Energy Technology Data Exchange (ETDEWEB)
Suarez Alcantara, Karina; Rodriguez Castellanos, Andres; Soloza Feria, Omar [Centro de Investigacion y de Estudios Avanzados del IPN, Mexico D.F. (Mexico)]. E-mail: k.suarez.alcantara@gmail.com
2008-11-15
An hybrid Polymer Electrolyte Membrane Fuel Cell, PEMFC-Rechargeable Battery Go-kart has been designed and manufactured using AutoCAD software for the design and a CNC mechanical machine for the manufacture of components of the fuel cell. The membrane-electrode assemblies, MEAs, were integrated with a Gore-Select membrane and carbon cloth with Pt (20 wt % /C) 0.5 mg/cm{sup 2} anode and cathode electrode catalysts loading. High density graphite collector plates with 5mm thickness were used as collector plates. The estimated weigh of the go-kart with a driver is about 120 kg. The demand of the motor of the go-kart is 20 V and 5 A (100W), supplied by an hybrid system integrated by three 30Watts PEMFC. The commercially available Pb/acid rechargeable battery supplies energy for peripheral equipment. [Spanish] En este trabajo se presenta el diseno y la construccion de un go-kart hibrido pila de combustible con membrana de conduccion protonica tipo PEM (Proton Exchange Membrane, por sus siglas en ingles) y pila recargable. El diseno de los colectores de corriente de la pila se realizo utilizando el programa AutoCAD y la construccion mediante una fresadora con control numerico, CNC. Los ensambles membrana-electrocatalizador de la pila estan formados por membranas Gore-Select y por electrodos de Pt soportado en tela de carbon al 20 %peso/C con carga de 0.5 mg /cm{sup 2}, en anodo y catodo. Los platos colectores de corriente fueron manufacturados en grafito de alta densidad con espesor de 5 mm. La caracterizacion de la pila de combustible se realizo mediante ensayos de polarizacion potenciostatica. El peso total del go-kart y una persona a bordo es de 120 kg. La potencia del go-kart es generada por un motor de corriente directa de 20 V y 5 A (100 Watts). Para tal efecto, se construyeron tres pilas de combustible de 30 W cada una, con un respaldo de baterias recargables comerciales de Pb/acido para energizar equipos perifericos.
Energy Technology Data Exchange (ETDEWEB)
Nunez Nunez, Jorge; Suarez Pacheco, Jose; Novelo Navarrete, Jose H; Soto Apolinar, Efrain [Universidad de Quintana Roo, Chetumal, Quintana Roo (Mexico)
2000-07-01
In this text it's resumed the methodology that was carried out to make an atmospheric burner of biogas, as the criteria that were taken in account in order to determine the main parameters of it. It introduces a synthesis of the stages of design and manufacture of the device. The utility of this type of burner increase the efficiency of the oxidation of the biogas compared with the use of conventional burners that aren't designed for this purpose. [Spanish] En este trabajo se resume la metodologia que se llevo a cabo para la construccion de un quemador de biogas tipo atmosferico, asi como los criterios que se tomaron para la determinacion de los parametros principales del mismo. Se presenta una sintesis de las etapas de diseno y manufactura del dispositivo. El uso de este tipo de quemadores aumenta la eficiencia de la oxidacion del biogas en comparacion con el uso de quemadores convencionales que no estan disenados para quemar biogas.
Building solar dryer of tropical woods; Construccion de un secador solar de maderas tropicales
Energy Technology Data Exchange (ETDEWEB)
Hernandez R, J; Flores M, F. E; Cuevas D, O [Universidad de Quintana Roo, Chetumal, Quintana Roo (Mexico); Tolentino E, G [LABINTHAP-SEPI-ESIME-IPN, Mexico, D.F. (Mexico)
2000-07-01
In Quintana Roo, Mexico, several species of wood are used for handicrafts. The most commonly method used in the communities nearby Chetumal is natural drying, with the disadvantage of low quality in their products because the moisture contains in the wood. In this project studied the design of solar dryer for tropical woods in Quintana Roo. [Spanish] En este trabajo, se parte del analisis de las condiciones climatologicas existentes en el estado de Quintana Roo, Mexico, asi como de las necesidades de madera seca de una comunidad, como parametros basicos para el diseno y construccion de un secador solar de maderas tropicales.
Energy Technology Data Exchange (ETDEWEB)
Lopez P, J. Manuel A. [Doble dos soluciones de Negocios (Mexico); Morillon G, David; Rdriguez V, Luis [Universidad Autonoma de Mexico (Mexico)
2001-06-01
Tools and criteria for Cost-Benefit Analysis (ACB) of energy saving in bioclimatic designs (DB) are presented, for which a reference project is established. Based on the traditional design of air conditioning of a building and with the support of this one, the estimation of costs and benefits of the same building is made; but with passive systems. The tools used consider related resources such as time and money. Criteria are used such as: Present value (VP), Equivalent Annual Cost (EAC) and the Cost of the conserved Energy (CEC). The costs related to the construction, maintenance and operation of the design are taken into consideration. The differences between the design of reference and the Bioclimatic Design, established from the application of these criteria, allow evaluating the economic margin as far as operation and maintenance. Finally, the cost of the conserved energy of the bioclimatic measures is evaluated as an initiative for energy saving and calculates the present value from them in all of the period of useful life of the bioclimatic design. [Spanish] Se presentan herramientas y criterios para el analisis Costo-Beneficio (ACB) del ahorro de energia en los disenos bioclimaticos (DB), para lo cual se establece un proyecto de referencia. Basado en el diseno tradicional de la climatizacion de un edificio y con apoyo en este, se realiza la estimacion de costos y beneficios del mismo edificio; pero con sistema pasivos. Las herramientas usadas consideran recursos relacionados como son tiempo y dinero. Se usan criterios tales como: Valor Presente (VP), Costo Anual Equivalente (CAE) y el Costo de la Energia conservada (CEC). Se toman en consideracion los costos relacionados con la construccion, mantenimiento y operacion del diseno. Las diferencias entre el diseno de referencia y el Diseno Bioclimatico, establecidas a partir de la aplicacion de estos criterios, permiten evaluar el margen economico en cuanto a la operacion y el mantenimiento. Finalmente, se
Energy Technology Data Exchange (ETDEWEB)
Tardan Waltz, Jenny [Asociacion de Empresas para el Ahorro de la Energia en la Edificacion, A.C. (Mexico)
2007-10-15
In Mexico, the culture of energy saving began more than one decade ago, but the benefits are not yet concrete. The Mexican society, requires new designs of dwellings adapted to its needs and in addition modifies the present systems of construction that do not include criteria of design for the thermal comfort, the energy saving and the sustainability. It is urgent to reconsider the urbanism of the cities, as well as the promotion of the concept of sustainable development in all the branches of human activity. The design of dwellings must significantly integrate the energy and environmental components to reduce to the power consumption and the CO{sub 2} emissions. [Spanish] En Mexico, la cultura de ahorro de energia se inicio hace mas de una decada, pero los beneficios aun no son palpables. La sociedad mexicana, requiere de nuevos disenos de viviendas que se adapten a sus necesidades y que ademas modifiquen los sistemas de construccion actuales que no incluyen criterios de diseno para el confort termico, el ahorro de energia y la sustentabilidad. Es urgente reconsiderar el urbanismo de las ciudades, asi como la promocion del concepto de desarrollo sustentable en todas las ramas de la actividad humana. El diseno de la vivienda debe integrar los componentes energeticos y medioambientales, para reducir significativamente el consumo de energia y las emisiones de CO{sub 2}.
Energy Technology Data Exchange (ETDEWEB)
Cubillas Talamante, Lorena Gpe [Facultad de Arquitectura, Universidad Autonoma de Baja California, Mexicali, Baja California (Mexico)
2005-07-01
The bioclimatic design profits of the natural resources for the improvement of the construction quality as well as the user's life. The combination of these two concepts within the architectonic design generates an interesting duality to consider within the understanding of the user's physical and psychological environment and the obtaining of a correlation of reality and dreams. Environmental psychology is focused on the researching of the psychological effects of the architectonic environment on the human experience and behavior. Human behavior works under parameters established during its development. Through the habits and styles of life practiced in childhood those parameters establish themselves to later on obtain satisfiers in the search of the life quality of human beings. [Spanish] El diseno bioclimatico aprovecha los recursos naturales para el mejoramiento de la calidad de la construccion y vida del usuario. La combinacion de estos dos conceptos dentro del diseno arquitectonico, genera dualidad interesante de entender el medio ambiente fisico y psicologico de los usuarios y obtener una identificacion entre la realidad y los suenos. La psicologia ambiental se ha enfocado a investigar sobre la relacion de los efectos psicologicos del ambiente construido o arquitectonico sobre la conducta y la experiencia humana. La conducta humana trabaja bajo parametros establecidos durante el desarrollo del mismo, a traves de los habitos y estilos de vida desde su infancia van marcando esos parametros que despues sirven para lograr satisfactores en la busqueda de la calidad de vida de los seres humanos.
Energy Technology Data Exchange (ETDEWEB)
Hernandez Luna, Gabriela
2001-06-15
centigrade, followed of the condition using 6 liters of oil, in which a maximum temperature of 115 centigrade was obtained and in the tests with 6 liters of water as load a maximum temperature of 95 centigrade was registered. In these tests the temperature of the oil surpasses 60 centigrade during an approximate period of 7 hours and is higher than 80 centigrade by a lapse of 5 hours. The water temperature is higher than 60 centigrade for a period of more than 5 hours and during 3 hours is higher than 80 centigrade. These results are satisfactory, because they assure the accomplishment of the process of baking inside the furnace. A calculation program was elaborated to implement the theoretical model of the concentration. This program reads the data of radiation intensity in the horizontal plane supplied by the weather station of the CIE and determines the incident radiation in the furnace collector. The theoretical model of the thermal behavior was implemented in another computer program; this program reads the data of the incident radiation in the collector of the furnace and the data of room temperature and calculates the temperature of the furnace as a time function. The model overestimates the temperature reached in the furnace, nevertheless reproduces qualitatively the thermal behavior of the same. In spite of the limitations of the theoretical model, this can be of utility in achieving the reproduction of the temperature of the load experimentally registered, through an effective coefficient of heat losses and an effective coefficient of heat capacity, characteristic of each one of the conditions of the test. [Spanish] Esta tesis presenta el diseno, construccion y caracterizacion de un horno solar tipo caja para su uso en comunidades rurales en la zona intertropical. El trabajo presentado en esta tesis parte del diseno opto-geometrico de un horno solar tipo caja propuesto por un entusiasta grupo de jovenes estudiantes (Acosta et al., 1996, Vazquez et al., 1998
Energy Technology Data Exchange (ETDEWEB)
Gonzalez-Huerta, R. G.; Santillan-Aragon, G. [Instituto Politecnico Nacional, Mexico, D.F. (Mexico)]. E-mail: rosgonzalez_h@yahoo.com.mx; Solorza-Feria, O. [CINVESTAV-IPN, Mexico D.F. (Mexico)
2009-09-15
llevar a cabo estos estudios se requiere contar con el equipo necesario para realizar los estudios electroquimicos y determinar la estabilidad y desempeno de distintos electrocatalizadores. En este trabajo se presenta el diseno y construccion de un electrolizador de prueba tipo PEM para determinar el desempeno de distintos electrocatalizadores anodicos. Su area activa es de 4 cm{sup 2}, su estructura es de grafito y las mallas distribuidoras de corriente son de acero inoxidable. Se determino su desempeno utilizando como electrocatalizadores anodicos Pt/C E-Tek al 10% y una mezcla 50%-50%, 25%-75% y 75%-25% de RuO{sub 2}-IrO{sub 2}. Los autores agradecen el apoyo financiero otorgado por el ICYTDF (PICS08-37), al IPN (SIP-20090433) y al Arq. Nestor Romero por el maquinado del electrolizador.
Energy Technology Data Exchange (ETDEWEB)
Martinez Flores, Marco Antonio; Tamayo Flores, G. A. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: mamf@iie.org.mx; gatamayo@iie.org.mx
2010-11-15
To expand the scope of studies and technological developments in the Laboratory of Combustion of the Thermal Process Management a new experimental furnace with a capacity of 1.5 MWt was designed and built. Spray design studies with real operational evaluation (comparison of emission of Combustion products and thermal behavior) as well as information on the behavior of the NO{sub x} emissions will be produced. An automatic control system using a water cooling jacket provides the cooling of the furnace. The furnace design is modular, consisting of six sections. Currently three trials to its maximum load of operation have been performed. The results show that the global energy balance of the furnace matches the design. The flue gas residence time and temperature also match those at the exit of steam generators of big capacity. [Spanish] Para ampliar las posibilidades de estudios y desarrollos tecnologicos del laboratorio de combustion de la Gerencia de Procesos Termicos, se diseno y construyo un nuevo horno experimental con capacidad maxima de 1.5 MegaWatts termicos (MWt). Este horno permitira realizar estudios de diseno de atomizadores con evaluacion de operacion real (comparacion de emision de productos de combustion y comportamiento termico), asi como ampliar la informacion que se tiene en el comportamiento de la emision de los oxidos de nitrogeno (NO{sub x}) que se producen en el horno. El diseno del horno es modular, compuesto por seis secciones, las cuales se enfrian de forma independiente a traves de un sistema de control automatico, empleando una chaqueta de enfriamiento por la cual circula agua. Actualmente se han realizado tres encendidos hasta alcanzar su carga maxima de operacion, los resultados obtenidos muestran que el balance de energia global del horno experimental es practicamente el de diseno y cumple con las caracteristicas de tiempo de residencia y temperatura de gases a la salida del horno de Generadores de Vapor de gran capacidad.
Energy Technology Data Exchange (ETDEWEB)
Cubillas Talamante, Lorena Gpe [Facultad de Arquitectura, Universidad Autonoma de Baja California, Mexicali, Baja California (Mexico)
2005-07-01
The bioclimatic design profits of the natural resources for the improvement of the construction quality as well as the user's life. The combination of these two concepts within the architectonic design generates an interesting duality to consider within the understanding of the user's physical and psychological environment and the obtaining of a correlation of reality and dreams. Environmental psychology is focused on the researching of the psychological effects of the architectonic environment on the human experience and behavior. Human behavior works under parameters established during its development. Through the habits and styles of life practiced in childhood those parameters establish themselves to later on obtain satisfiers in the search of the life quality of human beings. [Spanish] El diseno bioclimatico aprovecha los recursos naturales para el mejoramiento de la calidad de la construccion y vida del usuario. La combinacion de estos dos conceptos dentro del diseno arquitectonico, genera dualidad interesante de entender el medio ambiente fisico y psicologico de los usuarios y obtener una identificacion entre la realidad y los suenos. La psicologia ambiental se ha enfocado a investigar sobre la relacion de los efectos psicologicos del ambiente construido o arquitectonico sobre la conducta y la experiencia humana. La conducta humana trabaja bajo parametros establecidos durante el desarrollo del mismo, a traves de los habitos y estilos de vida desde su infancia van marcando esos parametros que despues sirven para lograr satisfactores en la busqueda de la calidad de vida de los seres humanos.
Energy Technology Data Exchange (ETDEWEB)
Raull-Martin, J. [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)
2000-09-01
The purpose of this paper is to present a summarized version of the different types of construction of grounding systems, as web as their materials and formulas, which are necessary and useful for the design and building of a grounding network for medium to high voltage facilities. A description is also made of how to determine the electrical resistivity of subsoil layers with different physical characteristics. Several illustrative examples are also solved in the paper. [Spanish] El proposito de este articulo es presentar de manera resumida los diferentes tipos de construccion de los sistemas de tierra, asi como sus materiales y formulas, los cuales son necesarios y utiles para el diseno y edificacion de una red de tierra para instalaciones de mediana y alta tension. Se describe tambien la obtencion de las diferentes resistividades que presentan los terrenos con diversas caracteristicas fisicas. Asi mismo, se solucionan ejercicios ilustrativos a lo largo del articulo.
Energy Technology Data Exchange (ETDEWEB)
Raull Martin, J. [Facultad de Ingenieria, UNAM, Mexico, D.F. (Mexico)
2000-09-01
The purpose of this paper is to present a summarized version of the different types of construction of grounding systems, as well as their materials and formulas, which are necessary and useful for the design and building of a grounding network for medium to high voltage facilities. A description is also made of how to determine the electrical resistivity of subsoil layers with different physical characteristics. Several illustrative examples are also solved in the paper. [Spanish] El proposito de este articulo es presentar de manera resumida los diferentes tipos de construccion de los sistemas de tierra, asi como sus materiales y formulas, los cuales son necesarios y utiles para el diseno y edificacion de una red de tierra para instalaciones de mediana y alta tension. Se describe tambien la obtencion de las diferentes resistividades que presenta los terrenos con diversas caracteristicas fisicas. Asimismo, se solucionan ejercicios ilustrativos a lo largo del articulo.
Industrial stacks design; Diseno de chimeneas industriales
Energy Technology Data Exchange (ETDEWEB)
Cacheux, Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1987-12-31
The Instituto de Investigaciones Electricas (IIE) though its Civil Works Department, develops, under contract with CFE`s Gerencia de Proyectos Termoelectricos (Management of Fossil Power Plant Projects), a series of methods for the design of stacks, which pretends to solve the a present day problem: the stack design of the fossil power plants that will go into operation during the next coming years in the country. [Espanol] El Instituto de Investigaciones Electricas (IIE), a traves del Departamento de Ingenieria Civil, desarrolla, bajo contrato con la Gerencia de Proyectos Termoelectricos, de la Comision Federal de Electricidad (CFE), un conjunto de metodos para el diseno de chimeneas, con el que se pretende resolver un problema inmediato: el diseno de las chimeneas de las centrales termoelectricas que entraran en operacion durante los proximos anos, en el pais.
Industrial stacks design; Diseno de chimeneas industriales
Energy Technology Data Exchange (ETDEWEB)
Cacheux, Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1986-12-31
The Instituto de Investigaciones Electricas (IIE) though its Civil Works Department, develops, under contract with CFE`s Gerencia de Proyectos Termoelectricos (Management of Fossil Power Plant Projects), a series of methods for the design of stacks, which pretends to solve the a present day problem: the stack design of the fossil power plants that will go into operation during the next coming years in the country. [Espanol] El Instituto de Investigaciones Electricas (IIE), a traves del Departamento de Ingenieria Civil, desarrolla, bajo contrato con la Gerencia de Proyectos Termoelectricos, de la Comision Federal de Electricidad (CFE), un conjunto de metodos para el diseno de chimeneas, con el que se pretende resolver un problema inmediato: el diseno de las chimeneas de las centrales termoelectricas que entraran en operacion durante los proximos anos, en el pais.
Energy Technology Data Exchange (ETDEWEB)
Lopez P, J. Manuel A. [Doble Dos Soluciones de Negocios, S.A. de C.V., Mexico, D.F. (Mexico); Morillon G, David; Rodriguez V, Luis [Instituto de Ingenieria de la UNAM, Mexico, D.F. (Mexico)
1999-07-01
con la construccion, mantenimiento y operacion del diseno. Las diferencias entre el diseno de referencia y el DB, establecidas a partir de la aplicacion de estos criterios, permiten evaluar el margen economico del DB en cuanto a la operacion y el mantenimiento. Finalmente se evalua el CEC de las medidas bioclimaticas como una iniciativa de ahorro de energia y se calcula el valor presente de los ahorros de energia en todo el periodo de vida util de un DB.
La ocurrencia del artículo definido en construcciones partitivas
Directory of Open Access Journals (Sweden)
María Mare
2014-11-01
Full Text Available Una de las propiedades que presentan las construcciones partitivas es la denominada Condición de Anti-unicidad (ver Jackendoff 1977, Kayne 1994, Barker 1998, i.e., se trata de estructuras indefinidas. Sin embargo, hay una serie de datos que parecen poner en cuestión la condición mencionada: (1 las construcciones partitivas en las variedades antiguas de las lenguas romances, que presentan la secuencia determinante definido + numeral (Esp.Ant. los dos de los soldados y (2 en español actual, aparece el determinante definido cuando el cuantificador es más o menos (los más de los estudiantes. En este trabajo nos proponemos demostrar que ninguna de estas construcciones viola la Condición de Anti-unicidad y que la presencia del determinante es el resultado de que el movimiento del cuantificador a la posición de Especificador del SD no tuvo lugar.
Las construcciones con esqueleto en madera
Directory of Open Access Journals (Sweden)
Heinz Leser S.
1984-06-01
Estos sistemas se emplean preferentemente en viviendas prefabricadas y edificios de pequeña envergadura. Finalmente, consideramos las construcciones con "esqueleto en madera", cuyo campo de aplicación principal está en las edificaciones de mediana extensión: escuelas, centros comunitarios, pequeñas industrias o bloques habitacionales.
Energy Technology Data Exchange (ETDEWEB)
Patlan Frausto, Jose O; Acosta Aradillas, Juan [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1987-12-31
In this article are presented, in a conceptual manner the main elements that participate in the electric design of synchronous generators. Also, other options are presented for computers utilization as a design support. Afterwards, a computer program developed by the Instituto de Investigaciones Electricas (IIE) for the electric design of projecting poles generators is presented, oriented towards obtaining their electro-magnetic dimensioning. Finally, with the purpose of validating this program, the results obtained in a specific case, are presented. [Espanol] En este articulo se presentan, de manera conceptual, los principales elementos que participan en el proceso de diseno electrico de generadores sincronos. Tambien se plantean otras opciones para utilizar las computadoras como apoyo de diseno. Posteriormente, se describe un programa de computo desarrollado en el Instituto de Investigaciones Electricas (IIE) para el diseno electrico de generadores de polos salientes, orientado a obtener su dimensionamiento electromagnetico. Por ultimo, con el proposito de validar este programa, se presentan los resultados obtenidos en un caso particular.
Energy Technology Data Exchange (ETDEWEB)
Patlan Frausto, Jose O.; Acosta Aradillas, Juan [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1986-12-31
In this article are presented, in a conceptual manner the main elements that participate in the electric design of synchronous generators. Also, other options are presented for computers utilization as a design support. Afterwards, a computer program developed by the Instituto de Investigaciones Electricas (IIE) for the electric design of projecting poles generators is presented, oriented towards obtaining their electro-magnetic dimensioning. Finally, with the purpose of validating this program, the results obtained in a specific case, are presented. [Espanol] En este articulo se presentan, de manera conceptual, los principales elementos que participan en el proceso de diseno electrico de generadores sincronos. Tambien se plantean otras opciones para utilizar las computadoras como apoyo de diseno. Posteriormente, se describe un programa de computo desarrollado en el Instituto de Investigaciones Electricas (IIE) para el diseno electrico de generadores de polos salientes, orientado a obtener su dimensionamiento electromagnetico. Por ultimo, con el proposito de validar este programa, se presentan los resultados obtenidos en un caso particular.
Energy Technology Data Exchange (ETDEWEB)
Martinez Alonso, Ruben
2003-10-15
This research work presents the design and construction of a single-phase microcontroller-based digital electric energy meter. The digital instrument displays the energy demand (kw-h) based on up-to-date tariff provided by the Mexican national utility Comision Federal de Electricidad (CFE). The meter digitally processes voltage and current line waveform samples taken at its input, displaying, in real time, the number of electrical parameters calculated. For a better instrument performance a PIC16F874 microcontroller from microchip has been used as computational core. The parameters of interest are visualized in a liquid crystal display of 2 X 16 characters. The user interface includes a menu where some of the parameters can be selected by the operator. In the event of an electric power supply disruption the meter keeps to the energy consumption in memory. The voltage and current measured levels ranges from 1 to 255 Vrms and 0.1 to 25.5 Arms, respectively. The power is displayed in 5 digits ranging from 0 to 6502.5 watts and the energy is displayed with 5 whole digits and 5 decimals ranging, from 0 kWh up to 99999.99999 kWh. These values are refreshed every one second together with the actual electrical consumption cost which ranges from 0 up to 9999.9 pesos. The digital measuring instrument has been built based on four main inter-connected modules named, data acquisition; signal conditioning; signal processing; and display. A set of efficient assembly code routines has been developed in order to calculate the number of electrical parameter previously described. After a debugging process, the optimised code has been assembled for the PIC16F874. [Spanish] El trabajo presenta el diseno y construccion de un medidor digital de energia electrica basado en un microcontrolador, el cual visualiza la demanda por el consumo de kWh, basandose en una tarifa escalonada de tipo domestico de CFE. Tambien el aparato visualiza voltaje, corriente, potencia y el tiempo de medicion
Energy Technology Data Exchange (ETDEWEB)
Bansal, N.K.; Bhandari, M.S.; Kummar, P.S. [Centro para el Estudio de Energia, Instituto Hindu de Tecnologia, Hauz Khas, Nueva Delhi (Indonesia)
2005-01-15
An energy efficiency analysis to a set of buildings was made in India to quantify the effects of the individual design concepts with respect to the energy system in general. The saving potential of energy of different concepts as well as the orientation, windows, air cavities, insulation, etc. was quantified for the different climatic conditions that prevail in most of the Central India regions. It is demonstrated that the specific requirement of heat energy can be reduced to 300 kWh/m{sup 2} a (U{sub edifice} = 2.13 W/m{sup 2} K) for a building of normal construction up to 143 kWh/m{sup 2} a (U{sub edifice} = 0.95 W/m{sup 2} K) when using ceiling insulation and walls and by means of the use of double glass windows. [Spanish] Se realizo el analisis de eficiencia de energia a un conjunto de edificios en la India, para cuantificar los efectos de los conceptos individuales de diseno respecto al sistema de energia en general. El potencial de ahorro de energia de distintos conceptos, como la orientacion, ventanas, cavidades de aire, aislamiento, etc. fue cuantificado para las distintas condiciones climaticas que prevalecen en la mayoria de las regiones de India central. Se demuestra que el requerimiento especifico de energia calorifica puede ser reducida de 300 kWh/m{sup 2} a (U{sub edificio} = 2.13 W/m{sup 2} K) para un edificio de construccion normal hasta 143 kWh/m{sup 2} a (U{sub edificio} = 0.95 W/m{sup 2} K) al usar un aislante en el techo, paredes y mediante el empleo de ventanas de doble vidrio.
Energy Technology Data Exchange (ETDEWEB)
Morillon Galvez, David [Programa Universitario de Energia, Universidad Nacional Autonoma de Mexico, Mexico D.F. (Mexico)
2005-07-01
uso de los materiales de construccion. El cambio consiste, en brindar herramientas para que el disenador y constructor, considere la interaccion del ambiente del lugar con la construccion, a fin de que sea esta misma la que regule los intercambios de calor con el ambiente y propicie las condiciones de comodidad o confort del ser humano. Con base en el estudio del bioclima, que se presentara, de las diversas zonas climaticas de la Republica, mediante el cual se emiten recomendaciones para el diseno arquitectonico y urbano. Ademas de analizar y discutir sobre la herramienta que representa el diseno bioclimatico para la construccion de edificios, considerando que aproximadamente el 66 % del pais presenta condiciones de clima calido. Las recomendaciones consistiran en definir la orientacion favorable de las fachadas al clima del lugar, caracteristicas termicas, espesores y acabados de los materiales de construccion, soleamiento en ventanas, forma del edificio, entre otros, permitira lograr un edificio disenado para las condiciones de confort y ahorrador de energia, acorde con las normas oficiales para el diseno termico de la envolvente del edificio que, en este ano sera obligatoria para el caso de los edificios no residenciales y permite adelantarse a la de edificios residenciales. Ello puede ser sin costo extra para el constructor, y si con beneficios para el usuario, como son el ahorro de energia electrica, disminucion de la facturacion, condiciones de comodidad termica, asi como ambientales, entre otros. Todo ello se presentara en este documento, ademas de presentar proyectos construidos y ejemplos de modificacion de los actuales disenos de viviendas en el pais.
Methodology for bioclimatic design; Metodologia para el diseno bioclimatico
Energy Technology Data Exchange (ETDEWEB)
Morillon Galvez, David [Instituto de Ingenieria de la UNAM, Mexico, D.F. (Mexico)
2000-07-01
A methodology for natural air conditioning of buildings is presented; bioclimatic architecture, in order to contribute to the suitable use of components of the building (walls, ceilings, floors, orientations, etc.) that when interacting with the environment takes advantage of it, without deterioration of the same, obtaining energy efficient designs. As well as an analysis of the elements and factors that the architecture must have to be sustainable; an adequate design to the environment, saving and efficient use of energy, the use of alternating energies by means of ecotechnologies and the self-sufficiency. [Spanish] Se presenta una metodologia para la climatizacion natural de edificios; arquitectura bioclimatica, con el objetivo de aportar al uso adecuado de componentes del edificio (muros, techos, pisos, orientaciones, etc.) que al interactuar con el ambiente tome ventaja de el, sin deterioro del mismo, logrando disenos energeticamente eficientes. Asi como un analisis de los elementos y factores que debe tener la arquitectura para ser sustentable; un diseno adecuado al ambiente, ahorro y uso eficiente de la energia, el uso de energias alternas mediante ecotecnologias y la autosuficiencia.
Arquitectos cántabros y construcciones escolares
Directory of Open Access Journals (Sweden)
Victoria Cabieces Ibarrondo
2010-12-01
Full Text Available (ES Dentro del patrimonio escolar de Cantabria hemos de resaltar un importante legado de edificios de excelente factura, al que sin duda han contribuido con su buen hacer profesional un destacado número de arquitectos, tanto locales como foráneos. Las líneas que a continuación se redactan quieren recoger esa valiosa aportación, aunque algunas escuelas actualmente hayan desaparecido o cambiado su función. En esta ocasión nos ceñiremos a los arquitectos nacidos en la región y que realizaron construcciones escolares de finales del XIX hasta la primera mitad del XX. Nos ocuparemos en otra oportunidad de las construcciones de los últimos cincuenta años. No pretendemos exponer sus biografías, que en muchos casos han sido estudiadas en sendas monografías, sino constatar la autoría del rico patrimonio escolar que proyectaron. Señalaremos algunos arquitectos y sus obras escolares, que nos permitirán conocer la evolución de las tipologías y la adaptación a las novedades más sobresalientes en el panorama artístico del momento.
Energy Technology Data Exchange (ETDEWEB)
Nagore, Gabriel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1987-12-31
The profitable use of the advantages offered by the computer aided design, through the integral system for the structural design of power transmission towers (SIDETT) will contribute to facilitate and improve the design of the structures that link the electric power generation centers with the consumers. [Espanol] El aprovechamiento de las ventajas que ofrece el diseno asistido por computadora, a traves del sistema integral para el diseno estructural de torres de transmision (SIDETT), contribuira a agilizar y mejorar el diseno de las estructuras que enlazan los centros de generacion de energia electrica con los consumidores.
Energy Technology Data Exchange (ETDEWEB)
Nagore, Gabriel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1986-12-31
The profitable use of the advantages offered by the computer aided design, through the integral system for the structural design of power transmission towers (SIDETT) will contribute to facilitate and improve the design of the structures that link the electric power generation centers with the consumers. [Espanol] El aprovechamiento de las ventajas que ofrece el diseno asistido por computadora, a traves del sistema integral para el diseno estructural de torres de transmision (SIDETT), contribuira a agilizar y mejorar el diseno de las estructuras que enlazan los centros de generacion de energia electrica con los consumidores.
Energy Technology Data Exchange (ETDEWEB)
Lopez C, Raymundo; Morales G, Juan R.; Diaz C, Alen; Lizardi R, Arturo [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D. F. (Mexico); Vaca M, Mabel [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)
2001-04-01
An equipment meant to obtain the thermal conductivity coefficient was designed, constructed and evaluated. Convection losses in the experimental device were reduced by means of a vacuum chamber that wraps it. Conduction losses were minimized with the proper insulation. The tested materials are the most frequently used in the construction of buildings in Mexico, such as concrete, burnt brick, adobe and gypsum. Results observed are comparable to those reported in the literature. The essays done using the vacuum chamber produced values of thermal conductivity coefficient 3% lower than those obtained without using it. [Spanish] Se diseno, construyo y evaluo un equipo, con el cual se obtiene el coeficiente de conductividad termica en diversos materiales. En este se reducen las perdidas por conveccion, colocando una camara de vacio alrededor del conjunto de prueba. Las perdidas por conduccion se minimizan con un aislamiento adecuado. Los materiales evaluados son los que mas se utilizan en la construccion en Mexico, a saber, el concreto, el ladrillo cocido, el adobe y el yeso. Los valores obtenidos, sin considerar las perdidas por conveccion, se comparan con los de la literatura. Los ensayos utilizando la camara de vacio proporcionan valores del coeficiente de conductividad termica menores en 3% a los obtenidos sin dicha camara.
Tipología de Replicaciones para la Síntesis de Experimentos en Ingeniería del Software
Gómez Gómez, Omar Salvador
2012-01-01
La Ingenieria del Software Experimental (ISE) traslada a la Ingenieria del Software (IS) el paradigma experimental que se ha aplicado con exito en diversas disciplinas cientificas. El objetivo de la ISE es hacer de la construccion del software una actividad predecible gracias al conocimiento de las relaciones entre los procesos de produccion del software y los productos que se obtienen. Para avanzar en el paradigma experimental en IS no es suficiente aplicar las tecnicas de diseno experimenta...
Energy Technology Data Exchange (ETDEWEB)
Ponce Velez, Marco A; Lopez Velazquez, Juan Jose [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Lopez Tagle, Alfredo; Aragon Garcia, Hector [Comision Federal de Electricidad (Mexico)
1999-07-01
The use of fixed capacitors banks in distribution and transmission systems is a useful tool to compensate the demand of reactive power and the drop of voltage of the power lines. Nevertheless, unforeseen happenings can be originated that could cause decompensation in the system reliability. Due to the previous fact, the Transmission and Transformation Coordinator (CTT) of the Comision Federal de Electricidad (CFE) asked for the design and the construction of a movable bank of capacitors for an emergent compensation of reactive power. In this article it is presented the most relevant of the design, the construction and the operation of the movable bank of capacitors developed in the Instituto de Investigaciones Electricas (IIE). [Spanish] El empleo de bancos capacitadores fijos en los sistemas de distribucion y transmision es una herramienta util para compensar la demanda de reactivos y la caida de tension de las lineas. Sin embargo, se pueden originar imprevistos que descompensan la confiabilidad del sistema. Debido a lo anterior, la Coordinadora de Transmision y Transformacion (CTT) de la Comision Federal de Electricidad (CFE) solicito el diseno y la construccion de un banco movil de capacitores para una compensacion emergente de potencia reactiva. En este articulo se presenta lo mas relevante del diseno, la construccion y la operacion del banco movil de capacitores desarrollado en el Instituto de Investigaciones Electricas (IIE).
Energy Technology Data Exchange (ETDEWEB)
Custodio Garcia, E; Cordova Gomez, Jose F; Irineo Mijangos, Jose A; Montiel Reyes, W; Gutierrez Leon, Gustavo M [Universidad Tecnologica de Tabasco, Tecnologia Ambiental (Mexico)
2010-07-01
encuentren en el mercado por su especializacion. En este trabajo los autores su experiencia en el diseno y construccion de la primera planta piloto para produccion de biodiesel en el estado de Tabasco, asi como en el uso del biocombustible en los autobuses y plantas de emergencia donde se ha probado el biodiesel. La planta piloto para biodiesel esta disenada para producir 400 litros por hora, cada Bach, tiene una capacidad de almacenamiento de 2400 litros y cuenta con un sistema de filtros y tanque de lavado con agua para eliminar agua y materias solidas que esten contaminando el proceso. Para la produccion del biodiesel se utiliza metoxido, que es una mezcla de hidroxido de sodio y alcohol metanol para que reaccione con el aceite y se forme el biodiesel. La planta se encuentra trabajando con aceite vegetal usado como materia prima, mismo que se recolecta de los hoteles y restaurantes de la zona. Las criticas han servido para ir mejorando el proceso, pues en ocasiones no todo se ha escrito sobre el biodiesel. Este trabajo es el producto conjunto entre la union de la iniciativa privada (Grupo DG) y la Universidad Tecnologica de Tabasco.
Energy Technology Data Exchange (ETDEWEB)
Hanessian D, Ana V.; Gordon, Manuel [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D.F. (Mexico)
2009-07-01
In the Mexico's National Energy Balance of 2008, it is considered that of the total of the electrical power consumption in our country, 18% is dedicated to lighting. Conscious of the necessity of saving energy in public lighting in this article is presented the design, construction and analysis of the power consumption of a public light fed with electricity of photovoltaic cells and the control of intensity on the light in inverse way of the natural light. A lamp constructed based in light emitting diodes (LEDs) is used. This has the quality of consuming very little energy that could be provided by the sun and be stored to use it at night. With this system, proven at scale, energy savings are obtained superior to 50% of the conventional one and, in relation to the commercial photovoltaic (FV) luminaries up to 30%. [Spanish] Del Balance Nacional de Energia, de Mexico, de 2008, se considera que del total del consumo de energia electrica en nuestro pais, el 18% esta dedicado a la iluminacion. Conscientes de la necesidad de ahorrar energia en alumbrado publico, en este articulo se presenta el diseno de construccion y analisis del consumo energetico de una luminaria publica alimentada con electricidad de celdas fotovoltaicas y el control de intensidad de la luz de manera inversa a la luz natural. Se utiliza un foco construido a base a los diodos emisores de luz (LEDs, por sus siglas en ingles). Estos tienen la cualidad de consumir muy poca energia que podra ser suministrada por el sol y almacenada para utilizarla en la noche. Con este sistema, probado a escala, se logran ahorros de energia superiores al 50% del convencional y, en relacion a las luminarias fotovoltaicas (FV) comerciales, hasa el 30%.
Energy Technology Data Exchange (ETDEWEB)
Zayas Perez, Benjamin Eddie; Islas Perez, Eduardo; Bahena Rada, Jessica Liliana; Romero Lima, Jesus [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Sierra Rodriguez, Benjamin; Moreno Diaz, Humberto [Comision Federal de Electricidad (Mexico)
2011-07-01
The physical design of electric substations involves a variety of activities, such as developing, reviewing and performing modifications to different design proposals, estimating costs and producing documents to be integrated into an executive project. These activities are usually conducted at the Distribution Divisions of the Federal Electric Commission (CFE) through two separate processes: the development of engineering plans with computer-aided design software (CAD) and volumetric calculations for the initial budget using conventional spreadsheets. The documents are manually developed on an individual basis, without the existence of any functions to allow for automatically updating the design modifications of any of the plans. The corresponding initial budget becomes a lengthy and laborious process with the likelihood of inconsistencies among the documents. In order to optimize the design process for the public and electromechanical works of electric substations (ES) in a three-dimensional (3D) graphic environment, the IIE's Management of Process Supervision, in coordination with the CFE Distribution Subdivision, developed the System for the Design of Electric Substation Distribution (SDESD). This system makes use of the advantages of CAD3D technology to develop detail engineering, cost engineering to calculate initial budgets and virtual reality for three-dimensional interactive navigation. It is worth mentioning that this system is currently in the implementation phase at the CFE Distribution Subdivision. This article briefly describes the main stages in the development of the project, as well as the functioning and principal components of the system. [Spanish] El diseno fisico de subestaciones electricas implica una variedad de actividades, tales como elaborar, revisar y efectuar modificaciones de diferentes propuestas de diseno, estimar costos y producir documentos, para integrarlos como parte de un proyecto ejecutivo. Estas actividades usualmente se
2013-12-16
... Airworthiness Directives; EADS CASA (Type Certificate Previously Held by Construcciones Aeron[aacute]uticas, S.A... rule. SUMMARY: We are adopting a new airworthiness directive (AD) for certain EADS CASA (Type...., Washington, DC. For EADS-CASA service information identified in this AD, contact EADS-CASA, Military...
2012-02-07
... Airworthiness Directives; EADS CASA (Type Certificate Previously Held by Construcciones Aeronauticas, S.A... proposed to correct an unsafe condition for the specified products. The MCAI states: EADS-CASA received... address this condition, EADS-CASA has developed an engine condition control cable P/N 35-56382-0005 with...
Energy Technology Data Exchange (ETDEWEB)
Pimentel, Raul [Polioles S. A. de C. V., Mexico, D. F. (Mexico)
1993-12-31
In the past last years, the building industry has been faced with requirements in the rational energy use and environmental preservation. The polystyrene foam is a material that for more than forty years has demonstrated its attributes all over the world in its application in the construction industry as well as in the packing and crating industries, becoming a synonym of economic construction in regard to energy saving and a synonym also of a rational and safe packing. In this paper a short description is made of the manufacturing process of the expandable polystyrene foam, its properties and applications in the construction industry. [Espanol] En los ultimos anos, la industria de la construccion se ha enfrentado a exigencias en el uso racional de la energia y en la preservacion del medio ambiente. La espuma de poliestireno expansible es un material que por mas de cuarenta anos, ha demostrado sus cualidades a nivel mundial en su aplicacion tanto en la industria de la construccion como en la del empaque y embalaje, llegando a convertirse en sinonimo de una construccion economica en cuanto a ahorro de energia y sinonimo tambien de un embalaje racional y seguro. En este trabajo se hace una breve descripcion del proceso de fabricacion de la espuma de poliestireno expandible, sus propiedades y aplicaciones dentro de la industria de la construccion.
Energy Technology Data Exchange (ETDEWEB)
Pimentel, Raul [Polioles S. A. de C. V., Mexico, D. F. (Mexico)
1992-12-31
In the past last years, the building industry has been faced with requirements in the rational energy use and environmental preservation. The polystyrene foam is a material that for more than forty years has demonstrated its attributes all over the world in its application in the construction industry as well as in the packing and crating industries, becoming a synonym of economic construction in regard to energy saving and a synonym also of a rational and safe packing. In this paper a short description is made of the manufacturing process of the expandable polystyrene foam, its properties and applications in the construction industry. [Espanol] En los ultimos anos, la industria de la construccion se ha enfrentado a exigencias en el uso racional de la energia y en la preservacion del medio ambiente. La espuma de poliestireno expansible es un material que por mas de cuarenta anos, ha demostrado sus cualidades a nivel mundial en su aplicacion tanto en la industria de la construccion como en la del empaque y embalaje, llegando a convertirse en sinonimo de una construccion economica en cuanto a ahorro de energia y sinonimo tambien de un embalaje racional y seguro. En este trabajo se hace una breve descripcion del proceso de fabricacion de la espuma de poliestireno expandible, sus propiedades y aplicaciones dentro de la industria de la construccion.
Energy Technology Data Exchange (ETDEWEB)
Fuentes Fleixanet, Victor A; Rodriguez Viqueira Manuel [Universidad Autonoma Metropolitana Azcapotzalco, Mexico, D.F(Mexico)
2000-07-01
This paper is a proposal for the systematization of the process of bioclimatic design, particularly in its analytical stage. It is based on the proposals of the classic researchers such as: Olgyay, Givoni and Szokolay, but also in new contributions like those of Yeang. Nevertheless, it is about a methodology adapted to the specific requirements of teaching and research that are carried out in the Bioclimatic Design Laboratory of the Universidad Autonoma Metropolitana, Azcapotzalco Unit. What is presented here is a part of a very ample research project that intends to develop or to structure a design methodology that incorporates the environmental variables related to man and architecture: of course, with the objective of facilitating the designer work so that the final architectonic product has a more harmonic response to the environment, offers conditions of integral well- being to its occupants and be is efficient in the handling of the resources. It also looks for the definition of the necessary analysis, design and evaluation tools, necessary in order that the application of the methodology is clear, simple and can be carried out by any designer, even if he does not have a wide knowledge of bioclimatic design. [Spanish] Este trabajo es una propuesta para la sistematizacion del proceso de diseno bioclimatico, particularmente en su etapa analitica. Se basa en las propuestas de los investigadores clasicos como: Olgyay, Givoni y Szokolay, pero tambien en nuevas aportaciones como las de Yeang. Sin embargo se trata de una metodologia adaptada a los requerimientos especificos de docencia e investigacion que se llevan a cabo en el Laboratorio de Diseno Bioclimatico de la Universidad Autonoma Metropolitana Unidad Azcapotzalco. Lo que aqui se presenta forma parte de un proyecto de investigacion muy amplio que pretende, desarrollar o estructurar una metodologia de diseno que incorpore las variables ambientales relacionadas con el hombre y la arquitectura: desde luego, con
Puesta en valor de algunas construcciones del ing. Salamone
Traversa, Luis P.; Di Maio, Ángel A; Longoni, René
2003-01-01
En Enero del año 2002, la Legislatura bonaerense sancionó la ley n° 12.854, que declaró Patrimonio provincial a la obra pública municipal del ingeniero Francisco Salamone (1898-1959), construída durante el Gobierno de Manuel Fresco (1936-1940). De casi un centenar de construcciones y proyectos realizados dentro de lo que se denominó Plan de Obras Públicas Municipales, en más de 20 localidades pertenecientes a 16 Partidos del interior bonaerense, al menos, una treintena de ellas son signifi...
2010-11-05
... Airworthiness Directives; EADS CASA (Type Certificate Previously Held by Construcciones Aeronauticas, S.A...) that were, at that moment, defined in issue C of EADS-CASA document DT-0-C00-05001. That document has... implementation of the revised Fuel Airworthiness Limitations contained in issue D of EADS- CASA document DT-0-C00...
Energy Technology Data Exchange (ETDEWEB)
Bojorquez, Gonzalo; Gallegos, Ricardo; Luna, Anibal [Universidad Autonoma de Baja Callifornia, Mexicali, Baja California (Mexico)
2000-07-01
se diseno sobre la base del clima y con estrategias de adecuacion ambiental. Se simulo el comportamiento termico de cada caso, y se determino el maximo requerimiento de climatizacion artificial por volumen de construccion. En un futuro, el uso de los simuladores termicos para la evaluacion de disenos arquitectonicos y edificios construidos debera considerarse como una herramienta basica en Mexico, no solo para especialistas en el area de evaluacion termica, sino para todos aquellos implicados en la arquitectura y construccion.
Energy Technology Data Exchange (ETDEWEB)
Casaravilla, G.; Chaer, R. [Instituto de Ingenieria Electrica, Facultad de Ingenieria, Universidad de la Republica, Montevideo (Uruguay)
1997-12-31
This paper describes the software Hybrid 95 and how it is used for the design of hybrid systems. As an application example some of the design stages are looked over (determination of the wind resource, simulations for sizing generation/storage and topology) of the Potrerillo installation. Taking into account the site clear ecological connotations, during the design consideration is made of the visual impact that represents the possible wind-generator, therefore several locations and wind-generator heights are studied, even arriving to the wind-generation elimination. [Espanol] Este trabajo describe el software Hybrid 95 y como se utiliza a los efectos del diseno de sistemas hibridos. Como ejemplo de aplicacion se recorren algunas de las etapas del diseno (determinacion del recurso eolico, simulaciones para el dimensionado de generacion/acumulacion y topologia) de la instalacion de Potrerillo. Teniendo en cuenta las claras connotaciones ecologistas del lugar, durante el diseno se tiene presente el impacto visual que representa el eventual aerogenerador por lo que se estudian diversas ubicaciones y alturas de aerogenerador, llegandose incluso a estudiar la eliminacion de la generacion eolica.
Energy Technology Data Exchange (ETDEWEB)
Casaravilla, G; Chaer, R [Instituto de Ingenieria Electrica, Facultad de Ingenieria, Universidad de la Republica, Montevideo (Uruguay)
1998-12-31
This paper describes the software Hybrid 95 and how it is used for the design of hybrid systems. As an application example some of the design stages are looked over (determination of the wind resource, simulations for sizing generation/storage and topology) of the Potrerillo installation. Taking into account the site clear ecological connotations, during the design consideration is made of the visual impact that represents the possible wind-generator, therefore several locations and wind-generator heights are studied, even arriving to the wind-generation elimination. [Espanol] Este trabajo describe el software Hybrid 95 y como se utiliza a los efectos del diseno de sistemas hibridos. Como ejemplo de aplicacion se recorren algunas de las etapas del diseno (determinacion del recurso eolico, simulaciones para el dimensionado de generacion/acumulacion y topologia) de la instalacion de Potrerillo. Teniendo en cuenta las claras connotaciones ecologistas del lugar, durante el diseno se tiene presente el impacto visual que representa el eventual aerogenerador por lo que se estudian diversas ubicaciones y alturas de aerogenerador, llegandose incluso a estudiar la eliminacion de la generacion eolica.
Sustainable housing for developing countries: A case study in Mexico
Energy Technology Data Exchange (ETDEWEB)
Dominguez, Sandra L [Arizona (United States)
2000-07-01
This paper presents the project of a home designed for a middle class Mexican family. The project emphasizes the use of low energy building design to reduce the impact of new construction upon the environment, natural resources, and the building occupants. [Spanish] Este articulo presenta el proyecto arquitectonico de una casa habitacional disenado para una familia de clase media en Mexico. El proyecto intenta promover el diseno de edificios de bajo consumo energetico, con objeto de reducir el impacto de la construccion sobre el medio ambiente, los recursos naturales y los ocupantes del espacio en cuestion.
Energy Technology Data Exchange (ETDEWEB)
Torres Toledano, Gerardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1988-12-31
A procedure is presented for the alternative design comparison of feed water heaters, based in the failure records of damaged tubes during operation. The procedure is used for cases in which non-continuous or random inspections are made to the feed-water heaters. [Espanol] Se presenta un procedimiento para comparar disenos alternativos de calentadores, basandose en los registros de fallas de los tubos rotos acumuladas durante su operacion. El procedimiento se emplea para casos en los que se realizan inspecciones a los calentadores no continuas, ya sea periodicas o al azar.
Energy Technology Data Exchange (ETDEWEB)
Labollita, Santiago [Universidad Nacional de Cuyo, Instituto Balseiro, Centro Atomico Bariloche (Argentina)
2008-07-01
This work approaches the design process of an electric generator suitable for running efficiently at high speed, driven by a turbo shaft.The axial flux concept was used.For the mechanical design of the prototype, cooling capacity and mounting method were considered, looking for simplicity of the parts evolved. Neodymium-iron-boron permanent magnets were used as magnetic source.For the electrical design, a calculation tool was developed in order to predict the prototype electrical parameters and optimize its geometry.The goal was to obtain 1 kW of electric power at a speed of 100,000 rpm.The efficiency and electrical behaviour of the prototype were characterized at speeds between 2,000 rpm and 30,000 rpm and then the behaviour at the design condition was predicted by obtaining an equivalent electric circuit.The estimated load voltage was 237 V as well as an electrical efficiency of 95%.Eddy current effects were not recognized. Increase of the internal resistance and decree of inductance were observed while raising the electric frequency.Finally, an electronic system was developed in order to use the prototype as a c.c. motor. Global performance was measured according to different supply characteristic. An optimum supply voltage was found.A maximum efficiency of 63% was reached.;El presente trabajo aborda el proceso de diseno de un generador electrico apto para funcionar eficientemente a alta velocidad, impulsado por un turboeje portatil. Se utilizo el concepto de flujo axial.En el diseno mecanico del prototipo se considero la capacidad de refrigeracion y la forma de montaje particular del conjunto, buscando la simplicidad de sus partes.Se utilizaron imanes permanentes de Neodimio-Hierro-Boro como fuente magnetica. Para el diseno electrico se genero una herramienta de calculo que permitio estimar los parametros electricos del prototipo y optimizar su geometria. Se busco obtener 1kW de potencia electrica a una velocidad de 100.000rpm.Se caracterizo el rendimiento y el
System programs design of motors; Sistema de programas de diseno de motores
Energy Technology Data Exchange (ETDEWEB)
Diaz Gonzalez Palomas, Oscar; Ciprian Avila, Fernando [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1988-12-31
This paper describes the objective of creating the program system for induction motors design SIPRODIMO, its scope, its general characteristics, its structure and the results obtained with its application, as well as the service capacity developed by the Motors Area of the Instituto de Investigaciones Elctricas. [Espanol] En este articulo se describe el objetivo de crear el sistema de programas de diseno de motores de induccion, Siprodimo, su alcance, sus caracteristicas generales, su estructura y los resultados obtenidos con su aplicacion, asi como la capacidad de servicio desarrollada por el area de motores, del Instituto de Investigaciones Electricas.
Energy Technology Data Exchange (ETDEWEB)
Aguilar J, R.A.; Valdovinos A, M.; Lopez V, H. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)
1985-01-15
For the operation of the Pelletron electron accelerator is required to have control of the filament current. For it was designed, built and installed an electromechanical system located in the Acceleration Unit inside the Accelerator tank and operated from the Control console. All the components located inside the tank operated under the following conditions: Pressure: until 7.03 Kg/cm{sup 2}; High voltage: 10{sup 6} V (only the insulating arrow); Atmosphere: mixture of N{sub 2} and CO{sub 2} or SF{sub 6}. (Author)
"Variación sintáctica en las construcciones pasivas: las preposiciones introductoras del agente"
Nieuwenhuijsen, Dorien
2015-01-01
El presente trabajo constituye un estudio diacrónico acerca de la pérdida de la preposición de como introductora del complemento agente y la subsiguiente propagación de la preposición por en construcciones pasivas perifrásticas con ser. Además de presentar datos cuantitativos acerca de la
Knud Peter Harboe. Construcciones estrictas
Directory of Open Access Journals (Sweden)
Jaime José Ferrer Forés
2017-11-01
Full Text Available Se analiza la trayectoria del arquitecto danés Knud Peter Harboe (1925 - 2002 caracterizada por la fidelidad tanto a los elementos constructivos tradicionales como a los planteamientos modernos, y se examinan las timber frame houses más destacadas de la década de los sesenta, entre las que figura la casa del arquitecto en Ordrup (1958, y la posterior transposición a las estructuras porticadas de hormigón armado que desarrollará en la escala de los edificios públicos de la década de los setenta en la sede para N Foss Electric en Hillerød (1961 o el edificio de Pharmacia en Hillerød (1971, que le permitirán introducirse en la expresión formal del hormigón armado. La tectonicidad de su obra evoca la estructura anónima del entramado de las construcciones tradicionales y la noción de una arquitectura como ensamblaje de componentes, mediante la articulación de los postes de madera o la lógica de los elementos prefabricados que establecen el orden del espacio y la expresión del entramado estructural como sistema ordenador.
Directory of Open Access Journals (Sweden)
Paola Vanesa Demarchi
2015-08-01
Full Text Available Este artículo trata acerca del carácter “natural” y evidente que adquieren en las sociedades modernas las construcciones discursivas sobre lo esperable y deseable para la ciudad y sobre aquellos aspectos considerados problemáticos para las normas de urbanidad convenidas. Me interesa identificar y analizar las concepciones sobre el orden urbano y las emergencias sociales que se manifiestan a lo largo del siglo XX en los tratamientos informativos de la prensa riocuartense, y cómo el clima de la época se presenta en las construcciones mediáticas y a la forma en que la práctica periodística se articula con otras prácticas que dirigen su mirada a la ciudad.
Energy Technology Data Exchange (ETDEWEB)
Garcia Chavez, Jose Roberto [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D. F. (Mexico)
1994-12-31
The design and construction of current buildings has been characterized, most of all, in the last 30 years, for the lack of consideration in the design process of aspects that nowadays represent a fundamental importance. These aspects are related to energy conservation and environmental protection, with man as the main center of attention for the optimum satisfaction of its physiological as well as psychological needs. In this paper are presented the causes for the lack of consideration of the mentioned aspects and guidelines to follow are set forth for their integration in the design process. Also the architecture potential with a bioclimatic approach is analyzed, for energy saving in buildings. [Espanol] El diseno y construccion de edificios contemporaneos se ha caracterizado, sobre todo en los ultimos treinta anos, por la falta de consideracion en el proceso de diseno, de aspectos que hoy en dia revisten una importancia primordial. Estos aspectos se relacionan con la preservacion de la energia y del medio ambiente, teniendo al hombre como principal centro de atencion, para la satisfaccion optima de sus necesidades, tanto fisiologicas como psicologicas. En este trabajo, se presentan las causas de la falta de consideracion de los aspectos antes citados y se plantean las pautas a seguir para su integracion en el proceso de diseno. Asi mismo, se analiza el potencial de la arquitectura con un enfoque bioclimatico, para ahorro de energia en los edificios.
Energy Technology Data Exchange (ETDEWEB)
Torres Reyes, Ernestina; Navarrete Gonzalez, Jose L; Ibarra Salazar, Beatriz A; Picon Nunez, Martin [Instituto de Investigaciones Cientificas, Universidad de Guanajuato, Guanjuato, Guanajuato (Mexico)
2000-07-01
In this paper a thermal performance analysis of solar drying process at operating varying conditions is presented. It is described semi-empirical models to thermal characterization of an experimental device. A simulator of thermal performance for operating varying conditions was developed as a part of the procedure of thermal design of solar dryers. On the other hand, it is described a simplified method to design solar collectors based on the determination of minimum entropy generation during the thermal conversion of the solar device by using the thermal analysis procedure established and the method derived of the second law of the Thermodynamics are finally presented. [Spanish] En este trabajo se presenta el analisis termico del comportamiento del sistema -colector solar camara de secado-. Se describen los modelos semi-empiricos con los que se caracterizo termicamente un secador solar experimental del tipo indirecto. Se presenta tambien un procedimiento de diseno de equipo de secado que toma en cuenta las condiciones variables de operacion que presentan los dispositivos solares. Por otro lado se describe un procedimiento simplificado de diseno, basado en un analisis derivado de la segunda ley de la Termodinamica. Esta metodologia se fundamenta en la minima generacion de entropia durante la conversion termica de la energia solar, utilizando colectores solares planos. Finalmente se presentan los resultados del diseno preliminar de equipo de secado utilizando los dos procedimientos mencionados.
Energy Technology Data Exchange (ETDEWEB)
Vega Ortiz, Miguel; Gutierrez Arriola, Gustavo [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)
2000-07-01
In order that the tools of CAD (Design Attended by Computer) that are offered in the market are really useful, they must combine the criteria and experiences of the expert designers with the specifications and practices established in the electrical company. This includes, from the introduction to the information system of the available input data and its design criteria, to obtaining the required output information. In the present work the methodology developed by the Instituto de Investigaciones Electricas (IIE) in the design of power transmission lines that integrates the Comision Federal de Electricidad (CFE) requirements in the design of its transmission power lines is an advanced computer tool that results in obtaining better designs. Some of the most important aspects are the reduction of the used working time, the cost of the designed line, its reliability, the flexibility in the information handling and the quality of presentation. [Spanish] Para que las herramientas de diseno asistido por computadora que se ofrecen en el mercado sean realmente utiles deben conjuntar los criterios y experiencias de los disenadores expertos con las especificaciones y practicas establecidas en la empresa electrica. Esto incluye desde la introduccion al sistema de la informacion de datos de entrada de la que se dispone y de sus criterios de diseno hasta la obtencion de la informacion de salida que se requiere. En el presente trabajo se resume la metodologia desarrollada por el Instituto de Investigaciones Electricas (IIE) en el diseno de lineas de transmision, que integra los requerimientos de la Comision Federal de Electricidad (CFE) en el diseno de sus lineas de transmision en una herramienta de computo avanzada y que redunda en la obtencion de mejores disenos. Algunos de los aspectos mas importantes son la reduccion del tiempo de trabajo empleado, el costo de la linea disenada, su confiabilidad, la flexibilidad en el manejo de informacion y la calidad de presentacion.
Energy Technology Data Exchange (ETDEWEB)
Canavese, S I; Capadona, N M
1991-12-31
Before the need to store fuel elements of the plate type MTR (Materials Testing Reactors), produced with enriched uranium at 20% in U235 for research reactors, it requires the design of a deposit for this purpose, which will give intrinsic security at a great extent and no complaints regarding its construction, is required. (Author). [Espanol] Partiendo de la necesidad de almacenar elementos combustibles tipo placa MTR (Materials Testing Reactors), producidos con uranio enriquecido al 20% en U235 para reactores de investigacion, se requiere el diseno de un deposito para tal fin que brinde esencialmente un alto grado de seguridad intrinseca y que no ofrezca complicaciones en cuanto a su construccion. (Autor).
Energy Technology Data Exchange (ETDEWEB)
Garcia Chavez, Jose Roberto [Universidad Autonoma Metropolitana, Unidad Azcapotzalco (Mexico)
2007-01-15
This article shows the study performed in a building of Campus Uni dad Azcapotzalco in order to evaluate some bioclimatic design strategies. And to reach the higrothermic comfort and the appropriate lighting to favor employees to increase their performance in work activities. There are some strategies in order to solve this problem: the skylight area reduction, existing lights change, ventilation increase, fixed partition door implementation, etc. The obtained outcomes make possible the beginning of bioclimatic design use to save energy in other buildings, because sometimes edifications possess a design that cause the energy waste. [Spanish] En este articulo se muestra el estudio que se hizo en un edificio en el Campus Unidad Azcapotzalco, el fin de esta labor es evaluar ciertas estrategias de diseno bioclimatico para que las personas que operan en este edificio puedan tener confort higrotermico y una iluminacion pertinente, que den como resultado un mejor desempeno en las tareas que realizan. Algunas de las estrategias para darle solucion a esta problematica son: disminuir del area de lucernarios, cambiar las luminarias existentes, aumentar la ventilacion, implementar canceleria, etc. Con los resultados obtenidos nace la esperanza de que se utilicen estrategias de diseno bioclimatico para ahorrar energia en otros edificios, ya que muchas veces las edificaciones poseen un diseno que unicamente provoca el uso imprudente de la energia.
Jatvia, J M
2002-01-01
"La Universidad de Valencia tiene avanzado el diseno de un acelerador lineal de protones, cuya culminacion depende del compromiso del Consell en sufragar la plantilla que necesitaria el centro para estar operativo" (1 page).
Substations grounding systems design; Diseno de sistemas de conexion a tierra en subestaciones
Energy Technology Data Exchange (ETDEWEB)
Velazquez Sanchez, Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1987-12-31
The grounding systems have been the object of a great number of analytical and experimental studies in the past 15 years, that have given rise to research reports on the several aspects involved in this technique. In this work are briefly reviewed various aspects that is necessary to take into account for its design, analysis and put in operation. [Espanol] Los sistemas de conexion a tierra han sido objeto de gran cantidad de estudios analiticos y experimentales en los pasados quince anos, que han dado origen a informes de investigacion sobre los diversos aspectos que involucra esta tecnica. En este trabajo se revisan brevemente diversos aspectos que es necesario considerar para su diseno, analisis y puesta en operacion.
Substations grounding systems design; Diseno de sistemas de conexion a tierra en subestaciones
Energy Technology Data Exchange (ETDEWEB)
Velazquez Sanchez, Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1986-12-31
The grounding systems have been the object of a great number of analytical and experimental studies in the past 15 years, that have given rise to research reports on the several aspects involved in this technique. In this work are briefly reviewed various aspects that is necessary to take into account for its design, analysis and put in operation. [Espanol] Los sistemas de conexion a tierra han sido objeto de gran cantidad de estudios analiticos y experimentales en los pasados quince anos, que han dado origen a informes de investigacion sobre los diversos aspectos que involucra esta tecnica. En este trabajo se revisan brevemente diversos aspectos que es necesario considerar para su diseno, analisis y puesta en operacion.
Valoración de una empresa no cotizada: Vías y Construcciones S. A.
Rendo Taniñe, Asier
2014-01-01
En este trabajo fin de grado se determina el valor de la empresa no cotizada “Vías y Construcciones S. A.”, cuya actividad principal es la construcción ferroviaria (código CNAE 4211). En primer lugar, se analiza la estrategia competitiva de la empresa constructora analizando su posición relativa dentro del sector. En segundo lugar, utilizando datos pasados se proyectan los flujos de caja libres. Finalmente, se realiza un análisis de sensibilidad sobre los resultados para d...
Energy Technology Data Exchange (ETDEWEB)
Figueroa Castrejon, A. [Universidad Autnoma Metropolitana-Azcapotzalco, Division de Ciencias y Artes para el Diseno, Laboratorio de Arquitectura Bioclimatica (Mexico)
1997-12-31
This paper points out the problems the existing buildings have in its architectonic design and alternatives presented to improve their habitability and energy consumption, making reference to national cases and to the social-economic environment of our country. [Espanol] El presente trabajo senala los problemas que tienen las edificaciones actuales en su diseno arquitectonico y las alternativas que se presentan para mejorar su habitabilidad y consumo energetico, haciendo referencia a los casos nacionales y al entorno socioeconmico de nuestro pas.
Energy Technology Data Exchange (ETDEWEB)
Figueroa Castrejon, A [Universidad Autnoma Metropolitana-Azcapotzalco, Division de Ciencias y Artes para el Diseno, Laboratorio de Arquitectura Bioclimatica (Mexico)
1998-12-31
This paper points out the problems the existing buildings have in its architectonic design and alternatives presented to improve their habitability and energy consumption, making reference to national cases and to the social-economic environment of our country. [Espanol] El presente trabajo senala los problemas que tienen las edificaciones actuales en su diseno arquitectonico y las alternativas que se presentan para mejorar su habitabilidad y consumo energetico, haciendo referencia a los casos nacionales y al entorno socioeconmico de nuestro pas.
Directory of Open Access Journals (Sweden)
Rodríguez, M. A.
2011-09-01
Full Text Available This article shows several points to consider in the study and conservation of the heritage of earth.
We show the most characteristic damages of these buildings and we propose some recommendations for the correct diagnostic of their pathology.
Finally, some recommendations for the conservation of this heritage are given.
En el presente artículo se ponen de manifiesto una serie de aspectos que es necesario tener presente a la hora de acometer un estudio sobre la patología presentada en las construcciones de tierra en general, y patrimoniales en particular.
Para ello, y tras proponer una serie de recomendaciones que contribuyan a un correcto diagnóstico de la patología presentada, se identifican las lesiones más características de este tipo de construcciones.
Por último, se proponen algunas pautas de intervención en función de la patología presentada, así como recomendaciones de carácter general para la conservación del patrimonio de estructuras de tierra.
Una mirada a la Araucanía: construcciones territoriales en la colonización chilena en el siglo XIX
Directory of Open Access Journals (Sweden)
Wladimir Antivil Marinao
2017-05-01
Full Text Available El siguiente trabajo plantea una mirada territorial a la región de la Araucanía en Chile, cuando esta es conformada en la segunda mitad del siglo XIX. En este período, la zona pasa de ser un territorio dominado y construido por las diferentes agrupaciones mapuches a uno dominado y construido por el Estado chileno. Basándose en los relatos que entregan las fuentes históricas y la cartografía elaborada por Nicanor Boloña en 1916 y 1917, se procederá a describir las principales construcciones que dominaron el proceso de ocupación y colonización del territorio, el cual duró varios años. Estas construcciones son: las líneas de fuertes militares, la división del suelo rural y la vía del ferrocarril. La suma de ellas vendrá a dar una nueva fisionomía y ordenación a toda la región. Así, el objetivo de este trabajo es comenzar a entender la Araucanía desde el punto de vista de la construcción de la forma del territorio.
Energy Technology Data Exchange (ETDEWEB)
Mani Gonzalez, A. G.; Arriola Medellin, A. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1997-12-31
The Pinch Analysis is a set of principles, tools and rules for the design that allow the engineer find the best way to configure the elements of a process. In the last ten years it has been utilized for the design of new processes as well as in the energy optimization of existing processes. In this paper the tools utilized for the integration of a cogeneration system in a process for the production of paper is presented. It is also presented how the combined treatment of the Pinch Analysis and the exergy concept allows to define, before the detailed design, the cogeneration potential, the fuel consumption and the amount of pollutant emissions for different cogeneration schemes. [Espanol] El analisis Pinch es un conjunto de principios, herramientas y reglas de diseno que permiten al ingeniero encontrar la mejor manera de configurar los elementos de un proceso. En los ultimos diez anos se ha utilizado para el diseno de procesos nuevos asi como en la optimacion energetica de procesos existentes. En el presente articulo se presentan las herramientas utilizadas para la integracion de un sistema de cogeneracion en un proceso de produccion de papel. Se muestra tambien como el tratamiento combinado del analisis Pinch y el concepto de energia permite definir, antes del diseno detallado, el potencial de cogeneracion, el consumo de combustible y la cantidad de emisiones contaminantes para diferentes esquemas de cogeneracion.
Energy Technology Data Exchange (ETDEWEB)
Mani Gonzalez, A G; Arriola Medellin, A [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1998-12-31
The Pinch Analysis is a set of principles, tools and rules for the design that allow the engineer find the best way to configure the elements of a process. In the last ten years it has been utilized for the design of new processes as well as in the energy optimization of existing processes. In this paper the tools utilized for the integration of a cogeneration system in a process for the production of paper is presented. It is also presented how the combined treatment of the Pinch Analysis and the exergy concept allows to define, before the detailed design, the cogeneration potential, the fuel consumption and the amount of pollutant emissions for different cogeneration schemes. [Espanol] El analisis Pinch es un conjunto de principios, herramientas y reglas de diseno que permiten al ingeniero encontrar la mejor manera de configurar los elementos de un proceso. En los ultimos diez anos se ha utilizado para el diseno de procesos nuevos asi como en la optimacion energetica de procesos existentes. En el presente articulo se presentan las herramientas utilizadas para la integracion de un sistema de cogeneracion en un proceso de produccion de papel. Se muestra tambien como el tratamiento combinado del analisis Pinch y el concepto de energia permite definir, antes del diseno detallado, el potencial de cogeneracion, el consumo de combustible y la cantidad de emisiones contaminantes para diferentes esquemas de cogeneracion.
Construcciones a base de tierra
Directory of Open Access Journals (Sweden)
Alvarez Alonso, Marina
1984-11-01
oriented towards dissipating possible prejudices which exist with regard to earthen constructions.Trabajo realizado y basado en las nuevas posibilidades de las construcciones con tierra, una vez considerado su interés en épocas anteriores y las nuevas posibilidades que ofrece ante la crítica impuesta por la crisis de la energía. Se hacen consideraciones sobre las necesidades de vivienda previstas hasta el año 2000 y otros parámetros que vuelven a ser importantes al confrontarlos económicamente con los materiales industrializados, sistemas de construcción, soluciones orientadas a los países en vías de desarrollo, etc. Continúa el trabajo con las primeras vías de experimentación práctica desarrolladas por el equipo de trabajo de viviendas de bajo coste orientadas a la búsqueda y promoción de recursos locales y abundantes como el material tierra, vías de experimentación que comienzan con el conocimiento por el equipo de técnicas y materiales durante el curso realizado en Ciadueña (Soria. Se describen aspectos técnicos del material tierra desarrollados paralelamente a la experiencia práctica inicial y orientada a la elección idónea de los componentes, una vez confrontada la información bibliográfica relacionada con el tema. Entre las consideraciones técnicas se llega a una exposición más exhaustiva sobre: 1 Las técnicas existentes: ladrillos de adobe, tierra apisonada (tapial, etc. 2 Porcentajes idóneos de los componentes para la elección de los materiales preferibles en cada una de las técnicas anteriores. 3 Consideraciones de los aspectos físicos y mecánicos de la maquinaria existente y en experimentación, así como de las posibilidades respecto a su puesta en obra, costes comparativos, etc. 4 Estudio de las posibilidades para mejorar las características del material tierra mediante diferentes técnicas de estabilización (compactación y correcciones granulométricas, estabilizantes fisicoquímicos, betunes, productos
Energy Technology Data Exchange (ETDEWEB)
Hernandez Roman, M. A; Pineda Pinon, J; Arcos Pichardo, A [CICATA, Santiago de Queretaro, Queretaro (Mexico)
2013-03-15
The oven construction consists of a solar collector system of cylindrical parabolic type, a heating through electrical resistance and a curing chamber. The warm fluid is air, which is injected into the chamber through forced draft. The temperature required in the system is within a range of 150 to 300 degrees Celsius. [Spanish] La construccion del horno consta de un sistema de captacion solar del tipo cilindrico parabolico, un sistema de calentamiento a traves de resistencias electricas y una camara de curado. El fluido a calentar es aire, el cual es inyectado dentro de la camara a traves de tiro forzado. La temperatura solicitada en el sistema es dentro de un rango de 150 a 300 grados centigrados.
Energy Technology Data Exchange (ETDEWEB)
Figueroa Ibarra, Luis; Rodriguez Martinez, Jose Hugo; Santabarbara Botello, Marcelino [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)
2007-07-01
In this article the design of a novel measuring device of water flowing in large diameter pipes is described. A description is made of the instrument commonly used at present for this purpose (simple Pitot tube), whose design is based on the Standard CTI Code ATC-105 published by the Cooling Tower Institute (CTI ATC-105, 2000). The disadvantages of the simple Pitot tube in comparison with the new proposed device are emphasized (Multi-gate Pitot tube), of which its construction and design is described in detail. In the present article are also shown the results obtained of the circulation water flow measurements, performed in the cooling system of a fossil fuel power plant. These results are compared with the results of flow measurement obtained by means of the simulation of the thermodynamic cycle of the power station, using commercial software. [Spanish] En este articulo se describe el diseno de un novedoso medidor de flujo de agua que circula en tuberias de gran diametro. Se hace una descripcion del instrumento comunmente usado en la actualidad para dicho proposito (tubo de Pitot simple), cuyo diseno se basa en el estandar CTI Code ATC-105 publicado por el Cooling Tower Institute (CTI ATC-105, 2000). Se puntualizan las desventajas del tubo de Pitot simple en comparacion con el nuevo dispositivo propuesto (tubo de Pitot Multi-puertos), del cual se describe detalladamente su construccion y diseno. En el presente articulo tambien se muestran los resultados obtenidos de las mediciones de flujo de agua de circulacion, realizadas en el sistema de enfriamiento de una central termoelectrica. Dichos resultados son comparados con los resultados de flujo obtenidos mediante simulacion del ciclo termodinamico de la central, usando un software comercial.
Directory of Open Access Journals (Sweden)
Josefina González-Cubero
2017-11-01
Full Text Available RESUMEN A finales de los años 50 se publican dos libros dedicados al Plan Nacional de Construcciones Escolares del Ministerio de Educación Nacional, relativos a las Escuelas rurales y viviendas de maestros y a las Escuelas Graduadas respectivamente, que ponen a España en sintonía con los trabajos que se vienen realizando por organizaciones internacionales en aras de escolarizar a la población infantil y mejorar las condiciones de la enseñanza. Al contener los prototipos elaborados en sendos concursos para servir de instrumento en la construcción de tales establecimientos en todo el país, los libros muestran el deseo de cambio que recorre la arquitectura española y apuntan el camino futuro a seguir, dando también fe de la forja de arquitectos escolares que realizan relevantes obras en su trayectoria posterior.
Energy Technology Data Exchange (ETDEWEB)
Arellano Gomez, Victor [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)
1999-07-01
The Instituto de Investigaciones Electricas (IIE) through the Management of Geotermics has developed technologies that have allowed the utilization of the existing natural thermal energy from inside the Earth. In this article the developments made in this management are presented among which are the following ones: development of geotermometer of cationic composition (GCC), development of an Anapress system, and design and construction of mixed permeameter gas - liquid. [Spanish] El Instituto de Investigaciones Electricas (IIE) a traves de la Gerencia de Geotermia ha desarrollado tecnologias que han permitido el aprovechamiento de la energia termica natural existente en el interior de la tierra. En este articulo se presentan los desarrollos realizados en esta gerencia entre los cuales se encuentran los siguientes: desarrollo de un geotermometro de composicion cationica (GCC), desarrollo de un sistema Anapres, y diseno y construccion de un permeametro mixto gas - liquido.
Intelligent buildings vs. bioclimatic design; Edificios inteligentes vs. diseno bioclimatico
Energy Technology Data Exchange (ETDEWEB)
Aguayo Gonzalez, Ricardo [Tecnologico de Monterrey (Mexico)
2006-10-15
Present the form of intelligent buildings designing is the article purpose. Those kinds of edifications take advantage of climatic conditions which allow the users comfort and the efficient electric power use, avoiding the polluting agents. It also shows the four next following stages to design an intelligent building to know: the dry weather and relative dampness schedule variations during a year in the building location; the predominant winds direction, intensity and schedule frequency; the cloudiness, rain, etc and how to use the Givoni diagram to obtain the natural air-conditioning strategies and reach the thermal comfort. [Spanish] El proposito de este articulo es presentar la forma de disenar edificios Inteligentes, los cuales aprovechan las condiciones climaticas que permiten el confort de los usuarios y el uso eficiente de la energia electrica, evitando asi la emision de agentes contaminantes. Tambien menciona los siguientes cuatro pasos para el diseno de un edificio inteligente: conocer las variaciones horarias de temperatura seca y humedad relativa durante un ano en el lugar donde estara el edificio, saber la direccion, intensidad y frecuencia horaria de los vientos dominantes, tener conocimiento de la nubosidad, lluvia, etc. y utilizar el diagrama de Givoni para obtener las estrategias de climatizacion natural para obtener el confort termico.
Energy Technology Data Exchange (ETDEWEB)
Garcia Andrade, R; Lopez Villalobos, J.J; Valderrama Chairez, J; Ramirez, R.L. [Instituto Tecnologico de Nuevo Leon, Guadalupe, Nuevo Leon (Mexico)]. E-mails: roxana_garciaandrade@yahoo.com; xe2n@yahoo.com.mx; jose.valderrama@ieee.org
2013-03-15
This paper discusses the design of a voltage controller for an air conditioning system in order to generate additional power in activation or startup of the system, for which as a first stage is presented the modeling power generation of electric current through alternative means, such as solar energy. The results of this study will be the basis for development of the physical prototype of this system controller. [Spanish] El presente trabajo trata sobre el diseno de un controlador de voltaje para un sistema de aire acondicionado con el fin de generar energia adicional en la activacion o arranque de dicho sistema, para lo cual como primer fase se presenta el modelado de la generacion de corriente electrica mediante medios alternos, como lo es la energia solar. Los resultados de este trabajo seran la base para desarrollo del prototipo fisico de este sistema controlador.
Diseno y construccion de un espectrometro NIR; Design and construction of a NIR spectrometer
Energy Technology Data Exchange (ETDEWEB)
Barcala Riveira, J M; Fernandez Marron, J L; Alberdi Primicia, J; Molero Menendez, F; Navarrete Marin, J J; Oller Gonzalez, J C
2003-07-01
This document describes the design and construction of a NIR spectrometer based on an acoustic-optic tunable filter. The spectrometer will be used for automatic identification of plastics in domestic waste. The system works between 1200 and 1800 nm. Instrument is controlled by a personal computer. Computer receives and analyses data. A software package has been developed to do these tasks. (Author) 27 refs.
Ortiz Benavides, Fedra Lorena
El proposito de la investigacion fue evaluar la efectividad de una actividad de aprendizaje basado en la argumentacion dialogica en linea y su incidencia en el desarrollo de competencias cientificas. Se fundamenta en la teoria del aprendizaje socio cultural de Vigotsky (1984), los principios del diseno instruccional de la cognicion situada por Hung y Der-Thang (2001) y como estrategia se aplico la argumentacion dialogica utilizando el Modelo Argumentativo de Toulmin MAT (1984). El diseno experimental comparo dos grupos de estudiantes A y B en el curso virtual de Biotecnologia. El grupo A (experimental) desarrollo la discusion a partir de la estrategia disenada para este estudio y el grupo B (control) realizo la discusion desde las actividades tradicionales. El desarrollo de la competencia argumentativa se valoro con el instrumento de evaluacion para argumentacion dialogica en linea propuesta por Clark y Sampson (2008). La evaluacion de las competencias cientificas se realizo a partir de una postprueba. Los datos fueron analizados con pruebas estadisticas no parametricas. Los resultados de la investigacion, indicaron diferencias significativas en el nivel de la competencia argumental en el grupo experimental en comparacion al grupo control. Igualmente se demostro que existe una relacion positiva entre el nivel de desarrollo de la competencia argumentativa y el nivel de desarrollo de las competencias cientificas.
Demarchi, Paola Vanesa; Universidad Nacional de Río Cuarto (Argentina)
2015-01-01
Este artículo trata acerca del carácter “natural” y evidente que adquieren en las sociedades modernas las construcciones discursivas sobre lo esperable y deseable para la ciudad y sobre aquellos aspectos considerados problemáticos para las normas de urbanidad convenidas. Me interesa identificar y analizar las concepciones sobre el orden urbano y las emergencias sociales que se manifiestan a lo largo del siglo XX en los tratamientos informativos de la prensa riocuartense, y cómo el clima de la...
Energy Technology Data Exchange (ETDEWEB)
Gomez Camargo, Octavio [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)
2007-07-01
marinas se estan disenando con herramientas CAD, por lo que antes de su instalacion cuentan con un modelo 3D, el cual se va actualizando conforme avanza el diseno, hasta llegar a la version aprobada para construccion. Posteriormente, el modelo digital de la plataforma marina sirve para guiar en la construccion y dar seguimiento al avance de la misma. De igual forma, el modelo 3D se debe de actualizar respecto a los cambios surgidos durante la construccion e instalacion, hasta la puesta en servicio de la plataforma, sin embargo, muchas de estas fueron construidas cuando aun no se disponia de estas herramientas, por lo que se torna necesario construir el modelo digital de acuerdo al estado actual que presenten. Para desarrollar el modelo digital de las plataformas marinas en operacion, las actividades se agrupan en tres grandes etapas: especificacion de alcance, recuperacion de informacion y modelado.
Energy Technology Data Exchange (ETDEWEB)
Palomares Gonzalez, Daniel; Ricano Castillo, Juan Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1990-12-31
In this paper are designed an analyzed the control ties of a 300MW fossil unit at different operation levels. The design and analysis were developed on an operation range of 50% to 100% load. The main control ties were studied among which are the feedwater flow, the superheating zone temperatures and the generated output. The technique used for the design is the decomposition in singular values (DSV) of the plant transference matrix. This is a recent technique that permits finding the most important interactions among output-input variables, over a significative frequencies range for the transference matrix of the plant. For this purpose utilizes the control properties of the transference matrix, such as: control effort, output-input interaction and ruggedness with respect to uncertainties. The control structures obtained were tested in a digital model of a fossil plant unit. A comparison study of both structures (original and modified) showed enhancement in the performance of the power plant with modified structure. [Espanol] En este trabajo se disenan y analizan los lazos de control de una unidad termoelectrica de 300 MW, a diferentes niveles de operacion. El diseno y analisis se desarrollo sobre un rango de operacion de 50 a 100 por ciento de carga. Se estudiaron los principales lazos de control entre los que se encuentran el flujo de agua de alimentacion, las temperaturas de la zona de sobrecalentamiento y la potencia generada. La tecnica utilizada para el diseno es la descomposicion en valores singulares (DVS) de la matriz de transferencia de la planta. Esta es una tecnica reciente que permite encontrar las interacciones mas importantes entre variables entrada-salida, sobre un rango de frecuencias significativas para la matriz de transferencia de la planta. Utiliza para ello las propiedades de control de la matriz de transferencia, como son: esfuerzo de control, interaccion entrada-salida y robustez con respecto a incertidumbres. Las estructuras de control
Energy Technology Data Exchange (ETDEWEB)
Palomares Gonzalez, Daniel; Ricano Castillo, Juan Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1989-12-31
In this paper are designed an analyzed the control ties of a 300MW fossil unit at different operation levels. The design and analysis were developed on an operation range of 50% to 100% load. The main control ties were studied among which are the feedwater flow, the superheating zone temperatures and the generated output. The technique used for the design is the decomposition in singular values (DSV) of the plant transference matrix. This is a recent technique that permits finding the most important interactions among output-input variables, over a significative frequencies range for the transference matrix of the plant. For this purpose utilizes the control properties of the transference matrix, such as: control effort, output-input interaction and ruggedness with respect to uncertainties. The control structures obtained were tested in a digital model of a fossil plant unit. A comparison study of both structures (original and modified) showed enhancement in the performance of the power plant with modified structure. [Espanol] En este trabajo se disenan y analizan los lazos de control de una unidad termoelectrica de 300 MW, a diferentes niveles de operacion. El diseno y analisis se desarrollo sobre un rango de operacion de 50 a 100 por ciento de carga. Se estudiaron los principales lazos de control entre los que se encuentran el flujo de agua de alimentacion, las temperaturas de la zona de sobrecalentamiento y la potencia generada. La tecnica utilizada para el diseno es la descomposicion en valores singulares (DVS) de la matriz de transferencia de la planta. Esta es una tecnica reciente que permite encontrar las interacciones mas importantes entre variables entrada-salida, sobre un rango de frecuencias significativas para la matriz de transferencia de la planta. Utiliza para ello las propiedades de control de la matriz de transferencia, como son: esfuerzo de control, interaccion entrada-salida y robustez con respecto a incertidumbres. Las estructuras de control
Una mirada a la Araucanía: construcciones territoriales en la colonización chilena en el siglo XIX
Wladimir Antivil Marinao
2017-01-01
El siguiente trabajo plantea una mirada territorial a la región de la Araucanía en Chile, cuando esta es conformada en la segunda mitad del siglo XIX. En este período, la zona pasa de ser un territorio dominado y construido por las diferentes agrupaciones mapuches a uno dominado y construido por el Estado chileno. Basándose en los relatos que entregan las fuentes históricas y la cartografía elaborada por Nicanor Boloña en 1916 y 1917, se procederá a describir las principales construcciones qu...
Energy Technology Data Exchange (ETDEWEB)
Buendia Dominguez, Eduardo H; Alvarez Chavez, Jose M [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1990-12-31
This paper describes the computer program named SILRA, that determines the outline dimensions of an acoustic steam silencer of the reaction-absorption type. These silencers are employed in the geothermoelectric power plants to lower the high levels of pressure and sound caused by the steam discharge to the surrounding atmosphere. The program has the capacity of predicting the noise level generated by the discharge without silencer depending on the emitting source. On SIRLA was successfully coupled the theory described in specialized literature with optimization techniques and experiences acquired in former designs. SIRLA is a powerful tool that allows the designer to optimize the equipment as well as the design time. [Espanol] En este trabajo se describe el programa de computo SILRA, que determina las dimensiones generales de un silenciador acustico de vapor tipo reaccion-absorcion, estos silenciadores se emplean en las centrales geotermoelectricas para abatir los altos niveles de presion de sonido provocados por la descarga del vapor a la atmosfera. El programa tiene la capacidad de predecir el nivel de ruido que genera la descarga sin silenciador, dependiendo de la fuente emisora. En SILRA se acoplaron con exito la teoria descrita en la literatura especializada con tecnicas de optimacion y experiencias adquiridas en disenos anteriores. SILRA es una poderosa herramienta que permite al disenador optimar tanto el equipo como el tiempo de diseno.
Energy Technology Data Exchange (ETDEWEB)
Buendia Dominguez, Eduardo H.; Alvarez Chavez, Jose M. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1989-12-31
This paper describes the computer program named SILRA, that determines the outline dimensions of an acoustic steam silencer of the reaction-absorption type. These silencers are employed in the geothermoelectric power plants to lower the high levels of pressure and sound caused by the steam discharge to the surrounding atmosphere. The program has the capacity of predicting the noise level generated by the discharge without silencer depending on the emitting source. On SIRLA was successfully coupled the theory described in specialized literature with optimization techniques and experiences acquired in former designs. SIRLA is a powerful tool that allows the designer to optimize the equipment as well as the design time. [Espanol] En este trabajo se describe el programa de computo SILRA, que determina las dimensiones generales de un silenciador acustico de vapor tipo reaccion-absorcion, estos silenciadores se emplean en las centrales geotermoelectricas para abatir los altos niveles de presion de sonido provocados por la descarga del vapor a la atmosfera. El programa tiene la capacidad de predecir el nivel de ruido que genera la descarga sin silenciador, dependiendo de la fuente emisora. En SILRA se acoplaron con exito la teoria descrita en la literatura especializada con tecnicas de optimacion y experiencias adquiridas en disenos anteriores. SILRA es una poderosa herramienta que permite al disenador optimar tanto el equipo como el tiempo de diseno.
Energy Technology Data Exchange (ETDEWEB)
Cortes Campos, Carlos Cristobal [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Montes Tadeo, Jose Luis [Instituto Nacional de Investigaciones Nucleares (ININ), Salazar (Mexico)
1991-12-31
It is described, in general terms, the procedure that is followed to accomplish the optimization of the recharge design, and an example is shown where this procedure was applied for the analysis of the type BWR reactor of Unit No. 1 of the Laguna Verde Nuclear Power Station. [Espanol] Se describe en terminos generales el procedimiento que se sigue para realizar la optimacion del diseno de recargas, y se muestra un ejemplo en el que se utilizo dicho procedimiento para el analisis del reactor tipo BWR de la unidad 1, de la Central Laguna Verde (CLV).
Energy Technology Data Exchange (ETDEWEB)
Cortes Campos, Carlos Cristobal [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Montes Tadeo, Jose Luis [Instituto Nacional de Investigaciones Nucleares (ININ), Salazar (Mexico)
1992-12-31
It is described, in general terms, the procedure that is followed to accomplish the optimization of the recharge design, and an example is shown where this procedure was applied for the analysis of the type BWR reactor of Unit No. 1 of the Laguna Verde Nuclear Power Station. [Espanol] Se describe en terminos generales el procedimiento que se sigue para realizar la optimacion del diseno de recargas, y se muestra un ejemplo en el que se utilizo dicho procedimiento para el analisis del reactor tipo BWR de la unidad 1, de la Central Laguna Verde (CLV).
Energy Technology Data Exchange (ETDEWEB)
Carmona Paredes, G.; Chicurel Uziel, R.; Chicurel Uziel, E.; Gutierrez Martinez, F. [Instituto de Ingenieria, UNAM, Mexico, D.F. (Mexico)
2002-09-01
Eight years ago, project to develop a small battery powered electric bus, known today as UNAM's Electric Vehicle, was started at the Engineering Institute. This project was followed by the design and construction, under an agreement with the Mexico City Government, of the Electrobus, a public transport vehicle that was recently put in operation and is being evaluated by the City's Electric Transportation Service. Two other projects, within the scope of UNAM's Electric Vehicle Development Program refer to light trucks: the Electrovira, characterized by exceptional maneuverability, and the Electric Delivery Vehicle. These projects are being carried out respectively by the Engineering Institute and the School of Engineering's Center for Design and Manufacture. Other parties that have collaborated in the program are: the School of Architecture's Center for Research in Industrial Design, the Instruments Center, and the School of Chemistry. Work is also being done on complementary aspects which include the development of an intelligent charger for large battery packs and of a dual electronic controller, a study of the dynamic performance of lead-acid batteries, the design of a battery monitoring system, and the search for new battery alternatives. [Spanish] Hace ocho anos, el Instituto de Ingenieria inicio el proyecto de desarrollo de un minibus electrico de baterias, conocido ahora como el Vehiculo Electrico UNAM. Este proyecto fue seguido de un convenio con el Gobierno del Distrito Federal para el diseno y construccion del Electrobus, un vehiculo para transporte publico que recientemente fue puesto en operacion para ser evaluado por el Servicio de Transporte Electrico del DF. Dos proyectos mas, enmarcados dentro del Programa de Desarrollo de Vehiculos Electricos, se refieren a vehiculos ligeros de carga como el Electrovira, caracterizado por su gran maniobrabilidad y el Vehiculo Electrico de Reparto. Estos proyectos se realizan respectivamente
Construcciones agrarias en madera: una ventaja en la integración en el paisaje
Directory of Open Access Journals (Sweden)
Cañas Guerrero, Ignacio
1991-02-01
Full Text Available Aesthetic values conservation are more important every day. Wooden constructions are better for this conservation.
Construction impact on landscape can be analyzed by two ways; Synthetic and Analytic methods.
Using at first a list of wood adventages (based in comparing photographs can be found. It is a natural material and it can be selected a great kind of textures and colours, visual, auditory tactile, smelling and gustative comfort is provided. Psychological factors are in favour of wooden constructions. Assembling and demolition cause less landscape impact.
Nevertheless, Analytic method are based on physics and aesthetics components analysis. Physics components are walls materials, buildings distribution and services in buildings. Aesthetics components are shape, sacale. line and colour in a first group and texture in a second. Otherwise the texture wood has different posibilities, its own nature, finished treatement and boards position.
La conservación de los valores estéticos del paisaje cobran cada día más importancia; en este aspecto las construcciones en madera aportan una serie de ventajas.
Para analizar el impacto de las construcciones contamos con dos métodos: Sintético y Analítico.
En el primero, basado en el estudio de pares de fotografías, encontramos que la madera tiene una serie de ventajas: es un material natural, ofrece una variedad de colores y texturas, posee confortabilidad visual, auditiva, táctil, olfativa y gustativa, intervienen favorablemente factores sicológicos, se provoca un menor impacto paisajístico a la hora del montaje con un envejecimiento más noble y, llegado el momento, una mayor facilidad para su demolición.
El Analítico, sin embargo, se basa en el estudio de los componentes físicos y estéticos. Dentro de los componentes físicos se consideran los materiales, los cerramientos y la distribución de los edificios y obras accesorias. En los componentes estéticos hablamos de la
Energy Technology Data Exchange (ETDEWEB)
Lira Cortes, Leonel; Xaman Villasenor, Jesus P; Chavez Chena, Yvonne [CENIDET: Centro Nacional de Investigacion y Desarrollo Tecnologico, Cuernavaca, Morelos (Mexico)
2000-07-01
en la industria de la construccion. Sin embargo actualmente en Mexico no existen datos reportados de los materiales que se fabrican y utilizan en nuestro pais, por lo que se opta por tomar los resultados reportados en la literatura, cuyos valores en su mayoria no corresponden a los materiales mexicanos. Con objeto de cubrir esta necesidad, en el CENIDET se desarrollo un instrumento para determinar la conductividad termica de materiales aislantes y de construccion. A la fecha se han venido realizando estudios a diferentes materiales, los cuales son proporcionados por los fabricantes, con la intencion de obtener datos de conductividad termica reales y aplicarlos con entera confianza en simulaciones de calculos de cargas termicas. En este trabajo se presentan los resultados de medicion de la conductividad termica aparente de dos diferentes materiales de construccion, bloque de piedra pomez y bloque de tezontle. La medicion se realizo con un instrumento absoluto y primario conforme a la norma ANSI/ASTM C-177-97. El principio de operacion del aparato se basa en la tecnica de transferencia de calor por conduccion en estado permanente entre dos placas, el experimento se lleva a cabo usando un aparato de placa caliente con guarda (APCG). Dada la zona geografica en la que se pretenden utilizar los dos materiales estudiados, se concluye que los resultados obtenidos muestran mejores propiedades para ambos con respecto a los valores reportados de los materiales similares, en virtud de que estos materiales se piensan aplicar en un clima humedo como lo es el estado de Puebla, Mexico.
EVALUACIÓN DE LA GESTIÓN DE SUSTENTABILIDAD Y SEGURIDAD EN CONSTRUCCIONES DE VIVIENDA EN MÉXICO
Directory of Open Access Journals (Sweden)
Marco Antonio Ramos Corella
2016-06-01
Full Text Available Se presentan los resultados de la aplicación de un modelo para determinar el nivel de gestión de sustentabilidad y seguridad en construcciones de vivienda en México. Ésta evaluación se determina mediante la aplicación de criterios y parámetros con los cuales se mide el grado de compromiso de la gestión del proyecto con el medio ambiente, y con la seguridad de los involucrados en él, desde la etapa de diseño hasta la demolición o desmontaje final. Los criterios utilizados en este modelo tienen dos funciones: medir lo realizado hasta el momento e indicar qué debe hacerse para corregir las debilidades encontradas. Además pueden utilizarse como pautas a seguir para planear proyectos futuros y evitar problemas de gestión.
Energy Technology Data Exchange (ETDEWEB)
Loyola-Morales, F.; Cano-Castillo, U. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: feloyola@yahoo.com.mx
2009-09-15
The flow field (FF) designs of bipolar plates play a fundamental role in the performance of a set of PEM fuel cells. The FF is directly related with diverse processes that occur inside the cells, such as: feeding and uniform distribution of reactant gases and the handling of water produced by the overall electrochemical reaction. Therefore, a FF design that promotes each one of those processes in an optimal manner is of utmost importance to attain the best performance of a set of fuel cells. The present work evaluated the impact of two different FF on the performance of a fuel cell. The FF designs evaluated were 4 serpentine and parallels (4SP) and 2 serpentine counter flow (SC). The stability tests for the operation of the cell applied to each of the flow fields were: flood tolerance, dehydration tolerance conditions and stoichiometry performance of 1.1, 1.3, 1.5 and 2.5. The 4SP design showed high performance stability during operation with a gradual process of flooding the system and operating at different stoichiometries. Only for the test with dehydration conditions was there a gradual decrease in its performance, of up to 27%. Compared to these results, the SC design showed a rapid fall of 45% in its performance when operating under gradual flooding of the system, a constant fall in its performance (also around 45%) with stoichiometries of 1.1, 1.3 and 1.5 due to accumulation of water, and only with a stoichiometry of 2.5 did it have highly stable performance as a result of good water handling. In the test of operations under dehydration conditions, the performance of the SC design dropped to 40% and remained at this value during the rest of the test. According to these results, the performance of the 4SP design was more stable than the SC design for all of the tests implemented. [Spanish] Los disenos de campo de flujo (CF) de las placas bipolares tienen un papel fundamental en el desempeno de un conjunto de celdas de combustible tipo PEM. Los CF tienen una
Directory of Open Access Journals (Sweden)
Yuri Chávez Plazas
2014-01-01
Full Text Available La experiencia del desplazamiento4 constituye un evento estresor que vulnera significativamente a quienes lo padecen, bien sea por desastres naturales o por acción de grupos armados, y porque la llegada a los nuevos sitios plantea el reto de comenzar una nueva vida. El artículo integra los resultados de las investigaciones realizadas en el municipio de Soacha,5 Colombia y en la región del Chaité, en Chile6 con poblaciones víctimas de desplazamiento, y se acerca a las construcciones sociales de la masculinidad en hombres migrantes. A través de las entrevistas realizadas, se encontró que ante esta experiencia se configuran nuevos modelos para responder a las exigencias familiares y comunitarias.
New build methodology approach by Iberdrola Ingenieria y Construccion
International Nuclear Information System (INIS)
Zornoza Garcia-Andrade, Javier; Ignacio Diaz Prade, Jose; Martinez Gozalo, Ignacio; Merino Teillet, Alejandro
2014-01-01
Iberdrola Ingenieria y Construccion (hereinafter IEC) has developed a significant number of projects in several nuclear plants worldwide. Some of these plants are under operation, while others are under construction. Nowadays, IEC is actively participating in the design and construction of some safety and non-safety class systems of Flamanville 3, for EDF, has actively participated for OL4 (Finland) in one of the Nuclear Island (NI) proposal development covering for example complete NI supply chain and Licence Feasibility Study stages. Also, in the UK IEC has developed site characterization, licensing and heat sink analysis and supply chain development activities for NUGEN and is performing support engineering activities for HGNE for Wylfa. In addition, IEC performed the project for the refurbishment of Laguna Verde 1 and 2 turbine islands in Mexico, with a budget above 600 M USD. Nowadays, successful development of a new nuclear plant project in Europe, with stringent regulatory requirements for licensing and permitting which directly impact in the development of design, supply, construction and commissioning, requires successful integration of these processes by Regulatory Authority, Customer, Main Supplier and its entire supply chain. The soft integration of design, supply chain, construction and commissioning in the entire project development, will permit the application of advanced construction and engineering methodologies, as for example 'Open Top' construction or modular design, while minimizing regulatory delays. This integration represents one of the main challenges to minimize nuclear projects risk in order to successfully develop the project of a new plant considering a construction period of less than 5 year. Current paper provides a short description of proposed methodology and experiences of IEC, exposing several examples taken from actual experience in the design, supply and installation of systems in Flamanville 3 and from Olkiluoto 4
Energy Technology Data Exchange (ETDEWEB)
Zeevaert Wiechers, L. [Facultad de Ingenieria, UNAM, Mexico, D.F. (Mexico)
2005-03-01
The experience has indicated the importance in the seismic behavior of buildings and in the structural problems taking place in the upper floors of tall buildings, during destructive earthquakes. The interest has aroused in the application of the Seismo geodynamics Theory to solve the seismic problems of the subsoil and foundations, and the method to calculate the acceleration in the floors of buildings because of the seismic effect of the vertical and horizontal rotations of the foundation, and to verify if the structure of the building can take safe the seismic forces. An important seismic observation was made by the author in 1962, from the recorded seudo-acceleration response spectrums, obtained at the ground surface of the Central Park and those obtained at the base of the rigid foundation of the Tower Latino American in Mexico City. The author found that the ratio of the accelerations for 10.0% critical damping between these two places, less than one hundred meters apart, showed that the rigid box type foundation of the Tower Latino suffered only on the order of 50% to 60% of the acceleration with respect to the spectral acceleration at the ground surface in the Central Park. The above observation was verified theoretically by the author. [Spanish] La experiencia ha indicado la importancia que tiene el comportamiento sismico de los edificios y los problemas estructurales que se ocasionan en los pisos altos durante sismos destructivos. Se ha despertado interes en la aplicacion de la Teoria de la sismo-geodinamica para resolver problemas sismicos del subsuelo y cimentaciones, ademas del metodo para calcular la aceleracion en los pisos de los edificios, debido a la accion sismica que produce la rotacion vertical horizontal de la cimentacion, y asi verificar si la estructura del edificio puede tomar con seguridad las fuerzas sismicas. Una observacion importante fue hecha por el autor en el ano de 1962, en registros de los espectros de respuesta de seudo
Conceptos de diseño para manufactura (DFM de piezas microfundidas
Directory of Open Access Journals (Sweden)
Carlos Julio Cortés Rodríguez
2005-09-01
Full Text Available Una de las metodologIas utilizadas por la ingenierIa concurrente o diseno integrado de productos es el diseno para manufactura, DEM. Esta técnica, que está orientada a melorar la fabricación de piezas analizando geometrIas, valores y tolerancias, es utilizada en las primeras etapas de diseno para disminuir los costos de los elementos a fabricar. Se estudió el diseno para manufactura estableciendo reglas de diseno a fin de elaborar una metodologIa para diseno en microfundición.
Directory of Open Access Journals (Sweden)
Marcelo Afonso Ribeiro
2012-11-01
Full Text Available Los estudios de identidad en el trabajo han indicado la existencia de una crisis identitaria generada por la flexibilidad laboral, provocando su desestructuración y restructuración y convirtiendo la identidad en el trabajo en construcciones identitarias procesales. A través de una investigación cualitativa con entrevistas en profundidad, se buscó identificar las construcciones identitarias en el trabajo contemporáneo, realizando un análisis de contenido de los relatos de 40 trabajadores de Sao Paulo en Brasil, mayores de 35 años, seleccionados intencionadamente. Las construcciones identitarias se basaron en 4 categorías (nostalgia, cierre, posibilidad e instrumental organizadas según la sistematización de los tipos identitarios descritos en la literatura. Los resultados mostraron la potencialidad del uso de tipologías, existiendo 2 movimientos antagónicos en las construcciones identitarias: la búsqueda de estabilidad (nostalgia o de flexibilidad (posibilidad, con el debilitamiento de las identidades profesionales y ocupacionales (cierre. También se identificaron los límites de esta tipología, al constatar que el tipo identitario instrumental no es permanente, sino una situación transitoria, y que existen tipos híbridos y mixtos que no estaban previstos en la sistematización propuesta.Studies of identity at work have indicated the existence of an identity crisis generated by labor flexibility, leading to its destructuring and restructuring and transforming identity at work into processual identity constructions. Through qualitative research with in-depth interviews, the study aimed to identify the identity constructions present in contemporary work, performing a content analysis of the narratives generated by 40 workers over 35 years old in Sao Paulo, Brazil, selected intentionally. Identity constructions were based on 4 categories (nostalgia, closure, possibility and instrumentality organized according to the systematization
Energy Technology Data Exchange (ETDEWEB)
Sacristan Roy, Antonio [Asociacion Mexicana para la Economia Energetica (AMEE), (Mexico)
2004-06-15
A scenario is a logical and congruent narration on the future, which describes the future in terms of the consequences on the surroundings of tendency forces (descriptive scenario) or as a result of caused changes (normative scenario). Unlike an econometric projection, that fundamentally considers economic forces, a scenario takes into consideration the impact of political, technological, social and legal forces, in addition to the economic ones, and the uncertainty of the future can be covered using several different scenarios. The construction of scenarios constitutes an extremely useful tool for long term planning of and the design of governmental policies for the energy sector. In this work an investment to twenty-five years in the national energy sector, with a long term planning of using scenarios, the design of a policy of the possible savings and bases for the future technological development and investigation effort is estimated. [Spanish] Un escenario es una narracion logica y congruente sobre el futuro, la cual describe el futuro en terminos de las consecuencias sobre el entorno de fuerzas tendenciales (escenario descriptivo) o como resultado de cambios provocados (escenario normativo). A diferencia de una proyeccion econometrica, que fundamentalmente considera fuerzas economicos, un escenario toma en consideracion el impacto de fuerzas politicas, tecnologicas, sociales y juridicas, ademas de las economicas, la incertidumbre del futuro se puede cubrir utilizando varios escenarios distintos. La construccion de escenarios constituye una herramienta sumamente util para la planeacion de largo plazo y el diseno de politicas gubernamentales para el sector energetico. En este trabajo se estima una inversion a veinticinco anos en el sector energetico nacional, con una planeacion de largo plazo utilizando escenarios, el diseno de una politica los posibles ahorros y la base para el futuro desarrollo tecnologico y esfuerzo de investigacion.
Directory of Open Access Journals (Sweden)
Varum, H.
2011-09-01
predominante durante la primera mitad del siglo XX. En la actualidad es aún significativo el legado del patrimonio – cerca de 30% de las construcciones existentes – el cual está formado por un conjunto significativo de construcciones de elevado valor histórico y arquitectónico. En las últimas décadas se ha descuidado su rehabilitación, que ha redundado en el estado actual de daño en muchas de estas construcciones, con desfavorables condiciones de seguridad, y en algunos casos comprometiendo su uso. No obstante, en los últimos años, se observa un creciente interés, asociado a factores ambientales, económicos y de salvaguarda del patrimonio, tanto por parte de las administraciones locales como en el ámbito de los inversores privados, por la conservación y rehabilitación de estas construcciones. Ante esta nueva realidad, que pone de manifiesto la necesidad de desarrollar soluciones y técnicas de intervención que permitan, a través de la rehabilitación y/o refuerzo, prolongar la vida útil de estas estructuras, en la Universidad de Aveiro un grupo de investigadores viene desarrollando un trabajo multidisciplinar sobre las construcciones de adobe en Portugal. El objetivo principal del mismo se centra en la creación de una base de resultados experimentales que apoye las intervenciones de rehabilitación y/o refuerzo del patrimonio edificado, y el desarrollo de soluciones de mejora de su comportamiento estructural. Esta investigación se constituye como un guía que procura contribuir al conocimiento de estas fábricas, enfocado sobre todo a la rehabilitación de las mismas, aportando información que permita a los diferentes profesionales que trabajan en este ámbito actuar en la conservación de este patrimonio.
Self-construction of a solar water heater; Calentador solar de agua de auto-construccion
Energy Technology Data Exchange (ETDEWEB)
Lentz Herrera, Alvaro E.; Rincon Mejia, Eduardo A. [Universidad Autonoma de la Ciudad de Mexico, Mexico, D.F. (Mexico)
2009-07-01
In this work a flat receiver of self construction is shown with relatively low cost and easy manufacture, but with a thermal efficiency superior to 40% for applications at temperatures less than 60 degrees Celsius, that allows satisfying international standards in this respect. The heater has been matter of study in open courses distributed in the Universidad Autonoma de la Ciudad de Mexico (UACM) oriented to that the participants construct their own system, in addition to its installation and tests. The obtained results have been excellent. The massive use of efficient solar receivers of self-construction can truly help to the decreasing of the gas discharges of greenhouse effect. [Spanish] En este trabajo se presenta un captador plano de auto construccion con relativamente bajo costo y facil manufactura, pero con un rendimiento termico superior a 40% para aplicaciones a temperatura menos de 60 grados centigrados que le permite satisfacer estandares internacionales a este respecto. El calentador ha sido materia de estudio en cursos abiertos impartidos en la Universidad Autonoma de la Ciudad de Mexico (UACM) orientados a que los participantes construyan su propio sistema, ademas de su instalacion y pruebas. Los resultados obtenidos han sido excelentes. El uso masivo de captadores solares eficientes de autoconstruccion puede en verdad coadyuvar a la disminucion de las emisiones de gases de efecto invernadero.
Corrales-Ruiz, Christian
2015-01-01
Proyecto de Graduación (Maestría en Gerencia de Proyectos) Instituto Tecnológico de Costa Rica, Área Académica de Gerencia de Proyectos Maestría en Gerencia de Proyectos, 2015. Estructuras y Construcciones Yeril S.A., is a Costa Rican company founded in 1986 and is a privately owned family business with over 15 years of experience in the market of manufacture and construction of steel structures. Because of its growth, the company has suffered methodological shortcomings in planning, mo...
Technological advances in zero energy buildings; Avances tecnologicos en edificios de energia cero
Energy Technology Data Exchange (ETDEWEB)
Gonzalez Milla, Guillermo; Perez Rebolledo, Hugo; Acoltzi Acoltzi, Higinio [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)
2011-07-01
Buildings use a large amount of energy to operate and are one of the main sources of contaminating emissions. A building is a complex system and all of their components contribute to the total energy demand. The technology to construct zero-energy buildings is already available, but obstacles exist such as the lack of information and technical training of architects and engineers to design highly energy efficient buildings. The present article describes the progress to-date and the future prospects for the design and construction of zero-energy buildings, as well as the problems involved in its implementation. [Spanish] Los edificios usan una gran cantidad de energia para operar y son una de las principales fuentes de emisiones contaminantes. Un edificio es un sistema complejo y todos sus componentes contribuyen a la demanda total de energia. La tecnologia para construir edificios de energia cero ya esta disponible, pero existen barreras como falta de informacion o capacitacion tecnica a arquitectos e ingenieros, para disenar edificios de alta eficiencia energetica. El presente articulo muestra los avances a la fecha y la prospectiva para el diseno y construccion de edificios de energia cero, asi como la problematica para su implementacion.
Energy Technology Data Exchange (ETDEWEB)
Pardo-Gomez, Rafael [Centro de Investigaciones Hidraulicas (Cuba)
2008-04-15
Ski-jump energy dissipators are widely used in hydraulic engineering because of their well-known effectiveness. Nevertheless, some uncertainty exits associated with the dimensions of the scour hole appearing downstream of the structure. This paper presents a new method for solving this problem. This method includes spillway stability checking as part of the design process and also stability checking of any other construction near the energy dissipation zone. [Spanish] Los disipadores de energia tipo trampolin tienen amplia utilizacion en la practica de la ingenieria hidraulica por su probada eficacia; sin embargo, su diseno esta sujeto a cierto grado de incertidumbre en cuanto a la prediccion de las dimensiones del cono de socavacion que habra de producirse aguas abajo de la estructura. En el presente trabajo se muestra un metodo novedoso, mediante el cual el autor soluciona el aspecto antes referido, toda vez que se incluye como parte del proceso de diseno la comprobacion de la estabilidad del propio aliviadero o de cualquier otra obra cercana a la zona de disipacion de energia.
Energy Technology Data Exchange (ETDEWEB)
Diego Marin, Antonio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1988-12-31
In this article the importance of soot blowers in the subject of design, operation and maintenance are described and the effects that its inefficient functioning causes in the steam generators. The activities and the results of a project for the evaluation of the functioning of the soot blowers in the Comision Federal de Electricidad (CFE) boilers. Finally, the scope of a new project oriented towards the retractable soot blowers efficiency optimization, and to the creation of the infra-structure to substitute the import of its components. [Espanol] En este articulo se describe la importancia de los sopladores de hollin en los aspectos de diseno, operacion y mantenimiento, y los efectos que su funcionamiento deficiente produce en los generadores de vapor. Se presentan tambien las actividades y los resultados de un proyecto para evaluar el funcionamiento de los deshollinadores de las calderas de la Comision Federal de Electricidad (CFE). Finalmente, se presenta el alcance de un nuevo proyecto que se orienta a optimar la eficiencia de los sopladores de hollin retractiles y a crear la infraestructura para sustituir las importaciones de sus componentes.
Energy Technology Data Exchange (ETDEWEB)
Diego Marin, Antonio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1987-12-31
In this article the importance of soot blowers in the subject of design, operation and maintenance are described and the effects that its inefficient functioning causes in the steam generators. The activities and the results of a project for the evaluation of the functioning of the soot blowers in the Comision Federal de Electricidad (CFE) boilers. Finally, the scope of a new project oriented towards the retractable soot blowers efficiency optimization, and to the creation of the infra-structure to substitute the import of its components. [Espanol] En este articulo se describe la importancia de los sopladores de hollin en los aspectos de diseno, operacion y mantenimiento, y los efectos que su funcionamiento deficiente produce en los generadores de vapor. Se presentan tambien las actividades y los resultados de un proyecto para evaluar el funcionamiento de los deshollinadores de las calderas de la Comision Federal de Electricidad (CFE). Finalmente, se presenta el alcance de un nuevo proyecto que se orienta a optimar la eficiencia de los sopladores de hollin retractiles y a crear la infraestructura para sustituir las importaciones de sus componentes.
Energy Technology Data Exchange (ETDEWEB)
Pastorini, A; Belinco, C [Comision Nacional de Energia Atomica, San Martin (Argentina). Centro Atomico Constituyentes
1998-12-31
During the design steps of a fuel bundle for a nuclear reactor, some vibration tests are usually necessary to verify the prototype dynamical response characteristics and the structural integrity. To perform these tests, the known hydrodynamic loop facilities are used to evaluate the vibrational response of the bundle under the different flow conditions that may appear in the reactor. This paper describes the tests performed on a 19 plate fuel bundle prototype designed for a low power research reactor. The tests were done in order to know the dynamical characteristics of the plates and also of the whole bundle under different flow rate conditions. The paper includes a description of the test facilities and the results obtained during the dynamical characterization tests and some preliminary comments about the tests under flowing water are also presented. (author) 4 refs., 12 figs., 4 tabs. [Espanol] Durante el diseno de un elemento combustible para un reactor nuclear se requiere de la realizacion de ensayos con el objeto de verificar el comportamiento de ese diseno y permitir, de ser necesario, la introduccion de modificaciones al mismo. Para verificar las caracteristicas de respuesta dinamica e integridad estructural, se realizan ensayos de vibraciones que incluyen someter al prototipo a condiciones de circulacion del fluido similares a las que soportara durante la operacion del reactor. Estos ensayos se realizan en facilidades de ensayos conocidas como circuitos hidrodinamicos, que permiten no solo someter el prototipo al flujo de fluido, sino tambien obtener una adecuada caracterizacion de la respuesta del mismo a traves del luso de sensores de distinto tipo. En este trabajo se describen los ensayos realizados sobre un prototipo de elemento combustible de 19 placas destinado a un reactor de investigacion multiproposito de baja potencia. Los ensayos tuvieron como objetivo conocer la respuesta dinamica de las placas individuales y del elemento combustible en su
Energy Technology Data Exchange (ETDEWEB)
Lopez Luiz, Norberto; Rodriguez Bautista, Jose; Verduzco Figueroa, Hilario; Gudino Lau, Jorge; Galindo Granados, Miguel angel [Universidad de Colima, Facultad de Ingenieria Electromecanica, Manzanillo, Colima (Mexico)]. E-mail: norberto_lopez@ucol.mx
2010-11-15
The aim of this paper is to present the design of a hydraulic microturbine (MTH), which may be installed in areas where supplies are not available for electric power transmission lines, but possessing hydroelectric. MTH's role is to convert hydraulic energy into mechanical work, is coupled to an electric generator, whose function is to convert the mechanical energy into electrical energy. The turbine generator set will produce more electric power the greater the hydroelectric of the area. In southern Mexico, we have great hydroelectric potential, as the case of the states of Veracruz, Chiapas and Oaxaca, which have small causes of rivers where the MTH could be installed and put into operation. [Spanish] El objetivo de este articulo es presentar el diseno de una microturbina hidraulica (MTH), la cual podra ser instalada en zonas donde no se cuente con suministro de energia electrica por medio de lineas de transmision, pero que posean aprovechamientos hidroelectricos. La funcion de la MTH es convertir la energia hidraulica en trabajo mecanico, estara acoplada a un generador electrico, cuya funcion es convertir dicha energia mecanica en energia electrica. El conjunto turbina generador producira mas potencia electrica mientras mayor sea el aprovechamiento hidroelectrico de la zona. En el sur de Mexico contamos con un gran potencial hidroelectrico, como el caso de los estados de Veracruz, Chiapas y Oaxaca, que cuentan con pequenos causes de rios donde las MTH podrian ser instaladas y puestas en operacion.
Energy Technology Data Exchange (ETDEWEB)
Gonzalez, Carlos A; Chanson, Hubert [Universidad de Queensland (Australia)
2007-04-15
Stepped chutes have been used as hydraulic structures since antiquity. They can be found acting as spillways and fish ladders in dams and weirs, as energy dissipators in artificial channels, gutters and rivers, and as aeration enhancers in water treatment plants and polluted streams. In recent years, new construction techniques and materials (Roller Compacted Concrete RCC, rip-rap gabions, etc.) together with the development of the above-mentioned new applications have allowed cheaper construction methods, increasing the interest in stepped chute design. During the last three decades, research in stepped spillways has been very active. However, studies prior to 1993 neglected the effect of free-surface aeration. A number of studies have focused since then on steep stepped chutes ({theta} {approx} 45 degrees), but the hydraulic performance of moderate-slope stepped channels is not yet totally understood. This study details an experimental investigation of physical air-water flow properties down moderate-slope stepped spillways conducted in two laboratory models: the first model was a 3.15-m-long stepped chute with a 15.9 degrees slope comprising two interchangeable step heights (h = 0.1 m and h = 0.05 m); the second model was a 3.3 m long, stepped channel with a 21.8 degrees slope (h = 0.1 m). A broad range of discharges within transition and skimming flow regimes was investigated. Measurements were conducted using a double tip conductivity probe. The study provides new, original insights into air-water stepped chute flows not foreseen in prior studies and presents a new design criterion for chutes with moderate slopes based on the experimental results. [Spanish] Durante las ultimas tres decadas, el interes y diversidad en el uso de canales escalonados han aumentado debido al desarrollo de nuevas tecnicas y materiales que permiten su construccion de manera rapida y economica (concreto compactado con rodillo CCR, gaviones, etcetera). Actualmente, los canales
Energy Technology Data Exchange (ETDEWEB)
Roldan, P.; Melendro, J.; Gomez, A.; Hermana, I.
2011-07-01
It there is anything that distinguished Iberdrola Ingeneria y Construccion, as part of the Iberdrola Group, it is its firm commitment to innovation and continuous improvement. This is the philosophy that led the company to its interest in three-dimensional design tools back when they were in an early stage of development : very little international implementation, lack of integration with other applications, absence of previous experiences to understand the best possible configuration for each case, etc. Nevertheless, the company was able to see the tremendous advantage of having a construction program in the early months of a project- a detailed program that could predict, and therefore avoid, the problems that, if not anticipated, would arise in the construction phase when they result in higher costs, longer time frames and a multitude of complications. This is precisely what 3D design tools offer prediction and this has been proven in the latest combined cycle projects executed with these tools. A project executed without errors not only decreases cost and time overruns, but also necessarily increases the quality of the end result. Efficiency and quality: these are both basic goals of Iberdrola Ingenieria y Construccion. The knowledge of and skill in the use of these tools have grown at the same time that their development has reached increasingly higher levels. As a result, Iberdrola Ingenieria y Conctruccion now has intensive experience in the use of 3D design tools and is preprared for the future challenges posed by these tools, the capabilities of which have attained such heights that it is possible to take on one of the most technically challenging projects that exists a nuclear power plant. And we are ready. (Author)
Energy Technology Data Exchange (ETDEWEB)
Chavez B, A; Balcazar G, M
1991-10-15
To carry out studies on the radon behavior under controlled and stable conditions it was designed and constructed a system that consists of two parts: a container of mineral rich in Uranium and an experimentation chamber with radon united one to the other one by a step valve. The container of uranium mineral approximately contains 800 gr of uranium with a law of 0.28%; the radon gas emanated by the mineral is contained tightly by the container. When the valve opens up the radon gas it spreads to the radon experimental chamber; this contains 3 accesses that allow to install different types of detectors. The versatility of the system is exemplified with two experiments: 1. With the radon experimental chamber and an associated spectroscopic system, the radon and two of its decay products are identified. 2. The design of the system allows to couple the mineral container to other experimental geometries to demonstrate this fact it was coupled and proved a new automatic exchanger system of passive detectors of radon. The results of the new automatic exchanger system when it leave to flow the radon freely among the container and the automatic exchanger through a plastic membrane of 15 m. are shown. (Author)
Energy Technology Data Exchange (ETDEWEB)
Ramadier, R. C.; Parker, E. [Communaute Europoenne de l' Energie Atomique, Bruxelles (Belgium)
1963-10-15
annees de leur utilisation. Cette participation de l'Euratom a eu pour effet d'encourager la construction de certaines de ces centrales nucleaires. Elle a permis en outre et permettra encore d'acquerir des informations extremement utiles au cours des annees qui viennent, annees au cours desquelles les problemes de fonctionnement se poseront d'une facon decisive pour le developpement de l'energie atomique. (author) [Spanish] Para fomentar e l desarrollo de una industria nuclear europea, la Comision de la EURATOM utiliza, entre otros medios, su programa de ''participacion mancomunada'', que le permite cooperar con aportaciones de 32 millones de unidades de cuenta AME como maximo, en la construccion y explotacion de reactores de potencia. Como contrapartida, obtiene informaciones sobre el diseno, la construccion, la puesta en marcha y el funcionamiento de esos reactores. Hasta hoy la Comision ha firmado contratos con tres empresas: a) la Societa Elettronucleare Nazionale (SENN), que hace construir en Italia una central de 150 MW(e) netos equipada con un reactor de agua hirviente de ciclo doble; b) la Societa Italiana Meridionale Energia Atomica (SIMEA), que ha emprendido en Italia la construccion de una central de 200 MW(e) netos equipada con un reactor de uranio natural-grafito-anhidrido carbonico; c) la Societe d'Energie Nucleaire Franco-Belge des Ardennes (SENA), que ha emprendido en la frontera franco-belga la construccion de una central equipada con un reactor de agua a presion que podra alcanzar - y probablemente superar - una potencia neta de 242 MW(e). La Comision ha recibido, ademas, una solicitud del grupo Rheinisch-Westfalisches Elektrizitetswerk- Bayernwerke (RWE-BW) y otra de la N.V. Samenwerkende Electriciteits-Productiebedrijven para participar en la construccion y explotacion de otros dos reactores de potencia: la primera se refiere a un reactor de 237 MW(e) de agua hirviente y de ciclo doble, y la segunda a un reactor de 50 MW(e) de agua hirviente, de ciclo
Energy Technology Data Exchange (ETDEWEB)
Vazquez Fernandez, E; Lopez Telles, P [Instituto de ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)
2003-04-15
In this article are shown the graphics for the best design of dropping irrigation systems of low head with 17 mm of external diameter hose and O-Tiff type insertion dropper of low outlay. The design consists in getting the minimum number of laterals once the space between these and the droppers is established. The graphics were obtained by using a model for open networks of pipes adjusted with the information for top lengths of the dropping lateral included on the manufacture's technical sheet with an 0.90 emission uniformity for flat ground conditions. The systems can be fixed or mobile (from 0.5 to 3.2 m between laterals) to irrigate orchards or farmings with its plants separated from 0.3 to 0.8 m with an average expenditure of 1.39 L/hr for black droppers. The load on the feed-tank (or bolster) is of 1.5 m. The irrigation areas may fluctuate between 750 up to 6 780 m{sup 2} and the costs from 1.1 to 13 pesos per m{sup 2}. [Spanish] Se presentan graficas para el diseno optimo de sistemas de riego por goteo de baja carga con mangueras de 17 mm de diametro externo y goteros de insercion tipo laberinto O-Tif de goteo pequeno. El diseno consiste en obtener el numero optimo de laterales una vez establecidas las separaciones entre estos y los emisores. Las graficas se obtuvieron con ayuda de un modelo matematico para redes abiertas de tuberias que fue calibrado a partir de la informacion de longitudes maximas del lateral de goteo incluida en la hoja tecnica del fabricante, con uniformidad de emision de 0.90 en terreno plano. Los sistemas pueden ser fijos o moviles para el riego de hortalizas o cultivos con separaciones entre plantas de 0.3 a 0.8 m y de 0.5 a 3.2 m entre laterales, con gastos promedio de 1.391/h para goteros de color negro. La carga en el tanque de alimentacion o cabezales de 1.5 m. Las areas de riego van desde 750 hasta 6780 m{sup 2} y los costos unitarios de 1.1 a 1.3 pesos por m{sup 2}.
Energy Technology Data Exchange (ETDEWEB)
Dalla Volta, F. [Comitato Nazionale per l' Energia Nucleare, Rome (Italy)
1963-10-15
incessamment entrer en service en Italie, aideraient a etablir les plans des installations futures. Il suggere la possibilite de prevoir des maintenant des cycles de combustible pour une plus longue periode. (author) [Spanish] En la memoria se examinan las principales consideraciones de caracter tecnico y eco nomico relativas al diseno, construccion y explotacion de las primeras centrales nucleoelectricas a plena escala, y que mas pueden ayudar a preparar los planes futuros de expansion nuclear, con especial referencia a las condiciones que reinan en Italia. El estado actual de la tecnologia de los reactores y su evolucion continua en la ejecucion de los proyectos hasta ahora realizados, muestra una neta tendencia hacia la reduccion de los costos del ciclo de combustible y de los elementos componentes de las centrales. Contribuye a esta evolucion la tendencia cada vez mas acusada a construir centrales de mayores dimensiones, y el hecho de que las previsiones acerca de las condiciones futuras de la red electrica sugieren la conveniencia de instalar centrales nucleares de mayor capacidad que las centrales clasicas, en razon de la disminucion que experimentaran los gastos de produccion gracias a la puesta en servicio de esas nuevas unidades. En lo que se refiere a la experiencia adquirida en e l diseno, construccion y pruebas de las centrales en funcionamiento, la memoria estudia los principales factores que han de tenerse en cuenta en la preparacion de planes para el futuro, tambien desde e l punto de vista de los programas de construccion y de pruebas. El autor insiste en el problema del confinamiento, en razon de la favorable influencia que sobre la elecion del emplazamiento de las centrales puede ejercer el perfeccionamiento de blindajes muy seguros, que podrian construirse sin aumento sensible del costo, teniendo en cuenta la especial situacion de Italia en lo que se refiere a ciertos aspectos del problema. En cuanto a la experiencia adquirida en la explotacion de centrales
Jaramillo Figueroa, Pablo Vinicio
2015-01-01
El trabajo de titulación trata sobre un proyecto práctico de aplicación de la tecnología de Realidad Aumentada – RA para la enseñanza de la asignatura de Construcciones , haciendo un análisis de los tipos de TIC aplicadas a la educación, su masificación en los procesos de enseñanza aprendizaje desde el proyector y la diapositiva, pasando por las multiplataformas, hasta proponer la integración de la RA en el aprendizaje de la carrera de arquitectura. Desde la irrupción de las Tecnologías de...
Energy Technology Data Exchange (ETDEWEB)
Espejel Valdez, Eduardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Millan Monje, Alejandro; Honk Hernandez, Wenceslao [Comision Federal de Electricidad, (CFE), Mexico, D. F. (Mexico)
1986-12-31
A group of specialists from the Comision Federal de Electricidad (CFE) and of the Instituto de Investigaciones Electricas (IIE) analyzes the design of various types of power transmission towers in their application stage, in order to enhance them. In this article the structural characteristics of the self-supported tower type 2M2 for 230 kV of two circuits and of suspension, are presented. [Espanol] Un grupo de especialistas de la Comision Federal de Electricidad (CFE) y del Instituto de Investigaciones Electricas (IIE) analiza el diseno de diversos tipos de torres de transmision en su etapa de aplicacion, con el fin de mejorarlos. En este articulo se presentan las caracteristicas estructurales de la torre autosoportada tipo 2M2 para 230 kV, de dos circuitos y de suspension.
Energy Technology Data Exchange (ETDEWEB)
Espejel Valdez, Eduardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Millan Monje, Alejandro; Honk Hernandez, Wenceslao [Comision Federal de Electricidad, (CFE), Mexico, D. F. (Mexico)
1985-12-31
A group of specialists from the Comision Federal de Electricidad (CFE) and of the Instituto de Investigaciones Electricas (IIE) analyzes the design of various types of power transmission towers in their application stage, in order to enhance them. In this article the structural characteristics of the self-supported tower type 2M2 for 230 kV of two circuits and of suspension, are presented. [Espanol] Un grupo de especialistas de la Comision Federal de Electricidad (CFE) y del Instituto de Investigaciones Electricas (IIE) analiza el diseno de diversos tipos de torres de transmision en su etapa de aplicacion, con el fin de mejorarlos. En este articulo se presentan las caracteristicas estructurales de la torre autosoportada tipo 2M2 para 230 kV, de dos circuitos y de suspension.
Energy Technology Data Exchange (ETDEWEB)
Perez, R; Germanier, A; Rubio, M [CEPROCOR, Cordoba (Argentina); Sbarato, D; Zappino, R [Observatorio Ambiental de la Municipalidad de Cordoba, Cordoba (Argentina)
1998-07-01
de radon 222. El principal aporte se encontro en los muros de las habitaciones lo que indica que los materiales de construccion locales representan una importante fuente de radon 222. Dentro de los materiales de construccion empleados en estos edificios se encuentan principalmente rocas graniticas y en menor medida cal, arena y marmol. Las concentraciones de radon 222 registradas en algunas habitaciones analizadas estan alrededor de 158 Bq/m{sup 3}. El estudio de los efectos de la ventilacion en la concentracion de radon 222 permiten concluir que sus valores disminuyen mediante una ventilacion natural eficiente de las habitaciones. (autor)
El valor del trabajo en las construcciones identitarias de un grupo de asalariados jóvenes
Directory of Open Access Journals (Sweden)
Ariel Wilkis
2005-12-01
Full Text Available Este artículo es el resultado de una investigación realizada en la empresa Toyota de Argentina, la cual desarrolla formas organizacionales y de gestión de la mano de obra de acuerdo a las particularidades del modelo japonés. En función de las premisas impuestas por dicho modelo, la contratación se orienta preferentemente hacia trabajadores jóvenes que hayan finalizado sus estudios secundarios. Los interrogantes que nos planteamos giran en torno al modo en que, en esta experiencia particular, determinadas trayectorias individuales, ciertos valores especiales y propios del sistema toyotista se relacionan con construcciones identitarias de trabajadores jóvenes, insertados en forma estable en un grupo de trabajo. Hemos llevado a cabo el trabajo de investigación, del cual surgió este artículo, a partir de una metodología eminentemente cualitativa. Dentro de esta última, las principales herramientas utilizadas fueron las entrevistas en profundidad y las historias de vida.This article is the result of a research carried out at Toyota Argentina, which develops management organization forms of workforce according to the Japanese model. In this sense, and following the outlines of this model, the enterprise hires preferably young men, who have finished high school. Taking this into consideration we wonder how specific individual trajectories and certain values that distinguish the toyotist model are related to identity constructions of the young workers in this particular experience. In order to accomplish this research we have make use of a qualitative approach, applying particularly interviews and Life histories.
Energy Technology Data Exchange (ETDEWEB)
Lopez P, J. Manuel A; Morrillon G, David; Rodriguez V, Luis [Instituto de Ingenieria de la UNAM, Mexico, D.F. (Mexico)
2000-07-01
This article is about two important scopes of the Bioclimatical Design (BD), the Social scope and the environmental scope. As an introduction, it is justified the importance of this topic through the association of the BD in the context of sustainability with our country's economic model. The analysis is done under the perspective of effects of the BD on social and environmental scopes. In social scope is used the Cost and Benefit Analysis according to social evaluation. In environmental scope, effects in water, air and ground are studied, but the measurement is done according to the emissions reduction of CO{sub 2} on atmosphere because of the earn on energy consumption. The results of the measurement of this effects are related with economical costs and benefits, which may show a general view about economical, social and environmental scopes. As conclusions, interest results are show and this is proposed to incorporate them in the economical politics. [Spanish] En este articulo se tocan dos aspectos importantes del Diseno Bioclimatico (DB), el Impacto Social y el Impacto Ambiental. En la introduccion se justifica la importancia del tema, asociando el DB en el contexto de la sustentabilidad, con el modelo economico que se ha imperado en nuestro pais. El estudio se realiza bajo la perspectiva de los impactos que el DB tiene en el aspecto social y en el ambiental. En lo social, se recurre a la metodologia del Analisis Costo-Beneficio para evaluacion Social, en lo ambiental, aunque se tocan los puntos de impacto en aire, agua y uso de suelo, la medicion del impacto se realiza con base en la disminucion de emisiones de CO{sub 2} a la atmosfera por el ahorro en el consumo de energia electrica. Los resultados de la medicion de impactos se cruzan con los costos y beneficios economicos, para presentar un panorama completo en cuanto a aspectos economicos, sociales y ambientales. En las conclusiones se rescatan los resultados de interes y se proponen las inserciones de
Energy Technology Data Exchange (ETDEWEB)
Buerba, Carmen; Tellez, Carolina; Perez Muzquiz, Erika; Perez Acuna, Claudia Jimena; Gomez Pamatz, Pilar; Lopez Leon, Javier; Magdaleno, Rafael; Bolanos, Victor Hugo; Alfaro Quintero, Estefania; Hernandez, Ivan [Universidad Michoacana, Facultad de Arquitectura (Mexico)
2009-07-01
In Mexico does not exist guides of bio-climatic design whose reading and interpretation be so simple that any architect or professional of the construction without experience in the bio-climatic area, can use when designing or remaking suitable a construction. A group formed by ten professors (project coauthors) of the Faculty of Architecture of the Universidad Michoacana have undertaken the task of making tables, with profuse graphical material, for each one of the main sub climates of our country, with respect to their economic and urban importance. The selection of the sub climates was done taking into account that they are those that are present in the capital cities and other cities of high urban importance. Basically each one of the tables contains: description of the sub climate and its location by climatic region, relevant physical-geographic aspects, excellent climatic conditions, strategically bio-climatic to use, proposed strategies of design from the solar and Aeolian axes (direction and location of spaces and openings, materials and constructive systems, solar and Aeolian control system). The present work is part of a book on bio-climatic design for architecture in Mexico of proximate publication, that will contain, divided according to the 10 proposed climatic regions by the Instituto de Geografia of the UNAM, folders with the sub climates that are presented in each one of the 10 climatic regions, and in each of them, tables with the different selected cities. [Spanish] En Mexico no existen guias de diseno bioclimatico cuya lectura e interpretacion sea tan sencilla que cualquier arquitecto o profesionista de la construccion sin experiencia en el area bioclimatica, puede utilizar al disenar o readecuar una edificacion. Un grupo formado por diez profesores (coautores del proyecto) de la Facultad de Arquitectura de la Universidad Michoacana nos hemos dado a la tarea de hacer unas tablas, con profuso material grafico, para cada uno de los principales
Energy Technology Data Exchange (ETDEWEB)
Guillen S, Omar; Mejia N, Fortino [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)
2005-07-01
In order to facilitate and to simplify the development and analysis of a Hybrid System in reference to its design, construction, operation and maintenance, it turns out optimal to carry out the simulation of this one by means of software, with which a significant reduction in the investment costs is obtained. Given the mix of technology of electrical generation which is involved in a hybrid system, it is very important to have a tool integrated with specialized packages of calculation (software), that allow to carry out the simulation tasks of the operational functioning of these systems. Combined with the former, one must not fail to consider the operation characteristics, the facilities of the user, the clarity in the obtained results and the possibility of its validation with respect to prototypes orchestrated in field. Equally, it is necessary to consider the identification of tasks involved in relation to the place of installation of this electrification technology. At the moment, the hybrid systems technology still is in a stage of development in the international level, and exist important limitations as far as the methodology availability and engineering tools for the optimum design of these systems. With the development of this paper, it is intended to contribute to the advance of the technology and to count on own tools to solve the described series of problems. In this article are described the activities that more impact have in the design and development of hybrid systems, as well as the identification of variables, basic characteristics and form of validation of tools in the integration of a methodology for the simulation of these systems, facilitating their design and development. [Spanish] Para facilitar y simplificar el desarrollo y analisis de un Sistema Hibrido en lo que refiere a su diseno, construccion, operacion y mantenimiento, resulta optimo efectuar la simulacion de este por medio de un software, con lo que se obtiene una reduccien
Energy Technology Data Exchange (ETDEWEB)
Ayala Carcedo, F J; Ortiz, D U.F.P.; Lopez, J C; Rodriguez Ortiz, J M; Kraemer, H C; Val, M M.A.D.
1986-01-01
The publication gives some easy guide-lines for the design and execution of surface mine roads, and their auxiliary elements, within the technical possibilities and equipment normally available in mining operations. A methodology for the mining haulage is proposed, taking into consideration the geometric and functional conditions of the surface mine haulage road and the vehicles used. 25 refs., 58 figs., 31 tabs., 10 photos.
Energy Technology Data Exchange (ETDEWEB)
De Alba Rosano, Mauricio [CIE, UNAM, Temixco, Morelos (Mexico)
2000-07-01
A new computational program has been developed in order to design single stage compression heat pumps. This software, named CICLO 1.0 allows the design of water-water, water-air, air-water and air-air heat pumps, for industrial and residential applications. CICLO 1.0 simulates three types of compressors: reciprocating, screw and scroll. Also has a data base created with REFPROP software which includes eleven refrigerants. The condenser and evaporator simulation includes global conductance (UA) determination, and when one or both are shell and tube's type, this software shows the even number of tube passes by shell. The software determines the best compressor and refrigerant setup taking the COP as a parameter; in order to obtain this, is necessary to know the inlet/outlet conditions of the fluid to be heated, the inlet conditions of the fluid that gives heat, and the electric motor efficiency that drives the compressor. The afforded results by CICLO 1.0 are: operation conditions from compression cycle, that means, pressures and temperatures at the inlet/outlet from every heat pump component are determined: as well as refrigerant mass flux, COP, power required by compressor, volumetric and isentropic efficiencies, heat exchangers global conductance and more data. CICLO 1.0 has been executed with heat pump data that nowadays are operating, and the results from the simulation have been very similar each other with data reported from operational facilities. [Spanish] Se ha desarrollado un nuevo programa computacional para el diseno de bombas de calor por compresion de vapor de una sola etapa. Este programa, CICLO 1.0, permite el diseno de bombas de calor de tipo: agua-agua, agua-aire, aire-agua y aire-aire, que se utilicen para aplicaciones industriales, de servicios y residenciales. CICLO 1.0 simula tres tipos de compresores: reciprocante, de tornillo y scroll: cuenta con una base de datos de refrigerantes creada con el programa REFPROP la cual incluye once
Thermal conductivity of molten metals
Energy Technology Data Exchange (ETDEWEB)
Peralta-Martinez, Maria Vita
2000-02-01
were carried out for liquid mercury, gallium, indium and tin in a range of temperature from 300 to 750 K, at atmospheric pressure. In each case the results are compared with predictions using the Wiedemann and Franz law which, although it is based on the solid state metals, it is still the only available theoretical approach for the thermal conductivity of metals in molten state. The new measurements reported for these metals are of demonstrably higher accuracy than any literature published. [Spanish] Ha sido disenado, construido y puesto en servicio un nuevo instrumento para la medicion de la conductividad termica de metales fundidos. El aparato esta basado en la tecnica transiente del alambre caliente y se propone para operacion en un amplio rango de temperaturas, desde la temperatura ambiente hasta los 1200 K, con una precision cercana a {+-} 2%. En su forma presente el instrumento opera hasta los 750 K. La construccion del aparato involucro cuatro diferentes etapas, primero, el diseno y construccion del sensor y segundo, la construccion de un sistema electronico para la medicion y almacenamiento de datos. La tercera etapa fue el diseno e instrumentacion del horno de alta temperatura para la fusion y control de la temperatura de la muestra, y finalmente, se desarrollo un algoritmo para la extraccion de la conductividad termica de los datos crudos de las mediciones. El sensor consiste de un alambre de platino cilindrico emparedado simetricamente entre dos hojas planas rectangulares de alumina. El sensor rectangular se sumerge en el metal fundido de interes y se aplica un paso de voltaje a los extremos del alambre de platino para inducir la disipacion de calor y una consecuente elevacion de temperatura, la que es, en parte, determinada por la conductividad termica del metal fundido. El proceso se describe por un conjunto de ecuaciones diferenciales parciales y apropiadas condiciones de frontera, mas que una solucion analitica aproximada. Se diseno y construyo una
Directory of Open Access Journals (Sweden)
Noèlia Sánchez Candela
2013-02-01
Full Text Available El propòsit d’aquest article és presentar una aproximació a les construccions clivellades i pseudoclivellades del català. Aquestes estructures estan presents no només en el conjunt de les llengües romàniques, on han rebut una atenció especial per part de lingüistes i gramàtics, sinó també en diverses llengües del món tipològicament molt diferents; però sempre presenten propietats formals i funcionals que, en bona mesura, se superposen. Malgrat la productivitat de les construccions de clivellament en la nostra llengua, no comptem amb cap estudi monogràfic i exhaustiu que done compte de les propietats pragmàtiques, semàntiques, sintàctiques o prosòdiques d’aquestes estructures; tot el que trobem en català són referències puntuals (que poden ser més o menys extenses en treballs que abasten altres àmbits d’estudi i que, per tant, tenen altres objectius. Per aquest motiu, l’article pretén ser un primeracostament a aquestes estructures: Hi descriuré breument les propietats pragmàtiques i semàntiques de les construccions de clivellament, així com les principals característiques sintàctiques; hi presentaré la meua proposta de denominació i classificació, defensant la necessitat de diferenciar clarament entre clivellades, d’una banda, i pseudoclivellades de l’altra i, finalment, esbossaré a grans trets una proposta d’anàlisi teòrica.The aim of this paper is to provide an approach to cleft and pseudocleft sentences in Catalan. These structures are present not only in Romance and Germanic languages (where they have received special attention by linguists but also in several world languages that are typologically very different; however, they always present formal and functional properties which largely overlap. Despite the productivity of clefts and pseudoclefts in Catalan, we have no comprehensive case study that gives an account of their pragmatic, semantic, syntactic or prosodic properties; we only
International Nuclear Information System (INIS)
Bingham, R.; Angelis, U. de; Johnston, T.W.
1991-01-01
Recently attention has focused on charged particle acceleration in a plasma by a fast, large amplitude, longitudinal electron plasma wave. The plasma beat wave and plasma wakefield accelerators are two efficient ways of producing ultra-high accelerating gradients. Starting with the plasma beat wave accelerator (PBWA) and laser wakefield accelerator (LWFA) schemes and the plasma wakefield accelerator (PWFA) steady progress has been made in theory, simulations and experiments. Computations are presented for the study of LWFA. (author)
Directory of Open Access Journals (Sweden)
Rego Sanmartín, Teresa
2000-08-01
Full Text Available Traditional rural buildings reflect the building techniques inherited from ancestors, where materials mastery is proved. In this job we analyse the structure of one of the most relevant Spanish traditional agrarian building: the "casa de corral"(yard house. Thirty seven "corrales" (yards of the vernacular earthen construction in the "Páramo de León"(León, Spain were analysed. It was necessary think up an analysis method, which we called "round analysis method". Generally. radial cross sections of the yard have a main space between two earth walls bearing over stone foundation, which support floor framing, the roof framing, roof sheathing and arabic curved tiles. A gantry is usually built inward the yard, on a stone baseLas construcciones rurales tradicionales suelen reflejar el buen hacer de quienes han heredado las técnicas de sus antepasados, demostrando un dominio admirable de los materiales. En este trabajo nos centramos en el análisis estructural de uno de los edificios más emblemáticos de las construcciones agrarias tradicionales peninsulares: la casa de corral. Se analizaron 37 de estos edificios, uniformemente repartidos por la comarca del Páramo de León (España. pertenecientes a la denominada construcción de barro rural tradicional contemporánea. Para llevar a cabo el estudio fue necesario idear el denominado método giratorio de análisis. en virtud del cual se realizan sucesivos cortes radiales al corral. Esto nos permitió establecer las características constructivas más relevantes de dichos edificios. En general. las secciones radiales del corral suelen contar con un volumen principal de gruesos muros de carga a base de tapial sobre cimiento de piedra. sustentando los forjados y la estructura de cubierta, cuya impermeabilidad se logra mediante teja árabe. dispuesta sobre enlabiado de madera o sobre rama entretejida. Hacia el interior del corral se suele construir el corredor porticado, cuyos soportes transmiten las
First muon acceleration using a radio-frequency accelerator
Directory of Open Access Journals (Sweden)
S. Bae
2018-05-01
Full Text Available Muons have been accelerated by using a radio-frequency accelerator for the first time. Negative muonium atoms (Mu^{-}, which are bound states of positive muons (μ^{+} and two electrons, are generated from μ^{+}’s through the electron capture process in an aluminum degrader. The generated Mu^{-}’s are initially electrostatically accelerated and injected into a radio-frequency quadrupole linac (RFQ. In the RFQ, the Mu^{-}’s are accelerated to 89 keV. The accelerated Mu^{-}’s are identified by momentum measurement and time of flight. This compact muon linac opens the door to various muon accelerator applications including particle physics measurements and the construction of a transmission muon microscope.
Energy Technology Data Exchange (ETDEWEB)
Duran Ramirez, Ricardo [Fideicomiso para el Ahorro de la Energia Electrica (Mexico)
2005-01-15
The Fideicomiso para el Ahorro de la Energia Electrica (FIDE) jointly worked with two hotels in construction modifying the original projects of the lighting system to obtain a suitable selection of lamps and lighting control subsystems that would render a saving of 67.5% and 71.0% with respect to the lighting systems originally considered. The project also financed the investment with recovery periods between 1.6 and 2.6 years. It is presented the equivalence between the characteristics of the different types of feasible lamps. [Spanish] El Fideicomiso para el Ahorro de la Energia Electrica (FIDE) trabajo conjuntamente con dos hoteles en construccion modificando los proyectos originales del sistema de iluminacion para lograr una adecuada seleccion de lamparas y subsistemas de control de iluminacion que redituaron en un ahorro del 67.5 y 71.0 % respecto a los sistemas de iluminacion originalmente considerados, al tiempo que financio la inversion con periodos de recuperacion entre 1.6 y 2.6 anos. Se expone una equivalencia entre las caracteristicas de los distintos tipos de lamparas factibles.
Acceleration Modes and Transitions in Pulsed Plasma Accelerators
Polzin, Kurt A.; Greve, Christine M.
2018-01-01
Pulsed plasma accelerators typically operate by storing energy in a capacitor bank and then discharging this energy through a gas, ionizing and accelerating it through the Lorentz body force. Two plasma accelerator types employing this general scheme have typically been studied: the gas-fed pulsed plasma thruster and the quasi-steady magnetoplasmadynamic (MPD) accelerator. The gas-fed pulsed plasma accelerator is generally represented as a completely transient device discharging in approximately 1-10 microseconds. When the capacitor bank is discharged through the gas, a current sheet forms at the breech of the thruster and propagates forward under a j (current density) by B (magnetic field) body force, entraining propellant it encounters. This process is sometimes referred to as detonation-mode acceleration because the current sheet representation approximates that of a strong shock propagating through the gas. Acceleration of the initial current sheet ceases when either the current sheet reaches the end of the device and is ejected or when the current in the circuit reverses, striking a new current sheet at the breech and depriving the initial sheet of additional acceleration. In the quasi-steady MPD accelerator, the pulse is lengthened to approximately 1 millisecond or longer and maintained at an approximately constant level during discharge. The time over which the transient phenomena experienced during startup typically occur is short relative to the overall discharge time, which is now long enough for the plasma to assume a relatively steady-state configuration. The ionized gas flows through a stationary current channel in a manner that is sometimes referred to as the deflagration-mode of operation. The plasma experiences electromagnetic acceleration as it flows through the current channel towards the exit of the device. A device that had a short pulse length but appeared to operate in a plasma acceleration regime different from the gas-fed pulsed plasma
International Nuclear Information System (INIS)
Anon.
1975-01-01
Because the use of accelerated heavy ions would provide many opportunities for new and important studies in nuclear physics and nuclear chemistry, as well as other disciplines, both the Chemistry and Physics Divisions are supporting the development of a heavy-ion accelerator. The design of greatest current interest includes a tandem accelerator with a terminal voltage of approximately 25 MV injecting into a linear accelerator with rf superconducting resonators. This combined accelerator facility would be capable of accelerating ions of masses ranging over the entire periodic table to an energy corresponding to approximately 10 MeV/nucleon. This approach, as compared to other concepts, has the advantages of lower construction costs, lower operating power, 100 percent duty factor, and high beam quality (good energy resolution, good timing resolution, small beam size, and small beam divergence). The included sections describe the concept of the proposed heavy-ion accelerator, and the development program aiming at: (1) investigation of the individual questions concerning the superconducting accelerating resonators; (2) construction and testing of prototype accelerator systems; and (3) search for economical solutions to engineering problems. (U.S.)
Accelerator Technology: Geodesy and Alignment for Particle Accelerators
Missiaen, D
2013-01-01
This document is part of Subvolume C 'Accelerators and Colliders' of Volume 21 'Elementary Particles' of Landolt-Börnstein - Group I 'Elementary Particles, Nuclei and Atoms'. It contains the the Section '8.9 Geodesy and Alignment for Particle Accelerators' of the Chapter '8 Accelerator Technology' with the content: 8.9 Geodesy and Alignment for Particle Accelerators 8.9.1 Introduction 8.9.2 Reference and Co-ordinate Systems 8.9.3 Definition of the Beam Line on the Accelerator Site 8.9.4 Geodetic Network 8.9.5 Tunnel Preliminary Works 8.9.6 The Alignment References 8.9.7 Alignment of Accelerator Components 8.9.8 Permanent Monitoring and Remote Alignment of Low Beta Quadrupoles 8.9.9 Alignment of Detector Components
2014 CERN Accelerator Schools: Plasma Wake Acceleration
2014-01-01
A specialised school on Plasma Wake Acceleration will be held at CERN, Switzerland from 23-29 November, 2014. This course will be of interest to staff and students in accelerator laboratories, university departments and companies working in or having an interest in the field of new acceleration techniques. Following introductory lectures on plasma and laser physics, the course will cover the different components of a plasma wake accelerator and plasma beam systems. An overview of the experimental studies, diagnostic tools and state of the art wake acceleration facilities, both present and planned, will complement the theoretical part. Topical seminars and a visit of CERN will complete the programme. Further information can be found at: http://cas.web.cern.ch/cas/PlasmaWake2014/CERN-advert.html http://indico.cern.ch/event/285444/
Virtual Accelerator for Accelerator Optics Improvement
Yan Yi Ton; Decker, Franz Josef; Ecklund, Stanley; Irwin, John; Seeman, John; Sullivan, Michael K; Turner, J L; Wienands, Ulrich
2005-01-01
Through determination of all quadrupole strengths and sextupole feed-downs by fitting quantities derivable from precision orbit measurement, one can establish a virtual accelerator that matches the real accelerator optics. These quantities (the phase advances, the Green's functions, and the coupling eigen-plane ellipses tilt angles and axis ratios) are obtained by analyzing turn-by-turn Beam Position Monitor (BPM) data with a model-independent analysis (MIA). Instead of trying to identify magnet errors, a limited number of quadrupoles are chosen for optimized strength adjustment to improve the virtual accelerator optics and then applied to the real accelerator accordingly. These processes have been successfully applied to PEP-II rings for beta beating fixes, phase and working tune adjustments, and linear coupling reduction to improve PEP-II luminosity.
Analyzing radial acceleration with a smartphone acceleration sensor
Vogt, Patrik; Kuhn, Jochen
2013-03-01
This paper continues the sequence of experiments using the acceleration sensor of smartphones (for description of the function and the use of the acceleration sensor, see Ref. 1) within this column, in this case for analyzing the radial acceleration.
Energy Technology Data Exchange (ETDEWEB)
Spentzouris, P.; /Fermilab; Cary, J.; /Tech-X, Boulder; McInnes, L.C.; /Argonne; Mori, W.; /UCLA; Ng, C.; /SLAC; Ng, E.; Ryne, R.; /LBL, Berkeley
2011-11-14
The design and performance optimization of particle accelerators are essential for the success of the DOE scientific program in the next decade. Particle accelerators are very complex systems whose accurate description involves a large number of degrees of freedom and requires the inclusion of many physics processes. Building on the success of the SciDAC-1 Accelerator Science and Technology project, the SciDAC-2 Community Petascale Project for Accelerator Science and Simulation (ComPASS) is developing a comprehensive set of interoperable components for beam dynamics, electromagnetics, electron cooling, and laser/plasma acceleration modelling. ComPASS is providing accelerator scientists the tools required to enable the necessary accelerator simulation paradigm shift from high-fidelity single physics process modeling (covered under SciDAC1) to high-fidelity multiphysics modeling. Our computational frameworks have been used to model the behavior of a large number of accelerators and accelerator R&D experiments, assisting both their design and performance optimization. As parallel computational applications, the ComPASS codes have been shown to make effective use of thousands of processors. ComPASS is in the first year of executing its plan to develop the next-generation HPC accelerator modeling tools. ComPASS aims to develop an integrated simulation environment that will utilize existing and new accelerator physics modules with petascale capabilities, by employing modern computing and solver technologies. The ComPASS vision is to deliver to accelerator scientists a virtual accelerator and virtual prototyping modeling environment, with the necessary multiphysics, multiscale capabilities. The plan for this development includes delivering accelerator modeling applications appropriate for each stage of the ComPASS software evolution. Such applications are already being used to address challenging problems in accelerator design and optimization. The ComPASS organization
International Nuclear Information System (INIS)
Champelovier, Y.; Ferrari, M.; Gardon, A.; Hadinger, G.; Martin, J.; Plantier, A.
1998-01-01
Since the cessation of the operation of hydrogen cluster accelerator in July 1996, four electrostatic accelerators were in operation and used by the peri-nuclear teams working in multidisciplinary collaborations. These are the 4 MV Van de Graaff accelerator, 2,5 MV Van de Graaff accelerator, 400 kV ion implanter as well as the 120 kV isotope separator
International Nuclear Information System (INIS)
Spentzouris, P.; Cary, J.; McInnes, L.C.; Mori, W.; Ng, C.; Ng, E.; Ryne, R.
2008-01-01
The design and performance optimization of particle accelerators are essential for the success of the DOE scientific program in the next decade. Particle accelerators are very complex systems whose accurate description involves a large number of degrees of freedom and requires the inclusion of many physics processes. Building on the success of the SciDAC-1 Accelerator Science and Technology project, the SciDAC-2 Community Petascale Project for Accelerator Science and Simulation (ComPASS) is developing a comprehensive set of interoperable components for beam dynamics, electromagnetics, electron cooling, and laser/plasma acceleration modelling. ComPASS is providing accelerator scientists the tools required to enable the necessary accelerator simulation paradigm shift from high-fidelity single physics process modeling (covered under SciDAC1) to high-fidelity multiphysics modeling. Our computational frameworks have been used to model the behavior of a large number of accelerators and accelerator R and D experiments, assisting both their design and performance optimization. As parallel computational applications, the ComPASS codes have been shown to make effective use of thousands of processors.
Advanced concepts for acceleration
International Nuclear Information System (INIS)
Keefe, D.
1986-07-01
Selected examples of advanced accelerator concepts are reviewed. Such plasma accelerators as plasma beat wave accelerator, plasma wake field accelerator, and plasma grating accelerator are discussed particularly as examples of concepts for accelerating relativistic electrons or positrons. Also covered are the pulsed electron-beam, pulsed laser accelerator, inverse Cherenkov accelerator, inverse free-electron laser, switched radial-line accelerators, and two-beam accelerator. Advanced concepts for ion acceleration discussed include the electron ring accelerator, excitation of waves on intense electron beams, and two-wave combinations
Accelerating tube for the ''EG-1'' electrostatic accelerator
International Nuclear Information System (INIS)
Romanov, V.A.; Ivanov, V.V.; Krupnov, E.P.; Debin, V.K.; Dudkin, N.I.; Volodin, V.I.
1980-01-01
A design of an accelerating tube (AT) for an electrostatic accelerator of the EG-1 type is described. Primary consideration in the development of the AT has been given to increasing the electric strength of accelerating gaps, the vacuum conductivity and better insulator screening from charged particles. After AT vacuum and high-voltage ageing in the accelerator, a hydrogen ions beam of up to 80 μA has been produced. The beam was adequately shaped in the energy range from 1.8 to 5.0 MeV [ru
CAS CERN Accelerator School superconductivity in particle accelerators
International Nuclear Information System (INIS)
Turner, S.
1989-01-01
One of the objectives of the CERN Accelerator School is to run courses on specialised topics in the particle accelerator field. The present volume contains the proceedings of one such course, this time organized in conjunction with the Deutsches Elektronen Synchrotron (DESY) on the subject of superconductivity in particle accelerators. This course reflects the very considerable progress made over the last few years in the use of the technology for the magnet and radio-frequency systems of many large and small accelerators already in use or nearing completion, while also taking account of the development work now going on for future machines. The lectures cover the theory of superconductivity, cryogenics and accelerator magnets and cavities, while the seminars include superfluidity, superconductors, special magnets and the prospects for high-temperature superconductors. (orig.)
1986-09-01
38 percent, British Aerospace (United Kingdom) 20 percent, and Construcciones Aeronauticas (Spain) 4 percent. Airbus is a French consortium which...Deutsche Air- bus, 26 percent for British Aerospace and 6 percent for Construcciones Aeronauticas (16:56). The A300 and A310 are currently in production and...commuter transport. The codevelopment partners are Construcciones Aeronauticas (Spain) and P. T. Nurtanio (Indonesia). "Engineering and manufacturing
Study on the limiting acceleration rate in the VLEPP linear accelerator
International Nuclear Information System (INIS)
Balakin, V.E.; Brezhnev, O.N.; Zakhvatkin, M.N.
1987-01-01
To realize the design of colliding linear electron-positron beams it is necessary to solve the radical problem of production of accelerating structure with acceleration rate of approximately 100 MeV/m which can accelerate 10 12 particles in a bunch. Results of experimental studies of the limiting acceleration rate in the VLEPP accelerating structure are presented. Accelerating sections of different length were tested. When testing sections 29 cm long the acceleration rate of 55 MeV/m was attained, and for 1 m section the value reached 40 MeV/m. The maximum rate of acceleration (90 MeV/m) was attained when electric field intensity on the structure surface constituted more than 150 MV/m
Particle-accelerator decommissioning
International Nuclear Information System (INIS)
Opelka, J.H.; Mundis, R.L.; Marmer, G.J.; Peterson, J.M.; Siskind, B.; Kikta, M.J.
1979-12-01
Generic considerations involved in decommissioning particle accelerators are examined. There are presently several hundred accelerators operating in the United States that can produce material containing nonnegligible residual radioactivity. Residual radioactivity after final shutdown is generally short-lived induced activity and is localized in hot spots around the beam line. The decommissioning options addressed are mothballing, entombment, dismantlement with interim storage, and dismantlement with disposal. The recycle of components or entire accelerators following dismantlement is a definite possibility and has occurred in the past. Accelerator components can be recycled either immediately at accelerator shutdown or following a period of storage, depending on the nature of induced activation. Considerations of cost, radioactive waste, and radiological health are presented for four prototypic accelerators. Prototypes considered range from small accelerators having minimal amounts of radioactive mmaterial to a very large accelerator having massive components containing nonnegligible amounts of induced activation. Archival information on past decommissionings is presented, and recommendations concerning regulations and accelerator design that will aid in the decommissioning of an accelerator are given
Source-to-accelerator quadrupole matching section for a compact linear accelerator
Seidl, P. A.; Persaud, A.; Ghiorso, W.; Ji, Q.; Waldron, W. L.; Lal, A.; Vinayakumar, K. B.; Schenkel, T.
2018-05-01
Recently, we presented a new approach for a compact radio-frequency (RF) accelerator structure and demonstrated the functionality of the individual components: acceleration units and focusing elements. In this paper, we combine these units to form a working accelerator structure: a matching section between the ion source extraction grids and the RF-acceleration unit and electrostatic focusing quadrupoles between successive acceleration units. The matching section consists of six electrostatic quadrupoles (ESQs) fabricated using 3D-printing techniques. The matching section enables us to capture more beam current and to match the beam envelope to conditions for stable transport in an acceleration lattice. We present data from an integrated accelerator consisting of the source, matching section, and an ESQ doublet sandwiched between two RF-acceleration units.
Hinterberger, F
2006-01-01
The principle of electrostatic accelerators is presented. We consider Cockcroft Walton, Van de Graaff and Tandem Van de Graaff accelerators. We resume high voltage generators such as cascade generators, Van de Graaff band generators, Pelletron generators, Laddertron generators and Dynamitron generators. The speci c features of accelerating tubes, ion optics and methods of voltage stabilization are described. We discuss the characteristic beam properties and the variety of possible beams. We sketch possible applications and the progress in the development of electrostatic accelerators.
Acceleration of 14C beams in electrostatic accelerators
International Nuclear Information System (INIS)
Rowton, L.J.; Tesmer, J.R.
1981-01-01
Operational problems in the production and acceleration of 14 C beams for nuclear structure research in Los Alamos National Laboratory's Van de Graaff accelerators are discussed. Methods for the control of contamination in ion sources, accelerators and personnel are described. Sputter source target fabrication techniques and the relative beam production efficiencies of various types of bound particulate carbon sputter source targets are presented
Multiperiodic accelerator structures for linear particle accelerators
International Nuclear Information System (INIS)
Tran, D.T.
1975-01-01
High efficiency linear accelerator structures, comprised of a succession of cylindrical resonant cavities for acceleration, are described. Coupling annular cavities are located at the periphery, each being coupled to two adjacent cylindrical cavities. (auth)
Beam transport through electrostatic accelerators and matching into post accelerators
International Nuclear Information System (INIS)
Larson, J.D.
1986-01-01
Ion beam transport through electrostatic acceleration is briefly reviewed. Topics discussed include injection, matching into the low-energy acceleration stage, matching from the terminal stripper into the high-energy stage, transport to a post accelerator, space charge, bunching isochronism, dispersion and charge selection. Beam transport plans for the proposed Vivitron accelerator are described. (orig.)
Can Accelerators Accelerate Learning?
International Nuclear Information System (INIS)
Santos, A. C. F.; Fonseca, P.; Coelho, L. F. S.
2009-01-01
The 'Young Talented' education program developed by the Brazilian State Funding Agency (FAPERJ)[1] makes it possible for high-schools students from public high schools to perform activities in scientific laboratories. In the Atomic and Molecular Physics Laboratory at Federal University of Rio de Janeiro (UFRJ), the students are confronted with modern research tools like the 1.7 MV ion accelerator. Being a user-friendly machine, the accelerator is easily manageable by the students, who can perform simple hands-on activities, stimulating interest in physics, and getting the students close to modern laboratory techniques.
Can Accelerators Accelerate Learning?
Santos, A. C. F.; Fonseca, P.; Coelho, L. F. S.
2009-03-01
The 'Young Talented' education program developed by the Brazilian State Funding Agency (FAPERJ) [1] makes it possible for high-schools students from public high schools to perform activities in scientific laboratories. In the Atomic and Molecular Physics Laboratory at Federal University of Rio de Janeiro (UFRJ), the students are confronted with modern research tools like the 1.7 MV ion accelerator. Being a user-friendly machine, the accelerator is easily manageable by the students, who can perform simple hands-on activities, stimulating interest in physics, and getting the students close to modern laboratory techniques.
Doolittle, J H
1925-01-01
This work on accelerometry was done at McCook Field for the purpose of continuing the work done by other investigators and obtaining the accelerations which occur when a high-speed pursuit airplane is subjected to the more common maneuvers. The accelerations obtained in suddenly pulling out of a dive with well-balanced elevators are shown to be within 3 or 4 per cent of the theoretically possible accelerations. The maximum acceleration which a pilot can withstand depends upon the length of time the acceleration is continued. It is shown that he experiences no difficulty under the instantaneous accelerations as high as 7.8 G., but when under accelerations in excess of 4.5 G., continued for several seconds, he quickly loses his faculties.
Theoretical Investigations of Plasma-Based Accelerators and Other Advanced Accelerator Concepts
International Nuclear Information System (INIS)
Shuets, G.
2004-01-01
Theoretical investigations of plasma-based accelerators and other advanced accelerator concepts. The focus of the work was on the development of plasma based and structure based accelerating concepts, including laser-plasma, plasma channel, and microwave driven plasma accelerators
International Nuclear Information System (INIS)
Jones, C.M.
1976-01-01
The increasing importance of energetic heavy ion beams in the study of atomic physics, nuclear physics, and materials science has partially or wholly motivated the construction of a new generation of tandem accelerators designed to operate at maximum terminal potentials in the range 14 to 30 MV. In addition, a number of older tandem accelerators are now being significantly upgraded to improve their heavy ion performance. Both of these developments have reemphasized the importance of negative heavy ion sources. The new large tandem accelerators are described, and the requirements placed on negative heavy ion source technology by these and other tandem accelerators used for the acceleration of heavy ions are discussed. First, a brief description is given of the large tandem accelerators which have been completed recently, are under construction, or are funded for construction, second, the motivation for construction of these accelerators is discussed, and last, criteria for negative ion sources for use with these accelerators are presented
Energy Technology Data Exchange (ETDEWEB)
Beltran-Chacon, R.; Velazquez-Limon, N. [Universidad Autonoma de Baja California, Baja California (Mexico)]. E-mails: rbeltran1@uabc.edu.mx; nicolas.velazquez@uabc.edu.mx; Sauceda-Carvajal, D. [Universidad Politecnica de Baja California, Baja California (Mexico)]. E-mail: dsaucedac@upbc.edu.mx
2012-01-15
This paper presents a mathematical modeling, simulation and design of a solar power system of a parabolic dish with an air-cooled Stirling engine of 2.7 kW. The model used for the solar concentrator, the cavity and the Stirling engine were successfully validated against experimental data. Based on a parametric study, the design of the components of the engine is carried out. The study shows that as system capacity increases, the overall efficiency is limited by the power required by the fan, since the design of the cooler needs greater amounts of heat removal by increasing the air flow without affecting the internal conditions of the process (mass flow of working gas and internal dimensions of the same). The system was optimized and achieves an overall efficiency of solar to electric energy conversion of 26.7%. This study shows that the use of an air-cooled Stirling engine is potentially attractive for power generation at low capacities. [Spanish] Este trabajo presenta un modelado matematico, la simulacion y diseno de un sistema de generacion electrica termosolar de disco parabolico con motor Stirling de 2.7 kW enfriado directamente por aire. El modelo utilizado para el concentrador, la cavidad y el motor Stirling, fueron validados satisfactoriamente con datos experimentales. Con base en un estudio parametrico se realizo el dimensionamiento de los componentes del motor. El estudio realizado muestra que conforme se incrementa la capacidad del sistema, la eficiencia global se ve limitada por la potencia requerida por el ventilador, dado que el diseno del enfriador necesita retirar mayores cantidades de calor aumentando el flujo de aire, sin afectar las condiciones internas del proceso (flujo masico del gas de trabajo y dimensiones internas del mismo). El sistema fue optimizado obteniendo una eficiencia global de conversion de energia solar a electrica de 26.7%. Este estudio muestra que el uso de un motor Stirling enfriado directamente por aire es potencialmente
International Nuclear Information System (INIS)
Dawson, J.M.
1988-01-01
The Superconducting Supercollider (SSC) will require an 87-kilometer accelerator ring to boost particles to 40 TeV. The SSC's size is due in part to the fact that its operating principle is the same one that has dominated accelerator design for 50 years: it guides particles by means of magnetic fields and propels them by strong electric fields. If one were to build an equally powerful but smaller accelerator, one would need to increase the strength of the guiding and propelling fields. Actually, however, conventional technology may not be able to provide significant increases in field strength. There are two reasons. First, the forces from magnetic fields are becoming greater than the structural forces that hold a magnetic material together; the magnets that produce these fields would themselves be torn apart. Second, the energy from electric fields is reaching the energies that bind electrons to atoms; it would tear electrons from nuclei in the accelerator's support structures. It is the electric field problem that plasma accelerators can overcome. Plasma particle accelerators are based on the principle that particles can be accelerated by the electric fields generated within a plasma. Because the plasma has already been ionized, plasma particle accelerators are not susceptible to electron dissociation. They can in theory sustain accelerating fields thousands of times stronger that conventional technologies. So far two methods for creating plasma waves for accelerators have been proposed and tested: the wakefield and the beat wave. Although promising electric fields have been produced, more research is necessary to determine whether plasma particle accelerators can compete with the existing accelerators. 7 figs
Molecular ion acceleration using tandem accelerator
Energy Technology Data Exchange (ETDEWEB)
Saito, Yuichi; Mizuhashi, Kiyoshi; Tajima, Satoshi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment
1996-12-01
In TIARA compound beam radiation system, cluster beams have been produced using 3 MV tandem accelerator (9SDH-2) to supply them to various radiation on injection experiments. Till now, productions of C{sub 2-8}, Si{sub 2-4} and O{sub 2} and their accelerations up to 6 MeV have been succeeded. This study aimed at production and acceleration of B{sub 2-4} and LiF. Anion clusters were produced using the conventional ion source of cesium sputter type. The proportions of atoms, molecules and clusters elicited from the ion source were varied depending on the material`s properties and the operating conditions of ion source such as sample temperature, sputter voltage and the shape of sample. The anion clusters were accelerated toward the high voltage terminal in the center of tandem accelerator, leading to cations through losing their electrons by the collision to N{sub 2} gas in a charge conversion cell at the terminal. Positively charged cluster ions could be obtained by modulating the pressure of N{sub 2} gas. Thus, B{sub 2} (64 nA), B{sub 3} (4.4 nA) and B{sub 4} (2.7 nA) have been produced and their maximum survival probabilities were higher than those of carbon or silicon clusters. In addition, the relationship between beam current and gas pressure was investigated for Bn (n = 2-4) and LiF. (M.N.)
TeV/m Nano-Accelerator: Current Status of CNT-Channeling Acceleration Experiment
Energy Technology Data Exchange (ETDEWEB)
Shin, Young Min [Northern Illinois U.; Lumpkin, Alex H. [Fermilab; Thangaraj, Jayakar Charles [Fermilab; Thurman-Keup, Randy Michael [Fermilab; Shiltsev, Vladimir D. [Fermilab
2014-09-17
Crystal channeling technology has offered various opportunities in the accelerator community with a viability of ultrahigh gradient (TV/m) acceleration for future HEP collider. The major challenge of channeling acceleration is that ultimate acceleration gradients might require a high power driver in the hard x-ray regime (~ 40 keV). This x-ray energy exceeds those for x-rays as of today, although x-ray lasers can efficiently excite solid plasma and accelerate particles inside a crystal channel. Moreover, only disposable crystal accelerators are possible at such high externally excited fields which would exceed the ionization thresholds destroying the atomic structure, so acceleration will take place only in a short time before full dissociation of the lattice. Carbon-based nanostructures have great potential with a wide range of flexibility and superior physical strength, which can be applied to channeling acceleration. This paper presents a beam- driven channeling acceleration concept with CNTs and discusses feasible experiments with the Advanced Superconducting Test Accelerator (ASTA) in Fermilab.
Accelerator mass spectrometry at the Rossendorf 5 MV tandem accelerator
International Nuclear Information System (INIS)
Friedrich, M.; Buerger, W.; Curian, H.; Hartmann, B.; Hentschel, E.; Matthes, H.; Probst, W.; Seidel, M.; Turuc, S.; Hebert, D.; Rothe, T.; Stolz, W.
1992-01-01
The Rossendorf electrostatic accelerators (5 MV tandem accelerator and single ended 2 MV van de Graaff accelerator) are already used for ion beam analysis. The existing methods (RBS, PIXE, ERDA, NRA, nuclear microprobe and external beam) will be completed by introduction of Accelerator Mass Spectrometry (AMS). A short description of the Rossendorf AMS system is given and first experimental results are presented. (R.P.) 4 refs.; 6 figs
Truck acceleration behavior study and acceleration lane length recommendations for metered on-ramps
Directory of Open Access Journals (Sweden)
Guangchuan Yang
2016-10-01
Full Text Available This paper investigated the actual truck acceleration capability at metered on-ramps. Truck acceleration performance data were collected through a video-based data collection method. A piecewise constant acceleration model was employed to capture truck acceleration characteristics. It was found that the existing acceleration length will affect truck drivers’ acceleration behavior. At the taper type ramp that has limited acceleration distance, acceleration profile indicated a decreasing trend with distance. While for the ramp with an auxiliary lane that has sufficient acceleration distance, it was found that the acceleration behavior is to have a high acceleration rate in the beginning, then acceleration rate decrease with speed increase, and high acceleration rate again as drivers approach the merging area. Field data show that the truck acceleration performance data documented in the ITE’s (Institute of Transportation Engineers “Traffic Engineering Handbook” are much lower than the field collected data. Also, based on the regression analysis of speed versus distance profiles, it was found that the AASHTO’s (American Association of State Highway and Transportation Officials Green Book acceleration length design guidance is insufficient to accommodate trucks at metered on-ramps. The required acceleration lengths for medium and heavy trucks are approximately 1.3 and 1.6 times of the Green Book design guideline, respectively.
Probing electron acceleration and x-ray emission in laser-plasma accelerators
International Nuclear Information System (INIS)
Thaury, C.; Ta Phuoc, K.; Corde, S.; Brijesh, P.; Lambert, G.; Malka, V.; Mangles, S. P. D.; Bloom, M. S.; Kneip, S.
2013-01-01
While laser-plasma accelerators have demonstrated a strong potential in the acceleration of electrons up to giga-electronvolt energies, few experimental tools for studying the acceleration physics have been developed. In this paper, we demonstrate a method for probing the acceleration process. A second laser beam, propagating perpendicular to the main beam, is focused on the gas jet few nanosecond before the main beam creates the accelerating plasma wave. This second beam is intense enough to ionize the gas and form a density depletion, which will locally inhibit the acceleration. The position of the density depletion is scanned along the interaction length to probe the electron injection and acceleration, and the betatron X-ray emission. To illustrate the potential of the method, the variation of the injection position with the plasma density is studied
Microelectromechanical acceleration-sensing apparatus
Lee, Robb M [Albuquerque, NM; Shul, Randy J [Albuquerque, NM; Polosky, Marc A [Albuquerque, NM; Hoke, Darren A [Albuquerque, NM; Vernon, George E [Rio Rancho, NM
2006-12-12
An acceleration-sensing apparatus is disclosed which includes a moveable shuttle (i.e. a suspended mass) and a latch for capturing and holding the shuttle when an acceleration event is sensed above a predetermined threshold level. The acceleration-sensing apparatus provides a switch closure upon sensing the acceleration event and remains latched in place thereafter. Examples of the acceleration-sensing apparatus are provided which are responsive to an acceleration component in a single direction (i.e. a single-sided device) or to two oppositely-directed acceleration components (i.e. a dual-sided device). A two-stage acceleration-sensing apparatus is also disclosed which can sense two acceleration events separated in time. The acceleration-sensing apparatus of the present invention has applications, for example, in an automotive airbag deployment system.
International Nuclear Information System (INIS)
Mazarakis, M.G.; Smith, D.L.; Poukey, J.W.; Wagner, J.S.; Bennett, L.F.; Olson, W.R.; Turman, B.N.; Prestwich, K.R.; Wells, J.; Struve, K.
1992-01-01
The lifetime of the Ion Focusing Regime (IFR) channel following the pulsing of the post-accelerating gaps is critical for open-ended low energy devices. It dictates the number of allowable beam recirculations through the gaps. In the case of a closed racetrack configuration, it is significant but not as critical, since the presence of the electron beam focuses the ions and lengthens the lifetime of the ion channel. The authors have experimentally established that pulsing an accelerating gap perturbs the IFR channel. However for the parameters studied, the lifetime is long enough to allow at least four beam recirculations in a spiral device. In addition transparent grids of cusp fields positioned upstream and downstream from the gaps prevent them from perturbing the IFR channel. Experiments were performed with and without injected electron beams. For the experiments investigating the IFR channel interaction with the accelerating gap, the injector was removed and the beam line was extended downstream and upstream from the accelerating cavity. Only the first straight section of the RLA with one accelerating cavity (ET-2) was utilized. The acceleration and transport experiments were performed utilizing two injectors: first the low energy 1.3-MV Isolated Blumlein (IB) injector and most recently the new 4-MV 20-kA injector. Beams of 6--20 kA current were produced and successfully transported and accelerated through the ET-2 post-accelerating gap. For both injectors an apertured non-immersed ion-focused foilless diode was selected among various options. It is the simplest and easiest to operate and can be adjusted to provide variable beam impedance loads to the injector. The transport efficiencies were 90% for the low energy injector and 100% for the new 4-MV injector. The beam Gaussian profile and radius (5 mm) remain the same through acceleration. Experimental results will be presented and compared with numerical simulations
Accelerator reliability workshop
International Nuclear Information System (INIS)
Hardy, L.; Duru, Ph.; Koch, J.M.; Revol, J.L.; Van Vaerenbergh, P.; Volpe, A.M.; Clugnet, K.; Dely, A.; Goodhew, D.
2002-01-01
About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop
Accelerator reliability workshop
Energy Technology Data Exchange (ETDEWEB)
Hardy, L; Duru, Ph; Koch, J M; Revol, J L; Van Vaerenbergh, P; Volpe, A M; Clugnet, K; Dely, A; Goodhew, D
2002-07-01
About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop.
International Nuclear Information System (INIS)
Sessler, A.M.
1986-05-01
A general discussion is presented of the acceleration of particles. Upon this foundation is built a categorization scheme into which all accelerators can be placed. Special attention is devoted to accelerators which employ a wake-field mechanism and a restricting theorem is examined. It is shown how the theorem may be circumvented. Comments are made on various acceleration schemes
AUTHOR|(CDS)2266999
2017-01-01
CERN has been involved in the dissemination of scientific results since its early days and has continuously updated the distribution channels. Currently, Inspire hosts catalogues of articles, authors, institutions, conferences, jobs, experiments, journals and more. Successful orientation among this amount of data requires comprehensive linking between the content. Inspire has lacked a system for linking experiments and articles together based on which accelerator they were conducted at. The purpose of this project has been to create such a system. Records for 156 accelerators were created and all 2913 experiments on Inspire were given corresponding MARC tags. Records of 18404 accelerator physics related bibliographic entries were also tagged with corresponding accelerator tags. Finally, as a part of the endeavour to broaden CERN's presence on Wikipedia, existing Wikipedia articles of accelerators were updated with short descriptions and links to Inspire. In total, 86 Wikipedia articles were updated. This repo...
Requirements of a proton beam accelerator for an accelerator-driven reactor
International Nuclear Information System (INIS)
Takahashi, H.; Zhao, Y.; Tsoupas, N.; An, Y.; Yamazaki, Y.
1997-01-01
When the authors first proposed an accelerator-driven reactor, the concept was opposed by physicists who had earlier used the accelerator for their physics experiments. This opposition arose because they had nuisance experiences in that the accelerator was not reliable, and very often disrupted their work as the accelerator shut down due to electric tripping. This paper discusses the requirements for the proton beam accelerator. It addresses how to solve the tripping problem and how to shape the proton beam
SALOME: An Accelerator for the Practical Course in Accelerator Physics
Miltchev, Velizar; Riebesehl, Daniel; Roßbach, Jörg; Trunk, Maximilian; Stein, Oliver
2014-01-01
SALOME (Simple Accelerator for Learning Optics and the Manipulation of Electrons) is a short low energy linear electron accelerator built by the University of Hamburg. The goal of this project is to give the students the possibility to obtain hands-on experience with the basics of accelerator physics. In this contribution the layout of the device will be presented. The most important components of the accelerator will be discussed and an overview of the planned demonstration experiments will ...
Hoogeveen, Lianne; van Hell, Janet G; Verhoeven, Ludo
2012-12-01
In the studies of acceleration conducted so far a multidimensional perspective has largely been neglected. No attempt has been made to relate social-emotional characteristics of accelerated versus non-accelerated students in perspective of environmental factors. In this study, social-emotional characteristics of accelerated gifted students in the Netherlands were examined in relation to personal and environmental factors. Self-concept and social contacts of accelerated (n = 148) and non-accelerated (n = 55) gifted students, aged 4 to 27 (M = 11.22, SD = 4.27) were measured. Self-concept and social contacts of accelerated and non-accelerated gifted students were measured using a questionnaire and a diary, and parents of these students evaluated their behavioural characteristics. Gender and birth order were studied as personal factors and grade, classroom, teachers' gender, teaching experience, and the quality of parent-school contact as environmental factors. The results showed minimal differences in the social-emotional characteristics of accelerated and non-accelerated gifted students. The few differences we found favoured the accelerated students. We also found that multiple grade skipping does not have negative effects on social-emotional characteristics, and that long-term effects of acceleration tend to be positive. As regards the possible modulation of personal and environmental factors, we merely found an impact of such factors in the non-accelerated group. The results of this study strongly suggest that social-emotional characteristics of accelerated gifted students and non-accelerated gifted students are largely similar. These results thus do not support worries expressed by teachers about the acceleration of gifted students. Our findings parallel the outcomes of earlier studies in the United States and Germany in that we observed that acceleration does not harm gifted students, not even in the case of multiple grade skipping. On the contrary, there is a
Antonella Del Rosso
2015-01-01
The image that most people have of CERN is of its enormous accelerators and their capacity to accelerate particles to extremely high energies. But thanks to some cutting-edge studies on beam dynamics and radiofrequency technology, along with innovative construction techniques, teams at CERN have now created the first module of a brand-new accelerator, which will be just 2 metres long. The potential uses of this miniature accelerator will include deployment in hospitals for the production of medical isotopes and the treatment of cancer. It’s a real David-and-Goliath story. Serge Mathot, in charge of the construction of the "mini-RFQ", pictured with the first of the four modules that will make up the miniature accelerator. The miniature accelerator consists of a radiofrequency quadrupole (RFQ), a component found at the start of all proton accelerator chains around the world, from the smallest to the largest. The LHC is designed to produce very high-intensity beams ...
International Nuclear Information System (INIS)
Inoue, Makoto
2000-01-01
A particle accelerator is a device to consume energy but not to produce it. Then, the titled accelerator seems to mean an accelerator for using devices related to nuclear energy. For an accelerator combined to nuclear fissionable fuel, neutron sources are D-T type, (gamma, n) reaction using electron beam type spallation type, and so forth. At viewpoints of powers of incident beam and formed neutron, a spallation type source using high energy proton is told to be effective but others have some advantages by investigation on easy operability, easy construction, combustion with target, energy and directivity of neutron, and so forth. Here were discussed on an accelerator for research on accelerator driven energy system by dividing its researching steps, and on kind, energy, beam intensity, and so forth of an accelerator suitable for it. And, space electric charge effect at beam propagation direction controlled by beam intensity of cyclotron was also commented. (G.K.)
Hinterberger, F
2006-01-01
The principle of electrostatic accelerators is presented. We consider Cockcroft Walton, Van de Graaff and Tandem Van de Graaff accelerators. We resume high voltage generators such as cascade generators, Van de Graaff band generators, Pelletron generators, Laddertron generators and Dynamitron generators. The speci c features of accelerating tubes, ion optics and methods of voltage stabilization are described. We discuss the characteristic beam properties and the variety of possible beams. We ...
Superconducting accelerator technology
International Nuclear Information System (INIS)
Grunder, H.A.; Hartline, B.K.
1986-01-01
Modern and future accelerators for high energy and nuclear physics rely increasingly on superconducting components to achieve the required magnetic fields and accelerating fields. This paper presents a practical overview of the phenomenon of superconductivity, and describes the design issues and solutions associated with superconducting magnets and superconducting rf acceleration structures. Further development and application of superconducting components promises increased accelerator performance at reduced electric power cost
Sector ring accelerator ''RESATRON''
International Nuclear Information System (INIS)
Schwabe, E.
1980-01-01
Project of sector ring accelerator RESATRON is described. The curiosity of this accelerator is the second cycle of acceleration of the beam after stripping it on the foil. In such an accelerator heavy ions with a different ratio Z to A can be accelerated. (S.B.)
2014 Joint International Accelerator School: Beam Loss and Accelerator Protection
JAS - Joint US-CERN-Japan-Russia Accelerator School
2016-01-01
Many particle accelerators operate with very high beam power and very high energy stored in particle beams as well as in magnet systems. In the future, the beam power in high intensity accelerators will further increase. The protection of the accelerator equipment from the consequences of uncontrolled release of the energy is essential. This was the motivation for organizing a first school on beam losses and accelerator protection (in general referred to as machine protection). During the school the methods and technologies to identify, mitigate, monitor and manage the technical risks associated with the operation of accelerators with high-power beams or subsystems with large stored energy were presented. At the completion of the school the participants should have been able to understand the physical phenomena that can damage machine subsystems or interrupt operations and to analyze an accelerator facility to produce a register of technical risks and the corresponding risk mitigation and management strategie...
International Nuclear Information System (INIS)
Vretenar, M
2014-01-01
The main features of radio-frequency linear accelerators are introduced, reviewing the different types of accelerating structures and presenting the main characteristics aspects of linac beam dynamics
Accelerator structure for a charged particle linear accelerator working in standing wave mode
International Nuclear Information System (INIS)
Tran, D.T.; Tronc, Dominique.
1977-01-01
Charged particle accelerators generally include a pre-grouping or pre-accelerating structure associated with the accelerator structure itself. But pre-grouping or pre-accelerating structures of known type (Patent application No. 70 39261 for example) present electric and dimensional characteristics that rule them out for accelerators working at high frequencies (C or X bands for example), since the distance separating the interaction spaces becomes very small in this case. The accelerator structure mentioned in this invention can be used to advantage for such accelerators [fr
Development of bipolar pulse accelerator for intense pulsed ion beam acceleration
International Nuclear Information System (INIS)
Fujioka, Y.; Mitsui, C.; Kitamura, I.; Takahashi, T.; Masugata, K.; Tanoue, H.; Arai, K.
2003-01-01
To improve the purity of an intense pulsed ion beams a new type of pulsed ion beam accelerator named 'bipolar pulse accelerator (BPA)' was proposed. In the accelerator purity of the beam is expected. To confirm the principle of the accelerator experimental system was developed. The system utilizes B y type magnetically insulated acceleration gap and operated with single polar negative pulse. A coaxial gas puff plasma gun placed in the grounded anode was used as an ion source, and source plasma (nitrogen) of current density approx. = 25 A/cm 2 , duration approx. = 1.5 μs was injected into the acceleration gap. The ions are successfully accelerated from the grounded anode to the drift tube by applying negative pulse of voltage 180 kV, duration 60 ns to the drift tube. Pulsed ion beam of current density approx. = 40 A/cm 2 , duration approx. 60 ns was obtained at 42 mm downstream from the anode surface. (author)
Directory of Open Access Journals (Sweden)
T. Iwashita
2011-07-01
Full Text Available The High Energy Accelerator Research Organization KEK digital accelerator (KEK-DA is a renovation of the KEK 500 MeV booster proton synchrotron, which was shut down in 2006. The existing 40 MeV drift tube linac and rf cavities have been replaced by an electron cyclotron resonance (ECR ion source embedded in a 200 kV high-voltage terminal and induction acceleration cells, respectively. A DA is, in principle, capable of accelerating any species of ion in all possible charge states. The KEK-DA is characterized by specific accelerator components such as a permanent magnet X-band ECR ion source, a low-energy transport line, an electrostatic injection kicker, an extraction septum magnet operated in air, combined-function main magnets, and an induction acceleration system. The induction acceleration method, integrating modern pulse power technology and state-of-art digital control, is crucial for the rapid-cycle KEK-DA. The key issues of beam dynamics associated with low-energy injection of heavy ions are beam loss caused by electron capture and stripping as results of the interaction with residual gas molecules and the closed orbit distortion resulting from relatively high remanent fields in the bending magnets. Attractive applications of this accelerator in materials and biological sciences are discussed.
Semiconductor acceleration sensor
Ueyanagi, Katsumichi; Kobayashi, Mitsuo; Goto, Tomoaki
1996-09-01
This paper reports a practical semiconductor acceleration sensor especially suited for automotive air bag systems. The acceleration sensor includes four beams arranged in a swastika structure. Two piezoresistors are formed on each beam. These eight piezoresistors constitute a Wheatstone bridge. The swastika structure of the sensing elements, an upper glass plate and a lower glass plate exhibit the squeeze film effect which enhances air dumping, by which the constituent silicon is prevented from breakdown. The present acceleration sensor has the following features. The acceleration force component perpendicular to the sensing direction can be cancelled. The cross-axis sensitivity is less than 3 percent. And, the erroneous offset caused by the differences between the thermal expansion coefficients of the constituent materials can be canceled. The high aspect ratio configuration realized by plasma etching facilitates reducing the dimensions and improving the sensitivity of the acceleration sensor. The present acceleration sensor is 3.9 mm by 3.9 mm in area and 1.2 mm in thickness. The present acceleration sensor can measure from -50 to +50 G with sensitivity of 0.275 mV/G and with non-linearity of less than 1 percent. The acceleration sensor withstands shock of 3000 G.
Large electrostatic accelerators
Energy Technology Data Exchange (ETDEWEB)
Jones, C.M.
1984-01-01
The increasing importance of energetic heavy ion beams in the study of atomic physics, nuclear physics, and materials science has partially or wholly motivated the construction of a new generation of large electrostatic accelerators designed to operate at terminal potentials of 20 MV or above. In this paper, the author briefly discusses the status of these new accelerators and also discusses several recent technological advances which may be expected to further improve their performance. The paper is divided into four parts: (1) a discussion of the motivation for the construction of large electrostatic accelerators, (2) a description and discussion of several large electrostatic accelerators which have been recently completed or are under construction, (3) a description of several recent innovations which may be expected to improve the performance of large electrostatic accelerators in the future, and (4) a description of an innovative new large electrostatic accelerator whose construction is scheduled to begin next year. Due to time and space constraints, discussion is restricted to consideration of only tandem accelerators.
Large electrostatic accelerators
International Nuclear Information System (INIS)
Jones, C.M.
1984-01-01
The increasing importance of energetic heavy ion beams in the study of atomic physics, nuclear physics, and materials science has partially or wholly motivated the construction of a new generation of large electrostatic accelerators designed to operate at terminal potentials of 20 MV or above. In this paper, the author briefly discusses the status of these new accelerators and also discusses several recent technological advances which may be expected to further improve their performance. The paper is divided into four parts: (1) a discussion of the motivation for the construction of large electrostatic accelerators, (2) a description and discussion of several large electrostatic accelerators which have been recently completed or are under construction, (3) a description of several recent innovations which may be expected to improve the performance of large electrostatic accelerators in the future, and (4) a description of an innovative new large electrostatic accelerator whose construction is scheduled to begin next year. Due to time and space constraints, discussion is restricted to consideration of only tandem accelerators
CERN Accelerator School: Registration open for Advanced Accelerator Physics course
2015-01-01
Registration is now open for the CERN Accelerator School’s Advanced Accelerator Physics course to be held in Warsaw, Poland from 27 September to 9 October 2015. The course will be of interest to physicists and engineers who wish to extend their knowledge of accelerator physics. The programme offers core lectures on accelerator physics in the mornings and a practical course with hands-on tuition in the afternoons. Further information can be found at: http://cas.web.cern.ch/cas/Poland2015/Warsaw-advert.html http://indico.cern.ch/event/361988/
CERN Accelerator School: Registration open for Advanced Accelerator Physics course
2015-01-01
Registration is now open for the CERN Accelerator School’s Advanced Accelerator Physics course to be held in Warsaw, Poland from 27 September to 9 October 2015. The course will be of interest to physicists and engineers who wish to extend their knowledge of Accelerator Physics. The programme offers core lectures on accelerator physics in the mornings and a practical course with hands-on tuition in the afternoons. Further information can be found at: http://cas.web.cern.ch/cas/Poland2015/Warsaw-advert.html http://indico.cern.ch/event/361988/
International Nuclear Information System (INIS)
Schmelzer, C.
1974-01-01
This review of the present state of work on heavy-ion accelerators pays particular attention to the requirements for nuclear research. It is divided into the following sections: single-particle versus collective acceleration, heavy-ion accelerators, beam quality, and a status report on the UNILAC facility. Among the topics considered are the recycling cyclotron, linacs with superconducting resonators, and acceleration to the GeV/nucleon range. (8 figures, 2 tables) (U.S.)
Energy Technology Data Exchange (ETDEWEB)
Anon.
1986-06-15
Latest subject covered by the CERN Accelerator School was 'Applied Geodesy of Particle Accelerators', which attracted an impressive number of outside participants to CERN for a week in April. Since the forerunners of today's particle accelerators were demonstrated over 50 years ago, the positioning of accelerator components has progressed from the laboratory bench-top to tunnels tens of kilometres long. Despite this phenomenal growth in size, sub-millimetre accuracy is still required.
International Nuclear Information System (INIS)
Palmer, R.
1994-06-01
Electromagnetic fields can be separated into near and far components. Near fields are extensions of static fields. They do not radiate, and they fall off more rapidly from a source than far fields. Near fields can accelerate particles, but the ratio of acceleration to source fields at a distance R, is always less than R/λ or 1, whichever is smaller. Far fields can be represented as sums of plane parallel, transversely polarized waves that travel at the velocity of light. A single such wave in a vacuum cannot give continuous acceleration, and it is shown that no sums of such waves can give net first order acceleration. This theorem is proven in three different ways; each method showing a different aspect of the situation
Cosmic ray acceleration mechanisms
International Nuclear Information System (INIS)
Cesarsky, C.J.
1982-09-01
We present a brief summary of some of the most popular theories of cosmic ray acceleration: Fermi acceleration, its application to acceleration by shocks in a scattering medium, and impulsive acceleration by relativistic shocks
FERMILAB ACCELERATOR R&D PROGRAM TOWARDS INTENSITY FRONTIER ACCELERATORS : STATUS AND PROGRESS
Energy Technology Data Exchange (ETDEWEB)
Shiltsev, Vladimir [Fermilab
2016-11-15
The 2014 P5 report indicated the accelerator-based neutrino and rare decay physics research as a centrepiece of the US domestic HEP program at Fermilab. Operation, upgrade and development of the accelerators for the near- term and longer-term particle physics program at the Intensity Frontier face formidable challenges. Here we discuss key elements of the accelerator physics and technology R&D program toward future multi-MW proton accelerators and present its status and progress. INTENSITY FRONTIER ACCELERATORS
International Nuclear Information System (INIS)
Anon.
1986-01-01
Latest subject covered by the CERN Accelerator School was 'Applied Geodesy of Particle Accelerators', which attracted an impressive number of outside participants to CERN for a week in April. Since the forerunners of today's particle accelerators were demonstrated over 50 years ago, the positioning of accelerator components has progressed from the laboratory bench-top to tunnels tens of kilometres long. Despite this phenomenal growth in size, sub-millimetre accuracy is still required
International Nuclear Information System (INIS)
Turner, N.L.
1982-01-01
A particle beam accelerator is described which has several electrodes that are selectively short circuited together synchronously with changes in the magnitude of a DC voltage applied to the accelerator. By this method a substantially constant voltage gradient is maintained along the length of the unshortened electrodes despite variations in the energy applied to the beam by the accelerator. The invention has particular application to accelerating ion beams that are implanted into semiconductor wafers. (U.K.)
Large electrostatic accelerators
International Nuclear Information System (INIS)
Jones, C.M.
1984-01-01
The paper is divided into four parts: a discussion of the motivation for the construction of large electrostatic accelerators, a description and discussion of several large electrostatic accelerators which have been recently completed or are under construction, a description of several recent innovations which may be expected to improve the performance of large electrostatic accelerators in the future, and a description of an innovative new large electrostatic accelerator whose construction is scheduled to begin next year
JAERI 20 MV tandem accelerator
International Nuclear Information System (INIS)
Tsukada, Kineo; Harada, Kichinosuke
1977-01-01
Accelerators have been developed as the experimental apparatuses for the studies on nuclei and elementary particles. One direction of the development is the acceleration of protons and electrons to more and more high energy, and another direction is the acceleration of heavy ions up to uranium to several MeV up to several hundreds MeV. However recently, accelerators are used as the useful tools for the studies in wider fields. There are electrostatic acceleration and high frequency acceleration in ion acceleration, and at present, super-large accelerators are high frequency acceleration type. In Japan Atomic Energy Research Institute, it was decided in 1975 to construct an electrostatic accelerator of tandem type in order to accelerate heavy ions. In case of the electrostatic acceleration, the construction is relatively simple, the acceleration of heavy ions is easy, the property of the ion beam is very good, and the energy is stable. Especially, the tandem type is convenient for obtaining high energy. The tandem accelerator of 20 MV terminal voltage was ordered from the National Electrostatics Corp., USA, and is expected to be completed in 1978. The significance of heavy ion acceleration in the development and research of atomic energy, tandem van de Graaff accelerators, the JAERI 20MV tandem accelerator, and the research project with this accelerator are described. (Kako, I.)
An introduction to acceleration mechanisms
International Nuclear Information System (INIS)
Palmer, R.B.
1987-05-01
This paper discusses the acceleration of charged particles by electromagnetic fields, i.e., by fields that are produced by the motion of other charged particles driven by some power source. The mechanisms that are discussed include: Ponderamotive Forces, Acceleration, Plasma Beat Wave Acceleration, Inverse Free Electron Laser Acceleration, Inverse Cerenkov Acceleration, Gravity Acceleration, 2D Linac Acceleration and Conventional Iris Loaded Linac Structure Acceleration
CAS CERN Accelerator School second advanced accelerator physics course
International Nuclear Information System (INIS)
Turner, S.
1989-01-01
The advanced course on general accelerator physics given in West Berlin closely followed that organised by the CERN Accelerator School at Oxford in September 1985 and whose proceedings were published as CERN Yellow Report 87-03 (1987). However, certain subjects were treated in a different way, improved or extended, while some new ones were introduced and it is all of these which are included in the present proceedings. The lectures include particle-photon interactions, high-brilliance lattices and single/multiple Touschek effect, while the seminars are on the major accelerators presently under construction or proposed for the near future, applications of synchrotron radiation, free-electron lasers, cosmic accelerators and crystal beams. Also included are errata, and addenda to some of the lectures, of CERN 87-03. (orig.)
2014 CERN Accelerator Schools: Beam Loss and Accelerator Protection
2014-01-01
The US-CERN-JAPAN-RUSSIA Joint International Accelerator School is organising a course on Beam Loss and Accelerator Protection to be held in Newport Beach, California, USA from 5-14 November, 2014. This school is intended for physicists and engineers who are or may be engaged in the design, construction, and/or operation of accelerators with high power photon or particle beams and/or accelerator sub-systems with large stored energy. Application deadlines are 15 August and 4 September. Further information on this Joint School can be found at: http://cas.web.cern.ch/cas/JAS/Newport%20Beach%202014/NPBadvert.html http://indico.cern.ch/event/287647/ http://uspas.fnal.gov/programs/JAS/JAS14.shtml
International Nuclear Information System (INIS)
Sugihara, Ryo.
1987-05-01
A unique particle acceleration by an electrostatic (ES) wave, a magnetosonic shock wave as well as an electromagnetic (EM) wave is reviewed. The principle of the acceleration is that when a charged particle is carried across an external magnetic field the charge feels a DC field (the Lorentz force) and is accelerated. The theory for the ES wave acceleration is experimentally verified thought it is semi-quantitative. The shock acceleration is extensively studied theoretically and in a particle simulation method and the application is extended to phenomena in interplanetary space. The EM wave acceleration is based on a trapping in a moving neutral sheet created by the wave magnetic field and the external magnetic field, and the particle can be accelerated indefinitely. A brief sketch on a slow-wave-structure for this acceleration will be given. (author)
Acceleration of polarized proton in high energy accelerators
International Nuclear Information System (INIS)
Lee, S.Y.
1991-01-01
In low to medium energy accelerators, betatron tune jumps and vertical orbit harmonic correction methods have been used to overcome the intrinsic and imperfection resonances. At high energy accelerators, snakes are needed to preserve polarization. The author analyzes the effects of snake resonances, snake imperfections, and overlapping resonances on spin depolarization. He discusses also results of recent snake experiments at the IUCF Cooler Ring. The snake can overcome various kinds of spin depolarization resonances. These experiments pointed out further that partial snake can be used to cure the imperfection resonances in low to medium energy accelerators
International Nuclear Information System (INIS)
Godfrey, B.B.; Faehl, R.J.; Newberger, B.S.; Shanahan, W.R.; Thode, L.E.
1977-01-01
Progress achieved in the understanding and development of collective ion acceleration is presented. Extensive analytic and computational studies of slow cyclotron wave growth on an electron beam in a helix amplifier were performed. Research included precise determination of linear coupling between beam and helix, suppression of undesired transients and end effects, and two-dimensional simulations of wave growth in physically realizable systems. Electrostatic well depths produced exceed requirements for the Autoresonant Ion Acceleration feasibility experiment. Acceleration of test ions to modest energies in the troughs of such waves was also demonstrated. Smaller efforts were devoted to alternative acceleration mechanisms. Langmuir wave phase velocity in Converging Guide Acceleration was calculated as a function of the ratio of electron beam current to space-charge limiting current. A new collective acceleration approach, in which cyclotron wave phase velocity is varied by modulation of electron beam voltage, is proposed. Acceleration by traveling Virtual Cathode or Localized Pinch was considered, but appears less promising. In support of this research, fundamental investigations of beam propagation in evacuated waveguides, of nonneutral beam linear eigenmodes, and of beam stability were carried out. Several computer programs were developed or enhanced. Plans for future work are discussed
CERN. Geneva
2018-01-01
This lecture will review the different applications of particle accelerators to the medical field, from cancer treatment with beams of accelerator-produced particles (photons, electrons, protons, ions and neutrons) to the generation of radioactive isotopes used in medical diagnostics, in cancer therapy and in the new domain of theragnostics. For each application will be outlined the state of the art, the potential, and the accelerator challenges to be faced to meet the increasing demand for therapeutic procedures based on accelerators.
Status report of pelletron accelerator and ECR based heavy ion accelerator programme
International Nuclear Information System (INIS)
Gupta, A.K.
2015-01-01
The BARC-TIFR Pelletron Accelerator is completing twenty seven years of round-the-clock operation, serving diverse users from institutions within and outside DAE. Over the years, various developmental activities and application oriented programs have been initiated at Pelletron Accelerator Facility, resulting into enhanced utilization of the accelerator. We have also been pursuing an ECR based heavy ion accelerator programme under XII th Plan, consisting of an 18 GHz superconducting ECR (Electron Cyclotron Resonance) ion source and a room temperature RFQ (Radio Frequency Quadrupole) followed by low and high beta superconducting niobium resonator cavities. This talk will provide the current status of Pelletron Accelerator and the progress made towards the ECR based heavy ion accelerator program at BARC. (author)
Energy Technology Data Exchange (ETDEWEB)
Castro Felix, Jaime
2004-02-15
With the aid of the theory behind seismically isolated structures and the bi-linear behavior of an isolated system of Multiple Degrees of Freedom (MDOF), the information obtained on the spectral analysis is complemented with the purpose of simulating one itself for the design of a dissipator of seismic energy. The seismicity in the world is briefly explained, (in Mexico in special for the Geothermal Field of Cerro Prieto), the types of earthquakes, etc., to give way to a documentation of the state-of-the-art in advanced seismic resistant systems and to a procedure to establish the level of seismic qualification of electrical equipment from the level of seismic performance for the Mexican Republic. [Spanish] Con la ayuda de la teoria detras de estructuras aisladas sismicamente y el comportamiento bilineal de un sistema de aislamiento de Multiples Grados de Libertad (MDOF), se complementa la informacion recabada sobre el analisis espectral con el fin de simular uno propio para el diseno de un disipador de energia sismica. Se explica brevemente la sismicidad en el mundo, en Mexico, en especial el Campo Geotermico de Cerro Prieto, los tipos de sismos, etc., para dar paso a una documentacion del estado del arte en sistemas sismorresistentes avanzados y a un procedimiento para establecer el nivel de calificacion sismica de equipos electricos a partir del Nivel de desempeno sismico para la Republica Mexicana.
Acceleration parameters for fluid physics with accelerating bodies
CSIR Research Space (South Africa)
Gledhill, Irvy MA
2016-06-01
Full Text Available to an acceleration parameter that appears to be new in fluid physics, but is known in cosmology. A selection of cases for rectilinear acceleration has been chosen to illustrate the point that this parameter alone does not govern regimes of flow about significantly...
Illinois Accelerator Research Center
Kroc, Thomas K.; Cooper, Charlie A.
The Illinois Accelerator Research Center (IARC) hosts a new accelerator development program at Fermi National Accelerator Laboratory. IARC provides access to Fermi's state-of-the-art facilities and technologies for research, development and industrialization of particle accelerator technology. In addition to facilitating access to available existing Fermi infrastructure, the IARC Campus has a dedicated 36,000 ft2 Heavy Assembly Building (HAB) with all the infrastructure needed to develop, commission and operate new accelerators. Connected to the HAB is a 47,000 ft2 Office, Technology and Engineering (OTE) building, paid for by the state, that has office, meeting, and light technical space. The OTE building, which contains the Accelerator Physics Center, and nearby Accelerator and Technical divisions provide IARC collaborators with unique access to world class expertise in a wide array of accelerator technologies. At IARC scientists and engineers from Fermilab and academia work side by side with industrial partners to develop breakthroughs in accelerator science and translate them into applications for the nation's health, wealth and security.
International Nuclear Information System (INIS)
Berg, J. Scott; Kahn, Stephen; Palmer, Robert; Trbojevic, Dejan; Johnstone, Carol; Keil, Eberhard; Aiba, Masamitsu; Machida, Shinji; Mori, Yoshiharu; Ogitsu, Toru; Ohmori, Chihiro; Sessler, Andrew; Koscielniak, Shane
2003-01-01
Due to their finite lifetime, muons must be accelerated very rapidly. It is challenging to make the magnets ramp fast enough to accelerate in a synchrotron, and accelerating in a linac is very expensive. One can use a recirculating accelerator (like CEBAF), but one needs a different arc for each turn, and this limits the number of turns one can use to accelerate, and therefore requires significant amounts of RF to achieve the desired energy gain. An alternative method for muon acceleration is using a fixed field alternating gradient (FFAG) accelerator. Such an accelerator has a very large energy acceptance (a factor of two or three), allowing one to use the same arc with a magnetic field that is constant over time. Thus, one can in principle make as many turns as one can tolerate due to muon decay, therefore reducing the RF cost without increasing the arc cost. This paper reviews the current status of research into the design of FFAGs for muon acceleration. Several current designs are described and compared. General design considerations are also discussed
The electron accelerator Ridgetron
International Nuclear Information System (INIS)
Hayashizaki, N.; Hattori, T.; Odera, M.; Fujisawa, T.
1999-01-01
Many electron accelerators of DC or RF type have been widely used for electron beam irradiation (curing, crosslinking of polymers, sterilization of medical disposables, preservation of food, etc.). Regardless of the acceleration energy, the accelerators to be installed in industrial facilities, have to satisfy the requires of compact size, low power consumption and stable operation. The DC accelerator is realized very compact in the energy under 300 keV, however, it is large to prevent the discharge of an acceleration column in the energy over 300 keV. The RF electron accelerator Ridgetron has been developed to accelerate the continuous beam of the 0.5-10 MeV range in compact space. It is the first example as an electron accelerator incorporated a ridged RF cavity. A prototype system of final energy of 2.5 MeV has been studied to confirm the feasibility at present
High brightness electron accelerator
International Nuclear Information System (INIS)
Sheffield, R.L.; Carlsten, B.E.; Young, L.M.
1994-01-01
A compact high brightness linear accelerator is provided for use, e.g., in a free electron laser. The accelerator has a first plurality of accelerating cavities having end walls with four coupling slots for accelerating electrons to high velocities in the absence of quadrupole fields. A second plurality of cavities receives the high velocity electrons for further acceleration, where each of the second cavities has end walls with two coupling slots for acceleration in the absence of dipole fields. The accelerator also includes a first cavity with an extended length to provide for phase matching the electron beam along the accelerating cavities. A solenoid is provided about the photocathode that emits the electrons, where the solenoid is configured to provide a substantially uniform magnetic field over the photocathode surface to minimize emittance of the electrons as the electrons enter the first cavity. 5 figs
Multipactor Physics, Acceleration, and Breakdown in Dielectric-Loaded Accelerating Structures
International Nuclear Information System (INIS)
Fischer, Richard P.; Gold, Steven H.
2016-01-01
The objective of this 3-year program is to study the physics issues associated with rf acceleration in dielectric-loaded accelerating (DLA) structures, with a focus on the key issue of multipactor loading, which has been found to cause very significant rf power loss in DLA structures whenever the rf pulsewidth exceeds the multipactor risetime (~10 ns). The experiments are carried out in the X-band magnicon laboratory at the Naval Research Laboratory (NRL) in collaboration with Argonne National Laboratory (ANL) and Euclid Techlabs LLC, who develop the test structures with support from the DoE SBIR program. There are two main elements in the research program: (1) high-power tests of DLA structures using the magnicon output (20 MW @11.4 GHz), and (2) tests of electron acceleration in DLA structures using relativistic electrons from a compact X-band accelerator. The work during this period has focused on a study of the use of an axial magnetic field to suppress multipactor in DLA structures, with several new high power tests carried out at NRL, and on preparation of the accelerator for the electron acceleration experiments.
International Nuclear Information System (INIS)
Arakawa, Kazuo.
1969-01-01
An accelerator is disclosed having a device which permits the electrodes of an accelerator tube to be readily conditioned in an uncomplicated manner before commencing operation. In particle accelerators, it is necessary to condition the accelerator electrodes before a stable high voltage can be applied. Large current accelerators of the cockcroft-walton type require a complicated manual operation which entails applying to the electrodes a low voltage which is gradually increased to induce a vacuum discharge and then terminated. When the discharge attains an extremely low level, the voltage is again impressed and again raised to a high value in low current type accelerators, a high voltage power supply charges the electrodes once to induce discharge followed by reapplying the voltage when the vacuum discharge reaches a low level, according to which high voltage is automatically applied. This procedure, however, requires that the high voltage power supply be provided with a large internal resistance to limit the current to within several milliamps. The present invention connects a high voltage power supply and an accelerator tube through a discharge current limiting resistor wired in parallel with a switch. Initially, the switch is opened enabling the power supply to impress a voltage limited to a prescribed value by a suitably chosen resistor. Conditioning is effected by allowing the voltage between electrodes to increase and is followed by closing the switch through which high voltage is applied directly to the accelerator for operation. (K.J. Owens)
CAS CERN Accelerator School: Advanced accelerator physics. Proceedings. Vol. 2
International Nuclear Information System (INIS)
Turner, S.
1987-01-01
This advanced course on general accelerator physics is the second of the biennial series given by the CERN Accelerator School and follows on from the first basic course given at Gif-sur-Yvette, Paris, in 1984. Stress is placed on the mathematical tools of Hamiltonian mechanics and the Vlasov and Fokker-Planck equations, which are widely used in accelerator theory. The main topics treated in this present work include: nonlinear resonances, chromaticity, motion in longitudinal phase space, growth and control of longitudinal and transverse beam emittance, space-charge effects and polarization. The seminar programme treats some specific accelerator techniques, devices, projects and future possibilities. (orig.)
International Nuclear Information System (INIS)
Abramyan.
1981-01-01
The USSR produces an electron accelerator family of a simple design powered straight from the mains. The specifications are given of accelerators ELITA-400, ELITA-3, ELT-2, TEUS-3 and RIUS-5 with maximum electron energies of 0.3 to 5 MeV, a mean power of 10 to 70 kW operating in both the pulsed and the continuous (TEUS-3) modes. Pulsed accelerators ELITA-400 and ELITA-3 and RIUS-5 in which TESLA resonance transformers are used are characterized by their compact size. (Ha)
Energy Technology Data Exchange (ETDEWEB)
John Womersley
2003-08-21
I describe the future accelerator facilities that are currently foreseen for electroweak scale physics, neutrino physics, and nuclear structure. I will explore the physics justification for these machines, and suggest how the case for future accelerators can be made.
International Nuclear Information System (INIS)
Anon.
1982-01-01
Several devices for using laser fields have been proposed and they can be classified in three broad categories - 'far-field' accelerators (such as the principle of inverse free electron lasers), 'media' accelerators (which, for example, use the inverse Cherenkov effect or laser-controlled plasma waves), and 'near-field' accelerators (using a loaded guiding structure such as cavities or gratings). These different approaches come from the fact that a particle cannot be accelerated by the absorption of single photons (because of momentum conservation) and thus some other element has to intervene. (orig./HSI).
International Nuclear Information System (INIS)
Dasgupta, S.
1994-01-01
Accelerators are research machines which produce energetic particle beam for use as projectiles to effect nuclear reactions. These machines along with their services and facilities may occupy very large areas. The man-machine interface of accelerators has evolved with technological changes in the computer industry and may be partitioned into three phases. The present paper traces the evolution of man-machine interface from the earliest accelerators to the present computerized systems incorporated in modern accelerators. It also discusses the advantages of incorporating expert system technology for assisting operators. (author). 8 ref
2002-01-01
The prototype module of LIBO, a linear accelerator project designed for cancer therapy, has passed its first proton-beam acceleration test. In parallel a new version - LIBO-30 - is being developed, which promises to open up even more interesting avenues.
International Nuclear Information System (INIS)
Spiro, Michel; Revol, Jean-Luc; Biarrotte, Jean-Luc; Napoly, Olivier; Jardin, Pascal; Chautard, Frederic; Thomas, Jean Charles; Petit, Eric
2016-09-01
The Accelerators meeting is organised every two years by the Accelerators division of the French Society of Physics (SFP). It brings together about 50 participants during a one-day meeting. The morning sessions are devoted to scientific presentations while the afternoon is dedicated to technical visits of facilities. This document brings together the available presentations (slides): 1 - Presentation of the Ganil - Grand accelerateur national d'ions lourds/Big national heavy-ion accelerator, Caen (Jardin, Pascal); 2 - Presentation of the Accelerators division of the French Society of Physics (Revol, Jean-Luc); 3 - Forward-looking and Prospective view (Napoly, Olivier); 4 - Accelerators at the National Institute of Nuclear and particle physics, situation, Forward-looking and Prospective view (Biarrotte, Jean-Luc); 5 - GANIL-SPIRAL2, missions and goals (Thomas, Jean Charles); 6 - The SPIRAL2 project (Petit, Eric)
Directory of Open Access Journals (Sweden)
Mª Beatriz Pérez Cabello de Alba
2011-10-01
Full Text Available Dentro del Modelo Léxico-Construccional (MLC, una plantilla léxica (PL es una meta-entrada que codifica los rasgos sintácticos, semánticos y pragmáticos o de registro relevantes para un predicado, y constituye uno de los pivotes centrales del MLC, puesto que a partir de ella se desarrolla el resto de niveles de significado contemplados en este modelo: pragmático, ilocutivo y discursivo. El objetivo de este trabajo es establecer el protocolo para la elaboración de estas plantillas; es decir, detallar qué tipo de elementos componen el módulo sintáctico, el semántico y el pragmático/registro de cada PL. Por otro lado, también se presentan dos herramientas computacionales que ayudan al lingüista en la creación de las plantillas, garantizando que éstas sean sintácticamente correctas, a la vez que permiten su almacenamiento en una base de datos, a la que se accede mediante una interfaz de usuario que facilita consultar y gestionar su contenido.Within the Lexical Constructional Model (LCM, a lexical template (LT is a meta-entry that codifies the relevant syntactic, semantic, and pragmatic or register features of a predicate. A LT is one of the core elements in the LCM, since the other facets of meaning construction considered by this proposal (cf. traditional implicature, illocutionary meaning and discourse coherence take templates as their starting point. Therefore, the aim of this paper is to establish the protocol for the creation of such templates, that is, we detail which elements make up the syntactic, semantic and pragmatic/register modules of each LT. Besides, two computational tools are presented. These tools help the linguist in the production of the LTs, assuring they are syntactically correct, as well as allowing us to store them in a database accessible by a user interface that facilitates querying and managing its contents.
Acceleration of radioactive ions
International Nuclear Information System (INIS)
Laxdal, R.E.
2003-01-01
There is an intense interest world-wide in the use of radioactive ion beams (RIBs) for experiment. In many existing or proposed facilities ions are produced or collected at source potential, ionized and re-accelerated. Within the past year three new ISOL based facilities have added dedicated post-accelerators to deliver accelerated RIBs to experiment. The paper gives an overview of RIB accelerators present and future, and explores the inherent features in the various acceleration methods with an emphasis on heavy ion linacs. The ISAC-I and ISAC-II post-accelerators are discussed as examples. Commissioning results and initial operating experience with ISAC-I will be presented
International Nuclear Information System (INIS)
Fernow, R.C.
1995-07-01
Far fields are propagating electromagnetic waves far from their source, boundary surfaces, and free charges. The general principles governing the acceleration of charged particles by far fields are reviewed. A survey of proposed field configurations is given. The two most important schemes, Inverse Cerenkov acceleration and Inverse free electron laser acceleration, are discussed in detail
Accelerating field step-up transformer in wake-field accelerators
International Nuclear Information System (INIS)
Chojnacki, E.; Gai, W.; Schoessow, P.; Simpson, J.
1991-01-01
In the wake-field scheme of particle acceleration, a short, intense drive bunch of electrons passes through a slow-wave structure, leaving behind high rf power in its wake field. The axial accelerating electric field associated with the rf can be quite large, > 100 MeV/m, and is used to accelerate a much less intense ''witness'' beam to eventual energies > 1 TeV. The rf power is deposited predominantly in the fundamental mode of the structure, which, for dielectric-lined waveguide as used at Argonne, is the TM 01 mode. In all likelihood on the field amplitude will be limited only by rf breakdown of the dielectric material, the limit of which is currently unknown in the short time duration, high frequency regime of wake-field acceleration operation. To obtain such strong electric fields with given wake-field rf power, the dimensions of the dielectric-lined waveguide have to be fairly small, OD of the order of a cm and ID of a few mm, and this gives rise to the generation of strong deflection modes with beam misalignment. While a scheme exists to damp such deflection modes on a bunch-to-bunch time scale, head-tail beam deflection could still be a problem and BNS damping as well as FODO focusing are incomplete cures. Presented here are details of a scheme by which the rf power is generated by in a large-diameter wake-field tube, where deflection mode generation by the intense drive beam is tolerable, and then fed into a small-diameter acceleration tube where the less intense witness beam is accelerated by the greatly enhanced axial electric field. The witness beam generates little deflection-mode power itself, even in the small acceleration tube, thus a final high-quality, high-energy electron beam is produced
International Nuclear Information System (INIS)
Schneider, J. David
1996-01-01
The proposed accelerator production of tritium (APT) project requires an accelerator that provides a cw proton beam of 100 m A at 1300 MeV. Since the majority of the technical risk of a high-current cw (continuous-wave, 100% DF) accelerator resides in the low-energy section, Los Alamos is building a 20 MeV duplicate of the accelerator front end to confirm design codes, beam performance, and demonstrate operational reliability. We report on design details of this low-energy demonstration accelerator (LEDA) and discuss the integrated design of the full accelerator for the APT plant. LEDA's proton injector is under test and has produced more than 130 mA at 75 keV. Fabrication is proceeding on a 6.7- MeV, 8-meter-long RFQ, and detailed design is underway on coupled-cavity drift-tube linac (CCDTL) structures. In addition, detailed design and technology experiments are underway on medium-beta superconducting cavities to assess the feasibility of replacing the conventional (room-temperature copper) high-energy linac with a linac made of niobium superconducting RF cavities. (author)
Energy Technology Data Exchange (ETDEWEB)
Garcia Chavez, J. R.; Dorantes Rodriguez, R. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D. F. (Mexico)
1995-12-31
, balanceo de cargas en los circuitos secundarios, verificacion y mejoramiento del nivel de aislamiento electrico, incremento de la selectividad de encendido de instalacion de apagadores en las zonas cercanas a las ventanas y areas con mayor iluminacion natural. El segundo aspecto se refiere al calculo, diseno, construccion y monitoreo del funcionamiento de sistemas pasivos de enfriamiento. Los resultados obtenidos hasta ahora indican que se ha reducido el consumo de energia y mejorado las condiciones de confort ambiental de los usuarios del edificio de la biblioteca.
Energy Technology Data Exchange (ETDEWEB)
Garcia Chavez, J R; Dorantes Rodriguez, R [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D. F. (Mexico)
1996-12-31
, balanceo de cargas en los circuitos secundarios, verificacion y mejoramiento del nivel de aislamiento electrico, incremento de la selectividad de encendido de instalacion de apagadores en las zonas cercanas a las ventanas y areas con mayor iluminacion natural. El segundo aspecto se refiere al calculo, diseno, construccion y monitoreo del funcionamiento de sistemas pasivos de enfriamiento. Los resultados obtenidos hasta ahora indican que se ha reducido el consumo de energia y mejorado las condiciones de confort ambiental de los usuarios del edificio de la biblioteca.
Garcia-Ramirez, Jaime Antonio
En esta investigacion, se desarrollo un instrumento que permite medir percepciones relacionadas al contexto de constriccion del conocimiento cientifico. Se examinaron instrumentos existentes y se encontro que el VOSTS (Views on science, technology, and society), instrumento desarrollado empiricamente en Canada por Aikenhead, Ryan y Fleming, podia traducirse y validarse en el contexto cultural puertorriqueno. El instrumento es extenso, consta de 113 reactivos, cada uno con una premisa basica relacionada a la tematica ciencia, tecnologia y sociedad y un numero de alternativas relacionadas a la premisa que oscila entre siete y trece. Se delimito su utilizacion a los quince reactivos identificados por los autores como relacionados a la construccion social del conocimiento cientifico. Metodologicamente, se procedio a utilizar el modelo de adaptacion intercultural, que permite que el instrumento desarrollado satisfaga las dimensiones de equivalencia semantica, de contenido, tecnica, de criterio y conceptual, atemperado asi al instrumento original. Se cumplio con este proposito mediante la traduccion de la version original en ingles al espanol y viceversa. Se utilizaron comites para examinar la traduccion y la retro-traduccion del instrumento. Se realizo una prueba piloto con estudiantes universitarios de nuevo ingreso, utilizando el instrumento traducido para asegurar su intelegibilidad. La confiabilidad del instrumento se determino mediante la intervencion de un panel de expertos quienes clasificaron las distintas posiciones dentro de cada reactivo en: realista, con merito e ingenua; se transformaron estas opciones en valores numericos lo que permitio establecer una escala Likert para cada una. Se suministro el instrumento a una muestra de estudiantes universitarios de nuevo ingreso con caracteristicas similares a las de la poblacion puertorriquena en cuanto a ejecucion en las pruebas de aptitud verbal y matematica del College Board. Los resultados de sus contestaciones
Turner, Michael Stanley
2003-01-01
Using naturally occuring particles on which to research might have made accelerators become extinct. But in fact, results from astrophysics have made accelerator physics even more important. Not only are accelerators used in hospitals but they are also being used to understand nature's inner workings by searching for Higgs bosons, CP violation, neutrino mass and dark matter (2 pages)
Accelerator business in Japan expanding
International Nuclear Information System (INIS)
Anon.
1992-01-01
Accelerators have become to be used increasingly in Japan in such fields as medicine, physics research and industry. This has caused stiff competition for market share by the manufacturers of accelerators. Electron beam accelerators for industrial use provide an indispensable means for adding values to products, for example, electric cables with incombustible insulators. Linear accelerators for the nondestructive inspection of nuclear components have been widely installed at equipment manufacturing plants. Active efforts have been exerted to develop small synchrotron radiation accelerators for next generation electronic industry. Cyclotrons for producing short life radioisotopes for medical diagnosis and electron beam accelerators for radiation therapy are also used routinely. The suppliers of accelerators include the companies manufacturing heavy electric machinery, heavy machinery and the engineering division of steelmakers. Accelerator physics is being formed, but universities do not yet offer the course regarding accelerators. Accelerator use in Japan and the trend of accelerator manufacturers are reported. (K.I.)
Acceleration of a trailing positron bunch in a plasma wakefield accelerator
International Nuclear Information System (INIS)
Doche, A.; Beekman, C.; Corde, S.
2017-01-01
High gradients of energy gain and high energy efficiency are necessary parameters for compact, cost-efficient and high-energy particle colliders. Plasma Wakefield Accelerators (PWFA) offer both, making them attractive candidates for next-generation colliders. Here in these devices, a charge-density plasma wave is excited by an ultra-relativistic bunch of charged particles (the drive bunch). The energy in the wave can be extracted by a second bunch (the trailing bunch), as this bunch propagates in the wake of the drive bunch. While a trailing electron bunch was accelerated in a plasma with more than a gigaelectronvolt of energy gain, accelerating a trailing positron bunch in a plasma is much more challenging as the plasma response can be asymmetric for positrons and electrons. We report the demonstration of the energy gain by a distinct trailing positron bunch in a plasma wakefield accelerator, spanning nonlinear to quasi-linear regimes, and unveil the beam loading process underlying the accelerator energy efficiency. A positron bunch is used to drive the plasma wake in the experiment, though the quasi-linear wake structure could as easily be formed by an electron bunch or a laser driver. Finally, the results thus mark the first acceleration of a distinct positron bunch in plasma-based particle accelerators.
International Nuclear Information System (INIS)
Tuniz, C.
1997-01-01
Particle accelerators have been developed more than sixty years ago to investigate nuclear and atomic phenomena. A major shift toward applications of accelerators in the study of materials structure and composition in inter-disciplinary projects has been witnessed in the last two decades. The Australian Nuclear Science and Technology Organisation (ANSTO) has developed advanced research programs based on the use of particle and photon beams. Atmospheric pollution problems are investigated at the 3 MV Van de Graff accelerator using ion beam analysis techniques to detect toxic elements in aerosol particles. High temperature superconductor and semiconductor materials are characterised using the recoil of iodine and other heavy ions produced at ANTARES, the 10-MV Tandem accelerator. A heavy-ion microprobe is presently being developed at ANTARES to map elemental concentrations of specific elements with micro-size resolution. An Accelerator mass Spectrometry (AMS) system has been developed at ANSTO for the ultra-sensitive detection of Carbon-14, Iodine-129 and other long-lived radioisotopes. This AMS spectrometer is a key instrument for climate change studies and international safeguards. ANSTO is also managing the Australian Synchrotron Research program based on facilities developed at the Photon Factory (Japan) and at the Advanced Photon Source (USA). Advanced projects in biology, materials chemistry, structural condensed matter and other disciplines are being promoted by a consortium involving Australian universities and research institutions. This paper will review recent advances in the use of particle accelerators, with a particular emphasis on applications developed at ANSTO and related to problems of international concern, such as global environmental change, public health and nuclear proliferation
Kreiner, A J; Baldo, M; Bergueiro, J R; Cartelli, D; Castell, W; Thatar Vento, V; Gomez Asoia, J; Mercuri, D; Padulo, J; Suarez Sandin, J C; Erhardt, J; Kesque, J M; Valda, A A; Debray, M E; Somacal, H R; Igarzabal, M; Minsky, D M; Herrera, M S; Capoulat, M E; Gonzalez, S J; del Grosso, M F; Gagetti, L; Suarez Anzorena, M; Gun, M; Carranza, O
2014-06-01
The activity in accelerator development for accelerator-based BNCT (AB-BNCT) both worldwide and in Argentina is described. Projects in Russia, UK, Italy, Japan, Israel, and Argentina to develop AB-BNCT around different types of accelerators are briefly presented. In particular, the present status and recent progress of the Argentine project will be reviewed. The topics will cover: intense ion sources, accelerator tubes, transport of intense beams, beam diagnostics, the (9)Be(d,n) reaction as a possible neutron source, Beam Shaping Assemblies (BSA), a treatment room, and treatment planning in realistic cases. © 2013 Elsevier Ltd. All rights reserved.
Energy Technology Data Exchange (ETDEWEB)
Barbalat, Oscar
1989-12-15
Originally developed as tools for frontier physics, particle accelerators provide valuable spinoff benefits in applied research and technology. These accelerator applications are the subject of a biennial meeting in Denton, Texas, but the increasing activity in this field resulted this year (5-9 September) in the first European Conference on Accelerators in Applied Research and Technology, organized by K. Bethge of Frankfurt's Goethe University. The meeting reflected a wide range of applications - ion beam analysis, exploitation of nuclear microbeams, accelerator mass spectrometry, applications of photonuclear reactions, ion beam processing, synchrotron radiation for semiconductor technology, specialized technology.
International Nuclear Information System (INIS)
Barbalat, Oscar
1989-01-01
Originally developed as tools for frontier physics, particle accelerators provide valuable spinoff benefits in applied research and technology. These accelerator applications are the subject of a biennial meeting in Denton, Texas, but the increasing activity in this field resulted this year (5-9 September) in the first European Conference on Accelerators in Applied Research and Technology, organized by K. Bethge of Frankfurt's Goethe University. The meeting reflected a wide range of applications - ion beam analysis, exploitation of nuclear microbeams, accelerator mass spectrometry, applications of photonuclear reactions, ion beam processing, synchrotron radiation for semiconductor technology, specialized technology
Studies of accelerated compact toruses
International Nuclear Information System (INIS)
Hartman, C.W.; Eddleman, J.; Hammer, J.H.
1983-01-01
In an earlier publication we considered acceleration of plasma rings (Compact Torus). Several possible accelerator configurations were suggested and the possibility of focusing the accelerated rings was discussed. In this paper we consider one scheme, acceleration of a ring between coaxial electrodes by a B/sub theta/ field as in a coaxial rail-gun. If the electrodes are conical, a ring accelerated towards the apex of the cone undergoes self-similar compression (focusing) during acceleration. Because the allowable acceleration force, F/sub a/ = kappaU/sub m//R where (kappa - 2 , the accelerating distance for conical electrodes is considerably shortened over that required for coaxial electrodes. In either case, however, since the accelerating flux can expand as the ring moves, most of the accelerating field energy can be converted into kinetic energy of the ring leading to high efficiency
Plasma-based and novel accelerators
International Nuclear Information System (INIS)
Sugihara, Ryo; Nishida, Yasushi
1992-05-01
This publication is a collection of papers presented at Workshop on Plasma-Based and Novel Accelerators held at National Institute for Fusion Science, Nagoya, on December 19-20, 1991. Plasma-based accelerators are attracting considerable attention in these days a new, exciting field of plasma applications. The study gives rise to and spurs study of other unique accelerators like laser-based accelerators. The talks in the Workshop encompassed beat-wave accelerator (BWA), plasma wake field accelerator (PWFA), V p x B accelerator, laser-based accelerators and some novel methods of acceleration. They also covered the topics such as FEL, cluster acceleration and plasma lens. Small scale experiments as those in universities have exhibited brilliant results while larger scale experiments like BWA in Institute of Laser Engineering, Osaka University, and PWFA in KEK start showing significant results as well. (J.P.N.)
Diagnostics for induction accelerators
International Nuclear Information System (INIS)
Fessenden, T.J.
1996-04-01
The induction accelerator was conceived by N. C. Christofilos and first realized as the Astron accelerator that operated at LLNL from the early 1960's to the end of 1975. This accelerator generated electron beams at energies near 6 MeV with typical currents of 600 Amperes in 400 ns pulses. The Advanced Test Accelerator (ATA) built at Livermore's Site 300 produced 10,000 Ampere beams with pulse widths of 70 ns at energies approaching 50 MeV. Several other electron and ion induction accelerators have been fabricated at LLNL and LBNL. This paper reviews the principal diagnostics developed through efforts by scientists at both laboratories for measuring the current, position, energy, and emittance of beams generated by these high current, short pulse accelerators. Many of these diagnostics are closely related to those developed for other accelerators. However, the very fast and intense current pulses often require special diagnostic techniques and considerations. The physics and design of the more unique diagnostics developed for electron induction accelerators are presented and discussed in detail
International Nuclear Information System (INIS)
Armstrong, D.D.
1983-01-01
A 35-MeV 100-mA cw linear accelerator is being designed by Los Alamos for use in the Fusion Materials Irradiation Test (FMIT) Facility. Essential to this program is the design, construction, and evaluation of performance of the accelerator's injector, low-energy beam transport, and radio-frequency quadrupole sections before they are shipped to the facility site. The installation and testing of some of these sections have begun as well as the testing of the rf, noninterceptive beam diagnostics, computer control, dc power, and vacuum systems. An overview of the accelerator systems and the performance to date is given
Accelerators of future generation
International Nuclear Information System (INIS)
Kolomenskij, A.A.
1983-01-01
A brief review of the prospects of development of various of types accelerator over next 10 to 15 years is given. The following directions are considered: superhign energy proton accelerators and storage rings, electron-positron colliding beams, heavy ion accelerators, medium energy, high-current proton accelerators superhigh power particle beams (electrons light- and heavy ions) for inertial fusion
Plasma-based accelerator structures
International Nuclear Information System (INIS)
Schroeder, Carl B.
1999-01-01
Plasma-based accelerators have the ability to sustain extremely large accelerating gradients, with possible high-energy physics applications. This dissertation further develops the theory of plasma-based accelerators by addressing three topics: the performance of a hollow plasma channel as an accelerating structure, the generation of ultrashort electron bunches, and the propagation of laser pulses is underdense plasmas
Recent progress in particle accelerators
International Nuclear Information System (INIS)
Cole, F.T.; Mills, F.E.
1988-01-01
Many accelerators have also been built for medical radiography and therapy. Electron accelerators for this application are available commercially, using the electrons directly or bremsstrahlung photons. Neutrons produced by accelerator beams have also been used for therapy with considerable success, and several proton accelerators built for physics research have been adapted for direct therapy with protons. The first proton accelerator specifically for therapy is now being built. Separate from what might be called conventional accelerator technology, an entirely new field utilizing very highly pulsed power has been developed, and beams of short pulses of thousands or millions of amperes peak current in the MeV energy range are now available. These beams have important applications in high-energy particle acceleration, controlled fusion, industrial treatment of materials, and possibly in food preservation. All of these accelerators make use of external fields of acceleration. There is also vigorous research into new methods of acceleration, in many schemes making use of the intense accelerating fields, generated by laser beams or by plasma states of matter. This research has not as yet made traditional kinds of accelerators outmoded, but many workers hope that early in the next century there will be practical new acceleration methods making use of these very high fields. These developments are discussed in detail
Plasma-focused cyclic accelerators
International Nuclear Information System (INIS)
Mondelli, A.A.; Chernin, D.P.
1985-01-01
The use of ambient plasma to neutralize the transverse forces of an intense particle beam has been known for many years. Most recently, the so-called ion-focused regime (IFR) for beam propagation has been used as a means of focusing intense electron beams in linear accelerators and suggested for injecting an electron beam across magnetic field lines into a high-current cyclic accelerator. One technique for generating the required background plasma for IFR propagation is to use a laser to ionize ambient gas in the accelerator chamber. This paper discusses an alternative means of plasma production for IFR, viz. by using RF breakdown. For this approach the accelerator chamber acts as a waveguide. This technique is not limited to toroidal accelerators. It may be applied to any accelerator or recirculator geometry as well as for beam steering and for injection or extraction of beams in closed accelerator configurations
Acceleration of polarized protons in the IHEP accelerator complex
International Nuclear Information System (INIS)
Anferov, V.A.; Ado, Yu.M.; Shoumkin, D.
1995-01-01
The paper considers possibility to accelerate polarized beam in the IHEP accelerator complex (including first stage of the UNK). The scheme of preserving beam polarization is described for all acceleration stages up to 400 GeV beam energy. Polarization and intensity of the polarized proton beam are estimated. The suggested scheme includes using two Siberian snakes in opposite straight sections of the UNK-1, where each snake consists of five dipole magnets. In the U-70 it is suggested to use one helical Siberian snake, which is turned on adiabatically at 10 GeV, and four pulsed quadrupoles. To incorporate the snake into the accelerator lattice it is proposed to make modification of one superperiod. This would make a 13 m long straight section. Spin depolarization in the Booster is avoided by decreasing the extraction energy to 0.9 GeV. Then no additional hardware is required in the Booster
Energy Technology Data Exchange (ETDEWEB)
Gutierrez Castro, Lucia Monica; Quinto Diez, Pedro [Escuela Superior de Ingenieria Mecanica y Electrica, Instituto Politecnico Nacional, Mexico, D.F. (Mexico)]. E-mail: moni-80-lgc@hotmail.com; pqd510@hotmail.com; Tovar Galvez, Luis Raul [Centro Interdisciplinario de Investigaciones de Estudios sobre Medio Ambiente y Desarrollo, Instituto Politecnico Nacional, Mexico, D.F. (Mexico)]. E-mail: ltovarg@ipn.mx
2010-11-15
In this paper a Solar System of Heating Water (SSHW) to provide energy to a biodigester which produces biogas located in the Interdisciplinary Center of Investigation of Studies About Environment and Development (CIIEMAD) is assessed. This evaluation is made by means of the f Method considerating the extraterrestrial radiation, the earth radiation in the zone and the necessary energy to maintain at 55 degrees Celsius the mixture inside the biodigester. The data were introduced in the SOLAR program to calculate both the harnessing area m{sup 2} and the storage capacity in L/m{sup 2}. To guarantee the good performance of the SSHW, a control and monitoring system for the temperature of the mix inside the biodigester is proposed. It also controls the input and output temperature to the solar collectors, as well as the cost analysis which shows the savings of fuel of the SSHW with a conventional system to heating water. [Spanish] En este articulo se evalua un sistema solar de calentamiento de agua (SSCA) para proveer energia a un biodigestor que forma parte del sistema de generacion de biogas (SGB) ubicado en el Centro Interdisciplinario de Investigaciones de Estudios sobre Medio Ambiente y Desarrollo (CIIEMAD). Dicha evaluacion se realiza por medio del Metodo f de diseno que considera datos de radiacion terrestre, radiacion extraterrestre sobre la zona y la energia necesaria para mantener la temperatura de la mezcla dentro del biodigestor a 55 grados centigrados. Los datos fueron introducidos en el programa SOLAR para el calculo del area de captacion en m{sup 2} y la capacidad de almacenamiento en L/m{sup 2}. Para garantizar el buen funcionamiento del SSCA se propone un sistema de control y monitoreo de la temperatura de la mezcla dentro del biodigestor. Tambien se controla la temperatura de entrada y salida a los colectores solares, asi como el analisis de costos que muestra el ahorro de combustible del SSCA con un sistema convencional de calentamiento de agua.
Directory of Open Access Journals (Sweden)
Rafael Reyes Ruiz
2005-12-01
Full Text Available From a Visual Anthropology perspective, this article discusses how the structural arrangements of a European theme park in Japan mediated by photographic technologies facilitate an entertainment experience that reinforces the Eurocentric orientation of Japanese internationalization.
An Examination of Resonance, Acceleration, and Particle Dynamics in the Micro-Accelerator Platform
International Nuclear Information System (INIS)
McNeur, Josh; Rosenzweig, J. B.; Travish, G.; Zhou, J.; Yoder, R.
2010-01-01
An effort to build a micron-scale dielectric-based slab-symmetric accelerator is underway at UCLA. The structure achieves acceleration via a resonant accelerating mode that is excited in an approximately 800 nm wide vacuum gap by a side coupled 800 nm laser. Detailed simulation results on structure fields and particle dynamics, using HFSS and VORPAL, are presented. We examine the quality factors of the accelerating modes for various structures and the excitations of non-accelerating destructive modes. Additionally, the results of an analytic and computational study of focusing, longitudinal dynamics and acceleration are described. Methods for achieving simultaneous transverse and longitudinal focusing are discussed, including modification of structure dimensions and slow variation of the coupling periodicity.
Grisham, Larry R
2013-12-17
The present invention provides systems and methods for the magnetic insulation of accelerator electrodes in electrostatic accelerators. Advantageously, the systems and methods of the present invention improve the practically obtainable performance of these electrostatic accelerators by addressing, among other things, voltage holding problems and conditioning issues. The problems and issues are addressed by flowing electric currents along these accelerator electrodes to produce magnetic fields that envelope the accelerator electrodes and their support structures, so as to prevent very low energy electrons from leaving the surfaces of the accelerator electrodes and subsequently picking up energy from the surrounding electric field. In various applications, this magnetic insulation must only produce modest gains in voltage holding capability to represent a significant achievement.
Results from the RACE [Ring ACceleration Experiment] Compact Torus Acceleration Experiment
International Nuclear Information System (INIS)
Hammer, J.H.; Hartman, C.W.; Eddleman, J.L.; Kusse, B.
1987-06-01
RACE (Ring ACceleration Experiment) is a proof-of-principle experiment aimed at demonstrating acceleration of magnetically confined compact torus plasma rings to directed kinetic energies well in excess of their magnetic and thermal energies. In the course of the first year of operation the following have been observed: successful formation of rings in the RACE geometry; acceleration of rings with large forces, F/sub accelerate/ ∼F/sub equilibrium/ without apparent degradation of the ring structure; peak velocities of ≅2.5 x 10 8 cm/sec; acceleration efficiency of >30% at speeds of 1.5 x 10 8 cm/sec inferred from trajectory and capacitor bank data; kinetic to magnetic energy ratios ∼10 were observed. Experiments in the near future will be aimed at confirmation of the mass/energy measurements by calorimetry and direct density measurements
Industrial Application of Accelerators
CERN. Geneva
2017-01-01
At CERN, we are very familiar with large, high energy particle accelerators. However, in the world outside CERN, there are more than 35000 accelerators which are used for applications ranging from treating cancer, through making better electronics to removing harmful micro-organisms from food and water. These are responsible for around $0.5T of commerce each year. Almost all are less than 20 MeV and most use accelerator types that are somewhat different from what is at CERN. These lectures will describe some of the most common applications, some of the newer applications in development and the accelerator technology used for them. It will also show examples of where technology developed for particle physics is now being studied for these applications. Rob Edgecock is a Professor of Accelerator Science, with a particular interest in the medical applications of accelerators. He works jointly for the STFC Rutherford Appleton Laboratory and the International Institute for Accelerator Applications at the Univer...
Industrial Application of Accelerators
CERN. Geneva
2017-01-01
At CERN, we are very familiar with large, high energy particle accelerators. However, in the world outside CERN, there are more than 35000 accelerators which are used for applications ranging from treating cancer, through making better electronics to removing harmful micro-organisms from food and water. These are responsible for around $0.5T of commerce each year. Almost all are less than 20 MeV and most use accelerator types that are somewhat different from what is at CERN. These lectures will describe some of the most common applications, some of the newer applications in development and the accelerator technology used for them. It will also show examples of where technology developed for particle physics is now being studied for these applications. Rob Edgecock is a Professor of Accelerator Science, with a particular interest in the medical applications of accelerators. He works jointly for the STFC Rutherford Appleton Laboratory and the International Institute for Accelerator Applications at the Uni...
Analysis of FFAG accelerators and the evolution of circular accelerators
International Nuclear Information System (INIS)
Laslett, J.
1961-01-01
After rapidly comparing circular machines with the linear accelerator and the reasons for the choice of an annular high energy and very high intensity accelerator, recent problems concerning accelerator theory are discussed, with emphasis on their physical character. The FFAG principle. The limit of the energy of FFAG cyclotron. The setting-up and interpreting of mean energy of focusing terms for a spiral FFAG synchrotron. The limiting amplitude stable near the non-linear resonance 2Q z = Q r , as well as the linear coupling resonance of Walkinshaw 2Q z = Q r . The crossed-beam accelerator. The 40 MeV electron model of MURA. Two other parts deal with linear and non-linear methods of injection and extraction using a variable disturbance applied to the magnetic field, as well as to collective effects. The interaction of the beam with the accelerating cavities and the walls. The modification of the phase oscillation equation. The influence of the beams' high frequency fields on the Nielsen longitudinal instability. (author) [fr
Diagnostics for induction accelerators
International Nuclear Information System (INIS)
Fessenden, T.J.
1997-01-01
The induction accelerator was conceived by N. C. Christofilos and first realized as the Astron accelerator that operated at Lawrence Livermore National Laboratory (LLNL) from the early 1960s to the end of 1975. This accelerator generated electron beams at energies near 6 MeV with typical currents of 600 Amperes in 400-ns pulses. The Advanced Test Accelerator (ATA) built at Livermore close-quote s Site 300 produced 10,000-Ampere beams with pulse widths of 70 ns at energies approaching 50 MeV. Several other electron and ion induction accelerators have been fabricated at LLNL and Lawrence Berkeley National Laboratory (LBNL). This paper reviews the principal diagnostics developed through efforts by scientists at both laboratories for measuring the current, position, energy, and emittance of beams generated by these high-current, short-pulse accelerators. Many of these diagnostics are closely related to those developed for other accelerators. However, the very fast and intense current pulses often require special diagnostic techniques and considerations. The physics and design of the more unique diagnostics developed for electron induction accelerators are presented and discussed in detail. copyright 1997 American Institute of Physics
Accelerators of atomic particles
International Nuclear Information System (INIS)
Sarancev, V.
1975-01-01
A brief survey is presented of accelerators and methods of accelerating elementary particles. The principle of collective accelerating of elementary particles is clarified and the problems are discussed of its realization. (B.S.)
International Nuclear Information System (INIS)
Tajima, T.
2008-01-01
This note intends to motivate our effort toward the advent of new methods of particle acceleration, utilizing the fast rising laser technology. By illustrating the underlying principles in an intuitive manner and thus less jargon-clad fashion, we seek a direction in which we shall be able to properly control and harness the promise of laser acceleration. First we review the idea behind the laser wakefield. We then go on to examine ion acceleration by laser. We examine the sheath acceleration in particular and look for the future direction that allows orderly acceleration of ions in high energies
International Nuclear Information System (INIS)
Mazarakis, M.G.; Smith, D.L.; Puokey, J.W.; Bennett, L.F.; Wagner, J.S.; Olson, W.R.; George, M.; Turman, B.N.; Prestwich, K.R.; Struve, K.W.
1992-01-01
The focusing and transport of intense relativistic electron beams in the Sandia Laboratories Recirculating Linear Accelerator (RLA) is accomplished with the aid of an ion focusing channel (IFR). We report here experiments evaluating the beam generation in the injector and its subsequent acceleration and transport through the first post-accelerating cavity. Two injectors and one type of post-accelerating cavity were studied. Beams of 6-20 kA current were injected and successfully transported and accelerated through the cavity. The transport efficiencies were 90% - 100%, and the beam Gaussian profile (4 MeV injector) and radius (5 mm) remained the same through acceleration. We describe the RLA, present the experimental results and compare them with numerical simulations. (Author) 3 refs., 7 figs
Nuclear physics accelerator facilities
International Nuclear Information System (INIS)
1988-12-01
This paper describes many of the nuclear physics heavy-ion accelerator facilities in the US and the research programs being conducted. The accelerators described are: Argonne National Laboratory--ATLAS; Brookhaven National Laboratory--Tandem/AGS Heavy Ion Facility; Brookhaven National Laboratory--Relativistic Heavy Ion Collider (RHIC) (Proposed); Continuous Electron Beam Accelerator Facility; Lawrence Berkeley Laboratory--Bevalac; Lawrence Berkeley Laboratory--88-Inch Cyclotron; Los Alamos National Laboratory--Clinton P. Anderson Meson Physics Facility (LAMPF); Massachusetts Institute of Technology--Bates Linear Accelerator Center; Oak Ridge National Laboratory--Holifield Heavy Ion Research Facility; Oak Ridge National Laboratory--Oak Ridge Electron Linear Accelerator; Stanford Linear Accelerator Center--Nuclear Physics Injector; Texas AandM University--Texas AandM Cyclotron; Triangle Universities Nuclear Laboratory (TUNL); University of Washington--Tandem/Superconducting Booster; and Yale University--Tandem Van de Graaff
Energy Technology Data Exchange (ETDEWEB)
Arriola Medellin, Alejandro M.; Huante Perez, Liborio; Rodriguez Martinez, J. Hugo; Alcaraz Calderon, A. Moises [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: aarriola@iie.org.mx; lhp@iie.org.mx; jhrm@iie.org.mx; malcaraz@iie.org.mx
2010-11-15
In this paper the thermal integration of an existing ammonia plant is evaluated using the Pinch Analysis tools. It is shown the design criteria that would have to fulfill the heat recovery network to take advantage of process streams thermal potentials. It was identified the heat recovery equipment that induces energy losses by incorrect streams selection, and the economic implications. [Spanish] En este trabajo se evalua la integracion termica de una planta existente de amoniaco usando las herramientas del analisis Pinch. Se muestran los criterios de diseno que deberian de cumplir las redes de recuperacion de calor, para aprovechar al maximo el potencial termico de las corrientes del proceso. Tomando como base dichos criterios se analizo el diseno la red de recuperacion de calor de la planta existente, identificando los equipos de recuperacion de calor que generan perdidas de calor por la seleccion incorrecta de las corrientes. Se estiman las perdidas economicas derivadas del diseno ineficiente de la red.
Project of renewable energy for agriculture; Proyecto de energia renovable para la agricultura
Energy Technology Data Exchange (ETDEWEB)
Montufar Avilez, Octavio [FIRCO (Mexico)
2005-07-01
The document presents a general design of the hydraulic system, a hydraulic design of cattle ranch and a hydraulic design by dripping. It also discusses the components of the energy project, which are: institutional fortification, promotion and diffusion, market development (studies), specifications and certification, investments, technical support and direction of the project. The objective of this project is to diminish ignorance in the sector, to reduce the investment costs and to obtain a long term-sustainable effect. [Spanish] En este documento se describe un diseno general del sistema hidraulico, un diseno hidraulico de ganaderia, un diseno hidraulico por goteo y los componentes del proyecto de energia que son: fortalecimiento institucional, promocion y difusion, desarrollo del mercado (estudios), especificaciones y certificacion, inversiones, asistencia tecnica y direccion del proyecto. El objetivo de este proyecto es minimizar el desconocimiento en el sector, reducir los costos de inversion y que el efecto sea sostenible a largo plazo.
Staging of RF-accelerating Units in a MEMS-based Ion Accelerator
Persaud, A.; Seidl, P. A.; Ji, Q.; Feinberg, E.; Waldron, W. L.; Schenkel, T.; Ardanuc, S.; Vinayakumar, K. B.; Lal, A.
Multiple Electrostatic Quadrupole Array Linear Accelerators (MEQALACs) provide an opportunity to realize compact radio- frequency (RF) accelerator structures that can deliver very high beam currents. MEQALACs have been previously realized with acceleration gap distances and beam aperture sizes of the order of centimeters. Through advances in Micro-Electro-Mechanical Systems (MEMS) fabrication, MEQALACs can now be scaled down to the sub-millimeter regime and batch processed on wafer substrates. In this paper we show first results from using three RF stages in a compact MEMS-based ion accelerator. The results presented show proof-of-concept with accelerator structures formed from printed circuit boards using a 3 × 3 beamlet arrangement and noble gas ions at 10 keV. We present a simple model to describe the measured results. We also discuss some of the scaling behaviour of a compact MEQALAC. The MEMS-based approach enables a low-cost, highly versatile accelerator covering a wide range of currents (10 μA to 100 mA) and beam energies (100 keV to several MeV). Applications include ion-beam analysis, mass spectrometry, materials processing, and at very high beam powers, plasma heating.
Energy Technology Data Exchange (ETDEWEB)
Caldwell, Allen [Max-Planck-Institut fuer Physik, Muenchen (Germany)
2015-05-01
The concept of laser-induced plasma wakefields as a technique to accelerate charged particles was introduced 35 years ago as a means to go beyond the accelerating gradients possible with metallic cavities supporting radio frequency electromagnetic fields. Significant developments in laser technology have made possible the pulse intensity needed to realize this concept, and rapid progress is now underway in the realization of laser-driven plasma wakefield acceleration. It has also been realized that similar accelerating gradients can be produced by particle beams propagating in plasmas, and experimental programs have also been undertaken to study this possibility. Positive results have been achieved with electron-driven plasma wakefields, and a demonstration experiment with proton-driven wakefields is under construction at CERN. The concepts behind these different schemes and their pros and cons are described, as well as the experimental results achieved. An outlook for future practical uses of plasma based accelerators will also be given.
International Nuclear Information System (INIS)
Briggs, R.J.
1986-06-01
The development of linear induction accelerators has been motivated by applications requiring high-pulsed currents of charged particles at voltages exceeding the capability of single-stage, diode-type accelerators and at currents too high for rf accelerators. In principle, one can accelerate charged particles to arbitrarily high voltages using a multi-stage induction machine, but the 50-MeV, 10-kA Advanced Test Accelerator (ATA) at LLNL is the highest voltage machine in existence at this time. The advent of magnetic pulse power systems makes sustained operation at high-repetition rates practical, and this capability for high-average power is very likely to open up many new applications of induction machines in the future. This paper surveys the US induction linac technology with primary emphasis on electron machines. A simplified description of how induction machines couple energy to the electron beam is given, to illustrate many of the general issues that bound the design space of induction linacs
Accelerator for medical applications and electron acceleration by laser plasma
International Nuclear Information System (INIS)
Hosokai, Tomonao; Uesaka, Mitsuru
2006-01-01
In this article, the current status of radiation therapies in Japan and updated medical accelerators are reviewed. For medical use, there is a strong demand of a compact and flexible accelerator. At present, however, we have only two choices of the S-band linac with one or two rotation axis combined with the multi leaf collimator, or the X-band linac with a rather flexible robotic arm. In addition, the laser plasma cathode that is the second generation of the laser wake-field accelerator (LWFA) is studied as a high-quality electron source for medical use though it is still at the stage of the basic research. The potential of LWFA as medical accelerator near future is discussed based on updated results of laser plasma cathode experiment in Univ. of Tokyo. (author)
International Nuclear Information System (INIS)
Anon.
1994-01-01
The CERN Accelerator School (CAS) recently held its Advanced Accelerator Physics course in Greece on the island of Rhodes. Complementing the general course in Finland last year, this course was organized together with the University of Athens and NCSR. Demokritos. Accelerator specialists from Europe, CIS, Japan and USA followed two weeks of ''state-of-theart'' lectures designed to complete their education in the field
International Nuclear Information System (INIS)
BERG, J.S.; GARREN, A.A.; JOHNSTONE, C.
2000-01-01
This paper compares various types of recirculating accelerators, outlining the advantages and disadvantages of various approaches. The accelerators are characterized according to the types of arcs they use: whether there is a single arc for the entire recirculator or there are multiple arcs, and whether the arc(s) are isochronous or non-isochronous
Energy Technology Data Exchange (ETDEWEB)
Elizondo-Decanini, Juan M.
2017-08-29
A compact particle accelerator having an input portion configured to receive power to produce particles for acceleration, where the input portion includes a switch, is provided. In a general embodiment, a vacuum tube receives particles produced from the input portion at a first end, and a plurality of wafer stacks are positioned serially along the vacuum tube. Each of the plurality of wafer stacks include a dielectric and metal-oxide pair, wherein each of the plurality of wafer stacks further accelerate the particles in the vacuum tube. A beam shaper coupled to a second end of the vacuum tube shapes the particles accelerated by the plurality of wafer stacks into a beam and an output portion outputs the beam.
Traveling wave linear accelerator with RF power flow outside of accelerating cavities
Dolgashev, Valery A.
2016-06-28
A high power RF traveling wave accelerator structure includes a symmetric RF feed, an input matching cell coupled to the symmetric RF feed, a sequence of regular accelerating cavities coupled to the input matching cell at an input beam pipe end of the sequence, one or more waveguides parallel to and coupled to the sequence of regular accelerating cavities, an output matching cell coupled to the sequence of regular accelerating cavities at an output beam pipe end of the sequence, and output waveguide circuit or RF loads coupled to the output matching cell. Each of the regular accelerating cavities has a nose cone that cuts off field propagating into the beam pipe and therefore all power flows in a traveling wave along the structure in the waveguide.
International Nuclear Information System (INIS)
Esarey, E.; Ting, A.; Sprangle, P.
1989-01-01
The laser wakefield accelerator (LWFA) is a novel plasma based electron acceleration scheme which utilizes a relativistic optical guiding mechanism for laser pulse propagation. In the LWFA, a short, high power, single frequency laser pulse is propagated through a plasma. As the laser pulse propagates, its radial and axial ponderomotive forces nonresonantly generate large amplitude plasma waves (wakefields) with a phase velocity equal to the group velocity of the pulse. A properly phased electron bunch may then be accelerated by the axial wakefield and focused by the transverse wakefield. Optical guiding of the laser pulse in the plasma is necessary in order to achieve high energies in a single stage of acceleration. At sufficiently high laser powers, optical guiding may be achieved through relativistic effects associated with the plasma electrons. Preliminary analysis indicates that this scheme may overcome some of the difficulties present in the plasma beat wave accelerator and in the plasma wakefield accelerator. Analytical and numerical calculations are presented which study both laser pulse propagation within a plasma as well as the subsequent generation of large amplitude plasma waves. In addition, the generation of large amplitude plasma waves in regimes where the plasma waves become highly nonlinear is examined
High Gradient Accelerator Research
International Nuclear Information System (INIS)
Temkin, Richard
2016-01-01
The goal of the MIT program of research on high gradient acceleration is the development of advanced acceleration concepts that lead to a practical and affordable next generation linear collider at the TeV energy level. Other applications, which are more near-term, include accelerators for materials processing; medicine; defense; mining; security; and inspection. The specific goals of the MIT program are: • Pioneering theoretical research on advanced structures for high gradient acceleration, including photonic structures and metamaterial structures; evaluation of the wakefields in these advanced structures • Experimental research to demonstrate the properties of advanced structures both in low-power microwave cold test and high-power, high-gradient test at megawatt power levels • Experimental research on microwave breakdown at high gradient including studies of breakdown phenomena induced by RF electric fields and RF magnetic fields; development of new diagnostics of the breakdown process • Theoretical research on the physics and engineering features of RF vacuum breakdown • Maintaining and improving the Haimson / MIT 17 GHz accelerator, the highest frequency operational accelerator in the world, a unique facility for accelerator research • Providing the Haimson / MIT 17 GHz accelerator facility as a facility for outside users • Active participation in the US DOE program of High Gradient Collaboration, including joint work with SLAC and with Los Alamos National Laboratory; participation of MIT students in research at the national laboratories • Training the next generation of Ph. D. students in the field of accelerator physics.
Acceleration of polarized proton beams
International Nuclear Information System (INIS)
Roser, T.
1998-01-01
The acceleration of polarized beams in circular accelerators is complicated by the numerous depolarizing spin resonances. Using a partial Siberian snake and a rf dipole that ensure stable adiabatic spin motion during acceleration has made it possible to accelerate polarized protons to 25 GeV at the Brookhaven AGS. Full Siberian snakes are being developed for RHIC to make the acceleration of polarized protons to 250 GeV possible. A similar scheme is being studied for the 800 GeV HERA proton accelerator
Electron accelerators for environmental protection
International Nuclear Information System (INIS)
Zimek, Z.
1998-01-01
The primary objective of this publication is to provide information suitable for electron accelerators implementation in facilities applying radiation technology for environmental protection. It should be noticed that radiation processing has been successfully used in the fields of crosslinking polymer curing and medical products sterilization for more than 40 years. Practical application of radiation technology today extends on SO 2 and NO x removal from the flue gas (one of major power intensive radiation processing), destruction and removal of organic chemicals from water, decreasing bacteria content in the irradiated sludge and waste water. On the other hand the increased awareness of environmental pollution hazards and more stringent waste regulations in many countries may open stronger support for environmentally oriented technologies. This publication provides an evaluation of electron accelerators capabilities in respect of environmental applications where technological and economical criteria are now well defined. In order to determine the potential of electron accelerators, the literature data were examined as well visits and meetings with various accelerator manufacturers were performed by the author. Experience of the author in accelerator facilities construction and exploitation including those which were used for environmental protection are significant part of this publication. The principle of accelerator action was described in Chapter 1. Early development, accelerator classification and fields of accelerators application were included to this chapter as well. Details of accelerator construction was described in Chapter 2 to illustrate physical capability of accelerators to perform the function of ionizing radiation source. Electron beam extraction devices, under beam equipment, electron beam parameters and measuring methods were characterized in this chapter as well. Present studies of accelerator technology was described in Chapter 3, where
Optimization of accelerator control
International Nuclear Information System (INIS)
Vasiljev, N.D.; Mozin, I.V.; Shelekhov, V.A.; Efremov, D.V.
1992-01-01
Expensive exploitation of charged particle accelerators is inevitably concerned with requirements of effectively obtaining of the best characteristics of accelerated beams for physical experiments. One of these characteristics is intensity. Increase of intensity is hindered by a number of effects, concerned with the influence of the volume charge field on a particle motion dynamics in accelerator's chamber. However, ultimate intensity, determined by a volume charge, is almost not achieved for the most of the operating accelerators. This fact is caused by losses of particles during injection, at the initial stage of acceleration and during extraction. These losses are caused by deviations the optimal from real characteristics of the accelerating and magnetic system. This is due to a number of circumstances, including technological tolerances on structural elements of systems, influence of measuring and auxiliary equipment and beam consumers' installations, placed in the closed proximity to magnets, and instability in operation of technological systems of accelerator. Control task consists in compensation of deviations of characteristics of magnetic and electric fields by optimal selection of control actions. As for technical means, automatization of modern accelerators allows to solve optimal control problems in real time. Therefore, the report is devoted to optimal control methods and experimental results. (J.P.N.)
Acceleration of magnetized plasma rings
International Nuclear Information System (INIS)
Hartman, D.; Eddleman, J.; Hammer, J.H.
1982-01-01
One scheme is considered, acceleration of a ring between coaxial electrodes by a B/sub theta/ field as in a coaxial rail-gun. If the electrodes are conical, a ring accelerated towards the apex of the cone undergoes self-similar compression (focussing) during acceleration. Because the allowable acceleration force F/sub a/ = kappa U/sub m//R (kappa - 2 , the accelerating distance for conical electrodes is considerably shortened over that required for coaxial electrodes. In either case however, since the accelerating flux can expand as the ring moves, most of the accelerating field energy can be converted into kinetic energy of the ring leading to high efficiency
Accelerator and radiation physics
Basu, Samita; Nandy, Maitreyee
2013-01-01
"Accelerator and radiation physics" encompasses radiation shielding design and strategies for hadron therapy accelerators, neutron facilities and laser based accelerators. A fascinating article describes detailed transport theory and its application to radiation transport. Detailed information on planning and design of a very high energy proton accelerator can be obtained from the article on radiological safety of J-PARC. Besides safety for proton accelerators, the book provides information on radiological safety issues for electron synchrotron and prevention and preparedness for radiological emergencies. Different methods for neutron dosimetry including LET based monitoring, time of flight spectrometry, track detectors are documented alongwith newly measured experimental data on radiation interaction with dyes, polymers, bones and other materials. Design of deuteron accelerator, shielding in beam line hutches in synchrotron and 14 MeV neutron generator, various radiation detection methods, their characteriza...
2014 Accelerators meeting, Grenoble
International Nuclear Information System (INIS)
Lucotte, Arnaud; Lamy, Thierry; De Conto, Jean-Marie; Fontaine, Alain; Revol, Jean-Luc; Nadolski, Laurent S.; Kazamias, Sophie; Vretenar, Maurizio; Ferrando, Philippe; Laune, Bernard; Vedrine, Pierre
2014-10-01
The Accelerators meeting is organised every two years by the Accelerators division of the French Society of Physics (SFP). It brings together about 50 participants during a one-day meeting. The morning sessions are devoted to scientific presentations while the afternoon is dedicated to technical visits of facilities. This document brings together the available presentations (slides): 1 - Presentation of the Laboratory of subatomic physics and cosmology - LPSC-Grenoble (Lucotte, Arnaud; Lamy, Thierry); 2 - Presentation of the Accelerators division of the French Society of Physics (Fontaine, Alain; Revol, Jean-Luc); 3 - Presentation of Grenoble's master diplomas in Accelerator physics (Nadolski, Laurent S.); 4 - Presentation of Paris' master diplomas in big instruments (Kazamias, Sophie); 5 - Particle accelerators and European Union's projects (Vretenar, Maurizio); 6 - French research infrastructures (Ferrando, Philippe); 7 - Coordination of accelerators activity in France (Laune, Bernard; Vedrine, Pierre)
2009-06-01
2000 by the merger of Daimler Chrysler Aerospace AG (DASA) of Germany, Aerospatiale-Matra of France and Construcciones Aeronauticas SA (CASA) of...Aerospace AG (DASA) of Germany, Aerospatiale-Matra of France and Construcciones Aeronauticas SA (CASA) of Spain. 4. History of Mergers and Merger Waves
The Accelerator Reliability Forum
Lüdeke, Andreas; Giachino, R
2014-01-01
A high reliability is a very important goal for most particle accelerators. The biennial Accelerator Reliability Workshop covers topics related to the design and operation of particle accelerators with a high reliability. In order to optimize the over-all reliability of an accelerator one needs to gather information on the reliability of many different subsystems. While a biennial workshop can serve as a platform for the exchange of such information, the authors aimed to provide a further channel to allow for a more timely communication: the Particle Accelerator Reliability Forum [1]. This contribution will describe the forum and advertise it’s usage in the community.
The intense proton accelerator program
International Nuclear Information System (INIS)
Kaneko, Yoshihiko
1990-01-01
The Science and Technology Agency of Japan has formulated the OMEGA project, in which incineration of nuclear wastes by use of accelerators is defined as one of the important tasks. Japan Atomic Energy Research Institute (JAERI) has been engaged for several years in basic studies in incineration technology with use of an intense proton linear accelerator. The intense proton accelerator program intends to provide a large scale proton linear accelerator called Engineering Test Accelerator. The principal purpose of the accelerator is to develop nuclear waste incineration technology. The accelerator will also be used for other industrial applications and applied science studies. The present report further outlines the concept of incineration of radio-activities of nuclear wastes, focusing on nuclear reactions and a concept of incineration plant. Features of Engineering Test Accelerator are described focusing on the development of the accelerator, and research and development of incineration technology. Applications of science and technology other than nuclear waste incineration are also discussed. (N.K.)
Jose Antonio Jódar Sánchez
2014-01-01
¿Cómo interpretamos una oración como “El vendedor le vendió el libro a Nerea por 30 euros”? ¿Y cómo somos capaces de producirla? Una visión que va ganando adeptos sugiere que partimos de estructuras conceptuales y construcciones almacenadas en nuestra mente para crear una simulación mental. Esas estructuras son los marcos de la Semántica de Marcos y esas construcciones las de la Gramática de Construcciones Corporeizada. Dicha simulación, una especie de “historia” como las que creamos cuando l...
Caekenberghe, Ine Van; Segers, Veerle; Aerts, Peter; Willems, Patrick; De Clercq, Dirk
2013-07-06
Literature shows that running on an accelerated motorized treadmill is mechanically different from accelerated running overground. Overground, the subject has to enlarge the net anterior-posterior force impulse proportional to acceleration in order to overcome linear whole body inertia, whereas on a treadmill, this force impulse remains zero, regardless of belt acceleration. Therefore, it can be expected that changes in kinematics and joint kinetics of the human body also are proportional to acceleration overground, whereas no changes according to belt acceleration are expected on a treadmill. This study documents kinematics and joint kinetics of accelerated running overground and running on an accelerated motorized treadmill belt for 10 young healthy subjects. When accelerating overground, ground reaction forces are characterized by less braking and more propulsion, generating a more forward-oriented ground reaction force vector and a more forwardly inclined body compared with steady-state running. This change in body orientation as such is partly responsible for the changed force direction. Besides this, more pronounced hip and knee flexion at initial contact, a larger hip extension velocity, smaller knee flexion velocity and smaller initial plantarflexion velocity are associated with less braking. A larger knee extension and plantarflexion velocity result in larger propulsion. Altogether, during stance, joint moments are not significantly influenced by acceleration overground. Therefore, we suggest that the overall behaviour of the musculoskeletal system (in terms of kinematics and joint moments) during acceleration at a certain speed remains essentially identical to steady-state running at the same speed, yet acting in a different orientation. However, because acceleration implies extra mechanical work to increase the running speed, muscular effort done (in terms of power output) must be larger. This is confirmed by larger joint power generation at the level of
Van Caekenberghe, Ine; Segers, Veerle; Aerts, Peter; Willems, Patrick; De Clercq, Dirk
2013-01-01
Literature shows that running on an accelerated motorized treadmill is mechanically different from accelerated running overground. Overground, the subject has to enlarge the net anterior–posterior force impulse proportional to acceleration in order to overcome linear whole body inertia, whereas on a treadmill, this force impulse remains zero, regardless of belt acceleration. Therefore, it can be expected that changes in kinematics and joint kinetics of the human body also are proportional to acceleration overground, whereas no changes according to belt acceleration are expected on a treadmill. This study documents kinematics and joint kinetics of accelerated running overground and running on an accelerated motorized treadmill belt for 10 young healthy subjects. When accelerating overground, ground reaction forces are characterized by less braking and more propulsion, generating a more forward-oriented ground reaction force vector and a more forwardly inclined body compared with steady-state running. This change in body orientation as such is partly responsible for the changed force direction. Besides this, more pronounced hip and knee flexion at initial contact, a larger hip extension velocity, smaller knee flexion velocity and smaller initial plantarflexion velocity are associated with less braking. A larger knee extension and plantarflexion velocity result in larger propulsion. Altogether, during stance, joint moments are not significantly influenced by acceleration overground. Therefore, we suggest that the overall behaviour of the musculoskeletal system (in terms of kinematics and joint moments) during acceleration at a certain speed remains essentially identical to steady-state running at the same speed, yet acting in a different orientation. However, because acceleration implies extra mechanical work to increase the running speed, muscular effort done (in terms of power output) must be larger. This is confirmed by larger joint power generation at the level
Accelerator mass analysis at tandem accelerator in Kyoto University
Energy Technology Data Exchange (ETDEWEB)
Nakamura, Masanobu; Tazawa, Yuji; Matsumoto, Hiroshi; Hirose, Masanori [Kyoto Univ. (Japan). Faculty of Science; Ogino, Koya; Kohno, Masuchika; Funaba, Hiroyuki
1996-12-01
Tandem accelerator in Science Faculty, Kyoto University was renewed from 5 MV in the highest terminal voltage of Van de Graaff to 8 MV of Peletron in 1992. And, AMS effective for cosmic ray, dating, environment measurement and so forth is determined to a column of collaborative studies by universities and institutes in Japan. On this renewal, because of using high energy beam transportation of the present tandem accelerator, super high sensitivity measurement of long half-life radioactive isotopes of heavy elements such as {sup 36}Cl, {sup 41}Ca, {sup 129}I and so forth is aimed, although having some limitations due to small magnet. The accelerator is active in characteristics of the middle size tandem accelerator, and developing {sup 14}C measurement for its standard technology, as aiming at {sup 36}Cl measurement, at first. As a result, in this tandem accelerator stable and high beam transmittance could be obtained by adding a slit at negative ion source to make emittance of incident beam smaller. {sup 14}C/{sup 12}C ratio of Modan`s sample obtained by graphitizing NBS oxalic acid and Ded`s sample consisting of mineral graphite produced in Sri Lanka are measured to confirm better reproductivity of this system. Future development of successive incident method is planned to test actual carbon samples. (G.K.)
Dealing with post-accelerated electrons in the ITER SINGAP accelerator
International Nuclear Information System (INIS)
Esch, H. de; Hemsworth, R.S.
2006-01-01
Electrons formed by stripping of the negative deuterium beam can be accelerated up to 960 keV in the 1 MeV SINGAP 40 A negative ion accelerator proposed by Europe for the ITER neutral beam injectors. SINGAP accelerates 1280 pre-accelerated 40 keV deuterium beamlets to 1 MeV in a single 350 mm wide gap. At the expected gas pressure of 0.03 Pa inside the accelerator, 2.7 MW of electrons are calculated to leave the accelerator and strike various beamline components, especially the neutraliser. The accelerators of the ITER injectors are designed to produce 4 '' column '' beams which pass through the 4 vertical channels of the neutraliser. Unperturbed the accelerated electrons create small, high power density, 3.3 kW/cm 2 , spots on the leading edges of the neutraliser channels, which is far in excess of their power handling capability. The hot spots arise from the overlapping of beamlets due to the bending induced by the far field of the magnetic filter in the ion source. The proposed solution bends the electrons further downwards, redistributing the power over the neutraliser floor, a vertical electron dump perpendicular to the beam axis located below the neutraliser entrance, and the neutraliser entrance. The bending is to be effected by a magnetic field transverse to the beam direction at the exit of the post-acceleration grid. This field is created by vertical columns of permanent magnets either side of each column beam. After passing between the magnet columns, the electron beams reach the electron dump with a maximum power density of 2.1 kW/cm 2 . The peak power density on the neutraliser entrance is 1.35 kW/cm 2 and on the neutraliser floor 0.82 kW/cm 2 . Electron backscattering would reduce all the numbers by 20%. To further reduce the average power density seen by the beamline components it is proposed to sweep the electron beam in an oscillatory fashion. It is suggested that a failsafe, inexpensive, way is to use a power supply with a ripple of ± 10% to
Control of electron injection and acceleration in laser-wakefield accelerators
International Nuclear Information System (INIS)
Guillaume, E.
2015-01-01
Laser-plasma accelerators provide a promising compact alternative to conventional accelerators. Plasma waves with extremely strong electric fields are generated when a high intensity laser is focused into an underdense gas target. Electrons that are trapped in these laser-driven plasma waves can be accelerated up to energies of a few GeVs. Despite their great potential, laser-wakefield accelerators face some issues, regarding notably the stability and reproducibility of the beam when electrons are injected in the accelerating structure. In this manuscript, different techniques of electron injection are presented and compared, notably injection in a sharp density gradient and ionization injection. It is shown that combining these two methods allows for the generation of stable and tunable electron beams. We have also studied a way to manipulate the electron bunch in the phase-space in order to accelerate the bunch beyond the dephasing limit. Such a technique was used with quasi-monoenergetic electron beams to enhance their energy. Moreover, the origin of the evolution of the angular momentum of electrons observed experimentally was investigated. Finally, we demonstrated experimentally a new method - the laser-plasma lens - to strongly reduce the divergence of the electron beam. This laser-plasma lens consists of a second gas jet placed at the exit of the accelerator. The laser pulse drives a wakefield in this second jet whose focusing forces take advantage to reduce the divergence of the trailing electron bunch. A simple analytical model describing the principle is presented, underlining the major importance of the second jet length, density and distance from the first jet. Experimental demonstration of the laser-plasma lens shows a divergence reduction by a factor of 2.6 for electrons up to 300 MeV, in accordance with the model predictions
CAS CERN accelerator school: 5. general accelerator physics course. Vol. 2. Proceedings
International Nuclear Information System (INIS)
Turner, S.
1994-01-01
The fifth CERN Accelerator School (CAS) basic course on General Accelerator Physics was given at the University of Jyvaeskylae, Finland, from 7 to 18 September 1992. Its syllabus was based on the previous similar courses held at Gif-sur-Yvette in 1984, Aarhus 1986, Salamanca 1988 and Juelich 1990, and whose proceedings were published as CERN Reports 85-19, 87-10, 89-05 and 91-04, respectively. However, certain topics were treated in a different way, improved or extended, while new subjects were introduced. As far as the proceedings of this school are concerned the opportunity was taken not only to include the lectures presented but also to select and revise the most appropriate chapters from the previous similar schools. In this way the present volumes constitute a rather complete introduction to all aspects of the design and construction of particle accelerators, including optics, emittance, luminosity, longitudinal and transverse beam dynamics, insertions, chromaticity, transfer lines, resonances, accelerating structures, tune shifts, coasting beams, lifetime, synchrotron radiation, radiation damping, beam-beam effects, diagnostics, cooling, ion and positron sources, RF and vacuum systems, injection and extraction, conventional, permanent and superconducting magnets, cyclotrons, RF linear accelerators, microtrons, as well as applications of particle accelerators (including therapy) and the history of accelerators. See hints under the relevant topics. (orig.)
Energy Technology Data Exchange (ETDEWEB)
Marroquin de Jesus, A; Olivares Ramirez, J.M.; Ramos Lopez, G.A.; Pless, R.C. [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Instituto Politecnico Nacional, Unidad Queretaro (Mexico)]. E-mail: amarroquind@utsjr.edu.mx
2009-07-15
Design, construction, and testing of the thermal performance of a flat solar collector for domestic water heating are described. The absorbing plate is built from readily available materials: two sheets of galvanized steel, one of the channelled types, the other one flat, which are joined by electric welding. The absorber is connected to a 198-L thermotank, insulated with polyurethane foam. In terms of receiving surface, the prototype tested here has an area of 1.35 m{sup 2}, about 20% smaller than comparable copper-tube-based collectors offered in the market. Temperature measurements conducted over a 30-day period gave values which were a few degrees lower than the theoretically calculated water temperatures. Momentary thermal efficiency values between 35% and 77% were observed. The water temperature achieved the tank at the end of the day averages 65 degrees Celsius in winter weather conditions in the central Mexican highland. This design of solar water heater is well suited to Mexican conditions, as it makes use of the high local intensity of the solar radiation, and as the channel shape of the ducts minimizes bursting during the rare occurrences of freezing temperatures in the region; it also has the advantage of being manufacturable at low cost from simple materials. [Spanish] Se describe el diseno, construccion y pruebas del desempeno termico de un colector solar plano para calentamiento de agua para uso domestico. La placa absorbedora se construyo de materiales facilmente asequibles: dos placas de acero galvanizado, una del tipo acanalado y la otra plana, unidas mediante soldadura de acero electrico. La placa absorbedora esta conectada a un termotanque con capacidad de 198 L, aislado con espuma de poliuretano. La superficie receptora de este prototipo es de 1.35 m{sup 2}, aproximadamente 20% mas pequena comparado con los colectores, basados en tubos de cobre, ofertados en el mercado. Mediciones de temperatura por un periodo de 30 dias, arrojaron valores
Development of bipolar-pulse accelerator for intense pulsed ion beam acceleration
Energy Technology Data Exchange (ETDEWEB)
Masugata, Katsumi [Department of Electrical and Electronic System Engineering, Toyama University, 3190 Gofuku, Toyama 930-8555 (Japan)]. E-mail: masugata@eng.toyama-u.ac.jp; Shimizu, Yuichro [Department of Electrical and Electronic System Engineering, Toyama University, 3190 Gofuku, Toyama 930-8555 (Japan); Fujioka, Yuhki [Department of Electrical and Electronic System Engineering, Toyama University, 3190 Gofuku, Toyama 930-8555 (Japan); Kitamura, Iwao [Department of Electrical and Electronic System Engineering, Toyama University, 3190 Gofuku, Toyama 930-8555 (Japan); Tanoue, Hisao [National Institute of Advanced Industry Science and Technology, 1-1-1, Umezono, Tsukuba-shi, Ibaraki 305-8568 (Japan); Arai, Kazuo [National Institute of Advanced Industry Science and Technology, 1-1-1, Umezono, Tsukuba-shi, Ibaraki 305-8568 (Japan)
2004-12-21
To improve the purity of intense pulsed ion beams, a new type of pulsed ion beam accelerator named 'bipolar pulse accelerator' was proposed. To confirm the principle of the accelerator a prototype of the experimental system was developed. The system utilizes By type magnetically insulated acceleration gap and operated with single polar negative pulse. A coaxial gas puff plasma gun was used as an ion source, which was placed inside the grounded anode. Source plasma (nitrogen) of current density {approx}25A/cm2, duration {approx}1.5{mu}s was injected into the acceleration gap by the plasma gun. The ions were successfully accelerated from the grounded anode to the drift tube by applying negative pulse of voltage 240kV, duration 100ns to the drift tube. Pulsed ion beam of current density {approx}40A/cm2, duration {approx}50ns was obtained at 41mm downstream from the anode surface. To evaluate the irradiation effect of the ion beam to solid material, an amorphous silicon thin film of thickness {approx}500nm was used as the target, which was deposited on the glass substrate. The film was found to be poly-crystallized after 4-shots of the pulsed nitrogen ion beam irradiation.
Applications of particle accelerators
International Nuclear Information System (INIS)
Barbalat, O.
1994-01-01
Particle accelerators are now widely used in a variety of applications for scientific research, applied physics, medicine, industrial processing, while possible utilisation in power engineering is envisaged. Earlier presentations of this subject, given at previous CERN Accelerator School sessions have been updated with papers contributed to the first European Conference on Accelerators in Applied Research and Technology (ECAART) held in September 1989 in Frankfurt and to the Second European Particle Accelerator Conference in Nice in June 1990. (orig.)
International Nuclear Information System (INIS)
Johansson, E.
1986-01-01
Interactions of high-energy particles with atomic nuclei, in particular heavy ones, leads to a strong emission of neutrons. Preferably these high-energy particles are protons or deuterons obtained from a linear accelerator. The neutrons emitted are utilized in the conversion of U238 to Pu239 or of Th232 to U233. The above is the basis of the accelerator breeder, a concept studied abroad in many variants. No such breeder has, however, so far been built, but there exists vast practical experience on the neutron production and on the linear accelerator. Some of the variants mentioned are described in the report, after a presentation of general characteristics for the particle-nucleus interaction and for the linear accelerator. (author)
Nonlinear dynamics in particle accelerators
Dilão, Rui
1996-01-01
This book is an introductory course to accelerator physics at the level of graduate students. It has been written for a large audience which includes users of accelerator facilities, accelerator physicists and engineers, and undergraduates aiming to learn the basic principles of construction, operation and applications of accelerators.The new concepts of dynamical systems developed in the last twenty years give the theoretical setting to analyse the stability of particle beams in accelerator. In this book a common language to both accelerator physics and dynamical systems is integrated and dev
International Nuclear Information System (INIS)
Wilson, P.B.
1986-02-01
In a wake field accelerator a high current driving bunch injected into a structure or plasma produces intense induced fields, which are in turn used to accelerate a trailing charge or bunch. The basic concepts of wake field acceleration are described. Wake potentials for closed cavities and periodic structures are derived, as are wake potentials on a collinear path with a charge distribution. Cylindrically symmetric structures excited by a beam in the form of a ring are considered
Plasma based charged-particle accelerators
International Nuclear Information System (INIS)
Bingham, R; Mendonca, J T; Shukla, P K
2004-01-01
Studies of charged-particle acceleration processes remain one of the most important areas of research in laboratory, space and astrophysical plasmas. In this paper, we present the underlying physics and the present status of high gradient and high energy plasma accelerators. We will focus on the acceleration of charged particles to relativistic energies by plasma waves that are created by intense laser and particle beams. The generation of relativistic plasma waves by intense lasers or electron beams in plasmas is important in the quest for producing ultra-high acceleration gradients for accelerators. With the development of compact short pulse high brightness lasers and electron positron beams, new areas of studies for laser/particle beam-matter interactions is opening up. A number of methods are being pursued vigorously to achieve ultra-high acceleration gradients. These include the plasma beat wave accelerator mechanism, which uses conventional long pulse (∼100 ps) modest intensity lasers (I ∼ 10 14 -10 16 W cm -2 ), the laser wakefield accelerator (LWFA), which uses the new breed of compact high brightness lasers ( 10 18 W cm -2 , the self-modulated LWFA concept, which combines elements of stimulated Raman forward scattering, and electron acceleration by nonlinear plasma waves excited by relativistic electron and positron bunches. In the ultra-high intensity regime, laser/particle beam-plasma interactions are highly nonlinear and relativistic, leading to new phenomena such as the plasma wakefield excitation for particle acceleration, relativistic self-focusing and guiding of laser beams, high-harmonic generation, acceleration of electrons, positrons, protons and photons. Fields greater than 1 GV cm -1 have been generated with particles being accelerated to 200 MeV over a distance of millimetre. Plasma wakefields driven by positron beams at the Stanford Linear Accelerator Center facility have accelerated the tail of the positron beam. In the near future
Particle accelerators in the Czech lands
International Nuclear Information System (INIS)
Janovsky, I.
2007-01-01
The paper is structured as follows: A short look into history of accelerators; Particle accelerators in the Czech lands (Accelerators at the Institute of Nuclear Physics; Accelerators at the Faculty of Mathematics and Physics, Charles University; Czechoslovak betatron, accelerators for non-destructive testing and radiotherapy; Czechoslovak high-frequency linear electron accelerator; Czechoslovak-Soviet microtron; Accelerators at the State Research Institute of Textiles; Accelerators at the Kablo Vrchlabi plant; and Cyclotrons in the medical sector. (P.A.)
High intensity proton accelerator program
International Nuclear Information System (INIS)
Kaneko, Yoshihiko; Mizumoto, Motoharu; Nishida, Takahiko
1991-06-01
Industrial applications of proton accelerators to the incineration of the long-lived nuclides contained in the spent fuels have long been investigated. Department of Reactor Engineering of Japan Atomic Energy Research Institute (JAERI) has formulated the Accelerator Program through the investigations on the required performances of the accelerator and its development strategies and also the research plan using the accelerator. Outline of the Program is described in the present report. The target of the Program is the construction of the Engineering Test Accelerators (ETA) of the type of a linear accelerator with the energy 1.5 GeV and the proton current ∼10 mA. It is decided that the construction of the Basic Technology Accelerator (BTA) is necessary as an intermediate step, aiming at obtaining the required technical basis and human resources. The Basic Technology Accelerator with the energy of 10 MeV and with the current of ∼10 mA is composed of the ion source, RFQ and DTL, of which system forms the mock-up of the injector of ETA. Development of the high-β structure which constitutes the main acceleration part of ETA is also scheduled. This report covers the basic parameters of the Basic Technology Accelerator (BTA), development steps of the element and system technologies of the high current accelerators and rough sketch of ETA which can be prospected at present. (J.P.N.)
Plasma-focused cyclic accelerators
International Nuclear Information System (INIS)
Mondelli, A.A.; Chernin, D.P.
1985-01-01
The use of ambient plasma to neutralize the transverse forces of an intense particle beam has been known for many years. Most recently, the so-called ion-focused regime (IFR) for beam propagation has been used as a means of focusing intense electron beams in linear accelerators and suggested for injecting an electron beam across magnetic field lines into a high-current cyclic accelerator. One technique for generating the required background plasma for IFR propagation is to use a laser to ionize ambient gas in the accelerator chamber. For cyclic accelerators a technique is required for carrying the plasma channel and the beam around a bend. Multiple laser-generated channels with dipole magnetic fields to switch the beam from one channel to the next have been tested at Sandia. This paper discusses an alternative means of plasma production for IFR, viz. by using rf breakdown. For this approach the accelerator chamber acts as a waveguide. With a suitable driving frequency, a waveguide mode can be driven which has its peak field intensity on the axis with negligible fields at the chamber walls. The plasma production and hence the beam propagation is thereby isolated from the walls. This technique is not limited to toroidal accelerators. It may be applied to any accelerator or recirculator geometry as well as for beam steering and for injection or extraction of beams in closed accelerator configurations
Resent advance in electron linear accelerators
International Nuclear Information System (INIS)
Takeda, Seishi; Tsumori, Kunihiko; Takamuku, Setsuo; Okada, Toichi; Hayashi, Koichiro; Kawanishi, Masaharu
1986-01-01
In recently constructed electron linear accelerators, there has been remarkable advance both in acceleration of a high-current single bunch electron beam for radiation research and in generation of high accelerating gradient for high energy accelerators. The ISIR single bunch electron linear accelerator has been modified an injector to increase a high-current single bunch charge up to 67 nC, which is ten times greater than the single bunch charge expected in early stage of construction. The linear collider projects require a high accelerating gradient of the order of 100 MeV/m in the linear accelerators. High-current and high-gradient linear accelerators make it possible to obtain high-energy electron beam with small-scale linear accelerators. The advance in linear accelerators stimulates the applications of linear accelerators not only to fundamental research of science but also to industrial uses. (author)
International Nuclear Information System (INIS)
Anon.
1989-01-01
At the international level, the high energy accelerator scene evolves rapidly and the International Conference on High Energy Accelerators is where its strong pulse can best be felt. This year, the Conference was held for the first time in Japan, with the 14th meeting in the series having been hosted in August by the Japanese KEK National Laboratory for High Energy Physics, Tsukuba. The venue was a recognition of the premier accelerator physics and technology status achieved by this diligent nation
Energy Technology Data Exchange (ETDEWEB)
Anon.
1989-11-15
At the international level, the high energy accelerator scene evolves rapidly and the International Conference on High Energy Accelerators is where its strong pulse can best be felt. This year, the Conference was held for the first time in Japan, with the 14th meeting in the series having been hosted in August by the Japanese KEK National Laboratory for High Energy Physics, Tsukuba. The venue was a recognition of the premier accelerator physics and technology status achieved by this diligent nation.
International Nuclear Information System (INIS)
Olson, C.L.
1975-01-01
In a recently proposed linear collective accelerator, ions are accelerated in a steep, moving potential well created at the head of an intense relativistic electron beam. The steepness of the potential well and its motion are controlled by the external ionization of a suitable background gas. Calculations concerning optimum choices for the background gas and the ionization method are presented; a two-step photoionization process employing Cs vapor is proposed. In this process, a super-radiant light source is used to excite the gas, and a UV laser is used to photoionize the excited state. The appropriate line widths and coupled ionization growth rate equations are discussed. Parameter estimates are given for a feasibility experiment, for a 1 GeV proton accelerator, and for a heavy ion accelerator (50 MeV/nucleon uranium). (auth)
JACoW Decoupling CERN accelerators
Dworak, Andrzej
2018-01-01
The accelerator complex at CERN is a living system. Accelerators are being dismantled, upgraded or change their purpose. New accelerators are built. The changes do not happen overnight, but when they happen they may require profound changes across the handling systems. Central timings (CT), responsible for sequencing and synchronization of accelerators, are good examples of such systems. This paper shows how over the past twenty years the changes and new requirements influenced the evolution of the CTs. It describes experience gained from using the Central Beam and Cycle Manager (CBCM) CT model, for strongly coupled accelerators, and how it led to a design of a new Dynamic Beam Negotiation (DBN) model for the AD and ELENA accelerators, which reduces the coupling, increasing accelerator independence. The paper ends with an idea how to merge strong points of both models in order to create a single generic system able to efficiently handle all CERN accelerators and provide more beam time to experiments and LHC.
International Nuclear Information System (INIS)
Lefebvre, E.
2010-01-01
This series of slides overviews the development of powerful lasers for inertial confinement fusion (Icf) at NIF (National Ignition Facility, Usa) and LMJ (Laser Megajoule, France) facilities. Then the principle of laser wakefield acceleration is presented and the possibility of designing compact accelerators delivering 200 GeV/m while conventional RF accelerators reach only 50 MeV/m, is considered. This technical breakthrough will bring important gains in terms of size, cost and new uses for accelerators. While Icf will use nanosecond (10 -9 s) laser pulses, wakefield accelerators will use femtosecond (10 -15 s) laser pulses which means more power but less energy. The electrons accelerated by laser can produce a multi-MeV X radiation useful for industrial radiography or cancer treatment. (A.C.)
Hochberg, K.; Gröber, S.; Kuhn, J.; Müller, A.
2014-03-01
Here, we show the possibility of analysing circular motion and acceleration using the acceleration sensors of smartphones. For instance, the known linear dependence of the radial acceleration on the distance to the centre (a constant angular frequency) can be shown using multiple smartphones attached to a revolving disc. As a second example, the decrease of the radial acceleration and the rotation frequency due to friction can be measured and fitted with a quadratic function, in accordance with theory. Finally, because the disc is not set up exactly horizontal, each smartphone measures a component of the gravitational acceleration that adds to the radial acceleration during one half of the period and subtracts from the radial acceleration during the other half. Hence, every graph shows a small modulation, which can be used to determine the rotation frequency, thus converting a ‘nuisance effect’ into a source of useful information, making additional measurements with stopwatches or the like unnecessary.
International Nuclear Information System (INIS)
Malitsky, Nikolay; Talman, Richard
1997-01-01
A 'Universal Accelerator Libraries' (UAL) environment is described. Its purpose is to facilitate program modularity and inter-program and inter-process communication among heterogeneous programs. The goal ultimately is to facilitate model-based control of accelerators
Energy Technology Data Exchange (ETDEWEB)
Anon.
1987-12-15
The expanded 1987 US Particle Accelerator School, held at Fermilab from 20 July to 14 August, included two two-week sessions. In the first, 101 students covered three university-style courses, listed as upper-division University of Chicago physics, covering the fundamentals of particle beams, magnetic optics and acceleration; relativistic electronics; and high energy storage rings. The 180 participants in the second session profited from 24 short courses presented by experts and covering a wide variety of topics in the physics and technology of particle accelerators.
International Nuclear Information System (INIS)
Anon.
1985-01-01
In the past, providing higher particle beam energies meant building bigger accelerators. It is now universally accepted that with the current generation of accelerator projects either under construction (such as LEP at CERN) or proposed (such as the Superconducting Super Collider in the US), conventional techniques are reaching their practical limit. With the growing awareness that progress in particle physics requires new methods to accelerate particles, workshops and study groups are being set up across the world to search for ideas for the machines of tomorrow
Siemann, Robert
1998-04-01
Current particle accelerators rely on conventional or superconducting radio frequency cavities to accelerate beams of protons or electrons for nuclear and particle research and for medical and materials science studies. New methods for achieving larger accelerating gradients have been proposed and are being studied. These include the use of high power lasers, laser driven plasmas, wake fields generated by intense low energy beams, and millimeter wavelength EM structures. The studies to date, and the prospects for practical applications of these new ideas will be discussed.
Energy Technology Data Exchange (ETDEWEB)
Anon.
1985-05-15
In the past, providing higher particle beam energies meant building bigger accelerators. It is now universally accepted that with the current generation of accelerator projects either under construction (such as LEP at CERN) or proposed (such as the Superconducting Super Collider in the US), conventional techniques are reaching their practical limit. With the growing awareness that progress in particle physics requires new methods to accelerate particles, workshops and study groups are being set up across the world to search for ideas for the machines of tomorrow.
International Nuclear Information System (INIS)
Anon.
1988-01-01
In September, the CERN Accelerator School (CAS) held its third General Accelerator Physics Course, the venue this time being Salamanca, the oldest university in Spain. Spain, which rejoined CERN in 1982, now has a vigorous and steadily growing high energy physics community making substantial contributions to physics detector development and successfully involving Spanish industry. However the embryonic accelerator community cannot yet generate an equivalent level of activity, and this important channel for introducing new high technology into industry has yet to be fully exploited
Phase-of-flight method for setting the accelerating fields in the ion linear accelerator
International Nuclear Information System (INIS)
Dvortsov, S.V.; Lomize, L.G.
1983-01-01
For setting amplitudes and phases of accelerating fields in multiresonator ion accelerators presently Δt-procedure is used. The determination and setting of two unknown parameters of RF-field (amplitude and phase) in n-resonator is made according to the two increments of particle time-of-flight, measured experimentally: according to the change of the particle time-of-flight Δt 1 in the n-resonator, during the field switching in the resonator, and according to the change of Δt 2 of the time-of-flight in (n+1) resonator without RF-field with the switching of accelerating field in the n-resonator. When approaching the accelerator exit the particle energy increases, relative energy increment decreases and the accuracy of setting decreases. To enchance the accuracy of accelerating fields setting in a linear ion accelerator a phase-of-flight method is developed, in which for the setting of accelerating fields the measured time-of-flight increment Δt only in one resonator is used (the one in which the change of amplitude and phase is performed). Results of simulation of point bunch motion in the IYaI AN USSR linear accelerator are presented
Unlimited Relativistic Shock Surfing Acceleration
International Nuclear Information System (INIS)
Ucer, D.; Shapiro, V. D.
2001-01-01
Nonrelativistic shock surfing acceleration at quasiperpendicular shocks is usually considered to be a preacceleration mechanism for slow pickup ions to initiate diffusive shock acceleration. In shock surfing, the particle accelerates along the shock front under the action of the convective electric field of the plasma flow. However, the particle also gains kinetic energy normal to the shock and eventually escapes downstream. We consider the case when ions are accelerated to relativistic velocities. In this case, the ions are likely to be trapped for infinitely long times, because the energy of bounce oscillations tends to decrease during acceleration. This suggests the possibility of unlimited acceleration by shock surfing
CAS CERN Accelerator School. Third advanced accelerator physics course
International Nuclear Information System (INIS)
Turner, S.
1990-01-01
The third version of the CERN Accelerator School's (CAS) advanced course on General Accelerator Physics was given at Uppsala University from 18-29 September, 1989. Its syllabus was based on the previous courses held in Oxford, 1985 and Berlin, 1987 whose proceedings were published as CERN Yellow Reports 87-03 and 89-01 respectively. However, the opportunity was taken to emphasize the physics of small accelerators and storage rings, to present some topics in new ways, and to introduce new seminars. Thus the lectures contained in the present volume include chromaticity, dynamic aperture, kinetic theory, Landau damping, ion-trapping, Schottky noise, laser cooling and small ring lattice problems while the seminars include interpretation of numerical tracking, internal targets and living with radiation. (orig.)
Energy Technology Data Exchange (ETDEWEB)
Anon.
1987-06-15
The first report from the Washington Accelerator Conference concentrated on news from the particle physics centres. But the bulk of the Conference covered the use of accelerators in other fields, underlining this valuable spinoff from particle physics.
International Nuclear Information System (INIS)
Timmer, E.; Heine, E.
1985-01-01
Along the NIKHEF accelerator in Amsterdam (Netherlands), at several places a signal is needed for the sychronisation of all devices with the acceleration process. In this report, basic principles and arrangements of this timing system are described
Accelerators in Science and Technology
Kailas, S
2002-01-01
Accelerators built for basic research in frontier areas of science have become important and inevitable tools in many areas of science and technology. Accelerators are examples of science driven high technology development. Accelerators are used for a wide ranging applications, besides basic research. Accelerator based multidisciplinary research holds great promise
International Nuclear Information System (INIS)
Nelson, S; Poole, B; Caporaso, G
2007-01-01
Proton accelerator structures for medical applications using Dielectric Wall Accelerator (DWA) technology allow for the utilization of high electric field gradients on the order of 100 MV/m to accelerate the proton bunch. Medical applications involving cancer therapy treatment usually desire short bunch lengths on the order of hundreds of picoseconds in order to limit the extent of the energy deposited in the tumor site (in 3D space, time, and deposited proton charge). Electromagnetic simulations of the DWA structure, in combination with injections of proton bunches have been performed using 3D finite difference codes in combination with particle pushing codes. Electromagnetic simulations of DWA structures includes these effects and also include the details of the switch configuration and how that switch time affects the electric field pulse which accelerates the particle beam
TIARA electrostatic accelerator facility
International Nuclear Information System (INIS)
Tajima, Satoshi; Takada, Isao; Mizuhashi, Kiyoshi; Uno, Sadanori; Ohkoshi, Kiyonori; Nakajima, Yoshinori; Saitoh, Yuichi; Ishii, Yasuyuki; Kamiya, Tomihiro
1996-07-01
In order to promote the Advanced Radiation Technology Project, Japan Atomic Energy Research Institute constructed TIARA facility composed of four ion accelerators at Takasaki Radiation Chemistry Research Establishment for the period from 1988 to 1993. A 3MV tandem accelerator and an AVF cycrotron were completed in 1991 as the first phase of the construction, and a 3MV single-ended accelerator and a 400kV ion implanter were completed in 1993 as the second phase. Three electrostatic accelerators, the tandem, the single-ended and the implanter, were installed in the Multiple-beam facility of TIARA and have been operated for various experiments with using single, dual and triple beams without any serious trouble. This report describes the constructive works, machine performances, control systems, safety systems and accessory equipments of the electrostatic accelerators. (author)
Wangler, Thomas P
2008-01-01
Thomas P. Wangler received his B.S. degree in physics from Michigan State University, and his Ph.D. degree in physics and astronomy from the University of Wisconsin. After postdoctoral appointments at the University of Wisconsin and Brookhaven National Laboratory, he joined the staff of Argonne National Laboratory in 1966, working in the fields of experimental high-energy physics and accelerator physics. He joined the Accelerator Technology Division at Los Alamos National Laboratory in 1979, where he specialized in high-current beam physics and linear accelerator design and technology. In 2007
International Nuclear Information System (INIS)
Anon.
1987-01-01
Dedicated to its goal of encouraging scientists and students to work in the field of particle accelerators, the US Particle Accelerator School (operating since 1981) has switched to a new format. Starting this year, it will offer in alternate years basic accelerator physics plus advanced subjects in both university and symposium styles over four weeks. Expanding the school from two to four weeks gives additional flexibility, and undergraduate participation should be encouraged by university credits being offered for particular courses. In the intervening years, the school will organize six-day topical courses
YEREVAN: Acceleration workshop
International Nuclear Information System (INIS)
Anon.
1989-01-01
Sponsored by the Yerevan Physics Institute in Armenia, a Workshop on New Methods of Charged Particle Acceleration in October near the Nor Amberd Cosmic Ray Station attracted participants from most major accelerator centres in the USSR and further afield
Angular Acceleration without Torque?
Kaufman, Richard D.
2012-01-01
Hardly. Just as Robert Johns qualitatively describes angular acceleration by an internal force in his article "Acceleration Without Force?" here we will extend the discussion to consider angular acceleration by an internal torque. As we will see, this internal torque is due to an internal force acting at a distance from an instantaneous center.
Progress of Laser-Driven Plasma Accelerators
International Nuclear Information System (INIS)
Nakajima, Kazuhisa
2007-01-01
There is a great interest worldwide in plasma accelerators driven by ultra-intense lasers which make it possible to generate ultra-high gradient acceleration and high quality particle beams in a much more compact size compared with conventional accelerators. A frontier research on laser and plasma accelerators is focused on high energy electron acceleration and ultra-short X-ray and Tera Hertz radiations as their applications. These achievements will provide not only a wide range of sciences with benefits of a table-top accelerator but also a basic science with a tool of ultrahigh energy accelerators probing an unknown extremely microscopic world.Harnessing the recent advance of ultra-intense ultra-short pulse lasers, the worldwide research has made a tremendous breakthrough in demonstrating high-energy high-quality particle beams in a compact scale, so called ''dream beams on a table top'', which represents monoenergetic electron beams from laser wakefield accelerators and GeV acceleration by capillary plasma-channel laser wakefield accelerators. This lecture reviews recent progress of results on laser-driven plasma based accelerator experiments to quest for particle acceleration physics in intense laser-plasma interactions and to present new outlook for the GeV-range high-energy laser plasma accelerators
International Nuclear Information System (INIS)
Simonenko, A.V.; Pistryak, V.M.; Zats, A.V.; Levchenko, Yu.Z.; Kuz'menko, V.V.
1987-01-01
Features of charged particle accelerated beam shaping in the electrostatic part of the ''Sokol'' small-size accelerator are considered in complex taking into account the electrode real geometry. Effect of the extracting, accelerating electorde potential and accelerator total voltage on beam behaviour is investigated. A modified variation of the beam shaping system, allowing to decrease 2 times the required interval of accelerating electrode potential adjustment and to decrease the beam size in the starting acceleration region, is presented. It permits to simplify the construction and to improve accelerator operation. Comparison of experimental and calculational data on the beam in the improved accelerator variation is carried out. Effect of peripheral parts of accelerating tube electrodes on the beam is investigated
Special issue - Applying the accelerator
International Nuclear Information System (INIS)
Anon.
1995-01-01
T'he CERN Courier is the international journal of high energy physics, covering current developments in and around this branch of basic science. A recurrent theme is applying the technology developed for particle accelerators, the machines which produce beams of high energy particles for physics experiments. Twentieth-century science is full of similar examples of applications derived from pure research. This special issue of the CERN Courier is given over to one theme - the applications of accelerators. Accelerator systems and facilities are normally associated with highenergy particle physics research, the search for fundamental particles and the quest to understand the physics of the Big Bang. To the layman, accelerator technology has become synonymous with large and expensive machines, exploiting the most modern technology for basic research. In reality, the range of accelerators and their applications is much broader. A vast number of accelerators, usually much smaller and operating for specific applications, create wealth and directly benefit the population, particularly in the important areas of healthcare, energy and the environment. There are well established applications in diagnostic and therapeutic medicine for research and routine clinical treatments. Accelerators and associated technologies are widely employed by industry for manufacturing and process control. In fundamental and applied research, accelerator systems are frequently used as tools. The biennial conference on the Applications of Accelerators in Industry and Research at Denton, Texas, attracts a thousand participants. This special issue of the CERN Courier includes articles on major applications, reflecting the diversity and value of accelerator technology. Under Guest Editor Dewi Lewis of Amersham International, contributions from leading international specialists with experience of the application end of the accelerator chain describe their fields of direct interest. The
Special issue - Applying the accelerator
Energy Technology Data Exchange (ETDEWEB)
Anon.
1995-07-15
T'he CERN Courier is the international journal of high energy physics, covering current developments in and around this branch of basic science. A recurrent theme is applying the technology developed for particle accelerators, the machines which produce beams of high energy particles for physics experiments. Twentieth-century science is full of similar examples of applications derived from pure research. This special issue of the CERN Courier is given over to one theme - the applications of accelerators. Accelerator systems and facilities are normally associated with highenergy particle physics research, the search for fundamental particles and the quest to understand the physics of the Big Bang. To the layman, accelerator technology has become synonymous with large and expensive machines, exploiting the most modern technology for basic research. In reality, the range of accelerators and their applications is much broader. A vast number of accelerators, usually much smaller and operating for specific applications, create wealth and directly benefit the population, particularly in the important areas of healthcare, energy and the environment. There are well established applications in diagnostic and therapeutic medicine for research and routine clinical treatments. Accelerators and associated technologies are widely employed by industry for manufacturing and process control. In fundamental and applied research, accelerator systems are frequently used as tools. The biennial conference on the Applications of Accelerators in Industry and Research at Denton, Texas, attracts a thousand participants. This special issue of the CERN Courier includes articles on major applications, reflecting the diversity and value of accelerator technology. Under Guest Editor Dewi Lewis of Amersham International, contributions from leading international specialists with experience of the application end of the accelerator chain describe their fields of direct interest. The contributions
Cheng, D. Y.
1971-01-01
Converging, coaxial accelerator electrode configuration operates in vacuum as plasma gun. Plasma forms by periodic injections of high pressure gas that is ionized by electrical discharges. Deflagration mode of discharge provides acceleration, and converging contours of plasma gun provide focusing.
Coupling and decoupling of the accelerating units for pulsed synchronous linear accelerator
Shen, Yi; Liu, Yi; Ye, Mao; Zhang, Huang; Wang, Wei; Xia, Liansheng; Wang, Zhiwen; Yang, Chao; Shi, Jinshui; Zhang, Linwen; Deng, Jianjun
2017-12-01
A pulsed synchronous linear accelerator (PSLA), based on the solid-state pulse forming line, photoconductive semiconductor switch, and high gradient insulator technologies, is a novel linear accelerator. During the prototype PSLA commissioning, the energy gain of proton beams was found to be much lower than expected. In this paper, the degradation of the energy gain is explained by the circuit and cavity coupling effect of the accelerating units. The coupling effects of accelerating units are studied, and the circuit topologies of these two kinds of coupling effects are presented. Two methods utilizing inductance and membrane isolations, respectively, are proposed to reduce the circuit coupling effects. The effectiveness of the membrane isolation method is also supported by simulations. The decoupling efficiency of the metal drift tube is also researched. We carried out the experiments on circuit decoupling of the multiple accelerating cavity. The result shows that both circuit decoupling methods could increase the normalized voltage.
Particle acceleration by collective effects
International Nuclear Information System (INIS)
Keefe, D.
1976-01-01
Successful acceleration of protons and other ions has been achieved experimentally in this decade by a number of different collective methods. The attainment of very high accelerating fields has been established although so far the acceleration distance has been confined to only a few centimeters. Efforts are in progress to understand the accelerating mechanisms in detail and, as a result, to devise ways of extending considerably the acceleration distance. This paper is intended to review the current progress, expectations, and limitations of the different approaches. (author)
Particle acceleration by collective effects
International Nuclear Information System (INIS)
Keefe, D.
1976-09-01
Successful acceleration of protons and other ions has been achieved experimentally in this decade by a number of different collective methods. The attainment of very high accelerating fields has been established although so far the acceleration distance has been confined to only a few centimeters. Efforts are in progress to understand the accelerating mechanisms in detail and, as a result, to devise ways of extending considerably the acceleration distance. A review is given of the current progress, expectations, and limitations of the different approaches
The Role of Civilians in Maintaining Military Equipment. Volume 2,
1985-12-01
Construcciones Aeronauticas. commonly referred to CASA, provides nearly $17.7 million in support of F-4 aircraft. (Note that although the F-4 was shown...COMPANY PREDOMINANT COSTLOCATION WORK ($000) British Aerospace U.K. F-111 18.619 Construcciones Spain F-4 17,697 Aeronauticas Hellenic Aerospace Greece J79
Accelerator technical design report for high-intensity proton accelerator facility project, J-PARC
Energy Technology Data Exchange (ETDEWEB)
NONE
2003-03-01
This report presents the detail of the technical design of the accelerators for the High-Intensity Proton Accelerator Facility Project, J-PARC. The accelerator complex comprises a 400-MeV room-temperature linac (600-MeV superconducting linac), 3-GeV rapid-cycling synchrotron (RCS), and a 50-GeV synchrotron (MR). The 400-MeV beam is injected to the RCS, being accelerated to 3 GEV. The 1-MW beam thus produced is guided to the Materials Life Science Experimental Facility, with both the pulsed spallation neutron source and muon source. A part of the beam is transported to the MR, which provides the 0.75-MW beam to either the Nuclear and Fundamental Particle Experimental Facility or the Neutrino Production Target. On the other hand, the beam accelerated to 600 MeV by the superconducting linac is used for the Nuclear Waster Transmutation Experiment. In this way, this facility is unique, being multipurpose one, including many new inventions and Research and Development Results. This report is based upon the accomplishments made by the Accelerator Group and others of the Project Team, which is organized on the basis of the Agreement between JAERI and KEK on the Construction and Research and Development of the High-Intensity Proton Accelerator Facility. (author)
2016-01-01
Introduction to accelerator physics The CERN Accelerator School: Introduction to Accelerator Physics, which should have taken place in Istanbul, Turkey, later this year has now been relocated to Budapest, Hungary. Further details regarding the new hotel and dates will be made available as soon as possible on a new Indico site at the end of May.
Swedish earthquakes and acceleration probabilities
International Nuclear Information System (INIS)
Slunga, R.
1979-03-01
A method to assign probabilities to ground accelerations for Swedish sites is described. As hardly any nearfield instrumental data is available we are left with the problem of interpreting macroseismic data in terms of acceleration. By theoretical wave propagation computations the relation between seismic strength of the earthquake, focal depth, distance and ground accelerations are calculated. We found that most Swedish earthquake of the area, the 1904 earthquake 100 km south of Oslo, is an exception and probably had a focal depth exceeding 25 km. For the nuclear power plant sites an annual probability of 10 -5 has been proposed as interesting. This probability gives ground accelerations in the range 5-20 % for the sites. This acceleration is for a free bedrock site. For consistency all acceleration results in this study are given for bedrock sites. When applicating our model to the 1904 earthquake and assuming the focal zone to be in the lower crust we get the epicentral acceleration of this earthquake to be 5-15 % g. The results above are based on an analyses of macrosismic data as relevant instrumental data is lacking. However, the macroseismic acceleration model deduced in this study gives epicentral ground acceleration of small Swedish earthquakes in agreement with existent distant instrumental data. (author)
Collective acceleration investigations with the ionization front accelerator
International Nuclear Information System (INIS)
Olson, C.L.; Poukey, J.W.; VanDevender, J.P.; Owyoung, A.; Pearlman, J.S.
1977-01-01
Part I of a three part program to demonstrate feasibility of the Ionization Front Accelerator (IFA) has been completed and is successful. Experiments describing intense relativistic electron beam (IREB) propagation in Cs are reported. The threshold pressure for electron beam ionization of Cs is found to agree with earlier theoretical predictions. These results experimentally establish Cs as a feasible working gas for the IFA. Numerical simulation results are also reported which demonstrate controlled potential well motion and collective ion acceleration with the IFA
CAS CERN Accelerator School: Fourth general accelerator physics course
International Nuclear Information System (INIS)
Turner, S.
1991-01-01
The fourth CERN Accelerator School (CAS) basic course on General Accelerator Physics was given at KFA, Juelich, from 17 to 28 September 1990. Its syllabus was based on the previous similar courses held at Gif-sur-Yvette in 1984, Aarhus 1986, and Salamanca 1988, and whose proceedings were published as CERN Reports 85-19, 87-10, and 89-05, respectively. However, certain topics were treated in a different way, improved or extended, while new subjects were introduced. All of these appear in the present proceedings, which include lectures or seminars on the history and applications of accelerators, phase space and emittance, chromaticity, beam-beam effects, synchrotron radiation, radiation damping, tune measurement, transition, electron cooling, the designs of superconducting magnets, ring lattices, conventional RF cavities and ring RF systems, and an introduction to cyclotrons. (orig.)
Enhanced efficiency of plasma acceleration in the laser-induced cavity pressure acceleration scheme
International Nuclear Information System (INIS)
Badziak, J; Rosiński, M; Jabłoński, S; Pisarczyk, T; Chodukowski, T; Parys, P; Rączka, P; Krousky, E; Ullschmied, J; Liska, R; Kucharik, M
2015-01-01
Among various methods for the acceleration of dense plasmas the mechanism called laser-induced cavity pressure acceleration (LICPA) is capable of achieving the highest energetic efficiency. In the LICPA scheme, a projectile placed in a cavity is accelerated along a guiding channel by the laser-induced thermal plasma pressure or by the radiation pressure of an intense laser radiation trapped in the cavity. This arrangement leads to a significant enhancement of the hydrodynamic or electromagnetic forces driving the projectile, relative to standard laser acceleration schemes. The aim of this paper is to review recent experimental and numerical works on LICPA with the emphasis on the acceleration of heavy plasma macroparticles and dense ion beams. The main experimental part concerns the research carried out at the kilojoule sub-nanosecond PALS laser facility in Prague. Our measurements performed at this facility, supported by advanced two-dimensional hydrodynamic simulations, have demonstrated that the LICPA accelerator working in the long-pulse hydrodynamic regime can be a highly efficient tool for the acceleration of heavy plasma macroparticles to hyper-velocities and the generation of ultra-high-pressure (>100 Mbar) shocks through the collision of the macroparticle with a solid target. The energetic efficiency of the macroparticle acceleration and the shock generation has been found to be significantly higher than that for other laser-based methods used so far. Using particle-in-cell simulations it is shown that the LICPA scheme is highly efficient also in the short-pulse high-intensity regime and, in particular, may be used for production of intense ion beams of multi-MeV to GeV ion energies with the energetic efficiency of tens of per cent, much higher than for conventional laser acceleration schemes. (paper)
CAS Accelerator Physics (RF for Accelerators) in Denmark
Barbara Strasser
2010-01-01
The CERN Accelerator School (CAS) and Aarhus University jointly organised a specialised course on RF for Accelerators, at the Ebeltoft Strand Hotel, Denmark from 8 to 17 June 2010. Caption The challenging programme focused on the introduction of the underlying theory, the study and the performance of the different components involved in RF systems, the RF gymnastics and RF measurements and diagnostics. This academic part was supplemented with three afternoons dedicated to practical hands-on exercises. The school was very successful, with 100 participants representing 25 nationalities. Feedback from the participants was extremely positive, praising the expertise and enthusiasm of the lecturers, as well as the high standard and excellent quality of their lectures. In addition to the academic programme, the participants were able to visit a small industrial exhibition organised by Aarhus University and take part in a one-day excursion consisting of a visit of the accelerators operated ...
High-energy cosmic-ray acceleration
Bustamante, M; de Paula, W; Duarte Chavez, J A; Gago, A M; Hakobyan, H; Jez, P; Monroy Montañez, J A; Ortiz Velasquez, A; Padilla Cabal, F; Pino Rozas, M; Rodriguez Patarroyo, D J; Romeo, G L; Saldaña-Salazar , U J; Velasquez, M; von Steinkirch, M
2010-01-01
We briefly review the basics of ultrahigh-energy cosmic-ray acceleration. The Hillas criterion is introduced as a geometrical criterion that must be fulfilled by potential acceleration sites, and energy losses are taken into account in order to obtain a more realistic scenario. The different available acceleration mechanisms are presented, with special emphasis on Fermi shock acceleration and its prediction of a power-law cosmic-ray energy spectrum. We conclude that first-order Fermi acceleration, though not entirely satisfactory, is the most promising mechanism for explaining the ultra-high-energy cosmic-ray flux.
Superconductivity and future accelerators
International Nuclear Information System (INIS)
Danby, G.T.; Jackson, J.W.
1963-01-01
For 50 years particle accelerators employing accelerating cavities and deflecting magnets have been developed at a prodigious rate. New accelerator concepts and hardware ensembles have yielded great improvements in performance and GeV/$. The great idea for collective acceleration resulting from intense auxiliary charged-particle beams or laser light may or may not be just around the corner. In its absence, superconductivity (SC) applied both to rf cavities and to magnets opened up the potential for very large accelerators without excessive energy consumption and with other economies, even with the cw operation desirable for colliding beams. HEP has aggressively pioneered this new technology: the Fermilab single ring 1 TeV accelerator - 2 TeV collider is near the testing stage. Brookhaven National Laboratory's high luminosity pp 2 ring 800 GeV CBA collider is well into construction. Other types of superconducting projects are in the planning stage with much background R and D accomplished. The next generation of hadron colliders under discussion involves perhaps a 20 TeV ring (or rings) with 40 TeV CM energy. This is a very large machine: even if the highest practical field B approx. 10T is used, the radius is 10x that of the Fermilab accelerator. An extreme effort to get maximum GeV/$ may be crucial even for serious consideration of funding
International Nuclear Information System (INIS)
Ramamurthi, S.S.
1991-01-01
The Accelerator Programme at the Centre for Advanced Technology (CAT), Indore, has very broad based concept under which all types of accelerators are to be taken up for design and fabrication. This centre will be housing a wide variety of accelerators to serve as a common facility for the universities, national laboratories in addition to laboratories under the Department of Atomic Energy. In the first phase of the programme, a series of electron accelerators are designed and fabricated. They are synchrotron radiation sources of 450 MeV (INDUS-I) and of 2 GeV (INDUS-II), microtron upto energy of 20 MeV, linear accelerator upto 20 MeV, and DC Accelerator for industrial irradiation upto 750 KeV and 20 KW. A proton accelerator of 300 MeV with 20 MeV linac injector is also designed. CAT is also developing a strong base for support technologies like ultra high vacuum, radio frequency and microwaves, DC pulsed and superconducting magnets, power supplies and controls etc. These technologies are very useful for other industrial applications also. To develop user groups to utilise INDUS-II synchrotron radiation source, a batch production of rotating Anode X-ray generators with power supplies has been initiated. So also, the sputter ion pumps, electron guns, turbo molecular pumps are brought into batch production. (author)
Energy Technology Data Exchange (ETDEWEB)
Popp, Antonia
2011-12-16
The experiments presented in this thesis study several aspects of electron acceleration in a laser-driven plasma wave. High-intensity lasers can efficiently drive a plasma wave that sustains electric fields on the order of 100 GV/m. Electrons that are trapped in this plasma wave can be accelerated to GeV-scale energies. As the accelerating fields in this scheme are 3-4 orders of magnitude higher than in conventional radio-frequency accelerators, the necessary acceleration distance can be reduced by the same factor, turning laser-wakefield acceleration (LWFA) into a promising compact, and potentially cheaper, alternative. However, laser-accelerated electron bunches have not yet reached the parameter standards of conventional accelerators. This work will help to gain better insight into the acceleration process and to optimize the electron bunch properties. The 25 fs, 1.8 J-pulses of the ATLAS laser at the Max-Planck-Institute of Quantum Optics were focused into a steady-state flow gas cell. This very reproducible and turbulence-free gas target allows for stable acceleration of electron bunches. Thus the sensitivity of electron parameters to subtle changes of the experimental setup could be determined with meaningful statistics. At optimized experimental parameters, electron bunches of {approx}50 pC total charge were accelerated to energies up to 450 MeV with a divergence of {approx}2 mrad FWHM. As, in a new design of the gas cell, its length can be varied from 2 to 14 mm, the electron bunch energy could be evaluated after different acceleration distances, at two different electron densities. From this evolution important acceleration parameters could be extracted. At an electron density of 6.43. 10{sup 18} cm{sup -3} the maximum electric field strength in the plasma wave was determined to be {approx}160 GV/m. The length after which the relativistic electrons outrun the accelerating phase of the electric field and are decelerated again, the so-called dephasing length
International Nuclear Information System (INIS)
Popp, Antonia
2011-01-01
The experiments presented in this thesis study several aspects of electron acceleration in a laser-driven plasma wave. High-intensity lasers can efficiently drive a plasma wave that sustains electric fields on the order of 100 GV/m. Electrons that are trapped in this plasma wave can be accelerated to GeV-scale energies. As the accelerating fields in this scheme are 3-4 orders of magnitude higher than in conventional radio-frequency accelerators, the necessary acceleration distance can be reduced by the same factor, turning laser-wakefield acceleration (LWFA) into a promising compact, and potentially cheaper, alternative. However, laser-accelerated electron bunches have not yet reached the parameter standards of conventional accelerators. This work will help to gain better insight into the acceleration process and to optimize the electron bunch properties. The 25 fs, 1.8 J-pulses of the ATLAS laser at the Max-Planck-Institute of Quantum Optics were focused into a steady-state flow gas cell. This very reproducible and turbulence-free gas target allows for stable acceleration of electron bunches. Thus the sensitivity of electron parameters to subtle changes of the experimental setup could be determined with meaningful statistics. At optimized experimental parameters, electron bunches of ∼50 pC total charge were accelerated to energies up to 450 MeV with a divergence of ∼2 mrad FWHM. As, in a new design of the gas cell, its length can be varied from 2 to 14 mm, the electron bunch energy could be evaluated after different acceleration distances, at two different electron densities. From this evolution important acceleration parameters could be extracted. At an electron density of 6.43. 10 18 cm -3 the maximum electric field strength in the plasma wave was determined to be ∼160 GV/m. The length after which the relativistic electrons outrun the accelerating phase of the electric field and are decelerated again, the so-called dephasing length, was found to be 4.9 mm
Energy Technology Data Exchange (ETDEWEB)
Vicuna V, H.G.; Picon C, C.; Zaharia B, M. [Instituto de Enfermedades Neoplasicas, Departamento de Radioterapia, Servicio de Fisica, Av. Angamos Este 2520, Lima 34 (Peru)
1998-12-31
In Radiotherapy Departments, where it is disposed of radiation units, these require of a control quality of their parameters as: dose in depth, real size, symmetry and levelling of the radiation field. In order to fulfil above it was designed and built a totally automated system for scanning and analysing the X-ray films or plates, which serve to have the parameter information to be measured. (Author)
Accelerators for atomic energy research
International Nuclear Information System (INIS)
Shibata, Tokushi
1999-01-01
The research and educational activities accomplished using accelerators for atomic energy research were studied. The studied items are research subjects, facility operation, the number of master theses and doctor theses on atomic energy research using accelerators and the future role of accelerators in atomic energy research. The strategy for promotion of the accelerator facility for atomic energy research is discussed. (author)
Electron accelerators and nanomaterials - a symbiosis
International Nuclear Information System (INIS)
Dixit, Kavita P.; Mittal, K.C.
2011-01-01
Electron Accelerators and Nanomaterials share a symbiotic relationship. While electron accelerators are fast emerging as popular tools in the field of nanomaterials, use of nanomaterials so developed for sub-systems of accelerators is being explored. Material damage studies, surface modification and lithography in the nanometre scale are some of the areas in which electron accelerators are being extensively used. New methods to characterize the structure of nanoparticles use intense X-ray sources, generated from electron accelerators. Enhancement of field emission properties of carbon nanotubes using electron accelerators is another important area that is being investigated. Research on nanomaterials for use in the field of accelerators is still in the laboratory stage. Yet, new trends and emerging technologies can effectively produce materials which can be of significant use in accelerators. Properties such as enhanced field emission can be put to use in cathodes of electron guns. Superconducting properties some materials may also be useful in accelerators. This paper focusses on the electron accelerators used for synthesis, characterization and property-enhancement of nanomaterials. The details of electron accelerators used for these applications will be highlighted. Some light will be thrown on properties of nano materials which can have potential use in accelerators. (author)
Accelerating Value Creation with Accelerators
DEFF Research Database (Denmark)
Jonsson, Eythor Ivar
2015-01-01
and developing the best business ideas and support the due diligence process. Even universities are noticing that the learning experience of the action learning approach is an effective way to develop capabilities and change cultures. Accelerators related to what has historically been associated...
Multi-beam linear accelerator EVT
Energy Technology Data Exchange (ETDEWEB)
Teryaev, Vladimir E., E-mail: vladimir_teryaev@mail.ru [Omega-P, Inc., New Haven, CT 06510 (United States); Kazakov, Sergey Yu. [Fermilab, Batavia, IL 60510 (United States); Hirshfield, Jay L. [Omega-P, Inc., New Haven, CT 06510 (United States); Yale University, New Haven, CT 06511 (United States)
2016-09-01
A novel electron multi-beam accelerator is presented. The accelerator, short-named EVT (Electron Voltage Transformer) belongs to the class of two-beam accelerators. It combines an RF generator and essentially an accelerator within the same vacuum envelope. Drive beam-lets and an accelerated beam are modulated in RF modulators and then bunches pass into an accelerating structure, comprising uncoupled with each other and inductive tuned cavities, where the energy transfer from the drive beams to the accelerated beam occurs. A phasing of bunches is solved by choice correspond distances between gaps of the adjacent cavities. Preliminary results of numerical simulations and the initial specification of EVT operating in S-band, with a 60 kV gun and generating a 2.7 A, 1.1 MV beam at its output is presented. A relatively high efficiency of 67% and high design average power suggest that EVT can find its use in industrial applications.
Software for virtual accelerator designing
International Nuclear Information System (INIS)
Kulabukhova, N.; Ivanov, A.; Korkhov, V.; Lazarev, A.
2012-01-01
The article discusses appropriate technologies for software implementation of the Virtual Accelerator. The Virtual Accelerator is considered as a set of services and tools enabling transparent execution of computational software for modeling beam dynamics in accelerators on distributed computing resources. Distributed storage and information processing facilities utilized by the Virtual Accelerator make use of the Service-Oriented Architecture (SOA) according to a cloud computing paradigm. Control system tool-kits (such as EPICS, TANGO), computing modules (including high-performance computing), realization of the GUI with existing frameworks and visualization of the data are discussed in the paper. The presented research consists of software analysis for realization of interaction between all levels of the Virtual Accelerator and some samples of middle-ware implementation. A set of the servers and clusters at St.-Petersburg State University form the infrastructure of the computing environment for Virtual Accelerator design. Usage of component-oriented technology for realization of Virtual Accelerator levels interaction is proposed. The article concludes with an overview and substantiation of a choice of technologies that will be used for design and implementation of the Virtual Accelerator. (authors)
Preaward Evaluation and Responsibility Determination of Foreign Contractors.
1988-12-01
3 Contractor Country Contract Number Bundesamt Fuer Wehrtechnik FRG DAJA3786C0326 Bundesamt Fuer Wehrtechnik FRG F6154686D0022 Construcciones ...Aeronauticas SA Spain F0960385C0006 Construcciones Aeronauticas SA Spain F4260086C6464 Daimler Benz AG FRG DAJA3778GOO11 Eaton Corp. FRG F0960382D0663
Aeronautical Engineering. A Continuing Bibliography with Indexes
1987-09-01
on three bearings, one being surrounded by a squeeze-film damper. This damper relies N87-22251 # Construcciones Aeronauticas S.A., Madrid (Spain). on...technology Prdcin~hg-pe oo os ihaKrh~f management p 501 N87-21894formula Construcciones Aeronauticas S.A., Madrid (Spain).Aeronuticl Research Labs. 500 N87
Ultra-high vacuum photoelectron linear accelerator
Yu, David U.L.; Luo, Yan
2013-07-16
An rf linear accelerator for producing an electron beam. The outer wall of the rf cavity of said linear accelerator being perforated to allow gas inside said rf cavity to flow to a pressure chamber surrounding said rf cavity and having means of ultra high vacuum pumping of the cathode of said rf linear accelerator. Said rf linear accelerator is used to accelerate polarized or unpolarized electrons produced by a photocathode, or to accelerate thermally heated electrons produced by a thermionic cathode, or to accelerate rf heated field emission electrons produced by a field emission cathode.
Energy Technology Data Exchange (ETDEWEB)
Church, M. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Edwards, H. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Harms, E. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Henderson, S. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Holmes, S. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Lumpkin, A. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Kephart, R. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Levedev, V. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Leibfritz, J. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Nagaitsev, S. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Piot, P. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Northern Illinois Univ., DeKalb, IL (United States); Prokop, C. [Northern Illinois Univ., DeKalb, IL (United States); Shiltsev, V. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Sun, Y. E. [Argonne National Lab. (ANL), Argonne, IL (United States); Valishev, A. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)
2013-10-01
Fermilab is the nation’s particle physics laboratory, supported by the DOE Office of High Energy Physics (OHEP). Fermilab is a world leader in accelerators, with a demonstrated track-record— spanning four decades—of excellence in accelerator science and technology. We describe the significant opportunity to complete, in a highly leveraged manner, a unique accelerator research facility that supports the broad strategic goals in accelerator science and technology within the OHEP. While the US accelerator-based HEP program is oriented toward the Intensity Frontier, which requires modern superconducting linear accelerators and advanced highintensity storage rings, there are no accelerator test facilities that support the accelerator science of the Intensity Frontier. Further, nearly all proposed future accelerators for Discovery Science will rely on superconducting radiofrequency (SRF) acceleration, yet there are no dedicated test facilities to study SRF capabilities for beam acceleration and manipulation in prototypic conditions. Finally, there are a wide range of experiments and research programs beyond particle physics that require the unique beam parameters that will only be available at Fermilab’s Advanced Superconducting Test Accelerator (ASTA). To address these needs we submit this proposal for an Accelerator R&D User Facility at ASTA. The ASTA program is based on the capability provided by an SRF linac (which provides electron beams from 50 MeV to nearly 1 GeV) and a small storage ring (with the ability to store either electrons or protons) to enable a broad range of beam-based experiments to study fundamental limitations to beam intensity and to develop transformative approaches to particle-beam generation, acceleration and manipulation which cannot be done elsewhere. It will also establish a unique resource for R&D towards Energy Frontier facilities and a test-bed for SRF accelerators and high brightness beam applications in support of the OHEP
Collinear wake field acceleration
International Nuclear Information System (INIS)
Bane, K.L.F.; Chen, P.; Wilson, P.B.
1985-04-01
In the Voss-Weiland scheme of wake field acceleration a high current, ring-shaped driving bunch is used to accelerate a low current beam following along on axis. In such a structure, the transformer ratio, i.e., the ratio of maximum voltage that can be gained by the on-axis beam and the voltage lost by the driving beam, can be large. In contrast, it has been observed that for an arrangement in which driving and driven bunches follow the same path, and where the current distribution of both bunches is gaussian, the transformer ratio is not normally greater than two. This paper explores some of the possibilities and limitations of a collinear acceleration scheme. In addition to its application to wake field acceleration in structures, this study is also of interest for the understanding of the plasma wake field accelerator. 11 refs., 4 figs
Accelerators in industrial and clinical practice
International Nuclear Information System (INIS)
Kulinich, S.
1983-01-01
Various possible accelerator applications in the USSR are given, namely the use of a linear electron accelerator in crack detection of thick-walled steel products, the use of accelerators in the radiation-chemical production of antimicrobial fabrics, the use of a pulsed electron accelerator for the disinfection of sewage waters, the use of accelerators for the treatment of tumors. Instruments have been developed on the basis of linear electron accelerators for the activation analysis of ores. (M.D.)
International Nuclear Information System (INIS)
Anon.
1995-01-01
When the Accelerator Conference, combined International High Energy and US Particle versions, held in Dallas in May, was initially scheduled, progress nearby for the US Superconducting Supercollider was high on the preliminary agenda. With the SSC voted down by Congress in October 1993, this was no longer the case. However the content of the meeting, in terms of both its deep implications for ambitious new projects and the breadth of its scope, showed that the worldwide particle accelerator field is far from being moribund. A traditional feature of such accelerator conferences is the multiplicity of parallel sessions. No one person can attend all sessions, so that delegates can follow completely different paths and emerge with totally different impressions. Despite this overload, and despite the SSC cancellation, the general picture is one of encouraging progress over a wide range of major new projects throughout the world. At the same time, spinoff from, and applications of, accelerators and accelerator technology are becoming increasingly important. Centrestage is now CERN's LHC proton-proton collider, where a test string of superconducting magnets is operating over long periods at the nominal LHC field of 8.36 tesla or more. The assignment of the underground areas in the existing 27- kilometre LEP tunnel is now quasidefinitive (see page 3). For CERN's existing big machine, the LEP electron-positron collider, ongoing work concentrates on boosting performance using improved optics and bunch trains. But the main objective is the LEP2 scheme using superconducting accelerating cavities to boost the beam energy (see page 6). After some initial teething problems, production and operation of these cavities appears to have been mastered, at least under test conditions. A highlight at CERN last year was the first run with lead ions (December 1994, page 15). Handling these heavy particles with systems originally designed for protons calls for ingenuity. The SPS
Energy Technology Data Exchange (ETDEWEB)
Anon.
1995-09-15
When the Accelerator Conference, combined International High Energy and US Particle versions, held in Dallas in May, was initially scheduled, progress nearby for the US Superconducting Supercollider was high on the preliminary agenda. With the SSC voted down by Congress in October 1993, this was no longer the case. However the content of the meeting, in terms of both its deep implications for ambitious new projects and the breadth of its scope, showed that the worldwide particle accelerator field is far from being moribund. A traditional feature of such accelerator conferences is the multiplicity of parallel sessions. No one person can attend all sessions, so that delegates can follow completely different paths and emerge with totally different impressions. Despite this overload, and despite the SSC cancellation, the general picture is one of encouraging progress over a wide range of major new projects throughout the world. At the same time, spinoff from, and applications of, accelerators and accelerator technology are becoming increasingly important. Centrestage is now CERN's LHC proton-proton collider, where a test string of superconducting magnets is operating over long periods at the nominal LHC field of 8.36 tesla or more. The assignment of the underground areas in the existing 27- kilometre LEP tunnel is now quasidefinitive (see page 3). For CERN's existing big machine, the LEP electron-positron collider, ongoing work concentrates on boosting performance using improved optics and bunch trains. But the main objective is the LEP2 scheme using superconducting accelerating cavities to boost the beam energy (see page 6). After some initial teething problems, production and operation of these cavities appears to have been mastered, at least under test conditions. A highlight at CERN last year was the first run with lead ions (December 1994, page 15). Handling these heavy particles with systems originally designed for protons calls for ingenuity. The SPS has managed
Pelletron ion accelerator facilities at Inter University Accelerator Centre
International Nuclear Information System (INIS)
Chopra, S.
2011-01-01
Inter University Accelerator Centre has two tandem ion accelerators, 15UD Pelletron and 5SDH-2 Pelletron, for use in different areas of research. Recently Accelerator Mass Spectrometry facility has also been added to to the existing experimental facilities of 15UD Pelletron. In these years many modifications and up gradations have been performed to 15UD Pelletron facility. A new MCSNICS ion source has been procured to produce high currents for AMS program. Two foils stripper assemblies ,one each before and after analyzing magnet, have also been added for producing higher charge state beams for LINAC and for experiments requiring higher charge states of accelerated beams. A new 1.7 MV Pelletron facility has also been recently installed at IUAC and it is equipped with RBS and Channelling experimental facility. There are two beam lines installed in the system and five more beam lines can be added to the system. A clean chemistry laboratory with all the modern facilities has also been developed at IUAC for the chemical processing of samples prior to the AMS measurements. The operational description of the Pelletron facilities, chemical processing of samples, methods of measurements and results of AMS measurements are being presented. (author)
Radiative damping in plasma-based accelerators
Directory of Open Access Journals (Sweden)
I. Yu. Kostyukov
2012-11-01
Full Text Available The electrons accelerated in a plasma-based accelerator undergo betatron oscillations and emit synchrotron radiation. The energy loss to synchrotron radiation may seriously affect electron acceleration. The electron dynamics under combined influence of the constant accelerating force and the classical radiation reaction force is studied. It is shown that electron acceleration cannot be limited by radiation reaction. If initially the accelerating force was stronger than the radiation reaction force, then the electron acceleration is unlimited. Otherwise the electron is decelerated by radiative damping up to a certain instant of time and then accelerated without limits. It is shown that regardless of the initial conditions the infinite-time asymptotic behavior of an electron is governed by a self-similar solution providing that the radiative damping becomes exactly equal to 2/3 of the accelerating force. The relative energy spread induced by the radiative damping decreases with time in the infinite-time limit. The multistage schemes operating in the asymptotic acceleration regime when electron dynamics is determined by the radiation reaction are discussed.
Advanced Accelerators for Medical Applications
Uesaka, Mitsuru; Koyama, Kazuyoshi
We review advanced accelerators for medical applications with respect to the following key technologies: (i) higher RF electron linear accelerator (hereafter “linac”); (ii) optimization of alignment for the proton linac, cyclotron and synchrotron; (iii) superconducting magnet; (iv) laser technology. Advanced accelerators for medical applications are categorized into two groups. The first group consists of compact medical linacs with high RF, cyclotrons and synchrotrons downsized by optimization of alignment and superconducting magnets. The second group comprises laser-based acceleration systems aimed of medical applications in the future. Laser plasma electron/ion accelerating systems for cancer therapy and laser dielectric accelerating systems for radiation biology are mentioned. Since the second group has important potential for a compact system, the current status of the established energy and intensity and of the required stability are given.
Acceleration of a compact torus
International Nuclear Information System (INIS)
Hartmann, C.W.; Eddleman, J.L.; Hammer, J.H.; Kusse, B.
1987-01-01
The authors report the first results of a study of acceleration of spheromak-type compact toruses in the RACE experiment (plasma Ring ACceleration Experiment). The RACE apparatus consists of (1) a magnetized, coaxial plasma gun 50 cm long, 35 cm OD, 20 cm ID, (2) 600 cm long coaxial acceleration electrodes 50 cm OD, 20 cm ID, (3) a 250 kJ electrolytic capacitor bank to drive the gun solenoid for initial magnetization, (4) a 200 kJ gun bank, (5) a 260 kJ accelerator bank, and (6) magnetic probes and other diagnostics, and vacuum apparatus. To outer acceleration electrode is an extension, at larger OD, of the gun outer electrode, and the inner acceleration electrode is supported and fed by a coaxial insert in the gun center electrode as shown
Accelerator shielding benchmark problems
International Nuclear Information System (INIS)
Hirayama, H.; Ban, S.; Nakamura, T.
1993-01-01
Accelerator shielding benchmark problems prepared by Working Group of Accelerator Shielding in the Research Committee on Radiation Behavior in the Atomic Energy Society of Japan were compiled by Radiation Safety Control Center of National Laboratory for High Energy Physics. Twenty-five accelerator shielding benchmark problems are presented for evaluating the calculational algorithm, the accuracy of computer codes and the nuclear data used in codes. (author)
Accelerator mass spectrometry programme at BARC-TIFR pelletron accelerator
International Nuclear Information System (INIS)
Surendran, P.; Shrivastava, A.; Gupta, A.K.; Nair, J.P.; Yadav, M.L.; Gore, J.A.; Sparrow, H.; Bhagwat, P.V.; Kailas, S.
2006-01-01
Accelerator based mass spectrometry (ABMs) is an ultra sensitive means of counting individual atoms having sufficiently long half life and available in small amount. The 14 U D Pelletron Accelerator is an ideal machine to carry out ABMs studies with heavy isotopes like 36 Cl and 129 I. Cosmogenic radio isotope 36 Cl is widely being detected using ABMs as it has got applications in ground water research, radioactive waste management, atmospheric 36 Cl transport mechanism studies of Arctic Alpine ice core etc. As a part of the ongoing ABMs programme at 14UD Pelletron Accelerator Facility at Mumbai, a segmented gas detector developed for identification of 36 Cl was tested for performance. Recently a beam chopper required for this measurement has been developed. Further progress made in this programme is discussed in this paper. (author)
CAS CERN Accelerator School third general accelerator physics course
International Nuclear Information System (INIS)
Turner, S.
1989-01-01
The general course on accelerator physics given in Salamanca, Spain, closely followed those organised by the CERN Accelerator School at Gif-sur-Yvette, Paris in 1984, and at Aarhus, Denmark in 1986 and whose proceedings were published as CERN Yellow Reports 85-19 (1985) and 87-10 (1987) respectively. However, certain topics were treated in a different way, improved or extended, while some new ones were introduced and it is all of these which are included in the present proceedings. The lectures include beam-cooling concepts, Liouville's theorem and emittance, emittance dilution in transfer lines, weak-betatron coupling, diagnostics, while the seminars are on positron and electron sources, linac structures and the LEP L3 experiment, together with industrial aspects of particle accelerators. Also included are errata and addenda to the Yellow Reports mentioned above. (orig.)
La implantacion del enfoque constructivista en el aula de ciencia: Estudio de caso multiple
Arroyo Betancourt, Luz I.
Esta investigacion estudia la implantacion del enfoque constructivista en tres aulas de ciencia del contexto puertorriqueno. Se auscultaron las practicas educativas que utilizan maestras consideradas constructivistas y la correspondencia de sus practicas educativas con los elementos esenciales de la didactica que proponen los teoricos de los planteamientos constructivistas. Se ausculto, ademas, a que vision del enfoque constructivista responden las expresiones de las maestras acerca de su practica educativa y como compara con su quehacer, a la luz de los elementos esenciales de las visiones constructivistas piagetiana, social y radical. Se utilizo el diseno de estudio descriptivo de caso multiple. El estudio se baso en entrevistas a profundidad, revision de documentos y observacion no participativa a la sala de clases. El contexto fueron tres escuelas publicas de la Region Educativa de San Juan, una elemental, una intermedia y una superior. Los resultados confirmaron que la transicion hacia el enfoque constructivista es un proceso que toma tiempo, dedicacion y la participacion en adiestramientos y readiestramientos acerca del nuevo enfoque. Las maestras coinciden en la mayoria de las practicas educativas que utilizan para implantar el enfoque constructivista de ensenanza y difieren en algunas debido, probablemente, a que han tenido que adaptarlas a los correspondientes niveles de ensenanza: elemental, intermedio y superior. Dos de las maestras planifican por conceptos generadores, mientras que una de ellas planifica siguiendo la guia que recibe del Departamento de Educacion. Difieren ademas, en el enfasis que confieren al inquirir cientifico. Con relacion a la correspondencia entre la vision manifestada por las maestras a la luz de las visiones piagetiana, social y radical, aparentemente, las preguntas del protocolo de entrevistas no lograron evocar la informacion con suficiente profundidad, por lo que la investigadora tuvo que inferir las visiones de las
Multicavity proton cyclotron accelerator
Directory of Open Access Journals (Sweden)
J. L. Hirshfield
2002-08-01
Full Text Available A mechanism for acceleration of protons is described, in which energy gain occurs near cyclotron resonance as protons drift through a sequence of rotating-mode TE_{111} cylindrical cavities in a strong nearly uniform axial magnetic field. Cavity resonance frequencies decrease in sequence from one another with a fixed frequency interval Δf between cavities, so that synchronism can be maintained between the rf fields and proton bunches injected at intervals of 1/Δf. An example is presented in which a 122 mA, 1 MeV proton beam is accelerated to 961 MeV using a cascade of eight cavities in an 8.1 T magnetic field, with the first cavity resonant at 120 MHz and with Δf=8 MHz. Average acceleration gradient exceeds 40 MV/m, average effective shunt impedance is 223 MΩ/m, but maximum surface field in the cavities does not exceed 7.2 MV/m. These features occur because protons make many orbital turns in each cavity and thus experience acceleration from each cavity field many times. Longitudinal and transverse stability appear to be intrinsic properties of the acceleration mechanism, and an example to illustrate this is presented. This acceleration concept could be developed into a proton accelerator for a high-power neutron spallation source, such as that required for transmutation of nuclear waste or driving a subcritical fission burner, provided a number of significant practical issues can be addressed.
Fixed-Target Electron Accelerators
International Nuclear Information System (INIS)
Brooks, William K.
2001-01-01
A tremendous amount of scientific insight has been garnered over the past half-century by using particle accelerators to study physical systems of sub-atomic dimensions. These giant instruments begin with particles at rest, then greatly increase their energy of motion, forming a narrow trajectory or beam of particles. In fixed-target accelerators, the particle beam impacts upon a stationary sample or target which contains or produces the sub-atomic system being studied. This is in distinction to colliders, where two beams are produced and are steered into each other so that their constituent particles can collide. The acceleration process always relies on the particle being accelerated having an electric charge; however, both the details of producing the beam and the classes of scientific investigations possible vary widely with the specific type of particle being accelerated. This article discusses fixed-target accelerators which produce beams of electrons, the lightest charged particle. As detailed in the report, the beam energy has a close connection with the size of the physical system studied. Here a useful unit of energy is a GeV, i.e., a giga electron-volt. (ne GeV, the energy an electron would have if accelerated through a billion volts, is equal to 1.6 x 10 -10 joules.) To study systems on a distance scale much smaller than an atomic nucleus requires beam energies ranging from a few GeV up to hundreds of GeV and more
Magnetic linear accelerator (MAGLAC) for hypervelocity acceleration in impact fusion (IF)
International Nuclear Information System (INIS)
Chen, K.W.
1980-01-01
This paper presents considerations on the design of a magnetic linear accelerator suitable as driver for impact fusion. We argue that the proposed approach offers an attractive option to accelerate macroscopic matter to centiluminal velocity suitable for fusion applications. The design goal is to attain a velocity approaching 200 km/sec. Recent results in suitable target design suggest that a velocity in the range of 40-100 km/sec might be sufficient to include fusion. An accelerator in this velocity range can be constructed with current-day technology. We present both design and practical engineering considerations. Future work are outlined and recommended. (orig.)
Christofilos, N.C.; Polk, I.J.
1959-02-17
Improvements in linear particle accelerators are described. A drift tube system for a linear ion accelerator reduces gap capacity between adjacent drift tube ends. This is accomplished by reducing the ratio of the diameter of the drift tube to the diameter of the resonant cavity. Concentration of magnetic field intensity at the longitudinal midpoint of the external sunface of each drift tube is reduced by increasing the external drift tube diameter at the longitudinal center region.
International Nuclear Information System (INIS)
Suzuki, Hiroshi; Enjoji, Hiroshi; Kawaguchi, Motoichi; Noritake, Toshiya
1984-01-01
A theoretical treatment of the acceleration of cluster ions for additional heating of fusion plasma using the trapping effect in an accelerated potential wave is described. The conceptual design of the accelerator is the same as that by Enjoji, and the potential wave used is sinusoidal. For simplicity, collisions among cluster ions and the resulting breakups are neglected. The masses of the cluster ions are specified to range from 100 m sub(D) to 1000 m sub(D) (m sub(D): mass of a deuterium atom). Theoretical treatment is carried out only for the injection velocity which coincides with the phase velocity of the applied wave at the entrance of the accelerator. An equation describing the rate for successful acceleration of ions with a certain mass is deduced for the continuous injection of cluster ions. Computation for a typical mass distribution shows that more than 70% of the injected particles are effectively accelerated. (author)
Development of heavy ion linear accelerators
International Nuclear Information System (INIS)
Bomko, V.A.; Khizhnyak, N.A.
1981-01-01
A review of the known heavy ion accelerators is given. It is stated that cyclic and linear accelerators are the most perspective ones in the energy range up to 10 MeV/nucleon according to universality in respect with the possibility of ion acceleration of the wide mass range. However, according to the accelerated beam intensity of the heavier ions the linear accelerators have considerable advantages over any other types of accelerators. The review of the known heavy ion linac structures permits to make the conclusion that a new modification of an accelerating structure of opposite pins excited on a H-wave is the most perspective one [ru
Overview of accelerators in medicine
International Nuclear Information System (INIS)
Lennox, A.J.
1993-06-01
Accelerators used for medicine include synchrotrons, cyclotrons, betatrons, microtrons, and electron, proton, and light ion linacs. Some accelerators which were formerly found only at physics laboratories are now being considered for use in hospital-based treatment and diagnostic facilities. This paper presents typical operating parameters for medical accelerators and gives specific examples of clinical applications for each type of accelerator, with emphasis on recent developments in the field
... uses microwave technology (similar to that used for radar) to accelerate electrons in a part of the accelerator called the "wave guide," then allows ... risk of accidental exposure is extremely low. top of page This page was ... No Please type your comment or suggestion into the following text ...
The Next Linear Collider Test Accelerator
International Nuclear Information System (INIS)
Ruth, R.D.; Adolphsen, C.; Bane, K.
1993-04-01
During the past several years, there has been tremendous progress the development of the RF system and accelerating structures for a Next Linear Collider (NLC). Developments include high-power klystrons, RF pulse compression systems and damped/detuned accelerator structures to reduce wakefields. In order to integrate these separate development efforts into an actual X-band accelerator capable of accelerating the electron beams necessary for an NLC, we are building an NLC Test Accelerator (NLCTA). The goal of the NLCTA is to bring together all elements of the entire accelerating system by constructing and reliably operating an engineered model of a high-gradient linac suitable for the NLC. The NLCTA will serve as a testbed as the design of the NLC evolves. In addition to testing the RF acceleration system, the NLCTA is designed to address many questions related to the dynamics of the beam during acceleration. In this paper, we will report oil the status of the design, component development, and construction of the NLC Test Accelerator
Accelerator applications in energy and security
Chou, Weiren
2015-01-01
As accelerator science and technology progressed over the past several decades, the accelerators themselves have undergone major improvements in multiple performance factors: beam energy, beam power, and beam brightness. As a consequence, accelerators have found applications in a wide range of fields in our life and in our society. The current volume is dedicated to applications in energy and security, two of the most important and urgent topics in today's world. This volume makes an effort to provide a review as complete and up to date as possible of this broad and challenging subject. It contains overviews on each of the two topics and a series of articles for in-depth discussions including heavy ion accelerator driven inertial fusion, linear accelerator-based ADS systems, circular accelerator-based ADS systems, accelerator-reactor interface, accelerators for fusion material testing, cargo inspection, proton radiography, compact neutron generators and detectors. It also has a review article on accelerator ...
Accelerators for Society - TIARA 2012 Test Infrastructure and Accelerator Research Area (in Polish)
Romaniuk, R S
2013-01-01
TIARA (Test Infrastructure and Accelerator Research Area - Preparatory Phae) is an European Collaboration of Accelerator Technology, which by running research projects, technical, networks and infrastructural has a duty to integrate the research and technical communities and infrastructures in the global scale of Europe. The Collaboration gathers all research centers with large accelerator infrastructures. Other ones, like universities, are affiliated as associate members. TIARA-PP (preparatory phase) is an European infrastructural project run by this Consortium and realized inside EU-FP7. The paper presents a general overview of TIARA activities, with an introduction containing a portrait of contemporary accelerator technology and a digest of its applications in modern society.
Standing wave accelerating structures
International Nuclear Information System (INIS)
Zavadtsev, A.A.; Zverev, B.V.; Sobepin, N.P.
1984-01-01
Accelerating ELA structures are considered and chosen for applied purposes of special designation. Accelerating structures with the standing wave are considered most effective for small size ELA. Designs and results of experimental investigation of two new accelerating structures are described. These are structures of the ''ring'' type with a decreased number of excitinq oscillation types and strucuture with transverse rods with a twice smaller transverse size as compared with the biperiodical structure with internal connection resonators. The accelerating biperiodical structures of the conventional type by the fact that the whole structure is not a linear chain of connected resonators, but a ring one. Model tests have shown that the homogeneous structure with transverse rods (STR) at the frequency of 2.8 GHz in the regime of the standing wave has an effective shunt resistance equalling 23 MOhm/m. It is shown that the small transverse size of biperiodic STR makes its application in logging linear electron accelerators
A periodic plasma waveguide accelerator
International Nuclear Information System (INIS)
Cole, F.T.
1985-01-01
The increasing cost of synchrotrons and storage rings has given new interest in the search for new methods of acceleration. The primary goal of this search is very large accelerating fields, because the cost of an accelerator to reach TeV energies is dominated by costs that scale with length. Very large electric fields are possible in plasmas and in lasers and many geometries are being studied that make use of plasmas, lasers, or combinations of them. In a plasma accelerator, the plasma can have several different functions. It may act as a medium for the propagation of accelerating electric-field waves. In addition, these waves may also act as a source of the energy needed to accelerate particles. Accelerators using various waves in plasmas have been built and studied in many laboratories. The device proposed here is an attempt to separate the two functions of providing a medium and providing an energy source. A relatively low-energy electron beam is used as a non-neutral plasma only to make a slow-wave medium for the propagation of an externally generated wave. The wave is a TM electromagnetic wave and the device may be thought of as a conventional electron linear accelerator with the evacuated volume and metallic envelope replaced by the electron beam. A separate second beam, which may be electrons or heavier particles, is accelerated. The application in mind here is a single-pass collider
Converging-barrel plasma accelerator
International Nuclear Information System (INIS)
Paine, T.O.
1971-01-01
The invention comprises a device for generating and accelerating plasma to extremely high velocity, while focusing the plasma to a decreasing cross section for attaining a very dense high-velocity plasma burst capable of causing nuclear fusion reactions. A converging coaxial accelerator-electrode configuration is employed with ''high-pressure'' gas injection in controlled amounts to achieve acceleration by deflagration and focusing by the shaped electromagnetic fields. (U.S.)
CONFERENCE: Computers and accelerators
Energy Technology Data Exchange (ETDEWEB)
Anon.
1984-01-15
In September of last year a Conference on 'Computers in Accelerator Design and Operation' was held in West Berlin attracting some 160 specialists including many from outside Europe. It was a Europhysics Conference, organized by the Hahn-Meitner Institute with Roman Zelazny as Conference Chairman, postponed from an earlier intended venue in Warsaw. The aim was to bring together specialists in the fields of accelerator design, computer control and accelerator operation.
Acceleration of particles in plasmas
CERN. Geneva
2007-01-01
The accelerating fields in radio-frequency accelerators are limited to roughly 100 MV/m due to material breakdown which occurs on the walls of the structure. In contrast, a plasma, being already ionized, can support electric fields in excess of 100 GV/m. Such high accelerating gradients hold the promise of compact particle accelerators. Plasma acceleration has been an emerging and fast growing field of research in the past two decades. In this series of lectures, we will review the principles of plasma acceleration. We will see how relativistic plasma waves can be excited using an ultra-intense laser or using a particle beam. We will see how these plasma waves can be used to accelerate electrons to high energy in short distances. Throughout the lectures, we will also review recent experimental results. Current laser-plasma experiments throughout the world have shown that monoenergetic electron beams from 100 MeV to 1 GeV can be obtained in distances ranging from the millimetre to the centimetre. Experiments a...
Charged particle accelerators for practice
International Nuclear Information System (INIS)
Arzumanov, A.A.
1988-01-01
Characteristics of some accelerators operating in the world are given, capabilities of accelerator technique are demonstrated. Examples of wide application of accelerators in radiation-chemical technology as well as for defectoscopy of massive metal products and impurity ion implantation when producing semiconductor elements are presented. Works on nuclear filter production are characterized by high efficiency. Wide application of synchrotron radiation is described. Various accelerators can be applied during element analysis in geology, metallurgy, ecology. Application of accelerators ''in particular, cyclotrons for radioisotope production as well as in radiotherapy in medicine appears to be important. An isochronous cyclotron with controlled ion energy, at which applied works concerning a number of considered trends in the field of radiation physics and radiation physical metallurgy, element analysis, radiation resistance of electronic circuits and components are conducted, is in operation at the IYaPh of the Kazakh Academy of Sciences. Production of tallium-201 for cardiologic invstigations deserves a special attention. An electrostatic heavy ion accelerator which allows one to produce the beams of accelerated ions of elements from hydrogen to uranium is under commissioning
Particle acceleration in pulsar magnetospheres
International Nuclear Information System (INIS)
Baker, K.B.
1978-10-01
The structure of pulsar magnetospheres and the acceleration mechanism for charged particles in the magnetosphere was studied, using a pulsar model which required large acceleration of the particles near the surface of the star. A theorem was developed which showed that particle acceleration cannot be expected when the angle between the magnetic field lines and the rotation axis is constant (e.g. radial field lines). If this angle is not constant, however, acceleration must occur. The more realistic model of an axisymmetric neutron star with a strong dipole magnetic field aligned with the rotation axis was investigated. In this case, acceleration occurred at large distances from the surface of the star. The magnitude of the current can be determined using the model presented. In the case of nonaxisymmetric systems, the acceleration is expected to occur nearer to the surface of the star
Physics design of an accelerator for an accelerator-driven subcritical system
Directory of Open Access Journals (Sweden)
Zhihui Li
2013-08-01
Full Text Available An accelerator-driven subcritical system (ADS program was launched in China in 2011, which aims to design and build an ADS demonstration facility with the capability of more than 1000 MW thermal power in multiple phases lasting about 20 years. The driver linac is defined to be 1.5 GeV in energy, 10 mA in current and in cw operation mode. To meet the extremely high reliability and availability, the linac is designed with much installed margin and fault tolerance, including hot-spare injectors and local compensation method for key element failures. The accelerator complex consists of two parallel 10-MeV injectors, a joint medium-energy beam transport line, a main linac, and a high-energy beam transport line. The superconducting acceleration structures are employed except for the radio frequency quadrupole accelerators (RFQs which are at room temperature. The general design considerations and the beam dynamics design of the driver linac complex are presented here.
International Nuclear Information System (INIS)
Bartholomew, G.A.; Fraser, J.S.; Garvey, P.M.
1978-10-01
The principal components and functions of an accelerator breeder are described. The role of the accelerator breeder as a possible long-term fissile production support facility for CANDU (Canada Deuterium Uranium) thorium advanced fuel cycles and the Canadian research and development program leading to such a facility are outlined. (author)
Van Atta, C.M.; Beringer, R.; Smith, L.
1959-01-01
A linear accelerator of heavy ions is described. The basic contributions of the invention consist of a method and apparatus for obtaining high energy particles of an element with an increased charge-to-mass ratio. The method comprises the steps of ionizing the atoms of an element, accelerating the resultant ions to an energy substantially equal to one Mev per nucleon, stripping orbital electrons from the accelerated ions by passing the ions through a curtain of elemental vapor disposed transversely of the path of the ions to provide a second charge-to-mass ratio, and finally accelerating the resultant stripped ions to a final energy of at least ten Mev per nucleon.
Advances in electrostatic accelerators
International Nuclear Information System (INIS)
Wegner, H.E.
1975-01-01
Advances in the design and performance of electrostatic accelerators since 1969 are reviewed with special emphasis on the ''forefront'' accelerators that are currently leading in voltage capability. A comparison of the acceleration tube design offered by the National Electrostatics Corporation and the High Voltage Engineering Corporation is also made. Other methods of increasing heavy ion energy by means of dual foil stripping are discussed as well as the performance of a newly developed sputter ion source for the production of negative heavy ions with reliability and flexibility that greatly exceeds all other present systems. Finally, new developments in terms of both booster systems and very high voltage electrostatic accelerators (25 to 60 MV) are discussed. (U.S.)
High-energy cosmic-ray acceleration
Bustamante, M; Carrillo Montoya, G; de Paula, W; Duarte Chavez, J A; Gago, A M; Hakobyan, H; Jez, P; Monroy Montañez, J A; Ortiz Velasquez, A; Padilla Cabal, F; Pino Rozas, M; Rodriguez Patarroyo, D J; Romeo, G L; Saldaña-Salazar , U J; Velasquez, M
2010-01-01
We briefly review the basics of ultrahigh-energy cosmic-ray acceleration. The Hillas criterion is introduced as a geometrical criterion that must be fulfilled by potential acceleration sites, and energy losses are taken into account in order to obtain a more realistic scenario. The different available acceleration mechanisms are presented, with special emphasis on Fermi shock acceleration and its prediction of a power-law cosmic-ray energy spectrum. We conclude that first-order Fermi accelera...
Muon acceleration in cosmic-ray sources
International Nuclear Information System (INIS)
Klein, Spencer R.; Mikkelsen, Rune E.; Becker Tjus, Julia
2013-01-01
Many models of ultra-high energy cosmic-ray production involve acceleration in linear accelerators located in gamma-ray bursts, magnetars, or other sources. These transient sources have short lifetimes, which necessitate very high accelerating gradients, up to 10 13 keV cm –1 . At gradients above 1.6 keV cm –1 , muons produced by hadronic interactions undergo significant acceleration before they decay. This muon acceleration hardens the neutrino energy spectrum and greatly increases the high-energy neutrino flux. Using the IceCube high-energy diffuse neutrino flux limits, we set two-dimensional limits on the source opacity and matter density, as a function of accelerating gradient. These limits put strong constraints on different models of particle acceleration, particularly those based on plasma wake-field acceleration, and limit models for sources like gamma-ray bursts and magnetars.
Status of accelerator development at Fermilab
International Nuclear Information System (INIS)
Owen, C.W.
1976-01-01
The Fermilab accelerator is comprised of four major systems: the high-energy beam-extraction and switching system, the main accelerator (main ring), the booster, and the linear accelerator. The Fermilab accelerator produces accelerated beams for a vigorous international high-energy physics program. The basic design features and operation for high-energy physics have been described a number of times in the past. A report is given which, for the most part, discusses in detail only those features that are particularly significant in increasing the usefulness of the accelerator as a tool for high-energy physics
International Nuclear Information System (INIS)
Kumar, Pankaj; Bohra, Archna; Ojha, S.; Gargari, S.; Joshi, R.; Roonwal, G.S.; Chopra, S.; Pattanaik, J.K.; Balakrishnan, S.
2011-01-01
Accelerator Mass Spectrometry (AMS) facility at Inter-University Accelerator Centre (IUAC) is developed by upgrading its existing 15UD Pelletron accelerator. Since last two decades Pelletron is mainly used for nuclear physics, materials science, atomic physics, radiation biology and accelerator mass spectrometry is recent development. In addition, a chemistry laboratory in clean room for the chemical processing of samples for AMS studies has also been established. At present the AMS facility is used for 10 Be, 26 Al measurements and soon other long lived radio-isotopes will also be used
The Accelerator Markup Language and the Universal Accelerator Parser
International Nuclear Information System (INIS)
Sagan, D.; Forster, M.; Cornell U., LNS; Bates, D.A.; LBL, Berkeley; Wolski, A.; Liverpool U.; Cockcroft Inst. Accel. Sci. Tech.; Schmidt, F.; CERN; Walker, N.J.; DESY; Larrieu, T.; Roblin, Y.; Jefferson Lab; Pelaia, T.; Oak Ridge; Tenenbaum, P.; Woodley, M.; SLAC; Reiche, S.; UCLA
2006-01-01
A major obstacle to collaboration on accelerator projects has been the sharing of lattice description files between modeling codes. To address this problem, a lattice description format called Accelerator Markup Language (AML) has been created. AML is based upon the standard eXtensible Markup Language (XML) format; this provides the flexibility for AML to be easily extended to satisfy changing requirements. In conjunction with AML, a software library, called the Universal Accelerator Parser (UAP), is being developed to speed the integration of AML into any program. The UAP is structured to make it relatively straightforward (by giving appropriate specifications) to read and write lattice files in any format. This will allow programs that use the UAP code to read a variety of different file formats. Additionally, this will greatly simplify conversion of files from one format to another. Currently, besides AML, the UAP supports the MAD lattice format
Dusty-Plasma Particle Accelerator
Foster, John E.
2005-01-01
A dusty-plasma apparatus is being investigated as means of accelerating nanometer- and micrometer-sized particles. Applications for the dusty-plasma particle accelerators fall into two classes: Simulation of a variety of rapidly moving dust particles and micrometeoroids in outer-space environments that include micrometeoroid streams, comet tails, planetary rings, and nebulae and Deposition or implantation of nanoparticles on substrates for diverse industrial purposes that could include hardening, increasing thermal insulation, altering optical properties, and/or increasing permittivities of substrate materials. Relative to prior apparatuses used for similar applications, dusty-plasma particle accelerators offer such potential advantages as smaller size, lower cost, less complexity, and increased particle flux densities. A dusty-plasma particle accelerator exploits the fact that an isolated particle immersed in plasma acquires a net electric charge that depends on the relative mobilities of electrons and ions. Typically, a particle that is immersed in a low-temperature, partially ionized gas, wherein the average kinetic energy of electrons exceeds that of ions, causes the particle to become negatively charged. The particle can then be accelerated by applying an appropriate electric field. A dusty-plasma particle accelerator (see figure) includes a plasma source such as a radio-frequency induction discharge apparatus containing (1) a shallow cup with a biasable electrode to hold the particles to be accelerated and (2) a holder for the substrate on which the particles are to impinge. Depending on the specific design, a pair of electrostatic-acceleration grids between the substrate and discharge plasma can be used to both collimate and further accelerate particles exiting the particle holder. Once exposed to the discharge plasma, the particles in the cup quickly acquire a negative charge. Application of a negative voltage pulse to the biasable electrode results in the
Energy Technology Data Exchange (ETDEWEB)
Anon.
1986-01-15
The CERN Accelerator School (CAS) offers a regular course on general accelerator physics. The first basic course was given in September 1984 at Orsay, France, and last September the advanced course was jointly organized by CAS, Oxford's Nuclear Physics Laboratory and the Rutherford Appleton Laboratory, and held at The Queen's College, Oxford.
Introduction to Microwave Linear [Accelerators
Energy Technology Data Exchange (ETDEWEB)
Whittum, David H
1999-01-04
The elements of microwave linear accelerators are introduced starting with the principles of acceleration and accelerating structures. Considerations for microwave structure modeling and design are developed from an elementary point of view. Basic elements of microwave electronics are described for application to the accelerator circuit and instrumentation. Concepts of beam physics are explored together with examples of common beamline instruments. Charged particle optics and lattice diagnostics are introduced. Considerations for fixed-target and colliding-beam experimentation are summarized.
International Nuclear Information System (INIS)
Smith, David M D; Onnela, Jukka-Pekka; Johnson, Neil F
2007-01-01
Evolving out-of-equilibrium networks have been under intense scrutiny recently. In many real-world settings the number of links added per new node is not constant but depends on the time at which the node is introduced in the system. This simple idea gives rise to the concept of accelerating networks, for which we review an existing definition and-after finding it somewhat constrictive-offer a new definition. The new definition provided here views network acceleration as a time dependent property of a given system as opposed to being a property of the specific algorithm applied to grow the network. The definition also covers both unweighted and weighted networks. As time-stamped network data becomes increasingly available, the proposed measures may be easily applied to such empirical datasets. As a simple case study we apply the concepts to study the evolution of three different instances of Wikipedia, namely, those in English, German, and Japanese, and find that the networks undergo different acceleration regimes in their evolution
Electrostatic accelerators fundamentals and applications
2005-01-01
Electrostatic accelerators are an important and widespread subgroup within the broad spectrum of modern, large particle acceleration devices. They are specifically designed for applications that require high-quality ion beams in terms of energy stability and emittance at comparatively low energies (a few MeV). Their ability to accelerate virtually any kind of ion over a continuously tunable range of energies make them a highly versatile tool for investigations in many research fields including, but not limited to, atomic and nuclear spectroscopy, heavy ion reactions, accelerator mass spectroscopy as well as ion-beam analysis and modification. The book is divided into three parts. The first part concisely introduces the field of accelerator technology and techniques that emphasize their major modern applications. The second part treats the electrostatic accelerator per se: its construction and operational principles as well as its maintenance. The third part covers all relevant applications in which electrosta...
Tandem electrostatic accelerators for BNCT
International Nuclear Information System (INIS)
Ma, J.C.
1994-01-01
The development of boron neutron capture therapy (BNCT) into a viable therapeutic modality will depend, in part, on the availability of suitable neutron sources compatible with installation in a hospital environment. Low-energy accelerator-based intense neutron sources, using electrostatic or radio frequency quadrupole proton accelerators have been suggested for this purpose and are underdevelopment at several laboratories. New advances in tandem electrostatic accelerator technology now allow acceleration of the multi-milliampere proton beams required to produce therapeutic neutron fluxes for BNCT. The relatively compact size, low weight and high power efficiency of these machines make them particularly attractive for installation in a clinical or research facility. The authors will describe the limitations on ion beam current and available neutron flux from tandem accelerators relative to the requirements for BNCT research and therapy. Preliminary designs and shielding requirements for a tandern accelerator-based BNCT research facility will also be presented
Proceedings of CAS - CERN Accelerator School: Course on Superconductivity for Accelerators
Energy Technology Data Exchange (ETDEWEB)
Bailey, R [European Organization for Nuclear Research, Geneva (Switzerland)
2014-07-01
These proceedings collate lectures given at the twenty-seventh specialized course organised by the CERN Accelerator School (CAS). The course was held at the Ettore Majorana Foundation and Centre for Scientific Culture (EMFCSC) in Erice, Italy, from 24 April to 4 May 2013. Following recapitulation lectures on basic accelerator physics and superconductivity, the course covered topics related to the design, production and operation of superconducting RF systems and superconducting magnets for accelerators. The participants pursued one of six case studies in order to get ’hands-on’ experience of the issues connected with the design of superconducting systems. A series of topical seminars completed the programme.
Ion sources for electrostatic accelerators
International Nuclear Information System (INIS)
Hellborg, R.
1998-01-01
Maybe the most important part of an electrostatic accelerator system, and also often the most tricky part is the ion source. There has been a rapid growth in activity in ion-source research and development during the last two to three decades. Some of these developments have also been of benefit to electrostatic accelerator users. In this report some of the different types of ion sources used in electrostatic accelerators are described. The list is not complete but more an overview of some of the more commonly used sources. The description is divided into two groups; positive ion sources for single stage electrostatic accelerators and negative ion sources for two stages (i.e. tandem) accelerators
CAS CERN Accelerator School. 5. Advanced accelerator physics course. Proceedings. Vol. 2
International Nuclear Information System (INIS)
Turner, S.
1995-01-01
The fifth CERN Accelerator School (CAS) advanced course on Accelerator Physics was given at the Paradise Hotel, Rhodes, Greece from 20 September to 1 October 1993. Its syllabus was based on the previous similar courses held at Oxford 1985, Berlin 1987, Uppsala 1989 and Noordwijkerhout 1991, and whose proceedings were published as CERN Reports 97-03, 89-01, 90-04 and 92-01, respectively. The present volumes are intended to replace and to bring up to date all the material in earlier publications. They contain not only all the lectures given in the Rhodes course but a number of important contributions to previous courses which are thought to be essential for a complete understanding of all aspects of the design and construction of particle accelerators at an advanced level. They include sections on Hamiltonian equations and accelerator optics, chromaticity and dynamic beam aperture, particle tracking, the kinetic theory, longitudinal beam optics, coherent instabilities, beam-beam dynamics, intra-beam scattering, beam cooling, Schottky noise, beam radiation, neutralisation, beam polarisation, radio-frequency quadrupoles, as well as chapters on space charge, superconducting magnets, crystal bending, beam-beam measurement and accelerator medical applications. (orig.)
CAS CERN Accelerator School. 5. Advanced accelerator physics course. Proceedings. Vol. 1
Energy Technology Data Exchange (ETDEWEB)
Turner, S [ed.
1995-11-22
The fifth CERN Accelerator School (CAS) advanced course on Accelerator Physics was given at the Paradise Hotel, Rhodes, Greece from 20 September to 1 October 1993. Its syllabus was based on the previous similar courses held at Oxford 1985, Berlin 1987, Uppsala 1989 and Noordwijkerhout 1991, and whose proceedings were published as CERN Reports 87-03, 89-01, 90-04 and 92-01, respectively. The present volumes are intended to replace and to bring up to date all the material in earlier publications. They contain not only all the lectures given in the Rhodes course but a number of important contributions to previous courses which are thought to be essential for a complete understanding of all aspects of the design and construction of particle accelerators at an advanced level. They include sections on Hamiltonian equations and accelerator optics, chromaticity and dynamic beam aperture, particle tracking, the kinetic theory, longitudinal beam optics, coherent instabilities, beam-beam dynamics, intra-beam scattering, beam cooling, Schottky noise, beam radiation, neutralisation, beam polarisation, radio-frequency quadrupoles, as well as chapters on space charge, superconducting magnets, crystal bending, beam-beam measurement and accelerator medical applications. (orig.).
CAS CERN Accelerator School. 5. Advanced accelerator physics course. Proceedings. Vol. 1
International Nuclear Information System (INIS)
Turner, S.
1995-01-01
The fifth CERN Accelerator School (CAS) advanced course on Accelerator Physics was given at the Paradise Hotel, Rhodes, Greece from 20 September to 1 October 1993. Its syllabus was based on the previous similar courses held at Oxford 1985, Berlin 1987, Uppsala 1989 and Noordwijkerhout 1991, and whose proceedings were published as CERN Reports 87-03, 89-01, 90-04 and 92-01, respectively. The present volumes are intended to replace and to bring up to date all the material in earlier publications. They contain not only all the lectures given in the Rhodes course but a number of important contributions to previous courses which are thought to be essential for a complete understanding of all aspects of the design and construction of particle accelerators at an advanced level. They include sections on Hamiltonian equations and accelerator optics, chromaticity and dynamic beam aperture, particle tracking, the kinetic theory, longitudinal beam optics, coherent instabilities, beam-beam dynamics, intra-beam scattering, beam cooling, Schottky noise, beam radiation, neutralisation, beam polarisation, radio-frequency quadrupoles, as well as chapters on space charge, superconducting magnets, crystal bending, beam-beam measurement and accelerator medical applications. (orig.)
CAS CERN Accelerator School. 5. Advanced accelerator physics course. Proceedings. Vol. 2
Energy Technology Data Exchange (ETDEWEB)
Turner, S [ed.
1995-11-22
The fifth CERN Accelerator School (CAS) advanced course on Accelerator Physics was given at the Paradise Hotel, Rhodes, Greece from 20 September to 1 October 1993. Its syllabus was based on the previous similar courses held at Oxford 1985, Berlin 1987, Uppsala 1989 and Noordwijkerhout 1991, and whose proceedings were published as CERN Reports 97-03, 89-01, 90-04 and 92-01, respectively. The present volumes are intended to replace and to bring up to date all the material in earlier publications. They contain not only all the lectures given in the Rhodes course but a number of important contributions to previous courses which are thought to be essential for a complete understanding of all aspects of the design and construction of particle accelerators at an advanced level. They include sections on Hamiltonian equations and accelerator optics, chromaticity and dynamic beam aperture, particle tracking, the kinetic theory, longitudinal beam optics, coherent instabilities, beam-beam dynamics, intra-beam scattering, beam cooling, Schottky noise, beam radiation, neutralisation, beam polarisation, radio-frequency quadrupoles, as well as chapters on space charge, superconducting magnets, crystal bending, beam-beam measurement and accelerator medical applications. (orig.).
Accelerator mass spectrometry programme at BARC-TIFR pelletron accelerator. PD-1-2
International Nuclear Information System (INIS)
Bhagwat, P.V.
2007-01-01
Accelerator mass spectrometry (AMS) is an ultra sensitive means of counting individual atoms having sufficiently long half-life and available in small amount. The 14 UD Pelletron Accelerator is an ideal machine to carry out AMS studies with heavy isotopes like 36 Cl and 129 I. Cosmogenic radioisotope 36 Cl is widely being detected using AMS as it has got applications in ground water research, radioactive waste management, atmospheric 36 Cl transport mechanism studies of Arctic Alpine ice core etc . The AMS programme at the 14 UD Mumbai Pelletron Accelerator has taken off with the installation of the state of the art Terminal Potential Stabilizer setup and operation of the accelerator in Generating Volt Meter (GVM) mode. Feasibility studies have been carried out for detection/identification of 14 C from a charcoal sample and 3 He in natural Helium. As the primary interest of AMS programme at Mumbai Pelletron Accelerator is related to the cosmogenic nuclei, 36 Cl and 129 I, a segmented gas detector developed for identification of 36 Cl was tested for performance. Recently a beam chopper required for this measurement has also been developed
Theoretical problems in accelerator physics
International Nuclear Information System (INIS)
1992-01-01
This report discusses the following research on accelerators: computational methods; higher order mode suppression in accelerators structures; overmoded waveguide components and application to SLED II and power transport; rf sources; accelerator cavity design for a B factory asymmetric collider; and photonic band gap cavities
Joshi, C.
2012-12-01
The first Advanced Acceleration of Particles-AAC-Workshop (actually named Laser Acceleration of Particles Workshop) was held at Los Alamos in January 1982. The workshop lasted a week and divided all the acceleration techniques into four categories: near field, far field, media, and vacuum. Basic theorems of particle acceleration were postulated (later proven) and specific experiments based on the four categories were formulated. This landmark workshop led to the formation of the advanced accelerator R&D program in the HEP office of the DOE that supports advanced accelerator research to this day. Two major new user facilities at Argonne and Brookhaven and several more directed experimental efforts were built to explore the advanced particle acceleration schemes. It is not an exaggeration to say that the intellectual breadth and excitement provided by the many groups who entered this new field provided the needed vitality to then recently formed APS Division of Beams and the new online journal Physical Review Special Topics-Accelerators and Beams. On this 30th anniversary of the AAC Workshops, it is worthwhile to look back at the legacy of the first Workshop at Los Alamos and the fine groundwork it laid for the field of advanced accelerator concepts that continues to flourish to this day.
Several problems in accelerator shielding study
International Nuclear Information System (INIS)
Nakamura, Takashi; Hirayama, Hideo; Ban, Shuichi.
1980-01-01
Recently, the utilization of accelerators has increased rapidly, and the increase of accelerating energy and beam intensity is also remarkable. The studies on accelerator shielding have become important, because the amount of radiation emitted from accelerators increased, the regulation of the dose of environmental radiation was tightened, and the cost of constructing shielding rose. As the plans of constructing large accelerators have been made successively, the survey on the present state and the problems of the studies on accelerator shielding was carried out. Accelerators are classified into electron accelerators and proton accelerators in view of the studies on shielding. In order to start the studies on accelerator shielding, first, the preparation of the cross section data is indispensable. The cross sections for generating Bremsstrahlung, photonuclear reactions generating neutrons, generation of neutrons by hadrons, nuclear reaction of neutrons and generation of gamma-ray by hadrons are described. The generation of neutrons and gamma-ray as the problems of thick targets is explained. The shielding problems are complex and diversified, but in this paper, the studies on the shielding, by which basic data are obtainable, are taken up, such as beam damping and side wall shielding. As for residual radioactivity, main nuclides and the difference of residual radioactivity according to substances have been studied. (J.P.N.)
Teleportation with Multiple Accelerated Partners
International Nuclear Information System (INIS)
Sagheer, A.; Hamdoun, H.; Metwally, N.
2015-01-01
As the current revolution in communication is underway, quantum teleportation can increase the level of security in quantum communication applications. In this paper, we present a quantum teleportation procedure that capable to teleport either accelerated or non-accelerated information through different quantum channels. These quantum channels are based on accelerated multi-qubit states, where each qubit of each of these channels represents a partner. Namely, these states are the W state, Greenberger–Horne–Zeilinger (GHZ) state, and the GHZ-like state. Here, we show that the fidelity of teleporting accelerated information is higher than the fidelity of teleporting non-accelerated information, both through a quantum channel that is based on accelerated state. Also, the comparison among the performance of these three channels shows that the degree of fidelity depends on type of the used channel, type of the measurement, and value of the acceleration. The result of comparison concludes that teleporting information through channel that is based on the GHZ state is more robust than teleporting information through channels that are based on the other two states. For future work, the proposed procedure can be generalized later to achieve communication through a wider quantum network. (paper)
International Nuclear Information System (INIS)
Bryant, D.A.
1989-10-01
Two theories of auroral electron acceleration are discussed. Part 1 examines the currently widely held view that the acceleration is an ordered process in a quasi-static electric field. It is suggested that, although there are many factors seeming to support this theory, the major qualifications and uncertainties that have been identified combine to cast serious doubt over its validity. Part 2 is devoted to a relatively new interpretation in terms of stochastic acceleration in turbulent electric fields. This second theory, which appears to account readily for most known features of the electron distribution function, is considered to provide a more promising approach to this central question in magnetospheric plasma physics. (author)
Accelerator-based ultrasensitive mass spectrometry
International Nuclear Information System (INIS)
Gove, H.E.
1985-01-01
This chapter describes a new mass spectrometry technique involving charged particle accelerators normally used for basic research in nuclear science. Topics considered include the limitations of conventional mass spectrometry, the limitations of the direct measurement of radioactive decay, mass spectrometry using a tandem electrostatic accelerator, mass spectrometry using a cyclotron, how accelerator mass spectrometry circumvents the limitations of conventional mass spectrometry, measurements of stable isotopes, nuclear physics and astrophysics applications, modifications to existing accelerators, descriptions of dedicated systems, and future applications
Application of local area networks to accelerator control systems at the Stanford Linear Accelerator
International Nuclear Information System (INIS)
Fox, J.D.; Linstadt, E.; Melen, R.
1983-03-01
The history and current status of SLAC's SDLC networks for distributed accelerator control systems are discussed. These local area networks have been used for instrumentation and control of the linear accelerator. Network topologies, protocols, physical links, and logical interconnections are discussed for specific applications in distributed data acquisition and control system, computer networks and accelerator operations
Superconducting linear accelerator system for NSC
Indian Academy of Sciences (India)
This paper reports the construction of a superconducting linear accelerator as a booster to the 15 UD Pelletron accelerator at Nuclear Science Centre, New Delhi. The LINAC will use superconducting niobium quarter wave resonators as the accelerating element. Construction of the linear accelerator has progressed ...
Low-velocity superconducting accelerating structures
International Nuclear Information System (INIS)
Delayen, J.R.
1990-01-01
The present paper reviews the status of RF superconductivity as applied to low-velocity accelerating properties. Heavy-ion accelerators must accelerate efficiently particles which travel at a velocity much smaller than that of light particles, whose velocity changes along accelerator, and also different particles which have different velocity profiles. Heavy-ion superconducting accelerators operate at frequencies which are lower than high-energy superconducting accelerators. The present paper first discusses the basic features of heavy-ion superconducting structures and linacs. Design choices are then addressed focusing on structure geometry, materials, frequency, phase control, and focusing. The report also gives an outline of the status of superconducting booster projects currently under way at the Argonne National Laboratory, SUNY Stony Brook, Weizmann Institute, University of Washington, Florida State, Saclay, Kansas State, Daresbury, Japanese Atomic Energy Research Institute, Legnaro, Bombay, Sao Paulo, ANU (Canberra), and Munich. Recent developments and future prospects are also described. (N.K.) 68 refs
An Adiabatic Phase-Matching Accelerator
Energy Technology Data Exchange (ETDEWEB)
Lemery, Francois [DESY; Floettmann, Klaus [DESY; Piot, Philippe [Northern Illinois U.; Kaertner, Franz X. [Hamburg U.; Assmann, Ralph [DESY
2017-12-22
We present a general concept to accelerate non-relativistic charged particles. Our concept employs an adiabatically-tapered dielectric-lined waveguide which supports accelerating phase velocities for synchronous acceleration. We propose an ansatz for the transient field equations, show it satisfies Maxwell's equations under an adiabatic approximation and find excellent agreement with a finite-difference time-domain computer simulation. The fields were implemented into the particle-tracking program {\\sc astra} and we present beam dynamics results for an accelerating field with a 1-mm-wavelength and peak electric field of 100~MV/m. The numerical simulations indicate that a $\\sim 200$-keV electron beam can be accelerated to an energy of $\\sim10$~MeV over $\\sim 10$~cm. The novel scheme is also found to form electron beams with parameters of interest to a wide range of applications including, e.g., future advanced accelerators, and ultra-fast electron diffraction.
International Nuclear Information System (INIS)
Anon.
1986-01-01
The CERN Accelerator School (CAS) offers a regular course on general accelerator physics. The first basic course was given in September 1984 at Orsay, France, and last September the advanced course was jointly organized by CAS, Oxford's Nuclear Physics Laboratory and the Rutherford Appleton Laboratory, and held at The Queen's College, Oxford
International Nuclear Information System (INIS)
Rowe, C.H.; Wilton, M.S. de.
1979-01-01
An improved recirculating electron beam linear accelerator of the racetrack type is described. The system comprises a beam path of four straight legs with four Pretzel bending magnets at the end of each leg to direct the beam into the next leg of the beam path. At least one of the beam path legs includes a linear accelerator. (UK)
Laser-driven electron accelerators
International Nuclear Information System (INIS)
Palmer, R.B.
1981-01-01
The following possibilities are discussed: inverse free electron laser (wiggler accelerator); inverse Cerenkov effect; plasma accelerator; dielectric tube; and grating linac. Of these, the grating acceleraton is considered the most attractive alternative
San Francisco Accelerator Conference
International Nuclear Information System (INIS)
Southworth, Brian
1991-01-01
'Where are today's challenges in accelerator physics?' was the theme of the open session at the San Francisco meeting, the largest ever gathering of accelerator physicists and engineers
High-energy inverse free-electron laser accelerator
International Nuclear Information System (INIS)
Courant, E.D.; Pellegrini, C.; Zakowicz, W.
1985-01-01
We study the inverse free electron laser (IFEL) accelerator and show that it can accelerate electrons to the few hundred GeV region with average acceleration rates of the order of 200 meV/m. Several possible accelerating structures are analyzed, and the effect of synchrotron radiation losses is studied. The longitudinal phase stability of accelerated particles is also analyzed. A Hamiltonian description, which takes into account the dissipative features of the IFEL accelerator, is introduced to study perturbations from the resonant acceleration. Adiabatic invariants are obtained and used to estimate the change of the electron phase space density during the acceleration process
Industrial use of electron accelerators
International Nuclear Information System (INIS)
Tabata, Y.
1980-01-01
Use of accelerators in various fields of Japan is reviewed. The total number of accelerators in Japan and its relation with others fields, the number of accelerators for use in radiation processing, comparison between the use of low and high energy machines, etc... is done. (E.G.) [pt
Health physics practices at research accelerators
International Nuclear Information System (INIS)
Thomas, R.H.
1976-02-01
A review is given of the uses of particle accelerators in health physics, the text being a short course given at the Health Physics Society Ninth Midyear Topical Symposium in February, 1976. Topics discussed include: (1) the radiation environment of high energy accelerators; (2) dosimetry at research accelerators; (3) shielding; (4) induced activity; (5) environmental impact of high energy accelerators; (6) population dose equivalent calculation; and (7) the application of the ''as low as practicable concept'' at accelerators
Compact accelerator for medical therapy
Caporaso, George J.; Chen, Yu-Jiuan; Hawkins, Steven A.; Sampayan, Stephen E.; Paul, Arthur C.
2010-05-04
A compact accelerator system having an integrated particle generator-linear accelerator with a compact, small-scale construction capable of producing an energetic (.about.70-250 MeV) proton beam or other nuclei and transporting the beam direction to a medical therapy patient without the need for bending magnets or other hardware often required for remote beam transport. The integrated particle generator-accelerator is actuable as a unitary body on a support structure to enable scanning of a particle beam by direction actuation of the particle generator-accelerator.
Mutzberg, J.
1972-01-01
Design is proposed for inexpensive accelerometer which would work by applying pressure to fluid during acceleration. Pressure is used to move shuttle, and shuttle movement is sensed and calibrated to give acceleration readings.
Energy Technology Data Exchange (ETDEWEB)
Kato, W Y; Dates, L R [Argonne National Laboratory, Argonne, IL (United States)
1962-03-15
estudiar las propiedades fisicas de los grandes reactores, altamente diluidos, de com- bustible metalico o ceramico, desprovistos de moderador o parcialmente moderados, con cuerpos de hasta 1500 l de volumen. Los autores describen detalladamente el ZPR-VI y analizan los criterios seguidos en el diseno de sus diversos componentes desde el punto de vista de la fisica de reactores. Asimismo, formulan algunas observaciones acerca de los procedimientos de explotacion y manejo del reactor, los peligros que se pueden presentar durante su funcionamiento, las tecnicas experimentales que conviene emplear y los costos de construccion. (author) [Russian] V programme razrabotki ehnergeticheskikh reaktorov na bystrykh nejtronakh kriticheskaya sborka yavlyaetsya ves'ma poleznym sredstvom dlya kontrolirovani ya vychislitel'nykh metodov, proverki sbornikov sechenij nejtronov i polucheniya vsekh parametrov reaktornoj fiziki, neobkhodimykh dlya proektirovaniya yadernoj ehnergeticheskoj sistemy. 'Poskol'ku ona yavlyaetsya prezhde vsego fizicheskoj sistemoj, proektirovanie kriticheskoj sborki stavit samo po sebe ryad trudnykh problem, ne vstrechayushchikhsya pri proektirovanii ehnergeticheskogo reaktora. Krome obychnykh voprosov, svyazannykh s mestoraspolozheniem , obolochkoj reaktora, raschetom aktivnoj zony i kontrol'no-izmeritel'nym i priborami, voznikayut takie problemy, kak dostizhenie vysokoj stepeni gibkosti, sovmestimoj s bezopasnost'yu, opredelenie razmerov i tipa ustanovki, udovletvoryayushchi kh trebovaniyam ehksperimental'noj fiziki, opredelenie chisla i razmeshcheniya reguliruyushchikh i avarijnykh sterzhnej, svodyashchikh k minimumu posledstviya vozmushchenij, i spetsifikatsiya vosproizvodimost i reguliruyushchikh sterzhnej i drugikh podvizhnykh komponentov s tem, chtoby obespechit' toch- nost', neobkhodimuyu pri izmereniyakh reaktivnosti. EHto lish' nekotorye iz problem, kotorye obsuzhdayutsya v nastoyashchem doklade, osnovannom na poslednem ehksperimente v Argonnskoj natsional
38 CFR 9.14 - Accelerated Benefits.
2010-07-01
... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Accelerated Benefits. 9...' GROUP LIFE INSURANCE AND VETERANS' GROUP LIFE INSURANCE § 9.14 Accelerated Benefits. (a) What is an Accelerated Benefit? An Accelerated Benefit is a payment of a portion of your Servicemembers' Group Life...
Heavy ion acceleration strategies in the AGS accelerator complex -- 1994 Status report
International Nuclear Information System (INIS)
Ahrens, L.A.; Benjamin, J.; Blaskiewicz, M.
1995-01-01
The strategies invoked to satisfy the injected beam specifications for the Brookhaven Relativistic Heavy Ion Collider (RHIC) continue to evolve, in the context of the yearly AGS fixed target heavy ion physics runs. The primary challenge is simply producing the required intensity. The acceleration flexibility available particularly in the Booster main magnet power supply and rf accelerating systems, together with variations in the charge state delivered from the Tandem van de Graaff, and accommodation by the AGS main magnet and rf systems allow the possibility for a wide range of options. The yearly physics run provides the opportunity for exploration of these options with the resulting significant evolution in the acceleration plan. This was particularly true in 1994 with strategies involving three different charge states and low and high acceleration rates employed in the Booster. The present status of this work will be presented
New techniques for particle accelerators
International Nuclear Information System (INIS)
Sessler, A.M.
1990-06-01
A review is presented of the new techniques which have been proposed for use in particle accelerators. Attention is focused upon those areas where significant progress has been made in the last two years--in particular, upon two-beam accelerators, wakefield accelerators, and plasma focusers. 26 refs., 5 figs., 1 tab
ACCELERATORS: Nonlinear dynamics in Sardinia
International Nuclear Information System (INIS)
Anon.
1985-01-01
In the last few years, two schools devoted to accelerator physics have been set up, one on either side of the Atlantic. The US School on High Energy Particle Accelerators has organized Summer Schools on the physics of particle accelerators, hosted by the major American Laboratories, each year since 1981
ACCELERATORS: Nonlinear dynamics in Sardinia
Energy Technology Data Exchange (ETDEWEB)
Anon.
1985-05-15
In the last few years, two schools devoted to accelerator physics have been set up, one on either side of the Atlantic. The US School on High Energy Particle Accelerators has organized Summer Schools on the physics of particle accelerators, hosted by the major American Laboratories, each year since 1981.
IAE pulsed electrostatic accelerator
International Nuclear Information System (INIS)
Afanas'ev, V.P.; Ganzhelyuk, M.L.; Kozlov, L.D.; Koltypin, E.A.; Molchanov, Yu.D.; Otroshchenko, G.A.; Yan'kov, G.B.
1976-01-01
The modernized pulse electrostatic accelerator using the klystron ion grouping and the beam interruption system prior to acceleration is described. The accelerator is modernized in order to improve parameters of a current pulse and to decrease the background in the measurement room. The ion beam of needed dimensions is obtained with the help of a high-frequency source and a beam grouping and deflection system. The general view of the beam grouping and deflection system is shown. The ion beam forming process is considered in detail. The modernized electrostatic accelerator permits to obtain a pulse current with a pulse length of 1.5 ns and an amplitude of 1.5 - 2 μA. With the repetition frequency of 2 MHz, the average target current is about 6 μA
Wake field acceleration experiments
International Nuclear Information System (INIS)
Simpson, J.D.
1988-01-01
Where and how will wake field acceleration devices find use for other than, possibly, accelerators for high energy physics? I don't know that this can be responsibly answered at this time. What I can do is describe some recent results from an ongoing experimental program at Argonne which support the idea that wake field techniques and devices are potentially important for future accelerators. Perhaps this will spawn expanded interest and even new ideas for the use of this new technology. The Argonne program, and in particular the Advanced Accelerator Test Facility (AATF), has been reported in several fairly recent papers and reports. But because this is a substantially new audience for the subject, I will include a brief review of the program and the facility before describing experiments. 10 refs., 7 figs
Laser-driven acceleration with Bessel beam
International Nuclear Information System (INIS)
Imasaki, Kazuo; Li, Dazhi
2005-01-01
A new approach of laser-driven acceleration with Bessel beam is described. Bessel beam, in contrast to the Gaussian beam, shows diffraction-free'' characteristics in its propagation, which implies potential in laser-driven acceleration. But a normal laser, even if the Bessel beam, laser can not accelerate charged particle efficiently because the difference of velocity between the particle and photon makes cyclic acceleration and deceleration phase. We proposed a Bessel beam truncated by a set of annular slits those makes several special regions in its travelling path, where the laser field becomes very weak and the accelerated particles are possible to receive no deceleration as they undergo decelerating phase. Thus, multistage acceleration is realizable with high gradient. In a numerical computation, we have shown the potential of multistage acceleration based on a three-stage model. (author)
International Nuclear Information System (INIS)
Budtov, A.A.; Klinov, A.P.; Krestianinov, A.S.
2004-01-01
A series of compact linear electron accelerators for 1.9, 2.5 and 4.0 MeV equipped with a local radiation shielding has been designed and constructed in the NPK LUTS, the D.V.Efremov Institute (NIIEFA). The accelerators are intended for mobile facilities used for customs inspection of large-scale containers. Results of optimizing calculations of irradiator parameters and electron dynamics, verified under accelerators testing, are presented in the report. The main design approaches allowing the construction of unified accelerators with interchangeable accelerating structures for energies in the range of 1.9...4.0 MeV are also given
Accelerators for research and applications
International Nuclear Information System (INIS)
Alonso, J.R.
1990-06-01
The newest particle accelerators are almost always built for extending the frontiers of research, at the cutting edge of science and technology. Once these machines are operating and these technologies mature, new applications are always found, many of which touch our lives in profound ways. The evolution of accelerator technologies will be discussed, with descriptions of accelerator types and characteristics. The wide range of applications of accelerators will be discussed, in fields such as nuclear science, medicine, astrophysics and space-sciences, power generation, airport security, materials processing and microcircuit fabrication. 13 figs
Relativistic Shock Acceleration
International Nuclear Information System (INIS)
Duffy, P.; Downes, T.P.; Gallant, Y.A.; Kirk, J.G.
1999-01-01
In this paper we briefly review the basic theory of shock waves in relativistic hydrodynamics and magneto-hydrodynamics, emphasising some astrophysically interesting cases. We then present an overview of the theory of particle acceleration at such shocks describing the methods used to calculate the spectral indices of energetic particles. Recent results on acceleration at ultra-relativistic shocks are discussed. (author)
TeV/m nano-accelerator: Investigation on feasibility of CNT-channeling acceleration at Fermilab
Energy Technology Data Exchange (ETDEWEB)
Shin, Y. M. [Northern Illinois Univ., DeKalb, IL (United States); Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Lumpkin, A. H. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Thurman-Keup, R. M. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)
2015-03-23
The development of high gradient acceleration and tight phase-space control of high power beams is a key element for future lepton and hadron colliders since the increasing demands for higher energy and luminosity significantly raise costs of modern HEP facilities. Atomic channels in crystals are known to consist of 10–100 V/Å potential barriers capable of guiding and collimating a high energy beam providing continuously focused acceleration with exceptionally high gradients (TeV/m). However, channels in natural crystals are only angstrom-size and physically vulnerable to high energy interactions, which has prevented crystals from being applied to high power accelerators. Carbon-based nano-crystals such as carbon-nanotubes (CNTs) and graphenes have a large degree of dimensional flexibility and thermo-mechanical strength, which could be suitable for channeling acceleration of MW beams. Nano-channels of the synthetic crystals can accept a few orders of magnitude larger phase-space volume of channeled particles with much higher thermal tolerance than natural crystals. This study presents the current status of CNT-channeling acceleration research at the Advanced Superconducting Test Accelerator (ASTA) in Fermilab.
Energy Technology Data Exchange (ETDEWEB)
Myers, T.J.; Favale, A.J.; Berwald, D.H.; Burger, E.C.; Paulson, C.C.; Peacock, M.A.; Piaszczyk, C.M.; Piechowiak, E.M.; Rathke, J.W. [Northrop Grumman Corp., Bethpage, NY (United States). Advanced Technology and Development Center
1997-09-01
To aid in the development and optimization of emerging Accelerator Driven Transmutation Technology (ADTT) concepts, the Northrop Grumman Corporation, working together with G.H. Gillespie Associates and Los Alamos National Laboratory has developed a computational tool which combines both accelerator physics layout/analysis capabilities with engineering analysis capabilities to create a standardized platform to compare and contrast accelerator system configurations. In this context, the accelerator system configuration includes not only the accelerating structures, but also the major support systems such as the vacuum, thermal control, RF power, and cryogenic subsystem (if superconducting accelerator operation is investigated) as well as estimates of the costs for enclosures (accelerating tunnel and RF halls). This paper presents an overview of the Accelerator System Model (ASM) code flow, as well as a discussion of the data and analysis upon which it is based. Also presented is material which addresses the development of the evaluation criteria employed by this code including a presentation of the economic analysis methods, and a discussion of the cost database employed. The paper concludes with examples depicting completed and planned trade studies for both normal and superconducting accelerator applications. 8 figs.
Directory of Open Access Journals (Sweden)
A M Poursaleh
2017-08-01
Full Text Available In this paper, the feasibility studty of a new method of RF power coupling to acceleration cavity of charged particles accelerator will be evaluated. In this method a slit is created around the accelerator cavity, and RF power amplifier modules is connected directly to the acceleration cavity. In fact, in this design, the cavity in addition to acting as an acceleration cavity, acts as a RF power combiner. The benefits of this method are avoiding the use of RF vacuum tubes, transmission lines, high power combiner and coupler. In this research, cylindrical and coaxial cavities were studied, and a small sample coaxial cavity is build by this method. The results of the resarch showed that compact, economical and safe RF accelerators can be achieved by the proposed method
Research of Virtual Accelerator Control System
Institute of Scientific and Technical Information of China (English)
DongJinmei; YuanYoujin; ZhengJianhua
2003-01-01
A Virtual Accelerator is a computer process which simulates behavior of beam in an accelerator and responds to the accelerator control program under development in a same way as an actual accelerator. To realize Virtual Accelerator, control system should provide the same program interface to top layer Application Control Program, it can make 'Real Accelerator' and 'Virtual Accelerator'use the same GUI, so control system should have a layer to hide hardware details, Application Control Program access control devices through logical name but not through coded hardware address. Without this layer, it is difficult to develop application program which can access both 'Virtual' and 'Real' Accelerators using same program interfaces. For this reason, we can create CSR Runtime Database which allows application program to access hardware devices and data on a simulation process in a unified way. A device 'is represented as a collection of records in CSR Runtime Database. A control program on host computer can access devices in the system only through names of record fields, called channel.
Development of new electron beam accelerator
International Nuclear Information System (INIS)
Tanaka, Jiro
1976-01-01
Approximately two decades have elapsed since electron accelerators were first employed in industry. It is widely used in the fields of chemical and food industries and the prevention of pollution. The accelerators for industrial use are limited to those obtainable high current or high output, low cost and easy handling. The low energy (up to 2 or 3 MeV) accelerators applicable to industry include the rectification type (Cockcroft, Dynamitron, Van de Graaff etc.), the AC transformer type (resonance transformer, cascade transformer) and the transformer type. As the accelerators of higher energy (more than 3 MeV), there exist the linear accelerator and the electromagnetic induction type. The linear accelerators are widely employed for industrial and medical uses as the large output can be obtained. Though various types of accelerators are used in industry, more increasing demands in accordance with the diversification of application are not always satisfied. As it seems that the realization of a new accelerator of improved performance and cost requires long time, it may be important to perform the standardization by dividing the energy and output ranges. (Wakatsuki, Y.)
Low-β acceleration with a MEQALAC
International Nuclear Information System (INIS)
van Amersfoort, P.W.; Siebenlist, F.; Thomae, R.W.; Woljke, R.; Schonewille, F.G.; Ivanov, S.T.; Klein, H.; Schempp, A.; Weis, T.
1986-01-01
In a Multiple Electrostatic Quadrupole Array Linear Accelerator (MEQALAC) a number of parallel beams is accelerated simultaneously. This devise is useful for exit energies up to 1 MeV per nucleon. Radial stability is provided by electrostatic quadrupole lenses placed between successive acceleration gaps. The proof-of-principle MEQALAC presently available at FOM features four He + ion beams which are accelerated to an energy of 120 keV. The resonator cavity has a modified Interdigital-H-structure and contains 20 acceleration gaps. Its resonance frequency is 40 MHz. Transmission measurements on injected beams with currents ranging from 1 to 15 mA are presented. The transverse phase advance per cell of the quadrupole channels is varied between 43 0 and 114 0 . A maximum current of 2.2 mA per channel has been accelerated. A design for a MEQALAC which will be used for acceleration of N + ions to 1 MeV is presented. This accelerator will be operated at various frequencies to allow for a variation of the exit energy
Accelerator Toolbox for MATLAB
International Nuclear Information System (INIS)
Terebilo, Andrei
2001-01-01
This paper introduces Accelerator Toolbox (AT)--a collection of tools to model particle accelerators and beam transport lines in the MATLAB environment. At SSRL, it has become the modeling code of choice for the ongoing design and future operation of the SPEAR 3 synchrotron light source. AT was designed to take advantage of power and simplicity of MATLAB--commercially developed environment for technical computing and visualization. Many examples in this paper illustrate the advantages of the AT approach and contrast it with existing accelerator code frameworks
Electron cyclotron harmonic wave acceleration
Karimabadi, H.; Menyuk, C. R.; Sprangle, P.; Vlahos, L.
1987-01-01
A nonlinear analysis of particle acceleration in a finite bandwidth, obliquely propagating electromagnetic cyclotron wave is presented. It has been suggested by Sprangle and Vlahos in 1983 that the narrow bandwidth cyclotron radiation emitted by the unstable electron distribution inside a flaring solar loop can accelerate electrons outside the loop by the interaction of a monochromatic wave propagating along the ambient magnetic field with the ambient electrons. It is shown here that electrons gyrating and streaming along a uniform, static magnetic field can be accelerated by interacting with the fundamental or second harmonic of a monochromatic, obliquely propagating cyclotron wave. It is also shown that the acceleration is virtually unchanged when a wave with finite bandwidth is considered. This acceleration mechanism can explain the observed high-energy electrons in type III bursts.
Electron cyclotron harmonic wave acceleration
International Nuclear Information System (INIS)
Karimabadi, H.; Menyuk, C.R.; Sprangle, P.; Vlahos, L.; Salonika Univ., Greece)
1987-01-01
A nonlinear analysis of particle acceleration in a finite bandwidth, obliquely propagating electromagnetic cyclotron wave is presented. It has been suggested by Sprangle and Vlahos in 1983 that the narrow bandwidth cyclotron radiation emitted by the unstable electron distribution inside a flaring solar loop can accelerate electrons outside the loop by the interaction of a monochromatic wave propagating along the ambient magnetic field with the ambient electrons. It is shown here that electrons gyrating and streaming along a uniform, static magnetic field can be accelerated by interacting with the fundamental or second harmonic of a monochromatic, obliquely propagating cyclotron wave. It is also shown that the acceleration is virtually unchanged when a wave with finite bandwidth is considered. This acceleration mechanism can explain the observed high-energy electrons in type III bursts. 31 references
Linear accelerator accelerating module to suppress back-acceleration of field-emitted particles
Benson, Stephen V.; Marhauser, Frank; Douglas, David R.; Ament, Lucas J. P.
2017-12-05
A method for the suppression of upstream-directed field emission in RF accelerators. The method is not restricted to a certain number of cavity cells, but requires similar operating field levels in all cavities to efficiently annihilate the once accumulated energy. Such a field balance is desirable to minimize dynamic RF losses, but not necessarily achievable in reality depending on individual cavity performance, such as early Q.sub.0-drop or quench field. The method enables a significant energy reduction for upstream-directed electrons within a relatively short distance. As a result of the suppression of upstream-directed field emission, electrons will impact surfaces at rather low energies leading to reduction of dark current and less issues with heating and damage of accelerator components as well as radiation levels including neutron generation and thus radio-activation.
Future HEP Accelerators: The US Perspective
Energy Technology Data Exchange (ETDEWEB)
Bhat, Pushpalatha [Fermilab; Shiltsev, Vladimir [Fermilab
2015-11-02
Accelerator technology has advanced tremendously since the introduction of accelerators in the 1930s, and particle accelerators have become indispensable instruments in high energy physics (HEP) research to probe Nature at smaller and smaller distances. At present, accelerator facilities can be classified into Energy Frontier colliders that enable direct discoveries and studies of high mass scale particles and Intensity Frontier accelerators for exploration of extremely rare processes, usually at relatively low energies. The near term strategies of the global energy frontier particle physics community are centered on fully exploiting the physics potential of the Large Hadron Collider (LHC) at CERN through its high-luminosity upgrade (HL-LHC), while the intensity frontier HEP research is focused on studies of neutrinos at the MW-scale beam power accelerator facilities, such as Fermilab Main Injector with the planned PIP-II SRF linac project. A number of next generation accelerator facilities have been proposed and are currently under consideration for the medium- and long-term future programs of accelerator-based HEP research. In this paper, we briefly review the post-LHC energy frontier options, both for lepton and hadron colliders in various regions of the world, as well as possible future intensity frontier accelerator facilities.
Photon acceleration in laser wakefield accelerators
International Nuclear Information System (INIS)
Trines, R. M. G. M.
2007-01-01
If the index of a refraction of a dispersive medium, such as a plasma, changes in time, it can be used to change the frequency of light propagating through the medium. This effect is called photon acceleration. It has been predicted in both theory and simulations, and also been demonstrated experimentally for the case of moving ionization fronts in gases (the so-called ionization blueshift) as well as for laser-driven wakefields.Here, we present studies of photon acceleration in laser-driven plasma wakefields. The unique spectral characteristics of this process will be discussed, to distinguish it from e.g. photon acceleration by ionization fronts, frequency domain interferometry or self-phase modulation. The dynamics of the photons in laser-wakefield interaction are studied through both regular particle-in-cell and wave-kinetic simulations. The latter approach provides a powerful, versatile, and easy-to-use method to track the propagation of individual spectral components, providing new insight into the physics of laser-plasma interaction. Theory, simulations and experimental results will be brought together to provide a full understanding of the dynamics of a laser pulse in its own wakefield.Even though the wave-kinetic approach mentioned above has mainly been developed for the description of laser-plasma interaction, it can be applied to a much wider range of fast wave-slow wave interaction processes: Langmuir waves-ion acoustic waves, drift waves-zonal flow, Rossby waves-zonal flow, or even photons-gravitational waves. Several recent results in these areas will be shown, often with surprising results
High-current proton accelerators-meson factories
International Nuclear Information System (INIS)
Dmitrievskij, V.P.
1979-01-01
A possibility of usage of accelerators of neutron as well as meson factories is considered. Parameters of linear and cyclic accelerators are given, which are employed as meson factories and as base for developing intense neutron generators. It is emphasized that the principal aim of developing neutron generators on the base of high current proton accelerators is production of intense neutron fluxes with a present energy spectrum. Production of tens-and-hundreds milliampere currents at the energy of 800-1000 MeV is considered at present for two types of accelerating facilities viz. linear accelerators under continuous operating conditions and cyclotrons with strong focusing. Quantitative evaluations of developing high-efficiency linear and cyclic accelerators are considered. The basic parameters of an ccelerating complex are given, viz. linear accelerator-injector and 800 MeV isochronous cyclotron. The main problems associated with their realization are listed [ru
Safety and regulatory aspects of accelerators
International Nuclear Information System (INIS)
Singh, Pitamber
2017-01-01
Particle accelerators are devices that produce beams of energetic ions and electrons which have applications in various fields. Historically, particle accelerators were developed for nuclear physics research. Although the particle physics community is still the main user group, joined by others. There is also an increasing interest in radiation therapy in the medical world and industry has been a long-time user of ion implantation an many other applications. Accelerators are also being used for nuclear energy generation using Thorium and waste management through incineration of minor actinides using accelerator driven sub-critical reactor system (ADS). This is of great interest to India as it has large resources of good quality thorium. The ADS are considered to be an inherently safe system as the reactor is sub-critical. However, ADS require high energy and high current proton beams which involve complex technologies. Accelerators deliver energy to the charged particles by means of electromagnetic fields. Depending on how the electric and magnetic fields are used, the accelerators can be grouped in three categories namely electrostatic or DC accelerators, RF accelerators and colliding rings. In DC accelerators, particles pass through a high voltage and gain energy given by E= qV where q is the charge of ion and V is the voltage tough which ion pass. In order to sustain high voltage accelerator column section is housed inside a pressure vessel which is filled with gas, normally SF_6, at high pressure (100 -150 psig)
Energy Technology Data Exchange (ETDEWEB)
Toyama, Shin`ichi [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center
1998-07-01
It is important for high current accelerators to estimate the contribution of the space charge effect to keep the beam off its beak up (BBU). The CW electron linac is designed in order to study BBU experimentally. The design is primary on the consideration which type of accelerator structure is suitable to reduce the BBU threshold, and how to observe and control BBU when it appears. The contribution of beam charge for the acceleration characteristics is surveyed by means of the comparison between traveling wave and standing wave structures in this report. At first, the characteristics of both traveling wave and standing wave structures are calculated analytically and the conversion efficiency and accelerator gain are presented. The merits and drawbacks are also mentioned concerning with unit accelerator length. Next, the choice of RF frequency on energy conversion is mentioned as independent matter of the types of accelerator structure. After that, the characteristics of TWRR are described as the advanced accelerator structure compared with above structures. The effect of longitudinal induced field is estimated by means of the loss parameter. The result from the analysis shows that the unit accelerator length is 1 m to get high conversion ratio from RF to beam power and that the BBU for transverse component is small. Therefore, total BBU is expected small in the accelerator, for transverse BBU is already expected small in previous reports. (author)
High energy plasma accelerators
International Nuclear Information System (INIS)
Tajima, T.
1985-05-01
Colinear intense laser beams ω 0 , kappa 0 and ω 1 , kappa 1 shone on a plasma with frequency separation equal to the electron plasma frequency ω/sub pe/ are capable of creating a coherent large longitudinal electric field E/sub L/ = mc ω/sub pe//e of the order of 1GeV/cm for a plasma density of 10 18 cm -3 through the laser beat excitation of plasma oscillations. Accompanying favorable and deleterious physical effects using this process for a high energy beat-wave accelerator are discussed: the longitudinal dephasing, pump depletion, the transverse laser diffraction, plasma turbulence effects, self-steepening, self-focusing, etc. The basic equation, the driven nonlinear Schroedinger equation, is derived to describe this system. Advanced accelerator concepts to overcome some of these problems are proposed, including the plasma fiber accelerator of various variations. An advanced laser architecture suitable for the beat-wave accelerator is suggested. Accelerator physics issues such as the luminosity are discussed. Applications of the present process to the current drive in a plasma and to the excitation of collective oscillations within nuclei are also discussed
Creer, Brent Y.; Smedal, Harald A.; Wingrove, Rodney C.
1960-01-01
A research program the general objective of which was to measure the effects of various sustained accelerations on the control performance of pilots, was carried out on the Aviation Medical Acceleration Laboratory centrifuge, U.S. Naval Air Development Center, Johnsville, PA. The experimental setup consisted of a flight simulator with the centrifuge in the control loop. The pilot performed his control tasks while being subjected to acceleration fields such as might be encountered by a forward-facing pilot flying an atmosphere entry vehicle. The study was divided into three phases. In one phase of the program, the pilots were subjected to a variety of sustained linear acceleration forces while controlling vehicles with several different sets of longitudinal dynamics. Here, a randomly moving target was displayed to the pilot on a cathode-ray tube. For each combination of acceleration field and vehicle dynamics, pilot tracking accuracy was measured and pilot opinion of the stability and control characteristics was recorded. Thus, information was obtained on the combined effects of complexity of control task and magnitude and direction of acceleration forces on pilot performance. These tests showed that the pilot's tracking performance deteriorated markedly at accelerations greater than about 4g when controlling a lightly damped vehicle. The tentative conclusion was also reached that regardless of the airframe dynamics involved, the pilot feels that in order to have the same level of control over the vehicle, an increase in the vehicle dynamic stability was required with increases in the magnitudes of the acceleration impressed upon the pilot. In another phase, boundaries of human tolerance of acceleration were established for acceleration fields such as might be encountered by a pilot flying an orbital vehicle. A special pilot restraint system was developed to increase human tolerance to longitudinal decelerations. The results of the tests showed that human tolerance
Damage limits of accelerator equipment
Rosell, Gemma
2014-01-01
Beam losses occur in particle accelerators for various reasons. The effect of lost particles on accelerator equipment becomes more severe with the increasing energies and intensities. The present study is focused on the damage potential of the proton beam as a function of particle energy and beam size. Injection and extraction energies of different accelerators at CERN were considered.
Stochastic acceleration by hydromagnetic turbulence
International Nuclear Information System (INIS)
Kulsrud, R.M.
1979-03-01
A general theory for particle acceleration by weak hydromagnetic turbulence with a given spectrum of waves is described. Various limiting cases, corresponding to Fermi acceleration and magnetic pumping, are discussed and two numerical examples illustrating them are given. An attempt is made to show that the expression for the rate of Fermi acceleration is valid for finite amplitudes
The auroral electron accelerator
International Nuclear Information System (INIS)
Bryant, D.A.; Hall, D.S.
1989-01-01
A model of the auroral electron acceleration process is presented in which the electrons are accelerated resonantly by lower-hybrid waves. The essentially stochastic acceleration process is approximated for the purposes of computation by a deterministic model involving an empirically derived energy transfer function. The empirical function, which is consistent with all that is known of electron energization by lower-hybrid waves, allows many, possibly all, observed features of the electron distribution to be reproduced. It is suggested that the process occurs widely in both space and laboratory plasmas. (author)
Hadron accelerators in medicine
International Nuclear Information System (INIS)
Amaldi, U.
1996-01-01
The application of hadron accelerators (protons and light ions) in cancer therapy is discussed. After a brief introduction on the rationale for the use of heavy charged particles in radiation therapy, a discussion is given on accelerator technology and beam delivery systems. Next, existing and planned facilities are briefly reviewed. The Italian Hadron-therapy Project is then described in some detail, with reference ro both the National Centre for Oncological Hadron-therapy and the design of different types of compact proton accelerators aimed at introducing proton therapy in a large umber of hospitals. (author)
PIGMI linear-accelerator technology
International Nuclear Information System (INIS)
Boyd, T.J.; Crandall, K.R.; Hamm, R.W.
1981-01-01
A new linear-accelerator technology has been developed that makes pi-meson (pion) generation possible for cancer therapy in the setting of a major hospital center. This technology uses several new major inventions in particle accelerator science-such as a new accelerator system called the radio-frequency quadrupole (RFQ), and permanent-magnet drift-tube focusing-to substantially reduce the size, cost, and complexity of a meson factory for this use. This paper describes this technology, discusses other possible uses for these new developments, and finally discusses possible costs for such installations
International Nuclear Information System (INIS)
Mosnier, A.; Ratzinger, U.
2008-01-01
The IFMIF requirement for 250 mA current of deuteron beams at a nominal energy of 40 MeV is met by means of two identical continuous wave (CW) 175 MHz linear accelerators running in parallel, each delivering a 125 mA, 40 MeV deuteron beam to the common target. This approach allows to stay within the current capability of present RF linac technology while providing operational redundancy in case of failure of one of the linacs. Each linac comprises a sequence of acceleration and beam transport/matching stages. The ion source generates a 140 mA deuteron beam at 100 keV. A low energy beam transport (LEBT) transfers the deuteron beam from the source to a radio frequency quadrupole (RFQ) cavity. The RFQ bunches and accelerates the 125 mA beam to 5 MeV. The RFQ output beam is injected through a matching section into a drift-tube-linac (DTL) where it is accelerated to the final energy of 40 MeV. In the reference design, the final acceleration stage is a conventional Alvarez-type DTL with post-couplers operating at room temperature. Operation of both the RFQ and the DTL at the same relatively low frequency is essential for accelerating the high current deuteron beam with low beam loss. The primary concern of the IFMIF linacs is the minimization of beam losses, which could limit their availability and maintainability due to excessive activation of the linac and irradiation of the environment. A careful beam dynamics design is therefore needed from the source to the target to avoid the formation of particle halo that could finally be lost in the linac or transfer lines. A superconducting solution for the high energy portion of the linac using, for example, CH-structure or coaxial-type resonators, could offer some advantages, in particular the reduction of operational costs. Careful beam dynamics simulations and comparison tests with beam during the EVEDA phase are however necessary in order to fully assess the technical feasibility of such alternative solutions
International Nuclear Information System (INIS)
Anon.
1993-01-01
Full text: Jyvaskyla, a university town in central Finland, was the setting for last year's General Accelerator School organized by the CERN Accelerator School. Well over a hundred students - more than for some time - followed two weeks of lectures on a broad spectrum of accelerator topics, the first step en route to becoming the designers, builders and operators of the surprisingly large number of, accelerators of all kinds either built or planned throughout Europe and further afield. This was the fifth such school organized by CAS in a biennial cycle which alternates this introductory level with more advanced tuition. The next, advanced, school will be from 20 October - 1 November, hosted by Athens University on the Greek Island of Rhodes. (Application details will become available in Spring but would-be participants should already reserve the dates.) After Finland, the CAS caravan moved to Benalmadena near Malaga in Spain where, together with Seville University, they organized one of the joint US-CERN schools held every two years and focusing on frontier accelerator topics. This time the subject was electron-positron factories - machines for high luminosity experiments in phi, tau-charm, beauty and Z physics. Experts from both sides of the Atlantic and from Japan shared their knowledge with an equally representative audience and probed the many intensity related phenomena which must be mastered to reach design performance. A number of these topics will receive extended coverage in the next specialist CAS School which is a repeat - by public demand - of the highly successful radiofrequency course held in Oxford in 1991. This school will be in Capri, Italy, with the support of the University of Naples from 29 April to 5 May. Details and application forms are now available by e-mail (CASRF@CERNVM.CERN.CH), by fax (+41 22 7824836) or from Suzanne von Wartburg, CERN Accelerator School, 1211 Geneva 23, Switzerland
Overview of SSC accelerator requirements
International Nuclear Information System (INIS)
Dugan, G.
1992-03-01
This paper will present a general overview of the requirements of the Superconducting Super Collider (SSC) accelerators. Each accelerator in the injector chain will be discussed separately, followed by a discussion of the collider itself. In conclusion, the top level requirements of the overall accelerator system will be presented. For each accelerator, the primary operating parameters will be presented in tabular form. A brief narrative discussion of the principal technical features of each machine will be given. Finally, the principal technical design challenges for the machine will be noted, together with the currently planned solution to these challenges
Inverse free-electron laser accelerator development
International Nuclear Information System (INIS)
Fisher, A.; Gallardo, J.; Steenbergen, A. van; Sandweiss, J.; Fang, J.M.
1994-06-01
The study of the Inverse Free-Electron Laser, as a potential mode of electron acceleration, has been pursued at Brookhaven National Laboratory for a number of years. More recent studies focused on the development of a low energy (few GeV), high gradient, multistage linear accelerator. The authors are presently designing a short accelerator module which will make use of the 50 MeV linac beam and high power (2 x 10 11 W) CO 2 laser beam of the Accelerator Test Facility (ATF) at the Center for Accelerator Physics (CAP), Brookhaven National Laboratory. These elements will be used in conjunction with a fast excitation (300 μsec pulse duration) variable period wiggler, to carry out an accelerator demonstration stage experiment
International Nuclear Information System (INIS)
Harris, F.A.
1998-01-01
The international accelerator school on Frontiers of Accelerator Technology was organized jointly by the US Particle Accelerator School (Dr. Mel Month and Ms. Marilyn Paul), the CERN Accelerator School, and the KEK Accelerator School, and was hosted by the University of Hawaii. The course was held on Maui, Hawaii, November 3-9, 1994 and was made possible in part by a grant from the Department of Energy under award number DE-FG03-94ER40875, AMDT M006. The 1994 program was preceded by similar joint efforts held at Santa Margherita di Pula, Sardinia in February 1985, South Padre Island, Texas in October 1986, Anacapri, Italy in October 1988, Hilton Head Island, South Carolina in October 1990, and Benalmedena, Spain in October/November 1992. The most recent program was held in Montreux, Switzerland in May 1998. The purpose of the program is to disseminate knowledge on the latest ideas and developments in the technology of particle accelerators by bringing together known world experts and younger scientists in the field. It is intended for individuals with professional interest in accelerator physics and technology, for graduate students, for post-docs, for those interested in accelerator based sciences, and for scientific and engineering staff at industrial firms, especially those companies specializing in accelerator components
Spacetime transformations from a uniformly accelerated frame
International Nuclear Information System (INIS)
Friedman, Yaakov; Scarr, Tzvi
2013-01-01
We use the generalized Fermi–Walker transport to construct a one-parameter family of inertial frames which are instantaneously comoving to a uniformly accelerated observer. We explain the connection between our approach and that of Mashhoon. We show that our solutions of uniformly accelerated motion have constant acceleration in the comoving frame. Assuming the weak hypothesis of locality, we obtain local spacetime transformations from a uniformly accelerated frame K′ to an inertial frame K. The spacetime transformations between two uniformly accelerated frames with the same acceleration are Lorentz. We compute the metric at an arbitrary point of a uniformly accelerated frame. (paper)
Particle acceleration in near critical density plasma
International Nuclear Information System (INIS)
Gu, Y.J.; Kong, Q.; Kawata, S.; Izumiyama, T.; Nagashima, T.
2013-01-01
Charged particle acceleration schemes driven by ultra intense laser and near critical density plasma interactions are presented. They include electron acceleration in a plasma channel, ion acceleration by the Coulomb explosion and high energy electron beam driven ion acceleration. It is found that under the near critical density plasma both ions and electrons are accelerated with a high acceleration gradient. The electron beam containing a large charge quantity is accelerated well with 23 GeV/cm. The collimated ion bunch reaches 1 GeV. The investigations and discussions are based on 2.5D PIC (particle-in-cell) simulations. (author)
International Nuclear Information System (INIS)
Larson, J.D.
1978-01-01
A brief, subjective review is given of mechanisms that may be limiting electrostatic accelerator tubes to present levels of performance. Suggestions are made for attacking these limitations with the purpose of stimulating the thinking of designers and users of electrostatic accelerators
International Nuclear Information System (INIS)
Larson, J.D.
1977-01-01
A brief, subjective review is given of mechanisms that may be limiting electrostatic accelerator tubes to present levels of performance. Suggestions are made for attacking these limitations with the purpose of stimulating the thinking of designers and users of electrostatic accelerators
Cary, J. R.; Shasharina, S.; Bruhwiler, D. L.
1998-04-01
The MAPA code is a fully interactive accelerator modeling and design tool consisting of a GUI and two object-oriented C++ libraries: a general library suitable for treatment of any dynamical system, and an accelerator library including many element types plus an accelerator class. The accelerator library inherits directly from the system library, which uses hash tables to store any relevant parameters or strings. The GUI can access these hash tables in a general way, allowing the user to invoke a window displaying all relevant parameters for a particular element type or for the accelerator class, with the option to change those parameters. The system library can advance an arbitrary number of dynamical variables through an arbitrary mapping. The accelerator class inherits this capability and overloads the relevant functions to advance the phase space variables of a charged particle through a string of elements. Among other things, the GUI makes phase space plots and finds fixed points of the map. We discuss the object hierarchy of the two libraries and use of the code.
A new awakening for accelerator cavities
Katarina Anthony
2013-01-01
Imagine: an accelerator unbound by length; one that can bring a beam up to the TeV level in just a few hundred metres. Sounds like a dream? Perhaps not for long. At CERN’s Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE), physicists may soon be working to bring this contemporary fairy-tale to life. The AWAKE experiment in the CNGS facility. Wherever you find a modern linear particle accelerator, you’ll find with it a lengthy series of RF accelerating cavities. Although based on technology first developed over half a century ago, RF cavities have dominated the accelerating world since their inception. However, new developments in plasma accelerator systems may soon be bringing a new player into the game. By harnessing the power of wakefields generated by beams in plasma cells, physicists may be able to produce accelerator gradients of many GV/m – hundreds of times higher than those achieved in current RF cavities. “Plasma wakef...
ACFA and IPAC announce accelerator prizes
CERN Bulletin
2010-01-01
Steve Myers, CERN's Director for Accelerators and Technology. The Asian Committee for Future Accelerators (ACFA) has joined forces with the first International Particle Accelerator Conference, IPAC’10, to award prizes for outstanding work in the field of accelerators. The conference replaces the regional conferences of the Americas, Europe and Asia and will be hosted by the three regions on a rotational basis (see CERN Courier). The ACFA/IPAC’10 Prizes Selection Committee, chaired by Won Namkung of Pohang Accelerator Laboratory, decided on the prizes and the names of the winners at a meeting on 20 January. The awards will be made during IPAC’10, which will be held in Kyoto on 23-28 May. Jie Wei. (Courtesy Tsinghua University.) Steve Myers, Director for Accelerators and Technology at CERN, receives an Achievement Prize for Outstanding Work in the Accelerator Field with no Age Limit “for his numerous outstanding contributions to the design, construction, commissio...
Applications of proton and deuteron accelerators
Energy Technology Data Exchange (ETDEWEB)
Todd, A.M.M. (Grumman Corporate Research Center, Princeton, NJ (United States))
1993-06-01
Applications of positive and negative hydrogen and deuterium ion accelerators beyond basic research are increasing. Large scale proposed national laboratory/industrial projects include the Accelerator Production of Tritium (APT) which will utilize protons, and the International Fusion Material Irradiation Facility (IFMIF) which will accelerate a deuteron beam into a lithium target. At the small scale end, radio-frequency quadrupole (RFQ) accelerator based systems have been built for neutron activation analysis and for applications such as explosive detection. At an intermediate scale, the Loma Linda proton therapy accelerator is now successfully treating a full schedule of patients, and more than half a dozen such hospital based units are under active study world-wide. At this same scale, there are also several ongoing negative ion, military accelerator projects which include the Continuous Wave Deuterium Demonstrator (CWDD) and the Neutral Particle Beam Space Experiment (NPBSE). These respective deuterium and hydrogen accelerators, which have not been previously described, are the focus of this paper. (orig.)
Artificial seismic acceleration
Felzer, Karen R.; Page, Morgan T.; Michael, Andrew J.
2015-01-01
In their 2013 paper, Bouchon, Durand, Marsan, Karabulut, 3 and Schmittbuhl (BDMKS) claim to see significant accelerating seismicity before M 6.5 interplate mainshocks, but not before intraplate mainshocks, reflecting a preparatory process before large events. We concur with the finding of BDMKS that their interplate dataset has significantly more fore- shocks than their intraplate dataset; however, we disagree that the foreshocks are predictive of large events in particular. Acceleration in stacked foreshock sequences has been seen before and has been explained by the cascade model, in which earthquakes occasionally trigger aftershocks larger than themselves4. In this model, the time lags between the smaller mainshocks and larger aftershocks follow the inverse power law common to all aftershock sequences, creating an apparent acceleration when stacked (see Supplementary Information).
Application of electron accelerator worldwide
International Nuclear Information System (INIS)
Machi, Sueo
2003-01-01
Electron accelerator is an important radiation source for radiation technology, which covers broad fields such as industry, health care, food and environmental protection. There are about 1,000 electron accelerators for radiation processing worldwide. Electron accelerator has advantage over Co-60 irradiator in term of high dose rate and power, assurance of safety, and higher economic performance at larger volume of irradiation. Accelerator generating higher energy in the range of 10 MeV and high power electron beam is now commercially available. There is a trend to use high-energy electron accelerator replacing Co-60 in case of large through-put of medical products. Irradiated foods, in particular species, are on the commercial market in 35 countries. Electron accelerator is used efficiently and economically for production of new or modified polymeric materials through radiation-induced cross-linking, grafting and polymerization reaction. Another important application of electron beam is the curing of surface coatings in the manufacture of products. Electron accelerators of large capacity are used for cleaning exhaust gases in industrial scale. Economic feasibility studies of this electron beam process have shown that this technology is more cost effective than the conventional process. It should be noted that the conventional limestone process produce gypsum as a by-product, which cannot be used in some countries. By contrast, the by-product of the electron beam process is a valuable fertilizer. (Y. Tanaka)
Application of electron accelerator worldwide
Energy Technology Data Exchange (ETDEWEB)
Machi, Sueo [Japan Atomic Industrial Forum, Inc., Tokyo (Japan)
2003-02-01
Electron accelerator is an important radiation source for radiation technology, which covers broad fields such as industry, health care, food and environmental protection. There are about 1,000 electron accelerators for radiation processing worldwide. Electron accelerator has advantage over Co-60 irradiator in term of high dose rate and power, assurance of safety, and higher economic performance at larger volume of irradiation. Accelerator generating higher energy in the range of 10 MeV and high power electron beam is now commercially available. There is a trend to use high-energy electron accelerator replacing Co-60 in case of large through-put of medical products. Irradiated foods, in particular species, are on the commercial market in 35 countries. Electron accelerator is used efficiently and economically for production of new or modified polymeric materials through radiation-induced cross-linking, grafting and polymerization reaction. Another important application of electron beam is the curing of surface coatings in the manufacture of products. Electron accelerators of large capacity are used for cleaning exhaust gases in industrial scale. Economic feasibility studies of this electron beam process have shown that this technology is more cost effective than the conventional process. It should be noted that the conventional limestone process produce gypsum as a by-product, which cannot be used in some countries. By contrast, the by-product of the electron beam process is a valuable fertilizer. (Y. Tanaka)
CAS CERN Accelerator School: Superconductivity in particle accelerators. Proceedings
Energy Technology Data Exchange (ETDEWEB)
Turner, S [ed.
1996-05-01
These proceedings present the lectures given at the ninth specialized course organized by the CERN Accelerator School (CAS), the topic this time being ``Superconductivity in Particle Accelerators``. This course is basically a repeat of that given at the same location in 1988 whose proceedings were published as CERN 89-04. However, the opportunity was taken to improve the presentation of the various topics and to introduce the latest developments in this rapidly expanding field. First the basic theory of superconductivity is introduced. A review of the materials used for sc magnetics is followed by magnet design requirements, the influence of eddy and persistent currents, and the methods used to provide quench protection. Next follows the basic theory of sc cavities, their materials, high-gradient limitations, the problem of field emission and then their power couplers. After an introduction to cryogenics and cryoplants, the theory of superfluidity is presented followed by a review of the use of superfluid helium. Finally, two seminars detail the impact of superconductors in the design of the LHC and LEP2 accelerators. (orig.).
CAS CERN Accelerator School: Superconductivity in particle accelerators. Proceedings
International Nuclear Information System (INIS)
Turner, S.
1996-05-01
These proceedings present the lectures given at the ninth specialized course organized by the CERN Accelerator School (CAS), the topic this time being ''Superconductivity in Particle Accelerators''. This course is basically a repeat of that given at the same location in 1988 whose proceedings were published as CERN 89-04. However, the opportunity was taken to improve the presentation of the various topics and to introduce the latest developments in this rapidly expanding field. First the basic theory of superconductivity is introduced. A review of the materials used for sc magnetics is followed by magnet design requirements, the influence of eddy and persistent currents, and the methods used to provide quench protection. Next follows the basic theory of sc cavities, their materials, high-gradient limitations, the problem of field emission and then their power couplers. After an introduction to cryogenics and cryoplants, the theory of superfluidity is presented followed by a review of the use of superfluid helium. Finally, two seminars detail the impact of superconductors in the design of the LHC and LEP2 accelerators. (orig.)
Pressure fluctuation caused by moderate acceleration
Tagawa, Yoshiyuki; Kurihara, Chihiro; Kiyama, Akihito
2017-11-01
Pressure fluctuation caused by acceleration of a liquid column is observed in various important technologies, e.g. water-hammer in a pipeline. The magnitude of fluctuation can be estimated by two different approaches: When the duration time of acceleration is much shorter than the propagation time for a pressure wave to travel the length of the liquid column, e.g. sudden valve closure for a long pipe, Joukowsky equation is applied. In contrast, if the acceleration duration is much longer, the liquid is modeled as a rigid column, ignoring compressibility of the fluid. However, many of practical cases exist between these two extremes. In this study we propose a model describing pressure fluctuation when the duration of acceleration is in the same order of the propagation time for a pressure wave, i.e. under moderate acceleration. The novel model considers both temporal and spatial evolutions of pressure propagation as well as gradual pressure rise during the acceleration. We conduct experiments in which we impose acceleration to a liquid with varying the length of the liquid column, acceleration duration, and properties of liquids. The ratio between the acceleration duration and the propagation time is in the range of 0.02 - 2. The model agrees well with measurement results. JSPS KAKENHI Grant Numbers 26709007 and 17H01246.
JAERI tandem-accelerator and tandem-booster
Energy Technology Data Exchange (ETDEWEB)
Yoshida, Tadashi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment
1998-03-01
In 1982, aiming at the new development of atomic energy research, the tandem accelerator of Japan Atomic Energy Research Institute (JAERI) was installed. In fiscal year 1993, the superconducting boosters which can increase the ion energy by up to 4 times were added, and the research in the region below 1000 MeV became possible. Those are electrostatic type accelerators which are easy to be used especially in basic research field, and are useful for future research. The tandem accelerator has been operated while maintaining the first class performance as the accelerator for various kinds of heavy ion beam. It has the special shape among electrostatic type accelerators, and is excellent in the easiness of control and stability. The main particulars of the tandem accelerator are shown. As for the ion sources of the tandem accelerator, three cesium sputter type ion sources are installed on two high voltage stands. The kinds of the ions which can be accelerated are mainly negative ions. As the improvement, electron cyclotron resonance (ECR) ion sources are expected to be adopted. As for the tandem boosters, the 1/4 wavelength type resonance hollow cylinder was adopted. The constitution of the tandem boosters is explained. The way of utilizing the tandem accelerator system and the aim for hereafter are reported. (K.I.)
Modern accelerators in ancient Rome
International Nuclear Information System (INIS)
Anon.
1988-01-01
For the first time, the achievements and hopes of the broad European accelerator community were brought together in a European Particle Accelerator Conference, held in Rome in June. Ranging from the vast machines at CERN to the small medical accelerators operating in thousands of hospitals, the programme underlined how modern civilization has benefited from the ability to handle charged particle beams
High intensity circular proton accelerators
International Nuclear Information System (INIS)
Craddock, M.K.
1987-12-01
Circular machines suitable for the acceleration of high intensity proton beams include cyclotrons, FFAG accelerators, and strong-focusing synchrotrons. This paper discusses considerations affecting the design of such machines for high intensity, especially space charge effects and the role of beam brightness in multistage accelerators. Current plans for building a new generation of high intensity 'kaon factories' are reviewed. 47 refs
Modern accelerators in ancient Rome
Energy Technology Data Exchange (ETDEWEB)
Anon.
1988-09-15
For the first time, the achievements and hopes of the broad European accelerator community were brought together in a European Particle Accelerator Conference, held in Rome in June. Ranging from the vast machines at CERN to the small medical accelerators operating in thousands of hospitals, the programme underlined how modern civilization has benefited from the ability to handle charged particle beams.
International Nuclear Information System (INIS)
Fujisawa, Takashi; Hattori, Toshiyuki
2006-01-01
One of the present inventions provides a spiral orbit charged particle accelerator in which the magnetic field increases as the radius increases more rapidly than an isochronous magnetic field distribution, and the distribution of fixed-frequency accelerating RF voltage is formed so that a harmonic number changes in integer for every particle revolution. The other invention realizes to make the closed orbit charged particle accelerator having a fixed frequency amplitude modulator that is able to modulate amplitude of the RF voltage so that a harmonic number decreases in integer in an every particle revolution. (author)
Energy Technology Data Exchange (ETDEWEB)
Lizama-Camara, Y.A. [Universidad Veracruzana, Veracruz (Mexico)]. E-mail: yahir_lizama@ieee.org; Mendieta-Antunez, J.A.; Blanco-Brisset, E. [Industrias IEM, Tlalnepantla, Estado de Mexico (Mexico)]. E-mail: unamanu@hotmail.com; Olivares Galvan, J.C.; Escarela-Perez, R. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D.F. (Mexico)]. E-mails: jolivare_1999@yahoo.com; r.escarela@ieee.org
2012-04-15
Through the electrical industry history there have been developments of different cleaning methods to avoid the insulators flashover s due to pollution. This paper describes the principal cleaning methods applicable to transformers insulators, emphasizing the high pressure fixed-type live insulator washing method, which was applied for cleaning the insulators of 900 MVA transformer bank of the Laguna Verde power plant localized at the state of Veracruz in Mexico. We propose a transformer insulator cleaning methodology, which identifies the main variables to take into account (the voltage level of the transformers, the pollution level of the insulators, determination of the optimal wash time, the amount of water, the optimal pressure of water jet, the maximum conductivity of the water and the wind velocity), reference values are given for these variables. In addition, we present an economic cost analysis when applying a method of this kind in an electric substation. [Spanish] A lo largo de la historia de la industria electrica se han desarrollado diferentes metodos de limpieza para evitar las fallas de los aisladores de los transformadores debido a la contaminacion. Este articulo describe los principales metodos de limpieza aplicables a los aisladores de transformadores, enfatizando el sistema de lavado en vivo tipo fijo con agua a alta presion, metodo que fue aplicado para realizar la limpieza de los aisladores en el banco de transformadores de 900 MVA de la central electrica Laguna Verde, ubicada en el estado de Veracruz, en Mexico. Se propone una metodologia para la limpieza de los aisladores de transformadores, donde se identifican las principales variables a tomar en cuenta (el nivel de tension de los transformadores, nivel de contaminacion de los aisladores, determinacion del tiempo optimo de lavado, cantidad de precipitacion de agua, presion optima del chorro de agua, maxima conductividad del agua y las velocidades de los vientos) y se dan valores de referencias de estas. Ademas se presenta un analisis economico al aplicar un metodo de este tipo en una subestacion electrica.
Energy Technology Data Exchange (ETDEWEB)
Alanis M, J. [ININ, Departamento de Materiales Radiactivos, 52045 Ocoyoacac, Estado de Mexico (Mexico)
2003-12-15
In the National Institute of Nuclear Research (ININ) it was designed, built and proved a prototype to obtain {sup 32}P in form of H{sub 3} {sup 32}PO{sub 4}, starting from irradiated S{alpha}. The beginning of the prototype it is based on a distillation system in dry of the S{alpha} in nitrogen atmosphere, and in the formation of the ion {sup 32}PO{sub 4}{sup 3-} in acid solution. Due to the handling of radioactive material during the process, the prototype is inside a hot cell and it has a cylindrical oven that opens up lengthwise to the half, with controller of temperature and with a system of empty air for to transport reagents and products. The air-vacuum system is provided of filters and traps. The tests showed a recovery from 14 to 15% of the activity obtained during the irradiation. (Author)
Energy Technology Data Exchange (ETDEWEB)
Ansoleaga Deusto, I.; Urrutxi Armoriaga, P.
2000-07-01
Summary: The Garbigunes is Garbiker's star service because of its popularity. The main reasons are its free brand, an intelligent advertising work which promotes the environment culture of the citizens of Vizcaya, adequate equipment and installations and a responsible and efficient management. (Author)
Energy Technology Data Exchange (ETDEWEB)
Duarte A, C
2003-07-01
The {sup 32} P are a pure emitting radioisotope of maximum energy of 1.71 MeV with half life of 14.28 days that he has applications in the industry, in agriculture, in medicine, in biology and in ecology (6,11,12,13,17,21,22,23,24,25,26,27,28,29,30,31,32 33).The {sup 32} P can be used in the industry like radiotracer in the investigation of some operations and processes and as element of measurement of some industrial meters. In agriculture is used as radiotracer (29) in the investigation of diverse biological processes that have to do with the production of diverse nutritious products. In medicine has uses but very therapeutic mainly in the treatment of some become cancerous (28, 31, 25, 27) in the diagnosis of blood disorders (24) and like part of materials of production of aortic prosthesis (6). The {sup 32} P are also used in the molecular investigation in biology and in genetics (33), and in studies of ecosystems (32) and of DNA (22). One can obtain the {sup 32} P by means of diverse nuclear reactions depending on the material used as matter it prevails, since it doesn't exist in the nature. But anyone in the ways of obtaining it it should imply a process of radiochemical separation that involves so many steps like they are required, depending on the material used as matter prevails, of the purity with which he wants himself to obtain and of the resources that it has available. The objective of this work was design, to build and to prove a prototype to obtain the {sup 32} P to leave of the irradiation of S {alpha} with fast neutrons at experimental level, which implies also to design a process that contemplates diverse stages and procedures for each one of them. The process was outlined in five stages: matter purification prevails, preparation of irradiation capsules, irradiation of irradiation capsules, transport and opening capsules of irradiation and radiochemical separation. In the last stage it was where uses the prototype of radiochemical separation in basis to the outlined process and considering aspects of environmental and personal radiological safety, in such a way that the radiochemical separation carried out in two stages in the same prototype and with the less manipulation of the radioactive material.To know the functionality of the process and of the prototype, they were carried out three tests of these, in each one of those which the stages of the process were evaluated by means of mensuration of physicochemical parameters and by means of characterizations of the materials involved in these stages with diverse technical analytic instrumental: X-ray diffraction, X-ray fluorescence, scanning electron microscopy, high-purity Ge semiconductor detector proportional detector proportional of low bottom gas and liquid scintillation detector. The results of the process for stages showed that with the outlined method of purification of the matter prevails six of nine constituent elements they were removed of chemical sludges of the raw materials of the process, S {alpha}, and that with the process and the prototype of radiochemical separation it was reached to separate {sup 32} P of the S {alpha}. In general, it was reached to obtain {sup 32} P from S {alpha} irradiated with relatively small quantities of radiochemical impurities. (Author)
Energy Technology Data Exchange (ETDEWEB)
Castaneda J, G.; Delfin L, A.; Alvarado P, R.; Mazon R, R.; Ortega V, B. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: adl@nuclear.inin.mx
2003-07-01
The sipping technique, it has been used by several possessors of nuclear research reactors in its irradiated nuclear fuels, likewise in some fuel storage sites, with the objective of to determine the quantity of radioactivity that the fuel liberates in the means in that it is. The irradiated fuel in storage of some nuclear research reactors, its can have cracks that cross the cladding of the same one, generating the liberation of fission products that its need to determine to maintain safety measures appropriate as much as the fuel as of the facilities where they are. It doesn't exist until now, some method published for the non destructive sipping test technique. Based on that described, the Reactor Department of the National Institute of Nuclear Research, it has designed and built an inspection system of irradiated fuel that it will allow the detection of gassy fission products in site, and solids by means of the measurement of the activity of the Cs-137 contained in water samples. (Author)
Energy Technology Data Exchange (ETDEWEB)
Bonifacio M, J [Universidad Autonoma del Estado de Mexico. Facultad de Quimica. Toluca (Mexico)
1992-12-31
The purpose of this work consists in the design a radon-222 gas measurement system utilizing a surface barrier detector with the objective to obtain a more accurate measurement for this isotope through an alpha particle spectrum and so to address as to avoid the activity influence of the descendants of short half-life, which are too beta particles emitters, already other methods it must be correction series to obtain the real value of radon activity. Here are presented the general properties properties of radon, the experimental part description indicating the design to measure the radon-222 gas and its parts, as well as too the standard separation of radium-226 starting from carnotite mineral. Finally, it is presented the results obtained with a discussion about it. (Author) results obtained with a discussion about it. (Author)
Energy Technology Data Exchange (ETDEWEB)
Bonifacio, J.; Iturbe, J.L
1992-02-15
The study of the present work consists on designing a system to measure gas {sup 222} Rn, using a surface barrier detector, in order to obtaining a more accuracy measure of this isotope by means of an alpha particle spectra and thus to try to avoid the influence of the radioactivity of the isotope descendants of short half life, which are also emitting of alpha particles, since by other methods its should make a series of corrections to obtain the real value of the radon activity. (Author)
Energy Technology Data Exchange (ETDEWEB)
Bonifacio M, J. [Universidad Autonoma del Estado de Mexico. Facultad de Quimica. Toluca (Mexico)
1991-12-31
The purpose of this work consists in the design a radon-222 gas measurement system utilizing a surface barrier detector with the objective to obtain a more accurate measurement for this isotope through an alpha particle spectrum and so to address as to avoid the activity influence of the descendants of short half-life, which are too beta particles emitters, already other methods it must be correction series to obtain the real value of radon activity. Here are presented the general properties properties of radon, the experimental part description indicating the design to measure the radon-222 gas and its parts, as well as too the standard separation of radium-226 starting from carnotite mineral. Finally, it is presented the results obtained with a discussion about it. (Author) results obtained with a discussion about it. (Author)
Energy Technology Data Exchange (ETDEWEB)
Guardado Zavala, J.L.; Moreno Barraza, M.; Zazueta Pena, H.; Venegas Rebollar, V.; Melgoza Vazquez, E. [Instituto Tecnologico de Morelia, Morelia, Michoacan (Mexico)]. E-mail: lguarda@prodigy.net.mx; hzazuetapea@yahoo.com; vvenegas@yahoo.com; emelgoza@iimorelia.edu.mx
2010-01-15
An electro-thermal model for a Zinc Oxide (ZnO) surge arrester under contamination test is presented. The model is based in three sub-models: electrical, thermal and contamination, which interact in order to obtain the surge arrester performance under contamination tests. The electrical model is obtained from measurements and is based on a capacitance and a non-linear resistor. The thermal model takes into account the heat generated and dissipated by the column of varistors and its surroundings. The contamination is represented by dynamic impedance obtained from measurements in the arrester column during contamination tests. The full model is validated by calculating the temperature increase during contamination tests carried out in a two units ZnO surge arrester, class 190 kV. Finally, the results of the effect of several design and construction parameters in the voltage and temperature distribution in the arrester column during contamination tests are presented. [Spanish] Se presenta el modelo electro-termico para un apartarrayos de Oxido de Zinc (ZnO) durante pruebas de contaminacion. El modelo esta compuesto de tres sub-modelos: electrico, termico y de contaminacion, los cuales interactuan armonicamente para obtener el comportamiento del apartarrayos durante pruebas de contaminacion. El modelo electrico se obtiene de mediciones y esta compuesto de una capacitancia y una resistencia no-lineal. El modelo termico considera el calor generado y disipado en la columna de varistores y su entorno. La contaminacion se representa como una impedancia dinamica, cuyos valores se obtienen de mediciones en la columna del apartarrayos durante pruebas de contaminacion. El modelo se valida determinando el incremento de temperatura durante pruebas de contaminacion en un apartarrayos de ZnO de dos unidades clase 1990 kV. Finalmente, se presentan los resultados del impacto de diversos parametros de diseno y construccion en la distribucion de voltaje y temperatura en el apartarrayos
Energy Technology Data Exchange (ETDEWEB)
Flores Armenta, Magaly del Carmen; Ramirez Montes, Miguel [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Morelia, Michoacan (Mexico)]. E-mail: miguel.ramirez02@cfe.gob.mx
2010-01-15
Drilling bilateral geothermal wells has been conducted successfully in fields in the U.S., the Philippines and Japan, among other places. The reason for drilling a second leg in a well is to increase production by penetrating additional production zones. In this report, criteria are presented for selecting wells in Los Humeros, Pue., geothermal field to be considered for a second leg, taking into account the mechanical condition of the wells, geological targets, distances between wells, production characteristics and thermodynamic conditions. The cases of wells H-3, H-8, H-11, H-16, H-33, H-34 and H-36, which have low production, were reviewed. Wells H-3, H-8 and H-34 were selected as the best subjects for bi-directional drilling. A design is proposed for constructing a second leg in well H-8. [Spanish] La perforacion de pozos bilaterales se ha venido realizando de manera exitosa en campos geotermicos de Estados Unidos, Filipinas y Japon, entre otros. El objetivo de perforar una segunda pierna en un mismo pozo es incrementar su produccion, ya que habran mas zonas de produccion. En este reporte se presentan los criterios para la seleccion de pozos del campo geotermico de Los Humeros, Pue., candidatos para una segunda pierna, considerando el estado mecanico de los mismos, los objetivos geologicos, la distancia entre pozos, sus caracteristicas de produccion y sus condiciones termodinamicas. Para ello se revisaron los casos de los pozos H-3, H-8, H-11, H-16, H-33, H-34 y H-36, que presentan una produccion baja. Posteriormente, aplicando los criterios de evaluacion y con la informacion obtenida de cada pozo, se seleccionaron los pozos H-3, H-8 y H-34 como los que presentan mejores condiciones para la perforacion bidireccional. Finalmente, se establecio un diseno para la construccion de una segunda pierna en el pozo H-8.
SSC accelerator availability allocation
International Nuclear Information System (INIS)
Dixon, K.T.; Franciscovich, J.
1991-03-01
Superconducting Super Collider (SSC) operational availability is an area of major concern, judged by the Central Design Group to present such risk that use of modern engineering tools would be essential to program success. Experience has shown that as accelerator beam availability falls below about 80%, efficiency of physics experiments degrades rapidly due to inability to maintain adequate coincident accelerator and detector operation. For this reason, the SSC availability goal has been set at 80%, even though the Fermi National Accelerator Laboratory accelerator, with a fraction of the SSC's complexity, has only recently approached that level. This paper describes the allocation of the top-level goal to part-level reliability and maintainability requirements, and it gives the results of parameter sensitivity studies designed to help identify the best approach to achieve the needed system availability within funding and schedule constraints. 1 ref., 12 figs., 4 tabs
CERN. Geneva
2001-01-01
The talk summarizes the principles of particle acceleration and addresses problems related to storage rings like LEP and LHC. Special emphasis will be given to orbit stability, long term stability of the particle motion, collective effects and synchrotron radiation.
A study of reflex tandem accelerator
Energy Technology Data Exchange (ETDEWEB)
Nakajima, Takao; Morinobu, Shunpei; Gono, Yasuyuki; Sagara, Kenji; Sugimitsu, Tsuyoshi; Mitarai, Shiro; Nakamura, Hiroyuki; Ikeda, Nobuo; Morikawa, Tsuneyasu [Kyushu Univ., Fukuoka (Japan). Faculty of Science
1996-12-01
An investigation on `developing research theme and its realizing experimental apparatus` based on the tandem accelerator facility is executed. At a standpoint of recognition on essentiality of preparation, improvement or novel technical development capable of extreme increase in capacity of the tandem accelerator facility to form COE with high uniqueness, proposal of numerous ideas and their investigations and searches were conducted. In this paper, consideration results of `beam reacceleration using tandem accelerator` were shown as follows: (1) Short life unstable nuclei formed by nuclear reaction using tandem acceleration primary beam is ionized to negative and to reaccelerate by using the same tandem accelerator. And (2) by combination of plural electrons with the tandem primary accelerated beam, numbers of charge is reduced to reaccelerate by the tandem. (G.K.)
Compact multi-energy electron linear accelerators
International Nuclear Information System (INIS)
Tanabe, E.; Hamm, R.W.
1985-01-01
Two distinctly different concepts that have been developed for compact multi-energy, single-section, standing-wave electron linear accelerator structures are presented. These new concepts, which utilize (a) variable nearest neighbor couplings and (b) accelerating field phase switching, provide the capability of continuously varying the electron output energy from the accelerator without degrading the energy spectrum. These techniques also provide the means for continuously varying the energy spectrum while maintaining a given average electron energy, and have been tested successfully with several accelerators of length from 0.1 m to 1.9 m. Theoretical amd experimental results from these accelerators, and demonstrated applications of these techniques to medical and industrial linear accelerator technology will be described. In addition, possible new applications available to research and industry from these techniques are presented. (orig.)
Technology and applications of advanced accelerator concepts
Chou, Weiren
2016-01-01
Since its invention in the 1920s, particle accelerators have made tremendous progress in accelerator science, technology and applications. However, the fundamental acceleration principle, namely, to apply an external radiofrequency (RF) electric field to accelerate charged particles, remains unchanged. As this method (either room temperature RF or superconducting RF) is approaching its intrinsic limitation in acceleration gradient (measured in MeV/m), it becomes apparent that new methods with much higher acceleration gradient (measured in GeV/m) must be found for future very high energy accelerators as well as future compact (table-top or room-size) accelerators. This volume introduces a number of advanced accelerator concepts (AAC) — their principles, technologies and potential applications. For the time being, none of them stands out as a definitive direction in which to go. But these novel ideas are in hot pursuit and look promising. Furthermore, some AAC requires a high power laser system. This has the ...
The Spallation Neutron Source accelerator system design
Henderson, S.; Abraham, W.; Aleksandrov, A.; Allen, C.; Alonso, J.; Anderson, D.; Arenius, D.; Arthur, T.; Assadi, S.; Ayers, J.; Bach, P.; Badea, V.; Battle, R.; Beebe-Wang, J.; Bergmann, B.; Bernardin, J.; Bhatia, T.; Billen, J.; Birke, T.; Bjorklund, E.; Blaskiewicz, M.; Blind, B.; Blokland, W.; Bookwalter, V.; Borovina, D.; Bowling, S.; Bradley, J.; Brantley, C.; Brennan, J.; Brodowski, J.; Brown, S.; Brown, R.; Bruce, D.; Bultman, N.; Cameron, P.; Campisi, I.; Casagrande, F.; Catalan-Lasheras, N.; Champion, M.; Champion, M.; Chen, Z.; Cheng, D.; Cho, Y.; Christensen, K.; Chu, C.; Cleaves, J.; Connolly, R.; Cote, T.; Cousineau, S.; Crandall, K.; Creel, J.; Crofford, M.; Cull, P.; Cutler, R.; Dabney, R.; Dalesio, L.; Daly, E.; Damm, R.; Danilov, V.; Davino, D.; Davis, K.; Dawson, C.; Day, L.; Deibele, C.; Delayen, J.; DeLong, J.; Demello, A.; DeVan, W.; Digennaro, R.; Dixon, K.; Dodson, G.; Doleans, M.; Doolittle, L.; Doss, J.; Drury, M.; Elliot, T.; Ellis, S.; Error, J.; Fazekas, J.; Fedotov, A.; Feng, P.; Fischer, J.; Fox, W.; Fuja, R.; Funk, W.; Galambos, J.; Ganni, V.; Garnett, R.; Geng, X.; Gentzlinger, R.; Giannella, M.; Gibson, P.; Gillis, R.; Gioia, J.; Gordon, J.; Gough, R.; Greer, J.; Gregory, W.; Gribble, R.; Grice, W.; Gurd, D.; Gurd, P.; Guthrie, A.; Hahn, H.; Hardek, T.; Hardekopf, R.; Harrison, J.; Hatfield, D.; He, P.; Hechler, M.; Heistermann, F.; Helus, S.; Hiatt, T.; Hicks, S.; Hill, J.; Hill, J.; Hoff, L.; Hoff, M.; Hogan, J.; Holding, M.; Holik, P.; Holmes, J.; Holtkamp, N.; Hovater, C.; Howell, M.; Hseuh, H.; Huhn, A.; Hunter, T.; Ilg, T.; Jackson, J.; Jain, A.; Jason, A.; Jeon, D.; Johnson, G.; Jones, A.; Joseph, S.; Justice, A.; Kang, Y.; Kasemir, K.; Keller, R.; Kersevan, R.; Kerstiens, D.; Kesselman, M.; Kim, S.; Kneisel, P.; Kravchuk, L.; Kuneli, T.; Kurennoy, S.; Kustom, R.; Kwon, S.; Ladd, P.; Lambiase, R.; Lee, Y. Y.; Leitner, M.; Leung, K.-N.; Lewis, S.; Liaw, C.; Lionberger, C.; Lo, C. C.; Long, C.; Ludewig, H.; Ludvig, J.; Luft, P.; Lynch, M.; Ma, H.; MacGill, R.; Macha, K.; Madre, B.; Mahler, G.; Mahoney, K.; Maines, J.; Mammosser, J.; Mann, T.; Marneris, I.; Marroquin, P.; Martineau, R.; Matsumoto, K.; McCarthy, M.; McChesney, C.; McGahern, W.; McGehee, P.; Meng, W.; Merz, B.; Meyer, R.; Meyer, R.; Miller, B.; Mitchell, R.; Mize, J.; Monroy, M.; Munro, J.; Murdoch, G.; Musson, J.; Nath, S.; Nelson, R.; Nelson, R.; O`Hara, J.; Olsen, D.; Oren, W.; Oshatz, D.; Owens, T.; Pai, C.; Papaphilippou, I.; Patterson, N.; Patterson, J.; Pearson, C.; Pelaia, T.; Pieck, M.; Piller, C.; Plawski, T.; Plum, M.; Pogge, J.; Power, J.; Powers, T.; Preble, J.; Prokop, M.; Pruyn, J.; Purcell, D.; Rank, J.; Raparia, D.; Ratti, A.; Reass, W.; Reece, K.; Rees, D.; Regan, A.; Regis, M.; Reijonen, J.; Rej, D.; Richards, D.; Richied, D.; Rode, C.; Rodriguez, W.; Rodriguez, M.; Rohlev, A.; Rose, C.; Roseberry, T.; Rowton, L.; Roybal, W.; Rust, K.; Salazer, G.; Sandberg, J.; Saunders, J.; Schenkel, T.; Schneider, W.; Schrage, D.; Schubert, J.; Severino, F.; Shafer, R.; Shea, T.; Shishlo, A.; Shoaee, H.; Sibley, C.; Sims, J.; Smee, S.; Smith, J.; Smith, K.; Spitz, R.; Staples, J.; Stein, P.; Stettler, M.; Stirbet, M.; Stockli, M.; Stone, W.; Stout, D.; Stovall, J.; Strelo, W.; Strong, H.; Sundelin, R.; Syversrud, D.; Szajbler, M.; Takeda, H.; Tallerico, P.; Tang, J.; Tanke, E.; Tepikian, S.; Thomae, R.; Thompson, D.; Thomson, D.; Thuot, M.; Treml, C.; Tsoupas, N.; Tuozzolo, J.; Tuzel, W.; Vassioutchenko, A.; Virostek, S.; Wallig, J.; Wanderer, P.; Wang, Y.; Wang, J. G.; Wangler, T.; Warren, D.; Wei, J.; Weiss, D.; Welton, R.; Weng, J.; Weng, W.-T.; Wezensky, M.; White, M.; Whitlatch, T.; Williams, D.; Williams, E.; Wilson, K.; Wiseman, M.; Wood, R.; Wright, P.; Wu, A.; Ybarrolaza, N.; Young, K.; Young, L.; Yourd, R.; Zachoszcz, A.; Zaltsman, A.; Zhang, S.; Zhang, W.; Zhang, Y.; Zhukov, A.
2014-11-01
The Spallation Neutron Source (SNS) was designed and constructed by a collaboration of six U.S. Department of Energy national laboratories. The SNS accelerator system consists of a 1 GeV linear accelerator and an accumulator ring providing 1.4 MW of proton beam power in microsecond-long beam pulses to a liquid mercury target for neutron production. The accelerator complex consists of a front-end negative hydrogen-ion injector system, an 87 MeV drift tube linear accelerator, a 186 MeV side-coupled linear accelerator, a 1 GeV superconducting linear accelerator, a 248-m circumference accumulator ring and associated beam transport lines. The accelerator complex is supported by ~100 high-power RF power systems, a 2 K cryogenic plant, ~400 DC and pulsed power supply systems, ~400 beam diagnostic devices and a distributed control system handling ~100,000 I/O signals. The beam dynamics design of the SNS accelerator is presented, as is the engineering design of the major accelerator subsystems.
Accelerators and the Accelerator Community
Energy Technology Data Exchange (ETDEWEB)
Malamud, Ernest; Sessler, Andrew
2008-06-01
In this paper, standing back--looking from afar--and adopting a historical perspective, the field of accelerator science is examined. How it grew, what are the forces that made it what it is, where it is now, and what it is likely to be in the future are the subjects explored. Clearly, a great deal of personal opinion is invoked in this process.
Accelerators and the Accelerator Community
International Nuclear Information System (INIS)
Malamud, Ernest; Sessler, Andrew
2008-01-01
In this paper, standing back--looking from afar--and adopting a historical perspective, the field of accelerator science is examined. How it grew, what are the forces that made it what it is, where it is now, and what it is likely to be in the future are the subjects explored. Clearly, a great deal of personal opinion is invoked in this process
Delivery of single accelerated particles
International Nuclear Information System (INIS)
McNulty, P.J.; Pease, V.P.; Bond, V.P.; Schimmerling, W.; Vosburgh, K.G.; Crebbin, K.; Everette, W.; Howard, J.
1978-01-01
It is desirable for certain experiments involving accelerators to have the capability of delivering just a single beam particle to the target area. The essential features of such a one-at-a-time facility are discussed. Two such facilities are described which were implemented at high-energy heavy ion accelerators without having to make major structural changes in the existing beam lines or substantially interfering with other accelerator uses. Two accelerator facilities are described which had the capability of delivering a single beam particle to the target area. This feature is necessary in certain experiments investigating visual phenomena induced by charged particles, other single particle interactions in biology, and other experiments in which the low intensities of cosmic rays need to be simulated. Both facilities were implemented without having to make structural changes in the existing beam lines or substantially interfering with other accelerator uses. (Auth.)
Industrial accelerators and their applications
Hamm, Marianne E
2012-01-01
This unique new book is a comprehensive review of the many current industrial applications of particle accelerators, written by experts in each of these fields. Readers will gain a broad understanding of the principles of these applications, the extent to which they are employed, and the accelerator technology utilized. The book also serves as a thorough introduction to these fields for non-experts and laymen. Due to the increased interest in industrial applications, there is a growing interest among accelerator physicists and many other scientists worldwide in understanding how accelerators are used in various applications. The government agencies that fund scientific research with accelerators are also seeking more information on the many commercial applications that have been or can be developed with the technology developments they are funding. Many industries are also doing more research on how they can improve their products or processes using particle beams.
"small ACCELERATORS" 24 May - 2 June 2005
2005-01-01
CERN Accelerator School and Kernfysisch Versneller Instituut (KVI) Groningen, the Netherlands announce a course on "Small Accelerators", Hotel Golden Tulip Drenthe, Zeegse, the Netherlands, 24 May - 2 June 2005. This specialised course is dedicated to the physics and the main applications of small accelerators. The course will review the different accelerator types as well as their specificities in terms of accelerator physics.
Hamburg Accelerator Conference (2)
Energy Technology Data Exchange (ETDEWEB)
Wilson, Edmund J.N. [CERN Accelerator School (Switzerland)
1992-11-15
From 20-24 July, Hamburg welcomed the Fifteenth International Conference on High Energy Accelerators (HEACC). The HEACC Conference traditionally reviews the status of all major accelerator projects whether they are already running like clockwork, still in the construction phase, or waiting impatiently for financial approval.
Hamburg Accelerator Conference (2)
International Nuclear Information System (INIS)
Wilson, Edmund J.N.
1992-01-01
From 20-24 July, Hamburg welcomed the Fifteenth International Conference on High Energy Accelerators (HEACC). The HEACC Conference traditionally reviews the status of all major accelerator projects whether they are already running like clockwork, still in the construction phase, or waiting impatiently for financial approval
Application of accelerator in the medical aspects
International Nuclear Information System (INIS)
Shi Lisheng; Wang Bairong; Yang Zhongping
2014-01-01
In recent years, the human life span compared with before there is an obvious increase in. With the extension of life, cancer incidence is increasing, at the same time, the diagnosis and treatment of cancer has been the development of. Based on the review of the past and present situation of diagnosis and treatment of cancer, the accelerator and the future to introduce, divided into the accelerator treatment, cancer diagnosis, accelerator accelerator with radioactive isotopes, medical accelerator conditions and medical accelerator built five content. (authors)
Heavy ion accelerators for inertial fusion
International Nuclear Information System (INIS)
Rubbia, C.
1992-01-01
Particle accelerators are used for accelerating the elementary, stable and separable constituents of matters to relativistic speed. These beams are of fundamental interest in the study on the ultimate constituents of matters and their interaction. Particle accelerators are the most promising driver for the fusion power reactors based on inertial confinement. The principle of inertial confinement fusion, radiation driven indirect drive, the accelerator complex and so on are described. (K.I.)
Workshop on Accelerator Operation (WAO 2001)
International Nuclear Information System (INIS)
Bailey, R.
2001-01-01
The 3rd Workshop on Accelerator Operation (WAO 2001) followed earlier workshops in 1996 and 1998. Most topics relevant for the efficient and effective operation of accelerators were covered. These included the tools and utilities necessary in the control rooms; the organization of accelerator operation (process monitoring, shift work, stress); the monitoring of beam quality; safety issues and standards; and questions particularly relevant for superconducting accelerators, in particular cryogenics. (author)
Summary report on large HVEC accelerators
International Nuclear Information System (INIS)
Thieberger, P.
1981-01-01
The main features are described of the ten presently operating large HVEC tandem accelerators and of four additional HVEC accelerators which are in different stages of testing, construction or planning. Present performance characteristics are discussed as well as available information about long term reliability. Some recent improvements are mentioned and comparisons are drawn for acceleration tube gradients in various different configurations and accelerators. Finally, some possible future developments are indicated