lower proportion (9.0 %) knew the health status of the animals being purchased. Though 29.0 % reported the diseases encountered in their animals during slaughter to the farm, only 9.5 % followed up to ensure the farmers take steps at preventing further occurrence of the reported diseases. While age (p = 0.000; 0.014) and education (p = 0.000; 0.000) were both significant for good knowledge and attitudes, frequency of condemned cases (p = 0.000) and length of years in the trade (p = 0.004) were, respectively, significant for good knowledge and attitudes with none associated with practice. These poor levels of knowledge and practices of traceability are a threat to sustainable livestock industry, food security and human health; hence, there is an urgent need to institute national feedback mechanism on slaughtered animals in order to strengthen interventions against diseases at farm levels.

Meditation experts try Virtual Reality Mindfulness: A pilot study evaluation of the feasibility and acceptability of Virtual Reality to facilitate mindfulness practice in people attending a Mindfulness conference.

Science.gov (United States)

Navarro-Haro, María V; López-Del-Hoyo, Yolanda; Campos, Daniel; Linehan, Marsha M; Hoffman, Hunter G; García-Palacios, Azucena; Modrego-Alarcón, Marta; Borao, Luis; García-Campayo, Javier

2017-01-01

Regular mindfulness practice benefits people both mentally and physically, but many populations who could benefit do not practice mindfulness. Virtual Reality (VR) is a new technology that helps capture participants' attention and gives users the illusion of "being there" in the 3D computer generated environment, facilitating sense of presence. By limiting distractions from the real world, increasing sense of presence and giving people an interesting place to go to practice mindfulness, Virtual Reality may facilitate mindfulness practice. Traditional Dialectical Behavioral Therapy (DBT®) mindfulness skills training was specifically designed for clinical treatment of people who have trouble focusing attention, however severe patients often show difficulties or lack of motivation to practice mindfulness during the training. The present pilot study explored whether a sample of mindfulness experts would find useful and recommend a new VR Dialectical Behavioral Therapy (DBT®) mindfulness skills training technique and whether they would show any benefit. Forty four participants attending a mindfulness conference put on an Oculus Rift DK2 Virtual Reality helmet and floated down a calm 3D computer generated virtual river while listening to digitized DBT® mindfulness skills training instructions. On subjective questionnaires completed by the participants before and after the VR DBT® mindfulness skills training session, participants reported increases/improvements in state of mindfulness, and reductions in negative emotional states. After VR, participants reported significantly less sadness, anger, and anxiety, and reported being significantly more relaxed. Participants reported a moderate to strong illusion of going inside the 3D computer generated world (i.e., moderate to high "presence" in VR) and showed high acceptance of VR as a technique to practice mindfulness. These results show encouraging preliminary evidence of the feasibility and acceptability of using VR to

Protection of confidential information and countermeasures against insider threat in nuclear industry. Some practices in U.S. nuclear industry and their implication for Japan

International Nuclear Information System (INIS)

Tanabe, Tomoyuki

2008-01-01

In Japan, after law amendment of the Law for the Regulation of Nuclear Source Material, Nuclear Fuel Material and Reactors was implemented aiming for reinforcement of physical protection in 2005, there still remain a number of practical issues of how the nuclear administration applies the regulations in detail and how nuclear undertakers cope with the regulations. This report looks at how protection of confidential information and countermeasures against insider threat are regulated and handled in the United States civil nuclear energy industry, and extracts its implications for Japanese regulations and practical business affairs. This report points our four characteristics of protection of confidential information and countermeasures against insider threat in the United States commercial power industry: (1) regulatory contents are prescribed in detail within a specific scope, (2) private bureaucracy such as NEI provides support of compliance programs of nuclear undertakers, (3) strict protection and management system about Safeguards Information (SGI) has been developed in both sides of regulations and compliance programs, and (4) employee private information of a broad content including sensitive data such as financial status or the criminal record is acquired and used at the aim of security clearance by nuclear undertakers. These characteristics, especially point (2) serve as a reference in regulation enforcement in Japan while careful attentions should be paid in harmonizing with existing legislation. (author)

Relationship Between Consumer Acceptability and Pungency-Related Flavor Compounds of Vidalia Onions.

Science.gov (United States)

Kim, Ha-Yeon; Jackson, Daniel; Adhikari, Koushik; Riner, Cliff; Sanchez-Brambila, Gabriela

2017-10-01

A consumer study was conducted to evaluate preferences in Vidalia onions, and define consumer acceptability thresholds for commonly analyzed flavor compounds associated with pungency. Two varieties of Vidalia onions (Plethora and Sapelo Sweet) were grown at 3 fertilizer application rates (37.5 and 0; 134.5 and 59.4; and 190 and 118.8 kg/ha of nitrogen and sulfur, respectively), creating 6 treatments with various flavor attributes to use in the study. Bulb soluble solids, sugars, pyruvic acid, lachrymatory factor (LF; propanethial S-oxide), and methyl thiosulfinate (MT) content were determined and compared to sensory responses for overall liking, intensity of the sharp/pungent/burning sensation (SPB), and intent to buy provided by 142 consumers. Onion pyruvate, LF, MT, and sugar content increased as fertilization rate increased, regardless of onion variety. Consumer responses showed participants preferred onions with low SPB, which correlated positively to lower pyruvate, LF and MT concentrations, but showed no relationship to total sugars in the onion bulb. Regression analyses revealed that the majority of consumers (≥55%) found the flavor of Vidalia onions acceptable when the concentrations of LF, pyruvic acid, and MT within the bulbs were below 2.21, 4.83, and 0.43 nmol/mL, respectively. These values will support future studies aimed at identifying the optimal cultivation practices for production of sweet Vidalia onions, and can serve as an industry benchmark for quality control, thus ensuring the flavor of Vidalia onions will be acceptable to the majority of consumers. This study identified the relationship between consumer preferences and commonly analyzed flavor compounds in Vidalia onions, and established thresholds for these compounds at concentrations which the majority of consumers will find desirable. These relationships and thresholds will support future research investigating how cultural practices impact onion quality, and can be used to assist

Public attitudes towards industrial, work-related and other risks

International Nuclear Information System (INIS)

Prescott-Clarke, P.

1982-01-01

Two reports describing work sponsored by the Health and Safety Executive are presented. The first describes a study of public attitudes towards industrial, work related, nuclear industry related and other risks. The second report describes public attitudes towards the acceptability of risks. (U.K.)

BUSINESS ACCEPTANCE OF INFORMATION AND COMMUNICATION TECHNOLOGIES: AN STUDY OF THE SERVICE SECTOR

Directory of Open Access Journals (Sweden)

Maria José Martín De Hoyos

2007-05-01

Full Text Available The aim of this paper is to analyse the level of development reached by some Information and Communication Technologies (ICT such as web pages, e-mail, EDI, and business management software in the business world. To this end, we have concentrated on the business behaviour of the service sector. Nevertheless, the technological development demanded changes depending on the activity of the firm, so the mediator effect of the industry has been tested in the process of acceptance of innovations. Our results show the technology acceptance process is influenced by the perception of both the usefulness and the ease of use of such innovation. Moreover, the industry effect mediates the technological behaviour of the firm; meanwhile, if the firms performs a “traditional activity”, there are less incentives to implement the innovation.

The Negro in the Furniture Industry. The Racial Policies of American Industry Series.

Science.gov (United States)

Fulmer, William E.

This is the twenty-eighth of a series of studies conducted to determine variances in industrial employment practices of Negroes and to develop appropriate hiring policies. This particular study sought to examine current racial employment policies in the furniture industry within the context of the industry's structure and history. Interviews with…

Workplace Learning in the New Zealand Apple Industry Network: A New Co-Design Method for Government "Practice Making"

Science.gov (United States)

Hill, Roberta; Capper, Phillip; Wilson, Ken; Whatman, Richard; Wong, Karen

2007-01-01

Purpose: The purpose of this paper is to describe how, from 2004-2006, a New Zealand research team experimented with the "change laboratory" learning process to create a new method of government policy development and implementation, referred to as "practice-making". The apple industry in Hawke's Bay was chosen because of the…

When is a threat only an acceptable risk

International Nuclear Information System (INIS)

White, D.

1983-01-01

The government has accepted the report 'Lead in the Environment' by the Royal Commission on Environmental Pollution which recommends the introduction of lead-free petrol. This acceptance is discussed in the context of how changes in policy on pollution legislation come about. It seems that broad changes in social attitudes are needed. Most changes start as environmental scares some of which capture public imagination, others do not. Scientists are a major influence on scares - some are ignored, others, where the risks may be less, are overplayed. Scares tend to follow a predictable pattern. The economic and social histories of some changes are presented - clean air, blue asbestos, the use of aerosols, fluoride in water, nuclear power, acid rain and VDU radiation. It is suggested that some scares are more a cry for help. Whether people are for or against technological development depends not on the risk they accept but on the different meanings of hazards they understand. To opponents of nuclear power, radiation is a metaphor for the whole insensitive, selfish, destructive industrial system. (U.K.)

Measurements of consumer attitudes and their influence on food choice and acceptability (AIR-CAT).

Science.gov (United States)

Risvik, E; Issanchou, S; Shepherd, R; Tuorila, H

2001-08-01

A changing European food market demands insight into consumer attitudes and their influence on food choice and acceptability. This multidisciplinary area needs to bring together scientists from all regions of Europe and with very different scientific backgrounds. The primary objectives of this concerted action have been: to establish a base with state of the art methods for measurements of consumer attitudes; to review and test existing methods in practical applications in collaboration with European food industries; to perform comparative studies between laboratories on food products, where attitudes play different roles for consumer behaviour in the community countries, such as transgenic foods, irradiated foods, foods with different additives, declarations and process technologies, foods with different origin declarations, ecological foods and foods with strong health connotations (such as high-fat foods). The members of the action have published more than 130 publications related to aspects of how consumer attitudes can be measured and how food choice behaviour is related to acceptability, during the last four years. Studies have been conducted in relation to methodological aspects as well as particular studies related to specific food items and regions for food production. The paper will give a brief selection of relevant results from experiments reported through the action. During 2001 a textbook called "Food, People and Society, in a European Perspective", will be published. The book was initiated during the action and is later supported with additional authors. Altogether 29 chapters will cover the whole spectrum of topics from consumer food choice and acceptability to market perspectives and risk analysis.

Radwaste characteristics and Disposal Facility Waste Acceptance Criteria

International Nuclear Information System (INIS)

Sung, Suk Hyun; Jeong, Yi Yeong; Kim, Ki Hong

2008-01-01

The purpose of Radioactive Waste Acceptance Criteria (WAC) is to verify a radioactive waste compliance with radioactive disposal facility requirements in order to maintain a disposal facility's performance objectives and to ensure its safety. To develop WAC which is conformable with domestic disposal site conditions, we furthermore analysed the WAC of foreign disposal sites similar to the Kyung-Ju disposal site and the characteristics of various wastes which are being generated from Korea nuclear facilities. Radioactive WAC was developed in the technical cooperation with the Korea Atomic Energy Research Institute in consideration of characteristics of the wastes which are being generated from various facilities, waste generators' opinions and other conditions. The established criteria was also discussed and verified at an advisory committee which was comprised of some experts from universities, institutes and the industry. So radioactive WAC was developed to accept all wastes which are being generated from various nuclear facilities as much as possible, ensuring the safety of a disposal facility. But this developed waste acceptance criteria is not a criteria to accept all the present wastes generated from various nuclear facilities, so waste generators must seek an alternative treatment method for wastes which were not worth disposing of, and then they must treat the wastes more to be acceptable at a disposal site. The radioactive disposal facility WAC will continuously complement certain criteria related to a disposal concentration limit for individual radionuclide in order to ensure a long-term safety.

A survey of previous and current industry-wide efforts regarding burnup credit

International Nuclear Information System (INIS)

Jones, R.H.

1989-01-01

Sandia has examined the matter of burnup credit from the perspective of physics, logistics, risk, and economics. A limited survey of the nuclear industry has been conducted to get a feeling for the actual application of burnup credit. Based on this survey, it can be concluded that the suppliers of spent fuel storage and transport casks are in general agreement that burnup credit offers the potential for improvements in cask efficiency without increasing the risk of accidental criticality. The actual improvement is design-specific but limited applications have demonstrated that capacity increases in the neighborhood of 20 percent are not unrealistic. A number of these vendors acknowledge that burnup credit has not been reduced to practice in cask applications and suggest that operational considerations may be more important to regulatory acceptance than to the physics. Nevertheless, the importance of burnup credit to the nuclear industry as a cask design and analysis tool has been confirmed by this survey

Practical radiation monitoring

International Nuclear Information System (INIS)

Keightley, Lynsey; Burgess, Peter; Delahunty, Denise; Richards, Tony; Simpson, John; Woods, Mike

2002-01-01

This Good Practice Guide has been written by a working party of experts from the UK Ionising Radiation Metrology Forum. It describes procedures and methods for assessing radiation levels, outlines the thought processes needed to carry out the measurements and gives practical advice. The methods described are general and based on currently accepted good practice

Women in the Construction Industry in the U.K.: a Cultural Discord?

Science.gov (United States)

Bagilhole, Barbara M.; Dainty, Andrew R. J.; Neale, Richard H.

The construction industry is the most male dominated of all industrial sectors in the United Kingdom. This article reports on a study that explored women's and men's experiences of working in the industry, focusing on how the cultural aspects of the workplace environment impinged upon women's career development. We interviewed more than 80 male and female construction professionals from large construction organizations, and compared their career accounts in order to establish the aspects of the workplace culture that had a gender-differentiated impact on progression. We found that construction organizations formed competitive "power" cultures where women's contributions were marginalized and their careers impeded through a combination of inflexible work practices and discriminatory behavior. These barriers to women's careers were maintained in small project teams by autonomous male operational managers. Their locus of control embraced recruitment, promotion, and staff development, which allowed them to sustain a workplace culture intolerant of nontraditional entrants. We conclude that this cultural environment is likely to remain problematic for women unless it can be changed in a way that values their contribution. This requires a radical shift in middle management attitudes, a departure from current organizational human resource management systems, and a wider acceptance of the need for cultural change within the industry.

Acceptance of dying: a discourse analysis of palliative care literature.

Science.gov (United States)

Zimmermann, Camilla

2012-07-01

The subject of death denial in the West has been examined extensively in the sociological literature. However, there has not been a similar examination of its "opposite", the acceptance of death. In this study, I use the qualitative method of discourse analysis to examine the use of the term "acceptance" of dying in the palliative care literature from 1970 to 2001. A Medline search was performed by combining the text words "accept or acceptance" with the subject headings "terminal care or palliative care or hospice care", and restricting the search to English language articles in clinical journals discussing acceptance of death in adults. The 40 articles were coded and analysed using a critical discourse analysis method. This paper focuses on the theme of acceptance as integral to palliative care, which had subthemes of acceptance as a goal of care, personal acceptance of healthcare workers, and acceptance as a facilitator of care. For patients and families, death acceptance is a goal that they can be helped to attain; for palliative care staff, acceptance of dying is a personal quality that is a precondition for effective practice. Acceptance not only facilitates the dying process for the patient and family, but also renders care easier. The analysis investigates the intertextuality of these themes with each other and with previous texts. From a Foucauldian perspective, I suggest that the discourse on acceptance of dying represents a productive power, which disciplines patients through apparent psychological and spiritual gratification, and encourages participation in a certain way to die. Copyright © 2012 Elsevier Ltd. All rights reserved.

Agents of Law: Psychoanalytic Perspective on Parenthood Practices as Socially Accepted Violence.

Science.gov (United States)

Even-Tzur, Efrat; Hadar, Uri

2017-02-01

This paper presents a theoretical model of parental authority from the vantage point of parental subjecthood, using a roughly Lacanian formulation of what it means to take a (parental) subject position. For Freud, the parental role involves the acceptance of social rules that may, at times, involve a socially acceptable degree of violence. Nevertheless, psychoanalytic discussions have disregarded the parents' subjective experience as agents of the Law and purveyors of threatening authority. The authors elaborate on Freud's and Lacan's ideas and delineate several prime types of parental identifications as agents of Law. The Lacanian theoretical constructs expanded in this discussion include two basic parental positions of authority, termed the Symbolic Father and the Imaginary Father, and one derivative position, called the Perverse Father, which are demonstrated through the story of Dr. Moritz Schreber. The paper discusses how these theoretical constructs bear upon the philosophical conceptualizations of law, violence, and legitimacy.

Handbook of industrial lighting

CERN Document Server

Lyons, Stanley L

2013-01-01

Handbook of Industrial Lighting is a practical guide on the specification, design, installation, operation, and maintenance of lighting in industrial premises. Coverage of the book includes the importance of good localized lighting; the different lighting schemes; lighting for difficult visual tasks; lighting in consideration to safety; and emergency lighting. The book also includes the practical, thermal, ventilation, and energy considerations; lighting in different environments; maintenance of lighting installations; and the cost benefits of efficient lighting. Appendices include useful info

Standardization of nanomaterials characterization by scanning probe microscopy for societal acceptance

International Nuclear Information System (INIS)

Fujita, Daisuke; Onishi, Keiko; Xu, Mingsheng

2009-01-01

Novel nanomaterials are expected to play key roles for the promotion of innovations in the various industrial products. In order to make such novel nanomaterials to be socially acceptable and widely used, it is very important and necessary to establish the reliable nano-characterization methodology for the industrial nanomaterials under the authorized international scheme for standardization. Among the nano-characterization methods, scanning probe microscopy (SPM) is the most versatile both in the measurement functions and the operational environments. Whereas there are various nanomaterials of industrial application, fullerene nanomaterials (FNM) have attracted much attention due to their unique physical properties. Here we show the importance of the quantitative analysis and standardization of SPM using FNM as a typical example.

Standardization of nanomaterials characterization by scanning probe microscopy for societal acceptance

Energy Technology Data Exchange (ETDEWEB)

Fujita, Daisuke [International Center for Materials Nanoarchitectonics (MANA) and Advanced Nano Characterization Center (ANCC), National Institute for Materials Science - NIMS, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Onishi, Keiko [Advanced Nano Characterization Center (ANCC), National Institute for Materials Science (NIMS), 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Xu, Mingsheng [International Center for Young Scientists-Interdisciplinary Materials Research (ICYS-IMAT), National Institute for Materials Science (NIMS), 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan)], E-mail: fujita.daisuke@nims.go.jp

2009-04-01

Novel nanomaterials are expected to play key roles for the promotion of innovations in the various industrial products. In order to make such novel nanomaterials to be socially acceptable and widely used, it is very important and necessary to establish the reliable nano-characterization methodology for the industrial nanomaterials under the authorized international scheme for standardization. Among the nano-characterization methods, scanning probe microscopy (SPM) is the most versatile both in the measurement functions and the operational environments. Whereas there are various nanomaterials of industrial application, fullerene nanomaterials (FNM) have attracted much attention due to their unique physical properties. Here we show the importance of the quantitative analysis and standardization of SPM using FNM as a typical example.

Are industries resonding differently to the employment equity challenge?

Directory of Open Access Journals (Sweden)

Helena Smith

2003-11-01

Full Text Available The primary objective of the study was to determine whether the Employment Equity Questionnaire detects significant differences between employment equity practices of companies from different industries in order to assess the discriminant validity of the scale. Samples of convenience from nine different companies representing different industries, constituted a larger sample of 4729. First and second level factor analyses on 41 common items across all nine companies yielded a single scale with an acceptable Alpha coefficient of 0,959. Analysis of variance, followed by post hoc contrast tests, indicated significant differences between some organisations. The discriminant validity of the scale could be established and recommendations for further improvement of the scale were made. Opsomming Die doel van die studie was om te bepaal of die “Employment Equity Questionnaire" betekenisvolle verskille kan uitwys tussen die werkgelykheidspraktyke van maatskappye vanuit verskeie industrieë ten einde die diskriminante geldigheid van die instrument te bepaal. Gerieflikheidsteekproewe van nege verskillende maatskappye, verteenwoordigend van verskillende industrieë, het ’n totale steekproef van 4729 daargestel. Eerste en tweede vlak faktorontledings is op 41 gemeenskaplike items oor al nege maatksappye gedoen en dit het ’n aanvaarbare Alfa koëffisiënt van 0,959 opgelewer. ’n Variansie-ontleding, gevolg deur post hoc kontrastoetse, het op betekenisvolle verskille tussen die onderskeie organisasies gedui. Die diskriminante geldigheid van die instrument kon vasgestel word en aanbevelings ter verbetering daarvan is aan die hand gedoen.

Changes in the public acceptance of nuclear power among the populace

International Nuclear Information System (INIS)

Lee, C.K.

1988-01-01

The development of nuclear power is often hampered due to the lack of public acceptability. The degree of its public acceptance gradually but distinctly decreases with the progress of industrialization and also with the increase in per-capita income as well as upgrading of social welfare program. The execution of nuclear power projects is possible when the majority of populace are in support of its development, while it becomes difficult so long as more than a half of the people is reluctant to make use of it. For the convenience sake, the patterns of nuclear acceptability are arbitrarily categorized in six stages from a tranquil state to a hopeless state. In order not to be driven into such helpless stage, some preventive measures are suggested as a recommendation herein

KNOWLEDGE AND ACCEPTANCE OF RFID TRACEABILITY SOLUTIONS

Directory of Open Access Journals (Sweden)

Zoltan KATO

2014-06-01

Full Text Available In recent years the food market has become highly dynamic. Food crises in the early 90's, or those of the recent years, such as avian flu pandemic, swine flu, the cucumber or horse meat crises all had a negative impact on the Romanian food industry. Food deficiencies have led not only to contamination but also to the illness or death of some consumers. The products traceability is a prerequisite for success in the food industry. As a modern solution, RFID technology can be useful for traceability applications made with rewritable passive RFID tags. This paper aims to examine how RFID technology can be useful for traceability applications and will submit a diligent search regarding the degree of knowledge of RFID technology and the acceptance of an empirical model by the employees of Romanian companies.

Applying industrial process improvement techniques to increase efficiency in a surgical practice.

Science.gov (United States)

Reznick, David; Niazov, Lora; Holizna, Eric; Siperstein, Allan

2014-10-01

The goal of this study was to examine how industrial process improvement techniques could help streamline the preoperative workup. Lean process improvement was used to streamline patient workup at an endocrine surgery service at a tertiary medical center utilizing multidisciplinary collaboration. The program consisted of several major changes in how patients are processed in the department. The goal was to shorten the wait time between initial call and consult visit and between consult and surgery. We enrolled 1,438 patients enrolled in the program. The wait time from the initial call until consult was reduced from 18.3 ± 0.7 to 15.4 ± 0.9 days. Wait time from consult until operation was reduced from 39.9 ± 1.5 to 33.9 ± 1.3 days for the overall practice and to 15.0 ± 4.8 days for low-risk patients. Patient cancellations were reduced from 27.9 ± 2.4% to 17.3 ± 2.5%. Overall patient flow increased from 30.9 ± 5.1 to 52.4 ± 5.8 consults per month (all P process improvement methodology, surgery patients can benefit from an improved, streamlined process with significant reduction in wait time from call to initial consult and initial consult to surgery, with reduced cancellations. This generalized process has resulted in increased practice throughput and efficiency and is applicable to any surgery practice. Copyright © 2014 Elsevier Inc. All rights reserved.

Mediating effect of sustainable product development on relationship between quality management practices and organizational performance: Empirical study of Malaysian automotive industry

Science.gov (United States)

Ahmad, Mohd Akhir; Asaad, Mohd Norhasni; Saad, Rohaizah; Iteng, Rosman; Rahim, Mohd Kamarul Irwan Abdul

2016-08-01

Global competition in the automotive industry has encouraged companies to implement quality management practices in all managerial aspects to ensure customer satisfaction in products and reduce costs. Therefore, guaranteeing only product quality is insufficient without considering product sustainability, which involves economic, environment, and social elements. Companies that meet both objectives gain advantages in the modern business environment. This study addresses the issues regarding product quality and sustainability in small and medium-sized enterprises in the Malaysian automotive industry. A research was carried out in 91 SMEs automotive suppliers in throughout Malaysia. The analyzed using SPSS ver.23 has been proposed in correlation study. Specifically, this study investigates the relationship between quality management practices and organizational performance as well as the mediating effect of sustainable product development on this relationship.

Factors That Lead to Environmentally Sustainable Practices in the Restaurant Industry: A Qualitative Analysis of Two Green Restaurant Innovators

Science.gov (United States)

Nyheim, Peter

2012-01-01

In recent years, more organizations, including restaurants, have concerned themselves with sustainability. As with any new endeavor, guidance is needed. The purpose of this study was to investigate factors that lead to environmentally sustainable practices in the restaurant industry. Using Rogers' Diffusion of Innovation Theory as a…

Biological treatment of industrial wastes; Tratamiento biologico de residuos industriales

Energy Technology Data Exchange (ETDEWEB)

Ortiz de Zarate Apodaca, J.M.; Abia Aguila, L

1997-04-01

There are organic elements used in industrial processes which are not able to be recovered. The biological treatment is the alternative for eliminating the organic pollutants from industrial waste water. This technology is being widely accepted because of its low environmental impact. (Author)

Clinical practice: new challenges for the advanced practice nurse.

Science.gov (United States)

Bartel, J C; Buturusis, B

2000-12-01

This report describes the challenges for advanced practice nurses (APNs) relative to supply and demand issues. The article also includes opportunities with the Balanced Budget Act, physician acceptance of Advanced Practice Nurses, and expanding practice opportunities. The challenges include the nursing shortage (both in nursing students and faculty), the aging of the nursing workforce, and a lag in nursing salaries; increased demand for nursing based on aging baby boomers, increasing patient acuity and technology, and new arenas for practice. The Balanced Budget Act of 1997 provided new opportunities for advanced practice nurses, including enhanced autonomy to provide services and bill independently of physicians. With these changes come new opportunities for advanced practice nurse entrepreneurs in the areas of independent practice, including opportunities to positively impact the health of families and communities in alignment with the Federal government's vision for "Healthy People 2010." As physician acceptance of advanced practice nurses continues to grow and in light of the changes in medical practice and education (residency reduction), opportunities to expand collaborative practice arrangements also exist. APNs are best suited to make the most of these changes. One example of an opportunity for independent practice, a Community Wellness Center, is developed as an entrepreneurial venture benefiting both the APN and the health of a community. Who better than registered nurses (RNs), especially those practicing at the advanced level, can ensure that these opportunities and challenges are addressed in an ethical manner and focused on the needs and health of the community?

Standard practice for digital imaging and communication in nondestructive evaluation (DICONDE) for digital radiographic (DR) test methods

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice facilitates the interoperability of digital X-ray imaging equipment by specifying image data transfer and archival methods in commonly accepted terms. This document is intended to be used in conjunction with Practice E2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, storage and archival storage. The goal of Practice E2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE results on any system conforming to the DICONDE standard. Toward that end, Practice E2339 provides a data dictionary and a set of information modules that are applicable to all NDE modalities. This practice supplements Practice E2339 by providing information object definitions, information modules and a ...

The revision of RP 91 on criteria for acceptability of radiological (including radiotherapy) and nuclear medicine installations

International Nuclear Information System (INIS)

Faulkner, K.; Malone, J. F.; Christofides, S.; Lillicrap, S.; Horton, P.

2013-01-01

In 1997 the European Commission published Radiation Protection 91: 'Criteria for acceptability of radiological (including radiotherapy) and nuclear medicine installations'(1). This document specified the minimum criteria for acceptability. It has been used to this effect in legislation, codes of practice and by individual professionals. In a single document, it defined a level of performance at which remedial action was required. The document specified a series of parameters which characterised equipment performance and acceptable levels of performance. In its time it proved to be a useful document which was applied in member states to various degrees. Since the publication of Report 91 in 1997(1), a series of weaknesses emerged over time. Development of new radiological systems and technologies, as well as improvements in traditional technologies, has created circumstances where the acceptability criteria were in need of review. These weaknesses were recognised by the European Commission and a tender for its revision was issued. The criteria were developed by a team drawn from a broad range of backgrounds including hospitals, industry, government bodies, regulators and standardisation organisations. Representatives were mainly from Europe, but individuals from the American Association of Physicists in Medicine and International Atomic Energy Agency were included in the drafting process. This study describes the process employed in developing the revised document and the consultation process involved. One of the major difficulties the revision team encountered was related to an understanding of the actual meaning of the EC Directive(2). The view taken by the revision team was that Article 8, paragraph 3 places responsibilities on both the holders of radiological equipment and competent authorities. The acceptability criteria have been produced consistent with the European Commission's Medical Exposures Directive(2), which requires that patient exposures are

Bridging the Gap between Social Acceptance and Ethical Acceptability.

Science.gov (United States)

Taebi, Behnam

2017-10-01

New technology brings great benefits, but it can also create new and significant risks. When evaluating those risks in policymaking, there is a tendency to focus on social acceptance. By solely focusing on social acceptance, we could, however, overlook important ethical aspects of technological risk, particularly when we evaluate technologies with transnational and intergenerational risks. I argue that good governance of risky technology requires analyzing both social acceptance and ethical acceptability. Conceptually, these two notions are mostly complementary. Social acceptance studies are not capable of sufficiently capturing all the morally relevant features of risky technologies; ethical analyses do not typically include stakeholders' opinions, and they therefore lack the relevant empirical input for a thorough ethical evaluation. Only when carried out in conjunction are these two types of analysis relevant to national and international governance of risky technology. I discuss the Rawlsian wide reflective equilibrium as a method for marrying social acceptance and ethical acceptability. Although the rationale of my argument is broadly applicable, I will examine the case of multinational nuclear waste repositories in particular. This example will show how ethical issues may be overlooked if we focus only on social acceptance, and will provide a test case for demonstrating how the wide reflective equilibrium can help to bridge the proverbial acceptance-acceptability gap. © 2016 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

Industrial statistics with Minitab

CERN Document Server

Cintas, Pere Grima; Llabres, Xavier Tort-Martorell

2012-01-01

Industrial Statistics with MINITAB demonstrates the use of MINITAB as a tool for performing statistical analysis in an industrial context. This book covers introductory industrial statistics, exploring the most commonly used techniques alongside those that serve to give an overview of more complex issues. A plethora of examples in MINITAB are featured along with case studies for each of the statistical techniques presented. Industrial Statistics with MINITAB: Provides comprehensive coverage of user-friendly practical guidance to the essential statistical methods applied in industry.Explores

Examining Acceptance of an Integrated Personal Health Record (PHR)

Science.gov (United States)

Morton, Alicia A.

2011-01-01

Objective: The purpose of this project was to examine the practice question, "What are the factors influencing acceptance of integrated PHRs for self-care management among the Howard University Hospital (HUH) Diabetes Treatment Clinic (DTC) patients?" These factors include a) demographic characteristics, b) computer…

Survey of Accepted Practice following Failed Intubation for Emergency Caesarean Delivery

Directory of Open Access Journals (Sweden)

Daniel Soltanifar

2015-01-01

Full Text Available Background. There is no consensus on the optimum management of failed tracheal intubation in emergency cesarean delivery performed for fetal compromise. The decision making process on whether to wake the patient or continue anesthesia with a supraglottic airway device is an underexplored area. This survey explores perceptions and experiences of obstetric anesthetists managing failed intubation. Methods. Anesthetists attending the Group of Obstetric Anaesthetists London (GOAL Meeting in April 2014 were surveyed. Results. Ninety-three percent of anesthetists surveyed would not always wake the patient in the event of failed intubation for emergency cesarean delivery performed for fetal compromise. The median (interquartile range of perceived acceptability of continuing anesthesia with a well-fitting supraglottic airway device, assessed using a visual analogue scale (0–100; 0 completely unacceptable; 100 completely acceptable, was 90 [22.5]. Preoperative patient consent regarding the use of a supraglottic airway device for surgery in the event of failed intubation would affect the decision making of 40% of anaesthetists surveyed. Conclusion. These results demonstrate that a significant body of anesthetists with a subspecialty interest in obstetric anesthesia in the UK would not always wake up the patient and would continue with anesthesia and surgery with a supraglottic airway device in this setting.

Managing health and safety risks: Implications for tailoring health and safety management system practices.

Science.gov (United States)

Willmer, D R; Haas, E J

2016-01-01

As national and international health and safety management system (HSMS) standards are voluntarily accepted or regulated into practice, organizations are making an effort to modify and integrate strategic elements of a connected management system into their daily risk management practices. In high-risk industries such as mining, that effort takes on added importance. The mining industry has long recognized the importance of a more integrated approach to recognizing and responding to site-specific risks, encouraging the adoption of a risk-based management framework. Recently, the U.S. National Mining Association led the development of an industry-specific HSMS built on the strategic frameworks of ANSI: Z10, OHSAS 18001, The American Chemistry Council's Responsible Care, and ILO-OSH 2001. All of these standards provide strategic guidance and focus on how to incorporate a plan-do-check-act cycle into the identification, management and evaluation of worksite risks. This paper details an exploratory study into whether practices associated with executing a risk-based management framework are visible through the actions of an organization's site-level management of health and safety risks. The results of this study show ways that site-level leaders manage day-to-day risk at their operations that can be characterized according to practices associated with a risk-based management framework. Having tangible operational examples of day-to-day risk management can serve as a starting point for evaluating field-level risk assessment efforts and their alignment to overall company efforts at effective risk mitigation through a HSMS or other processes.

Biometrics and smart card based applications for nuclear industry

International Nuclear Information System (INIS)

Nishanth Reddy, J.; Dheeraj Reddy, J.; Narender Reddy, J.

2004-01-01

Biometrics has emerged as a convenient, foolproof and well-accepted technology for identification around the globe. Nucleonix has developed innovative solutions based on finger scan biometrics for various industries. This paper closely looks into the application areas for the nuclear industry and how it will benefit this industry, in terms of identification, access control, security of PCs and applications, attendance, machinery usage control and other custom applications. (author)

Neutron absorber qualification and acceptance testing from the designer's perspective

International Nuclear Information System (INIS)

Bracey, W.; Chiocca, R.

2004-01-01

Starting in the mid 1990's, the USNRC began to require less than 100% credit for the 10B present in fixed neutron absorbers spent fuel transport packages. The current practice in the US is to use only 75% of the specified 10B in criticality safety calculations unless extensive acceptance testing demonstrates both the presence of the 10B and uniformity of its distribution. In practice, the NRC has accepted no more than 90% credit for 10B in recent years, while other national competent authorities continue to accept 100%. More recently, with the introduction of new neutron absorber materials, particularly aluminum / boron carbide metal matrix composites, the NRC has also expressed expectations for qualification testing, based in large part on Transnuclear's successful application to use a new composite material in the TN-68 storage / transport cask. The difficulty is that adding more boron than is really necessary to a metal has some negative effects on the material, reducing the ductility and the thermal conductivity, and increasing the cost. Excessive testing requirements can have the undesired effect of keeping superior materials out of spent fuel package designs, without a corresponding justification based on public safety. In European countries and especially in France, 100% credit has been accepted up to now with materials controls specified in the Safety Analysis Report (SAR): Manufacturing process approved by qualification testing Materials manufacturing controlled under a Quality Assurance system. During fabrication, acceptance testing directly on products or on representative samples. Acceptance criteria taking into account a statistical uncertainty corresponding to 3σ. The original and current bases for the reduced 10 B credit, the design requirements for neutron absorber materials, and the experience of Transnuclear and Cogema Logistics with neutron absorber testing are examined. Guidelines for qualification and acceptance testing and process controls

IMPROVING THE STRATEGIC PLANNING OF THE DEFENSE-INDUSTRIAL COMPLEX CORPORATIONS OF RUSSIA

Directory of Open Access Journals (Sweden)

Katrina B. Dobrova

2016-01-01

Full Text Available In this paper, we develop proposals to improve the strategic planning of Russian corporations of the defense-industrial complex. The relevance of the study due to the fact that the methodology for the adaptation of the strategic management of the military-industrial enterprises with substantial scientifi c and technical potential, should take into account a number of features, such as the identifi cation of the features of competition in the future; understanding of the prospects and development opportunities in the medium and long term; assessment of resource potential; impact assessment and risk in the implementation of promising strategies. In the more precise understanding of the strategy as a pattern of behavior aimed at achieving these goals, a set of rules for search and opportunities; strategic plan is seen as a series of specifi c steps and actions that are integrated in space and time, which lead to the transformation of the current position to the desired. We consider the practice of corporate transformation strategies of the world defense industry using a system method. To improve the strategic planning of Russian defense industry corporations it is recommended to apply the strategy of adapting the defense industry companies and their diversifi cation with the civilian sectors. The key vectors of the development strategy of the defense-industrial complex of Russian corporations are defi ned: providing an acceptable investment climate in the sphere of military-technical cooperation; neutralization of threats by the activities of DIC TNCs; creation of their own TNK defense industry and others.

Acceptability and characterization of extruded pinto, navy and black beans.

Science.gov (United States)

Simons, Courtney W; Hall, Clifford; Tulbek, Mehmet; Mendis, Mihiri; Heck, Taylor; Ogunyemi, Samuel

2015-08-30

Consumption of dry beans has been relatively flat over the last decade. Creating new bean products may increase the consumption of beans and allow more consumers to obtain the health benefits of beans. In this study, pinto, navy and black beans were milled and the resulting flours extruded into puffs. Unflavored extruded puffs were evaluated by untrained panelists using a hedonic scale for appearance, flavor, texture and overall acceptability. The compositions of raw flours and extrudates were characterized. Sensory results indicated that all beans met or exceeded the minimum requirement for acceptability. Overall acceptability of navy and pinto beans was not significantly different, while acceptability of black bean puffs was significantly lower. Total protein (198-217 g kg(-1)) in extrudates was significantly different among the three beans. Total starch ranged from 398 to 406 g kg(-1) and was not significantly different. Resistant starch, total extractable lipid and raffinose contents were significantly reduced by extrusion. Extrusion did not affect crude fiber and phytic acid contents. The minimal effects on protein and fiber contents, the significant reduction in raffinose content and the acceptability of the unflavored extruded puffs support using various bean flours as ingredients in extruded puffed products. © 2014 Society of Chemical Industry.

[German physicians' access to professional knowledge. Acceptance, quality and availability of professional information with special reference to electronic information media].

Science.gov (United States)

Reng, Carl-Michael; Friedrich, Hans-Jürgen; Timmer, Antje; Schölmerich, Jürgen

2003-11-15

The growing relevance of continuous medical education is evident. Also information retrieval helping to solve clinical problems yet at the patient's bedside becomes more and more important. This study challenges common and coming methods of information retrieval applied by German physicians. It helps answering the question which advantage or disadvantage due to the chosen method of information acquisition may arise. It also shows which practical relevance and which grade of quality the information seeking doctor may anticipate. A questionnaire was sent out to all registered clinicians in hospital and practice in Germany. Not only traditional means of information retrieval were analyzed. Also, a lot of the questions posed focused on the acceptance and use of new media in the professional context. About 16,000 colleagues answered by filling in the complete form therewith allowing a deep insight into their informational needs and habits. While traditional media like books and scientific papers enjoy wide public confidence, the acceptance and estimated reliability of virtual sources of information today still remain restrained. The lack of transparency of the virtual sources and ways of information within the web according to often imprecise rules for quality assurance lead to major complaint. Information offered directly by the industry has a very low rate of acceptance. To gain higher confidence in electronic media presenting professional knowledge and advanced medical training, the development of technological advantages today seems to be less relevant. Work on the transparency of the informational structures including clear definition of resources and clear indication of possible conflicts of interest are just as important as a comprehensible quality of forthcoming medical content.

Consumer acceptance of insect-based foods in the Netherlands: Academic and commercial implications.

Science.gov (United States)

House, Jonas

2016-12-01

Despite growing interest in the use of insects as food, uptake of insect-based foods in Europe is low. Existing research into Western consumer acceptance of insects as food tends to emphasise the role of individual cognition in food choice at the expense of social or contextual factors, and typically frames consumer acceptance as a general issue, rather than relevant only for relatively few early adopters. This paper outlines empirical work, theoretically and methodologically informed by a critical appraisal of previous research, with consumers of insect-based convenience foods in the Netherlands. Reported initial motivations for trying insect foods are shown to be substantially different from factors - such as price, taste, availability, and 'fit' with established eating practices - which affect repeat consumption. Such factors are congruent with those affecting routine consumption of more conventional foods, indicating that insect foods should be analysed according to similar criteria and should be designed with more practical considerations in mind. Further, a reorientation of consumer acceptance research is proposed. Research should shift from attempts to forecast acceptance and engage with 'actual' examples of insect consumption; social, practical and contextual factors affecting food consumption should be emphasised; and - following work on the establishment of other novel foods - early adopters, rather than general populations, should receive greater analytic attention. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Application of Automated Facial Expression Analysis and Qualitative Analysis to Assess Consumer Perception and Acceptability of Beverages and Water

OpenAIRE

Crist, Courtney Alissa

2016-01-01

Sensory and consumer sciences aim to understand the influences of product acceptability and purchase decisions. The food industry measures product acceptability through hedonic testing but often does not assess implicit or qualitative response. Incorporation of qualitative research and automated facial expression analysis (AFEA) may supplement hedonic acceptability testing to provide product insights. The purpose of this research was to assess the application of AFEA and qualitative analysis ...

Qualification Practices in Nuclear Industry: Steam Generator Eddy Current Probe Qualification

International Nuclear Information System (INIS)

Vavrous, M.; Gracin, R.

2010-01-01

Through history of nuclear power plant operation, a large number of nuclear power plant forced outages related to tube failures occurred. It resulted with large amount of repair and outage costs, what initiated implementation of regulated practice of periodical tube examination and tube condition monitoring. Purpose of examinations is to detect existing or potential tube degradations that could affect tube integrity and therefore result in forced outages and unwanted costs related to emergency repair activities and loss of ability for electrical power production. With increased examination activities, additional information about steam generator tube condition became available and additional methods for ensuring tube integrity became available. As the number of examination solutions increased, need for validation and assessment of examination methods occurred. For that purpose, a large number of standards and guidelines with its requirements were implemented in nuclear industry regulatory requirements to ensure that adequately validated examinations are applied. With this purpose, qualification requirements for inspection activities were implemented with other requirements. With progress of technology, progress was also achieved in examination methods and more advanced examination methods and advanced inspection systems were developed. This advancement is accompanied by advancement in regulatory requirements regarding inspection and monitoring of tube integrity and condition. Ultimate goal of implementation of qualification processes and its requirements in all aspects of nuclear industry is to achieve minimal rate of forced outages, which would ensure maximum electrical power production capabilities and maximum optimization of operational costs while maintaining safe operation in accordance with environmental policies. This article will focus on qualification of steam generator eddy current bobbin probe.(author).

Acceptance, control of and trade in irradiated food

International Nuclear Information System (INIS)

1989-01-01

Proceedings of an International Conference on the Acceptance, Control of and Trade in Irradiated Food jointly organized by the Food and Agriculture Organization of the United Nations, the World Health Organization, the International Atomic Energy Agency and the International Trade Centre-UNCTAD/GATT and held in Geneva, 12-16 December 1988. The Conference was prompted by the lack of acceptance by some governments, which do not see a need for the application of food irradiation technology in their own countries, and as a consequence may hamper its use in other countries where its application could significantly improve consumer health and nutrition, as well as national economic and trading potential. This publication contains discussions on the key issues of the wholesomeness of irradiated food, the contribution of this technology to public health, food security and international trade, the control of the process to ensure its correct application for consumer protection, and the acceptance of irradiated food by industry and consumers. The proceedings include the International Document on Food Irradiation, highlighting the major issues related to the acceptance of irradiated food by consumers, governmental and intergovernmental activities, the control of the process, and trade. A number of Member States formally expressed their views on this International Document, expressing either endorsement or reservation, and their statements are included in these proceedings. Refs, fig and tabs

Box-ticking and Olympic high jumping - Physicians' perceptions and acceptance of national physician validation systems.

Science.gov (United States)

Sehlbach, Carolin; Govaerts, Marjan J B; Mitchell, Sharon; Rohde, Gernot G U; Smeenk, Frank W J M; Driessen, Erik W

2018-05-24

National physician validation systems aim to ensure lifelong learning through periodic appraisals of physicians' competence. Their effectiveness is determined by physicians' acceptance of and commitment to the system. This study, therefore, sought to explore physicians' perceptions and self-reported acceptance of validation across three different physician validation systems in Europe. Using a constructivist grounded-theory approach, we conducted semi-structured interviews with 32 respiratory specialists from three countries with markedly different validation systems: Germany, which has a mandatory, credit-based system oriented to continuing professional development; Denmark, with mandatory annual dialogs and ensuing, non-compulsory activities; and the UK, with a mandatory, portfolio-based revalidation system. We analyzed interview data with a view to identifying factors influencing physicians' perceptions and acceptance. Factors that influenced acceptance were the assessment's authenticity and alignment of its requirements with clinical practice, physicians' beliefs about learning, perceived autonomy, and organizational support. Users' acceptance levels determine any system's effectiveness. To support lifelong learning effectively, national physician validation systems must be carefully designed and integrated into daily practice. Involving physicians in their design may render systems more authentic and improve alignment between individual ambitions and the systems' goals, thereby promoting acceptance.

Closing the door on pharma? A national survey of family medicine residencies regarding industry interactions.

Science.gov (United States)

Fugh-Berman, Adriane; Brown, Steven R; Trippett, Rachel; Bell, Alicia M; Clark, Paige; Fleg, Anthony; Siwek, Jay

2011-05-01

To assess the extent and type of interactions U.S. family medicine residencies permit industry to have with medical students and residents. In 2008, the authors e-mailed a four-question survey to residency directors or coordinators at all 460 accredited U.S. family medicine residencies concerning the types of industry support and interaction permitted. The authors conducted quantitative and qualitative analyses of survey responses and written comments. Residencies that did not permit any industry food, gifts, samples, or support of residency activities were designated "pharma-free." The survey response rate was 62.2% (286/460). Among responding family medicine residencies, 52.1% refused drug samples, 48.6% disallowed industry gifts or food, 68.5% forbade industry-sponsored residency activities, and 44.1% denied industry access to students and residents at the family medicine center. Seventy-five residencies (26.2%) were designated as "pharma-free." Medical-school-based and medical-school-administered residencies were no more likely than community-based residencies to be pharma-free. Among the 211 programs that permitted interaction, 68.7% allowed gifts or food, 61.1% accepted drug samples, 71.1% allowed industry representatives access to trainees in the family medicine center, and 37.9% allowed industry-sponsored residency activities. Respondents commented on challenges inherent to limiting industry interactions. Many programs noted recent changes in plans or practices. Most family medicine residencies limit industry interaction with trainees. Because industry interactions can have adverse effects on rational prescribing, residency programs should assess the benefits and harms of these relationships. Copyright © by the Association of American medical Colleges.

Supporting Infrastructure and Acceptability Issues for Materials Used in New Generation Vehicles

Energy Technology Data Exchange (ETDEWEB)

Das, S.; Curlee, T.R.; Jones, D.W.; Leiby, P.E.; Rubin, J.D.; Schexnayder, S.M.; Vogt, D.P.; Wolfe, A.K.

1999-03-01

To achieve its goal of producing vehicles that use two thirds less fuel than current vehicles, the Partnership of a New Generation of Vehicles (PNGV) is designing vehicles that will use lightweight materials in place of heavier materials used in current vehicles. using new materials in automobiles will require the development of a supporting infrastructure to produce both the substitute materials and the components of the substitute materials, as well as the automotive parts constructed from the new materials. This report documents a set of analyses that attempt to identify potential barriers--economic, infrastructure, and public acceptance barriers--to the materials substitution in New Generation Vehicles. The analyses rely on hypothetical vehicle market penetration scenarios and material composition. The approach is comprehensive, examining issues ranging from materials availability to their eventual disposition and its effect on the automobile recycling industry, and from supporting industries' capacity to the public acceptability of these vehicles. The analyses focus on two likely substitute materials, aluminum and glass-reinforced polymer composites.

Cyber security best practices for the nuclear industry

International Nuclear Information System (INIS)

Badr, I.

2012-01-01

When deploying software based systems, such as, digital instrumentation and controls for the nuclear industry, it is vital to include cyber security assessment as part of architecture and development process. When integrating and delivering software-intensive systems for the nuclear industry, engineering teams should make use of a secure, requirements driven, software development life cycle, ensuring security compliance and optimum return on investment. Reliability protections, data loss prevention, and privacy enforcement provide a strong case for installing strict cyber security policies. (authors)

Cyber security best practices for the nuclear industry

Energy Technology Data Exchange (ETDEWEB)

Badr, I. [Rational IBM Software Group, IBM Corporation, Evanston, IL 60201 (United States)

2012-07-01

When deploying software based systems, such as, digital instrumentation and controls for the nuclear industry, it is vital to include cyber security assessment as part of architecture and development process. When integrating and delivering software-intensive systems for the nuclear industry, engineering teams should make use of a secure, requirements driven, software development life cycle, ensuring security compliance and optimum return on investment. Reliability protections, data loss prevention, and privacy enforcement provide a strong case for installing strict cyber security policies. (authors)

Learning Lessons from TMI to Fukushima and Other Industrial Accidents: Keys for Assessing Safety Management Practices

International Nuclear Information System (INIS)

Dechy, N.; Rousseau, J.-M.; Dien, Y.; Montmayeul, R.; Llory, M.

2016-01-01

The main objective of the paper is to discuss and to argue about transfer, from an industrial sector to another industrial sector, of lessons learnt from accidents. It will be achieved through the discussion of some theoretical foundations and through the illustration of examples of application cases in assessment of safety management practices in Nuclear Power Plant (NPP). The nuclear energy production industry has faced three big ones in 30 years (TMI, Chernobyl, Fukushima) involving three different reactor technologies operated in three quite different cultural, organizational and regulatory contexts. Each of those accident has been the origin of questions, but also generator of lessons, some changing the worldview (see Wilpert and Fahlbruch, 1998) of what does cause an accident in addition to the engineering view about the importance of technical failures (human error, safety culture, sociotechnical interactions). Some of their main lessons were implemented such as improvements of human-machine interfaces ergonomics, recast of some emergency operating procedures, severe accident mitigation strategies and crisis management. Some lessons did not really provide deep changes. It is the case for organizational lessons such as, organizational complexity, management of production pressures, regulatory capture, and failure to learn, etc.

Risk Management for New Product Development Projects in Food Industry

Directory of Open Access Journals (Sweden)

Porananond, D.

2014-07-01

Full Text Available Project risk management provides a guideline for decision making in new product development (NPD projects, reducing uncertainty and increasing success rate. However, the acceptance of formal risk management applications in industry, especially for NPD projects is still in question. A study of a food conglomerate in Thailand found that only 9% of NPD projects used a systematic approach for managing risk. 61% of the projects realised the importance of risk management, while the remaining 30% did not involve risk management at all. This study aims to develop a risk management model for NPD projects in the food industry. The first section of this paper reviews the literature on risk management theory, including international standards for risk and project management (ISO31000 and ISO21500, publications for the Project Management Body of Knowledge (PMBOK, by a professional organisation the Project Management Institute (PMI, and also academic research. 182 academic papers, published between January 2002 and August 2012 were selected. The second part interviews conducted with eight NPD experts from five of the major food manufacturers in Thailand to examine their risk management practices and problems. Conclusions are made on five topics : classification of research method, project type and industrial segment, distribution of articles by region, tools & techniques for risk management and risk factors in projects. Specific requirements of risk management for NPD projects in the food industry are identified. A risk management model and the concept of risk management applications for the food industry are proposed.

Maternal Acceptance: Its Contribution to Children's Favorable Perceptions of Discipline and Moral Identity.

Science.gov (United States)

Patrick, Renee B; Gibbs, John C

2016-01-01

The authors examined the contribution of maternal acceptance or warmth to children's and adolescents' perceptions of discipline and formation of moral identity. The sample consisted of 93 male and female students from Grades 5, 8, and 10 and their mothers. Students completed measures pertaining to perceived maternal discipline practices and acceptance-rejection, as well as moral identity. A subsample of mothers reported on their accepting or rejecting actions toward their children. Children were more likely to feel accepted, if their mothers used inductive discipline (vs. power assertion and love withdrawal). Perceived acceptance was also related to more favorable discipline evaluations in certain respects. Specifically, inductive discipline recipients who felt accepted also evaluated induction as appropriate and responded to it with positive and guilt-related emotions. Power assertion was evaluated as appropriate among those children who did feel accepted. Finally, among inductive discipline recipients, those who felt accepted also reported higher moral identity.

Standard practice for ultrasonic testing of wrought products

CERN Document Server

American Society for Testing and Materials. Philadelphia

2013-01-01

1.1 Purpose—This practice establishes the minimum requirements for ultrasonic examination of wrought products. Note 1—This standard was adopted to replace MIL-STD-2154, 30 Sept. 1982. This standard is intended to be used for the same applications as the document which it replaced. Users should carefully review its requirements when considering its use for new, or different applications, or both. 1.2 Application—This practice is applicable for examination of materials such as, wrought metals and wrought metal products. 1.2.1 Wrought Aluminum Alloy Products—Examination shall be in accordance with Practice B 594. 1.3 Acceptance Class—When examination is performed in accordance with this practice, engineering drawings, specifications, or other applicable documents shall indicate the acceptance criteria. Five ultrasonic acceptance classes are defined in Table 1. One or more of these classes may be used to establish the acceptance criteria or additional or alternate criteria may be specified. 1.4 Ord...

Efficient use of energy: investment practice in industry; Effiziente Energienutzung: Investitionspraxis in der Industrie

Energy Technology Data Exchange (ETDEWEB)

Kuster, J. [BHP - Brugger, Hanser und Partner AG, Zuerich (Switzerland); Zweiacker, J.-F. [Rapp AG Ingenieure und Planer, Biel (Switzerland); Rosch, M. [Consulting Verfahrenstechnik, Allschwil (Switzerland)

2000-07-01

This report for the Swiss Federal Office of Energy (SFOE) presents the results of a study made on drying processes used in industry and possible ways of promoting investment in measures to increase the efficient use of energy. The energy consumption of dehydration and drying processes used in industry is examined and the savings potential for these processes estimated. Examples of the processes investigated are given and figures for the energy consumption for dehydration and drying processes in several different industrial sectors are quoted. The report then examines, on the one hand, the factors that hem innovations in this area and, on the other, those that promote them. Further, the report looks into which reasons are responsible for the realisation or non-realisation of technically and economically viable solutions for improving the energy-efficiency of the dehydration and drying processes.

Meditation experts try Virtual Reality Mindfulness: A pilot study evaluation of the feasibility and acceptability of Virtual Reality to facilitate mindfulness practice in people attending a Mindfulness conference.

Science.gov (United States)

Navarro-Haro, María V.; López-del-Hoyo, Yolanda; Campos, Daniel; Linehan, Marsha M.; Hoffman, Hunter G.; García-Palacios, Azucena; Modrego-Alarcón, Marta; Borao, Luis; García-Campayo, Javier

2017-01-01

Regular mindfulness practice benefits people both mentally and physically, but many populations who could benefit do not practice mindfulness. Virtual Reality (VR) is a new technology that helps capture participants’ attention and gives users the illusion of “being there” in the 3D computer generated environment, facilitating sense of presence. By limiting distractions from the real world, increasing sense of presence and giving people an interesting place to go to practice mindfulness, Virtual Reality may facilitate mindfulness practice. Traditional Dialectical Behavioral Therapy (DBT®) mindfulness skills training was specifically designed for clinical treatment of people who have trouble focusing attention, however severe patients often show difficulties or lack of motivation to practice mindfulness during the training. The present pilot study explored whether a sample of mindfulness experts would find useful and recommend a new VR Dialectical Behavioral Therapy (DBT®) mindfulness skills training technique and whether they would show any benefit. Forty four participants attending a mindfulness conference put on an Oculus Rift DK2 Virtual Reality helmet and floated down a calm 3D computer generated virtual river while listening to digitized DBT® mindfulness skills training instructions. On subjective questionnaires completed by the participants before and after the VR DBT® mindfulness skills training session, participants reported increases/improvements in state of mindfulness, and reductions in negative emotional states. After VR, participants reported significantly less sadness, anger, and anxiety, and reported being significantly more relaxed. Participants reported a moderate to strong illusion of going inside the 3D computer generated world (i.e., moderate to high “presence” in VR) and showed high acceptance of VR as a technique to practice mindfulness. These results show encouraging preliminary evidence of the feasibility and acceptability of

Meditation experts try Virtual Reality Mindfulness: A pilot study evaluation of the feasibility and acceptability of Virtual Reality to facilitate mindfulness practice in people attending a Mindfulness conference.

Directory of Open Access Journals (Sweden)

María V Navarro-Haro

Full Text Available Regular mindfulness practice benefits people both mentally and physically, but many populations who could benefit do not practice mindfulness. Virtual Reality (VR is a new technology that helps capture participants' attention and gives users the illusion of "being there" in the 3D computer generated environment, facilitating sense of presence. By limiting distractions from the real world, increasing sense of presence and giving people an interesting place to go to practice mindfulness, Virtual Reality may facilitate mindfulness practice. Traditional Dialectical Behavioral Therapy (DBT® mindfulness skills training was specifically designed for clinical treatment of people who have trouble focusing attention, however severe patients often show difficulties or lack of motivation to practice mindfulness during the training. The present pilot study explored whether a sample of mindfulness experts would find useful and recommend a new VR Dialectical Behavioral Therapy (DBT® mindfulness skills training technique and whether they would show any benefit. Forty four participants attending a mindfulness conference put on an Oculus Rift DK2 Virtual Reality helmet and floated down a calm 3D computer generated virtual river while listening to digitized DBT® mindfulness skills training instructions. On subjective questionnaires completed by the participants before and after the VR DBT® mindfulness skills training session, participants reported increases/improvements in state of mindfulness, and reductions in negative emotional states. After VR, participants reported significantly less sadness, anger, and anxiety, and reported being significantly more relaxed. Participants reported a moderate to strong illusion of going inside the 3D computer generated world (i.e., moderate to high "presence" in VR and showed high acceptance of VR as a technique to practice mindfulness. These results show encouraging preliminary evidence of the feasibility and acceptability

User acceptance of mobile commerce: an empirical study in Macau

Science.gov (United States)

Lai, Ivan K. W.; Lai, Donny C. F.

2014-06-01

This study aims to examine the positive and negative factors that can significantly explain user acceptance of mobile commerce (m-commerce) in Macau. A technology acceptance model for m-commerce with five factors is constructed. The proposed model is tested using data collected from 219 respondents. Confirmatory factor analysis is performed to examine the reliability and validity of the model, and structural equation modelling is performed to access the relationship between behaviour intention and each factor. The acceptance of m-commerce is influenced by factors including performance expectancy, social influence, facilitating conditions and privacy concern; while effort expectancy is insignificant in this case. The results of the study are useful for m-commerce service providers to adjust their strategies for promoting m-commerce services. This study contributes to the practice by providing a user technology acceptance model for m-commerce that can be used as a foundation for future research.

The coating of surfaces for use in the nuclear industry

International Nuclear Information System (INIS)

1984-01-01

This Code of Practice provides general advice to designers and others on the factors affecting the choice of coating for use within the nuclear industry. It itemises those design features, which are pertinent to facilitating decontamination and specifies the optimum generic types of coating for a variety of working conditions. Data sheets on commercially available products are included in Section 6 of the Code under the appropriate generic type. Information provided on the data sheets includes a measure of the ease of decontamination of the coating using the accepted method of testing (currently as specified in BS 4247 Part 1) and other nuclear information, where available, i.e. radiation resistance, exhalation rate for radionuclide gases radon and thoron. It also indicates the more important conventional properties of the product. (author)

PAGs - Public perception and acceptance

International Nuclear Information System (INIS)

Quillin, Robert M.

1989-01-01

Full text: While Protective Action Guides or PAGs have been a part of the lexicon of the radiation protection field for several decades, the concept of accepting higher levels of risk under certain situations has not received adequate scrutiny by the general public, the media or elected officials. Consequently there is a question as to how implementation of PAGs would be perceived by the above groups in the event that such implementation became necessary. A personal case in point involves the response of an executive in the food industry. When the concept of selling a food product meeting the PAGs was explained his response was, 'we won't sell a contaminated product, we would dump the unprocessed raw food. Our industry image is that of a natural unadulterated food'. While this may be an isolated view, there is a need to determine what is the perception and consequently what would be the response if PAGs were implemented today. If the response was negative by anyone of the three groups listed previously, then there is an obvious need for a program to assure receptiveness by those concerned. However, this may face formidable obstacles. This is because the terms radiation and radioactive have gained generally negative word associations, e.g. 'deadly' radiation and radioactive 'desert'. The former term was recently heard in a taped presentation at a Museum of Natural History on a completely unrelated subject. The latter term was part of a recent article heading in the Wall Street Journal. Incidentally the article was discussing television. Thus beyond the scientific issues of setting PAGs and the administrative and procedural issues of implementing PAGs there is the issue of society's understanding and acceptance of PAGs. Particularly, how can such understanding and acceptance be achieved in a situation which is associated with an actual or perceived radiation emergency? These are not questions that radiation or agricultural scientists can answer alone. These are

Entrepreneurial Learning a Practical Model from the Creative Industries

Science.gov (United States)

Rae, David

2004-01-01

Explores how entrepreneurial capability and identity are learned in the creative and media industries. This sector is of growing social and economic importance, and the majority of its employment and commercial activity takes place within small businesses. However, entrepreneurship in the creative industries and the related development of…

Best Practices in School-to-Careers: The Automotive Industry.

Science.gov (United States)

National Employer Leadership Council, Washington, DC.

This document highlights the school-to-careers (STC) partnerships connecting workplace experiences to classroom learning to prepare students for successful employment in the automotive industry. First, the current state of the automotive industry is reviewed and the role of STC in addressing automotive service needs is explained. Next, the…

The "general recognition and acceptance" standard of objectivity for good faith in prescribing: legal and medical implications.

Science.gov (United States)

Brushwood, David B

2007-01-01

The United States Court of Appeals for the 4th Circuit has ruled that a jury considering charges of drug trafficking against a pain management physician should be instructed that the defendant's good faith is a defense to the charges. The court rejected a subjective standard of good faith, and instead ruled that the good faith of the defendant must be evaluated from an objective perspective. This objective standard requires that the jury determine whether the defendant was practicing in accordance with the standard generally recognized and accepted in the United States. General recognition and acceptance are determined on a case-by-case basis, within the context of a defendant's practice. Simply because a physician's practice is out of the norm for many physicians does not mean it can't be generally recognized and accepted within the standard of medical practice. Expert witness testimony of pain management physicians will assist juries in the application of this standard for good faith in prescribing.