Enhanced Verification Test Suite for Physics Simulation Codes

Energy Technology Data Exchange (ETDEWEB)

Kamm, J R; Brock, J S; Brandon, S T; Cotrell, D L; Johnson, B; Knupp, P; Rider, W; Trucano, T; Weirs, V G

2008-10-10

This document discusses problems with which to augment, in quantity and in quality, the existing tri-laboratory suite of verification problems used by Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and Sandia National Laboratories (SNL). The purpose of verification analysis is demonstrate whether the numerical results of the discretization algorithms in physics and engineering simulation codes provide correct solutions of the corresponding continuum equations. The key points of this document are: (1) Verification deals with mathematical correctness of the numerical algorithms in a code, while validation deals with physical correctness of a simulation in a regime of interest. This document is about verification. (2) The current seven-problem Tri-Laboratory Verification Test Suite, which has been used for approximately five years at the DOE WP laboratories, is limited. (3) Both the methodology for and technology used in verification analysis have evolved and been improved since the original test suite was proposed. (4) The proposed test problems are in three basic areas: (a) Hydrodynamics; (b) Transport processes; and (c) Dynamic strength-of-materials. (5) For several of the proposed problems we provide a 'strong sense verification benchmark', consisting of (i) a clear mathematical statement of the problem with sufficient information to run a computer simulation, (ii) an explanation of how the code result and benchmark solution are to be evaluated, and (iii) a description of the acceptance criterion for simulation code results. (6) It is proposed that the set of verification test problems with which any particular code be evaluated include some of the problems described in this document. Analysis of the proposed verification test problems constitutes part of a necessary--but not sufficient--step that builds confidence in physics and engineering simulation codes. More complicated test cases, including physics models of

Vadose zone flow convergence test suite

Energy Technology Data Exchange (ETDEWEB)

Butcher, B. T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-06-05

Performance Assessment (PA) simulations for engineered disposal systems at the Savannah River Site involve highly contrasting materials and moisture conditions at and near saturation. These conditions cause severe convergence difficulties that typically result in unacceptable convergence or long simulation times or excessive analyst effort. Adequate convergence is usually achieved in a trial-anderror manner by applying under-relaxation to the Saturation or Pressure variable, in a series of everdecreasing RELAxation values. SRNL would like a more efficient scheme implemented inside PORFLOW to achieve flow convergence in a more reliable and efficient manner. To this end, a suite of test problems that illustrate these convergence problems is provided to facilitate diagnosis and development of an improved convergence strategy. The attached files are being transmitted to you describing the test problem and proposed resolution.

Effectiveness comparison of partially executed t-way test suite based generated by existing strategies

Science.gov (United States)

Othman, Rozmie R.; Ahmad, Mohd Zamri Zahir; Ali, Mohd Shaiful Aziz Rashid; Zakaria, Hasneeza Liza; Rahman, Md. Mostafijur

2015-05-01

Consuming 40 to 50 percent of software development cost, software testing is one of the most resource consuming activities in software development lifecycle. To ensure an acceptable level of quality and reliability of a typical software product, it is desirable to test every possible combination of input data under various configurations. Due to combinatorial explosion problem, considering all exhaustive testing is practically impossible. Resource constraints, costing factors as well as strict time-to-market deadlines are amongst the main factors that inhibit such consideration. Earlier work suggests that sampling strategy (i.e. based on t-way parameter interaction or called as t-way testing) can be effective to reduce number of test cases without effecting the fault detection capability. However, for a very large system, even t-way strategy will produce a large test suite that need to be executed. In the end, only part of the planned test suite can be executed in order to meet the aforementioned constraints. Here, there is a need for test engineers to measure the effectiveness of partially executed test suite in order for them to assess the risk they have to take. Motivated by the abovementioned problem, this paper presents the effectiveness comparison of partially executed t-way test suite generated by existing strategies using tuples coverage method. Here, test engineers can predict the effectiveness of the testing process if only part of the original test cases is executed.

An Effective Strategy to Build Up a Balanced Test Suite for Spectrum-Based Fault Localization

Directory of Open Access Journals (Sweden)

Ning Li

2016-01-01

Full Text Available During past decades, many automated software faults diagnosis techniques including Spectrum-Based Fault Localization (SBFL have been proposed to improve the efficiency of software debugging activity. In the field of SBFL, suspiciousness calculation is closely related to the number of failed and passed test cases. Studies have shown that the ratio of the number of failed and passed test case has more significant impact on the accuracy of SBFL than the total number of test cases, and a balanced test suite is more beneficial to improving the accuracy of SBFL. Based on theoretical analysis, we proposed an PNF (Passed test cases, Not execute Faulty statement strategy to reduce test suite and build up a more balanced one for SBFL, which can be used in regression testing. We evaluated the strategy making experiments using the Siemens program and Space program. Experiments indicated that our PNF strategy can be used to construct a new test suite effectively. Compared with the original test suite, the new one has smaller size (average 90% test case was reduced in experiments and more balanced ratio of failed test cases to passed test cases, while it has the same statement coverage and fault localization accuracy.

Validation suite for MCNP

International Nuclear Information System (INIS)

Mosteller, Russell D.

2002-01-01

Two validation suites, one for criticality and another for radiation shielding, have been defined and tested for the MCNP Monte Carlo code. All of the cases in the validation suites are based on experiments so that calculated and measured results can be compared in a meaningful way. The cases in the validation suites are described, and results from those cases are discussed. For several years, the distribution package for the MCNP Monte Carlo code1 has included an installation test suite to verify that MCNP has been installed correctly. However, the cases in that suite have been constructed primarily to test options within the code and to execute quickly. Consequently, they do not produce well-converged answers, and many of them are physically unrealistic. To remedy these deficiencies, sets of validation suites are being defined and tested for specific types of applications. All of the cases in the validation suites are based on benchmark experiments. Consequently, the results from the measurements are reliable and quantifiable, and calculated results can be compared with them in a meaningful way. Currently, validation suites exist for criticality and radiation-shielding applications.

A comparison of two Shuttle launch and entry suits - Reach envelope, isokinetic strength, and treadmill tests

Science.gov (United States)

Schafer, Lauren E.; Rajulu, Sudhakar L.; Klute, Glenn K.

1992-01-01

A quantification has been conducted of any existing differences between the performance, in operational conditions, of the Space Shuttle crew Launch Entry Suit (LES) and the new Advanced Crew Escape Suit (ACES). While LES is a partial-pressure suit, the ACES system which is being considered as a replacement for LES is a full-pressure suit. Three tests have been conducted with six subjects to ascertain the suits' reach envelope, strength, and treadmill performance. No significant operational differences were found between the two suit designs.

Engineering Abstractions in Model Checking and Testing

DEFF Research Database (Denmark)

Achenbach, Michael; Ostermann, Klaus

2009-01-01

Abstractions are used in model checking to tackle problems like state space explosion or modeling of IO. The application of these abstractions in real software development processes, however, lacks engineering support. This is one reason why model checking is not widely used in practice yet...... and testing is still state of the art in falsification. We show how user-defined abstractions can be integrated into a Java PathFinder setting with tools like AspectJ or Javassist and discuss implications of remaining weaknesses of these tools. We believe that a principled engineering approach to designing...... and implementing abstractions will improve the applicability of model checking in practice....

46 CFR 160.171-17 - Approval testing for adult size immersion suit.

Science.gov (United States)

2010-10-01

... test described in § 160.171-17(d). (c) Mobility and flotation tests. The mobility and flotation... suit at the beginning of the period of flotation by more than 200 grams. (11) Impact. While wearing a... is required for this test: (i) A sealed copper or aluminum can that has at least two parallel flat...

T3i: A Tool for Generating and Querying Test Suites for Java

NARCIS (Netherlands)

Prasetya, I.S.W.B.

2015-01-01

T3i is an automated unit-testing tool to test Java classes. To expose interactions T3i generates test-cases in the form of sequences of calls to the methods of the target class. What separates it from other testing tools is that it treats test suites as first class objects and allows users to e.g.

Automatic Model-Based Generation of Parameterized Test Cases Using Data Abstraction

NARCIS (Netherlands)

Calamé, Jens R.; Ioustinova, Natalia; Romijn, J.M.T.; Smith, G.; van de Pol, Jan Cornelis

2007-01-01

Developing test suites is a costly and error-prone process. Model-based test generation tools facilitate this process by automatically generating test cases from system models. The applicability of these tools, however, depends on the size of the target systems. Here, we propose an approach to

Fixed Points on Abstract Structures without the Equality Test

DEFF Research Database (Denmark)

Korovina, Margarita

2002-01-01

The aim of this talk is to present a study of definability properties of fixed points of effective operators on abstract structures without the equality test. The question of definability of fixed points of -operators on abstract structures with equality was first studied by Gandy, Barwise, Mosch...

Test suite for image-based motion estimation of the brain and tongue

Science.gov (United States)

Ramsey, Jordan; Prince, Jerry L.; Gomez, Arnold D.

2017-03-01

Noninvasive analysis of motion has important uses as qualitative markers for organ function and to validate biomechanical computer simulations relative to experimental observations. Tagged MRI is considered the gold standard for noninvasive tissue motion estimation in the heart, and this has inspired multiple studies focusing on other organs, including the brain under mild acceleration and the tongue during speech. As with other motion estimation approaches, using tagged MRI to measure 3D motion includes several preprocessing steps that affect the quality and accuracy of estimation. Benchmarks, or test suites, are datasets of known geometries and displacements that act as tools to tune tracking parameters or to compare different motion estimation approaches. Because motion estimation was originally developed to study the heart, existing test suites focus on cardiac motion. However, many fundamental differences exist between the heart and other organs, such that parameter tuning (or other optimization) with respect to a cardiac database may not be appropriate. Therefore, the objective of this research was to design and construct motion benchmarks by adopting an "image synthesis" test suite to study brain deformation due to mild rotational accelerations, and a benchmark to model motion of the tongue during speech. To obtain a realistic representation of mechanical behavior, kinematics were obtained from finite-element (FE) models. These results were combined with an approximation of the acquisition process of tagged MRI (including tag generation, slice thickness, and inconsistent motion repetition). To demonstrate an application of the presented methodology, the effect of motion inconsistency on synthetic measurements of head- brain rotation and deformation was evaluated. The results indicated that acquisition inconsistency is roughly proportional to head rotation estimation error. Furthermore, when evaluating non-rigid deformation, the results suggest that

RAJA Performance Suite

Energy Technology Data Exchange (ETDEWEB)

2017-09-01

The RAJA Performance Suite is designed to evaluate performance of the RAJA performance portability library on a wide variety of important high performance computing (HPC) algorithmic lulmels. These kernels assess compiler optimizations and various parallel programming model backends accessible through RAJA, such as OpenMP, CUDA, etc. The Initial version of the suite contains 25 computational kernels, each of which appears in 6 variants: Baseline SequcntiaJ, RAJA SequentiaJ, Baseline OpenMP, RAJA OpenMP, Baseline CUDA, RAJA CUDA. All variants of each kernel perform essentially the same mathematical operations and the loop body code for each kernel is identical across all variants. There are a few kernels, such as those that contain reduction operations, that require CUDA-specific coding for their CUDA variants. ActuaJ computer instructions executed and how they run in parallel differs depending on the parallel programming model backend used and which optimizations are perfonned by the compiler used to build the Perfonnance Suite executable. The Suite will be used primarily by RAJA developers to perform regular assessments of RAJA performance across a range of hardware platforms and compilers as RAJA features are being developed. It will also be used by LLNL hardware and software vendor panners for new defining requirements for future computing platform procurements and acceptance testing. In particular, the RAJA Performance Suite will be used for compiler acceptance testing of the upcoming CORAUSierra machine {initial LLNL delivery expected in late-2017/early 2018) and the CORAL-2 procurement. The Suite will aJso be used to generate concise source code reproducers of compiler and runtime issues we uncover so that we may provide them to relevant vendors to be fixed.

Space Suit Joint Torque Measurement Method Validation

Science.gov (United States)

Valish, Dana; Eversley, Karina

2012-01-01

In 2009 and early 2010, a test method was developed and performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits. This was done in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design met the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future development programs. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis; the results indicated a significant variance in values reported for a subset of the re-tested joints. Potential variables that could have affected the data were identified and a third round of testing was conducted in an attempt to eliminate and/or quantify the effects of these variables. The results of the third test effort will be used to determine whether or not the proposed joint torque methodology can be applied to future space suit development contracts.

Modification and Test of the CSU-13 B/P G-Suit for Use in the F/A-22

National Research Council Canada - National Science Library

Balldin, Ulf; O'Connor, Robert; Isdahl, Wayne; Werchan, Paul

2005-01-01

...., burst leakage, and fill rate up to +9 G. Six human subjects were tested in the centrifuge with the CSU 13 B/P G-suit with hose inlet on the right or left side, and with COMBAT EDGE and Advanced Technology G Suit (CE-ATAGS...

Hybrid Enhanced Epidermal SpaceSuit Design Approaches

Science.gov (United States)

Jessup, Joseph M.

A Space suit that does not rely on gas pressurization is a multi-faceted problem that requires major stability controls to be incorporated during design and construction. The concept of Hybrid Epidermal Enhancement space suit integrates evolved human anthropomorphic and physiological adaptations into its functionality, using commercially available bio-medical technologies to address shortcomings of conventional gas pressure suits, and the impracticalities of MCP suits. The prototype HEE Space Suit explored integumentary homeostasis, thermal control and mobility using advanced bio-medical materials technology and construction concepts. The goal was a space suit that functions as an enhanced, multi-functional bio-mimic of the human epidermal layer that works in attunement with the wearer rather than as a separate system. In addressing human physiological requirements for design and construction of the HEE suit, testing regimes were devised and integrated into the prototype which was then subject to a series of detailed tests using both anatomical reproduction methods and human subject.

Characterizing the Influence of Abstraction in Full-Scale Wind Turbine Nacelle Testing: Preprint

Energy Technology Data Exchange (ETDEWEB)

Schkoda, Ryan; Bibo, Amin; Guo, Yi; Lambert, Scott; Wallen, Robb

2016-08-01

In recent years, there has been a growing interest in full-scale wind turbine nacelle testing to complement individual component testing. As a result, several wind turbine nacelle test benches have been built to perform such testing with the intent of loading the integrated components as they are in the field. However, when mounted on a test bench the nacelle is not on the top of a tower and does not have blades attached to it--this is a form of abstraction. This paper aims to quantify the influence of such an abstraction on the dynamic response of the nacelle through a series of simulation case studies. The responses of several nacelle components are studied including the main bearing, main shaft, gearbox supports, generator, and yaw bearing interface. Results are presented to highlight the differences in the dynamic response of the nacelle caused by the abstraction. Additionally, the authors provide recommendations for mitigating the effects of the abstraction.

Space Suit Portable Life Support System (PLSS) 2.0 Unmanned Vacuum Environment Testing

Science.gov (United States)

Watts, Carly; Vogel, Matthew

2016-01-01

For the first time in more than 30 years, an advanced space suit Portable Life Support System (PLSS) design was operated inside a vacuum chamber representative of the flight operating environment. The test article, PLSS 2.0, was the second system-level integrated prototype of the advanced PLSS design, following the PLSS 1.0 Breadboard that was developed and tested throughout 2011. Whereas PLSS 1.0 included five technology development components with the balance the system simulated using commercial-off-the-shelf items, PLSS 2.0 featured first generation or later prototypes for all components less instrumentation, tubing and fittings. Developed throughout 2012, PLSS 2.0 was the first attempt to package the system into a flight-like representative volume. PLSS 2.0 testing included an extensive functional evaluation known as Pre-Installation Acceptance (PIA) testing, Human-in-the-Loop testing in which the PLSS 2.0 prototype was integrated via umbilicals to a manned prototype space suit for 19 two-hour simulated EVAs, and unmanned vacuum environment testing. Unmanned vacuum environment testing took place from 1/9/15-7/9/15 with PLSS 2.0 located inside a vacuum chamber. Test sequences included performance mapping of several components, carbon dioxide removal evaluations at simulated intravehicular activity (IVA) conditions, a regulator pressure schedule assessment, and culminated with 25 simulated extravehicular activities (EVAs). During the unmanned vacuum environment test series, PLSS 2.0 accumulated 378 hours of integrated testing including 291 hours of operation in a vacuum environment and 199 hours of simulated EVA time. The PLSS prototype performed nominally throughout the test series, with two notable exceptions including a pump failure and a Spacesuit Water Membrane Evaporator (SWME) leak, for which post-test failure investigations were performed. In addition to generating an extensive database of PLSS 2.0 performance data, achievements included requirements and

Phylemon 2.0: a suite of web-tools for molecular evolution, phylogenetics, phylogenomics and hypotheses testing.

Science.gov (United States)

Sánchez, Rubén; Serra, François; Tárraga, Joaquín; Medina, Ignacio; Carbonell, José; Pulido, Luis; de María, Alejandro; Capella-Gutíerrez, Salvador; Huerta-Cepas, Jaime; Gabaldón, Toni; Dopazo, Joaquín; Dopazo, Hernán

2011-07-01

Phylemon 2.0 is a new release of the suite of web tools for molecular evolution, phylogenetics, phylogenomics and hypotheses testing. It has been designed as a response to the increasing demand of molecular sequence analyses for experts and non-expert users. Phylemon 2.0 has several unique features that differentiates it from other similar web resources: (i) it offers an integrated environment that enables evolutionary analyses, format conversion, file storage and edition of results; (ii) it suggests further analyses, thereby guiding the users through the web server; and (iii) it allows users to design and save phylogenetic pipelines to be used over multiple genes (phylogenomics). Altogether, Phylemon 2.0 integrates a suite of 30 tools covering sequence alignment reconstruction and trimming; tree reconstruction, visualization and manipulation; and evolutionary hypotheses testing.

Phylemon 2.0: a suite of web-tools for molecular evolution, phylogenetics, phylogenomics and hypotheses testing

Science.gov (United States)

Sánchez, Rubén; Serra, François; Tárraga, Joaquín; Medina, Ignacio; Carbonell, José; Pulido, Luis; de María, Alejandro; Capella-Gutíerrez, Salvador; Huerta-Cepas, Jaime; Gabaldón, Toni; Dopazo, Joaquín; Dopazo, Hernán

2011-01-01

Phylemon 2.0 is a new release of the suite of web tools for molecular evolution, phylogenetics, phylogenomics and hypotheses testing. It has been designed as a response to the increasing demand of molecular sequence analyses for experts and non-expert users. Phylemon 2.0 has several unique features that differentiates it from other similar web resources: (i) it offers an integrated environment that enables evolutionary analyses, format conversion, file storage and edition of results; (ii) it suggests further analyses, thereby guiding the users through the web server; and (iii) it allows users to design and save phylogenetic pipelines to be used over multiple genes (phylogenomics). Altogether, Phylemon 2.0 integrates a suite of 30 tools covering sequence alignment reconstruction and trimming; tree reconstruction, visualization and manipulation; and evolutionary hypotheses testing. PMID:21646336

TTCN-3 for distributed testing embedded systems

NARCIS (Netherlands)

Blom, S.C.C.; Deiß, T.; Ioustinova, N.; Kontio, A.; Pol, van de J.C.; Rennoch, A.; Sidorova, N.; Virbitskaite, I.; Voronkov, A.

2007-01-01

Abstract. TTCN-3 is a standardized language for specifying and executing test suites that is particularly popular for testing embedded systems. Prior to testing embedded software in a target environment, the software is usually tested in the host environment. Executing in the host environment often

Correction factors for assessing immersion suits under harsh conditions.

Science.gov (United States)

Power, Jonathan; Tikuisis, Peter; Ré, António Simões; Barwood, Martin; Tipton, Michael

2016-03-01

Many immersion suit standards require testing of thermal protective properties in calm, circulating water while these suits are typically used in harsher environments where they often underperform. Yet it can be expensive and logistically challenging to test immersion suits in realistic conditions. The goal of this work was to develop a set of correction factors that would allow suits to be tested in calm water yet ensure they will offer sufficient protection in harsher conditions. Two immersion studies, one dry and the other with 500 mL of water within the suit, were conducted in wind and waves to measure the change in suit insulation. In both studies, wind and waves resulted in a significantly lower immersed insulation value compared to calm water. The minimum required thermal insulation for maintaining heat balance can be calculated for a given mean skin temperature, metabolic heat production, and water temperature. Combining the physiological limits of sustainable cold water immersion and actual suit insulation, correction factors can be deduced for harsh conditions compared to calm. The minimum in-situ suit insulation to maintain thermal balance is 1.553-0.0624·TW + 0.00018·TW(2) for a dry calm condition. Multiplicative correction factors to the above equation are 1.37, 1.25, and 1.72 for wind + waves, 500 mL suit wetness, and both combined, respectively. Calm water certification tests of suit insulation should meet or exceed the minimum in-situ requirements to maintain thermal balance, and correction factors should be applied for a more realistic determination of minimum insulation for harsh conditions. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

Durable Suit Bladder with Improved Water Permeability for Pressure and Environment Suits

Science.gov (United States)

Bue, Grant C.; Kuznetz, Larry; Orndoff, Evelyne; Tang, Henry; Aitchison, Lindsay; Ross, Amy

2009-01-01

Water vapor permeability is shown to be useful in rejecting heat and managing moisture accumulation in launch-and-entry pressure suits. Currently this is accomplished through a porous Gortex layer in the Advanced Crew and Escape Suit (ACES) and in the baseline design of the Constellation Suit System Element (CSSE) Suit 1. Non-porous dense monolithic membranes (DMM) that are available offer potential improvements for water vapor permeability with reduced gas leak. Accordingly, three different pressure bladder materials were investigated for water vapor permeability and oxygen leak: ElasthaneTM 80A (thermoplastic polyether urethane) provided from stock polymer material and two custom thermoplastic polyether urethanes. Water vapor, carbon dioxide and oxygen permeability of the DMM's was measured in a 0.13 mm thick stand-alone layer, a 0.08 mm and 0.05 mm thick layer each bonded to two different nylon and polyester woven reinforcing materials. Additional water vapor permeability and mechanical compression measurements were made with the reinforced 0.05 mm thick layers, further bonded with a polyester wicking and overlaid with moistened polyester fleece thermal underwear .This simulated the pressure from a supine crew person. The 0.05 mm thick nylon reinforced sample with polyester wicking layer was further mechanically tested for wear and abrasion. Concepts for incorporating these materials in launch/entry and Extravehicular Activity pressure suits are presented.

Advanced EVA Suit Camera System Development Project

Science.gov (United States)

Mock, Kyla

2016-01-01

The National Aeronautics and Space Administration (NASA) at the Johnson Space Center (JSC) is developing a new extra-vehicular activity (EVA) suit known as the Advanced EVA Z2 Suit. All of the improvements to the EVA Suit provide the opportunity to update the technology of the video imagery. My summer internship project involved improving the video streaming capabilities of the cameras that will be used on the Z2 Suit for data acquisition. To accomplish this, I familiarized myself with the architecture of the camera that is currently being tested to be able to make improvements on the design. Because there is a lot of benefit to saving space, power, and weight on the EVA suit, my job was to use Altium Design to start designing a much smaller and simplified interface board for the camera's microprocessor and external components. This involved checking datasheets of various components and checking signal connections to ensure that this architecture could be used for both the Z2 suit and potentially other future projects. The Orion spacecraft is a specific project that may benefit from this condensed camera interface design. The camera's physical placement on the suit also needed to be determined and tested so that image resolution can be maximized. Many of the options of the camera placement may be tested along with other future suit testing. There are multiple teams that work on different parts of the suit, so the camera's placement could directly affect their research or design. For this reason, a big part of my project was initiating contact with other branches and setting up multiple meetings to learn more about the pros and cons of the potential camera placements we are analyzing. Collaboration with the multiple teams working on the Advanced EVA Z2 Suit is absolutely necessary and these comparisons will be used as further progress is made for the overall suit design. This prototype will not be finished in time for the scheduled Z2 Suit testing, so my time was

SUIT

DEFF Research Database (Denmark)

Algreen-Ussing, Gregers; Wedebrunn, Ola

2003-01-01

Leaflet om project SUIT udgivet af European Commission. Tryksagen forklarer i korte ord resultatet af projektet SUIT. Kulturværdier i Miljøspørgsmål. Vurdering af projekter og indvirkning på miljø....

Use MACES IVA Suit for EVA Mobility Evaluations

Science.gov (United States)

Watson, Richard D.

2014-01-01

The use of an Intra-Vehicular Activity (IVA) suit for a spacewalk or Extra-Vehicular Activity (EVA) was evaluated for mobility and usability in the Neutral Buoyancy Lab (NBL) environment. The Space Shuttle Advanced Crew Escape Suit (ACES) has been modified (MACES) to integrate with the Orion spacecraft. The first several missions of the Orion MPCV spacecraft will not have mass available to carry an EVA specific suit so any EVA required will have to be performed by the MACES. Since the MACES was not designed with EVA in mind, it was unknown what mobility the suit would be able to provide for an EVA or if a person could perform useful tasks for an extended time inside the pressurized suit. The suit was evaluated in multiple NBL runs by a variety of subjects including crewmembers with significant EVA experience. Various functional mobility tasks performed included: translation, body positioning, carrying tools, body stabilization, equipment handling, and use of tools. Hardware configurations included with and without TMG, suit with IVA gloves and suit with EVA gloves. Most tasks were completed on ISS mockups with existing EVA tools. Some limited tasks were completed with prototype tools on a simulated rocky surface. Major findings include: demonstration of the ability to weigh-out the suit, understanding the need to have subjects perform multiple runs prior to getting feedback, determination of critical sizing factors, and need for adjustment of suit work envelop. The early testing has demonstrated the feasibility of EVA's limited duration and limited scope. Further testing is required with more flight like tasking and constraints to validate these early results. If the suit is used for EVA, it will require mission specific modifications for umbilical management or PLSS integration, safety tether attachment, and tool interfaces. These evaluations are continuing through calendar year 2014.

Enhanced verification test suite for physics simulation codes

Energy Technology Data Exchange (ETDEWEB)

Kamm, James R.; Brock, Jerry S.; Brandon, Scott T.; Cotrell, David L.; Johnson, Bryan; Knupp, Patrick; Rider, William J.; Trucano, Timothy G.; Weirs, V. Gregory

2008-09-01

This document discusses problems with which to augment, in quantity and in quality, the existing tri-laboratory suite of verification problems used by Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and Sandia National Laboratories (SNL). The purpose of verification analysis is demonstrate whether the numerical results of the discretization algorithms in physics and engineering simulation codes provide correct solutions of the corresponding continuum equations.

Alterations in MAST suit pressure with changes in ambient temperature.

Science.gov (United States)

Sanders, A B; Meislin, H W; Daub, E

1983-01-01

A study was undertaken to test the hypothesis that change in ambient air temperature has an effect on MAST suit pressure according to the ideal gas law. Two different MAST suits were tested on Resusci-Annie dummies. The MAST suits were applied in a cold room at 4.4 degrees C and warmed to 44 degrees C. Positive linear correlations were found in nine trials, but the two suits differed in their rate of increase in pressure. Three trials using humans were conducted showing increased pressure with temperature but at a lesser rate than with dummies. A correlation of 0.5 to 1.0 mm Hg increase in MAST suit pressure for each 1.0 degrees C increase in ambient temperature was found. Implications are discussed for the use of the MAST suit in environmental conditions where the temperature changes.

Study of the suit inflation effect on crew safety during landing using a full-pressure IVA suit for new-generation reentry space vehicles

Science.gov (United States)

Wataru, Suzuki

Recently, manned space capsules have been recognized as beneficial and reasonable human space vehicles again. The Dragon capsule already achieved several significant successes. The Orion capsule is going to be sent to a high-apogee orbit without crews for experimental purposes in September 2014. For such human-rated space capsules, the study of acceleration impacts against the human body during splashdown is essential to ensure the safety of crews. Moreover, it is also known that wearing a full pressure rescue suit significantly increases safety of a crew, compared to wearing a partial pressure suit. This is mainly because it enables the use of a personal life support system independently in addition to that which installed in the space vehicle. However, it is unclear how the inflation of the full pressure suit due to pressurization affects the crew safety during splashdown, especially in the case of the new generation manned space vehicles. Therefore, the purpose of this work is to investigate the effect of the suit inflation on crew safety against acceleration impact during splashdown. For this objective, the displacements of the safety harness in relation with the suit, a human surrogate, and the crew seats during pressurizing the suit in order to determine if the safety and survivability of a crew can be improved by wearing a full pressure suit. For these tests, the DL/H-1 full pressure IVA suit, developed by Pablo de Leon and Gary L. Harris, will be used. These tests use image analysis techniques to determine the displacements. It is expected, as a result of these tests, that wearing a full pressure suit will help to mitigate the impacts and will increase the safety and survivability of a crew during landing since it works as a buffer to mitigate impact forces during splashdown. This work also proposes a future plan for sled test experiments using a sled facility such as the one in use by the Civil Aerospace Medical Institute (CAMI) for experimental validation

Test Operations Procedure (TOP) 10-2-022A Chemical Vapor and Aerosol System-Level Testing of Chemical/Biological Protective Suits

Science.gov (United States)

2013-12-16

data, QA/quality control (QC) plans]. 3.1.2 Familiarization. a. Potential problem areas will be identified by reviewing previous records and results...also wear specified footwear , gloves, protective mask, and hood. e. Test operators will assist the TPs in obtaining correct closure of the suit at...Vernon Hills, Illinois); and Pureline II® (Dixon Industries , Charlotte, North Carolina). (4) The pressure inside each RTM while drawing air must not

Towards Measuring the Abstractness of State Machines based on Mutation Testing

Directory of Open Access Journals (Sweden)

Thomas Baar

2017-01-01

Full Text Available Abstract. The notation of state machines is widely adopted as a formalism to describe the behaviour of systems. Usually, multiple state machine models can be developed for the very same software system. Some of these models might turn out to be equivalent, but, in many cases, different state machines describing the same system also differ in their level of abstraction. In this paper, we present an approach to actually measure the abstractness level of state machines w.r.t. a given implemented software system. A state machine is considered to be less abstract when it is conceptionally closer to the implemented system. In our approach, this distance between state machine and implementation is measured by applying coverage criteria known from software mutation testing. Abstractness of state machines can be considered as a new metric. As for other metrics as well, a known value for the abstractness of a given state machine allows to assess its quality in terms of a simple number. In model-based software development projects, the abstract metric can help to prevent model degradation since it can actually measure the semantic distance from the behavioural specification of a system in form of a state machine to the current implementation of the system. In contrast to other metrics for state machines, the abstractness cannot be statically computed based on the state machine’s structure, but requires to execute both state machine and corresponding system implementation. The article is published in the author’s wording. 

From Abstract Art to Abstracted Artists

Directory of Open Access Journals (Sweden)

Romi Mikulinsky

2016-11-01

Full Text Available What lineage connects early abstract films and machine-generated YouTube videos? Hans Richter’s famous piece Rhythmus 21 is considered to be the first abstract film in the experimental tradition. The Webdriver Torso YouTube channel is composed of hundreds of thousands of machine-generated test patterns designed to check frequency signals on YouTube. This article discusses geometric abstraction vis-à-vis new vision, conceptual art and algorithmic art. It argues that the Webdriver Torso is an artistic marvel indicative of a form we call mathematical abstraction, which is art performed by computers and, quite possibly, for computers.

Evaluating Suit Fit Using Performance Degradation

Science.gov (United States)

Margerum, Sarah E.; Cowley, Matthew; Harvill, Lauren; Benson, Elizabeth; Rajulu, Sudhakar

2011-01-01

The Mark III suit has multiple sizes of suit components (arm, leg, and gloves) as well as sizing inserts to tailor the fit of the suit to an individual. This study sought to determine a way to identify the point an ideal suit fit transforms into a bad fit and how to quantify this breakdown using mobility-based physical performance data. This study examined the changes in human physical performance via degradation of the elbow and wrist range of motion of the planetary suit prototype (Mark III) with respect to changes in sizing and as well as how to apply that knowledge to suit sizing options and improvements in suit fit. The methods implemented in this study focused on changes in elbow and wrist mobility due to incremental suit sizing modifications. This incremental sizing was within a range that included both optimum and poor fit. Suited range of motion data was collected using a motion analysis system for nine isolated and functional tasks encompassing the elbow and wrist joints. A total of four subjects were tested with motions involving both arms simultaneously as well as the right arm only. The results were then compared across sizing configurations. The results of this study indicate that range of motion may be used as a viable parameter to quantify at what stage suit sizing causes a detriment in performance; however the human performance decrement appeared to be based on the interaction of multiple joints along a limb, not a single joint angle. The study was able to identify a preliminary method to quantify the impact of size on performance and to develop a means to gauge tolerances around optimal size. More work is needed to improve the assessment of optimal fit and to compensate for multiple joint interactions.

Advanced Sensor Platform to Evaluate Manloads For Exploration Suit Architectures

Science.gov (United States)

McFarland, Shane; Pierce, Gregory

2016-01-01

Space suit manloads are defined as the outer bounds of force that the human occupant of a suit is able to exert onto the suit during motion. They are defined on a suit-component basis as a unit of maximum force that the suit component in question must withstand without failure. Existing legacy manloads requirements are specific to the suit architecture of the EMU and were developed in an iterative fashion; however, future exploration needs dictate a new suit architecture with bearings, load paths, and entry capability not previously used in any flight suit. No capability currently exists to easily evaluate manloads imparted by a suited occupant, which would be required to develop requirements for a flight-rated design. However, sensor technology has now progressed to the point where an easily-deployable, repeatable and flexible manloads measuring technique could be developed leveraging recent advances in sensor technology. INNOVATION: This development positively impacts schedule, cost and safety risk associated with new suit exploration architectures. For a final flight design, a comprehensive and accurate man loads requirements set must be communicated to the contractor; failing that, a suit design which does not meet necessary manloads limits is prone to failure during testing or worse, during an EVA, which could cause catastrophic failure of the pressure garment posing risk to the crew. This work facilitates a viable means of developing manloads requirements using a range of human sizes & strengths. OUTCOME / RESULTS: Performed sensor market research. Highlighted three viable options (primary, secondary, and flexible packaging option). Designed/fabricated custom bracket to evaluate primary option on a single suit axial. Manned suited manload testing completed and general approach verified.

Explanatory item response modelling of an abstract reasoning assessment: A case for modern test design

OpenAIRE

Helland, Fredrik

2016-01-01

Assessment is an integral part of society and education, and for this reason it is important to know what you measure. This thesis is about explanatory item response modelling of an abstract reasoning assessment, with the objective to create a modern test design framework for automatic generation of valid and precalibrated items of abstract reasoning. Modern test design aims to strengthen the connections between the different components of a test, with a stress on strong theory, systematic it...

HPC Benchmark Suite NMx, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Intelligent Automation Inc., (IAI) and University of Central Florida (UCF) propose to develop a comprehensive numerical test suite for benchmarking current and...

Near Earth Asteroid Scout Solar Sail Engineering Development Unit Test Suite

Science.gov (United States)

Lockett, Tiffany Russell; Few, Alexander; Wilson, Richard

2017-01-01

The Near Earth Asteroid (NEA) Scout project is a 6U reconnaissance mission to investigate a near Earth asteroid utilizing an 86m(sub 2) solar sail as the primary propulsion system. This will be the largest solar sail NASA has launched to date. NEA Scout is currently manifested on the maiden voyage of the Space Launch System in 2018. In development of the solar sail subsystem, design challenges were identified and investigated for packaging within a 6U form factor and deployment in cis-lunar space. Analysis was able to capture understanding of thermal, stress, and dynamics of the stowed system as well as mature an integrated sail membrane model for deployed flight dynamics. Full scale system testing on the ground is the optimal way to demonstrate system robustness, repeatability, and overall performance on a compressed flight schedule. To physically test the system, the team developed a flight sized engineering development unit with design features as close to flight as possible. The test suite included ascent vent, random vibration, functional deployments, thermal vacuum, and full sail deployments. All of these tests contributed towards development of the final flight unit. This paper will address several of the design challenges and lessons learned from the NEA Scout solar sail subsystem engineering development unit. Testing on the component level all the way to the integrated subsystem level. From optical properties of the sail material to fold and spooling the single sail, the team has developed a robust deployment system for the solar sail. The team completed several deployments of the sail system in preparation for flight at half scale (4m) and full scale (6.8m): boom only, half scale sail deployment, and full scale sail deployment. This paper will also address expected and received test results from ascent vent, random vibration, and deployment tests.

HPC Benchmark Suite NMx, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — In the phase II effort, Intelligent Automation Inc., (IAI) and University of Central Florida (UCF) propose to develop a comprehensive numerical test suite for...

Z-2 Prototype Space Suit Development

Science.gov (United States)

Ross, Amy; Rhodes, Richard; Graziosi, David; Jones, Bobby; Lee, Ryan; Haque, Bazle Z.; Gillespie, John W., Jr.

2014-01-01

NASA's Z-2 prototype space suit is the highest fidelity pressure garment from both hardware and systems design perspectives since the Space Shuttle Extravehicular Mobility Unit (EMU) was developed in the late 1970's. Upon completion the Z-2 will be tested in the 11 foot human-rated vacuum chamber and the Neutral Buoyancy Laboratory (NBL) at the NASA Johnson Space Center to assess the design and to determine applicability of the configuration to micro-, low- (asteroid), and planetary- (surface) gravity missions. This paper discusses the 'firsts' that the Z-2 represents. For example, the Z-2 sizes to the smallest suit scye bearing plane distance for at least the last 25 years and is being designed with the most intensive use of human models with the suit model.

Feasibility of using microbiology diagnostic tests of moderate or high complexity at the point - of - care in a delivery suite.

Science.gov (United States)

Gray, J W; Milner, P J; Edwards, E H; Daniels, J P; Khan, K S

2012-07-01

Point-of-care testing (POCT) is one of the fastest growing sectors of laboratory diagnostics. Most tests in routine use are haematology or biochemistry tests that are of low complexity. Microbiology POCT has been constrained by a lack of tests that are both accurate and of low complexity. We describe our experience of the practical issues around using more complex POCT for detection of Group B streptococci (GBS) in swabs from labouring women. We evaluated two tests for their feasibility in POCT: an optical immune assay (Biostar OIA Strep B, Inverness Medical, Princetown, NJ) and a PCR (IDI-Strep B, Cepheid, Sunnyvale, CA), which have been categorised as being of moderate and high complexity, respectively. A total of 12 unqualified midwifery assistants (MA) were trained to undertake testing on the delivery suite. A systematic approach to the introduction and management of POC testing was used. Modelling showed that the probability of test results being available within a clinically useful timescale was high. However, in the clinical setting, we found it impossible to maintain reliable availability of trained testers. Implementation of more complex POC testing is technically feasible, but it is expensive, and may be difficult to achieve in a busy delivery suite.

Analytical Tools for Space Suit Design

Science.gov (United States)

Aitchison, Lindsay

2011-01-01

As indicated by the implementation of multiple small project teams within the agency, NASA is adopting a lean approach to hardware development that emphasizes quick product realization and rapid response to shifting program and agency goals. Over the past two decades, space suit design has been evolutionary in approach with emphasis on building prototypes then testing with the largest practical range of subjects possible. The results of these efforts show continuous improvement but make scaled design and performance predictions almost impossible with limited budgets and little time. Thus, in an effort to start changing the way NASA approaches space suit design and analysis, the Advanced Space Suit group has initiated the development of an integrated design and analysis tool. It is a multi-year-if not decadal-development effort that, when fully implemented, is envisioned to generate analysis of any given space suit architecture or, conversely, predictions of ideal space suit architectures given specific mission parameters. The master tool will exchange information to and from a set of five sub-tool groups in order to generate the desired output. The basic functions of each sub-tool group, the initial relationships between the sub-tools, and a comparison to state of the art software and tools are discussed.

Functional Mobility Testing: A Novel Method to Create Suit Design Requirements

Science.gov (United States)

England, Scott A.; Benson, Elizabeth A.; Rajulu, Sudhakar L.

2008-01-01

This study was performed to aide in the creation of design requirements for the next generation of space suits that more accurately describe the level of mobility necessary for a suited crewmember through the use of an innovative methodology utilizing functional mobility. A novel method was utilized involving the collection of kinematic data while 20 subjects (10 male, 10 female) performed pertinent functional tasks that will be required of a suited crewmember during various phases of a lunar mission. These tasks were selected based on relevance and criticality from a larger list of tasks that may be carried out by the crew. Kinematic data was processed through Vicon BodyBuilder software to calculate joint angles for the ankle, knee, hip, torso, shoulder, elbow, and wrist. Maximum functional mobility was consistently lower than maximum isolated mobility. This study suggests that conventional methods for establishing design requirements for human-systems interfaces based on maximal isolated joint capabilities may overestimate the required mobility. Additionally, this method provides a valuable means of evaluating systems created from these requirements by comparing the mobility available in a new spacesuit, or the mobility required to use a new piece of hardware, to this newly established database of functional mobility.

Inherent work suit buoyancy distribution: effects on lifejacket self-righting performance.

Science.gov (United States)

Barwood, Martin J; Long, Geoffrey M; Lunt, Heather; Tipton, Michael J

2014-09-01

Accidental immersion in cold water is an occupational risk. Work suits and life jackets (LJ) should work effectively in combination to keep the airway clear of the water (freeboard) and enable self-righting. We hypothesized that inherent buoyancy, in the suit or LJ, would be beneficial for enabling freeboard, but its distribution may influence LJ self-righting. Six participants consented to complete nine immersions. Suits and LJ tested were: flotation suit (FLOAT; 85 N inherent buoyancy); oilskins 1 (OS-1) and 2 (OS-2), both with no inherent buoyancy; LJs (inherent buoyancy/buoyancy after inflation/total buoyancy), LJ-1 50/150/200 N, LJ-2 0/290/290 N, LJ-3 80/190/270 N. Once dressed, the subject entered an immersion pool where uninflated freeboard, self-righting performance, and inflated freeboard were measured. Data were compared using Friedman's test to the 0.05 alpha level. All suits and LJs enabled uninflated and inflated freeboard, but differences were seen between the suits and LJs. Self-righting was achieved on 43 of 54 occasions, irrespective of suit or LJ. On all occasions that self-righting was not achieved, this occurred in an LJ that included inherent buoyancy (11/54 occasions). Of these 11 failures, 8 occurred (73% of occasions) when the FLOAT suit was being worn. LJs that included inherent buoyancy, that are certified as effective on their own, worked less effectively from the perspective of self-righting in combination with a work suit that also included inherent buoyancy. Equipment that is approved for use in the workplace should be tested in combination to ensure adequate performance in an emergency scenario.

Planetary Suit Hip Bearing Model for Predicting Design vs. Performance

Science.gov (United States)

Cowley, Matthew S.; Margerum, Sarah; Harvil, Lauren; Rajulu, Sudhakar

2011-01-01

Designing a planetary suit is very complex and often requires difficult trade-offs between performance, cost, mass, and system complexity. In order to verifying that new suit designs meet requirements, full prototypes must eventually be built and tested with human subjects. Using computer models early in the design phase of new hardware development can be advantageous, allowing virtual prototyping to take place. Having easily modifiable models of the suit hard sections may reduce the time it takes to make changes to the hardware designs and then to understand their impact on suit and human performance. A virtual design environment gives designers the ability to think outside the box and exhaust design possibilities before building and testing physical prototypes with human subjects. Reductions in prototyping and testing may eventually reduce development costs. This study is an attempt to develop computer models of the hard components of the suit with known physical characteristics, supplemented with human subject performance data. Objectives: The primary objective was to develop an articulating solid model of the Mark III hip bearings to be used for evaluating suit design performance of the hip joint. Methods: Solid models of a planetary prototype (Mark III) suit s hip bearings and brief section were reverse-engineered from the prototype. The performance of the models was then compared by evaluating the mobility performance differences between the nominal hardware configuration and hardware modifications. This was accomplished by gathering data from specific suited tasks. Subjects performed maximum flexion and abduction tasks while in a nominal suit bearing configuration and in three off-nominal configurations. Performance data for the hip were recorded using state-of-the-art motion capture technology. Results: The results demonstrate that solid models of planetary suit hard segments for use as a performance design tool is feasible. From a general trend perspective

ILL2020 Vision - Posters and Abstracts

International Nuclear Information System (INIS)

Baker, M.L.; Bocian, A.; Bousige, C.; Cermak, P.; Cooper, J.F.K.; Cronenberg, G.; Ford, S.; Hennig, M.; Jones, A.O.F.; Knoll, W.; Leung, K.; Mourigal, M.; Sigrist, M.S.; Trapp, M.; Wang, Weiwei; Martinez Pena, J.L.; Ruegg, C.; Bramwell, S.; Klotz, S.; Fragneto, G.; Fouquet, P.; Nesvizhevsky, V.V.; Harrison, A.; Andersen, K.; Lelievre-Berna, E.; Schober, H.; Enderle, M.; Jobic, H.; Wilson, C.C.; Teschner, D.; Bourges, P.; Braden, M.; McMorrow, D.; Snogerup Linse, S.; Podjarny, A.; Richardson, J.; Schurtenberger, P.; Farago, B.; Pfrang, C.; Simpson, G.; Plonka-Spehr, C.; Nuttall, W.J.; Chapon, L.C.; Koza, M.M.; Withers, P.J.; Zabel, H.; Lyonnard, S.; Morineau, D.; Salmon, P.S.; Johnson, M.; Forsyth, T.; Wagner, R.

2011-01-01

The aim of the Millennium Programme is to maintain and develop the ILL's instrument suite as the world reference, as well as to upgrade our support facilities and basic neutron technologies so that they continue to satisfy changing demands from the user community. This document gathers the abstracts of the poster session and the paper abstracts. The posters present the latest achievements in the application of neutrons diffraction for instance to the dynamics of molecules or the study of magnetism. The topics of the papers is more about the need for new equipment than about research topics. The proposals for new or upgraded equipment includes neutron spin-echo spectrometers, multimodal diffractometers, time-of-flight spectrometers, small angle neutron spectrometers, and high magnetic field devices for spectroscopy

Philosophies Applied in the Selection of Space Suit Joint Range of Motion Requirements

Science.gov (United States)

Aitchison, Lindsway; Ross, Amy; Matty, Jennifer

2009-01-01

Space suits are the most important tool for astronauts working in harsh space and planetary environments; suits keep crewmembers alive and allow them to perform exploration, construction, and scientific tasks on a routine basis over a period of several months. The efficiency with which the tasks are performed is largely dictated by the mobility features of the space suit. For previous space suit development programs, the mobility requirements were written as pure functional mobility requirements that did not separate joint ranges of motion from the joint torques. The Constellation Space Suit Element has the goal to make more quantitative mobility requirements that focused on the individual components of mobility to enable future suit designers to build and test systems more effectively. This paper details the test planning and selection process for the Constellation space suit pressure garment range of motion requirements.

A Laser-Based Diagnostic Suite for Hypersonic Test Facilities, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — In this SBIR effort, Los Gatos Research (LGR) proposes to develop a suite of laser-based diagnostics for the study of reactive and non-reactive hypersonic flows....

Space Suit Performance: Methods for Changing the Quality of Quantitative Data

Science.gov (United States)

Cowley, Matthew; Benson, Elizabeth; Rajulu, Sudhakar

2014-01-01

NASA is currently designing a new space suit capable of working in deep space and on Mars. Designing a suit is very difficult and often requires trade-offs between performance, cost, mass, and system complexity. To verify that new suits will enable astronauts to perform to their maximum capacity, prototype suits must be built and tested with human subjects. However, engineers and flight surgeons often have difficulty understanding and applying traditional representations of human data without training. To overcome these challenges, NASA is developing modern simulation and analysis techniques that focus on 3D visualization. Early understanding of actual performance early on in the design cycle is extremely advantageous to increase performance capabilities, reduce the risk of injury, and reduce costs. The primary objective of this project was to test modern simulation and analysis techniques for evaluating the performance of a human operating in extra-vehicular space suits.

The ZPIC educational code suite

Science.gov (United States)

Calado, R.; Pardal, M.; Ninhos, P.; Helm, A.; Mori, W. B.; Decyk, V. K.; Vieira, J.; Silva, L. O.; Fonseca, R. A.

2017-10-01

Particle-in-Cell (PIC) codes are used in almost all areas of plasma physics, such as fusion energy research, plasma accelerators, space physics, ion propulsion, and plasma processing, and many other areas. In this work, we present the ZPIC educational code suite, a new initiative to foster training in plasma physics using computer simulations. Leveraging on our expertise and experience from the development and use of the OSIRIS PIC code, we have developed a suite of 1D/2D fully relativistic electromagnetic PIC codes, as well as 1D electrostatic. These codes are self-contained and require only a standard laptop/desktop computer with a C compiler to be run. The output files are written in a new file format called ZDF that can be easily read using the supplied routines in a number of languages, such as Python, and IDL. The code suite also includes a number of example problems that can be used to illustrate several textbook and advanced plasma mechanisms, including instructions for parameter space exploration. We also invite contributions to this repository of test problems that will be made freely available to the community provided the input files comply with the format defined by the ZPIC team. The code suite is freely available and hosted on GitHub at https://github.com/zambzamb/zpic. Work partially supported by PICKSC.

Towards a suite of test cases and a pycomodo library to assess and improve numerical methods in ocean models

Science.gov (United States)

Garnier, Valérie; Honnorat, Marc; Benshila, Rachid; Boutet, Martial; Cambon, Gildas; Chanut, Jérome; Couvelard, Xavier; Debreu, Laurent; Ducousso, Nicolas; Duhaut, Thomas; Dumas, Franck; Flavoni, Simona; Gouillon, Flavien; Lathuilière, Cyril; Le Boyer, Arnaud; Le Sommer, Julien; Lyard, Florent; Marsaleix, Patrick; Marchesiello, Patrick; Soufflet, Yves

2016-04-01

The COMODO group (http://www.comodo-ocean.fr) gathers developers of global and limited-area ocean models (NEMO, ROMS_AGRIF, S, MARS, HYCOM, S-TUGO) with the aim to address well-identified numerical issues. In order to evaluate existing models, to improve numerical approaches and methods or concept (such as effective resolution) to assess the behavior of numerical model in complex hydrodynamical regimes and to propose guidelines for the development of future ocean models, a benchmark suite that covers both idealized test cases dedicated to targeted properties of numerical schemes and more complex test case allowing the evaluation of the kernel coherence is proposed. The benchmark suite is built to study separately, then together, the main components of an ocean model : the continuity and momentum equations, the advection-diffusion of the tracers, the vertical coordinate design and the time stepping algorithms. The test cases are chosen for their simplicity of implementation (analytic initial conditions), for their capacity to focus on a (few) scheme or part of the kernel, for the availability of analytical solutions or accurate diagnoses and lastly to simulate a key oceanic processus in a controlled environment. Idealized test cases allow to verify properties of numerical schemes advection-diffusion of tracers, - upwelling, - lock exchange, - baroclinic vortex, - adiabatic motion along bathymetry, and to put into light numerical issues that remain undetected in realistic configurations - trajectory of barotropic vortex, - interaction current - topography. When complexity in the simulated dynamics grows up, - internal wave, - unstable baroclinic jet, the sharing of the same experimental designs by different existing models is useful to get a measure of the model sensitivity to numerical choices (Soufflet et al., 2016). Lastly, test cases help in understanding the submesoscale influence on the dynamics (Couvelard et al., 2015). Such a benchmark suite is an interesting

Non-Venting Thermal and Humidity Control for EVA Suits

Science.gov (United States)

Izenson, Mike; Chen, Weibo; Bue, Grant

2011-01-01

Future EVA suits need processes and systems to control internal temperature and humidity without venting water to the environment. This paper describes an absorption-based cooling and dehumidification system as well as laboratory demonstrations of the key processes. There are two main components in the system: an evaporation cooling and dehumidification garment (ECDG) that removes both sensible heat and latent heat from the pressure garment, and an absorber radiator that absorbs moisture and rejects heat to space by thermal radiation. This paper discusses the overall design of both components, and presents recent data demonstrating their operation. We developed a design and fabrication approach to produce prototypical heat/water absorbing elements for the ECDG, and demonstrated by test that these elements could absorb heat and moisture at a high flux. Proof-of-concept tests showed that an ECDG prototype absorbs heat and moisture at a rate of 85 W/ft under conditions that simulate operation in an EVA suit. The heat absorption was primarily due to direct absorption of water vapor. It is possible to construct large, flexible, durable cooling patches that can be incorporated into a cooling garment with this system. The proof-of-concept test data was scaled to calculate area needed for full metabolic loads, thus showing that it is feasible to use this technology in an EVA suit. Full-scale, lightweight absorber/radiator modules have also been built and tested. They can reject heat at a flux of 33 W/ft while maintaining ECDG operation at conditions that will provide a cool and dry environment inside the EVA suit.

An integrative variant analysis suite for whole exome next-generation sequencing data

Directory of Open Access Journals (Sweden)

Challis Danny

2012-01-01

Full Text Available Abstract Background Whole exome capture sequencing allows researchers to cost-effectively sequence the coding regions of the genome. Although the exome capture sequencing methods have become routine and well established, there is currently a lack of tools specialized for variant calling in this type of data. Results Using statistical models trained on validated whole-exome capture sequencing data, the Atlas2 Suite is an integrative variant analysis pipeline optimized for variant discovery on all three of the widely used next generation sequencing platforms (SOLiD, Illumina, and Roche 454. The suite employs logistic regression models in conjunction with user-adjustable cutoffs to accurately separate true SNPs and INDELs from sequencing and mapping errors with high sensitivity (96.7%. Conclusion We have implemented the Atlas2 Suite and applied it to 92 whole exome samples from the 1000 Genomes Project. The Atlas2 Suite is available for download at http://sourceforge.net/projects/atlas2/. In addition to a command line version, the suite has been integrated into the Genboree Workbench, allowing biomedical scientists with minimal informatics expertise to remotely call, view, and further analyze variants through a simple web interface. The existing genomic databases displayed via the Genboree browser also streamline the process from variant discovery to functional genomics analysis, resulting in an off-the-shelf toolkit for the broader community.

A method of evaluating efficiency during space-suited work in a neutral buoyancy environment

Science.gov (United States)

Greenisen, Michael C.; West, Phillip; Newton, Frederick K.; Gilbert, John H.; Squires, William G.

1991-01-01

The purpose was to investigate efficiency as related to the work transmission and the metabolic cost of various extravehicular activity (EVA) tasks during simulated microgravity (whole body water immersion) using three space suits. Two new prototype space station suits, AX-5 and MKIII, are pressurized at 57.2 kPa and were tested concurrently with the operationally used 29.6 kPa shuttle suit. Four male astronauts were asked to perform a fatigue trial on four upper extremity exercises during which metabolic rate and work output were measured and efficiency was calculated in each suit. The activities were selected to simulate actual EVA tasks. The test article was an underwater dynamometry system to which the astronauts were secured by foot restraints. All metabolic data was acquired, calculated, and stored using a computerized indirect calorimetry system connected to the suit ventilation/gas supply control console. During the efficiency testing, steady state metabolic rate could be evaluated as well as work transmitted to the dynamometer. Mechanical efficiency could then be calculated for each astronaut in each suit performing each movement.

Instant Spring Tool Suite

CERN Document Server

Chiang, Geoff

2013-01-01

Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. A tutorial guide that walks you through how to use the features of Spring Tool Suite using well defined sections for the different parts of Spring.Instant Spring Tool Suite is for novice to intermediate Java developers looking to get a head-start in enterprise application development using Spring Tool Suite and the Spring framework. If you are looking for a guide for effective application development using Spring Tool Suite, then this book is for you.

Space suit bioenergetics: framework and analysis of unsuited and suited activity.

Science.gov (United States)

Carr, Christopher E; Newman, Dava J

2007-11-01

Metabolic costs limit the duration and intensity of extravehicular activity (EVA), an essential component of future human missions to the Moon and Mars. Energetics Framework: We present a framework for comparison of energetics data across and between studies. This framework, applied to locomotion, differentiates between muscle efficiency and energy recovery, two concepts often confused in the literature. The human run-walk transition in Earth gravity occurs at the point for which energy recovery is approximately the same for walking and running, suggesting a possible role for recovery in gait transitions. Muscular Energetics: Muscle physiology limits the overall efficiency by which chemical energy is converted through metabolism to useful work. Unsuited Locomotion: Walking and running use different methods of energy storage and release. These differences contribute to the relative changes in the metabolic cost of walking and running as gravity is varied, with the metabolic cost of locomoting at a given velocity changing in proportion to gravity for running and less than in proportion for walking. Space Suits: Major factors affecting the energetic cost of suited movement include suit pressurization, gravity, velocity, surface slope, and space suit configuration. Apollo lunar surface EVA traverse metabolic rates, while unexpectedly low, were higher than other activity categories. The Lunar Roving Vehicle facilitated even lower metabolic rates, thus longer duration EVAs. Muscles and tendons act like springs during running; similarly, longitudinal pressure forces in gas pressure space suits allow spring-like storage and release of energy when suits are self-supporting.

Apparatus for storing protective suits

International Nuclear Information System (INIS)

Englemann, H.J.; Koller, J.; Schrader, H.R.; Schade, G.; Pedrerol, J.

1975-01-01

Arrangements are described for storing one or more protective suits when contaminated on the outside. In order to permit a person wearing a contaminated suit to leave a contaminated area safely, and without contaminating the environment, it has hitherto been the practice for the suit to be passed through a 'lock' and cleansed under decontaminating showers whilst still being worn. This procedure is time wasting and not always completely effective, and it may be necessary to provide a second suit for use whilst the first suit is being decontaminated. Repeated decontamination may also result in undue wear and tear. The arrangements described provide a 'lock' chamber in which a contaminated suit may be stowed away without its interior becoming contaminated, thus allowing repeated use by persons donning and shedding it. (U.K.)

Pharmacy settles suit.

Science.gov (United States)

1998-10-02

A suit was filed by an HIV-positive man against a pharmacy that inadvertently disclosed his HIV status to his ex-wife and children. His ex-wife tried to use the information in a custody battle for their two children. The suit against the pharmacy was settled, but the terms of the settlement remain confidential.

Qudi: a modular python suite for experiment control and data processing

DEFF Research Database (Denmark)

Binder, Jan M.; Stark, Alexander; Tomek, Nikolas

2017-01-01

Qudi is a general, modular, multi-operating system suite written in Python 3 for controlling laboratory experiments. It provides a structured environment by separating functionality into hardware abstraction, experiment logic and user interface layers. The core feature set comprises a graphical...... user interface, live data visualization, distributed execution over networks, rapid prototyping via Jupyter notebooks, configuration management, and data recording. Currently, the included modules are focused on confocal microscopy, quantum optics and quantum information experiments, but an expansion...

Abstract Spatial Reasoning as an Autistic Strength

Science.gov (United States)

Stevenson, Jennifer L.; Gernsbacher, Morton Ann

2013-01-01

Autistic individuals typically excel on spatial tests that measure abstract reasoning, such as the Block Design subtest on intelligence test batteries and the Raven’s Progressive Matrices nonverbal test of intelligence. Such well-replicated findings suggest that abstract spatial processing is a relative and perhaps absolute strength of autistic individuals. However, previous studies have not systematically varied reasoning level – concrete vs. abstract – and test domain – spatial vs. numerical vs. verbal, which the current study did. Autistic participants (N = 72) and non-autistic participants (N = 72) completed a battery of 12 tests that varied by reasoning level (concrete vs. abstract) and domain (spatial vs. numerical vs. verbal). Autistic participants outperformed non-autistic participants on abstract spatial tests. Non-autistic participants did not outperform autistic participants on any of the three domains (spatial, numerical, and verbal) or at either of the two reasoning levels (concrete and abstract), suggesting similarity in abilities between autistic and non-autistic individuals, with abstract spatial reasoning as an autistic strength. PMID:23533615

A test of the symbol interdependency hypothesis with both concrete and abstract stimuli

Science.gov (United States)

Buchanan, Lori

2018-01-01

In Experiment 1, the symbol interdependency hypothesis was tested with both concrete and abstract stimuli. Symbolic (i.e., semantic neighbourhood distance) and embodied (i.e., iconicity) factors were manipulated in two tasks—one that tapped symbolic relations (i.e., semantic relatedness judgment) and another that tapped embodied relations (i.e., iconicity judgment). Results supported the symbol interdependency hypothesis in that the symbolic factor was recruited for the semantic relatedness task and the embodied factor was recruited for the iconicity task. Across tasks, and especially in the iconicity task, abstract stimuli resulted in shorter RTs. This finding was in contrast to the concreteness effect where concrete words result in shorter RTs. Experiment 2 followed up on this finding by replicating the iconicity task from Experiment 1 in an ERP paradigm. Behavioural results continued to show a reverse concreteness effect with shorter RTs for abstract stimuli. However, ERP results paralleled the N400 and anterior N700 concreteness effects found in the literature, with more negative amplitudes for concrete stimuli. PMID:29590121

A test of the symbol interdependency hypothesis with both concrete and abstract stimuli.

Science.gov (United States)

Malhi, Simritpal Kaur; Buchanan, Lori

2018-01-01

In Experiment 1, the symbol interdependency hypothesis was tested with both concrete and abstract stimuli. Symbolic (i.e., semantic neighbourhood distance) and embodied (i.e., iconicity) factors were manipulated in two tasks-one that tapped symbolic relations (i.e., semantic relatedness judgment) and another that tapped embodied relations (i.e., iconicity judgment). Results supported the symbol interdependency hypothesis in that the symbolic factor was recruited for the semantic relatedness task and the embodied factor was recruited for the iconicity task. Across tasks, and especially in the iconicity task, abstract stimuli resulted in shorter RTs. This finding was in contrast to the concreteness effect where concrete words result in shorter RTs. Experiment 2 followed up on this finding by replicating the iconicity task from Experiment 1 in an ERP paradigm. Behavioural results continued to show a reverse concreteness effect with shorter RTs for abstract stimuli. However, ERP results paralleled the N400 and anterior N700 concreteness effects found in the literature, with more negative amplitudes for concrete stimuli.

The Los Alamos suite of relativistic atomic physics codes

International Nuclear Information System (INIS)

Fontes, C J; Zhang, H L; Jr, J Abdallah; Clark, R E H; Kilcrease, D P; Colgan, J; Cunningham, R T; Hakel, P; Magee, N H; Sherrill, M E

2015-01-01

The Los Alamos suite of relativistic atomic physics codes is a robust, mature platform that has been used to model highly charged ions in a variety of ways. The suite includes capabilities for calculating data related to fundamental atomic structure, as well as the processes of photoexcitation, electron-impact excitation and ionization, photoionization and autoionization within a consistent framework. These data can be of a basic nature, such as cross sections and collision strengths, which are useful in making predictions that can be compared with experiments to test fundamental theories of highly charged ions, such as quantum electrodynamics. The suite can also be used to generate detailed models of energy levels and rate coefficients, and to apply them in the collisional-radiative modeling of plasmas over a wide range of conditions. Such modeling is useful, for example, in the interpretation of spectra generated by a variety of plasmas. In this work, we provide a brief overview of the capabilities within the Los Alamos relativistic suite along with some examples of its application to the modeling of highly charged ions. (paper)

Abstract algebra

CERN Document Server

Garrett, Paul B

2007-01-01

Designed for an advanced undergraduate- or graduate-level course, Abstract Algebra provides an example-oriented, less heavily symbolic approach to abstract algebra. The text emphasizes specifics such as basic number theory, polynomials, finite fields, as well as linear and multilinear algebra. This classroom-tested, how-to manual takes a more narrative approach than the stiff formalism of many other textbooks, presenting coherent storylines to convey crucial ideas in a student-friendly, accessible manner. An unusual feature of the text is the systematic characterization of objects by universal

[The antigravity suit, chamberless type, as a means of increasing orthostatic tolerance after water immersion hypokinesis and acceleration].

Science.gov (United States)

Shul'zhenko, E B; Kozlova, V G; Kurdin, K A; Iarov, A S; Plokhova, V G

1983-01-01

Orthostatic tolerance after 7-day dry immersion and head-to-feet acceleration was investigated on test subjects with and without an antigravity suit of bladderless type. With the suit on, the 20 min tilt test at 70 degrees prior to immersion induced less marked changes than without the suit. When the suit was on, cardiovascular reactions to tilt tests after immersion and acceleration improved. The maximum heart rate decreased from 135 +/- 4 to 101 +/- 5 beats/min (p less than 0.01), minimum stroke volume increased from 29 +/- 2 to 41 +/- 3 ml (p less than 0.05), and pulse pressure grew. Thus, an antigravity suit may help increase initial orthostatic tolerance and maintain it after the combined effect of simulated hypogravity and acceleration.

An improved air-supplied plastic suit for protection against tritium

International Nuclear Information System (INIS)

Wiernicki, C.

1987-01-01

A newly developed Saran/CPE plastic suit material is described which offers significantly better protection against HTO penetration and permeation than the 12-mil PVC currently used at SRP and most other DOE and commercial sites where tritium and HTO are exposure hazards. Tritium breakthrough time is an important parameter when evaluating the applicability of protective clothing; previously published tritium permeation tests did not measure this parameter. Future studies should quantify steady-state permeation rate and breakthrough time to more fully evaluate potential tritium protective clothing. Saran/CPE has successfully been fabricated into a plastic suit because, in addition to its superior tritium resistance, it has all the characteristics required to construct a rugged, dependable, and comfortable suit. The use of the Saran/CPE suit at SRP reactor and tritium production facilities should be a major contribution to the site As Low As Reasonably Achievable program. Both Saran/CPE have demonstrated excellent resistance to a wide range of chemical contaminants; therefore, this suit material may have applications in the general chemical industry and hazardous waste site cleanup operations. 4 refs., 3 figs., 1 tab

Hollow Fiber Space Suit Water Membrane Evaporator Development for Lunar Missions

Science.gov (United States)

Bue, Grant C.; Trevino, Luis A.; Hanford, Anthony J.; Mitchell, Keith

2009-01-01

The Space Suit Water Membrane Evaporator (SWME) is the baseline heat rejection technology selected for development for the Constellation lunar suit. The Hollow Fiber (HoFi) SWME is being considered for service in the Constellation Space Suit Element (CSSE) Portable Life Support Subsystem (PLSS) to provide cooling to the thermal loop through water evaporation to the vacuum of space. Previous work described the test methodology and planning to compare the test performance of three commercially available hollow fiber materials as alternatives to the sheet membrane prototype for SWME: 1) porous hydrophobic polypropylene, 2) porous hydrophobic polysulfone, and 3) ion exchange through nonporous hydrophilic modified Nafion. Contamination tests were performed to probe for sensitivities of the candidate SWME elements to organics and non-volative inorganics expected to be found in the target feedwater source, i.e., potable water provided by the vehicle. The resulting presence of precipitate in the coolant water could plug pores and tube channels and affect the SWME performance. From this prior work, a commercial porous hydrophobic hollow fiber was selected to satisfy both the sensitivity question and the need to provide 800 W of heat rejection. This paper describes the trade studies, the design methodology, and the hollow fiber test data used to design a full

Potential of a suite of robot/computer-assisted motivating systems for personalized, home-based, stroke rehabilitation

Directory of Open Access Journals (Sweden)

Feng Xin

2007-03-01

Full Text Available Abstract Background There is a need to improve semi-autonomous stroke therapy in home environments often characterized by low supervision of clinical experts and low extrinsic motivation. Our distributed device approach to this problem consists of an integrated suite of low-cost robotic/computer-assistive technologies driven by a novel universal access software framework called UniTherapy. Our design strategy for personalizing the therapy, providing extrinsic motivation and outcome assessment is presented and evaluated. Methods Three studies were conducted to evaluate the potential of the suite. A conventional force-reflecting joystick, a modified joystick therapy platform (TheraJoy, and a steering wheel platform (TheraDrive were tested separately with the UniTherapy software. Stroke subjects with hemiparesis and able-bodied subjects completed tracking activities with the devices in different positions. We quantify motor performance across subject groups and across device platforms and muscle activation across devices at two positions in the arm workspace. Results Trends in the assessment metrics were consistent across devices with able-bodied and high functioning strokes subjects being significantly more accurate and quicker in their motor performance than low functioning subjects. Muscle activation patterns were different for shoulder and elbow across different devices and locations. Conclusion The Robot/CAMR suite has potential for stroke rehabilitation. By manipulating hardware and software variables, we can create personalized therapy environments that engage patients, address their therapy need, and track their progress. A larger longitudinal study is still needed to evaluate these systems in under-supervised environments such as the home.

Qudi: A modular python suite for experiment control and data processing

Directory of Open Access Journals (Sweden)

Jan M. Binder

2017-01-01

Full Text Available Qudi is a general, modular, multi-operating system suite written in Python 3 for controlling laboratory experiments. It provides a structured environment by separating functionality into hardware abstraction, experiment logic and user interface layers. The core feature set comprises a graphical user interface, live data visualization, distributed execution over networks, rapid prototyping via Jupyter notebooks, configuration management, and data recording. Currently, the included modules are focused on confocal microscopy, quantum optics and quantum information experiments, but an expansion into other fields is possible and encouraged.

Immersion Suit Flotation Testing REACT Report

Science.gov (United States)

2016-08-01

mannequin in a swimming pool, the test team disassembled and moved all the gear and equipment to the Joint Maritime Test Facility (JMTF) in Mobile, AL for... cooperative effort, ANT leadership considered this an opportunity to conduct crewmember swim qualifications, and offered to have the swimmers assist in...operations. The swimmers first safely and successfully completed their swim qualification tests , and waited until a Stokes litter was lowered into the water

Development of Power Assisting Suit

Science.gov (United States)

Yamamoto, Keijiro; Ishii, Mineo; Hyodo, Kazuhito; Yoshimitsu, Toshihiro; Matsuo, Takashi

In order to realize a wearable power assisting suit for assisting a nurse to carry a patient in her arms, the power supply and control systems of the suit have to be miniaturized, and it has to be wireless and pipeline-less. The new wearable suit consists of shoulders, arms, back, waist and legs units to be fitted on the nurse's body. The arms, waist and legs have new pneumatic rotary actuators driven directly by micro air pumps supplied by portable Ni-Cd batteries. The muscle forces are sensed by a new muscle hardness sensor utilizing a sensing tip mounted on a force sensing film device. An embedded microcomputer is used for the calculations of control signals. The new wearable suit was applied practically to a human body and a series of movement experiments that weights in the arms were held and taken up and down was performed. Each unit of the suit could transmit assisting torque directly to each joint verifying its practicability.

Effect of STS space suit on astronaut dominant upper limb EVA work performance

Science.gov (United States)

Greenisen, Michael C.

1987-01-01

The STS Space Suited and unsuited dominant upper limb performance was evaluated in order to quantify future EVA astronaut skeletal muscle upper limb performance expectations. Testing was performed with subjects standing in EVA STS foot restraints. Data was collected with a CYBEX Dynamometer enclosed in a waterproof container. Control data was taken in one g. During one g testing, weight of the Space Suit was relieved from the subject via an overhead crane with a special connection to the PLSS of the suit. Experimental data was acquired during simulated zero g, accomplished by neutral buoyancy in the Weightless Environment Training Facility. Unsuited subjects became neutrally buoyant via SCUBA BC vests. Actual zero g experimental data was collected during parabolic arc flights on board NASA's modified KC-135 aircraft. During all test conditions, subjects performed five EVA work tasks requiring dominant upper limb performance and ten individual joint articulation movements. Dynamometer velocities for each tested movement were 0 deg/sec, 30 or 60 deg/sec and 120 or 180 deg/sec, depending on the test, with three repetitions per test. Performance was measured in foot pounds of torque.

Suited versus unsuited analog astronaut performance using the Aouda.X space suit simulator: the DELTA experiment of MARS2013.

Science.gov (United States)

Soucek, Alexander; Ostkamp, Lutz; Paternesi, Roberta

2015-04-01

Space suit simulators are used for extravehicular activities (EVAs) during Mars analog missions. Flight planning and EVA productivity require accurate time estimates of activities to be performed with such simulators, such as experiment execution or traverse walking. We present a benchmarking methodology for the Aouda.X space suit simulator of the Austrian Space Forum. By measuring and comparing the times needed to perform a set of 10 test activities with and without Aouda.X, an average time delay was derived in the form of a multiplicative factor. This statistical value (a second-over-second time ratio) is 1.30 and shows that operations in Aouda.X take on average a third longer than the same operations without the suit. We also show that activities predominantly requiring fine motor skills are associated with larger time delays (between 1.17 and 1.59) than those requiring short-distance locomotion or short-term muscle strain (between 1.10 and 1.16). The results of the DELTA experiment performed during the MARS2013 field mission increase analog mission planning reliability and thus EVA efficiency and productivity when using Aouda.X.

Manikin Testing on LASA Suit

National Research Council Canada - National Science Library

Durnford, W; Potter, P

2006-01-01

As part of a BL2 with the Directorate of Aerospace Engineering Support DAES, DRDC Toronto required testing to be conducted on a thermal immersion manikin to evaluate the thermal resistance of the NBC...

Modular Algorithm Testbed Suite (MATS): A Software Framework for Automatic Target Recognition

Science.gov (United States)

2017-01-01

NAVAL SURFACE WARFARE CENTER PANAMA CITY DIVISION PANAMA CITY, FL 32407-7001 TECHNICAL REPORT NSWC PCD TR-2017-004 MODULAR ...31-01-2017 Technical Modular Algorithm Testbed Suite (MATS): A Software Framework for Automatic Target Recognition DR...flexible platform to facilitate the development and testing of ATR algorithms. To that end, NSWC PCD has created the Modular Algorithm Testbed Suite

Mission Specialist Scott Parazynski checks his flight suit

Science.gov (United States)

1998-01-01

STS-95 Mission Specialist Scott E. Parazynski gets help with his flight suit in the Operations and Checkout Building from a suit technician George Brittingham. The final fitting takes place prior to the crew walkout and transport to Launch Pad 39B. Targeted for launch at 2 p.m. EST on Oct. 29, the mission is expected to last 8 days, 21 hours and 49 minutes, and return to KSC at 11:49 a.m. EST on Nov. 7. The STS-95 mission includes research payloads such as the Spartan solar-observing deployable spacecraft, the Hubble Space Telescope Orbital Systems Test Platform, the International Extreme Ultraviolet Hitchhiker, as well as the SPACEHAB single module with experiments on space flight and the aging process.

Occupational-Specific Strength Predicts Astronaut-Related Task Performance in a Weighted Suit.

Science.gov (United States)

Taylor, Andrew; Kotarsky, Christopher J; Bond, Colin W; Hackney, Kyle J

2018-01-01

Future space missions beyond low Earth orbit will require deconditioned astronauts to perform occupationally relevant tasks within a planetary spacesuit. The prediction of time-to-completion (TTC) of astronaut tasks will be critical for crew safety, autonomous operations, and mission success. This exploratory study determined if the addition of task-specific strength testing to current standard lower body testing would enhance the prediction of TTC in a 1-G test battery. Eight healthy participants completed NASA lower body strength tests, occupationally specific strength tests, and performed six task simulations (hand drilling, construction wrenching, incline walking, collecting weighted samples, and dragging an unresponsive crewmember to safety) in a 48-kg weighted suit. The TTC for each task was recorded and summed to obtain a total TTC for the test battery. Linear regression was used to predict total TTC with two models: 1) NASA lower body strength tests; and 2) NASA lower body strength tests + occupationally specific strength tests. Total TTC of the test battery ranged from 20.2-44.5 min. The lower body strength test alone accounted for 61% of the variability in total TTC. The addition of hand drilling and wrenching strength tests accounted for 99% of the variability in total TTC. Adding occupationally specific strength tests (hand drilling and wrenching) to standard lower body strength tests successfully predicted total TTC in a performance test battery within a weighted suit. Future research should couple these strength tests with higher fidelity task simulations to determine the utility and efficacy of task performance prediction.Taylor A, Kotarsky CJ, Bond CW, Hackney KJ. Occupational-specific strength predicts astronaut-related task performance in a weighted suit. Aerosp Med Hum Perform. 2018; 89(1):58-62.

Human skin in vitro permeation of bentazon and isoproturon formulations with or without protective clothing suit.

Science.gov (United States)

Berthet, Aurélie; Hopf, Nancy B; Miles, Alexandra; Spring, Philipp; Charrière, Nicole; Garrigou, Alain; Baldi, Isabelle; Vernez, David

2014-01-01

Skin exposures to chemicals may lead, through percutaneous permeation, to a significant increase in systemic circulation. Skin is the primary route of entry during some occupational activities, especially in agriculture. To reduce skin exposures, the use of personal protective equipment (PPE) is recommended. PPE efficiency is characterized as the time until products permeate through material (lag time, Tlag). Both skin and PPE permeations are assessed using similar in vitro methods; the diffusion cell system. Flow-through diffusion cells were used in this study to assess the permeation of two herbicides, bentazon and isoproturon, as well as four related commercial formulations (Basagran(®), Basamais(®), Arelon(®) and Matara(®)). Permeation was measured through fresh excised human skin, protective clothing suits (suits) (Microchem(®) 3000, AgriSafe Pro(®), Proshield(®) and Microgard(®) 2000 Plus Green), and a combination of skin and suits. Both herbicides, tested by itself or as an active ingredient in formulations, permeated readily through human skin and tested suits (Tlag < 2 h). High permeation coefficients were obtained regardless of formulations or tested membranes, except for Microchem(®) 3000. Short Tlag, were observed even when skin was covered with suits, except for Microchem(®) 3000. Kp values tended to decrease when suits covered the skin (except when Arelon(®) was applied to skin covered with AgriSafe Pro and Microgard(®) 2000), suggesting that Tlag alone is insufficient in characterizing suits. To better estimate human skin permeations, in vitro experiments should not only use human skin but also consider the intended use of the suit, i.e., the active ingredient concentrations and type of formulations, which significantly affect skin permeation.

Adobe Creative Suite 4 Bible

CERN Document Server

Padova, Ted

2009-01-01

As one of the few books to cover integration and workflow issues between Photoshop, Illustrator, InDesign, GoLive, Acrobat, and Version Cue, this comprehensive reference is the one book that Creative Suite users need; Two well-known and respected authors cover topics such as developing consistent color-managed workflows, moving files among the Creative Suite applications, preparing files for print or the Web, repurposing documents, and using the Creative Suite with Microsoft Office documents; More than 1,200 pages are packed with valuable advice and techniques for tackling common everyday issu

Study on human-factors-engineering properties of reactor maintenance workers with protection suits, (2). Basic research on various biological characteristics in reactor maintenance simulation tests

Energy Technology Data Exchange (ETDEWEB)

Yoshino, K; Ishii, K; Nakasa, H [Central Research Inst. of Electric Power Industry, Tokyo (Japan); Shigeta, S

1980-11-01

To ensure the safety of reactor maintenance workers and to reduce the radiation exposure through the enhancement of labor efficiency, it is needed to evaluate quantitatively work-stress levels of workers with radiation-protection suits. This paper presents the results of reactor-maintenance simulation tests in which the relationship between the work stress and biological characteristics is investigated for 5 pinds of model works done by testees without protection suits in an artificial climate chamber. Major results obtained are: (1) the selected model works are mostly evaluated to be relatively heavy through the measurement of RMR (Relative Metabolic Rate). (2) biological characteristics such as heart rate and respiratory volume under the model works have close relationship to RMR which is the cumulative quantity in relatively long time, and then they may become the real-time indicator for the work stress level. (3) such biological characteristics are greatly affected by the high-temperature work-environment which is often seen in workers with protection suits.

Content Abstract Classification Using Naive Bayes

Science.gov (United States)

Latif, Syukriyanto; Suwardoyo, Untung; Aldrin Wihelmus Sanadi, Edwin

2018-03-01

This study aims to classify abstract content based on the use of the highest number of words in an abstract content of the English language journals. This research uses a system of text mining technology that extracts text data to search information from a set of documents. Abstract content of 120 data downloaded at www.computer.org. Data grouping consists of three categories: DM (Data Mining), ITS (Intelligent Transport System) and MM (Multimedia). Systems built using naive bayes algorithms to classify abstract journals and feature selection processes using term weighting to give weight to each word. Dimensional reduction techniques to reduce the dimensions of word counts rarely appear in each document based on dimensional reduction test parameters of 10% -90% of 5.344 words. The performance of the classification system is tested by using the Confusion Matrix based on comparative test data and test data. The results showed that the best classification results were obtained during the 75% training data test and 25% test data from the total data. Accuracy rates for categories of DM, ITS and MM were 100%, 100%, 86%. respectively with dimension reduction parameters of 30% and the value of learning rate between 0.1-0.5.

Development of the DL/H-1 full pressure suit for private spaceflight

Science.gov (United States)

León, Pablo de; Harris, Gary L.

2010-06-01

The objective of this paper is to detail the need for full pressure suits to protect spaceflight participants during the experimental phases of flight testing of new space vehicles. It also details the objectives, historical background, basis for design, problems encountered by the designers and final development of the DL/H-1 full pressure suit. It will include justification for its use and results of the initial tests in the high altitude chamber and spacecraft simulator at the J.D. Odegard School of Aerospace Sciences at the University of North Dakota. For the test flights of early commercial space vehicles and tourist suborbital spacecrafts, emergency protection from the rarified air of the upper atmosphere and the vacuum of low Earth orbit almost certainly will be a requirement. Suborbital vehicles could be operating in "space equivalent conditions" for as long as 30 min to as much as several hours. In the case of cabin pressure loss, without personal protection, catastrophic loss of crew and vehicle could result. This paper explains the different steps taken by the authors who designed and built a preflight hardware pressure suit that can meet the physiological and comfort requirements of the tourist suborbital industry and the early commercial private spaceflight community. The suborbital tourist and commercial spaceflight industry have unique problems confronting the pressure suit builder such as unpressurized comfort, reasonable expense, unique sizing of the general population, decompression complications of persons not fitting a past military physiology profile and equipment weight issues. In addition, the lack of a certifying agency or guidance from international or national aviation authorities has created the opportunity for the emerging civilian pressure suit industry to create a new safety standard by which it can regulate itself in the same way the recreational SCUBA diving industry has since the late 1950s.

Improved airline-type supplied-air plastic suit

International Nuclear Information System (INIS)

Jolley, L. Jr.; Zippler, D.B.; Cofer, C.H.; Harper, J.A.

1978-06-01

Two piece supplied-air plastic suits are used extensively at the Savannah River Plant for personnel protection against inhalation of airborne plutonium and tritium. Worker comfort and noise level problems gave impetus to development of an improved suit and aid distribution system. The resulting plastic suit and development work are discussed. The plastic suit unit cost is less than $20, the hearing zone noise level is less than 75 dBA, protection factors exceed 10,000, and user comfort is approved. This suit is expected to meet performance requirements for unrestricted use

NIH bows to part of Rifkin suit.

Science.gov (United States)

Sun, M

1984-11-30

Having lost a round in its legal battle with Jeremy Rifkin over field tests of genetically engineered bacteria, the National Institutes of Health will conduct the simpler of two ecological analyses required by the National Environmental Policy Act on three proposed experiments. In May 1984 a federal district court ruling halted a University of California field test pending a decision on Rifkin's 1983 suit, which alleged that NIH had violated the Act by approving experiments without studying the ecological consequences. Still to be decided by the U.S. Court of Appeals is whether NIH must also issue full-scale environmental impact statements.

OpenMP 4.5 Validation and Verification Suite

Energy Technology Data Exchange (ETDEWEB)

2017-12-15

OpenMP, a directive-based programming API, introduce directives for accelerator devices that programmers are starting to use more frequently in production codes. To make sure OpenMP directives work correctly across architectures, it is critical to have a mechanism that tests for an implementation's conformance to the OpenMP standard. This testing process can uncover ambiguities in the OpenMP specification, which helps compiler developers and users make a better use of the standard. We fill this gap through our validation and verification test suite that focuses on the offload directives available in OpenMP 4.5.

DelPhi: a comprehensive suite for DelPhi software and associated resources

Directory of Open Access Journals (Sweden)

Li Lin

2012-05-01

Full Text Available Abstract Background Accurate modeling of electrostatic potential and corresponding energies becomes increasingly important for understanding properties of biological macromolecules and their complexes. However, this is not an easy task due to the irregular shape of biological entities and the presence of water and mobile ions. Results Here we report a comprehensive suite for the well-known Poisson-Boltzmann solver, DelPhi, enriched with additional features to facilitate DelPhi usage. The suite allows for easy download of both DelPhi executable files and source code along with a makefile for local installations. The users can obtain the DelPhi manual and parameter files required for the corresponding investigation. Non-experienced researchers can download examples containing all necessary data to carry out DelPhi runs on a set of selected examples illustrating various DelPhi features and demonstrating DelPhi’s accuracy against analytical solutions. Conclusions DelPhi suite offers not only the DelPhi executable and sources files, examples and parameter files, but also provides links to third party developed resources either utilizing DelPhi or providing plugins for DelPhi. In addition, the users and developers are offered a forum to share ideas, resolve issues, report bugs and seek help with respect to the DelPhi package. The resource is available free of charge for academic users from URL: http://compbio.clemson.edu/DelPhi.php.

Walking a mile in another's shoes: The impact of wearing an Age Suit.

Science.gov (United States)

Lavallière, Martin; D'Ambrosio, Lisa; Gennis, Angelina; Burstein, Arielle; Godfrey, Kathryn M; Waerstad, Hilde; Puleo, Rozanne M; Lauenroth, Andreas; Coughlin, Joseph F

2017-01-01

The "Age Suit" described in this article was developed to enable future designers, business leaders, and engineers to experience navigating the world as many older adults must. Tools such as this Age Suit offer the opportunity to "walk a mile" in another's shoes to develop empathy that can result in better design of spaces, goods, and services to meet the needs of a rapidly growing older population. This work first examined, through a series of clinical tests, whether younger adults' physical capacities were reduced in a direction consistent with aging by wearing a suit developed by the MIT AgeLab. An experiential learning task was then completed with the suit to understand its impact on completion of an instrumental activity of daily living. Results showed that younger adults wearing the suit experienced changes in task performance consistent with expected changes associated with aging. Participants' self-reports from the experiential learning task indicated that they were able to empathize with older adults regarding some issues they face while completing a grocery shopping task. Future research with the suit should involve a wider range of individuals from the population and examine what effect participants' levels of fitness have on the experience of wearing the suit.

The CMSSW benchmarking suite: Using HEP code to measure CPU performance

International Nuclear Information System (INIS)

Benelli, G

2010-01-01

The demanding computing needs of the CMS experiment require thoughtful planning and management of its computing infrastructure. A key factor in this process is the use of realistic benchmarks when assessing the computing power of the different architectures available. In recent years a discrepancy has been observed between the CPU performance estimates given by the reference benchmark for HEP computing (SPECint) and actual performances of HEP code. Making use of the CPU performance tools from the CMSSW performance suite, comparative CPU performance studies have been carried out on several architectures. A benchmarking suite has been developed and integrated in the CMSSW framework, to allow computing centers and interested third parties to benchmark architectures directly with CMSSW. The CMSSW benchmarking suite can be used out of the box, to test and compare several machines in terms of CPU performance and report with the wanted level of detail the different benchmarking scores (e.g. by processing step) and results. In this talk we describe briefly the CMSSW software performance suite, and in detail the CMSSW benchmarking suite client/server design, the performance data analysis and the available CMSSW benchmark scores. The experience in the use of HEP code for benchmarking will be discussed and CMSSW benchmark results presented.

Effect of antigravity suit inflation on cardiovascular, PRA, and PVP responses in humans. [Plasma Renin Activity and Plasma VasoPressin

Science.gov (United States)

Kravik, S. E.; Keil, L. C.; Geelen, G.; Wade, C. E.; Barnes, P. R.

1986-01-01

The effects of lower body and abdominal pressure, produced by antigravity suit inflation, on blood pressure, pulse rate, fluid and electrolyte shift, plasma vasopressin and plasma renin activity in humans in upright postures were studied. Five men and two women stood upright for 3 hr with the suit being either inflated or uninflated. In the control tests, the suit was inflated only during the latter part of the trials. Monitoring was carried out with a sphygnomanometer, with sensors for pulse rates, and using a photometer and osmometer to measure blood serum characteristics. The tests confirmed earlier findings that the anti-g suit eliminates increases in plasma renin activity. Also, the headward redistribution of blood obtained in the tests commends the anti-g suit as an alternative to water immersion or bed rest for initial weightlessness studies.

The BRITNeY Suite Animation Tool

DEFF Research Database (Denmark)

Westergaard, Michael; Lassen, Kristian Bisgaard

2006-01-01

This paper describes the BRITNeY suite, a tool which enables users to create visualizations of formal models. BRITNeY suite is integrated with CPN Tools, and we give an example of how to extend a simple stop-and-wait protocol with a visualization in the form of message sequence charts. We also sh...... examples of animations created during industrial projects to give an impression of what is possible with the BRITNeY suite....

Optimizing the physical ergonomics indices for the use of partial pressure suits.

Science.gov (United States)

Ding, Li; Li, Xianxue; Hedge, Alan; Hu, Huimin; Feathers, David; Qin, Zhifeng; Xiao, Huajun; Xue, Lihao; Zhou, Qianxiang

2015-03-01

This study developed an ergonomic evaluation system for the design of high-altitude partial pressure suits (PPSs). A total of twenty-one Chinese males participated in the experiment which tested three types of ergonomics indices (manipulative mission, operational reach and operational strength) were studied using a three-dimensional video-based motion capture system, a target-pointing board, a hand dynamometer, and a step-tread apparatus. In total, 36 ergonomics indices were evaluated and optimized using regression and fitting analysis. Some indices that were found to be linearly related and redundant were removed from the study. An optimal ergonomics index system was established that can be used to conveniently and quickly evaluate the performance of different pressurized/non-pressurized suit designs. The resulting ergonomics index system will provide a theoretical basis and practical guidance for mission planners, suit designers and engineers to design equipment for human use, and to aid in assessing partial pressure suits. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Fabrication and performance analysis of a DEA cuff designed for dry-suit applications

International Nuclear Information System (INIS)

Ahmadi, S; Camacho Mattos, A; Barbazza, A; Soleimani, M; Boscariol, P; Menon, C

2013-01-01

A method for manufacturing a cylindrical dielectric elastomer actuator (DEA) is presented. The cylindrical DEA can be used in fabricating the cuff area of dry-suits where the garment is very tight and wearing the suit is difficult. When electrically actuated, the DEA expands radially and the suit can be worn more comfortably. In order to study the performance of the DEA, a customized testing setup was designed, and silicone-made cuff samples with different material stiffnesses were tested. Analytical and FEM modeling were considered to evaluate the experimental output. The results revealed that although the stiffness of the DEA material has a direct relationship with the radial constrictive pressure caused by mechanically stretching the DEA, it has a minor effect on the actuation pressure. It was also found that stacking multiple layers of the DEA to fabricate a laminated structure enabled the attainment of a desired variation of pressure required for the implementation of an electrically tunable cuff. (paper)

A Software Suite for Testing SpaceWire Devices and Networks

Science.gov (United States)

Mills, Stuart; Parkes, Steve

2015-09-01

SpaceWire is a data-handling network for use on-board spacecraft, which connects together instruments, mass-memory, processors, downlink telemetry, and other on-board sub-systems. SpaceWire is simple to implement and has some specific characteristics that help it support data-handling applications in space: high-speed, low-power, simplicity, relatively low implementation cost, and architectural flexibility making it ideal for many space missions. SpaceWire provides high-speed (2 Mbits/s to 200 Mbits/s), bi-directional, full-duplex data-links, which connect together SpaceWire enabled equipment. Data-handling networks can be built to suit particular applications using point-to-point data-links and routing switches. STAR-Dundee’s STAR-System software stack has been designed to meet the needs of engineers designing and developing SpaceWire networks and devices. This paper describes the aims of the software and how those needs were met.

Enabling interoperability in Geoscience with GI-suite

Science.gov (United States)

Boldrini, Enrico; Papeschi, Fabrizio; Santoro, Mattia; Nativi, Stefano

2015-04-01

GI-suite is a brokering framework targeting interoperability of heterogeneous systems in the Geoscience domain. The framework is composed by different brokers each one focusing on a specific functionality: discovery, access and semantics (i.e. GI-cat, GI-axe, GI-sem). The brokering takes place between a set of heterogeneous publishing services and a set of heterogeneous consumer applications: the brokering target is represented by resources (e.g. coverages, features, or metadata information) required to seamlessly flow from the providers to the consumers. Different international and community standards are now supported by GI-suite, making possible the successful deployment of GI-suite in many international projects and initiatives (such as GEOSS, NSF BCube and several EU funded projects). As for the publisher side more than 40 standards and implementations are supported (e.g. Dublin Core, OAI-PMH, OGC W*S, Geonetwork, THREDDS Data Server, Hyrax Server, etc.). The support for each individual standard is provided by means of specific GI-suite components, called accessors. As for the consumer applications side more than 15 standards and implementations are supported (e.g. ESRI ArcGIS, Openlayers, OGC W*S, OAI-PMH clients, etc.). The support for each individual standard is provided by means of specific profiler components. The GI-suite can be used in different scenarios by different actors: - A data provider having a pre-existent data repository can deploy and configure GI-suite to broker it and making thus available its data resources through different protocols to many different users (e.g. for data discovery and/or data access) - A data consumer can use GI-suite to discover and/or access resources from a variety of publishing services that are already publishing data according to well-known standards. - A community can deploy and configure GI-suite to build a community (or project-specific) broker: GI-suite can broker a set of community related repositories and

Astronaut John Young during final suiting operations for Apollo 10 mission

Science.gov (United States)

1969-01-01

A technician attaches hose from test stand to spacesuit of Astronaut John W. Young, Apollo 10 command module pilot, during final suiting operations for the Apollo 10 lunar orbit mission. Another technician makes adjustment behind Young.

(abstract) Cryogenic Telescope Test Facility

Science.gov (United States)

Luchik, T. S.; Chave, R. G.; Nash, A. E.

1995-01-01

An optical test Dewar is being constructed with the unique capability to test mirrors of diameter less than or equal to 1 m, f less than or equal to 6, at temperatures from 300 to 4.2 K with a ZYGO Mark IV interferometer. The design and performance of this facility will be presented.

ASDA - Advanced Suit Design Analyzer computer program

Science.gov (United States)

Bue, Grant C.; Conger, Bruce C.; Iovine, John V.; Chang, Chi-Min

1992-01-01

An ASDA model developed to evaluate the heat and mass transfer characteristics of advanced pressurized suit design concepts for low pressure or vacuum planetary applications is presented. The model is based on a generalized 3-layer suit that uses the Systems Integrated Numerical Differencing Analyzer '85 in conjunction with a 41-node FORTRAN routine. The latter simulates the transient heat transfer and respiratory processes of a human body in a suited environment. The user options for the suit encompass a liquid cooled garment, a removable jacket, a CO2/H2O permeable layer, and a phase change layer.

Aerogel Use as a Skin Protective Liner In Space Suits and Prosthetic Limbs Project

Science.gov (United States)

Roberson, Luke Bennett

2014-01-01

Existing materials for prosthetic liners tend to be thick and airtight, causing perspiration to accumulate inside the liner and potentially causing infection and injury. The purpose of this project was to examine the suitability of aerogel for prosthetic liner applications for use in space suits and orthopedics. Three tests were performed on several types of aerogel to assess the properties of each material, and our initial findings demonstrated that these materrials would be excellent candidates for liner applications for prosthetics and space suits. The project is currently on hold until additional funding is obtained for application testing at the VH Hospitals in Tampa

Development and Testing of Compression Technologies Using Advanced Materials for Mechanical Counter-Pressure Planetary Exploration Suits

Data.gov (United States)

National Aeronautics and Space Administration — Mechanical counterpressure (MCP) space suits have the potential to greatly improve the mobility of astronauts as they conduct planetary exploration activities. MCP...

Morphing: A Novel Approach to Astronaut Suit Sizing

Science.gov (United States)

Margerum, Sarah; Clowers, Kurt; Rajulu, Sudhakar

2006-01-01

The fitting of a spacesuit to an astronaut is an iterative process consisting of two parts. The first uses anthropometric data to provide an approximation of the suit components that will fit the astronaut. The second part is the subjective fitting, where small adjustments are made based on the astronaut s preference. By providing a better approximation of the correct suit components, the entire fit process time can be reduced significantly. The goals of this project are twofold: (1) To evaluate the effectiveness of the existing sizing algorithm for the Mark III Hybrid suit and (2) to determine what additional components are needed in order to provide adequate sizing for the existing astronaut population. A single subject was scanned using a 3D whole-body scanner (VITUS 3D) in the Mark III suit in eight different poses and four subjects in minimal clothing were also scanned in similar poses. The 3D external body scans of the suit and the subject are overlaid and visually aligned in a customized MATLAB program. The suit components were contracted or expanded linearly along the subjects limbs to match the subjects segmental lengths. Two independent measures were obtained from the morphing program on four subjects and compared with the existing sizing information. Two of the four subjects were in correspondence with the sizing algorithm and morphing results. The morphing outcome for a third subject, incompatible with the suit, suggested that an additional arm element at least 6 inches smaller than the existing smallest suit component would need to be acquired. The morphing result of the fourth subject, deemed incompatible with the suit using the sizing algorithm, indicated a different suit configuration which would be compatible. This configuration matched with the existing suit fit check data.

Asteroid Redirect Crewed Mission Space Suit and EVA System Architecture Trade Study

Science.gov (United States)

Bowie, Jonathan; Buffington, Jesse; Hood, Drew; Kelly, Cody; Naids, Adam; Watson, Richard; Blanco, Raul; Sipila, Stephanie

2014-01-01

The Asteroid Redirect Crewed Mission (ARCM) requires a Launch/Entry/Abort (LEA) suit capability and short duration Extra Vehicular Activity (EVA) capability from the Orion spacecraft. For this mission, the pressure garment selected for both functions is the Modified Advanced Crew Escape Suit (MACES) with EVA enhancements and the life support option that was selected is the Exploration Portable Life Support System (PLSS) currently under development for Advanced Exploration Systems (AES). The proposed architecture meets the ARCM constraints, but much more work is required to determine the details of the suit upgrades, the integration with the PLSS, and the tools and equipment necessary to accomplish the mission. This work has continued over the last year to better define the operations and hardware maturation of these systems. EVA simulations were completed in the Neutral Buoyancy Lab (NBL) and interfacing options were prototyped and analyzed with testing planned for late 2014. This paper discusses the work done over the last year on the MACES enhancements, the use of tools while using the suit, and the integration of the PLSS with the MACES.

Knowledge acquisition for temporal abstraction.

Science.gov (United States)

Stein, A; Musen, M A; Shahar, Y

1996-01-01

Temporal abstraction is the task of detecting relevant patterns in data over time. The knowledge-based temporal-abstraction method uses knowledge about a clinical domain's contexts, external events, and parameters to create meaningful interval-based abstractions from raw time-stamped clinical data. In this paper, we describe the acquisition and maintenance of domain-specific temporal-abstraction knowledge. Using the PROTEGE-II framework, we have designed a graphical tool for acquiring temporal knowledge directly from expert physicians, maintaining the knowledge in a sharable form, and converting the knowledge into a suitable format for use by an appropriate problem-solving method. In initial tests, the tool offered significant gains in our ability to rapidly acquire temporal knowledge and to use that knowledge to perform automated temporal reasoning.

Suited Contingency Ops Food - 2

Science.gov (United States)

Glass, J. W.; Leong, M. L.; Douglas, G. L.

2014-01-01

The contingency scenario for an emergency cabin depressurization event may require crewmembers to subsist in a pressurized suit for up to 144 hours. This scenario requires the capability for safe nutrition delivery through a helmet feed port against a 4 psi pressure differential to enable crewmembers to maintain strength and cognition to perform critical tasks. Two nutritional delivery prototypes were developed and analyzed for compatibility with the helmet feed port interface and for operational effectiveness against the pressure differential. The bag-in-bag (BiB) prototype, designed to equalize the suit pressure with the beverage pouch and enable a crewmember to drink normally, delivered water successfully to three different subjects in suits pressurized to 4 psi. The Boa restrainer pouch, designed to provide mechanical leverage to overcome the pressure differential, did not operate sufficiently. Guidelines were developed and compiled for contingency beverages that provide macro-nutritional requirements, a minimum one-year shelf life, and compatibility with the delivery hardware. Evaluation results and food product parameters have the potential to be used to improve future prototype designs and develop complete nutritional beverages for contingency events. These feeding capabilities would have additional use on extended surface mission EVAs, where the current in-suit drinking device may be insufficient.

Interoperative efficiency in minimally invasive surgery suites.

Science.gov (United States)

van Det, M J; Meijerink, W J H J; Hoff, C; Pierie, J P E N

2009-10-01

Performing minimally invasive surgery (MIS) in a conventional operating room (OR) requires additional specialized equipment otherwise stored outside the OR. Before the procedure, the OR team must collect, prepare, and connect the equipment, then take it away afterward. These extra tasks pose a thread to OR efficiency and may lengthen turnover times. The dedicated MIS suite has permanently installed laparoscopic equipment that is operational on demand. This study presents two experiments that quantify the superior efficiency of the MIS suite in the interoperative period. Preoperative setup and postoperative breakdown times in the conventional OR and the MIS suite in an experimental setting and in daily practice were analyzed. In the experimental setting, randomly chosen OR teams simulated the setup and breakdown for a standard laparoscopic cholecystectomy (LC) and a complex laparoscopic sigmoid resection (LS). In the clinical setting, the interoperative period for 66 LCs randomly assigned to the conventional OR or the MIS suite were analyzed. In the experimental setting, the setup and breakdown times were significantly shorter in the MIS suite. The difference between the two types of OR increased for the complex procedure: 2:41 min for the LC (p < 0.001) and 10:47 min for the LS (p < 0.001). In the clinical setting, the setup and breakdown times as a whole were not reduced in the MIS suite. Laparoscopic setup and breakdown times were significantly shorter in the MIS suite (mean difference, 5:39 min; p < 0.001). Efficiency during the interoperative period is significantly improved in the MIS suite. The OR nurses' tasks are relieved, which may reduce mental and physical workload and improve job satisfaction and patient safety. Due to simultaneous tasks of other disciplines, an overall turnover time reduction could not be achieved.

The Variable Vector Countermeasure Suit (V2Suit for Space Habitation and Exploration

Directory of Open Access Journals (Sweden)

Kevin R Duda

2015-04-01

Full Text Available The Variable Vector Countermeasure Suit (V2Suit for Space Habitation and Exploration is a novel system concept that provides a platform for integrating sensors and actuators with daily astronaut intravehicular activities to improve health and performance, while reducing the mass and volume of the physiologic adaptation countermeasure systems, as well as the required exercise time during long-duration space exploration missions. The V2Suit system leverages wearable kinematic monitoring technology and uses inertial measurement units (IMUs and control moment gyroscopes (CMGs within miniaturized modules placed on body segments to provide a viscous resistance during movements against a specified direction of down – initially as a countermeasure to the sensorimotor adaptation performance decrements that manifest themselves while living and working in microgravity and during gravitational transitions during long-duration spaceflight, including post-flight recovery and rehabilitation. Several aspects of the V2Suit system concept were explored and simulated prior to developing a brassboard prototype for technology demonstration. This included a system architecture for identifying the key components and their interconnects, initial identification of key human-system integration challenges, development of a simulation architecture for CMG selection and parameter sizing, and the detailed mechanical design and fabrication of a module. The brassboard prototype demonstrates closed-loop control from down initialization through CMG actuation, and provides a research platform for human performance evaluations to mitigate sensorimotor adaptation, as well as a tool for determining the performance requirements when used as a musculoskeletal deconditioning countermeasure. This type of countermeasure system also has Earth benefits, particularly in gait or movement stabilization and rehabilitation.

The Aouda.X space suit simulator and its applications to astrobiology.

Science.gov (United States)

Groemer, Gernot E; Hauth, Stefan; Luger, Ulrich; Bickert, Klaus; Sattler, Birgit; Hauth, Eva; Föger, Daniel; Schildhammer, Daniel; Agerer, Christian; Ragonig, Christoph; Sams, Sebastian; Kaineder, Felix; Knoflach, Martin

2012-02-01

We have developed the space suit simulator Aouda.X, which is capable of reproducing the physical and sensory limitations a flight-worthy suit would have on Mars. Based upon a Hard-Upper-Torso design, it has an advanced human-machine interface and a sensory network connected to an On-Board Data Handling system to increase the situational awareness in the field. Although the suit simulator is not pressurized, the physical forces that lead to a reduced working envelope and physical performance are reproduced with a calibrated exoskeleton. This allows us to simulate various pressure regimes from 0.3-1 bar. Aouda.X has been tested in several laboratory and field settings, including sterile sampling at 2800 m altitude inside a glacial ice cave and a cryochamber at -110°C, and subsurface tests in connection with geophysical instrumentation relevant to astrobiology, including ground-penetrating radar, geoacoustics, and drilling. The communication subsystem allows for a direct interaction with remote science teams via telemetry from a mission control center. Aouda.X as such is a versatile experimental platform for studying Mars exploration activities in a high-fidelity Mars analog environment with a focus on astrobiology and operations research that has been optimized to reduce the amount of biological cross contamination. We report on the performance envelope of the Aouda.X system and its operational limitations.

Innovative technology summary report: Sealed-seam sack suits

International Nuclear Information System (INIS)

1998-09-01

Sealed-seam sack suits are an improved/innovative safety and industrial hygiene technology designed to protect workers from dermal exposure to contamination. Most of these disposable, synthetic-fabric suits are more protective than cotton suits, and are also water-resistant and gas permeable. Some fabrics provide a filter to aerosols, which is important to protection against contamination, while allowing air to pass, increasing comfort level of workers. It is easier to detect body-moisture breakthrough with the disposable suits than with cotton, which is also important to protecting workers from contamination. These suits present a safe and cost-effective (6% to 17% less expensive than the baseline) alternative to traditional protective clothing. This report covers the period from October 1996 to August 1997. During that time, sealed-seam sack suits were demonstrated during daily activities under normal working conditions at the C Reactor and under environmentally controlled conditions at the Los Alamos National Laboratory (LANL)

Heart Rhythm Monitoring in the Constellation Lunar and Launch/Landing EVA Suit: Recommendations from an Expert Panel

Science.gov (United States)

Scheuring, Richard A.; Hamilton, Doug; Jones, Jeffrey A.; Alexander, David

2009-01-01

There are currently several physiological monitoring requirements for EVA in the Human-Systems Interface Requirements (HSIR) document. There are questions as to whether the capability to monitor heart rhythm in the lunar surface space suit is a necessary capability for lunar surface operations. Similarly, there are questions as to whether the capability to monitor heart rhythm during a cabin depressurization scenario in the launch/landing space suit is necessary. This presentation seeks to inform space medicine personnel of recommendations made by an expert panel of cardiovascular medicine specialists regarding in-suit ECG heart rhythm monitoring requirements during lunar surface operations. After a review of demographic information and clinical cases and panel discussion, the panel recommended that ECG monitoring capability as a clinical tool was not essential in the lunar space suit; ECG monitoring was not essential in the launch/landing space suit for contingency scenarios; the current hear rate monitoring capability requirement for both launch/landing and lunar space suits should be maintained; lunar vehicles should be required to have ECG monitoring capability with a minimum of 5-lead ECG for IVA medical assessments; and, exercise stress testing for astronaut selection and retention should be changed from the current 85% maximum heart rate limit to maximal, exhaustive 'symptom-limited' testing to maximize diagnostic utility as a screening tool for evaluating the functional capacity of astronauts and their cardiovascular health.

Abstracting audit data for lightweight intrusion detection

KAUST Repository

Wang, Wei; Zhang, Xiangliang; Pitsilis, Georgios

2010-01-01

are used to validate the two strategies of data abstraction. The extensive test results show that the process of exemplar extraction significantly improves the detection efficiency and has a better detection performance than PCA in data abstraction. © 2010

Asteroid Redirect Crewed Mission Space Suit and EVA System Architecture Trade Study

Science.gov (United States)

Blanco, Raul A.; Bowie, Jonathan T.; Watson, Richard D.; Sipila, Stephanie A.

2014-01-01

The Asteroid Redirect Crewed Mission (ARCM) requires a Launch/Entry/Abort (LEA) suit capability and short duration Extra Vehicular Activity (EVA) capability for Orion. The EVAs will involve a two-person crew for approximately four hours. Currently, two EVAs are planned with one contingency EVA in reserve. Providing this EVA capability is very challenging due to system level constraints and a new and unknown environment. The goal of the EVA architecture for ARCM is one that builds upon previously developed technologies and lessons learned, and that accomplishes the ARCM mission while providing a stepping stone to future missions and destinations. The primary system level constraints are to 1) minimize system mass and volume and 2) minimize the interfacing impacts to the baseline Orion design. In order to minimize the interfacing impacts and to not perturb the baseline Orion schedule, the concept of adding "kits" to the baseline system is proposed. These kits consist of: an EVA kit (converts LEA suit to EVA suit), EVA Servicing and Recharge Kit (provides suit consumables), the EVA Tools, Translation Aids & Sample Container Kit (the tools and mobility aids to complete the tasks), the EVA Communications Kit (interface between the EVA radio and the MPCV), and the Cabin Repress Kit (represses the MPCV between EVAs). This paper will focus on the trade space, analysis, and testing regarding the space suit (pressure garment and life support system). Historical approaches and lessons learned from all past EVA operations were researched. Previous and current, successfully operated EVA hardware and high technology readiness level (TRL) hardware were evaluated, and a trade study was conducted for all possible pressure garment and life support options. Testing and analysis was conducted and a recommended EVA system architecture was proposed. Pressure garment options that were considered for this mission include the currently in-use ISS EVA Mobility Unit (EMU), all variations of

[Antigravity suit used for neurosurgical operations in sitting position].

Science.gov (United States)

Szpiro-Zurkowska, A; Milczarek, Z; Marchel, A; Jagielski, J

1996-01-01

The aviator's antigravity suit (G-suit) was used for 40 operations on neurosurgical patients operated on in sitting position. The G-suit was filled with air to 0.2 atmosphere (20 kPa) pressure in 26 cases, and 0.3 atm. (30 kPa) in 14 cases. In all cases G-suit filling was followed by central venous pressure rise and mean arterial pressure rise. Venous air embolism was found in 5 (12.5%) patients. No other complications connected with the use of G-suit were observed.

Automata Learning through Counterexample Guided Abstraction Refinement

DEFF Research Database (Denmark)

Aarts, Fides; Heidarian, Faranak; Kuppens, Harco

2012-01-01

to a small set of abstract events that can be handled by automata learning tools. In this article, we show how such abstractions can be constructed fully automatically for a restricted class of extended finite state machines in which one can test for equality of data parameters, but no operations on data...... are allowed. Our approach uses counterexample-guided abstraction refinement: whenever the current abstraction is too coarse and induces nondeterministic behavior, the abstraction is refined automatically. Using Tomte, a prototype tool implementing our algorithm, we have succeeded to learn – fully......Abstraction is the key when learning behavioral models of realistic systems. Hence, in most practical applications where automata learning is used to construct models of software components, researchers manually define abstractions which, depending on the history, map a large set of concrete events...

Model-Based Security Testing

Directory of Open Access Journals (Sweden)

Ina Schieferdecker

2012-02-01

Full Text Available Security testing aims at validating software system requirements related to security properties like confidentiality, integrity, authentication, authorization, availability, and non-repudiation. Although security testing techniques are available for many years, there has been little approaches that allow for specification of test cases at a higher level of abstraction, for enabling guidance on test identification and specification as well as for automated test generation. Model-based security testing (MBST is a relatively new field and especially dedicated to the systematic and efficient specification and documentation of security test objectives, security test cases and test suites, as well as to their automated or semi-automated generation. In particular, the combination of security modelling and test generation approaches is still a challenge in research and of high interest for industrial applications. MBST includes e.g. security functional testing, model-based fuzzing, risk- and threat-oriented testing, and the usage of security test patterns. This paper provides a survey on MBST techniques and the related models as well as samples of new methods and tools that are under development in the European ITEA2-project DIAMONDS.

STS-95 Mission Specialist Pedro Duque suits up for launch

Science.gov (United States)

1998-01-01

STS-95 Mission Specialist Pedro Duque of Spain, with the European Space Agency, is helped with his flight suit by suit tech Tommy McDonald in the Operations and Checkout Building. The final fitting takes place prior to the crew walkout and transport to Launch Pad 39B. Targeted for launch at 2 p.m. EST on Oct. 29, the mission is expected to last 8 days, 21 hours and 49 minutes, and return to KSC at 11:49 a.m. EST on Nov. 7. The STS-95 mission includes research payloads such as the Spartan solar-observing deployable spacecraft, the Hubble Space Telescope Orbital Systems Test Platform, the International Extreme Ultraviolet Hitchhiker, as well as the SPACEHAB single module with experiments on space flight and the aging process.

Oracle SOA Suite 11g performance cookbook

CERN Document Server

Brasier, Matthew; Wright, Nicholas

2013-01-01

This is a Cookbook with interesting, hands-on recipes, giving detailed descriptions and lots of practical walkthroughs for boosting the performance of your Oracle SOA Suite.This book is for Oracle SOA Suite 11g administrators, developers, and architects who want to understand how they can maximise the performance of their SOA Suite infrastructure. The recipes contain easy to follow step-by-step instructions and include many helpful and practical tips. It is suitable for anyone with basic operating system and application server administration experience.

Safety in the use of pressurized suits

International Nuclear Information System (INIS)

1984-01-01

This Code of Practice describes the procedures relating to the safe operation of Pressurized Suit Areas and their supporting services. It is directed at personnel responsible for the design and/or operation of Pressurized Suit Areas. (author)

Suites of dwarfs around Nearby giant galaxies

International Nuclear Information System (INIS)

Karachentsev, Igor D.; Kaisina, Elena I.; Makarov, Dmitry I.

2014-01-01

The Updated Nearby Galaxy Catalog (UNGC) contains the most comprehensive summary of distances, radial velocities, and luminosities for 800 galaxies located within 11 Mpc from us. The high density of observables in the UNGC makes this sample indispensable for checking results of N-body simulations of cosmic structures on a ∼1 Mpc scale. The environment of each galaxy in the UNGC was characterized by a tidal index Θ 1 , depending on the separation and mass of the galaxy's main disturber (MD). We grouped UNGC galaxies with a common MD in suites, and ranked suite members according to their Θ 1 . All suite members with positive Θ 1 are assumed to be physical companions of the MD. About 58% of the sample are members of physical groups. The distribution of suites by the number of members, n, follows a relation N(n) ∼ n –2 . The 20 most populated suites contain 468 galaxies, i.e., 59% of the UNGC sample. The fraction of MDs among the brightest galaxies is almost 100% and drops to 50% at M B = –18 m . We discuss various properties of MDs, as well as galaxies belonging to their suites. The suite abundance practically does not depend on the morphological type, linear diameter, or hydrogen mass of the MD, the tightest correlation being with the MD dynamical mass. Dwarf galaxies around MDs exhibit well-known segregation effects: the population of the outskirts has later morphological types, richer H I contents, and higher rates of star formation activity. Nevertheless, there are some intriguing cases where dwarf spheroidal galaxies occur at the far periphery of the suites, as well as some late-type dwarfs residing close to MDs. Comparing simulation results with galaxy groups, most studies assume the Local Group is fairly typical. However, we recognize that the nearby groups significantly differ from each other and there is considerable variation in their properties. The suites of companions around the Milky Way and M31, consisting of the Local Group, do not

Sibelius. Karelia Suite, Op. 11 / Robert Layton

Index Scriptorium Estoniae

Layton, Robert

1996-01-01

Uuest heliplaadist "Sibelius. Karelia Suite, Op. 11. Luonnotar, Op. 70 a. Andante festivo. The Oceanides, Op. 73. King Christian II, Op. 27-Suite. Finlandia, Op. 26a. Gothenburg Symphony Orchester, Neeme Järvi" DG 447 760-2GH (72 minutes: DDD)

Open architecture of smart sensor suites

Science.gov (United States)

Müller, Wilmuth; Kuwertz, Achim; Grönwall, Christina; Petersson, Henrik; Dekker, Rob; Reinert, Frank; Ditzel, Maarten

2017-10-01

Experiences from recent conflicts show the strong need for smart sensor suites comprising different multi-spectral imaging sensors as core elements as well as additional non-imaging sensors. Smart sensor suites should be part of a smart sensor network - a network of sensors, databases, evaluation stations and user terminals. Its goal is to optimize the use of various information sources for military operations such as situation assessment, intelligence, surveillance, reconnaissance, target recognition and tracking. Such a smart sensor network will enable commanders to achieve higher levels of situational awareness. Within the study at hand, an open system architecture was developed in order to increase the efficiency of sensor suites. The open system architecture for smart sensor suites, based on a system-of-systems approach, enables combining different sensors in multiple physical configurations, such as distributed sensors, co-located sensors combined in a single package, tower-mounted sensors, sensors integrated in a mobile platform, and trigger sensors. The architecture was derived from a set of system requirements and relevant scenarios. Its mode of operation is adaptable to a series of scenarios with respect to relevant objects of interest, activities to be observed, available transmission bandwidth, etc. The presented open architecture is designed in accordance with the NATO Architecture Framework (NAF). The architecture allows smart sensor suites to be part of a surveillance network, linked e.g. to a sensor planning system and a C4ISR center, and to be used in combination with future RPAS (Remotely Piloted Aircraft Systems) for supporting a more flexible dynamic configuration of RPAS payloads.

An overview of recent projects to study thermal protection in life rafts, lifeboats and immersion suits

Energy Technology Data Exchange (ETDEWEB)

Mak, L.; DuCharme, M. B.; Farnworth, B.; Wissler, E. H.; Brown, R.; Kuczora, A. [Maritime and Arctic Survival Scientific and Engineering Ressearch Team (Canada)

2011-07-01

Survival during a marine evacuation in cold regions is very challenging. However international regulations do not require specific thermal protection or ventilation performance criteria for lifeboats. In the same way, the testing methods for approval testing of immersion suits are not standardised. This paper investigated recent projects completed or on-going to study thermal protection in life rafts, lifeboats and immersion suits. An overview of several projects from the Maritime and Arctic Survival Scientific and Engineering Research Team (MASSERT) was conducted. This review provided the necessary knowledge to advance international standards and develop the thermal protection requirements for survival in the Arctic. The results showed the MASSERT correlated thermal insulation values between human subjects and thermal manikins in life rafts and in immersion suits. It was found that the manikins are a valuable evaluation tool, as well as the computerised models used as prediction tools.

Mechanical Engineering Department technical abstracts

International Nuclear Information System (INIS)

1984-01-01

The Mechanical Engineering Department publishes abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). General information about the current role and activities of each of the Department's seven divisions precedes the technical abstracts. Further information about a division's work may be obtained from the division leader, whose name is given at the end of each divisional summary. The Department's seven divisions are as follows: Nuclear Test Engineering Division, Nuclear Explosives Engineering Division, Weapons Engineering Division, Energy Systems Engineering Division, Engineering Sciences Division, Magnetic Fusion Engineering Division and Materials Fabrication Division

Problem of Office Suite Training at the University

Directory of Open Access Journals (Sweden)

Natalia A. Nastashchuk

2013-01-01

Full Text Available Te paper considers the problem of office suite applications training, caused by a rapid change of their versions, variety of software developers and a rapid development of software and hardware platforms. The content of office suite applications training, based on the system of office suite notions, its basic functional and standards of information technologies development (OpenDocument Format Standard, ISO 26300-200Х is presented.

46 CFR 199.214 - Immersion suits and thermal protective aids.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Immersion suits and thermal protective aids. 199.214... Passenger Vessels § 199.214 Immersion suits and thermal protective aids. (a) Each passenger vessel must... an immersion suit. (c) The immersion suits and thermal protective aids required under paragraphs (a...

PLEASE: The Python Low-energy Electron Analysis SuitE – Enabling Rapid Analysis of LEEM and LEED Data

Directory of Open Access Journals (Sweden)

Maxwell Grady

2018-02-01

Full Text Available PLEASE, the Python Low-energy Electron Analysis SuitE, provides an open source and cross-platform graphical user interface (GUI for rapid analysis and visualization of low energy electron microscopy (LEEM data sets. LEEM and the associated technique, selected area micro-spot low energy electron diffraction (μ-LEED, are powerful tools for analysis of the surface structure for many novel materials. Specifically, these tools are uniquely suited for the characterization of two-dimensional materials. PLEASE offers a user-friendly point-and-click method for extracting intensity-voltage curves from LEEM and LEED data sets. Analysis of these curves provides insight into the atomic structure of the target material surface with unparalleled resolution.

Bibliography with abstracts of geological literature pertaining to southern Nevada with particular reference to the Nevada Test Site

International Nuclear Information System (INIS)

Connolly, J.R.; Hicks, R.T.; Emmanuel, K.M.; Cappon, J.P.; Sinnock, S.

1983-05-01

This bibliography (with abstracts) of geological literature pertains to the Nevada Test Site and its southern Nevada environs. Its purpose is to provide a convenient, general reference document for published geological information potentially useful for radioactive waste studies conducted by the Nevada Nuclear Waste Storage Investigation project at the Nevada Test Site. It is organized so that users of geological information about southern Nevada may find subject matter in their areas or topics of interest. The most current published literature included is dated 1980

Elements of abstract harmonic analysis

CERN Document Server

Bachman, George

2013-01-01

Elements of Abstract Harmonic Analysis provides an introduction to the fundamental concepts and basic theorems of abstract harmonic analysis. In order to give a reasonably complete and self-contained introduction to the subject, most of the proofs have been presented in great detail thereby making the development understandable to a very wide audience. Exercises have been supplied at the end of each chapter. Some of these are meant to extend the theory slightly while others should serve to test the reader's understanding of the material presented. The first chapter and part of the second give

Monitoring Human Performance During Suited Operations: A Technology Feasibility Study Using EMU Gloves

Science.gov (United States)

Bekdash, Omar; Norcross, Jason; McFarland, Shane

2015-01-01

Mobility tracking of human subjects while conducting suited operations still remains focused on the external movement of the suit and little is known about the human movement within it. For this study, accelerometers and bend sensitive resistors were integrated into a custom carrier glove to quantify range of motion and dexterity from within the pressurized glove environment as a first stage feasibility study of sensor hardware, integration, and reporting capabilities. Sensors were also placed on the exterior of the pressurized glove to determine if it was possible to compare a glove joint angle to the anatomical joint angle of the subject during tasks. Quantifying human movement within the suit was feasible, with accelerometers clearly detecting movements in the wrist and reporting expected joint angles at maximum flexion or extension postures with repeatability of plus or minus 5 degrees between trials. Bend sensors placed on the proximal interphalangeal and distal interphalangeal joints performed less well. It was not possible to accurately determine the actual joint angle using these bend sensors, but these sensors could be used to determine when the joint was flexed to its maximum and provide a general range of mobility needed to complete a task. Further work includes additional testing with accelerometers and the possible inclusion of hardware such as magnetometers or gyroscopes to more precisely locate the joint in 3D space. We hope to eventually expand beyond the hand and glove and develop a more comprehensive suit sensor suite to characterize motion across more joints (knee, elbow, shoulder, etc.) and fully monitor the human body operating within the suit environment.

A study of the use of abstract types for the representation of engineering units in integration and test applications

Science.gov (United States)

Johnson, Charles S.

1986-01-01

Physical quantities using various units of measurement can be well represented in Ada by the use of abstract types. Computation involving these quantities (electric potential, mass, volume) can also automatically invoke the computation and checking of some of the implicitly associable attributes of measurements. Quantities can be held internally in SI units, transparently to the user, with automatic conversion. Through dimensional analysis, the type of the derived quantity resulting from a computation is known, thereby allowing dynamic checks of the equations used. The impact of the possible implementation of these techniques in integration and test applications is discussed. The overhead of computing and transporting measurement attributes is weighed against the advantages gained by their use. The construction of a run time interpreter using physical quantities in equations can be aided by the dynamic equation checks provided by dimensional analysis. The effects of high levels of abstraction on the generation and maintenance of software used in integration and test applications are also discussed.

A new device for the inflation of the antigravity suit.

Science.gov (United States)

Brodrick, P M

1986-02-01

The 'Schuco' orthopaedic tourniquet inflator can be simply converted into a suitable device for inflating an antigravity suit (G-suit). The antigravity suit may be used on neurosurgical patients undergoing procedures in the sitting position to help prevent hypotension and air embolism. The availability of this device may encourage the more widespread use of an antigravity suit in neuro-anaesthetic practice.

Development on smart suit for dairy work assistance.

Science.gov (United States)

Nara, Hiroyuki; Kusaka, Takashi; Tanaka, Takayuki; Yamagishi, Takayuki; Ogura, Shotaroh

2013-01-01

Our purpose in this study is to achieve an independent life and a social involvement for the elderly using KEIROKA Technology(fatigue-reduction) which makes it possible to improve the quality of chores and occupations by removing excessive strain and tiredness. The authors have developed power assist suits named "smart suit". The authors have evaluated the effect that the purpose of dairy work assistance, to measure EMG of the worker, compared to the potential of the surface of the non-wearing and wearing "smart suit".

Abstracting audit data for lightweight intrusion detection

KAUST Repository

Wang, Wei

2010-01-01

High speed of processing massive audit data is crucial for an anomaly Intrusion Detection System (IDS) to achieve real-time performance during the detection. Abstracting audit data is a potential solution to improve the efficiency of data processing. In this work, we propose two strategies of data abstraction in order to build a lightweight detection model. The first strategy is exemplar extraction and the second is attribute abstraction. Two clustering algorithms, Affinity Propagation (AP) as well as traditional k-means, are employed to extract the exemplars, and Principal Component Analysis (PCA) is employed to abstract important attributes (a.k.a. features) from the audit data. Real HTTP traffic data collected in our institute as well as KDD 1999 data are used to validate the two strategies of data abstraction. The extensive test results show that the process of exemplar extraction significantly improves the detection efficiency and has a better detection performance than PCA in data abstraction. © 2010 Springer-Verlag.

Engineering Software Suite Validates System Design

Science.gov (United States)

2007-01-01

EDAptive Computing Inc.'s (ECI) EDAstar engineering software tool suite, created to capture and validate system design requirements, was significantly funded by NASA's Ames Research Center through five Small Business Innovation Research (SBIR) contracts. These programs specifically developed Syscape, used to capture executable specifications of multi-disciplinary systems, and VectorGen, used to automatically generate tests to ensure system implementations meet specifications. According to the company, the VectorGen tests considerably reduce the time and effort required to validate implementation of components, thereby ensuring their safe and reliable operation. EDASHIELD, an additional product offering from ECI, can be used to diagnose, predict, and correct errors after a system has been deployed using EDASTAR -created models. Initial commercialization for EDASTAR included application by a large prime contractor in a military setting, and customers include various branches within the U.S. Department of Defense, industry giants like the Lockheed Martin Corporation, Science Applications International Corporation, and Ball Aerospace and Technologies Corporation, as well as NASA's Langley and Glenn Research Centers

Time Management in the Operating Room: An Analysis of the Dedicated Minimally Invasive Surgery Suite

Science.gov (United States)

Hsiao, Kenneth C.; Machaidze, Zurab

2004-01-01

Background: Dedicated minimally invasive surgery suites are available that contain specialized equipment to facilitate endoscopic surgery. Laparoscopy performed in a general operating room is hampered by the multitude of additional equipment that must be transported into the room. The objective of this study was to compare the preparation times between procedures performed in traditional operating rooms versus dedicated minimally invasive surgery suites to see whether operating room efficiency is improved in the specialized room. Methods: The records of 50 patients who underwent laparoscopic procedures between September 2000 and April 2002 were retrospectively reviewed. Twenty-three patients underwent surgery in a general operating room and 18 patients in an minimally invasive surgery suite. Nine patients were excluded because of cystoscopic procedures undergone prior to laparoscopy. Various time points were recorded from which various time intervals were derived, such as preanesthesia time, anesthesia induction time, and total preparation time. A 2-tailed, unpaired Student t test was used for statistical analysis. Results: The mean preanesthesia time was significantly faster in the minimally invasive surgery suite (12.2 minutes) compared with that in the traditional operating room (17.8 minutes) (P=0.013). Mean anesthesia induction time in the minimally invasive surgery suite (47.5 minutes) was similar to time in the traditional operating room (45.7 minutes) (P=0.734). The average total preparation time for the minimally invasive surgery suite (59.6 minutes) was not significantly faster than that in the general operating room (63.5 minutes) (P=0.481). Conclusion: The amount of time that elapses between the patient entering the room and anesthesia induction is statically shorter in a dedicated minimally invasive surgery suite. Laparoscopic surgery is performed more efficiently in a dedicated minimally invasive surgery suite versus a traditional operating room. PMID

Hydrogen abstraction reactions by amide electron adducts

International Nuclear Information System (INIS)

Sevilla, M.D.; Sevilla, C.L.; Swarts, S.

1982-01-01

Electron reactions with a number of peptide model compounds (amides and N-acetylamino acids) in aqueous glasses at low temperature have been investigated using ESR spectroscopy. The radicals produced by electron attachment to amides, RC(OD)NDR', are found to act as hydrogen abstracting agents. For example, the propionamide electron adduct is found to abstract from its parent propionamide. Electron adducts of other amides investigated show similar behavior except for acetamide electron adduct which does not abstract from its parent compound, but does abstract from other amides. The tendency toward abstraction for amide electron adducts are compared to electron adducts of several carboxylic acids, ketones, aldehydes and esters. The comparison suggests the hydrogen abstraction tendency of the various deuterated electron adducts (DEAs) to be in the following order: aldehyde DEA > acid DEA = approximately ester DEA > ketone DEA > amide DEA. In basic glasses the hydrogen abstraction ability of the amide electron adducts is maintained until the concentration of base is increased sufficiently to convert the DEA to its anionic form, RC(O - )ND 2 . In this form the hydrogen abstracting ability of the radical is greatly diminished. Similar results were found for the ester and carboxylic acid DEA's tested. (author)

Evaluating Data Abstraction Assistant, a novel software application for data abstraction during systematic reviews: protocol for a randomized controlled trial

Directory of Open Access Journals (Sweden)

Ian J. Saldanha

2016-11-01

Full Text Available Abstract Background Data abstraction, a critical systematic review step, is time-consuming and prone to errors. Current standards for approaches to data abstraction rest on a weak evidence base. We developed the Data Abstraction Assistant (DAA, a novel software application designed to facilitate the abstraction process by allowing users to (1 view study article PDFs juxtaposed to electronic data abstraction forms linked to a data abstraction system, (2 highlight (or “pin” the location of the text in the PDF, and (3 copy relevant text from the PDF into the form. We describe the design of a randomized controlled trial (RCT that compares the relative effectiveness of (A DAA-facilitated single abstraction plus verification by a second person, (B traditional (non-DAA-facilitated single abstraction plus verification by a second person, and (C traditional independent dual abstraction plus adjudication to ascertain the accuracy and efficiency of abstraction. Methods This is an online, randomized, three-arm, crossover trial. We will enroll 24 pairs of abstractors (i.e., sample size is 48 participants, each pair comprising one less and one more experienced abstractor. Pairs will be randomized to abstract data from six articles, two under each of the three approaches. Abstractors will complete pre-tested data abstraction forms using the Systematic Review Data Repository (SRDR, an online data abstraction system. The primary outcomes are (1 proportion of data items abstracted that constitute an error (compared with an answer key and (2 total time taken to complete abstraction (by two abstractors in the pair, including verification and/or adjudication. Discussion The DAA trial uses a practical design to test a novel software application as a tool to help improve the accuracy and efficiency of the data abstraction process during systematic reviews. Findings from the DAA trial will provide much-needed evidence to strengthen current recommendations for data

Immersion Suit Usage Within the RAAF

Science.gov (United States)

1992-01-01

IMMERSION SUIT USED UVIC QDIS HOLDINGS 202. in 12 Sizes, held by ALSS 492SQN REQUIREMENTS No comment USAGE POLICY REFERENCE DIRAF) AAP 7215.004-1 (P3C...held by ALSS 492SQN. REQUIREMENTS No comment ISACE POLICY REFERENCE DIIAF) AAP 7215.004-1 (P3C Flight Manual) RAAF Supplement No 92 USAGE POUICY UVIC...TYPE P3C REFERENCE Telecon FLTLT Toft I I SQNfRESO AVMED Dated 22 Mar 91 IMMERSION SUIT USED UVIC QDIS HOLDINGS No comment REQUIREMENTS No comment USAGE

The ChemCam Instrument Suite on the Mars Science Laboratory (MSL) Rover: Body Unit and Combined System Tests

International Nuclear Information System (INIS)

Wiens, Roger C.; Barraclough, Bruce; Barkley, Walter C.; Bender, Steve; Bernardin, John; Bultman, Nathan; Clanton, Robert C.; Clegg, Samuel; Delapp, Dorothea; Dingler, Robert; Enemark, Don; Flores, Mike; Hale, Thomas; Lanza, Nina; Lasue, Jeremie; Latino, Joseph; Little, Cynthia; Morrison, Leland; Nelson, Tony; Romero, Frank; Salazar, Steven; Stiglich, Ralph; Storms, Steven; Trujillo, Tanner; Ulibarri, Mike; Vaniman, David; Whitaker, Robert; Witt, James; Maurice, Sylvestre; Bouye, Marc; Cousin, Agnes; Cros, Alain; D'Uston, Claude; Forni, Olivier; Gasnault, Olivier; Kouach, Driss; Lasue, Jeremie; Pares, Laurent; Poitrasson, Franck; Striebig, Nicolas; Thocaven, Jean-Jacques; Saccoccio, Muriel; Perez, Rene; Bell, James F. III; Hays, Charles; Blaney, Diana; DeFlores, Lauren; Elliott, Tom; Kan, Ed; Limonadi, Daniel; Lindensmith, Chris; Miller, Ed; Reiter, Joseph W.; Roberts, Tom; Simmonds, John J.; Warner, Noah; Blank, Jennifer; Bridges, Nathan; Cais, Phillippe; Clark, Benton; Cremers, David; Dyar, M. Darby; Fabre, Cecile; Herkenhoff, Ken; Kirkland, Laurel; Landis, David; Langevin, Yves; Lanza, Nina; Newsom, Horton; Ollila, Ann; LaRocca, Frank; Ott, Melanie; Mangold, Nicolas; Manhes, Gerard; Mauchien, Patrick; Blank, Jennifer; McKay, Christopher; Mooney, Joe; Provost, Cheryl; Morris, Richard V.; Sautter, Violaine; Sautter, Violaine; Waterbury, Rob; Wong-Swanson, Belinda; Barraclough, Bruce; Bender, Steve; Vaniman, David

2012-01-01

The ChemCam instrument suite on the Mars Science Laboratory (MSL) rover Curiosity provides remote compositional information using the first laser-induced breakdown spectrometer (LIBS) on a planetary mission, and provides sample texture and morphology data using a remote micro-imager (RMI). Overall, ChemCam supports MSL with five capabilities: remote classification of rock and soil characteristics; quantitative elemental compositions including light elements like hydrogen and some elements to which LIBS is uniquely sensitive (e.g., Li, Be, Rb, Sr, Ba); remote removal of surface dust and depth profiling through surface coatings; context imaging; and passive spectroscopy over the 240-905 nm range. ChemCam is built in two sections: The mast unit, consisting of a laser, telescope, RMI, and associated electronics, resides on the rover's mast, and is described in a companion paper. ChemCam's body unit, which is mounted in the body of the rover, comprises an optical de-multiplexer, three spectrometers, detectors, their coolers, and associated electronics and data handling logic. Additional instrument components include a 6 m optical fiber which transfers the LIBS light from the telescope to the body unit, and a set of onboard calibration targets. ChemCam was integrated and tested at Los Alamos National Laboratory where it also underwent LIBS calibration with 69 geological standards prior to integration with the rover. Post-integration testing used coordinated mast and instrument commands, including LIBS line scans on rock targets during system-level thermal-vacuum tests. In this paper we describe the body unit, optical fiber, and calibration targets, and the assembly, testing, and verification of the instrument prior to launch. (authors)

Advanced Sensor Platform to Evaluate Manloads for Exploration Suit Architectures

Data.gov (United States)

National Aeronautics and Space Administration — Space suit manloads are defined as the outer bounds of force that the human occupant of a suit is able to exert onto the suit during motion. They are defined on a...

Safety Precautions and Operating Procedures in an (A)BSL-4 Laboratory: 1. Biosafety Level 4 Suit Laboratory Suite Entry and Exit Procedures.

Science.gov (United States)

Janosko, Krisztina; Holbrook, Michael R; Adams, Ricky; Barr, Jason; Bollinger, Laura; Newton, Je T'aime; Ntiforo, Corrie; Coe, Linda; Wada, Jiro; Pusl, Daniela; Jahrling, Peter B; Kuhn, Jens H; Lackemeyer, Matthew G

2016-10-03

Biosafety level 4 (BSL-4) suit laboratories are specifically designed to study high-consequence pathogens for which neither infection prophylaxes nor treatment options exist. The hallmarks of these laboratories are: custom-designed airtight doors, dedicated supply and exhaust airflow systems, a negative-pressure environment, and mandatory use of positive-pressure ("space") suits. The risk for laboratory specialists working with highly pathogenic agents is minimized through rigorous training and adherence to stringent safety protocols and standard operating procedures. Researchers perform the majority of their work in BSL-2 laboratories and switch to BSL-4 suit laboratories when work with a high-consequence pathogen is required. Collaborators and scientists considering BSL-4 projects should be aware of the challenges associated with BSL-4 research both in terms of experimental technical limitations in BSL-4 laboratory space and the increased duration of such experiments. Tasks such as entering and exiting the BSL-4 suit laboratories are considerably more complex and time-consuming compared to BSL-2 and BSL-3 laboratories. The focus of this particular article is to address basic biosafety concerns and describe the entrance and exit procedures for the BSL-4 laboratory at the NIH/NIAID Integrated Research Facility at Fort Detrick. Such procedures include checking external systems that support the BSL-4 laboratory, and inspecting and donning positive-pressure suits, entering the laboratory, moving through air pressure-resistant doors, and connecting to air-supply hoses. We will also discuss moving within and exiting the BSL-4 suit laboratories, including using the chemical shower and removing and storing positive-pressure suits.

Satellite Ocean Heat Content Suite

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This collection contains an operational Satellite Ocean Heat Content Suite (SOHCS) product generated by NOAA National Environmental Satellite, Data, and Information...

EVA Suit Microbial Leakage Investigation

Data.gov (United States)

National Aeronautics and Space Administration — The objective of this project is to collect microbial samples from various EVA suits to determine how much microbial contamination is typically released during...

EVA Physiology and Medical Considerations Working in the Suit

Science.gov (United States)

Parazynski, Scott

2012-01-01

This "EVA Physiology and Medical Considerations Working in the Suit" presentation covers several topics related to the medical implications and physiological effects of suited operations in space from the perspective of a physician with considerable first-hand Extravehicular Activity (EVA) experience. Key themes include EVA physiology working in a pressure suit in the vacuum of space, basic EVA life support and work support, Thermal Protection System (TPS) inspections and repairs, and discussions of the physical challenges of an EVA. Parazynski covers the common injuries and significant risks during EVAs, as well as physical training required to prepare for EVAs. He also shares overall suit physiological and medical knowledge with the next generation of Extravehicular Mobility Unit (EMU) system designers.

Space suit glove design with advanced metacarpal phalangeal joints and robotic hand evaluation.

Science.gov (United States)

Southern, Theodore; Roberts, Dustyn P; Moiseev, Nikolay; Ross, Amy; Kim, Joo H

2013-06-01

One area of space suits that is ripe for innovation is the glove. Existing models allow for some fine motor control, but the power grip--the act of grasping a bar--is cumbersome due to high torque requirements at the knuckle or metacarpal phalangeal joint (MCP). This area in particular is also a major source of complaints of pain and injury as reported by astronauts. This paper explores a novel fabrication and patterning technique that allows for more freedom of movement and less pain at this crucial joint in the manned space suit glove. The improvements are evaluated through unmanned testing, manned testing while depressurized in a vacuum glove box, and pressurized testing with a robotic hand. MCP joint flex score improved from 6 to 6.75 (out of 10) in the final glove relative to the baseline glove, and torque required for flexion decreased an average of 17% across all fingers. Qualitative assessments during unpressurized and depressurized manned testing also indicated the final glove was more comfortable than the baseline glove. The quantitative results from both human subject questionnaires and robotic torque evaluation suggest that the final iteration of the glove design enables flexion at the MCP joint with less torque and more comfort than the baseline glove.

The BRITNeY Suite: A Platfor for Experiments

DEFF Research Database (Denmark)

Westergaard, Michael

2006-01-01

This paper describes a platform, the BRITNeY Suite, for experimenting with Coloured Petri nets. The BRITNeY Suite provides access to data-structures and a simulator for Coloured Petri nets via a powerful scripting language and plug-in-mechanism, thereby making it easy to perform customized...

EDL Sensor Suite, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Optical Air Data Systems (OADS) L.L.C. proposes a LIDAR based remote measurement sensor suite capable of satisfying a significant number of the desired sensing...

Solid-solid phase change thermal storage application to space-suit battery pack

Science.gov (United States)

Son, Chang H.; Morehouse, Jeffrey H.

1989-01-01

High cell temperatures are seen as the primary safety problem in the Li-BCX space battery. The exothermic heat from the chemical reactions could raise the temperature of the lithium electrode above the melting temperature. Also, high temperature causes the cell efficiency to decrease. Solid-solid phase-change materials were used as a thermal storage medium to lower this battery cell temperature by utilizing their phase-change (latent heat storage) characteristics. Solid-solid phase-change materials focused on in this study are neopentyl glycol and pentaglycerine. Because of their favorable phase-change characteristics, these materials appear appropriate for space-suit battery pack use. The results of testing various materials are reported as thermophysical property values, and the space-suit battery operating temperature is discussed in terms of these property results.

Variable Vector Countermeasure Suit for Space Habitation and Exploration

Data.gov (United States)

National Aeronautics and Space Administration — The "Variable Vector Countermeasure Suit (V2Suit) for Space Habitation and Exploration" is a visionary system concept that will revolutionize space missions by...

NetSuite OneWorld Implementation 2011 R2

CERN Document Server

Foydel, Thomas

2011-01-01

This book is a focused, step-by step tutorial that shows you how to successfully implement NetSuite OneWorld into your organization. It is written in an easy-to-read style, with a strong emphasis on real-world, practical examples with step-by-step explanations. The book focuses on NetSuite OneWorld 2011 R1. If you are an application administrator, business analyst, project team member or business process owner who wants to implement NetSuite OneWorld into your organization, then this book is for you. This book might also be useful if you are a business manager considering a new system for your

Prokofieff: Krieg und Frieden (Sinfonische Suite), Die Verlobung im Kloster (Sommernacht-Suite), Russische Overtüre. Philharmonia Orchestra, Neeme Järvi / G. W.

Index Scriptorium Estoniae

G. W.

1993-01-01

Uuest heliplaadist "Prokofieff: Krieg und Frieden (Sinfonische Suite), Die Verlobung im Kloster (Sommernacht-Suite), Russische Overtüre. Philharmonia Orchestra, Neeme Järvi. (AD: 1991). Chandos/Koch CD 9096

Local confidence limits for IMRT and VMAT techniques: a study based on TG119 test suite

International Nuclear Information System (INIS)

Thomas, M.; Chandroth, M.

2014-01-01

The aim of this study was to generate a local confidence limit (CL) for intensity modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT) techniques used at Waikato Regional Cancer Centre. This work was carried out based on the American Association of Physicists in Medicine (AAPM) Task Group (TG) 119 report. The AAPM TG 119 report recommends CLs as a bench mark for IMRT commissioning and delivery based on its multiple institutions planning and dosimetry comparisons. In this study the locally obtained CLs were compared to TG119 benchmarks. Furthermore, the same bench mark was used to test the capabilities and quality of the VMAT technique in our clinic. The TG 119 test suite consists of two primary and four clinical tests for evaluating the accuracy of IMRT planning and dose delivery systems. Pre defined structure sets contoured on computed tomography images were downloaded from AAPM website and were transferred to a locally designed phantom. For each test case two plans were generated using IMRT and VMAT optimisation. Dose prescriptions and planning objectives recommended by TG119 report were followed to generate the test plans in Eclipse Treatment Planning System. For each plan the point dose measurements were done using an ion chamber at high dose and low dose regions. The planar dose distribution was analysed for percentage of points passing the gamma criteria of 3 %/3 mm, for both the composite plan and individual fields of each plan. The CLs were generated based on the results from the gamma analysis and point dose measurements. For IMRT plans, the CLs obtained were (1) from point dose measurements: 2.49 % at high dose region and 2.95 % for the low dose region (2) from gamma analysis: 2.12 % for individual fields and 5.9 % for the composite plan. For VMAT plans, the CLs obtained were (1) from point dose measurements: 2.56 % at high dose region and 2.6 % for the low dose region (2) from gamma analysis: 1.46 % for individual fields and 0

Software Application Profile: RVPedigree: a suite of family-based rare variant association tests for normally and non-normally distributed quantitative traits.

Science.gov (United States)

Oualkacha, Karim; Lakhal-Chaieb, Lajmi; Greenwood, Celia Mt

2016-04-01

RVPedigree (Rare Variant association tests in Pedigrees) implements a suite of programs facilitating genome-wide analysis of association between a quantitative trait and autosomal region-based genetic variation. The main features here are the ability to appropriately test for association of rare variants with non-normally distributed quantitative traits, and also to appropriately adjust for related individuals, either from families or from population structure and cryptic relatedness. RVPedigree is available as an R package. The package includes calculation of kinship matrices, various options for coping with non-normality, three different ways of estimating statistical significance incorporating triaging to enable efficient use of the most computationally-intensive calculations, and a parallelization option for genome-wide analysis. The software is available from the Comprehensive R Archive Network [CRAN.R-project.org] under the name 'RVPedigree' and at [https://github.com/GreenwoodLab]. It has been published under General Public License (GPL) version 3 or newer. © The Author 2016; all rights reserved. Published by Oxford University Press on behalf of the International Epidemiological Association.

Dtest Testing Software

Science.gov (United States)

Jain, Abhinandan; Cameron, Jonathan M.; Myint, Steven

2013-01-01

This software runs a suite of arbitrary software tests spanning various software languages and types of tests (unit level, system level, or file comparison tests). The dtest utility can be set to automate periodic testing of large suites of software, as well as running individual tests. It supports distributing multiple tests over multiple CPU cores, if available. The dtest tool is a utility program (written in Python) that scans through a directory (and its subdirectories) and finds all directories that match a certain pattern and then executes any tests in that directory as described in simple configuration files.

Assessing the Effectiveness of Defensive Aid Suite Technology Using a Field Trial and Modelling and Simulation

National Research Council Canada - National Science Library

Fournier, Pierre

2002-01-01

...) community that Defensive Aid Suite (DAS) technologies can improve the protection of LAVs. A prototype DAS system was developed by DRDC Valcartier and tested in field trials held in 1995 and 1999...

Instrumented Suit Hard Upper Torso (HUT) for Ergonomic Assessment

Data.gov (United States)

National Aeronautics and Space Administration — It is well known that the EVA suit (EMU) has the potential to cause crew injury and decreased performance. Engineering data on the suit interaction of the human...

Mathematical Abstraction: Constructing Concept of Parallel Coordinates

Science.gov (United States)

Nurhasanah, F.; Kusumah, Y. S.; Sabandar, J.; Suryadi, D.

2017-09-01

Mathematical abstraction is an important process in teaching and learning mathematics so pre-service mathematics teachers need to understand and experience this process. One of the theoretical-methodological frameworks for studying this process is Abstraction in Context (AiC). Based on this framework, abstraction process comprises of observable epistemic actions, Recognition, Building-With, Construction, and Consolidation called as RBC + C model. This study investigates and analyzes how pre-service mathematics teachers constructed and consolidated concept of Parallel Coordinates in a group discussion. It uses AiC framework for analyzing mathematical abstraction of a group of pre-service teachers consisted of four students in learning Parallel Coordinates concepts. The data were collected through video recording, students’ worksheet, test, and field notes. The result shows that the students’ prior knowledge related to concept of the Cartesian coordinate has significant role in the process of constructing Parallel Coordinates concept as a new knowledge. The consolidation process is influenced by the social interaction between group members. The abstraction process taken place in this group were dominated by empirical abstraction that emphasizes on the aspect of identifying characteristic of manipulated or imagined object during the process of recognizing and building-with.

Grounding abstractness: Abstract concepts and the activation of the mouth

Directory of Open Access Journals (Sweden)

Anna M Borghi

2016-10-01

Full Text Available One key issue for theories of cognition is how abstract concepts, such as freedom, are represented. According to the WAT (Words As social Tools proposal, abstract concepts activate both sensorimotor and linguistic/social information, and their acquisition modality involves the linguistic experience more than the acquisition of concrete concepts. We report an experiment in which participants were presented with abstract and concrete definitions followed by concrete and abstract target-words. When the definition and the word matched, participants were required to press a key, either with the hand or with the mouth. Response times and accuracy were recorded. As predicted, we found that abstract definitions and abstract words yielded slower responses and more errors compared to concrete definitions and concrete words. More crucially, there was an interaction between the target-words and the effector used to respond (hand, mouth. While responses with the mouth were overall slower, the advantage of the hand over the mouth responses was more marked with concrete than with abstract concepts. The results are in keeping with grounded and embodied theories of cognition and support the WAT proposal, according to which abstract concepts evoke linguistic-social information, hence activate the mouth. The mechanisms underlying the mouth activation with abstract concepts (re-enactment of acquisition experience, or re-explanation of the word meaning, possibly through inner talk are discussed. To our knowledge this is the first behavioral study demonstrating with real words that the advantage of the hand over the mouth is more marked with concrete than with abstract concepts, likely because of the activation of linguistic information with abstract concepts.

Automatic Processing of Metallurgical Abstracts for the Purpose of Information Retrieval. Final Report.

Science.gov (United States)

Melton, Jessica S.

Objectives of this project were to develop and test a method for automatically processing the text of abstracts for a document retrieval system. The test corpus consisted of 768 abstracts from the metallurgical section of Chemical Abstracts (CA). The system, based on a subject indexing rational, had two components: (1) a stored dictionary of words…

NASA Research Announcement Phase 1 Report and Phase 2 Proposal for the Development of a Power Assisted Space Suit Glove Assembly

Science.gov (United States)

Cadogan, Dave; Lingo, Bob

1996-01-01

In July of 1996, ILC Dover was awarded Phase 1 of a contract for NASA to develop a prototype Power Assisted Space Suit glove to enhance the performance of astronauts during Extra-Vehicular Activity (EVA). This report summarizes the work performed to date on Phase 1, and details the work to be conducted on Phase 2 of the program. Phase 1 of the program consisted of research and review of related technical sources, concept brainstorming, baseline design development, modeling and analysis, component mock-up testing, and test data analysis. ILC worked in conjunction with the University of Maryland's Space Systems Laboratory (SSL) to develop the power assisted glove. Phase 2 activities will focus on the design maturation and the manufacture of a working prototype system. The prototype will be tested and evaluated in conjunction with existing space suit glove technology to determine the performance enhancement anticipated with the implementation of the power assisted joint technology in space suit gloves.

Technical Reference Suite Addressing Challenges of Providing Assurance for Fault Management Architectural Design

Science.gov (United States)

Fitz, Rhonda; Whitman, Gerek

2016-01-01

Research into complexities of software systems Fault Management (FM) and how architectural design decisions affect safety, preservation of assets, and maintenance of desired system functionality has coalesced into a technical reference (TR) suite that advances the provision of safety and mission assurance. The NASA Independent Verification and Validation (IV&V) Program, with Software Assurance Research Program support, extracted FM architectures across the IV&V portfolio to evaluate robustness, assess visibility for validation and test, and define software assurance methods applied to the architectures and designs. This investigation spanned IV&V projects with seven different primary developers, a wide range of sizes and complexities, and encompassed Deep Space Robotic, Human Spaceflight, and Earth Orbiter mission FM architectures. The initiative continues with an expansion of the TR suite to include Launch Vehicles, adding the benefit of investigating differences intrinsic to model-based FM architectures and insight into complexities of FM within an Agile software development environment, in order to improve awareness of how nontraditional processes affect FM architectural design and system health management. The identification of particular FM architectures, visibility, and associated IV&V techniques provides a TR suite that enables greater assurance that critical software systems will adequately protect against faults and respond to adverse conditions. Additionally, the role FM has with regard to strengthened security requirements, with potential to advance overall asset protection of flight software systems, is being addressed with the development of an adverse conditions database encompassing flight software vulnerabilities. Capitalizing on the established framework, this TR suite provides assurance capability for a variety of FM architectures and varied development approaches. Research results are being disseminated across NASA, other agencies, and the

Interaction of Space Suits with Windblown Soil: Preliminary Mars Wind Tunnel Results

Science.gov (United States)

Marshall, J.; Bratton, C.; Kosmo, J.; Trevino, R.

1999-09-01

Experiments in the Mars Wind Tunnel at NASA Ames Research Center show that under Mars conditions, spacesuit materials are highly susceptible to dust contamination when exposed to windblown soil. This effect was suspected from knowledge of the interaction of electrostatically adhesive dust with solid surfaces in general. However, it is important to evaluate the respective roles of materials, meteorological and radiation effects, and the character of the soil. The tunnel permits evaluation of dust contamination and sand abrasion of space suits by simulating both pressure and wind conditions on Mars. The long-term function of space suits on Mars will be primarily threatened by dust contamination. Lunar EVA activities caused heavy contamination of space suits, but the problem was never seriously manifest because of the brief utilization of the suits, and the suits were never reused. Electrostatically adhering dust grains have various detrimental effects: (1) penetration and subsequent wear of suit fabrics, (2) viewing obscuration through visors and scratching/pitting of visor surfaces, (3) penetration, wear, and subsequent seizing-up of mechanical suit joints, (4) changes in albedo and therefore of radiation properties of external heat-exchanger systems, (5) changes in electrical conductivity of suit surfaces which may affect tribocharging of suits and create spurious discharge effects detrimental to suit electronics/radio systems. Additional information is contained in the original.

Inertial motion capture system for biomechanical analysis in pressure suits

Science.gov (United States)

Di Capua, Massimiliano

A non-invasive system has been developed at the University of Maryland Space System Laboratory with the goal of providing a new capability for quantifying the motion of the human inside a space suit. Based on an array of six microprocessors and eighteen microelectromechanical (MEMS) inertial measurement units (IMUs), the Body Pose Measurement System (BPMS) allows the monitoring of the kinematics of the suit occupant in an unobtrusive, self-contained, lightweight and compact fashion, without requiring any external equipment such as those necessary with modern optical motion capture systems. BPMS measures and stores the accelerations, angular rates and magnetic fields acting upon each IMU, which are mounted on the head, torso, and each segment of each limb. In order to convert the raw data into a more useful form, such as a set of body segment angles quantifying pose and motion, a series of geometrical models and a non-linear complimentary filter were implemented. The first portion of this works focuses on assessing system performance, which was measured by comparing the BPMS filtered data against rigid body angles measured through an external VICON optical motion capture system. This type of system is the industry standard, and is used here for independent measurement of body pose angles. By comparing the two sets of data, performance metrics such as BPMS system operational conditions, accuracy, and drift were evaluated and correlated against VICON data. After the system and models were verified and their capabilities and limitations assessed, a series of pressure suit evaluations were conducted. Three different pressure suits were used to identify the relationship between usable range of motion and internal suit pressure. In addition to addressing range of motion, a series of exploration tasks were also performed, recorded, and analysed in order to identify different motion patterns and trajectories as suit pressure is increased and overall suit mobility is reduced

Nondestructive testing for manufacture and maintenance work. Abstracts

International Nuclear Information System (INIS)

1985-01-01

The opening lecture of the meeting put special emphasis on the economic impact of nuclear energy utilization, whereas the principal lecture discussed the role of nondestructive testing methods in manufacture and maintenance work. A motion picture shown to the audience explained thermoshock experiments in a superheated steam reactor. All in all 32 papers were presented, dealing with nondestructive testing methods using ultrasounds, X-rays, eddy currents, ultrasound imaging, broad-band holography, radiator assemblies, magnet powders, pulse and eddy current signals, and computed tomography. Aircraft testing - in particular welds testing - was a main topic. The papers were supplemented by poster sessions including 60 posters on ultrasound testing, electric and magnetic testing methods, and radiographic testing. (HP) [de

A Secure Communication Suite for Underwater Acoustic Sensor Networks

Directory of Open Access Journals (Sweden)

Angelica Lo Duca

2012-11-01

Full Text Available In this paper we describe a security suite for Underwater Acoustic Sensor Networks comprising both fixed and mobile nodes. The security suite is composed of a secure routing protocol and a set of cryptographic primitives aimed at protecting the confidentiality and the integrity of underwater communication while taking into account the unique characteristics and constraints of the acoustic channel. By means of experiments and simulations based on real data, we show that the suite is suitable for an underwater networking environment as it introduces limited, and sometimes negligible, communication and power consumption overhead.

Oracle E-Business Suite Financials R12 A Functionality Guide

CERN Document Server

Iyer, Mohan

2012-01-01

This is a step-by-step functional guide to get you started easily with Oracle EBS Financials. If you are an Oracle E-Business Suite Financial consultant or an administrator looking to get a quick review on the capabilities of Oracle E-Business Suite and improve the use of the systems functionality, then this is the best guide for you. This book assumes that you have a fundamental knowledge of EBS Suite.

Sentence retrieval for abstracts of randomized controlled trials

Directory of Open Access Journals (Sweden)

Chung Grace Y

2009-02-01

Full Text Available Abstract Background The practice of evidence-based medicine (EBM requires clinicians to integrate their expertise with the latest scientific research. But this is becoming increasingly difficult with the growing numbers of published articles. There is a clear need for better tools to improve clinician's ability to search the primary literature. Randomized clinical trials (RCTs are the most reliable source of evidence documenting the efficacy of treatment options. This paper describes the retrieval of key sentences from abstracts of RCTs as a step towards helping users find relevant facts about the experimental design of clinical studies. Method Using Conditional Random Fields (CRFs, a popular and successful method for natural language processing problems, sentences referring to Intervention, Participants and Outcome Measures are automatically categorized. This is done by extending a previous approach for labeling sentences in an abstract for general categories associated with scientific argumentation or rhetorical roles: Aim, Method, Results and Conclusion. Methods are tested on several corpora of RCT abstracts. First structured abstracts with headings specifically indicating Intervention, Participant and Outcome Measures are used. Also a manually annotated corpus of structured and unstructured abstracts is prepared for testing a classifier that identifies sentences belonging to each category. Results Using CRFs, sentences can be labeled for the four rhetorical roles with F-scores from 0.93–0.98. This outperforms the use of Support Vector Machines. Furthermore, sentences can be automatically labeled for Intervention, Participant and Outcome Measures, in unstructured and structured abstracts where the section headings do not specifically indicate these three topics. F-scores of up to 0.83 and 0.84 are obtained for Intervention and Outcome Measure sentences. Conclusion Results indicate that some of the methodological elements of RCTs are

Exploration Space Suit Architecture: Destination Environmental-Based Technology Development

Science.gov (United States)

Hill, Terry R.

2010-01-01

This paper picks up where EVA Space Suit Architecture: Low Earth Orbit Vs. Moon Vs. Mars (Hill, Johnson, IEEEAC paper #1209) left off in the development of a space suit architecture that is modular in design and interfaces and could be reconfigured to meet the mission or during any given mission depending on the tasks or destination. This paper will walk though the continued development of a space suit system architecture, and how it should evolve to meeting the future exploration EVA needs of the United States space program. In looking forward to future US space exploration and determining how the work performed to date in the CxP and how this would map to a future space suit architecture with maximum re-use of technology and functionality, a series of thought exercises and analysis have provided a strong indication that the CxP space suit architecture is well postured to provide a viable solution for future exploration missions. Through the destination environmental analysis that is presented in this paper, the modular architecture approach provides the lowest mass, lowest mission cost for the protection of the crew given any human mission outside of low Earth orbit. Some of the studies presented here provide a look and validation of the non-environmental design drivers that will become every-increasingly important the further away from Earth humans venture and the longer they are away. Additionally, the analysis demonstrates a logical clustering of design environments that allows a very focused approach to technology prioritization, development and design that will maximize the return on investment independent of any particular program and provide architecture and design solutions for space suit systems in time or ahead of being required for any particular manned flight program in the future. The new approach to space suit design and interface definition the discussion will show how the architecture is very adaptable to programmatic and funding changes with

New Lithium-ion Polymer Battery for the Extravehicular Mobility Unit Suit

Science.gov (United States)

Jeevarajan, J. A.; Darcy, E. C.

2004-01-01

The Extravehicular Mobility Unit (EMU) suit currently has a silver-zinc battery that is 20.5 V and 45 Ah capacity. The EMU's portable life support system (PLSS) will draw power from the battery during the entire period of an EVA. Due to the disadvantages of using the silver-zinc battery in terms of cost and performance, a new high energy density battery is being developed for future use, The new battery (Lithium-ion battery or LIB) will consist of Li-ion polymer cells that will provide power to the EMU suit. The battery design consists of five 8 Ah cells in parallel to form a single module of 40 Ah and five such modules will be placed in series to give a 20.5 V, 40 Ah battery. Charging will be accomplished on the Shuttle or Station using the new LIB charger or the existing ALPS (Air Lock Power Supply) charger. The LIB delivers a maximum of 3.8 A on the average, for seven continuous hours, at voltages ranging from 20.5 V to 16.0 V and it should be capable of supporting transient pulses during start up and once every hour to support PLSS fan and pump operation. Figure 1 shows the placement of the battery in the backpack area of the EMU suit. The battery and cells will undergo testing under different conditions to understand its performance and safety characteristics.

Cosmonaut Sergei Krikalev receives assistance from suit technician

Science.gov (United States)

1994-01-01

Sergei Krikalev, alternative mission specialist for STS-63, gets help from Dawn Mays, a Boeing suit technician. The cosmonaut was about to participate in a training session at JSC's Weightless Environment Training Facility (WETF). Wearing the training version of the extravehicular mobility unit (EMU) space suit, weighted to allow neutral buoyancy in the 25 feet deep WETF pool, Krikalev minutes later was underwater simulating a contingency spacewalk, or extravehicular activity (EVA).

The BTeV Software Tutorial Suite

International Nuclear Information System (INIS)

Kutschke, Robert K.

2004-01-01

The BTeV Collaboration is starting to develop its C++ based offline software suite, an integral part of which is a series of tutorials. These tutorials are targeted at a diverse audience, including new graduate students, experienced physicists with little or no C++ experience, those with just enough C++ to be dangerous, and experts who need only an overview of the available tools. The tutorials must both teach C++ in general and the BTeV specific tools in particular. Finally, they must teach physicists how to find and use the detailed documentation. This report will review the status of the BTeV experiment, give an overview of the plans for and the state of the software and will then describe the plans for the tutorial suite

The antigravity suit in neurosurgery. Cardiovascular responses in seated neurosurgical patients.

Science.gov (United States)

Brodrick, P M; Ingram, G S

1988-09-01

The haemodynamic responses associated with inflation of the antigravity suit (G suit, aviation type) to 8.0 kPa were studied in a series of 40 patients who underwent neurosurgical operations in the sitting position. The study showed statistically significant increases in systolic arterial pressure (p less than 0.005) and mean central venous pressure (p less than 0.001) with inflation of the suit. The systolic arterial and mean central venous pressures remained significantly elevated immediately before deflation of the suit at the end of the operation (p less than 0.001 and p less than 0.005 respectively). The addition of 0.8-1.0 kPa positive end expiratory pressure during suit inflation was also investigated. A further increase in central venous pressure occurred but this did not achieve statistical significance.

Characterization of the Radiation Shielding Properties of US and Russian EVA Suits

International Nuclear Information System (INIS)

Benton, E.R.; Benton, E.V.; Frank, A.L.

2001-01-01

Reported herein are results from the Eril Research, Inc. (ERI) participation in the NASA Johnson Space Center sponsored study characterizing the radiation shielding properties of the two types of space suit that astronauts are wearing during the EVA on-orbit assembly of the International Space Station (ISS). Measurements using passive detectors were carried out to assess the shielding properties of the USEMU Suit and the Russian Orlan-M suit during irradiations of the suits and a tissue equivalent phantom to monoenergetic proton and electron beams at the Loma Linda University Medical Center (LLUMC). During irradiations of 6 MeV electrons and 60 MeV protons, absorbed dose as a function of depth was measured using TLDs exposed behind swatches of the two suit materials and inside the two EVA helmets. Considerable reduction in electron dose was measured behind all suit materials in exposures to 6MeV electrons. Slowing of the proton beam in the suit materials led to an increase in dose measured in exposures to 60 MeV protons. During 232 MeV proton irradiations, measurements were made with TLDs and CR-39 PNTDs at five organ locations inside a tissue equivalent phantom, exposed both with and without the two EVA suits. The EVA helmets produce a 13 to 27 percent reduction in total dose and a 0 to 25 percent reduction in dose equivalent when compared to measurements made in the phantom head alone. Differences in dose and dose equivalent between the suit and non-suit irradiations for the lower portions of the two EVA suits tended to be smaller. Proton-induced target fragmentation was found to be a significant source of increased dose equivalent, especially within the two EVA helmets, and average quality factor inside the EMU and Orlan-M helmets was 2 to 14 percent greater than that measured in the bare phantom head

Manipulating Objects and Telling Words: A Study on Concrete and Abstract Words Acquisition

Science.gov (United States)

Borghi, Anna M.; Flumini, Andrea; Cimatti, Felice; Marocco, Davide; Scorolli, Claudia

2011-01-01

Four experiments (E1–E2–E3–E4) investigated whether different acquisition modalities lead to the emergence of differences typically found between concrete and abstract words, as argued by the words as tools (WAT) proposal. To mimic the acquisition of concrete and abstract concepts, participants either manipulated novel objects or observed groups of objects interacting in novel ways (Training 1). In TEST 1 participants decided whether two elements belonged to the same category. Later they read the category labels (Training 2); labels could be accompanied by an explanation of their meaning. Then participants observed previously seen exemplars and other elements, and were asked which of them could be named with a given label (TEST 2). Across the experiments, it was more difficult to form abstract than concrete categories (TEST 1); even when adding labels, abstract words remained more difficult than concrete words (TEST 2). TEST 3 differed across the experiments. In E1 participants performed a feature production task. Crucially, the associations produced with the novel words reflected the pattern evoked by existing concrete and abstract words, as the first evoked more perceptual properties. In E2–E3–E4, TEST 3 consisted of a color verification task with manual/verbal (keyboard–microphone) responses. Results showed the microphone use to have an advantage over keyboard use for abstract words, especially in the explanation condition. This supports WAT: due to their acquisition modality, concrete words evoke more manual information; abstract words elicit more verbal information. This advantage was not present when linguistic information contrasted with perceptual one. Implications for theories and computational models of language grounding are discussed. PMID:21716582

Experience with Wolsong-1 Phase-B pre-simulations using WIMS/DRAGON/RFSP-IST code suite

International Nuclear Information System (INIS)

Chung, D-H.; Kim, B-G.; Kim, S-M.; Suh, H-B.; Kim, H-S.; Kim, H-J.

2010-01-01

The Wolsong-1 Phase-B pre-simulations have been carried out with the exclusive use of the code suite WIMS/DRAGON/RFSP-IST in replacement of the previous PPV/MULTICELL/RFSP code system in preparation of tests to be conducted as scheduled in December 2010 after the refurbishment. A comprehensive simulation package has been undertaken starting from the approach to first criticality to the flux measurements and scan. In order to secure the validity of the results, the simulations are performed using both the Uniform and SCM fuel tables. An elaborating contribution has been invested into the work in view of the inexperience of using WIMS/SCM fuel tables as well as incremental cross sections generated by using DRAGON-IST. The overall assessment of simulation results indicates that the newly adopted WIMS/DRAGON/RFSP-IST code suite could be used in replacement of PPV/MULTICELL/RFSP for the verification against the Phase-B test results. (author)

Comparison of Effectiveness of Adeli Suit Therapy and Bobath Approach on Gross Motor Function Improvement in Children with Cerebral Palsy

Directory of Open Access Journals (Sweden)

Mohammad Khayat-Zadeh-Mahani

2010-07-01

Full Text Available Objective: The aim of this study was to determine the effectiveness of Adeli Suit Therapy (AST and Bobath approach on improvement of gross motor function in children with cerebral palsy aged 4 to 11 years of old. Materials & Methods: In this experimental and randomized clinical trial study, 24 children with cerebral palsy were selected simply according to inclusive and exclusive criteria from patients referred to ValieAsr rehabilitation center and then assigned into two Adeli Suit Thrapy and Bobath groups by simple random method. Period of therapeutic intervention was 36 sessions, 3 times per week for both groups. Assessment tool was Gross Motor Function Measure test (GMFM–66. Data was analyzed by Kolmogroff Smirnoff, Independent T-test and ANOVA for repeated measurements. Results: After intervention, the gross motor function improved significantly in both groups (P<0.001. Follow up study revealed significant improvement of functions in Adeli Suit group (P=0.007 and significant regression of functions in Bobath group (P=0.004. There was no significant difference, just after the intervention, between two groups (P=0.598, but there was significant difference between two groups at follow up assessments (P=0.002. Conclusion: Both Adeli Suit and Bobath approaches are effective in improvement of gross motor functions in children with cerebral palsy during the therapeutic sessions. At follow up study, the Adeli Suit group, were still improving their function whereas the Bobath group regressed.

Extending the GI Brokering Suite to Support New Interoperability Specifications

Science.gov (United States)

Boldrini, E.; Papeschi, F.; Santoro, M.; Nativi, S.

2014-12-01

The GI brokering suite provides the discovery, access, and semantic Brokers (i.e. GI-cat, GI-axe, GI-sem) that empower a Brokering framework for multi-disciplinary and multi-organizational interoperability. GI suite has been successfully deployed in the framework of several programmes and initiatives, such as European Union funded projects, NSF BCube, and the intergovernmental coordinated effort Global Earth Observation System of Systems (GEOSS). Each GI suite Broker facilitates interoperability for a particular functionality (i.e. discovery, access, semantic extension) among a set of brokered resources published by autonomous providers (e.g. data repositories, web services, semantic assets) and a set of heterogeneous consumers (e.g. client applications, portals, apps). A wide set of data models, encoding formats, and service protocols are already supported by the GI suite, such as the ones defined by international standardizing organizations like OGC and ISO (e.g. WxS, CSW, SWE, GML, netCDF) and by Community specifications (e.g. THREDDS, OpenSearch, OPeNDAP, ESRI APIs). Using GI suite, resources published by a particular Community or organization through their specific technology (e.g. OPeNDAP/netCDF) can be transparently discovered, accessed, and used by different Communities utilizing their preferred tools (e.g. a GIS visualizing WMS layers). Since Information Technology is a moving target, new standards and technologies continuously emerge and are adopted in the Earth Science context too. Therefore, GI Brokering suite was conceived to be flexible and accommodate new interoperability protocols and data models. For example, GI suite has recently added support to well-used specifications, introduced to implement Linked data, Semantic Web and precise community needs. Amongst the others, they included: DCAT: a RDF vocabulary designed to facilitate interoperability between Web data catalogs. CKAN: a data management system for data distribution, particularly used by

An Ergonomic Evaluation of the Extravehicular Mobility Unit (EMU) Space Suit Hard Upper Torso (HUT) Size Effect on Metabolic, Mobility, and Strength Performance

Science.gov (United States)

Reid, Christopher; Harvill, Lauren; England, Scott; Young, Karen; Norcross, Jason; Rajulu, Sudhakar

2014-01-01

The objective of this project was to assess the performance differences between a nominally sized Extravehicular Mobility Unit (EMU) space suit and a nominal +1 (plus) sized EMU. Method: This study evaluated suit size conditions by using metabolic cost, arm mobility, and arm strength as performance metrics. Results: Differences between the suit sizes were found only in shoulder extension strength being 15.8% greater for the plus size. Discussion: While this study was able to identify motions and activities that were considered to be practically or statistically different, it does not signify that use of a plus sized suit should be prohibited. Further testing would be required that either pertained to a particular mission critical task or better simulates a microgravity environment that the EMU suit was designed to work in.

ANALYSIS OF DESIGN ELEMENTS IN SKI SUITS

Directory of Open Access Journals (Sweden)

Birsen Çileroğlu

2014-06-01

Full Text Available Popularity of Ski Sport in 19th century necessitated a new perspective on protective skiing clothing ag ainst the mountain climates and excessive cold. Winter clothing were the basis of ski attire during this period. By the beginning of 20th century lining cloth were used to minimize the wind effect. The difference between the men and women’s ski attire of the time consisted of a knee - length skirts worn over the golf trousers. Subsequent to the First World War, skiing suit models were influenced by the period uniforms and the producers reflected the fashion trends to the ski clothing. In conformance with th e prevailing trends, ski trousers were designed and produced for the women thus leading to reduction in gender differences. Increases in the ski tourism and holding of the first winter olympics in 1924 resulted in variations in ski attires, development of design characteristics, growth in user numbers, and enlargement of production capacities. Designers emphasized in their collections combined presence of elegance and practicality in the skiing attire. In 1930s, the ski suits influenced by pilots’ uniforms included characteristics permitting freedom of motion, and the design elements exhibited changes in terms of style, material and aerodynamics. In time, the ski attires showed varying design features distinguishing professionals from the amateurs. While protective functionality was primary consideration for the amateurs, for professionals the aerodynamic design was also a leading factor. Eventually, the increased differences in design characteristics were exhibited in ski suit collections, World reknown brands were formed, production and sales volumes showed significant rise. During 20th century the ski suits influenced by fashion trends to acquire unique styles reached a position of dominance to impact current fashion trends, and apart from sports attir es they became a style determinant in the clothing of cold climates. Ski suits

Strauss: Der Rosenkavalier - Suite / Michael Kennedy

Index Scriptorium Estoniae

Kennedy, Michael

1990-01-01

Uuest heliplaadist "Strauss: Der Rosenkavalier - Suite, Salome-Dance of the seven veils, Capriccio-Prelude, Intermezzo, Morgen Mittag um elf! Felicity Lott, Scottish National Orchestra, Neeme Järvi" Chandos ABRD 1397. ABTD 1397. CHAN 8758

Pheromone-modulated behavioral suites influence colony growth in the honey bee (Apis mellifera)

Science.gov (United States)

Pankiw, Tanya; Roman, Roman; Sagili, Ramesh R.; Zhu-Salzman, Keyan

2004-12-01

The success of a species depends on its ability to assess its environment and to decide accordingly which behaviors are most appropriate. Many animal species, from bacteria to mammals, are able to communicate using interspecies chemicals called pheromones. In addition to exerting physiological effects on individuals, for social species, pheromones communicate group social structure. Communication of social structure is important to social insects for the allocation of its working members into coordinated suites of behaviors. We tested effects of long-term treatment with brood pheromone on suites of honey bee brood rearing and foraging behaviors. Pheromone-treated colonies reared significantly greater brood areas and more adults than controls, while amounts of stored pollen and honey remained statistically similar. Brood pheromone increased the number of pollen foragers and the pollen load weights they returned. It appeared that the pheromone-induced increase in pollen intake was directly canalized into more brood rearing. A two-way pheromone priming effect was observed, such that some workers from the same age cohorts showed an increased and extended capacity to rear larvae, while others were recruited at significantly younger ages into pollen-specific foraging. Brood pheromone affected suites of nursing and foraging behaviors allocating worker and pollen resources associated with an important fitness trait, colony growth.

Cost and Morbidity Analysis of Chest Port Insertion: Interventional Radiology Suite Versus Operating Room.

Science.gov (United States)

LaRoy, Jennifer R; White, Sarah B; Jayakrishnan, Thejus; Dybul, Stephanie; Ungerer, Dirk; Turaga, Kiran; Patel, Parag J

2015-06-01

To compare complications and cost, from a hospital perspective, of chest port insertions performed in an interventional radiology (IR) suite versus in surgery in an operating room (OR). This study was approved by an institutional review board and is HIPAA compliant. Medical records were retrospectively searched on consecutive chest port placement procedures, in the IR suite and the OR, between October 22, 2010 and February 26, 2013, to determine patients' demographic information and chest port-related complications and/or infections. A total of 478 charts were reviewed (age range: 21-85 years; 309 women, 169 men). Univariate and bivariate analyses were performed to identify risk factors associated with an increased complication rate. Cost data on 149 consecutive Medicare outpatients (100 treated in the IR suite; 49 treated in the OR) who had isolated chest port insertions between March 2012 and February 2013 were obtained for both the operative services and pharmacy. Nonparametric tests for heterogeneity were performed using the Kruskal-Wallis method. Early complications occurred in 9.2% (22 of 239) of the IR patients versus 13.4% (32 of 239) of the OR patients. Of the 478 implanted chest ports, 9 placed in IR and 18 placed in surgery required early removal. Infections from the ports placed in IR versus the OR were 0.25 versus 0.18 infections per 1000 catheters, respectively. Overall mean costs for chest port insertion were significantly higher in the OR, for both room and pharmacy costs (P chest ports in an OR setting was almost twice that of placement in the IR suite. Hospital costs to place a chest port were significantly lower in the IR suite than in the OR, whereas radiology and surgery patients did not show a significantly different rate of complications and/or infections. Copyright © 2015 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Coupled Human-Space Suit Mobility Studies

Data.gov (United States)

National Aeronautics and Space Administration — Current EVA mobility studies only allow for comparisons of how the suit moves when actuated by a human and how the human moves when unsuited. There are now new...

Three-dimensional eddy current solution of a polyphase machine test model (abstract)

Science.gov (United States)

Pahner, Uwe; Belmans, Ronnie; Ostovic, Vlado

1994-05-01

This abstract describes a three-dimensional (3D) finite element solution of a test model that has been reported in the literature. The model is a basis for calculating the current redistribution effects in the end windings of turbogenerators. The aim of the study is to see whether the analytical results of the test model can be found using a general purpose finite element package, thus indicating that the finite element model is accurate enough to treat real end winding problems. The real end winding problems cannot be solved analytically, as the geometry is far too complicated. The model consists of a polyphase coil set, containing 44 individual coils. This set generates a two pole mmf distribution on a cylindrical surface. The rotating field causes eddy currents to flow in the inner massive and conducting rotor. In the analytical solution a perfect sinusoidal mmf distribution is put forward. The finite element model contains 85824 tetrahedra and 16451 nodes. A complex single scalar potential representation is used in the nonconducting parts. The computation time required was 3 h and 42 min. The flux plots show that the field distribution is acceptable. Furthermore, the induced currents are calculated and compared with the values found from the analytical solution. The distribution of the eddy currents is very close to the distribution of the analytical solution. The most important results are the losses, both local and global. The value of the overall losses is less than 2% away from those of the analytical solution. Also the local distribution of the losses is at any given point less than 7% away from the analytical solution. The deviations of the results are acceptable and are partially due to the fact that the sinusoidal mmf distribution was not modeled perfectly in the finite element method.

The Role of KREEP in the Production of Mg-Suite Magmas and Its Influence on the Extent of Mg-Suite Magmatism in the Lunar Crust

Science.gov (United States)

Elardo, S. M.; Shearer, C. K.; McCubbin, F. M.

2017-01-01

The lunar magnesian-suite, or Mg-suite, is a series of ancient plutonic rocks from the lunar crust. They have received a considerable amount of attention from lunar scientists since their discovery for three primary reasons: 1) their ages and geochemistry indicate they represent pristine magmatic samples that crystallized very soon after the formation of the Moon; 2) their ages often overlap with ages of the ferroan anorthosite (FAN) crust; and 3) planetary-scale processes are needed in formation models to account for their unique geochemical features. Taken as a whole, the Mg-suite samples, as magmatic cumulate rocks, approximate a fractional crystallization sequence in the low-pressure forsterite-anorthite-silica system, and thus these samples are generally thought to be derived from layered mafic intrusions which crystallized very slowly from magmas that intruded the anorthositic crust. However, no direct linkages have been established between different Mg-suite samples based either on field relationships or geochemistry.The model for the origin of the Mg-suite, which best fits the limited available data, is one where Mg-suite magmas form from melting of a hybrid cumulate package consisting of deep mantle dunite, crustal anorthosite, and KREEP (potassium-rare earth elements-phosphorus) at the base of the crust under the Procellarum KREEP Terrane (PKT). In this model, these three LMO (Lunar Magma Ocean) cumulate components are brought into close proximity by the cumulate overturn process. Deep mantle dunitic cumulates with an Mg number of approximately 90 rise to the base of the anorthositic crust due to their buoyancy relative to colder, more dense Fe- and Ti-rich cumulates. This hybridized source rock melts to form Mg-suite magmas, saturated in Mg-rich olivine and anorthitic plagioclase, that have a substantial KREEP component.

The Apollo Number: space suits, self-support, and the walk-run transition.

Directory of Open Access Journals (Sweden)

Christopher E Carr

Full Text Available BACKGROUND: How space suits affect the preferred walk-run transition is an open question with relevance to human biomechanics and planetary extravehicular activity. Walking and running energetics differ; in reduced gravity (<0.5 g, running, unlike on Earth, uses less energy per distance than walking. METHODOLOGY/PRINCIPAL FINDINGS: The walk-run transition (denoted * correlates with the Froude Number (Fr = v(2/gL, velocity v, gravitational acceleration g, leg length L. Human unsuited Fr* is relatively constant (approximately 0.5 with gravity but increases substantially with decreasing gravity below approximately 0.4 g, rising to 0.9 in 1/6 g; space suits appear to lower Fr*. Because of pressure forces, space suits partially (1 g or completely (lunar-g support their own weight. We define the Apollo Number (Ap = Fr/M as an expected invariant of locomotion under manipulations of M, the ratio of human-supported to total transported mass. We hypothesize that for lunar suited conditions Ap* but not Fr* will be near 0.9, because the Apollo Number captures the effect of space suit self-support. We used the Apollo Lunar Surface Journal and other sources to identify 38 gait events during lunar exploration for which we could determine gait type (walk/lope/run and calculate Ap. We estimated the binary transition between walk/lope (0 and run (1, yielding Fr* (0.36+/-0.11, mean+/-95% CI and Ap* (0.68+/-0.20. CONCLUSIONS/SIGNIFICANCE: The Apollo Number explains 60% of the difference between suited and unsuited Fr*, appears to capture in large part the effects of space suits on the walk-run transition, and provides several testable predictions for space suit locomotion and, of increasing relevance here on Earth, exoskeleton locomotion. The knowledge of how space suits affect gait transitions can be used to optimize space suits for use on the Moon and Mars.

Virtual reality simulation training in a high-fidelity procedure suite

DEFF Research Database (Denmark)

Lönn, Lars; Edmond, John J; Marco, Jean

2012-01-01

To assess the face and content validity of a novel, full physics, full procedural, virtual reality simulation housed in a hybrid procedure suite.......To assess the face and content validity of a novel, full physics, full procedural, virtual reality simulation housed in a hybrid procedure suite....

GPS Test Facility

Data.gov (United States)

Federal Laboratory Consortium — The Global Positioning System (GPS) Test Facility Instrumentation Suite (GPSIS) provides great flexibility in testing receivers by providing operational control of...

Exploiting Spatial Abstraction in Predictive Analytics of Vehicle Traffic

Directory of Open Access Journals (Sweden)

Natalia Andrienko

2015-04-01

Full Text Available By applying visual analytics techniques to vehicle traffic data, we found a way to visualize and study the relationships between the traffic intensity and movement speed on links of a spatially abstracted transportation network. We observed that the traffic intensities and speeds in an abstracted network are interrelated in the same way as they are in a detailed street network at the level of street segments. We developed interactive visual interfaces that support representing these interdependencies by mathematical models. To test the possibility of utilizing them for performing traffic simulations on the basis of abstracted transportation networks, we devised a prototypical simulation algorithm employing these dependency models. The algorithm is embedded in an interactive visual environment for defining traffic scenarios, running simulations, and exploring their results. Our research demonstrates a principal possibility of performing traffic simulations on the basis of spatially abstracted transportation networks using dependency models derived from real traffic data. This possibility needs to be comprehensively investigated and tested in collaboration with transportation domain specialists.

Corporation suit in administrative proceedings - BVerwG, NJW 1981, 362

International Nuclear Information System (INIS)

Skouris, W.

1982-01-01

The above mentioned decisions show that the repeated demand for an admission of the corporation suit has not had much impact on jurisdiction. Still the courts are examining whether the rights of corporations taking action against the executive measures are being infringed by them or not. They do not seem to be willing to admit the enforcement of members' rights or of public interests by means of a corporation suit except in those cases that are already embodied in the law. The latest statement of the administrative courts prove that the administrative procedural law (still) in force does not accept any general law on the conduct of a case on behalf of associations for the protection of their members' rights (egoistic corporation suit), nor does it acknowledge the legitimacy of corporations to see against objective illegalities in official decisions with the intention of reducing deficiencies in the execution (altruistic corporation suit). (orig.) [de

FRHAM-TEX trademark cool suit - OST reference No. 1854. Deactivation and decommissioning focus area

International Nuclear Information System (INIS)

1998-02-01

This paper describes a demonstration project for the FRHAM-TEX Cool Suit trademark manufactured by FRHAM Safety Products. It is a one-piece, disposable, breathable, waterproof coverall designed to permit moisture generated by the wearer to be transmitted outside the suit. The performance of this suit was compared to a Tyvek reg-sign suit as a baseline. The suit is proposed as safety ware for workers at decontamination and decommissioning projects

Extreme-Environment Silicon-Carbide (SiC) Wireless Sensor Suite

Science.gov (United States)

Yang, Jie

2015-01-01

Phase II objectives: Develop an integrated silicon-carbide wireless sensor suite capable of in situ measurements of critical characteristics of NTP engine; Compose silicon-carbide wireless sensor suite of: Extreme-environment sensors center, Dedicated high-temperature (450 deg C) silicon-carbide electronics that provide power and signal conditioning capabilities as well as radio frequency modulation and wireless data transmission capabilities center, An onboard energy harvesting system as a power source.

Astronaut Neil Armstrong in Launch Complex 16 trailer during suiting up

Science.gov (United States)

1966-01-01

Astronaut Neil A. Armstrong, command pilot of the Gemini 8 space flight, sits in the Launch Complex 16 trailer during suiting up operations for the Gemini 8 mission. Suit technician Jim Garrepy assists.

Sci-Fri AM: Quality, Safety, and Professional Issues 02: Recent work on TQC Suite and Data from a National survey on Community Uptake

Energy Technology Data Exchange (ETDEWEB)

Malkoske, Kyle; Nielsen, Michelle; Brown, Erika; Diamond, Kevin; Frenière, Normand; Grant, John; Pomerleau-Dalcourt, Natalie; Schella, Jason; Schreiner, L. John; Tantot, Laurent; Barajas, Eduardo Villareal; Sasaki, David; Milette, Marie-Pierre; Bertrand, Marie-Joëlle; Bissonnette, Jean-Pierre [Royal Victoria Hospital (Canada)

2016-08-15

The Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist’s (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) have worked together in the development of a suite of Technical Quality Control (TQC) Guidelines for radiation treatment equipment and technologies, that outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. Early community engagement and uptake survey data showed 70% of Canadian centers are part of this process and that the data in the guideline documents reflect, and are influencing the way Canadian radiation treatment centres run their technical quality control programs. As the TQC development framework matured as a cross-country initiative, guidance documents have been developed in many clinical technologies. Recently, there have been new TQC documents initiated for Gamma Knife and Cyberknife technologies where the entire communities within Canada are involved in the review process. At the same time, QARSAC reviewed the suite as a whole for the first time and it was found that some tests and tolerances overlapped across multiple documents as single tests could pertain to multiple quality control areas. The work to streamline the entire suite has allowed for improved usability of the suite while keeping the integrity of single quality control areas. The suite will be published by the JACMP, in the coming year.

Sci-Fri AM: Quality, Safety, and Professional Issues 02: Recent work on TQC Suite and Data from a National survey on Community Uptake

International Nuclear Information System (INIS)

Malkoske, Kyle; Nielsen, Michelle; Brown, Erika; Diamond, Kevin; Frenière, Normand; Grant, John; Pomerleau-Dalcourt, Natalie; Schella, Jason; Schreiner, L. John; Tantot, Laurent; Barajas, Eduardo Villareal; Sasaki, David; Milette, Marie-Pierre; Bertrand, Marie-Joëlle; Bissonnette, Jean-Pierre

2016-01-01

The Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist’s (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) have worked together in the development of a suite of Technical Quality Control (TQC) Guidelines for radiation treatment equipment and technologies, that outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. Early community engagement and uptake survey data showed 70% of Canadian centers are part of this process and that the data in the guideline documents reflect, and are influencing the way Canadian radiation treatment centres run their technical quality control programs. As the TQC development framework matured as a cross-country initiative, guidance documents have been developed in many clinical technologies. Recently, there have been new TQC documents initiated for Gamma Knife and Cyberknife technologies where the entire communities within Canada are involved in the review process. At the same time, QARSAC reviewed the suite as a whole for the first time and it was found that some tests and tolerances overlapped across multiple documents as single tests could pertain to multiple quality control areas. The work to streamline the entire suite has allowed for improved usability of the suite while keeping the integrity of single quality control areas. The suite will be published by the JACMP, in the coming year.

Heat and mass transfer in air-fed pressurised suits

International Nuclear Information System (INIS)

Tesch, K.; Collins, M.W.; Karayiannis, T.G.; Atherton, M.A.; Edwards, P.

2009-01-01

Air-fed pressurised suits are used to protect workers against contamination and hazardous environments. The specific application here is the necessity for regular clean-up maintenance within the torus chamber of fusion reactors. The current design of suiting has been developed empirically. It is, therefore, very desirable to formulate a thermo-fluids model, which will be able to define optimum designs and operating parameters. Two factors indicate that the modelling should be as comprehensive as possible. Firstly, the overall thermo-fluids problem is three-dimensional and includes mass as well as heat transfer. The fluid field is complex, bounded on one side by the human body and on the other by what may be distensible, porous and multi-layer clothing. In this paper, we report firstly the modelling necessary for the additional mass and heat transport processes. This involves the use of Fick's and Fourier's laws and conjugate heat transfer. The results of an initial validation study are presented. Temperatures at the outlet of the suits were obtained experimentally and compared with those predicted by the overall CFD model. Realistic three-dimensional geometries were used for the suit and human body. Calculations were for turbulent flow with single- and two-component (species) models

STS-74 M.S. Jerry L. Ross suits up

Science.gov (United States)

1995-01-01

Spaceflight veteran Jerry L. Ross, Mission Specialist 2 on Shuttle Mission STS-74, is assisted by a suit technician as he finishes getting into his launch/entry suit in the Operations and Checkout Building. Ross and four fellow astronauts will depart shortly for Launch Pad 39A, where the Space Shuttle Atlantis awaits a second liftoff attempt during a seven-minute window scheduled to open at approximately 7:30 a.m. EST, Nov. 12.

Seminar of the expert committee ultrasonic testing. Abstracts

International Nuclear Information System (INIS)

2017-01-01

This seminar volume contains 13 papers focusing on the following topics: 1. Test methods in the automotive sector, 2. Characterization of metallic and non-metallic materials, 3. Industrial test approaches, 4. Fiber composite materials and structures, and 5. Defect characterization using imaging techniques. One paper was separately analyzed for this database. [de

Programme and abstracts

International Nuclear Information System (INIS)

1975-01-01

Abstracts of 25 papers presented at the congress are given. The abstracts cover various topics including radiotherapy, radiopharmaceuticals, radioimmunoassay, health physics, radiation protection and nuclear medicine

2018 Congress Podium Abstracts

Science.gov (United States)

2018-02-21

Each abstract has been indexed according to first author. Abstracts appear as they were submitted and have not undergone editing or the Oncology Nursing Forum’s review process. Only abstracts that will be presented appear here. For Congress scheduling information, visit congress.ons.org or check the Congress guide. Data published in abstracts presented at the ONS 43rd Annual Congress are embargoed until the conclusion of the presentation. Coverage and/or distribution of an abstract, poster, or any of its supplemental material to or by the news media, any commercial entity, or individuals, including the authors of said abstract, is strictly prohibited until the embargo is lifted. Promotion of general topics and speakers is encouraged within these guidelines.

Learning DHTMLX suite UI

CERN Document Server

Geske, Eli

2013-01-01

A fast-paced, example-based guide to learning DHTMLX.""Learning DHTMLX Suite UI"" is for web designers who have a basic knowledge of JavaScript and who are looking for powerful tools that will give them an extra edge in their own application development. This book is also useful for experienced developers who wish to get started with DHTMLX without going through the trouble of learning its quirks through trial and error. Readers are expected to have some knowledge of JavaScript, HTML, Document Object Model, and the ability to install a local web server.

Effect of swimming suit design on the energy demands of swimming.

Science.gov (United States)

Starling, R D; Costill, D L; Trappe, T A; Jozsi, A C; Trappe, S W; Goodpaster, B H

1995-07-01

Eight competitive male swimmers completed a standardized 365.8 m (400 yd) freestyle swimming trial at a fixed pace (approximately 90% of maximal effort) while wearing a torso swim suit (TOR) or a standard racing suit (STD). Oxygen uptake (VO2), blood lactate, heart rate (HR), and distance per stroke (DPS) measurements were obtained. In addition, a video-computer system was used to collect velocity data during a prone underwater glide following a maximal leg push-off from the side of the pool while wearing the TOR and STD suits. These data were used to calculate the total distance covered during the glides. VO2 (3.76 +/- 0.16 vs 3.92 +/- 0.18 l.min-1) and lactate (8.08 +/- 0.53 vs, 9.66 +/- 0.66 mM) were significantly (P 0.05) between the TOR (170.1 +/- 5.1 b.min-1) and STD (173.5 +/- 5.7 b.min-1) trials. DPS was significantly greater during the TOR (2.70 +/- 0.066 m.stroke-1) versus STD (2.58 +/- 0.054 m.stroke-1) trial. A significantly greater total distance was covered during the prone glide while wearing the TOR (2.05 +/- 0.067 m) compared to the STD (2.00 +/- 0.080 m) suit. These findings demonstrate that a specially designed torso suit reduces the energy demand of swimming compared to a standard racing suit which may be due to a reduction in body drag.

28 CFR 36.501 - Private suits.

Science.gov (United States)

2010-07-01

... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Enforcement § 36.501 Private suits. (a) General. Any person who is... order. Upon timely application, the court may, in its discretion, permit the Attorney General to... general public importance. Upon application by the complainant and in such circumstances as the court may...

2018 Congress Poster Abstracts

Science.gov (United States)

2018-02-21

Each abstract has been indexed according to the first author. Abstracts appear as they were submitted and have not undergone editing or the Oncology Nursing Forum’s review process. Only abstracts that will be presented appear here. Poster numbers are subject to change. For updated poster numbers, visit congress.ons.org or check the Congress guide. Data published in abstracts presented at the ONS 43rd Annual Congress are embargoed until the conclusion of the presentation. Coverage and/or distribution of an abstract, poster, or any of its supplemental material to or by the news media, any commercial entity, or individuals, including the authors of said abstract, is strictly prohibited until the embargo is lifted. Promotion of general topics and speakers is encouraged within these guidelines.

Recent Enhancements in NOAA's JPSS Land Product Suite and Key Operational Applications

Science.gov (United States)

Csiszar, I. A.; Yu, Y.; Zhan, X.; Vargas, M.; Ek, M. B.; Zheng, W.; Wu, Y.; Smirnova, T. G.; Benjamin, S.; Ahmadov, R.; James, E.; Grell, G. A.

2017-12-01

A suite of operational land products has been produced as part of NOAA's Joint Polar Satellite System (JPSS) program to support a wide range of operational applications in environmental monitoring, prediction, disaster management and mitigation, and decision support. The Visible Infrared Imaging Radiometer Suite (VIIRS) on the Suomi National Polar-orbiting Partnership (NPP) and the operational JPSS satellite series forms the basis of six fundamental and multiple additional added-value environmental data records (EDRs). A major recent improvement in the land-based VIIRS EDRs has been the development of global gridded products, providing a format and science content suitable for ingest into NOAA's operational land surface and coupled numerical weather prediction models. VIIRS near-real-time Green Vegetation Fraction is now in the process of testing for full operational use, while land surface temperature and albedo are under testing and evaluation. The operational 750m VIIRS active fire product, including fire radiative power, is used to support emission modeling and air quality applications. Testing the evaluation for operational NOAA implementation of the improved 375m VIIRS active fire product is also underway. Added-value and emerging VIIRS land products include vegetation health, phenology, near-real-time surface type and surface condition change, and other biogeophysical variables. As part of the JPSS program, a global soil moisture data product has also been generated from the Advanced Microwave Scanning Radiometer 2 (AMSR2) sensor on the GCOM-W1 (Global Change Observation Mission - Water 1) satellite since July 2012. This product is included in the blended NESDIS Soil Moisture Operational Products System, providing soil moisture data as a critical input for land surface modeling.

Clementine sensor suite

Energy Technology Data Exchange (ETDEWEB)

Ledebuhr, A.G. [Lawrence Livermore National Lab., CA (United States)

1994-11-15

LLNL designed and built the suite of six miniaturized light-weight space-qualified sensors utilized in the Clementine mission. A major goal of the Clementine program was to demonstrate technologies originally developed for Ballistic Missile Defense Organization Programs. These sensors were modified to gather data from the moon. This overview presents each of these sensors and some preliminary on-orbit performance estimates. The basic subsystems of these sensors include optical baffles to reject off-axis stray light, light-weight ruggedized optical systems, filter wheel assemblies, radiation tolerant focal plane arrays, radiation hardened control and readout electronics and low mass and power mechanical cryogenic coolers for the infrared sensors. Descriptions of each sensor type are given along with design specifications, photographs and on-orbit data collected.

Measurement of Carbon Dioxide Accumulation and Physiological Function in the Launch and Entry and Advanced Crew Escape Suits

Science.gov (United States)

Bishop, Phillip; Greenisen, M. C.

1997-01-01

The Launch and Entry Suit (LES) and Advanced Crew Escape Suit (ACES) are worn by astronauts for launch and entry. Previous work by Waligora, et al., 1992, Waligora and Gilbert, 1992, and Dalrymple 1996, have found that carbon dioxide (CO2) accumulation in the LES/ACES helmet may be problematic. CO2 accumulation is important because high inspired levels of CO2 reduce physical function and pose a safety hazard (e.g. levels of CO2 accumulation of 3.6% in the Extravehicular Mobility Unit are sufficient to terminate Extra Vehicular Activities). My task was to design a suitable test protocol for determining the important physiological aspects of LES/ACES use. Three basic issues arose. First was the determination of the astronaut's CO2 inspiration during visor-down use at rest and during walking at 3.5 mph. A sub-issue was the impact of a pneumotach on CO2 since it has been previously observed that when the Aerosport pneumotach was used, performance seemed improved, which might be attributable to a lowered respiration rate when using the pneumotach. The second issue was the energy costs of waLking in the LES/ACES with various G-suit inflation levels, since G-suit inflation increases metabolic costs and metabolic costs influence the C02 production in the LES/ACES helmet. Since G-suit inflation improves orthostatic tolerance after space flight, but likely increases the energy costs of walking, the balance between G-suit inflation and C02 accumulation is an important safety consideration. The third issue which arose from pilot work was the substantial reduction in physical function after a 10 min visor-down period prior to walk.

Development of Abstract Grammatical Categorization in Infants

Science.gov (United States)

Cyr, Marilyn; Shi, Rushen

2013-01-01

This study examined abstract syntactic categorization in infants, using the case of grammatical gender. Ninety-six French-learning 14-, 17-, 20-, and 30-month-olds completed the study. In a preferential looking procedure infants were tested on their generalized knowledge of grammatical gender involving pseudonouns and gender-marking determiners.…

DEMON/ANGEL - A SUITE OF PROGRAMS TO CARRY OUT DENSITY MODIFICATION

NARCIS (Netherlands)

VELLIEUX, FMDAP; HUNT, JF; ROY, S; READ, RJ

1995-01-01

The DEMON/ANGEL suite of computer programs has been developed to carry out density modification by non-crystallographic symmetry-averaging, solvent-flattening and histogram-mapping techniques. This suite consists of programs that allow molecular envelopes to be defined and modified,

Extending and Enhancing SAS (Static Analysis Suite)

CERN Document Server

Ho, David

2016-01-01

The Static Analysis Suite (SAS) is an open-source software package used to perform static analysis on C and C++ code, helping to ensure safety, readability and maintainability. In this Summer Student project, SAS was enhanced to improve ease of use and user customisation. A straightforward method of integrating static analysis into a project at compilation time was provided using the automated build tool CMake. The process of adding checkers to the suite was streamlined and simplied by developing an automatic code generator. To make SAS more suitable for continuous integration, a reporting mechanism summarising results was added. This suitability has been demonstrated by inclusion of SAS in the Future Circular Collider Software nightly build system. Scalability of the improved package was demonstrated by using the tool to analyse the ROOT code base.

Statistical Evaluation of Causal Factors Associated with Astronaut Shoulder Injury in Space Suits.

Science.gov (United States)

Anderson, Allison P; Newman, Dava J; Welsch, Roy E

2015-07-01

Shoulder injuries due to working inside the space suit are some of the most serious and debilitating injuries astronauts encounter. Space suit injuries occur primarily in the Neutral Buoyancy Laboratory (NBL) underwater training facility due to accumulated musculoskeletal stress. We quantitatively explored the underlying causal mechanisms of injury. Logistic regression was used to identify relevant space suit components, training environment variables, and anthropometric dimensions related to an increased propensity for space-suited injury. Two groups of subjects were analyzed: those whose reported shoulder incident is attributable to the NBL or working in the space suit, and those whose shoulder incidence began in active duty, meaning working in the suit could be a contributing factor. For both groups, percent of training performed in the space suit planar hard upper torso (HUT) was the most important predictor variable for injury. Frequency of training and recovery between training were also significant metrics. The most relevant anthropometric dimensions were bideltoid breadth, expanded chest depth, and shoulder circumference. Finally, record of previous injury was found to be a relevant predictor for subsequent injury. The first statistical model correctly identifies 39% of injured subjects, while the second model correctly identifies 68% of injured subjects. A review of the literature suggests this is the first work to quantitatively evaluate the hypothesized causal mechanisms of all space-suited shoulder injuries. Although limited in predictive capability, each of the identified variables can be monitored and modified operationally to reduce future impacts on an astronaut's health.

A Method for and Issues Associated with the Determination of Space Suit Joint Requirements

Science.gov (United States)

Matty, Jennifer E.; Aitchison, Lindsay

2009-01-01

In the design of a new space suit it is necessary to have requirements that define what mobility space suit joints should be capable of achieving in both a system and at the component level. NASA elected to divide mobility into its constituent parts-range of motion (ROM) and torque- in an effort to develop clean design requirements that limit subject performance bias and are easily verified. Unfortunately, the measurement of mobility can be difficult to obtain. Current technologies, such as the Vicon motion capture system, allow for the relatively easy benchmarking of range of motion (ROM) for a wide array of space suit systems. The ROM evaluations require subjects in the suit to accurately evaluate the ranges humans can achieve in the suit. However, when it comes to torque, there are significant challenges for both benchmarking current performance and writing requirements for future suits. This is reflected in the fact that torque definitions have been applied to very few types of space suits and with limited success in defining all the joints accurately. This paper discussed the advantages and disadvantages to historical joint torque evaluation methods, describes more recent efforts directed at benchmarking joint torques of prototype space suits, and provides an outline for how NASA intends to address joint torque in design requirements for the Constellation Space Suit System (CSSS).

STS-76 Payload Cmdr Ronald Sega suits up

Science.gov (United States)

1996-01-01

STS-76 Payload Commander Ronald M. Sega is donning his launch/entry suit in the Operations and Checkout Building with assistance from a suit technician. The third docking between the Russian Space Station Mir and the U.S. Space Shuttle marks the second trip into space for Sega, who recently served a five-month assignment in Russia as operations director for NASA activities there. Once suitup activities are completed the six-member STS-76 flight crew will depart for Launch Pad 39B, where the Space Shuttle Atlantis is undergoing final preparations for liftoff during an approximately seven-minute launch window opening around 3:13 a.m. EST, March 22.

What's New with MS Office Suites

Science.gov (United States)

Goldsborough, Reid

2012-01-01

If one buys a new PC, laptop, or netbook computer today, it probably comes preloaded with Microsoft Office 2010 Starter Edition. This is a significantly limited, advertising-laden version of Microsoft's suite of productivity programs, Microsoft Office. This continues the trend of PC makers providing ever more crippled versions of Microsoft's…

Antigravity Suits For Studies Of Weightlessness

Science.gov (United States)

Kravik, Stein E.; Greenleaf, John

1992-01-01

Report presents results of research on use of "antigravity" suit, one applying positive pressure to lower body to simulate some effects of microgravity. Research suggests lower-body positive pressure is alternative to bed rest or immersion in water in terrestrial studies of cardioregulatory, renal, electrolyte, and hormonal changes induced in humans by microgravity.

Representations of abstract grammatical feature agreement in young children.

Science.gov (United States)

Melançon, Andréane; Shi, Rushen

2015-11-01

A fundamental question in language acquisition research is whether young children have abstract grammatical representations. We tested this question experimentally. French-learning 30-month-olds were first taught novel word-object pairs in the context of a gender-marked determiner (e.g., un MASC ravole 'a ravole'). Test trials presented the objects side-by-side while one of them was named in new phrases containing other determiners and an adjective (e.g., le MASC joli ravole MASC 'the pretty ravole'). The gender agreement between the new determiner and the non-adjacent noun was manipulated in different test trials (e.g., le MASC __ravole MASC; *la FEM __ravole MASC). We found that online comprehension of the named target was facilitated in gender-matched trials but impeded in gender-mismatched trials. That is, children assigned the determiner genders to the novel nouns during word learning. They then processed the non-adjacent gender agreement between the two categories (Det, Noun) during test. The results demonstrate abstract featural representation and grammatical productivity in young children.

STS-95 Mission Specialist Duque suits up during TCDT

Science.gov (United States)

1998-01-01

STS-95 Mission Specialist Pedro Duque of Spain, representing the European Space Agency, suits up in the Operations and Checkout Building prior to his trip to Launch Pad 39-B. Duque and the rest of the STS-95 crew are at KSC to participate in the Terminal Countdown Demonstration Test (TCDT) which includes mission familiarization activities, emergency egress training, and a simulated main engine cutoff. The other crew members are Payload Specialist Chiaki Mukai (M.D., Ph.D.), representing the National Space Development Agency of Japan (NASDA), Pilot Steven W. Lindsey, Mission Specialist Scott E. Parazynski, Mission Specialist Stephen K. Robinson, Payload Specialist John H. Glenn Jr., senator from Ohio, and Mission Commander Curtis L. Brown. The STS-95 mission, targeted for liftoff on Oct. 29, includes research payloads such as the Spartan solar-observing deployable spacecraft, the Hubble Space Telescope Orbital Systems Test Platform, the International Extreme Ultraviolet Hitchhiker, as well as the SPACEHAB single module with experiments on space flight and the aging process. Following the TCDT, the crew will be returning to Houston for final flight preparations.

33 CFR 144.20-5 - Exposure suits.

Science.gov (United States)

2010-07-01

... light that is approved under 46 CFR 161.012. Each light must be securely attached to the front shoulder... lanyard coiled and stopped off. (f) No stowage container for exposure suits may be capable of being locked...

Sierra/SolidMechanics 4.48 Verification Tests Manual.

Energy Technology Data Exchange (ETDEWEB)

Plews, Julia A.; Crane, Nathan K; de Frias, Gabriel Jose; Le, San; Littlewood, David John; Merewether, Mark Thomas; Mosby, Matthew David; Pierson, Kendall H.; Porter, Vicki L.; Shelton, Timothy; Thomas, Jesse David; Tupek, Michael R.; Veilleux, Michael; Xavier, Patrick G.

2018-03-01

Presented in this document is a small portion of the tests that exist in the Sierra / SolidMechanics (Sierra / SM) verification test suite. Most of these tests are run nightly with the Sierra / SM code suite, and the results of the test are checked versus the correct analytical result. For each of the tests presented in this document, the test setup, a description of the analytic solution, and comparison of the Sierra / SM code results to the analytic solution is provided. Mesh convergence is also checked on a nightly basis for several of these tests. This document can be used to confirm that a given code capability is verified or referenced as a compilation of example problems. Additional example problems are provided in the Sierra / SM Example Problems Manual. Note, many other verification tests exist in the Sierra / SM test suite, but have not yet been included in this manual.

Program and abstracts

Energy Technology Data Exchange (ETDEWEB)

1975-01-01

Abstracts of the papers given at the conference are presented. The abstracts are arranged under sessions entitled:Theoretical Physics; Nuclear Physics; Solid State Physics; Spectroscopy; Physics Education; SANCGASS; Astronomy; Plasma Physics; Physics in Industry; Applied and General Physics.

Program and abstracts

International Nuclear Information System (INIS)

1975-01-01

Abstracts of the papers given at the conference are presented. The abstracts are arranged under sessions entitled:Theoretical Physics; Nuclear Physics; Solid State Physics; Spectroscopy; Physics Education; SANCGASS; Astronomy; Plasma Physics; Physics in Industry; Applied and General Physics

Evaluation of Triathlon Suit Characteristics Relevant to Thermophysiology of an Athlete

Directory of Open Access Journals (Sweden)

Chris Watson

2018-02-01

Full Text Available The thermophysiological function of clothing influences athletic wellbeing and performance, particularly in outdoor endurance activities such as triathlon. However, there is very little existing research on the performance of triathlon suits relative to thermophysiological function of the wearer. This pilot study provides a benchmark for triathlon suit performance and insights into improving the suit design and material engineering. The study assessed the thermal and breathability attributes of 6 triathlon suits and concluded that while both of the attributes were similar overall, they varied in different body zones due to different design, construction and materials. Local thermal and evaporative performance were affected by fabric construction; double fabric layering in the stomach panel; the number, size, shape and material structure of rear pockets; cycle crotch pad size, shape and thickness; and panel design. The results of this study show the importance of garment design, construction and materials for the best thermal and evaporative resistance attributes of sportswear.

STS-82 Pilot Scott J. 'Doc' Horowitz Suit Up

Science.gov (United States)

1997-01-01

STS-82 Pilot Scott J. 'Doc' Horowitz puts on a glove of his launch and entry suit with assistance from a suit technician in the Operations and Checkout Building. This is Horowitz''';s second space flight. He and the six other crew members will depart shortly for Launch Pad 39A, where the Space Shuttle Discovery awaits liftoff on a 10-day mission to service the orbiting Hubble Space Telescope (HST). This will be the second HST servicing mission. Four back-to-back spacewalks are planned.

Surgical Space Suits Increase Particle and Microbiological Emission Rates in a Simulated Surgical Environment.

Science.gov (United States)

Vijaysegaran, Praveen; Knibbs, Luke D; Morawska, Lidia; Crawford, Ross W

2018-05-01

The role of space suits in the prevention of orthopedic prosthetic joint infection remains unclear. Recent evidence suggests that space suits may in fact contribute to increased infection rates, with bioaerosol emissions from space suits identified as a potential cause. This study aimed to compare the particle and microbiological emission rates (PER and MER) of space suits and standard surgical clothing. A comparison of emission rates between space suits and standard surgical clothing was performed in a simulated surgical environment during 5 separate experiments. Particle counts were analyzed with 2 separate particle counters capable of detecting particles between 0.1 and 20 μm. An Andersen impactor was used to sample bacteria, with culture counts performed at 24 and 48 hours. Four experiments consistently showed statistically significant increases in both PER and MER when space suits are used compared with standard surgical clothing. One experiment showed inconsistent results, with a trend toward increases in both PER and MER when space suits are used compared with standard surgical clothing. Space suits cause increased PER and MER compared with standard surgical clothing. This finding provides mechanistic evidence to support the increased prosthetic joint infection rates observed in clinical studies. Copyright © 2017 Elsevier Inc. All rights reserved.

Program and abstracts

International Nuclear Information System (INIS)

1976-01-01

Abstracts of the papers given at the conference are presented. The abstracts are arranged under sessions entitled: Theoretical Physics; Nuclear Physics; Solid State Physics; Spectroscopy; Plasma Physics; Solar-Terrestrial Physics; Astrophysics and Astronomy; Radioastronomy; General Physics; Applied Physics; Industrial Physics

Introduction to abstract algebra

CERN Document Server

Nicholson, W Keith

2012-01-01

Praise for the Third Edition ". . . an expository masterpiece of the highest didactic value that has gained additional attractivity through the various improvements . . ."-Zentralblatt MATH The Fourth Edition of Introduction to Abstract Algebra continues to provide an accessible approach to the basic structures of abstract algebra: groups, rings, and fields. The book's unique presentation helps readers advance to abstract theory by presenting concrete examples of induction, number theory, integers modulo n, and permutations before the abstract structures are defined. Readers can immediately be

Weightless environment simulation test; Mujuryo simulation shiken

Energy Technology Data Exchange (ETDEWEB)

Kobayashi, K.; Yamamoto, T.; Kato, F. [Kawasaki Heavy Industries, Ltd., Kobe (Japan)

1997-07-20

Kawasaki Heavy Industries, Ltd., delivered a Weightless Environment Test System (WETS) to National Space Development Agency of Japan in 1994. This system creates a weightless environment similar to that in space by balancing gravity and buoyancy in the water, and is constituted of a large water tank, facilities to supply air and cooling water to space suits worn in the water, etc. In this report, a weightless environment simulation test and the facilities to supply air and cooling water are described. In the weightless environment simulation test, the astronaut to undergo tests and training wears a space suit quite similar to the suit worn on the orbit, and performs EVA/IVA (extravehicular activities/intravehicular activities) around a JEM (Japanese Experimental Module) mockup installed in the water verifying JEM design specifications, preparing manuals for operations on the orbit, or receives basic space-related drill and training. An EVA weightless environment simulation test No. 3 was accomplished with success in January, 1997, when the supply of breathing water and cooling water to the space suit, etc., were carried out with safety and reliability. 2 refs., 8 figs., 2 tabs.

Abstracting Concepts and Methods.

Science.gov (United States)

Borko, Harold; Bernier, Charles L.

This text provides a complete discussion of abstracts--their history, production, organization, publication--and of indexing. Instructions for abstracting are outlined, and standards and criteria for abstracting are stated. Management, automation, and personnel are discussed in terms of possible economies that can be derived from the introduction…

The European space suit, a design for productivity and crew safety

Science.gov (United States)

Skoog, A. Ingemar; Berthier, S.; Ollivier, Y.

In order to fulfil the two major mission objectives, i.e. support planned and unplanned external servicing of the COLUMBUS FFL and support the HERMES vehicle for safety critical operations and emergencies, the European Space Suit System baseline configuration incorporates a number of design features, which shall enhance the productivity and the crew safety of EVA astronauts. The work in EVA is today - and will be for several years - a manual work. Consequently, to improve productivity, the first challenge is to design a suit enclosure which minimizes movement restrictions and crew fatigue. It is covered by the "ergonomic" aspect of the suit design. Furthermore, it is also necessary to help the EVA crewmember in his work, by giving him the right information at the right time. Many solutions exist in this field of Man-Machine Interface, from a very simple system, based on cuff check lists, up to advanced systems, including Head-Up Displays. The design concept for improved productivity encompasses following features: • easy donning/doffing thru rear entry, • suit ergonomy optimisation, • display of operational information in alpha-numerical and graphical from, and • voice processing for operations and safety critical information. Concerning crew safety the major design features are: • a lower R-factor for emergency EVA operations thru incressed suit pressure, • zero prebreath conditions for normal operations, • visual and voice processing of all safety critical functions, and • an autonomous life support system to permit unrestricted operations around HERMES and the CFFL. The paper analyses crew safety and productivity criteria and describes how these features are being built into the design of the European Space Suit System.

33 CFR 150.518 - What are the inspection requirements for work vests and immersion suits?

Science.gov (United States)

2010-07-01

... requirements for work vests and immersion suits? 150.518 Section 150.518 Navigation and Navigable Waters COAST... vests and immersion suits? (a) All work vests and immersion suits must be inspected by the owner or... a work vest or immersion suit is inspected and is in serviceable condition, then it may remain in...

Automated integration of lidar into the LANDFIRE product suite

Science.gov (United States)

Peterson, Birgit; Nelson, Kurtis; Seielstad, Carl; Stoker, Jason M.; Jolly, W. Matt; Parsons, Russell

2015-01-01

Accurate information about three-dimensional canopy structure and wildland fuel across the landscape is necessary for fire behaviour modelling system predictions. Remotely sensed data are invaluable for assessing these canopy characteristics over large areas; lidar data, in particular, are uniquely suited for quantifying three-dimensional canopy structure. Although lidar data are increasingly available, they have rarely been applied to wildland fuels mapping efforts, mostly due to two issues. First, the Landscape Fire and Resource Planning Tools (LANDFIRE) program, which has become the default source of large-scale fire behaviour modelling inputs for the US, does not currently incorporate lidar data into the vegetation and fuel mapping process because spatially continuous lidar data are not available at the national scale. Second, while lidar data are available for many land management units across the US, these data are underutilized for fire behaviour applications. This is partly due to a lack of local personnel trained to process and analyse lidar data. This investigation addresses these issues by developing the Creating Hybrid Structure from LANDFIRE/lidar Combinations (CHISLIC) tool. CHISLIC allows individuals to automatically generate a suite of vegetation structure and wildland fuel parameters from lidar data and infuse them into existing LANDFIRE data sets. CHISLIC will become available for wider distribution to the public through a partnership with the U.S. Forest Service’s Wildland Fire Assessment System (WFAS) and may be incorporated into the Wildland Fire Decision Support System (WFDSS) with additional design and testing. WFAS and WFDSS are the primary systems used to support tactical and strategic wildland fire management decisions.

FusionCharts Beginner's Guide The Official Guide for FusionCharts Suite

CERN Document Server

Nadhani, Sanket; Bhattacharya, Shamasis

2012-01-01

The book is written as a practical, step-by-step guide to using FusionCharts Suite. The book not only teaches you the fundamentals and implementation of FusionCharts Suite, but also makes you the data visualization guru among your friends and colleagues by teaching how to select the right chart type and usability tips. Filled with examples, code samples and practical tips in a no-nonsense way, the book is a breeze to read.This book is both for beginners and advanced web developers who need to create interactive charts for their web applications. No previous knowledge of FusionCharts Suite is a

Prokofiev. "Romeo and Juliet" - Suites / Iran March

Index Scriptorium Estoniae

March, Iran

1991-01-01

Uuest heliplaadist "Prokofiev. "Romeo and Juliet" - Suites: N 1 Op. 64 bis a; N 2 Op. 64 ter b; N 3 Op. 101 c. Royal Scottish National Orchestra /Neeme Järvi" Chandos cassette ABTD 1536; CD CHAN 8940 (78 minutes) etc

Challenging Racism in Brazil. Legal Suits in the Context of the 1951 Anti-Discrimination Law

Directory of Open Access Journals (Sweden)

Jerry Dávila

Full Text Available Abstract This article examines efforts to define the nature of racial discrimination in Brazil, within an environment shaped by perceptions of the meaning of racism in the United States and perceptions about the nature of race relations in the lusophone world. The article asks how did black Brazilians work to define discrimination, and what opportunities did they find to mount challenges? This study elucidates reactions to discrimination, looking for these acts where they occurred rather than where the U.S. experience tells us to find them, exploring efforts to define discrimination and to create means to challenge it. Though these efforts often dialogued with ever-present perceptions about race in the U.S., they were adapted to particular legal, political, social and cultural circumstances in the Brazil of their time. In particular, I examine challenges to discrimination through criminal suits brought under Brazil's 1951 anti-discrimination law.

Completeness of Lyapunov Abstraction

Directory of Open Access Journals (Sweden)

Rafael Wisniewski

2013-08-01

Full Text Available In this work, we continue our study on discrete abstractions of dynamical systems. To this end, we use a family of partitioning functions to generate an abstraction. The intersection of sub-level sets of the partitioning functions defines cells, which are regarded as discrete objects. The union of cells makes up the state space of the dynamical systems. Our construction gives rise to a combinatorial object - a timed automaton. We examine sound and complete abstractions. An abstraction is said to be sound when the flow of the time automata covers the flow lines of the dynamical systems. If the dynamics of the dynamical system and the time automaton are equivalent, the abstraction is complete. The commonly accepted paradigm for partitioning functions is that they ought to be transversal to the studied vector field. We show that there is no complete partitioning with transversal functions, even for particular dynamical systems whose critical sets are isolated critical points. Therefore, we allow the directional derivative along the vector field to be non-positive in this work. This considerably complicates the abstraction technique. For understanding dynamical systems, it is vital to study stable and unstable manifolds and their intersections. These objects appear naturally in this work. Indeed, we show that for an abstraction to be complete, the set of critical points of an abstraction function shall contain either the stable or unstable manifold of the dynamical system.

An introduction to abstract algebra

CERN Document Server

Robinson, Derek JS

2003-01-01

This is a high level introduction to abstract algebra which is aimed at readers whose interests lie in mathematics and in the information and physical sciences. In addition to introducing the main concepts of modern algebra, the book contains numerous applications, which are intended to illustrate the concepts and to convince the reader of the utility and relevance of algebra today. In particular applications to Polya coloring theory, latin squares, Steiner systems and error correcting codes are described. Another feature of the book is that group theory and ring theory are carried further than is often done at this level. There is ample material here for a two semester course in abstract algebra. The importance of proof is stressed and rigorous proofs of almost all results are given. But care has been taken to lead the reader through the proofs by gentle stages. There are nearly 400 problems, of varying degrees of difficulty, to test the reader''s skill and progress. The book should be suitable for students ...

Modular, High-Volume Fuel Cell Leak-Test Suite and Process

Energy Technology Data Exchange (ETDEWEB)

Ru Chen; Ian Kaye

2012-03-12

Fuel cell stacks are typically hand-assembled and tested. As a result the manufacturing process is labor-intensive and time-consuming. The fluid leakage in fuel cell stacks may reduce fuel cell performance, damage fuel cell stack, or even cause fire and become a safety hazard. Leak check is a critical step in the fuel cell stack manufacturing. The fuel cell industry is in need of fuel cell leak-test processes and equipment that is automatic, robust, and high throughput. The equipment should reduce fuel cell manufacturing cost.

A Parametric Model of Shoulder Articulation for Virtual Assessment of Space Suit Fit

Science.gov (United States)

Kim, K. Han; Young, Karen S.; Bernal, Yaritza; Boppana, Abhishektha; Vu, Linh Q.; Benson, Elizabeth A.; Jarvis, Sarah; Rajulu, Sudhakar L.

2016-01-01

Suboptimal suit fit is a known risk factor for crewmember shoulder injury. Suit fit assessment is however prohibitively time consuming and cannot be generalized across wide variations of body shapes and poses. In this work, we have developed a new design tool based on the statistical analysis of body shape scans. This tool is aimed at predicting the skin deformation and shape variations for any body size and shoulder pose for a target population. This new process, when incorporated with CAD software, will enable virtual suit fit assessments, predictively quantifying the contact volume, and clearance between the suit and body surface at reduced time and cost.

Abstracts and abstracting a genre and set of skills for the twenty-first century

CERN Document Server

Koltay, Tibor

2010-01-01

Despite their changing role, abstracts remain useful in the digital world. Highly beneficial to information professionals and researchers who work and publish in different fields, this book summarizes the most important and up-to-date theory of abstracting, as well as giving advice and examples for the practice of writing different kinds of abstracts. The book discusses the length, the functions and basic structure of abstracts, outlining a new approach to informative and indicative abstracts. The abstractors' personality, their linguistic and non-linguistic knowledge and skills are also discu

Enhancements to the opera-3d suite

International Nuclear Information System (INIS)

Riley, C.P.

1997-01-01

The OPERA-3D suite of programs has been enhanced to include 2 additional 3 dimensional finite element based solvers, with complimentary features in the pre- and postprocessing. SOPRANO computes electromagnetic fields at high frequency including displacement current effects. It has 2 modules emdash a deterministic solution at a user defined frequency and an eigenvalue solution for modal analysis. It is suitable for designing microwave structures and cavities found in particle accelerators. SCALA computes electrostatic fields in the presence of space charge from charged particle beams. The user may define the emission characteristics of electrodes or plasma surfaces and compute the resultant space charge limited beams, including the presence of magnetic fields. Typical applications in particle accelerators are electron guns and ion sources. Other enhancements to the suite include additional capabilities in TOSCA and ELEKTRA, the static and dynamic solvers. copyright 1997 American Institute of Physics

The Sample Analysis at Mars Investigation and Instrument Suite

Science.gov (United States)

Mahaffy, Paul; Webster, Christopher R.; Conrad, Pamela G.; Arvey, Robert; Bleacher, Lora; Brinckerhoff, William B.; Eigenbrode, Jennifer L.; Chalmers, Robert A.; Dworkin, Jason P.; Errigo, Therese;

Z-2 Space Suit: A Case Study in Human Spaceflight Public Outreach

Science.gov (United States)

McFarland, Shane M.

2016-01-01

NASA Johnson Space Center's Z-series of planetary space suit prototypes is an iterative development platform with a Mars-forward design philosophy, targeting a Mars surface mission in the mid-2030s. The first space suit assembly, called the Z-1, was delivered in 2012. While meeting the project's stated requirements and objectives, the general public's reception primarily focused on the color scheme, which vaguely invoked similarity to a certain animated cartoon character. The public at large has and continues to be exposed to varying space suit design aesthetics from popular culture and low TRL technology maturation efforts such as mechanical counterpressure. The lesson learned was that while the design aesthetic is not important from an engineering perspective, the perception of the public is important for NASA and human spaceflight in general. For the Z-2 space suit, an integrated public outreach strategy was employed to engage, excite and educate the public on the current technology of space suits and NASA's plans moving forward. The keystone of this strategy was a public vote on three different suit cover layer aesthetics, the winner of which would be used as inspiration in fabrication. Other components included social media, university collaboration, and select media appearances, the cumulative result of which, while intangible in its benefit, was ultimately a positive effect in terms of the image of NASA as well as the dissemination of information vital to dispelling public misconceptions.

Simplified Abrasion Test Methodology for Candidate EVA Glove Lay-Ups

Science.gov (United States)

Rabel, Emily; Aitchison, Lindsay

2015-01-01

During the Apollo Program, space suit outer-layer fabrics were badly abraded after performing just a few extravehicular activities (EVAs). For example, the Apollo 12 commander reported abrasive wear on the boots that penetrated the outer-layer fabric into the thermal protection layers after less than 8 hrs of surface operations. Current plans for the exploration planetary space suits require the space suits to support hundreds of hours of EVA on a lunar or Martian surface, creating a challenge for space suit designers to utilize materials advances made over the last 40 years and improve on the space suit fabrics used in the Apollo Program. Over the past 25 years the NASA Johnson Space Center Crew and Thermal Systems Division has focused on tumble testing as means of simulating wear on the outer layer of the space suit fabric. Most recently, in 2009, testing was performed on 4 different candidate outer layers to gather baseline data for future use in design of planetary space suit outer layers. In support of the High Performance EVA Glove Element of the Next Generation Life Support Project, testing a new configuration was recently attempted in which require 10% of the fabric per replicate of that need in 2009. The smaller fabric samples allowed for reduced per sample cost and flexibility to test small samples from manufacturers without the overhead to have a production run completed. Data collected from this iteration was compared to that taken in 2009 to validate the new test method. In addition the method also evaluated the fabrics and fabric layups used in a prototype thermal micrometeoroid garment (TMG) developed for EVA gloves under the NASA High Performance EVA Glove Project. This paper provides a review of previous abrasion studies on space suit fabrics, details methodologies used for abrasion testing in this particular study, results of the validation study, and results of the TMG testing.

Truthful Monadic Abstractions

DEFF Research Database (Denmark)

Brock-Nannestad, Taus; Schürmann, Carsten

2012-01-01

indefinitely, finding neither a proof nor a disproof of a given subgoal. In this paper we characterize a family of truth-preserving abstractions from intuitionistic first-order logic to the monadic fragment of classical first-order logic. Because they are truthful, these abstractions can be used to disprove...

Tackling action-based video abstraction of animated movies for video browsing

Science.gov (United States)

Ionescu, Bogdan; Ott, Laurent; Lambert, Patrick; Coquin, Didier; Pacureanu, Alexandra; Buzuloiu, Vasile

2010-07-01

We address the issue of producing automatic video abstracts in the context of the video indexing of animated movies. For a quick browse of a movie's visual content, we propose a storyboard-like summary, which follows the movie's events by retaining one key frame for each specific scene. To capture the shot's visual activity, we use histograms of cumulative interframe distances, and the key frames are selected according to the distribution of the histogram's modes. For a preview of the movie's exciting action parts, we propose a trailer-like video highlight, whose aim is to show only the most interesting parts of the movie. Our method is based on a relatively standard approach, i.e., highlighting action through the analysis of the movie's rhythm and visual activity information. To suit every type of movie content, including predominantly static movies or movies without exciting parts, the concept of action depends on the movie's average rhythm. The efficiency of our approach is confirmed through several end-user studies.

Abstracts and papers of the 1997 International RERTR Meeting

International Nuclear Information System (INIS)

1997-10-01

The 1997 International Meeting on Reduced Enrichment for Research and Test Reactors (RERTR) was sponsored by the Argonne National Laboratory and was held in Jackson Hole, Wyoming, U.S.A. on 5-10 October 1997. The abstracts and available papers that were presented at this meeting are dealing with: National RERTR Programs; Fuel Development, Testing and Evaluation; Safety Tests and Evaluations; Core Conversion Studies; New LEU Reactors; Mo-99 Production From LEU Fission; Spent Fuel Management; Fuel Cycle issues

The use of antigravity suits in the treatment of idiopathic orthostatic hypotension

Science.gov (United States)

Landmark, K.; Kravik, S.

1980-01-01

Idiopathic orthostatic hypotension is an uncommon disease characterized by a drop in blood pressure when going from a recumbent to a standing position. Treatment by medication generally produces poor results. Three patients at the Royal Hospital in Oslo were treated with antigravity suits and all were able to maintain adequate blood pressures in the standing position. One patient improved dramatically and was able to take short walks while wearing the suit. The two other patients, however, felt that wearing the suits eventually became uncomfortable. This treatment represents a useful treatment alternative for intractable cases.

Comprehension of concrete and abstract words in semantic dementia

Science.gov (United States)

Jefferies, Elizabeth; Patterson, Karalyn; Jones, Roy W.; Lambon Ralph, Matthew A.

2009-01-01

The vast majority of brain-injured patients with semantic impairment have better comprehension of concrete than abstract words. In contrast, several patients with semantic dementia (SD), who show circumscribed atrophy of the anterior temporal lobes bilaterally, have been reported to show reverse imageability effects, i.e., relative preservation of abstract knowledge. Although these reports largely concern individual patients, some researchers have recently proposed that superior comprehension of abstract concepts is a characteristic feature of SD. This would imply that the anterior temporal lobes are particularly crucial for processing sensory aspects of semantic knowledge, which are associated with concrete not abstract concepts. However, functional neuroimaging studies of healthy participants do not unequivocally predict reverse imageability effects in SD because the temporal poles sometimes show greater activation for more abstract concepts. We examined a case-series of eleven SD patients on a synonym judgement test that orthogonally varied the frequency and imageability of the items. All patients had higher success rates for more imageable as well as more frequent words, suggesting that (a) the anterior temporal lobes underpin semantic knowledge for both concrete and abstract concepts, (b) more imageable items – perhaps due to their richer multimodal representations – are typically more robust in the face of global semantic degradation and (c) reverse imageability effects are not a characteristic feature of SD. PMID:19586212

A transitional alkalic dolerite dike suite of Mesozoic age in Southeastern New England

Science.gov (United States)

Hermes, O. Don; Rao, J. M.; Dickenson, M. P.; Pierce, T. A.

1984-12-01

Dike rocks from the New England platform of Rhode Island and adjacent Massachusetts consist of premetamorphic and post-metamorphic suites. The older group includes metamorphosed dolerite, minette, and schistose dioritic rocks. Post-metamorphic dikes consist of dolerite and sparse monchiquite. The post-metamorphic dolerites are of comparable age to the Eastern North American dolerite suite associated with the Mesozoic basins along the eastern seaboard of North America. However, the southeastern New England dolerites exhibit mineralogy and chemistry more typical of a transitional alkalic suite compared to the more subalkalic tholeiitic dolerites of the Eastern North American suite. Both suites are compatible with a rift tectonic setting, but the more alkalic dolerites may represent a deeper source of small volume melts compared to the Eastern North American dolerites. These more alkaline melts may have concentrated at local centers, or they may be typical of flank dolerites as opposed to the less alkalic varieties that occur within the central axial rift.

Compression under a mechanical counter pressure space suit glove

Science.gov (United States)

Waldie, James M A.; Tanaka, Kunihiko; Tourbier, Dietmar; Webb, Paul; Jarvis, Christine W.; Hargens, Alan R.

2002-01-01

Background: Current gas-pressurized space suits are bulky stiff shells severely limiting astronaut function and capability. A mechanical counter pressure (MCP) space suit in the form of a tight elastic garment could dramatically improve extravehicular activity (EVA) dexterity, but also be advantageous in safety, cost, mass and volume. The purpose of this study was to verify that a prototype MCP glove exerts the design compression of 200 mmHg, a pressure similar to the current NASA EVA suit. Methods: Seven male subjects donned a pressure measurement array and MCP glove on the right hand, which was placed into a partial vacuum chamber. Average compression was recorded on the palm, the bottom of the middle finger, the top of the middle finger and the dorsum of the hand at pressures of 760 (ambient), 660 and 580 mmHg. The vacuum chamber was used to simulate the pressure difference between the low breathing pressure of the current NASA space suits (approximately 200 mmHg) and an unprotected hand in space. Results: At ambient conditions, the MCP glove compressed the dorsum of the hand at 203.5 +/- 22.7 mmHg, the bottom of the middle finger at 179.4 +/- 16.0 mmHg, and the top of the middle finger at 183.8 +/- 22.6 mmHg. The palm compression was significantly lower (59.6 +/- 18.8 mmHg, pglove compression with the chamber pressure reductions. Conclusions: The MCP glove compressed the dorsum of the hand and middle finger at the design pressure.

A Suite of Tools for Technology Assessment

Science.gov (United States)

2007-09-01

Saden, Povinelli & Rosen, 1989). • This was a significant change in emphasis on the part of NASA, where technology had previously viewed as merely...Cost Analysis Symposium, April 13, 2005. A Suite of Tools for Technology Assessment 24 Bibliography - continued: • Sadin, Stanley T.; Povinelli

Effect of antigravity suit inflation on cardiovascular, PRA, and PVP responses in humans.

Science.gov (United States)

Kravik, S E; Keil, L C; Geelen, G; Wade, C E; Barnes, P R; Spaul, W A; Elder, C A; Greenleaf, J E

1986-08-01

Blood pressure, pulse rate (PR), serum osmolality and electrolytes, as well as plasma vasopressin (PVP) and plasma renin activity (PRA), were measured in five men and two women [mean age 38.6 +/- 3.9 (SE) yr] before, during, and after inflation of an antigravity suit that covered the legs and abdomen. After 24 h of fluid deprivation the subjects stood quietly for 3 h: the 1st h without inflation, the 2nd with inflation to 60 Torr, and the 3rd without inflation. A similar control noninflation experiment was conducted 10 mo after the inflation experiment using five of the seven subjects except that the suit was not inflated during the 3-h period. Mean arterial pressure increased by 14 +/- 4 (SE) Torr (P less than 0.05) with inflation and decreased by 15 +/- 5 Torr (P less than 0.05) after deflation. Pulse pressure (PP) increased by 7 +/- 2 Torr (P less than 0.05) with inflation and PR decreased by 11 +/- 5 beats/min (P less than 0.05); PP and PR returned to preinflation levels after deflation. Plasma volume decreased by 6.1 +/- 1.5% and 5.3 +/- 1.6% (P less than 0.05) during hours 1 and 3, respectively, and returned to base line during inflation. Inflation decreased PVP from 6.8 +/- 1.1 to 5.6 +/- 1.4 pg/ml (P less than 0.05) and abolished the significant rise in PRA during hour 1. Both PVP and PRA increased significantly after deflation: delta = 18.0 +/- 5.1 pg/ml and 4.34 +/- 1.71 ng angiotensin I X ml-1 X h-1, respectively. Serum osmolality and Na+ and K+ concentrations were unchanged during the 3 h of standing.(ABSTRACT TRUNCATED AT 250 WORDS)

Analysis of Preference Data Using Intermediate Test Statistic Abstract

African Journals Online (AJOL)

PROF. O. E. OSUAGWU

2013-06-01

Jun 1, 2013 ... West African Journal of Industrial and Academic Research Vol.7 No. 1 June ... Keywords:-Preference data, Friedman statistic, multinomial test statistic, intermediate test statistic. ... new method and consequently a new statistic ...

STS-87 Mission Specialist Winston E. Scott suits up

Science.gov (United States)

1997-01-01

STS-87 Mission Specialist Winston Scott dons his launch and entry suit with the assistance of a suit technician in the Operations and Checkout Building. This is Scotts second space flight. He and the five other crew members will depart shortly for Launch Pad 39B, where the Space Shuttle Columbia awaits liftoff on a 16-day mission to perform microgravity and solar research. Scott is scheduled to perform an extravehicular activity spacewalk with Mission Specialist Takao Doi, Ph.D., of the National Space Development Agency of Japan, during STS-87. He also performed a spacewalk on STS-72.

Abstraction ability as an indicator of success for learning object-oriented programming?

DEFF Research Database (Denmark)

Bennedsen, Jens Benned; Caspersen, Michael Edelgaard

2006-01-01

ability is operationalized as stages of cognitive development (for which validated tests exist). Programming ability is operationalized as grade in the final assessment of a model-based objects-first CS1. The validity of the operationalizations is discussed. Surprisingly, our study shows......Computer science educators generally agree that abstract thinking is a crucial component for learning computer science in general and programming in particular. We report on a study to confirm the hypothesis that general abstraction ability has a positive impact on programming ability. Abstraction...... that there is no correlation between stage of cognitive development (abstraction ability) and final grade in CS1 (programming ability). Possible explanations are identified....

Virtual Suit Fit Assessment Using Body Shape Model

Data.gov (United States)

National Aeronautics and Space Administration — Shoulder injury is one of the most serious risks for crewmembers in long-duration spaceflight. While suboptimal suit fit and contact pressures between the shoulder...

Abstracts

Institute of Scientific and Technical Information of China (English)

2011-01-01

The Western Theories of War Ethics and Contemporary Controversies Li Xiaodong U Ruijing （4） [ Abstract] In the field of international relations, war ethics is a concept with distinct westem ideological color. Due to factors of history and reality, the in

Reconstruing intolerance: abstract thinking reduces conservatives' prejudice against nonnormative groups.

Science.gov (United States)

Luguri, Jamie B; Napier, Jaime L; Dovidio, John F

2012-07-01

Myrdal (1944) described the "American dilemma" as the conflict between abstract national values ("liberty and justice for all") and more concrete, everyday prejudices. We leveraged construal-level theory to empirically test Myrdal's proposition that construal level (abstract vs. concrete) can influence prejudice. We measured individual differences in construal level (Study 1) and manipulated construal level (Studies 2 and 3); across these three studies, we found that adopting an abstract mind-set heightened conservatives' tolerance for groups that are perceived as deviating from Judeo-Christian values (gay men, lesbians, Muslims, and atheists). Among participants who adopted a concrete mind-set, conservatives were less tolerant of these nonnormative groups than liberals were, but political orientation did not have a reliable effect on tolerance among participants who adopted an abstract mind-set. Attitudes toward racial out-groups and dominant groups (e.g., Whites, Christians) were unaffected by construal level. In Study 3, we found that the effect of abstract thinking on prejudice was mediated by an increase in concerns about fairness.

What was uniform about the fin-de-siècle sailor suit?

Science.gov (United States)

Rose, Clare

2011-01-01

The sailor suits widely worn by children in late-nineteenth-century Britain have been interpreted at the time, and since, as expressions of an Imperial ethos. Yet, a closer examination of the ways that these garments were produced by mass manufacturers, mediated by advertisers and fashion advisors and consumed by families makes us question this characterization. Manufacturers interpreted sailor suits not as unchanging uniforms but as fashion items responding to seasonal changes. Consumers used them to assert social identities and social distinctions, selecting from the multiple variants available. Cultural commentators described sailor suits as emulating Royal practice—but also as ‘common’ and to be avoided. A close analysis of large samples of images and texts from the period 1870–1900 reveals how these different meanings overlapped, making the fin-de-siècle sailor suit a garment that undermines many of our assumptions.

Check Sample Abstracts.

Science.gov (United States)

Alter, David; Grenache, David G; Bosler, David S; Karcher, Raymond E; Nichols, James; Rajadhyaksha, Aparna; Camelo-Piragua, Sandra; Rauch, Carol; Huddleston, Brent J; Frank, Elizabeth L; Sluss, Patrick M; Lewandrowski, Kent; Eichhorn, John H; Hall, Janet E; Rahman, Saud S; McPherson, Richard A; Kiechle, Frederick L; Hammett-Stabler, Catherine; Pierce, Kristin A; Kloehn, Erica A; Thomas, Patricia A; Walts, Ann E; Madan, Rashna; Schlesinger, Kathie; Nawgiri, Ranjana; Bhutani, Manoop; Kanber, Yonca; Abati, Andrea; Atkins, Kristen A; Farrar, Robert; Gopez, Evelyn Valencerina; Jhala, Darshana; Griffin, Sonya; Jhala, Khushboo; Jhala, Nirag; Bentz, Joel S; Emerson, Lyska; Chadwick, Barbara E; Barroeta, Julieta E; Baloch, Zubair W; Collins, Brian T; Middleton, Owen L; Davis, Gregory G; Haden-Pinneri, Kathryn; Chu, Albert Y; Keylock, Joren B; Ramoso, Robert; Thoene, Cynthia A; Stewart, Donna; Pierce, Arand; Barry, Michelle; Aljinovic, Nika; Gardner, David L; Barry, Michelle; Shields, Lisa B E; Arnold, Jack; Stewart, Donna; Martin, Erica L; Rakow, Rex J; Paddock, Christopher; Zaki, Sherif R; Prahlow, Joseph A; Stewart, Donna; Shields, Lisa B E; Rolf, Cristin M; Falzon, Andrew L; Hudacki, Rachel; Mazzella, Fermina M; Bethel, Melissa; Zarrin-Khameh, Neda; Gresik, M Vicky; Gill, Ryan; Karlon, William; Etzell, Joan; Deftos, Michael; Karlon, William J; Etzell, Joan E; Wang, Endi; Lu, Chuanyi M; Manion, Elizabeth; Rosenthal, Nancy; Wang, Endi; Lu, Chuanyi M; Tang, Patrick; Petric, Martin; Schade, Andrew E; Hall, Geraldine S; Oethinger, Margret; Hall, Geraldine; Picton, Avis R; Hoang, Linda; Imperial, Miguel Ranoa; Kibsey, Pamela; Waites, Ken; Duffy, Lynn; Hall, Geraldine S; Salangsang, Jo-Anne M; Bravo, Lulette Tricia C; Oethinger, Margaret D; Veras, Emanuela; Silva, Elvia; Vicens, Jimena; Silva, Elvio; Keylock, Joren; Hempel, James; Rushing, Elizabeth; Posligua, Lorena E; Deavers, Michael T; Nash, Jason W; Basturk, Olca; Perle, Mary Ann; Greco, Alba; Lee, Peng; Maru, Dipen; Weydert, Jamie Allen; Stevens, Todd M; Brownlee, Noel A; Kemper, April E; Williams, H James; Oliverio, Brock J; Al-Agha, Osama M; Eskue, Kyle L; Newlands, Shawn D; Eltorky, Mahmoud A; Puri, Puja K; Royer, Michael C; Rush, Walter L; Tavora, Fabio; Galvin, Jeffrey R; Franks, Teri J; Carter, James Elliot; Kahn, Andrea Graciela; Lozada Muñoz, Luis R; Houghton, Dan; Land, Kevin J; Nester, Theresa; Gildea, Jacob; Lefkowitz, Jerry; Lacount, Rachel A; Thompson, Hannis W; Refaai, Majed A; Quillen, Karen; Lopez, Ana Ortega; Goldfinger, Dennis; Muram, Talia; Thompson, Hannis

2009-02-01

The following abstracts are compiled from Check Sample exercises published in 2008. These peer-reviewed case studies assist laboratory professionals with continuing medical education and are developed in the areas of clinical chemistry, cytopathology, forensic pathology, hematology, microbiology, surgical pathology, and transfusion medicine. Abstracts for all exercises published in the program will appear annually in AJCP.

A suite of benchmark and challenge problems for enhanced geothermal systems

Energy Technology Data Exchange (ETDEWEB)

White, Mark; Fu, Pengcheng; McClure, Mark; Danko, George; Elsworth, Derek; Sonnenthal, Eric; Kelkar, Sharad; Podgorney, Robert

2017-11-06

A diverse suite of numerical simulators is currently being applied to predict or understand the performance of enhanced geothermal systems (EGS). To build confidence and identify critical development needs for these analytical tools, the United States Department of Energy, Geothermal Technologies Office sponsored a Code Comparison Study (GTO-CCS), with participants from universities, industry, and national laboratories. A principal objective for the study was to create a community forum for improvement and verification of numerical simulators for EGS modeling. Teams participating in the study were those representing U.S. national laboratories, universities, and industries, and each team brought unique numerical simulation capabilities to bear on the problems. Two classes of problems were developed during the study, benchmark problems and challenge problems. The benchmark problems were structured to test the ability of the collection of numerical simulators to solve various combinations of coupled thermal, hydrologic, geomechanical, and geochemical processes. This class of problems was strictly defined in terms of properties, driving forces, initial conditions, and boundary conditions. The challenge problems were based on the enhanced geothermal systems research conducted at Fenton Hill, near Los Alamos, New Mexico, between 1974 and 1995. The problems involved two phases of research, stimulation, development, and circulation in two separate reservoirs. The challenge problems had specific questions to be answered via numerical simulation in three topical areas: 1) reservoir creation/stimulation, 2) reactive and passive transport, and 3) thermal recovery. Whereas the benchmark class of problems were designed to test capabilities for modeling coupled processes under strictly specified conditions, the stated objective for the challenge class of problems was to demonstrate what new understanding of the Fenton Hill experiments could be realized via the application of

Early positivity signals changes in an abstract linguistic pattern.

Directory of Open Access Journals (Sweden)

Júlia Monte-Ordoño

Full Text Available The extraction of abstract structures from speech (or from gestures in the case of sign languages has been claimed to be a fundamental mechanism for language acquisition. In the present study we registered the neural responses that are triggered when a violation of an abstract, token-independent rule is detected. We registered ERPs while presenting participants with trisyllabic CVCVCV nonsense words in an oddball paradigm. Standard stimuli followed an ABB rule (where A and B are different syllables. Importantly, to distinguish neural responses triggered by changes in surface information from responses triggered by changes in the underlying abstract structure, we used two types of deviant stimuli. Phoneme deviants differed from standards only in their phonemes. Rule deviants differed from standards in both their phonemes and their composing rule. We observed a significant positivity as early as 300 ms after the presentation of deviant stimuli that violated the abstract rule (Rule deviants. The amplitude of this neural response was correlated with participants' performance in a behavioral rule learning test. Differences in electrophysiological responses observed between learners and non-learners suggest that individual differences in an abstract rule learning task might be related to how listeners select relevant sources of information.

Development of a Fan for Future Space Suit Applications

Science.gov (United States)

Paul. Heather L.; Converse, David; Dionne, Steven; Moser, Jeff

2010-01-01

NASA's next generation space suit system will place new demands on the fan used to circulate breathing gas through the ventilation loop of the portable life support system. Long duration missions with frequent extravehicular activities (EVAs), the requirement for significant increases in reliability and durability, and a mission profile that imposes strict limits on weight, volume and power create the basis for a set of requirements that demand more performance than is available from existing fan designs. This paper describes the development of a new fan to meet these needs. A centrifugal fan was designed with a normal operating speed of approximately 39,400 rpm to meet the ventilation flow requirements while also meeting the aggressive minimal packaging, weight and power requirements. The prototype fan also operates at 56,000 rpm to satisfy a second operating condition associated with a single fan providing ventilation flow to two spacesuits connected in series. This fan incorporates a novel nonmetallic "can" to keep the oxygen flow separate from the motor electronics, thus eliminating ignition potential. The nonmetallic can enables a small package size and low power consumption. To keep cost and schedule within project bounds a commercial motor controller was used. The fan design has been detailed and implemented using materials and approaches selected to address anticipated mission needs. Test data is presented to show how this fan performs relative to anticipated ventilation requirements for the EVA portable life support system. Additionally, data is presented to show tolerance to anticipated environmental factors such as acoustics, shock, and vibration. Recommendations for forward work to progress the technology readiness level and prepare the fan for the next EVA space suit system are also discussed.

Abstract Datatypes in PVS

Science.gov (United States)

Owre, Sam; Shankar, Natarajan

1997-01-01

PVS (Prototype Verification System) is a general-purpose environment for developing specifications and proofs. This document deals primarily with the abstract datatype mechanism in PVS which generates theories containing axioms and definitions for a class of recursive datatypes. The concepts underlying the abstract datatype mechanism are illustrated using ordered binary trees as an example. Binary trees are described by a PVS abstract datatype that is parametric in its value type. The type of ordered binary trees is then presented as a subtype of binary trees where the ordering relation is also taken as a parameter. We define the operations of inserting an element into, and searching for an element in an ordered binary tree; the bulk of the report is devoted to PVS proofs of some useful properties of these operations. These proofs illustrate various approaches to proving properties of abstract datatype operations. They also describe the built-in capabilities of the PVS proof checker for simplifying abstract datatype expressions.

Fluid replacement advice during work in fully encapsulated impermeable chemical protective suits

NARCIS (Netherlands)

Rubenstein, C.D.; Hartog, E.A. den; Deaton, A.S.; Bogerd, C.P.; Kant, S. de

2017-01-01

A major concern for responders to hazardous materials (HazMat) incidents is the heat strain that is caused by fully encapsulated impermeable chemical protective suits. In a research project, funded by the US Department of Defense, the thermal strain experienced when wearing these suits was studied.

Effect of fastskin suits on performance, drag, and energy cost of swimming.

Science.gov (United States)

Chatard, Jean-Claude; Wilson, Barry

2008-06-01

To investigate the effect of fastskin suits on 25- to 800-m performances, drag, and energy cost of swimming. The performances, stroke rate and distance per stroke, were measured for 14 competitive swimmers in a 25-m pool, when wearing a normal suit (N) and when wearing a full-body suit (FB) or a waist-to-ankle suit (L). Passive drag, oxygen uptake, blood lactate, and the perceived exertion were measured in a flume. There was a 3.2% +/- 2.4% performance benefit for all subjects over the six distances covered at maximal speed wearing FB and L when compared with N. When wearing L, the gain was significantly lower (1.8% +/- 2.5%, P energy cost of swimming was significantly reduced when wearing FB and L by 4.5% +/- 5.4% and 5.5% +/- 3.1%, respectively (P energy cost of submaximal swimming and an increased distance per stroke, at the same stroke rates, and reduced freestyle performance time.

Sleep Supports the Slow Abstraction of Gist from Visual Perceptual Memories.

Science.gov (United States)

Lutz, Nicolas D; Diekelmann, Susanne; Hinse-Stern, Patricia; Born, Jan; Rauss, Karsten

2017-02-17

Sleep benefits the consolidation of individual episodic memories. In the long run, however, it may be more efficient to retain the abstract gist of single, related memories, which can be generalized to similar instances in the future. While episodic memory is enhanced after one night of sleep, effective gist abstraction is thought to require multiple nights. We tested this hypothesis using a visual Deese-Roediger-McDermott paradigm, examining gist abstraction and episodic-like memory consolidation after 20 min, after 10 hours, as well as after one year of retention. While after 10 hours, sleep enhanced episodic-like memory for single items, it did not affect gist abstraction. One year later, however, we found significant gist knowledge only if subjects had slept immediately after encoding, while there was no residual memory for individual items. These findings indicate that sleep after learning strengthens episodic-like memories in the short term and facilitates long-term gist abstraction.

Radiation Protection Studies of International Space Station Extravehicular Activity Space Suits

Science.gov (United States)

Cucinotta, Francis A. (Editor); Shavers, Mark R. (Editor); Saganti, Premkumar B. (Editor); Miller, Jack (Editor)

2003-01-01

This publication describes recent investigations that evaluate radiation shielding characteristics of NASA's and the Russian Space Agency's space suits. The introduction describes the suits and presents goals of several experiments performed with them. The first chapter provides background information about the dynamic radiation environment experienced at ISS and summarized radiation health and protection requirements for activities in low Earth orbit. Supporting studies report the development and application of a computer model of the EMU space suit and the difficulty of shielding EVA crewmembers from high-energy reentrant electrons, a previously unevaluated component of the space radiation environment. Chapters 2 through 6 describe experiments that evaluate the space suits' radiation shielding characteristics. Chapter 7 describes a study of the potential radiological health impact on EVA crewmembers of two virtually unexamined environmental sources of high-energy electrons-reentrant trapped electrons and atmospheric albedo or "splash" electrons. The radiological consequences of those sources have not been evaluated previously and, under closer scrutiny. A detailed computational model of the shielding distribution provided by components of the NASA astronauts' EMU is being developed for exposure evaluation studies. The model is introduced in Chapters 8 and 9 and used in Chapter 10 to investigate how trapped particle anisotropy impacts female organ doses during EVA. Chapter 11 presents a review of issues related to estimating skin cancer risk form space radiation. The final chapter contains conclusions about the protective qualities of the suit brought to light form these studies, as well as recommendations for future operational radiation protection.

U.S. Climate Normals Product Suite (1981-2010)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The NOAA Climate Normals are a large suite of data products that provide users with many tools to understand typical climate conditions for thousands of locations...

Wireless Wearable Multisensory Suite and Real-Time Prediction of Obstructive Sleep Apnea Episodes.

Science.gov (United States)

Le, Trung Q; Cheng, Changqing; Sangasoongsong, Akkarapol; Wongdhamma, Woranat; Bukkapatnam, Satish T S

2013-01-01

Obstructive sleep apnea (OSA) is a common sleep disorder found in 24% of adult men and 9% of adult women. Although continuous positive airway pressure (CPAP) has emerged as a standard therapy for OSA, a majority of patients are not tolerant to this treatment, largely because of the uncomfortable nasal air delivery during their sleep. Recent advances in wireless communication and advanced ("bigdata") preditive analytics technologies offer radically new point-of-care treatment approaches for OSA episodes with unprecedented comfort and afforadability. We introduce a Dirichlet process-based mixture Gaussian process (DPMG) model to predict the onset of sleep apnea episodes based on analyzing complex cardiorespiratory signals gathered from a custom-designed wireless wearable multisensory suite. Extensive testing with signals from the multisensory suite as well as PhysioNet's OSA database suggests that the accuracy of offline OSA classification is 88%, and accuracy for predicting an OSA episode 1-min ahead is 83% and 3-min ahead is 77%. Such accurate prediction of an impending OSA episode can be used to adaptively adjust CPAP airflow (toward improving the patient's adherence) or the torso posture (e.g., minor chin adjustments to maintain steady levels of the airflow).

In-Package Chemistry Abstraction

Energy Technology Data Exchange (ETDEWEB)

P.S. Domski

2003-07-21

The work associated with the development of this model report was performed in accordance with the requirements established in ''Technical Work Plan for Waste Form Degradation Modeling, Testing, and Analyses in Support of SR and LA'' (BSC 2002a). The in-package chemistry model and in-package chemistry model abstraction are developed to predict the bulk chemistry inside of a failed waste package and to provide simplified expressions of that chemistry. The purpose of this work is to provide the abstraction model to the Performance Assessment Project and the Waste Form Department for development of geochemical models of the waste package interior. The scope of this model report is to describe the development and validation of the in-package chemistry model and in-package chemistry model abstraction. The in-package chemistry model will consider chemical interactions of water with the waste package materials and the waste form for commercial spent nuclear fuel (CSNF) and codisposed high-level waste glass (HLWG) and N Reactor spent fuel (CDNR). The in-package chemistry model includes two sub-models, the first a water vapor condensation (WVC) model, where water enters a waste package as vapor and forms a film on the waste package components with subsequent film reactions with the waste package materials and waste form--this is a no-flow model, the reacted fluids do not exit the waste package via advection. The second sub-model of the in-package chemistry model is the seepage dripping model (SDM), where water, water that may have seeped into the repository from the surrounding rock, enters a failed waste package and reacts with the waste package components and waste form, and then exits the waste package with no accumulation of reacted water in the waste package. Both of the submodels of the in-package chemistry model are film models in contrast to past in-package chemistry models where all of the waste package pore space was filled with water. The

In-Package Chemistry Abstraction

International Nuclear Information System (INIS)

P.S. Domski

2003-01-01

The work associated with the development of this model report was performed in accordance with the requirements established in ''Technical Work Plan for Waste Form Degradation Modeling, Testing, and Analyses in Support of SR and LA'' (BSC 2002a). The in-package chemistry model and in-package chemistry model abstraction are developed to predict the bulk chemistry inside of a failed waste package and to provide simplified expressions of that chemistry. The purpose of this work is to provide the abstraction model to the Performance Assessment Project and the Waste Form Department for development of geochemical models of the waste package interior. The scope of this model report is to describe the development and validation of the in-package chemistry model and in-package chemistry model abstraction. The in-package chemistry model will consider chemical interactions of water with the waste package materials and the waste form for commercial spent nuclear fuel (CSNF) and codisposed high-level waste glass (HLWG) and N Reactor spent fuel (CDNR). The in-package chemistry model includes two sub-models, the first a water vapor condensation (WVC) model, where water enters a waste package as vapor and forms a film on the waste package components with subsequent film reactions with the waste package materials and waste form--this is a no-flow model, the reacted fluids do not exit the waste package via advection. The second sub-model of the in-package chemistry model is the seepage dripping model (SDM), where water, water that may have seeped into the repository from the surrounding rock, enters a failed waste package and reacts with the waste package components and waste form, and then exits the waste package with no accumulation of reacted water in the waste package. Both of the submodels of the in-package chemistry model are film models in contrast to past in-package chemistry models where all of the waste package pore space was filled with water. The current in

Development of an online men’s suits customizing system using heuristic procedure for wheelchair users

NARCIS (Netherlands)

Jeong, Minseok; Yang, Chuneun; You, Heecheon; Park, Kwangae; Lee, W.

2016-01-01

An online suit-customizing system for the special accessibility needs of wheelchair users should be developed because the demand for business suits by wheelchair users involved in economic activities has increased. This study
develops a user interface an online customizing system for men's suits

Ventilation Transport Trade Study for Future Space Suit Life Support Systems

Science.gov (United States)

Kempf, Robert; Vogel, Matthew; Paul, Heather L.

2008-01-01

A new and advanced portable life support system (PLSS) for space suit surface exploration will require a durable, compact, and energy efficient system to transport the ventilation stream through the space suit. Current space suits used by NASA circulate the ventilation stream via a ball-bearing supported centrifugal fan. As NASA enters the design phase for the next generation PLSS, it is necessary to evaluate available technologies to determine what improvements can be made in mass, volume, power, and reliability for a ventilation transport system. Several air movement devices already designed for commercial, military, and space applications are optimized in these areas and could be adapted for EVA use. This paper summarizes the efforts to identify and compare the latest fan and bearing technologies to determine candidates for the next generation PLSS.

LHCb - Automated Testing Infrastructure for the Software Framework Gaudi

CERN Multimedia

Clemencic, M

2009-01-01

An extensive test suite is the first step towards the delivery of robust software, but it is not always easy to implement it, especially in projects with many developers. An easy to use and flexible infrastructure to use to write and execute the tests reduces the work each developer has to do to instrument his packages with tests. At the same time, the infrastructure gives the same look and feel to the tests and allows automated execution of the test suite. For Gaudi, we decided to develop the testing infrastructure on top of the free tool QMTest, used already in LCG Application Area for the routine tests run in the nightly build system. The high flexibility of QMTest allowed us to integrate it in the Gaudi package structure. A specialized test class and some utility functions have been developed to simplify the definition of a test for a Gaudi-based application. Thanks to the testing infrastructure described here, we managed to quickly extend the standard Gaudi test suite and add tests to the main LHCb appli...

Telemetry Standards, IRIG Standard 106-17, Chapter 22, Network Based Protocol Suite

Science.gov (United States)

2017-07-01

requirements. 22.2 Network Access Layer 22.2.1 Physical Layer Connectors and cable media should meet the electrical or optical properties required by the...Telemetry Standards, IRIG Standard 106-17 Chapter 22, July 2017 i CHAPTER 22 Network -Based Protocol Suite Acronyms...iii Chapter 22. Network -Based Protocol Suite

Exploration Space Suit Architecture and Destination Environmental-Based Technology Development

Science.gov (United States)

Hill, Terry R.; McFarland, Shane M.; Korona, F. Adam

2013-01-01

This paper continues forward where EVA Space Suit Architecture: Low Earth Orbit Vs. Moon Vs. Mars left off in the development of a space suit architecture that is modular in design and could be reconfigured prior to launch or during any given mission depending on the tasks or destination. This space suit system architecture and technologies required based on human exploration (EVA) destinations will be discussed, and how these systems should evolve to meet the future exploration EVA needs of the US human space flight program. A series of exercises and analyses provided a strong indication that the Constellation Program space suit architecture, with its maximum reuse of technology and functionality across a range of mission profiles and destinations, is postured to provide a viable solution for future space exploration missions. The destination environmental analysis demonstrates that the modular architecture approach could provide the lowest mass and mission cost for the protection of the crew, given any human mission outside of low-Earth orbit. Additionally, some of the high-level trades presented here provide a review of the environmental and nonenvironmental design drivers that will become increasingly important as humans venture farther from Earth. The presentation of destination environmental data demonstrates a logical clustering of destination design environments that allows a focused approach to technology prioritization, development, and design that will maximize the return on investment, largely independent of any particular design reference mission.

Repetitive Quiescence in Implementation and Testing (Extended Abstract)

NARCIS (Netherlands)

Tretmans, G.J.; Wolisz, A.; Schieferdecker, I.; Rennoch, A.

This paper studies implementation relations and testing based on labelled transition sys- tems, using the assumption that implementations communicate with their environment via inputs and outputs. Such implementations are formalized by restricting the class of transition systems to those systems

The causes of medical malpractice suits against radiologists in the United States.

Science.gov (United States)

Whang, Jeremy S; Baker, Stephen R; Patel, Ronak; Luk, Lyndon; Castro, Alejandro

2013-02-01

To determine the most frequent causes of malpractice suits as derived from credentialing data of 8401 radiologists. This study was approved by the Institutional Review Board of New Jersey Medical School. A total of 8401 radiologists in 47 states participating in the network of One-Call Medical, a broker for computed tomographic/magnetic resonance studies in workers' compensation cases, were required to provide their malpractice history as part of their credentialing application. Of these, 2624 (31%) radiologists had at least one claim in their career. In each enrollee's credentialing file, if there was a claim against the enrollee there was a narrative regarding each malpractice case from which, in most instances, a primary allegation could be discerned. Among the 4793 cases, an alleged cause could be derived from the narrative in 4043 (84%). Statistical analysis was performed with Stata 12 (2011; Stata, College Station, Tex) software. The most common general cause was error in diagnosis (14.83 claims per 1000 person-years [95% confidence interval {CI}: 14.19, 15.51]). In this category, breast cancer was the most frequently missed diagnosis (3.57 claims per 1000 person-years [95% CI: 3.26, 3.91]), followed by nonspinal fractures (2.49 claims per 1000 person-years [95% CI: 2.28, 2.72]), spinal fractures (1.32 claims per 1000 person-years [95% CI: 1.16, 1.49]), lung cancer (1.26 claims per 1000 person-years [95% CI: 1.11, 1.42]), and vascular disease (1.08 claims per 1000 person-years [95% CI: 0.93, 1.24]). The category next in frequency was procedural complications (1.76 claims per 1000 person-years [95% CI: 1.58, 1.96]), followed by inadequate communication with either patient (0.40 claim per 1000 person-years [95% CI: 0.32, 0.50]) or referrer (0.71 claim per 1000 person-years [95% CI: 0.60, 0.84]). Radiologists had only a peripheral role in 0.92 claim per 1000 person-years (95% CI: 0.77, 1.10). Failure to recommend additional testing was a rare cause (0.41 claim

Third invitational well-testing symposium: well testing in low permeability environments

Energy Technology Data Exchange (ETDEWEB)

Doe, T.W.; Schwarz, W.J. (eds.)

1981-03-01

The testing of low permeability rocks is common to waste disposal, fossil energy resource development, underground excavation, and geothermal energy development. This document includes twenty-six papers and abstracts, divided into the following sessions: opening session, case histories and related phenomena, well test design in low permeability formations, analysis and interpretation of well test data, and instrumentation for well tests. Separate abstracts were prepared for 15 of the 16 papers; the remaining paper has been previously abstracted. (DLC)

Third invitational well-testing symposium: well testing in low permeability environments

International Nuclear Information System (INIS)

Doe, T.W.; Schwarz, W.J.

1981-03-01

The testing of low permeability rocks is common to waste disposal, fossil energy resource development, underground excavation, and geothermal energy development. This document includes twenty-six papers and abstracts, divided into the following sessions: opening session, case histories and related phenomena, well test design in low permeability formations, analysis and interpretation of well test data, and instrumentation for well tests. Separate abstracts were prepared for 15 of the 16 papers; the remaining paper has been previously abstracted

Beauty in abstract paintings: Perceptual contrast and statistical properties

Directory of Open Access Journals (Sweden)

Birgit eMallon

2014-03-01

Full Text Available In this study, we combined the behavioral and objective approach in the field of empirical aesthetics. First, we studied the perception of beauty by investigating shifts in evaluation on perceived beauty of abstract artworks (Experiment 1. Because the participants showed heterogeneous individual preferences for the paintings, we divided them into seven clusters for the test. The experiment revealed a clear pattern of perceptual contrast. The perceived beauty of abstract paintings increased after exposure to paintings that were rated as less beautiful, and it decreased after exposure to paintings that were rated as more beautiful. Next, we searched for correlations of beauty ratings and perceptual contrast with statistical properties of abstract artworks (Experiment 2. The participants showed significant preferences for certain image properties. These preferences differed between the clusters of participants. Strikingly, next to color measures like hue, saturation, value and lightness, the recently described PHOG self-similarity value seems to be a predictor for aesthetic appreciation of abstract artworks. We speculate that the shift in evaluation in Experiment 1 was, at least in part, based on low-level adaptation to some of the statistical image properties analyzed in Experiment 2. In conclusion, our findings demonstrate that the perception of beauty in abstract artworks is altered after exposure to beautiful or non-beautiful images and correlates with particular image properties, especially color measures and self-similarity.

Assessment of Protective Gloves for Use with Airfed Suits.

Science.gov (United States)

Millard, Claire E; Vaughan, Nicholas P

2015-10-01

Gloves are often needed for hand protection at work, but they can impair manual dexterity, especially if they are multilayered or ill-fitting. This article describes two studies of gloves to be worn with airfed suits (AFS) for nuclear decommissioning or containment level 4 (CL4) microbiological work. Both sets of workers wear multiple layers of gloves for protection and to accommodate decontamination procedures. Nuclear workers are also often required to wear cut-resistant gloves as an extra layer of protection. A total of 15 subjects volunteered to take part in manual dexterity testing of the different gloving systems. The subjects' hands were measured to ensure that the appropriate sized gloves were used. The gloves were tested with the subjects wearing the complete clothing ensembles appropriate to the work, using a combination of standard dexterity tests: the nine-hole peg test; a pin test adapted from the European Standard for protective gloves, the Purdue Pegboard test, and the Minnesota turning test. Specialized tests such as a hand tool test were used to test nuclear gloves, and laboratory-type manipulation tasks were used to test CL4 gloves. Subjective assessments of temperature sensation and skin wettedness were made before and after the dexterity tests of the nuclear gloves only. During all assessments, we made observations and questioned the subjects about ergonomic issues related to the clothing ensembles. Overall, the results show that the greater the thickness of the gloves and the number of layers the more the levels of manual dexterity performance are degraded. The nuclear cut-resistant gloves with the worst level of dexterity were stiff and inflexible and the subjects experienced problems picking up small items and bending their hands. The work also highlighted other factors that affect manual dexterity performance, including proper sizing, interactions with the other garments worn at the time, and the work equipment in use. In conclusion, when

Adobe Creative Suite 6 Design and Web Premium all-in-one for dummies

CERN Document Server

Smith, Jennifer; Gerantabee, Fred

2012-01-01

The must-have book on the leading suite of software for graphic and web designers Fully revised and updated this hands-on resource offers a one-stop learning opportunity through eight mini-book dedicated to each product inside Adobe's Design & Web Premium Suite. The mini-books include Adobe Creative Suite Basics, InDesign, Illustrator, Photoshop, Acrobat, Dreamweaver, Flash, Fireworks. The book may contain new image enhancements to After Effects, 64-bit versions of Illustrator and Flash Professional, and a new tool, dubbed Helium, that will enable designers to create content using HTML5 and

Experimental Evaluation of Energy Efficiency for a Soft Wearable Robotic Suit.

Science.gov (United States)

Jin, Shanhai; Iwamoto, Noriyasu; Hashimoto, Kazunobu; Yamamoto, Motoji

2016-10-12

This paper presents a new soft wearable robotic suit for energy-efficient walking in daily activities for elderly persons. The presented robotic suit provides a small yet effective assistive force for hip flexion through winding belts that include elastic elements. In addition, it does not restrict the range of movement in the lower limbs. Moreover, its structure is simple and lightweight, and thus wearers can easily take the device on and off by themselves. Experimental results on nine elderly subjects (age = 74.23.7 years) show that the robotic suit worn and powered on (PON) significantly reduced energy expenditure by an average of 5.9 % compared with the condition of worn but powered off (POFF). Furthermore, compared with the POFF condition, there was a significant improvement in gait characteristics in the PON condition for all subjects.

Abstraction and art.

Science.gov (United States)

Gortais, Bernard

2003-07-29

In a given social context, artistic creation comprises a set of processes, which relate to the activity of the artist and the activity of the spectator. Through these processes we see and understand that the world is vaster than it is said to be. Artistic processes are mediated experiences that open up the world. A successful work of art expresses a reality beyond actual reality: it suggests an unknown world using the means and the signs of the known world. Artistic practices incorporate the means of creation developed by science and technology and change forms as they change. Artists and the public follow different processes of abstraction at different levels, in the definition of the means of creation, of representation and of perception of a work of art. This paper examines how the processes of abstraction are used within the framework of the visual arts and abstract painting, which appeared during a period of growing importance for the processes of abstraction in science and technology, at the beginning of the twentieth century. The development of digital platforms and new man-machine interfaces allow multimedia creations. This is performed under the constraint of phases of multidisciplinary conceptualization using generic representation languages, which tend to abolish traditional frontiers between the arts: visual arts, drama, dance and music.

Leveraging Active Knit Technologies for Aerospace Pressure Suit Applications

Data.gov (United States)

National Aeronautics and Space Administration — Anti-Gravity Suits (AGS) are garments used in astronautics to prevent crew from experiencing orthostatic intolerance (OI) and consequential blackouts while...

Safety Tips: Avoiding Negligence Suits in Chemistry Teaching.

Science.gov (United States)

Gerlovich, Jack A.

1983-01-01

Discusses various aspects related to negligence on the part of chemistry teachers. Areas addressed include negligence in tort law, avoiding negligence suits, proper instructions, proper supervision, equipment maintenance, and other considerations such as sovereign immunity, and contributory versus comparative negligence. (JN)

Completeness of Lyapunov Abstraction

DEFF Research Database (Denmark)

Wisniewski, Rafal; Sloth, Christoffer

2013-01-01

the vector field, which allows the generation of a complete abstraction. To compute the functions that define the subdivision of the state space in an algorithm, we formulate a sum of squares optimization problem. This optimization problem finds the best subdivisioning functions, with respect to the ability......This paper addresses the generation of complete abstractions of polynomial dynamical systems by timed automata. For the proposed abstraction, the state space is divided into cells by sublevel sets of functions. We identify a relation between these functions and their directional derivatives along...

BioWord: A sequence manipulation suite for Microsoft Word

Directory of Open Access Journals (Sweden)

Anzaldi Laura J

2012-06-01

Full Text Available Abstract Background The ability to manipulate, edit and process DNA and protein sequences has rapidly become a necessary skill for practicing biologists across a wide swath of disciplines. In spite of this, most everyday sequence manipulation tools are distributed across several programs and web servers, sometimes requiring installation and typically involving frequent switching between applications. To address this problem, here we have developed BioWord, a macro-enabled self-installing template for Microsoft Word documents that integrates an extensive suite of DNA and protein sequence manipulation tools. Results BioWord is distributed as a single macro-enabled template that self-installs with a single click. After installation, BioWord will open as a tab in the Office ribbon. Biologists can then easily manipulate DNA and protein sequences using a familiar interface and minimize the need to switch between applications. Beyond simple sequence manipulation, BioWord integrates functionality ranging from dyad search and consensus logos to motif discovery and pair-wise alignment. Written in Visual Basic for Applications (VBA as an open source, object-oriented project, BioWord allows users with varying programming experience to expand and customize the program to better meet their own needs. Conclusions BioWord integrates a powerful set of tools for biological sequence manipulation within a handy, user-friendly tab in a widely used word processing software package. The use of a simple scripting language and an object-oriented scheme facilitates customization by users and provides a very accessible educational platform for introducing students to basic bioinformatics algorithms.

Advanced Gas Sensing Technology for Space Suits, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Advanced space suits require lightweight, low-power, durable sensors for monitoring critical life support materials. No current compact sensors have the tolerance...

Temporal dynamics of categorization: Forgetting as the basis of abstraction and generalization

Directory of Open Access Journals (Sweden)

Haley eVlach

2014-09-01

Full Text Available Historically, models of categorization have focused on how learners track frequencies and co-occurrence information to abstract relevant category features for generalization. The current study takes a different approach by examining how the temporal dynamics of categorization affect abstraction and generalization. In the learning phase of the experiment, all relevant category features were presented an equal number of times across category exemplars. However, the relevant features were presented on one of two learning schedules: massed or interleaved. At a series of immediate and delayed tests, learners were asked to generalize to novel exemplars that contained massed features, interleaved features, or all novel features. The results of this experiment revealed that, at an immediate test, learners more readily generalized based upon features presented on a massed schedule. Conversely, at a delayed test, learners more readily generalized based upon features presented on an interleaved schedule, until information was no longer readily retrievable from memory. These findings suggest that forgetting and retrieval processes engendered by the temporal dynamics of learning are used as a basis of abstraction, implicating forgetting as a central mechanism of generalization.

Smells in software test code

NARCIS (Netherlands)

Garousi, Vahid; Küçük, Barış

2018-01-01

As a type of anti-pattern, test smells are defined as poorly designed tests and their presence may negatively affect the quality of test suites and production code. Test smells are the subject of active discussions among practitioners and researchers, and various guidelines to handle smells are

Metaphor: Bridging embodiment to abstraction.

Science.gov (United States)

Jamrozik, Anja; McQuire, Marguerite; Cardillo, Eileen R; Chatterjee, Anjan

2016-08-01

Embodied cognition accounts posit that concepts are grounded in our sensory and motor systems. An important challenge for these accounts is explaining how abstract concepts, which do not directly call upon sensory or motor information, can be informed by experience. We propose that metaphor is one important vehicle guiding the development and use of abstract concepts. Metaphors allow us to draw on concrete, familiar domains to acquire and reason about abstract concepts. Additionally, repeated metaphoric use drawing on particular aspects of concrete experience can result in the development of new abstract representations. These abstractions, which are derived from embodied experience but lack much of the sensorimotor information associated with it, can then be flexibly applied to understand new situations.

Technical abstracts: Mechanical engineering, 1990

International Nuclear Information System (INIS)

Broesius, J.Y.

1991-01-01

This document is a compilation of the published, unclassified abstracts produced by mechanical engineers at Lawrence Livermore National Laboratory (LLNL) during the calendar year 1990. Many abstracts summarize work completed and published in report form. These are UCRL-JC series documents, which include the full text of articles to be published in journals and of papers to be presented at meetings, and UCID reports, which are informal documents. Not all UCIDs contain abstracts: short summaries were generated when abstracts were not included. Technical Abstracts also provides descriptions of those documents assigned to the UCRL-MI (miscellaneous) category. These are generally viewgraphs or photographs presented at meetings. An author index is provided at the back of this volume for cross referencing

[Maximal exercise in spinal cord injured subjects: effects of an antigravity suit].

Science.gov (United States)

Bazzi-Grossin, C; Bonnin, P; Bailliart, O; Bazzi, H; Kedra, A W; Martineaud, J P

1996-01-01

an Ergostar analyser every 30 seconds. Heart rate was registered continuously using a cardio-frequence-meter Baumann, and ECG was observed on a Cardiovit electro-cardiograph. Each subject reached maximal exercises on different days: one without any contention, and the other one with abdomen and legs contention using an antigravity suit, inflated to 45-50 mm Hg for legs and 30-40 mm Hg for abdomen. The able-bodied subjects VO2 peak was 24 +/- 5.8 mL min-1 kg-1, without any change on peak VO2 and on cardiac frequency when pressure suit was used. Results were different for paraplegics: peak VO2 was significantly higher (21.5 +/- 6.5 mL min-1 kg-1 without contention and 23.8 +/- 6.3 mL min-1 kg-1 with contention), heart rate was significantly lower at all stages of exercise with antigravity suit and comfort was better during exercise and rest. In our study, contention contributed to increase paraplegics's performances, but responses depend also on spinal cord level, injury age, spasticity. Therefore, testing paraplegics using an antigravity suit may be useful to determine if neurovegetative disturbances significantly modify their cardiac adaptation and capability. If gravity suit is efficient, contention tights might be prescribed, with respect to subject's legs measurements. But, because these tights are very difficult to put on, their efficiency has to be proved before, the motivation of the subject is essential too.

Abstract analogical reasoning in high-functioning children with autism spectrum disorders.

Science.gov (United States)

Green, Adam E; Kenworthy, Lauren; Mosner, Maya G; Gallagher, Natalie M; Fearon, Edward W; Balhana, Carlos D; Yerys, Benjamin E

2014-12-01

Children with autism spectrum disorders (ASD) exhibit a deficit in spontaneously recognizing abstract similarities that are crucial for generalizing learning to new situations. This may contribute to deficits in the development of appropriate schemas for navigating novel situations, including social interactions. Analogical reasoning is the central cognitive mechanism that enables typically developing children to understand abstract similarities between different situations. Intriguingly, studies of high-functioning children with ASD point to a relative cognitive strength in basic, nonabstract forms of analogical reasoning. If this analogical reasoning ability extends to abstract analogical reasoning (i.e., between superficially dissimilar situations), it may provide a bridge between a cognitive capability and core ASD deficits in areas such as generalization and categorization. This study tested whether preserved analogical reasoning abilities in ASD can be extended to abstract analogical reasoning, using photographs of real-world items and situations. Abstractness of the analogies was determined via a quantitative measure of semantic distance derived from latent semantic analysis. Children with ASD performed as well as typically developing children at identifying abstract analogical similarities when explicitly instructed to apply analogical reasoning. Individual differences in abstract analogical reasoning ability predicted individual differences in a measure of social function in the ASD group. Preliminary analyses indicated that children with ASD, but not typically developing children, showed an effect of age on abstract analogical reasoning. These results provide new evidence that children with ASD are capable of identifying abstract similarities through analogical reasoning, pointing to abstract analogical reasoning as a potential lever for improving generalization skills and social function in ASD. © 2014 International Society for Autism Research, Wiley

Perception of emotion in abstract artworks: a multidisciplinary approach.

Science.gov (United States)

Melcher, David; Bacci, Francesca

2013-01-01

There is a long-standing and fundamental debate regarding how emotion can be expressed by fine art. Some artists and theorists have claimed that certain features of paintings, such as color, line, form, and composition, can consistently express an "objective" emotion, while others have argued that emotion perception is subjective and depends more on expertise of the observer. Here, we discuss two studies in which we have found evidence for consistency in observer ratings of emotion for abstract artworks. We have developed a stimulus set of abstract art images to test emotional priming, both between different painting images and between paintings and faces. The ratings were also used in a computational vision analysis of the visual features underlying emotion expression. Overall, these findings suggest that there is a strong bottom-up and objective aspect to perception of emotion in abstract artworks that may tap into basic visual mechanisms. © 2013 Elsevier B.V. All rights reserved.

The triconnected abstraction of process models

OpenAIRE

Polyvyanyy, Artem; Smirnov, Sergey; Weske, Mathias

2009-01-01

Contents: Artem Polyvanny, Sergey Smirnow, and Mathias Weske The Triconnected Abstraction of Process Models 1 Introduction 2 Business Process Model Abstraction 3 Preliminaries 4 Triconnected Decomposition 4.1 Basic Approach for Process Component Discovery 4.2 SPQR-Tree Decomposition 4.3 SPQR-Tree Fragments in the Context of Process Models 5 Triconnected Abstraction 5.1 Abstraction Rules 5.2 Abstraction Algorithm 6 Related Work and Conclusions

The IMBA suite: integrated modules for bioassay analysis

Energy Technology Data Exchange (ETDEWEB)

Birchall, A.; Jarvis, N.S.; Peace, M.S.; Riddell, A.E.; Battersby, W.P

1998-07-01

The increasing complexity of models representing the biokinetic behaviour of radionuclides in the body following intake poses problems for people who are required to implement these models. The problem is exacerbated by the current paucity of suitable software. In order to remedy this situation, a collaboration between British Nuclear Fuels, Westlakes Research Institute and the National Radiological Protection Board has started with the aim of producing a suite of modules for estimating intakes and doses from bioassay measurements using the new ICRP models. Each module will have a single purpose (e.g. to calculate respiratory tract deposition) and will interface with other software using data files. The elements to be implemented initially are plutonium, uranium, caesium, iodine and tritium. It is intended to make the software available to other parties under terms yet to be decided. This paper describes the proposed suite of integrated modules for bioassay analysis, IMBA. (author)

Isotopic variation in the Tuolumne Intrusive Suite, central Sierra Nevada, California

Science.gov (United States)

Kistler, R.W.; Chappell, B.W.; Peck, D.L.; Bateman, P.C.

1986-01-01

Granitoid rocks of the compositionally zoned Late Cretaceous Toulumne Intrusive Suite in the central Sierra Nevada, California, have initial87Sr/86Sr values (Sri) and143Nd/144Nd values (Ndi) that vary from 0.7057 to 0.7067 and from 0.51239 to 0.51211 respectively. The observed variation of both Sri and Ndi and of chemical composition in rocks of the suite cannot be due to crystal fractionation of magma solely under closed system conditons. The largest variation in chemistry, Ndi, and Sri is present in the outer-most equigranular units of the Tuolumne Intrusive Suite. Sri varies positively with SiO2, Na2O, K2O, and Rb concentrations, and negatively with Ndi, Al2O3, Fe2O3, MgO, FeO, CaO, MnO, P2O5, TiO2, and Sr concentrations. This covariation of Sri, Ndi and chemistry can be modeled by a process of simple mixing of basaltic and granitic magmas having weight percent SiO2 of 48.0 and 73.3 respectively. Isotopic characteristic of the mafic magma are Sri=0.7047, Ndi=0.51269 and ??18O=6.0, and of the felsic magma are Sri=0.7068, Ndi=0.51212 and ??18O=8.9. The rocks sampled contain from 50 to 80% of the felsic component. An aplite in the outer equigranular unit of the Tuolumne Intrusive Suite apparently was derived by fractional crystallization of plagioclase and hornblende from magma with granudiorite composition that was a product of mixing of the magmas described above. Siliceous magmas derived from the lower crust, having a maximum of 15 percent mantle-derived mafic component, are represented by the inner prophyritic units of the Tuolumne Intrusive Suite. ?? 1986 Springer-Verlag.

Abstract Expression Grammar Symbolic Regression

Science.gov (United States)

Korns, Michael F.

This chapter examines the use of Abstract Expression Grammars to perform the entire Symbolic Regression process without the use of Genetic Programming per se. The techniques explored produce a symbolic regression engine which has absolutely no bloat, which allows total user control of the search space and output formulas, which is faster, and more accurate than the engines produced in our previous papers using Genetic Programming. The genome is an all vector structure with four chromosomes plus additional epigenetic and constraint vectors, allowing total user control of the search space and the final output formulas. A combination of specialized compiler techniques, genetic algorithms, particle swarm, aged layered populations, plus discrete and continuous differential evolution are used to produce an improved symbolic regression sytem. Nine base test cases, from the literature, are used to test the improvement in speed and accuracy. The improved results indicate that these techniques move us a big step closer toward future industrial strength symbolic regression systems.

Multivariate Cross-Classification: Applying machine learning techniques to characterize abstraction in neural representations

Directory of Open Access Journals (Sweden)

Jonas eKaplan

2015-03-01

Full Text Available Here we highlight an emerging trend in the use of machine learning classifiers to test for abstraction across patterns of neural activity. When a classifier algorithm is trained on data from one cognitive context, and tested on data from another, conclusions can be drawn about the role of a given brain region in representing information that abstracts across those cognitive contexts. We call this kind of analysis Multivariate Cross-Classification (MVCC, and review several domains where it has recently made an impact. MVCC has been important in establishing correspondences among neural patterns across cognitive domains, including motor-perception matching and cross-sensory matching. It has been used to test for similarity between neural patterns evoked by perception and those generated from memory. Other work has used MVCC to investigate the similarity of representations for semantic categories across different kinds of stimulus presentation, and in the presence of different cognitive demands. We use these examples to demonstrate the power of MVCC as a tool for investigating neural abstraction and discuss some important methodological issues related to its application.

A Modal-Logic Based Graph Abstraction

NARCIS (Netherlands)

Bauer, J.; Boneva, I.B.; Kurban, M.E.; Rensink, Arend; Ehrig, H; Heckel, R.; Rozenberg, G.; Taentzer, G.

2008-01-01

Infinite or very large state spaces often prohibit the successful verification of graph transformation systems. Abstract graph transformation is an approach that tackles this problem by abstracting graphs to abstract graphs of bounded size and by lifting application of productions to abstract

Segane saksa-eesti kirjakeel ja eesti lauluraamat / Gustav Suits

Index Scriptorium Estoniae

Suits, Gustav, 1883-1956

1999-01-01

Varem ilmunud: Suits, Gustav. Eesti kirjanduslugu I. Lund : Eesti Kirjanike Kooperatiiv, 1953. Heinrich Stahli käsiraamatu Hand-, Hausz- und Kirchenbuch (1654-1656) osana ilmunud lauluraamatust Neu Ehstnisches Gesangbuch (1656)

Assuring Condition and Inventory Accountability of Chemical Protective Suits

National Research Council Canada - National Science Library

2000-01-01

.... As part of the Defense Logistics Agency's efforts to consolidate depot operations and improve inventory accuracy, chemical protective suits were transferred to the Defense Depot, Albany, Georgia, during FY 1991.

Evidence for cross-script abstract identities in learners of Japanese kana.

Science.gov (United States)

Schubert, Teresa; Gawthrop, Roderick; Kinoshita, Sachiko

2018-05-07

The presence of abstract letter identity representations in the Roman alphabet has been well documented. These representations are invariant to letter case (upper vs. lower) and visual appearance. For example, "a" and "A" are represented by the same abstract identity. Recent research has begun to consider whether the processing of non-Roman orthographies also involves abstract orthographic representations. In the present study, we sought evidence for abstract identities in Japanese kana, which consist of two scripts, hiragana and katakana. Abstract identities would be invariant to the script used as well as to the degree of visual similarity. We adapted the cross-case masked-priming letter match task used in previous research on Roman letters, by presenting cross-script kana pairs and testing adult beginning -to- intermediate Japanese second-language (L2) learners (first-language English readers). We found robust cross-script priming effects, which were equal in magnitude for visually similar (e.g., り/リ) and dissimilar (e.g., あ/ア) kana pairs. This pattern was found despite participants' imperfect explicit knowledge of the kana names, particularly for katakana. We also replicated prior findings from Roman abstract letter identities in the same participants. Ours is the first study reporting abstract kana identity priming (in adult L2 learners). Furthermore, these representations were acquired relatively early in our adult L2 learners.

Space Suit Simulator (S3) for Partial Gravity EVA Experimentation and Training, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Pressurized space suits impose high joint torques on the wearer, reducing mobility for upper and lower body motions. Using actual space suits in training or...

Seismic Consequence Abstraction

International Nuclear Information System (INIS)

Gross, M.

2004-01-01

The primary purpose of this model report is to develop abstractions for the response of engineered barrier system (EBS) components to seismic hazards at a geologic repository at Yucca Mountain, Nevada, and to define the methodology for using these abstractions in a seismic scenario class for the Total System Performance Assessment - License Application (TSPA-LA). A secondary purpose of this model report is to provide information for criticality studies related to seismic hazards. The seismic hazards addressed herein are vibratory ground motion, fault displacement, and rockfall due to ground motion. The EBS components are the drip shield, the waste package, and the fuel cladding. The requirements for development of the abstractions and the associated algorithms for the seismic scenario class are defined in ''Technical Work Plan For: Regulatory Integration Modeling of Drift Degradation, Waste Package and Drip Shield Vibratory Motion and Seismic Consequences'' (BSC 2004 [DIRS 171520]). The development of these abstractions will provide a more complete representation of flow into and transport from the EBS under disruptive events. The results from this development will also address portions of integrated subissue ENG2, Mechanical Disruption of Engineered Barriers, including the acceptance criteria for this subissue defined in Section 2.2.1.3.2.3 of the ''Yucca Mountain Review Plan, Final Report'' (NRC 2003 [DIRS 163274])

Seismic Consequence Abstraction

Energy Technology Data Exchange (ETDEWEB)

M. Gross

2004-10-25

The primary purpose of this model report is to develop abstractions for the response of engineered barrier system (EBS) components to seismic hazards at a geologic repository at Yucca Mountain, Nevada, and to define the methodology for using these abstractions in a seismic scenario class for the Total System Performance Assessment - License Application (TSPA-LA). A secondary purpose of this model report is to provide information for criticality studies related to seismic hazards. The seismic hazards addressed herein are vibratory ground motion, fault displacement, and rockfall due to ground motion. The EBS components are the drip shield, the waste package, and the fuel cladding. The requirements for development of the abstractions and the associated algorithms for the seismic scenario class are defined in ''Technical Work Plan For: Regulatory Integration Modeling of Drift Degradation, Waste Package and Drip Shield Vibratory Motion and Seismic Consequences'' (BSC 2004 [DIRS 171520]). The development of these abstractions will provide a more complete representation of flow into and transport from the EBS under disruptive events. The results from this development will also address portions of integrated subissue ENG2, Mechanical Disruption of Engineered Barriers, including the acceptance criteria for this subissue defined in Section 2.2.1.3.2.3 of the ''Yucca Mountain Review Plan, Final Report'' (NRC 2003 [DIRS 163274]).

The audio and visual communication systems for suited engineering activities on JET

International Nuclear Information System (INIS)

Pearce, R.J.H.; Bruce, J.; Callaghan, C.; Hart, M.; Martin, P.; Middleton, R.; Tait, J.

2001-01-01

The beryllium and/or tritium contamination of the JET tokamak and auxiliary systems necessitates that many activities are carried out in air line fed pressurised suits. To enable often complex engineering activities to be performed, a number of novel audio and visual and communications systems have been designed. The paper describes these systems which give freedom of visual and audio communication between suited personnel, supervisors, operators and engineers. The system enhances the safety of the working environment as well as helping to minimise the radiation dose to personnel. It is concluded, from a number of years experience of using the audio and visual communications systems for suited operations, that safety and the progress of complex engineering tasks have been significantly enhanced

The audio and visual communication systems for suited engineering activities on JET

Energy Technology Data Exchange (ETDEWEB)

Pearce, R.J.H. E-mail: robert.pearce@jet.uk; Bruce, J.; Callaghan, C.; Hart, M.; Martin, P.; Middleton, R.; Tait, J

2001-11-01

The beryllium and/or tritium contamination of the JET tokamak and auxiliary systems necessitates that many activities are carried out in air line fed pressurised suits. To enable often complex engineering activities to be performed, a number of novel audio and visual and communications systems have been designed. The paper describes these systems which give freedom of visual and audio communication between suited personnel, supervisors, operators and engineers. The system enhances the safety of the working environment as well as helping to minimise the radiation dose to personnel. It is concluded, from a number of years experience of using the audio and visual communications systems for suited operations, that safety and the progress of complex engineering tasks have been significantly enhanced.

Benchmark problem suite for reactor physics study of LWR next generation fuels

International Nuclear Information System (INIS)

Yamamoto, Akio; Ikehara, Tadashi; Ito, Takuya; Saji, Etsuro

2002-01-01

This paper proposes a benchmark problem suite for studying the physics of next-generation fuels of light water reactors. The target discharge burnup of the next-generation fuel was set to 70 GWd/t considering the increasing trend in discharge burnup of light water reactor fuels. The UO 2 and MOX fuels are included in the benchmark specifications. The benchmark problem consists of three different geometries: fuel pin cell, PWR fuel assembly and BWR fuel assembly. In the pin cell problem, detailed nuclear characteristics such as burnup dependence of nuclide-wise reactivity were included in the required calculation results to facilitate the study of reactor physics. In the assembly benchmark problems, important parameters for in-core fuel management such as local peaking factors and reactivity coefficients were included in the required results. The benchmark problems provide comprehensive test problems for next-generation light water reactor fuels with extended high burnup. Furthermore, since the pin cell, the PWR assembly and the BWR assembly problems are independent, analyses of the entire benchmark suite is not necessary: e.g., the set of pin cell and PWR fuel assembly problems will be suitable for those in charge of PWR in-core fuel management, and the set of pin cell and BWR fuel assembly problems for those in charge of BWR in-core fuel management. (author)

Modal abstractions of concurrent behavior

DEFF Research Database (Denmark)

Nielson, Flemming; Nanz, Sebastian; Nielson, Hanne Riis

2011-01-01

We present an effective algorithm for the automatic construction of finite modal transition systems as abstractions of potentially infinite concurrent processes. Modal transition systems are recognized as valuable abstractions for model checking because they allow for the validation as well...... as refutation of safety and liveness properties. However, the algorithmic construction of finite abstractions from potentially infinite concurrent processes is a missing link that prevents their more widespread usage for model checking of concurrent systems. Our algorithm is a worklist algorithm using concepts...... from abstract interpretation and operating upon mappings from sets to intervals in order to express simultaneous over- and underapprox-imations of the multisets of process actions available in a particular state. We obtain a finite abstraction that is 3-valued in both states and transitions...

Touring the Tomato: A Suite of Chemistry Laboratory Experiments

Science.gov (United States)

Sarkar, Sayantani; Chatterjee, Subhasish; Medina, Nancy; Stark, Ruth E.

2013-01-01

An eight-session interdisciplinary laboratory curriculum has been designed using a suite of analytical chemistry techniques to study biomaterials derived from an inexpensive source such as the tomato fruit. A logical

Improved airline-type supplied-air plastic suit. [For personnel protection against inhalation of airborne plutonium and tritium

Energy Technology Data Exchange (ETDEWEB)

Jolley, L. Jr.; Zippler, D.B.; Cofer, C.H.; Harper, J.A.

1978-06-01

Two piece supplied-air plastic suits are used extensively at the Savannah River Plant for personnel protection against inhalation of airborne plutonium and tritium. Worker comfort and noise level problems gave impetus to development of an improved suit and aid distribution system. The resulting plastic suit and development work are discussed. The plastic suit unit cost is less than $20, the hearing zone noise level is less than 75 dBA, protection factors exceed 10,000, and user comfort is approved. This suit is expected to meet performance requirements for unrestricted use.

The deleuzian abstract machines

DEFF Research Database (Denmark)

Werner Petersen, Erik

2005-01-01

To most people the concept of abstract machines is connected to the name of Alan Turing and the development of the modern computer. The Turing machine is universal, axiomatic and symbolic (E.g. operating on symbols). Inspired by Foucault, Deleuze and Guattari extended the concept of abstract...

Typesafe Abstractions for Tensor Operations

OpenAIRE

Chen, Tongfei

2017-01-01

We propose a typesafe abstraction to tensors (i.e. multidimensional arrays) exploiting the type-level programming capabilities of Scala through heterogeneous lists (HList), and showcase typesafe abstractions of common tensor operations and various neural layers such as convolution or recurrent neural networks. This abstraction could lay the foundation of future typesafe deep learning frameworks that runs on Scala/JVM.

Development of abstract mathematical reasoning: the case of algebra.

Science.gov (United States)

Susac, Ana; Bubic, Andreja; Vrbanc, Andrija; Planinic, Maja

2014-01-01

Algebra typically represents the students' first encounter with abstract mathematical reasoning and it therefore causes significant difficulties for students who still reason concretely. The aim of the present study was to investigate the developmental trajectory of the students' ability to solve simple algebraic equations. 311 participants between the ages of 13 and 17 were given a computerized test of equation rearrangement. Equations consisted of an unknown and two other elements (numbers or letters), and the operations of multiplication/division. The obtained results showed that younger participants are less accurate and slower in solving equations with letters (symbols) than those with numbers. This difference disappeared for older participants (16-17 years), suggesting that they had reached an abstract reasoning level, at least for this simple task. A corresponding conclusion arises from the analysis of their strategies which suggests that younger participants mostly used concrete strategies such as inserting numbers, while older participants typically used more abstract, rule-based strategies. These results indicate that the development of algebraic thinking is a process which unfolds over a long period of time. In agreement with previous research, we can conclude that, on average, children at the age of 15-16 transition from using concrete to abstract strategies while solving the algebra problems addressed within the present study. A better understanding of the timing and speed of students' transition from concrete arithmetic reasoning to abstract algebraic reasoning might help in designing better curricula and teaching materials that would ease that transition.

Beauty in abstract paintings: perceptual contrast and statistical properties

Science.gov (United States)

Mallon, Birgit; Redies, Christoph; Hayn-Leichsenring, Gregor U.

2014-01-01

In this study, we combined the behavioral and objective approach in the field of empirical aesthetics. First, we studied the perception of beauty by investigating shifts in evaluation on perceived beauty of abstract artworks (Experiment 1). Because the participants showed heterogeneous individual preferences for the paintings, we divided them into seven clusters for the test. The experiment revealed a clear pattern of perceptual contrast. The perceived beauty of abstract paintings increased after exposure to paintings that were rated as less beautiful, and it decreased after exposure to paintings that were rated as more beautiful. Next, we searched for correlations of beauty ratings and perceptual contrast with statistical properties of abstract artworks (Experiment 2). The participants showed significant preferences for particular image properties. These preferences differed between the clusters of participants. Strikingly, next to color measures like hue, saturation, value and lightness, the recently described Pyramid of Histograms of Orientation Gradients (PHOG) self-similarity value seems to be a predictor for aesthetic appreciation of abstract artworks. We speculate that the shift in evaluation in Experiment 1 was, at least in part, based on low-level adaptation to some of the statistical image properties analyzed in Experiment 2. In conclusion, our findings demonstrate that the perception of beauty in abstract artworks is altered after exposure to beautiful or non-beautiful images and correlates with particular image properties, especially color measures and self-similarity. PMID:24711791

Inventory Abstraction

International Nuclear Information System (INIS)

Leigh, C.

2000-01-01

The purpose of the inventory abstraction as directed by the development plan (CRWMS M and O 1999b) is to: (1) Interpret the results of a series of relative dose calculations (CRWMS M and O 1999c, 1999d). (2) Recommend, including a basis thereof, a set of radionuclides that should be modeled in the Total System Performance Assessment in Support of the Site Recommendation (TSPA-SR) and the Total System Performance Assessment in Support of the Final Environmental Impact Statement (TSPA-FEIS). (3) Provide initial radionuclide inventories for the TSPA-SR and TSPA-FEIS models. (4) Answer the U.S. Nuclear Regulatory Commission (NRC)'s Issue Resolution Status Report ''Key Technical Issue: Container Life and Source Term'' (CLST IRSR) (NRC 1999) key technical issue (KTI): ''The rate at which radionuclides in SNF [Spent Nuclear Fuel] are released from the EBS [Engineered Barrier System] through the oxidation and dissolution of spent fuel'' (Subissue 3). The scope of the radionuclide screening analysis encompasses the period from 100 years to 10,000 years after the potential repository at Yucca Mountain is sealed for scenarios involving the breach of a waste package and subsequent degradation of the waste form as required for the TSPA-SR calculations. By extending the time period considered to one million years after repository closure, recommendations are made for the TSPA-FEIS. The waste forms included in the inventory abstraction are Commercial Spent Nuclear Fuel (CSNF), DOE Spent Nuclear Fuel (DSNF), High-Level Waste (HLW), naval Spent Nuclear Fuel (SNF), and U.S. Department of Energy (DOE) plutonium waste. The intended use of this analysis is in TSPA-SR and TSPA-FEIS. Based on the recommendations made here, models for release, transport, and possibly exposure will be developed for the isotopes that would be the highest contributors to the dose given a release to the accessible environment. The inventory abstraction is important in assessing system performance because

Abstracting ICU Nursing Care Quality Data From the Electronic Health Record.

Science.gov (United States)

Seaman, Jennifer B; Evans, Anna C; Sciulli, Andrea M; Barnato, Amber E; Sereika, Susan M; Happ, Mary Beth

2017-09-01

The electronic health record is a potentially rich source of data for clinical research in the intensive care unit setting. We describe the iterative, multi-step process used to develop and test a data abstraction tool, used for collection of nursing care quality indicators from the electronic health record, for a pragmatic trial. We computed Cohen's kappa coefficient (κ) to assess interrater agreement or reliability of data abstracted using preliminary and finalized tools. In assessing the reliability of study data ( n = 1,440 cases) using the finalized tool, 108 randomly selected cases (10% of first half sample; 5% of last half sample) were independently abstracted by a second rater. We demonstrated mean κ values ranging from 0.61 to 0.99 for all indicators. Nursing care quality data can be accurately and reliably abstracted from the electronic health records of intensive care unit patients using a well-developed data collection tool and detailed training.

Towards Identify Selective Antibacterial Peptides Based on Abstracts Meaning

Directory of Open Access Journals (Sweden)

Liliana I. Barbosa-Santillán

2016-01-01

Full Text Available We present an Identify Selective Antibacterial Peptides (ISAP approach based on abstracts meaning. Laboratories and researchers have significantly increased the report of their discoveries related to antibacterial peptides in primary publications. It is important to find antibacterial peptides that have been reported in primary publications because they can produce antibiotics of different generations that attack and destroy the bacteria. Unfortunately, researchers used heterogeneous forms of natural language to describe their discoveries (sometimes without the sequence of the peptides. Thus, we propose that learning the words meaning instead of the antibacterial peptides sequence is possible to identify and predict antibacterial peptides reported in the PubMed engine. The ISAP approach consists of two stages: training and discovering. ISAP founds that the 35% of the abstracts sample had antibacterial peptides and we tested in the updated Antimicrobial Peptide Database 2 (APD2. ISAP predicted that 45% of the abstracts had antibacterial peptides. That is, ISAP found that 810 antibacterial peptides were not classified like that, so they are not reported in APD2. As a result, this new search tool would complement the APD2 with a set of peptides that are candidates to be antibacterial. Finally, 20% of the abstracts were not semantic related to APD2.

Climatic Environmental Test Facilities

Data.gov (United States)

Federal Laboratory Consortium — RTTC has an extensive suite of facilities for supporting MIL-STD-810 testing, toinclude: Temperature/Altitude, Rapid Decompression, Low/High Temperature,Temperature...

28 Résumé Abstract

African Journals Online (AJOL)

SWEET

opérations analytiques ainsi que la réduction de l'échelle de détermination pour la ... majoritairement de deux monosaccharides, le fructose et le glucose dont les teneurs ... Les techniques de HPLC qui se sont développés par la suite se sont ...

Naming a Lego world. The role of language in the acquisition of abstract concepts.

Science.gov (United States)

Granito, Carmen; Scorolli, Claudia; Borghi, Anna Maria

2015-01-01

While embodied approaches of cognition have proved to be successful in explaining concrete concepts and words, they have more difficulties in accounting for abstract concepts and words, and several proposals have been put forward. This work aims to test the Words As Tools proposal, according to which both abstract and concrete concepts are grounded in perception, action and emotional systems, but linguistic information is more important for abstract than for concrete concept representation, due to the different ways they are acquired: while for the acquisition of the latter linguistic information might play a role, for the acquisition of the former it is instead crucial. We investigated the acquisition of concrete and abstract concepts and words, and verified its impact on conceptual representation. In Experiment 1, participants explored and categorized novel concrete and abstract entities, and were taught a novel label for each category. Later they performed a categorical recognition task and an image-word matching task to verify a) whether and how the introduction of language changed the previously formed categories, b) whether language had a major weight for abstract than for concrete words representation, and c) whether this difference had consequences on bodily responses. The results confirm that, even though both concrete and abstract concepts are grounded, language facilitates the acquisition of the latter and plays a major role in their representation, resulting in faster responses with the mouth, typically associated with language production. Experiment 2 was a rating test aiming to verify whether the findings of Experiment 1 were simply due to heterogeneity, i.e. to the fact that the members of abstract categories were more heterogeneous than those of concrete categories. The results confirmed the effectiveness of our operationalization, showing that abstract concepts are more associated with the mouth and concrete ones with the hand, independently from

Naming a Lego world. The role of language in the acquisition of abstract concepts.

Directory of Open Access Journals (Sweden)

Carmen Granito

Full Text Available While embodied approaches of cognition have proved to be successful in explaining concrete concepts and words, they have more difficulties in accounting for abstract concepts and words, and several proposals have been put forward. This work aims to test the Words As Tools proposal, according to which both abstract and concrete concepts are grounded in perception, action and emotional systems, but linguistic information is more important for abstract than for concrete concept representation, due to the different ways they are acquired: while for the acquisition of the latter linguistic information might play a role, for the acquisition of the former it is instead crucial. We investigated the acquisition of concrete and abstract concepts and words, and verified its impact on conceptual representation. In Experiment 1, participants explored and categorized novel concrete and abstract entities, and were taught a novel label for each category. Later they performed a categorical recognition task and an image-word matching task to verify a whether and how the introduction of language changed the previously formed categories, b whether language had a major weight for abstract than for concrete words representation, and c whether this difference had consequences on bodily responses. The results confirm that, even though both concrete and abstract concepts are grounded, language facilitates the acquisition of the latter and plays a major role in their representation, resulting in faster responses with the mouth, typically associated with language production. Experiment 2 was a rating test aiming to verify whether the findings of Experiment 1 were simply due to heterogeneity, i.e. to the fact that the members of abstract categories were more heterogeneous than those of concrete categories. The results confirmed the effectiveness of our operationalization, showing that abstract concepts are more associated with the mouth and concrete ones with the hand

SECIMTools: a suite of metabolomics data analysis tools.

Science.gov (United States)

Kirpich, Alexander S; Ibarra, Miguel; Moskalenko, Oleksandr; Fear, Justin M; Gerken, Joseph; Mi, Xinlei; Ashrafi, Ali; Morse, Alison M; McIntyre, Lauren M

2018-04-20

Metabolomics has the promise to transform the area of personalized medicine with the rapid development of high throughput technology for untargeted analysis of metabolites. Open access, easy to use, analytic tools that are broadly accessible to the biological community need to be developed. While technology used in metabolomics varies, most metabolomics studies have a set of features identified. Galaxy is an open access platform that enables scientists at all levels to interact with big data. Galaxy promotes reproducibility by saving histories and enabling the sharing workflows among scientists. SECIMTools (SouthEast Center for Integrated Metabolomics) is a set of Python applications that are available both as standalone tools and wrapped for use in Galaxy. The suite includes a comprehensive set of quality control metrics (retention time window evaluation and various peak evaluation tools), visualization techniques (hierarchical cluster heatmap, principal component analysis, modular modularity clustering), basic statistical analysis methods (partial least squares - discriminant analysis, analysis of variance, t-test, Kruskal-Wallis non-parametric test), advanced classification methods (random forest, support vector machines), and advanced variable selection tools (least absolute shrinkage and selection operator LASSO and Elastic Net). SECIMTools leverages the Galaxy platform and enables integrated workflows for metabolomics data analysis made from building blocks designed for easy use and interpretability. Standard data formats and a set of utilities allow arbitrary linkages between tools to encourage novel workflow designs. The Galaxy framework enables future data integration for metabolomics studies with other omics data.

Prokofiev: Romeo and Juliet - Suite N1 / Ivan March

Index Scriptorium Estoniae

March, Ivan

1990-01-01

Uuest heliplaadist "Prokofiev: Romeo and Juliet - Suite N1, Op.64b, N2, Op.64c. Philharmonia Orchestra, Barry Wordsworth" Collins Classics cassette 1116-4. CD. Võrreldud Neeme Järvi plaadistustega 1116-2

Failure to exercise due diligence costs plaintiff her suit.

Science.gov (United States)

1997-11-28

The Mississippi State Supreme Court affirmed a lower court ruling dismissing a last-minute suit filed by a plaintiff against United Blood Services of Mississippi and the American Association of Blood Banks. A woman known as D. Doe was a recipient of a tainted transfusion. She contracted HIV in 1983 and died of AIDS-related causes in 1991. Her daughter, the plaintiff, filed a contaminated blood transfusion lawsuit just five days before the statute of limitations ran out but failed to ascertain the correct identity of the blood bank. She named two blood banks in her suit because she was unable to determine the source of the blood. The Supreme Court ruled that waiting until five days before the statute elapsed indicated that the plaintiff did not exercise reasonable diligence within a specific time frame.

An integrated low-voltage rated HTS DC power system with multifunctions to suit smart grids

Energy Technology Data Exchange (ETDEWEB)

Jin, Jian Xun, E-mail: jxjin@uestc.edu.cn [Center of Applied Superconductivity, School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072 (China); Center of Applied Superconductivity and Electrical Engineering, School of Automation Engineering, University of Electronic Science and Technology of China, Chengdu 611731 (China); Chen, Xiao Yuan [School of Engineering, Sichuan Normal University, Chengdu 610101 (China); Qu, Ronghai; Fang, Hai Yang [School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Xin, Ying [Center of Applied Superconductivity, School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072 (China)

2015-03-15

Highlights: • A novel LVDC HTS power transmission network is presented. • An integrated power system is achieved by using HTS DC cable and SMES. • DC superconducting cable is verified to achieve self-acting fault current limitation. • SMES is verified to achieve fast-response buffering effect under a power fluctuation. • SMES is verified to achieve favorable load voltage protection effect under a fault. - Abstract: A low-voltage rated DC power transmission network integrated with superconducting cables (SCs) and superconducting magnetic energy storage (SMES) devices has been studied with analytic results presented. In addition to the properties of loss-less and high current transportation capacity, the effectively integrated system is formed with a self-acting fault current limitation feature of the SC and a buffering effect of the SMES to power fluctuations. The results obtained show that the integrated system can achieve high-quality power transmission under common power fluctuation conditions with an advanced self-protection feature under short circuit conditions, which is identified to suit especially the smart grid applications.

Nuclear medicine. Abstracts; Nuklearmedizin 2000. Abstracts

Energy Technology Data Exchange (ETDEWEB)

Anon.

2000-07-01

This issue of the journal contains the abstracts of the 183 conference papers as well as 266 posters presented at the conference. Subject fields covered are: Neurology, psychology, oncology, pediatrics, radiopharmacy, endocrinology, EDP, measuring equipment and methods, radiological protection, cardiology, and therapy. (orig./CB) [German] Die vorliegende Zeitschrift enthaelt die Kurzfassungen der 183 auf der Tagung gehaltenen Vortraege sowie der 226 praesentierten Poster, die sich mit den folgenden Themen befassten: Neurologie, Psychiatrie, Onkologie, Paediatrie, Radiopharmazie, Endokrinologie, EDV, Messtechnik, Strahlenschutz, Kardiologie sowie Therapie. (MG)

Mechanical Engineering Department technical abstracts

International Nuclear Information System (INIS)

Denney, R.M.

1982-01-01

The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts

Perfectionism, selected demographic and job characteristics as predictors of burnout in operating suite nurses

Directory of Open Access Journals (Sweden)

Dorota Włodarczyk

2013-12-01

Full Text Available Background: The study was aimed at verifying the predictive power of perfectionism for professional burnout among nurses exposed to distress resulting from work in an operating suite and testing whether this effect exists after controlling for selected demographic and job characteristics. Material and Methods: The study group consisted of 100 nurses (93 women; mean age: 38.67 years. The majority in the group worked in public facilities (68%, in duty system (62%, as operating (75% or anesthesiology (25% nurses. To test perfectionism The Polish Adaptive and Maladaptive Perfectionism Questionnaire (AMPQ (Perfekcjonizm Adaptacyjny i Dezadaptacyjny - PAD, developed by Szczucka, was used. To examine burnout the Oldenburg Burnout Inventory (OLBI by Demerouti et al. was adopted. The effects of selected demographic and job characteristics were controlled. Results: The results of hierarchical regression analyses revealed that after controlling for selected demographic and job characteristics maladaptive perfectionism was a significant predictor of disengagement and exhaustion whereas adaptive perfectionism predicted a better work engagement. Significant predictors were also: education, number of workplaces, duty system and marital status. Conclusions: The study allowed to confirm the hypothesis on a harmful role of maladaptive perfectionism in shaping burnout among operating suite nurses. The hypothesis on protective function of adaptive perfectionism was confirmed only partially, with regard to disengagement. The results of the study also highlighted some risk factors of burnout which may exist in this occupational group. This confirms the need to continue research in this area. Med Pr 2013;64(6:761–773

Vibrotactile perception assessment for a haptic interface on an antigravity suit.

Science.gov (United States)

Ko, Sang Min; Lee, Kwangil; Kim, Daeho; Ji, Yong Gu

2017-01-01

Haptic technology is used in various fields to transmit information to the user with or without visual and auditory cues. This study aimed to provide preliminary data for use in developing a haptic interface for an antigravity (anti-G) suit. With the structural characteristics of the anti-G suit in mind, we determined five areas on the body (lower back, outer thighs, inner thighs, outer calves, and inner calves) on which to install ten bar-type eccentric rotating mass (ERM) motors as vibration actuators. To determine the design factors of the haptic anti-G suit, we conducted three experiments to find the absolute threshold, moderate intensity, and subjective assessments of vibrotactile stimuli. Twenty-six fighter pilots participated in the experiments, which were conducted in a fixed-based flight simulator. From the results of our study, we recommend 1) absolute thresholds of ∼11.98-15.84 Hz and 102.01-104.06 dB, 2) moderate intensities of 74.36 Hz and 126.98 dB for the lower back and 58.65 Hz and 122.37 dB for either side of the thighs and calves, and 3) subjective assessments of vibrotactile stimuli (displeasure, easy to perceive, and level of comfort). The results of this study will be useful for the design of a haptic anti-G suit. Copyright © 2016 Elsevier Ltd. All rights reserved.

Publication Rates for Abstracts Presented by Korean Investigators at Major Radiology Meetings

International Nuclear Information System (INIS)

Ha, Tae Ho; Yoon, Dae Young; Goo, Dong Hyun; Chang, Suk Ki; Seo, Young Lan; Yun, Eun Joo; Moon, Jeung Hee; Lee, Yu Jin; Lim, Kyoung Ja; Choi, Chul Soon

2008-01-01

To determine the publication rate of abstracts presented by Korean investigators at national and international radiological meetings, and to identify predictive factors of publication. Abstracts presented at the annual meetings of the Korean Radiological Society (KRS), and abstracts presented by Korean investigators at the annual meetings of the Radiological Society of North America (RSNA) and European Congress of Radiology (ECR) from 2001 to 2002 were searched for subsequent publication, using PubMed and the Korean Medical Database. The following variables were evaluated. 1) The overall publication rate; 2) the publication rates according to the radiological subspecialty, presentation type (oral or poster), sample size (≤ 20, 21 50, or > 50), study design (prospective or retrospective), statistical analysis (present or absent), and study outcome (positive or negative); 3) the time to publication; 4) the journal where the study was published; 5) consistency between the abstract and the final publication. Of 1,097 abstracts, 301 (27.4%) were subsequently published, at an average of 15.8 ± 13.8 months after presentation in 48 journals. The publication rates for studies presented at the RSNA (35.4%) and ECR (50.5%) conferences were significantly higher than that for the KRS conference (23.6%, p < 0.05). Vascular/interventional radiology studies had the highest publication rate (33.1%), whereas musculoskeletal radiology studies had the lowest publication rate (17.1%). Other factors associated with subsequent publication were prospective design, use of statistical testing, and a positive study outcome. The publication rate is significantly lower for the KRS (23.6%) meeting abstracts as compared to those of the RSNA (35.4%) and ECR (50.5%). Prospective design, use of statistical testing, and positive study outcome have a statistically significant effect on the publication rate

Constraint-Based Abstract Semantics for Temporal Logic

DEFF Research Database (Denmark)

Banda, Gourinath; Gallagher, John Patrick

2010-01-01

Abstract interpretation provides a practical approach to verifying properties of infinite-state systems. We apply the framework of abstract interpretation to derive an abstract semantic function for the modal mu-calculus, which is the basis for abstract model checking. The abstract semantic funct...

EBS Radionuclide Transport Abstraction

International Nuclear Information System (INIS)

Schreiner, R.

2001-01-01

The purpose of this work is to develop the Engineered Barrier System (EBS) radionuclide transport abstraction model, as directed by a written development plan (CRWMS M and O 1999a). This abstraction is the conceptual model that will be used to determine the rate of release of radionuclides from the EBS to the unsaturated zone (UZ) in the total system performance assessment-license application (TSPA-LA). In particular, this model will be used to quantify the time-dependent radionuclide releases from a failed waste package (WP) and their subsequent transport through the EBS to the emplacement drift wall/UZ interface. The development of this conceptual model will allow Performance Assessment Operations (PAO) and its Engineered Barrier Performance Department to provide a more detailed and complete EBS flow and transport abstraction. The results from this conceptual model will allow PA0 to address portions of the key technical issues (KTIs) presented in three NRC Issue Resolution Status Reports (IRSRs): (1) the Evolution of the Near-Field Environment (ENFE), Revision 2 (NRC 1999a), (2) the Container Life and Source Term (CLST), Revision 2 (NRC 1999b), and (3) the Thermal Effects on Flow (TEF), Revision 1 (NRC 1998). The conceptual model for flow and transport in the EBS will be referred to as the ''EBS RT Abstraction'' in this analysis/modeling report (AMR). The scope of this abstraction and report is limited to flow and transport processes. More specifically, this AMR does not discuss elements of the TSPA-SR and TSPA-LA that relate to the EBS but are discussed in other AMRs. These elements include corrosion processes, radionuclide solubility limits, waste form dissolution rates and concentrations of colloidal particles that are generally represented as boundary conditions or input parameters for the EBS RT Abstraction. In effect, this AMR provides the algorithms for transporting radionuclides using the flow geometry and radionuclide concentrations determined by other

Article Abstract

African Journals Online (AJOL)

Abstract. Simple learning tools to improve clinical laboratory practical skills training. B Taye, BSc, MPH. Addis Ababa University, College of Health Sciences, Addis Ababa, ... concerns about the competence of medical laboratory science graduates. ... standardised practical learning guides and assessment checklists would.

Water Pollution Abstracts. Volume 43, Number 4, Abstracts 645-849.

Science.gov (United States)

WATER POLLUTION, *ABSTRACTS, PURIFICATION, WASTES(INDUSTRIAL), CONTROL, SEWAGE, WATER SUPPLIES, PUBLIC HEALTH, PETROLEUM PRODUCTS, DEGRADATION, DAMS...ESTUARIES, PLANKTON, PHOTOSYNTHESIS, VIRUSES, SEA WATER , MICROBIOLOGY, UNITED KINGDOM.

Abstraction ability as an indicator of success for learning computing science?

DEFF Research Database (Denmark)

Bennedsen, Jens; Caspersen, Michael Edelgaard

2008-01-01

Computing scientists generally agree that abstract thinking is a crucial component for practicing computer science. We report on a three-year longitudinal study to confirm the hypothesis that general abstraction ability has a positive impact on performance in computing science. Abstraction ability...... is operationalized as stages of cognitive development for which validated tests exist. Performance in computing science is operationalized as grade in the final assessment of ten courses of a bachelor's degree programme in computing science. The validity of the operationalizations is discussed. We have investigated...... the positive impact overall, for two groupings of courses (a content-based grouping and a grouping based on SOLO levels of the courses' intended learning outcome), and for each individual course. Surprisingly, our study shows that there is hardly any correlation between stage of cognitive development...

Metabolic Diet App Suite for inborn errors of amino acid metabolism.

Science.gov (United States)

Ho, Gloria; Ueda, Keiko; Houben, Roderick F A; Joa, Jeff; Giezen, Alette; Cheng, Barbara; van Karnebeek, Clara D M

2016-03-01

An increasing number of rare inborn errors of metabolism (IEMs) are amenable to targeted metabolic nutrition therapy. Daily adherence is important to attain metabolic control and prevent organ damage. This is challenging however, given the lack of information of disorder specific nutrient content of foods, the limited availability and cost of specialty products as well as difficulties in reliable calculation and tracking of dietary intake and targets. To develop apps for all inborn errors of amino acid metabolism for which the mainstay of treatment is a medical diet, and obtain patient and family feedback throughout the process to incorporate this into subsequent versions. The Metabolic Diet App Suite was created with input from health care professionals as a free, user-friendly, online tool for both mobile devices and desktop computers (http://www.metabolicdietapp.org) for 15 different IEMs. General information is provided for each IEM with links to useful online resources. Nutrient information is based on the MetabolicPro™, a North American food database compiled by the Genetic Metabolic Dietitians International (GMDI) Technology committee. After user registration, a personalized dashboard and management plan including specific nutrient goals are created. Each Diet App has a user-friendly interface and the functions include: nutrient intake counts, adding your own foods and homemade recipes and, managing a daily food diary. Patient and family feedback was overall positive and specific suggestions were used to further improve the App Suite. The Metabolic Diet App Suite aids individuals affected by IEMs to track and plan their meals. Future research should evaluate its impact on patient adherence, metabolic control, quality of life and health-related outcomes. The Suite will be updated and expanded to Apps for other categories of IEMs. Finally, this Suite is a support tool only, and does not replace medical/metabolic nutrition professional advice. Copyright �

The ESA's Space Trajectory Analysis software suite

Science.gov (United States)

Ortega, Guillermo

The European Space Agency (ESA) initiated in 2005 an internal activity to develop an open source software suite involving university science departments and research institutions all over the world. This project is called the "Space Trajectory Analysis" or STA. This article describes the birth of STA and its present configuration. One of the STA aims is to promote the exchange of technical ideas, and raise knowledge and competence in the areas of applied mathematics, space engineering, and informatics at University level. Conceived as a research and education tool to support the analysis phase of a space mission, STA is able to visualize a wide range of space trajectories. These include among others ascent, re-entry, descent and landing trajectories, orbits around planets and moons, interplanetary trajectories, rendezvous trajectories, etc. The article explains that STA project is an original idea of the Technical Directorate of ESA. It was born in August 2005 to provide a framework in astrodynamics research at University level. As research and education software applicable to Academia, a number of Universities support this development by joining ESA in leading the development. ESA and Universities partnership are expressed in the STA Steering Board. Together with ESA, each University has a chair in the board whose tasks are develop, control, promote, maintain, and expand the software suite. The article describes that STA provides calculations in the fields of spacecraft tracking, attitude analysis, coverage and visibility analysis, orbit determination, position and velocity of solar system bodies, etc. STA implements the concept of "space scenario" composed of Solar system bodies, spacecraft, ground stations, pads, etc. It is able to propagate the orbit of a spacecraft where orbital propagators are included. STA is able to compute communication links between objects of a scenario (coverage, line of sight), and to represent the trajectory computations and

Geophysical characterization from Itu intrusive suite

International Nuclear Information System (INIS)

Pascholati, M.E.

1989-01-01

The integrated use of geophysical, geological, geochemical, petrographical and remote sensing data resulted in a substantial increase in the knowledge of the Itu Intrusive Suite. The main geophysical method was gamma-ray spectrometry together with fluorimetry and autoradiography. Three methods were used for calculation of laboratory gamma-ray spectrometry data. For U, the regression method was the best one. For K and Th, equations system and absolute calibration presented the best results. Surface gamma-ray spectrometry allowed comparison with laboratory data and permitted important contribution to the study of environmental radiation. (author)

Statutes of limitations: the special problem of DES suits

International Nuclear Information System (INIS)

Feigin, C.A.

1981-01-01

In 1971, medical studies determined that DES causes a rare type of vaginal cancer in a small number of daughters of mothers who took DES during pregnancy. Subsequently, medical studies determined that exposure to DES can cause other vaginal abnormalities in the daughters, some of which may be precancerous. As a result of these discoveries, many lawsuits have been filed by these daughters against DES manufacturers. Many DES suits may be barred by statutes of limitations, both because the number of years between the daughters' exposure to DES in utero and the discovery that DES can cause injuries exceeds the statutory period, and because the cancer or other injuries caused by DES may not develop for many additional years. This Note discusses two methods that DES plaintiffs may be able to use to overcome the potential statutes of limitations bar: the discovery rule, and state provisions which toll the statute of limitations for minors. The Note contends that courts should apply an expanded discovery rule to DES suits to avoid the unfair result of barring a claim before the plaintiff could have known that she had a cause of action. In addition, the Note argues that the injury which causes the statute of limitations to begin to run in DES suits should not be rigidly defined. Finally, the Note urges that courts allow eligible DES plaintiffs to take advantage of applicable state provisions that toll the statute of limitations for minors

Miniature Flexible Humidity Sensitive Patches for Space Suits, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Advanced space suit technologies demand improved, simplified, long-life regenerative sensing technologies, including humidity sensors, that exceed the performance of...

CAMEO (Computer-Aided Management of Emergency Operations) Software Suite

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — CAMEO is the umbrella name for a system of software applications used widely to plan for and respond to chemical emergencies. All of the programs in the suite work...

Arensky. Silhouettes (Suite N 2), Op. 23 / Jonathan Swain

Index Scriptorium Estoniae

Swain, Jonathan

1991-01-01

Uuest heliplaadist "Arensky. Silhouettes (Suite N 2), Op. 23. Scrjabin. Symphony N 3 in C minor, Op. 43 "Le divin poeme". Danish National Radio Symphony Orchestra. Neeme Järvi. Chandos cassette ABTD 1509; CD CHAN 8898 (66 minutes)

Rimsky-Korsakov: Symphony N2 (Symphonic Suite) / Warrack, John

Index Scriptorium Estoniae

Warrack, John

1990-01-01

Uuest heliplaadist "Rimsky-Korsakov: Symphony N2 (Symphonic Suite), Op. 9, "Antar" Russian Easter Festival Overture, Op.36. Philharmonia Orchestra, Evgeni Svetlanov. Hyperion KA 66399. CDA 66399. Teise sümfoonia esitust võrreldud Neeme Järvi plaadistusega

Toxic Industrial Chemical Tests of Resistance to Permeation by Protective Suits

National Research Council Canada - National Science Library

Klemperer, Elizabeth

2005-01-01

A Natick program to select and test protective materials for soldiers and first responders who face a threat from chemical accidents or terrorist attacks was applied under Congressional legislation...

INVENTORY ABSTRACTION

International Nuclear Information System (INIS)

Ragan, G.

2001-01-01

The purpose of the inventory abstraction, which has been prepared in accordance with a technical work plan (CRWMS M andO 2000e for/ICN--02 of the present analysis, and BSC 2001e for ICN 03 of the present analysis), is to: (1) Interpret the results of a series of relative dose calculations (CRWMS M andO 2000c, 2000f). (2) Recommend, including a basis thereof, a set of radionuclides that should be modeled in the Total System Performance Assessment in Support of the Site Recommendation (TSPA-SR) and the Total System Performance Assessment in Support of the Final Environmental Impact Statement (TSPA-FEIS). (3) Provide initial radionuclide inventories for the TSPA-SR and TSPA-FEIS models. (4) Answer the U.S. Nuclear Regulatory Commission (NRC)'s Issue Resolution Status Report ''Key Technical Issue: Container Life and Source Term'' (CLST IRSR) key technical issue (KTI): ''The rate at which radionuclides in SNF [spent nuclear fuel] are released from the EBS [engineered barrier system] through the oxidation and dissolution of spent fuel'' (NRC 1999, Subissue 3). The scope of the radionuclide screening analysis encompasses the period from 100 years to 10,000 years after the potential repository at Yucca Mountain is sealed for scenarios involving the breach of a waste package and subsequent degradation of the waste form as required for the TSPA-SR calculations. By extending the time period considered to one million years after repository closure, recommendations are made for the TSPA-FEIS. The waste forms included in the inventory abstraction are Commercial Spent Nuclear Fuel (CSNF), DOE Spent Nuclear Fuel (DSNF), High-Level Waste (HLW), naval Spent Nuclear Fuel (SNF), and U.S. Department of Energy (DOE) plutonium waste. The intended use of this analysis is in TSPA-SR and TSPA-FEIS. Based on the recommendations made here, models for release, transport, and possibly exposure will be developed for the isotopes that would be the highest contributors to the dose given a release

Astronaut Anna Fisher Suits Up for NBS Training

Science.gov (United States)

1980-01-01

The Hubble Space Telescope (HST) is a cooperative program of the European Space Agency (ESA) and the National Aeronautical and Space Administration (NASA) to operate a long-lived space-based observatory. It was the flagship mission of NASA's Great Observatories program. The HST program began as an astronomical dream in the 1940s. During the 1970s and 1980s, the HST was finally designed and built becoming operational in the 1990s. The HST was deployed into a low-Earth orbit on April 25, 1990 from the cargo bay of the Space Shuttle Discovery (STS-31). The design of the HST took into consideration its length of service and the necessity of repairs and equipment replacement by making the body modular. In doing so, subsequent shuttle missions could recover the HST, replace faulty or obsolete parts and be re-released. Marshall Space Flight Center's (MSFC's) Neutral Buoyancy Simulator (NBS) served as the test center for shuttle astronauts training for Hubble related missions. Shown is astronaut Anna Fisher suiting up for training on a mockup of a modular section of the HST for an axial scientific instrument change out.

Astronaut Anna Fisher Suiting Up For NBS Training

Science.gov (United States)

1980-01-01

The Hubble Space Telescope (HST) is a cooperative program of the European Space Agency (ESA) and the National Aeronautical and Space Administration (NASA) to operate a long-lived space-based observatory. It was the flagship mission of NASA's Great Observatories program. The HST program began as an astronomical dream in the 1940s. During the 1970s and 1980s, the HST was finally designed and built becoming operational in the 1990s. The HST was deployed into a low-Earth orbit on April 25, 1990 from the cargo bay of the Space Shuttle Discovery (STS-31). The design of the HST took into consideration its length of service and the necessity of repairs and equipment replacement by making the body modular. In doing so, subsequent shuttle missions could recover the HST, replace faulty or obsolete parts and be re-released. Marshall Space Flight Center's (MSFC's) Neutral Buoyancy Simulator (NBS) served as the test center for shuttle astronauts training for Hubble related missions. Shown is astronaut Anna Fisher suiting up for training on a mockup of a modular section of the HST for an axial scientific instrument change out.

Astronaut Anna Fisher Suited Up For NBS Training

Science.gov (United States)

1980-01-01

The Hubble Space Telescope (HST) is a cooperative program of the European Space Agency (ESA) and the National Aeronautical and Space Administration (NASA) to operate a long-lived space-based observatory. It was the flagship mission of NASA's Great Observatories program. The HST program began as an astronomical dream in the 1940s. During the 1970s and 1980s, the HST was finally designed and built becoming operational in the 1990s. The HST was deployed into a low-Earth orbit on April 25, 1990 from the cargo bay of the Space Shuttle Discovery (STS-31). The design of the HST took into consideration its length of service and the necessity of repairs and equipment replacement by making the body modular. In doing so, subsequent shuttle missions could recover the HST, replace faulty or obsolete parts and be re-released. Marshall Space Flight Center's (MSFC's) Neutral Buoyancy Simulator (NBS) served as the test center for shuttle astronauts training for Hubble related missions. Shown is astronaut Anna Fisher suited up for training on a mockup of a modular section of the HST for an axial scientific instrument change out.

STS-90 Pilot Scott Altman is suited up for launch

Science.gov (United States)

1998-01-01

STS-90 Pilot Scott Altman is assisted during suit-up activities by Lockheed Suit Technician Valerie McNeil from Johnson Space Center in KSC's Operations and Checkout Building. Altman and the rest of the STS-90 crew will shortly depart for Launch Pad 39B, where the Space Shuttle Columbia awaits a second liftoff attempt at 2:19 p.m. EDT. His first trip into space, Altman is participating in a life sciences research flight that will focus on the most complex and least understood part of the human body - - the nervous system. Neurolab will examine the effects of spaceflight on the brain, spinal cord, peripheral nerves and sensory organs in the human body.

Promoting middle school students’ abstract-thinking ability through cognitive apprenticeship instruction in mathematics learning

Science.gov (United States)

Yusepa, B. G. P.; Kusumah, Y. S.; Kartasasmita, B. G.

2018-01-01

The aim of this study is to get an in-depth understanding of students’ abstract-thinking ability in mathematics learning. This study was an experimental research with pre-test and post-test control group design. The subject of this study was eighth-grade students from two junior high schools in Bandung. In each schools, two parallel groups were selected and assigned into control and experimental groups. The experimental group was exposed to Cognitive Apprenticeship Instruction (CAI) treatment, whereas the control group was exposed to conventional learning. The results showed that abstract-thinking ability of students in experimental group was better than that of those in control group in which it could be observed from the overall and school level. It could be concluded that CAI could be a good alternative learning model to enhance students’ abstract-thinking ability.

Data Abstraction in GLISP.

Science.gov (United States)

Novak, Gordon S., Jr.

GLISP is a high-level computer language (based on Lisp and including Lisp as a sublanguage) which is compiled into Lisp. GLISP programs are compiled relative to a knowledge base of object descriptions, a form of abstract datatypes. A primary goal of the use of abstract datatypes in GLISP is to allow program code to be written in terms of objects,…

Implementing elements of The Physics Suite at a large metropolitan research university

Science.gov (United States)

Efthimiou, Costas; Maronde, Dan; McGreevy, Tim; del Barco, Enrique; McCole, Stefanie

2011-07-01

A key question in physics education is the effectiveness of the teaching methods. A curriculum that has been investigated at the University of Central Florida (UCF) over the last two years is the use of particular elements of The Physics Suite. Select sections of the introductory physics classes at UCF have made use of Interactive Lecture Demonstrations as part of the lecture component of the class. The laboratory component of the class has implemented the RealTime Physics curriculum, again in select sections. The remaining sections have continued with the teaching methods traditionally used. Using pre- and post-semester concept inventory tests, a student survey, student interviews, and a standard for successful completion of the course, the preliminary data indicate improved student learning.

Asteroid Redirect Crewed Mission Space Suit and EVA System Architecture Trade Study

Science.gov (United States)

Bowie, Jonathan T.; Blanco, Raul A.; Watson, Richard D.; Kelly, Cody; Buffington, Jesse; Sipila, Stephanie A.

2014-01-01

This paper discusses the Asteroid Redirect Crewed Mission (ARCM) space suit and Extravehicular Activity (EVA) architecture trade study and the current state of the work to mature the requirements and products to the mission concept review level. The mission requirements and the resulting concept of operations will be discussed. A historical context will be presented as to present the similarities and differences from previous NASA missions. That will set the stage for the trade study where all options for both pressure garment and life support were considered. The rationale for the architecture decisions will then be presented. Since the trade study did identity risks, the subsequent tests and analyses that mitigated the risks will be discussed. Lastly, the current state of the effort will be provided.

Development of Advanced Suite of Deterministic Codes for VHTR Physics Analysis

Energy Technology Data Exchange (ETDEWEB)

Kim, Kang Seog; Cho, J. Y.; Lee, K. H. (and others)

2007-07-15

Advanced Suites of deterministic codes for VHTR physics analysis has been developed for detailed analysis of current and advanced reactor designs as part of a US-ROK collaborative I-NERI project. These code suites include the conventional 2-step procedure in which a few group constants are generated by a transport lattice calculation, and the reactor physics analysis is performed by a 3-dimensional diffusion calculation, and a whole core transport code that can model local heterogeneities directly at the core level. Particular modeling issues in physics analysis of the gas-cooled VHTRs were resolved, which include a double heterogeneity of the coated fuel particles, a neutron streaming in the coolant channels, a strong core-reflector interaction, and large spectrum shifts due to changes of the surrounding environment, temperature and burnup. And the geometry handling capability of the DeCART code were extended to deal with the hexagonal fuel elements of the VHTR core. The developed code suites were validated and verified by comparing the computational results with those of the Monte Carlo calculations for the benchmark problems.

High Temperature Life Testing of 80Ni-20Cr Wire in a Simulated Mars Atmosphere for the Sample Analysis at Mars (SAM) Instrument Suit Gas Processing System (GPS) Carbon Dioxide Scrubber

Science.gov (United States)

Gundersen, Cynthia; Hoffman, Christopher; Munoz, Bruno; Steohenson, Timothy; Thomas, Walter

2008-01-01

In support of the GPS for the SAM instrument suite built by GSFC, a life test facility was developed to test the suitability of 80Ni-20Cr wire, 0.0056 inches in diameter, for use as a heater element for the carbon dioxide scrubber. The wire would be required to operate at 1000 C in order to attain the 800 C required for regeneration of the getter. The wire also would need to operate in the Mars atmosphere, which consists mostly of CO2 at pressures between 4 and 12 torr. Data on the high temperature degradation mechanism of 80Ni-20Cr in low pressure CO2, together with the effects of thermal cycling, were unknown. In addition, the influence of work hardening of the wire during assembly and the potential for catastrophic grain growth also were unknown. Verification of the wire reliability as defined by the mission goals required the construction of a test facility that would accurately simulate the duty cycles in a simulated Mars atmosphere. The experimental set-up, along with the test protocol and results will be described.

High Temperature Life Testing of 80Ni-20Cr Wire in a Simulated Mars Atmosphere for the Sample Analysis at Mars (SAM) Instrument Suite Gas Processing System (GPS) Carbon Dioxide Scrubber

Science.gov (United States)

Hoffman, Christopher; Munoz, Bruno; Gundersen, Cynthia; Thomas, Walter, III; Stephenson, Timothy

2008-01-01

In support of the GPS for the SAM instrument suite built by NASA/GSFC, a life test facility was developed to test the suitability of 80Ni-20Cr alloy wire, 0.0142 cm diameter, for use as a heater element for the carbon dioxide scrubber. The element would be required to operate at 1000 C in order to attain the 800 C required for regeneration of the getter. The element also would need to operate in the Mars atmosphere, which consists mostly of CO2 at pressures between 4 and 12 torr. Data on the high temperature degradation mechanism of 80Ni- 20Cr in low pressure CO2, coupled with the effects of thermal cycling, were unknown. In addition, the influence of work hardening of the wire during assembly and the potential for catastrophic grain growth also were unknown. Verification of the element reliability as defined by the mission goals required the construction of a test facility that would accurately simulate the duty cycles in a simulated Mars atmosphere. The experimental set-up, along with the test protocol and results will be described.

Nuclear code abstracts (1975 edition)

International Nuclear Information System (INIS)

Akanuma, Makoto; Hirakawa, Takashi

1976-02-01

Nuclear Code Abstracts is compiled in the Nuclear Code Committee to exchange information of the nuclear code developments among members of the committee. Enlarging the collection, the present one includes nuclear code abstracts obtained in 1975 through liaison officers of the organizations in Japan participating in the Nuclear Energy Agency's Computer Program Library at Ispra, Italy. The classification of nuclear codes and the format of code abstracts are the same as those in the library. (auth.)

Integrated Instrument Simulator Suites for Earth Science

Science.gov (United States)

Tanelli, Simone; Tao, Wei-Kuo; Matsui, Toshihisa; Hostetler, Chris; Hair, John; Butler, Carolyn; Kuo, Kwo-Sen; Niamsuwan, Noppasin; Johnson, Michael P.; Jacob, Joseph C.;

Salvus: A scalable software suite for full-waveform modelling & inversion

Science.gov (United States)

Afanasiev, M.; Boehm, C.; van Driel, M.; Krischer, L.; Fichtner, A.

2017-12-01

Full-waveform inversion (FWI), whether at the lab, exploration, or planetary scale, requires the cooperation of five principal components. (1) The geometry of the domain needs to be properly discretized and an initial guess of the model parameters must be projected onto it; (2) Large volumes of recorded waveform data must be collected, organized, and processed; (3) Synthetic waveform data must be efficiently and accurately computed through complex domains; (4) Suitable misfit functions and optimization techniques must be used to relate discrepancies in data space to perturbations in the model; and (5) Some form of workflow management must be employed to schedule and run (1) - (4) in the correct order. Each one of these components can represent a formidable technical challenge which redirects energy from the true task at hand: using FWI to extract new information about some underlying continuum.In this presentation we give an overview of the current status of the Salvus software suite, which was introduced to address the challenges listed above. Specifically, we touch on (1) salvus_mesher, which eases the discretization of complex Earth models into hexahedral meshes; (2) salvus_seismo, which integrates with LASIF and ObsPy to streamline the processing and preparation of seismic data; (3) salvus_wave, a high-performance and scalable spectral-element solver capable of simulating waveforms through general unstructured 2- and 3-D domains, and (4) salvus_opt, an optimization toolbox specifically designed for full-waveform inverse problems. Tying everything together, we also discuss (5) salvus_flow: a workflow package designed to orchestrate and manage the rest of the suite. It is our hope that these developments represent a step towards the automation of large-scale seismic waveform inversion, while also lowering the barrier of entry for new applications. We include several examples of Salvus' use in (extra-) planetary seismology, non-destructive testing, and medical

Ergonomic assessment of neck posture in the minimally invasive surgery suite during laparoscopic cholecystectomy.

Science.gov (United States)

van Det, M J; Meijerink, W J H J; Hoff, C; van Veelen, M A; Pierie, J P E N

2008-11-01

With the expanding implementation of minimally invasive surgery, the operating team is confronted with challenges in the field of ergonomics. Visual feedback is derived from a monitor placed outside the operating field. This crossover trial was conducted to evaluate and compare neck posture in relation to monitor position in a dedicated minimally invasive surgery (MIS) suite and a conventional operating room. Assessment of the neck was conducted for 16 surgeons, assisting surgeons, and scrub nurses performing a laparoscopic cholecystectomy in both types of operating room. Flexion and rotation of the cervical spine were measured intraoperatively using a video analysis system. A two-question visual analog scale (VAS) questionnaire was used to evaluate posture in relation to the monitor position. Neck rotation was significantly reduced in the MIS suite for the surgeon (p = 0.018) and the assisting surgeon (p < 0.001). Neck flexion was significantly improved in the MIS suite for the surgeon (p < 0.001) and the scrub nurse (p = 0.018). On the questionnaire, the operating room team scored their posture significantly higher in the MIS suite and also indicated fewer musculoskeletal complaints. The ergonomic quality of the neck posture is significantly improved in the MIS suite for the entire operating room team.

The PAUL Suit(©) : an experience of ageing.

Science.gov (United States)

Bennett, Paul; Moore, Malcolm; Wenham, John

2016-04-01

An ageing population worldwide makes it increasingly important that health students understand issues that elderly people face and can provide empathic care to them. This teaching department in an isolated rural setting developed an interprofessional learning session to assist health students to understand issues of functional loss and social isolation that can affect elderly people. The Premature Ageing Unisex Leisure (PAUL) Suit(©) was developed as part of a 1-day learning session for undergraduate health students - including students of medicine, nursing and allied health - attending clinical placement in far-west New South Wales. The suit was developed locally and can be adjusted to simulate a wide range of functional losses in the wearer. Students undertake a range of daily tasks in the community while wearing the suit in the company of a student 'carer'. Over the past 4 years, approximately 140 students have participated in the simulation. Post-simulation evaluations report that students gain a greater understanding of some functional issues associated with ageing, and of the social isolation that can be associated with these. The experiential nature of the activity leads to some powerful insights. This activity is an innovative, experiential tool to deepen students understanding of issues related to ageing This activity is an innovative, experiential tool to deepen students understanding of issues relating to ageing. The interprofessional nature of the activity is an important factor in the success of the day, and produces a wide range of shared insights. The activity also enhances the partnerships between the university, the health service and the local community. Our experience supports the value of simulation in providing a deep learning opportunity in the area of ageing and disability. © 2015 John Wiley & Sons Ltd.

Sci-Fri AM: Quality, Safety, and Professional Issues 01: CPQR Technical Quality Control Suite Development including Quality Control Workload Results

Energy Technology Data Exchange (ETDEWEB)

Malkoske, Kyle; Nielsen, Michelle; Brown, Erika; Diamond, Kevin; Frenière, Normand; Grant, John; Pomerleau-Dalcourt, Natalie; Schella, Jason; Schreiner, L. John; Tantot, Laurent; Barajas, Eduardo Villareal; Bissonnette, Jean-Pierre [Royal Victoria Hospital, Trillium Health Partners, CPQR, Juravinski Cancer Centre, CIUSSS MCQ - CHAUR, Cape Breton Health Care Complex, Centre d’oncologie Dr. Léon-Richard / Dr. Léon Richard Oncology Centre, QEII Health Sciences Centre, Cancer Centre of Southeastern Ontario, Hôpital Maisonneuve-Rosemont, Tom Baker Cancer Centre, Princess Margaret Cancer Centre (Canada)

2016-08-15

A close partnership between the Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist’s (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) has resulted in the development of a suite of Technical Quality Control (TQC) Guidelines for radiation treatment equipment, that outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. The framework includes consolidation of existing guidelines and/or literature by expert reviewers, structured stages of public review, external field-testing and ratification by COMP. The adopted framework for the development and maintenance of the TQCs ensures the guidelines incorporate input from the medical physics community during development, measures the workload required to perform the QC tests outlined in each TQC, and remain relevant (i.e. “living documents”) through subsequent planned reviews and updates. This presentation will show the Multi-Leaf Linear Accelerator document as an example of how feedback and cross-national work to achieve a robust guidance document. During field-testing, each technology was tested at multiple centres in a variety of clinic environments. As part of the defined feedback, workload data was captured. This lead to average time associated with testing as defined in each TQC document. As a result, for a medium-sized centre comprising 6 linear accelerators and a comprehensive brachytherapy program, we evaluate the physics workload to 1.5 full-time equivalent physicist per year to complete all QC tests listed in this suite.

Sci-Fri AM: Quality, Safety, and Professional Issues 01: CPQR Technical Quality Control Suite Development including Quality Control Workload Results

International Nuclear Information System (INIS)

Malkoske, Kyle; Nielsen, Michelle; Brown, Erika; Diamond, Kevin; Frenière, Normand; Grant, John; Pomerleau-Dalcourt, Natalie; Schella, Jason; Schreiner, L. John; Tantot, Laurent; Barajas, Eduardo Villareal; Bissonnette, Jean-Pierre

2016-01-01

A close partnership between the Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist’s (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) has resulted in the development of a suite of Technical Quality Control (TQC) Guidelines for radiation treatment equipment, that outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. The framework includes consolidation of existing guidelines and/or literature by expert reviewers, structured stages of public review, external field-testing and ratification by COMP. The adopted framework for the development and maintenance of the TQCs ensures the guidelines incorporate input from the medical physics community during development, measures the workload required to perform the QC tests outlined in each TQC, and remain relevant (i.e. “living documents”) through subsequent planned reviews and updates. This presentation will show the Multi-Leaf Linear Accelerator document as an example of how feedback and cross-national work to achieve a robust guidance document. During field-testing, each technology was tested at multiple centres in a variety of clinic environments. As part of the defined feedback, workload data was captured. This lead to average time associated with testing as defined in each TQC document. As a result, for a medium-sized centre comprising 6 linear accelerators and a comprehensive brachytherapy program, we evaluate the physics workload to 1.5 full-time equivalent physicist per year to complete all QC tests listed in this suite.

Rhyacian evolution of the eastern São Luís Craton: petrography, geochemistry and geochronology of the Rosário Suite

Directory of Open Access Journals (Sweden)

Bruna Karine Correa Nogueira

Full Text Available ABSTRACT: The São Luís Cráton comprises an area between northeast Pará state and northwest Maranhão that exposes Paleoproterozoic granitic suites and meta-volcanosedimentary sequences. In the east of this geotectonic unit, about 70 km south of São Luís, there is a portion of the São Luís Craton, represented by the intrusive Rosario Suite (RS. This work is focused on rocks of this suite, including petrographic, lithochemical and geochronological studies to understand the crustal evolution of these granitoid rocks. The rock spectrum varies from tonalitic to granodioritic, quartz dioritic and granitic compositions, and there are partial structural and mineralogical changes related to deformation along transcurrent shear zones. The geochemical studies show granitic metaluminous compositions of the calc-alkaline series with I-type affinity typical of magmatic arc. Rare earth elements show marked fractionation and slight Eu positive or negative anomalies (Eu/Eu* = 0.82 to 1.1. Zircon U-Pb data provided consistent ages of 2165 ± 7 Ma, 2170 ± 7 Ma, 2170 ± 7 Ma, 2161 ± 4 Ma and 2175 ± 8 Ma, dating emplacement of these granitoids as Paleoproterozoic (Rhyacian. Sm-Nd isotopic data provided model ages (TDM of 2.21 to 2.31 Ga with positive values of εNd +1.9 to +3.2 (t = 2.17 Ga, indicating predominantly Rhyacian crustal sources for the parental magmas, similar to those ones found in other areas of the São Luís Craton. The data, integrated with published geological and geochronological information, indicate the occurrence of an important continental crust formation event in this area. The Paleoproterozoic evolution between 2.17 and 2.15 Ga is related to the Transamazonian orogeny. The granitoids of the Rosario Suite represent the main phase of continental arc magmatism that has continuity in other parts of the São Luís Craton and can be correlated with Rhyacian accretionary magmatism in the northwestern portion of the Amazonian Craton that

G SUIT FOR EDUCATION AS AN ENVIRONMENT FOR STUDENTS OF EDUCATIONAL PRACTICES

OpenAIRE

Olena Glazunova; Olena Kuzminska; Tetyana Voloshyna; Taisia Sayapina; Valentyna Korolchuk

2017-01-01

Materials article analyzes the opportunities and benefits of using cloud services G Suite (Google Apps) during the practical training of students. In the course of the study, an e-environment based on G Suit for Education was developed and its use for effective organization of information technology practice training. A model of e-learning environment for organizing group project work in Google Classroom-based training has been built. The design methodology is grounded as one of the most effe...

Two Dual Ion Spectrometer Flight Units of the Fast Plasma Instrument Suite (FPI) for the Magnetospheric Multiscale Mission (MMS)

Science.gov (United States)

Adams, Mitzi

2014-01-01

Two Dual Ion Spectrometer flight units of the Fast Plasma Instrument Suite (FPI) for the Magnetospheric Multiscale Mission (MMS) have returned to MSFC for flight testing. Anticipated to begin on June 30, tests will ensue in the Low Energy Electron and Ion Facility of the Heliophysics and Planetary Science Office (ZP13), managed by Dr. Victoria Coffey of the Natural Environments Branch of the Engineering Directorate (EV44). The MMS mission consists of four identical spacecraft, whose purpose is to study magnetic reconnection in the boundary regions of Earth's magnetosphere.

Abstract representations of associated emotions in the human brain.

Science.gov (United States)

Kim, Junsuk; Schultz, Johannes; Rohe, Tim; Wallraven, Christian; Lee, Seong-Whan; Bülthoff, Heinrich H

2015-04-08

Emotions can be aroused by various kinds of stimulus modalities. Recent neuroimaging studies indicate that several brain regions represent emotions at an abstract level, i.e., independently from the sensory cues from which they are perceived (e.g., face, body, or voice stimuli). If emotions are indeed represented at such an abstract level, then these abstract representations should also be activated by the memory of an emotional event. We tested this hypothesis by asking human participants to learn associations between emotional stimuli (videos of faces or bodies) and non-emotional stimuli (fractals). After successful learning, fMRI signals were recorded during the presentations of emotional stimuli and emotion-associated fractals. We tested whether emotions could be decoded from fMRI signals evoked by the fractal stimuli using a classifier trained on the responses to the emotional stimuli (and vice versa). This was implemented as a whole-brain searchlight, multivoxel activation pattern analysis, which revealed successful emotion decoding in four brain regions: posterior cingulate cortex (PCC), precuneus, MPFC, and angular gyrus. The same analysis run only on responses to emotional stimuli revealed clusters in PCC, precuneus, and MPFC. Multidimensional scaling analysis of the activation patterns revealed clear clustering of responses by emotion across stimulus types. Our results suggest that PCC, precuneus, and MPFC contain representations of emotions that can be evoked by stimuli that carry emotional information themselves or by stimuli that evoke memories of emotional stimuli, while angular gyrus is more likely to take part in emotional memory retrieval. Copyright © 2015 the authors 0270-6474/15/355655-09$15.00/0.

Enrichment Effects of Gestures and Pictures on Abstract Words in a Second Language.

Science.gov (United States)

Repetto, Claudia; Pedroli, Elisa; Macedonia, Manuela

2017-01-01

Laboratory research has demonstrated that multisensory enrichment promotes verbal learning in a foreign language (L2). Enrichment can be done in various ways, e.g., by adding a picture that illustrates the L2 word's meaning or by the learner performing a gesture to the word (enactment). Most studies have tested enrichment on concrete but not on abstract words. Unlike concrete words, the representation of abstract words is deprived of sensory-motor features. This has been addressed as one of the reasons why abstract words are difficult to remember. Here, we ask whether a brief enrichment training by means of pictures and by self-performed gestures also enhances the memorability of abstract words in L2. Further, we explore which of these two enrichment strategies is more effective. Twenty young adults learned 30 novel abstract words in L2 according to three encoding conditions: (1) reading, (2) reading and pairing the novel word to a picture, and (3) reading and enacting the word by means of a gesture. We measured memory performance in free and cued recall tests, as well as in a visual recognition task. Words encoded with gestures were better remembered in the free recall in the native language (L1). When recognizing the novel words, participants made less errors for words encoded with gestures compared to words encoded with pictures. The reaction times in the recognition task did not differ across conditions. The present findings support, even if only partially, the idea that enactment promotes learning of abstract words and that it is superior to enrichment by means of pictures even after short training.

Enrichment Effects of Gestures and Pictures on Abstract Words in a Second Language

Directory of Open Access Journals (Sweden)

Claudia Repetto

2017-12-01

Full Text Available Laboratory research has demonstrated that multisensory enrichment promotes verbal learning in a foreign language (L2. Enrichment can be done in various ways, e.g., by adding a picture that illustrates the L2 word’s meaning or by the learner performing a gesture to the word (enactment. Most studies have tested enrichment on concrete but not on abstract words. Unlike concrete words, the representation of abstract words is deprived of sensory-motor features. This has been addressed as one of the reasons why abstract words are difficult to remember. Here, we ask whether a brief enrichment training by means of pictures and by self-performed gestures also enhances the memorability of abstract words in L2. Further, we explore which of these two enrichment strategies is more effective. Twenty young adults learned 30 novel abstract words in L2 according to three encoding conditions: (1 reading, (2 reading and pairing the novel word to a picture, and (3 reading and enacting the word by means of a gesture. We measured memory performance in free and cued recall tests, as well as in a visual recognition task. Words encoded with gestures were better remembered in the free recall in the native language (L1. When recognizing the novel words, participants made less errors for words encoded with gestures compared to words encoded with pictures. The reaction times in the recognition task did not differ across conditions. The present findings support, even if only partially, the idea that enactment promotes learning of abstract words and that it is superior to enrichment by means of pictures even after short training.

Abstract Interpretation and Attribute Gramars

DEFF Research Database (Denmark)

Rosendahl, Mads

The objective of this thesis is to explore the connections between abstract interpretation and attribute grammars as frameworks in program analysis. Abstract interpretation is a semantics-based program analysis method. A large class of data flow analysis problems can be expressed as non-standard ...... is presented in the thesis. Methods from abstract interpretation can also be used in correctness proofs of attribute grammars. This proof technique introduces a new class of attribute grammars based on domain theory. This method is illustrated with examples....

Testing Real-Time Systems Using UPPAAL

DEFF Research Database (Denmark)

Hessel, Anders; Larsen, Kim Guldstrand; Mikucionis, Marius

2008-01-01

This chapter presents principles and techniques for model-based black-box conformance testing of real-time systems using the Uppaal model-checking tool-suite. The basis for testing is given as a network of concurrent timed automata specified by the test engineer. Relativized input...

Is the Abstract a Mere Teaser? Evaluating Generosity of Article Abstracts in the Environmental Sciences

Directory of Open Access Journals (Sweden)

Liana Ermakova

2018-05-01

Full Text Available An abstract is not only a mirror of the full article; it also aims to draw attention to the most important information of the document it summarizes. Many studies have compared abstracts with full texts for their informativeness. In contrast to previous studies, we propose to investigate this relation based not only on the amount of information given by the abstract but also on its importance. The main objective of this paper is to introduce a new metric called GEM to measure the “generosity” or representativeness of an abstract. Schematically speaking, a generous abstract should have the best possible score of similarity for the sections important to the reader. Based on a questionnaire gathering information from 630 researchers, we were able to weight sections according to their importance. In our approach, seven sections were first automatically detected in the full text. The accuracy of this classification into sections was above 80% compared with a dataset of documents where sentences were assigned to sections by experts. Second, each section was weighted according to the questionnaire results. The GEM score was then calculated as a sum of weights of sections in the full text corresponding to sentences in the abstract normalized over the total sum of weights of sections in the full text. The correlation between GEM score and the mean of the scores assigned by annotators was higher than the correlation between scores from different experts. As a case study, the GEM score was calculated for 36,237 articles in environmental sciences (1930–2013 retrieved from the French ISTEX database. The main result was that GEM score has increased over time. Moreover, this trend depends on subject area and publisher. No correlation was found between GEM score and citation rate or open access status of articles. We conclude that abstracts are more generous in recent publications and cannot be considered as mere teasers. This research should be pursued

Concept of Triangle: Examples of Mathematical Abstraction in Two Different Contexts

Directory of Open Access Journals (Sweden)

Farida Nurhasanah

2017-02-01

Full Text Available In attempt to explain how students learning geometry in concept of triangle, this study explore the learning process of students and the process of solving geometry problems in the topic of triangle.  As known as one of the domain in school of mathematics, geometry has abstract notions to be learnt so that all those notions cannot be just transferred into students’ mind like a bunch of information that should be memorized. Students need to construct those concepts during their learning process. This process of knowledge construction can be considered as an abstraction process. This study aimed to qualitatively compare students’ abstraction process who learn topic of triangle in conventional method of teaching and in van Hiele model of teaching aided by Geometers’ sketchpad. Subjects of this study were junir high school students in grade 7. Based on the aims of this study, this is a qualitative study with grounded theory design. Data were collected through classroom observation, test, and task-based interview. Results of the study show that theoretical abstraction processes tend to dominate classrom with conventional method of teaching while classroom with van Hiele model of teaching aided by Geometers’ sketchpad accommodated empirical abstraction process of the students

Efficient abstraction selection in reinforcement learning

NARCIS (Netherlands)

Seijen, H. van; Whiteson, S.; Kester, L.

2013-01-01

This paper introduces a novel approach for abstraction selection in reinforcement learning problems modelled as factored Markov decision processes (MDPs), for which a state is described via a set of state components. In abstraction selection, an agent must choose an abstraction from a set of

Indico CONFERENCE: Define the Call for Abstracts

CERN Multimedia

CERN. Geneva; Ferreira, Pedro

2017-01-01

In this tutorial, you will learn how to define and open a call for abstracts. When defining a call for abstracts, you will be able to define settings related to the type of questions asked during a review of an abstract, select the users who will review the abstracts, decide when to open the call for abstracts, and more.

Introduction to abstract algebra, solutions manual

CERN Document Server

Nicholson, W Keith

2012-01-01

Praise for the Third Edition ". . . an expository masterpiece of the highest didactic value that has gained additional attractivity through the various improvements . . ."-Zentralblatt MATH The Fourth Edition of Introduction to Abstract Algebra continues to provide an accessible approach to the basic structures of abstract algebra: groups, rings, and fields. The book's unique presentation helps readers advance to abstract theory by presenting concrete examples of induction, number theory, integers modulo n, and permutations before the abstract structures are defined. Readers can immediately be

Nonventing Thermal and Humidity Control for EVA Suits, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Future manned space exploration missions will require space suits with capabilities beyond the current state of the art. Portable Life Support Systems for these...

Dynamic Human-Centered Suit Design: A Computational and Experimental Method

Data.gov (United States)

National Aeronautics and Space Administration — Introduction: Manned space flight necessitates an ability to provide life support to crewmembers during multiple mission stages, in the form of space suits. With...

Abstracts of contributed papers

Energy Technology Data Exchange (ETDEWEB)

1994-08-01

This volume contains 571 abstracts of contributed papers to be presented during the Twelfth US National Congress of Applied Mechanics. Abstracts are arranged in the order in which they fall in the program -- the main sessions are listed chronologically in the Table of Contents. The Author Index is in alphabetical order and lists each paper number (matching the schedule in the Final Program) with its corresponding page number in the book.

The Abstraction Ability in Constructing Relation Within Triangles by The Seventh Grade Students of Junior High School

Science.gov (United States)

Annas, Suwardi; Djadir; Mutmainna Hasma, Sitti

2018-01-01

on is an activity to organize a mathematical concept that has been previously owned into a new mathematical structure. Activites in abstraction are recognizing, organizing and constructing. Recognizing is a process of identifying a mathematical structure that had existed before. Organizing is a process of using structural knowledge to be assembled into a solution of a problem and constructing is a process of organizing the characteristics of the object into a new structure that does not exist. In abstraction process, the students use attributes to address the object, including routine attribute, nonroutine attributes, and meaningless attributes. This research applied descriptive qualitative research which aimed to describe the abstraction ability of students from high, moderate, and low groups to construct a relation within triangle. In collecting the data, this research used students’ pre-ability math test, abstraction test, and guided interview. The sampling technique in this research was based on the students’ scores in pre-ability math test, which were divided into three groups. Two students from each group were opted as the subjects of this research. Questions of the test are based on the indicators of steps in abstraction activity. Thus, based on the data gained in this research, researcher determined the tendency of attributes used in each abstraction activity. The result of this research revealed that students from high, moderate and low groups were prone to use routine attributes in recognizing triangles. In organizing the characteristics within triangles, high group tended to organize the triangle correctly, while the moderate and low groups tended to organize the triangle incorrectly. In constructing relation within triangles, students in high, moderate and low groups construct it incompletely.

Hemispheric asymmetry of liking for representational and abstract paintings.

Science.gov (United States)

Nadal, Marcos; Schiavi, Susanna; Cattaneo, Zaira

2017-10-13

Although the neural correlates of the appreciation of aesthetic qualities have been the target of much research in the past decade, few experiments have explored the hemispheric asymmetries in underlying processes. In this study, we used a divided visual field paradigm to test for hemispheric asymmetries in men and women's preference for abstract and representational artworks. Both male and female participants liked representational paintings more when presented in the right visual field, whereas preference for abstract paintings was unaffected by presentation hemifield. We hypothesize that this result reflects a facilitation of the sort of visual processes relevant to laypeople's liking for art-specifically, local processing of highly informative object features-when artworks are presented in the right visual field, given the left hemisphere's advantage in processing such features.

Test suite for the archiver of a SCADA system

CERN Document Server

Voitier, Axel

2009-01-01

Topic: The group responsible for providing the main control system applications for all machines at CERN has to validate that every piece of the control systems used will be reliable and fully functional when the LHC and its experiments will do collisions of particles. CERN use PVSS from ETM/Siemens for the SCADA part of its control systems. This software has a component dedicated to archive into a centralised Oracle database values and commands of tenth of thousands hardware devices. This component, named RDB, has to be tested and validated in terms of functionality and performance. The need is high for that because archiving is a critical part of the control systems. In case of an incident on one of the machine, it will be unacceptable to not benefit of archiving the machine context at this moment just because of a bug in RDB. Bugs have to be spotted and reported to ETM. Results: The proposed solution is an extensible automatic tester able to evaluate currently around 160 cases of potential bugs. Since the ...

Sibelius: Karelia Suite, Op. 11. Luonnotar, Op. 70 a. Andante festivo. The Oceanides, Op. 73. King Christian II, Op. 27-Suite. Finlandia, Op. 26a. Gothenburg Symphony Orchester, Neeme Järvi / Michael Scott Rohan

Index Scriptorium Estoniae

Rohan, Michael Scott

1996-01-01

Sibelius: Karelia Suite, Op. 11. Luonnotar, Op. 70 a. Andante festivo. The Oceanides, Op. 73. King Christian II, Op. 27-Suite. Finlandia, Op. 26a. Gothenburg Symphony Orchester, Neeme Järvi. 1 CD Deutsche Grammophon 447 760-2GH (72 minutes: DDD)

Advance Organizers: Concret Versus Abstract.

Science.gov (United States)

Corkill, Alice J.; And Others

1988-01-01

Two experiments examined the relative effects of concrete and abstract advance organizers on students' memory for subsequent prose. Results of the experiments are discussed in terms of the memorability, familiarity, and visualizability of concrete and abstract verbal materials. (JD)

ASIM - an Instrument Suite for the International Space Station

DEFF Research Database (Denmark)

Neubert, Torsten; Crosby, B.; Huang, T.-Y.

2009-01-01

ASIM (Atmosphere-Space Interactions Monitor) is an instrument suite for studies of severe thunderstorms and their effects on the atmosphere and ionosphere. The instruments are designed to observe transient luminous events (TLEs)—sprites, blue jets and elves—and terrestrial gamma-ray flashes (TGFs...

Geochemical fingerprinting of ∼2.5 Ga forearc-arc-backarc related magmatic suites in the Bastar Craton, central India

Science.gov (United States)

Asthana, Deepanker; Kumar, Sirish; Vind, Aditya Kumar; Zehra, Fatima; Kumar, Harshavardhan; Pophare, Anil M.

2018-05-01

The Pitepani volcanic suite of the Dongargarh Supergroup, central India comprises of a calc-alkaline suite and a tholeiitic suite, respectively. The rare earth element (REE) patterns, mantle normalized plots and relict clinopyroxene chemistry of the Pitepani calc-alkaline suite are akin to high-Mg andesites (HMA) and reveal remarkable similarity to the Cenozoic Setouchi HMA from Japan. The Pitepani HMAs are geochemically correlated with similar rocks in the Kotri-Dongargarh mobile belt (KDMB) and in the mafic dykes of the Bastar Craton. The rationale behind lithogeochemical correlations are that sanukitic HMAs represent fore-arc volcanism over a very limited period of time, under abnormally high temperature conditions and are excellent regional and tectonic time markers. Furthermore, the tholeiitic suites that are temporally and spatially associated with the HMAs in the KDMB and in the mafic dykes of the Bastar Craton are classified into: (a) a continental back-arc suite that are depleted in incompatible elements, and (b) a continental arc suite that are more depleted in incompatible elements, respectively. The HMA suite, the continental back-arc and continental arc suites are lithogeochemically correlated in the KDMB and in the mafic dykes of the Bastar Craton. The three geochemically distinct Neoarchaean magmatic suites are temporally and spatially related to each other and to an active continental margin. The identification of three active continental margin magmatic suites for the first time, provides a robust conceptual framework to unravel the Neoarchaean geodynamic evolution of the Bastar Craton. We propose an active continental margin along the Neoarchaen KDMB with eastward subduction coupled with slab roll back or preferably, ridge-subduction along the Central Indian Tectonic Zone (CITZ) to account for the three distinct magmatic suites and the Neoarchean geodynamic evolution of the Bastar Craton.

Class association rules mining from students’ test data (Abstract)

NARCIS (Netherlands)

Romero, C.; Ventura, S.; Vasilyeva, E.; Pechenizkiy, M.; Baker, de R.S.J.; Merceron, A.; Pavlik Jr., P.I.

2010-01-01

In this paper we propose the use of a special type of association rules mining for discovering interesting relationships from the students’ test data collected in our case with Moodle learning management system (LMS). Particularly, we apply Class Association Rule (CAR) mining to different data

Fire Technology Abstracts, volume 4, issue 1, August, 1981

Science.gov (United States)

Holtschlag, L. J.; Kuvshinoff, B. W.; Jernigan, J. B.

This bibliography contains over 400 citations with abstracts addressing various aspects of fire technology. Subjects cover the dynamics of fire, behavior and properties of materials, fire modeling and test burns, fire protection, fire safety, fire service organization, apparatus and equipment, fire prevention, suppression, planning, human behavior, medical problems, codes and standards, hazard identification, safe handling of materials, insurance, economics of loss and prevention, and more.

Proceedings: 1995 SERDP Symposium (Abstracts)

Science.gov (United States)

1995-04-01

Clays Compliance-l0 Development of Hydrothermal Reduction of Energetic Wastes Compliance-ll Metal Perovskite Catalysts for NOx Reduction Compliance-12... Perovskite Catalysts for NOx Reduction Dr. Joseph Wander Air Force Armstrong Laboratory, Environics Directorate 139 Barnes Drive, Suite 2 Bldg. 1120...processes involved in facility design, construction, and operation and, 2) to place on the Internet a life cycle assessment database ( LCA ) for building

Hardware-in-the-Loop Testing

Data.gov (United States)

Federal Laboratory Consortium — RTC has a suite of Hardware-in-the Loop facilities that include three operational facilities that provide performance assessment and production acceptance testing of...

How Sustainable is Groundwater Abstraction? A Global Assessment.

Science.gov (United States)

de Graaf, I.; Van Beek, R.; Gleeson, T. P.; Sutanudjaja, E.; Wada, Y.; Bierkens, M. F.

2017-12-01

Groundwater is the world's largest accessible freshwater resource and is of critical importance for irrigation, and thus for global food security. For regions with high demands, groundwater abstractions often exceed recharge and persistent groundwater depletion occurs. The direct effects of depletion are falling groundwater levels, increased pumping costs, land subsidence, and reduced baseflows to rivers. Water demands are expected to increase further due to growing population, economic development, and climate change, posing the urgent question how sustainable current water abstractions are worldwide and where and when these abstractions approach conceivable economic and environmental limits. In this study we estimated trends over 1960-2100 in groundwater levels, resulting from changes in demand and climate. We explored the limits of groundwater abstraction by predicting where and when groundwater levels drop that deep that groundwater gets unattainable for abstraction (economic limit) or, that groundwater baseflows to rivers drop below environmental requirements (environmental limit). We used a global hydrological model coupled to a groundwater model, meaning lateral groundwater flows, river infiltration and drainage, and infiltration and capillary-rise are simulated dynamically. Historical data and projections are used to prescribe water demands and climate forcing to the model. For the near future we used RCP8.5 and applied globally driest, average, and wettest GCM to test climate sensitivity. Results show that in general environmental limits are reached before economic limits, for example starting as early as the 1970s compared to the 1980s for economic limits in the upper Ganges basin. Economic limits are mostly related to regions with depletion, while environmental limits are reached also in regions were groundwater and surface water withdrawals are significant but depletion is not taking place (yet), for example in Spain and Portugal. In the near future

Internal process: what is abstraction and distortion process?

Science.gov (United States)

Fiantika, F. R.; Budayasa, I. K.; Lukito, A.

2018-03-01

Geometry is one of the branch of mathematics that plays a major role in the development of science and technology. Thus, knowing the geometry concept is needed for students from their early basic level of thinking. A preliminary study showed that the elementary students have difficulty in perceiving parallelogram shape in a 2-dimention of a cube drawing as a square shape. This difficulty makes the students can not solve geometrical problems correctly. This problem is related to the internal thinking process in geometry. We conducted the exploration of students’ internal thinking processes in geometry particularly in distinguishing the square and parallelogram shape. How the students process their internal thinking through distortion and abstraction is the main aim of this study. Analysis of the geometrical test and deep interview are used in this study to obtain the data. The result of this study is there are two types of distortion and abstraction respectively in which the student used in their internal thinking processes.

Astronaut Gordon Cooper during flight tests

Science.gov (United States)

1963-01-01

Astronaut L. Gordon Cooper, prime pilot for the Mercury-Atlas 9 mission, relaxes while waiting for weight and balance tests to begin (03974); Cooper prior to entering the Mercury Spacecraft for a series of simulated flight tests. During these tests NASA doctors, engineers and technicians monitor Cooper's performance (03975); Cooper undergoing suit pressurization tests (03976).

Analysis of complex networks using aggressive abstraction.

Energy Technology Data Exchange (ETDEWEB)

Colbaugh, Richard; Glass, Kristin.; Willard, Gerald

2008-10-01

This paper presents a new methodology for analyzing complex networks in which the network of interest is first abstracted to a much simpler (but equivalent) representation, the required analysis is performed using the abstraction, and analytic conclusions are then mapped back to the original network and interpreted there. We begin by identifying a broad and important class of complex networks which admit abstractions that are simultaneously dramatically simplifying and property preserving we call these aggressive abstractions -- and which can therefore be analyzed using the proposed approach. We then introduce and develop two forms of aggressive abstraction: 1.) finite state abstraction, in which dynamical networks with uncountable state spaces are modeled using finite state systems, and 2.) onedimensional abstraction, whereby high dimensional network dynamics are captured in a meaningful way using a single scalar variable. In each case, the property preserving nature of the abstraction process is rigorously established and efficient algorithms are presented for computing the abstraction. The considerable potential of the proposed approach to complex networks analysis is illustrated through case studies involving vulnerability analysis of technological networks and predictive analysis for social processes.

Anesthesia and the pediatric cardiac catheterization suite: a review.

Science.gov (United States)

Lam, Jennifer E; Lin, Erica P; Alexy, Ryan; Aronson, Lori A

2015-02-01

Advances in technology over the last couple of decades have caused a shift in pediatric cardiac catheterization from a primary focus on diagnostics to innovative therapeutic interventions. These improvements allow patients a wider range of nonsurgical options for treatment of congenital heart disease. However, these therapeutic modalities can entail higher risk in an already complex patient population, compounded by the added challenges inherent to the environment of the cardiac catheterization suite. Anesthesiologists caring for children with congenital heart disease must understand not only the pathophysiology of the disease but also the effects the anesthetics and interventions have on the patient in order to provide a safe perioperative course. It is the aim of this article to review the latest catheterization modalities offered to patients with congenital heart disease, describe the unique challenges presented in the cardiac catheterization suite, list the most common complications encountered during catheterization and finally, to review the literature regarding different anesthetic drugs used in the catheterization lab. © 2014 John Wiley & Sons Ltd.

Modeling the Impact of Space Suit Components and Anthropometry on the Center of Mass of a Seated Crewmember

Science.gov (United States)

Blackledge, Christopher; Margerum, Sarah; Ferrer, Mike; Morency, Richard; Rajulu, Sudhakar

2010-01-01

The Crew Impact Attenuation System (CIAS) is the energy-absorbing strut concept that dampens Orion Crew Exploration Vehicle (CEV) landing loads to levels sustainable by the crew. Significant COM variations across suited crew configurations would amplify the inertial effects of the pallet and potentially create unacceptable crew loading during launch and landing. The objective of this study was to obtain data needed for dynamic simulation models by quantifying the effects of posture, suit components, and the expected range of anthropometry on the COM of a seated individual. Several elements are required for the COM calculation of a suited human in a seated position: anthropometry, body segment mass, suit component mass, suit component location relative to the body, and joint angles defining the seated posture. Three-dimensional (3D) human body models, suit mass data, and vector calculus were utilized to compute the COM positions for 12 boundary manikins in two different seated postures. The analysis focused on two objectives: (1) quantify how much the wholebody COM varied from the smallest to largest subject and (2) quantify the effects of the suit components on the overall COM in each seat configuration. The location of the anterior-posterior COM varied across all boundary manikins by about 7 cm, and the vertical COM varied by approximately 9 to 10 cm. The mediolateral COM varied by 1.2 cm from the midline sagittal plane for both seat configurations. The suit components caused an anterior shift of the total COM by approximately 2 cm and a shift to the right along the mediolateral axis of 0.4 cm for both seat configurations. When the seat configuration was in the standard posture the suited vertical COM shifted inferiorly by as much as 1 cm, whereas in the CEV posture the vertical COM had no appreciable change. These general differences were due to the high proportion of suit mass located in the boots and lower legs and their corresponding distance from the body COM

Argonne Code Center: compilation of program abstracts

Energy Technology Data Exchange (ETDEWEB)

Butler, M.K.; DeBruler, M.; Edwards, H.S.

1976-08-01

This publication is the tenth supplement to, and revision of, ANL-7411. It contains additional abstracts and revisions to some earlier abstracts and other pages. Sections of the document are as follows: preface; history and acknowledgements; abstract format; recommended program package contents; program classification guide and thesaurus; and abstract collection. (RWR)

Argonne Code Center: compilation of program abstracts

International Nuclear Information System (INIS)

Butler, M.K.; DeBruler, M.; Edwards, H.S.

1976-08-01

This publication is the tenth supplement to, and revision of, ANL-7411. It contains additional abstracts and revisions to some earlier abstracts and other pages. Sections of the document are as follows: preface; history and acknowledgements; abstract format; recommended program package contents; program classification guide and thesaurus; and abstract collection

Prokofiev: War and Peace - Symphonic Suite (arr. Palmer) / Ivan March

Index Scriptorium Estoniae

March, Ivan

1993-01-01

Uuest heliplaadist "Prokofiev: War and Peace - Symphonic Suite (arr. Palmer), Summer Night, Op. 123. Russian Overture, Op. 72. Philharmonia Orchestra / Neeme Järvi. Chandos ABTD 1598 CHAN9096 (64 minutes:DDD) Igor - Polovtsian Dances

Incremental Approach to the Technology of Test Design for Industrial Projects

Directory of Open Access Journals (Sweden)

P. D. Drobintsev

2014-01-01

Full Text Available The paper presents an approach to effort reduction in developing test suites for industrial software products based on the incremental technology. The main problems to be solved by the incremental technology are full automation design of test scenarios and significant reducing of test explosion. The proposed approach provides solutions to the mentioned problems through joint co-working of a designer and a customer, through the integration of symbolic verification with the automatic generation of test suites; through the usage of an efficient technology with the toolset VRS/TAT.

Abstraction by Set-Membership

DEFF Research Database (Denmark)

Mödersheim, Sebastian Alexander

2010-01-01

The abstraction and over-approximation of protocols and web services by a set of Horn clauses is a very successful method in practice. It has however limitations for protocols and web services that are based on databases of keys, contracts, or even access rights, where revocation is possible, so...... that the set of true facts does not monotonically grow with the transitions. We extend the scope of these over-approximation methods by defining a new way of abstraction that can handle such databases, and we formally prove that the abstraction is sound. We realize a translator from a convenient specification...... language to standard Horn clauses and use the verifier ProVerif and the theorem prover SPASS to solve them. We show by a number of examples that this approach is practically feasible for wide variety of verification problems of security protocols and web services....

Abstract Objects of Verbs

DEFF Research Database (Denmark)

Robering, Klaus

2014-01-01

Verbs do often take arguments of quite different types. In an orthodox type-theoretic framework this results in an extreme polysemy of many verbs. In this article, it is shown that this unwanted consequence can be avoided when a theory of "abstract objects" is adopted according to which these obj......Verbs do often take arguments of quite different types. In an orthodox type-theoretic framework this results in an extreme polysemy of many verbs. In this article, it is shown that this unwanted consequence can be avoided when a theory of "abstract objects" is adopted according to which...... these objects represent non-objectual entities in contexts from which they are excluded by type restrictions. Thus these objects are "abstract'' in a functional rather than in an ontological sense: they function as representatives of other entities but they are otherwise quite normal objects. Three examples...

STS-93 Pilot Ashby suits up before launch

Science.gov (United States)

1999-01-01

In the Operations and Checkout Building during final launch preparations for the second time, STS-93 Pilot Jeffrey S. Ashby waves after donning his launch and entry suit while a suit tech adjusts his boot. After Space Shuttle Columbia's July 20 launch attempt was scrubbed at the T-7 second mark in the countdown, the launch was rescheduled for Thursday, July 22, at 12:28 a.m. EDT. The target landing date is July 26, 1999, at 11:24 p.m. EDT. STS- 93 is a five-day mission primarily to release the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The new telescope is 20 to 50 times more sensitive than any previous X-ray telescope and is expected unlock the secrets of supernovae, quasars and black holes. The STS-93 crew numbers five: Commander Eileen M. Collins, Ashby, and Mission Specialists Stephen A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as commander of a shuttle mission.

Argonne Code Center: compilation of program abstracts

Energy Technology Data Exchange (ETDEWEB)

Butler, M.K.; DeBruler, M.; Edwards, H.S.; Harrison, C. Jr.; Hughes, C.E.; Jorgensen, R.; Legan, M.; Menozzi, T.; Ranzini, L.; Strecok, A.J.

1977-08-01

This publication is the eleventh supplement to, and revision of, ANL-7411. It contains additional abstracts and revisions to some earlier abstracts and other pages. Sections of the complete document ANL-7411 are as follows: preface, history and acknowledgements, abstract format, recommended program package contents, program classification guide and thesaurus, and the abstract collection. (RWR)

Argonne Code Center: compilation of program abstracts

International Nuclear Information System (INIS)

Butler, M.K.; DeBruler, M.; Edwards, H.S.; Harrison, C. Jr.; Hughes, C.E.; Jorgensen, R.; Legan, M.; Menozzi, T.; Ranzini, L.; Strecok, A.J.

1977-08-01

This publication is the eleventh supplement to, and revision of, ANL-7411. It contains additional abstracts and revisions to some earlier abstracts and other pages. Sections of the complete document ANL-7411 are as follows: preface, history and acknowledgements, abstract format, recommended program package contents, program classification guide and thesaurus, and the abstract collection

Abstract concepts in grounded cognition

NARCIS (Netherlands)

Lakens, D.

2010-01-01

When people think about highly abstract concepts, they draw upon concrete experiences to structure their thoughts. For example, black knights in fairytales are evil, and knights in shining armor are good. The sensory experiences black and white are used to represent the abstract concepts of good and

Automated integration of lidar into the LANDFIRE product suite

Science.gov (United States)

Birgit Peterson; Kurtis J. Nelson; Carl Seielstad; Jason Stoker; W. Matt Jolly; Russell Parsons

2015-01-01

Accurate information about three-dimensional canopy structure and wildland fuel across the landscape is necessary for fire behaviour modelling system predictions. Remotely sensed data are invaluable for assessing these canopy characteristics over large areas; lidar data, in particular, are uniquely suited for quantifying three-dimensional canopy structure. Although...

Search for the optimally suited cantilever type for high-frequency MFM

International Nuclear Information System (INIS)

Koblischka, M R; Wei, J D; Kirsch, M; Lessel, M; Pfeifer, R; Brust, M; Hartmann, U; Richter, C; Sulzbach, T

2007-01-01

To optimize the performance of the high-frequency MFM (HF-MFM) technique [1-4], we performed a search for the best suited cantilever type and magnetic material coating. Using a HF-MFM setup with hard disk writer poles as test samples, we carried out HF-MFM imaging at frequencies up to 2 GHz. For HF-MFM, it is an essential ingredient that the tip material can follow the fast switching of the high-frequency fields. In this contribution, we investigated 6 different types of cantilevers (i) the 'standard' MFM tip (Nanoworld Pointprobe) with 30 nm CoCr coating, (ii) a 'SSS' (Nanoworld SuperSharpSilicon TM ) cantilever with a 10 nm CoCr coating, (iii) a (Ni, Zn)-ferrite coated pointprobe tip (iv) a Ba 3 Co 2 Fe 23 O 41 (BCFO) coated pointprobe tip, (v) a low-coercivity NiCo alloy coated tip, and (vi) a permalloy-coated tip

Abstract Representations of Object-Directed Action in the Left Inferior Parietal Lobule.

Science.gov (United States)

Chen, Quanjing; Garcea, Frank E; Jacobs, Robert A; Mahon, Bradford Z

2018-06-01

Prior neuroimaging and neuropsychological research indicates that the left inferior parietal lobule in the human brain is a critical substrate for representing object manipulation knowledge. In the present functional MRI study we used multivoxel pattern analyses to test whether action similarity among objects can be decoded in the inferior parietal lobule independent of the task applied to objects (identification or pantomime) and stimulus format in which stimuli are presented (pictures or printed words). Participants pantomimed the use of objects, cued by printed words, or identified pictures of objects. Classifiers were trained and tested across task (e.g., training data: pantomime; testing data: identification), stimulus format (e.g., training data: word format; testing format: picture) and specific objects (e.g., training data: scissors vs. corkscrew; testing data: pliers vs. screwdriver). The only brain region in which action relations among objects could be decoded across task, stimulus format and objects was the inferior parietal lobule. By contrast, medial aspects of the ventral surface of the left temporal lobe represented object function, albeit not at the same level of abstractness as actions in the inferior parietal lobule. These results suggest compulsory access to abstract action information in the inferior parietal lobe even when simply identifying objects.

Post-collisional magmatism in the central East African Orogen: The Maevarano Suite of north Madagascar

Science.gov (United States)

Goodenough, K.M.; Thomas, Ronald J.; De Waele, B.; Key, R.M.; Schofield, D.I.; Bauer, W.; Tucker, R.D.; Rafahatelo, J.-M.; Rabarimanana, M.; Ralison, A.V.; Randriamananjara, T.

2010-01-01

Late tectonic, post-collisional granite suites are a feature of many parts of the Late Neoproterozoic to Cambrian East African Orogen (EAO), where they are generally attributed to late extensional collapse of the orogen, accompanied by high heat flow and asthenospheric uprise. The Maevarano Suite comprises voluminous plutons which were emplaced in some of the tectonostratigraphic terranes of northern Madagascar, in the central part of the EAO, following collision and assembly during a major orogeny at ca. 550 Ma. The suite comprises three main magmatic phases: a minor early phase of foliated gabbros, quartz diorites, and granodiorites; a main phase of large batholiths of porphyritic granitoids and charnockites; and a late phase of small-scale plutons and sheets of monzonite, syenite, leucogranite and microgranite. The main phase intrusions tend to be massive, but with variably foliated margins. New U-Pb SHRIMP zircon data show that the whole suite was emplaced between ca. 537 and 522 Ma. Geochemically, all the rocks of the suite are enriched in the LILE, especially K, and the LREE, but are relatively depleted in Nb, Ta and the HREE. These characteristics are typical of post-collisional granitoids in the EAO and many other orogenic belts. It is proposed that the Maevarano Suite magmas were derived by melting of sub-continental lithospheric mantle that had been enriched in the LILE during earlier subduction events. The melting occurred during lithospheric delamination, which was associated with extensional collapse of the East African Orogen. ?? 2009 Natural Environment Research Council.

A portable generic elementary function package in Ada and an accurate test suite

Energy Technology Data Exchange (ETDEWEB)

Tang, Ping Tak Peter.

1990-11-01

A comprehensive set of elementary functions has been implemented portably in Ada. The high accuracy of the implementation has been confirmed by rigorous analysis. Moreover, we present new test methods that are efficient and offer a high resolution of 0.005 unit in the last place. These test methods have been implemented portably here and confirm the accuracy of our implemented functions. Reports on the accuracy of other function libraries obtained by our test programs are also presented. 26 refs., 9 tabs.

Tchaikovsky, P.: Orchestral Suite no. 3 op. 55 / Terry Williams

Index Scriptorium Estoniae

Williams, Terry

1996-01-01

Uuest heliplaadist "Tchaikovsky, P.: Orchestral Suite no. 3 op. 55. Francesca di Rimini op. 32. Detroit Symphony Orchestra, Neeme Järvi". Chandos CHAN 9 419, distribution Media 7 (CD: 160F). TT: 1h 09'20"

Ghana Science Abstracts

International Nuclear Information System (INIS)

Entsua-Mensah, C.

2004-01-01

This issue of the Ghana Science Abstracts combines in one publication all the country's bibliographic output in science and technology. The objective is to provide a quick reference source to facilitate the work of information professionals, research scientists, lecturers and policy makers. It is meant to give users an idea of the depth and scope and results of the studies and projects carried out. The scope and coverage comprise research outputs, conference proceedings and periodical articles published in Ghana. It does not capture those that were published outside Ghana. Abstracts reported have been grouped under the following subject areas: Agriculture, Biochemistry, Biodiversity conservation, biological sciences, biotechnology, chemistry, dentistry, engineering, environmental management, forestry, information management, mathematics, medicine, physics, nuclear science, pharmacy, renewable energy and science education

Building Safe Concurrency Abstractions

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann

2014-01-01

Concurrent object-oriented programming in Beta is based on semaphores and coroutines and the ability to define high-level concurrency abstractions like monitors, and rendezvous-based communication, and their associated schedulers. The coroutine mechanism of SIMULA has been generalized into the no......Concurrent object-oriented programming in Beta is based on semaphores and coroutines and the ability to define high-level concurrency abstractions like monitors, and rendezvous-based communication, and their associated schedulers. The coroutine mechanism of SIMULA has been generalized...

A new adaptive testing algorithm for shortening health literacy assessments

Directory of Open Access Journals (Sweden)

Currie Leanne M

2011-08-01

Full Text Available Abstract Background Low health literacy has a detrimental effect on health outcomes, as well as ability to use online health resources. Good health literacy assessment tools must be brief to be adopted in practice; test development from the perspective of item-response theory requires pretesting on large participant populations. Our objective was to develop a novel classification method for developing brief assessment instruments that does not require pretesting on large numbers of research participants, and that would be suitable for computerized adaptive testing. Methods We present a new algorithm that uses principles of measurement decision theory (MDT and Shannon's information theory. As a demonstration, we applied it to a secondary analysis of data sets from two assessment tests: a study that measured patients' familiarity with health terms (52 participants, 60 items and a study that assessed health numeracy (165 participants, 8 items. Results In the familiarity data set, the method correctly classified 88.5% of the subjects, and the average length of test was reduced by about 50%. In the numeracy data set, for a two-class classification scheme, 96.9% of the subjects were correctly classified with a more modest reduction in test length of 35.7%; a three-class scheme correctly classified 93.8% with a 17.7% reduction in test length. Conclusions MDT-based approaches are a promising alternative to approaches based on item-response theory, and are well-suited for computerized adaptive testing in the health domain.

BARTTest: Community-Standard Atmospheric Radiative-Transfer and Retrieval Tests

Science.gov (United States)

Harrington, Joseph; Himes, Michael D.; Cubillos, Patricio E.; Blecic, Jasmina; Challener, Ryan C.

2018-01-01

Atmospheric radiative transfer (RT) codes are used both to predict planetary and brown-dwarf spectra and in retrieval algorithms to infer atmospheric chemistry, clouds, and thermal structure from observations. Observational plans, theoretical models, and scientific results depend on the correctness of these calculations. Yet, the calculations are complex and the codes implementing them are often written without modern software-verification techniques. The community needs a suite of test calculations with analytically, numerically, or at least community-verified results. We therefore present the Bayesian Atmospheric Radiative Transfer Test Suite, or BARTTest. BARTTest has four categories of tests: analytically verified RT tests of simple atmospheres (single line in single layer, line blends, saturation, isothermal, multiple line-list combination, etc.), community-verified RT tests of complex atmospheres, synthetic retrieval tests on simulated data with known answers, and community-verified real-data retrieval tests.BARTTest is open-source software intended for community use and further development. It is available at https://github.com/ExOSPORTS/BARTTest. We propose this test suite as a standard for verifying atmospheric RT and retrieval codes, analogous to the Held-Suarez test for general circulation models. This work was supported by NASA Planetary Atmospheres grant NX12AI69G, NASA Astrophysics Data Analysis Program grant NNX13AF38G, and NASA Exoplanets Research Program grant NNX17AB62G.

Enrichment Effects of Gestures and Pictures on Abstract Words in a Second Language

OpenAIRE

Claudia Repetto; Elisa Pedroli; Manuela Macedonia; Manuela Macedonia

2017-01-01

Laboratory research has demonstrated that multisensory enrichment promotes verbal learning in a foreign language (L2). Enrichment can be done in various ways, e.g., by adding a picture that illustrates the L2 word’s meaning or by the learner performing a gesture to the word (enactment). Most studies have tested enrichment on concrete but not on abstract words. Unlike concrete words, the representation of abstract words is deprived of sensory-motor features. This has been addressed as one of t...

Change-based test selection : An empirical evaluation

NARCIS (Netherlands)

Soetens, Quinten; Demeyer, Serge; Zaidman, A.E.; Perez, Javier

2015-01-01

Regression test selection (i.e., selecting a subset of a given regression test suite) is a problem that has been studied intensely over the last decade. However, with the increasing popularity of developer tests as the driver of the test process, more fine-grained solutions that work well within the

Exploiting the systematic review protocol for classification of medical abstracts.

Science.gov (United States)

Frunza, Oana; Inkpen, Diana; Matwin, Stan; Klement, William; O'Blenis, Peter

2011-01-01

To determine whether the automatic classification of documents can be useful in systematic reviews on medical topics, and specifically if the performance of the automatic classification can be enhanced by using the particular protocol of questions employed by the human reviewers to create multiple classifiers. The test collection is the data used in large-scale systematic review on the topic of the dissemination strategy of health care services for elderly people. From a group of 47,274 abstracts marked by human reviewers to be included in or excluded from further screening, we randomly selected 20,000 as a training set, with the remaining 27,274 becoming a separate test set. As a machine learning algorithm we used complement naïve Bayes. We tested both a global classification method, where a single classifier is trained on instances of abstracts and their classification (i.e., included or excluded), and a novel per-question classification method that trains multiple classifiers for each abstract, exploiting the specific protocol (questions) of the systematic review. For the per-question method we tested four ways of combining the results of the classifiers trained for the individual questions. As evaluation measures, we calculated precision and recall for several settings of the two methods. It is most important not to exclude any relevant documents (i.e., to attain high recall for the class of interest) but also desirable to exclude most of the non-relevant documents (i.e., to attain high precision on the class of interest) in order to reduce human workload. For the global method, the highest recall was 67.8% and the highest precision was 37.9%. For the per-question method, the highest recall was 99.2%, and the highest precision was 63%. The human-machine workflow proposed in this paper achieved a recall value of 99.6%, and a precision value of 17.8%. The per-question method that combines classifiers following the specific protocol of the review leads to better

The Impact of Hydrochloride Heroin on Mental Flexibility, Abstract Reasoning, Impulsivity, and Attention

Directory of Open Access Journals (Sweden)

Zahra Alam Mehrjerdi

2011-04-01

Full Text Available Introduction: Drug addiction could lead to severe impairments in executive and neurocognitive functions but study on the impact of hydrochloride heroin on executive functions has remained in infancy in Iran. The aim of this study was to examine the relationship between addiction to hydrochloride heroin and executive functioning in several cognitive domains including mental flexibility, abstract reasoning, impulsivity, and attention. Methods: A total of 60 cases of young male addicts aged 18 to 21 were recruited from outpatient addiction clinics in Karaj city and were matched with 60 non-drug using controls. A test battery including the Wisconsin Card Sorting Test (WCST, Porteus Maze Test (PMQS, Serial Seven Subtraction Test (SSST, and Color Trails Test (CTT were administered respectively. Results: The patient group showed more problems in impulse control compared with the control group, while mental flexibility, abstract reasoning and attention were not affected. Discussion: The findings indicated that addiction to hydrochloride heroin had a negative effect on impulse control. This issue could reflect the role of impaired inhibitory control on drug-seeking behaviors and relapse. Special treatment programs must be tailored to control impulsivity among addicts to hydrochloride heroin during treatment.

Implementation of Remaining Useful Lifetime Transformer Models in the Fleet-Wide Prognostic and Health Management Suite

International Nuclear Information System (INIS)

Agarwal, Vivek; Lybeck, Nancy J.; Pham, Binh; Rusaw, Richard; Bickford, Randall

2015-01-01

Research and development efforts are required to address aging and reliability concerns of the existing fleet of nuclear power plants. As most plants continue to operate beyond the license life (i.e., towards 60 or 80 years), plant components are more likely to incur age-related degradation mechanisms. To assess and manage the health of aging plant assets across the nuclear industry, the Electric Power Research Institute has developed a web-based Fleet-Wide Prognostic and Health Management (FW-PHM) Suite for diagnosis and prognosis. FW-PHM is a set of web-based diagnostic and prognostic tools and databases, comprised of the Diagnostic Advisor, the Asset Fault Signature Database, the Remaining Useful Life Advisor, and the Remaining Useful Life Database, that serves as an integrated health monitoring architecture. The main focus of this paper is the implementation of prognostic models for generator step-up transformers in the FW-PHM Suite. One prognostic model discussed is based on the functional relationship between degree of polymerization, (the most commonly used metrics to assess the health of the winding insulation in a transformer) and furfural concentration in the insulating oil. The other model is based on thermal-induced degradation of the transformer insulation. By utilizing transformer loading information, established thermal models are used to estimate the hot spot temperature inside the transformer winding. Both models are implemented in the Remaining Useful Life Database of the FW-PHM Suite. The Remaining Useful Life Advisor utilizes the implemented prognostic models to estimate the remaining useful life of the paper winding insulation in the transformer based on actual oil testing and operational data.

Implementing Sentinels in the TARGIT BI Suite

DEFF Research Database (Denmark)

Middelfart, Morten; Pedersen, Torben Bach

2011-01-01

This paper describes the implementation of socalled sentinels in the TARGIT BI Suite. Sentinels are a novel type of rules that can warn a user if one or more measure changes in a multi-dimensional data cube are expected to cause a change to another measure critical to the user. Sentinels notify u...... pattern mining or correlation techniques. We demonstrate, through extensive experiments, that mining and usage of sentinels is feasible with good performance for the typical users on a real, operational data warehouse....

ANALYSIS OF DESIGN ELEMENTS IN SKI SUITS

OpenAIRE

Çileroğlu, Birsen; Kelleci Özeren, Figen; Kıvılcımlar, İnci Seda

2015-01-01

Popularity of Ski Sport in 19th century necessitated a new perspective on protective skiing clothing against the mountain climates and excessive cold. Winter clothing were the basis of ski attire during this period.  By the beginning of 20th century lining cloth were used to minimize the wind effect. The difference between the men and women’s ski attire of the time consisted of a knee-length skirts worn over the golf trousers.  Subsequent to the First World War, skiing suit models were influe...

Testing iOS apps with HadoopUnit rapid distributed GUI testing

CERN Document Server

Tilley, Scott

2014-01-01

Smartphone users have come to expect high-quality apps. This has increased the importance of software testing in mobile software development. Unfortunately, testing apps-particularly the GUI-can be very time-consuming. Exercising every user interface element and verifying transitions between different views of the app under test quickly becomes problematic. For example, execution of iOS GUI test suites using Apple's UI Automation framework can take an hour or more if the app's interface is complicated. The longer it takes to run a test, the less frequently the test can be run, which in turn re

Minimalism in architecture: Abstract conceptualization of architecture

Directory of Open Access Journals (Sweden)

Vasilski Dragana

2015-01-01

Full Text Available Minimalism in architecture contains the idea of the minimum as a leading creative tend to be considered and interpreted in working through phenomena of empathy and abstraction. In the Western culture, the root of this idea is found in empathy of Wilhelm Worringer and abstraction of Kasimir Malevich. In his dissertation, 'Abstraction and Empathy' Worringer presented his thesis on the psychology of style through which he explained the two opposing basic forms: abstraction and empathy. His conclusion on empathy as a psychological basis of observation expression is significant due to the verbal congruence with contemporary minimalist expression. His intuition was enhenced furthermore by figure of Malevich. Abstraction, as an expression of inner unfettered inspiration, has played a crucial role in the development of modern art and architecture of the twentieth century. Abstraction, which is one of the basic methods of learning in psychology (separating relevant from irrelevant features, Carl Jung is used to discover ideas. Minimalism in architecture emphasizes the level of abstraction to which the individual functions are reduced. Different types of abstraction are present: in the form as well as function of the basic elements: walls and windows. The case study is an example of Sou Fujimoto who is unequivocal in its commitment to the autonomy of abstract conceptualization of architecture.

Modeling the Impact of Space Suit Components and Anthropometry on the Center of Mass of a Seated Crewmember

Science.gov (United States)

Rajulu, Sudhakar; Blackledge, Christopher; Ferrer, Mike; Margerum, Sarah

2009-01-01

The designers of the Orion Crew Exploration Vehicle (CEV) utilize an intensive simulation program in order to predict the launch and landing characteristics of the Crew Impact Attenuation System (CIAS). The CIAS is the energy absorbing strut concept that dampens loads to levels sustainable by the crew during landing and consists of the crew module seat pallet that accommodates four to six seated astronauts. An important parameter required for proper dynamic modeling of the CIAS is knowledge of the suited center of mass (COM) variations within the crew population. Significant center of mass variations across suited crew configurations would amplify the inertial effects of the pallet and potentially create unacceptable crew loading during launch and landing. Established suited, whole-body, and posture-based mass properties were not available due to the uncertainty of the final CEV seat posture and suit hardware configurations. While unsuited segmental center of mass values can be obtained via regression equations from previous studies, building them into a model that was posture dependent with custom anthropometry and integrated suit components proved cumbersome and time consuming. Therefore, the objective of this study was to quantify the effects of posture, suit components, and the expected range of anthropometry on the center of mass of a seated individual. Several elements are required for the COM calculation of a suited human in a seated position: anthropometry; body segment mass; suit component mass; suit component location relative to the body; and joint angles defining the seated posture. Anthropometry and body segment masses used in this study were taken from a selection of three-dimensional human body models, called boundary manikins, which were developed in a previous project. These boundary manikins represent the critical anthropometric dimension extremes for the anticipated astronaut population. Six male manikins and 6 female manikins, representing a

Nondestructive testing of pavements and pavement bases. (a bibliography with abstracts). Report for 1964-Jan 78

International Nuclear Information System (INIS)

Habercom, G.E. Jr.

1978-01-01

Nondestructive methods for quality assurance of pavements and pavement bases are investigated in these Government-sponsored research reports. Vibration, nuclear activation, radiometry, and acoustic detection are among the various techniques employed. The updated bibliography contains 114 abstracts, 17 of which are new entries to the previous edition

Organic matter linked radionuclide transport in Boom clay - Phenomenological understanding and abstraction to PA

International Nuclear Information System (INIS)

Maes, N.; Bruggeman, C.; Liu, D.J.; Salah, S.; Van Laer, L.; Wang, L.; Weetjens, E.; Govaerts, J.; Marivoet, J.; Brassinnes, S.

2012-01-01

conducted transport studies, performed both under controlled conditions in the lab and in in-situ environment. Transport experiments were conducted to study on one hand the behaviour of DOM itself using natural DOM as well as 14 C- labelled DOM fractions of different sizes separated from Boom Clay pore water. Transport of DOM is investigated at large time- and spatial scale in an in-situ experiment in the HADES URL. These experiments enable us to obtain general migration parameters for DOM as well as some information on filtration processes. The behaviour of RN, from di- to pentavalent, with the affinity to from DOM complexes is investigated in long-term running column migration experiments either as single tracer or complexed with 14 C- labelled DOM, in so-called double-tracer experiments. The use of two radionuclide labels allows the migration behaviour of both the DOM and the RN to be investigated. From these experiments we were able to obtain information on the kinetic dissociation behaviour that influences the transport of the RN. Based on these and other detailed studies, a consistent phenomenological model was put forward and tested which describes the transport behaviour of the RN-DOM linked species. The model considers the radionuclide to be transported as an organic matter complex/colloid that slowly dissociates, and both the RN-DOM and the RN sorb to the solid phase. It was observed that the transport of a suite of RN with different chemical behaviour, but which all show strong affinity to DOM, (tri-, tetra-, pentavalent La/Ac as well as some fission products) can be described by this model and even with parameter ranges that are quite narrow. This model shows several advantages as a first step towards PA abstraction use i) it is process based, ii) it is easy to implement without oversimplification (limited number of parameters which are determined or verified independently), iii) seems applicable for all RN that associate with DOM with a rather narrow range of

Abstracts and papers of the 1996 International RERTR Meeting

International Nuclear Information System (INIS)

1996-10-01

The 1996 International Meeting on Reduced Enrichment for Research and Test Reactors (RERTR) was sponsored by the Korea Atomic Energy Research Institute and the International Atomic Energy Agency and was held in Seoul, Korea, on 6-10 October 1996. The abstracts and available papers that were presented at this meeting are provided. The most important subject dealt with was progress of the Reduced Enrichment Research and Test Reactor (RERTR) Program. The major events, findings, and activities of 1996 are reviewed with the results which the RERTR Program has achieved by the end of 1995 in collaboration of the ANL and its many international partners

Abstracts and papers of the 1996 International RERTR Meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-10-01

The 1996 International Meeting on Reduced Enrichment for Research and Test Reactors (RERTR) was sponsored by the Korea Atomic Energy Research Institute and the International Atomic Energy Agency and was held in Seoul, Korea, on 6-10 October 1996. The abstracts and available papers that were presented at this meeting are provided. The most important subject dealt with was progress of the Reduced Enrichment Research and Test Reactor (RERTR) Program. The major events, findings, and activities of 1996 are reviewed with the results which the RERTR Program has achieved by the end of 1995 in collaboration of the ANL and its many international partners.

28 CFR 36.503 - Suit by the Attorney General.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Suit by the Attorney General. 36.503... discretion, the Attorney General may commence a civil action in any appropriate United States district court if the Attorney General has reasonable cause to believe that— (a) Any person or group of persons is...

Nielsen: Aladdin-Suite, FS89. Maskarade-Overture / Robert Layton

Index Scriptorium Estoniae

Layton, Robert

1996-01-01

Uuest heliplaadist "Nielsen: Aladdin-Suite, FS89. Maskarade-Overture, Prelude, Act 2. The Cockerels' Dance. Rhapsody Overture: An imaginary journey to the Faroe Islands, FS123. Helios Overture, FS32. Saga-Drom, FS46. Pan and Syrinx, FS87. Gothenburg Symphony Orchestra, Neeme Järvi" DG 447 757-2GH (72 minutes: DDD)

Tailoring Vantage 5 (fuel) to suit each operator's need

Energy Technology Data Exchange (ETDEWEB)

Chapin, D L; Secker, J R [Westinghouse Electric Corp., Philadelphia, PA (USA)

1990-03-01

By the end of 1989, Westinghouse Vantage 5 fuel had been reloaded into 36 nuclear power plants. The fuel offers a number of features operators can choose from to suit their own particular needs. Experience so far has shown the fuel to have performed well, with coolant activity levels remaining low. (author).

Malpractice suits in chest radiology: an evaluation of the histories of 8265 radiologists.

Science.gov (United States)

Baker, Stephen R; Patel, Ronak H; Yang, Lily; Lelkes, Valdis M; Castro, Alejandro

2013-11-01

The aim of this study was to present rates of claims, causes of error, percentage of cases resulting in a judgment, and average payments made by radiologists in chest-related malpractice cases in a survey of 8265 radiologists. The malpractice histories of 8265 radiologists were evaluated from the credentialing files of One-Call Medical Inc., a preferred provider organization for computed tomography/magnetic resonance imaging in workers' compensation cases. Of the 8265 radiologists, 2680 (32.4%) had at least 1 malpractice suit. Of those who were sued, the rate of claims was 55.1 per 1000 person years. The rate of thorax-related suits was 6.6 claims per 1000 radiology practice years (95% confidence interval, 6.0-7.2). There were 496 suits encompassing 48 different causes. Errors in diagnosis comprised 78.0% of the causes. Failure to diagnose lung cancer was by far the most frequent diagnostic error, representing 211 cases or 42.5%. Of the 496 cases, an outcome was known in 417. Sixty-one percent of these were settled in favor of the plaintiff, with a mean payment of $277,230 (95% confidence interval, 226,967-338,614). Errors in diagnosis, and among them failure to diagnose lung cancer, were by far the most common reasons for initiating a malpractice suit against radiologists related to the thorax and its contents.

The Complexity of Abstract Machines

Directory of Open Access Journals (Sweden)

Beniamino Accattoli

2017-01-01

Full Text Available The lambda-calculus is a peculiar computational model whose definition does not come with a notion of machine. Unsurprisingly, implementations of the lambda-calculus have been studied for decades. Abstract machines are implementations schema for fixed evaluation strategies that are a compromise between theory and practice: they are concrete enough to provide a notion of machine and abstract enough to avoid the many intricacies of actual implementations. There is an extensive literature about abstract machines for the lambda-calculus, and yet—quite mysteriously—the efficiency of these machines with respect to the strategy that they implement has almost never been studied. This paper provides an unusual introduction to abstract machines, based on the complexity of their overhead with respect to the length of the implemented strategies. It is conceived to be a tutorial, focusing on the case study of implementing the weak head (call-by-name strategy, and yet it is an original re-elaboration of known results. Moreover, some of the observation contained here never appeared in print before.

Abstraction of man-made shapes

KAUST Repository

Mehra, Ravish; Zhou, Qingnan; Long, Jeremy; Sheffer, Alla; Gooch, Amy Ashurst; Mitra, Niloy J.

2009-01-01

Man-made objects are ubiquitous in the real world and in virtual environments. While such objects can be very detailed, capturing every small feature, they are often identified and characterized by a small set of defining curves. Compact, abstracted shape descriptions based on such curves are often visually more appealing than the original models, which can appear to be visually cluttered. We introduce a novel algorithm for abstracting three-dimensional geometric models using characteristic curves or contours as building blocks for the abstraction. Our method robustly handles models with poor connectivity, including the extreme cases of polygon soups, common in models of man-made objects taken from online repositories. In our algorithm, we use a two-step procedure that first approximates the input model using a manifold, closed envelope surface and then extracts from it a hierarchical abstraction curve network along with suitable normal information. The constructed curve networks form a compact, yet powerful, representation for the input shapes, retaining their key shape characteristics while discarding minor details and irregularities. © 2009 ACM.

Scientific meeting abstracts

International Nuclear Information System (INIS)

1999-01-01

The document is a collection of the scientific meeting abstracts in the fields of nuclear physics, medical sciences, chemistry, agriculture, environment, engineering, different aspects of energy and presents research done in 1999 in these fields

Abstract Objects of Verbs

DEFF Research Database (Denmark)

2014-01-01

Verbs do often take arguments of quite different types. In an orthodox type-theoretic framework this results in an extreme polysemy of many verbs. In this article, it is shown that this unwanted consequence can be avoided when a theory of "abstract objects" is adopted according to which...... these objects represent non-objectual entities in contexts from which they are excluded by type restrictions. Thus these objects are "abstract'' in a functional rather than in an ontological sense: they function as representatives of other entities but they are otherwise quite normal objects. Three examples...

Knowledge Architect : A Tool Suite for Managing Software Architecture Knowledge

NARCIS (Netherlands)

Liang, Peng; Jansen, Anton; Avgeriou, Paris

2009-01-01

Management of software architecture knowledge (AK) is vital for improving an organization’s architectural capabilities. To support the architecting process within our industrial partner: Astron, the Dutch radio astronomy institute, we implemented the Knowledge Architect (KA): a tool suite for

UKRmol: a low-energy electron- and positron-molecule scattering suite

Science.gov (United States)

Carr, J. M.; Galiatsatos, P. G.; Gorfinkiel, J. D.; Harvey, A. G.; Lysaght, M. A.; Madden, D.; Mašín, Z.; Plummer, M.; Tennyson, J.; Varambhia, H. N.

2012-03-01

We describe the UK computational implementation of the R-matrix method for the treatment of electron and positron scattering from molecules. Recent developments in the UKRmol suite are detailed together with the collision processes it is enabling us to treat.

Comparison of three distinct clean air suits to decrease the bacterial load in the operating room: an observational study.

Science.gov (United States)

Kasina, Piotr; Tammelin, Ann; Blomfeldt, Anne-Marie; Ljungqvist, Bengt; Reinmüller, Berit; Ottosson, Carin

2016-01-01

Lowering air-borne bacteria counts in the operating room is essential in prevention of surgical site infections in orthopaedic joint replacement surgery. This is mainly achieved by decreasing bacteria counts through dilution, with appropriate ventilation and by limiting the bacteria carrying skin particles, predominantly shed by the personnel. The aim of this study was to investigate if a single use polypropylene clothing system or a reusable polyester clothing system could offer similar air quality in the operating room as a mobile laminar airflow device-assisted reusable cotton/polyester clothing system. Prospective observational study design, comparing the performance of three Clean Air Suits by measuring Colony Forming Units (CFU)/m(3) of air during elective hip and knee arthroplasties, performed at a large university-affiliated hospital. The amount of CFU/m(3) of air was measured during 37 operations of which 13 were performed with staff dressed in scrub suits made of a reusable mixed material (69 % cotton, 30 % polyester, 1 % carbon fibre) accompanied by two mobile laminar airflow units. During 24 procedures no mobile laminar airflow units were used, 13 with staff using a reusable olefin fabric clothing (woven polypropylene) and 11 with staff dressed in single-use suits (non-woven spunbonded polypropylene). Air from the operating field was sampled through a filter, by a Sartorius MD8, and bacterial colonies were counted after incubation. There were 6-8 measurements from each procedure, in total 244 measurements. Statistical analysis was performed by Mann-Whitney U-test. The single-use polypropylene suit reduced the amount of CFU/m(3) to a significantly lower level than both other clothing systems. Single-use polypropylene clothing systems can replace mobile laminar airflow unit-assisted reusable mixed material-clothing systems. Measurements in standardized laboratory settings can only serve as guidelines as environments in real operation settings present a

A suite of models to support the quantitative assessment of spread in pest risk analysis

NARCIS (Netherlands)

Robinet, C.; Kehlenbeck, H.; Werf, van der W.

2012-01-01

In the frame of the EU project PRATIQUE (KBBE-2007-212459 Enhancements of pest risk analysis techniques) a suite of models was developed to support the quantitative assessment of spread in pest risk analysis. This dataset contains the model codes (R language) for the four models in the suite. Three

Compact, Efficient, and Reliable Ventilation Fan for EVA Suits, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Advanced EVA suits for space exploration will need a portable life support system (PLSS) that is compact, lightweight, highly reliable, and meets stringent...

The behavioural patterns and neural correlates of concrete and abstract verb processing in aphasia: A novel verb semantic battery

Directory of Open Access Journals (Sweden)

Reem S.W. Alyahya

2018-01-01

Full Text Available Typically, processing is more accurate and efficient for concrete than abstract concepts in both healthy adults and individuals with aphasia. While, concreteness effects have been thoroughly documented with respect to noun processing, other words classes have received little attention despite tending to be less concrete than nouns. The aim of the current study was to explore concrete-abstract differences in verbs and identify their neural correlates in post-stroke aphasia. Given the dearth of comprehension tests for verbs, a battery of neuropsychological tests was developed in this study to assess the comprehension of concrete and abstract verbs. Specifically, a sensitive verb synonym judgment test was generated that varied both the items' imageability and frequency, and a picture-to-word matching test with numerous concrete verbs. Normative data were then collected and the tests were administered to a cohort of 48 individuals with chronic post-stroke aphasia to explore the behavioural patterns and neural correlates of verb processing. The results revealed significantly better comprehension of concrete than abstract verbs, aligning with the existing aphasiological literature on noun processing. In addition, the patients performed better during verb comprehension than verb production. Lesion-symptom correlational analyses revealed common areas that support processing of concrete and abstract verbs, including the left anterior temporal lobe, posterior supramarginal gyrus and superior lateral occipital cortex. A direct contrast between them revealed additional regions with graded differences. Specifically, the left frontal regions were associated with processing abstract verbs; whereas, the left posterior temporal and occipital regions were associated with processing concrete verbs. Moreover, overlapping and distinct neural correlates were identified in association with the comprehension and production of concrete verbs. These patient findings