WorldWideScience

Sample records for acceptable model fit

  1. Parametric fitting of data obtained from detectors with finite resolution and limited acceptance

    International Nuclear Information System (INIS)

    Gagunashvili, N.D.

    2011-01-01

    A goodness-of-fit test for fitting of a parametric model to data obtained from a detector with finite resolution and limited acceptance is proposed. The parameters of the model are found by minimization of a statistic that is used for comparing experimental data and simulated reconstructed data. Numerical examples are presented to illustrate and validate the fitting procedure.

  2. The effects of asymmetric directional microphone fittings on acceptance of background noise.

    Science.gov (United States)

    Kim, Jong S; Bryan, Melinda Freyaldenhoven

    2011-05-01

    The effects of asymmetric directional microphone fittings (i.e., an omnidirectional microphone on one ear and a directional microphone on the other) on speech understanding in noise and acceptance of background noise were investigated in 15 full-time hearing aid users. Subjects were fitted binaurally with four directional microphone conditions (i.e., binaural omnidirectional, right asymmetric directional, left asymmetric directional and binaural directional microphones) using Siemens Intuis Directional behind-the-ear hearing aids. Speech understanding in noise was assessed using the Hearing in Noise Test, and acceptance of background noise was assessed using the Acceptable Noise Level procedure. Speech was presented from 0° while noise was presented from 180° azimuth. The results revealed that speech understanding in noise improved when using asymmetric directional microphones compared to binaural omnidirectional microphone fittings and was not significantly hindered compared to binaural directional microphone fittings. The results also revealed that listeners accepted more background noise when fitted with asymmetric directional microphones as compared to binaural omnidirectional microphones. Lastly, the results revealed that the acceptance of noise was further increased for the binaural directional microphones when compared to the asymmetric directional microphones, maximizing listeners' willingness to accept background noise in the presence of noise. Clinical implications will be discussed.

  3. Contrast Gain Control Model Fits Masking Data

    Science.gov (United States)

    Watson, Andrew B.; Solomon, Joshua A.; Null, Cynthia H. (Technical Monitor)

    1994-01-01

    We studied the fit of a contrast gain control model to data of Foley (JOSA 1994), consisting of thresholds for a Gabor patch masked by gratings of various orientations, or by compounds of two orientations. Our general model includes models of Foley and Teo & Heeger (IEEE 1994). Our specific model used a bank of Gabor filters with octave bandwidths at 8 orientations. Excitatory and inhibitory nonlinearities were power functions with exponents of 2.4 and 2. Inhibitory pooling was broad in orientation, but narrow in spatial frequency and space. Minkowski pooling used an exponent of 4. All of the data for observer KMF were well fit by the model. We have developed a contrast gain control model that fits masking data. Unlike Foley's, our model accepts images as inputs. Unlike Teo & Heeger's, our model did not require multiple channels for different dynamic ranges.

  4. Expanding the Technology Acceptance Model with the Inclusion of Trust, Social Influence, and Health Valuation to Determine the Predictors of German Users’ Willingness to Continue using a Fitness App : A Structural Equation Modeling Approach

    NARCIS (Netherlands)

    Beldad, Ardion Daroca; Hegner, Sabrina

    2017-01-01

    According to one market research, fitness or running apps are hugely popular in Germany. Such a trend prompts the question concerning the factors influencing German users’ intention to continue using a specific fitness app. To address the research question, the expanded Technology Acceptance Model

  5. A Mutual Acculturation Model of Multicultural Campus Climate and Acceptance of Diversity

    Science.gov (United States)

    Simmons, Samantha; Wittig, Michele A.; Grant, Sheila K.

    2010-01-01

    This study examines the relationship between college students’ perceptions of their campus’ multicultural climate and their acceptance of racial/ethnic diversity. A two-mediator model, based on acculturation principles, was successfully fit to survey data from 434 college students of diverse racial/ethnic heritage. Results showed that valuing positive interactions with members of ethnocultural groups other than one’s own is a positive mediator and strength of ethnocultural identity is a (much less important) negative mediator of the relationship between student perceptions of multicultural campus programming and personal acceptance of diverse racial/ethnic groups. Furthermore, each mediator independently contributed to the prediction of such acceptance. Overall, the model accounts for about 25% of the variance in acceptance of diversity and was a better fit to the data than a reverse path model. Follow-up analyses, separately by ethnic group, showed that perceptions of campus programming predicted acceptance of diversity for the White subsample, but not for the Latino subsample. Nevertheless, the two acculturation-related constructs were important for both groups, with the model accounting for 28% and 24% of their respective variances in acceptance of diversity. Practical implications are drawn. PMID:21058809

  6. Is the Nintendo Wii Fit really acceptable to older people?: a discrete choice experiment

    Science.gov (United States)

    2011-01-01

    Background Interactive video games such as the Nintendo Wii Fit are increasingly used as a therapeutic tool in health and aged care settings however, their acceptability to older people is unclear. The aim of this study was to determine the acceptability of the Nintendo Wii Fit as a therapy tool for hospitalised older people using a discrete choice experiment (DCE) before and after exposure to the intervention. Methods A DCE was administered to 21 participants in an interview style format prior to, and following several sessions of using the Wii Fit in physiotherapy. The physiotherapist prescribed the Wii Fit activities, supervised and supported the patient during the therapy sessions. Attributes included in the DCE were: mode of therapy (traditional or using the Wii Fit), amount of therapy, cost of therapy program and percentage of recovery made. Data was analysed using conditional (fixed-effects) logistic regression. Results Prior to commencing the therapy program participants were most concerned about therapy time (avoiding programs that were too intensive), and the amount of recovery they would make. Following the therapy program, participants were more concerned with the mode of therapy and preferred traditional therapy programs over programs using the Wii Fit. Conclusions The usefulness of the Wii Fit as a therapy tool with hospitalised older people is limited not only by the small proportion of older people who are able to use it, but by older people's preferences for traditional approaches to therapy. Mainstream media portrayals of the popularity of the Wii Fit with older people may not reflect the true acceptability in the older hospitalised population. PMID:22011360

  7. Is the Nintendo Wii Fit really acceptable to older people?: a discrete choice experiment

    Directory of Open Access Journals (Sweden)

    Burgess Leonie

    2011-10-01

    Full Text Available Abstract Background Interactive video games such as the Nintendo Wii Fit are increasingly used as a therapeutic tool in health and aged care settings however, their acceptability to older people is unclear. The aim of this study was to determine the acceptability of the Nintendo Wii Fit as a therapy tool for hospitalised older people using a discrete choice experiment (DCE before and after exposure to the intervention. Methods A DCE was administered to 21 participants in an interview style format prior to, and following several sessions of using the Wii Fit in physiotherapy. The physiotherapist prescribed the Wii Fit activities, supervised and supported the patient during the therapy sessions. Attributes included in the DCE were: mode of therapy (traditional or using the Wii Fit, amount of therapy, cost of therapy program and percentage of recovery made. Data was analysed using conditional (fixed-effects logistic regression. Results Prior to commencing the therapy program participants were most concerned about therapy time (avoiding programs that were too intensive, and the amount of recovery they would make. Following the therapy program, participants were more concerned with the mode of therapy and preferred traditional therapy programs over programs using the Wii Fit. Conclusions The usefulness of the Wii Fit as a therapy tool with hospitalised older people is limited not only by the small proportion of older people who are able to use it, but by older people's preferences for traditional approaches to therapy. Mainstream media portrayals of the popularity of the Wii Fit with older people may not reflect the true acceptability in the older hospitalised population.

  8. Critical elements on fitting the Bayesian multivariate Poisson Lognormal model

    Science.gov (United States)

    Zamzuri, Zamira Hasanah binti

    2015-10-01

    Motivated by a problem on fitting multivariate models to traffic accident data, a detailed discussion of the Multivariate Poisson Lognormal (MPL) model is presented. This paper reveals three critical elements on fitting the MPL model: the setting of initial estimates, hyperparameters and tuning parameters. These issues have not been highlighted in the literature. Based on simulation studies conducted, we have shown that to use the Univariate Poisson Model (UPM) estimates as starting values, at least 20,000 iterations are needed to obtain reliable final estimates. We also illustrated the sensitivity of the specific hyperparameter, which if it is not given extra attention, may affect the final estimates. The last issue is regarding the tuning parameters where they depend on the acceptance rate. Finally, a heuristic algorithm to fit the MPL model is presented. This acts as a guide to ensure that the model works satisfactorily given any data set.

  9. A Comparison of Competing Models for Understanding Industrial Organization’s Acceptance of Cloud Services

    Directory of Open Access Journals (Sweden)

    Shui-Lien Chen

    2018-03-01

    Full Text Available Cloud computing is the next generation in computing, and the next natural step in the evolution of on-demand information technology services and products. However, only a few studies have addressed the adoption of cloud computing from an organizational perspective, which have not proven whether the research model is the best-fitting model. The purpose of this paper is to construct research competing models (RCMs and determine the best-fitting model for understanding industrial organization’s acceptance of cloud services. This research integrated the technology acceptance model and the principle of model parsimony to develop four cloud service adoption RCMs with enterprise usage intention being used as a proxy for actual behavior, and then compared the RCMs using structural equation modeling (SEM. Data derived from a questionnaire-based survey of 227 firms in Taiwan were tested against the relationships through SEM. Based on the empirical study, the results indicated that, although all four RCMs had a high goodness of fit, in both nested and non-nested structure comparisons, research competing model A (Model A demonstrated superior performance and was the best-fitting model. This study introduced a model development strategy that can most accurately explain and predict the behavioral intention of organizations to adopt cloud services.

  10. Family support and acceptance, gay male identity formation, and psychological adjustment: a path model.

    Science.gov (United States)

    Elizur, Y; Ziv, M

    2001-01-01

    While heterosexist family undermining has been demonstrated to be a developmental risk factor in the life of persons with same-gender orientation, the issue of protective family factors is both controversial and relatively neglected. In this study of Israeli gay males (N = 114), we focused on the interrelations of family support, family acceptance and family knowledge of gay orientation, and gay male identity formation, and their effects on mental health and self-esteem. A path model was proposed based on the hypotheses that family support, family acceptance, family knowledge, and gay identity formation have an impact on psychological adjustment, and that family support has an effect on gay identity formation that is mediated by family acceptance. The assessment of gay identity formation was based on an established stage model that was streamlined for cross-cultural practice by defining three basic processes of same-gender identity formation: self-definition, self-acceptance, and disclosure (Elizur & Mintzer, 2001). The testing of our conceptual path model demonstrated an excellent fit with the data. An alternative model that hypothesized effects of gay male identity on family acceptance and family knowledge did not fit the data. Interpreting these results, we propose that the main effect of family support/acceptance on gay identity is related to the process of disclosure, and that both general family support and family acceptance of same-gender orientation play a significant role in the psychological adjustment of gay men.

  11. Fitting PAC spectra with stochastic models: PolyPacFit

    Energy Technology Data Exchange (ETDEWEB)

    Zacate, M. O., E-mail: zacatem1@nku.edu [Northern Kentucky University, Department of Physics and Geology (United States); Evenson, W. E. [Utah Valley University, College of Science and Health (United States); Newhouse, R.; Collins, G. S. [Washington State University, Department of Physics and Astronomy (United States)

    2010-04-15

    PolyPacFit is an advanced fitting program for time-differential perturbed angular correlation (PAC) spectroscopy. It incorporates stochastic models and provides robust options for customization of fits. Notable features of the program include platform independence and support for (1) fits to stochastic models of hyperfine interactions, (2) user-defined constraints among model parameters, (3) fits to multiple spectra simultaneously, and (4) any spin nuclear probe.

  12. Testing Usability and Acceptability of a Web Application to Promote Physical Activity (iCanFit) Among Older Adults

    Science.gov (United States)

    Goldberg, Daniel; Dahlke, Deborah Vollmer; Ory, Marcia G; Cargill, Jessica S; Coughlin, Rachel; Hernandez, Edgar; Kellstedt, Debra K; Peres, S Camille

    2014-01-01

    Background Most older Americans do not exercise regularly and many have chronic conditions. Among an increasing number of fitness mobile and Web apps, few are designed for older adults with chronic conditions despite high ownership rates of mobile tools and Internet access in this population. We designed a mobile-enabled Web app, iCanFit, to promote physical activity in this population. Objective This study aimed to test the usability and acceptability of iCanFit among older adults in a community setting. Methods A total of 33 older adults (aged 60 to 82 years) were recruited from communities to test iCanFit. Of these 33, 10 participants completed the usability testing in a computer room of a senior community center. A research assistant timed each Web application task and observed user navigation behavior using usability metrics. The other 23 participants used the website on their own devices at home and provided feedback after 2-3 weeks by completing a user-experience survey assessing ease of use, helpfulness, and satisfaction with iCanFit. Results Participants completed all 15 tasks on the iCanFit site in an average of 31 (SD 6.9) minutes; some tasks required more time or needed assistance. Participants’ comments were addressed to improve the site’s senior friendliness and ease of use. In the user-experience survey, participants reported high levels of usefulness and satisfaction. More than 56% (13/23) of participants indicated they would continue using the program and recommend it to their families or friends. Conclusions Testing usability and acceptability is a very important step in developing age-appropriate and user-friendly Web apps, especially for older adults. Testing usability and acceptability in a community setting can help reveal users’ experiences and feedback in a real-life setting. Our study suggested that older adults had a high degree of acceptance of iCanFit and could use it easily. The efficacy trial of iCanFit is currently underway

  13. Understanding social acceptance of electricity generation sources

    International Nuclear Information System (INIS)

    Bronfman, Nicolás C.; Jiménez, Raquel B.; Arévalo, Pilar C.; Cifuentes, Luis A.

    2012-01-01

    Social acceptability is a determinant factor in the failure or success of the government's decisions about which electricity generation sources will satisfy the growing demand for energy. The main goal of this study was to validate a causal trust-acceptability model for electricity generation sources. In the model, social acceptance of an energy source is directly caused by perceived risk and benefit and also by social trust in regulatory agencies (both directly and indirectly, through perceived risk and benefit). Results from a web-based survey of Chilean university students demonstrated that data for energy sources that are controversial in Chilean society (fossil fuels, hydro, and nuclear power) fit the hypothesized model, whereas data for non conventional renewable energy sources (solar, wind, geothermal and tidal) did not. Perceived benefit had the greatest total effect on acceptability, thus emerging as a key predictive factor of social acceptability of controversial electricity generation sources. Further implications for regulatory agencies are discussed. - Highlights: ► We tested a causal trust-acceptability model for electricity generation sources in Chile. ► Data for controversial energy sources in the Chilean society (fossil fuels, hydro and nuclear power) fit the hypothesized model. ► Data for non conventional renewable energy sources did not fit the data. ► Perceived benefit showed the greatest total effect on acceptability.

  14. Theory development in health care informatics: Information and communication technology acceptance model (ICTAM) improves the explanatory and predictive power of technology acceptance models.

    Science.gov (United States)

    An, Ji-Young

    2006-01-01

    The purpose of this web-based study was to explain and predict consumers' acceptance and usage behavior of Internet health information and services. Toward this goal, the Information and Communication Technology Acceptance Model (ICTAM) was developed and tested. Individuals who received a flyer through the LISTSERV of HealthGuide were eligible to participate. The study population was eighteen years old and older who had used Internet health information and services for a minimum of 6 months. For the analyses, SPSS (version 13.0) and AMOS (version 5.0) were employed. More than half of the respondents were women (n = 110, 55%). The average age of the respondents was 35.16 years (S.D. = 10.07). A majority reported at least some college education (n = 126, 63%). All of the observed factors accounted for 75.53% of the total variance explained. The fit indices of the structural model were within an acceptable range: chi2/df = 2.38 (chi2 = 1786.31, df = 752); GFI = .71; RMSEA = .08; CFI = .86; NFI = .78. The results of this study provide empirical support for the continued development of ICTAM in the area of health consumers' information and communication technology acceptance.

  15. The technology acceptance model: predicting nurses' intention to use telemedicine technology (eICU).

    Science.gov (United States)

    Kowitlawakul, Yanika

    2011-07-01

    The purposes of this study were to determine factors and predictors that influence nurses' intention to use the eICU technology, to examine the applicability of the Technology Acceptance Model in explaining nurses' intention to use the eICU technology in healthcare settings, and to provide psychometric evidence of the measurement scales used in the study. The study involved 117 participants from two healthcare systems. The Telemedicine Technology Acceptance Model was developed based on the original Technology Acceptance Model that was initially developed by Fred Davis in 1986. The eICU Acceptance Survey was used as an instrument for the study. Content validity was examined, and the reliability of the instrument was tested. The results show that perceived usefulness is the most influential factor that influences nurses' intention to use the eICU technology. The principal factors that influence perceived usefulness are perceived ease of use, support from physicians, and years working in the hospital. The model fit was reasonably adequate and able to explain 58% of the variance (R = 0.58) in intention to use the eICU technology with the nursing sample.

  16. Technology, Demographic Characteristics and E-Learning Acceptance: A Conceptual Model Based on Extended Technology Acceptance Model

    Science.gov (United States)

    Tarhini, Ali; Elyas, Tariq; Akour, Mohammad Ali; Al-Salti, Zahran

    2016-01-01

    The main aim of this paper is to develop an amalgamated conceptual model of technology acceptance that explains how individual, social, cultural and organizational factors affect the students' acceptance and usage behaviour of the Web-based learning systems. More specifically, the proposed model extends the Technology Acceptance Model (TAM) to…

  17. A Stepwise Fitting Procedure for automated fitting of Ecopath with Ecosim models

    Directory of Open Access Journals (Sweden)

    Erin Scott

    2016-01-01

    Full Text Available The Stepwise Fitting Procedure automates testing of alternative hypotheses used for fitting Ecopath with Ecosim (EwE models to observation reference data (Mackinson et al. 2009. The calibration of EwE model predictions to observed data is important to evaluate any model that will be used for ecosystem based management. Thus far, the model fitting procedure in EwE has been carried out manually: a repetitive task involving setting >1000 specific individual searches to find the statistically ‘best fit’ model. The novel fitting procedure automates the manual procedure therefore producing accurate results and lets the modeller concentrate on investigating the ‘best fit’ model for ecological accuracy.

  18. The issue of statistical power for overall model fit in evaluating structural equation models

    Directory of Open Access Journals (Sweden)

    Richard HERMIDA

    2015-06-01

    Full Text Available Statistical power is an important concept for psychological research. However, examining the power of a structural equation model (SEM is rare in practice. This article provides an accessible review of the concept of statistical power for the Root Mean Square Error of Approximation (RMSEA index of overall model fit in structural equation modeling. By way of example, we examine the current state of power in the literature by reviewing studies in top Industrial-Organizational (I/O Psychology journals using SEMs. Results indicate that in many studies, power is very low, which implies acceptance of invalid models. Additionally, we examined methodological situations which may have an influence on statistical power of SEMs. Results showed that power varies significantly as a function of model type and whether or not the model is the main model for the study. Finally, results indicated that power is significantly related to model fit statistics used in evaluating SEMs. The results from this quantitative review imply that researchers should be more vigilant with respect to power in structural equation modeling. We therefore conclude by offering methodological best practices to increase confidence in the interpretation of structural equation modeling results with respect to statistical power issues.

  19. Manual Development and Pilot Testing of a Mindfulness- and Acceptance-Based Intervention for Increasing Cardiorespiratory Fitness in Sedentary Adults

    OpenAIRE

    Martin, Emily Cecile

    2012-01-01

    The aim of this research project was to conduct a manual development study and an open clinical trial in order to demonstrate the feasibility and efficacy of a mindfulness and acceptance based intervention for increasing cardiorespiratory fitness (CRF) in sedentary adults through adherence to a fitness walking program. Development of the treatment manual followed a 3-phase process (literature review and initial draft preparation, expert review, draft revision) based on expert systems analysis...

  20. Introducing the fit-criteria assessment plot - A visualisation tool to assist class enumeration in group-based trajectory modelling.

    Science.gov (United States)

    Klijn, Sven L; Weijenberg, Matty P; Lemmens, Paul; van den Brandt, Piet A; Lima Passos, Valéria

    2017-10-01

    Background and objective Group-based trajectory modelling is a model-based clustering technique applied for the identification of latent patterns of temporal changes. Despite its manifold applications in clinical and health sciences, potential problems of the model selection procedure are often overlooked. The choice of the number of latent trajectories (class-enumeration), for instance, is to a large degree based on statistical criteria that are not fail-safe. Moreover, the process as a whole is not transparent. To facilitate class enumeration, we introduce a graphical summary display of several fit and model adequacy criteria, the fit-criteria assessment plot. Methods An R-code that accepts universal data input is presented. The programme condenses relevant group-based trajectory modelling output information of model fit indices in automated graphical displays. Examples based on real and simulated data are provided to illustrate, assess and validate fit-criteria assessment plot's utility. Results Fit-criteria assessment plot provides an overview of fit criteria on a single page, placing users in an informed position to make a decision. Fit-criteria assessment plot does not automatically select the most appropriate model but eases the model assessment procedure. Conclusions Fit-criteria assessment plot is an exploratory, visualisation tool that can be employed to assist decisions in the initial and decisive phase of group-based trajectory modelling analysis. Considering group-based trajectory modelling's widespread resonance in medical and epidemiological sciences, a more comprehensive, easily interpretable and transparent display of the iterative process of class enumeration may foster group-based trajectory modelling's adequate use.

  1. Keep Using My Health Apps: Discover Users' Perception of Health and Fitness Apps with the UTAUT2 Model.

    Science.gov (United States)

    Yuan, Shupei; Ma, Wenjuan; Kanthawala, Shaheen; Peng, Wei

    2015-09-01

    Health and fitness applications (apps) are one of the major app categories in the current mobile app market. Few studies have examined this area from the users' perspective. This study adopted the Extended Unified Theory of Acceptance and Use of Technology (UTAUT2) Model to examine the predictors of the users' intention to adopt health and fitness apps. A survey (n=317) was conducted with college-aged smartphone users at a Midwestern university in the United States. Performance expectancy, hedonic motivations, price value, and habit were significant predictors of users' intention of continued usage of health and fitness apps. However, effort expectancy, social influence, and facilitating conditions were not found to predict users' intention of continued usage of health and fitness apps. This study extends the UTATU2 Model to the mobile apps domain and provides health professions, app designers, and marketers with the insights of user experience in terms of continuously using health and fitness apps.

  2. Integrated Model for E-Learning Acceptance

    Science.gov (United States)

    Ramadiani; Rodziah, A.; Hasan, S. M.; Rusli, A.; Noraini, C.

    2016-01-01

    E-learning is not going to work if the system is not used in accordance with user needs. User Interface is very important to encourage using the application. Many theories had discuss about user interface usability evaluation and technology acceptance separately, actually why we do not make it correlation between interface usability evaluation and user acceptance to enhance e-learning process. Therefore, the evaluation model for e-learning interface acceptance is considered important to investigate. The aim of this study is to propose the integrated e-learning user interface acceptance evaluation model. This model was combined some theories of e-learning interface measurement such as, user learning style, usability evaluation, and the user benefit. We formulated in constructive questionnaires which were shared at 125 English Language School (ELS) students. This research statistics used Structural Equation Model using LISREL v8.80 and MANOVA analysis.

  3. Measured, modeled, and causal conceptions of fitness

    Science.gov (United States)

    Abrams, Marshall

    2012-01-01

    This paper proposes partial answers to the following questions: in what senses can fitness differences plausibly be considered causes of evolution?What relationships are there between fitness concepts used in empirical research, modeling, and abstract theoretical proposals? How does the relevance of different fitness concepts depend on research questions and methodological constraints? The paper develops a novel taxonomy of fitness concepts, beginning with type fitness (a property of a genotype or phenotype), token fitness (a property of a particular individual), and purely mathematical fitness. Type fitness includes statistical type fitness, which can be measured from population data, and parametric type fitness, which is an underlying property estimated by statistical type fitnesses. Token fitness includes measurable token fitness, which can be measured on an individual, and tendential token fitness, which is assumed to be an underlying property of the individual in its environmental circumstances. Some of the paper's conclusions can be outlined as follows: claims that fitness differences do not cause evolution are reasonable when fitness is treated as statistical type fitness, measurable token fitness, or purely mathematical fitness. Some of the ways in which statistical methods are used in population genetics suggest that what natural selection involves are differences in parametric type fitnesses. Further, it's reasonable to think that differences in parametric type fitness can cause evolution. Tendential token fitnesses, however, are not themselves sufficient for natural selection. Though parametric type fitnesses are typically not directly measurable, they can be modeled with purely mathematical fitnesses and estimated by statistical type fitnesses, which in turn are defined in terms of measurable token fitnesses. The paper clarifies the ways in which fitnesses depend on pragmatic choices made by researchers. PMID:23112804

  4. Fitting neuron models to spike trains

    Directory of Open Access Journals (Sweden)

    Cyrille eRossant

    2011-02-01

    Full Text Available Computational modeling is increasingly used to understand the function of neural circuitsin systems neuroscience.These studies require models of individual neurons with realisticinput-output properties.Recently, it was found that spiking models can accurately predict theprecisely timed spike trains produced by cortical neurons in response tosomatically injected currents,if properly fitted. This requires fitting techniques that are efficientand flexible enough to easily test different candidate models.We present a generic solution, based on the Brian simulator(a neural network simulator in Python, which allowsthe user to define and fit arbitrary neuron models to electrophysiological recordings.It relies on vectorization and parallel computing techniques toachieve efficiency.We demonstrate its use on neural recordings in the barrel cortex andin the auditory brainstem, and confirm that simple adaptive spiking modelscan accurately predict the response of cortical neurons. Finally, we show how a complexmulticompartmental model can be reduced to a simple effective spiking model.

  5. Induced subgraph searching for geometric model fitting

    Science.gov (United States)

    Xiao, Fan; Xiao, Guobao; Yan, Yan; Wang, Xing; Wang, Hanzi

    2017-11-01

    In this paper, we propose a novel model fitting method based on graphs to fit and segment multiple-structure data. In the graph constructed on data, each model instance is represented as an induced subgraph. Following the idea of pursuing the maximum consensus, the multiple geometric model fitting problem is formulated as searching for a set of induced subgraphs including the maximum union set of vertices. After the generation and refinement of the induced subgraphs that represent the model hypotheses, the searching process is conducted on the "qualified" subgraphs. Multiple model instances can be simultaneously estimated by solving a converted problem. Then, we introduce the energy evaluation function to determine the number of model instances in data. The proposed method is able to effectively estimate the number and the parameters of model instances in data severely corrupted by outliers and noises. Experimental results on synthetic data and real images validate the favorable performance of the proposed method compared with several state-of-the-art fitting methods.

  6. Predetermining acceptable noise limits of EXAFS spectra in the limit of stochastic noise

    International Nuclear Information System (INIS)

    Hu, Yung-Jin; Booth, Corwin H

    2009-01-01

    The effect of stochastic noise on Extended X-ray Absorption Fine Structure (EXAFS) data measurement, analysis, and fitting is discussed. Stochastic noise reduces the ability to uniquely fit a calculated model to measured EXAFS data. Such noise can be reduced by common methods that increase the signal-to-noise ratio; however, these methods are not always practical. Therefore, predetermined, quantitative knowledge of the level of acceptable stochastic noise when fitting for a particular model system is essential in maximizing the chances of a successful EXAFS experiment and minimizing wasted beamtime. This paper outlines a method to estimate, through simulation, the acceptable level of stochastic noise in EXAFS spectra that still allows a successful test of a proposed model compound.

  7. EXercising with Computers in Later Life (EXCELL) - pilot and feasibility study of the acceptability of the Nintendo® WiiFit in community-dwelling fallers.

    Science.gov (United States)

    Williams, Marie A; Soiza, Roy L; Jenkinson, Alison McE; Stewart, Alison

    2010-09-13

    Falls management programmes have been instituted to attempt to reduce falls. This pilot study was undertaken to determine whether the Nintendo® WiiFit was a feasible and acceptable intervention in community-dwelling older fallers. Community-dwelling fallers over 70 years were recruited and attended for computer-based exercises (n = 15) or standard care (n = 6). Balance and fear of falling were assessed at weeks 0, 4 and 12. Participants were interviewed on completion of the study to determine whether the intervention was acceptable.Eighty percent of participants attended 75% or more of the exercise sessions. An improvement in Berg Score was seen at four weeks (p = 0.02) and in Wii Age at 12 weeks (p = 0.03) in the intervention group. There was no improvement in balance scores in the standard care group. WiiFit exercise is acceptable in self-referred older people with a history of falls. The WiiFit has the potential to improve balance but further work is required. ClinicalTrials.gov - NCT01082042.

  8. EXercising with Computers in Later Life (EXCELL - pilot and feasibility study of the acceptability of the Nintendo® WiiFit in community-dwelling fallers

    Directory of Open Access Journals (Sweden)

    Williams Marie A

    2010-09-01

    Full Text Available Abstract Background Falls management programmes have been instituted to attempt to reduce falls. This pilot study was undertaken to determine whether the Nintendo® WiiFit was a feasible and acceptable intervention in community-dwelling older fallers. Findings Community-dwelling fallers over 70 years were recruited and attended for computer-based exercises (n = 15 or standard care (n = 6. Balance and fear of falling were assessed at weeks 0, 4 and 12. Participants were interviewed on completion of the study to determine whether the intervention was acceptable. Eighty percent of participants attended 75% or more of the exercise sessions. An improvement in Berg Score was seen at four weeks (p = 0.02 and in Wii Age at 12 weeks (p = 0.03 in the intervention group. There was no improvement in balance scores in the standard care group. Conclusion WiiFit exercise is acceptable in self-referred older people with a history of falls. The WiiFit has the potential to improve balance but further work is required. Trial Registration ClinicalTrials.gov - NCT01082042

  9. Technology Acceptance Model: A Survey of Literature

    Directory of Open Access Journals (Sweden)

    Priyanka Surendran

    2013-07-01

    Full Text Available The technology acceptance model has been a theory that is most widely used to explain an individual’s acceptance of an information system. This study has reviewed numerous literatures available in this area. The different studies in this area were evaluated to understand the modifications that were done on this model. The paper then tries to provide an insight on future trends in the technology acceptance model.

  10. Analytical fitting model for rough-surface BRDF.

    Science.gov (United States)

    Renhorn, Ingmar G E; Boreman, Glenn D

    2008-08-18

    A physics-based model is developed for rough surface BRDF, taking into account angles of incidence and scattering, effective index, surface autocovariance, and correlation length. Shadowing is introduced on surface correlation length and reflectance. Separate terms are included for surface scatter, bulk scatter and retroreflection. Using the FindFit function in Mathematica, the functional form is fitted to BRDF measurements over a wide range of incident angles. The model has fourteen fitting parameters; once these are fixed, the model accurately describes scattering data over two orders of magnitude in BRDF without further adjustment. The resulting analytical model is convenient for numerical computations.

  11. Development of a health information technology acceptance model using consumers' health behavior intention.

    Science.gov (United States)

    Kim, Jeongeun; Park, Hyeoun-Ae

    2012-10-01

    For effective health promotion using health information technology (HIT), it is mandatory that health consumers have the behavioral intention to measure, store, and manage their own health data. Understanding health consumers' intention and behavior is needed to develop and implement effective and efficient strategies. To develop and verify the extended Technology Acceptance Model (TAM) in health care by describing health consumers' behavioral intention of using HIT. This study used a cross-sectional descriptive correlational design. We extended TAM by adding more antecedents and mediating variables to enhance the model's explanatory power and to make it more applicable to health consumers' behavioral intention. Additional antecedents and mediating variables were added to the hypothetical model, based on their theoretical relevance, from the Health Belief Model and theory of planned behavior, along with the TAM. We undertook structural equation analysis to examine the specific nature of the relationship involved in understanding consumers' use of HIT. Study participants were 728 members recruited from three Internet health portals in Korea. Data were collected by a Web-based survey using a structured self-administered questionnaire. The overall fitness indices for the model developed in this study indicated an acceptable fit of the model. All path coefficients were statistically significant. This study showed that perceived threat, perceived usefulness, and perceived ease of use significantly affected health consumers' attitude and behavioral intention. Health consumers' health status, health belief and concerns, subjective norm, HIT characteristics, and HIT self-efficacy had a strong indirect impact on attitude and behavioral intention through the mediators of perceived threat, perceived usefulness, and perceived ease of use. An extended TAM in the HIT arena was found to be valid to describe health consumers' behavioral intention. We categorized the concepts in

  12. Curve fitting methods for solar radiation data modeling

    Energy Technology Data Exchange (ETDEWEB)

    Karim, Samsul Ariffin Abdul, E-mail: samsul-ariffin@petronas.com.my, E-mail: balbir@petronas.com.my; Singh, Balbir Singh Mahinder, E-mail: samsul-ariffin@petronas.com.my, E-mail: balbir@petronas.com.my [Department of Fundamental and Applied Sciences, Faculty of Sciences and Information Technology, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 Tronoh, Perak Darul Ridzuan (Malaysia)

    2014-10-24

    This paper studies the use of several type of curve fitting method to smooth the global solar radiation data. After the data have been fitted by using curve fitting method, the mathematical model of global solar radiation will be developed. The error measurement was calculated by using goodness-fit statistics such as root mean square error (RMSE) and the value of R{sup 2}. The best fitting methods will be used as a starting point for the construction of mathematical modeling of solar radiation received in Universiti Teknologi PETRONAS (UTP) Malaysia. Numerical results indicated that Gaussian fitting and sine fitting (both with two terms) gives better results as compare with the other fitting methods.

  13. Curve fitting methods for solar radiation data modeling

    Science.gov (United States)

    Karim, Samsul Ariffin Abdul; Singh, Balbir Singh Mahinder

    2014-10-01

    This paper studies the use of several type of curve fitting method to smooth the global solar radiation data. After the data have been fitted by using curve fitting method, the mathematical model of global solar radiation will be developed. The error measurement was calculated by using goodness-fit statistics such as root mean square error (RMSE) and the value of R2. The best fitting methods will be used as a starting point for the construction of mathematical modeling of solar radiation received in Universiti Teknologi PETRONAS (UTP) Malaysia. Numerical results indicated that Gaussian fitting and sine fitting (both with two terms) gives better results as compare with the other fitting methods.

  14. Curve fitting methods for solar radiation data modeling

    International Nuclear Information System (INIS)

    Karim, Samsul Ariffin Abdul; Singh, Balbir Singh Mahinder

    2014-01-01

    This paper studies the use of several type of curve fitting method to smooth the global solar radiation data. After the data have been fitted by using curve fitting method, the mathematical model of global solar radiation will be developed. The error measurement was calculated by using goodness-fit statistics such as root mean square error (RMSE) and the value of R 2 . The best fitting methods will be used as a starting point for the construction of mathematical modeling of solar radiation received in Universiti Teknologi PETRONAS (UTP) Malaysia. Numerical results indicated that Gaussian fitting and sine fitting (both with two terms) gives better results as compare with the other fitting methods

  15. Modeling Evolution on Nearly Neutral Network Fitness Landscapes

    Science.gov (United States)

    Yakushkina, Tatiana; Saakian, David B.

    2017-08-01

    To describe virus evolution, it is necessary to define a fitness landscape. In this article, we consider the microscopic models with the advanced version of neutral network fitness landscapes. In this problem setting, we suppose a fitness difference between one-point mutation neighbors to be small. We construct a modification of the Wright-Fisher model, which is related to ordinary infinite population models with nearly neutral network fitness landscape at the large population limit. From the microscopic models in the realistic sequence space, we derive two versions of nearly neutral network models: with sinks and without sinks. We claim that the suggested model describes the evolutionary dynamics of RNA viruses better than the traditional Wright-Fisher model with few sequences.

  16. MEASUREMENT FOR ACCEPTANCE OF SUPPLY CHAIN SIMULATOR APPLICATION USING TECHNOLOGY ACCEPTANCE MODEL

    Directory of Open Access Journals (Sweden)

    Mulyati E.

    2018-03-01

    Full Text Available The aim of this research for was to measure the user acceptance of simulator application which was built as a tool for student in learning of supply chain, particularly in bullwhip effect problem. The measurements used for the acceptance of supply chain simulator application in this research was the Technology Acceptance Model from 162 samples which were analyzed with Confirmatory Factor Analysis and Structural Equation Modelling. The result of this research indicated that the user acceptance (shown by customer participation of supply chain simulator was directly influence by perceived usefulness of supply chain simulator application used (positive and significant; the user acceptance of supply chain simulator was indirectly influenced by perceived ease of use in using supply chain simulator application (positive but not significant; the user acceptance of supply chain simulator was indirectly influenced by perceived enjoyment when the supply chain simulator application was used. The research would give a better understanding about a bullwhip effect and better experience for students, which would not be obtained through conventional learning, when the tools were not used.

  17. Development and acceptability testing of decision trees for self-management of prosthetic socket fit in adults with lower limb amputation.

    Science.gov (United States)

    Lee, Daniel Joseph; Veneri, Diana A

    2018-05-01

    The most common complaint lower limb prosthesis users report is inadequacy of a proper socket fit. Adjustments to the residual limb-socket interface can be made by the prosthesis user without consultation of a clinician in many scenarios through skilled self-management. Decision trees guide prosthesis wearers through the self-management process, empowering them to rectify fit issues, or referring them to a clinician when necessary. This study examines the development and acceptability testing of patient-centered decision trees for lower limb prosthesis users. Decision trees underwent a four-stage process: literature review and expert consultation, designing, two-rounds of expert panel review and revisions, and target audience testing. Fifteen lower limb prosthesis users (average age 61 years) reviewed the decision trees and completed an acceptability questionnaire. Participants reported agreement of 80% or above in five of the eight questions related to acceptability of the decision trees. Disagreement was related to the level of experience of the respondent. Decision trees were found to be easy to use, illustrate correct solutions to common issues, and have terminology consistent with that of a new prosthesis user. Some users with greater than 1.5 years of experience would not use the decision trees based on their own self-management skills. Implications for Rehabilitation Discomfort of the residual limb-prosthetic socket interface is the most common reason for clinician visits. Prosthesis users can use decision trees to guide them through the process of obtaining a proper socket fit independently. Newer users may benefit from using the decision trees more than experienced users.

  18. Fitting Hidden Markov Models to Psychological Data

    Directory of Open Access Journals (Sweden)

    Ingmar Visser

    2002-01-01

    Full Text Available Markov models have been used extensively in psychology of learning. Applications of hidden Markov models are rare however. This is partially due to the fact that comprehensive statistics for model selection and model assessment are lacking in the psychological literature. We present model selection and model assessment statistics that are particularly useful in applying hidden Markov models in psychology. These statistics are presented and evaluated by simulation studies for a toy example. We compare AIC, BIC and related criteria and introduce a prediction error measure for assessing goodness-of-fit. In a simulation study, two methods of fitting equality constraints are compared. In two illustrative examples with experimental data we apply selection criteria, fit models with constraints and assess goodness-of-fit. First, data from a concept identification task is analyzed. Hidden Markov models provide a flexible approach to analyzing such data when compared to other modeling methods. Second, a novel application of hidden Markov models in implicit learning is presented. Hidden Markov models are used in this context to quantify knowledge that subjects express in an implicit learning task. This method of analyzing implicit learning data provides a comprehensive approach for addressing important theoretical issues in the field.

  19. Random-growth urban model with geographical fitness

    Science.gov (United States)

    Kii, Masanobu; Akimoto, Keigo; Doi, Kenji

    2012-12-01

    This paper formulates a random-growth urban model with a notion of geographical fitness. Using techniques of complex-network theory, we study our system as a type of preferential-attachment model with fitness, and we analyze its macro behavior to clarify the properties of the city-size distributions it predicts. First, restricting the geographical fitness to take positive values and using a continuum approach, we show that the city-size distributions predicted by our model asymptotically approach Pareto distributions with coefficients greater than unity. Then, allowing the geographical fitness to take negative values, we perform local coefficient analysis to show that the predicted city-size distributions can deviate from Pareto distributions, as is often observed in actual city-size distributions. As a result, the model we propose can generate a generic class of city-size distributions, including but not limited to Pareto distributions. For applications to city-population projections, our simple model requires randomness only when new cities are created, not during their subsequent growth. This property leads to smooth trajectories of city population growth, in contrast to other models using Gibrat’s law. In addition, a discrete form of our dynamical equations can be used to estimate past city populations based on present-day data; this fact allows quantitative assessment of the performance of our model. Further study is needed to determine appropriate formulas for the geographical fitness.

  20. Modeling patients' acceptance of provider-delivered e-health.

    Science.gov (United States)

    Wilson, E Vance; Lankton, Nancy K

    2004-01-01

    Health care providers are beginning to deliver a range of Internet-based services to patients; however, it is not clear which of these e-health services patients need or desire. The authors propose that patients' acceptance of provider-delivered e-health can be modeled in advance of application development by measuring the effects of several key antecedents to e-health use and applying models of acceptance developed in the information technology (IT) field. This study tested three theoretical models of IT acceptance among patients who had recently registered for access to provider-delivered e-health. An online questionnaire administered items measuring perceptual constructs from the IT acceptance models (intrinsic motivation, perceived ease of use, perceived usefulness/extrinsic motivation, and behavioral intention to use e-health) and five hypothesized antecedents (satisfaction with medical care, health care knowledge, Internet dependence, information-seeking preference, and health care need). Responses were collected and stored in a central database. All tested IT acceptance models performed well in predicting patients' behavioral intention to use e-health. Antecedent factors of satisfaction with provider, information-seeking preference, and Internet dependence uniquely predicted constructs in the models. Information technology acceptance models provide a means to understand which aspects of e-health are valued by patients and how this may affect future use. In addition, antecedents to the models can be used to predict e-health acceptance in advance of system development.

  1. Video Game Acceptance: A Meta-Analysis of the Extended Technology Acceptance Model.

    Science.gov (United States)

    Wang, Xiaohui; Goh, Dion Hoe-Lian

    2017-11-01

    The current study systematically reviews and summarizes the existing literature of game acceptance, identifies the core determinants, and evaluates the strength of the relationships in the extended technology acceptance model. Moreover, this study segments video games into two categories: hedonic and utilitarian and examines player acceptance of these two types separately. Through a meta-analysis of 50 articles, we find that perceived ease of use (PEOU), perceived usefulness (PU), and perceived enjoyment (PE) significantly associate with attitude and behavioral intention. PE is the dominant predictor of hedonic game acceptance, while PEOU and PU are the main determinants of utilitarian game acceptance. Furthermore, we find that respondent type and game platform are significant moderators. Findings of this study provide critical insights into the phenomenon of game acceptance and suggest directions for future research.

  2. Strategies for fitting nonlinear ecological models in R, AD Model Builder, and BUGS

    DEFF Research Database (Denmark)

    Bolker, B.M.; Gardner, B.; Maunder, M.

    2013-01-01

    Ecologists often use nonlinear fitting techniques to estimate the parameters of complex ecological models, with attendant frustration. This paper compares three open-source model fitting tools and discusses general strategies for defining and fitting models. R is convenient and (relatively) easy...... to learn, AD Model Builder is fast and robust but comes with a steep learning curve, while BUGS provides the greatest flexibility at the price of speed. Our model-fitting suggestions range from general cultural advice (where possible, use the tools and models that are most common in your subfield...

  3. Local fit evaluation of structural equation models using graphical criteria.

    Science.gov (United States)

    Thoemmes, Felix; Rosseel, Yves; Textor, Johannes

    2018-03-01

    Evaluation of model fit is critically important for every structural equation model (SEM), and sophisticated methods have been developed for this task. Among them are the χ² goodness-of-fit test, decomposition of the χ², derived measures like the popular root mean square error of approximation (RMSEA) or comparative fit index (CFI), or inspection of residuals or modification indices. Many of these methods provide a global approach to model fit evaluation: A single index is computed that quantifies the fit of the entire SEM to the data. In contrast, graphical criteria like d-separation or trek-separation allow derivation of implications that can be used for local fit evaluation, an approach that is hardly ever applied. We provide an overview of local fit evaluation from the viewpoint of SEM practitioners. In the presence of model misfit, local fit evaluation can potentially help in pinpointing where the problem with the model lies. For models that do fit the data, local tests can identify the parts of the model that are corroborated by the data. Local tests can also be conducted before a model is fitted at all, and they can be used even for models that are globally underidentified. We discuss appropriate statistical local tests, and provide applied examples. We also present novel software in R that automates this type of local fit evaluation. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  4. A Distributive Model of Treatment Acceptability

    Science.gov (United States)

    Carter, Stacy L.

    2008-01-01

    A model of treatment acceptability is proposed that distributes overall treatment acceptability into three separate categories of influence. The categories are comprised of societal influences, consultant influences, and influences associated with consumers of treatments. Each of these categories are defined and their inter-relationships within…

  5. topicmodels: An R Package for Fitting Topic Models

    Directory of Open Access Journals (Sweden)

    Bettina Grun

    2011-05-01

    Full Text Available Topic models allow the probabilistic modeling of term frequency occurrences in documents. The fitted model can be used to estimate the similarity between documents as well as between a set of specified keywords using an additional layer of latent variables which are referred to as topics. The R package topicmodels provides basic infrastructure for fitting topic models based on data structures from the text mining package tm. The package includes interfaces to two algorithms for fitting topic models: the variational expectation-maximization algorithm provided by David M. Blei and co-authors and an algorithm using Gibbs sampling by Xuan-Hieu Phan and co-authors.

  6. Fitting oscillating string gas cosmology to supernova data

    International Nuclear Information System (INIS)

    Ferrer, Francesc; Multamaeki, Tuomas; Raesaenen, Syksy

    2009-01-01

    In string gas cosmology, extra dimensions are stabilised by a gas of strings. In the matter-dominated era, competition between matter pushing the extra dimensions to expand and the string gas pulling them back can lead to oscillations of the extra dimensions and acceleration in the visible dimensions. We fit this model to supernova data, taking into account the Big Bang Nucleosynthesis constraint on the energy density of the string gas. The fit to the Union set of supernova data is acceptable, but the fit to the ESSENCE data is poor.

  7. The FIT Model - Fuel-cycle Integration and Tradeoffs

    International Nuclear Information System (INIS)

    Piet, Steven J.; Soelberg, Nick R.; Bays, Samuel E.; Pereira, Candido; Pincock, Layne F.; Shaber, Eric L.; Teague, Melissa C.; Teske, Gregory M.; Vedros, Kurt G.

    2010-01-01

    All mass streams from fuel separation and fabrication are products that must meet some set of product criteria - fuel feedstock impurity limits, waste acceptance criteria (WAC), material storage (if any), or recycle material purity requirements such as zirconium for cladding or lanthanides for industrial use. These must be considered in a systematic and comprehensive way. The FIT model and the 'system losses study' team that developed it (Shropshire2009, Piet2010) are an initial step by the FCR and D program toward a global analysis that accounts for the requirements and capabilities of each component, as well as major material flows within an integrated fuel cycle. This will help the program identify near-term R and D needs and set longer-term goals. The question originally posed to the 'system losses study' was the cost of separation, fuel fabrication, waste management, etc. versus the separation efficiency. In other words, are the costs associated with marginal reductions in separations losses (or improvements in product recovery) justified by the gains in the performance of other systems? We have learned that that is the wrong question. The right question is: how does one adjust the compositions and quantities of all mass streams, given uncertain product criteria, to balance competing objectives including cost? FIT is a method to analyze different fuel cycles using common bases to determine how chemical performance changes in one part of a fuel cycle (say used fuel cooling times or separation efficiencies) affect other parts of the fuel cycle. FIT estimates impurities in fuel and waste via a rough estimate of physics and mass balance for a set of technologies. If feasibility is an issue for a set, as it is for 'minimum fuel treatment' approaches such as melt refining and AIROX, it can help to make an estimate of how performances would have to change to achieve feasibility.

  8. Climate change benefits and energy supply benefits as determinants of acceptance of nuclear power stations: Investigating an explanatory model

    International Nuclear Information System (INIS)

    Visschers, Vivianne H.M.; Keller, Carmen; Siegrist, Michael

    2011-01-01

    Several countries are currently discussing whether they will rebuild their nuclear power stations in order to continue this type of energy production in the future. The public, with its own opinion about nuclear power stations, has an influential voice in this discussion. As a result, policy makers and nuclear scientists are interested in the public's perception of nuclear power and in what determines this perception. We therefore examined an explanatory model of the public's acceptance of nuclear power based on a telephone survey among a representative sample in Switzerland. The model included such factors as risk perception, benefit perception, affective feelings, and social trust. Moreover, we distinguished between two types of benefit perception: benefit for the climate and a secure energy supply. The model fitted very well to our data and explained acceptance very well. Acceptance was mainly influenced by perceived benefits for a secure energy supply and, to a lesser extent, both by perceived benefits for the climate and by risk perception. Affective feelings about nuclear power appeared to be a central factor in the model. Implications for communication about nuclear power stations and for further research are discussed. - Highlights: → Explanatory model of determinants of nuclear power acceptance was studied in the representative survey. → Perceived benefits for a secure energy supply had the largest influence on acceptance. → Perceived benefits for the climate seemed less influential on acceptance. → Affect had a central role in the explanatory model. → Implications for communication about nuclear power plants are discussed.

  9. Climate change benefits and energy supply benefits as determinants of acceptance of nuclear power stations: Investigating an explanatory model

    Energy Technology Data Exchange (ETDEWEB)

    Visschers, Vivianne H.M., E-mail: vvisschers@ethz.ch [ETH Zurich, Institute for Environmental Decisions (IED), Consumer Behavior, Universitaetsstrasse 22 CHN J 75.2, 8092 Zurich (Switzerland); Keller, Carmen; Siegrist, Michael [ETH Zurich, Institute for Environmental Decisions (IED), Consumer Behavior, Universitaetsstrasse 22 CHN J 75.2, 8092 Zurich (Switzerland)

    2011-06-15

    Several countries are currently discussing whether they will rebuild their nuclear power stations in order to continue this type of energy production in the future. The public, with its own opinion about nuclear power stations, has an influential voice in this discussion. As a result, policy makers and nuclear scientists are interested in the public's perception of nuclear power and in what determines this perception. We therefore examined an explanatory model of the public's acceptance of nuclear power based on a telephone survey among a representative sample in Switzerland. The model included such factors as risk perception, benefit perception, affective feelings, and social trust. Moreover, we distinguished between two types of benefit perception: benefit for the climate and a secure energy supply. The model fitted very well to our data and explained acceptance very well. Acceptance was mainly influenced by perceived benefits for a secure energy supply and, to a lesser extent, both by perceived benefits for the climate and by risk perception. Affective feelings about nuclear power appeared to be a central factor in the model. Implications for communication about nuclear power stations and for further research are discussed. - Highlights: > Explanatory model of determinants of nuclear power acceptance was studied in the representative survey. > Perceived benefits for a secure energy supply had the largest influence on acceptance. > Perceived benefits for the climate seemed less influential on acceptance. > Affect had a central role in the explanatory model. > Implications for communication about nuclear power plants are discussed.

  10. Chinese Nurses' Acceptance of PDA: A Cross-Sectional Survey Using a Technology Acceptance Model.

    Science.gov (United States)

    Wang, Yanling; Xiao, Qian; Sun, Liu; Wu, Ying

    2016-01-01

    This study explores Chinese nurses' acceptance of PDA, using a questionnaire based on the framework of Technology Acceptance Model (TAM). 357 nurses were involved in the study. The results reveal the scores of the nurses' acceptance of PDA were means 3.18~3.36 in four dimensions. The younger of nurses, the higher nurses' title, the longer previous usage time, the more experienced using PDA, and the more acceptance of PDA. Therefore, the hospital administrators may change strategies to enhance nurses' acceptance of PDA, and promote the wide application of PDA.

  11. Gerontechnology acceptance by elderly Hong Kong Chinese: a senior technology acceptance model (STAM).

    Science.gov (United States)

    Chen, Ke; Chan, Alan Hoi Shou

    2014-01-01

    The purpose of this study was to develop and test a senior technology acceptance model (STAM) aimed at understanding the acceptance of gerontechnology by older Hong Kong Chinese people. The proposed STAM extended previous technology acceptance models and theories by adding age-related health and ability characteristics of older people. The proposed STAM was empirically tested using a cross-sectional questionnaire survey with a sample of 1012 seniors aged 55 and over in Hong Kong. The result showed that STAM was strongly supported and could explain 68% of the variance in the use of gerontechnology. For older Hong Kong Chinese, individual attributes, which include age, gender, education, gerontechnology self-efficacy and anxiety, and health and ability characteristics, as well as facilitating conditions explicitly and directly affected technology acceptance. These were better predictors of gerontechnology usage behaviour (UB) than the conventionally used attitudinal factors (usefulness and ease of use).

  12. Gap Acceptance Behavior Model for Non-signalized

    OpenAIRE

    Fajaruddin Bin Mustakim

    2015-01-01

    The paper proposes field studies that were performed to determine the critical gap on the multiple rural roadways Malaysia, at non-signalized T-intersection by using The Raff and Logic Method. Critical gap between passenger car and motorcycle have been determined.   There are quite number of studied doing gap acceptance behavior model for passenger car however still few research on gap acceptance behavior model for motorcycle. Thus in this paper, logistic regression models were developed to p...

  13. Goodness-of-Fit Assessment of Item Response Theory Models

    Science.gov (United States)

    Maydeu-Olivares, Alberto

    2013-01-01

    The article provides an overview of goodness-of-fit assessment methods for item response theory (IRT) models. It is now possible to obtain accurate "p"-values of the overall fit of the model if bivariate information statistics are used. Several alternative approaches are described. As the validity of inferences drawn on the fitted model…

  14. Consumer attitudes toward and intentions to accept mobile advertising

    Directory of Open Access Journals (Sweden)

    Abednego Feehi Okoe

    2015-09-01

    Full Text Available The objective of this study was to examine the drivers of consumers’ attitudes towards mobile advertisement. It also sought the relationship between consumers’ attitudes towards mobile advertisement and their willingness to accept mobile advertising. Confirmatory factor analysis was used to assess the measurement model while structural equation was conducted to assess the goodness-fit of the overall model. The findings indicate that entertainment, credibility and personalization had positive effects on consumers’ attitudes toward mobile advertising. Furthermore, the results show that, consumers’ attitude determines their willingness to accept mobile advertising.

  15. Automatic fitting of spiking neuron models to electrophysiological recordings

    Directory of Open Access Journals (Sweden)

    Cyrille Rossant

    2010-03-01

    Full Text Available Spiking models can accurately predict the spike trains produced by cortical neurons in response to somatically injected currents. Since the specific characteristics of the model depend on the neuron, a computational method is required to fit models to electrophysiological recordings. The fitting procedure can be very time consuming both in terms of computer simulations and in terms of code writing. We present algorithms to fit spiking models to electrophysiological data (time-varying input and spike trains that can run in parallel on graphics processing units (GPUs. The model fitting library is interfaced with Brian, a neural network simulator in Python. If a GPU is present it uses just-in-time compilation to translate model equations into optimized code. Arbitrary models can then be defined at script level and run on the graphics card. This tool can be used to obtain empirically validated spiking models of neurons in various systems. We demonstrate its use on public data from the INCF Quantitative Single-Neuron Modeling 2009 competition by comparing the performance of a number of neuron spiking models.

  16. The FITS model office ergonomics program: a model for best practice.

    Science.gov (United States)

    Chim, Justine M Y

    2014-01-01

    An effective office ergonomics program can predict positive results in reducing musculoskeletal injury rates, enhancing productivity, and improving staff well-being and job satisfaction. Its objective is to provide a systematic solution to manage the potential risk of musculoskeletal disorders among computer users in an office setting. A FITS Model office ergonomics program is developed. The FITS Model Office Ergonomics Program has been developed which draws on the legislative requirements for promoting the health and safety of workers using computers for extended periods as well as previous research findings. The Model is developed according to the practical industrial knowledge in ergonomics, occupational health and safety management, and human resources management in Hong Kong and overseas. This paper proposes a comprehensive office ergonomics program, the FITS Model, which considers (1) Furniture Evaluation and Selection; (2) Individual Workstation Assessment; (3) Training and Education; (4) Stretching Exercises and Rest Break as elements of an effective program. An experienced ergonomics practitioner should be included in the program design and implementation. Through the FITS Model Office Ergonomics Program, the risk of musculoskeletal disorders among computer users can be eliminated or minimized, and workplace health and safety and employees' wellness enhanced.

  17. Reliability and Model Fit

    Science.gov (United States)

    Stanley, Leanne M.; Edwards, Michael C.

    2016-01-01

    The purpose of this article is to highlight the distinction between the reliability of test scores and the fit of psychometric measurement models, reminding readers why it is important to consider both when evaluating whether test scores are valid for a proposed interpretation and/or use. It is often the case that an investigator judges both the…

  18. Measuring Technology Acceptance Level of Turkish Pre-Service English Teachers by Using Technology Acceptance Model

    Science.gov (United States)

    Kirmizi, Özkan

    2014-01-01

    The aim of this study is to investigate technology acceptance of prospective English teachers by using Technology Acceptance Model (TAM) in Turkish context. The study is based on Structural Equation Model (SEM). The participants of the study from English Language Teaching Departments of Hacettepe, Gazi and Baskent Universities. The participants…

  19. Investigating Students' Acceptance of a Statistics Learning Platform Using Technology Acceptance Model

    Science.gov (United States)

    Song, Yanjie; Kong, Siu-Cheung

    2017-01-01

    The study aims at investigating university students' acceptance of a statistics learning platform to support the learning of statistics in a blended learning context. Three kinds of digital resources, which are simulations, online videos, and online quizzes, were provided on the platform. Premised on the technology acceptance model, we adopted a…

  20. Modeling eBook acceptance: A study on mathematics teachers

    Science.gov (United States)

    Jalal, Azlin Abd; Ayub, Ahmad Fauzi Mohd; Tarmizi, Rohani Ahmad

    2014-12-01

    The integration and effectiveness of eBook utilization in Mathematics teaching and learning greatly relied upon the teachers, hence the need to understand their perceptions and beliefs. The eBook, an individual laptop completed with digitized textbook sofwares, were provided for each students in line with the concept of 1 student:1 laptop. This study focuses on predicting a model on the acceptance of the eBook among Mathematics teachers. Data was collected from 304 mathematics teachers in selected schools using a survey questionnaire. The selection were based on the proportionate stratified sampling. Structural Equation Modeling (SEM) were employed where the model was tested and evaluated and was found to have a good fit. The variance explained for the teachers' attitude towards eBook is approximately 69.1% where perceived usefulness appeared to be a stronger determinant compared to perceived ease of use. This study concluded that the attitude of mathematics teachers towards eBook depends largely on the perception of how useful the eBook is on improving their teaching performance, implying that teachers should be kept updated with the latest mathematical application and sofwares to use with the eBook to ensure positive attitude towards using it in class.

  1. Strategies for fitting nonlinear ecological models in R, AD Model Builder, and BUGS

    Science.gov (United States)

    Bolker, Benjamin M.; Gardner, Beth; Maunder, Mark; Berg, Casper W.; Brooks, Mollie; Comita, Liza; Crone, Elizabeth; Cubaynes, Sarah; Davies, Trevor; de Valpine, Perry; Ford, Jessica; Gimenez, Olivier; Kéry, Marc; Kim, Eun Jung; Lennert-Cody, Cleridy; Magunsson, Arni; Martell, Steve; Nash, John; Nielson, Anders; Regentz, Jim; Skaug, Hans; Zipkin, Elise

    2013-01-01

    1. Ecologists often use nonlinear fitting techniques to estimate the parameters of complex ecological models, with attendant frustration. This paper compares three open-source model fitting tools and discusses general strategies for defining and fitting models. 2. R is convenient and (relatively) easy to learn, AD Model Builder is fast and robust but comes with a steep learning curve, while BUGS provides the greatest flexibility at the price of speed. 3. Our model-fitting suggestions range from general cultural advice (where possible, use the tools and models that are most common in your subfield) to specific suggestions about how to change the mathematical description of models to make them more amenable to parameter estimation. 4. A companion web site (https://groups.nceas.ucsb.edu/nonlinear-modeling/projects) presents detailed examples of application of the three tools to a variety of typical ecological estimation problems; each example links both to a detailed project report and to full source code and data.

  2. Are Physical Education Majors Models for Fitness?

    Science.gov (United States)

    Kamla, James; Snyder, Ben; Tanner, Lori; Wash, Pamela

    2012-01-01

    The National Association of Sport and Physical Education (NASPE) (2002) has taken a firm stance on the importance of adequate fitness levels of physical education teachers stating that they have the responsibility to model an active lifestyle and to promote fitness behaviors. Since the NASPE declaration, national initiatives like Let's Move…

  3. ITEM LEVEL DIAGNOSTICS AND MODEL - DATA FIT IN ITEM ...

    African Journals Online (AJOL)

    Global Journal

    Item response theory (IRT) is a framework for modeling and analyzing item response ... data. Though, there is an argument that the evaluation of fit in IRT modeling has been ... National Council on Measurement in Education ... model data fit should be based on three types of ... prediction should be assessed through the.

  4. Assessing fit in Bayesian models for spatial processes

    KAUST Repository

    Jun, M.; Katzfuss, M.; Hu, J.; Johnson, V. E.

    2014-01-01

    © 2014 John Wiley & Sons, Ltd. Gaussian random fields are frequently used to model spatial and spatial-temporal data, particularly in geostatistical settings. As much of the attention of the statistics community has been focused on defining and estimating the mean and covariance functions of these processes, little effort has been devoted to developing goodness-of-fit tests to allow users to assess the models' adequacy. We describe a general goodness-of-fit test and related graphical diagnostics for assessing the fit of Bayesian Gaussian process models using pivotal discrepancy measures. Our method is applicable for both regularly and irregularly spaced observation locations on planar and spherical domains. The essential idea behind our method is to evaluate pivotal quantities defined for a realization of a Gaussian random field at parameter values drawn from the posterior distribution. Because the nominal distribution of the resulting pivotal discrepancy measures is known, it is possible to quantitatively assess model fit directly from the output of Markov chain Monte Carlo algorithms used to sample from the posterior distribution on the parameter space. We illustrate our method in a simulation study and in two applications.

  5. Assessing fit in Bayesian models for spatial processes

    KAUST Repository

    Jun, M.

    2014-09-16

    © 2014 John Wiley & Sons, Ltd. Gaussian random fields are frequently used to model spatial and spatial-temporal data, particularly in geostatistical settings. As much of the attention of the statistics community has been focused on defining and estimating the mean and covariance functions of these processes, little effort has been devoted to developing goodness-of-fit tests to allow users to assess the models\\' adequacy. We describe a general goodness-of-fit test and related graphical diagnostics for assessing the fit of Bayesian Gaussian process models using pivotal discrepancy measures. Our method is applicable for both regularly and irregularly spaced observation locations on planar and spherical domains. The essential idea behind our method is to evaluate pivotal quantities defined for a realization of a Gaussian random field at parameter values drawn from the posterior distribution. Because the nominal distribution of the resulting pivotal discrepancy measures is known, it is possible to quantitatively assess model fit directly from the output of Markov chain Monte Carlo algorithms used to sample from the posterior distribution on the parameter space. We illustrate our method in a simulation study and in two applications.

  6. Predicting User Acceptance of Collaborative Technologies: An Extension of the Technology Acceptance Model for E-Learning

    Science.gov (United States)

    Cheung, Ronnie; Vogel, Doug

    2013-01-01

    Collaborative technologies support group work in project-based environments. In this study, we enhance the technology acceptance model to explain the factors that influence the acceptance of Google Applications for collaborative learning. The enhanced model was empirically evaluated using survey data collected from 136 students enrolled in a…

  7. Curve fitting for RHB Islamic Bank annual net profit

    Science.gov (United States)

    Nadarajan, Dineswary; Noor, Noor Fadiya Mohd

    2015-05-01

    The RHB Islamic Bank net profit data are obtained from 2004 to 2012. Curve fitting is done by assuming the data are exact or experimental due to smoothing process. Higher order Lagrange polynomial and cubic spline with curve fitting procedure are constructed using Maple software. Normality test is performed to check the data adequacy. Regression analysis with curve estimation is conducted in SPSS environment. All the eleven models are found to be acceptable at 10% significant level of ANOVA. Residual error and absolute relative true error are calculated and compared. The optimal model based on the minimum average error is proposed.

  8. Effects of dynamic workstation Oxidesk on acceptance, physical activity, mental fitness and work performance.

    Science.gov (United States)

    Groenesteijn, L; Commissaris, D A C M; Van den Berg-Zwetsloot, M; Hiemstra-Van Mastrigt, S

    2016-07-19

    Working in an office environment is characterised by physical inactivity and sedentary behaviour. This behaviour contributes to several health risks in the long run. Dynamic workstations which allow people to combine desk activities with physical activity, may contribute to prevention of these health risks. A dynamic workstation, called Oxidesk, was evaluated to determine the possible contribution to healthy behaviour and the impact on perceived work performance. A field test was conducted with 22 office workers, employed at a health insurance company in the Netherlands. The Oxidesk was well accepted, positively perceived for fitness and the participants maintained their work performance. Physical activity was lower than the activity level required in the Dutch guidelines for sufficient physical activity. Although there was a slight increase in physical activity, the Oxidesk may be helpful in the reducing health risks involved and seems applicable for introduction to office environments.

  9. Technical basis for the CANDU steam generator tube fitness-for-service guidelines

    International Nuclear Information System (INIS)

    Kozluk, M.J.; Scarth, D.A.; Graham, D.B.

    2002-01-01

    Active degradation mechanisms in steam generators and preheaters in Canadian CANDU T M generating stations are managed through Steam Generator Programs that incorporate tube inspection, maintenance (cleaning), fitness-for-service assessment, and preventative plugging as part of the overall steam generator management strategy. Steam generator and preheater tubes are inspected in accordance with the CSA Standard CAN/CSA-N285.4-94[l]. When a detected flaw indication does not satisfy the criteria of acceptance by examination, CSA-N285.4-94 permits a fitness-for-service assessment to determine acceptability. In 1999 Ontario Power Generation issued, for trial use, fitness-for-service guidelines for steam generator and preheater tubes in CANDU nuclear power plants. The main objectives of the Fitness-for-Service Guidelines are to provide reasonable assurance that tube structural integrity is maintained, and to provide reasonable assurance that there are adequate margins between estimated accumulated dose and applicable site dose limits. The Fitness-for-Service Guidelines are intended to provide industry-standard acceptance criteria and evaluation procedures for assessing the condition of steam generator and preheater tubes in terms of tube structural integrity, operational leak rate, and consequential leakage during an upset or abnormal event. This paper describes the technical basis for the minimum required safety factors specified in Table IC-1 of the Fitness-for-Service Guidelines and for the flaw models used to develop the flaw stability requirements in the nonmandatory, Appendix C of the Fitness-for-Service Guidelines. (author)

  10. Automated Model Fit Method for Diesel Engine Control Development

    NARCIS (Netherlands)

    Seykens, X.; Willems, F.P.T.; Kuijpers, B.; Rietjens, C.

    2014-01-01

    This paper presents an automated fit for a control-oriented physics-based diesel engine combustion model. This method is based on the combination of a dedicated measurement procedure and structured approach to fit the required combustion model parameters. Only a data set is required that is

  11. Automated model fit method for diesel engine control development

    NARCIS (Netherlands)

    Seykens, X.L.J.; Willems, F.P.T.; Kuijpers, B.; Rietjens, C.J.H.

    2014-01-01

    This paper presents an automated fit for a control-oriented physics-based diesel engine combustion model. This method is based on the combination of a dedicated measurement procedure and structured approach to fit the required combustion model parameters. Only a data set is required that is

  12. A structural model of technology acceptance

    Directory of Open Access Journals (Sweden)

    Etienne Erasmus

    2015-04-01

    Research purpose: The aim of this study was to test the technology acceptance model within a South African SAP® Enterprise Resource Planning user environment. Motivation for the study: No study could be traced in which the technology acceptance model has been evaluated in the South African context. Research approach, design and method: A cross-sectional survey design was used. The 23-item Technology Acceptance Model Questionnaire was deployed amongst SAP® Enterprise Resource Planning users (N = 241. Main findings: The results confirmed significant paths from perceived usefulness of the information system to attitudes towards and behavioural intentions to use it. Furthermore, behavioural intention to use the system predicted actual use thereof. Perceived ease of use indirectly affected attitudes towards and behavioural intentions to use via perceived usefulness of the information system. Practical/managerial implications: Practitioners should build user confidence by ensuring the ease of use of a new system, providing relevant education, training and guidance and reiterating its usefulness and future added value to the user’s job and career. Contribution/value-add: This study contributes to scientific knowledge regarding the influence of individuals’ perceptions of information system usage on their attitudes, behavioural intentions and actual use of such a system.

  13. An R package for fitting age, period and cohort models

    Directory of Open Access Journals (Sweden)

    Adriano Decarli

    2014-11-01

    Full Text Available In this paper we present the R implementation of a GLIM macro which fits age-period-cohort model following Osmond and Gardner. In addition to the estimates of the corresponding model, owing to the programming capability of R as an object oriented language, methods for printing, plotting and summarizing the results are provided. Furthermore, the researcher has fully access to the output of the main function (apc which returns all the models fitted within the function. It is so possible to critically evaluate the goodness of fit of the resulting model.

  14. Are Fit Indices Biased in Favor of Bi-Factor Models in Cognitive Ability Research?: A Comparison of Fit in Correlated Factors, Higher-Order, and Bi-Factor Models via Monte Carlo Simulations

    Directory of Open Access Journals (Sweden)

    Grant B. Morgan

    2015-02-01

    Full Text Available Bi-factor confirmatory factor models have been influential in research on cognitive abilities because they often better fit the data than correlated factors and higher-order models. They also instantiate a perspective that differs from that offered by other models. Motivated by previous work that hypothesized an inherent statistical bias of fit indices favoring the bi-factor model, we compared the fit of correlated factors, higher-order, and bi-factor models via Monte Carlo methods. When data were sampled from a true bi-factor structure, each of the approximate fit indices was more likely than not to identify the bi-factor solution as the best fitting. When samples were selected from a true multiple correlated factors structure, approximate fit indices were more likely overall to identify the correlated factors solution as the best fitting. In contrast, when samples were generated from a true higher-order structure, approximate fit indices tended to identify the bi-factor solution as best fitting. There was extensive overlap of fit values across the models regardless of true structure. Although one model may fit a given dataset best relative to the other models, each of the models tended to fit the data well in absolute terms. Given this variability, models must also be judged on substantive and conceptual grounds.

  15. Evaluation of the Acceptance of Audience Response System by Corporations Using the Technology Acceptance Model

    Science.gov (United States)

    Chu, Hsing-Hui; Lu, Ta-Jung; Wann, Jong-Wen

    The purpose of this research is to explore enterprises' acceptance of Audience Response System (ARS) using Technology Acceptance Model (TAM). The findings show that (1) IT characteristics and facilitating conditions could be external variables of TAM. (2) The degree of E-business has positive significant correlation with behavioral intention of employees. (3) TAM is a good model to predict and explain IT acceptance. (4) Demographic variables, industry and firm characteristics have no significant correlation with ARS acceptance. The results provide useful information to managers and ARS providers that (1) ARS providers should focus more on creating different usages to enhance interactivity and employees' using intention. (2) Managers should pay attention to build sound internal facilitating conditions for introducing IT. (3) According to the degree of E-business, managers should set up strategic stages of introducing IT. (4) Providers should increase product promotion and also leverage academic and government to promote ARS.

  16. Factor structure of the pictorial scale of perceived competence and social acceptance with two pre-elementary samples.

    Science.gov (United States)

    Mantzicopoulos, Panayota; French, Brian F; Maller, Susan J

    2004-01-01

    Competing models of the factorial structure of the Pictorial Scale of Perceived Competence and Social Acceptance (PSPCSA) were tested for fit using multisample confirmatory factor analysis. The best fitting model was tested for invariance (a) across samples of middle-class (n = 251) and economically disadvantaged (Head Start, n = 117) kindergarten children (whose ages ranged from 67 to 86 months), and (b) over time (at the end of preschool and kindergarten) for the Head Start sample. For kindergarten children, regardless of socioeconomic status, the factor structure of the PSPCSA was consistent with the 2-factor model of Competence and Acceptance. This model also fit reasonably well for Head Start children at the end of their preschool year. However, in addition to providing broad support for the dimensionality of the measure, our findings highlight important concerns about the PSPCSA. Copyright 2004 Society for Research in Child Development, Inc.

  17. Blog acceptance model: An empirical study on exploring users’ acceptance and continual usage of blogs

    Institute of Scientific and Technical Information of China (English)

    ZHAO; Yuxiang; ZHU; Qinghua

    2009-01-01

    Blogs have permeated into our daily lives at a fast speed,and various kinds of blog spaces have attracted our attention.However,little effort has been made on studying the users’motivation to participate in blog activities.This paper aims to construct a theoretical model about the blog adoption based on technology acceptance model(TAM theory),social capital theory and social exchange theory,and put forward 18 related hypotheses.Then the survey method is adopted to analyze the data from 208 questionnaires using the SPSS and LISREL tools,and to examine the theoretical model and hypotheses.Finally,the paper makes a discussion from five aspects due to the results of data analysis,including individual driving factors,group driving factors,community driving factors,technology acceptance factors and moderating variables.The results show that curiosity/enjoyment,user’s experience,social interaction and social identification will greatly affect users’motivation to accept a blog;meanwhile,perceived ease of use,exchange cost and trust will partially influence users’intention to participate in blog activities.The results also suggest that age and education degrees have significant moderating effects on users’acceptance and updating of blogs.

  18. Does model fit decrease the uncertainty of the data in comparison with a general non-model least squares fit?

    International Nuclear Information System (INIS)

    Pronyaev, V.G.

    2003-01-01

    The information entropy is taken as a measure of knowledge about the object and the reduced univariante variance as a common measure of uncertainty. Covariances in the model versus non-model least square fits are discussed

  19. Efficient occupancy model-fitting for extensive citizen-science data

    Science.gov (United States)

    Morgan, Byron J. T.; Freeman, Stephen N.; Ridout, Martin S.; Brereton, Tom M.; Fox, Richard; Powney, Gary D.; Roy, David B.

    2017-01-01

    Appropriate large-scale citizen-science data present important new opportunities for biodiversity modelling, due in part to the wide spatial coverage of information. Recently proposed occupancy modelling approaches naturally incorporate random effects in order to account for annual variation in the composition of sites surveyed. In turn this leads to Bayesian analysis and model fitting, which are typically extremely time consuming. Motivated by presence-only records of occurrence from the UK Butterflies for the New Millennium data base, we present an alternative approach, in which site variation is described in a standard way through logistic regression on relevant environmental covariates. This allows efficient occupancy model-fitting using classical inference, which is easily achieved using standard computers. This is especially important when models need to be fitted each year, typically for many different species, as with British butterflies for example. Using both real and simulated data we demonstrate that the two approaches, with and without random effects, can result in similar conclusions regarding trends. There are many advantages to classical model-fitting, including the ability to compare a range of alternative models, identify appropriate covariates and assess model fit, using standard tools of maximum likelihood. In addition, modelling in terms of covariates provides opportunities for understanding the ecological processes that are in operation. We show that there is even greater potential; the classical approach allows us to construct regional indices simply, which indicate how changes in occupancy typically vary over a species’ range. In addition we are also able to construct dynamic occupancy maps, which provide a novel, modern tool for examining temporal changes in species distribution. These new developments may be applied to a wide range of taxa, and are valuable at a time of climate change. They also have the potential to motivate citizen

  20. A Model Fit Statistic for Generalized Partial Credit Model

    Science.gov (United States)

    Liang, Tie; Wells, Craig S.

    2009-01-01

    Investigating the fit of a parametric model is an important part of the measurement process when implementing item response theory (IRT), but research examining it is limited. A general nonparametric approach for detecting model misfit, introduced by J. Douglas and A. S. Cohen (2001), has exhibited promising results for the two-parameter logistic…

  1. Unifying distance-based goodness-of-fit indicators for hydrologic model assessment

    Science.gov (United States)

    Cheng, Qinbo; Reinhardt-Imjela, Christian; Chen, Xi; Schulte, Achim

    2014-05-01

    The goodness-of-fit indicator, i.e. efficiency criterion, is very important for model calibration. However, recently the knowledge about the goodness-of-fit indicators is all empirical and lacks a theoretical support. Based on the likelihood theory, a unified distance-based goodness-of-fit indicator termed BC-GED model is proposed, which uses the Box-Cox (BC) transformation to remove the heteroscedasticity of model errors and the generalized error distribution (GED) with zero-mean to fit the distribution of model errors after BC. The BC-GED model can unify all recent distance-based goodness-of-fit indicators, and reveals the mean square error (MSE) and the mean absolute error (MAE) that are widely used goodness-of-fit indicators imply statistic assumptions that the model errors follow the Gaussian distribution and the Laplace distribution with zero-mean, respectively. The empirical knowledge about goodness-of-fit indicators can be also easily interpreted by BC-GED model, e.g. the sensitivity to high flow of the goodness-of-fit indicators with large power of model errors results from the low probability of large model error in the assumed distribution of these indicators. In order to assess the effect of the parameters (i.e. the BC transformation parameter λ and the GED kurtosis coefficient β also termed the power of model errors) of BC-GED model on hydrologic model calibration, six cases of BC-GED model were applied in Baocun watershed (East China) with SWAT-WB-VSA model. Comparison of the inferred model parameters and model simulation results among the six indicators demonstrates these indicators can be clearly separated two classes by the GED kurtosis β: β >1 and β ≤ 1. SWAT-WB-VSA calibrated by the class β >1 of distance-based goodness-of-fit indicators captures high flow very well and mimics the baseflow very badly, but it calibrated by the class β ≤ 1 mimics the baseflow very well, because first the larger value of β, the greater emphasis is put on

  2. A Comparison of Item Fit Statistics for Mixed IRT Models

    Science.gov (United States)

    Chon, Kyong Hee; Lee, Won-Chan; Dunbar, Stephen B.

    2010-01-01

    In this study we examined procedures for assessing model-data fit of item response theory (IRT) models for mixed format data. The model fit indices used in this study include PARSCALE's G[superscript 2], Orlando and Thissen's S-X[superscript 2] and S-G[superscript 2], and Stone's chi[superscript 2*] and G[superscript 2*]. To investigate the…

  3. APLIKASI TECHNOLOGY ACCEPTANCE MODEL (TAM) PADA KOMPUTERISASI KEGIATAN PERTANAHAN

    OpenAIRE

    Wahyu Prabawati Putri Handayani; Mugi Harsono

    2016-01-01

    Abstrak: Aplikasi Technology Acceptance Model (TAM) Pada Komputerisasi Kegiatan Pertanahan. Tujuan penelitian ini adalah untuk menguji dan menganalisis pengaruh Technology Acceptance Model (TAM) Pada Komputerisasi Kegiatan Pertanahan. Sebuah metodologi survey digunakan untuk mengumpulkan data 100 karyawan. Path analysis menunjukkan bahwa (1) Computer self-efficacy berpengaruh pada persepsi kemudahan penggunaan dan persepsi manfaat teknologi, (2) Persepsi kemudahan penggunaan teknologi berpeng...

  4. Relationship Between Teacher ICT Competency And Teacher Acceptance And Use Of School Management System (SMS

    Directory of Open Access Journals (Sweden)

    Leong Mei Wei

    2016-10-01

    Full Text Available This study aims at examining the relationship between teacher ICT competency and teacher acceptance and use of SMS in Negeri Sembilan secondary schools in Malaysia. This is a non-experimental quantitative research using survey technique through the administration of a set of questionnaire that comprised teacher demographic variables, teacher ICT competency and teacher acceptance and use of SMS. Some 417 returned questionnaires have been analyzed. The findings showed that teachers in Negeri Sembilan secondary schools rated themselves as having high level of ICT competency, and acceptance and use of SMS. Furthermore, data indicated that there was a statistically significant moderately strong positive correlation between teacher ICT competency and teacher acceptance and use of SMS. In addition, multiple regression analysis showed that smart pedagogy, professional growth and leadership, and digital citizenship were the three teacher ICT competency dimensions that are statistically significant predictors of teacher acceptance and use of SMS. The fitness indexes of the proposed structural model do not achieve the level of fitness required for RMSEA, GFI, and Ratio Chisq/df. Thus, a re-specified structural model was established for this study.

  5. Sensitivity of Fit Indices to Misspecification in Growth Curve Models

    Science.gov (United States)

    Wu, Wei; West, Stephen G.

    2010-01-01

    This study investigated the sensitivity of fit indices to model misspecification in within-individual covariance structure, between-individual covariance structure, and marginal mean structure in growth curve models. Five commonly used fit indices were examined, including the likelihood ratio test statistic, root mean square error of…

  6. Axelrod model: accepting or discussing

    Science.gov (United States)

    Dybiec, Bartlomiej; Mitarai, Namiko; Sneppen, Kim

    2012-10-01

    Agents building social systems are characterized by complex states, and interactions among individuals can align their opinions. The Axelrod model describes how local interactions can result in emergence of cultural domains. We propose two variants of the Axelrod model where local consensus is reached either by listening and accepting one of neighbors' opinion or two agents discuss their opinion and achieve an agreement with mixed opinions. We show that the local agreement rule affects the character of the transition between the single culture and the multiculture regimes.

  7. Fits of the baryon magnetic moments to the quark model and spectrum-generating SU(3)

    International Nuclear Information System (INIS)

    Bohm, A.; Teese, R.B.

    1982-01-01

    We show that for theoretical as well as phenomenological reasons the baryon magnetic moments that fulfill simple group transformation properties should be taken in intrinsic rather than nuclear magnetons. A fit of the recent experimental data to the reduced matrix elements of the usual octet electromagnetic current is still not good, and in order to obtain acceptable agreement, one has to add correction terms to the octet current. We have texted two kinds of corrections: U-spin-scalar terms, which are singles out by the model-independent algebraic properties of the hadron electromagnetic current, and octet U-spin vectors, which could come from quark-mass breaking in a nonrelativistic quark model. We find that the U-spin-scalar terms are more important than the U-spin vectors for various levels of demanded theoretical accuracy

  8. Standard error propagation in R-matrix model fitting for light elements

    International Nuclear Information System (INIS)

    Chen Zhenpeng; Zhang Rui; Sun Yeying; Liu Tingjin

    2003-01-01

    The error propagation features with R-matrix model fitting 7 Li, 11 B and 17 O systems were researched systematically. Some laws of error propagation were revealed, an empirical formula P j = U j c / U j d = K j · S-bar · √m / √N for describing standard error propagation was established, the most likely error ranges for standard cross sections of 6 Li(n,t), 10 B(n,α0) and 10 B(n,α1) were estimated. The problem that the standard error of light nuclei standard cross sections may be too small results mainly from the R-matrix model fitting, which is not perfect. Yet R-matrix model fitting is the most reliable evaluation method for such data. The error propagation features of R-matrix model fitting for compound nucleus system of 7 Li, 11 B and 17 O has been studied systematically, some laws of error propagation are revealed, and these findings are important in solving the problem mentioned above. Furthermore, these conclusions are suitable for similar model fitting in other scientific fields. (author)

  9. Applying the Technology Acceptance Model and flow theory to Cyworld user behavior: implication of the Web2.0 user acceptance.

    Science.gov (United States)

    Shin, Dong-Hee; Kim, Won-Yong; Kim, Won-Young

    2008-06-01

    This study explores attitudinal and behavioral patterns when using Cyworld by adopting an expanded Technology Acceptance Model (TAM). A model for Cyworld acceptance is used to examine how various factors modified from the TAM influence acceptance and its antecedents. This model is examined through an empirical study involving Cyworld users using structural equation modeling techniques. The model shows reasonably good measurement properties and the constructs are validated. The results not only confirm the model but also reveal general factors applicable to Web2.0. A set of constructs in the model can be the Web2.0-specific factors, playing as enhancing factor to attitudes and intention.

  10. Model-fitting approach to kinetic analysis of non-isothermal oxidation of molybdenite

    International Nuclear Information System (INIS)

    Ebrahimi Kahrizsangi, R.; Abbasi, M. H.; Saidi, A.

    2007-01-01

    The kinetics of molybdenite oxidation was studied by non-isothermal TGA-DTA with heating rate 5 d eg C .min -1 . The model-fitting kinetic approach applied to TGA data. The Coats-Redfern method used of model fitting. The popular model-fitting gives excellent fit non-isothermal data in chemically controlled regime. The apparent activation energy was determined to be about 34.2 kcalmol -1 With pre-exponential factor about 10 8 sec -1 for extent of reaction less than 0.5

  11. When the model fits the frame: the impact of regulatory fit on efficacy appraisal and persuasion in health communication.

    Science.gov (United States)

    Bosone, Lucia; Martinez, Frédéric; Kalampalikis, Nikos

    2015-04-01

    In health-promotional campaigns, positive and negative role models can be deployed to illustrate the benefits or costs of certain behaviors. The main purpose of this article is to investigate why, how, and when exposure to role models strengthens the persuasiveness of a message, according to regulatory fit theory. We argue that exposure to a positive versus a negative model activates individuals' goals toward promotion rather than prevention. By means of two experiments, we demonstrate that high levels of persuasion occur when a message advertising healthy dietary habits offers a regulatory fit between its framing and the described role model. Our data also establish that the effects of such internal regulatory fit by vicarious experience depend on individuals' perceptions of response-efficacy and self-efficacy. Our findings constitute a significant theoretical complement to previous research on regulatory fit and contain valuable practical implications for health-promotional campaigns. © 2015 by the Society for Personality and Social Psychology, Inc.

  12. Flexible competing risks regression modeling and goodness-of-fit

    DEFF Research Database (Denmark)

    Scheike, Thomas; Zhang, Mei-Jie

    2008-01-01

    In this paper we consider different approaches for estimation and assessment of covariate effects for the cumulative incidence curve in the competing risks model. The classic approach is to model all cause-specific hazards and then estimate the cumulative incidence curve based on these cause...... models that is easy to fit and contains the Fine-Gray model as a special case. One advantage of this approach is that our regression modeling allows for non-proportional hazards. This leads to a new simple goodness-of-fit procedure for the proportional subdistribution hazards assumption that is very easy...... of the flexible regression models to analyze competing risks data when non-proportionality is present in the data....

  13. An NCME Instructional Module on Item-Fit Statistics for Item Response Theory Models

    Science.gov (United States)

    Ames, Allison J.; Penfield, Randall D.

    2015-01-01

    Drawing valid inferences from item response theory (IRT) models is contingent upon a good fit of the data to the model. Violations of model-data fit have numerous consequences, limiting the usefulness and applicability of the model. This instructional module provides an overview of methods used for evaluating the fit of IRT models. Upon completing…

  14. Fitness level and body composition indices: cross-sectional study among Malaysian adolescent.

    Science.gov (United States)

    Hanifah, Redzal Abu; Majid, Hazreen Abdul; Jalaludin, Muhammad Yazid; Al-Sadat, Nabilla; Murray, Liam J; Cantwell, Marie; Su, Tin Tin; Nahar, Azmi Mohamed

    2014-01-01

    The importance of fitness level on the well-being of children and adolescent has long been recognised. The aim of this study was to investigate the fitness level of school-going Malaysian adolescent, and its association with body composition indices. 1071 healthy secondary school students participated in the fitness assessment for the Malaysian Health and Adolescents Longitudinal Research Team (MyHEART) study. Body composition indices such as body mass index for age, waist circumference and waist height ratio were measured. Fitness level was assessed with Modified Harvard Step Test. Physical Fitness Score was calculated using total time of step test exercise and resting heart rates. Fitness levels were divided into 3 categories - unacceptable, marginally acceptable, and acceptable. Partial correlation analysis was used to determine the association between fitness score and body composition, by controlling age, gender, locality, ethnicity, smoking status and sexual maturation. Multiple regression analysis was conducted to determine which body composition was the strongest predictor for fitness. 43.3% of the participants were categorised into the unacceptable fitness group, 47.1% were considered marginally acceptable, and 9.6% were acceptable. There was a significant moderate inverse association (p Malaysian adolescent should necessitate the value of healthy lifestyle starting at a young age.

  15. PENGARUH TECHNOLOGY ACCEPTANCE MODEL DAN PENGEMBANGANNYA DALAM PERILAKU MENGGUNAKAN CORE BANKING SYSTEM

    Directory of Open Access Journals (Sweden)

    Dessanti Putri Sekti Ari

    2017-03-01

    Full Text Available The purpose of this study was to examine the antecedents that affected the acceptance of individuals in using theCore Banking System through the constructs Technology Acceptance Model and its development. Constructsused in this study were perceived usefulness, perceived ease of use, attitude, social influences, behavioral inten-tion, facilitating conditions, and behavior. Data were collected through survey methods. The samples of thisstudy were employees working in commercial banks in Malang Raya. This study used 136 respondents and wasanalyzed by smart PLS. The result of this study was that the construct of perceived usefulness and perceived easeof use in the Technology Acceptance Model affected attitude and behavior. Attitude and behavior in the Technol-ogy Acceptance Model and social influence which was the development of the Technology Acceptance Modelaffected behavioral intention to use the Core Banking System, as well as the construct of behavioral intention inTechnology Acceptance Model affected behavior, whereas construct of facilitating conditions which was thedevelopment of the Technology Acceptance Model did not affect the behavior on using the Core Banking System.

  16. Item level diagnostics and model - data fit in item response theory ...

    African Journals Online (AJOL)

    Item response theory (IRT) is a framework for modeling and analyzing item response data. Item-level modeling gives IRT advantages over classical test theory. The fit of an item score pattern to an item response theory (IRT) models is a necessary condition that must be assessed for further use of item and models that best fit ...

  17. Fitting ARMA Time Series by Structural Equation Models.

    Science.gov (United States)

    van Buuren, Stef

    1997-01-01

    This paper outlines how the stationary ARMA (p,q) model (G. Box and G. Jenkins, 1976) can be specified as a structural equation model. Maximum likelihood estimates for the parameters in the ARMA model can be obtained by software for fitting structural equation models. The method is applied to three problem types. (SLD)

  18. Acceptability of the Urban Family Medicine Project among Physicians: A Cross-Sectional Study of Medical Offices, Iran.

    Science.gov (United States)

    Kor, Elham Movahed; Rashidian, Arash; Hosseini, Mostafa; Azar, Farbod Ebadi Fard; Arab, Mohammad

    2016-10-01

    It is essential to organize private physicians in urban areas by developing urban family medicine in Iran. Acceptance of this project is currently low among physicians. The present research determined the factors affecting acceptability of the Urban Family Medicine Project among physicians working in the private sector of Mazandaran and Fars provinces in Iran. This descriptive-analytical and cross-sectional study was conducted in Mazandaran and Fars provinces. The target population was all physicians working in private offices in these regions. The sample size was calculated to be 860. The instrument contained 70 items that were modified in accordance with feedback from eight healthcare managers and a pilot sample of 50 physicians. Data was analyzed using the LISREL 8.80. The response rate was 82.21% and acceptability was almost 50% for all domains. The fit indices of the structural model were the chi-square to degree-of-freedom (2.79), normalized fit index (0.98), non-normalized fit index (0.99), comparative fit index (0.99), and root mean square error of approximation (0.05). Training facilities had no significant direct effect on acceptability; however, workload had a direct negative effect on acceptability. Other factors had direct positive effects on acceptability. Specification of the factors relating to acceptance of the project among private physicians is required to develop the project in urban areas. It is essential to upgrade the payment system, remedy cultural barriers, decrease the workload, improve the scope of practice and working conditions, and improve collaboration between healthcare professionals.

  19. Identifying best-fitting inputs in health-economic model calibration: a Pareto frontier approach.

    Science.gov (United States)

    Enns, Eva A; Cipriano, Lauren E; Simons, Cyrena T; Kong, Chung Yin

    2015-02-01

    To identify best-fitting input sets using model calibration, individual calibration target fits are often combined into a single goodness-of-fit (GOF) measure using a set of weights. Decisions in the calibration process, such as which weights to use, influence which sets of model inputs are identified as best-fitting, potentially leading to different health economic conclusions. We present an alternative approach to identifying best-fitting input sets based on the concept of Pareto-optimality. A set of model inputs is on the Pareto frontier if no other input set simultaneously fits all calibration targets as well or better. We demonstrate the Pareto frontier approach in the calibration of 2 models: a simple, illustrative Markov model and a previously published cost-effectiveness model of transcatheter aortic valve replacement (TAVR). For each model, we compare the input sets on the Pareto frontier to an equal number of best-fitting input sets according to 2 possible weighted-sum GOF scoring systems, and we compare the health economic conclusions arising from these different definitions of best-fitting. For the simple model, outcomes evaluated over the best-fitting input sets according to the 2 weighted-sum GOF schemes were virtually nonoverlapping on the cost-effectiveness plane and resulted in very different incremental cost-effectiveness ratios ($79,300 [95% CI 72,500-87,600] v. $139,700 [95% CI 79,900-182,800] per quality-adjusted life-year [QALY] gained). Input sets on the Pareto frontier spanned both regions ($79,000 [95% CI 64,900-156,200] per QALY gained). The TAVR model yielded similar results. Choices in generating a summary GOF score may result in different health economic conclusions. The Pareto frontier approach eliminates the need to make these choices by using an intuitive and transparent notion of optimality as the basis for identifying best-fitting input sets. © The Author(s) 2014.

  20. Gfitter - Revisiting the global electroweak fit of the Standard Model and beyond

    Energy Technology Data Exchange (ETDEWEB)

    Flaecher, H.; Hoecker, A. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Goebel, M. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)]|[Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany)]|[Hamburg Univ. (Germany). Inst. fuer Experimentalphysik; Haller, J. [Hamburg Univ. (Germany). Inst. fuer Experimentalphysik; Moenig, K.; Stelzer, J. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)]|[Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany)

    2008-11-15

    The global fit of the Standard Model to electroweak precision data, routinely performed by the LEP electroweak working group and others, demonstrated impressively the predictive power of electroweak unification and quantum loop corrections. We have revisited this fit in view of (i) the development of the new generic fitting package, Gfitter, allowing flexible and efficient model testing in high-energy physics, (ii) the insertion of constraints from direct Higgs searches at LEP and the Tevatron, and (iii) a more thorough statistical interpretation of the results. Gfitter is a modular fitting toolkit, which features predictive theoretical models as independent plugins, and a statistical analysis of the fit results using toy Monte Carlo techniques. The state-of-the-art electroweak Standard Model is fully implemented, as well as generic extensions to it. Theoretical uncertainties are explicitly included in the fit through scale parameters varying within given error ranges. This paper introduces the Gfitter project, and presents state-of-the-art results for the global electroweak fit in the Standard Model, and for a model with an extended Higgs sector (2HDM). Numerical and graphical results for fits with and without including the constraints from the direct Higgs searches at LEP and Tevatron are given. Perspectives for future colliders are analysed and discussed. Including the direct Higgs searches, we find M{sub H}=116.4{sup +18.3}{sub -1.3} GeV, and the 2{sigma} and 3{sigma} allowed regions [114,145] GeV and [[113,168] and [180,225

  1. SPSS macros to compare any two fitted values from a regression model.

    Science.gov (United States)

    Weaver, Bruce; Dubois, Sacha

    2012-12-01

    In regression models with first-order terms only, the coefficient for a given variable is typically interpreted as the change in the fitted value of Y for a one-unit increase in that variable, with all other variables held constant. Therefore, each regression coefficient represents the difference between two fitted values of Y. But the coefficients represent only a fraction of the possible fitted value comparisons that might be of interest to researchers. For many fitted value comparisons that are not captured by any of the regression coefficients, common statistical software packages do not provide the standard errors needed to compute confidence intervals or carry out statistical tests-particularly in more complex models that include interactions, polynomial terms, or regression splines. We describe two SPSS macros that implement a matrix algebra method for comparing any two fitted values from a regression model. The !OLScomp and !MLEcomp macros are for use with models fitted via ordinary least squares and maximum likelihood estimation, respectively. The output from the macros includes the standard error of the difference between the two fitted values, a 95% confidence interval for the difference, and a corresponding statistical test with its p-value.

  2. LEP asymmetries and fits of the standard model

    International Nuclear Information System (INIS)

    Pietrzyk, B.

    1994-01-01

    The lepton and quark asymmetries measured at LEP are presented. The results of the Standard Model fits to the electroweak data presented at this conference are given. The top mass obtained from the fit to the LEP data is 172 -14-20 +13+18 GeV; it is 177 -11-19 +11+18 when also the collider, ν and A LR data are included. (author). 10 refs., 3 figs., 2 tabs

  3. Checking the Adequacy of Fit of Models from Split-Plot Designs

    DEFF Research Database (Denmark)

    Almini, A. A.; Kulahci, Murat; Montgomery, D. C.

    2009-01-01

    models. In this article, we propose the computation of two R-2, R-2-adjusted, prediction error sums of squares (PRESS), and R-2-prediction statistics to measure the adequacy of fit for the WP and the SP submodels in a split-plot design. This is complemented with the graphical analysis of the two types......One of the main features that distinguish split-plot experiments from other experiments is that they involve two types of experimental errors: the whole-plot (WP) error and the subplot (SP) error. Taking this into consideration is very important when computing measures of adequacy of fit for split-plot...... of errors to check for any violation of the underlying assumptions and the adequacy of fit of split-plot models. Using examples, we show how computing two measures of model adequacy of fit for each split-plot design model is appropriate and useful as they reveal whether the correct WP and SP effects have...

  4. Repair models of cell survival and corresponding computer program for survival curve fitting

    International Nuclear Information System (INIS)

    Shen Xun; Hu Yiwei

    1992-01-01

    Some basic concepts and formulations of two repair models of survival, the incomplete repair (IR) model and the lethal-potentially lethal (LPL) model, are introduced. An IBM-PC computer program for survival curve fitting with these models was developed and applied to fit the survivals of human melanoma cells HX118 irradiated at different dose rates. Comparison was made between the repair models and two non-repair models, the multitar get-single hit model and the linear-quadratic model, in the fitting and analysis of the survival-dose curves. It was shown that either IR model or LPL model can fit a set of survival curves of different dose rates with same parameters and provide information on the repair capacity of cells. These two mathematical models could be very useful in quantitative study on the radiosensitivity and repair capacity of cells

  5. HDFITS: Porting the FITS data model to HDF5

    Science.gov (United States)

    Price, D. C.; Barsdell, B. R.; Greenhill, L. J.

    2015-09-01

    The FITS (Flexible Image Transport System) data format has been the de facto data format for astronomy-related data products since its inception in the late 1970s. While the FITS file format is widely supported, it lacks many of the features of more modern data serialization, such as the Hierarchical Data Format (HDF5). The HDF5 file format offers considerable advantages over FITS, such as improved I/O speed and compression, but has yet to gain widespread adoption within astronomy. One of the major holdbacks is that HDF5 is not well supported by data reduction software packages and image viewers. Here, we present a comparison of FITS and HDF5 as a format for storage of astronomy datasets. We show that the underlying data model of FITS can be ported to HDF5 in a straightforward manner, and that by doing so the advantages of the HDF5 file format can be leveraged immediately. In addition, we present a software tool, fits2hdf, for converting between FITS and a new 'HDFITS' format, where data are stored in HDF5 in a FITS-like manner. We show that HDFITS allows faster reading of data (up to 100x of FITS in some use cases), and improved compression (higher compression ratios and higher throughput). Finally, we show that by only changing the import lines in Python-based FITS utilities, HDFITS formatted data can be presented transparently as an in-memory FITS equivalent.

  6. Using a modified technology acceptance model in hospitals.

    Science.gov (United States)

    Aggelidis, Vassilios P; Chatzoglou, Prodromos D

    2009-02-01

    The use of information technology in the health care sector and especially in hospitals offers great potential for improving the quality of services provided and the efficiency and effectiveness of the personnel, but also for reducing the organizational expenses. However, the main question that arises according to the literature is whether hospital personnel are willing to use state of the art information technology while performing their tasks. This study attempts to address this issue by developing and testing a modified technology acceptance model taking into consideration other relevant models found in the literature. The original TAM has been extended to include some exogenous variables in order to examine HIS acceptance by Greek hospital personnel. Correlation, explanatory and confirmation factor analysis was performed to test the reliability and validity of the measurement model. The structural equation modeling technique has also been used to evaluate the causal model. The results indicate that perceived usefulness, ease of use, social influence, attitude, facilitating conditions and self-efficacy significantly affect hospital personnel behavioral intention. Training has a strong indirect impact on behavioral intention through the mediators of facilitating condition and ease of use. Furthermore, the existence of significant positive effects between self-efficacy and social influence, perceived usefulness and anxiety, and facilitating conditions and social influence is also supported. The proposed model can explain 87% of the variance of behavioral intention indicating that the core constructs of the technology acceptance models have a strong and statistically significant influence on hospital personnel usage intention.

  7. Fitness level and body composition indices: cross-sectional study among Malaysian adolescent

    Science.gov (United States)

    2014-01-01

    Background The importance of fitness level on the well-being of children and adolescent has long been recognised. The aim of this study was to investigate the fitness level of school-going Malaysian adolescent, and its association with body composition indices. Methods 1071 healthy secondary school students participated in the fitness assessment for the Malaysian Health and Adolescents Longitudinal Research Team (MyHEART) study. Body composition indices such as body mass index for age, waist circumference and waist height ratio were measured. Fitness level was assessed with Modified Harvard Step Test. Physical Fitness Score was calculated using total time of step test exercise and resting heart rates. Fitness levels were divided into 3 categories - unacceptable, marginally acceptable, and acceptable. Partial correlation analysis was used to determine the association between fitness score and body composition, by controlling age, gender, locality, ethnicity, smoking status and sexual maturation. Multiple regression analysis was conducted to determine which body composition was the strongest predictor for fitness. Results 43.3% of the participants were categorised into the unacceptable fitness group, 47.1% were considered marginally acceptable, and 9.6% were acceptable. There was a significant moderate inverse association (p fitness score (r = -0.360, -0.413 and -0.403 for body mass index for age, waist circumference and waist height ratio, respectively). Waist circumference was the strongest and significant predictor for fitness (ß = -0.318, p = 0.002). Conclusion Only 9.6% of the students were fit. There was also an inverse association between body composition and fitness score among apparently healthy adolescents, with waist circumference indicated as the strongest predictor. The low fitness level among the Malaysian adolescent should necessitate the value of healthy lifestyle starting at a young age. PMID:25436933

  8. Acceptance model of a Hospital Information System.

    Science.gov (United States)

    Handayani, P W; Hidayanto, A N; Pinem, A A; Hapsari, I C; Sandhyaduhita, P I; Budi, I

    2017-03-01

    The purpose of this study is to develop a model of Hospital Information System (HIS) user acceptance focusing on human, technological, and organizational characteristics for supporting government eHealth programs. This model was then tested to see which hospital type in Indonesia would benefit from the model to resolve problems related to HIS user acceptance. This study used qualitative and quantitative approaches with case studies at four privately owned hospitals and three government-owned hospitals, which are general hospitals in Indonesia. The respondents involved in this study are low-level and mid-level hospital management officers, doctors, nurses, and administrative staff who work at medical record, inpatient, outpatient, emergency, pharmacy, and information technology units. Data was processed using Structural Equation Modeling (SEM) and AMOS 21.0. The study concludes that non-technological factors, such as human characteristics (i.e. compatibility, information security expectancy, and self-efficacy), and organizational characteristics (i.e. management support, facilitating conditions, and user involvement) which have level of significance of p<0.05, significantly influenced users' opinions of both the ease of use and the benefits of the HIS. This study found that different factors may affect the acceptance of each user in each type of hospital regarding the use of HIS. Finally, this model is best suited for government-owned hospitals. Based on the results of this study, hospital management and IT developers should have more understanding on the non-technological factors to better plan for HIS implementation. Support from management is critical to the sustainability of HIS implementation to ensure HIS is easy to use and provides benefits to the users as well as hospitals. Finally, this study could assist hospital management and IT developers, as well as researchers, to understand the obstacles faced by hospitals in implementing HIS. Copyright © 2016

  9. Model Fit and Item Factor Analysis: Overfactoring, Underfactoring, and a Program to Guide Interpretation.

    Science.gov (United States)

    Clark, D Angus; Bowles, Ryan P

    2018-04-23

    In exploratory item factor analysis (IFA), researchers may use model fit statistics and commonly invoked fit thresholds to help determine the dimensionality of an assessment. However, these indices and thresholds may mislead as they were developed in a confirmatory framework for models with continuous, not categorical, indicators. The present study used Monte Carlo simulation methods to investigate the ability of popular model fit statistics (chi-square, root mean square error of approximation, the comparative fit index, and the Tucker-Lewis index) and their standard cutoff values to detect the optimal number of latent dimensions underlying sets of dichotomous items. Models were fit to data generated from three-factor population structures that varied in factor loading magnitude, factor intercorrelation magnitude, number of indicators, and whether cross loadings or minor factors were included. The effectiveness of the thresholds varied across fit statistics, and was conditional on many features of the underlying model. Together, results suggest that conventional fit thresholds offer questionable utility in the context of IFA.

  10. Modelling population dynamics model formulation, fitting and assessment using state-space methods

    CERN Document Server

    Newman, K B; Morgan, B J T; King, R; Borchers, D L; Cole, D J; Besbeas, P; Gimenez, O; Thomas, L

    2014-01-01

    This book gives a unifying framework for estimating the abundance of open populations: populations subject to births, deaths and movement, given imperfect measurements or samples of the populations.  The focus is primarily on populations of vertebrates for which dynamics are typically modelled within the framework of an annual cycle, and for which stochastic variability in the demographic processes is usually modest. Discrete-time models are developed in which animals can be assigned to discrete states such as age class, gender, maturity,  population (within a metapopulation), or species (for multi-species models). The book goes well beyond estimation of abundance, allowing inference on underlying population processes such as birth or recruitment, survival and movement. This requires the formulation and fitting of population dynamics models.  The resulting fitted models yield both estimates of abundance and estimates of parameters characterizing the underlying processes.  

  11. Revisiting the Global Electroweak Fit of the Standard Model and Beyond with Gfitter

    CERN Document Server

    Flächer, Henning; Haller, J; Höcker, A; Mönig, K; Stelzer, J

    2009-01-01

    The global fit of the Standard Model to electroweak precision data, routinely performed by the LEP electroweak working group and others, demonstrated impressively the predictive power of electroweak unification and quantum loop corrections. We have revisited this fit in view of (i) the development of the new generic fitting package, Gfitter, allowing flexible and efficient model testing in high-energy physics, (ii) the insertion of constraints from direct Higgs searches at LEP and the Tevatron, and (iii) a more thorough statistical interpretation of the results. Gfitter is a modular fitting toolkit, which features predictive theoretical models as independent plugins, and a statistical analysis of the fit results using toy Monte Carlo techniques. The state-of-the-art electroweak Standard Model is fully implemented, as well as generic extensions to it. Theoretical uncertainties are explicitly included in the fit through scale parameters varying within given error ranges. This paper introduces the Gfitter projec...

  12. Limitations of inclusive fitness.

    Science.gov (United States)

    Allen, Benjamin; Nowak, Martin A; Wilson, Edward O

    2013-12-10

    Until recently, inclusive fitness has been widely accepted as a general method to explain the evolution of social behavior. Affirming and expanding earlier criticism, we demonstrate that inclusive fitness is instead a limited concept, which exists only for a small subset of evolutionary processes. Inclusive fitness assumes that personal fitness is the sum of additive components caused by individual actions. This assumption does not hold for the majority of evolutionary processes or scenarios. To sidestep this limitation, inclusive fitness theorists have proposed a method using linear regression. On the basis of this method, it is claimed that inclusive fitness theory (i) predicts the direction of allele frequency changes, (ii) reveals the reasons for these changes, (iii) is as general as natural selection, and (iv) provides a universal design principle for evolution. In this paper we evaluate these claims, and show that all of them are unfounded. If the objective is to analyze whether mutations that modify social behavior are favored or opposed by natural selection, then no aspect of inclusive fitness theory is needed.

  13. User Acceptance of Social Learning Systems in Higher Education: An Application of the Extended Technology Acceptance Model

    Science.gov (United States)

    Akman, Ibrahim; Turhan, Cigdem

    2017-01-01

    This study aims to explore the users' behaviour and acceptance of social media for learning in higher educational institutions with the help of the extended Technology Acceptance Model (TAM). TAM has been extended to investigate how ethical and security awareness of users affect the actual usage of social learning applications. For this purpose, a…

  14. Tests of fit of historically-informed models of African American Admixture.

    Science.gov (United States)

    Gross, Jessica M

    2018-02-01

    African American populations in the U.S. formed primarily by mating between Africans and Europeans over the last 500 years. To date, studies of admixture have focused on either a one-time admixture event or continuous input into the African American population from Europeans only. Our goal is to gain a better understanding of the admixture process by examining models that take into account (a) assortative mating by ancestry in the African American population, (b) continuous input from both Europeans and Africans, and (c) historically informed variation in the rate of African migration over time. We used a model-based clustering method to generate distributions of African ancestry in three samples comprised of 147 African Americans from two published sources. We used a log-likelihood method to examine the fit of four models to these distributions and used a log-likelihood ratio test to compare the relative fit of each model. The mean ancestry estimates for our datasets of 77% African/23% European to 83% African/17% European ancestry are consistent with previous studies. We find admixture models that incorporate continuous gene flow from Europeans fit significantly better than one-time event models, and that a model involving continuous gene flow from Africans and Europeans fits better than one with continuous gene flow from Europeans only for two samples. Importantly, models that involve continuous input from Africans necessitate a higher level of gene flow from Europeans than previously reported. We demonstrate that models that take into account information about the rate of African migration over the past 500 years fit observed patterns of African ancestry better than alternative models. Our approach will enrich our understanding of the admixture process in extant and past populations. © 2017 Wiley Periodicals, Inc.

  15. Assessing user acceptance towards automated and conventional sink use for hand decontamination using the technology acceptance model.

    Science.gov (United States)

    Dawson, Carolyn H; Mackrill, Jamie B; Cain, Rebecca

    2017-12-01

    Hand hygiene (HH) prevents harmful contaminants spreading in settings including domestic, health care and food handling. Strategies to improve HH range from behavioural techniques through to automated sinks that ensure hand surface cleaning. This study aimed to assess user experience and acceptance towards a new automated sink, compared to a normal sink. An adapted version of the technology acceptance model (TAM) assessed each mode of handwashing. A within-subjects design enabled N = 46 participants to evaluate both sinks. Perceived Ease of Use and Satisfaction of Use were significantly lower for the automated sink, compared to the conventional sink (p technology. We provide recommendations for future HH technology development to contribute a positive user experience, relevant to technology developers, ergonomists and those involved in HH across all sectors. Practitioner Summary: The need to facilitate timely, effective hand hygiene to prevent illness has led to a rise in automated handwashing systems across different contexts. User acceptance is a key factor in system uptake. This paper applies the technology acceptance model as a means to explore and optimise the design of such systems.

  16. GARCH Modelling of Cryptocurrencies

    OpenAIRE

    Jeffrey Chu; Stephen Chan; Saralees Nadarajah; Joerg Osterrieder

    2017-01-01

    With the exception of Bitcoin, there appears to be little or no literature on GARCH modelling of cryptocurrencies. This paper provides the first GARCH modelling of the seven most popular cryptocurrencies. Twelve GARCH models are fitted to each cryptocurrency, and their fits are assessed in terms of five criteria. Conclusions are drawn on the best fitting models, forecasts and acceptability of value at risk estimates.

  17. [How to fit and interpret multilevel models using SPSS].

    Science.gov (United States)

    Pardo, Antonio; Ruiz, Miguel A; San Martín, Rafael

    2007-05-01

    Hierarchic or multilevel models are used to analyse data when cases belong to known groups and sample units are selected both from the individual level and from the group level. In this work, the multilevel models most commonly discussed in the statistic literature are described, explaining how to fit these models using the SPSS program (any version as of the 11 th ) and how to interpret the outcomes of the analysis. Five particular models are described, fitted, and interpreted: (1) one-way analysis of variance with random effects, (2) regression analysis with means-as-outcomes, (3) one-way analysis of covariance with random effects, (4) regression analysis with random coefficients, and (5) regression analysis with means- and slopes-as-outcomes. All models are explained, trying to make them understandable to researchers in health and behaviour sciences.

  18. Acceptance and Commitment Therapy as a Unified Model of Behavior Change

    Science.gov (United States)

    Hayes, Steven C.; Pistorello, Jacqueline; Levin, Michael E.

    2012-01-01

    The present article summarizes the assumptions, model, techniques, evidence, and diversity/social justice commitments of Acceptance and Commitment Therapy (ACT). ACT focused on six processes (acceptance, defusion, self, now, values, and action) that bear on a single overall target (psychological flexibility). The ACT model of behavior change has…

  19. Predicting the Best Fit: A Comparison of Response Surface Models for Midazolam and Alfentanil Sedation in Procedures With Varying Stimulation.

    Science.gov (United States)

    Liou, Jing-Yang; Ting, Chien-Kun; Mandell, M Susan; Chang, Kuang-Yi; Teng, Wei-Nung; Huang, Yu-Yin; Tsou, Mei-Yung

    2016-08-01

    Selecting an effective dose of sedative drugs in combined upper and lower gastrointestinal endoscopy is complicated by varying degrees of pain stimulation. We tested the ability of 5 response surface models to predict depth of sedation after administration of midazolam and alfentanil in this complex model. The procedure was divided into 3 phases: esophagogastroduodenoscopy (EGD), colonoscopy, and the time interval between the 2 (intersession). The depth of sedation in 33 adult patients was monitored by Observer Assessment of Alertness/Scores. A total of 218 combinations of midazolam and alfentanil effect-site concentrations derived from pharmacokinetic models were used to test 5 response surface models in each of the 3 phases of endoscopy. Model fit was evaluated with objective function value, corrected Akaike Information Criterion (AICc), and Spearman ranked correlation. A model was arbitrarily defined as accurate if the predicted probability is effect-site concentrations tested ranged from 1 to 76 ng/mL and from 5 to 80 ng/mL for midazolam and alfentanil, respectively. Midazolam and alfentanil had synergistic effects in colonoscopy and EGD, but additivity was observed in the intersession group. Adequate prediction rates were 84% to 85% in the intersession group, 84% to 88% during colonoscopy, and 82% to 87% during EGD. The reduced Greco and Fixed alfentanil concentration required for 50% of the patients to achieve targeted response Hierarchy models performed better with comparable predictive strength. The reduced Greco model had the lowest AICc with strong correlation in all 3 phases of endoscopy. Dynamic, rather than fixed, γ and γalf in the Hierarchy model improved model fit. The reduced Greco model had the lowest objective function value and AICc and thus the best fit. This model was reliable with acceptable predictive ability based on adequate clinical correlation. We suggest that this model has practical clinical value for patients undergoing procedures

  20. A versatile curve-fit model for linear to deeply concave rank abundance curves

    NARCIS (Netherlands)

    Neuteboom, J.H.; Struik, P.C.

    2005-01-01

    A new, flexible curve-fit model for linear to concave rank abundance curves was conceptualized and validated using observational data. The model links the geometric-series model and log-series model and can also fit deeply concave rank abundance curves. The model is based ¿ in an unconventional way

  1. Fitting Equilibrium Search Models to Labour Market Data

    DEFF Research Database (Denmark)

    Bowlus, Audra J.; Kiefer, Nicholas M.; Neumann, George R.

    1996-01-01

    Specification and estimation of a Burdett-Mortensen type equilibrium search model is considered. The estimation is nonstandard. An estimation strategy asymptotically equivalent to maximum likelihood is proposed and applied. The results indicate that specifications with a small number of productiv...... of productivity types fit the data well compared to the homogeneous model....

  2. Fast Algorithms for Fitting Active Appearance Models to Unconstrained Images

    NARCIS (Netherlands)

    Tzimiropoulos, Georgios; Pantic, Maja

    2016-01-01

    Fitting algorithms for Active Appearance Models (AAMs) are usually considered to be robust but slow or fast but less able to generalize well to unseen variations. In this paper, we look into AAM fitting algorithms and make the following orthogonal contributions: We present a simple “project-out‿

  3. Fast and exact Newton and Bidirectional fitting of Active Appearance Models.

    Science.gov (United States)

    Kossaifi, Jean; Tzimiropoulos, Yorgos; Pantic, Maja

    2016-12-21

    Active Appearance Models (AAMs) are generative models of shape and appearance that have proven very attractive for their ability to handle wide changes in illumination, pose and occlusion when trained in the wild, while not requiring large training dataset like regression-based or deep learning methods. The problem of fitting an AAM is usually formulated as a non-linear least squares one and the main way of solving it is a standard Gauss-Newton algorithm. In this paper we extend Active Appearance Models in two ways: we first extend the Gauss-Newton framework by formulating a bidirectional fitting method that deforms both the image and the template to fit a new instance. We then formulate a second order method by deriving an efficient Newton method for AAMs fitting. We derive both methods in a unified framework for two types of Active Appearance Models, holistic and part-based, and additionally show how to exploit the structure in the problem to derive fast yet exact solutions. We perform a thorough evaluation of all algorithms on three challenging and recently annotated inthe- wild datasets, and investigate fitting accuracy, convergence properties and the influence of noise in the initialisation. We compare our proposed methods to other algorithms and show that they yield state-of-the-art results, out-performing other methods while having superior convergence properties.

  4. GARCH Modelling of Cryptocurrencies

    Directory of Open Access Journals (Sweden)

    Jeffrey Chu

    2017-10-01

    Full Text Available With the exception of Bitcoin, there appears to be little or no literature on GARCH modelling of cryptocurrencies. This paper provides the first GARCH modelling of the seven most popular cryptocurrencies. Twelve GARCH models are fitted to each cryptocurrency, and their fits are assessed in terms of five criteria. Conclusions are drawn on the best fitting models, forecasts and acceptability of value at risk estimates.

  5. The Meaning of Goodness-of-Fit Tests: Commentary on "Goodness-of-Fit Assessment of Item Response Theory Models"

    Science.gov (United States)

    Thissen, David

    2013-01-01

    In this commentary, David Thissen states that "Goodness-of-fit assessment for IRT models is maturing; it has come a long way from zero." Thissen then references prior works on "goodness of fit" in the index of Lord and Novick's (1968) classic text; Yen (1984); Drasgow, Levine, Tsien, Williams, and Mead (1995); Chen and…

  6. The l z ( p ) * Person-Fit Statistic in an Unfolding Model Context.

    Science.gov (United States)

    Tendeiro, Jorge N

    2017-01-01

    Although person-fit analysis has a long-standing tradition within item response theory, it has been applied in combination with dominance response models almost exclusively. In this article, a popular log likelihood-based parametric person-fit statistic under the framework of the generalized graded unfolding model is used. Results from a simulation study indicate that the person-fit statistic performed relatively well in detecting midpoint response style patterns and not so well in detecting extreme response style patterns.

  7. Understanding Student Teachers’ Behavioural Intention to Use Technology: Technology Acceptance Model (TAM Validation and Testing

    Directory of Open Access Journals (Sweden)

    Kung-Teck, Wong

    2013-01-01

    Full Text Available This study sets out to validate and test the Technology Acceptance Model (TAM in the context of Malaysian student teachers’ integration of their technology in teaching and learning. To establish factorial validity, data collected from 302 respondents were tested against the TAM using confirmatory factor analysis (CFA, and structural equation modelling (SEM was used for model comparison and hypotheses testing. The goodness-of-fit test of the analysis shows partial support of the applicability of the TAM in a Malaysian context. Overall, the TAM accounted for 37.3% of the variance in intention to use technology among student teachers and of the five hypotheses formulated, four are supported. Perceived usefulness is a significant influence on attitude towards computer use and behavioural intention. Perceived ease of use significantly influences perceived usefulness, and finally, behavioural intention is found to be influenced by attitude towards computer use. The findings of this research contribute to the literature by validating the TAM in the Malaysian context and provide several prominent implications for the research and practice of technology integration development.

  8. Fit Gap Analysis – The Role of Business Process Reference Models

    Directory of Open Access Journals (Sweden)

    Dejan Pajk

    2013-12-01

    Full Text Available Enterprise resource planning (ERP systems support solutions for standard business processes such as financial, sales, procurement and warehouse. In order to improve the understandability and efficiency of their implementation, ERP vendors have introduced reference models that describe the processes and underlying structure of an ERP system. To select and successfully implement an ERP system, the capabilities of that system have to be compared with a company’s business needs. Based on a comparison, all of the fits and gaps must be identified and further analysed. This step usually forms part of ERP implementation methodologies and is called fit gap analysis. The paper theoretically overviews methods for applying reference models and describes fit gap analysis processes in detail. The paper’s first contribution is its presentation of a fit gap analysis using standard business process modelling notation. The second contribution is the demonstration of a process-based comparison approach between a supply chain process and an ERP system process reference model. In addition to its theoretical contributions, the results can also be practically applied to projects involving the selection and implementation of ERP systems.

  9. Acceptance of health information technology in health professionals: An application of the revised technology acceptance model

    OpenAIRE

    Ketikidis, P.; Dimitrovski, T.; Lazuras, L.; Bath, P.A.

    2012-01-01

    The response of health professionals to the use of health information technology (HIT) is an important research topic that can partly explain the success or failure of any HIT application. The present study applied a modified version of the revised technology acceptance model (TAM) to assess the relevant beliefs and acceptance of HIT systems in a sample of health professionals (n = 133). Structured anonymous questionnaires were used and a cross-sectional design was employed. The main outcome ...

  10. Plans for modeling rational acceptance of technology

    NARCIS (Netherlands)

    Houkes, W.N.; Pols, A.J.K.; Michelfelder, D.P.; McCarthy, N.; Goldberg, D.E.

    2013-01-01

    We argue that the use-plan analysis of artefact use and design can be combined with the Unified Theory of Acceptance and Use of Technology (UTAUT), a well-tested model for predicting the adoption of information systems in organizational contexts. After presenting the outlines of the use-plan

  11. Soil physical properties influencing the fitting parameters in Philip and Kostiakov infiltration models

    International Nuclear Information System (INIS)

    Mbagwu, J.S.C.

    1994-05-01

    Among the many models developed for monitoring the infiltration process those of Philip and Kostiakov have been studied in detail because of their simplicity and the ease of estimating their fitting parameters. The important soil physical factors influencing the fitting parameters in these infiltration models are reported in this study. The results of the study show that the single most important soil property affecting the fitting parameters in these models is the effective porosity. 36 refs, 2 figs, 5 tabs

  12. Identifying Ghanaian Pre-Service Teachers' Readiness for Computer Use: A Technology Acceptance Model Approach

    Science.gov (United States)

    Gyamfi, Stephen Adu

    2016-01-01

    This study extends the technology acceptance model to identify factors that influence technology acceptance among pre-service teachers in Ghana. Data from 380 usable questionnaires were tested against the research model. Utilising the extended technology acceptance model (TAM) as a research framework, the study found that: pre-service teachers'…

  13. Evaluating the influence of perceived organizational learning capability on user acceptance of information technology among operating room nurse staff.

    Science.gov (United States)

    Lee, Chien-Ching; Lin, Shih-Pin; Yang, Shu-Ling; Tsou, Mei-Yung; Chang, Kuang-Yi

    2013-03-01

    Medical institutions are eager to introduce new information technology to improve patient safety and clinical efficiency. However, the acceptance of new information technology by medical personnel plays a key role in its adoption and application. This study aims to investigate whether perceived organizational learning capability (OLC) is associated with user acceptance of information technology among operating room nurse staff. Nurse anesthetists and operating room nurses were recruited in this questionnaire survey. A pilot study was performed to ensure the reliability and validity of the translated questionnaire, which consisted of 14 items from the four dimensions of OLC, and 16 items from the four constructs of user acceptance of information technology, including performance expectancy, effort expectancy, social influence, and behavioral intention. Confirmatory factor analysis was applied in the main survey to evaluate the construct validity of the questionnaire. Structural equation modeling was used to test the hypothetical relationships between the four dimensions of user acceptance of information technology and the second-ordered OLC. Goodness of fit of the hypothetic model was also assessed. Performance expectancy, effort expectancy, and social influence positively influenced behavioral intention of users of the clinical information system (all p < 0.001) and accounted for 75% of its variation. The second-ordered OLC was positively associated with performance expectancy, effort expectancy, and social influence (all p < 0.001). However, the hypothetic relationship between perceived OLC and behavioral intention was not significant (p = 0.87). The fit statistical analysis indicated reasonable model fit to data (root mean square error of approximation = 0.07 and comparative fit index = 0.91). Perceived OLC indirectly affects user behavioral intention through the mediation of performance expectancy, effort expectancy, and social influence in the operating room

  14. The fitness landscape of HIV-1 gag: advanced modeling approaches and validation of model predictions by in vitro testing.

    Directory of Open Access Journals (Sweden)

    Jaclyn K Mann

    2014-08-01

    Full Text Available Viral immune evasion by sequence variation is a major hindrance to HIV-1 vaccine design. To address this challenge, our group has developed a computational model, rooted in physics, that aims to predict the fitness landscape of HIV-1 proteins in order to design vaccine immunogens that lead to impaired viral fitness, thus blocking viable escape routes. Here, we advance the computational models to address previous limitations, and directly test model predictions against in vitro fitness measurements of HIV-1 strains containing multiple Gag mutations. We incorporated regularization into the model fitting procedure to address finite sampling. Further, we developed a model that accounts for the specific identity of mutant amino acids (Potts model, generalizing our previous approach (Ising model that is unable to distinguish between different mutant amino acids. Gag mutation combinations (17 pairs, 1 triple and 25 single mutations within these predicted to be either harmful to HIV-1 viability or fitness-neutral were introduced into HIV-1 NL4-3 by site-directed mutagenesis and replication capacities of these mutants were assayed in vitro. The predicted and measured fitness of the corresponding mutants for the original Ising model (r = -0.74, p = 3.6×10-6 are strongly correlated, and this was further strengthened in the regularized Ising model (r = -0.83, p = 3.7×10-12. Performance of the Potts model (r = -0.73, p = 9.7×10-9 was similar to that of the Ising model, indicating that the binary approximation is sufficient for capturing fitness effects of common mutants at sites of low amino acid diversity. However, we show that the Potts model is expected to improve predictive power for more variable proteins. Overall, our results support the ability of the computational models to robustly predict the relative fitness of mutant viral strains, and indicate the potential value of this approach for understanding viral immune evasion

  15. Inelastic analysis acceptance criteria for radioactive material transportation containers

    International Nuclear Information System (INIS)

    Ammerman, D.J.; Ludwigsen, J.S.

    1993-01-01

    The design criteria currently used in the design of radioactive material (RAM) transportation containers are taken from the ASME Boiler and Pressure Vessel Code (ASME, 1992). These load-based criteria are ideally suited for pressure vessels where the loading is quasistatic and all stresses are in equilibrium with externally applied loads. For impact events, the use of load-based criteria is less supportable. Impact events tend to be energy controlled, and thus, energy-based acceptance criteria would appear to be more appropriate. Determination of an ideal design criteria depends on what behavior is desired. Currently there is not a design criteria for inelastic analysis for RAM nation packages that is accepted by the regulatory agencies. This lack of acceptance criteria is one of the major factors in limiting the use of inelastic analysis. In this paper inelastic analysis acceptance criteria based on stress and strain-energy density will be compared for two stainless steel test units subjected to impacts onto an unyielding target. Two different material models are considered for the inelastic analysis, a bilinear fit of the stress-strain curve and a power law hardening model that very closely follows the stress-strain curve. It is the purpose of this paper to stimulate discussion and research into the area of strain-energy density based inelastic analysis acceptance criteria

  16. Predicting nurses' use of healthcare technology using the technology acceptance model: an integrative review.

    Science.gov (United States)

    Strudwick, Gillian

    2015-05-01

    The benefits of healthcare technologies can only be attained if nurses accept and intend to fully use them. One of the most common models utilized to understand user acceptance of technology is the Technology Acceptance Model. This model and modified versions of it have only recently been applied in the healthcare literature among nurse participants. An integrative literature review was conducted on this topic. Ovid/MEDLINE, PubMed, Google Scholar, and CINAHL were searched yielding a total of 982 references. Upon eliminating duplicates and applying the inclusion and exclusion criteria, the review included a total of four dissertations, three symposium proceedings, and 13 peer-reviewed journal articles. These documents were appraised and reviewed. The results show that a modified Technology Acceptance Model with added variables could provide a better explanation of nurses' acceptance of healthcare technology. These added variables to modified versions of the Technology Acceptance Model are discussed, and the studies' methodologies are critiqued. Limitations of the studies included in the integrative review are also examined.

  17. Integrating social capital theory, social cognitive theory, and the technology acceptance model to explore a behavioral model of telehealth systems.

    Science.gov (United States)

    Tsai, Chung-Hung

    2014-05-07

    Telehealth has become an increasingly applied solution to delivering health care to rural and underserved areas by remote health care professionals. This study integrated social capital theory, social cognitive theory, and the technology acceptance model (TAM) to develop a comprehensive behavioral model for analyzing the relationships among social capital factors (social capital theory), technological factors (TAM), and system self-efficacy (social cognitive theory) in telehealth. The proposed framework was validated with 365 respondents from Nantou County, located in Central Taiwan. Structural equation modeling (SEM) was used to assess the causal relationships that were hypothesized in the proposed model. The finding indicates that elderly residents generally reported positive perceptions toward the telehealth system. Generally, the findings show that social capital factors (social trust, institutional trust, and social participation) significantly positively affect the technological factors (perceived ease of use and perceived usefulness respectively), which influenced usage intention. This study also confirmed that system self-efficacy was the salient antecedent of perceived ease of use. In addition, regarding the samples, the proposed model fitted considerably well. The proposed integrative psychosocial-technological model may serve as a theoretical basis for future research and can also offer empirical foresight to practitioners and researchers in the health departments of governments, hospitals, and rural communities.

  18. Integrating Social Capital Theory, Social Cognitive Theory, and the Technology Acceptance Model to Explore a Behavioral Model of Telehealth Systems

    Directory of Open Access Journals (Sweden)

    Chung-Hung Tsai

    2014-05-01

    Full Text Available Telehealth has become an increasingly applied solution to delivering health care to rural and underserved areas by remote health care professionals. This study integrated social capital theory, social cognitive theory, and the technology acceptance model (TAM to develop a comprehensive behavioral model for analyzing the relationships among social capital factors (social capital theory, technological factors (TAM, and system self-efficacy (social cognitive theory in telehealth. The proposed framework was validated with 365 respondents from Nantou County, located in Central Taiwan. Structural equation modeling (SEM was used to assess the causal relationships that were hypothesized in the proposed model. The finding indicates that elderly residents generally reported positive perceptions toward the telehealth system. Generally, the findings show that social capital factors (social trust, institutional trust, and social participation significantly positively affect the technological factors (perceived ease of use and perceived usefulness respectively, which influenced usage intention. This study also confirmed that system self-efficacy was the salient antecedent of perceived ease of use. In addition, regarding the samples, the proposed model fitted considerably well. The proposed integrative psychosocial-technological model may serve as a theoretical basis for future research and can also offer empirical foresight to practitioners and researchers in the health departments of governments, hospitals, and rural communities.

  19. A proposed model of factors influencing hydrogen fuel cell vehicle acceptance

    Science.gov (United States)

    Imanina, N. H. Noor; Kwe Lu, Tan; Fadhilah, A. R.

    2016-03-01

    Issues such as environmental problem and energy insecurity keep worsening as a result of energy use from household to huge industries including automotive industry. Recently, a new type of zero emission vehicle, hydrogen fuel cell vehicle (HFCV) has received attention. Although there are argues on the feasibility of hydrogen as the future fuel, there is another important issue, which is the acceptance of HFCV. The study of technology acceptance in the early stage is a vital key for a successful introduction and penetration of a technology. This paper proposes a model of factors influencing green vehicle acceptance, specifically HFCV. This model is built base on two technology acceptance theories and other empirical studies of vehicle acceptance. It aims to provide a base for finding the key factors influencing new sustainable energy fuelled vehicle, HFCV acceptance which is achieved by explaining intention to accept HFCV. Intention is influenced by attitude, subjective norm and perceived behavioural control from Theory of Planned Behaviour and personal norm from Norm Activation Theory. In the framework, attitude is influenced by perceptions of benefits and risks, and social trust. Perceived behavioural control is influenced by government interventions. Personal norm is influenced by outcome efficacy and problem awareness.

  20. Correcting Model Fit Criteria for Small Sample Latent Growth Models with Incomplete Data

    Science.gov (United States)

    McNeish, Daniel; Harring, Jeffrey R.

    2017-01-01

    To date, small sample problems with latent growth models (LGMs) have not received the amount of attention in the literature as related mixed-effect models (MEMs). Although many models can be interchangeably framed as a LGM or a MEM, LGMs uniquely provide criteria to assess global data-model fit. However, previous studies have demonstrated poor…

  1. Smart phone Acceptance among physicians: Application of structural equation modeling in Iranian largest university

    Directory of Open Access Journals (Sweden)

    Nematollahi M.

    2017-03-01

    Full Text Available Background: The present study aimed to determine attitudes and effective factors in the acceptance of smart phones by physicians of the largest University of Medical Sciences in the south of Iran. Methods: This cross-sectional study was performed using Structural Equation Modelling (SEM in 2014. Study participants included 200 physicians working in the hospitals of Shiraz University of Medical Sciences selected through two-stage stratified sampling, but 185 participants completed the study. The study data were collected using a researcher-made questionnaire completed through a 5-point Likert scale. The content validity of the questionnaire was confirmed by a panel of experts, its construct validity by confirmatory factor analysis, and its reliability by Cronbach’s alpha of 0.802. All data analyses were performed using SPSS (version 22 and LISREL (version 8.8. Results: Results showed that most physicians had a desirable attitude towards using smart phones. Besides, the results of SEM indicated a significant relationship between attitude and compatibility, observability, personal experience, voluntariness of use and perceived usefulness. Moreover, some important fitness indices revealed appropriate fitness of the study model (p=0.26, X2 /df=1.35, RMR=0.070, GFI=0.77, AGFI=0.71, NNFI=0.93, CFI=0.94. Conclusion: The results revealed that compatibility, observability, personal experience, voluntariness of use and perceived usefulness were effective in the physicians’ attitude towards using smart phones. Thus, by preparation of the required infrastructures, policymakers in the field of health technology can enhance the utilization of smart phones in hospitals.

  2. Consumers' acceptance of medicinal herbs: An application of the technology acceptance model (TAM).

    Science.gov (United States)

    Jokar, Nargesh Khatun; Noorhosseini, Seyyed Ali; Allahyari, Mohammad Sadegh; Damalas, Christos A

    2017-07-31

    The shift in consumers' preferences from synthetic to 'natural' products has led to a resurgence of interest in medicinal plants, particularly in developing countries. However, research data about consumers' preferences for particular products is hard to find. The main objective of this study was to contribute to the general understanding of consumers' intention for selecting medicinal herbs for consumption. Factors underpinning consumers' acceptance of medicinal herbs were studied with the technology acceptance model (TAM) in Rasht City of Iran using a structured questionnaire. Most respondents had low to moderate familiarity with consumption of medicinal herbs. However, about half of the respondents (47.5%) showed a high level of acceptance of medicinal herbs. Herbs like spearmint (Mentha spicata L.), spinach (Spinacia oleracea L.), basil (Ocimum basilicum L.), Damask rose (Rosa × damascena Herrm.), saffron (Crocus sativus L.), cinnamon (Cinnamomum verum J.Presl), flixweed [Descurainia sophia (L.) Webb ex Prantl], red feathers (Echium amoenum Fisch. & C.A.Mey.), and green tea [Camellia sinensis (L.) Kuntze] had the highest consumption rate among the majority (over 75%) of citizens of Rasht. The highest rate of perceived usefulness of medicinal herbs was related to their perceived role in healing diseases. The variable of importance of use of medicinal herbs had the strongest direct effect and the variables of perceived usefulness and attitude towards use had the second and third strongest direct effect on the acceptance of medicinal herbs' use at p acceptance of medicinal herbs and may serve as a benchmark for future research and evaluation concerning the use of medicinal herbs over time. For plant producers, more effective and targeted crop development should be encouraged, whereas for retailers better marketing and delivery strategies should be sought. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

  3. Supersymmetry with prejudice: Fitting the wrong model to LHC data

    Science.gov (United States)

    Allanach, B. C.; Dolan, Matthew J.

    2012-09-01

    We critically examine interpretations of hypothetical supersymmetric LHC signals, fitting to alternative wrong models of supersymmetry breaking. The signals we consider are some of the most constraining on the sparticle spectrum: invariant mass distributions with edges and endpoints from the golden decay chain q˜→qχ20(→l˜±l∓q)→χ10l+l-q. We assume a constrained minimal supersymmetric standard model (CMSSM) point to be the ‘correct’ one, but fit the signals instead with minimal gauge mediated supersymmetry breaking models (mGMSB) with a neutralino quasistable lightest supersymmetric particle, minimal anomaly mediation and large volume string compactification models. Minimal anomaly mediation and large volume scenario can be unambiguously discriminated against the CMSSM for the assumed signal and 1fb-1 of LHC data at s=14TeV. However, mGMSB would not be discriminated on the basis of the kinematic endpoints alone. The best-fit point spectra of mGMSB and CMSSM look remarkably similar, making experimental discrimination at the LHC based on the edges or Higgs properties difficult. However, using rate information for the golden chain should provide the additional separation required.

  4. Model fit versus biological relevance: Evaluating photosynthesis-temperature models for three tropical seagrass species.

    Science.gov (United States)

    Adams, Matthew P; Collier, Catherine J; Uthicke, Sven; Ow, Yan X; Langlois, Lucas; O'Brien, Katherine R

    2017-01-04

    When several models can describe a biological process, the equation that best fits the data is typically considered the best. However, models are most useful when they also possess biologically-meaningful parameters. In particular, model parameters should be stable, physically interpretable, and transferable to other contexts, e.g. for direct indication of system state, or usage in other model types. As an example of implementing these recommended requirements for model parameters, we evaluated twelve published empirical models for temperature-dependent tropical seagrass photosynthesis, based on two criteria: (1) goodness of fit, and (2) how easily biologically-meaningful parameters can be obtained. All models were formulated in terms of parameters characterising the thermal optimum (T opt ) for maximum photosynthetic rate (P max ). These parameters indicate the upper thermal limits of seagrass photosynthetic capacity, and hence can be used to assess the vulnerability of seagrass to temperature change. Our study exemplifies an approach to model selection which optimises the usefulness of empirical models for both modellers and ecologists alike.

  5. Model fit versus biological relevance: Evaluating photosynthesis-temperature models for three tropical seagrass species

    Science.gov (United States)

    Adams, Matthew P.; Collier, Catherine J.; Uthicke, Sven; Ow, Yan X.; Langlois, Lucas; O'Brien, Katherine R.

    2017-01-01

    When several models can describe a biological process, the equation that best fits the data is typically considered the best. However, models are most useful when they also possess biologically-meaningful parameters. In particular, model parameters should be stable, physically interpretable, and transferable to other contexts, e.g. for direct indication of system state, or usage in other model types. As an example of implementing these recommended requirements for model parameters, we evaluated twelve published empirical models for temperature-dependent tropical seagrass photosynthesis, based on two criteria: (1) goodness of fit, and (2) how easily biologically-meaningful parameters can be obtained. All models were formulated in terms of parameters characterising the thermal optimum (Topt) for maximum photosynthetic rate (Pmax). These parameters indicate the upper thermal limits of seagrass photosynthetic capacity, and hence can be used to assess the vulnerability of seagrass to temperature change. Our study exemplifies an approach to model selection which optimises the usefulness of empirical models for both modellers and ecologists alike.

  6. Examining Engineering & Technology Students' Acceptance of Network Virtualization Technology Using the Technology Acceptance Model

    Science.gov (United States)

    Yousif, Wael K.

    2010-01-01

    This causal and correlational study was designed to extend the Technology Acceptance Model (TAM) and to test its applicability to Valencia Community College (VCC) Engineering and Technology students as the target user group when investigating the factors influencing their decision to adopt and to utilize VMware as the target technology. In…

  7. Relationships between dispositional mindfulness, self-acceptance, perceived stress, and psychological symptoms in advanced gastrointestinal cancer patients.

    Science.gov (United States)

    Xu, Wei; Zhou, Yuyang; Fu, Zhongfang; Rodriguez, Marcus

    2017-12-01

    Previous studies have shown that dispositional mindfulness is associated with less psychological symptoms in cancer patients. The present study investigated how dispositional mindfulness is related to psychological symptoms in advanced gastrointestinal cancer patients by considering the roles of self-acceptance and perceived stress. A total of 176 patients with advanced gastrointestinal cancer were recruited to complete a series of questionnaires including Mindfulness Attention Awareness Scale, Self-acceptance Questionnaire, Chinese Perceived Stress Scale, and General Health Questionnaire. Results showed that the proposed model fitted the data very well (χ 2  = 7.564, df = 7, P = .364, χ 2 /df = 1.094, Goodness of Fit Index (GFI) = 0.986, Comparative Fit Index (CFI) = 0.998, Tucker Lewis Index (TLI) = 0.995, Root Mean Square Error of Approximation (RMSEA) = 0.023). Further analyses revealed that, self-acceptance and perceived stress mediated the relation between dispositional mindfulness and psychological symptoms (indirect effect = -0.052, 95% confidence interval = -0.087 ~ -0.024), while self-acceptance also mediated the relation between dispositional mindfulness and perceived stress (indirect effect = -0.154, 95% confidence interval = -0.261 ~ -0.079). Self-acceptance and perceived stress played critical roles in the relation between dispositional mindfulness and psychological symptoms. Limitations, clinical implications, and directions for future research were discussed. Copyright © 2017 John Wiley & Sons, Ltd.

  8. A person fit test for IRT models for polytomous items

    NARCIS (Netherlands)

    Glas, Cornelis A.W.; Dagohoy, A.V.

    2007-01-01

    A person fit test based on the Lagrange multiplier test is presented for three item response theory models for polytomous items: the generalized partial credit model, the sequential model, and the graded response model. The test can also be used in the framework of multidimensional ability

  9. The lz(p)* Person-Fit Statistic in an Unfolding Model Context

    NARCIS (Netherlands)

    Tendeiro, Jorge N.

    2017-01-01

    Although person-fit analysis has a long-standing tradition within item response theory, it has been applied in combination with dominance response models almost exclusively. In this article, a popular log likelihood-based parametric person-fit statistic under the framework of the generalized graded

  10. An Analysis of Bitcoin Acceptance in Indonesia

    Directory of Open Access Journals (Sweden)

    Fergyanto E. Gunawan

    2017-12-01

    Full Text Available This research intended to understand the factors affecting the acceptance of Bitcoin technology in Indonesia. It adopted the model of Unified Theory of Acceptance and Use of Technology (UTAUT, which took into account four influencing factors. Those were performance expectancy, effort expectancy, social influence, and facilitating conditions. The factors of gender and age were assumed to moderate the relations between those four factors and use and behavioral intention. The empirical data for those factors were collected by questionnaires from 49 respondents. The statistical significance of the relationships was evaluated by multivariate regression analysis. The result is a model that matches the data with R2 = 0,678. It demonstrates a high level of fitness. The analysis suggests that the performance expectancy factor and the social influence factor greatly affect the behavioral intention to use Bitcoin with the values of t-statistic of 3,835 (p-value = 0,000 for the former factor and 1,948 (0,059 for the latter factor. However, the social influence factor has less profound effect on the behavioral intention.

  11. Fitting a Bivariate Measurement Error Model for Episodically Consumed Dietary Components

    KAUST Repository

    Zhang, Saijuan; Krebs-Smith, Susan M.; Midthune, Douglas; Perez, Adriana; Buckman, Dennis W.; Kipnis, Victor; Freedman, Laurence S.; Dodd, Kevin W.; Carroll, Raymond J

    2011-01-01

    There has been great public health interest in estimating usual, i.e., long-term average, intake of episodically consumed dietary components that are not consumed daily by everyone, e.g., fish, red meat and whole grains. Short-term measurements of episodically consumed dietary components have zero-inflated skewed distributions. So-called two-part models have been developed for such data in order to correct for measurement error due to within-person variation and to estimate the distribution of usual intake of the dietary component in the univariate case. However, there is arguably much greater public health interest in the usual intake of an episodically consumed dietary component adjusted for energy (caloric) intake, e.g., ounces of whole grains per 1000 kilo-calories, which reflects usual dietary composition and adjusts for different total amounts of caloric intake. Because of this public health interest, it is important to have models to fit such data, and it is important that the model-fitting methods can be applied to all episodically consumed dietary components.We have recently developed a nonlinear mixed effects model (Kipnis, et al., 2010), and have fit it by maximum likelihood using nonlinear mixed effects programs and methodology (the SAS NLMIXED procedure). Maximum likelihood fitting of such a nonlinear mixed model is generally slow because of 3-dimensional adaptive Gaussian quadrature, and there are times when the programs either fail to converge or converge to models with a singular covariance matrix. For these reasons, we develop a Monte-Carlo (MCMC) computation of fitting this model, which allows for both frequentist and Bayesian inference. There are technical challenges to developing this solution because one of the covariance matrices in the model is patterned. Our main application is to the National Institutes of Health (NIH)-AARP Diet and Health Study, where we illustrate our methods for modeling the energy-adjusted usual intake of fish and whole

  12. Fitting a Bivariate Measurement Error Model for Episodically Consumed Dietary Components

    KAUST Repository

    Zhang, Saijuan

    2011-01-06

    There has been great public health interest in estimating usual, i.e., long-term average, intake of episodically consumed dietary components that are not consumed daily by everyone, e.g., fish, red meat and whole grains. Short-term measurements of episodically consumed dietary components have zero-inflated skewed distributions. So-called two-part models have been developed for such data in order to correct for measurement error due to within-person variation and to estimate the distribution of usual intake of the dietary component in the univariate case. However, there is arguably much greater public health interest in the usual intake of an episodically consumed dietary component adjusted for energy (caloric) intake, e.g., ounces of whole grains per 1000 kilo-calories, which reflects usual dietary composition and adjusts for different total amounts of caloric intake. Because of this public health interest, it is important to have models to fit such data, and it is important that the model-fitting methods can be applied to all episodically consumed dietary components.We have recently developed a nonlinear mixed effects model (Kipnis, et al., 2010), and have fit it by maximum likelihood using nonlinear mixed effects programs and methodology (the SAS NLMIXED procedure). Maximum likelihood fitting of such a nonlinear mixed model is generally slow because of 3-dimensional adaptive Gaussian quadrature, and there are times when the programs either fail to converge or converge to models with a singular covariance matrix. For these reasons, we develop a Monte-Carlo (MCMC) computation of fitting this model, which allows for both frequentist and Bayesian inference. There are technical challenges to developing this solution because one of the covariance matrices in the model is patterned. Our main application is to the National Institutes of Health (NIH)-AARP Diet and Health Study, where we illustrate our methods for modeling the energy-adjusted usual intake of fish and whole

  13. The History of UTAUT Model and Its Impact on ICT Acceptance and Usage by Academicians

    Science.gov (United States)

    Oye, N. D.; Iahad, N. A.; Rahim, N. Ab.

    2014-01-01

    This paper started with the review of the history of technology acceptance model from TRA to UTAUT. The expected contribution is to bring to lime light the current development stage of the technology acceptance model. Based on this, the paper examined the impact of UTAUT model on ICT acceptance and usage in HEIs. The UTAUT model theory was…

  14. Nonlinear models for fitting growth curves of Nellore cows reared in the Amazon Biome

    Directory of Open Access Journals (Sweden)

    Kedma Nayra da Silva Marinho

    2013-09-01

    Full Text Available Growth curves of Nellore cows were estimated by comparing six nonlinear models: Brody, Logistic, two alternatives by Gompertz, Richards and Von Bertalanffy. The models were fitted to weight-age data, from birth to 750 days of age of 29,221 cows, born between 1976 and 2006 in the Brazilian states of Acre, Amapá, Amazonas, Pará, Rondônia, Roraima and Tocantins. The models were fitted by the Gauss-Newton method. The goodness of fit of the models was evaluated by using mean square error, adjusted coefficient of determination, prediction error and mean absolute error. Biological interpretation of parameters was accomplished by plotting estimated weights versus the observed weight means, instantaneous growth rate, absolute maturity rate, relative instantaneous growth rate, inflection point and magnitude of the parameters A (asymptotic weight and K (maturing rate. The Brody and Von Bertalanffy models fitted the weight-age data but the other models did not. The average weight (A and growth rate (K were: 384.6±1.63 kg and 0.0022±0.00002 (Brody and 313.40±0.70 kg and 0.0045±0.00002 (Von Bertalanffy. The Brody model provides better goodness of fit than the Von Bertalanffy model.

  15. Kajian Online Sistem Informasi BRI (BRINETS: Pendekatan Technology Acceptance Model (TAM

    Directory of Open Access Journals (Sweden)

    Wahyu Meiranto

    2011-04-01

    Full Text Available Study of BRI Online Information System (BRINETS: Technology Acceptance Model (TAM Approach. The purpose of this research is to analyze factors that effecting acceptance and actual use of BRI technology information system (BRINETS using TAM (Technology Acceptance Model. Two variables of TAM used in this research are perceived ease of use and perceived of usefullness. Samples of the research were BRINETS users at BRI Semarang. There were 70 respondents involved. The data was analyzed by using PLS. The results indicate that experience and complexity have significant effect to perceived ease of use. Furthermore, perceived ease of use significantly affected the attitude toward using technology. Finally, behaviour intention significantly influence the actual use of technology

  16. Three dimensional fuzzy influence analysis of fitting algorithms on integrated chip topographic modeling

    International Nuclear Information System (INIS)

    Liang, Zhong Wei; Wang, Yi Jun; Ye, Bang Yan; Brauwer, Richard Kars

    2012-01-01

    In inspecting the detailed performance results of surface precision modeling in different external parameter conditions, the integrated chip surfaces should be evaluated and assessed during topographic spatial modeling processes. The application of surface fitting algorithms exerts a considerable influence on topographic mathematical features. The influence mechanisms caused by different surface fitting algorithms on the integrated chip surface facilitate the quantitative analysis of different external parameter conditions. By extracting the coordinate information from the selected physical control points and using a set of precise spatial coordinate measuring apparatus, several typical surface fitting algorithms are used for constructing micro topographic models with the obtained point cloud. In computing for the newly proposed mathematical features on surface models, we construct the fuzzy evaluating data sequence and present a new three dimensional fuzzy quantitative evaluating method. Through this method, the value variation tendencies of topographic features can be clearly quantified. The fuzzy influence discipline among different surface fitting algorithms, topography spatial features, and the external science parameter conditions can be analyzed quantitatively and in detail. In addition, quantitative analysis can provide final conclusions on the inherent influence mechanism and internal mathematical relation in the performance results of different surface fitting algorithms, topographic spatial features, and their scientific parameter conditions in the case of surface micro modeling. The performance inspection of surface precision modeling will be facilitated and optimized as a new research idea for micro-surface reconstruction that will be monitored in a modeling process

  17. Three dimensional fuzzy influence analysis of fitting algorithms on integrated chip topographic modeling

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Zhong Wei; Wang, Yi Jun [Guangzhou Univ., Guangzhou (China); Ye, Bang Yan [South China Univ. of Technology, Guangzhou (China); Brauwer, Richard Kars [Indian Institute of Technology, Kanpur (India)

    2012-10-15

    In inspecting the detailed performance results of surface precision modeling in different external parameter conditions, the integrated chip surfaces should be evaluated and assessed during topographic spatial modeling processes. The application of surface fitting algorithms exerts a considerable influence on topographic mathematical features. The influence mechanisms caused by different surface fitting algorithms on the integrated chip surface facilitate the quantitative analysis of different external parameter conditions. By extracting the coordinate information from the selected physical control points and using a set of precise spatial coordinate measuring apparatus, several typical surface fitting algorithms are used for constructing micro topographic models with the obtained point cloud. In computing for the newly proposed mathematical features on surface models, we construct the fuzzy evaluating data sequence and present a new three dimensional fuzzy quantitative evaluating method. Through this method, the value variation tendencies of topographic features can be clearly quantified. The fuzzy influence discipline among different surface fitting algorithms, topography spatial features, and the external science parameter conditions can be analyzed quantitatively and in detail. In addition, quantitative analysis can provide final conclusions on the inherent influence mechanism and internal mathematical relation in the performance results of different surface fitting algorithms, topographic spatial features, and their scientific parameter conditions in the case of surface micro modeling. The performance inspection of surface precision modeling will be facilitated and optimized as a new research idea for micro-surface reconstruction that will be monitored in a modeling process.

  18. Technology Acceptance Model (TAM) untuk Menganalisis Penerimaan terhadap Sistem Informasi di PerpustakaanM INFORMASI PERPUSTAKAAN

    OpenAIRE

    Fatmawati, Endang

    2015-01-01

    Technology acceptance can be defined as a user's willingness to employ technology for the tasks it is designed to support. Technology Acceptance Model (TAM) introduced by Davis in 1986. TAM is considers user perceptions of ease of use and usefulness as the main factors affecting the acceptance level of any technology. TAM is model for explaining and predicting information system use in library. TAM model to determine the attitude of users towards a technology acceptance.

  19. More Sophisticated Fits of the Oribts of Haumea's Interacting Moons

    Science.gov (United States)

    Oldroyd, William Jared; Ragozzine, Darin; Porter, Simon

    2018-04-01

    Since the discovery of Haumea's moons, it has been a challenge to model the orbits of its moons, Hi’iaka and Namaka. With many precision HST observations, Ragozzine & Brown 2009 succeeded in calculating a three-point mass model which was essential because Keplerian orbits were not a statistically acceptable fit. New data obtained in 2010 could be fit by adding a J2 and spin pole to Haumea, but new data from 2015 was far from the predicted locations, even after an extensive exploration using Bayesian Markov Chain Monte Carlo methods (using emcee). Here we report on continued investigations as to why our model cannot fit the full 10-year baseline of data. We note that by ignoring Haumea and instead examining the relative motion of the two moons in the Hi’iaka centered frame leads to adequate fits for the data. This suggests there are additional parameters connected to Haumea that will be required in a full model. These parameters are potentially related to photocenter-barycenter shifts which could be significant enough to affect the fitting process; these are unlikely to be caused by the newly discovered ring (Ortiz et al. 2017) or by unknown satellites (Burkhart et al. 2016). Additionally, we have developed a new SPIN+N-bodY integrator called SPINNY that self-consistently calculates the interactions between n-quadrupoles and is designed to test the importance of other possible effects (Haumea C22, satellite torques on the spin-pole, Sun, etc.) on our astrometric fits. By correctly determining the orbit of Haumea’s satellites we develop a better understanding of the physical properties of each of the objects with implications for the formation of Haumea, its moons, and its collisional family.

  20. Efficient Constrained Local Model Fitting for Non-Rigid Face Alignment.

    Science.gov (United States)

    Lucey, Simon; Wang, Yang; Cox, Mark; Sridharan, Sridha; Cohn, Jeffery F

    2009-11-01

    Active appearance models (AAMs) have demonstrated great utility when being employed for non-rigid face alignment/tracking. The "simultaneous" algorithm for fitting an AAM achieves good non-rigid face registration performance, but has poor real time performance (2-3 fps). The "project-out" algorithm for fitting an AAM achieves faster than real time performance (> 200 fps) but suffers from poor generic alignment performance. In this paper we introduce an extension to a discriminative method for non-rigid face registration/tracking referred to as a constrained local model (CLM). Our proposed method is able to achieve superior performance to the "simultaneous" AAM algorithm along with real time fitting speeds (35 fps). We improve upon the canonical CLM formulation, to gain this performance, in a number of ways by employing: (i) linear SVMs as patch-experts, (ii) a simplified optimization criteria, and (iii) a composite rather than additive warp update step. Most notably, our simplified optimization criteria for fitting the CLM divides the problem of finding a single complex registration/warp displacement into that of finding N simple warp displacements. From these N simple warp displacements, a single complex warp displacement is estimated using a weighted least-squares constraint. Another major advantage of this simplified optimization lends from its ability to be parallelized, a step which we also theoretically explore in this paper. We refer to our approach for fitting the CLM as the "exhaustive local search" (ELS) algorithm. Experiments were conducted on the CMU Multi-PIE database.

  1. Multi-binding site model-based curve-fitting program for the computation of RIA data

    International Nuclear Information System (INIS)

    Malan, P.G.; Ekins, R.P.; Cox, M.G.; Long, E.M.R.

    1977-01-01

    In this paper, a comparison will be made of model-based and empirical curve-fitting procedures. The implementation of a multiple binding-site curve-fitting model which will successfully fit a wide range of assay data, and which can be run on a mini-computer is described. The latter sophisticated model also provides estimates of binding site concentrations and the values of the respective equilibrium constants present: the latter have been used for refining assay conditions using computer optimisation techniques. (orig./AJ) [de

  2. Acceptance of Addiction Prevention Exiting Methods and Presentation of Appropriate Model

    Directory of Open Access Journals (Sweden)

    Ali Asghar Savad-Kouhi

    2006-10-01

    Full Text Available Objective: The aim of this study is assessment of acceptance of addiction prevention existing methods and design and present of appropriate model. Materials & Methods: This research has done by survey and desariptive method by using questionnaire we assessed knowledge and belief of people about suggesting and existing methods of addiction prevention and their acceptence and finally design new and appropriate model of addiction prevention. For designing questionnaire, first exports and professors were openly interviewed and according their views final questionnaire was planned. We used questionnaire with 2 open ended and 61 close-ended tests for gathering data. The subjects of research were 2500 persons 13-35 years old that were selected by randomized sampling from 15 provinces. Results: The findings showed that according to people who were studied, they have positive beliefs about prevention methods and their effectiveness. According to findings a good model is inclusive model that able to do in four level: knowledge, change believe and attitude, control and change behavior. Conclusion: The people of study belive that acceptance of suggesting and existing methods of addiction prevention are effective direct and indirect to others, and appropriate model is inclusive model.

  3. An acceptance model for smart glasses based tourism augmented reality

    Science.gov (United States)

    Obeidy, Waqas Khalid; Arshad, Haslina; Huang, Jiung Yao

    2017-10-01

    Recent mobile technologies have revolutionized the way people experience their environment. Although, there is only limited research on users' acceptance of AR in the cultural tourism context, previous researchers have explored the opportunities of using augmented reality (AR) in order to enhance user experience. Recent AR research lack works that integrates dimensions which are specific to cultural tourism and smart glass specific context. Hence, this work proposes an AR acceptance model in the context of cultural heritage tourism and smart glasses capable of performing augmented reality. Therefore, in this paper we aim to present an AR acceptance model to understand the AR usage behavior and visiting intention for tourists who use Smart Glass based AR at UNESCO cultural heritage destinations in Malaysia. Furthermore, this paper identifies information quality, technology readiness, visual appeal, and facilitating conditions as external variables and key factors influencing visitors' beliefs, attitudes and usage intention.

  4. Responsible technology acceptance

    DEFF Research Database (Denmark)

    Toft, Madeleine Broman; Schuitema, Geertje; Thøgersen, John

    2014-01-01

    As a response to climate change and the desire to gain independence from imported fossil fuels, there is a pressure to increase the proportion of electricity from renewable sources which is one of the reasons why electricity grids are currently being turned into Smart Grids. In this paper, we focus...... on private consumers’ acceptance of having Smart Grid technology installed in their home. We analyse acceptance in a combined framework of the Technology Acceptance Model and the Norm Activation Model. We propose that individuals are only likely to accept Smart Grid technology if they assess usefulness...... in terms of a positive impact for society and the environment. Therefore, we expect that Smart Grid technology acceptance can be better explained when the well-known technology acceptance parameters included in the Technology Acceptance Model are supplemented by moral norms as suggested by the Norm...

  5. Bayesian methodology for reliability model acceptance

    International Nuclear Information System (INIS)

    Zhang Ruoxue; Mahadevan, Sankaran

    2003-01-01

    This paper develops a methodology to assess the reliability computation model validity using the concept of Bayesian hypothesis testing, by comparing the model prediction and experimental observation, when there is only one computational model available to evaluate system behavior. Time-independent and time-dependent problems are investigated, with consideration of both cases: with and without statistical uncertainty in the model. The case of time-independent failure probability prediction with no statistical uncertainty is a straightforward application of Bayesian hypothesis testing. However, for the life prediction (time-dependent reliability) problem, a new methodology is developed in this paper to make the same Bayesian hypothesis testing concept applicable. With the existence of statistical uncertainty in the model, in addition to the application of a predictor estimator of the Bayes factor, the uncertainty in the Bayes factor is explicitly quantified through treating it as a random variable and calculating the probability that it exceeds a specified value. The developed method provides a rational criterion to decision-makers for the acceptance or rejection of the computational model

  6. Cardiovascular Fitness of a Pediatric Population in Central Kampala ...

    African Journals Online (AJOL)

    There was significant gender difference in cardiovascular fitness endurance with boys recording higher mean score (1591±356.76) than girls (1440.64±236.72). Majority (71%) of pupils met acceptable cardiovascular fitness endurance according to percentile norms set by American Association of Health, Physical Education ...

  7. Using the Flipchem Photochemistry Model When Fitting Incoherent Scatter Radar Data

    Science.gov (United States)

    Reimer, A. S.; Varney, R. H.

    2017-12-01

    The North face Resolute Bay Incoherent Scatter Radar (RISR-N) routinely images the dynamics of the polar ionosphere, providing measurements of the plasma density, electron temperature, ion temperature, and line of sight velocity with seconds to minutes time resolution. RISR-N does not directly measure ionospheric parameters, but backscattered signals, recording them as voltage samples. Using signal processing techniques, radar autocorrelation functions (ACF) are estimated from the voltage samples. A model of the signal ACF is then fitted to the ACF using non-linear least-squares techniques to obtain the best-fit ionospheric parameters. The signal model, and therefore the fitted parameters, depend on the ionospheric ion composition that is used [e.g. Zettergren et. al. (2010), Zou et. al. (2017)].The software used to process RISR-N ACF data includes the "flipchem" model, which is an ion photochemistry model developed by Richards [2011] that was adapted from the Field LineInterhemispheric Plasma (FLIP) model. Flipchem requires neutral densities, neutral temperatures, electron density, ion temperature, electron temperature, solar zenith angle, and F10.7 as inputs to compute ion densities, which are input to the signal model. A description of how the flipchem model is used in RISR-N fitting software will be presented. Additionally, a statistical comparison of the fitted electron density, ion temperature, electron temperature, and velocity obtained using a flipchem ionosphere, a pure O+ ionosphere, and a Chapman O+ ionosphere will be presented. The comparison covers nearly two years of RISR-N data (April 2015 - December 2016). Richards, P. G. (2011), Reexamination of ionospheric photochemistry, J. Geophys. Res., 116, A08307, doi:10.1029/2011JA016613.Zettergren, M., Semeter, J., Burnett, B., Oliver, W., Heinselman, C., Blelly, P.-L., and Diaz, M.: Dynamic variability in F-region ionospheric composition at auroral arc boundaries, Ann. Geophys., 28, 651-664, https

  8. Fitting Latent Cluster Models for Networks with latentnet

    Directory of Open Access Journals (Sweden)

    Pavel N. Krivitsky

    2007-12-01

    Full Text Available latentnet is a package to fit and evaluate statistical latent position and cluster models for networks. Hoff, Raftery, and Handcock (2002 suggested an approach to modeling networks based on positing the existence of an latent space of characteristics of the actors. Relationships form as a function of distances between these characteristics as well as functions of observed dyadic level covariates. In latentnet social distances are represented in a Euclidean space. It also includes a variant of the extension of the latent position model to allow for clustering of the positions developed in Handcock, Raftery, and Tantrum (2007.The package implements Bayesian inference for the models based on an Markov chain Monte Carlo algorithm. It can also compute maximum likelihood estimates for the latent position model and a two-stage maximum likelihood method for the latent position cluster model. For latent position cluster models, the package provides a Bayesian way of assessing how many groups there are, and thus whether or not there is any clustering (since if the preferred number of groups is 1, there is little evidence for clustering. It also estimates which cluster each actor belongs to. These estimates are probabilistic, and provide the probability of each actor belonging to each cluster. It computes four types of point estimates for the coefficients and positions: maximum likelihood estimate, posterior mean, posterior mode and the estimator which minimizes Kullback-Leibler divergence from the posterior. You can assess the goodness-of-fit of the model via posterior predictive checks. It has a function to simulate networks from a latent position or latent position cluster model.

  9. A Case-Based Exploration of Task/Technology Fit in a Knowledge Management Context

    Science.gov (United States)

    2008-03-01

    have a difficult time articulating to others. Researchers who subscribe to the constructionist perspective view knowledge as an inherently social ...Acceptance Model With Task-Technology Fit Constructs. Information & Management, 36, 9-21. Dooley, D. (2001). Social Research Methods (4th ed.). Upper...L. (2006). Social Research Methods : Qualitative and Quantitative Approaches (6 ed.). Boston: Pearson Education, Inc. Nonaka, I. (1994). A Dynamic

  10. Twitter classification model: the ABC of two million fitness tweets.

    Science.gov (United States)

    Vickey, Theodore A; Ginis, Kathleen Martin; Dabrowski, Maciej

    2013-09-01

    The purpose of this project was to design and test data collection and management tools that can be used to study the use of mobile fitness applications and social networking within the context of physical activity. This project was conducted over a 6-month period and involved collecting publically shared Twitter data from five mobile fitness apps (Nike+, RunKeeper, MyFitnessPal, Endomondo, and dailymile). During that time, over 2.8 million tweets were collected, processed, and categorized using an online tweet collection application and a customized JavaScript. Using the grounded theory, a classification model was developed to categorize and understand the types of information being shared by application users. Our data show that by tracking mobile fitness app hashtags, a wealth of information can be gathered to include but not limited to daily use patterns, exercise frequency, location-based workouts, and overall workout sentiment.

  11. Is High-Intensity Functional Training (HIFT)/CrossFit Safe for Military Fitness Training?

    Science.gov (United States)

    Poston, Walker S C; Haddock, Christopher K; Heinrich, Katie M; Jahnke, Sara A; Jitnarin, Nattinee; Batchelor, David B

    2016-07-01

    High-intensity functional training (HIFT) is a promising fitness paradigm that gained popularity among military populations. Rather than biasing workouts toward maximizing fitness domains such as aerobic endurance, HIFT workouts are designed to promote general physical preparedness. HIFT programs have proliferated as a result of concerns about the relevance of traditional physical training (PT), which historically focused on aerobic condition via running. Other concerns about traditional PT include: (1) the relevance of service fitness tests given current combat demands, (2) the perception that military PT is geared toward passing service fitness tests, and (3) that training for combat requires more than just aerobic endurance. Despite its' popularity in the military, concerns have been raised about HIFT's injury potential, leading to some approaches being labeled as "extreme conditioning programs" by several military and civilian experts. Given HIFT programs' popularity in the military and concerns about injury, a review of data on HIFT injury potential is needed to inform military policy. The purpose of this review is to: (1) provide an overview of scientific methods used to appropriately compare injury rates among fitness activities and (2) evaluate scientific data regarding HIFT injury risk compared to traditional military PT and other accepted fitness activities. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

  12. User Acceptance of YouTube for Procedural Learning: An Extension of the Technology Acceptance Model

    Science.gov (United States)

    Lee, Doo Young; Lehto, Mark R.

    2013-01-01

    The present study was framed using the Technology Acceptance Model (TAM) to identify determinants affecting behavioral intention to use YouTube. Most importantly, this research emphasizes the motives for using YouTube, which is notable given its extrinsic task goal of being used for procedural learning tasks. Our conceptual framework included two…

  13. Assessing acceptance of assistive social agent technology by older adults: the Almere model

    NARCIS (Netherlands)

    Heerink, M.; Kröse, B.; Evers, V.; Wielinga, B.

    2010-01-01

    This paper proposes a model of technology acceptance that is specifically developed to test the acceptance of assistive social agents by elderly users. The research in this paper develops and tests an adaptation and theoretical extension of the Unified Theory of Acceptance and Use of Technology

  14. Acceptance and Utilization of Technology (UTAUT) as a Method of Technology Acceptance Model of Mitigation Disaster Website

    Science.gov (United States)

    Siswanto, T.; Shofiati, R.; Hartini, H.

    2018-01-01

    www.mitigasi-bencana.com as a knowledge management website created based on survey results in April-July 2014 in East Java and Central Java provinces, indicates a gap between the expectations and reality that exist in the services provided by the regional disaster management agency. Based on condition analysis, the gaps that occur can be reduced if the community has the understanding and knowledge of adequate disaster mitigation. The problem that arises later is whether the chosen technology solution is appropriate and acceptable to the public? The methodology used in this study using the Technology Acceptance Model development is the Unified Theory of Acceptance and Utilization of Technology (UTAUT). Feedback obtained from respondents KarangTaruna youth SelogedongBantul, www.mitigasi-bencana.com can be accepted by the respondents, but from processed data is obtained only UTAUT hypotheses on the relationship dimension eligible for Social Expectancy on the Attitude toward technology, which means the higher the perception of the Social Expectancy, the higher the perception of the Attitude toward technology. Because www.mitigasi-bencana.com is new socialized so that society still need time to explore content information and knowledge contained therein. To be accepted by user, a knowledge management application must prepare various aspects of Performance Expectancy, Effort Expectancy, Social Factors, Facilitating Conditions and Attitude.

  15. Application of the Technology Acceptance Model (TAM) in electronic ...

    African Journals Online (AJOL)

    Application of the Technology Acceptance Model (TAM) in electronic ticket purchase for ... current study examined the perceived usefulness and ease of use of online technology ... The findings are discussed in the light of these perspectives.

  16. A Global Moving Hotspot Reference Frame: How well it fits?

    Science.gov (United States)

    Doubrovine, P. V.; Steinberger, B.; Torsvik, T. H.

    2010-12-01

    Since the early 1970s, when Jason Morgan proposed that hotspot tracks record motion of lithosphere over deep-seated mantle plumes, the concept of fixed hotspots has dominated the way we think about absolute plate reconstructions. In the last decade, with compelling evidence for southward drift of the Hawaiian hotspot from paleomagnetic studies, and for the relative motion between the Pacific and Indo-Atlantic hotspots from refined plate circuit reconstructions, the perception changed and a global moving hotspot reference frame (GMHRF) was introduced, in which numerical models of mantle convection and advection of plume conduits in the mantle flow were used to estimate hotspot motion. This reference frame showed qualitatively better performance in fitting hotspot tracks globally, but the error analysis and formal estimates of the goodness of fitted rotations were lacking in this model. Here we present a new generation of the GMHRF, in which updated plate circuit reconstructions and radiometric age data from the hotspot tracks were combined with numerical models of plume motion, and uncertainties of absolute plate rotations were estimated through spherical regression analysis. The overall quality of fit was evaluated using a formal statistical test, by comparing misfits produced by the model with uncertainties assigned to the data. Alternative plate circuit models linking the Pacific plate to the plates of Indo-Atlantic hemisphere were tested and compared to the fixed hotspot models with identical error budgets. Our results show that, with an appropriate choice of the Pacific plate circuit, it is possible to reconcile relative plate motions and modeled motions of mantle plumes globally back to Late Cretaceous time (80 Ma). In contrast, all fixed hotspot models failed to produce acceptable fits for Paleogene to Late Cretaceous time (30-80 Ma), highlighting significance of relative motion between the Pacific and Indo-Atlantic hotspots during this interval. The

  17. User Acceptance of Long-Term Evolution (LTE) Services: An Application of Extended Technology Acceptance Model

    Science.gov (United States)

    Park, Eunil; Kim, Ki Joon

    2013-01-01

    Purpose: The aim of this paper is to propose an integrated path model in order to explore user acceptance of long-term evolution (LTE) services by examining potential causal relationships between key psychological factors and user intention to use the services. Design/methodology/approach: Online survey data collected from 1,344 users are analysed…

  18. Brief communication: human cranial variation fits iterative founder effect model with African origin.

    Science.gov (United States)

    von Cramon-Taubadel, Noreen; Lycett, Stephen J

    2008-05-01

    Recent studies comparing craniometric and neutral genetic affinity matrices have concluded that, on average, human cranial variation fits a model of neutral expectation. While human craniometric and genetic data fit a model of isolation by geographic distance, it is not yet clear whether this is due to geographically mediated gene flow or human dispersal events. Recently, human genetic data have been shown to fit an iterative founder effect model of dispersal with an African origin, in line with the out-of-Africa replacement model for modern human origins, and Manica et al. (Nature 448 (2007) 346-349) have demonstrated that human craniometric data also fit this model. However, in contrast with the neutral model of cranial evolution suggested by previous studies, Manica et al. (2007) made the a priori assumption that cranial form has been subject to climatically driven natural selection and therefore correct for climate prior to conducting their analyses. Here we employ a modified theoretical and methodological approach to test whether human cranial variability fits the iterative founder effect model. In contrast with Manica et al. (2007) we employ size-adjusted craniometric variables, since climatic factors such as temperature have been shown to correlate with aspects of cranial size. Despite these differences, we obtain similar results to those of Manica et al. (2007), with up to 26% of global within-population craniometric variation being explained by geographic distance from sub-Saharan Africa. Comparative analyses using non-African origins do not yield significant results. The implications of these results are discussed in the light of the modern human origins debate. (c) 2007 Wiley-Liss, Inc.

  19. Rapid world modeling: Fitting range data to geometric primitives

    International Nuclear Information System (INIS)

    Feddema, J.; Little, C.

    1996-01-01

    For the past seven years, Sandia National Laboratories has been active in the development of robotic systems to help remediate DOE's waste sites and decommissioned facilities. Some of these facilities have high levels of radioactivity which prevent manual clean-up. Tele-operated and autonomous robotic systems have been envisioned as the only suitable means of removing the radioactive elements. World modeling is defined as the process of creating a numerical geometric model of a real world environment or workspace. This model is often used in robotics to plan robot motions which perform a task while avoiding obstacles. In many applications where the world model does not exist ahead of time, structured lighting, laser range finders, and even acoustical sensors have been used to create three dimensional maps of the environment. These maps consist of thousands of range points which are difficult to handle and interpret. This paper presents a least squares technique for fitting range data to planar and quadric surfaces, including cylinders and ellipsoids. Once fit to these primitive surfaces, the amount of data associated with a surface is greatly reduced up to three orders of magnitude, thus allowing for more rapid handling and analysis of world data

  20. Kernel-density estimation and approximate Bayesian computation for flexible epidemiological model fitting in Python.

    Science.gov (United States)

    Irvine, Michael A; Hollingsworth, T Déirdre

    2018-05-26

    Fitting complex models to epidemiological data is a challenging problem: methodologies can be inaccessible to all but specialists, there may be challenges in adequately describing uncertainty in model fitting, the complex models may take a long time to run, and it can be difficult to fully capture the heterogeneity in the data. We develop an adaptive approximate Bayesian computation scheme to fit a variety of epidemiologically relevant data with minimal hyper-parameter tuning by using an adaptive tolerance scheme. We implement a novel kernel density estimation scheme to capture both dispersed and multi-dimensional data, and directly compare this technique to standard Bayesian approaches. We then apply the procedure to a complex individual-based simulation of lymphatic filariasis, a human parasitic disease. The procedure and examples are released alongside this article as an open access library, with examples to aid researchers to rapidly fit models to data. This demonstrates that an adaptive ABC scheme with a general summary and distance metric is capable of performing model fitting for a variety of epidemiological data. It also does not require significant theoretical background to use and can be made accessible to the diverse epidemiological research community. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

  1. Model-independent partial wave analysis using a massively-parallel fitting framework

    Science.gov (United States)

    Sun, L.; Aoude, R.; dos Reis, A. C.; Sokoloff, M.

    2017-10-01

    The functionality of GooFit, a GPU-friendly framework for doing maximum-likelihood fits, has been extended to extract model-independent {\\mathscr{S}}-wave amplitudes in three-body decays such as D + → h + h + h -. A full amplitude analysis is done where the magnitudes and phases of the {\\mathscr{S}}-wave amplitudes are anchored at a finite number of m 2(h + h -) control points, and a cubic spline is used to interpolate between these points. The amplitudes for {\\mathscr{P}}-wave and {\\mathscr{D}}-wave intermediate states are modeled as spin-dependent Breit-Wigner resonances. GooFit uses the Thrust library, with a CUDA backend for NVIDIA GPUs and an OpenMP backend for threads with conventional CPUs. Performance on a variety of platforms is compared. Executing on systems with GPUs is typically a few hundred times faster than executing the same algorithm on a single CPU.

  2. Examining the Factors Affecting PDA Acceptance among Physicians: An Extended Technology Acceptance Model.

    Science.gov (United States)

    Basak, Ecem; Gumussoy, Cigdem Altin; Calisir, Fethi

    2015-01-01

    This study aims at identifying the factors affecting the intention to use personal digital assistant (PDA) technology among physicians in Turkey using an extended Technology Acceptance Model (TAM). A structural equation-modeling approach was used to identify the variables that significantly affect the intention to use PDA technology. The data were collected from 339 physicians in Turkey. Results indicated that 71% of the physicians' intention to use PDA technology is explained by perceived usefulness and perceived ease of use. On comparing both, the perceived ease of use has the strongest effect, whereas the effect of perceived enjoyment on behavioral intention to use is found to be insignificant. This study concludes with the recommendations for managers and possible future research.

  3. The technology acceptance model: its past and its future in health care.

    Science.gov (United States)

    Holden, Richard J; Karsh, Ben-Tzion

    2010-02-01

    Increasing interest in end users' reactions to health information technology (IT) has elevated the importance of theories that predict and explain health IT acceptance and use. This paper reviews the application of one such theory, the Technology Acceptance Model (TAM), to health care. We reviewed 16 data sets analyzed in over 20 studies of clinicians using health IT for patient care. Studies differed greatly in samples and settings, health ITs studied, research models, relationships tested, and construct operationalization. Certain TAM relationships were consistently found to be significant, whereas others were inconsistent. Several key relationships were infrequently assessed. Findings show that TAM predicts a substantial portion of the use or acceptance of health IT, but that the theory may benefit from several additions and modifications. Aside from improved study quality, standardization, and theoretically motivated additions to the model, an important future direction for TAM is to adapt the model specifically to the health care context, using beliefs elicitation methods.

  4. Goodness-of-fit tests for multi-dimensional copulas: Expanding application to historical drought data

    Directory of Open Access Journals (Sweden)

    Ming-wei Ma

    2013-01-01

    Full Text Available The question of how to choose a copula model that best fits a given dataset is a predominant limitation of the copula approach, and the present study aims to investigate the techniques of goodness-of-fit tests for multi-dimensional copulas. A goodness-of-fit test based on Rosenblatt's transformation was mathematically expanded from two dimensions to three dimensions and procedures of a bootstrap version of the test were provided. Through stochastic copula simulation, an empirical application of historical drought data at the Lintong Gauge Station shows that the goodness-of-fit tests perform well, revealing that both trivariate Gaussian and Student t copulas are acceptable for modeling the dependence structures of the observed drought duration, severity, and peak. The goodness-of-fit tests for multi-dimensional copulas can provide further support and help a lot in the potential applications of a wider range of copulas to describe the associations of correlated hydrological variables. However, for the application of copulas with the number of dimensions larger than three, more complicated computational efforts as well as exploration and parameterization of corresponding copulas are required.

  5. Empirical investigation of e-learning acceptance and assimilation: A structural equation model

    Directory of Open Access Journals (Sweden)

    Said S. Al-Gahtani

    2016-01-01

    Full Text Available E-learning has become progressively more vital for academia and corporate training and has potentially become one of the most significant developments and applications in Information Technologies (ITs. This study used a quantitative approach seeking a causative explanation of the decision behavior of individuals toward the acceptance and assimilation of e-learning in academic settings. A survey of 286 participants (students was conducted to collect the research data. Our study framework was based on the third version of the Technology Acceptance Model (i.e., TAM3 and the data were analyzed using structural equation modeling in order to determine the factors that influence the learners’ intention to use e-learning. Results show the predicting (promoting/inhibiting factors of e-learning technology acceptance, while also examining some related post-implementation interventions expected to contribute to the acceptance and assimilation of e-learning systems. Our results also indicate that TAM3 holds well in the Arabian culture and also outline valuable outcomes such as: managerial interventions and controls for better organizational e-learning management that can lead to greater acceptance and effective utilization. Hopefully, this study provides a roadmap to more understanding of the success factors and post-implementation interventions contributing to the acceptance and assimilation of e-learning systems in developing countries.

  6. Fitting and comparing competing models of the species abundance distribution: assessment and prospect

    Directory of Open Access Journals (Sweden)

    Thomas J Matthews

    2014-06-01

    Full Text Available A species abundance distribution (SAD characterises patterns in the commonness and rarity of all species within an ecological community. As such, the SAD provides the theoretical foundation for a number of other biogeographical and macroecological patterns, such as the species–area relationship, as well as being an interesting pattern in its own right. While there has been resurgence in the study of SADs in the last decade, less focus has been placed on methodology in SAD research, and few attempts have been made to synthesise the vast array of methods which have been employed in SAD model evaluation. As such, our review has two aims. First, we provide a general overview of SADs, including descriptions of the commonly used distributions, plotting methods and issues with evaluating SAD models. Second, we review a number of recent advances in SAD model fitting and comparison. We conclude by providing a list of recommendations for fitting and evaluating SAD models. We argue that it is time for SAD studies to move away from many of the traditional methods available for fitting and evaluating models, such as sole reliance on the visual examination of plots, and embrace statistically rigorous techniques. In particular, we recommend the use of both goodness-of-fit tests and model-comparison analyses because each provides unique information which one can use to draw inferences.

  7. Fitting direct covariance structures by the MSTRUCT modeling language of the CALIS procedure.

    Science.gov (United States)

    Yung, Yiu-Fai; Browne, Michael W; Zhang, Wei

    2015-02-01

    This paper demonstrates the usefulness and flexibility of the general structural equation modelling (SEM) approach to fitting direct covariance patterns or structures (as opposed to fitting implied covariance structures from functional relationships among variables). In particular, the MSTRUCT modelling language (or syntax) of the CALIS procedure (SAS/STAT version 9.22 or later: SAS Institute, 2010) is used to illustrate the SEM approach. The MSTRUCT modelling language supports a direct covariance pattern specification of each covariance element. It also supports the input of additional independent and dependent parameters. Model tests, fit statistics, estimates, and their standard errors are then produced under the general SEM framework. By using numerical and computational examples, the following tests of basic covariance patterns are illustrated: sphericity, compound symmetry, and multiple-group covariance patterns. Specification and testing of two complex correlation structures, the circumplex pattern and the composite direct product models with or without composite errors and scales, are also illustrated by the MSTRUCT syntax. It is concluded that the SEM approach offers a general and flexible modelling of direct covariance and correlation patterns. In conjunction with the use of SAS macros, the MSTRUCT syntax provides an easy-to-use interface for specifying and fitting complex covariance and correlation structures, even when the number of variables or parameters becomes large. © 2014 The British Psychological Society.

  8. Factors Influencing Rural End-Users' Acceptance of e-Health in Developing Countries: A study on Portable Health Clinic in Bangladesh.

    Science.gov (United States)

    Hossain, Nazmul; Yokota, Fumihiko; Sultana, Nazneen; Ahmed, Ashir

    2018-04-17

    Existing studies regarding e-health are mostly focused on information technology design and implementation, system architecture and infrastructure, and its importance in public health with ancillaries and barriers to mass adoption. However, not enough studies have been conducted to assess the end-users' reaction and acceptance behavior toward e-health, especially from the perspective of rural communities in developing countries. The objective of this study is to explore the factors that influence rural end users' acceptance of e-health in Bangladesh. Data were collected between June and July 2016 through a field survey with structured questionnaire form 292 randomly selected rural respondents from Bheramara subdistrict, Bangladesh. Technology Acceptance Model was adopted as the research framework. Logistic regression analysis was performed to test the theoretical model. The study found social reference as the most significantly influential variable (Coef. = 2.28, odds ratio [OR] = 9.73, p acceptance behavior. The model explains 54.70% deviance (R 2  = 0.5470) in the response variable with its constructs. The "Hosmer-Lemeshow" goodness-of-fit score (0.539) is also above the standard threshold (0.05), which indicates that the data fit well with the model. The study provides guidelines for the successful adoption of e-health among rural communities in developing countries. This also creates an opportunity for e-health technology developers and service providers to have a better understanding of their end users.

  9. Is High Intensity Functional Training (HIFT)/CrossFit® Safe for Military Fitness Training?

    Science.gov (United States)

    Poston, Walker S.C.; Haddock, Christopher K.; Heinrich, Katie M.; Jahnke, Sara A.; Jitnarin, Nattinee; Batchelor, David B.

    2016-01-01

    High-intensity functional training (HIFT) is a promising fitness paradigm that gained popularity among military populations. Rather than biasing workouts toward maximizing fitness domains such as aerobic endurance, HIFT workouts are designed to promote general physical preparedness. HIFT programs have proliferated due to concerns about the relevance of traditional physical training (PT), which historically focused on aerobic condition via running. Other concerns about traditional PT include: 1) the relevance of service fitness tests given current combat demands; 2) the perception that military PT is geared toward passing service fitness tests; and 3) that training for combat requires more than just aerobic endurance. Despite its’ popularity in the military, concerns have been raised about HIFT’s injury potential, leading to some approaches being labeled as “extreme conditioning programs” by several military and civilian experts. Given HIFT programs’ popularity in the military and concerns about injury, a review of data on HIFT injury potential is needed to inform military policy. The purpose of this review is to: 1) provide an overview of scientific methods used to appropriately compare injury rates among fitness activities; and 2) evaluate scientific data regarding HIFT injury risk compared to traditional military PT and other accepted fitness activities PMID:27391615

  10. A goodness-of-fit test for occupancy models with correlated within-season revisits

    Science.gov (United States)

    Wright, Wilson; Irvine, Kathryn M.; Rodhouse, Thomas J.

    2016-01-01

    Occupancy modeling is important for exploring species distribution patterns and for conservation monitoring. Within this framework, explicit attention is given to species detection probabilities estimated from replicate surveys to sample units. A central assumption is that replicate surveys are independent Bernoulli trials, but this assumption becomes untenable when ecologists serially deploy remote cameras and acoustic recording devices over days and weeks to survey rare and elusive animals. Proposed solutions involve modifying the detection-level component of the model (e.g., first-order Markov covariate). Evaluating whether a model sufficiently accounts for correlation is imperative, but clear guidance for practitioners is lacking. Currently, an omnibus goodnessof- fit test using a chi-square discrepancy measure on unique detection histories is available for occupancy models (MacKenzie and Bailey, Journal of Agricultural, Biological, and Environmental Statistics, 9, 2004, 300; hereafter, MacKenzie– Bailey test). We propose a join count summary measure adapted from spatial statistics to directly assess correlation after fitting a model. We motivate our work with a dataset of multinight bat call recordings from a pilot study for the North American Bat Monitoring Program. We found in simulations that our join count test was more reliable than the MacKenzie–Bailey test for detecting inadequacy of a model that assumed independence, particularly when serial correlation was low to moderate. A model that included a Markov-structured detection-level covariate produced unbiased occupancy estimates except in the presence of strong serial correlation and a revisit design consisting only of temporal replicates. When applied to two common bat species, our approach illustrates that sophisticated models do not guarantee adequate fit to real data, underscoring the importance of model assessment. Our join count test provides a widely applicable goodness-of-fit test and

  11. Model fit versus biological relevance: Evaluating photosynthesis-temperature models for three tropical seagrass species

    OpenAIRE

    Matthew P. Adams; Catherine J. Collier; Sven Uthicke; Yan X. Ow; Lucas Langlois; Katherine R. O’Brien

    2017-01-01

    When several models can describe a biological process, the equation that best fits the data is typically considered the best. However, models are most useful when they also possess biologically-meaningful parameters. In particular, model parameters should be stable, physically interpretable, and transferable to other contexts, e.g. for direct indication of system state, or usage in other model types. As an example of implementing these recommended requirements for model parameters, we evaluat...

  12. Insight into model mechanisms through automatic parameter fitting: a new methodological framework for model development.

    Science.gov (United States)

    Tøndel, Kristin; Niederer, Steven A; Land, Sander; Smith, Nicolas P

    2014-05-20

    Striking a balance between the degree of model complexity and parameter identifiability, while still producing biologically feasible simulations using modelling is a major challenge in computational biology. While these two elements of model development are closely coupled, parameter fitting from measured data and analysis of model mechanisms have traditionally been performed separately and sequentially. This process produces potential mismatches between model and data complexities that can compromise the ability of computational frameworks to reveal mechanistic insights or predict new behaviour. In this study we address this issue by presenting a generic framework for combined model parameterisation, comparison of model alternatives and analysis of model mechanisms. The presented methodology is based on a combination of multivariate metamodelling (statistical approximation of the input-output relationships of deterministic models) and a systematic zooming into biologically feasible regions of the parameter space by iterative generation of new experimental designs and look-up of simulations in the proximity of the measured data. The parameter fitting pipeline includes an implicit sensitivity analysis and analysis of parameter identifiability, making it suitable for testing hypotheses for model reduction. Using this approach, under-constrained model parameters, as well as the coupling between parameters within the model are identified. The methodology is demonstrated by refitting the parameters of a published model of cardiac cellular mechanics using a combination of measured data and synthetic data from an alternative model of the same system. Using this approach, reduced models with simplified expressions for the tropomyosin/crossbridge kinetics were found by identification of model components that can be omitted without affecting the fit to the parameterising data. Our analysis revealed that model parameters could be constrained to a standard deviation of on

  13. Efficient parallel implementation of active appearance model fitting algorithm on GPU.

    Science.gov (United States)

    Wang, Jinwei; Ma, Xirong; Zhu, Yuanping; Sun, Jizhou

    2014-01-01

    The active appearance model (AAM) is one of the most powerful model-based object detecting and tracking methods which has been widely used in various situations. However, the high-dimensional texture representation causes very time-consuming computations, which makes the AAM difficult to apply to real-time systems. The emergence of modern graphics processing units (GPUs) that feature a many-core, fine-grained parallel architecture provides new and promising solutions to overcome the computational challenge. In this paper, we propose an efficient parallel implementation of the AAM fitting algorithm on GPUs. Our design idea is fine grain parallelism in which we distribute the texture data of the AAM, in pixels, to thousands of parallel GPU threads for processing, which makes the algorithm fit better into the GPU architecture. We implement our algorithm using the compute unified device architecture (CUDA) on the Nvidia's GTX 650 GPU, which has the latest Kepler architecture. To compare the performance of our algorithm with different data sizes, we built sixteen face AAM models of different dimensional textures. The experiment results show that our parallel AAM fitting algorithm can achieve real-time performance for videos even on very high-dimensional textures.

  14. A PC microsimulation of a gap acceptance model for turning left at a T-junction

    NARCIS (Netherlands)

    Schaap, Nina; Dijck, T.; van Arem, Bart; Morsink, Peter L.J.

    2009-01-01

    Vehicles are controlled by sub-behavioral models in a microsimulation model, this includes the gap acceptance model where the decision about how to cross a junction is made. The critical gap in these models must serve as a threshold value to accept or reject the space between two successive vehicles

  15. Determinasi Faktor-Faktor Keamanan E-Banking Terhadap Kepercayaan dengan Pendekatan Technology Acceptance Model

    Directory of Open Access Journals (Sweden)

    M. Haris Qamaruzzaman

    2014-01-01

    Full Text Available Safety  and  convenience  factor  is  important  for  confidence  in  the  use  of  e-banking.  This  study  aimed  to  investigate  the  factors determination  using  e-banking  approach  to  technology  acceptance  model,  and  analyze  the  determination  of  the  factors  the  use  of  ebanking  with  the  Technology  Acceptance  Model  approach.  Technology  Acceptance  Model  (TAM  is  a  model  used  to  explain  the acceptance of the technology to be used by users of the technology. In the context of this study, TAM raises the safety factor and the factor of ease of use of e-banking to e-banking trust uses. This research is a field research (field research with a quantitative approach that examines the issues being studied. Sampling method using random sampling technique as much as 100 respondents. Data collection techniques are the primary data by distributing questionnaires to the users e-banking. While the secondary data that other reports related to research. The data analysis techniques used include descriptive statistics and analysis phases of statistical regression analysis. These results prove that the safety factor has a significant and positive effect on user confidence in e-banking proven Ho is rejected and Ha accepted  with  a  significance  level  of  0.001  (<0.05,  while  the  convenience  factor  also  has  a  positive  and  significant  impact  on  user confidence in e-banking proven Ho is rejected and Ha accepted with a significance level of 0.000 (<0.05.Keywords: Factor Security; Ease; Confidence Use of e-banking; Technology Acceptance Model (TAM

  16. Analisis Sikap Pengguna Paytren Menggunakan Technology Acceptance Model

    Directory of Open Access Journals (Sweden)

    Moh Siri

    2017-04-01

    Full Text Available Abstrak Semakin pesatnya aplikasi berbasis android mendorong masyarakat beralih dan menggunakan. Melakukan transaksi dan pembayaran ke loket-loket Paymen Point Online Bank (BPOB yang dirasa kurang membantu masyarakat dalam kegiatan transkasi. Oleh karenanya hadir sebuah layanan terknologi dibidang micropayment dengan perangkat lunak bernama PayTren yang dapat digunakan untuk pembayaran transaksi dalam jumlah kecil  (micropayment berbasis android yang merupakan salah satu alternatif tepat dan bermanfaat untuk sarana mempermudah pengguna dalam melakukan transaksi atau pembayaran serta mampu menggeser jenis pembayaran pada loket-loket pembayaran pada umumnya. Tujuan dalam penelitian ini adalah untuk menganalisis sikap pengguna aplikasi PayTren berbasis android dengan menggunakan metode Technology Acceptance Model (TAM, serta pengujian menggunakan analisis regresi. Manfaat penelitian ini adalah sebagai referensi untuk penelitian selanjutnya dengan menggunakan metode TAM dan ditambahkan variabel yang lain. Hasil dari penelitian ini persepsi kegunaan (perceived usefullness dan persepi kemudahan (perceived easy of use memiliki pengaruh yang dikategorikan kuat dan lemah terhadap (attitude toward using sikap pengguna. Kata Kunci: Aplikasi, Android, PayTren, Technology Acceptance Model.                                                                                                                             Abstract The more rapid the android-based applications are pushing the community move on and use. Transaction and payment to the counter-the counter of Paymen Point Online Bank (BPOB where less help the community in dealings. Therefore present a terknologi service in the field of micropayment with software called PayTren that can be used for payment transactions in small amounts (micropayment android-based which is one of the alternatives is right and beneficial for the means of

  17. Examining the Moderating Effect of Individual-Level Cultural Values on Users' Acceptance of E-Learning in Developing Countries: A Structural Equation Modeling of an Extended Technology Acceptance Model

    Science.gov (United States)

    Tarhini, Ali; Hone, Kate; Liu, Xiaohui; Tarhini, Takwa

    2017-01-01

    In this study, we examine the effects of individual-level culture on the adoption and acceptance of e-learning tools by students in Lebanon using a theoretical framework based on the Technology Acceptance Model (TAM). To overcome possible limitations of using TAM in developing countries, we extend TAM to include "subjective norms" (SN)…

  18. [Study on the effect of different impression methods on the marginal fit of all-ceramic crowns].

    Science.gov (United States)

    Zhan, Lilin; Zeng, Liwei; Chen, Ping; Liao, Lan; Li, Shiyue; Liu, Renying

    2015-08-01

    To investigate the effect of three different impression methods on the marginal fit of all-ceramic crowns. The three methods include scanning silicone rubber impression, cast models, and direct optical impression. The polymethyl methacrylate (PMMA) material of a mandibular first molar in standard model was prepared with 16 models duplicated. The all-ceramic crowns were prepared using three different impression methods. Accurate impressions were made using silicone rubber, and the cast models were obtained. The PMMA models, silicone rubber impressions, and cast models were scanned, and digital models of three groups were obtained to produce 48 zirconia all-ceramic crowns with computer aided design/computer aided manufacture. The marginal fit of these groups was measured by silicone rubber gap impression. Statistical analysis was performed with SPSS 17.0 software. The marginal fit of direct optical impression groups, silicone rubber impression groups, cast model groups was (69.18±9.47), (81.04±10.88), (84.42±9.96) µm. A significant difference was observed in the marginal fit of the direct optical impression groups and the other groups (Pimpression groups and the cast model groups (P>0.05). All marginal measurement sites are clinically acceptable by the three different impression scanning methods. The silicone rubber impression scanning method can be used for all-ceramic restorations.

  19. ARA and ARI imperfect repair models: Estimation, goodness-of-fit and reliability prediction

    International Nuclear Information System (INIS)

    Toledo, Maria Luíza Guerra de; Freitas, Marta A.; Colosimo, Enrico A.; Gilardoni, Gustavo L.

    2015-01-01

    An appropriate maintenance policy is essential to reduce expenses and risks related to equipment failures. A fundamental aspect to be considered when specifying such policies is to be able to predict the reliability of the systems under study, based on a well fitted model. In this paper, the classes of models Arithmetic Reduction of Age and Arithmetic Reduction of Intensity are explored. Likelihood functions for such models are derived, and a graphical method is proposed for model selection. A real data set involving failures in trucks used by a Brazilian mining is analyzed considering models with different memories. Parameters, namely, shape and scale for Power Law Process, and the efficiency of repair were estimated for the best fitted model. Estimation of model parameters allowed us to derive reliability estimators to predict the behavior of the failure process. These results are a valuable information for the mining company and can be used to support decision making regarding preventive maintenance policy. - Highlights: • Likelihood functions for imperfect repair models are derived. • A goodness-of-fit technique is proposed as a tool for model selection. • Failures in trucks owned by a Brazilian mining are modeled. • Estimation allowed deriving reliability predictors to forecast the future failure process of the trucks

  20. Cross-national comparisons of college students' attitudes toward diet/fitness apps on smartphones.

    Science.gov (United States)

    Cho, Jaehee; Lee, H Erin; Quinlan, Margaret

    2017-10-01

    Based on the technology acceptance model (TAM), we explored the nationally-bounded roles of four predictors (subjective norms, entertainment, recordability, and networkability) in determining the TAM variables of perceived usefulness (PU), perceived ease of use (PEOU), and behavioral intention (BI) to use diet/fitness apps on smartphones. College students in the US and South Korea were invited to participate in a survey. We obtained 508 questionnaires (304 from the US and 204 from Korea). Data were analyzed mainly through path analysis. The four factors positively predicted the PU and PEOU of diet/fitness apps. While the effects of the predictors on the three TAM components were generally stronger among the US students than Korean students, the effect of subjective norms on the BI of diet/fitness apps was weaker among Korean students. Findings from the cross-national comparisons were helpful for thoroughly understanding the contextualized mechanisms involved in the adoption of diet/fitness apps.

  1. Person-fit to the Five Factor Model of personality

    Czech Academy of Sciences Publication Activity Database

    Allik, J.; Realo, A.; Mõttus, R.; Borkenau, P.; Kuppens, P.; Hřebíčková, Martina

    2012-01-01

    Roč. 71, č. 1 (2012), s. 35-45 ISSN 1421-0185 R&D Projects: GA ČR GAP407/10/2394 Institutional research plan: CEZ:AV0Z70250504 Keywords : Five Factor Model * cross - cultural comparison * person-fit Subject RIV: AN - Psychology Impact factor: 0.638, year: 2012

  2. Study on fitness functions of genetic algorithm for dynamically correcting nuclide atmospheric diffusion model

    International Nuclear Information System (INIS)

    Ji Zhilong; Ma Yuanwei; Wang Dezhong

    2014-01-01

    Background: In radioactive nuclides atmospheric diffusion models, the empirical dispersion coefficients were deduced under certain experiment conditions, whose difference with nuclear accident conditions is a source of deviation. A better estimation of the radioactive nuclide's actual dispersion process could be done by correcting dispersion coefficients with observation data, and Genetic Algorithm (GA) is an appropriate method for this correction procedure. Purpose: This study is to analyze the fitness functions' influence on the correction procedure and the forecast ability of diffusion model. Methods: GA, coupled with Lagrange dispersion model, was used in a numerical simulation to compare 4 fitness functions' impact on the correction result. Results: In the numerical simulation, the fitness function with observation deviation taken into consideration stands out when significant deviation exists in the observed data. After performing the correction procedure on the Kincaid experiment data, a significant boost was observed in the diffusion model's forecast ability. Conclusion: As the result shows, in order to improve dispersion models' forecast ability using GA, observation data should be given different weight in the fitness function corresponding to their error. (authors)

  3. Model Fitting for Predicted Precipitation in Darwin: Some Issues with Model Choice

    Science.gov (United States)

    Farmer, Jim

    2010-01-01

    In Volume 23(2) of the "Australian Senior Mathematics Journal," Boncek and Harden present an exercise in fitting a Markov chain model to rainfall data for Darwin Airport (Boncek & Harden, 2009). Days are subdivided into those with precipitation and precipitation-free days. The author abbreviates these labels to wet days and dry days.…

  4. Evaluation of marginal fit of two all-ceramic copings with two finish lines

    Science.gov (United States)

    Subasi, Gulce; Ozturk, Nilgun; Inan, Ozgur; Bozogullari, Nalan

    2012-01-01

    Objectives: This in-vitro study investigated the marginal fit of two all-ceramic copings with 2 finish line designs. Methods: Forty machined stainless steel molar die models with two different margin designs (chamfer and rounded shoulder) were prepared. A total of 40 standardized copings were fabricated and divided into 4 groups (n=10 for each finish line-coping material). Coping materials tested were IPS e.max Press and Zirkonzahn; luting agent was Variolink II. Marginal fit was evaluated after cementation with a stereomicroscope (Leica MZ16). Two-way analysis of variance and Tukey-HSD test were performed to assess the influence of each finish line design and ceramic type on the marginal fit of 2 all-ceramic copings (α =.05). Results: Two-way analysis of variance revealed no statistically significant differences for marginal fit relative to finish lines (P=.362) and ceramic types (P=.065). Conclusion: Within the limitations of this study, both types of all-ceramic copings demonstrated that the mean marginal fit was considered acceptable for clinical application (⩽120 μm). PMID:22509119

  5. Difficulties in fitting the thermal response of atomic force microscope cantilevers for stiffness calibration

    International Nuclear Information System (INIS)

    Cole, D G

    2008-01-01

    This paper discusses the difficulties of calibrating atomic force microscope (AFM) cantilevers, in particular the effect calibrating under light fluid-loading (in air) and under heavy fluid-loading (in water) has on the ability to use thermal motion response to fit model parameters that are used to determine cantilever stiffness. For the light fluid-loading case, the resonant frequency and quality factor can easily be used to determine stiffness. The extension of this approach to the heavy fluid-loading case is troublesome due to the low quality factor (high damping) caused by fluid-loading. Simple calibration formulae are difficult to realize, and the best approach is often to curve-fit the thermal response, using the parameters of natural frequency and mass ratio so that the curve-fit's response is within some acceptable tolerance of the actual thermal response. The parameters can then be used to calculate the cantilever stiffness. However, the process of curve-fitting can lead to erroneous results unless suitable care is taken. A feedback model of the fluid–structure interaction between the unloaded cantilever and the hydrodynamic drag provides a framework for fitting a modeled thermal response to a measured response and for evaluating the parametric uncertainty of the fit. The cases of uncertainty in the natural frequency, the mass ratio, and combined uncertainty are presented and the implications for system identification and stiffness calibration using curve-fitting techniques are discussed. Finally, considerations and recommendations for the calibration of AFM cantilevers are given in light of the results of this paper

  6. The Influence On Factors In Attitudes Toward Acceptance Of The Information System Using Technology Acceptance Model TAM Case Study SPAN System In Indonesia

    Directory of Open Access Journals (Sweden)

    Donny Maha Putra

    2015-08-01

    Full Text Available Theoretically and practically Technology Acceptance Model TAM is a model that is considered most appropriate in explaining how the user receives a system. This study aimed to analyze the factors that influence the attitudes towards the acceptance of Sistem Perbendaharaan Anggaran Negara SPAN using TAM approach. The problems raised in this research aims to determine the attitude of the use of the transition process lagecy system to the new system which for many users create conflict in the process of adaptation. On the basis of this proposed theoretical models to test hypotheses using Structural Equation Model SEM and analysis tool using lisrel. This research was conducted in all offices DG of Treasury of Ministry of Finance with 210 respondents were chosen at random to represent each office. The results of this study prove 4 hypothesis is accepted from 8 hypothesis namely a a negative affect with the results demonstrabilty b computer self-efficacy with the output quality c computer self-efficacy with the perceived ease of use d perceived ease of use with the perceived of usefulness. Overall indicates that the application of the SPAN system in the Ministry of Finance of In Indonesia can be accepted by users.

  7. An evaluation model for indoor environmental quality (IEQ) acceptance in residential buildings

    International Nuclear Information System (INIS)

    Lai, A.C.K.; Mui, K.W.; Wong, L.T.; Law, L.Y.

    2009-01-01

    The indoor environmental quality (IEQ) in residential buildings is examined from the prospect of an occupant's acceptance in four aspects: thermal comfort, indoor air quality, noise level and illumination level. Based on the evaluations by 125 occupants living in 32 typical residential apartments in Hong Kong, this study proposes empirical expressions to approximate the overall IEQ acceptance with respect to four contributors, namely operative temperature, carbon dioxide concentration, equivalent noise level and illumination level, via a multivariate logistic regression model. A range of IEQ acceptances for regular residential conditions is determined and the dependence of the predicted overall IEQ acceptance on the variations of the contributors is discussed. The proposed overall IEQ acceptance can be used as a quantitative assessment criterion for similar residential environments where an occupant's evaluation is expected. (author)

  8. Determinants of the Acceptance of Sustainable Production Strategies among Dairy Farmers: Development and Testing of a Modified Technology Acceptance Model

    Directory of Open Access Journals (Sweden)

    Simona Naspetti

    2017-10-01

    Full Text Available An extended version of the Technology Acceptance Model (TAM was applied by means of Structural Equation Modelling to testing various hypotheses on attitudes and intentions of dairy farmers towards three novel sustainable production strategies, as well as the influence of organic practices and collaborative behaviours, such as information sharing with supply-chain partners. Data on the acceptance of three sustainable production strategies, namely ‘Agro-forestry’, ‘Alternative protein source’, and ‘Prolonged maternal feeding’ were collected by a survey of dairy farmers in six European Union (EU countries (Austria, Belgium, Denmark, Finland, Italy, United Kingdom. We found that perceived usefulness is the key determinant of acceptance, while the intention to adopt a sustainable production strategy may derive from the influence of opinions (and behaviours of relevant others (e.g., leading dairy farmers, family members, advisors showing the role of interactions among farmers and other stakeholders in the adoption of innovations. Finally, the perceived usefulness of all of the investigated strategies is higher for organic farmers, while collaborative patterns reduce the impact of subjective norm on usefulness and overall acceptance. Our findings should encourage policy makers to consider the important role of supply chain management practices, including collaboration, to enhance the sustainability of dairy farming systems.

  9. Individual acceptance of the biogas innovation: A structural equation model

    International Nuclear Information System (INIS)

    Emmann, Carsten H.; Arens, Ludwig; Theuvsen, Ludwig

    2013-01-01

    The rapid spread of biogas production in Germany has resulted in an increased public debate over this new business branch. Today the production of biogas is much more controversially debated than several years ago. At the same time it could be proven that even among farmers themselves the acceptance of biogas production in some regions is somewhat dampened due to accompanying “collateral damages”. Therefore, the goal of this paper is to identify relevant influencing factors that determine the acceptance of the innovation “biogas” among farmers by applying a causal analysis. Initial results among the five investigated determinants show that not only an individual attitude toward biogas but also the farmers' personal innovativeness strongly and significantly influences an individual's acceptance of the innovation “biogas”. -- Highlights: •Strong expansion of biogas production based on renewable resources in Germany since 2004. •Low acceptance of biogas production in some regions. •Identification of influencing factors that determine the individual acceptance of the biogas innovation among German farmers. •Compared to existing studies, personal innovativeness was taken into account in the causal model. •Results are important for the further expansion of biogas production in Germany as well as in other countries

  10. Efficient Parallel Implementation of Active Appearance Model Fitting Algorithm on GPU

    Directory of Open Access Journals (Sweden)

    Jinwei Wang

    2014-01-01

    Full Text Available The active appearance model (AAM is one of the most powerful model-based object detecting and tracking methods which has been widely used in various situations. However, the high-dimensional texture representation causes very time-consuming computations, which makes the AAM difficult to apply to real-time systems. The emergence of modern graphics processing units (GPUs that feature a many-core, fine-grained parallel architecture provides new and promising solutions to overcome the computational challenge. In this paper, we propose an efficient parallel implementation of the AAM fitting algorithm on GPUs. Our design idea is fine grain parallelism in which we distribute the texture data of the AAM, in pixels, to thousands of parallel GPU threads for processing, which makes the algorithm fit better into the GPU architecture. We implement our algorithm using the compute unified device architecture (CUDA on the Nvidia’s GTX 650 GPU, which has the latest Kepler architecture. To compare the performance of our algorithm with different data sizes, we built sixteen face AAM models of different dimensional textures. The experiment results show that our parallel AAM fitting algorithm can achieve real-time performance for videos even on very high-dimensional textures.

  11. Local and omnibus goodness-of-fit tests in classical measurement error models

    KAUST Repository

    Ma, Yanyuan

    2010-09-14

    We consider functional measurement error models, i.e. models where covariates are measured with error and yet no distributional assumptions are made about the mismeasured variable. We propose and study a score-type local test and an orthogonal series-based, omnibus goodness-of-fit test in this context, where no likelihood function is available or calculated-i.e. all the tests are proposed in the semiparametric model framework. We demonstrate that our tests have optimality properties and computational advantages that are similar to those of the classical score tests in the parametric model framework. The test procedures are applicable to several semiparametric extensions of measurement error models, including when the measurement error distribution is estimated non-parametrically as well as for generalized partially linear models. The performance of the local score-type and omnibus goodness-of-fit tests is demonstrated through simulation studies and analysis of a nutrition data set.

  12. Development of a tripolar model of technology acceptance: Hospital-based physicians' perspective on EHR.

    Science.gov (United States)

    Beglaryan, Mher; Petrosyan, Varduhi; Bunker, Edward

    2017-06-01

    In health care, information technologies (IT) hold a promise to harness an ever-increasing flow of health related information and bring significant benefits including improved quality of care, efficiency, and cost containment. One of the main tools for collecting and utilizing health data is the Electronic Health Record (EHR). EHRs implementation can face numerous barriers to acceptance including attitudes and perceptions of potential users, required effort attributed to their implementation and usage, and resistance to change. Various theories explicate different aspects of technology deployment, implementation, and acceptance. One of the common theories is the Technology Acceptance Model (TAM), which helps to study the implementation of different healthcare IT applications. The objectives of this study are: to understand the barriers of EHR implementation from the perspective of physicians; to identify major determinants of physicians' acceptance of technology; and develop a model that explains better how EHRs (and technologies in general) are accepted by physicians. The proposed model derives from a cross-sectional survey of physicians selected through multi-stage cluster sampling from the hospitals of Yerevan, Armenia. The study team designed the survey instrument based on a literature review on barriers of EHR implementation. The analysis employed exploratory structural equation modeling (ESEM) with a robust weighted least squares (WLSMV) estimator for categorical indicators. The analysis progressed in two steps: appraisal of the measurement model and testing of the structural model. The derived model identifies the following factors as direct determinants of behavioral intention to use a novel technology: projected collective usefulness; personal innovativeness; patient influence; and resistance to change. Other factors (e.g., organizational change, professional relationships, administrative monitoring, organizational support and computer anxiety) exert their

  13. Universal Rate Model Selector: A Method to Quickly Find the Best-Fit Kinetic Rate Model for an Experimental Rate Profile

    Science.gov (United States)

    2017-08-01

    k2 – k1) 3.3 Universal Kinetic Rate Platform Development Kinetic rate models range from pure chemical reactions to mass transfer...14 8. The rate model that best fits the experimental data is a first-order or homogeneous catalytic reaction ...Avrami (7), and intraparticle diffusion (6) rate equations to name a few. A single fitting algorithm (kinetic rate model ) for a reaction does not

  14. The global electroweak Standard Model fit after the Higgs discovery

    CERN Document Server

    Baak, Max

    2013-01-01

    We present an update of the global Standard Model (SM) fit to electroweak precision data under the assumption that the new particle discovered at the LHC is the SM Higgs boson. In this scenario all parameters entering the calculations of electroweak precision observalbes are known, allowing, for the first time, to over-constrain the SM at the electroweak scale and assert its validity. Within the SM the W boson mass and the effective weak mixing angle can be accurately predicted from the global fit. The results are compatible with, and exceed in precision, the direct measurements. An updated determination of the S, T and U parameters, which parametrize the oblique vacuum corrections, is given. The obtained values show good consistency with the SM expectation and no direct signs of new physics are seen. We conclude with an outlook to the global electroweak fit for a future e+e- collider.

  15. Residuals and the Residual-Based Statistic for Testing Goodness of Fit of Structural Equation Models

    Science.gov (United States)

    Foldnes, Njal; Foss, Tron; Olsson, Ulf Henning

    2012-01-01

    The residuals obtained from fitting a structural equation model are crucial ingredients in obtaining chi-square goodness-of-fit statistics for the model. The authors present a didactic discussion of the residuals, obtaining a geometrical interpretation by recognizing the residuals as the result of oblique projections. This sheds light on the…

  16. Consumer Adoption of Future MyData-Based Preventive eHealth Services: An Acceptance Model and Survey Study.

    Science.gov (United States)

    Koivumäki, Timo; Pekkarinen, Saara; Lappi, Minna; Väisänen, Jere; Juntunen, Jouni; Pikkarainen, Minna

    2017-12-22

    Constantly increasing health care costs have led countries and health care providers to the point where health care systems must be reinvented. Consequently, electronic health (eHealth) has recently received a great deal of attention in social sciences in the domain of Internet studies. However, only a fraction of these studies focuses on the acceptability of eHealth, making consumers' subjective evaluation an understudied field. This study will address this gap by focusing on the acceptance of MyData-based preventive eHealth services from the consumer point of view. We are adopting the term "MyData", which according to a White Paper of the Finnish Ministry of Transport and Communication refers to "1) a new approach, a paradigm shift in personal data management and processing that seeks to transform the current organization centric system to a human centric system, 2) to personal data as a resource that the individual can access and control." The aim of this study was to investigate what factors influence consumers' intentions to use a MyData-based preventive eHealth service before use. We applied a new adoption model combining Venkatesh's unified theory of acceptance and use of technology 2 (UTAUT2) in a consumer context and three constructs from health behavior theories, namely threat appraisals, self-efficacy, and perceived barriers. To test the research model, we applied structural equation modeling (SEM) with Mplus software, version 7.4. A Web-based survey was administered. We collected 855 responses. We first applied traditional SEM for the research model, which was not statistically significant. We then tested for possible heterogeneity in the data by running a mixture analysis. We found that heterogeneity was not the cause for the poor performance of the research model. Thus, we moved on to model-generating SEM and ended up with a statistically significant empirical model (root mean square error of approximation [RMSEA] 0.051, Tucker-Lewis index [TLI] 0

  17. Using the PLUM procedure of SPSS to fit unequal variance and generalized signal detection models.

    Science.gov (United States)

    DeCarlo, Lawrence T

    2003-02-01

    The recent addition of aprocedure in SPSS for the analysis of ordinal regression models offers a simple means for researchers to fit the unequal variance normal signal detection model and other extended signal detection models. The present article shows how to implement the analysis and how to interpret the SPSS output. Examples of fitting the unequal variance normal model and other generalized signal detection models are given. The approach offers a convenient means for applying signal detection theory to a variety of research.

  18. Modeling of a Parabolic Trough Solar Field for Acceptance Testing: A Case Study

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, M. J.; Mehos, M. S.; Kearney, D. W.; McMahan, A. C.

    2011-01-01

    As deployment of parabolic trough concentrating solar power (CSP) systems ramps up, the need for reliable and robust performance acceptance test guidelines for the solar field is also amplified. Project owners and/or EPC contractors often require extensive solar field performance testing as part of the plant commissioning process in order to ensure that actual solar field performance satisfies both technical specifications and performance guaranties between the involved parties. Performance test code work is currently underway at the National Renewable Energy Laboratory (NREL) in collaboration with the SolarPACES Task-I activity, and within the ASME PTC-52 committee. One important aspect of acceptance testing is the selection of a robust technology performance model. NREL1 has developed a detailed parabolic trough performance model within the SAM software tool. This model is capable of predicting solar field, sub-system, and component performance. It has further been modified for this work to support calculation at subhourly time steps. This paper presents the methodology and results of a case study comparing actual performance data for a parabolic trough solar field to the predicted results using the modified SAM trough model. Due to data limitations, the methodology is applied to a single collector loop, though it applies to larger subfields and entire solar fields. Special consideration is provided for the model formulation, improvements to the model formulation based on comparison with the collected data, and uncertainty associated with the measured data. Additionally, this paper identifies modeling considerations that are of particular importance in the solar field acceptance testing process and uses the model to provide preliminary recommendations regarding acceptable steady-state testing conditions at the single-loop level.

  19. Fitting Diffusion Item Response Theory Models for Responses and Response Times Using the R Package diffIRT

    Directory of Open Access Journals (Sweden)

    Dylan Molenaar

    2015-08-01

    Full Text Available In the psychometric literature, item response theory models have been proposed that explicitly take the decision process underlying the responses of subjects to psychometric test items into account. Application of these models is however hampered by the absence of general and flexible software to fit these models. In this paper, we present diffIRT, an R package that can be used to fit item response theory models that are based on a diffusion process. We discuss parameter estimation and model fit assessment, show the viability of the package in a simulation study, and illustrate the use of the package with two datasets pertaining to extraversion and mental rotation. In addition, we illustrate how the package can be used to fit the traditional diffusion model (as it has been originally developed in experimental psychology to data.

  20. MODEL PERILAKU PENGGUNAAN TIK “NR2007” PENGEMBANGAN DARI TECHNOLOGY ACCEPTANCE MODEL (TAM

    Directory of Open Access Journals (Sweden)

    Neila Ramdhani

    2016-06-01

    Full Text Available This paper discusses and criticizes a Technology Acceptance Model which was developed by Fred D. Davis in 1986. TAM was built to predict the way people accept and adopt the technology. TAM was inspired by theory of reasoned action (TRA formulated by Martin Fishbein & Icek Ajzen in 1975, although the model does not completely adopt the TRA model. TAM does not include Subjective Norm as a factor in predicting the use of technology. As a theory, TAM has been used by many researchers to investigate the adoption of information technology. This model has a significant contribution in predicting the use of information communication technology (ICT in many areas. Since ICT users have various motivational backgrounds, some of them have a positive attitude toward ICT, but they do not use ICT. It seems the TAM model need to be improved by including Subjective Norms and Perceived Behavior Control as suggested by Ajzen in the theory of planned behavior (TPB as antecedents of intention to use ICT. Since the personality background of ICT users may also influence the use of ICT, the author proposes TAM‐NR‐2007 model that include personality traits as a background factor of attitude toward the behavior and subjective norms.

  1. Sustained fitness gains and variability in fitness trajectories in the long-term evolution experiment with Escherichia coli

    Science.gov (United States)

    Lenski, Richard E.; Wiser, Michael J.; Ribeck, Noah; Blount, Zachary D.; Nahum, Joshua R.; Morris, J. Jeffrey; Zaman, Luis; Turner, Caroline B.; Wade, Brian D.; Maddamsetti, Rohan; Burmeister, Alita R.; Baird, Elizabeth J.; Bundy, Jay; Grant, Nkrumah A.; Card, Kyle J.; Rowles, Maia; Weatherspoon, Kiyana; Papoulis, Spiridon E.; Sullivan, Rachel; Clark, Colleen; Mulka, Joseph S.; Hajela, Neerja

    2015-01-01

    Many populations live in environments subject to frequent biotic and abiotic changes. Nonetheless, it is interesting to ask whether an evolving population's mean fitness can increase indefinitely, and potentially without any limit, even in a constant environment. A recent study showed that fitness trajectories of Escherichia coli populations over 50 000 generations were better described by a power-law model than by a hyperbolic model. According to the power-law model, the rate of fitness gain declines over time but fitness has no upper limit, whereas the hyperbolic model implies a hard limit. Here, we examine whether the previously estimated power-law model predicts the fitness trajectory for an additional 10 000 generations. To that end, we conducted more than 1100 new competitive fitness assays. Consistent with the previous study, the power-law model fits the new data better than the hyperbolic model. We also analysed the variability in fitness among populations, finding subtle, but significant, heterogeneity in mean fitness. Some, but not all, of this variation reflects differences in mutation rate that evolved over time. Taken together, our results imply that both adaptation and divergence can continue indefinitely—or at least for a long time—even in a constant environment. PMID:26674951

  2. A flexible, interactive software tool for fitting the parameters of neuronal models.

    Science.gov (United States)

    Friedrich, Péter; Vella, Michael; Gulyás, Attila I; Freund, Tamás F; Káli, Szabolcs

    2014-01-01

    The construction of biologically relevant neuronal models as well as model-based analysis of experimental data often requires the simultaneous fitting of multiple model parameters, so that the behavior of the model in a certain paradigm matches (as closely as possible) the corresponding output of a real neuron according to some predefined criterion. Although the task of model optimization is often computationally hard, and the quality of the results depends heavily on technical issues such as the appropriate choice (and implementation) of cost functions and optimization algorithms, no existing program provides access to the best available methods while also guiding the user through the process effectively. Our software, called Optimizer, implements a modular and extensible framework for the optimization of neuronal models, and also features a graphical interface which makes it easy for even non-expert users to handle many commonly occurring scenarios. Meanwhile, educated users can extend the capabilities of the program and customize it according to their needs with relatively little effort. Optimizer has been developed in Python, takes advantage of open-source Python modules for nonlinear optimization, and interfaces directly with the NEURON simulator to run the models. Other simulators are supported through an external interface. We have tested the program on several different types of problems of varying complexity, using different model classes. As targets, we used simulated traces from the same or a more complex model class, as well as experimental data. We successfully used Optimizer to determine passive parameters and conductance densities in compartmental models, and to fit simple (adaptive exponential integrate-and-fire) neuronal models to complex biological data. Our detailed comparisons show that Optimizer can handle a wider range of problems, and delivers equally good or better performance than any other existing neuronal model fitting tool.

  3. A flexible, interactive software tool for fitting the parameters of neuronal models

    Directory of Open Access Journals (Sweden)

    Péter eFriedrich

    2014-07-01

    Full Text Available The construction of biologically relevant neuronal models as well as model-based analysis of experimental data often requires the simultaneous fitting of multiple model parameters, so that the behavior of the model in a certain paradigm matches (as closely as possible the corresponding output of a real neuron according to some predefined criterion. Although the task of model optimization is often computationally hard, and the quality of the results depends heavily on technical issues such as the appropriate choice (and implementation of cost functions and optimization algorithms, no existing program provides access to the best available methods while also guiding the user through the process effectively. Our software, called Optimizer, implements a modular and extensible framework for the optimization of neuronal models, and also features a graphical interface which makes it easy for even non-expert users to handle many commonly occurring scenarios. Meanwhile, educated users can extend the capabilities of the program and customize it according to their needs with relatively little effort. Optimizer has been developed in Python, takes advantage of open-source Python modules for nonlinear optimization, and interfaces directly with the NEURON simulator to run the models. Other simulators are supported through an external interface. We have tested the program on several different types of problem of varying complexity, using different model classes. As targets, we used simulated traces from the same or a more complex model class, as well as experimental data. We successfully used Optimizer to determine passive parameters and conductance densities in compartmental models, and to fit simple (adaptive exponential integrate-and-fire neuronal models to complex biological data. Our detailed comparisons show that Optimizer can handle a wider range of problems, and delivers equally good or better performance than any other existing neuronal model fitting

  4. Potential fitting biases resulting from grouping data into variable width bins

    International Nuclear Information System (INIS)

    Towers, S.

    2014-01-01

    When reading peer-reviewed scientific literature describing any analysis of empirical data, it is natural and correct to proceed with the underlying assumption that experiments have made good faith efforts to ensure that their analyses yield unbiased results. However, particle physics experiments are expensive and time consuming to carry out, thus if an analysis has inherent bias (even if unintentional), much money and effort can be wasted trying to replicate or understand the results, particularly if the analysis is fundamental to our understanding of the universe. In this note we discuss the significant biases that can result from data binning schemes. As we will show, if data are binned such that they provide the best comparison to a particular (but incorrect) model, the resulting model parameter estimates when fitting to the binned data can be significantly biased, leading us to too often accept the model hypothesis when it is not in fact true. When using binned likelihood or least squares methods there is of course no a priori requirement that data bin sizes need to be constant, but we show that fitting to data grouped into variable width bins is particularly prone to produce biased results if the bin boundaries are chosen to optimize the comparison of the binned data to a wrong model. The degree of bias that can be achieved simply with variable binning can be surprisingly large. Fitting the data with an unbinned likelihood method, when possible to do so, is the best way for researchers to show that their analyses are not biased by binning effects. Failing that, equal bin widths should be employed as a cross-check of the fitting analysis whenever possible

  5. Potential fitting biases resulting from grouping data into variable width bins

    Energy Technology Data Exchange (ETDEWEB)

    Towers, S., E-mail: smtowers@asu.edu

    2014-07-30

    When reading peer-reviewed scientific literature describing any analysis of empirical data, it is natural and correct to proceed with the underlying assumption that experiments have made good faith efforts to ensure that their analyses yield unbiased results. However, particle physics experiments are expensive and time consuming to carry out, thus if an analysis has inherent bias (even if unintentional), much money and effort can be wasted trying to replicate or understand the results, particularly if the analysis is fundamental to our understanding of the universe. In this note we discuss the significant biases that can result from data binning schemes. As we will show, if data are binned such that they provide the best comparison to a particular (but incorrect) model, the resulting model parameter estimates when fitting to the binned data can be significantly biased, leading us to too often accept the model hypothesis when it is not in fact true. When using binned likelihood or least squares methods there is of course no a priori requirement that data bin sizes need to be constant, but we show that fitting to data grouped into variable width bins is particularly prone to produce biased results if the bin boundaries are chosen to optimize the comparison of the binned data to a wrong model. The degree of bias that can be achieved simply with variable binning can be surprisingly large. Fitting the data with an unbinned likelihood method, when possible to do so, is the best way for researchers to show that their analyses are not biased by binning effects. Failing that, equal bin widths should be employed as a cross-check of the fitting analysis whenever possible.

  6. Analysing model fit of psychometric process models: An overview, a new test and an application to the diffusion model.

    Science.gov (United States)

    Ranger, Jochen; Kuhn, Jörg-Tobias; Szardenings, Carsten

    2017-05-01

    Cognitive psychometric models embed cognitive process models into a latent trait framework in order to allow for individual differences. Due to their close relationship to the response process the models allow for profound conclusions about the test takers. However, before such a model can be used its fit has to be checked carefully. In this manuscript we give an overview over existing tests of model fit and show their relation to the generalized moment test of Newey (Econometrica, 53, 1985, 1047) and Tauchen (J. Econometrics, 30, 1985, 415). We also present a new test, the Hausman test of misspecification (Hausman, Econometrica, 46, 1978, 1251). The Hausman test consists of a comparison of two estimates of the same item parameters which should be similar if the model holds. The performance of the Hausman test is evaluated in a simulation study. In this study we illustrate its application to two popular models in cognitive psychometrics, the Q-diffusion model and the D-diffusion model (van der Maas, Molenaar, Maris, Kievit, & Boorsboom, Psychol Rev., 118, 2011, 339; Molenaar, Tuerlinckx, & van der Maas, J. Stat. Softw., 66, 2015, 1). We also compare the performance of the test to four alternative tests of model fit, namely the M 2 test (Molenaar et al., J. Stat. Softw., 66, 2015, 1), the moment test (Ranger et al., Br. J. Math. Stat. Psychol., 2016) and the test for binned time (Ranger & Kuhn, Psychol. Test. Asess. , 56, 2014b, 370). The simulation study indicates that the Hausman test is superior to the latter tests. The test closely adheres to the nominal Type I error rate and has higher power in most simulation conditions. © 2017 The British Psychological Society.

  7. Patients’ Acceptance of Smartphone Health Technology for Chronic Disease Management: A Theoretical Model and Empirical Test

    Science.gov (United States)

    Dou, Kaili; Yu, Ping; Liu, Fang; Guan, YingPing; Li, Zhenye; Ji, Yumeng; Du, Ningkai; Lu, Xudong; Duan, Huilong

    2017-01-01

    Background Chronic disease patients often face multiple challenges from difficult comorbidities. Smartphone health technology can be used to help them manage their conditions only if they accept and use the technology. Objective The aim of this study was to develop and test a theoretical model to predict and explain the factors influencing patients’ acceptance of smartphone health technology for chronic disease management. Methods Multiple theories and factors that may influence patients’ acceptance of smartphone health technology have been reviewed. A hybrid theoretical model was built based on the technology acceptance model, dual-factor model, health belief model, and the factors identified from interviews that might influence patients’ acceptance of smartphone health technology for chronic disease management. Data were collected from patient questionnaire surveys and computer log records about 157 hypertensive patients’ actual use of a smartphone health app. The partial least square method was used to test the theoretical model. Results The model accounted for .412 of the variance in patients’ intention to adopt the smartphone health technology. Intention to use accounted for .111 of the variance in actual use and had a significant weak relationship with the latter. Perceived ease of use was affected by patients’ smartphone usage experience, relationship with doctor, and self-efficacy. Although without a significant effect on intention to use, perceived ease of use had a significant positive influence on perceived usefulness. Relationship with doctor and perceived health threat had significant positive effects on perceived usefulness, countering the negative influence of resistance to change. Perceived usefulness, perceived health threat, and resistance to change significantly predicted patients’ intentions to use the technology. Age and gender had no significant influence on patients’ acceptance of smartphone technology. The study also

  8. ICT and OTs: a model of information and communication technology acceptance and utilisation by occupational therapists.

    Science.gov (United States)

    Schaper, Louise K; Pervan, Graham P

    2007-06-01

    There is evidence to suggest that health professionals are reluctant to accept and utilise information and communication technologies (ICT) and concern is growing within health informatics research that this is contributing to the lag in adoption and utilisation of ICT across the health sector. Technology acceptance research within the field of information systems has been limited in its application to health and there is a concurrent need to develop and gain empirical support for models of technology acceptance within health and to examine acceptance and utilisation issues amongst health professionals to improve the success of information system implementation in this arena. This paper outlines a project that examines ICT acceptance and utilisation by Australian occupational therapists. It describes the theoretical basis behind the development of a research model and the methodology being employed to empirically validate the model using substantial quantitative, qualitative and longitudinal data. Preliminary results from Phase II of the study are presented. The theoretical significance of this work is that it uses a thoroughly constructed research model, with potentially the largest sample size ever tested, to extend technology acceptance research into the health sector.

  9. The universal Higgs fit

    DEFF Research Database (Denmark)

    Giardino, P. P.; Kannike, K.; Masina, I.

    2014-01-01

    We perform a state-of-the-art global fit to all Higgs data. We synthesise them into a 'universal' form, which allows to easily test any desired model. We apply the proposed methodology to extract from data the Higgs branching ratios, production cross sections, couplings and to analyse composite...... Higgs models, models with extra Higgs doublets, supersymmetry, extra particles in the loops, anomalous top couplings, and invisible Higgs decays into Dark Matter. Best fit regions lie around the Standard Model predictions and are well approximated by our 'universal' fit. Latest data exclude the dilaton...... as an alternative to the Higgs, and disfavour fits with negative Yukawa couplings. We derive for the first time the SM Higgs boson mass from the measured rates, rather than from the peak positions, obtaining M-h = 124.4 +/- 1.6 GeV....

  10. Kinetic modeling and fitting software for interconnected reaction schemes: VisKin.

    Science.gov (United States)

    Zhang, Xuan; Andrews, Jared N; Pedersen, Steen E

    2007-02-15

    Reaction kinetics for complex, highly interconnected kinetic schemes are modeled using analytical solutions to a system of ordinary differential equations. The algorithm employs standard linear algebra methods that are implemented using MatLab functions in a Visual Basic interface. A graphical user interface for simple entry of reaction schemes facilitates comparison of a variety of reaction schemes. To ensure microscopic balance, graph theory algorithms are used to determine violations of thermodynamic cycle constraints. Analytical solutions based on linear differential equations result in fast comparisons of first order kinetic rates and amplitudes as a function of changing ligand concentrations. For analysis of higher order kinetics, we also implemented a solution using numerical integration. To determine rate constants from experimental data, fitting algorithms that adjust rate constants to fit the model to imported data were implemented using the Levenberg-Marquardt algorithm or using Broyden-Fletcher-Goldfarb-Shanno methods. We have included the ability to carry out global fitting of data sets obtained at varying ligand concentrations. These tools are combined in a single package, which we have dubbed VisKin, to guide and analyze kinetic experiments. The software is available online for use on PCs.

  11. Feature extraction through least squares fit to a simple model

    International Nuclear Information System (INIS)

    Demuth, H.B.

    1976-01-01

    The Oak Ridge National Laboratory (ORNL) presented the Los Alamos Scientific Laboratory (LASL) with 18 radiographs of fuel rod test bundles. The problem is to estimate the thickness of the gap between some cylindrical rods and a flat wall surface. The edges of the gaps are poorly defined due to finite source size, x-ray scatter, parallax, film grain noise, and other degrading effects. The radiographs were scanned and the scan-line data were averaged to reduce noise and to convert the problem to one dimension. A model of the ideal gap, convolved with an appropriate point-spread function, was fit to the averaged data with a least squares program; and the gap width was determined from the final fitted-model parameters. The least squares routine did converge and the gaps obtained are of reasonable size. The method is remarkably insensitive to noise. This report describes the problem, the techniques used to solve it, and the results and conclusions. Suggestions for future work are also given

  12. Capacity Prediction Model Based on Limited Priority Gap-Acceptance Theory at Multilane Roundabouts

    Directory of Open Access Journals (Sweden)

    Zhaowei Qu

    2014-01-01

    Full Text Available Capacity is an important design parameter for roundabouts, and it is the premise of computing their delay and queue. Roundabout capacity has been studied for decades, and empirical regression model and gap-acceptance model are the two main methods to predict it. Based on gap-acceptance theory, by considering the effect of limited priority, especially the relationship between limited priority factor and critical gap, a modified model was built to predict the roundabout capacity. We then compare the results between Raff’s method and maximum likelihood estimation (MLE method, and the MLE method was used to predict the critical gaps. Finally, the predicted capacities from different models were compared, with the observed capacity by field surveys, which verifies the performance of the proposed model.

  13. Assessing item fit for unidimensional item response theory models using residuals from estimated item response functions.

    Science.gov (United States)

    Haberman, Shelby J; Sinharay, Sandip; Chon, Kyong Hee

    2013-07-01

    Residual analysis (e.g. Hambleton & Swaminathan, Item response theory: principles and applications, Kluwer Academic, Boston, 1985; Hambleton, Swaminathan, & Rogers, Fundamentals of item response theory, Sage, Newbury Park, 1991) is a popular method to assess fit of item response theory (IRT) models. We suggest a form of residual analysis that may be applied to assess item fit for unidimensional IRT models. The residual analysis consists of a comparison of the maximum-likelihood estimate of the item characteristic curve with an alternative ratio estimate of the item characteristic curve. The large sample distribution of the residual is proved to be standardized normal when the IRT model fits the data. We compare the performance of our suggested residual to the standardized residual of Hambleton et al. (Fundamentals of item response theory, Sage, Newbury Park, 1991) in a detailed simulation study. We then calculate our suggested residuals using data from an operational test. The residuals appear to be useful in assessing the item fit for unidimensional IRT models.

  14. Acceptance on Mobile Learning via SMS: A Rasch Model Analysis

    Directory of Open Access Journals (Sweden)

    Issham Ismail

    2010-04-01

    Full Text Available This study investigated whether mobile learning via Short Message Service (SMS-learning is accepted by the students enrolled in the distance learning academic programme in the Universiti Sains Malaysia. This study explored the impact of perceived usefulness, perceived ease of use and usability of the system to their acceptability. The survey was constructed using a questionnaire consisting of statements regarding the participants’ demographics, experiences in and perception of using mobile learning via SMS, involving 105 students from management and sciences disciplines. The Rasch Model Analysis was used for measurement correspond to a 5 point Likert. Results indicated that the usability of the system contributed to be effectiveness in assisting the students with their study. Respondents agree that SMS-learning is easy, effective and useful to help them study. However, the results found that there has been a problem in mobile learning that less interaction with lecturers. It implies that the acceptability of students to this mode on communication and interaction is highly endorsed.

  15. Computerized videokeratoscopy contact lens software for RGP fitting in a bilateral postkeratoplasty patient: a clinical case report.

    Science.gov (United States)

    Szczotka, L B; Reinhart, W

    1995-01-01

    Computerized videokeratoscopy systems now allow interactive rigid gas permeable (RGP) fitting evaluation using fluorescein pattern simulations through updated software programs. We used Computed Anatomy's Topographic Modeling System-1 (TMS-1) Custom Design Contact Lens Program successfully to refit a symptomatic bilateral post-penetrating keratoplasty patient. No trial lenses were used. For each eye the base curve, optic zone size, and edge lift were chosen from the optimal fluorescein pattern designed and titrated on the TMS-1 unit. Lens powers were based on the patient's previous lenses and overrefraction. Dispensed lenses provided a clinically acceptable fit, good comfort, and maximal visual acuity, and no adjustments were necessary. Corneal videokeratoscopy can be successfully employed to titrate an RGP fit, even on irregular corneas.

  16. Fitness cost

    DEFF Research Database (Denmark)

    Nielsen, Karen L.; Pedersen, Thomas M.; Udekwu, Klas I.

    2012-01-01

    phage types, predominantly only penicillin resistant. We investigated whether isolates of this epidemic were associated with a fitness cost, and we employed a mathematical model to ask whether these fitness costs could have led to the observed reduction in frequency. Bacteraemia isolates of S. aureus...... from Denmark have been stored since 1957. We chose 40 S. aureus isolates belonging to phage complex 83A, clonal complex 8 based on spa type, ranging in time of isolation from 1957 to 1980 and with varyous antibiograms, including both methicillin-resistant and -susceptible isolates. The relative fitness...... of each isolate was determined in a growth competition assay with a reference isolate. Significant fitness costs of 215 were determined for the MRSA isolates studied. There was a significant negative correlation between number of antibiotic resistances and relative fitness. Multiple regression analysis...

  17. GOODNESS-OF-FIT TEST FOR THE ACCELERATED FAILURE TIME MODEL BASED ON MARTINGALE RESIDUALS

    Czech Academy of Sciences Publication Activity Database

    Novák, Petr

    2013-01-01

    Roč. 49, č. 1 (2013), s. 40-59 ISSN 0023-5954 R&D Projects: GA MŠk(CZ) 1M06047 Grant - others:GA MŠk(CZ) SVV 261315/2011 Keywords : accelerated failure time model * survival analysis * goodness-of-fit Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 0.563, year: 2013 http://library.utia.cas.cz/separaty/2013/SI/novak-goodness-of-fit test for the aft model based on martingale residuals.pdf

  18. Older Adults' Perceptions of and Preferences for a Fall Risk Assessment System: Exploring Stages of Acceptance Model.

    Science.gov (United States)

    Galambos, Colleen; Rantz, Marilyn; Back, Jessie; Jun, Jung Sim; Skubic, Marjorie; Miller, Steven J

    2017-07-01

    Aging in place is a preferred and cost-effective living option for older adults. Research indicates that technology can assist with this goal. Information on consumer preferences will help in technology development to assist older adults to age in place. The study aim was to explore the perceptions and preferences of older adults and their family members about a fall risk assessment system. Using a qualitative approach, this study examined the perceptions, attitudes, and preferences of 13 older adults and five family members about their experience living with the fall risk assessment system during five points in time. Themes emerged in relation to preferences and expectations about the technology and how it fits into daily routines. We were able to capture changes that occurred over time for older adult participants. Results indicated that there was acceptance of the technology as participants adapted to it. Two themes were present across the five points in time-safety and usefulness. Five stages of acceptance emerged from the data from preinstallation to 2 years postinstallation. Identified themes, stages of acceptance, and design and development considerations are discussed.

  19. [An experimental study on the effect of different optical impression methods on marginal and internal fit of all-ceramic crowns].

    Science.gov (United States)

    Tan, Fa-Bing; Wang, Lu; Fu, Gang; Wu, Shu-Hong; Jin, Ping

    2010-02-01

    To study the effect of different optical impression methods in Cerec 3D/Inlab MC XL system on marginal and internal fit of all-ceramic crowns. A right mandibular first molar in the standard model was used to prepare full crown and replicated into thirty-two plaster casts. Sixteen of them were selected randomly for bonding crown and the others were used for taking optical impression, in half of which the direct optical impression taking method were used and the others were used for the indirect method, and then eight Cerec Blocs all-ceramic crowns were manufactured respectively. The fit of all-ceramic crowns were evaluated by modified United States Public Health Service (USPHS) criteria and scanning electron microscope (SEM) imaging, and the data were statistically analyzed with SAS 9.1 software. The clinically acceptable rate for all marginal measurement sites was 87.5% according to USPHS criteria. There was no statistically significant difference in marginal fit between direct and indirect method group (P > 0.05). With SEM imaging, all marginal measurement sites were less than 120 microm and no statistically significant difference was found between direct and indirect method group in terms of marginal or internal fit (P > 0.05). But the direct method group showed better fit than indirect method group in terms of mesial surface, lingual surface, buccal surface and occlusal surface (P impression method had no significant effect on marginal fit of Cerec Blocs crowns, but it had certain effect on internal fit. Overall all-ceramic crowns appeared to have clinically acceptable marginal fit.

  20. Patients' Acceptance of Smartphone Health Technology for Chronic Disease Management: A Theoretical Model and Empirical Test.

    Science.gov (United States)

    Dou, Kaili; Yu, Ping; Deng, Ning; Liu, Fang; Guan, YingPing; Li, Zhenye; Ji, Yumeng; Du, Ningkai; Lu, Xudong; Duan, Huilong

    2017-12-06

    Chronic disease patients often face multiple challenges from difficult comorbidities. Smartphone health technology can be used to help them manage their conditions only if they accept and use the technology. The aim of this study was to develop and test a theoretical model to predict and explain the factors influencing patients' acceptance of smartphone health technology for chronic disease management. Multiple theories and factors that may influence patients' acceptance of smartphone health technology have been reviewed. A hybrid theoretical model was built based on the technology acceptance model, dual-factor model, health belief model, and the factors identified from interviews that might influence patients' acceptance of smartphone health technology for chronic disease management. Data were collected from patient questionnaire surveys and computer log records about 157 hypertensive patients' actual use of a smartphone health app. The partial least square method was used to test the theoretical model. The model accounted for .412 of the variance in patients' intention to adopt the smartphone health technology. Intention to use accounted for .111 of the variance in actual use and had a significant weak relationship with the latter. Perceived ease of use was affected by patients' smartphone usage experience, relationship with doctor, and self-efficacy. Although without a significant effect on intention to use, perceived ease of use had a significant positive influence on perceived usefulness. Relationship with doctor and perceived health threat had significant positive effects on perceived usefulness, countering the negative influence of resistance to change. Perceived usefulness, perceived health threat, and resistance to change significantly predicted patients' intentions to use the technology. Age and gender had no significant influence on patients' acceptance of smartphone technology. The study also confirmed the positive relationship between intention to use

  1. Assessing model fit in latent class analysis when asymptotics do not hold

    NARCIS (Netherlands)

    van Kollenburg, Geert H.; Mulder, Joris; Vermunt, Jeroen K.

    2015-01-01

    The application of latent class (LC) analysis involves evaluating the LC model using goodness-of-fit statistics. To assess the misfit of a specified model, say with the Pearson chi-squared statistic, a p-value can be obtained using an asymptotic reference distribution. However, asymptotic p-values

  2. Understanding consumers’ acceptance of mobile payments : a theoretical model and empirical validation

    OpenAIRE

    Chen, Jiajun

    2007-01-01

    This research investigates consumer acceptance of mobile payments. Mobile payments offer an alternative payment method for consumers, and allow consumers to make point-of-sales payments through mobile devices, such as mobile phones and Personal Digital Assistants (PDAs). It aims to present a better understanding of mobile payments, developing a consumer acceptance model for mobile payments. Moreover, it offers a reference and a source of literature for the industry and academic researchers in...

  3. Development of fitting methods using geometric progression formulae of gamma-ray buildup factors

    International Nuclear Information System (INIS)

    Yoshida, Yoshitaka

    2006-01-01

    The gamma ray buildup factors are represented by an approximation method to speed up calculation using the point attenuation kernel method. The fitting parameters obtained by the GP formula and Taylor's formula are compiled in ANSI/ANS 6.4.3, available without any limitation. The GP formula featured high accuracy but required a high-level fitting technique. Thus the GP formula was divided into a curved line and a part representing the base values and used to develop the a fitting method and X k fitting method. As a result, this methodology showed that (1) when the fitting ranges were identical, there was no change in standard deviation when the unit penetration depth was varied; (2) even with fitting up to 300 mfp, the average standard deviation of 26 materials was 2.9% and acceptable GP parameters were extracted; (3) when the same end points of the fitting were selected and the starting points of fitting were identical with the unit penetration depth, the deviation became smaller with increasing unit penetration depth; and (4) even with the deviation adjusted to the positive side from 0.5 mfp to 300 mfp, the average standard deviation of 26 materials was 5.6%, which was an acceptable value. However, the GP parameters obtained by this methodology cannot be used for direct interpolation using gamma ray energy or materials. (author)

  4. Military fitness of young South African adults: Does it comply with ...

    African Journals Online (AJOL)

    The fitness of today's young people is reported to be at a very low level, and this is disconcerting considering that some are needed as military recruits but will not be accepted if they do not pass the military fitness tests. The aims of this study were to investigate the pass rate of young adults (n=41) in the standard South ...

  5. The effect of measurement quality on targeted structural model fit indices: A comment on Lance, Beck, Fan, and Carter (2016).

    Science.gov (United States)

    McNeish, Daniel; Hancock, Gregory R

    2018-03-01

    Lance, Beck, Fan, and Carter (2016) recently advanced 6 new fit indices and associated cutoff values for assessing data-model fit in the structural portion of traditional latent variable path models. The authors appropriately argued that, although most researchers' theoretical interest rests with the latent structure, they still rely on indices of global model fit that simultaneously assess both the measurement and structural portions of the model. As such, Lance et al. proposed indices intended to assess the structural portion of the model in isolation of the measurement model. Unfortunately, although these strategies separate the assessment of the structure from the fit of the measurement model, they do not isolate the structure's assessment from the quality of the measurement model. That is, even with a perfectly fitting measurement model, poorer quality (i.e., less reliable) measurements will yield a more favorable verdict regarding structural fit, whereas better quality (i.e., more reliable) measurements will yield a less favorable structural assessment. This phenomenon, referred to by Hancock and Mueller (2011) as the reliability paradox, affects not only traditional global fit indices but also those structural indices proposed by Lance et al. as well. Fortunately, as this comment will clarify, indices proposed by Hancock and Mueller help to mitigate this problem and allow the structural portion of the model to be assessed independently of both the fit of the measurement model as well as the quality of indicator variables contained therein. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  6. Public Participation and Institutional Fit: A Social-Psychological Perspective

    Directory of Open Access Journals (Sweden)

    Daniel A. DeCaro

    2013-12-01

    Full Text Available Public participation plays a role in the development and long-term maintenance of environmental institutions that are well-matched to local social-ecological conditions. However, the means by which public participation impacts such institutional fit remains unclear. We argue that one major reason for this lack of clarity is that analysts have not clearly outlined how humankind's sense of agency, or self-determination, influences institutional outcomes. Moreover, the concept of institutional fit is ambiguous as to what constitutes a good fit and how such fit could be diagnosed or improved. This is especially true for "social fit," or how well institutions match human expectations and local behavioral patterns. We develop an interdisciplinary framework based on principles of human agency and institutional analysis from social psychology to address these problems. Using the concept of "institutional acceptance" as an indicator of social fit, we show how analysts can define, diagnose, and improve social fit of participatory programs. We also show how such fit emerges and is sustained over time. This interdisciplinary perspective on fit and participation has important implications for participatory approaches to environmental management and the scientific study of institutional evolution.

  7. Adding Innovation Diffusion Theory to the Technology Acceptance Model: Supporting Employees' Intentions to Use E-Learning Systems

    Science.gov (United States)

    Lee, Yi-Hsuan; Hsieh, Yi-Chuan; Hsu, Chia-Ning

    2011-01-01

    This study intends to investigate factors affecting business employees' behavioral intentions to use the e-learning system. Combining the innovation diffusion theory (IDT) with the technology acceptance model (TAM), the present study proposes an extended technology acceptance model. The proposed model was tested with data collected from 552…

  8. FitSKIRT: genetic algorithms to automatically fit dusty galaxies with a Monte Carlo radiative transfer code

    Science.gov (United States)

    De Geyter, G.; Baes, M.; Fritz, J.; Camps, P.

    2013-02-01

    We present FitSKIRT, a method to efficiently fit radiative transfer models to UV/optical images of dusty galaxies. These images have the advantage that they have better spatial resolution compared to FIR/submm data. FitSKIRT uses the GAlib genetic algorithm library to optimize the output of the SKIRT Monte Carlo radiative transfer code. Genetic algorithms prove to be a valuable tool in handling the multi- dimensional search space as well as the noise induced by the random nature of the Monte Carlo radiative transfer code. FitSKIRT is tested on artificial images of a simulated edge-on spiral galaxy, where we gradually increase the number of fitted parameters. We find that we can recover all model parameters, even if all 11 model parameters are left unconstrained. Finally, we apply the FitSKIRT code to a V-band image of the edge-on spiral galaxy NGC 4013. This galaxy has been modeled previously by other authors using different combinations of radiative transfer codes and optimization methods. Given the different models and techniques and the complexity and degeneracies in the parameter space, we find reasonable agreement between the different models. We conclude that the FitSKIRT method allows comparison between different models and geometries in a quantitative manner and minimizes the need of human intervention and biasing. The high level of automation makes it an ideal tool to use on larger sets of observed data.

  9. A scaled Lagrangian method for performing a least squares fit of a model to plant data

    International Nuclear Information System (INIS)

    Crisp, K.E.

    1988-01-01

    Due to measurement errors, even a perfect mathematical model will not be able to match all the corresponding plant measurements simultaneously. A further discrepancy may be introduced if an un-modelled change in conditions occurs within the plant which should have required a corresponding change in model parameters - e.g. a gradual deterioration in the performance of some component(s). Taking both these factors into account, what is required is that the overall discrepancy between the model predictions and the plant data is kept to a minimum. This process is known as 'model fitting', A method is presented for minimising any function which consists of the sum of squared terms, subject to any constraints. Its most obvious application is in the process of model fitting, where a weighted sum of squares of the differences between model predictions and plant data is the function to be minimised. When implemented within existing Central Electricity Generating Board computer models, it will perform a least squares fit of a model to plant data within a single job submission. (author)

  10. Feasibility, safety, acceptability, and functional outcomes of playing Nintendo Wii Fit Plus™ for frail elderly: study protocol for a feasibility trial.

    Science.gov (United States)

    Gomes, Gisele Cristine Vieira; Bacha, Jéssica Maria Ribeiro; do Socorro Simões, Maria; Lin, Sumika Mori; Viveiro, Larissa Alamino Pereira; Varise, Eliana Maria; Filho, Wilson Jacob; Pompeu, José Eduardo

    2017-01-01

    Frailty can be defined as a medical syndrome with multiple causes and contributors, characterized by diminished strength and endurance and reduced physiological function that increases the vulnerability to develop functional dependency and/or death. Studies have shown that the most commonly studied exercise protocol for frail older adults is the multimodal training. Interactive video games (IVGs) involve tasks in virtual environments that combine physical and cognitive demands in an attractive and challenging way. The aim of this study will be to evaluate the feasibility, safety, acceptability, and functional outcomes of playing Nintendo Wii Fit Plus TM (NWFP) for frail older adults. The study is a randomized controlled, parallel group, feasibility trial. Participants will be randomly assigned to the experimental group (EG) and control group (CG). The EG will participate in 14 training sessions, each lasting 50 min, twice a week. In each training session, the participants will play five games, with three attempts at each game. The first attempt will be performed with the assistance of a physical therapist to correct the movements and posture of the patients and subsequent attempts will be performed independently. Scores achieved in the games will be recorded. The participants will be evaluated by a blinded physical therapist at three moments: before and after intervention and 30 days after the end of the intervention (follow-up). We will assess the feasibility, acceptability, safety, and clinical outcomes (postural control, gait, cognition, quality of life, mood, and fear of falling). Due to the deficiencies in multiple systems, studies have shown that multimodal interventions including motor-cognitive stimulation can improve the mobility of frail elderly adults. IVGs, among them the NWFP, are considered as a multimodal motor-cognitive intervention that can potentially improve motor and cognitive functions in the frail elderly. However, there is still no evidence

  11. An Investigation of Employees' Use of E-Learning Systems: Applying the Technology Acceptance Model

    Science.gov (United States)

    Lee, Yi-Hsuan; Hsieh, Yi-Chuan; Chen, Yen-Hsun

    2013-01-01

    The purpose of this study is to apply the technology acceptance model to examine the employees' attitudes and acceptance of electronic learning (e-learning) systems in organisations. This study examines four factors (organisational support, computer self-efficacy, prior experience and task equivocality) that are believed to influence employees'…

  12. The disconnected values model improves mental well-being and fitness in an employee wellness program.

    Science.gov (United States)

    Anshel, Mark H; Brinthaupt, Thomas M; Kang, Minsoo

    2010-01-01

    This study examined the effect of a 10-week wellness program on changes in physical fitness and mental well-being. The conceptual framework for this study was the Disconnected Values Model (DVM). According to the DVM, detecting the inconsistencies between negative habits and values (e.g., health, family, faith, character) and concluding that these "disconnects" are unacceptable promotes the need for health behavior change. Participants were 164 full-time employees at a university in the southeastern U.S. The program included fitness coaching and a 90-minute orientation based on the DVM. Multivariate Mixed Model analyses indicated significantly improved scores from pre- to post-intervention on selected measures of physical fitness and mental well-being. The results suggest that the Disconnected Values Model provides an effective cognitive-behavioral approach to generating health behavior change in a 10-week workplace wellness program.

  13. AXAF FITS standard for ray trace interchange

    Science.gov (United States)

    Hsieh, Paul F.

    1993-07-01

    A standard data format for the archival and transport of x-ray events generated by ray trace models is described. Upon review and acceptance by the Advanced X-ray Astrophysics Facility (AXAF) Software Systems Working Group (SSWG), this standard shall become the official AXAF data format for ray trace events. The Flexible Image Transport System (FITS) is well suited for the purposes of the standard and was selected to be the basis of the standard. FITS is both flexible and efficient and is also widely used within the astronomical community for storage and transfer of data. In addition, software to read and write FITS format files are widely available. In selecting quantities to be included within the ray trace standard, the AXAF Mission Support team, Science Instruments team, and the other contractor teams were surveyed. From the results of this survey, the following requirements were established: (1) for the scientific needs, each photon should have associated with it: position, direction, energy, and statistical weight; the standard must also accommodate path length (relative phase), and polarization. (2) a unique photon identifier is necessary for bookkeeping purposes; (3) a log of individuals, organizations, and software packages that have modified the data must be maintained in order to create an audit trail; (4) a mechanism for extensions to the basic kernel should be provided; and (5) the ray trace standard should integrate with future AXAF data product standards.

  14. Model of acceptance of a new type of beverage: application to natural sparkling red wine

    OpenAIRE

    Cristina Olarte; Jorge Pelegrín; Eva Reinares

    2017-01-01

    Wine is a traditional beverage with a saturated market, in which consumers are open to innovation. In this context, an innovative experience was launched to create a new natural sparkling red wine with a view to diversifying production and studying its acceptance. This paper uses an original acceptance model for new foods called the Cognitive-Affective-Normative (CAN) model. The model was tested on a sample of 500 Spanish consumers in a real-world test context and explains 64.1% of the intent...

  15. GOSSIP: SED fitting code

    Science.gov (United States)

    Franzetti, Paolo; Scodeggio, Marco

    2012-10-01

    GOSSIP fits the electro-magnetic emission of an object (the SED, Spectral Energy Distribution) against synthetic models to find the simulated one that best reproduces the observed data. It builds-up the observed SED of an object (or a large sample of objects) combining magnitudes in different bands and eventually a spectrum; then it performs a chi-square minimization fitting procedure versus a set of synthetic models. The fitting results are used to estimate a number of physical parameters like the Star Formation History, absolute magnitudes, stellar mass and their Probability Distribution Functions.

  16. Field data-based mathematical modeling by Bode equations and vector fitting algorithm for renewable energy applications

    Science.gov (United States)

    W. Hasan, W. Z.

    2018-01-01

    The power system always has several variations in its profile due to random load changes or environmental effects such as device switching effects when generating further transients. Thus, an accurate mathematical model is important because most system parameters vary with time. Curve modeling of power generation is a significant tool for evaluating system performance, monitoring and forecasting. Several numerical techniques compete to fit the curves of empirical data such as wind, solar, and demand power rates. This paper proposes a new modified methodology presented as a parametric technique to determine the system’s modeling equations based on the Bode plot equations and the vector fitting (VF) algorithm by fitting the experimental data points. The modification is derived from the familiar VF algorithm as a robust numerical method. This development increases the application range of the VF algorithm for modeling not only in the frequency domain but also for all power curves. Four case studies are addressed and compared with several common methods. From the minimal RMSE, the results show clear improvements in data fitting over other methods. The most powerful features of this method is the ability to model irregular or randomly shaped data and to be applied to any algorithms that estimating models using frequency-domain data to provide state-space or transfer function for the model. PMID:29351554

  17. Field data-based mathematical modeling by Bode equations and vector fitting algorithm for renewable energy applications.

    Science.gov (United States)

    Sabry, A H; W Hasan, W Z; Ab Kadir, M Z A; Radzi, M A M; Shafie, S

    2018-01-01

    The power system always has several variations in its profile due to random load changes or environmental effects such as device switching effects when generating further transients. Thus, an accurate mathematical model is important because most system parameters vary with time. Curve modeling of power generation is a significant tool for evaluating system performance, monitoring and forecasting. Several numerical techniques compete to fit the curves of empirical data such as wind, solar, and demand power rates. This paper proposes a new modified methodology presented as a parametric technique to determine the system's modeling equations based on the Bode plot equations and the vector fitting (VF) algorithm by fitting the experimental data points. The modification is derived from the familiar VF algorithm as a robust numerical method. This development increases the application range of the VF algorithm for modeling not only in the frequency domain but also for all power curves. Four case studies are addressed and compared with several common methods. From the minimal RMSE, the results show clear improvements in data fitting over other methods. The most powerful features of this method is the ability to model irregular or randomly shaped data and to be applied to any algorithms that estimating models using frequency-domain data to provide state-space or transfer function for the model.

  18. Field data-based mathematical modeling by Bode equations and vector fitting algorithm for renewable energy applications.

    Directory of Open Access Journals (Sweden)

    A H Sabry

    Full Text Available The power system always has several variations in its profile due to random load changes or environmental effects such as device switching effects when generating further transients. Thus, an accurate mathematical model is important because most system parameters vary with time. Curve modeling of power generation is a significant tool for evaluating system performance, monitoring and forecasting. Several numerical techniques compete to fit the curves of empirical data such as wind, solar, and demand power rates. This paper proposes a new modified methodology presented as a parametric technique to determine the system's modeling equations based on the Bode plot equations and the vector fitting (VF algorithm by fitting the experimental data points. The modification is derived from the familiar VF algorithm as a robust numerical method. This development increases the application range of the VF algorithm for modeling not only in the frequency domain but also for all power curves. Four case studies are addressed and compared with several common methods. From the minimal RMSE, the results show clear improvements in data fitting over other methods. The most powerful features of this method is the ability to model irregular or randomly shaped data and to be applied to any algorithms that estimating models using frequency-domain data to provide state-space or transfer function for the model.

  19. MOUNTABILITY PARTS OF MACHINE WITH ROTATING SURFACE, FITTED WITH POSITIVE CLEARANCE

    Directory of Open Access Journals (Sweden)

    Zbigniew BUDNIAK

    2014-06-01

    Full Text Available In this paper demonstrates the conditions of automatic assembly the parts of machines with rotating surfaces, fitted with positive clearance. Determination of the general condition of asseblability allowed for designation of the acceptable relative displacement and torsion axle, combined parts on the mounting position. The designation of depending allowed for assess the technological capacity of the installation equipment. On the basis of this mathematical model was developed a computer program that allows to determine the effect of geometric, strength and dynamic parameters of the assembly process. The examples of results of numerical calculations are shown in the graphs

  20. Barcode Technology Acceptance and Utilization in Health Information Management Department at Academic Hospitals According to Technology Acceptance Model.

    Science.gov (United States)

    Ehteshami, Asghar

    2017-03-01

    Nowdays, due to the increasing importance of quality care, organizations focuse on the improving provision, management and distribution of health. On one hand, incremental costs of the new technologies and on the other hand, increased knowledge of health care recipients and their expectations for high quality services have doubled the need to make changes in order to respond to resource constraints (financial, human, material). For this purpose, several technologies, such as barcode, have been used in hospitals to improve services and staff productivity; but various factors effect on the adoption of new technologies and despite good implementation of a technology and its benefits, sometimes personnel don't accept and don't use it. This is an applied descriptive cross-sectional study in which all the barcode users in health information management department of the three academic hospitals (Feiz, Al-Zahra, Ayatollah Kashani) affiliated to Isfahan University of Medical Sciences were surveyed by the barcode technology acceptance questionnaire, in six areas as following: barcode ease of learning, capabilities, perception of its usefulness and its ease of use, users attitudes towards its using, and users intention. The finding showed that barcode technology total acceptance was relatively desirable (%76.9); the most compliance with TAM model was related to the user perceptions about the ease of use of barcode technology and the least compliance was related to the ease of learning barcode technology (respectively %83.7 and %71.5). Ease of learning and barcode capability effect of usefulness and perceived ease of barcode technology. Users perceptions effect their attitudes toward greater use of technology and their attitudes have an effect on their intention to use the technology and finally, their intention makes actual use of the technology (acceptance). Therefore, considering the six elements related to technology implementation can be important in the barcode

  1. Nature preservation acceptance model applied to tanker oil spill simulations

    DEFF Research Database (Denmark)

    Friis-Hansen, Peter; Ditlevsen, Ove Dalager

    2003-01-01

    is exemplified by a study of oil spills due to simulated tanker collisions in the Danish straits. It is found that the distribution of the oil spill volume per spill is well represented by an exponential distribution both in Oeresund and in Great Belt. When applied in the Poisson model, a risk profile reasonably...... acceptance criterion for the pollution of the environment. This NPWI acceptance criterion is applied to the oil spill example....... be defined in a similar way as the so-called Life Quality Index defined by Nathwani et al [Nathwani JS, Lind NC, Padey MD. Affordable safety by choice: the life quality method. Institute for Risk Research, University of Waterloo; Waterloo (Ontario, Canada):1997], and can be used to quantify the risk...

  2. Nurses' perceptions, acceptance, and use of a novel in-room pediatric ICU technology: testing an expanded technology acceptance model.

    Science.gov (United States)

    Holden, Richard J; Asan, Onur; Wozniak, Erica M; Flynn, Kathryn E; Scanlon, Matthew C

    2016-11-15

    The value of health information technology (IT) ultimately depends on end users accepting and appropriately using it for patient care. This study examined pediatric intensive care unit nurses' perceptions, acceptance, and use of a novel health IT, the Large Customizable Interactive Monitor. An expanded technology acceptance model was tested by applying stepwise linear regression to data from a standardized survey of 167 nurses. Nurses reported low-moderate ratings of the novel IT's ease of use and low to very low ratings of usefulness, social influence, and training. Perceived ease of use, usefulness for patient/family involvement, and usefulness for care delivery were associated with system satisfaction (R 2  = 70%). Perceived usefulness for care delivery and patient/family social influence were associated with intention to use the system (R 2  = 65%). Satisfaction and intention were associated with actual system use (R 2  = 51%). The findings have implications for research, design, implementation, and policies for nursing informatics, particularly novel nursing IT. Several changes are recommended to improve the design and implementation of the studied IT.

  3. Usability and Acceptability of Balance Exergames in Older Adults

    DEFF Research Database (Denmark)

    Nawaz, Ather; Skjæret, Nina; Lægdheim Helbostad, Jorunn

    2016-01-01

    Serious games (exergames) have the potential to be effective for postural balance and increasing muscle strength. Several games have been developed to increase physical fitness and balance among older adults. However, it is unclear to which degree usability and acceptability of exergames for olde...

  4. Sample Size and Statistical Conclusions from Tests of Fit to the Rasch Model According to the Rasch Unidimensional Measurement Model (Rumm) Program in Health Outcome Measurement.

    Science.gov (United States)

    Hagell, Peter; Westergren, Albert

    Sample size is a major factor in statistical null hypothesis testing, which is the basis for many approaches to testing Rasch model fit. Few sample size recommendations for testing fit to the Rasch model concern the Rasch Unidimensional Measurement Models (RUMM) software, which features chi-square and ANOVA/F-ratio based fit statistics, including Bonferroni and algebraic sample size adjustments. This paper explores the occurrence of Type I errors with RUMM fit statistics, and the effects of algebraic sample size adjustments. Data with simulated Rasch model fitting 25-item dichotomous scales and sample sizes ranging from N = 50 to N = 2500 were analysed with and without algebraically adjusted sample sizes. Results suggest the occurrence of Type I errors with N less then or equal to 500, and that Bonferroni correction as well as downward algebraic sample size adjustment are useful to avoid such errors, whereas upward adjustment of smaller samples falsely signal misfit. Our observations suggest that sample sizes around N = 250 to N = 500 may provide a good balance for the statistical interpretation of the RUMM fit statistics studied here with respect to Type I errors and under the assumption of Rasch model fit within the examined frame of reference (i.e., about 25 item parameters well targeted to the sample).

  5. The bystander effect model of Brenner and Sachs fitted to lung cancer data in 11 cohorts of underground miners, and equivalence of fit of a linear relative risk model with adjustment for attained age and age at exposure

    International Nuclear Information System (INIS)

    Little, M P

    2004-01-01

    Bystander effects following exposure to α-particles have been observed in many experimental systems, and imply that linearly extrapolating low dose risks from high dose data might materially underestimate risk. Brenner and Sachs (2002 Int. J. Radiat. Biol. 78 593-604; 2003 Health Phys. 85 103-8) have recently proposed a model of the bystander effect which they use to explain the inverse dose rate effect observed for lung cancer in underground miners exposed to radon daughters. In this paper we fit the model of the bystander effect proposed by Brenner and Sachs to 11 cohorts of underground miners, taking account of the covariance structure of the data and the period of latency between the development of the first pre-malignant cell and clinically overt cancer. We also fitted a simple linear relative risk model, with adjustment for age at exposure and attained age. The methods that we use for fitting both models are different from those used by Brenner and Sachs, in particular taking account of the covariance structure, which they did not, and omitting certain unjustifiable adjustments to the miner data. The fit of the original model of Brenner and Sachs (with 0 y period of latency) is generally poor, although it is much improved by assuming a 5 or 6 y period of latency from the first appearance of a pre-malignant cell to cancer. The fit of this latter model is equivalent to that of a linear relative risk model with adjustment for age at exposure and attained age. In particular, both models are capable of describing the observed inverse dose rate effect in this data set

  6. Fitting measurement models to vocational interest data: are dominance models ideal?

    Science.gov (United States)

    Tay, Louis; Drasgow, Fritz; Rounds, James; Williams, Bruce A

    2009-09-01

    In this study, the authors examined the item response process underlying 3 vocational interest inventories: the Occupational Preference Inventory (C.-P. Deng, P. I. Armstrong, & J. Rounds, 2007), the Interest Profiler (J. Rounds, T. Smith, L. Hubert, P. Lewis, & D. Rivkin, 1999; J. Rounds, C. M. Walker, et al., 1999), and the Interest Finder (J. E. Wall & H. E. Baker, 1997; J. E. Wall, L. L. Wise, & H. E. Baker, 1996). Item response theory (IRT) dominance models, such as the 2-parameter and 3-parameter logistic models, assume that item response functions (IRFs) are monotonically increasing as the latent trait increases. In contrast, IRT ideal point models, such as the generalized graded unfolding model, have IRFs that peak where the latent trait matches the item. Ideal point models are expected to fit better because vocational interest inventories ask about typical behavior, as opposed to requiring maximal performance. Results show that across all 3 interest inventories, the ideal point model provided better descriptions of the response process. The importance of specifying the correct item response model for precise measurement is discussed. In particular, scores computed by a dominance model were shown to be sometimes illogical: individuals endorsing mostly realistic or mostly social items were given similar scores, whereas scores based on an ideal point model were sensitive to which type of items respondents endorsed.

  7. Fitted HBT radii versus space-time variances in flow-dominated models

    International Nuclear Information System (INIS)

    Lisa, Mike; Frodermann, Evan; Heinz, Ulrich

    2007-01-01

    The inability of otherwise successful dynamical models to reproduce the 'HBT radii' extracted from two-particle correlations measured at the Relativistic Heavy Ion Collider (RHIC) is known as the 'RHIC HBT Puzzle'. Most comparisons between models and experiment exploit the fact that for Gaussian sources the HBT radii agree with certain combinations of the space-time widths of the source which can be directly computed from the emission function, without having to evaluate, at significant expense, the two-particle correlation function. We here study the validity of this approach for realistic emission function models some of which exhibit significant deviations from simple Gaussian behaviour. By Fourier transforming the emission function we compute the 2-particle correlation function and fit it with a Gaussian to partially mimic the procedure used for measured correlation functions. We describe a novel algorithm to perform this Gaussian fit analytically. We find that for realistic hydrodynamic models the HBT radii extracted from this procedure agree better with the data than the values previously extracted from the space-time widths of the emission function. Although serious discrepancies between the calculated and measured HBT radii remain, we show that a more 'apples-to-apples' comparison of models with data can play an important role in any eventually successful theoretical description of RHIC HBT data. (author)

  8. The Swedish version of the Acceptance of Chronic Health Conditions Scale for people with multiple sclerosis: Translation, cultural adaptation and psychometric properties.

    Science.gov (United States)

    Forslin, Mia; Kottorp, Anders; Kierkegaard, Marie; Johansson, Sverker

    2016-11-11

    To translate and culturally adapt the Acceptance of Chronic Health Conditions (ACHC) Scale for people with multiple sclerosis into Swedish, and to analyse the psychometric properties of the Swedish version. Ten people with multiple sclerosis participated in translation and cultural adaptation of the ACHC Scale; 148 people with multiple sclerosis were included in evaluation of the psychometric properties of the scale. Translation and cultural adaptation were carried out through translation and back-translation, by expert committee evaluation and pre-test with cognitive interviews in people with multiple sclerosis. The psychometric properties of the Swedish version were evaluated using Rasch analysis. The Swedish version of the ACHC Scale was an acceptable equivalent to the original version. Seven of the original 10 items fitted the Rasch model and demonstrated ability to separate between groups. A 5-item version, including 2 items and 3 super-items, demonstrated better psychometric properties, but lower ability to separate between groups. The Swedish version of the ACHC Scale with the original 10 items did not fit the Rasch model. Two solutions, either with 7 items (ACHC-7) or with 2 items and 3 super-items (ACHC-5), demonstrated acceptable psychometric properties. Use of the ACHC-5 Scale with super-items is recommended, since this solution adjusts for local dependency among items.

  9. When accepting a gift can be professional misconduct and theft.

    Science.gov (United States)

    Griffith, Richard

    2016-07-01

    Gifts are often given as tokens of gratitude by grateful patients to district nurses. However, there are circumstances where the Nursing and Midwifery Council (NMC), as the professional regulator, and the courts, have held that accepting gifts, large or small, from vulnerable adults is dishonest and amounts to professional misconduct and even theft. Richard Griffith discusses the circumstances where a district nurse who accepts a gift can face a fitness-to-practise investigation and an allegation of theft.

  10. A cautionary note on the use of information fit indexes in covariance structure modeling with means

    NARCIS (Netherlands)

    Wicherts, J.M.; Dolan, C.V.

    2004-01-01

    Information fit indexes such as Akaike Information Criterion, Consistent Akaike Information Criterion, Bayesian Information Criterion, and the expected cross validation index can be valuable in assessing the relative fit of structural equation models that differ regarding restrictiveness. In cases

  11. An Analysis of Technology Acceptance in Turkey using Fuzzy Logic and Structural Equation Modelling

    Directory of Open Access Journals (Sweden)

    Bilgin Şenel

    2011-12-01

    Full Text Available Technology is in a constant progress in the way of satisfying increasing human needs. This fact will hold true for the years to come. However, the level of adaptation to technological advancements varies greatly across countries. The pace of adjustment is directly proportional to the importance attached to and the funds allocated for this purpose. Despite the abundance of technological investments in Turkey in recent years, there are only a few studies analyzing the current level of individual interest in technology. This study therefore aims to determine the technology acceptance of Turkish people by using the Technology Acceptance Model (TAM developed by Davis (1989 and to demonstrate the reasons to accept or not accept technology departing from the links between dimensions. While accomplishing this aim, Structural Equation Model (SEM that is a highly strong multivariable analysis technique that makes possible the evaluation of latent structures like psychosocial needs, and the Fuzzy Logic Theorem that provides strong and significant instruments for the measurement of ambiguities and provides the opportunity to meaningfully represent ambiguous concepts expressed in the natural language were used. According to the findings of this study, it was determined that the perceived ease of use is more influential in people’s acceptance of technology than the perceived usefulness is. It was also found that technology acceptance does not differ significantly at the statistical significance level of 0.05 with respect to the participants’ demographic characteristics (age, gender, education level, hometown etc.. In addition, analyses performed to define the relationships between the dimensions of the TAM yielded results that highly supported the TAM. In other words, the dimensions affect technology acceptance to positive and significant degrees

  12. Assessing performance of Bayesian state-space models fit to Argos satellite telemetry locations processed with Kalman filtering.

    Directory of Open Access Journals (Sweden)

    Mónica A Silva

    Full Text Available Argos recently implemented a new algorithm to calculate locations of satellite-tracked animals that uses a Kalman filter (KF. The KF algorithm is reported to increase the number and accuracy of estimated positions over the traditional Least Squares (LS algorithm, with potential advantages to the application of state-space methods to model animal movement data. We tested the performance of two Bayesian state-space models (SSMs fitted to satellite tracking data processed with KF algorithm. Tracks from 7 harbour seals (Phoca vitulina tagged with ARGOS satellite transmitters equipped with Fastloc GPS loggers were used to calculate the error of locations estimated from SSMs fitted to KF and LS data, by comparing those to "true" GPS locations. Data on 6 fin whales (Balaenoptera physalus were used to investigate consistency in movement parameters, location and behavioural states estimated by switching state-space models (SSSM fitted to data derived from KF and LS methods. The model fit to KF locations improved the accuracy of seal trips by 27% over the LS model. 82% of locations predicted from the KF model and 73% of locations from the LS model were <5 km from the corresponding interpolated GPS position. Uncertainty in KF model estimates (5.6 ± 5.6 km was nearly half that of LS estimates (11.6 ± 8.4 km. Accuracy of KF and LS modelled locations was sensitive to precision but not to observation frequency or temporal resolution of raw Argos data. On average, 88% of whale locations estimated by KF models fell within the 95% probability ellipse of paired locations from LS models. Precision of KF locations for whales was generally higher. Whales' behavioural mode inferred by KF models matched the classification from LS models in 94% of the cases. State-space models fit to KF data can improve spatial accuracy of location estimates over LS models and produce equally reliable behavioural estimates.

  13. 76 FR 49751 - Perfect Fitness, Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2011-08-11

    ..., containing a civil penalty of $425,000.00. DATES: Any interested person may ask the Commission not to accept... the laws of the State of California, with its principal corporate office located at 1750 Bridgeway... could create a substantial product hazard, or created an unreasonable risk of serious injury or death...

  14. South African physicians’ acceptance of e-prescribing technology: an empirical test of a modified UTAUT model

    Directory of Open Access Journals (Sweden)

    Jason Cohen

    2013-07-01

    Full Text Available E-prescribing systems hold promise for improving the quality and efficiency of the scripting process. Yet, the use of the technology has been associated with a number of challenges. The diffusion of e-prescribing into physician practices and the consequent realisation of its potential benefits will depend on whether physicians are willing to accept and engage with the technology. This study draws on the Unified Theory of Acceptance and Use of Technology (UTAUT and recent literature on user trust in technology to develop and test a model of the factors influencing South African physicians’ acceptance of e-prescribing. Data was collected from a sample of 72 physicians. Results indicate a general acceptance of e-prescribing amongst physicians who on average reported strong intentions to use e-prescribing technologies if given the opportunity. PLS analysis revealed that physicians’ performance expectancies and perceptions of facilitating conditions had significant direct effects on acceptance whilst trust and effort expectancy had important indirect effects. Social influence and price value perceptions did not add additional explanatory power. The model explained 63% of the variation in physician acceptance.

  15. An Improved Cognitive Model of the Iowa and Soochow Gambling Tasks With Regard to Model Fitting Performance and Tests of Parameter Consistency

    Directory of Open Access Journals (Sweden)

    Junyi eDai

    2015-03-01

    Full Text Available The Iowa Gambling Task (IGT and the Soochow Gambling Task (SGT are two experience-based risky decision-making tasks for examining decision-making deficits in clinical populations. Several cognitive models, including the expectancy-valence learning model (EVL and the prospect valence learning model (PVL, have been developed to disentangle the motivational, cognitive, and response processes underlying the explicit choices in these tasks. The purpose of the current study was to develop an improved model that can fit empirical data better than the EVL and PVL models and, in addition, produce more consistent parameter estimates across the IGT and SGT. Twenty-six opiate users (mean age 34.23; SD 8.79 and 27 control participants (mean age 35; SD 10.44 completed both tasks. Eighteen cognitive models varying in evaluation, updating, and choice rules were fit to individual data and their performances were compared to that of a statistical baseline model to find a best fitting model. The results showed that the model combining the prospect utility function treating gains and losses separately, the decay-reinforcement updating rule, and the trial-independent choice rule performed the best in both tasks. Furthermore, the winning model produced more consistent individual parameter estimates across the two tasks than any of the other models.

  16. The relationship between motor competence, physical fitness and self-perception in children.

    Science.gov (United States)

    Vedul-Kjelsås, V; Sigmundsson, H; Stensdotter, A-K; Haga, M

    2012-05-01

    The aim of the current research was to explore the relationship between motor competence, physical fitness and self-perception, and to study to which extent this relationship may vary by gender. A sample of 67 children (mean age 11.46 years, SD 0.27) completed Harter's Self-Perception Profile for Children (SPPC), the Movement Assessment Battery for Children (MABC) and the Test of Physical Fitness (TPF) to assess self-perception, motor competence and physical fitness. The SPPC was stronger related to total score on TPF than to total score on MABC. However, when looking at boys and girls separately, this result was found for the boys only. In the group in general, total scores on both TPF and MABC correlated significantly with three of the domains of SPPC (social acceptance, athletic competence and physical appearance) and general self-worth. This relationship varied by gender. Interestingly, TPF was highest correlated with perception of athletic competence in boys but with perception of social acceptance in girls. A high and significant correlation was found between physical fitness and motor competence for both genders. The results indicated a strong relationship between physical fitness, motor competence and self-perception in children that varied by gender. This implies that all these factors are essential contributions in order to facilitate participation in physical activity in children. © 2011 Blackwell Publishing Ltd.

  17. Detecting Growth Shape Misspecifications in Latent Growth Models: An Evaluation of Fit Indexes

    Science.gov (United States)

    Leite, Walter L.; Stapleton, Laura M.

    2011-01-01

    In this study, the authors compared the likelihood ratio test and fit indexes for detection of misspecifications of growth shape in latent growth models through a simulation study and a graphical analysis. They found that the likelihood ratio test, MFI, and root mean square error of approximation performed best for detecting model misspecification…

  18. Fitting the Fractional Polynomial Model to Non-Gaussian Longitudinal Data

    Directory of Open Access Journals (Sweden)

    Ji Hoon Ryoo

    2017-08-01

    Full Text Available As in cross sectional studies, longitudinal studies involve non-Gaussian data such as binomial, Poisson, gamma, and inverse-Gaussian distributions, and multivariate exponential families. A number of statistical tools have thus been developed to deal with non-Gaussian longitudinal data, including analytic techniques to estimate parameters in both fixed and random effects models. However, as yet growth modeling with non-Gaussian data is somewhat limited when considering the transformed expectation of the response via a linear predictor as a functional form of explanatory variables. In this study, we introduce a fractional polynomial model (FPM that can be applied to model non-linear growth with non-Gaussian longitudinal data and demonstrate its use by fitting two empirical binary and count data models. The results clearly show the efficiency and flexibility of the FPM for such applications.

  19. [The Technology Acceptance Model and Its Application in a Telehealth Program for the Elderly With Chronic Illnesses].

    Science.gov (United States)

    Chang, Chi-Ping

    2015-06-01

    Many technology developments hold the potential to improve the quality of life of people and make life easier and more comfortable. New technologies have been well accepted by most people. Information sharing in particular is a major catalyst of change in our current technology-based society. Technology has widely innovated life and drastically changed lifestyles. The Technology Acceptance Model (TAM), a model developed to address the rapid advances in computer technology, is used to explain and predict user acceptance of new information technology. In the past, businesses have used the TAM as an assessment tool to predict user acceptance when introducing new technology products. They have also used external factors in the model to influence user perceptions and beliefs and to ensure the successful spread of new technologies. Informatization plays a critical role in healthcare services. Due to the rapid aging of populations and upward trends in the incidence of chronic illness, requirements for long-term care have increased in both quality and quantity. Therefore, there has been an increased emphasis on integrating healthcare and information technology. However, most elderly are significantly less adept at technology use than the general population. Therefore, we reexamined the effect that the essential concepts in a TAM exerted on technology acceptance. In the present study, the technology acceptance experience with regard to telehealth of the elderly was used as an example to explain how the revised technology acceptance model (TAM 2) may be effectively applied to enhance the understanding of technology care among nurses. The results may serve as a reference for future research on healthcare-technology use in long-term care or in elderly populations.

  20. Tanning Shade Gradations of Models in Mainstream Fitness and Muscle Enthusiast Magazines: Implications for Skin Cancer Prevention in Men.

    Science.gov (United States)

    Basch, Corey H; Hillyer, Grace Clarke; Ethan, Danna; Berdnik, Alyssa; Basch, Charles E

    2015-07-01

    Tanned skin has been associated with perceptions of fitness and social desirability. Portrayal of models in magazines may reflect and perpetuate these perceptions. Limited research has investigated tanning shade gradations of models in men's versus women's fitness and muscle enthusiast magazines. Such findings are relevant in light of increased incidence and prevalence of melanoma in the United States. This study evaluated and compared tanning shade gradations of adult Caucasian male and female model images in mainstream fitness and muscle enthusiast magazines. Sixty-nine U.S. magazine issues (spring and summer, 2013) were utilized. Two independent reviewers rated tanning shade gradations of adult Caucasian male and female model images on magazines' covers, advertisements, and feature articles. Shade gradations were assessed using stock photographs of Caucasian models with varying levels of tanned skin on an 8-shade scale. A total of 4,683 images were evaluated. Darkest tanning shades were found among males in muscle enthusiast magazines and lightest among females in women's mainstream fitness magazines. By gender, male model images were 54% more likely to portray a darker tanning shade. In this study, images in men's (vs. women's) fitness and muscle enthusiast magazines portrayed Caucasian models with darker skin shades. Despite these magazines' fitness-related messages, pro-tanning images may promote attitudes and behaviors associated with higher skin cancer risk. To date, this is the first study to explore tanning shades in men's magazines of these genres. Further research is necessary to identify effects of exposure to these images among male readers. © The Author(s) 2014.

  1. Acceptance of health information technology in health professionals: an application of the revised technology acceptance model.

    Science.gov (United States)

    Ketikidis, Panayiotis; Dimitrovski, Tomislav; Lazuras, Lambros; Bath, Peter A

    2012-06-01

    The response of health professionals to the use of health information technology (HIT) is an important research topic that can partly explain the success or failure of any HIT application. The present study applied a modified version of the revised technology acceptance model (TAM) to assess the relevant beliefs and acceptance of HIT systems in a sample of health professionals (n = 133). Structured anonymous questionnaires were used and a cross-sectional design was employed. The main outcome measure was the intention to use HIT systems. ANOVA was employed to examine differences in TAM-related variables between nurses and medical doctors, and no significant differences were found. Multiple linear regression analysis was used to assess the predictors of HIT usage intentions. The findings showed that perceived ease of use, but not usefulness, relevance and subjective norms directly predicted HIT usage intentions. The present findings suggest that a modification of the original TAM approach is needed to better understand health professionals' support and endorsement of HIT. Perceived ease of use, relevance of HIT to the medical and nursing professions, as well as social influences, should be tapped by information campaigns aiming to enhance support for HIT in healthcare settings.

  2. Source Localization with Acoustic Sensor Arrays Using Generative Model Based Fitting with Sparse Constraints

    Directory of Open Access Journals (Sweden)

    Javier Macias-Guarasa

    2012-10-01

    Full Text Available This paper presents a novel approach for indoor acoustic source localization using sensor arrays. The proposed solution starts by defining a generative model, designed to explain the acoustic power maps obtained by Steered Response Power (SRP strategies. An optimization approach is then proposed to fit the model to real input SRP data and estimate the position of the acoustic source. Adequately fitting the model to real SRP data, where noise and other unmodelled effects distort the ideal signal, is the core contribution of the paper. Two basic strategies in the optimization are proposed. First, sparse constraints in the parameters of the model are included, enforcing the number of simultaneous active sources to be limited. Second, subspace analysis is used to filter out portions of the input signal that cannot be explained by the model. Experimental results on a realistic speech database show statistically significant localization error reductions of up to 30% when compared with the SRP-PHAT strategies.

  3. An approximation to the adaptive exponential integrate-and-fire neuron model allows fast and predictive fitting to physiological data

    Directory of Open Access Journals (Sweden)

    Loreen eHertäg

    2012-09-01

    Full Text Available For large-scale network simulations, it is often desirable to have computationally tractable, yet in a defined sense still physiologically valid neuron models. In particular, these models should be able to reproduce physiological measurements, ideally in a predictive sense, and under different input regimes in which neurons may operate in vivo. Here we present an approach to parameter estimation for a simple spiking neuron model mainly based on standard f-I curves obtained from in vitro recordings. Such recordings are routinely obtained in standard protocols and assess a neuron's response under a wide range of mean input currents. Our fitting procedure makes use of closed-form expressions for the firing rate derived from an approximation to the adaptive exponential integrate-and-fire (AdEx model. The resulting fitting process is simple and about two orders of magnitude faster compared to methods based on numerical integration of the differential equations. We probe this method on different cell types recorded from rodent prefrontal cortex. After fitting to the f-I current-clamp data, the model cells are tested on completely different sets of recordings obtained by fluctuating ('in-vivo-like' input currents. For a wide range of different input regimes, cell types, and cortical layers, the model could predict spike times on these test traces quite accurately within the bounds of physiological reliability, although no information from these distinct test sets was used for model fitting. Further analyses delineated some of the empirical factors constraining model fitting and the model's generalization performance. An even simpler adaptive LIF neuron was also examined in this context. Hence, we have developed a 'high-throughput' model fitting procedure which is simple and fast, with good prediction performance, and which relies only on firing rate information and standard physiological data widely and easily available.

  4. A Technology Acceptance Model for Inter-Organisational Electronic Medical Records Systems

    Directory of Open Access Journals (Sweden)

    Jocelyn Handy

    2001-11-01

    Full Text Available This article reports the findings of the first stage of an ongoing, longitudinal study into the implementation of an interorganisational electronic medical records (EMR system. The study adapted and expanded Davis' (1993 technology acceptance model (TAM to investigate the attitudes of primary care practitioners towards a proposed system for maternity patients. All doctors and midwives holding maternity care contracts with a large urban hospital in New Zealand were sent a questionnaire soliciting their views on a planned EMR system linking the hospital and the primary care sectors. The results showed that whilst Davis' two key factors of perceived ease of use and perceived usefulness were important to medical professionals, another key factor, perceived system acceptability, which concerns control and management of information is vitally important to the acceptance of the system. The study also showed that the two groups of professionals had differing requirements due to different levels of experience and practice computerisation. Finally, the research highlights a number of wider organisational issues particularly relevant to the use of inter organisational systems in general and healthcare systems in particular.

  5. A Hierarchical Modeling for Reactive Power Optimization With Joint Transmission and Distribution Networks by Curve Fitting

    DEFF Research Database (Denmark)

    Ding, Tao; Li, Cheng; Huang, Can

    2018-01-01

    –slave structure and improves traditional centralized modeling methods by alleviating the big data problem in a control center. Specifically, the transmission-distribution-network coordination issue of the hierarchical modeling method is investigated. First, a curve-fitting approach is developed to provide a cost......In order to solve the reactive power optimization with joint transmission and distribution networks, a hierarchical modeling method is proposed in this paper. It allows the reactive power optimization of transmission and distribution networks to be performed separately, leading to a master...... optimality. Numerical results on two test systems verify the effectiveness of the proposed hierarchical modeling and curve-fitting methods....

  6. Examining the antecedents of Facebook acceptance via structural equation modeling: A case of CEGEP students

    Directory of Open Access Journals (Sweden)

    Tenzin Doleck

    2017-03-01

    Full Text Available Although the last decade has witnessed social networking sites of varied flavors, Facebook’s user growth continues to balloon, and relatedly, Facebook remains popular among the college populace. While there has been a growing body of work on ascertaining antecedents of Facebook use among college students, Collège d'enseignement général et professionnel (CEGEP students’ acceptance of Facebook remains underexplored. The purpose of this study was to analyze CEGEP students’ acceptance of Facebook using the technology acceptance model (TAM. Structural equation modeling was conducted on data from a survey of 214 CEGEP students. We find that Facebook use is motivated by the core TAM constructs as well as the added factors of peer influence, perceived enjoyment, perceived self-efficacy, relative advantage, risk, and trust.

  7. A Data-Driven Method for Selecting Optimal Models Based on Graphical Visualisation of Differences in Sequentially Fitted ROC Model Parameters

    Directory of Open Access Journals (Sweden)

    K S Mwitondi

    2013-05-01

    Full Text Available Differences in modelling techniques and model performance assessments typically impinge on the quality of knowledge extraction from data. We propose an algorithm for determining optimal patterns in data by separately training and testing three decision tree models in the Pima Indians Diabetes and the Bupa Liver Disorders datasets. Model performance is assessed using ROC curves and the Youden Index. Moving differences between sequential fitted parameters are then extracted, and their respective probability density estimations are used to track their variability using an iterative graphical data visualisation technique developed for this purpose. Our results show that the proposed strategy separates the groups more robustly than the plain ROC/Youden approach, eliminates obscurity, and minimizes over-fitting. Further, the algorithm can easily be understood by non-specialists and demonstrates multi-disciplinary compliance.

  8. Fast fitting of non-Gaussian state-space models to animal movement data via Template Model Builder

    DEFF Research Database (Denmark)

    Albertsen, Christoffer Moesgaard; Whoriskey, Kim; Yurkowski, David

    2015-01-01

    recommend using the Laplace approximation combined with automatic differentiation (as implemented in the novel R package Template Model Builder; TMB) for the fast fitting of continuous-time multivariate non-Gaussian SSMs. Through Argos satellite tracking data, we demonstrate that the use of continuous...... are able to estimate additional parameters compared to previous methods, all without requiring a substantial increase in computational time. The model implementation is made available through the R package argosTrack....

  9. Log-normal frailty models fitted as Poisson generalized linear mixed models.

    Science.gov (United States)

    Hirsch, Katharina; Wienke, Andreas; Kuss, Oliver

    2016-12-01

    The equivalence of a survival model with a piecewise constant baseline hazard function and a Poisson regression model has been known since decades. As shown in recent studies, this equivalence carries over to clustered survival data: A frailty model with a log-normal frailty term can be interpreted and estimated as a generalized linear mixed model with a binary response, a Poisson likelihood, and a specific offset. Proceeding this way, statistical theory and software for generalized linear mixed models are readily available for fitting frailty models. This gain in flexibility comes at the small price of (1) having to fix the number of pieces for the baseline hazard in advance and (2) having to "explode" the data set by the number of pieces. In this paper we extend the simulations of former studies by using a more realistic baseline hazard (Gompertz) and by comparing the model under consideration with competing models. Furthermore, the SAS macro %PCFrailty is introduced to apply the Poisson generalized linear mixed approach to frailty models. The simulations show good results for the shared frailty model. Our new %PCFrailty macro provides proper estimates, especially in case of 4 events per piece. The suggested Poisson generalized linear mixed approach for log-normal frailty models based on the %PCFrailty macro provides several advantages in the analysis of clustered survival data with respect to more flexible modelling of fixed and random effects, exact (in the sense of non-approximate) maximum likelihood estimation, and standard errors and different types of confidence intervals for all variance parameters. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  10. ICT & OTs: a model of information and communications technology acceptance and utilisation by occupational therapists (part 2).

    Science.gov (United States)

    Schaper, Louise; Pervan, Graham

    2007-01-01

    The research reported in this paper describes the development, empirical validation and analysis of a model of technology acceptance by Australian occupational therapists. The study described involved the collection of quantitative data through a national survey. The theoretical significance of this work is that it uses a thoroughly constructed research model, with one of the largest sample sizes ever tested (n=1605), to extend technology acceptance research into the health sector. Results provide strong support for the model. This work reveals the complexity of the constructs and relationships that influence technology acceptance and highlights the need to include sociotechnical and system issues in studies of technology acceptance in healthcare to improve information system implementation success in this arena. The results of this study have practical and theoretical implications for health informaticians and researchers in the field of health informatics and information systems, tertiary educators, Commonwealth and State Governments and the allied health professions.

  11. Acceptability and Feasibility of a Shared Decision-Making Model in Work Rehabilitation: A Mixed-Methods Study of Stakeholders' Perspectives.

    Science.gov (United States)

    Coutu, Marie-France; Légaré, France; Durand, Marie-José; Stacey, Dawn; Labrecque, Marie-Elise; Corbière, Marc; Bainbridge, Lesley

    2018-04-16

    Purpose To establish the acceptability and feasibility of implementing a shared decision-making (SDM) model in work rehabilitation. Methods We used a sequential mixed-methods design with diverse stakeholder groups (representatives of private and public employers, insurers, and unions, as well as workers having participated in a work rehabilitation program). First, a survey using a self-administered questionnaire enabled stakeholders to rate their level of agreement with the model's acceptability and feasibility and propose modifications, if necessary. Second, eight focus groups representing key stakeholders (n = 34) and four one-on-one interviews with workers were conducted, based on the questionnaire results. For each stakeholder group, we computed the percentage of agreement with the model's acceptability and feasibility and performed thematic analyses of the transcripts. Results Less than 50% of each stakeholder group initially agreed with the overall acceptability and feasibility of the model. Stakeholders proposed 37 modifications to the objectives, 17 to the activities, and 39 to improve the model's feasibility. Based on in-depth analysis of the transcripts, indicators were added to one objective, an interview guide was added as proposed by insurers to ensure compliance of the SDM process with insurance contract requirements, and one objective was reformulated. Conclusion Despite initially low agreement with the model's acceptability on the survey, subsequent discussions led to three minor changes and contributed to the model's ultimate acceptability and feasibility. Later steps will involve assessing the extent of implementation of the model in real rehabilitation settings to see if other modifications are necessary before assessing its impact.

  12. Multiple organ definition in CT using a Bayesian approach for 3D model fitting

    Science.gov (United States)

    Boes, Jennifer L.; Weymouth, Terry E.; Meyer, Charles R.

    1995-08-01

    Organ definition in computed tomography (CT) is of interest for treatment planning and response monitoring. We present a method for organ definition using a priori information about shape encoded in a set of biometric organ models--specifically for the liver and kidney-- that accurately represents patient population shape information. Each model is generated by averaging surfaces from a learning set of organ shapes previously registered into a standard space defined by a small set of landmarks. The model is placed in a specific patient's data set by identifying these landmarks and using them as the basis for model deformation; this preliminary representation is then iteratively fit to the patient's data based on a Bayesian formulation of the model's priors and CT edge information, yielding a complete organ surface. We demonstrate this technique using a set of fifteen abdominal CT data sets for liver surface definition both before and after the addition of a kidney model to the fitting; we demonstrate the effectiveness of this tool for organ surface definition in this low-contrast domain.

  13. An extended technology acceptance model for detecting influencing factors: An empirical investigation

    Directory of Open Access Journals (Sweden)

    Mohamd Hakkak

    2013-11-01

    Full Text Available The rapid diffusion of the Internet has radically changed the delivery channels applied by the financial services industry. The aim of this study is to identify the influencing factors that encourage customers to adopt online banking in Khorramabad. The research constructs are developed based on the technology acceptance model (TAM and incorporates some extra important control variables. The model is empirically verified to study the factors influencing the online banking adoption behavior of 210 customers of Tejarat Banks in Khorramabad. The findings of the study suggest that the quality of the internet connection, the awareness of online banking and its benefits, the social influence and computer self-efficacy have significant impacts on the perceived usefulness (PU and perceived ease of use (PEOU of online banking acceptance. Trust and resistance to change also have significant impact on the attitude towards the likelihood of adopting online banking.

  14. Multidisciplinary Teamwork in Autism: Can One Size Fit All?

    Science.gov (United States)

    Dillenburger, Karola; Röttgers, Hanns-Rüdiger; Dounavi, Katerina; Sparkman, Coleen; Keenan, Mickey; Thyer, Bruce; Nikopoulos, Christos

    2014-01-01

    Multidisciplinary practice has become an accepted approach in many education and social and health care fields. In fact, the right to a multidisciplinary assessment is enshrined in the United Nations Convention of the Rights for Persons with Disabilities (United Nations, 2007). In order to avert a "one size fits all" response to…

  15. Goodness-of-fit tests with dependent observations

    International Nuclear Information System (INIS)

    Chicheportiche, Rémy; Bouchaud, Jean-Philippe

    2011-01-01

    We revisit the Kolmogorov–Smirnov and Cramér–von Mises goodness-of-fit (GoF) tests and propose a generalization to identically distributed, but dependent univariate random variables. We show that the dependence leads to a reduction of the 'effective' number of independent observations. The generalized GoF tests are not distribution-free but rather depend on all the lagged bivariate copulas. These objects, that we call 'self-copulas', encode all the non-linear temporal dependences. We introduce a specific, log-normal model for these self-copulas, for which a number of analytical results are derived. An application to financial time series is provided. As is well known, the dependence is to be long-ranged in this case, a finding that we confirm using self-copulas. As a consequence, the acceptance rates for GoF tests are substantially higher than if the returns were iid random variables

  16. The 'fitting problem' in cosmology

    International Nuclear Information System (INIS)

    Ellis, G.F.R.; Stoeger, W.

    1987-01-01

    The paper considers the best way to fit an idealised exactly homogeneous and isotropic universe model to a realistic ('lumpy') universe; whether made explicit or not, some such approach of necessity underlies the use of the standard Robertson-Walker models as models of the real universe. Approaches based on averaging, normal coordinates and null data are presented, the latter offering the best opportunity to relate the fitting procedure to data obtainable by astronomical observations. (author)

  17. A fitting LEGACY – modelling Kepler's best stars

    Directory of Open Access Journals (Sweden)

    Aarslev Magnus J.

    2017-01-01

    Full Text Available The LEGACY sample represents the best solar-like stars observed in the Kepler mission[5, 8]. The 66 stars in the sample are all on the main sequence or only slightly more evolved. They each have more than one year's observation data in short cadence, allowing for precise extraction of individual frequencies. Here we present model fits using a modified ASTFIT procedure employing two different near-surface-effect corrections, one by Christensen-Dalsgaard[4] and a newer correction proposed by Ball & Gizon[1]. We then compare the results obtained using the different corrections. We find that using the latter correction yields lower masses and significantly lower χ2 values for a large part of the sample.

  18. Culture and Parenting: Family Models Are Not One-Size-Fits-All. FPG Snapshot #67

    Science.gov (United States)

    FPG Child Development Institute, 2012

    2012-01-01

    Family process models guide theories and research about family functioning and child development outcomes. Theory and research, in turn, inform policies and services aimed at families. But are widely accepted models valid across cultural groups? To address these gaps, FPG researchers examined the utility of two family process models for families…

  19. Evaluation of marginal/internal fit of chrome-cobalt crowns: Direct laser metal sintering versus computer-aided design and computer-aided manufacturing.

    Science.gov (United States)

    Gunsoy, S; Ulusoy, M

    2016-01-01

    The purpose of this study was to evaluate the internal and marginal fit of chrome cobalt (Co-Cr) crowns were fabricated with laser sintering, computer-aided design (CAD) and computer-aided manufacturing, and conventional methods. Polyamide master and working models were designed and fabricated. The models were initially designed with a software application for three-dimensional (3D) CAD (Maya, Autodesk Inc.). All models were fabricated models were produced by a 3D printer (EOSINT P380 SLS, EOS). 128 1-unit Co-Cr fixed dental prostheses were fabricated with four different techniques: Conventional lost wax method, milled wax with lost-wax method (MWLW), direct laser metal sintering (DLMS), and milled Co-Cr (MCo-Cr). The cement film thickness of the marginal and internal gaps was measured by an observer using a stereomicroscope after taking digital photos in ×24. Best fit rates according to mean and standard deviations of all measurements was in DLMS both in premolar (65.84) and molar (58.38) models in μm. A significant difference was found DLMS and the rest of fabrication techniques (P 0.05). DMLS was best fitting fabrication techniques for single crown based on the results.The best fit was found in marginal; the larger gap was found in occlusal.All groups were within the clinically acceptable misfit range.

  20. Fitting the CDO correlation skew: a tractable structural jump-diffusion model

    DEFF Research Database (Denmark)

    Willemann, Søren

    2007-01-01

    We extend a well-known structural jump-diffusion model for credit risk to handle both correlations through diffusion of asset values and common jumps in asset value. Through a simplifying assumption on the default timing and efficient numerical techniques, we develop a semi-analytic framework...... allowing for instantaneous calibration to heterogeneous CDS curves and fast computation of CDO tranche spreads. We calibrate the model to CDX and iTraxx data from February 2007 and achieve a satisfactory fit. To price the senior tranches for both indices, we require a risk-neutral probability of a market...

  1. A Behavioral Model of Managerial Perspectives Regarding Technology Acceptance in Building Energy Management Systems

    Directory of Open Access Journals (Sweden)

    Jacky Chin

    2016-07-01

    Full Text Available The Building Energy Management System (BEMS, a well-known system that has been implemented in some energy corporations, has become attractive to many companies seeking to better monitor their energy consumption efficiency. This study investigated the external factors that influence acceptance of the BEMS from managerial perspectives. An extended model based on the Technology Acceptance Model (TAM was created to evaluate the implementation of the BEMS in the manufacturing industries. A structural equation modeling (SEM approach was used to analyze the model by adopting compatibility, features, technology complexity, and perceived risk as the external variables, and integrating the five dimensions of perceived ease of use, perceived usefulness, attitude, user satisfaction, and behavioral intention. The analysis results indicated that the external factors positively influenced users’ behavioral intention to use the BEMS through expected satisfaction, perceived ease of use, and perceived usefulness. Suggestions for BEMS developers are provided as well.

  2. Development and design of a late-model fitness test instrument based on LabView

    Science.gov (United States)

    Xie, Ying; Wu, Feiqing

    2010-12-01

    Undergraduates are pioneers of China's modernization program and undertake the historic mission of rejuvenating our nation in the 21st century, whose physical fitness is vital. A smart fitness test system can well help them understand their fitness and health conditions, thus they can choose more suitable approaches and make practical plans for exercising according to their own situation. following the future trends, a Late-model fitness test Instrument based on LabView has been designed to remedy defects of today's instruments. The system hardware consists of fives types of sensors with their peripheral circuits, an acquisition card of NI USB-6251 and a computer, while the system software, on the basis of LabView, includes modules of user register, data acquisition, data process and display, and data storage. The system, featured by modularization and an open structure, is able to be revised according to actual needs. Tests results have verified the system's stability and reliability.

  3. Invited commentary: Lost in estimation--searching for alternatives to markov chains to fit complex Bayesian models.

    Science.gov (United States)

    Molitor, John

    2012-03-01

    Bayesian methods have seen an increase in popularity in a wide variety of scientific fields, including epidemiology. One of the main reasons for their widespread application is the power of the Markov chain Monte Carlo (MCMC) techniques generally used to fit these models. As a result, researchers often implicitly associate Bayesian models with MCMC estimation procedures. However, Bayesian models do not always require Markov-chain-based methods for parameter estimation. This is important, as MCMC estimation methods, while generally quite powerful, are complex and computationally expensive and suffer from convergence problems related to the manner in which they generate correlated samples used to estimate probability distributions for parameters of interest. In this issue of the Journal, Cole et al. (Am J Epidemiol. 2012;175(5):368-375) present an interesting paper that discusses non-Markov-chain-based approaches to fitting Bayesian models. These methods, though limited, can overcome some of the problems associated with MCMC techniques and promise to provide simpler approaches to fitting Bayesian models. Applied researchers will find these estimation approaches intuitively appealing and will gain a deeper understanding of Bayesian models through their use. However, readers should be aware that other non-Markov-chain-based methods are currently in active development and have been widely published in other fields.

  4. The Acceptance Model of Intuitive Eating: A Comparison of Women in Emerging Adulthood, Early Adulthood, and Middle Adulthood

    Science.gov (United States)

    Augustus-Horvath, Casey L.; Tylka, Tracy L.

    2011-01-01

    The acceptance model of intuitive eating (Avalos & Tylka, 2006) posits that body acceptance by others helps women appreciate their body and resist adopting an observer's perspective of their body, which contribute to their eating intuitively/adaptively. We extended this model by integrating body mass index (BMI) into its structure and…

  5. Fitting N-mixture models to count data with unmodeled heterogeneity: Bias, diagnostics, and alternative approaches

    Science.gov (United States)

    Duarte, Adam; Adams, Michael J.; Peterson, James T.

    2018-01-01

    Monitoring animal populations is central to wildlife and fisheries management, and the use of N-mixture models toward these efforts has markedly increased in recent years. Nevertheless, relatively little work has evaluated estimator performance when basic assumptions are violated. Moreover, diagnostics to identify when bias in parameter estimates from N-mixture models is likely is largely unexplored. We simulated count data sets using 837 combinations of detection probability, number of sample units, number of survey occasions, and type and extent of heterogeneity in abundance or detectability. We fit Poisson N-mixture models to these data, quantified the bias associated with each combination, and evaluated if the parametric bootstrap goodness-of-fit (GOF) test can be used to indicate bias in parameter estimates. We also explored if assumption violations can be diagnosed prior to fitting N-mixture models. In doing so, we propose a new model diagnostic, which we term the quasi-coefficient of variation (QCV). N-mixture models performed well when assumptions were met and detection probabilities were moderate (i.e., ≥0.3), and the performance of the estimator improved with increasing survey occasions and sample units. However, the magnitude of bias in estimated mean abundance with even slight amounts of unmodeled heterogeneity was substantial. The parametric bootstrap GOF test did not perform well as a diagnostic for bias in parameter estimates when detectability and sample sizes were low. The results indicate the QCV is useful to diagnose potential bias and that potential bias associated with unidirectional trends in abundance or detectability can be diagnosed using Poisson regression. This study represents the most thorough assessment to date of assumption violations and diagnostics when fitting N-mixture models using the most commonly implemented error distribution. Unbiased estimates of population state variables are needed to properly inform management decision

  6. Decision making on fitness landscapes

    Science.gov (United States)

    Arthur, R.; Sibani, P.

    2017-04-01

    We discuss fitness landscapes and how they can be modified to account for co-evolution. We are interested in using the landscape as a way to model rational decision making in a toy economic system. We develop a model very similar to the Tangled Nature Model of Christensen et al. that we call the Tangled Decision Model. This is a natural setting for our discussion of co-evolutionary fitness landscapes. We use a Monte Carlo step to simulate decision making and investigate two different decision making procedures.

  7. Decision Making on Fitness Landscapes

    DEFF Research Database (Denmark)

    Arthur, Rudy; Sibani, Paolo

    2017-01-01

    We discuss fitness landscapes and how they can be modified to account for co-evolution. We are interested in using the landscape as a way to model rational decision making in a toy economic system. We develop a model very similar to the Tangled Nature Model of Christensen et. al. that we call...... the Tangled Decision Model. This is a natural setting for our discussion of co-evolutionary fitness landscapes. We use a Monte Carlo step to simulate decision making and investigate two different decision making procedures....

  8. Welding of large-size embelled fittings in NPP construction

    International Nuclear Information System (INIS)

    Semenov, N.A.; Savinov, O.A.

    1988-01-01

    Drawbacks of the accepted technology for peoducing embedded fittings are considered. Activities on modernization of the standard ADF-2001 automatic welding machine are described. Results of testing the samples of welded joints performed using the modernized automatic welding machine, and economic effect caused by its introduction at the balakovo NPP second unit construction are presented

  9. Assessing a moderating effect and the global fit of a PLS model on online trading

    Directory of Open Access Journals (Sweden)

    Juan J. García-Machado

    2017-12-01

    Full Text Available This paper proposes a PLS Model for the study of Online Trading. Traditional investing has experienced a revolution due to the rise of e-trading services that enable investors to use Internet conduct secure trading. On the hand, model results show that there is a positive, direct and statistically significant relationship between personal outcome expectations, perceived relative advantage, shared vision and economy-based trust with the quality of knowledge. On the other hand, trading frequency and portfolio performance has also this relationship. After including the investor’s income and financial wealth (IFW as moderating effect, the PLS model was enhanced, and we found that the interaction term is negative and statistically significant, so, higher IFW levels entail a weaker relationship between trading frequency and portfolio performance and vice-versa. Finally, with regard to the goodness of overall model fit measures, they showed that the model is fit for SRMR and dG measures, so it is likely that the model is true.

  10. Fit for Duty?: Evaluating the Physical Fitness Requirements of Battlefield Airmen.

    Science.gov (United States)

    Sean, Robson; Maria C, Lytell; Carra S, Sims; Stephanie, Pezard; Thomas, Manacapilli; Amanda, Anderson; Therese, Bohusch; Abigail, Haddad

    2018-01-01

    Military occupations can be physically demanding, yet few attempts have been made to determine the physical readiness of today's airmen to perform their jobs. Although the Air Force conducts fitness testing of all its airmen, these tests and standards are not based on validated job requirements. As part of a broader Air Force effort to measure the physical readiness of airmen to perform their jobs, this study describes a methodology for establishing physical fitness standards for four physically demanding Air Force occupational specialties-combat controller, pararescue, special operations weather team, and tactical air control party. Airmen in these specialties are collectively known as battlefield airmen. The authors sought to identify the physically demanding tasks required of battlefield airmen and ways in which fitness standards might be established to ensure that individuals in these specialties are able to perform these tasks. They reviewed the research literature and relevant military documents, conducted focus groups and interviews with battlefield airmen and other subject matter experts, and analyzed the movement patterns and physical abilities associated with each task. They found a high demand across the four specialities for strength and muscular and cardiovascular endurance, followed by agility, anaerobic power, and equilibrium, whereas they found flexibility to be less critically important. The authors recommend that a validation study be conducted next, to (a) ensure that tests measure important physical abilities required for successful mission or job performance, (b) ensure that performance on tests is a good indicator of mission or job performance, and (c) identify minimum test standards that are associated with acceptable mission or job performance.

  11. INVESTIGATION THE FITTING ACCURACY OF CAST AND SLM CO-CR DENTAL BRIDGES USING CAD SOFTWARE

    Directory of Open Access Journals (Sweden)

    Tsanka Dikova

    2017-09-01

    Full Text Available The aim of the present paper is to investigate the fitting accuracy of Co-Cr dental bridges, manufactured by three technologies, with the newly developed method using CAD software. The four-part dental bridges of Co-Cr alloys were produced by conventional casting of wax models, casting with 3D printed patterns and selective laser melting. The marginal and internal fit of dental bridges was studied out by two methods – silicone replica test and CAD software. As the silicone replica test characterizes with comparatively low accuracy, a new methodology for investigating the fitting accuracy of dental bridges was developed based on the SolidWorks CAD software. The newly developed method allows the study of the marginal and internal adaptation in unlimited directions and high accuracy. Investigation the marginal fit and internal adaptation of Co-Cr four-part dental bridges by the two methods show that the technological process strongly influences the fitting accuracy of dental restorations. The fitting accuracy of the bridges, cast with 3D printed patterns, is the highest, followed by the SLM and conventionally cast bridges. The marginal fit of the three groups of bridges is in the clinically acceptable range. The internal gap values vary in different regions – it is highest on the occlusal surfaces, followed by that in the marginal and axial areas. The higher fitting accuracy of the bridges, manufactured by casting with 3D printed patterns and SLM, compared to the conventionally cast bridges is a good precondition for their successful implementation in the dental offices and laboratories.

  12. Phylogenetic tree reconstruction accuracy and model fit when proportions of variable sites change across the tree.

    Science.gov (United States)

    Shavit Grievink, Liat; Penny, David; Hendy, Michael D; Holland, Barbara R

    2010-05-01

    Commonly used phylogenetic models assume a homogeneous process through time in all parts of the tree. However, it is known that these models can be too simplistic as they do not account for nonhomogeneous lineage-specific properties. In particular, it is now widely recognized that as constraints on sequences evolve, the proportion and positions of variable sites can vary between lineages causing heterotachy. The extent to which this model misspecification affects tree reconstruction is still unknown. Here, we evaluate the effect of changes in the proportions and positions of variable sites on model fit and tree estimation. We consider 5 current models of nucleotide sequence evolution in a Bayesian Markov chain Monte Carlo framework as well as maximum parsimony (MP). We show that for a tree with 4 lineages where 2 nonsister taxa undergo a change in the proportion of variable sites tree reconstruction under the best-fitting model, which is chosen using a relative test, often results in the wrong tree. In this case, we found that an absolute test of model fit is a better predictor of tree estimation accuracy. We also found further evidence that MP is not immune to heterotachy. In addition, we show that increased sampling of taxa that have undergone a change in proportion and positions of variable sites is critical for accurate tree reconstruction.

  13. Measuring fit of sequence data to phylogenetic model: gain of power using marginal tests.

    Science.gov (United States)

    Waddell, Peter J; Ota, Rissa; Penny, David

    2009-10-01

    Testing fit of data to model is fundamentally important to any science, but publications in the field of phylogenetics rarely do this. Such analyses discard fundamental aspects of science as prescribed by Karl Popper. Indeed, not without cause, Popper (Unended quest: an intellectual autobiography. Fontana, London, 1976) once argued that evolutionary biology was unscientific as its hypotheses were untestable. Here we trace developments in assessing fit from Penny et al. (Nature 297:197-200, 1982) to the present. We compare the general log-likelihood ratio (the G or G (2) statistic) statistic between the evolutionary tree model and the multinomial model with that of marginalized tests applied to an alignment (using placental mammal coding sequence data). It is seen that the most general test does not reject the fit of data to model (P approximately 0.5), but the marginalized tests do. Tests on pairwise frequency (F) matrices, strongly (P < 0.001) reject the most general phylogenetic (GTR) models commonly in use. It is also clear (P < 0.01) that the sequences are not stationary in their nucleotide composition. Deviations from stationarity and homogeneity seem to be unevenly distributed amongst taxa; not necessarily those expected from examining other regions of the genome. By marginalizing the 4( t ) patterns of the i.i.d. model to observed and expected parsimony counts, that is, from constant sites, to singletons, to parsimony informative characters of a minimum possible length, then the likelihood ratio test regains power, and it too rejects the evolutionary model with P < 0.001. Given such behavior over relatively recent evolutionary time, readers in general should maintain a healthy skepticism of results, as the scale of the systematic errors in published trees may really be far larger than the analytical methods (e.g., bootstrap) report.

  14. UROX 2.0: an interactive tool for fitting atomic models into electron-microscopy reconstructions

    International Nuclear Information System (INIS)

    Siebert, Xavier; Navaza, Jorge

    2009-01-01

    UROX is software designed for the interactive fitting of atomic models into electron-microscopy reconstructions. The main features of the software are presented, along with a few examples. Electron microscopy of a macromolecular structure can lead to three-dimensional reconstructions with resolutions that are typically in the 30–10 Å range and sometimes even beyond 10 Å. Fitting atomic models of the individual components of the macromolecular structure (e.g. those obtained by X-ray crystallography or nuclear magnetic resonance) into an electron-microscopy map allows the interpretation of the latter at near-atomic resolution, providing insight into the interactions between the components. Graphical software is presented that was designed for the interactive fitting and refinement of atomic models into electron-microscopy reconstructions. Several characteristics enable it to be applied over a wide range of cases and resolutions. Firstly, calculations are performed in reciprocal space, which results in fast algorithms. This allows the entire reconstruction (or at least a sizeable portion of it) to be used by taking into account the symmetry of the reconstruction both in the calculations and in the graphical display. Secondly, atomic models can be placed graphically in the map while the correlation between the model-based electron density and the electron-microscopy reconstruction is computed and displayed in real time. The positions and orientations of the models are refined by a least-squares minimization. Thirdly, normal-mode calculations can be used to simulate conformational changes between the atomic model of an individual component and its corresponding density within a macromolecular complex determined by electron microscopy. These features are illustrated using three practical cases with different symmetries and resolutions. The software, together with examples and user instructions, is available free of charge at http://mem.ibs.fr/UROX/

  15. The Role of Psychopathy and Exposure to Violence in Rape Myth Acceptance.

    Science.gov (United States)

    Debowska, Agata; Boduszek, Daniel; Dhingra, Katie; Kola, Susanna; Meller-Prunska, Aleksandra

    2015-09-01

    The main aim of the present study was to specify and test a structural model to examine the relationships between four psychopathy dimensions (Interpersonal Manipulation, Callous Affect, Erratic Lifestyle, and Antisocial Behavior), childhood exposure to violence, and rape myth acceptance while controlling for gender, age, sample type (prisoner vs. non-prisoner), and relationship status. Participants were a sample of non-offending adults (n = 319) recruited from the University of Security in Poznan, and a sample of prisoners (n = 129) incarcerated in Stargard Szczecinski Prison. Results indicated that the model provided a good fit for the data, and that Callous Affect and childhood exposure to violence had a significant positive effect on attitudes toward rape and rape victims. Theoretical and practical implications of our findings are discussed. © The Author(s) 2014.

  16. Fitness, Sleep-Disordered Breathing, Symptoms of Depression, and Cognition in Inactive Overweight Children: Mediation Models.

    Science.gov (United States)

    Stojek, Monika M K; Montoya, Amanda K; Drescher, Christopher F; Newberry, Andrew; Sultan, Zain; Williams, Celestine F; Pollock, Norman K; Davis, Catherine L

    We used mediation models to examine the mechanisms underlying the relationships among physical fitness, sleep-disordered breathing (SDB), symptoms of depression, and cognitive functioning. We conducted a cross-sectional secondary analysis of the cohorts involved in the 2003-2006 project PLAY (a trial of the effects of aerobic exercise on health and cognition) and the 2008-2011 SMART study (a trial of the effects of exercise on cognition). A total of 397 inactive overweight children aged 7-11 received a fitness test, standardized cognitive test (Cognitive Assessment System, yielding Planning, Attention, Simultaneous, Successive, and Full Scale scores), and depression questionnaire. Parents completed a Pediatric Sleep Questionnaire. We used bootstrapped mediation analyses to test whether SDB mediated the relationship between fitness and depression and whether SDB and depression mediated the relationship between fitness and cognition. Fitness was negatively associated with depression ( B = -0.041; 95% CI, -0.06 to -0.02) and SDB ( B = -0.005; 95% CI, -0.01 to -0.001). SDB was positively associated with depression ( B = 0.99; 95% CI, 0.32 to 1.67) after controlling for fitness. The relationship between fitness and depression was mediated by SDB (indirect effect = -0.005; 95% CI, -0.01 to -0.0004). The relationship between fitness and the attention component of cognition was independently mediated by SDB (indirect effect = 0.058; 95% CI, 0.004 to 0.13) and depression (indirect effect = -0.071; 95% CI, -0.01 to -0.17). SDB mediates the relationship between fitness and depression, and SDB and depression separately mediate the relationship between fitness and the attention component of cognition.

  17. The Predicting Model of E-commerce Site Based on the Ideas of Curve Fitting

    Science.gov (United States)

    Tao, Zhang; Li, Zhang; Dingjun, Chen

    On the basis of the idea of the second multiplication curve fitting, the number and scale of Chinese E-commerce site is analyzed. A preventing increase model is introduced in this paper, and the model parameters are solved by the software of Matlab. The validity of the preventing increase model is confirmed though the numerical experiment. The experimental results show that the precision of preventing increase model is ideal.

  18. Consumers’ Acceptance and Use of Information and Communications Technology: A UTAUT and Flow Based Theoretical Model

    Directory of Open Access Journals (Sweden)

    Saleh Alwahaishi

    2013-03-01

    Full Text Available The world has changed a lot in the past years. The rapid advances in technology and the changing of the communication channels have changed the way people work and, for many, where do they work from. The Internet and mobile technology, the two most dynamic technological forces in modern information and communications technology (ICT are converging into one ubiquitous mobile Internet service, which will change our way of both doing business and dealing with our daily routine activities. As the use of ICT expands globally, there is need for further research into cultural aspects and implications of ICT. The acceptance of Information Technology (IT has become a fundamental part of the research plan for most organizations (Igbaria 1993. In IT research, numerous theories are used to understand users’ adoption of new technologies. Various models were developed including the Technology Acceptance Model, Theory of Reasoned Action, Theory of Planned Behavior, and recently, the Unified Theory of Acceptance and Use of Technology. Each of these models has sought to identify the factors which influence a citizen’s intention or actual use of information technology. Drawing on the UTAUT model and Flow Theory, this research composes a new hybrid theoretical framework to identify the factors affecting the acceptance and use of Mobile Internet -as an ICT application- in a consumer context. The proposed model incorporates eight constructs: Performance Expectancy, Effort Expectancy, Facilitating Conditions, Social Influences, Perceived Value, Perceived Playfulness, Attention Focus, and Behavioral intention. Data collected online from 238 respondents in Saudi Arabia were tested against the research model, using the structural equation modeling approach. The proposed model was mostly supported by the empirical data. The findings of this study provide several crucial implications for ICT and, in particular, mobile Internet service practitioners and researchers

  19. Testing the validity of stock-recruitment curve fits

    International Nuclear Information System (INIS)

    Christensen, S.W.; Goodyear, C.P.

    1988-01-01

    The utilities relied heavily on the Ricker stock-recruitment model as the basis for quantifying biological compensation in the Hudson River power case. They presented many fits of the Ricker model to data derived from striped bass catch and effort records compiled by the National Marine Fisheries Service. Based on this curve-fitting exercise, a value of 4 was chosen for the parameter alpha in the Ricker model, and this value was used to derive the utilities' estimates of the long-term impact of power plants on striped bass populations. A technique was developed and applied to address a single fundamental question: if the Ricker model were applicable to the Hudson River striped bass population, could the estimates of alpha from the curve-fitting exercise be considered reliable. The technique involved constructing a simulation model that incorporated the essential biological features of the population and simulated the characteristics of the available actual catch-per-unit-effort data through time. The ability or failure to retrieve the known parameter values underlying the simulation model via the curve-fitting exercise was a direct test of the reliability of the results of fitting stock-recruitment curves to the real data. The results demonstrated that estimates of alpha from the curve-fitting exercise were not reliable. The simulation-modeling technique provides an effective way to identify whether or not particular data are appropriate for use in fitting such models. 39 refs., 2 figs., 3 tabs

  20. Modeling canopy-level productivity: is the "big-leaf" simplification acceptable?

    Science.gov (United States)

    Sprintsin, M.; Chen, J. M.

    2009-05-01

    The "big-leaf" approach to calculating the carbon balance of plant canopies assumes that canopy carbon fluxes have the same relative responses to the environment as any single unshaded leaf in the upper canopy. Widely used light use efficiency models are essentially simplified versions of the big-leaf model. Despite its wide acceptance, subsequent developments in the modeling of leaf photosynthesis and measurements of canopy physiology have brought into question the assumptions behind this approach showing that big leaf approximation is inadequate for simulating canopy photosynthesis because of the additional leaf internal control on carbon assimilation and because of the non-linear response of photosynthesis on leaf nitrogen and absorbed light, and changes in leaf microenvironment with canopy depth. To avoid this problem a sunlit/shaded leaf separation approach, within which the vegetation is treated as two big leaves under different illumination conditions, is gradually replacing the "big-leaf" strategy, for applications at local and regional scales. Such separation is now widely accepted as a more accurate and physiologically based approach for modeling canopy photosynthesis. Here we compare both strategies for Gross Primary Production (GPP) modeling using the Boreal Ecosystem Productivity Simulator (BEPS) at local (tower footprint) scale for different land cover types spread over North America: two broadleaf forests (Harvard, Massachusetts and Missouri Ozark, Missouri); two coniferous forests (Howland, Maine and Old Black Spruce, Saskatchewan); Lost Creek shrubland site (Wisconsin) and Mer Bleue petland (Ontario). BEPS calculates carbon fixation by scaling Farquhar's leaf biochemical model up to canopy level with stomatal conductance estimated by a modified version of the Ball-Woodrow-Berry model. The "big-leaf" approach was parameterized using derived leaf level parameters scaled up to canopy level by means of Leaf Area Index. The influence of sunlit

  1. Describing the Process of Adopting Nutrition and Fitness Apps: Behavior Stage Model Approach.

    Science.gov (United States)

    König, Laura M; Sproesser, Gudrun; Schupp, Harald T; Renner, Britta

    2018-03-13

    Although mobile technologies such as smartphone apps are promising means for motivating people to adopt a healthier lifestyle (mHealth apps), previous studies have shown low adoption and continued use rates. Developing the means to address this issue requires further understanding of mHealth app nonusers and adoption processes. This study utilized a stage model approach based on the Precaution Adoption Process Model (PAPM), which proposes that people pass through qualitatively different motivational stages when adopting a behavior. To establish a better understanding of between-stage transitions during app adoption, this study aimed to investigate the adoption process of nutrition and fitness app usage, and the sociodemographic and behavioral characteristics and decision-making style preferences of people at different adoption stages. Participants (N=1236) were recruited onsite within the cohort study Konstanz Life Study. Use of mobile devices and nutrition and fitness apps, 5 behavior adoption stages of using nutrition and fitness apps, preference for intuition and deliberation in eating decision-making (E-PID), healthy eating style, sociodemographic variables, and body mass index (BMI) were assessed. Analysis of the 5 behavior adoption stages showed that stage 1 ("unengaged") was the most prevalent motivational stage for both nutrition and fitness app use, with half of the participants stating that they had never thought about using a nutrition app (52.41%, 533/1017), whereas less than one-third stated they had never thought about using a fitness app (29.25%, 301/1029). "Unengaged" nonusers (stage 1) showed a higher preference for an intuitive decision-making style when making eating decisions, whereas those who were already "acting" (stage 4) showed a greater preference for a deliberative decision-making style (F 4,1012 =21.83, Pdigital interventions. This study highlights that new user groups might be better reached by apps designed to address a more intuitive

  2. Modelling job support, job fit, job role and job satisfaction for school of nursing sessional academic staff.

    Science.gov (United States)

    Cowin, Leanne S; Moroney, Robyn

    2018-01-01

    Sessional academic staff are an important part of nursing education. Increases in casualisation of the academic workforce continue and satisfaction with the job role is an important bench mark for quality curricula delivery and influences recruitment and retention. This study examined relations between four job constructs - organisation fit, organisation support, staff role and job satisfaction for Sessional Academic Staff at a School of Nursing by creating two path analysis models. A cross-sectional correlational survey design was utilised. Participants who were currently working as sessional or casual teaching staff members were invited to complete an online anonymous survey. The data represents a convenience sample of Sessional Academic Staff in 2016 at a large school of Nursing and Midwifery in Australia. After psychometric evaluation of each of the job construct measures in this study we utilised Structural Equation Modelling to better understand the relations of the variables. The measures used in this study were found to be both valid and reliable for this sample. Job support and job fit are positively linked to job satisfaction. Although the hypothesised model did not meet model fit standards, a new 'nested' model made substantive sense. This small study explored a new scale for measuring academic job role, and demonstrated how it promotes the constructs of job fit and job supports. All four job constructs are important in providing job satisfaction - an outcome that in turn supports staffing stability, retention, and motivation.

  3. An Empirical Assessment of a Technology Acceptance Model for Apps in Medical Education.

    Science.gov (United States)

    Briz-Ponce, Laura; García-Peñalvo, Francisco José

    2015-11-01

    The evolution and the growth of mobile applications ("apps") in our society is a reality. This general trend is still upward and the app use has also penetrated the medical education community. However, there is a lot of unawareness of the students' and professionals' point of view about introducing "apps" within Medical School curriculum. The aim of this research is to design, implement and verify that the Technology Acceptance Model (TAM) can be employed to measure and explain the acceptance of mobile technology and "apps" within Medical Education. The methodology was based on a survey distributed to students and medical professionals from University of Salamanca. This model explains 46.7% of behavioral intention to use mobile devise or "apps" for learning and will help us to justify and understand the current situation of introducing "apps" into the Medical School curriculum.

  4. THE USE OF INFORMATION COMMUNICATION TECHNOLOGY (ICT AS THE TECHNOLOGY ACCEPTANCE MODEL (TAM OF MOBILE BANKING

    Directory of Open Access Journals (Sweden)

    Paulus Yokie Radnan

    2018-01-01

    Full Text Available Information Technology services in banking business which is very dynamic and advanced makes the bankers must adjust to the presence of this technology. In this paper, the authors will explain the role of Mobile banking technology which is provided by CIMB Niaga in servicing its customers for banking transactions. The methodology used in this paper is quantitative with the purposive sampling one. Instrument used the Technology Acceptance Model (TAM as developed by Parasuraman and Davis by modifying them to fit the state of the research object. This research was conducted in Jakarta and several other places. Research and data collection took 6 months from November 2015 to April 2016. The variables included trust, perceived use (PU, perceived ease of use (PEU, attitude toward use (ATU, Intent to use (ITU, and actual use (AU. After the data were collected, the regression analysis was performed. From the analysis result it was found that trust and perceived use (PU variables did not positively and significantly influence the intent to use (ITU variable, as well as the perceived use variables (PU and perceived ease of use (PEU which have no significant and positive effect on attitude variable on usage (ATU. For that case, the authors propose an improvement strategy to maintain and grow this business forward.

  5. A differential equation for the asymptotic fitness distribution in the Bak-Sneppen model with five species.

    Science.gov (United States)

    Schlemm, Eckhard

    2015-09-01

    The Bak-Sneppen model is an abstract representation of a biological system that evolves according to the Darwinian principles of random mutation and selection. The species in the system are characterized by a numerical fitness value between zero and one. We show that in the case of five species the steady-state fitness distribution can be obtained as a solution to a linear differential equation of order five with hypergeometric coefficients. Similar representations for the asymptotic fitness distribution in larger systems may help pave the way towards a resolution of the question of whether or not, in the limit of infinitely many species, the fitness is asymptotically uniformly distributed on the interval [fc, 1] with fc ≳ 2/3. Copyright © 2015 Elsevier Inc. All rights reserved.

  6. Permutation tests for goodness-of-fit testing of mathematical models to experimental data.

    Science.gov (United States)

    Fişek, M Hamit; Barlas, Zeynep

    2013-03-01

    This paper presents statistical procedures for improving the goodness-of-fit testing of theoretical models to data obtained from laboratory experiments. We use an experimental study in the expectation states research tradition which has been carried out in the "standardized experimental situation" associated with the program to illustrate the application of our procedures. We briefly review the expectation states research program and the fundamentals of resampling statistics as we develop our procedures in the resampling context. The first procedure we develop is a modification of the chi-square test which has been the primary statistical tool for assessing goodness of fit in the EST research program, but has problems associated with its use. We discuss these problems and suggest a procedure to overcome them. The second procedure we present, the "Average Absolute Deviation" test, is a new test and is proposed as an alternative to the chi square test, as being simpler and more informative. The third and fourth procedures are permutation versions of Jonckheere's test for ordered alternatives, and Kendall's tau(b), a rank order correlation coefficient. The fifth procedure is a new rank order goodness-of-fit test, which we call the "Deviation from Ideal Ranking" index, which we believe may be more useful than other rank order tests for assessing goodness-of-fit of models to experimental data. The application of these procedures to the sample data is illustrated in detail. We then present another laboratory study from an experimental paradigm different from the expectation states paradigm - the "network exchange" paradigm, and describe how our procedures may be applied to this data set. Copyright © 2012 Elsevier Inc. All rights reserved.

  7. Invariance of an Extended Technology Acceptance Model Across Gender and Age Group

    Science.gov (United States)

    Ahmad, Tunku Badariah Tunku; Madarsha, Kamal Basha; Zainuddin, Ahmad Marzuki; Ismail, Nik Ahmad Hisham; Khairani, Ahmad Zamri; Nordin, Mohamad Sahari

    2011-01-01

    In this study, we examined the likelihood of a TAME (extended technology acceptance model), in which the interrelationships among computer self-efficacy, perceived usefulness, intention to use and self-reported use of computer-mediated technology were tested. In addition, the gender- and age-invariant of its causal structure were evaluated. The…

  8. THE HERSCHEL ORION PROTOSTAR SURVEY: SPECTRAL ENERGY DISTRIBUTIONS AND FITS USING A GRID OF PROTOSTELLAR MODELS

    Energy Technology Data Exchange (ETDEWEB)

    Furlan, E. [Infrared Processing and Analysis Center, California Institute of Technology, 770 S. Wilson Ave., Pasadena, CA 91125 (United States); Fischer, W. J. [Goddard Space Flight Center, 8800 Greenbelt Road, Greenbelt, MD 20771 (United States); Ali, B. [Space Science Institute, 4750 Walnut Street, Boulder, CO 80301 (United States); Stutz, A. M. [Max-Planck-Institut für Astronomie, Königstuhl 17, D-69117 Heidelberg (Germany); Stanke, T. [ESO, Karl-Schwarzschild-Strasse 2, D-85748 Garching bei München (Germany); Tobin, J. J. [National Radio Astronomy Observatory, Charlottesville, VA 22903 (United States); Megeath, S. T.; Booker, J. [Ritter Astrophysical Research Center, Department of Physics and Astronomy, University of Toledo, 2801 W. Bancroft Street, Toledo, OH 43606 (United States); Osorio, M. [Instituto de Astrofísica de Andalucía, CSIC, Camino Bajo de Huétor 50, E-18008 Granada (Spain); Hartmann, L.; Calvet, N. [Department of Astronomy, University of Michigan, 500 Church Street, Ann Arbor, MI 48109 (United States); Poteet, C. A. [New York Center for Astrobiology, Rensselaer Polytechnic Institute, 110 Eighth Street, Troy, NY 12180 (United States); Manoj, P. [Department of Astronomy and Astrophysics, Tata Institute of Fundamental Research, Homi Bhabha Road, Colaba, Mumbai 400005 (India); Watson, D. M. [Department of Physics and Astronomy, University of Rochester, Rochester, NY 14627 (United States); Allen, L., E-mail: furlan@ipac.caltech.edu [National Optical Astronomy Observatory, 950 N. Cherry Avenue, Tucson, AZ 85719 (United States)

    2016-05-01

    We present key results from the Herschel Orion Protostar Survey: spectral energy distributions (SEDs) and model fits of 330 young stellar objects, predominantly protostars, in the Orion molecular clouds. This is the largest sample of protostars studied in a single, nearby star formation complex. With near-infrared photometry from 2MASS, mid- and far-infrared data from Spitzer and Herschel , and submillimeter photometry from APEX, our SEDs cover 1.2–870 μ m and sample the peak of the protostellar envelope emission at ∼100 μ m. Using mid-IR spectral indices and bolometric temperatures, we classify our sample into 92 Class 0 protostars, 125 Class I protostars, 102 flat-spectrum sources, and 11 Class II pre-main-sequence stars. We implement a simple protostellar model (including a disk in an infalling envelope with outflow cavities) to generate a grid of 30,400 model SEDs and use it to determine the best-fit model parameters for each protostar. We argue that far-IR data are essential for accurate constraints on protostellar envelope properties. We find that most protostars, and in particular the flat-spectrum sources, are well fit. The median envelope density and median inclination angle decrease from Class 0 to Class I to flat-spectrum protostars, despite the broad range in best-fit parameters in each of the three categories. We also discuss degeneracies in our model parameters. Our results confirm that the different protostellar classes generally correspond to an evolutionary sequence with a decreasing envelope infall rate, but the inclination angle also plays a role in the appearance, and thus interpretation, of the SEDs.

  9. A model based estimate of the geometrical acceptance of the e+e- experiment on the HYPERON spectrometer

    International Nuclear Information System (INIS)

    Cerny, V.

    1983-01-01

    A model based estimate is presented of the geometrical acceptance of the HYPERON spectrometer for the detection of the e + e - pairs in the proposed lepton experiment. The results of the Monte Carlo calculation show that the expected acceptance is fairly high. (author)

  10. Brain MRI Tumor Detection using Active Contour Model and Local Image Fitting Energy

    Science.gov (United States)

    Nabizadeh, Nooshin; John, Nigel

    2014-03-01

    Automatic abnormality detection in Magnetic Resonance Imaging (MRI) is an important issue in many diagnostic and therapeutic applications. Here an automatic brain tumor detection method is introduced that uses T1-weighted images and K. Zhang et. al.'s active contour model driven by local image fitting (LIF) energy. Local image fitting energy obtains the local image information, which enables the algorithm to segment images with intensity inhomogeneities. Advantage of this method is that the LIF energy functional has less computational complexity than the local binary fitting (LBF) energy functional; moreover, it maintains the sub-pixel accuracy and boundary regularization properties. In Zhang's algorithm, a new level set method based on Gaussian filtering is used to implement the variational formulation, which is not only vigorous to prevent the energy functional from being trapped into local minimum, but also effective in keeping the level set function regular. Experiments show that the proposed method achieves high accuracy brain tumor segmentation results.

  11. Anticipating mismatches of HIT investments: Developing a viability-fit model for e-health services.

    Science.gov (United States)

    Mettler, Tobias

    2016-01-01

    Albeit massive investments in the recent years, the impact of health information technology (HIT) has been controversial and strongly disputed by both research and practice. While many studies are concerned with the development of new or the refinement of existing measurement models for assessing the impact of HIT adoption (ex post), this study presents an initial attempt to better understand the factors affecting viability and fit of HIT and thereby underscores the importance of also having instruments for managing expectations (ex ante). We extend prior research by undertaking a more granular investigation into the theoretical assumptions of viability and fit constructs. In doing so, we use a mixed-methods approach, conducting qualitative focus group discussions and a quantitative field study to improve and validate a viability-fit measurement instrument. Our findings suggest two issues for research and practice. First, the results indicate that different stakeholders perceive HIT viability and fit of the same e-health services very unequally. Second, the analysis also demonstrates that there can be a great discrepancy between the organizational viability and individual fit of a particular e-health service. The findings of this study have a number of important implications such as for health policy making, HIT portfolios, and stakeholder communication. Copyright © 2015. Published by Elsevier Ireland Ltd.

  12. Factors that influence the acceptance of telemetry by emergency medical technicians in ambulances: an application of the extended technology acceptance model.

    Science.gov (United States)

    Hwang, Ji Young; Kim, Ki Young; Lee, Kang Hyun

    2014-12-01

    The aim of the study was to verify the effects of patient factors perceived by emergency medical technicians (EMTs) as well as their social and organizational factors on prehospital telemetry use intention based on the technology use intention and elaboration likelihood models. This is a retrospective empirical study. Questionnaires were developed on the basis of clinical factors of 72,907 patients assessed by prehospital telemetry from January 1, 2009 to April 30, 2012 by reviewing their prehospital medical care records and in-hospital medical records. Questionnaires regarding the social and organizational factors of EMTs were created on the basis of a literature review. To verify which factors affect the utilization of telemetry, we developed a partial least-squares route model on the basis of each characteristic. In total, 136 EMTs who had experience in using prehospital telemetry were surveyed from April 1 to April 7, 2013. Reliability, validity, hypotheses, and the model goodness of fit of the study tools were tested. The clinical factors of the patients (path coefficient=-0.12; t=2.38), subjective norm (path coefficient=0.18; t=2.63), and job fit (path coefficient=0.45; t=5.29) positively affected the perceived usefulness (p<0.010). Meanwhile, the clinical factors of the patients (path coefficients=-0.19; t=4.46), subjective norm (path coefficient=0.08; t=1.97), loyalty incentives (path coefficient=-0.17; t=3.83), job fit (path coefficient=-0.32; t=7.06), organizational facilitations (path coefficient=0.08; t=1.99), and technical factors (i.e., usefulness and ease of use) positively affected attitudes (path coefficient=0.10, 0.58; t=2.62, 5.81; p<0.010). Attitudes and perceived usefulness significantly positively affected use intention. Factors that influence the use of telemetry by EMTs in ambulances included patients' clinical factors, as well as complex organizational and environmental factors surrounding the EMTs' occupational environments. This suggests

  13. Amino acids intake and physical fitness among adolescents.

    Science.gov (United States)

    Gracia-Marco, Luis; Bel-Serrat, Silvia; Cuenca-Garcia, Magdalena; Gonzalez-Gross, Marcela; Pedrero-Chamizo, Raquel; Manios, Yannis; Marcos, Ascensión; Molnar, Denes; Widhalm, Kurt; Polito, Angela; Vanhelst, Jeremy; Hagströmer, Maria; Sjöström, Michael; Kafatos, Anthony; de Henauw, Stefaan; Gutierrez, Ángel; Castillo, Manuel J; Moreno, Luis A

    2017-06-01

    The aim was to investigate whether there was an association between amino acid (AA) intake and physical fitness and if so, to assess whether this association was independent of carbohydrates intake. European adolescents (n = 1481, 12.5-17.5 years) were measured. Intake was assessed via two non-consecutive 24-h dietary recalls. Lower and upper limbs muscular fitness was assessed by standing long jump and handgrip strength tests, respectively. Cardiorespiratory fitness was assessed by the 20-m shuttle run test. Physical activity was objectively measured. Socioeconomic status was obtained via questionnaires. Lower limbs muscular fitness seems to be positively associated with tryptophan, histidine and methionine intake in boys, regardless of centre, age, socioeconomic status, physical activity and total energy intake (model 1). However, these associations disappeared once carbohydrates intake was controlled for (model 2). In girls, only proline intake seems to be positively associated with lower limbs muscular fitness (model 2) while cardiorespiratory fitness seems to be positively associated with leucine (model 1) and proline intake (models 1 and 2). None of the observed significant associations remained significant once multiple testing was controlled for. In conclusion, we failed to detect any associations between any of the evaluated AAs and physical fitness after taking into account the effect of multiple testing.

  14. Extended TAM Model: Impacts of Convenience on Acceptance and Use of Moodle

    Science.gov (United States)

    Hsu, Hsiao-hui; Chang, Yu-ying

    2013-01-01

    The increasing online access to courses, programs, and information has shifted the control and responsibility of learning process from instructors to learners. Learners' perceptions of and attitudes toward e-learning constitute a critical factor to the success of such system. The purpose of this study is to take TAM (technology acceptance model)…

  15. Predicting Public Bicycle Adoption Using the Technology Acceptance Model

    Directory of Open Access Journals (Sweden)

    Benjamin T. Hazen

    2015-10-01

    Full Text Available Bicycle sharing programs provide a sustainable mode of urban transportation. Although cities across the globe have developed these systems for their citizens and visitors, usage rates are not as high as anticipated. This research uses the technology acceptance model as the basis to understand one’s intention to adopt bicycle sharing programs. Using survey data derived from 421 participants in Beijing, China, the proposed covariance-based structural equation model consisting of perceived quality, perceived convenience, and perceived value is found to predict 50.5% of the variance in adoption intention. The findings of this research contribute to theory and practice in the burgeoning literature on public bicycle systems and sustainable urban transportation by offering a theoretical lens through which to consider system adoption, and providing information to practitioners as to what factors might contribute most to adoption.

  16. Fitting the two-compartment model in DCE-MRI by linear inversion.

    Science.gov (United States)

    Flouri, Dimitra; Lesnic, Daniel; Sourbron, Steven P

    2016-09-01

    Model fitting of dynamic contrast-enhanced-magnetic resonance imaging-MRI data with nonlinear least squares (NLLS) methods is slow and may be biased by the choice of initial values. The aim of this study was to develop and evaluate a linear least squares (LLS) method to fit the two-compartment exchange and -filtration models. A second-order linear differential equation for the measured concentrations was derived where model parameters act as coefficients. Simulations of normal and pathological data were performed to determine calculation time, accuracy and precision under different noise levels and temporal resolutions. Performance of the LLS was evaluated by comparison against the NLLS. The LLS method is about 200 times faster, which reduces the calculation times for a 256 × 256 MR slice from 9 min to 3 s. For ideal data with low noise and high temporal resolution the LLS and NLLS were equally accurate and precise. The LLS was more accurate and precise than the NLLS at low temporal resolution, but less accurate at high noise levels. The data show that the LLS leads to a significant reduction in calculation times, and more reliable results at low noise levels. At higher noise levels the LLS becomes exceedingly inaccurate compared to the NLLS, but this may be improved using a suitable weighting strategy. Magn Reson Med 76:998-1006, 2016. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

  17. The regression-calibration method for fitting generalized linear models with additive measurement error

    OpenAIRE

    James W. Hardin; Henrik Schmeidiche; Raymond J. Carroll

    2003-01-01

    This paper discusses and illustrates the method of regression calibration. This is a straightforward technique for fitting models with additive measurement error. We present this discussion in terms of generalized linear models (GLMs) following the notation defined in Hardin and Carroll (2003). Discussion will include specified measurement error, measurement error estimated by replicate error-prone proxies, and measurement error estimated by instrumental variables. The discussion focuses on s...

  18. Prevalence of elevated mean arterial pressure and how fitness moderates its association with BMI in youth.

    Science.gov (United States)

    Ogunleye, Ayodele A; Sandercock, Gavin R; Voss, Christine; Eisenmann, Joey C; Reed, Katharine

    2013-11-01

    Cardiorespiratory fitness is known to be cardioprotective and its association with the components of the metabolic syndrome in children is becoming clearer. The aim of the present study was to examine the extent to which cardiorespiratory fitness may offset the weight-related association with mean arterial pressure (MAP) in schoolchildren. Cross-sectional study. Schoolchildren from the East of England, U.K. A total of 5983 (48% females) schoolchildren, 10 to 16 years of age, had height, weight and blood pressure measured by standard procedures and cardiorespiratory fitness assessed by the 20 m shuttle-run test. Participants were classified as fit or unfit using internationally accepted fitness cut-off points; and as normal weight, overweight or obese based on BMI, again using international cut-off points. Age-adjusted ANCOVA was used to determine the main effects and interaction of fitness and BMI on MAP Z-score. Logistic regression models were used to estimate odds ratios of elevated MAP. Prevalence of elevated MAP in schoolchildren was 14.8% overall and 35.7% in those who were obese-unfit. Approximately 21% of participants were overweight and 5% obese, while 23% were classified as unfit. MAP generally increased across BMI categories and was higher in the aerobically unfit participants. Obese-fit males had lower MAP compared with obese-unfit males (P < 0.001); this trend was similar in females (P = 0.05). Increasing fitness level may have a positive impact on the weight-related elevations of MAP seen in obese and overweight schoolchildren.

  19. Multivariate rational data fitting

    Science.gov (United States)

    Cuyt, Annie; Verdonk, Brigitte

    1992-12-01

    Sections 1 and 2 discuss the advantages of an object-oriented implementation combined with higher floating-point arithmetic, of the algorithms available for multivariate data fitting using rational functions. Section 1 will in particular explain what we mean by "higher arithmetic". Section 2 will concentrate on the concepts of "object orientation". In sections 3 and 4 we shall describe the generality of the data structure that can be dealt with: due to some new results virtually every data set is acceptable right now, with possible coalescence of coordinates or points. In order to solve the multivariate rational interpolation problem the data sets are fed to different algorithms depending on the structure of the interpolation points in then-variate space.

  20. An Introduction to Goodness of Fit for PMU Parameter Estimation

    Energy Technology Data Exchange (ETDEWEB)

    Riepnieks, Artis; Kirkham, Harold

    2017-10-01

    New results of measurements of phasor-like signals are presented based on our previous work on the topic. In this document an improved estimation method is described. The algorithm (which is realized in MATLAB software) is discussed. We examine the effect of noisy and distorted signals on the Goodness of Fit metric. The estimation method is shown to be performing very well with clean data and with a measurement window as short as a half a cycle and as few as 5 samples per cycle. The Goodness of Fit decreases predictably with added phase noise, and seems to be acceptable even with visible distortion in the signal. While the exact results we obtain are specific to our method of estimation, the Goodness of Fit method could be implemented in any phasor measurement unit.

  1. Applying the Extended Technology Acceptance Model to the Use of Clickers in Student Learning: Some Evidence from Macroeconomics Classes

    Science.gov (United States)

    Wu, Xiaoyu; Gao, Yuan

    2011-01-01

    This paper applies the extended technology acceptance model (exTAM) in information systems research to the use of clickers in student learning. The technology acceptance model (TAM) posits that perceived ease of use and perceived usefulness of technology influence users' attitudes toward using and intention to use technology. Research subsequent…

  2. Econometric modelling of risk adverse behaviours of entrepreneurs in the provision of house fittings in China

    Directory of Open Access Journals (Sweden)

    Rita Yi Man Li

    2012-03-01

    Full Text Available Entrepreneurs have always born the risk of running their business. They reap a profit in return for their risk taking and work. Housing developers are no different. In many countries, such as Australia, the United Kingdom and the United States, they interpret the tastes of the buyers and provide the dwellings they develop with basic fittings such as floor and wall coverings, bathroom fittings and kitchen cupboards. In mainland China, however, in most of the developments, units or houses are sold without floor or wall coverings, kitchen  or bathroom fittings. What is the motive behind this choice? This paper analyses the factors affecting housing developers’ decisions to provide fittings based on 1701 housing developments in Hangzhou, Chongqing and Hangzhou using a Probit model. The results show that developers build a higher proportion of bare units in mainland China when: 1 there is shortage of housing; 2 land costs are high so that the comparative costs of providing fittings become relatively low.

  3. FIREFLY (Fitting IteRativEly For Likelihood analYsis): a full spectral fitting code

    Science.gov (United States)

    Wilkinson, David M.; Maraston, Claudia; Goddard, Daniel; Thomas, Daniel; Parikh, Taniya

    2017-12-01

    We present a new spectral fitting code, FIREFLY, for deriving the stellar population properties of stellar systems. FIREFLY is a chi-squared minimization fitting code that fits combinations of single-burst stellar population models to spectroscopic data, following an iterative best-fitting process controlled by the Bayesian information criterion. No priors are applied, rather all solutions within a statistical cut are retained with their weight. Moreover, no additive or multiplicative polynomials are employed to adjust the spectral shape. This fitting freedom is envisaged in order to map out the effect of intrinsic spectral energy distribution degeneracies, such as age, metallicity, dust reddening on galaxy properties, and to quantify the effect of varying input model components on such properties. Dust attenuation is included using a new procedure, which was tested on Integral Field Spectroscopic data in a previous paper. The fitting method is extensively tested with a comprehensive suite of mock galaxies, real galaxies from the Sloan Digital Sky Survey and Milky Way globular clusters. We also assess the robustness of the derived properties as a function of signal-to-noise ratio (S/N) and adopted wavelength range. We show that FIREFLY is able to recover age, metallicity, stellar mass, and even the star formation history remarkably well down to an S/N ∼ 5, for moderately dusty systems. Code and results are publicly available.1

  4. FITTING OF PARAMETRIC BUILDING MODELS TO OBLIQUE AERIAL IMAGES

    Directory of Open Access Journals (Sweden)

    U. S. Panday

    2012-09-01

    Full Text Available In literature and in photogrammetric workstations many approaches and systems to automatically reconstruct buildings from remote sensing data are described and available. Those building models are being used for instance in city modeling or in cadastre context. If a roof overhang is present, the building walls cannot be estimated correctly from nadir-view aerial images or airborne laser scanning (ALS data. This leads to inconsistent building outlines, which has a negative influence on visual impression, but more seriously also represents a wrong legal boundary in the cadaster. Oblique aerial images as opposed to nadir-view images reveal greater detail, enabling to see different views of an object taken from different directions. Building walls are visible from oblique images directly and those images are used for automated roof overhang estimation in this research. A fitting algorithm is employed to find roof parameters of simple buildings. It uses a least squares algorithm to fit projected wire frames to their corresponding edge lines extracted from the images. Self-occlusion is detected based on intersection result of viewing ray and the planes formed by the building whereas occlusion from other objects is detected using an ALS point cloud. Overhang and ground height are obtained by sweeping vertical and horizontal planes respectively. Experimental results are verified with high resolution ortho-images, field survey, and ALS data. Planimetric accuracy of 1cm mean and 5cm standard deviation was obtained, while buildings' orientation were accurate to mean of 0.23° and standard deviation of 0.96° with ortho-image. Overhang parameters were aligned to approximately 10cm with field survey. The ground and roof heights were accurate to mean of – 9cm and 8cm with standard deviations of 16cm and 8cm with ALS respectively. The developed approach reconstructs 3D building models well in cases of sufficient texture. More images should be acquired for

  5. An Evaluation of GeoBEST Contingency Beddown Planning Software Using the Technology Acceptance Model

    National Research Council Canada - National Science Library

    Jensen, Shawn

    2002-01-01

    .... The Technology Acceptance Model (TAM) was applied, which measures a prospective user's perceptions of the technology's usefulness and ease-of-use and predicts their intentions to use the software in the future...

  6. Fitting the Probability Distribution Functions to Model Particulate Matter Concentrations

    International Nuclear Information System (INIS)

    El-Shanshoury, Gh.I.

    2017-01-01

    The main objective of this study is to identify the best probability distribution and the plotting position formula for modeling the concentrations of Total Suspended Particles (TSP) as well as the Particulate Matter with an aerodynamic diameter<10 μm (PM 10 ). The best distribution provides the estimated probabilities that exceed the threshold limit given by the Egyptian Air Quality Limit value (EAQLV) as well the number of exceedance days is estimated. The standard limits of the EAQLV for TSP and PM 10 concentrations are 24-h average of 230 μg/m 3 and 70 μg/m 3 , respectively. Five frequency distribution functions with seven formula of plotting positions (empirical cumulative distribution functions) are compared to fit the average of daily TSP and PM 10 concentrations in year 2014 for Ain Sokhna city. The Quantile-Quantile plot (Q-Q plot) is used as a method for assessing how closely a data set fits a particular distribution. A proper probability distribution that represents the TSP and PM 10 has been chosen based on the statistical performance indicator values. The results show that Hosking and Wallis plotting position combined with Frechet distribution gave the highest fit for TSP and PM 10 concentrations. Burr distribution with the same plotting position follows Frechet distribution. The exceedance probability and days over the EAQLV are predicted using Frechet distribution. In 2014, the exceedance probability and days for TSP concentrations are 0.052 and 19 days, respectively. Furthermore, the PM 10 concentration is found to exceed the threshold limit by 174 days

  7. Social trust, risk perceptions and public acceptance of recycled water: testing a social-psychological model.

    Science.gov (United States)

    Ross, Victoria L; Fielding, Kelly S; Louis, Winnifred R

    2014-05-01

    Faced with a severe drought, the residents of the regional city of Toowoomba, in South East Queensland, Australia were asked to consider a potable wastewater reuse scheme to supplement drinking water supplies. As public risk perceptions and trust have been shown to be key factors in acceptance of potable reuse projects, this research developed and tested a social-psychological model of trust, risk perceptions and acceptance. Participants (N = 380) were surveyed a few weeks before a referendum was held in which residents voted against the controversial scheme. Analysis using structural equation modelling showed that the more community members perceived that the water authority used fair procedures (e.g., consulting with the community and providing accurate information), the greater their sense of shared identity with the water authority. Shared social identity in turn influenced trust via increased source credibility, that is, perceptions that the water authority is competent and has the community's interest at heart. The findings also support past research showing that higher levels of trust in the water authority were associated with lower perceptions of risk, which in turn were associated with higher levels of acceptance, and vice versa. The findings have a practical application for improving public acceptance of potable recycled water schemes. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Using geometry to improve model fitting and experiment design for glacial isostasy

    Science.gov (United States)

    Kachuck, S. B.; Cathles, L. M.

    2017-12-01

    As scientists we routinely deal with models, which are geometric objects at their core - the manifestation of a set of parameters as predictions for comparison with observations. When the number of observations exceeds the number of parameters, the model is a hypersurface (the model manifold) in the space of all possible predictions. The object of parameter fitting is to find the parameters corresponding to the point on the model manifold as close to the vector of observations as possible. But the geometry of the model manifold can make this difficult. By curving, ending abruptly (where, for instance, parameters go to zero or infinity), and by stretching and compressing the parameters together in unexpected directions, it can be difficult to design algorithms that efficiently adjust the parameters. Even at the optimal point on the model manifold, parameters might not be individually resolved well enough to be applied to new contexts. In our context of glacial isostatic adjustment, models of sparse surface observations have a broad spread of sensitivity to mixtures of the earth's viscous structure and the surface distribution of ice over the last glacial cycle. This impedes precise statements about crucial geophysical processes, such as the planet's thermal history or the climates that controlled the ice age. We employ geometric methods developed in the field of systems biology to improve the efficiency of fitting (geodesic accelerated Levenberg-Marquardt) and to identify the maximally informative sources of additional data to make better predictions of sea levels and ice configurations (optimal experiment design). We demonstrate this in particular in reconstructions of the Barents Sea Ice Sheet, where we show that only certain kinds of data from the central Barents have the power to distinguish between proposed models.

  9. vFitness: a web-based computing tool for improving estimation of in vitro HIV-1 fitness experiments

    Directory of Open Access Journals (Sweden)

    Demeter Lisa

    2010-05-01

    Full Text Available Abstract Background The replication rate (or fitness between viral variants has been investigated in vivo and in vitro for human immunodeficiency virus (HIV. HIV fitness plays an important role in the development and persistence of drug resistance. The accurate estimation of viral fitness relies on complicated computations based on statistical methods. This calls for tools that are easy to access and intuitive to use for various experiments of viral fitness. Results Based on a mathematical model and several statistical methods (least-squares approach and measurement error models, a Web-based computing tool has been developed for improving estimation of virus fitness in growth competition assays of human immunodeficiency virus type 1 (HIV-1. Conclusions Unlike the two-point calculation used in previous studies, the estimation here uses linear regression methods with all observed data in the competition experiment to more accurately estimate relative viral fitness parameters. The dilution factor is introduced for making the computational tool more flexible to accommodate various experimental conditions. This Web-based tool is implemented in C# language with Microsoft ASP.NET, and is publicly available on the Web at http://bis.urmc.rochester.edu/vFitness/.

  10. Fitted Hanbury-Brown Twiss radii versus space-time variances in flow-dominated models

    Science.gov (United States)

    Frodermann, Evan; Heinz, Ulrich; Lisa, Michael Annan

    2006-04-01

    The inability of otherwise successful dynamical models to reproduce the Hanbury-Brown Twiss (HBT) radii extracted from two-particle correlations measured at the Relativistic Heavy Ion Collider (RHIC) is known as the RHIC HBT Puzzle. Most comparisons between models and experiment exploit the fact that for Gaussian sources the HBT radii agree with certain combinations of the space-time widths of the source that can be directly computed from the emission function without having to evaluate, at significant expense, the two-particle correlation function. We here study the validity of this approach for realistic emission function models, some of which exhibit significant deviations from simple Gaussian behavior. By Fourier transforming the emission function, we compute the two-particle correlation function, and fit it with a Gaussian to partially mimic the procedure used for measured correlation functions. We describe a novel algorithm to perform this Gaussian fit analytically. We find that for realistic hydrodynamic models the HBT radii extracted from this procedure agree better with the data than the values previously extracted from the space-time widths of the emission function. Although serious discrepancies between the calculated and the measured HBT radii remain, we show that a more apples-to-apples comparison of models with data can play an important role in any eventually successful theoretical description of RHIC HBT data.

  11. Fitted Hanbury-Brown-Twiss radii versus space-time variances in flow-dominated models

    International Nuclear Information System (INIS)

    Frodermann, Evan; Heinz, Ulrich; Lisa, Michael Annan

    2006-01-01

    The inability of otherwise successful dynamical models to reproduce the Hanbury-Brown-Twiss (HBT) radii extracted from two-particle correlations measured at the Relativistic Heavy Ion Collider (RHIC) is known as the RHIC HBT Puzzle. Most comparisons between models and experiment exploit the fact that for Gaussian sources the HBT radii agree with certain combinations of the space-time widths of the source that can be directly computed from the emission function without having to evaluate, at significant expense, the two-particle correlation function. We here study the validity of this approach for realistic emission function models, some of which exhibit significant deviations from simple Gaussian behavior. By Fourier transforming the emission function, we compute the two-particle correlation function, and fit it with a Gaussian to partially mimic the procedure used for measured correlation functions. We describe a novel algorithm to perform this Gaussian fit analytically. We find that for realistic hydrodynamic models the HBT radii extracted from this procedure agree better with the data than the values previously extracted from the space-time widths of the emission function. Although serious discrepancies between the calculated and the measured HBT radii remain, we show that a more apples-to-apples comparison of models with data can play an important role in any eventually successful theoretical description of RHIC HBT data

  12. Worm plot to diagnose fit in quantile regression

    NARCIS (Netherlands)

    Buuren, S. van

    2007-01-01

    The worm plot is a series of detrended Q-Q plots, split by covariate levels. The worm plot is a diagnostic tool for visualizing how well a statistical model fits the data, for finding locations at which the fit can be improved, and for comparing the fit of different models. This paper shows how the

  13. Worm plot to diagnose fit in quantile regression

    NARCIS (Netherlands)

    Buuren, S. van

    2007-01-01

    The worm plot is a series of detrended Q-Q plots, split by covariate levels. The worm plot is a diagnostic tool for visualizing how well a statistical model fits the data, for finding locations at which the fit can be improved, and for comparing the fit of different models. This paper shows how

  14. Development and Analysis of Volume Multi-Sphere Method Model Generation using Electric Field Fitting

    Science.gov (United States)

    Ingram, G. J.

    Electrostatic modeling of spacecraft has wide-reaching applications such as detumbling space debris in the Geosynchronous Earth Orbit regime before docking, servicing and tugging space debris to graveyard orbits, and Lorentz augmented orbits. The viability of electrostatic actuation control applications relies on faster-than-realtime characterization of the electrostatic interaction. The Volume Multi-Sphere Method (VMSM) seeks the optimal placement and radii of a small number of equipotential spheres to accurately model the electrostatic force and torque on a conducting space object. Current VMSM models tuned using force and torque comparisons with commercially available finite element software are subject to the modeled probe size and numerical errors of the software. This work first investigates fitting of VMSM models to Surface-MSM (SMSM) generated electrical field data, removing modeling dependence on probe geometry while significantly increasing performance and speed. A proposed electric field matching cost function is compared to a force and torque cost function, the inclusion of a self-capacitance constraint is explored and 4 degree-of-freedom VMSM models generated using electric field matching are investigated. The resulting E-field based VMSM development framework is illustrated on a box-shaped hub with a single solar panel, and convergence properties of select models are qualitatively analyzed. Despite the complex non-symmetric spacecraft geometry, elegantly simple 2-sphere VMSM solutions provide force and torque fits within a few percent.

  15. Prediction of Pressing Quality for Press-Fit Assembly Based on Press-Fit Curve and Maximum Press-Mounting Force

    Directory of Open Access Journals (Sweden)

    Bo You

    2015-01-01

    Full Text Available In order to predict pressing quality of precision press-fit assembly, press-fit curves and maximum press-mounting force of press-fit assemblies were investigated by finite element analysis (FEA. The analysis was based on a 3D Solidworks model using the real dimensions of the microparts and the subsequent FEA model that was built using ANSYS Workbench. The press-fit process could thus be simulated on the basis of static structure analysis. To verify the FEA results, experiments were carried out using a press-mounting apparatus. The results show that the press-fit curves obtained by FEA agree closely with the curves obtained using the experimental method. In addition, the maximum press-mounting force calculated by FEA agrees with that obtained by the experimental method, with the maximum deviation being 4.6%, a value that can be tolerated. The comparison shows that the press-fit curve and max press-mounting force calculated by FEA can be used for predicting the pressing quality during precision press-fit assembly.

  16. Direct fit of a theoretical model of phase transition in oscillatory finger motions.

    NARCIS (Netherlands)

    Newell, K.M.; Molenaar, P.C.M.

    2003-01-01

    This paper presents a general method to fit the Schoner-Haken-Kelso (SHK) model of human movement phase transitions directly to time series data. A robust variant of the extended Kalman filter technique is applied to the data of a single subject. The options of covariance resetting and iteration

  17. Evaluation of teledermatology adoption by health-care professionals using a modified Technology Acceptance Model.

    Science.gov (United States)

    Orruño, Estibalitz; Gagnon, Marie Pierre; Asua, José; Ben Abdeljelil, Anis

    2011-01-01

    We examined the main factors affecting the intention of physicians to use teledermatology using a modified Technology Acceptance Model (TAM). The investigation was carried out during a teledermatology pilot study conducted in Spain. A total of 276 questionnaires were sent to physicians by email and 171 responded (62%). Cronbach's alpha was acceptably high for all constructs. Theoretical variables were well correlated with each other and with the dependent variable (Intention to Use). Logistic regression indicated that the original TAM model was good at predicting physicians' intention to use teledermatology and that the variables Perceived Usefulness and Perceived Ease of Use were both significant (odds ratios of 8.4 and 7.4, respectively). When other theoretical variables were added, the model was still significant and it also became more powerful. However, the only significant predictor in the modified model was Facilitators with an odds ratio of 9.9. Thus the TAM was good at predicting physicians' intention to use teledermatology. However, the most important variable was the perception of Facilitators to using the technology (e.g. infrastructure, training and support).

  18. Complex growing networks with intrinsic vertex fitness

    International Nuclear Information System (INIS)

    Bedogne, C.; Rodgers, G. J.

    2006-01-01

    One of the major questions in complex network research is to identify the range of mechanisms by which a complex network can self organize into a scale-free state. In this paper we investigate the interplay between a fitness linking mechanism and both random and preferential attachment. In our models, each vertex is assigned a fitness x, drawn from a probability distribution ρ(x). In Model A, at each time step a vertex is added and joined to an existing vertex, selected at random, with probability p and an edge is introduced between vertices with fitnesses x and y, with a rate f(x,y), with probability 1-p. Model B differs from Model A in that, with probability p, edges are added with preferential attachment rather than randomly. The analysis of Model A shows that, for every fixed fitness x, the network's degree distribution decays exponentially. In Model B we recover instead a power-law degree distribution whose exponent depends only on p, and we show how this result can be generalized. The properties of a number of particular networks are examined

  19. Parental modelling and prompting effects on acceptance of a novel fruit in 2-4-year-old children are dependent on children's food responsiveness.

    Science.gov (United States)

    Blissett, Jackie; Bennett, Carmel; Fogel, Anna; Harris, Gillian; Higgs, Suzanne

    2016-02-14

    Few children consume the recommended portions of fruit or vegetables. This study examined the effects of parental physical prompting and parental modelling in children's acceptance of a novel fruit (NF) and examined the role of children's food-approach and food-avoidance traits on NF engagement and consumption. A total of 120 caregiver-child dyads (fifty-four girls, sixty-six boys) participated in this study. Dyads were allocated to one of the following three conditions: physical prompting but no modelling, physical prompting and modelling or a modelling only control condition. Dyads ate a standardised meal containing a portion of a fruit new to the child. Parents completed measures of children's food approach and avoidance. Willingness to try the NF was observed, and the amount of the NF consumed was measured. Physical prompting but no modelling resulted in greater physical refusal of the NF. There were main effects of enjoyment of food and food fussiness on acceptance. Food responsiveness interacted with condition such that children who were more food responsive had greater NF acceptance in the prompting and modelling conditions in comparison with the modelling only condition. In contrast, children with low food responsiveness had greater acceptance in the modelling control condition than in the prompting but no modelling condition. Physical prompting in the absence of modelling is likely to be detrimental to NF acceptance. Parental use of physical prompting strategies, in combination with modelling of NF intake, may facilitate acceptance of NF, but only in food-responsive children. Modelling consumption best promotes acceptance in children with low food responsiveness.

  20. Model of acceptance of a new type of beverage: application to natural sparkling red wine

    Directory of Open Access Journals (Sweden)

    Cristina Olarte

    2017-04-01

    Full Text Available Wine is a traditional beverage with a saturated market, in which consumers are open to innovation. In this context, an innovative experience was launched to create a new natural sparkling red wine with a view to diversifying production and studying its acceptance. This paper uses an original acceptance model for new foods called the Cognitive-Affective-Normative (CAN model. The model was tested on a sample of 500 Spanish consumers in a real-world test context and explains 64.1% of the intention to consume the new wine.  The results showed the importance of the cognitive factor in consumer intention. In particular, sensory and price benefits were found to be the key criteria explaining the intention to consume (41.34%. The results also confirmed the usefulness of expanding the factors that determine new food acceptance to include the emotional and normative dimensions of consumer behaviour. The social norm (18.54% and affective factors (4.2% contributed to the explanation of the underlying reasons influencing consumers’ assessments of the product. It is proposed that efforts focus on new visual, olfactory and taste-related sensations with a view to producing an appetising product that offers good value for money. Research and development institutes should innovate towards products that highlight these sensations. Therefore, attention should be drawn to the importance of acting on potential consumers’ reference groups and membership groups, with a view to involving them in recommending the product. Managers should focus on measuring and influencing social opinion, working on marketing communication to achieve acceptance.

  1. Model of acceptance of a new type of beverage: application to natural sparkling red wine

    International Nuclear Information System (INIS)

    Olarte, C.; Pelegrín, J.; Reinares, E.

    2017-01-01

    Wine is a traditional beverage with a saturated market, in which consumers are open to innovation. In this context, an innovative experience was launched to create a new natural sparkling red wine with a view to diversifying production and studying its acceptance. This paper uses an original acceptance model for new foods called the Cognitive-Affective-Normative (CAN) model. The model was tested on a sample of 500 Spanish consumers in a real-world test context and explains 64.1% of the intention to consume the new wine. The results showed the importance of the cognitive factor in consumer intention. In particular, sensory and price benefits were found to be the key criteria explaining the intention to consume (41.34%). The results also confirmed the usefulness of expanding the factors that determine new food acceptance to include the emotional and normative dimensions of consumer behaviour. The social norm (18.54%) and affective factors (4.2%) contributed to the explanation of the underlying reasons influencing consumers’ assessments of the product. It is proposed that efforts focus on new visual, olfactory and taste-related sensations with a view to producing an appetising product that offers good value for money. Research and development institutes should innovate towards products that highlight these sensations. Therefore, attention should be drawn to the importance of acting on potential consumers’ reference groups and membership groups, with a view to involving them in recommending the product. Managers should focus on measuring and influencing social opinion, working on marketing communication to achieve acceptance.

  2. Model of acceptance of a new type of beverage: application to natural sparkling red wine

    Energy Technology Data Exchange (ETDEWEB)

    Olarte, C.; Pelegrín, J.; Reinares, E.

    2017-09-01

    Wine is a traditional beverage with a saturated market, in which consumers are open to innovation. In this context, an innovative experience was launched to create a new natural sparkling red wine with a view to diversifying production and studying its acceptance. This paper uses an original acceptance model for new foods called the Cognitive-Affective-Normative (CAN) model. The model was tested on a sample of 500 Spanish consumers in a real-world test context and explains 64.1% of the intention to consume the new wine. The results showed the importance of the cognitive factor in consumer intention. In particular, sensory and price benefits were found to be the key criteria explaining the intention to consume (41.34%). The results also confirmed the usefulness of expanding the factors that determine new food acceptance to include the emotional and normative dimensions of consumer behaviour. The social norm (18.54%) and affective factors (4.2%) contributed to the explanation of the underlying reasons influencing consumers’ assessments of the product. It is proposed that efforts focus on new visual, olfactory and taste-related sensations with a view to producing an appetising product that offers good value for money. Research and development institutes should innovate towards products that highlight these sensations. Therefore, attention should be drawn to the importance of acting on potential consumers’ reference groups and membership groups, with a view to involving them in recommending the product. Managers should focus on measuring and influencing social opinion, working on marketing communication to achieve acceptance.

  3. Summary goodness-of-fit statistics for binary generalized linear models with noncanonical link functions.

    Science.gov (United States)

    Canary, Jana D; Blizzard, Leigh; Barry, Ronald P; Hosmer, David W; Quinn, Stephen J

    2016-05-01

    Generalized linear models (GLM) with a canonical logit link function are the primary modeling technique used to relate a binary outcome to predictor variables. However, noncanonical links can offer more flexibility, producing convenient analytical quantities (e.g., probit GLMs in toxicology) and desired measures of effect (e.g., relative risk from log GLMs). Many summary goodness-of-fit (GOF) statistics exist for logistic GLM. Their properties make the development of GOF statistics relatively straightforward, but it can be more difficult under noncanonical links. Although GOF tests for logistic GLM with continuous covariates (GLMCC) have been applied to GLMCCs with log links, we know of no GOF tests in the literature specifically developed for GLMCCs that can be applied regardless of link function chosen. We generalize the Tsiatis GOF statistic originally developed for logistic GLMCCs, (TG), so that it can be applied under any link function. Further, we show that the algebraically related Hosmer-Lemeshow (HL) and Pigeon-Heyse (J(2) ) statistics can be applied directly. In a simulation study, TG, HL, and J(2) were used to evaluate the fit of probit, log-log, complementary log-log, and log models, all calculated with a common grouping method. The TG statistic consistently maintained Type I error rates, while those of HL and J(2) were often lower than expected if terms with little influence were included. Generally, the statistics had similar power to detect an incorrect model. An exception occurred when a log GLMCC was incorrectly fit to data generated from a logistic GLMCC. In this case, TG had more power than HL or J(2) . © 2015 John Wiley & Sons Ltd/London School of Economics.

  4. Measuring Quasar Spin via X-ray Continuum Fitting

    Science.gov (United States)

    Jenkins, Matthew; Pooley, David; Rappaport, Saul; Steiner, Jack

    2018-01-01

    We have identified several quasars whose X-ray spectra appear very soft. When fit with power-law models, the best-fit indices are greater than 3. This is very suggestive of thermal disk emission, indicating that the X-ray spectrum is dominated by the disk component. Galactic black hole binaries in such states have been successfully fit with disk-blackbody models to constrain the inner radius, which also constrains the spin of the black hole. We have fit those models to XMM-Newton spectra of several of our identified soft X-ray quasars to place constraints on the spins of the supermassive black holes.

  5. RATES OF FITNESS DECLINE AND REBOUND SUGGEST PERVASIVE EPISTASIS

    Science.gov (United States)

    Perfeito, L; Sousa, A; Bataillon, T; Gordo, I

    2014-01-01

    Unraveling the factors that determine the rate of adaptation is a major question in evolutionary biology. One key parameter is the effect of a new mutation on fitness, which invariably depends on the environment and genetic background. The fate of a mutation also depends on population size, which determines the amount of drift it will experience. Here, we manipulate both population size and genotype composition and follow adaptation of 23 distinct Escherichia coli genotypes. These have previously accumulated mutations under intense genetic drift and encompass a substantial fitness variation. A simple rule is uncovered: the net fitness change is negatively correlated with the fitness of the genotype in which new mutations appear—a signature of epistasis. We find that Fisher's geometrical model can account for the observed patterns of fitness change and infer the parameters of this model that best fit the data, using Approximate Bayesian Computation. We estimate a genomic mutation rate of 0.01 per generation for fitness altering mutations, albeit with a large confidence interval, a mean fitness effect of mutations of −0.01, and an effective number of traits nine in mutS− E. coli. This framework can be extended to confront a broader range of models with data and test different classes of fitness landscape models. PMID:24372601

  6. A Qualitative Case Study to Investigate the Technology Acceptance Experience Outlined in the TAM Using the Kubler-Ross Stages of Grieving and Acceptance

    Science.gov (United States)

    Sotelo, Benjamin Eladio

    2015-01-01

    The Technology Acceptance Model (TAM) has been an important model for the understanding of end user acceptance regarding technology and a framework used in thousands of researched scenarios since publication in 1986. Similarly, the Kubler-Ross model of death and dying has also been used as a model for the study of acceptance within the medical…

  7. Fitting model-based psychometric functions to simultaneity and temporal-order judgment data: MATLAB and R routines.

    Science.gov (United States)

    Alcalá-Quintana, Rocío; García-Pérez, Miguel A

    2013-12-01

    Research on temporal-order perception uses temporal-order judgment (TOJ) tasks or synchrony judgment (SJ) tasks in their binary SJ2 or ternary SJ3 variants. In all cases, two stimuli are presented with some temporal delay, and observers judge the order of presentation. Arbitrary psychometric functions are typically fitted to obtain performance measures such as sensitivity or the point of subjective simultaneity, but the parameters of these functions are uninterpretable. We describe routines in MATLAB and R that fit model-based functions whose parameters are interpretable in terms of the processes underlying temporal-order and simultaneity judgments and responses. These functions arise from an independent-channels model assuming arrival latencies with exponential distributions and a trichotomous decision space. Different routines fit data separately for SJ2, SJ3, and TOJ tasks, jointly for any two tasks, or also jointly for the three tasks (for common cases in which two or even the three tasks were used with the same stimuli and participants). Additional routines provide bootstrap p-values and confidence intervals for estimated parameters. A further routine is included that obtains performance measures from the fitted functions. An R package for Windows and source code of the MATLAB and R routines are available as Supplementary Files.

  8. A comparison of wearable fitness devices.

    Science.gov (United States)

    Kaewkannate, Kanitthika; Kim, Soochan

    2016-05-24

    Wearable trackers can help motivate you during workouts and provide information about your daily routine or fitness in combination with your smartphone without requiring potentially disruptive manual calculations or records. This paper summarizes and compares wearable fitness devices, also called "fitness trackers" or "activity trackers." These devices are becoming increasingly popular in personal healthcare, motivating people to exercise more throughout the day without the need for lifestyle changes. The various choices in the market for wearable devices are also increasing, with customers searching for products that best suit their personal needs. Further, using a wearable device or fitness tracker can help people reach a fitness goal or finish line. Generally, companies display advertising for these kinds of products and depict them as beneficial, user friendly, and accurate. However, there are no objective research results to prove the veracity of their words. This research features subjective and objective experimental results, which reveal that some devices perform better than others. The four most popular wristband style wearable devices currently on the market (Withings Pulse, Misfit Shine, Jawbone Up24, and Fitbit Flex) are selected and compared. The accuracy of fitness tracking is one of the key components for fitness tracking, and some devices perform better than others. This research shows subjective and objective experimental results that are used to compare the accuracy of four wearable devices in conjunction with user friendliness and satisfaction of 7 real users. In addition, this research matches the opinions between reviewers on an Internet site and those of subjects when using the device. Withings Pulse is the most friendly and satisfactory from the users' viewpoint. It is the most accurate and repeatable for step and distance tracking, which is the most important measurement of fitness tracking, followed by Fitbit Flex, Jawbone Up24, and Misfit

  9. A comparison of wearable fitness devices

    Directory of Open Access Journals (Sweden)

    Kanitthika Kaewkannate

    2016-05-01

    fitness tracking, followed by Fitbit Flex, Jawbone Up24, and Misfit Shine. In contrast, Misfit Shine has the highest score for design and hardware, which is also appreciated by users. Conclusions From the results of experiments on four wearable devices, it is determined that the most acceptable in terms of price and satisfaction levels is the Withings Pulse, followed by the Fitbit Flex, Jawbone Up24, and Misfit Shine.

  10. Fitness

    Science.gov (United States)

    ... gov home http://www.girlshealth.gov/ Home Fitness Fitness Want to look and feel your best? Physical ... are? Check out this info: What is physical fitness? top Physical fitness means you can do everyday ...

  11. Acceptance and Usability of OER in India: An Investigation Using UTAUT Model

    Directory of Open Access Journals (Sweden)

    Nayantara Padhi

    2018-02-01

    Full Text Available In the global movement towards open knowledge society, open educational resources (OER have become a prominent contributor as a medium of education, research and training. In India, the phenomenon of OER is still in nascent stage. Although the country has been massively investing on growth and usage of ICT, it still requires acceptance of OER as a medium of education, research or training. Particularly, adoption and usage of OER posses several challenges such as accessibility, reliability, copy right etc. There is plethora of research studies on the ICT usage in education in India, but there is hardly any empirical research evidence on OER in India. With this backdrop, at the first instance it is very much essential to investigate the acceptance and usability of OER in India. This paper focuses on faculty perception by applying Unified Theory of Acceptance and Use of Technology (UTAUT model. Apart from this, the study also identifies the challenges associated with OER. For the purpose of this survey data is collected from 22 Indian universities located pan India. The outcome of this empirical research shall certainly useful and provide guidelines for the policy makers and users of OER in India.

  12. Smartphone apps to improve fitness and increase physical activity among young people: protocol of the Apps for IMproving FITness (AIMFIT) randomized controlled trial.

    Science.gov (United States)

    Direito, Artur; Jiang, Yannan; Whittaker, Robyn; Maddison, Ralph

    2015-07-11

    Physical activity is a modifiable behavior related to many preventable non-communicable diseases. There is an age-related decline in physical activity levels in young people, which tracks into adulthood. Common interactive technologies such as smartphones, particularly employing immersive features, may enhance the appeal and delivery of interventions to increase levels of physical activity in young people. The primary aim of the Apps for IMproving FITness (AIMFIT) trial is to evaluate the effectiveness of two popular "off-the-shelf" smartphone apps for improving cardiorespiratory fitness in young people. A three-arm, parallel, randomized controlled trial will be conducted in Auckland, New Zealand. Fifty-one eligible young people aged 14-17 years will be randomized to one of three conditions: 1) use of an immersive smartphone app, 2) use of a non-immersive app, or 3) usual behavior (control). Both smartphone apps consist of an eight-week training program designed to improve fitness and ability to run 5 km, however, the immersive app features a game-themed design and adds a narrative. Data are collected at baseline and 8 weeks. The primary outcome is cardiorespiratory fitness, assessed as time to complete the one mile run/walk test at 8 weeks. Secondary outcomes are physical activity levels, self-efficacy, enjoyment, psychological need satisfaction, and acceptability and usability of the apps. Analysis using intention to treat principles will be performed using regression models. Despite the proliferation of commercially available smartphone applications, there is a dearth of empirical evidence to support their effectiveness on the targeted health behavior. This pragmatic study will determine the effectiveness of two popular "off-the-shelf" apps as a stand-alone instrument for improving fitness and physical activity among young people. Adherence to app use will not be closely controlled; however, random allocation of participants, a heterogeneous group, and data

  13. A revised oceanographic model to calculate the limiting capacity of the ocean to accept radioactive waste

    International Nuclear Information System (INIS)

    Webb, G.A.M.; Grimwood, P.D.

    1976-12-01

    This report describes an oceanographic model which has been developed for the use in calculating the capacity of the oceans to accept radioactive wastes. One component is a relatively short-term diffusion model which is based on that described in an earlier report (Webb et al., NRPB-R14(1973)), but which has been generalised to some extent. Another component is a compartment model which is used to calculate long-term widespread water concentrations. This addition overcomes some of the short comings of the earlier diffusion model. Incorporation of radioactivity into deep ocean sediments is included in this long-term model as a removal mechanism. The combined model is used to provide a conservative (safe) estimate of the maximum concentrations of radioactivity in water as a function of time after the start of a continuous disposal operation. These results can then be used to assess the limiting capacity of an ocean to accept radioactive waste. (author)

  14. Offer acceptance practices and geographic variability in allocation model for end-stage liver disease at transplant.

    Science.gov (United States)

    Wey, Andrew; Pyke, Joshua; Schladt, David P; Gentry, Sommer E; Weaver, Tim; Salkowski, Nicholas; Kasiske, Bertram L; Israni, Ajay K; Snyder, Jon J

    2018-04-01

    Offer acceptance practices may cause geographic variability in allocation Model for End-Stage Liver Disease (aMELD) score at transplant and could magnify the effect of donor supply and demand on aMELD variability. To evaluate these issues, offer acceptance practices of liver transplant programs and donation service areas (DSAs) were estimated using offers of livers from donors recovered between January 1, 2016, and December 31, 2016. Offer acceptance practices were compared with liver yield, local placement of transplanted livers, donor supply and demand, and aMELD at transplant. Offer acceptance was associated with liver yield (odds ratio, 1.32; P offer acceptance (r = 0.09; P = 0.50). Additionally, the association between DSA-level donor-to-candidate ratios and aMELD at transplant did not change after adjustment for offer acceptance. The average squared difference in median aMELD at transplant across DSAs was 24.6; removing the effect of donor-to-candidate ratios reduced the average squared differences more than removing the effect of program-level offer acceptance (33% and 15% reduction, respectively). Offer acceptance practices and donor-to-candidate ratios independently contributed to geographic variability in aMELD at transplant. Thus, neither offer acceptance nor donor-to-candidate ratios can explain all of the geographic variability in aMELD at transplant. Liver Transplantation 24 478-487 2018 AASLD. © 2018 by the American Association for the Study of Liver Diseases.

  15. Determinants of IT-Related Innovation Acceptance and Use Behavior: Theoretical Integration of Unified Theory of Acceptance and Use of Technology and Entrepreneurial Potential Model

    Directory of Open Access Journals (Sweden)

    Sedigheh Moghavvemi

    2014-03-01

    Full Text Available Purpose – a great number of models investigate individual intention towards adopting and using information technology. However, the complex link between intention and behavior suggests that it may require more scrutiny (intention behavior gap. The link between the intention and behavior is most likely influenced by a number of factors, some controllable, others uncontrollable; therefore, external factors are likely to play a significant role. However, IS literature on the subject is extremely lacking. One of the popular theories in this context is the UTAUT model, which has certain limitations, especially when it concerns intention behavior gaps. Research on the entrepreneurship context identified precipitating events as a promising candidate to overcome such limitations. To address the gap in the UTAUT and improve the model, it is reviewed and empirically compared to the Entrepreneurial Potential Model (EPM in order to allow us to develop a new model that integrates elements from the two models in order to capture the different factors of IT adoption behavior.Methodology – a longitudinal survey approach is appropriate for this study, since this research design allows the researcher to test the overall fit of the integrative TADU model. The longitudinal study is appropriate to test the relationship between intention and use behavior and the effect of precipitating events on the time that intention is formed and behavior is performed. This is an ongoing research, and at this stage, the authors are mainly developing a theoretical argument and methodology that is currently in the process of being tested.Results – the new model mitigates the limitations arising from the UTAUT, particularly its predictive ability, and it also reduces the ‘distal nature’ between intention and use behavior.Study limitation – the paper represents work in progress and may some researcher criticize it in term of the predicted results.Practical significance

  16. Acceptability of GM foods among Pakistani consumers

    Science.gov (United States)

    Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

    2016-01-01

    ABSTRACT In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers. PMID:27494790

  17. Acceptability of GM foods among Pakistani consumers.

    Science.gov (United States)

    Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

    2016-04-02

    In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers.

  18. Hamiltonian inclusive fitness: a fitter fitness concept.

    Science.gov (United States)

    Costa, James T

    2013-01-01

    In 1963-1964 W. D. Hamilton introduced the concept of inclusive fitness, the only significant elaboration of Darwinian fitness since the nineteenth century. I discuss the origin of the modern fitness concept, providing context for Hamilton's discovery of inclusive fitness in relation to the puzzle of altruism. While fitness conceptually originates with Darwin, the term itself stems from Spencer and crystallized quantitatively in the early twentieth century. Hamiltonian inclusive fitness, with Price's reformulation, provided the solution to Darwin's 'special difficulty'-the evolution of caste polymorphism and sterility in social insects. Hamilton further explored the roles of inclusive fitness and reciprocation to tackle Darwin's other difficulty, the evolution of human altruism. The heuristically powerful inclusive fitness concept ramified over the past 50 years: the number and diversity of 'offspring ideas' that it has engendered render it a fitter fitness concept, one that Darwin would have appreciated.

  19. Pengaruh Internet Banking Terhadap Minat Nasabah Dalam Bertransaksi Dengan Technology Acceptance Model

    Directory of Open Access Journals (Sweden)

    Evi Yani

    2018-04-01

    Full Text Available Abstrak Internet banking merupakan salah satu teknologi transaksi perbankan yang ditawarkan oleh bank-bank komersial di Indonesia untuk para nasabah dalam melakukan transaksi seperti transfer, pembayaran, dan sebagainya dengan mudah dan cepat. Sebagian besar nasabah lebih memilih melakukan transaksi dengan internet banking dibandingkan harus mendatangi ke bank, hal ini berdasarkan OJK (Otoritas Jasa Keuangan mencatat bahwa jumlah pengguna e-banking meningkat sebesar 270 % dari 13,6 juta nasabah pada tahun 2012 menjadi 50,4 juta nasabah pada tahun 2016. Peningkatan terjadi dikarenakan adanya kebutuhan masyarakat dalam memanfaatkan teknologi. Penelitian ini bertujuan untuk mengetahui pengaruh internet banking terhadap minat nasabah dengan TAM (Technology Acceptance Modelyaitu persepsi kemudahan dan persepsi kegunaan. Metode pengumpulan data dengan kuesioner secara random sampling sebanyak 104 responden nasabah BRI dengan menggunakan skala Likert, pengujian data melalui uji validitas, reabilitas, normalitas, linearitas, uji regresi dan koefisien determinasi dan pengolahan kuesioner dengan SPSS. Hasil penelitian menunjukkan bahwa persepsi kemanfaatan penggunaan internet banking terhadap persepsi kemudahan dalam bertransaksi bagi nasabah Bank BRI.Semakin banyak manfaat yang dirasakan para nasabah,maka akan mempengaruhi kemudahan bagi nasabah setiap bertransaksi menggunakan internet banking. Kata Kunci: Internet banking, Technology Acceptance Model, persepsi kemudahan, persepsi kegunaan. Abstract Internet banking is one of the banking transaction technology offered by commercial banks in Indonesia for customers in transactions such as transfers, payments, and so on easily and quickly. Most customers prefer to make transactions with internet banking rather than go to banks, according to OJK (Financial Services Authority noting that the number of e-banking users increased by 270% from 13.6 million customers in 2012 to 50.4 million customers in the year

  20. Fitting the Phenomenological MSSM

    CERN Document Server

    AbdusSalam, S S; Quevedo, F; Feroz, F; Hobson, M

    2010-01-01

    We perform a global Bayesian fit of the phenomenological minimal supersymmetric standard model (pMSSM) to current indirect collider and dark matter data. The pMSSM contains the most relevant 25 weak-scale MSSM parameters, which are simultaneously fit using `nested sampling' Monte Carlo techniques in more than 15 years of CPU time. We calculate the Bayesian evidence for the pMSSM and constrain its parameters and observables in the context of two widely different, but reasonable, priors to determine which inferences are robust. We make inferences about sparticle masses, the sign of the $\\mu$ parameter, the amount of fine tuning, dark matter properties and the prospects for direct dark matter detection without assuming a restrictive high-scale supersymmetry breaking model. We find the inferred lightest CP-even Higgs boson mass as an example of an approximately prior independent observable. This analysis constitutes the first statistically convergent pMSSM global fit to all current data.

  1. CRAPONE, Optical Model Potential Fit of Neutron Scattering Data

    International Nuclear Information System (INIS)

    Fabbri, F.; Fratamico, G.; Reffo, G.

    2004-01-01

    1 - Description of problem or function: Automatic search for local and non-local optical potential parameters for neutrons. Total, elastic, differential elastic cross sections, l=0 and l=1 strength functions and scattering length can be considered. 2 - Method of solution: A fitting procedure is applied to different sets of experimental data depending on the local or non-local approximation chosen. In the non-local approximation the fitting procedure can be simultaneously performed over the whole energy range. The best fit is obtained when a set of parameters is found where CHI 2 is at its minimum. The solution of the system equations is obtained by diagonalization of the matrix according to the Jacobi method

  2. OTM Machine Acceptance: In the Arab Culture

    Science.gov (United States)

    Rashed, Abdullah; Santos, Henrique

    Basically, neglecting the human factor is one of the main reasons for system failures or for technology rejection, even when important technologies are considered. Biometrics mostly have the characteristics needed for effortless acceptance, such as easiness and usefulness, that are essential pillars of acceptance models such as TAM (technology acceptance model). However, it should be investigated. Many studies have been carried out to research the issues of technology acceptance in different cultures, especially the western culture. Arabic culture lacks these types of studies with few publications in this field. This paper introduces a new biometric interface for ATM machines. This interface depends on a promising biometrics which is odour. To discover the acceptance of this biometrics, we distributed a questionnaire via a web site and called for participation in the Arab Area and found that most respondents would accept to use odour.

  3. Stress exposure and generation: A conjoint longitudinal model of body dysmorphic symptoms, peer acceptance, popularity, and victimization.

    Science.gov (United States)

    Webb, Haley J; Zimmer-Gembeck, Melanie J; Mastro, Shawna

    2016-09-01

    This study examined the bidirectional (conjoint) longitudinal pathways linking adolescents' body dysmorphic disorder (BDD) symptoms with self- and peer-reported social functioning. Participants were 367 Australian students (45.5% boys, mean age=12.01 years) who participated in two waves of a longitudinal study with a 12-month lag between assessments. Participants self-reported their symptoms characteristic of BDD, and perception of peer acceptance. Classmates reported who was popular and victimized in their grade, and rated their liking (acceptance) of their classmates. In support of both stress exposure and stress generation models, T1 victimization was significantly associated with more symptoms characteristic of BDD at T2 relative to T1, and higher symptom level at T1 was associated with lower perceptions of peer acceptance at T2 relative to T1. These results support the hypothesized bidirectional model, whereby adverse social experiences negatively impact symptoms characteristic of BDD over time, and symptoms also exacerbate low perceptions of peer-acceptance. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Modeling nurses' attitude toward using automated unit-based medication storage and distribution systems: an extension of the technology acceptance model.

    Science.gov (United States)

    Escobar-Rodríguez, Tomás; Romero-Alonso, María Mercedes

    2013-05-01

    This article analyzes the attitude of nurses toward the use of automated unit-based medication storage and distribution systems and identifies influencing factors. Understanding these factors provides an opportunity to explore actions that might be taken to boost adoption by potential users. The theoretical grounding for this research is the Technology Acceptance Model. The Technology Acceptance Model specifies the causal relationships between perceived usefulness, perceived ease of use, attitude toward using, and actual usage behavior. The research model has six constructs, and nine hypotheses were generated from connections between these six constructs. These constructs include perceived risks, experience level, and training. The findings indicate that these three external variables are related to the perceived ease of use and perceived usefulness of automated unit-based medication storage and distribution systems, and therefore, they have a significant influence on attitude toward the use of these systems.

  5. Evaluation model for safety capacity of chemical industrial park based on acceptable regional risk

    Institute of Scientific and Technical Information of China (English)

    Guohua Chen; Shukun Wang; Xiaoqun Tan

    2015-01-01

    The paper defines the Safety Capacity of Chemical Industrial Park (SCCIP) from the perspective of acceptable regional risk. For the purpose of exploring the evaluation model for the SCCIP, a method based on quantitative risk assessment was adopted for evaluating transport risk and to confirm reasonable safety transport capacity of chemical industrial park, and then by combining with the safety storage capacity, a SCCIP evaluation model was put forward. The SCCIP was decided by the smaller one between the largest safety storage capacity and the maximum safety transport capacity, or else, the regional risk of the park will exceed the acceptable level. The developed method was applied to a chemical industrial park in Guangdong province to obtain the maximum safety transport capacity and the SCCIP. The results can be realized in the regional risk control of the park effectively.

  6. Acceptable respiratory protection program and LASL respirator research

    International Nuclear Information System (INIS)

    Skaggs, B.J.

    1979-01-01

    A short history is presented on the LASL Respiratory Protection Training Programs. Then a discussion is given on the major points of an acceptable respiratory protection program utilizing the points required by the Occupational, Safety, and Health Administration (OSHA) Regulation 29 CFR 1910.134. Contributions to respirator research are reviewed. Discussion is presented under the following section headings: program administration; respirator selection; respirator use; fitting and training; respirator maintenance; medical clearance and surveillance; special problems; program evaluation; and documentation

  7. A fuzzy inventory model with acceptable shortage using graded mean integration value method

    Science.gov (United States)

    Saranya, R.; Varadarajan, R.

    2018-04-01

    In many inventory models uncertainty is due to fuzziness and fuzziness is the closed possible approach to reality. In this paper, we proposed a fuzzy inventory model with acceptable shortage which is completely backlogged. We fuzzily the carrying cost, backorder cost and ordering cost using Triangular and Trapezoidal fuzzy numbers to obtain the fuzzy total cost. The purpose of our study is to defuzzify the total profit function by Graded Mean Integration Value Method. Further a numerical example is also given to demonstrate the developed crisp and fuzzy models.

  8. State Authenticity as Fit to Environment: The Implications of Social Identity for Fit, Authenticity, and Self-Segregation.

    Science.gov (United States)

    Schmader, Toni; Sedikides, Constantine

    2017-10-01

    People seek out situations that "fit," but the concept of fit is not well understood. We introduce State Authenticity as Fit to the Environment (SAFE), a conceptual framework for understanding how social identities motivate the situations that people approach or avoid. Drawing from but expanding the authenticity literature, we first outline three types of person-environment fit: self-concept fit, goal fit, and social fit. Each type of fit, we argue, facilitates cognitive fluency, motivational fluency, and social fluency that promote state authenticity and drive approach or avoidance behaviors. Using this model, we assert that contexts subtly signal social identities in ways that implicate each type of fit, eliciting state authenticity for advantaged groups but state inauthenticity for disadvantaged groups. Given that people strive to be authentic, these processes cascade down to self-segregation among social groups, reinforcing social inequalities. We conclude by mapping out directions for research on relevant mechanisms and boundary conditions.

  9. Fit-for-purpose: species distribution model performance depends on evaluation criteria - Dutch Hoverflies as a case study.

    Science.gov (United States)

    Aguirre-Gutiérrez, Jesús; Carvalheiro, Luísa G; Polce, Chiara; van Loon, E Emiel; Raes, Niels; Reemer, Menno; Biesmeijer, Jacobus C

    2013-01-01

    Understanding species distributions and the factors limiting them is an important topic in ecology and conservation, including in nature reserve selection and predicting climate change impacts. While Species Distribution Models (SDM) are the main tool used for these purposes, choosing the best SDM algorithm is not straightforward as these are plentiful and can be applied in many different ways. SDM are used mainly to gain insight in 1) overall species distributions, 2) their past-present-future probability of occurrence and/or 3) to understand their ecological niche limits (also referred to as ecological niche modelling). The fact that these three aims may require different models and outputs is, however, rarely considered and has not been evaluated consistently. Here we use data from a systematically sampled set of species occurrences to specifically test the performance of Species Distribution Models across several commonly used algorithms. Species range in distribution patterns from rare to common and from local to widespread. We compare overall model fit (representing species distribution), the accuracy of the predictions at multiple spatial scales, and the consistency in selection of environmental correlations all across multiple modelling runs. As expected, the choice of modelling algorithm determines model outcome. However, model quality depends not only on the algorithm, but also on the measure of model fit used and the scale at which it is used. Although model fit was higher for the consensus approach and Maxent, Maxent and GAM models were more consistent in estimating local occurrence, while RF and GBM showed higher consistency in environmental variables selection. Model outcomes diverged more for narrowly distributed species than for widespread species. We suggest that matching study aims with modelling approach is essential in Species Distribution Models, and provide suggestions how to do this for different modelling aims and species' data

  10. Application of hierarchical genetic models to Raven and WAIS subtests: a Dutch twin study

    NARCIS (Netherlands)

    Rijsdijk, F.V.; Vernon, P.A.; Boomsma, D.I.

    2002-01-01

    Hierarchical models of intelligence are highly informative and widely accepted. Application of these models to twin data, however, is sparse. This paper addresses the question of how a genetic hierarchical model fits the Wechsler Adult Intelligence Scale (WAIS) subtests and the Raven Standard

  11. Pilot Study of an Active Screen Time Game Correlates with Improved Physical Fitness in Minority Elementary School Youth.

    Science.gov (United States)

    Bethea, Terrence C; Berry, Diane; Maloney, Ann E; Sikich, Linmarie

    2012-02-01

    The aim of our feasibility study was to examine the acceptability and utility of "Dance Dance Revolution" (DDR) (Konami of America, Redwood City, CA)) to increase physical fitness in 8-11-year-old black and Hispanic youth. Twenty-eight 4(th) and 5(th) grade children attending an afterschool program participated. Outcomes included physical activity, physical fitness, use of home DDR, survey of safety and acceptability, anthropometrics, and fasting metabolic profile measured at baseline, 12 weeks, and 30 weeks. At 12 weeks, physical fitness (maximum O2 uptake [VO2max]) increased by 4.9±9.9 percent and was sustained through 30 weeks, when the VO2max was 105.0±9.9 percent (range, 93.0-133.9 percent) of baseline values. Absolute VO2max increased by 2.97±4.99 mL/kg/minute (95% confidence interval 0.75-5.19, P=0.013). Participants maintained an average of 1.12 hours/day of increased movement to music. Trends suggested increased total moderate-vigorous physical activity, decreased light activity, and a modest increase in sedentary screen time. There were no significant changes in body mass index, fasting lipids, or glucose. Participants and parents approved of the activity. DDR appears feasible and acceptable to minority youth. DDR may increase moderate-vigorous physical activity and improve physical fitness in at-risk populations.

  12. Estimation and prediction of maximum daily rainfall at Sagar Island using best fit probability models

    Science.gov (United States)

    Mandal, S.; Choudhury, B. U.

    2015-07-01

    Sagar Island, setting on the continental shelf of Bay of Bengal, is one of the most vulnerable deltas to the occurrence of extreme rainfall-driven climatic hazards. Information on probability of occurrence of maximum daily rainfall will be useful in devising risk management for sustaining rainfed agrarian economy vis-a-vis food and livelihood security. Using six probability distribution models and long-term (1982-2010) daily rainfall data, we studied the probability of occurrence of annual, seasonal and monthly maximum daily rainfall (MDR) in the island. To select the best fit distribution models for annual, seasonal and monthly time series based on maximum rank with minimum value of test statistics, three statistical goodness of fit tests, viz. Kolmogorove-Smirnov test (K-S), Anderson Darling test ( A 2 ) and Chi-Square test ( X 2) were employed. The fourth probability distribution was identified from the highest overall score obtained from the three goodness of fit tests. Results revealed that normal probability distribution was best fitted for annual, post-monsoon and summer seasons MDR, while Lognormal, Weibull and Pearson 5 were best fitted for pre-monsoon, monsoon and winter seasons, respectively. The estimated annual MDR were 50, 69, 86, 106 and 114 mm for return periods of 2, 5, 10, 20 and 25 years, respectively. The probability of getting an annual MDR of >50, >100, >150, >200 and >250 mm were estimated as 99, 85, 40, 12 and 03 % level of exceedance, respectively. The monsoon, summer and winter seasons exhibited comparatively higher probabilities (78 to 85 %) for MDR of >100 mm and moderate probabilities (37 to 46 %) for >150 mm. For different recurrence intervals, the percent probability of MDR varied widely across intra- and inter-annual periods. In the island, rainfall anomaly can pose a climatic threat to the sustainability of agricultural production and thus needs adequate adaptation and mitigation measures.

  13. Testing the goodness of fit of selected infiltration models on soils with different land use histories

    International Nuclear Information System (INIS)

    Mbagwu, J.S.C.

    1993-10-01

    Six infiltration models, some obtained by reformulating the fitting parameters of the classical Kostiakov (1932) and Philip (1957) equations, were investigated for their ability to describe water infiltration into highly permeable sandy soils from the Nsukka plains of SE Nigeria. The models were Kostiakov, Modified Kostiakov (A), Modified Kostiakov (B), Philip, Modified Philip (A) and Modified Philip (B). Infiltration data were obtained from double ring infiltrometers on field plots established on a Knadic Paleustult (Nkpologu series) to investigate the effects of land use on soil properties and maize yield. The treatments were; (i) tilled-mulched (TM), (ii) tilled-unmulched (TU), (iii) untilled-mulched (UM), (iv) untilled-unmulched (UU) and (v) continuous pasture (CP). Cumulative infiltration was highest on the TM and lowest on the CP plots. All estimated model parameters obtained by the best fit of measured data differed significantly among the treatments. Based on the magnitude of R 2 values, the Kostiakov, Modified Kostiakov (A), Philip and Modified Philip (A) models provided best predictions of cumulative infiltration as a function of time. Comparing experimental with model-predicted cumulative infiltration showed, however, that on all treatments the values predicted by the classical Kostiakov, Philip and Modified Philip (A) models deviated most from experimental data. The other models produced values that agreed very well with measured data. Considering the eases of determining the fitting parameters it is proposed that on soils with high infiltration rates, either Modified Kostiakov model (I = Kt a + Ict) or Modified Philip model (I St 1/2 + Ict), (where I is cumulative infiltration, K, the time coefficient, t, time elapsed, 'a' the time exponent, Ic the equilibrium infiltration rate and S, the soil water sorptivity), be used for routine characterization of the infiltration process. (author). 33 refs, 3 figs 6 tabs

  14. The acceptance of microblogging in the learning process: The µBAM model

    Directory of Open Access Journals (Sweden)

    Francisco Rejón-Guardia

    2013-03-01

    Full Text Available Microblogging social networks (µBSNs provide the opportunity to communicate worldwide making use of a small number of characters; an apparent limitation that forces users to share only essential information when linking to the world with which they interact. These platforms can serve to motivate students by narrowing the physical and psychological distances separating teachers and students, thus increasing their confidence and engagement in the learning process. The main thrust of this paper is based on the notion that µBSN opens a window on informal knowledge, self-directed learning and the creation of knowledge-based networks for use in the classroom setting. To examine this issue in greater depth, an experiment was carried out using a µBSN before, during and after face-to-face class sessions. In this study we used the Technology Acceptance Model (TAM, incorporating some of the constructs commonly found in the scientific literature. These constructs refer to the effect of subjective norms and social images on the use of web-based social networks. The analysis gave rise to a robust and parsimonious model of social network usage behavior that confirmed the proposed research hypotheses. The findings demonstrated that he extended TAM model is suitable for explaining the acceptance of web-based teaching tools as well as the validity of microblogging networks in combination with traditional classes.

  15. Evaluation of Online Video Usage and Learning Satisfaction: An Extension of the Technology Acceptance Model

    Science.gov (United States)

    Nagy, Judit T.

    2018-01-01

    The aim of the study was to examine the determining factors of students' video usage and their learning satisfaction relating to the supplementary application of educational videos, accessible in a Moodle environment in a Business Mathematics Course. The research model is based on the extension of "Technology Acceptance Model" (TAM), in…

  16. A bivariate contaminated binormal model for robust fitting of proper ROC curves to a pair of correlated, possibly degenerate, ROC datasets.

    Science.gov (United States)

    Zhai, Xuetong; Chakraborty, Dev P

    2017-06-01

    The objective was to design and implement a bivariate extension to the contaminated binormal model (CBM) to fit paired receiver operating characteristic (ROC) datasets-possibly degenerate-with proper ROC curves. Paired datasets yield two correlated ratings per case. Degenerate datasets have no interior operating points and proper ROC curves do not inappropriately cross the chance diagonal. The existing method, developed more than three decades ago utilizes a bivariate extension to the binormal model, implemented in CORROC2 software, which yields improper ROC curves and cannot fit degenerate datasets. CBM can fit proper ROC curves to unpaired (i.e., yielding one rating per case) and degenerate datasets, and there is a clear scientific need to extend it to handle paired datasets. In CBM, nondiseased cases are modeled by a probability density function (pdf) consisting of a unit variance peak centered at zero. Diseased cases are modeled with a mixture distribution whose pdf consists of two unit variance peaks, one centered at positive μ with integrated probability α, the mixing fraction parameter, corresponding to the fraction of diseased cases where the disease was visible to the radiologist, and one centered at zero, with integrated probability (1-α), corresponding to disease that was not visible. It is shown that: (a) for nondiseased cases the bivariate extension is a unit variances bivariate normal distribution centered at (0,0) with a specified correlation ρ 1 ; (b) for diseased cases the bivariate extension is a mixture distribution with four peaks, corresponding to disease not visible in either condition, disease visible in only one condition, contributing two peaks, and disease visible in both conditions. An expression for the likelihood function is derived. A maximum likelihood estimation (MLE) algorithm, CORCBM, was implemented in the R programming language that yields parameter estimates and the covariance matrix of the parameters, and other statistics

  17. Building Customer Churn Prediction Models in Fitness Industry with Machine Learning Methods

    OpenAIRE

    Shan, Min

    2017-01-01

    With the rapid growth of digital systems, churn management has become a major focus within customer relationship management in many industries. Ample research has been conducted for churn prediction in different industries with various machine learning methods. This thesis aims to combine feature selection and supervised machine learning methods for defining models of churn prediction and apply them on fitness industry. Forward selection is chosen as feature selection methods. Support Vector ...

  18. Different fits satisfy different needs: linking person-environment fit to employee commitment and performance using self-determination theory.

    Science.gov (United States)

    Greguras, Gary J; Diefendorff, James M

    2009-03-01

    Integrating and expanding upon the person-environment fit (PE fit) and the self-determination theory literatures, the authors hypothesized and tested a model in which the satisfaction of the psychological needs for autonomy, relatedness, and competence partially mediated the relations between different types of perceived PE fit (i.e., person-organization fit, person-group fit, and job demands-abilities fit) with employee affective organizational commitment and overall job performance. Data from 163 full-time working employees and their supervisors were collected across 3 time periods. Results indicate that different types of PE fit predicted different types of psychological need satisfaction and that psychological need satisfaction predicted affective commitment and performance. Further, person-organization fit and demands-abilities fit also evidenced direct effects on employee affective commitment. These results begin to explicate the processes through which different types of PE fit relate to employee attitudes and behaviors. (c) 2009 APA, all rights reserved.

  19. Fit reduced GUTS models online: From theory to practice.

    Science.gov (United States)

    Baudrot, Virgile; Veber, Philippe; Gence, Guillaume; Charles, Sandrine

    2018-05-20

    Mechanistic modeling approaches, such as the toxicokinetic-toxicodynamic (TKTD) framework, are promoted by international institutions such as the European Food Safety Authority and the Organization for Economic Cooperation and Development to assess the environmental risk of chemical products generated by human activities. TKTD models can encompass a large set of mechanisms describing the kinetics of compounds inside organisms (e.g., uptake and elimination) and their effect at the level of individuals (e.g., damage accrual, recovery, and death mechanism). Compared to classical dose-response models, TKTD approaches have many advantages, including accounting for temporal aspects of exposure and toxicity, considering data points all along the experiment and not only at the end, and making predictions for untested situations as realistic exposure scenarios. Among TKTD models, the general unified threshold model of survival (GUTS) is within the most recent and innovative framework but is still underused in practice, especially by risk assessors, because specialist programming and statistical skills are necessary to run it. Making GUTS models easier to use through a new module freely available from the web platform MOSAIC (standing for MOdeling and StAtistical tools for ecotoxIClogy) should promote GUTS operability in support of the daily work of environmental risk assessors. This paper presents the main features of MOSAIC_GUTS: uploading of the experimental data, GUTS fitting analysis, and LCx estimates with their uncertainty. These features will be exemplified from literature data. Integr Environ Assess Manag 2018;00:000-000. © 2018 SETAC. © 2018 SETAC.

  20. The challenges of modelling phosphorus in a headwater catchment: Applying a 'limits of acceptability' uncertainty framework to a water quality model

    Science.gov (United States)

    Hollaway, M. J.; Beven, K. J.; Benskin, C. McW. H.; Collins, A. L.; Evans, R.; Falloon, P. D.; Forber, K. J.; Hiscock, K. M.; Kahana, R.; Macleod, C. J. A.; Ockenden, M. C.; Villamizar, M. L.; Wearing, C.; Withers, P. J. A.; Zhou, J. G.; Barber, N. J.; Haygarth, P. M.

    2018-03-01

    There is a need to model and predict the transfer of phosphorus (P) from land to water, but this is challenging because of the large number of complex physical and biogeochemical processes involved. This study presents, for the first time, a 'limits of acceptability' approach of the Generalized Likelihood Uncertainty Estimation (GLUE) framework to the Soil and Water Assessment Tool (SWAT), in an application to a water quality problem in the Newby Beck catchment (12.5 km2), Cumbria, United Kingdom (UK). Using high frequency outlet data (discharge and P), individual evaluation criteria (limits of acceptability) were assigned to observed discharge and P loads for all evaluation time steps, identifying where the model was performing well/poorly and to infer which processes required improvement in the model structure. Initial limits of acceptability were required to be relaxed by a substantial amount (by factors of between 5.3 and 6.7 on a normalized scale depending on the evaluation criteria used) in order to gain a set of behavioral simulations (1001 and 1016, respectively out of 5,000,000). Of the 39 model parameters tested, the representation of subsurface processes and associated parameters, were consistently shown as critical to the model not meeting the evaluation criteria, irrespective of the chosen evaluation metric. It is therefore concluded that SWAT is not an appropriate model to guide P management in this catchment. This approach highlights the importance of high frequency monitoring data for setting robust model evaluation criteria. It also raises the question as to whether it is possible to have sufficient input data available to drive such models so that we can have confidence in their predictions and their ability to inform catchment management strategies to tackle the problem of diffuse pollution from agriculture.

  1. Do we have an acceptable model of power-law creep?

    CSIR Research Space (South Africa)

    Nabarro, FRN

    2004-12-15

    Full Text Available 387–389 (2004) 659–664 Do we have an acceptable model of power-law creep? F.R.N. Nabarro a,b,∗ a Condensed Matter Physics Research Group, School of Physics, University of the Witwatersrand, Private Bag 3, Johannesburg WITS 2050, South Africa b... an exponential function 0921-5093/$ – see front matter © 2004 Published by Elsevier B.V. doi:10.1016/j.msea.2003.09.118 660 F.R.N. Nabarro / Materials Science and Engineering A 387–389 (2004) 659–664 of the stress. There is little evidence whether the physical...

  2. Regulatory acceptance and use of 3R models for pharmaceuticals and chemicals: expert opinions on the state of affairs and the way forward.

    Science.gov (United States)

    Schiffelers, Marie-Jeanne W A; Blaauboer, Bas J; Bakker, Wieger E; Beken, Sonja; Hendriksen, Coenraad F M; Koëter, Herman B W M; Krul, Cyrille

    2014-06-01

    Pharmaceuticals and chemicals are subjected to regulatory safety testing accounting for approximately 25% of laboratory animal use in Europe. This testing meets various objections and has led to the development of a range of 3R models to Replace, Reduce or Refine the animal models. However, these models must overcome many barriers before being accepted for regulatory risk management purposes. This paper describes the barriers and drivers and options to optimize this acceptance process as identified by two expert panels, one on pharmaceuticals and one on chemicals. To untangle the complex acceptance process, the multilevel perspective on technology transitions is applied. This perspective defines influences at the micro-, meso- and macro level which need alignment to induce regulatory acceptance of a 3R model. This paper displays that there are many similar mechanisms within both sectors that prevent 3R models from becoming accepted for regulatory risk assessment and management. Shared barriers include the uncertainty about the value of the new 3R models (micro level), the lack of harmonization of regulatory requirements and acceptance criteria (meso level) and the high levels of risk aversion (macro level). In optimizing the process commitment, communication, cooperation and coordination are identified as critical drivers. Copyright © 2014 Elsevier Inc. All rights reserved.

  3. Analysis on the public acceptance of nuclear energy using structural equation model with latent variables

    International Nuclear Information System (INIS)

    Lee, Young Eal

    1996-02-01

    Comparison of the effect of education and public information on the public acceptance of nuclear energy is carried out. For the increase of public acceptance, the correct understanding on the nuclear energy via proper regular school education would be the first basis and the appropriate public information services by utility and unbiased mass media would be the second basis. Subjects that which is more effect in education or information and how much effective quantitatively to improve the public acceptance are derived. Structural Equation Model (SEM) with Latent Variables (LVs) in social science to public attitudes towards nuclear energy is developed. Questionnaire is conducted to respondents who took part in the program of visiting the nuclear power plant opened by OKAEA in 1995. As a result of the analysis, effect of education for correct awareness of nuclear energy is more sensitive to public acceptance than that of information. It is shown that the susceptibility in education factor in influence of radiation on human body and that in information factor persons consider nuclear power plant as an environmental polluter. It is concluded that radiation treatment should be a 'Hand on Experience' and general principle of nuclear power generation should be contained in the educational text book. Education and information should not been independently performed but been carried out simultaneously and mutually aided. It is shown that this modeling approach is useful to make the decision for the long-term nuclear energy policy transparent and successful

  4. Implementation, availability and regulatory status of an OECD accepted Reconstructed Human Epidermis model in Brazil

    Directory of Open Access Journals (Sweden)

    Rodrigo De Vecchi

    2018-02-01

    Full Text Available Introduction: In 2014, Brazil has joined the growing list of countries to ban cosmetic products from being tested on animal models. The new legislation comes into force in 2019. As a result, the interest for validated alternative testing methods for safety assessment has been increasing in academia, industry and associations. However, the lack of specific legislation on the use of biological material of human origin for toxicological tests makes the access to alternative in vitro models difficult. Furthermore, importation to Brazil is not possible on timely manner. Method: In this article, we report the implementation process of a Reconstructed Human Epidermis (SkinEthic™ RHE, an alternative model internationally accepted by OECD, through a technology transfer from EPISKIN® Lyon to Brazil. Regulatory evolution has been motivating the implementation and wide use of alternative methods to animal testing in several industry segments including cosmetic and pharmaceutical. Results: Protocol has been shown to be robust and highly reproducible. Quality control parameters (histological analysis, barrier function test and tissue viability were performed on 24 batches assembled in Brazil. SkinEthic™ RHE model use allows the full replacement of animal test methods for skin hazards identification. It has regulatory acceptance for several toxicological endpoints, such as the Draize test for skin irritation and corrosion. It allows the reduction and refining of pre-clinical protocols through tiered strategies. Implementation of SkinEthic™ RHE protocol is just a first and important step towards a new approach of toxicological safety testing in Brazil. Conclusion: The implementation was successfully done and reported here. However, in order to follow completely the new legislation up to 2019, the availability of validated models is essential. Quality control tests done on RHE batches produced in Brazil demonstrate that the model met OECD acceptance

  5. AMS-02 fits dark matter

    Science.gov (United States)

    Balázs, Csaba; Li, Tong

    2016-05-01

    In this work we perform a comprehensive statistical analysis of the AMS-02 electron, positron fluxes and the antiproton-to-proton ratio in the context of a simplified dark matter model. We include known, standard astrophysical sources and a dark matter component in the cosmic ray injection spectra. To predict the AMS-02 observables we use propagation parameters extracted from observed fluxes of heavier nuclei and the low energy part of the AMS-02 data. We assume that the dark matter particle is a Majorana fermion coupling to third generation fermions via a spin-0 mediator, and annihilating to multiple channels at once. The simultaneous presence of various annihilation channels provides the dark matter model with additional flexibility, and this enables us to simultaneously fit all cosmic ray spectra using a simple particle physics model and coherent astrophysical assumptions. Our results indicate that AMS-02 observations are not only consistent with the dark matter hypothesis within the uncertainties, but adding a dark matter contribution improves the fit to the data. Assuming, however, that dark matter is solely responsible for this improvement of the fit, it is difficult to evade the latest CMB limits in this model.

  6. AMS-02 fits dark matter

    Energy Technology Data Exchange (ETDEWEB)

    Balázs, Csaba; Li, Tong [ARC Centre of Excellence for Particle Physics at the Tera-scale,School of Physics and Astronomy, Monash University, Melbourne, Victoria 3800 (Australia)

    2016-05-05

    In this work we perform a comprehensive statistical analysis of the AMS-02 electron, positron fluxes and the antiproton-to-proton ratio in the context of a simplified dark matter model. We include known, standard astrophysical sources and a dark matter component in the cosmic ray injection spectra. To predict the AMS-02 observables we use propagation parameters extracted from observed fluxes of heavier nuclei and the low energy part of the AMS-02 data. We assume that the dark matter particle is a Majorana fermion coupling to third generation fermions via a spin-0 mediator, and annihilating to multiple channels at once. The simultaneous presence of various annihilation channels provides the dark matter model with additional flexibility, and this enables us to simultaneously fit all cosmic ray spectra using a simple particle physics model and coherent astrophysical assumptions. Our results indicate that AMS-02 observations are not only consistent with the dark matter hypothesis within the uncertainties, but adding a dark matter contribution improves the fit to the data. Assuming, however, that dark matter is solely responsible for this improvement of the fit, it is difficult to evade the latest CMB limits in this model.

  7. A History of Regression and Related Model-Fitting in the Earth Sciences (1636?-2000)

    International Nuclear Information System (INIS)

    Howarth, Richard J.

    2001-01-01

    The (statistical) modeling of the behavior of a dependent variate as a function of one or more predictors provides examples of model-fitting which span the development of the earth sciences from the 17th Century to the present. The historical development of these methods and their subsequent application is reviewed. Bond's predictions (c. 1636 and 1668) of change in the magnetic declination at London may be the earliest attempt to fit such models to geophysical data. Following publication of Newton's theory of gravitation in 1726, analysis of data on the length of a 1 o meridian arc, and the length of a pendulum beating seconds, as a function of sin 2 (latitude), was used to determine the ellipticity of the oblate spheroid defining the Figure of the Earth. The pioneering computational methods of Mayer in 1750, Boscovich in 1755, and Lambert in 1765, and the subsequent independent discoveries of the principle of least squares by Gauss in 1799, Legendre in 1805, and Adrain in 1808, and its later substantiation on the basis of probability theory by Gauss in 1809 were all applied to the analysis of such geodetic and geophysical data. Notable later applications include: the geomagnetic survey of Ireland by Lloyd, Sabine, and Ross in 1836, Gauss's model of the terrestrial magnetic field in 1838, and Airy's 1845 analysis of the residuals from a fit to pendulum lengths, from which he recognized the anomalous character of measurements of gravitational force which had been made on islands. In the early 20th Century applications to geological topics proliferated, but the computational burden effectively held back applications of multivariate analysis. Following World War II, the arrival of digital computers in universities in the 1950s facilitated computation, and fitting linear or polynomial models as a function of geographic coordinates, trend surface analysis, became popular during the 1950-60s. The inception of geostatistics in France at this time by Matheron had its

  8. A Sport Education Fitness Season's Impact on Students' Fitness Levels, Knowledge, and In-Class Physical Activity.

    Science.gov (United States)

    Ward, Jeffery Kurt; Hastie, Peter A; Wadsworth, Danielle D; Foote, Shelby; Brock, Sheri J; Hollett, Nikki

    2017-09-01

    The purpose of this study was to determine the extent to which a sport education season of fitness could provide students with recommended levels of in-class moderate-to-vigorous physical activity (MVPA) while also increasing students' fitness knowledge and fitness achievement. One hundred and sixty-six 5th-grade students (76 boys, 90 girls) participated in a 20-lesson season called "CrossFit Challenge" during a 4-week period. The Progressive Aerobic Cardiovascular Endurance Run, push-ups, and curl-ups tests of the FITNESSGRAM® were used to assess fitness at pretest and posttest, while fitness knowledge was assessed through a validated, grade-appropriate test of health-related fitness knowledge (HRF). Physical activity was measured with Actigraph GT3X triaxial accelerometers. Results indicated a significant time effect for all fitness tests and the knowledge test. Across the entire season, the students spent an average of 54.5% of lesson time engaged in MVPA, irrespective of the type of lesson (instruction, free practice, or competition). The results suggest that configuring the key principles of sport education within a unit of fitness is an efficient model for providing students with the opportunity to improve fitness skill and HRF knowledge while attaining recommended levels of MVPA.

  9. An Exploration of Student Internet Use in India: The Technology Acceptance Model and the Theory of Planned Behaviour

    Science.gov (United States)

    Fusilier, Marcelline; Durlabhji, Subhash

    2005-01-01

    Purpose: The purpose of this paper is to explore behavioral processes involved in internet technology acceptance and use with a sample in India, a developing country that can potentially benefit from greater participation in the web economy. Design/methodology/approach - User experience was incorporated into the technology acceptance model (TAM)…

  10. The More, the Better? Curvilinear Effects of Job Autonomy on Well-Being From Vitamin Model and PE-Fit Theory Perspectives.

    Science.gov (United States)

    Stiglbauer, Barbara; Kovacs, Carrie

    2017-12-28

    In organizational psychology research, autonomy is generally seen as a job resource with a monotone positive relationship with desired occupational outcomes such as well-being. However, both Warr's vitamin model and person-environment (PE) fit theory suggest that negative outcomes may result from excesses of some job resources, including autonomy. Thus, the current studies used survey methodology to explore cross-sectional relationships between environmental autonomy, person-environment autonomy (mis)fit, and well-being. We found that autonomy and autonomy (mis)fit explained between 6% and 22% of variance in well-being, depending on type of autonomy (scheduling, method, or decision-making) and type of (mis)fit operationalization (atomistic operationalization through the separate assessment of actual and ideal autonomy levels vs. molecular operationalization through the direct assessment of perceived autonomy (mis)fit). Autonomy (mis)fit (PE-fit perspective) explained more unique variance in well-being than environmental autonomy itself (vitamin model perspective). Detrimental effects of autonomy excess on well-being were most evident for method autonomy and least consistent for decision-making autonomy. We argue that too-much-of-a-good-thing effects of job autonomy on well-being exist, but suggest that these may be dependent upon sample characteristics (range of autonomy levels), type of operationalization (molecular vs. atomistic fit), autonomy facet (method, scheduling, or decision-making), as well as individual and organizational moderators. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  11. Global fits of GUT-scale SUSY models with GAMBIT

    Science.gov (United States)

    Athron, Peter; Balázs, Csaba; Bringmann, Torsten; Buckley, Andy; Chrząszcz, Marcin; Conrad, Jan; Cornell, Jonathan M.; Dal, Lars A.; Edsjö, Joakim; Farmer, Ben; Jackson, Paul; Krislock, Abram; Kvellestad, Anders; Mahmoudi, Farvah; Martinez, Gregory D.; Putze, Antje; Raklev, Are; Rogan, Christopher; de Austri, Roberto Ruiz; Saavedra, Aldo; Savage, Christopher; Scott, Pat; Serra, Nicola; Weniger, Christoph; White, Martin

    2017-12-01

    We present the most comprehensive global fits to date of three supersymmetric models motivated by grand unification: the constrained minimal supersymmetric standard model (CMSSM), and its Non-Universal Higgs Mass generalisations NUHM1 and NUHM2. We include likelihoods from a number of direct and indirect dark matter searches, a large collection of electroweak precision and flavour observables, direct searches for supersymmetry at LEP and Runs I and II of the LHC, and constraints from Higgs observables. Our analysis improves on existing results not only in terms of the number of included observables, but also in the level of detail with which we treat them, our sampling techniques for scanning the parameter space, and our treatment of nuisance parameters. We show that stau co-annihilation is now ruled out in the CMSSM at more than 95% confidence. Stop co-annihilation turns out to be one of the most promising mechanisms for achieving an appropriate relic density of dark matter in all three models, whilst avoiding all other constraints. We find high-likelihood regions of parameter space featuring light stops and charginos, making them potentially detectable in the near future at the LHC. We also show that tonne-scale direct detection will play a largely complementary role, probing large parts of the remaining viable parameter space, including essentially all models with multi-TeV neutralinos.

  12. Global fits of GUT-scale SUSY models with GAMBIT

    Energy Technology Data Exchange (ETDEWEB)

    Athron, Peter [Monash University, School of Physics and Astronomy, Melbourne, VIC (Australia); Australian Research Council Centre of Excellence for Particle Physics at the Tera-scale (Australia); Balazs, Csaba [Monash University, School of Physics and Astronomy, Melbourne, VIC (Australia); Australian Research Council Centre of Excellence for Particle Physics at the Tera-scale (Australia); Bringmann, Torsten; Dal, Lars A.; Krislock, Abram; Raklev, Are [University of Oslo, Department of Physics, Oslo (Norway); Buckley, Andy [University of Glasgow, SUPA, School of Physics and Astronomy, Glasgow (United Kingdom); Chrzaszcz, Marcin [Universitaet Zuerich, Physik-Institut, Zurich (Switzerland); H. Niewodniczanski Institute of Nuclear Physics, Polish Academy of Sciences, Krakow (Poland); Conrad, Jan; Edsjoe, Joakim; Farmer, Ben [AlbaNova University Centre, Oskar Klein Centre for Cosmoparticle Physics, Stockholm (Sweden); Stockholm University, Department of Physics, Stockholm (Sweden); Cornell, Jonathan M. [McGill University, Department of Physics, Montreal, QC (Canada); Jackson, Paul; White, Martin [Australian Research Council Centre of Excellence for Particle Physics at the Tera-scale (Australia); University of Adelaide, Department of Physics, Adelaide, SA (Australia); Kvellestad, Anders; Savage, Christopher [NORDITA, Stockholm (Sweden); Mahmoudi, Farvah [Univ Lyon, Univ Lyon 1, CNRS, ENS de Lyon, Centre de Recherche Astrophysique de Lyon UMR5574, Saint-Genis-Laval (France); Theoretical Physics Department, CERN, Geneva (Switzerland); Martinez, Gregory D. [University of California, Physics and Astronomy Department, Los Angeles, CA (United States); Putze, Antje [LAPTh, Universite de Savoie, CNRS, Annecy-le-Vieux (France); Rogan, Christopher [Harvard University, Department of Physics, Cambridge, MA (United States); Ruiz de Austri, Roberto [IFIC-UV/CSIC, Instituto de Fisica Corpuscular, Valencia (Spain); Saavedra, Aldo [Australian Research Council Centre of Excellence for Particle Physics at the Tera-scale (Australia); The University of Sydney, Faculty of Engineering and Information Technologies, Centre for Translational Data Science, School of Physics, Camperdown, NSW (Australia); Scott, Pat [Imperial College London, Department of Physics, Blackett Laboratory, London (United Kingdom); Serra, Nicola [Universitaet Zuerich, Physik-Institut, Zurich (Switzerland); Weniger, Christoph [University of Amsterdam, GRAPPA, Institute of Physics, Amsterdam (Netherlands); Collaboration: The GAMBIT Collaboration

    2017-12-15

    We present the most comprehensive global fits to date of three supersymmetric models motivated by grand unification: the constrained minimal supersymmetric standard model (CMSSM), and its Non-Universal Higgs Mass generalisations NUHM1 and NUHM2. We include likelihoods from a number of direct and indirect dark matter searches, a large collection of electroweak precision and flavour observables, direct searches for supersymmetry at LEP and Runs I and II of the LHC, and constraints from Higgs observables. Our analysis improves on existing results not only in terms of the number of included observables, but also in the level of detail with which we treat them, our sampling techniques for scanning the parameter space, and our treatment of nuisance parameters. We show that stau co-annihilation is now ruled out in the CMSSM at more than 95% confidence. Stop co-annihilation turns out to be one of the most promising mechanisms for achieving an appropriate relic density of dark matter in all three models, whilst avoiding all other constraints. We find high-likelihood regions of parameter space featuring light stops and charginos, making them potentially detectable in the near future at the LHC. We also show that tonne-scale direct detection will play a largely complementary role, probing large parts of the remaining viable parameter space, including essentially all models with multi-TeV neutralinos. (orig.)

  13. Hair length, facial attractiveness, personality attribution: A multiple fitness model of hairdressing

    OpenAIRE

    Bereczkei, Tamas; Mesko, Norbert

    2007-01-01

    Multiple Fitness Model states that attractiveness varies across multiple dimensions, with each feature representing a different aspect of mate value. In the present study, male raters judged the attractiveness of young females with neotenous and mature facial features, with various hair lengths. Results revealed that the physical appearance of long-haired women was rated high, regardless of their facial attractiveness being valued high or low. Women rated as most attractive were those whose f...

  14. Risk Acceptance Criteria and/or Decision optimization

    DEFF Research Database (Denmark)

    Ditlevsen, Ove Dalager

    1996-01-01

    Acceptance criteria applied in practical risk analysis are recapitulated including the concept of rist profile. Modelling of risk profiles is illustrated on the basis of compound Poisson process models. The current practice of authoritative acceptance criteria formulation is discussed from...... a decision theoretical point of view. It is argued that the phenomenon of risk aversion rather than being of concern to the authority should be of concern to the owner. Finally it is discussed whether there is an ethical problem when formally capitalising human lives with a positive interest rate. Keywords......: Risk acceptance, Risk profile, Compound Poisson model for risk profile, Capitalization of human life, Risk aversion....

  15. A classical regression framework for mediation analysis: fitting one model to estimate mediation effects.

    Science.gov (United States)

    Saunders, Christina T; Blume, Jeffrey D

    2017-10-26

    Mediation analysis explores the degree to which an exposure's effect on an outcome is diverted through a mediating variable. We describe a classical regression framework for conducting mediation analyses in which estimates of causal mediation effects and their variance are obtained from the fit of a single regression model. The vector of changes in exposure pathway coefficients, which we named the essential mediation components (EMCs), is used to estimate standard causal mediation effects. Because these effects are often simple functions of the EMCs, an analytical expression for their model-based variance follows directly. Given this formula, it is instructive to revisit the performance of routinely used variance approximations (e.g., delta method and resampling methods). Requiring the fit of only one model reduces the computation time required for complex mediation analyses and permits the use of a rich suite of regression tools that are not easily implemented on a system of three equations, as would be required in the Baron-Kenny framework. Using data from the BRAIN-ICU study, we provide examples to illustrate the advantages of this framework and compare it with the existing approaches. © The Author 2017. Published by Oxford University Press.

  16. Psychosocial work environment and health in U.S. metropolitan areas: a test of the demand-control and demand-control-support models.

    Science.gov (United States)

    Muntaner, C; Schoenbach, C

    1994-01-01

    The authors use confirmatory factor analysis to investigate the psychosocial dimensions of work environments relevant to health outcomes, in a representative sample of five U.S. metropolitan areas. Through an aggregated inference system, scales from Schwartz and associates' job scoring system and from the Dictionary of Occupational Titles (DOT) were employed to examine two alternative models: the demand-control model of Karasek and Theorell and Johnson's demand-control-support model. Confirmatory factor analysis was used to test the two models. The two multidimensional models yielded better fits than an unstructured model. After allowing for the measurement error variance due to the method of assessment (Schwartz and associates' system or DOT), both models yielded acceptable goodness-of-fit indices, but the fit of the demand-control-support model was significantly better. Overall these results indicate that the dimensions of Control (substantive complexity of work, skill discretion, decision authority), Demands (physical exertion, physical demands and hazards), and Social Support (coworker and supervisor social supports) provide an acceptable account of the psychosocial dimensions of work associated with health outcomes.

  17. Are all models created equal? A content analysis of women in advertisements of fitness versus fashion magazines.

    Science.gov (United States)

    Wasylkiw, L; Emms, A A; Meuse, R; Poirier, K F

    2009-03-01

    The current study is a content analysis of women appearing in advertisements in two types of magazines: fitness/health versus fashion/beauty chosen because of their large and predominantly female readerships. Women appearing in advertisements of the June 2007 issue of five fitness/health magazines were compared to women appearing in advertisements of the June 2007 issue of five beauty/fashion magazines. Female models appearing in advertisements of both types of magazines were primarily young, thin Caucasians; however, images of models were more likely to emphasize appearance over performance when they appeared in fashion magazines. This difference in emphasis has implications for future research.

  18. A Monte Carlo-adjusted goodness-of-fit test for parametric models describing spatial point patterns

    KAUST Repository

    Dao, Ngocanh; Genton, Marc G.

    2014-01-01

    Assessing the goodness-of-fit (GOF) for intricate parametric spatial point process models is important for many application fields. When the probability density of the statistic of the GOF test is intractable, a commonly used procedure is the Monte

  19. Fitness function and nonunique solutions in x-ray reflectivity curve fitting: crosserror between surface roughness and mass density

    International Nuclear Information System (INIS)

    Tiilikainen, J; Bosund, V; Mattila, M; Hakkarainen, T; Sormunen, J; Lipsanen, H

    2007-01-01

    Nonunique solutions of the x-ray reflectivity (XRR) curve fitting problem were studied by modelling layer structures with neural networks and designing a fitness function to handle the nonidealities of measurements. Modelled atomic-layer-deposited aluminium oxide film structures were used in the simulations to calculate XRR curves based on Parratt's formalism. This approach reduced the dimensionality of the parameter space and allowed the use of fitness landscapes in the study of nonunique solutions. Fitness landscapes, where the height in a map represents the fitness value as a function of the process parameters, revealed tracks where the local fitness optima lie. The tracks were projected on the physical parameter space thus allowing the construction of the crosserror equation between weakly determined parameters, i.e. between the mass density and the surface roughness of a layer. The equation gives the minimum error for the other parameters which is a consequence of the nonuniqueness of the solution if noise is present. Furthermore, the existence of a possible unique solution in a certain parameter range was found to be dependent on the layer thickness and the signal-to-noise ratio

  20. Understanding intention to use electronic information resources: A theoretical extension of the technology acceptance model (TAM).

    Science.gov (United States)

    Tao, Donghua

    2008-11-06

    This study extended the Technology Acceptance Model (TAM) by examining the roles of two aspects of e-resource characteristics, namely, information quality and system quality, in predicting public health students' intention to use e-resources for completing research paper assignments. Both focus groups and a questionnaire were used to collect data. Descriptive analysis, data screening, and Structural Equation Modeling (SEM) techniques were used for data analysis. The study found that perceived usefulness played a major role in determining students' intention to use e-resources. Perceived usefulness and perceived ease of use fully mediated the impact that information quality and system quality had on behavior intention. The research model enriches the existing technology acceptance literature by extending TAM. Representing two aspects of e-resource characteristics provides greater explanatory information for diagnosing problems of system design, development, and implementation.

  1. A meta-analysis of the technology acceptance model : investigating subjective norm and moderation effects

    NARCIS (Netherlands)

    Schepers, J.J.L.; Wetzels, M.G.M.

    2007-01-01

    We conducted a quantitative meta-analysis of previous research on the technology acceptance model (TAM) in an attempt to make well-grounded statements on the role of subjective norm. Furthermore, we compared TAM results by taking into account moderating effects of one individual-related factor (type

  2. Satiated with belongingness? Effects of acceptance, rejection, and task framing on self-regulatory performance.

    Science.gov (United States)

    DeWall, C Nathan; Baumeister, Roy F; Vohs, Kathleen D

    2008-12-01

    Seven experiments showed that the effects of social acceptance and social exclusion on self-regulatory performance depend on the prospect of future acceptance. Excluded participants showed decrements in self-regulation, but these decrements were eliminated if the self-regulation task was ostensibly a diagnostic indicator of the ability to get along with others. No such improvement was found when the task was presented as diagnostic of good health. Accepted participants, in contrast, performed relatively poorly when the task was framed as a diagnostic indicator of interpersonally attractive traits. Furthermore, poor performance among accepted participants was not due to self-handicapping or overconfidence. Offering accepted participants a cash incentive for self-regulating eliminated the self-regulation deficits. These findings provide evidence that the need to belong fits standard motivational patterns: Thwarting the drive intensifies it, whereas satiating it leads to temporary reduction in drive. Accepted people are normally good at self-regulation but are unwilling to exert the effort to self-regulate if self-regulation means gaining the social acceptance they have already obtained.

  3. Fitting and Calibrating a Multilevel Mixed-Effects Stem Taper Model for Maritime Pine in NW Spain

    Science.gov (United States)

    Arias-Rodil, Manuel; Castedo-Dorado, Fernando; Cámara-Obregón, Asunción; Diéguez-Aranda, Ulises

    2015-01-01

    Stem taper data are usually hierarchical (several measurements per tree, and several trees per plot), making application of a multilevel mixed-effects modelling approach essential. However, correlation between trees in the same plot/stand has often been ignored in previous studies. Fitting and calibration of a variable-exponent stem taper function were conducted using data from 420 trees felled in even-aged maritime pine (Pinus pinaster Ait.) stands in NW Spain. In the fitting step, the tree level explained much more variability than the plot level, and therefore calibration at plot level was omitted. Several stem heights were evaluated for measurement of the additional diameter needed for calibration at tree level. Calibration with an additional diameter measured at between 40 and 60% of total tree height showed the greatest improvement in volume and diameter predictions. If additional diameter measurement is not available, the fixed-effects model fitted by the ordinary least squares technique should be used. Finally, we also evaluated how the expansion of parameters with random effects affects the stem taper prediction, as we consider this a key question when applying the mixed-effects modelling approach to taper equations. The results showed that correlation between random effects should be taken into account when assessing the influence of random effects in stem taper prediction. PMID:26630156

  4. Causal Relationship Model of the Information and Communication Technology Skill Affect the Technology Acceptance Process in the 21ST Century for Undergraduate Students

    Directory of Open Access Journals (Sweden)

    Thanyatorn Amornkitpinyo

    2015-02-01

    Full Text Available The objective of this study is to design a framework for a causal relationship model of the Information and Communication Technology skills that affect the Technology Acceptance Process (TAP for undergraduate students in the 21ST Century. This research uses correlational analysis. A consideration of the research methodology is divided into two sections. The first section involves a synthesis concept framework for process acceptance of the causal relationship model of the Information and Communication Technology skills that affect the Technology Acceptance Process for undergraduate students in the 21ST Century. The second section proposes the design concept framework of the model. The research findings are as follows: 1 The exogenous latent variables included in the causal relationship model of the Information and Communication Technology skills that affect the Technology Acceptance Process for undergraduate students in the 21ST Century are basic ICT skills and self-efficacy. 2 The mediating latent variables of the causal relationship model of the Information and Communication Technology skills that affect the Technology Acceptance Process for undergraduate students in the 21ST Century are from the TAM Model, these includes three components: 1 perceived usefulness, 2 perceived ease of use and 3 attitudes. 3 The outcome latent variable of the causal relationship model of the Information and Communication Technology skills that affect the Technology Acceptance Process for undergraduate students in the 21ST Century is behavioural intention.

  5. Neural network hydrological modelling: on questions of over-fitting, over-training and over-parameterisation

    Science.gov (United States)

    Abrahart, R. J.; Dawson, C. W.; Heppenstall, A. J.; See, L. M.

    2009-04-01

    The most critical issue in developing a neural network model is generalisation: how well will the preferred solution perform when it is applied to unseen datasets? The reported experiments used far-reaching sequences of model architectures and training periods to investigate the potential damage that could result from the impact of several interrelated items: (i) over-fitting - a machine learning concept related to exceeding some optimal architectural size; (ii) over-training - a machine learning concept related to the amount of adjustment that is applied to a specific model - based on the understanding that too much fine-tuning might result in a model that had accommodated random aspects of its training dataset - items that had no causal relationship to the target function; and (iii) over-parameterisation - a statistical modelling concept that is used to restrict the number of parameters in a model so as to match the information content of its calibration dataset. The last item in this triplet stems from an understanding that excessive computational complexities might permit an absurd and false solution to be fitted to the available material. Numerous feedforward multilayered perceptrons were trialled and tested. Two different methods of model construction were also compared and contrasted: (i) traditional Backpropagation of Error; and (ii) state-of-the-art Symbiotic Adaptive Neuro-Evolution. Modelling solutions were developed using the reported experimental set ups of Gaume & Gosset (2003). The models were applied to a near-linear hydrological modelling scenario in which past upstream and past downstream discharge records were used to forecast current discharge at the downstream gauging station [CS1: River Marne]; and a non-linear hydrological modelling scenario in which past river discharge measurements and past local meteorological records (precipitation and evaporation) were used to forecast current discharge at the river gauging station [CS2: Le Sauzay].

  6. Universality Classes of Interaction Structures for NK Fitness Landscapes

    Science.gov (United States)

    Hwang, Sungmin; Schmiegelt, Benjamin; Ferretti, Luca; Krug, Joachim

    2018-02-01

    Kauffman's NK-model is a paradigmatic example of a class of stochastic models of genotypic fitness landscapes that aim to capture generic features of epistatic interactions in multilocus systems. Genotypes are represented as sequences of L binary loci. The fitness assigned to a genotype is a sum of contributions, each of which is a random function defined on a subset of k ≤ L loci. These subsets or neighborhoods determine the genetic interactions of the model. Whereas earlier work on the NK model suggested that most of its properties are robust with regard to the choice of neighborhoods, recent work has revealed an important and sometimes counter-intuitive influence of the interaction structure on the properties of NK fitness landscapes. Here we review these developments and present new results concerning the number of local fitness maxima and the statistics of selectively accessible (that is, fitness-monotonic) mutational pathways. In particular, we develop a unified framework for computing the exponential growth rate of the expected number of local fitness maxima as a function of L, and identify two different universality classes of interaction structures that display different asymptotics of this quantity for large k. Moreover, we show that the probability that the fitness landscape can be traversed along an accessible path decreases exponentially in L for a large class of interaction structures that we characterize as locally bounded. Finally, we discuss the impact of the NK interaction structures on the dynamics of evolution using adaptive walk models.

  7. Statistical topography of fitness landscapes

    OpenAIRE

    Franke, Jasper

    2011-01-01

    Fitness landscapes are generalized energy landscapes that play an important conceptual role in evolutionary biology. These landscapes provide a relation between the genetic configuration of an organism and that organism’s adaptive properties. In this work, global topographical features of these fitness landscapes are investigated using theoretical models. The resulting predictions are compared to empirical landscapes. It is shown that these landscapes allow, at least with respe...

  8. Testing the Electronic Personal Health Record Acceptance Model by Nurses for Managing Their Own Health

    Science.gov (United States)

    Trinkoff, A.M.; Storr, C.L.; Wilson, M.L.; Gurses, A.P.

    2015-01-01

    Summary Background To our knowledge, no evidence is available on health care professionals’ use of electronic personal health records (ePHRs) for their health management. We therefore focused on nurses’ personal use of ePHRs using a modified technology acceptance model. Objectives To examine (1) the psychometric properties of the ePHR acceptance model, (2) the associations of perceived usefulness, ease of use, data privacy and security protection, and perception of self as health-promoting role models to nurses’ own ePHR use, and (3) the moderating influences of age, chronic illness and medication use, and providers’ use of electronic health record (EHRs) on the associations between the ePHR acceptance constructs and ePHR use. Methods A convenience sample of registered nurses, those working in one of 12 hospitals in the Maryland and Washington, DC areas and members of the nursing informatics community (AMIA and HIMSS), were invited to respond to an anonymous online survey; 847 responded. Multiple logistic regression identified associations between the model constructs and ePHR use, and the moderating effect. Results Overall, ePHRs were used by 47%. Sufficient reliability for all scales was found. Three constructs were significantly related to nurses’ own ePHR use after adjusting for covariates: usefulness, data privacy and security protection, and health-promoting role model. Nurses with providers that used EHRs who perceived a higher level of data privacy and security protection had greater odds of ePHR use than those whose providers did not use EHRs. Older nurses with a higher self-perception as health-promoting role models had greater odds of ePHR use than younger nurses. Conclusions Nurses who use ePHRs for their personal health might promote adoption by the general public by serving as health-promoting role models. They can contribute to improvements in patient education and ePHR design, and serve as crucial resources when working with their

  9. Fitting a defect non-linear model with or without prior, distinguishing nuclear reaction products as an example

    Science.gov (United States)

    Helgesson, P.; Sjöstrand, H.

    2017-11-01

    Fitting a parametrized function to data is important for many researchers and scientists. If the model is non-linear and/or defect, it is not trivial to do correctly and to include an adequate uncertainty analysis. This work presents how the Levenberg-Marquardt algorithm for non-linear generalized least squares fitting can be used with a prior distribution for the parameters and how it can be combined with Gaussian processes to treat model defects. An example, where three peaks in a histogram are to be distinguished, is carefully studied. In particular, the probability r1 for a nuclear reaction to end up in one out of two overlapping peaks is studied. Synthetic data are used to investigate effects of linearizations and other assumptions. For perfect Gaussian peaks, it is seen that the estimated parameters are distributed close to the truth with good covariance estimates. This assumes that the method is applied correctly; for example, prior knowledge should be implemented using a prior distribution and not by assuming that some parameters are perfectly known (if they are not). It is also important to update the data covariance matrix using the fit if the uncertainties depend on the expected value of the data (e.g., for Poisson counting statistics or relative uncertainties). If a model defect is added to the peaks, such that their shape is unknown, a fit which assumes perfect Gaussian peaks becomes unable to reproduce the data, and the results for r1 become biased. It is, however, seen that it is possible to treat the model defect with a Gaussian process with a covariance function tailored for the situation, with hyper-parameters determined by leave-one-out cross validation. The resulting estimates for r1 are virtually unbiased, and the uncertainty estimates agree very well with the underlying uncertainty.

  10. Fitting a defect non-linear model with or without prior, distinguishing nuclear reaction products as an example.

    Science.gov (United States)

    Helgesson, P; Sjöstrand, H

    2017-11-01

    Fitting a parametrized function to data is important for many researchers and scientists. If the model is non-linear and/or defect, it is not trivial to do correctly and to include an adequate uncertainty analysis. This work presents how the Levenberg-Marquardt algorithm for non-linear generalized least squares fitting can be used with a prior distribution for the parameters and how it can be combined with Gaussian processes to treat model defects. An example, where three peaks in a histogram are to be distinguished, is carefully studied. In particular, the probability r 1 for a nuclear reaction to end up in one out of two overlapping peaks is studied. Synthetic data are used to investigate effects of linearizations and other assumptions. For perfect Gaussian peaks, it is seen that the estimated parameters are distributed close to the truth with good covariance estimates. This assumes that the method is applied correctly; for example, prior knowledge should be implemented using a prior distribution and not by assuming that some parameters are perfectly known (if they are not). It is also important to update the data covariance matrix using the fit if the uncertainties depend on the expected value of the data (e.g., for Poisson counting statistics or relative uncertainties). If a model defect is added to the peaks, such that their shape is unknown, a fit which assumes perfect Gaussian peaks becomes unable to reproduce the data, and the results for r 1 become biased. It is, however, seen that it is possible to treat the model defect with a Gaussian process with a covariance function tailored for the situation, with hyper-parameters determined by leave-one-out cross validation. The resulting estimates for r 1 are virtually unbiased, and the uncertainty estimates agree very well with the underlying uncertainty.

  11. Efficiency of patients with carcinoma and acceptance of the disease

    Directory of Open Access Journals (Sweden)

    Marzena Kamińska

    2014-04-01

    Full Text Available Introduction: Human functioning is based on physical, psychological, social and spiritual areas. The emergence of cancer and all types of problems affect these areas. Adapting to cancer is very important for the process of therapy, and acceptance of the disease is its determinant. Aim of the research study : To determine the relationship between oncological patients physical fitness and their acceptance of the disease. Material and methods: The following research techniques and tools have been used: a questionnaire survey, the Repta operation scale for assessing the functionality of patients in the course of the disease, a modified Pain Assessment Worksheet for evaluating the intensity of pain and its impact on daily activities and the AIS scale to assess the degree of acceptance of the disease. Results: Most of the respondents were fully efficient in the field of the activities of daily living. The vast majority of respondents did not feel pain, or felt pain that could be taken lightly. Pain that made daily functioning difficult, particularly in mobility and locomotion, concerned only persons over 60 years old. In the study group there was dominantly an average degree of acceptance of the disease; a small group was marked by a high level, and only a few people showed a lack of acceptance of the disease. Independent people and people in need of assistance accepted the illness at a medium level, and vulnerable patients showed the lowest level of acceptance. Conclusions : The efficiency of patients with cancer affects the level of acceptance of the disease. Cancer for the majority of respondents is not an obstacle in performing basic activities. Most respondents accept the disease, a small part selects a high level, and only a few people show a lack of acceptance of the disease.

  12. Maximum likelihood fitting of FROC curves under an initial-detection-and-candidate-analysis model

    International Nuclear Information System (INIS)

    Edwards, Darrin C.; Kupinski, Matthew A.; Metz, Charles E.; Nishikawa, Robert M.

    2002-01-01

    We have developed a model for FROC curve fitting that relates the observer's FROC performance not to the ROC performance that would be obtained if the observer's responses were scored on a per image basis, but rather to a hypothesized ROC performance that the observer would obtain in the task of classifying a set of 'candidate detections' as positive or negative. We adopt the assumptions of the Bunch FROC model, namely that the observer's detections are all mutually independent, as well as assumptions qualitatively similar to, but different in nature from, those made by Chakraborty in his AFROC scoring methodology. Under the assumptions of our model, we show that the observer's FROC performance is a linearly scaled version of the candidate analysis ROC curve, where the scaling factors are just given by the FROC operating point coordinates for detecting initial candidates. Further, we show that the likelihood function of the model parameters given observational data takes on a simple form, and we develop a maximum likelihood method for fitting a FROC curve to this data. FROC and AFROC curves are produced for computer vision observer datasets and compared with the results of the AFROC scoring method. Although developed primarily with computer vision schemes in mind, we hope that the methodology presented here will prove worthy of further study in other applications as well

  13. "Like Holding an Umbrella Before It Rains": Acceptability of Future Rectal Microbicides Among Men Who Have Sex With Men in India-A Modified Technology Acceptance Model.

    Science.gov (United States)

    Chakrapani, Venkatesan; Newman, Peter A; Shunmugam, Murali; Mengle, Shruta; Nelson, Ruban; Rubincam, Clara; Kumar, Pushpesh

    2017-07-01

    Topical rectal microbicides (RMs) are a new prevention technology in development that aims to reduce the risk of HIV acquisition from anal sex. We examined RM acceptability among men who have sex with men (MSM) in India. We conducted a qualitative exploratory study guided by a modified Technology Acceptance Model, with 10 focus groups ( n = 61) of MSM and 10 key informant interviews. Data were explored using framework analysis. RM acceptability was influenced by technological contexts: perceived usefulness of RMs, perceived ease of use of RM and applicator, and habits around condom and lubricant use; individual and interpersonal contexts: perceived relevance and preferences for product formulation and dosing frequency; and MSM community/social contexts: perceived social approval, RM-related stigma, social support. Implementation of RMs for MSM in India may be supported by multi-level interventions that engage community-based organizations in destigmatizing and distributing RMs, ideally gel-based products that enable on-demand use before sex.

  14. Quantifying and Reducing Curve-Fitting Uncertainty in Isc

    Energy Technology Data Exchange (ETDEWEB)

    Campanelli, Mark; Duck, Benjamin; Emery, Keith

    2015-06-14

    Current-voltage (I-V) curve measurements of photovoltaic (PV) devices are used to determine performance parameters and to establish traceable calibration chains. Measurement standards specify localized curve fitting methods, e.g., straight-line interpolation/extrapolation of the I-V curve points near short-circuit current, Isc. By considering such fits as statistical linear regressions, uncertainties in the performance parameters are readily quantified. However, the legitimacy of such a computed uncertainty requires that the model be a valid (local) representation of the I-V curve and that the noise be sufficiently well characterized. Using more data points often has the advantage of lowering the uncertainty. However, more data points can make the uncertainty in the fit arbitrarily small, and this fit uncertainty misses the dominant residual uncertainty due to so-called model discrepancy. Using objective Bayesian linear regression for straight-line fits for Isc, we investigate an evidence-based method to automatically choose data windows of I-V points with reduced model discrepancy. We also investigate noise effects. Uncertainties, aligned with the Guide to the Expression of Uncertainty in Measurement (GUM), are quantified throughout.

  15. Fitting monthly Peninsula Malaysian rainfall using Tweedie distribution

    Science.gov (United States)

    Yunus, R. M.; Hasan, M. M.; Zubairi, Y. Z.

    2017-09-01

    In this study, the Tweedie distribution was used to fit the monthly rainfall data from 24 monitoring stations of Peninsula Malaysia for the period from January, 2008 to April, 2015. The aim of the study is to determine whether the distributions within the Tweedie family fit well the monthly Malaysian rainfall data. Within the Tweedie family, the gamma distribution is generally used for fitting the rainfall totals, however the Poisson-gamma distribution is more useful to describe two important features of rainfall pattern, which are the occurrences (dry months) and the amount (wet months). First, the appropriate distribution of the monthly rainfall was identified within the Tweedie family for each station. Then, the Tweedie Generalised Linear Model (GLM) with no explanatory variable was used to model the monthly rainfall data. Graphical representation was used to assess model appropriateness. The QQ plots of quantile residuals show that the Tweedie models fit the monthly rainfall data better for majority of the stations in the west coast and mid land than those in the east coast of Peninsula. This significant finding suggests that the best fitted distribution depends on the geographical location of the monitoring station. In this paper, a simple model is developed for generating synthetic rainfall data for use in various areas, including agriculture and irrigation. We have showed that the data that were simulated using the Tweedie distribution have fairly similar frequency histogram to that of the actual data. Both the mean number of rainfall events and mean amount of rain for a month were estimated simultaneously for the case that the Poisson gamma distribution fits the data reasonably well. Thus, this work complements previous studies that fit the rainfall amount and the occurrence of rainfall events separately, each to a different distribution.

  16. A Bayesian Approach to Person Fit Analysis in Item Response Theory Models. Research Report.

    Science.gov (United States)

    Glas, Cees A. W.; Meijer, Rob R.

    A Bayesian approach to the evaluation of person fit in item response theory (IRT) models is presented. In a posterior predictive check, the observed value on a discrepancy variable is positioned in its posterior distribution. In a Bayesian framework, a Markov Chain Monte Carlo procedure can be used to generate samples of the posterior distribution…

  17. An extension of technology acceptance model to determine factors that influence the intention to use electronic collection system in Nigerian federal hospitals

    Science.gov (United States)

    Kabir, Muhammad Auwal; Saidin, Siti Zabedah; Ahmi, Aidi

    2017-10-01

    The aim of this paper is to develop a conceptual framework that would be used in determining the factors that influence the behavioral intention to use electronic collection system in federal government owned hospitals in Nigeria. The framework is supported by Technology Acceptance Model (TAM) as the underlying theory of the study. Past literature on individual user intention were thoroughly reviewed and found that TAM is fit appropriate in explaining the phenomenon under study. Based on the reviewed literature, it is expected that perceived usefulness and perceived ease of use will influence the intention of users (employees) to use e-collection system in the performance of their job tasks in Nigerian federal hospitals. In other words, users with higher perception on the system's usefulness and its ease of use are more likely to express their interest and willingness to use the system. In addition, the study has extended TAM with facilitating conditions construct and the research is expected to discover the level of its influence on behavioral intention to use e-collection system.

  18. GRace: a MATLAB-based application for fitting the discrimination-association model.

    Science.gov (United States)

    Stefanutti, Luca; Vianello, Michelangelo; Anselmi, Pasquale; Robusto, Egidio

    2014-10-28

    The Implicit Association Test (IAT) is a computerized two-choice discrimination task in which stimuli have to be categorized as belonging to target categories or attribute categories by pressing, as quickly and accurately as possible, one of two response keys. The discrimination association model has been recently proposed for the analysis of reaction time and accuracy of an individual respondent to the IAT. The model disentangles the influences of three qualitatively different components on the responses to the IAT: stimuli discrimination, automatic association, and termination criterion. The article presents General Race (GRace), a MATLAB-based application for fitting the discrimination association model to IAT data. GRace has been developed for Windows as a standalone application. It is user-friendly and does not require any programming experience. The use of GRace is illustrated on the data of a Coca Cola-Pepsi Cola IAT, and the results of the analysis are interpreted and discussed.

  19. Comparison of marginal and internal fit of 3-unit ceramic fixed dental prostheses made with either a conventional or digital impression.

    Science.gov (United States)

    Su, Ting-Shu; Sun, Jian

    2016-09-01

    For 20 years, the intraoral digital impression technique has been applied to the fabrication of computer aided design and computer aided manufacturing (CAD-CAM) fixed dental prostheses (FDPs). Clinical fit is one of the main determinants of the success of an FDP. Studies of the clinical fit of 3-unit ceramic FDPs made by means of a conventional impression versus a digital impression technology are limited. The purpose of this in vitro study was to evaluate and compare the internal fit and marginal fit of CAD-CAM, 3-unit ceramic FDP frameworks fabricated from an intraoral digital impression and a conventional impression. A standard model was designed for a prepared maxillary left canine and second premolar and missing first premolar. The model was scanned with an intraoral digital scanner, exporting stereolithography (STL) files as the experimental group (digital group). The model was used to fabricate 10 stone casts that were scanned with an extraoral scanner, exporting STL files to a computer connected to the scanner as the control group (conventional group). The STL files were used to produce zirconia FDP frameworks with CAD-CAM. These frameworks were seated on the standard model and evaluated for marginal and internal fit. Each framework was segmented into 4 sections per abutment teeth, resulting in 8 sections per framework, and was observed using optical microscopy with ×50 magnification. Four measurement points were selected on each section as marginal discrepancy (P1), mid-axial wall (P2), axio-occusal edge (P3), and central-occlusal point (P4). Mean marginal fit values of the digital group (64 ±16 μm) were significantly smaller than those of the conventional group (76 ±18 μm) (Pdigital group (111 ±34 μm) were significantly smaller than those of the conventional group (132 ±44 μm) (Pdigital and conventional impressions showed clinically acceptable marginal and internal fit. The marginal and internal fit of frameworks fabricated from the intraoral

  20. A CAD System for Evaluating Footwear Fit

    Science.gov (United States)

    Savadkoohi, Bita Ture; de Amicis, Raffaele

    With the great growth in footwear demand, the footwear manufacturing industry, for achieving commercial success, must be able to provide the footwear that fulfills consumer's requirement better than it's competitors. Accurate fitting for shoes is an important factor in comfort and functionality. Footwear fitter measurement have been using manual measurement for a long time, but the development of 3D acquisition devices and the advent of powerful 3D visualization and modeling techniques, automatically analyzing, searching and interpretation of the models have now made automatic determination of different foot dimensions feasible. In this paper, we proposed an approach for finding footwear fit within the shoe last data base. We first properly aligned the 3D models using "Weighted" Principle Component Analysis (WPCA). After solving the alignment problem we used an efficient algorithm for cutting the 3D model in order to find the footwear fit from shoe last data base.

  1. Psychosocial determinants of disease acceptance in selected mental disorders.

    Science.gov (United States)

    Bogusz, Renata; Humeniuk, Ewa

    2017-12-23

    Every mental disorder may cause a number of negative consequences in the personal lives of the patients and their families as well as in their social relations. Acceptance of the disease is a crucial factor in the process of coping with the problems resulting from it. Acceptance of the disease may significantly influence the reduction of negative emotional reactions it causes. Consequently, it may contribute to better adaptation of the patients and hence may facilitate the process of recovery. The study attempts to define the socio-psychological conditioning of the degree of disease acceptance among patients treated for psychical disorders. Opinion surveys were carried out in 2013 among a group of 240 patients treated in Mental Health Clinic in Chełm, eastern Poland. The study applied Acceptance Illness Scale - AIS B. Felton, T. A. Revenson, G.A. Hinrichsen, adapted in Poland by Z. Juczyński, as well as a socio-demographic questionnaire. The analysis of the obtained results revealed a similar level of acceptance of such diseases as anxiety disorders (24.41±8.52), depression (22.80±7.51) and personality disorders (23.89±7.89). The medical records of all patients fitted among the low average. The greatest problem in the researched group related to the social consequences of the psychical disorders. Those questioned were afraid of the negative reactions of others and of being a burden to their families. The level of acceptance was not correlated with independent variables (age, gender, education, place of residence, general well-being).

  2. The Many Null Distributions of Person Fit Indices.

    Science.gov (United States)

    Molenaar, Ivo W.; Hoijtink, Herbert

    1990-01-01

    Statistical properties of person fit indices are reviewed as indicators of the extent to which a person's score pattern is in agreement with a measurement model. Distribution of a fit index and ability-free fit evaluation are discussed. The null distribution was simulated for a test of 20 items. (SLD)

  3. Inverse problem theory methods for data fitting and model parameter estimation

    CERN Document Server

    Tarantola, A

    2002-01-01

    Inverse Problem Theory is written for physicists, geophysicists and all scientists facing the problem of quantitative interpretation of experimental data. Although it contains a lot of mathematics, it is not intended as a mathematical book, but rather tries to explain how a method of acquisition of information can be applied to the actual world.The book provides a comprehensive, up-to-date description of the methods to be used for fitting experimental data, or to estimate model parameters, and to unify these methods into the Inverse Problem Theory. The first part of the book deals wi

  4. Black Versus Gray T-Shirts: Comparison of Spectrophotometric and Other Biophysical Properties of Physical Fitness Uniforms and Modeled Heat Strain and Thermal Comfort

    Science.gov (United States)

    2016-09-01

    PROPERTIES OF PHYSICAL FITNESS UNIFORMS AND MODELED HEAT STRAIN AND THERMAL COMFORT DISCLAIMER The opinions or assertions contained herein are the...SHIRTS: COMPARISON OF SPECTROPHOTOMETRIC AND OTHER BIOPHYSICAL PROPERTIES OF PHYSICAL FITNESS UNIFORMS AND MODELED HEAT STRAIN AND THERMAL COMFORT ...the impact of the environment on the wearer. To model these impacts on human thermal sensation (e.g., thermal comfort ) and thermoregulatory

  5. Virtual Suit Fit Assessment Using Body Shape Model

    Data.gov (United States)

    National Aeronautics and Space Administration — Shoulder injury is one of the most serious risks for crewmembers in long-duration spaceflight. While suboptimal suit fit and contact pressures between the shoulder...

  6. Modeling the acceptance of clinical information systems among hospital medical staff: an extended TAM model.

    Science.gov (United States)

    Melas, Christos D; Zampetakis, Leonidas A; Dimopoulou, Anastasia; Moustakis, Vassilis

    2011-08-01

    Recent empirical research has utilized the Technology Acceptance Model (TAM) to advance the understanding of doctors' and nurses' technology acceptance in the workplace. However, the majority of the reported studies are either qualitative in nature or use small convenience samples of medical staff. Additionally, in very few studies moderators are either used or assessed despite their importance in TAM based research. The present study focuses on the application of TAM in order to explain the intention to use clinical information systems, in a random sample of 604 medical staff (534 physicians) working in 14 hospitals in Greece. We introduce physicians' specialty as a moderator in TAM and test medical staff's information and communication technology (ICT) knowledge and ICT feature demands, as external variables. The results show that TAM predicts a substantial proportion of the intention to use clinical information systems. Findings make a contribution to the literature by replicating, explaining and advancing the TAM, whereas theory is benefited by the addition of external variables and medical specialty as a moderator. Recommendations for further research are discussed. Copyright © 2011 Elsevier Inc. All rights reserved.

  7. Combining choice experiments with psychometric scales to assess the social acceptability of wind energy projects: A latent class approach

    International Nuclear Information System (INIS)

    Strazzera, Elisabetta; Mura, Marina; Contu, Davide

    2012-01-01

    A choice experiment exercise is combined with psychometric scales in order: (1) to identify factors that explain support/opposition toward a wind energy development project; and (2) to assess (monetary) trade-offs between attributes of the project. A Latent Class estimator is fitted to the data, and different utility parameters are estimated, conditional on class allocation. It is found that the probability of class membership depends on specific psychometric variables. Visual impacts on valued sites are an important factor of opposition toward a project, and this effect is magnified when identity values are attached to the specific site, so much that no trade-off would be acceptable for a class of individuals characterized by strong place attachment. Conversely, other classes of individuals are willing to accept compensations, in form of private and/or public benefits. The distribution of benefits in the territory, and preservation of the option value related to the possible development of an archeological site, are important for a class of individuals concerned with the sustainability of the local economy. - Highlights: ► A Choice Experiment approach is used to assess acceptability of a wind farm project. ► Psychometric variables are used to model heterogeneity in a Latent Class model. ► No trade-off would be acceptable for a class of individuals. ► Another class of individuals is interested in private benefits. ► Other classes are interested in public benefits and sustainability of the development.

  8. Two-Stage Method Based on Local Polynomial Fitting for a Linear Heteroscedastic Regression Model and Its Application in Economics

    Directory of Open Access Journals (Sweden)

    Liyun Su

    2012-01-01

    Full Text Available We introduce the extension of local polynomial fitting to the linear heteroscedastic regression model. Firstly, the local polynomial fitting is applied to estimate heteroscedastic function, then the coefficients of regression model are obtained by using generalized least squares method. One noteworthy feature of our approach is that we avoid the testing for heteroscedasticity by improving the traditional two-stage method. Due to nonparametric technique of local polynomial estimation, we do not need to know the heteroscedastic function. Therefore, we can improve the estimation precision, when the heteroscedastic function is unknown. Furthermore, we focus on comparison of parameters and reach an optimal fitting. Besides, we verify the asymptotic normality of parameters based on numerical simulations. Finally, this approach is applied to a case of economics, and it indicates that our method is surely effective in finite-sample situations.

  9. Convolution based profile fitting

    International Nuclear Information System (INIS)

    Kern, A.; Coelho, A.A.; Cheary, R.W.

    2002-01-01

    Full text: In convolution based profile fitting, profiles are generated by convoluting functions together to form the observed profile shape. For a convolution of 'n' functions this process can be written as, Y(2θ)=F 1 (2θ)x F 2 (2θ)x... x F i (2θ)x....xF n (2θ). In powder diffractometry the functions F i (2θ) can be interpreted as the aberration functions of the diffractometer, but in general any combination of appropriate functions for F i (2θ) may be used in this context. Most direct convolution fitting methods are restricted to combinations of F i (2θ) that can be convoluted analytically (e.g. GSAS) such as Lorentzians, Gaussians, the hat (impulse) function and the exponential function. However, software such as TOPAS is now available that can accurately convolute and refine a wide variety of profile shapes numerically, including user defined profiles, without the need to convolute analytically. Some of the most important advantages of modern convolution based profile fitting are: 1) virtually any peak shape and angle dependence can normally be described using minimal profile parameters in laboratory and synchrotron X-ray data as well as in CW and TOF neutron data. This is possible because numerical convolution and numerical differentiation is used within the refinement procedure so that a wide range of functions can easily be incorporated into the convolution equation; 2) it can use physically based diffractometer models by convoluting the instrument aberration functions. This can be done for most laboratory based X-ray powder diffractometer configurations including conventional divergent beam instruments, parallel beam instruments, and diffractometers used for asymmetric diffraction. It can also accommodate various optical elements (e.g. multilayers and monochromators) and detector systems (e.g. point and position sensitive detectors) and has already been applied to neutron powder diffraction systems (e.g. ANSTO) as well as synchrotron based

  10. Antecedents to Consumers' Acceptance of Mobile Advertisements

    DEFF Research Database (Denmark)

    Rajala, Risto; Westerlund, Mika

    2010-01-01

    The paper presents a hierarchical construct PLS structural equation model to analyze mobile advertisement acceptance. Hypotheses are established and tested about the hierarchical structure and the effects of the factors that precede consumers' behavioral intention to accept mobile advertisement....... The results suggest that valuable content and trust in advertisers are key predictors of mobile device users' acceptance of mobile advertising. In addition, subjective value of the ads and subjective norms mediate these antecedent-acceptance relationships. The results are invaluable to both scholars...

  11. Fitting outbreak models to data from many small norovirus outbreaks

    Directory of Open Access Journals (Sweden)

    Eamon B. O’Dea

    2014-03-01

    Full Text Available Infectious disease often occurs in small, independent outbreaks in populations with varying characteristics. Each outbreak by itself may provide too little information for accurate estimation of epidemic model parameters. Here we show that using standard stochastic epidemic models for each outbreak and allowing parameters to vary between outbreaks according to a linear predictor leads to a generalized linear model that accurately estimates parameters from many small and diverse outbreaks. By estimating initial growth rates in addition to transmission rates, we are able to characterize variation in numbers of initially susceptible individuals or contact patterns between outbreaks. With simulation, we find that the estimates are fairly robust to the data being collected at discrete intervals and imputation of about half of all infectious periods. We apply the method by fitting data from 75 norovirus outbreaks in health-care settings. Our baseline regression estimates are 0.0037 transmissions per infective-susceptible day, an initial growth rate of 0.27 transmissions per infective day, and a symptomatic period of 3.35 days. Outbreaks in long-term-care facilities had significantly higher transmission and initial growth rates than outbreaks in hospitals.

  12. Minimal see-saw model predicting best fit lepton mixing angles

    International Nuclear Information System (INIS)

    King, Stephen F.

    2013-01-01

    We discuss a minimal predictive see-saw model in which the right-handed neutrino mainly responsible for the atmospheric neutrino mass has couplings to (ν e ,ν μ ,ν τ ) proportional to (0,1,1) and the right-handed neutrino mainly responsible for the solar neutrino mass has couplings to (ν e ,ν μ ,ν τ ) proportional to (1,4,2), with a relative phase η=−2π/5. We show how these patterns of couplings could arise from an A 4 family symmetry model of leptons, together with Z 3 and Z 5 symmetries which fix η=−2π/5 up to a discrete phase choice. The PMNS matrix is then completely determined by one remaining parameter which is used to fix the neutrino mass ratio m 2 /m 3 . The model predicts the lepton mixing angles θ 12 ≈34 ∘ ,θ 23 ≈41 ∘ ,θ 13 ≈9.5 ∘ , which exactly coincide with the current best fit values for a normal neutrino mass hierarchy, together with the distinctive prediction for the CP violating oscillation phase δ≈106 ∘

  13. An Elaboration Likelihood Model Based Longitudinal Analysis of Attitude Change during the Process of IT Acceptance via Education Program

    Science.gov (United States)

    Lee, Woong-Kyu

    2012-01-01

    The principal objective of this study was to gain insight into attitude changes occurring during IT acceptance from the perspective of elaboration likelihood model (ELM). In particular, the primary target of this study was the process of IT acceptance through an education program. Although the Internet and computers are now quite ubiquitous, and…

  14. GENFIT - a generic track-fitting toolkit

    Energy Technology Data Exchange (ETDEWEB)

    Rauch, Johannes [Technische Universitaet Muenchen (Germany); Schlueter, Tobias [Ludwig-Maximilians-Universitaet Muenchen (Germany)

    2014-07-01

    GENFIT is an experiment-independent track-fitting toolkit, which combines fitting algorithms, track representations, and measurement geometries into a modular framework. We report on a significantly improved version of GENFIT, based on experience gained in the Belle II, PANDA, and FOPI experiments. Improvements concern the implementation of additional track-fitting algorithms, enhanced implementations of Kalman fitters, enhanced visualization capabilities, and additional implementations of measurement types suited for various kinds of tracking detectors. The data model has been revised, allowing for efficient track merging, smoothing, residual calculation and alignment.

  15. New ROOT Graphical User Interfaces for fitting

    International Nuclear Information System (INIS)

    Maline, D Gonzalez; Moneta, L; Antcheva, I

    2010-01-01

    ROOT, as a scientific data analysis framework, provides extensive capabilities via Graphical User Interfaces (GUI) for performing interactive analysis and visualizing data objects like histograms and graphs. A new interface for fitting has been developed for performing, exploring and comparing fits on data point sets such as histograms, multi-dimensional graphs or trees. With this new interface, users can build interactively the fit model function, set parameter values and constraints and select fit and minimization methods with their options. Functionality for visualizing the fit results is as well provided, with the possibility of drawing residuals or confidence intervals. Furthermore, the new fit panel reacts as a standalone application and it does not prevent users from interacting with other windows. We will describe in great detail the functionality of this user interface, covering as well new capabilities provided by the new fitting and minimization tools introduced recently in the ROOT framework.

  16. Levy flights and self-similar exploratory behaviour of termite workers: beyond model fitting.

    Directory of Open Access Journals (Sweden)

    Octavio Miramontes

    Full Text Available Animal movements have been related to optimal foraging strategies where self-similar trajectories are central. Most of the experimental studies done so far have focused mainly on fitting statistical models to data in order to test for movement patterns described by power-laws. Here we show by analyzing over half a million movement displacements that isolated termite workers actually exhibit a range of very interesting dynamical properties--including Lévy flights--in their exploratory behaviour. Going beyond the current trend of statistical model fitting alone, our study analyses anomalous diffusion and structure functions to estimate values of the scaling exponents describing displacement statistics. We evince the fractal nature of the movement patterns and show how the scaling exponents describing termite space exploration intriguingly comply with mathematical relations found in the physics of transport phenomena. By doing this, we rescue a rich variety of physical and biological phenomenology that can be potentially important and meaningful for the study of complex animal behavior and, in particular, for the study of how patterns of exploratory behaviour of individual social insects may impact not only their feeding demands but also nestmate encounter patterns and, hence, their dynamics at the social scale.

  17. Modelling Facebook Usage among University Students in Thailand: The Role of Emotional Attachment in an Extended Technology Acceptance Model

    Science.gov (United States)

    Teo, Timothy

    2016-01-01

    The aim of this study is to examine the factors that influenced the use of Facebook among university students. Using an extended technology acceptance model (TAM) with emotional attachment (EA) as an external variable, a sample of 498 students from a public-funded Thailand university were surveyed on their responses to five variables hypothesized…

  18. Innovation Rather than Improvement: A Solvable High-Dimensional Model Highlights the Limitations of Scalar Fitness

    Science.gov (United States)

    Tikhonov, Mikhail; Monasson, Remi

    2018-01-01

    Much of our understanding of ecological and evolutionary mechanisms derives from analysis of low-dimensional models: with few interacting species, or few axes defining "fitness". It is not always clear to what extent the intuition derived from low-dimensional models applies to the complex, high-dimensional reality. For instance, most naturally occurring microbial communities are strikingly diverse, harboring a large number of coexisting species, each of which contributes to shaping the environment of others. Understanding the eco-evolutionary interplay in these systems is an important challenge, and an exciting new domain for statistical physics. Recent work identified a promising new platform for investigating highly diverse ecosystems, based on the classic resource competition model of MacArthur. Here, we describe how the same analytical framework can be used to study evolutionary questions. Our analysis illustrates how, at high dimension, the intuition promoted by a one-dimensional (scalar) notion of fitness can become misleading. Specifically, while the low-dimensional picture emphasizes organism cost or efficiency, we exhibit a regime where cost becomes irrelevant for survival, and link this observation to generic properties of high-dimensional geometry.

  19. A bipartite fitness model for online music streaming services

    Science.gov (United States)

    Pongnumkul, Suchit; Motohashi, Kazuyuki

    2018-01-01

    This paper proposes an evolution model and an analysis of the behavior of music consumers on online music streaming services. While previous studies have observed power-law degree distributions of usage in online music streaming services, the underlying behavior of users has not been well understood. Users and songs can be described using a bipartite network where an edge exists between a user node and a song node when the user has listened that song. The growth mechanism of bipartite networks has been used to understand the evolution of online bipartite networks Zhang et al. (2013). Existing bipartite models are based on a preferential attachment mechanism László Barabási and Albert (1999) in which the probability that a user listens to a song is proportional to its current popularity. This mechanism does not allow for two types of real world phenomena. First, a newly released song with high quality sometimes quickly gains popularity. Second, the popularity of songs normally decreases as time goes by. Therefore, this paper proposes a new model that is more suitable for online music services by adding fitness and aging functions to the song nodes of the bipartite network proposed by Zhang et al. (2013). Theoretical analyses are performed for the degree distribution of songs. Empirical data from an online streaming service, Last.fm, are used to confirm the degree distribution of the object nodes. Simulation results show improvements from a previous model. Finally, to illustrate the application of the proposed model, a simplified royalty cost model for online music services is used to demonstrate how the changes in the proposed parameters can affect the costs for online music streaming providers. Managerial implications are also discussed.

  20. ACCELERATED FITTING OF STELLAR SPECTRA

    Energy Technology Data Exchange (ETDEWEB)

    Ting, Yuan-Sen; Conroy, Charlie [Harvard–Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Rix, Hans-Walter [Max Planck Institute for Astronomy, Königstuhl 17, D-69117 Heidelberg (Germany)

    2016-07-20

    Stellar spectra are often modeled and fitted by interpolating within a rectilinear grid of synthetic spectra to derive the stars’ labels: stellar parameters and elemental abundances. However, the number of synthetic spectra needed for a rectilinear grid grows exponentially with the label space dimensions, precluding the simultaneous and self-consistent fitting of more than a few elemental abundances. Shortcuts such as fitting subsets of labels separately can introduce unknown systematics and do not produce correct error covariances in the derived labels. In this paper we present a new approach—Convex Hull Adaptive Tessellation (chat)—which includes several new ideas for inexpensively generating a sufficient stellar synthetic library, using linear algebra and the concept of an adaptive, data-driven grid. A convex hull approximates the region where the data lie in the label space. A variety of tests with mock data sets demonstrate that chat can reduce the number of required synthetic model calculations by three orders of magnitude in an eight-dimensional label space. The reduction will be even larger for higher dimensional label spaces. In chat the computational effort increases only linearly with the number of labels that are fit simultaneously. Around each of these grid points in the label space an approximate synthetic spectrum can be generated through linear expansion using a set of “gradient spectra” that represent flux derivatives at every wavelength point with respect to all labels. These techniques provide new opportunities to fit the full stellar spectra from large surveys with 15–30 labels simultaneously.

  1. Examining Information Technology Acceptance by Individual Professionals

    Directory of Open Access Journals (Sweden)

    Licen Indahwati Darsono

    2005-06-01

    Full Text Available The mixed results of information technology (IT investment have made the investigation of user acceptance of IT increasingly challenging. A growing body of research in user acceptance of IT literature has limited focus on individual professionals as target users. Therefore, this research investigates how external variables, namely individual differences and system characteristics influence lecturers as individual professionals to accept the internet technology. Technology Acceptance Model (TAM and Theory of Planned Behavior (TPB are used as the main reference in this research. Findings of this research indicate that individual differences (computer self-efficacy, knowledge of search domain and system characteristics (terminology, screen design, relevance have indirect impact through perceived ease of use, perceived usefulness, and attitude on lecturers’ intention to use the internet. Specifically, computer self-efficacy and screen design have direct and indirect impact on intention. One issue concerning with the explanatory power of the proposed research model, which is based on TAM and TPB, compared to the rival model, which is called extended TAM, is also analyzed.

  2. A simulation-based goodness-of-fit test for random effects in generalized linear mixed models

    DEFF Research Database (Denmark)

    Waagepetersen, Rasmus

    2006-01-01

    The goodness-of-fit of the distribution of random effects in a generalized linear mixed model is assessed using a conditional simulation of the random effects conditional on the observations. Provided that the specified joint model for random effects and observations is correct, the marginal...... distribution of the simulated random effects coincides with the assumed random effects distribution. In practice, the specified model depends on some unknown parameter which is replaced by an estimate. We obtain a correction for this by deriving the asymptotic distribution of the empirical distribution...

  3. A simulation-based goodness-of-fit test for random effects in generalized linear mixed models

    DEFF Research Database (Denmark)

    Waagepetersen, Rasmus Plenge

    The goodness-of-fit of the distribution of random effects in a generalized linear mixed model is assessed using a conditional simulation of the random effects conditional on the observations. Provided that the specified joint model for random effects and observations is correct, the marginal...... distribution of the simulated random effects coincides with the assumed random effects distribution. In practice the specified model depends on some unknown parameter which is replaced by an estimate. We obtain a correction for this by deriving the asymptotic distribution of the empirical distribution function...

  4. Introduction: Occam’s Razor (SOT - Fit for Purpose workshop introduction)

    Science.gov (United States)

    Mathematical models provide important, reproducible, and transparent information for risk-based decision making. However, these models must be constructed to fit the needs of the problem to be solved. A “fit for purpose” model is an abstraction of a complicated problem that allow...

  5. User acceptance of mobile health services from users' perspectives: The role of self-efficacy and response-efficacy in technology acceptance.

    Science.gov (United States)

    Zhang, Xiaofei; Han, Xiaocui; Dang, Yuanyuan; Meng, Fanbo; Guo, Xitong; Lin, Jiayue

    2017-03-01

    With the swift emergence of electronic medical information, the global popularity of mobile health (mHealth) services continues to increase steadily. This study aims to investigate the efficacy factors that directly or indirectly influence individuals' acceptance of mHealth services. Based on the technology acceptance model, this research incorporates efficacy factors into the acceptance decision process. A research model was proposed involving the direct and indirect effects of self-efficacy and response-efficacy on acceptance intention, along with their moderating effects. The model and hypotheses were validated using data collected from a field survey of 650 potential service users. The results reveal that: (1) self-efficacy and response-efficacy are both positively associated with perceived ease of use; and (2) self-efficacy and response-efficacy moderate the impact of perceived usefulness toward adoption intention. Self-efficacy and response-efficacy both play an important role in individuals' acceptance of mHealth services, which not only affect their perceived ease of use of mHealth services, but also positively moderate the effects of perceived usefulness on adoption intention. Our findings serve to provide recommendations that are specifically customized for mHealth service providers and their marketers.

  6. Measuring the Moderating Effect of Gender and Age on E-Learning Acceptance in England: A Structural Equation Modeling Approach for an Extended Technology Acceptance Model

    Science.gov (United States)

    Tarhini, Ali; Hone, Kate; Liu, Xiaohui

    2014-01-01

    The success of an e-learning intervention depends to a considerable extent on student acceptance and use of the technology. Therefore, it has become imperative for practitioners and policymakers to understand the factors affecting the user acceptance of e-learning systems in order to enhance the students' learning experience. Based on an extended…

  7. VizieR Online Data Catalog: GRB prompt emission fitted with the DREAM model (Ahlgren+, 2015)

    Science.gov (United States)

    Ahlgren, B.; Larsson, J.; Nymark, T.; Ryde, F.; Pe'Er, A.

    2018-01-01

    We illustrate the application of the DREAM model by fitting it to two different, bright Fermi GRBs; GRB 090618 and GRB 100724B. While GRB 090618 is well fitted by a Band function, GRB 100724B was the first example of a burst with a significant additional BB component (Guiriec et al. 2011ApJ...727L..33G). GRB 090618 is analysed using Gamma-ray Burst Monitor (GBM) data (Meegan et al. 2009ApJ...702..791M) from the NaI and BGO detectors. For GRB 100724B, we used GBM data from the NaI and BGO detectors as well as Large Area Telescope Low Energy (LAT-LLE) data. For both bursts we selected NaI detectors seeing the GRB at an off-axis angle lower than 60° and the BGO detector as being the best aligned of the two BGO detectors. The spectra were fitted in the energy ranges 8-1000 keV (NaI), 200-40000 keV (BGO) and 30-1000 MeV (LAT-LLE). (2 data files).

  8. Key factors of teenagers' mobile advertising acceptance

    OpenAIRE

    Martí Parreño, José; Sanz Blas, Silvia; Ruiz Mafé, Carla; Aldás Manzano, Joaquín

    2013-01-01

    Purpose – The purpose of this paper is to analyse key drivers of teenagers’ attitude toward mobile advertising and its effects on teenagers’ mobile advertising acceptance. Design/methodology/approach – A proposed model of affective (irritation and entertainment) and cognitive (perceived usefulness) antecedents of attitude toward mobile advertising and its effects on mobile advertising acceptance is analysed. The sample consisted of 355 Spanish teenagers. The model was tested us...

  9. Human X-chromosome inactivation pattern distributions fit a model of genetically influenced choice better than models of completely random choice

    Science.gov (United States)

    Renault, Nisa K E; Pritchett, Sonja M; Howell, Robin E; Greer, Wenda L; Sapienza, Carmen; Ørstavik, Karen Helene; Hamilton, David C

    2013-01-01

    In eutherian mammals, one X-chromosome in every XX somatic cell is transcriptionally silenced through the process of X-chromosome inactivation (XCI). Females are thus functional mosaics, where some cells express genes from the paternal X, and the others from the maternal X. The relative abundance of the two cell populations (X-inactivation pattern, XIP) can have significant medical implications for some females. In mice, the ‘choice' of which X to inactivate, maternal or paternal, in each cell of the early embryo is genetically influenced. In humans, the timing of XCI choice and whether choice occurs completely randomly or under a genetic influence is debated. Here, we explore these questions by analysing the distribution of XIPs in large populations of normal females. Models were generated to predict XIP distributions resulting from completely random or genetically influenced choice. Each model describes the discrete primary distribution at the onset of XCI, and the continuous secondary distribution accounting for changes to the XIP as a result of development and ageing. Statistical methods are used to compare models with empirical data from Danish and Utah populations. A rigorous data treatment strategy maximises information content and allows for unbiased use of unphased XIP data. The Anderson–Darling goodness-of-fit statistics and likelihood ratio tests indicate that a model of genetically influenced XCI choice better fits the empirical data than models of completely random choice. PMID:23652377

  10. Comments on Ghassib's "Where Does Creativity Fit into a Productivist Industrial Model of Knowledge Production?"

    Science.gov (United States)

    McCluskey, Ken W.

    2010-01-01

    This article presents the author's comments on Hisham B. Ghassib's "Where Does Creativity Fit into a Productivist Industrial Model of Knowledge Production?" Ghassib's article focuses on the transformation of science from pre-modern times to the present. Ghassib (2010) notes that, unlike in an earlier era when the economy depended on static…

  11. Empirical Testing of a Theoretical Extension of the Technology Acceptance Model: An Exploratory Study of Educational Wikis

    Science.gov (United States)

    Liu, Xun

    2010-01-01

    This study extended the technology acceptance model and empirically tested the new model with wikis, a new type of educational technology. Based on social cognitive theory and the theory of planned behavior, three new variables, wiki self-efficacy, online posting anxiety, and perceived behavioral control, were added to the original technology…

  12. Learning with Interactive Whiteboards: Determining the Factors on Promoting Interactive Whiteboards to Students by Technology Acceptance Model

    Science.gov (United States)

    Kilic, Eylem; Güler, Çetin; Çelik, H. Eray; Tatli, Cemal

    2015-01-01

    Purpose: The purpose of this study is to investigate the factors which might affect the intention to use interactive whiteboards (IWBs) by university students, using Technology Acceptance Model by the structural equation modeling approach. The following hypothesis guided the current study: H1. There is a positive relationship between IWB…

  13. Supersymmetric Fits after the Higgs Discovery and Implications for Model Building

    CERN Document Server

    Ellis, John

    2014-01-01

    The data from the first run of the LHC at 7 and 8 TeV, together with the information provided by other experiments such as precision electroweak measurements, flavour measurements, the cosmological density of cold dark matter and the direct search for the scattering of dark matter particles in the LUX experiment, provide important constraints on supersymmetric models. Important information is provided by the ATLAS and CMS measurements of the mass of the Higgs boson, as well as the negative results of searches at the LHC for events with missing transverse energy accompanied by jets, and the LHCb and CMS measurements off BR($B_s \\to \\mu^+ \\mu^-$). Results are presented from frequentist analyses of the parameter spaces of the CMSSM and NUHM1. The global $\\chi^2$ functions for the supersymmetric models vary slowly over most of the parameter spaces allowed by the Higgs mass and the missing transverse energy search, with best-fit values that are comparable to the $\\chi^2$ for the Standard Model. The $95\\%$ CL lower...

  14. Non-linear least squares curve fitting of a simple theoretical model to radioimmunoassay dose-response data using a mini-computer

    International Nuclear Information System (INIS)

    Wilkins, T.A.; Chadney, D.C.; Bryant, J.; Palmstroem, S.H.; Winder, R.L.

    1977-01-01

    Using the simple univalent antigen univalent-antibody equilibrium model the dose-response curve of a radioimmunoassay (RIA) may be expressed as a function of Y, X and the four physical parameters of the idealised system. A compact but powerful mini-computer program has been written in BASIC for rapid iterative non-linear least squares curve fitting and dose interpolation with this function. In its simplest form the program can be operated in an 8K byte mini-computer. The program has been extensively tested with data from 10 different assay systems (RIA and CPBA) for measurement of drugs and hormones ranging in molecular size from thyroxine to insulin. For each assay system the results have been analysed in terms of (a) curve fitting biases and (b) direct comparison with manual fitting. In all cases the quality of fitting was remarkably good in spite of the fact that the chemistry of each system departed significantly from one or more of the assumptions implicit in the model used. A mathematical analysis of departures from the model's principal assumption has provided an explanation for this somewhat unexpected observation. The essential features of this analysis are presented in this paper together with the statistical analyses of the performance of the program. From these and the results obtained to date in the routine quality control of these 10 assays, it is concluded that the method of curve fitting and dose interpolation presented in this paper is likely to be of general applicability. (orig.) [de

  15. Fits combining hyperon semileptonic decays and magnetic moments and CVC

    International Nuclear Information System (INIS)

    Bohm, A.; Kielanowski, P.

    1982-10-01

    We have performed a test of CVC by determining the baryon charges and magnetic moments from the hyperon semileptonic data. Then CVC was applied in order to make a joint fit of all baryon semileptonic decay data and baryon magnetic moments for the spectrum generating group (SG) model as well as for the conventional (cabibbo and magnetic moments in nuclear magnetons) model. The SG model gives a very good fit with chi 2 /n/sub D/ = 25/20 approximately equals 21% C.L. whereas the conventional model gives a fit with chi 2 /n/sub D/ = 244/20

  16. Two Aspects of the Simplex Model: Goodness of Fit to Linear Growth Curve Structures and the Analysis of Mean Trends.

    Science.gov (United States)

    Mandys, Frantisek; Dolan, Conor V.; Molenaar, Peter C. M.

    1994-01-01

    Studied the conditions under which the quasi-Markov simplex model fits a linear growth curve covariance structure and determined when the model is rejected. Presents a quasi-Markov simplex model with structured means and gives an example. (SLD)

  17. The globalization of training in adolescent health and medicine: one size does not fit all.

    Science.gov (United States)

    Leslie, Karen

    2016-08-01

    Adolescent medicine across the globe is practiced within a variety of healthcare models, with the shared vision of the promotion of optimal health outcomes for adolescents. In the past decade, there has been a call for transformation in how health professionals are trained, with recommendations that there be adoption of a global outlook, a multiprofessional perspective and a systems approach that considers the connections between education and health systems. Many individuals and groups are now examining how best to accomplish this educational reform. There are tensions between the call for globally accepted standards of education models and practice (a one-size fits all approach) and the need to promote the ability for education practices to be interpreted and transformed to best suit local contexts. This paper discusses some of the key considerations for 'importing' training program models for adolescent health and medicine, including the importance of cultural alignment and the utilization of best evidence and practice in health professions education.

  18. Determining Mission Statement Effectiveness from a Fit Perspective

    Directory of Open Access Journals (Sweden)

    Toh Seong-Yuen

    2017-08-01

    Full Text Available The purpose of this paper is to study the relationship between the organization's mission statement and its outcomes from a fit perspective in the alignment of the organization's structural and cultural elements. Based on an extension of Campbell's (1991 mission model by combination of ideas from two schools of thought in mission statement studies (structural and cultural, the authors introduce the concept of “fit” to show how it contributes towards a new mission statement model. The results show that both alignments are important to create a fit situation in order to positively impact organization outcomes. Based on Cohen (1988, the detected effect size of .322 is considered large. The managerial implication is that there should be more focus on managing organisational alignment to support a fit situation as this is instrumental to mission statement effectiveness. The originality of this study stems from the idea that while past studies develop model based on ideas from within the confine of a particular school of thought, this study is one of the first to combine ideas from both the structural and cultural schools of thought by extending Campbell's (1991 mission model using the fit perspective.

  19. The fitting parameters extraction of conversion model of the low dose rate effect in bipolar devices

    International Nuclear Information System (INIS)

    Bakerenkov, Alexander

    2011-01-01

    The Enhanced Low Dose Rate Sensitivity (ELDRS) in bipolar devices consists of in base current degradation of NPN and PNP transistors increase as the dose rate is decreased. As a result of almost 20-year studying, the some physical models of effect are developed, being described in detail. Accelerated test methods, based on these models use in standards. The conversion model of the effect, that allows to describe the inverse S-shaped excess base current dependence versus dose rate, was proposed. This paper presents the problem of conversion model fitting parameters extraction.

  20. Quantifying and Reducing Curve-Fitting Uncertainty in Isc: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Campanelli, Mark; Duck, Benjamin; Emery, Keith

    2015-09-28

    Current-voltage (I-V) curve measurements of photovoltaic (PV) devices are used to determine performance parameters and to establish traceable calibration chains. Measurement standards specify localized curve fitting methods, e.g., straight-line interpolation/extrapolation of the I-V curve points near short-circuit current, Isc. By considering such fits as statistical linear regressions, uncertainties in the performance parameters are readily quantified. However, the legitimacy of such a computed uncertainty requires that the model be a valid (local) representation of the I-V curve and that the noise be sufficiently well characterized. Using more data points often has the advantage of lowering the uncertainty. However, more data points can make the uncertainty in the fit arbitrarily small, and this fit uncertainty misses the dominant residual uncertainty due to so-called model discrepancy. Using objective Bayesian linear regression for straight-line fits for Isc, we investigate an evidence-based method to automatically choose data windows of I-V points with reduced model discrepancy. We also investigate noise effects. Uncertainties, aligned with the Guide to the Expression of Uncertainty in Measurement (GUM), are quantified throughout.

  1. A Special Pre-Service-Inspection Using Radiographic Testing(RT) for Brazing Fitting used in Aircraft Hydraulic System

    International Nuclear Information System (INIS)

    Kim, Gyu Ho

    2010-01-01

    Brazing fitting which is one of the aircraft hydraulic power system components is widely used for saving weight and achieving higher reliability. Any inherent defects or damage of fitting can cause system failure and/or physical damage of human body due to highly pressurized fluid. Radiographic testing(RT) technique and additional micro-structure investigation on cut-away surfaces have been accomplished to find out some defect-like-inhomogeneity in the fittings. The radiography results showed that some defect-like-inhomogeneity existed inside body. Additional micro-structure investigation on cut-away surface reveals that the inhomogeneity is due to internal voids. In this study, it can be is said that RT technique can be a useful tool for field acceptance test of hydraulic brazing fitting in short time

  2. Theoretically unprejudiced fits to proton scattering

    International Nuclear Information System (INIS)

    Kobos, A.M.; Mackintosh, R.S.

    1979-01-01

    By using a spline interpolation method applied to all components of the proton optical potential we have fitted elastic scattering from 40 Ca and from 16 O at a range of energies. The potentials are highly oscillatory and we have shown that similar oscillations are found when the spline fitting procedure is applied to pseudo-data generated from potentials of known l-dependence. Moreover, we show how to find an l-independent potential equivalent to one that is l-dependent and we find that it is oscillatory and that various characteristic features of empirical spline fit potentials can be explained. Thus, by fitting the data with model indenpendt l-independent potentials we have found support for the contention that the nucleon optical potential should be viewed as being l-dependent. This work may be regarded as an example of the kind of physical information that can be gained by pursuing exact fits to proton elastic scattering data

  3. A comparison of approaches in fitting continuum SEDs

    International Nuclear Information System (INIS)

    Liu Yao; Wang Hong-Chi; Madlener David; Wolf Sebastian

    2013-01-01

    We present a detailed comparison of two approaches, the use of a pre-calculated database and simulated annealing (SA), for fitting the continuum spectral energy distribution (SED) of astrophysical objects whose appearance is dominated by surrounding dust. While pre-calculated databases are commonly used to model SED data, only a few studies to date employed SA due to its unclear accuracy and convergence time for this specific problem. From a methodological point of view, different approaches lead to different fitting quality, demand on computational resources and calculation time. We compare the fitting quality and computational costs of these two approaches for the task of SED fitting to provide a guide to the practitioner to find a compromise between desired accuracy and available resources. To reduce uncertainties inherent to real datasets, we introduce a reference model resembling a typical circumstellar system with 10 free parameters. We derive the SED of the reference model with our code MC3 D at 78 logarithmically distributed wavelengths in the range [0.3 μm, 1.3 mm] and use this setup to simulate SEDs for the database and SA. Our result directly demonstrates the applicability of SA in the field of SED modeling, since the algorithm regularly finds better solutions to the optimization problem than a pre-calculated database. As both methods have advantages and shortcomings, a hybrid approach is preferable. While the database provides an approximate fit and overall probability distributions for all parameters deduced using Bayesian analysis, SA can be used to improve upon the results returned by the model grid.

  4. Acceptance and barriers to access of occupational e-mental health: cross-sectional findings from a health-risk population of employees.

    Science.gov (United States)

    Hennemann, Severin; Witthöft, Michael; Bethge, Matthias; Spanier, Katja; Beutel, Manfred E; Zwerenz, Rüdiger

    2018-04-01

    Occupational e-mental-health (OEMH) may extend existing instruments for preservation or restoration of health and work ability. As a key precondition to efficient implementation, this study examined acceptance and person-centered barriers to potential uptake of OEMH for work-related distress in employees with an elevated risk of early retirement. Within the framework of the "Third German Sociomedical Panel of Employees", 1829 employees with prior sickness absence payments filled out a self-administered questionnaire. Participants had a mean age of 49.93 years (SD = 4.06). 6.2% indicated prior use of eHealth interventions. Potential predictors of acceptance of OEMH were examined based on the "Unified Theory of Acceptance and Use of Technology" (UTAUT) extended by work ability, mental health, eHealth literacy and demographic characteristics. 89.1% (n = 1579) showed low to moderate acceptance (M = 2.20, SD = 1.05, range 1-5). A path analysis revealed significant, positive direct effects of UTAUT predictors on acceptance (performance expectancy: 0.48, SE = 0.02, p acceptance. Model fit was good [χ 2 (7) = 12.91, p = 0.07, RMSEA = 0.02, CFI = 1.00, TLI = 0.99, SRMR = 0.01]. Attitudes towards OEMH are rather disadvantageous in the studied risk group. Implementation of OEMH, therefore, requires a-priori education including promotion of awareness, favorable attitudes regarding efficacy and usability in a collaborative approach.

  5. Understanding Retailers’ Acceptance of Virtual Stores

    Directory of Open Access Journals (Sweden)

    Irene Y.L. Chen

    2010-09-01

    Full Text Available The acceptance of e-commerce among consumers has stimulated the rise of virtual stores. Increasing traditional retailers or people who do not have sufficient capital for maintaining a brick-and-mortar store have considered using virtual stores to reach global market. In the e-commerce literature, there has been rich research evidence concerning consumers’ acceptance of virtual stores. However, rigorous academic research on retailers’ acceptance of virtual stores is relatively scarce today. This study draws upon the theory of planned behavior and information richness theory to propose an integrated theoretical model. A field survey is used to collect data from e-tailers. The data are analyzed to examine the six relationships posited in the research model. Findings of this study provide a further research avenue for e-commerce, and implications for those who are managing or considering using virtual stores.

  6. Fitness club

    CERN Multimedia

    Fitness club

    2011-01-01

    General fitness Classes Enrolments are open for general fitness classes at CERN taking place on Monday, Wednesday, and Friday lunchtimes in the Pump Hall (building 216). There are shower facilities for both men and women. It is possible to pay for 1, 2 or 3 classes per week for a minimum of 1 month and up to 6 months. Check out our rates and enrol at: http://cern.ch/club-fitness Hope to see you among us! CERN Fitness Club fitness.club@cern.ch  

  7. EVALUATION OF THE INTENTION OF USING PRODUCTS WITH INTERNET OF THINGS WITHIN THE CONTEXT OF TECHNOLOGY ACCEPTANCE MODEL

    OpenAIRE

    Pazvant, Ece; Faiz, Emel

    2018-01-01

    Purpose-  Developments in information technology anddigital arena have opened the way for many new applications that willfacilitate everyday life. It is important for producers to know the reasonsbehind acceptance, use and rejection of these new applications. The purpose ofthis study is to examine the basic factors behind the intention of usingproducts with internet of things technology that are new to our life within thetechnology acceptance model.   Methodology- TheMultiple Regression Analy...

  8. Acceptance sampling using judgmental and randomly selected samples

    Energy Technology Data Exchange (ETDEWEB)

    Sego, Landon H.; Shulman, Stanley A.; Anderson, Kevin K.; Wilson, John E.; Pulsipher, Brent A.; Sieber, W. Karl

    2010-09-01

    We present a Bayesian model for acceptance sampling where the population consists of two groups, each with different levels of risk of containing unacceptable items. Expert opinion, or judgment, may be required to distinguish between the high and low-risk groups. Hence, high-risk items are likely to be identifed (and sampled) using expert judgment, while the remaining low-risk items are sampled randomly. We focus on the situation where all observed samples must be acceptable. Consequently, the objective of the statistical inference is to quantify the probability that a large percentage of the unsampled items in the population are also acceptable. We demonstrate that traditional (frequentist) acceptance sampling and simpler Bayesian formulations of the problem are essentially special cases of the proposed model. We explore the properties of the model in detail, and discuss the conditions necessary to ensure that required samples sizes are non-decreasing function of the population size. The method is applicable to a variety of acceptance sampling problems, and, in particular, to environmental sampling where the objective is to demonstrate the safety of reoccupying a remediated facility that has been contaminated with a lethal agent.

  9. Examining the Antecedents of ICT Adoption in Education Using an Extended Technology Acceptance Model (TAM)

    Science.gov (United States)

    Teeroovengadum, Viraiyan; Heeraman, Nabeel; Jugurnath, Bhavish

    2017-01-01

    This study assesses the determinants of ICT adoption by educators in the teaching and learning process in the context of a developing country, Mauritius. A hierarchical regression analysis is used, to firstly determine the incremental effects of factors from the technology acceptance model (TAM) while controlling for demographic variables such as…

  10. Understanding Student Teachers' Behavioural Intention to Use Technology: Technology Acceptance Model (TAM) Validation and Testing

    Science.gov (United States)

    Wong, Kung-Teck; Osman, Rosma bt; Goh, Pauline Swee Choo; Rahmat, Mohd Khairezan

    2013-01-01

    This study sets out to validate and test the Technology Acceptance Model (TAM) in the context of Malaysian student teachers' integration of their technology in teaching and learning. To establish factorial validity, data collected from 302 respondents were tested against the TAM using confirmatory factor analysis (CFA), and structural equation…

  11. LOCO with Constraints and Improved Fitting Technique

    International Nuclear Information System (INIS)

    Not Available

    2007-01-01

    LOCO has been a powerful beam-based diagnostics and optics control method for storage rings and synchrotrons worldwide ever since it was established at NSLS by J. Safranek. This method measures the orbit response matrix and optionally the dispersion function of the machine. The data are then fitted to a lattice model by adjusting parameters such as quadrupole and skew quadrupole strengths in the model, BPM gains and rolls, corrector gains and rolls of the measurement system. Any abnormality of the machine that affects the machine optics can then be identified. The resulting lattice model is equivalent to the real machine lattice as seen by the BPMs. Since there are usually two or more BPMs per betatron period in modern circular accelerators, the model is often a very accurate representation of the real machine. According to the fitting result, one can correct the machine lattice to the design lattice by changing the quadrupole and skew quadrupole strengths. LOCO is so important that it is routinely performed at many electron storage rings to guarantee machine performance, especially after the Matlab-based LOCO code became available. However, for some machines, LOCO is not easy to carry out. In some cases, LOCO fitting converges to an unrealistic solution with large changes to the quadrupole strengths ΔK. The quadrupole gradient changes can be so large that the resulting lattice model fails to find a closed orbit and subsequent iterations become impossible. In cases when LOCO converges, the solution can have ΔK that is larger than realistic and often along with a spurious zigzag pattern between adjacent quadrupoles. This degeneracy behavior of LOCO is due to the correlation between the fitting parameters - usually between neighboring quadrupoles. The fitting scheme is therefore less restrictive over certain patterns of changes to these quadrupoles with which the correlated quadrupoles fight each other and the net effect is very inefficient χ 2 reduction, i

  12. Cross-Validation of a Glucose-Insulin-Glucagon Pharmacodynamics Model for Simulation using Data from Patients with Type 1 Diabetes

    DEFF Research Database (Denmark)

    Wendt, Sabrina Lyngbye; Ranjan, Ajenthen; Møller, Jan Kloppenborg

    2017-01-01

    three PD model test fits in each of the seven subjects. Thus, we successfully validated the PD model by leave-one-out cross-validation in seven out of eight T1D patients. Conclusions: The PD model accurately simulates glucose excursions based on plasma insulin and glucagon concentrations. The reported...... for concentrations of glucagon, insulin, and glucose. We fitted pharmacokinetic (PK) models to insulin and glucagon data using maximum likelihood and maximum a posteriori estimation methods. Similarly, we fitted a pharmacodynamic (PD) model to glucose data. The PD model included multiplicative effects of insulin...... and glucagon on EGP. Bias and precision of PD model test fits were assessed by mean predictive error (MPE) and mean absolute predictive error (MAPE). Results: Assuming constant variables in a subject across nonoutlier visits and using thresholds of ±15% MPE and 20% MAPE, we accepted at least one and at most...

  13. The acceptance and use of a virtual learning environment in China

    NARCIS (Netherlands)

    Raaij, van E.M.; Schepers, J.J.L.

    2008-01-01

    The success of a virtual learning environment (VLE) depends to a considerable extent on student acceptance and use of such an e-learning system. After critically assessing models of technology adoption, including the Technology Acceptance Model (TAM), TAM2, and the Unified Theory of Acceptance and

  14. Grammaticality, Acceptability, and Probability: A Probabilistic View of Linguistic Knowledge.

    Science.gov (United States)

    Lau, Jey Han; Clark, Alexander; Lappin, Shalom

    2017-07-01

    The question of whether humans represent grammatical knowledge as a binary condition on membership in a set of well-formed sentences, or as a probabilistic property has been the subject of debate among linguists, psychologists, and cognitive scientists for many decades. Acceptability judgments present a serious problem for both classical binary and probabilistic theories of grammaticality. These judgements are gradient in nature, and so cannot be directly accommodated in a binary formal grammar. However, it is also not possible to simply reduce acceptability to probability. The acceptability of a sentence is not the same as the likelihood of its occurrence, which is, in part, determined by factors like sentence length and lexical frequency. In this paper, we present the results of a set of large-scale experiments using crowd-sourced acceptability judgments that demonstrate gradience to be a pervasive feature in acceptability judgments. We then show how one can predict acceptability judgments on the basis of probability by augmenting probabilistic language models with an acceptability measure. This is a function that normalizes probability values to eliminate the confounding factors of length and lexical frequency. We describe a sequence of modeling experiments with unsupervised language models drawn from state-of-the-art machine learning methods in natural language processing. Several of these models achieve very encouraging levels of accuracy in the acceptability prediction task, as measured by the correlation between the acceptability measure scores and mean human acceptability values. We consider the relevance of these results to the debate on the nature of grammatical competence, and we argue that they support the view that linguistic knowledge can be intrinsically probabilistic. Copyright © 2016 Cognitive Science Society, Inc.

  15. Engaging Overweight Adolescents in a Health and Fitness Program Using Wearable Activity Trackers.

    Science.gov (United States)

    Wilson, Marian; Ramsay, Samantha; Young, Kimberly J

    Our objectives were to (a) examine feasibility and receptivity of overweight adolescents joining a community-based group fitness program and (b) test preliminary efficacy of a 12-week pilot intervention designed to promote health, fitness, and self-efficacy for the identified teens. The 12-week fitness program for overweight adolescents was developed and included planned physical activities, nutrition classes, and goal-setting sessions. A one-group pre-/posttest study design evaluated 20 participants from grades 10 through 12 who enrolled in the program pilot study. Participants were given a wearable activity tracker that captured data using an Internet-based platform. Outcome measures included body mass index, screen time, fitness, and cardiovascular measures. A community fitness program for overweight adolescents was successfully implemented. High school students were receptive to the intervention and reported high program satisfaction. Positive effects included measurements of strength, systolic blood pressure, weight, and screen time behaviors. This study provides evidence to support the feasibility, acceptance, and preliminary effects of the pilot program with overweight adolescents. Copyright © 2017 National Association of Pediatric Nurse Practitioners. Published by Elsevier Inc. All rights reserved.

  16. Fitness voter model: Damped oscillations and anomalous consensus.

    Science.gov (United States)

    Woolcock, Anthony; Connaughton, Colm; Merali, Yasmin; Vazquez, Federico

    2017-09-01

    We study the dynamics of opinion formation in a heterogeneous voter model on a complete graph, in which each agent is endowed with an integer fitness parameter k≥0, in addition to its + or - opinion state. The evolution of the distribution of k-values and the opinion dynamics are coupled together, so as to allow the system to dynamically develop heterogeneity and memory in a simple way. When two agents with different opinions interact, their k-values are compared, and with probability p the agent with the lower value adopts the opinion of the one with the higher value, while with probability 1-p the opposite happens. The agent that keeps its opinion (winning agent) increments its k-value by one. We study the dynamics of the system in the entire 0≤p≤1 range and compare with the case p=1/2, in which opinions are decoupled from the k-values and the dynamics is equivalent to that of the standard voter model. When 0≤psystem approaches exponentially fast to the consensus state of the initial majority opinion. The mean consensus time τ appears to grow logarithmically with the number of agents N, and it is greatly decreased relative to the linear behavior τ∼N found in the standard voter model. When 1/2system initially relaxes to a state with an even coexistence of opinions, but eventually reaches consensus by finite-size fluctuations. The approach to the coexistence state is monotonic for 1/2oscillations around the coexistence value. The final approach to coexistence is approximately a power law t^{-b(p)} in both regimes, where the exponent b increases with p. Also, τ increases respect to the standard voter model, although it still scales linearly with N. The p=1 case is special, with a relaxation to coexistence that scales as t^{-2.73} and a consensus time that scales as τ∼N^{β}, with β≃1.45.

  17. Influence Processes for Information Technology Acceptance

    DEFF Research Database (Denmark)

    Bhattacherjee, Anol; Sanford, Clive Carlton

    2006-01-01

    This study examines how processes of external influence shape information technology acceptance among potential users, how such influence effects vary across a user population, and whether these effects are persistent over time. Drawing on the elaboration-likelihood model (ELM), we compared two...... alternative influence processes, the central and peripheral routes, in motivating IT acceptance. These processes were respectively operationalized using the argument quality and source credibility constructs, and linked to perceived usefulness and attitude, the core perceptual drivers of IT acceptance. We...... further examined how these influence processes were moderated by users' IT expertise and perceived job relevance and the temporal stability of such influence effects. Nine hypotheses thus developed were empirically validated using a field survey of document management system acceptance at an eastern...

  18. Fast Acceptance by Common Experience

    Directory of Open Access Journals (Sweden)

    Nathan Berg

    2010-08-01

    Full Text Available Schelling (1969, 1971a,b, 1978 observed that macro-level patterns do not necessarily reflect micro-level intentions, desires or goals. In his classic model on neighborhood segregation which initiated a large and influential literature, individuals with no desire to be segregated from those who belong to other social groups nevertheless wind up clustering with their own type. Most extensions of Schelling's model have replicated this result. There is an important mismatch, however, between theory and observation, which has received relatively little attention. Whereas Schelling-inspired models typically predict large degrees of segregation starting from virtually any initial condition, the empirical literature documents considerable heterogeneity in measured levels of segregation. This paper introduces a mechanism that can produce significantly higher levels of integration and, therefore, brings predicted distributions of segregation more in line with real-world observation. As in the classic Schelling model, agents in a simulated world want to stay or move to a new location depending on the proportion of neighbors they judge to be acceptable. In contrast to the classic model, agents' classifications of their neighbors as acceptable or not depend lexicographically on recognition first and group type (e.g., ethnic stereotyping second. The FACE-recognition model nests classic Schelling: When agents have no recognition memory, judgments about the acceptability of a prospective neighbor rely solely on his or her group type (as in the Schelling model. A very small amount of recognition memory, however, eventually leads to different classifications that, in turn, produce dramatic macro-level effects resulting in significantly higher levels of integration. A novel implication of the FACE-recognition model concerns the large potential impact of policy interventions that generate modest numbers of face-to-face encounters with members of other social groups.

  19. 40 CFR 600.007-80 - Vehicle acceptability.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Vehicle acceptability. 600.007-80... FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations for 1977 and Later Model Year Automobiles-General Provisions § 600.007-80 Vehicle acceptability. (a) All...

  20. 40 CFR 600.007-08 - Vehicle acceptability.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Vehicle acceptability. 600.007-08... FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations for 1977 and Later Model Year Automobiles-General Provisions § 600.007-08 Vehicle acceptability. (a) All...