Measurements of fission yields

International Nuclear Information System (INIS)

Denschlag, H.O.

2000-01-01

After some historical introductory remarks on the discovery of nuclear fission and early fission yield determinations, the present status of knowledge on fission yields is briefly reviewed. Practical and fundamental reasons motivating the pursuit of fission yield measurements in the coming century are pointed out. Recent results and novel techniques are described that promise to provide new interesting insights into the fission process during the next century. (author)

The assessment of the impact of socio-economic factors in accepting cancer using the Acceptance of Illness Scale (AIS).

Science.gov (United States)

Czerw, Aleksandra I; Bilińska, Magdalena; Deptała, Andrzej

2016-01-01

The paper presents the results of examining the level of acceptance of the illness in cancer patients using the Acceptance of Illness Scale (AIS). The study involved cancer patients treated at the Central Clinical Hospital of the Ministry the Interior in Warsaw in 2014. The questionnaire comprised basic demographic questions (socio-economic factors) and the AIS test estimating the level of illness acceptance in patients. For the group of patients in the research group, the arithmetic mean amounted to 27.56 points. The period of time that elapsed between the first cancer diagnosis and the start of the study did not influence the score of accepting illness. The acceptance of illness in patients diagnosed with metastases differed from the acceptance of illness by patients diagnosed with metastatic cancer. Females obtained the average of 29.59 in the AIS test, whereas the average in male patients was 26.17. The patients' age did not impact the AIS test. There were no differences in the AIS test results between a group of people with secondary education and a group of people with higher education. There were no differences in the AIS test results between employed individuals versus pensioners. The inhabitants of cities were characterized by the highest degree of acceptance of their health condition. The lowest degree of acceptance of illness was observed in the group with the lowest average incomes. In the group of married individuals the average degree of acceptance of illness amounted to 27.37 points. The average degree of acceptance of illness in patients that declared themselves as single amounted to 25.75. The average degree of acceptance of illness in the study group was 27.56 points, which is a relatively high level of acceptance of cancer. The main socio-economic factor, which influenced the AIS test results was whether metastases were diagnosed or not. There were no differences between patients in groups where the time that elapsed from the first diagnosis of

The assessment of the impact of socio-economic factors in accepting cancer using the Acceptance of Illness Scale (AIS

Directory of Open Access Journals (Sweden)

Aleksandra I. Czerw

2015-11-01

Full Text Available Aim of the study : The paper presents the results of examining the level of acceptance of the illness in cancer patients using the Acceptance of Illness Scale (AIS. Materials and methods: The study involved cancer patients treated at the Central Clinical Hospital of the Ministry the Interior in Warsaw in 2014. The questionnaire comprised basic demographic questions (socio-economic factors and the AIS test estimating the level of illness acceptance in patients. Results : For the group of patients in the research group, the arithmetic mean amounted to 27.56 points. The period of time that elapsed between the first cancer diagnosis and the start of the study did not influence the score of accepting illness. The acceptance of illness in patients diagnosed with metastases differed from the acceptance of illness by patients diagnosed with metastatic cancer. Females obtained the average of 29.59 in the AIS test, whereas the average in male patients was 26.17. The patients’ age did not impact the AIS test. There were no differences in the AIS test results between a group of people with secondary education and a group of people with higher education. There were no differences in the AIS test results between employed individuals versus pensioners. The inhabitants of cities were characterized by the highest degree of acceptance of their health condition. The lowest degree of acceptance of illness was observed in the group with the lowest average incomes. In the group of married individuals the average degree of acceptance of illness amounted to 27.37 points. The average degree of acceptance of illness in patients that declared themselves as single amounted to 25.75. Conclusions : The average degree of acceptance of illness in the study group was 27.56 points, which is a relatively high level of acceptance of cancer. The main socio-economic factor, which influenced the AIS test results was whether metastases were diagnosed or not. There were no

Yield point of metallic glass

International Nuclear Information System (INIS)

Shimizu, Futoshi; Ogata, Shigenobu; Li, Ju

2006-01-01

Shear bands form in most bulk metallic glasses (BMGs) within a narrow range of uniaxial strain ε y ≅ 2%. We propose this critical condition corresponds to embryonic shear band (ESB) propagation, not its nucleation. To propagate an ESB, the far-field shear stress τ ∞ ∼ Eε y /2 must exceed the quasi-steady-state glue traction τ glue of shear-alienated glass until the glass transition temperature is approached internally due to frictional heating, at which point ESB matures as a runaway shear crack. The incubation length scale l inc necessary for this maturation is estimated to be ∼10 2 nm for Zr-based BMGs, below which sample size-scale shear localization does not happen. In shear-alienated glass, the last resistance against localized shearing comes from extremely fast downhill dissipative dynamics of timescale comparable to atomic vibrations, allowing molecular dynamics (MD) simulations to capture this recovery process which governs τ glue . We model four metallic glasses: a binary Lennard-Jones system, two binary embedded atom potential systems and a quinternary embedded atom system. Despite vast differences in the structure and interatomic interactions, the four MD calculations give ε y predictions of 2.4%, 2.1%, 2.6% and 2.9%, respectively

[Acceptance and mindfulness-based cognitive-behavioral therapies].

Science.gov (United States)

Ngô, Thanh-Lan

2013-01-01

Cognitive behavioral therapy (CBT) is one of the main approaches in psychotherapy. It teaches the patient to examine the link between dysfunctional thoughts and maladaptive behaviors and to re- evaluate the cognitive biases involved in the maintenance of symptoms by using strategies such as guided discovery. CBT is constantly evolving in part to improve its' effectiveness and accessibility. Thus in the last decade, increasingly popular approaches based on mindfulness and acceptance have emerged. These therapies do not attempt to modify cognitions even when they are biased and dysfunctional but rather seek a change in the relationship between the individual and the symptoms. This article aims to present the historical context that has allowed the emergence of this trend, the points of convergence and divergence with traditional CBT as well as a brief presentation of the different therapies based on mindfulness meditation and acceptance. Hayes (2004) described three successive waves in behavior therapy, each characterized by "dominant assumptions, methods and goals": traditional behavior therapy, cognitive therapy and therapies based on mindfulness meditation and acceptance. The latter consider that human suffering occurs when the individual lives a restricted life in order avoid pain and immediate discomfort to the detriment of his global wellbeing. These therapies combine mindfulness, experiential, acceptance strategies with traditional behavior principles in order to attain lasting results. There are significant points of convergence between traditional CBT and therapies based on mindfulness meditation and acceptance. They are both empirically validated, based upon a theoretical model postulating that avoidance is key in the maintenance of psychopathology and they recommend an approach strategy in order to overcome the identified problem. They both use behavioral techniques in the context of a collaborative relationship in order to identify precise problems and to

From motivation to acceptability

DEFF Research Database (Denmark)

Nordfalk, Francisca; Olejaz, Maria; Jensen, Anja M. B.

2016-01-01

Background: Over the past three decades, public attitudes to organ donation have been a subject of numerous studies focusing on donor motivation. Here, we present a fresh approach. We suggest focusing on public acceptability instead of motivation. The point is to understand public attitudes well...

Effects of lactation number, milk yield and milk composition on freezing point of milk of Polish Holstein-Friesian cows

OpenAIRE

Agnieszka Otwinowska-Mindur; Ewa PTAK

2018-01-01

The objective of the study was to assess the influence of lactation number, daily milk yield, somatic cell count and milk composition on the freezing point of milk of Polish Holstein-Friesian cows. The data comprised 3,067,343 test day milk samples collected in 2014 from 865,198 first seven lactations of 714,018 Polish Holstein-Friesian cows, made available by the Polish Federation of Cattle Breeders and Dairy Farmers. The cows calved in 20,043 herds in 2013 and 2014. Four lactation classes w...

Towards integrating acceptance and resistance research : evidence from a telecare case study

NARCIS (Netherlands)

van Offenbeek, Marjolein; Boonstra, Albert; Seo, DongBack

There is wide agreement that acceptance and resistance are crucial factors in information system (IS) adoption. Research has yielded many theories that have focused on either acceptance or resistance, often implicitly assuming that these are opposites. This paper proposes a two-factor view on

E-commerce platform acceptance suppliers, retailers, and consumers

CERN Document Server

Chan, Hing; Yip, Nick

2014-01-01

This book aims to offer a comprehensive overview of the issues facing organizations when deciding whether to accept e-commerce as a platform for business. It provides a detailed evaluation of how the implementation of e-commerce may affect all parties within the supply chain: suppliers, retailers and consumers. It also compares various opportunities and threats of accepting e-commerce in order to conclude whether it might offer access to a new digital era, or whether it is an uncertain option yielding potential pitfalls. This book helps to reveal existing and future consequences of e-commerce acceptance, which are crucial for business decisions and operations in the present and going forward. It therefore provides a unique insight into emerging e-commerce platform acceptance, and is one of the first to provide a holistic perspective of how each party in the supply chain is affected  by e-commerce acceptance. E-commerce is bringing into view more flexible, effective and efficient ways of conducting business a...

Use of cluster analysis and preference mapping to evaluate consumer acceptability of choice and select bovine M. longissimus lumborum steaks cooked to various end-point temperatures.

Science.gov (United States)

Schmidt, T B; Schilling, M W; Behrends, J M; Battula, V; Jackson, V; Sekhon, R K; Lawrence, T E

2010-01-01

Consumer research was conducted to evaluate the acceptability of choice and select steaks from the Longissimus lumborum that were cooked to varying degrees of doneness using demographic information, cluster analysis and descriptive analysis. On average, using data from approximately 155 panelists, no differences (P>0.05) existed in consumer acceptability among select and choice steaks, and all treatment means ranged between like slightly and like moderately (6-7) on the hedonic scale. Individual consumers were highly variable in their perception of acceptability and consumers were grouped into clusters (eight for select and seven for choice) based on their preference and liking of steaks. The largest consumer groups liked steaks from all treatments, but other groups preferred (Pconsumers could be grouped together according to preference, liking and descriptive sensory attributes, (juiciness, tenderness, bloody, metallic, and roasted) to further understand consumer perception of steaks that were cooked to different end-point temperatures.

Acceptability and Feasibility of a Sexual Health Intervention for Young Adult Black Women.

Science.gov (United States)

Montgomery, Tiffany M; Mays, Vickie M; Heilemann, MarySue V; Nyamathi, Adey; Bauermeister, Jose A; Koniak-Griffin, Deborah

2018-05-16

To assess the acceptability and feasibility of S2S, a newly adapted behavior intervention to address high-risk sexual behavior. Pilot randomized controlled trial. The Internet and text messages with no in-person interactions. Eighty-eight Black women, ages 18 to 24 years, were randomly assigned to the intervention or control groups and self-enrolled in the respective text message program. Participants in the intervention group were sent text messages about sexual health, whereas those in the control group were sent text messages about diet and/or exercise. Participants in each group received 24 text messages, including text-only messages, memes, and infopics. Participants in the intervention group also received videos links. All text messages were sent three times per week for 8 weeks. Quantitative methods were used to analyze data from the message and video platform reports. Quantitative and qualitative methods were used to analyze participants' responses to an acceptability and feasibility survey. Overall, the delivery of health promotion text messages was viewed as acceptable and feasible by participants in both groups. Most of the short answer responses from participants were favorable, and responses to the acceptability and feasibility survey yielded a total mean score of 4.01 on a 5-point scale. Results from this study support the idea that evidence-based interventions can be adapted for delivery by text message. This delivery modality is acceptable to young adult Black women and may help decrease barriers that would otherwise prevent them from receiving health promotion messages. Copyright © 2018 AWHONN, the Association of Women’s Health, Obstetric and Neonatal Nurses. Published by Elsevier Inc. All rights reserved.

Yield shear stress model of magnetorheological fluids based on exponential distribution

International Nuclear Information System (INIS)

Guo, Chu-wen; Chen, Fei; Meng, Qing-rui; Dong, Zi-xin

2014-01-01

The magnetic chain model that considers the interaction between particles and the external magnetic field in a magnetorheological fluid has been widely accepted. Based on the chain model, a yield shear stress model of magnetorheological fluids was proposed by introducing the exponential distribution to describe the distribution of angles between the direction of magnetic field and the chain formed by magnetic particles. The main influencing factors were considered in the model, such as magnetic flux density, intensity of magnetic field, particle size, volume fraction of particles, the angle of magnetic chain, and so on. The effect of magnetic flux density on the yield shear stress was discussed. The yield stress of aqueous Fe 3 O 4 magnetreological fluids with volume fraction of 7.6% and 16.2% were measured by a device designed by ourselves. The results indicate that the proposed model can be used for calculation of yield shear stress with acceptable errors. - Highlights: • A yield shear stress model of magnetorheological fluids was proposed. • Use exponential distribution to describe the distribution of magnetic chain angles. • Experimental and predicted results were in good agreement for 2 types of MR

Attenuation of the dynamic yield point of shocked aluminum using elastodynamic simulations of dislocation dynamics.

Science.gov (United States)

Gurrutxaga-Lerma, Beñat; Balint, Daniel S; Dini, Daniele; Eakins, Daniel E; Sutton, Adrian P

2015-05-01

When a metal is subjected to extremely rapid compression, a shock wave is launched that generates dislocations as it propagates. The shock wave evolves into a characteristic two-wave structure, with an elastic wave preceding a plastic front. It has been known for more than six decades that the amplitude of the elastic wave decays the farther it travels into the metal: this is known as "the decay of the elastic precursor." The amplitude of the elastic precursor is a dynamic yield point because it marks the transition from elastic to plastic behavior. In this Letter we provide a full explanation of this attenuation using the first method of dislocation dynamics to treat the time dependence of the elastic fields of dislocations explicitly. We show that the decay of the elastic precursor is a result of the interference of the elastic shock wave with elastic waves emanating from dislocations nucleated in the shock front. Our simulations reproduce quantitatively recent experiments on the decay of the elastic precursor in aluminum and its dependence on strain rate.

Stress relaxation and activation volume at the yield point of cold worked and neutron irradiated copper single crystals

International Nuclear Information System (INIS)

Brunner, D.; Diehl, J.

1979-01-01

The effective activation volume of slip is studied after neutron irradiation in as-grown crystals as well as in predeformed ones by means of stress relaxation tests between 20 K and 200 K. The activation volume corresponding to the initial strain rate is found to be always higher in predeformed crystals than in as-grown ones. During stress relaxation the flow stress tau decreases linearly with ln(-dtau/dt) (indicating a constant activation volume) only in rare cases. Depending on predeformation and temperature several types of deviations from straight lines are observed: monotoneously bent curves, strong scattering of data points not fitting smooth curves or systematic deviations from straight lines at the beginning of relaxation. Accordingly the effective activation volumes and their dependences on stress seem to behave in a strange manner. By the aid of a previously proposed model for the deformation within the yield point elongation the results can be interpreted qualitatively by taking into account the inhomogeneity of slip and work hardening, allowing a more reliable judgement on the real activation volumes, on which a better understanding of the superposition of the two hardening mechanisms involved here can be based. (author)

Modified stress intensity factor as a crack growth parameter applicable under large scale yielding conditions

International Nuclear Information System (INIS)

Yasuoka, Tetsuo; Mizutani, Yoshihiro; Todoroki, Akira

2014-01-01

High-temperature water stress corrosion cracking has high tensile stress sensitivity, and its growth rate has been evaluated using the stress intensity factor, which is a linear fracture mechanics parameter. Stress corrosion cracking mainly occurs and propagates around welded metals or heat-affected zones. These regions have complex residual stress distributions and yield strength distributions because of input heat effects. The authors previously reported that the stress intensity factor becomes inapplicable when steep residual stress distributions or yield strength distributions occur along the crack propagation path, because small-scale yielding conditions deviate around those distributions. Here, when the stress intensity factor is modified by considering these distributions, the modified stress intensity factor may be used for crack growth evaluation for large-scale yielding. The authors previously proposed a modified stress intensity factor incorporating the stress distribution or yield strength distribution in front of the crack using the rate of change of stress intensity factor and yield strength. However, the applicable range of modified stress intensity factor for large-scale yielding was not clarified. In this study, the range was analytically investigated by comparison with the J-integral solution. A three-point bending specimen with parallel surface crack was adopted as the analytical model and the stress intensity factor, modified stress intensity factor and equivalent stress intensity factor derived from the J-integral were calculated and compared under large-scale yielding conditions. The modified stress intensity was closer to the equivalent stress intensity factor when compared with the stress intensity factor. If deviation from the J-integral solution is acceptable up to 2%, the modified stress intensity factor is applicable up to 30% of the J-integral limit, while the stress intensity factor is applicable up to 10%. These results showed that

The Tipping Points of Technology Development

Directory of Open Access Journals (Sweden)

Tauno Kekäle

2014-07-01

Full Text Available The tipping point, the decisive point in time in the competition between old and new, is an interesting phenomenon in physics of today. This aspect in technology acceptance is connected to many business decisions such as technology investments, product releases, resource allocation, sales forecasts and, ultimately, affects the profitability and even survival of a company. The tipping point itself is based on many stochastic and dynamic variables, and the process may at least partly be described as path-dependent. This paper analyses the tipping point from three aspects: (1 product performance, (2 features of the market and infrastructure (including related technologies and human network externalities, and (3 actions of the incumbents (including customer lock-in, systems lock-in, and sustaining innovation. The paper is based on the Bass s-curve idea and the technology trajectory concept proposed by Dosi. Three illustrative cases are presented to make the point of the multiple factors affecting technology acceptance and, thus, the tipping point. The paper also suggests outlines for further research in field of computer simulation.

Risk Acceptance Criteria and/or Decision optimization

DEFF Research Database (Denmark)

Ditlevsen, Ove Dalager

1996-01-01

Acceptance criteria applied in practical risk analysis are recapitulated including the concept of rist profile. Modelling of risk profiles is illustrated on the basis of compound Poisson process models. The current practice of authoritative acceptance criteria formulation is discussed from...... a decision theoretical point of view. It is argued that the phenomenon of risk aversion rather than being of concern to the authority should be of concern to the owner. Finally it is discussed whether there is an ethical problem when formally capitalising human lives with a positive interest rate. Keywords......: Risk acceptance, Risk profile, Compound Poisson model for risk profile, Capitalization of human life, Risk aversion....

Yield stress of alumina-zirconia suspensions

International Nuclear Information System (INIS)

Ramakrishnan, V.; Pradip; Malghan, S.G.

1996-01-01

The yield stress of concentrated suspensions of alumina, zirconia, and mixed alumina-zirconia powders was measured by the vane technique as a function of solids loading, relative amounts of alumina and zirconia, and pH. At the isoelectric point (IEP), the yield stress varied as the fourth power of the solids loading. The relative ratio of alumina and zirconia particles was important in determining the yield stress of the suspension at the IEP. The yield stress of single and mixed suspensions showed a marked variation with pH. The maximum value occurred at or near the IEP of the suspension. The effect of electrical double-layer forces on the yield stress can be described on the basis of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. A normalized yield stress--that is, the ratio of the yield stress at a given pH to the yield stress at the IEP predicted by this model--showed good correlation with experimental data

Case management and quality: have we reached a tipping point?

Science.gov (United States)

Dulworth, Sherrie

2006-01-01

In The Tipping Point, Malcolm Gladwell describes a phenomenon in which a niche market or fad undergoes transformation into mainstream acceptability, resulting in widespread social change. He concludes that a "tipping point" occurs when a series of small events results in a critical mass of acceptance that produces sudden major changes.

Acceptance of illness and satisfaction with life among malaria patients in rivers state, Nigeria.

Science.gov (United States)

Van Damme-Ostapowicz, Katarzyna; Krajewska-Kułak, Elżbieta; Nwosu, Paul J C; Kułak, Wojciech; Sobolewski, Marek; Olszański, Romuald

2014-05-03

Health condition is one of the basic factors affecting satisfaction with life, and the level of illness acceptance. The purpose of the study was to analyse the level of illness acceptance, the level of satisfaction with life among malaria patients, and the level of trust placed in the physician and the nurse. The study employs the method of diagnostic survey based on standardised AIS and SWLS scales, as well as Anderson and Dedrick's PPTS and PNTS scales. The average AIS level was 12 points, while the average level of SwL at the SWLS scale was 16.5 points. The average level of trust in the physician and the nurse amounted to 50.6 points and 51.4 points, respectively. The correlation between the level of illness acceptance and self-evaluated satisfaction with life was statistically significant, with R = 0.56. The marital status influenced the level of illness acceptance with p satisfaction with life with p employment status affected the level of satisfaction with life with p satisfaction with life was low. The majority of respondents trusted their physician and nurse. There is a statistically significant correlation between the level of illness acceptance and the self-evaluated satisfaction with life. The marital status had a statistically significant effect on the acceptance of illness and the satisfaction with life. The individuals who had a job demonstrated higher levels of quality of life and illness acceptance.

Weed biomass and economic yield of wheat (Triticum aestivum) as ...

African Journals Online (AJOL)

Yomi

2012-01-24

154 ... to realize the maximum yield potential of the crop at lower input costs ... only acceptable way for effective weed management in future (Marwat et al., ..... Jarwar AD, Tunio SD, Majeedano HI, Kaisrani MA. (1999). Efficacy.

Smoking Cessation through Acceptance and Commitment Therapy: A Case Report

Directory of Open Access Journals (Sweden)

Ufuk Bal

2015-12-01

Full Text Available Smoking is one of the most common addictions with devastating biopsychosocial consequences. Both medical treatment and pschotherapy are utilized in smoking cessation. Acceptance and commitment therapy holds the notion that smoking cessation rates are determined not so much by the negative affect and withdrawal symptoms per se, but by the avoidant and inflexible responding style. Acceptance and commitment therapy, through targeting the avoidance of internal stimuli and concomitant inflexible responding pattern, has yielded successful results.This article presents application of acceptance and commitment therapy step by step to a chronic smoker who quitted smoking at the end of therapy sessions. [Cukurova Med J 2015; 40(4.000: 841-846

Impact of an acceptance facilitating intervention on diabetes patients' acceptance of Internet-based interventions for depression: a randomized controlled trial.

Science.gov (United States)

Baumeister, H; Nowoczin, L; Lin, J; Seifferth, H; Seufert, J; Laubner, K; Ebert, D D

2014-07-01

To (1) determine diabetes patients' acceptance of Internet-based interventions (IBIs) for depression, to (2) examine the effectiveness of an acceptance facilitating intervention (AFI) and to (3) explore subgroup specific effects. 141 diabetes patients from two inpatient rehabilitation units and one outpatient clinic in Germany were randomly allocated to an intervention (IG) and a no-intervention control group (CG). The IG received an AFI consisting of a personal information session before filling-out a questionnaire on patients' acceptance of IBIs, predictors of acceptance (performance expectancy, effort expectancy, social influence, facilitating conditions, and Internet anxiety) as well as sociodemographic, depression-related and diabetes-related variables. The CG filled out the questionnaire immediately. Patients' acceptance of IBIs was measured with a four-item scale (sum-score ranging from 4 to 20). The CG showed a low (50.7%) to medium (40.8%) acceptance with only 8.5% of all diabetes patients reporting a high acceptance of IBIs for depression. The AFI had no significant effect on acceptance (IG: M=10.55, SD=4.69, n=70; KG: M=9.65, SD=4.27, n=71; d=0.20 [95%-CI: -0.13;0.53]) and the predictors of acceptance. Yet, subgroup analyses yielded a trend for depressed, diabetes-related distressed, female and younger (Internet to profit from the AFI. Diabetes patients show a rather low acceptance toward IBIs for depression. Findings indicate that the AFI is likely to be effective in the subgroup of depressed, diabetes-related distressed, female or younger diabetes patients, but not in the whole target population. Hence, AFIs might need to be tailored to the specific needs of subpopulations. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Discriminant analysis of essay, mathematics/science type of essay, college scholastic ability test, and grade point average as predictors of acceptance to a pre-med course at a Korean medical school.

Science.gov (United States)

Jeong, Geum-Hee

2008-01-01

A discriminant analysis was conducted to investigate how an essay, a mathematics/science type of essay, a college scholastic ability test, and grade point average affect acceptance to a pre-med course at a Korean medical school. Subjects included 122 and 385 applicants for, respectively, early and regular admission to a medical school in Korea. The early admission examination was conducted in October 2007, and the regular admission examination was conducted in January 2008. The analysis of early admission data revealed significant F values for the mathematics/science type of essay (51.64; Pgrade point average (10.66; P=0.0014). The analysis of regular admission data revealed the following F values: 28.81 (Pgrade point average, 27.47 (P<0.0001) for college scholastic ability test, 10.67 (P=0.0012) for the essay, and 216.74 (P<0.0001) for the mathematics/science type of essay. Since the mathematics/science type of essay had a strong effect on acceptance, an emphasis on this requirement and exclusion of other kinds of essays would be effective in subsequent entrance examinations for this premed course.

Rationality, Theory Acceptance and Decision Theory

Directory of Open Access Journals (Sweden)

J. Nicolas Kaufmann

1998-06-01

Full Text Available Following Kuhn's main thesis according to which theory revision and acceptance is always paradigm relative, I propose to outline some possible consequences of such a view. First, asking the question in what sense Bayesian decision theory could serve as the appropriate (normative theory of rationality examined from the point of view of the epistemology of theory acceptance, I argue that Bayesianism leads to a narrow conception of theory acceptance. Second, regarding the different types of theory revision, i.e. expansion, contraction, replacement and residuals shifts, I extract from Kuhn's view a series of indications showing that theory replacement cannot be rationalized within the framework of Bayesian decision theory, not even within a more sophisticated version of that model. Third, and finally, I will point to the need for a more comprehensive model of rationality than the Bayesian expected utility maximization model, the need for a model which could better deal with the different aspects of theory replacement. I will show that Kuhn's distinction between normal and revolutionary science gives us several hints for a more adequate theory of rationality in science. I will also show that Kuhn is not in a position to fully articulate his main ideas and that he well be confronted with a serious problem concerning collective choice of a paradigm.

Spatial Sampling of Weather Data for Regional Crop Yield Simulations

Science.gov (United States)

Van Bussel, Lenny G. J.; Ewert, Frank; Zhao, Gang; Hoffmann, Holger; Enders, Andreas; Wallach, Daniel; Asseng, Senthold; Baigorria, Guillermo A.; Basso, Bruno; Biernath, Christian;

Acceptance, acceptability, and energy consensus. Can there still be a consensus on nuclear energy?

International Nuclear Information System (INIS)

Renn, O.

1995-01-01

The question of public acceptance of nuclear energy has for years fueled the discussion on social issues. Denial of this acceptance has without doubt delayed, if not altogether prevented, the further development of nuclear energy during the past two decades. Public perception of nuclear energy is still dominated by resent. In the eyes of the German public it is a dangerous and unacceptable technology that deserves to be substituted as soon as possible. The necessity of this is widely agreed, the only unsettled question being how fast it must happen. Sociologists are often reproached for having only created the acceptance problems they purport to analyse. All sociology can do is describe our reality and make suggestions how to cope with social problems more effectively. The sociologist is the herald of social reality: he should neither gloss over nor dramatise things but rather present a real picture of what is happening. With this premise in mind the author attempts to point out possibilities of and limits to a consensus on the valuation of energy systems, particularly that of nuclear energy. (orig./UA) [de

Is Coersive Treatment of Offenders Morally Acceptable?

DEFF Research Database (Denmark)

Ryberg, Jesper

2015-01-01

Is it morally acceptable to instigate criminal offenders to participate in rehabilitative treatment by offering treatment in return for early release from prison? Some theorists have supported such treatment schemes by pointing to the beneficial consequences that follow from the treatment. Others...

Relationship between Yield Point Phenomena and the Nanoindentation Pop-in Behavior of Steel

Energy Technology Data Exchange (ETDEWEB)

Ahn, T.-H. [Seoul National University; Oh, C.-S. [Korean Institute of Materials Science; Lee, K. [Technical Research Laboratories, Republic of Korea; George, Easo P [ORNL; Han, H. N. [Seoul National University

2012-01-01

Pop-ins on nanoindentation load-displacement curves of a ferritic steel were correlated with yield drops on its tensile stress-strain curves. To investigate the relationship between these two phenomena, nanoindentation and tensile tests were performed on annealed specimens, prestrained specimens, and specimens aged for various times after prestraining. Clear nanoindentation pop-ins were observed on annealed specimens, which disappeared when specimens were indented right after the prestrain, but reappeared to varying degrees after strain aging. Yield drops in tensile tests showed similar disappearance and appearance, indicating that the two phenomena, at the nano- and macro-scale, respectively, are closely related and influenced by dislocation locking by solutes (Cottrell atmospheres).

Consumer detection and acceptability of reduced-sodium bread.

Science.gov (United States)

La Croix, Kimberly W; Fiala, Steven C; Colonna, Ann E; Durham, Catherine A; Morrissey, Michael T; Drum, Danna K; Kohn, Melvin A

2015-06-01

Bread is the largest contributor of Na to the American diet and excess Na consumption contributes to premature death and disability. We sought to determine the Na level at which consumers could detect a difference between reduced-Na bread and bread with typical Na content, and to determine if consumer sensory acceptability and purchase intent differed between reduced-Na bread and bread with typical Na content. Difference testing measured ability to detect differences in control bread and reduced-Na bread using two-alternative forced choice testing. Acceptability was measured using a nine-point hedonic scale and purchase intent was measured using a five-point purchase intent scale. Difference and acceptability testing were conducted in Portland, OR, USA in January 2013. Eighty-two consumers participated in difference testing and 109 consumers participated in acceptability testing. Consumers did not detect a difference in saltiness between the control bread and the 10 % reduced-Na bread, but did detect a difference between the control bread and bread reduced in Na content by 20 % and 30 %. Na reductions had no effect on consumer acceptability of sensory characteristics, including overall liking, appearance, aroma, flavour, sweetness, salt level and texture, or purchase intent. Reducing Na levels by up to 30 % in the sandwich bread tested did not affect consumer liking or purchase intent of the product. These results support national recommendations for small, incremental Na reductions in the food supply over time and assure bread manufacturers that sensory characteristics and consumer purchase intent of their products will be preserved after Na reductions occur.

[Yield and chemical composition of the vegetal parts of the amaranth (Amaranthus hypochondriacus, L.) at different physiological stages].

Science.gov (United States)

Alfaro, M A; Martínez, A; Ramírez, R; Bressani, R

1987-03-01

The genus Amaranthus comprises species which, consumed as vegetables, provide essential nutrients to man; they also have a high acceptability among the population. These two factors justify the need to increase their cultivation. Therefore, the purpose of this research was to establish the most adequate physiological state of maturity, to harvest the leaves for human consumption. The field experiment utilized a randomized block design with three treatments and eight replications. These treatments consisted in harvesting the plants at 25, 40 and 60 days after emergence of the seedlings, samples which served to evaluate: plant height, number of leaves, leaf surface area, gross weight (leaves and stems), net weight (leaves), green matter and dry matter yield, as well as protein. The chemical composition of the harvested material was evaluated also in terms of moisture, protein, crude fiber, ether extract, ash, carbohydrate, calcium, phosphorus, iron, beta-carotene and oxalates. The results obtained in the agronomic study were subjected to analysis of variance for the respective design, with significant differences found between treatments for all the variables studied. In its turn, the results of the chemical analysis were analyzed by a completely randomized design, with significant differences obtained for most of the variables studied, except for ether extract, calcium, iron and oxalates. From the nutritional point of view, the first harvest was the most acceptable due to the chemical composition of the plant, in particular protein (29.5%), beta-carotene (33.7 mg%), calcium (2,356.1 mg%), phosphorus (759.1 mg%) and due to its low crude fiber content, only 11.1 g%. It did not occur so from the agronomic point of view, since during this stage, very low yields of green matter (575.9 kg/ha), dry matter (66.6 kg/ha) and protein (19.7 kg/ha) were obtained. At the second harvest, besides obtaining adequate yields of green matter (6,530.4 kg/ha), dry matter (681.8 kg

Offer acceptance practices and geographic variability in allocation model for end-stage liver disease at transplant.

Science.gov (United States)

Wey, Andrew; Pyke, Joshua; Schladt, David P; Gentry, Sommer E; Weaver, Tim; Salkowski, Nicholas; Kasiske, Bertram L; Israni, Ajay K; Snyder, Jon J

2018-04-01

Offer acceptance practices may cause geographic variability in allocation Model for End-Stage Liver Disease (aMELD) score at transplant and could magnify the effect of donor supply and demand on aMELD variability. To evaluate these issues, offer acceptance practices of liver transplant programs and donation service areas (DSAs) were estimated using offers of livers from donors recovered between January 1, 2016, and December 31, 2016. Offer acceptance practices were compared with liver yield, local placement of transplanted livers, donor supply and demand, and aMELD at transplant. Offer acceptance was associated with liver yield (odds ratio, 1.32; P offer acceptance (r = 0.09; P = 0.50). Additionally, the association between DSA-level donor-to-candidate ratios and aMELD at transplant did not change after adjustment for offer acceptance. The average squared difference in median aMELD at transplant across DSAs was 24.6; removing the effect of donor-to-candidate ratios reduced the average squared differences more than removing the effect of program-level offer acceptance (33% and 15% reduction, respectively). Offer acceptance practices and donor-to-candidate ratios independently contributed to geographic variability in aMELD at transplant. Thus, neither offer acceptance nor donor-to-candidate ratios can explain all of the geographic variability in aMELD at transplant. Liver Transplantation 24 478-487 2018 AASLD. © 2018 by the American Association for the Study of Liver Diseases.

[Accepted Manuscript] Annual Crop Yield Variation, Child Survival and Nutrition among Subsistence Farmers in Burkina Faso.

OpenAIRE

Belesova, K.; Gasparrini, A.; Sié, A.; Sauerborn, R.; Wilkinson, P.

2017-01-01

Whether year to year variation in crop yields affects the nutrition, health, and survival of subsistence farming populations is relevant to the understanding of the potential impacts of climate change. However, the empirical evidence is limited. We examined the association of child survival with inter-annual variation in food crop yield and middle-upper arm circumference (MUAC) in a subsistence farming population of rural Burkina Faso. The study was of 44,616 children < 5 years of age incl...

ELISA Cut-off Point for the Diagnosis of Human Brucellosis; a Comparison with Serum Agglutination Test

Directory of Open Access Journals (Sweden)

Anahita Sanaei Dashti

2012-03-01

Full Text Available Background: Brucellosis is a world-wide disease, which has a diverse clinical manifestation, and its diagnosis has to be proven by laboratory data. Serum agglutination test (SAT is the most-widely used test for diagnosing brucellosis. The enzyme linked immunosorbent assay (ELISA can also determine specific antibody classes against brucella. It is a sensitive, simple and rapid test, which could be an acceptable alternative to SAT with fewer limitations, however, like any other new test it should be further evaluated and standardized for various populations. This study was planned to determine an optimal cut-off point, for ELISA which would offer maximum sensitivity and specificity for the test when compared to SAT.Methods: Four hundred and seven patients with fever and other compatible symptoms of brucellosis were enrolled in the study. Serum agglutination test, 2-Mercaptoethanol test, and ELISA were performed on their sera. Results: The cut-off point of 53 IU/ml of ELISA-IgG yielded the maximal sensitivity and specificity comparing to the other levels of ELISA-IgG, and was considered the best cut off-point of ELISA-IgG to diagnose acute brucellosis. At this cut-off, the sensitivity, specificity, positive predictive value, negative predictive value, positive likelihood ratio, and negative likelihood ratio were 84.09%, 85.38%, 62.20, 94.90, 5.75, 0.18, respectively.Conclusion: The best cut-off point of ELISA-IgG is 53 IU/ml, which yields the maximal sensitivity and specificity to diagnose acute brucellosis.

The lower yield point of InP and GaAs

International Nuclear Information System (INIS)

Siethoff, H.

1987-01-01

A study of the strain-rate and temperature dependence of the lower yield stress (τ ly ) in undoped InP and of the strain-rate dependence of τ ly in undoped and Zn-doped GaAs is reported. The deformation along (123) orientation was carried out in compression at constant strain rates ranging from 10 -5 to 10 -2 s -1 . The temperature range extended from 540 to 780 0 C. The activation energy and stress exponent of the dislocation velocity were calculated. Experiments have shown that τ ly of InP depends on temperature and strain rate in a manner similar to other semiconductors like Si and InSb, whereas τ ly of GaAs shows an unusual strain-rate dependence

Power Trip Set-points of Reactor Protection System for New Research Reactor

International Nuclear Information System (INIS)

Lee, Byeonghee; Yang, Soohyung

2013-01-01

This paper deals with the trip set-point related to the reactor power considering the reactivity induced accident (RIA) of new research reactor. The possible scenarios of reactivity induced accidents were simulated and the effects of trip set-point on the critical heat flux ratio (CHFR) were calculated. The proper trip set-points which meet the acceptance criterion and guarantee sufficient margins from normal operation were then determined. The three different trip set-points related to the reactor power are determined based on the RIA of new research reactor during FP condition, over 0.1%FP and under 0.1%FP. Under various reactivity insertion rates, the CHFR are calculated and checked whether they meet the acceptance criterion. For RIA at FP condition, the acceptance criterion can be satisfied even if high power set-point is only used for reactor trip. Since the design of the reactor is still progressing and need a safety margin for possible design changes, 18 MW is recommended as a high power set-point. For RIA at 0.1%FP, high power setpoint of 18 MW and high log rate of 10%pp/s works well and acceptance criterion is satisfied. For under 0.1% FP operations, the application of high log rate is necessary for satisfying the acceptance criterion. Considering possible decrease of CHFR margin due to design changes, the high log rate is suggested to be 8%pp/s. Suggested trip set-points have been identified based on preliminary design data for new research reactor; therefore, these trip set-points will be re-established by considering design progress of the reactor. The reactor protection system (RPS) of new research reactor is designed for safe shutdown of the reactor and preventing the release of radioactive material to environment. The trip set point of RPS is essential for reactor safety, therefore should be determined to mitigate the consequences from accidents. At the same time, the trip set-point should secure margins from normal operational condition to avoid

Single and multispecies reference points for Baltic fish stocks

DEFF Research Database (Denmark)

Gislason, Henrik

1999-01-01

reference points. Management advice based on biomass reference points will also differ. In the single species situation the combinations of cod and pelagic fishing effort for which the equilibrium spawning- stock biomass of the three species is above the biomass reference points forms a rectangular area......Single and multispecies models are used to examine the effect of species interaction on biological reference points for cod, herring, and sprat in the Baltic. The results demonstrate that reference points are different in single and multispecies contexts. Reference points for fishing mortality...... based on single-species yield and SSB calculations are difficult to use when natural mortality depends on the absolute abundance of the predators and their alternative prey. Reference points based on maximizing total yield from the system may lead to impractical results when species interact...

Conversion of fracture toughness testing values from small scale three point bending test specimens to small scale yielding state (SSY) by elastic-plastic stress analysis

International Nuclear Information System (INIS)

Ikonen, K.

1993-07-01

The report describes the work performed for achieving readiness to calculate fracture toughness dependence on dimension effects and loading conditions in fracture test specimens and real structures. In the report two- and three-dimensional computer codes developed and calculational methods applied are described. One of the main goals is to converse fracture toughness from small scale three point bending test specimens to case of a depth crack in plane strain i.e. to small scale yielding state (SSY) by numerical elastic-plastic stress analysis. Thickness effect of a test specimens and effect of a crack depth are separately investigated. Tests of three point bending specimens with and without sidegrooves and curved crack front are numerically simulated and experimental and computed results are compared. J-integral is calculated along crack front and also from force-deflection dependence of the beam. For the analyses the computing system was thoroughly automatized. Measuring capacity of three point bending test specimens was tried to evaluate. (orig.) (7 refs., 54 figs.)

Acceptable respiratory protection program and LASL respirator research

International Nuclear Information System (INIS)

Skaggs, B.J.

1979-01-01

A short history is presented on the LASL Respiratory Protection Training Programs. Then a discussion is given on the major points of an acceptable respiratory protection program utilizing the points required by the Occupational, Safety, and Health Administration (OSHA) Regulation 29 CFR 1910.134. Contributions to respirator research are reviewed. Discussion is presented under the following section headings: program administration; respirator selection; respirator use; fitting and training; respirator maintenance; medical clearance and surveillance; special problems; program evaluation; and documentation

The Acceptance Strategy for Nuclear Power Plant In Indonesia

Science.gov (United States)

Suhaemi, Tjipta; Syaukat, Achmad

2010-06-01

THE ACCEPTANCE STRATEGY FOR NUCLEAR POWER PLANT IN INDONESIA. Indonesia has planned to build nuclear power plants. Some feasibility studies have been conducted intensively. However, the processes of NPP introduction are still uncertain. National Energy Plan in Indonesia, which has been made by some governmental agencies, does not yet give positive impact to the government decision to construct the nuclear power plant (NPP). This paper discusses the process of NPP introduction in Indonesia, which has been colored with debate of stakeholder and has delayed decision for go-nuclear. The technology paradigm is used to promote NPP as an alternative of reliable energy resources. This paradigm should be complemented with international politic-economic point of view. The international politic-economic point of view shows that structural powers, consisting of security, production, finance, and knowledge structures, within which the NPP is introduced, have dynamic characteristics. The process of NPP introduction in Indonesia contains some infrastructure development (R&D, legislation, regulation, energy planning, site study, public acceptance efforts, etc), but they need a better coherent NPP implementation program and NPP Acceptance Program. Strategic patterns for NPP acceptance described in this paper are made by considering nuclear regulation development and the interest of basic domestic participation. The first NPP program in Indonesia having proven technology and basic domestic participation is and important milestone toward and optimal national energy-mix.

Heritability studies of yield and yield associated traits in bread wheat

International Nuclear Information System (INIS)

Laghari, K.A.; Sial, M.A.; Arain, M.A.; Mirbahar, A.A.; Pirzada, A.; Mancrio, S.M.; Dahot, M.U.

2010-01-01

Heritability studies provide valid information about the traits that are transmitted from parents to offspring and also to the successive generations. Such studies help plant breeders to predict a successful cross with high heritability transmission to the progeny and thus are useful in the incorporation of characters into the offspring. Heritability study was conducted in F5 segregating generation of a cross between HT5 (female) and HT 37 (male) of bread wheat. The genetic parameters calculated were genetic variance (Vg,), environmental variance (Ve) and heritability percentage in broad sense (h2%), genetic advance (GA) and heritability coefficient (H). The highest heritability was observed for spike length (79.3%), number of grains per spike (54.5%) and main spike yield (69.5%) associated with high genetic advance (2.8, 22.8 and 1.5 respectively). Moderate to high heritability were recorded for peduncle length (48.75%) and number of grains per spikelet (47.2%) which associated with high genetic advance (2.3 and 0.68 respectively). However awn length and plant height had shown acceptable heritability values. The present finding suggests that most of the yield associated traits have been successfully transmitted. The information generated will be helpful for better understanding and selection of suitable, desirable material especially in advance generations. (author)

31 CFR 356.21 - How are awards at the high yield or discount rate calculated?

Science.gov (United States)

2010-07-01

... discount rate calculated? 356.21 Section 356.21 Money and Finance: Treasury Regulations Relating to Money... high yield or discount rate calculated? (a) Awards to submitters. We generally prorate bids at the highest accepted yield or discount rate under § 356.20(a)(2) of this part. For example, if 80.15% is the...

Zero-point oscillations, zero-point fluctuations, and fluctuations of zero-point oscillations

International Nuclear Information System (INIS)

Khalili, Farit Ya

2003-01-01

Several physical effects and methodological issues relating to the ground state of an oscillator are considered. Even in the simplest case of an ideal lossless harmonic oscillator, its ground state exhibits properties that are unusual from the classical point of view. In particular, the mean value of the product of two non-negative observables, kinetic and potential energies, is negative in the ground state. It is shown that semiclassical and rigorous quantum approaches yield substantially different results for the ground state energy fluctuations of an oscillator with finite losses. The dependence of zero-point fluctuations on the boundary conditions is considered. Using this dependence, it is possible to transmit information without emitting electromagnetic quanta. Fluctuations of electromagnetic pressure of zero-point oscillations are analyzed, and the corresponding mechanical friction is considered. This friction can be viewed as the most fundamental mechanism limiting the quality factor of mechanical oscillators. Observation of these effects exceeds the possibilities of contemporary experimental physics but almost undoubtedly will be possible in the near future. (methodological notes)

Wheat yield dynamics: a structural econometric analysis.

Science.gov (United States)

Sahin, Afsin; Akdi, Yilmaz; Arslan, Fahrettin

2007-10-15

In this study we initially have tried to explore the wheat situation in Turkey, which has a small-open economy and in the member countries of European Union (EU). We have observed that increasing the wheat yield is fundamental to obtain comparative advantage among countries by depressing domestic prices. Also the changing structure of supporting schemes in Turkey makes it necessary to increase its wheat yield level. For this purpose, we have used available data to determine the dynamics of wheat yield by Ordinary Least Square Regression methods. In order to find out whether there is a linear relationship among these series we have checked each series whether they are integrated at the same order or not. Consequently, we have pointed out that fertilizer usage and precipitation level are substantial inputs for producing high wheat yield. Furthermore, in respect for our model, fertilizer usage affects wheat yield more than precipitation level.

Optimizing Probability of Detection Point Estimate Demonstration

Science.gov (United States)

Koshti, Ajay M.

2017-01-01

Probability of detection (POD) analysis is used in assessing reliably detectable flaw size in nondestructive evaluation (NDE). MIL-HDBK-18231and associated mh18232POD software gives most common methods of POD analysis. Real flaws such as cracks and crack-like flaws are desired to be detected using these NDE methods. A reliably detectable crack size is required for safe life analysis of fracture critical parts. The paper provides discussion on optimizing probability of detection (POD) demonstration experiments using Point Estimate Method. POD Point estimate method is used by NASA for qualifying special NDE procedures. The point estimate method uses binomial distribution for probability density. Normally, a set of 29 flaws of same size within some tolerance are used in the demonstration. The optimization is performed to provide acceptable value for probability of passing demonstration (PPD) and achieving acceptable value for probability of false (POF) calls while keeping the flaw sizes in the set as small as possible.

A Systematic Review of Point of Care Testing for Chlamydia trachomatis, Neisseria gonorrhoeae, and Trichomonas vaginalis

Directory of Open Access Journals (Sweden)

Sasha Herbst de Cortina

2016-01-01

Full Text Available Objectives. Systematic review of point of care (POC diagnostic tests for sexually transmitted infections: Chlamydia trachomatis (CT, Neisseria gonorrhoeae (NG, and Trichomonas vaginalis (TV. Methods. Literature search on PubMed for articles from January 2010 to August 2015, including original research in English on POC diagnostics for sexually transmitted CT, NG, and/or TV. Results. We identified 33 publications with original research on POC diagnostics for CT, NG, and/or TV. Thirteen articles evaluated test performance, yielding at least one test for each infection with sensitivity and specificity ≥90%. Each infection also had currently available tests with sensitivities <60%. Three articles analyzed cost effectiveness, and five publications discussed acceptability and feasibility. POC testing was acceptable to both providers and patients and was also demonstrated to be cost effective. Fourteen proof of concept articles introduced new tests. Conclusions. Highly sensitive and specific POC tests are available for CT, NG, and TV, but improvement is possible. Future research should focus on acceptability, feasibility, and cost of POC testing. While pregnant women specifically have not been studied, the results available in nonpregnant populations are encouraging for the ability to test and treat women in antenatal care to prevent adverse pregnancy and neonatal outcomes.

A large acceptance, high-resolution detector for rare K{sup +}-decay experiments

Energy Technology Data Exchange (ETDEWEB)

Appel, R.; Atoyan, G.S.; Bassalleck, B.; Battiste, E.; Bergman, D.R.; Boesiger, K.; Brown, D.N.; Castillo, V.; Cheung, N.; Dhawan, S.; Do, H.; Egger, J.; Eilerts, S.W.; Felder, C.; Fischer, H.; Gach, H.M.; Giles, R.; Gninenko, S.N.; Herold, W.D.; Hotmer, J.E.; Issakov, V.V.; Karavichev, O.V.; Kaspar, H.; Kraus, D.E.; Lazarus, D.M. E-mail: lazarus@bnl.gov; Lebedev, V.A.; Leipuner, L.; Lichard, P.; Lowe, J.; Lozano, J.; Lu, T.; Ma, H.; Magurno, B.; Majid, W.; Menzel, W.; Miller, C.S.; Nickelson, M.; Ober, I.; Pile, P.H.; Pislak, S.; Poblaguev, A.A.; Pomianowski, P.; Postoev, V.E.; Proskurjakov, A.L.; Rehak, P.; Robmann, P.; Schmid, B.; Sher, A.; Sher, Aleksey; Shunko, E.; Steiner, S.; Stever, T.L.; Stotzer, R.W.; Suhov, V.V.; Thompson, J.A.; Truoel, P. E-mail: truoel@phyzik.unizh.ch; Valine, C.; Weyer, H.; Wolfe, D.M.; Zeller, M.E

2002-03-01

The detector of the E865-collaboration at the Brookhaven-AGS described here combines a magnetic spectrometer for the charged decay products of 6 GeV/c K{sup +} with excellent electromagnetic calorimetry and efficient particle identification for electrons and muons. Its high-resolution, large acceptance and high rate capability made it well suited for the study of extremely rare or forbidden decays with multi-leptonic final states such as K{sup +}{yields}{pi}{sup +}{mu}{sup +}e{sup -}, K{sup +}{yields}{pi}{sup +}l{sup +}l{sup -}, K{sup +}{yields}l{sup +}{nu}{sub l}e{sup -}e{sup +} and K{sup +}{yields}{pi}{sup +}{pi}{sup -}e{sup +}{nu}{sub e} down to branching ratios below 10{sup -11} in an intense K{sup +} beam ({approx}10{sup 8} per AGS spill)

An equivalence study of interview platform: Does videoconference technology impact medical school acceptance rates of different groups?

Science.gov (United States)

Ballejos, Marlene P; Oglesbee, Scott; Hettema, Jennifer; Sapien, Robert

2018-02-14

Web-based interviewing may be an effective element of a medical school's larger approach to promotion of holistic review, as recommended by the Association of American Medical Colleges, by facilitating the feasibility of including rural and community physicians in the interview process. Only 10% of medical schools offer videoconference interviews to applicants and little is known about the impact of this interview modality on the admissions process. This study investigated the impact of overall acceptance rates using videoconference interviews and face-to-face interviews in the medical school selection process using an equivalence trial design. The University of New Mexico School of Medicine integrated a videoconferencing interview option for community and rural physician interviewers in a pseudo-random fashion during the 2014-2016 admissions cycles. Logistic regression was conducted to examine whether videoconference interviews impacted acceptance rates or the characteristics of accepted students. Demographic, admissions and diversity factors were analyzed that included applicant age, MCAT score, cumulative GPA, gender, underrepresented in medicine, socioeconomic status and geographic residency. Data from 752 interviews were analyzed. Adjusted rates of acceptance for face-to-face (37.0%; 95% CI 28.2, 46.7%) and videoconference (36.1%; 95% CI 17.8, 59.5%) interviews were within an a priori ± 5% margin of equivalence. Both interview conditions yielded highly diverse groups of admitted students. Having a higher medical college admission test score, grade point average, and self-identifying as disadvantaged increased odds of admission in both interview modalities. Integration of the videoconference interview did not impact the overall acceptance of a highly diverse and qualified group of applicants, and allowed rural and community physicians to participate in the medical school interview process as well as allowed campus faculty and medical student committee members

High yielding rice mutants for West Bengal

International Nuclear Information System (INIS)

Debnath, A.R.; Sen, S.

1980-01-01

Four high yielding mutants with specific genetic corrections of the simply inherited characters were developed from IR-8 through X-irradiation. Recurrent selections of the promising isolates were made under diverse agro-climatic conditions in Winter and Summer seasons of West Bengal. The isolates CNM 6 and CNM 25 belonging to early maturity group and CNM 20 and CNM 31, to mid-early maturity group were finally selected at X 5 generation on the basis of their resistance qualities, maturity period and grain yield. They were evaluated upto X 10 qeneration at multi-locations as Pre-release and Minikit Varieties at State level. They were also placed at the National Screening Nursery (NSN) for screening against multiple diseases and pests at the National level. CNM 6 is reported to be promising in IRTP nurseries. It is reported that CNM 25 (IET 5646) ranked 2nd on the basis of average grain yield, CNM 20 (IET 5937) and CNM 31 (IET 5936) were resistant to diseases and with yield comparable to Jaya. These four productive mutants of superior types are widely accepted. CNM 6 is recommended for cultivation in Bankura and Birbhum districts and CNM 25 and CNM 31 in the different agro-climatic zones of West Bengal. (author)

Wheat-yield response to irrigation and nitrogen

International Nuclear Information System (INIS)

Kirda, C.; Derici, R.; Kanber, R.; Yazar, A.; Koc, M.; Barutcular, C.

2000-01-01

Wheat-yield responses to the application of different rates of N fertilizer, under irrigated and rainfed conditions, were evaluated over four growing seasons. Nitrogen applied at tillering was utilized more effectively with proportionately less residual in the soil compared to that applied at planting. Subsequent crops of maize or cotton were positively affected by residual fertilizer N. Volatilization and leaching losses of applied N were small. Crop-water consumption showed strong positive associations with N rate. No wheat-grain-yield benefits accrued from irrigation, although straw yields were increased. Tiller production increased with N-fertilizer usage, however, tiller survival decreased at high N and was highest at 160 kg N ha -1 . Higher N rates produced higher stomatal conductance, increased rates of CO 2 assimilation and higher water-use efficiency. The CERES-Wheat growth-simulation model predicted rather closely the progress of dry-matter production, leaf area index, seasonal evapotranspiration, phenological development and of many other plant-growth attributes. The data indicated that the rate of 160 kg N ha -1 , which is commonly used by the farmers of the region, is acceptable, not only for optimum grain yields but also to minimize the risks of leaching NO 3 - to groundwater. (author)

Efficient Return Algorithms For Associated Plasticity With Multiple Yield Planes

DEFF Research Database (Denmark)

Clausen, Johan Christian; Damkilde, Lars; Andersen, Lars

2006-01-01

of such criteria. The return formulae are in closed form and no iteration is required. The method accounts for three types of stress return: Return to a single yield plane, to a discontinuity line at the intersection of two yield planes and to a discontinuity point at the intersection between three or more yield...... planes. The infinitesimal and the consistent elastoplastic constitutive matrix are calculated for each type of stress return, as are the conditions to ascertain which type of return is required. The method is exemplified with the Mohr-Coulomb yield criterion....

Predicting nurses' use of healthcare technology using the technology acceptance model: an integrative review.

Science.gov (United States)

Strudwick, Gillian

2015-05-01

The benefits of healthcare technologies can only be attained if nurses accept and intend to fully use them. One of the most common models utilized to understand user acceptance of technology is the Technology Acceptance Model. This model and modified versions of it have only recently been applied in the healthcare literature among nurse participants. An integrative literature review was conducted on this topic. Ovid/MEDLINE, PubMed, Google Scholar, and CINAHL were searched yielding a total of 982 references. Upon eliminating duplicates and applying the inclusion and exclusion criteria, the review included a total of four dissertations, three symposium proceedings, and 13 peer-reviewed journal articles. These documents were appraised and reviewed. The results show that a modified Technology Acceptance Model with added variables could provide a better explanation of nurses' acceptance of healthcare technology. These added variables to modified versions of the Technology Acceptance Model are discussed, and the studies' methodologies are critiqued. Limitations of the studies included in the integrative review are also examined.

Yields and spectroscopy of radioactive isotopes at LOHENGRIN and ISOLDE

CERN Document Server

Köster, U

1999-01-01

Yields of radioactive nuclei were measured at two facilities: the recoil separator LOHENGRIN at the Institut Laue Langevin in Grenoble and the on-line isotope separator ISOLDE at CERN in Geneva. At LOHENGRIN the yields of light charged particles were measured from thermal neutron induced ternary fission of several actinide targets: 233U, 235U, 239Pu, 241Pu and 245Cm. Thin targets are brought into a high neutron flux. The produced nuclei leave these with the recoil obtained in the fission reaction. They are measured at different energies and ionic charge states. After corrections for the experimental acceptance, the time behaviour of the fission rate and the ionic charge fraction, the yields are integrated over the kinetic energy distribution. Comparing these yields with the predictions of various ternary fission models shows that the most abundant nuclides are well reproduced. On the other hand the models overestimate significantly the production of more "exotic" nuclides with an extreme N/Z ratio. Therefore ...

Measure of the e+e-{yields}bb Cross Section at the LEP Energies; Medida de la seccion eficaz e''+e''-{yields}bb a las Energias de LEP

Energy Technology Data Exchange (ETDEWEB)

Arce Dubois, P

1992-07-01

In the present work I analyse the data collected during 1990 by the L3 detector, situated in the electron-positron collider LEP. After selecting the events e''+e''-{yields} bb through their semileptonic decays into muons, I calculate the cross section for the process e''+e''- {yields} bb at different energy points around the mass of the vectorial boson Z, and I measure some parameters of the Standard Model, namely, the Br(b{yields}{mu} ),{gamma}{sub z}n-{yields}bb/{gamma}{sub z}n{yields}had and {gamma}{sub z}n{yields}bb{gamma}{sub z}n{yields}e''+e''-. (Author) 26 refs.

Investigation of the yield process by deformation luminescence of X-ray irradiated KCl:Ca2+

International Nuclear Information System (INIS)

Nakamura, S.; Ida, K.; Ohgaku, T.

2011-01-01

It is found that deformation luminescence gives us information about the microscopic yield process of X-ray irradiated KCl:Ca 2+ . The stress-strain curve has a macroscopic yield point. But we find that luminescence appears to start before the macroscopic yield. This means that dislocation begin to move before the macroscopic yield because deformation luminescence is attributed to radiation-induced dislocation motion. The beginning of luminescence is considered to be the microscopic yield. Investigating the dependence of microscopic yield stress on strain rate and impurity concentration gives us additional information. The activation volume obtained from the dependence of microscopic yield stress on strain rate is comparable to the value estimated from the concentration of impurity. Then the dislocation starts to move overcoming impurity-vacancy dipoles as obstacles to dislocation motion. The dislocation density starts to increase at the microscopic yield point and then sharply increases to the macroscopic yield.

Amplitude Models for Discrimination and Yield Estimation

Energy Technology Data Exchange (ETDEWEB)

Phillips, William Scott [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-09-01

This seminar presentation describes amplitude models and yield estimations that look at the data in order to inform legislation. The following points were brought forth in the summary: global models that will predict three-component amplitudes (R-T-Z) were produced; Q models match regional geology; corrected source spectra can be used for discrimination and yield estimation; three-component data increase coverage and reduce scatter in source spectral estimates; three-component efforts must include distance-dependent effects; a community effort on instrument calibration is needed.

Least fixed points revisited

NARCIS (Netherlands)

J.W. de Bakker (Jaco)

1975-01-01

textabstractParameter mechanisms for recursive procedures are investigated. Contrary to the view of Manna et al., it is argued that both call-by-value and call-by-name mechanisms yield the least fixed points of the functionals determined by the bodies of the procedures concerned. These functionals

WE-B-304-00: Point/Counterpoint: Biological Dose Optimization

International Nuclear Information System (INIS)

2015-01-01

The ultimate goal of radiotherapy treatment planning is to find a treatment that will yield a high tumor control probability (TCP) with an acceptable normal tissue complication probability (NTCP). Yet most treatment planning today is not based upon optimization of TCPs and NTCPs, but rather upon meeting physical dose and volume constraints defined by the planner. It has been suggested that treatment planning evaluation and optimization would be more effective if they were biologically and not dose/volume based, and this is the claim debated in this month’s Point/Counterpoint. After a brief overview of biologically and DVH based treatment planning by the Moderator Colin Orton, Joseph Deasy (for biological planning) and Charles Mayo (against biological planning) will begin the debate. Some of the arguments in support of biological planning include: this will result in more effective dose distributions for many patients DVH-based measures of plan quality are known to have little predictive value there is little evidence that either D95 or D98 of the PTV is a good predictor of tumor control sufficient validated outcome prediction models are now becoming available and should be used to drive planning and optimization Some of the arguments against biological planning include: several decades of experience with DVH-based planning should not be discarded we do not know enough about the reliability and errors associated with biological models the radiotherapy community in general has little direct experience with side by side comparisons of DVH vs biological metrics and outcomes it is unlikely that a clinician would accept extremely cold regions in a CTV or hot regions in a PTV, despite having acceptable TCP values Learning Objectives: To understand dose/volume based treatment planning and its potential limitations To understand biological metrics such as EUD, TCP, and NTCP To understand biologically based treatment planning and its potential limitations

Public acceptance of nuclear energy in Mexico

International Nuclear Information System (INIS)

Alonso, Gustavo; Ramirez, Ramon; Palacios, Javier; Gomez, Armando

2008-01-01

One of the main constraints to adopt a nuclear program is the public acceptance. In Mexico, at least, it lacks of an adequate promotion of its benefits and challenges. A big stigma for nuclear electricity production is the association with nuclear weapons, along with myths and misconceptions and bad information about nuclear energy. Mexico has adopted an energy policy to diversify the electricity sources and nuclear energy is among the alternatives to achieve this goal because current studies show that is a safe and a competitive option from an economical point of view. Public opinion plays a very important role in the policy decision making to adopt the deployment of new reactor units; therefore it is necessary to define communication strategies to promote nuclear energy. The current study is an investigation to learn what is the perception and positioning about nuclear energy as a starting point to define the way to improve public acceptance. The national assessment carry on here is divided in two parts, the first one is a qualitative study to know knowledge level, associations and nuclear perception, identifying controversy items and expectations about advantages and disadvantages to define the adequate question to be used in the second part, which is a quantitative study that shows the acceptance of nuclear energy at national level and in particular in two sites that are suitable to deploy new nuclear reactors. From the results of this study some communication and persuasion strategies to improve public perception are defined and they could be used as part of a nuclear program. (author)

Sensory Acceptability of Squash (Cucurbita Maximain Making Ice Cream

Directory of Open Access Journals (Sweden)

Raymund B. Moreno

2015-02-01

Full Text Available - This experimental research was conducted to determine the sensory acceptability of mashed squash (Cucurbita Maxima of different proportions in making ice cream in terms of appearance, aroma, texture, taste and general acceptability. Five treatments were formulated in the study—four of which utilized mashed squash at various proportions and one treatment was used as the control variable which contains no mashed squash at all. The respondents of the study were the 20 Food Technology students and 10 faculty members of West Visayas State University Calinog Campus who were selected through random sampling. The respondents evaluated the finished products using a modified sensory evaluation score sheet based on Six Point Hedonic Scale. The statistical tools used were the means, standard deviation, Wilcoxon Signed Rank Test. The 0.01 alpha level was used as the criterion for acceptance or rejection of the null hypothesis. The result of the study led to the conclusion that there is a significant difference that existed in the level of acceptability of mashed squash in making ice cream in terms of appearance, aroma, and general acceptability, therefore the null hypothesis is rejected. However, no significant difference in the level of acceptability of using mashed squash in making ice cream in terms of taste and texture.

[Analysis and research on cleaning points of HVAC systems in public places].

Science.gov (United States)

Yang, Jiaolan; Han, Xu; Chen, Dongqing; Jin, Xin; Dai, Zizhu

2010-03-01

To analyze cleaning points of HVAC systems, and to provides scientific base for regulating the cleaning of HVAC systems. Based on the survey results on the cleaning situation of HVAC systems around China for the past three years, we analyzes the cleaning points of HVAC systems from various aspects, such as the major health risk factors of HVAC systems, the formulation strategy of the cleaning of HVAC systems, cleaning methods and acceptance points of the air ducts and the parts of HVAC systems, the onsite protection and individual protection, the waste treatment and the cleaning of the removed equipment, inspection of the cleaning results, video record, and the final acceptance of the cleaning. The analysis of the major health risk factors of HVAC systems and the formulation strategy of the cleaning of HVAC systems is given. The specific methods for cleaning the air ducts, machine units, air ports, coil pipes and the water cooling towers of HVAC systems, the acceptance points of HVAC systems and the requirements of the report on the final acceptance of the cleaning of HVAC systems are proposed. By the analysis of the points of the cleaning of HVAC systems and proposal of corresponding measures, this study provides the base for the scientific and regular launch of the cleaning of HVAC systems, a novel technology service, and lays a foundation for the revision of the existing cleaning regulations, which may generate technical and social benefits to some extent.

Acceptance of nuclear power: The Fukushima effect

International Nuclear Information System (INIS)

Siegrist, Michael; Visschers, Vivianne H.M.

2013-01-01

Utilizing a longitudinal study design, the impact of the 2011 accident in Fukushima on acceptance of nuclear power and the evaluation of several scenarios with different percentages of nuclear power were examined. Mail surveys were conducted in the German-speaking part of Switzerland. The first survey took place before the accident in Fukushima (Autumn 2010), the second survey immediately after the accident (March 2011), and the third survey half a year after the accident (October 2011). A sample of 463 persons participated in all three surveys. The accident had a negative impact on the acceptance of nuclear power. The mean change was moderate, and high correlations between the measurement points were observed. Overall, participants thus showed rather stable attitudes towards nuclear power across the three measurement waves. Results of the present study demonstrate the importance of prior beliefs and attitudes for the interpretation of an accident. The evaluation of the various scenarios was strongly influenced by participants’ pre-Fukushima attitudes towards nuclear power. - Highlights: ► Longitudinal studies are important for risk perception research. ► The accident in Fukushima had only a moderate impact on acceptance. ► Acceptance of nuclear power before and after Fukushima was highly correlated. ► People have stable attitudes towards nuclear power

The process of accepting breast cancer among Chinese women: A grounded theory study.

Science.gov (United States)

Chen, Shuang-Qin; Liu, Jun-E; Li, Zhi; Su, Ya-Li

2017-06-01

To describe the process by which Chinese women accept living with breast cancer. Individual interviews were conducted with 18 Chinese women who completed breast cancer treatment. Data were collected from September 2014 to January 2015 at a large tertiary teaching hospital in Beijing, China. In this grounded theory study, data were analyzed using constant comparative and coding analysis methods. In order to explain the process of accepting having breast cancer among women in China through the grounded theory study, a model that includes 5 axial categories was developed. Cognitive reconstruction emerged as the core category. The extent to which the women with breast cancer accepted having the disease was found to increase with the treatment stage and as their treatment stage progressed with time. The accepting process included five stages: non-acceptance, passive acceptance, willingness to accept, behavioral acceptance, and transcendence of acceptance. Our study using grounded theory study develops a model describing the process by which women accept having breast cancer. The model provides some intervention opportunities at every point of the process. Copyright © 2017. Published by Elsevier Ltd.

Collation of Scientific Evidence on Consumer Acceptance of New Food Technologies

DEFF Research Database (Denmark)

Fischer, A. R. H; van Trijp, H. C. M.; Hofenk,, D.

The current report investigates consumer acceptance of new food technologies by reviewing the scientific literature. The review is organised along three routes to consumer acceptance of new technologies: The consumer benefit road: the central road of technology features influencing experienced...... be made how the different roads contribute to consumer acceptance or rejection of a novel food technology dependent on technology characteristics. A checklist for the introduction of novel food technologies taking account of all the roads and the technology is presented at the end of this report.......; and Novel packaging and storage technologies is reviewed along these roads. The results show that research remains fragmented in approach and usually adopts the point of view of a single road to consumer acceptance of a novel technology. Nevertheless by combining the available evidence recommendation can...

A New Blind Pointing Model Improves Large Reflector Antennas Precision Pointing at Ka-Band (32 GHz)

Science.gov (United States)

Rochblatt, David J.

2009-01-01

The National Aeronautics and Space Administration (NASA), Jet Propulsion Laboratory (JPL)-Deep Space Network (DSN) subnet of 34-m Beam Waveguide (BWG) Antennas was recently upgraded with Ka-Band (32-GHz) frequency feeds for space research and communication. For normal telemetry tracking a Ka-Band monopulse system is used, which typically yields 1.6-mdeg mean radial error (MRE) pointing accuracy on the 34-m diameter antennas. However, for the monopulse to be able to acquire and lock, for special radio science applications where monopulse cannot be used, or as a back-up for the monopulse, high-precision open-loop blind pointing is required. This paper describes a new 4th order pointing model and calibration technique, which was developed and applied to the DSN 34-m BWG antennas yielding 1.8 to 3.0-mdeg MRE pointing accuracy and amplitude stability of 0.2 dB, at Ka-Band, and successfully used for the CASSINI spacecraft occultation experiment at Saturn and Titan. In addition, the new 4th order pointing model was used during a telemetry experiment at Ka-Band (32 GHz) utilizing the Mars Reconnaissance Orbiter (MRO) spacecraft while at a distance of 0.225 astronomical units (AU) from Earth and communicating with a DSN 34-m BWG antenna at a record high rate of 6-megabits per second (Mb/s).

Bridging the Gap between Social Acceptance and Ethical Acceptability.

Science.gov (United States)

Taebi, Behnam

2017-10-01

New technology brings great benefits, but it can also create new and significant risks. When evaluating those risks in policymaking, there is a tendency to focus on social acceptance. By solely focusing on social acceptance, we could, however, overlook important ethical aspects of technological risk, particularly when we evaluate technologies with transnational and intergenerational risks. I argue that good governance of risky technology requires analyzing both social acceptance and ethical acceptability. Conceptually, these two notions are mostly complementary. Social acceptance studies are not capable of sufficiently capturing all the morally relevant features of risky technologies; ethical analyses do not typically include stakeholders' opinions, and they therefore lack the relevant empirical input for a thorough ethical evaluation. Only when carried out in conjunction are these two types of analysis relevant to national and international governance of risky technology. I discuss the Rawlsian wide reflective equilibrium as a method for marrying social acceptance and ethical acceptability. Although the rationale of my argument is broadly applicable, I will examine the case of multinational nuclear waste repositories in particular. This example will show how ethical issues may be overlooked if we focus only on social acceptance, and will provide a test case for demonstrating how the wide reflective equilibrium can help to bridge the proverbial acceptance-acceptability gap. © 2016 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

A numerical integration-based yield estimation method for integrated circuits

International Nuclear Information System (INIS)

Liang Tao; Jia Xinzhang

2011-01-01

A novel integration-based yield estimation method is developed for yield optimization of integrated circuits. This method tries to integrate the joint probability density function on the acceptability region directly. To achieve this goal, the simulated performance data of unknown distribution should be converted to follow a multivariate normal distribution by using Box-Cox transformation (BCT). In order to reduce the estimation variances of the model parameters of the density function, orthogonal array-based modified Latin hypercube sampling (OA-MLHS) is presented to generate samples in the disturbance space during simulations. The principle of variance reduction of model parameters estimation through OA-MLHS together with BCT is also discussed. Two yield estimation examples, a fourth-order OTA-C filter and a three-dimensional (3D) quadratic function are used for comparison of our method with Monte Carlo based methods including Latin hypercube sampling and importance sampling under several combinations of sample sizes and yield values. Extensive simulations show that our method is superior to other methods with respect to accuracy and efficiency under all of the given cases. Therefore, our method is more suitable for parametric yield optimization. (semiconductor integrated circuits)

A numerical integration-based yield estimation method for integrated circuits

Energy Technology Data Exchange (ETDEWEB)

Liang Tao; Jia Xinzhang, E-mail: tliang@yahoo.cn [Key Laboratory of Ministry of Education for Wide Bandgap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi' an 710071 (China)

2011-04-15

A novel integration-based yield estimation method is developed for yield optimization of integrated circuits. This method tries to integrate the joint probability density function on the acceptability region directly. To achieve this goal, the simulated performance data of unknown distribution should be converted to follow a multivariate normal distribution by using Box-Cox transformation (BCT). In order to reduce the estimation variances of the model parameters of the density function, orthogonal array-based modified Latin hypercube sampling (OA-MLHS) is presented to generate samples in the disturbance space during simulations. The principle of variance reduction of model parameters estimation through OA-MLHS together with BCT is also discussed. Two yield estimation examples, a fourth-order OTA-C filter and a three-dimensional (3D) quadratic function are used for comparison of our method with Monte Carlo based methods including Latin hypercube sampling and importance sampling under several combinations of sample sizes and yield values. Extensive simulations show that our method is superior to other methods with respect to accuracy and efficiency under all of the given cases. Therefore, our method is more suitable for parametric yield optimization. (semiconductor integrated circuits)

Acceptability, acceptance and decision making

International Nuclear Information System (INIS)

Ackerschott, H.

2002-01-01

There is a fundamental difference between the acceptability of a civilizatory or societal risk and the acceptability of the decision-making process that leads to a civilizatory or societal risk. The analysis of individual risk decisions - regarding who, executes when which indisputably hazardous, unhealthy or dangerous behaviour under which circumstances - is not helpful in finding solutions for the political decisions at hand in Germany concerning nuclear energy in particular or energy in general. The debt for implementation of any technology, in the sense of making the technology a success in terms of broad acceptance and general utilisation, lies with the particular industry involved. Regardless of the technology, innovation research identifies the implementation phase as most critical to the success of any innovation. In this sense, nuclear technology is at best still an innovation, because the implementation has not yet been completed. Fear and opposition to innovation are ubiquitous. Even the economy - which is often described as 'rational' - is full of this resistance. Innovation has an impact on the pivotal point between stability, the presupposition for the successful execution of decisions already taken and instability, which includes insecurity, but is also necessary for the success of further development. By definition, innovations are beyond our sphere of experience; not at the level of reliability and trust yet to come. Yet they are evaluated via the simplifying heuristics for making decisions proven not only to be necessary and useful, but also accurate in the familiar. The 'settlement of the debt of implementation', the accompanying communication, the decision-making procedures concerning the regulation of averse effects of the technology, but also the tailoring of the new technology or service itself must be directed to appropriate target groups. But the group often aimed at in the nuclear debate, the group, which largely determines political

The use of near-infrared scanning for the prediction of pulp yield and ...

African Journals Online (AJOL)

Calibration models to predict pulp yield, cellulose and lignin content were developed by applying chemometrics and partial least squares regression. Validation and determination of prediction accuracy of the models were performed using independent data. The prediction of cellulose and lignin were acceptable with ...

Consumer Acceptance of a Polyphenolic Coffee Beverage.

Science.gov (United States)

Nguyen, Thuy; Kuchera, Meredith; Smoot, Katie; Diako, Charles; Vixie, Beata; Ross, Carolyn F

2016-10-05

The objective of this study was to determine if Chardonnay grape seed pomace (GSP), a waste stream of wine production, could be used as a functional ingredient in brewed coffee. Two consumer panels were conducted to assess the acceptance of coffee at coffee replacement (w/w) values of 0% (control), 6.25%, 12.50%, 18.75%, or 25% GSP. The 1st consumer panel (n = 80) assessed the coffee samples served "black." The 2nd panel (n = 67) assessed the coffee samples with adjustment (that is, sweeteners, milk, and cream) options available. Consumer sensory evaluation involved evaluating the 5 treatments individually for acceptance of appearance, aroma, taste/flavor, and overall acceptance using a 9-point hedonic scale. A check-all-that-apply questionnaire surveyed the sensory attributes describing aroma, appearance, and taste/flavor of the samples. Oxygen radical absorbance capacity was used to measure the effects of antioxidant levels in GSP coffee samples. Results showed that GSP could be added at 6.25% replacement without significantly affecting the overall consumer acceptance of coffee compared to the control (0% GSP). Above 6.25% GSP supplementation, the coffee beverage was described as more tan, milky, watery/dilute, and mild, and was generally less accepted by the consumers. GSP also increased the antioxidant capacity of the coffee compared to the control (0% GSP), with no significant differences among replacement values. Therefore, 6.25% GSP replacement is recommended for creating coffee beverages acceptable to consumers. Further in vivo investigation may substantiate the free-radical scavenging capacity of GSP coffee and its potential health benefits. © 2016 Institute of Food Technologists®.

Point prevalence of bovine fascioliasis and the influence of chemotherapy on the milk yield in a lactating bovine population from the district of Toba Tek Singh, Pakistan.

Science.gov (United States)

Khan, M K; Sajid, M S; Khan, M N; Iqbal, Z; Arshad, M; Hussain, A

2011-09-01

This paper provides an estimation of the point prevalence of fascioliasis and its economic impact in terms of increased milk yield after chemotherapy of a bovine population from the district of Toba Tek Singh, Punjab, Pakistan. A total of 2400 cattle and buffaloes were examined quantitatively using the McMaster egg-counting technique. Infected cattle and buffaloes (50 of each) were randomly selected and each divided into two groups of 25 animals. Groups A (buffaloes) and C (cattle) were treated with oxyclozanide (orally, 16.6 mg kg- 1 body weight). Groups B and D served as negative controls for buffaloes and cattle, respectively. Pre- and post-treatment milk yield was recorded to determine if there were any changes in milk yield after treatment. Of 2400 faecal samples analysed, 654 (27.25%) were positive for Fasciola spp. with a mean number of eggs per gram (EPG) of 503.2. The point prevalence and worm burden of fascioliasis was significantly higher (OR = 2.13; P < 0.05) in buffaloes (34.58%; 415/1200; mean EPG maximum likelihood = 521.4) as compared to that of cattle (19.92%; 239/1200; mean EPG maximum likelihood = 415.8). Among the parasite species, F. gigantica (19.88%; 477/2400) was predominant (OR = 3.12; P < 0.05) as compared to F. hepatica (7.38%; 177/2400). An average daily increase of 0.67 and 0.87 litres of milk, with 0.41% and 0.37% more fat per animal, was observed in oxyclozanide-treated buffaloes and cattle, respectively. The economic value of reduced production of infected animals was estimated as US$0.33 and 0.32 per animal per day for cattle and buffaloes, respectively.

Public Acceptance of Nuclear Energy in Mexico

International Nuclear Information System (INIS)

Ramirez-Sanchez, Jose R.; Alonso, Gustavo; Palacios, H. Javier

2006-01-01

The nuclear energy is attracting renewed interest of public and policy makers due to his potential role in long term strategies aiming to reduce the risk of global warming and in a more general, to carry out sustainable policies, however, any project of nuclear nature arise concerns about the risks associated with the release of radioactivity during accident conditions, radioactive waste disposal and nuclear weapons proliferation. Then in light of the likeliness for a new nuclear project in Mexico, is necessary to design a strategy to improve the social acceptance of nuclear power. This concern is been boarding since the environmental and economic point of view. The information that can change the perception of nuclear energy towards increase public acceptance, should be an honest debate about the benefits of nuclear energy, of course there are questions and they have to be answered, but in a realistic and scientific way: So thinking in Mexico as a first step it is important to communicate to the government entities and political parties that nuclear energy is a proven asset that it is emission free and safe. Of course besides the guarantee of a proven technology, clean and safe relies the economic fact, and in Mexico this could be the most important aspect to communicate to key people in government. Based in the Laguna Verde survey it is clear that we have to find the adequate means to distribute the real information concerning nuclear technology to the public, because the results shows that Mexican people does not have complete information about nuclear energy, but public can support it when they have enough information. From the IAEA study we can say that in Mexico public acceptance of nuclear energy it s not so bad, is the highest percentage of acceptance of nuclear technology for health, considering benefits to the environment Mexican opposition to build new plants is the second less percentage, and generally speaking 60% of the people accept somehow nuclear

Yield fracture mechanics. Report colloquium of the DFG

International Nuclear Information System (INIS)

1992-01-01

This volume contains 17 lectures, which were given at the Report Colloquium of the DFG at Bonn on November 5th 1992. The main points of yield fracture mechanics were: Theory, experiment technique, transferability, material and structure. (MM) [de

Waste acceptance criteria study: Volume 2, Appendixes: Final report

International Nuclear Information System (INIS)

Johnson, E.R.; McLeod, N.B.; McBride, J.A.

1988-09-01

These appendices to the report on Waste Acceptance Criteria have been published as a separate volume for the convenience of the reader. They consist of the text of the 10CFR961 Contract for disposal of spent fuel, estimates of the cost (savings) to the DOE system of accepting different forms of spent fuel, estimates of costs of acceptance testing/inspection of spent fuel, illustrative specifications and procedures, and the resolution of comments received on a preliminary draft of the report. These estimates of costs contained herein preliminary and are intended only to demonstrate the trends in costs, the order of magnitude involved, and the methodology used to develop the costs. The illustrative specifications and procedures included herein have been developed for the purpose of providing a starting point for the development of a consensus on such matters between utilities and DOE

Understanding the acceptability of a computer decision support system in pediatric primary care.

Science.gov (United States)

Bauer, Nerissa S; Carroll, Aaron E; Downs, Stephen M

2014-01-01

Individual users' attitudes and opinions help predict successful adoption of health information technology (HIT) into practice; however, little is known about pediatric users' acceptance of HIT for medical decision-making at the point of care. We wished to examine the attitudes and opinions of pediatric users' toward the Child Health Improvement through Computer Automation (CHICA) system, a computer decision support system linked to an electronic health record in four community pediatric clinics. Surveys were administered in 2011 and 2012 to all users to measure CHICA's acceptability and users' satisfaction with it. Free text comments were analyzed for themes to understand areas of potential technical refinement. 70 participants completed the survey in 2011 (100% response rate) and 64 of 66 (97% response rate) in 2012. Initially, satisfaction with CHICA was mixed. In general, users felt the system held promise; however various critiques reflected difficulties understanding integrated technical aspects of how CHICA worked, as well as concern with the format and wording on generated forms for families and users. In the subsequent year, users' ratings reflected improved satisfaction and acceptance. Comments also reflected a deeper understanding of the system's logic, often accompanied by suggestions on potential refinements to make CHICA more useful at the point of care. Pediatric users appreciate the system's automation and enhancements that allow relevant and meaningful clinical data to be accessible at point of care. Understanding users' acceptability and satisfaction is critical for ongoing refinement of HIT to ensure successful adoption into practice.

Colonoscopy: Evaluating indications and diagnostic yield

International Nuclear Information System (INIS)

Al-Shamali, Mohammed A.; Hasan, F.; Siddiqe, I.; Al-Nakeeb, B.; Kalaoui, M.; Khajah, A.

2001-01-01

Colonoscopic procedure is an accepted modality for the evaluation ofcolonic disease. Open-access versus restricted-access colonoscopy has beenargued over in the recent literature. The aim of this retrospective analysisis to identify the yield of the major indications for the procedure, and thepattern of colon pathology in our community. We retrospectively analyzed ourexperience in 3000 colonoscopies over a five-year period. The patientscomprised 1145 females (38%) and 1855 males (62%) and their ages ranged from9 months to 95 years (mean 39.2). There were 2283 patients (76%) who wereaged less than 55 years. Complete examination to the cecum was possible in2850 cases (95%). Pathological findings were identified in 640 patients(21%). The diagnostic yield of patients referred for lower abdominal pain andsurveillance was low, at 7% and 17%, respectively. The yield was high forthose with lower gastrointestinal bleeding (47%), non-bloody diarrhea (35%),iron deficiency anemia (30%), mass lesions identified by radiology (53%) andpolyps identified by radiology (70%). Inflammatory bowel disease wasdiagnosed in 220 patients, carcinoma in 64 patients and colonic polyps in 139patients. Colonic diseases are not uncommon in our part of the world.Colonoscopy is a rewarding procedure in those patients referred with lowergastrointestinal bleeding, mass lesions, polyps and diarrhea. The procedureis less rewarding in patients with lower abdominal pain and in thoseundergoing surveillance colonoscopy. Patient selection on the basis of thepresenting complaint may help to utilize the limited resource available togastroenterologists. About 63% of the procedures were done for indicationsfound to have a low yield. Inflammatory bowel disease is seen with increasingfrequency in our population. (author)

Does green consumerism increase the acceptance of wind power?

International Nuclear Information System (INIS)

Thøgersen, John; Noblet, Caroline

2012-01-01

In this paper, we discuss what might be termed an action-based learning approach to promoting important pro-environmental actions, such as support for or acceptance of environmental policy. Such an approach involves promoting simple and easy behaviours as entry points for more radical steps towards sustainability, referred to as “catalytic” or “wedge” behaviours. Despite the obvious need for innovative approaches to promote important pro-environmental behaviour, and sound theoretical backing for such concepts, there is a lack of research testing the key propositions of this approach. In a survey study based on a random sample of residents of the state of Maine, USA, we find that both everyday “green” behaviour and the acceptance of an expansion of wind power are rooted in environmental concern and that everyday “green” behaviour gives a significant contribution to predicting acceptance of wind power when controlling for environmental concern. Hence, the promotion of everyday “green” behaviours may prepare the grounds for increasing acceptance of more far-reaching changes in the population, such as an expansion of wind power. - Highlights: ► Acceptance of wind power increases with environmental concern. ► So does everyday “green” consumerism. ► Green consumerism further increases acceptance of wind power. ► The effect of environmental concern on acceptance is partly mediated through green consumerism. ► Participants in the study are a random sample of residents of Maine, USA.

The Acceptance Strategy for Nuclear Power Plant In Indonesia

International Nuclear Information System (INIS)

Suhaemi, Tjipta; Syaukat, Achmad

2010-01-01

Indonesia has planned to build nuclear power plants. Some feasibility studies have been conducted intensively. However, the processes of NPP introduction are still uncertain. National Energy Plan in Indonesia, which has been made by some governmental agencies, does not yet give positive impact to the government decision to construct the nuclear power plant (NPP). This paper discusses the process of NPP introduction in Indonesia, which has been colored with debate of stakeholder and has delayed decision for go-nuclear. The technology paradigm is used to promote NPP as an alternative of reliable energy resources. This paradigm should be complemented with international politic-economic point of view. The international politic-economic point of view shows that structural powers, consisting of security, production, finance, and knowledge structures, within which the NPP is introduced, have dynamic characteristics. The process of NPP introduction in Indonesia contains some infrastructure development (R and D, legislation, regulation, energy planning, site study, public acceptance efforts, etc), but they need a better coherent NPP implementation program and NPP Acceptance Program. Strategic patterns for NPP acceptance described in this paper are made by considering nuclear regulation development and the interest of basic domestic participation. The first NPP program in Indonesia having proven technology and basic domestic participation is and important milestone toward and optimal national energy-mix.

Acceptance of Prostitution and Its Social Determinants in Canada.

Science.gov (United States)

Cao, Liqun; Lu, Ruibin; Mei, Xiaohan

2017-08-01

The nature of collective perception of prostitution is understudied in Canada. Except some rudimentary reports on the percentages of the key legal options, multivariate analysis has never been used to analyze the details of public opinion on prostitution. The current study explores the trend of public attitude toward prostitution acceptability in Canada over a 25-year span and examines the social determinants of the acceptability of prostitution, using structural equation modeling (SEM), which allows researchers to elaborate both direct and indirect effects (through mediating variables) on the outcome variable. Results show that the public has become more acceptant of prostitution over time. In addition, the less religious, less authoritarian, and more educated are more acceptant of prostitution than the more religious, more authoritarian, and less well educated. The effects of religiosity and authoritarianism mediate out the direct effects of age, gender, gender equality, marriage, marriage as an outdated institution, Quebec, race, and tolerance. The findings may serve as a reference point for the law reform regarding the regulation of prostitution in Canada.

Reducing calories, fat, saturated fat, and sodium in restaurant menu items: Effects on consumer acceptance.

Science.gov (United States)

Patel, Anjali A; Lopez, Nanette V; Lawless, Harry T; Njike, Valentine; Beleche, Mariana; Katz, David L

2016-12-01

To assess consumer acceptance of reductions of calories, fat, saturated fat, and sodium to current restaurant recipes. Twenty-four menu items, from six restaurant chains, were slightly modified and moderately modified by reducing targeted ingredients. Restaurant customers (n = 1,838) were recruited for a taste test and were blinded to the recipe version as well as the purpose of the study. Overall consumer acceptance was measured using a 9-point hedonic (like/dislike) scale, likelihood to purchase scale, Just-About-Right (JAR) 5-point scale, penalty analysis, and alienation analysis. Overall, modified recipes of 19 menu items were scored similar to (or better than) their respective current versions. Eleven menu items were found to be acceptable in the slightly modified recipe version, and eight menu items were found to be acceptable in the moderately modified recipe version. Acceptable ingredient modifications resulted in a reduction of up to 26% in calories and a reduction of up to 31% in sodium per serving. The majority of restaurant menu items with small reductions of calories, fat, saturated fat, and sodium were acceptable. Given the frequency of eating foods away from home, these reductions could be effective in creating dietary improvements for restaurant diners. © 2016 The Obesity Society.

'Saddle-point' ionization

International Nuclear Information System (INIS)

Gay, T.J.; Hale, E.B.; Irby, V.D.; Olson, R.E.; Missouri Univ., Rolla; Berry, H.G.

1988-01-01

We have studied the ionization of rare gases by protons at intermediate energies, i.e., energies at which the velocities of the proton and the target-gas valence electrons are comparable. A significant channel for electron production in the forward direction is shown to be 'saddle-point' ionization, in which electrons are stranded on or near the saddle-point of electric potential between the receding projectile and the ionized target. Such electrons yield characteristic energy spectra, and contribute significantly to forward-electron-production cross sections. Classical trajectory Monte Carlo calculations are found to provide qualitative agreement with our measurements and the earlier measurements of Rudd and coworkers, and reproduce, in detail, the features of the general ionization spectra. (orig.)

User Acceptability of Design Concepts for a Life Sign Detection System

National Research Council Canada - National Science Library

Beidleman, Beth

2003-01-01

.... Over the next four days of testing (Days 2-5), each soldier wore each of the four design concepts for 24 h and completed a user acceptability survey containing yes/no and 9-point hedonic scale questions...

Understanding consumers’ acceptance of mobile payments : a theoretical model and empirical validation

OpenAIRE

Chen, Jiajun

2007-01-01

This research investigates consumer acceptance of mobile payments. Mobile payments offer an alternative payment method for consumers, and allow consumers to make point-of-sales payments through mobile devices, such as mobile phones and Personal Digital Assistants (PDAs). It aims to present a better understanding of mobile payments, developing a consumer acceptance model for mobile payments. Moreover, it offers a reference and a source of literature for the industry and academic researchers in...

Grain yield increase in cereal variety mixtures: A meta-analysis of field trials

DEFF Research Database (Denmark)

Kiær, Lars Pødenphant; Skovgaard, Ib; Østergård, Hanne

2009-01-01

on grain yield. To investigate the prevalence and preconditions for positive mixing effects, reported grain yields of variety mixtures and pure variety stands were obtained from previously published variety trials, converted into relative mixing effects and combined using meta-analysis. Furthermore...... as meeting the criteria for inclusion in the meta-analysis; on the other hand, nearly 200 studies were discarded. The accepted studies reported results on both winter and spring types of each crop species. Relative mixing effects ranged from 30% to 100% with an overall meta-estimate of at least 2.7% (p

Acceptance and implementation of a system of planning computerized based on Monte Carlo

International Nuclear Information System (INIS)

Lopez-Tarjuelo, J.; Garcia-Molla, R.; Suan-Senabre, X. J.; Quiros-Higueras, J. Q.; Santos-Serra, A.; Marco-Blancas, N.; Calzada-Feliu, S.

2013-01-01

It has been done the acceptance for use clinical Monaco computerized planning system, based on an on a virtual model of the energy yield of the head of the linear electron Accelerator and that performs the calculation of the dose with an algorithm of x-rays (XVMC) based on Monte Carlo algorithm. (Author)

Discriminant Analysis of Essay, Mathematics/Science Type of Essay, College Scholastic Ability Test, and Grade Point Average as Predictors of Acceptance to a Pre-med Course at a Korean Medical School

OpenAIRE

Geum-Hee Jeong

2008-01-01

A discriminant analysis was conducted to investigate how an essay, a mathematics/science type of essay, a college scholastic ability test, and grade point average affect acceptance to a pre-med course at a Korean medical school. Subjects included 122 and 385 applicants for, respectively, early and regular admission to a medical school in Korea. The early admission examination was conducted in October 2007, and the regular admission examination was conducted in January 2008. The analysis of ea...

Nuclear acceptance and the regulatory environment: hard lessons from American experience

International Nuclear Information System (INIS)

Rowden, M.A.

1982-01-01

This paper discusses the efforts of those involved in the American nuclear power programme to earn public acceptance from the outset. It points out that the excessively stringent protection measures and the preoccupation with a catastrophic accident have probably contributed to making the public wary of nuclear power. In the light of experience following the Three Mile Island accident there will probably be a more realistic approach in future and acceptable and comparative risks, coupled with cost benefit will be considered, rather than unattainable goals. (U.K.)

Low acceptance of HSV-2 testing among high-risk women.

Science.gov (United States)

Roth, A M; Dodge, B M; Van Der Pol, B; Reece, M; Zimet, G D

2011-06-01

We evaluated the acceptability of a community-based herpes simplex virus type 2 (HSV-2) screening programme for at-risk women and assessed factors related to uptake of point of care HSV-2 testing. One hundred recently arrested women (median age 34 years) were recruited from a community court handling lower-level misdemeanour cases in Indianapolis, Indiana. Individuals completed a survey assessing factors related to HSV-2 screening intentions and were offered point of care HSV-2 testing. Rates of HSV-2 infection in this population are high; 61.1% of women tested were positive. The majority (81%) accepted a prescription for suppressive therapy. Women in this sample indicated that HSV-2 screening is an important component of health care but were unwilling to pay the US$10 it cost to be tested. To encourage this and other high-risk populations to be screened for HSV-2, public health resources will be needed to help individuals overcome cost-related barriers to care.

Regional food dishes in the Brazilian National School Food Program: Acceptability and nutritional composition

Directory of Open Access Journals (Sweden)

Diogo thimoteo da Cunha

2014-08-01

Full Text Available Objective: the objective of this study was to evaluate the nutritional composition and describe the acceptability of regional culinary dishes served to students from public schools of rural and urban areas. Methods: Ten Brazilian regional dishes were evaluated for acceptability and nutritional composition. the survey was conducted in schools located in rural and urban areas of two cities in the state of São Paulo. Dish acceptability was evaluated using leftover analysis and a 5-point facial hedonic scale. the adherence index was calculated and used as an indirect measure of acceptance, and the nutritional composition was calculated based on the technical files of each dish. Results: A total of 2,384 students from 20 schools participated in the study and 1,174 tasted and evaluated the dishes. the test using the 5-point facial hedonic scale demonstrated that five dishes (Caldo verde soup, persimmon jelly, chicken with okra, puréed cornmeal with spinach, and arugula pizza had an acceptability rate above 85.0%. the mean adherence indices were 57.3% and 55.6% in urban and rural environments, respectively. Analysis of the nutritional composition of regional dishes indicates that these dishes can partially meet macronutrient recommendations. Conclusion: the tested dishes can become part of school menus as they were accepted or partly accepted by the students regardless of school location, whether rural or urban. the cultural heritage is an important resource for the food sovereignty of a country and should be constantly encouraged.

The formulations and acceptance of herbal lip balm

International Nuclear Information System (INIS)

Seri Chempaka Mohd Yusof; Fazliana Mohd Saaya; Zainah Adam

2006-01-01

With increasing public concern on the presence of hazardous synthetic and chemical ingredients in cosmetic products, new efforts is gained to produce products using herbs as natural sources. Formulations of herbal lip balm was constructed with ingredients in specific percentages i.e. extracts of herbs, essential oils, honey and olive oil. The aim of this study is to obtain suitable formulations and combinations of essential oils and herbal extracts in herbal lip balm and to observe the influence of the ingredients to the acceptance of herbal lip balm. Acceptability of the formulations was determined through sensory evaluation using 30 members (female) of untrained panelists comprising staff of MINT for two weeks application. A 7 points hedonic rating scale was used. The attributes evaluated are aroma, colour, texture, taste, smoothness, spreading ability and overall acceptance. Natural pigment from Hibiscus sabdariffa L. was used as colorant that responsible for the red colour. Increased redness colour in lip balm scored higher value for the overall acceptability of the lip balm. The lip balm had the ability to moisten the lips and also reduced the mouth odour due to the presence of the essential oils and honey that had antibacterial and antioxidant properties. (Author)

Response Surface Method and Linear Programming in the development of mixed nectar of acceptability high and minimum cost

Directory of Open Access Journals (Sweden)

Enrique López Calderón

2012-06-01

Full Text Available The aim of this study was to develop a high acceptability mixed nectar and low cost. To obtain the nectar mixed considered different amounts of passion fruit, sweet pepino, sucrose, and completing 100% with water, following a two-stage design: screening (using a design of type 2 3 + 4 center points and optimization (using a design of type 2 2 + 2*2 + 4 center points; stages that allow explore a high acceptability formulation. Then we used the technique of Linear Programming to minimize the cost of high acceptability nectar. Result of this process was obtained a mixed nectar optimal acceptability (score of 7, when the formulation is between 9 and 14% of passion fruit, 4 and 5% of sucrose, 73.5% of sweet pepino juice and filling with water to the 100%. Linear Programming possible reduced the cost of nectar mixed with optimal acceptability at S/.174 for a production of 1000 L/day.

Rhodamine 800 as reference substance for fluorescence quantum yield measurements in deep red emission range

Energy Technology Data Exchange (ETDEWEB)

Alessi, A., E-mail: andrea.alessi@eni.com [Centro Ricerche per le Energie non Convenzionali, Istituto eni Donegani, e.n.i. S.p.A., Via G. Fauser 4, 28100 Novara (Italy); Salvalaggio, M. [Centro Ricerche per le Energie non Convenzionali, Istituto eni Donegani, e.n.i. S.p.A., Via G. Fauser 4, 28100 Novara (Italy); Ruzzon, G. [HORIBA Jobin Yvon Srl, Via Cesare Pavese 35/AB, 20090 Opera Milano (Italy)

2013-02-15

The determination of fluorescence quantum yields ({Phi}{sub f}) of deep red dyes emitting at 635-900 nm is difficult due to lack of suitable standards. In this work, we propose a commercial dye, rhodamine 800 (Rho800), as reference standard which belongs to the family of xanthenes. The quantum yield of rhodamine 800 in absolute ethanol has been studied using a relative method with cresyl violet (CV) and rhodamine 101 (Rho101) as references, and an absolute fluorometric method by integrating sphere measurements. - Highlights: Black-Right-Pointing-Pointer A red emitting dye Rhodamine 800 was electronic spectroscopy characterized. Black-Right-Pointing-Pointer Its fluorescence quantum yield was studied using a relative and an absolute method. Black-Right-Pointing-Pointer The values found are greater than the values currently known in the literature.

Effect of post-partum body condition score on milk yield and ...

African Journals Online (AJOL)

The study determines the effect of dam body condition on milk yield and milk composition of dairy cows. The milk production records of 60 Friesian x Bunaji dairy cows were used for the study. The body condition score (BCS) was recorded on scale 1 to 5 with an increment of 0.25 points. The mean initial milk yield (IMY), ...

The LANL C-NR counting room and fission product yields

Energy Technology Data Exchange (ETDEWEB)

Jackman, Kevin Richard [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)

2015-09-21

This PowerPoint presentation focused on the following areas: LANL C-NR counting room; Fission product yields; Los Alamos Neutron wheel experiments; Recent experiments ad NCERC; and Post-detonation nuclear forensics

A Study on the Acceptance Criteria for DTrip Frequency

International Nuclear Information System (INIS)

Kim, Kil Yoo; Lee, Hyun Woo; Jae, Moo Sung

2011-01-01

Many risk informed regulation and applications (RIR and A) are approved, and more RIR and A will be actively applied in Korea. The acceptance criteria for the RIR and A have been DCDF, and DLERF. However, in the economical point of view, the change of the reactor trip frequency (hereafter, it is called Dtrip) are important element to monitor in the RIR and A. A reactor trip causes a huge economical loss, and causes a bad reputation in the social acceptance which causes eventually a social cost, and could induce a safety problem by giving a severe stress on the operators. Usually, the chief managers of nuclear power plants are reluctant to increase the trip frequency by a RIR and A, even though the RIR and A could bring an economical benefit, and could not threaten the safety. Because, if a reactor trip occurs, it would be reflected in his performance assessment. Therefore, it is necessary to set up an acceptance criteria for Dtrip in the RIR and A without depending on the personal preference of the chief manager. This paper introduces the acceptance criteria for Dtrip in the RIR and A

Measurement of Self-Monitoring Web Technology Acceptance and Use in an e-Health Weight-Loss Trial

OpenAIRE

Ma, Jun; Xiao, Lan; Blonstein, Andrea C.

2013-01-01

Background: Research on technology acceptance and use in e-health weight-loss interventions is limited. Using data from a randomized controlled trial of two e-health interventions, we evaluated the acceptance and use of a self-monitoring Web site for weight loss. Materials and Methods: We examined eight theoretical constructs about technology acceptance using adapted 5-point Likert scales and the association of measured Web site usage and weight loss. Results: All scales had hi...

Consumer attitudes towards beef and acceptability of enhanced beef.

Science.gov (United States)

Robbins, K; Jensen, J; Ryan, K J; Homco-Ryan, C; McKeith, F K; Brewer, M S

2003-10-01

The objective of this study was to evaluate consumer quality characteristics of enhanced steaks and roasts derived from cattle supplemented with vitamin E during finishing, and to assess the attitudes of these consumers towards beef. Twelve steers were fed either a control (E-) diet or a diet supplemented with dl-alpha tocopheryl acetate (E+). Paired strip loins and rounds were either used as controls (C) or were pumped (P) to 110% of raw weight to contain 0.4% sodium chloride and 0.4% sodium tripolyphosphate in the final product. Consumers (n=103) evaluated roasts and steaks for juiciness, tenderness, saltiness, and overall acceptability on a 9-point hedonic scale. Enhanced steaks and roasts were more acceptable than non-enhanced controls; E+ steaks were less acceptable than E- steaks. A beef quality questionnaire revealed that color, price, visible fat and cut were the most important factors underlying beef steak purchase, while tenderness, flavor and juiciness were weighted most heavily with regard to eating satisfaction.

Low dose irradiation influence on yield and quality of fruit juice

International Nuclear Information System (INIS)

Mitchell, G.E.; Isaacs, A.R.; Williams, D.J.; McLauchlan, R.L.; Nottingham, S.M.; Hammerton, K.

1991-01-01

Granny Smith apples, Valencia oranges, and Pearlette grapes grown in Queensland, Australia were irradiated at 0, 75, 300 and 600 Gy. Following irradiation, juice was extracted and analysed for quality and compositional changes. Irradiation treatment significantly (p0.05) decreased yield of apple juice (by 6.3% w/w at 600 Gy) and grape juice (by 4.8% w/w at 600 Gy) but did not significantly (p0.05) affect yield of orange juice (OJ). Acceptability significantly (p0.05) decreased in OJ after 600 Gy treatment. Other changes in quality and composition were minimal. Juice from irradiated apples and oranges stored at 5 degrees C for 8 wk showed similar results

Responsible technology acceptance

DEFF Research Database (Denmark)

Toft, Madeleine Broman; Schuitema, Geertje; Thøgersen, John

2014-01-01

As a response to climate change and the desire to gain independence from imported fossil fuels, there is a pressure to increase the proportion of electricity from renewable sources which is one of the reasons why electricity grids are currently being turned into Smart Grids. In this paper, we focus...... on private consumers’ acceptance of having Smart Grid technology installed in their home. We analyse acceptance in a combined framework of the Technology Acceptance Model and the Norm Activation Model. We propose that individuals are only likely to accept Smart Grid technology if they assess usefulness...... in terms of a positive impact for society and the environment. Therefore, we expect that Smart Grid technology acceptance can be better explained when the well-known technology acceptance parameters included in the Technology Acceptance Model are supplemented by moral norms as suggested by the Norm...

Critical points for finite Fibonacci chains of point delta-interactions and orthogonal polynomials

International Nuclear Information System (INIS)

De Prunele, E

2011-01-01

For a one-dimensional Schroedinger operator with a finite number n of point delta-interactions with a common intensity, the parameters are the intensity, the n - 1 intercenter distances and the mass. Critical points are points in the parameters space of the Hamiltonian where one bound state appears or disappears. The study of critical points for Hamiltonians with point delta-interactions arranged along a Fibonacci chain is shown to be closely related to the study of the so-called Fibonacci operator, a discrete one-dimensional Schroedinger-type operator, which occurs in the context of tight binding Hamiltonians. These critical points are the zeros of orthogonal polynomials previously studied in the context of special diatomic linear chains with elastic nearest-neighbor interaction. Properties of the zeros (location, asymptotic behavior, gaps, ...) are investigated. The perturbation series from the solvable periodic case is determined. The measure which yields orthogonality is investigated numerically from the zeros. It is shown that the transmission coefficient at zero energy can be expressed in terms of the orthogonal polynomials and their associated polynomials. In particular, it is shown that when the number of point delta-interactions is equal to a Fibonacci number minus 1, i.e. when the intervals between point delta-interactions form a palindrome, all the Fibonacci chains at critical points are completely transparent at zero energy. (paper)

Ideal Standards, Acceptance, and Relationship Satisfaction: Latitudes of Differential Effects

Directory of Open Access Journals (Sweden)

Asuman Buyukcan-Tetik

2017-09-01

Full Text Available We examined whether the relations of consistency between ideal standards and perceptions of a current romantic partner with partner acceptance and relationship satisfaction level off, or decelerate, above a threshold. We tested our hypothesis using a 3-year longitudinal data set collected from heterosexual newlywed couples. We used two indicators of consistency: pattern correspondence (within-person correlation between ideal standards and perceived partner ratings and mean-level match (difference between ideal standards score and perceived partner score. Our results revealed that pattern correspondence had no relation with partner acceptance, but a positive linear/exponential association with relationship satisfaction. Mean-level match had a significant positive association with actor’s acceptance and relationship satisfaction up to the point where perceived partner score equaled ideal standards score. Partner effects did not show a consistent pattern. The results suggest that the consistency between ideal standards and perceived partner attributes has a non-linear association with acceptance and relationship satisfaction, although the results were more conclusive for mean-level match.

Measure of the e+e-{yields}bb Cross Section at the LEP Energies; Medida de la seccion eficaz e''+e''-{yields}bb a las Energias de LEP

Energy Technology Data Exchange (ETDEWEB)

Arce Dubois, P.

1992-07-01

In the present work I analyse the data collected during 1990 by the L3 detector, situated in the electron-positron collider LEP. After selecting the events e''+e''-{yields} bb through their semileptonic decays into muons, I calculate the cross section for the process e''+e''- {yields} bb at different energy points around the mass of the vectorial boson Z, and I measure some parameters of the Standard Model, namely, the Br(b{yields}{mu} ),{gamma}{sub z}n-{yields}bb/{gamma}{sub z}n{yields}had and {gamma}{sub z}n{yields}bb{gamma}{sub z}n{yields}e''+e''-. (Author) 26 refs.

"I Do Feel Like a Scientist at Times": A Qualitative Study of the Acceptability of Molecular Point-Of-Care Testing for Chlamydia and Gonorrhoea to Primary Care Professionals in a Remote High STI Burden Setting.

Directory of Open Access Journals (Sweden)

Lisa Natoli

Full Text Available Point-of-care tests for chlamydia (CT and gonorrhoea (NG could increase the uptake and timeliness of testing and treatment, contribute to improved disease control and reduce reproductive morbidity. The GeneXpert (Xpert CT/NG assay, suited to use at the point-of-care, is being used in the TTANGO randomised controlled trial (RCT in 12 remote Australian health services with a high burden of sexually transmissible infections (STIs. This represents the first ever routine use of a molecular point-of-care diagnostic for STIs in primary care. The purpose of this study was to explore the acceptability of the GeneXpert to primary care staff in remote Australia.In-depth qualitative interviews were conducted with 16 staff (registered or enrolled nurses and Aboriginal Health Workers/Practitioners trained and experienced with GeneXpert testing. Interviews were digitally-recorded and transcribed verbatim prior to content analysis.Most participants displayed positive attitudes, indicating the test was both easy to use and useful in their clinical context. Participants indicated that point-of-care testing had improved management of STIs, resulting in more timely and targeted treatment, earlier commencement of partner notification, and reduced follow up efforts associated with client recall. Staff expressed confidence in point-of-care test results and treating patients on this basis, and reported greater job satisfaction. While point-of-care testing did not negatively impact on client flow, several found the manual documentation processes time consuming, suggesting that improved electronic connectivity and test result transfer between the GeneXpert and patient management systems could overcome this. Managing positive test results in a shorter time frame was challenging for some but most found it satisfying to complete episodes of care more quickly.In the context of a RCT, health professionals working in remote primary care in Australia found the GeneXpert highly

Acceptance of Others, Feeling of Being Accepted and Striving for Being Accepted Among the Representatives of Different Kinds of Occupations

Directory of Open Access Journals (Sweden)

Gergana Stanoeva

2012-05-01

Full Text Available This paper deals with an important issue related to the human attitudes and needs in interpersonal and professional aspects. The theoretical part deals with several psychological components of the self-esteem and esteem of the others – acceptance of the others, feeling of being accepted, need for approval. Some gender differences in manifestations of acceptance and feeling of being accepted at the workplace are discussed. This article presents some empirical data for the degree of acceptance of others, feeling of being accepted and the strive for being accepted among the representatives of helping, pedagogical, administrative and economic occupations, as well as non-qualified workers. The goals of the study were to reveal the interdependency between these constructs and to be found some significant differences between the representatives of the four groups of occupations. The methods of the first study were W. Fey’s scales “Acceptance of others”, and “How do I feel accepted by others”. The method of the second study was Crown and Marlowe Scale for Social Desirability. The results indicated some significant differences in acceptance of others and feeling of being accepted between the non-qualified workers and the representatives of helping, administrative and economic occupations. There were not any significant difference in strive for being accepted between the fouroccupational groups.

Similar estimates of temperature impacts on global wheat yield by three independent methods

DEFF Research Database (Denmark)

Liu, Bing; Asseng, Senthold; Müller, Christoph

2016-01-01

The potential impact of global temperature change on global crop yield has recently been assessed with different methods. Here we show that grid-based and point-based simulations and statistical regressions (from historic records), without deliberate adaptation or CO2 fertilization effects, produ......-method ensemble, it was possible to quantify ‘method uncertainty’ in addition to model uncertainty. This significantly improves confidence in estimates of climate impacts on global food security.......The potential impact of global temperature change on global crop yield has recently been assessed with different methods. Here we show that grid-based and point-based simulations and statistical regressions (from historic records), without deliberate adaptation or CO2 fertilization effects, produce...... similar estimates of temperature impact on wheat yields at global and national scales. With a 1 °C global temperature increase, global wheat yield is projected to decline between 4.1% and 6.4%. Projected relative temperature impacts from different methods were similar for major wheat-producing countries...

Similar Estimates of Temperature Impacts on Global Wheat Yield by Three Independent Methods

Science.gov (United States)

Liu, Bing; Asseng, Senthold; Muller, Christoph; Ewart, Frank; Elliott, Joshua; Lobell, David B.; Martre, Pierre; Ruane, Alex C.; Wallach, Daniel; Jones, James W.;

Similar estimates of temperature impacts on global wheat yield by three independent methods

Science.gov (United States)

Liu, Bing; Asseng, Senthold; Müller, Christoph; Ewert, Frank; Elliott, Joshua; Lobell, David B.; Martre, Pierre; Ruane, Alex C.; Wallach, Daniel; Jones, James W.; Rosenzweig, Cynthia; Aggarwal, Pramod K.; Alderman, Phillip D.; Anothai, Jakarat; Basso, Bruno; Biernath, Christian; Cammarano, Davide; Challinor, Andy; Deryng, Delphine; Sanctis, Giacomo De; Doltra, Jordi; Fereres, Elias; Folberth, Christian; Garcia-Vila, Margarita; Gayler, Sebastian; Hoogenboom, Gerrit; Hunt, Leslie A.; Izaurralde, Roberto C.; Jabloun, Mohamed; Jones, Curtis D.; Kersebaum, Kurt C.; Kimball, Bruce A.; Koehler, Ann-Kristin; Kumar, Soora Naresh; Nendel, Claas; O'Leary, Garry J.; Olesen, Jørgen E.; Ottman, Michael J.; Palosuo, Taru; Prasad, P. V. Vara; Priesack, Eckart; Pugh, Thomas A. M.; Reynolds, Matthew; Rezaei, Ehsan E.; Rötter, Reimund P.; Schmid, Erwin; Semenov, Mikhail A.; Shcherbak, Iurii; Stehfest, Elke; Stöckle, Claudio O.; Stratonovitch, Pierre; Streck, Thilo; Supit, Iwan; Tao, Fulu; Thorburn, Peter; Waha, Katharina; Wall, Gerard W.; Wang, Enli; White, Jeffrey W.; Wolf, Joost; Zhao, Zhigan; Zhu, Yan

2016-12-01

The potential impact of global temperature change on global crop yield has recently been assessed with different methods. Here we show that grid-based and point-based simulations and statistical regressions (from historic records), without deliberate adaptation or CO2 fertilization effects, produce similar estimates of temperature impact on wheat yields at global and national scales. With a 1 °C global temperature increase, global wheat yield is projected to decline between 4.1% and 6.4%. Projected relative temperature impacts from different methods were similar for major wheat-producing countries China, India, USA and France, but less so for Russia. Point-based and grid-based simulations, and to some extent the statistical regressions, were consistent in projecting that warmer regions are likely to suffer more yield loss with increasing temperature than cooler regions. By forming a multi-method ensemble, it was possible to quantify `method uncertainty’ in addition to model uncertainty. This significantly improves confidence in estimates of climate impacts on global food security.

Yields of crops on a rhodic ferralsol in southern Brazil in relation to ...

African Journals Online (AJOL)

Even though no-tillage, crop rotation management systems have been accepted as useful for sustaining crop production, there is the need to identify which crops can be used for such rotations. This study evaluated the dry matter and grain yields of eight winter and two summer crops (maize, Zea mays L. and soybean, ...

Comparison of four different mobile devices for measuring heart rate and ECG with respect to aspects of usability and acceptance by older people.

Science.gov (United States)

Ehmen, Hilko; Haesner, Marten; Steinke, Ines; Dorn, Mario; Gövercin, Mehmet; Steinhagen-Thiessen, Elisabeth

2012-05-01

In the area of product design and usability, most products are developed for the mass-market by technically oriented designers and developers for use by persons who themselves are also technically adept by today's standards. The demands of older people are commonly not given sufficient consideration within the early developmental process. In the present study, the usability and acceptability of four different devices meant to be worn for the measurement of heart rate or ECG were analyzed on the basis of qualitative subjective user ratings and structured interviews of twelve older participants. The data suggest that there was a relatively high acceptance concerning these belts by older adults but none of the four harnesses was completely usable. Especially problematic to the point of limiting satisfaction among older subjects were problems encountered while adjusting the length of the belt and/or closing the locking mechanism. The two devices intended for dedicated heart rate recording yielded the highest user ratings for design, and were clearly preferred for extended wearing time. Yet for all the devices participants identified several important deficiencies in their design, as well as suggestions for improvement. We conclude that the creation of an acceptable monitoring device for older persons requires designers and developers to consider the special demands and abilities of the target group. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Intensity cut-points for the Respiratory Distress Observation Scale

Science.gov (United States)

Campbell, Margaret L; Templin, Thomas N

2015-01-01

Background The Respiratory Distress Observation Scale© is an innovative solution to assessment when a dyspnea report cannot be elicited. The Respiratory Distress Observation Scale has acceptable reliability and validity psychometrics. Aim To identify distress-intensity cut-points of the Respiratory Distress Observation Scale. Design Receiver operating characteristic curve analysis was conducted with inpatients stratified by four levels of respiratory distress—none, mild, moderate, or severe. Patients provided three self-report measures of dyspnea: dichotomous (yes/no); a ranking of none, mild, moderate, or severe; and a numerical rating scale. Respiratory distress was assessed using the Respiratory Distress Observation Scale instrument. Setting/participants Participants were 136 adult inpatients, mean age 61.8 years (standard deviation = 13.18 years), 89.7% African American, and 56.6% female, who were recruited from an urban, tertiary care hospital in the Midwest of the United States. Results In all, 47% (n = 64) self-reported dyspnea (yes/no). Ranking was distributed as follows: none = 36, mild = 35, moderate = 40, and severe = 25. Numerical rating scale scores ranged from 0 to 10, mean = 4.99 (standard deviation = 2.9). Respiratory Distress Observation Scale scores ranged from 0 to 7, median (interquartile range) = 2 (1–3). Receiver operating characteristic curve analysis–determined Respiratory Distress Observation Scale score of 0–2 suggests little or no respiratory distress; score ≥3 signified moderate to severe distress. Conclusion A Respiratory Distress Observation Scale score ≥3 signifies a patient’s need for palliation of respiratory distress. An end-point for identifying responsiveness to treatment, in other words, respiratory comfort, is Respiratory Distress Observation Scale <3. Because patients with imminent respiratory failure, as typified by dying patients, were not represented yielding lower than expected Respiratory Distress

Strain-based plastic instability acceptance criteria for ferritic steel safety class 1 nuclear components under level D

International Nuclear Information System (INIS)

Kim, Ji Su; Lee, Han Sang; Kim, Yun Jae; Kim, Jong Sung; Kim, Jin Won

2015-01-01

This paper proposes strain-based acceptance criteria for assessing plastic instability of the safety class 1 nuclear components made of ferritic steel during level D service loads. The strain-based criteria were proposed with two approaches: (1) a section average approach and (2) a critical location approach. Both approaches were based on the damage initiation point corresponding to the maximum load-carrying capability point instead of the fracture point via tensile tests and finite element analysis (FEA) for the notched specimen under uni-axial tensile loading. The two proposed criteria were reviewed from the viewpoint of design practice and philosophy to select a more appropriate criterion. As a result of the review, it was found that the section average approach is more appropriate than the critical location approach from the viewpoint of design practice and philosophy. Finally, the criterion based on the section average approach was applied to a simplified reactor pressure vessel (RPV) outlet nozzle subject to SSE loads. The application shows that the strain-based acceptance criteria can consider cumulative damages caused by the sequential loads unlike the stress-based acceptance criteria and can reduce the over conservatism of the stress-based acceptance criteria, which often occurs for level D service loads.

Strain-based plastic instability acceptance criteria for ferritic steel safety class 1 nuclear components under level D

Energy Technology Data Exchange (ETDEWEB)

Kim, Ji Su; Lee, Han Sang; Kim, Yun Jae [Dept. of Mechanical Engineering, Korea University, Seoul (Korea, Republic of); Kim, Jong Sung [Dept. of Mechanical Engineering, Sunchon National University, Suncheon (Korea, Republic of); Kim, Jin Won [Dept. of Nuclear Engineering, Chosun University, Gwangju (Korea, Republic of)

2015-04-15

This paper proposes strain-based acceptance criteria for assessing plastic instability of the safety class 1 nuclear components made of ferritic steel during level D service loads. The strain-based criteria were proposed with two approaches: (1) a section average approach and (2) a critical location approach. Both approaches were based on the damage initiation point corresponding to the maximum load-carrying capability point instead of the fracture point via tensile tests and finite element analysis (FEA) for the notched specimen under uni-axial tensile loading. The two proposed criteria were reviewed from the viewpoint of design practice and philosophy to select a more appropriate criterion. As a result of the review, it was found that the section average approach is more appropriate than the critical location approach from the viewpoint of design practice and philosophy. Finally, the criterion based on the section average approach was applied to a simplified reactor pressure vessel (RPV) outlet nozzle subject to SSE loads. The application shows that the strain-based acceptance criteria can consider cumulative damages caused by the sequential loads unlike the stress-based acceptance criteria and can reduce the over conservatism of the stress-based acceptance criteria, which often occurs for level D service loads.

Identifying drivers for consumer acceptance and purchase intent of corn tortilla.

Science.gov (United States)

Herrera-Corredor, J A; Saidu, J E P; Khachatryan, A; Prinyawiwatkul, W; Carballo-Carballo, A; Zepeda-Bautista, R

2007-11-01

The traditional production of corn tortilla has been modified by new processing technologies to make possible a commercial-scale production; this practice has resulted in products having sensory properties different from those produced by the traditional method. There is no published information on sensory attributes driving acceptance and purchase intent of corn tortillas. Identifying sensory drivers for acceptance and purchase intent of corn tortillas will help commercially produce products that satisfy consumers' expectations. A consumer study was conducted to evaluate acceptance and purchase intent of corn tortillas and determine drivers of acceptance and purchase intent of the products. Ten samples of corn tortillas were selected to represent a variety of corn tortillas available in the Mexican market. Three hundred Mexican consumers evaluated acceptability of appearance, color, thickness, rollability, resistance to tearing, aroma, chewiness, taste and aftertaste, and overall liking using a 9-point hedonic scale. Overall acceptance and purchase intent were determined with a yes/no scale. Analysis of variance and multivariate analysis of variance revealed that consumers were able to differentiate differences in sensory acceptability among 10 samples. For example, 2 homemade and 1 small commercial-scale samples, with an overall liking score of 6.6 to 6.7, were more acceptable than others. Rollability, resistance to tearing, and chewiness were attributes underlying overall differences among 10 samples. Attributes determining overall acceptance of corn tortillas were chewiness and overall liking. Purchase intent was influenced by overall appearance, rollability, chewiness, taste, and overall liking. This study revealed critical sensory attributes and their weights given by Mexican consumers when making decisions for acceptance and purchase intent of corn tortilla.

Nuclear recoil scintillation and ionisation yields in liquid xenon from ZEPLIN-III data

Energy Technology Data Exchange (ETDEWEB)

Horn, M., E-mail: m.horn@imperial.ac.uk [High Energy Physics group, Blackett Laboratory, Imperial College London (United Kingdom); Belov, V.A.; Akimov, D.Yu. [Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Araujo, H.M. [High Energy Physics group, Blackett Laboratory, Imperial College London (United Kingdom); Barnes, E.J. [School of Physics and Astronomy, SUPA University of Edinburgh (United Kingdom); Burenkov, A.A. [Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Chepel, V. [LIP-Coimbra and Department of Physics of the University of Coimbra (Portugal); Currie, A. [High Energy Physics group, Blackett Laboratory, Imperial College London (United Kingdom); Edwards, B. [Particle Physics Department, STFC Rutherford Appleton Laboratory, Chilton (United Kingdom); Ghag, C.; Hollingsworth, A. [School of Physics and Astronomy, SUPA University of Edinburgh (United Kingdom); Kalmus, G.E. [Particle Physics Department, STFC Rutherford Appleton Laboratory, Chilton (United Kingdom); Kobyakin, A.S.; Kovalenko, A.G. [Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Lebedenko, V.N. [High Energy Physics group, Blackett Laboratory, Imperial College London (United Kingdom); Lindote, A. [LIP-Coimbra and Department of Physics of the University of Coimbra (Portugal); Particle Physics Department, STFC Rutherford Appleton Laboratory, Chilton (United Kingdom); Lopes, M.I. [LIP-Coimbra and Department of Physics of the University of Coimbra (Portugal); Luescher, R.; Majewski, P. [Particle Physics Department, STFC Rutherford Appleton Laboratory, Chilton (United Kingdom); Murphy, A.StJ. [School of Physics and Astronomy, SUPA University of Edinburgh (United Kingdom)

2011-11-24

Scintillation and ionisation yields for nuclear recoils in liquid xenon above 10 keV{sub nr} (nuclear recoil energy) are deduced from data acquired using broadband Am-Be neutron sources. The nuclear recoil data from several exposures to two sources were compared to detailed simulations. Energy-dependent scintillation and ionisation yields giving acceptable fits to the data were derived. Efficiency and resolution effects are treated using a light collection Monte Carlo, measured photomultiplier response profiles and hardware trigger studies. A gradual fall in scintillation yield below {approx}40 keV{sub nr} is found, together with a rising ionisation yield; both are in agreement with the latest independent measurements. The analysis method is applied to the most recent ZEPLIN-III data, acquired with a significantly upgraded detector and a precision-calibrated Am-Be source, as well as to the earlier data from the first run in 2008. A new method for deriving the recoil scintillation yield, which includes sub-threshold S1 events, is also presented which confirms the main analysis.

Three points of view in transport theory

Energy Technology Data Exchange (ETDEWEB)

Ruben, Panta Pazos [Faculdade de Matematica, PUCRS, Porto Alegre, RS (Brazil); Tilio de Vilhena, M. [Instituto de Matematica, UFRGS, Porto Alegre, RS (Brazil)

2001-07-01

A lot of efforts in Transport Theory is used to develop numerical methods or hybrid numerical-analytical techniques. We present in this work three points of view about transport problems. First the C0 semigroup approach, in which the free transport operator {psi} {yields} {mu} {nabla} generates an strongly continuous semigroup. The operators operator {psi} {yields} {sigma}t and operator {psi} {yields} {integral} {nabla} k(x,{mu},{mu}') {psi}(x,{mu}') d{mu}' are bounded operators, and by perturbation the transport operator {psi} {yields} {mu} {nabla} {psi} + {sigma}t {psi} - K {psi} also generates an strongly continuous semigroup. To prove the convergence of the approximations of a numerical methods to the exact solution we use the approximation theorem of C0 semi-groups in canonical form. In other way, the discrete schemes theory is employed in searching the rate of convergence of numerical techniques in transport theory. For 1D dependent of time transport problem and two-dimensional steady state problem we summarize some estimates, incorporating different boundary conditions. Finally we give a survey about the dynamical behavior of the SN approximations. In order to give a unified approach, some results illustrates the equivalence of the three points of views for the case of the steady-state transport problem for slab geometry. (author)

Determinants of accepting non-invasive ventilation treatment in motor neurone disease: a quantitative analysis at point of need.

Science.gov (United States)

Cousins, Rosanna; Ando, Hikari; Thornton, Everard; Chakrabarti, Biswajit; Angus, Robert; Young, Carolyn

2013-01-01

Objectives : Motor neurone disease (MND) progressively damages the nervous system causing wasting to muscles, including those used for breathing. There is robust evidence that non-invasive ventilation (NIV) relieves respiratory symptoms and improves quality of life in MND. Nevertheless, about a third of those who would benefit from NIV decline the treatment. The purpose of the study was to understand this phenomenon. Design : A cross-sectional quantitative analysis. Methods : Data including age, sex, MND symptomatology, general physical and mental health and psychological measures were collected from 27 patients and their family caregivers at the point of being offered ventilatory support based on physiological markers. Results : Quantitative analyses indicated no difference in patient characteristics or symptomatology between those who tolerated ( n  = 17) and those who declined ( n  = 10) NIV treatment. A comparison of family caregivers found no differences in physical or mental health or in caregiving distress, emphasising that this was high in both groups; however, family caregivers supporting NIV treatment were significantly more resilient, less neurotic and less anxious than family caregivers who did not. Regression analyses, forcing MND symptoms to enter the equation first, found caregiver resilience:commitment the strongest predictor of uptake of NIV treatment adding 22% to the 56% explained variance. Conclusion : Patients who tolerated NIV treatment had family caregivers who cope through finding meaning and purpose in their situation. Psychological support and proactive involvement for family caregivers in the management of the illness situation is indicated if acceptance of NIV treatment is to be maximised in MND.

HOLSTEIN CATTLE REPRODUCTION IN RELATION ON MILK YIELD AND BODY CONDITION SCORE

Directory of Open Access Journals (Sweden)

Miroslav MARŠÁLEK

2009-06-01

Full Text Available One of the basic conditions of the economical success in milk production is the high and periodic reproduction of the cows. That means the parturition of a healthy calf from every cow per a year. The development and level of reproduction functions is very susceptible to the quantity and mainly quality of nutrition. The insuffi ciency in nutrition is strongly related to the fertility. The aim of this study was to evaluate the reproduction indicators depending upon the level of the milk yield and body condition of the Holstein cows at the family-owned farm. The basic dataset was obtained during the years 2004 – 2007. The milk yield and fertility data were gained from the herd records. The extreme values were removed from the basic set. Body condition score was evaluated every month. The groups according to the milk yield level and body condition score were evaluated. The basic statistical characteristics were determined in the groups of cows and in the evaluated sets. The effect of particular factors was proved by the one-factorial analysis of variance ANOVA. Increasing milk yield in the groups with milk yield up to 7000 kg of milk, 7000-8000 kg and more than 8000 kg had negative impact on the reproduction indicators. The differences in the length of calving to fififi rst service interval among particular groups were statistically signifififi cant (P ≥ 0.01. The average length of this interval was 96, 111 and 122 days for 1st, 2nd and 3rd group, respectively. In addition, the average length of calving to conception (service period interval was 154, 165 and 171 days. There were found no signifi cant differences in numbers of services per conception. The average BCS at calving was 3.59 points. After calving BCS level decreased till the 6th month of lactation, where its level 2.43 points, then the BCS level increased. Average BCS level at conception was under 2.5 points. The variation of BCS during the lactation was 2 points.

Autonomous Vehicles Require Socio-Political Acceptance-An Empirical and Philosophical Perspective on the Problem of Moral Decision Making.

Science.gov (United States)

Bergmann, Lasse T; Schlicht, Larissa; Meixner, Carmen; König, Peter; Pipa, Gordon; Boshammer, Susanne; Stephan, Achim

2018-01-01

Autonomous vehicles, though having enormous potential, face a number of challenges. As a computer system interacting with society on a large scale and human beings in particular, they will encounter situations, which require moral assessment. What will count as right behavior in such situations depends on which factors are considered to be both morally justified and socially acceptable. In an empirical study we investigated what factors people recognize as relevant in driving situations. The study put subjects in several "dilemma" situations, which were designed to isolate different and potentially relevant factors. Subjects showed a surprisingly high willingness to sacrifice themselves to save others, took the age of potential victims in a crash into consideration and were willing to swerve onto a sidewalk if this saved more lives. The empirical insights are intended to provide a starting point for a discussion, ultimately yielding societal agreement whereby the empirical insights should be balanced with philosophical considerations.

Psychometric Properties of the Persian Version of the Social Anxiety - Acceptance and Action Questionnaire.

Science.gov (United States)

Soltani, Esmail; Bahrainian, Seyed Abdolmajid; Masjedi Arani, Abbas; Farhoudian, Ali; Gachkar, Latif

2016-06-01

Social anxiety disorder is often related to specific impairment or distress in different areas of life, including occupational, social and family settings. The purpose of the present study was to examine the psychometric properties of the persian version of the social anxiety-acceptance and action questionnaire (SA-AAQ) in university students. In this descriptive cross-sectional study, 324 students from Shahid Beheshti University of Medical Sciences participated via the cluster sampling method during year 2015. Factor analysis by the principle component analysis method, internal consistency analysis, and convergent and divergent validity were conducted to examine the validity of the SA-AAQ. To calculate the reliability of the SA-AAQ, Cronbach's alpha and test-retest reliability were used. The results from factor analysis by principle component analysis method yielded three factors that were named acceptance, action and non-judging of experience. The three-factor solution explained 51.82% of the variance. Evidence for the internal consistency of SA-AAQ was obtained via calculating correlations between SA-AAQ and its subscales. Support for convergent and discriminant validity of the SA-AAQ via its correlations with the acceptance and action questionnaire - II, social interaction anxiety scale, cognitive fusion questionnaire, believability of anxious feelings and thoughts questionnaire, valued living questionnaire and WHOQOL- BREF was obtained. The reliability of the SA-AAQ via calculating Cronbach's alpha and test-retest coefficients yielded values of 0.84 and 0.84, respectively. The Iranian version of the SA-AAQ has acceptable levels of psychometric properties in university students. The SA-AAQ is a valid and reliable measure to be utilized in research investigations and therapeutic interventions.

Acceptability and Feasibility of Integrating Point-of-Care Diagnostic Testing of Sexually Transmitted Infections into a South African Antenatal Care Program for HIV-Infected Pregnant Women

Directory of Open Access Journals (Sweden)

E. Morikawa

2018-01-01

Full Text Available Background. Chlamydia trachomatis (CT, Neisseria gonorrhoeae (NG, and Trichomonas vaginalis (TV infections may increase the risk of vertical transmission of the human immunodeficiency virus (HIV. In resource-limited settings, symptomatic screening, and syndromic management of sexually transmitted infections (STIs during pregnancy continue to be the standard of care. In the absence of diagnostic testing, asymptomatic infections in pregnant women go untreated. Objective. To describe the acceptability and feasibility of integrating diagnostic STI screening into first antenatal care visits for HIV-infected pregnant women. Methods. HIV-infected pregnant women were recruited during their first antenatal care visit from three antenatal care clinics in Tshwane District, South Africa, between June 2016 and October 2017. Self-collected vaginal swabs were used to screen for CT, NG, and TV with a diagnostic point-of-care (POC nucleic acid amplification test. Those with STIs were provided treatment per South African national guidelines. Results. Of 442 eligible women, 430 (97.3% agreed to participate and were tested. Of those with a positive STI test result (n = 173; 40.2%, 159 (91.9% received same-day results and treatment; 100% of STI-infected women were treated within seven days. Conclusions. Integration of POC diagnostic STI screening into first-visit antenatal care services was feasible and highly acceptable for HIV-infected pregnant women.

Acceptability and potential effectiveness of commercial portion control tools amongst people with obesity.

Science.gov (United States)

Almiron-Roig, Eva; Domínguez, Angélica; Vaughan, David; Solis-Trapala, Ivonne; Jebb, Susan A

2016-12-01

Exposure to large portion sizes is a risk factor for obesity. Specifically designed tableware may modulate how much is eaten and help with portion control. We examined the experience of using a guided crockery set (CS) and a calibrated serving spoon set (SS) by individuals trying to manage their weight. Twenty-nine obese adults who had completed 7-12 weeks of a community weight-loss programme were invited to use both tools for 2 weeks each, in a crossover design, with minimal health professional contact. A paper-based questionnaire was used to collect data on acceptance, perceived changes in portion size, frequency, and type of meal when the tool was used. Scores describing acceptance, ease of use and perceived effectiveness were derived from five-point Likert scales from which binary indicators (high/low) were analysed using logistic regression. Mean acceptance, ease of use and perceived effectiveness were moderate to high (3·7-4·4 points). Tool type did not have an impact on indicators of acceptance, ease of use and perceived effectiveness (P>0·32 for all comparisons); 55 % of participants used the CS on most days v. 21 % for the SS. The CS was used for all meals, whereas the SS was mostly used for evening meals. Self-selected portion sizes increased for vegetables and decreased for chips and potatoes with both tools. Participants rated both tools as equally acceptable, easy to use and with similar perceived effectiveness. Formal trials to evaluate the impact of such tools on weight control are warranted.

“I Do Feel Like a Scientist at Times”: A Qualitative Study of the Acceptability of Molecular Point-Of-Care Testing for Chlamydia and Gonorrhoea to Primary Care Professionals in a Remote High STI Burden Setting

Science.gov (United States)

Natoli, Lisa; Guy, Rebecca J.; Shephard, Mark; Causer, Louise; Badman, Steven G.; Hengel, Belinda; Tangey, Annie; Ward, James; Coburn, Tony; Anderson, David; Kaldor, John; Maher, Lisa

2015-01-01

Background Point-of-care tests for chlamydia (CT) and gonorrhoea (NG) could increase the uptake and timeliness of testing and treatment, contribute to improved disease control and reduce reproductive morbidity. The GeneXpert (Xpert CT/NG assay), suited to use at the point-of-care, is being used in the TTANGO randomised controlled trial (RCT) in 12 remote Australian health services with a high burden of sexually transmissible infections (STIs). This represents the first ever routine use of a molecular point-of-care diagnostic for STIs in primary care. The purpose of this study was to explore the acceptability of the GeneXpert to primary care staff in remote Australia. Methods In-depth qualitative interviews were conducted with 16 staff (registered or enrolled nurses and Aboriginal Health Workers/Practitioners) trained and experienced with GeneXpert testing. Interviews were digitally-recorded and transcribed verbatim prior to content analysis. Results Most participants displayed positive attitudes, indicating the test was both easy to use and useful in their clinical context. Participants indicated that point-of-care testing had improved management of STIs, resulting in more timely and targeted treatment, earlier commencement of partner notification, and reduced follow up efforts associated with client recall. Staff expressed confidence in point-of-care test results and treating patients on this basis, and reported greater job satisfaction. While point-of-care testing did not negatively impact on client flow, several found the manual documentation processes time consuming, suggesting that improved electronic connectivity and test result transfer between the GeneXpert and patient management systems could overcome this. Managing positive test results in a shorter time frame was challenging for some but most found it satisfying to complete episodes of care more quickly. Conclusions In the context of a RCT, health professionals working in remote primary care in Australia

Interior point algorithms theory and analysis

CERN Document Server

Ye, Yinyu

2011-01-01

The first comprehensive review of the theory and practice of one of today's most powerful optimization techniques. The explosive growth of research into and development of interior point algorithms over the past two decades has significantly improved the complexity of linear programming and yielded some of today's most sophisticated computing techniques. This book offers a comprehensive and thorough treatment of the theory, analysis, and implementation of this powerful computational tool. Interior Point Algorithms provides detailed coverage of all basic and advanced aspects of the subject.

The influence of landing points on the sputtering of mono-crystal solids due to cluster impacting

Energy Technology Data Exchange (ETDEWEB)

Niu, Guo-jian; Li, Xiao-chun; Xu, Qian; Yang, Zhong-shi, E-mail: zsyang@ipp.ac.cn; Luo, Guang-nan, E-mail: gnluo@ipp.ac.cn

2017-01-15

The mechanism of sputtering due to cluster impacting which has been widely studied is an important but unsolved problem. In present research, we discuss the effect of the landing point on the sputtering with the method of molecular dynamics. The results show that the landing points play significant roles on sputter yield when the temperature of target is low. Specific landing points can cause particular sputtering patterns which lead to different sputtering yield and moving directions of sputtered atoms. The mechanism of this phenomenon is that specific landing keeps symmetries and anisotropies of target lattice, which influence the sputtering yield.

Use of abrupt strain path change for determining subsequent yield surface

DEFF Research Database (Denmark)

Kuroda, Mitsutoshi; Tvergaard, Viggo

1999-01-01

is prescribed, which makes the stress point move quickly along the yield surface. It is assumed that a closed-loop testing machine is used for the experiment, so that the strain path can be prescribed according to strain gauge measurements. Relative to the standard method of determining yield surface shapes...... by probing in many different stress directions from the elastic region, using some chosen plastic strain offset, the main advantage of the proposed method is that elastic unloading is not needed prior to tracing the yield surface. The method is illustrated here by a few analyses, first for the simplest how...

Brazilian Soybean Yields and Yield Gaps Vary with Farm Size

Science.gov (United States)

Jeffries, G. R.; Cohn, A.; Griffin, T. S.; Bragança, A.

2017-12-01

Understanding the farm size-specific characteristics of crop yields and yield gaps may help to improve yields by enabling better targeting of technical assistance and agricultural development programs. Linking remote sensing-based yield estimates with property boundaries provides a novel view of the relationship between farm size and yield structure (yield magnitude, gaps, and stability over time). A growing literature documents variations in yield gaps, but largely ignores the role of farm size as a factor shaping yield structure. Research on the inverse farm size-productivity relationship (IR) theory - that small farms are more productive than large ones all else equal - has documented that yield magnitude may vary by farm size, but has not considered other yield structure characteristics. We examined farm size - yield structure relationships for soybeans in Brazil for years 2001-2015. Using out-of-sample soybean yield predictions from a statistical model, we documented 1) gaps between the 95th percentile of attained yields and mean yields within counties and individual fields, and 2) yield stability defined as the standard deviation of time-detrended yields at given locations. We found a direct relationship between soy yields and farm size at the national level, while the strength and the sign of the relationship varied by region. Soybean yield gaps were found to be inversely related to farm size metrics, even when yields were only compared to farms of similar size. The relationship between farm size and yield stability was nonlinear, with mid-sized farms having the most stable yields. The work suggests that farm size is an important factor in understanding yield structure and that opportunities for improving soy yields in Brazil are greatest among smaller farms.

[Prediction of the side-cut product yield of atmospheric/vacuum distillation unit by NIR crude oil rapid assay].

Science.gov (United States)

Wang, Yan-Bin; Hu, Yu-Zhong; Li, Wen-Le; Zhang, Wei-Song; Zhou, Feng; Luo, Zhi

2014-10-01

In the present paper, based on the fast evaluation technique of near infrared, a method to predict the yield of atmos- pheric and vacuum line was developed, combined with H/CAMS software. Firstly, the near-infrared (NIR) spectroscopy method for rapidly determining the true boiling point of crude oil was developed. With commercially available crude oil spectroscopy da- tabase and experiments test from Guangxi Petrochemical Company, calibration model was established and a topological method was used as the calibration. The model can be employed to predict the true boiling point of crude oil. Secondly, the true boiling point based on NIR rapid assay was converted to the side-cut product yield of atmospheric/vacuum distillation unit by H/CAMS software. The predicted yield and the actual yield of distillation product for naphtha, diesel, wax and residual oil were compared in a 7-month period. The result showed that the NIR rapid crude assay can predict the side-cut product yield accurately. The near infrared analytic method for predicting yield has the advantages of fast analysis, reliable results, and being easy to online operate, and it can provide elementary data for refinery planning optimization and crude oil blending.

Using NDVI and guided sampling to develop yield prediction maps of processing tomato crop

Energy Technology Data Exchange (ETDEWEB)

Fortes, A.; Henar Prieto, M. del; García-Martín, A.; Córdoba, A.; Martínez, L.; Campillo, C.

2015-07-01

The use of yield prediction maps is an important tool for the delineation of within-field management zones. Vegetation indices based on crop reflectance are of potential use in the attainment of this objective. There are different types of vegetation indices based on crop reflectance, the most commonly used of which is the NDVI (normalized difference vegetation index). NDVI values are reported to have good correlation with several vegetation parameters including the ability to predict yield. The field research was conducted in two commercial farms of processing tomato crop, Cantillana and Enviciados. An NDVI prediction map developed through ordinary kriging technique was used for guided sampling of processing tomato yield. Yield was studied and related with NDVI, and finally a prediction map of crop yield for the entire plot was generated using two geostatistical methodologies (ordinary and regression kriging). Finally, a comparison was made between the yield obtained at validation points and the yield values according to the prediction maps. The most precise yield maps were obtained with the regression kriging methodology with RRMSE values of 14% and 17% in Cantillana and Enviciados, respectively, using the NDVI as predictor. The coefficient of correlation between NDVI and yield was correlated in the point samples taken in the two locations, with values of 0.71 and 0.67 in Cantillana and Enviciados, respectively. The results suggest that the use of a massive sampling parameter such as NDVI is a good indicator of the distribution of within-field yield variation. (Author)

Man, society, technology. Reference points in the debate on technology acceptance. Mensch - Gesellschaft - Technik. Orientierungspunkte in der Technikakzeptanzdebatte

Energy Technology Data Exchange (ETDEWEB)

Kistler, E.; Jaufmann, D. (Internationales Inst. fuer Empirische Sozialoekonomie, Stadtbergen (Germany, F.R.)) (eds.)

1990-01-01

The acceptance of technological risks, which is discussed today mainly in the context of large-scale technologies, has become the subject of political argument, of power politics and also of negotiation. Its evaluation and assessment depend not least on the current atmosphere for decisions and the specific subject. Acceptance research - this is one of the central theses of this book - is not (only) a reactive instrument for later fine-tuning after the probability of risk is evident, but can also be more. However, it requires to this end 'cleaner' and more comprehensible methods; the recognition of its viability limits is also necessary. It provides then a possibility for a rational formulation of policies on the basis of a long-standing, and certainly partly superfluous technological-political dialogue. (orig.).

The Effect of Prior Knowledge on Price Acceptability and the Type of Information Examined.

OpenAIRE

Rao, Akshay R; Sieben, Wanda A

1992-01-01

This article assesses whether differences in prior knowledge result in differences in (1) price acceptability and (2) the extent to which different types of information are examined. Using a personal computer-based methodology, subjects who varied in their prior product knowledge provided price responses, and the time they spent examining various kinds of information was measured. Acceptable price-range and points (price limits) were found to be lowest for low-knowledge subjects. Further, the...

Journalism ethics and acceptance of gifts: a view from Madrid journalists

Directory of Open Access Journals (Sweden)

Susana Herrera Damas

2009-12-01

Full Text Available The aim of this article is to present the partial results of a larger research project on journalistic ethics from the point of view of the professionals themselves. Specifically, the following pages analyze the perception of Madrid journalists with respect to the legitimacy of accepting various gifts when carrying out their work. The results of 30 in-depth interviews and 410 surveys of newspaper, radio, television, online and press office journalists who carry out their professional activity in the Autonomous Community of Madrid show that this group is very reluctant to accept gifts with a monetary value of over €200, or to carry out activities financed by a news source. Fewer problems arise regarding acceptance of presents of nominal value of a promotional merchandising nature, free tickets to shows and exhibitions, or paid meals and trips.

JOURNALISM ETHICS AND ACCEPTANCE OF GIFTS: A view from Madrid journalists

Directory of Open Access Journals (Sweden)

Carlos Maciá Baber

2009-12-01

Full Text Available The aim of this article is to present the partial results of a largerresearch project on journalistic ethics from the point of view of the professionals themselves. Specifically, the following pages analyze the perception of Madrid journalists with respect to the legitimacy of accepting various gifts when carrying out their work. The results of 30 in-depth interviews and 410 surveys of newspaper, radio, television, online and press office journalists who carry out their professional activity in the Autonomous Community of Madrid show that this group is very reluctant to accept gifts with a monetary value of over €200, or to carry out activities financed by a news source. Fewer problems arise regarding acceptance of presents of nominal value of a promotional merchandising nature, free tickets to shows and exhibitions, or paid meals and trips.

Acceptance on Mobile Learning via SMS: A Rasch Model Analysis

Directory of Open Access Journals (Sweden)

Issham Ismail

2010-04-01

Full Text Available This study investigated whether mobile learning via Short Message Service (SMS-learning is accepted by the students enrolled in the distance learning academic programme in the Universiti Sains Malaysia. This study explored the impact of perceived usefulness, perceived ease of use and usability of the system to their acceptability. The survey was constructed using a questionnaire consisting of statements regarding the participants’ demographics, experiences in and perception of using mobile learning via SMS, involving 105 students from management and sciences disciplines. The Rasch Model Analysis was used for measurement correspond to a 5 point Likert. Results indicated that the usability of the system contributed to be effectiveness in assisting the students with their study. Respondents agree that SMS-learning is easy, effective and useful to help them study. However, the results found that there has been a problem in mobile learning that less interaction with lecturers. It implies that the acceptability of students to this mode on communication and interaction is highly endorsed.

Strategy for continuous improvement in IC manufacturability, yield, and reliability

Science.gov (United States)

Dreier, Dean J.; Berry, Mark; Schani, Phil; Phillips, Michael; Steinberg, Joe; DePinto, Gary

1993-01-01

Continual improvements in yield, reliability and manufacturability measure a fab and ultimately result in Total Customer Satisfaction. A new organizational and technical methodology for continuous defect reduction has been established in a formal feedback loop, which relies on yield and reliability, failed bit map analysis, analytical tools, inline monitoring, cross functional teams and a defect engineering group. The strategy requires the fastest detection, identification and implementation of possible corrective actions. Feedback cycle time is minimized at all points to improve yield and reliability and reduce costs, essential for competitiveness in the memory business. Payoff was a 9.4X reduction in defectivity and a 6.2X improvement in reliability of 256 K fast SRAMs over 20 months.

Assessment of saddle-point-mass predictions for astrophysical applications

Energy Technology Data Exchange (ETDEWEB)

Kelic, A.; Schmidt, K.H.

2005-07-01

Using available experimental data on fission barriers and ground-state masses, a detailed study on the predictions of different models concerning the isospin dependence of saddle-point masses is performed. Evidence is found that several macroscopic models yield unrealistic saddle-point masses for very neutron-rich nuclei, which are relevant for the r-process nucleosynthesis. (orig.)

effects of preharvest treatments on yield and chemical composition

African Journals Online (AJOL)

Administrator

altitude of 1197 m above sea level and lies at 9o6'N ... widest point form the upper, middle and lower part of the plant was ... heated in boiling water bath for sufficient time until the ..... al., 1970 reported yield increase in tomato due to nitrogen ...

Acceptability of the rainwater harvesting system to the slum dwellers of Dhaka City.

Science.gov (United States)

Islam, M M; Chou, F N-F; Kabir, M R

2010-01-01

Urban area like Dhaka City, in Bangladesh, has scarcity of safe drinking water which is one of the prominent basic needs for human kind. This study explored the acceptability of harvested rainwater in a densely populated city like Dhaka, using a simple and low cost technology. A total of 200 random people from four slums of water-scarce Dhaka City were surveyed to determine the dwellers' perception on rainwater and its acceptability as a source of drinking water. The questionnaire was aimed at finding the socio-economic condition and the information on family housing, sanitation, health, existing water supply condition, knowledge about rainwater, willingness to accept rainwater as a drinking source etc. A Yield before Spillage (YBS) model was developed to know the actual rainwater availability and storage conditions which were used to justify the effective tank size. Cost-benefit analysis and feasibility analysis were performed using the survey results and the research findings. The survey result and overall study found that the low cost rainwater harvesting technique was acceptable to the slum dwellers as only the potential alternative source of safe drinking water.

Acceptance and purchase intent of US consumers for nonwheat rice butter cakes.

Science.gov (United States)

Sae-Eaw, A; Chompreeda, P; Prinyawiwatkul, W; Haruthaithanasan, V; Suwonsichon, T; Saidu, J E; Xu, Z

2007-03-01

This study evaluated consumer acceptance and purchase intent of nonwheat butter cake formulations prepared with Thai jasmine rice flour. Three nonwheat rice butter cakes were prepared with varying amounts of powdered emulsifier (propylene glycol ester:diacetyl tartaric acid ester of monoglyceride, 8:2) at 0% (product A), 7.5% (product B), and 15% (product C) of the margarine content (15%) in the cake formulation. A commercial wheat-based butter cake served as the control. Consumers (n= 400) evaluated acceptability of 9 sensory attributes using a 9-point hedonic scale. Overall acceptance and purchase intent were determined with a binomial (yes/no) scale. At least 81% of consumers accepted products B and C, of which 42.1% and 47%, respectively, would purchase the products if commercially available. Product A was neither liked nor disliked with an overall liking score of 5.39. The butter cake products were differentiated by textural acceptability (overall texture, softness, and moistness) with a canonical correlation of 0.71 to 0.79. Overall liking and taste influenced overall acceptance and purchase intent. Odor influenced purchase intent (P= 0.0014), but not overall acceptance. The odds ratio of overall liking was 3.462 for purchase intent, indicating the probability of the product being purchased is 3.462 times higher (than not being purchased, P flour with Thai jasmine rice flour for production of butter cake products acceptable to American consumers.

Effect of carrageenan addition on the yield and functional properties of charqui (Jerked Beef

Directory of Open Access Journals (Sweden)

Carlos Eduardo Rocha Garcia

2013-04-01

Full Text Available The objective of this work was to evaluate the application of carrageenan (CAR to improve the functional properties of the jerked beef (JF and to increase its processing yield. JB produced from Vastus lateralis with CAR (1.0% at 25ºC and NaCl (15.0% had approximately 15.0% higher moisture and a 32.0% higher processing yield in comparison to the control samples.JB-CAR presented shear force approximately 5.0 and 20% lower in the samples uncooked salted and desalted cooked, respectively, and sensorial acceptance above 80%. The results demonstrated the possibility of applying carrageenan to jerked beef in order to obtain an increase in the processing yield and a tender product while maintaining the sensorial quality and its intermediate-moisture meat product nature.

Free-ion yield for tetramethylsilane and tetramethylgermanium

International Nuclear Information System (INIS)

Hoshi, Y.; Higuchi, M.; Iso, H.; Sakamoto, M.; Ooyama, K.; Kikuchi, R.; Miyano, K.

1993-01-01

In high energy physics experiments, calorimeters are used to measure the total energy dissipated by the primary particles produced from high energy collisions. In one type of calorimeter, ionization chambers filled with liquid argon are used. The necessity of a cryostat in many cases prevents a compact chamber design. Hence, it is very desirable to have liquid ionization chambers operating at room temperature. From this view point, hydrocarbon liquids are intensively investigated as calorimeter media in high energy physics experiments. TMS and TMG are promising liquid materials because they have the properties of a large electron drift velocity and a large free-ion yield. The free-ion yield determines the sensitivity of the chamber and amplifier system to ionizing particles. Here, free-ion yields from 207 Bi conversion electrons were measured as a function of applied electric field in an ionization chamber filled with tetramethylsilane (TMS) or tetramethylgermanium (TMG), which were purified by simple methods. Also, the mean thermalization length of electrons liberated in the liquid was calculated by fitting a Gaussian form for the distribution function. The total free-ion yield and thermalization length in TMS and TMG were obtained to be 3.1 ± 0.3, 3.5 ± 0.2 and 191 ± 12 angstrom, respectively, including the impurity effect in liquid

Absolute calibration of the neutron yield measurement on JT-60 Upgrade

International Nuclear Information System (INIS)

Nishitani, Takeo; Takeuchi, Hiroshi; Barnes, C.W.

1991-10-01

Absolutely calibrated measurements of the neutron yield are important for the evaluation of the plasma performance such as the fusion gain Q in DD operating tokamaks. Total neutron yield is measured with 235 U and 238 U fission chambers and 3 He proportional counters in JT-60 Upgrade. The in situ calibration was performed by moving the 252 Cf neutron source toroidally through the JT-60 vacuum vessel. Detection efficiencies of three 235 U and two 3 He detectors were measured for 92 locations of the neutron point source in toroidal scans at two different major radii. The total detection efficiency for the torus neutron source was obtained by averaging the point efficiencies over the whole toroidal angle. The uncertainty of the resulting absolute plasma neutron source calibration is estimated to be ± 10%. (author)

Rein tension acceptance in young horses in a voluntary test situation

DEFF Research Database (Denmark)

Christensen, Janne Winther; zharkikh, T.L.; Antoine, A.

2011-01-01

Reasons for performing the study: During riding, horses are frequently exposed to pressure from the rider, e.g. through the bit and reins, but few studies have investigated at which point rein tension becomes uncomfortable for the horse. Objectives: To investigate how much rein tension young...... inexperienced horses are willing to accept in order to obtain a food reward; whether the tension acceptance changes during 3 consecutive test days; and whether rein tension correlates with the expression of conflict behaviour and heart rate. Hypotheses: Pressure-naïve horses will apply only little rein tension...... in the first voluntary trial, but their acceptance will gradually increase. High levels of rein tension will lead to expression of conflict behaviour and increases in heart rate. Methods: Fifteen 2-year-old, bridle-naïve mares were encouraged to stretch their head forward (across a 0.95 m high metal bar...

Bridging the Gap between Social Acceptance and Ethical Acceptability

NARCIS (Netherlands)

Taebi, B.

2016-01-01

New technology brings great benefits, but it can also create new and significant risks. When evaluating those risks in policymaking, there is a tendency to focus on social acceptance. By solely focusing on social acceptance, we could, however, overlook important ethical aspects of technological

Sensory characteristics and consumer acceptability of fermented soybean paste (Doenjang).

Science.gov (United States)

Kim, H G; Hong, J H; Song, C K; Shin, H W; Kim, K O

2010-09-01

This study was conducted to examine the sensory profiles of fermented soybean paste (Doenjang), to understand consumers' acceptability of different types of Doenjang samples and to identify the sensory characteristics that drive consumer acceptability of Doenjang products. Descriptive analysis and consumer acceptability test were conducted for 7 different types of Doenjang samples. The samples included 2 types of Doenjang made by either traditional or commercially modified methods. For the descriptive analysis, 8 trained panelists developed and evaluated 31 descriptors. There were significant differences in all 31 attributes among the samples. Principal component analysis was also performed to summarize the sensory characteristics of the samples. In consumer testing, 200 consumers evaluated the acceptability of Doenjang samples. Significant differences in consumer acceptability were observed among the samples. The consumers preferred the Doenjang samples manufactured using a commercially modified method. In overall point of view, most consumers liked the Doenjang samples that had strong "sweet" and "MSG (monosodium glutamate)" tastes. It appears that "sweet" and "MSG" tastes are the drivers of liking for Doenjang. "Salty" taste, "meju,"traditional Korean soy sauce," and "fermented fish" odor/flavors seem to be the drivers of disliking for Doenjang. Cluster analysis identified 3 subconsumer segments sharing a common preference pattern for the 7 samples within a cluster. The results showed that each consumer cluster preferred different Doenjang samples. External preference mapping was performed to establish the relationships between the sensory attributes and consumer acceptability in each cluster. Consumption of the fermented soybean products is gradually expanding around the world, due to their various health benefits. Therefore, understanding sensory characteristics and consumer acceptability of Doenjang are becoming increasingly important. The intense and complex

CRITICAL CONTROL POINTS ON THE TECHNOLOGICAL FLOW OF PANIFICATION

Directory of Open Access Journals (Sweden)

Gigel PARASCHIV

2013-05-01

Full Text Available Bread and panification products are intended for direct human consumption and underlying nutritional pyramid, it can affect the consumers health in case of biological, chemical or physical contamination, immediate or delayed, by noxious accumulation in the human organism. Only by rigorous compliance of the production rules throughout the technological process can ensure the quality and food safety of these products. If the risk can be prevented, eliminated or reduce to an acceptable level, as a result of a control actions made at that stage, it is considered a Critical Control Point (CCP. There can be checkpoints where it can exert a control action. Thus, the checkpoint is represented by any stage in which the risk factors, biological, chemical or physical, can be controlled in order to prevent, disrupt or reduce them to an acceptable level. This paper is referring to the control points on the technological flow of the bread fabrication, in all phases of this technological flow, laying stress on that points (or phases which can affect security and food safety, through the influence of parameters of any kind on the quality of finished products.

Energy and nutrient intake and acceptability of nutritionally balanced school meals in Filipino students.

Science.gov (United States)

Angeles-Agdeppa, Imelda; Neufingerl, Nicole; Magsadia, Clarita; Hiemstra, Harry; Patalen, Chona; Eilander, Ans

2014-09-01

School meals provide an excellent opportunity to improve children's diet. To investigate dietary intakes and acceptance of nutritionally balanced school meals ("nutrimeals") as compared with regular ("baseline") school meals among Filipino students. The study employed a before-after intervention design with one group. Students 13 to 16 years of age from a public school in Metro Manila (n = 112) consumed baseline school meals for 2 weeks followed by consumption of nutri-meals for 7 weeks. Served meals and plate waste were weighed to calculate food and nutrient intakes. Acceptability of meals was assessed daily in a random subsample using a seven-point hedonic scale. Analysis of covariance corrected for age and sex was conducted to test for differences in nutrient intakes and acceptability between nutri-meals and baseline meals. Feeding nutri-meals resulted in a higher intake of vegetables (95.3 ± 13.8 g), fruit (76.5 ± 6.3 g), and fish (19.1 ± 3.3 g) than baseline meals. Energy and protein intakes significantly increased by 140.7 ± 2.8 kcal and 3.2 ± 0.1 g, respectively. The quality of fat intake improved compared with baseline meals (p 90%) liked both baseline and nutrimeals; however, the mean acceptability score for baseline meals was slightly higher (0.2 ± 0.07 points, p = .004). Nutritionally balanced nutri-meals may be a healthier and acceptable alternative to regular Filipino school meals. Further optimization of nutri-meals is required to meet the nutritional needs of adolescents and reduce sodium content.

Video Game Acceptance: A Meta-Analysis of the Extended Technology Acceptance Model.

Science.gov (United States)

Wang, Xiaohui; Goh, Dion Hoe-Lian

2017-11-01

The current study systematically reviews and summarizes the existing literature of game acceptance, identifies the core determinants, and evaluates the strength of the relationships in the extended technology acceptance model. Moreover, this study segments video games into two categories: hedonic and utilitarian and examines player acceptance of these two types separately. Through a meta-analysis of 50 articles, we find that perceived ease of use (PEOU), perceived usefulness (PU), and perceived enjoyment (PE) significantly associate with attitude and behavioral intention. PE is the dominant predictor of hedonic game acceptance, while PEOU and PU are the main determinants of utilitarian game acceptance. Furthermore, we find that respondent type and game platform are significant moderators. Findings of this study provide critical insights into the phenomenon of game acceptance and suggest directions for future research.

Assessing the impacts of climate change on rice yields in the main rice areas of China

International Nuclear Information System (INIS)

Yao, Fengmei; Xu, Yinglong; Lin, Erda; Yokozawa, Masayuki; Zhang, Jiahua

2007-01-01

This paper assesses the impact of climate change on irrigated rice yield using B2 climate change scenario from the Regional Climate Model (RCM) and CERES-rice model during 2071--2090. Eight typical rice stations ranging in latitude, longitude, and elevation that are located in the main rice ecological zones of China are selected for impact assessment. First, Crop Estimation through Resource and Environment Synthesis (CERES)-rice model is validated using farm experiment data in selected stations. The simulated results represent satisfactorily the trend of flowering duration and yields. The deviation of simulation within ± 10% of observed flowering duration and ± 15% of observed yield. Second, the errors of the outputs of RCM due to the difference of topography between station point and grid point is corrected. The corrected output of the RCM used for simulating rice flowering duration and yield is more reliable than the not corrected. Without CO2 direct effect on crop, the results from the assessment explore that B2 climate change scenario would have a negative impact on rice yield at most rice stations and have little impacts at Fuzhou and Kunming. To find the change of inter-annual rice yield, a preliminary assessment is made based on comparative cumulative probability at low and high yield and the coefficient variable of yield between the B2 scenario and baseline. Without the CO2 direct effect on rice yield, the result indicates that frequency for low yield would increase and it reverses for high yield, and the variance for rice yield would increase. It is concluded that high frequency at low yield and high variances of rice yield could pose a threat to rice yield at most selected stations in the main rice areas of China. With the CO2 direct effect on rice yield, rice yield increase in all selected stations

Assessing the impacts of climate change on rice yields in the main rice areas of China

Energy Technology Data Exchange (ETDEWEB)

Yao, Fengmei [College of Earth Sciences, The Graduate University of the Chinese Academy of Sciences, 19A, Yuquan Road, Beijing, 100049 (China); Xu, Yinglong; Lin, Erda [Agricultural Environment and Sustainable Development Institute, Chinese Academy of Agricultural Sciences, Beijing, 100081 (China); Yokozawa, Masayuki [National Institute for Agro-environmental Sciences, Tsukuba 305-8604 (Japan); Zhang, Jiahua [Chinese Academy of Meteorological Sciences, Beijing, 100081 (China)

2007-02-15

This paper assesses the impact of climate change on irrigated rice yield using B2 climate change scenario from the Regional Climate Model (RCM) and CERES-rice model during 2071--2090. Eight typical rice stations ranging in latitude, longitude, and elevation that are located in the main rice ecological zones of China are selected for impact assessment. First, Crop Estimation through Resource and Environment Synthesis (CERES)-rice model is validated using farm experiment data in selected stations. The simulated results represent satisfactorily the trend of flowering duration and yields. The deviation of simulation within {+-} 10% of observed flowering duration and {+-} 15% of observed yield. Second, the errors of the outputs of RCM due to the difference of topography between station point and grid point is corrected. The corrected output of the RCM used for simulating rice flowering duration and yield is more reliable than the not corrected. Without CO2 direct effect on crop, the results from the assessment explore that B2 climate change scenario would have a negative impact on rice yield at most rice stations and have little impacts at Fuzhou and Kunming. To find the change of inter-annual rice yield, a preliminary assessment is made based on comparative cumulative probability at low and high yield and the coefficient variable of yield between the B2 scenario and baseline. Without the CO2 direct effect on rice yield, the result indicates that frequency for low yield would increase and it reverses for high yield, and the variance for rice yield would increase. It is concluded that high frequency at low yield and high variances of rice yield could pose a threat to rice yield at most selected stations in the main rice areas of China. With the CO2 direct effect on rice yield, rice yield increase in all selected stations.

Acceptance and Commitment Training: A Brief Intervention to Reduce Procrastination among College Students

Science.gov (United States)

Scent, Camille L.; Boes, Susan R.

2014-01-01

Academic procrastination is a multifaceted problem with cognitive, behavioral, and motivational correlates. Considered from an acceptance and commitment therapy (ACT) point of view, these correlates relate to experiential avoidance and cognitive fusion. This article describes a brief ACT intervention for reducing procrastination.

Understanding Consumer’s Acceptance of Technology-Based Innovations in Retailing

Directory of Open Access Journals (Sweden)

Eleonora Pantano

2012-12-01

Full Text Available The availability of a huge number of studies about the Technology Acceptance Model (TAM for predicting consumer’s acceptance and usage of innovations in points of sale motivates writing of the present. Review, with emphasis on the new variables integrated in the traditional model. This is concerned with a synthesis of the current progresses in the field, thus offering a unified view of consumers’ behaviour towards new technical solutions. Such  synthesis is achieved from an extensive literature analysis, including computer science, innovation, human-computer interaction, and technology management perspectives. For each case, both opportunities and issues are outlined in order to advance the current knowledge and highlight what practitioners and scholars should take into account for developing new and efficient corporate strategies.

Feasibility and acceptability of workers' health surveillance for fire fighters.

Science.gov (United States)

Plat, Marie-Christine J; Frings-Dresen, Monique Hw; Sluiter, Judith K

2011-09-01

The objective of this study was to test the feasibility and acceptability of a new workers' health surveillance (WHS) for fire fighters in a Dutch pilot-implementation project. In three fire departments, between November 2007 and February 2009, feasibility was tested with respect to i) worker intent to change health and behavior; ii) the quality of instructions for testing teams; iii) the planned procedure in the field; and iv) future WHS organisation. Acceptability involved i) satisfaction with WHS and ii) verification of the job-specificity of the content of two physical tests of WHS. Fire fighters were surveyed after completing WHS, three testing teams were interviewed, and the content of the two tests was studied by experts. nearly all of the 275 fire fighters intended to improve their health when recommended by the occupational physician. The testing teams found the instructions to be clear, and they were mostly positive about the organisation of WHS. Acceptability: the fire fighters rated WHS at eight points (out of a maximum of ten). The experts also reached a consensus about the optimal job-specific content of the future functional physical tests. Overall, it is feasible and acceptable to implement WHS in a definitive form in the Dutch fire-fighting sector.

Energy dependence of ion-induced sputtering yields from monoatomic solids at normal incidence

International Nuclear Information System (INIS)

Yamamura, Yasunori; Tawara, Hiro.

1995-03-01

The yields of the ion-induced sputtering from monoatomic solids at normal incidence for various ion-target combinations are presented graphically as a function of the incident ion energy. In order to fill the lack of the experimental data, the sputtering yields are also calculated by the Monte Carlo simulation code ACAT for some ion-target combinations. Each graph shows available experimental data points and the ACAT data, together with the sputtering yields calculated by the present empirical formula, whose parameters are determined by the best-fit to available data. (author)

The acceptance of gamma irradiated pre-cooked processed chicken meat products

International Nuclear Information System (INIS)

Seri Chempaka Mohd Yusof; Muhamad Lebai Juri; Foziah Ali; Salahbiah Abdul Majida; Mariani Deraman; Ros Anita Ahmad Ramli; Rohaizah Ahmad; Zainab Harun; Abdul Salam Babji

2009-01-01

A study was carried out to determine suitable dose, microbiological counts including pathogens and sensory evaluation of pre-cooked chicken meat products in assessing the acceptability of irradiated pre-cooked chicken meat products. Packed pre-cooked chicken sausages and burger samples (sealed individually in plastic-polyethylene pouches) were irradiated at the following doses: 2.5 kGy, 3.5 kGy and 5.5 kGy using 60 Co gamma irradiation at MINTec-Sinagama. Acceptability of the sausages was determined through sensory evaluation by 30 members of untrained panelists comprising staff of Malaysian Nuclear Agency. A 5-points hedonic rating scale was used. The attributes evaluated were taste, texture, chewiness, juiciness, aroma, colour, shape and overall acceptance. Samples irradiated with dose of 5.5 kGy were the most acceptable, followed by samples irradiated at 3.5 kGy and 10 kGy. Irradiation at doses up to 3.5 kGy render undetectable microorganisms/fungi and pathogens (faecal coliforms, Salmonella sp., Escherichia coli and Staphylococcus aureus) in pre-cooked chicken sausages, and doses up to 5.5 kGy for pre-cooked chicken burgers

Soybean yield modeling using bootstrap methods for small samples

Energy Technology Data Exchange (ETDEWEB)

Dalposso, G.A.; Uribe-Opazo, M.A.; Johann, J.A.

2016-11-01

One of the problems that occur when working with regression models is regarding the sample size; once the statistical methods used in inferential analyzes are asymptotic if the sample is small the analysis may be compromised because the estimates will be biased. An alternative is to use the bootstrap methodology, which in its non-parametric version does not need to guess or know the probability distribution that generated the original sample. In this work we used a set of soybean yield data and physical and chemical soil properties formed with fewer samples to determine a multiple linear regression model. Bootstrap methods were used for variable selection, identification of influential points and for determination of confidence intervals of the model parameters. The results showed that the bootstrap methods enabled us to select the physical and chemical soil properties, which were significant in the construction of the soybean yield regression model, construct the confidence intervals of the parameters and identify the points that had great influence on the estimated parameters. (Author)

In acceptance we trust? Conceptualising acceptance as a viable approach to NGO security management.

Science.gov (United States)

Fast, Larissa A; Freeman, C Faith; O'Neill, Michael; Rowley, Elizabeth

2013-04-01

This paper documents current understanding of acceptance as a security management approach and explores issues and challenges non-governmental organisations (NGOs) confront when implementing an acceptance approach to security management. It argues that the failure of organisations to systematise and clearly articulate acceptance as a distinct security management approach and a lack of organisational policies and procedures concerning acceptance hinder its efficacy as a security management approach. The paper identifies key and cross-cutting components of acceptance that are critical to its effective implementation in order to advance a comprehensive and systematic concept of acceptance. The key components of acceptance illustrate how organisational and staff functions affect positively or negatively an organisation's acceptance, and include: an organisation's principles and mission, communications, negotiation, programming, relationships and networks, stakeholder and context analysis, staffing, and image. The paper contends that acceptance is linked not only to good programming, but also to overall organisational management and structures. © 2013 The Author(s). Journal compilation © Overseas Development Institute, 2013.

Evaluating outcomes of computer-based classroom testing: Student acceptance and impact on learning and exam performance.

Science.gov (United States)

Zheng, Meixun; Bender, Daniel

2018-03-13

Computer-based testing (CBT) has made progress in health sciences education. In 2015, the authors led implementation of a CBT system (ExamSoft) at a dental school in the U.S. Guided by the Technology Acceptance Model (TAM), the purposes of this study were to (a) examine dental students' acceptance of ExamSoft; (b) understand factors impacting acceptance; and (c) evaluate the impact of ExamSoft on students' learning and exam performance. Survey and focus group data revealed that ExamSoft was well accepted by students as a testing tool and acknowledged by most for its potential to support learning. Regression analyses showed that perceived ease of use and perceived usefulness of ExamSoft significantly predicted student acceptance. Prior CBT experience and computer skills did not significantly predict acceptance of ExamSoft. Students reported that ExamSoft promoted learning in the first program year, primarily through timely and rich feedback on examination performance. t-Tests yielded mixed results on whether students performed better on computerized or paper examinations. The study contributes to the literature on CBT and the application of the TAM model in health sciences education. Findings also suggest ways in which health sciences institutions can implement CBT to maximize its potential as an assessment and learning tool.

Determination of yield and erosion damage functions using subjectively elicited data: application to smallholder tea in Sri Lanka

OpenAIRE

Ananda, Jayanath; Herath, Gamini; Chisholm, Anthony H.

2001-01-01

Tea has been Sri Lanka’s major export earner for several decades. However, soil erosion on tea‐producing land has had considerable on‐site and off‐site effects. This study quantifies soil erosion impacts for smallholder tea farms in Sri Lanka by estimating a yield damage function and an erosion damage function using a subjective elicitation technique. The Mitscherlich‐Spillman type of function was found to yield acceptable results. The study indicates that high rates of soil erosion require e...

Optimizing rice yields while minimizing yield-scaled global warming potential.

Science.gov (United States)

Pittelkow, Cameron M; Adviento-Borbe, Maria A; van Kessel, Chris; Hill, James E; Linquist, Bruce A

2014-05-01

To meet growing global food demand with limited land and reduced environmental impact, agricultural greenhouse gas (GHG) emissions are increasingly evaluated with respect to crop productivity, i.e., on a yield-scaled as opposed to area basis. Here, we compiled available field data on CH4 and N2 O emissions from rice production systems to test the hypothesis that in response to fertilizer nitrogen (N) addition, yield-scaled global warming potential (GWP) will be minimized at N rates that maximize yields. Within each study, yield N surplus was calculated to estimate deficit or excess N application rates with respect to the optimal N rate (defined as the N rate at which maximum yield was achieved). Relationships between yield N surplus and GHG emissions were assessed using linear and nonlinear mixed-effects models. Results indicate that yields increased in response to increasing N surplus when moving from deficit to optimal N rates. At N rates contributing to a yield N surplus, N2 O and yield-scaled N2 O emissions increased exponentially. In contrast, CH4 emissions were not impacted by N inputs. Accordingly, yield-scaled CH4 emissions decreased with N addition. Overall, yield-scaled GWP was minimized at optimal N rates, decreasing by 21% compared to treatments without N addition. These results are unique compared to aerobic cropping systems in which N2 O emissions are the primary contributor to GWP, meaning yield-scaled GWP may not necessarily decrease for aerobic crops when yields are optimized by N fertilizer addition. Balancing gains in agricultural productivity with climate change concerns, this work supports the concept that high rice yields can be achieved with minimal yield-scaled GWP through optimal N application rates. Moreover, additional improvements in N use efficiency may further reduce yield-scaled GWP, thereby strengthening the economic and environmental sustainability of rice systems. © 2013 John Wiley & Sons Ltd.

Generalized Trust, Need for Cognitive Closure, and the Perceived Acceptability of Personal Data Collection

Directory of Open Access Journals (Sweden)

David Chavanne

2018-04-01

Full Text Available This vignette-based study examines how generalized trust and the need for cognitive closure relate to the perceived acceptability of contemporary business methods of personal data collection. Subjects are exposed to four scenarios that describe a method of personal data collection, involving either brand-name companies or generic descriptors of companies. After each scenario, subjects rate how acceptable they find the practice of data collection, along with the frequency and quality of experiences that they have had with the company (for brand names or type of company (for generic descriptors. Judgments of perceived acceptability are analyzed, both across the portfolio of judgments and within each separate scenario. While analyses of each separate scenario point to the context-dependency of the perceived acceptability of data collection, several results stand out when analyzing the subjects’ portfolios of responses in the aggregate. Higher generalized trust is linked to a higher average acceptability rating, and the effect is stronger when companies are described with brand names rather than generic descriptors. Uniformly, however, no relationship is found between need for cognitive closure and perceived acceptability. Additionally, positive experiences are found to be a stronger predictor of perceived acceptability of data collection than frequency of use.

Biological reference points for fish stocks in a multispecies context

DEFF Research Database (Denmark)

Collie, J.S.; Gislason, Henrik

2001-01-01

Biological reference points (BRPs) are widely used to define safe levels of harvesting for marine fish populations. Most BRPs are either minimum acceptable biomass levels or maximum fishing mortality rates. The values of BRPs are determined from historical abundance data and the life...

A particle identification technique for large acceptance spectrometers

International Nuclear Information System (INIS)

Cappuzzello, F.; Cavallaro, M.; Cunsolo, A.; Foti, A.; Carbone, D.; Orrigo, S.E.A.; Rodrigues, M.R.D.

2010-01-01

A technique to identify the heavy ions produced in nuclear reactions is presented. It is based on the use of a hybrid detector, which measures the energy loss, the residual energy, the position and angle of the ions at the focal plane of a magnetic spectrometer. The key point is the use of a powerful algorithm for the reconstruction of the ion trajectory, which makes the technique reliable even with large acceptance optical devices. Experimental results with the MAGNEX spectrometer show a remarkable resolution of about 1/160 in the mass parameter.

Upland rice yield as affected by Brachiaria coverage management

Directory of Open Access Journals (Sweden)

Adriano S. Nascente

2015-01-01

Full Text Available An important point in no-tillage system is the time between cover crop glyphosate desiccation and rice sowing. This study aimed to verify the effect of Brachiaria ruziziensis management time before rice sowing on rice yield and its components. The experiment was conducted under greenhouse conditions and consisted of four types of B. ruziziensis management: with Brachiaria and with herbicide (WBWH, without Brachiaria shoots and with herbicide (NBWH, without Brachiaria shoots and without herbicide (NBNH, and with Brachiaria and without herbicide (WBNH, at four times: 30, 20, 10, and 0 days, preceding the rice sowing. The amount of B. ruziziensis dry matter increased as the management was done closer to the rice sowing date. The WBWH and WBNH managements (this one causes the lowest rice grain yield must be done 30 days before rice sowing; while NBWH management must be done ten or more days before rice sowing. On the other hand, NBNH management (this one favors the best rice grain yield can be done until rice sowing day. Despite some reduction in rice yield caused by the B. ruziziensis management, when it was done at the proper time the rice grain yield was similar to the control (without Brachiaria sowing and without herbicide application.

Influence of electric conductivity management on greenhouse tomato yield and fruit quality

OpenAIRE

Dorai , Martine; Papadopoulos , Athanasios; Gosselin , André

2001-01-01

International audience; The osmotic and ionic effects of the electrical conductivity (EC) of the nutrient solution and its interactions with climatic factors and cultural practices on tomato yield and fruit quality are reviewed. Adjusting the salinity of the nutrient solution allows growers to modify water availability to the crop and hence improve fruit quality. At some point, however, increases in salinity limit marketable yield. Under high ECs, fruit size is inversely related to EC while t...

Logotherapy Counseling to Improve Acceptance of Broken Home Child

Directory of Open Access Journals (Sweden)

Erwin Erlangga

2017-08-01

Full Text Available This study aims to increase the enrollment of children of a broken home that life has meaning. Subjects are 100 children in Demak whose families experiencing divorce. Research themes include three things: individual counseling, engineering logotherapy, reception, and a child of a broken home. Data obtained based on interviews, observation, and psychological scale showed that of the 100 children of a broken home has a low acceptance that individual counseling with logotherapy techniques were considered appropriate to increase the enrollment of children of a broken home. Factors - factors that affect the acceptance of a child of a broken home is self-blame, anger and did not have a purpose in life again. In addition the environment is also a significant effect on the enrollment of children of a broken home. Environmental labeling of families experiencing divorce as a family that failed so that children are increasingly stressed with the stamp of the community. Based on the field test results, the level of acceptance of the child of a broken home increases after the individual is given counseling services with logotherapy techniques. Indicated by changes in the level of acceptance of children of a broken home before being given treatment (initial evaluation and after (final evaluation of 130 points. The results of effectiveness test statistic t test calculations also showed 0,010 <0.05.It was concluded that counseling individuals with logotherapy effective technique to increase the enrollment of children of a broken home

ACCEPTANCE OF FUNCTIONAL FOOD AMONG CHILEAN CONSUMERS: APPLE LEATHER.

Science.gov (United States)

van Vliet, Maya; Adasme-Berrios, Cristian; Schnettler, Berta

2015-10-01

the aim of this study is to measure acceptance of a specific functional food: apple (fruit) leather, based on organoleptic characteristics and to identify consumer types and preferences for natural additives which increase the product's functionality and meet current nutritional needs. a sample of 800 consumers provided an evaluation of apple leather in terms of acceptance (liking). A sensorial panel was carried out using a 9-point hedonic scale. Cluster analysis was used to identify different acceptance-based consumer types. In addition, a conjoint analysis was carried out to determine preference for different additives. the cluster analysis resulted in four groups with significant differences in the average likings obtained from the sensory panel. Results indicate that the sweetness of the tested apple leather was evaluated best among all groups and, on average, color was rated as the worst attribute. However, overall likings differ significantly between groups. Results from the conjoint analysis indicate that, in general, consumers prefer natural additives included in the product which enhance functionality. although there is a "global acceptance" of the product, there are significant differences between groups. The results of the conjoint analysis indicate that, in general, consumers prefer the aggregation of natural additives which increase the product's functionality. Apple leather with natural additives, such as anticariogenics and antioxidants, can be considered a functional substitute of unhealthy snacks and/or sweets. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Assessment of Climate Change Impacts on Agricultural Water Demands and Crop Yields in California's Central Valley

Science.gov (United States)

Tansey, M. K.; Flores-Lopez, F.; Young, C. A.; Huntington, J. L.

2012-12-01

Long term planning for the management of California's water resources requires assessment of the effects of future climate changes on both water supply and demand. Considerable progress has been made on the evaluation of the effects of future climate changes on water supplies but less information is available with regard to water demands. Uncertainty in future climate projections increases the difficulty of assessing climate impacts and evaluating long range adaptation strategies. Compounding the uncertainty in the future climate projections is the fact that most readily available downscaled climate projections lack sufficient meteorological information to compute evapotranspiration (ET) by the widely accepted ASCE Penman-Monteith (PM) method. This study addresses potential changes in future Central Valley water demands and crop yields by examining the effects of climate change on soil evaporation, plant transpiration, growth and yield for major types of crops grown in the Central Valley of California. Five representative climate scenarios based on 112 bias corrected spatially downscaled CMIP 3 GCM climate simulations were developed using the hybrid delta ensemble method to span a wide range future climate uncertainty. Analysis of historical California Irrigation Management Information System meteorological data was combined with several meteorological estimation methods to compute future solar radiation, wind speed and dew point temperatures corresponding to the GCM projected temperatures and precipitation. Future atmospheric CO2 concentrations corresponding to the 5 representative climate projections were developed based on weighting IPCC SRES emissions scenarios. The Land, Atmosphere, and Water Simulator (LAWS) model was used to compute ET and yield changes in the early, middle and late 21st century for 24 representative agricultural crops grown in the Sacramento, San Joaquin and Tulare Lake basins. Study results indicate that changes in ET and yield vary

MEASUREMENT FOR ACCEPTANCE OF SUPPLY CHAIN SIMULATOR APPLICATION USING TECHNOLOGY ACCEPTANCE MODEL

Directory of Open Access Journals (Sweden)

Mulyati E.

2018-03-01

Full Text Available The aim of this research for was to measure the user acceptance of simulator application which was built as a tool for student in learning of supply chain, particularly in bullwhip effect problem. The measurements used for the acceptance of supply chain simulator application in this research was the Technology Acceptance Model from 162 samples which were analyzed with Confirmatory Factor Analysis and Structural Equation Modelling. The result of this research indicated that the user acceptance (shown by customer participation of supply chain simulator was directly influence by perceived usefulness of supply chain simulator application used (positive and significant; the user acceptance of supply chain simulator was indirectly influenced by perceived ease of use in using supply chain simulator application (positive but not significant; the user acceptance of supply chain simulator was indirectly influenced by perceived enjoyment when the supply chain simulator application was used. The research would give a better understanding about a bullwhip effect and better experience for students, which would not be obtained through conventional learning, when the tools were not used.

Comparison of Saliva Collection Methods in Children with High-Functioning Autism Spectrum Disorders: Acceptability and Recovery of Cortisol

Science.gov (United States)

Putnam, Susan K.; Lopata, Christopher; Fox, Jeffery D.; Thomeer, Marcus L.; Rodgers, Jonathan D.; Volker, Martin A.; Lee, Gloria K.; Neilans, Erik G.; Werth, Jilynn

2012-01-01

This study compared cortisol concentrations yielded using three saliva collection methods (passive drool, salivette, and sorbette) in both in vitro and in vivo conditions, as well as method acceptability for a sample of children (n = 39) with High Functioning Autism Spectrum Disorders. No cortisol concentration differences were observed between…

Dicentric yields induced in rabbit blood lymphocytes after exposure in vitro to X-rays

International Nuclear Information System (INIS)

Inoue, Yoshinori

1995-06-01

For the purpose of biological dosimetry, it is essential to establish the relationship between dicentric yields and absorbed doses. The present experiment was carried out to obtain data for rabbit lymphocytes as a reference for this relationship. As data at low dose level are scanty, rabbit lymphocytes were exposed to various doses, especially below 0.5 Gy, of 150 kVp X-rays and analysed at their first mitotic division for dicentric yields. The yields at high dose level were compared with data reported by other authors. The linear-quadratic equation, which is generally accepted, for the dose-response relationship was obtained by the iteratively reweighted least squares method. However, as the present experiment result showed that the dose-response relationship at low dose-levels was likely to be linear, a dose-response line was calculated by the linear regression analysis. As the result of the chi-square tests, it was found that the dicentric yield was better fitted to the linear model at low doses below 0.5 Gy than the linear quadratic model. (author)

Public acceptance of management methods under different human-wildlife conflict scenarios.

Science.gov (United States)

Liordos, Vasilios; Kontsiotis, Vasileios J; Georgari, Marina; Baltzi, Kerasia; Baltzi, Ioanna

2017-02-01

Wildlife management seeks to minimise public controversy for successful application of wildlife control methods. Human dimensions research in wildlife seeks a better understanding of public preferences for effective human-wildlife conflict resolution. In face to face interviews, 630 adults in Greece were asked to rate on a 5-point Likert-like scale their acceptance of 3 management methods, i.e., do nothing, non-lethal control, and lethal control, in the context of 5 human-wildlife conflict scenarios: 1) corvids damage crops; 2) starlings damage crops; 3) starlings foul urban structures; 4) coypus damage crops; and 5) coypus transfer disease. Univariate GLMs determined occupation, hunting membership and their interaction as the stronger predictors of public acceptance, generating 4 stakeholder groups: the general public, farmers, hunters, and farmers-hunters. Differences in acceptance and consensus among stakeholder groups were assessed using the Potential for Conflict Index 2 (PCI 2 ). All 4 stakeholder groups agreed that doing nothing was unacceptable and non-lethal control acceptable in all 5 scenarios, with generally high consensus within and between groups. The lethal control method was more controversial and became increasingly more acceptable as the severity of scenarios was increased and between non-native and native species. Lethal control was unacceptable for the general public in all scenarios. Farmers accepted lethal methods in the corvids and starlings scenarios, were neutral in the coypus damage crops scenario, whereas they accepted lethal control when coypus transfer disease. Hunters' opinion was neutral in the corvids, starlings and coypus damage crops and starlings foul urban structures scenarios, but they accepted lethal methods in the coypus transfer disease scenario. Farmers-hunters considered lethal control acceptable in all 5 scenarios. Implications from this study could be used for designing a socio-ecological approach which incorporates

Photophysics of the variable quantum yield of asymmetric bilirubin

International Nuclear Information System (INIS)

Troup, G.J.

1998-01-01

Full text: Bilirubin (BR), responsible for neonatal jaundice, is a molecule containing two pyrromethenone chromophores conjoined by a 'saturated' carbon CH 2 group. Because this disease is cured by phototherapy, BR has been extensively studied by laser means. When the chromophores in each half of the molecule are identical, we have symmetrical BR (SBR); when they are not, we have asymmetric BR (ASBR). The quantum yield of the photoproducts in simple organic solution from SBR is not wavelength-dependent, while that from ASBR is. Because of the proximity of the two chromophores, both the SBR and ASBR systems are subject to Davidoff (dynamic electric dipole) splitting of the chromophore excited states. A quantum mechanical calculation shows that when the two (ASBR) chromophore states are not degenerate, the higher Davidoff state is preferentially occupied by the chromophore with the 'original' higher energy, and the lower Davidoff state by the chromophore of 'original' lower energy. This is just what is required for the quantum yield to vary with wavelength. If the variation of the quantum yield of ASBR in the presence of human serum albumen is approximated by a square-wave (narrow line approximation), the deduced ratio of the short wavelength photoproduct yield with the long wavelength one is in agreement with accepted values for the 'original' energy difference of the chromophores, and the Davidoff splitting parameter. A previous explanation has involved variation of relaxation processes with wavelength, but only qualitatively. The quantum yields for SBRs bonded to HSA are not yet published, but show wavelength variation, possibly from asymmetric bonding. In 0.1% ammonia/methanol however, there is no such variation for the SBRs, while for ASBR, there is, and the photoproduct ratios for long and short wavelength are reciprocals of one another, as predicted by our theory

Effect of Integrated Nutrient Management on Yield and Yield ...

African Journals Online (AJOL)

Declining soil fertility is one of the major problems causing yield reduction of barley ... (VC) with inorganic NP on growth, yield and yield components of food barley. ... The experiments were laid out in a randomized complete block design with ...

EMPIRICALLY DERIVED INTEGRATED STELLAR YIELDS OF Fe-PEAK ELEMENTS

International Nuclear Information System (INIS)

Henry, R. B. C.; Cowan, John J.; Sobeck, Jennifer

2010-01-01

We present here the initial results of a new study of massive star yields of Fe-peak elements. We have compiled from the literature a database of carefully determined solar neighborhood stellar abundances of seven iron-peak elements, Ti, V, Cr, Mn, Fe, Co, and Ni, and then plotted [X/Fe] versus [Fe/H] to study the trends as functions of metallicity. Chemical evolution models were then employed to force a fit to the observed trends by adjusting the input massive star metallicity-sensitive yields of Kobayashi et al. Our results suggest that yields of Ti, V, and Co are generally larger as well as anticorrelated with metallicity, in contrast to the Kobayashi et al. predictions. We also find the yields of Cr and Mn to be generally smaller and directly correlated with metallicity compared to the theoretical results. Our results for Ni are consistent with theory, although our model suggests that all Ni yields should be scaled up slightly. The outcome of this exercise is the computation of a set of integrated yields, i.e., stellar yields weighted by a slightly flattened time-independent Salpeter initial mass function and integrated over stellar mass, for each of the above elements at several metallicity points spanned by the broad range of observations. These results are designed to be used as empirical constraints on future iron-peak yield predictions by stellar evolution modelers. Special attention is paid to the interesting behavior of [Cr/Co] with metallicity-these two elements have opposite slopes-as well as the indirect correlation of [Ti/Fe] with [Fe/H]. These particular trends, as well as those exhibited by the inferred integrated yields of all iron-peak elements with metallicity, are discussed in terms of both supernova nucleosynthesis and atomic physics.

Experimental signatures of a nonequilibrium phase transition governing the yielding of a soft glass.

Science.gov (United States)

Hima Nagamanasa, K; Gokhale, Shreyas; Sood, A K; Ganapathy, Rajesh

2014-06-01

We present direct experimental signatures of a nonequilibrium phase transition associated with the yield point of a prototypical soft solid-a binary colloidal glass. By simultaneously quantifying single-particle dynamics and bulk mechanical response, we identified the threshold for the onset of irreversibility with the yield strain. We extracted the relaxation time from the transient behavior of the loss modulus and found that it diverges in the vicinity of the yield strain. This critical slowing down is accompanied by a growing correlation length associated with the size of regions of high Debye-Waller factor, which are precursors to yield events in glasses. Our results affirm that the paradigm of nonequilibrium critical phenomena is instrumental in achieving a holistic understanding of yielding in soft solids.

40 CFR 279.32 - Used oil aggregation points owned by the generator.

Science.gov (United States)

2010-07-01

... (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF USED OIL Standards for Used Oil... aggregation point is any site or facility that accepts, aggregates, and/or stores used oil collected only from...

Oil-points - Designers means to evaluate sustainability of concepts

DEFF Research Database (Denmark)

Bey, Niki; Lenau, Torben Anker

1998-01-01

Designers have an essential influence on product design and are therefore one target group for environmental evaluation methods. This implies, that such evaluation methods have to meet designers requirements. Evaluation of sustainability of products is often done using formal Life Cycle Assessment....... This is investigated by means of three case studies where environmental impact is estimated using the EDIP method, the Eco-indicator 95 method, and the Oil Point method proposed by the authors. It is found that the results obtained using Oil Points are in acceptable conformity with the results obtained with more...

Yield of reversible colloidal gels during flow start-up: release from kinetic arrest.

Science.gov (United States)

Johnson, Lilian C; Landrum, Benjamin J; Zia, Roseanna N

2018-06-05

Yield of colloidal gels during start-up of shear flow is characterized by an overshoot in shear stress that accompanies changes in network structure. Prior studies of yield of reversible colloidal gels undergoing strong flow model the overshoot as the point at which network rupture permits fluidization. However, yield under weak flow, which is of interest in many biological and industrial fluids shows no such disintegration. The mechanics of reversible gels are influenced by bond strength and durability, where ongoing rupture and re-formation impart aging that deepens kinetic arrest [Zia et al., J. Rheol., 2014, 58, 1121], suggesting that yield be viewed as release from kinetic arrest. To explore this idea, we study reversible colloidal gels during start-up of shear flow via dynamic simulation, connecting rheological yield to detailed measurements of structure, bond dynamics, and potential energy. We find that pre-yield stress grows temporally with the changing roles of microscopic transport processes: early time behavior is set by Brownian diffusion; later, advective displacements permit relative particle motion that stretches bonds and stores energy. Stress accumulates in stretched, oriented bonds until yield, which is a tipping point to energy release, and is passed with a fully intact network, where the loss of very few bonds enables relaxation of many, easing glassy arrest. This is immediately followed by a reversal to growth in potential energy during bulk plastic deformation and condensation into larger particle domains, supporting the view that yield is an activated release from kinetic arrest. The continued condensation of dense domains and shrinkage of network surfaces, along with a decrease in the potential energy, permit the gel to evolve toward more complete phase separation, supporting our view that yield of weakly sheared gels is a 'non-equilibrium phase transition'. Our findings may be particularly useful for industrial or other coatings, where weak

Yield trends and yield gap analysis of major crops in the world

OpenAIRE

Hengsdijk, H.; Langeveld, J.W.A.

2009-01-01

This study aims to quantify the gap between current and potential yields of major crops in the world, and the production constraints that contribute to this yield gap. Using an expert-based evaluation of yield gaps and the literature, global and regional yields and yield trends of major crops are quantified, yield gaps evaluated by crop experts, current yield progress by breeding estimated, and different yield projections compared. Results show decreasing yield growth for wheat and rice, but ...

Characterization of non point source pollutants and their dispersion ...

African Journals Online (AJOL)

EJIRO

landing site in Uganda. N. Banadda. Agricultural and Bio-Systems Engineering Department, Makerere University, P. O. Box 7062, Kampala, Uganda. E-mail: banadda@agric.mak.ac.ug. Fax: +256-414-53.16.41. Accepted 5 January, 2011. The aim of this research is to characterize non point pollutants and their dispersion in ...

An Analysis of Technology Acceptance in Turkey using Fuzzy Logic and Structural Equation Modelling

Directory of Open Access Journals (Sweden)

Bilgin Şenel

2011-12-01

Full Text Available Technology is in a constant progress in the way of satisfying increasing human needs. This fact will hold true for the years to come. However, the level of adaptation to technological advancements varies greatly across countries. The pace of adjustment is directly proportional to the importance attached to and the funds allocated for this purpose. Despite the abundance of technological investments in Turkey in recent years, there are only a few studies analyzing the current level of individual interest in technology. This study therefore aims to determine the technology acceptance of Turkish people by using the Technology Acceptance Model (TAM developed by Davis (1989 and to demonstrate the reasons to accept or not accept technology departing from the links between dimensions. While accomplishing this aim, Structural Equation Model (SEM that is a highly strong multivariable analysis technique that makes possible the evaluation of latent structures like psychosocial needs, and the Fuzzy Logic Theorem that provides strong and significant instruments for the measurement of ambiguities and provides the opportunity to meaningfully represent ambiguous concepts expressed in the natural language were used. According to the findings of this study, it was determined that the perceived ease of use is more influential in people’s acceptance of technology than the perceived usefulness is. It was also found that technology acceptance does not differ significantly at the statistical significance level of 0.05 with respect to the participants’ demographic characteristics (age, gender, education level, hometown etc.. In addition, analyses performed to define the relationships between the dimensions of the TAM yielded results that highly supported the TAM. In other words, the dimensions affect technology acceptance to positive and significant degrees

EVALUATION OF GROWTH AND YIELD PERFORMANCE ON INOCULATED CHILI PEPPER HYBRIDS BY CUCUMBER MOSAIC VIRUS

Directory of Open Access Journals (Sweden)

Catur Herison

2014-02-01

Full Text Available Tolerance cultivar is a best control measure to reduce losses due to virus attack in the field. Study on growth and yield of new cultivars compared to the commercial ones is an important step in cultivar development whether they will be accepted by farmers or not. The objective of this research was to study growth and yield of new chili pepper hybrids developed for CMV tolerance in comparison to a commercial and similar fruit size one. Twelve new hybrids and one commercial hybrid cultivar 'Prada', as a control, were evaluated in a completely randomized design with 3 replications. In the greenhouse experiment, H23 and H20 showed better vegetative growth compared to other hybrids and control. Hybrid H17 showed the highest yield followed by H5, H4 and H6.

Equity yields

NARCIS (Netherlands)

Vrugt, E.; van Binsbergen, J.H.; Koijen, R.S.J.; Hueskes, W.

2013-01-01

We study a new data set of dividend futures with maturities up to ten years across three world regions: the US, Europe, and Japan. We use these asset prices to construct equity yields, analogous to bond yields. We decompose the equity yields to obtain a term structure of expected dividend growth

Foodservice yield and fabrication times for beef as influenced by purchasing options and merchandising styles.

Science.gov (United States)

Weatherly, B H; Griffin, D B; Johnson, H K; Walter, J P; De La Zerda, M J; Tipton, N C; Savell, J W

2001-12-01

Selected beef subprimals were obtained from fabrication lines of three foodservice purveyors to assist in the development of a software support program for the beef foodservice industry. Subprimals were fabricated into bone-in or boneless foodservice ready-to-cook portion-sized cuts and associated components by professional meat cutters. Each subprimal was cut to generate mean foodservice cutting yields and labor requirements, which were calculated from observed weights (kilograms) and processing times (seconds). Once fabrication was completed, data were analyzed to determine means and standard errors of percentage yields and processing times for each subprimal. Subprimals cut to only one end point were evaluated for mean foodservice yields and processing times, but no comparisons were made within subprimal. However, those traditionally cut into various end points were additionally compared by cutting style. Subprimals cut by a single cutting style included rib, roast-ready; ribeye roll, lip-on, bone-in; brisket, deckle-off, boneless; top (inside) round; and bottom sirloin butt, flap, boneless. Subprimals cut into multiple end points or styles included ribeye, lip-on; top sirloin, cap; tenderloin butt, defatted; shortloin, short-cut; strip loin, boneless; top sirloin butt, boneless; and tenderloin, full, side muscle on, defatted. Mean yields of portion cuts, and mean fabrication times required to manufacture these cuts differed (P < 0.05) by cutting specification of the final product. In general, as the target portion size of fabricated steaks decreased, the mean number of steaks derived from any given subprimal cut increased, causing total foodservice yield to decrease and total processing time to increase. Therefore, an inverse relationship tended to exist between processing times and foodservice yields. With a method of accurately evaluating various beef purchase options, such as traditional commodity subprimals, closely trimmed subprimals, and pre-cut portion

Modelling crop yield in Iberia under drought conditions

Science.gov (United States)

Ribeiro, Andreia; Páscoa, Patrícia; Russo, Ana; Gouveia, Célia

2017-04-01

The improved assessment of the cereal yield and crop loss under drought conditions are essential to meet the increasing economy demands. The growing frequency and severity of the extreme drought conditions in the Iberian Peninsula (IP) has been likely responsible for negative impacts on agriculture, namely on crop yield losses. Therefore, a continuous monitoring of vegetation activity and a reliable estimation of drought impacts is crucial to contribute for the agricultural drought management and development of suitable information tools. This works aims to assess the influence of drought conditions in agricultural yields over the IP, considering cereal yields from mainly rainfed agriculture for the provinces with higher productivity. The main target is to develop a strategy to model drought risk on agriculture for wheat yield at a province level. In order to achieve this goal a combined assessment was made using a drought indicator (Standardized Precipitation Evapotranspiration Index, SPEI) to evaluate drought conditions together with a widely used vegetation index (Normalized Difference Vegetation Index, NDVI) to monitor vegetation activity. A correlation analysis between detrended wheat yield and SPEI was performed in order to assess the vegetation response to each time scale of drought occurrence and also identify the moment of the vegetative cycle when the crop yields are more vulnerable to drought conditions. The time scales and months of SPEI, together with the months of NDVI, better related with wheat yield were chosen to perform a multivariate regression analysis to simulate crop yield. Model results are satisfactory and highlighted the usefulness of such analysis in the framework of developing a drought risk model for crop yields. In terms of an operational point of view, the results aim to contribute to an improved understanding of crop yield management under dry conditions, particularly adding substantial information on the advantages of combining

Modeling of Landslides with the Material Point Method

DEFF Research Database (Denmark)

Andersen, Søren Mikkel; Andersen, Lars

2008-01-01

A numerical model for studying the dynamic evolution of landslides is presented. The numerical model is based on the Generalized Interpolation Material Point Method. A simplified slope with a house placed on top is analysed. An elasto-plastic material model based on the Mohr-Coulomb yield criterion...

Modelling of Landslides with the Material-point Method

DEFF Research Database (Denmark)

Andersen, Søren; Andersen, Lars

2009-01-01

A numerical model for studying the dynamic evolution of landslides is presented. The numerical model is based on the Generalized Interpolation Material Point Method. A simplified slope with a house placed on top is analysed. An elasto-plastic material model based on the Mohr-Coulomb yield criterion...

Yield and properties of ethanol biofuel produced from different whole cassava flours.

Science.gov (United States)

Ademiluyi, F T; Mepba, H D

2013-01-01

The yield and properties of ethanol biofuel produced from five different whole cassava flours were investigated. Ethanol was produced from five different whole cassava flours. The effect of quantity of yeast on ethanol yield, effect of whole cassava flour to acid and mineralized media ratio on the yield of ethanol produced, and the physical properties of ethanol produced from different cassava were investigated. Physical properties such as distillation range, density, viscosity, and flash point of ethanol produced differ slightly for different cultivars, while the yield of ethanol and electrical conductivity of ethanol from the different cassava cultivars varies significantly. The variation in mineral composition of the different whole cassava flours could also lead to variation in the electrical conductivity of ethanol produced from the different cassava cultivars. The differences in ethanol yield are attributed to differences in starch content, protein content, and dry matter of cassava cultivars. High yield of ethanol from whole cassava flour is best produced from cultivars with high starch content, low protein content, and low fiber.

Chemical intervention in plant sugar signalling increases yield and resilience

Science.gov (United States)

Griffiths, Cara A.; Sagar, Ram; Geng, Yiqun; Primavesi, Lucia F.; Patel, Mitul K.; Passarelli, Melissa K.; Gilmore, Ian S.; Steven, Rory T.; Bunch, Josephine; Paul, Matthew J.; Davis, Benjamin G.

2016-12-01

The pressing global issue of food insecurity due to population growth, diminishing land and variable climate can only be addressed in agriculture by improving both maximum crop yield potential and resilience. Genetic modification is one potential solution, but has yet to achieve worldwide acceptance, particularly for crops such as wheat. Trehalose-6-phosphate (T6P), a central sugar signal in plants, regulates sucrose use and allocation, underpinning crop growth and development. Here we show that application of a chemical intervention strategy directly modulates T6P levels in planta. Plant-permeable analogues of T6P were designed and constructed based on a ‘signalling-precursor’ concept for permeability, ready uptake and sunlight-triggered release of T6P in planta. We show that chemical intervention in a potent sugar signal increases grain yield, whereas application to vegetative tissue improves recovery and resurrection from drought. This technology offers a means to combine increases in yield with crop stress resilience. Given the generality of the T6P pathway in plants and other small-molecule signals in biology, these studies suggest that suitable synthetic exogenous small-molecule signal precursors can be used to directly enhance plant performance and perhaps other organism function.

Sugarcane trash management assessed by the interaction of yield with soil properties

Directory of Open Access Journals (Sweden)

Flávio Carlos Dalchiavon

2013-12-01

Full Text Available Currently, sugarcane plays an important global role, particularly with a view to alternative energy sources. Thus, in a sugarcane field of the mill Vale do Paraná S/A Álcool e Açúcar, Rubineia, São Paulo State, managed under two green cane harvest systems (cane trash left on and cane trash removed from the soil, Pearson and spatial correlations between the sugarcane yield (variety RB855035 in the third cut and soil physical and chemical properties were studied to identify the property best correlated with stalk yield and the best harvest method. For this purpose, two geostatistical grids (121 sampling points on 1.30 ha were installed on a eutrophic Red Argisol (homogeneous slope of 0.065 m m-1, in 2011, to determine the properties: stalk yield and sugarcane plant population, and soil resistance to penetration, gravimetric moisture, bulk density, and carbon stock, in the layers 0-0.20 and 0.20-0.40 m. The data were analyzed by descriptive, linear correlation and geostatistical analysis. In both treatments, the property stand density was best correlated with sugarcane yield (r = 0.725 in the trash mulching treatment - TM and r = 0.769 in the trash removal treatment - TR. However, in relation to the soil properties, bulk density (0-0.20 m was best correlated (r = 0.305 in TM, r = 0.211 in TR. Similarly, from the spatial point of view, stand density was the property that best explained the sugarcane yield. However, in the TM treatment the density (0.20-0.40 m was the only soil property spatially correlated with stalk yield. The carbon stock in the soil of the TM was 11.5 % higher than in the TR treatment. Results of the TM treatment were best, also with regard to soil management and conservation.

Cacao Crop Management Zones Determination Based on Soil Properties and Crop Yield

Directory of Open Access Journals (Sweden)

Perla Silva Matos de Carvalho

Full Text Available ABSTRACT: The use of management zones has ensured yield success for numerous agricultural crops. In spite of this potential, studies applying precision agricultural techniques to cacao plantations are scarce or almost nonexistent. The aim of the present study was to delineate management zones for cacao crop, create maps combining soil physical properties and cacao tree yield, and identify what combinations best fit within the soil chemical properties. The study was conducted in 2014 on a cacao plantation in a Nitossolo Háplico Eutrófico (Rhodic Paleudult in Bahia, Brazil. Soil samples were collected in a regular sampling grid with 120 sampling points in the 0.00-0.20 m soil layer, and pH(H2O, P, K+, Ca2+, Mg2+, Na+, H+Al, Fe, Zn, Cu, Mn, SB, V, TOC, effective CEC, CEC at pH 7.0, coarse sand, fine sand, clay, and silt were determined. Yield was measured in all the 120 points every month and stratified into annual, harvest, and early-harvest cacao yields. Data were subjected to geostatistical analysis, followed by ordinary kriging interpolation. The management zones were defined through a Fuzzy K-Means algorithm for combinations between soil physical properties and cacao tree yield. Concordance analysis was carried out between the delineated zones and soil chemical properties using Kappa coefficients. The zones that best classified the soil chemical properties were defined from the early-harvest cacao yield map associated with the clay or sand fractions. Silt content proved to be an inadequate variable for defining management zones for cacao production. The delineated management zones described the spatial variability of the soil chemical properties, and are therefore important for site-specific management in the cacao crop.

Chinese Nurses' Acceptance of PDA: A Cross-Sectional Survey Using a Technology Acceptance Model.

Science.gov (United States)

Wang, Yanling; Xiao, Qian; Sun, Liu; Wu, Ying

2016-01-01

This study explores Chinese nurses' acceptance of PDA, using a questionnaire based on the framework of Technology Acceptance Model (TAM). 357 nurses were involved in the study. The results reveal the scores of the nurses' acceptance of PDA were means 3.18~3.36 in four dimensions. The younger of nurses, the higher nurses' title, the longer previous usage time, the more experienced using PDA, and the more acceptance of PDA. Therefore, the hospital administrators may change strategies to enhance nurses' acceptance of PDA, and promote the wide application of PDA.

Acceptance of human papillomavirus vaccination among Californian parents of daughters: a representative statewide analysis.

Science.gov (United States)

Constantine, Norman A; Jerman, Petra

2007-02-01

To examine likelihood of parental acceptance of human papillomavirus (HPV) vaccination for young adolescent girls, together with reasons for acceptance and nonacceptance. The ultimate goal of this research is to inform policy decisions and educational planning in this area. A random-digit-dial telephone survey of parents in California households was conducted, yielding 522 parents with an eligible daughter. Cross tabulations and odds ratios were employed to analyze likelihood of vaccination acceptability. Reasons provided for acceptance or nonacceptance were analyzed qualitatively. Overall, 75% of the sample reported that they would be likely to vaccinate a daughter before age 13 years. Hispanic parents were more likely to accept vaccination than were non-Hispanic parents, whereas African-American and Asian-American parents were less likely. Other subgroups less likely to accept vaccination were identified. Five clusters of reasons by nonaccepting parents emerged: pragmatic concerns about effects on sexual behavior, specific HPV vaccine concerns, moral concerns about sexual behavior, general vaccine concerns, and denial of need. A sixth group of interest comprised those who would vaccinate before age 16 years, but not age 13. Consistent with previous studies on this topic, a large majority of California parents endorsed HPV vaccination for daughters by the recommended age. Although important subgroup disparities were found, majorities of all subgroups supported vaccination. This information, together with the identified clusters of cognitive decision factors for nonacceptance, has implications for policy decisions and educational planning in this area. Suggestions for further research on subgroup disparities and on cognitive factors involved in parents' decisions arise from these findings.

Readiness of primary school teachers to accept disabled children

Directory of Open Access Journals (Sweden)

Đević Rajka

2009-01-01

Full Text Available The paper presents the results of the research with the basic goal to study the readiness of primary school teachers to accept disabled students. Research participants were 205 teachers from primary schools at the territory of Serbia. The goal was accomplished through: (a studying attitudes towards joint education of disabled students and their peers; (b studying teachers' experiences in working with disabled students; and (c studying teachers' readiness to accept disabled students, depending on their involvement/non-involvement in projects of inclusive education. Teachers express supportive attitudes towards joint schooling, but more than one half of them think that a selective approach is necessary in that process, according to the kind and degree of developmental disability. They support joint schooling from the humanistic point of view, but express concerns about the academic achievement of classes that include disabled students. The majority of teachers had experience in working with disabled students and based on that provided interesting suggestions for improving joint schooling. Higher readiness for accepting disabled students was demonstrated by teachers whose schools were involved in the projects of inclusive education. That implies the need for involving schools in similar projects and enabling teachers' immediate contact with students with developmental disabilities.

Fission yield calculation using toy model based on Monte Carlo simulation

International Nuclear Information System (INIS)

Jubaidah; Kurniadi, Rizal

2015-01-01

Toy model is a new approximation in predicting fission yield distribution. Toy model assumes nucleus as an elastic toy consist of marbles. The number of marbles represents the number of nucleons, A. This toy nucleus is able to imitate the real nucleus properties. In this research, the toy nucleons are only influenced by central force. A heavy toy nucleus induced by a toy nucleon will be split into two fragments. These two fission fragments are called fission yield. In this research, energy entanglement is neglected. Fission process in toy model is illustrated by two Gaussian curves intersecting each other. There are five Gaussian parameters used in this research. They are scission point of the two curves (R c ), mean of left curve (μ L ) and mean of right curve (μ R ), deviation of left curve (σ L ) and deviation of right curve (σ R ). The fission yields distribution is analyses based on Monte Carlo simulation. The result shows that variation in σ or µ can significanly move the average frequency of asymmetry fission yields. This also varies the range of fission yields distribution probability. In addition, variation in iteration coefficient only change the frequency of fission yields. Monte Carlo simulation for fission yield calculation using toy model successfully indicates the same tendency with experiment results, where average of light fission yield is in the range of 90yield is in about 135

Fission yield calculation using toy model based on Monte Carlo simulation

Energy Technology Data Exchange (ETDEWEB)

Jubaidah, E-mail: jubaidah@student.itb.ac.id [Nuclear Physics and Biophysics Division, Department of Physics, Bandung Institute of Technology. Jl. Ganesa No. 10 Bandung – West Java, Indonesia 40132 (Indonesia); Physics Department, Faculty of Mathematics and Natural Science – State University of Medan. Jl. Willem Iskandar Pasar V Medan Estate – North Sumatera, Indonesia 20221 (Indonesia); Kurniadi, Rizal, E-mail: rijalk@fi.itb.ac.id [Nuclear Physics and Biophysics Division, Department of Physics, Bandung Institute of Technology. Jl. Ganesa No. 10 Bandung – West Java, Indonesia 40132 (Indonesia)

2015-09-30

Toy model is a new approximation in predicting fission yield distribution. Toy model assumes nucleus as an elastic toy consist of marbles. The number of marbles represents the number of nucleons, A. This toy nucleus is able to imitate the real nucleus properties. In this research, the toy nucleons are only influenced by central force. A heavy toy nucleus induced by a toy nucleon will be split into two fragments. These two fission fragments are called fission yield. In this research, energy entanglement is neglected. Fission process in toy model is illustrated by two Gaussian curves intersecting each other. There are five Gaussian parameters used in this research. They are scission point of the two curves (R{sub c}), mean of left curve (μ{sub L}) and mean of right curve (μ{sub R}), deviation of left curve (σ{sub L}) and deviation of right curve (σ{sub R}). The fission yields distribution is analyses based on Monte Carlo simulation. The result shows that variation in σ or µ can significanly move the average frequency of asymmetry fission yields. This also varies the range of fission yields distribution probability. In addition, variation in iteration coefficient only change the frequency of fission yields. Monte Carlo simulation for fission yield calculation using toy model successfully indicates the same tendency with experiment results, where average of light fission yield is in the range of 90yield is in about 135

Simulating maize yield and bomass with spatial variability of soil field capacity

Science.gov (United States)

Ma, Liwang; Ahuja, Lajpat; Trout, Thomas; Nolan, Bernard T.; Malone, Robert W.

2015-01-01

Spatial variability in field soil properties is a challenge for system modelers who use single representative values, such as means, for model inputs, rather than their distributions. In this study, the root zone water quality model (RZWQM2) was first calibrated for 4 yr of maize (Zea mays L.) data at six irrigation levels in northern Colorado and then used to study spatial variability of soil field capacity (FC) estimated in 96 plots on maize yield and biomass. The best results were obtained when the crop parameters were fitted along with FCs, with a root mean squared error (RMSE) of 354 kg ha–1 for yield and 1202 kg ha–1 for biomass. When running the model using each of the 96 sets of field-estimated FC values, instead of calibrating FCs, the average simulated yield and biomass from the 96 runs were close to measured values with a RMSE of 376 kg ha–1 for yield and 1504 kg ha–1 for biomass. When an average of the 96 FC values for each soil layer was used, simulated yield and biomass were also acceptable with a RMSE of 438 kg ha–1 for yield and 1627 kg ha–1 for biomass. Therefore, when there are large numbers of FC measurements, an average value might be sufficient for model inputs. However, when the ranges of FC measurements were known for each soil layer, a sampled distribution of FCs using the Latin hypercube sampling (LHS) might be used for model inputs.

Acceptance of Nordic snack bars in children aged 8-11 years.

Science.gov (United States)

Holmer, Anna; Hausner, Helene; Reinbach, Helene C; Bredie, Wender L P; Wendin, Karin

2012-01-01

A health promoting diet is suggested to be tailored to regional circumstances to preserve the cultural diversity in eating habits, as well as contribute to more environmentally friendly eating. It may influence consumer acceptance, however, if the components of the diet differs considerably from their habitual food. This study aimed to investigate whether snack bars composed of Nordic ingredients were accepted by 8-11 year-old Danish (n=134) and Swedish (n=109) children. A seven-point hedonic scale was used to measure the children's acceptance of five snack bars that varied in their composition of whole grains, berries and nuts. A preference rank ordering of the five bars was also performed. The results showed that samples that were rated highest in liking and were most preferred in both countries were a kamut/pumpkin bar and an oat/cranberry bar. The sample with the lowest rating that was also least preferred was a pumpernickel/sea buckthorn bar. Flavour was the most important determinant of overall liking followed by texture, odour and appearance. Children's acceptances and preferences were highly influenced by the sensory characteristics of the bars, mainly flavour. In agreement with earlier studies, the novel food ingredients seemed to influence children's preferences. The Nordic snack bars may have a potential to be a snack option for Danish and Swedish school children, but repeated exposures to the products are recommended to increase children's acceptance.

Promoting the acceptance of nuclear technology

International Nuclear Information System (INIS)

Rueckl, E.

1998-01-01

Restoring the public acceptance of nuclear technology requires optimized public relations work and an enhanced interaction among the nuclear industry and schools and universities. Thinking in contexts needs to be promoted, also in order to improve knowledge of mass flows. Specific terms often mean different things to experts and to the public. This can be corrected by careful use of language and precision in public relations work. The young generation is more openminded towards technology now than it was in the seventies and eighties. This is a point of departure in winning young people also for nuclear technology. For this to happen, science education in schools needs to be improved and the appropriate courses need to be introduced. (orig.) [de

The influence of tinnitus acceptance on the quality of life and psychological distress in patients with chronic tinnitus

Directory of Open Access Journals (Sweden)

David Riedl

2015-01-01

Full Text Available Recent findings show the importance of acceptance in the treatment of chronic tinnitus. So far, very limited research investigating the different levels of tinnitus acceptance has been conducted. The aim of this study was to investigate the quality of life (QoL and psychological distress in patients with chronic tinnitus who reported different levels of tinnitus acceptance. The sample consisted of outpatients taking part in a tinnitus coping group (n = 97. Correlations between tinnitus acceptance, psychological distress, and QoL were calculated. Receiver operating characteristic (ROC curves were used to calculate a cutoff score for the German "Tinnitus Acceptance Questionnaire" (CTAQ-G and to evaluate the screening abilities of the CTAQ-G. Independent sample t-tests were conducted to compare QoL and psychological distress in patients with low tinnitus acceptance and high tinnitus acceptance. A cutoff point for CTAQ-G of 62.5 was defined, differentiating between patients with "low-to-mild tinnitus acceptance" and "moderate-to-high tinnitus acceptance." Patients with higher levels of tinnitus acceptance reported a significantly higher QoL and lower psychological distress. Tinnitus acceptance plays an important role for patients with chronic tinnitus. Increased levels of acceptance are related to better QoL and less psychological distress.

Self-Similar Spin Images for Point Cloud Matching

Science.gov (United States)

Pulido, Daniel

based on the concept of self-similarity to aid in the scale and feature matching steps. An open problem in fusion is how best to extract features from two point clouds and then perform feature-based matching. The proposed approach for this matching step is the use of local self-similarity as an invariant measure to match features. In particular, the proposed approach is to combine the concept of local self-similarity with a well-known feature descriptor, Spin Images, and thereby define "Self-Similar Spin Images". This approach is then extended to the case of matching two points clouds in very different coordinate systems (e.g., a geo-referenced Lidar point cloud and stereo-image derived point cloud without geo-referencing). The use of Self-Similar Spin Images is again applied to address this problem by introducing a "Self-Similar Keyscale" that matches the spatial scales of two point clouds. Another open problem is how best to detect changes in content between two point clouds. A method is proposed to find changes between two point clouds by analyzing the order statistics of the nearest neighbors between the two clouds, and thereby define the "Nearest Neighbor Order Statistic" method. Note that the well-known Hausdorff distance is a special case as being just the maximum order statistic. Therefore, by studying the entire histogram of these nearest neighbors it is expected to yield a more robust method to detect points that are present in one cloud but not the other. This approach is applied at multiple resolutions. Therefore, changes detected at the coarsest level will yield large missing targets and at finer levels will yield smaller targets.

Influence of wholesale lamb marketing options and merchandising styles on retail yield and fabrication time.

Science.gov (United States)

Lorenzen, C L; Martin, A M; Griffin, D B; Dockerty, T R; Walter, J P; Johnson, H K; Savell, J W

1997-01-01

Lamb carcasses (n = 94) from five packing plants, selected to vary in weight class and fat thickness, were used to determine retail yield and labor requirements of wholesale lamb fabrication. Carcasses were allotted randomly according to weight class to be fabricated as whole carcasses (n = 20), three-piece boxes (n = 22), or subprimals (n = 52). Processing times (seconds) were recorded and wholesale and retail weights (kilograms) were obtained to calculate retail yield. Subprimals were fabricated into bone-in retail cuts or boneless or semi-boneless retail cuts. Retail yield for subprimal lamb legs decreased from 85.3 +/- .6% for bone-in to 68.0 +/- .7% for a completely boneless retail product. Correspondingly, processing times increased from 126.1 +/- 5.4 s to 542.0 +/- 19.2 s for bone-in and boneless legs, respectively. For all subprimals, retail yield percentage tended to decrease and total processing time increase as cuts were fabricated to boneless or semi-boneless end points compared with a bone-in end point. Percentage retail yield did not differ (P > .05) among whole carcass, three-piece box, and subprimal marketing methods. Total processing time was shorter for subprimals (P < .05) than for the other two marketing methods.

Identifying critical nitrogen application rate for maize yield and nitrate leaching in a Haplic Luvisol soil using the DNDC model.

Science.gov (United States)

Zhang, Yitao; Wang, Hongyuan; Liu, Shen; Lei, Qiuliang; Liu, Jian; He, Jianqiang; Zhai, Limei; Ren, Tianzhi; Liu, Hongbin

2015-05-01

Identification of critical nitrogen (N) application rate can provide management supports for ensuring grain yield and reducing amount of nitrate leaching to ground water. A five-year (2008-2012) field lysimeter (1 m × 2 m × 1.2 m) experiment with three N treatments (0, 180 and 240 kg Nha(-1)) was conducted to quantify maize yields and amount of nitrate leaching from a Haplic Luvisol soil in the North China Plain. The experimental data were used to calibrate and validate the process-based model of Denitrification-Decomposition (DNDC). After this, the model was used to simulate maize yield production and amount of nitrate leaching under a series of N application rates and to identify critical N application rate based on acceptable yield and amount of nitrate leaching for this cropping system. The results of model calibration and validation indicated that the model could correctly simulate maize yield and amount of nitrate leaching, with satisfactory values of RMSE-observation standard deviation ratio, model efficiency and determination coefficient. The model simulations confirmed the measurements that N application increased maize yield compared with the control, but the high N rate (240 kg Nha(-1)) did not produce more yield than the low one (120 kg Nha(-1)), and that the amount of nitrate leaching increased with increasing N application rate. The simulation results suggested that the optimal N application rate was in a range between 150 and 240 kg ha(-1), which would keep the amount of nitrate leaching below 18.4 kg NO₃(-)-Nha(-1) and meanwhile maintain acceptable maize yield above 9410 kg ha(-1). Furthermore, 180 kg Nha(-1) produced the highest yields (9837 kg ha(-1)) and comparatively lower amount of nitrate leaching (10.0 kg NO₃(-)-Nha(-1)). This study will provide a valuable reference for determining optimal N application rate (or range) in other crop systems and regions in China. Copyright © 2015 Elsevier B.V. All rights reserved.

Acceptability of Canistel (Lacuma Nervosa A.DC Fruit Flour in Making Cookies

Directory of Open Access Journals (Sweden)

Delia A. Paragados

2014-02-01

Full Text Available This experimental research determined the acceptability in terms of appearance, aroma, texture, flavor and general acceptability of canistel (Lacuma nervosa A. DC fruit flour in different proportions in making cookies. This study was conducted in December 2011 at West Visayas State University – Calinog Campus, Calinog, Iloilo. Five treatments were used in the study – four of them utilized canistel fruit flour at various proportions and one treatment was used as the control group which utilized all purpose flour. The respondents of the study were the 15 faculty and staff, 15 Food Technology and BSHRM students of WVSU - Calinog Campus, and 15 housewives at Brgy. Simsiman, Calinog, Iloilo who were selected through purposive sampling. The respondents evaluated the finished products using a modified sensory evaluation score sheet based on Five Point Hedonic Scale. There were five treatments replicated three times. The statistical tools used were the means, standard deviation, One – Way Analysis of Variance, and the LSD. The .01 alpha level was used as the criterion for acceptance or rejection of the null hypotheses. The study revealed that cookies prepared using all treatments were “liked very much” in terms of appearance, aroma, texture, flavor and general acceptability. While cookies with 100% all - purpose flour were liked moderately by the evaluators. These results led to the conclusion that there is a significant difference that existed in the level of acceptability of canistel fruit flour in making cookies in terms of aroma, texture, flavor and general acceptability, therefore the null hypothesis is rejected. However, no significant difference in the level of acceptability of canistel fruit flour in making cookies in terms of appearance, therefore the null hypothesis is accepted.

On the use of risk acceptance criteria in the offshore oil and gas industry

International Nuclear Information System (INIS)

Aven, Terje; Vinnem, Jan Erik

2005-01-01

Risk acceptance criteria, as upper limits of acceptable risks, have been used for offshore activities on the Norwegian Continental Shelf for more than 20 years. The common thinking has been that risk analyses and assessments cannot be conducted in a meaningful way without the use of such criteria. The ALARP principle also applies, but the risk acceptance criteria have played a more active role in the assessment processes than seen for example in the UK. Recently there has, however, been a discussion about the suitability of risk acceptance criteria to assess and control risks. The purpose of this paper is to contribute to this discussion by presenting and discussing a risk analysis regime that is not based on the use of risk acceptance criteria at all. We believe that we can do better if cost-effectiveness (in a wide sense) is the ruling thinking rather than adoption of pre-defined risk acceptance limits. This means a closer resemblance with the ALARP principle as adopted in the UK and other countries, but is not a direct application of this practice. Also the building blocks of the common way of applying the ALARP principle are reviewed. The Norwegian offshore oil and gas industry is the starting point, but the discussion is to large extent general

Students’ acceptance of peer review in Computer Science course

Directory of Open Access Journals (Sweden)

Zuzana Kubincová

2016-04-01

Full Text Available Peer review technique used in educational context could be beneficial for students from several points of view. Besides of developing students’ writing skills, critical thinking, practising articulation of own knowledge to the others and giving them feedback, it can encourage collaborative learning and boost the students’ interest in the course. In our web design course we successfully introduced peer review activities more than 2 years ago. In this paper we discuss the students’ acceptance of peer review applied on evaluation of other students’ projects.

10 CFR 50.46a - Acceptance criteria for reactor coolant system venting systems.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Acceptance criteria for reactor coolant system venting systems. 50.46a Section 50.46a Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND... function of these systems. High point vents are not required for the tubes in U-tube steam generators...

Waste-acceptance criteria and risk-based thinking for radioactive-waste classification

International Nuclear Information System (INIS)

Lowenthal, M.D.

1998-01-01

The US system of radioactive-waste classification and its development provide a reference point for the discussion of risk-based thinking in waste classification. The official US system is described and waste-acceptance criteria for disposal sites are introduced because they constitute a form of de facto waste classification. Risk-based classification is explored and it is found that a truly risk-based system is context-dependent: risk depends not only on the waste-management activity but, for some activities such as disposal, it depends on the specific physical context. Some of the elements of the official US system incorporate risk-based thinking, but like many proposed alternative schemes, the physical context of disposal is ignored. The waste-acceptance criteria for disposal sites do account for this context dependence and could be used as a risk-based classification scheme for disposal. While different classes would be necessary for different management activities, the waste-acceptance criteria would obviate the need for the current system and could better match wastes to disposal environments saving money or improving safety or both

Age and Acceptance of Euthanasia.

Science.gov (United States)

Ward, Russell A.

1980-01-01

Study explores relationship between age (and sex and race) and acceptance of euthanasia. Women and non-Whites were less accepting because of religiosity. Among older people less acceptance was attributable to their lesser education and greater religiosity. Results suggest that quality of life in old age affects acceptability of euthanasia. (Author)

Older Adults' Perceptions of and Preferences for a Fall Risk Assessment System: Exploring Stages of Acceptance Model.

Science.gov (United States)

Galambos, Colleen; Rantz, Marilyn; Back, Jessie; Jun, Jung Sim; Skubic, Marjorie; Miller, Steven J

2017-07-01

Aging in place is a preferred and cost-effective living option for older adults. Research indicates that technology can assist with this goal. Information on consumer preferences will help in technology development to assist older adults to age in place. The study aim was to explore the perceptions and preferences of older adults and their family members about a fall risk assessment system. Using a qualitative approach, this study examined the perceptions, attitudes, and preferences of 13 older adults and five family members about their experience living with the fall risk assessment system during five points in time. Themes emerged in relation to preferences and expectations about the technology and how it fits into daily routines. We were able to capture changes that occurred over time for older adult participants. Results indicated that there was acceptance of the technology as participants adapted to it. Two themes were present across the five points in time-safety and usefulness. Five stages of acceptance emerged from the data from preinstallation to 2 years postinstallation. Identified themes, stages of acceptance, and design and development considerations are discussed.

Increasing radiographer productivity by an incentive point system.

Science.gov (United States)

Williams, B; Chacko, P T

1983-01-01

Because of a very low technologist productivity in their Radiology Department, the authors describe a Productive Point System they developed and implemented to solve this personnel problem. After establishing the average time required to perform all exams, point credits (one point for every ten minutes utilized) were assigned to each exam performed, thereby determining an index of production. A Productive Index of 80% was considered realistic and was the equivalent of 192 points for a 40-hour work week. From 1975 to 1978 personal productivity increased from 79% to 113%. This resulted in an average yearly fiscal savings of over $20,000.00 for this three-year period. There was also a significant improvement in exam efficiency and quality, job attitude, personnel morale, and public relations. This program was highly successful because technologist acceptance and cooperation was complete, and this occurred mainly because the system supports the normal occupational goals and expectations of technologists.

Assessing the Effect of Organic Compounds, Biofertilizers and Chemical Fertilizers on Morphological Properties,yield and Yield Components of Forage Sorghum (Sorghum bicolor

Directory of Open Access Journals (Sweden)

A.H Saeidnejad

2012-12-01

Full Text Available Recently, using the source of organic fertilizers and biofertilizers in sustainable crop production is growing. In order to evaluate the effect of organic compounds, biofertilizers and chemical fertilizer on morphological properties, yield and yield components of forage Sorghum (sorghum bicolor a field experiment was conducted in the Research Farm, College of Agriculture, Ferdowsi University of Mashhad in 2008.The treatments were seed inoculation with the combination of Azotobacter chroococcum and Azospirillum brasilense, Compost (15 t/ha, Vermicompost (10 t/ha, seed inoculation with Azotobacter and Azospirillum and compost (10t/ha, seed inoculation with Azotobacter chroococcum and Azospirillum brasilense and Vermicompost (7t/ha, seed inoculation with Pseudomonas flurescence, seed inoculation with Pseudomonas flurescence and Azotobacter chroococcum and Azospirillum brasilense combination, seed inoculation with Pseudomonas flurescence and compost (15t/ha, chemical fertilizer (80 kg/h urea fertilizer and 50 kg/h super phosphate fertilizer and control. Harvesting was performed in 2 cuts in flowering stage. Plant height, number of tiller per plant and SPAD reading was significantly affected by the treatments. Stem diameter was not affected by any treatments. There was a significant difference among all treatments in terms of fresh and dry forage yield. There were no significant differences among all treatments in terms of stem and leaf dry matter. In general, result of this experiment indicated that organic amendments and biofertilizers could be acceptable alternatives for chemical fertilizers.

How do consumer attitudes influence acceptance of a novel wild blueberry-soy product?

Science.gov (United States)

Teh, T; Dougherty, M P; Camire, M E

2007-09-01

Acceptance of healthful foods by consumers is not yet well understood. In this study, 3 formulations of frozen dessert bars were prepared containing both soy and wild blueberries. Soy content was controlled to provide an amount of soy protein that qualified for the health claim for soy and reduced risks for cardiovascular disease. Consumers were asked to complete the Health and Taste Attitude Scales (HTAS) and then evaluate the acceptability of the 3 frozen bar types using a 9-point hedonic scale. One week after the 1st session, the participants returned. Approximately half were given information to read regarding the health benefits of soy protein, the other participants were given no information. The samples were then presented a 2nd time and labeled with their soy protein content. Changes in hedonic scores between sessions were compared and correlated with HTAS ratings. Nutrition information generally did not affect acceptability scores.

Exploring visitor acceptability for hardening trails to sustain visitation and minimize impacts

Science.gov (United States)

Cahill, K.L.; Marion, J.L.; Lawson, S.R.

2008-01-01

Protected natural area managers are challenged to provide high quality recreation opportunities and ensure the protection of resources from impacts associated with visitation. Development of visitor use facilities and application of site hardening practices are commonly applied tools for achieving these competing management objectives. This study applies stated choice analysis to examine visitor opinions on acceptability when they are asked to make tradeoffs among competing social, resource and management attributes in backcountry and frontcountry settings of Acadia National Park. This study demonstrates that asking visitors about recreation setting attributes uni-dimensionally, a common approach, can yield less informative responses. Analyses that considered direct tradeoffs revealed more divergent opinions on acceptability for setting attributes than a unidimensional approach. Findings revealed that visitors to an accessible and popular attraction feature supported trail development options to protect resource conditions with unrestricted visitor access. In contrast, visitors to a remote undeveloped island expressed stronger support for no or limited trail development and access restrictions to protect resource conditions.

Scattering analysis of point processes and random measures

International Nuclear Information System (INIS)

Hanisch, K.H.

1984-01-01

In the present paper scattering analysis of point processes and random measures is studied. Known formulae which connect the scattering intensity with the pair distribution function of the studied structures are proved in a rigorous manner with tools of the theory of point processes and random measures. For some special fibre processes the scattering intensity is computed. For a class of random measures, namely for 'grain-germ-models', a new formula is proved which yields the pair distribution function of the 'grain-germ-model' in terms of the pair distribution function of the underlying point process (the 'germs') and of the mean structure factor and the mean squared structure factor of the particles (the 'grains'). (author)

Evaluation of Yield, Yield Components and Growth Indices of Safflower (Carthamus tinctorius L. in Conventional and Organic Farming Systems

Directory of Open Access Journals (Sweden)

Mahdieh Hajghani

2017-09-01

with conventional farming, inorganic fertilization was considered as a conventional agriculture (CA for each replication. Growth indices were assessed based on the growing degree days (GDD. After harvested, the head number per plant, seed number per head, 1000 seed weight and seed yield were evaluated. Also, two separate statistical analyses were used for comparison organic treatments with each other and conventional agriculture with organic treatments. Results and discussion The results showed that the maximum LAI, TDW and CGR have been determined at 9 t ha-1 vermicompost and 3000 ppm humic acid in CA. Likewise, the results indicated that vermicompost leads to a significant increase in seed yield, flower yield and yield components except 1000 seed weight. Head number per plant, seed number per head and seed yield were affected by humic acid treatments and increased significantly from 1000 to 3000 ppm. However, 1000 seed weight decreased with the increasing concentration of humic acid. It should be mentioned that, 9 t ha-1 vermicompost and 3000 ppm humic acid produced the highest head number per plant (24.75, seed number per head (56.71 and seed yield (4268.17 kg ha-1 in two years that in comparison with CA were increased 79.22%, 30.37% and 89.49%, respectively. Conclusion The results of this study indicated that acceptable yield was obtained with increasing HA concentration at lower levels of vermicompost compared to the higher amount of vermicompost without HA that is economically beneficial. For example, application of 6 t ha-1 vermicompost + 3000 ppm HA had higher seed yield (3027.08 kg ha-1 than 9 t ha-1 vermicompost without foliar application of HA (2722.5 kg ha-1, although there was no significant difference between them.

FUZZY ACCEPTANCE SAMPLING AND CHARACTERISTIC CURVES

Directory of Open Access Journals (Sweden)

Ebru Turano?lu

2012-02-01

Full Text Available Acceptance sampling is primarily used for the inspection of incoming or outgoing lots. Acceptance sampling refers to the application of specific sampling plans to a designated lot or sequence of lots. The parameters of acceptance sampling plans are sample sizes and acceptance numbers. In some cases, it may not be possible to define acceptance sampling parameters as crisp values. These parameters can be expressed by linguistic variables. The fuzzy set theory can be successfully used to cope with the vagueness in these linguistic expressions for acceptance sampling. In this paper, the main distributions of acceptance sampling plans are handled with fuzzy parameters and their acceptance probability functions are derived. Then the characteristic curves of acceptance sampling are examined under fuzziness. Illustrative examples are given.

Estimates of the relative specific yield of aquifers from geo-electrical ...

African Journals Online (AJOL)

This paper discusses a method of estimating aquifer specific yield based on surface resistivity sounding measurements supplemented with data on water conductivity. The practical aim of the method is to suggest a parallel low cost method of estimating aquifer properties. The starting point is the Archie's law, which relates ...

The Temporal and Spatial Evolution of Water Yield in Dali County

Directory of Open Access Journals (Sweden)

Jing Yu

2015-05-01

Full Text Available Water yield is of great importance to the balance between supply and demand of water resources. The provision of freshwater for Dali is estimated and mapped in 1988, 1995, 2000, 2005 and 2008, using the Integrated Valuation of Environmental Services and Tradeoffs (InVEST modeling toolset. The stability of water yield’s spatial variation is analyzed by a sorting method. The factors are explored which lead to the change in the relative water yield capacity. The yields at five points in time are compared, and the result of which shows a sharp fluctuation. The water yield curve is of a similar waveform as precipitation. An obvious and relatively stable spatial variation appears for water yield. The highest water yield areas are mainly located in the area where the elevation is high and both the elevation and the slope changes are large, and the main land uses are Shrub Land and High Coverage Grassland. The lowest areas are mainly in the eastern part of Erhai or the surrounding area. Precipitation, construction land expansion and the implementation of policy on land use are the three main factors which contribute to the change of the relative water yield capacity during 1988–2008 in Dali. In the study area, the water yield appears highly sensitive to the change in precipitation. The elasticity coefficient is calculated to illustrate the sensitivity of the water yield to the precipitation. When the elasticity index is larger, the risk of natural disaster will be higher.

Analisis Sikap Pengguna Paytren Menggunakan Technology Acceptance Model

Directory of Open Access Journals (Sweden)

Moh Siri

2017-04-01

Full Text Available Abstrak Semakin pesatnya aplikasi berbasis android mendorong masyarakat beralih dan menggunakan. Melakukan transaksi dan pembayaran ke loket-loket Paymen Point Online Bank (BPOB yang dirasa kurang membantu masyarakat dalam kegiatan transkasi. Oleh karenanya hadir sebuah layanan terknologi dibidang micropayment dengan perangkat lunak bernama PayTren yang dapat digunakan untuk pembayaran transaksi dalam jumlah kecil  (micropayment berbasis android yang merupakan salah satu alternatif tepat dan bermanfaat untuk sarana mempermudah pengguna dalam melakukan transaksi atau pembayaran serta mampu menggeser jenis pembayaran pada loket-loket pembayaran pada umumnya. Tujuan dalam penelitian ini adalah untuk menganalisis sikap pengguna aplikasi PayTren berbasis android dengan menggunakan metode Technology Acceptance Model (TAM, serta pengujian menggunakan analisis regresi. Manfaat penelitian ini adalah sebagai referensi untuk penelitian selanjutnya dengan menggunakan metode TAM dan ditambahkan variabel yang lain. Hasil dari penelitian ini persepsi kegunaan (perceived usefullness dan persepi kemudahan (perceived easy of use memiliki pengaruh yang dikategorikan kuat dan lemah terhadap (attitude toward using sikap pengguna. Kata Kunci: Aplikasi, Android, PayTren, Technology Acceptance Model.                                                                                                                             Abstract The more rapid the android-based applications are pushing the community move on and use. Transaction and payment to the counter-the counter of Paymen Point Online Bank (BPOB where less help the community in dealings. Therefore present a terknologi service in the field of micropayment with software called PayTren that can be used for payment transactions in small amounts (micropayment android-based which is one of the alternatives is right and beneficial for the means of

Yield, yield components and dry matter digestibility of alfalfa experimental populations

Directory of Open Access Journals (Sweden)

Katić Slobodan

2010-01-01

Full Text Available Alfalfa is the most important forage crop grown in the temperate regions. It is cultivated for production of vegetative aerial mass used fresh or as hay, and recently as haylage and silage. In many centres worldwide, efforts are made to breed and create new alfalfa cultivars with both higher yields and of higher nutritional value. The aim of this paper was to determine yield and digestibility of 12 experimental populations of alfalfa, and to compare their results to the yields of well-known domestic alfalfa commercial cultivars. The results show significant differences in yield of green forage and dry matter among alfalfa populations, as well as in yield components, height, proportion of leaves in yield and growth rate (tab. 1, 2 and 3. Differences between in vitro digestible dry matter (% and yields of in vitro digestible dry matter (t ha-1 were also significant (tab. 5 and 6. Yield and quality of experimental populations were at the same level or higher than of control cultivars. Synthetic SINUSA exceeded the control cutivars (NS Mediana ZMS V and Banat VS in yield and quality of dry matter. .

Slope Controls Grain Yield and Climatic Yield in Mountainous Yunnan province, China

Science.gov (United States)

Duan, X.; Rong, L.; Gu, Z.; Feng, D.

2017-12-01

Mountainous regions are increasingly vulnerable to food insecurity because of limited arable land, growing population pressure, and climate change. Development of sustainable mountain agriculture will require an increased understanding of the effects of environmental factors on grain and climatic yields. The objective of this study was to explore the relationships between actual grain yield, climatic yield, and environmental factors in a mountainous region in China. We collected data on the average grain yield per unit area in 119 counties in Yunnan province from 1985 to 2012, and chose 17 environmental factors for the same period. Our results showed that actual grain yield ranged from 1.43 to 6.92 t·ha-1, and the climatic yield ranged from -0.15 to -0.01 t·ha-1. Lower climatic yield but higher grain yield was generally found in central areas and at lower slopes and elevations in the western and southwestern counties of Yunnan province. Higher climatic yield but lower grain yield were found in northwestern parts of Yunnan province on steep slopes. Annual precipation and temperature had a weak influence on the climatic yield. Slope explained 44.62 and 26.29% of the variation in grain yield and climatic yield. The effects of topography on grain and climatic yields were greater than climatic factors. Slope was the most important environmental variable for the variability in climatic and grain yields in the mountainous Yunnan province due to the highly heterogeneous topographic conditions. Conversion of slopes to terraces in areas with higher climatic yields is an effective way to maintain grain production in response to climate variability. Additionally, soil amendments and soil and water conservation measures should be considered to maintain soil fertility and aid in sustainable development in central areas, and in counties at lower slopes and elevations in western and southwestern Yunnan province.

Relation of watershed setting and stream nutrient yields at selected sites in central and eastern North Carolina, 1997-2008

Science.gov (United States)

Harden, Stephen L.; Cuffney, Thomas F.; Terziotti, Silvia; Kolb, Katharine R.

2013-01-01

Data collected between 1997 and 2008 at 48 stream sites were used to characterize relations between watershed settings and stream nutrient yields throughout central and eastern North Carolina. The focus of the investigation was to identify environmental variables in watersheds that influence nutrient export for supporting the development and prioritization of management strategies for restoring nutrient-impaired streams. Nutrient concentration data and streamflow data compiled for the 1997 to 2008 study period were used to compute stream yields of nitrate, total nitrogen (N), and total phosphorus (P) for each study site. Compiled environmental data (including variables for land cover, hydrologic soil groups, base-flow index, streams, wastewater treatment facilities, and concentrated animal feeding operations) were used to characterize the watershed settings for the study sites. Data for the environmental variables were analyzed in combination with the stream nutrient yields to explore relations based on watershed characteristics and to evaluate whether particular variables were useful indicators of watersheds having relatively higher or lower potential for exporting nutrients. Data evaluations included an examination of median annual nutrient yields based on a watershed land-use classification scheme developed as part of the study. An initial examination of the data indicated that the highest median annual nutrient yields occurred at both agricultural and urban sites, especially for urban sites having large percentages of point-source flow contributions to the streams. The results of statistical testing identified significant differences in annual nutrient yields when sites were analyzed on the basis of watershed land-use category. When statistical differences in median annual yields were noted, the results for nitrate, total N, and total P were similar in that highly urbanized watersheds (greater than 30 percent developed land use) and (or) watersheds with greater

Yield trends and yield gap analysis of major crops in the world

NARCIS (Netherlands)

Hengsdijk, H.; Langeveld, J.W.A.

2009-01-01

This study aims to quantify the gap between current and potential yields of major crops in the world, and the production constraints that contribute to this yield gap. Using an expert-based evaluation of yield gaps and the literature, global and regional yields and yield trends of major crops are

Impact of sow and litter characteristics on colostrum yield, time for onset of lactation, and milk yield of sows

DEFF Research Database (Denmark)

Vadmand, Camilla Nielsen; Larsen, Uffe Krogh; Hansen, Christian Fink

2015-01-01

The aim of the present study was to estimate the concurrent impact of sow and litter characteristics on sow productivity. Sow productivity was defined as colostrum yield (CY), onset of lactation (the time point when milk secretion increased steeply, approximately 31 h postpartum), transition milk...... litter equlization, none of the observed independent variables were related with time for onset of lactation. In conclusion, when maximizing sow productivity in the future, it may be rewarding to pay attention to sow productivity in the colostrum period and around time for onset of lactation, and special...

Quantum Yields in Mixed-Conifer Forests and Ponderosa Pine Plantations

Science.gov (United States)

Wei, L.; Marshall, J. D.; Zhang, J.

2008-12-01

Most process-based physiological models require canopy quantum yield of photosynthesis as a starting point to simulate carbon sequestration and subsequently gross primary production (GPP). The quantum yield is a measure of photosynthetic efficiency expressed in moles of CO2 assimilated per mole of photons absorbed; the process is influenced by environmental factors. In the summer 2008, we measured quantum yields on both sun and shade leaves for four conifer species at five sites within Mica Creek Experimental Watershed (MCEW) in northern Idaho and one conifer species at three sites in northern California. The MCEW forest is typical of mixed conifer stands dominated by grand fir (Abies grandis (Douglas ex D. Don) Lindl.). In northern California, the three sites with contrasting site qualities are ponderosa pine (Pinus ponderosa C. Lawson var. ponderosa) plantations that were experimentally treated with vegetation control, fertilization, and a combination of both. We found that quantum yields in MCEW ranged from ~0.045 to ~0.075 mol CO2 per mol incident photon. However, there were no significant differences between canopy positions, or among sites or tree species. In northern California, the mean value of quantum yield of three sites was 0.051 mol CO2/mol incident photon. No significant difference in quantum yield was found between canopy positions, or among treatments or sites. The results suggest that these conifer species maintain relatively consistent quantum yield in both MCEW and northern California. This consistency simplifies the use of a process-based model to accurately predict forest productivity in these areas.

Evaluation of weather-based rice yield models in India

Science.gov (United States)

Sudharsan, D.; Adinarayana, J.; Reddy, D. Raji; Sreenivas, G.; Ninomiya, S.; Hirafuji, M.; Kiura, T.; Tanaka, K.; Desai, U. B.; Merchant, S. N.

2013-01-01

The objective of this study was to compare two different rice simulation models—standalone (Decision Support System for Agrotechnology Transfer [DSSAT]) and web based (SImulation Model for RIce-Weather relations [SIMRIW])—with agrometeorological data and agronomic parameters for estimation of rice crop production in southern semi-arid tropics of India. Studies were carried out on the BPT5204 rice variety to evaluate two crop simulation models. Long-term experiments were conducted in a research farm of Acharya N G Ranga Agricultural University (ANGRAU), Hyderabad, India. Initially, the results were obtained using 4 years (1994-1997) of data with weather parameters from a local weather station to evaluate DSSAT simulated results with observed values. Linear regression models used for the purpose showed a close relationship between DSSAT and observed yield. Subsequently, yield comparisons were also carried out with SIMRIW and DSSAT, and validated with actual observed values. Realizing the correlation coefficient values of SIMRIW simulation values in acceptable limits, further rice experiments in monsoon (Kharif) and post-monsoon (Rabi) agricultural seasons (2009, 2010 and 2011) were carried out with a location-specific distributed sensor network system. These proximal systems help to simulate dry weight, leaf area index and potential yield by the Java based SIMRIW on a daily/weekly/monthly/seasonal basis. These dynamic parameters are useful to the farming community for necessary decision making in a ubiquitous manner. However, SIMRIW requires fine tuning for better results/decision making.

Spatial-temporal variability of leaf chlorophyll and its relationship with cocoa yield

Directory of Open Access Journals (Sweden)

Caique C. Medauar

Full Text Available ABSTRACT The objective of this study was to evaluate the spatial-temporal variability of leaf chlorophyll index and its relationship with cocoa yield. The experiment was carried out in an experimental area of cocoa production located in Ilhéus, Bahia State, Brazil. Leaf chlorophyll content was measured in September, October, January, February, March and April in the 2014/2015 season, at each sampling point of a regular grid by using a portable chlorophyll meter. Under the same conditions, yield was evaluated and the data were submitted to descriptive statistics and a linear correlation study. Geostatistical analysis was used to determine and quantify the spatial and temporal variability of leaf chlorophyll index and yield. Leaf chlorophyll index varied over the period evaluated, but the months of February, March and April showed no spatial dependence in the study area, indicating absence of temporal stability. Cocoa monthly yield, except in January, presented high spatial variability. Under the conditions of this study, it was not possible to establish a relationship between leaf chlorophyll index and cocoa yield.

Sensory acceptance of mixed nectar of papaya, passion fruit and acerola

Directory of Open Access Journals (Sweden)

Matsuura Fernando César Akira Urbano

2004-01-01

Full Text Available Nectars are beverages formulated with the juice or pulp of one or more fruits, plus water and sugar in concentrations resulting in a "ready-to-drink" product. Recently, the market for such products has greatly expanded. Fruit mixtures present a series of advantages, such as the combination of different aromas and flavors and the sum of their nutritional components. The objective of this work was to develop a nectar based on papaya pulp and passion fruit juice, enriched with the vitamin C present in acerola pulp, optimizing the formulation using sensory consumer tests and a response surface statistical methodology. Eleven formulations were prepared using different concentrations of papaya pulp and passion fruit juice and sucrose, and maintaining the concentration of acerola pulp constant. The sensory tests were carried out with 22 non-trained panelists using a structured 9-point hedonic scale to evaluate overall acceptance. The acceptance means were submitted to regression analysis, by first calculating a polynomial quadratic equation. A predictive model was adjusted considering only those parameters where P < 0.05, and a response surface was generated. The overall acceptance of nectars of different formulations varied from 5 ("neither liked nor disliked" to more than 7 ("liked moderately", showing that some products can be considered adequate to consumers, like the nectar produced with 37.5% papaya pulp, 7.5% passion fruit juice, and 5.0% acerola pulp, added of 15% sucrose. A quadratic predictive overall acceptance model, with a regression coefficient of 0.97 was obtained. The sensory acceptance of nectars was positively affected by increases in the concentrations of papaya pulp and of sucrose. Thus, some products presented good sensory acceptance suggesting commercial potential.

Evaluation of the H-point standard additions method (HPSAM) and the generalized H-point standard additions method (GHPSAM) for the UV-analysis of two-component mixtures.

Science.gov (United States)

Hund, E; Massart, D L; Smeyers-Verbeke, J

1999-10-01

The H-point standard additions method (HPSAM) and two versions of the generalized H-point standard additions method (GHPSAM) are evaluated for the UV-analysis of two-component mixtures. Synthetic mixtures of anhydrous caffeine and phenazone as well as of atovaquone and proguanil hydrochloride were used. Furthermore, the method was applied to pharmaceutical formulations that contain these compounds as active drug substances. This paper shows both the difficulties that are related to the methods and the conditions by which acceptable results can be obtained.

The effect of acceptance training on psychological and physical health outcomes in elders with chronic conditions.

Science.gov (United States)

McDonald, Patricia E; Zauszniewski, Jaclene A; Bekhet, Abir K; DeHelian, Laura; Morris, Diana L

2011-12-01

This pilot trial investigated the short and long-term effects of Acceptance Training (ACT) intervention on acceptance, perceived health, functional status, anxiety, and depression in elders with chronic conditions living in retirement communities (RCs). The ACT intervention combined Rational Emotive Behavior Therapy with music, relaxation, and guided imagery during six weekly 2-hour sessions. Face-to-face interviews were conducted with 16 African-American and 46 White elders across four data collection points in six randomly selected RCs using well-established measures of perceived health, functional status, anxiety, and depression, and a measure of acceptance of chronic conditions adapted from a previous measure of acceptance of diabetes. While changes were found in perceived health, functional status, anxiety, and depression, the most significant changes occurred in the elders' acceptance of chronic conditions immediately after the intervention (t = -2.62, p < .02), and these changes persisted for 6 and 12 weeks (t's = -2.74, -3.32, p's < .01), respectively. Although a 40% attrition rate reduced the sample size from 62 (N = 62) to 37 (N = 37), the significant increases in acceptance over time provide initial evidence for the fidelity of the ACT intervention.

Simplified probabilistic approach to determine safety factors in deterministic flaw acceptance criteria

International Nuclear Information System (INIS)

Barthelet, B.; Ardillon, E.

1997-01-01

The flaw acceptance rules in nuclear components rely on deterministic criteria supposed to ensure the safe operating of plants. The interest of having a reliable method of evaluating the safety margins and the integrity of components led Electricite de France to launch a study to link safety factors with requested reliability. A simplified analytical probabilistic approach is developed to analyse the failure risk in Fracture Mechanics. Assuming lognormal distributions of the main random variables, it is possible considering a simple Linear Elastic Fracture Mechanics model, to determine the failure probability as a function of mean values and logarithmic standard deviations. The 'design' failure point can be analytically calculated. Partial safety factors on the main variables (stress, crack size, material toughness) are obtained in relation with reliability target values. The approach is generalized to elastic plastic Fracture Mechanics (piping) by fitting J as a power law function of stress, crack size and yield strength. The simplified approach is validated by detailed probabilistic computations with PROBAN computer program. Assuming reasonable coefficients of variations (logarithmic standard deviations), the method helps to calibrate safety factors for different components taking into account reliability target values in normal, emergency and faulted conditions. Statistical data for the mechanical properties of the main basic materials complement the study. The work involves laboratory results and manufacture data. The results of this study are discussed within a working group of the French in service inspection code RSE-M. (authors)

Production, characterization and acceptability of pineapple liqueurs prepared with different alcoholic bases

Directory of Open Access Journals (Sweden)

Érica Resende Oliveira

2015-04-01

Full Text Available Evaluation of physico-chemical parameters and the acceptability of liquors pineapple (Ananas comosus L. Merri, produced with different alcoholic bases: rum, flavored with pineapple peel and rum doubly distilled grain alcohol, were performed in this study. We conducted analyzes of alcoholic strength, density, pH, soluble solids, total fixed and volatile acidity, dry, and sensory analysis through the affective test of acceptability with 100 judges using 9-point hedonic scale to evaluate the attributes color, flavor , odor and overall impression, and purchase intent test. The average alcohol content found for all treatments was 25% v / v, a value that lies within the limits of the Brazilian law. The values of dry matter, fixed acidity, density and L * is not distinguished between treatments. The color parameters L *, a *, b *, chroma and H °, and the results of the analysis of the total acidity, soluble solid showed up only statistically different for liquor-based grain alcohol. The average pH differed for rum-based liqueur. All liquors showed good acceptability, averaging above 6 and 49% of the panelists claimed that the product would probably buy pineapple liqueur made with different alcoholic bases. The liquor made of only rum was the most accepted as the global average of items analyzed.

User acceptability--a critical success factor for picture archiving and communication system implementation.

Science.gov (United States)

Crivianu-Gaita, D; Babyn, P; Gilday, D; O'Brien, B; Charkot, E

2000-05-01

The Department of Diagnostic Imaging at the Hospital for Sick Children (HSC), Toronto, implemented a picture archiving and communication system (PACS) during the last year. This report describes our experience from the point of view of user acceptability. Based on objective data, the following key success factors were identified: user involvement in PACS planning, training, technical support, and rollout of pilot projects. Although technical factors are critical and must be addressed, the main conclusion of our study is that other nontechnical factors need to be recognized and resolved. Recognition of the importance of these factors to user acceptance and clear communication and consultation will help reduce negative user attitudes and increase the chance of a successful PACS implementation.

On yield gaps and yield gains in intercropping

NARCIS (Netherlands)

Gou, Fang; Yin, Wen; Hong, Yu; Werf, van der Wopke; Chai, Qiang; Heerink, Nico; Ittersum, van Martin K.

2017-01-01

Wheat-maize relay intercropping has been widely used by farmers in northwest China, and based on field experiments agronomists report it has a higher productivity than sole crops. However, the yields from farmers’ fields have not been investigated yet. Yield gap analysis provides a framework to

Refinement and evaluation of the Massachusetts firm-yield estimator model version 2.0

Science.gov (United States)

Levin, Sara B.; Archfield, Stacey A.; Massey, Andrew J.

2011-01-01

to assess the sensitivity of firm-yield estimates to errors in daily-streamflow input data. Results of the Monte Carlo simulations indicate that underestimation in the lowest stream inflows can cause firm yields to be underestimated by an average of 1 to 10 percent. Errors in the stage-storage relation can arise when the point density of bathymetric survey measurements is too low. Existing bathymetric surfaces were resampled using hypothetical transects of varying patterns and point densities in order to quantify the uncertainty in stage-storage relations. Reservoir-volume calculations and resulting firm yields were accurate to within 5 percent when point densities were greater than 20 points per acre of reservoir surface. Methods for incorporating summer water-demand-reduction scenarios into the firm-yield model were developed as well as the ability to relax the no-fail reliability criterion. Although the original firm-yield model allowed monthly reservoir releases to be specified, there have been no previous studies examining the feasibility of controlled releases for downstream flows from Massachusetts reservoirs. Two controlled-release scenarios were tested—with and without a summer water-demand-reduction scenario—for a scenario with a no-fail criterion and a scenario that allows for a 1-percent failure rate over the entire simulation period. Based on these scenarios, about one-third of the reservoir systems were able to support the flow-release scenarios at their 2000–2004 usage rates. Reservoirs with higher storage ratios (reservoir storage capacity to mean annual streamflow) and lower demand ratios (mean annual water demand to annual firm yield) were capable of higher downstream release rates. For the purposes of this research, all reservoir systems were assumed to have structures which enable controlled releases, although this assumption may not be true for many of the reservoirs studied.

Derivation of Waste Acceptance Criteria for Low and Intermediate Level Waste in Surface Disposal Facility

International Nuclear Information System (INIS)

Gagner, L.; Voinis, S.

2000-01-01

In France, low- and intermediate-level radioactive wastes are disposed in a near-surface facility, at Centre de l'Aube disposal facility. This facility, which was commissioned in 1992, has a disposal capacity of one million cubic meters, and will be operated up to about 2050. It took over the job from Centre de la Manche, which was commissioned in 1969 and shut down in 1994, after having received about 520,000 cubic meters of wastes. The Centre de l'Aube disposal facility is designed to receive a many types of waste produced by nuclear power plants, reprocessing, decommissioning, as well as by the industry, hospitals and armed forces. The limitation of radioactive transfer to man and the limitation of personnel exposure in all situations considered plausible require limiting the total activity of the waste disposed in the facility as well as the activity of each package. The paper presents how ANDRA has derived the activity-related acceptance criteria, based on the safety analysis. In the French methodology, activity is considered as end-point for deriving the concentration limits per package, whereas it is the starting point for deriving the total activity limits. For the concentration limits (called here LMA) the approach consists of five steps: the determination of radionuclides important for safety with regards to operational and long-term safety, the use of relevant safety scenarios as a tool to derive quantitative limits, the setting of dose constraint per situation associated with scenarios, the setting of contribution factor per radionuclide, and the calculation of concentration activity limits. An exhaustive survey has been performed and has shown that the totality of waste packages which should be delivered by waste generators are acceptable in terms of activity limits in the Centre de l'Aube. Examples of concentration activity limits derived from this methodology are presented. Furthermore those limits have been accepted by the French regulatory body and

Acceptance of Nordic snack bars in children aged 8–11 years

Directory of Open Access Journals (Sweden)

Anna Holmer

2012-04-01

Full Text Available Background: A health promoting diet is suggested to be tailored to regional circumstances to preserve the cultural diversity in eating habits, as well as contribute to more environmentally friendly eating. It may influence consumer acceptance, however, if the components of the diet differs considerably from their habitual food. Objective: This study aimed to investigate whether snack bars composed of Nordic ingredients were accepted by 8–11 year-old Danish (n=134 and Swedish (n=109 children.Design: A seven-point hedonic scale was used to measure the children's acceptance of five snack bars that varied in their composition of whole grains, berries and nuts. A preference rank ordering of the five bars was also performed. Results: The results showed that samples that were rated highest in liking and were most preferred in both countries were a kamut/pumpkin bar and an oat/cranberry bar. The sample with the lowest rating that was also least preferred was a pumpernickel/sea buckthorn bar. Flavour was the most important determinant of overall liking followed by texture, odour and appearance. Conclusions: Children's acceptances and preferences were highly influenced by the sensory characteristics of the bars, mainly flavour. In agreement with earlier studies, the novel food ingredients seemed to influence children's preferences. The Nordic snack bars may have a potential to be a snack option for Danish and Swedish school children, but repeated exposures to the products are recommended to increase children's acceptance.

Public acceptance of nuclear power

International Nuclear Information System (INIS)

Wildgruber, O.H.

1990-01-01

The lecture addresses the question why we need public acceptance work and provides some clues to it. It explains various human behaviour patterns which determine the basics for public acceptance. To some extent, the opposition to nuclear energy and the role the media play are described. Public acceptance efforts of industry are critically reviewed. Some hints on difficulties with polling are provided. The lecture concludes with recommendations for further public acceptance work. (author)

Consumer attitude towards sodium reduction in meat products and acceptability of fermented sausages with reduced sodium content.

Science.gov (United States)

Guàrdia, M D; Guerrero, L; Gelabert, J; Gou, P; Arnau, J

2006-07-01

Lowering salt content in meat products is possible from a technological and sensorial point of view, although little information is available about the consumers' attitude and acceptance of these products. Attitude towards low salt meat products, following the Theory of Planned Behaviour (TPB) proposed by Ajzen, was evaluated by 392 consumers. Acceptability of small calibre fermented sausages with 50% molar substitution of NaCl by six different mixtures of KCl (0-50%) and K-lactate (0-50%) and the control (22g NaCl/kg) was determined by 98 consumers. The preference of the previous best two treatments was compared to the batch control by 279 consumers. In general consumers had a positive attitude towards low salt meat products, being higher for women than for men. Women showed stronger ideas and higher Perceived Control on the Behaviour towards reduced sodium meat products than men. Smokers showed lower intense beliefs than non-smokers. Consumers with a basic level of education were more affected by what other people important for them thought they should do. The final model obtained using the Theory of Planned Behaviour showed a good predictive capacity (R(2)=0.60) and a good internal consistency. Regarding the acceptability study, batches with substitution levels of 50% and 40% by K-lactate, showed lower overall acceptance than the control batch. Significant differences in acceptability were found regarding the gender and place of residence of the consumers. The preference study showed no differences between the batch control and batches with 50% KCl and 40% KCl + 10% of K-lactate substitution levels. According to these results and from a sensorial point of view, it is possible to reduce NaCl content in small calibre fermented sausages by 50% and obtain a product acceptable for consumers.

Point Clouds to Indoor/outdoor Accessibility Diagnosis

Science.gov (United States)

Balado, J.; Díaz-Vilariño, L.; Arias, P.; Garrido, I.

2017-09-01

This work presents an approach to automatically detect structural floor elements such as steps or ramps in the immediate environment of buildings, elements that may affect the accessibility to buildings. The methodology is based on Mobile Laser Scanner (MLS) point cloud and trajectory information. First, the street is segmented in stretches along the trajectory of the MLS to work in regular spaces. Next, the lower region of each stretch (the ground zone) is selected as the ROI and normal, curvature and tilt are calculated for each point. With this information, points in the ROI are classified in horizontal, inclined or vertical. Points are refined and grouped in structural elements using raster process and connected components in different phases for each type of previously classified points. At last, the trajectory data is used to distinguish between road and sidewalks. Adjacency information is used to classify structural elements in steps, ramps, curbs and curb-ramps. The methodology is tested in a real case study, consisting of 100 m of an urban street. Ground elements are correctly classified in an acceptable computation time. Steps and ramps also are exported to GIS software to enrich building models from Open Street Map with information about accessible/inaccessible entrances and their locations.

Yield stress determination from miniaturized disk bend test data

International Nuclear Information System (INIS)

Sohn, D.S.; Kohse, G.; Harling, O.K.

1985-04-01

Methodology for testing 3.0 mm diameter by 0.25 mm thick disks by bending in a punch and die has been described previously. This paper describes the analysis of load/deflection data from such miniaturized disk bend tests (MDBT) using a finite element simulation. Good simulation has been achieved up to a point just beyond the predominantly elastic response, linear initial region. The load at which deviation from linearity begins has been found to correlate with yield stress, and yield stress has been successfully extracted from disk bend tests of a number of known materials. Although finite element codes capable of dealing with large strains and large rotations have been used, simulation of the entire load/deflection curve up to fracture of the specimen has not yet been achieved

Moses presages Kubler-Ross: five stages in accepting death, as seen in the midrash.

Science.gov (United States)

Berkowitz, M C; Knight, L

2001-11-01

This paper elucidates and explains an ancient midrash (rabbinic interpretation of a biblical text) through the lens of modern psychological theory. The midrash describes Moses' reactions to his approaching death. The paper points out that these reactions anticipate the five classic stages, described by Elizabeth Kubler-Ross, of coming to accept terminal illness: denial, anger, bargaining, depression and acceptance. The article shows the ancient rabbis' sensitivity to human feeling and the universal nature of human reaction through the dialogue and reactions they attribute to Moses. Finally, it shows how using this midrash offers a constructive model for approaching death, for Jewish and non-Jewish patients alike, as well as their caregivers.

IWGT report on quantitative approaches to genotoxicity risk assessment II. Use of point-of-departure (PoD) metrics in defining acceptable exposure limits and assessing human risk.

Science.gov (United States)

MacGregor, James T; Frötschl, Roland; White, Paul A; Crump, Kenny S; Eastmond, David A; Fukushima, Shoji; Guérard, Melanie; Hayashi, Makoto; Soeteman-Hernández, Lya G; Johnson, George E; Kasamatsu, Toshio; Levy, Dan D; Morita, Takeshi; Müller, Lutz; Schoeny, Rita; Schuler, Maik J; Thybaud, Véronique

2015-05-01

This is the second of two reports from the International Workshops on Genotoxicity Testing (IWGT) Working Group on Quantitative Approaches to Genetic Toxicology Risk Assessment (the QWG). The first report summarized the discussions and recommendations of the QWG related to the need for quantitative dose-response analysis of genetic toxicology data, the existence and appropriate evaluation of threshold responses, and methods to analyze exposure-response relationships and derive points of departure (PoDs) from which acceptable exposure levels could be determined. This report summarizes the QWG discussions and recommendations regarding appropriate approaches to evaluate exposure-related risks of genotoxic damage, including extrapolation below identified PoDs and across test systems and species. Recommendations include the selection of appropriate genetic endpoints and target tissues, uncertainty factors and extrapolation methods to be considered, the importance and use of information on mode of action, toxicokinetics, metabolism, and exposure biomarkers when using quantitative exposure-response data to determine acceptable exposure levels in human populations or to assess the risk associated with known or anticipated exposures. The empirical relationship between genetic damage (mutation and chromosomal aberration) and cancer in animal models was also examined. It was concluded that there is a general correlation between cancer induction and mutagenic and/or clastogenic damage for agents thought to act via a genotoxic mechanism, but that the correlation is limited due to an inadequate number of cases in which mutation and cancer can be compared at a sufficient number of doses in the same target tissues of the same species and strain exposed under directly comparable routes and experimental protocols. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

Acceptance of non-fuel assembly hardware by the Federal Waste Management System

International Nuclear Information System (INIS)

1990-03-01

This report is one of a series of eight prepared by E. R. Johnson Associates, Inc. (JAI) under ORNL's contract with DOE's OCRWM Systems Integration Program and in support of the Annual Capacity Report (ACR) Issue Resolution Process. The report topics relate specifically to the list of high-priority technical waste acceptance issues developed jointly by DOE and a utility-working group. JAI performed various analyses and studies on each topic to serve as starting points for further discussion and analysis leading eventually to finalizing the process by which DOE will accept spent fuel and waste into its waste management system. The eight reports are concerned with the conditions under which spent fuel and high-level waste will be accepted in the following categories: failed fuel; consolidated fuel and associated structural parts; non-fuel-assembly hardware; fuel in metal storage casks; fuel in multi-element sealed canisters; inspection and testing requirements for wastes; canister criteria; spent fuel selection for delivery; and defense and commercial high-level waste packages. 14 refs., 12 figs., 43 tabs

Yield potential of a radiation induced early-dwarf mutant in linseed

International Nuclear Information System (INIS)

Nayar, G.G.

1975-01-01

An early maturing dwarf mutant, TL-1 was isolated in the high yielding linseed (Linum usitatissimum L.) wariety Neelum following seed irradiation with 50 kR gamma rays. The yield components of the mutant have been evaluated for its productivity in the M 7 generation. TL-1 is compact and significantly short in height (41.8 +- 2.71 cm) as compared to Neelum (79.2 +- 3.08 cm). In flowering the mutant is 30 days earlier than the parent under Trombay conditions. TL-1 and Neelum did not differ significantly in their mean number of primary branches. Although the mean seed yield per plant is lower, in 1000 seed weight the mutant is markedly superior to the parent. The oil content in TL-1 is significantly higher by 3.5 percent points than Neelum and its oil is lighter in colour. By growing more plants per unit area with reduced spacing, the yield potential of TL-1 was considerably increased. The productivity of oil per hectare per day of TL-1 was higher than Neelum. (author)

Understanding consumer acceptance of intervention strategies for healthy food choices: a qualitative study.

Science.gov (United States)

Bos, Colin; Van der Lans, Ivo A; Van Rijnsoever, Frank J; Van Trijp, Hans C M

2013-11-13

The increasing prevalence of overweight and obesity poses a major threat to public health. Intervention strategies for healthy food choices potentially reduce obesity rates. Reviews of the effectiveness of interventions, however, show mixed results. To maximise effectiveness, interventions need to be accepted by consumers. The aim of the present study is to explore consumer acceptance of intervention strategies for low-calorie food choices. Beliefs that are associated with consumer acceptance are identified. Data was collected in the Netherlands in 8 semi-structured interviews and 4 focus group discussions (N = 39). Nine archetypical strategies representing educational, marketing and legal interventions served as reference points. Verbatim transcriptions were coded both inductively and deductively with the framework approach. We found that three beliefs are related to consumer acceptance: 1) general beliefs regarding obesity, such as who is responsible for food choice; 2) the perceived effectiveness of interventions; and 3) the perceived fairness of interventions. Furthermore, the different aspects underlying these general and intervention-specific beliefs were identified. General and intervention-specific beliefs are associated with consumer acceptance of interventions for low-calorie food choices. Policymakers in the food domain can use the findings to negotiate the development of interventions and to assess the feasibility of interventions. With respect to future research, we recommend that segments of consumers based on perceptions of intervention strategies are identified.

Understanding consumer acceptance of intervention strategies for healthy food choices: a qualitative study

Science.gov (United States)

2013-01-01

Background The increasing prevalence of overweight and obesity poses a major threat to public health. Intervention strategies for healthy food choices potentially reduce obesity rates. Reviews of the effectiveness of interventions, however, show mixed results. To maximise effectiveness, interventions need to be accepted by consumers. The aim of the present study is to explore consumer acceptance of intervention strategies for low-calorie food choices. Beliefs that are associated with consumer acceptance are identified. Methods Data was collected in the Netherlands in 8 semi-structured interviews and 4 focus group discussions (N = 39). Nine archetypical strategies representing educational, marketing and legal interventions served as reference points. Verbatim transcriptions were coded both inductively and deductively with the framework approach. Results We found that three beliefs are related to consumer acceptance: 1) general beliefs regarding obesity, such as who is responsible for food choice; 2) the perceived effectiveness of interventions; and 3) the perceived fairness of interventions. Furthermore, the different aspects underlying these general and intervention-specific beliefs were identified. Conclusions General and intervention-specific beliefs are associated with consumer acceptance of interventions for low-calorie food choices. Policymakers in the food domain can use the findings to negotiate the development of interventions and to assess the feasibility of interventions. With respect to future research, we recommend that segments of consumers based on perceptions of intervention strategies are identified. PMID:24225034

Investigation of a novel dew point indirect evaporative air conditioning system for buildings

OpenAIRE

Duan, Zhiyin

2011-01-01

This study aims to improve the performance of existing indirect evaporative coolers. A new dew point indirect evaporative cooler with counter-current heat/mass exchanger was developed in this research by optimal design, material selection, numerical simulation, experimental investigations and economic, environmental, regional acceptance analysis. A new dew point heat/mass exchanger using a counter-current flow pattern was designed by numerical simulation in terms of material, structure, g...

Dew point, internal gas pressure, and chemical composition of the gas within the free volume of DWPF canistered waste forms

International Nuclear Information System (INIS)

Harbour, J.R.; Herman, D.T.; Crump, S.; Miller, T.J.; McIntosh, J.

1996-01-01

The Defense Waste Processing Facility (DWPF) produced 55 canistered waste forms containing simulated waste glass during the four Waste Qualification campaigns of the DWPF Startup Test Program. Testing of the gas within the free volume of these canisters for dew point, internal gas pressure, and chemical composition was performed as part of a continuing effort to demonstrate compliance with the Waste Acceptance Product Specifications. Results are presented for six glass-filled canisters. The dew points within the canisters met the acceptance criterion of < 20 degrees C for all six canisters. Factors influencing the magnitude of the dew point are presented. The chemical composition of the free volume gas was indistinguishable from air for all six canisters. Hence, no foreign materials were present in the gas phase of these canisters. The internal gas pressures within the sealed canisters were < 1 atm at 25 degrees C for all six canisters which readily met the acceptance criterion of an internal gas pressure of less than 1.5 atm at 25 degrees C. These results provided the evidence required to demonstrate compliance with the Waste Acceptance Product Specifications

Blind and Deaf to Acceptance: The Role of Self-Esteem in Capitalizing on Social Acceptance

OpenAIRE

Luerssen, Anna Maud

2013-01-01

Across two studies, we evaluated whether people with low self-esteem are less likely to capitalize on, or take full advantage of, their romantic partners' accepting behaviors. We conceptualized capitalization as the tendency to perceive acceptance when it occurs, and to experience positive changes in affect and relationship satisfaction when acceptance is perceived. We found that participants with low self-esteem under-perceived their partners' acceptance, both in daily life and in the labora...

Neutron yield in experiments with Z-pinches in frozen deuterium filaments

International Nuclear Information System (INIS)

Meierovich, B.E.; Sukhorukov, S.T.

1991-01-01

Experiments on the properties of the neutron yield and stability of dense Z-pinches in frozen deuterium filaments two years ago have still not received a proper explanation. A discharge in a dielectric deuterium filament differs qualitatively in its behavior from one in a metal conductor. The authors assert attempts to interpret the experiment have not taken this fact properly into account. The enhanced stability and substantial neutron yield do not follow from the classical picture of a Bennett equilibrium in the current channel. The most important experimental characteristic of a discharge in frozen deuterium is the dependence of the neutron yield on the current strength at a given stage. The spread in the experimental points is quite large so one naturally prefers t describe the experimental data by means of a physically simple model and not go to a full-scale simulation of all the processes. When the deuterium is fully ionized the electron drift velocity is smaller than the thermal velocity, enabling calculation of the neutron yield by means of a self-similar model of the Z-pinch compression which treats electron degeneracy. To find the neutron yield it suffices to consider only the first half-period of the self-similar oscillations including the state of maximum compression. The subsequent evolution of the current channel, which is associated with radial expansion, does not contribute significantly to the neutron yield

Measurement of photo-neutron cross sections and isomeric yield ratios in the {sup 89}Y(γ,xn){sup 89-x}Y reactions at the bremsstrahlung end-point energies of 65, 70 and 75 MeV

Energy Technology Data Exchange (ETDEWEB)

Tatari, Mansoureh [Yazd Univ. (Iran, Islamic Republic of). Physics Dept.; Naik, Haladhara [Bhabha Atomic Research Centre, Mumbai (India). Radiochemistry Div.; Kim, Guinyun; Kim, Kwangsoo [Kyungpook National Univ., Daegu (Korea, Republic of). Dept. of Physics; Shin, Sung-Gyun; Cho, Moo-Hyun [Pohang Univ. of Science and Technology (Korea, Republic of). Div. of Advanced Nuclear Engineering

2017-07-01

The flux-weighted average cross sections of the {sup 89}Y(γ,xn; x=1-4){sup 89-x}Y reactions and the isomeric yield ratios of the {sup 87m,g}Y, {sup 86m,g}Y, and {sup 85m,g}Y radionuclides produced in these reactions with the bremsstrahlung end-point energies of 65, 70 and 75 MeV have been determined by an activation and off-line γ-ray spectrometric technique using the 100 MeV electron linac in Pohang Accelerator Laboratory, Korea. The theoretical {sup 89}Y(γ,xn; x=1-4){sup 89-x}Y reaction cross sections for mono-energetic photons have been calculated using the computer code TALYS 1.6. Then the flux-weighted theoretical values were obtained to compare with the present data. The flux-weighted experimental and theoretical {sup 89}Y(γ,xn; x=1-4){sup 89-x}Y reaction cross sections increase very fast from the threshold values to a certain bremsstrahlung energy, where the other reaction channels open up. Thereafter it remains constant a while and then slowly decreases with the increase of cross sections for other reactions. Similarly, the isomeric yield ratios of {sup 87m,g}Y, {sup 86m,g}Y and {sup 85m,g}Y in the {sup 89}Y(γ,xn; x=2-4){sup 89-x}Y reactions from the present work and literature data show an increasing trend from their respective threshold values to a certain bremsstrahlung energy. After a certain point of energy, the isomeric yield ratios increase slowly with the bremsstrahlung energy. These observations indicate the role of excitation energy and its partitioning in different reaction channels.

Acceptance noise level: effects of the speech signal, babble, and listener language.

Science.gov (United States)

Shi, Lu-Feng; Azcona, Gabrielly; Buten, Lupe

2015-04-01

The acceptable noise level (ANL) measure has gained much research/clinical interest in recent years. The present study examined how the characteristics of the speech signal and the babble used in the measure may affect the ANL in listeners with different native languages. Fifteen English monolingual, 16 Russian-English bilingual, and 24 Spanish-English bilingual listeners participated. The ANL was obtained in eight conditions varying in the language of the signal (English and Spanish), language of the babble (English and Spanish), and number of talkers in the babble (4 and 12). Test conditions were randomized across listeners. The ANL for each condition was based on a minimum of two trials. Russian-English bilinguals yielded higher ANLs than other listeners; the intergroup difference of 4-5 dB was statistically and clinically significant. Spanish signals yielded significantly higher ANLs than English signals, but this difference of 0.5 dB was clinically negligible. The language and composition of the babble had a significant effect on Russian-English bilinguals, who yielded higher ANLs with the Spanish than English 12-talker babble. The above findings do not fully support the notion that the ANL is language- and population-independent. Clinicians should be aware of possible effects on ANL measures due to listeners' linguistic/cultural background.

A density based algorithm to detect cavities and holes from planar points

Science.gov (United States)

Zhu, Jie; Sun, Yizhong; Pang, Yueyong

2017-12-01

Delaunay-based shape reconstruction algorithms are widely used in approximating the shape from planar points. However, these algorithms cannot ensure the optimality of varied reconstructed cavity boundaries and hole boundaries. This inadequate reconstruction can be primarily attributed to the lack of efficient mathematic formulation for the two structures (hole and cavity). In this paper, we develop an efficient algorithm for generating cavities and holes from planar points. The algorithm yields the final boundary based on an iterative removal of the Delaunay triangulation. Our algorithm is mainly divided into two steps, namely, rough and refined shape reconstructions. The rough shape reconstruction performed by the algorithm is controlled by a relative parameter. Based on the rough result, the refined shape reconstruction mainly aims to detect holes and pure cavities. Cavity and hole are conceptualized as a structure with a low-density region surrounded by the high-density region. With this structure, cavity and hole are characterized by a mathematic formulation called as compactness of point formed by the length variation of the edges incident to point in Delaunay triangulation. The boundaries of cavity and hole are then found by locating a shape gradient change in compactness of point set. The experimental comparison with other shape reconstruction approaches shows that the proposed algorithm is able to accurately yield the boundaries of cavity and hole with varying point set densities and distributions.

Similar estimates of temperature impacts on global wheat yield by three independent methods

NARCIS (Netherlands)

Liu, Bing; Asseng, Senthold; Müller, Christoph; Ewert, Frank; Elliott, Joshua; Lobell, David B.; Martre, Pierre; Ruane, Alex C.; Wallach, Daniel; Jones, James W.; Supit, Iwan; Wolf, Joost

2016-01-01

The potential impact of global temperature change on global crop yield has recently been assessed with different methods. Here we show that grid-based and point-based simulations and statistical regressions (from historic records), without deliberate adaptation or CO 2 fertilization effects,

Relative Critical Points

Directory of Open Access Journals (Sweden)

Debra Lewis

2013-05-01

Full Text Available Relative equilibria of Lagrangian and Hamiltonian systems with symmetry are critical points of appropriate scalar functions parametrized by the Lie algebra (or its dual of the symmetry group. Setting aside the structures – symplectic, Poisson, or variational – generating dynamical systems from such functions highlights the common features of their construction and analysis, and supports the construction of analogous functions in non-Hamiltonian settings. If the symmetry group is nonabelian, the functions are invariant only with respect to the isotropy subgroup of the given parameter value. Replacing the parametrized family of functions with a single function on the product manifold and extending the action using the (coadjoint action on the algebra or its dual yields a fully invariant function. An invariant map can be used to reverse the usual perspective: rather than selecting a parametrized family of functions and finding their critical points, conditions under which functions will be critical on specific orbits, typically distinguished by isotropy class, can be derived. This strategy is illustrated using several well-known mechanical systems – the Lagrange top, the double spherical pendulum, the free rigid body, and the Riemann ellipsoids – and generalizations of these systems.

Acceptability of Weaning Mixes from Locally Available Foods

International Nuclear Information System (INIS)

Thwin, Theingi

2014-01-01

Full text: Two types of legume-based (lentils/chickpea) and two types of fish-based (carp/catfish) formulas have been made in the form of dry powder, from locally available foods. By analysis of the nutrient composition of formulas, the lentil formula provides 410 calories (11.7g of protein), chickpea formula (418 calories, 13.5g of protein), catfish formula (428 calories, 16.1g of protein) and carp formula (432 calories, 15.8g of protein) in 100g dry weight of each formula. All the formulas were adequate in protein and energy density to meet the WHO recommended value for nutrition needs of 6-12 months old infants. The results of bacteriological analyses showed all the samples were within the recommended microbiological limits for dried products requiring preparation with boiling water. No physical changes were observed when the formulas were stored in sealed plastic bags at room temperature for 6 months. Developed products were evaluated for their acceptability by a panel of 20 persons using 4-point Hedonic Rating Scale. Results from sensory analysis showed that catfish formula obtained highest score for its color, lentil formula for its aroma and taste, and the lowest to carp formula. In the acceptability trials done on 25 children, 82%-90% of the mothers reported that the mixes were acceptable to their children. No adverse side effects were noticed. More than half of the mothers reported their children refused to eat other family foods and showed an obvious preference for the mixes, especially the one made by lentil. (author)

Static strain aging of Zircaloy-2: the effect of dislocation dynamics on yielding behaviour

International Nuclear Information System (INIS)

Thorpe, W.R.; Smith, I.O.

1981-01-01

The static strain-aging response of Zircaloy-2 was determined in the temperature range 293-723 K. A modified Hahn yielding model was found to provide a satisfactory description of the magnitude and shape of the yield points after aging, thereby providing information about the mobile dislocation density and the dislocation generation rate. For example, the characteristic double peak in the temperature dependence of strain aging was simplified to a single broad minimum in the mobile dislocation density over the temperature interval 500-700 K. The shape of the yield point was also found to be temperature dependent; the yield drop became less sharp at test temperatures above 648 K. This was ascribed to the inhibition of dislocation multiplication by dynamic strain aging. A kinetic law was developed by applying Snoek ordering kinetics to the process of dislocation locking and the resultant change in mobile dislocation density was then used to predict the strain-aging response as a function of aging time. The stress dependence of strain aging at 573 K was investigated at aging stresses of between 0.07 and 0.975 of the flow stress sigmasub(f). The strain-aging response increased for aging at stresses between 0.07sigmassub(f) and 0.8sigmasub(f), whereafter it declined steeply to the limit of zero at the flow stress. (Auth.)

Does green consumerism increase the acceptance of wind power?

DEFF Research Database (Denmark)

Thøgersen, John; Noblet, Caroline

2012-01-01

sustainability,referred to as ‘‘catalytic’’ or ‘‘wedge’’ behaviours. Despite the obvious need for innovative approaches to promote important pro-environmental behaviour, and sound theoretical backing for such concepts, there is a lack of research testing the key propositions of this approach. In a survey study......In this paper,we discuss what might be termed an action-based learning approach to promoting important pro-environmentalactions,such as support for or acceptance of environmental policy.Such an approach involves promoting simple and easy behaviours as entry points for more radical steps towards...

The yield drop at or below 423 K in Zr single crystals and in Ti

International Nuclear Information System (INIS)

Ferron, A.; Malik, L.M.; Dickson, J.I.

1979-01-01

Yield drops were obtained in interrupted tensile and compression tests performed on zirconium single crystals between 262 and 362 K. Near 295 K, where most tests were performed, a minimum yield drop was obtained for an aging performed near the internal stress. For positive stress relaxations and a constant aging time, this yield drop increased linearly with the stress relaxed during aging. This result indicates a significant portion of the yield drop is caused by dislocations gliding to pinning points, which are most probably forest dislocations. A similar behaviour was observed for polycrystalline titanium at 423 K. The yield drops observed in the single crystals at 295 K, after aging at zero stress, increased linearly with the logarithm of the aging time in contrast to the time-independent Haasen-Kelly effect observed in polycrystalline material. (auth)

Electricity supply between acceptance, acceptability and social compatibility; Energieversorgung zwischen Akzeptanz, Akzeptabilitaet und Sozialvertraeglichkeit

Energy Technology Data Exchange (ETDEWEB)

Schubert, Katharina; Koch, Marco K. [Bochum Univ. (Germany). Lehrstuhl Energiesysteme und Energiewirtschaft (LEE)

2012-11-01

Acceptance promotion is supposed to be an indispensable premise for a successful realization of an energy concept. The contribution identifies deficiencies of the energy policy, including intransparency, complexity of decision procedures, for instance in case of the so called energy transmission line extension acceleration law, that has caused irritation and anger in the public. The justification of acceptance promotion is questioned in connection with the German nuclear policy reversal following the Fukushima accident. A research program ''public acceptance of large-scale power plants for electricity generation'' is presented. The issues criteria and limits of acceptability are of main importance for this discussion.

Zone of Acceptance Under Performance Measurement: Does Performance Information Affect Employee Acceptance of Management Authority?

DEFF Research Database (Denmark)

Nielsen, Poul Aaes; Jacobsen, Christian Bøtcher

2018-01-01

Public sector employees have traditionally enjoyed substantial influence and bargaining power in organizational decision making, but few studies have investigated the formation of employee acceptance of management authority. Drawing on the ‘romance of leadership’ perspective, we argue that perfor......Public sector employees have traditionally enjoyed substantial influence and bargaining power in organizational decision making, but few studies have investigated the formation of employee acceptance of management authority. Drawing on the ‘romance of leadership’ perspective, we argue...... that performance information shapes employee attributions of leader quality and perceptions of a need for change in ways that affect their acceptance of management authority, conceptualized using Simon’s notion of a ‘zone of acceptance.’ We conducted a survey experiment among 1,740 teachers, randomly assigning...... true performance information about each respondent’s own school. When employees were exposed to signals showing low or high performance, their acceptance of management authority increased, whereas average performance signals reduced employee acceptance of management authority. The findings suggest...

Exoplanet Yield Estimation for Decadal Study Concepts using EXOSIMS

Science.gov (United States)

Morgan, Rhonda; Lowrance, Patrick; Savransky, Dmitry; Garrett, Daniel

2016-01-01

The anticipated upcoming large mission study concepts for the direct imaging of exo-earths present an exciting opportunity for exoplanet discovery and characterization. While these telescope concepts would also be capable of conducting a broad range of astrophysical investigations, the most difficult technology challenges are driven by the requirements for imaging exo-earths. The exoplanet science yield for these mission concepts will drive design trades and mission concept comparisons.To assist in these trade studies, the Exoplanet Exploration Program Office (ExEP) is developing a yield estimation tool that emphasizes transparency and consistent comparison of various design concepts. The tool will provide a parametric estimate of science yield of various mission concepts using contrast curves from physics-based model codes and Monte Carlo simulations of design reference missions using realistic constraints, such as solar avoidance angles, the observatory orbit, propulsion limitations of star shades, the accessibility of candidate targets, local and background zodiacal light levels, and background confusion by stars and galaxies. The python tool utilizes Dmitry Savransky's EXOSIMS (Exoplanet Open-Source Imaging Mission Simulator) design reference mission simulator that is being developed for the WFIRST Preliminary Science program. ExEP is extending and validating the tool for future mission concepts under consideration for the upcoming 2020 decadal review. We present a validation plan and preliminary yield results for a point design.

Waste Acceptance System Requirements document (WASRD)

International Nuclear Information System (INIS)

1993-01-01

This Waste Acceptance System Requirements document (WA-SRD) describes the functions to be performed and the technical requirements for a Waste Acceptance System for accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) into the Civilian Radioactive Waste Management System (CRWMS). This revision of the WA-SRD addresses the requirements for the acceptance of HLW. This revision has been developed as a top priority document to permit DOE's Office of Environmental Restoration and Waste Management (EM) to commence waste qualification runs at the Savannah River Site's (SRS) Defense Waste Processing Facility (DWPF) in a timely manner. Additionally, this revision of the WA-SRD includes the requirements from the Physical System Requirements -- Accept Waste document for the acceptance of SNF. A subsequent revision will fully address requirements relative to the acceptance of SNF

VARIABILITY OF YIELD AND YIELD COMPONENTS IN “EGUSI ...

African Journals Online (AJOL)

journal

Estimate of expected genetic advance in seed yield plant-1 ranged between. 25.90-48.40%. ..... values in fruit and seed yield characters have been reported in culinary melon, ... and Khund, A. 2004. Extent of heterosis and heritability in some.

Fission product yields

International Nuclear Information System (INIS)

Valenta, V.; Hep, J.

1978-01-01

Data are summed up necessary for determining the yields of individual fission products from different fissionable nuclides. Fractional independent yields, cumulative and isobaric yields are presented here for the thermal fission of 235 U, 239 Pu, 241 Pu and for fast fission (approximately 1 MeV) of 235 U, 238 U, 239 Pu, 241 Pu; these values are included into the 5th version of the YIELDS library, supplementing the BIBFP library. A comparison is made of experimental data and possible improvements of calculational methods are suggested. (author)

The different timescales versus the regulatory framework and public acceptance

International Nuclear Information System (INIS)

Vigfusson, J.O.; Gay, D.

2002-01-01

Both introductory presentations and the ensuing discussions suggested that one key issue ultimately underlies any consideration about timescales and regulation: the issue of how to balance information relative to short- and distant-time risks and hence how to address the question of compliance judgement in different time frames. 'Can we judge in the same way an impact occurring now and in 50 000 or 1 million years?' was thus a central question for discussion in this group. This issue was tackled from three different points of view: ethics, science and public acceptance. (authors)

Supplementary effects of higher levels of various disaccharides on processing yield, quality properties and sensory attributes of Chinese - style pork jerky.

Science.gov (United States)

Chen, Chih-Ming; Lin, Hsien-Tang

2017-12-01

This study evaluated the supplementary effect of higher concentrations of various disaccharides on processing yield, major physicochemical properties, and sensory attributes of Chinese-style pork jerky (CSPJ). CSPJ samples were prepared by marinating sliced ham (4 mm) with three dissaccharides, including sucrose, lactose, and maltose, at 0%, 15%, 18%, 21%, and 24%. Subsequently, the CSPJ samples were dried and roasted. The moisture content, water activity, crude protein, moisture-to-protein ratio, pH, processing yield, shear force, color, and sensory attributes of the CSPJ samples were evaluated. The quality characteristics of CSPJ samples prepared with sucrose were more acceptable. By contrast, CSPJ samples prepared with lactose showed the lowest scores. However, the processing yield and moisture content were the highest for CSPJ samples prepared with lactose, which may be associated with improved benefits for cost reduction. Furthermore, sucrose and lactose supplementation resulted in contrasting quality characteristics; for example, CSPJ samples with sucrose and maltose supplementation had higher sensory scores for color than samples with lactose supplementation. Additionally, most quality characteristics of CSPJ samples with sucrose supplementation contrasted with those of the samples with lactose supplementation; for example, the samples with sucrose supplementation had higher scores for sensory attributes than those with lactose supplementation. Sucrose supplementation up to 21% to 24% was associated with the highest overall acceptability scores (5.19 to 5.80), enhanced quality characteristics, increased processing yield, and reduced production cost.

Supplementary effects of higher levels of various disaccharides on processing yield, quality properties and sensory attributes of Chinese - style pork jerky

Directory of Open Access Journals (Sweden)

Chih-Ming Chen

2017-12-01

Full Text Available Objective This study evaluated the supplementary effect of higher concentrations of various disaccharides on processing yield, major physicochemical properties, and sensory attributes of Chinese-style pork jerky (CSPJ. Methods CSPJ samples were prepared by marinating sliced ham (4 mm with three dissaccharides, including sucrose, lactose, and maltose, at 0%, 15%, 18%, 21%, and 24%. Subsequently, the CSPJ samples were dried and roasted. The moisture content, water activity, crude protein, moisture-to-protein ratio, pH, processing yield, shear force, color, and sensory attributes of the CSPJ samples were evaluated. Results The quality characteristics of CSPJ samples prepared with sucrose were more acceptable. By contrast, CSPJ samples prepared with lactose showed the lowest scores. However, the processing yield and moisture content were the highest for CSPJ samples prepared with lactose, which may be associated with improved benefits for cost reduction. Furthermore, sucrose and lactose supplementation resulted in contrasting quality characteristics; for example, CSPJ samples with sucrose and maltose supplementation had higher sensory scores for color than samples with lactose supplementation. Additionally, most quality characteristics of CSPJ samples with sucrose supplementation contrasted with those of the samples with lactose supplementation; for example, the samples with sucrose supplementation had higher scores for sensory attributes than those with lactose supplementation. Conclusion Sucrose supplementation up to 21% to 24% was associated with the highest overall acceptability scores (5.19 to 5.80, enhanced quality characteristics, increased processing yield, and reduced production cost.

Model Identification and FE Simulations: Effect of Different Yield Loci and Hardening Laws in Sheet Forming

International Nuclear Information System (INIS)

Flores, P.; Lelotte, T.; Bouffioux, C.; El Houdaigui, F.; Habraken, A.M.; Duchene, L.; Bael, A. van; He, S.; Duflou, J.

2005-01-01

The bi-axial experimental equipment developed by Flores enables to perform Baushinger shear tests and successive or simultaneous simple shear tests and plane-strain tests. Such experiments and classical tensile tests investigate the material behavior in order to identify the yield locus and the hardening models. With tests performed on two steel grades, the methods applied to identify classical yield surfaces such as Hill or Hosford ones as well as isotropic Swift type hardening or kinematic Armstrong-Frederick hardening models are explained. Comparison with the Taylor-Bishop-Hill yield locus is also provided. The effect of both yield locus and hardening model choice will be presented for two applications: Single Point Incremental Forming (SPIF) and a cup deep drawing

Model Identification and FE Simulations: Effect of Different Yield Loci and Hardening Laws in Sheet Forming

Science.gov (United States)

Flores, P.; Duchêne, L.; Lelotte, T.; Bouffioux, C.; El Houdaigui, F.; Van Bael, A.; He, S.; Duflou, J.; Habraken, A. M.

2005-08-01

The bi-axial experimental equipment developed by Flores enables to perform Baushinger shear tests and successive or simultaneous simple shear tests and plane-strain tests. Such experiments and classical tensile tests investigate the material behavior in order to identify the yield locus and the hardening models. With tests performed on two steel grades, the methods applied to identify classical yield surfaces such as Hill or Hosford ones as well as isotropic Swift type hardening or kinematic Armstrong-Frederick hardening models are explained. Comparison with the Taylor-Bishop-Hill yield locus is also provided. The effect of both yield locus and hardening model choice will be presented for two applications: Single Point Incremental Forming (SPIF) and a cup deep drawing.

Acceptable noise level

DEFF Research Database (Denmark)

Olsen, Steen Østergaard; Nielsen, Lars Holme; Lantz, Johannes

2012-01-01

The acceptable noise level (ANL) is used to quantify the amount of background noise that subjects can accept while listening to speech, and is suggested for prediction of individual hearing-aid use. The aim of this study was to assess the repeatability of the ANL measured in normal-hearing subjects...... using running Danish and non-semantic speech materials as stimuli and modulated speech-spectrum and multi-talker babble noises as competing stimuli....

Acceptable noise level

DEFF Research Database (Denmark)

Olsen, Steen Østergaard; Nielsen, Lars Holme; Lantz, Johannes

2012-01-01

The acceptable noise level (ANL) is used to quantify the amount of background noise that subjects can accept while listening to speech, and is suggested for prediction of individual hearing-aid use. The aim of this study was to assess the repeatability of the ANL measured in normal-hearing subjec...... using running Danish and non-semantic speech materials as stimuli and modulated speech-spectrum and multi-talker babble noises as competing stimuli....

Acceptance and practicability of a visual communication tool in smoking cessation counselling: a randomised controlled trial.

Science.gov (United States)

Neuner-Jehle, Stefan; Knecht, Marianne I; Stey-Steurer, Claudia; Senn, Oliver

2013-12-01

Smoking cessation advice is important for reducing the worldwide burden of disease resulting from tobacco smoking. Appropriate risk communication formats improve the success of counselling interventions in primary care. To test the feasibility and acceptance of a smoking cessation counselling tool with different cardiovascular risk communication formats including graphs, in comparison with the International Primary Care Respiratory Group (IPCRG) 'quit smoking assistance' tool. GPs were randomised into an intervention group (using our communication tool in addition to the IPCRG sheet) and a control group (using the IPCRG sheet only). We asked participants for socioeconomic data, smoking patterns, understanding of information, motivation, acceptance and feasibility, and measured the duration and frequency of counselling sessions. Twenty-five GPs performed 2.8 counselling sessions per month in the intervention group and 1.7 in the control group (p=0.3) with 114 patients. The median duration of a session was 10 mins (control group 11 mins, p=0.09 for difference). Median patients' motivation for smoking cessation was 7 on a 10-point visual analogue scale with no significant difference before and after the intervention (p=0.2) or between groups (p=0.73 before and p=0.15 after the intervention). Median patients' ratings of motivation, selfconfidence, understanding of information, and satisfaction with the counselling were 3-5 on a 5-point Likert scale, similar to GPs' ratings of acceptance and feasibility, with no significant difference between groups. Among Swiss GPs and patients, both our innovative communication tool and the IPCRG tool were well accepted and both merit further dissemination and application in research.

On risks and acceptability

International Nuclear Information System (INIS)

Watson, S.R.

1981-01-01

A very attractive notion is that it should be possible not only to determine how much risk is associated with any particular activity, but also to determine if that risk is acceptable. Stated boldly this seems an entirely unobjectionable and indeed a very acceptable notion. There is, however, underlying this idea, a mistaken view of risk which we might refer to as the ''phlogiston'' theory of risk. In this paper, presented at the SRP meeting on Ethical and Legal Aspects of Radiological Protection, the phlogiston theory of risk is described; secondly, it will be argued that it is too simple a theory to be realistic or useful; and thirdly, the management of risk will be placed in a wider decision framework. Acceptability, it will be argued is highly dependent on context, and it is not possible, therefore, to lay down generally applicable notions of acceptability. (author)

Acceptance of failed SNF [spent nuclear fuel] assemblies by the Federal Waste Management System

International Nuclear Information System (INIS)

1990-03-01

This report is one of a series of eight prepared by E. R. Johnson Associates, Inc. (JAI) under ORNL's contract with DOE's OCRWM Systems Integration Program and in support of the Annual Capacity Report (ACR) Issue Resolution Process. The report topics relate specifically to the list of high priority technical waste acceptance issues developed jointly by DOE and a utility-working group. JAI performed various analyses and studies on each topic to serve as starting points for further discussion and analysis leading eventually to finalizing the process by which DOE will accept spent fuel and waste into its waste management system. The eight reports are concerned with the conditions under which spent fuel and high level waste will be accepted in the following categories: failed fuel; consolidated fuel and associated structural parts; non-fuel-assembly hardware; fuel in metal storage casks; fuel in multi-element sealed canisters; inspection and testing requirements for wastes; canister criteria; spent fuel selection for delivery; and defense and commercial high-level waste packages. This document discusses acceptance of failed spent fuel assemblies by the Federal Waste Management System. 18 refs., 7 figs., 25 tabs

Establishing meaningful cut points for online user ratings.

Science.gov (United States)

Hirschfeld, Gerrit; Thielsch, Meinald T

2015-01-01

Subjective perceptions of websites can be reliably measured with questionnaires. But it is unclear how such scores should be interpreted in practice, e.g. is an aesthetics score of 4 points on a seven-point-scale satisfactory? The current paper introduces a receiver-operating characteristic (ROC)-based methodology to establish meaningful cut points for the VisAWI (visual aesthetics of websites inventory) and its short form the VisAWI-S. In two studies we use users' global ratings (UGRs) and website rankings as anchors. A total of 972 participants took part in the studies which yielded similar results. First, one-item UGRs correlate highly with the VisAWI. Second, cut points on the VisAWI reliably differentiate between sites that are perceived as attractive versus unattractive. Third, these cut points are variable, but only within a certain range. Together the research presented here establishes a score of 4.5 on the VisAWI which is a reasonable goal for website designers and highlights the utility of the ROC methodology to derive relevant scores for rating scales.

The Acceptance of Students with Physical Disabilities by Their Peers in Inclusive and Non-Inclusive Schools in Tehran

Directory of Open Access Journals (Sweden)

Narges Adib-Sereshki

2005-07-01

Full Text Available Objective: The present research determines the level of peer acceptance of students with physical disabilities in inclusive and non-inclusive schools. A number of studies which have sought to identify the influential factors in the success of inclusive education, have pointed out the acceptance of special need student by his/her regular peers to be a significant variable. Materials & Methods: This is a descriptive investigation. The instrument utilized was the Acceptance Scale (Voelts, 1980. The upper elementary level version that we were used consists of 34 items, two are general friendship items, two are veridicalite items, and the remaining items are acceptance items.Three response options are provided for each item,I agree, I disagree, and maybe. For such reliability, a Spearman-Brown corrected split-half reliability index of +.82 was reported, as well as an alpha coefficient of +.77. A test –retest stability coefficient of .68 was obtained by retesting a sample of 101 children on two occasions separated by three weeks. In Iran, with test retest on 72 students we got Reliability coefficient of .83. The sample includes 179 student boys and girls in grades three to five who had classmates with physical disability in their elementary schools in Tehran. This sample was randomly selected from each of the five different regions in the city of Tehran. In addition, for the purpose of comparison, a sample of fifty-five students in similar grades was studied in regular schools. The effect of gender and type of school (inclusive vs. non-inclusive on students’ acceptance of a peer with physical disability all were assessed. Results: Results indicated that acceptance level is similar in boys and in girls in inclusive schools. The girl and boy students in inclusive schools demonstrated a significantly higher level of peer acceptance than their pupils in non-inclusive schools. This difference was much more noticeable in boy students. The lowest level

yield and yield componemts of extra early maize (zea mays l.)

African Journals Online (AJOL)

SHARIFAI

maize crop and improve the soil structures and chemical nutrients of the soil. The significant interaction between intra-row spacing and poultry manure on cob diameter, 100 grain weight and grain yield showed the importance of poultry manure on yield and yield components of maize crop. Poultry manure increases both ...

An adapted yield criterion for the evolution of subsequent yield surfaces

Science.gov (United States)

Küsters, N.; Brosius, A.

2017-09-01

In numerical analysis of sheet metal forming processes, the anisotropic material behaviour is often modelled with isotropic work hardening and an average Lankford coefficient. In contrast, experimental observations show an evolution of the Lankford coefficients, which can be associated with a yield surface change due to kinematic and distortional hardening. Commonly, extensive efforts are carried out to describe these phenomena. In this paper an isotropic material model based on the Yld2000-2d criterion is adapted with an evolving yield exponent in order to change the yield surface shape. The yield exponent is linked to the accumulative plastic strain. This change has the effect of a rotating yield surface normal. As the normal is directly related to the Lankford coefficient, the change can be used to model the evolution of the Lankford coefficient during yielding. The paper will focus on the numerical implementation of the adapted material model for the FE-code LS-Dyna, mpi-version R7.1.2-d. A recently introduced identification scheme [1] is used to obtain the parameters for the evolving yield surface and will be briefly described for the proposed model. The suitability for numerical analysis will be discussed for deep drawing processes in general. Efforts for material characterization and modelling will be compared to other common yield surface descriptions. Besides experimental efforts and achieved accuracy, the potential of flexibility in material models and the risk of ambiguity during identification are of major interest in this paper.

Measurements of DT and DD neutron yields by neutron activation on TFTR

International Nuclear Information System (INIS)

Barnes, C.W.; Larson, A.R.; LeMunyan, G.

1994-01-01

A variety of elemental foils have been activated by neutron fluence from TFTR under conditions with the DT neutron yield per shot ranging from 10 12 to over 10 18 , and with the DT/(DD+DT) neutron ratio varying from 0.5% (from triton burnup) to unity. Linear response over this large dynamic range is obtained by reducing the mass of the foils and increasing the cooling time, all while accepting greatly improved counting statistics. Effects on background gamma-ray lines from foil-capsule-material contaminants. and the resulting lower limits on activation foil mass, have been determined. DT neutron yields from dosimetry standard reactions on aluminum, chromium, iron, nickel, zirconium, and indium are in agreement within the ±9% (one-sigma,) accuracy of the measurements: also agreeing are yields from silicon foils using the ACTL library cross-section. While the ENDF/B-V library has too low a cross-section. Preliminary results from a variety of other threshold reactions are presented. Use of the 115 In(n,n) 115m In reaction (0.42 times as sensitive to DT neutrons as DD neutrons) in conjunction with pure-DT reactions allows a determination of the DT/(DD+DT) ratio in trace tritium or low-power tritium beam experiments

Measurements of DT and DD neutron yields by neutron activation on TFTR

International Nuclear Information System (INIS)

Barnes, C.W.; Larson, A.R.; LeMunyan, G.

1995-03-01

A variety of elemental foils have been activated by neutron fluence from TFTR under conditions with the DT neutron yield per shot ranging from 10 12 to over 10 18 , and with the DT/(DD+DT) neutron ratio varying from 0.5% (from triton burnup) to unity. Linear response over this large dynamic range is obtained by reducing the mass of the foils and increasing the cooling time, all while accepting greatly improved counting statistics. Effects on background gamma-ray lines from foil-capsule-material contaminants, and the resulting lower limits on activation foil mass, have been determined. DT neutron yields from dosimetry standard reactions on aluminum, chromium, iron, nickel, zirconium, and indium are in agreement within the ±9% (one-sigma) accuracy of the measurements; also agreeing are yields from silicon foils using the ACTL library cross-section, while the ENDF/B-V library has too low a cross-section. Preliminary results from a variety of other threshold reactions are presented. Use of the 115 In(n.n') 115m In reaction (0.42 times as sensitive to DT neutrons as DD neutrons) in conjunction with pure-DT reactions allows a determination of the DT/(DD+DT) ratio in trace tritium or low-power tritium beam experiments

[Acceptance or refusal of abortion for maternal reasons. Survey of 3021 employees of the Federal Government].

Science.gov (United States)

García Romero, H; González González, A; García Barrios, C; Galicia, J

2000-05-01

A survey was conducted among 3021 employees from the Mexican Federal Government regarding their acceptance or rejection of abortion in five different circumstances. Socioeconomic information was obtained from the interviewed and the result was that 23% totally rejected abortion, and 6% accepted abortion in any situation. Abortion was accepted by 61% in case of pregnancy threatens the mother's life; 63% in case a single woman has been raped; 41% if there are so many children and such situation implies economic problems for the family; 13% if the couple prefers to wait for an economic improvement; and 18% if the couple has decided to have no more than two kids. Also from the interviewed, 16% pointed out that abortion must be an exclusive decision from the woman and 29% thought it must be a shared decision with the partner. Abortion is better accepted by young people, by couples with few children or living in free union and by people with higher education level and higher income. It is also better accepted by people with no religion, or people who do not attend religious services or by whom religion does not affect their decisions in life.

Inheritance of grain yield and its correlation with yield components in ...

African Journals Online (AJOL)

SAM

2014-03-19

Mar 19, 2014 ... 7 × 7 incomplete diallel cross of seven wheat parents during the crop season of 2009 to 2010. Mean square of general ... Genetic background and yield traits of the seven parents. Parent. Pedigree. Released year ..... Correlation and path analysis for yield and yield contributing characters in wheat (Triticum ...

Charge yield for cobalt-60 and 10-keV x-ray irradiations of MOS devices

International Nuclear Information System (INIS)

Shaneyfelt, M.R.; Fleetwood, D.M.; Schwank, J.R.; Hughes, K.L.

1991-01-01

In this paper the radiation response of MOS devices exposed to 60 Co and low-energy (∼10 keV) x-ray irradiation is evaluated as a function of electric field during exposure. Improved charge yield estimates are obtained for 60 Co irradiations at fields below 1 MV/cm by matching voltage shifts due to oxide-trap and interface-trap charge to an E -0.55 electric field dependence. Combining these improved charge yield estimates and calculated dose enhancement factors, the relative response of x-ray to 60 Co irradiations is accurately predicted for oxide electric fields from 0.03 MV/cm to 5.0 MV/cm. The ability to predict the relative response of x-ray to 60 Co irradiations should speed acceptance of x-ray testers as a hardness assurance tool

Effect of fat content on the physical properties and consumer acceptability of vanilla ice cream.

Science.gov (United States)

Rolon, M Laura; Bakke, Alyssa J; Coupland, John N; Hayes, John E; Roberts, Robert F

2017-07-01

Ice cream is a complex food matrix that contains multiple physical phases. Removal of 1 ingredient may affect not only its physical properties but also multiple sensory characteristics that may or may not be important to consumers. Fat not only contributes to texture, mouth feel, and flavor, but also serves as a structural element. We evaluated the effect of replacing fat with maltodextrin (MD) on select physical properties of ice cream and on consumer acceptability. Vanilla ice creams were formulated to contain 6, 8, 10, 12, and 14% fat, and the difference was made up with 8, 6, 4, 2, and 0% maltodextrin, respectively, to balance the mix. Physical characterization included measurements of overrun, apparent viscosity, fat particle size, fat destabilization, hardness, and melting rate. A series of sensory tests were conducted to measure liking and the intensity of various attributes. Tests were also conducted after 19 weeks of storage at -18°C to assess changes in acceptance due to prolonged storage at unfavorable temperatures. Then, discrimination tests were performed to determine which differences in fat content were detectable by consumers. Mix viscosity decreased with increasing fat content and decreasing maltodextrin content. Fat particle size and fat destabilization significantly increased with increasing fat content. However, acceptability did not differ significantly across the samples for fresh or stored ice cream. Following storage, ice creams with 6, 12, and 14% fat did not differ in acceptability compared with fresh ice cream. However, the 8% fat, 6% MD and 10% fat, 4% MD ice creams showed a significant drop in acceptance after storage relative to fresh ice cream at the same fat content. Consumers were unable to detect a difference of 2 percentage points in fat level between 6 and 12% fat. They were able to detect a difference of 4 percentage points for ice creams with 6% versus 10%, but not for those with 8% versus 12% fat. Removing fat and replacing

A Doubly Stochastic Change Point Detection Algorithm for Noisy Biological Signals

Directory of Open Access Journals (Sweden)

Nathan Gold

2018-01-01

Full Text Available Experimentally and clinically collected time series data are often contaminated with significant confounding noise, creating short, noisy time series. This noise, due to natural variability and measurement error, poses a challenge to conventional change point detection methods. We propose a novel and robust statistical method for change point detection for noisy biological time sequences. Our method is a significant improvement over traditional change point detection methods, which only examine a potential anomaly at a single time point. In contrast, our method considers all suspected anomaly points and considers the joint probability distribution of the number of change points and the elapsed time between two consecutive anomalies. We validate our method with three simulated time series, a widely accepted benchmark data set, two geological time series, a data set of ECG recordings, and a physiological data set of heart rate variability measurements of fetal sheep model of human labor, comparing it to three existing methods. Our method demonstrates significantly improved performance over the existing point-wise detection methods.

Operations Acceptance Management

OpenAIRE

Suchá, Ivana

2010-01-01

This paper examines the process of Operations Acceptance Management, whose main task is to control Operations Acceptance Tests (OAT). In the first part the author focuses on the theoretical ground for the problem in the context of ITSM best practices framework ITIL. Benefits, process pitfalls and possibilities for automation are discussed in this part. The second part contains a case study of DHL IT Services (Prague), where a solution optimizing the overall workflow was implemented using simp...

The acceptability of arguments in favour of and against the Iraq War

Directory of Open Access Journals (Sweden)

Juan LaLlave

2005-10-01

Full Text Available This paper reports on research based on an experimental questionnaire designed using the logic and the basic structure of the Moral Judgment Test (MJT by Lind (1982. The study aims at understanding how respondents' acceptance of political arguments may have contributed to the lack of international support for the Iraq war and/or to the failure to prevent a preemptive attack. It examines factors, which respondents may have relied on in their acceptance of the arguments. The instrument consisted of three components: (1 A brief vignette on the declared beginning (March 19, 2003 and ending (May 1, 2003 of major operations in Iraq. (2 Respondents' own agreement with the need for the war. (3 Twelve arguments from political speeches: Six arguments by Bush and Blair "in favor of" (pro, and six arguments by Chirac and Schroeder "against" (con the need for the Iraq war. We scored each argument using Kohlberg's (1984 stage theory and Commons' Hierarchical Complexity Scoring System (HCSS (Commons et al., 2004, which identifies hierarchical features in the structure. Using Kempf's (2003 Cognitive Escalation and De-Escalation Model (CEDM we scored each argument sentence for details. Our sample consists of (N = 397 respondents of which were 56.4% women, 24.2% men, and 19.4% did not specify. The largest groups consisted of 71% Germans, 37.2% Catholics, 74.3% between the ages of 18-20 with high school education. Another group consisted of 8.6% Americans with a broader spectrum in age and higher educational level. Using 7 point Likert scales, respondents rated whether they would have rejected or accepted the main point of each argument, whether the main point of the argument seemed illusory or realistic, and whether the emotion evoked by the argument was destructive or constructive. The analysis of the data aimed at determining which within subject and between subject design factors were relevant in predicting respondents' acceptance of arguments and the

Gerontechnology acceptance by elderly Hong Kong Chinese: a senior technology acceptance model (STAM).

Science.gov (United States)

Chen, Ke; Chan, Alan Hoi Shou

2014-01-01

The purpose of this study was to develop and test a senior technology acceptance model (STAM) aimed at understanding the acceptance of gerontechnology by older Hong Kong Chinese people. The proposed STAM extended previous technology acceptance models and theories by adding age-related health and ability characteristics of older people. The proposed STAM was empirically tested using a cross-sectional questionnaire survey with a sample of 1012 seniors aged 55 and over in Hong Kong. The result showed that STAM was strongly supported and could explain 68% of the variance in the use of gerontechnology. For older Hong Kong Chinese, individual attributes, which include age, gender, education, gerontechnology self-efficacy and anxiety, and health and ability characteristics, as well as facilitating conditions explicitly and directly affected technology acceptance. These were better predictors of gerontechnology usage behaviour (UB) than the conventionally used attitudinal factors (usefulness and ease of use).

Potassium fertilization and sowing seasons on protein yield in soybean cultivars

Directory of Open Access Journals (Sweden)

Maria D. de Lima

Full Text Available ABSTRACT The present study was conducted in order to determine the effects of potassium (K fertilizer doses on the protein yield of different soybean cultivars, sown in two seasons, in the agricultural year 2013/14 (12/05/13 and 01/23/14, in Palmas-TO, Brazil. The experimental design, in each sowing season, was randomized blocks with 60 treatments and three replicates. The treatments were arranged in a 10 × 6 factorial scheme, represented by ten cultivars (BRS 325RR, M 9144RR, BRS 33871RR, TMG 1288RR, BRS 333RR, P 98Y70RR, TMG 1180RR, BRS 9090RR, M 8766RR and BRS 8990RR and six doses of K fertilizer (0, 40, 80, 120, 160 and 200 kg ha-1 K2O. The late sowing decreased the protein yield. K fertilization increased the protein yield in soybean cultivars. The BRS 9090RR, BRS 33871RR and BRS 333RR cultivars, at high and low K doses, were the most promising for the protein yield, and their cultivation is strategic from the economic and environmental point of view.

Methods for solving the stochastic point reactor kinetic equations

International Nuclear Information System (INIS)

Quabili, E.R.; Karasulu, M.

1979-01-01

Two new methods are presented for analysis of the statistical properties of nonlinear outputs of a point reactor to stochastic non-white reactivity inputs. They are Bourret's approximation and logarithmic linearization. The results have been compared with the exact results, previously obtained in the case of Gaussian white reactivity input. It was found that when the reactivity noise has short correlation time, Bourret's approximation should be recommended because it yields results superior to those yielded by logarithmic linearization. When the correlation time is long, Bourret's approximation is not valid, but in that case, if one can assume the reactivity noise to be Gaussian, one may use the logarithmic linearization. (author)

Public acceptance of small reactors

International Nuclear Information System (INIS)

McDougall, D.S.

1997-01-01

The success of any nuclear program requires acceptance by the local public and all levels of government involved in the decision to initiate a reactor program. Public acceptance of a nuclear energy source is a major challenge in successful initiation of a small reactor program. In AECL's experience, public acceptance will not be obtained until the public is convinced that the specific nuclear program is needed, safe and economic and environmental benefit to the community. The title of public acceptance is misleading. The objective of the program is a fully informed public. The program proponent cannot force public acceptance, which is beyond his control. He can, however, ensure that the public is informed. Once information has begun to flow to the public by various means as will be explained later, the proponent is responsible to ensure that the information that is provided by him and by others is accurate. Most importantly, and perhaps most difficult to accomplish, the proponent must develop a consultative process that allows the proponent and the public to agree on actions that are acceptable to the proponent and the community

Nitrogen rate strategies for reducing yield-scaled nitrous oxide emissions in maize

Science.gov (United States)

Zhao, Xu; Nafziger, Emerson D.; Pittelkow, Cameron M.

2017-12-01

development of more scalable environmental N loss mitigation strategies, yield tradeoffs occurring at the critical point of adoption (i.e. the farm-level) should be considered.

Effects of cutting frequency on alfalfa yield and yield components in ...

African Journals Online (AJOL)

Effects of cutting frequency on alfalfa yield and yield components in Songnen Plain, Northeast China. J Chen, F Tang, R Zhu, C Gao, G Di, Y Zhang. Abstract. The productivity and quality of alfalfa (Medicago sativa L.) is strongly influenced by cutting frequency (F). To clarify that the yield and quality of alfalfa if affected by F, ...

Nuclear waste and public acceptance. A study about the situation in the Netherlands

International Nuclear Information System (INIS)

Damveld, H.

1999-01-01

The author bases the paper and study on the concept of the risk society coined by the sociologist Ulrich Beck. Very briefly, risk society means that in modern societies the basic conflicts have shifted from the distribution of prosperity to distribution of risks. The author points out five important factors affecting the willingness to accept a risk, which all have negative indication for the case of nuclear energy. 1. Catastrophe effect: The willingness to accept a more probable risk with less serious consequences is greater than the willingness to accept an extremely unlikely risk with serious consequences. Nuclear energy is considered to be a risk with catastrophe effect. 2. Justice factor: This factor too plays a central role in the negative assessment of nuclear energy. It is considered to be unjust to impose risks on future generations. 3. Voluntariness: The acceptance of a risk increases with the voluntariness. But nuclear energy is not considered to be a voluntary risk. 4. Confidence: The extent of confidence is an important factor determing how information on a possible risk will be assessed. In the Netherlands 68 percent of the population does not trust that the government will provide immediate and honest information on nuclear accidents. 5. Avoidability: An inevitable risk is more likely to be accepted than an avoidable risk. If already produced waste is involved and if there is even a chance that the nuclear power station concerned will be shut-down, the population is more likely to accept the final repository than if it were a case of searching for a final repository for waste not yet produced. (orig.) [de

Enrichment of Biscuits with Matcha Green Tea Powder: Its Impact on Consumer Acceptability and Acute Metabolic Response

Directory of Open Access Journals (Sweden)

Benjapor Phongnarisorn

2018-02-01

Full Text Available Matcha green tea powder (MGTP is made with finely ground green tea leaves that are rich in phytochemicals, most particularly catechins. Shortbread biscuits were enriched with MGTP and evaluated for consumer acceptability and potential functional health properties. Baking decreased the content of total catechins by 19% compared to dough, although epimerization increased the amount of (+-gallocatechin gallate at the expense of other catechins such as (−-epigallocatechin gallate. Consumer acceptability tests using a 9-point hedonic scale showed that consumers preferred enriched biscuits with low content of MGTP (2 g of MGTP 100 g−1 of flour, and an increase of sugar content did not significantly improve the acceptability of MGTP-enriched biscuits. Overall, enrichment of biscuits with MGTP did not significantly affect the postprandial glucose or triglyceride response (area under curve compared to non-enriched biscuits consumed with water or MGTP drink. Enriching biscuits with Matcha green tea is acceptable to consumers, but may not bring significant postprandial effects.

Yield gap mapping as a support tool for risk management in agriculture

Science.gov (United States)

Lahlou, Ouiam; Imani, Yasmina; Slimani, Imane; Van Wart, Justin; Yang, Haishun

2016-04-01

The increasing frequency and magnitude of droughts in Morocco and the mounting losses from extended droughts in the agricultural sector emphasized the need to develop reliable and timely tools to manage drought and to mitigate resulting catastrophic damage. In 2011, Morocco launched a cereals multi-risk insurance with drought as the most threatening and the most frequent hazard in the country. However, and in order to assess the gap and to implement the more suitable compensation, it is essential to quantify the potential yield in each area. In collaboration with the University of Nebraska-Lincoln, a study is carried out in Morocco and aims to determine the yield potentials and the yield gaps in the different agro-climatic zones of the country. It fits into the large project: Global Yield Gap and Water Productivity Atlas: http://www.yieldgap.org/. The yield gap (Yg) is the magnitude and difference between crop yield potential (Yp) or water limited yield potential (Yw) and actual yields, reached by farmers. World Food Studies (WOFOST), which is a Crop simulation mechanistic model, has been used for this purpose. Prior to simulations, reliable information about actual yields, weather data, crop management data and soil data have been collected in 7 Moroccan buffer zones considered, each, within a circle of 100 km around a weather station point, homogenously spread across the country and where cereals are widely grown. The model calibration was also carried out using WOFOST default varieties data. The map-based results represent a robust tool, not only for drought insurance organization, but for agricultural and agricultural risk management. Moreover, accurate and geospatially granular estimates of Yg and Yw will allow to focus on regions with largest unexploited yield gaps and greatest potential to close them, and consequently to improve food security in the country.

Sensory Acceptability of Iron-Fortified Red Lentil (Lens culinaris Medik.) Dal.

Science.gov (United States)

Podder, Rajib; Khan, Shaan M; Tar'an, Bunyamin; Tyler, Robert T; Henry, Carol J; Jalal, Chowdhury; Shand, Phyllis J; Vandenberg, Albert

2018-03-01

Panelists in Saskatoon, Canada (n = 45) and Dhaka, Bangladesh (n = 98) participated in sensory evaluations of the sensory properties of both cooked and uncooked dehulled red lentil dal fortified with FeSO 4 ·7H 2 O, NaFeEDTA or FeSO 4 ·H 2 O at fortificant Fe concentrations of 800, 1,600 (both cooked and uncooked), or 2,800 ppm. Appearance, odor, and overall acceptability of cooked and uncooked samples were rated using a 9-point hedonic scale (1 = dislike extremely to 9 = like extremely). Taste and texture were rated for the cooked samples prepared as typical south Asian lentil meals. Significant differences in sensory quality were observed among all uncooked and cooked samples at both locations. Overall, scores for all sensory attributes and acceptability of uncooked lentil decreased with increasing concentration of Fe in the fortificant; however, Fe fortification (particularly with NaFeEDTA) had small effects on acceptability. Panelists from Saskatoon provided a wider range of scores than those from Bangladesh for all attributes of cooked lentil. Overall, sensory evaluation of Fe fortification using NaFeEDTA minimally affected consumer perception of color, taste, texture, odor, and overall acceptability of cooked lentil. Reliability estimates (Cronbach's alpha [CA]) indicated that consumer scores were generally consistent for all attributes of all lentil samples (mean CA > 0.80). NaFeEDTA was found to be the most suitable Fe fortificant for lentil based on consumer acceptability. Consumption of 45 to 50 g of NaFeEDTA-fortified lentil (fortificant Fe concentration of 1,600 ppm) per day meets the estimated average requirements (EARs) of Fe for humans (10.8 to 29.4 mg). Iron fortification of dehulled lentil dal may change organoleptic attributes that can influence consumer acceptability. Sensory evaluation by consumers helps to determine the effect on appearance, odor, taste, texture, and overall acceptability of fortified lentils. In this study, consumer

A survey of the clinical acceptability of screening for postnatal depression in depressed and non-depressed women

Directory of Open Access Journals (Sweden)

Ericksen Jennifer

2006-08-01

Full Text Available Abstract Background Information on clinical acceptability is needed when making cost-utility decisions about health screening implementation. Despite being in use for two decades, most data on the clinical acceptability of the Edinburgh Postnatal Depression Scale (EPDS come from qualitative reports, or include relatively small samples of depressed women. This study aimed to measure acceptability in a survey of a relatively large, community sample with a high representation of clinically depressed women. Methods Using mail, telephone and face-to-face interview, 920 postnatal women were approached to take part in a survey on the acceptability of the EPDS, including 601 women who had screened positive for depression and 245 who had received DSM-IV diagnoses of depression. Acceptability was measured on a 5-point Likert scale of comfort ranging from "Not Comfortable", through "Comfortable" to "Very Comfortable". Results The response rate was just over half for postal surveys (52% and was 100% for telephone and face-to-face surveys (432, 21 and 26 respondents for postal, telephone and face-to-face surveys respectively making 479 respondents in total. Of these, 81.2% indicated that screening with the EPDS had been in the range of "Comfortable" to "Very Comfortable". The other 18.8 % rated screening below the "Comfortable" point, including a small fraction (4.3% who rated answering questions on the EPDS as "Not Comfortable" at the extreme end of the scale. Comfort was inversely related to EPDS score, but the absolute size of this effect was small. Almost all respondents (97% felt that screening was desirable. Conclusion The EPDS had good acceptability in this study for depressed and non-depressed women. Women's views on the desirability of postnatal depression screening appear to be largely independent of personal level of comfort with screening. These results should be useful to policy-makers and are broadly supportive of the Edinburgh Postnatal

Commercially sterilized mussel meats (Mytilus chilensis): a study on process yield.

Science.gov (United States)

Almonacid, S; Bustamante, J; Simpson, R; Urtubia, A; Pinto, M; Teixeira, A

2012-06-01

The processing steps most responsible for yield loss in the manufacture of canned mussel meats are the thermal treatments of precooking to remove meats from shells, and thermal processing (retorting) to render the final canned product commercially sterile for long-term shelf stability. The objective of this study was to investigate and evaluate the impact of different combinations of process variables on the ultimate drained weight in the final mussel product (Mytilu chilensis), while verifying that any differences found were statistically and economically significant. The process variables selected for this study were precooking time, brine salt concentration, and retort temperature. Results indicated 2 combinations of process variables producing the widest difference in final drained weight, designated best combination and worst combination with 35% and 29% yield, respectively. Significance of this difference was determined by employing a Bootstrap methodology, which assumes an empirical distribution of statistical error. A difference of nearly 6 percentage points in total yield was found. This represents a 20% increase in annual sales from the same quantity of raw material, in addition to increase in yield, the conditions for the best process included a retort process time 65% shorter than that for the worst process, this difference in yield could have significant economic impact, important to the mussel canning industry. © 2012 Institute of Food Technologists®

Effect of finite sample dimensions and total scatter acceptance angle on the gamma ray buildup factor

International Nuclear Information System (INIS)

Singh, Sukhpal; Kumar, Ashok; Singh, Charanjeet; Thind, Kulwant Singh; Mudahar, Gurmel S.

2008-01-01

The simultaneous variation of gamma ray buildup factors with absorber thickness (up to 6.5 mfp) and total scatter acceptance angle (which is the sum of incidence and exit beam divergence) in the media of high volume flyash concrete and water was studied experimentally using a point isotropic 137 Cs source

Effect of raw material on physical properties and yield of bio diesel

International Nuclear Information System (INIS)

Malik, S.R.; Khan, J.R.

2008-01-01

Production of bio diesel via trans-esterification method is under investigation as an alternative fuel. The prospects of using crude vegetable oil have not been investigated extensively which may be due to economic reasons. Used and unused vegetable oils have been considered for this purpose and a series of experimental results were reported. This study encircles similar prospect and compares the results. Various samples of refined and crude forms of Canola and Cottonseed Oils were tested. Viscosity, densities. Pour point, cloud point and yield of bio-diesels have been determined which may provide a useful data for further investigations. (author)

Palm-Based Standard Reference Materials for Iodine Value and Slip Melting Point

Directory of Open Access Journals (Sweden)

Azmil Haizam Ahmad Tarmizi

2008-01-01

Full Text Available This work described study protocols on the production of Palm-Based Standard Reference Materials for iodine value and slip melting point. Thirty-three laboratories collaborated in the inter-laboratory proficiency tests for characterization of iodine value, while thirty-two laboratories for characterization of slip melting point. The iodine value and slip melting point of palm oil, palm olein and palm stearin were determined in accordance to MPOB Test Methods p3.2:2004 and p4.2:2004, respectively. The consensus values and their uncertainties were based on the acceptability of statistical agreement of results obtained from collaborating laboratories. The consensus values and uncertainties for iodine values were 52.63 ± 0.14 Wijs in palm oil, 56.77 ± 0.12 Wijs in palm olein and 33.76 ± 0.18 Wijs in palm stearin. For the slip melting points, the consensus values and uncertainties were 35.6 ± 0.3 ° C in palm oil, 22.7 ± 0.4 ° C in palm olein and 53.4 ± 0.2 ° C in palm stearin. Repeatability and reproducibility relative standard deviations were found to be good and acceptable, with values much lower than that of 10%. Stability of Palm-Based Standard Reference Materials remained stable at temperatures of -20 ° C, 0 ° C, 6 ° C and 24 ° C upon storage for one year.

Palm-Based Standard Reference Materials for Iodine Value and Slip Melting Point

Directory of Open Access Journals (Sweden)

Azmil Haizam Ahmad Tarmizi

2008-01-01

Full Text Available This work described study protocols on the production of Palm-Based Standard Reference Materials for iodine value and slip melting point. Thirty-three laboratories collaborated in the inter-laboratory proficiency tests for characterization of iodine value, while thirty-two laboratories for characterization of slip melting point. The iodine value and slip melting point of palm oil, palm olein and palm stearin were determined in accordance to MPOB Test Methods p3.2:2004 and p4.2:2004, respectively. The consensus values and their uncertainties were based on the acceptability of statistical agreement of results obtained from collaborating laboratories. The consensus values and uncertainties for iodine values were 52.63 ± 0.14 Wijs in palm oil, 56.77 ± 0.12 Wijs in palm olein and 33.76 ± 0.18 Wijs in palm stearin. For the slip melting points, the consensus values and uncertainties were 35.6 ± 0.3 °C in palm oil, 22.7 ± 0.4 °C in palm olein and 53.4 ± 0.2 °C in palm stearin. Repeatability and reproducibility relative standard deviations were found to be good and acceptable, with values much lower than that of 10%. Stability of Palm-Based Standard Reference Materials remained stable at temperatures of –20 °C, 0 °C, 6 °C and 24 °C upon storage for one year.

Soybean (Glycine max L. Merr. Yield Gap Analysis using Boundary Line Method in Gorgan and Aliabad Katul

Directory of Open Access Journals (Sweden)

Alireza Nehbandani

2017-12-01

management, this productivity can increase to as high as 5355 Kg.ha-1. Most evaluated soybean yield responses in terms of the value of the nitrogen fertilizer showed that the data points follow a two-segmented function in a way that by increasing the amount of nitrogen fertilizer to 48 Kg.ha-1, the yield increased and then, the addition of the amount of nitrogen fertilizer had no effect on grain yield. Most evaluated soybean yield responses in terms of the amount of phosphorous fertilizer showed that the data points follow a two-segmented function in a way that by increasing the amount of phosphorous fertilizer to 43 kg per hectare, the yield increased and then, the addition of the amount of fertilizer had no effect on grain yield. Most evaluated soybean yield responses in terms of the irrigation frequency showed that the data points follow a two-segmented function in a way that by increasing irrigation frequencies up to four times, the yield increased and then, by increasing the number of irrigations no effect on grain yield has been observed. Data distribution of grain yield against the amount of seed used showed that the boundary line follows dent-like function. Accordingly, to reach a yield potential of 5780 Kg.ha-1, 53 to 67 kg of seeds per hectare is needed. The distribution of yield data against the distance between the rows showed that the boundary line follows a quadratic function. Hence, to reach a yield potential of 4048 Kg.ha-1, a 40 cm rows distance must be considered . Data distribution of grain yield against the inter-crop distance showed that the boundary line follows a dent-like function and inter-crop distance must be kept at a range of 5-7cm to reach a 5102 Kg.ha-1 grain yield. Conclusion In this study by examining several important management factors in growing soybean, optimal requirements of each factor to achieve the highest yield was determined by boundary analysis. In addition, the percentage of farms that had poor management as well as soybean yield

42 CFR 137.138 - Once the Indian Tribe's final offer has been accepted or deemed accepted by operation of law...

Science.gov (United States)

2010-10-01

... accepted or deemed accepted by operation of law, what is the next step? 137.138 Section 137.138 Public... final offer has been accepted or deemed accepted by operation of law, what is the next step? After the... the acceptance or the deemed acceptance. Rejection of Final Offers ...

Induced Temporal Signatures for Point-Source Detection

International Nuclear Information System (INIS)

Stephens, Daniel L.; Runkle, Robert C.; Carlson, Deborah K.; Peurrung, Anthony J.; Seifert, Allen; Wyatt, Cory R.

2005-01-01

Detection of radioactive point-sized sources is inherently divided into two regimes encompassing stationary and moving detectors. The two cases differ in their treatment of background radiation and its influence on detection sensitivity. In the stationary detector case the statistical fluctuation of the background determines the minimum detectable quantity. In the moving detector case the detector may be subjected to widely and irregularly varying background radiation, as a result of geographical and environmental variation. This significant systematic variation, in conjunction with the statistical variation of the background, requires a conservative threshold to be selected to yield the same false-positive rate as the stationary detection case. This results in lost detection sensitivity for real sources. This work focuses on a simple and practical modification of the detector geometry that increase point-source recognition via a distinctive temporal signature. A key part of this effort is the integrated development of both detector geometries that induce a highly distinctive signature for point sources and the development of statistical algorithms able to optimize detection of this signature amidst varying background. The identification of temporal signatures for point sources has been demonstrated and compared with the canonical method showing good results. This work demonstrates that temporal signatures are efficient at increasing point-source discrimination in a moving detector system

Estimating Function Approaches for Spatial Point Processes

Science.gov (United States)

Deng, Chong

Spatial point pattern data consist of locations of events that are often of interest in biological and ecological studies. Such data are commonly viewed as a realization from a stochastic process called spatial point process. To fit a parametric spatial point process model to such data, likelihood-based methods have been widely studied. However, while maximum likelihood estimation is often too computationally intensive for Cox and cluster processes, pairwise likelihood methods such as composite likelihood, Palm likelihood usually suffer from the loss of information due to the ignorance of correlation among pairs. For many types of correlated data other than spatial point processes, when likelihood-based approaches are not desirable, estimating functions have been widely used for model fitting. In this dissertation, we explore the estimating function approaches for fitting spatial point process models. These approaches, which are based on the asymptotic optimal estimating function theories, can be used to incorporate the correlation among data and yield more efficient estimators. We conducted a series of studies to demonstrate that these estmating function approaches are good alternatives to balance the trade-off between computation complexity and estimating efficiency. First, we propose a new estimating procedure that improves the efficiency of pairwise composite likelihood method in estimating clustering parameters. Our approach combines estimating functions derived from pairwise composite likeli-hood estimation and estimating functions that account for correlations among the pairwise contributions. Our method can be used to fit a variety of parametric spatial point process models and can yield more efficient estimators for the clustering parameters than pairwise composite likelihood estimation. We demonstrate its efficacy through a simulation study and an application to the longleaf pine data. Second, we further explore the quasi-likelihood approach on fitting

Effects of different brewing conditions on catechin content and sensory acceptance in Turkish green tea infusions.

Science.gov (United States)

Saklar, Sena; Ertas, Erdal; Ozdemir, Ibrahim S; Karadeniz, Bulent

2015-10-01

The optimal brewing conditions for Turkish green tea were determined on the basis of extracted catechins and sensory attributes. Green tea infusions were prepared at 75, 85 and 95 °C with brewing times of 1, 2, 3, 5, 10, 20, 30 and 45 min. The amounts of epistructured catechins (EGCG, EGC, ECG, EC), non-epistructured catechins (C, GC, GCG) and caffeine in brewed tea samples were analysed. Sensory analyses were performed by nine trained panelists for infusion colour, taste, aroma and overall acceptability. Brewing at 85 °C for 3 min was found to be the optimal condition, where the EGCG content was at a maximum of 50.69 mg/100 ml with the highest sensory scores. It was observed that the yield of epistructured catechins increased rapidly for the first 3-5 min of brewing at 85 °C, and increased brewing time resulted in a decrease in the yield of epistructured catechins. The amount of nonepistructured catechins continued to increase with longer extraction times. Sensory scores for infusion colour, taste, aroma and overall acceptability were highest at 3 and 5 min brewing times at all temperatures. Sensory scores were very low for 30 and 45 min brewing at 85 and 95 °C due to the bitter taste and dark colour.

Willingness-to-accept reductions in HIV risks: conditional economic incentives in Mexico

Science.gov (United States)

Galárraga, Omar; Sosa-Rubí, Sandra G.; Infante, César; Gertler, Paul J.; Bertozzi, Stefano M.

2014-01-01

The objective of this study was to measure willingness-to-accept (WTA) reductions in risks for HIV and other sexually transmitted infections (STI) using conditional economic incentives (CEI) among men who have sex with men (MSM), including male sex workers (MSW) in Mexico City. A survey experiment was conducted with 1,745 MSM and MSW (18-25 years of age) who received incentive offers to decide first whether to accept monthly prevention talks and STI testing; and then a second set of offers to accept to stay free of STIs (verified by quarterly biological testing). The survey used random-starting-point and iterative offers. WTA was estimated with a maximum likelihood double-bounded dichotomous choice model. The average acceptance probabilities were: 73.9% for the monthly model, and 80.4% for the quarterly model. The incentive-elasticity of participation in the monthly model was 0.222, and it was 0.515 in the quarterly model. For a combination program with monthly prevention talks, and staying free of curable STI, the implied WTA was USD$288 per person per year, but it was lower for MSW: USD$156 per person per year. Thus, some of the populations at highest risk of HIV infection (MSM & MSW) seem well disposed to participate in a CEI program for HIV and STI prevention in Mexico. The average willingness-to-accept estimate is within the range of feasible allocations for prevention in the local context. Given the potential impact, Mexico, a leader in conditional cash transfers for human development and poverty reduction, could extend that successful model for targeted HIV/STI prevention. PMID:23377757

Probabilistic relationships in acceptable risk studies

International Nuclear Information System (INIS)

Benjamin, J.R.

1977-01-01

Acceptable risk studies involve uncertainties in future events; consequences and associated values, the acceptability levels, and the future decision environment. Probabilistic procedures afford the basic analytical tool to study the influence of each of these parameters on the acceptable risk decision, including their interrelationships, and combinations. A series of examples are presented in the paper in increasing complexity to illustrate the principles involved and to quantify the relationships to the acceptable risk decision. The basic objective of such studies is to broaden the scientific basis of acceptable risk decision making. It is shown that rationality and consistency in decision making is facilitated by such studies and that rather simple relationships exist in many situations of interest. The variation in criteria associated with an increase in the state of knowledge or change in the level of acceptability is also discussed. (Auth.)

Probabilistic relationships in acceptable risk studies

International Nuclear Information System (INIS)

Benjamin, J.R.

1977-01-01

Acceptable risk studies involve uncertainties in future events: consequences and associated values, the acceptability levels, and the future decision environment. Probabilistic procedures afford the basic analytical tool to study the influence of each of these parameters on the acceptable risk decision, including their interrelationships, and combinations. A series of examples are presented in the paper in increasing complexity to illustrate the principles involved and to quantify the relationships to the acceptable risk decision. The basic objective of such studies is to broaden the scientific basis of acceptable risk decision making. It is shown that rationality and consistency in decision making is facilitated by such studies and that rather simple relationships exist in many situations of interest. The variation in criteria associated with an increase in the state of knowledge or change in the level of acceptability is also discussed

Influence of density on radiation-chemical yield of molecular hydrogen formed at radiolysis of aqueous solution of NaOH

International Nuclear Information System (INIS)

Jafarov, Y.D.; Hajiyeva, S.R.; Ramazanova, N.K.; Aliyev, S.M.; Alasgarov, A.M.

2014-01-01

Full text : In atom and nuclear energy the specialists knowledge about radiation-chemical yield of the initial products formed under the influence of ionizing rays on water is of great importance from the point of security. The radiation-chemical yields of molecular hydrogen have been defined according to the graph and the obtained results

Technology, Demographic Characteristics and E-Learning Acceptance: A Conceptual Model Based on Extended Technology Acceptance Model

Science.gov (United States)

Tarhini, Ali; Elyas, Tariq; Akour, Mohammad Ali; Al-Salti, Zahran

2016-01-01

The main aim of this paper is to develop an amalgamated conceptual model of technology acceptance that explains how individual, social, cultural and organizational factors affect the students' acceptance and usage behaviour of the Web-based learning systems. More specifically, the proposed model extends the Technology Acceptance Model (TAM) to…

Investigating Students' Acceptance of a Statistics Learning Platform Using Technology Acceptance Model

Science.gov (United States)

Song, Yanjie; Kong, Siu-Cheung

2017-01-01

The study aims at investigating university students' acceptance of a statistics learning platform to support the learning of statistics in a blended learning context. Three kinds of digital resources, which are simulations, online videos, and online quizzes, were provided on the platform. Premised on the technology acceptance model, we adopted a…

Bond yield curve construction

Directory of Open Access Journals (Sweden)

Kožul Nataša

2014-01-01

Full Text Available In the broadest sense, yield curve indicates the market's view of the evolution of interest rates over time. However, given that cost of borrowing it closely linked to creditworthiness (ability to repay, different yield curves will apply to different currencies, market sectors, or even individual issuers. As government borrowing is indicative of interest rate levels available to other market players in a particular country, and considering that bond issuance still remains the dominant form of sovereign debt, this paper describes yield curve construction using bonds. The relationship between zero-coupon yield, par yield and yield to maturity is given and their usage in determining curve discount factors is described. Their usage in deriving forward rates and pricing related derivative instruments is also discussed.

American acceptance of nuclear power

International Nuclear Information System (INIS)

Barrett, W.

1980-01-01

The characteristic adventurous spirit that built American technology will eventually lead to American acceptance of nuclear power unless an overpowering loss of nerve causes us to reject both nuclear technology and world leadership. The acceptance of new technology by society has always been accompanied by activist opposition to industralization. To resolve the debate between environmental and exploitive extremists, we must accept with humility the basic premise that human accomplishment is a finite part of nature

Tacit acceptance of the succession

Directory of Open Access Journals (Sweden)

Ioana NICOLAE

2012-01-01

Full Text Available This paper examines some essential and contradictory aspects regarding the issue of tacit acceptance of succession in terms of distinction between documents valuing tacit acceptance of succession and other acts that would not justify such a solution. The documents expressly indicated by the legislator as having tacit acceptance value as well as those which do not have such value are presented and their most important legal effects are examined and discussed.

Approaches to acceptable risk

International Nuclear Information System (INIS)

Whipple, C.

1997-01-01

Several alternative approaches to address the question open-quotes How safe is safe enough?close quotes are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, in a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made

7755 EFFECT OF NPK FERTILIZER ON FRUIT YIELD AND YIELD ...

African Journals Online (AJOL)

Win7Ent

2013-06-03

Jun 3, 2013 ... peasant farmers in Nigeria. With the increased ... did not significantly (p=0.05) increase the fruit yield nor the seed yield. Key words: NPK fertilizer, Fruit ..... SAS (Statistical Analysis System) Version 9.1. SAS Institute Inc., Cary, ...

Self-acceptance of stuttering: A preliminary study.

Science.gov (United States)

De Nardo, Thales; Gabel, Rodney M; Tetnowski, John A; Swartz, Eric R

2016-01-01

This study explored the relationship between self-acceptance of stuttering and (1) psychosocial factors (self-esteem, hostility towards others, emotional support, and perceived discrimination); (2) treatment history (support group participation, therapy duration, and perceived therapy success); and (3) previously reported variables in self-acceptance of stuttering, which include age and stuttering severity. Participants were 80 adults who stutter who were recruited with assistance from the National Stuttering Association and Board Certified Specialists in Fluency Disorders. Participants completed an electronic survey composed of an acceptance of stuttering scale, psychosocial scales, and a participant information questionnaire. Statistical analysis identified significant correlations between participants' reports of self-acceptance of stuttering and self-esteem, perceived discrimination, hostility towards others, and perceived therapy outcome. Self-esteem was positively correlated with self-acceptance, while hostility towards others and perceived discrimination was negatively correlated with self-acceptance. Participants who perceived their therapy outcome to be successful were significantly more likely to report higher levels of self-acceptance. No significant relationships were found between self-acceptance of stuttering and support group participation, emotional support, stuttering severity, and participant age. This exploratory investigation has provided a foundation for future studies on the self-acceptance of stuttering. The findings indicate common psychosocial variables in self-acceptance of stuttering and of other disabilities. The significant relationships between self-acceptance of stuttering and psychosocial and therapeutic variables found need to be further explored to identify its causalities and clinical implications. The reader will be able to (1) discuss the importance of assessing self-acceptance of stuttering, (2) summarize the literature on self-acceptance

Clinical Observation on Intractable Insomnia Treated by Point Pressure in 42 Cases

Institute of Scientific and Technical Information of China (English)

张庆萍

2002-01-01

@@ The author have in recent years treated 42 cases of intractable insomnia (with a history of over 2 years) by point pressure, yielding quite satisfactory results when compared with those treated with clonazepam. This is reported as follows.

Yield and Yield Components of Safflower (Carthamus tinctorius L. as Affected by Micronutrient Application and Vermicompost in Two Kerman and Bardsir Regions

Directory of Open Access Journals (Sweden)

Alireza Karimi Gogheri

2017-10-01

Full Text Available Introduction Despite the importance of oily crops in development of Iran, there are few studies on nutrition with micronutrient in these crops, especially for safflower. Safflower, a deep rooted oilseed crop, is grown in many areas of world because it can be used as oil crop, vegetable, birdfeed and spices. To achieve the acceptable growth and yield of safflower, it needs the sufficient micro- and macronutrient, so that recently, there has been an increased interest in evaluation of nutrient role in quality and quantity of safflower. Application of vermicompost in oil crop production systems of Iran has been increased; which it can improve soil structure by increasing aggregate stability as well as increase in water holding capacity and aeration. On the other hand, micronutrients are nutrients required by plants in small quantities to organize a range of physiological functions. The deficiency micronutrients is widespread in many parts of the country due to cultivation of high yielding varieties, intensive agriculture and increasing use of sulphur free fertilizers in large quantities with concomitant decrease in use of organic manures. There is little information on interaction of vermicompost and micronutrients combination on safflower. thus, this study was conducted to evaluate the effect of combinations of three important micronutrient consisted of sulphur, zinc and boron on yield and yield components as well as dry forage production of safflower in different vermicompost treatments. Material and Methods In this research, the effect of micronutrient application and vermicompost was examined on yield and yield components of safflower in Agriculture and Natural Resources Research Center of Kerman Province in two Kerman and Bardsir regions. The treatments were included vermicompost factor at two levels (0 and 6 t ha-1 and micronutrients combinations at 12 levels (no use, 100 kg ha-1 S, 200 kg ha-1 S, 3 ml L-1 Zn, 2 ml L-1 B, four twofold and two

Differentiated influences of risk perceptions on nuclear power acceptance according to acceptance targets: Evidence from Korea

International Nuclear Information System (INIS)

Roh, Seung Kook; Lee, Jin Won

2017-01-01

The determinants of the public's nuclear power acceptance have received considerable attention as decisive factors regarding nuclear power policy. However, the contingency of the relative importance of different determinants has been less explored. Building on the literature of psychological distance between the individual and the object, the present study demonstrates that the relative effects of different types of perceived risks regarding nuclear power generation differ across acceptance targets. Using a sample of Korea, our results show that, regarding national acceptance of nuclear power generation, perceived risk from nuclear power plants exerts a stronger negative effect than that from radioactive waste management; however, the latter exerts a stronger negative effect than the former on local acceptance of a nuclear power plant. This finding provides implications for efficient public communication strategy to raise nuclear power acceptance

Older Adults' Acceptance of Information Technology

Science.gov (United States)

Wang, Lin; Rau, Pei-Luen Patrick; Salvendy, Gavriel

2011-01-01

This study investigated variables contributing to older adults' information technology acceptance through a survey, which was used to find factors explaining and predicting older adults' information technology acceptance behaviors. Four factors, including needs satisfaction, perceived usability, support availability, and public acceptance, were…

The shooting method and multiple solutions of two/multi-point BVPs of second-order ODE

Directory of Open Access Journals (Sweden)

Man Kam Kwong

2006-06-01

Full Text Available Within the last decade, there has been growing interest in the study of multiple solutions of two- and multi-point boundary value problems of nonlinear ordinary differential equations as fixed points of a cone mapping. Undeniably many good results have emerged. The purpose of this paper is to point out that, in the special case of second-order equations, the shooting method can be an effective tool, sometimes yielding better results than those obtainable via fixed point techniques.

Response of Yield and Yield Components of Tef [Eragrostis Tef ...

African Journals Online (AJOL)

The partial budget analysis also indicates that applications of 46 kg. N ha-1 and 10 kg P ha-1 are ..... (1994) indicated that where the grain yield response is negative, yield reduction is primarily caused by a .... An Economic Training. Manual.

Acceptance and Impact of Point-of-Use Water Filtration Systems in Rural Guatemala.

Science.gov (United States)

Larson, Kim L; Hansen, Corrie; Ritz, Michala; Carreño, Diego

2017-01-01

Infants and children in developing countries bear the burden of diarrheal disease. Diarrheal disease is linked to unsafe drinking water and can result in serious long-term consequences, such as impaired immune function and brain growth. There is evidence that point-of-use water filtration systems reduce the prevalence of diarrhea in developing countries. In the summer of 2014, following community forums and interactive workshops, water filters were distributed to 71 households in a rural Maya community in Guatemala. The purpose of this study was to evaluate the uptake of tabletop water filtration systems to reduce diarrheal diseases. A descriptive correlational study was used that employed community partnership and empowerment strategies. One year postintervention, in the summer of 2015, a bilingual, interdisciplinary research team conducted a house-to-house survey with families who received water filters. Survey data were gathered from the head of household on family demographics, current family health, water filter usage, and type of flooring in the home. Interviews were conducted in Spanish and in partnership with a village leader. Each family received a food package of household staples for their participation. Descriptive statistics were calculated for all responses. Fisher's exact test and odds ratios were used to determine relationships between variables. Seventy-nine percent (n = 56) of the 71 households that received a water filter in 2014 participated in the study. The majority of families (71.4%; n = 40) were using the water filters and 16 families (28.6%) had broken water filters. Of the families with working water filters, 15% reported diarrhea, while 31% of families with a broken water filter reported diarrhea. Only 55.4% of the homes had concrete flooring. More households with dirt flooring and broken water filters reported a current case of diarrhea. A record review of attendees at an outreach clinic in this village noted a decrease in intestinal

Monitoring device acceptance in implantable cardioverter defibrillator patients using the Florida Patient Acceptance Survey

DEFF Research Database (Denmark)

Versteeg, Henneke; Starrenburg, Annemieke; Denollet, Johan

2012-01-01

Patient device acceptance might be essential in identifying patients at risk for adverse patient-reported outcomes following implantation of an implantable cardioverter defibrillator (ICD). We examined the validity and reliability of the Florida Patient Acceptance Scale (FPAS) and identified corr...

Social acceptance for seismic safety of nuclear installations

International Nuclear Information System (INIS)

Oiso, Shinichi

2010-01-01

The social acceptance of seismic safety of the nuclear installations was considered based on the situation that people's concern and anxieties for it having risen by earthquake suffering of the Kashiwazaki Kariwa facility in 2007, etc. It aimed mainly to extract a social awareness (acknowledgment and evaluation) which is peculiar to the earthquake in the field of nuclear power generation, and to show the attention point concerning the public relations of seismic safety of the nuclear power plant. As a result, it was suggested that we should explain based on the opinion of the third party which has a high trust such as specialist scholars, and emphasize that the severe examinations of outside third parties such as committee of the prefecture are conducted. (author)

Wind power: basic challenge concerning social acceptance

NARCIS (Netherlands)

Wolsink, M.; Meyers, R.A.

2012-01-01

This reference article gives an overview of social acceptance (acceptance by all relevant actors in society) of all relevant aspects of implementation and diffusion of wind power. In social acceptance three dimensions of acceptance are distinguished (socio-political -; community -; market

Agents of Law: Psychoanalytic Perspective on Parenthood Practices as Socially Accepted Violence.

Science.gov (United States)

Even-Tzur, Efrat; Hadar, Uri

2017-02-01

This paper presents a theoretical model of parental authority from the vantage point of parental subjecthood, using a roughly Lacanian formulation of what it means to take a (parental) subject position. For Freud, the parental role involves the acceptance of social rules that may, at times, involve a socially acceptable degree of violence. Nevertheless, psychoanalytic discussions have disregarded the parents' subjective experience as agents of the Law and purveyors of threatening authority. The authors elaborate on Freud's and Lacan's ideas and delineate several prime types of parental identifications as agents of Law. The Lacanian theoretical constructs expanded in this discussion include two basic parental positions of authority, termed the Symbolic Father and the Imaginary Father, and one derivative position, called the Perverse Father, which are demonstrated through the story of Dr. Moritz Schreber. The paper discusses how these theoretical constructs bear upon the philosophical conceptualizations of law, violence, and legitimacy.

PAGs - Public perception and acceptance

International Nuclear Information System (INIS)

Quillin, Robert M.

1989-01-01

Full text: While Protective Action Guides or PAGs have been a part of the lexicon of the radiation protection field for several decades, the concept of accepting higher levels of risk under certain situations has not received adequate scrutiny by the general public, the media or elected officials. Consequently there is a question as to how implementation of PAGs would be perceived by the above groups in the event that such implementation became necessary. A personal case in point involves the response of an executive in the food industry. When the concept of selling a food product meeting the PAGs was explained his response was, 'we won't sell a contaminated product, we would dump the unprocessed raw food. Our industry image is that of a natural unadulterated food'. While this may be an isolated view, there is a need to determine what is the perception and consequently what would be the response if PAGs were implemented today. If the response was negative by anyone of the three groups listed previously, then there is an obvious need for a program to assure receptiveness by those concerned. However, this may face formidable obstacles. This is because the terms radiation and radioactive have gained generally negative word associations, e.g. 'deadly' radiation and radioactive 'desert'. The former term was recently heard in a taped presentation at a Museum of Natural History on a completely unrelated subject. The latter term was part of a recent article heading in the Wall Street Journal. Incidentally the article was discussing television. Thus beyond the scientific issues of setting PAGs and the administrative and procedural issues of implementing PAGs there is the issue of society's understanding and acceptance of PAGs. Particularly, how can such understanding and acceptance be achieved in a situation which is associated with an actual or perceived radiation emergency? These are not questions that radiation or agricultural scientists can answer alone. These are

Implications of a visco-elastic model of the lithosphere for calculating yield strength envelopes

NARCIS (Netherlands)

Ershov, A.V.; Stephenson, R.A.

2006-01-01

The dominant deformation mechanism in the ductile part of the lithosphere is creep. From a mechanical point of view, creep can be modelled as a viscous phenomenon. On the other hand, yield-strength envelopes (YSEs), commonly used to describe lithosphere rheology, are constructed supposing creep to

A point-to-point simple telehealth application for cardiovascular prevention: the ESINO LARIO experience. Cardiovascular prevention at point of care.

Science.gov (United States)

Malacarne, Mara; Gobbi, Giorgio; Pizzinelli, Paolo; Lesma, Alessandro; Castelli, Alberto; Lucini, Daniela; Pagani, Massimo

2009-01-01

Recent epidemiological evidence indicates that chronic degenerative diseases, notably cardiovascular, represent the major toll in terms of death and of impaired quality of life. Recent estimates indicate that a small increase in financial resources in a number of clinical cases may be sufficient to minimize the consequences of elevated cardiovascular risk per individual. The observation that lifestyle choices, and in particular increased physical exercise, might strongly impact cardiovascular risk, suggests a redesign of preventive strategies, based on the combination of pharmacological and behavioral interventions. Following our recent experience with the INteractive teleConsultation network for worldwide healthcAre Services (INCAS) system, we designed a simpler point-to-point telehealth infrastructure, to be employed in cardiovascular risk reduction programs, predicting a high level of acceptance from the population, at the cost of very limited investment. This model was tested on 181 subjects (ages 18-80 years) in the Italian mountain village of Esino Lario. These subjects underwent a screening test to evaluate arrhythmia and cardiometabolic risks (arrhythmias were found in 14% of subjects, systolic arterial pressure was observed in 43% of subjects above 140 mm Hg, diastolic arterial pressure in 31% above 90 mm Hg). This study demonstrates the feasibility of a scaled-down telehealth application particularly suited to cardiovascular prevention in remote areas, such as in mountain villages.

Correlation and path-cofficient analysis of seed yield and yield ...

African Journals Online (AJOL)

This study was undertaken in order to determine the association among yield components and their direct and indirect effects on the seed yield of confectionery sunflower. 36 confectionery sunflower populations originated from different regions of Northwest Iran were characterized using 11 agromorphological traits ...

A survey for low stau yields in the MSSM

International Nuclear Information System (INIS)

Heisig, Jan; Kersten, Jörn; Panes, Boris; Robens, Tania

2014-01-01

We study the implications of LHC results for the abundance of long-lived staus after freeze-out from thermal equilibrium in a super-WIMP dark matter scenario. We classify regions in the MSSM parameter space according to the stau yield, considering all possible co-annihilation effects as well as the effects of resonances and large Higgs-sfermion couplings. Afterwards, we examine the viability of these regions after imposing experimental and theoretical constraints, in particular a Higgs mass around 125 GeV and null-searches for heavy stable charged particles (HSCP) at the LHC. We work in a pMSSM framework and perform a Monte Carlo scan over the parameter space. To interpret the HSCP searches in our scenario, we consider all potentially important superparticle production processes, developing a fast estimator for NLO cross sections for electroweak and strong production at the LHC. After applying all constraints, we find that stau yields below 10 −14 occur only for resonant annihilation via a heavy Higgs in combination with either co-annihilation or large left-right stau mixing. We encounter allowed points with yields as low as 2×10 −16 , thus satisfying limits from big bang nucleosynthesis even for large stau lifetimes

Iterative closest normal point for 3D face recognition.

Science.gov (United States)

Mohammadzade, Hoda; Hatzinakos, Dimitrios

2013-02-01

The common approach for 3D face recognition is to register a probe face to each of the gallery faces and then calculate the sum of the distances between their points. This approach is computationally expensive and sensitive to facial expression variation. In this paper, we introduce the iterative closest normal point method for finding the corresponding points between a generic reference face and every input face. The proposed correspondence finding method samples a set of points for each face, denoted as the closest normal points. These points are effectively aligned across all faces, enabling effective application of discriminant analysis methods for 3D face recognition. As a result, the expression variation problem is addressed by minimizing the within-class variability of the face samples while maximizing the between-class variability. As an important conclusion, we show that the surface normal vectors of the face at the sampled points contain more discriminatory information than the coordinates of the points. We have performed comprehensive experiments on the Face Recognition Grand Challenge database, which is presently the largest available 3D face database. We have achieved verification rates of 99.6 and 99.2 percent at a false acceptance rate of 0.1 percent for the all versus all and ROC III experiments, respectively, which, to the best of our knowledge, have seven and four times less error rates, respectively, compared to the best existing methods on this database.

Differentiated influences of risk perceptions on nuclear power acceptance according to acceptance targets: Evidence from Korea

Directory of Open Access Journals (Sweden)

Seungkook Roh

2017-08-01

Full Text Available The determinants of the public's nuclear power acceptance have received considerable attention as decisive factors regarding nuclear power policy. However, the contingency of the relative importance of different determinants has been less explored. Building on the literature of psychological distance between the individual and the object, the present study demonstrates that the relative effects of different types of perceived risks regarding nuclear power generation differ across acceptance targets. Using a sample of Korea, our results show that, regarding national acceptance of nuclear power generation, perceived risk from nuclear power plants exerts a stronger negative effect than that from radioactive waste management; however, the latter exerts a stronger negative effect than the former on local acceptance of a nuclear power plant. This finding provides implications for efficient public communication strategy to raise nuclear power acceptance.

Differentiated influences of risk perceptions on nuclear power acceptance according to acceptance targets: Evidence from Korea

Energy Technology Data Exchange (ETDEWEB)

Roh, Seung Kook [Policy Research Center, Korea Atomic Energy Research Institute (KAERI), Daejeon (Korea, Republic of); Lee, Jin Won [School of Management, Xiamen University, Xiamen (China)

2017-08-15

The determinants of the public's nuclear power acceptance have received considerable attention as decisive factors regarding nuclear power policy. However, the contingency of the relative importance of different determinants has been less explored. Building on the literature of psychological distance between the individual and the object, the present study demonstrates that the relative effects of different types of perceived risks regarding nuclear power generation differ across acceptance targets. Using a sample of Korea, our results show that, regarding national acceptance of nuclear power generation, perceived risk from nuclear power plants exerts a stronger negative effect than that from radioactive waste management; however, the latter exerts a stronger negative effect than the former on local acceptance of a nuclear power plant. This finding provides implications for efficient public communication strategy to raise nuclear power acceptance.

Soviet test yields

Science.gov (United States)

Vergino, Eileen S.

Soviet seismologists have published descriptions of 96 nuclear explosions conducted from 1961 through 1972 at the Semipalatinsk test site, in Kazakhstan, central Asia [Bocharov et al., 1989]. With the exception of releasing news about some of their peaceful nuclear explosions (PNEs) the Soviets have never before published such a body of information.To estimate the seismic yield of a nuclear explosion it is necessary to obtain a calibrated magnitude-yield relationship based on events with known yields and with a consistent set of seismic magnitudes. U.S. estimation of Soviet test yields has been done through application of relationships to the Soviet sites based on the U.S. experience at the Nevada Test Site (NTS), making some correction for differences due to attenuation and near-source coupling of seismic waves.

An evaluation of the lamb vision system as a predictor of lamb carcass red meat yield percentage.

Science.gov (United States)

Brady, A S; Belk, K E; LeValley, S B; Dalsted, N L; Scanga, J A; Tatum, J D; Smith, G C

2003-06-01

An objective method for predicting red meat yield in lamb carcasses is needed to accurately assess true carcass value. This study was performed to evaluate the ability of the lamb vision system (LVS; Research Management Systems USA, Fort Collins, CO) to predict fabrication yields of lamb carcasses. Lamb carcasses (n = 246) were evaluated using LVS and hot carcass weight (HCW), as well as by USDA expert and on-line graders, before fabrication of carcass sides to either bone-in or boneless cuts. On-line whole number, expert whole-number, and expert nearest-tenth USDA yield grades and LVS + HCW estimates accounted for 53, 52, 58, and 60%, respectively, of the observed variability in boneless, saleable meat yields, and accounted for 56, 57, 62, and 62%, respectively, of the variation in bone-in, saleable meat yields. The LVS + HCW system predicted 77, 65, 70, and 87% of the variation in weights of boneless shoulders, racks, loins, and legs, respectively, and 85, 72, 75, and 86% of the variation in weights of bone-in shoulders, racks, loins, and legs, respectively. Addition of longissimus muscle area (REA), adjusted fat thickness (AFT), or both REA and AFT to LVS + HCW models resulted in improved prediction of boneless saleable meat yields by 5, 3, and 5 percentage points, respectively. Bone-in, saleable meat yield estimations were improved in predictive accuracy by 7.7, 6.6, and 10.1 percentage points, and in precision, when REA alone, AFT alone, or both REA and AFT, respectively, were added to the LVS + HCW output models. Use of LVS + HCW to predict boneless red meat yields of lamb carcasses was more accurate than use of current on-line whole-number, expert whole-number, or expert nearest-tenth USDA yield grades. Thus, LVS + HCW output, when used alone or in combination with AFT and/or REA, improved on-line estimation of boneless cut yields from lamb carcasses. The ability of LVS + HCW to predict yields of wholesale cuts suggests that LVS could be used as an objective

Nonlinear consider covariance analysis using a sigma-point filter formulation

Science.gov (United States)

Lisano, Michael E.

2006-01-01

The research reported here extends the mathematical formulation of nonlinear, sigma-point estimators to enable consider covariance analysis for dynamical systems. This paper presents a novel sigma-point consider filter algorithm, for consider-parameterized nonlinear estimation, following the unscented Kalman filter (UKF) variation on the sigma-point filter formulation, which requires no partial derivatives of dynamics models or measurement models with respect to the parameter list. It is shown that, consistent with the attributes of sigma-point estimators, a consider-parameterized sigma-point estimator can be developed entirely without requiring the derivation of any partial-derivative matrices related to the dynamical system, the measurements, or the considered parameters, which appears to be an advantage over the formulation of a linear-theory sequential consider estimator. It is also demonstrated that a consider covariance analysis performed with this 'partial-derivative-free' formulation yields equivalent results to the linear-theory consider filter, for purely linear problems.

The Adaptation of Acceptance of Couple Violence Scale into Turkish: Validity and Reliability Studies

Directory of Open Access Journals (Sweden)

Özcan SEZER

2008-01-01

Full Text Available This study investigates the validity and reliability of the Turkish adaptation ofAcceptance of Couple Violence Scale (ACVS. The data of research has been attainedfrom 474 (M =243, F=231 high school students who were attending 1st, 2nd and 3thclass and coming from middle socio-economic levels in Malatya. Acceptance of CoupleViolence Scale has 11 items, Likert type and 4 point response format. The constructvalidity of ACVS was conducted by using exploratory factor analysis and varimaxrotation. Single independent factor with the eigenvalue over 1.00 has been found. Thisfactor explained 44% of total variance. To test concurrent validity, correlations betweenscores on ACVS and Aggressiveness Questionnaire were calculated. There was asignificant relationship between scores on the two scales (r= .61. Cronbach alphacoefficient of the scale was found “.87”; test-retest correlation coefficient was “r=.80”.Item-total correlation co-efficiencies vary between “.52” and “.71”. Findings show thatACVS can be used with acceptable level of validity and reliability for high schoolstudents.

46 CFR 28.73 - Accepted organizations.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Accepted organizations. 28.73 Section 28.73 Shipping... INDUSTRY VESSELS General Provisions § 28.73 Accepted organizations. An organization desiring to be designated by the Commandant as an accepted organization must request such designation in writing. As a...

Acceptance of nuclear energy in developed countries

International Nuclear Information System (INIS)

Sobajima, Makoto

1999-03-01

This paper focuses on the presence of problems, governmental efforts and the state of each people's awareness in accepting nuclear energy especially in developed countries and reviews the past circumstances and recent activities. Significant differences among countries in the popularity of nuclear power depend largely on the environment of the particular country such as energy circumstances and also on the execution of the energy policy. Also it is pointed out that the difference comes from the consciousness of the execution of the people in such a policy they establish and decide whether they accept or not. The analysis, that the French people traditionally believe they cannot control risks and give high degree of trust to their government and specialists, whereas Americans conversely intervene in administration to control risks by themselves and try to change specialist's Judgment, explains one side of polarization in popularity of nuclear energy in the world. Japanese have tended to not to believe the administration probably due to recent continuous scandals of officials and motivation to require disclosure of information and to dispute, which lays on the background of retard of nuclear energy. For resolving the global issues such as warming, it is becoming more important that at least specialists of nuclear technology recover the loosing trust owing to the accidents and scandals through steady activities, show the whole view of trust worthy development plan of nuclear energy and regain the confidence by the people. (author)

Biodiesel Production from Vegetable Oil over Plasma Reactor: Optimization of Biodiesel Yield using Response Surface Methodology

Directory of Open Access Journals (Sweden)

Bambang Tri Nugroho

2009-06-01

Full Text Available Biodiesel production has received considerable attention in the recent past as a renewable fuel. The production of biodiesel by conventional transesterification process employs alkali or acid catalyst and has been industrially accepted for its high conversion and reaction rates. However for alkali catalyst, there may be risk of free acid or water contamination and soap formation is likely to take place which makes the separation process difficult. Although yield is high, the acids, being corrosive, may cause damage to the equipment and the reaction rate was also observed to be low. This research focuses on empirical modeling and optimization for the biodiesel production over plasma reactor. The plasma reactor technology is more promising than the conventional catalytic processes due to the reducing reaction time and easy in product separation. Copyright (c 2009 by BCREC. All Rights reserved.[Received: 10 August 2009, Revised: 5 September 2009, Accepted: 12 October 2009][How to Cite: I. Istadi, D.D. Anggoro, P. Marwoto, S. Suherman, B.T. Nugroho (2009. Biodiesel Production from Vegetable Oil over Plasma Reactor: Optimization of Biodiesel Yield using Response Surface Methodology. Bulletin of Chemical Reaction Engineering and Catalysis, 4(1: 23-31. doi:10.9767/bcrec.4.1.23.23-31][How to Link/ DOI: http://dx.doi.org/10.9767/bcrec.4.1.23.23-31

An Empirical Assessment of a Technology Acceptance Model for Apps in Medical Education.

Science.gov (United States)

Briz-Ponce, Laura; García-Peñalvo, Francisco José

2015-11-01

The evolution and the growth of mobile applications ("apps") in our society is a reality. This general trend is still upward and the app use has also penetrated the medical education community. However, there is a lot of unawareness of the students' and professionals' point of view about introducing "apps" within Medical School curriculum. The aim of this research is to design, implement and verify that the Technology Acceptance Model (TAM) can be employed to measure and explain the acceptance of mobile technology and "apps" within Medical Education. The methodology was based on a survey distributed to students and medical professionals from University of Salamanca. This model explains 46.7% of behavioral intention to use mobile devise or "apps" for learning and will help us to justify and understand the current situation of introducing "apps" into the Medical School curriculum.

Robust and efficient handling of yield surface discontinuities in elasto-plastic finite element calculations

DEFF Research Database (Denmark)

Clausen, Johan Christian; Damkilde, Lars; Andersen, Lars Vabbersgaard

2015-01-01

Purpose – The purpose of this paper is to present several methods on how to deal with yield surface discontinuities. The explicit formulations, first presented by Koiter (1953), result in multisingular constitutive matrices which can cause numerical problems in elasto-plastic finite element...... documented in the literature all present “easy” calculation examples, e.g. low friction angles and few elements. The amendments presented in this paper result in robust elasto-plastic computations, making the solution of “hard” problems possible without introducing approximations in the yield surfaces...... calculations. These problems, however, are not documented in previous literature. In this paper an amendment to the Koiter formulation of the constitutive matrices for stress points located on discontinuities is proposed. Design/methodology/approach – First, a review of existing methods of handling yield...

Compression of freestanding gold nanostructures: from stochastic yield to predictable flow

International Nuclear Information System (INIS)

Mook, W M; Niederberger, C; Bechelany, M; Philippe, L; Michler, J

2010-01-01

Characterizing the mechanical response of isolated nanostructures is vitally important to fields such as microelectromechanical systems (MEMS) where the behaviour of nanoscale contacts can in large part determine system reliability and lifetime. To address this challenge directly, single crystal gold nanodots are compressed inside a high resolution scanning electron microscope (SEM) using a nanoindenter equipped with a flat punch tip. These structures load elastically, and then yield in a stochastic manner, at loads ranging from 16 to 110 μN, which is up to five times higher than the load necessary for flow after yield. Yielding is immediately followed by displacement bursts equivalent to 1-50% of the initial height, depending on the yield point. During the largest displacement bursts, strain energy within the structure is released while new surface area is created in the form of localized slip bands, which are evident in both the SEM movies and still-images. A first order estimate of the apparent energy release rate, in terms of fracture mechanics concepts, for bursts representing 5-50% of the structure's initial height is on the order of 10-100 J m -2 , which is approximately two orders of magnitude lower than bulk values. Once this initial strain burst during yielding has occurred, the structures flow in a ductile way. The implications of this behaviour, which is analogous to a brittle to ductile transition, are discussed with respect to mechanical reliability at the micro- and nanoscales.

Effects of phosphorus and zinc applications on the yields and yields ...

African Journals Online (AJOL)

Effects of phosphorus and zinc applications on the yields and yields components of sole early maturing maize ( Zea mays ) and bambaranut ( Vigna subterranean Thour. ) and in intercrop under southern guinea savannah ecology zone.

A microwave resonance dew-point hygrometer

Science.gov (United States)

Underwood, R. J.; Cuccaro, R.; Bell, S.; Gavioso, R. M.; Madonna Ripa, D.; Stevens, M.; de Podesta, M.

2012-08-01

We report the first measurements of a quasi-spherical microwave resonator used as a dew-point hygrometer. In conventional dew-point hygrometers, the condensation of water from humid gas flowing over a mirror is detected optically, and the mirror surface is then temperature-controlled to yield a stable condensed layer. In our experiments we flowed moist air from a humidity generator through a quasi-spherical resonator and detected the onset of condensation by measuring the frequency ratio of selected microwave modes. We verified the basic operation of the device over the dew-point range 9.5-13.5 °C by comparison with calibrated chilled-mirror hygrometers. These tests indicate that the microwave method may allow a quantitative estimation of the volume and thickness of the water layer which is condensed on the inner surface of the resonator. The experiments reported here are preliminary due to the limited time available for the work, but show the potential of the method for detecting not only water but a variety of other liquid or solid condensates. The robust all-metal construction should make the device appropriate for use in industrial applications over a wide range of temperatures and pressures.

A microwave resonance dew-point hygrometer

International Nuclear Information System (INIS)

Underwood, R J; Bell, S; Stevens, M; De Podesta, M; Cuccaro, R; Gavioso, R M; Ripa, D Madonna

2012-01-01

We report the first measurements of a quasi-spherical microwave resonator used as a dew-point hygrometer. In conventional dew-point hygrometers, the condensation of water from humid gas flowing over a mirror is detected optically, and the mirror surface is then temperature-controlled to yield a stable condensed layer. In our experiments we flowed moist air from a humidity generator through a quasi-spherical resonator and detected the onset of condensation by measuring the frequency ratio of selected microwave modes. We verified the basic operation of the device over the dew-point range 9.5–13.5 °C by comparison with calibrated chilled-mirror hygrometers. These tests indicate that the microwave method may allow a quantitative estimation of the volume and thickness of the water layer which is condensed on the inner surface of the resonator. The experiments reported here are preliminary due to the limited time available for the work, but show the potential of the method for detecting not only water but a variety of other liquid or solid condensates. The robust all-metal construction should make the device appropriate for use in industrial applications over a wide range of temperatures and pressures. (paper)

Yield strength of attached copper film

International Nuclear Information System (INIS)

Zhang Yan; Zhang Jian-Min

2011-01-01

Variation of stress in attached copper film with an applied strain is measured by X-ray diffraction combined with a four-point bending method. A lower slope of the initial elastic segment of the curve of X-ray measured stress versus applied strain results from incomplete elastic strain transferred from the substrate to the film due to insufficiently strong interface cohesion. So the slope of the initial elastic segment of the X-ray stress (or X-ray strain directly) of the film against the substrate applied strain may be used to measure the film-substrate cohesive strength. The yield strength of the attached copper film is much higher than that of the bulk material and varies linearly with the inverse of the film thickness. (condensed matter: structural, mechanical, and thermal properties)

Credit in Acceptance Sampling on Attributes

NARCIS (Netherlands)

Klaassen, Chris A.J.

2000-01-01

Credit is introduced in acceptance sampling on attributes and a Credit Based Acceptance sampling system is developed that is very easy to apply in practice.The credit of a producer is defined as the total number of items accepted since the last rejection.In our sampling system the sample size for a

6 Grain Yield

African Journals Online (AJOL)

create a favourable environment for rice ... developing lines adaptable to many ... have stable, not too short crop duration with ..... Analysis of variance of the effect of site and season on maturity, grain yield and plant ..... and yield components.

A deterministic algorithm for fitting a step function to a weighted point-set

KAUST Repository

Fournier, Hervé

2013-02-01

Given a set of n points in the plane, each point having a positive weight, and an integer k>0, we present an optimal O(nlogn)-time deterministic algorithm to compute a step function with k steps that minimizes the maximum weighted vertical distance to the input points. It matches the expected time bound of the best known randomized algorithm for this problem. Our approach relies on Coles improved parametric searching technique. As a direct application, our result yields the first O(nlogn)-time algorithm for computing a k-center of a set of n weighted points on the real line. © 2012 Elsevier B.V.

12 CFR 412.7 - Conditions for acceptance.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Conditions for acceptance. 412.7 Section 412.7 Banks and Banking EXPORT-IMPORT BANK OF THE UNITED STATES ACCEPTANCE OF PAYMENT FROM A NON-FEDERAL SOURCE FOR TRAVEL EXPENSES § 412.7 Conditions for acceptance. (a) Eximbank may accept payment for...

Consumer acceptance of functional foods

DEFF Research Database (Denmark)

Frewer, Lynn J.; Scholderer, Joachim; Lambert, Nigel

2003-01-01

In the past, it has been assumed that consumers would accept novel foods if there is a concrete and tangible consumer benefit associated with them, which implies that those functional foods would quickly be accepted. However, there is evidence that individuals are likely to differ in the extent...... to which they are likely to buy products with particular functional properties. Various cross-cultural and demographic differences in acceptance found in the literature are reviewed, as well as barriers to dietary change. In conclusion, it is argued that understanding consumer's risk perceptions...

Couples coping with sensory loss: A dyadic study of the roles of self- and perceived partner acceptance.

Science.gov (United States)

Lehane, Christine M; Nielsen, Tine; Wittich, Walter; Langer, Shelby; Dammeyer, Jesper

2018-03-30

Hearing-, vision-, and dual-sensory loss have been linked to relational and psychological distress among adults with sensory loss (AWSLs) and their spouses. Regardless, research on factors associated with couples' adjustment is lacking. This study examined the stability and strength of associations between self-acceptance of sensory loss, perceived partner acceptance of sensory loss, and relationship satisfaction and psychological distress among AWSLs and their spouses over time. A total of 122 AWSLs and their spouses completed an online survey at two time points over a 6-month period. A multigroup (i.e., time 1 and time 2) actor-partner interdependence model assessed the stability and strength of actor and partner effects of self-acceptance and perceived partner acceptance on each partner's relationship satisfaction and psychological distress over time. No moderation by time was identified, indicating stability in associations over the 6-month period. Overall, both actor and partner effects were evident. Specifically, self-acceptance among AWSLs was inversely associated with own psychological distress and the relationship satisfaction of spouses. Self-acceptance by spouses was inversely associated with the psychological distress of AWSLs and spouses. Perception of spouse acceptance by AWSLs was positively associated with own and spouse relationship satisfaction. Interventions targeting acceptance that incorporate a family systems perspective may be beneficial in alleviating psychological and relational distress among couples coping with sensory loss. Statement of contribution What is already known on this subject? The experience of hearing and/or vision loss has been linked to heightened distress both psychologically and within intimate relationships. Prior research has demonstrated a link between an individual's ability to accept their sensory loss and healthier well-being. What does this study add? This is the first dyadic study of sensory loss acceptance and

Point-of-Care Testing for Anemia, Diabetes, and Hypertension: A Pharmacy-Based Model in Lima, Peru.

Science.gov (United States)

Saldarriaga, Enrique M; Vodicka, Elisabeth; La Rosa, Sayda; Valderrama, Maria; Garcia, Patricia J

Prevention and control of chronic diseases is a high priority for many low- and middle-income countries. This study evaluated the feasibility and acceptability of training pharmacy workers to provide point-of-care testing for 3 chronic diseases-hypertension, diabetes, and anemia-to improve disease detection and awareness through private pharmacies. We developed a multiphase training curriculum for pharmacists and pharmacy technicians to build capacity for identification of risk factors, patient education, point-of-care testing, and referral for abnormal results. We conducted a pre-post evaluation with participants and evaluated results using Student t test for proportions. We conducted point-of-care testing with pharmacy clients and evaluated acceptability by patient characteristics (age, gender, and type of patient) using multiple logistic regression. In total, 72 pharmacy workers (66%) completed the full training curriculum. Pretest scores indicated that pharmacists had more knowledge and skills in chronic disease risk factors, patient education, and testing than pharmacy technicians. All participants improved their knowledge and skills after the training, and post-test scores indicated that pharmacy technicians achieved the same level of competency as pharmacists (P anemia than a traditional health center. Fast service was very important: 41% ranked faster results and 30% ranked faster attention as the most important factor for receiving diagnostic testing in the pharmacy. We found that it is both feasible for pharmacies and acceptable to clients to train pharmacy workers to provide point-of-care testing for anemia, diabetes, and hypertension. This innovative approach holds potential to increase early detection of risk factors and bolster disease prevention and management efforts in Peru and other low- and middle-income settings. Copyright © 2017. Published by Elsevier Inc.

Experimental determination of the yield stress curve of the scotch pine wood materials

Science.gov (United States)

Günay, Ezgi; Aygün, Cevdet; Kaya, Şükrü Tayfun

2013-12-01

Yield stress curve is determined for the pine wood specimens by conducting a series of tests. In this work, pinewood is modeled as a composite material with transversely isotropic fibers. Annual rings (wood grain) of the wood specimens are taken as the major fiber directions with which the strain gauge directions are aligned. For this purpose, three types of tests are arranged. These are tensile, compression and torsion loading tests. All of the tests are categorized with respect to fiber orientations and their corresponding loading conditions. Each test within these categories is conducted separately. Tensile and compression tests are conducted in accordance with standards of Turkish Standards Institution (TSE) whereas torsion tests are conducted in accordance with Standards Australia. Specimens are machined from woods of Scotch pine which is widely used in boat building industries and in other structural engineering applications. It is determined that this species behaves more flexibly than the others. Strain gauges are installed on the specimen surfaces in such a way that loading measurements are performed along directions either parallel or perpendicular to the fiber directions. During the test and analysis phase of yield stress curve, orientation of strain gauge directions with respect to fiber directions are taken into account. The diagrams of the normal stress vs. normal strain or the shear stress vs. shear strain are plotted for each test. In each plot, the yield stress is determined by selecting the point on the diagram, the tangent of which is having a slope of 5% less than the slope of the elastic portion of the diagram. The geometric locus of these selected points constitutes a single yield stress curve on σ1-σ2 principal plane. The resulting yield stress curve is plotted as an approximate ellipse which resembles Tsai-Hill failure criterion. The results attained in this work, compare well with the results which are readily available in the literature.

Automatic exposure control systems designed to maintain constant image noise: effects on computed tomography dose and noise relative to clinically accepted technique charts.

Science.gov (United States)

Favazza, Christopher P; Yu, Lifeng; Leng, Shuai; Kofler, James M; McCollough, Cynthia H

2015-01-01

To compare computed tomography dose and noise arising from use of an automatic exposure control (AEC) system designed to maintain constant image noise as patient size varies with clinically accepted technique charts and AEC systems designed to vary image noise. A model was developed to describe tube current modulation as a function of patient thickness. Relative dose and noise values were calculated as patient width varied for AEC settings designed to yield constant or variable noise levels and were compared to empirically derived values used by our clinical practice. Phantom experiments were performed in which tube current was measured as a function of thickness using a constant-noise-based AEC system and the results were compared with clinical technique charts. For 12-, 20-, 28-, 44-, and 50-cm patient widths, the requirement of constant noise across patient size yielded relative doses of 5%, 14%, 38%, 260%, and 549% and relative noises of 435%, 267%, 163%, 61%, and 42%, respectively, as compared with our clinically used technique chart settings at each respective width. Experimental measurements showed that a constant noise-based AEC system yielded 175% relative noise for a 30-cm phantom and 206% relative dose for a 40-cm phantom compared with our clinical technique chart. Automatic exposure control systems that prescribe constant noise as patient size varies can yield excessive noise in small patients and excessive dose in obese patients compared with clinically accepted technique charts. Use of noise-level technique charts and tube current limits can mitigate these effects.

Using normalized difference vegetation index (NDVI) to estimate sugarcane yield and yield components

Science.gov (United States)

Sugarcane (Saccharum spp.) yield and yield components are important traits for growers and scientists to evaluate and select cultivars. Collection of these yield data would be labor intensive and time consuming in the early selection stages of sugarcane breeding cultivar development programs with a ...

The acceptance of uncertainty - a move towards an 'ecological' concept of law

International Nuclear Information System (INIS)

Ladeur, K.H.

1986-01-01

Within the framework of a study investigating the law applied as an instrument of global social steering, the author analyses the acceptance of uncertainty and resulting impacts, taking nuclear energy and the problems involved as the example to illustrate his point. The relationship between the law and social knowledge is first explained against the historical background and then in the light of the regulatory system established for the peaceful use of nuclear energy in accordance with the current scientific knowledge. The author tries to show why the reference to science as a medium of ''certainty and unambigiousness'' did not create the acceptance of nuclear energy one had hoped for. The evolution of the structure of social knowledge, i.e. increasing, awareness of uncertainty, enforces new ways and standards of reflection and enhanced need for consensus, because uncertainty is a problem of evaluating of risks, and cannot be solved by scientific or technical information. (HSCH) [de

Potato yield and yield structure depending on irrigation

Directory of Open Access Journals (Sweden)

Milić Stanko

2010-01-01

Full Text Available In the agroclimatic conditions of the Vojvodina Province, the application of an economic water regime and modern technology is necessary for stable and intensive potato production. A two-year experiment on calcareous chernozem was carried out to determine how irrigation and different pre-irrigation soil moisture affect potato yield and distribution of tuber fraction in the potato yield. The block-design trial had four replicates and was adapted for sprinkler irrigation conditions. It included four treatments: irrigation with pre-irrigation moisture levels of 60 % of field water capacity (FC, irrigation with pre-irrigation moisture levels of 70 % (FC, irrigation with pre-irrigation moisture levels of 80% (FC, and a non-irrigated control treatment. Irrigation significantly increased the yield of potato, which increased from 37.27 % to 75.86 %. Under irrigation, the percentage of small fractions decreased in favour of the 55 mm one, or fractions above the 45-55 mm range. On average, irrigated treatments produced significantly more tubers than the conditions of natural water supply. .

Measurement of activation yields for platinum group elements using Bremsstrahlung radiation with end-point energies in the range 11-14 MeV

Energy Technology Data Exchange (ETDEWEB)

Tickner, James, E-mail: james.tickner@csiro.a [CSIRO Process Science and Engineering, PMB 5, Menai, NSW 2234 (Australia); Bencardino, Raffaele; Roach, Greg [CSIRO Process Science and Engineering, PMB 5, Menai, NSW 2234 (Australia)

2010-01-15

Activation yields have been measured for (gamma,n) reactions of the elements Ru, Rh, Pd, Ir and Pt. Metallic foils of natural isotopic composition were irradiated using Bremsstrahlung radiation produced from an electron linear accelerator operated with electron beam energies in the range 11-14 MeV. Activation products, including both unstable ground states and metastates were measured using a high-purity germanium detector. Cross-sections were estimated from the yield data by assuming a simple two-parameter model for the shape of the cross-section with energy.

Measurement of activation yields for platinum group elements using Bremsstrahlung radiation with end-point energies in the range 11-14 MeV

International Nuclear Information System (INIS)

Tickner, James; Bencardino, Raffaele; Roach, Greg

2010-01-01

Activation yields have been measured for (γ,n) reactions of the elements Ru, Rh, Pd, Ir and Pt. Metallic foils of natural isotopic composition were irradiated using Bremsstrahlung radiation produced from an electron linear accelerator operated with electron beam energies in the range 11-14 MeV. Activation products, including both unstable ground states and metastates were measured using a high-purity germanium detector. Cross-sections were estimated from the yield data by assuming a simple two-parameter model for the shape of the cross-section with energy.

Sustainability and acceptance - new challenges for nuclear energy

International Nuclear Information System (INIS)

Lensa, W. von

2001-01-01

This paper discusses the concept of sustainability in relation to acceptance of nuclear energy. Acceptance is viewed in terms of public acceptance, industrial acceptance, and internal acceptance/consensus within the nuclear community. It addresses sustainability criteria, the need for innovation, and the different levels of acceptability. The mechanisms of risk perception are discussed along with the technological consequences from risk perception mechanisms leading to specific objections against nuclear energy. (author)

Effects of different irrigation intervals and plant density on morphological characteristics, grain and oil yields of sesame (Sesamum indicum

Directory of Open Access Journals (Sweden)

parviz rezvani moghadam

2009-06-01

Full Text Available In order to study the effects of different irrigation intervals and plant density on morphological characteristics, grain and oil yields of sesame, an experiment was conducted at experimental station, college of agriculture, Ferdowsi University of Mashhad. Four different irrigation intervals (one, two, three and four weeks with four plant densities (20, 30, 40 and 50 plants/m2 were compared in a spilt plot arrangement based on randomized complete block design with four replications. Irrigation intervals and plant densities allocated in main plots and subplots, respectively. Different characteristics such as plant height, distance of first capsule from soil surface, number of branches per plant, number of grains per capsule, number of capsules per plant, grain yield, 1000-seed weight, harvest index and oil yield were recorded. The results showed that there were no significant difference between different irrigation intervals in terms of distance of first capsule from soil surface, number of grains per capsule, 1000-seed weight and harvest index. Different irrigation intervals had significant effects on plant height, number of branches per plant, number of capsules per plant, grain yield and oil yield. There were significant differences between different plant densities in terms of distance of first capsule from soil surface, number of branches per plant, number of graines per capsule, number of capsules per plant, grain yield, harvest index and oil yield. The highest grain yield (798/7 kg/ha and oil yield (412/8 kg/ha were obtained at one week and four weeks irrigation intervals, respectively. Between all treatments, 50 plants/m2 and one week irrigation interval produced the highest grain yield (914/7 kg/ha and oil yield (478/6 kg/ha. Because of shortage of water in Mashhad condition, the results recommended that, 50 plants/m2 and two weeks irrigation interval produced rather acceptable grain yield, with less water consumption.

Nuclear Energy and Public Acceptance

International Nuclear Information System (INIS)

Daifuku, K.

2002-01-01

The continued use of nuclear power in the European Union and elsewhere requires an adequate level of public and political acceptance. A lack of acceptance is often mistakenly cited as a reason for the slowdown in nuclear power plant construction in Western Europe and as a justification for abandoning nuclear power. In fact, the reasons for the slowdown have more to do with the following two factors: Plentiful supplies of low-priced natural gas, making gas-fired power plants a more attractive investment choice; more than adequate supplies of electricity which have curbed the need for the construction of new plant of any kind. In general, moves towards a withdrawal from nuclear in certain Community countries have been due to party political pressures and have not been a response to public opposition to nuclear. In addition, opinion polls do not show widespread public opposition to the use of nuclear power. Figures consistently indicate that the use of nuclear power does not come high on the list of most people's main worries. Their main concerns focus on other issues such as crime and financial problems. In the main, electricity is taken for granted in the industrialised world. Electric power only becomes an issue when there is a threat of shortages. So if public acceptance is not the main obstacle, what is? Political acceptance is an integral part of the process in which nuclear becomes acceptable or not. The relationship between public and political acceptance and the role of the industry in this context, on how to foster a better trialogue, will be examined. (author)

Comparing predicted yield and yield stability of willow and Miscanthus across Denmark

DEFF Research Database (Denmark)

Larsen, Søren; Jaiswal, Deepak; Bentsen, Niclas Scott

2016-01-01

was 12.1 Mg DM ha−1 yr−1 for willow and 10.2 Mg DM ha−1 yr−1 for Miscanthus. Coefficent of variation as a measure for yield stability was poorest on the sandy soils of northern and western Jutland and the year-to-year variation in yield was greatest on these soils. Willow was predicted to outyield...... Miscanthus on poor, sandy soils whereas Miscanthus was higher yielding on clay-rich soils. The major driver of yield in both crops was variation in soil moisture, with radiation and precipitation exerting less influence. This is the first time these two major feedstocks for northern Europe have been compared....... The semi-mechanistic crop model BioCro was used to simulate the production of both short rotation coppice (SRC) willow and Miscanthus across Denmark. Predictions were made from high spatial resolution soil data and weather records across this area for 1990-2010. The potential average, rain-fed mean yield...

Shortest path problem on a grid network with unordered intermediate points

Science.gov (United States)

Saw, Veekeong; Rahman, Amirah; Eng Ong, Wen

2017-10-01

We consider a shortest path problem with single cost factor on a grid network with unordered intermediate points. A two stage heuristic algorithm is proposed to find a feasible solution path within a reasonable amount of time. To evaluate the performance of the proposed algorithm, computational experiments are performed on grid maps of varying size and number of intermediate points. Preliminary results for the problem are reported. Numerical comparisons against brute forcing show that the proposed algorithm consistently yields solutions that are within 10% of the optimal solution and uses significantly less computation time.

The current acceptance, accessibility and recognition of Chinese and Ayurvedic medicine in the United States in the public, governmental, and industrial sectors.

Science.gov (United States)

Park, Jongbae J; Beckman-Harned, Selena; Cho, Gayoung; Kim, Duckhee; Kim, Hangon

2012-06-01

To assess the current level of acceptance in the United States of complementary and alternative medicine, recent research into the prevalence, acceptance, accessibility, and recognition of complementary and alternative therapies were reviewed. Several signs point to an increasing acceptance of complementary and alternative medicine in the United States; the use of complementary and alternative medicine is significantly increasing, many aspects of Chinese medicine and Ayurveda are becoming mainstream, practitioners in the United States are beginning to be licensed, and insurance companies are beginning to cover some complementary and alternative therapies. Remaining challenges to true acceptance include the restrictive Western mindset, the absence of published studies, a lack of consistent manufacturing processes and quality standards, and a fear of adulteration. Although the field still faces many challenges, alternative and complementary medicine, including Chinese medicine and Ayurvedic medicine, is becoming more accepted and accessible in the United States.

Acceptability of GM foods among Pakistani consumers

Science.gov (United States)

Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

2016-01-01

ABSTRACT In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers. PMID:27494790

Acceptability of GM foods among Pakistani consumers.

Science.gov (United States)

Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

2016-04-02

In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers.

Consumer Acceptance of Novel Foods

NARCIS (Netherlands)

Fischer, A.R.H.; Reinders, M.J.

2016-01-01

The success of novel foods depends to a considerable extent on whether consumers accept those innovations. This chapter provides an overview of current knowledge relevant to consumer acceptance of innovations in food. A broad range of theories and approaches to assess consumer response to

Characterizing Sorghum Panicles using 3D Point Clouds

Science.gov (United States)

Lonesome, M.; Popescu, S. C.; Horne, D. W.; Pugh, N. A.; Rooney, W.

2017-12-01

To address demands of population growth and impacts of global climate change, plant breeders must increase crop yield through genetic improvement. However, plant phenotyping, the characterization of a plant's physical attributes, remains a primary bottleneck in modern crop improvement programs. 3D point clouds generated from terrestrial laser scanning (TLS) and unmanned aerial systems (UAS) based structure from motion (SfM) are a promising data source to increase the efficiency of screening plant material in breeding programs. This study develops and evaluates methods for characterizing sorghum (Sorghum bicolor) panicles (heads) in field plots from both TLS and UAS-based SfM point clouds. The TLS point cloud over experimental sorghum field at Texas A&M farm in Burleston County TX were collected using a FARO Focus X330 3D laser scanner. SfM point cloud was generated from UAS imagery captured using a Phantom 3 Professional UAS at 10m altitude and 85% image overlap. The panicle detection method applies point cloud reflectance, height and point density attributes characteristic of sorghum panicles to detect them and estimate their dimensions (panicle length and width) through image classification and clustering procedures. We compare the derived panicle counts and panicle sizes with field-based and manually digitized measurements in selected plots and study the strengths and limitations of each data source for sorghum panicle characterization.

On the Users’ Acceptance of IoT Systems: A Theoretical Approach

Directory of Open Access Journals (Sweden)

Rino Falcone

2018-03-01

Full Text Available In the next future the IoT system will introduce extraordinary changes in our daily life. We will communicate with our domestic appliances to inform them about our preferences and goals and they will develop initiative and autonomy to be put at our service. But are we sure that we can afford all the automation they could offer? Are we able to manage it? Is it compatible with our cognitive attitudes and our actual and real goals? In this paper, we face the question of the IoT from the point of view of the user. We start analyzing which reasons undermine the acceptance of IoT systems and then we propose a possible solution. The first contribution of this work is the level characterization of the autonomy a user can grant to an IoT device. The second contribution is a theoretical model to deal with users and to stimulate users’ acceptance. By the means of simulation, we show how the model works and we prove that it leads the system to an optimal solution.

Impact of an Acceptance Facilitating Intervention on Patients' Acceptance of Internet-based Pain Interventions: A Randomized Controlled Trial.

Science.gov (United States)

Baumeister, Harald; Seifferth, Holger; Lin, Jiaxi; Nowoczin, Lisa; Lüking, Marianne; Ebert, David

2015-06-01

Results from clinical trials indicate that Internet-based psychological pain interventions are effective in treating chronic pain. However, little is known about patients' acceptance of these programs and how to positively influence patients' intention to engage in them. Therefore, the present study aimed (1) to assess patients' acceptance of Internet-based interventions, and (2) to examine whether patients' acceptance can be increased by an acceptance facilitating intervention. A total of 104 patients with chronic pain from 2 pain units were randomly allocated to an intervention group (IG) and a no-intervention control group (CG). The IG was shown a short informational video about Internet-based psychological pain interventions before receiving a questionnaire on patients' acceptance of Internet-based psychological pain interventions and predictors of acceptance (performance expectancy, effort expectancy, social influence, facilitating conditions, Internet usage, and Internet anxiety). The CG filled out the questionnaire immediately. Patients' acceptance was measured with a 4-item scale (sum score ranging from 4 to 20). Baseline acceptance of Internet-based interventions was reported as low (sum-score:4-9) by 53.8%, moderate (10 to 15) by 42.3%, and high (16 to 20) by 3.9% of the patients with chronic pain in the CG. The IG showed a significantly higher acceptance (M = 12.17, SD = 4.22) than the CG (M = 8.94, SD = 3.71) with a standardized mean difference of d = 0.81 (95% CI, 0.41, 1.21). All predictor variables were significantly improved in the IG compared with the CG, except for Internet usage. Patients with chronic pain display a relatively low acceptance of Internet-based psychological pain interventions, which can be substantially increased by a short informational video.

Global evaluation of a semiempirical model for yield anomalies and application to within-season yield forecasting.

Science.gov (United States)

Schauberger, Bernhard; Gornott, Christoph; Wechsung, Frank

2017-11-01

Quantifying the influence of weather on yield variability is decisive for agricultural management under current and future climate anomalies. We extended an existing semiempirical modeling scheme that allows for such quantification. Yield anomalies, measured as interannual differences, were modeled for maize, soybeans, and wheat in the United States and 32 other main producer countries. We used two yield data sets, one derived from reported yields and the other from a global yield data set deduced from remote sensing. We assessed the capacity of the model to forecast yields within the growing season. In the United States, our model can explain at least two-thirds (63%-81%) of observed yield anomalies. Its out-of-sample performance (34%-55%) suggests a robust yield projection capacity when applied to unknown weather. Out-of-sample performance is lower when using remote sensing-derived yield data. The share of weather-driven yield fluctuation varies spatially, and estimated coefficients agree with expectations. Globally, the explained variance in yield anomalies based on the remote sensing data set is similar to the United States (71%-84%). But the out-of-sample performance is lower (15%-42%). The performance discrepancy is likely due to shortcomings of the remote sensing yield data as it diminishes when using reported yield anomalies instead. Our model allows for robust forecasting of yields up to 2 months before harvest for several main producer countries. An additional experiment suggests moderate yield losses under mean warming, assuming no major changes in temperature extremes. We conclude that our model can detect weather influences on yield anomalies and project yields with unknown weather. It requires only monthly input data and has a low computational demand. Its within-season yield forecasting capacity provides a basis for practical applications like local adaptation planning. Our study underlines high-quality yield monitoring and statistics as critical

THE INFLUENCE OF FERTILIZATION ON YIELD AND YIELD COMPONENT FORMATION OF SOYBEAN VARIETIES

Directory of Open Access Journals (Sweden)

Eva CANDRÁKOVÁ

2009-03-01

Full Text Available In 2005 and 2006, the influence of fertilization was investigated on forming of yield components and yield of three soybean varieties in sugar beet growing area. Varieties Korada, Supra and OAC Vision were grown. Number of plants per m2, number of pods per plant, number of seeds in pod, thousand seeds weight, yield of seeds, yield of stems and harvest index were examined. Variants of fertilization: I. non-fertilized control, II. LAV 27 % (40 kg ha-1 net nutrient of N in growing stage of first pair of true leaves unfolded, III. Humix komplet (rate 8 l.ha-1 applied in growing stage of first pair of true leaves unfolded (4 l.ha-1 and in growing stage of first flower buds visible (4 l.ha-1, IV. Humix komplet in rate 8 l.ha-1 applied in growing stage of first pair of true leaves unfolded. The yields of seeds and stems were high significantly influenced by variety, fertilization and year. The significantly highest yield of seeds was achieved by Korada variety (4,04 t.ha-1. Varieties OAC Vision and Supra reached yields in interval 3,74-3,84 t.ha-1. Split rate of Humix komplet (III var significantly influenced yield of seeds and stems. The fertilization have increased weight of seeds in proportion to aboveground phyto-mass weight, what was expressed by harvest index.

GENETIC ANALYSIS OF YIELD AND YIELD COMPONENTS IN ...

African Journals Online (AJOL)

ACSS

2Department of Crop and Soil Sciences, Faculty of Agriculture and Natural Resources, Kwame Nkrumah. University of Science and Technology, Kumasi, Ghana. Corresponding author: kamara.nabieu@yahoo.com. (Received 1 February, 2017; accepted 16 November, 2017). ABSTRACT. The number one goal of most rice ...

Public Internet Access Points (PIAPs) and Their Social Impact: A Case Study from Turkey

Science.gov (United States)

Afacan, Gulgun; Er, Erkan; Arifoglu, Ali

2013-01-01

Building public Internet access points (PIAPs) is a significant contribution of governments towards achieving an information society. While many developing countries are investing great amounts to establish PIAPs today, people may not use PIAPs effectively. Yet, the successful implementation of PIAPs is the result of citizens' acceptance to use…

Evaluation of the Acceptance of Audience Response System by Corporations Using the Technology Acceptance Model

Science.gov (United States)

Chu, Hsing-Hui; Lu, Ta-Jung; Wann, Jong-Wen

The purpose of this research is to explore enterprises' acceptance of Audience Response System (ARS) using Technology Acceptance Model (TAM). The findings show that (1) IT characteristics and facilitating conditions could be external variables of TAM. (2) The degree of E-business has positive significant correlation with behavioral intention of employees. (3) TAM is a good model to predict and explain IT acceptance. (4) Demographic variables, industry and firm characteristics have no significant correlation with ARS acceptance. The results provide useful information to managers and ARS providers that (1) ARS providers should focus more on creating different usages to enhance interactivity and employees' using intention. (2) Managers should pay attention to build sound internal facilitating conditions for introducing IT. (3) According to the degree of E-business, managers should set up strategic stages of introducing IT. (4) Providers should increase product promotion and also leverage academic and government to promote ARS.

Pedestrian temporal and spatial gap acceptance at mid-block street crossing in developing world.

Science.gov (United States)

Pawar, Digvijay S; Patil, Gopal R

2015-02-01

Most of the midblock pedestrian crossings on urban roads in India are uncontrolled; wherein the high degree of discretion in pedestrians' behavior while crossing the traffic stream, has made the situation complex to analyze. Vehicles do not yield to pedestrians, even though the traffic laws give priority to pedestrians over motorized vehicles at unsignalized pedestrian crossings. Therefore, a pedestrian has to decide if an available gap is safe or not for crossing. This paper aims to investigate pedestrian temporal and spatial gap acceptance for midblock street crossings. Field data were collected using video camera at two midblock pedestrian crossings. The data extraction in laboratory resulted in 1107 pedestrian gaps. Available gaps, pedestrians' decision, traffic volume, etc. were extracted from the videos. While crossing a road with multiple lanes, rolling gap acceptance behavior was observed. Using binary logit analysis, six utility models were developed, three each for temporal and spatial gaps. The 50th percentile temporal and spatial gaps ranged from 4.1 to 4.8s and 67 to 79 m respectively, whereas the 85th percentile temporal and spatial gaps ranged from 5 to 5.8s and 82 to 95 m respectively. These gap values were smaller than that reported in the studies in developed countries. The speed of conflicting vehicle was found to be significant in spatial gap but not in temporal gap acceptance. The gap acceptance decision was also found to be affected by the type of conflicting vehicles. The insights from this study can be used for the safety and performance evaluation of uncontrolled midblock street crossings in developing countries. Copyright © 2014 Elsevier Ltd and National Safety Council. All rights reserved.

Winter sowing of adapted lines as a potential yield increase strategy in lentil (Lens culinaris Medik.)

Energy Technology Data Exchange (ETDEWEB)

Barrios, A.; Aparicio, T.; Rodríguez, M.J.; Pérez de la Vega, M.; Caminero, C.

2016-11-01

Lentil (Lens culinaris Medik. subsp. culinaris) is a traditional crop in Spain although current grain yield in Spain is relatively low and unstable. The effect of an early sowing date (winter sowing) on yield in the Spanish Central Plateau (meseta) was analyzed comparing it to the traditional spring sowing. Yield from eleven cultivars currently available for sowing in Spain and two F6:7 populations of recombinant inbred lines (RIL), ´Precoz´ × ´WA8649041´ (89 lines) and ´BGE016365´ × ´ILL1918´ (118 lines), was evaluated in winter and spring sowing dates for three seasons (2005/06, 2006/07 and 2007/08) and two localities. Yield and stability were assessed by the method of consistency of performance with some modifications. When comparing with the best currently available cultivars sown in the traditional spring sowing date, (with an estimated average yield of 43.9 g/m in our experimental conditions), winter sowing using adapted breeding lines proved to be a suitable strategy for increasing lentil yield and yield stability in the Spanish meseta, with an average yield increase of 111% (reaching an estimated yield of 92.8 g/m). Results point to that lentil production can greatly increase in the Spanish meseta if adequate plant materials, such as some of the lines analyzed, are sown at late fall. (Author)

Winter sowing of adapted lines as a potential yield increase strategy in lentil (Lens culinaris Medik.

Directory of Open Access Journals (Sweden)

Abel Barrios

2016-06-01

Full Text Available Lentil (Lens culinaris Medik. subsp. culinaris is a traditional crop in Spain although current grain yield in Spain is relatively low and unstable. The effect of an early sowing date (winter sowing on yield in the Spanish Central Plateau (meseta was analyzed comparing it to the traditional spring sowing. Yield from eleven cultivars currently available for sowing in Spain and two F6:7  populations of recombinant inbred lines (RIL, ´Precoz´ × ´WA8649041´ (89 lines and ´BGE016365´ × ´ILL1918´ (118 lines, was evaluated in winter and spring sowing dates for three seasons (2005/06, 2006/07 and 2007/08 and two localities. Yield and stability were assessed by the method of consistency of performance with some modifications. When comparing with the best currently available cultivars sown in the traditional spring sowing date, (with an estimated average yield of 43.9 g/m in our experimental conditions, winter sowing using adapted breeding lines proved to be a suitable strategy for increasing lentil yield and yield stability in the Spanish meseta, with an average yield increase of 111% (reaching an estimated yield of 92.8 g/m. Results point to that lentil production can greatly increase in the Spanish meseta if adequate plant materials, such as some of the lines analyzed, are sown at late fall.

Effects of application boron on yields, yield component and oil ...

African Journals Online (AJOL)

The study was conducted to investigate the effects of five boron (B) doses; 0, 2.5, 5.0, 7.5 and 10.0 kg B ha-1 in B-deficient calcareous soils on yield and some yield components of four sunflower genotypes. Genotypes have shown variations with respect to their responses to B applications. AS-615 and Coban had the ...

Origin of chaos near critical points of quantum flow.

Science.gov (United States)

Efthymiopoulos, C; Kalapotharakos, C; Contopoulos, G

2009-03-01

The general theory of motion in the vicinity of a moving quantum nodal point (vortex) is studied in the framework of the de Broglie-Bohm trajectory method of quantum mechanics. Using an adiabatic approximation, we find that near any nodal point of an arbitrary wave function psi there is an unstable point (called the X point) in a frame of reference moving with the nodal point. The local phase portrait forms always a characteristic pattern called the "nodal-point- X -point complex." We find general formulas for this complex as well as necessary and sufficient conditions of validity of the adiabatic approximation. We demonstrate that chaos emerges from the consecutive scattering events of the orbits with nodal-point- X -point complexes. The scattering events are of two types (called type I and type II). A theoretical model is constructed yielding the local value of the Lyapunov characteristic numbers in scattering events of both types. The local Lyapunov characteristic number scales as an inverse power of the speed of the nodal point in the rest frame, implying that it scales proportionally to the size of the nodal-point- X -point complex. It is also an inverse power of the distance of a trajectory from the X point's stable manifold far from the complex. This distance plays the role of an effective "impact parameter." The results of detailed numerical experiments with different wave functions, possessing one, two, or three moving nodal points, are reported. Examples are given of regular and chaotic trajectories, and the statistics of the Lyapunov characteristic numbers of the orbits are found and compared to the number of encounter events of each orbit with the nodal-point- X -point complexes. The numerical results are in agreement with the theory, and various phenomena appearing at first as counterintuitive find a straightforward explanation.

Influence of Inter and Intra-rows Spacing on Yield and Yield ...

African Journals Online (AJOL)

Abyssinia

yield and yield components of fresh market(Bishola) and processing (Cochoro) tomato cultivars. ... row spacing had a significant effect on plan canopy width, above ground dry biomass, ... Poor varietal performance and management practices that includeinter and intra-row spacing ..... of assimilate export from the leaves.

Is Dual Agency in Housing Transactions Ethically Acceptable?: A Japan-U.S. Comparison

OpenAIRE

Okoshi, Toshiyuki

2017-01-01

This paper focuses on the problem of real estate agentsʼ disloyalty to their clients (buyers or sellers of houses) caused by asymmetric information, and compares several previous studies in the US to this research on the effects of dual agency deals in Japan. Dual agency means that the same real estate agent represents both seller and buyer in a housing transaction. Furthermore, this paper considers whether dual agency can be ethically accepted in housing transactions. The important point is ...

Classification of Voronoi and Delone tiles of quasicrystals: III. Decagonal acceptance window of any size

International Nuclear Information System (INIS)

Masakova, Z; Patera, J; Zich, J

2005-01-01

This paper is the last of a series of three articles presenting a classification of Vornoi and Delone tilings determined by point sets Σ(Ω) ('quasicrystals'), built by the standard projection of the root lattice of type A 4 to a two-dimensional plane spanned by the roots of the Coxeter group H 2 (dihedral group of order 10). The acceptance window Ω for Σ(Ω) in the present paper is a regular decagon of any radius 0 k , τ = 1/2(1+√5) and k element of Z. The number of Voronoi tiles in different quasicrystal tilings varies between 3 and 12. Similarly, the number of Delone tiles is varying between 4 and 6. There are 7 VT sets of the 'generic' type and 7 of the 'singular' type. The latter occur for seven precise values of the radius of the acceptance window. Quasicrystals with acceptance windows with radii in between these values have constant VT sets, only the relative densities and arrangement of the tiles in the tilings change. Similarly, we distinguish singular and generic sets DT of Delone tiles

HPS simulation and acceptance

Energy Technology Data Exchange (ETDEWEB)

Mundim, Luiz Martins [UERJ, Rio de Janeiro, RJ (Brazil); Pol, Maria Elena [CBPF, Rio de Janeiro, RJ (Brazil)

2013-07-01

Full text: The High Precision Spectrometer (HPS) is a proposal of sub-detector to be installed in the region of 200-240m from each side of CMS along the LHC beam-line to measure scattered protons from exclusive centrally produced processes, pp → p + X + p. In order to study the protons that reach the detectors, the beam-line of the LHC accelerator has to be taken into account, as the particles are deflected by dipoles and suffer the influence of quadrupoles and other beam devices. The LHC team provides a detailed description of these elements, currents, energies, magnetic fields, and all the information needed to study the propagation of the protons. The program HECTOR, developed at the University of Louvain, uses the information from LHC to calculate at any point along the beam-line the kinematic quantities that characterize the scattered protons. A simple minded program was initially developed for the preliminary studies of acceptances varying the position and size of the foreseen detectors. Also, it took into account vertex and position smearing, to simulate a realistic resolution of the tracking detectors. These studies were performed using a particle gun generator which shoot protons from the IP within reasonable ranges of possible t and ξ (the square of the four-momentum transfer and the fractional energy loss of the outgoing proton in a diffractive collision), and propagated them to the position of the tracking detectors. These kinematic quantities were reconstructed back at the IP using the transport equations from HECTOR. This simplified simulation was afterwards interfaced with the full software of CMS, CMSSW, in such a way that when a diffractive event was fully simulated and reconstructed in the central detector, the outgoing protons were treated by the HPS software and then the complete (CMS+HPS) event was output. The ExHuME generator was used to produce Monte Carlo simulations to study the mass acceptance of the HPS detector, and central and

Effects of heterosis for yield and yield components obtained by crossing divergent alfalfa populations

Directory of Open Access Journals (Sweden)

Katić Slobodan

2010-01-01

Full Text Available When breeding alfalfa for yield performance, it is necessary to use high-yielding parents obtained by different breeding methods. The assumption at the onset of this research was that crossing highest-yielding domestic cultivars with divergent populations from geographically distant breeding centers could result in the expression of heterotic effects in their hybrids contributing to increased alfalfa yield. The objective of this study was to determine yield and yield components and heterotic effects in hybrid progenies obtained by crossing the domestic cultivars NS Banat ZMS II and NS Mediana ZMS V with the cultivars Pella, Dolichi and Hyliki from Greece, UMSS 2001 from Bolivia and Jogeva 118 from Estonia in two series. The field trial planted in 2006, included 13 F1 hybrids and 6 of 7 initial parents in both series. Heterotic effects for yields of forage and hay were observed in 4 combinations (C NS Banat ZMS II x E Hyliki; C NS Banat ZMS II x E UMSS 2001; C NS Mediana ZMS V x E Hyliki; C NS Mediana ZMS V x E Dolichi. The populations that exhibited heterosis in a set of crossings are recommended for use as parent components for development of high-yielding synthetic alfalfa cultivars. .

OTM Machine Acceptance: In the Arab Culture

Science.gov (United States)

Rashed, Abdullah; Santos, Henrique

Basically, neglecting the human factor is one of the main reasons for system failures or for technology rejection, even when important technologies are considered. Biometrics mostly have the characteristics needed for effortless acceptance, such as easiness and usefulness, that are essential pillars of acceptance models such as TAM (technology acceptance model). However, it should be investigated. Many studies have been carried out to research the issues of technology acceptance in different cultures, especially the western culture. Arabic culture lacks these types of studies with few publications in this field. This paper introduces a new biometric interface for ATM machines. This interface depends on a promising biometrics which is odour. To discover the acceptance of this biometrics, we distributed a questionnaire via a web site and called for participation in the Arab Area and found that most respondents would accept to use odour.

Status of fission yield measurements

International Nuclear Information System (INIS)

Maeck, W.J.

1979-01-01

Fission yield measurement and yield compilation activities in the major laboratories of the world are reviewed. In addition to a general review of the effort of each laboratory, a brief summary of yield measurement activities by fissioning nuclide is presented. A new fast reactor fission yield measurement program being conducted in the US is described

Acceptance conditions in automated negotiation

NARCIS (Netherlands)

Baarslag, T.; Hindriks, K.V.; Jonker, C.M.

2011-01-01

In every negotiation with a deadline, one of the negotiating parties has to accept an offer to avoid a break off. A break off is usually an undesirable outcome for both parties, therefore it is important that a negotiator employs a proficient mechanism to decide under which conditions to accept.

12 CFR 7.1007 - Acceptances.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Acceptances. 7.1007 Section 7.1007 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY BANK ACTIVITIES AND OPERATIONS Bank Powers... financing credit transactions. Bankers' acceptances may be used for such purpose, since the making of...

Acceptance of disease and the quality of life in patients with enteric stoma.

Science.gov (United States)

Szpilewska, Katarzyna; Juzwiszyn, Jan; Bolanowska, Zofia; Bolanowska, Zofia; Milan, Magdalena; Chabowski, Mariusz; Janczak, Dariusz

2018-02-28

The main reason of the emergence of enteric stoma is colorectal cancer. Enteric stoma is a serious health, as well as life problem. In Poland, there are about 6,000 stoma surgeries yearly. It changes the functioning of patients, restricts their daily activity and influences their quality of life significantly. Therefore, in the modern treatment process, all spheres of human life and its surroundings are considered. The evaluation of the quality of life and the level of acceptance of the disease enables us to identify the regions in which patients require attention and help, as well as places to which health promotion among patients with a stoma should be directed. The aim of the study was the evaluation of the acceptance of the disease and the quality of life in patients with colostomy. The study conducted between February 2015 and February 2016 included101 patients with enteric stoma of the Provincial Specialist Hospital in Wrocław at Kamieńskiego St. in the departments of General Surgery with the Subdivision of Traumatology and Orthopedic Surgery, Subdivision of Metabolic Surgery, Subdivision of Endocrine Surgery and Oncological Surgery . Two anonymous questionnaires, i.e., health-related quality of life (HRQoL) and acceptance of illness scale (AIS), were used. 60% (61 people) were women, and 40% (40 people) were men. The mean age was 48; the youngest respondent was 20 years old, and the oldest was 79 years old. 17% of the respondents had primary education, 25% - vocational, 33% - secondary and 26% - university-level. The most common reason for the emergence of a stoma among the respondents was colon cancer (44%), followed by: mechanical bowel onstruction (26%), intestinal damage following injuries (25%), inflammatory bowel disease (6%). The quality of life of patients with colostomy was evaluated in view of their health condition, postoperative recovery, everyday limitations, and self-evaluation. The majority of participants pointed to the deterioration of

Yield Stress Model for Molten Composition B-3

Science.gov (United States)

Davis, Stephen; Zerkle, David

2017-06-01

Composition B-3 (Comp B-3) is a melt-castable explosive composed of 60/40 wt% RDX/TNT (hexahydro-1,3,5-trinitro-1,3,5-triazine/2,4,6-trinitrotoluene). During casting operations thermal conditions are controlled which along with the low melting point of TNT and the insensitivity of the mixture to external stimuli leading to safe use. Outside these standard operating conditions a more rigorous model of Comp B-3 rheological properties is necessary to model thermal transport as Comp B-3 evolves from quiescent solid through vaporization/decomposition upon heating. One particular rheological phenomena of interest is Bingham plasticity, where a material behaves as a quiescent solid unless a sufficient load is applied, resulting in fluid flow. In this study falling ball viscometer data is used to model the change in Bingham plastic yield stresses as a function of RDX particle volume fraction; a function of temperature. Results show the yield stress of Comp B-3 (τy) follows the expression τy = B ϕ -ϕc N , where Φ and Φc are the volume fraction of RDX and a critical volume fraction, respectively and B and N are experimentally evaluated constants.

A Flexible VHDL Floating Point Module for Control Algorithm Implementation in Space Applications

Science.gov (United States)

Padierna, A.; Nicoleau, C.; Sanchez, J.; Hidalgo, I.; Elvira, S.

2012-08-01

The implementation of control loops for space applications is an area with great potential. However, the characteristics of this kind of systems, such as its wide dynamic range of numeric values, make inadequate the use of fixed-point algorithms.However, because the generic chips available for the treatment of floating point data are, in general, not qualified to operate in space environments and the possibility of using an IP module in a FPGA/ASIC qualified for space is not viable due to the low amount of logic cells available for these type of devices, it is necessary to find a viable alternative.For these reasons, in this paper a VHDL Floating Point Module is presented. This proposal allows the design and execution of floating point algorithms with acceptable occupancy to be implemented in FPGAs/ASICs qualified for space environments.

An assessment of irrigation needs and crop yield for the United States under potential climate changes

Science.gov (United States)

Brumbelow, Kelly; Georgakakos, Aris P.

2000-01-01

Past assessments of climate change on U.S. agriculture have mostly focused on changes in crop yield. Few studies have included the entire conterminous U.S., and few studies have assessed changing irrigation requirements. None have included the effects of changing soil moisture characteristics as determined by changing climatic forcing. This study assesses changes in irrigation requirements and crop yields for five crops in the areas of the U.S. where they have traditionally been grown. Physiologically-based crop models are used to incorporate inputs of climate, soils, agricultural management, and drought stress tolerance. Soil moisture values from a macroscale hydrologic model run under a future climate scenario are used to initialize soil moisture content at the beginning of each growing season. Historical crop yield data is used to calibrate model parameters and determine locally acceptable drought stress as a management parameter. Changes in irrigation demand and crop yield are assessed for both means and extremes by comparing results for atmospheric forcing close to the present climate with those for a future climate scenario. Assessments using the Canadian Center for Climate Modeling and Analysis General Circulation Model (CGCM1) indicate greater irrigation demands in the southern U.S. and decreased irrigation demands in the northern and western U.S. Crop yields typically increase except for winter wheat in the southern U.S. and corn. Variability in both irrigation demands and crop yields increases in most cases. Assessment results for the CGCM1 climate scenario are compared to those for the Hadley Centre for Climate Prediction and Research GCM (HadCM2) scenario for southwestern Georgia. The comparison shows significant differences in irrigation and yield trends, both in magnitude and direction. The differences reflect the high forecast uncertainty of current GCMs. Nonetheless, both GCMs indicate higher variability in future climatic forcing and, consequently

Relevant cost information for order acceptance decisions

NARCIS (Netherlands)

Wouters, M.J.F.

1997-01-01

Some economic considerations for order acceptance decisions are discussed. The relevant economic considerations for order acceptance are widely discussed in the literature: only those costs are relevant which would be avoidable by not accepting the order incremental costs plus opportunity costs .

Let it be and keep on going! Acceptance and daily occupational well-being in relation to negative work events.

Science.gov (United States)

Kuba, Katharina; Scheibe, Susanne

2017-01-01

[Correction Notice: An Erratum for this article was reported in Vol 22(1) of Journal of Occupational Health Psychology (see record 2016-25216-001). In the article, there were errors in the Participants subsection in the Method section. The last three sentences should read "Job tenure ranged from less than 1 year to 32 years, with an average of 8.83 years (SD 7.80). Participants interacted with clients on average 5.44 hr a day (SD 2.41). The mean working time was 7.36 hr per day (SD 1.91)."] Negative work events can diminish daily occupational well-being, yet the degree to which they do so depends on the way in which people deal with their emotions. The aim of the current study was to examine the role of acceptance in the link between daily negative work events and occupational well-being. We hypothesized that acceptance would be associated with better daily occupational well-being, operationalized as low end-of-day negative emotions and fatigue, and high work engagement. Furthermore, we predicted that acceptance would buffer the adverse impact of negative work events on daily well-being. A microlongitudinal study across 10 work days was carried out with 92 employees of the health care sector, yielding a total of 832 daily observations. As expected, acceptance was associated with lower end-of-day negative emotions and fatigue (though there was no association with work engagement) across the 10-day period. Furthermore, acceptance moderated the effect of negative event occurrence on daily well-being: Highly accepting employees experienced less increase in negative emotions and less reduction in work engagement (though comparable end-of-day fatigue) on days with negative work events, relative to days without negative work events, than did less accepting employees. These findings highlight affective, resource-saving, and motivational benefits of acceptance for daily occupational well-being and demonstrate that acceptance is associated with enhanced resilience to daily

Validity, reliability, feasibility, acceptability and educational impact of direct observation of procedural skills (DOPS).

Science.gov (United States)

Naeem, Naghma

2013-01-01

Direct observation of procedural skills (DOPS) is a new workplace assessment tool. The aim of this narrative review of literature is to summarize the available evidence about the validity, reliability, feasibility, acceptability and educational impact of DOPS. A PubMed database and Google search of the literature on DOPS published from January 2000 to January 2012 was conducted which yielded 30 articles. Thirteen articles were selected for full text reading and review. In the reviewed literature, DOPS was found to be a useful tool for assessment of procedural skills, but further research is required to prove its utility as a workplace based assessment instrument.

Realizing energy infrastructure projects – A qualitative empirical analysis of local practices to address social acceptance

International Nuclear Information System (INIS)

Friedl, Christina; Reichl, Johannes

2016-01-01

The federal state of Upper Austria, at a crossing point for European energy grids, provides large-scale resources for storage of natural gas and is among the top infrastructures in this regard in Europe. Considering the ambitious plans for enhancements of energy infrastructures in this region, the issue of social acceptance of energy infrastructure is crucial. To foster an understanding of the challenges inherent in this issue we present an analysis concentrating on the social acceptance of energy infrastructure projects in Upper Austria. This paper addresses the issues with realizing energy infrastructure projects and analyzes the problems and benefits based on an empirical–qualitative study comprising expert interviews, discussions with stakeholders, and a round table workshop integrating the disparate viewpoints. The aim of the process was to integrate different attitudes, perspectives and positions of relevant stakeholders, members of citizens’ initiatives, environmental organizations and of the national government and local authorities. The results presented are based on both the analysis of the empirical–qualitative data and the existing studies and literature on social acceptance. The qualitative research compares experiences and current practices with social acceptance issues (like frameworks, participation, communication strategies) in a set of considered energy infrastructure projects. - Highlights: • Relates evidence of the effects of local resistance to Upper Austrian infrastructure projects. • We use a qualitative analysis to gain a holistic understanding of the social acceptance issue. • Acceptance is hampered by political, legal, institutional and procedural frameworks. • The issues of participation and communication play a key role.

Small bore pipe acceptance criteria for watts bar nuclear plant Tennessee Valley Authority

International Nuclear Information System (INIS)

Sun, W.S.; Lee, R.L.; Kalyanan, N.

1991-01-01

Small bore pipe (≤2 inches NPS) is traditionally analyzed by simplified techniques using Cook Book approach, which yield conservative results. However, reconciliation of these systems for as-built condition where the original criteria is observed to have been exceeded (or due to additions etc.) generally becomes a time consuming and expensive operation since a rigorous computer aided analysis or a detailed hand calculation becomes necessary. The acceptance criteria in this paper can be effectively used in such cases. The approach involves utilizing basic engineering principles and plant specific parameters (such as earthquake spectra) to estimate the system response such as pipe stress due to various loading conditions, piping frequency, support and anchor loads, valve acceleration etc

Consumers' acceptance of innovations in traditional cheese. A comparative study in France and Norway.

Science.gov (United States)

Almli, Valérie Lengard; Naes, Tormod; Enderli, Géraldine; Sulmont-Rossé, Claire; Issanchou, Sylvie; Hersleth, Margrethe

2011-08-01

This study explores consumers' acceptance of innovations in traditional cheese in France (n=120) and Norway (n=119). The respondents were presented with 16 photographs of a traditional cheese from their respective countries, varying according to six factors: pasteurisation, organic production, omega-3, packaging, price and appropriateness. For each of the scenarios the consumers indicated their willingness to buy the cheese on a nine-point scale. Results show that consumers' willingness to buy traditional cheese is highly driven by price, appropriateness and pasteurisation in both countries. However, on average consumers in the French sample prefer buying raw milk cheese, while consumers in the Norwegian sample prefer buying pasteurised cheese. These general trends are led by a pro-raw milk segment in France and a pro-pasteurised milk segment in Norway. Several interaction effects involving appropriateness are detected, indicating the importance of the consumption context on the acceptance of innovations in traditional cheese. On a general level, the results indicate that well-accepted innovations in traditional cheese are those that reinforce the traditional and authentic character of the product. Copyright © 2011 Elsevier Ltd. All rights reserved.

Biodiesel Production from Vegetable Oil over Plasma Reactor: Optimization of Biodiesel Yield using Response Surface Methodology

Directory of Open Access Journals (Sweden)

Istadi Istadi

2009-06-01

Full Text Available Biodiesel production has received considerable attention in the recent past as a renewable fuel. The production of biodiesel by conventional transesterification process employs alkali or acid catalyst and has been industrially accepted for its high conversion and reaction rates. However for alkali catalyst, there may be risk of free acid or water contamination and soap formation is likely to take place which makes the separation process difficult. Although yield is high, the acids, being corrosive, may cause damage to the equipment and the reaction rate was also observed to be low. This research focuses on empirical modeling and optimization for the biodiesel production over plasma reactor. The plasma reactor technology is more promising than the conventional catalytic processes due to the reducing reaction time and easy in product separation. Copyright (c 2009 by BCREC. All Rights reserved.[Received: 10 August 2009, Revised: 5 September 2009, Accepted: 12 October 2009][How to Cite: I. Istadi, D.D. Anggoro, P. Marwoto, S. Suherman, B.T. Nugroho (2009. Biodiesel Production from Vegetable Oil over Plasma Reactor: Optimization of Biodiesel Yield using Response Surface Methodology. Bulletin of Chemical Reaction Engineering and Catalysis, 4(1: 23-31.  doi:10.9767/bcrec.4.1.7115.23-31][How to Link/ DOI: http://dx.doi.org/10.9767/bcrec.4.1.7115.23-31 || or local: http://ejournal.undip.ac.id/index.php/bcrec/article/view/7115

Consumers' acceptance of medicinal herbs: An application of the technology acceptance model (TAM).

Science.gov (United States)

Jokar, Nargesh Khatun; Noorhosseini, Seyyed Ali; Allahyari, Mohammad Sadegh; Damalas, Christos A

2017-07-31

The shift in consumers' preferences from synthetic to 'natural' products has led to a resurgence of interest in medicinal plants, particularly in developing countries. However, research data about consumers' preferences for particular products is hard to find. The main objective of this study was to contribute to the general understanding of consumers' intention for selecting medicinal herbs for consumption. Factors underpinning consumers' acceptance of medicinal herbs were studied with the technology acceptance model (TAM) in Rasht City of Iran using a structured questionnaire. Most respondents had low to moderate familiarity with consumption of medicinal herbs. However, about half of the respondents (47.5%) showed a high level of acceptance of medicinal herbs. Herbs like spearmint (Mentha spicata L.), spinach (Spinacia oleracea L.), basil (Ocimum basilicum L.), Damask rose (Rosa × damascena Herrm.), saffron (Crocus sativus L.), cinnamon (Cinnamomum verum J.Presl), flixweed [Descurainia sophia (L.) Webb ex Prantl], red feathers (Echium amoenum Fisch. & C.A.Mey.), and green tea [Camellia sinensis (L.) Kuntze] had the highest consumption rate among the majority (over 75%) of citizens of Rasht. The highest rate of perceived usefulness of medicinal herbs was related to their perceived role in healing diseases. The variable of importance of use of medicinal herbs had the strongest direct effect and the variables of perceived usefulness and attitude towards use had the second and third strongest direct effect on the acceptance of medicinal herbs' use at p acceptance of medicinal herbs and may serve as a benchmark for future research and evaluation concerning the use of medicinal herbs over time. For plant producers, more effective and targeted crop development should be encouraged, whereas for retailers better marketing and delivery strategies should be sought. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

Cone penetrometer acceptance test report

Energy Technology Data Exchange (ETDEWEB)

Boechler, G.N.

1996-09-19

This Acceptance Test Report (ATR) documents the results of acceptance test procedure WHC-SD-WM-ATR-151. Included in this report is a summary of the tests, the results and issues, the signature and sign- off ATP pages, and a summarized table of the specification vs. ATP section that satisfied the specification.

Understanding Retailers’ Acceptance of Virtual Stores

OpenAIRE

Irene Y.L. Chen

2010-01-01

The acceptance of e-commerce among consumers has stimulated the rise of virtual stores. Increasing traditional retailers or people who do not have sufficient capital for maintaining a brick-and-mortar store have considered using virtual stores to reach global market. In the e-commerce literature, there has been rich research evidence concerning consumers’ acceptance of virtual stores. However, rigorous academic research on retailers’ acceptance of virtual stores is relatively scarce today. Th...

Perceptions of acceptable conducts by university students.

Science.gov (United States)

Marques, Dora Nazaré; Macedo, António Filipe

2016-01-01

To determine perceptions of acceptable conducts amongst under and postgraduate optometry students and to compare them with students from other disciplines. Students (under/postgraduate) of optometry (n=156) and other courses (n=54) from University of Minho participated in a voluntary online questionnaire about perception of conducts, classifying as acceptable or unacceptable 15 academic or professional scenarios. 210 questionnaires were analyzed. Differences in perceptions were found between optometry under and postgraduates in scenario 5, Chi-square(2,156)=4.3, p=0.038, and scenario 7, Chi-square(2,156)=7.0, p=0.008 (both with cheating more acceptable for postgrads). Differences between under and postgraduates from other courses were found in scenario 9 (taking supplies from classroom more acceptable for undergrads), Chi-square(1,54)=5.0, p=0.025, and scenario 14 (forging a signature more acceptable for postgrads), Chi-square(1,54)=3.9, p=0.046. Differences between optometry and other courses undergraduates were observed in scenario 2 (plagiarism more acceptable for optometry undergrads), Chi-square(1,154)=8.3, p=0.004 and scenario 9 (taking supplies from classroom more acceptable for other undergrads), chi-square(1,54)=7.8, p=0.005. Differences between optometry and other courses postgraduates were observed in scenario 7, Chi-square(1,56)=5.8, p=0.016, scenario 10 (both with cheating more acceptable for optometry postgrads), chi-square(1,54)=8.1, p=0.004 and scenario 14 (forging a signature more acceptable for other postgrads), Chi-square(1,54)=6.1, p=0.026. Academic misconducts were mainly considered more acceptable than professional misconducts. Our results show that perceptions of acceptable conducts amongst optometry students are not very different from other students, and, against our initial prediction, do not show a general change in misconduct perception when students become more mature. Universities should pay more attention to this problem and take

Influence of oak maturation regimen on composition, sensory properties, quality, and consumer acceptability of cabernet sauvignon wines.

Science.gov (United States)

Crump, Anna M; Johnson, Trent E; Wilkinson, Kerry L; Bastian, Susan E P

2015-02-11

Oak barrels have long been the preferred method for oak maturation of wine, but barrels contribute significantly to production costs, so alternate oak maturation regimens have been introduced, particularly for wines at lower price points. To date, few studies have investigated consumers' acceptance of wines made using non-traditional oak treatments. In this study, two Cabernet Sauvignon wines were aged using traditional (i.e., barrel) and/or alternative (i.e., stainless steel or plastic tanks and vats, with oak wood added) maturation regimens. Chemical and sensory analyses were subsequently performed to determine the influence on wine composition and sensory properties, that is, the presence of key oak-derived volatile compounds and perceptible oak aromas and flavor. The quality of a subset of wines was rated by a panel of 10 wine experts using a 20-point scoring system, with all wines considered technically sound. Consumer acceptance of wines was also determined. Hedonic ratings ranged from 5.7 to 5.9 (on a 9-point scale), indicating there was no significant difference in consumers' overall liking of each wine. However, segmentation based on individual liking scores identified three distinct clusters comprising consumers with considerably different wine preferences. These results justify wine producers' use of alternative oak maturation regimens to achieve wine styles that appeal to different segments of their target market.

Building optimal regression tree by ant colony system-genetic algorithm: Application to modeling of melting points

Energy Technology Data Exchange (ETDEWEB)

Hemmateenejad, Bahram, E-mail: hemmatb@sums.ac.ir [Department of Chemistry, Shiraz University, Shiraz (Iran, Islamic Republic of); Medicinal and Natural Products Chemistry Research Center, Shiraz University of Medical Sciences, Shiraz (Iran, Islamic Republic of); Shamsipur, Mojtaba [Department of Chemistry, Razi University, Kermanshah (Iran, Islamic Republic of); Zare-Shahabadi, Vali [Young Researchers Club, Mahshahr Branch, Islamic Azad University, Mahshahr (Iran, Islamic Republic of); Akhond, Morteza [Department of Chemistry, Shiraz University, Shiraz (Iran, Islamic Republic of)

2011-10-17

Highlights: {yields} Ant colony systems help to build optimum classification and regression trees. {yields} Using of genetic algorithm operators in ant colony systems resulted in more appropriate models. {yields} Variable selection in each terminal node of the tree gives promising results. {yields} CART-ACS-GA could model the melting point of organic materials with prediction errors lower than previous models. - Abstract: The classification and regression trees (CART) possess the advantage of being able to handle large data sets and yield readily interpretable models. A conventional method of building a regression tree is recursive partitioning, which results in a good but not optimal tree. Ant colony system (ACS), which is a meta-heuristic algorithm and derived from the observation of real ants, can be used to overcome this problem. The purpose of this study was to explore the use of CART and its combination with ACS for modeling of melting points of a large variety of chemical compounds. Genetic algorithm (GA) operators (e.g., cross averring and mutation operators) were combined with ACS algorithm to select the best solution model. In addition, at each terminal node of the resulted tree, variable selection was done by ACS-GA algorithm to build an appropriate partial least squares (PLS) model. To test the ability of the resulted tree, a set of approximately 4173 structures and their melting points were used (3000 compounds as training set and 1173 as validation set). Further, an external test set containing of 277 drugs was used to validate the prediction ability of the tree. Comparison of the results obtained from both trees showed that the tree constructed by ACS-GA algorithm performs better than that produced by recursive partitioning procedure.

The metabolic costs of improving ethanol yield by reducing glycerol formation capacity under anaerobic conditions in Saccharomyces cerevisiae.

Science.gov (United States)

Pagliardini, Julien; Hubmann, Georg; Alfenore, Sandrine; Nevoigt, Elke; Bideaux, Carine; Guillouet, Stephane E

2013-03-28

Finely regulating the carbon flux through the glycerol pathway by regulating the expression of the rate controlling enzyme, glycerol-3-phosphate dehydrogenase (GPDH), has been a promising approach to redirect carbon from glycerol to ethanol and thereby increasing the ethanol yield in ethanol production. Here, strains engineered in the promoter of GPD1 and deleted in GPD2 were used to investigate the possibility of reducing glycerol production of Saccharomyces cerevisiae without jeopardising its ability to cope with process stress during ethanol production. For this purpose, the mutant strains TEFmut7 and TEFmut2 with different GPD1 residual expression were studied in Very High Ethanol Performance (VHEP) fed-batch process under anaerobic conditions. Both strains showed a drastic reduction of the glycerol yield by 44 and 61% while the ethanol yield improved by 2 and 7% respectively. TEFmut2 strain showing the highest ethanol yield was accompanied by a 28% reduction of the biomass yield. The modulation of the glycerol formation led to profound redox and energetic changes resulting in a reduction of the ATP yield (YATP) and a modulation of the production of organic acids (acetate, pyruvate and succinate). Those metabolic rearrangements resulted in a loss of ethanol and stress tolerance of the mutants, contrarily to what was previously observed under aerobiosis. This work demonstrates the potential of fine-tuned pathway engineering, particularly when a compromise has to be found between high product yield on one hand and acceptable growth, productivity and stress resistance on the other hand. Previous study showed that, contrarily to anaerobiosis, the resulting gain in ethanol yield was accompanied with no loss of ethanol tolerance under aerobiosis. Moreover those mutants were still able to produce up to 90 gl-1 ethanol in an anaerobic SSF process. Fine tuning metabolic strategy may then open encouraging possibilities for further developing robust strains with improved

1991 Acceptance priority ranking

International Nuclear Information System (INIS)

1991-12-01

The Standard Contract for Disposal of Spent Nuclear Fuel and/or High- Level Radioactive Waste (10 CFR Part 961) that the Department of Energy (DOE) has executed with the owners and generators of civilian spent nuclear fuel requires annual publication of the Acceptance Priority Ranking (APR). The 1991 APR details the order in which DOE will allocate Federal waste acceptance capacity. As required by the Standard Contract, the ranking is based on the age of permanently discharged spent nuclear fuel (SNF), with the owners of the oldest SNF, on an industry-wide basis, given the highest priority. the 1991 APR will be the basis for the annual allocation of waste acceptance capacity to the Purchasers in the 1991 Annual Capacity Report (ACR), to be issued later this year. This document is based on SNF discharges as of December 31, 1990, and reflects Purchaser comments and corrections, as appropriate, to the draft APR issued on May 15, 1991

Influence of different extraction methods on the yield and linalool content of the extracts of Eugenia uniflora L.

Science.gov (United States)

Galhiane, Mário S; Rissato, Sandra R; Chierice, Gilberto O; Almeida, Marcos V; Silva, Letícia C

2006-09-15

This work has been developed using a sylvestral fruit tree, native to the Brazilian forest, the Eugenia uniflora L., one of the Mirtaceae family. The main goal of the analytical study was focused on extraction methods themselves. The method development pointed to the Clevenger extraction as the best yield in relation to SFE and Soxhlet. The SFE method presented a good yield but showed a big amount of components in the final extract, demonstrating low selectivity. The essential oil extracted was analyzed by GC/FID showing a large range of polarity and boiling point compounds, where linalool, a widely used compound, was identified. Furthermore, an analytical solid phase extraction method was used to clean it up and obtain separated classes of compounds that were fractionated and studied by GC/FID and GC/MS.

Perceptions and Acceptance of Desalinated Seawater for Irrigation: A Case Study in the Níjar District (Southeast Spain

Directory of Open Access Journals (Sweden)

José A. Aznar-Sánchez

2017-06-01

Full Text Available In the context of increasing demand for irrigation water—but, at the same time, with the constraints in the supply from traditional resources—desalinated seawater has been recognized as one of the alternative sources of water to increase the supply for agricultural irrigation. However, its use among farmers has not yet started to expand. Policy makers need to understand what is causing the low acceptance levels of farmers, and how their attitudes could be improved. This is the first study that has conducted an analysis of farmers’ perceptions and acceptance of the use of desalinated seawater for irrigation. The study is based on collected data from a survey completed by farmers in southeastern Spain who do not use desalinated seawater. The main results indicate that desalinated seawater as a water supply source has the lowest acceptance level for farmers. Barriers for its use are price, the need for additional fertilization, and the perception that it would negatively affect the yield and crop quality. The farmers’ general level of knowledge about the impact of using desalinated seawater in agriculture is extremely low. Furthermore, farmers consider it a priority that their startup investment should be subsidized and that water prices should be reduced. Based on the study findings, this paper makes recommendations for the decision-making process in order to improve farmers’ acceptance levels.

Acceptance testing and quality assurance of Simulix evolution radiotherapy simulator

International Nuclear Information System (INIS)

Sinha, Ashutosh; Singh, Navin; Gurjar, Om Prakash; Bagdare, Priyusha

2015-01-01

The success of radiotherapy depends on precise treatment simulation and proper patient positioning. The simulator is a conventional radiographic and fluoroscopic system which emulates the geometrical positions of radiotherapy treatment unit. Hence, the acceptance tests and quality assurance (QA) of the simulator are important prior to its commissioning for the safe and precise clinical use. The verification of mechanical and optical readouts, field size, isocenter, optical and radiation field congruence were performed. The X-ray beam parameters were tested for kVp, mAs and consistency of radiation output. The flat panel detector performance was checked with respect to resolution, low contrast sensitivity (LCS), automatic dose rate control (ADRC), and gray image resolution (GIR). Gantry, table, and imaging system collision possibility was checked. Radiation survey around the room was also performed. The field size test for digital readout and on graph paper, the results of isocenter checkup for rotation of gantry, collimator, and couch, and the deviations observed in auto stop for various movements were found within the tolerance limits. Optical field and radiation field was found congruent. All the lasers were found aligned with the established isocenter. Maximum deviation for set and measured kV was found to be 3% in fluoro mode. The maximum deviation observed in mAs was 1.5% in 3-point as well as in 2-point film exposed mode. The X-ray output was found consistent. The results of tests for resolution, LCS, ADRC, and GIR of the flat panel detector were within tolerance limits. All the six safety interlocks were found working. Radiation level around the room was found within the acceptable limits. All the tests carried out were found within the tolerance limits. The data which has been taken in this study will provide basic support to the routine QA of the simulator. (author)

Measuring Technology Acceptance Level of Turkish Pre-Service English Teachers by Using Technology Acceptance Model

Science.gov (United States)

Kirmizi, Özkan

2014-01-01

The aim of this study is to investigate technology acceptance of prospective English teachers by using Technology Acceptance Model (TAM) in Turkish context. The study is based on Structural Equation Model (SEM). The participants of the study from English Language Teaching Departments of Hacettepe, Gazi and Baskent Universities. The participants…

Identification of permit and waste acceptance criteria provisions requiring modification for acceptance of commercial mixed waste

International Nuclear Information System (INIS)

1994-03-01

In October 1990, representatives of States and compact regions requested that the US Department of Energy (DOE) explore an agreement with host States and compact regions under which DOE would accept commercial mixed low-level radioactive waste (LLW) at DOE's own treatment and disposal facilities. A program for DOE management of commercial mixed waste is made potentially more attractive in light of the low commercial mixed waste volumes, high regulatory burdens, public opposition to new disposal sites, and relatively high cost of constructing commercial disposal facilities. Several studies were identified as essential in determining the feasibility of DOE accepting commercial mixed waste for disposal. The purpose of this report is to identify any current or proposed waste acceptance criteria (WAC) or Resource Conservation and Recovery Act (RCRA) provisions that would have to be modified for commercial mixed waste acceptance at specified DOE facilities. Following the introduction, Section 2 of this report (a) provides a background summary of existing and proposed mixed waste disposal facilities at each DOE site, and (b) summarizes the status of any RCRA Part B permit and WAC provisions relating to the disposal of mixed waste, including provisions relating to acceptance of offsite waste. Section 3 provides overall conclusions regarding the current status and permit modifications that must be implemented in order to grant DOE sites authority under their permits to accept commercial mixed waste for disposal. Section 4 contains a list of references

Patient acceptance of awake craniotomy.

Science.gov (United States)

Wrede, Karsten H; Stieglitz, Lennart H; Fiferna, Antje; Karst, Matthias; Gerganov, Venelin M; Samii, Madjid; von Gösseln, Hans-Henning; Lüdemann, Wolf O

2011-12-01

The aim of this study was to objectively assess the patients' acceptance for awake craniotomy in a group of neurosurgical patients, who underwent this procedure for removal of lesions in or close to eloquent brain areas. Patients acceptance for awake craniotomy under local anesthesia and conscious sedation was assessed by a formal questionnaire (PPP33), initially developed for general surgery patients. The results are compared to a group of patients who had brain surgery under general anesthesia and to previously published data. The awake craniotomy (AC) group consisted of 37 male and 9 female patients (48 craniotomies) with age ranging from 18 to 71 years. The general anesthesia (GA) group consisted of 26 male and 15 female patients (43 craniotomies) with age ranging from 26 to 83 years. All patients in the study were included in the questionnaire analysis. In comparison to GA the overall PPP33 score for AC was higher (p=0.07), suggesting better overall acceptance for AC. The subscale scores for AC were also significantly better compared to GA for the two subscales "postoperative pain" (p=0.02) and "physical disorders" (p=0.01) and equal for the other 6 subscales. The results of the overall mean score and the scores for the subscales of the PPP33 questionnaire verify good patients' acceptance for AC. Previous studies have shown good patients' acceptance for awake craniotomy, but only a few times using formal approaches. By utilizing a formal questionnaire we could verify good patient acceptance for awake craniotomy for the treatment of brain tumors in or close to eloquent areas. This is a novel approach that substantiates previously published experiences. Copyright © 2011 Elsevier B.V. All rights reserved.

Pregnancy planning and acceptance among Danish pregnant women

DEFF Research Database (Denmark)

Rasch, V; Knudsen, L B; Wielandt, H

2001-01-01

OBJECTIVE: To study how living conditions influence pregnancy planning and acceptance among Danish women. METHOD: A cross-sectional questionnaire study performed among 3516 pregnant women attending Odense University Hospital, Denmark. The study population consisted of women with spontaneous...... abortion, women with ectopic pregnancies, women attending antenatal care and women with induced abortion. They were divided into four groups: women with planned and accepted pregnancies (accepting planners, n=2137), women who accepted an initially unplanned pregnancy (accepting non-planners, n=1006), women...... who rejected an initially planned pregnancy (rejecting planners, n=31), and women with unplanned and rejected pregnancies (rejecting non-planners, n=342). The association between socio-economic characteristics and pregnancy planning and acceptance was evaluated by comparing accepting non...

What factors determine therapists' acceptance of new technologies for rehabilitation – a study using the Unified Theory of Acceptance and Use of Technology (UTAUT).

Science.gov (United States)

Liu, Lili; Miguel Cruz, Antonio; Rios Rincon, Adriana; Buttar, Vickie; Ranson, Quentin; Goertzen, Darrell

2015-01-01

The aim of this study was to examine what factors affect the acceptance behavior and use of new technologies for rehabilitation by therapists at a large rehabilitation hospital in Canada. A self-administrated paper-based survey was created by adapting scales with high levels of internal consistency in prior research using the Unified Theory of Acceptance and Use of Technology (UTAUT). Items were scored on a 7-point Likert scale, ranging from "strongly disagree (1)" to "strongly agree (7)". The target population was all occupational therapists (OT) and physical therapists (PT) involved with the provision of therapeutic interventions at the hospital. Our research model was tested using partial least squares (PLS) technique. Performance expectancy was the strongest salient construct for behavioral intention to use new technologies in rehabilitation, whereas neither effort expectancy nor social influence were salient constructs for behavioral intention to use new technologies; (4) facilitating condition and behavioral intention to use new technologies were salient constructs for current use of new technologies in rehabilitation, with facilitating condition the strongest salient for current use of new technologies in rehabilitation. In a large rehabilitation hospital where use of new technologies in rehabilitation is not mandatory, performance expectancy, or how the technology can help in therapists' work, was the most important factor in determining therapists' acceptance and use of technologies. However, effort expectancy and social influence constructs were not important, i.e. therapists were not influenced by the degree of difficulty or social pressures to use technologies. Behavioral intention and facilitating condition, or institutional support, are related to current use of new technologies in rehabilitation.

Worldwide nuclear revival and acceptance

International Nuclear Information System (INIS)

Geraets, Luc H.; Crommelynck, Yves A.

2009-01-01

The current status and trends of the nuclear revival in Europe and abroad are outlined. The development of public opinion in the last decade is playing an important part. This has turned from clear rejection to careful acceptance. Transparency and open communication will be important aspects in the further development of nuclear acceptance. (orig.)

A kidney offer acceptance decision tool to inform the decision to accept an offer or wait for a better kidney.

Science.gov (United States)

Wey, Andrew; Salkowski, Nicholas; Kremers, Walter K; Schaffhausen, Cory R; Kasiske, Bertram L; Israni, Ajay K; Snyder, Jon J

2018-04-01

We developed a kidney offer acceptance decision tool to predict the probability of graft survival and patient survival for first-time kidney-alone candidates after an offer is accepted or declined, and we characterized the effect of restricting the donor pool with a maximum acceptable kidney donor profile index (KDPI). For accepted offers, Cox proportional hazards models estimated these probabilities using transplanted kidneys. For declined offers, these probabilities were estimated by considering the experience of similar candidates who declined offers and the probability that declining would lead to these outcomes. We randomly selected 5000 declined offers and estimated these probabilities 3 years post-offer had the offers been accepted or declined. Predicted outcomes for declined offers were well calibrated (offers been accepted, the probabilities of graft survival and patient survival were typically higher. However, these advantages attenuated or disappeared with higher KDPI, candidate priority, and local donor supply. Donor pool restrictions were associated with worse 3-year outcomes, especially for candidates with high allocation priority. The kidney offer acceptance decision tool could inform offer acceptance by characterizing the potential risk-benefit trade-off associated with accepting or declining an offer. © 2017 The American Society of Transplantation and the American Society of Transplant Surgeons.

Nutrient Content And Acceptability Of Snakehead-Fish (Ophiocephalus Striatus) And Pumpkin (Cucurbita Moschata) Based Complementary Foods

Science.gov (United States)

Ratna Noer, Etika; Candra, Aryu; Panunggal, Binar

2017-02-01

Poor nutrient-dense complementary foods is one of the common factors contributed for decline growth pattern in children. Snakehead-fish and Pumpkin Complementary Feeding (SPCF) base on locally food can help to reduce child malnutrition. Specifically, high protein and vitamin A in SPCF may improve immunity and nutrition status of malnutrition children. This study aimed to formulate low-cost, nutritive value and acceptable of SPCF on malnutrition children in coastal area. Carbohydrate content was determined by difference, protein by Kjeldahl, betacaroten by spectofotometri and sensory evaluation using a five point hedonic scale. Fe and zinc was determined by AAS. There is an effect of the substitution of snake-head fish flour and yellow pumpkin flour toward the nutrient content and the acceptability

Effect of sulfur and iron fertilizers on yield, yield components and ...

African Journals Online (AJOL)

Jane

2011-06-13

Jun 13, 2011 ... per plant. Interaction between water stress and combination of iron and sulfur fertilizers had significant .... Results of analysis of variance (ANOVA) of water stress (W), sulfur (B) and iron (C), and their interaction with gain yield, yield components and ... the soil structure and it increased the usefulness of other.

Effect of water stress on yield and yield components of sunflower ...

African Journals Online (AJOL)