Usability and acceptance evaluation of ACESO: a Web-based breast cancer survivorship tool.

Science.gov (United States)

Kapoor, Akshat; Nambisan, Priya

2018-01-25

The specific objective of this research is to design and develop a personalized Web application to support breast cancer survivors after treatment, as they deal with post-treatment challenges, such as comorbidities and side effects of treatment. A mixed-methods approach, utilizing a combination of think-aloud analysis, personal interviews, and surveys, was adopted for user acceptance and usability testing among a group of breast cancer survivors. User feedback was gathered on their perceived value of the application, and any user-interface issues that may hinder the overall usability were identified. The application's portability and capability of organizing their entire breast cancer-related medical history as well as tracking various quality of life indicators were perceived to be valuable features. The application had an overall high usability; however, certain sections of the application were not as intuitive to locate. Visual elements of the website were appreciated; however, overall experience would benefit from incorporating more sociable elements that exhibit positive re-enforcement within the end user and provide a friendlier experience. The results of the study showcase the need for more personalized tools and resources to support survivors in self-management. It also demonstrates the ability to integrate breast cancer survivorship care plans from diverse providers and paves the way to add further value-added features in consumer health applications, such as personal decision support. Using a personal decision support-based tool can serve as a training tool and resource, providing these patients with pertinent information about the various aspects of their long-term health, while educating them about any related side effects and symptoms. It is hoped that making such tools more accessible could help in engaging survivors to play an active role in managing their health and encourage shared decision-making with their providers.

Comparison of four different mobile devices for measuring heart rate and ECG with respect to aspects of usability and acceptance by older people.

Science.gov (United States)

Ehmen, Hilko; Haesner, Marten; Steinke, Ines; Dorn, Mario; Gövercin, Mehmet; Steinhagen-Thiessen, Elisabeth

2012-05-01

In the area of product design and usability, most products are developed for the mass-market by technically oriented designers and developers for use by persons who themselves are also technically adept by today's standards. The demands of older people are commonly not given sufficient consideration within the early developmental process. In the present study, the usability and acceptability of four different devices meant to be worn for the measurement of heart rate or ECG were analyzed on the basis of qualitative subjective user ratings and structured interviews of twelve older participants. The data suggest that there was a relatively high acceptance concerning these belts by older adults but none of the four harnesses was completely usable. Especially problematic to the point of limiting satisfaction among older subjects were problems encountered while adjusting the length of the belt and/or closing the locking mechanism. The two devices intended for dedicated heart rate recording yielded the highest user ratings for design, and were clearly preferred for extended wearing time. Yet for all the devices participants identified several important deficiencies in their design, as well as suggestions for improvement. We conclude that the creation of an acceptable monitoring device for older persons requires designers and developers to consider the special demands and abilities of the target group. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The acceptability of an Internet-based exposure treatment for flying phobia with and without therapist guidance: patients’ expectations, satisfaction, treatment preferences, and usability

Science.gov (United States)

Campos, Daniel; Mira, Adriana; Bretón-López, Juana; Castilla, Diana; Botella, Cristina; Baños, Rosa Maria; Quero, Soledad

2018-01-01

Purpose Internet-based treatments have been tested for several psychological disorders. However, few studies have directly assessed the acceptability of these self-applied interventions in terms of expectations, satisfaction, treatment preferences, and usability. Moreover, no studies provide this type of data on Internet-based treatment for flying phobia (FP), with or without therapist guidance. The aim of this study was to analyze the acceptability of an Internet-based treatment for FP (NO-FEAR Airlines) that includes exposure scenarios composed of images and real sounds. A secondary aim was to compare patients’ acceptance of two ways of delivering this treatment (with or without therapist guidance). Patients and methods The sample included 46 participants from a randomized controlled trial who had received the self-applied intervention with (n = 23) or without (n = 23) therapist guidance. All participants completed an assessment protocol conducted online and by telephone at both pre- and posttreatment. Results Results showed good expectations, satisfaction, opinion, and usability, regardless of the presence of therapist guidance, including low aversiveness levels from before to after the intervention. However, participants generally preferred the therapist-supported condition. Conclusion NO-FEAR Airlines is a well-accepted Internet-based treatment that can help enhance the application of the exposure technique, improving patient acceptance and access to FP treatment. PMID:29636613

Acceptability, Usability, and Views on Deployment of Peek, a Mobile Phone mHealth Intervention for Eye Care in Kenya: Qualitative Study.

Science.gov (United States)

Lodhia, Vaishali; Karanja, Sarah; Lees, Shelley; Bastawrous, Andrew

2016-05-09

The Portable Eye Examination Kit (Peek) is a mobile phone-based ophthalmic testing system that has been developed to perform comprehensive eye examinations. Shortages in ophthalmic personnel, the high cost, and the difficulty in transporting equipment have made it challenging to offer services, particularly in rural areas. Peek offers a solution for overcoming barriers of limited access to traditional ophthalmic testing methods and has been pilot tested on adults in Nakuru, Kenya, and compared with traditional eye examination tools. This qualitative study evaluated the acceptability and usability of Peek in addition to perceptions regarding its adoption and nationwide deployment. Semistructured interviews were conducted with patients and analyzed using a framework approach. This included analysis of interviews from 20 patients, 8 health care providers (HCPs), and 4 key decision makers in ophthalmic health care provision in Kenya. The participants were purposefully sampled. The coding structure involved predefined themes for assessing the following: (1) the context, that is, environment, user, task, and technology; (2) patient acceptability, that is, patients' perceived benefits, patient preference, and patient satisfaction; (3) usability, that is, efficiency, effectiveness, learnability, and flexibility and operability of Peek; and (4) the benefits of Peek in strengthening eye care provision, that is, capabilities enhancer, opportunity creator, social enabler, and knowledge generator. Emerging themes relating to the objectives were explored from the data using thematic analysis. Patients found Peek to be acceptable because of its benefits in overcoming the barriers to accessing ophthalmic services. Most thought it to be fast, convenient, and able to reach a large population. All patients expressed being satisfied with Peek. The HCPs perceived it to satisfy the criteria for usability and found Peek to be acceptable based on the technology acceptance model. Peek was

Acceptance, Usability and Usefulness of WebLab-Deusto from the Students Point of View

Directory of Open Access Journals (Sweden)

Jaime Irurzun

2009-02-01

Full Text Available In the engineering curriculum, remote labs are becoming a popular learning tool. The advantages of these laboratories and the different deployments have been analyzed many times, but in this paper we want to show the results of the students’ opinion about WebLab-Deusto as a learning tool. This work is focused on the subjects Programmable Logic (PL in the third year of Electronics Engineering and in Electronics Design (ED of the fifth year of the same degree. The paper presents the results of the surveys done by students since 2004. This survey consists of fifteen questions and its main objective is to measure the acceptance, usability and usefulness of the remote laboratory developed at University of Deusto from the students point of view.

Comparison of marginal accuracy of castings fabricated by conventional casting technique and accelerated casting technique: an in vitro study.

Science.gov (United States)

Reddy, S Srikanth; Revathi, Kakkirala; Reddy, S Kranthikumar

2013-01-01

Conventional casting technique is time consuming when compared to accelerated casting technique. In this study, marginal accuracy of castings fabricated using accelerated and conventional casting technique was compared. 20 wax patterns were fabricated and the marginal discrepancy between the die and patterns were measured using Optical stereomicroscope. Ten wax patterns were used for Conventional casting and the rest for Accelerated casting. A Nickel-Chromium alloy was used for the casting. The castings were measured for marginal discrepancies and compared. Castings fabricated using Conventional casting technique showed less vertical marginal discrepancy than the castings fabricated by Accelerated casting technique. The values were statistically highly significant. Conventional casting technique produced better marginal accuracy when compared to Accelerated casting. The vertical marginal discrepancy produced by the Accelerated casting technique was well within the maximum clinical tolerance limits. Accelerated casting technique can be used to save lab time to fabricate clinical crowns with acceptable vertical marginal discrepancy.

Assessing the acceptability and usability of an interactive serious game in aiding treatment decisions for patients with localized prostate cancer.

Science.gov (United States)

Reichlin, Lindsey; Mani, Nithya; McArthur, Kara; Harris, Amy M; Rajan, Nithin; Dacso, Clifford C

2011-01-12

Men diagnosed with localized prostate cancer face a potentially life-altering treatment decision that can be overwhelming. Enhancing patient knowledge through education can significantly reduce feelings of uncertainty while simultaneously increasing confidence in decision making. Serious games have been shown in other populations to increase health knowledge and assist with the health decision-making process. We developed an interactive serious game, Time After Time, which translates evidence-based treatment outcome data into an accessible and understandable format that men can utilize in their prostate cancer treatment decision-making process. The game specifically aims to raise men's awareness and understanding of the impact of health-related quality of life issues associated with the major treatment options and to enrich their conversations with their health care providers. This study determined the acceptability and usability of the alpha version of Time After Time, an interactive decision aid for men diagnosed with localized prostate cancer, in order to inform future iterations of the serious game. The study employed a mixed methods approach to assess the acceptability and usability of the Time After Time serious game using qualitative focus groups and a quantitative Likert scale survey. A total of 13 men who had already completed treatment for localized prostate cancer completed the survey and participated in focus group meetings. The majority of the study participants rated Time After Time as an appropriate decision tool for localized prostate cancer and verified that it meets its goals of increasing focus on side effects and generating questions for the patient's health care team. However, participants also expressed concerns about game usability and the diversity of information covered regarding treatment options and potential treatment outcomes. Serious games are a promising approach to health education and decision support for older men. Participants

Exploring the value of usability feedback formats

DEFF Research Database (Denmark)

Nørgaard, Mie; Hornbæk, Kasper Anders Søren

2009-01-01

The format used to present feedback from usability evaluations to developers affects whether problems are understood, accepted, and fixed. Yet, little research has investigated which formats are the most effective. We describe an explorative study where three developers assess 40 usability findings...... presented using five feedback formats. Our usability findings comprise 35 problems and 5 positive comments. Data suggest that feedback serves multiple purposes. Initially, feedback must convince developers about the relevance of a problem and convey an understanding of this. Feedback must next be easy...... working with the feedback to address the usability problems, there were no significant differences among the developers' ratings of the value of the different formats. This suggests that all of the formats may serve equally well as reminders in later stages of working with usability problems...

Usability and Acceptability of ASSESS MS: Assessment of Motor Dysfunction in Multiple Sclerosis Using Depth-Sensing Computer Vision.

Science.gov (United States)

Morrison, Cecily; D'Souza, Marcus; Huckvale, Kit; Dorn, Jonas F; Burggraaff, Jessica; Kamm, Christian Philipp; Steinheimer, Saskia Marie; Kontschieder, Peter; Criminisi, Antonio; Uitdehaag, Bernard; Dahlke, Frank; Kappos, Ludwig; Sellen, Abigail

2015-06-24

Sensor-based recordings of human movements are becoming increasingly important for the assessment of motor symptoms in neurological disorders beyond rehabilitative purposes. ASSESS MS is a movement recording and analysis system being developed to automate the classification of motor dysfunction in patients with multiple sclerosis (MS) using depth-sensing computer vision. It aims to provide a more consistent and finer-grained measurement of motor dysfunction than currently possible. To test the usability and acceptability of ASSESS MS with health professionals and patients with MS. A prospective, mixed-methods study was carried out at 3 centers. After a 1-hour training session, a convenience sample of 12 health professionals (6 neurologists and 6 nurses) used ASSESS MS to capture recordings of standardized movements performed by 51 volunteer patients. Metrics for effectiveness, efficiency, and acceptability were defined and used to analyze data captured by ASSESS MS, video recordings of each examination, feedback questionnaires, and follow-up interviews. All health professionals were able to complete recordings using ASSESS MS, achieving high levels of standardization on 3 of 4 metrics (movement performance, lateral positioning, and clear camera view but not distance positioning). Results were unaffected by patients' level of physical or cognitive disability. ASSESS MS was perceived as easy to use by both patients and health professionals with high scores on the Likert-scale questions and positive interview commentary. ASSESS MS was highly acceptable to patients on all dimensions considered, including attitudes to future use, interaction (with health professionals), and overall perceptions of ASSESS MS. Health professionals also accepted ASSESS MS, but with greater ambivalence arising from the need to alter patient interaction styles. There was little variation in results across participating centers, and no differences between neurologists and nurses. In typical

Integrating Usability Evaluations into the Software Development Process

DEFF Research Database (Denmark)

Lizano, Fulvio

as relevant and strategic human–computer interaction (HCI) activities in the software development process, there are obstacles that limit the complete, effective and efficient integration of this kind of testing into the software development process. Two main obstacles are the cost of usability evaluations...... and the software developers' resistance to accepting users’ opinions regarding the lack of usability in their software systems. The ‘cost obstacle’ refers to the constraint of conducting usability evaluations in the software process due to the significant amount of resources required by this type of testing. Some......This thesis addresses the integration of usability evaluations into the software development process. The integration here is contextualized in terms of how to include usability evaluation as an activity in the software development lifecycle. Even though usability evaluations are considered...

A Smartphone App to Promote an Active Lifestyle in Lower-Educated Working Young Adults: Development, Usability, Acceptability, and Feasibility Study.

Science.gov (United States)

Simons, Dorien; De Bourdeaudhuij, Ilse; Clarys, Peter; De Cocker, Katrien; Vandelanotte, Corneel; Deforche, Benedicte

2018-02-20

Physical activity (PA) levels are problematic in lower-educated working young adults (18-26 years). To promote PA, smartphone apps have great potential, but there is no evidence for their effectiveness in this population. To increase the likelihood that a newly developed app will be effective, formative research and user testing are required. The aim of this study was to describe the development, usability, acceptability, and feasibility of a new theory- and evidence-based smartphone app to promote an active lifestyle in lower-educated working young adults. The new app was developed by applying 4 steps. First, determinants important to promote an active lifestyle in this population were selected. Second, evidence-based behavior change techniques were selected to convert the determinants into practical applications. Third, a new smartphone app was developed. Fourth, volunteers (n=11, both lower and higher educated) tested the app on usability, and lower-educated working young adults (n=16) tested its acceptability and feasibility via (think aloud) interviews, a questionnaire, and Google Analytics. The app was accordingly adapted for the final version. A new Android app, Active Coach, was developed that focused on knowledge, attitude, social support, and self-efficacy (based on outcomes from step 1), and that applied self-regulation techniques (based on outcomes from step 2). The app consists of a 9-week program with personal goals, practical tips, and scientific facts to encourage an active lifestyle. To ensure all-day and automatic self-monitoring of the activity behavior, the Active Coach app works in combination with a wearable activity tracker, the Fitbit Charge. Issues detected by the usability test (eg, text errors, wrong messages) were all fixed. The acceptability and feasibility test showed that participants found the app clear, understandable, and motivating, although some aspects needed to be more personal. By applying a stepwise, user-centered approach

Usability study of a novel, self-lighted, disposable speculum: military applications.

Science.gov (United States)

Jones, Christina L; Gruber, Daniel D; Warner, William; Buller, Jerome L

2013-04-01

Data collected from a postutilization questionnaire were used to evaluate the usability of the OfficeSPEC disposable vaginal speculum, specifically the effectiveness, efficiency, and acceptability, in clinical, hospital, and austere environments. Usability data analysis showed the OfficeSPEC speculum had an effectiveness rating of 4.6/5, efficiency rating of 4.5/5, and acceptability rating of 4.6/5; overall usability in deployed environments was favorable. The overall rankings were 3.4 for plastic, 4.2 for metal (p disposable speculum as a reasonable alternative with yearly cost of $129,200, compared to traditional metal ($209,100) and plastic ($319,175). By evaluating the OfficeSPEC speculum within a usability framework, it proved to be practical, viable alternative in all environments, particularly in the forward deployed environment. Reprint & Copyright © 2013 Association of Military Surgeons of the U.S.

Integrated Model for E-Learning Acceptance

Science.gov (United States)

Ramadiani; Rodziah, A.; Hasan, S. M.; Rusli, A.; Noraini, C.

2016-01-01

E-learning is not going to work if the system is not used in accordance with user needs. User Interface is very important to encourage using the application. Many theories had discuss about user interface usability evaluation and technology acceptance separately, actually why we do not make it correlation between interface usability evaluation and user acceptance to enhance e-learning process. Therefore, the evaluation model for e-learning interface acceptance is considered important to investigate. The aim of this study is to propose the integrated e-learning user interface acceptance evaluation model. This model was combined some theories of e-learning interface measurement such as, user learning style, usability evaluation, and the user benefit. We formulated in constructive questionnaires which were shared at 125 English Language School (ELS) students. This research statistics used Structural Equation Model using LISREL v8.80 and MANOVA analysis.

Mechanical properties of ductile cast iron and cast steel for intermediate level waste transport containers

International Nuclear Information System (INIS)

Gray, I.L.S.; Sievwright, R.W.T.; Egid, B.; Ajayi, F.; Donelan, P.

1994-01-01

UK Nirex Ltd is developing Type B re-usable shielded transport containers (RSTCs) in a range of shielding thicknesses to transport intermediate level radioactive waste (ILW) to a deep repository. The designs are of an essentially monolithic construction and rely principally on the plastic flow of their material to absorb the energies involved in impact events. Nirex has investigated the feasibility of manufacturing the RSTCs from ductile cast iron (DCI) or cast steel instead of from forgings, since this would bring advantages of reduced manufacturing time and costs. However, cast materials are perceived to lack toughness and ductility and it is necessary to show that sufficient fracture toughness can be obtained to preclude brittle failure modes, particularly at low temperatures. The mechanical testing carried out as part of that programme is described. It shows how the measured properties have been used to demonstrate avoidance of brittle fracture and provide input to computer modelling of the drop tests. (author)

"Isla Calma", a Novel Virtual Reality Environment for Pain and Anxiety Distraction: Report on Usability, Acceptability, and Subjective Experience.

Science.gov (United States)

Diaz-Orueta, Unai; Alvarado, Sayuri; Gutiérrez, Diego; Climent, Gema; Banterla, Flavio

2012-10-01

This report presents a new virtual reality-based tool named "Isla Calma" (IC), which is based on distracting procedures that facilitate competency among different stimuli and loads the individual's limited attention capabilities. An incidental sample composed of 35 users (42.9 percent female) from northern Spain, with a mean age of 28.21 years (SD=5.67), was recruited to test IC. Tests were held in a room with two deck chairs and one complete set of IC equipment for each of them. A questionnaire with issues about usability, acceptability, game immersion, and subjective experience was administered. Participants did not experience any difficulty in "moving" throughout the island. The map was considered useful by most of the users, and so were the narrator's instructions and voice. Previous experience with technology or with the controller did not affect the usability rates. In terms of acceptability, 92.3 percent of the users reported the wish to use IC again if they had the chance, and 73.6 percent would recommend its use in different medical procedures. In terms of immersion, the difference between actual and perceived time using IC was statistically significant (z=-4,141, P<0.001), with the generalized perception of having used less time than what it was actually required. Preliminary results in dental clinical settings are also presented. IC was seen as a highly relaxing and pain distracting tool with potential clinical applications in different settings. It is expected that future research on IC will provide results on its applicability in different clinical settings.

Kinetics of steel heavy ingot formation in dies of semicontinuous-casting machines

International Nuclear Information System (INIS)

Tsukerman, V.Ya.; Marchenko, I.K.

1986-01-01

Formation kinetics of round section ingot of up to 0.67 m in diameter was analyzed in dies of semicontinuous-casting machines on casting of the most usable assortment steels: medium-carbon low-alloyed and chromium-nickel stainless steels. It is established that solidification coefficient decreases in direct proportion to ingot diameter. Value of different-thickness ingot skin at die outlet is in direct proportion to a casted steel overheating temperature, ingot diameter and inversely proportional to the number and diameter of holes in a ladder nozzle and square root of ingot drawing rate

A usability test is not an interview

DEFF Research Database (Denmark)

Hertzum, Morten

2016-01-01

Usability tests are conducted to gauge users’ experience with a system, preferably before it is released for real use, and thereby find any problems that prevent users from completing their tasks, slow them down, or otherwise degrade their user experience. Such tests are important to successful...... systems development, yet test procedures vary and the quality of test results is sometimes contested. While there is no single accepted procedure for usability specialists to follow when conducting usability tests, these tests normally involve users who think out loud while using a system and an evaluator...... who observes the users’ behavior and listens in on their thoughts. This common core of usability tests is illustrated in Figure 1. The possible variations include, for example, whether the users work individually or in pairs, whether the evaluator is in the room with the user or in an adjoining room...

Properties shaping and repair of selected types of cast iron

Directory of Open Access Journals (Sweden)

J. Szajnar

2007-04-01

Full Text Available The paper presents research results of twofold use of TIG - Tungsten Inert Gas also known as GTA - Gas Tungsten Arc. First is surfacing by welding on cold and hot-cold to repair chromium cast iron with chromium content about 15%. Second is remelting with electric arc of selected gray (with pearlitic matrix and ductile (with ferritic-pearlitic matrix cast iron. Repair of cast iron elements was realized in order to cut out a casting defects. Defects decrease a usability of castings for constructional application and increase a manufacturing costs. Application of surface heat treatment guarantees mechanical properties i.e. hardness and wear resistance improvement. The result of investigations show possibility of castings repair by put on defects a good quality padding welds, which have comparable properties with base material. Use of electric arc surface heat treatment resulted in increase of hardness and wear resistance, which was measured on the basis of ASTM G 65 - 00 standard.

How do Usability Professionals Construe Usability?

DEFF Research Database (Denmark)

Hertzum, Morten; Clemmensen, Torkil

2012-01-01

distinguishing it from user experience. On the basis of repertory-grid interviews with 24 Chinese, Danish, and Indian usability professionals we find that they make use of more utilitarian than experiential, i.e. user-experience related, constructs. This indicates that goal-related performance is central......’ constructs, particularly their experiential constructs, go considerably beyond ISO 9241 usability, indicating a discrepancy between this definition of usability and the thinking of the professionals concerned with delivering usability. Finally, usability is construed rather similarly across the three...

MindSurf: a pilot study to assess the usability and acceptability of a smartphone app designed to promote contentment, wellbeing, and goal achievement.

Science.gov (United States)

Carey, Timothy A; Haviland, Jennifer; Tai, Sara J; Vanags, Thea; Mansell, Warren

2016-12-12

The Method of Levels (MOL) is a transdiagnostic cognitive therapy that promotes contentment, wellbeing, and goal achievement through the resolution of internal conflicts underlying psychological distress. MOL, based on Perceptual Control Theory (PCT), was developed in routine clinical practice and has been used effectively across different health services by different practitioners. Access to MOL-style questions through a smartphone app could, potentially, help both the general public maintain robust mental health, and also be a useful adjunct to therapy for clinical populations. The app is called MindSurf because of its focus on helping people explore their thinking. Prior to developing the app and using it with different populations it was necessary to determine whether such an idea would be usable for and acceptable to potential app users. Therefore, a pilot study was conducted with a non-clinical sample to assess the usability and acceptability of the app including monitoring whether the questions delivered in this way were associated with any adverse events. A pilot study using quantitative as well as qualitative methods and incorporating a repeated measures, A-B design was conducted. The 23 participants were healthy adult volunteers who were all either undergraduate students, postgraduate students, or staff of the University of Manchester. They received MOL-style questions on their mobile phones over a 1-week period. Qualitative results were encouraging and indicated that the format and style of questioning were acceptable to participants and did not lead to increased worry or concern. A one-way, repeated measures ANOVA indicated that there was a nonsignificant decrease in scores on the 21-item Depression, Anxiety, and Stress Scale (DASS21) over a 2 week period. The results of the pilot study justified development of MindSurf and further testing once it is available for use. A power analysis indicated that the pilot study was underpowered to detect

Development of a Wearable Instrumented Vest for Posture Monitoring and System Usability Verification Based on the Technology Acceptance Model.

Science.gov (United States)

Lin, Wen-Yen; Chou, Wen-Cheng; Tsai, Tsai-Hsuan; Lin, Chung-Chih; Lee, Ming-Yih

2016-12-17

Body posture and activity are important indices for assessing health and quality of life, especially for elderly people. Therefore, an easily wearable device or instrumented garment would be valuable for monitoring elderly people's postures and activities to facilitate healthy aging. In particular, such devices should be accepted by elderly people so that they are willing to wear it all the time. This paper presents the design and development of a novel, textile-based, intelligent wearable vest for real-time posture monitoring and emergency warnings. The vest provides a highly portable and low-cost solution that can be used both indoors and outdoors in order to provide long-term care at home, including health promotion, healthy aging assessments, and health abnormality alerts. The usability of the system was verified using a technology acceptance model-based study of 50 elderly people. The results indicated that although elderly people are anxious about some newly developed wearable technologies, they look forward to wearing this instrumented posture-monitoring vest in the future.

Evaluating the Acceptability and Usability of EASEL: A Mobile Application that Supports Guided Reflection for Experiential Learning Activities

Directory of Open Access Journals (Sweden)

Jerry C Schnepp

2017-07-01

Full Text Available Aim/Purpose: To examine the early perceptions (acceptability and usability of EASEL (Education through Application-Supported Experiential Learning, a mobile platform that delivers reflection prompts and content before, during, and after an experiential learning activity. Background: Experiential learning is an active learning approach in which students learn by doing and by reflecting on the experience. This approach to teaching is often used in disciplines such as humanities, business, and medicine. Reflection before, during, and after an experience allows the student to analyze what they learn and why it is important, which is vital in helping them to understand the relevance of the experience. A just-in-time tool (EASEL was needed to facilitate this. Methodology: To inform the development of a mobile application that facilitates real-time guided reflection and to determine the relevant feature set, we conducted a needs analysis with both students and faculty members. Data collected during this stage of the evaluation helped guide the creation of a prototype. The user experience of the prototype and interface interactions were evaluated during the usability phase of the evaluation study. Contribution: Both the needs analysis and usability assessment provided justification for continued development of EASEL as well as insight that guides current development. Findings: The interaction design of EASEL is understandable and usable. Both students and teachers value an application that facilitates real-time guided reflection. Recommendations for Practitioners: The use of a system such as EASEL can leverage time and location-based services to support students in field experiences. This technology aligns with evidence that guided reflection provides opportunities for metacognition. Recommendation for Researchers: Iterative prototyping, testing, and refinement can lead to a deliberate and effective app development process. Impact on Society: The EASEL

Palliative Care Planner: A Pilot Study to Evaluate Acceptability and Usability of an Electronic Health Records System-integrated, Needs-targeted App Platform.

Science.gov (United States)

Cox, Christopher E; Jones, Derek M; Reagan, Wen; Key, Mary D; Chow, Vinca; McFarlin, Jessica; Casarett, David; Creutzfeldt, Claire J; Docherty, Sharron L

2018-01-01

The quality and patient-centeredness of intensive care unit (ICU)-based palliative care delivery is highly variable. To develop and pilot an app platform for clinicians and ICU patients and their family members that enhances the delivery of needs-targeted palliative care. In the development phase of the study, we developed an electronic health record (EHR) system-integrated mobile web app system prototype, PCplanner (Palliative Care Planner). PCplanner screens the EHR for ICU patients meeting any of five prompts (triggers) for palliative care consultation, allows families to report their unmet palliative care needs, and alerts clinicians to these needs. The evaluation phase included a prospective before/after study conducted at a large academic medical center. Two control populations were enrolled in the before period to serve as context for the intervention. First, 25 ICU patients who received palliative care consults served as patient-level controls. Second, 49 family members of ICU patients who received mechanical ventilation for at least 48 hours served as family-level controls. Afterward, 14 patients, 18 family members, and 10 clinicians participated in the intervention evaluation period. Family member outcomes measured at baseline and 4 days later included acceptability (Client Satisfaction Questionnaire [CSQ]), usability (Systems Usability Scale [SUS]), and palliative care needs, assessed with the adapted needs of social nature, existential concerns, symptoms, and therapeutic interaction (NEST) scale; the Patient-Centeredness of Care Scale (PCCS); and the Perceived Stress Scale (PSS). Patient outcomes included frequency of goal concordant treatment, hospital length of stay, and discharge disposition. Family members reported high PCplanner acceptability (mean CSQ, 14.1 [SD, 1.4]) and usability (mean SUS, 21.1 [SD, 1.7]). PCplanner family member recipients experienced a 12.7-unit reduction in NEST score compared with a 3.4-unit increase among controls (P�

Usability of Three Electroencephalogram Headsets for Brain-Computer Interfaces: A Within Subject Comparison

NARCIS (Netherlands)

Gamboa, H.; Nijboer, Femke; van de Laar, B.L.A.; Plácido da Silva, H.; Gilleade, K.; Gerritsen, Steven; Nijholt, Antinus; Bermúdez i Badia, S.; Poel, Mannes; Fairclough, S.

Currently the field of brain–computer interfacing is increasingly focused on developing usable brain–computer interfaces (BCIs) to better ensure technology transfer and acceptance. Many studies have investigated the usability of BCI applications as a whole. Here we aim to investigate one specific

Older Adults' Acceptance of Information Technology

Science.gov (United States)

Wang, Lin; Rau, Pei-Luen Patrick; Salvendy, Gavriel

2011-01-01

This study investigated variables contributing to older adults' information technology acceptance through a survey, which was used to find factors explaining and predicting older adults' information technology acceptance behaviors. Four factors, including needs satisfaction, perceived usability, support availability, and public acceptance, were…

Secondary Waste Cast Stone Waste Form Qualification Testing Plan

Energy Technology Data Exchange (ETDEWEB)

Westsik, Joseph H.; Serne, R. Jeffrey

2012-09-26

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is being constructed to treat the 56 million gallons of radioactive waste stored in 177 underground tanks at the Hanford Site. The WTP includes a pretreatment facility to separate the wastes into high-level waste (HLW) and low-activity waste (LAW) fractions for vitrification and disposal. The LAW will be converted to glass for final disposal at the Integrated Disposal Facility (IDF). Cast Stone – a cementitious waste form, has been selected for solidification of this secondary waste stream after treatment in the ETF. The secondary-waste Cast Stone waste form must be acceptable for disposal in the IDF. This secondary waste Cast Stone waste form qualification testing plan outlines the testing of the waste form and immobilization process to demonstrate that the Cast Stone waste form can comply with the disposal requirements. Specifications for the secondary-waste Cast Stone waste form have not been established. For this testing plan, Cast Stone specifications are derived from specifications for the immobilized LAW glass in the WTP contract, the waste acceptance criteria for the IDF, and the waste acceptance criteria in the IDF Permit issued by the State of Washington. This testing plan outlines the testing needed to demonstrate that the waste form can comply with these waste form specifications and acceptance criteria. The testing program must also demonstrate that the immobilization process can be controlled to consistently provide an acceptable waste form product. This testing plan also outlines the testing needed to provide the technical basis for understanding the long-term performance of the waste form in the disposal environment. These waste form performance data are needed to support performance assessment analyses of the long-term environmental impact of the secondary-waste Cast Stone waste form in the IDF

Expected usability is not a valid indicator of experienced usability

Directory of Open Access Journals (Sweden)

Meinald T. Thielsch

2015-09-01

Full Text Available Usability is a core construct of website evaluation and inherently defined as interactive. Yet, when analysing first impressions of websites, expected usability, i.e., before use, is of interest. Here we investigate to what extend ratings of expected usability are related to (a experienced usability, i.e., ratings after use, and (b objective usability measures, i.e., task performance. Furthermore, we try to elucidate how ratings of expected usability are correlated to aesthetic judgments. In an experiment, 57 participants submitted expected usability ratings after the presentation of website screenshots in three viewing-time conditions (50, 500, and 10,000 ms and after an interactive task (experienced usability. Additionally, objective usability measures (task completion and duration and subjective aesthetics evaluations were recorded for each website. The results at both the group and individual level show that expected usability ratings are not significantly related either to experienced usability or objective usability measures. Instead, they are highly correlated with aesthetics ratings. Taken together, our results highlight the need for interaction in empirical website usability testing, even when exploring very early usability impressions. In our study, user ratings of expected usability were no valid proxy neither for objective usability nor for experienced website usability.

Development of a Wearable Instrumented Vest for Posture Monitoring and System Usability Verification Based on the Technology Acceptance Model

Science.gov (United States)

Lin, Wen-Yen; Chou, Wen-Cheng; Tsai, Tsai-Hsuan; Lin, Chung-Chih; Lee, Ming-Yih

2016-01-01

Body posture and activity are important indices for assessing health and quality of life, especially for elderly people. Therefore, an easily wearable device or instrumented garment would be valuable for monitoring elderly people’s postures and activities to facilitate healthy aging. In particular, such devices should be accepted by elderly people so that they are willing to wear it all the time. This paper presents the design and development of a novel, textile-based, intelligent wearable vest for real-time posture monitoring and emergency warnings. The vest provides a highly portable and low-cost solution that can be used both indoors and outdoors in order to provide long-term care at home, including health promotion, healthy aging assessments, and health abnormality alerts. The usability of the system was verified using a technology acceptance model-based study of 50 elderly people. The results indicated that although elderly people are anxious about some newly developed wearable technologies, they look forward to wearing this instrumented posture-monitoring vest in the future. PMID:27999324

Novel technologies for the lost foam casting process

Science.gov (United States)

Jiang, Wenming; Fan, Zitian

2018-03-01

Lost foam casting (LFC) is a green precision casting process categorized as a near net forming technology. Yet, despite its popularity, it still suffers from some technological problems, such as poor filling ability of the castings, coarse and non-dense microstructure, low mechanical properties for the Al and Mg LFC processes, and defective carburization for the low carbon steel LFC process. These drawbacks restrict the development and widespread application of the LFC process. To solve these problems, the present study developed several novel LFC technologies, namely, LFC technologies under vacuum and low pressure, vibration solidification, and pressure solidification conditions; expendable shell casting technology; and preparation technology of bimetallic castings based on the LFC process. The results showed that the LFC under vacuum and low pressure evidently improved the filling ability and solved the oxidization problem of the alloys, which is suitable for producing complex and thinwall castings. The vibration and pressure solidifications increased the compactness of the castings and refined the microstructure, significantly improving the mechanical properties of the castings. The expendable shell casting technology could solve the pore, carburization, and inclusion defects of the traditional LFC method, obtaining castings with acceptable surface quality. Moreover, the Al/Mg and Al/Al bimetallic castings with acceptable metallurgical bonding were successfully fabricated using the LFC process. These proposed novel LFC technologies can solve the current technological issues and promote the technological progress of the LFC process.

Images of Usability

DEFF Research Database (Denmark)

Hertzum, Morten

2010-01-01

unless confronted with alternative images. This study delineates six images of usability: universal usability, situational usability, perceived usability, hedonic usability, organizational usability, and cultural usability. The different foci of the images provide opportunities for becoming sensitized...... assume different images of usability and a need for supplementary methods addressing the collaborative and long-term aspects of usability. Moreover, the images call for extending the scope of practical usability work to include the effects achieved by users during their use of systems for real work....

Supporting Our Valued Adolescents (SOVA), a Social Media Website for Adolescents with Depression and/or Anxiety: Technological Feasibility, Usability, and Acceptability Study.

Science.gov (United States)

Radovic, Ana; Gmelin, Theresa; Hua, Jing; Long, Cassandra; Stein, Bradley D; Miller, Elizabeth

2018-02-26

Supporting Our Valued Adolescents (SOVA), a social media website for adolescents, was designed to increase mental health literacy and address negative health beliefs toward depression and/or anxiety diagnosis and treatment. This stakeholder-informed site underwent iterative user testing to evolve into its current version with daily blog posts, round-the-clock site moderation, and Web-based peer interaction to create an online support community. The aim of this study was to evaluate the technological feasibility (at least 100 users on the site, logging in 12 to 18 times in the first 6 weeks) and acceptability of the SOVA site determined by the System Usability Scale (SUS). Adolescents and young adults (aged 14-26 years) with a self-reported history of depressive and/or anxiety symptoms were recruited to access the research website (sova.pitt.edu). Participants were screened out if they reported active suicidality or a prior suicide attempt. Baseline survey measures included demographics, symptomatology using the Patient Health Questionnaire-9 modified for adolescents (PHQ-9A) and Screen for Child Anxiety Related Disorders (SCARED-C), and mental health treatment history. The 6-week follow-up measures taken in addition to the symptomatology, included feasibility (total number of log-ins), usability, and acceptability of SOVA using SUS. Most of the 96 participants identified as female (75% [72/96]) and white (67% [64/96]). Most participants (73% [70/96]) reported having taken prior professional psychological help. The average PHQ-9A score was 11.8 (SD 5.5), and for SCARED-C, 85% (80/94) of the participants reported a score consistent with being susceptible to a diagnosed anxiety disorder. There were 46% (41/90) of eligible users who ever logged in. Out of the total users who ever logged in, the mean of total log-ins over the entire study was 4.1 (SD 6.9). Median number of users rated the user-friendliness of the site as "good." The average SUS score was 71.2% (SD 18

Qualitative Assessment of the Feasibility, Usability, and Acceptability of a Mobile Client Data App for Community-Based Maternal, Neonatal, and Child Care in Rural Ghana

Directory of Open Access Journals (Sweden)

Jessica D. Rothstein

2016-01-01

Full Text Available Mobile phone applications may enhance the delivery of critical health services and the accuracy of health service data. Yet, the opinions and experiences of frontline health workers on using mobile apps to track pregnant and recently delivered women are underreported. This evaluation qualitatively assessed the feasibility, usability, and acceptability of a mobile Client Data App for maternal, neonatal, and child client data management by community health nurses (CHNs in rural Ghana. The mobile app enabled CHNs to enter, summarize, and query client data. It also sent visit reminders for clients and provided a mechanism to report level of care to district officers. Fourteen interviews and two focus groups with CHNs, midwives, and district health officers were conducted, coded, and thematically analyzed. Results indicated that the app was easily integrated into care, improved CHN productivity, and was acceptable due to its capacity to facilitate client follow-up, data reporting, and decision-making. However, the feasibility and usability of the app were hindered by high client volumes, staff shortages, and software and device challenges. Successful integration of mobile client data apps for frontline health workers in rural and resource-poor settings requires real-time monitoring, program investments, and targeted changes in human resources.

Usability Study of a Wireless Monitoring System among Alzheimer’s Disease Elderly Population

Directory of Open Access Journals (Sweden)

Stefano Abbate

2014-01-01

Full Text Available Healthcare technologies are slowly entering into our daily lives, replacing old devices and techniques with newer intelligent ones. Although they are meant to help people, the reaction and willingness to use such new devices by the people can be unexpected, especially among the elderly. We conducted a usability study of a fall monitoring system in a long-term nursing home. The subjects were the elderly with advanced Alzheimer’s disease. The study presented here highlights some of the challenges faced in the use of wearable devices and the lessons learned. The results gave us useful insights, leading to ergonomics and aesthetics modifications to our wearable systems that significantly improved their usability and acceptance. New evaluating metrics were designed for the performance evaluation of usability and acceptability.

Biofeedback in Partial Weight Bearing: Usability of Two Different Devices from a Patient's and Physical Therapist's Perspective.

Science.gov (United States)

van Lieshout, Remko; Pisters, Martijn F; Vanwanseele, Benedicte; de Bie, Rob A; Wouters, Eveline J; Stukstette, Mirelle J

2016-01-01

Partial weight bearing is frequently instructed by physical therapists in patients after lower-limb trauma or surgery. The use of biofeedback devices seems promising to improve the patient's compliance with weight-bearing instructions. SmartStep and OpenGo-Science are biofeedback devices that provide real-time feedback. For a successful implementation, usability of the devices is a critical aspect and should be tested from a user's perspective. To describe the usability from the physical therapists' and a patients' perspective of Smartstep and OpenGo-Science to provide feedback on partial weight bearing during supervised rehabilitation of patients after lower-limb trauma or surgery. In a convergent mixed-methods design, qualitative and quantitative data were collected. Usability was subdivided into user performance, satisfaction and acceptability. Patients prescribed with partial weight bearing and their physical therapists were asked to use SmartStep and OpenGo-Science during supervised rehabilitation. Usability was qualitatively tested by a think-aloud method and a semi-structured interview and quantitatively tested by the System-Usability-Scale (SUS) and closed questions. For the qualitative data thematic content analyses were used. Nine pairs of physical therapists and their patients participated. The mean SUS scores for patients and physical therapists were for SmartStep 70 and 53, and for OpenGo-Science 79 and 81, respectively. Scores were interpreted with the Curved Grading Scale. The qualitative data showed that there were mixed views and perceptions from patients and physical therapists on satisfaction and acceptability. This study gives insight in the usability of two biofeedback devices from the patient's and physical therapist's perspective. The overall usability from both perspectives seemed to be acceptable for OpenGo-Science. For SmartStep, overall usability seemed only acceptable from the patient's perspective. The study findings could help

A New Electronic Monitoring Device to Measure Medication Adherence: Usability of the Helping Hand™

Directory of Open Access Journals (Sweden)

Sabina De Geest

2010-03-01

Full Text Available The aim of this study was to test the user performance, satisfaction and acceptability of the Helping Hand™ (B&O Medicom electronic medication adherence monitor. Using a mixed-method design, we studied 11 kidney transplant patients and 10 healthy volunteers during three weeks. Although testing showed positive usability aspects, several areas requiring technical improvement were identified: the most important obstacles to usability and acceptability were the weak sound signal, problems loading the medication, and the fact that only one medication could be used at a time.

Integration of MSFC Usability Lab with Usability Testing

Science.gov (United States)

Cheng, Yiwei; Richardson, Sally

2010-01-01

As part of the Stage Analysis Branch, human factors engineering plays an important role in relating humans to the systems of hardware and structure designs of the new launch vehicle. While many branches are involved in the technical aspects of creating a launch vehicle, human factors connects humans to the scientific systems with the goal of improving operational performance and safety while reducing operational error and damage to the hardware. Human factors engineers use physical and computerized models to visualize possible areas for improvements to ensure human accessibility to components requiring maintenance and that the necessary maintenance activities can be accomplished with minimal risks to human and hardware. Many methods of testing are used to fulfill this goal, such as physical mockups, computerized visualization, and usability testing. In this analysis, a usability test is conducted to test how usable a website is to users who are and are not familiar with it. The testing is performed using participants and Morae software to record and analyze the results. This analysis will be a preliminary test of the usability lab in preparation for use in new spacecraft programs, NASA Enterprise, or other NASA websites. The usability lab project is divided into two parts: integration of the usability lab and a preliminary test of the usability lab.

A Usability Study of Users' Perceptions toward a Multimedia Computer-Assisted Learning Tool for Neuroanatomy

Science.gov (United States)

Gould, Douglas J.; Terrell, Mark A.; Fleming, Jo

2008-01-01

This usability study evaluated users' perceptions of a multimedia prototype for a new e-learning tool: Anatomy of the Central Nervous System: A Multimedia Course. Usability testing is a collection of formative evaluation methods that inform the developmental design of e-learning tools to maximize user acceptance, satisfaction, and adoption.…

Usability Prediction & Ranking of SDLC Models Using Fuzzy Hierarchical Usability Model

Science.gov (United States)

Gupta, Deepak; Ahlawat, Anil K.; Sagar, Kalpna

2017-06-01

Evaluation of software quality is an important aspect for controlling and managing the software. By such evaluation, improvements in software process can be made. The software quality is significantly dependent on software usability. Many researchers have proposed numbers of usability models. Each model considers a set of usability factors but do not cover all the usability aspects. Practical implementation of these models is still missing, as there is a lack of precise definition of usability. Also, it is very difficult to integrate these models into current software engineering practices. In order to overcome these challenges, this paper aims to define the term `usability' using the proposed hierarchical usability model with its detailed taxonomy. The taxonomy considers generic evaluation criteria for identifying the quality components, which brings together factors, attributes and characteristics defined in various HCI and software models. For the first time, the usability model is also implemented to predict more accurate usability values. The proposed system is named as fuzzy hierarchical usability model that can be easily integrated into the current software engineering practices. In order to validate the work, a dataset of six software development life cycle models is created and employed. These models are ranked according to their predicted usability values. This research also focuses on the detailed comparison of proposed model with the existing usability models.

Usability in the lifecycle of medical software development

Directory of Open Access Journals (Sweden)

Trauzettel Franziska

2016-09-01

Full Text Available A close cooperation with users is necessary to ensure that interactive systems are robust, easy to use and accepted. Therefore, in medical technology, standards for usability are of fundamental importance. We investigated with the presented study how the concept of usability is currently understood and implemented in medical software companies. Interviews were conducted with 21 employees of German enterprises. Furthermore we extended an already existing quantitative online survey where 53 companies (including 24 from the health industry sector participated in. Results show that the importance of usability is recognized by most of the respondents. Moreover, a wide variety of methods and approaches is known and implemented for exploring user needs and evaluating system prototypes. However, it was observed that human-centered design activities mainly focus on functionality, risk prevention and accessibility. Hedonic user needs and subjective perceptions (“user experience” still play a minor role. Based on the results, practical requirements are derived and a “best case” for methodological approach is introduced.

Design of New-Generation Usable Forms of Topical Haemostatic Agents Containing Chitosan

Directory of Open Access Journals (Sweden)

Dorota Zielińska

2017-12-01

Full Text Available Designing usable forms of topical haemostatic agents is the most important activity during the design process, resulting in strengthened functional properties of the final medical devices. This study aimed to propose indications for a research programme based on risk management supporting the development of two usable forms of a topical haemostatic agent: chitosan/alginate lyophilized foam and chitosan/alginate impregnated gauze. Both of the usable forms of the topical haemostatic agent, being the main part of the modified combat gauze, were fabricated using the chitosan/alginate complex. Risk analysis is helpful in developing an appropriate research programme, significantly reducing the risk to an acceptable level.

Effect of Microstructures on Working Properties of Nickel-Manganese-Copper Cast Iron

Directory of Open Access Journals (Sweden)

Daniel Medyński

2018-05-01

Full Text Available In the paper, the effects, on basic usable properties (abrasive wear and corrosion resistance, of solidification (acc. to the stable and non-stable equilibrium system and transformations occurring in the matrix during the cooling of castings of Ni-Mn-Cu cast iron were determined. Abrasive wear resistance was mainly determined by the types and arrangements of high-carbon phases (indicated by eutectic saturation degree, and the kinds of matrices (indicated by the nickel equivalent value, calculated from chemical composition. The highest abrasive wear resistance was found for white cast iron, with the highest degree of austenite to martensite transformation occurring in its matrix. Irrespective of solidification, a decrease of the equivalent value below a limit value resulted in increased austenite transformation, and thus, to a significant rise in hardness and abrasive wear resistance for the castings. At the same time, corrosion resistance of the alloy was slightly reduced. The examinations showed that corrosion resistance of Ni-Mn-Cu cast iron is, too a much lesser degree, decided by the means of solidification of the castings, rather than transformations occurring in the matrix, as controlled by nickel equivalent value (especially elements with high electrochemical potential.

Biofeedback in Partial Weight Bearing: Usability of Two Different Devices from a Patient’s and Physical Therapist’s Perspective

Science.gov (United States)

van Lieshout, Remko; Pisters, Martijn F.; Vanwanseele, Benedicte; de Bie, Rob A.; Wouters, Eveline J.; Stukstette, Mirelle J.

2016-01-01

Background Partial weight bearing is frequently instructed by physical therapists in patients after lower-limb trauma or surgery. The use of biofeedback devices seems promising to improve the patient’s compliance with weight-bearing instructions. SmartStep and OpenGo-Science are biofeedback devices that provide real-time feedback. For a successful implementation, usability of the devices is a critical aspect and should be tested from a user’s perspective. Aim To describe the usability from the physical therapists’ and a patients’ perspective of Smartstep and OpenGo-Science to provide feedback on partial weight bearing during supervised rehabilitation of patients after lower-limb trauma or surgery. Methods In a convergent mixed-methods design, qualitative and quantitative data were collected. Usability was subdivided into user performance, satisfaction and acceptability. Patients prescribed with partial weight bearing and their physical therapists were asked to use SmartStep and OpenGo-Science during supervised rehabilitation. Usability was qualitatively tested by a think-aloud method and a semi-structured interview and quantitatively tested by the System-Usability-Scale (SUS) and closed questions. For the qualitative data thematic content analyses were used. Results Nine pairs of physical therapists and their patients participated. The mean SUS scores for patients and physical therapists were for SmartStep 70 and 53, and for OpenGo-Science 79 and 81, respectively. Scores were interpreted with the Curved Grading Scale. The qualitative data showed that there were mixed views and perceptions from patients and physical therapists on satisfaction and acceptability. Conclusion This study gives insight in the usability of two biofeedback devices from the patient’s and physical therapist’s perspective. The overall usability from both perspectives seemed to be acceptable for OpenGo-Science. For SmartStep, overall usability seemed only acceptable from the

A Usability Evaluation Model for Academic Library Websites: Efficiency, Effectiveness and Learnability

Directory of Open Access Journals (Sweden)

Soohyung Joo

2011-12-01

Full Text Available Purpose – This paper aimed to develop a usability evaluation model and associated survey tool in the context of academic libraries. This study not only proposed a usability evaluation model but also a practical survey tool tailored to academic library websites. Design/methodology – A usability evaluation model has been developed for academic library websites based on literature review and expert consultation. Then, the authors verified the reliability and validity of the usability evaluation model empirically using the survey data from actual users. Statistical analysis, such as descriptive statistics, internal consistency test, and a factor analysis, were applied to ensure both the reliability and validity of the usability evaluation tool. Findings – From the document analysis and expert consultation, this study identified eighteen measurement items to survey the three constructs of the usability, effectiveness, efficiency, and learnability, in academic library websites. The evaluation tool was then validated with regard to data distribution, reliability, and validity. The empirical examination based on 147 actual user responses proved the survey evaluation tool suggested herein is acceptable in assessing academic library website usability. Originality/Value – This research is one of the few studies to engender a practical survey tool in evaluating library website usability. The usability model and corresponding survey tool would be useful for librarians and library administrators in academic libraries who plan to conduct a usability evaluation involving large sample.

Hello World! - Experiencing Usability Methods without Usability Expertise

Science.gov (United States)

Eriksson, Elina; Cajander, Åsa; Gulliksen, Jan

How do you do usability work when no usability expertise is available? What happens in an organization when system developers, with no previous HCI knowledge, after a 3-day course, start applying usability methods, and particularly field studies? In order to answer these questions qualitative data were gathered through participatory observations, a feed back survey, field study documentation and interviews from 47 system developers from a public authority. Our results suggest that field studies enhance the developer’s understanding of the user perspective, and provide a more holistic overview of the use situation, but that some developers were unable to interpret their observations and see solutions to the users’ problems. The field study method was very much appreciated and has now become standard operating procedure within the organization. However, although field studies may be useful, it does not replace the need for usability pro fes sion als, as their knowledge is essential for more complex observations, analysis and for keeping the focus on usability.

Usability and feasibility of health IT interventions to enhance Self-Care for Lymphedema Symptom Management in breast cancer survivors

Directory of Open Access Journals (Sweden)

Mei R. Fu, PhD, RN, FAAN

2016-09-01

Conclusions: This usability study provided evidence on breast cancer survivor's acceptance and highly positive evaluation of TOLF's usability as well as feasibility of using technologically-driven delivery model to enhance self-care strategies for lymphedema symptom management.

Global usability

CERN Document Server

Douglas, Ian

2011-01-01

The concept of usability has become an increasingly important consideration in the design of all kinds of technology. As more products are aimed at global markets and developed through internationally distributed teams, usability design needs to be addressed in global terms. Interest in usability as a design issue and specialist area of research and education has developed steadily in North America and Europe since the 1980's. However, it is only over the last ten years that it has emerged as a global concern. Global Usability provides an introduction to the important issues in globalizing des

Usability Constructs

DEFF Research Database (Denmark)

Hertzum, Morten; Clemmesen, Torkil; Hornbæk, Kasper Anders Søren

2007-01-01

Whereas research on usability predominantly employs universal definitions of the aspects that comprise usability, people experience their use of information systems through personal constructs. Based on 48 repertory-grid interviews, this study investigates how such personal constructs are affected...... use of constructs traditionally associated with usability (e.g., easy-to-use, intuitive, and liked). Further analysis of the data is ongoing...

Data Package for Secondary Waste Form Down-Selection-Cast Stone

International Nuclear Information System (INIS)

Serne, R. Jeffrey; Westsik, Joseph H.

2011-01-01

Available literature on Cast Stone and Saltstone was reviewed with an emphasis on determining how Cast Stone and related grout waste forms performed in relationship to various criteria that will be used to decide whether a specific type of waste form meets acceptance criteria for disposal in the Integrated Disposal Facility (IDF) at Hanford. After the critical review of the Cast Stone/Saltstone literature, we conclude that Cast Stone is a good candidate waste form for further consideration. Cast stone meets the target IDF acceptance criteria for compressive strength, no free liquids, TCLP leachate are below the UTS permissible concentrations and leach rates for Na and Tc-99 are suiteably low. The cost of starting ingredients and equipment necessary to generate Cast Stone waste forms with secondary waste streams are low and the Cast Stone dry blend formulation can be tailored to accommodate variations in liquid waste stream compositions. The database for Cast Stone short-term performance is quite extensive compared to the other three candidate waste solidification processes. The solidification of liquid wastes in Cast Stone is a mature process in comparison to the other three candidates. Successful production of Cast Stone or Saltstone has been demonstrated from lab-scale monoliths with volumes of cm3 through m3 sized blocks to 210-liter sized drums all the way to the large pours into vaults at Savannah River. To date over 9 million gallons of low activity liquid waste has been solidified and disposed in concrete vaults at Savannah River.

Data Package for Secondary Waste Form Down-Selection—Cast Stone

Energy Technology Data Exchange (ETDEWEB)

Serne, R. Jeffrey; Westsik, Joseph H.

2011-09-05

Available literature on Cast Stone and Saltstone was reviewed with an emphasis on determining how Cast Stone and related grout waste forms performed in relationship to various criteria that will be used to decide whether a specific type of waste form meets acceptance criteria for disposal in the Integrated Disposal Facility (IDF) at Hanford. After the critical review of the Cast Stone/Saltstone literature, we conclude that Cast Stone is a good candidate waste form for further consideration. Cast stone meets the target IDF acceptance criteria for compressive strength, no free liquids, TCLP leachate are below the UTS permissible concentrations and leach rates for Na and Tc-99 are suiteably low. The cost of starting ingredients and equipment necessary to generate Cast Stone waste forms with secondary waste streams are low and the Cast Stone dry blend formulation can be tailored to accommodate variations in liquid waste stream compositions. The database for Cast Stone short-term performance is quite extensive compared to the other three candidate waste solidification processes. The solidification of liquid wastes in Cast Stone is a mature process in comparison to the other three candidates. Successful production of Cast Stone or Saltstone has been demonstrated from lab-scale monoliths with volumes of cm3 through m3 sized blocks to 210-liter sized drums all the way to the large pours into vaults at Savannah River. To date over 9 million gallons of low activity liquid waste has been solidified and disposed in concrete vaults at Savannah River.

Evaluation of the acceptability and usability of a decision support system to encourage safe and effective use of opioid therapy for chronic, noncancer pain by primary care providers.

Science.gov (United States)

Trafton, Jodie; Martins, Susana; Michel, Martha; Lewis, Eleanor; Wang, Dan; Combs, Ann; Scates, Naquell; Tu, Samson; Goldstein, Mary K

2010-04-01

To develop and evaluate a clinical decision support system (CDSS) named Assessment and Treatment in Healthcare: Evidenced-Based Automation (ATHENA)-Opioid Therapy, which encourages safe and effective use of opioid therapy for chronic, noncancer pain. CDSS development and iterative evaluation using the analysis, design, development, implementation, and evaluation process including simulation-based and in-clinic assessments of usability for providers followed by targeted system revisions. Volunteers provided detailed feedback to guide improvements in the graphical user interface, and content and design changes to increase clinical usefulness, understandability, clinical workflow fit, and ease of completing guideline recommended practices. Revisions based on feedback increased CDSS usability ratings over time. Practice concerns outside the scope of the CDSS were also identified. Usability testing optimized the CDSS to better address barriers such as lack of provider education, confusion in dosing calculations and titration schedules, access to relevant patient information, provider discontinuity, documentation, and access to validated assessment tools. It also highlighted barriers to good clinical practice that are difficult to address with CDSS technology in its current conceptualization. For example, clinicians indicated that constraints on time and competing priorities in primary care, discomfort in patient-provider communications, and lack of evidence to guide opioid prescribing decisions impeded their ability to provide effective, guideline-adherent pain management. Iterative testing was essential for designing a highly usable and acceptable CDSS; however, identified barriers may limit the impact of the ATHENA-Opioid Therapy system and other CDSS on clinical practices and outcomes unless CDSS are paired with parallel initiatives to address these issues.

Standard digital reference images for titanium castings

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 The digital reference images provided in the adjunct to this standard illustrate various types and degrees of discontinuities occurring in titanium castings. Use of this standard for the specification or grading of castings requires procurement of the adjunct digital reference images, which illustrate the discontinuity types and severity levels. They are intended to provide the following: 1.1.1 A guide enabling recognition of titanium casting discontinuities and their differentiation both as to type and degree through digital radiographic examination. 1.1.2 Example digital radiographic illustrations of discontinuities and a nomenclature for reference in acceptance standards, specifications and drawings. 1.2 The digital reference images consist of seventeen digital files each illustrating eight grades of increasing severity. The files illustrate seven common discontinuity types representing casting sections up to 1-in. (25.4-mm). 1.3 The reference radiographs were developed for casting sections up to 1...

Software Usability: Concepts, Attributes and Associated Health Problems

Directory of Open Access Journals (Sweden)

Grīnberga Sabīne

2016-10-01

Full Text Available Digital technologies have opened a large set of opportunities for new electronic services (e-commerce, e-health, e-studies etc.. There are many considerations that need to be made when programmers are building new application software or system software. The software needs to be attractive enough that people want to look at it. It also needs to contain all necessary information that developers want to share with their readers (customers, users in order to help them achieve the objective for which they came to their website, use their software, or interact with their teaching packages. The oversupply of e-services products has created a need for usability research and development. “Usability means making products and systems easier to use, and matching them more closely to user needs and requirements”. Usability is a key concept of the human-computer interface and is concerned with making computer systems easy to learn and easy to use through a user-centered design process. The in-depth understanding of usability concepts and processes are critical for large-scale acceptance of new e-services and knowledge productivity. Poorly designed software can be extremely annoying to users. Smith and Mayes state that „usability is now recognised as a vital determining factor in the success of any new computer system or computer-based service”. Studies have shown that the main health problems of computer users are repetitive strain injuries, visual discomfort and stress-related disorders. Beside other risk factors, such as poor workstation design, uncomfortable work postures, long hours of computer use every day, stress, etc., also poor design and usability of the computer systems, as well as computer technical problems, add to the pressure felt by the user, which may in turn cause stress-related disorders.

Usability of clinical decision support system as a facilitator for learning the assistive technology adaptation process.

Science.gov (United States)

Danial-Saad, Alexandra; Kuflik, Tsvi; Weiss, Patrice L Tamar; Schreuer, Naomi

2016-01-01

The aim of this study was to evaluate the usability of Ontology Supported Computerized Assistive Technology Recommender (OSCAR), a Clinical Decision Support System (CDSS) for the assistive technology adaptation process, its impact on learning the matching process, and to determine the relationship between its usability and learnability. Two groups of expert and novice clinicians (total, n = 26) took part in this study. Each group filled out system usability scale (SUS) to evaluate OSCAR's usability. The novice group completed a learning questionnaire to assess OSCAR's effect on their ability to learn the matching process. Both groups rated OSCAR's usability as "very good", (M [SUS] = 80.7, SD = 11.6, median = 83.7) by the novices, and (M [SUS] = 81.2, SD = 6.8, median = 81.2) by the experts. The Mann-Whitney results indicated that no significant differences were found between the expert and novice groups in terms of OSCAR's usability. A significant positive correlation existed between the usability of OSCAR and the ability to learn the adaptation process (rs = 0.46, p = 0.04). Usability is an important factor in the acceptance of a system. The successful application of user-centered design principles during the development of OSCAR may serve as a case study that models the significant elements to be considered, theoretically and practically in developing other systems. Implications for Rehabilitation Creating a CDSS with a focus on its usability is an important factor for its acceptance by its users. Successful usability outcomes can impact the learning process of the subject matter in general, and the AT prescription process in particular. The successful application of User-Centered Design principles during the development of OSCAR may serve as a case study that models the significant elements to be considered, theoretically and practically. The study emphasizes the importance of close collaboration between the developers and

Marketing through Usability.

Science.gov (United States)

Morgan, Eric Lease

1999-01-01

Suggests that one of the best ways to get word-of-mouth marketing of library technology is to provide "usable" products and services. Provides an international standards definition on usability and notes that understanding usability combines an understanding of user needs/wants with an understanding of goals, functions, and limitations…

Usability and Acceptance of the Librarian Infobutton Tailoring Environment: An Open Access Online Knowledge Capture, Management, and Configuration Tool for OpenInfobutton.

Science.gov (United States)

Jing, Xia; Cimino, James J; Del Fiol, Guilherme

2015-11-30

The Librarian Infobutton Tailoring Environment (LITE) is a Web-based knowledge capture, management, and configuration tool with which users can build profiles used by OpenInfobutton, an open source infobutton manager, to provide electronic health record users with context-relevant links to online knowledge resources. We conducted a multipart evaluation study to explore users' attitudes and acceptance of LITE and to guide future development. The evaluation consisted of an initial online survey to all LITE users, followed by an observational study of a subset of users in which evaluators' sessions were recorded while they conducted assigned tasks. The observational study was followed by administration of a modified System Usability Scale (SUS) survey. Fourteen users responded to the survey and indicated good acceptance of LITE with feedback that was mostly positive. Six users participated in the observational study, demonstrating average task completion time of less than 6 minutes and an average SUS score of 72, which is considered good compared with other SUS scores. LITE can be used to fulfill its designated tasks quickly and successfully. Evaluators proposed suggestions for improvements in LITE functionality and user interface.

Usability perspective on social media sites' adoption in the B2B context

OpenAIRE

Lacka, Ewelina; Chong, Alain

2016-01-01

While social media sites have been successfully adopted and used in the B2C context, they are perceived to be irrelevant in B2B marketing. This is due to marketers' perception of poor usability of these sites in the B2B sector. This study investigates the usability of social media sites when adopted for B2B marketing purposes in the one of world's largest social media market: China. Specifically, by extending the Technology Acceptance Model with Nielsen's Model of Attributes of System Accepta...

Sample size in usability studies

NARCIS (Netherlands)

Schmettow, Martin

2012-01-01

Usability studies are important for developing usable, enjoyable products, identifying design flaws (usability problems) likely to compromise the user experience. Usability testing is recommended for improving interactive design, but discovery of usability problems depends on the number of users

Casting made simple using modified sprue design: an in vitro study.

Science.gov (United States)

Baskaran, B Eswaran; Geetha Prabhu, K R; Prabhu, R; Krishna, G Phani; Eswaran, M A; Gajapathi, B

2014-01-01

Success in dental casting restorations for fixed partial dentures (FPDs) depends on the castability. Castability is described as the ability of an alloy to faithfully reproduce sharp detail and fine margins of a wax pattern. The goal of a prosthodontist is to provide the patient with restorations that fit precisely. Regardless of the alloy used for casting, the casting technique should yield a casted alloy, which should possess sufficient mass, surface hardness and minimal porosity after casting. Twenty patterns for casting were made from three-dimensional printed resin pattern simulating a 3 unit FPD and casted using modified sprue technique. Later test samples were cemented sequentially on stainless steel model using pressure indicating paste and evaluated for vertical marginal gap in eight predetermined reference areas. Marginal gap were measured in microns using Video Measuring System (VMS2010F-CIP Corporation, Korea). A portion of the axial wall of the cast abutments depicting premolar and molar were sectioned and embedded in acrylic resin and tested for micro hardness using Reichert Polyvar 2 Met Microhardness tester (Reichert, Austria) and porosity using Quantimet Image Analyzer (Quantimet Corporation London, England). The results obtained for marginal gap, micro hardness, and porosity of all test samples were tabulated, descriptive statistics were calculated and the values were found to be within the clinically acceptable range. The new sprue technique can be an alternative and convenient method for casting which would minimize metal wasting and less time consuming. However, further studies with same technique on various parameters are to be conducted for its broad acceptance.

Cultural Usability

DEFF Research Database (Denmark)

Shi, Qingxin

2007-01-01

Culture has already played an important role in the global market. It not only affects products, but also impacts on usability evaluation methods. This project aims to examine in the established thinking aloud usability evaluation method (TA UEM), how does the evaluator build a supportive...

The impact of usability reports and user test observations on developers understanding of usability data

DEFF Research Database (Denmark)

Høegh, Rune Thaarup; Nielsen, Christian Monrad; Pedersen, Michael Bach

2006-01-01

of the system. This article presents results from an exploratory study of 2 ways of providing feedback from a usability evaluation: observation of user tests and reading usability reports. A case study and a field experiment were used to explore how observation and usability reports impact developers......' understanding of usability data. The results indicate that observation of user tests facilitated a rich understanding of usability problems and created empathy with the users and their work. The usability report had a strong impact on the developers' understanding of specific usability problems and supported...

Exploring Multiple Usability Perspectives

DEFF Research Database (Denmark)

Uldall-Espersen, Tobias

2007-01-01

Industrial usability work often fails to produce the expected impact on software products even though significant resources have been used on uncovering problems and suggesting improvements. So, it seems that feedback from industrial usability work lacks persuasiveness, i.e. it fails to convince...... the key stakeholders that actions need to be taken. This study reports from interviews with 26 stakeholders in software development projects. Our data suggests that the interviewees address usability using different perspectives and based on our observations we describe five such perspectives. Further, we...... discuss how applying different usability perspectives might inform the persuasiveness of usability work....

Pressing Speed, Specific Pressure and Mechanical Properties of Aluminium Cast

Directory of Open Access Journals (Sweden)

Gaspar S.

2016-06-01

Full Text Available Recent research in the process of aluminum alloy die castings production, which is nowadays deeply implemented into the rapidly growing automobile, shipping and aircraft industries, is aimed at increasing the useful qualitative properties of the die casting in order to obtain its high mechanical properties at acceptable economic cost. Problem of technological factors of high pressure die casting has been a subject of worldwide research (EU, US, Japan, etc.. The final performance properties of die castings are subjected to a large number of technological factors. The main technological factors of high pressure die casting are as follows: plunger pressing speed, specific (increase pressure, mold temperature as well as alloy temperature. The contribution discusses the impact of the plunger pressing speed and specific (increase pressure on the mechanical properties of the casting aluminum alloy.

Centrifugal vacuum casting for fuel cladding tube blanks

International Nuclear Information System (INIS)

Zelenskii, V.F.; Neklyudov, I.M.; Chernyi, B.P.; Zeidlits, M.P.; Vanzha, A.F.; Rubashko, V.G.; Ryabchikov, L.N.; Smirnov, Y.K.; Bespalova, V.R.; Mashkarova, V.T.; Rybal'chenko, N.D.

1990-01-01

An advanced technique for making tube blanks with an acceptable level of nonmetallic inclusions is vacuum induction melting combined with centrifugal casting, as the latter gives a cylindrical casting having an axial hole, while the cast metal has elevated density and contains fewer nonmetallic inclusions than does the metal cast in a stationary mold. The reduction in the nonmetallic inclusions occurs because of increased rates of floating up in the rotating mold on account of the centrifugal force and the rejection to the inner surface. One can choose the parameters such as the pouring speed, rotational speed, mold cooling, and liquid-metal temperature and can introduce a deoxidizer to remove the nonmetallic inclusions or reduce the grain size of them and produce an appropriate cast structure and obtain a metal whose quality is the same as that on vacuum induction melting with secondary arc remelting. For these purposes, the authors have developed centrifugal-casting machines for use under vacuum or in inert gases with horizontal and vertical mold rotation axes

Usability of mobile phone food records to assess dietary intake in adolescents

Science.gov (United States)

Mobile technologies are emerging as a valuable tool to collect and assess dietary intake. Adolescents readily accept and adopt new technologies, hence, a food record application (FRapp) may provide an accurate mechanism to monitor dietary intake. We examined the usability of a FRapp in 17 free-livin...

Usability Briefing for hospital design

DEFF Research Database (Denmark)

Fronczek-Munter, Aneta

This PhD thesis is a contribution to an ongoing debate in Denmark about improving the building design processes of complex buildings, especially in relation to the current hospital developments. It provides knowledge about capturing user needs and defines the process model for usability briefing...... and evaluations, can be fed into briefing and design processes. This PhD thesis proposes methods for usability briefing.Usability is a concept similar to functionality, but usability depends on: subjective view of users, context, culture, situation and experience. Understanding usability is achieved by involving...... users. This PhD thesis extends the research in usability of buildings to include all building design phases, therefore not only proposes usability evaluations, but also defines usability briefing. Briefing, also called architectural programming, is usually understood as one of the first phases...

Evaluation of marginal gap of Ni-Cr copings made with conventional and accelerated casting techniques.

Science.gov (United States)

Tannamala, Pavan Kumar; Azhagarasan, Nagarasampatti Sivaprakasam; Shankar, K Chitra

2013-01-01

Conventional casting techniques following the manufacturers' recommendations are time consuming. Accelerated casting techniques have been reported, but their accuracy with base metal alloys has not been adequately studied. We measured the vertical marginal gap of nickel-chromium copings made by conventional and accelerated casting techniques and determined the clinical acceptability of the cast copings in this study. Experimental design, in vitro study, lab settings. Ten copings each were cast by conventional and accelerated casting techniques. All copings were identical, only their mold preparation schedules differed. Microscopic measurements were recorded at ×80 magnification on the perpendicular to the axial wall at four predetermined sites. The marginal gap values were evaluated by paired t test. The mean marginal gap by conventional technique (34.02 μm) is approximately 10 μm lesser than that of accelerated casting technique (44.62 μm). As the P value is less than 0.0001, there is highly significant difference between the two techniques with regard to vertical marginal gap. The accelerated casting technique is time saving and the marginal gap measured was within the clinically acceptable limits and could be an alternative to time-consuming conventional techniques.

Casting dimensional control and fatigue life prediction for permanent mold casting dies. Technical progress report, September 29, 1993-- September 30, 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-11-01

First year efforts as part of a three year program to address metal casting dimensional control and fatigue life prediction for permanent mold casting dies are described. Procedures have been developed and implemented to collect dimensional variability data from production steel castings. The influence of process variation and casting geometry variables on dimensional tolerances have been investigated. Preliminary results have shown that these factors have a significant influence on dimensional variability, although this variability is considerably less than the variability indicated in current tolerance standards. Gage repeatability and reproducibility testing must precede dimensional studies to insure that measurement system errors are acceptably small. Also initial efforts leading to the development and validation of a CAD/CAE model to predict the thermal fatigue life of permanent molds for aluminum castings are described. An appropriate thermomechanical property database for metal, mold and coating materials has been constructed. A finite element model has been developed to simulate the mold temperature distribution during repeated casting cycles. Initial validation trials have indicated the validity of the temperature distribution model developed.

Comparison of implant-abutment interface misfits after casting and soldering procedures.

Science.gov (United States)

Neves, Flávio Domingues das; Elias, Gisele Araújo; da Silva-Neto, João Paulo; de Medeiros Dantas, Lucas Costa; da Mota, Adérito Soares; Neto, Alfredo Júlio Fernandes

2014-04-01

The aim of this study was to compare vertical and horizontal adjustments of castable abutments after conducting casting and soldering procedures. Twelve external hexagonal implants (3.75 × 10 mm) and their UCLA abutments were divided according their manufacturer and abutment type: PUN (plastic UCLA, Neodent), PUC (plastic UCLA, Conexão), PU3i (plastic UCLA, Biomet 3i), and PUTN (plastic UCLA with Tilite milled base, Neodent). Three infrastructures of a fixed partial implant-supported bridge with 3 elements were produced for each group. The measurements of vertical (VM) and horizontal (HM) misfits were obtained via scanning electron microscopy after completion of casting and soldering. The corresponding values were determined to be biomechanically acceptable to the system, and the results were rated as a percentage. Statistical analysis establishes differences between groups by chi-square after procedures, and McNeman's test was applied to analyze the influence of soldering over casting (α ≤ .05). For the values of VM and HM, respectively, when the casting process was complete, it was observed that 83.25% and 100% (PUTN), 33.3% and 27.75% (PUN), 33.3% and 88.8% (PUC), 33.3% and 94.35% (PU3i) represented acceptable values. After completing the requisite soldering, acceptable values were 50% and 94.35% (PUTN), 16.6% and 77.7% (PUN), 38.55% and 77.7% (PUC), and 27.75% and 94.35% (PU3i). Within the limitations of this study, it can be concluded that the premachined abutments presented more acceptable VM values. The HM values were within acceptable limits before and after the soldering procedure for most groups. Further, the soldering procedure resulted in an increase of VM in all groups.

Commercial versus in-situ usability testing of healthcare information systems: towards "public" usability testing in healthcare organizations.

Science.gov (United States)

Kushniruk, Andre W; Borycki, Elizabeth M; Kannry, Joseph

2013-01-01

The need for improved usability in healthcare IT has been widely recognized. In addition, methods from usability engineering, including usability testing and usability inspection have received greater attention. Many vendors of healthcare software are now employing usability testing methods in the design and development of their products. However, despite this, the usability of healthcare IT is still considered to be problematic and many healthcare organizations that have purchased systems that have been tested at vendor testing sites are still reporting a range of usability and safety issues. In this paper we explore the distinction between commercial usability testing (conducted at centralized vendor usability laboratories and limited beta test sites) and usability testing that is carried out locally within healthcare organizations that have purchased vendor systems and products (i.e. public "in-situ" usability testing). In this paper it will be argued that both types of testing (i.e. commercial vendor-based testing) and in-situ testing are needed to ensure system usability and safety.

Usability testing for dummies

CERN Multimedia

CERN. Geneva

2017-01-01

Usability testing seems complicated and time-consuming. Is it though? In fact, it is the best way to understand how real users experience your product. In this interactive session, we will do a live usability test and you will get advice on how to conduct your own usability tests.

Working together to improve usability

DEFF Research Database (Denmark)

Nørgaard, Mie; Hornbæk, Kasper

2010-01-01

In theory, usability work is an important and well-integrated activity in developing software. In practice, collaboration on improving usability is ridden with challenges relating to conflicting professional goals, tight project schedules, and unclear usability findings. The authors study those...... challenges through 16 interviews with software developers, usability experts, and project managers. Four themes that are key challenges to successful interaction between stakeholders are identified: poor timing when delivering usability results, results lacking relevance, little respect for other disciplines...

Design and Usability Evaluation of Social Mobile Diabetes Management System in the Gulf Region.

Science.gov (United States)

Alanzi, Turki; Istepanian, Robert; Philip, Nada

2016-09-26

The prevalence of diabetes in the Gulf States is one of the highest globally. It is estimated that 20% of the population in the region has been diagnosed with diabetes and according to the International Diabetes Federation (IDF), five of the IDF's "top 10" countries for diabetes prevalence in 2011 and projected for 2030 are in this region. In recent years, there have been an increasing number of clinical studies advocating the use of mobile phone technology for diabetes self-management with improved clinical outcomes. However, there are few studies to date addressing the application of mobile diabetes management in the Gulf region, particularly in the Kingdom of Saudi Arabia (KSA), where there is exponential increase in mobile phone usage and access to social networking. The objective of this paper is to present the design and development of a new mobile health system for social behavioral change and management tailored for Saudi patients with diabetes called Saudi Arabia Networking for Aiding Diabetes (SANAD). A usability study for the SANAD system is presented to validate the acceptability of using mobile technologies among patients with diabetes in the KSA and the Gulf region. The SANAD system was developed using mobile phone technology with diabetes management and social networking modules. For the usability study the Questionnaire for User Interaction Satisfaction was used to evaluate the usability aspect of the SANAD system. A total of 33 users with type 2 diabetes participated in the study. The key modules of the SANAD system consist of (1) a mobile diabetes management module; (2) a social networking module; and (3) a cognitive behavioral therapy module for behavioral change issues. The preliminary results of the usability study indicated general acceptance of the patients in using the system with higher usability rating in patients with type 2 diabetes. We found that the acceptability of the system was high among Saudi patients with diabetes, and ongoing

Demerit control chart as a decision support tool in quality control of ductile cast-iron casting process

Directory of Open Access Journals (Sweden)

Sika Robert

2017-01-01

Full Text Available In many industrial areas the product quality can be unequivocally assigned to classes such as: “good”, “bad” or “to repair”. In case of casting processes, the product is approved to sales considering customer’s requirements. Except for common characteristics, such as structure, compactness and mechanical properties, physical state of the product is also important. This state is assessed by checking occurrence of specific kind of defects. They are often conditionally accepted by a customer if they do not have any influence on functionality of the product (e.g. negative adhesive and cohesive phenomena, fatigue strength, thermal shocks. Authors’ experience shows that current registering of the most frequently occurring defects and comparing them to customers’ requirements can be very useful and help a quality engineer to control the casting process. They suggest using the Demerit Control Chart (DCC, according to authors’ own methodology, in aspect of information about the castings accepted conditionally by a customer (DCC-recognition. DCC-recognition can be used to assess this quality by monitoring the value of just one aggregated measure for all kinds of defects instead of using a single attribute control chart for each of them. The test version of this tool considering severity of defects proved to be useful in one of the European foundries.

Designing Telemedicine Systems for Geriatric Patients: A Review of the Usability Studies.

Science.gov (United States)

Narasimha, Shraddhaa; Madathil, Kapil Chalil; Agnisarman, Sruthy; Rogers, Hunter; Welch, Brandon; Ashok, Aparna; Nair, Aswathi; McElligott, James

2017-06-01

One area where telemedicine may prove to be highly effective is in providing medical care to the geriatric population, an age group predicted to account for 20% of the population in the near future. However, even though telemedicine has certain advantages, the usability of these systems with this population merits investigation. This article reviews the literature published from 2000 to 2016 with the goal of analyzing the characteristics of usability-related studies conducted using geriatric participants and the subsequent usability challenges identified. Articles were found using Web of Knowledge and PubMed citation indexing portals using the keywords (1) Telemedicine* AND Geriatrics* (2) Telemedicine* AND Usability* (3) Telemedicine* AND Usability* AND Older Adults*. A total of 297 articles were obtained from the initial search. After further detailed screening, 16 articles were selected for review based on the inclusion criteria. Of these, 60% of the studies focused on the overall usability of telemedicine systems; 6.25% focused on the usability of a telepresence robot; 12.5% compared a face-to-face medical consultation with the use of telemedicine systems, and 25% focused on the study of other aspects of telemedicine in addition to its usability. Findings reported in the studies included high patient satisfaction with telemedicine in 31.25%, whereas another 31.25% indicated a high acceptance of this method of medical consultation. Care coordination in 6.25% of the studies; confidence in telemedicine in 6.25%; trust, privacy, and reliability in 6.25%; and increased convenience when compared to personal visits in 18.75% were also reported. This review suggests limited research providing scientifically valid and reproducible usability evaluation at various stages of telemedicine system development. Telemedicine system designers need to consider the age-related issues in cognition, perception, and behavior of geriatric patients while designing telemedicine

Problems, acceptance and social inequality: a study of the deformed leprosy patients and their families.

Science.gov (United States)

Kopparty, S N

1995-09-01

Though the impact of social inequality on health conditions is widely known, its impact on the chronic and stigmatized disease, leprosy, has received little attention. Deformity sometimes leads to disabilities and to handicaps causing problems to the patient and his family. In this paper an attempt has been made to understand the impact of social inequality, prevalent in the form of the caste system in India on the deformed leprosy patients and on their families. This impact was examined in terms of the problems faced by the patients. A sample of 150 deformed patients and their families, drawn from two districts in Tamil Nadu, was selected for the study. About 57% of the deformed patients experienced their deformity as a handicap which caused social and economic problems while the rest did not. Of the three caste groups, the Lower Caste group experienced more severe economic problems while the Upper Caste group faced more social problems. The extent of acceptance of deformed patients in their family varied significantly among those facing and not facing problems due to their deformity. The deformed patients without any handicap were accepted in a large majority of their families (82%) regardless of their caste status. In contrast the deformed but handicapped patients were accepted differentially among the three caste groups with the Upper group accepting them in most of their families (80%) while in the Lower group much less number of families (54%) did. All the families of the deformed but not handicapped patients desired to keep their patients till their death irrespective of their caste status. On the contrary, while all the families in the Upper Caste group expressed their willingness to keep their handicapped patients in the family till their death, 10% in the Middle and 22% in the Lower Caste groups did not want to do so. This suggests the gradual marginalization, rejection and dehabilitation of the affected. Thus, one's caste status can be a broad indicator

Distributed usability evaluation

DEFF Research Database (Denmark)

Christensen, Lars; Frøkjær, Erik

2010-01-01

We present DUE (Distributed Usability Evaluation), a technique for collecting and evaluating usability data. The DUE infrastructure involves a client-server network. A client-based tool resides on the workstation of each user, providing a screen video recording, microphone input of voice commentary......, and a window for a severity rating. The idea is for the user to work naturalistically, clicking a button when a usability problem or point of uncertainty is encountered, to describe it verbally along with illustrating it on screen, and to rate its severity. These incidents are accumulated on a server......, providing access to an evaluator (usability expert) and to product developers or managers who want to review the incidents and analyse them. DUE supports evaluation in the development stages from running prototypes and onwards. A case study of the use of DUE in a corporate environment is presented...

A Usability Study of Users’ Perceptions Toward a Multimedia Computer-Assisted Learning Tool for Neuroanatomy

Science.gov (United States)

Gould, Douglas J.; Terrell, Mark A.; Fleming, Jo

2015-01-01

This usability study evaluated users’ perceptions of a multimedia prototype for a new e-learning tool: Anatomy of the Central Nervous System: A Multimedia Course. Usability testing is a collection of formative evaluation methods that inform the developmental design of e-learning tools to maximize user acceptance, satisfaction, and adoption. Sixty-two study participants piloted the prototype and completed a usability questionnaire designed to measure two usability properties: program need and program applicability. Statistical analyses were used to test the hypothesis that the multimedia prototype was well designed and highly usable, it was perceived as: 1) highly needed across a spectrum of educational contexts, 2) highly applicable in supporting the pedagogical processes of teaching and learning neuroanatomy, and 3) was highly usable by all types of users. Three independent variables represented user differences: level of expertise (faculty vs. student), age, and gender. Analysis of the results supports the research hypotheses that the prototype was designed well for different types of users in various educational contexts and for supporting the pedagogy of neuroanatomy. In addition, the results suggest that the multimedia program will be most useful as a neuroanatomy review tool for health-professions students preparing for licensing or board exams. This study demonstrates the importance of integrating quality properties of usability with principles of human learning during the instructional design process for multimedia products. PMID:19177405

Personal Usability Constructs

DEFF Research Database (Denmark)

Hertzum, Morten; Clemmensen, Torkil; Hornbæk, Kasper

2011-01-01

Whereas the concept of usability is predominantly defined analytically, people relate to systems through personal usability constructs. Based on 48 repertory-grid interviews, this study investigates how such personal constructs are affected by two factors crucial to the international development...

Cross cultural usability testing

DEFF Research Database (Denmark)

Clemmensen, Torkil; Goyal, Shivam

2005-01-01

In this paper, we present the results of a pilot study in Denmark of cross cultural effects on Think Aloud usability testing. We provide an overview of previous research on cross cultural usability evaluation with a special focus on the relationship between the evaluator and the test user....... This relation was studied in an experiment with usability testing of a localized clipart application in which eight participants from Denmark and India formed pairs of evaluator-test user. The test users were asked to think aloud and the evaluators' role were to facilitate the test users thinking aloud...... and hereby identify usability problems with the clipart application. Data on the evaluators' and test users' behaviour were recorded and analyzed by coding and summarizing statistics on these behavioural events. The results show that Think Aloud Usability Test of a localized application is most effectively...

Empirical usability testing in a component-based environment : improving test efficiency with component-specific usability measures

NARCIS (Netherlands)

Brinkman, W.P.; Haakma, R.; Bouwhuis, D.G.; Bastide, R.; Palanque, P.; Roth, J.

2005-01-01

This paper addresses the issue of usability testing in a component-based software engineering environment, specifically measuring the usability of different versions of a component in a more powerful manner than other, more holistic, usability methods. Three component-specific usability measures are

Implementation of a Computerized Screening Inventory: Improved Usability Through Iterative Testing and Modification.

Science.gov (United States)

Boudreaux, Edwin D; Fischer, Andrew Christopher; Haskins, Brianna Lyn; Saeed Zafar, Zubair; Chen, Guanling; Chinai, Sneha A

2016-03-09

The administration of health screeners in a hospital setting has traditionally required (1) clinicians to ask questions and log answers, which can be time consuming and susceptible to error, or (2) patients to complete paper-and-pencil surveys, which require third-party entry of information into the electronic health record and can be vulnerable to error and misinterpretation. A highly promising method that avoids these limitations and bypasses third-party interpretation is direct entry via a computerized inventory. To (1) computerize medical and behavioral health screening for use in general medical settings, (2) optimize patient acceptability and feasibility through iterative usability testing and modification cycles, and (3) examine how age relates to usability. A computerized version of 15 screeners, including behavioral health screeners recommended by a National Institutes of Health Office of Behavioral and Social Sciences Research collaborative workgroup, was subjected to systematic usability testing and iterative modification. Consecutive adult, English-speaking patients seeking treatment in an urban emergency department were enrolled. Acceptability was defined as (1) the percentage of eligible patients who agreed to take the assessment (initiation rate) and (2) average satisfaction with the assessment (satisfaction rate). Feasibility was defined as the percentage of the screening items completed by those who initiated the assessment (completion rate). Chi-square tests, analyses of variance, and Pearson correlations were used to detect whether improvements in initiation, satisfaction, and completion rates were seen over time and to examine the relation between age and outcomes. Of 2157 eligible patients approached, 1280 agreed to complete the screening (initiation rate=59.34%). Statistically significant increases were observed over time in satisfaction (F3,1061=3.35, P=.019) and completion rates (F3,1276=25.44, PUsability testing revealed several critical

Towards Usable E-Health. A Systematic Review of Usability Questionnaires.

Science.gov (United States)

Sousa, Vanessa E C; Dunn Lopez, Karen

2017-05-10

The use of e-health can lead to several positive outcomes. However, the potential for e-health to improve healthcare is partially dependent on its ease of use. In order to determine the usability for any technology, rigorously developed and appropriate measures must be chosen. To identify psychometrically tested questionnaires that measure usability of e-health tools, and to appraise their generalizability, attributes coverage, and quality. We conducted a systematic review of studies that measured usability of e-health tools using four databases (Scopus, PubMed, CINAHL, and HAPI). Non-primary research, studies that did not report measures, studies with children or people with cognitive limitations, and studies about assistive devices or medical equipment were systematically excluded. Two authors independently extracted information including: questionnaire name, number of questions, scoring method, item generation, and psychometrics using a data extraction tool with pre-established categories and a quality appraisal scoring table. Using a broad search strategy, 5,558 potentially relevant papers were identified. After removing duplicates and applying exclusion criteria, 35 articles remained that used 15 unique questionnaires. From the 15 questionnaires, only 5 were general enough to be used across studies. Usability attributes covered by the questionnaires were: learnability (15), efficiency (12), and satisfaction (11). Memorability (1) was the least covered attribute. Quality appraisal showed that face/content (14) and construct (7) validity were the most frequent types of validity assessed. All questionnaires reported reliability measurement. Some questionnaires scored low in the quality appraisal for the following reasons: limited validity testing (7), small sample size (3), no reporting of user centeredness (9) or feasibility estimates of time, effort, and expense (7). Existing questionnaires provide a foundation for research on e-health usability. However

Boron solubility in Fe-Cr-B cast irons

International Nuclear Information System (INIS)

Guo Changqing; Kelly, P.M.

2003-01-01

Boron solubility in the as-cast and solution treated martensite of Fe-Cr-B cast irons, containing approximately 1.35 wt.% of boron, 12 wt.% of chromium, as well as other alloying elements, has been investigated using conventional microanalysis. The significant microstructural variations after tempering at 750 deg. C for 0.5-4 h, compared with the original as-cast and solution treated microstructures, indicated that the matrix consisted of boron and carbon supersaturated solid solutions. The boron solubility detected by electron microprobe was between 0.185-0.515 wt.% for the as-cast martensite and 0.015-0.0589 wt.% for the solution treated martensite, much higher than the accepted value of 0.005 wt.% in pure iron. These remarkable increases are thought to be associated with some metallic alloying element addition, such as chromium, vanadium and molybdenum, which have atomic diameters larger than iron, and expand the iron lattice to sufficiently allow boron atoms to occupy the interstitial sites in iron lattice

Hydrogenation study of suction-cast Ti{sub 40}Zr{sub 40}Ni{sub 20} quasicrystal

Energy Technology Data Exchange (ETDEWEB)

Huang, Huogen; Li, Rong; Yin, Chen; Zheng, Shaotao; Zhang, Pengcheng [National Key Laboratory for Surface Physics and Chemistry, P.O. Box 718-35, Mian Yang 621907, Sichuan (China)

2008-09-15

Suction casting was predicted to be an usable method for improving the hydriding kinetics of Ti/Zr-based icosahedral quasicrystals (IQCs) in our previous work. To further determine it, a suction-cast Ti{sub 40}Zr{sub 40}Ni{sub 20} IQC alloy was used for hydrogenation studies by Pressure Composition Isotherm (PCI) and Temperature Programmed Desorption (TPD) techniques. The results showed that, this alloy absorbed hydrogen rapidly with obvious hydrogen pressure plateau and some reversibility, however, displayed very limited hydrogen capacity (about 0.7 wt.%) and low equilibrium pressure. After several hydrogenation/dehydrogenation cycles, the IQC structure transformed into two hydride phases, ZrH{sub 2-x} and one unknown, both of which decomposed at above 600 C, suggesting high thermo-stability for them. On the whole, indeed the suction-casting method can increase the hydrogen absorption rate of Ti/Zr-based IQCs, however, the hydrogenation properties of the Ti{sub 40}Zr{sub 40}Ni{sub 20} IQC alloy still need a mighty advancement. (author)

Radiographic Co-60 in component of heavy equipment casting

International Nuclear Information System (INIS)

Djoli Soembogo, Harun Al Rasyid R dan Namad Sianta

2016-01-01

The application of radiography using isotope Co-60 source has been used on component of heavy equipment such as component of heavy equipment casting. Components of heavy equipment casting made through metal casting of carbon steel. This study tried applying digital radiography are using isotope Co-60 sources and using scanning positive film media of Epson V700 for digitization results of conventional radiographic films. This radiography is using film AGFA D7 and Fuji 100 to obtain a contrast medium, medium sensitivity and image quality is good. The purpose radiographic Co-60 at a component of heavy equipment casting is detecting indications of the shape and type casting defects of component of heavy equipment casting thus fit for use. Radiographic test of Co-60 has been carried out on component of heavy equipment casting with single wall single image method and the results of radiographic films digitization using scanning positive film media of Epson V700 with observation parameters casting defects. Time exposure of Co-60 radiation was 10 and 15 minutes hours for metal castings of carbon steel for thickness 20.00-50.00 mm by using activity 30.05 Ci and the perpendicular distance to the source of the film is 820 mm. Scanner positive film results in the form of digital radiography which allow for the transfer of digital data or digital computerized data storage. Radiographic test results on component of heavy equipment casting with single wall single image method produce the parameter casting defect of component of heavy equipment casting in position of critical area is found shrinkage that should be repaired and in position of safety area is not found defect indication so casting defect of component of heavy equipment casting are not acceptable according to standards referenced. (author)

Tibia Shaft Fractures in Adolescents: How and When Can They be Managed Successfully With Cast Treatment?

Science.gov (United States)

Ho, Christine A

2016-06-01

Despite the increasing popularity of operative treatment in adolescent tibia fractures, casting remains a viable first-line treatment. Because the selection bias in published reports does not allow direct comparison between casting and flexible nail treatment of closed pediatric tibia fractures, it is unclear whether flexible nailing offers any advantages over casting. This overview discusses parameters of acceptable alignment, indications, techniques for successful reduction and casting, subsequent inpatient and outpatient management including wedging of casted tibia fractures, expected outcomes, and comparison of casting with flexible nailing. As with any orthopaedic procedure, careful attention to patient selection, indications, and detail facilitates successful cast treatment in this older pediatric population.

Usability at the CELSTEC Medialab

NARCIS (Netherlands)

Storm, Jeroen; Kostons, Danny

2009-01-01

Storm, J., & Kostons, D. (2009). Usability at the CELSTEC MediaLab. Presentation about the usability testing, usability research and User Centered Design conducted at the CELSTEC MediaLab. July, 7, 2009, Heerlen, The Netherlands: Open University of the Netherlands.

Dimensional accuracy and surface property of titanium casting using gypsum-bonded alumina investment.

Science.gov (United States)

Yan, Min; Takahashi, Hidekazu; Nishimura, Fumio

2004-12-01

The aim of the present study was to evaluate the dimensional accuracy and surface property of titanium casting obtained using a gypsum-bonded alumina investment. The experimental gypsum-bonded alumina investment with 20 mass% gypsum content mixed with 2 mass% potassium sulfate was used for five cp titanium castings and three Cu-Zn alloy castings. The accuracy, surface roughness (Ra), and reaction layer thickness of these castings were investigated. The accuracy of the castings obtained from the experimental investment ranged from -0.04 to 0.23%, while surface roughness (Ra) ranged from 7.6 to 10.3microm. A reaction layer of about 150 microm thickness under the titanium casting surface was observed. These results suggested that the titanium casting obtained using the experimental investment was acceptable. Although the reaction layer was thin, surface roughness should be improved.

[Research on investing methods and mold cooling methods of the self-made investment for pure titanium castings].

Science.gov (United States)

Zhao, Juan; Huang, Xu; Zhao, Yun-Feng; Xiao, Mao-Chun; Li, Yong

2006-10-01

To observe the influence of different investing methods and mold cooling methods on pure titanium castings invested in the self-made investment, and to provide theoretic base for the development for the investment. The influence of investing methods (one-step investing method and two-step investing method) on castability and crown fit of titanium castings were investigated, and the influence of cooling methods on reaction layers, mechanical properties and crown fit of titanium castings were investigated. Both the investing methods exhibited good castability, but only the titanium full crowns by one-step investing method showed clinically acceptable fit. Although the quenching group showed thinner reaction layer(100 microm), lower strength and similar elongation rate, the titanium castings by bench cooling showed clinically acceptable full crown fit with 115 microm thick reaction layer as cast. The one-step investing method and the bench cooling are recommended for the self-made investment.

Usability Study of a Computer-Based Self-Management System for Older Adults with Chronic Diseases

Science.gov (United States)

Tao, Da

2012-01-01

Background Usability can influence patients’ acceptance and adoption of a health information technology. However, little research has been conducted to study the usability of a self-management health care system, especially one geared toward elderly patients. Objective This usability study evaluated a new computer-based self-management system interface for older adults with chronic diseases, using a paper prototype approach. Methods Fifty older adults with different chronic diseases participated. Two usability evaluation methods were involved: (1) a heuristics evaluation and (2) end-user testing with a think-aloud testing method, audio recording, videotaping, and interviewing. A set of usability metrics was employed to determine the overall system usability, including task incompletion rate, task completion time, frequency of error, frequency of help, satisfaction, perceived usefulness, and perceived ease of use. Interviews were used to elicit participants’ comments on the system design. The quantitative data were analyzed using descriptive statistics and the qualitative data were analyzed for content. Results The participants were able to perform the predesigned self-management tasks with the current system design and they expressed mostly positive responses about the perceived usability measures regarding the system interface. However, the heuristics evaluation, performance measures, and interviews revealed a number of usability problems related to system navigation, information search and interpretation, information presentation, and readability. Design recommendations for further system interface modifications were discussed. Conclusions This study verified the usability of the self-management system developed for older adults with chronic diseases. Also, we demonstrated that our usability evaluation approach could be used to quickly and effectively identify usability problems in a health care information system at an early stage of the system development

Acceptance on Mobile Learning via SMS: A Rasch Model Analysis

Directory of Open Access Journals (Sweden)

Issham Ismail

2010-04-01

Full Text Available This study investigated whether mobile learning via Short Message Service (SMS-learning is accepted by the students enrolled in the distance learning academic programme in the Universiti Sains Malaysia. This study explored the impact of perceived usefulness, perceived ease of use and usability of the system to their acceptability. The survey was constructed using a questionnaire consisting of statements regarding the participants’ demographics, experiences in and perception of using mobile learning via SMS, involving 105 students from management and sciences disciplines. The Rasch Model Analysis was used for measurement correspond to a 5 point Likert. Results indicated that the usability of the system contributed to be effectiveness in assisting the students with their study. Respondents agree that SMS-learning is easy, effective and useful to help them study. However, the results found that there has been a problem in mobile learning that less interaction with lecturers. It implies that the acceptability of students to this mode on communication and interaction is highly endorsed.

Usability testing a practical guide for librarians

CERN Document Server

Blakiston, Rebecca

2014-01-01

Do you want to improve the usability of your library website, but feel that it is too difficult, time-consuming, or expensive? Usability Testing: A Practical Guide for Librarians will teach you how to make the case for usability testing, define your audience and their goals, select a usability testing method appropriate for your particular context, plan for an in-house usability test, conduct an effective in-house usability test, analyze usability test results, and create and implement a plan for ongoing, systematic usability testing. Step-by-step instructions, along with a myriad of examples,

Evaluation of cast creep occurring during simulated clubfoot correction.

Science.gov (United States)

Cohen, Tamara L; Altiok, Haluk; Wang, Mei; McGrady, Linda M; Krzak, Joseph; Graf, Adam; Tarima, Sergey; Smith, Peter A; Harris, Gerald F

2013-08-01

The Ponseti method is a widely accepted and highly successful conservative treatment of pediatric clubfoot involving weekly manipulations and cast applications. Qualitative assessments have indicated the potential success of the technique with cast materials other than standard plaster of Paris. However, guidelines for clubfoot correction based on the mechanical response of these materials have yet to be investigated. The current study sought to characterize and compare the ability of three standard cast materials to maintain the Ponseti-corrected foot position by evaluating cast creep response. A dynamic cast testing device, built to model clubfoot correction, was wrapped in plaster of Paris, semi-rigid fiberglass, and rigid fiberglass. Three-dimensional motion responses to two joint stiffnesses were recorded. Rotational creep displacement and linearity of the limb-cast composite were analyzed. Minimal change in position over time was found for all materials. Among cast materials, the rotational creep displacement was significantly different (p creep displacement occurred in the plaster of Paris (2.0°), then the semi-rigid fiberglass (1.0°), and then the rigid fiberglass (0.4°). Torque magnitude did not affect creep displacement response. Analysis of normalized rotation showed quasi-linear viscoelastic behavior. This study provided a mechanical evaluation of cast material performance as used for clubfoot correction. Creep displacement dependence on cast material and insensitivity to torque were discovered. This information may provide a quantitative and mechanical basis for future innovations for clubfoot care.

Identifying Ghanaian Pre-Service Teachers' Readiness for Computer Use: A Technology Acceptance Model Approach

Science.gov (United States)

Gyamfi, Stephen Adu

2016-01-01

This study extends the technology acceptance model to identify factors that influence technology acceptance among pre-service teachers in Ghana. Data from 380 usable questionnaires were tested against the research model. Utilising the extended technology acceptance model (TAM) as a research framework, the study found that: pre-service teachers'…

Development of a Weight Loss Mobile App Linked With an Accelerometer for Use in the Clinic: Usability, Acceptability, and Early Testing of its Impact on the Patient-Doctor Relationship.

Science.gov (United States)

Choo, Seryung; Kim, Ju Young; Jung, Se Young; Kim, Sarah; Kim, Jeong Eun; Han, Jong Soo; Kim, Sohye; Kim, Jeong Hyun; Kim, Jeehye; Kim, Yongseok; Kim, Dongouk; Steinhubl, Steve

2016-03-31

Although complications of obesity are well acknowledged and managed by clinicians, management of obesity itself is often difficult, which leads to its underdiagnosis and undertreatment in hospital settings. However, tools that could improve the management of obesity, including self-monitoring, engagement with a social network, and open channels of communication between the patient and doctor, are limited in a clinic-based setting. The objective of our study was to evaluate the usability and acceptability of a newly developed mobile app linked with an accelerometer and its early effects on patient-doctor relationships. From September 2013 to February 2014, we developed a mobile app linked with an accelerometer as a supportive tool for a clinic-based weight loss program. The app used information from electronic health records and delivered tailored educational material. Personal goal setting, as well as monitoring of weight changes and physical activity combined with feedback, are key features of the app. We also incorporated an interactive message board for patients and doctors. During the period of March 2014 to May 2014, we tested our mobile app for 1 month in participants in a hospital clinic setting. We assessed the app's usability and acceptability, as well as the patient-doctor relationship, via questionnaires and analysis of app usage data. We recruited 30 individuals (18 male and 12 female) for the study. The median number of log-ins per day was 1.21, with the most frequently requested item being setting goals, followed by track physical activities and view personal health status. Scales of the depth of the patient-doctor relationship decreased from 27.6 (SD 4.8) to 25.1 (SD 4.5) by a Wilcoxon signed rank test (P=.02). A mobile phone app linked with an accelerometer for a clinic-based weight loss program is useful and acceptable for weight management but exhibited less favorable early effects on patient-doctor relationships.

Software architecture analysis of usability

NARCIS (Netherlands)

Folmer, Eelke

2005-01-01

One of the qualities that has received increased attention in recent decades is usability. A software product with poor usability is likely to fail in a highly competitive market; therefore software developing organizations are paying more and more attention to ensuring the usability of their

Evaluating Web Usability

Science.gov (United States)

Snider, Jean; Martin, Florence

2012-01-01

Web usability focuses on design elements and processes that make web pages easy to use. A website for college students was evaluated for underutilization. One-on-one testing, focus groups, web analytics, peer university review and marketing focus group and demographic data were utilized to conduct usability evaluation. The results indicated that…

Toward more usable electronic voting: testing the usability of a smartphone voting system.

Science.gov (United States)

Campbell, Bryan A; Tossell, Chad C; Byrne, Michael D; Kortum, Philip

2014-08-01

The goal of this research was to assess the usability of a voting system designed for smart-phones. Smartphones offer remote participation in elections through the use of pervasive technology. Voting on these devices could, among other benefits, increase voter participation while allowing voters to use familiar technology. However, the usability of these systems has not been assessed. A mobile voting system optimized for use on a smartphone was designed and tested against traditional voting platforms for usability. There were no reliable differences between the smartphone-based system and other voting methods in efficiency and perceived usability. More important, though, smartphone owners committed fewer errors on the mobile voting system than on the traditional voting systems. Even with the known limitations of small mobile platforms in both displays and controls, a carefully designed system can provide a usable voting method. Much of the concern about mobile voting is in the area of security; therefore, although these results are promising, security concerns and usability issues arising from mitigating them must be strongly considered. The results of this experiment may help to inform current and future election and public policy officials about the benefits of allowing voters to vote with familiar hardware.

Nodular cast iron and casting monitoring

Directory of Open Access Journals (Sweden)

S. Pietrowski

2008-10-01

Full Text Available In this paper quality monitoring of nodular cast iron and casting made of it is presented. A control system of initial liquid cast iron to spheroidization, after spheroidization and inoculation with using of TDA method was shown. An application of an ultrasonic method to assessment of the graphite form and the metal matrix microstructure of castings was investigated.

Systematic review of spica casting for the treatment of paediatric diaphyseal femur fractures.

Science.gov (United States)

Tisherman, R T; Hoellwarth, J S; Mendelson, S A

2018-04-01

Paediatric femur fractures are commonly encountered and often successfully managed with spica casting. Despite spica casting's long history there is little formal guidance for optimal outcomes and no consolidation of existing literature. The purpose of this study is to review the available literature regarding the use of spica casting for the management of paediatric diaphyseal femur fractures. The PubMed database was queried for all research articles including the phrase "spica". A total of 788 abstracts were reviewed for relevance to the current study. Data was extracted from all available research studies which specified tolerance for fracture angulation or shortening in the cast. Additionally, all articles describing alternative materials, methods for spica application, and complications of spica casting were reviewed. In all, 106 articles were found relevant to the management of diaphyseal femur fractures in the paediatric population. The aggregated, accepted fracture shortening decreased from 16 mm to 18 mm before age ten years to 12 mm to 14 mm after puberty. Aggregated, accepted angulation decreased from 14° to 16° varus/valgus and 18° to 22° pro/recurvatum before age two years, to 6° to 8° and 10° to 12° by puberty, respectively. The overall reported complication rate was 19.6%, with the most common complication being skin compromise in 8.2% of patients, followed by unacceptable angulation at the fracture site in 4.2% of patients and excessive limb shortening in 1.9% of patients. This article reviews the available spica casting literature and compiles the available data. Spica casting offers a safe, effective means for definitive management of paediatric diaphyseal femur fractures. Future research identifying the rate and pattern of remodelling as it relates to angulation and shortening at various patient ages, particularly beyond the aforementioned norms, would be valuable to identify true biological tolerances versus accepted expert opinion

Mechanical strength parameters of cast iron with lamellar graphite and their significance for the design of pressure-carrying reactor components

International Nuclear Information System (INIS)

Janakiev, N.

1977-01-01

The tensile strength of thick-walled components in cast iron with lamellar graphite is lower by about 50 to 65% than that stated in DIN 1691. The usable compressive strength of this material under uni-axial load is about twice as high as its tensile strength. The graphite lamellae are not bonded into the metallic matrix. The width of the gaps between the graphite lamellae and the matrix increases with increasing wall thickness of the casting. In stress calculations for design purposes it is advisable to rely only on the permissible tensile stresses. It is shown that cast iron can be used as structural material for shieldings but is unsuitable for thick-walled reactor components carrying compressive and tensile stresses because its mechanical strength parameters decrease rapidly with increasing wall thickness. (orig.) [de

Responsibilities in the Usability Requirements Elicitation Process

Directory of Open Access Journals (Sweden)

Marianella Aveledo

2008-12-01

Full Text Available Like any other software system quality attribute, usability places requirements on software components. In particular, it has been demonstrated that certain usability features have a direct impact throughout the software process. This paper details an approach that looks at how to deal with certain usability features in the early software development stages. In particular, we consider usability features as functional usability requirements using patterns that have been termed usability patterns to elicit requirements. Additionally, we clearly establish the responsibilities of all the players at the usability requirements elicitation stage.

What makes an automated teller machine usable by blind users?

Science.gov (United States)

Manzke, J M; Egan, D H; Felix, D; Krueger, H

1998-07-01

Fifteen blind and sighted subjects, who featured as a control group for acceptance, were asked for their requirements for automated teller machines (ATMs). Both groups also tested the usability of a partially operational ATM mock-up. This machine was based on an existing cash dispenser, providing natural speech output, different function menus and different key arrangements. Performance and subjective evaluation data of blind and sighted subjects were collected. All blind subjects were able to operate the ATM successfully. The implemented speech output was the main usability factor for them. The different interface designs did not significantly affect performance and subjective evaluation. Nevertheless, design recommendations can be derived from the requirement assessment. The sighted subjects were rather open for design modifications, especially the implementation of speech output. However, there was also a mismatch of the requirements of the two subject groups, mainly concerning the key arrangement.

Commentary: Usability – A Sensitizing Concept

DEFF Research Database (Denmark)

Hertzum, Morten

2018-01-01

In his article “The Usability Construct: A Dead End?”, Tractinsky (in Human-Computer Interaction) contends that for scientific research on usability to progress, the usability construct should be unbundled and replaced by well-defined constructs. This contention is presented as the conclusion...... that follows naturally from taking a scientist’s viewpoint on usability. Similar calls for definitive concepts – constructs in Tractinsky’s terminology – have been made in other scientific fields with concepts as ambiguous as that of usability. But counterarguments have also been presented....

Analysis in usability evaluations

DEFF Research Database (Denmark)

Følstad, Asbjørn; Lai-Chong Law, Effie; Hornbæk, Kasper

2010-01-01

While the planning and implementation of usability evaluations are well described in the literature, the analysis of the evaluation data is not. We present interviews with 11 usability professionals on how they conduct analysis, describing the resources, collaboration, creation of recommendations......, and prioritization involved. The interviews indicate a lack of structure in the analysis process and suggest activities, such as generating recommendations, that are unsupported by existing methods. We discuss how to better support analysis, and propose four themes for future research on analysis in usability...

Mobile Usability

DEFF Research Database (Denmark)

Aryana, Bijan; Clemmensen, Torkil

2013-01-01

In this article, a country specific comparative mobile usability study is presented, using Iran and Turkey as the two chosen emerging/emergent nation exemplars of smartphone usage and adoption. In a focus group study, three mobile applications were selected by first-time users of smartphones...... personal contacts. The results and analysis establish the existence of country specific issues and concerns, as well as reveal generic usability issues. The article concludes that the source of these issues is most likely due to a combination of certain contextual features endemic to both Iran and Turkey...

Ionizing radiation detection meter systems usability evaluation. Technical memorandum

International Nuclear Information System (INIS)

Severs, Y.; Hughes, R.; Tack, D.; Bossi, L.L.M.

2002-12-01

In support of the Canadian Forces Nuclear Detection, Identification and Dosimetry project a usability trial of three Ionizing Radiation Detection Meter Systems (IRDMS) was conducted 18-22 June 2001 at Connaught Ranges. The systems evaluated: System 1: ANPDR 77 Operational System with PDR 77 Alpha/Beta probes and GPS (Global Positioning System) Training System; System 2: ADM 300C Operational System with ABP 100 Alpha/Beta probes and GPS Training System, and System 3: RAM R200 Operational System with PA 100M and RG12 Alpha/Beta probes and GPS Training System. Twelve military personnel (Private to Captain) determined compliance with the bid evaluation criteria. The counter-balanced study, based on a Latin square design, was divided into two assessment phases, an operational phase and a training system phase, which rotated three groups (of four participants each) concurrently through each IRDMS. Groups were trained in set-up, maintenance and operation of each bid IRDMS prior to evaluation. The operational evaluation consisted of a test/maintenance stand, an indoor/outdoor operational stand, and an indoor,/outdoor training system stand. Participants rated the utility and usability of each system, by measuring case of use/maintenance under a range of relevant operational and clothing conditions, compatibility with soldier tasks, compatibility with clothing, compatibility with equipment and operational environments, and case of learning (including an assessment of initial and refresher training implications). A 7-point Likert-like acceptability rating scale, which covered a range from completely unacceptable (1) to completely acceptable (7), was used to evaluate the measures. The combined weighted mean scores were 584.3 for System 1 (70 o /b), 682.0 for System 2 (81 %) and 756.9 for System 3 (90%) out of a total possible score of 840. Participants reported mean scores for System 1 between barely unacceptable and borderline for both indoor and outdoor operations. System 2

Assessing the Acceptability and Usability of an Internet-Based Intelligent Health Assistant Developed for Use among Turkish Migrants: Results of a Study Conducted in Bremen, Germany

Directory of Open Access Journals (Sweden)

Florence Samkange-Zeeb

2015-12-01

Full Text Available The Internet offers a new chance for health professionals to reach population groups not usually reached through traditional information channels, for example, migrants. Criticism has, however, been raised that most health information on the Internet is not easy to read and lacks cultural sensitivity. We developed an Internet-based bilingual health assistant especially for Turkish migrants in Germany, tested its acceptance, and evaluated its usability in a participatory research design with families with and without Turkish migrant background. The interactive health assistant covered the following: nutrition, physical activity, overweight, diabetes, as well as pregnancy and pregnancy support. The idea of an Internet-based health assistant was generally accepted by all participants of the evaluation study, as long as it would be incorporated in existing appliances, such as smartphones. The bilingual nature of the assistant was welcomed especially by first generation migrants, but migrant participants also indicated that not all health information needed to be made available in a culture-specific way. The participants were least satisfied with the nutrition component, which they felt should include recipes and ingredients from the culture of origin, as well as specific aspects of food preparation.

Assessing the Acceptability and Usability of an Internet-Based Intelligent Health Assistant Developed for Use among Turkish Migrants: Results of a Study Conducted in Bremen, Germany.

Science.gov (United States)

Samkange-Zeeb, Florence; Ernst, Sinja Alexandra; Klein-Ellinghaus, Funda; Brand, Tilman; Reeske-Behrens, Anna; Plumbaum, Till; Zeeb, Hajo

2015-12-03

The Internet offers a new chance for health professionals to reach population groups not usually reached through traditional information channels, for example, migrants. Criticism has, however, been raised that most health information on the Internet is not easy to read and lacks cultural sensitivity. We developed an Internet-based bilingual health assistant especially for Turkish migrants in Germany, tested its acceptance, and evaluated its usability in a participatory research design with families with and without Turkish migrant background. The interactive health assistant covered the following: nutrition, physical activity, overweight, diabetes, as well as pregnancy and pregnancy support. The idea of an Internet-based health assistant was generally accepted by all participants of the evaluation study, as long as it would be incorporated in existing appliances, such as smartphones. The bilingual nature of the assistant was welcomed especially by first generation migrants, but migrant participants also indicated that not all health information needed to be made available in a culture-specific way. The participants were least satisfied with the nutrition component, which they felt should include recipes and ingredients from the culture of origin, as well as specific aspects of food preparation.

Assessing the Acceptability and Usability of an Internet-Based Intelligent Health Assistant Developed for Use among Turkish Migrants: Results of a Study Conducted in Bremen, Germany

Science.gov (United States)

Samkange-Zeeb, Florence; Ernst, Sinja Alexandra; Klein-Ellinghaus, Funda; Brand, Tilman; Reeske-Behrens, Anna; Plumbaum, Till; Zeeb, Hajo

2015-01-01

The Internet offers a new chance for health professionals to reach population groups not usually reached through traditional information channels, for example, migrants. Criticism has, however, been raised that most health information on the Internet is not easy to read and lacks cultural sensitivity. We developed an Internet-based bilingual health assistant especially for Turkish migrants in Germany, tested its acceptance, and evaluated its usability in a participatory research design with families with and without Turkish migrant background. The interactive health assistant covered the following: nutrition, physical activity, overweight, diabetes, as well as pregnancy and pregnancy support. The idea of an Internet-based health assistant was generally accepted by all participants of the evaluation study, as long as it would be incorporated in existing appliances, such as smartphones. The bilingual nature of the assistant was welcomed especially by first generation migrants, but migrant participants also indicated that not all health information needed to be made available in a culture-specific way. The participants were least satisfied with the nutrition component, which they felt should include recipes and ingredients from the culture of origin, as well as specific aspects of food preparation. PMID:26633455

Friction Stir Processing Parameters and Property Distributions in Cast Nickel Aluminum Bronze

National Research Council Canada - National Science Library

Rosemark, Brian P

2006-01-01

Cast nickel-aluminum bronze (NAB) alloy is specified for many marine applications, including ship propellers, due to its excellent corrosion-resistance combined with acceptable mechanical properties...

Casting Technology.

Science.gov (United States)

Wright, Michael D.; And Others

1992-01-01

Three articles discuss (1) casting technology as it relates to industry, with comparisons of shell casting, shell molding, and die casting; (2) evaporative pattern casting for metals; and (3) high technological casting with silicone rubber. (JOW)

Expanding Interaction Potentials within Virtual Environments: Investigating the Usability of Speech and Manual Input Modes for Decoupled Interaction

Directory of Open Access Journals (Sweden)

Alex Stedmon

2011-01-01

Full Text Available Distributed technologies and ubiquitous computing now support users who may be detached or decoupled from traditional interactions. In order to investigate the potential usability of speech and manual input devices, an evaluation of speech input across different user groups and a usability assessment of independent-user and collaborative-user interactions was conducted. Whilst the primary focus was on a formative usability evaluation, the user group evaluation provided a formal basis to underpin the academic rigor of the exercise. The results illustrate that using a speech interface is important in understanding user acceptance of such technologies. From the usability assessment it was possible to translate interactions and make them compatible with innovative input devices. This approach to interaction is still at an early stage of development, and the potential or validity of this interfacing concept is still under evaluation; however, as a concept demonstrator, the results of these initial evaluations demonstrate the potential usability issues of both input devices as well as highlighting their suitability for advanced virtual applications.

Work-domain knowledge in usability evaluation

DEFF Research Database (Denmark)

Følstad, Asbjørn; Hornbæk, Kasper

2010-01-01

Usability evaluation helps to determine whether interactive systems support users in their work tasks. However, knowledge about those tasks and, more generally, about the work-domain is difficult to bring to bear on the processes and outcome of usability evaluation. One way to include such work......-domain knowledge might be Cooperative Usability Testing, an evaluation method that consists of (a) interaction phases, similar to classic usability testing, and (b) interpretation phases, where the test participant and the moderator discuss incidents and experiences from the interaction phases. We have studied...... whether such interpretation phases improve the relevance of usability evaluations in the development of work-domain specific systems. The study included two development cases. We conclude that the interpretation phases generate additional insight and redesign suggestions related to observed usability...

Towards a Usability and Error "Safety Net": A Multi-Phased Multi-Method Approach to Ensuring System Usability and Safety.

Science.gov (United States)

Kushniruk, Andre; Senathirajah, Yalini; Borycki, Elizabeth

2017-01-01

The usability and safety of health information systems have become major issues in the design and implementation of useful healthcare IT. In this paper we describe a multi-phased multi-method approach to integrating usability engineering methods into system testing to ensure both usability and safety of healthcare IT upon widespread deployment. The approach involves usability testing followed by clinical simulation (conducted in-situ) and "near-live" recording of user interactions with systems. At key stages in this process, usability problems are identified and rectified forming a usability and technology-induced error "safety net" that catches different types of usability and safety problems prior to releasing systems widely in healthcare settings.

Quality and Usability of Arthritic Pain Self-Management Apps for Older Adults: A Systematic Review.

Science.gov (United States)

Bhattarai, Priyanka; Newton-John, T R O; Phillips, Jane L

2018-03-01

To appraise the quality and usability of currently available pain applications that could be used by community-dwelling older adults to self-manage their arthritic pain. A systematic review. Searches were conducted in App Store and Google Play to identify pain self-management apps relevant to arthritic pain management. English language pain management apps providing pain assessment and documentation function and pain management education were considered for inclusion. A quality evaluation audit tool based on the Stanford Arthritis Self-Management Program was developed a priori to evaluate app content quality. The usability of included apps was assessed using an established usability evaluation tool. Out of the 373 apps that were identified, four met the inclusion criteria. The included apps all included a pain assessment and documentation function and instructions on medication use, communication with health professionals, cognitive behavioral therapy-based pain management, and physical exercise. Management of mood, depression, anxiety, and sleep were featured in most apps (N = 3). Three-quarters (N = 3) of the apps fell below the acceptable moderate usability score (≥3), while one app obtained a moderate score (3.2). Few of the currently available pain apps offer a comprehensive pain self-management approach incorporating evidence-based strategies in accordance with the Stanford Arthritis Self-Management Program. The moderate-level usability across the included apps indicates a need to consider the usability needs of the older population in future pain self-management app development endeavors.

VA FitHeart, a Mobile App for Cardiac Rehabilitation: Usability Study.

Science.gov (United States)

Beatty, Alexis L; Magnusson, Sara L; Fortney, John C; Sayre, George G; Whooley, Mary A

2018-01-15

Cardiac rehabilitation (CR) improves outcomes for patients with ischemic heart disease or heart failure but is underused. New strategies to improve access to and engagement in CR are needed. There is considerable interest in technology-facilitated home CR. However, little is known about patient acceptance and use of mobile technology for CR. The aim of this study was to develop a mobile app for technology-facilitated home CR and seek to determine its usability. We recruited patients eligible for CR who had access to a mobile phone, tablet, or computer with Internet access. The mobile app includes physical activity goal setting, logs for tracking physical activity and health metrics (eg, weight, blood pressure, and mood), health education, reminders, and feedback. Study staff demonstrated the mobile app to participants in person and then observed participants completing prespecified tasks with the mobile app. Participants completed the System Usability Scale (SUS, 0-100), rated likelihood to use the mobile app (0-100), questionnaires on mobile app use, and participated in a semistructured interview. The Unified Theory of Acceptance and Use of Technology and the Theory of Planned Behavior informed the analysis. On the basis of participant feedback, we made iterative revisions to the mobile app between users. We conducted usability testing in 13 participants. The first version of the mobile app was used by the first 5 participants, and revised versions were used by the final 8 participants. From the first version to revised versions, task completion success rate improved from 44% (11/25 tasks) to 78% (31/40 tasks; P=.05), SUS improved from 54 to 76 (P=.04; scale 0-100, with 100 being the best usability), and self-reported likelihood of use remained high at 76 and 87 (P=.30; scale 0-100, with 100 being the highest likelihood). In interviews, patients expressed interest in tracking health measures ("I think it'll be good to track my exercise and to see what I'm doing

The effects of protoype medium on usability testing.

Science.gov (United States)

Boothe, Chase; Strawderman, Lesley; Hosea, Ethan

2013-11-01

Inconsistencies among testing methods and results in previous research prompted this study that builds upon a systematic usability testing research framework to better understand how interface medium influences users' abilities to detect usability flaws in applications. Interface medium was tested to identify its effects on users' perceptions of usability and abilities to detect usability problems and severe usability problems. Results indicated that medium has no effect on users' abilities to detect usability problems or perceptions of usability. However, results did indicate an interaction between the medium and the tested application in which users were able to identify significantly more usability problems on a higher fidelity medium using a particular application. Results also indicated that as users' perceptions of an application's usability increases, the users are less able to detect usability problems in that application. Usability testing should begin early in the design process, even if low fidelity mediums will be used. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The Usability Expert’s Fear of Agility

DEFF Research Database (Denmark)

Nielsen, Lene; Madsen, Sabine

2012-01-01

This paper contributes to the HCI literature on usability practice with insights about the empirical challenges and global emerging practices caused by the advent of agile software development (ASD). In the paper we report from a worldwide study involving 12 usability professionals from 12...... different countries. The findings show that the usability professionals share a forced development and innovation in their practice that stem from their clients’ adoption and use of ASD methods. The ASD methods challenge the way usability testing is performed, the abilities of the usability expert......, the usability deliverables, and the experts’ assumptions about the importance of validity....

Usability of Commercially Available Mobile Applications for Diverse Patients.

Science.gov (United States)

Sarkar, Urmimala; Gourley, Gato I; Lyles, Courtney R; Tieu, Lina; Clarity, Cassidy; Newmark, Lisa; Singh, Karandeep; Bates, David W

2016-12-01

Mobile applications or 'apps' intended to help people manage their health and chronic conditions are widespread and gaining in popularity. However, little is known about their acceptability and usability for low-income, racially/ethnically diverse populations who experience a disproportionate burden of chronic disease and its complications. The objective of this study was to investigate the usability of existing mobile health applications ("apps") for diabetes, depression, and caregiving, in order to facilitate development and tailoring of patient-facing apps for diverse populations. Usability testing, a mixed-methods approach that includes interviewing and direct observation of participant technology use, was conducted with participants (n = 9 caregivers; n = 10 patients with depression; and n = 10 patients with diabetes) on a total of 11 of the most popular health apps (four diabetes apps, four depression apps, and three caregiver apps) on both iPad and Android tablets. The participants were diverse: 15 (58 %) African Americans, seven (27 %) Whites, two (8 %) Asians, two (8 %) Latinos with either diabetes, depression, or who were caregivers. Participants were given condition-specific tasks, such as entering a blood glucose value into a diabetes app. Participant interviews were video recorded and were coded using standard methods to evaluate attempts and completions of tasks. We performed inductive coding of participant comments to identify emergent themes. Participants completed 79 of 185 (43 %) tasks across 11 apps without assistance. Three themes emerged from participant comments: lack of confidence with technology, frustration with design features and navigation, and interest in having technology to support their self-management. App developers should employ participatory design strategies in order to have an impact on chronic conditions such as diabetes and depression that disproportionately affect vulnerable populations. While patients

Usability Testing Of Web Mapping Portals

Directory of Open Access Journals (Sweden)

Petr Voldán

2011-05-01

Full Text Available This study presents a usability testing as method, which can be used to improve controlling of web map sites. Study refers to the basic principles of this method and describes particular usability tests of mapping sites. In this paper are identified potential usability problems of web sites: Amapy.cz, Google maps and Mapy.cz. The usability testing was focused on problems related with user interfaces, addresses searching and route planning of the map sites.

Solidification and casting

CERN Document Server

Cantor, Brian

2002-01-01

INDUSTRIAL PERSPECTIVEDirect chillcasting of aluminium alloysContinuous casting of aluminium alloysContinuous casting of steelsCastings in the automotive industryCast aluminium-silicon piston alloysMODELLING AND SIMULATIONModelling direct chill castingMold filling simulation of die castingThe ten casting rulesGrain selection in single crystal superalloy castingsDefects in aluminium shape castingPattern formation during solidificationPeritectic solidificationSTRUCTURE AND DEFECTSHetergeneous nucleation in aluminium alloysCo

The usability issues of faceted navigation in digital libraries

Directory of Open Access Journals (Sweden)

Eliane Blumer

2014-05-01

For more than five years, the project ACCEPT, a subproject of a Swiss national project called e-lib.ch, analyzes the usability and usefulness of digital libraries, by using user oriented methods. Experience has shown that filters provided through faceted navigation are considered as positive and very useful by end users. Nevertheless, based on different test results, several returning mistakes have been detected and it turns out that there are some ‘unwritten standards’ concerning e.g. position, labelling or ranking which should be respected to fulfil the aim of a good usability which users do expect of such web services. In this poster we will first give an introduction to faceted navigation, actual design issues and their use in digital libraries and then present testing methods, which can be easily applied in a digital library context. Together with a list of best practices concerning faceted navigation drawn out of different test experiences, the paper should give the reader all important information to evaluate its current faceted navigation and see where improvements could be made.

Software Development and Feedback from Usability Evaluations

DEFF Research Database (Denmark)

Høegh, Rune Thaarup

2008-01-01

This paper presents a study of the strengths and weaknesses of written, multimedia and oral feedback from usability evaluations to developers. The strengths and weaknesses are related to how well the feedback supports the developers in addressing usability problems in a software system. The study...... concludes that using the traditional written usability report, as the only form of feedback from usability evaluations is associated with problems related to the report not supporting the process of addressing the usability problems. The report is criticized for representing an overwhelming amount...... of information, while still not offering the required information to address usability problems. Other forms of feedback, such as oral or multimedia feedback helps the developer in understanding the usability problems better, but are on the other hand less cost-effective than a written description....

The Evaluator Effect in Usability Tests

DEFF Research Database (Denmark)

Jacobsen, Niels Ebbe; Hertzum, Morten; John, Bonnie E.

1998-01-01

Usability tests are applied in industry to evaluate systems and in research as a yardstick for other usability evaluation methods. However, one potential threat to the reliability of usability tests has been left unaddressed: the evaluator effect. In this study, four evaluators analyzed four vide...

Bainite obtaining in cast iron with carbides castings

Directory of Open Access Journals (Sweden)

S. Pietrowski

2010-01-01

Full Text Available In these paper the possibility of upper and lower bainite obtaining in cast iron with carbides castings are presented. Conditions, when in cast iron with carbides castings during continuous free air cooling austenite transformation to upper bainite or its mixture with lower bainte proceeds, have been given. A mechanism of this transformation has been given, Si, Ni, Mn and Mo distribution in the eutectic cell has been tested and hardness of tested castings has been determined.

Melting and casting of FeAl-based cast alloy

Energy Technology Data Exchange (ETDEWEB)

Sikka, V.K. [Oak Ridge National Lab., TN (United States); Wilkening, D. [Columbia Falls Aluminum Co., Columbia Falls, MT (United States); Liebetrau, J.; Mackey, B. [AFFCO, L.L.C., Anaconda, MT (United States)

1998-11-01

The FeAl-based intermetallic alloys are of great interest because of their low density, low raw material cost, and excellent resistance to high-temperature oxidation, sulfidation, carburization, and molten salts. The applications based on these unique properties of FeAl require methods to melt and cast these alloys into complex-shaped castings and centrifugal cast tubes. This paper addresses the melting-related issues and the effect of chemistry on the microstructure and hardness of castings. It is concluded that the use of the Exo-Melt{trademark} process for melting and the proper selection of the aluminum melt stock can result in porosity-free castings. The FeAl alloys can be melted and cast from the virgin and revert stock. A large variation in carbon content of the alloys is possible before the precipitation of graphite flakes occurs. Titanium is a very potent addition to refine the grain size of castings. A range of complex sand castings and two different sizes of centrifugal cast tubes of the alloy have already been cast.

Developer Driven and User Driven Usability Evaluations

DEFF Research Database (Denmark)

Bruun, Anders

2013-01-01

Usability evaluation provide software development teams with insights on the degree to which a software application enables a user to achieve his/her goals, how fast these goals can be achieved, how easy it is to learn and how satisfactory it is in use Although usability evaluations are crucial...... in the process of developing software systems with a high level of usability, its use is still limited in the context of small software development companies. Several approaches have been proposed to support software development practitioners (SWPs) in conducting usability evaluations, and my thesis explores two...... of these: 1) The first approach is to support SWPs by training them to drive usability evaluations. 2) The second approach to support SWPs involves minimalist training of end users to drive usability evaluations. In related work, a set of five quality criteria for usability evaluations is applied...

Value/impact of design criteria for cast ductile iron shipping casks

International Nuclear Information System (INIS)

1983-01-01

The ductile failure criteria proposed in the Base report appear appropriate except that stress intensity values, S/sub m/ should be based on lower safety factors and ductility should be added as a criterion. A safety factor for stress intensity, s/sub m/ of 4 is recommended rather than 3 on minimum ultimate tensile strength, S/sub u/ in accordance with ASME code philosophy of assigning higher safety factors to cast ductile iron than to steel. This more conservative approach has no impact on costs since the selection of wall thickness is controlled by shielding rather than by stress considerations. The addition of a ductility criterion is recommended because of the problems associated with the selection of appropriate brittle failure criteria and the potential for cast ductile iron to have extremely low elongation at failure. Neither a materials nor a linear elastic fracture mechanics (LEFM) approach appear to be viable for demonstrating the prevention of brittle failure in cast ductile iron shipping casks. It is possible that the analytic methods predict brittle failure because of extremely conservative assumptions whereas real casks may not fail. Model drop tests could be used to demonstrate containment integrity. It is estimated that a risk committment of at least $1,000,000 would be required for engineering, design, model fabrication and testing. Before taking such risks, a mechanism should be found to obtain concurrence from NRC that the results of the test would be acceptable. Probabilistic approaches or model testing could be used to demonstrate the acceptability of cast ductile iron casks from a brittle failure point of view. Before probabilistic methods can be used, the NRC would have to be persuaded to accept the approach of the Competent Authority in West Germany or more formalized methods for probabilistic risk assessments

Usability of EFBs for Viewing NOTAMs and AIS/MET Data Link Messages

Science.gov (United States)

Evans, Emory T.; Young, Steven D.; Daniels, Tammi S.; Myer, Robert R.

2014-01-01

Electronic Flight Bags (EFB) are increasingly integral to flight deck information management. A piloted simulation study was conducted at NASA Langley Research Center, one aspect of which was to evaluate the usability and acceptability of EFBs for viewing and managing Notices to Airmen (NOTAMs) and data linked aeronautical information services (AIS) and meteorological information (MET). The study simulated approaches and landings at Memphis International Airport (KMEM) using various flight scenarios and weather conditions. Ten two-pilot commercial airline crews participated, utilizing the Cockpit Motion Facility's Research Flight Deck (CMF/RFD) simulator. Each crew completed approximately two dozen flights over a two day period. Two EFBs were installed, one for each pilot. Study data were collected in the form of questionnaire/interview responses, audio/video recordings, oculometer recordings, and aircraft/system state data. Preliminary usability results are reported primarily based on pilot interviews and responses to questions focused on ease of learning, ease of use, usefulness, satisfaction, and acceptability. Analysis of the data from the other objective measures (e.g., oculometer) is ongoing and will be reported in a future publication. This paper covers how the EFB functionality was set up for the study; the NOTAM, AIS/MET data link, and weather messages that were presented; questionnaire results; selected pilot observations; and conclusions.

Physician satisfaction with a critical care clinical information system using a multimethod evaluation of usability.

Science.gov (United States)

Hudson, Darren; Kushniruk, Andre; Borycki, Elizabeth; Zuege, Danny J

2018-04-01

Physician satisfaction with electronic medical records has often been poor. Usability has frequently been identified as a source for decreased satisfaction. While surveys can identify many issues, and are logistically easier to administer, they may miss issues identified using other methods This study sought to understand the level of physician satisfaction and usability issues associated with a critical care clinical information system (eCritical Alberta) implemented throughout the province of Alberta, Canada. All critical care attending physicians using the system were invited to participate in an online survey. Questions included components of the User Acceptance of Information Technology and Usability Questionnaire as well as free text feedback on system components. Physicians were also invited to participate in a think aloud test using simulated scenarios. The transcribed think aloud text and questionnaire were subjected to textual analysis. 82% of all eligible physicians completed the on-line survey (n = 61). Eight physicians were invited and seven completed the think aloud test. Overall satisfaction with the system was moderate. Usability was identified as a significant factor contributing to satisfaction. The major usability factors identified were system response time and layout. The think aloud component identified additional factors beyond those identified in the on-line survey. This study found a modestly high level of physician satisfaction with a province-wide clinical critical care information system. Usability continues to be a significant factor in physician satisfaction. Using multiple methods of evaluation can capture the benefits of a large sample size and deeper understanding of the issues. Copyright © 2018 Elsevier B.V. All rights reserved.

A Cross-Cultural Study of How Usability Professionals Experience the Usability of Everyday Systems

DEFF Research Database (Denmark)

Jiang, Y.; Sun, X.; Li, H.

2009-01-01

in the study, their understanding of fun systems differs across cultural backgrounds. Also, easy-to-use and useful systems are perceived as being similar or different depending on the usability professional’s cultural background. Most other cross-cultural differences relate to categories of construct......Culture influences many aspects of the design and use of computer systems; understanding better this influence on their own thinking may benefit usability professionals who do cross-cultural usability work. Using Kelly’s notion of personal constructs, we focus on one mediator of culture: how...

Usable security history, themes, and challenges

CERN Document Server

Garfinkel, Simson

2014-01-01

There has been roughly 15 years of research into approaches for aligning research in Human Computer Interaction with computer Security, more colloquially known as ``usable security.'' Although usability and security were once thought to be inherently antagonistic, today there is wide consensus that systems that are not usable will inevitably suffer security failures when they are deployed into the real world. Only by simultaneously addressing both usability and security concerns will we be able to build systems that are truly secure. This book presents the historical context of the work to dat

An Intelligent Framework for Website Usability

Directory of Open Access Journals (Sweden)

Alexiei Dingli

2014-01-01

Full Text Available With the major advances of the Internet throughout the past couple of years, websites have come to play a central role in the modern marketing business program. However, simply owning a website is not enough for a business to prosper on the Web. Indeed, it is the level of usability of a website that determines if a user stays or abandons it for another competing one. It is therefore crucial to understand the importance of usability on the web, and consequently the need for its evaluation. Nonetheless, there exist a number of obstacles preventing software organizations from successfully applying sound website usability evaluation strategies in practice. From this point of view automation of the latter is extremely beneficial, which not only assists designers in creating more usable websites, but also enhances the Internet users’ experience on the Web and increases their level of satisfaction. As a means of addressing this problem, an Intelligent Usability Evaluation (IUE tool is proposed that automates the usability evaluation process by employing a Heuristic Evaluation technique in an intelligent manner through the adoption of several research-based AI methods. Experimental results show there exists a high correlation between the tool and human annotators when identifying the considered usability violations.

Managing Product Usability: How companies deal with usability in the development of electronic consumer products

OpenAIRE

Van Kuijk, J.I.

2010-01-01

Problem statement: Even though there is a large amount of methods for user-centred design, the usability of electronic consumer products (e.g., portable music players, washing machines and mobile phones) is under pressure. Usability is the extent to which a product can be used by specified users to achieve specified goals with effectiveness, efficiency and satisfaction in a specified context of use. That the usability of electronic consumer products is under pressure is attributed to an incre...

Usability of Public Administration Electronic Forms

Directory of Open Access Journals (Sweden)

Miloslav Hub

2015-06-01

Full Text Available This paper is focused on the testing and evaluating of public administration electronic forms from the usability point of view. Its objective is to design a suitable methodology for usability testing of electronic forms and their description and distribution to public administration information systems professionals. Firstly, methods of usability engineering are summarized and a suitable method for usability testing and evaluation of electronic forms is selected. Farther, the methodology of electronic forms usability testing that uses the selected method is suggested. In the last part of the paper the case study that uses the proposed methodology is suggested and performed. The main benefit of the work is the design of testing methodology and proposition of the set of recommendations for new public administration electronic forms design.

Problem Prioritization in Usability Evaluation:

DEFF Research Database (Denmark)

Hertzum, Morten

2006-01-01

Severity assessments enable prioritization of problems encountered during usability evaluations and thereby provide a device for guiding the utilization of design resources. However, designers' response to usability evaluations is also influenced by other factors, which may overshadow severity....... With the purpose of enhancing the impact of severity assessments, this study combines a field study of factors that influence the impact of evaluations with an experimental study of severity assessments made during usability inspections. The results show that even in a project receptive to input from evaluations...... their impact was highly dependent on conducting evaluations early. This accorded with an informal method that blended elements of usability evaluation and participatory design and could be extended with user-made severity assessments. The major cost associated with the evaluations was not finding but fixing...

Neuroanatomical correlates of perceived usability

DEFF Research Database (Denmark)

Vi, Chi Thanh; Hornbæk, Kasper; Subramanian, Sriram

2017-01-01

Usability has a distinct subjective component, yet surprisingly little is known about its neural basis and relation to the neuroanatomy of aesthetics. To begin closing this gap, we conducted two functional magnetic resonance imaging studies in which participants were shown static webpages (in...... the first study) and videos of interaction with webpages (in the second study). The webpages were controlled so as to exhibit high and low levels of perceived usability and perceived aesthetics. Our results show unique links between perceived usability and brain areas involved in functions such as emotional...... processing (left fusiform gyrus, superior frontal gyrus), anticipation of physical interaction (precentral gyrus), task intention (anterior cingulate cortex), and linguistic processing (medial and bilateral superior frontal gyri). We use these findings to discuss the brain correlates of perceived usability...

Usability evaluation of healthcare information systems: comparison of methods and classification of usability problems

NARCIS (Netherlands)

Khajouei, R.

2011-01-01

In ziekenhuizen wordt steeds meer gebruik gemaakt van informatiesystemen, maar de usability laat vaak te wensen over. Reza Khajouei testte twee methodes om de usability te beoordelen. Hij constateert dat beide methoden ongeveer evenveel, maar verschillende problemen aan het licht brengen. Uit een

Supporting Usability Engineering in Small Software Development Organizations

DEFF Research Database (Denmark)

Bornoe, Nis; Stage, Jan

2013-01-01

Despite an interest and use of different usability engineering methods small software development organizations find it challenging to implement usability engineering into the software development process. We present the results from a study about usability engineering in practice. Through a series...... of semistructured interviews we want to get an understanding of how usability is implemented into the organizations and how it’s practiced in reality. We found that the developers found it problematic to combine agile software development methods with classic usability engineering methods. A lack of solid usability...... engineering expertise and not least experience seems to be a main obstacle for a successful implementation of usability engineering into current software development practices. They are requesting methods and procedures that fit better with their current practices and strategies to implement usability...

Advancing Usability Evaluation through Human Reliability Analysis

International Nuclear Information System (INIS)

Ronald L. Boring; David I. Gertman

2005-01-01

This paper introduces a novel augmentation to the current heuristic usability evaluation methodology. The SPAR-H human reliability analysis method was developed for categorizing human performance in nuclear power plants. Despite the specialized use of SPAR-H for safety critical scenarios, the method also holds promise for use in commercial off-the-shelf software usability evaluations. The SPAR-H method shares task analysis underpinnings with human-computer interaction, and it can be easily adapted to incorporate usability heuristics as performance shaping factors. By assigning probabilistic modifiers to heuristics, it is possible to arrive at the usability error probability (UEP). This UEP is not a literal probability of error but nonetheless provides a quantitative basis to heuristic evaluation. When combined with a consequence matrix for usability errors, this method affords ready prioritization of usability issues

Implementation of Cyber-Physical Production Systems for Quality Prediction and Operation Control in Metal Casting.

Science.gov (United States)

Lee, JuneHyuck; Noh, Sang Do; Kim, Hyun-Jung; Kang, Yong-Shin

2018-05-04

The prediction of internal defects of metal casting immediately after the casting process saves unnecessary time and money by reducing the amount of inputs into the next stage, such as the machining process, and enables flexible scheduling. Cyber-physical production systems (CPPS) perfectly fulfill the aforementioned requirements. This study deals with the implementation of CPPS in a real factory to predict the quality of metal casting and operation control. First, a CPPS architecture framework for quality prediction and operation control in metal-casting production was designed. The framework describes collaboration among internet of things (IoT), artificial intelligence, simulations, manufacturing execution systems, and advanced planning and scheduling systems. Subsequently, the implementation of the CPPS in actual plants is described. Temperature is a major factor that affects casting quality, and thus, temperature sensors and IoT communication devices were attached to casting machines. The well-known NoSQL database, HBase and the high-speed processing/analysis tool, Spark, are used for IoT repository and data pre-processing, respectively. Many machine learning algorithms such as decision tree, random forest, artificial neural network, and support vector machine were used for quality prediction and compared with R software. Finally, the operation of the entire system is demonstrated through a CPPS dashboard. In an era in which most CPPS-related studies are conducted on high-level abstract models, this study describes more specific architectural frameworks, use cases, usable software, and analytical methodologies. In addition, this study verifies the usefulness of CPPS by estimating quantitative effects. This is expected to contribute to the proliferation of CPPS in the industry.

Implementation of Cyber-Physical Production Systems for Quality Prediction and Operation Control in Metal Casting

Directory of Open Access Journals (Sweden)

JuneHyuck Lee

2018-05-01

Full Text Available The prediction of internal defects of metal casting immediately after the casting process saves unnecessary time and money by reducing the amount of inputs into the next stage, such as the machining process, and enables flexible scheduling. Cyber-physical production systems (CPPS perfectly fulfill the aforementioned requirements. This study deals with the implementation of CPPS in a real factory to predict the quality of metal casting and operation control. First, a CPPS architecture framework for quality prediction and operation control in metal-casting production was designed. The framework describes collaboration among internet of things (IoT, artificial intelligence, simulations, manufacturing execution systems, and advanced planning and scheduling systems. Subsequently, the implementation of the CPPS in actual plants is described. Temperature is a major factor that affects casting quality, and thus, temperature sensors and IoT communication devices were attached to casting machines. The well-known NoSQL database, HBase and the high-speed processing/analysis tool, Spark, are used for IoT repository and data pre-processing, respectively. Many machine learning algorithms such as decision tree, random forest, artificial neural network, and support vector machine were used for quality prediction and compared with R software. Finally, the operation of the entire system is demonstrated through a CPPS dashboard. In an era in which most CPPS-related studies are conducted on high-level abstract models, this study describes more specific architectural frameworks, use cases, usable software, and analytical methodologies. In addition, this study verifies the usefulness of CPPS by estimating quantitative effects. This is expected to contribute to the proliferation of CPPS in the industry.

Implementation of Cyber-Physical Production Systems for Quality Prediction and Operation Control in Metal Casting

Science.gov (United States)

Lee, JuneHyuck; Noh, Sang Do; Kim, Hyun-Jung; Kang, Yong-Shin

2018-01-01

The prediction of internal defects of metal casting immediately after the casting process saves unnecessary time and money by reducing the amount of inputs into the next stage, such as the machining process, and enables flexible scheduling. Cyber-physical production systems (CPPS) perfectly fulfill the aforementioned requirements. This study deals with the implementation of CPPS in a real factory to predict the quality of metal casting and operation control. First, a CPPS architecture framework for quality prediction and operation control in metal-casting production was designed. The framework describes collaboration among internet of things (IoT), artificial intelligence, simulations, manufacturing execution systems, and advanced planning and scheduling systems. Subsequently, the implementation of the CPPS in actual plants is described. Temperature is a major factor that affects casting quality, and thus, temperature sensors and IoT communication devices were attached to casting machines. The well-known NoSQL database, HBase and the high-speed processing/analysis tool, Spark, are used for IoT repository and data pre-processing, respectively. Many machine learning algorithms such as decision tree, random forest, artificial neural network, and support vector machine were used for quality prediction and compared with R software. Finally, the operation of the entire system is demonstrated through a CPPS dashboard. In an era in which most CPPS-related studies are conducted on high-level abstract models, this study describes more specific architectural frameworks, use cases, usable software, and analytical methodologies. In addition, this study verifies the usefulness of CPPS by estimating quantitative effects. This is expected to contribute to the proliferation of CPPS in the industry. PMID:29734699

Evaluation and Satisfaction Survey on the Interface Usability of Online Publishing Software

Directory of Open Access Journals (Sweden)

Ying-Jye Lee

2014-01-01

Full Text Available Digital publishing is one of the national key programs. Different from traditional digital publishing models, consumers could create personal digital publications with the editing program provided by businesses and combine it with web-to-print to output solid publications. Nevertheless, the usability of online publishing software is related to consumers’ acceptance or intention of product purchase. In this case, Focus Group is utilized to screen representative online publishing software (including TinTint, Photobook, and Hypo for evaluating interface usability, investigating users’ Subjective Satisfaction, and further proposing suggestions for interface modification. Learnability and the number of user errors are set as the evaluation indicators of usability. Within the evaluation indicators in Learnability, the results show that nine typical tasks, except for Storing, show significant difference between various online publishing software. Typical tasks of basic information of works, appending pictures, adjusting pictures, changing type version, and changing pages in the number of user errors reveal significant difference on distinct online publishing software. Regarding the evaluation of overall Subjective Satisfaction with interface, TinTint and Hypo outperform Photobook, and no significant difference appears between TinTint and Hypo. It is expected that the research model could be the application reference of interface development and evaluation in digital content industries.

Usability, acceptability, and adherence to an electronic self-monitoring system in patients with major depression discharged from inpatient wards

DEFF Research Database (Denmark)

Lauritsen, Lise; Andersen, Louise; Olsson, Emilia

2017-01-01

Background: Patients suffering from depression have a high risk of relapse and readmission in the weeks following discharge from inpatient wards. Electronic self-monitoring systems that offer patient-communication features are now available to offer daily support to patients, but the usability, a...

Combining usability evaluations to highlight the chain that leads from usability flaws to usage problems and then negative outcomes.

Science.gov (United States)

Watbled, Ludivine; Marcilly, Romaric; Guerlinger, Sandra; Bastien, J-M Christian; Beuscart-Zéphir, Marie-Catherine; Beuscart, Régis

2018-02-01

Poor usability of health technology is thought to diminish work system performance, increase error rates and, potentially, harm patients. The present study (i) used a combination of usability evaluation methods to highlight the chain that leads from usability flaws to usage problems experienced by users and, ultimately, to negative patient outcomes, and (ii) validated this approach by studying two different discharge summary production systems. To comply with quality guidelines, the process of drafting and sending discharge summaries is increasingly being automated. However, the usability of these systems may modify their impact (or the absence thereof) in terms of production times and quality, and must therefore be evaluated. Here, we applied three successive techniques for usability evaluation (heuristic evaluation, user testing and field observation) to two discharge summary production systems (underpinned by different technologies). The systems' main usability flaws led respectively to an increase in the time need to produce a discharge summary and the risk of patient misidentification. Our results are discussed with regard to the possibility of linking the usability flaws, usage problems and the negative outcomes by successively applying three methods for evaluating usability (heuristic evaluation, user testing and in situ observations) throughout the system development life cycle. Copyright © 2018 Elsevier Inc. All rights reserved.

Evaluation of the new TAMZ titanium alloy for dental cast application.

Science.gov (United States)

Zhang, Y M; Guo, T W; Li, Z C

2000-12-01

To reveal the potential of the new titanium alloy as dental prosthodontic materials. Dental castings of TAMZ alloy were investigated in the casting machine specially designed for titanium. A mesh pattern was used to count the castability value. The mechanical properties were measured by means of a universal testing machine. Optical micrography was done on the exposed cross-section of TAMZ alloy casting. From the surface to the inner part the Knoop hardness in reacted layer of TAMZ alloy casting was measured. The structure and elemental analyses of the reacted layer were made by SEM and element line scanning observation. The castability value (Cv = 98%) and the tensile test (sigma b = 850 Mpa, sigma 0.2 = 575 Mpa, delta = 7.33%) data were collected. The castings microstructure showed main alpha phase and small beta phase. Knoop hardness in the surface reacted layer was greater than that in the inner part. From the SEM and element line scanning observation, there are three different layers in the surface reacted layer of the TAMZ alloy castings, and higher level of element of O, Al, Si and Zr were found in the reacted layer while the Si permeated deeper than others. TAMZ alloy can be accepted as a material for dental alloy in prosthodontics.

Health Information Technology Usability Evaluation Scale (Health-ITUES) for Usability Assessment of Mobile Health Technology: Validation Study.

Science.gov (United States)

Schnall, Rebecca; Cho, Hwayoung; Liu, Jianfang

2018-01-05

Mobile technology has become a ubiquitous technology and can be particularly useful in the delivery of health interventions. This technology can allow us to deliver interventions to scale, cover broad geographic areas, and deliver technologies in highly tailored ways based on the preferences or characteristics of users. The broad use of mobile technologies supports the need for usability assessments of these tools. Although there have been a number of usability assessment instruments developed, none have been validated for use with mobile technologies. The goal of this work was to validate the Health Information Technology Usability Evaluation Scale (Health-ITUES), a customizable usability assessment instrument in a sample of community-dwelling adults who were testing the use of a new mobile health (mHealth) technology. A sample of 92 community-dwelling adults living with HIV used a new mobile app for symptom self-management and completed the Health-ITUES to assess the usability of the app. They also completed the Post-Study System Usability Questionnaire (PSSUQ), a widely used and well-validated usability assessment tool. Correlations between these scales and each of the subscales were assessed. The subscales of the Health-ITUES showed high internal consistency reliability (Cronbach alpha=.85-.92). Each of the Health-ITUES subscales and the overall scale was moderately to strongly correlated with the PSSUQ scales (r=.46-.70), demonstrating the criterion validity of the Health-ITUES. The Health-ITUES has demonstrated reliability and validity for use in assessing the usability of mHealth technologies in community-dwelling adults living with a chronic illness. ©Rebecca Schnall, Hwayoung Cho, Jianfang Liu. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 05.01.2018.

Fibreglass Total Contact Casting, Removable Cast Walkers, and Irremovable Cast Walkers to Treat Diabetic Neuropathic Foot Ulcers: A Health Technology Assessment

Science.gov (United States)

Costa, Vania; Tu, Hong Anh; Wells, David; Weir, Mark; Holubowich, Corinne; Walter, Melissa

2017-01-01

Background Diabetic neuropathic foot ulcers are a risk factor for lower leg amputation. Many experts recommend offloading with fibreglass total contact casting, removable cast walkers, and irremovable cast walkers as a way to treat these ulcers. Methods We completed a health technology assessment, which included an evaluation of clinical benefits and harms, value for money, and patient preferences for offloading devices. We performed a systematic literature search on August 17, 2016, to identify randomized controlled trials that compared fibreglass total contact casting, removable cast walkers, and irremovable cast walkers with other treatments (offloading or non-offloading) in patients with diabetic neuropathic foot ulcers. We developed a decision-analytic model to assess the cost-effectiveness of fibreglass total contact casting, removable cast walkers, and irremovable cast walkers, and we conducted a 5-year budget impact analysis. Finally, we interviewed people with diabetes who had lived experience with foot ulcers, asking them about the different offloading devices and the factors that influenced their treatment choices. Results We identified 13 randomized controlled trials. The evidence suggests that total contact casting, removable cast walkers, and irremovable cast walkers are beneficial in the treatment of neuropathic, noninfected foot ulcers in patients with diabetes but without severe peripheral arterial disease. Compared to removable cast walkers, ulcer healing was improved with total contact casting (moderate quality evidence; risk difference 0.17 [95% confidence interval 0.00–0.33]) and irremovable cast walkers (low quality evidence; risk difference 0.21 [95% confidence interval 0.01–0.40]). We found no difference in ulcer healing between total contact casting and irremovable cast walkers (low quality evidence; risk difference 0.02 [95% confidence interval −0.11–0.14]). The economic analysis showed that total contact casting and irremovable

Usability and Interaction Design in West Africa

DEFF Research Database (Denmark)

Sørensen, Jannick Kirk

Good usability is important in all ICT solutions. To achieve good usability, a good praxis for interaction design is needed. Usability and interaction design have however emerged and established itself in a North European and US context. The ICT industry in Africa do not have the same resources...... for user-involvement and participatory design be directly transferred? How can interaction design and usability be cared for in African ICT development context, given the resources available? This paper aims to initiate a discussion of the conditions for interaction design and usability in West Africa...... in the field of interaction design as in the developed world. While good usability and good user experiences are important to all users of ICT, the question is whether the methods and techniques that were mainly developed in Scandinavia, Europe and US are suitable for ICT development in Africa? Can ideals...

Qualitative Marketing Research Through Usability Testing

Directory of Open Access Journals (Sweden)

Orzan Mihai

2008-04-01

Full Text Available Usability is an attribute of any good product, just as its functionality. It refers mainly to the utility of a product for its indented users, as well as to its ease of use. And whilst a correct functionality is critical for the commercial success of any product, its value comes through the human needs that it fulfills, which is determined through various marketing research techniques. In parallel, the IT&C community has developed in the last two decades its own type of research, called usability testing, used mainly to evaluate interface ease of use and all usability problems associated with.software products. This article aims at finding the right place for usability testing and usability professionals in the marketing community, as well as drawing a wider picture, from a marketing research perspective, on one of the most popular topics in IT&C community for the benefit of marketing scholars and professionals.

Understanding Usability Work as a Human Activity

DEFF Research Database (Denmark)

Nørgaard, Mie

Three core themes are explored in eight papers: Usability work as a human activity, usability practice and methods, and persuasiveness of evaluation results and feedback. We explore how usability work is much more than methods and work procedures, and argue that maturing our understanding...

Course management systems from a usability perspective

CSIR Research Space (South Africa)

Padayachee, I

2011-01-01

Full Text Available (with knowledge of usability engineering and system domain knowledge) who inspect the Indira Padayachee, Paula Kotz? and Alta van der Merwe 302 interface and determine its compliance with recognized usability principles (the ?heuristics... presents a summary of the results of the severity rating. Table 2: Severity Rating Scale for Usability Problems (Nielsen 2007b) 0 I don?t agree that this is a usability problem at all 1 Cosmetic problem only: need not be fixed unless there is extra...

Usability Problems in a Home Telemedicine System

DEFF Research Database (Denmark)

Bruun, Anders; Stage, Jan

2010-01-01

a high level of usability in order to enable their users to employ the required functionality, especially if the target user group is elderly people. This paper reports from a usability evaluation of a home telemedicine system. Five elderly persons carried out specified tasks with the system, and based...... on that we identified usability problems with the system. The problems are presented, analysed in relation to 12 different usability themes and related to results from other evaluations of similar systems....

Videoconferencing for site initiations in clinical studies: Mixed methods evaluation of usability, acceptability, and impact on recruitment.

Science.gov (United States)

Randell, Rebecca; Backhouse, Michael R; Nelson, E Andrea

2016-12-01

A critical issue for multicentre clinical studies is conducting site initiations, ensuring sites are trained in study procedures and comply with relevant governance requirements before they begin recruiting patients. How technology can support site initiations has not previously been explored. This study sought to evaluate use of off-the-shelf web-based videoconferencing to deliver site initiations for a large national multicentre study. Participants in the initiations, including podiatrists, diabetologists, trial coordinators, and research nurses, completed an online questionnaire based on the System Usability Scale (SUS) (N = 15). This was followed by semi-structured interviews, with a consultant diabetologist, a trial coordinator, and three research nurses, exploring perceived benefits and limitations of videoconferencing. The mean SUS score for the videoconferencing platform was 87.2 (SD = 13.7), suggesting a good level of usability. Interview participants perceived initiations delivered by videoconferencing as being more interactive and easier to follow than those delivered by teleconference. In comparison to face-to-face initiations, videoconferencing takes less time, easily fitting in with the work of staff at the local sites. Perceptions of impact on communication varied according to the hardware used. Off-the-shelf videoconferencing is a viable alternative to face-to-face site initiations and confers advantages over teleconferencing.

Software architecture analysis of usability

NARCIS (Netherlands)

Folmer, E; van Gurp, J; Bosch, J; Bastide, R; Palanque, P; Roth, J

2005-01-01

Studies of software engineering projects show that a large number of usability related change requests are made after its deployment. Fixing usability problems during the later stages of development often proves to be costly, since many of the necessary changes require changes to the system that

Increasing the impact of usability work in software development

DEFF Research Database (Denmark)

Uldall-Espersen, Tobias; Frøkjær, Erik

2006-01-01

Usability, Case Study, Software Engineering, Software Quality, Organizational Impact, Usability Requirement Management, CHI 2007 workshop......Usability, Case Study, Software Engineering, Software Quality, Organizational Impact, Usability Requirement Management, CHI 2007 workshop...

Towards Evidence Based Usability in Health Informatics?

NARCIS (Netherlands)

Marcilly, Romaric; Peute, Linda W.; Beuscart-Zephir, Marie-Catherine; Jaspers, Monique W.

2015-01-01

In a Health Information Technology (HIT) regulatory context in which the usability of this technology is more and more a critical issue, there is an increasing need for evidence based usability practice. However, a clear definition of evidence based usability practice and how to achieve it is still

Usability and User Experience Information in Reviews

DEFF Research Database (Denmark)

Hedegaard, Steffen

future versions of the prod- uct? The results show that users write about product use in terms related to standard and popularly researched aspects of usability and user experience, e.g. effiiency, effectiveness, enjoyment, frustration. The frequency with which different aspects are depicted in reviews...... differs significantly between product domains. We also find that reviews contain descriptions of more persistent usability issues. I devise automatic methods for classifying sentences with regard to dimensions of both usability and user experience and usability problems and perform a linguistic analysis...

Usability Evaluation in a Digitally Emerging Country

DEFF Research Database (Denmark)

Lizano, Fulvio; Sandoval, Maria Marta; Bruun, Anders

2013-01-01

Several emerging countries experience increasing software development activities. With the purpose of provide useful feedback on possible courses of action for increasing application of usability evaluation in such countries, this paper explores the status of usability evaluation in a digitally...... emerging country. Our aim is to identifying common characteristics or behavioral patterns that could be compared with digitally advanced countries. We used an online survey answered by 26 software development organizations, which gave a snapshot of the application of usability evaluation...... in these organizations. We found many similarities with advanced countries, several completely new obstacles more connected with software development matters and a relatively positive improvement in the lack of “usability culture”. These findings suggest good conditions to improve conduction of usability evaluations...

Web usability evaluation on BloobIS website by using hallway usability testing method and ISO 9241:11

Science.gov (United States)

Dwi Susanto, Tony; Ingesti Prasetyo, Anisa; Astuti, Hanim Maria

2018-03-01

At this moment, the need for web as an information media is highly important. Not only confined in the infotainment area, government, and education, but health as well uses the web media as a medium for providing information effectively. BloobIS is a web based application which integrates blood supply and distribution information at the Blood Transfusion Unit. Knowing how easy information is on BloobIS is marked by how convenient the website is used. Up until now, the BloobIS website is nearing completion but testing has not yet been performed to users and is on the testing and development phase in the Development Life Cycle software. Thus, an evaluation namely the quality control software which focuses on the perspective of BloobIs web usability is required. Hallway Usability Testing and ISO 9241:11 are the methods chosen to measure the BloobIS application usability. The expected outputs of the quality control software focusing on the usability evaluation are being able to rectify the usability deficiencies on the BloobIs web and provide recommendations to develop the web as a basic BloobIS web quality upgraed which sets a goal to amplify the satisfaction of web users based on usability factors in ISO 9241:11.

The casting of western sculpture during the XIXth century: sand casting versus lost wax casting

NARCIS (Netherlands)

Beentjes, T.P.C.

2014-01-01

This paper will discuss research into bronze casting techniques as practiced during the XIXth and early XXth century. Both natural sand casting (fonte au sable naturel) and lost wax casting (fonte à la cire perdue) were employed during this period and sometimes rivalled for commissions. Before the

Log files for testing usability

NARCIS (Netherlands)

Klein Teeselink, G.; Siepe, A.H.M.; Pijper, de J.R.

1999-01-01

The aim of this study is to gain insight in the usefulness of log file analysis as a method to evaluate the usability of individual interface components and their influence on the usability of the overall user interface. We selected a music player as application, with four different interfaces and

User-centered design and usability testing of an innovative health-related quality of life module.

Science.gov (United States)

Nagykaldi, Z J; Jordan, M; Quitoriano, J; Ciro, C A; Mold, J W

2014-01-01

Various computerized health risk appraisals (HRAs) are available, but few of them assess health-related quality of life (HRQoL) in a goal-directed framework. This study describes the user-centered development and usability testing of an innovative HRQoL module that extends a validated HRA tool in primary care settings. Systematic user-centered design, usability testing, and qualitative methods were used to develop the HRQoL module in primary care practices. Twenty two patients and 5 clinicians participated in two rounds of interactive technology think-out-loud sessions (TOLs) and semi-structured interviews (SSIs) to iteratively develop a four-step, computerized process that collects information on patient goals for meaningful life activities and current level of disability and presents a personalized and prioritized list of preventive recommendations linked to online resources. Analysis of TOLs and SSIs generated 5 categories and 11 sub-categories related to facilitators and barriers to usability and human-technology interaction. The categories included: Understanding the Purpose, Usability, Perceived Value, Literacy, and Participant Motivation. Some categories were inter-connected. The technology was continually and iteratively improved between sessions until saturation of positive feedback was achieved in 4 categories (addressing motivation will require more research). Usability of all screen units of the module was improved substantially. Clinician feedback emphasized the importance of the module's ability to translate the patient-centered HRQoL Report into actionable items for clinicians to facilitate shared decision-making. Complete integration of the HRQoL module into the existing HRA will require further development and testing. Systematic application of user-centered design and human factors principles in technology development and testing may significantly improve the usability and clinical value of health information systems. This more sophisticated

Managing Product Usability : How companies deal with usability in the development of electronic consumer products

NARCIS (Netherlands)

Van Kuijk, J.I.

2010-01-01

Problem statement: Even though there is a large amount of methods for user-centred design, the usability of electronic consumer products (e.g., portable music players, washing machines and mobile phones) is under pressure. Usability is the extent to which a product can be used by specified users to

Tracing Impact in a Usability Improvement Process

DEFF Research Database (Denmark)

Uldall-Espersen, Tobias; Frøkjær, Erik; Hornbæk, Kasper Anders Søren

2008-01-01

Analyzing usability improvement processes as they take place in real-life organizations is necessary to understand the practice of usability work. This paper describes a case study where the usability of an information system is improved and a relationship between the improvements...... and the evaluation efforts is established. Results show that evaluation techniques complemented each other by suggesting different kinds of usability improvement. Among the techniques applied, a combination of questionnaires and Metaphors of Human Thinking (MOT) showed the largest mean impact and MOT produced...... the largest number of impacts. Logging of real-life use of the system over 6 months indicated six aspects of improved usability, where significant differences among evaluation techniques were found. Concerning five of the six aspects Think Aloud evaluations and the above-mentioned combination of questionnaire...

[Comparative adaptation of crowns of selective laser melting and wax-lost-casting method].

Science.gov (United States)

Li, Guo-qiang; Shen, Qing-yi; Gao, Jian-hua; Wu, Xue-ying; Chen, Li; Dai, Wen-an

2012-07-01

To investigate the marginal adaptation of crowns fabricated by selective laser melting (SLM) and wax-lost-casting method, so as to provide an experimental basis for clinic. Co-Cr alloy full crown were fabricated by SLM and wax-lost-casting for 24 samples in each group. All crowns were cemented with zinc phosphate cement and cut along longitudinal axis by line cutting machine. The gap between crown tissue surface and die was measured by 6-point measuring method with scanning electron microscope (SEM). The marginal adaptation of crowns fabricated by SLM and wax-lost-casting were compared statistically. The gap between SLM crowns were (36.51 ± 2.94), (49.36 ± 3.31), (56.48 ± 3.35), (42.20 ± 3.60) µm, and wax-lost-casting crowns were (68.86 ± 5.41), (58.86 ± 6.10), (70.62 ± 5.79), (69.90 ± 6.00) µm. There were significant difference between two groups (P casting method and SLM method provide acceptable marginal adaptation in clinic, and the marginal adaptation of SLM is better than that of wax-lost-casting method.

Improving Public Relations Web Sites through Usability Research.

Science.gov (United States)

Hallahan, Kirk

2001-01-01

Argues that usability research has particular relevance for enhancing the effectiveness of websites. Examines the nature and value of usability research, and the elements of an effective website based on usability principles. (SR)

Distributed user interfaces usability and collaboration

CERN Document Server

Lozano, María D; Tesoriero, Ricardo; Penichet, Victor MR

2013-01-01

Written by international researchers in the field of Distributed User Interfaces (DUIs), this book brings together important contributions regarding collaboration and usability in Distributed User Interface settings. Throughout the thirteen chapters authors address key questions concerning how collaboration can be improved by using DUIs, including: in which situations a DUI is suitable to ease the collaboration among users; how usability standards can be used to evaluate the usability of systems based on DUIs; and accurately describe case studies and prototypes implementing these concerns

Determining casting defects in near-net shape casting aluminum parts by computed tomography

Science.gov (United States)

Li, Jiehua; Oberdorfer, Bernd; Habe, Daniel; Schumacher, Peter

2018-03-01

Three types of near-net shape casting aluminum parts were investigated by computed tomography to determine casting defects and evaluate quality. The first, second, and third parts were produced by low-pressure die casting (Al-12Si-0.8Cu-0.5Fe-0.9Mg-0.7Ni-0.2Zn alloy), die casting (A356, Al-7Si-0.3Mg), and semi-solid casting (A356, Al-7Si-0.3Mg), respectively. Unlike die casting (second part), low-pressure die casting (first part) significantly reduced the formation of casting defects (i.e., porosity) due to its smooth filling and solidification under pressure. No significant casting defect was observed in the third part, and this absence of defects indicates that semi-solid casting could produce high-quality near-net shape casting aluminum parts. Moreover, casting defects were mostly distributed along the eutectic grain boundaries. This finding reveals that refinement of eutectic grains is necessary to optimize the distribution of casting defects and reduce their size. This investigation demonstrated that computed tomography is an efficient method to determine casting defects in near-net shape casting aluminum parts.

From Playability to a Hierarchical Game Usability Model

OpenAIRE

Nacke, Lennart E.

2010-01-01

This paper presents a brief review of current game usability models. This leads to the conception of a high-level game development-centered usability model that integrates current usability approaches in game industry and game research.

Usability of PostgreSQL

OpenAIRE

Zeng, Xi

2011-01-01

My topic of the thesis is usability of PostgreSQL. It presents basic information aboutPostgreSQL, such as its history, function, and comparison with one of the most popular databases - MySQL. PostgreSQL has been tested in different environments and with different programming languages. The research is based on the documents from PostgreSQL official website.The thesis introduces and proves the usability and the compatibility of PostgreSQL. PostgreSQL has been installed on Windows workstation a...

A Longitudinal Study of Usability in Health Care

DEFF Research Database (Denmark)

Kjeldskov, Jesper; Skov, Mikael B.; Stage, Jan

2010-01-01

We report from a longitudinal laboratory-based usability evaluation of a health care information system. The purpose of the study was to inquire into the nature of usability problems experienced by novice and expert users, and to see to what extend usability problems of a health care information...... system may or may not disappear over time, as the nurses get more familiar with it-if time heals poor design? As our method for studying this, we conducted a longitudinal study with two key studies. A usability evaluation was conducted with novice users when an electronic patient record system was being......, we discuss implications for evaluating usability in health care....

Active Involvement of Software Developers in Usability Engineering

DEFF Research Database (Denmark)

Bornoe, Nis; Stage, Jan

2017-01-01

The essence of usability evaluations is to produce feedback that supports the downstream utility so the interaction design can be improved and problems can be fixed. In practice, software development organizations experience several obstacles for conducting usability engineering. One suggested...... approach is to train and involve developers in all phases of usability activities from evaluations, to problem reporting, and making redesign proposals. Only limited work has previously investigated the impact of actively involving developers in usability engineering. In this paper, we present two small......, and problem fixing. At the organizational level, we found that the attitude towards and understanding of the role of usability engineering improved....

PERBANDINGAN METODE EVALUASI USABILITY (STUDI KASUS : PENGGUNAAN PERANGKAT SMARTPHONE)

OpenAIRE

Hendradewa, Andrie Pasca

2017-01-01

Usability is a key factor that determine success of a product or interactive system, like smartphone. The increasing use of smartphone and its rapid technology development, requires usability evaluation method that is more accurate and effective to found usability problem, so it can be used for product improvement in development process. This study suggests a usability evaluation method that is most effective to identify problem in smartphone usage. Three usability evaluation methods that com...

Supplemental Immobilization of Hanford Low-Activity Waste: Cast Stone Screening Tests

Energy Technology Data Exchange (ETDEWEB)

Westsik, Joseph H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Piepel, Gregory F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lindberg, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Heasler, Patrick G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Mercier, Theresa M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Russell, Renee L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cozzi, Alex [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Daniel, William E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Eibling, Russell E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hansen, E. K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Reigel, Marissa M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Swanberg, David J. [Washington River Protection Solutions (WRPS), Aiken, SC (United States)

2013-09-30

More than 56 million gallons of radioactive and hazardous waste are stored in 177 underground storage tanks at the U.S. Department of Energy’s (DOE’s) Hanford Site in southeastern Washington State. The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is being constructed to treat the wastes and immobilize them in a glass waste form. The WTP includes a pretreatment facility to separate the wastes into a small volume of high-level waste (HLW) containing most of the radioactivity and a larger volume of low-activity waste (LAW) containing most of the nonradioactive chemicals. The HLW will be converted to glass in the HLW vitrification facility for ultimate disposal at an offsite federal repository. At least a portion (~35%) of the LAW will be converted to glass in the LAW vitrification facility and will be disposed of onsite at the Integrated Disposal Facility (IDF). The pretreatment and HLW vitrification facilities will have the capacity to treat and immobilize the wastes destined for each facility. However, a second LAW immobilization facility will be needed for the expected volume of LAW requiring immobilization. A cementitious waste form known as Cast Stone is being considered to provide the required additional LAW immobilization capacity. The Cast Stone waste form must be acceptable for disposal in the IDF. The Cast Stone waste form and immobilization process must be tested to demonstrate that the final Cast Stone waste form can comply with the waste acceptance criteria for the disposal facility and that the immobilization processes can be controlled to consistently provide an acceptable waste form product. Further, the waste form must be tested to provide the technical basis for understanding the long-term performance of the waste form in the disposal environment. These waste form performance data are needed to support risk assessment and performance assessment (PA) analyses of the long-term environmental impact of the waste disposal in the IDF

Marginal Accuracy of Castings Fabricated with Ringless Casting Investment System and Metal Ring Casting Investment System: A Comparative Study.

Science.gov (United States)

Kalavathi, M; Sachin, Bhuvana; Prasanna, B G; Shreeharsha, T V; Praveen, B; Ragher, Mallikarjuna

2016-02-01

The thermal expansion of the investment can be restricted by the metal casting ring because the thermal expansion of the ring is less than that of the investment. The ringless casting procedure is in use in clinical dentistry, though there is little scientific data to support its use in fixed partial dentures. In this study, marginal discrepancy of castings produced with the ringless casting technique and the conventional technique using the metal rings were compared. A total of 30 wax patterns were fabricated directly on a metal die. Optical stereomicroscope was used to measure the marginal discrepancy between the metal die and wax patterns. A total of 15 castings were invested using Bellavest T phosphate-bonded investment with the ringless technique and 15 were invested with the same investment with a metal ring; 30 castings were produced using a nickel-chromium ceramo-metal alloy. The internal surface of the castings was not modified and seated with finger pressure. The vertical marginal discrepancy was measured using an optical stereomicroscope at a magnification of 100x. The data obtained were statistically analyzed using students t-test (paired t-test and unpaired t-test). The castings of the ringless technique provided less vertical marginal discrepancy (240.56 ± 45.81 μ) than the castings produced with the conventional metal ring technique (281.98± 53.05 μ). The difference was statistically significant. The ringless casting technique had produced better marginal accuracy compared with conventional casting technique. Ringless casting system can be used routinely for clinical purpose.

Three Contexts for Evaluating Organizational Usability

DEFF Research Database (Denmark)

Hertzum, Morten

2018-01-01

Organizational usability is about the match between the user and the system, between the organization and the system, and between the environment and the system. While the first of these matches can, to a large extent, be evaluated in the lab, the two others cannot. Organizational usability must......, provide a brief example, and discuss the challenges it presents. To strengthen the focus on evaluation in the three contexts we propose the measurement of specified effects, combined with a sensitivity toward emergent effects. Incorporating effects in the evaluation of organizational usability makes...

A brain-computer interface based cognitive training system for healthy elderly: a randomized control pilot study for usability and preliminary efficacy.

Science.gov (United States)

Lee, Tih-Shih; Goh, Siau Juinn Alexa; Quek, Shin Yi; Phillips, Rachel; Guan, Cuntai; Cheung, Yin Bun; Feng, Lei; Teng, Stephanie Sze Wei; Wang, Chuan Chu; Chin, Zheng Yang; Zhang, Haihong; Ng, Tze Pin; Lee, Jimmy; Keefe, Richard; Krishnan, K Ranga Rama

2013-01-01

Cognitive decline in aging is a pressing issue associated with significant healthcare costs and deterioration in quality of life. Previously, we reported the successful use of a novel brain-computer interface (BCI) training system in improving symptoms of attention deficit hyperactivity disorder. Here, we examine the feasibility of the BCI system with a new game that incorporates memory training in improving memory and attention in a pilot sample of healthy elderly. This study investigates the safety, usability and acceptability of our BCI system to elderly, and obtains an efficacy estimate to warrant a phase III trial. Thirty-one healthy elderly were randomized into intervention (n = 15) and waitlist control arms (n = 16). Intervention consisted of an 8-week training comprising 24 half-hour sessions. A usability and acceptability questionnaire was administered at the end of training. Safety was investigated by querying users about adverse events after every session. Efficacy of the system was measured by the change of total score from the Repeatable Battery for the Assessment of Neuropsychological Status (RBANS) before and after training. Feedback on the usability and acceptability questionnaire was positive. No adverse events were reported for all participants across all sessions. Though the median difference in the RBANS change scores between arms was not statistically significant, an effect size of 0.6SD was obtained, which reflects potential clinical utility according to Simon's randomized phase II trial design. Pooled data from both arms also showed that the median change in total scores pre and post-training was statistically significant (Mdn = 4.0; pattention (p = 0.039), and delayed memory (pattention in healthy elderly, and appears to be safe, user-friendly and acceptable to senior users. Given the efficacy signal, a phase III trial is warranted. ClinicalTrials.gov NCT01661894.

Travelling Through Caste

OpenAIRE

Kumar, Raj

2016-01-01

With its peculiar caste system, India is considered the most stratified of all known societies in human history. This system is ‘peculiar’ as it divides human beings into higher and lower castes and this division is backed by certain religious sanctions based on the sociological concepts of ‘purity’ and ‘pollution’. While the higher caste is associated with ‘purity’, the lower caste is associated with ‘pollution’. The people of the lower castes are not allowed to undertake religious journeys ...

MATHEMATICAL MODEL FOR SOFTWARE USABILITY AUTOMATED EVALUATION AND ASSURANCE

Directory of Open Access Journals (Sweden)

І. Гученко

2011-04-01

Full Text Available The subject of the research is software usability and the aim is construction of mathematicalmodel of estimation and providing of the set level of usability. Methodology of structural analysis,methods of multicriterion optimization and theory of making decision, method of convolution,scientific methods of analysis and analogies is used in the research. The result of executed work isthe model for software usability automated evaluation and assurance that allows not only toestimate the current level of usability during every iteration of agile development but also tomanage the usability of created software products. Results can be used for the construction ofautomated support systems of management the software usability.

Caste and power

DEFF Research Database (Denmark)

Roy, Dayabati

2011-01-01

This paper explores the institution of caste and its operation in a micro-level village setting of West Bengal, an Indian state, where state politics at grass roots level is vibrant with functioning local self-government and entrenched political parties. This ethnographic study reveals that caste...... relations and caste identities have overarching dimensions in the day-to-day politics of the study villages. Though caste almost ceases to operate in relation to strict religious strictures, under economic compulsion the division of labour largely coincides with caste division. In the cultural......–ideological field, the concept of caste-hierarchy seems to continue as an influencing factor, even in the operation of leftist politics....

A usability evaluation of the prototype Afrikaanse idiome-woordeboek

African Journals Online (AJOL)

When digital tools are developed it is important to consider the usability of the tool. Usability evaluation was done on the Afrikaanse idiome-woordeboek to determine with what success it can be used. Discount usability methods, viz. heuristic evaluation and usability testing were used. This article reports on the findings from ...

Usability testing for the rest of us: the application of discount usability principles in the development of an online communications assessment application.

Science.gov (United States)

Brock, Douglas; Kim, Sara; Palmer, Odawni; Gallagher, Thomas; Holmboe, Eric

2013-01-01

Usability evaluation provides developers and educators with the means to understand user needs, improve overall product utility, and increase user satisfaction. The application of "discount usability" principles developed to make usability testing more practical and useful may improve user experience at minimal cost and require little existing expertise to conduct. We describe an application of discount usability to a high-fidelity online communications assessment application developed by the University of Washington for the American Board of Internal Medicine. Eight internal medicine physicians completed a discount usability test. Sessions were recorded and the videos analyzed for significant usability concerns. Concerns were identified, summarized, discussed, and prioritized by the authors in collaboration with the software developers before implementing any changes to the interface. Thirty-eight significant usability issues were detected and four technical problems were identified. Each issue was responded to through modification of the software, by providing additional instruction, or delayed for a later version to be developed. Discount usability can be easily implemented in academic developmental activities. Our study resulted in the discovery and remediation of significant user problems, in addition to giving important insight into the novel methods built into the application.

Standard digital reference images for investment steel castings for aerospace applications

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 The digital reference images provided in the adjunct to this standard illustrate various types and degrees of discontinuities occurring in thin-wall steel investment castings. Use of this standard for the specification or grading of castings requires procurement of the adjunct digital reference images which illustrate the discontinuity types and severity levels. They are intended to provide the following: 1.1.1 A guide enabling recognition of thin-wall steel casting discontinuities and their differentiation both as to type and degree through digital radiographic examination. 1.1.2 Example digital radiographic illustrations of discontinuities and a nomenclature for reference in acceptance standards, specifications and drawings. 1.2 Two illustration categories are covered as follows: 1.2.1 Graded—Six common discontinuity types each illustrated in eight degrees of progressively increasing severity. 1.2.2 Ungraded—Twelve single illustrations of additional discontinuity types and of patterns and imper...

Flaw evaluation of thermally aged cast stainless steel in light-water reactor applications

International Nuclear Information System (INIS)

Lee, S.; Kuo, P.T.; Wichman, K.; Chopra, O.

1997-01-01

Cast stainless steel may be used in the fabrication of the primary loop piping, fittings, valve bodies, and pump casings in light-water reactors. However, this material is subject to embrittlement due to thermal aging at the reactor temperature, that is 290 o C (550 o F). The Argonne National Laboratory (ANL) recently completed a research program and the results indicate that the lower-bound fracture toughness of thermally aged cast stainless steel is similar to that of submerged arc welds (SAWs). Thus, the US Nuclear Regulatory Commission (NRC) staff has accepted the use of SAW flaw evaluation procedures in IWB-3640 of Section XI of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code to evaluate flaws in thermally aged cast stainless steel for a license renewal evaluation. Alternatively, utilities may estimate component-specific fracture toughness of thermally aged cast stainless steel using procedures developed at ANL for a case-by-case flaw evaluation. (Author)

Usability Evaluation of www.budget.com

DEFF Research Database (Denmark)

Bruun, Anders; Jensen, Janne Jul; Skov, Mikael B.

This report presents the results of a usability evaluation of the budget.com website. The evaluation was carried out by a team of 4 HCI experts, and it involved 10 potential users. The evaluation is based on measurement of (1) task completion time, (2) task completion, (3) user satisfaction and (4......) perceived workload. We have also analyzed the user interaction with the website for (5) usability problems. Through the evaluation, we have found the following weaknesses of the website:   Reservation takes considerably more time than promised. The website indicates that a reservation can be made in 60...... is not useful for specific purposes. The user satisfaction is generally low. Except one high and two low scores, the user satisfaction was in the middle range. There are too many severe usability problems. The evaluation identified a considerable number of usability problems. 5 of them were critical which means...

Usability Testing: Too Early? Too Much Talking? Too Many Problems?

DEFF Research Database (Denmark)

Hertzum, Morten

2016-01-01

Usability testing has evolved in response to a search for tests that are cheap, early, easy, and fast. In addition, it accords with a situational definition of usability, such as the one propounded by ISO. By approaching usability from an organizational perspective, this author argues that usabil......Usability testing has evolved in response to a search for tests that are cheap, early, easy, and fast. In addition, it accords with a situational definition of usability, such as the one propounded by ISO. By approaching usability from an organizational perspective, this author argues...... that usability should (also) be evaluated late, that usability professionals should be wary of thinking aloud, and that they should focus more on effects achievement than problem detection....

Technological Aspects of Low-Alloyed Cast Steel Massive Casting Manufacturing

Directory of Open Access Journals (Sweden)

Szajnara J.

2013-12-01

Full Text Available In the paper authors have undertaken the attempt of explaining the causes of cracks net occurrence on a massive 3-ton cast steel casting with complex geometry. Material used for casting manufacturing was the low-alloyed cast steel with increased wear resistance modified with vanadium and titanium. The studies included the primary and secondary crystallization analysis with use of TDA and the qualitative and quantitative analysis of non-metallic inclusions.

Apathy towards the Integration of Usability Work

DEFF Research Database (Denmark)

Wale-Kolade, Adeola; Nielsen, Peter Axel

2016-01-01

In this article we report from a case study of a software development organization and we study in particular the developers’ and product managers’ attitudes towards integrating usability work into software development. We offer explanations based on system justification theory illuminating what...... would-be integrators might be up against. The analysis shows how the developers only pay lip service to usability work and how they treat users superficially. It further shows how that leads to stereotyping of usability designers and users in order to preserve status quo, and how internalization...... of inequality between the developers and usability designers rationalizes the preservation of status quo. These findings will have significant implications for managers of software development....

Usability evaluations in user-centred design

NARCIS (Netherlands)

Ruyter, de B.E.R.; Vet, de J.H.M.

1997-01-01

Improving usability of consumer applications has been the focus of much research. Estimating the advantage of these efforts, however, still is very cumbersome since evaluating product improvements in terms of their usability requires good measuring methods and tools. In this paper activities in the

Reducing the Incidence of Cast-related Skin Complications in Children Treated With Cast Immobilization.

Science.gov (United States)

Difazio, Rachel L; Harris, Marie; Feldman, Lanna; Mahan, Susan T

2017-12-01

Cast immobilization remains the mainstay of pediatric orthopaedic care, yet little is known about the incidence of cast-related skin complications in children treated with cast immobilization. The purposes of this quality improvement project were to: (1) establish a baseline rate of cast-related skin complications in children treated with cast immobilization, (2) identify trends in children who experienced cast-related skin complications, (3) design an intervention aimed at decreasing the rate of cast-related skin complications, and (4) determine the effectiveness of the intervention. A prospective interrupted time-series design was used to determine the incidence of cast-related skin complications overtime and compare the rates of skin complications before and after an intervention designed to decrease the incidence of cast-related heel complications. All consecutive patients who were treated with cast immobilization from September 2012 to September 2014 were included. A cast-related skin complications data collection tool was used to capture all cast-related skin complications. A high rate of heel events was noted in our preliminary analysis and an intervention was designed to decrease the rate of cast-related skin complications, including the addition of padding during casting and respective provider education. The estimated cast-related skin events rate for all patients was 8.9 per 1000 casts applied. The rate for the total preintervention sample was 13.6 per 1000 casts which decreased to 6.6 in the postintervention sample. When examining the heel-only group, the rate was 17.1 per 1000 lower extremity casts applied in the preintervention group and 6.8 in the postintervention group. Incorporating padding to the heel of lower extremity cast was an effective intervention in decreasing the incidence of cast-related skin complications in patients treated with cast immobilization. Level II.

Effectiveness and safety of a nonremovable fiberglass off-bearing cast versus a therapeutic shoe in the treatment of neuropathic foot ulcers: a randomized study.

Science.gov (United States)

Caravaggi, C; Faglia, E; De Giglio, R; Mantero, M; Quarantiello, A; Sommariva, E; Gino, M; Pritelli, C; Morabito, A

2000-12-01

To evaluate and compare the rate of reduction of the surface area of neuropathic plantar ulcers in diabetic patients treated with nonremovable rigidity-differentiated fiberglass off-bearing casts or a cloth shoe with a rigid sole with unloading alkaform insoles. The secondary aim was to evaluate the side effects and degree of patient acceptance of treatment. Fifty diabetic patients with neuropathic plantar ulcers were consecutively enrolled and randomized to one of two treatment groups. Of the 50 patients, 24 were treated with a specialized cloth shoe with a rigid sole and an unloading alkaform insole (shoe group), and 26 patients were treated with a nonremovable off-bearing fiberglass cast (cast group). All patients in both study groups returned to the clinic for weekly control visits. Their ulcers were treated with a standard dressing. Tracings of the ulcer area using a transparent dressing were performed on the day of entry to the study and after 30 days of treatment. The presence of new ulcerations caused by the use of the pressure-relief apparatus was recorded. Patient acceptance of the treatment was measured using a visual analog scale. At the end of the treatment period, an 8.3% increase of the ulcer area was observed in two patients in the shoe group, whereas in the cast group, no patient presented an increase. The reduction of the ulcer area was statistically more rapid in the cast group (Mann-Whitney test, P = 0.0004). Furthermore, the number of ulcers completely healed at the 30-day time point was 13 (50%) in the cast group and 5 (20.8%) in the shoe group (P = 0.03). In both groups, no side effects were recorded. The average score +/- SD of patient acceptance was 91.15 +/- 9.9 in the shoe group and 88.33 +/- 17.3 (NS) in the cast group. Our study has shown a significant difference in the speed of the reduction of neuropathic plantar ulcers treated with a fiberglass cast compared with a specialized cloth shoe. The use of fiberglass material with variable

Methods of Usability Testing in Libraries Web Sites

Directory of Open Access Journals (Sweden)

Eman Fawzy

2006-03-01

Full Text Available A Study about libraries' web sites evaluation, that is the Usability, the study talking about methods of usability testing and define it, and its important in web sites evaluation, then details the methods of usability: questionnaire, core groups, testing experimental model, cards arrangement, and composed evaluation.

Reusable Software Usability Specifications for mHealth Applications.

Science.gov (United States)

Cruz Zapata, Belén; Fernández-Alemán, José Luis; Toval, Ambrosio; Idri, Ali

2018-01-25

One of the key factors for the adoption of mobile technologies, and in particular of mobile health applications, is usability. A usable application will be easier to use and understand by users, and will improve user's interaction with it. This paper proposes a software requirements catalog for usable mobile health applications, which can be used for the development of new applications, or the evaluation of existing ones. The catalog is based on the main identified sources in literature on usability and mobile health applications. Our catalog was organized according to the ISO/IEC/IEEE 29148:2011 standard and follows the SIREN methodology to create reusable catalogs. The applicability of the catalog was verified by the creation of an audit method, which was used to perform the evaluation of a real app, S Health, application created by Samsung Electronics Co. The usability requirements catalog, along with the audit method, identified several usability flaws on the evaluated app, which scored 83%. Some flaws were detected in the app related to the navigation pattern. Some more issues related to the startup experience, empty screens or writing style were also found. The way a user navigates through an application improves or deteriorates user's experience with the application. We proposed a reusable usability catalog and an audit method. This proposal was used to evaluate a mobile health application. An audit report was created with the usability issues identified on the evaluated application.

Accuracy of ringless casting and accelerated wax-elimination technique: a comparative in vitro study.

Science.gov (United States)

Prasad, Rahul; Al-Keraif, Abdulaziz Abdullah; Kathuria, Nidhi; Gandhi, P V; Bhide, S V

2014-02-01

The purpose of this study was to determine whether the ringless casting and accelerated wax-elimination techniques can be combined to offer a cost-effective, clinically acceptable, and time-saving alternative for fabricating single unit castings in fixed prosthodontics. Sixty standardized wax copings were fabricated on a type IV stone replica of a stainless steel die. The wax patterns were divided into four groups. The first group was cast using the ringless investment technique and conventional wax-elimination method; the second group was cast using the ringless investment technique and accelerated wax-elimination method; the third group was cast using the conventional metal ring investment technique and conventional wax-elimination method; the fourth group was cast using the metal ring investment technique and accelerated wax-elimination method. The vertical marginal gap was measured at four sites per specimen, using a digital optical microscope at 100× magnification. The results were analyzed using two-way ANOVA to determine statistical significance. The vertical marginal gaps of castings fabricated using the ringless technique (76.98 ± 7.59 μm) were significantly less (p castings fabricated using the conventional metal ring technique (138.44 ± 28.59 μm); however, the vertical marginal gaps of the conventional (102.63 ± 36.12 μm) and accelerated wax-elimination (112.79 ± 38.34 μm) castings were not statistically significant (p > 0.05). The ringless investment technique can produce castings with higher accuracy and can be favorably combined with the accelerated wax-elimination method as a vital alternative to the time-consuming conventional technique of casting restorations in fixed prosthodontics. © 2013 by the American College of Prosthodontists.

A continuous usability evaluation of an electronic medication administration record application.

Science.gov (United States)

Vicente Oliveros, Noelia; Gramage Caro, Teresa; Pérez Menéndez-Conde, Covadonga; Álvarez-Diaz, Ana María; Martín-Aragón Álvarez, Sagrario; Bermejo Vicedo, Teresa; Delgado Silveira, Eva

2017-12-01

The complexity of an electronic medication administration record (eMAR) has been underestimated by most designers in the past. Usability issues, such as poorly designed user application flow in eMAR, are therefore of vital importance, since they can have a negative impact on nursing activities and result in poor outcomes. The purpose of this study was to evaluate the usability of an eMAR application during its development. A usability evaluation was conducted during the development of the eMAR application. Two usability methods were used: a heuristic evaluation complemented by usability testing. Each eMAR application version provided by the vendor was evaluated by 2 hospital pharmacists, who applied the heuristic method. They reviewed the eMAR tasks, detected usability problems and their heuristic violations, and rated the severity of the usability problems. Usability testing was used to assess the final application version by observing how 3 nurses interacted with the application. Thirty-four versions were assessed before the eMAR application was considered usable. During the heuristic evaluation, the usability problems decreased from 46 unique usability problems in version 1 (V1) to 9 in version 34 (V34). In V1, usability problems were categorized into 154 heuristic violations, which decreased to 27 in V34. The average severity rating also decreased from major usability problem (2.96) to no problem (0.23). During usability testing, the 3 nurses did not encounter new usability problems. A thorough heuristic evaluation is a good method for obtaining a usable eMAR application. This evaluation points key areas for improvement and decreases usability problems and their severity. © 2017 John Wiley & Sons, Ltd.

Usability Evaluation of a Web-Based Learning System

Science.gov (United States)

Nguyen, Thao

2012-01-01

The paper proposes a contingent, learner-centred usability evaluation method and a prototype tool of such systems. This is a new usability evaluation method for web-based learning systems using a set of empirically-supported usability factors and can be done effectively with limited resources. During the evaluation process, the method allows for…

Evaluation of the pattern dimensions of cast-metal posts in uniradicular teeth

Directory of Open Access Journals (Sweden)

Rafael de Assunção Vital

Full Text Available Introduction Accurate dimensions of cast-metal posts are relevant to the survival of dental prostheses. Objective The aim of this study was to verify if the dimensions of cast-metal posts accord with ideal clinical criteria. Material and method For the evaluation, 285 periapical radiographs, from a total of 80 teeth, were taken from the charts of patients that attended the clinics at the Dental School of the Federal University of Goiás, from March 2008 to October 2012. Only periapical radiographs of single-rooted teeth with post and core were included in the study. The radiographic evaluation was conducted with the assistance of a magnifying glass and a view box, in a room with low luminosity. The dimensions of the post and core were established with the help of a digital caliper, and the following measurements were considered: a LR (Length Remnant; b LP (Length Post; c BS (Bone Support; d DR (Diameter Root; e DP (mesiodistal diameter post. The post and core were classified as acceptable or deficient by reference values with a margin of error of 0.2 mm. For descriptive analysis, the data were cataloged using SPSS software (version 17.0. Result With regard to the length of the post and core, only 26.25% and 43.75% of the post and core were classified as acceptable according to the two-thirds rule and fulcrum dental rule, respectively. With regard to the mesiodistal diameter of the post and core, 55% were classified as acceptable. Conclusion Within the limits of this study, it can be concluded that the cast-metal posts evaluated do not accord with the ideal clinical criteria.

Selective Leaching of Gray Cast Iron: Electrochemical Aspects

International Nuclear Information System (INIS)

Na, Kyung Hwan; Yun, Eun Sub; Park, Young Sheop

2010-01-01

Currently, to keep step with increases in energy consumption, much attention has been paid to the construction of new nuclear power plants (NPPs) and to the continued operation of NPPs. For continued operation, the selective leaching of materials should be evaluated by visual inspections and hardness measurements as a part of One-Time Inspection Program according to the requirements of the guidelines for continued operation of pressured water reactors (PWRs) in Korea and license renewals in the United States, entitled the 'Generic Aging Lessons Learned (GALL) report.' However, the acceptance criteria for hardness have yet to be provided. Recently, USNRC released a new draft of the GALL report for comment and plans to publish its formal version by the end of 2010. In the new draft, the quantitative acceptance criteria for hardness are given at last: no more than a 20 percent decrease in hardness for gray cast iron and brass containing more than 15 percent zinc. Selective leaching is the preferential removal of one of the alloying elements from a solid alloy by corrosion processes, leaving behind a weakened spongy or porous residual structure. The materials susceptible to selective leaching include gray cast iron and brass, which are mainly used as pump casings and valve bodies in the fire protection systems of NPPs. Since selective leaching proceeds slowly during a long period of time and causes a decrease in strength without changing the overall dimensions of original material, it is difficult to identify. In the present work, the selective leaching of gray cast iron is investigated in terms of its electrochemical aspects as part of an ongoing research project to study the changes in metal properties by selective leaching

Usability and Gratifications--Towards a Website Analysis Model.

Science.gov (United States)

Bunz, Ulla K.

This paper discusses Web site usability issues. Specifically, it assumes that the usability of a Web site depends more on the perception of the user than on the objectively assessable usability criteria of the Web site. Two pilot studies, based on theoretical notions of uses and gratifications theory and similar theories, are presented. In the…

Mobile Usability Testing in Healthcare: Methodological Approaches.

Science.gov (United States)

Borycki, Elizabeth M; Monkman, Helen; Griffith, Janessa; Kushniruk, Andre W

2015-01-01

The use of mobile devices and healthcare applications is increasing exponentially worldwide. This has lead to the need for the healthcare industry to develop a better understanding of the impact of the usability of mobile software and hardware upon consumer and health professional adoption and use of these technologies. There are many methodological approaches that can be employed in conducting usability evaluation of mobile technologies. More obtrusive approaches to collecting study data may lead to changes in study participant behaviour, leading to study results that are less consistent with how the technologies will be used in the real-world. Alternatively, less obstrusive methods used in evaluating the usability of mobile software and hardware in-situ and laboratory settings can lead to less detailed information being collected about how an individual interacts with both the software and hardware. In this paper we review and discuss several innovative mobile usability evaluation methods on a contiuum from least to most obtrusive and their effects on the quality of the usability data collected. The strengths and limitations of methods are also discussed.

Evaluation Methods on Usability of M-Learning Environments

Directory of Open Access Journals (Sweden)

Teresa Magal-Royo

2007-10-01

Full Text Available Nowadays there are different evaluation methods focused in the assessment of the usability of telematic methods. The assessment of 3rd generation web environments evaluates the effectiveness and usability of application with regard to the user needs. Wireless usability and, specifically in mobile phones, is concentrated in the validation of the features and tools management using conventional interactive environments. There is not a specific and suitable criterion to evaluate created environments and m-learning platforms, where the restricted and sequential representation is a fundamental aspect to be considered.The present paper exposes the importance of the conventional usability methods to verify both: the employed contents in wireless formats, and the possible interfaces from the conception phases, to the validations of the platform with such characteristics.The development of usability adapted inspection could be complemented with the Remote’s techniques of usability testing, which are being carried out these days in the mobile devices field and which pointed out the need to apply common criteria in the validation of non-located learning scenarios.

Hands-off and hands-on casting consistency of amputee below knee sockets using magnetic resonance imaging.

Science.gov (United States)

Safari, Mohammad Reza; Rowe, Philip; McFadyen, Angus; Buis, Arjan

2013-01-01

Residual limb shape capturing (Casting) consistency has a great influence on the quality of socket fit. Magnetic Resonance Imaging was used to establish a reliable reference grid for intercast and intracast shape and volume consistency of two common casting methods, Hands-off and Hands-on. Residual limbs were cast for twelve people with a unilateral below knee amputation and scanned twice for each casting concept. Subsequently, all four volume images of each amputee were semiautomatically segmented and registered to a common coordinate system using the tibia and then the shape and volume differences were calculated. The results show that both casting methods have intra cast volume consistency and there is no significant volume difference between the two methods. Inter- and intracast mean volume differences were not clinically significant based on the volume of one sock criteria. Neither the Hands-off nor the Hands-on method resulted in a consistent residual limb shape as the coefficient of variation of shape differences was high. The resultant shape of the residual limb in the Hands-off casting was variable but the differences were not clinically significant. For the Hands-on casting, shape differences were equal to the maximum acceptable limit for a poor socket fit.

Radiography of Co-60 in the lead cube castings

International Nuclear Information System (INIS)

Djoli Soembogo; Harun Al Rasyid R; Namad Sianta

2016-01-01

Radiography Co-60 on Carbon steel or Stainless steel has been widely applied, but for metal Lead has not yet been applied and has not yet widely known. Lead has a greater density than Carbon steel or Stainless steel and could muffle gamma radiation so it takes a longer exposure time. The result of its film radiography are also not as good as compared to radiography applications on carbon steel or Stainless steel. The study also applied digital radiography using isotope Co-60 sources and used Epson V700 scanner positive film for digitization results of conventional radiographic films. These radiographs using film AGFA D7 to get the contrast medium, medium sensitivity and good image quality. The purpose of radiography Co-60 on the cube castings Lead is to find indications of defective castings cube Lead and digitizing the results using conventional radiographic film with a positive film media scanner to process the data transfer and storage of digital data. Radiographic testing has been carried out using the isotope Co-60 on metal castings Lead with a single thickness of a single shadow method using positive film scanner media and isotope Co-60 with disabilities observation parameter Lead metal castings on radiographic film. Co-60 radiation time exposure is 3,500 hours for the thickness of the metal cube castings Lead 100 mm with the activity of 29 Ci and perpendicular SFD of 840 mm. Radiographic testing on metal cube castings Lead by the method of a single thickness of single image defects produce a parameter indicative for a cube of metal castings Lead of porosity level 2. The density mean of radiographic film was 2.051 and 2.046 for 5 minutes in a developer solution. The result of scanning positive film is in the form of digital radiography which allows for the transfer of digital data or computerized storage of digital data. This status is still within limits acceptable under the standards referred. (author)

Effect of cast steel production metallurgy on the emergence of casting defects

Directory of Open Access Journals (Sweden)

L. Čamek

2016-10-01

Full Text Available The paper documents metallurgical possibilities of high alloy cast steel production in open induction medium frequency furnaces and an electric arc furnace in a gravity die casting foundry. The observation was focused on the emergence of gas defects in steel castings. The content of gases achieved during the metallurgical processes was evaluated for every unit of the production equipment and the casting ladle before casting into disposable sand moulds. The sand mould area was considered to be constant. The aim was to evaluate the current metallurgical possibilities of affecting the content of gases in high alloy cast steel in the current technical conditions of the foundry.

Virtual gaming simulation of a mental health assessment: A usability study.

Science.gov (United States)

Verkuyl, Margaret; Romaniuk, Daria; Mastrilli, Paula

2018-05-18

Providing safe and realistic virtual simulations could be an effective way to facilitate the transition from the classroom to clinical practice. As nursing programs begin to include virtual simulations as a learning strategy; it is critical to first assess the technology for ease of use and usefulness. A virtual gaming simulation was developed, and a usability study was conducted to assess its ease of use and usefulness for students and faculty. The Technology Acceptance Model provided the framework for the study, which included expert review and testing by nursing faculty and nursing students. This study highlighted the importance of assessing ease of use and usefulness in a virtual game simulation and provided feedback for the development of an effective virtual gaming simulation. The study participants said the virtual gaming simulation was engaging, realistic and similar to a clinical experience. Participants found the game easy to use and useful. Testing provided the development team with ideas to improve the user interface. The usability methodology provided is a replicable approach to testing virtual experiences before a research study or before implementing virtual experiences into curriculum. Copyright © 2018 Elsevier Ltd. All rights reserved.

SPRAY CASTING

OpenAIRE

SALAMCI, Elmas

2010-01-01

ABSTRACT This paper is designed to provide a basic review of spray casting. A brief overview of the historical development of spray  casting and the description of plant and equipment have been given. Following metallurgical characteristics of spray formed alloys, process parameters and solidification mechanism of spray deposition have been discussed in detail. Finally, microstructure and mechanical properties of the selected spray cast Al-Zn-Mg-Cu alloys have been presented and comp...

A Framework for Usability Evaluation in EHR Procurement.

Science.gov (United States)

Tyllinen, Mari; Kaipio, Johanna; Lääveri, Tinja

2018-01-01

Usability should be considered already by the procuring organizations when selecting future systems. In this paper, we present a framework for usability evaluation during electronic health record (EHR) system procurement. We describe the objectives of the evaluation, the procedure, selected usability attributes and the evaluation methods to measure them. We also present the emphasis usability had in the selection process. We do not elaborate on the details of the results, the application of methods or gathering of data. Instead we focus on the components of the framework to inform and give an example to other similar procurement projects.

Quality problems root cause identification and variability reduction in casting processes

Directory of Open Access Journals (Sweden)

G. Furgał

2009-01-01

Full Text Available Increasing customer requirements and production costs force casting manufacturers to adopt a methodological approach to manufacturingprocesses, in order to deliver increasingly more repeatable, predictable and competitive products. One of the methods of achieving such results is the reduction of variability of manufacturing processes and the optimization of their control. This paper presents the possibilities granted by the Six Sigma methodology in efficient identification of special factors influencing pre-heat of ceramic moulds and castingparameters, in the minimization of the frequency at which they occur, and in the reduction of key process parameters variability. This paper also shows the usability of the method in achieving measurable business advantages for the company using the example of one DMAIC methodology based project realized in the Investment Foundry Department of WSK “PZL-Rzeszow” S.A.

Meta-Analysis of Correlations Among Usability Measures

DEFF Research Database (Denmark)

Hornbæk, Kasper Anders Søren; Effie Lai Chong, Law

2007-01-01

are generally low: effectiveness measures (e.g., errors) and efficiency measures (e.g., time) has a correlation of .247 ± .059 (Pearson's product-moment correlation with 95% confidence interval), efficiency and satisfaction (e.g., preference) one of .196 ± .064, and effectiveness and satisfaction one of .164......Understanding the relation between usability measures seems crucial to deepen our conception of usability and to select the right measures for usability studies. We present a meta-analysis of correlations among usability measures calculated from the raw data of 73 studies. Correlations...... ± .062. Changes in task complexity do not influence these correlations, but use of more complex measures attenuates them. Standard questionnaires for measuring satisfaction appear more reliable than homegrown ones. Measures of users' perceptions of phenomena are generally not correlated with objective...

Intra- and Inter-Cultural Usability in Computer-Supported Collaboration

DEFF Research Database (Denmark)

Vatrapu, Ravi; Suthers, Dan

2010-01-01

In this paper, we argue for an increased scope of universal design to encompass usability and accessibility for not only users with physical disabilities but also for users from different cultures. Towards this end, we present an empirical evaluation of cultural usability in computer......-Chinese, and Chinese-Chinese) appropriated affordances and produced technological intersubjectivity. Cultural usability was analyzed through the use of performance and satisfaction measures. The results show a systemic variation in efficiency, effectiveness, and satisfaction between the two cultural groups....... Implications of these findings for the research and practice of usability, in general, and cultural usability, in particular, are discussed in this paper....

Evaluation of Usability Utilizing Markov Models

Science.gov (United States)

Penedo, Janaina Rodrigues; Diniz, Morganna; Ferreira, Simone Bacellar Leal; Silveira, Denis S.; Capra, Eliane

2012-01-01

Purpose: The purpose of this paper is to analyze the usability of a remote learning system in its initial development phase, using a quantitative usability evaluation method through Markov models. Design/methodology/approach: The paper opted for an exploratory study. The data of interest of the research correspond to the possible accesses of users…

TECHNOLOGICAL PARAMETERS OF SLUGS CASTING OF GREY CAST IRON BY FROSTING

Directory of Open Access Journals (Sweden)

E. I. Marukovich

2009-01-01

Full Text Available The relation of geometrical parametres of casting with technological ones is shown. The monogram for definition of basic technological parametres of obtaining of castings by the method of continuously-cyclic iterative casting by freezing-up is presented.

Usability evaluation techniques in mobile commerce applications: A systematic review

Science.gov (United States)

Hussain, Azham; Mkpojiogu, Emmanuel O. C.

2016-08-01

Obviously, there are a number of literatures concerning the usability of mobile commerce (m-commerce) applications and related areas, but they do not adequately provide knowledge about usability techniques used in most of the empirical usability evaluation for m-commerce application. Therefore, this paper is aimed at producing the usability techniques frequently used in the aspect of usability evaluation for m-commerce applications. To achieve the stated objective, systematic literature review was employed. Sixty seven papers were downloaded in usability evaluation for m-commerce and related areas; twenty one most relevant studies were selected for review in order to extract the appropriate information. The results from the review shows that heuristic evaluation, formal test and think aloud methods are the most commonly used methods in m-commerce application in comparison to cognitive walkthrough and the informal test methods. Moreover, most of the studies applied control experiment (33.3% of the total studies); other studies that applied case study for usability evaluation are 14.28%. The results from this paper provide additional knowledge to the usability practitioners and research community for the current state and use of usability techniques in m-commerce application.

Usability in a cultural context

DEFF Research Database (Denmark)

Clemmensen, Torkil; Yammiyavar, Pradeep; Ørngreen, Rikke

2010-01-01

This paper focuses on presenting and discussing the aim, context, challenges, results, and impact of the Cultural usability project named as CultUsab. This project was a four year international research effort from 2006 to 2009, which was supported by a grant for the Danish Research Councils...... for Independent Research in Culture and Communication. The project aimed at innovating processes in Information and Communication Technology development through an understanding of culturally sensitive aspects of usability evaluation methods....

Colour Metallography of Cast Iron - Chapter 3: Spheroidal Graphite Cast Iron (Ⅳ

Directory of Open Access Journals (Sweden)

Zhou Jiyang

2010-11-01

Full Text Available Cast iron, as a traditional metal material, has advantages of low total cost, good castability and machinability, good wear resistance and low notch sensitivity, and is still facing tough challenge in quality, property and variety of types etc. Experts and engineers studying and producing iron castings all around world extremely concern this serious challenge. Over more than 30 years, a great of research work has been carried out on how to further improve its property, expand its application and combine cast iron technology with some hi-techs (for example, computer technology. Nevertheless, cast iron is a multi-element and multi-phase alloy and has complex and variety of structures and still has great development potential in structure and property. For further studying and developing cast iron, theoretical research work is important promise, and the study on solidification process and control mechanism of graphite morphology is fundamental for improving property of cast iron and developing new type of cast iron. Metallography of cast iron normally includes two sections: liquid phase transformation and solid phase transformation. The book, Colour Metallography of Cast Iron, uses colour metallography technique to study solidification structures of cast irons: graphite, carbides, austenite and eutectics; and focuses on solidification processes. With progress of modern solidification theory, the control of material solidification process becomes important measure for improving traditional materials and developing new materials. Solidification structure not only influences mechanical and physical properties of cast iron, but also affects its internal quality. The book uses a large amount of colour photos to describe the formation of solidification structures and their relations. Crystallization phenomena, which cannot be displayed with traditional metallography, are presented and more phase transformation information is obtained from these colour

Colour Metallography of Cast Iron - Chapter 3: Spheroidal Graphite Cast Iron (Ⅰ

Directory of Open Access Journals (Sweden)

Zhou Jiyang

2010-02-01

Full Text Available Cast iron, as a traditional metal material, has advantages of low total cost, good castability and machinability, good wear resistance and low notch sensitivity, and is still facing tough challenge in quality, property and variety of types etc. Experts and engineers studying and producing iron castings all around world extremely concern this serious challenge. Over more than 30 years, a great of research work has been carried out on how to further improve its property, expand its application and combine cast iron technology with some hi-techs (for example, computer technology. Nevertheless, cast iron is a multi-element and multi-phase alloy and has complex and variety of structures and still has great development potential in structure and property. For further studying and developing cast iron, theoretical research work is important promise, and the study on solidification process and control mechanism of graphite morphology is fundamental for improving property of cast iron and developing new type of cast iron. Metallography of cast iron normally includes two sections: liquid phase transformation and solid phase transformation. The book, Colour Metallography of Cast Iron, uses colour metallography technique to study solidification structures of cast irons: graphite, carbides, austenite and eutectics; and focuses on solidification processes. With progress of modern solidification theory, the control of material solidification process becomes important measure for improving traditional materials and developing new materials. Solidification structure not only influences mechanical and physical properties of cast iron, but also affects its internal quality. The book uses a large amount of colour photos to describe the formation of solidification structures and their relations. Crystallization phenomena, which cannot be displayed with traditional metallography, are presented and more phase transformation information is obtained from these colour

Colour Metallography of Cast Iron - Chapter 4: Vermicular Graphite Cast Iron (Ⅱ

Directory of Open Access Journals (Sweden)

Zhou Jiyang

2011-05-01

Full Text Available Cast iron, as a traditional metal material, has advantages of low total cost, good castability and machinability, good wear resistance and low notch sensitivity, and is still facing tough challenge in quality, property and variety of types etc. Experts and engineers studying and producing iron castings all around world extremely concern this serious challenge. Over more than 30 years, a great of research work has been carried out on how to further improve its property, expand its application and combine cast iron technology with some hi-techs (for example, computer technology. Nevertheless, cast iron is a multi-element and multi-phase alloy and has complex and variety of structures and still has great development potential in structure and property. For further studying and developing cast iron, theoretical research work is important promise, and the study on solidification process and control mechanism of graphite morphology is fundamental for improving property of cast iron and developing new type of cast iron. Metallography of cast iron normally includes two sections: liquid phase transformation and solid phase transformation. The book, Colour Metallography of Cast Iron, uses colour metallography technique to study solidification structures of cast irons: graphite, carbides, austenite and eutectics; and focuses on solidification processes. With progress of modern solidification theory, the control of material solidification process becomes important measure for improving traditional materials and developing new materials. Solidification structure not only influences mechanical and physical properties of cast iron, but also affects its internal quality. The book uses a large amount of colour photos to describe the formation of solidification structures and their relations. Crystallization phenomena, which cannot be displayed with traditional metallography, are presented and more phase transformation information is obtained from these colour

Why Citizen Science Without Usability Testing Will Underperform

Science.gov (United States)

Romano, C.; Gay, P.; Owens, R.; Burlea, G.

2017-12-01

Citizen science projects must undergo usability testing and optimization if they are to meet their stated goals. This presentation will include video of usability tests conducted upon citizen science websites. Usability testing is essential to the success of online interaction, however, citizen science projects have just begun to include this critical activity. Interaction standards in citizen science lag behind those of commercial interests, and published research on this topic is limited. Since online citizen science is by definition, an exchange of information, a clear understanding of how users experience an online project is essential to informed decision-making. Usability testing provides that insight. Usability testing collects data via direct observation of a person while she interacts with a digital product, such as a citizen science website. The test participant verbalizes her thoughts while using the website or application; the moderator follows the participant and captures quantitative measurement of the participant's confidence of success as she advances through the citizen science project. Over 15 years of usability testing, we have observed that users who do not report a consistent sense of progress are likely to abandon a website after as few as three unrewarding interactions. Since citizen science is also a voluntary activity, ensuring seamless interaction for users is mandatory. Usability studies conducted on citizen science websites demonstrate that project teams frequently underestimate a user's need for context and ease of use. Without usability testing, risks to online citizen science projects include high bounce rate (users leave the website without taking any action), abandonment (of the website, tutorials, registration), misunderstanding instructions (causing disorientation and erroneous conclusions), and ultimately, underperforming projects.

Usability Evaluation of Public Web Mapping Sites

Science.gov (United States)

Wang, C.

2014-04-01

Web mapping sites are interactive maps that are accessed via Webpages. With the rapid development of Internet and Geographic Information System (GIS) field, public web mapping sites are not foreign to people. Nowadays, people use these web mapping sites for various reasons, in that increasing maps and related map services of web mapping sites are freely available for end users. Thus, increased users of web mapping sites led to more usability studies. Usability Engineering (UE), for instance, is an approach for analyzing and improving the usability of websites through examining and evaluating an interface. In this research, UE method was employed to explore usability problems of four public web mapping sites, analyze the problems quantitatively and provide guidelines for future design based on the test results. Firstly, the development progress for usability studies were described, and simultaneously several usability evaluation methods such as Usability Engineering (UE), User-Centered Design (UCD) and Human-Computer Interaction (HCI) were generally introduced. Then the method and procedure of experiments for the usability test were presented in detail. In this usability evaluation experiment, four public web mapping sites (Google Maps, Bing maps, Mapquest, Yahoo Maps) were chosen as the testing websites. And 42 people, who having different GIS skills (test users or experts), gender (male or female), age and nationality, participated in this test to complete the several test tasks in different teams. The test comprised three parts: a pretest background information questionnaire, several test tasks for quantitative statistics and progress analysis, and a posttest questionnaire. The pretest and posttest questionnaires focused on gaining the verbal explanation of their actions qualitatively. And the design for test tasks targeted at gathering quantitative data for the errors and problems of the websites. Then, the results mainly from the test part were analyzed. The

The structure of abrasion-resisting castings made of chromium cast iron

Directory of Open Access Journals (Sweden)

D. Kopyciński

2011-01-01

Full Text Available In this study presents the analyse of chrome iron cast structure (as-cast condition which are used in rugged conditions abrasion-percussive and high temperature. While producing the casts of chrome iron major influence has been preserve the structure of technologi cal process parameters. The addition to Fe-C-Cr alloy Ni, Mo or Cu and then proper heat treatment leads to the improvement of functional and mechanical cast qualities. Then it is possible to develop high mechanical properties which are recommended by PN-EN12513. As can it be seen from the above research silicon is an adverse chemical element in this kind of alloy cast iron. However, the reason of cracksappearing in chrome iron casts are phosphorus eutectic microareas. When the compound of Si and P reach the critical point, described inPN-88/H-83144 outdated standard, the microareas might appear.

The deformation of wax patterns and castings in investment casting technology

Directory of Open Access Journals (Sweden)

A. Herman

2012-01-01

Full Text Available The dimensional accuracy of the final casting of Inconel alloy 738 LC is affected by many aspects. One of them is the choice of method and time of cooling wax model for precision investment casting. The main objective was to study the initial deformation of the complex shape of the casting of the rotor blades. Various approaches have been tested for cooling wax pattern. When wax models are cooling on the air, without clamping in jig for cooling, deviations from the ideal shape of the casting are very noticeable (up to 8 mm and most are in extreme positions of the model. When blade is cooled in fixing jig in water environment, the resulting deviations compared with cooling in air are significantly larger, sometimes up to 10 mm. This itself does not mean that the final shape of the casting is dimensionally more accurate with usage of wax models, which have deviations from the ideal position smaller. Another deformation occurs when shell mould is produced around wax pattern and furthermore deformations emerge while casting of blade is cooling. This paper demonstrates first steps in describing complex process of deformations of Inconel alloy blades produced with investment casting technology by comparing results from thermal imagery, simulations in foundry simulation software ProCAST 2010 and measurements from CNC scanning system Carl Zeiss MC 850. Conclusions are so far not groundbreaking, but it seems deformations of wax pattern and deformations of castings do in some cases cancel each other by having opposite directions. Describing entirely whole process of deformations will help increase precision of blade castings so that models at the beginning and blades in the end are the same.

Usability: Human Research Program - Space Human Factors and Habitability

Science.gov (United States)

Sandor, Aniko; Holden, Kritina L.

2009-01-01

The Usability project addresses the need for research in the area of metrics and methodologies used in hardware and software usability testing in order to define quantifiable and verifiable usability requirements. A usability test is a human-in-the-loop evaluation where a participant works through a realistic set of representative tasks using the hardware/software under investigation. The purpose of this research is to define metrics and methodologies for measuring and verifying usability in the aerospace domain in accordance with FY09 focus on errors, consistency, and mobility/maneuverability. Usability metrics must be predictive of success with the interfaces, must be easy to obtain and/or calculate, and must meet the intent of current Human Systems Integration Requirements (HSIR). Methodologies must work within the constraints of the aerospace domain, be cost and time efficient, and be able to be applied without extensive specialized training.

Usability Evaluation for Business Intelligence Applications: A User Support Perspective

Directory of Open Access Journals (Sweden)

Chrisna Jooste

2014-08-01

Full Text Available Business Intelligence (BI applications provide business information to drive decision support. Usability is one of the factors determining the optimal use and eventual benefit derived from BI applications. The documented need for more BI usability research together with the practical necessity for BI evaluation guidelines in the mining industry provides the rationale for this study. The purpose of the study was to investigate the usability evaluation of BI applications in the context of a coal mining organization. The research is guided by the question: How can existing usability criteria be customized to evaluate the usability of BI applications. The research design included user observation, heuristic evaluation and a survey. Based on observations made during user support on a BI application used at a coal mining organization a log of usability issues was compiled. The usability issues extracted from this log was compared and contrasted with general usability criteria from literature to synthesize an initial set of BI usability evaluation criteria. These criteria were used as the basis for a heuristic evaluation of the BI application used at the coal mining organization. The same BI application was also evaluated using the Software Usability Measurement Inventory (SUMI standardized questionnaire. The results from the two evaluations were triangulated and then compared with the BI user issues again to contextualize the findings and synthesize a validated and refined set of criteria. The main contribution of the study is the usability evaluation criteria for BI applications presented as guidelines. These guidelines deviate from existing evaluation guidelines in the emphasis on information architecture, learnability and operability.

Educational software usability: Artifact or Design?

Science.gov (United States)

Van Nuland, Sonya E; Eagleson, Roy; Rogers, Kem A

2017-03-01

Online educational technologies and e-learning tools are providing new opportunities for students to learn worldwide, and they continue to play an important role in anatomical sciences education. Yet, as we shift to teaching online, particularly within the anatomical sciences, it has become apparent that e-learning tool success is based on more than just user satisfaction and preliminary learning outcomes-rather it is a multidimensional construct that should be addressed from an integrated perspective. The efficiency, effectiveness and satisfaction with which a user can navigate an e-learning tool is known as usability, and represents a construct which we propose can be used to quantitatively evaluate e-learning tool success. To assess the usability of an e-learning tool, usability testing should be employed during the design and development phases (i.e., prior to its release to users) as well as during its delivery (i.e., following its release to users). However, both the commercial educational software industry and individual academic developers in the anatomical sciences have overlooked the added value of additional usability testing. Reducing learner frustration and anxiety during e-learning tool use is essential in ensuring e-learning tool success, and will require a commitment on the part of the developers to engage in usability testing during all stages of an e-learning tool's life cycle. Anat Sci Educ 10: 190-199. © 2016 American Association of Anatomists. © 2016 American Association of Anatomists.

The Usability and Effectiveness of Mobile Health Technology–Based Lifestyle and Medical Intervention Apps Supporting Health Care During Pregnancy: Systematic Review

Science.gov (United States)

Rosman, Ageeth N; van Beukering, Monique DM; Kok, Marjolein

2018-01-01

Background A growing number of mobile health (mHealth) technology–based apps are being developed for personal lifestyle and medical health care support, of which several apps are related to pregnancy. Evidence on usability and effectiveness is limited but crucial for successful implementation. Objective This study aimed to evaluate the usability, that is, feasibility and acceptability, as well as effectiveness of mHealth lifestyle and medical apps to support health care during pregnancy in high-income countries. Feasibility was defined as the actual use, interest, intention, and continued use; perceived suitability; and ability of users to carry out the activities of the app. Acceptability was assessed by user satisfaction, appreciation, and the recommendation of the app to others. Methods We performed a systematic review searching the following electronic databases for studies on mHealth technology–based apps in maternal health care in developed countries: EMBASE, MEDLINE Epub (Ovid), Cochrane Library, Web of Science, and Google Scholar. All included studies were scored on quality, using the ErasmusAGE Quality Score or the consolidated criteria for reporting qualitative research. Main outcome measures were usability and effectiveness of mHealth lifestyle and medical health care support apps related to pregnancy. All studies were screened by 2 reviewers individually, and the guidelines of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement were followed. Results Our search identified 4204 titles and abstracts, of which 2487 original studies remained after removing duplicates. We performed full-text screening of 217 studies, of which 29 were included in our study. In total, 19 out of 29 studies reported on mHealth apps to adopt healthy lifestyles and 10 out of 29 studies to support medical care. The lifestyle apps evaluated in 19 studies reported on usability and effectiveness: 10 studies reported positive on acceptability, and 14

Comparative study of heuristic evaluation and usability testing methods.

Science.gov (United States)

Thyvalikakath, Thankam Paul; Monaco, Valerie; Thambuganipalle, Himabindu; Schleyer, Titus

2009-01-01

Usability methods, such as heuristic evaluation, cognitive walk-throughs and user testing, are increasingly used to evaluate and improve the design of clinical software applications. There is still some uncertainty, however, as to how those methods can be used to support the development process and evaluation in the most meaningful manner. In this study, we compared the results of a heuristic evaluation with those of formal user tests in order to determine which usability problems were detected by both methods. We conducted heuristic evaluation and usability testing on four major commercial dental computer-based patient records (CPRs), which together cover 80% of the market for chairside computer systems among general dentists. Both methods yielded strong evidence that the dental CPRs have significant usability problems. An average of 50% of empirically-determined usability problems were identified by the preceding heuristic evaluation. Some statements of heuristic violations were specific enough to precisely identify the actual usability problem that study participants encountered. Other violations were less specific, but still manifested themselves in usability problems and poor task outcomes. In this study, heuristic evaluation identified a significant portion of problems found during usability testing. While we make no assumptions about the generalizability of the results to other domains and software systems, heuristic evaluation may, under certain circumstances, be a useful tool to determine design problems early in the development cycle.

Enhancing usability using Near Field Communication for mobile application

Directory of Open Access Journals (Sweden)

Wihidayat Endar

2018-01-01

Full Text Available Near Field Communication (NFC as relatively new wireless communication technology pushes new challenges to application developers to make their applications easier to use and simpler to operate. This point of view known as usability element. Usability is one of the elements for creating good quality applications. This study aims to analyse the usability of mobile-based application embeds with NFC. We also try to evaluate usability in applications used by children. We developed an application called Receptionist which has a primary function as a communication tool between students, teachers and parents at a middle school. To know the impact of the NFC, the Receptionist input system is designed with two methods, via conventional navigation (using buttons and via NFC. To understand the usability of each method, we do user testing and questioners on students. The results show, using the NFC there is a significant increase in usability attributes: efficiency, effectiveness, and learnability. On the other hand, there is decreases of user satisfaction comparing to conventional method. In general, this study demonstrates the potential of new input device technologies that can improve the usability of mobile-based applications.

Effects of Aging and Domain Knowledge on Usability in Small Screen Devices for Diabetes Patients

Science.gov (United States)

Calero Valdez, André; Ziefle, Martina; Horstmann, Andreas; Herding, Daniel; Schroeder, Ulrik

Technology acceptance has become a key concept for the successful rollout of technical devices. Though the concept is intensively studied for nearly 20 years now, still, many open questions remain. This especially applies to technology acceptance of older users, which are known to be very sensitive to suboptimal interfaces and show considerable reservations towards the usage of new technology. Mobile small screen technology increasingly penetrates health care and medical applications. This study investigates impacts of aging, technology expertise and domain knowledge on user interaction using the example of diabetes. For this purpose user effectiveness and efficiency have been measured on a simulated small screen device and related to user characteristics, showing that age and technology expertise have a big impact on usability of the device. Furthermore, impacts of user characteristics and success during the trial on acceptance of the device were surveyed and analyzed.

A Survey of Usability Practices in Free/Libre/Open Source Software

Science.gov (United States)

Paul, Celeste Lyn

A review of case studies about usability in eight Free/Libre/Open Source Software (FLOSS) projects showed that an important issue regarding a usability initiative in the project was the lack of user research. User research is a key component in the user-centered design (UCD) process and a necessary step for creating usable products. Reasons why FLOSS projects suffered from a lack of user research included poor or unclear project leadership, cultural differences between developer and designers, and a lack of usability engineers. By identifying these critical issues, the FLOSS usability community can begin addressing problems in the efficacy of usability activities and work towards creating more usable FLOSS products.

Direct Cast U-6Nb – 2017 Progress on Cylindrical Castings

Energy Technology Data Exchange (ETDEWEB)

Aikin, Jr., Robert M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-10-04

This report describes work to further develop a sound technical basis and best practices for mold design and process parameters for the Direct Casting of U-6wt%Nb components. One major challenge to the production of U-6Nb components is the propensity for niobium segregation during casting and solidification. This is especially true for cylindrical castings where the vertical side walls allow flotation of Nb resulting in severe inverse macrosegregation. In this work, a small (120 mm diameter by 180 mm tall) and large cylinder (250 mm diameter by 310 mm tall) are examined with a focus on reducing, or eliminating, niobium segregation. It is demonstrated that counter gravity casting (top-to-bottom solidification) can be used to minimize segregation in the small cylinder. Attempts to counter gravity cast the large cylinder were unsuccessful, in large part due to size limitations of the current furnace. A path forward for casting of the large cylinders is discussed.

A Fuzzy method for the usability evaluation of nuclear medical equipment

Energy Technology Data Exchange (ETDEWEB)

Grecco, Cláudio H.S.; Santos, Isaac J.A.L.; Farias, Marcos S.; Farias, Larissa P.; Filho, Alfredo M.V., E-mail: grecco@ien.gov.br, E-mail: luquetti@ien.gov.br, E-mail: msantana@ien.gov.br, E-mail: larissapfarias@ymail.com, E-mail: marques@ien.gov.br [Instituto de Engenharia Nuclear (DENN/IEN/CNEN/RJ), Rio de Janeiro, RJ (Brazil). Departamento de Engenharia Nuclear

2017-11-01

To avoid errors when handling nuclear medical equipment, it is important to develop products with a high degree of usability. This can be achieved by performing usability evaluations in the product development process to detect and mitigate potential usability problems. Usability evaluation focuses on how well users can learn and use a product to achieve their goals. Thus, the usability evaluation has become recognized as a valuable complement to the established approaches to design good user interfaces, to reduce incidents and accidents as well the time required to learn how to use the equipment. To gather information about usability, practitioners use a variety of methods that gather feedback from users about an existing interface or plans related to a new interface. A wide range of usability evaluation methods have been proposed, but few methods focus on developing an objective and practical evaluation method for usability. Moreover, the usability evaluations are based on human judgments and most methods cannot fully solve the subjectivity of these evaluations. In order to remedy this deficiency, the purpose of this work is to adopt a Fuzzy Set Theory (FST) approach to establish a method for the usability evaluation of nuclear medical equipment based on usability heuristics for user interface design and international standards for ergonomics of human-system interaction. To exemplify the method we performed a usability evaluating of the Digital Spectrometer ESP 13004 by testing it with representative users. The results showed that the method is a proactive tool to provide a basis for checking usability of medical device interfaces. (author)

A Fuzzy method for the usability evaluation of nuclear medical equipment

International Nuclear Information System (INIS)

Grecco, Cláudio H.S.; Santos, Isaac J.A.L.; Farias, Marcos S.; Farias, Larissa P.; Filho, Alfredo M.V.

2017-01-01

To avoid errors when handling nuclear medical equipment, it is important to develop products with a high degree of usability. This can be achieved by performing usability evaluations in the product development process to detect and mitigate potential usability problems. Usability evaluation focuses on how well users can learn and use a product to achieve their goals. Thus, the usability evaluation has become recognized as a valuable complement to the established approaches to design good user interfaces, to reduce incidents and accidents as well the time required to learn how to use the equipment. To gather information about usability, practitioners use a variety of methods that gather feedback from users about an existing interface or plans related to a new interface. A wide range of usability evaluation methods have been proposed, but few methods focus on developing an objective and practical evaluation method for usability. Moreover, the usability evaluations are based on human judgments and most methods cannot fully solve the subjectivity of these evaluations. In order to remedy this deficiency, the purpose of this work is to adopt a Fuzzy Set Theory (FST) approach to establish a method for the usability evaluation of nuclear medical equipment based on usability heuristics for user interface design and international standards for ergonomics of human-system interaction. To exemplify the method we performed a usability evaluating of the Digital Spectrometer ESP 13004 by testing it with representative users. The results showed that the method is a proactive tool to provide a basis for checking usability of medical device interfaces. (author)

Usability/Sentiment for the Enterprise and ENTERPRISE

Science.gov (United States)

Meza, David; Berndt, Sarah

2014-01-01

The purpose of the Sentiment of Search Study for NASA Johnson Space Center (JSC) is to gain insight into the intranet search environment. With an initial usability survey, the authors were able to determine a usability score based on the Systems Usability Scale (SUS). Created in 1986, the freely available, well cited, SUS is commonly used to determine user perceptions of a system (in this case the intranet search environment). As with any improvement initiative, one must first examine and document the current reality of the situation. In this scenario, a method was needed to determine the usability of a search interface in addition to the user's perception on how well the search system was providing results. The use of the SUS provided a mechanism to quickly ascertain information in both areas, by adding one additional open-ended question at the end. The first ten questions allowed us to examine the usability of the system, while the last questions informed us on how the users rated the performance of the search results. The final analysis provides us with a better understanding of the current situation and areas to focus on for improvement. The power of search applications to enhance knowledge transfer is indisputable. The performance impact for any user unable to find needed information undermines project lifecycle, resource and scheduling requirements. Ever-increasing complexity of content and the user interface make usability considerations for the intranet, especially for search, a necessity instead of a 'nice-to-have'. Despite these arguments, intranet usability is largely disregarded due to lack of attention beyond the functionality of the infrastructure (White, 2013). The data collected from users of the JSC search system revealed their overall sentiment by means of the widely-known System Usability Scale. Results of the scores suggest 75%, +/-0.04, of the population rank the search system below average. In terms of a grading scaled, this equated to D or

Web-Based Cognitive Behavioral Relapse Prevention Program With Tailored Feedback for People With Methamphetamine and Other Drug Use Problems: Development and Usability Study.

Science.gov (United States)

Takano, Ayumi; Miyamoto, Yuki; Kawakami, Norito; Matsumoto, Toshihiko

2016-01-06

Although drug abuse has been a serious public health concern, there have been problems with implementation of treatment for drug users in Japan because of poor accessibility to treatment, concerns about stigma and confidentiality, and costs. Therapeutic interventions using the Internet and computer technologies could improve this situation and provide more feasible and acceptable approaches. The objective of the study was to show how we developed a pilot version of a new Web-based cognitive behavioral relapse prevention program with tailored feedback to assist people with drug problems and assessed its acceptance and usability. We developed the pilot program based on existing face-to-face relapse prevention approaches using an open source Web application to build an e-learning website, including relapse prevention sessions with videos, exercises, a diary function, and self-monitoring. When users submitted exercise answers and their diary, researchers provided them with personalized feedback comments using motivational interviewing skills. People diagnosed with drug dependence were recruited in this pilot study from a psychiatric outpatient ward and nonprofit rehabilitation facilities and usability was evaluated using Internet questionnaires. Overall, website usability was assessed by the Web Usability Scale. The adequacy of procedures in the program, ease of use, helpfulness of content, and adverse effects, for example, drug craving, mental distress, were assessed by original structured questionnaires and descriptive form questions. In total, 10 people participated in the study and completed the baseline assessment, 60% completed all relapse prevention sessions within the expected period. The time needed to complete one session was about 60 minutes and most of the participants took 2 days to complete the session. Overall website usability was good, with reasonable scores on subscales of the Web Usability Scale. The participants felt that the relapse prevention

Merits of usability testing for PACS selection

NARCIS (Netherlands)

Jorritsma, Wiard; Cnossen, Fokie; van Ooijen, Peter M. A.

Objectives: To compare the usability of different Picture Archiving and Communication System (PACS) workstations, determine whether a usability test has added value with respect to the traditional way of comparing PACSs based on functional requirements, and to evaluate the appropriateness of a

Cast iron - a predictable material

Directory of Open Access Journals (Sweden)

Jorg C. Sturm

2011-02-01

Full Text Available High strength compacted graphite iron (CGI or alloyed cast iron components are substituting previously used non-ferrous castings in automotive power train applications. The mechanical engineering industry has recognized the value in substituting forged or welded structures with stiff and light-weight cast iron castings. New products such as wind turbines have opened new markets for an entire suite of highly reliable ductile iron cast components. During the last 20 years, casting process simulation has developed from predicting hot spots and solidification to an integral assessment tool for foundries for the entire manufacturing route of castings. The support of the feeding related layout of the casting is still one of the most important duties for casting process simulation. Depending on the alloy poured, different feeding behaviors and self-feeding capabilities need to be considered to provide a defect free casting. Therefore, it is not enough to base the prediction of shrinkage defects solely on hot spots derived from temperature fields. To be able to quantitatively predict these defects, solidification simulation had to be combined with density and mass transport calculations, in order to evaluate the impact of the solidification morphology on the feeding behavior as well as to consider alloy dependent feeding ranges. For cast iron foundries, the use of casting process simulation has become an important instrument to predict the robustness and reliability of their processes, especially since the influence of alloying elements, melting practice and metallurgy need to be considered to quantify the special shrinkage and solidification behavior of cast iron. This allows the prediction of local structures, phases and ultimately the local mechanical properties of cast irons, to asses casting quality in the foundry but also to make use of this quantitative information during design of the casting. Casting quality issues related to thermally driven

Templates for Cross-Cultural and Culturally Specific Usability Testing

DEFF Research Database (Denmark)

Clemmensen, Torkil

2011-01-01

The cultural diversity of users of technology challenges our methods for usability testing. This article suggests templates for cross-culturally and culturally specific usability testing, based on studies of usability testing in companies in Mumbai, Beijing, and Copenhagen. Study 1 was a cross...... tests. The result was the construction of templates for usability testing. The culturally specific templates were in Mumbai “user-centered evaluation,” Copenhagen “client-centered evaluation,” and Beijing “evaluator-centered evaluation.” The findings are compared with related research...

A brain-computer interface based cognitive training system for healthy elderly: a randomized control pilot study for usability and preliminary efficacy.

Directory of Open Access Journals (Sweden)

Tih-Shih Lee

Full Text Available Cognitive decline in aging is a pressing issue associated with significant healthcare costs and deterioration in quality of life. Previously, we reported the successful use of a novel brain-computer interface (BCI training system in improving symptoms of attention deficit hyperactivity disorder. Here, we examine the feasibility of the BCI system with a new game that incorporates memory training in improving memory and attention in a pilot sample of healthy elderly. This study investigates the safety, usability and acceptability of our BCI system to elderly, and obtains an efficacy estimate to warrant a phase III trial. Thirty-one healthy elderly were randomized into intervention (n = 15 and waitlist control arms (n = 16. Intervention consisted of an 8-week training comprising 24 half-hour sessions. A usability and acceptability questionnaire was administered at the end of training. Safety was investigated by querying users about adverse events after every session. Efficacy of the system was measured by the change of total score from the Repeatable Battery for the Assessment of Neuropsychological Status (RBANS before and after training. Feedback on the usability and acceptability questionnaire was positive. No adverse events were reported for all participants across all sessions. Though the median difference in the RBANS change scores between arms was not statistically significant, an effect size of 0.6SD was obtained, which reflects potential clinical utility according to Simon's randomized phase II trial design. Pooled data from both arms also showed that the median change in total scores pre and post-training was statistically significant (Mdn = 4.0; p<0.001. Specifically, there were significant improvements in immediate memory (p = 0.038, visuospatial/constructional (p = 0.014, attention (p = 0.039, and delayed memory (p<0.001 scores. Our BCI-based system shows promise in improving memory and attention in healthy

Usability Metrics for Gamified E-learning Course: A Multilevel Approach

Directory of Open Access Journals (Sweden)

Aleksandra Sobodić

2018-04-01

Full Text Available This paper discusses the effect of a gamified learning system for students of the master course on Web Design and Programming performed at the Faculty of Organization and Informatics. A new set of usability metrics was derived from web-based learning usability, user experience and instructional design literature and incorporated into the questionnaire which consists of three main categories: Usability, Educational Usability and User Experience. The main contribution of this paper is the development and validation of a questionnaire for measuring the usability of a gamified e-learning course from students’ perspective. Usability practitioners can use the developed metrics with confidence when evaluating the design of a gamified e-learning course in order to improve students’ engagement and motivation.

Cultural Cognition in Usability Evaluation

DEFF Research Database (Denmark)

Clemmensen, Torkil; Hertzum, Morten; Hornbæk, Kasper Anders Søren

2009-01-01

We discuss the impact of cultural differences on usability evaluations that are based on the thinking-aloud method (TA). The term ‘cultural differences' helps distinguish differences in the perception and thinking of Westerners (people from Western Europe and US citizens with European origins...... and evaluator. In conclusion, we point to the importance of matching the task presentation to users' cultural background, the different effects of thinking aloud on task performance between Easterners and Westerners, the differences in nonverbal behaviour that affect usability problem detection, and, finally...

Cultural Cognition in Usability Evaluation

DEFF Research Database (Denmark)

Clemmensen, Torkil; Hertzum, Morten; Hornbæk, Kasper Anders Søren

2009-01-01

We discuss the impact of cultural differences on usability evaluations that are based on the thinking-aloud method (TA). The term ‘cultural differences’ helps distinguish differences in the perception and thinking of Westerners (people from Western Europe and US citizens with European origins...... and evaluator. In conclusion, we point to the importance of matching the task presentation to users’ cultural background, the different effects of thinking aloud on task performance between Easterners and Westerners, the differences in nonverbal behaviour that affect usability problem detection, and, finally...

Dimensional control of die castings

Science.gov (United States)

Karve, Aniruddha Ajit

The demand for net shape die castings, which require little or no machining, is steadily increasing. Stringent customer requirements are forcing die casters to deliver high quality castings in increasingly short lead times. Dimensional conformance to customer specifications is an inherent part of die casting quality. The dimensional attributes of a die casting are essentially dependent upon many factors--the quality of the die and the degree of control over the process variables being the two major sources of dimensional error in die castings. This study focused on investigating the nature and the causes of dimensional error in die castings. The two major components of dimensional error i.e., dimensional variability and die allowance were studied. The major effort of this study was to qualitatively and quantitatively study the effects of casting geometry and process variables on die casting dimensional variability and die allowance. This was accomplished by detailed dimensional data collection at production die casting sites. Robust feature characterization schemes were developed to describe complex casting geometry in quantitative terms. Empirical modeling was utilized to quantify the effects of the casting variables on dimensional variability and die allowance for die casting features. A number of casting geometry and process variables were found to affect dimensional variability in die castings. The dimensional variability was evaluated by comparisons with current published dimensional tolerance standards. The casting geometry was found to play a significant role in influencing the die allowance of the features measured. The predictive models developed for dimensional variability and die allowance were evaluated to test their effectiveness. Finally, the relative impact of all the components of dimensional error in die castings was put into perspective, and general guidelines for effective dimensional control in the die casting plant were laid out. The results of

Building a Remote Usability Testing Body of Knowledge (RUTBOK)

DEFF Research Database (Denmark)

Lizano, Fulvio; Stage, Jan

2012-01-01

Remote Usability Testing (RUT) is an alternative method of usability evaluations. The main aim of RUT is the reduction of costs in the usability evaluation process. Since middle of the 90s RUT, has emerged as a technique which seems as is gaining maturity across the time. In general any discipline...

The Usability Expert’s Fear of Agility

DEFF Research Database (Denmark)

Nielsen, Lene; Madsen, Sabine

2012-01-01

This paper contributes to the HCI literature on usability practice with insights about the empirical challenges and global emerging practices caused by the advent of agile software development (ASD). In the paper we report from a worldwide study involving 12 usability professionals from 12 differ...

Brief Report: Web-based Management of Adolescent Chronic Pain: Development and Usability Testing of an Online Family Cognitive Behavioral Therapy Program

Science.gov (United States)

Palermo, Tonya M.

2009-01-01

Objectives This study evaluates the usability and feasibility of a Web-based intervention (Web-MAP) to deliver cognitive behavioral therapy (CBT) to adolescents with chronic pain and their parents. Methods The Web site was evaluated in two stages. In stage one, recovered adolescents and parents (n = 5 dyads), who had completed office-based CBT through a pediatric pain management clinic, completed ratings of Web site content, usability, appearance, and theme. In stage two, treatment-seeking adolescents and their parents (n = 6 dyads) completed the full-length Web program. Program usage data were obtained to assess interaction with the Web site. Results Participants rated moderate to strong acceptability of the program. Usage data indicated that participants interacted with the site and used communication features. Conclusions Feedback from usability testing provided important information in the process of designing a feasible Web-based treatment for adolescents with chronic pain for use in a randomized controlled trial. PMID:18669578

A proposal for a repertory-grid study of differences in Chinese, Danish, and Indian conceptions of usability: Cultural usability?

DEFF Research Database (Denmark)

Hertzum, Morten

2006-01-01

This is an unrefined proposal for a study that could form part of the exploratory phase of the Cultural Usability project. The proposed study compares three cultures (Chinese, Danish, and Indian) and two stakeholder groups (users and developers) with respect to their conceptions of usability....

Adding SPICE to a Library Internet Site: A Recipe to Enhance Usability

Directory of Open Access Journals (Sweden)

Ingrid Tonnison

2006-03-01

Full Text Available Objective - To produce a highly- usable intranet site, use the project to explore the practical application of evidence-based librarianship (EBL, and refine the library's project management methodology. Methods - Evidence was gathered via a literature review, an online survey, scenario-based usability testing, and the completion of a usability checlist. Usability issues were then addressed, guided by the Research-Based Web Design and Usability Guidelines. Results - After a preliminary revision, the site achieved a usability index of 79% after application of the "Raward Library Usability Analysis Tool". Finding the information and supporting user tasks were identified as areas of weakness. Usability testing and cleint feedback supported these findings. After these issues were addressed by a major site redeveloment, the usability index increased to 98%. Conclusions - Raward's checklist is an easy and effective tool for measuring and identifying usability issues. Its value was enhanced by scenario-based usability testing, which yielded rich, client specific information. The application of EBL and project management princples ehnanced the outcomes of the project, and the professional development of the project team.

Power, Performance, and Perception (P3): Integrating Usability Metrics and Technology Acceptance Determinants to Validate a New Model for Predicting System Usage

Science.gov (United States)

1999-12-01

Ergonomie Requirements for Office Work with Visual Display Terminals: Part 11- Guidance on Usability (Smith, 1996:69-70). Measures of effectiveness...Wesley, 1998. Smith, Wanda, J. ISO and ANSI Ergonomie Standards for Computer Products. Upper Saddle River, NJ: Prentice Hall, 1996. Szajna, Bemadette

Defining Usability of PN Services

DEFF Research Database (Denmark)

Nicolajsen, Hanne Westh; Ahola, Titta; Fleury, Alexandre

In this deliverable usability and user experience are defined in relation to MAGNET Beyond technologies, and it is described how the main MAGNET Beyond concepts can be evaluated through the involvement of users. The concepts include the new "Activity based communication approach" for interacting...... with the MAGNET Beyond system, as well as the core concepts: Personal Network, Personal Network-Federation, Service Discovery, User Profile Management, Personal Network Management, Privacy and Security and Context Awareness. The overall plans for the final usability evaluation are documented based on the present...

Surface dosimetry for breast radiotherapy in the presence of immobilization cast material

International Nuclear Information System (INIS)

Kelly, Andrew; Hardcastle, Nicholas; Metcalfe, Peter; Cutajar, Dean; Quinn, Alexandra; Cardoso, Michael; Rosenfeld, Anatoly; Foo, Kerwyn; Barlin, Sheree

2011-01-01

Curative breast radiotherapy typically leaves patients with varying degrees of cosmetic damage. One problem interfering with cosmetically acceptable breast radiotherapy is the external contour for large pendulous breasts which often results in high doses to skin folds. Thermoplastic casts are often employed to secure the breasts to maintain setup reproducibility and limit the presence of skin folds. This paper aims to determine changes in surface dose that can be attributed to the use of thermoplastic immobilization casts. Skin dose for a clinical hybrid conformal/IMRT breast plan was measured using radiochromic film and MOSFET detectors at a range of water equivalent depths representative of the different skin layers. The radiochromic film was used as an integrating dosimeter, while the MOSFETs were used for real-time dosimetry to isolate the contribution of skin dose from individual IMRT segments. Strips of film were placed at various locations on the breast and the MOSFETs were used to measure skin dose at 16 positions spaced along the film strips for comparison of data. The results showed an increase in skin dose in the presence of the immobilization cast of up to 45.7% and 62.3% of the skin dose without the immobilization cast present as measured with Gafchromic EBT film and MOSFETs, respectively. The increase in skin dose due to the immobilization cast varied with the angle of beam incidence and was greatest when the beam was normally incident on the phantom. The increase in surface dose with the immobilization cast was greater under entrance dose conditions compared to exit dose conditions.

Surface dosimetry for breast radiotherapy in the presence of immobilization cast material

Science.gov (United States)

Kelly, Andrew; Hardcastle, Nicholas; Metcalfe, Peter; Cutajar, Dean; Quinn, Alexandra; Foo, Kerwyn; Cardoso, Michael; Barlin, Sheree; Rosenfeld, Anatoly

2011-02-01

Curative breast radiotherapy typically leaves patients with varying degrees of cosmetic damage. One problem interfering with cosmetically acceptable breast radiotherapy is the external contour for large pendulous breasts which often results in high doses to skin folds. Thermoplastic casts are often employed to secure the breasts to maintain setup reproducibility and limit the presence of skin folds. This paper aims to determine changes in surface dose that can be attributed to the use of thermoplastic immobilization casts. Skin dose for a clinical hybrid conformal/IMRT breast plan was measured using radiochromic film and MOSFET detectors at a range of water equivalent depths representative of the different skin layers. The radiochromic film was used as an integrating dosimeter, while the MOSFETs were used for real-time dosimetry to isolate the contribution of skin dose from individual IMRT segments. Strips of film were placed at various locations on the breast and the MOSFETs were used to measure skin dose at 16 positions spaced along the film strips for comparison of data. The results showed an increase in skin dose in the presence of the immobilization cast of up to 45.7% and 62.3% of the skin dose without the immobilization cast present as measured with Gafchromic EBT film and MOSFETs, respectively. The increase in skin dose due to the immobilization cast varied with the angle of beam incidence and was greatest when the beam was normally incident on the phantom. The increase in surface dose with the immobilization cast was greater under entrance dose conditions compared to exit dose conditions.

Revealing unawareness in usability related decision-making

NARCIS (Netherlands)

Harkema, C.L.E.

2012-01-01

Nowadays, many users experience usability issues with their electronic products. It does not work as they expect or otherwise irritates the user, so he becomes dissatisfied about the product and may even complain about it. Th ese numbers of complaints to companies and usability issues are high and

Dimensions for hearing-impaired mobile application usability model

Science.gov (United States)

Nathan, Shelena Soosay; Hussain, Azham; Hashim, Nor Laily; Omar, Mohd Adan

2017-10-01

This paper discuss on the dimensions that has been derived for the hearing-impaired mobile applications usability model. General usability model consist of general dimension for evaluating mobile application however requirements for the hearing-impaired are overlooked and often scanted. This led towards mobile application developed for the hearing-impaired are left unused. It is also apparent that these usability models do not consider accessibility dimensions according to the requirement of the special users. This complicates the work of usability practitioners as well as academician that practices research usability when application are developed for the specific user needs. To overcome this issue, dimension chosen for the hearing-impaired are ensured to be align with the real need of the hearing-impaired mobile application. Besides literature studies, requirements for the hearing-impaired mobile application have been identified through interview conducted with hearing-impaired mobile application users that were recorded as video outputs and analyzed using Nvivo. Finally total of 6 out of 15 dimensions gathered are chosen for the proposed model and presented.

Barefooted Usability Evaluation: Addressing the Mindset, Resources and Competences

OpenAIRE

Bruun , Anders

2011-01-01

Part 1: Long and Short Papers; International audience; Lack of usability specialists, high resource requirements and developer mindsets are three considerable barriers for introducing usability engineering into software companies. This Ph.D. project explores the effect of letting software developers and end users apply usability engineering methods instead of a specialist, a solution which may reduce the barriers.

Assessing Library Instruction through Web Usability and Vocabulary Studies

Science.gov (United States)

Castonguay, Remi

2008-01-01

Can we use the methods of Web usability testing to learn about library instruction? This article is among the first in the field trying to establish a link between usability and instruction. The author discusses useful insights that Web usability can bring to our pedagogy as well as to the efficiency of library instruction. The result of a Web…

User acceptance of location-tracking technologies in health research: Implications for study design and data quality.

Science.gov (United States)

Hardy, Jean; Veinot, Tiffany C; Yan, Xiang; Berrocal, Veronica J; Clarke, Philippa; Goodspeed, Robert; Gomez-Lopez, Iris N; Romero, Daniel; Vydiswaran, V G Vinod

2018-03-01

Research regarding place and health has undergone a revolution due to the availability of consumer-focused location-tracking devices that reveal fine-grained details of human mobility. Such research requires that participants accept such devices enough to use them in their daily lives. There is a need for a theoretically grounded understanding of acceptance of different location-tracking technology options, and its research implications. Guided by an extended Unified Theory of Acceptance and Use of Technology (UTAUT), we conducted a 28-day field study comparing 21 chronically ill people's acceptance of two leading, consumer-focused location-tracking technologies deployed for research purposes: (1) a location-enabled smartphone, and (2) a GPS watch/activity tracker. Participants used both, and completed two surveys and qualitative interviews. Findings revealed that all participants exerted effort to facilitate data capture, such as by incorporating devices into daily routines and developing workarounds to keep devices functioning. Nevertheless, the smartphone was perceived to be significantly easier and posed fewer usability challenges for participants than the watch. Older participants found the watch significantly more difficult to use. For both devices, effort expectancy was significantly associated with future willingness to participate in research although prosocial motivations overcame some concerns. Social influence, performance expectancy and use behavior were significantly associated with intentions to use the devices in participants' personal lives. Data gathered via the smartphone was significantly more complete than data gathered via the watch, primarily due to usability challenges. To make longer-term participation in location tracking research a reality, and to achieve complete data capture, researchers must minimize the effort involved in participation; this requires usable devices. For long-term location-tracking studies using similar devices

Compound cast product and method for producing a compound cast product

Science.gov (United States)

Meyer, Thomas N.; Viswanathan, Srinath

2002-09-17

A compound cast product is formed in a casting mold (14) having a mold cavity (16) sized and shaped to form the cast product. A plurality of injectors (24) is supported from a bottom side (26) of the casting mold (14). The injectors (24) are in fluid communication with the mold cavity (16) through the bottom side (26) of the casting mold (14). A molten material holder furnace (12) is located beneath the casting mold (14). The holder furnace (12) defines molten material receiving chambers (36) configured to separately contain supplies of two different molten materials (37, 38). The holder furnace (12) is positioned such that the injectors (24) extend downward into the receiving chamber (36). The receiving chamber (36) is separated into at least two different flow circuits (51, 52). A first molten material (37) is received in a first flow circuit (51), and a second molten material (38) is received into a second flow circuit (52). The first and second molten materials (37, 38) are injected into the mold cavity (16) by the injectors (24) acting against the force of gravity. The injectors (24) are positioned such that the first and second molten materials (37, 38) are injected into different areas of the mold cavity (16). The molten materials (37, 38) are allowed to solidify and the resulting compound cast product is removed from the mold cavity (16).

Cost-justifying usability an update for the internet age

CERN Document Server

Bias, Randolph G; Bias, Randolph G

2005-01-01

You just know that an improvement of the user interface will reap rewards, but how do you justify the expense and the labor and the time-guarantee a robust ROI!-ahead of time? How do you decide how much of an investment should be funded? And what is the best way to sell usability to others? In this completely revised and new edition, Randolph G. Bias (University of Texas at Austin, with 25 years' experience as a usability practitioner and manager) and Deborah J. Mayhew (internationally recognized usability consultant and author of two other seminal books including The Usability Enginee

On the Concepts of Usability and Reusability of Learning Objects

Directory of Open Access Journals (Sweden)

Miguel-Angel Sicilia

2003-10-01

Full Text Available “Reusable learning objects” oriented towards increasing their potential reusability are required to satisfy concerns about their granularity and their independence of concrete contexts of use. Such requirements also entail that the definition of learning object “usability,” and the techniques required to carry out their “usability evaluation” must be substantially different from those commonly used to characterize and evaluate the usability of conventional educational applications. In this article, a specific characterization of the concept of learning object usability is discussed, which places emphasis on “reusability,” the key property of learning objects residing in repositories. The concept of learning object reusability is described as the possibility and adequacy for the object to be usable in prospective educational settings, so that usability and reusability are considered two interrelated – and in many cases conflicting – properties of learning objects. Following the proposed characterization of two characteristics or properties of learning objects, a method to evaluate usability of specific learning objects will be presented.

Human Health Risk Assessment and Safety Threshold of Harmful Trace Elements in the Soil Environment of the Wulantuga Open-Cast Coal Mine

Directory of Open Access Journals (Sweden)

Jianli Jia

2015-11-01

Full Text Available In this study, soil samples were collected from a large-scale open-cast coal mine area in Inner Mongolia, China. Arsenic (As, cadmium (Cd, beryllium (Be and nickel (Ni in soil samples were detected using novel collision/reaction cell technology (CCT with inductively-coupled plasma mass spectrometry (ICP-MS; collectively ICP-CCT-MS after closed-vessel microwave digestion. Human health risk from As, Cd, Be and Ni was assessed via three exposure pathways—inhalation, skin contact and soil particle ingestion. The comprehensive carcinogenic risk from As in Wulantuga open-cast coal mine soil is 6.29–87.70-times the acceptable risk, and the highest total hazard quotient of As in soils in this area can reach 4.53-times acceptable risk levels. The carcinogenic risk and hazard quotient of Cd, Be and Ni are acceptable. The main exposure route of As from open-cast coal mine soils is soil particle ingestion, accounting for 76.64% of the total carcinogenic risk. Considering different control values for each exposure pathway, the minimum control value (1.59 mg/kg could be selected as the strict reference safety threshold for As in the soil environment of coal-chemical industry areas. However, acceptable levels of carcinogenic risk are not unanimous; thus, the safety threshold identified here, calculated under a 1.00 × 10−6 acceptable carcinogenic risk level, needs further consideration.

Waste Acceptance Testing of Secondary Waste Forms: Cast Stone, Ceramicrete and DuraLith

International Nuclear Information System (INIS)

Mattigod, Shas V.; Westsik, Joseph H.; Chung, Chul-Woo; Lindberg, Michael J.; Parker, Kent E.

2011-01-01

To support the selection of a waste form for the liquid secondary wastes from WTP, Washington River Protection Solutions has initiated secondary-waste-form testing work at Pacific Northwest National Laboratory (PNNL). In anticipation of a down-selection process for a waste form for the Solidification Treatment Unit to be added to the ETF, PNNL is conducting tests on four candidate waste forms to evaluate their ability to meet potential waste acceptance criteria for immobilized secondary wastes that would be placed in the IDF. All three waste forms demonstrated compressive strengths above the minimum 3.45 MPa (500 psi) set as a target for cement-based waste forms. Further, none of the waste forms showed any significant degradation in compressive strength after undergoing thermal cycling (30 cycles in a 10 day period) between -40 C and 60 C or water immersion for 90 days. The three leach test methods are intended to measure the diffusion rates of contaminants from the waste forms. Results are reported in terms of diffusion coefficients and a leachability index (LI) calculated based on the diffusion coefficients. A smaller diffusion coefficient and a larger LI are desired. The NRC, in its Waste Form Technical Position (NRC 1991), provides recommendations and guidance regarding methods to demonstrate waste stability for land disposal of radioactive waste. Included is a recommendation to conduct leach tests using the ANS 16.1 method. The resulting leachability index (LI) should be greater than 6.0. For Hanford secondary wastes, the LI > 6.0 criterion applies to sodium leached from the waste form. For technetium and iodine, higher targets of LI > 9 for Tc and LI > 11 for iodine have been set based on early waste-disposal risk and performance assessment analyses. The results of these three leach tests conducted for a total time between 11days (ASTM C1308) to 90 days (ANS 16.1) showed: (1) Technetium diffusivity: ANSI/ANS 16.1, ASTM C1308, and EPA 1315 tests indicated that

Waste Acceptance Testing of Secondary Waste Forms: Cast Stone, Ceramicrete and DuraLith

Energy Technology Data Exchange (ETDEWEB)

Mattigod, Shas V.; Westsik, Joseph H.; Chung, Chul-Woo; Lindberg, Michael J.; Parker, Kent E.

2011-08-12

To support the selection of a waste form for the liquid secondary wastes from WTP, Washington River Protection Solutions has initiated secondary-waste-form testing work at Pacific Northwest National Laboratory (PNNL). In anticipation of a down-selection process for a waste form for the Solidification Treatment Unit to be added to the ETF, PNNL is conducting tests on four candidate waste forms to evaluate their ability to meet potential waste acceptance criteria for immobilized secondary wastes that would be placed in the IDF. All three waste forms demonstrated compressive strengths above the minimum 3.45 MPa (500 psi) set as a target for cement-based waste forms. Further, none of the waste forms showed any significant degradation in compressive strength after undergoing thermal cycling (30 cycles in a 10 day period) between -40 C and 60 C or water immersion for 90 days. The three leach test methods are intended to measure the diffusion rates of contaminants from the waste forms. Results are reported in terms of diffusion coefficients and a leachability index (LI) calculated based on the diffusion coefficients. A smaller diffusion coefficient and a larger LI are desired. The NRC, in its Waste Form Technical Position (NRC 1991), provides recommendations and guidance regarding methods to demonstrate waste stability for land disposal of radioactive waste. Included is a recommendation to conduct leach tests using the ANS 16.1 method. The resulting leachability index (LI) should be greater than 6.0. For Hanford secondary wastes, the LI > 6.0 criterion applies to sodium leached from the waste form. For technetium and iodine, higher targets of LI > 9 for Tc and LI > 11 for iodine have been set based on early waste-disposal risk and performance assessment analyses. The results of these three leach tests conducted for a total time between 11days (ASTM C1308) to 90 days (ANS 16.1) showed: (1) Technetium diffusivity: ANSI/ANS 16.1, ASTM C1308, and EPA 1315 tests indicated that

Preliminary study of online machine translation use of nursing literature: quality evaluation and perceived usability

Directory of Open Access Journals (Sweden)

Anazawa Ryoko

2012-11-01

Full Text Available Abstract Background Japanese nurses are increasingly required to read published international research in clinical, educational, and research settings. Language barriers are a significant obstacle, and online machine translation (MT is a tool that can be used to address this issue. We examined the quality of Google Translate® (English to Japanese and Korean to Japanese, which is a representative online MT, using a previously verified evaluation method. We also examined the perceived usability and current use of online MT among Japanese nurses. Findings Randomly selected nursing abstracts were translated and then evaluated for intelligibility and usability by 28 participants, including assistants and research associates from nursing universities throughout Japan. They answered a questionnaire about their online MT use. From simple comparison of mean scores between two language pairs, translation quality was significantly better, with respect to both intelligibility and usability, for Korean-Japanese than for English-Japanese. Most respondents perceived a language barrier. Online MT had been used by 61% of the respondents and was perceived as not useful enough. Conclusion Nursing articles translated from Korean into Japanese by an online MT system could be read at an acceptable level of comprehension, but the same could not be said for English-Japanese translations. Respondents with experience using online MT used it largely to grasp the overall meanings of the original text. Enrichment in technical terms appeared to be the key to better usability. Users will be better able to use MT outputs if they improve their foreign language proficiency as much as possible. Further research is being conducted with a larger sample size and detailed analysis.

Applying usability heuristics to radiotherapy systems

International Nuclear Information System (INIS)

Chan, Alvita J.; Islam, Mohammad K.; Rosewall, Tara; Jaffray, David A.; Easty, Anthony C.; Cafazzo, Joseph A.

2012-01-01

Background and purpose: Heuristic evaluations have been used to evaluate safety of medical devices by identifying and assessing usability issues. Since radiotherapy treatment delivery systems often consist of multiple complex user-interfaces, a heuristic evaluation was conducted to assess the potential safety issues of such a system. Material and methods: A heuristic evaluation was conducted to evaluate the treatment delivery system at Princess Margaret Hospital (Toronto, Canada). Two independent evaluators identified usability issues with the user-interfaces and rated the severity of each issue. Results: The evaluators identified 75 usability issues in total. Eighteen of them were rated as high severity, indicating the potential to have a major impact on patient safety. A majority of issues were found on the record and verify system, and many were associated with the patient setup process. While the hospital has processes in place to ensure patient safety, recommendations were developed to further mitigate the risks of potential consequences. Conclusions: Heuristic evaluation is an efficient and inexpensive method that can be successfully applied to radiotherapy delivery systems to identify usability issues and improve patient safety. Although this study was conducted only at one site, the findings may have broad implications for the design of these systems.

Development and utilization of USGS ShakeCast for rapid post-earthquake assessment of critical facilities and infrastructure

Science.gov (United States)

Wald, David J.; Lin, Kuo-wan; Kircher, C.A.; Jaiswal, Kishor; Luco, Nicolas; Turner, L.; Slosky, Daniel

2017-01-01

The ShakeCast system is an openly available, near real-time post-earthquake information management system. ShakeCast is widely used by public and private emergency planners and responders, lifeline utility operators and transportation engineers to automatically receive and process ShakeMap products for situational awareness, inspection priority, or damage assessment of their own infrastructure or building portfolios. The success of ShakeCast to date and its broad, critical-user base mandates improved software usability and functionality, including improved engineering-based damage and loss functions. In order to make the software more accessible to novice users—while still utilizing advanced users’ technical and engineering background—we have developed a “ShakeCast Workbook”, a well documented, Excel spreadsheet-based user interface that allows users to input notification and inventory data and export XML files requisite for operating the ShakeCast system. Users will be able to select structure based on a minimum set of user-specified facility (building location, size, height, use, construction age, etc.). “Expert” users will be able to import user-modified structural response properties into facility inventory associated with the HAZUS Advanced Engineering Building Modules (AEBM). The goal of the ShakeCast system is to provide simplified real-time potential impact and inspection metrics (i.e., green, yellow, orange and red priority ratings) to allow users to institute customized earthquake response protocols. Previously, fragilities were approximated using individual ShakeMap intensity measures (IMs, specifically PGA and 0.3 and 1s spectral accelerations) for each facility but we are now performing capacity-spectrum damage state calculations using a more robust characterization of spectral deamnd.We are also developing methods for the direct import of ShakeMap’s multi-period spectra in lieu of the assumed three-domain design spectrum (at 0.3s for

Qualitative review of usability problems in health information systems for radiology.

Science.gov (United States)

Dias, Camila Rodrigues; Pereira, Marluce Rodrigues; Freire, André Pimenta

2017-12-01

Radiology processes are commonly supported by Radiology Information System (RIS), Picture Archiving and Communication System (PACS) and other software for radiology. However, these information technologies can present usability problems that affect the performance of radiologists and physicians, especially considering the complexity of the tasks involved. The purpose of this study was to extract, classify and analyze qualitatively the usability problems in PACS, RIS and other software for radiology. A systematic review was performed to extract usability problems reported in empirical usability studies in the literature. The usability problems were categorized as violations of Nielsen and Molich's usability heuristics. The qualitative analysis indicated the causes and the effects of the identified usability problems. From the 431 papers initially identified, 10 met the study criteria. The analysis of the papers identified 90 instances of usability problems, classified into categories corresponding to established usability heuristics. The five heuristics with the highest number of instances of usability problems were "Flexibility and efficiency of use", "Consistency and standards", "Match between system and the real world", "Recognition rather than recall" and "Help and documentation", respectively. These problems can make the interaction time consuming, causing delays in tasks, dissatisfaction, frustration, preventing users from enjoying all the benefits and functionalities of the system, as well as leading to more errors and difficulties in carrying out clinical analyses. Furthermore, the present paper showed a lack of studies performed on systems for radiology, especially usability evaluations using formal methods of evaluation involving the final users. Copyright © 2017 Elsevier Inc. All rights reserved.

Accuracy of three-dimensional cone beam computed tomography digital model measurements compared with plaster study casts

Directory of Open Access Journals (Sweden)

Shuaib Al Ali

2017-01-01

Full Text Available Purpose: The purpose of this study was to assess the accuracy of three-dimensional (3D cone beam computed tomography (CBCT study casts by comparing with direct measurements taken from plaster study casts. Materials and Methods: The dental arches of 30 patient subjects were imaged with a Kodak 9300 3D CBCT devise; Anatomodels were created and in vivo 5 imaging software was used to measure 10 dental arch variables which were compared to measurements of plaster study casts. Results: Three of the 10 variables, i.e., overbite, maxillary intermolar width, and arch length, were found significantly smaller (P < 0.05 using the Anatomodels following nonparametric Wilcoxon signed-rank testing. None of the differences found in the study averaged <0.5 mm. Conclusions: 3D CBCT imaging provided clinically acceptable accuracy for dental arch analysis. 3D CBCT imaging tended to underestimate the actual measurement compared to plaster study casts.

Integrating usability testing and think-aloud protocol analysis with "near-live" clinical simulations in evaluating clinical decision support.

Science.gov (United States)

Li, Alice C; Kannry, Joseph L; Kushniruk, Andre; Chrimes, Dillon; McGinn, Thomas G; Edonyabo, Daniel; Mann, Devin M

2012-11-01

Usability evaluations can improve the usability and workflow integration of clinical decision support (CDS). Traditional usability testing using scripted scenarios with think-aloud protocol analysis provide a useful but incomplete assessment of how new CDS tools interact with users and clinical workflow. "Near-live" clinical simulations are a newer usability evaluation tool that more closely mimics clinical workflow and that allows for a complementary evaluation of CDS usability as well as impact on workflow. This study employed two phases of testing a new CDS tool that embedded clinical prediction rules (an evidence-based medicine tool) into primary care workflow within a commercial electronic health record. Phase I applied usability testing involving "think-aloud" protocol analysis of 8 primary care providers encountering several scripted clinical scenarios. Phase II used "near-live" clinical simulations of 8 providers interacting with video clips of standardized trained patient actors enacting the clinical scenario. In both phases, all sessions were audiotaped and had screen-capture software activated for onscreen recordings. Transcripts were coded using qualitative analysis methods. In Phase I, the impact of the CDS on navigation and workflow were associated with the largest volume of negative comments (accounting for over 90% of user raised issues) while the overall usability and the content of the CDS were associated with the most positive comments. However, usability had a positive-to-negative comment ratio of only 0.93 reflecting mixed perceptions about the usability of the CDS. In Phase II, the duration of encounters with simulated patients was approximately 12 min with 71% of the clinical prediction rules being activated after half of the visit had already elapsed. Upon activation, providers accepted the CDS tool pathway 82% of times offered and completed all of its elements in 53% of all simulation cases. Only 12.2% of encounter time was spent using the

Accuracy of single-abutment digital cast obtained using intraoral and cast scanners.

Science.gov (United States)

Lee, Jae-Jun; Jeong, Ii-Do; Park, Jin-Young; Jeon, Jin-Hun; Kim, Ji-Hwan; Kim, Woong-Chul

2017-02-01

Scanners are frequently used in the fabrication of dental prostheses. However, the accuracy of these scanners is variable, and little information is available. The purpose of this in vitro study was to compare the accuracy of cast scanners with that of intraoral scanners by using different image impression techniques. A poly(methyl methacrylate) master model was fabricated to replicate a maxillary first molar single-abutment tooth model. The master model was scanned with an accurate engineering scanner to obtain a true value (n=1) and with 2 intraoral scanners (CEREC Bluecam and CEREC Omnicam; n=6 each). The cast scanner scanned the master model and duplicated the dental stone cast from the master model (n=6). The trueness and precision of the data were measured using a 3-dimensional analysis program. The Kruskal-Wallis test was used to compare the different sets of scanning data, followed by a post hoc Mann-Whitney U test with a significance level modified by Bonferroni correction (α/6=.0083). The type 1 error level (α) was set at .05. The trueness value (root mean square: mean ±standard deviation) was 17.5 ±1.8 μm for the Bluecam, 13.8 ±1.4 μm for the Omnicam, 17.4 ±1.7 μm for cast scanner 1, and 12.3 ±0.1 μm for cast scanner 2. The differences between the Bluecam and the cast scanner 1 and between the Omnicam and the cast scanner 2 were not statistically significant (P>.0083), but a statistically significant difference was found between all the other pairs (POmnicam, 9.2 ±1.2 μm for cast scanner 1, and 6.9 ±2.6 μm for cast scanner 2. The differences between Bluecam and Omnicam and between Omnicam and cast scanner 1 were not statistically significant (P>.0083), but there was a statistically significant difference between all the other pairs (POmnicam in video image impression had better trueness than a cast scanner but with a similar level of precision. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by

Usability Testing of Two Ambulatory EHR Navigators.

Science.gov (United States)

Hultman, Gretchen; Marquard, Jenna; Arsoniadis, Elliot; Mink, Pamela; Rizvi, Rubina; Ramer, Tim; Khairat, Saif; Fickau, Keri; Melton, Genevieve B

2016-01-01

Despite widespread electronic health record (EHR) adoption, poor EHR system usability continues to be a significant barrier to effective system use for end users. One key to addressing usability problems is to employ user testing and user-centered design. To understand if redesigning an EHR-based navigation tool with clinician input improved user performance and satisfaction. A usability evaluation was conducted to compare two versions of a redesigned ambulatory navigator. Participants completed tasks for five patient cases using the navigators, while employing a think-aloud protocol. The tasks were based on Meaningful Use (MU) requirements. The version of navigator did not affect perceived workload, and time to complete tasks was longer in the redesigned navigator. A relatively small portion of navigator content was used to complete the MU-related tasks, though navigation patterns were highly variable across participants for both navigators. Preferences for EHR navigation structures appeared to be individualized. This study demonstrates the importance of EHR usability assessments to evaluate group and individual performance of different interfaces and preferences for each design.

Supplemental Immobilization of Hanford Low-Activity Waste: Cast Stone Augmented Formulation Matrix Tests

International Nuclear Information System (INIS)

Cozzi, A.; Crawford, C.; Fox, K.; Hansen, E.; Roberts, K.

2015-01-01

More than 56 million gallons of radioactive and hazardous waste are stored in 177 underground storage tanks at the U.S. Department of Energy's (DOE's) Hanford Site in Washington State. The HLW will be vitrified in the HLW facility for ultimate disposal at an offsite federal repository. A portion (~35%) of the LAW will be vitrified in the LAW vitrification facility for disposal onsite at the Integrated Disposal Facility (IDF). The pretreatment and HLW vitrification facilities will have the capacity to treat and immobilize all of the wastes destined for those facilities. However, a second facility will be needed for the expected volume of LAW requiring immobilization. Cast Stone, a cementitious waste form, is being considered to provide the required additional LAW immobilization capacity. The Cast Stone waste form must be acceptable for disposal in the IDF. The Cast Stone waste form and immobilization process must be tested to demonstrate that the final Cast Stone waste form can comply with the waste acceptance criteria for the disposal facility and that the immobilization processes can be controlled to consistently provide an acceptable waste form product. A testing program was developed in fiscal year (FY) 2012 describing in detail the work needed to develop and qualify Cast Stone as a waste form for the solidification of Hanford LAW. A statistically designed test matrix was used to evaluate the effects of key parameters on the properties of the Cast Stone as it is initially prepared and after curing. For the processing properties, the water-to-dry-blend mix ratio was the most significant parameter in affecting the range of values observed for each property. The single shell tank (SST) Blend simulant also showed differences in measured properties compared to the other three simulants tested. A review of the testing matrix and results indicated that an additional set of tests would be beneficial to improve the understanding of the impacts noted in the

Supplemental Immobilization of Hanford Low-Activity Waste: Cast Stone Augmented Formulation Matrix Tests

Energy Technology Data Exchange (ETDEWEB)

Cozzi, A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Crawford, C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Fox, K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hansen, E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Roberts, K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2015-07-20

More than 56 million gallons of radioactive and hazardous waste are stored in 177 underground storage tanks at the U.S. Department of Energy’s (DOE’s) Hanford Site in Washington State. The HLW will be vitrified in the HLW facility for ultimate disposal at an offsite federal repository. A portion (~35%) of the LAW will be vitrified in the LAW vitrification facility for disposal onsite at the Integrated Disposal Facility (IDF). The pretreatment and HLW vitrification facilities will have the capacity to treat and immobilize all of the wastes destined for those facilities. However, a second facility will be needed for the expected volume of LAW requiring immobilization. Cast Stone, a cementitious waste form, is being considered to provide the required additional LAW immobilization capacity. The Cast Stone waste form must be acceptable for disposal in the IDF. The Cast Stone waste form and immobilization process must be tested to demonstrate that the final Cast Stone waste form can comply with the waste acceptance criteria for the disposal facility and that the immobilization processes can be controlled to consistently provide an acceptable waste form product. A testing program was developed in fiscal year (FY) 2012 describing in detail the work needed to develop and qualify Cast Stone as a waste form for the solidification of Hanford LAW. A statistically designed test matrix was used to evaluate the effects of key parameters on the properties of the Cast Stone as it is initially prepared and after curing. For the processing properties, the water-to-dry-blend mix ratio was the most significant parameter in affecting the range of values observed for each property. The single shell tank (SST) Blend simulant also showed differences in measured properties compared to the other three simulants tested. A review of the testing matrix and results indicated that an additional set of tests would be beneficial to improve the understanding of the impacts noted in the Screening

An approach for the fatigue estimation of porous cast iron based on non-destructive testing results

Directory of Open Access Journals (Sweden)

Heinrietz André

2014-06-01

Full Text Available Big cast iron components made of spheroidal cast iron allow constructing big structures such as stone mills, engine blocks or wind mills with acceptable expenses. Thus, in economically optimized cast processes pores cannot be always prevented in thick walled cast iron components and these components are often rejected because of safety reasons. On the one hand the fatigue performance of high loadable spheroidal cast iron components is reduced significantly by the presence of local porosities which has been pointed out in the past. On the other hand concepts for the fatigue estimation based on fracture mechanics which take the size and localization of the defect into account can lead to erroneous estimations because the defect is modelled as a crack. The challenge of an estimation method is to derive a fatigue life without the necessity to perform component tests. In the contribution an estimation method is presented which is able to determine the fatigue strength of a material volume taking the pores into account. The method can be applied based on data from computer tomographic X-ray (CT or Sampling Phased Array (SPA ultrasonic analyses. The method is presented for three spheroidal cast iron types: ferritic GJS-400-18, ferritic GJS-450-15 with high silicon content and perlitic GJS-700-3.

Feedback from Usability Evaluation to User Interface Design

DEFF Research Database (Denmark)

Nielsen, C. M.; Overgaard, M.; Pedersen, M. B.

2005-01-01

This paper reports from an exploratory study of means for providing feedback from a usability evaluation to the user interface designers. In this study, we conducted a usability evaluation of a mobile system that is used by craftsmen to register use of time and materials. The results...... and weaknesses of the system. The findings indicate that detailed descriptions of problems and log descriptions of the user's interaction with the system and of system interaction are useful for the designers when trying to understand the usability problems that the users have encountered....

Clean Metal Casting

Energy Technology Data Exchange (ETDEWEB)

Makhlouf M. Makhlouf; Diran Apelian

2002-02-05

The objective of this project is to develop a technology for clean metal processing that is capable of consistently providing a metal cleanliness level that is fit for a given application. The program has five tasks: Development of melt cleanliness assessment technology, development of melt contamination avoidance technology, development of high temperature phase separation technology, establishment of a correlation between the level of melt cleanliness and as cast mechanical properties, and transfer of technology to the industrial sector. Within the context of the first task, WPI has developed a standardized Reduced Pressure Test that has been endorsed by AFS as a recommended practice. In addition, within the context of task1, WPI has developed a melt cleanliness sensor based on the principles of electromagnetic separation. An industrial partner is commercializing the sensor. Within the context of the second task, WPI has developed environmentally friendly fluxes that do not contain fluorine. Within the context of the third task, WPI modeled the process of rotary degassing and verified the model predictions with experimental data. This model may be used to optimize the performance of industrial rotary degassers. Within the context of the fourth task, WPI has correlated the level of melt cleanliness at various foundries, including a sand casting foundry, a permanent mold casting foundry, and a die casting foundry, to the casting process and the resultant mechanical properties. This is useful in tailoring the melt cleansing operations at foundries to the particular casting process and the desired properties of cast components.

User’s Emotions and Usability Study of a Brain-Computer Interface Applied to People with Cerebral Palsy

Directory of Open Access Journals (Sweden)

Alejandro Rafael García Ramírez

2018-02-01

Full Text Available People with motor and communication disorders face serious challenges in interacting with computers. To enhance this functionality, new human-computer interfaces are being studied. In this work, a brain-computer interface based on the Emotiv Epoc is used to analyze human-computer interactions in cases of cerebral palsy. The Phrase-Composer software was developed to interact with the brain-computer interface. A system usability evaluation was carried out with the participation of three specialists from The Fundação Catarinense de Educação especial (FCEE and four cerebral palsy volunteers. Even though the System Usability Scale (SUS score was acceptable, several challenges remain. Raw electroencephalography (EEG data were also analyzed in order to assess the user’s emotions during their interaction with the communication device. This study brings new evidences about human-computer interaction related to individuals with cerebral palsy.

Usability engineering: domain analysis activities for augmented-reality systems

Science.gov (United States)

Gabbard, Joseph; Swan, J. E., II; Hix, Deborah; Lanzagorta, Marco O.; Livingston, Mark; Brown, Dennis B.; Julier, Simon J.

2002-05-01

This paper discusses our usability engineering process for the Battlefield Augmented Reality System (BARS). Usability engineering is a structured, iterative, stepwise development process. Like the related disciplines of software and systems engineering, usability engineering is a combination of management principals and techniques, formal and semi- formal evaluation techniques, and computerized tools. BARS is an outdoor augmented reality system that displays heads- up battlefield intelligence information to a dismounted warrior. The paper discusses our general usability engineering process. We originally developed the process in the context of virtual reality applications, but in this work we are adapting the procedures to an augmented reality system. The focus of this paper is our work on domain analysis, the first activity of the usability engineering process. We describe our plans for and our progress to date on our domain analysis for BARS. We give results in terms of a specific urban battlefield use case we have designed.

Business-Intelligence-Systeme im Spannungsfeld zwischen Usability und Sicherheit

OpenAIRE

Hinck, Thorsten

2010-01-01

Business-Intelligence-Systeme stehen im Spannungsfeld zwischen Usability und Sicherheit. Die Gefahren und Sicherheitsmaßnahmen für Informationssysteme werden ermittelt und ökonomisch in Bezug zur Gebrauchstauglichkeit gesetzt. Es entsteht ein Sicherheitsprofil für Business-Intelligence-Systeme. Business-Intelligence-Systems are in tension between Usability and IT-Security. Risks and safety measures of informationsystems are defined and set in (economic) regard to Usability. A security prof...

FAKTOR PENENTU MINAT PENGGUNAAN INSTAGRAM UNTUK PEMBELIAN ONLINE MENGGUNAKAN TECHNOLOGY ACCEPTANCE MODEL (TAM DAN THEORY OF PLANNED BEHAVIOR (TPB

Directory of Open Access Journals (Sweden)

Bayu Indrayana

2016-05-01

Full Text Available The objective of this research is to examine the factors that determine the interest in using Instagram in making online purchases. This study also analyzes the pattern of attitude relationship, subjective norms, behavioral control, and uses on interest in using Instagram for online purchases. In addition, the purpose of the research is to analyze whether there are contributions of usability and convenience toward the attitudes and easiness in using the Instagram toward the usage. Data analysis tool used is the structural equation modeling (SEM which is based technology acceptance model (TAM and theory of planned behavior (TPB. The results showed that subjective norms significantly influence the interest in using Instagram for online purchases; however, behavior control factors, usability and attitude are not significantly influential. Attitude is a factor that has the greatest influence among other factors. Instagram users from companies/businesses that intend to make use of Instagram as their digital marketing media need to pay attention to aspects of attitudes, subjective norms, behavioral control and usability.Key words: model of technology acceptance, consumer behavior, Structural Equation Modelling (SEM, social media

Caste System

OpenAIRE

Hoff, Karla

2016-01-01

In standard economics, individuals are rational actors and economic forces undermine institutions that impose large inefficiencies. The persistence of the caste system is evidence of the need for psychologically more realistic models of decision-making in economics. The caste system divides South Asian society into hereditary groups whose lowest ranks are represented as innately polluted. ...

SLIP CASTING METHOD

Science.gov (United States)

Allison, A.G.

1959-09-01

S>A process is described for preparing a magnesium oxide slip casting slurry which when used in conjunction with standard casting techniques results in a very strong "green" slip casting and a fired piece of very close dimensional tolerance. The process involves aging an aqueous magnestum oxide slurry, having a basic pH value, until it attains a specified critical viscosity at which time a deflocculating agent is added without upsetting the basic pH value.

Can eye tracking boost usability evaluation of computer games?

DEFF Research Database (Denmark)

Johansen, Sune Alstrup; Noergaard, Mie; Soerensen, Janus Rau

2008-01-01

Good computer games need to be challenging while at the same time being easy to use. Accordingly, besides struggling with well known challenges for usability work, such as persuasiveness, the computer game industry also faces system-specific challenges, such as identifying methods that can provide...... data on players' attention during a game. This position paper discusses how eye tracking may address three core challenges faced by computer game producer IO Interactive in their on-going work to ensure games that are fun, usable, and challenging. These challenges are: (1) Persuading game designers...... about the relevance of usability results, (2) involving game designers in usability work, and (3) identifying methods that provide new data about user behaviour and experience....

Post-deployment usability evaluation of a radiology workstation

NARCIS (Netherlands)

Jorritsma, Wiard; Cnossen, Fokie; Dierckx, Rudi A.; Oudkerk, Matthijs; Van Ooijen, Peter M. A.

Objectives: To determine the number, nature and severity of usability issues radiologists encounter while using a commercially available radiology workstation in clinical practice, and to assess how well the results of a pre-deployment usability evaluation of this workstation generalize to clinical

How to Reach Evidence-Based Usability Evaluation Methods

NARCIS (Netherlands)

Marcilly, Romaric; Peute, Linda

2017-01-01

This paper discusses how and why to build evidence-based knowledge on usability evaluation methods. At each step of building evidence, requisites and difficulties to achieve it are highlighted. Specifically, the paper presents how usability evaluation studies should be designed to allow capitalizing

Gating Systems for Sizeable Castings from Al Alloys Cast into Ceramic Moulds

Directory of Open Access Journals (Sweden)

I. Stachovec

2012-04-01

Full Text Available In contrast to casting to conventional non-reusable “sand” moulds, for which calculating technique for an optimum design of the gating system is comparatively well-developed, a trial-and-error method is applied mostly for casting to ceramic shell moulds made by the investment casting technology. A technologist selects from gating systems of several types (that are standardized by the foundry mostly on the basis of experience. However, this approach is not sustainable with ever growing demands on quality of castings and also the economy of their fabrication as well as with new types of complex sizeable castings introduced to the production gradually (by new customers from the aircraft industry above all any more. The simulation software may be used as a possible tool for making the process of optimising gating systems more effective.

Web usability testing with a Hispanic medically underserved population.

Science.gov (United States)

Moore, Mary; Bias, Randolph G; Prentice, Katherine; Fletcher, Robin; Vaughn, Terry

2009-04-01

Skilled website developers value usability testing to assure user needs are met. When the target audience differs substantially from the developers, it becomes essential to tailor both design and evaluation methods. In this study, researchers carried out a multifaceted usability evaluation of a website (Healthy Texas) designed for Hispanic audiences with lower computer literacy and lower health literacy. METHODS INCLUDED: (1) heuristic evaluation by a usability engineer, (2) remote end-user testing using WebEx software; and (3) face-to-face testing in a community center where use of the website was likely. Researchers found standard usability testing methods needed to be modified to provide interpreters, increased flexibility for time on task, presence of a trusted intermediary such as a librarian, and accommodation for family members who accompanied participants. Participants offered recommendations for website redesign, including simplified language, engaging and relevant graphics, culturally relevant examples, and clear navigation. User-centered design is especially important when website developers are not representative of the target audience. Failure to conduct appropriate usability testing with a representative audience can substantially reduce use and value of the website. This thorough course of usability testing identified improvements that benefit all users but become crucial when trying to reach an underserved audience.

Diffusion of C and Cr During Creation of Surface Layer on Cast Steel Casting

Directory of Open Access Journals (Sweden)

Szajnar J.

2014-10-01

Full Text Available In paper a method of improvement in utility properties of unalloyed cast steel casting in result of diffusion of C and Cr in process of creation of surface layer is presented. The aim of paper was determination of diffusion range of basic elements of alloyed surface layer. Moreover a quantitative analysis of carbides phase strengthens alloyed surface layer of casting was carried out. The results of studies shown that important factors of surface layer creation are maximal temperature Tmax on granular insert – cast steel boundary dependent of pouring temperature, granularity Zw of Fe-Cr-C alloy insert and thickness of casting wall gśo. On the basis of obtained results was affirmed that with increase of thickness of casting wall increases range of diffusion in solid state in Fe-Cr-C grains and in liquid state. Moreover the range of Tmax = 13001500oC favours creation of the proper alloyed surface layers on cast steel.

Clinical comparison of the (polymacon) spin-cast hydrogel contact lens to the (polymacon) lathe-cut hydrogel lenses.

Science.gov (United States)

Hill, J F

1980-08-01

The purpose of this study was to compare the clinical acceptability of polymacon spin-cast to polymacon lathe-cut hydrophilic contact lenses. Ten patients successfully wearing polymacon spin-cast lenses were studied. Each patient had one eye refitted with polymacon lathe-cut lenses. Comparison of the two types of lenses was then made. Objective evaluation included centration, movement, visual acuity, and over-refraction. Subjective criteria were based on patient comfort and stability and quality of vision. Results indicate that lathe-cut lenses can be just as clinically satisfactory as the spincast ones.

Tablet-Based Well-Being Check for the Elderly: Development and Evaluation of Usability and Acceptability.

Science.gov (United States)

Ray, Pradeep; Li, Junhua; Ariani, Arni; Kapadia, Vasvi

2017-05-12

Many elderly people prefer to live at home independently. One of the major concerns raised by the family members is the safety and well-being of their elderly family members when living independently in a home environment. To address this issue, assistive technology solutions have been available in the market. Despite their availability and proliferation, these types of solutions are not popular with the elderly due to their intrusive nature, privacy-related issues, social stigma, and fear of losing human interaction. This study shares the experience in the development of a digital photo frame system that helps family members to check the well-being of the elderly, exploiting their desire to remain socially connected. The aim of this study was to iteratively design, implement, and assess the usability, user friendliness, and acceptability of a tablet-based system to check the well-being of the elderly. Our study methodology comprises three separate stages: initial system development, contextual assessment, and comparative case study evaluation. In the first stage, requirements were elicited from the elderly to design a well-being check prototype. In the second stage, areas for improvements (eg, privacy features) were identified. Also, additional features (such as medication prompts or food reminders) were suggested to help aged and health care service providers with effective but subtle monitoring of the elderly. These would lower their operating cost by reducing visits by care providers to the homes of the elderly. In the third stage, the results highlighted the difference (between users in India and Australia) in the levels of familiarity of the elderly with this technology. Some elderly participants at the Kalyani Institute for Study, Planning and Action for Rural Change, India latched onto this technology quickly while a few refused to use the system. However, in all cases, the support of family members was crucial for their willingness to use the technology

Usability Assessment of International Office Website of Diponegoro University With Scenario Based Usability Evaluation Method and Wammi Method

OpenAIRE

Ratna Purwaningsih; Ikhsan Yenifi

2015-01-01

Website development needs to pay attention to usability aspect which consist of four factors: efficiency, effectiveness, satisfactions and error rate. The website of International Office of Diponegoro University provides academic information for Indonesian students and foreign students. The website still has some problem, especially on searching certain information. This research aims to evaluate the design of the existing website and measures the usability. A well-designed website will help ...

Multiscale modeling for the prediction of casting defects in investment cast aluminum alloys

International Nuclear Information System (INIS)

Hamilton, R.W.; See, D.; Butler, S.; Lee, P.D.

2003-01-01

Macroscopic modeling of heat transfer and fluid flow is now routinely used for the prediction of macroscopic defects in castings, while microscopic models are used to investigate the effects of alloy changes on typical microstructures. By combining these two levels of modeling it is possible to simulate the casting process over a wider range of spatial and temporal scales. This paper presents a multiscale model where micromodels for dendrite arm spacing and microporosity are incorporated into a macromodel of heat transfer and in order to predict the as cast microstructure and prevalence of microscopic defects, specifically porosity. The approach is applied to aluminum alloy (L169) investment castings. The models are compared with results obtained by optical image analysis of prepared slices, and X-ray tomography of volume samples from the experiments. Multiscale modeling is shown to provide the designer with a useful tool to improve the properties of the final casting by testing how altering the casting process affects the final microstructure including porosity

Post-deployment usability evaluation of a radiology workstation

NARCIS (Netherlands)

Jorritsma, Wiard; Cnossen, Fokie; Dierckx, Rudi; Oudkerk, Matthijs; van Ooijen, Peter

2015-01-01

Objective To evaluate the usability of a radiology workstation after deployment in a hospital. Significance In radiology, it is difficult to perform valid pre-deployment usability evaluations due to the heterogeneity of the user group, the complexity of the radiological workflow, and the complexity

Usability Plans and Schemes for Low Fidelity Prototypes

DEFF Research Database (Denmark)

Schultz, Nette; Kirk Sørensen, Jannick; Sørensen, Lene

2006-01-01

Internal report of WP1 task 4 activities from August 2006 to December 2006. This report describes the setup of a usability evaluation framework for evaluating core MAGNET concepts in terms of usability. Initially, these core concepts are identified and modes of operation involving...

Usability evaluation of a locomotor therapy device considering different strategies

Directory of Open Access Journals (Sweden)

Langthaler Sonja

2016-09-01

Full Text Available Usability of medical devices is one of the main determining factors in preventing use errors in treatment and strongly correlates to patient safety and quality of treatment. This thesis demonstrates the usability testing and evaluation of a prototype for locomotor therapy of infants. Therefore, based on the normative requirements of the EN 62366, a concept combined of evaluation procedures and assessing methods was created to enable extensive testing and analysis of the different aspects of usability. On the basis of gathered information weak points were identified and appropriate measures were presented to increase the usability and operating safety of the locomotor prototype. The overall outcome showed an usability value of 77.4% and an evaluation score of 6.99, which can be interpreted as “satisfactory”.

[The surface roughness analysis of the titanium casting founding by a new titanium casting investment material].

Science.gov (United States)

Liang, Qin-ye; Wu, Xia-yi; Lin, Xue-feng

2012-04-01

To investigate the surface roughness property of the titanium castings cast in a new investment for titanium casting. Six wax patterns (20 mm × 20 mm × 0.5 mm) were invested using two investments: three in a new titanium investment material and three in the control material (Rematitan Plus). Six titanium specimens were obtained by conventional casting. After casting, surface roughness of the specimens were evaluated with a surface profilometer. The surface roughness of the specimens cast in new titanium investment material was (1.72 ± 0.08) µm, which was much smaller than that from Rematitan Plus [(1.91 ± 0.15) µm, P cast using these two investment materials are both smooth enough to fulfill the demand of the titanium precision-casting for prosthodontic clinical use.

Usability Testing for Developing Effective Interactive Multimedia Software: Concepts, Dimensions, and Procedures

Directory of Open Access Journals (Sweden)

Sung Heum Lee

1999-04-01

Full Text Available Usability testing is a dynamic process that can be used throughout the process of developing interactive multimedia software. The purpose of usability testing is to find problems and make recommendations to improve the utility of a product during its design and development. For developing effective interactive multimedia software, dimensions of usability testing were classified into the general categories of: learnability; performance effectiveness; flexibility; error tolerance and system integrity; and user satisfaction. In the process of usability testing, evaluation experts consider the nature of users and tasks, tradeoffs supported by the iterative design paradigm, and real world constraints to effectively evaluate and improve interactive multimedia software. Different methods address different purposes and involve a combination of user and usability testing, however, usability practitioners follow the seven general procedures of usability testing for effective multimedia development. As the knowledge about usability testing grows, evaluation experts will be able to choose more effective and efficient methods and techniques that are appropriate to their goals.

The role of usability in e-lexicography

Directory of Open Access Journals (Sweden)

André H. du Plessis

2017-05-01

Full Text Available In the development of the metalexicography, the primary focus of metalexicographers was on the development of printed dictionaries. As technology advances, the focus now shifts towards online and electronic products. Tarp (2009:23–24 posits that this shift results in metalexicographic shortcomings. This means that the theories used to create and evaluate dictionaries are not sufficient anymore. Bergenholtz and Bothma (2011:54 show that dictionaries as data carriers are now not only limited to the field of lexicography, but also to information technological fields. For current lexicographers to be successful in the digital age, the theories used in designing, developing and critiquing dictionaries must adapt with regards to current information technological trends, norms and practices. One aspect that must be addressed is the usability of dictionaries and other electronic lexicographic tools. By using usability theories and standards, current metalexicographical principles can be adapted for the digital age in a streamlined fashion. This study aims to show how usability theories and standards can be advantageous for metalexicography and that future electronic metalexicographic endeavours should not be undertaken without considering the usability as part of the theoretical framework.

Examination and Elimination of Defects in Cone Casting Made of Ductile Cast Iron

Directory of Open Access Journals (Sweden)

Guzik E.

2013-12-01

Full Text Available In the scope of existing cooperation with the Foundry of Cast Iron ZM “WSK Rzeszów” Ltd. there was carried out research work of microstructure and mechanical properties in the walls of a cone casting made of ductile cast iron. The particular attention was being put to the search of the potential brittle phases which have deleterious effect on ductility and dynamic properties of highly strained use of the casting prone to the potential risk of cracks during the highly strained use.

Colour Metallography of Cast Iron

Directory of Open Access Journals (Sweden)

Zhou Jiyang

2009-05-01

Full Text Available Cast iron, as a traditional metal material, has advantages of low total cost, good castability and machinability, good wear resistance and low notch sensitivity, and is still facing tough challenge in quality, property and variety of types etc. Experts and engineers studying and producing iron castings all around world extremely concern this serious challenge. Over more than 30 years, a great of research work has been carried out on how to further improve its property, expand its application and combine cast iron technology with some hi-techs (for example, computer technology. Nevertheless, cast iron is a multi-element and multi-phase alloy and has complex and variety of structures and still has great development potential in structure and property. For further studying and developing cast iron, theoretical research work is important promise, and the study on solidification process and control mechanism of graphite morphology is fundamental for improving property of cast iron and developing new type of cast iron.Metallography of cast iron normally includes two sections: liquid phase transformation and solid phase transformation. The book, Colour Metallography of Cast Iron , uses colour metallography technique to study solidification structures of cast irons: graphite, carbides, austenite and eutectics; and focuses on solidification processes. With progress of modern solidification theory, the control of material solidification process becomes important measure for improving traditionalmaterials and developing new materials. Solidification structure not only influences mechanical and physical properties of cast iron, but also affects its internal quality. The book uses a large amount of colour photos to describe the formation of solidification structures and their relations. Crystallization phenomena, which cannot be displayed with traditional metallography, are presented and more phase transformation information is obtained from these colour

Privacy Enhancing Keyboard: Design, Implementation, and Usability Testing

Directory of Open Access Journals (Sweden)

Zhen Ling

2017-01-01

Full Text Available To protect users from numerous password inference attacks, we invent a novel context aware privacy enhancing keyboard (PEK for Android touch-based devices. Usually PEK would show a QWERTY keyboard when users input text like an email or a message. Nevertheless, whenever users enter a password in the input box on his or her touch-enabled device, a keyboard will be shown to them with the positions of the characters shuffled at random. PEK has been released on the Google Play since 2014. However, the number of installations has not lived up to our expectation. For the purpose of usable security and privacy, we designed a two-stage usability test and performed two rounds of iterative usability testing in 2016 and 2017 summer with continuous improvements of PEK. The observations from the usability testing are educational: (1 convenience plays a critical role when users select an input method; (2 people think those attacks that PEK prevents are remote from them.

A human reliability based usability evaluation method for safety-critical software

International Nuclear Information System (INIS)

Boring, R. L.; Tran, T. Q.; Gertman, D. I.; Ragsdale, A.

2006-01-01

Boring and Gertman (2005) introduced a novel method that augments heuristic usability evaluation methods with that of the human reliability analysis method of SPAR-H. By assigning probabilistic modifiers to individual heuristics, it is possible to arrive at the usability error probability (UEP). Although this UEP is not a literal probability of error, it nonetheless provides a quantitative basis to heuristic evaluation. This method allows one to seamlessly prioritize and identify usability issues (i.e., a higher UEP requires more immediate fixes). However, the original version of this method required the usability evaluator to assign priority weights to the final UEP, thus allowing the priority of a usability issue to differ among usability evaluators. The purpose of this paper is to explore an alternative approach to standardize the priority weighting of the UEP in an effort to improve the method's reliability. (authors)

Development and testing of new upper-limb prosthetic devices: research designs for usability testing.

Science.gov (United States)

Resnik, Linda

2011-01-01

The purposes of this article are to describe usability testing and introduce designs and methods of usability testing research as it relates to upper-limb prosthetics. This article defines usability, describes usability research, discusses research approaches to and designs for usability testing, and highlights a variety of methodological considerations, including sampling, sample size requirements, and usability metrics. Usability testing is compared with other types of study designs used in prosthetic research.

Casting characteristics of Al-Mg alloy 535 cast in permanent moulds

International Nuclear Information System (INIS)

Fasoyinu, F.A.; Thomson, J.; Cousineau, D.; Castles, T.; Sahoo, M.

2002-01-01

Aluminum alloy 535 could be used for automotive and marine applications because of its good corrosion resistance against mild alkaline and salt spray exposure. The majority of components from this alloy are usually produced by sand casting because it is prone to hot shortness and has poor fluidity when poured in permanent moulds. In an attempt to improve its castability in permanent moulds, casting characteristics such as casting fluidity and hot tear resistance have been studied. In addition, the effectiveness of titanium, boron, scandium, zirconium and a combination of selected elements from this group as grain refiners were evaluated. It s shown that alloy 535 exhibits good casting fluidity when poured with adequate metal superheat and that there is significant improvement in hot tear resistance following grain refinement. (author)

Cheminformatics Analysis of EPA ToxCast Chemical Libraries ...

Science.gov (United States)

An important goal of toxicology research is the development of robust methods that use in vitro and chemical structure information to predict in vivo toxicity endpoints. The US EPA ToxCast program is addressing this goal using ~600 in vitro assays to create bioactivity profiles on a set of 320 compounds, mostly pesticide actives, that have well characterized in vivo toxicity. These 320 compounds (EPA-320 set evaluated in Phase I of ToxCast) are a subset of a much larger set of ~10,000 candidates that are of interest to the EPA (called here EPA-10K). Predictive models of in vivo toxicity are being constructed from the in vitro assay data on the EPA-320 chemical set. These models require validation on additional chemicals prior to wide acceptance, and this will be carried out by evaluating compounds from EPA-10K in Phase II of ToxCast. We have used cheminformatics approaches including clustering, data visualization, and QSAR to develop models for EPA-320 that could help prioritizing EPA-10K validation chemicals. Both chemical descriptors, as well as calculated physicochemical properties have been used. Compounds from EPA-10K are prioritized based on their similarity to EPA-320 using different similarity metrics, with similarity thresholds defining the domain of applicability for the predictive models built for EPA-320 set. In addition, prioritized lists of compounds of increasing dissimilarity from the EPA-320 have been produced, to test the ability of the EPA-320

Users Views about the Usability of Digital Libraries

Science.gov (United States)

Koohang, Alex; Ondracek, James

2005-01-01

This study examined users' views about the usability of digital libraries' current and perceived importance. Age, gender, prior experience with the Internet, college status, and digital library proficiency are the independent variables. Users' current views about the usability of digital libraries and users perceived importance of digital library…

Information users and usability in the digital age

CERN Document Server

Chowdhury, G G

2013-01-01

Gives an overview of the necessary issues relating to information users and the usability of information services in the digital world, including user-centred design, and the characteristics and behaviour of information users. This book helps readers understand why information users and the usability of information services are important.

A Usability Evaluation of Academic Virtual Reference Services

Science.gov (United States)

Chow, Anthony S.; Croxton, Rebecca A.

2014-01-01

This study examined the usability of five virtual reference services--instant messenger chat, e-mail, telephone, text messaging, and Skype videoconferencing--by having 31 undergraduate and graduate students evaluate the usability of the virtual reference services of two different universities. The study's results suggest that user preference and…

UX Professionals’ Definitions of Usability and UX

DEFF Research Database (Denmark)

Rajanen, Dorina; Clemmensen, Torkil; Iivari, Netta

2017-01-01

This paper examines the views of user experience (UX) professionals on the definitions of usability and UX, and compares the findings between countries and within different socio-cultural groups. A mixed-method analysis was employed on data gathered on 422 professionals through a survey in Turkey......, Finland, Denmark, France, and Malaysia. Usability appears to be an established concept, respondents across all countries agreeing on the importance of the ISO 9241-11 definition. There is also a tendency that UX professionals attach organizational perspective to usability. UX professionals diverge when...... defining UX, and there are systematic differences related to socio-cultural conditions. UX professionals in Finland and France incline more towards the definition highlighting the experiential qualities, when compared to Turkey and Malaysia that incline towards the definition reflecting the ease of use...

Different Perspectives on Technology Acceptance: The Role of Technology Type and Age

Science.gov (United States)

Arning, Katrin; Ziefle, Martina

Although eHealth technologies offer an enormous potential to improve healthcare, the knowledge about key determinants of acceptance for eHealth technology is restricted. While the underlying technology of eHealth technologies and Information and Communication technology (ICT) is quite similar, utilization contexts and using motives are quite different. In order to explore the role of technology type on acceptance, we contrasted central application characteristics of both technology types using the scenario technique. A questionnaire was administered (n = 104) measuring individual variables (age, gender) and attitudes regarding an eHealth application (blood sugar meter) in contrast to an ICT device (Personal Digital Assistant, PDA). Older users basically approved the utilization of health-related technologies and perceived lower usability barriers. In addition, we identified main utilization motives of eHealth technology and technology-specific acceptance patterns, especially regarding issues of data safety in the eHealth context. Effects of age and gender in acceptance ratings suggest a differential perspective on eHealth acceptance. Finally, practical interventions were derived in order to support eHealth device design and to promote acceptance of eHealth technology.

Applying RP-FDM Technology to Produce Prototype Castings Using the Investment Casting Method

Directory of Open Access Journals (Sweden)

M. Macků

2012-09-01

Full Text Available The research focused on the production of prototype castings, which is mapped out starting from the drawing documentation up to theproduction of the casting itself. The FDM method was applied for the production of the 3D pattern. Its main objective was to find out whatdimensional changes happened during individual production stages, starting from the 3D pattern printing through a silicon mouldproduction, wax patterns casting, making shells, melting out wax from shells and drying, up to the production of the final casting itself.Five measurements of determined dimensions were made during the production, which were processed and evaluated mathematically.A determination of shrinkage and a proposal of measures to maintain the dimensional stability of the final casting so as to meetrequirements specified by a customer were the results.

Integrating discount usability in scrum development process in Ethiopia

DEFF Research Database (Denmark)

Teka, Degif; Dittrich, Y.; Kifle, Mesfin

2017-01-01

be adapted and integrated into the Scrum-agile development with especial emphasis on the Ethiopian context. The research aims at adapting software engineering and ICT development methods to the specific situation and integrating user-centered design (UCD) and lightweight usability methods into agile...... end users and developers. Culturally adapted user pair testing and heuristic evaluation supported usability testing and supported developers in getting early feedback. Integrated approach of discount usability with the Scrum process has been developed and evaluated first with the involved...

Casting of microstructured shark skin surfaces and possible applications on aluminum casting parts

Directory of Open Access Journals (Sweden)

Todor Ivanov

2011-02-01

Full Text Available Within the project Functional Surfaces via Micro- and Nanoscaled Structures?which is part of the Cluster of Excellence 揑ntegrative Production Technology?established and financed by the German Research Foundation (DFG, an investment casting process to produce 3-dimensional functional surfaces down to a structural size of 1 μm on near-net-shape-casting parts has been developed. The common way to realize functional microstructures on metallic surfaces is to use laser ablation, electro discharge machining or micro milling. The handicap of these processes is their limited productivity. The approach of this project to raise the efficiency is to use the investment casting process to replicate microstructured surfaces by moulding from a laser-microstructured grand master pattern. The main research objective deals with the investigation of the single process steps of the investment casting process with regard to the moulding accuracy. Actual results concerning making of the wax pattern, suitability of ceramic mould and core materials for casting of an AlSi7Mg0.3 alloy as well as the knock-out behavior of the shells are presented. By using of the example of an intake manifold of a gasoline race car engine, a technical shark skin surface has been realized to reduce the drag of the intake air. The intake manifold consists of an air-restrictor with a defined inner diameter which is microstructured with technical shark skin riblets. For this reason the inner diameter cannot be drilled after casting and demands a very high accuracy of the casting part. A technology for the fabrication and demoulding of accurate microstructured castings are shown. Shrinkage factors of different moulding steps of the macroscopic casting part as well as the microscopic riblet structure have been examined as well.

A framework for characterizing usability requirements elicitation and analysis methodologies (UREAM)

NARCIS (Netherlands)

Trienekens, J.J.M.; Kusters, R.J.; Mannaert, H.

2012-01-01

Dedicated methodologies for the elicitation and analysis of usability requirements have been proposed in literature, usually developed by usability experts. The usability of these approaches by non-expert software engineers is not obvious. In this paper, the objective is to support developers and

A Longitudinal Study of Usability in Health Care - Does Time Heal?

DEFF Research Database (Denmark)

Kjeldskov, Jesper; Skov, Mikael B.; Stage, Jan

2007-01-01

for 15 months, we repeated the evaluation. Our aim was to inquire into the nature of usability problems experienced by novice and expert users, and to see to what extend usability problems of a health care information system may or may not disappear over time, as the nurses get more familiar......We report from a longitudinal laboratory-based usability evaluation of a health care information system. A usability evaluation was conducted with novice users when an electronic patient record system was being deployed in a large hospital. After the nurses had used the system in their daily work...... with it – if time heals poor design. On the basis of our study, we present findings on the usability of the electronic patient system as experienced by the nurses at these two different points in time and discuss implications for evaluating usability in health care....

Aluminium Foam and Magnesium Compound Casting Produced by High-Pressure Die Casting

Directory of Open Access Journals (Sweden)

Iban Vicario

2016-01-01

Full Text Available Nowadays, fuel consumption and carbon dioxide emissions are two of the main focal points in vehicle design, promoting the reduction in the weight of vehicles by using lighter materials. The aim of the work is to evaluate the influence of different aluminium foams and injection parameters in order to obtain compound castings with a compromise between the obtained properties and weight by high-pressure die cast (HPDC using aluminium foams as cores into a magnesium cast part. To evaluate the influence of the different aluminium foams and injection parameters on the final casting products quality, the type and density of the aluminium foam, metal temperature, plunger speed, and multiplication pressure have been varied within a range of suitable values. The obtained compound HPDC castings have been studied by performing visual and RX inspections, obtaining sound composite castings with aluminium foam cores. The presence of an external continuous layer on the foam surface and the correct placement of the foam to support injection conditions permit obtaining good quality parts. A HPDC processed magnesium-aluminium foam composite has been developed for a bicycle application obtaining a suitable combination of mechanical properties and, especially, a reduced weight in the demonstration part.

Implementing a collaborative virtual environment — specification for a usability metamodel

Directory of Open Access Journals (Sweden)

Maria L Villegas R

2009-01-01

Full Text Available This research presents the results of the first phase of a macro-project for constructing a collaborative virtual environment. It was aimed at selecting a graphical interface from five proposed for such environment, considering each one’s level of usability. Seve- ral standards of usability and user-centered design patterns were studied for specifying interface measurment criteria for speci- fying a usability metamodel; this defined the variables and rules to be taken into accout when measuring graphic user interface (GUI usability level for collaborative virtual environments. The use of metaphors when specifying graphic user interfaces is also briefly looked at as a source of new usability and satisfaction related to such interface use.

The Usability Analysis of An E-Learning Environment

Directory of Open Access Journals (Sweden)

Fulya TORUN

2015-10-01

Full Text Available In this research, an E-learning environment is developed for the teacher candidates taking the course on Scientific Research Methods. The course contents were adapted to one of the constructivist approach models referred to as 5E, and an expert opinion was received for the compliance of this model. An usability analysis was also performed to determine the usability of the e-learning environment. The participants of the research comprised 42 teacher candidates. The mixed method was used in the research. 3 different data collection tools were used in order to measure the three basic concepts of usability analyses, which are the dimensions of effectiveness, efficiency and satisfaction. Two of the data collection tools were the scales developed by different researchers and were applied with the approval received from the researchers involved. On the other hand, the usability test as another data tool was prepared by the researchers who conducted this study for the purpose of determining the participants’ success in handling the twelve tasks assigned to them with respect to the use of elearning environment, the seconds they spent on that environment and the number of clicks they performed. Considering the results of the analyses performed within the data obtained, the usability of the developed e-learning environment proved to be at a higher rate.

Usability Evaluation of An Electronic Medication Administration Record (eMAR) Application

Science.gov (United States)

Guo, J.; Iribarren, S.; Kapsandoy, S.; Perri, S.; Staggers, N.

2011-01-01

Background Electronic medication administration records (eMARs) have been widely used in recent years. However, formal usability evaluations are not yet available for these vendor applications, especially from the perspective of nurses, the largest group of eMAR users. Objective To conduct a formal usability evaluation of an implemented eMAR. Methods Four evaluators examined a commercial vendor eMAR using heuristic evaluation techniques. The evaluators defined seven tasks typical of eMAR use and independently evaluated the application. Consensus techniques were used to obtain 100% agreement of identified usability problems and severity ratings. Findings were reviewed with 5 clinical staff nurses and the Director of Clinical Informatics who verified findings with a small group of clinical nurses. Results Evaluators found 60 usability problems categorized into 233 heuristic violations. Match, Error, and Visibility heuristics were the most frequently violated. Administer Medication and Order and Modify Medications tasks had the highest number of heuristic violations and usability problems rated as major or catastrophic. Conclusion The high number of usability problems could impact the effectiveness, efficiency and satisfaction of nurses’ medication administration activities and may include concerns about patient safety. Usability is a joint responsibility between sites and vendors. We offer a call to action for usability evaluations at all sites and eMAR application redesign as necessary to improve the user experience and promote patient safety. PMID:23616871

Assessment of Usability Benchmarks: Combining Standardized Scales with Specific Questions

Directory of Open Access Journals (Sweden)

Stephanie Bettina Linek

2011-12-01

Full Text Available The usability of Web sites and online services is of rising importance. When creating a completely new Web site, qualitative data are adequate for identifying the most usability problems. However, changes of an existing Web site should be evaluated by a quantitative benchmarking process. The proposed paper describes the creation of a questionnaire that allows a quantitative usability benchmarking, i.e. a direct comparison of the different versions of a Web site and an orientation on general standards of usability. The questionnaire is also open for qualitative data. The methodology will be explained by the digital library services of the ZBW.

Workshop on cultural usability and human work interaction design

DEFF Research Database (Denmark)

Clemmensen, Torkil; Ørngreen, Rikke; Roese, Kerstin

2008-01-01

it into interaction design. The workshop will present current research into cultural usability and human work interaction design. Cultural usability is a comprehensive concept, which adheres to all kinds of contexts in which humans are involved (private family, work, public and private organizations, nature......, Workplace observation, Think-Aloud Usability Test, etc. These techniques often give - seemingly - similar results when applied in diverse cultural settings, but experience shows that we need a deep understanding of the cultural, social and organizational context to interpret the results, and to transform...

Applying RP-FDM Technology to Produce Prototype Castings Using the Investment Casting Method

Directory of Open Access Journals (Sweden)

Macků M.

2012-09-01

Full Text Available The research focused on the production of prototype castings, which is mapped out starting from the drawing documentation up to the production of the casting itself. The FDM method was applied for the production of the 3D pattern. Its main objective was to find out what dimensional changes happened during individual production stages, starting from the 3D pattern printing through a silicon mould production, wax patterns casting, making shells, melting out wax from shells and drying, up to the production of the final casting itself. Five measurements of determined dimensions were made during the production, which were processed and evaluated mathematically. A determination of shrinkage and a proposal of measures to maintain the dimensional stability of the final casting so as to meet requirements specified by a customer were the results.

Casting AISI 316 steel by gel cast

International Nuclear Information System (INIS)

Ozols, A; Thern, G; Rozenberg, S; Barreiro, M; Marajofsky, A

2004-01-01

The feasibility of producing AISI 316 steel components from their powders and avoiding their compaction is analyzed. A casting technique is tested that is similar to gel casting, used for ceramic materials. In the initial stage, the process consists of the formulation of a concentrated barbotine of powdered metal in a solution of water soluble organic monomers, which is cast in a mold and polymerized in situ to form a raw piece in the shape of the cavity. The process can be performed under controlled conditions using barbotines with a high monomer content from the acrylimide family. Then, the molded piece is slowly heated until the polymer is eliminated, and it is sintered at temperatures of 1160 o C to 1300 o C under a dry hydrogen atmosphere, until the desired densities are attained. The density and micro structure of the materials obtained are compared with those for the materials compacted and synthesized by the conventional processes. The preliminary results show the feasibility of the process for the production of certain kinds of structural components (CW)

Measurement of Usability for Multimedia Interactive Learning Based on Website in Mathematics for SMK

Science.gov (United States)

Sukardjo, Moch.; Sugiyanta, Lipur

2018-04-01

implemented thoroughly. The only way to get test with high quality results is to start testing at the beginning of the design process and continuously testing each of the next steps. This research performs usability testing on of website by using WAMMI criterion (Website Analysis and Measurement Inventory) and will be focused on how convenience using the website application. Components of Attractiveness, Controllability, Efficiency, Helpfulness, and Learnability are applied. The website in Multimedia Interactive Learning for Mathematics SMK Class X can be in accordance with the purpose to be accepted by student to improve student learning outcomes. The results show that WAMMI method show the usability value of Multimedia Mathematics SMK Class X is about from 70% to 90%.

Usability Evaluation Method for Agile Software Development

Directory of Open Access Journals (Sweden)

Saad Masood Butt

2015-02-01

Full Text Available Agile methods are the best fit for tremendously growing software industry due to its flexible and dynamic nature. But the software developed using agile methods do meet the usability standards? To answer this question we can see that majority of agile software development projects currently involve interactive user interface designs, which can only be possible by following User Centered Design (UCD in agile methods. The question here is, how to integrate UCD with agile models. Both Agile models and UCD are iterative in nature but agile models focus on coding and development of software; whereas, UCD focuses on user interface of the software. Similarly, both of them have testing features where the agile model involves automated tested code while UCD involves an expert or a user to test the user interface. In this paper, a new agile usability model is proposed and the evaluation is of the proposed model is presented by practically implementing it in three real life projects. . Key results from these projects clearly show: the proposed agile model incorporates usability evaluation methods, improves the relationship between usability experts to work with agile software experts; in addition, allows agile developers to incorporate the result from UCD into subsequent interactions.

Materials for Advanced Ultrasupercritical Steam Turbines Task 4: Cast Superalloy Development

Energy Technology Data Exchange (ETDEWEB)

Thangirala, Mani

2015-09-30

validated with solidification simulation analysis and the casting met NDT inspection and acceptance criteria. Heat treated and sectioned to extract trepan samples at different locations comparing with cast on coupons test data. Material properties requisite for design, such as tensile, creep/rupture, LCF, Fracture Toughness, Charpy V-notch chemical analysis testing were carried out. The test results will be presented in the final report. The typical Haynes 282 large size Steam Turbine production casting from Order to Delivery foundry schedule with the activity break up is shown in Figures 107 and 108. • From Purchase Order placement to Casting pouring ~ 26 weeks. 1. Sales and commercial review 3 2. Engineering Drawings/models review 4 3. Pattern and core box manufacturing 6 4. Casting process engineering review 4 5. FEM and solidification simulation analysis 4 6. Gating & Feeder Attachments, Ceramic tiling 2 7. Molding and coremaking production scheduling 6 8. Melting planning and schedule 3 9. Pouring, cooling and shake out 2 • From Pouring to casting Delivery ~ 29 weeks 10. Shot blast and riser cutting, gates removal 3 11. Homogenizing , solutionizing HT furnace prep 4 12. Grinding, Fettling 2 13. Aging HT Cycle, cooling 2 14. VT and LPT NDT inspections 2 15. Radiographic inspection 4 16. Mechanical testing, Chemical analysis test certs 4 17. Casting weld repair upgrades and Aging PWHT 4 18. NDT after weld repairs and casting upgrades 3 19. Casting Final Inspection and test certifications 3 20. Package and delivery 2 Hence the Total Lead time from P.O to Casting delivery is approximately 55 weeks. The Task 4.2 and Task 4.3 activities and reporting completed.

Users' performance in lab and non-lab environments through online usability testing:A case of evaluating the usability of digital academic libraries' websites

OpenAIRE

Alharbi, Abeer; Mayhew, Pam

2015-01-01

The factors related to the environment in which users operate may be of a vital importance when trying to understand how they experience a particular system. It is required that we find out how we can get to know those factors to investigate if they affect the users' performance in usability testing. An online usability study has emerged that can be attempted by a large, varied pool of users' anywhere with an Internet connection. Would the usage of an online usability study help to give compr...

Usability Testing of an Academic Library Web Site: A Case Study.

Science.gov (United States)

Battleson, Brenda; Booth, Austin; Weintrop, Jane

2001-01-01

Discusses usability testing as a tool for evaluating the effectiveness and ease of use of academic library Web sites; considers human-computer interaction; reviews major usability principles; and explores the application of formal usability testing to an existing site at the University at Buffalo (NY) libraries. (Author/LRW)

Direct Integration: Training Software Developers to Conduct Usability Evaluations

DEFF Research Database (Denmark)

Skov, Mikael B.; Stage, Jan

2008-01-01

is based on an empirical study where 36 teams with a total of 234 first-year university students on software development and design educations were trained in a simple approach for user-based website usability testing that was taught in a 40 hour course. This approach supported them in planning, conducting......Many improvements of the interplay between usability evaluation and software development rely either on better methods for conducting usability evaluations or on better formats for presenting evaluation results in ways that are useful for software designers and developers. Both approaches involve...... a complete division of work between developers and evaluators, which is an undesirable complexity for many software development projects. This paper takes a different approach by exploring to what extent software developers and designers can be trained to carry out their own usability evaluations. The paper...

Social Context in Usability Evaluations: Concepts, Processes and Products

DEFF Research Database (Denmark)

Jensen, Janne Jul

social context is considered important, only little research has been done to identify how it influences usability evaluations. In this thesis I explore how social context affects the process and product of a usability evaluation and explain the findings in terms of the theory of behaviour settings...... leader) and non-operatives (members, spectators, neutrals and potentials) from the theory of behaviour settings to usability evaluations generates an understanding and create an awareness of the level of power possessed by each of the participants in the social context. 2. On the operative level...... and a field experiment. Findings from these activities are presented in five published paper contributions. I furthermore introduce the theory of behaviour settings as a tool to help characterise the key concepts of social context which, together with an understanding of usability evaluations, provide...

Symptomatic stent cast.

LENUS (Irish Health Repository)

Keohane, John

2012-02-03

Biliary stent occlusion is a major complication of endoscopic stent insertion and results in repeat procedures. Various theories as to the etiology have been proposed, the most frequently studied is the attachment of gram negative bacteria within the stent. Several studies have shown prolongation of stent patency with antibiotic prophylaxis. We report the case of stent occlusion from a cast of a previously inserted straight biliary stent; a "stent cast" in an 86-year-old woman with obstructive jaundice. This was retrieved with the lithotrypter and she made an uneventful recovery. This is the first reported case of a biliary stent cast.

Fracture Mechanisms in Steel Castings

Directory of Open Access Journals (Sweden)

Stradomski Z.

2013-09-01

Full Text Available The investigations were inspired with the problem of cracking of steel castings during the production process. A single mechanism of decohesion - the intergranular one - occurs in the case of hot cracking, while a variety of structural factors is decisive for hot cracking initiation, depending on chemical composition of the cast steel. The low-carbon and low-alloyed steel castings crack due to the presence of the type II sulphides, the cause of cracking of the high-carbon tool cast steels is the net of secondary cementite and/or ledeburite precipitated along the boundaries of solidified grains. Also the brittle phosphor and carbide eutectics precipitated in the final stage solidification are responsible for cracking of castings made of Hadfield steel. The examination of mechanical properties at 1050°C revealed low or very low strength of high-carbon cast steels.

Dogmas in the assessment of usability evaluation methods

DEFF Research Database (Denmark)

Hornbæk, Kasper

2010-01-01

Usability evaluation methods (UEMs) are widely recognised as an essential part of systems development. Assessments of the performance of UEMs, however, have been criticised for low validity and limited reliability. The present study extends this critique by describing seven dogmas in recent work ...... research approaches that may help move beyond the dogmas. In particular, we emphasise detailed studies of evaluation processes, assessments of the impact of UEMs on design carried out in real-world systems development and analyses of how UEMs may be combined......Usability evaluation methods (UEMs) are widely recognised as an essential part of systems development. Assessments of the performance of UEMs, however, have been criticised for low validity and limited reliability. The present study extends this critique by describing seven dogmas in recent work...... on UEMs. The dogmas include using inadequate procedures and measures for assessment, focusing on win-lose outcomes, holding simplistic models of how usability evaluators work, concentrating on evaluation rather than on design and working from the assumption that usability problems are real. We discuss...

On the assessment of usability testing methods for children

NARCIS (Netherlands)

Markopoulos, P.; Bekker, M.M.

2003-01-01

The paper motivates the need to acquire methodological knowledge for involving children as test users in usability testing. It introduces a methodological framework for delineating comparative assessments of usability testing methods for children participants. This framework consists in three

Exploring the Usability of Mobile Apps Supporting Radiologists' Training in Diagnostic Decision Making.

Science.gov (United States)

Kim, Min Soon; Aro, Michael R; Lage, Kraig J; Ingalls, Kevin L; Sindhwani, Vivek; Markey, Mia K

2016-03-01

The objective of this study was to conduct a usability evaluation of mobile apps for supporting education and training in radiologic diagnostic decision-making processes. Of 381 mobile apps available at two major stores (Google Play and iTunes), eight iOS apps were selected for laboratory-based usability tests. Six staff radiologists completed eight app-specific task sets, using a think-aloud strategy. The triangular methods approach included quantitative performance measures, System Usability Scale (SUS), and qualitative thematic analysis using heuristic usability principles of usability issues. Overall, radiologists achieved higher than 70% success, with favorable SUS scores, in completing the tasks for seven of the eight apps. However, task success rate and SUS score had a weak relation (r = 0.23), indicating that the perceived usability may not reflect the holistic usability of the app. Task analysis and self-report revealed 108 usability issues, which were condensed to 55 unique issues and categorized by nine usability themes and mapped to ten usability heuristics. Nonintuitive functionality (eg, nonintuitive or misleading labels) was the most frequent theme observed, leading to inefficient navigation. These usability findings were consistent with the 13 improvements the radiologists suggested. This study demonstrates the feasibility of usability evaluation of radiology mobile apps and suggests potential improvements in the development of radiology mobile apps. This study also suggests that proficiency with mobile devices may not be equivalent to being an expert user, proficient in using the apps. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Modelling the Cast Component Weight in Hot Chamber Die Casting using Combined Taguchi and Buckingham's π Approach

Science.gov (United States)

Singh, Rupinder

2018-02-01

Hot chamber (HC) die casting process is one of the most widely used commercial processes for the casting of low temperature metals and alloys. This process gives near-net shape product with high dimensional accuracy. However in actual field environment the best settings of input parameters is often conflicting as the shape and size of the casting changes and one have to trade off among various output parameters like hardness, dimensional accuracy, casting defects, microstructure etc. So for online inspection of the cast components properties (without affecting the production line) the weight measurement has been established as one of the cost effective method (as the difference in weight of sound and unsound casting reflects the possible casting defects) in field environment. In the present work at first stage the effect of three input process parameters (namely: pressure at 2nd phase in HC die casting; metal pouring temperature and die opening time) has been studied for optimizing the cast component weight `W' as output parameter in form of macro model based upon Taguchi L9 OA. After this Buckingham's π approach has been applied on Taguchi based macro model for the development of micro model. This study highlights the Taguchi-Buckingham based combined approach as a case study (for conversion of macro model into micro model) by identification of optimum levels of input parameters (based on Taguchi approach) and development of mathematical model (based on Buckingham's π approach). Finally developed mathematical model can be used for predicting W in HC die casting process with more flexibility. The results of study highlights second degree polynomial equation for predicting cast component weight in HC die casting and suggest that pressure at 2nd stage is one of the most contributing factors for controlling the casting defect/weight of casting.

Investigation of the Usability of Computerized Critical Care Information Systems in Germany.

Science.gov (United States)

von Dincklage, Falk; Suchodolski, Klaudiusz; Lichtner, Gregor; Friesdorf, Wolfgang; Podtschaske, Beatrice; Ragaller, Maximilian

2017-01-01

The term "usability" describes how effectively, efficiently, and with what level of user satisfaction an information system can be used to accomplish specific goals. Computerized critical care information systems (CCISs) with high usability increase quality of care and staff satisfaction, while reducing medication errors. Conversely, systems lacking usability can interrupt clinical workflow, facilitate errors, and increase charting time. The aim of this study was to investigate and compare usability across CCIS currently used in Germany. In this study, German intensive care unit (ICU) nurses and physicians completed a specialized, previously validated, web-based questionnaire. The questionnaire assessed CCIS usability based on three rating models: an overall rating of the systems, a model rating technical usability, and a model rating task-specific usability. We analyzed results from 535 survey participants and compared eight different CCIS commonly used in Germany. Our results showed that usability strongly differs across the compared systems. The system ICUData had the best overall rating and technical usability, followed by the platforms ICM and MetaVision. The same three systems performed best in the rating of task-specific usability without significant differences between each other. Across all systems, overall ratings were more dependent on ease-of-use aspects than on aspects of utility/functionality, and the general scope of the functions offered was rated better than how well the functions are realized. Our results suggest that manufacturers should shift some of their effort away from the development of new features and focus more on improving the ease-of-use and quality of existing features.

Mechanism and application of a newly developed pressure casting process: horizontal squeeze casting

Directory of Open Access Journals (Sweden)

Li Peijie

2014-07-01

Full Text Available Compared to traditional high-pressure die casting (HPDC, horizontal squeeze casting (HSC is a more promising way to fabricate high-integrity castings, owing to a reduced number of gas and shrinkage porosities produced in the casting. In this paper, the differences between HSC and HPDC are assessed, through which it is shown that the cavity filling velocity and the size of the gating system to be the most notable differences. Equipment development and related applications are also reviewed. Furthermore, numerical simulation is used to analyze the three fundamental characteristics of HSC: slow cavity filling, squeeze feeding and slow sleeve filling. From this, a selection principle is given based on the three related critical casting parameters: cavity filling velocity, gate size and sleeve filling velocity. Finally, two specific applications of HSC are introduced, and the future direction of HSC development is discussed.

Development and usability testing of a web-based cancer symptom and quality-of-life support intervention.

Science.gov (United States)

Wolpin, S E; Halpenny, B; Whitman, G; McReynolds, J; Stewart, M; Lober, W B; Berry, D L

2015-03-01

The feasibility and acceptability of computerized screening and patient-reported outcome measures have been demonstrated in the literature. However, patient-centered management of health information entails two challenges: gathering and presenting data using "patient-tailored" methods and supporting "patient-control" of health information. The design and development of many symptom and quality-of-life information systems have not included opportunities for systematically collecting and analyzing user input. As part of a larger clinical trial, the Electronic Self-Report Assessment for Cancer-II project, participatory design approaches were used to build and test new features and interfaces for patient/caregiver users. The research questions centered on patient/caregiver preferences with regard to the following: (a) content, (b) user interface needs, (c) patient-oriented summary, and (d) patient-controlled sharing of information with family, caregivers, and clinicians. Mixed methods were used with an emphasis on qualitative approaches; focus groups and individual usability tests were the primary research methods. Focus group data were content analyzed, while individual usability sessions were assessed with both qualitative and quantitative methods. We identified 12 key patient/caregiver preferences through focus groups with 6 participants. We implemented seven of these preferences during the iterative design process. We deferred development for some of the preferences due to resource constraints. During individual usability testing (n = 8), we were able to identify 65 usability issues ranging from minor user confusion to critical errors that blocked task completion. The participatory development model that we used led to features and design revisions that were patient centered. We are currently evaluating new approaches for the application interface and for future research pathways. We encourage other researchers to adopt user-centered design approaches when building

Evaluation of Virtual Teaching-Learning Environments based on usability standards

Directory of Open Access Journals (Sweden)

Jose I. Cocunubo-Suarez

2018-01-01

Full Text Available The main objective of this review article is to determine the necessary sub-characteristics or aspects for the evaluation of Virtual Teaching-Learning Environments (VTLEs as final or finished products based on ISO 9126, 14598 and 25000-SQuaRE standards. A systematic information search was carried out. A total of 108 documents were retrieved about subjects such as web usability, virtual learning environments, usability, educational software, educational web evaluation, usability evaluation and web usability evaluation. Out of the 108 documents, 70 were selected by inclusion and exclusion analysis. The eight subfeatures of greater statistical frequency were identified among the subset of documents and then integrated as a proposal for standard 25000-SQuaRE.

NUMERICAL MODELING OF HARDENING OF UNINTERRUPTEDLY-CASTED BRONZE CASTING

Directory of Open Access Journals (Sweden)

E. I. Marukovich

2009-01-01

Full Text Available The three-dimensional numerical model for calculation of thermal fields during solidification of continuously casted bronze casting is developed. Coefficients of heat transfer on borders of calculation areas on the basis of the solution of inverse heat transfer conduction problem are determined. The analysis of thermal fields, depending on loop variables of drawing and the sizes of not cooled zone of crystallizer is curried out.

Game usability advancing the player experience

CERN Document Server

Isbister, Katherine

2008-01-01

I. What is usability and why should I care?A. Overview chapter Isbister and Schaffer (Editors)Introduces key concepts and positions book for primary audiences: game developers andstudents aspiring to work in game development. Addresses key concerns that developersmay have about adopting usability, and sets a broad road map of what is to come in thebook.B. Interview with Tobi Saulnier of 1st PlayableA discussion with the CEO of a small game studio about why and how she uses usabilitytechniques in her development.C. Interview with Don Norman of Nielsen Norman groupA discussion with one of the pr

The STEP database through the end-users eyes--USABILITY STUDY.

Science.gov (United States)

Salunke, Smita; Tuleu, Catherine

2015-08-15

The user-designed database of Safety and Toxicity of Excipients for Paediatrics ("STEP") is created to address the shared need of drug development community to access the relevant information of excipients effortlessly. Usability testing was performed to validate if the database satisfies the need of the end-users. Evaluation framework was developed to assess the usability. The participants performed scenario based tasks and provided feedback and post-session usability ratings. Failure Mode Effect Analysis (FMEA) was performed to prioritize the problems and improvements to the STEP database design and functionalities. The study revealed several design vulnerabilities. Tasks such as limiting the results, running complex queries, location of data and registering to access the database were challenging. The three critical attributes identified to have impact on the usability of the STEP database included (1) content and presentation (2) the navigation and search features (3) potential end-users. Evaluation framework proved to be an effective method for evaluating database effectiveness and user satisfaction. This study provides strong initial support for the usability of the STEP database. Recommendations would be incorporated into the refinement of the database to improve its usability and increase user participation towards the advancement of the database. Copyright © 2015 Elsevier B.V. All rights reserved.

Usability Problem Identification in Culturally Diverse Settings

DEFF Research Database (Denmark)

Clemmensen, Torkil

2012-01-01

There are indications that established methods for evaluating information system usability that have been developed for use in, e.g. Europe or the USA, fail to give reliable results in countries such as India, China or Malaysia. This paper presents the theoretical background, related work...... and a definition of culture that should be useful for studies of multiple-country usability testing. This includes a discussion of cultural fit and the consequences of cultural (in)consistencies between stakeholders in system development and use. As an illustrative example of the kind of academic research...... that needs to be done, a pilot study is described. The pilot study exemplifies themes to explore, who should be participants and where should the study be done, how to find examples of multiple-country usability testing, how to collect data and how to analyse that data and what kind of results and discussion...

The Software Therapist: Usability Problem Diagnosis Through Latent Semantic Analysis

National Research Council Canada - National Science Library

Sparks, Randall; Hartson, Rex

2006-01-01

The work we report on here addresses the problem of low return on investment in software usability engineering and offers support for usability practitioners in identifying, understanding, documenting...

Examining the Use of Usability Results in a Software Development Company

DEFF Research Database (Denmark)

Høegh, Rune Thaarup; Stage, Jan

2004-01-01

This paper presents the first results of a study on a usability evaluation for a Danish software development company. The use of the results from the usability evaluation is examined through interviews with two developers from the software company. It is through an interview with a project leader...... from the company found that the traditional usability report plays a very little role for the development team. Initial results suggest that textual feedback proves more valuable when accompanied with video and oral feedback.......This paper presents the first results of a study on a usability evaluation for a Danish software development company. The use of the results from the usability evaluation is examined through interviews with two developers from the software company. It is through an interview with a project leader...

Wireless application guidelines for usability design and evaluation for developing countries

International Nuclear Information System (INIS)

Khoja, S.A.; Ursani, A.A.; Ali, A.

2009-01-01

The aim of this paper is to provide guidelines for designing wireless applications. These guidelines are developed with the help of Human Computer Interaction based Usability Evaluation surveys and tests results. These guidelines will help in making wireless applications more usable and attractive for users and will help designers to plan effective interactive applications. The guidelines presented in the paper have been derived from the results of surveys, usability tests and SET (Summative Evaluation Tests) carried out over 200 people of Karachi, Pakistan, from different walks of life with different academic and professional backgrounds, making imperative suggestions not only to improve the usability of exciting features given in wireless and mobile products, but also provide suggestions to improve usability of basic components such as, text, navigation, interactivity, multimedia, control and behavior. (author)

Casting thermal simulation

International Nuclear Information System (INIS)

Shamsuddin bin Sulaiman

1994-01-01

The whole of this study is concerned with process simulation in casting processes. This study describes the application of the finite element method as an aid to simulating the thermal design of a high pressure die casting die by analysing the cooling transients in the casting cycle. Two types of investigation were carried out to model the linear and non-linear cooling behavior with consideration of a thermal interface effect. The simulated cooling for different stages were presented in temperature contour form. These illustrate the successful application of the Finite Element Method to model the process and they illustrate the significance of the thermal interface at low pressure

Clean Metal Casting; FINAL

International Nuclear Information System (INIS)

Makhlouf M. Makhlouf; Diran Apelian

2002-01-01

The objective of this project is to develop a technology for clean metal processing that is capable of consistently providing a metal cleanliness level that is fit for a given application. The program has five tasks: Development of melt cleanliness assessment technology, development of melt contamination avoidance technology, development of high temperature phase separation technology, establishment of a correlation between the level of melt cleanliness and as cast mechanical properties, and transfer of technology to the industrial sector. Within the context of the first task, WPI has developed a standardized Reduced Pressure Test that has been endorsed by AFS as a recommended practice. In addition, within the context of task1, WPI has developed a melt cleanliness sensor based on the principles of electromagnetic separation. An industrial partner is commercializing the sensor. Within the context of the second task, WPI has developed environmentally friendly fluxes that do not contain fluorine. Within the context of the third task, WPI modeled the process of rotary degassing and verified the model predictions with experimental data. This model may be used to optimize the performance of industrial rotary degassers. Within the context of the fourth task, WPI has correlated the level of melt cleanliness at various foundries, including a sand casting foundry, a permanent mold casting foundry, and a die casting foundry, to the casting process and the resultant mechanical properties. This is useful in tailoring the melt cleansing operations at foundries to the particular casting process and the desired properties of cast components

Evaluating Distributed Usability: the role of user interfaces in an activity system

Directory of Open Access Journals (Sweden)

Lejla Vrazalic

2003-11-01

Full Text Available Traditional definitions of usability localise this fundamental Human Computer Interaction (HCI concept in the user interface and reduce it to a variety of qualitative and quantitative attributes of the computer system. This simplistic view of usability has been used as the basis for developing design and evaluation methods in the discipline. This paper argues that, as a result, HCI methods are ineffective and suffer from various shortcomings. It is proposed that the notion of usability must be extended to include contextual factors, and viewed as being distributed across an activity system. Adopting this notion of distributed usability then requires a review of existing HCI methods. Usability testing, as a complete and self-contained HCI method, was chosen for this purpose, and the result, a distributed usability evaluation method (DUEM, is presented in this paper.

14 CFR 23.621 - Casting factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Casting factors. 23.621 Section 23.621... Casting factors. (a) General. The factors, tests, and inspections specified in paragraphs (b) through (d... structural castings except castings that are pressure tested as parts of hydraulic or other fluid systems and...

IT investment decision making : Usability of a normative model

NARCIS (Netherlands)

Wijnhoven, Alphonsus B.J.M.; Heerkens, Johannes M.G.

This article analyzes the usability of a multi-criteria decision analysis based on a real options AHP (ROAHP) method for IT-investment decisions. The study presents ROAHP to Chief Information Officers (CIO’s) and collects their opinions on prerequisites for usability, strengths and weaknesses. To

Discovering the User: A Practical Glance at Usability Testing.

Science.gov (United States)

Campbell, Nicole; Walbridge, Sharon; Chisman, Janet; Diller, Karen R.

1999-01-01

This interview focuses on usability testing, one method for evaluating whether library Web sites are useful for users. Discussion includes: benefits and drawbacks of usability testing; why it is important; lessons learned from testing; advice for someone interested in doing a study; and recommendations. (AEF)

Hair casts

OpenAIRE

Sweta S Parmar; Kirti S Parmar; Bela J Shah

2014-01-01

Hair casts or pseudonits are circumferential concretions, which cover the hair shaft in such a way that, it could be easily removed. They are thin, cylindrical, and elongated in length. We present an unusual case of an 8-year-old girl presenting with hair casts. Occurrence of these is unusual, and they may have varied associations. This patient was suffering from developmental delay. It is commonly misdiagnosed as and very important to differentiate from pediculosis capitis.

Enhancing the Usability of an Optical Reader System to Support Point-of-Care Rapid Diagnostic Testing: An Iterative Design Approach.

Science.gov (United States)

Hohenstein, Jess; O'Dell, Dakota; Murnane, Elizabeth L; Lu, Zhengda; Erickson, David; Gay, Geri

2017-11-21

In today's health care environment, increasing costs and inadequate medical resources have created a worldwide need for more affordable diagnostic tools that are also portable, fast, and easy to use. To address this issue, numerous research and commercial efforts have focused on developing rapid diagnostic technologies; however, the efficacy of existing systems has been hindered by usability problems or high production costs, making them infeasible for deployment in at-home, point-of-care (POC), or resource-limited settings. The aim of this study was to create a low-cost optical reader system that integrates with any smart device and accepts any type of rapid diagnostic test strip to provide fast and accurate data collection, sample analysis, and diagnostic result reporting. An iterative design methodology was employed by a multidisciplinary research team to engineer three versions of a portable diagnostic testing device that were evaluated for usability and overall user receptivity. Repeated design critiques and usability studies identified a number of system requirements and considerations (eg, software compatibility, biomatter contamination, and physical footprint) that we worked to incrementally incorporate into successive system variants. Our final design phase culminated in the development of Tidbit, a reader that is compatible with any Wi-Fi-enabled device and test strip format. The Tidbit includes various features that support intuitive operation, including a straightforward test strip insertion point, external indicator lights, concealed electronic components, and an asymmetric shape, which inherently signals correct device orientation. Usability testing of the Tidbit indicates high usability for potential user communities. This study presents the design process, specification, and user reception of the Tidbit, an inexpensive, easy-to-use, portable optical reader for fast, accurate quantification of rapid diagnostic test results. Usability testing suggests

Accessibility and usability OCW data: The UTPL OCW

Directory of Open Access Journals (Sweden)

Germania Rodríguez

2017-08-01

Full Text Available This data article provides a data description on article entitled “A framework for improving web accessibility and usability of Open Course Ware sites” [3] This Data in Brief presents the data obtained from the accessibility and usability evaluation of the UTPL OCW. The data obtained from the framework evaluation consists of the manual evaluation of the standards criteria and the automatic evaluation of the tools Google PageSpeed and Google Analytics. In addition, this article presents the synthetized tables from standards that are used by the framework to evaluate the accessibility and usability of OCW, and the questionnaires required to extract the data. As a result, the article also provides the data required to reproduce the evaluation of other OCW.

Adolescents' experience of a rapid HIV self-testing device in youth-friendly clinic settings in Cape Town South Africa: a cross-sectional community based usability study.

Science.gov (United States)

Smith, Philip; Wallace, Melissa; Bekker, Linda-Gail

2016-12-23

Introduction : Since HIV testing in South African adolescents and young adults is sub-optimal, the objective of the current study was to investigate the feasibility and acceptability of an HIV rapid self-testing device in adolescents and young people at the Desmond Tutu HIV Foundation Youth Centre and Mobile Clinic. Methods : Self-presenting adolescents and young adults were invited to participate in a study investigating the fidelity, usability and acceptability of the AtomoRapid HIV Rapid self-testing device. Trained healthcare workers trained participants to use the device before the participant conducted the HIV self-test with device usage instructions. The healthcare worker then conducted a questionnaire-based survey to assess outcomes. Results : Of the 224 enrolled participants between 16 and 24 years of age, 155 (69,2%) were female. Overall, fidelity was high; 216 (96,4%) participants correctly completed the test and correctly read and interpreted the HIV test result. There were eight (3,6%) user errors overall; six participants failed to prick their finger even though the lancet fired correctly. There were two user errors where participants failed to use the capillary tube correctly. Participants rated acceptability and usability highly, with debut testers giving significantly higher ratings for both. Younger participants gave significantly higher ratings of acceptability. Conclusions : Adolescents and young adults found HIV self-testing highly acceptable with the AtomoRapid and they used the device accurately. Further research should investigate how, where and when to deploy HIV self-testing as a means to accompany existing strategies in reaching the UNAIDS goal to test 90% of all individuals worldwide.

Training Software Developers in Usability Engineering: A Literature Review

DEFF Research Database (Denmark)

Bruun, Anders

2010-01-01

. This paper presents a comprehensive literature study of research conducted in this area, where 129 papers are analyzed in terms of research focus, empirical basis, types of training participants and training costs. Findings show a need for further empirical research regarding long term effects of training...... to fund usability specialists or comprehensive consultancy. Training of non-usability personnel in critical usability engineering methods has the potential of easing these challenges. It is, however, unknown how much and what kind of research that has been committed to novice training in UE methods......, training costs and training in user based evaluation methods....

HFIR Fuel Casting Support

Energy Technology Data Exchange (ETDEWEB)

Imhoff, Seth D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gibbs, Paul Jacob [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Solis, Eunice Martinez [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-09-28

Process exploration for fuel production for the High Flux Isotope Reactor (HFIR) using cast LEU-10wt.%Mo as an initial processing step has just begun. This project represents the first trials concerned with casting design and quality. The studies carried out over the course of this year and information contained in this report address the initial mold development to be used as a starting point for future operations. In broad terms, the final billet design is that of a solid rolling blank with an irregular octagonal cross section. The work covered here is a comprehensive view of the initial attempts to produce a sound casting. This report covers the efforts to simulate, predict, cast, inspect, and revise the initial mold design.

INVESTIGATION THE FITTING ACCURACY OF CAST AND SLM CO-CR DENTAL BRIDGES USING CAD SOFTWARE

Directory of Open Access Journals (Sweden)

Tsanka Dikova

2017-09-01

Full Text Available The aim of the present paper is to investigate the fitting accuracy of Co-Cr dental bridges, manufactured by three technologies, with the newly developed method using CAD software. The four-part dental bridges of Co-Cr alloys were produced by conventional casting of wax models, casting with 3D printed patterns and selective laser melting. The marginal and internal fit of dental bridges was studied out by two methods – silicone replica test and CAD software. As the silicone replica test characterizes with comparatively low accuracy, a new methodology for investigating the fitting accuracy of dental bridges was developed based on the SolidWorks CAD software. The newly developed method allows the study of the marginal and internal adaptation in unlimited directions and high accuracy. Investigation the marginal fit and internal adaptation of Co-Cr four-part dental bridges by the two methods show that the technological process strongly influences the fitting accuracy of dental restorations. The fitting accuracy of the bridges, cast with 3D printed patterns, is the highest, followed by the SLM and conventionally cast bridges. The marginal fit of the three groups of bridges is in the clinically acceptable range. The internal gap values vary in different regions – it is highest on the occlusal surfaces, followed by that in the marginal and axial areas. The higher fitting accuracy of the bridges, manufactured by casting with 3D printed patterns and SLM, compared to the conventionally cast bridges is a good precondition for their successful implementation in the dental offices and laboratories.

"I think it is right": a qualitative exploration of the acceptability and desired future use of oral swab and finger-prick HIV self-tests by lay users in KwaZulu-Natal, South Africa.

Science.gov (United States)

Knight, Lucia; Makusha, Tawanda; Lim, Jeanette; Peck, Roger; Taegtmeyer, Miriam; van Rooyen, Heidi

2017-09-18

The uptake of HIV testing has increased in sub-Saharan Africa over the past three decades. However, the proportion of people aware of their HIV status remains lower than required to change the pandemic. HIV self-testing (HIVST) may meet this gap. Assessment of readiness for and the acceptability of HIVST by lay users in South Africa is limited. This paper presents results from a formative study designed to assess the perceived usability and acceptability of HIVST among lay users using several self-test prototypes. Fifty lay users were purposively selected from rural and peri-urban KwaZulu-Natal, South Africa. Acceptability of HIVST was assessed using a simple post-test quantitative assessment tool addressing confidence, ease-of-use, intended future use and willingness to pay. In-depth qualitative interviews explored what participants felt about the HIVST and why, their willingness to recommend and how much they would pay for a test. The key finding is that there is high acceptability regardless of self-test prototype. Acceptability is framed by two domains: usability and perceived need. Perceived usability was explored through perceived ease of use, which, regardless of actual correct usage, was reported by many of the respondents. Acceptability is influenced by perceived need, expressed by many who felt that the need for the self-test to protect privacy and autonomy. Ease of access and widespread availability of the test, not at a significant cost, were also important factors. Many participants would recommend self-test use to others and also indicated that they would choose to conduct the test again if it was free while some also indicated being willing to buy a test. The positive response and readiness amongst lay users for an HIVST in this context prototype suggests that there would be a ready and willing market for HIVST. For scalability and sustainability usability, including access and availability that are here independent indications of acceptability

Sixty Years of Casting Research

Science.gov (United States)

Campbell, John

2015-11-01

The 60 years of solidification research since the publication of Chalmer's constitutional undercooling in 1953 has been a dramatic advance of understanding which has and continues to be an inspiration. In contrast, 60 years of casting research has seen mixed fortunes. One of its success stories relates to improvements in inoculation of gray irons, and another to the discovery of spheroidal graphite iron, although both of these can be classified as metallurgical rather than casting advances. It is suggested that true casting advances have dated from the author's lab in 1992 when a critical surface turbulence condition was defined for the first time. These last 20 years have seen the surface entrainment issues of castings developed to a sufficient sophistication to revolutionize the performance of light alloy and steel foundries. However, there is still a long way to go, with large sections of the steel and Ni-base casting industries still in denial that casting defects are important or even exist. The result has been that special ingots are still cast poorly, and shaped casting operations have suffered massive losses. For secondary melted and cast materials, electro-slag remelting has the potential to be much superior to expensive vacuum arc remelting, which has cost our aerospace and defense industries dearly over the years. This failure to address and upgrade our processing of liquid metals is a serious concern, since the principle entrainment defect, the bifilm, is seen as the principle initiator of cracks in metals; in general, bifilms are the Griffith cracks that initiate failures by cracking. A new generation of crack resistant metals and engineering structures can now be envisaged.

The evaluator effect in usability studies: Problem detection and severity judgments

DEFF Research Database (Denmark)

Jacobsen, Niels Ebbe; Hertzum, Morten; John, Bonnie E.

1998-01-01

Usability studies are commonly used in industry and applied in research as a yardstick for other usability evaluation methods. Though usability studies have been studied extensively, one potential threat to their reliability has been left virtually untouched: the evaluator effect. In this study......, four evaluators individually analyzed four videotaped usability test sessions. Only 20% of the 93 detected problems were detected by all evaluators, and 46% were detected by only a single evaluator. From the total set of 93 problems the evaluators individually selected the ten problems they considered...... most severe. None of the selected severe problems appeared on all four evaluators’ top-10 lists, and 4 of the 11 problems that were considered severe by more than one evaluator were only detected by one or two evaluators. Thus, both detection of usability problems and selection of the most severe...

Can Coolness Predict Technology Adoption? Effects of Perceived Coolness on User Acceptance of Smartphones with Curved Screens.

Science.gov (United States)

Kim, Ki Joon; Shin, Dong-Hee; Park, Eunil

2015-09-01

This study proposes an acceptance model for curved-screen smartphones, and explores how the sense of coolness induced by attractiveness, originality, subcultural appeal, and the utility of the curved screen promotes smartphone adoption. The results of structural equation modeling analyses (N = 246) show that these components of coolness (except utility) increase the acceptance of the technology by enhancing the smartphones' affectively driven qualities rather than their utilitarian ones. The proposed coolness model is then compared with the original technology acceptance model to validate that the coolness factors are indeed equally effective determinants of usage intention, as are the extensively studied usability factors such as perceived ease of use and usefulness.

Acceptance and Usability of OER in Indian Higher Education: An Investigation Using UTAUT Model

Science.gov (United States)

Padhi, Nayantara

2018-01-01

In the global movement towards open knowledge society, open educational resources (OER) have become a prominent contributor as a medium of education, research and training. In India, the phenomenon of OER is still in nascent stage. Although the country has been massively investing on growth and usage of ICT, it still requires acceptance of OER as…

Engineering design of centrifugal casting machine

Science.gov (United States)

Kusnowo, Roni; Gunara, Sophiadi

2017-06-01

Centrifugal casting is a metal casting process in which metal liquid is poured into a rotating mold at a specific temperature. Given round will generate a centrifugal force that will affect the outcome of the casting. Casting method is suitable in the manufacture of the casting cylinder to obtain better results. This research was performed to design a prototype machine by using the concept of centrifugal casting. The design method was a step-by-step systematic approach in the process of thinking to achieve the desired goal of realizing the idea and build bridges between idea and the product. Design process was commenced by the conceptual design phase and followed by the embodiment design stage and detailed design stage. With an engineering design process based on the method developed by G. E. Dieter, draft prototype of centrifugal casting machine with dimension of 550×450×400 mm, ¼ HP motor power, pulley and belt mechanism, diameter of 120-150mm, simultaneously with the characteristics of simple casting product, easy manufacture and maintenance, and relatively inexpensive, was generated.

Usability testing of interaction components: taking the message exchange as a measure of usability

NARCIS (Netherlands)

Brinkman, W.P.; Haakma, R.; Bouwhuis, D.G.; Jacob, R.J.K.; Limbourg, Q; Vanderdonckt, J.

2004-01-01

Component-based Software Engineering (CBSE) is concerned with the development of systems from reusable parts (components), and the development and maintenance of these parts. This study addresses the issue of usability testing in a CBSE environment, and specifically automatically measuring the

Clean Cast Steel Technology, Phase IV

Energy Technology Data Exchange (ETDEWEB)

Charles E. Bates

2003-02-24

The objective of the Clean Cast Steel Technology Program was to improve casting product quality by removing or minimizing oxide defects and to allow the production of higher integrity castings for high speed machining lines. Previous research has concentrated on macro-inclusions that break, chip, or crack machine tool cutters and drills and cause immediate shutdown of the machining lines. The overall goal of the project is to reduce the amount of surface macro-inclusions and improve the machinability of steel castings. Macro-inclusions and improve the machinability of steel castings. Macro-inclusions have been identified by industrial sponsors as a major barrier to improving the quality and marketability of steel castings.

OPTIMIZING USABILITY OF AN ECONOMIC DECISION SUPPORT TOOL: PROTOTYPE OF THE EQUIPT TOOL.

Science.gov (United States)

Cheung, Kei Long; Hiligsmann, Mickaël; Präger, Maximilian; Jones, Teresa; Józwiak-Hagymásy, Judit; Muñoz, Celia; Lester-George, Adam; Pokhrel, Subhash; López-Nicolás, Ángel; Trapero-Bertran, Marta; Evers, Silvia M A A; de Vries, Hein

2018-01-01

Economic decision-support tools can provide valuable information for tobacco control stakeholders, but their usability may impact the adoption of such tools. This study aims to illustrate a mixed-method usability evaluation of an economic decision-support tool for tobacco control, using the EQUIPT ROI tool prototype as a case study. A cross-sectional mixed methods design was used, including a heuristic evaluation, a thinking aloud approach, and a questionnaire testing and exploring the usability of the Return of Investment tool. A total of sixty-six users evaluated the tool (thinking aloud) and completed the questionnaire. For the heuristic evaluation, four experts evaluated the interface. In total twenty-one percent of the respondents perceived good usability. A total of 118 usability problems were identified, from which twenty-six problems were categorized as most severe, indicating high priority to fix them before implementation. Combining user-based and expert-based evaluation methods is recommended as these were shown to identify unique usability problems. The evaluation provides input to optimize usability of a decision-support tool, and may serve as a vantage point for other developers to conduct usability evaluations to refine similar tools before wide-scale implementation. Such studies could reduce implementation gaps by optimizing usability, enhancing in turn the research impact of such interventions.

Usability in product development practice; an exploratory case study comparing four markets.

Science.gov (United States)

van Kuijk, Jasper; van Driel, Liesbeth; van Eijk, Daan

2015-03-01

This study explored how usability was dealt with in four product development organizations active in different sectors: high-end automotive, professional printers and copiers, office coffee makers and fast moving consumer goods. The primary differentiators of the selected cases were whether they were targeting businesses or consumers and the degree of product complexity. Interviews with 19 product development practitioners were conducted, focussing on three topics: 1) the product development process and the integration of user involvement, 2) multidisciplinary teamwork, and 3) organizational attitude towards usability. Based on the interviews, context descriptions of the companies were created and barriers and enablers for usability were identified. To verify the findings and to discuss remaining issues a feedback workshop was held in which the primary contact from each company participated. The results indicate that differences in product-market combination lead to differences in organizational attitude towards usability. The prioritization of usability in an organization seems to be influenced by the degree of product complexity (complex products are more prone to suffer from usability issues) and whether developers think that usability is a purchase consideration for their clients. The product-market combination a company targets also affects the methods for user-centred design that a company can apply and that are relevant. What methods for user-centred design are used also seems to be influenced by the attitude towards usability: if usability is considered more important, methods that require more resources can be applied. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Using a fuzzy comprehensive evaluation method to determine product usability: A test case.

Science.gov (United States)

Zhou, Ronggang; Chan, Alan H S

2017-01-01

In order to take into account the inherent uncertainties during product usability evaluation, Zhou and Chan [1] proposed a comprehensive method of usability evaluation for products by combining the analytic hierarchy process (AHP) and fuzzy evaluation methods for synthesizing performance data and subjective response data. This method was designed to provide an integrated framework combining the inevitable vague judgments from the multiple stages of the product evaluation process. In order to illustrate the effectiveness of the model, this study used a summative usability test case to assess the application and strength of the general fuzzy usability framework. To test the proposed fuzzy usability evaluation framework [1], a standard summative usability test was conducted to benchmark the overall usability of a specific network management software. Based on the test data, the fuzzy method was applied to incorporate both the usability scores and uncertainties involved in the multiple components of the evaluation. Then, with Monte Carlo simulation procedures, confidence intervals were used to compare the reliabilities among the fuzzy approach and two typical conventional methods combining metrics based on percentages. This case study showed that the fuzzy evaluation technique can be applied successfully for combining summative usability testing data to achieve an overall usability quality for the network software evaluated. Greater differences of confidence interval widths between the method of averaging equally percentage and weighted evaluation method, including the method of weighted percentage averages, verified the strength of the fuzzy method.

Website Usability in Asia “From Within”

DEFF Research Database (Denmark)

Nawaz, Ather; Clemmensen, Torkil

2013-01-01

As the number of website users in Asia grows, there is an increasing need to gain an overview of human–computer interaction (HCI) research about users and websites in that context. This article presents an overview of HCI research on website usability in Asia “from within,” which outlines...... discusses the results and the need for a greater sensitivity to what is “local” and “from within” in HCI research and what this can add to the existing literature on website usability....

Usability challenges in an Ethiopian software development organization

DEFF Research Database (Denmark)

Teka, Degif; Dittrich, Yvonne; Kifle, Mesfin

2016-01-01

Usability and user centered design (UCD) are central to software development. In developing countries, the gap between IT development and the local use situation is larger than in western countries. However, usability is neither well addressed in software practice nor at the policy making level...... in Ethiopia. Software practitioners focus on functional requirements, meeting deadlines and budget. The software development industry in Ethiopia is in its early stage. The article aims at understanding usability practices in an Ethiopian software development company. Developers, system analysts, product...... configuration, their experience, cultural knowledge and common sense regarding the users' situation guided the design. Prototypes and fast delivery of working versions helped in getting user feedback even if early user focus proved to be a challenge as communication between developers and users suffered from...

Usability Briefing - a process model for healthcare facilities

DEFF Research Database (Denmark)

Fronczek-Munter, Aneta

2014-01-01

Background: In complex buildings with many types of users it can be difficult to satisfy the numerous, often contradictory requirements. Research in usability mostly focuses on evaluating products or facilities with users, after they were built. This paper is part of a PhD project “Usability...... with various users/stakeholders, using creative boundary objects at workshops.  Practical Implications: The research results have relevance to researchers, client organisations, facility managers and architects planning new complex facilities.  Research limitations: The proposed model is theoretical and needs...... briefing for hospitals”, where methods for capturing user needs and experiences at hospital facilities are investigated in order to feed into design processes and satisfy the users’ needs and maximise the effectiveness of facilities. Purpose: This paper introduces the concept of usability briefing...

Usability evaluation model for mobile e-book applications

Science.gov (United States)

Matraf, Munya Saleh Ba; Hussain, Azham

2017-10-01

Evaluation for mobile e-book applications are limited and did not address all the important usability measurements. Hence, this study aimed to identify the characteristics that affect user satisfaction on the usability of mobile e-book applications. Five characteristics that have a significant effect on the user satisfaction of mobile e-book applications have been identified namely readability, effectiveness, accessibility, efficiency, and navigation. A usability evaluation was conducted on three mobile e-book applications namely Adobe Acrobat Reader, Ebook Reader, and Amazon Kindle. 30 students from Universiti Utara Malaysia evaluated the mobile e-book applications and their satisfaction was measured using questionnaire. The outcomes discovered that the five characteristics have a significant positive relationship with user satisfaction. This provides insights into the main characteristics that increase user satisfaction.

Impact of as-cast structure on structure and properties of twin-roll cast AA8006 alloy

Energy Technology Data Exchange (ETDEWEB)

Slamova, M.; Ocenasek, V. [Vyzkumny Ustav Kovu, Panenske Brezany (Czechoslovakia); Juricek, Z.

2000-07-01

Sheet production by twin-roll casting (TRC) process is a well established practice in the aluminium industry because it offers several advantages in comparison with DC casting and hot rolling, esp. lower production and investment costs. Thin strips exhibiting a combination of good strength and high ductility are required for various applications and for this reason alloys with higher Fe and Mn content such as AA 8006 displace AA 1xxx or AA 8011 alloys. However, TRC of AA 8006 strips involves several problems, e.g. casting conditions and subsequent treatment procedures need fine tuning. The results of an investigation of the effect of casting conditions on structure and properties of AA 8006 strips are presented. The influence of casting speed, grain refiner addition, molten metal level in the tundish, tip setback and roll separating force was investigated. The impact of imperfect as-cast structure on structure and properties of thin strips in H22 and O tempers was evaluated and compared with strips from good as-cast material. (orig.)

Usability evaluation of augmented reality user interfaces in games and personal navigation assistants

OpenAIRE

Ivanec, Zorian

2017-01-01

This paper studies heuristic usability evaluation of user interfaces. The literature review distinguishes characteristics of augmented reality and smartphones, presents heuristic evaluation, PACMAD usability model, personal navigation assistants, video games, augmented reality and J. Nielsen usability heuristics. In research part, usability heuristics of related subject fields and design guidelines are combined. Created heuristics and control questionnaire are used for evaluation of augmented...

Investigating the effect of m-commerce design usability on customers' trust

Science.gov (United States)

Hussain, Azham Bin; Mahmood, Alaa Thamer; Naser, Raed Kamil

2017-10-01

User experience may vary from one user to another based on the design characteristics for processing a certain task. Our review of the literature revealed that there is a noticeable lack of studies on the effect of mobile or m-commerce design usability on customers' trust to perform certain activities. We investigated the effect of m-commerce design usability in terms of navigability, supportability, readability, creditability, and content relevant. A close-ended questionnaire was distributed to 20 customers who were asked to perform some tasks. The result showed that majority of the participants found m-commerce design usability to influence their trust of the app. The mentioned usability elements were found to positively influence customers' trust except for supportability. Our findings provide some insights to the m-commerce designers and developers and extend the current understanding about the potential of design usability in explaining users' usage behavior.

Relationship between casting modulus and grain size in cast A356 aluminium alloys

International Nuclear Information System (INIS)

Niklas, A; Abaunza, U; Fernández-Calvo, A I; Lacaze, J

2012-01-01

Microstructure of Al-Si alloy castings depends most generally on melt preparation and on the cooling rate imposed by the thermal modulus of the component. In the case of Al-Si alloys, emphasis is put during melt preparation on refinement of pro-eutectic (Al) grains and on modification of the Al-Si eutectic. Thermal analysis has been used since long to check melt preparation before casting, i.e. by analysis of the cooling curve during solidification of a sample cast in an instrumented cup. The conclusions drawn from such analysis are however valid for the particular cooling conditions of the cups. It thus appeared of interest to investigate how these conclusions could extrapolate to predict microstructure in complicated cast parts showing local changes in the solidification conditions. For that purpose, thermal analysis cups and instrumented sand and die castings with different thermal moduli and thus cooling rates have been made, and the whole set of cooling curves thus recorded has been analysed. A statistical analysis of the characteristic features of the cooling curves related to grain refinement in sand and die castings allowed determining the most significant parameters and expressing the cube of grain size as a polynomial of these parameters. After introduction of a further parameter quantifying melt refining an excellent correlation, with a R 2 factor of 0.99 was obtained.

The AutoProof Verifier: Usability by Non-Experts and on Standard Code

Directory of Open Access Journals (Sweden)

Carlo A. Furia

2015-08-01

Full Text Available Formal verification tools are often developed by experts for experts; as a result, their usability by programmers with little formal methods experience may be severely limited. In this paper, we discuss this general phenomenon with reference to AutoProof: a tool that can verify the full functional correctness of object-oriented software. In particular, we present our experiences of using AutoProof in two contrasting contexts representative of non-expert usage. First, we discuss its usability by students in a graduate course on software verification, who were tasked with verifying implementations of various sorting algorithms. Second, we evaluate its usability in verifying code developed for programming assignments of an undergraduate course. The first scenario represents usability by serious non-experts; the second represents usability on "standard code", developed without full functional verification in mind. We report our experiences and lessons learnt, from which we derive some general suggestions for furthering the development of verification tools with respect to improving their usability.

Training Software Developers and Designers to Conduct Usability Evaluations

Science.gov (United States)

Skov, Mikael Brasholt; Stage, Jan

2012-01-01

Many efforts to improve the interplay between usability evaluation and software development rely either on better methods for conducting usability evaluations or on better formats for presenting evaluation results in ways that are useful for software designers and developers. Both of these approaches depend on a complete division of work between…

Comparison of residual stresses in sand- and chill casting of ductile cast iron wind turbine main shafts

International Nuclear Information System (INIS)

Sonne, M R; Hattel, J H; Frandsen, J O

2015-01-01

In this work, simulations of pouring, solidification and cooling, and residual stress evolution of sand and chill cast wind turbine main shafts is performed. The models are made in the commercial software MAGMAsoft. As expected, the cooling rate of the sand casting is shown to be much lower than for the chill casting, resulting in a very course microstructure. From the simulations the nodule count is found to be 17 nodules per mm 2 and 159 nodules per mm 2 for the sand and chill casting, respectively, in the critical region of the main bearing seat. This is verified from nodule counts performed on the real cast main shafts. Residual stress evaluations show an overall increase of the maximum principal stress field for the chill casting, which is expected. However, the stresses are found to be in compression on the surface of the chill cast main shaft, which is unforeseen. (paper)

Comparison of residual stresses in sand- and chill casting of ductile cast iron wind turbine main shafts

DEFF Research Database (Denmark)

Sonne, Mads Rostgaard; Frandsen, J. O.; Hattel, Jesper Henri

2015-01-01

In this work, simulations of pouring, solidification and cooling, and residual stress evolution of sand and chill cast wind turbine main shafts is performed. The models are made in the commercial software MAGMAsoft. As expected, the cooling rate of the sand casting is shown to be much lower than...... for the chill casting, resulting in a very course microstructure.From the simulations the nodule count is found to be 17 nodules per mm2 and 159 nodules permm2 for the sand and chill casting, respectively, in the critical region of the main bearing seat.This is verified from nodule counts performed on the real...... cast main shafts. Residual stressevaluations show an overall increase of the maximum principal stress field for the chill casting,which is expected. However, the stresses are found to be in compression on the surface of thechill cast main shaft, which is unforeseen....

Ten factors to consider when developing usability scenarios and tasks for health information technology.

Science.gov (United States)

Russ, Alissa L; Saleem, Jason J

2018-02-01

The quality of usability testing is highly dependent upon the associated usability scenarios. To promote usability testing as part of electronic health record (EHR) certification, the Office of the National Coordinator (ONC) for Health Information Technology requires that vendors test specific capabilities of EHRs with clinical end-users and report their usability testing process - including the test scenarios used - along with the results. The ONC outlines basic expectations for usability testing, but there is little guidance in usability texts or scientific literature on how to develop usability scenarios for healthcare applications. The objective of this article is to outline key factors to consider when developing usability scenarios and tasks to evaluate computer-interface based health information technologies. To achieve this goal, we draw upon a decade of our experience conducting usability tests with a variety of healthcare applications and a wide range of end-users, to include healthcare professionals as well as patients. We discuss 10 key factors that influence scenario development: objectives of usability testing; roles of end-user(s); target performance goals; evaluation time constraints; clinical focus; fidelity; scenario-related bias and confounders; embedded probes; minimize risks to end-users; and healthcare related outcome measures. For each factor, we present an illustrative example. This article is intended to aid usability researchers and practitioners in their efforts to advance health information technologies. The article provides broad guidance on usability scenario development and can be applied to a wide range of clinical information systems and applications. Published by Elsevier Inc.

Optimizing the Gating System for Steel Castings

Directory of Open Access Journals (Sweden)

Jan Jezierski

2018-04-01

Full Text Available The article presents the attempt to optimize a gating system to produce cast steel castings. It is based on John Campbell’s theory and presents the original results of computer modelling of typical and optimized gating systems for cast steel castings. The current state-of-the-art in cast steel casting foundry was compared with several proposals of optimization. The aim was to find a compromise between the best, theoretically proven gating system version, and a version that would be affordable in industrial conditions. The results show that it is possible to achieve a uniform and slow pouring process even for heavy castings to preserve their internal quality.

Usability inspection to improve an electronic provincial medication repository.

Science.gov (United States)

Kitson, Nicole A; Price, Morgan; Bowen, Michael; Lau, Francis

2013-01-01

Medication errors are a significant source of actual and potential harm for patients. Community medication records have the potential to reduce medication errors, but they can also introduce unintended consequences when there is low fit to task (low cognitive fit). PharmaNet is a provincially managed electronic repository that contains the records for community-based pharmacy-dispensed medications in British Columbia. This research explores the usability of PharmaNet, as a representative community-based medication repository. We completed usability inspections of PharmaNet through vendor applications. Vendor participants were asked to complete activity-driven scenarios, which highlighted aspects of medication management workflow. Screen recording was later reviewed. Heuristics were applied to explore usability issues and improvement opportunities. Usability inspection was conducted with four PharmaNet applications. Ninety-six usability issues were identified; half of these had potential implications for patient safety. These were primarily related to login and logout procedures; display of patient name; display of medications; update and display of alert information; and the changing or discontinuation of medications. PharmaNet was designed primarily to support medication dispensing and billing activities by community pharmacies, but is also used to support care providers with monitoring and prescribing activities. As such, some of the features do not have a strong fit for other clinical activities. To improve fit, we recommend: having a Current Medications List and Displaying Medication Utilization Charts.

Wear resistance of cast iron

Directory of Open Access Journals (Sweden)

S. Pietrowski

2008-10-01

Full Text Available In this paper investigations of abrasive and adhesive wear resistance of different cast iron grades have been presented. Examinations showed, that the most advantageous pair of materials is the cast iron – the hardened steel with low-tempered martensite. It was found, that martensitic nodular cast iron with carbides is the most resistant material.

National Metal Casting Research Institute final report. Volume 2, Die casting research

Energy Technology Data Exchange (ETDEWEB)

Jensen, D. [University of Northern Iowa, Cedar Falls, IA (United States). Dept. of Industrial Technology] [comp.

1994-06-01

Four subprojects were completed: development and evaluation of die coatings, accelerated die life characterization of die materials, evaluation of fluid flow and solidification modeling programs, selection and characterization of Al-based die casting alloys, and influence of die materials and coatings on die casting quality.

Usability Studies and User-Centered Design in Digital Libraries

Science.gov (United States)

Comeaux, David J.

2008-01-01

Digital libraries continue to flourish. At the same time, the principles of user-centered design and the practice of usability testing have been growing in popularity, spreading their influence into the library sphere. This article explores the confluence of these two trends by surveying the current literature on usability studies of digital…

The evaluation of working casts prepared from digital impressions.

Science.gov (United States)

Hwang, Y C; Park, Y S; Kim, H K; Hong, Y S; Ahn, J S; Ryu, J J

2013-01-01

The aim of this study is to evaluate the reproducibility of working casts of a digital impression system by comparing them with the original, virtual, and rapid prototyping casts. A total of 54 cast sets in clinically stable occlusion were used. They were scanned by an iTero intraoral scanner and converted into STL format virtual casts. Rapid prototyping casts and polyurethane casts were fabricated from the iTero milling system based on the virtual casts. Several horizontal and vertical measurements were performed from the four types of casts, that is, original stone casts, virtual casts, rapid prototyping casts, and polyurethane casts of iTero. Measurement error, intraclass correlation coefficient (ICC), and differences among the casts were calculated and compared. Casts from iTero milling machines exhibited greater dimensional differences and lower ICC values than did other casts. In addition, many of the measurements of the iTero working casts showed statistically significant differences in comparison to the three other types of casts. In contrast, there were no statistically significant differences between the virtual and original casts. Virtual casts made by the iTero intraoral scanner exhibited excellent reproducibility. However, the casts from the iTero milling machine showed greater dimensional differences and lower reproducibility compared to other types of casts.

Temperature and microstructure characteristics of silumin casting AlSi9 made with investment casting method

Directory of Open Access Journals (Sweden)

S. Pietrowski

2011-07-01

Full Text Available This work presents the research result of the temperature distribution and the microstructure in certain parts of the field-glass body frame casting made from silumin AlSi9 using the investment casting method in the ceramic mould. It was proved that the highest temperature of the silumin appears in the sprue in which the silumin is in the liquid-solid state, though the process of silumin crystallization in the casting is finished. It was stated that in certain elements of the casting the side opposite to the runner crystallizes and cools fastest. The differences in the rate of crystalline growth and cooling of certain casting elements cause differ- ent microstructure in them which can also influence the mechanic properties.It is necessary to state that the temperature of the initial heating of the ceramic mold equal to 60oC guarantees obtaining of the castings without defects and of little porosity. Incomplete modification of the silumin with strontium causes silica precipitation to appear close to the spherical ones.

Web-based education for low-literate parents in Neonatal Intensive Care Unit: development of a website and heuristic evaluation and usability testing.

Science.gov (United States)

Choi, Jeungok; Bakken, Suzanne

2010-08-01

Low health literacy has been associated with poor health-related outcomes. The purposes are to report the development of a website for low-literate parents in the Neonatal Intensive Care Unit (NICU), and the findings of heuristic evaluation and a usability testing of this website. To address low literacy of NICU parents, multimedia educational Website using visual aids (e.g., pictographs, photographs), voice-recorded text message in addition to a simplified text was developed. The text was created at the 5th grade readability level. The heuristic evaluation was conducted by three usability experts using 10 heuristics. End-users' performance was measured by counting the time spent completing tasks and number of errors, as well as recording users' perception of ease of use and usefulness (PEUU) in a sample of 10 NICU parents. Three evaluators identified 82 violations across the 10 heuristics. All violations, however, received scores visuals on the Website were well accepted by low-literate users and agreement of visuals with text improved understanding of the educational materials over that with text alone. The findings suggest that using concrete and realistic pictures and pictographs with clear captions would maximize the benefit of visuals. One emerging theme was "simplicity" in design (e.g., limited use of colors, one font type and size), content (e.g., avoid lengthy text), and technical features (e.g., limited use of pop-ups). The heuristic evaluation by usability experts and the usability test with actual users provided complementary expertise, which can give a richer assessment of a design for low literacy Website. These results facilitated design modification and implementation of solutions by categorizing and prioritizing the usability problems.

Segregation in cast products

Indian Academy of Sciences (India)

Unknown

The agreement with experimental data is mostly qualitative. The paper also ... For example, a high degree of positive segregation in the central region .... solute in a cast product, important ones being: size of casting, rate of solidification, mode.

Usability study of youtube websites for Malaysian teenagers

Science.gov (United States)

Razak, Mohd Nur Faiz Abd; Hussain, Azham; Hamdi, Mohd Maizan Fishol

2017-10-01

Nowadays, YouTube is the 3rd most visited website in the world. It was created for users to search, watch and share video. Statistics show that YouTube run in more than 88 countries and support 76 different languages which covered almost 95% of Internet population globally. Therefore, a usability study is for specific type of users such as based on gender, range of age and country is considered a must for this kind of top website. In this study, we focus on YouTube website usability for Malaysian teenagers that are currently schooling in boarding school with limited access of Internet. It was done in a controlled lab environment with proper devices and software as MacBook, LCD Monitor, and WhatPulse heat map tracker. The evaluation was made based on usability metrics: ease of use, usefulness and satisfaction of users with combination of recording videos, mouse and keyboard heat map and questionnaires. Findings show that most of the respondents just use YouTube for video watching only while ignoring other features in the same time. There are difficulties in using it at the first moment but could catch up in short time. It shows how usable YouTube website especially in the learnability and memorability aspects.

Comparison of CTA and Textual Feedback in Usability Testing for Malaysian Users

DEFF Research Database (Denmark)

Sivaji, Ashok; Clemmensen, Torkil; Nielsen, Søren Feodor

Usability moderators found that the concurrent think-aloud (CTA) method has some cultural limitation that impacts usability testing with Malaysian users. This gives rise to proposing a new method called textual feedback. The research question is to determine whether there are any differences...... in usability defects from the concurrent think-aloud (CTA) method (Condition 2) and textual feedback method (Condition 1) within the same group of Malaysian users. A pair-wise t-test was used, whereby users were subjected to performing usability task using both methods. Results reveal that we can reject...

APPLICATION OF POLYSTYRENE FOAM CORE FUSIBLE PATTERNS IN PRODUCTION OF GAS TURBINES’ CAST PARTS

Directory of Open Access Journals (Sweden)

O. I. Shinsky

2016-01-01

Full Text Available The task of replacing the LVM dissolves polystyrene molding on models is at the present time, technologically, economically and environmentally promising from the point of view of industrial applications for gas turbine plants in Ukraine. The authors proposed and tested manufacturing process of casting ceramic molds way to remove the polystyrene model of the dissolution of her organic solvents. Kinetic parameters of the process of dissolving and removing patterns of degradation products the polystyrene in the group of solvents depending on the type and amount of polystyrene were identified. The absence of surface defects of castings, reduction of roughness, increased their accuracy class in comparison to accepted technological regulations of the process of production, which reduced the cost of machined parts and increased utilization of expensive heat-resistant alloys were produced.

Genetic structure of Rajaka caste and affinities with other caste populations of Andhra Pradesh, India.

Science.gov (United States)

Parvatheesam, C; Babu, B V; Babu, M C

1997-01-01

The present study gives an account of the genetic structure in terms of distribution of a few genetic markers, viz., A1A2B0, Rh(D), G6PD deficiency and haemoglobin among the Rajaka caste population of Andhra Pradesh, India. The genetic relationships of the Rajaka caste with other Andhra caste populations were investigated in terms of genetic distance, i.e., Sq B (mn) of Balakrishnan and Sanghvi. Relatively lesser distance was established between the Rajaka and two Panchama castes. Also, the pattern of genetic distance corroborates the hierarchical order of the Hindu varna system.

A literature review about usability evaluation methods for e-learning platforms.

Science.gov (United States)

Freire, Luciana Lopes; Arezes, Pedro Miguel; Campos, José Creissac

2012-01-01

The usability analysis of information systems has been the target of several research studies over the past thirty years. These studies have highlighted a great diversity of points of view, including researchers from different scientific areas such as Ergonomics, Computer Science, Design and Education. Within the domain of information ergonomics, the study of tools and methods used for usability evaluation dedicated to E-learning presents evidence that there is a continuous and dynamic evolution of E-learning systems, in many different contexts -academics and corporative. These systems, also known as LMS (Learning Management Systems), can be classified according to their educational goals and their technological features. However, in these systems the usability issues are related with the relationship/interactions between user and system in the user's context. This review is a synthesis of research project about Information Ergonomics and embraces three dimensions, namely the methods, models and frameworks that have been applied to evaluate LMS. The study also includes the main usability criteria and heuristics used. The obtained results show a notorious change in the paradigms of usability, with which it will be possible to discuss about the studies carried out by different researchers that were focused on usability ergonomic principles aimed at E-learning.

Evaluating Usability of E-Learning Systems in Universities

OpenAIRE

Nicholas Kipkurui Kiget; Professor G. Wanyembi; Anselemo Ikoha Peters

2014-01-01

The use of e-learning systems has increased significantly in the recent times. E-learning systems are supplementing teaching and learning in universities globally. Kenyan universities have adopted e-learning technologies as means for delivering course content. However despite adoption of these systems, there are considerable challenges facing the usability of the systems. Lecturers and students have different perceptions in regard to the usability of e-learning systems. The aim of this study ...

White cast iron with a nano-eutectic microstructure and high tensile strength and considerable ductility prepared by an aluminothermic reaction casting

International Nuclear Information System (INIS)

La, Peiqing; Wei, Fuan; Hu, Sulei; Li, Cuiling; Wei, Yupeng

2013-01-01

A white cast iron with nano-eutectic microstructure was prepared by an aluminothermic reaction casting. Microstructures of the cast iron were investigated by optical microscope (OM), electron probe micro-analyzer (EPMA), scanning electron microscope (SEM) and X-ray diffraction (XRD). Mechanical properties of the cast iron were tested. The results showed that the cast iron consisted of pearlite and cementite phases. Lamellar spacing of the pearlite phase was in a range of 110–275 nm and much smaller than that of the Ni-Hard 2 cast iron. Hardness of the cast iron was 552 Hv, tensile strength was 383 MPa, total elongation was 3% and compressive strength was 2224 MPa. Tensile strength and hardness of the cast iron was same to Ni-Hard 2 cast iron, besides the ductility was much better than that of the Ni-Hard 2 cast iron which is much expensive than the cast iron.

Method for casting thin metal objects

Science.gov (United States)

Pehrson, Brandon P; Moore, Alan F

2015-04-14

Provided herein are various embodiments of systems for casting thin metal plates and sheets. Typical embodiments include layers of mold cavities that are oriented vertically for casting the metal plates. In some embodiments, the mold cavities include a beveled edge such that the plates that are cast have a beveled edge. In some embodiments, the mold cavities are filled with a molten metal through an open horizontal edge of the cavity. In some embodiments, the mold cavities are filled through one or more vertical feed orifices. Further disclosed are methods for forming a thin cast metal plate or sheet where the thickness of the cast part is in a range from 0.005 inches to 0.2 inches, and the surface area of the cast part is in a range from 16 square inches to 144 square inches.

Adolescents’ experience of a rapid HIV self-testing device in youth-friendly clinic settings in Cape Town South Africa: a cross-sectional community based usability study

Science.gov (United States)

Smith, Philip; Wallace, Melissa; Bekker, Linda-Gail

2016-01-01

Abstract Introduction: Since HIV testing in South African adolescents and young adults is sub-optimal, the objective of the current study was to investigate the feasibility and acceptability of an HIV rapid self-testing device in adolescents and young people at the Desmond Tutu HIV Foundation Youth Centre and Mobile Clinic. Methods: Self-presenting adolescents and young adults were invited to participate in a study investigating the fidelity, usability and acceptability of the AtomoRapid HIV Rapid self-testing device. Trained healthcare workers trained participants to use the device before the participant conducted the HIV self-test with device usage instructions. The healthcare worker then conducted a questionnaire-based survey to assess outcomes. Results: Of the 224 enrolled participants between 16 and 24 years of age, 155 (69,2%) were female. Overall, fidelity was high; 216 (96,4%) participants correctly completed the test and correctly read and interpreted the HIV test result. There were eight (3,6%) user errors overall; six participants failed to prick their finger even though the lancet fired correctly. There were two user errors where participants failed to use the capillary tube correctly. Participants rated acceptability and usability highly, with debut testers giving significantly higher ratings for both. Younger participants gave significantly higher ratings of acceptability. Conclusions: Adolescents and young adults found HIV self-testing highly acceptable with the AtomoRapid and they used the device accurately. Further research should investigate how, where and when to deploy HIV self-testing as a means to accompany existing strategies in reaching the UNAIDS goal to test 90% of all individuals worldwide. PMID:28406597

A Comparison of What Is Part of Usability Testing in Three Countries

Science.gov (United States)

Clemmensen, Torkil

The cultural diversity of users of technology challenges our methods for usability evaluation. In this paper we report and compare three ethnographic interview studies of what is a part of a standard (typical) usability test in a company in Mumbai, Beijing and Copenhagen. At each of these three locations, we use structural and contrast questions do a taxonomic and paradigm analysis of a how a company performs a usability test. We find similar parts across the three locations. We also find different results for each location. In Mumbai, most parts of the usability test are not related to the interactive application that is tested, but to differences in user characteristics, test preparation, method, and location. In Copenhagen, considerations about the client's needs are part of a usability test. In Beijing, the only varying factor is the communication pattern and relation to the user. These results are then contrasted in a cross cultural matrix to identify cultural themes that can help interpret results from existing laboratory research in usability test methods.

An Evaluation of the Design and Usability of a Novel Robotic Bilateral Arm Rehabilitation Device for Patients with Stroke

Directory of Open Access Journals (Sweden)

Yu-Cheng Pei

2017-07-01

Full Text Available Study designCase series.Evidence levelIV (case series.IntroductionRobot-assisted therapy for upper limb rehabilitation is an emerging research topic and its design process must integrate engineering, neurological pathophysiology, and clinical needs.Purpose of the studyThis study developed/evaluated the usefulness of a novel rehabilitation device, the MirrorPath, designed for the upper limb rehabilitation of patients with hemiplegic stroke.MethodsThe process follows Tseng’s methodology for innovative product design and development, namely two stages, device development and usability assessment. During the development process, the design was guided by patients’ rehabilitation needs as defined by patients and their therapists. The design applied synchronic movement of the bilateral upper limbs, an approach that is compatible with the bilateral movement therapy and proprioceptive neuromuscular facilitation theories. MirrorPath consists of a robotic device that guides upper limb movement linked to a control module containing software controlling the robotic movement.ResultsFive healthy subjects were recruited in the pretest, and 4 patients, 4 caregivers, and 4 therapists were recruited in the formal test for usability. All recruited subjects were allocated to the test group, completed the evaluation, and their data were all analyzed. The total system usability scale score obtained from the patients, caregivers, and therapists was 71.8 ± 11.9, indicating a high level of usability and product acceptance.Discussion and conclusionFollowing a standard development process, we could yield a design that meets clinical needs. This low-cost device provides a feasible platform for carrying out robot-assisted bilateral movement therapy of patients with hemiplegic stroke.Clinical Trial Registrationidentifier NCT02698605.

Modelling of flow phenomena during DC casting

NARCIS (Netherlands)

Zuidema, J.

2005-01-01

Modelling of Flow Phenomena during DC Casting Jan Zuidema The production of aluminium ingots, by semi-continuous casting, is a complex process. DC Casting stands for direct chill casting. During this process liquid aluminium transforms to solid aluminium while cooling down. This is not an

Pilot implementation Driven by Effects Specifications and Formative Usability Evaluation

DEFF Research Database (Denmark)

Barlach, Anders; Hertzum, Morten; Simonsen, Jesper

2013-01-01

This chapter reports on the usability-engineering work performed throughout the pilot implementation of an Electronic Healthcare Record (EHR). The case describes and analyzes the use of pilot implementations to formatively evaluate whether the usability of the EHR meets the effects specified for ...

Methods in Mapping Usability of Malaysia’s Shopping Centre

Directory of Open Access Journals (Sweden)

Abdul Ghani Aida Affina

2016-01-01

Full Text Available With more than 200 number of shopping centre in Klang Valley itself, we the consumer actually have vast of choices. Instead of the machineries varieties from the lower class product till the posh one, each of those shopping centres eventually offers the typical product same as others. Those shopping centers are competing with each other and in great endeavour to attract more consumers, to visit and spend. As for the visitor, the typical product and boring ambience seems similar in all malls, and is looking something beyond the standard. Something that promising quality embedded in shopping centre which evokes the various emotions of the user along their journey in malls. This quality is known as usability. Usability; as defined generally is a global user’s experience response with product, environment, service or facilities. It is an assessment in extracting the qualities of shopping centre design. In mapping it, there are a few synthesizing methods to implement it. Therefore, this paper purposely to review the method that been used in usability of Malaysia’s shopping centre research with a few references on previous research done in usability assessment by predecessor’s scholars. With the accentuation on three elements that anchoring what the usability is: effectiveness, efficient and satisfaction, it is hope that this overview can lead other researcher in portraying its relationship with the quality and ‘user friendly’ design of shopping centre.

Mechanical properties of as-cast microalloyed steels produced via investment casting

International Nuclear Information System (INIS)

Najafi, H.; Rassizadehghani, J.; Norouzi, S.

2011-01-01

Tensile and room temperature Charpy V-notch impact tests were used to evaluate the variations in the as-cast mechanical properties of a low-carbon steel produced via shell mould investment casting and containing combinations of vanadium, niobium and titanium. Tensile results indicate that the yield strength and ultimate tensile strength (UTS) have increased up to respectively 615 MPa and 770 MPa due to the fine-scale microalloy precipitates in the microalloyed samples. Room temperature impact test results show that while addition of vanadium individually has not changed the impact energy, Nb has decreased it considerably. However, examination of fracture surfaces reveals that all microalloyed samples have failed by transgranular cleavage. Based on the transmission electron microscope (TEM) studies, it seems that carbonitrides being greater than 50 nm in size and formed along prior austenite grain boundaries before γ transformation are responsible for the observed reduction in impact energies and brittle fracture. In comparison to sand mould casting, the yield and UTS obtained from investment casting are superior. Furthermore, although the impact energies of Nb-containing alloys are approximately the same as those obtained from sand moulds, the impact energy of the alloy containing only vanadium has improved considerably.

Methods uncovering usability issues in medication-related alerting functions: results from a systematic review.

Science.gov (United States)

Marcilly, Romaric; Vasseur, Francis; Ammenwerth, Elske; Beuscart-Zephir, Marie-Catherine

2014-01-01

This paper aims at listing the methods used to evaluate the usability of medication-related alerting functions and at knowing what type of usability issues those methods allow to detect. A sub-analysis of data from this systematic review has been performed. Methods applied in the included papers were collected. Then, included papers were sorted in four types of evaluation: "expert evaluation", "user- testing/simulation", "on site observation" and "impact studies". The types of usability issues (usability flaws, usage problems and negative outcomes) uncovered by those evaluations were analyzed. Results show that a large set of methods are used. The largest proportion of papers uses "on site observation" evaluation. This is the only evaluation type for which every kind of usability flaws, usage problems and outcomes are detected. It is somehow surprising that, in a usability systematic review, most of the papers included use a method that is not often presented as a usability method. Results are discussed about the opportunity to provide usability information collected after the implementation of the technology during their design process, i.e. before their implementation.

Integrated System Validation Usability Questionnaire: Computerized Procedures

International Nuclear Information System (INIS)

Garcés, Ma. I.; Torralba, B.

2015-01-01

The Research and Development (R&D) project on “Theoretical and Methodological Approaches to Integrated System Validation of Control Rooms, 2014-2015”, in which the research activities described in this report are framed, has two main objectives: to develop the items for an usability methodology conceived as a part of the measurement framework for performance-based control room evaluation that the OECD Halden Reactor Project will test in the experiments planned for 2015; and the statistical analysis of the data generated in the experimental activities of the Halden Man-Machine Laboratory (HAMMLAB) facility, with previous usability questionnaires, in 2010 and 2011. In this report, the procedure designed to meet the first goal of the project is described, in particular, the process followed to identify the items related to operating procedures, both computer and paper-based, one of the elements to be included in the usability questionnaire. Three phases are performed, in the first one, the approaches developed by the United States Nuclear Regulatory Commission, NRC, are reviewed, the models used by the nuclear industry and their technical support organizations, mainly, the Electric Power Research Institute, EPRI, are analyzed, and scientist advances are also explored. In the remaining stages, general and specific guidelines for computerized and paper-based procedures are compared and criteria for the preliminary selection of the items that should be incorporated into the usability questionnaire are defined. This proposal will be reviewed and adapted by the Halden Reactor Project to the design of the specific experiments performed in HAMLAB.

Spatial Bimetallic Castings Manufactured from Iron Alloys

Directory of Open Access Journals (Sweden)

M. Cholewa

2007-07-01

Full Text Available In this paper a conception for manufacturing method of skeleton castings with composite features was shown. Main application of such castings are the working organs of machines subjected to intensive abrasive and erosive wear. Skeleton geometry was based on three-dimensional cubic net consisting of circular connectors and nodes joining 6 connectors according to Cartesian co-ordinate system. Dimension of an elementary cell was equal to 10 mm and diameter of single connector was equal to 5 mm. For bimetallic castings preparation two Fe based alloys were used: L25SHMN cast steel for skeleton substrate and ZlCr15NiMo cast iron for working part of the casting. In presented work obtained structure was analyzed with indication of characteristic regions. Authors described phenomena occurring at the alloys interface and phases in transition zone. A thesis was formulated concerning localization of transition zone at the cast iron matrix – cast steel reinforcement interface. Direction of further studies were indicated.

Modelling of Filling, Microstructure Formation, Local Mechanical Properties and Stress – Strain Development in High-Pressure Die Cast Aluminium Castings

DEFF Research Database (Denmark)

Kotas, Petr; Hattel, Jesper Henri; Thorborg, Jesper

2009-01-01

.e. whether the casting is based on cast iron- or aluminium-alloys. The distribution of local properties in a casting might vary substantially which makes it complex to optimize the casting with good accuracy. Often, mechanical simulations of the load situation are based on the assumption that the cast...... in an aluminium alloy is considered including simulation of the entire casting process with emphasis on microstructure formation related to mechanical properties such as elastic modulus, yield stress, ultimate strength and elongation as well as residual stresses. Subsequently, the casting is subjected to service...... loads and the results of this analysis are discussed in relation to the predicted local properties as well as the residual stresses originating from the casting simulation....

The current status of usability studies of information technologies in China: a systematic study.

Science.gov (United States)

Lei, Jianbo; Xu, Lufei; Meng, Qun; Zhang, Jiajie; Gong, Yang

2014-01-01

To systematically review and analyze the current status and characteristics of usability studies in China in the field of information technology in general and in the field of healthcare in particular. We performed a quantitative literature analysis in three major Chinese academic databases and one English language database using Chinese search terms equivalent to the concept of usability. Six hundred forty-seven publications were selected for analysis. We found that in China the literature on usability in the field of information technology began in 1994 and increased thereafter. The usability definitions from ISO 9241-11:1998 and Nielsen (1993) have been widely recognized and cited. Authors who have published several publications are rare. Fourteen journals have a publishing rate over 1%. Only nine publications about HIT were identified. China's usability research started relatively late. There is a lack of organized research teams and dedicated usability journals. High-impact theoretical studies are scarce. On the application side, no original and systematic research frameworks have been developed. The understanding and definition of usability is not well synchronized with international norms. Besides, usability research in HIT is rare. More human and material resources need to be invested in China's usability research, particularly in HIT.

Mobile App Delivery of the EORTC QLQ-C30 Questionnaire to Assess Health-Related Quality of Life in Oncological Patients: Usability Study.

Science.gov (United States)

Kessel, Kerstin A; Vogel, Marco Me; Alles, Anna; Dobiasch, Sophie; Fischer, Hanna; Combs, Stephanie E

2018-02-20

Mobile apps are evolving in the medical field. However, ongoing discussions have questioned whether such apps are really valuable and whether patients will accept their use in day-to-day clinical life. Therefore, we initiated a usability study in our department. We present our results of the first app prototype and patient testing of health-related quality of life (HRQoL) assessment in oncological patients. We developed an app prototype for the iOS operating system within eight months in three phases: conception, initial development, and pilot testing. For the HRQoL assessment, we chose to implement only the European Organization for Research and Treatment of Cancer (EORTC) Quality of Life Questionnaire-Core 30 (QLQ-C30; German version 3). Usability testing was conducted for three months. Participation was voluntary and pseudonymized. After completion of the QLQ-C30 questionnaire using iPads provided by our department, we performed a short survey with 10 questions. This survey inquired about patients' opinions regarding general aspects, including technical advances in medicine, mobile and app assistance during cancer treatment, and the app-specific functions (eg, interface and navigation). After logging into the app, the user can choose between starting a questionnaire, reviewing answers (administrators only), and logging out. The questionnaire is displayed with the same information, questions, and answers as on the original QLQ-C30 sheet. No alterations in wording were made. Usability was tested with 81 patients; median age was 55 years. The median time for completing the HRQoL questionnaire on the iPad was 4.0 minutes. Of all participants, 84% (68/81) owned a mobile device. Similarly, 84% (68/81) of participants would prefer a mobile version of the HRQoL questionnaire instead of a paper-based version. Using the app in daily life during and after cancer treatment would be supported by 83% (67/81) of participants. In the prototype version of the app, data were

Usability principles to design mobile workplace learning content

Directory of Open Access Journals (Sweden)

Alessia Messuti

2015-04-01

Full Text Available The article describes the design of a mobile workplace learning tool for trainers of the International Training Centre of the International Labour Organization. The motivation behind is to provide trainers with a practical tool that will enable them to recall information at the moment of need and continue to learn in context. On this purpose a set of visual augmented reality cards was created, taking into consideration the fundamental mobile learning and usability principles. The nature of the article is empirical as it reports an experiment carried out with trainers which aimed at testing cards usability and learnability. Results show that the integration of both online and offline strategies was perceived as an added value as trainers could choose to retrieve information as they mostly like; finally, it also resulted in high usability scores, an aspect that contributes to their effectiveness at the workplace.

On the Usability of Spoken Dialogue Systems

DEFF Research Database (Denmark)

Larsen, Lars Bo

 This work is centred on the methods and problems associated with defining and measuring the usability of Spoken Dialogue Systems (SDS). The starting point is the fact that speech based interfaces has several times during the last 20 years fallen short of the high expectations and predictions held...... by industry, researchers and analysts. Several studies in the literature of SDS indicate that this can be ascribed to a lack of attention from the speech technology community towards the usability of such systems. The experimental results presented in this work are based on a field trial with the OVID home...

Cast dielectric composite linear accelerator

Science.gov (United States)

Sanders, David M [Livermore, CA; Sampayan, Stephen [Manteca, CA; Slenes, Kirk [Albuquerque, NM; Stoller, H M [Albuquerque, NM

2009-11-10

A linear accelerator having cast dielectric composite layers integrally formed with conductor electrodes in a solventless fabrication process, with the cast dielectric composite preferably having a nanoparticle filler in an organic polymer such as a thermosetting resin. By incorporating this cast dielectric composite the dielectric constant of critical insulating layers of the transmission lines of the accelerator are increased while simultaneously maintaining high dielectric strengths for the accelerator.

Does Branding Need Web Usability? A Value-Oriented Empirical Study

Science.gov (United States)

Bolchini, Davide; Garzotto, Franca; Sorce, Fabio

Does usability of a web-based communication artifact affect brand, i.e., the set of beliefs, emotions, attitudes, or qualities that people mentally associate to the entity behind that artifact? Intuitively, the answer is “yes”: usability is a fundamental aspect of the quality of the experience with a website, and a “good” experience with a “product” or its reifications tends to translate into “good” brand perception. To date, however, the existence of a connection between web usability and brand perception is shown through anecdotic arguments, and is not supported by published systematic research. This paper discusses a study that empirically investigates this correlation in a more rigorous, analytical, and replicable way. Our main contribution is twofold: on the one hand, we provide empirical evidence to the heuristic principle that web usability influences branding, and we do that through four between subjects controlled experiments that involved 120 subjects. On the other hand, we inform the study with a systematic value-oriented approach to the user experience, and thus provide a conceptual framework that can be reused in other experimental settings, either for replicating our study, or for designing similar studies focusing on the correlation of web branding vs. design factors other than usability.

Standards for Instrument Migration When Implementing Paper Patient-Reported Outcome Instruments Electronically: Recommendations from a Qualitative Synthesis of Cognitive Interview and Usability Studies.

Science.gov (United States)

Muehlhausen, Willie; Byrom, Bill; Skerritt, Barbara; McCarthy, Marie; McDowell, Bryan; Sohn, Jeremy

2018-01-01

To synthesize the findings of cognitive interview and usability studies performed to assess the measurement equivalence of patient-reported outcome (PRO) instruments migrated from paper to electronic formats (ePRO), and make recommendations regarding future migration validation requirements and ePRO design best practice. We synthesized findings from all cognitive interview and usability studies performed by a contract research organization between 2012 and 2015: 53 studies comprising 68 unique instruments and 101 instrument evaluations. We summarized study findings to make recommendations for best practice and future validation requirements. Five studies (9%) identified minor findings during cognitive interview that may possibly affect instrument measurement properties. All findings could be addressed by application of ePRO best practice, such as eliminating scrolling, ensuring appropriate font size, ensuring suitable thickness of visual analogue scale lines, and providing suitable instructions. Similarly, regarding solution usability, 49 of the 53 studies (92%) recommended no changes in display clarity, navigation, operation, and completion without help. Reported usability findings could be eliminated by following good product design such as the size, location, and responsiveness of navigation buttons. With the benefit of accumulating evidence, it is possible to relax the need to routinely conduct cognitive interview and usability studies when implementing minor changes during instrument migration. Application of design best practice and selecting vendor solutions with good user interface and user experience properties that have been assessed in a representative group may enable many instrument migrations to be accepted without formal validation studies by instead conducting a structured expert screen review. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Evaluation of porosity in Al alloy die castings

Directory of Open Access Journals (Sweden)

M. Říhová

2012-01-01

Full Text Available Mechanical properties of an Al-alloy die casting depend significantly on its structural properties. Porosity in Al-alloy castings is one of the most frequent causes of waste castings. Gas pores are responsible for impaired mechanical-technological properties of cast materials. On the basis of a complex evaluation of experiments conducted on AlSi9Cu3 alloy samples taken from the upper engine block which was die- cast with and without local squeeze casting it can be said that castings manufactured without squeeze casting exhibit maximum porosity in the longitudinal section. The area without local squeeze casting exhibits a certain reduction in mechanical properties and porosity increased to as much as 5%. However, this still meets the norms set by SKODA AUTO a.s.

Some Theoretical Considerations on Caste

Directory of Open Access Journals (Sweden)

Madhusudan Subedi

2014-05-01

Full Text Available Caste as a system of social stratification was an encompassing system in the past. There was reciprocal system of exchange goods and services. With time, occupation and mode of generation of livelihood of various caste groups changed, and the traditional form of jajmani system fizzled out. This paper provides an account of changing perspectives of caste relations in social science writing and political discourse. The discourse of caste has been shifted from ritual hierarchy and social discrimination to an instrument to mobilize people for economic and political gain. DOI: http://dx.doi.org/10.3126/dsaj.v7i0.10437 Dhaulagiri Journal of Sociology and Anthropology Vol. 7, 2013; 51-86

Fabrication of sacrificial anode cathodic protection through casting method

International Nuclear Information System (INIS)

Mohd Sharif Sattar; Muhamad Daud; Siti Radiah Mohd Kamarudin; Azali Muhamad; Zaiton Selamat; Rusni Rejab

2007-01-01

Aluminum is one of the few metals that can be cast by all of the processes used in casting metals. These processes consist of die casting, permanent mold casting, sand casting (green sand and dry sand), plaster casting, investment casting, and continuous casting. Other processes such as lost foam, squeeze casting, and hot isostatic pressing are also used. Permanent mold casting method was selected in which used for fabricating of sacrificial anode cathodic protection. This product was ground for surface finished and fabricated in the cylindrical form and reinforced with carbon steel at a center of the anode. (Author)

Effect of copper addition and section thickness on the mechanical and physical properties of grey cast iron

International Nuclear Information System (INIS)

Malik, F.A.; Zahid, M.; Hassan, M.A.; Sheikh, M.A.; Alam, S.; Qazi, M.A.

1995-01-01

Copper is a graphitizer at the stage of solidification and it acts as antiferritizer during transformation cooling range. Due to this, copper additions to grey cast iron prevent at formation of free ferrite in heavy sections. It also reduces the chilling in thin sections, therefore uniform structure is imparted to grey iron by the copper addition. This gives the appropriate strength and hardness properties to grey iron. Thus copper addition gives certain advantages in relation to the machinability and wear resistance which are important for many engineering properties requires by high duty cast iron. The application of copper as allying element is acceptable due to its price and availability as compared to other alloying elements. (author)

14 CFR 29.621 - Casting factors.

Science.gov (United States)