WorldWideScience

Sample records for absorption refrigeration system

  1. Compression-absorption cascade refrigeration system

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Seara, Jose; Sieres, Jaime; Vazquez, Manuel [Area de Maquinas y Motores Termicos, Escuela Tecnica Superior de Ingenieros Industriales, Universidade de Vigo, Campus Lagoas-Marcosende, 9, 36200 Vigo (Spain)

    2006-04-01

    This paper describes the study carried out to analyse a refrigeration system in cascade with a compression system at the low temperature stage and an absorption system at the high temperature stage to generate cooling at low temperatures, as well as the possibility of powering it by means of a cogeneration system. CO{sub 2} and NH{sub 3} have been considered as refrigerants in the compression stage and the pair NH{sub 3}-H{sub 2}O in the absorption stage. The analysis has been realized by means of a mathematical model of the refrigeration system implemented in a computer program and taking into account the characteristic operating conditions of a cogeneration system with gas engines. The paper presents the results obtained regarding the performance of the refrigeration system and the adaptability between the power requirements of the refrigeration system and the power supplied by the cogeneration system taking into account the present Spanish Regulations about the use of cogeneration systems. [Author].

  2. COMPARISON OF ENERGY AND EXERGY EFFICIENCIES OF ABSORPTION REFRIGERATION SYSTEM WITH MECHANICAL COMPRESSION REFRIGERATION SYSTEM

    OpenAIRE

    2005-01-01

    In this study, energy and exergy analysis of absorption refrigeration system using LiBr- water and mechanical compression refrigeration system using R134-a were performed at different evaporation temperatures. The results are presented in tables and figures.

  3. COMPARISON OF ENERGY AND EXERGY EFFICIENCIES OF ABSORPTION REFRIGERATION SYSTEM WITH MECHANICAL COMPRESSION REFRIGERATION SYSTEM

    Directory of Open Access Journals (Sweden)

    Gülay YAKAR

    2005-02-01

    Full Text Available In this study, energy and exergy analysis of absorption refrigeration system using LiBr- water and mechanical compression refrigeration system using R134-a were performed at different evaporation temperatures. The results are presented in tables and figures.

  4. Computational Model of a Biomass Driven Absorption Refrigeration System

    Directory of Open Access Journals (Sweden)

    Munyeowaji Mbikan

    2017-02-01

    Full Text Available The impact of vapour compression refrigeration is the main push for scientists to find an alternative sustainable technology. Vapour absorption is an ideal technology which makes use of waste heat or renewable heat, such as biomass, to drive absorption chillers from medium to large applications. In this paper, the aim was to investigate the feasibility of a biomass driven aqua-ammonia absorption system. An estimation of the solid biomass fuel quantity required to provide heat for the operation of a vapour absorption refrigeration cycle (VARC is presented; the quantity of biomass required depends on the fuel density and the efficiency of the combustion and heat transfer systems. A single-stage aqua-ammonia refrigeration system analysis routine was developed to evaluate the system performance and ascertain the rate of energy transfer required to operate the system, and hence, the biomass quantity needed. In conclusion, this study demonstrated the results of the performance of a computational model of an aqua-ammonia system under a range of parameters. The model showed good agreement with published experimental data.

  5. Absorber-evaporator unit for an absorption-refrigeration system

    Energy Technology Data Exchange (ETDEWEB)

    Hallatt, R.J.; Rorschach, R.L.

    1965-01-26

    This low temperature absorption-refrigeration system uses an absorber-evaporator. A conduit is connected between the upper portion of the absorber and the lower portion of the evaporator to conduct inert gas from the absorber to the evaporator. A second conduit connects the upper portion of the evaporator to the lower portion of the absorber and a blower in this conduit circulates the inert gas through the closed system. By placing the blower between the evaporator ad the absorber, the pressure in the evaporator is maintained at a minimum so that the working temperature is as low as possible. The medium to be cooled by the refrigerant is circulated through a heat exchanger located within the evaporator, whereby the latent heat of vaporization of the liquid refrigerant is employed to cool the outside medium. (2 claims)

  6. Performance of Gas Purge System of Absorption Refrigerating Machine

    Science.gov (United States)

    Kunugi, Yoshifumi; Ouchi, Tomihisa; Usui, Sanpei; Sugimoto, Shigeo

    Experimental studies on performance of two gas purge systems for the lithium bromide-water absorption refrigerating machine are presented in this paper. The first purge system is that the solution flow entrains the incondensable gas from the absorber in the first purge chamber, then the incondesable gas from the condenser in the second purge chamber. The second purge system is that the solution flow entrains the incondensable gas, separates it in the separator, and then returns to the refrigerating machine through the inverted U tube. As a result, purged gas rate of both gas purge systems conforms to the theoretical equation ; S=V0(P-P0), where S is purged gas rate, V0 is exhaust gas rate, P is pressure of purge chamber, and P0 is saturated vapor pressure of solution.

  7. Ammonia-water absorption refrigeration systems with flooded evaporators

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Seara, Jose; Sieres, Jaime [Area de Maquinas y Motores Termicos, Escuela Tecnica Superior de Ingenieros Industriales, Universidad de Vigo, Campus Lagoas-Marcosende No. 9, 36310 Vigo (Spain)

    2006-12-15

    The harmful effects of water accumulation in the evaporator in ammonia-water absorption refrigeration systems (AARS) with flooded evaporators are a crucial issue. In this paper, the effects of the ammonia purification and the liquid entrainment and blow-down from the evaporator in AARS are analyzed. A mathematical model based on a single stage system with complete condensation has been developed. The ammonia purification is evaluated by means of the Murphree efficiencies of the stripping and rectifying sections of the distillation column. The entrainment and blow-down are taking into account considering the corresponding flow rates as a fraction of the dry vapour at the evaporator outlet. The influence of the distillation column components efficiency on the attainable distillate concentration and the effects of the distillate concentration and the liquid entrainment and blow-down on the system operating conditions and performance are analyzed and quantified. If no liquid entrainment or blow-down is considered, very high efficiencies in the distillation column are required. Small values of liquid entrainment or blow-down fractions increase significantly the operating range of the absorption system. If high values of the blow-down fraction are required, then a heat exchanger should be added to the system in order to recover the refrigeration capacity of the blow-down by additional subcooling of the liquid from the condenser. For a fixed value of the distillation column efficiency, an optimum value of the liquid blow-down fraction exists. Moreover, an optimum combination of generation temperature, reflux ratio and blow-down fraction can be found, which should be considered in designing and controlling an AARS. (author)

  8. Using engine exhaust gas as energy source for an absorption refrigeration system

    Energy Technology Data Exchange (ETDEWEB)

    Manzela, Andre Aleixo [PETROBRAS, Exploration and Production, Av. Rui Barbosa, 1940 - 3 andar, 27915-012 - Macae - RJ (Brazil); Hanriot, Sergio Morais; Cabezas-Gomez, Luben; Sodre, Jose Ricardo [Pontifical Catholic University of Minas Gerais, Department of Mechanical Engineering, Av. Dom Jose Gaspar, 500, 30535-610 - Belo Horizonte - MG (Brazil)

    2010-04-15

    This work presents an experimental study of an ammonia-water absorption refrigeration system using the exhaust of an internal combustion engine as energy source. The exhaust gas energy availability and the impact of the absorption refrigeration system on engine performance, exhaust emissions, and power economy are evaluated. A production automotive engine was tested in a bench test dynamometer, with the absorption refrigeration system adapted to the exhaust pipe. The engine was tested for 25%, 50%, 75% and wide-open throttle valve. The refrigerator reached a steady state temperature between 4 and 13 C about 3 h after system start up, depending on engine throttle valve opening. The calculated exhaust gas energy availability suggests the cooling capacity can be highly improved for a dedicated system. Exhaust hydrocarbon emissions were higher when the refrigeration system was installed in the engine exhaust, but carbon monoxide emissions were reduced, while carbon dioxide concentration remained practically unaltered. (author)

  9. Solar-powered absorption refrigeration system; Solarbetriebene Absorptions-Kaeltemaschine MGB - Zuerich

    Energy Technology Data Exchange (ETDEWEB)

    Corbaz, C.; Utz, C.

    2005-07-01

    This illustrated final report for the Swiss Federal Office of Energy (SFOE) reviews the project implemented at the head offices of the Migros co-operative society MGB in Zurich, Switzerland, involving cold generation using evacuated solar collectors and an absorption refrigeration system. The experience gained with this first solar powered cooling system using evacuated tube collectors located on the flat roof of the building is discussed. Considerable possibilities for the optimisation of the system are discussed, including the use of excess heat stored overnight in the warm-up phase of operation on the next day. The advantages of the correct placing of equipment rooms near to collectors and cooling-towers are discussed. The operation and characteristics of the installation in winter and summer operation are briefly described and figures on its performance and the costs involved are quoted.

  10. Solar Absorption Refrigeration System for Air-Conditioning of a Classroom Building in Northern India

    Science.gov (United States)

    Agrawal, Tanmay; Varun; Kumar, Anoop

    2015-10-01

    Air-conditioning is a basic tool to provide human thermal comfort in a building space. The primary aim of the present work is to design an air-conditioning system based on vapour absorption cycle that utilizes a renewable energy source for its operation. The building under consideration is a classroom of dimensions 18.5 m × 13 m × 4.5 m located in Hamirpur district of Himachal Pradesh in India. For this purpose, cooling load of the building was calculated first by using cooling load temperature difference method to estimate cooling capacity of the air-conditioning system. Coefficient of performance of the refrigeration system was computed for various values of strong and weak solution concentration. In this work, a solar collector is also designed to provide required amount of heat energy by the absorption system. This heat energy is taken from solar energy which makes this system eco-friendly and sustainable. A computer program was written in MATLAB to calculate the design parameters. Results were obtained for various values of solution concentrations throughout the year. Cost analysis has also been carried out to compare absorption refrigeration system with conventional vapour compression cycle based air-conditioners.

  11. A Cooling System for an Automobile Based on Vapour Absorption Refrigeration Cycle Using Waste Heat of an Engine.

    Directory of Open Access Journals (Sweden)

    Satish K. Maurya

    2014-03-01

    Full Text Available Now a days the air conditioning system of cars is mainly uses “Vapour Compression Refrigerant System” (VCRS which absorbs and removes heat from the interior of the car that is the space to be cooled and rejects the heat to atmosphere. In vapour compression refrigerant system, the system utilizes power from engine shaft as the input power to drive the compressor of the refrigeration system, hence the engine has to produce extra work to run the compressor of the refrigerating system utilizing extra amount of fuel. This loss of power of the vehicle for refrigeration can be neglected by utilizing another refrigeration system i.e. a “Vapour Absorption Refrigerant System”. As well known thing about VAS that these machines required low grade energy for operation. Hence in such types of system, a physicochemical process replaces the mechanical process of the Vapour Compression Refrigerant System by using energy in the form of heat rather than mechanical work. This heat obtained from the exhaust of high power internal combustion engines.

  12. The Research on Programmable Control System of Lithium-Bromide Absorption Refrigerating Air Conditioner Based on the Network

    Directory of Open Access Journals (Sweden)

    Sun Lunan

    2016-01-01

    Full Text Available This article regard the solar lithium-bromide absorption refrigerating air conditioning system as the research object, and it was conducting adequate research of the working principle of lithium bromide absorption refrigerating machine, also it was analyzing the requirements of control system about solar energy air conditioning. Then the solar energy air conditioning control system was designed based on PLC, this system was given priority to field bus control system, and the remote monitoring is complementary, which was combining the network remote monitoring technology. So that it realized the automatic control and intelligent control of new lithium bromide absorption refrigerating air conditioning system with solar energy, also, it ensured the control system can automatically detect and adjust when the external conditions was random changing, to make air conditioning work effectively and steadily, ultimately ,it has great research significance to research the air conditioning control system with solar energy.

  13. Simulator for design absorption refrigeration system; Simulador para projeto de ciclos de refrigeracao por absorcao

    Energy Technology Data Exchange (ETDEWEB)

    Morejon, C.F.M.; Brum, N. de C. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia Mecanica]. E-mails: Camilo_freddy@hotmail.com; Nisio@serv.com.ufrj.br

    2000-07-01

    This work presents a development of a thermal fluid dynamics model and a solution of a steady state absorption refrigeration cycle, with ammonia water as the working fluid. Analytical thermodynamics models expressing the enthalpy in function of pressure, temperature and composition (h=f(P,T,x)), are used with the aim to design all of the cycle devices, moved by any type of energy such as solar, natural gas, steam or electrical energy (Morejon and Hackenberg, 1978). The development of the analysis is carried out by the application of thermal fluid dynamics concepts together with a detailed study of the heat and mass transfer in the different cycle stages. The thermodynamic cycle model, obtained from equation of state for ammonia - water mixtures (Ziegker and Trepp, 1984), is represented by the relation h - x (enthalpy-composition) for different pressures and temperatures. The obtained models are used to implement computational codes in MAPLE-V facilitating the design and simulation of refrigeration system. This study can be applied in the systems of air conditioning and refrigeration chambers design. (author)

  14. Mathematical Model of a Lithium-Bromide/Water Absorption Refrigeration System Equipped with an Adiabatic Absorber

    Directory of Open Access Journals (Sweden)

    Salem M. Osta-Omar

    2016-11-01

    Full Text Available The objective of this paper is to develop a mathematical model for thermodynamic analysis of an absorption refrigeration system equipped with an adiabatic absorber using a lithium-bromide/water (LiBr/water pair as the working fluid. The working temperature of the generator, adiabatic absorber, condenser, evaporator, the cooling capacity of the system, and the ratio of the solution mass flow rate at the circulation pump to that at the solution pump are used as input data. The model evaluates the thermodynamic properties of all state points, the heat transfer in each component, the various mass flow rates, and the coefficient of performance (COP of the cycle. The results are used to investigate the effect of key parameters on the overall performance of the system. For instance, increasing the generator temperatures and decreasing the adiabatic absorber temperatures can increase the COP of the cycle. The results of this mathematical model can be used for designing and sizing new LiBr/water absorption refrigeration systems equipped with an adiabatic absorber or for optimizing existing aforementioned systems.

  15. Optimization of operation of energy supply systems with co-generation and absorption refrigeration

    Directory of Open Access Journals (Sweden)

    Stojiljković Mirko M.

    2012-01-01

    Full Text Available Co-generation systems, together with absorption refrigeration and thermal storage, can result in substantial benefits from the economic, energy and environmental point of view. Optimization of operation of such systems is important as a component of the entire optimization process in pre-construction phases, but also for short-term energy production planning and system control. This paper proposes an approach for operational optimization of energy supply systems with small or medium scale co-generation, additional boilers and heat pumps, absorption and compression refrigeration, thermal energy storage and interconnection to the electric utility grid. In this case, the objective is to minimize annual costs related to the plant operation. The optimization problem is defined as mixed integer nonlinear and solved combining modern stochastic techniques: genetic algorithms and simulated annealing with linear programming using the object oriented “ESO-MS” software solution for simulation and optimization of energy supply systems, developed as a part of this research. This approach is applied to optimize a hypothetical plant that might be used to supply a real residential settlement in Niš, Serbia. Results are compared to the ones obtained after transforming the problem to mixed 0-1 linear and applying the branch and bound method.

  16. Thermodynamic Analysis of an Absorption/Compression Refrigeration System Using Geothermal Energy

    Directory of Open Access Journals (Sweden)

    L. Kairouani

    2005-01-01

    Full Text Available This article presents the potential use and exploration of geothermal energy for cooling applications using a combined absorption/compression system. The considered system uses R134a for the compression part and the cool water-ammonia for the absorption part of the installation. The geothermal temperature source is in the range 343-349K, the condensation temperature is 308 K, and in order to produce ice, the R134a evaporation temperature is 263 K. The COP is about 5.4. Therefore, based on the typical geothermal energy sources in Tunisia which present a refrigeration potential power of 9.1 MW, the quantity of ice that could be produced is about 82 tons per hour. The greenhouse gas emissions should thus be reduced by about 5884 tons of CO2 per year, which represents (59%.

  17. Quantum-enhanced absorption refrigerators

    CERN Document Server

    Correa, Luis A; Alonso, Daniel; Adesso, Gerardo

    2014-01-01

    Thermodynamics is a branch of science blessed by an unparalleled combination of generality of scope and formal simplicity. Based on few natural assumptions together with the four laws, it sets the boundaries between possible and impossible in macroscopic aggregates of matter. This triggered groundbreaking achievements in physics, chemistry and engineering over the last two centuries. Close analogues of those fundamental laws are now being established at the level of individual quantum systems, thus placing limits on the operation of quantum-mechanical devices. Here we study quantum absorption refrigerators, which are driven by heat rather than external work. We establish thermodynamic performance bounds for these machines and investigate their quantum origin. We also show how those bounds may be pushed beyond what is classically achievable, by suitably tailoring the environmental fluctuations via quantum reservoir engineering techniques. Such superefficient quantum-enhanced cooling realises a promising step t...

  18. Thermodynamic Investigation of Two-Stage Absorption Refrigeration System Connected by a Compressor

    Directory of Open Access Journals (Sweden)

    L. Kairouani

    2005-01-01

    Full Text Available The present work is to analyze a two-stage cycle based on the ammonia-water absorption system, with intermediate compression. The two generators of the system are heated by geothermal energy at low temperature. The study shows that this system makes it possible at lower generator temperature, under the limits permitted by the systems suggested up to now. For Tg = 335 K, Tc = Ta = 308 K and Te = 263 K, based on the electric consumption, the system efficiency is 8.2. The comparative study of the hybrid system and vapor compression systems shows the superiority of the proposed system. Supplied by the geothermal sources of the Tunisian south, the system makes it possible to obtain for a pilot geothermal station, a production of 75 tons of ice per day. The greenhouse gas emissions should thus be reduced by about 2.38 tons of CO2 per day. Therefore, based on the typical geothermal energy sources in Tunisia which present a global refrigeration potential of 4.4 MW, the daily quantity of ice that could be produced is about 865 tons. The greenhouse gas emissions should thus be reduced by about 10,000 tons of CO2 per year.

  19. Mass transfer characteristics of a structured packing for ammonia rectification in ammonia-water absorption refrigeration systems

    Energy Technology Data Exchange (ETDEWEB)

    Sieres, Jaime; Fernandez-Seara, Jose [Area de Maquinas y Motores Termicos, E.T.S. de Ingenieros Industriales, University of Vigo, Campus Lagoas-Marcosende N9, 36310 Vigo (Spain)

    2007-01-15

    In ammonia-water absorption refrigeration systems a purification process of the vapours produced in the generator is required. One type of equipment to carry out the purification process is a packed column. However, detailed experimental studies at the normal operating conditions found in ammonia-water absorption refrigeration systems have not been found. An experimental facility has been designed and built to study the ammonia-water rectification in packed columns. Experimental tests have been performed at the normal operating conditions found in the high-pressure stage of a small power ammonia-water absorption refrigeration system. In this paper, the experimental set-up is described and experimental results of the height equivalent to a theoretical plate (HETP) and the volumetric mass transfer coefficient of a rectifying section with the Sulzer BX packing are presented. The HETP values and the experimental mass transfer coefficients are compared with different data and correlations proposed in the literature; it has been found that the differences are appreciable. (author)

  20. Performance bound for quantum absorption refrigerators

    Science.gov (United States)

    Correa, Luis A.; Palao, José P.; Adesso, Gerardo; Alonso, Daniel

    2013-04-01

    An implementation of quantum absorption chillers with three qubits has been recently proposed that is ideally able to reach the Carnot performance regime. Here we study the working efficiency of such self-contained refrigerators, adopting a consistent treatment of dissipation effects. We demonstrate that the coefficient of performance at maximum cooling power is upper bounded by 3/4 of the Carnot performance. The result is independent of the details of the system and the equilibrium temperatures of the external baths. We provide design prescriptions that saturate the bound in the limit of a large difference between the operating temperatures. Our study suggests that delocalized dissipation, which must be taken into account for a proper modeling of the machine-baths interaction, is a fundamental source of irreversibility which prevents the refrigerator from approaching the Carnot performance arbitrarily closely in practice. The potential role of quantum correlations in the operation of these machines is also investigated.

  1. Thermoeconomic Analysis of a Single and Double-Effect LiBr/H2O Absorption Refrigeration System

    Directory of Open Access Journals (Sweden)

    Silvia Azucena Nebra

    2009-06-01

    Full Text Available

    The aim of this work is to carry out a thermoeconomic analysis of a single and double-effect LiBr/H2O absorption refrigeration system. The methodology of functional analysis with negentropy is used. The exergetic cost of the main product, the cooling cost, was calculated as a function of the exergy of the heat source. Two cases were analyzed for each system: the first considers a direct-fired system while the second considers a hot-water driven system for the single-effect system and a steam-driven system for the double effect system as part of a cogeneration system. As expected, the resultant exergetic cost of the main product was higher for the direct-fired system.

    • This paper is an updated version of a paper published in the ECOS'08 proceedings. 

  2. Simultaneous heat and mass transfer of a packed distillation column for ammonia-water absorption refrigeration systems

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Seara, Jose; Sieres, Jaime; Vazquez, Manuel [Area de Maquinas y Motores Termicos, Escuela Tecnica Superior de Ingenieros Industriales de Vigo, Universidad de Vigo, Campus Lagoas-Marcosende, N circle 9, 36200, Vigo (Spain)

    2002-10-01

    This paper presents a study on the NH{sub 3}-H{sub 2}O distillation process using a packed column with liquid reflux from the condenser in an absorption refrigeration system. A differential mathematical model has been developed on the basis of mass and energy balances and the heat and mass transfer equations. A net molar flux between the liquid and vapour phases has been considered in the mass transfer equation, which obviates the need to assume equimolar counter-diffusion. The model equations have been solved using the finite-difference method. Results obtained for a specific application are shown, including parameter distributions along the column length. The influence of rectifying and stripping lengths, mass and heat transfer coefficients and volumetric heat rejection from the column, on the distillate ammonia concentration has been analysed. (authors)

  3. The Absorption Refrigerator as a Thermal Transformer

    Science.gov (United States)

    Herrmann, F.

    2009-01-01

    The absorption refrigerator can be considered a thermal transformer, that is, a device that is analogous to the electric transformer. The analogy is based on the correspondence between the extensive quantities, entropy and electric charge and the intensive variables, temperature and electric potential. (Contains 1 footnote and 6 figures.)

  4. Use of process steam in vapor absorption refrigeration system for cooling and heating applications: An exergy analysis

    Directory of Open Access Journals (Sweden)

    S. Anand

    2016-12-01

    Full Text Available The exponential increase in cost of conventional fuels shifts the interest toward the use of alternative as well waste energy sources for the operation of refrigeration and air-conditioning units. The present study therefore analyzes the performance of a process steam-operated vapor absorption system for cooling and heating applications using ammonia and water as working fluids based on first and second laws of thermodynamics. A mathematical model has been developed based on exergy analysis to investigate the performance of the system. The different performance parameters such as coefficient of performance (COP and exergetic efficiency of absorption system for cooling and heating applications are also calculated under different operating conditions. The results obtained show that cooling and heating COP along with second law efficiency (exergy efficiency increases with the heat source temperature at constant evaporator, condenser, and absorber temperature. Also, COP as well as exergy efficiency increases with an increase in the evaporator temperature at constant generator, condenser, and absorber temperature. The effect of ambient temperature on the exergetic efficiency for cooling and heating applications is also studied. The results obtained from the simulation studies can be used to optimize different components of the system so that the performance can be improved significantly.

  5. Refrigeration systems and applications

    CERN Document Server

    Dincer, Ibrahim

    2010-01-01

    Refrigeration Systems and Applications, 2nd edition offers a comprehensive treatise that addresses real-life technical and operational problems, enabling the reader to gain an understanding of the fundamental principles and the practical applications of refrigeration technology. New and unique analysis techniques (including exergy as a potential tool), models, correlations, procedures and applications are covered, and recent developments in the field are included - many of which are taken from the author's own research activities in this area. The book also includes so

  6. Experimental Investigation on an Absorption Refrigerator Driven by Solar Cells

    Directory of Open Access Journals (Sweden)

    Zi-Jie Chien

    2013-01-01

    Full Text Available This experiment is to study an absorption refrigerator driven by solar cells. Hand-held or carried in vehicle can be powered by solar energy in places without power. In the evenings or rainy days, it is powered by storage battery, and it can be directly powered by alternating current (AC power supply if available, and the storage battery can be charged full as a backup supply. The proposed system was tested by the alternation of solar irradiance 550 to 700 W/m2 as solar energy and 500ml ambient temperature water as cooling load. After 160 minutes, the proposal refrigerator can maintain the temperature at 5–8°C, and the coefficient of performance (COP of NH3-H2O absorption refrigeration system is about 0.25. Therefore, this system can be expected to be used in remote areas for refrigeration of food and beverages in outdoor activities in remote and desert areas or long-distance road transportation of food or low temperature refrigeration of vaccine to avoid the deterioration of the food or the vaccines.

  7. Application of a solar refrigeration system by absorption for the air conditioning of buildings

    Energy Technology Data Exchange (ETDEWEB)

    Machielsen, Cees H. M [Delft University of Technology, Mekelweg (Netherlands); Hagendijk, Andre E [Consultancy and Research (Netherlands)

    2000-07-01

    This paper describes the Sofri project, a cooperation between Ceeran Ltd and The Delft University of Technology. The main objective of this project is to develop the necessary knowledge and experience to commercialize solar-assisted air conditioning and dehumidification systems in the Dutch Caribbean. The project is motivated by the present needs of the Dutch Caribbean for renewable energy sources and the fact that the Caribbean has a high and uniform insolation throughout the year. Furthermore, hotels and offices in this area use more than 40% of their energy for air-conditioning purposes. Therefore solar-assisted air conditioning systems are a logic approach in reducing the energy demand and to lower the peak electricity reducing the energy demands for the local power station. Ceeran Ltd has the objective to reach full commercialization of the proposed technologies in the Dutch Caribbean. The research is concentrated on liquid absorption machines and solar collection systems such as flat plates with selective surfaces, heat pipe evacuated tubes flat plate collectors, and Compound Parabolic Concentrators. The first demonstration unit is planned to be installed in an office building in Curacao. The installation consists of a 35 kW LiBr/H{sub 2}O absorption machine driven by 100 m{sup 2} flat pate collectors with a gas backup system. The system will provide comfort air-conditioning for this these type of office buildings during daytime. [Spanish] Este documento describe el proyecto SOFRI, una cooperacion entre Ceeran, Ltd, y la Universidad Tecnologica del Delft. El principal objetivo de este proyecto es el de desarrollar el conocimiento necesario y la experiencia para comercializar los sistemas de aire acondicionado y deshumidificacion ayudados por la energia solar en el Caribe Holandes. Este proyecto ha sido motivado por las actuales necesidades del Caribe Holandes de fuentes de energia renovable y por el hecho de que el Caribe tiene una alta y uniforme insolacion

  8. Simulation of an air conditioning absorption refrigeration system in a co-generation process combining a proton exchange membrane fuel cell

    Energy Technology Data Exchange (ETDEWEB)

    Pilatowsky, I.; Gamboa, S.A.; Rivera, W. [Centro de Investigacion en Energia - UNAM, Temixco, Morelos (Mexico); Romero, R.J. [Centro de Investigacion en Ingenieria y Ciencias Aplicadas - UAEM, Cuernavaca, Morelos (Mexico); Isaza, C.A. [Universidad Pontificia Bolivariana, Medellin (Colombia). Instituto de Energia y Termodinamica; Sebastian, P.J. [Centro de Investigacion en Energia - UNAM, Temixco, Morelos (Mexico); Cuerpo Academico de Energia y Sustentabilidad-UP Chiapas, Tuxtla Gutierrez, Chiapas (Mexico); Moreira, J. [Cuerpo Academico de Energia y Sustentabilidad-UP Chiapas, Tuxtla Gutierrez, Chiapas (Mexico)

    2007-10-15

    In this work, a computer simulation program was developed to determine the optimum operating conditions of an air conditioning system during the co-generation process. A 1 kW PEMFC was considered in this study with a chemical/electrical theoretical efficiency of 40% and a thermal efficiency of 30% applying an electrical load of 100%. A refrigeration-absorption cycle (RAC) operating with monomethylamine-water solutions (MMA-WS), with low vapor generation temperatures (up to 80 C) is proposed in this work. The computer simulation was based on the refrigeration production capacity at the maximum power capacity of the PEMFC. Heat losses between the fuel cell and the absorption air conditioning system at standard operating conditions were considered to be negligible. The results showed the feasibility of using PEMFC for cooling, increasing the total efficiency of the fuel cell system. (author)

  9. Evaluation of combined effect of organic and inorganic inhibitors on the metals used in absorption refrigeration system

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, M.H.; Back, K.K. [Hyundai Heavy Industries Co. Ltd., Ulsan (Korea, Republic of). Hyundai Industrial Research Inst.

    1999-11-01

    To develop environment-friendly inhibitors for the metals used in the absorption refrigeration system, inhibition efficiencies of six different combinations of inhibitors were evaluated in 64wt%LiBr solution at 160 C. Double and triple combinations of inhibitors, such as lithium molybdate (Li{sub 2}MoO{sub 4}, inorganic), lithium hydroxide (LiOH, inorganic), and benzotriazole (BTA, organic) were evaluated for their efficiencies in corrosion inhibition of copper and mild steel. Results from weight-loss tests showed that the double inhibitor combinations were less effective for topper than for mild steel, whereas the triple inhibitor combination of 0.2wt%LiOH + 0.02wt%Li{sub 2}MoO{sub 4} + 0.05wt%BTA was most effective and it showed much better performance than any other double inhibitor combinations including the commercial products. This formula, of which inhibition efficiency was predicted to be about 83% for copper and 96% for mild steel, can replace the commercial grade inhibitors containing lithium chromate (Li{sub 2}CrO{sub 4})

  10. Experimental investigation of mass transfer performance with some random packings for ammonia rectification in ammonia-water absorption refrigeration systems

    Energy Technology Data Exchange (ETDEWEB)

    Sieres, Jaime; Fernandez-Seara, Jose [Area de Maquinas y Motores Termicos, E.T.S. de Ingenieros Industriales, University of Vigo, Campus Lagoas-Marcosende No 9, 36310 Vigo (Spain)

    2007-07-15

    In ammonia water absorption refrigeration systems (AARS) a high efficiency purification process to remove the water content from the generated vapour is of great importance. One type of equipment to carry out this process is a packed column. Any type of detailed analysis of a packed column requires the calculation of mass transfer coefficients. Therefore, the correlations to obtain these coefficients become an essential tool for an accurate analysis and design of these devices. An experimental facility has been designed and built to analyze the ammonia-water rectification process in packed columns. In this paper a brief description of the experimental facility is given and the variables required to analyze the column performance are explained. An analytical method to determine mass transfer coefficients from the experimental data is developed. Results of mass transfer coefficients for 15 mm glass Raschig rings, (1)/(2){sup ''} ceramic Berl saddles and (1)/(2)'' ceramic Novalox saddles random packings are reported. The experimental results are compared with different mass transfer correlations proposed in the literature. In the paper corrected correlations are proposed for the packings considered. These correlations could be used to analyze and design a packed column for AARS. (author)

  11. An Exergy Analysis of LiBr-Water Absorption Refrigerators

    Science.gov (United States)

    Asano, Hitoshi; Fujii, Terushige; Wang, Xiao; Origane, Takafumi; Katayama, Masatoshi; Inoue, Umeo

    Absorption refrigerators are very efficient as a heat recovery unit in a co-generation system.In order to design an absorption refrigerator for an arbitrary heat source properly, it is important to consider not only quantity but also quality of heat flow. The evaluation of exergy loss in each component is also effective for the improvement of system. This paper deals with the exergy analysis on a LiBr-water absorption refrigerator consisted of a single-and a double-effect cycle driven by the exhaust gas of the micro gas turbine with the output power of about 30 kW. Moreover, exergy loss in absorption process was eva1uated. As a result, it was shown that 80% of the exergy loss in an absorber was caused in absorption process, and the exergy loss decreased with decreasing the change in solution concentration in absorber. In these calculated results,the maximum cooling load of 77.8 kW was obtained from the exhaust gas with the temperature of 2900°C by utilizing both a single-and a double-effect cycles in combination. The energy and exergy efficiency of the system was 88.0% and 25.6%, respectively.

  12. 两种新型太阳能吸收式制冷循环系统%Two Types of New Solar-Absorption Refrigeration Cycle System

    Institute of Scientific and Technical Information of China (English)

    李志生; 曾涛; 郭初

    2014-01-01

    介绍了太阳能制冷的实现途径和太阳能吸收式制冷系统的研究现状,分析了传统型太阳能吸收式制冷系统的缺点与存在的问题,提出了两种新型太阳能吸收式制冷系统:即在传统的系统基础上增加了压缩式热泵系统(新型A);在太阳能集热器中加入相变蓄能材料,且将热泵系统的蒸发器与太阳能集热器合为一体(新型B)。详细介绍了两种新型系统的工作原理,分析了的系统优缺点。新型系统可以较好利用太阳能实现制冷,能解决传统型系统存在的弊端,为太阳能空调系统的优化提供了新的研究方向。%The realization ways of the solar cooling is introduced, as well as the current research status of solar-absorption refrigeration system. The shortcomings and problems in the traditional solar-absorption refrigeration system are analyzed, proposing two types of new solar-absorption refrigeration system, including model A - system adding a compression heat pump system based on the traditional system; model B - system adding the phase-change energy storage material in solar collector, and com-bining the heat pump system’s evaporator and solar collector together. The working principles of new sys-tems are expounded in details, with analysis on strengths and weaknesses of systems. The new systems can better use solar energy to realize refrigeration, and can solve the drawbacks of the traditional system, pro-vides a new research direction for the optimization of solar air conditioning system.

  13. Study and control of the optimal generation temperature in NH{sub 3}-H{sub 2}O absorption refrigeration systems

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Seara, Jose; Vazquez, Manuel [Escuela Tecnica Superior de Ingenieros Industriales, Area de Maquinas y Motores Termicos, Vigo (Spain)

    2001-02-01

    This paper presents the results of a study on the optimal generator temperature (OGT) in single stage NH{sub 3}-H{sub 2}O Absorption Refrigeration Systems (AARS). It is well known that the generation temperature affects the AARS's Coefficient of Performance (COP) and that there is a temperature value, called optimal generation temperature, for which the COP is maximum. Therefore, to develop new control strategies designed to maintain the optimal temperature in the system generator, it is necessary to study the dependency of this temperature on thermal operating conditions and system design parameters. One such type of study has been carried out here by means of a parametric analysis, using a simple model implemented in a computer program. Based on the results obtained a novel control system that works on two separated control-loops has been designed. The proposed control system maintains a constant temperature in the space to refrigerate as well as the optimal temperature in the system generator. (Author)

  14. Extending the market for cogeneration with absorption refrigeration

    Energy Technology Data Exchange (ETDEWEB)

    Langreck, J. [Colibri, Vaals (Netherlands); Pruiksma, E. [Stork Thermeq, Hengelo (Netherlands)

    1999-07-01

    The use of heat generated by cogeneration plants for absorption refrigeration plants (ARPs) is discussed in this article, and the advantages of the combination of cogeneration and ARPs are reported. Details are given of the two different types of ARPs, its operation, the importance of the food industry and industries that need cooling as a market for ARP, and recent cogeneration-ARP systems such as that installed in a margarine production plant in Rotterdam. The use of the fluegases from cogeneration plants and heat flows from chemical plants to drive ARPs are considered. (UK)

  15. Heat recovery system to power an onboard NH{sub 3}-H{sub 2}O absorption refrigeration plant in trawler chiller fishing vessels

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Seara, J.; Vales, A.; Vazquez, M. [Escuela Tecnica Superior de Ingenieros Industriales, Vigo (Spain). Area de Maquinas y Motores Termikcos

    1998-12-01

    This paper is concerned with the design, modelling and parametric analysis of a gas-to-thermal fluid heat recovery system from engine exhausts in a trawler chiller fishing vessel to power an NH{sub 3}-H{sub 2}O absorption refrigeration plant for onboard cooling production. Synthetic oil was used as heat transfer fluid and recirculated. The major components of the system are fluid-to-solution and gas-to-fluid heat exchangers. Both heat exchangers and the complete system have been modelled. Models are implemented in several computer programs. These models have been used to study the influence of geometric design parameters and thermal operating conditions on heat exchangers and system thermal performance. The analysis of the results allowed us to find the optimum thermal operating conditions that minimise total heat transfer area. Optimal design based on real data was performed and the operating function of exhaust gases by-pass control was obtained and is presented. (author)

  16. Industrial ammonia absorption refrigeration plants in combination with gas engines; Groupes de refrigeration industriels a absorption d'ammoniac combines avec des moteurs a gaz

    Energy Technology Data Exchange (ETDEWEB)

    Bassols, J. [Colibri bv (Netherlands); Sahu, J. [Gas Natural SDG, S.A. (Spain)

    2000-07-01

    In many industrial sectors, co-generation systems with gas turbines or engines and ammonia absorption refrigeration plants are being introduced for the simultaneous production of electricity and refrigeration in order to meet the energy requirements inherent to each process and to reduce the operating costs. The different possibilities to link the absorption refrigeration plant to the cogeneration system and to the consumers are described. Different examples of realised projects are used to illustrate the different systems. Despite the fact that, compared to compression refrigeration machines, ARP's have lower COP (coefficient of performance) and higher investment costs, the advantage of using thermal energy as a driving energy instead of electricity makes the combination cogeneration-ARP very attractive. The plants can easily be integrated into an existing refrigeration installation. The full automatic control systems provide a trouble-free operation. Because most of the components of an ARP are heat exchangers, the plants only need little maintenance and are not susceptible to trouble. For their maintenance, no special knowledge is necessary. Plants working with NH{sub 3}-H{sub 2}O use ammonia as a refrigerant, which is a natural and environment-friendly fluid. (authors)

  17. The use of absorption refrigeration systems in combined cycle power plants; Empleo de sistemas de refrigeracion por absorcion en plantas de ciclo combinado

    Energy Technology Data Exchange (ETDEWEB)

    Romero Paredes, H.; Ambriz, J.J.; Vargas, M.; Godinez, M.; Gomez, F.; Valdez, L.; Pantoja, G. [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Departamento de Ingenieria de Procesos e Hidraulica, Mexico D. F. (Mexico)

    1995-12-31

    Day after day the electric power generation tends to be done in the most efficient way in order to diminish the generation costs and the rate of environmental pollution per KWh generated. This paper discusses the application of absorption refrigeration systems for the cooling of the air entering the compressor of a gas turbine in a combined cycle, in order to increase the mass air flow and with it the turbine output. The flows with remanent energy content that are not used in a combined cycle can be used for the operation of the absorption refrigeration system. This way, the required thermal energy for the cooling system is free. With this system it is possible to raise the gas turbine generation output from 5% to 25%. [Espanol] La generacion electrica dia con dia pretende realizarse de la manera mas eficiente posible con el objeto de disminuir los costos de generacion y la tasa de contaminacion ambiental por Kwh generado. En el presente trabajo se introduce la aplicacion de sistemas de refrigeracion por absorcion para el enfriamiento del aire de entrada al compresor de la turbina de gas de un ciclo combinado, con el objeto de aumentar el flujo masico del aire y con ello la potencia de salida de la turbina. Las corrientes con contenido remanente de energia termica que no se usan en una planta de ciclo combinado pueden servir para operar el sistema de refrigeracion por absorcion. De esta manera, la energia termica requerida para el sistema de enfriamiento es gratuita. Con este sistema es posible incrementar la potencia de generacion de la turbina de gas de 5 a 25%.

  18. Thermodynamic Analysis of the Irreversibilities in Solar Absorption Refrigerators

    Directory of Open Access Journals (Sweden)

    Emma Berrich Betouche

    2016-03-01

    Full Text Available A thermodynamic analysis of the irreversibility on solar absorption refrigerators is presented. Under the hierarchical decomposition and the hypothesis of an endoreversible model, many functional and practical domains are defined. The effect of external heat source temperature on the entropy rate and on the inverse specific cooling load (ISCL multiplied by the total area of the refrigerator A/Qe are studied. This may help a constructor to well dimension the solar machine under an optimal technico-economical criterion A/Qe and with reasonable irreversibility on the refrigerator. The solar concentrator temperature effect on the total exchanged area, on the technico-economical ratio A/Qe, and on the internal entropy rate are illustrated and discussed. The originality of these results is that they allow a conceptual study of a solar absorption refrigeration cycle.

  19. Calculation procedure to determine average mass transfer coefficients in packed columns from experimental data for ammonia-water absorption refrigeration systems

    Energy Technology Data Exchange (ETDEWEB)

    Sieres, Jaime; Fernandez-Seara, Jose [University of Vigo, Area de Maquinas y Motores Termicos, E.T.S. de Ingenieros Industriales, Vigo (Spain)

    2008-08-15

    The ammonia purification process is critical in ammonia-water absorption refrigeration systems. In this paper, a detailed and a simplified analytical model are presented to characterize the performance of the ammonia rectification process in packed columns. The detailed model is based on mass and energy balances and simultaneous heat and mass transfer equations. The simplified model is derived and compared with the detailed model. The range of applicability of the simplified model is determined. A calculation procedure based on the simplified model is developed to determine the volumetric mass transfer coefficients in the vapour phase from experimental data. Finally, the proposed model and other simple calculation methods found in the general literature are compared. (orig.)

  20. Refrigeration Playbook: Natural Refrigerants; Selecting and Designing Energy-Efficient Commercial Refrigeration Systems That Use Low Global Warming Potential Refrigerants

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Caleb [CTA Architects Engineers, Boise, ID (United States); Reis, Chuck [CTA Architects Engineers, Boise, ID (United States); Nelson, Eric [CTA Architects Engineers, Boise, ID (United States); Armer, James [CTA Architects Engineers, Boise, ID (United States); Arthur, Rob [CTA Architects Engineers, Boise, ID (United States); Heath, Richard [CTA Architects Engineers, Boise, ID (United States); Rono, James [CTA Architects Engineers, Boise, ID (United States); Hirsch, Adam [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Doebber, Ian [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-03-01

    This report provides guidance for selecting and designing energy efficient commercial refrigeration systems using low global warming potential refrigerants. Refrigeration systems are generally the largest energy end use in a supermarket type building, often accounting for more than half of a building's energy consumption.

  1. Determination of a Vapor Compression Refrigeration System Refrigerant Charge

    Institute of Scientific and Technical Information of China (English)

    YangChun-Xin; DangChao-Bin

    1995-01-01

    A physical model is established in this paper to describe the heat transfer and two phase flow of a refrigerant in the evaporator and condenser of a vapor compression refrigeration system.The model in then used to determine the refrigerant charge in vapor compression units.The model is used for a sensitivity analysis to determine the effect that varing design parameters on the refrigerant charge,The model is also used to evaluate the effect of refrigerant charge and the thermal physical properties on the refrigeration cycle,The predicted value of the refigerant charge and experimental data agree well The model and the method presented in this paper could be used to design vapour compression units such as domestic refrigeratirs and air conditioners.

  2. Energy and Exergy Analysis of Vapour Absorption Refrigeration Cycle—A Review

    Science.gov (United States)

    Kanabar, Bhaveshkumar Kantilal; Ramani, Bharatkumar Maganbhai

    2016-07-01

    In recent years, an energy crisis and the energy consumption have become global problems which restrict the sustainable growth. In these scenarios the scientific energy recovery and the utilization of various kinds of waste heat become very important. The waste heat can be utilized in many ways and one of the best practices is to use it for vapour absorption refrigeration system. To ensure efficient working of absorption cycle and utilization of optimum heat, exergy is the best tool for analysis. This paper provides the comprehensive picture of research and development of absorption refrigeration technology, practical and theoretical analysis with different arrangements of the cycle.

  3. 渔船氨水吸收式制冷系统的建模和理论运行特性分析%Simulation and theoretical operation characteristics analysis of ammonia-water absorption refrigeration system for fishing boat

    Institute of Scientific and Technical Information of China (English)

    倪锦; 顾锦鸿; 沈建

    2012-01-01

    根据渔船节能减排的需求,设计了一种新型的渔船氨水吸收式制冷系统,利用渔船余热实现渔船的制冰、蓄冷和工作区域供冷,解决了渔船上鱼类的保鲜和冷藏,改善船上工作环境.建立了渔船氨水吸收式制冷的热力学模型和性能评价指标,在此基础上采用序贯模块法迭代求解,实现了渔船氨水吸收式制冷系统的仿真,同时进一步研究了不同操作条件下制冷系统的运行特性,最终获得了烟气温度、流量和三通阀开度等参数变化时各用户端功率的变化规律.该系统模型可指导渔船制冷系统的功率分配,为优化渔船制冷系统的运行参数、实现低碳渔船提供理论基础.%A new type of fishing boat ammonia-water absorption refrigeration system considering the characteristics of fishing boat was designed.It drove by exhaust gas from the fishing boat's engine,it could realize ice-making,cool storage and environment cooling,the fishing boat refrigeration system could not only serve for fish cold storage and fish fresh-keeping,but also serve for fishing boat's environment cooling.The thermodynamic mathematical model and evaluation index for fishing boat ammonia-water absorption refrigeration system were established,the sequential modular approach was applied to solving ammonia-water absorption refrigeration system,so the simulation of ammonia-water absorption refrigeration system for fishing boat was realized.The refrigeration system's operation characteristics under different gas parameters and different three-way valve's operating conditions were investigated,Results shown that the system's operation characteristics could not only give fishing boat refrigeration system's power assignment,but also lay theoretical foundation for fishing boat refrigeration system's operation optimization and low carbon emission fishing boat.

  4. Comparison of the Performances of NH3-H20 and Libr-H2O Vapour Absorption Refrigeration Cycles

    Directory of Open Access Journals (Sweden)

    Prof. Nilesh B. Totla

    2016-04-01

    Full Text Available Developments in absorption cooling technology present an opportunity to achieve significant improvements on micro-scale to buildings, cooling, heating and power systems for residential and light commercial buildings. Their resultant effects are effective, energy efficient and economical. This study therefore contributes an important knowledge and method in the development, fabrication and application of an absorption refrigerator as a better alternative to the commonly used compressor refrigerators. Two fluid gas absorption refrigerators use electric based heater installed generator and no moving parts, such as pumps and compressors, and operate at a single system pressure. In this paper the performances analysis of the NH3-H2O and possible alternative cycles as lithium bromide-water are compared in respect of the (COP and different operating conditioning. The highest COP was found as a function of the absorber, generator, condenser, and evaporating temperature. This paper compares the performance of vapour absorption refrigeration cycles that are used for refrigeration temperatures below 0°C. Since the most common vapour absorption refrigeration systems use ammonia-water solution with ammonia as the refrigerant and water as the absorbent, research has been devoted to improvement of the performance of ammonia-water absorption refrigeration systems in recent years.

  5. Cavity-enhanced absorption for optical refrigeration

    CERN Document Server

    Seletskiy, Denis V; Sheik-Bahae, Mansoor

    2009-01-01

    A 20-fold increase over the single path optical absorption is demonstrated with a low loss medium placed in a resonant cavity. This has been applied to laser cooling of Yb:ZBLAN glass resulting in 90% absorption of the incident pump light. A coupled-cavity scheme to achieve active optical impedance matching is analyzed.

  6. Indirect refrigeration systems with natural refrigerants

    DEFF Research Database (Denmark)

    Knudsen, Hans Jørgen Høgaard; Christensen, Kim Gardø; Jensen, Per Henrik

    1998-01-01

    heat exchanger with carbon dioxide on the shell side and flow ice inside the tubes has been used to investigate the heat transfer for condensing carbon dioxide.At leats is mentioned results obtained with a frozen food display case using carbone dioxide as refrigerant.......Heat transfer for boiling and condensing carbon dioxide has been investigated.Heat transfer for carbon dioxide evaporating inside pipe has been measured and compared with Shah's correlation. The measured heat transfer coefficient is much higher than the value determined with the correlation.A shell-and-tube...

  7. Performance Characteristics of Hybrid Cycle Combined Absorption Heat Transformer and Absorption Refrigerating Machine

    Science.gov (United States)

    Iyoki, Shigeki; Otsuka, Shin-Ichi; Uemura, Tadashi

    In this paper, four kinds of hybrid cycles which combined the single-stage absorption refrigerating machine and four kinds of absorption heat transformers were proposed. It is possible that each of these hybrid cycles gets high temperature and low temperature from one cycle, simultaneously. As basic cycle of absorption heat transformer, the following were chosen: two kinds of single-stage absorption heat transformer and two kinds of two-stage absorption heat transformer. As a working medium-absorbent system, H2O-LiBr system, H2O-LiBr-LiNO3 system, H2O-LiBr-LiNO3-LiCl system, H2O-LiBr-C2H6O2 system and H2O-LiNO3-LiCl system were adopted. Using these five kinds of working medium-absorbent system, the performance characteristics of four kinds of hybrid cycle were simulated. And the performance characteristics of these cycles were compared.

  8. 利用汽车余热的吸收式制冷系统的研究%Study on LiBr Absorption Refrigeration System with Automotive Engines’ Exhausted Heat

    Institute of Scientific and Technical Information of China (English)

    李小华; 唐景立

    2013-01-01

      根据奇瑞A3轿车空调系统和冷却水及排气系统的结构特点,结合溴化锂吸收式制冷系统的工作原理,提出将汽车排气管和发动机冷却水箱进行结构改造作为溴化锂吸收式制冷机的发生器,代替传统的汽车空调系统和发动机的冷却系统。并应用工程热力学、传热学和流体力学的方法对溴化锂吸收式制冷机和现有的空调系统进行热力计算和各传热设备的传热面积计算,并进行了比较,结果表明:单效溴化锂吸收式冷热水机组在汽车空调系统中的应用是可行的,并且溴化锂制冷机组结构紧凑,使原有的汽车空调系统小型化。%Based on the structure and characteristic of automotive refrigeration system and engine circulation cooling water system and exhausted heat system, combing the working principle of lithium bromide absorption refrigeration system, the authors used the automotive exhaust pipe and cooling water tank improved as the generator of the lithium bromide absorption refrigeration system, which might realize the objective with the lithium bromide absorption hot-cold water unit to replace the automobile air conditioning refrigeration and heating system and the automobile engine cooling system. The methods of thermodynamics, heat transfer, and hydrodynamics are used to do the computation of the thermodynamic and the heat transfer area of the lithium bromide absorption refrigeration system. And has carried on the comparison with the existing air-conditioning system, the results show LiBr Absorption Refrigeration System with Automotive Engines’ Exhausted Heat is feasible, and its system structure is simple.

  9. REDUCING REFRIGERANT EMISSIONS FROM SUPERMARKET SYSTEMS

    Science.gov (United States)

    Large refrigeration systems are found in several applications including supermarkets, cold storage warehouses, and industrial processes. The sizes of these systems are a contributing factor to their problems of high refrigerant leak rates because of the thousands of connections, ...

  10. Refrigerant recycling apparatus, method and system

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, J.P.; Gordon, R.F.

    1993-07-13

    A refrigerant recycling apparatus for recovery and purification of refrigerant is described comprising: (a) an input conduit system for connecting a refrigerant source to the refrigerant recycling apparatus; (b) a first disposable filter capable of removing moisture and particulates from the refrigerant, said disposable filter being located such that the filter is easily accessible for service; (c) a primary heat exchanger configured so as to provide heat to the refrigerant thereby causing the refrigerant to be vaporized; (d) a secondary heat exchanger for further heating of the refrigerant to further assist in vaporization of the refrigerant; (e) an expansion valve located prior in line to said primary and secondary heat exchangers for controlling the flow of the refrigerant and reducing the pressure of the refrigerant, thereby allowing the refrigerant to expand to a predominantly gaseous state; (f) a separator for removing oil from the refrigerant; (g) a compressor pump having a vacuum producing inlet and a pressure producing outlet, the pump being a hermetically sealed, lubricated-for-life positive displacement pump; (h) a condenser for cooling the refrigerant; (i) a second disposable filter for removing moisture, acids, and other particulates from the refrigerant passing there through, said disposable filter being located in an area easily accessible for servicing; (j) an interconnecting conduit system for interconnecting the input conduit system, the first and second disposable filters, the heat exchangers, the compressor pump, the condenser, the expansion valve, and the refrigerant source; (k) a moisture indicator located after the second disposable filter, for measuring the degree of moisture present within the refrigerant after the refrigerant has flowed through the second disposable filter.

  11. High Efficiency, Low Emission Refrigeration System

    Energy Technology Data Exchange (ETDEWEB)

    Fricke, Brian A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Building Technologies Research and Integration Center; Sharma, Vishaldeep [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Building Technologies Research and Integration Center

    2016-08-01

    Supermarket refrigeration systems account for approximately 50% of supermarket energy use, placing this class of equipment among the highest energy consumers in the commercial building domain. In addition, the commonly used refrigeration system in supermarket applications is the multiplex direct expansion (DX) system, which is prone to refrigerant leaks due to its long lengths of refrigerant piping. This leakage reduces the efficiency of the system and increases the impact of the system on the environment. The high Global Warming Potential (GWP) of the hydrofluorocarbon (HFC) refrigerants commonly used in these systems, coupled with the large refrigerant charge and the high refrigerant leakage rates leads to significant direct emissions of greenhouse gases into the atmosphere. Methods for reducing refrigerant leakage and energy consumption are available, but underutilized. Further work needs to be done to reduce costs of advanced system designs to improve market utilization. In addition, refrigeration system retrofits that result in reduced energy consumption are needed since the majority of applications address retrofits rather than new stores. The retrofit market is also of most concern since it involves large-volume refrigerant systems with high leak rates. Finally, alternative refrigerants for new and retrofit applications are needed to reduce emissions and reduce the impact on the environment. The objective of this Collaborative Research and Development Agreement (CRADA) between the Oak Ridge National Laboratory and Hill Phoenix is to develop a supermarket refrigeration system that reduces greenhouse gas emissions and has 25 to 30 percent lower energy consumption than existing systems. The outcomes of this project will include the design of a low emission, high efficiency commercial refrigeration system suitable for use in current U.S. supermarkets. In addition, a prototype low emission, high efficiency supermarket refrigeration system will be produced for

  12. Refrigeration system having dual suction port compressor

    Science.gov (United States)

    Wu, Guolian

    2016-01-05

    A cooling system for appliances, air conditioners, and other spaces includes a compressor, and a condenser that receives refrigerant from the compressor. The system also includes an evaporator that receives refrigerant from the condenser. Refrigerant received from the condenser flows through an upstream portion of the evaporator. A first portion of the refrigerant flows to the compressor without passing through a downstream portion of the evaporator, and a second portion of the refrigerant from the upstream portion of the condenser flows through the downstream portion of the evaporator after passing through the upstream portion of the evaporator. The second portion of the refrigerant flows to the compressor after passing through the downstream portion of the evaporator. The refrigeration system may be configured to cool an appliance such as a refrigerator and/or freezer, or it may be utilized in air conditioners for buildings, motor vehicles, or other such spaces.

  13. 溴化锂吸收式制冷机模拟实验教学系统设计%Design of simulating experimental teaching system for LiBr absorption-type refrigerating machines

    Institute of Scientific and Technical Information of China (English)

    王美霞; 邵莉; 韩吉田

    2011-01-01

    A simulation experimental system for absorption-type refrigerating machines was designed based on the ACAD and Visual Basic software. The use of the system can not only complete structure model of absorption-type refrigerating machine and thermal calculation for the absorption-type refrigerating cycle, but also simulate the PID control system and realize intelligent controls. The experimental system has the friendly man-machine interface beneficial to the students' operating and understanding, thereby decreasing the students' difficulties in learning and improving the experiment teaching effect.%利用ACAD和Visual Basic软件对溴化锂吸收式制冷机组进行实验教学仿真系统设计,可以完成机组结构剖析、循环热力计算和控制回路模拟等演示实验.实验系统采用友好的人机交互界面,便于操作和理解,既降低了学习难度,又提高了实验教学的效果.

  14. Status of field testing of a small absorption refrigerating machine; Stand der Felderprobung einer Kleinabsorptions-Kaeltemaschine

    Energy Technology Data Exchange (ETDEWEB)

    Safarik, M.; Richter, L. [Institut fuer Luft- und Kaeltetechnik GmbH, Dresden (Germany); Weidner, G.; Otto, M. [EAW Energieanlagenbau GmbH, Westenfeld (Germany); Naumann, F.; Moeckel, F. [Hochschule fuer Technik, Wirtschaft und Kultur Leipzig (F.H.) (Germany)

    2005-07-01

    The performance efficiency and the reliability of the small absorption refrigerating machine WGRACL SE 15 are investigated by the scientific study of three plants in real operation. The systems distinguish themselves by peripheral components which allow gaining experience with the use of absorption refrigerating machines under different frame conditions. One plant could already be operated with good results during the summer 2005. Further results are expected for the cold season 2006. (orig.)

  15. Prediction of refrigerant absorption and onset of natural convection in lubricant oil

    Energy Technology Data Exchange (ETDEWEB)

    Barbosa, Jader R.; Marcelino Neto, Moises A. [Department of Mechanical Engineering, Federal University of Santa Catarina, Florianopolis, SC 88040900 (Brazil); Thoma, Stefan M. [Department of Mechanical and Process Engineering, Swiss Federal Institute of Technology, Sonneggstrasse 3, 8092 Zurich (Switzerland)

    2008-11-15

    Refrigerant absorption and mixing in lubricant oil are important in the design of refrigeration compressors and refrigeration systems. Experimental work is reported on absorption of R-134a vapour through the top interface of an initially stagnant layer of pure lubricant oil. Since the liquid refrigerant is heavier than the oil, mixing is enhanced due to natural mass convection. In the present paper, the behaviour of the liquid temperature during absorption is described based on measurements carried out in a test rig consisting of a transparent 70 mm ID, 150 mm long, vertical glass tube through which absorption can be directly observed. Transient liquid temperatures were measured at three different heights in the test section (two in the vapour, one in the liquid). The experimental work is complemented by a theoretical analysis of the critical time for the onset of mass transfer induced Rayleigh instability. The model is based on a critical mass transfer Rayleigh number criterion widely reported in the literature and takes into account the variation of physical properties in the liquid layer. The critical time for the onset of natural mass convection increases with decreasing system pressure as a result of a lower equilibrium concentration at the vapour-liquid interface. (author)

  16. Cogeneration with gas turbine associated to the absorption refrigeration system: a computer program for exergy economics analysis; Cogeracao com turbina a gas associada ao sistema de refrigeracao por absorcao: um programa computacional para analise exergoeconomica

    Energy Technology Data Exchange (ETDEWEB)

    Antunes, Julio Santana [UNESP, Guaratingueta, SP (Brazil). Faculdade de Engenharia. Dept. de Matematica] E-mail: santana@feg.unesp.br; Silveira, Jose Luz; Balestieri, Jose Antonio Perrella [UNESP, Guaratingueta, SP (Brazil). Faculdade de Engenharia. Dept. de Energia

    2000-07-01

    This paper presents the development of a computer program for exergy and economic analysis of cogeneration systems applying gas turbine associated to the absorption refrigeration system. The computer program selects gas turbine systems viewing the operation under thermal parity through a data base composed by gas turbines commercially available in the market, under the ISO (International Standard Organization). The computer program corrects the system performance parameters selected for the installation local conditions. The exergy and economic analysis are made based on the lowest exergy manufacturing cost where the best system is considered. A case study of the computer program application is presented.

  17. Geothermal absorption refrigeration for food processing industries. Final report, December 13, 1976--November 13, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Harris, R.L.; Olson, G.K.; Mah, C.S.; Bujalski, J.H.

    1977-11-01

    The first step in the economic analysis of the integration of geothermally powered absorption refrigeration into a food processing plant was an evaluation of the potential geothermal sites in the Western United States. The evaluation covered availability of raw materials, transportation, adequate geothermal source, labor, and other requirements for food processing plants. Several attractive geothermal sites were identified--Raft River, Idaho; Sespe Hot Springs, California; Vale Hot Springs, Oregon; Weisler-Crane Creek, Idaho; Cosco Hot Springs, California; and the Imperial Valley, California. The most economically attractive food processing industry was then matched to the site based on its particular energy, raw material, and transportation requirements. The more promising food processors identified were for frozen potato or vegetable products, freeze-dried products, and meat processing. For the refrigeration temperature range of +32/sup 0/F to -40/sup 0/F and geothermal temperature range of 212/sup 0/F to 300/sup 0/F, an absorption refrigeration system had to be identified, designed, and evaluated. Both the conventional ammonia/water and an organic absorption refrigeration system using monochlorodifluoromethane (R-22) as the refrigerant and dimethyl formamide (DMF) as the absorbent were studied. In general, only a 60/sup 0/F to 100/sup 0/F temperature drop would be effectively used for refrigeration leaving the remainder of the allowable temperature drop available for other use. The economic evaluation of the geothermal system installed in a food processing plant required the comparison of several principal alternatives. These alternatives were evaluated for three different food processing plants located at their optimum geothermal site: a forzen potato product processing plant located at Raft River, Idaho; a freeze-dried product plant located at Sespe Hot Springs, California; a beef slaughter operation located in the Imperial Valley of California. (JGB)

  18. Heat Transfer Performance for Evaporator of Absorption Refrigerating Machine

    Science.gov (United States)

    Kunugi, Yoshifumi; Usui, Sanpei; Ouchi, Tomihisa; Fukuda, Tamio

    An experiment was conducted to check the heat transfer performance of evaporators with grooved tubes for absorption refrigerating machines. Heat transfer rate of evaporators were 35kW and 70kW. The range of the flow rate of the sprayed refrigerant per unit length Γ was 1 to 50kg/hm, and the outside diameters of the tubes, D0 were 16 and 19.6 mm. About 80 to 100 % increase of heat transfer rate over a plane surfaced tube is obtained by using grooved tube. The heat transfer coefficients for evaporation are correlated by the equation αE0=(Γ/D0)1/2. The substantial surface area, which is about three times larger than that of plane surfaced tube, is used in the above correlation.

  19. Industrial refrigeration by absorption/compression; Refrigeracion industrial por absorcion/compresion

    Energy Technology Data Exchange (ETDEWEB)

    Ayala Delgado, Ramon; Heard, Christopher Lionel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    The use of the absorption/compression refrigeration in the industrial area is analyzed. It is estimated than in Mexico 50% of the food is wasted for lack of refrigeration in the producing centers and by the inefficient distribution system, as well as for the hot climate. The functioning of the absorption refrigeration and the hybrid system absorption/compression which can operate with the two thermodynamic cycles in variable proportions, depending on the specific application, looking for operational advantages and energy efficiency is described. This type of technology could be applied in Mexico due to the lack of industrial refrigeration and to the need of substituting compressors in some companies which have up to 20 years of use [Espanol] Se analiza el uso de la refrigeracion por absorcion/compresion en el area industrial. En Mexico se estima que se desperdicia el 50% de los alimentos por falta de refrigeracion en los centros productores y por el deficiente sistema de distribucion, asi como por el clima calido. Se describe el funcionamiento de la refrigeracion por absorcion y la refrigeracion por absorcion/compresion o sistema hibrido, el cual puede funcionar con los dos tipos de ciclos termodinamicos, en proporciones variables, dependiendo de la aplicacion especifica, buscando ventajas de operacion y eficiencia energetica. Este tipo de tecnologia podria aplicarse en Mexico debido a la falta de refrigeracion industrial y a la necesidad de sustituir compresores en algunas empresas los cuales tienen hasta 20 anos de uso

  20. Research on performance of mixed absorption refrigeration for solar air-conditioning

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    A novel lithium bromide/water mixed absorption refrigeration cycle that is suitable for the utilization of solar air-conditioning and can overcome the drawbacks of low system overall efficiency of traditional solar absorption refrigeration air-condition systems is presented.The accessorial high pressure generator was added in the cycle.The lithium bromide solution flowing out from the high pressure generator was mixed with the solution from the low pressure absorber to increase lithium bromide solution concentration and decrease pressure in the high pressure absorber.The performance of a mixed absorption refrigeration cycle was analyzed.The theoretical analysis shows that the highest COP is 0.61,while the highest available temperature difference of heat resource is 33.2℃.The whole coefficient of performance of the solar air-conditioning using mixed absorption cycle is 94.5% higher than that of two-stage absorption.The advantages of solar air-conditioning can be markedly made use of by the cycle.

  1. Heat Transfer Performance of Absorber of Absorption Refrigerating Machine

    Science.gov (United States)

    Kunugi, Yoshifumi; Ouchi, Tomihisa; Usui, Sanpei; Fukuda, Tamio

    Experimental studies on heat transfer performance of absorber for lithium bromide-water absorption refrigerating machine are presented in this paper. Experimental apparatus for 35 kW evaporator and absorber, and outer grooved tubes are used. As a result, over-al1 coefficient of heat transmission of absorber has a maximum value, in the case of heat transfer area ratio of absorber to evaporator, is about 0.8. Heat transfer rate of absorber is increased by 60% by using the outer grooved tube compared with the plane surfaced tube.

  2. Design and Simulation of an Absorption Diffusion Solar Refrigeration Unit

    Directory of Open Access Journals (Sweden)

    B. Chaouachi

    2007-01-01

    Full Text Available The purpose of this study was the design and the simulation of an absorption diffusion refrigerator using solar as source of energy, for domestic use. The design holds account about the climatic conditions and the unit cost due to technical constraints imposed by the technology of the various components of the installation such as the solar generator, the condenser, the absorber and the evaporator. Mass and energy conservation equations were developed for each component of the cycle and solved numerically. The obtained results showed, that the new designed mono pressure absorption cycle of ammonia was suitable well for the cold production by means of the solar energy and that with a simple plate collector we can reach a power, of the order of 900 watts sufficient for domestic use.

  3. Evaluation of Enthalpy Diagrams for NH3-H2O Absorption Refrigerator

    Science.gov (United States)

    Takei, Toshitaka; Saito, Kiyoshi; Kawai, Sunao

    The protection of environment is becoming a grave problem nowadays and an absorption refrigerator, which does not use fleon as a refrigerant, is acquiring a close attention. Among the absorption refrigerators, a number of ammonia-water absorption refrigerators are being used in realm such as refrigeration and ice accumulation, since this type of refrigerator can produce below zero degree products. It is essential to conduct an investigation on the characteristics of ammonia-water absorption refrigerator in detail by means of computer simulation in order to realize low cost, highly efficient operation. Unfortunately, there have been number of problems in order to conduct computer simulations. Firstly, Merkel's achievements of enthalpy diagram does not give the relational equations. And secondly, although relational equation are being proposed by Ziegler, simpler equations that can be applied to computer simulation are yet to be proposed. In this research, simper equations based on Ziegler's equations have been derived to make computer simulation concerning the performance of ammonia-water absorption refrigerator possible-Both results of computer simulations using simple equations and Merkel's enthalpy diagram respectively, have been compared with the actual experimental data of one staged ammonia-water absorption refrigerator. Consequently, it is clarified that the results from Ziegler's equations agree with experimental data better than those from Merkel's enthalpy diagram.

  4. Water- Lithium Bromide-γ- Butyrolactone Absorption Refrigerating Machine

    Science.gov (United States)

    Iyoki, Shigeki; Uemura, Tadashi

    This investigation was carried out in order to find corrosion inhibitors which would be effective in controlling the corrosion for the water-lithium bromide-γ-butyrolactone (20 moles water/1 mole γ-butyrolactone) absorption refrigerating machine. The experiments were carried out on continuous boiling test, intermittent boiling test and galvanic corrosion test with the use of organic inhibitors and inorganic inhibitors in γ-butyrolactone aqueous solution of lithium bromide. The metals used in these corrosion tests were mainly SS 41 and copper. From these experimental results, the most suitable corrosion inhibitors for SS 41 and copper in γ-butyrolactone aqueous solution of lithium bromide Were recognized to be benzotriazole, tolyltriazole and lithium molybdate.

  5. Two-phase flow in refrigeration systems

    CERN Document Server

    Gu, Junjie; Gan, Zhongxue

    2013-01-01

    Two-Phase Flow in Refrigeration Systems presents recent developments from the authors' extensive research programs on two-phase flow in refrigeration systems. This book covers advanced mass and heat transfer and vapor compression refrigeration systems and shows how the performance of an automotive air-conditioning system is affected through results obtained experimentally and theoretically, specifically with consideration of two-phase flow and oil concentration. The book is ideal for university postgraduate students as a textbook, researchers and professors as an academic reference book, and b

  6. 46 CFR 151.40-11 - Refrigeration systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Refrigeration systems. 151.40-11 Section 151.40-11... Refrigeration systems. (a) Boiloff systems. The venting of cargo boiloff to atmosphere shall not be used as a...) Vapor compression, tank refrigeration, and secondary refrigeration systems: The required...

  7. Available energy analysis of new tandem double-capillary tube refrigeration system for refrigerator-freezers

    Institute of Scientific and Technical Information of China (English)

    Maogang HE; Xinzhou SONG; Ying ZHANG; Jiantao ZHANG

    2008-01-01

    A new tandem double-capillary tube refri-geration system for refrigerator-freezers is proposed. A capillary tube was added between the two evaporators in the fresh and frozen food storage chests to raise the evaporation temperature of the refrigerating chamber, and reduce the heat exchange temperature difference and the available energy loss. Peng-Robinson (P-R) equation of state was adopted to calculate the thermodynamic properties of the refrigerants, and the available energy analysis of the vapor compression refrigeration cycle was programmed to calculate the thermodynamic perfor-mances of the new and the conventional refrigeration cycle of the refrigerator-freezer. The calculation results show that the available energy efficiency of the conven-tional refrigeration cycle of the refrigerator-freezer is 21.20% and 20.57%, respectively when the refrigerant is R12 and R134a, while that of the double-capillary tube refrigeration cycle of the refrigerator-freezer is 23.97% and 23.44%, respectively. By comparison, the available energy efficiency of the new refrigeration system increases by 13.07% and 13.95%, respectively.

  8. Defrost Temperature Termination in Supermarket Refrigeration Systems

    Energy Technology Data Exchange (ETDEWEB)

    Fricke, Brian A [ORNL; Sharma, Vishaldeep [ORNL

    2011-11-01

    The objective of this project was to determine the potential energy savings associated with implementing demand defrost strategies to defrost supermarket refrigerated display case evaporators, as compared to the widely accepted current practice of controlling display case defrost cycles with a preset timer. The defrost heater energy use of several representative display case types was evaluated. In addition, demand defrost strategies for refrigerated display cases as well as those used in residential refrigerator/freezers were evaluated. Furthermore, it is anticipated that future work will include identifying a preferred defrost strategy, with input from Retail Energy Alliance members. Based on this strategy, a demand defrost system will be designed which is suitable for supermarket refrigerated display cases. Limited field testing of the preferred defrost strategy will be performed in a supermarket environment.

  9. Fermilab energy saver refrigeration system tests

    Energy Technology Data Exchange (ETDEWEB)

    Theilacker, J.; Rode, C.; Makara, J.; Richied, D.; Leninger, M.; Ferry, R.; Mizicko, D.; Misek, J.

    1981-06-01

    The Energy Saver Refrigeration System is based on the concept of a central helium liquefier (5000 l/hr) providing liquid to 24 satellite refrigerators (966 W at 4.6/degree/K), which operate as amplifiers with a gain of 12. This concept was tested, cooling two 125 m long strings of superconducting magnets. The test was run using one satellite refrigerator operating as the ''central liquefier'', shipping liquid helium through a 250 m long transfer line to a second satellite refrigerator, which in turn cooled the magnets. In addition to testing the satellite concept, the heat loads of the magnets and transfer line were also measured. 3 refs.

  10. Design, Fabrication and Performance Evaluation of a Micro-Absorption Refrigerator

    Directory of Open Access Journals (Sweden)

    Hyginus .U. Ugwu

    2012-11-01

    Full Text Available Developments in absorption cooling technology present an opportunity to achieve significant improvements on micro-scale to buildings, cooling, heating and power systems for residential and light commercial buildings. Their resultant effects are effective, energy efficient and economical. This study therefore contributes an important knowledge and method in the development, fabrication and application of an absorption refrigerator as a better alternative to the commonly used compressor refrigerators. In its embodiment, the work focuses on the design and fabrication of the absorption chiller system with low or no vibration since there are virtually no moving parts. Also, it dovetailed into the selection of a suitable refrigerant that is economically friendly in order to reduce or eliminate its ozone depleting effect. Consequently, the design was fabricated using adapted locally sourced materials. This is to encourage local ingenuity and to reduce cost of production comparable to already made custom-imported ones. It is designed to be simple, handy and readily available to be used by anyone in case of malfunctioning and for easy relocation. Though, the main limitation of the system fabricated is the long time it uses to achieve cooling, the performance of the machine generally is very efficient as its calculated coefficient of performance ( C.O.P is 1.21, which compared favourably well with the literature value of 1.00-2.00. Also, the total cost including an over-head of 30% of the machine was estimated at forty-one thousand, two hundred and fifty-nine (N41,259.40 naira, forty kobo only based on current price structure compared to an equivalent custom-made-imported type estimated at between sixty to seventy thousand (N60,000.00 to N70,000.00 naira. Hence, the machine is affordable to all, and is highly recommended for local entrepreneurs for mass production because of its cost effectiveness, simplicity and availability of spare parts.

  11. TFE-TEGDME-He扩散-吸收式制冷系统实验研究%Experimental study on a diffusion absorption refrigeration system working with TFE-TEGDME-He

    Institute of Scientific and Technical Information of China (English)

    孟凡基; 龙臻; 李华山; 卜宪标; 马伟斌

    2014-01-01

    An experimental study on a water-cooled diffusion-absorption refrigeration (DAR) machine working with TFE (2,2,2-Trifluoroethanol) as refrigerant,TEGDME (Tetraethylene Glycol Dimethyl Ether) as absorber and helium as the auxiliary inert gas was presented.It was found that when the heating temperature reaches 112 ~ 135 ℃,the averaged cooling capacity is about 0.32kW with a maximum value of 0.58kW.The actual heat transfer coefficient of each heat exchanger component is obtained,which is very helpful for further development of the DAR system with kW-level cooling capacity.%建立了一套以TFE(三氟乙醇)为制冷剂,TEGDME(二甲醚四甘醇)为吸收剂,He(氦气)为压力平衡剂的水冷式扩散-吸收制冷系统,并进行实验研究.结果表明,当热水温度达到112~135℃时,机组可正常制冷,平均制冷功率约0.32kW,最大达0.58kW;同时获取了各换热器的实际传热系数,为kW级扩散-吸收式制冷机组的设计提供理论基础.

  12. Thermodynamic evaluation of new absorbent mixtures of lithium bromide and organic salts for absorption refrigeration machines

    Energy Technology Data Exchange (ETDEWEB)

    Donate, Marina; Rodriguez, Luis; Lucas, Antonio De; Rodriguez, Juan F. [Department of Chemical Engineering, University of Castilla-La Mancha, Avda. de Camilo Jose Cela s/n, 13004 Ciudad Real (Spain)

    2006-01-01

    Mixtures of lithium bromide and organic salts of sodium and potassium (formate, acetate and lactate) have been evaluated as alternative absorbents for absorption refrigeration machines. The main objective is to overpass the limitations of lithium bromide and improve the characteristics and the efficiency of the refrigeration cycle. In order to select the mixture that presents better properties for its employment in absorption refrigeration cycles, a thermodynamic analysis have been done. Density, viscosity, enthalpies of dilution, solubility and vapour pressure data of the proposed mixtures have been measured. A simulation program has been developed to evaluate temperatures, heats exchanged in the different sections and the efficiency of the cycle. (author)

  13. Systematic modelling and simulation of refrigeration systems

    DEFF Research Database (Denmark)

    Rasmussen, Bjarne D.; Jakobsen, Arne

    1998-01-01

    The task of developing a simulation model of a refrigeration system can be very difficult and time consuming. In order for this process to be effective, a systematic method for developing the system model is required. This method should aim at guiding the developer to clarify the purpose of the s......The task of developing a simulation model of a refrigeration system can be very difficult and time consuming. In order for this process to be effective, a systematic method for developing the system model is required. This method should aim at guiding the developer to clarify the purpose...... of the simulation, to select appropriate component models and to set up the equations in a well-arranged way. In this paper the outline of such a method is proposed and examples showing the use of this method for simulation of refrigeration systems are given....

  14. Data-Driven Control of Refrigeration System

    DEFF Research Database (Denmark)

    Vinther, Kasper

    and it is important to keep the variable costs at a minimum and, if possible, offer products which have higher robustness, performance, and functionality than similar products from competitors. However, the multitude of different system configurations, system complexity, component wear, and changing operating...... problems. The method utilizes the qualitative nonlinearity in the system and harmonic analysis of a perturbation signal to reach an unknown, but suitable, operating point. Another important control task in refrigeration systems is to maintain the temperature of the refrigerated space or foodstuff within...

  15. 新型太阳能吸收式制冷循环系统性能分析%ON THE PERFORMANCE ANALYSIS OF A NEW ABSORPTION REFRIGERATION CYCLE SYSTEM FOR SOLAR ENERGY

    Institute of Scientific and Technical Information of China (English)

    刘丽; 孔兵; 张迪凡

    2015-01-01

    On the basis of the traditional two-level lithium bromide absorption refrigeration cycle, considering that the heat can be increased by the temperature difference, this paper proposes a new absorption refrigeration cycle driven by solar energy to an-alyze and calculate the influence of the system thermal coefficient COP as well as available temperature difference made by the heat source under the low-voltage generator pressure (intermediate pressure) and intermediate solution concentration change. The results show that, within the scope of the occurrence of the heat source temperature of 85℃-95℃, the intermediate pressure be-tween 1.6KPa (12mmHg) and 2.2KPa (16.5mmHg) can obtain the new value which has a higher thermodynamic cycle coeffi-cient and the temperature difference of a larger heat source.%在传统两级溴化锂吸收式制冷循环的基础上,从增大热源可利用温差考虑,提出了一种由太阳能驱动的新型吸收式制冷循环,分析计算了低压发生器压力(中间压力)和中间溶液浓度变化对系统热力系数COP和热源可利用温差的影响。结果表明,在发生热源温度85℃~95℃的范围内,中间压力在1.6KPa (12mmHg)和2.2KPa (16.5mmHg)之间取值新型循环有较高的热力系数和较大的热源可利用温差。

  16. Towards High Performance in Industrial Refrigeration Systems

    DEFF Research Database (Denmark)

    Thybo, C.; Izadi-Zamanabadi, Roozbeh; Niemann, H.

    2002-01-01

    Achieving high performance in complex industrial systems requires information manipulation at different system levels. The paper shows how different models of same subsystems, but using different quality of information/data, are used for fault diagnosis as well as robust control design...... in industrial refrigeration systems....

  17. Toward High Performance in Industrial Refrigeration Systems

    DEFF Research Database (Denmark)

    Thybo, C.; Izadi-Zamanabadi, Roozbeh; Niemann, H.

    2002-01-01

    Achieving high performance in complex industrial systems requires information manipulation at different system levels. The paper shows how different models of same subsystems, but using different quality of information/data, are used for fault diagnosis as well as robust control design...... in industrial refrigeration systems....

  18. Functional Nanomaterials Useful for Magnetic Refrigeration Systems

    Science.gov (United States)

    Aslani, Amir

    Magnetic refrigeration is an emerging energy efficient and environmentally friendly refrigeration technology. The principle of magnetic refrigeration is based on the effect of varying a magnetic field on the temperature change of a magnetocaloric material (refrigerant). By applying a magnetic field, the magnetic moments of a magnetic material tend to align parallel to it, and the thermal energy released in this process heats the material. Reversibly, the magnetic moments become randomly oriented when the magnetic field is removed, and the material cools down. The heating and the cooling of a refrigerant in response to a changing magnetic field is similar to the heating and the cooling of a gaseous medium in response to an adiabatic compression and expansion in a conventional refrigeration system. One requirement to make a practical magnetic refrigerator is to have a large temperature change per unit of applied magnetic field, with sufficiently wide operating temperature. So far, no commercially viable magnetic refrigerator has been built primarily due to the low temperature change of bulk refrigerants, the added burden of hysteresis, and the system's low cooling capacity. The purpose of this dissertation is to explore magnetic refrigeration system. First, the Active Magnetic Regenerator (AMR) system built by Shir et al at the GWU's Institute for Magnetics Research (IMR) is optimized by tuning the heat transfer medium parameters and system's operating conditions. Next, by reviewing literature and works done so far on refrigerants, a number of materials that may be suitable to be used in magnetic refrigeration technology were identified. Theoretical work by Bennett et al showed an enhancement in magnetocaloric effect of magnetic nanoparticles. Research was performed on functional magnetic nanoparticles and their use in magnetic refrigeration technology. Different aspects such as the size, shape, chemical composition, structure and interaction of the nanoparticle with

  19. ESO2 Optimization of Supermarket Refrigeration Systems

    DEFF Research Database (Denmark)

    Petersen, Lars Norbert; Madsen, Henrik; Heerup, Christian

    in low efficiency and high wear of the compressor, because the compressor has to work much harder for short periods of time. The problem increases when the load is small compared to the available compressor capacity, which it is in the winter time, at night and when only a few cooling sites are present....... A second solution is investigated where only the compressor control is considered. This controller try to feed-forward the measured disturbances, i.e. opening and closing of the cooling site AKV’s. Last a performance analysis of the refrigeration system is performed.......Supermarket refrigeration systems consists of a number of display cases, cooling cabinets and cold rooms connected to a central compressor pack. This configuration saves energy compared to placing a compressor at each cooling site. The classical control setup of a supermarket refrigeration system...

  20. A LiBr-H2O Absorption Refrigerator Incorporating a Thermally Activated Solution Pumping Mechanism

    Directory of Open Access Journals (Sweden)

    Ian W. Eames

    2017-02-01

    Full Text Available This paper provides an illustrated description of a proposed LiBr-H2O vapour absorption refrigerator which uses a thermally activated solution pumping mechanism that combines controlled variations in generator vapour pressure with changes it produces in static-head pressure difference to circulate the absorbent solution between the generator and absorber vessels. The proposed system is different and potentially more efficient than a bubble pump system previously proposed and avoids the need for an electrically powered circulation pump found in most conventional LiBr absorption refrigerators. The paper goes on to provide a sample set of calculations that show that the coefficient of performance values of the proposed cycle are similar to those found for conventional cycles. The theoretical results compare favourably with some preliminary experimental results, which are also presented for the first time in this paper. The paper ends by proposing an outline design for an innovative steam valve, which is a key component needed to control the solution pumping mechanism.

  1. Compression-absorption (resorption) refrigerating machinery. Modeling of reactors; Machine frigorifique a compression-absorption (resorption). Modelisation des reacteurs

    Energy Technology Data Exchange (ETDEWEB)

    Lottin, O.; Feidt, M.; Benelmir, R. [LEMTA-UHP Nancy-1, 54 - Vandoeuvre-les-Nancy (France)

    1997-12-31

    This paper is a series of transparencies presenting a comparative study of the thermal performances of different types of refrigerating machineries: di-thermal with vapor compression, tri-thermal with moto-compressor, with ejector, with free piston, adsorption-type, resorption-type, absorption-type, compression-absorption-type. A prototype of ammonia-water compression-absorption heat pump is presented and modeled. (J.S.)

  2. Waste Heat Recapture from Supermarket Refrigeration Systems

    Energy Technology Data Exchange (ETDEWEB)

    Fricke, Brian A [ORNL

    2011-11-01

    The objective of this project was to determine the potential energy savings associated with improved utilization of waste heat from supermarket refrigeration systems. Existing and advanced strategies for waste heat recovery in supermarkets were analyzed, including options from advanced sources such as combined heat and power (CHP), micro-turbines and fuel cells.

  3. New refrigeration system using CO2 vapor-solid as refrigerant

    Institute of Scientific and Technical Information of China (English)

    Dongping HUANG; Guoliang DING; Hans QUACK

    2008-01-01

    A refrigerant must be in the vapor-liquid phase in a vapor-compression refrigeration system, therefore, CO2 cannot be used as a refrigerant for temperatures lower than -56℃ because solid CO2 will form under the triple point temperature of -56℃. A refrigeration system with CO2 vapor-solid particles as refrigerant is put forward, by which a temperature lower than the triple point is achieved. An adjustable nozzle, a sublimator, a high-pressure regulating valve and a low-pressure regulat-ing valve are used to replace the conventional evaporator. Theoretical cycle analysis of the refrigeration system shows that its COP can be 50% higher than that of the conventional one.

  4. Evaluation of the column components size on the vapour enrichment and system performance in small power NH{sub 3}-H{sub 2}O absorption refrigeration machines

    Energy Technology Data Exchange (ETDEWEB)

    Sieres, Jaime; Fernandez-Seara, Jose [Area de Maquinas y Motores Termicos, Escuela Tecnica Superior de Ingenieros Industriales, Universidad de Vigo, Vigo (Spain)

    2006-06-15

    This paper presents an analysis of the influence of the distillation column components size on the vapour enrichment and system performance in small power NH{sub 3}-H{sub 2}O absorption machines with partial condensation. It is known that ammonia enrichment is required in this type of systems; otherwise water accumulates in the evaporator and strongly deteriorates the system performance and efficiency. The distillation column analysed consists of a stripping adiabatic section below the column feed point and an adiabatic rectifying packed section over it. The partial condensation of the vapour is produced at the top of the column by means of a heat integrated rectifier with the strong solution as coolant and a water cooled rectifier. Differential mathematical models based on mass and energy balances and heat and mass transfer equations have been developed for each one of the column sections and rectifiers, which allow defining their real dimensions. Results are shown for a given practical application. Specific geometric dimensions of the column components are considered. Different distillation column configurations are analysed by selecting and discarding the use of the possible components of the column and by changing their dimensions. The analysis and comparison of the different column arrangements has been based on the system COP and on the column dimensions. (author)

  5. Hybrid control of the distributed refrigeration system

    DEFF Research Database (Denmark)

    Chen, L.; Wisniewski, R.

    2010-01-01

    The supermarket refrigeration system typically has a distributed control structure, which neglects interactions between its subsystems. These interactions from time to time lead to a synchronization operation of the display-cases which causes an inferior control performance and increased energy...... Lyapunov exponent and a de-synchronization controller by chaotifying the system using the time-delayed impulsive method, essentially a kind of hybrid control. © 2010 IEEE....... consumption. The paper focuses on synchronization dynamics of the refrigeration system modeled as a piecewise-affine switched system. System behaviors are analyzed using chaos theory. The synchronization phenomenon is interpreted as a stable low-period orbit; if the system has a high-order periodic orbit...

  6. Cogen-absorption plants for refrigeration purposes and turbine air inlet cooling

    Energy Technology Data Exchange (ETDEWEB)

    Langreck, Juergen [Colibri bv (Netherlands)

    2000-04-01

    Most cogeneration systems produce power and heat but with absorption refrigeration plants (ARP) the products are power and 'cold'. An ARP driven by heat from a turbine exhaust can provide the cooling for the inlet air with very low consumption of electricity, consequently there is a significant increase in power output from the cogeneration unit. Two different ARP systems are currently available but the author describes only the ammonia-water system, which can achieve temperatures down to -60 degrees C. The article discusses the principle behind ARP, the capital cost and returns on investment, how the cogeneration plant is linked to the ARP, ARP for turbine inlet air cooling, and the potential applications of cogeneration-ARP.

  7. INJECTING ABSORPTION REFRIGERATION CYCLE%引射吸收式制冷循环

    Institute of Scientific and Technical Information of China (English)

    苏芬仙; 敖越; 等

    2001-01-01

    提出了引射吸收式制冷循环。它可以强化吸收,而且可以扩大吸收式制冷的应用领域。分析了引射吸收式制冷循环,提出了参数选择方法,分析了影响引射式吸收制冷循环中吸收过程的因素并与喷淋吸收过程进行了比较。%A new injecting absorption refrigeration cycle is put forward.The new refrigeration cycle can consolidate absorption of the absorption process and at the same time,the absorption refrigeration cycle can be used in more areas.The new refrigeration cycle is analyzed.A method of choosing the parameters is given.The factors are decribed which affect the absorption process.A comparison with the traditional absorption process is also made.

  8. Modeling of a Von Platen-Munters diffusion absorption refrigeration cycle

    Science.gov (United States)

    Agostini, Bruno; Agostini, Francesco; Habert, Mathieu

    2016-09-01

    This article presents a thermodynamical model of a Von-Platen diffusion absorption refrigeration cycle for power electronics applications. It is first validated by comparison with data available in the literature for the classical water-ammonia-helium cycle for commercial absorption fridges. Then new operating conditions corresponding to specific ABB applications, namely high ambient temperature and new organic fluids combinations compatible with aluminium are simulated and discussed. The target application is to cool power electronics converters in harsh environments with high ambient temperature by providing refrigeration without compressor, for passive components losses of about 500 W, with a compact and low cost solution.

  9. Performance Assessment and Active System Monitoring for Refrigeration Systems

    DEFF Research Database (Denmark)

    Green, Torben

    the controller set-point corresponds to a temperature deviation,which will eventually harm the stored goods. The energy eciency is measured by the coecient of performance, COP, which basically is the delivered cooling power divided by the consumed electrical power of the system. The reliability criteria...... of the refrigeration system has been addressed in the project. The proposed methods for improvement relies on a minimum of detailed knowledge about the refrigeration system. In addition, since a refrigeration system often operates in steady state an active system monitoring setup has been proposed, to enable...

  10. Absorption cycle commercial refrigerator using wood burning cook stove; Geladeira de absorcao acionada por fogao a lenha

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Jose Tomaz Vieira; Martins, Gilberto [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Energia

    1990-12-31

    The current utilization of wood burning cook stoves in Brazil and the socio-economical profile of their users were surveyed. A traditional heavy-mass wood-burning cook stove was studied as a thermal equipment. Simple changes in the geometry of the combustion chamber were suggested to improve the cooking efficiency. A closed two-phase thermosyphon using water as working fluid was designed, built and connected between the combustion chamber of the cook stove and a depressurized absorption refrigeration system to determine the heat flux and the temperature level. A commercial refrigerator unit, using the absorption cycle, was coupled with the wood stove through the thermosyphon. The overall results of the coupling point to successful country-side applications. (author) 12 refs., 9 figs., 4 tabs.

  11. IEA Annex 26: Advanced Supermarket Refrigeration/Heat Recovery Systems

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, VAN

    2003-05-19

    With increased concern about the impact of refrigerant leakage on global warming, a number of new supermarket refrigeration system configurations requiring significantly less refrigerant charge are being considered. In order to help promote the development of advanced systems and expand the knowledge base for energy-efficient supermarket technology, the International Energy Agency (IEA) established IEA Annex 26 (Advanced Supermarket Refrigeration/Heat Recovery Systems) under the ''IEA Implementing Agreement on Heat Pumping Technologies''. Annex 26 focuses on demonstrating and documenting the energy saving and environmental benefits of advanced systems design for food refrigeration and space heating and cooling for supermarkets. Advanced in this context means systems that use less energy, require less refrigerant and produce lower refrigerant emissions. Stated another way, the goal is to identify supermarket refrigeration and HVAC technology options that reduce the total equivalent warming impact (TEWI) of supermarkets by reducing both system energy use (increasing efficiency) and reducing total refrigerant charge. The Annex has five participating countries: Canada, Denmark, Sweden, the United Kingdom, and the United States. The working program of the Annex has involved analytical and experimental investigation of several candidate system design approaches to determine their potential to reduce refrigerant usage and energy consumption. Advanced refrigeration system types investigated include the following: distributed compressor systems--small parallel compressor racks are located in close proximity to the food display cases they serve thus significantly shortening the connecting refrigerant line lengths; secondary loop systems--one or more central chillers are used to refrigerate a secondary coolant (e.g. brine, ice slurry, or CO2) that is pumped to the food display cases on the sales floor; self-contained display cases--each food display case

  12. Model based control of refrigeration systems

    Energy Technology Data Exchange (ETDEWEB)

    Sloth Larsen, L.F.

    2005-11-15

    The subject for this Ph.D. thesis is model based control of refrigeration systems. Model based control covers a variety of different types of controls, that incorporates mathematical models. In this thesis the main subject therefore has been restricted to deal with system optimizing control. The optimizing control is divided into two layers, where the system oriented top layers deals with set-point optimizing control and the lower layer deals with dynamical optimizing control in the subsystems. The thesis has two main contributions, i.e. a novel approach for set-point optimization and a novel approach for desynchronization based on dynamical optimization. The focus in the development of the proposed set-point optimizing control has been on deriving a simple and general method, that with ease can be applied on various compositions of the same class of systems, such as refrigeration systems. The method is based on a set of parameter depended static equations describing the considered process. By adapting the parameters to the given process, predict the steady state and computing a steady state gradient of the cost function, the process can be driven continuously towards zero gradient, i.e. the optimum (if the cost function is convex). The method furthermore deals with system constrains by introducing barrier functions, hereby the best possible performance taking the given constrains in to account can be obtained, e.g. under extreme operational conditions. The proposed method has been applied on a test refrigeration system, placed at Aalborg University, for minimization of the energy consumption. Here it was proved that by using general static parameter depended system equations it was possible drive the set-points close to the optimum and thus reduce the power consumption with up to 20%. In the dynamical optimizing layer the idea is to optimize the operation of the subsystem or the groupings of subsystems, that limits the obtainable system performance. In systems

  13. Simulation studies of the behaviour of a heat pipe-assisted solar absorption refrigerator

    Energy Technology Data Exchange (ETDEWEB)

    Al-Hindi, R.R.; Khalifa, A.M.A.; Akyurt, M.

    1988-01-01

    Simulation work on an intermittent-duty, heat pipe-assisted, solar-operated aqua-ammonia absorption refrigerator is reported. The low-thermal mass collector is the integral evaporator of an acetone-copper heat pipe which delivers the collected energy isothermally to a distant generator. The shell-and-tube type generator receives the energy by vapour condensation. The condenser is air cooled. A separate R-22/steel heat-pipe system serves to cool the absorber tanks via a radiation/convection panel. Heat and mass balances are outlined on several units. The resulting equations are solved for day and night operation. It is concluded that both the initial solution (absorbent) concentration and the absorber temperature must be kept low for adequate ice production.

  14. Mechanical Engineering Refrigeration Systems for Cold Storage

    Science.gov (United States)

    1981-10-01

    LEVELK NAVFAC-DM -3.4 OCTOBER 1981 ,T O MECHANICAL ENGINEERING let REFRIGERATION SYSTEMS FOR COLD STORAGE * ,DESIGN MANUAL 3.4 APPROVED FOR PUBLIC...NUMBERNAVFAC DM3. 4- TITLE (and Subtlte) S. TYPE OF REPORT & PERIOD COVERED NAVFAC Design Manual DM-3.4 Design Criteria Mechanical Engineering Final...U S.Navy I Naval Facilities Engineering Command I r DT I, - - __ IM, *r 3i 3.4-v MECHANICAL ENGINEERING DESIGN MANUALS Chapter superseded DM Number

  15. Development and proof-testing of advanced absorption refrigeration cycle concepts

    Energy Technology Data Exchange (ETDEWEB)

    Modahl, R.J.; Hayes, F.C. (Trane Co., La Crosse, WI (United States). Applied Unitary/Refrigeration Systems Div.)

    1992-03-01

    The overall objectives of this project are to evaluate, develop, and proof-test advanced absorption refrigeration cycles that are applicable to residential and commercial heat pumps for space conditioning. The heat pump system is to be direct-fired with natural gas and is to use absorption working fluids whose properties are known. Target coefficients of performance (COPs) are 1.6 at 47{degrees}F and 1.2 at 17{degrees} in the heating mode, and 0.7 at 95{degree}F in the cooling mode, including the effect of flue losses. The project is divided into three phases. Phase I entailed the analytical evaluation of advanced cycles and included the selection of preferred concepts for further development. Phase II involves the development and testing of critical components and of a complete laboratory breadboard version of the selected system. Phase III calls for the development of a prototype unit and is contingent on the successful completion of Phase II. This report covers Phase I work on the project. In Phase 1, 24 advanced absorption cycle/fluid combinations were evaluated, and computer models were developed to predict system performance. COP, theoretical pump power, and internal heat exchange were calculated for each system, and these calculations were used as indicators of operating and installed costs in order to rank the relative promise of each system. The highest ranking systems involve the cycle concept of absorber/generator heat exchange, generator heat exchanger/absorber heat exchange, regeneration, and resorption/desorption, in combination with the NH{sub 3}/H{sub 2}O/LiBr ternary absorption fluid mixture or with the NH{sub 3}/H{sub 2}O binary solution. Based upon these conclusions, the recommendation was made to proceed to Phase II, the laboratory breadboard proof-of- concept.

  16. Experimental study of negative temperatures in lithium-bromide absorption refrigerating machines

    Science.gov (United States)

    Stepanov, K. I.; Mukhin, D. G.; Alekseenko, S. V.; Volkova, O. V.

    2015-07-01

    The authors have developed a method and presented experimental data for obtaining negative temperatures of evaporation in lithium-bromide absorption chillers driven by heat recovery. It has been found that the attainable temperature of the refrigerated medium is the value of -5 °C.

  17. Two stage sorption type cryogenic refrigerator including heat regeneration system

    Science.gov (United States)

    Jones, Jack A.; Wen, Liang-Chi; Bard, Steven

    1989-01-01

    A lower stage chemisorption refrigeration system physically and functionally coupled to an upper stage physical adsorption refrigeration system is disclosed. Waste heat generated by the lower stage cycle is regenerated to fuel the upper stage cycle thereby greatly improving the energy efficiency of a two-stage sorption refrigerator. The two stages are joined by disposing a first pressurization chamber providing a high pressure flow of a first refrigerant for the lower stage refrigeration cycle within a second pressurization chamber providing a high pressure flow of a second refrigerant for the upper stage refrigeration cycle. The first pressurization chamber is separated from the second pressurization chamber by a gas-gap thermal switch which at times is filled with a thermoconductive fluid to allow conduction of heat from the first pressurization chamber to the second pressurization chamber.

  18. Stirling cycle engine and refrigeration systems

    Science.gov (United States)

    Higa, W. H. (Inventor)

    1976-01-01

    A Stirling cycle heat engine is disclosed in which displacer motion is controlled as a function of the working fluid pressure P sub 1 and a substantially constant pressure P sub 0. The heat engine includes an auxiliary chamber at the constant pressure P sub 0. An end surface of a displacer piston is disposed in the auxiliary chamber. During the compression portion of the engine cycle when P sub 1 rises above P sub 0 the displacer forces the working fluid to pass from the cold chamber to the hot chamber of the engine. During the expansion portion of the engine cycle the heated working fluid in the hot chamber does work by pushing down on the engine's drive piston. As the working fluid pressure P sub 1 drops below P sub 0 the displacer forces most of the working fluid in the hot chamber to pass through the regenerator to the cold chamber. The engine is easily combinable with a refrigeration section to provide a refrigeration system in which the engine's single drive piston serves both the engine and the refrigeration section.

  19. Advanced Supermarket Refrigeration/ Heat Recovery Systems - Workshop Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Lundqvist, P.

    2001-06-15

    This CD ROM brings together proceedings of the Annex 26 Workshop 'Advanced Supermarket Refrigeration/ Heat Recovery Systems' held in Sweden, 2-3 October 2000. Sessions at the workshop were: Session 1: The supermarket as a system, Session 2: Analysis and modeling, Session 3: Field experiences, Session 4: Energy-efficient equipment. Annex 26 investigates candidate advanced system design approaches to determine their potential to reduce refrigerant usage and energy consumption for both refrigeration and heating/ air conditioning in supermarkets. Advanced supermarket refrigeration system concepts to be considered include, but are not limited to secondary loop systems, distributed compressors systems, and self-contained display cases.

  20. Industrial refrigeration with high efficiency absorption; Refrigeracion industrial por absorcion de alta eficiencia

    Energy Technology Data Exchange (ETDEWEB)

    Ayala Delgado, R.; Heard, C. L. [Instituto de Investigaciones Electricas, Cuernavaca, (Mexico); Pardubicki, J. [LAJ International, Mexico D. F. (Mexico)

    1995-12-31

    The absorption refrigeration ammonia-lithium nitrate offers great advantages compared with the mechanical compression refrigeration with ammonia as well as with the absorption ammonia-water refrigeration. With heat temperatures of 1000 to 1400 Celsius degrees, for instance low pressure steam the generation of cold at low temperatures (-100 to -200 Celsius degrees) is possible. The system has less components and is much less expensive than the ammonia-water equipment with a price very similar to the ammonia mechanical compression equipment. The equipment consists of five main heat exchangers and a solution pump, resulting in a high reliability of its operation, requiring a minimum maintenance. The operation cost depends directly of the cost of the energy source. In case of using residual heat the operation cost is only the maintenance cost. Nowadays the cost of the electric energy is below the production cost, which can be a short term situation. In time terms of the comparable useful life time of an absorption refrigeration system (in excess of 20 years), it is reasonable to think that the operation costs will be less than the operation costs of an equipment with mechanical compression. To this day it is available a demonstration unit to exhibit the system in industrial plants with different energy sources. [Espanol] La refrigeracion por absorcion amoniaco/nitrato de litio ofrece grandes ventajas comparada tanto con la refrigeracion por compresion mecanica con amoniaco como con la refrigeracion por absorcion amoniaco/agua. Este sistema es mas eficiente y sencillo que el sistema de amoniaco/agua. Con calor de temperatura (100 a 140 grados centigrados por ejemplo vapor de baja presion, se permite la generacion de frio a temperaturas bajas (-10 a -20 grados centigrados). El sistema tiene menos componentes y es mucho mas barato que equipo de amoniaco/agua con un precio muy similar a sistemas por compresion mecanica de amoniaco. El sistema consiste en cinco

  1. Performance improvement clarification for refrigeration system using active system monitoring

    DEFF Research Database (Denmark)

    Green, Torben; Niemann, Hans Henrik; Izadi-Zamanabadi, Roozbeh

    2011-01-01

    This paper addresses the problem of determining whether a refrigeration plant has the possibility of delivering a better performance of the operation. The controllers are wellknown but detailed knowledge about the underlying dynamics of the refrigeration plant is not available. Thus, the question...... is if it is possible to achieve a better performance by changing the controller parameter. An approach to active system monitoring, based on active fault diagnosis techniques, is employed in order to evaluate changes in the system performance under operation....

  2. De-synchronization of the Distributed Refrigeration System

    DEFF Research Database (Denmark)

    Chen, Liang; Wisniewski, Rafal

    2010-01-01

    on the compressors and increased energy consumption. The paper focuses on the synchronization analysis and de-synchronization control. The supermarket refrigeration system is modeled as a piecewise-affine switched system. The system behavior is decomposed such that synchronization analysis can be completed by using...... performance and can deal with the large scale refrigeration system with different system parameters in the display cases....

  3. 扩散吸收式制冷系统中板式换热器综合传热性能分析%Heat Transfer Performances of Plate Heat Exchangers Used in Diffusion-Absorption Refrigeration System

    Institute of Scientific and Technical Information of China (English)

    王寒栋

    2012-01-01

    在一种太阳能驱动、采用喷雾吸收器并以板式换热器作为主要换热部件的LiNO3-NH3-He三工质扩散吸收式制冷系统中,根据试验测得的运行参数,以溶液的p-t-x西方程及物性方程、传热基础理论等为依据,提出了计算溶液换热器中溶液流量的方法,并利用综合传热系数k、传热单元数N_TU与换热器效率s研究了板式换热器作为LiN03-NH3-He扩散吸收式制冷系统发生器、冷凝器、溶液热交换器、溶液冷却器时的换热性能.试验与分析表明,板式换热器的换热面积及其内部流道中的流量(流速)对其综合传热性能具有较大影响;在介质流量一定时,板式换热器不宜考虑过大的面积预留量;板式溶液换热器内部流道宜采用多流程布置形式以强化传热、提高换热效率.%A LiNO3-NH3-He diffusion-absorption refrigeration system driven by solar energy is introduced, in which a spray absorber is used to enhance the heat and mass transfer, and plate heat exchangers (PHEs) used as generator, condenser, solution heat exchanger (SHE) and solution cooler, respectively. Besides, solution flow rates in the system are evaluated based on p-t-x and physical property equations of LiNO3-NH3 solution, principles of heat transfer, and parameters such as pressure, temperatures and flow rates. Heat transfer performances are also investigated according to the overall heat transfer coefficient k, number of heat transfer units NTU and heat exchanger efficiency ε. Experiments and analysis show that, in LiNO3-NH3-He diffusion-absorption refrigeration system, heat transfer area and solution flow rates of PHEs affect the overall heat transfer performance of the PHEs. Therefore, extra size on PHE is not recommended if the solution flow rate is kept constant, and inner passageways of PHEs should adopt multi-pass to enhance heat transfer.

  4. Commercial Refrigeration: Heat Transfer Optimization and Energy Reduction, Measurement and Verification of a Liquid Refrigerant Pump System Retrofit

    Energy Technology Data Exchange (ETDEWEB)

    Gaul, Chris [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sheppy, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-03-22

    This study describes the test results of a Refrigerant Pump System integrated into a commercial supermarket direct expansion (DX) vapor compression refrigeration system. The Liquid Refrigerant Pump System retrofit (patent-pending; application number 13/964,198) was introduced to NREL in August 2014 by CTA Architects Engineers.

  5. Performance Analysis of Multipurpose Refrigeration System (MRS on Fishing Vessel

    Directory of Open Access Journals (Sweden)

    Ust Y.

    2016-04-01

    Full Text Available The use of efficient refrigerator/freezers helps considerably to reduce the amount of the emitted greenhouse gas. A two-circuit refrigerator-freezer cycle (RF reveals a higher energy saving potential than a conventional cycle with a single loop of serial evaporators, owing to pressure drop in each evaporator during refrigeration operation and low compression ratio. Therefore, several industrial applications and fish storage systems have been utilized by using multipurpose refrigeration cycle. That is why a theoretical performance analysis based on the exergetic performance coefficient, coefficient of performance (COP, exergy efficiency and exergy destruction ratio criteria, has been carried out for a multipurpose refrigeration system by using different refrigerants in serial and parallel operation conditions. The exergetic performance coefficient criterion is defined as the ratio of exergy output to the total exergy destruction rate (or loss rate of availability. According to the results of the study, the refrigerant R32 shows the best performance in terms of exergetic performance coefficient, COP, exergy efficiency, and exergy destruction ratio from among the other refrigerants (R1234yf, R1234ze, R404A, R407C, R410A, R143A and R502. The effects of the condenser, freezer-evaporator and refrigerator-evaporator temperatures on the exergetic performance coefficient, COP, exergy efficiency and exergy destruction ratios have been fully analyzed for the refrigerant R32.

  6. Model Based Control of Refrigeration Systems

    DEFF Research Database (Denmark)

    Larsen, Lars Finn Sloth

    for automation of these procedures, that is to incorporate some "intelligence" in the control system, this project was started up. The main emphasis of this work has been on model based methods for system optimizing control in supermarket refrigeration systems. The idea of implementing a system optimizing...... optimizing the steady state operation "set-point optimizing control" and a part optimizing dynamic behaviour of the system "dynamical optimizing control". A novel approach for set-point optimization will be presented. The general idea is to use a prediction of the steady state, for computation of the cost...... that the crosscouplings are disregarded. Though these cross couplings are relatively weak, it turns out that they pose a major problem when hysteresis controllers are used in the local loops. It can namely cause synchronization of the distributed hysteresis controllers, thus accumulating the effects of the cross...

  7. Thermoeconomic model of a commercial transcritical booster refrigeration system

    DEFF Research Database (Denmark)

    Ommen, Torben Schmidt; Elmegaard, Brian

    2011-01-01

    For cooling applications in supermarkets, booster refrigeration systems operating in both transcritical and subcritical conditions are increasingly used. A thermodynamic model of a transcritical booster refrigeration plant is tailored to match the new generation of commercial refrigeration plants...... of exergy for cooling. Second law analysis is needed to illustrate the characteristics of the plant at different load rates, according to the alternating load profile and corresponding to outdoor conditions. With the detailed model, different uses of the analysis are possible, including thermoeconomic...

  8. NLP modeling for the optimization of LiBr-H2O absorption refrigeration systems with exergy loss rate, heat transfer area, and cost as single objective functions

    DEFF Research Database (Denmark)

    Mussati, Sergio F.; Gernaey, Krist; Morosuk, Tatiana

    2016-01-01

    exergy loss rate, the total heat transfer area, and the total annual cost of the system. It was found that the optimal solution obtained by minimization of the total exergy loss rate provides “theoretical” upper bounds not only for the total heat transfer area of the system but also for each process unit...... and all stream temperatures, while the optimal solution obtained by minimization of the total heat transfer area provides the lower bounds for these model variables, to solve a cost optimization problem. The minimization of the total exergy loss rate by varying parametrically the available total heat...... and quantitatively with increasing available total heat transfer area. These optimization results allowed to find a “practical” value of the total heat transfer area, i.e. no benefits can be obtained by increasing the available total heat transfer area above this value since the minimal total exergy loss value...

  9. Investigation of novel thermoelectric refrigeration systems

    OpenAIRE

    Ma, Xiaoli

    2004-01-01

    Concern over global warming and depletion of the ozone layer has stimulated research to develop cooling methods that do not employ environmentally damaging working fluids such as CFCs and HCFCs. Two methods that have been considered are absorption and thermoelectric `Peltier' cooling systems. Absorption systems, using H20/LiBr have the advantage of being able to use low-grade waste heat. However, the large volume, high capital cost and low performance of these systems have inhibited their wid...

  10. Optimal Cooling Load and COP Relationship of a Four-Heat-Reservoir Endoreversible Absorption Refrigeration Cycle

    Directory of Open Access Journals (Sweden)

    Chih Wu

    2004-06-01

    Full Text Available Abstract: On the basis of a four-heat-reservoir endoreversible absorption refrigeration cycle model, another linear heat transfer law [i.e., the heat-flux] is adopted, the fundamental optimal relation between the coefficient of performance (COP and the cooling load, as well as the maximum cooling load and the corresponding COP of the cycle coupled to constant-temperature heat reservoirs are derived by using finite-time thermodynamics or thermodynamic optimization. The optimal distribution of the heat-transfer surface areas is also obtained. Moreover, the effects of the cycle parameters on the COP and the cooling load of the cycle are studied by detailed numerical examples. The results obtained herein are of importance to the optimal design and performance improvement of an absorption refrigeration cycle.

  11. 46 CFR 128.410 - Ship's service refrigeration systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Ship's service refrigeration systems. 128.410 Section 128.410 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS... service refrigeration systems. No self-contained unit either for air-conditioning or for...

  12. Control Methods Utilizing Energy Optimizing Schemes in Refrigeration Systems

    DEFF Research Database (Denmark)

    Larsen, L.S; Thybo, C.; Stoustrup, Jakob;

    2003-01-01

    The potential energy savings in refrigeration systems using energy optimal control has been proved to be substantial. This however requires an intelligent control that drives the refrigeration systems towards the energy optimal state. This paper proposes an approach for a control, which drives...

  13. Active Sensor Configuration Validation for Refrigeration Systems

    DEFF Research Database (Denmark)

    Hovgaard, Tobias Gybel; Blanke, Mogens; Niemann, Hans Henrik

    2010-01-01

    Major faults in the commissioning phase of refrigeration systems are caused by defects related to sensors. With a number of similar sensors available that do not differ by type but only by spatial location in the plant, interchange of sensors is a common defect. With sensors being used quite...... differently by the control system, fault-finding is difficult in practice and defects are regularly causing commissioning delays at considerable expense. Validation and handling of faults in the sensor configuration are therefore essential to cut costs during commissioning. With passive fault......-diagnosis methods falling short on this problem, this paper suggests an active diagnosis procedure to isolate sensor faults at the commissioning stage, before normal operation has started. Using statistical methods, residuals are evaluated versus multiple hypothesis models in a minimization process to uniquely...

  14. Supermarket Refrigeration System - Benchmark for Hybrid System Control

    DEFF Research Database (Denmark)

    Sloth, Lars Finn; Izadi-Zamanabadi, Roozbeh; Wisniewski, Rafal

    2007-01-01

    This paper presents a supermarket refrigeration system as a benchmark for development of new ideas and a comparison of methods for hybrid systems' modeling and control. The benchmark features switch dynamics and discrete valued input making it a hybrid system, furthermore the outputs are subjected...

  15. Mixed refrigerant composition shift due to throttle valves opening in auto cascade refrigeration system

    Institute of Scientific and Technical Information of China (English)

    Xiongwen Xu; Jinping Liu; Le Cao

    2015-01-01

    Auto cascade refrigeration (ACR) cycle with phase separators is widely used in the cryogenic system. The compo-sition of mixed refrigerant has a great effect on the performance of the system. Based on the assumption of infinite volume of phase separator, ACR system with one phase separator is simulated in this paper. The variation of refrigerant composition under different valves opening is obtained. A related experimental system is set up to verify the variation. The result shows that when the valve opening connected to the evaporator increases or the valve opening under the phase separator decreases, the low-boiling component concentration of the working mixture passing through the compressor and condenser increases, while the high-boiling component concentra-tion decreases. Furthermore, the variations of condensation pressure and evaporation pressure under different valves opening are also observed. This paper is helpful to deepen the understanding of ACR system.

  16. The Refrigeration System; Appliance Repair--Advanced: 9027.01.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    This course outline provides students with an understanding of the observation of basic refrigeration system components, the techniques used in working with copper tubing, and practice demonstrations to show what they have learned. Course content includes specific block objectives, orientation, refrigeration components (evaporator, compressor,…

  17. Modeling Supermarket Refrigeration Systems with EnergyPlus

    Energy Technology Data Exchange (ETDEWEB)

    Stovall, Therese K [ORNL; Baxter, Van D [ORNL

    2010-01-01

    Supermarket refrigeration capabilities were first added to EnergyPlus in 2004. At that time, it was possible to model a direct expansion (DX) rack system with multiple refrigerated cases. The basic simulation software handles all the building energy uses, typically on a 5 to 10 minute time step throughout the period of interest. The original refrigeration module included the ability to model the sensible and latent interactions between the refrigerated cases and the building HVAC system, along with some basic heat recovery capabilities. Over the last few years, the refrigeration module has been expanded to handle more complex systems, such as secondary loops, shared condensers, cascade condensers, subcoolers, and walk-in coolers exchanging energy with multiple conditioned zones.

  18. Energy Efficiency and Environmental Impact Analyses of Supermarket Refrigeration Systems

    Energy Technology Data Exchange (ETDEWEB)

    Fricke, Brian A [ORNL; Bansal, Pradeep [ORNL; Zha, Shitong [Hillphoenix

    2013-01-01

    This paper presents energy and life cycle climate performance (LCCP) analyses of a variety of supermarket refrigeration systems to identify designs that exhibit low environmental impact and high energy efficiency. EnergyPlus was used to model refrigeration systems in a variety of climate zones across the United States. The refrigeration systems that were modeled include the traditional multiplex DX system, cascade systems with secondary loops and the transcritical CO2 system. Furthermore, a variety of refrigerants were investigated, including R-32, R-134a, R-404A, R-1234yf, R-717, and R-744. LCCP analysis was used to determine the direct and indirect carbon dioxide emissions resulting from the operation of the various refrigeration systems over their lifetimes. Our analysis revealed that high-efficiency supermarket refrigeration systems may result in up to 44% less energy consumption and 78% reduced carbon dioxide emissions compared to the baseline multiplex DX system. This is an encouraging result for legislators, policy makers and supermarket owners to select low emission, high-efficiency commercial refrigeration system designs for future retrofit and new projects.

  19. Energy analysis of a supermarket refrigeration system

    DEFF Research Database (Denmark)

    Jensen, Jakob Munch; Jakobsen, Arne; Rasmussen, Bjarne D.;

    1999-01-01

    measurements is to make a more detailed investigation of the energy efficiency possible.According to this investigation, a considerable part of the energy consumption is used for anti sweat heaters in refrigerated cabinets.At present, the energy test has only been carried out on five different refrigeration...

  20. High-efficiency gas heat pump air-conditioner equipped with absorption refrigerator

    Science.gov (United States)

    Imai, Yosuke; Ohashi, Toshinori; Okamoto, Hiroaki; Hihara, Eiji; Kawakami, Ryuichiro

    On conventional gas heat pump(GHP), waste heat from gas engine that uses as driving source is emitted into outside. So from the standpoint of efficient use of waste heat, it is assumed that waste heat from gas engine is used as driving source of absorption chiller, and high temperature condensate refrigerant in GHP is subcooled to middle temperature by cold source from absorption cycle, and as a result, GHP makes more efficiency. However, in equipping GHP with absorption cycle, downsizing and high-efficiency of absorption cycle is required. In this study, air-cooled subcooled adiabatic absorber is focused and physical phenomenon in it is analyzed, and finally one perception of the optimized designing is shown.

  1. Trends and perspectives for supermarket refrigeration systems; Trends und Perspektiven fuer Supermarkt-Kaelteanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Kauffeld, M. [Hochschule Karlsruhe - Technik und Wirtschaft (Germany). Inst. fuer Kaelte-, Klima- und Umwelttechnik

    2008-04-15

    This paper describes the latest trends and perspectives in supermarket refrigeration. Focus is on improving energy efficiency, reducing refrigerant charge and using natural refrigerants. Several alternative systems such as indirect, distributed, cascade and two-stage are described. (orig.)

  2. Modeling and Control of a Double-effect Absorption Refrigerating Machine

    Science.gov (United States)

    Hihara, Eiji; Yamamoto, Yuuji; Saito, Takamoto; Nagaoka, Yoshikazu; Nishiyama, Noriyuki

    Because the heat capacity of absorption refrigerating machines is large compared with vapor compression refrigerating machines, the dynamic characteristics at the change in cooling load conditions are problems to be improved. The control method of energy input and of weak solution flow rate following cooling load variations was investigated. As the changes in cooling load and cooling capacity are moderate, the optimal operation conditions corresponding to the cooling load can be estimated with steady state characteristics. If the relation between the cooling load and the optimal operation conditions is well known, a feed forward control can be employed. In this report a new control algorithm, which is called MOL (Multi-variable Open Loop) control, is proposed. Comparing the MOL control with the conventional chilled water outlet temperature proportional control, the MOL control enables the smooth changes in cooling capacity and the reduction in fuel consumption.

  3. Performance of Generator of Absorption Refrigerating Machine Powered by Hot Water

    Science.gov (United States)

    Kunugi, Yoshifumi; Usui, Sanpei; Ouchi, Tomihisa; Fukuda, Tamio

    For 70 kW generator of absorption refrigerating machine powered by the hot water, lifted liquid rate of the bubble lift pump has a maximum value at some vapor flow rate of refrigerant and hot water inlet temperature. This is in agreement with results of small size bubble lift pump. Maximum lifted liquid rate G0 is correlated by the equation G0 = 5, 000σ1.5, where σ is the degree of submergence. In this case, diameter of pump tube was 41.6mm, and length of it were 1,300 and 1,500mm. The range of hot water inlet temperature was 78 - 100°C. Multitube heat flux of first generator is about two times that of second generator at the same superheat.

  4. Small quantum absorption refrigerator in the transient regime: Time scales, enhanced cooling, and entanglement.

    Science.gov (United States)

    Brask, Jonatan Bohr; Brunner, Nicolas

    2015-12-01

    A small quantum absorption refrigerator, consisting of three qubits, is discussed in the transient regime. We discuss time scales for coherent dynamics, damping, and approach to the steady state, and we study cooling and entanglement. We observe that cooling can be enhanced in the transient regime, in the sense that lower temperatures can be achieved compared to the steady-state regime. This is a consequence of coherent dynamics but can occur even when this dynamics is strongly damped by the dissipative thermal environment, and we note that precise control over couplings or timing is not needed to achieve enhanced cooling. We also show that the amount of entanglement present in the refrigerator can be much larger in the transient regime compared to the steady state. These results are of relevance to future implementations of quantum thermal machines.

  5. Performance Monitoring in Supermarket Refrigeration Systems - Synchronisation of Refrigerated Display Cases

    DEFF Research Database (Denmark)

    Chen, Liang; Green, Torben; Sloth Larsen, Lars Finn

    2009-01-01

    . The conceptual validation of these methods has been by far illustrated through the use of typically simple academic examples. In this paper the hybrid systems is treated as a single directed topological space, and presents a refrigeration system as a benchmark that should be useful as a platform...

  6. Control Methods Utilizing Energy Optimizing Schemes in Refrigeration Systems

    DEFF Research Database (Denmark)

    Larsen, L.S; Thybo, C.; Stoustrup, Jakob;

    2003-01-01

    The potential energy savings in refrigeration systems using energy optimal control has been proved to be substantial. This however requires an intelligent control that drives the refrigeration systems towards the energy optimal state. This paper proposes an approach for a control, which drives...... the condenser pressure towards an optimal state. The objective of this is to present a feasible method that can be used for energy optimizing control. A simulation model of a simple refrigeration system will be used as basis for testing the control method....

  7. Development of 18 K helium refrigeration system for CERN

    CERN Document Server

    CERN. Geneva

    2004-01-01

    The Conseil Europeen pour Ia Recherche Nucleaire (CERN) placed an order for a 1.8 K helium refrigeration system with IHI for the Large Hadron Collider project in 1999. IHI formed a consortium with Linde Kryotechnik AG (Switzerland), which has long experience with helium refrigeration systems. IHI designed and manufactured cold compressors based on leading technologies and expertise for turbo machinery. The cold compressor has the highest efficiency in the world. This paper describes the 1.8 K helium refrigeration system and performance test results at CERN. (5 refs).

  8. Experimental study on neon refrigeration system using commercial helium compressor

    Science.gov (United States)

    Ko, Junseok; Kim, Hyobong; Hong, Yong-Ju; Yeom, Hankil; Koh, Deuk-Yong; Park, Seong-Je

    2012-06-01

    In this study, we developed neon refrigeration system using commercial helium compressor which was originally designed for GM cryocooler. We performed this research as precedent study before developing neon refrigeration system for small-scale hydrogen liquefaction system. The developed system is based on precooled Linde-Hampson system with liquid nitrogen as precoolant. Design parameters of heat exchangers are determined from thermodynamic cycle analysis with operating pressure of 2 MPa and 0.4 MPa. Heat exchangers have concentric-tube heat exchanger configuration and orifice is used as Joule- Thomson expansion device. In experiments, pressure, temperature, mass flow rate and compressor input power are measured as charging pressure. With experimental results, the characteristics of heat exchanger, Joule-Thomson expansion and refrigeration effect are discussed. The developed neon refrigeration system shows the lowest temperature of 43.9 K.

  9. 一个新的吸收-喷射复合制冷循环%A NOVEL COMBINED EJECTOR-ABSORPTION REFRIGERATION CYCLE

    Institute of Scientific and Technical Information of China (English)

    洪大良; 唐黎明; 邹云霞; 何一坚; 陈光明

    2011-01-01

    提出了一个新的吸收-喷射复合制冷循环.在新循环中,部分冷凝器出口的饱和液态制冷剂被冷剂泵加压到制冷剂在发生温度下对应的饱和压力,这股高压制冷剂液体在一个沸腾器里被加热成饱和高压蒸气后将预热器出口的过热制冷剂蒸气引射到冷凝压力.由于在新循环中发生压力可以比冷凝压力低,因此该系统可以利用较低品位的热量制取低温下的冷量.研究结果表明:新循环可以利用比传统两级吸收式制冷循环温度更低的热源,制取同一温度下的冷量.此外,在蒸发温度或发生温度较低时,新循环的COP比单效循环高得多;当发生温度或蒸发温度较高时,新循环和传统单效循环的COP相同.%To make refrigeration at low temperature with low-grade heat source, a novel combined ejector-absorption refrigeration cycle was proposed in this paper. In the new cycle, part of saturated liquid refrigerant from the condenser was pumped to saturated pressure of the refrigerant at generation temperature. This stream was heated into saturated vapor in a boiler and injected the superheating refrigerant vapor from a preheater to condenser pressure. Since the generation pressure is lower than condenser pressure in the new cycle, the system can make refrigeration at low temperature with low-grade heat source. The research results show that the generation temperature of the new cycle is even lower than that of the conventional two-stage absorption refrigeration cycle to make refrigeration at the same low temperature. In addition, the COP of the new cycle is much higher than that of single-effect cycle at the low refrigeration temperature and generation temperature. If the refrigeration temperature or the temperature of heat source is high enough, the COP of the new cycle is the same as that of the conventional single-effect cycle.

  10. Power Consumption in Refrigeration Systems - Modeling for Optimization

    DEFF Research Database (Denmark)

    Hovgaard, Tobias Gybel; Larsen, Lars F. S.; Skovrup, Morten Juel

    2011-01-01

    there is a possibility for optimizing the power consumption by utilizing load shifting strategies. This paper describes the dynamics and the modeling of a vapor compression refrigeration system needed for sufficiently realistic estimation of the power consumption and its minimization. This leads to a non-convex function...... with possibly multiple extrema. Such a function can not directly be optimized by standard methods and a qualitative analysis of the system’s constraints is presented. The description of power consumption contains nonlinear terms which are approximated by linear functions in the control variables and the error......Refrigeration systems consume a substantial amount of energy. Taking for instance supermarket refrigeration systems as an example they can account for up to 50−80% of the total energy consumption in the supermarket. Due to the thermal capacity made up by the refrigerated goods in the system...

  11. An overview of adsorptive processes in refrigeration systems

    Directory of Open Access Journals (Sweden)

    Wolak Eliza

    2016-01-01

    Full Text Available Economic reasons and quest for new solutions based on recovering the energy have provoked an increase of interest in the adsorption technology in the refrigeration industry. The confirmation can be the fact that number of published research is on rise. Adsorption appliances may turn out to be an alternative to compression-type coolers. They use ecological chemical agents instead of substances which are aggressive and harmful to the environment. For regeneration of adsorptive refrigeration systems one can use cheap energy in a form of: industrial waste heat, energy of solar radiation and cheap electric power. The paper presents principles of operation as well as advantages and disadvantages of adsorptive refrigeration systems. Basing on literature the most frequently used adsorbent – adsorbate systems – which are employed in refrigeration industry – have been characterized. A review of construction solutions of systems on both laboratory and industrial scale has been made.

  12. Modelling the absorption refrigeration cycle using partially miscible working fluids by group contribution methods

    Science.gov (United States)

    Larkeche, O.; Meniai, A.-H.; Cachot, T.

    2012-06-01

    The present study concerns the cycle performance modelling of a particular configuration of an absorption refrigeration machine based on phase separation as well as development of a strategy for computer aided design of absorbents. The model uses predictive methods based on the group contribution concept for the computation of the thermodynamic phase equilibria involved such as liquid-liquid and vapour-liquid as well as enthalpy-concentration diagrams. The proposed absorbents computer-aided design strategy is based on the exploration of a number of structural group combinations obtained from a selected set of functional groups, according to the chemistry laws. The model was tested on four different absorbent-refrigerant pairs reported in the literature, namely (benzyl ethyl amine-glycerol), (water-hexanoic acid), (water-2-hexanone) and (water-ethyl propionate) as well as on pairs where the absorbent compound is generated by the proposed absorbent design strategy and the refrigerant is water. The results show that quite good values of the coefficient of performance (COP) can be obtained, indicating that this cycle configuration is promising and energetically efficient, mainly due to hardware savings, i.e. absence of condenser. However, other working fluid combinations have to be tested using the proposed model.

  13. Advanced Supermarket Refrigeration / Heat Recovery Systems. Annex 26

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    This CD-ROM contains the proceedings (16 papers) of a workshop (held in Stockholm, Sweden, 2-3 October 2000) on Advanced Supermarket Refrigeration/ Heat Recovery Systems. Sessions at the workshop discussed: The supermarket as a system, Analysis and modelling, Field experiences and Energy-efficient equipment. The 16 papers presented at the workshop provide a useful information source for all involved in supermarket refrigeration.

  14. Dynamic simulator of helium refrigeration system; Hemiumu reitoki doteki shumyureta

    Energy Technology Data Exchange (ETDEWEB)

    Yoshimura, H.; Mori, M.; Miyake, A. [Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo (Japan)

    1999-06-07

    The helium refrigerator has various operation modes. Therefore, it is insufficient for developing the refrigerating machine only by the static simulator, which simulates only one design point. It is necessary to carry out the design, which can deal with the change of the operation mode and construction of the appropriate controllability of the system. The construction of the dynamic simulator is required in the reason. This time, the heat exchanger in the helium refrigerator cool-down was unsteadily analyzed, and it was compared with the measured value. (NEDO)

  15. Automatic control study of the icing research tunnel refrigeration system

    Science.gov (United States)

    Kieffer, Arthur W.; Soeder, Ronald H.

    1991-01-01

    The Icing Research Tunnel (IRT) at the NASA Lewis Research Center is a subsonic, closed-return atmospheric tunnel. The tunnel includes a heat exchanger and a refrigeration plant to achieve the desired air temperature and a spray system to generate the type of icing conditions that would be encountered by aircraft. At the present time, the tunnel air temperature is controlled by manual adjustment of freon refrigerant flow control valves. An upgrade of this facility calls for these control valves to be adjusted by an automatic controller. The digital computer simulation of the IRT refrigeration plant and the automatic controller that was used in the simulation are discussed.

  16. Heat driven refrigeration cycle at low temperatures

    Institute of Scientific and Technical Information of China (English)

    HE Yijian; HONG Ronghua; CHEN Guangming

    2005-01-01

    Absorption refrigeration cycle can be driven by low-grade thermal energy, such as solar energy, geothermal energy and waste heat. It is beneficial to save energy and protect environment. However, the applications of traditional absorption refrigeration cycle are greatly restricted because they cannot achieve low refrigeration temperature. A new absorption refrigeration cycle is investigated in this paper, which is driven by low-grade energy and can get deep low refrigeration temperature. The mixture refrigerant R23+R134a and an absorbent DMF are used as its working fluid. The theoretical results indicate that the new cycle can achieve -62℃ refrigeration temperature when the generation temperature is only 160℃. This refrigeration temperature is much lower than that obtained by traditional absorption refrigeration cycle. Refrigeration temperature of -47.3℃ has been successfully achieved by experiment for this new cycle at the generation temperature of 157℃, which is the lowest temperature obtained by absorption refrigeration system reported in the literature up to now. The theoretical and experimental results prove that new cycle can achieve rather low refrigeration temperature.

  17. Effect of evaporator temperature on vapor compression refrigeration system

    Directory of Open Access Journals (Sweden)

    Abdullah A.A.A. Al-Rashed

    2011-12-01

    Full Text Available This paper presents a comparable evaluation of R600a (isobutane, R290 (propane, R134a, R22, for R410A, and R32 an optimized finned-tube evaporator, and analyzes the evaporator effect on the system coefficient of performance (COP. Results concerning the response of a refrigeration system simulation software to an increase in the amount of oil flowing with the refrigerant are presented. It is shown that there is optima of the apparent overheat value, for which either the exchanged heat or the refrigeration coefficient of performance (COP is maximized: consequently, it is not possible to optimize both the refrigeration COP and the evaporator effect. The obtained evaporator optimization results were incorporated in a conventional analysis of the vapor compression system. For a theoretical cycle analysis without accounting for evaporator effects, the COP spread for the studied refrigerants was as high as 11.7%. For cycle simulations including evaporator effects, the COP of R290 was better than that of R22 by up to 3.5%, while the remaining refrigerants performed approximately within a 2% COP band of the R22 baseline for the two condensing temperatures considered.

  18. Next Generation Refrigeration Lubricants for Low Global Warming Potential/Low Ozone Depleting Refrigeration and Air Conditioning Systems

    Energy Technology Data Exchange (ETDEWEB)

    Hessell, Edward

    2013-12-31

    The goal of this project is to develop and test new synthetic lubricants that possess high compatibility with new low ozone depleting (LOD) and low global warming potential (LGWP) refrigerants and offer improved lubricity and wear protection over current lubricant technologies. The improved compatibility of the lubricants with the refrigerants, along with improved lubricating properties, will resulted in lower energy consumption and longer service life of the refrigeration systems used in residential, commercial and industrial heating, ventilating and air-conditioning (HVAC) and refrigeration equipment.

  19. Aspects on modeled and the design of a system of refrigeration by absorption attended with solar energy; Aspectos sobre el modelado y diseno de un sistema de refrigeracion por absorcion asistido con energia solar

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Cascales, J. R.; Vera Garcia, F.; Cano Izquierdo, J. M.; Delgado Marin, J. P.; Martinez Sanchez, R.

    2008-07-01

    In this paper, we study the global modelling of an absorption system working with Br Li-H{sub 2}O. It satisfies the air-conditioning necessities of a classroom in an educational centre in Puerto Lumbreras. Murcia. This system utilises a set of solar collector to satisfy the thermal necessities of the vapour generator in the absorption system. For the dynamical simulation of the system we have used the TRNSYS software. The air-conditioned place has been modelled by using a TRNSYS module called PREBID. In this work, special attention is paid to the absorption equipment model developed by using neural networks which has been implemented in TRNSYS. The paper is closed drawing some conclusions. (Author)

  20. An Evaluation of the Environmental Impact of Different Commercial Supermarket Refrigeration Systems Using Low Global Warming Potential Refrigerants

    Energy Technology Data Exchange (ETDEWEB)

    Beshr, Mohamed [University of Maryland, College Park; Aute, Vikrant [University of Maryland, College Park; Abdelaziz, Omar [ORNL; Fricke, Brian A [ORNL; Radermacher, Reinhard [University of Maryland, College Park

    2014-01-01

    Commercial refrigeration systems consumed 1.21 Quads of primary energy in 2010 and are known to be a major source for refrigerant charge leakage into the environment. Thus, it is important to study the environmental impact of commercial supermarket refrigeration systems and improve their design to minimize any adverse impacts. The system s Life Cycle Climate Performance (LCCP) was presented as a comprehensive metric with the aim of calculating the equivalent mass of carbon dioxide released into the atmosphere throughout its lifetime, from construction to operation and destruction. In this paper, an open source tool for the evaluation of the LCCP of different air-conditioning and refrigeration systems is presented and used to compare the environmental impact of a typical multiplex direct expansion (DX) supermarket refrigeration systems based on three different refrigerants as follows: two hydrofluorocarbon (HFC) refrigerants (R-404A, and R-407F), and a low global warming potential (GWP) refrigerant (N-40). The comparison is performed in 8 US cities representing different climates. The hourly energy consumption of the refrigeration system, required for the calculation of the indirect emissions, is calculated using a widely used building energy modeling tool (EnergyPlus). A sensitivity analysis is performed to determine the impact of system charge and power plant emission factor on the LCCP results. Finally, we performed an uncertainty analysis to determine the uncertainty in total emissions for both R-404A and N-40 operated systems. We found that using low GWP refrigerants causes a considerable drop in the impact of uncertainty in the inputs related to direct emissions on the uncertainty of the total emissions of the system.

  1. Molecular absorption cryogenic cooler for liquid hydrogen propulsion systems

    Science.gov (United States)

    Klein, G. A.; Jones, J. A.

    1982-01-01

    A light weight, long life molecular absorption cryogenic cooler (MACC) system is described which can use low temperature waste heat to provide cooling for liquid hydrogen propellant tanks for interplanetary spacecraft. Detailed tradeoff studies were made to evaluate the refrigeration system component interactions in order to minimize the mass of the spacecraft cooler system. Based on this analysis a refrigerator system mass of 31 kg is required to provide the .48 watts of cooling required by a 2.3 meter diameter liquid hydrogen tank.

  2. Development and proof-testing of advanced absorption refrigeration cycle concepts. Report on Phases 1 and 1A

    Energy Technology Data Exchange (ETDEWEB)

    Modahl, R.J.; Hayes, F.C. [Trane Co., La Crosse, WI (United States). Applied Unitary/Refrigeration Systems Div.

    1992-03-01

    The overall objectives of this project are to evaluate, develop, and proof-test advanced absorption refrigeration cycles that are applicable to residential and commercial heat pumps for space conditioning. The heat pump system is to be direct-fired with natural gas and is to use absorption working fluids whose properties are known. Target coefficients of performance (COPs) are 1.6 at 47{degrees}F and 1.2 at 17{degrees} in the heating mode, and 0.7 at 95{degree}F in the cooling mode, including the effect of flue losses. The project is divided into three phases. Phase I entailed the analytical evaluation of advanced cycles and included the selection of preferred concepts for further development. Phase II involves the development and testing of critical components and of a complete laboratory breadboard version of the selected system. Phase III calls for the development of a prototype unit and is contingent on the successful completion of Phase II. This report covers Phase I work on the project. In Phase 1, 24 advanced absorption cycle/fluid combinations were evaluated, and computer models were developed to predict system performance. COP, theoretical pump power, and internal heat exchange were calculated for each system, and these calculations were used as indicators of operating and installed costs in order to rank the relative promise of each system. The highest ranking systems involve the cycle concept of absorber/generator heat exchange, generator heat exchanger/absorber heat exchange, regeneration, and resorption/desorption, in combination with the NH{sub 3}/H{sub 2}O/LiBr ternary absorption fluid mixture or with the NH{sub 3}/H{sub 2}O binary solution. Based upon these conclusions, the recommendation was made to proceed to Phase II, the laboratory breadboard proof-of- concept.

  3. Solar ejector refrigerant system in China’s residential buildings

    Directory of Open Access Journals (Sweden)

    Zheng Hui-Fan

    2014-01-01

    Full Text Available A simulation program describing the performance of solar ejector refrigerant system for air conditioning of China’s residential buildings was established. Hourly performance of the system under different operate conditions, the collector efficiency, coefficient of performance, cooling capacity and cooling load were analyzed. It is found that the collector efficiency and the overall coefficient of performance increase first and then decline, and it can be concluded that the application of solar ejector refrigerant system will have a better developmental prospect in China’s residential buildings.

  4. Advanced Supermarket Refrigeration/Heat Recovery Systems. Country Report, Denmark

    DEFF Research Database (Denmark)

    Knudsen, Hans-Jørgen Høgaard; Christensen, K. G.

    Annex 26 is the first international project under the IEA Heat Pump Programme that links refrigeration and heat pump technology. Recovering heat from advanced supermarket refrigeration systems for space and water heating seems obvious and is beneficial for owners and operators. Because the great...... conclusions as far energy conservation and TEWI reduction is concerned. The conclusion justify that advanced supermarket systems with heat recovery should receive great attention and support. And there is still further research needed in several areas. The Annex also included a thorough system analyses...

  5. Installation of a small central thermoelectric using biomass and cogeneration with absorption refrigeration system: alternative for small rural isolated communities; Instalacao de uma pequena central termeletrica a biomassa e cogeracao com sistema de refrigeracao por absorcao: alternativa para pequenas comunidades agricolas isoladas

    Energy Technology Data Exchange (ETDEWEB)

    Zukowski Junior, Joel Carlos; Marcon, Rogerio Olavo; Reys, Marcos Alves dos [Centro Universitario Luterano de Palmas (CEULP), TO (Brazil); Cortez, Luis Augusto Barbosa [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico (NIPE)

    2004-07-01

    The lack of electrical energy in several localities of Brazil results in a slow perspective of in terms of economic growth and scientific and technological development. In order to minimize these problems it is proposed the use of co-generation systems with small thermoelectric plants burning rice rusk (an abundant biomass in certain regions of Brazil, as for example the Tocantins State) as a heat source and to utilize the discharged steam from the turbine to generate cold through an absorption refrigeration system. The work intends to show a possible solution to the problems originated from the absence of electric power in small and isolated rural villages, also problems of processing storage of agricultural residues and to generate cold for several applications. (author)

  6. Potential Energy Savings in Refrigeration Systems Using Optimal Setpoints

    DEFF Research Database (Denmark)

    Larsen, Lars Finn Slot; Thybo, Claus

    2004-01-01

    Energy efficiency of refrigeration systems has gradually been improved with help of control schemes utilizing the more flexible components. This paper proposes an approach in line with this trend, where a suboptimal condenser pressure is found in order to minimize the energy consumption. The obje......Energy efficiency of refrigeration systems has gradually been improved with help of control schemes utilizing the more flexible components. This paper proposes an approach in line with this trend, where a suboptimal condenser pressure is found in order to minimize the energy consumption....... The objective is to give an idea of how this optimization scheme works as well as to show what amount of energy it is possible to save. A steady state model of a simple refrigeration system will be used as a basis for the optimization....

  7. Chaotic systems with absorption

    CERN Document Server

    Altmann, Eduardo G; Tél, Tamás

    2013-01-01

    Motivated by applications in optics and acoustics we develop a dynamical-system approach to describe absorption in chaotic systems. We introduce an operator formalism from which we obtain (i) a general formula for the escape rate $\\kappa$ in terms of the natural conditionally-invariant measure of the system; (ii) an increased multifractality when compared to the spectrum of dimensions $D_q$ obtained without taking absorption and return times into account; and (iii) a generalization of the Kantz-Grassberger formula that expresses $D_1$ in terms of $\\kappa$, the positive Lyapunov exponent, the average return time, and a new quantity, the reflection rate. Simulations in the cardioid billiard confirm these results.

  8. Plant-wide performance optimisation – The refrigeration system case

    DEFF Research Database (Denmark)

    Izadi-Zamanabadi, Roozbeh; Green, Torben; Razavi-Far, Roozbeh;

    2012-01-01

    This paper investigates the problem of plant-wide performance optimisation seen from an industrial perspective. The refrigeration system is used as a case study, because it has a distributed control architecture and operates in steady state conditions, which is common for many industrial applicat......This paper investigates the problem of plant-wide performance optimisation seen from an industrial perspective. The refrigeration system is used as a case study, because it has a distributed control architecture and operates in steady state conditions, which is common for many industrial...

  9. Modelling and Multi-Variable Control of Refrigeration Systems

    DEFF Research Database (Denmark)

    Larsen, Lars Finn Slot; Holm, J. R.

    2003-01-01

    In this paper a dynamic model of a 1:1 refrigeration system is presented. The main modelling effort has been concentrated on a lumped parameter model of a shell and tube condenser. The model has shown good resemblance with experimental data from a test rig, regarding as well the static as the dyn......In this paper a dynamic model of a 1:1 refrigeration system is presented. The main modelling effort has been concentrated on a lumped parameter model of a shell and tube condenser. The model has shown good resemblance with experimental data from a test rig, regarding as well the static...

  10. A fault tolerant superheat control strategy for supermarket refrigeration systems

    DEFF Research Database (Denmark)

    Vinther, Kasper; Izadi-Zamanabadi, Roozbeh; Rasmussen, Henrik;

    2013-01-01

    in a plug & play fashion. The strategy is outlined by means of procedural steps as well as a flow chart that also illustrates the process of automatic tuning of the maximum slope-seeking controller. Test results are furthermore presented for a display case in a full scale CO2 supermarket refrigeration......In this paper, a fault tolerant control (FTC) strategy is proposed for evaporator superheat control in supermarket refrigeration systems. Conventional control uses a pressure and temperature sensor for this purpose, however, the pressure sensor can fail to function. A contingency control strategy......, based on a maximum slope-seeking control method and only a single temperature sensor, is developed to drive the evaporator outlet temperature to a level that gives a suitable superheat of the refrigerant. The FTC strategy requires no a priori system knowledge or additional hardware and functions...

  11. Compounds produced by motor burnouts of refrigeration systems

    Energy Technology Data Exchange (ETDEWEB)

    Koester, C.; Hawley-Fedder, R.; Foiles, L.

    1995-05-24

    The phase-out of chlorofluorocarbons has necessitated the introduction of alternate refrigerants. R22 (CF{sub 2}ClH), R134a (CF{sub 3}CH{sub 2}F), and R507 (50/50 CHF{sub 2}CF{sub 3}/CF{sub 3}CH{sub 3}) are newer fluids which are used in cooling systems. Recently, concern over the possible formation of toxic compounds during electrical arcing through these fluids has prompted us to identify their electrical breakdown products by electron ionization GC/MS. For example, it is known that perfluoroisobutylene (PFIB), which have an threshold limit value of 10 ppb (set by the American Conference of Government Industrial Hygienists), is produced from the thermal and electrical breakdown of some refrigerants. We have used specially designed test cells, equipped with electrodes, to simulate the electrical breakdown of R22, R134a, and R507 in refrigeration systems.

  12. Conference on Refrigeration for Cryogenic Sensors and Electronic Systems

    CERN Document Server

    Sullivan, D B; McCarthy, S E; Cryogenic Refrigeration Conference; International Cryocooler Conference; Cryocoolers 1

    1981-01-01

    This proceedings documents the output of a meeting of refrigeration specialists held at the National Bureau of Standards, Boulder, CO, on October 6 and 7, 1980. Building on an earlier invitation-only meeting in 1977, the purpose of this first open meeting was to discuss progress in the development of refrigeration systems to cool cryogenic sensors and electronic systems in the temperature range below 20 K and with required cooling capacities below 10 W. The meeting was jointly sponsored by the International Institute of Refrigeration - Commission A1/2, the Office of Naval Research, the Naval Research Laboratory, the Cryogenic Engineering Conference, and the National Bureau of Standards. This first open cryocooler conference consisted of 23 papers presented by representatives of industry, government, and academia. The conference proceedings reproduced here was published by the National Bureau of Standards in Boulder, Colorado as NBS Special Publication #607. Subsequent meetings would become known as the Intern...

  13. Optimising performance in steady state for a supermarket refrigeration system

    DEFF Research Database (Denmark)

    Green, Torben; Kinnaert, Michel; Razavi-Far, Roozbeh;

    2012-01-01

    Using a supermarket refrigeration system as an illustrative example, the paper postulates that by appropriately utilising knowledge of plant operation, the plant wide performance can be optimised based on a small set of variables. Focusing on steady state operations, the total system performance...

  14. Optimising Performance in Steady State for a Supermarket Refrigeration System

    DEFF Research Database (Denmark)

    Green, Torben; Kinnaert, Michel; Razavi-Far, Roozbeh;

    2012-01-01

    Using a supermarket refrigeration system as an illustrative example, the paper postulates that by appropriately utilising knowledge of plant operation, the plant wide performance can be optimised based on a small set of variables. Focusing on steady state operations, the total system performance...

  15. Synchronization and Desynchronizing Control Schemes for Supermarket Refrigeration Systems

    DEFF Research Database (Denmark)

    Larsen, Lars Finn Sloth; Thybo, Claus Thybo; Izadi-Zamanabadi, Roozbeh;

    2007-01-01

    A supermarket refrigeration system is a hybrid system with switched nonlinear dynamics and discrete-valued input variables such as opening/closing of valves and start/stop of compressors. Practical and simulation studies have shown that the use of distributed hysteresis controllers to operate the...

  16. A Case Study of a Low Powervapour Compression Refrigeration System

    Science.gov (United States)

    Abinav, R.; Nambiar, G. K.; Sahu, Debjyoti

    2016-09-01

    Reported in this paper is a case study on a normal vapor compression refrigeration system which is expected to be run by photovoltaic panels to utilize minimum grid power. A small 120 W refrigerator is fabricated out of commercially available components and run by an inverter and battery connected to solar photovoltaic panel as well as grid. Temperature at several points was measured and the performance was evaluated. The Coefficient of performance (COP) to run such refrigerator is estimated after numerical simulation of major components namely, evaporator, condenser and a capillary tube. The simulation was done to obtain an effective cooling temperature and the results were compared with measured temperatures. Calculation proves to be in conformity with the actual model.

  17. 46 CFR 154.1750 - Butadiene or vinyl chloride: Refrigeration system.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Butadiene or vinyl chloride: Refrigeration system. 154... and Operating Requirements § 154.1750 Butadiene or vinyl chloride: Refrigeration system. A refrigeration system for butadiene or vinyl chloride must not use vapor compression unless it: (a) Avoids...

  18. Development of a Quadcon Refrigerated Container with First Generation Prototype Solar Adsorption Refrigeration System

    Science.gov (United States)

    2011-06-01

    above the generators.  Open both valves on either side of the connection.  Connect the steel-braided flexible hose from the evaporator suction line...on the rear of the QuadCon to the suction line connection point above the generators on the refrigeration unit (both fittings have ball-valves...continuing to discharge to the water bucket .  Disconnect manifold  Cap-off fill ports.  The system is now ready to operate. C-8.1.4 Operation

  19. CoolPack – Simulation tools for refrigeration systems

    DEFF Research Database (Denmark)

    Jakobsen, Arne; Rasmussen, Bjarne D.; Andersen, Simon Engedal

    1999-01-01

    CoolPack is a collection of programs used for energy analysis and optimisation of refrigeration systems. CoolPack is developed at the Department of Energy Engineering at the Technical University of Denmark. The Danish Energy Agency finances the project. CoolPack is freeware and can be downloaded...

  20. Data-Driven Predictive Direct Load Control of Refrigeration Systems

    DEFF Research Database (Denmark)

    Shafiei, Seyed Ehsan; Knudsen, Torben; Wisniewski, Rafal;

    2015-01-01

    A predictive control using subspace identification is applied for the smart grid integration of refrigeration systems under a direct load control scheme. A realistic demand response scenario based on regulation of the electrical power consumption is considered. A receding horizon optimal control ...

  1. Plant-wide performance optimisation – The refrigeration system case

    DEFF Research Database (Denmark)

    Green, Torben; Razavi-Far, Roozbeh; Izadi-Zamanabadi, Roozbeh;

    2012-01-01

    This paper investigates the problem of plant-wide performance optimisation seen from an industrial perspective. The refrigeration system is used as a case study, because it has a distributed control architecture and operates in steady state conditions, which is common for many industrial applicat...

  2. Generalized Performance Characteristics of Refrigeration and Heat Pump Systems

    Directory of Open Access Journals (Sweden)

    Mahmoud Huleihil

    2010-01-01

    Full Text Available A finite-time generic model to describe the behavior of real refrigeration systems is discussed. The model accounts for finite heat transfer rates, heat leaks, and friction as different sources of dissipation. The performance characteristics are cast in terms of cooling rate (r versus coefficient of performance (w. For comparison purposes, various types of refrigeration/heat pump systems are considered: the thermoelectric refrigerator, the reverse Brayton cycle, and the reverse Rankine cycle. Although the dissipation mechanisms are different (e.g., heat leak and Joule heating in the thermoelectric refrigerator, isentropic losses in the reverse Brayton cycle, and limits arising from the equation of state in the reverse Rankine cycle, the r−w characteristic curves have a general loop shape. There are four limiting types of operation: open circuit in which both r and w vanish in the limit of slow operation; short circuit in which again r and w vanish but in the limit of fast operation; maximum r; maximum w. The behavior of the considered systems is explained by means of the proposed model. The derived formulae could be used for a quick estimation of w and the temperatures of the working fluid at the hot and cold sides.

  3. 49 CFR 173.5b - Portable and mobile refrigeration systems.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Portable and mobile refrigeration systems. 173.5b...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS General § 173.5b Portable and mobile refrigeration... refrigeration systems, which may or may not be permanently mounted to a transport vehicle, used for...

  4. OPTIMAL SYSNTHESIS PROCESSES OF LOW-TEMPERATURE CONDENSATION ASSOCIATED OIL GAS PLANT REFRIGERATION SYSTEM

    OpenAIRE

    O. Ostapenko; O. Yakovleva; M. Khmelniuk; Zimin, A.

    2015-01-01

    Design of modern high-efficient systems is a key priority for the Energy Sector of Ukraine. The cooling technological streams of gas and oil refineries, including air coolers, water cooling and refrigeration systems for specific refrigerants are the objectives of the present study. Improvement of the refrigeration unit with refrigerant separation into fractions is mandatory in order to increase cooling capacity, lowering the boiling point of coolant and increasing the coefficient of target hy...

  5. Development of helium refrigeration/ liquefaction system at BARC, India

    Science.gov (United States)

    Ansari, N. A.; Goyal, M.; Chakravarty, A.; Menon, Rajendran S.; Jadhav, M.; Rane Nair, T., Sr.; Kumar, J.; Kumar, N.; Bharti, SK; Chakravarty, Abhilash; Jain, A.; Joemon, V.

    2017-02-01

    An experimental helium refrigerator/liquefier, using ultra high speed cryogenic turboexpanders, is designed and developed at Cryo-Technology Division, BARC. The developed system is based on the modified Claude cycle. The developed system is presently fully functional consisting of process compressor with gas management system, coldbox, helium receiver Dewar, tri-axial transfer line and helium recovery system. Extended trial runs are conducted to evaluate the performance of the developed system. During these trials, liquefaction rate of around 32 l/hr and refrigeration capacity of around 190W is achieved. The paper addresses design, development and commissioning aspects of the developed helium liquefier along with results of performance evaluation trial runs.

  6. OPTIMAL SYSNTHESIS PROCESSES OF LOW-TEMPERATURE CONDENSATION ASSOCIATED OIL GAS PLANT REFRIGERATION SYSTEM

    Directory of Open Access Journals (Sweden)

    O. Ostapenko

    2015-10-01

    Full Text Available Design of modern high-efficient systems is a key priority for the Energy Sector of Ukraine. The cooling technological streams of gas and oil refineries, including air coolers, water cooling and refrigeration systems for specific refrigerants are the objectives of the present study. Improvement of the refrigeration unit with refrigerant separation into fractions is mandatory in order to increase cooling capacity, lowering the boiling point of coolant and increasing the coefficient of target hydrocarbons extraction from the associated gas flow. In this paper it is shown that cooling temperature plays significant role in low-temperature condensation process. Two operation modes for refrigeration unit were proposed: permanent, in which the concentration of the refrigerant mixture does not change and dynamic, in which the concentration of refrigerant mixtures depends on the ambient temperature. Based on the analysis of exergy losses the optimal concentration of refrigerant mixtures propane/ethane for both modes of operation of the refrigeration unit has been determined. On the basis of the conducted pinch-analysis the modification of refrigeration unit with refrigerant separation into fractions was developed. Additional recuperative heat exchangers for utilization heat were added to the scheme. Several important measures to increase the mass flow rate of refrigerant through the second section of the refrigeration centrifugal compressor from 22.5 to 25 kg/s without violating the agreed operational mode of the compressor sections were implemented.

  7. Corrosion inhibitor for aqueous ammonia absorption system

    Science.gov (United States)

    Phillips, Benjamin A.; Whitlow, Eugene P.

    1998-09-22

    A method of inhibiting corrosion and the formation of hydrogen and thus improving absorption in an ammonia/water absorption refrigeration, air conditioning or heat pump system by maintaining the hydroxyl ion concentration of the aqueous ammonia working fluid within a selected range under anaerobic conditions at temperatures up to 425.degree. F. This hydroxyl ion concentration is maintained by introducing to the aqueous ammonia working fluid an inhibitor in an amount effective to produce a hydroxyl ion concentration corresponding to a normality of the inhibitor relative to the water content ranging from about 0.015 N to about 0.2 N at 25.degree. C. Also, working fluids for inhibiting the corrosion of carbon steel and resulting hydrogen formation and improving absorption in an ammonia/water absorption system under anaerobic conditions at up to 425.degree. F. The working fluids may be aqueous solutions of ammonia and a strong base or aqueous solutions of ammonia, a strong base, and a specified buffer.

  8. Energy optimization of a refrigerating system for fast freezing and storage of food supplies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-11-01

    The project concerns the energy optimization of a refrigerating plant for fast freezing and storage of food stocks, by means of a microprocessor automated system. The system controls the factory`s main installations: refrigerating compressors, fans of the refrigerating batteries, water and oil pumps and evaporative towers. It optimizes efficiency and allows to reduce energy costs. The system also performs trend analyses over a wide range of process parameters (ammonia, temperature and pressure, temperature values in the cold room, outside temperature, temperature and pressure of compressor oil, etc.). Fundamentally, the project aims to reduce energy costs; furthermore, it has a number of side targets, i.e.: - to minimize manual operation; - to obtain accurate fault diagnostics and alarm reports; - to provide data on electric energy absorption which will serve to work out the energy account report and the optimization of the electric energy supply contract; - to provide historical data on factory operation. On the whole, the system has proved technically successful: in particular, although energy saving amounted to 6.02% of the previous total energy consumption, which is lower than the expected 18%, nevertheless the system has greatly contributed to reduce manual operation and improve fault diagnostics and alarm report. (author). 2 refs., 3 figs., 6 tabs., 3 photos.

  9. Modeling Supermarket Refrigeration Systems for Supervisory Control in Smart Grid

    DEFF Research Database (Denmark)

    Shafiei, Seyed Ehsan; Rasmussen, Henrik; Stoustrup, Jakob

    2013-01-01

    A modular modeling approach of supermarket refrigeration systems (SRS) which is appropriate for smart grid control purposes is presented in this paper. Modeling and identification are performed by just knowing the system configuration and measured data disregarding the physical details. So...... regarding their power/energy consumptions in the future smart grids. Moreover, the developed model is validated by real data collected from a supermarket in Denmark. The utilization of the produced model is also illustrated by a simple simulation example....

  10. Modular Modelling and Simulation Approach - Applied to Refrigeration Systems

    DEFF Research Database (Denmark)

    Sørensen, Kresten Kjær; Stoustrup, Jakob

    2008-01-01

    This paper presents an approach to modelling and simulation of the thermal dynamics of a refrigeration system, specifically a reefer container. A modular approach is used and the objective is to increase the speed and flexibility of the developed simulation environment. The refrigeration system...... is divided into components where the inputs and outputs are described by a set of XML files that can be combined into a composite system model that may be loaded into MATLABtrade. A set of tools that allows the user to easily load the model and run a simulation are provided. The results show a simulation...... speed-up of more than a factor of three by partitioning the model into smaller parts, and thereby isolating fast and slow dynamics. As a cost there is a reduction in accuracy which in the example considered is less than one percent....

  11. 太阳能溴化锂吸收式制冷系统吸收特性的研究%Characteristics Research of Lithium Bromide Absorption Refrigeration System with Solar Energy

    Institute of Scientific and Technical Information of China (English)

    胡晓景; 林浩斌; 何德辉; 庞汉文

    2014-01-01

    In this paper, the absorber designemploys aheat and mass transfer separation devicebya pre-cooler and spray absorber to achieve the separation of the absorption process. The absorber modelisestablished to analyze the influence factors on heat and mass transfer, including the temperaturesof chilled water outlet,cooling water inletandhot water, spray temperature,as well asspray density. Itis cleared thattheheat andmass transfer separation inthe absorption process can be strengthened, and the system can also obtaina higher coefficient of performance.%太阳能溴化锂吸收式制冷系统的吸收器采用传热、传质分离装置,利用预冷器预先冷却和喷淋吸收的方法完成对传热、传质的分离。通过建立吸收器的计算模型,分析冷冻水出口温度、冷却水进口温度、热水温度、喷淋温度、喷淋密度等因素对传热、传质的影响。利用传热、传质分离方法,使系统的吸收特性得到强化,从而使系统获得较高的性能系数。

  12. Analysis of synchronization in a supermarket refrigeration system

    Institute of Scientific and Technical Information of China (English)

    Rafael WISNIEWSKI; John LETH; Jakob G. RASMUSSEN

    2014-01-01

    In a supermarket refrigeration, the temperature in a display case, surprisingly, influences the temperature in other display cases. This leads to a synchronous operation of all display cases, in which the expansion valves in the display cases turn on and off at exactly the same time. This behavior increases both the energy consumption and the wear of components. Besides this practical importance, from the theoretical point of view, synchronization, likewise stability, Zeno phenomenon, and chaos, is an interesting dynamical phenomenon. The study of synchronization in the supermarket refrigeration systems is the subject matter of this work. For this purpose, we model it as a hybrid system, for which synchronization corresponds to a periodic trajectory. To examine whether it is stable, we transform the hybrid system to a single dynamical system defined on a torus. Consequently, we apply a Poincar ´e map to determine whether this periodic trajectory is asymptotically stable. To illustrate, this procedure is applied for a refrigeration system with two display-cases.

  13. 烟气型吸收式制冷机的变工况特性研究%Off-Design Performance of an Exhaust-Fired Absorption Refrigerator

    Institute of Scientific and Technical Information of China (English)

    郑剑娇; 郭培军; 隋军; 韩巍; 石文星; 金红光

    2012-01-01

    基于分布式冷热电联产系统变工况运行的实际需要,建立了烟气型双效溴化锂吸收式制冷机的变工况模型。制冷机变工况模拟计算时,保持浓溶液流量及换热系数(高压发生器除外)不变,得到了烟气进口温度、烟气流量及冷却水进口温度变化时的制冷机各重要性能参数曲线,发现当烟气流量低于50%时,COP下降较快,冷却水进口温度降低时有利于制冷机运行,但是要注意防止浓溶液结晶。制冷机额定工况模拟计算时,与已有文献进行对比,验证模型的可靠性。%This paper proposed a mathematical model to simulate the off-design performance of an exhaust-fired double-effect absorption refrigerator in a CCHP (Combined cooling, heating and power) system. Effects of exhaust gas inlet temperature and flow rate , cooling water inlet temperature on the performance of absorption refrigerator have been investigated, with the assumptions of constant value of strong solution flow rate and heat transfer coefficients. When the exhaust gas flow ratio is below 50%, COP drops quickly. The decrease of cooling water inlet temperature can improve the performance of absorption refrigerator, with the prevention of solution crystallization. The model has been compared with a published model to validate.

  14. Theoretical and Experimental Study on the Enhancement Effect of Mechanical Vibration on Absorption Refrigeration%机械振动对吸收式制冷强化作用的理论与试验研究

    Institute of Scientific and Technical Information of China (English)

    申江; 邹国文; 王建民; Josephine Lau; 申子奇; 孙欢

    2016-01-01

    针对吸收式制冷机的传热传质过程,提出了一种通过振动来强化其过程的方法。搭建了相关的试验台,将一台吸收式制冷机组放置在一个电动振动台上,电动振动台的频率和振幅可调节,对吸收式制冷机组在振动情况下的运行情况进行了试验研究,探究振动对其传热传质的强化效果。%A new method of enhancing the heat and mass transfer process of absorption refrigerating machine by adding vibration into the system.Relevant test bench had been set up thus an absorption refrigerating unit was put on the top of the vibration table and the frequency and amplitude of the vibration table can be regulated to change the running conditions of the absorption refriger-ating unit to explore the effects of vibration on the heat and mass transfer process of absorption refrigerating machine.

  15. Two-statge sorption type cryogenic refrigerator including heat regeneration system

    Science.gov (United States)

    Jones, Jack A. (Inventor); Wen, Liang-Chi (Inventor); Bard, Steven (Inventor)

    1989-01-01

    A lower stage chemisorption refrigeration system physically and functionally coupled to an upper stage physical adsorption refrigeration system. Waste heat generated by the lower stage cycle is regenerated to fuel the upper stage cycle thereby greatly improving the energy efficiency of a two-stage sorption refrigerator. The two stages are joined by disposing a first pressurization chamber providing a high pressure flow of a first refrigerant for the lower stage refrigeration cycle within a second pressurization chamber providing a high pressure flow of a second refrigerant for the upper stage refrigeration cycle. The first pressurization chamber is separated from the second pressurization chamber by a gas-gap thermal switch which at times is filled with a thermoconductive fluid to allow conduction of heat from the first pressurization chamber to the second pressurization chamber.

  16. A Review on Diffusion Absorption Refrigeration Technology%扩散吸收式制冷技术进展

    Institute of Scientific and Technical Information of China (English)

    曹园树; 李华山; 龙臻; 卜宪标; 马伟斌

    2014-01-01

    The diffusion absorption refrigeration (DAR) that could use low-grade thermal sources such as solar energy and waste heat, etc, is an environmental-friendly and energy-efficient technology and thus has a very promising prospect. By reviewing the latest researches around the world, this paper introduces the main findings for the DAR technology from three aspects including working fluid selection, cycle thermodynamic analysis as well as system improvement and optimization. Also, the development trends and future research directions of the DAR technology are presented. Some research works done by our team are also summarized.%扩散吸收式制冷(Diffusion Absorption Refrigeration,DAR)能够利用低品位能源如太阳能和余热等,是一种有利于环保和能源高效利用的技术,具有十分广阔的应用前景。结合国内外的最新研究动态,本文从工质选择、循环热力学分析、系统改进与优化研究三个方面介绍扩散吸收式制冷技术的主要研究成果,并对扩散吸收式制冷技术的发展趋势以及未来研究方向进行展望。同时,对本课题组关于扩散吸收式制冷所做的工作也进行了总结。

  17. Application of Absorption Refrigeration in the Coal Mine & Fluent Simulation%吸收式制冷在深部矿井高温热害处理中的应用与FLUENT模拟计算

    Institute of Scientific and Technical Information of China (English)

    杨前明; 杜雪

    2015-01-01

    For mine deep heat damage problem, effective use of low-grade waste heat of the Swallet, as the driving heat absorption refrigeration constructed absorption refrigeration, resolve deep coal thermal damage circulatory system through the use of deep water source heat pump heated gushing, so lithium bromide absorption chiller cooling at the same time on the working surface, as the heat absorption refrigeration cycle using design using auxiliary heating source heat pump to drive the refrigeration unit Swallet system. Fluent use of numerical simulation of the text, comparative analysis of the effect of coal mine deep under the best air cooling conditions, to provide a theoretical basis for the absorption refrigeration technology in actual use in deep.%针对煤矿深部热害问题,提出了利用矿井涌水中的低品位废热,作为吸收式制冷的驱动热源,构建了吸收式制冷循环系统解决煤矿深部开采工作面热害问题。依据煤矿深井开采工作面热舒适度要求,对制冷降温系统热参数进行估算;运用Fluent数值模拟,对比分析出最佳送风条件下的煤矿深井制冷效果。理论分析与数值模拟结果表明了采用吸收式制冷循环解决煤矿深井开采工作面热害问题可行性。

  18. Synchronization Analysis of the Supermarket Refrigeration System

    DEFF Research Database (Denmark)

    Wisniewski, Rafal; Chen, Liang; Larsen, Lars Finn Sloth

    2009-01-01

    is analyzed using the bifurcation and chaos theory. It is demonstrated that the system can have a complex chaotic behavior, which is far from the synchronization. This shows that making the system chaotic is a good choice for a de-synchronization strategy. The positive maximum Lyapunov exponent is usually...... taken as an indication of the existence of chaos. It is used in the paper as a measure of performance for the tendency of the system to synchronize, that is, the higher value of the maximum Lyapunov exponent the lower risk for synchronization....

  19. On subcooler design for integrated two-temperature supermarket refrigeration system

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Liang [Institute of Refrigeration and Cryogenics, Shanghai Jiaotong University, Shanghai 200240 (China); Zhang, Chun-Lu [College of Mechanical Engineering, Tongji University, No. 4800, Cao An Highway, Shanghai 201804 (China)

    2011-01-15

    The energy saving opportunity of supermarket refrigeration systems using subcooler between the medium-temperature (MT) refrigeration system and the low-temperature (LT) refrigeration system has been identified in the previous work. This paper presents a model-based comprehensive analysis on the subcooler design. The optimal subcooling control is discussed as well. With optimal subcooler size and subcooling control, the maximum energy savings of integrated two-temperature supermarket refrigeration system using R404A or R134a as working fluid can achieve 27% or 20%, respectively. The load ratio of MT to LT system and the operating conditions have considerable impact on the energy savings. (author)

  20. Analysis of Synchronization of Supermarket Refrigeration System

    DEFF Research Database (Denmark)

    Zheng, Li; Larsen, Lars Finn Sloth; Izadi-Zamanabadi, Roozbeh

    2017-01-01

    Hybrid control has in the recent years drawn considerable attention in academia as it poses a large number of theoretical and computational challenges. The interested scientific community has proposed various methods to address some of the problems related to modeling and control of hybrid system...

  1. OPTIONS FOR REDUCING REFRIGERANT EMISSIONS FROM SUPERMARKET SYSTEMS

    Science.gov (United States)

    The report was prepared to assist personnel responsible for the design, construction, and maintenance of retail food refrigeration equipment in making knowledgeable decisions regarding the implementation of refrigerant-emissions-reducing practices and technologies. It characteriz...

  2. Performance modeling of optical refrigerators

    Energy Technology Data Exchange (ETDEWEB)

    Mills, G.; Mord, A. [Ball Aerospace and Technologies Corp., Boulder, CO (United States). Cryogenic and Thermal Engineering

    2006-02-15

    Optical refrigeration using anti-Stokes fluorescence in solids has several advantages over more conventional techniques including low mass, low volume, low cost and no vibration. It also has the potential of allowing miniature cryocoolers on the scale of a few cubic centimeters. It has been the topic of analysis and experimental work by several organizations. In 2003, we demonstrated the first optical refrigerator. We have developed a comprehensive system-level performance model of optical refrigerators. Our current version models the refrigeration cycle based on the fluorescent material emission and absorption data at ambient and reduced temperature for the Ytterbium-ZBLAN glass (Yb:ZBLAN) cooling material. It also includes the heat transfer into the refrigerator cooling assembly due to radiation and conduction. In this paper, we report on modeling results which reveal the interplay between size, power input, and cooling load. This interplay results in practical size limitations using Yb:ZBLAN. (author)

  3. Evaluation of a system of refrigeration with absorption cycle using the direct burning of natural gas for tropical fruits storage; Avaliacao de um sistema de refrigeracao com ciclo de absorcao utilizando a queima direta de gas natural para armazenamento de frutas tropicais

    Energy Technology Data Exchange (ETDEWEB)

    Bartolomeu, Lair S.; Torres, Ednildo A. [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Escola Politecnica. Lab. de Energia e Gas; Silva, Gabriel F. [Universidade Federal de Sergipe (UFS), Aracaju, SE (Brazil); Martins, Ronaldo M. [PETROBRAS, Rio de Janeiro, RJ (Brazil). Materiais. CQDM; Campos, Michel F. [PETROBRAS, Rio de Janeiro, RJ (Brazil). Gerencia de Tecnologia do Gas Natural. Rede GasEnergia

    2004-07-01

    This work has the purpose to analyze an alternative method in the conservation of tropical fruits in chamber cooled through the technology of use of the natural gas as energy source. The study it was carried through in chiller of absorption, Robur model, of 5TR, which meets in the campus of the Federal University of Sergipe (UFS/LEG). The energy analysis had as objective to study the process involving the cycle and its components. Of the analysis of first law was gotten a power of refrigeration of 8,8 kW and a COP=0,32 and the analysis of second law {beta}=0,29. The exergetic analysis had for intention to evaluate the amount and the quality of the energy in the system. The heat generator was the component that presented the biggest irreversibility, whose relation with the total irreversibility was about 70%. In the absorber the lesser exergetic efficiency was verified. Project is supported by the GasEnergia/PETROBRAS. (author)

  4. Thermodynamic analysis of a novel compact power generation and waste heat operated absorption, ejector-jet pump refrigeration cycle

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Anil; Kumar, Raj [YMCA University of Science and Technology, Faridabad (India)

    2014-09-15

    An R-152a ejector-jet pump refrigeration cycle and a LiBr-H{sub 2}O absorption refrigeration cycle have been integrated with a renewable energy power generator for making a proposed 'novel compact cogeneration cycle'. The exergy analysis of this proposed cycle leads to a possible performance improvement. Nearly 71.12% of the input exergy is destructed due to irreversibilities in the different components. The useful exergy output is around 7.12%. The exhaust exergy lost to the environment is 21.76%, which is lower than the exhaust energy lost 37.6% of the input energy, while the useful energy output is approximately 19.3%. The refrigerants used and the exhaust gas emissions samples are found to be favourable for reducing the global environmental related problems. The results also show that the coupling of the entrainment ratios of the ejector and jet pump has great effect on the exergy and energy efficiency.

  5. Control Methods for Energy Management of Refrigeration Systems

    DEFF Research Database (Denmark)

    Shafiei, Seyed Ehsan

    In this study, a high fidelity model for supermarket refrigeration systems is developed. The problem of energy management is investigated under two different demand-side management schemes: indirect and direct load control. The former is based on the electricity price incentive, and in the latter...... the consumption is directly managed by a third party based on a contract. For the indirect load control, we propose two different supervisory control approaches using model predictive control (MPC) technique to address the problem of electricity cost minimization. For the direct load control, three different...

  6. Feasibility and Basic Design of Solar Integrated Absorption Refrigeration for an Industry

    KAUST Repository

    Akhtar, Saad

    2015-08-28

    This paper presents a review of existing solar cooling technologies and a feasibility study of a solar absorption cooling system for a packaging facility at Tetrapak Lahore, Pakistan. The review includes brief description of existing chiller technologies and solar collectors. The case study includes analysis of the solar potential and design of the cooling system at considered site. The design calculations upon which the feasibility analysis is carried out are solar collector area and type, cooling capacity, cooling area. A comparison is made between solar cooling potential of Pakistan and existing sites all across the globe. Finally an economic analysis is carried out to demonstrate the financial viability of the new cooling system.

  7. A Comparative Study on the Environmental Impact of CO2 Supermarket Refrigeration Systems

    Energy Technology Data Exchange (ETDEWEB)

    Beshr, Mohamed [University of Maryland, College Park; Aute, Vikrant [University of Maryland, College Park; Sharma, Vishaldeep [ORNL; Abdelaziz, Omar [ORNL; Fricke, Brian A [ORNL; Radermacher, Reinhard [University of Maryland, College Park

    2014-01-01

    Supermarket refrigeration systems have high environmental impact due to their large refrigerant charge and high leak rates. Accordingly, the interest in using natural refrigerants, such as carbon dioxide (CO2), and new refrigerant blends with low GWP in such systems is increasing. In this paper, an open-source Life Cycle Climate Performance (LCCP) framework is presented and used to compare the environmental impact of three supermarket refrigeration systems. These systems include a transcritical CO2 booster system, a cascade CO2/N-40 system, and a baseline R-404A multiplex direct expansion system. The study is performed for cities representing different climates within the USA using EnergyPlus to simulate the systems' hourly performance. Finally, a parametric analysis is performed to study the impact of annual leak rate on the systems' LCCP.

  8. Progress and status of cryogenic refrigeration system for project Hydra

    Science.gov (United States)

    Yuan, J.; Catseman, F.; Tilleman, H.; Henderson, N.

    2015-12-01

    In the last two decades, HTS cables have been successfully demonstrated around the world, preparing HTS power cables for a full commercial introduction. Among the demonstration projects, circulating subcooled liquid nitrogen to maintain the HTS cable at operating temperature is a widely adopted approach. In this approach, the cooling systems are absolutely critical to the successful operation of the HTS cables. This paper describes the progress and status of the cryogenic refrigeration system designed and manufactured for project Hydra, which is a project jointly funded by the U.S. Department of Homeland Security Science and Technology Directorate, American Superconductor and Consolidated Edison Company of New York, Inc. American Superconductor is leading the team supported by Con Edison, Ultera, Altran Solutions, and DH Industries. The cable is an inherently fault current limiting HTS cable, approximately 200 m long and designed to carry 96 MVA at a distribution level voltage of 13.8 kV. The cable will be installed and energized near New York City. The refrigeration system was designed and manufactured by DH Industries. This paper provides details on the successful factory acceptance testing completed in November 2014.

  9. Simulation of a new combined absorption-compression refrigeration cycle%一种新型吸收-压缩复合制冷循环模拟

    Institute of Scientific and Technical Information of China (English)

    唐鹏武; 陈光明; 唐黎明; 刘利华

    2011-01-01

    A program compiled by Visual Basic language was used to simulate a new combined absorption-compression refrigeration cycle for performance research, including the effect of generation temperature , evaporation temperature, condensation temperature, heat flux and refrigeration capacity on system performance which was compared with a conventional vapour compression refrigeration cycle. Simulation results show that when generation temperature increases, the coefficient of performance ( COP) of new cycle increases first and then decreases. When evaporation temperature or heat flux increases, the COP of new cycle increases. When condensation temperature or refrigeration capacity increases, the COP of new cycle decreases. Under most simulation conditions, the COP of new cycle can be 10% higher than that of conventional vapour compression refrigeration cycle. The new cycle can not only reduce air conditioning load greatly, but also provide the possibility of efficient utilization of low grade energy such as solar energy.%为了对一种新型吸收-压缩复合制冷循环的性能进行模拟,使用Visual Basic语言自行编制了一个程序.该程序模拟了发生温度、蒸发温度、冷凝温度、加热量、制冷量对系统性能的影响,并将其性能与传统蒸气压缩式制冷循环作了对比.模拟结果表明:当发生温度升高时,新循环的制冷系数先增大后减小;当蒸发温度升高或加热量增大时,新循环的制冷系数增大;当冷凝温度升高或制冷量增大时,新循环的制冷系数减小.在大部分假定工况下,新循环的制冷系数比传统蒸气压缩式循环的高10%以上.新循环的提出不仅能够大幅度减少空调电力负荷,还为太阳能等低品位能源的高效利用提供了可能.

  10. PERFORMANCE STUDY OF A TWO STAGE SOLAR ADSORPTION REFRIGERATION SYSTEM

    Directory of Open Access Journals (Sweden)

    BAIJU. V

    2011-07-01

    Full Text Available The present study deals with the performance of a two stage solar adsorption refrigeration system with activated carbon-methanol pair investigated experimentally. Such a system was fabricated and tested under the conditions of National Institute of Technology Calicut, Kerala, India. The system consists of a parabolic solar concentrator,two water tanks, two adsorbent beds, condenser, expansion device, evaporator and accumulator. In this particular system the second water tank is act as a sensible heat storage device so that the system can be used during night time also. The system has been designed for heating 50 litres of water from 25oC to 90oC as well ascooling 10 litres of water from 30oC to 10oC within one hour. The performance parameters such as specific cooling power (SCP, coefficient of performance, solar COP and exergetic efficiency are studied. The dependency between the exergetic efficiency and cycle COP with the driving heat source temperature is also studied. The optimum heat source temperature for this system is determined as 72.4oC. The results show that the system has better performance during night time as compared to the day time. The system has a mean cycle COP of 0.196 during day time and 0.335 for night time. The mean SCP values during day time and night time are 47.83 and 68.2, respectively. The experimental results also demonstrate that the refrigerator has cooling capacity of 47 to 78 W during day time and 57.6 W to 104.4W during night time.

  11. Refrigerant Control Strategies for Residential Air-Conditioning and Heat-Pump System

    Institute of Scientific and Technical Information of China (English)

    SU Shun-yu; ZHANG Chun-zhi; CHEN Jian

    2009-01-01

    This paper simulated the optimal refrigerant charge inventory of a refrigeration system in air-con-ditioning operation and heat-pump operation respectively,and studied the refrigerant control strategies in this system.The void fraction in two-phase fluid region was calculated by Harms model.And based on distributed parameter model and Harms model,the refrigerant charge inventory in condenser and evaporator were calculated and analyzed in air-conditioning conditions and heat-pump conditions,respectively.The calculating results of dif-ferent refrigerant mass between refrigeration and heating conditions indicate that the optimal refrigerant charge inventory in heat-pump conditions is lower than that in air-eonditioning conditions.To avoid the decrease of COP due to the surplus refrigerant in heating conditions,we introduced the liquid reservoir control method and associate capillary control method.Both of them could increase the heating capacity of the air-source heat pump-The difference of optimal refrigerant charge inventory in air-conditioning and heat-pump system can be controlled by the liquid reservoir or the associate capillary.

  12. Economy of replacing a refrigerant in a cooling system for preparing chilled water

    Energy Technology Data Exchange (ETDEWEB)

    Kulcar, B. [Nafta-Petrochem, d.o.o., Mlinska ulica 5, 9220 Lendava (Slovenia); Goricanec, D.; Krope, J. [University of Maribor, Faculty of Chemistry and Chemical Engineering, Smetanova ulica 17, 2000 Maribor (Slovenia)

    2010-08-15

    Due to the negative impact of refrigerants containing Cl and Br on the ozone layer, these refrigerants are being replaced with refrigerants containing fluorine. The article describes the replacing of refrigerant R22 in a cooling system for preparing chilled water, used for cooling reactors producing phenol-formaldehyde resins. After analyzing the existing state and the capabilities of the cooling system, the refrigerant R22 was replaced with refrigerant R407C. For both refrigerants a calculation of the cooling system has been made, the results of which are given in the form of diagrams depending on the evaporation temperature of the refrigerant. Profitability evaluation of replacing a refrigerant was carried out using the method of the net present value (NPV), the coefficient of profitability and the period of time in which the investment is going to return itself. Also the calculations of the savings of electrical energy needed for the running of the compressors and the price of chilled water have been done, using the method of internal profitability level (IPL). (author)

  13. 太阳能驱动吸收式与吸附式制冷技术的比较分析研究%Comparison and Analytical Investigation of Solar Powered Absorption Refrigeration and Adsorption Refrigeration

    Institute of Scientific and Technical Information of China (English)

    朱斌祥; 孙李; 喻志强; 徐军; 牛晓文

    2016-01-01

    介绍了太阳能吸收式制冷技术与吸附式制冷技术,并对这2种技术的原理特性、应用领域、工质对、系统结构、效率损失等问题进行了比较分析研究。研究表明:吸收式技术制冷系数高,但吸附式制冷对驱动热源的温度要求低;2种制冷技术的制冷性能与集热器、发生器、吸收器、吸附床和工质对等的特性密切相关。本文为提高太阳能制冷的效率和应用领域、促进太阳能制冷技术的发展提供了一定的技术方向和理论参考。%The current technology of solar absorption refrigeration and adsorption refrigeration were introduced and compared in aspects of principle and properties,application area,working medium pairs,systematic structure and efficiency.It was shown that refrigeration coefficient of absorption refrigeration is higher,however adsorption refrigeration has lower requirement for driving heat source.Furthermore performance of these two refrigeration technology was highly related to collector,generator,absorber,adsorbent bed,working medium pairs and etc.This paper offers technical direction and theoretical reference for efficiency improvement, broaden of application and technology development of solar powered refrigeration.

  14. The LSST Camera 500 watt -130 degC Mixed Refrigerant Cooling System

    Energy Technology Data Exchange (ETDEWEB)

    Bowden, Gordon B.; Langton, Brian J.; /SLAC; Little, William A.; /MMR-Technologies, Mountain View, CA; Powers, Jacob R; Schindler, Rafe H.; /SLAC; Spektor, Sam; /MMR-Technologies, Mountain View, CA

    2014-05-28

    The LSST Camera has a higher cryogenic heat load than previous CCD telescope cameras due to its large size (634 mm diameter focal plane, 3.2 Giga pixels) and its close coupled front-end electronics operating at low temperature inside the cryostat. Various refrigeration technologies are considered for this telescope/camera environment. MMR-Technology’s Mixed Refrigerant technology was chosen. A collaboration with that company was started in 2009. The system, based on a cluster of Joule-Thomson refrigerators running a special blend of mixed refrigerants is described. Both the advantages and problems of applying this technology to telescope camera refrigeration are discussed. Test results from a prototype refrigerator running in a realistic telescope configuration are reported. Current and future stages of the development program are described. (auth)

  15. Modeling Supermarket Refrigeration Systems for Demand-Side Management

    Directory of Open Access Journals (Sweden)

    Jakob Stoustrup

    2013-02-01

    Full Text Available Modeling of supermarket refrigeration systems for supervisory control in the smart grid is presented in this paper. A modular modeling approach is proposed in which each module is modeled and identified separately. The focus of the work is on estimating the power consumption of the system while estimating the cold reservoir temperatures as well. The models developed for each module as well as for the overall integrated system are validated by real data collected from a supermarket in Denmark. The results show that the model is able to estimate the actual electrical power consumption with a high fidelity. Moreover a simulation benchmark is introduced based on the produced model for demand-side management in smart grid. Finally, a potential application of the proposed benchmark in direct control of the power/energy consumption is presented by a simple simulation example.

  16. Anti-synchronizing control for supermarket refrigeration systems

    DEFF Research Database (Denmark)

    Larsen, Lars Finn Sloth; Thybo, Claus; Wisniewski, Rafal

    2007-01-01

    Abstract—A supermarket refrigeration system is a hybrid system with switched nonlinear dynamics and discrete-valued input variables such as opening/closing of valves and start/stop of compressors. Practical and simulation studies have shown that the use of distributed hysteresis controllers...... to operate the valves leads to synchronization, meaning that the opening and closing actions of the valves coincide. Consequently, the compressor periodically has to work hard resulting in low efficiency, inferior control performance and a high wear on the compressor. In this paper we propose two control...... schemes of low complexity for desynchronizing the valve operations while improving performance. Simulation results indicate the potential increase in efficiency and reduction in wear comparing with traditional control schemes....

  17. Climate-friendly refrigerators for supermarkets. Comparative assessment of supermarket refrigeration systems; Klimafreundlich Kuehlen im Supermarkt. Vergleichende Bewertung von Supermarktkaelteanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2008-10-15

    On 5 September 2008, a meeting was held at the Federal Environmental Office (Umweltbundesamt, UBA) at Dessau where the results of the research project ''Comparative evaluation of the climate relevance of refrigeration plants and systems for supermarkets'' were presented and discussed among more than 50 experts. Towards the end of the meeting, the discussions became more heated as the underlying data base became the subject of attention. (orig.)

  18. Potential energy savings using dynamically optimizing control in refrigeration systems under daily variations in ambient temperature

    DEFF Research Database (Denmark)

    Larsen, Lars Finn Sloth; Thybo, Claus; Wisniewski, Rafal;

    2007-01-01

    The objective of this study is to investigate the energy saving potential for refrigeration systems by refrigeration more at the colder night time than at the warmer day time. The potential is evaluated using an optimal control policy and illustrated on a simulation example. The results show that...

  19. Combined Refrigeration Cycle for Thermal Power Plant Using Low Grade Waste Steam

    Directory of Open Access Journals (Sweden)

    Satish Maurya*,

    2014-02-01

    Full Text Available Now a days, In most of the thermal power plant, where low-pressure steam is being exhausted to the atmosphere as a waste steam. This waste heat could be use to operate many small preheating or cooling equipments or small scale plants. There are many refrigeration systems present for refrigeration and air condition purpose. Such as air refrigeration, vapour compression, vapour absorption etc. In this paper we have presented the concept of combined vapour absorption and vapour compression refrigeration system. We present about the idea discuss here that how a vapour absorption and vapour compression can be used together as one complete working refrigeration plant. By using such concept of refrigeration we can improve the co-efficient of performance of whole plant by minimizing the input. We can also named the system as waste heat recovery refrigeration system.

  20. Exergy Flows inside a One Phase Ejector for Refrigeration Systems

    Directory of Open Access Journals (Sweden)

    Mohammed Khennich

    2016-03-01

    Full Text Available The evaluation of the thermodynamic performance of the mutual transformation of different kinds of exergy linked to the intensive thermodynamic parameters of the flow inside the ejector of a refrigeration system is undertaken. Two thermodynamic metrics, exergy produced and exergy consumed, are introduced to assess these transformations. Their calculation is based on the evaluation of the transiting exergy within different ejector sections taking into account the temperature, pressure and velocity variations. The analysis based on these metrics has allowed pinpointing the most important factors affecting the ejector’s performance. A new result, namely the temperature rise in the sub-environmental region of the mixing section is detected as an important factor responsible for the ejector’s thermodynamic irreversibility. The overall exergy efficiency of the ejector as well as the efficiencies of its sections are evaluated based on the proposed thermodynamic metrics.

  1. Non-linear and adaptive control of a refrigeration system

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Larsen, Lars F. S.

    2011-01-01

    In a refrigeration process heat is absorbed in an evaporator by evaporating a flow of liquid refrigerant at low pressure and temperature. Controlling the evaporator inlet valve and the compressor in such a way that a high degree of liquid filling in the evaporator is obtained at all compressor ca...

  2. Thermodynamic Modeling of an Ammonia-Water Absorption System Associated with a Microturbine

    OpenAIRE

    Edson Bazzo; Janilson Arcangelo Rossa

    2009-01-01

    Thermodynamic modeling and Second Law analysis of a small-scale cogeneration system consisting of a 5 refrigerant ton absorption chiller connected by a thermosyphon heat exchanger to a 28 kWe natural gas microturbine are presented. The proposed configuration changes the heat source of the absorption chiller, replacing the original natural gas burning system. A computational algorithm was programmed to analyze the global efficiency of the combined cooling and power plant and the coefficient of...

  3. 太阳能单效溴化锂吸收式制冷空调技术研究现状%Research Status of Solar Single-effect Lithium Bromide Absorption Refrigeration and Air Conditioning Technology

    Institute of Scientific and Technical Information of China (English)

    周兴法; 谢应明; 谢振兴

    2014-01-01

    In view of the solar single-effect lithium bromide absorption refrigeration and air conditioning technology , which is used mostly in solar refrigeration technology at present , the solar collectors that are available for solar refrigeration are introduced in detail,large amounts of the cases of experimental study and simulation analysis are enumerated ,and finally a novel solar refrige-ration system with bubble pump is presented .Because of its several advantages such as quiet , small volume, energy conserva-tion,and cooling heat recovery ,it is an important development direction of solar absorption refrigeration system in terms of minia-turization.%针对目前太阳能制冷技术中应用最多的太阳能单效溴化锂吸收式制冷空调技术,介绍各种可用于太阳能制冷空调的集热器,列举大量的太阳能单效溴化锂吸收式制冷空调系统的试验研究和模拟分析的案例,最后提出一个新型太阳能无泵溴化锂吸收式制冷空调系统。该系统具有运行安静、体积小、节能、可回收冷却热等优点,是太阳能吸收式制冷系统小型化的一个重要发展方向。

  4. CO2 Supermarket Refrigeration Systems for Southeast Asia and the USA

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Vishaldeep [ORNL; Fricke, Brian A [ORNL; Bansal, Pradeep [ORNL

    2014-01-01

    This paper presents a comparative analysis of the annual energy consumption of these refrigeration systems in eighty eight cities from all climate zones in Southeast Asia. Also, the performance of the CO2 refrigeration systems is compared to the baseline R404A multiplex direct expansion (DX) system. Finally, the overall performance of the CO2 refrigeration systems in various climatic conditions in Southeast Asia is compared to that in the United States. For the refrigeration systems investigated, it was found that the Transcritical Booster System with Bypass Compressor (TBS-BC) performs better or equivalent to the R404A multiplex DX system in the northern regions of Southeast Asia (China and Japan). In the southern regions of Southeast Asia (India, Bangladesh, Burma), the R404A multiplex DX system and the Combined Secondary Cascade (CSC) system performs better than the TBS-BC.

  5. Plant-wide dynamic and static optimisation of supermarket refrigeration systems

    DEFF Research Database (Denmark)

    Green, Torben; Izadi-Zamanabadi, Roozbeh; Razavi-Far, Roozbeh;

    2013-01-01

    Optimising the operation of a supermarket refrigeration system under dynamic as well as steadystate conditions is addressedin thispaper. For thispurpose anappropriateperformance function that encompasses food quality, system efficiency, and also component reliability is established. The choice...

  6. ExPerimental Research on Vibrating Effect for AbsorPtion Refrigeration%振动对于吸收式制冷影响的实验研究

    Institute of Scientific and Technical Information of China (English)

    申江; 董斌; Josephine LaU; 申子奇; 王建民

    2014-01-01

    利用已搭建的装有电动振动系统的溴化锂吸收式制冷实验台,对溴冷机各主要部件的性能进行实验分析。主要分析振动对于吸收式制冷过程中传热和制冷性能的影响。通过实验数据的处理和分析可以看出;在低频振动状态下,蒸发器﹑吸收器内的换热效果均优于静止的情形,表明低频振动有利于强化换热,同时增加了机组制冷量,提高了机组 COP 值。%Lithium bromide absorption refrigeration testing with an electric vibrating system was established.Making use of the testing, performance of major parts of LiBr absorption chiller is analyzed.The main purpose is to analyze the effect of vibration on the performance of heat transfer and cooling during absorption refrigeration.The results indicate that compared with static conditions, the heat transfer property of the absorber and the evaporator has a better performance under vibrating conditions.The vibration contributes to heat transfer enhancement, increases refrigerating capacity and improves the COP.

  7. Clustering of absorption line systems

    CERN Document Server

    Petitjean, P

    1996-01-01

    Absorption line systems are luminosity unbiased tracers of the spatial distribution of baryons over most of the history of the Universe. I review the importance of studying the clustering properties of the absorbers and the impact of VLT in this subject. The primary aim of the project is to track the evolution of the structures of the Universe back in time.

  8. Cooling load and COP optimization of an irreversible Carnot refrigerator with spin-1/2 systems

    Directory of Open Access Journals (Sweden)

    Xiaowei Liu, Lingen Chen, Feng Wu, Fengrui Sun

    2011-09-01

    Full Text Available A model of an irreversible quantum refrigerator with working medium consisting of many non-interacting spin-1/2 systems is established in this paper. The quantum refrigeration cycle is composed of two isothermal processes and two irreversible adiabatic processes and is referred to as a spin quantum Carnot refrigeration cycle. Expressions of some important performance parameters, such as cycle period, cooling load and coefficient of performance (COP for the irreversible spin quantum Carnot refrigerator are derived, and detailed numerical examples are provided. The optimal performance of the quantum refrigerator at high temperature limit is analyzed with numerical examples. Effects of internal irreversibility and heat leakage on the performance are discussed in detail. The endoreversible case, frictionless case and the case without heat leakage are discussed in brief.

  9. Oil Return Measurements In A Unitary Split System Air Conditioner Using Different Refrigerant Mixtures

    OpenAIRE

    Feichter, Gabriel A.; Eckhard A. Groll; Kurtulus, Orkan; Meng, Ben

    2016-01-01

    The aim of the study presented in this paper is an experimental investigation of the oil return characteristics of alternative refrigerants for residential air conditioning systems using R22. Due to the phase-out of HCFC refrigerants, the production of R22 will be stopped by the year 2020. In some cases of vapor compression systems installed in the field, it will be necessary to replace the R22 with alternative drop-in refrigerants as a part of maintenance procedures. Since R22 system typical...

  10. Energetic, Exergetic and Exergoeconomic Analysis of CO2 Refrigeration Systems Operating in Hot Climates

    DEFF Research Database (Denmark)

    Gullo, Paride; Elmegaard, Brian; Cortella, Giovanni

    2015-01-01

    of the product of a R744 refrigeration solution with auxiliary compressor with those of a R744 conventional system, both of them operating in transcritical conditions. The results pointed out that the adoption of an auxiliary compressor resulted in an increase of the COP by approximately 18.7% over...... conditions. CO2 refrigeration system with parallel compression represents one of the solutions which have been proposed in the last few years in order to enhance the performance of a single-stage refrigeration system. The main target of this study is to compare the thermodynamic efficiency and the final cost...

  11. Experimental And Numerical Investigations of Ejector Jet Refrigeration System With Primary Stream Swirl

    OpenAIRE

    Parveen Banu, Jiautheen; Mallikarjuna, Jawali Maharudrappa; Mani, Annamalai

    2016-01-01

    Among the various heat powered refrigerated systems, vapour jet refrigeration system (VJRS) is attractive because of its simple and rugged nature. Ejector is a key component in VJRS and the performance of the whole system depends on the effective performance of the ejector. Ejector can be operated with low grade energy by utilizing the heat from solar energy, waste heat from industrial exhaust, automobile exhaust, etc, at minimum temperature of about 60°C[1]. Besides that, this system requir...

  12. A Case Study of a Low Power Vapour Adsorption Refrigeration System

    Science.gov (United States)

    Dinesh, Banala; Sai Manikanta, M.; Dishal Kumar, T.; Sahu, Debjyoti

    2016-09-01

    Industrial refrigeration is one of the most energy consuming sector. In conventional Vapor Compression refrigeration system, compressor is the major power consuming element. Vapor Adsorption refrigeration system is one of the best replacement for the Vapor Compression refrigeration system. Our main objective is to analyze, design and develop a Vapor Adsorption refrigeration system which is cost effective and environmental friendly. A prototype model that is capable of producing a temperature drop in closed evaporator chamber was designed, fabricated and tested. Activated carbon/Methanol pair is chosen as Adsorbent/Refrigerant pair. The system is analyzed in ANSYS 14.5 using the inlet conditions obtained from the experimental setup. The performances and effectiveness of the unit was studied by determining Refrigeration Effect (RE), Coefficient of Performance (COP) and explaining operational issues of the unit. The results obtained from the analysis and experiments have marginal difference in COP i.e. with an error percentage of 5.94%. The overall COP obtained is 0.34 through experiments and from analysis the COP obtained is approximately 0.32.

  13. Development and experimental investigation of a miniature-scale refrigeration system

    Energy Technology Data Exchange (ETDEWEB)

    Wu Yuting, E-mail: wuyuting@bjut.edu.c [Key Laboratory of Enhanced Heat Transfer and Energy Conservation, Ministry of Education and Key Laboratory of Heat Transfer and Energy Conversion, Beijing Municipality, College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100022 (China); Ma Chongfang; Zhong Xiaohui [Key Laboratory of Enhanced Heat Transfer and Energy Conservation, Ministry of Education and Key Laboratory of Heat Transfer and Energy Conversion, Beijing Municipality, College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100022 (China)

    2010-01-15

    Two generation miniature Wankel compressors with the cooling capacity of 300 W were developed. The weight of first generation compressor is 700 g and that of second generation is 400 g. A miniature spiral-tube type evaporator is developed which weighs 0.26 kg and a brazed aluminum multi-channel parallel type condenser is also developed which weighs 0.3 kg. Based on the development of above components, a miniature refrigeration system prototype with a cooling capacity of 300 W was integrated and the system weighs about 2.85 kg. An experimental system for miniature refrigeration system was set up. The tests of the performance of miniature refrigeration system were done. The experimental results indicated that the compression ratio of the compressor is above 3.0, the refrigerating output of the system is above 300 W and the coefficient of performance of the developed micro climate cooling system was about 2.3.

  14. ARTI refrigerant database

    Energy Technology Data Exchange (ETDEWEB)

    Calm, J.M.

    1996-11-15

    The Refrigerant Database is an information system on alternative refrigerants, associated lubricants, and their use in air conditioning and refrigeration. It consolidates and facilitates access to property, compatibility, environmental, safety, application and other information. It provides corresponding information on older refrigerants, to assist manufacturers and those using alternative refrigerants, to make comparisons and determine differences. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern.

  15. ARTI refrigerant database

    Energy Technology Data Exchange (ETDEWEB)

    Calm, J.M.

    1996-07-01

    The Refrigerant Database is an information system on alternative refrigerants, associated lubricants, and their use in air conditioning and refrigeration. It consolidates and facilitates access to property, compatibility, environmental, safety, application and other information. It provides corresponding information on older refrigerants, to assist manufacturers and those using alternative refrigerants, to make comparisons and determine differences. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern.

  16. ARTI refrigerant database

    Energy Technology Data Exchange (ETDEWEB)

    Calm, J.M. [Calm (James M.), Great Falls, VA (United States)

    1999-01-01

    The Refrigerant Database is an information system on alternative refrigerants, associated lubricants, and their use in air conditioning and refrigeration. It consolidates and facilities access to property, compatibility, environmental, safety, application and other information. It provides corresponding information on older refrigerants, to assist manufacturers and those using alternative refrigerants, to make comparisons and determine differences. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern.

  17. Three-dimensional Numerical Investigations on Ejector of Vapour Jet Refrigeration System

    OpenAIRE

    Jiautheen, Parveen Banu; Tiwari, Shaligram; Annamalai, Mani

    2014-01-01

    Vapour Jet Refrigeration System (VJRS) is preferred among various heat operated refrigeration systems because it has potential of utilizing low temperature heat source, consumes less electrical energy causing less atmospheric pollution and requires less maintenance cost due to absence of moving parts [1]. Ejector, a thermal compressor, is one of the crucial components of VJRS. Performance of the whole system is based on the satisfactory operation of the ejector. Hence, it has to be designed c...

  18. Control of Refrigeration Systems for Trade-off between Energy Consumption and Food Quality Loss

    DEFF Research Database (Denmark)

    Cai, Junping

    In supermarkets, control strategies determine both the energy consumption of refrigeration systems and the quality loss of refrigerated foodstuffs. The question is, what can be done to optimize the balance between quality loss and energy consumption? This thesis tries to answer this question by a...... strategy is through utilization of the thermal mass of the refrigerated foodstuffs, the day-night temperature variation and the capacity control of the compressor, to realize a trade-off between system energy consumption and food quality loss....

  19. Modeling of ammonia absorption chillers integration in energy systems of process plants

    Energy Technology Data Exchange (ETDEWEB)

    Bruno, J.C.; Castells, F. [Universitat Rovira i Virgili, Tarragona (Spain). Dept. d' Enginyeria Quimica; Miquel, J. [Universitat Politecnica de Catalunya (Spain). Dept. de Mecanica de Fluids

    1999-12-01

    A mathematical programming approach is proposed to study the integration of absorption chillers in combined heat and power plants. The aim of this work is to determine the economic viability of the introduction of ammonia absorption chillers in energy systems instead of using the more conventional compression cycles. This procedure selects the best refrigeration alternative taking into account both absorption and compression cycles. To select the most suitable refrigeration cycle for a given refrigeration load, it is not only necessary to model the performance of each cycle, but also to take into account the interactions between the energy system and the considered cycles, optimizing the performance of the global plant. This approach has been implemented in the computer program XV, and tested in an energy plant in the petrochemical complex of Tarragona (Catalunya, Spain). The refrigeration demands to be met are at 0 and -20{sup o}C. The results highlighted the benefit obtained with the simultaneous presence of ammonia absorption cycles and a cogeneration based energy plant. (author)

  20. EVALUATION OF A MULTIFUNCTIONAL VALVE ASSEMBLY IN A DIRECT EXPANSION REFRIGERATION SYSTEM REPORT

    Science.gov (United States)

    The report describes the performance, including energy consumption, of a refrigeration system incorporating a multifunctional valve (MXV assembly). The MXV assembly (consisting of additional liquid line, an XTC valve, and a larger thermostatic expansion valve) was installed on al...

  1. A central refrigeration system to support multiple environmental test chambers: Design, development, and evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Baca, R.G.; Miller, K.M.; Shipley, K.L.

    1990-11-01

    A pilot plant project was undertaken to develop a central refrigeration compressor station capable of providing the necessary cooling to a network of nine independently-controlled environmental test chambers operating at temperatures of {minus}85{degree}F to 350{degree}F. Design features of the central two-stage (cascade) vapor compression refrigeration system are described. Computer control of the central refrigeration station is a major contribution to the improved efficiency of the overall system. A second computer-control system was developed to perform the task of environmental chamber control, test management, and chamber performance monitoring. Data on performance of the Climatic Central Refrigeration System (CCRS) are presented. 7 refs., 18 figs.

  2. Advanced Supermarket Refrigeration/Heat Recovery Systems Vol 1 - Executive Summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-15

    Annex 26 is the first international project under the IEA Heat Pump Programme that links refrigeration and heat pump technology. Recovering heat from advanced supermarket refrigeration systems for space and water heating purposes seems obvious and is beneficial for owners and operators. Because there are world-wide a great number of supermarkets that offer frozen and chilled food under further growth of this sector may be expected, the amount of energy used for refrigeration is enormous and will likely increase substantially in the near future. This volume of the IEA Annex 26 final report contains a detailed summary of the Annex activities including principal conclusions from each participant.

  3. Energetic and exergetic analyses of carbon dioxide transcritical refrigeration systems for hot climates

    Directory of Open Access Journals (Sweden)

    Fazelpour Farivar

    2015-01-01

    Full Text Available In the last two decades many scientific papers and reports have been published in the field of the application of the carbon dioxide as a refrigerant for refrigeration systems and heat pumps. Special attention has been paid to the transcritical cycle. However, almost no papers discussed such cycles for hot climates, i.e., when the temperature of the environment is higher than 40ºС during a long period of time. This paper deals with the energetic and exergetic evaluation of a CO2 refrigeration system operating in a transcritical cycle under hot climatic conditions. The performance and exergy efficiency of the CO2 refrigeration system depend on the operation conditions. The effect of varying these conditions is also investigated as well as the limitations associated with these conditions.

  4. Absorption and adsorption chillers applied to air conditioning systems

    Science.gov (United States)

    Kuczyńska, Agnieszka; Szaflik, Władysław

    2010-07-01

    This work presents an application possibility of sorption refrigerators driven by low temperature fluid for air conditioning of buildings. Thermodynamic models were formulated and absorption LiBr-water chiller with 10 kW cooling power as well as adsorption chiller with silica gel bed were investigated. Both of them are using water for desorption process with temperature Tdes = 80 °C. Coefficient of performance (COP) for both cooling cycles was analyzed in the same conditions of the driving heat source, cooling water Tc = 25 °C and temperature in evaporator Tevap = 5 °C. In this study, the computer software EES was used to investigate the performance of absorption heat pump system and its behaviour in configuration with geothermal heat source.

  5. Optimism system refrigerator hybrid power (solar cell + actuator motor to traditional fisherman boat in Makassar

    Directory of Open Access Journals (Sweden)

    Soetyono Ch. Iskandar

    2016-10-01

    Full Text Available Research of Pre-eminent Donation of This college aimed at energetic refrigerator system planning of hybrid (solar cell + actuator motor at inclusion ship of fish in coming, principal from this research is, exploiting of dissociation energy of diatomic is newest with usage of diesel fuel technology cell as coolant system actuator at actuator motor plus fisherman ship. This research program planned in a period of three years to design freezing device of energetic fish of hybrid (solarcell + actuator motor fisherman ship, yields storage device basis barium product of energetic fish of hybrid.In first year, does with refer to study study about base material refrigerator and solar cell and makes energetic refrigerator system prototype of solar (laboratory scale. In second year, does study to design energetic refrigerator of hybrid (solar cell + actuator motor with laboratory scale productively energetic refrigerator prototype of hybrid with laboratory scale. In third year, application of energetic refrigerator system of hybrid (solar cell + actuator motor at fisherman ship Poetere in Makassar, expected can push and motivates fisherman public in developing and applies this technology, causing can increase quality of produce of fish and at the same time increases fisherman public economics value without using again ice block to make cool fisherman fishing boat hold.

  6. Refrigerating systems for the big CERN bubble chamber

    CERN Document Server

    Giger, U; Trepp, C

    1974-01-01

    A combined helium-hydrogen refrigerator has been installed for cooling the new CERN bubble chamber at Geneva. This article describes the cool-down of the bubble chamber and magnet, as well as emergency operation and control of the refrigerator. Besides the choice of basic conception and circuit, the plant components are dealt with too. The function of the bubble chamber and the development of the CERN proton synchrotron are described in order to facilitate understanding of the relationship between the Sulzer cryogenic plant and the CERN bubble chamber. Installations and equipment not manufactured by Sulzer are also mentioned. (1 refs).

  7. Refrigerating machine oil

    Energy Technology Data Exchange (ETDEWEB)

    Nozawa, K.

    1981-03-17

    Refrigerating machine oil to be filled in a sealed motorcompressor unit constituting a refrigerating cycle system including an electric refrigerator, an electric cold-storage box, a small-scaled electric refrigerating show-case, a small-scaled electric cold-storage show-case and the like, is arranged to have a specifically enhanced property, in which smaller initial driving power consumption of the sealed motor-compressor and easier supply of the predetermined amount of the refrigerating machine oil to the refrigerating system are both guaranteed even in a rather low environmental temperature condition.

  8. Thermodynamic modelling of a double-effect LiBr-H2O absorption refrigeration cycle

    Science.gov (United States)

    Iranmanesh, A.; Mehrabian, M. A.

    2012-12-01

    The goal of this paper is to estimate the conductance of components required to achieve the approach temperatures, and gain insights into a double-effect absorption chiller using LiBr-H2O solution as the working fluid. An in-house computer program is developed to simulate the cycle. Conductance of all components is evaluated based on the approach temperatures assumed as input parameters. The effect of input data on the cycle performance and the exergetic efficiency are investigated.

  9. Space Station thermal storage/refrigeration system research and development

    Science.gov (United States)

    Dean, W. G.; Karu, Z. S.

    1993-02-01

    single centralized radiator system. As per the scope of work of this task, the applicability of refrigeration system tailored to meet the specialized requirements of storage of food and biological samples was investigated. The issues addressed were the anticipated power consumption and feasible designs and cycles for meeting specific storage requirements. Further, development issues were assessed related to the operation of vapor compression systems in micro-gravity addressing separation of vapor and liquid phases (via capillary systems).

  10. Thermodynamical comparison and analysis of electric compression refrigeration cycle and absorption refrigeration cycle%电压缩式制冷循环与吸收式制冷循环的热力学比较分析

    Institute of Scientific and Technical Information of China (English)

    冯丽洁; 付林; 张世钢; 江亿

    2012-01-01

    Applying the exergy efficiency and exergy loss analysis method, calculates and compares the exergy efficiency between the electric compression refrigeration cycle and the single-effect absorption refrigeration cycle and the exergy losses of each part of the two cycles under the typical condition. The results show that the exergy efficiency of the two cycles is basically the same when the generator temperature and the heat source temperature are appropriately selected; most part of exercy losses of the electric compression refrigeration cycle occur in the compressor, and most part of exercy losses of the single-effect absorption refrigeration cycle occur in the absorber and generator. Discusses the improving methods for the two cycles.%采用(火用)效率与炯损失分析方法,计算比较了电压缩式制冷循环与单效吸收式制冷循环的(火用)效率及两种制冷循环在典型工况下各环节的(火用)损失.结果表明,当采用合适的发生器温度和热源温度时,两种制冷循环的(火用)效率基本相同;电压缩式制冷循环的主要(火用)损失发生在压缩机环节,吸收式制冷循环的主要(火用)损失发生在吸收器和发生器.讨论了两种制冷循环的改进途径.

  11. Evaluation of non-azeotropic mixtures containing HFOs as potential refrigerants in refrigeration and high-temperature heat pump systems

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    With the increasing environmental concern on global warming, hydrofluoro-olefin (HFOs), possessing low GWP, has attracted great attention of many researchers recently. In this study, non-azeotropic mixtures composed of HFOs (HFO-1234yf, HFO-1234ze(z), HFO-1234ze(e) and HFO-1234zf) are developed to substitute for HFC-134a and CFC-114 in air-conditioning and high-temperature heat pump systems, respectively. The cycle performances were evaluated by an improved theoretical cy-cle evaluation methodology. The results showed that all the mixtures proposed herein were favorable refrigerants with excel-lent thermodynamic cycle performances. M1A presented lower discharge temperature and pressure ratio and higher COPc than that of HFC-134a. The volumetric cooling capacity was similar to HFC-134a. It can be served as a good environmentally friendly alternative to replace HFC-134a. M3H delivered similar discharge temperature as CFC-114 did. And the COPh was 3% higher. It exhibits excellent cycle performance in high-temperature heat pump and is a promising refrigerant to substitute for CFC-114. And the gliding temperature differences enable them to exhibit better coefficient of performance by matching the sink/source temperature in practice. Because the toxicity, flammability and other properties are not investigated in detail, ex-tensive toxicity and flammability testing needs to be conducted before they are used in a particular application.

  12. Analysis of synchronization in a supermarket refrigeration system

    DEFF Research Database (Denmark)

    Wisniewski, Rafal; Leth, John-Josef; Rasmussen, Jakob Gulddahl

    2014-01-01

    In a supermarket refrigeration, the temperature in a display case, surprisingly, influences the temperature in other display cases. This leads to a synchronous operation of all display cases, in which the expansion valves in the display cases turn on and off at exactly the same time. This behavio...

  13. Development of Magnetic Refrigerator

    Science.gov (United States)

    Ogiwara, Hiroyasu; Nakagome, Hideki; Kuriyama, Tohru

    A series of R & D of magnetic refrigerators has been done in order to realize an advanced type cryocooler for superconducting magnets of maglev trains and MRI medical system. As a result of efforts on both the magnetic refrigerator and superconducting magnets, a parasitic type magnetic refrigeration system was proposed.

  14. Overview of Air Liquide refrigeration systems between 1.8 K and 200 K

    Energy Technology Data Exchange (ETDEWEB)

    Gondrand, C.; Durand, F.; Delcayre, F.; Crispel, S. [AL-AT, 2 rue de Clémencières, 38360 Sassenage (France); Baguer, G. M. Gistau [CRYOGUY, 44, chemin de la Buisse, 38330 Biviers (France)

    2014-01-29

    Cryogenic refrigeration systems are necessary for numerous applications. Gas purification and distillation require temperatures between 15 K and 200 K depending on the application, space simulation chambers down to 15 K, superconductivity between 1.8 K and up to 75 K (magnets, cavities or HTS devices like cables, FCL, SMES, etc), Cold Neutron Sources between 15 and 20 K, etc. Air Liquide Advanced Technologies is designing and manufacturing refrigerators since 60 years to satisfy those needs. The step by step developments achieved have led to machines with higher efficiency and reliability. In 1965, reciprocating compressors and Joule Thomson expansion valves were used. In 1969, centripetal expanders began to be used. In 1980, oil lubricated screw compressors took the place of reciprocating compressors and a standard range of Claude cycle refrigerators was developed: the HELIAL series. 1980 was also the time for cryogenic centrifugal compressor development. In 2011, driven by the need for lower operational cost (high efficiency and low maintenance), cycle oil free centrifugal compressors on magnetic bearings were introduced instead of screw compressors. The power extracted by centripetal expanders was recovered. Based on this technology, a range of Turbo-Brayton refrigerators has been designed for temperatures between 40 K and 150 K. On-going development will enable widening the range of Turbo-Brayton refrigerators to cryogenic temperatures down to 15 K.. Cryogenic centrifugal circulators have been developed in order to answer to an increasing demand of 4 K refrigerators able to distribute cold power.

  15. Overview of Air Liquide refrigeration systems between 1.8 K and 200 K

    Science.gov (United States)

    Gondrand, C.; Durand, F.; Delcayre, F.; Crispel, S.; Baguer, G. M. Gistau

    2014-01-01

    Cryogenic refrigeration systems are necessary for numerous applications. Gas purification and distillation require temperatures between 15 K and 200 K depending on the application, space simulation chambers down to 15 K, superconductivity between 1.8 K and up to 75 K (magnets, cavities or HTS devices like cables, FCL, SMES, etc), Cold Neutron Sources between 15 and 20 K, etc. Air Liquide Advanced Technologies is designing and manufacturing refrigerators since 60 years to satisfy those needs. The step by step developments achieved have led to machines with higher efficiency and reliability. In 1965, reciprocating compressors and Joule Thomson expansion valves were used. In 1969, centripetal expanders began to be used. In 1980, oil lubricated screw compressors took the place of reciprocating compressors and a standard range of Claude cycle refrigerators was developed: the HELIAL series. 1980 was also the time for cryogenic centrifugal compressor development. In 2011, driven by the need for lower operational cost (high efficiency and low maintenance), cycle oil free centrifugal compressors on magnetic bearings were introduced instead of screw compressors. The power extracted by centripetal expanders was recovered. Based on this technology, a range of Turbo-Brayton refrigerators has been designed for temperatures between 40 K and 150 K. On-going development will enable widening the range of Turbo-Brayton refrigerators to cryogenic temperatures down to 15 K.. Cryogenic centrifugal circulators have been developed in order to answer to an increasing demand of 4 K refrigerators able to distribute cold power.

  16. Measurement and research on improving the performance of dual-temperature refrigerator system

    Science.gov (United States)

    Jwo, Ching-Song; Lin, Ming-Wei; Lin, Chien-Yu; Hsu, Ching-Wei; Chen, Sih-Li

    2010-08-01

    This study presents a "cold-stored liquid-vapor heat exchanger" to improve the performance of dual-temperature refrigerator system, for the installation of "cold-stored liquid-vapor heat exchanger" to measure the improving the performance of system. The study designs four different experimental models for making analytical discussion, and these models include: Model-A, dual-temperature refrigerator system (control group); Model-B, electronic expansion valve, which replaces mechanical evaporating pressure regulating valve; Model-C, dual-temperature refrigerator system equipped with a "traditional liquid heat exchanger" and Model-D, dual-temperature refrigerator system equipped with an "cold-stored liquid-vapor heat exchanger" developed by the study. As known from analysis of the experimental data, under the operation of Model-B, the overheating situation at the return conduit of medium-temperature evaporator can be effectively controlled. Furthermore, the model can enhance the refrigeration speed, and improve the problems of accumulation of refrigerator oil as well as the shutdown and instability of pump appeared in traditional evaporating pressure regulating valve. After making analysis and comparison under the operation of Model-C, the COP of dual-temperature refrigerator is found improved by around 21.7%. When experimental analysis and comparison are made under the operation of Model-D, it is found that air-cooled liquid-gas heat exchanger can effectively provide better overcooling degree, and this device can improve the exhaust of compressor and excessively high temperature of machine shell. Eventually, the overall COP can be effectively improved by around 29.5%.

  17. Data Mining Approcah for Performance Analysis of Variable Speed Refrigeration System

    Directory of Open Access Journals (Sweden)

    Önder KIZILKAN

    2015-02-01

    Full Text Available The aim of this study is to carry out performance modeling of an experimental refrigeration system driven by variable speed compressor using Data Mining techniques with small data sets. In order to vary the capacity of the refrigeration systems, one of the best methods is controlling the rotational speed of the compressor motor with a frequency inverter. For this aim, an experimental refrigeration system is setup with a frequency inverter for controlling the speed of compressor electric motor. The experiments are made for 35 Hz to 50 Hz electric motor frequencies. Data mining technique is applied to determine the system performance parameters using actual data obtained from the measurements. From the results, it is observed that data mining procedure is suitable for forecasting the system characteristics for different compressor frequencies and cooling loads instead of making several experiments

  18. Theoretical Study on CO2 Transcritical Cycle Combined Ejector Cycle Refrigeration System

    Institute of Scientific and Technical Information of China (English)

    卢苇; 马一太; 李敏霞; 查世彤

    2003-01-01

    Chlorofluorocarbons(CFCs) or hydrochlorofluorocarbons(HCFCs) are as main refrigerants used in traditional refrigeration systems driven by electricity from burning fossil fuels, which is regarded as one of the major reasons for ozone depletion (man-made refrigerants emission) and global warming (CO2 emission). So people pay more and more attention to natural refrigerants and energy saving technologies. An innovative system combining CO2 transcritical cycle with ejector cycle is proposed in this paper. The CO2 compression sub-cycle is powered by electricity with the characteristics of relatively high temperature in the gas cooler (defined as an intercooler by the proposed system). In order to recover the waste heat, an ejector sub-cycle operating with the natural refrigerants (NH3, H2O) is employed. The two sub-cycles are connected by an intercooler. This combined cycle joins the advantages of the two cycles together and eliminates the disadvantages. The influences of the evaporation temperature in CO2 compression sub-cycle, the evaporation temperature in the ejector sub-cycle, the temperature in the intercooler and the condensation temperature in the proposed system performance are discussed theoretically in this study. In addition, some unique features of the system are presented.

  19. Advanced Supermarket Refrigeration - Heat Recovery Systems. Annex 26. Final report. Volume 2. Country reports

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-04-01

    Annex 26 has produced three deliverables: (1) Workshop (October 2000) proceedings Stockholm, Sweden, on CD-ROM (HPP-AN26-1); (2) Final report, Volume 1, Executive Summary, as report (HPP-AN26-2); and (3) Final report, Volume 2, Country reports (described in this record). Each of these reports, available from the HPC, provide valuable information for practitioners (designers, installers) and manufacturers of supermarket refrigeration systems. Annex 26 is the first international project under the IEA Heat Pump Programme that links refrigeration and heat pump technology. Recovering heat from advanced supermarket refrigeration systems for space and water heating purposes seems obvious and is beneficial for owners and operators. Because there are world-wide a great number of supermarkets that offer frozen and chilled food and further growth of this sector may be expected, the amount of energy used for refrigeration is enormous and will likely increase substantially in the near future. Annex 26 analysed several advanced supermarket refrigeration systems and came to remarkable conclusions as far as energy conservation and TEWI reduction is concerned. The conclusions justify that advanced supermarket systems with heat recovery should receive great attention and support. And there is still further research needed in several areas. The Annex also included a thorough system cost analyses and proposals for cost reductions are given.

  20. Advanced Supermarket Refrigeration - Heat Recovery Systems. Annex 26. Final report. Volume 1. Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, Van D. (ed.) [Oak Ridge National Laboratory ORNL, Oak Ridge, TN (United States)

    2003-04-01

    Annex 26 has produced three deliverables: (1) Workshop (October 2000) proceedings Stockholm, Sweden, on CD-ROM (HPP-AN26-1); (2) Final report, described in this record; and (3) Final report, Volume 2, Country reports, on CD-ROM (HPP-AN26-3). Each of these reports, available from the HPC, provide valuable information for practitioners (designers, installers) and manufacturers of supermarket refrigeration systems. Annex 26 is the first international project under the IEA Heat Pump Programme that links refrigeration and heat pump technology. Recovering heat from advanced supermarket refrigeration systems for space and water heating purposes seems obvious and is beneficial for owners and operators. Because there are world-wide a great number of supermarkets that offer frozen and chilled food and further growth of this sector may be expected, the amount of energy used for refrigeration is enormous and will likely increase substantially in the near future. Annex 26 analysed several advanced supermarket refrigeration systems and came to remarkable conclusions as far as energy conservation and TEWI reduction is concerned. The conclusions justify that advanced supermarket systems with heat recovery should receive great attention and support. And there is still further research needed in several areas. The Annex also included a thorough system cost analyses and proposals for cost reductions are given.

  1. Thermodynamic analysis of transcritical CO{sub 2} booster refrigeration systems in supermarket

    Energy Technology Data Exchange (ETDEWEB)

    Ge, Y.T., E-mail: yunting.ge@brunel.ac.u [Mechanical Engineering, School of Engineering and Design, Brunel University, Uxbridge, Middlesex UB8 3PH (United Kingdom); Tassou, S.A. [Mechanical Engineering, School of Engineering and Design, Brunel University, Uxbridge, Middlesex UB8 3PH (United Kingdom)

    2011-04-15

    Research highlights: {yields} The CO{sub 2} booster systems are widely applied in supermarket refrigeration. {yields} Control optimisation can improve the performance of the CO{sub 2} refrigeration systems. {yields} The effects of some important parameters on the system performance are examined. {yields} The optimal high-side pressure in the transcritical cycles is established and derived. -- Abstract: Due to less environmental impact, the CO{sub 2} booster refrigeration system has been widely applied in the modern supermarket as a substitute for the conventional R404A multiplex system. However, the performance efficiency of the CO{sub 2} system still requires further improvement in order to save energy; thus, one of the most efficient techniques would be to investigate and employ the optimal controls for refrigerant high side pressures at various operating states. In this paper, the possible parameters affecting system efficiency of the CO{sub 2} system in the transcritical cycle at a higher ambient air temperature are identified through thermodynamic analysis, but cannot be quantified mathematically because of the high non-linearity involved. Instead, sensitive analysis of the system by means of the thermodynamic model is used to examine the effects of parameters including high side refrigerant pressure, ambient air temperature, refrigerant intermediate pressure, and medium and low evaporating temperatures, superheating, effectiveness of suction line heat exchanger, and compressor efficiency on system performance. Consequently, the optimal high side pressure in the transcritical cycle is established and derived as a function of three important parameters consisting of ambient air temperature, the effectiveness of suction line heat exchanger and compressor efficiency. In addition, optimal operating parameters such as the intermediate pressure are also proposed to improve the system performance.

  2. From Consumption to Prosumption - Operational Cost Optimization for Refrigeration System With Heat Waste Recovery

    DEFF Research Database (Denmark)

    Minko, Tomasz; Garcia, Jesus Lago; Bendtsen, Jan Dimon;

    2017-01-01

    Implementation of liquid cooling transforms a refrigeration system into a combined cooling and heating system. Reclaimed heat can be used for building heating purposes or can be sold. Carbon dioxide based refrigeration systems are considered to have a particularly high potential for becoming ecient...... heat energy producers. In this paper a CO2 system that operates in the subcritical region is examined. Modelling approach is presented, and used for operation optimisation by way of non-linear model predictive control techniques. Assuming that the heat is sold when using both objective functions...

  3. Experimental investigation of static ice refrigeration air conditioning system driven by distributed photovoltaic energy system

    Science.gov (United States)

    Xu, Y. F.; Li, M.; Luo, X.; Wang, Y. F.; Yu, Q. F.; Hassanien, R. H. E.

    2016-08-01

    The static ice refrigeration air conditioning system (SIRACS) driven by distributed photovoltaic energy system (DPES) was proposed and the test experiment have been investigated in this paper. Results revealed that system energy utilization efficiency is low because energy losses were high in ice making process of ice slide maker. So the immersed evaporator and co-integrated exchanger were suggested in system structure optimization analysis and the system COP was improved nearly 40%. At the same time, we have researched that ice thickness and ice super-cooled temperature changed along with time and the relationship between system COP and ice thickness was obtained.

  4. Thermodynamic, Environmental and Economic Analyses of Solar Ejector Refrigeration System Application for Cold Storage

    Directory of Open Access Journals (Sweden)

    İbrahim ÜÇGÜL

    2009-02-01

    Full Text Available The refrigeration processes have been widely applied for especially in cold storages. In these plants, the systems working with compressed vapour cooling cycles have been used as a classical method. In general, electrical energy is used for compressing in these processes. Although, mainly the electricity itself has no pollution effect on the environment, the fossil fuels that are widely used to produce electricity in the most of the world, affect the nature terribly. In short, these refrigeration plants, because of the source of the electricity pollute the nature indirectly. However, for compression an ejector refrigeration system requires one of the important renewable energy sources with negligible pollution impact on the environment, namely solar energy from a thermal source. Thermodynamical, environmental and economical aspects of the ejector refrigeration system working with solar energy was investigated in this study. As a pilot case, apple cold storage plants widely used in ISPARTA city, which 1/5 th of apple production of TURKEY has been provided from, was chosen. Enviromental and economical advantages of solar ejector refrigeration system application for cold storage dictated by thermodynamic, economic and enviromental analyses in this research.

  5. CFD modelling and experimental investigation of an ejector refrigeration system using methanol as the working fluid

    Energy Technology Data Exchange (ETDEWEB)

    Riffat, S.B.; Omer, S.A. [Nottingham Univ., School of the Built Environment, Nottingham (United Kingdom)

    2001-07-01

    This paper presents results of computational fluid dynamic (CFD) analysis and experimental investigation of an ejector refrigeration system using methanol as the working fluid. The CFD modelling was used to investigate the effect of the relative position of the primary nozzle exit within the mixing chamber on the performance of the ejector. The results of the CFD were used to obtain the optimum geometry of the ejector, which was then used to design, construct and test a small-scale experimental ejector refrigeration system. Methanol was used as the working fluid, as it has the advantage of being an 'environmentally friendly' refrigerant that does not contribute to global warming and ozone layer depletion. In addition, use of methanol allows the ejector refrigeration system to produce cooling at temperatures below the freezing point of the water, which of course would not be possible with a water ejector refrigeration system. CFD results showed that positioning the nozzle exit at least 0.21 length of the mixing chamber throat's diameter upstream of the entrance of the mixing chamber gave better performance than pushing it into the mixing chamber. Experimental values of coefficient of performance (COP) between 0.2 and 0.4 were obtained at operating conditions achievable using low-grade heat such as solar energy and waste heat. (Author)

  6. Thermodynamic analysis of hydrocarbon refrigerants-based ethylene BOG re-liquefaction system

    Science.gov (United States)

    Beladjine, Boumedienne M.; Ouadha, Ahmed; Addad, Yacine

    2016-09-01

    The present study aims to make a thermodynamic analysis of an ethylene cascade re-liquefaction system that consists of the following two subsystems: a liquefaction cycle using ethylene as the working fluid and a refrigeration cycle operating with a hydrocarbon refrigerant. The hydrocarbon refrigerants considered are propane (R290), butane (R600), isobutane (R600a), and propylene (R1270). A computer program written in FORTRAN is developed to compute parameters for characteristic points of the cycles and the system's performance, which is determined and analyzed using numerical solutions for the refrigerant condensation temperature, temperature in tank, and temperature difference in the cascade condenser. Results show that R600a gives the best performance, followed by (in order) R600, R290, and R1270. Furthermore, it is found that an increase in tank temperature improves system performance but that an increase in refrigerant condensation temperature causes deterioration. In addition, it is found that running the system at a low temperature difference in the cascade condenser is advantageous.

  7. Potential of the tractor-trailer and container segments as entry markets for a proposed refrigeration technology

    Energy Technology Data Exchange (ETDEWEB)

    Smith, S.A.; Davis, L.J.; Garrett, B.A.

    1987-05-01

    The refrigerated trailer and container segments of the transportation industry are evaluated as potential entry markets for a proposed absorption refrigeration technology. To perform this analysis the existing transportation refrigeration industry is characterized; this includes a description of the current refrigeration technology, rating systems, equipment manufacturers, maintenance requirements, and sales trends. This information indicates that the current transportation refrigeration industry is composed of two major competitors, Thermo King and Carrier. In addition, it has low profit potential, some barriers to entry and low growth potential. Data are also presented that characterize the transportation refrigeration consumers, specifically, major groups, market segmentation, consumer decision process, and buying criteria. This consumer information indicates that the majority of refrigerated trailer consumers are private carriers, and that the majority of refrigerated container consumers are shipping companies. Also, these consumers are primarily interested in buying reliable equipment at a low price, and are quite satisfied with existing refrigeration equipment.

  8. Risks in the physical recovery system of waste refrigerator cabinets and the controlling measure.

    Science.gov (United States)

    Ruan, Jujun; Xue, Mianqiang; Xu, Zhenming

    2012-12-18

    Environmental information in physical recovery system of waste refrigerator cabinets was provided in this paper. The system included closed shearing, activated carbon adsorption (ACA), air current separation, magnetic separation, and eddy current separation. Exposures of CFC-11, heavy metals, and noise emitted from the system were assessed. Abundant CFC-11 (>510 mg/m³) was detected in crusher cavity. However, due to the employment of ACA, little CFC-11 (refrigerator cabinets on environmental protection. Meanwhile, it contributed to the knowledge of environmental information of physical technology for recovering e-waste.

  9. Energy and environmental performance assessment of R744 booster supermarket refrigeration systems operating in warm climates

    DEFF Research Database (Denmark)

    Gullo, Paride; Elmegaard, Brian; Cortella, Giovanni

    2016-01-01

    This paper presents a theoretical comparison among different commercial refrigeration systems in terms of annual energy consumption and environmental impact. Eight configurations were studied: a R744/R134a cascade refrigeration system (baseline), a conventional and an improved R744 booster system...... as on the running modes of a conventional European supermarket. A transition zone, which occurred between sub critical and transcritical operations, was adopted.The results showed that all the enhanced configurations may achieve a comparable energy saving to the one of the baseline in both the selected locations...

  10. Thermodynamic Analysis of Hydrocarbon Refrigerants-Based Ethylene BOG Re-liquefaction System

    Institute of Scientific and Technical Information of China (English)

    Boumedienne M Beladjine; Ahmed Ouadha; and Yacine Addad

    2016-01-01

    The present study aims to make a thermodynamic analysis of an ethylene cascade re-liquefaction system that consists of the following two subsystems: a liquefaction cycle using ethylene as the working fluid and a refrigeration cycle operating with a hydrocarbon refrigerant. The hydrocarbon refrigerants considered are propane (R290), butane (R600), isobutane (R600a), and propylene (R1270). A computer program written in FORTRAN is developed to compute parameters for characteristic points of the cycles and the system’s performance, which is determined and analyzed using numerical solutions for the refrigerant condensation temperature, temperature in tank, and temperature difference in the cascade condenser. Results show that R600a gives the best performance, followed by (in order) R600, R290, and R1270. Furthermore, it is found that an increase in tank temperature improves system performance but that an increase in refrigerant condensation temperature causes deterioration. In addition, it is found that running the system at a low temperature difference in the cascade condenser is advantageous.

  11. The control system of the ecological hybrid two stages refrigerating cycle

    Directory of Open Access Journals (Sweden)

    Cyklis Piotr

    2016-01-01

    Full Text Available The compression anticlockwise cycle is mostly used for refrigeration. However due to the environmental regulations, the use of classic refrigerants: F-gases is limited by international agreements. Therefore the combined compression-adsorption hybrid cycle with natural liquids: water/carbon dioxide working as the energy carriers is a promising solution. This allows to utilize the solar or waste energy for the refrigeration purpose. In this paper application of the solar collectors as the energy source for the adsorption cycle, coupled with the low temperature (LT refrigerating carbon dioxide compression cycle is shown. The control of the system is an essential issue to reduce the electric power consumption. The control of the solar heat supply and water sprayed cooling tower, for the adsorption cycle re-cooling, is presented in this paper. The designed control system and algorithm is related to the LT compression cycle, which operates according to the need of cold for the refrigeration chamber. The results of the laboratory investigations of the full system, showing the reduction of the energy consumption and maximum utilization of the solar heat for different control methods are presented.

  12. Selecting compressor-type refrigeration systems for air conditioning plants. Decision criteria. Auswahl von Kompressionskaeltesystemen fuer Klimaanlagen. Entscheidungskriterien

    Energy Technology Data Exchange (ETDEWEB)

    Jacobowsky, H. (YORK International GmbH, Mannheim (Germany))

    1999-03-01

    The economic efficiency of compression-type refrigerating systems has continuously improved in recent years. All constructional elements have meanwhile been adapted to the physical properties of the alternative refrigerants. These developments are aimed at improving the coefficient of performance, reducing leakage, and optimising investment costs. The market is showing a distinct trend towards alternative refrigerants R 134a, R 407C, and NH[sub 3].

  13. The importance of the ammonia purification process in ammonia-water absorption systems

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Seara, Jose [Area de Maquinas y Motores Termicos, Escuela Tecnica Superior de Ingenieros Industriales, Universidad de Vigo, Campus Lagoas-Marcosende No. 9, 36200 Vigo (Spain)]. E-mail: jseara@uvigo.es; Sieres, Jaime [Area de Maquinas y Motores Termicos, Escuela Tecnica Superior de Ingenieros Industriales, Universidad de Vigo, Campus Lagoas-Marcosende No. 9, 36200 Vigo (Spain)

    2006-08-15

    Practical experience in working with ammonia-water absorption systems shows that the ammonia purification process is a crucial issue in order to obtain an efficient and reliable system. In this paper, the detrimental effects of the residual water content in the vapour refrigerant are described and quantified based on the system design variables that determine the effectiveness of the purification process. The study has been performed considering a single stage system with a distillation column with complete condensation. The ammonia purification effectiveness of the column is analysed in terms of the efficiencies in the stripping and rectifying sections and the reflux ratio. By varying the efficiencies from 0 to 1, systems with neither the rectifying nor stripping section, with either the rectifying or stripping section, or with both sections can be considered. The impact of the ammonia purification process on the absorption system performance is studied based on the column efficiencies and reflux ratio; and its effects on refrigerant concentration, system COP, system pressures and main system mass flow rates and concentrations are analysed. When the highest efficiency rectifying sections are used a combination of generation temperature and reflux ratio which leads to optimum COP values is found. The analysis covers different operating conditions with air and water cooled systems from refrigeration to air conditioning applications by changing the evaporation temperature. The importance of rectification in each kind of application is evaluated.

  14. Model-Based Predictive Control Scheme for Cost Optimization and Balancing Services for Supermarket Refrigeration Systems

    DEFF Research Database (Denmark)

    Weerts, Hermanus H. M.; Shafiei, Seyed Ehsan; Stoustrup, Jakob

    2014-01-01

    A new formulation of model predictive control for supermarket refrigeration systems is proposed to facilitate the regulatory power services as well as energy cost optimization of such systems in the smart grid. Nonlinear dynamics existed in large-scale refrigeration plants challenges the predictive...... control design. It is however shown that taking into account the knowledge of different time scales in the dynamical subsystems makes possible a linear formulation of a centralized predictive controller. A realistic scenario of regulatory power services in the smart grid is considered and formulated...

  15. On the Trade-off between Energy Consumption and Food Quality Loss in Supermarket Refrigeration Systems

    DEFF Research Database (Denmark)

    Cai, Junping; Jensen, Jørgen Bauck; Skogestad, Sigurd

    2008-01-01

    This paper studies the trade-off between energy consumption and food quality loss, at varying ambient conditions, in supermarket refrigeration systems. Compared with the traditional operation with pressure control, a large potential for energy savings without extra loss of food quality is demonst......This paper studies the trade-off between energy consumption and food quality loss, at varying ambient conditions, in supermarket refrigeration systems. Compared with the traditional operation with pressure control, a large potential for energy savings without extra loss of food quality...

  16. Quantum refrigeration cycles using spin-1/2 systems as the working substance.

    Science.gov (United States)

    He, Jizhou; Chen, Jincan; Hua, Ben

    2002-03-01

    The cycle model of a quantum refrigerator composed of two isothermal and two isomagnetic field processes is established. The working substance in the cycle consists of many noninteracting spin-1/2 systems. The performance of the cycle is investigated, based on the quantum master equation and semigroup approach. The general expressions of several important performance parameters, such as the coefficient of performance, cooling rate, and power input, are given. Especially, the case at high temperatures is analyzed in detail. The results obtained are further generalized and discussed, so that they may be directly used to describe the performance of the quantum refrigerator using spin-J systems as the working substance. Finally, the optimum characteristics of the quantum Carnot refrigerator are derived simply.

  17. Model Identification for Control of Display Units in Supermarket Refrigeration Systems

    DEFF Research Database (Denmark)

    O'Connell, Niamh; Madsen, Henrik; Andersen, Philip Hvidthøft Delff;

    in a supermarket refrigeration system. The grey-box modelling approach is adopted, using stochastic differential equations to define the dynamics of the model, combining prior knowledge of the physical system with data-driven modelling. Model identification is performed using the forward selection method...

  18. Adapting CHP Software to suit the modelling of heat pump and refrigeration systems

    NARCIS (Netherlands)

    Verschoor, M.J.E.

    1998-01-01

    The role of heat pumps and refrigeration machines as integrated parts of energy supply systems is increasing as a result of the search for systems which supply the desired amounts and types of energy in an energy-efficient manner. Tools to support engineers in designing, analysing and optimising suc

  19. Foaming in refrigerant lubricant systems; Schaumbildung in Kaeltemittel/Oel-Systemen

    Energy Technology Data Exchange (ETDEWEB)

    Dischner, M.; Junk, M.; Schenk, J. [ILK Institut fuer Luft- und Kaeltetechnik gGmbH, Dresden (Germany)

    2007-04-15

    The foaming behaviour of different refrigerant - lubricant systems was tested systematically with experiments by use of a special laboratory equipment. The efficiency of antifoam additives was investigated for systems with intensive foaming effects. These additives had no negative influence to the load capacity of the lubricating film. (orig.)

  20. Rebuilding a refrigerating system in an ice- and sports centre; Ombygging av kuldeanlegg ved Leangen is- og idrettsanlegg

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Svenn Arne; Saeheim, Ole Ivar

    2000-07-01

    In 1994 the outdoor racing track of Leangen ice- and sports centre in Norway was leaking tonnes of freon into the open air. As discussed in this article, the refrigerating system was successfully rebuilt to use indirect refrigeration with brine as refrigerant. One would expect the plant to lose some performance because of the indirect refrigeration due to the lower evaporation temperature. But this is not the case; the evaporation temperature and the performance remain about the same as before. The steel pipes are corrosion protected by the addition of inhibitors to the brine. The ice quality has improved.

  1. Effect of refrigerant mal-distribution in fin-and-tube evaporators on system performance

    DEFF Research Database (Denmark)

    Kærn, Martin Ryhl; Elmegaard, Brian; Larsen, Lars Finn Sloth

    2009-01-01

    Refrigerant mal-distribution in fin-and-tube evaporators for residential air-conditioning (RAC) is investigated numerically in this paper. A model of the system is developed in the object-oriented modeling language Modelica. Themodels of the compressor and expansion valve are static, whereas...... straight tubes. The refrigerant mal-distribution is then induced to the evaporator by varying the vapor quality at the inlet to each feeder tube, the pressure drop through each feeder tube and the air-flow across each tube. Finally it is shown that air-flow mal-distribution can be compensated...... by an intelligent distributor, that ensures equal superheat in both tubes. The refrigerant is R410a....

  2. Numerical modelling and analysis of a room temperature magnetic refrigeration system

    DEFF Research Database (Denmark)

    Petersen, Thomas Frank

    . The AMR performs a cyclic process, and to simulate the AMR refrigeration cycle the model starts from an initial temperature distribution in the regenerator and fluid channel and takes time steps forward in time until the cyclical steady-state is obtained. The model can therefore be used to study both......This thesis presents a two-dimensional mathematical model of an Active Magnetic Regenerator (AMR) system which is used for magnetic refrigeration at room temperature. The purpose of the model is to simulate a laboratory-scale AMR constructed at Risø National Laboratory. The AMR model geometry...... transient and steady-state phenomena. The AMR performance can be evaluated in terms of the no-load temperature span as well as the refrigeration capacity and the COP. The AMR model was verified extensively and it was concluded that the model has energy conservation and that the solution is independent...

  3. Mini-channel evaporator/heat pipe assembly for a chip cooling vapor compression refrigeration system

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Guilherme B.; Barbosa, Jader R. Jr.; Prata, Alvaro T. [Polo - Research Laboratories for Emerging Technologies in Cooling and Thermophysics, Department of Mechanical Engineering, Campus Universitario, Trindade, Federal University of Santa Catarina, Florianopolis, SC 88040900 (Brazil)

    2010-11-15

    We investigate a novel evaporator design for a small-scale refrigeration system whose function is to assist the existing heat pipe technology currently used in chip cooling of portable computers. A heat transfer model for the evaporator/heat pipe assembly was devised specifically for sizing the evaporator in order to keep the chip surface temperature below a certain value. A prototype was tested with R-600a at saturation temperatures of 45 and 55 C, mass flow rates between 0.5 and 1.5 kg h{sup -1} and heat transfer rates between 30 and 60 W. The experimental results demonstrated that the average refrigerant-side heat transfer coefficient is more sensitive to a change in the refrigerant mass flux than to changes in the saturation temperature and heat transfer rate. The agreement between the calculated heat transfer coefficient and the data was within {+-}10% for the conditions evaluated. (author)

  4. Artificial neural network analysis of a refrigeration system with an evaporative condenser

    Energy Technology Data Exchange (ETDEWEB)

    Ertunc, H.M. [Department of Mechatronics Engineering, Kocaeli University, 41040 Kocaeli (Turkey); Hosoz, M. [Department of Mechanical Education, Kocaeli University, 41380 Kocaeli (Turkey)

    2006-04-01

    This paper describes an application of artificial neural networks (ANNs) to predict the performance of a refrigeration system with an evaporative condenser. In order to gather data for training and testing the proposed ANN, an experimental refrigeration system with an evaporative condenser was set up. Then, steady-state test runs were conducted varying the evaporator load, air and water flow rates passing through the condenser and both dry and wet bulb temperatures of the air stream entering the condenser. Utilizing some of the experimental data, an ANN model for the system based on standard backpropagation algorithm was developed. The ANN was used for predicting various performance parameters of the system, namely the condenser heat rejection rate, refrigerant mass flow rate, compressor power, electric power input to the compressor motor and the coefficient of performance. The ANN predictions usually agree well with the experimental values with correlation coefficients in the range of 0.933-1.000, mean relative errors in the range of 1.90-4.18% and very low root mean square errors. Results show that refrigeration systems, even complex ones involving concurrent heat and mass transfer such as systems with an evaporative condenser, can alternatively be modelled using ANNs within a high degree of accuracy. [Author].

  5. Numerical model for thermoeconomic diagnosis in commercial transcritical/subcritical booster refrigeration systems

    DEFF Research Database (Denmark)

    Ommen, Torben; Elmegaard, Brian

    2012-01-01

    , and environmental, interest. A general solution for evaluation of these systems is considered, with the objective to reduce cost and power consumption of malfunctioning equipment in operation. An analysis of the use of thermoeconomic diagnosis methods is required, as these methods may prove applicable....... To accommodate the analysis, a numerical model of a transcritical booster refrigeration plant is considered in this paper. Additionally the characteristic curves method is applied to the high pressure compressor unit of the refrigeration plant. The approach successfully determine whether an anomaly is intrinsic...

  6. Model Predictive Control of Hybrid Thermal Energy Systems in Transport Refrigeration

    DEFF Research Database (Denmark)

    Shafiei, Seyed Ehsan; Alleyne, Andrew

    2015-01-01

    A predictive control scheme is designed to control a transport refrigeration system, such as a delivery truck, that includes a vapor compression cycle configured in parallel with a thermal energy storage (TES) unit. A novel approach to TES utilization is introduced and is based on the current...

  7. Advanced exergy analysis of a R744 booster refrigeration system with parallel compression

    DEFF Research Database (Denmark)

    Gullo, Paride; Elmegaard, Brian; Cortella, Giovanni

    2016-01-01

    In this paper, the advanced exergy analysis was applied to a R744 booster refrigeration system with parallel compression taking into account the design external temperatures of 25 degrees C and 35 degrees C, as well as the operating conditions of a conventional European supermarket. The global...

  8. Experimental and performance study of the compact solar absorption air-conditioner system with thermosiphon solution elevation pump

    Energy Technology Data Exchange (ETDEWEB)

    Cong Lin; Zheng Hongfei; Tao Tao [Beijing Inst. of Tech., BJ (China); Li Zhengliang [Guangxi Teacher Coll., Nanning, GX (China)

    2008-07-01

    A new type LiBr adsorption solar air-condition system with thermosiphon solution elevation pump is designed, whose evaporator and absorption tanks are combined in a circularity, which makes the chill part very compact. On the basis of theoretical arithmetic, the comprehensive heat transfer coefficient on the evaporator side and the theoretical refrigerating capacity are got theoretically. By experimental study, some useful performance curves are got, which is significant for optimal design and improvement. The refrigerating capacity of the system can be got to be 2.14kW. (orig.)

  9. Development of a metal hydride refrigeration system as an exhaust gas-driven automobile air conditioner

    Energy Technology Data Exchange (ETDEWEB)

    Qin, Feng; Chen, Jiangping; Chen, Zhijiu [Institute of Refrigeration and Cryogenics Engineering, Shanghai Jiaotong University, Shanghai 200030 (China); Lu, Manqi; Yang, Ke [Engineering Center, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, Liaoning Province 110016 (China); Zhou, Yimin [Research Center, Zhejiang Yinlun Machinery Co. Ltd., Tiantai County, Zhejiang Province 317200 (China)

    2007-10-15

    Aiming at developing exhaust gas-driven automobile air conditioners, two types of systems varying in heat carriers were preliminarily designed. A new hydride pair LaNi{sub 4.61}Mn{sub 0.26}Al{sub 0.13}/La{sub 0.6}Y{sub 0.4}Ni{sub 4.8}Mn{sub 0.2} was developed working at 120-200 C/20-50 C/-10-0 C. P-C isotherms and reaction kinetics were tested. Reaction enthalpy, entropy and theoretical cycling coefficient of performance (COP) were deducted from Van't-Hoff diagram. Test results showed that the hydride pair has flat plateau slopes, fast reaction dynamics and small hystereses; the reaction enthalpy of the refrigeration hydride is -27.1 kJ/mol H{sub 2} and system theoretical COP is 0.711. Mean particle sizes during cycles were verified to be an intrinsic property affected by constitution, heat treatment and cycle numbers rather than initial grain sizes. Based on this work pair, cylindrical reactors were designed and a function proving metal hydride intermittent refrigeration system was constructed with heat conducting oil as heat source and water as heat sink. The reactor equivalent thermal conductivity is merely 1.3 W/(m K), which still has not meet practical requirement. Intermittent refrigeration cycles were achieved and the average cooling power is 84.6 W at 150 C/30 C/0 C with COP being 0.26. The regulations of cycling performance and minimum refrigeration temperature (MRT) were determined by altering heat source temperature. Results showed that cooling power and system COP increase while MRT decreases with the growth of heat source temperature. This study develops a new hydride pair and confirms its application in automobile refrigeration systems, while their heat transfer properties still need to be improved for better performance. (author)

  10. Utilization of process energy from supermarket refrigeration systems. Coupling of cooling and heating; Prozessenergienutzung von Supermarktkaelteanlagen. Kaelte-Waerme-Kopplung

    Energy Technology Data Exchange (ETDEWEB)

    Wirsching, Alexander [TEKO Gesellschaft fuer Kaeltetechnik mbH, Altenstadt (Germany). Technologie und Kommunikation

    2010-03-15

    The efficiency is defined as the relation between utility and expenditure. Thus, it is obvious for the specialist of refrigeration to tackle with the expenditure (energy consumption) since the utilization conventionally is defined as the produced/need cooling performance of a refrigeration plant. If refrigeration plants are regarded according to their function (withdrawal of heat from a refrigeration chamber and delivery to the environment), the heating system is the producer of the requirement for cooling in 'the winter' (heating season). Thus, the refrigeration plant perhaps already has a marvellous efficiency, and the separate heating system too - however in interaction. The broad view moves into the focus. The possible approaches and effects are described in the contribution under consideration using the example of a Discount supermarket with a sales area of 800 square meters and a requirement of cooling of more than 30 kW.

  11. Analysis on energy saving potential of integrated supermarket HVAC and refrigeration systems using multiple subcoolers

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Liang [Institute of Refrigeration and Cryogenics, Shanghai Jiaotong University, Shanghai 200240 (China); China R and D Center, Carrier Corporation, No. 3239 Shen Jiang Road, Shanghai 201206 (China); Zhang, Chun-Lu [China R and D Center, Carrier Corporation, No. 3239 Shen Jiang Road, Shanghai 201206 (China)

    2010-02-15

    The paper presents a model-based analysis on the energy saving potential of supermarket HVAC (heating, ventilating, and air-conditioning) and refrigeration systems using multiple subcoolers among the high-temperature HVAC system, the medium-temperature refrigeration system, and the low-temperature refrigeration system. The principle of energy reduction is to have the higher COP (coefficient of performance) system generate more cooling capacity to increase the cooling capacity or reduce the power consumption of the lower COP system. The subcooler could be placed between the medium-temperature and low-temperature systems, between the high-temperature and medium-temperature systems, and between the high-temperature and low-temperature systems. All integration scenarios of adding one, two and three subcoolers have been investigated. The energy saving potential varies with the load ratio between high-, medium- and low-temperature systems, COP of three systems, and the ''on-off'' duty time of HVAC system. The optimal sequence of adding subcoolers is also proposed. (author)

  12. 2012 International Conference on Medical Physics and Biomedical Engineering Thermal Economic Analysis on LiBr Refrigeration -Heat Pump System Applied in CCHP System

    Science.gov (United States)

    Zhang, CuiZhen; Yang, Mo; Lu, Mei; Zhu, Jiaxian; Xu, Wendong

    LiBr refrigeration cooling water contains a lot of low-temperature heat source, can use this part of the heat source heat boiler feed water. This paper introduced LiBr refrigeration - heat pump system which recovery heat of the LiBr refrigeration cooling water by heat pump system to heat the feed water of boiler. Hot economic analysis on the system has been performed based on the experimental data. Results show that LiBr refrigeration-heat pump system brings 26.6 percent decrease in primary energy rate consumption comparing with the combined heat and power production system(CHP) and separate generation of cold;

  13. 三元制冷系统分析%Exergy analysis of a ternary refrigeration system

    Institute of Scientific and Technical Information of China (English)

    张小锋; 冯霄

    2016-01-01

    The separation process of an ethylene plant should be operated at low temperature. Therefore,a compression refrigeration system is needed to provide refrigerant. A ternary refrigeration system can provide a continuous cooling curve matching very well with the process stream cooling curve,and has higher thermodynamic efficiency,lower energy consumption than a cascaded refrigerant system. In order to analyze the energy saving potential of a ternary refrigeration system,in this paper, the ternary refrigerant system in a certain ethylene plant was analyzed by exergy analysis. From the exergy grand composite curve(EGCC),it could be found that the refrigerant configuration of the ternary refrigeration system was reasonable and the total exergy loss was small. The system is classified into four sub-systems:heat exchanger,compressor,throttle valve and flash drum sub-systems. The results of exergy losses show that the total exergy loss of the ternary refrigeration system is 24238.1kW,about 90% of which concentrates on the heat exchanger and compressor sub-systems. Furthermore,the exergy losses are divided into avoidable and inevitable exergy losses,in which the total inevitable exergy loss is 13539.9kW,and the total avoidable exergy loss is 10698.2kW. The work for energy conservation should focus on reducing the avoidable exergy loss.%乙烯装置产品分离过程需要在低温下进行,为此需配置压缩制冷系统为深冷分离提供冷量。三元压缩制冷由于能提供温位连续的制冷曲线,与工艺物流降温曲线更好地匹配,相比传统的复叠制冷具有热力学效率高、制冷能耗低的特点。为了分析三元压缩制冷的节能潜力,本文对某乙烯装置的三元制冷系统进行了㶲分析。从㶲总复合曲线(EGCC)图的分析可以得出该系统三元冷剂配置是比较合理的,㶲损失较小。将该制冷系统划分为换热器、压缩机、节流阀、闪蒸罐等子系统,并分别计算了

  14. Modeling of integral-type Stirling refrigerator using system dynamics approach

    Energy Technology Data Exchange (ETDEWEB)

    Huang, B.J.; Chen, H.Y. [National Taiwan Univ., Dept. of Mechanical Engineering, Taipei (Taiwan)

    2000-07-01

    A modeling of the integral-type Stirling refrigerator (ITSR) using a system dynamics approach is developed in the present study. The system dynamics models are derived to describe the input/output relation of each component of an ITSR. Connecting the equivalent circuits of the components together, we obtain a flow network diagram and derive a transfer function to represent system dynamics behavior of an ITSR. The performance analysis of an ITSR is then easily carried out by use of the transfer function with sinusoidal signal assumption. The performance calculation for a test refrigerator has shown that the analysis is accurate. An empirical correlation for a correction coefficient r in the expansion space was also derived for better results. The present study has demonstrated how a linear system theory or system dynamics approach can be applied to the design of an ITSR. (Author)

  15. Solar Multi-stage Refrigeration Systems on the Basis of Absorber with the Internal Evaporative Cooling

    Directory of Open Access Journals (Sweden)

    Doroshenko A.V.

    2015-08-01

    Full Text Available In the article, the developed schematics are presented for the alternative refrigeration systems and air-conditioning systems, based on the use of absorbing cycle and solar energy for the regeneration of absorbent solution. Multi-stage principle of construction of drying and cool contours of solar systems is used with growth of concentration of absorbent on the stages of cooler. An absorber with internal evaporative cooling, allowing to remove the separate evaporated cooler, usually included after the absorber of the proper stage, is developed. Heat-mass-transfer apparatus of film-type, entering in the complement of drying and cool contours compatible and executed on the basis of multichannel compositions from polymeric materials. The preliminary comparative analysis of possibilities of the solar refrigeration systems and air-conditioning systems is executed.

  16. 20 K Helium Refrigeration System for NASA-JSC Chamber-A

    Science.gov (United States)

    Homan, J.; Redman, R.; Ganni, V.; Sidi-Yekhelef, A.; Knudsen, P.; Norton, R.; Lauterbach, J.; Linza, R.; Vargas, G.

    2013-01-01

    A new 20 K helium refrigerator installed at NASA Johnson Space Center's Space Environment Simulation Laboratory (SESL) was successfully commissioned and tested in 2012. The refrigerator is used to create a deep space environment within SESL s Chamber A to perform ground testing of the James Webb Space Telescope. The chamber previously and currently still has helium cryopumping panels (CPP) and LN2 shrouds used to create Low Earth Orbit environments. Now with the new refrigerator and new helium shrouds (45 x 65 ) the chamber can create a deep space environment. The process design, system analysis, specification development, and commissioning oversight were performed by the cryogenics department at Jefferson Labs, while the contracts and system installation was performed by the ESC group at JSC. Commissioning data indicate a inverse coefficient of performance better than 70 W/W for a 18 KW load at 20 K (accounting for liquid nitrogen precooling power) that remains essentially constant down to 1/3 of this load. Even at 10 percent of the maximum capacity, the performance is better than 140 W/W at 20K. The refrigerator exceeded all design goals and demonstrated the ability to support a wide load range from 10kW at 15 K to 100 kW at 100K. The refrigerator is capable of operating at any load temperature from 15K to ambient with tight temperature stability. The new shroud (36 tons of aluminum) can be cooled from room temperature to 20 K in 24 hours. This paper will outline the process design and commissioning results.

  17. An experimental and numerical study on dynamic characteristic of linear compressor in refrigeration system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun; Roh, Chul-gi; Kim, Jong-kwon; Shin, Jong-min [Digital Appliance Company Laboratory, LG Electronics 391-2, Ga Eum Jeong-Dong, Changwon Gyeong Nam 641-711 (Korea); Hwang, Yujin; Lee, Jae-keun [School of Mechanical Engineering, Pusan National University, San 30, Changjeon-Dong, Keumjeong-Ku, Pusan 609-735 (Korea)

    2009-11-15

    This paper presents experimental and numerical results of the dynamic characteristic and COP of a linear compressor in a refrigeration system using R600 refrigerant. The numerical analysis consists of a model and a simulation that includes the linear compressor. In this study, the dynamic characteristic of the natural frequency of the linear compressor is validated by comparing the simulation results with the experimental results. To investigate the effect of system resonance on the performance of linear compressor, COP is evaluated under evaporator pressure in the range of 48.3-63.2 kPa abs, and condenser pressure in the range of 439.0-573.3 kPa abs. Based on the results, the system resonance at the TDC was varied within a range of 3% under the test conditions. COP and its sensitivity were found to vary within 3% according to the operating frequency of the system ranging from 48.5 to 51.5 Hz. (author)

  18. A Method for Online Steady State Energy Minimization with Application to Refrigeration Systems

    DEFF Research Database (Denmark)

    Larsen, Lars Finn Slot; Thybo, Claus; Stoustrup, Jakob;

    2004-01-01

    Energy efficiency of refrigeration systems has gradually been improved with the help of control schemes utilizing the more flexible components; the efficiency is though yet far from optimal. The flexibility initiates a higher degree of freedom in choosing the operating set points while obtaining...... the required cooling capacity. This paper proposes an approach which utilizes this newly gained degree of freedom to drive the system towards the energy optimal set-point while keeping up the cooling capacity. The focus of this paper is on refrigeration system however the generality of the proposed method thus...... applies to a broader range of process systems where the lower level set-points (in the control hierarchy) can be chosen within a degree of freedom allowing an optimization of a steady state performance index....

  19. About Solar Refrigeration

    Directory of Open Access Journals (Sweden)

    Laura Coroiu

    2008-05-01

    Full Text Available This paper has the purpose to unfold the results of all researches which proved before that the solar energy constitutes itself as an ideal resource for heating application that necessitate lower temperature,e.g. the heating of a certain space or the preparation ofthe domestic hot water. The refrigeration systems, which are based on the nontoxic refrigerants for the environment, offer a sustained advantage when compared to the other types of the refrigerants. But, whichever might be the case, the use of the energy associated to the operation of the refrigeration system and with the impact that it has upon the environment, as well as the association with its production and distribution, have often a bigger importance than the selection of the refrigerant. In order to minimize the impact which the operation of the refrigeration systems exerts upon the environment, it is recommended that there should be checked all thepossibilities of using a pure source of energy.

  20. EXERGOECONOMIC COMPARISON OF ABSORPTION REFRIGERATION SYSTEMS INCLUDING A HIBRID ABSORPTION-EJECTO COMPRESSION CHILLER

    Directory of Open Access Journals (Sweden)

    JUAN CARLOS BURBANO JARAMILLO

    2011-01-01

    Full Text Available El estudio de los sistemas de refrigeración por absorción ha tomado una importancia creciente en los últimos años, ya que la energía primaria que es usada en un sistema de absorción puede ser calor disponible de una fuente residual o de una renovable. Por lo tanto, estos sistemas no sólo usan energía que sería rechazada al ambiente sino también, evitan el consumo de energías fósiles o eléctricas costosas. El costo de producción de trabajo mecánico necesario para obtener un kW de refrigeración para el ciclo de compresión mecánico es, normalmente, más alto que el costo para recuperar el calor necesario para obtener el mismo kW en un ciclo de absorción. También, el uso de estos sistemas reduce el impacto ambiental disminuyendo la emisión de CO2. Este artículo pretende mostrar el desempeño de un chiller híbrido de absorción-eyecto compresión comparado con sistemas de absorción convencionales de agua/bromuro de litio de simple y doble efecto, por medio de un análisis exergético y exergoeconómico de estas configuraciones a fin de calcular el costo con base exergética del producto final. Fue incluido un sistema de refrigeración por compresión de vapor en los resultados, como comparación del desempeño con los sistemas de refrigeración por absorción analizados.

  1. Systemic Absorption of Nanomaterials by Oral Exposure

    DEFF Research Database (Denmark)

    Binderup, Mona-Lise; Bredsdorff, Lea; Beltoft, Vibe Meister;

    This report and accompanying database systematically evaluates the reliability and relevance of the existing scientific literature regarding systemic absorption of nanomaterials by oral exposure and makes specific recommendations for future testing approaches.......This report and accompanying database systematically evaluates the reliability and relevance of the existing scientific literature regarding systemic absorption of nanomaterials by oral exposure and makes specific recommendations for future testing approaches....

  2. Optimal Energy Consumption in Refrigeration Systems - Modelling and Non-Convex Optimisation

    DEFF Research Database (Denmark)

    Hovgaard, Tobias Gybel; Larsen, Lars F. S.; Skovrup, Morten J.;

    2012-01-01

    consumption in super market refrigeration systems. This model is used in a Nonlinear Model Predictive Controller (NMPC) to minimise the energy used by operation of a supermarket refrigeration system. The model is non-convex and we develop a computational efficient algorithm tailored to this problem...... that is somewhat more efficient than general purpose optimisation algorithms for NMPC and still near to optimal. Since the non-convex cost function has multiple extrema, standard methods for optimisation cannot be directly applied. A qualitative analysis of the system's constraints is presented and a unique...... to solve but some iterations might have to be performed in order to comply with the maximum capacity constraint. Finally, a nonlinear solver is used for a small example without separating the optimisation problem, and the results are compared to the outcome of our proposed minimisation procedure...

  3. Optimisation of the throttling system in a CO{sub 2} refrigerating machine

    Energy Technology Data Exchange (ETDEWEB)

    Casson, V.; Cecchinato, L.; Corradi, M.; Fornasieri, E.; Zamboni, L.; Zilio, C. [Universita degli Studi di Padova (Italy). Dipartimento di Fisica Tecnica; Girotto, S.; Minetto, S. [Costan SpA, Limana (Italy)

    2003-12-01

    This paper is an answer to the need of finding the optimal solution for the throttling system in refrigerating machines using CO{sub 2} as working fluid; such a solution must combine reliability, low installation cost and high energy efficiency. To this purpose, different expansion systems are compared by means of a simulation programme, including a new one, operating with a differential valve, a liquid receiver and a thermostatic valve. The typical compression refrigerating cycle performed by CO{sub 2} involves transcritical operations and therefore the upper pressure needs to be adjusted to the optimal value, that, unlike the traditional cycle, is not determined by heat transfer. The innovative system here proposed shows an intrinsic self-adjusting capability that leads to COP values quite close to the maximum ones when a fixed suitable value of the differential pressure is chosen, even if the temperature of the secondary fluid varies to a large extent. (Author)

  4. Performance study of unglazed cylindrical solar collector for adsorption refrigeration system

    Science.gov (United States)

    Mahesh, A.; Kaushik, S. C.; Kumaraguru, A. K.

    2013-12-01

    In the present communication, the unglazed cylindrical solar adsorber module is suggested for refrigeration and theoretical models for the heat and mass transfer in the cylindrical adsorber with heat balance equations in the collector components have been developed. It has been found that, both the SCP and COPsolar raises with increasing the evaporation temperature and drop off with the increase of the condensation temperature. The COPsolar increased from 0.15 to 0.52 with the increase of the total solar energy absorbed by the collector while the COPcycle varied in the range of 0.57-0.73. The efficiency of unglazed solar collector varied from 36 to 44 %. The cost of current unglazed adsorption refrigeration system is compared with the glazed system, and it is 33 to 50 % less than the cost of glazed system.

  5. Study on the irreversible thermodynamics of a marine engine exhaust-powered adsorption refrigerating system

    Science.gov (United States)

    Xie, Yingchun; Mei, Ning; Xu, Zhen

    2006-04-01

    This study investigates the heat and mass transfer mechanism of a marine engine exhaust-powered adsorption refrigerating system by using irreversible thermodynamics. The equations of entropy-production rate and the linear phenomenological equations of thermodynamic flux and force are established. The conventional experimental facilities of unit tube are developed and the phenomenological coefficients are obtained by fitting the experimental data. It is concluded that the thermodynamic process in the adsorbent bed is determined by the coupling effect of the heat and mass transfer; furthermore, the mass transfer is determined by the heat transfer. Taking some measures to increase heat transfer can improve the performance of the adsorption refrigerating system. The conclusions presented in this paper may be of value to the engineering applications of the system.

  6. Study on the Irreversible Thermodynamics of a Marine Engine Exhaust-powered Adsorption Refrigerating System

    Institute of Scientific and Technical Information of China (English)

    XIE Yingchun; MEI Ning; XU Zhen

    2006-01-01

    This study investigates the heat and mass transfer mechanism of a marine engine exhaust-powered adsorption refrigerating system by using irreversible thermodynamics. The equations of entropy-production rate and the linear phenomenological equations of thermodynamic flux and force are established. The conventional experimental facilities of unit tube are developed and the phenomenological coefficients are obtained by fitting the experimental data. It is concluded that the thermodynamic process in the adsorbent bed is determined by the coupling effect of the heat and mass transfer; furthermore, the mass transfer is determined by the heat transfer. Taking some measures to increase heat transfer can improve the performance of the adsorption refrigerating system. The conclusions presented in this paper may be of value to the engineering applications of the system.

  7. Modeling and investigation of refrigeration system performance with two-phase fluid injection in a scroll compressor

    Science.gov (United States)

    Gu, Rui

    Vapor compression cycles are widely used in heating, refrigerating and air-conditioning. A slight performance improvement in the components of a vapor compression cycle, such as the compressor, can play a significant role in saving energy use. However, the complexity and cost of these improvements can block their application in the market. Modifying the conventional cycle configuration can offer a less complex and less costly alternative approach. Economizing is a common modification for improving the performance of the refrigeration cycle, resulting in decreasing the work required to compress the gas per unit mass. Traditionally, economizing requires multi-stage compressors, the cost of which has restrained the scope for practical implementation. Compressors with injection ports, which can be used to inject economized refrigerant during the compression process, introduce new possibilities for economization with less cost. This work focuses on computationally investigating a refrigeration system performance with two-phase fluid injection, developing a better understanding of the impact of injected refrigerant quality on refrigeration system performance as well as evaluating the potential COP improvement that injection provides based on refrigeration system performance provided by Copeland.

  8. Thermodynamic design of a cascade refrigeration system of liquefied natural gas by applying mixed integer non-linear programming

    Institute of Scientific and Technical Information of China (English)

    Meysam Kamalinejad; Majid Amidpour; S.M. Mousavi Naeynian

    2015-01-01

    Liquefied natural gas (LNG) is the most economical way of transporting natural gas (NG) over long distances. Liq-uefaction of NG using vapor compression refrigeration system requires high operating and capital cost. Due to lack of systematic design methods for multistage refrigeration cycles, conventional approaches to determine op-timal cycle are largely trial-and-error. In this paper a novel mixed integer non-linear programming (MINLP) model is introduced to select optimal synthesis of refrigeration systems to reduce both operating and capital costs of an LNG plant. Better conceptual understanding of design improvement is illustrated on composite curve (CC) and exergetic grand composite curve (EGCC) of pinch analysis diagrams. In this method a superstruc-ture representation of complex refrigeration system is developed to select and optimize key decision variables in refrigeration cycles (i.e. partition temperature, compression configuration, refrigeration features, refrigerant flow rate and economic trade-off). Based on this method a program (LNG-Pro) is developed which integrates VBA, Refprop and Excel MINLP Solver to automate the methodology. Design procedure is applied on a sample LNG plant to illustrate advantages of using this method which shows a 3.3% reduction in total shaft work consumption.

  9. The Experimental Research on Refrigerant Mixtures of a Linde-Hampson Refrigeration System%混合工质Linde-Hampson制冷系统的实验研究

    Institute of Scientific and Technical Information of China (English)

    朱军韬; 张华

    2012-01-01

    搭建了混合工质Linde-Hampson制冷系统,将4种工质R245fa/R600a/R508b/R14按照不同比例混合后进行实验研究.通过优化制冷剂组分得到不同配比下的最低运行温度,分析了最优配比下环境温度对系统运行性能的影响.结果表明:将4种工质按照不同配比进行混合,系统的最低运行温度范围在-45℃~-85℃之间.在环境温度35℃时,混合工质按比例R245 fa∶R600a∶R508b∶R 14=0.45∶0.3∶0.18∶0.07充注时,系统运行温度可达到-85℃,在此条件下,将环境温度从35℃降低到5℃,系统运行温度则从-85.5℃降低到-89.3℃.%The performance of quaternionic refrigerant mixtures, R345fa/R600a/R508b/R14, in Linde-Hampson refrigeration cycle was experimentally investigated. To get the lowest operation temperature, the components of refrigerant mixtures were optimized. The influence of ambient temperature on system operational performance was analyzed. It is shown that the lowest system operation temperature could reach from -4S'C to -85°C when mixing the four refrigerant components at different species ratio,. If the proportion of the refrigerant mixtures charged is R245fa:R600a:R508b:R14=0.45:0.3:0.18:0.07, the operating temperature of the system can reach -85℃ when the ambient temperature is 35°C. With the same refrigerant mixtures, the system temperature can reach -89.3℃ if the ambient temperature decreases from 35℃to5℃.

  10. Nonlinear FOPDT Model Identification for the Superheat Dynamic in a Refrigeration System

    DEFF Research Database (Denmark)

    Yang, Zhenyu; Sun, Zhen; Andersen, Casper

    2011-01-01

    An on-line nonlinear FOPDT system identification method is proposed and applied to model the superheat dynamic in a supermarket refrigeration system. The considered nonlinear FOPDT model is an extension of the standard FOPDT model by means that its parameters are time dependent. After the conside......An on-line nonlinear FOPDT system identification method is proposed and applied to model the superheat dynamic in a supermarket refrigeration system. The considered nonlinear FOPDT model is an extension of the standard FOPDT model by means that its parameters are time dependent. After......-dependent parameters. The proposed method is firstly tested through a number of numerical examples, and then applied to model the superheat dynamic in a supermarket refrigeration system based on experimental data. As shown in these studies, the proposed method is quite promising in terms of reasonable accuracy, large...... flexibility and low computation load. The study on the superheat also clearly showed time varying properties of superheat dynamic, which indicate some necessity of adaptive mechanism of efficient superheat control....

  11. Cooling performance and evaluation of automotive refrigeration system for a passenger car

    Science.gov (United States)

    Prajitno, Deendarlianto, Majid, Akmal Irfan; Mardani, Mahardeka Dhias; Wicaksono, Wendi; Kamal, Samsul; Purwanto, Teguh Pudji; Fauzun

    2016-06-01

    A new design of automotive refrigeration system for a passenger car was proposed. To ensure less energy consumption and optimal thermal comfort, the performance of the system were evaluated. This current research was aimed to evaluate the refrigeration characteristics of the system for several types of cooling load. In this present study, a four-passenger wagon car with 1500 cc gasoline engine that equipped by a belt driven compressor (BDC) was used as the tested vehicle. To represent the tropical condition, a set of lamps and wind sources are installed around the vehicle. The blower capacity inside a car is varied from 0.015 m/s to 0.027 m/s and the compressor speed is varied at variable 820, 1400, and 2100 rpm at a set temperature of 22°C. A set of thermocouples that combined by data logger were used to measure the temperature distribution. The system uses R-134a as the refrigerant. In order to determine the cooling capacity of the vehicle, two conditions were presented: without passengers and full load conditions. As the results, cooling capacity from any possible heating sources and transient characteristics of temperature in both systems for the cabin, engine, compressor, and condenser are presented in this work. As the load increases, the outlet temperature of evaporator also increases due to the increase of condensed air. This phenomenon also causes the increase of compressor work and compression ratio which associated to the addition of specific volume in compressor inlet.

  12. Experimental Study of Heat and Mass Transfer Enhancement of Absorption Refrigeration by Mechanical Vibration%机械振动强化吸收式制冷传热传质的实验研究

    Institute of Scientific and Technical Information of China (English)

    申江; 邹国文; 王建民; Josephine Lau; 申子奇; 孙欢

    2016-01-01

    Effects of mechanical vibration on the heat and mass transfer process of absorption refrigerating system had been researched in this paper. A performance appraisal test bench was set up, thus an electrodynamics vibration generator was installed on the bottom of the absorption refrigerating machine to add vertical vibration into the system. Enhancement effects of vibration frequencies and amplitude on the heat and mass transfer process of absorption refrigerating machine were analyzed respectively. The results showed that when amplitude was constant, vibration frequencies had a strong effect on enhancement effect; and under the optimum spray volume and same vibration frequency, the enhancement effect of vibration would be reduced with too high or too low vibration amplitude. And in the range of test, frequency ranges for the best enhancement effect was 20-30 Hz, in these conditions, the enhancement effect of heat transfer could be 8%-20%, the enhancement effect of mass transfer could be 10% -25%, and cooling capacity increased by 12% -18%.%本文对机械振动强化吸收式制冷传热传质进行实验研究。搭建了一套综合的性能研究实验台,在吸收式制冷机的底部安装了一个电动振动机,使机组在垂直方向上产生振动,分别对振动频率和振幅两个因素对机组性能强化的效果进行实验分析,得出结论:振幅相同时,振动频率对强化效果的影响较大;而在最佳喷淋量下,频率相同时,振幅太大或太小,振动的强化效果都会下降。且在实验范围内,得到最佳强化效果的频率段为20~30 Hz,此时传热的强化效果可达到8%~20%,传质的强化效果可达到10%~25%,制冷量可提高12%~18%。

  13. Using Acid Number as a Leading Indicator of Refrigeration and Air Conditioning System Performance

    Energy Technology Data Exchange (ETDEWEB)

    Dennis Cartlidge; Hans Schellhase

    2003-07-31

    This report summarizes a literature review to assess the acidity characteristics of the older mineral oil and newer polyolester (POE) refrigeration systems as well as to evaluate acid measuring techniques used in other non-aqueous systems which may be applicable for refrigeration systems. Failure in the older chlorofluorocarbon/hydrochlorofluorocarbon (CFC/HCFC) / mineral oil systems was primarily due to thermal degradation of the refrigerant which resulted in the formation of hydrochloric and hydrofluoric acids. These are strong mineral acids, which can, over time, severely corrode the system metals and lead to the formation of copper plating on iron surfaces. The oil lubricants used in the older systems were relatively stable and were not prone to hydrolytic degradation due to the low solubility of water in oil. The refrigerants in the newer hydrofluorocarbon (HFC)/POE systems are much more thermally stable than the older CFC/HCFC refrigerants and mineral acid formation is negligible. However, acidity is produced in the new systems by hydrolytic decomposition of the POE lubricants with water to produce the parent organic acids and alcohols used to prepare the POE. The individual acids can therefore vary but they are generally C5 to C9 carboxylic acids. Organic acids are much weaker and far less corrosive to metals than the mineral acids from the older systems but they can, over long time periods, react with metals to form carboxylic metal salts. The salts tend to accumulate in narrow areas such as capillary tubes, particularly if residual hydrocarbon processing chemicals are present in the system, which can lead to plugging. The rate of acid production from POEs varies on a number of factors including chemical structure, moisture levels, temperature, acid concentration and metals. The hydrolysis rate of reaction can be reduced by using driers to reduce the free water concentration and by using scavenging chemicals which react with the system acids. Total acid

  14. Optimal Design and Operation of Helium Refrigeration Systems Using the Ganni Cycle

    Science.gov (United States)

    Ganni, V.; Knudsen, P.

    2010-04-01

    The constant pressure ratio process, as implemented in the floating pressure—Ganni cycle, is a new variation to prior cryogenic refrigeration and liquefaction cycle designs that allows for optimal operation and design of helium refrigeration systems. This cycle is based upon the traditional equipment used for helium refrigeration system designs, i.e., constant volume displacement compression and critical flow expansion devices. It takes advantage of the fact that for a given load, the expander sets the compressor discharge pressure and the compressor sets its own suction pressure. This cycle not only provides an essentially constant system Carnot efficiency over a wide load range, but invalidates the traditional philosophy that the (`TS') design condition is the optimal operating condition for a given load using the as-built hardware. As such, the Floating Pressure-Ganni Cycle is a solution to reduce the energy consumption while increasing the reliability, flexibility and stability of these systems over a wide operating range and different operating modes and is applicable to most of the existing plants. This paper explains the basic theory behind this cycle operation and contrasts it to the traditional operational philosophies presently used.

  15. OPTIMAL DESIGN AND OPERATION OF HELIUM REFRIGERATION SYSTEMS USING THE GANNI CYCLE

    Energy Technology Data Exchange (ETDEWEB)

    Venkatarao Ganni, Peter Knudsen

    2010-04-01

    The constant pressure ratio process, as implemented in the floating pressure - Ganni cycle, is a new variation to prior cryogenic refrigeration and liquefaction cycle designs that allows for optimal operation and design of helium refrigeration systems. This cycle is based upon the traditional equipment used for helium refrigeration system designs, i.e., constant volume displacement compression and critical flow expansion devices. It takes advantage of the fact that for a given load, the expander sets the compressor discharge pressure and the compressor sets its own suction pressure. This cycle not only provides an essentially constant system Carnot efficiency over a wide load range, but invalidates the traditional philosophy that the (‘TS’) design condition is the optimal operating condition for a given load using the as-built hardware. As such, the Floating Pressure- Ganni Cycle is a solution to reduce the energy consumption while increasing the reliability, flexibility and stability of these systems over a wide operating range and different operating modes and is applicable to most of the existing plants. This paper explains the basic theory behind this cycle operation and contrasts it to the traditional operational philosophies presently used.

  16. New report reveals eco-efficiency of supermarket refrigeration systems. Refrigerant choice; Rapport onthult eco-effiency van supermarktkoelsystemen. Koudemiddelkeuze

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-11-15

    Ever since the EU has committed to cut greenhouse gas emissions by 20%, food retailers have been under enormous pressure to reduce their carbon footprint. Refrigeration is part of the solution, as it accounts for some 50% of the energy consumption in a typical store. A new report by the British environmental consultants SKM Enviros evaluates different refrigeration solutions. [Dutch] Sinds de EU heeft besloten de uitstoot van broeikasgassen met twintig procent terug te brengen, staan foodretailers onder enorme druk om hun ecologische 'footprint' te verminderen. Koeling is een onderdeel van de oplossing, omdat het circa vijftig procent van het energiegebruik in een gemiddelde winkel voor zijn rekening neemt. Een nieuw rapport van de Britse milieuconsultants SKM Enviros evalueert verschillende koeloplossingen.

  17. Thermodynamic, Environmental and Economic Analyses of Solar Ejector Refrigeration System Application for Cold Storage

    OpenAIRE

    2009-01-01

    The refrigeration processes have been widely applied for especially in cold storages. In these plants, the systems working with compressed vapour cooling cycles have been used as a classical method. In general, electrical energy is used for compressing in these processes. Although, mainly the electricity itself has no pollution effect on the environment, the fossil fuels that are widely used to produce electricity in the most of the world, affect the nature terribly. In short, these refrigera...

  18. User evaluation of photovoltaic-powered vaccine refrigerator/freezer systems

    Science.gov (United States)

    Ratajczak, Anthony F.

    1987-01-01

    The NASA Lewis Research Center has concluded a project to develop and field test photovoltaic-powered refrigerator/freezers for vaccine storage in remote areas of developing countries. As a conclusion to this project, questionnaires were sent to the in-country administrators for each test site probing user acceptance of the systems and attitudes regarding procurement of additional systems. Responses indicate that the systems had a positive effect on the local communities, that they made a positive impression on the local health authorities, and that system cost and scarcity of funds are the major barriers to procurements of additional systems.

  19. Molecular hydrogen absorption systems in SDSS

    CERN Document Server

    Balashev, S A; Ivanchik, A V; Varshalovich, D A; Petitjean, P; Noterdaeme, P

    2014-01-01

    We present a systematic search for molecular hydrogen absorption systems at high redshift in quasar spectra from the Sloan Digital Sky Survey (SDSS) II Data Release 7 and SDSS-III Data Release 9. We have selected candidates using a modified profile fitting technique taking into account that the Ly$\\alpha$ forest can effectively mimic H$_2$ absorption systems at the resolution of SDSS data. To estimate the confidence level of the detections, we use two methods: a Monte-Carlo sampling and an analysis of control samples. The analysis of control samples allows us to define regions of the spectral quality parameter space where H$_2$ absorption systems can be confidently identified. We find that H$_2$ absorption systems with column densities $\\log {\\rm N_{H_2}} > 19$ can be detected in only less than 3% of SDSS quasar spectra. We estimate the upper limit on the detection rate of saturated H$_2$ absorption systems ($\\log {\\rm N_{H_2}} > 19$) in Damped Ly-$\\alpha$ (DLA) systems to be about 7%. We provide a sample of ...

  20. Numerical model of sprayed air cooled condenser coupled to refrigerating system

    Energy Technology Data Exchange (ETDEWEB)

    Youbi-Idrissi, M.; Macchi-Tejeda, H.; Fournaison, L.; Guilpart, J. [Refrigerating Processes Research Unit, CEMAGEF, Parc de Tourvoie, BP 44, 92163 Antony Cedex (France)

    2007-07-15

    Because of technological, economic and environmental constraints, many refrigeration and air conditioning units are equipped with a simple air cooled condenser. Spraying the condenser seems to be an original solution to improve the energetic performances of such systems. To characterise this energetic benefit, a semi-local mathematical model was developed and applied to a refrigerating machine with and without spraying its air cooled condenser. It is found that, compared to a dry air cooled condenser, both the calorific capacity and machine COP increase by 13% and 55%, respectively. Furthermore, the model shows that a spray flow rate threshold occurs. It should not be exceeded to assure an effective and rational spray use. (author)

  1. Optimal design of solid oxide fuel cell, ammonia-water single effect absorption cycle and Rankine steam cycle hybrid system

    Science.gov (United States)

    Mehrpooya, Mehdi; Dehghani, Hossein; Ali Moosavian, S. M.

    2016-02-01

    A combined system containing solid oxide fuel cell-gas turbine power plant, Rankine steam cycle and ammonia-water absorption refrigeration system is introduced and analyzed. In this process, power, heat and cooling are produced. Energy and exergy analyses along with the economic factors are used to distinguish optimum operating point of the system. The developed electrochemical model of the fuel cell is validated with experimental results. Thermodynamic package and main parameters of the absorption refrigeration system are validated. The power output of the system is 500 kW. An optimization problem is defined in order to finding the optimal operating point. Decision variables are current density, temperature of the exhaust gases from the boiler, steam turbine pressure (high and medium), generator temperature and consumed cooling water. Results indicate that electrical efficiency of the combined system is 62.4% (LHV). Produced refrigeration (at -10 °C) and heat recovery are 101 kW and 22.1 kW respectively. Investment cost for the combined system (without absorption cycle) is about 2917 kW-1.

  2. New empirical correlations for sizing adiabatic capillary tubes in refrigeration systems

    Science.gov (United States)

    Shodiya, S.; Aahar, A. A.; Henry, N.; Darus, A. N.

    2012-06-01

    This paper presents new empirical correlations that have been developed for sizing adiabatic capillary tubes used in small vapor compression refrigeration and air-conditioning systems. A numerical model which is based on the basic equations of conservation of mass, momentum and energy was developed. Colebrook's formulation was used to determine the single phase friction factor. The two-phase viscosity models - Cicchitti et al., Dukler et al. and McAdam et al. were used based on the recommendation from literature to determine the two-phase viscosity factor. The developed numerical model was validated using the experimental data from literature. The numerical model was used to study the effects of relevant parameters on capillary tube length and the results showed that the length of capillary tube increase with increase in condensing temperature, subcooling, and inner diameter of tube but decrease with increase in surface roughness and mass flow rate. Thereafter, empirical correlation of the capillary tube length with the five dependent variables was presented. The empirical models are validated using experimental data from literature. Different from the previous studies, the empirical models have a large set of refrigerants and wide operating conditions. The developed correlation can be used as an effective tool for sizing adiabatic capillary tube with system models working with alternative refrigerants.

  3. Optimization Strategies for a Portable Thermoelectric Vaccine Refrigeration System in Developing Communities

    Science.gov (United States)

    Ohara, B.; Sitar, R.; Soares, J.; Novisoff, P.; Nunez-Perez, A.; Lee, H.

    2015-06-01

    The traditional approach to determine an optimum current for thermoelectric cooling assumes that a refrigeration chamber is insulated and has no thermal resistance to a thermoelectric module. As a result, minimum temperature occurs when Peltier cooling matches with parasitic heat transfer and Joule heating. In practical application, minimum temperature happens when heat addition from the environment is matched with heat extracted by a thermoelectric module, and the optimum current differs from that anticipated by the traditional approach. Hence, consideration for insulation and thermal resistances via thermoelectric module should be made to achieve desirable cooling performance/refrigeration temperature. This paper presents a modeling approach to determine the optimum current as well as the optimum geometry to power a small thermoelectric vaccine delivery system for developing communities under the World Health Organization requirements. The model is derived from three energy conservation equations for temperatures at both ends of the thermoelectric materials within a module, as well as the refrigeration chamber temperature. A prototype was built and demonstrated a minimum temperature of 3.4°C. With optimized module geometry, the system is estimated to reduce power consumption by over 50% while achieving twice the temperature difference.

  4. The Effect of the Capillary Tube Coil Number on the Refrigeration System Performance

    Directory of Open Access Journals (Sweden)

    Thamir K. Salim

    2012-06-01

    Full Text Available The capillary tube performance for (R134a is experimentally investigated. The experimental setup is a real vapor compression refrigeration system. All properties of the refrigeration system are measured for various mass flow rate from (13 – 23 kg/hr and capillary tube coil number (0-4 with fixed length (150 cm and capillary diameter(2.5mm.The results showed that the theoretical compression power increases by (65.8 % as the condenser temperature increases by (2.71%, also the theoretical compression power decreases by (10.3 % as the capillary tube coil number increases.The study shows also that the cooling capacity increases by (65.3% as the evaporator temperature increases by (8.4 %, and the cooling capacity increases by (1.6%as the capillary tube coil number increases in the range (0-4.The coefficient of performance decreases by (43.4 %, as the mass flow rateincreases by (76.9%, also the coefficient of performance increases by (13.51 % as thecapillary tube coil number increases in the range (0-4.Through this study, it was found that the best coil number in refrigeration cycle at the lowest mass flow rate (31 Kg/hr and at high mass flow rate (23 Kg/hr is (coil number = 4, this will give the highest performance, cooling capacity and lowest theoretical compression power.

  5. ISABELLE Forced Circulation Cooling System: Proposed Method of Producing and Distributing Helium Refrigerant for 4.5 K Superconducting Magnets

    Energy Technology Data Exchange (ETDEWEB)

    Brown, D. P.

    1976-04-15

    A report is given of the refrigeration system proposed for ISABELLE. The system features a single refrigerator of about 25 kW capacity. The refrigerant helium is supplied to the 960 ISABELLE Magnets at a pressure of 15 atm and a temperature of 2.80K. The return to the refrigerator is at 14.3 atm and a 6.20K. As many as 60 magnets will be cooled in series. The steady-state design temperature for the warmest magnet is 4.30K. This temperature will rise to 4.50K during the acceleration cycle.

  6. PROCESSES OF HEAT-MASS-TRANSFER IN APPARATUS OF SOLAR ABSORBING REFRIGERATION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Doroshenko A.V.

    2014-12-01

    Full Text Available Ideology of development of the solar refrigeration systems and systems of air-conditioning, based on the use of absorbing cycle and solar energy for the regeneration of absorbent solution, is presented in the article. The processes of joint heat-mass-transfer are considered in the direct and indirect types of evaporated coolers taking into account the phenomenon of re-condensation of aquatic steams at the low temperature evaporated cooling of environments. The pre-liminary analysis of possibilities of the solar systems is executed as it applies in relation to the tasks of cooling of envi-ronments and air-conditioning systems.

  7. Traveling-wave maser closed-cycle refrigerator data acquisition and display system

    Science.gov (United States)

    Fowler, L.; Britcliffe, M.

    1987-01-01

    A data acquisition and display system that automatically monitors the performance of the 4.5-K closed-cycle refrigerators used to cryogenically cool traveling-wave masers is described. The system displays and stores operating parameters for the purpose of providing status information, failure prediction, and analysis. A prototype of this system will be installed at Deep Space Network 12 in the near future. The advantages of using commercial data acquisition hardware with installed operating systems and BASIC programs for this application are discussed.

  8. Traveling-wave maser closed-cycle refrigerator data acquisition and display system

    Science.gov (United States)

    Fowler, L.; Britcliffe, M.

    1987-11-01

    A data acquisition and display system that automatically monitors the performance of the 4.5-K closed-cycle refrigerators used to cryogenically cool traveling-wave masers is described. The system displays and stores operating parameters for the purpose of providing status information, failure prediction, and analysis. A prototype of this system will be installed at Deep Space Network 12 in the near future. The advantages of using commercial data acquisition hardware with installed operating systems and BASIC programs for this application are discussed.

  9. ARTI refrigerant database

    Energy Technology Data Exchange (ETDEWEB)

    Calm, J.M. [Calm (James M.), Great Falls, VA (United States)

    1998-08-01

    The Refrigerant Database is an information system on alternative refrigerants, associated lubricants, and their use in air conditioning and refrigeration. It consolidates and facilitates access to property, compatibility, environmental, safety, application and other information. It provides corresponding information on older refrigerants, to assist manufactures and those using alternative refrigerants, to make comparisons and determine differences. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern. The database provides bibliographic citations and abstracts for publications that may be useful in research and design of air-conditioning and refrigeration equipment. The complete documents are not included, though some may be added at a later date. The database identifies sources of specific information on many refrigerants including propane, ammonia, water, carbon dioxide, propylene, ethers, and others as well as azeotropic and zeotropic blends of these fluids. It addresses lubricants including alkylbenzene, polyalkylene glycol, polyolester, and other synthetics as well as mineral oils. It also references documents addressing compatibility of refrigerants and lubricants with metals, plastics, elastomers, motor insulation, and other materials used in refrigerant circuits. Incomplete citations or abstracts are provided for some documents. They are included to accelerate availability of the information and will be completed or replaced in future updates.

  10. ARTI refrigerant database

    Energy Technology Data Exchange (ETDEWEB)

    Calm, J.M.

    1997-02-01

    The Refrigerant Database is an information system on alternative refrigerants, associated lubricants, and their use in air conditioning and refrigeration. It consolidates and facilitates access to property, compatibility, environmental, safety, application and other information. It provides corresponding information on older refrigerants, to assist manufacturers and those using alterative refrigerants, to make comparisons and determine differences. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern. The database provides bibliographic citations and abstracts for publications that may be useful in research and design of air-conditioning and refrigeration equipment. The complete documents are not included, though some may be added at a later date. The database identifies sources of specific information on various refrigerants. It addresses lubricants including alkylbenzene, polyalkylene glycol, polyolester, and other synthetics as well as mineral oils. It also references documents addressing compatibility of refrigerants and lubricants with metals, plastics, elastomers, motor insulation, and other materials used in refrigerant circuits. Incomplete citations or abstracts are provided for some documents. They are included to accelerate availability of the information and will be completed or replaced in future updates.

  11. Plasmon absorption modulator systems and methods

    Science.gov (United States)

    Kekatpure, Rohan Deodatta; Davids, Paul

    2014-07-15

    Plasmon absorption modulator systems and methods are disclosed. A plasmon absorption modulator system includes a semiconductor substrate, a plurality of quantum well layers stacked on a top surface of the semiconductor substrate, and a metal layer formed on a top surface of the stack of quantum well layers. A method for modulating plasmonic current includes enabling propagation of the plasmonic current along a metal layer, and applying a voltage across the stack of quantum well layers to cause absorption of a portion of energy of the plasmonic current by the stack of quantum well layers. A metamaterial switching system includes a semiconductor substrate, a plurality of quantum well layers stacked on a top surface of the semiconductor substrate, and at least one metamaterial structure formed on a top surface of the stack of quantum well layers.

  12. Experimental study on activated carbon-nitrogen pair in a prototype pressure swing adsorption refrigeration system

    Science.gov (United States)

    Anupam, Kumar; Palodkar, Avinash V.; Halder, G. N.

    2016-04-01

    Pressure swing adsorption of nitrogen onto granular activated carbon in the single-bed adsorber-desorber chamber has been studied at six different pressures 6-18 kgf/cm2 to evaluate their performance as an alternative refrigeration technique. Refrigerating effect showed a linear rise with an increase in the operating pressure. However, the heat of adsorption and COP exhibited initial rise with the increasing operating pressure but decreased later after reaching a maximum value. The COP initially increases with operating pressures however, with the further rise of operating pressure it steadily decreased. The highest average refrigeration, maximum heat of adsorption and optimum coefficient of performance was evaluated to be 415.38 W at 18 kgf/cm2, 92756.35 J at 15 kgf/cm2 and 1.32 at 12 kgf/cm2, respectively. The system successfully produced chilled water at 1.7 °C from ambient water at 28.2 °C.

  13. Extra-low-noise refrigerator with active noise control system, GR-W40NVI. Nodo seigyo choseiongata reizoko GR-W40NVI

    Energy Technology Data Exchange (ETDEWEB)

    Sekiguchi, Y.; Nakanishi, K.; Saruta, S. (Toshiba Corp., Tokyo (Japan))

    1991-04-20

    Aiming at lowering the noise down to a domestic background noise level, development was made of GR-W40NVI, extra-low-noise refrigerator with an active noise control system. The active control for lowering the noise is methodically to artificially generate sound, reverse in phase against the noise to be generated, silence it by acoustic wave interference, and theoretically reduce the acoustic pressure to zero. Such a technology was applied to the refrigerator morphologically as follows: In order to silence the noise, generated by the compressor and three-dimensionally diffused, by a simple structure, duct structure is applied for the noise to be diffused in one direction only, by acoustically insulating and confining the compressor with exception of its thermal exhaust opening. In order to lower the noise, generated by the compressor and amplified in zonal region, the active control is applied against the low frequency noise, while the conventional acoustic insulation/absorption technology is done against the high frequency noise. In order to quickly and accurately prepare sound, reverse in phase against the noise under fluctuation, signal processing is made by using digital signal processor (DSP), hardware exclusively for it. As a result, the noise was lowered by about 7dB (1/5) for the basic type of refrigerator. 12 figs.

  14. High-efficiency absorption-type heat pumps and refrigerators. From topology to the pilot plant; Hocheffiziente Absorptionsmaschinen zur Versorgung mit Kaelte und Waerme. Von der Topologie zur Pilotanlage

    Energy Technology Data Exchange (ETDEWEB)

    Ziegler, F.; Demmel, S.; Lamp, P. [Bayerisches Zentrum fuer Angewandte Energieforschung e.V. (ZAE Bayern), Wuerzburg (Germany); Kahn, R. [Technische Univ. Muenchen (Germany). Physik Dept. E19; Alefeld, G.

    1998-12-31

    Absorption-type heat pumps or refrigerators are systems operated with heat. They have been known for a long time and are frequently used especially in airconditioning in the USA and south-east Asia. However, the conventional technique used is subject to many physical limitations, restricting their broader use. The paper demonstrates ways of overcoming these restrictions, for instance by multi-stage design. The exploitation of topological principles much facilitates the synthesis of novel circuits. The technical relevance of such developments is demonstrated by means of selected examples of executed laboratory and pilot plants. Modern absorption technology saves resources and prevents environmental pollution by consuming less fossil energy compared with the conventional technique, for instance by harnessing the thermal potential of solar energy or utilizing waste heat and residual heat, and, not least, thanks to the use of natural refrigerants. (orig.) [Deutsch] Absorptionswaermepumpen oder -kaeltemaschinen sind durch Waerme angetriebene Anlagen, die seit langem bekannt sind und besonders in der Klimatechnik in den USA und im suedostasiatischen Raum haeufig eingesetzt werden. Die dabei verwendete konventionelle Technik unterliegt allerdings vielfaeltigen physikalischen Einschraenkungen, die ihre noch breitere Anwendung verhindern. Es wird gezeigt, wie diese Einschraenkungen beispielsweise durch Mehrstufigkeit ueberwunden werden koennen. Durch die Verwendung topologischer Grundsaetze wird die Synthese neuartiger Kreislaeufe stark vereinfacht. Die technische Bedeutung solcher Entwicklungen wird an ausgewaehlten Beispielen ausgefuehrter Labor- und Pilotanlagen gezeigt. Durch den im Vergleich zu konventioneller Technik geringeren Verbrauch an fossiler Energie, beispielsweise durch die thermische Nutzung von Sonnenenergie oder durch die Nutzung von Ab- oder Restwaerme und nicht zuletzt durch die Verwendung natuerlicher Kaeltemittel werden bei Einsatz moderner

  15. Performance prediction of a refrigerating machine using R-407C: the effect of the circulating composition on system performance

    Energy Technology Data Exchange (ETDEWEB)

    Haberschill, P.; Gay, L.; Lallemand, M. [UMR, CNRS, Villeurbanne (France). INSA, Centre de Thermique; Aubouin, P. [EDF, DTTA, Chatou (France)

    2002-07-01

    This article presents a steady-state model of a vapour compression refrigerating machine using a ternary refrigerant mixture R-407C. When using a zeotropic mixture in a refrigerant cycle, the circulating composition does not agree with the composition of the original charged mixture. It is mainly due to the temperature glide and the vapour-liquid slip ratio. As a result of the composition shift and its magnitude, the system performance changes depending on the system design, especially the presence of liquid receiving vessels. In this paper, a method that predicts the circulating composition has been associated to a refrigerating machine model. The results obtained with this model show an enrichment in the most volatile components of about 1% for the circulating composition, which is sufficient to decrease the system performance by about 3%. Factors affecting the overall performance have been investigated. The results show a very strong performance dependence on the refrigerant charge. The COP can decrease by 25% when the refrigerant charge is insufficient. An initial charged composition variation of 2% involves variations of the cooling capacity of about 5%. Furthermore, our model was employed to compare the performance for both R-22 and R-407C. The cooling capacity for R-22 is slightly greater in comparison to R-407C and the COP is almost constant. (author)

  16. Thermodynamic Analysis of Actual Vapour Compression System with R12 and Its Eco-Friendly Alternatives Refrigerants

    Directory of Open Access Journals (Sweden)

    Vijay Singh Bisht

    2014-04-01

    Full Text Available This paper presents a theoretical performance study of a vapour compression refrigeration system with refrigerants R-12, R134a and R1234yf. A computational model based on energy first law analysis is presented for the investigation of the effects of evaporating temperatures, degree of subcooling, dead state temperatures and effectiveness of the liquid vapour heat exchanger on the relative capacity change index, coefficient of performance of the vapour compression refrigeration cycle. RCI (relative capacity change index of the system is highest for R1234yf and with increase in degree of subcooling; R1234yf has the highest percentage increase in COP. The total compressor work requirement for system is highest with R134a. R1234yf is the only refrigerants of all the refrigerants used in present work that satisfy MAC directive (2006/40/EG because of GWP value less than 150. From these results, it is indicated that R1234yf is the refrigerant for future.

  17. Performance of Active Wave Absorption Systems

    DEFF Research Database (Denmark)

    Hald, Tue; Frigaard, Peter

    A comparison of wave gauge based on velocity meter based active absorption systems is presented discussing advantages and disadvantages of the systems. In detail one system based on two surface elevations, one system based on a surface elevation and a horisontal velocity and one system based...... on a horisontal and vertical velocity are treated. All three systems are based on digital FIR-filters. For numerical comparison a performance function combining the frequency response of the set of filters for each system is derived enabling discussion on optimal filter design and system setup. Irregular wave...

  18. Modeling the dynamic response of pressures in a distributed helium refrigeration system

    Energy Technology Data Exchange (ETDEWEB)

    Brubaker, John Carl [Illinois Inst. of Technology, Chicago, IL (United States)

    1997-12-01

    A mathematical model is created of the dynamic response of pressures caused by flow inputs to an existing distributed helium refrigeration system. The dynamic system studied consists of the suction and discharge pressure headers and compressor portions of the refrigeration system used to cool the superconducting magnets of the Tevatron accelerator at the Fermi National Accelerator Laboratory. The modeling method involves identifying the system from data recorded during a series of controlled tests, with effort made to detect locational differences in pressure response around the four mile accelerator circumference. A review of the fluid mechanics associated with the system indicates linear time invariant models are suitable for the identification, particularly since the governing equations of one dimensional fluid flow are approximated by linear differential equations. An outline of the experimental design and the data acquisition system are given, followed by a detailed description of the modeling, which utilized the Matlab programming language and associated System Identification Toolbox. Two representations of the system are presented. One, a black box model, provides a multi-input, multi-output description assembled from the results of single input step function testing. This description indicates definite variation in pressure response with distance from the flow input location, and also suggests subtle differences in response with the input location itself. A second system representation is proposed which details the relation between continuous flow changes and pressure response, and provides explanation of a previously unappreciated pressure feedback internal to the system.

  19. Experimental Study of the Effects of the Cycle Characteristics on the Refrigerant-Induced Noise in System Air-Conditioner

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Weui Bong [Pusan National University, Busan (Korea, Republic of); Han, Hyung Suk; Mo, Jin Yong; Lee, Jae Kwon [Samsung Electronics, Suwon (Korea, Republic of)

    2007-07-15

    The main sources of the refrigerant-induced noise can be classified 2 types according to its characteristics. One is due to the cyclic characteristics such as quality, velocity of the refrigerant, pressure drop and mass flow rate. The other is due to the structural characteristics such as distributed path pipe layout, distributor and expansion device. In this paper, the effects of cycle characteristics on the noise of multi-type system air-conditioner are investigated experimentally. In the indoor unit of multi-type air-conditioner, the variation of noise is examined when the in-flowing and out-flowing refrigerant to the indoor unit are 2-phase state according to its cycle control. And several factors are recommended in order to reduce the refrigerant-induced noise of the air-conditioner.

  20. Measured impacts of supermarket humidity level on defrost performance and refrigerating system energy use

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, H.I.; Khattar, M.

    1999-07-01

    This paper presents field-monitor data from two supermarkets where the impact of space humidity on refrigerating system energy use was evaluated. Direct digital control (DDC) systems were used at both stores to collect 15-minute monitored data. At Store A in Minneapolis, the DDC system was used to monitor system performance as well as to implement temperature-terminated control in place of time-terminated control on 16 refrigerated zones using hot gas defrost. At Store B in Indianapolis, the DDC system was used to quantify the performance trends for the single compressor rack system with electric defrost. The results at Store B showed that refrigerating system energy use decreases by nearly 10 kWh/day for each 1% drop in space relative humidity, or about 0.4% of average annual system energy use. This value includes the impact of reduced latent loads, the reduction in direct energy use and imposed load from reduced electric defrost heater operation, and the smaller imposed load from reduced anti-sweat heater energy use. The measured reductions agree well with the impact predicted using the calculation methods developed by Howell (1933b) in ASHRAE Research Project 596. At Store A, the measured data show that implementing temperature-terminated defrost reduced refrigerating system energy use by nearly 70 kWh/day over the winter period when the average space humidity was 22% RH. The savings from temperature-terminated defrost increase by 4 kWh/day per each 1% drop in relative humidity. At both stores, the same type of mechanical controls were used to duty cycle the anti-sweat heaters based on store dew point. Anti-sweat heater electricity use was observed to decrease by 4.6 kWh/day at Store B and 3.4 kWh/day at Store A for each 1% drop in relative humidity. At Store A, a more aggressive control scheme was implemented with the DDC system that reduced anti-sweat heater energy use by 7.8 kWh/day per % RH. The more aggressive control approach was reported to properly

  1. Design of absorption system water-ammonia by using solar radiation as thermal source

    Energy Technology Data Exchange (ETDEWEB)

    Cavalcanti, Eduardo J. Cidade; Souza, Luiz Guilherme Meira [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Centro de Tecnlogia. Dept. de Engenharia Mecanica], E-mails: educanti@gmail.com, lguilherme@dem.ufrn.br

    2010-07-01

    An absorption refrigeration system with the single effect of par ammonia water with 1.758 kW (1 / 2 RT) cooling capacity was designed. The system was operating under conditions of 5 degree C evaporation and 45 degree C condensation temperature. The absorption system has a heat exchanger to improve performance. The heat source is the cylinder parabolic solar concentrator (CPC). The design of the concentrator was estimated based on experimental data of the pilot plant built in the Solar Energy Laboratory, Federal University of Rio Grande do Norte. The thermodynamic model with heat and mass transfer was made to the project areas of heat exchange (absorber) and consequent construction of the system. The rectifying column was modeling assuming that liquid is in equilibrium with the vapor state in all plate. The results should show the dimensions of the compact and allows a future assessment of the operational cost. (author)

  2. 46 CFR 154.1720 - Indirect refrigeration.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Indirect refrigeration. 154.1720 Section 154.1720... § 154.1720 Indirect refrigeration. A refrigeration system that is used to cool acetaldehyde, ethylene oxide, or methyl bromide, must be an indirect refrigeration system that does not use vapor compression....

  3. Design and Thermodynamic Analysis of a Steam Ejector Refrigeration/Heat Pump System for Naval Surface Ship Applications

    Directory of Open Access Journals (Sweden)

    Cüneyt Ezgi

    2015-12-01

    Full Text Available Naval surface ships should use thermally driven heating and cooling technologies to continue the Navy’s leadership role in protecting the marine environment. Steam ejector refrigeration (SER or steam ejector heat pump (SEHP systems are thermally driven heating and cooling technologies and seem to be a promising technology to reduce emissions for heating and cooling on board naval surface ships. In this study, design and thermodynamic analysis of a seawater cooled SER and SEHP as an HVAC system for a naval surface ship application are presented and compared with those of a current typical naval ship system case, an H2O-LiBr absorption heat pump and a vapour-compression heat pump. The off-design study estimated the coefficient of performances (COPs were 0.29–0.11 for the cooling mode and 1.29–1.11 for the heating mode, depending on the pressure of the exhaust gas boiler at off-design conditions. In the system operating at the exhaust gas boiler pressure of 0.2 MPa, the optimum area ratio obtained was 23.30.

  4. A decentralized control method for direct smart grid control of refrigeration systems

    DEFF Research Database (Denmark)

    Shafiei, Seyed Ehsan; Izadi-Zamanabadi, Roozbeh; Rasmussen, Henrik;

    2013-01-01

    A decentralized control method is proposed to govern the electrical power consumption of supermarket refrigeration systems (SRS) for demand-side management in the smart grid. The control structure is designed in a supervisory level to provide desired set-points for distributed level controllers....... No model information is required in this method. The temperature limits/constraints are respected. A novel adaptive saturation filter is also proposed to increase the system flexibility in storing and delivering the energy. The proposed control strategy is applied to a simulation benchmark that fairly...

  5. Potassium emission absorption system. Topical report 12

    Energy Technology Data Exchange (ETDEWEB)

    Bauman, L.E.

    1995-04-01

    The Potassium Emission Absorption System is one of the advanced optical diagnostics developed at Mississippi State University to provide support for the demonstration of prototype-scale coal-fired combustion magnetohydrodynamic (MHD) electrical power generation. Intended for application in the upstream of an MHD flow, the system directly measures gas temperature and neutral potassium atom number density through spectroscopic emission absorption techniques. From these measurements the electron density can be inferred from a statistical equilibrium calculation and the electron conductivity in the MHD channel found by use of an electron mobility model. The instrument has been utilized for field test measurements on MHD facilities for almost a decade and has been proven to provide useful measurements as designed for MHD nozzle, channel, and diffuser test sections. The theory of the measurements, a system description, its capabilities, and field test measurement results are reported here. During the development and application of the instrument several technical issues arose which when addressed advanced the state of the art in emission absorption measurement. Studies of these issues are also reported here and include: two-wavelength measurements for particle-laden flows, potassium D-line far wing absorption coefficient, bias in emission absorption measurements arising from dirty windows and misalignments, non-coincident multiwavelength emission absorption sampling errors, and lineshape fitting for boundary layer flow profile information. Although developed for NLHD application, the instrument could be applied to any high temperature flow with a resonance line in the 300 to 800 nm range, for instance other types of flames, rocket plumes or low temperature plasmas.

  6. Performance Evaluation of a Solar Adsorption Refrigeration System with a Wing Type Compound Parabolic Concentrator

    Directory of Open Access Journals (Sweden)

    Muhammad Umair

    2014-03-01

    Full Text Available Simulation study of a solar adsorption refrigeration system using a wing type compound parabolic concentrator (CPC is presented. The system consists of the wing type collector set at optimum angles, adsorption bed, a condenser and a refrigerator. The wing type collector captures the solar energy efficiently in the morning and afternoon and provides the effective temperature for a longer period of time compared to that achieved by a linear collector. The objectives of the study were to evaluate the system behavior, the effect of wing length, and to compare the performance of the systems with wing type and linear CPCs. A detailed dynamic simulation model was developed based on mass and energy balance equations. The simulation results show that the system performance with wing type CPC increases by up to 6% in the summer and up to 2% in the winter, compared to the performance with a linear CPC having same collector length. The ice production also increases up to 13% in the summer with the wing type CPC. This shows that the wing type CPC is helpful to increase the performance of the system compared to the linear CPC with the same collector length and without the need for tracking.

  7. R&D on The Cooling Systems Using Natural Refrigerants

    Science.gov (United States)

    Yanagi, Hideharu

    The use of waste heat of low temperatures is an important problem from the environmental considerations. Notice that adsorption cycles have a distinct advantage over other systems of their ability to produce cooling by using low waste heat as 60 to 80°C and also being absolutely benign for the environment. However the present available adsorption chillers are still heavier and larger in size. Hence their compactness and cost reduction as well as higher efficiency are urgent tasks for wider use. This review discusses recent development on adsorption heat pumps as well as forthcoming applications. The sources are mainly papers and discussions at the IEA Annex 24 Workshop in Turin, Italy (1999), FOA6 (Fundamental of Adsorption) Conference in Presquile de Giens, France (1998) and ISHPC (International Sorption Heat Pump Conference) in Munich, Germany (1999).

  8. Critical Research Needed to Examine the Environmental Impacts of Expanded Refrigeration on the Food System.

    Science.gov (United States)

    Heard, Brent R; Miller, Shelie A

    2016-11-15

    The unbroken global refrigerated supply chain, or cold chain, is rapidly expanding in developing countries. In addition to increasing the energy intensity of the food system, the expanded cold chain may facilitate changes in the global diet, food waste patterns, food production and distribution, and shopping habits. The sustainability impacts of many of these changes chain are unknown, given the complexity of interacting social, economic, and technical factors. The current literature surrounding the environmental impacts of refrigeration in the food system focuses on the direct impacts of energy use and coolant emissions, and lacks a critical evaluation of the accompanying systemic societal changes that potentially carry greater environmental impacts. This review examines the cold chain as a transformative technology, identifying key intrinsic, indirect, and external factors that will favorably, unfavorably, or ambiguously impact the environmental profile of the food system. The review identifies key interactions and feedbacks between the cold chain, food production and consumption decisions, infrastructure development, and the global environment which are largely unexamined and in need of empirical data. Viewing cold chain expansion from this broader perspective is essential to understanding the changing impacts of the food system in developing countries and may inform future sustainability planning.

  9. Mountain Plains Learning Experience Guide: Heating, Refrigeration, & Air Conditioning.

    Science.gov (United States)

    Carey, John

    This Heating, Refrigeration, and Air Conditioning course is comprised of eleven individualized units: (1) Refrigeration Tools, Materials, and Refrigerant; (2) Basic Heating and Air Conditioning; (3) Sealed System Repairs; (4) Basic Refrigeration Systems; (5) Compression Systems and Compressors; (6) Refrigeration Controls; (7) Electric Circuit…

  10. Suitability of commercially available laboratory cryogenic refrigerators to support shipboard electro-optical systems in the 10 - 77 Kelvin region

    Science.gov (United States)

    Hansen, R. G.; Byrd, E. A.

    1983-12-01

    The primary development of cryogenically cooled infrared systems was accomplished by FLIR systems designed for airborne, passive night vision. Essential to the development of these FLIR systems was a family of closed cycle refrigerators which had to meet a limited envelope requirement, utilize a nonlubricated compressor module, and be light in weight. Closed cycle refrigerators accomplished the same cooling function, they use modified oil lubricated reciprocating compressors which are limited in their axis of orientation to an angle of approximately 15-20 degrees maximum from horizon.

  11. Integrating giant microwave absorption with magnetic refrigeration in one multifunctional intermetallic compound of LaFe(11.6)Si(1.4)C(0.2)H(1.7).

    Science.gov (United States)

    Song, Ning-Ning; Ke, Ya-Jiao; Yang, Hai-Tao; Zhang, Hu; Zhang, Xiang-Qun; Shen, Bao-Gen; Cheng, Zhao-Hua

    2013-01-01

    Both microwave absorption and magnetocaloric effect (MCE) are two essential performances of magnetic materials. We observe that LaFe(11.6)Si(1.4)C(0.2)H(1.7) intermetallic compound exhibits the advantages of both giant microwave absorption exceeding -42 dB and magnetic entropy change of -20 Jkg(-1)K(-1). The excellent electromagnetic wave absorption results from the large magnetic loss and dielectric loss as well as the efficient complementarity between relative permittivity and permeability. The giant MCE effect in this material provides an ideal technique for cooling the MAMs to avoid temperature increase and infrared radiation during microwave absorption. Our finding suggests that we can integrate the giant microwave absorption with magnetic refrigeration in one multifunctional material. This integration not only advances our understanding of the correlation between microwave absorption and MCE, but also can open a new avenue to exploit microwave devices and electromagnetic stealth.

  12. Field Testing and Modeling of Supermarket Refrigeration Systems as a Demand Response Resource

    Energy Technology Data Exchange (ETDEWEB)

    Deru, Michael; Hirsch, Adam; Clark, Jordan; Anthony, Jamie

    2016-08-26

    Supermarkets offer a substantial demand response (DR) resource because of their high energy intensity and use patterns; however, refrigeration as the largest load has been challenging to access. Previous work has analyzed supermarket DR using heating, ventilating, and air conditioning; lighting; and anti-sweat heaters. This project evaluated and quantified the DR potential inherent in supermarket refrigeration systems in the Bonneville Power Administration service territory. DR events were carried out and results measured in an operational 45,590-ft2 supermarket located in Hillsboro, Oregon. Key results from the project include the rate of temperature increase in freezer reach-in cases and walk-ins when refrigeration is suspended, the load shed amount for DR tests, and the development of calibrated models to quantify available DR resources. Simulations showed that demand savings of 15 to 20 kilowatts (kW) are available for 1.5 hours for a typical store without precooling and for about 2.5 hours with precooling using only the low-temperature, non-ice cream cases. This represents an aggregated potential of 20 megawatts within BPA's service territory. Inability to shed loads for medium-temperature (MT) products because of the tighter temperature requirements is a significant barrier to realizing larger DR for supermarkets. Store owners are reluctant to allow MT case set point changes, and laboratory tests of MT case DR strategies are needed so that owners become comfortable testing, and implementing, MT case DR. The next-largest barrier is the lack of proper controls in most supermarket displays over ancillary equipment, such as anti-sweat heaters, lights, and fans.

  13. Fault Detection and Isolation for a Supermarket Refrigeration System - Part Two

    DEFF Research Database (Denmark)

    Yang, Zhenyu; Rasmussen, Karsten B.; Kieu, Anh T.;

    2011-01-01

    be isolated by using a bank of UIOs. Thereby, a complete FDI approach is proposed by combining the Extended-Kalman-Filter (EKF) and UIO methods, after an extensive comparison of KF-, EKF- and UIO-based FDI methods is carried out. The simulation tests show that the complete FDI approach has a good......The Fault Detection and Isolation (FDI) using the Unknown Input Observer (UIO) for a supermarket refrigeration system is investigated. The original system's state $T_{goods}$ (temp. of the goods) is regarded as a system unknown input in this study, so that the FDI decision is not disturbed...... by the system uncertainties relevant to this state dynamic and the original system disturbance $Q_{airload}$ (the thermal feature of the air). It has been observed that a single UIO has a very good detection capability for concerned sensor and parametric faults. However, only the parametric fault can...

  14. Foreign Examples of Energy Saving in Refrigerating Machine

    Energy Technology Data Exchange (ETDEWEB)

    Editor [Korea Energy Management Corporation, Yongin (Korea)

    2001-07-01

    Gram A/S Company of Denmark developed the low energy-consuming refrigerator for house, LER200. This refrigerator achieved lots of energy saving through improving insulation and cooling devices. As results from the research for one year and the field-testing for 120 housings, this refrigerator saved energy 70% more than the ordinary refrigerator and 40% more than most energy efficient refrigerators in Danish market. Such a type of household refrigerator consumes less than 0.3kWh of electricity at average for 24 hours. An energy saving refrigerating equipment that had been awarded a prize was established in Albany Port Authority Cold of Western Australia. The energy saving features in this equipment is under-floor heating system using heat recovery, an evaporative condenser, low energy consuming hot gas thawing devices, and computer control system. This is one of the first low temperature refrigerating systems using environment-friendly refrigerant. The refrigerating warehouse, which is located in the south 450km from Peth, has a stock of agricultural products for export. The energy saving characteristics of this project is to be applicable to other equipment and to have possibilities of a great energy saving in the application of refrigerating. Mitsubishi Heavy Industries, LTD and Miratomirai Geothermal Supply have collaborated the project that developed the absorption chiller, which had the same steam-consuming rate (3.9kg/h frozen ton) of the largest capacity (5000 frozen ton) of a steam turbine turbo chiller in the world through reexamining a heat reservoir since 1996. The new absorption chiller has begun to be operated after August 1999. Though actual test after operating, its freezing capacity and efficiency were validated to be more than the design specification. Asakawa sewage disposal plant of Hino in Tokyo Japan established a waste heat recovery system for scrubber water. This system has a heat exchanger to treat hot wastewater and an adsorption chiller to

  15. Research on rotary kiln surface heat absorption refrigeration technology%水泥回转窑筒体表面余热吸收式制冷技术研究

    Institute of Scientific and Technical Information of China (English)

    陈华东

    2014-01-01

    Cement production industry is a high energy consumption industry, and the loss rate of rotary kiln surface in whole imput en-ergy is high up to 10%. By setting heat gathering cover on rotary kiln surface, 100℃hot water can be gained. Using the hot water in lithium bromide absorption refrigeration unit, cooling capacity of 1 516 kW can be obtained. Compared with ordinary air-conditioning and electric compressor refrigeration technology, refrigeration by lithium bromide absorption refrigeration technology using rotary kiln surface waste heat can save 200,000 RMB every summer.%水泥生产是一个高耗能的行业,回转窑筒体表面的余热损失可达输入能量的10%。通过在回转窑表面布置集热罩,可得到平均温度为100℃的热水。这些热水用于溴化锂吸收式制冷机组,可以得到制冷量1516 kW,相较于普通空调和电动压缩机制冷技术,采用溴化锂吸收式制冷技术回收回转窑表面余热进行制冷每年夏天可以节省20万元左右电费。

  16. Noise Source Identification of Small Fan-BLDC Motor System for Refrigerators

    Directory of Open Access Journals (Sweden)

    Yong-Han Kim

    2006-01-01

    Full Text Available Noise levels in household appliances are increasingly attracting attention from manufacturers and customers. Legislation is becoming more severe on acceptable noise levels and low noise is a major marketing point for many products. The latest trend in the refrigerator manufacturing industry is to use brushless DC (BLDC motors instead of induction motors in order to reduce energy consumption and noise radiation. However, cogging torque from BLDC motor is an undesirable effect that prevents the smooth rotation of the rotor and results in noise. This paper presents a practical approach for identifying the source of excessive noise in the small fan-motor system for household refrigerators. The source is presumed to a mechanical resonance excited by torque ripple of the BLDC motor. By using finite element analysis, natural frequencies and mode shapes of the rotating part of the system are obtained and they are compared with experimental mode shapes obtained by electronic torsional excitation test which uses BLDC motor itself as an exciter. Two experimental validations are carried out to confirm the reduction of excessive noise.

  17. Numerical investigation of an R744 liquid ejector for supermarket refrigeration systems

    Directory of Open Access Journals (Sweden)

    Haida Michal

    2016-01-01

    Full Text Available This paper presents a numerical investigation of an R744 liquid ejector applied to a supermarket refrigeration system. The use of the liquid ejector enables the operation of the evaporator in a flooded mode and recirculates the R744 liquid phase, which improves the energy efficiency of the refrigeration system. The investigation was performed using two ejectors of different sizes installed in a multi-ejector block. The numerical model was formulated based on the homogenous equilibrium model and validated with the experimental results. The influence of the pre-mixer, mixer and diffuser dimensions on the ejector performance measured using the mass entrainment ratio is presented. The results show that the best liquid ejector performance was obtained for the short lengths of the pre-mixer and mixer compared to the broadly investigated two-phase ejectors connected to the evaporator port. In addition, wide diffuser angles improved the mass entrainment ratio of both liquid ejectors, which may lead to a reduction in the diffuser length.

  18. Fault Detection and Isolation for a Supermarket Refrigeration System - Part One

    DEFF Research Database (Denmark)

    Yang, Zhenyu; Rasmussen, Karsten B.; Kieu, Anh T.;

    2011-01-01

    Fault Detection and Isolation (FDI) using the Kalman Filter (KF) technique for a supermarket refrigeration system is explored. Four types of sensor fault scenarios, namely drift, offset, freeze and hard-over, are considered for two temperature sensors, and one type of parametric fault scenario, n....... The test results show that the EKF-based FDI method generally performances better and faster than the KF-based method does. However, both methods can not handle the isolation between sensor faults and parametric fault.......Fault Detection and Isolation (FDI) using the Kalman Filter (KF) technique for a supermarket refrigeration system is explored. Four types of sensor fault scenarios, namely drift, offset, freeze and hard-over, are considered for two temperature sensors, and one type of parametric fault scenario...... isolation purpose, a bank of KFs arranged by splitting measurements is constructed for sensor fault isolation, while the Multi-Model Adaptive Estimation (MMAE) method is employed to handle parametric fault isolation. All these approaches are extended and checked by using Extended KF technique afterwards...

  19. Malone refrigeration

    Science.gov (United States)

    Swift, G. W.

    Malone refrigeration is the use of a liquid near its critical point, without evaporation, as the working fluid in a refrigeration cycle such as the Stirling cycle. We discuss relevant properties of appropriate liquids, and we describe two Malone refrigerators. The first, which was completed several years ago, established the basic principles of use for liquids in such cycles. The second, now under construction, is a linear, free-piston machine.

  20. Refrigerating machine operating characteristics under various mixed refrigerant mass charges

    Energy Technology Data Exchange (ETDEWEB)

    Rozhentsev, Andrey [Far Eastern State Transport University of the Russian Federation, Seryshev street, 47, 680021 Khabarovsk (Russian Federation)

    2008-11-15

    This paper reports the results of experimental investigation of a low-temperature Joule-Thomson refrigerating machine, working by use of a non-azeotropic mixture of refrigerants and with a single-stage hermetic compressor. The temperature, hydraulic and power performance of the machine are determined experimentally in relation to the mixed refrigerant (MR) mass charge. Variations of the MR refrigerating machine operating performance with the working mixture mass charge are found to be considerably different from the analogous performance variations of a refrigerating machine charged with a pure refrigerant. The peculiarities of those relationships are analyzed theoretically. The specific value of a minimum acceptable MR mass charge for the investigated system and its correlation with internal processes in the machine loop are established as well. If the refrigerant mixture mass charges are below the minimum ones, the temperature and power performance of the MR machine differ essentially from the design performance and such operating modes are considered inadmissible. (author)

  1. Research on a New Type of Solar-driven Air-cooled NH3H2O Absorption Refrigeration Cycle%新型太阳能风冷氨水吸收式制冷循环的研究

    Institute of Scientific and Technical Information of China (English)

    任秀宏; 王林

    2012-01-01

    A new type of solar-driven air-cooled NH3H2O absorption refrigeration cycle was proposed. It have rectification e-quipment for purifying ammonia steam and recovers heat from rectifier and absorber. By these realizing small size, air - cooled and the effective use of solar energy. So the coefficient of performance (COP) is increased compared with traditional models. Based on energy conservation, solution mass conservation and ammonia components mass conservation,the thermodynamic math-ematic model of each component is established. Then cycle performance is calculated by writing programs. The effect of main operation parameters(heat source temperature, evaporating temperature,condensing temperature)on the coefficient of performance ( COP) was studied, laying the foundation for optimization design and operation of refrigeration system.%提出一种新型太阳能风冷氨水吸收式制冷循环系统,该系统设置精馏器提纯氨蒸汽,并有效回收精馏器精馏热及中温吸收器吸收热,实现对太阳能的有效利用以及机组风冷化和小型化,与传统系统相比其系统性能系数(COP)显著提高.基于能量守恒、溶液质量守恒和氨组分质量守恒建立系统各部件热力学数学模型,在此基础上编写程序对系统循环特性进行理论计算,分析热源温度、蒸发温度、冷凝温度等参数对系统COP的影响,为系统优化设计及建立最优运行方案提供理论支持.

  2. Performance Characteristics of Absorption Hybrid Cycle Introduced Compressor

    Science.gov (United States)

    Iyoki, Shigeki; Kotani, Yuji; Uemura, Tadashi

    In this paper, four kinds of absorption hybrid cycle which introduced the compressor in the absorption cycle were proposed. As basic cycle of absorption refrigerating machine, the following were chosen: two kinds of single-stage absorption refrigerating machine and two kinds of double effect absorption refrigerating machine. As a working medium-absorbent system, NH3-H2O system, C2H5NH2-H2O system and C2H5NH2-H2O-LiBr system were adopted. Using these three kinds of working medium-absorbent system, the performance characteristics of four kinds of absorption hybrid cycle were simulated. And the performance characteristics of these cycles were compared.

  3. Evaluation of a solar intermittent refrigeration system for ice production operating with ammonia/lithium nitrate

    Energy Technology Data Exchange (ETDEWEB)

    Rivera, W.; Moreno-Quintanar, G.; Best, R. [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico, A.P. 34, 62580 Temixco, Mor. (Mexico); Rivera, C.O.; Martinez, F. [Facultad de Ingenieria Campus Coatzacoalcos, Universidad Veracruzana, Av. Universidad Km 7.5, 96530 Coatzacoalcos, Ver. (Mexico)

    2011-01-15

    A novel solar intermittent refrigeration system for ice production developed in the Centro de Investigacion en Energia of the Universidad Nacional Autonoma de Mexico is presented. The system operates with the ammonia/lithium nitrate mixture. The system developed has a nominal capacity of 8 kg of ice/day. It consists of a cylindrical parabolic collector acting as generator-absorber. Evaporator temperatures as low as -11 C were obtained for several hours with solar coefficients of performance up to 0.08. It was found that the coefficient of performance increases with the increment of solar radiation and the solution concentration. A dependency of the coefficient of performance was not founded against the cooling water temperature. Also it was found that the maximum operating pressure increases meanwhile the generation temperature decreases with an increase of the solution concentration. (author)

  4. Energy-optimal speed control of fans and compressor in a refrigeration system

    DEFF Research Database (Denmark)

    Jakobsen, Arne; Rasmussen, Bjarne D.

    1998-01-01

    Use of variable speed compressors and variable speed fans for both the evaporator and the condenser makes the refrigeration system more flexible, adds to the degree of freedom of the control system and therefore makes it possible to (on-line) optimise the various speeds involved. Say, for example...... choosing the combination of compressor speed, evaporator fan and condenser fan speeds which minimises the total power consumption of the motors involved. A system and integrated control viewpoint is necessary as a “component-oriented” and “single-loop-control” approach will not lead to the discovery...... that the cooling capacity must be increased due to increased cooling load. This can be done by increasing the compressor speed and/or the evaporator fan speed and also to some extent by increasing the condenser fan speed. The general control problem is to obtain the desired temperature of the cooled air, while...

  5. Stirling Refrigerator

    Science.gov (United States)

    Kagawa, Noboru

    A Stirling cooler (refrigerator) was proposed in 1862 and the first Stirling cooler was put on market in 1955. Since then, many Stirling coolers have been developed and marketed as cryocoolers. Recently, Stirling cycle machines for heating and cooling at near-ambient temperatures between 173 and 400K, are recognized as promising candidates for alternative system which are more compatible with people and the Earth. The ideal cycles of Stirling cycle machine offer the highest thermal efficiencies and the working fluids do not cause serious environmental problems of ozone depletion and global warming. In this review, the basic thermodynamics of Stirling cycle are briefly described to quantify the attractive cycle performance. The fundamentals to realize actual Stirling coolers and heat pumps are introduced in detail. The current status of the Stirling cycle machine technologies is reviewed. Some machines have almost achieved the target performance. Also, duplex-Stirling-cycle and Vuilleumier-cycle machines and their performance are introduced.

  6. 5-year operation experience with the 1.8 K refrigeration units of the LHC cryogenic system

    CERN Document Server

    Ferlin, G; Claudet, S; Pezzetti, M

    2015-01-01

    Since 2009, the Large Hadron Collider (LHC) is in operation at CERN. The LHC superconducting magnets distributed over eight sectors of 3.3-km long are cooled at 1.9 K in pressurized superfluid helium. The nominal operating temperature of 1.9 K is produced by eight 1.8-K refrigeration units based on centrifugal cold compressors (3 or 4 stages depending to the vendor) combined with warm volumetric screw compressors with sub-atmospheric suction. After about 5 years of continuous operation, we will present the results concerning the availability for the final user of these refrigeration units and the impact of the design choice on the recovery time after a system trip. We will also present the individual results for each rotating machinery in terms of failure origin and of Mean Time between Failure (MTBF), as well as the consolidations and upgrades applied to these refrigeration units.

  7. Numerical optimization of a transcritical CO2/propylene cascaded refrigeration-heat pump system with economizer in HT cycle

    Indian Academy of Sciences (India)

    Alok Manas Dubey; Suresh Kumar; Ghanshyam Das Agrawal

    2015-04-01

    Use of organic refrigerants such as Hydrochlorofluorocarbons and Chlorofluorocarbons have been criticized for their adverse impact on the Earth's protective ozone layer and for their significant global warming potential (GWP). CO2 has been receiving great concern as an alternative refrigerant. Cascade refrigeration systems employing CO2 are used for low temperature applications. Being a low critical temperature fluid CO2 transcritical cascade systems offer low COP for a given application. Parallel compression economization is one of the promising cycle modifications to improve the COP of transcritical CO2 cascaded systems. In this paper, transcritical CO2/propylene cascade system with parallel compression economization in the HT cycle has been analysed for cooling/heating applications. An enhancement in COP of 9% has been predicted. Thermodynamic analysis on R744-R1270 cascade refrigeration system has been performed to determine the optimal value of the various design parameters of the system. The design parameters included are: gas cooler outlet temperature and intermediate temperature in the high temperature circuit and evaporator temperature and temperature difference in the cascade condenser in the low temperature circuit.

  8. Performance Evaluation of a Lithium-Chloride Absorption Refrigeration and an Assessment of Its Suitability for Biomass Waste Heat

    Directory of Open Access Journals (Sweden)

    Sacha Oberweis

    2012-10-01

    Full Text Available This paper presents a computer model that will evaluate the performance of a thermo-chemical accumulator. The model is based on operational data such as temperatures and flow rates. The ultimate goal for this model is to estimate the coefficient of performance (COP of this unit when run on hot water from biomass combustion as the heat source. The outputs of the model are verified by comparing the simulation of the actual machine with published experimental data. The computed results for cooling COP are within 10% of the measured data. The simulations are all run for heat load temperatures varying between 80 °C and 110 °C. As expected, simulation results showed an increase in COP with increased heat source temperatures. The results demonstrate that the potential of combined solar and biomass combustion as a heat source for absorption cooling/heating in climates with low solar radiation can be coupled with biomass waste.

  9. Refrigerated display cabinets; Butikskyla

    Energy Technology Data Exchange (ETDEWEB)

    Fahlen, Per

    2000-07-01

    This report summarizes experience from SP research and assignments regarding refrigerated transport and storage of food, mainly in the retail sector. It presents the fundamentals of heat and mass transfer in display cabinets with special focus on indirect systems and secondary refrigerants. Moreover, the report includes a brief account of basic food hygiene and the related regulations. The material has been compiled for educational purposes in the Masters program at Chalmers Technical University.

  10. Theoretical analysis of a CO-NH cascade refrigeration system for cooling applications at low-temperatures

    OpenAIRE

    2009-01-01

    Theoretical analysis of a CO2-NH3 cascade refrigeration system for cooling applications at low-temperatures correspondance: Corresponding author. Tel.: +34 986 812605; fax: +34 986 811995. (Fernandez-Seara, Jose) (Fernandez-Seara, Jose) Area de Maquinas y Motores Termicos--> , E.T.S. de Ingenieros Industriales--> , University of Vigo--> , Campus Lagoas-Marcosende No 9--> , 36310 Vigo--> ...

  11. Absorption refrigeration cycle driven by waste heat using R124-DMAC as working fluids%基于R124-DMAC为工质对的余热吸收式制冷

    Institute of Scientific and Technical Information of China (English)

    李星; 徐士鸣; 李见波

    2015-01-01

    Energy saving and emission reduction technologies for vehicles have been paid more attention in recent years, and it is necessary to investigate how to efficiently recover and utilize the waste heat from vehicle engines to drive automotive air conditioning system. Based on that, a full air-cooled bubble absorption refrigeration test system with 3 kW cooling capacity driven by waste heat, using R124-DMAC as working fluids was designed and built. In the system, engine exhaust gas was simulated by heated air. Operating parameters were tested through changing heat source temperature, chilled water temperature and pump flow rate. The maximum COP of the system could reach 0.54 under the condition of generator temperature 100℃ and evaporating temperature−4℃. Heat source and chilled water temperatures had an important effect on cooling capacity and COP, and this system had good stability. However when evaporating temperature was below 5℃, a rectification unit should be considered in order to improve cooling effects. Additionally, this experiment proved that the air-cooled bubble absorber worked well, providing theoretical support for the refrigeration system driven by waste heat in vehicle air conditioning.%设计并搭建了制冷量为3 kW、以R124-DMAC为工质、采用电热高温空气模拟发动机排气废热的空冷鼓泡吸收制冷实验系统,通过改变热空气进口温度、冷冻水温度和浓溶泵流率测试系统工作参数的变化趋势。实验结果表明,当发生器稀溶液出口温度约为100℃时,蒸发温度为−4℃,系统COP值最大可达到约0.54,而且实验系统稳定性较好;影响系统制冷量和COP值的主要参数是热空气进口温度和冷冻水温度;当蒸发温度低于5℃时,为了提高制冷效果需考虑设置精馏装置。

  12. Design and fabrication of a 3-D printable counter-low/precipitation heat exchanger for use with a novel off-grid solid state refrigeration system

    Science.gov (United States)

    Ryan, Sean Thomas

    Off-grid refrigeration technologies are currently limited to either vapor-compression cycles driven by photovoltaics or solar thermal absorption cycles. Rebound Technologies has recently developed a novel off-grid refrigeration system called Sunchill(TM) for agricultural applications in humid environments in the developing world. The Sunchill(TM) refrigeration system utilizes the daily high and low temperatures to drive a 24 hour refrigeration cycle. Cooling is provided by the dissolution of an endothermic salt, sodium carbonate decahydrate. Once the salt is solvated and cooling is delivered to freshly harvest crops, the system is "recharged" in a multi-step process that relies on a solar collector, an air-gap membrane unit and a heat exchanger. The heat exchanger, which is the focus of this thesis, is required to remove 36.6 MJ of heat over a twelve hour period in order to "recharge" the system. The heat exchanger is also required to transfer heat from a fresh water stream to a cold brine solution to generate the cold water necessary to submerse and cool harvested crops. To provide a sustainable technology to the target community, the feasibility of fabricating the heat exchanger via the low cost 3-D printing method of fused filament fabrication (FFF) was examined. This thesis presents the design, development, and manufacturing considerations that were performed in support of developing a waterproof, counter-flow, 3-D printable heat exchanger. Initial geometries and performance were modeled by constructing a linear thermal resistance network with truncating temperatures of 30°C (saturated brine temperature) and 18°C (average daily low temperature). The required surface area of the heat exchanger was found to be 20.46 m2 to remove the required 36.6 MJ of heat. Iterative print tests were conducted to arrive at the wall thickness, hexagon shape, and double wall structure of the heat exchanger. A laboratory-scale heat exchanger was fabricated using a Lulzbot Taz 4

  13. Energy optimisation of domestic refrigerators

    DEFF Research Database (Denmark)

    Jakobsen, Arne; Rasmussen, Bjarne D.

    1998-01-01

    This paper describes the main results of a research project with the objective of reducing the energy consumption of domestic refrigerators by increasing the efficiency of the refrigeration system. The improvement of the system efficiency was to be obtained by:1) Introducing continuous operation...... by using a variable speed compressor for controlling the capacity of the refrigeration system.2) Introducing a variable speed fan for enhancing the heat transfer in the evaporator.It was the aim of the project to reduce the energy consumption of a standard refrigerator, available on the market today, by 50 %....

  14. 2nd Biennial Conference on Refrigeration for Cryogenic Sensors and Electronic Systems

    CERN Document Server

    1983-01-01

    This proceedings documents the output of the Second Biennial Conference on Refrigeration for Cryogenic Sensors and Electronic Systems held at the National Aeronautics and Space Administration's Goddard Space Flight Center, Greenbelt, Maryland, on December 7-8, 1982. Building on the first open meeting hosted by the National Bureau of Standards in 1980, the focus of this second meeting was again on low-temperature, closed-cycle cooler technology. However, higher temperature coolers (77 K), with technology applicable to the low temperature coolers, were considered to be within the scope of this meeting. This second conference consisted of 30 papers presented by representatives of industry, government, and academia. The conference proceedings reproduced here was published by the NASA Goddard Space Flight Center in Greenbelt Maryland as NASA Conference Publication 2287.

  15. Development of GM cryocooler separate type liquid-helium-free 3He-4He dilution refrigerator system

    Science.gov (United States)

    Yamanaka, Y.; Ito, T.; Umeno, T.; Suzuki, Y.; Yoshida, S.; Kamioka, Y.; Maehata, K.

    2009-02-01

    We developed the new liquid-helium-free dilution refrigerator system, in which the Gifford-McMahon (GM) cycle cryocooler and dilution refrigerator (DR) unit are separated. We obtained the base temperature below 50 mK in this DR system. In usual liquid-helium-free DR systems, the DR unit directly couples with GM-cryocooler in the same vacuum chamber. Therefore the mechanical vibration of GM-cryocooler is hardly removed from DR unit. In order to eliminate the vibration problem, the separated vacuum chamber contacting the GM-cryocooler is connected with the DR unit chamber by the flexible hose with length of about 1 meter. Thin flexible tubes used for circulation of the refrigerant gas and radiation shield are installed in the connection hose. The 4He gas, cooled in the GM-cryocooler unit, transfers to the DR unit throw the thin flexible tubes. After cooling the DR unit, the gas returns to GM-cryocooler unit with cooling of the radiation shield. We expect that our separate-type dilution refrigerator becomes a useful piece of apparatus for the low temperature experiments.

  16. Development of GM cryocooler separate type liquid-helium-free {sup 3}He-{sup 4}He dilution refrigerator system

    Energy Technology Data Exchange (ETDEWEB)

    Yamanaka, Y; Ito, T; Umeno, T; Suzuki, Y; Yoshida, S; Kamioka, Y [Taiyo Nippon Sanso Corporation, 10 Okubo, Tsukuba-shi, 300-2611 (Japan); Maehata, K [Department of Applied Quantum Physics and Nuclear Engineering, Kyushu University, Fukuoka-shi, 819-0395 (Japan)], E-mail: Yoshihiro.Yamanaka@tn-sanso.co.jp

    2009-02-01

    We developed the new liquid-helium-free dilution refrigerator system, in which the Gifford-McMahon (GM) cycle cryocooler and dilution refrigerator (DR) unit are separated. We obtained the base temperature below 50 mK in this DR system. In usual liquid-helium-free DR systems, the DR unit directly couples with GM-cryocooler in the same vacuum chamber. Therefore the mechanical vibration of GM-cryocooler is hardly removed from DR unit. In order to eliminate the vibration problem, the separated vacuum chamber contacting the GM-cryocooler is connected with the DR unit chamber by the flexible hose with length of about 1 meter. Thin flexible tubes used for circulation of the refrigerant gas and radiation shield are installed in the connection hose. The {sup 4}He gas, cooled in the GM-cryocooler unit, transfers to the DR unit throw the thin flexible tubes. After cooling the DR unit, the gas returns to GM-cryocooler unit with cooling of the radiation shield. We expect that our separate-type dilution refrigerator becomes a useful piece of apparatus for the low temperature experiments.

  17. Thermodynamic optimization of mixed refrigerant Joule- Thomson systems constrained by heat transfer considerations

    Science.gov (United States)

    Hinze, J. F.; Klein, S. A.; Nellis, G. F.

    2015-12-01

    Mixed refrigerant (MR) working fluids can significantly increase the cooling capacity of a Joule-Thomson (JT) cycle. The optimization of MRJT systems has been the subject of substantial research. However, most optimization techniques do not model the recuperator in sufficient detail. For example, the recuperator is usually assumed to have a heat transfer coefficient that does not vary with the mixture. Ongoing work at the University of Wisconsin-Madison has shown that the heat transfer coefficients for two-phase flow are approximately three times greater than for a single phase mixture when the mixture quality is between 15% and 85%. As a result, a system that optimizes a MR without also requiring that the flow be in this quality range may require an extremely large recuperator or not achieve the performance predicted by the model. To ensure optimal performance of the JT cycle, the MR should be selected such that it is entirely two-phase within the recuperator. To determine the optimal MR composition, a parametric study was conducted assuming a thermodynamically ideal cycle. The results of the parametric study are graphically presented on a contour plot in the parameter space consisting of the extremes of the qualities that exist within the recuperator. The contours show constant values of the normalized refrigeration power. This ‘map’ shows the effect of MR composition on the cycle performance and it can be used to select the MR that provides a high cooling load while also constraining the recuperator to be two phase. The predicted best MR composition can be used as a starting point for experimentally determining the best MR.

  18. NH3/CO2 Supermarket Refrigeration System with CO2 in the Cooling and Freezing Section. Technical, Energetic and Economical Issues

    Energy Technology Data Exchange (ETDEWEB)

    Van Riessen, G. J.

    2004-08-01

    The application of the natural refrigerant CO2 in combination with NH3 has shown a large increase in industrial refrigeration over the last few years. Until April 2004, all supermarkets in the Netherlands were still working with systems using the environmentally harmful HFCs (greenhouse gases) or even HCFCs (ozone depleting substances). The advantages of a CO2 supermarket system seem to be overshadowed by fear of owners of supermarkets and installers for an unfamiliar system with higher installation costs. The natural refrigerants NH3 and CO2 are now introduced in the Dutch commercial refrigeration. The first supermarket refrigeration system in the Netherlands with only natural refrigerants has become operational in March 2004 and is located in Bunschoten. The NH3/CO2 cascade system has NH3 as primary refrigerant evaporating at -16C in two parallel cascade heat exchangers, where CO2 is condensing at -12C. One CO2 circuit is used for the cooling, which is an innovation for supermarket refrigeration. From the cascade heat exchanger, CO2 is pumped into the cooling section. In the other CO2 circuit, direct expansion and a CO2 compressor provides the freezing section with CO2 of -30C. The most experiments with CO2 in supermarkets in Europe have been restricted to the application of CO2 in the freezing section. Therefore, the application of CO2 as a phase changing secondary refrigerant in the cooling section is an interesting innovation. The technical, energetic and economical aspects of the installation are considered. The technical operation of the cascade refrigeration system in a supermarket is discussed. The energy savings are calculated and the installation and running costs evaluated. Experiences and problems during the installation and control of the installation will be discussed.

  19. Cogeneration in breweries analysis and simulation of systems for simultaneous generation of power, heat and refrigeration using natural gas; Sistemas de refrigeracao a partir da cogeracao: analise e simulacao de propostas para o caso de cervejarias utilizando gas natural

    Energy Technology Data Exchange (ETDEWEB)

    Gallego, Antonio Garrido

    1998-07-01

    The present work analyses some proposals of cogeneration systems for the simultaneous generation of power, heat and refrigeration in a brewery. The requirements of steam, refrigeration and electricity, as well as the production of beer in a plant of the Antarctica Company, located in Jaguariuna - SP were collected monthly for the year of 1997. Three conceptions of systems using two gas turbines with heat recovery steam generator were then proposed to meet the surveyed demand. The proposals differ in the refrigeration system: the first one uses a traditional ammonia compression system while the second uses an ammonia absorption system, the third proposal is a combination of the compression and absorption systems. These proposals are compared to the present configuration which purchases electricity from the Public Utility for power and refrigeration (using an ammonia compression)system, and fuel oil to generate steam for process heat. The technical, economical and environmental feasibility of the proposals, as well as of the present configuration are discussed on the basis of mass balances, energy balances (first law of Thermodynamics), exergy fluxes (second law analysis), operational and capital cost, based on simulation of the performance of each configuration proposed to meet the monthly electricity, steam and refrigeration requirements for the referred plant. The turbines were chosen so as to meet the peek energy demand of the plant and two cases were simulated for each proposal: turbine operational meets only the demand of the plant and turbine operates at full load, selling electricity for the Public utility. Results obtained show that the current operational costs are higher than any of the proposals presented. The high capital costs of the proposals, though,make them less interesting financially. The simulation of the case of excess electricity to the Public Utility is very attractive, considering the cost of natural gas 3,38 U$/M btu and the fare of 40 U

  20. Open absorption system for cooling and air conditioning using membrane contactors. 2006 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Conde-Petit, M. [M. Conde Engineering, Zuerich (Switzerland); Weber, R. [Materials Science and Technology (EMPA), Abteilung Bautechnologien, Duebendorf (Switzerland)

    2006-11-15

    This illustrated annual report for 2006 for the Swiss Federal Office of Energy (SFOE) reports on work being done on the development of an open absorption system for cooling and air-conditioning. The report reviews the construction of a first prototype and the manufacture of its components. The conceptual design of this new type of air handling unit (AHU), operating with a liquid desiccant, is discussed. The AHU is to be autonomous and the system will not require additional mechanical refrigeration. It is to be thermally driven at temperatures below 80 {sup o}C. Waste heat sources, solar collectors, district heating plants and co-generation systems are targeted as providers of thermal energy at this temperature level. Work carried out is reported on, including that on two-stream membrane contactors.

  1. Equivalent Temperature-Enthalpy Diagram for the Study of Ejector Refrigeration Systems

    Directory of Open Access Journals (Sweden)

    Mohammed Khennich

    2014-05-01

    Full Text Available The Carnot factor versus enthalpy variation (heat diagram has been used extensively for the second law analysis of heat transfer processes. With enthalpy variation (heat as the abscissa and the Carnot factor as the ordinate the area between the curves representing the heat exchanging media on this diagram illustrates the exergy losses due to the transfer. It is also possible to draw the paths of working fluids in steady-state, steady-flow thermodynamic cycles on this diagram using the definition of “the equivalent temperature” as the ratio between the variations of enthalpy and entropy in an analyzed process. Despite the usefulness of this approach two important shortcomings should be emphasized. First, the approach is not applicable for the processes of expansion and compression particularly for the isenthalpic processes taking place in expansion valves. Second, from the point of view of rigorous thermodynamics, the proposed ratio gives the temperature dimension for the isobaric processes only. The present paper proposes to overcome these shortcomings by replacing the actual processes of expansion and compression by combinations of two thermodynamic paths: isentropic and isobaric. As a result the actual (not ideal refrigeration and power cycles can be presented on equivalent temperature versus enthalpy variation diagrams. All the exergy losses, taking place in different equipments like pumps, turbines, compressors, expansion valves, condensers and evaporators are then clearly visualized. Moreover the exergies consumed and produced in each component of these cycles are also presented. The latter give the opportunity to also analyze the exergy efficiencies of the components. The proposed diagram is finally applied for the second law analysis of an ejector based refrigeration system.

  2. ALTERNATIVE REFRIGERANT R-134A

    Directory of Open Access Journals (Sweden)

    Rasim KARABACAK

    1997-03-01

    Full Text Available Because of the big damages on the ozone layer given by the refrigerants cloroflorocarbons that has been used up to now, new alternative gases should be developped and product at once. In this study, some informations about alternative to presently used CFCs, R-134A refrigerant's characteristics and its suitability to cooling systems is given. As it would be understood from these informations there is no objection on using alternative R-134A refrigerant

  3. Theoretical studies on new refrigerant in refrigeration system for freeze and cold storage%用于冷冻冷藏制冷系统的新型制冷剂的理论研究

    Institute of Scientific and Technical Information of China (English)

    高赞军; 徐英杰; 仇宇; 李鹏; 韩晓红; 陈光明

    2012-01-01

    综述在冷冻冷藏系统中制冷剂替代研究的现状.在此基础上,提出一种新的混合制冷剂(HFG-161/HFC-125/HFC-143a,15/45/40)用于替代HFC-404A,该新型制冷剂的ODP为零,GWP比HFC-404A和R507A要小,其基本热力学性能与HFC-404A相近.对新型混合制冷剂和HFC-404A的循环性能进行理论分析与比较.结果表明,新型混合制冷剂的性能要比HFC-404A优越,环境性能更好,是HFC-404A潜有力的替代制冷剂.%The research status on refrigerant substitute for the freeze and cold storage system is reviewed. Based on this,a new ternary non-azeotropic mixture of HFC-161/HFC-125/HFC-143a( 15/45/40) as a promising mixed refrigerant to HFO404A is presented. The ODP of the new refrigerant is zero and its basic thermodynamic properties are similar to those of HFC-404A,and its GWP is much smaller than that of R507A or HFC-404A. The cycle performance between the new mixture refrigerant and HFC-404A is theoretically analyzed and compared. The results show that the cycle performance and environmental performance of the new mixture refrigerant are better than those of HFC-404A. The new mixture refrigerant may be a promising alternative refrigerant for HFC-404A.

  4. Mathematical modelling of supermarket refrigeration systems for design, energy prediction and control

    Energy Technology Data Exchange (ETDEWEB)

    Ge, Y.T.; Tassou, S.A. [Brunel Univ., Dept. of Mechanical Engineering, Uxbridge (United Kingdom)

    2000-04-01

    This paper describes a mathematical model developed to simulate the performance of supermarket refrigeration systems. Such a model can be used for the comparison of different systems and control strategies in terms of their energy and total equivalent warming impact. The model is based on a larger number of component models which have been linked together within the TRNSYS environment. Major component models include the compressor, air-cooled condenser, thermostatic expansion valve, display cabinet and control. The overall system model has been validated against monitored data obtained from both a laboratory-based system and a full-scale system in a supermarket in Scotland. The value of the model is illustrated by determining and comparing the effectiveness of head pressure and variable-speed control against fixed head pressure and constant speed control. It is shown that even at summer ambient conditions the system can be operated without problems at much lower head pressures than is done in practice under fixed-pressure control strategies. The use of variable-speed control on one of the compressors can also provide better control of the suction pressure and a substantial (up to 23 per cent) energy savings compared to on-off control. (Author)

  5. Theoretical study of heat pump system using CO2/dimethylether as refrigerant

    Directory of Open Access Journals (Sweden)

    Fan Xiao-Wei

    2013-01-01

    Full Text Available Nowadays, HCFC22 is widely used in heat pump systems in China, which should be phased out in the future. Thus, eco-friendly mixture CO2/dimethylether is proposed to replace HCFC22. Compared with pure CO2 and pure dimethylether, the mixture can reduce the heat rejection pressure, and suppress the flammability and explosivity of pure dimethylether. According to the Chinese National Standards on heat pump water heater and space heating system, performances of the subcritical heat pump system are discussed and compared with those of the HCFC22 system. It can be concluded that CO2 /dimethylether mixture works efficiently as a refrigerant for heat pumps with a large heat-sink temperature rise. When mass fraction of dimethylether is increased, the heat rejection pressure is reduced. Under the nominal working condition, there is an optimal mixture mass fraction of 28/72 of CO2/dimethylether for water heater application under conventional condensation pressure, 3/97 for space heating application. For water heater application, both the heating coefficient of performance and volumetric heating capacity increase by 17.90% and 2.74%, respectively, compared with those of HCFC22 systems. For space heating application, the heating coefficient of performance increases by 8.44% while volumetric heating capacity decreases by 34.76%, compared with those of HCFC22 systems. As the superheat degree increases, both the heating coefficient of performance and volumetric heating capacity tend to decrease.

  6. Energy consumption of cooling systems. Optimization of the energy consumption of the cooling system in electric refrigerators; Energiforbrug i koelesystemer. Optimering af energiforbruget i koelesystemer i eldrevne koeleskabe

    Energy Technology Data Exchange (ETDEWEB)

    Danig, P.O. [Danmarks Tekniske Universitet (Denmark); Pedersen, J.K.; Ritchie, E. [Aalborg Universitet (Denmark); Kierkegaard, P. [CETEC E/F (Denmark)

    1997-12-31

    The aim of the project was to determine an energy optimum solution for household refrigerators comprising the whole system from electric power supply to the cooled food. The basic idea was to replace the normal ON/OFF control with continuous operation, but so that the engine`s speed of rotation and thereby the performance of the compressor should be controlled according to the cooling demand. A 325 l Gram refrigerator model KS350 was used in the experiments and as a reference. In conventional operation - with a 3,13 cm{sup 3} compressor using ON/OFF control - this refrigerator on average used 33 W at the ISO point (ISO 7371 standard). The most important technical results are that continuous operation of refrigerators uses substantial less energy than ON/OFF control, and that this mode of operation improves the quality of the stored food. A compressor which is small enough to even a refrigerator of the size of 325 l does not exist on the market. A new compressor type must therefore be developed which must by combined and optimized with a pinion. A new compressor type with pinion will, when developed, demand substantial production changes at costs of probably a three-figure million amount. There is no doubt that the continuous operation of refrigerators will become dominating in the future, and globally it will result in a decrease of the energy consumption of 2-3%. (LN)

  7. Energy efficient Supermarket Refrigeration with Ejectors

    OpenAIRE

    Calvo Hoyas, Raul

    2014-01-01

    Nowadays, the use of R744 or carbon dioxide has been increased as a working fluid in many refrigerant systems. Nevertheless, one disadvantage for use this refrigerant is the thermodynamic losses produced in the refrigerant system when the fluid is throttled. These losses are increased if the refrigerant system is working in transcritical operation conditions. But, there is an option and it consists of using an ejector instead of the conventional expansion valve in order to reduce the energy l...

  8. 复合制冷循环间冷系统制冷剂/工质的选择论证%A Selection Demonstration of Refrigerant/Medium for Compound Refrigerating Cycle of Indirect Air Cooling System

    Institute of Scientific and Technical Information of China (English)

    杨善让; 雷扬; 赵波; 盛杰; 陈立军

    2012-01-01

    该文旨在从目前80余种制冷剂(包括替代工质)中筛选出能满足复合制冷循环间冷系统f以下简称复间冷)要求的中间传热介质(制冷剂/工质)。筛选步骤如下:1)按制冷剂的臭氧损耗潜势和全球变暖潜势挑选出满足环保要求的“环保型制冷剂”;2)根据环保型制冷剂的物性对复间冷要求的满足程度,挑出合适度比较高的若干种;3)从前两轮筛选出的制冷剂/工质挑出做功能力最大者。最终氨成为3轮筛选唯一胜出的自然物质。考虑到氨的气味对人的呼吸道有刺激性,条件具备时可燃可爆,故再次仔细分析了其安全性,指出其燃爆可防、易防,拟定了相应防范措施,并列举了应用实例。全文结论为:氨物性对复间冷的合适度最高,环境最友好,安全可靠,性价比高。作为复间冷的制冷剂/工质,氨虽非最佳,但目前尚无更佳的替代物。%This paper aims at sieving out the intermediate heat transfer medium (namely refrigerant/medium) for the compound refrigerating cycle from more than 80 refrigerants, which are capable of meeting the compound refrigerating cycle's demands. The sieve course are comprised of 3-steps: 1)According to the values of ozone depletion potential (ODP) and global warming potential (GWP) of refrigerants sifted the so called "environment protection type refrigerant" which meet the environment protection requirements; 2) Based on property parameters of the environment protection type refrigerants/ mediums select those refrigerants which are in accord with requirements of compound refrigerating cycle of indirect air cooling system; 3)The third criterion is that the power capability of medium in inverse refrigerating cycle is the maximum of all the mediums selected by the first and second round of the sifting. At last, the ammonia became the only natural materials which satisfy all

  9. Improvement of xenon purification system using a combination of a pulse tube refrigerator and a coaxial heat exchanger

    CERN Document Server

    Chen, Wan-Ting; Cussonneau, J -P; Donnard, J; Duval, S; Lemaire, O; Calloch, M Le; Ray, P Le; Mohamad-Hadi, A -F; Morteau, E; Oger, T; Scotto-Lavina, L; Stutzmann, J -S; Thers, D; Briend, P; Haruyama, T; Mihara, S; Tauchi, T

    2012-01-01

    We have developed a compact cryogenic system with a pulse tube refrigerator and a coaxial heat exchanger. This liquefaction-purification system not only saves the cooling power used to reach high gaseous recirculation rate, but also reduces the impurity level with high speed. The heat exchanger operates with an efficiency of 99%, which indicates the possibility for fast xenon gas recirculation in a highpressurized large-scale xenon storage with much less thermal losses.

  10. Refrigerant charge management in a heat pump water heater

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Jie; Hampton, Justin W.

    2016-07-05

    Heat pumps that heat or cool a space and that also heat water, refrigerant management systems for such heat pumps, and methods of managing refrigerant charge. Various embodiments remove idle refrigerant from a heat exchanger that is not needed for transferring heat by opening a refrigerant recovery valve and delivering the idle refrigerant from the heat exchanger to an inlet port on the compressor. The heat exchanger can be isolated by closing an electronic expansion valve, actuating a refrigerant management valve, or both. Refrigerant charge can be controlled by controlling how much refrigerant is drawn from the heat exchanger, by letting some refrigerant back into the heat exchanger, or both. Heat pumps can be operated in different modes of operation, and various components can be interconnected with refrigerant conduit. Some embodiments deliver refrigerant gas to the heat exchanger and drive liquid refrigerant out prior to isolating the heat exchanger.

  11. Performance evaluation of heat pump system using R744/R161 mixture refrigerant

    Directory of Open Access Journals (Sweden)

    Zhang Xian-Ping

    2014-01-01

    Full Text Available As an efficient and energy conservation technology, heat pumps working with R22, which are scheduled to be phased out by Montreal Protocol, are widely used in China at present. The global deteriorating ecology environment would accelerate the phase-out time of R22 in developing countries. Therefore, as a matter of urgency, an eco-friendly substitute should be investigated in order to replace R22. Under this context, and with a consideration of the environmental protection, R744/R161 mixture refrigerant is proposed. R744/R161 mixture refrigerant’s condensation pressure is reduced and its flammability and explosivity are suppressed. A thermodynamic model is developed, and under the given working conditions, the performances of subcritical heat pump system using R744/R161 mixture of variable mass fraction are discussed and compared with those of the R22 system. The optimal mass fraction of R744/R161 is given, which corresponds to a maximal heating coefficient of performance. The simulation results show that R744/R161 mixture can work as a competitive alternative to R22 in heat pump system.

  12. The On-Site Status of the Kstar Helium Refrigeration System

    Science.gov (United States)

    Chang, H.-S.; Park, D. S.; Joo, J. J.; Moon, K. M.; Cho, K. W.; Kim, Y. S.; Bak, J. S.; Kim, H. M.; Cho, M. C.; Kwon, I. K.; Fauve, E.; Bernhardt, J.-M.; Dauguet, P.; Beauvisage, J.; Andrieu, F.; Yang, S.-H.; Baguer, G. M. Gistau

    2008-03-01

    Since the first design of the KSTAR helium refrigeration system (HRS) in year 2000, many modifications and changes have been applied due to both system optimization and improved knowledge of the KSTAR cold components. The present specification of the HRS had been fixed on March, 2005. Consequent manufacturing of main equipment, such as "Compressor Station" (C/S), "Cold Box" (C/B), and "Distribution Box ♯1" (D/B ♯1) was completed by or under the supervision of Air Liquide DTA by the end of year 2006. The major components of the C/S are 2 low and 2 high pressure compressor units and an oil-removal system. The cooling power of the C/B at 4.5 K equivalent is 9 kW achieved by using 6 turbo-expanders. The D/B ♯1 is a cryostat housing 49 cryogenic valves, 2 supercritical helium circulators, 1 cold compressor, and 7 heat exchangers immersed in a 6 m3 liquid helium storage. In this proceeding, the on-site installation and commissioning status of the HRS will be presented. In addition, the final specification and design features of the HRS and the

  13. Sorption Refrigeration / Heat Pump Cycles

    Science.gov (United States)

    Saha, Bidyut Baran; Alam, K. C. Amanul; Hamamoto, Yoshinori; Akisawa, Atsushi; Kashiwagi, Takao

    Over the past few decades there have been considerable efforts to use adsorption (solid/vapor) for cooling and heat pump applications, but intensified efforts were initiated only since the imposition of international restrictions on the production and use of CFCs (chlorofluorocarbons) and HCFCs (hydrochlorofluorocarbons). Up to now, only the desiccant evaporative cooling system of the open type has achieved commercial use, predominantly in the United States. Closed-type adsorption refrigeration and heat pump systems are rarely seen in the market, or are still in the laboratory testing stage. Promising recent development have been made in Japan for the use of porous metal hydrides and composite adsorbents. In this paper, a short description of adsorption theories along with an overview of present status and future development trends of thermally powered adsorption refrigeration cycles are outlined putting emphasis on experimental achievements. This paper also addressed some advanced absorption cycles having relatively higher COP, and also summarizes fundamental concepts of GAX cycles and various GAX cycles developed for heat pump applications.

  14. Refrigerator-freezer energy testing with alternative refrigerants

    Science.gov (United States)

    Vineyard, E. A.; Sand, J. R.; Miller, W. A.

    1989-07-01

    As a result of the Montreal Protocol that limits the production of ozone-depleting refrigerants, manufacturers are searching for alternatives to replace the R12 that is presently used in residential refrigerator-freezers. Before an alternative can be selected, several issues must be resolved. Among these are energy impacts, system compatibility, cost, and availability. In an effort to determine the energy impacts of some of the alternatives, energy consumption tests were performed in accordance with section 8 of the Association of Home Appliance Manufacturers (AHAM) standard for household refrigerators and household freezers. The results are presented for an 18 cubic foot (0.51 cubic meter), top-mount refrigerator-freezer with a static condenser using the following refrigerants: R12, R500, R12/Dimethyl-ether (DME), R22/R142b, and R134a. Conclusions from the AHAM test are that R500 and R12 /DME have a reduced energy consumption relative to R12 when replaced in the test unit with no modifications to the refrigeration system. Run times were slightly lower than R12 for both refrigerants indicating a higher capacity. While the R134a and R22/R142b results were less promising, changes to the refrigeration system, such as a different capillary tube or compressor, may improve performance.

  15. Refrigeration Showcases

    Science.gov (United States)

    1997-01-01

    Through the Technology Affiliates Program at the Jet Propulsion Laboratory (JPL), valuable modifications were made to refrigerator displays built by Displaymor Manufacturing Company, Inc. By working with JPL, Displaymor could address stiffer requirements that ensure the freshness of foods. The application of the space technology meant that the small business would be able to continue to market its cases without incurring expenses that could threaten the viability of the business, and the future of several dozen jobs. Research and development improvements in air flow distribution and refrigeration coil technology contributed greatly to certifying Displaymor's showcases given the new federal regulations. These modifications resulted in a refrigerator case that will keep foods cooler, longer. Such changes maintained the openness of the display, critical to customer visibility and accessibility, impulse buying, and cross-merchandising.

  16. Regulating Power from Supermarket Refrigeration

    DEFF Research Database (Denmark)

    O'Connell, Niamh; Madsen, Henrik; Pinson, Pierre

    2014-01-01

    This paper presents an analysis of the demand response capabilities of a supermarket refrigeration system, with a particular focus on the suitability for participation in the regulating power market. An ARMAX model of a supermarket refrigeration system is identified using experimental data from...... the Danfoss refrigeration test centre. The complexities of modelling demand response are demonstrated through simulation. Simulations are conducted by placing the identified model in a direct-control demand response architecture, with power reference tracking using model predictive control. The energylimited...... nature of demand response from refrigeration is identified as the key consideration when considering participation in the regulating power market. It is demonstrated that by restricting the operating regions of the supermarket refrigeration system, a simple relationship can be found between the available...

  17. Cloud Absorption Radiometer Autonomous Navigation System - CANS

    Science.gov (United States)

    Kahle, Duncan; Gatebe, Charles; McCune, Bill; Hellwig, Dustan

    2013-01-01

    CAR (cloud absorption radiometer) acquires spatial reference data from host aircraft navigation systems. This poses various problems during CAR data reduction, including navigation data format, accuracy of position data, accuracy of airframe inertial data, and navigation data rate. Incorporating its own navigation system, which included GPS (Global Positioning System), roll axis inertia and rates, and three axis acceleration, CANS expedites data reduction and increases the accuracy of the CAR end data product. CANS provides a self-contained navigation system for the CAR, using inertial reference and GPS positional information. The intent of the software application was to correct the sensor with respect to aircraft roll in real time based upon inputs from a precision navigation sensor. In addition, the navigation information (including GPS position), attitude data, and sensor position details are all streamed to a remote system for recording and later analysis. CANS comprises a commercially available inertial navigation system with integral GPS capability (Attitude Heading Reference System AHRS) integrated into the CAR support structure and data system. The unit is attached to the bottom of the tripod support structure. The related GPS antenna is located on the P-3 radome immediately above the CAR. The AHRS unit provides a RS-232 data stream containing global position and inertial attitude and velocity data to the CAR, which is recorded concurrently with the CAR data. This independence from aircraft navigation input provides for position and inertial state data that accounts for very small changes in aircraft attitude and position, sensed at the CAR location as opposed to aircraft state sensors typically installed close to the aircraft center of gravity. More accurate positional data enables quicker CAR data reduction with better resolution. The CANS software operates in two modes: initialization/calibration and operational. In the initialization/calibration mode

  18. Static Characteristics of Absorption Chiller-Heater Supplying Cold and Hot Water Simultaneously

    Science.gov (United States)

    Inoue, Naoyuki; Irie, Tomoyoshi

    Absorption chiller-heaters which can supply both chilled water and hot water at the same time, are used for cooling and heating air conditioning systems. In this paper, we classified absorption cold and hot water generating cycles and control methods, studied these absorption cycles by cycle simulation. In economizer cycle, condensed refrigerant which heats hot water is transported to cooling cycle and used effectively for cooling chilled water, Concerning with transported condensed refrigerant, there are two methods, all condensed refrigerant or required refrigerant for cooling are transported to cooling cycle, and required refrigerant method is better for energy saving. Adding improvement of solution control to this economizer cycle, simultaneous cold and hot water supplying chiller-heaters have good characteristics of energy saving in the all region.

  19. Performance optimization for a variable throat ejector in a solar refrigeration system

    KAUST Repository

    Yen, R.H.

    2013-08-01

    In a solar vapor ejector refrigeration system, the solar heat supply may vary because of variations in solar irradiation intensity, making it difficult to maintain a steady generator temperature. To improve ejector performance, this study proposes a variable throat ejector (VTEJ) and analyzes its performance using CFD simulations. The following conclusions can be drawn. An ejector with a greater throat area and larger solar collector allows a wider operating range of generator temperatures, but may be overdesigned and expensive. Conversely, decreasing the throat area limits the operating range of generator temperatures. Thus the ejector with a fixed throat area may be unsuitable to use solar energy as a heat source. For a VTEJ, this study derives a curve-fitting relationship between the optimum throat area ratio and the operating temperatures. Using this relationship to adjust the throat area ratio, the ejector can consistently achieve optimal and stable performances under a varying solar heat supply. © 2013 Elsevier Ltd and IIR. All rights reserved.

  20. Ultrafast transient absorption spectroscopy: principles and application to photosynthetic systems.

    Science.gov (United States)

    Berera, Rudi; van Grondelle, Rienk; Kennis, John T M

    2009-01-01

    The photophysical and photochemical reactions, after light absorption by a photosynthetic pigment-protein complex, are among the fastest events in biology, taking place on timescales ranging from tens of femtoseconds to a few nanoseconds. The advent of ultrafast laser systems that produce pulses with femtosecond duration opened up a new area of research and enabled investigation of these photophysical and photochemical reactions in real time. Here, we provide a basic description of the ultrafast transient absorption technique, the laser and wavelength-conversion equipment, the transient absorption setup, and the collection of transient absorption data. Recent applications of ultrafast transient absorption spectroscopy on systems with increasing degree of complexity, from biomimetic light-harvesting systems to natural light-harvesting antennas, are presented. In particular, we will discuss, in this educational review, how a molecular understanding of the light-harvesting and photoprotective functions of carotenoids in photosynthesis is accomplished through the application of ultrafast transient absorption spectroscopy.

  1. Refrigeration Servicing.

    Science.gov (United States)

    Hamilton, Donald L.; And Others

    This self-study course is designed to familiarize Marine enlisted personnel with the services required to be performed on refrigeration equipment. The course contains four study units. Each study unit begins with a general objective, which is a statement of what the student should learn from the unit. The study units are divided into numbered work…

  2. Quantum Stirling heat engine and refrigerator with single and coupled spin systems

    Science.gov (United States)

    Huang, Xiao-Li; Niu, Xin-Ya; Xiu, Xiao-Ming; Yi, Xue-Xi

    2014-02-01

    We study the reversible quantum Stirling cycle with a single spin or two coupled spins as the working substance. With the single spin as the working substance, we find that under certain conditions the reversed cycle of a heat engine is NOT a refrigerator, this feature holds true for a Stirling heat engine with an ion trapped in a shallow potential as its working substance. The efficiency of quantum Stirling heat engine can be higher than the efficiency of the Carnot engine, but the performance coefficient of the quantum Stirling refrigerator is always lower than its classical counterpart. With two coupled spins as the working substance, we find that a heat engine can turn to a refrigerator due to the increasing of the coupling constant, this can be explained by the properties of the isothermal line in the magnetic field-entropy plane.

  3. Heating control strategy in fresh air processor matched with variable refrigerant flow air conditioning system

    Energy Technology Data Exchange (ETDEWEB)

    Tu Qiu, E-mail: tuqiuky@163.co [Guangzhou Institute of Energy Conversion, Chinese Academy of Science, Guangzhou 510640 (China) and Key Laboratory of Renewable Energy and Gas Hydrate, Chinese Academy of Science, Guangzhou 510640 (China); Mao Shoubo; Feng Yuhai; Guo Defang [Haier Air-Conditioning Electronic Co. Ltd., Qingdao 266510 (China)

    2011-07-15

    Highlights: {yields} A set of fresh air processor matched with VRF AC has been designed. {yields} The heating control model of variable condensation temperature target has been presented {yields} The control strategy can realize reliable running, high control accuracy and energy-saving. {yields} The control model is universal for fresh air processors with different capacities. -- Abstract: The fresh air processor (FAP), matched with the variable refrigerant flow air conditioning system (VRF AC), has been developed. Two control methods were adopted to control the system running and air outlet temperature, contrastively. The first method is that the running frequency in heating mode is adjusted in terms of the ordinary control method of VRF, i.e., constant condensation temperature. The experiment demonstrates the control method is not feasible. For nominal heating under different static pressure and defrosting under 200 Pa static pressure, the system fluctuates frequently. And for high temperature heating, the air outlet temperature far exceeds the target temperature. Furthermore, the control model of variable condensation temperature target has been presented, and the heat transfer correction factor is introduced into the control model. And the control parameters in the model are determined by experiment. The control model is universal for FAPs with different capacities by identifying and choosing the heat transfer correction factor in the control program. For low temperature heating, the method of switching rotation speed of the motor can be adopted to enhance air outlet temperature to 22 {sup o}C. The control strategy can provide guide for the design and application of FAP.

  4. Internal heat exchange in an ejector-compression solar refrigeration system with R142b

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, Joge I; Estrada, Claudio A; Best, Roberto [Centro de Investigacion en Energia, UNAM, Temixco, Morelos (Mexico); Dorantes Ruben, J [Departamento de Energia, UNAM Azcapotzalco, Mexico, D.F. (Mexico)

    2000-07-01

    One way to use more efficiently the actual energy transfer in the ejector-compression system, is the use of heat exchangers between some of the components. The inclusion of two heat exchangers, preheater and precooler, is considered in a basic ejector-compression refrigeration system with refrigerant 142b. This study accounts for the energy and exergy efficiencies. COP and {epsilon}, according to parameter variations such as ejector efficiency, generation temperature with different superheating, condensation temperature and heat exchangers effectiveness. As known, the most important parameters in ejector-compression system analysis are the entrain-ment ratio U and system efficiencies COP and {epsilon}. The highest system COP and {epsilon}, as the entrainment ratio U, correspond to the highest exchangers effectiveness, highest superheating generator temperatures, highest ejector efficiency and lowest condenser temperature. For the COP and {epsilon} ratios, their maxima correspond to the same independent variables aforementioned for one of the higher superheating generator temperatures. In this case, this result indicates that the exergy efficiency {epsilon} does not contradict the information given by energy efficiency COP. So, to select correctly and optimum design condition, is enough to employ the COP ratio, which maximum value for the data shown corresponds to a superheating generator temperature of about 110 Celsius degrees, that can only be reached by evacuated tubular collectors or CPC solar concentrators. [Spanish] Una forma de usar mas eficientemente la transferencia real de energia en el sistema eyector-compresion es el uso de intercambiadores de calor entre algunos de los componentes. La inclusion de dos intercambiadores de calor precalentador y pre-enfriador se considera en un sistema de refrigeracion eyector-compresion con refrigerante 142b. Este estudio toma en cuenta las eficiencias de energia y exergia, COP y {epsilon}, de acuerdo con las variaciones

  5. Simple uniaxial pressure device for ac-susceptibility measurements suitable for closed cycle refrigerator system.

    Science.gov (United States)

    Arumugam, S; Manivannan, N; Murugeswari, A

    2007-06-01

    A simple design of the uniaxial pressure device for the measurement of ac-susceptibility at low temperatures using closed cycle refrigerator system is presented for the first time. This device consists of disc micrometer, spring holder attachment, uniaxial pressure cell, and the ac-susceptibility coil wound on stycast bobbin. It can work under pressure till 0.5 GPa and at the temperature range of 30-300 K. The performance of the system at ambient pressure is tested and calibrated with standard paramagnetic salts [Gd(2)O(3), Er(2)O(3), and Fe(NH(4)SO(4))(2)6H(2)O], Fe(3)O(4), Gd metal, Dy metal, superconductor (YBa(2)Cu(3)O(7)), manganite (La(1.85)Ba(0.15)MnO(3)), and spin glass material (Pr(0.8)Sr(0.2)MnO(3)). The performance of the uniaxial pressure device is demonstrated by investigating the uniaxial pressure dependence of La(1.85)Ba(0.15)MnO(3) single crystal with P||c axis. The Curie temperature (T(c)) decreases as a function of pressure with P||c axis (dT(c)dP(||c axis)=-11.65 KGPa) up to 46 MPa. The design is simple, is user friendly, and does not require pressure calibration. Measurement can even be made on thin and small size oriented crystals. The failure of the coil is remote under uniaxial pressure. The present setup can be used as a multipurpose uniaxial pressure device for the measurement of Hall effect and thermoelectric power with a small modification in the pressure cell.

  6. Accelerated test methods for life prediction of hermetic motor insulation systems exposed to alternative refrigerant/lubricant mixtures

    Science.gov (United States)

    Ellis, P. F., II; Ferguson, A. F.

    1995-04-01

    In 1992, the Air-Conditioning and Refrigeration Technology Institute, Inc. (ARTI) contracted Radian Corporation to ascertain whether an improved accelerated test method or procedure could be developed that would allow prediction of the life of motor insulation materials used in hermetic motors for air-conditioning and refrigeration equipment operated with alternative refrigerant/lubricant mixtures. Phase 1 of the project, Conceptual Design of an accelerated test method and apparatus, was successfully completed in June 1993. The culmination of that effort was the concept of the Simulated Stator Unit (SSU) test. The objective of the Phase 2 limited proof-of-concept demonstration was to: answer specific engineering/design questions; design and construct an analog control sequencer and supporting apparatus; and conduct limited tests to determine the viability of the SSU test concept. This report reviews the SSU test concept, and describes the results through the conclusion of the proof-of-concept prototype tests in March 1995. The technical design issues inherent in transforming any conceptual design to working equipment have been resolved, and two test systems and controllers have been constructed. Pilot tests and three prototype tests have been completed, concluding the current phase of work. One prototype unit was tested without thermal stress loads. Twice daily insulation property measurements (IPM's) on this unit demonstrated that the insulation property measurements themselves did not degrade the SSU.

  7. 46 CFR 58.20-15 - Installation of refrigerating machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Installation of refrigerating machinery. 58.20-15... AND AUXILIARY MACHINERY AND RELATED SYSTEMS Refrigeration Machinery § 58.20-15 Installation of refrigerating machinery. (a) Where refrigerating machines are installed in which anhydrous ammonia is used as...

  8. Energy Efficient Commercial Refrigeration with Carbon Dioxide Refrigerant and Scroll Expanders

    Energy Technology Data Exchange (ETDEWEB)

    Dieckmann, John [TIAX LLC, Lexington, MA (United States)

    2013-04-04

    Current supermarket refrigeration systems are built around conventional fluorocarbon refrigerants – HFC-134a and the HFC blends R-507 and R404A, which replaced the CFC refrigerants, R-12 and R-502, respectively, used prior to the Montreal Protocol phase out of ozone depleting substances. While the HFC refrigerants are non-ozone depleting, they are strong greenhouse gases, so there has been continued interest in replacing them, particularly in applications with above average refrigerant leakage. Large supermarket refrigeration systems have proven to be particularly difficult to maintain in a leak-tight condition. Refrigerant charge losses of 15% of total charge per year are the norm, making the global warming impact of refrigerant emissions comparable to that associated with the energy consumption of these systems.

  9. Effect of heat transfer on the performance of thermoelectric generator-driven thermoelectric refrigerator system

    Science.gov (United States)

    Chen, Lingen; Meng, Fankai; Sun, Fengrui

    2012-01-01

    A model of thermoelectric generator-driven thermoelectric refrigerator with external heat transfer is proposed. The performance of the combined thermoelectric refrigerator device obeying Newton's heat transfer law is analyzed using the combination of finite time thermodynamics and non-equilibrium thermodynamics. Two analytical formulae for cooling load vs. working electrical current, and the coefficient of performance (COP) vs. working electrical current, are derived. For a fixed total heat transfer surface area of four heat exchangers, the allocations of the heat transfer surface area among the four heat exchangers are optimized for maximizing the cooling load and the coefficient of performance (COP) of the combined thermoelectric refrigerator device. For a fixed total number of thermoelectric elements, the ratio of number of thermoelectric elements of the generator to the total number of thermoelectric elements is also optimized for maximizing both the cooling load and the COP of the combined thermoelectric refrigerator device. The influences of thermoelectric element allocation and heat transfer area allocation are analyzed by detailed numerical examples. Optimum working electrical current for maximum cooling load and COP at different total number of thermoelectric elements and different total heat transfer area are obtained, respectively.

  10. A diagnostic methodology for refrigerating systems; Methodologie de diagnostic des installations frigorifiques

    Energy Technology Data Exchange (ETDEWEB)

    Vrinat, G. [Association Francaise du Froid (AFF), 75 - Paris (France)

    1997-12-31

    A diagnostic methodology for refrigerating machines, equipment and plants has been defined and evaluated for EDF, the French national power utility and ADEME, the French Agency for Energy Conservation, in the framework of energy conservation objectives: the diagnostic method should enable to identify malfunctions, assess the cost efficiency of the equipment, identify limiting factors, and consider corrective measures

  11. Energy analysis of a solar advanced refrigeration system; Analisis energetico de un sistema de refrigeracion solar avanzado

    Energy Technology Data Exchange (ETDEWEB)

    Velazquez Limon, Nicolas [Universidad Autonoma de Baja California (Mexico); Best y Brown, Roberto [Universidad Nacional Autonoma de Mexico, Temixco, Morelos (Mexico)

    2000-07-01

    In this article is presented a solar refrigeration system that integrates the more recent and important technological advances of the training solar systems (SCS) and of the advanced absorption units. An analysis and evaluation is made of the energy behavior of the absorption system with heat exchanger absorber-generator (GAX), air cooled and assisted by a hybrid power plant natural gas-solar. Given the characteristic of high not-linearity of the resulting system of occupations, the proposed methodology contemplates a calculation sequence for the external currents and an iterative procedure for the internal currents. The unit was designed with a capacity of 10.6 kw (3 tons.) of cooling and uses ammonia-water as working fluid. Giving priority to internal energy integration, an arrangement of the GAX cycle is proposed, that allows 19% of solar contribution at full load, being able to be greater at partial loads. In spite of using as cooling means air at 40 Celsius degrees with a relative humidity of 24%, a COP of 0.86 in the cooling mode was obtained and 1.86 in the heating mode, with an internal energy integration of 1013 kJ/min, 37% more of the energy that is supplied in the generator. The massic flow rates of the GAX cycle were compared with those of a basic cycle, resulting 73% and 62% lower for the circulation rate and for the flow rate, respectively. [Spanish] En este articulo se presenta un sistema de refrigeracion solar que integra los avances tecnologicos mas recientes e importantes de los sistemas de capacitacion solar (SCS) y de las unidades de absorcion avanzadas. Se realiza un analisis y evaluacion del comportamiento energetico del sistema de absorcion con intercambio de calor absorbedor-generador (GAX), enfriado por aire y asistido por una fuente de energia hibrida gas natural-solar. Dada la caracteristica de alta no-linealidad del sistema de ocupaciones resultante, la metodologia propuesta contempla una secuencia de calculo para las corrientes externas

  12. Model systems for understanding absorption tuning by opsin proteins

    DEFF Research Database (Denmark)

    Nielsen, Mogens Brøndsted

    2009-01-01

    This tutorial review reports on model systems that have been synthesised and investigated for elucidating how opsin proteins tune the absorption of the protonated retinal Schiff base chromophore. In particular, the importance of the counteranion is highlighted. In addition, the review advocates...... is avoided, and it becomes clear that opsin proteins induce blueshifts in the chromophore absorption rather than redshifts....

  13. The Role of Absorption Cooling for Reaching Sustainable Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Lindmark, Susanne

    2005-07-01

    This thesis focuses on the role and potential of absorption cooling in future energy systems. Two types of energy systems are investigated: a district energy system based on waste incineration and a distributed energy system with natural gas as fuel. In both cases, low temperature waste heat is used as driving energy for the absorption cooling. The main focus is to evaluate the absorption technology in an environmental perspective, in terms of reduced CO{sub 2} emissions. Economic evaluations are also performed. The reduced electricity when using absorption cooling instead of compression cooling is quantified and expressed as an increased net electrical yield. The results show that absorption cooling is an environmentally friendly way to produce cooling as it reduces the use of electrically driven cooling in the energy system and therefore also reduces global CO{sub 2} emissions. In the small-scale trigeneration system the electricity use is lowered with 84 % as compared to cooling production with compression chillers only. The CO{sub 2} emissions can be lowered to 45 CO{sub 2}/MWh{sub c} by using recoverable waste heat as driving heat for absorption chillers. However, the most cost effective cooling solution in a district energy system is a combination between absorption and compression cooling technologies according to the study. Absorption chillers have the potential to be suitable bottoming cycles for power production in distributed systems. Net electrical yields over 55 % may be reached in some cases with gas motors and absorption chillers. This small-scale system for cogeneration of power and cooling shows electrical efficiencies comparable to large-scale power plants and may contribute to reducing peak electricity demand associated with the cooling demand.

  14. On-line Auto-Tuning of PI Control of the Superheat for a Supermarket Refrigeration System

    DEFF Research Database (Denmark)

    Yang, Zhenyu; Andersen, Casper; Izadi-Zamanabadi, Roozbeh

    2011-01-01

    An online PI auto-tuning method is proposed for superheat control for a type of supermarket refrigeration systems. The proposed procedure consists of three serial steps: Step-One uses one of the two proposed empirical methods, namely multi-step method and relay method, for modeling initialization...... controller is auto-tuned based on the obtained FOPDT model and the SIMC method in Step-Three. The proposed method is implemented on a real-sized physical system and the experimental results showed a promising potential to apply the proposed method into commercial development....

  15. Nonlinear Absorption and Refraction in Multilevel Organic Molecular System

    Institute of Scientific and Technical Information of China (English)

    LI Chun-Fei; DENG Xiao-Xu; WANG Yu-Xiao

    2000-01-01

    The nonlinear absorption and refraction in a multilevel organic molecular system is described by using the density matrix theory. The total absorptive coefficient of the system in the low-density case is equal to a linear sum of contributions from each energy level. Similarly, the total refractive index is equal to a linear sum of contributions from each energy level plus the refractive index of the vacuum. The absorption coefficient or refractive index due to each level is proportional to the population of that level, where the constant of proportionality is called the absorption cross-section or the refraction volume, respectively. The relation between the absorption cross-section and the refraction volume for each level is also given.

  16. Thermodynamic study of air-cycle and mercury-vapor-cycle systems for refrigerating cooling air for turbines or other components

    Science.gov (United States)

    Nachtigall, Alfred J; Freche, John C; Esgar, Jack B

    1956-01-01

    An analysis of air refrigeration systems indicated that air cycles are generally less satisfactory than simple heat exchangers unless high component efficiencies and high values of heat-exchanger effectiveness can be obtained. A system employing a mercury-vapor cycle appears to be feasible for refrigerating air that must enter the system at temperature levels of approximately 1500 degrees R, and this cycle is more efficient than the air cycle. Weight of the systems was not considered. The analysis of the systems is presented in a generalized dimensionless form.

  17. 自动复叠式制冷系统中制冷剂的组分分离研究%Automatic Cascade Refrigeration System of Refrigerant Components Separation Research

    Institute of Scientific and Technical Information of China (English)

    郑大宇; 陈秋燕

    2015-01-01

    With a single agent for refrigerant single-stage vapor compression refrigeration system was limited due to condensing pressure and compression ratio determined by the environment temperature, normally only applied in the temperature range of more than 200 k.And use a single refrigerant will be limited due to low evaporation pressure on the poles of the cycle, or refrigerant solidification.Multiple nonazeotropic mixed working medium automatic cascade can achieve in temperature range of 100 k, but as a result of working medium, the separation of gas and liquid two is not completely, make the system energy efficiency is low, the capacity is small, so that its application has great limitations.So study the phase change law of refrigeration technology and refrigeration equipment, improve the sepa-ration effect of the system, has important theory value and application significance.%以单一工质为制冷剂的单级蒸汽压缩制冷系统因受外界环境温度所决定的冷凝压力及压缩比的制约,一般只能应用于200K以上的温区。而采用单一制冷剂的两极循环将受到蒸发压力过低,或制冷剂凝固的限制。多元非共沸混合工质自动复叠可达到-100K以下的温区,但由于工质气液两相分离不完全,使系统能效较低,制冷量小,从而使其应用有较大局限。因此研究该制冷工艺的相变规律,制冷装置,提高该系统的分离效果,具有重要的理论价值和应用意义。

  18. Using solar-powered refrigeration for vaccine storage where other sources of reliable electricity are inadequate or costly.

    Science.gov (United States)

    McCarney, Steve; Robertson, Joanie; Arnaud, Juliette; Lorenson, Kristina; Lloyd, John

    2013-12-09

    Large areas of many developing countries have no grid electricity. This is a serious challenge that threatens the continuity of the vaccine cold chain. The main alternatives to electrically powered refrigerators available for many years--kerosene- and gas-driven refrigerators--are plagued by problems with gas supply interruptions, low efficiency, poor temperature control, and frequent maintenance needs. There are currently no kerosene- or gas-driven refrigerators that qualify under the minimum standards established by the World Health Organization (WHO) Performance, Quality, and Safety (PQS) system. Solar refrigeration was a promising development in the early 1980s, providing an alternative to absorption technology to meet cold chain needs in remote areas. Devices generally had strong laboratory performance data; however, experience in the field over the years has been mixed. Traditional solar refrigerators relied on relatively expensive battery systems, which have demonstrated short lives compared to the refrigerator. There are now alternatives to the battery-based systems and a clear understanding that solar refrigerator systems need to be designed, installed, and maintained by technicians with the necessary knowledge and training. Thus, the technology is now poised to be the refrigeration method of choice for the cold chain in areas with no electricity or extremely unreliable electricity (less than 4h per average day) and sufficient sunlight. This paper highlights some lessons learned with solar-powered refrigeration, and discusses some critical factors for successful introduction of solar units into immunization programs in the future including: •Sustainable financing mechanisms and incentives for health workers and technicians are in place to support long-term maintenance, repair, and replacement parts. •System design is carried out by qualified solar refrigerator professionals taking into account the conditions at installation sites. •Installation and

  19. Waste heat usage in commercial refrigeration systems - Energy analysis of two retail outlets; Abwaermenutzung in der gewerblichen Kaelte. Energetische Analyse von zwei Verkaufsstellen - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Erb, M.; Gutzwiller, S.

    2009-09-15

    This final report for the Swiss Federal Office of Energy (SFOE) presents the results of an analysis made on the use of waste heat produced by the refrigeration systems in two retail stores. The results of field measurements made in two installations in Migros and Coop supermarkets are presented. The efficiencies of heat recovery determined for the refrigeration systems are presented and discussed. The electro-thermal amplification factors (ETV) of the systems determined for the two installations are discussed. Basically, the authors are of the opinion that the ETV noted are very good. In both installations, heat recovery is energetically and ecologically very efficient. The factors leading to a high ETV are discussed and recommendations for the planning of such heat-recovery systems are made. An appendix includes schematics of the refrigeration systems in the two stores.

  20. Experimental evaluation of a cascade refrigeration system prototype with CO{sub 2} and NH{sub 3} for freezing process applications

    Energy Technology Data Exchange (ETDEWEB)

    Dopazo, J. Alberto; Fernandez-Seara, Jose [Area de Maquinas y Motores Termicos, E.T.S. de Ingenieros Industriales, University of Vigo, Campus Lagoas-Marcosende No 9, 36310 Vigo (Spain)

    2011-01-15

    A prototype of a cascade refrigeration system using NH{sub 3} and CO{sub 2} as refrigerants has been designed and built. The prototype is used to supply a 9 kW refrigeration capacity horizontal plate freezer at an evaporating temperature of -50 C as design conditions. The prototype includes a specific control system and a data acq*uisition system. The experimental evaluation started with the real conditions within the design operating parameters. Subsequently, several tests were performed fixing four CO{sub 2} evaporating temperatures (-50, -45, -40 and -35 C). At each one of the evaporating temperatures evaluated, the CO{sub 2} condensing temperature was varied from -17.5 to -7.5 C and an experimental optimum value of CO{sub 2} condensing temperature was determined. The discussions on the experimental results include the influence of the operating parameters on the cascade system's performance. In addition, the experimental results are compared with two common double stage refrigeration systems using NH{sub 3} as refrigerant. (author)

  1. Grey-box Modeling for System Identification of Household Refrigerators: a Step Toward Smart Appliances

    DEFF Research Database (Denmark)

    Costanzo, Giuseppe Tommaso; Sossan, Fabrizio; Marinelli, Mattia

    2013-01-01

    units, which operation can be shifted within temperature and operational constraints. Even if the refrigerators are not intended to be used as smart loads, validated models are useful in predicting units consumption. This information can increase the optimality of the management of other flexible units......, such as heat pumps for space heating, in order to smooth the load factor during peak hours, enhance reliability and efficiency in power networks and reduce operational costs....

  2. Theoretical study of ejector refrigeration system with working fluid R410a

    OpenAIRE

    Sandeep Kashyap; R.C. Gupta

    2011-01-01

    In this paper, simulation program is developed on based of one dimensional mathematical modal to analysis the performance ejector refrigeration cycle with working fluid R410a and also compared with performance of R134a. A performance comparison is made on various operating condition and ejector geometry. The result shows that performance of R134a is better than R410a for area ratio 5.64 and 7.84.

  3. Noise Source Identification of Small Fan-BLDC Motor System for Refrigerators

    OpenAIRE

    2006-01-01

    Noise levels in household appliances are increasingly attracting attention from manufacturers and customers. Legislation is becoming more severe on acceptable noise levels and low noise is a major marketing point for many products. The latest trend in the refrigerator manufacturing industry is to use brushless DC (BLDC) motors instead of induction motors in order to reduce energy consumption and noise radiation. However, cogging torque from BLDC motor is an und...

  4. Theoretical study of ejector refrigeration system with working fluid R410a

    Directory of Open Access Journals (Sweden)

    Sandeep Kashyap

    2011-08-01

    Full Text Available In this paper, simulation program is developed on based of one dimensional mathematical modal to analysis the performance ejector refrigeration cycle with working fluid R410a and also compared with performance of R134a. A performance comparison is made on various operating condition and ejector geometry. The result shows that performance of R134a is better than R410a for area ratio 5.64 and 7.84.

  5. Multi-Phase Galaxy Formation and Quasar Absorption Systems

    OpenAIRE

    Maller, Ariyeh H.

    2005-01-01

    The central problem of galaxy formation is understanding the cooling and condensation of gas in dark matter halos. It is now clear that to match observations this requires further physics than the simple assumptions of single phase gas cooling. A model of multi-phase cooling (Maller & Bullock 2004) can successfully account for the upper cutoff in the masses of galaxies and provides a natural explanation of many types of absorption systems (Mo & Miralda-Escude 1996). Absorption systems are our...

  6. Supermarket refrigerators with natural refrigerants; Supermarktkaelteanlagen mit natuerlichen Kaeltemitteln. Erfahrungsbericht

    Energy Technology Data Exchange (ETDEWEB)

    Haaf, S.; Heinbokel, B. [Linde AG, Koeln (Germany). Gechaeftsbereich Linde Kaeltetechnik

    2002-09-01

    In view of the high contribution to global warming of H-CFC refrigerants, substitution has been a key concern for several years now. Leakage protection measures were enhanced, and Linde also installed many supermarket refrigerators with natural refrigerants, i.e. ammonia, propene and carbon dioxide. The environmental and economic aspects are assessed on the basis of the experience gained, and the systems are compared with H-CFC refrigeration systems. [German] Wegen des betraechtlichen Treibhauspotentials von HFKW-Kaeltemitteln werden seit Jahren Anstrengungen unternommen, um den von diesen Stoffen ausgehenden Treibhauseffekt zu reduzieren. Neben Massnahmen zur Verminderung von Leckagen sowie zur Verringerung von Kaeltemittel-Fuellmengen wurden im Laufe der letzten 10 Jahre von Linde auch zahlreiche Kaelteanlagen mit den natuerlichen Kaeltemitteln Ammoniak, Propen und Kohlendioxid in Supermaerkten installiert. Auf Basis der gesammelten Erfahrungen wird eine Einschaetzung der umweltspezifischen und wirtschaftlichen Aspekte im Vergleich zu Anlagen mit HFKW-Kaeltemitteln vorgenommen. (orig.)

  7. Energy-optimised mini-refrigerators; Energieoptimierter Minikuehlschrank. Massnahmen zur Optimierung der Energieeffizienz von Minikuehlschraenken

    Energy Technology Data Exchange (ETDEWEB)

    Burri, A.

    2007-10-15

    This illustrated final report for the Swiss Federal Office of Energy (SFOE) takes a look at measures to be taken to optimise the energy-efficiency of small refrigerators. Such devices are typically to be found in hotel rooms and on boats as well as in caravans and motor homes. The majority of these mini-refrigerators use the absorption principle for cooling. Although less efficient than their compressor-driven counterparts, absorption refrigerators satisfy market requirements and customer wishes with regard to noiseless and maintenance-free operation. The report discusses how optimisation of the absorption principle could lead to energy savings in the long term. The operating principles and energy balances of such refrigerators are discussed and a market overview is presented. Energy consumption of the refrigerators, possible savings and energy costs are discussed. The advantages and disadvantages of various cooling systems are examined as are further possibilities for making savings such as the optimisation of sizing, installation methods, airflow factors and operating temperatures.

  8. Experimental Study On Thermal Wave Type Adsorption Refrigeration System Working On A Pair Of Activated Carbon And Methanol

    Directory of Open Access Journals (Sweden)

    Grzebielec Andrzej

    2015-12-01

    Full Text Available The aim of the study was to examine the efficiency of the thermal wave type adsorption refrigerating equipment working on a pair of activated carbon and methanol. Adsorption units can work in trigeneration systems and in applications driven by waste heat. They can be built also as a part of hybrid sorption-compressor systems, and they are very popular in solar refrigeration systems and energy storage units. The device examined in this study operates in a special mode called thermal wave. This mode allows to achieve higher efficiency rates than the normal mode of operation, as a significant contributor to transport heat from one to the other adsorber. To carry out the experiment a test bench was built, consisting of two cylindrical adsorbers filled with activated carbon, condenser, evaporator, oil heater and two oil coolers. Thermal oil circulation was responsible for providing and receiving heat from adsorbers. In order to perform the correct action a special control algorithm device was developed and implemented to keep the temperature in the evaporator at a preset level. The experimental results show the operating parameters changes in both adsorbers. Obtained COP (coefficient of performance for the cycle was 0.13.

  9. Elimination of wet return lines in ammonia systems. High-efficiency systems for energy reduction in industrial refrigeration plants with ammonia

    Energy Technology Data Exchange (ETDEWEB)

    Moensted, A.

    2011-01-15

    The industrial refrigeration system design for ammonia plants has changed very little in the past years and the regulation system for each individual evaporator station is kept at a minimum with a solenoid for the liquid line and a regulator for the hot gas defrost. However, in the machine room there has been extensive development with the introduction of high-performance screw compressors with speed regulators and more efficient regulation systems. With this project, Danish Technological Institute has evaluated that possibilities exist for building more advanced systems at each evaporator system as the savings potential lies in the low-temperature control. There are some technical challenges involved in the development of cost-effective pumps and ejectors for this purpose and the work has commenced. It is possible that the components will be available in the market within few years. The measurement gave some basic data for Koerting to develop an ejector for the refrigeration market. Similarly, the project has provided Grundfos with basic knowledge about the performance requirements for small refrigerant circulation pumps used for establishing local circulation. It is a clear conclusion of the project that using small pumps for local ammonia circulation is beneficial to the performance as well as the energy efficiency of the system. The overall savings potential of the three evaporators amounts to between 13 and 19%. (LN)

  10. Short-Cycle Adsorption Refrigerator

    Science.gov (United States)

    Chan, C. K.

    1988-01-01

    Modular adsorption/Joule-Thomson-effect refrigerator offers fast regeneration; adsorption/desorption cycle time expected to be 1 minute. Pressurized hydrogen generated by bank of compressor modules during heating phase passes through system of check valves and expands in Joule-Thomson junction as it enters refrigeration chamber. Hydrogen absorbs heat from load before it is sucked out by another bank of compressor modules in cooling phase.

  11. Floating loop method for cooling integrated motors and inverters using hot liquid refrigerant

    Science.gov (United States)

    Hsu, John S.; Ayers, Curtis W.; Coomer, Chester; Marlino, Laura D.

    2007-03-20

    A method for cooling vehicle components using the vehicle air conditioning system comprising the steps of: tapping the hot liquid refrigerant of said air conditioning system, flooding a heat exchanger in the vehicle component with said hot liquid refrigerant, evaporating said hot liquid refrigerant into hot vapor refrigerant using the heat from said vehicle component, and returning said hot vapor refrigerant to the hot vapor refrigerant line in said vehicle air conditioning system.

  12. Modelling and Assessment of the Capabilities of a Supermarket Refrigeration System for the Provision of Regulating Power

    DEFF Research Database (Denmark)

    O'Connell, Niamh; Madsen, Henrik; Pinson, Pierre

    This report presents an analysis of the demand response capabilities of a supermarket refrigeration system, with a particular focus on the suitability of this resource for participation in the regulating power market. An ARMAX model of the system is identified from experimental data, and the model...... are revealed that would complicate the task of devising bids on a conventional power market. These complexities are incurred due to the physical characteristics and constraints of the system as well as the particular characteristics of the control frameworks employed. Simulations considering the provision...... of the system this behaviour can be simplified. These restrictions result in a loss of optimality, but a result in a resource that can be communicated to the market operator in the form of a bid containing a quantity of power for up- or down-regulation and the duration for which the service can be provided....

  13. REACH. Refrigeration Units.

    Science.gov (United States)

    Snow, Rufus; And Others

    As a part of the REACH (Refrigeration, Electro-Mechanical, Air-Conditioning, Heating) electromechanical cluster, this student manual contains individualized instructional units in the area of refrigeration. The instructional units focus on refrigeration fundamentals, tubing and pipe, refrigerants, troubleshooting, window air conditioning, and…

  14. Effect of ZnO nanoparticles in R290/R600a (50/50) based vapour compression refrigeration system added via lubricant oil on compressor suction and discharge characteristics

    Science.gov (United States)

    Kumar, Ravinder; Singh, Jagdev

    2016-10-01

    The primary source of energy consumption in a vapour compression refrigeration system is a compressor. The possibility of a reduction in the work of compression may leads to enhance the compressor suction and discharge characteristics and the overall performance of the refrigeration system. The present experimental investigation based upon the study of ZnO nanoparticles in a vapour compression refrigeration system using hydrocarbon blend R290/R600a (50/50) as a refrigerant. The zinc oxide nanoparticles are appended with system refrigerant via compressor lubricating oil. The results observed that by using different weight concentrations of nanoparticles in R290/R600a refrigeration system, both the compressor suction and discharge pressures and temperatures were reduced compared to conventional system. The viscosity of mineral oil with the addition of nanoparticles increases. The compressor energy consumption was reduced by 7.48 % using (0.2-1.0) wt% concentrations of nanoparticles. The COP of the refrigeration system has been increased by about 46 % with the addition of nanoparticles. Thus, the ZnO nanoparticles worked efficiently in the R290/R600a refrigeration system.

  15. Effects of acoustic hood on noise, CFC-11, and particulate matter in a recycling system for waste refrigerator cabinet.

    Science.gov (United States)

    Guo, Jie; Fang, Wenxiong; Yang, Yichen; Xu, Zhenming

    2014-11-01

    The mechanical-physical process was proven to be technologically feasible for waste refrigerator recycling and has been widely used in the typical e-waste recycling factories in China. In this study, effects of the acoustic hood on the reduction of noise level, CFC-11, and heavy metals (Cr, Ni, Cu, Cd, and Pb) in particulate matter (PM) were evaluated. For noise pollution, the noise level inside and outside the acoustic hood was 96.4 and 78.9 dB, respectively. Meanwhile, it had a significant effect on A-weighted sound level with a reduction from 98.3 to 63.6 dB. For CFC-11 exposure, abundant CFC-11 (255 mg/m(3)) was detected in the acoustic hood. However, the mean concentration of CFC-11 at the outline of polyurethane foam collection was obviously diminished to 14 mg/m(3), and no CFC-11 was monitored around the acoustic hood. The concentrations of PM and heavy metals in PM outside the acoustic hood were lower than those inside the acoustic hood due to the physical barriers of the acoustic hood. Based on the risk assessment, only adverse health effect caused by Pb might likely appear. All the results can provide the basic data for pollution control and risk assessment in waste refrigerator recycling system.

  16. Performance improvement of double-tube gas cooler in CO2 refrigeration system using nanofluids

    Directory of Open Access Journals (Sweden)

    Sarkar Jahar

    2015-01-01

    Full Text Available The theoretical analyses of the double-tube gas cooler in transcritical carbon dioxide refrigeration cycle have been performed to study the performance improvement of gas cooler as well as CO2 cycle using Al2O3, TiO2, CuO and Cu nanofluids as coolants. Effects of various operating parameters (nanofluid inlet temperature and mass flow rate, CO2 pressure and particle volume fraction are studied as well. Use of nanofluid as coolant in double-tube gas cooler of CO2 cycle improves the gas cooler effectiveness, cooling capacity and COP without penalty of pumping power. The CO2 cycle yields best performance using Al2O3-H2O as a coolant in double-tube gas cooler followed by TiO2-H2O, CuO-H2O and Cu-H2O. The maximum cooling COP improvement of transcritical CO2 cycle for Al2O3-H2O is 25.4%, whereas that for TiO2-H2O is 23.8%, for CuO-H2O is 20.2% and for Cu-H2O is 16.2% for the given ranges of study. Study shows that the nanofluid may effectively use as coolant in double-tube gas cooler to improve the performance of transcritical CO2 refrigeration cycle.

  17. Consideration of Sludge Formation in HFC-134a / Polyol Ester oil Refrigeration System

    Science.gov (United States)

    Yamamoto, Tsutomu; Yamamoto, Tethuya; Simizu, Yasuhiko; Nakayama, Yoshinori; Takizawa, Kikuo

    A refrigeration test employing HFC-134a and polyol ester oil was carried out in order to make clear the causes of the sludge formation in the capillary tube. Compressors used were two types: a hermetic reciprocating compressor and a rotary compressor. Installed dryer contained desiccant of the compound zeolite type. The results showed that the amount of capillary sludge increased as the compressor temperature rose. The capillary sludge was determined to consist of desiccant and metal dust for the reciprocating compressor, and of tar-like substance for the rotary compressor. Thermal stability test which was used to check the degree of deterioration of the ester oil, suggested that the presence of desiccant and high compressor temperature might produce tar-like substance by the break down and polymerization of the ester oil. In addition, it was confirmed that factors affecting the sludge formation were the dirtiness of the refrigeration circuit for the reciprocating compressor, and the presence of desiccant, for the rotary compressor.

  18. Gas absorption in an agitated gas-liquid-liquid system

    NARCIS (Netherlands)

    Cents, A.H.G.; Brilman, D.W.F.; Versteeg, G.F.

    2001-01-01

    Gas-liquid-liquid systems have gained interest in the past decade and are encountered in several important industrial applications. In these systems an immiscible liquid phase may affect the gas absorption rate significantly. This phenomenon, however, is not completely understood and underlying mech

  19. Advancement of Double Effect Absorption Cycle by Input of Low Temperature Waste Heat

    Science.gov (United States)

    Kojima, Hiroshi; Edera, Masaru; Nakamura, Makoto; Oka, Masahiro; Akisawa, Atsushi; Kashiwagi, Takao

    Energy conservation is becoming important for global environmental protection. New simple techniques of more efficient1y using the waste heat of gas co-generation systems for refrigerationare required. In first report, a new method of using the low temperature waste heat for refrigeration was proposed, and the basic characteristics of the promising methods of recovering waste heat were c1arified. In this report, the more detailed simulation model of the series flow type double effect absorption refrigerator with auxiliary heat exchanger was constructed and the static characteristics were investigated. Then experiments on this advanced absorption refrigerator were carried out, and the results of the calculation and experiments were compared and discussed. Moreover, the betterment of the simulation model of this advanced absorption refrigerator was carried out.

  20. 太阳能两级喷射式制冷系统性能的模拟及其分析%Simulation and analysis on the two - stage ejector refrigeration system performance of solar refrigeration

    Institute of Scientific and Technical Information of China (English)

    王子敬; 王辉涛; 包桂蓉; 李勤

    2012-01-01

    讨论了一种新型的太阳能制冷系统——带回热器的太阳能两级喷射式制冷系统.该系统最大的特点是将两个喷射器串联在一起,以提高整个太阳能制冷系统的性能系数.分别采用R134a、R152a、R245ca和R227ea为制冷工质下系统性能系数COP随两级间总压比分配度不同的变化关系.这四种制冷剂的两级压缩比的变化对总喷射系数的影响各有不同,并提出了气体喷射器的总压缩比1.2-2.8之间两级压缩比的不均匀分配原则.%A new combined refrigeration system, i. e. two — stage ejector refrigeration system with regenerator of solar refrigeration was studied theoretically. The system was characterized by two injectors in series to improve the coefficient of performance ( COP) of the solar cooling system. These system characteristics in use of R134a、R152a、R245ca and R227ea respectively as a working fluid were calculated. The changes of two - stage compression ratio of four working fluids affected the total ejector coefficient. How to distribute the two - stage compression ratio between 1. 2 and 2. 8 of the total of the compression ratio was gived.

  1. Study on LXe system for particle detector. Liquefaction test by pulse tube refrigerator; Ryushi kenshutsuyo ekitai Xenon shisutemu no kenkyu. Parusu kan reitokini yoru ekika

    Energy Technology Data Exchange (ETDEWEB)

    Haruyama, T.; Kasami, K. [High energy Accelerator Research Organization, Tsukuba (Japan)

    1999-11-10

    It is supersensitively used for the particle detection from electrons and that they release the light, that it can deal with fast process, etc. for the high-energy particle which emits liquid Xenon. It recently proposes the experiment which uses large liquid Xenon as a calorimeter in order to detect {gamma}ray of the high energy. It examines the thermal characteristic of liquid Xenon, while this study attempts the optimization in liquefying Xenon by pulse tube refrigerating machine. This time, the following are reported: Introduction of the Xenon gas system for the small-scale liquefaction experiment and experiment near 165K of small pulse tube refrigerating machine on a refrigerating capacity. (NEDO)

  2. Adsorption refrigeration technology theory and application

    CERN Document Server

    Wang, Ruzhu; Wu, Jingyi

    2014-01-01

    Gives readers a detailed understanding of adsorption refrigeration technology, with a focus on practical applications and environmental concerns Systematically covering the technology of adsorption refrigeration, this book provides readers with a technical understanding of the topic as well as detailed information on the state-of-the-art from leading researchers in the field. Introducing readers to background on the development of adsorption refrigeration, the authors also cover the development of adsorbents, various thermodynamic theories, the design of adsorption systems and adsorption refri

  3. 重型卡车朗肯-朗肯制冷系统热力学研究%Theoretical Study on the Rankine-Rankine Refrigeration Cycle System Driven by Heavy Truck Waste Heat

    Institute of Scientific and Technical Information of China (English)

    王令宝; 卜宪标; 李华山; 马伟斌

    2014-01-01

    本文针对重型卡车发动机冷却液余热工况,采用R245fa作为循环工质建立了朗肯-朗肯制冷系统,剖析了此系统的基本原理和结构特点,根据系统分析建立了数学模型,模拟分析了发生温度、冷凝温度、蒸发温度对系统性能的影响。结果表明:在发生温度85℃、冷凝温度50℃、蒸发温度5℃时,系统COP达到0.254,虽然此系统的效率要低于相同工况下的吸收制冷循环,但是朗肯-朗肯制冷系统相对于吸收制冷系统具有尺寸小、易于控制和快速响应等优点,利用朗肯-朗肯循环回收重型卡车发动机冷却液余热迚行制冷是可行的。%The paper established a Rankine-Rankine refrigeration cycle system driven by heavy truck engine coolant waste heat, which uses R245fa as working medium. The basic principle and structural characteristics of the system are analyzed. According to the system analysis, the mathematical model is established. The effects of generating temperature, condensation temperature and evaporation temperature on the system performance are investigated. The COP reaches 0.254, when the generating temperature is 85oC, the condensation temperature is 50oC and the evaporation temperature is 5oC. The Rankine-Rankine refrigeration cycle system has the advantages of small size, easy to control and fast response, although the COP is lower than that of the absorption refrigeration under the same condition. We can believe that Rankine-Rankine refrigeration cycle system is feasible to recovery engine coolant waste heat.

  4. Controlled environment laboratory for the energy certification of refrigeration and air conditioning systems; Laboratorio de ambiente controlado para la certificacion energetica de sistemas de refrigeracion y aire acondicionado

    Energy Technology Data Exchange (ETDEWEB)

    Ambriz, Juan Jose; Romero Paredes, Hernando; Dorantes, Ruben [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

    1999-07-01

    In this paper the general characteristics of the Controlled Environment Laboratory (CELAB) are described and some of the possible tests that could be performed in this device to evaluate the energy efficiency in air conditioning systems, domestic refrigeration and industrial refrigeration, as well as tests to evaluate the hydrothermal comfort in national populations, are presented. [Spanish] En este trabajo se describen las caracteristicas generales del Laboratorio de Ambiente Controlado (LAB), y se presentan algunas de las posibles pruebas que podran ser desarrolladas en este dispositivo para evaluar la eficiencia energetica en sistemas de aire acondicionado, refrigeracion domestica y refrigeracion industrial, asi como para pruebas para evaluar el confort hidrotermico en poblaciones nacionales.

  5. Entropy Assessment on Environmental Influence of Condense Heat in Recovery System in Air-Conditioning Refrigerating Machine

    Institute of Scientific and Technical Information of China (English)

    TANG Wen-wu; WANG Han-qing

    2009-01-01

    This paper presented an entropy evaluation method for the influences of condense heat recovery system on the environment.Aiming at the damage of the condense heat to the environment,an entropy of re-source loss and an emission entropy from the condense heat recovery system in the air conditioning refrigerating machine were introduced.For the evaluation of the entropies,we developed a new algorithm for the parameter i-dentifieation.called the composite influence coefficient,based on the Least Squares Support Vector Machine method.By simulation,the numerical experiments shows that the Least Squares Support Vector Machine method is one of the powerful methods for the parameter identification to compute the damage entropy of the condense heat,with the largest training error being-0.025(the relative error being-3.56%),and the biggest test error being 0.015(the relative error being 2.5%).

  6. Economic analysis of wind-powered refrigeration cooling/water-heating systems in food processing. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Garling, W.S.; Harper, M.R.; Merchant-Geuder, L.; Welch, M.

    1980-03-01

    Potential applications of wind energy include not only large central turbines that can be utilized by utilities, but also dispersed systems for farms and other applications. The US Departments of Energy (DOE) and Agriculture (USDA) currently are establishing the feasibility of wind energy use in applications where the energy can be used as available, or stored in a simple form. These applications include production of hot water for rural sanitation, heating and cooling of rural structures and products, drying agricultural products, and irrigation. This study, funded by USDA, analyzed the economic feasibility of wind power in refrigeration cooling and water heating systems in food processing plants. Types of plants included were meat and poultry, dairy, fruit and vegetable, and aquaculture.

  7. Experimental validation of the simulation module of the water-cooled variable refrigerant flow system under cooling operation

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yue Ming; Wu, Jing Yi [Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, Shanghai (China); Shiochi, Sumio [Daikin Industries, Ltd., 1304 Kanaoka-cho, Kita-ku, Sakai, Osaka 591-8511 (Japan)

    2010-05-15

    On the basis of EnergyPlus's codes, the catalogue and performance parameters from some related companies, a special simulation module for variable refrigerant flow system with a water-cooled condenser (water-cooled VRF) was developed and embedded in the software of EnergyPlus, the building energy simulation program. To evaluate the energy performance of the system and the accuracy of the simulation module, the measurement of the water-cooled VRF is built in Dalian, China. After simulation and comparison, some conclusions can be drawn. The mean of the absolute value of the daily error in the 9 days is 11.3% for cooling capacity while the one for compressor power is 15.7%. At the same time, the accuracy of the power simulation strongly depends on the accuracy of the cooling capacity simulation. (author)

  8. Corrosion Problems in Absorption Chillers

    Science.gov (United States)

    Stetson, Bruce

    1978-01-01

    Absorption chillers use a lithium bromide solution as the medium of absorption and water as the refrigerant. Discussed are corrosion and related problems, tests and remedies, and cleaning procedures. (Author/MLF)

  9. Commissioning and operational results of helium refrigeration system at JLab for the 12GeV upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Knudsen, Peter N. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Ganni, Venkatarao [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Dixon, Kelly D. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Norton, Robert O. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Creel, Jonathan D. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2015-12-01

    The new 4.5 K refrigerator system at the Jefferson Lab (JLab) Central Helium Liquefier (CHL-2) for the 12 GeV upgrade was commissioned in late spring of 2013, following the commissioning of the new compressor system, and has been supporting 12 GeV LINAC commissioning since that time. Six design modes were tested during commissioning, consisting of a maximum capacity, nominal capacity, maximum liquefaction, maximum refrigeration, maximum fill and a stand-by/reduced load condition. The maximum capacity was designed to support a 238 g/s, 30 K and 1.16 bar cold compressor return flow, a 15 g/s, 4.5 K liquefaction load and a 12.6 kW, 35-55 K shield load. The other modes were selected to ensure proper component sizing and selection to allow the cold box to operate over a wide range of conditions and capacities. The cold box system is comprised of two physically independent cold boxes with interconnecting transfer-lines. The outside (upper) 300-60 K vertical cold box has no turbines and incorporates a liquid nitrogen pre-cooler and 80-K beds. The inside (lower) 60-4.5 K horizontal cold box houses seven turbines that are configured in four expansion stages including one Joule-Thompson expander and a 20-K bed. The helium compression system has five compressors to support three pressure levels in the cold box. This paper will summarize the analysis of the test data obtained over the wide range of operating conditions and capacities which were tested.

  10. High-Performance, Low Environmental Impact Refrigerants

    Science.gov (United States)

    McCullough, E. T.; Dhooge, P. M.; Glass, S. M.; Nimitz, J. S.

    2001-01-01

    Refrigerants used in process and facilities systems in the US include R-12, R-22, R-123, R-134a, R-404A, R-410A, R-500, and R-502. All but R-134a, R-404A, and R-410A contain ozone-depleting substances that will be phased out under the Montreal Protocol. Some of the substitutes do not perform as well as the refrigerants they are replacing, require new equipment, and have relatively high global warming potentials (GWPs). New refrigerants are needed that addresses environmental, safety, and performance issues simultaneously. In efforts sponsored by Ikon Corporation, NASA Kennedy Space Center (KSC), and the US Environmental Protection Agency (EPA), ETEC has developed and tested a new class of refrigerants, the Ikon (registered) refrigerants, based on iodofluorocarbons (IFCs). These refrigerants are nonflammable, have essentially zero ozone-depletion potential (ODP), low GWP, high performance (energy efficiency and capacity), and can be dropped into much existing equipment.

  11. Middle infrared optoelectronic absorption systems for monitoring physiological glucose solutions

    Science.gov (United States)

    Martin, W. Blake

    Tight monitoring of the glucose levels for diabetic individuals is essential to control long-term complications. A definitive diabetes management system has yet to be developed for the diabetic. This research investigates the application of middle infrared absorption frequencies for monitoring glucose levels in biological solutions. Three frequencies were identified using a Fourier transform infrared spectrometer and correlated to changes in glucose concentrations. The 1035 +/- 1 cm-1 frequency was determined to be the best representative frequency. Other biological molecules contributed no significant interference to monitoring glucose absorption. A second frequency at 1193 cm-1 was suggested as a representative background absorption frequency, which could be used for more accurate glucose absorption values. Next, a quantum cascade laser optoelectronic absorption system was designed and developed to monitor glucose. After careful alignment and design, the system was used to monitor physiological glucose concentrations. Correlation at 1036 cm-1 with glucose changes was comparable to the previous results. The use of the background absorption frequency was verified. This frequency essentially acts as a calibrating frequency to adjust in real-time to any changes in the background absorption that may alter the accuracy of the predicted glucose value. An evanescent wave cavity ring-down spectroscopy technique was explored to monitor molecules in a biological solution. Visible light at 425 nm was used to monitor hemoglobin in control urine samples. An adsorption isotherm for hemoglobin was detectable to limit of 5.8 nM. Evanescent wave cavity ring-down spectroscopy would be useful for a glucose solution. Given an equivalent system designed for the middle infrared, the molar extinction coefficient of glucose allows for a detectable limit of 45 mg/dl for a free-floating glucose solution, which is below normal physiological concentrations. The future use of a hydrophobic

  12. Refrigeration systems of high temperature superconduction transformers for rail vehicles. Final report; Kaelteversorgung von Schienenfahrzeug-Transformatoren mit HT-Supraleitung. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Glatthaar, R.

    2000-09-01

    The refrigeration system for the HTS-transformer was designed in cooperation with the transformer manufacturer and the requirements for the refrigerator have been determined. Several active and passive refrigeration systems were investigated, two of them have been elaborated more detailed. All the refrigeration systems are based on the concept of a liquid nitrogen flow rate of 1000 g/s passing through the 6 MVA transformer at a temperature of approx. 66 K and at a pressure of approx. 3 bars. The passive system uses as refrigerant source a tank with liquid nitrogen, weighing approx. 2300 kg and consuming 500 kg liquid nitrogen per day. After evaporating and preheating the nitrogen used exits to atmosphere with a vacuum pump. The active system elaborated more detailed applies a Stirling engine for refrigeration, will weigh 1600 kg and needs an average electric power of 25 kW. The refrigeration system for a transformer of ceramic superconducting material has significant advantages with regard to weight, power consumption and investment costs compared to a transformer of the same size manufactured as metallic superconductors. (orig.) [German] In Zusammenarbeit mit dem Transformatorhersteller wurden die Kaelteversorgung des HTS-Transformators konzipiert und die Anforderungen an die Kaelteanlage festgelegt. Verschiedene sogenannte passive und aktive Systeme fuer die Kaelteversorgung wurden untersucht, zwei davon naeher ausgearbeitet. Die Kuehlkonzepte sehen vor, dass fuer einen Transformator der Leistung 6 MVA ein Strom an fluessigem Stickstoff von 1000 g/s mit einer Temperatur von ca. 66 K und unter einem Druck von rund 3 bar durch den Transformator geleitet wird. Das passive System ist gekennzeichnet durch Einsatz eines Tanks fuer fluessigen Stickstoff als Kaeltequelle, hat ein Gewicht von etwa 2300 kg und einen Verbrauch an fluessigem Stickstoff von 500 kg/Tag. Der Stickstoff wird nach Verdampfung und Anwaermung mit Hilfe einer Vakuumpumpe an die Umgebung abgegeben

  13. PREDICTION OF SOLAR ADSORPTION REFRIGERATION SYSTEM PERFORMANCE USING ANN BASED ON GENETIC LEARNING

    Directory of Open Access Journals (Sweden)

    Salah. Hanini

    2012-08-01

    Full Text Available An adsorptive solar refrigerator performance was modelled using artificial neural networks (ANNs. This model takes into account the adsorbent bed, condenser and the evaporator characteristics as well as the working pair (Activated carbon /methanol properties and the climate conditions. The supervised learning of the ANN is based on a genetic algorithm (GA supported by an elitist strategy. Input, hidden and output layers model the topology of the ANN. The weights of the synapses and the biases for hidden and output nodes are used as design variables in the ANN learning process. The mean relative error between experimental (extracted from literature and simulated results are used to monitor the learning process. The optimal ANN obtained after learning is tested. This approach of ANN learning based on GA presents low mean relative errors in learning and testingphases.

  14. A Robust Cooling Platform for NIS Junction Refrigeration and sub-Kelvin Cryogenic Systems

    Science.gov (United States)

    Wilson, B.; Atlas, M.; Lowell, P.; Moyerman, S.; Stebor, N.; Ullom, J.; Keating, B.

    2014-08-01

    Recent advances in Normal metal-insulator-superconductor (NIS) tunnel junctions (Clark et al. Appl Phys Lett 86: 173508, 2005, Appl Phys Lett 84: 4, 2004) have proven these devices to be a viable technology for sub-Kelvin refrigeration. NIS junction coolers, coupled to a separate cold stage, provide a flexible platform for cooling a wide range of user-supplied payloads. Recently, a stage was cooled from 290 to 256 mK (Lowell et al. Appl Phys Lett 102: 082601 2013), but further mechanical and electrical improvements are necessary for the stage to reach its full potential. We have designed and built a new Kevlar suspended cooling platform for NIS junction refrigeration that is both lightweight and well thermally isolated; the calculated parasitic loading is pW from 300 to 100 mK. The platform is structurally rigid with a measured deflection of 25 m under a 2.5 kg load and has an integrated mechanical heat switch driven by a superconducting stepper motor with thermal conductivity G W/K at 300 mK. An integrated radiation shield limits thermal loading and a modular platform accommodates enough junctions to provide nanowatts of continuous cooling power. The compact stage size of 7.6 cm 8.6 cm 4.8 cm and overall radiation shield size of 8.9 cm 10.0 cm 7.0 cm along with minimal electrical power requirements allow easy integration into a range of cryostats. We present the design, construction, and performance of this cooling platform as well as projections for coupling to arrays of NIS junctions and other future applications.

  15. Non-linear model predictive supervisory controller for building, air handling unit with recuperator and refrigeration system with heat waste recovery

    DEFF Research Database (Denmark)

    Minko, Tomasz; Wisniewski, Rafal; Bendtsen, Jan Dimon

    2016-01-01

    In this paper we examine a supermarket system. In order to grasp the most important dynamics we present a model that includes the single zone building thermal envelope with its heating, cooling and ventilation. Moreover we include heat waste recovery from the refrigeration high pressure side. The...

  16. Air cooled absorption chillers for solar cooling applications

    Science.gov (United States)

    Biermann, W. J.; Reimann, R. C.

    1982-03-01

    The chemical composition of a 'best' absorption refrigerant system is identified, and those properties of the system necessary to design hot water operated, air cooled chilling equipment are determined. Air cooled chillers from single family residential sizes into the commercial rooftop size range are designed and operated.

  17. Active Absorption Wave Maker System for Irregular Waves

    Institute of Scientific and Technical Information of China (English)

    柳淑学; 王先涛; 李木国; 郭美谊

    2003-01-01

    The key problem in physical model tests with highly reflective structures is to prevent the multiple reflections between the reflective structures and the wave maker. An active absorption wave maker system is described and the representative frequency method for irregular waves is proposed in this paper. Physical model tests are conducted to verify the effectiveness of the proposed method.

  18. Modeling and energy simulation of the variable refrigerant flow air conditioning system with water-cooled condenser under cooling conditions

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yueming; Wu, Jingyi [Shanghai Jiao Tong University, Institute of Refrigeration and Cryogenics (China); Shiochi, Sumio [Daikin Industries Ltd. (Japan)

    2009-09-15

    As a new system, variable refrigerant flow system with water-cooled condenser (water-cooled VRF) can offer several interesting characteristics for potential users. However, at present, its dynamic simulation simultaneously in association with building and other equipments is not yet included in the energy simulation programs. Based on the EnergyPlus's codes, and using manufacturer's performance parameters and data, the special simulation module for water-cooled VRF is developed and embedded in the software of EnergyPlus. After modeling and testing the new module, on the basis of a typical office building in Shanghai with water-cooled VRF system, the monthly and seasonal cooling energy consumption and the breakdown of the total power consumption are analyzed. The simulation results show that, during the whole cooling period, the fan-coil plus fresh air (FPFA) system consumes about 20% more power than the water-cooled VRF system does. The power comparison between the water-cooled VRF system and the air-cooled VRF system is performed too. All of these can provide designers some ideas to analyze the energy features of this new system and then to determine a better scheme of the air conditioning system. (author)

  19. The Energy-saving Optimization of Chilled Water Refrigeration System for a Large Chemical Enterprise%大型化工企业冷冻水制备系统节能优化改造

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    From energy saving point of view , the energy-saving optimization scheme of chilled water refrigeration system for Lucky Film Co ., Ltd.was determined by problems in the refrigeration operation system and the company ’ s practical situation .The exact schemes were the centrifugal refrigeration machine instead of lithium bro-mide absorption refrigerating machine , installing screw chiller , and fan and pump energy saving transformation and water substitute for circulating water and so on .Analysis of economic and energy saving benefit of chilled water preparation system after optimization and reform was presented .The results show that the optimal modification was not only achieved better energy-saving effect, but also improved economic and social the benefits .In 2014, the a-mount of water used reduced to 65.5%, the water and electricity consumption per cooling capacity reduced to 68.5% and 8.7%respectively, and the cost reduction amounts up to 1.217 million Yuan.The comprehensive en-ergy consumption was dropped by 5.23%.%从节能的角度出发,针对某大型化工企业冷冻水制备系统运行过程中存在的问题,并结合公司实际情况确定了制冷系统的节能优化改造方案。通过对离心制冷机替代溴化锂制冷机、安装螺杆制冷机、风机水泵节能改造、循环补充水的中水替代等方案的实施,进行优化改造后冷冻水制备系统经济和节能效益分析。方案实施后不但取得较好的节能效益,也带来了比较大的经济效益,2014年水的消耗量降低65.5%,水单耗降低68.5%,电单耗下降8.7%,全年节约费用为121.7万元,实现综合能耗同比下降5.23%。

  20. The distribution of absorptive power dissipation in irradiated nanoparticulate system

    Science.gov (United States)

    Li, Jiayu; Yang, Jian; Gu, Xiaobing

    2016-10-01

    The knowledge of local radiant absorption is important to the nanostructure optimization, it is beneficial to the applications in energy harvesting, optical heating, photocatalysis, etc. In this paper, FDTD model is constructed for the distribution of absorptive power dissipation in irradiated nanoparticulate system. The theoretical model extended from Mie theory is used to examine the FDTD model, the parameters and conditions set for FDTD simulation are confirmed based on the comparison. Then, the influence of Ag nanoparticle on the absorptive properties of nearby TiO2 nanoparticle is investigated by FDTD simulation at the wavelength of 0.25 μm. It is indicated that suitable distance between TiO2 and Ag particles is beneficial to the spectral radiant absorption of TiO2 particle. Considering the agglomeration of nanoparticles and the oxidation at the TiO2-Ag interface, the Ag core coated with Al2O3 shell is suggested, and the simulated results indicated that the shell thickness and the Ag core size need to be optimized for enhancing the radiant absorption of TiO2 particle.

  1. Cycling Joule Thomson refrigerator

    Science.gov (United States)

    Tward, E.

    1983-01-01

    A symmetrical adsorption pump/compressor system having a pair of mirror image legs and a Joule Thomson expander, or valve, interposed between the legs thereof for providing a, efficient refrigeration cycle is described. The system further includes a plurality of gas operational heat switches adapted selectively to transfer heat from a thermal load and to transfer or discharge heat through a heat projector, such as a radiator or the like. The heat switches comprise heat pressurizable chambers adapted for alternate pressurization in response to adsorption and desorption of a pressurizing gas confined therein.

  2. ARTI Refrigerant Database

    Energy Technology Data Exchange (ETDEWEB)

    Calm, J.M. [Calm (James M.), Great Falls, VA (United States)

    1994-05-27

    The Refrigerant Database consolidates and facilitates access to information to assist industry in developing equipment using alternative refrigerants. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern.

  3. Thermodynamic simulation for a vapour compression system using organic refrigerants; Simulacao termodinamica do ciclo de compressao a vapor utilizando fluidos refrigerantes organicos

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Francisco S.; Santos, Carlos A.C. dos [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil). Lab. de Energia Solar; Torres, Ednildo A.; Jesus, Marcos F. de [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Dept. de Engenharia Quimica. Lab. de Energia e Gas

    2004-07-01

    According to the Montreal protocol, it is foreseen a total retreat of CFCs and HCFCs in applications of refrigeration and air conditioning. Before this context, considerable attention has been used in the substitution of HCFC-22 (R22) in systems of air conditioning, where they appear as possible alternatives two HFCs (R407c and R410a) and two HCs (R290 and R600a). In this work, possibilities and problems for the use of these fluids as alternatives to R22 in equipment of refrigeration are discussed. Five refrigerants (R22, R407c, R410a, R290 and R600) are selected, computational simulations done and your characteristic in terms of thermodynamic cycles are shown. The obtained conclusion is that propane offers the best alternative for R22 in equipment of refrigeration, because this besides being energetically efficient, is environmentally acceptable. However, safety precautions due to your inflammability must be seriously taken into account. For some applications the substitution of the current fluids (halocarbons) by the hydrocarbons can be done without larger additional costs, but not in the general case. (author)

  4. Proceedings of the 1993 non-fluorocarbon insulation, refrigeration and air conditioning technology workshop

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    Sessions included: HFC blown polyurethanes, carbon dioxide blown foam and extruded polystyrenes, plastic foam insulations, evacuated panel insulation, refrigeration and air conditioning, absorption and adsorption and stirling cycle refrigeration, innovative cooling technologies, and natural refrigerants. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  5. 46 CFR 58.20-20 - Refrigeration piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Refrigeration piping. 58.20-20 Section 58.20-20 Shipping... AND RELATED SYSTEMS Refrigeration Machinery § 58.20-20 Refrigeration piping. (a) All piping materials... chemical and physical properties as to remain ductile at the lowest operating temperature. (b)...

  6. The circum-galactic medium of quasars: CIV absorption systems

    CERN Document Server

    Landoni, M; Treves, A; Scarpa, R; Farina, E P

    2015-01-01

    We investigate the properties of the circumgalactic gas in the halo of quasar host galaxies from CIV absorption line systems. Optical spectroscopy of closely aligned pairs of quasars (projected distance \\leq 200 kpc) obtained at the Gran Telescopio Canarias is used to investigate the distribution of the absorbing gas for a sample of 18 quasars at z \\sim 2. We found that the detected absorption systems of EW \\geq 0.3Ang associated with the foreground QSO are revealed up to 200 kpc from the center of the host galaxy. The structure of the absorbing gas is rather patchy with a covering fraction of the gas that quickly decreases beyond 100 kpc. These results are in qualitative agreement with those found for the lower ionisation metal Mg II 2800 Ang.

  7. Stabilized master laser system for differential absorption lidar.

    Science.gov (United States)

    Dinovitser, Alex; Hamilton, Murray W; Vincent, Robert A

    2010-06-10

    Wavelength accuracy and stability are key requirements for differential absorption lidar (DIAL). We present a control and timing design for the dual-stabilized cw master lasers in a pulsed master-oscillator power-amplifier configuration, which forms a robust low-cost water-vapor DIAL transmitter system. This design operates at 823 nm for water-vapor spectroscopy using Fabry-Perot-type laser diodes. However, the techniques described could be applied to other laser technologies at other wavelengths. The system can be extended with additional off-line or side-line wavelengths. The on-line master laser is locked to the center of a water absorption line, while the beat frequency between the on-line and the off-line is locked to 16 GHz using only a bandpass microwave filter and low-frequency electronics. Optical frequency stabilities of the order of 1 MHz are achieved.

  8. MEMBRANOUS FLOWS IN GAS-LIQUID COLLECTORS-REGENERATORS OF SOLAR ABSORPTIVE SYSTEMS FEATURES

    Directory of Open Access Journals (Sweden)

    Doroshenko А.V.

    2009-12-01

    Full Text Available Article is devoted to the creation of new generation of solar collectors of the gas-liquid type, intended for use in alternative refrigerating and conditioning systems of drying-evaporating type with direct solar regeneration of absorbent. Special attention is given to the study of membranous flows features on inclined surfaces, including questions of such flows stability.

  9. Anomalous Brownian refrigerator

    Science.gov (United States)

    Rana, Shubhashis; Pal, P. S.; Saha, Arnab; Jayannavar, A. M.

    2016-02-01

    We present a detailed study of a Brownian particle driven by Carnot-type refrigerating protocol operating between two thermal baths. Both the underdamped as well as the overdamped limits are investigated. The particle is in a harmonic potential with time-periodic strength that drives the system cyclically between the baths. Each cycle consists of two isothermal steps at different temperatures and two adiabatic steps connecting them. Besides working as a stochastic refrigerator, it is shown analytically that in the quasistatic regime the system can also act as stochastic heater, depending on the bath temperatures. Interestingly, in non-quasistatic regime, our system can even work as a stochastic heat engine for certain range of cycle time and bath temperatures. We show that the operation of this engine is not reliable. The fluctuations of stochastic efficiency/coefficient of performance (COP) dominate their mean values. Their distributions show power law tails, however the exponents are not universal. Our study reveals that microscopic machines are not the microscopic equivalent of the macroscopic machines that we come across in our daily life. We find that there is no one to one correspondence between the performance of our system under engine protocol and its reverse.

  10. Thermo-refrigerating machineries. Classification; Machines thermofrigorifiques. Classification

    Energy Technology Data Exchange (ETDEWEB)

    Duminil, M. [Association Francaise du Froid (AFF), 75 - Paris (France)

    2002-07-01

    Thermo-refrigerating systems transfer the heat extracted from a cold source towards a heat source and consume thermal energy from a third source. This article proposes a classification of thermo-refrigerating systems in three categories: the systems with a changing state working fluid (physical change of the refrigerant: dissociable systems, integrated systems (ejection systems, sorption systems); chemical change of the refrigerant), the systems where the working fluid stays in the same physical state (dissociable systems (Brayton, Siemens, Stirling and Ericsson cycles), integrated systems (Vuilleumier cycle systems, thermochemical systems)) and the other systems (Seebeck thermoelectric generator with Peltier effect modules). Dissociable thermo-refrigerating systems are made of the grouping of two separate thermal machines: a thermal engine and a mechanical-refrigerating machine. (J.S.)

  11. Magnetic refrigeration materials

    Institute of Scientific and Technical Information of China (English)

    戴闻; 沈保根; 高政祥

    2001-01-01

    Magnetic refrigeration has drawn much attention because of its greater efficiency and higher reliability than the traditional gas-cycle refrigeration technology. Recently, a kind of new materials with a giant magnetocaloric effect in the subroom temperature range, Gd5 (Six Ge1- x)4, was discovered, which boosts the search for high-performance magnetic refrigerants. However, the intermetallic compounds Gd5 (SixGe1 - x )4 belong to the first order transition materials; their performance in practical magnetic refrigeration cycles remains controversial. In this paper the developing tendency of the refrigerants are discussed on the basis of our work.

  12. Novel materials for laser refrigeration

    Science.gov (United States)

    Hehlen, Markus P.

    2009-02-01

    The status of optical refrigeration of rare-earth-doped solids is reviewed, and the various factors that limit the performance of current laser-cooling materials are discussed. Efficient optical refrigeration is possible in materials for which hωmax 100 ppb are believed to be the main reason for the limited laser-cooling performance in current materials. The many components of doped ZBLAN glass pose particular processing challenges. Binary fluoride glasses such as YF3-LiF are considered as alternatives to ZBLAN, and the crystalline system KPb2Cl5 :Dy3+ is identified as a prime candidate for high-efficiency laser cooling.

  13. HFC perspectives in air-conditioning and refrigeration; Perspectives HFC en A/C et refrigeration

    Energy Technology Data Exchange (ETDEWEB)

    Fauvarque, P. [ELF Atochem, Centre d`Application de Lavallois, 92 (France)

    1997-12-31

    This paper is a series of transparencies dealing with the development of substitutes for the replacement of the R-22 refrigerant in air-conditioning systems (R-134a, R-407C, R-410A), and in industrial refrigeration systems of agriculture and food industry (R-134a and R-404A). (J.S.)

  14. 吸收式太阳能制冷空调系统的性能分析%Performance analysis of a solar absorption air-conditioning system

    Institute of Scientific and Technical Information of China (English)

    谭军毅; 姚莉; 卢挺浩; 余国保

    2012-01-01

    An absorption solar refrigeration air-conditioning system, which consists of solar heat collector, absorption refrigerant unit, auxiliary heating device and intelligent controller is introduced in this paper. The operation data which has been collected for more than one year is organized, also a performance analysis in allusion to typical summer/winter work condition is presented, and an economical efficiency calculation comparing with conventional air-condition has been carried out to get the payback period of this system.%介绍了一个吸收式太阳能制冷空调系统,该系统由太阳能集热器、吸收式制冷机组、辅助加热装量、智能控制器等部分组成.文章对该系统一年多的运行数据进行了采集和整理,针对夏季与冬季的典型工况进行了性能分析,并与常规空调进行了经济性对比,分析其投资回收期.

  15. High Performance Drying System Using Absorption Temperature Amplifier

    Science.gov (United States)

    Nishimura, Nobuya; Nomura, Tomohiro; Yabushita, Akihiro; Kashiwagi, Takao

    A computer simulation has been developed on transient drying process in order to predict the dynamic thermal performance of a new superheated steam drying system using an absorption type temperature amplifier as a steam superheater. A feature of this drying system is that one can reuse the exhausted superheated stream conventionally discharged from the dryer as a driving heat source for the generator in this heat pump. But in the transient drying process, the evaporation of moisture sharply decreases. Accordingly, it is hardly expected to reuse an exhausted superheated steam as heating source for the generator. 80 the effects of this exhausted superheated steam and of changes in hot water and the cooling water temperatures were mainly investigated checking whether this drying system can be driven directly by the low level energy of sun or waste heat. Furthermore, the system performances of this drying system were evaluated on a qualitative-basis by using the exergy efficiency. The results show that, under the transient drying conditions, the temperature boost of superheated steam is possible at a high temperature and thus the absorption type temperature amplifier can be an effective steam superheater system.

  16. System Analysis on Absorption Chiller Utilizing Intermediate Wasted Heat

    Science.gov (United States)

    Yamada, Miki; Suzuki, Hiroshi; Usui, Hiromoto

    A system analysis has been performed for the multi-effect absorption chiller (MEAC) applied as a bottoming system of 30kW class hybrid system including micro gas turbine (MGT) and solid oxide fuel cell (SOFC) hybrid system. In this paper, an intermediate wasted heat utilization (IWHU) system is suggested for lifting up the energy efficiency of the whole system and coefficient of performance (COP) of MEAC. From the results, the suggested IWHU system was found to show the very high energy efficiency compared with a terminal wasted heat utilization (TWHU) system that uses only the heat exhausted from the terminal of MGT/SOFC system. When TWHU system is applied for MEAC, the utilized heat from the MGT/SOFC system is found to remain low because the temperature difference between the high temperature generator and the wasted heat becomes small. Then, the energy efficiency does not become high in spite of high COP of MEAC. On the other hand, the IWHU system could increase the utilized heat for MEAC as performs effectively. The exergy efficiency of IWHU system is also revealed to be higher than that of a direct gas burning system of MEAC, because the wasted heat is effectively utilized in the IWHU system.

  17. Heat and mass transfer analysis of a helical coil rectifier in an ammonia-water absorption system

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Seara, Jose; Sieres, Jaime; Vazquez, Manuel [Area de Maquinas y Motores Termicos, Escuela Tecnica Superior de Ingenieros Industriales de Vigo, Campus Lagoas-Marcosende, No 9, 36200, Vigo (Spain)

    2003-08-01

    This paper presents a detailed study on the ammonia-water vapour rectification process in absorption systems using a helical coil rectifier. A differential mathematical model has been developed on the basis of mass and energy balances and heat and mass transfer equations. The differential volume has been defined in each coil turn by a differential angle on the turn and a second differential angle on the coiled tube cross section. It contains the corresponding differential portion of coolant, coiled tube wall, condensate film and vapour. Simultaneous heat and mass transfer processes have been taken into account in the vapour and liquid phases. The model equations have been solved using the finite-difference method. Results have been obtained for characteristic data from an ammonia-water absorption refrigeration system. Most significant calculated variable profiles along the coil height as well as in the coiled tube cross section are presented and discussed. The influence of the heat and mass transfer coefficients on the rectifier performance has also been considered. (authors)

  18. Simulation of LNG Refrigerated Truck's Cold Energy Recovery System%LNG冷藏车冷量回收系统仿真研究

    Institute of Scientific and Technical Information of China (English)

    张哲; 田津津; 毛力; 孙冰冰

    2012-01-01

    液化天然气(LNG)在气化升温过程中会释放大量的冷量,LNG冷藏车回收并利用该冷量对车厢进行供冷,该冷藏车具有节能和环保的特点.本文介绍了LNG冷藏车的基本原理以及新型冷量回收系统的设计方案,为了研究LNG冷藏车的供冷性能,建立了仿真模型并对冷藏车冷量回收系统进行模拟计算,分析了乙二醇入口温度和流量、LNG流量、风速、系统压力对制冷量、空气出口温度的影响.计算结果显示,乙二醇流量是对系统性能具有重要影响参数之一,通过对结果分析,证明了LNG冷量回收应用于冷藏车制冷的可行性,同时为LNG冷藏车的系统设计提供了参数.研究结论对LNG冷藏车设计具有重要的参考价值.%The vaporization of LNG in the heating process releases a lot of cold energy. The cold energy was used to cool the air temperature in LNG refrigerated trucks which is energy-saving and environmental protection. The basic principles of LNG refrigerated trucks and the design of cold recovery system were described. In order to research the cooling performance of LNG refrigerated trucks, a simulation model was established. The effect of the glycol inlet temperature and flow rate, natural gas flow rate, wind speed and the system pressure on the cooling capacity and air outlet temperature were analyzed. The results show that ethylene glycol flow is an important factor on system performance and LNG cold energy recovery is suitable for the refrigerated truck. The bases for design of LNG refrigerated trucks are provided according to the analysis. The conclusion is of great significance on the design of LNG refrigerated trucks in industry.

  19. Intermittent duty solar refrigerator assisted by heat pipes

    Energy Technology Data Exchange (ETDEWEB)

    Al-Hindi, R.R.; Khalifa, A.M.A.; Akyurt, M.

    1988-01-01

    The design of a solar operated intermittent-duty aqua-ammonia type of absorption refrigerator is described. The generator is heated by an integral acetone heat pipe, the evaporator of which is in the form of a low-thermal-mass flat plate collector. The condenser is air cooled. The absorber is likewise cooled via a second R22 heat-pipe system by convection/radiation panels. Initial test results for the collector-generator loop are reported for a single-glazed collector. A discussion of overall performance is presented.

  20. Evolution of absorption machines; Evolution des machines a absorption

    Energy Technology Data Exchange (ETDEWEB)

    Soide, I.; Klemsdal, E. [Gaz de France (GDF), 75 - Paris (France); Le Goff, P.; Hornut, J.M. [LSGC-ENSIC, 54 - Nancy (France)

    1997-12-31

    Most of todays absorption air-conditioning machineries use the lithium bromide-water pair. The most performing can operate at a 150-160 deg. C, the temperature being limited by the corrosion resistance of metals with respect to LiBr solutions. Also, there is a revival of interest for water-ammonia systems. These systems require the use of a rectification column which reduces the coefficient of performance. Higher thermal performances are reached with hydrocarbon pairs and ternary mixtures (water-methanol-LiBr etc..). This paper presents different schemes of refrigerating heat pumps based on these different systems. (J.S.)

  1. Research and development of utilization technology of solar thermal system for industrial and other use. Development of system of advanced heat process type (chemical refrigeration and cold storage system using solar heat); Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Advanced heat process gata system no kaihatsu (taiyonetsu reito reizo no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Takita, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for chemical refrigeration and cold storage system using solar heat. The study on refrigeration materials are aimed at development of new hydrogen-occluding alloys which show good hydrogenation equilibrium characteristics and reactivity at temperature required for stand-alone refrigeration systems aided by solar heat, and still new hydrogen-occluding alloys operable at refrigeration temperature for lower-temperature systems. For the refrigeration materials capable of producing low-temperature heat of -10{degree}C at a regeneration temperature of 140{degree}C produced by solar heat, a La-Ni-Mn-Al alloy is selected for high-temperature use and a La-Y-Ni-Mn alloy for low-temperature use. The study on technology for refrigeration modules develops high-efficiency heat exchangers for refrigeration and regeneration, compatible with the hydrogen-occluding alloys. It also develops air-and water-cooling techniques for hydrogen-occluding alloys, where air is used as the heat source. The test apparatus is designed, installed and operated, to attain a low temperature of -10{degree}C or lower with a heat source of 140{degree}C and air heat source of 28{degree}C. 7 figs.

  2. Additional parameter in evaluating the performance of intermittent solar refrigerators

    Energy Technology Data Exchange (ETDEWEB)

    El-Shaarawi, M.A.I.; Ramadan, R.A.

    1988-01-01

    The parameters which have been considered by previous investigators in evaluating the performance of intermittent solar refrigerators are: the maximum attainable generator temperature, the condensing temperature and the initial solution conditions. The present investigation shows that an additional parameter, viz. the temperature of the condensate at the beginning of the absorption process, should be taken into consideration. Results of a thermodynamic analysis for the theoretical constant-temperature-absorption refrigeration cycle reveal that this parameter has considerable influence on the performance of intermittent solar refrigerators utilizing an ammonia-water solution as the working fluid.

  3. 降低冷冻系统能耗的技术改进%Technological improvement of reducing refrigeration system energy consumption

    Institute of Scientific and Technical Information of China (English)

    刘飞; 张本峰; 顾朝晖

    2014-01-01

    The paper briefly analyzes synthesis ammonia refrigeration system in summer producing. On the one hand, because of high temperature of synthesis circulating water,the temperature of water condenser outlet synthesis gas is high which need more cooling energy of ammonia condenser;on the other hand,liquid ammonia from refrigeration system to ammonia condenser is influenced by atmospheric temperature,the temperature rises which causes providing less cooling energy of unit liquid ammonia. Both causes result in ammonia condenser need more cooling energy,increases load of refrigerating machine which causes power consumption of refrigerating machine. It also introduces countermeasure to the problems,adding to a heat exchanger between refrigerating machine and liquid ammonia groove in order to reduce temperature of liquid ammonia,increase cooling energy of unit liquid ammonia,in the end achieves reducing power consumption of refrigerating machine.%简要分析合成氨冷冻系统在夏季生产时,一方面由于合成循环水温度居高不下,使出水冷器的合成气温度偏高,需要氨冷凝器提供更多的冷量;另一方面,从冷冻系统进入合成氨冷凝器的液氨受大气温度的影响,温度上升,使单位液氨提供冷量减少。两方面原因导致合成氨系统所需冷量增加,需加大冰机负荷,造成冰机耗电量上升。并介绍为解决这一问题,在冰机出口进液氨槽前增加一台换热器进一步冷却降低液氨温度,提高单位液氨的供冷量,从而降低冰机耗电量的技改措施。

  4. Absorption Enhancing Excipients in Systemic Nasal Drug Delivery

    Directory of Open Access Journals (Sweden)

    Edward T. Maggio

    2014-06-01

    Full Text Available Intranasal drug delivery is becoming an increasingly important form of drug administration for chronic and chronic-intermittent diseases. Important new applications in development include drugs for diabetes, osteoporosis, obesity, certain types of convulsive disorders, migraine headaches, symptomatic pain relief, nausea, and anxiety, among others. Transmucosal absorption across the nasal mucosa is generally limited to molecules under 1,000 Da in size. Systemic delivery of molecules larger than this requires formulation with a suitable transmucosal absorption enhancer. More than one hundred potential transmucosal absorption enhancing excipients have been tested to date. Nearly all have failed to be practical due to poor effectiveness or unacceptable toxicity to mucosal tissue. Alkylsaccharides, cyclodextrins, and chitosan's have emerged as the leading candidates for potential broad clinical applications and are allowing development of convenient, patient-friendly, needle free formulations of small molecule drugs, as well as peptide and protein drugs that can be administered at home, at work, or in other public and private settings outside of the doctor’s office or hospital environment.

  5. Simulation Model for Dynamic Operation of Double-Effect Absorption Chillers

    OpenAIRE

    Ahmed Mojahid Sid Ahmed Mohammed Salih; Gilani Syed Ihtsham Ul-Haq

    2014-01-01

    The development in the field of refrigeration and air conditioning systems driven by absorption cycles acquired a considerable importance recently. For commercial absorption chillers, an essential challenge for creating chiller model certainly is the shortage of components technical specifications. These kinds of specifications are usually proprietary for chillers producers. In this paper, a double-effect parallel-flow-type steam absorption chiller model based on thermodynamic and energy equa...

  6. Review of photovoltaic: powered refrigeration for vaccines for developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Field, R.L. (Texas A and M Univ., College Station); Carrasco, P.; de Quadros, C.A.

    1982-01-01

    The application of photovoltaic systems in immunization programs throughout the world is currently being evaluated, with the promise that photovoltaic systems may permit the extension of vaccine delivery systems by using alternative technologies in those areas where conventional forms of energy have yet to be introduced or are too costly. The cold chain is a system whose elements of logistics, equipment, and methodology are linked together to deliver vaccines in an efficient manner at temperatures between +4/sup 0/C to +8/sup 0/C. Vaccines are delicate substances and to keep them potent they must be kept cold from the time they are manufactured to the time of their administration. The cooling system of the vaccine refrigerator may be either of the conventional compression type or absorption type. The use of a direct current thermoelectric cooling system is also being considered. Either the compression or thermoelectric types may be PV powered, and there are incidental electricity needs with the kerosene powered absorption type. A small 10l size refrigerator should be capable of producing 1l of ice in the (8 hours of) night (in +32/sup 0/C design ambient) and must maintain temperature of +4 to +8/sup 0/C during the day (in +43/sup 0/C ambient). It is desirable that a 40l size produce 4l of ice per 24 h in a night-time ambient of +32/sup 0/C. with a COP (coefficient of performance) of 1.0, photocell net area of 1.3m/sup 2/ is needed for the designed compression of absorption type, and an area of 14.6m/sup 2/ is needed for the thermoelectric refrigerator of this size. An 80l size must be capable of producing 1-2l of ice per day (8l desirable). Costs are estimated at $800 for the 10l size, $1675 for 40l size and $3410 for 80l size, including photocells, batteries and refrigerator.

  7. 带有抽水压缩气体储能装置的制冷系统%Refrigeration System with Pumping Compressed Gas Energy Storage Device

    Institute of Scientific and Technical Information of China (English)

    李瑞雄; 王飞; 时文刚; 王焕然; 王峰

    2015-01-01

    To explore the new way of intermittent energy applications,a composite refrigeration system was proposed,which e-quips with pumping compressed air energy storage device.During the stage of energy storage,the refrigeration system converted e-lectric energy into internal energy of gas-pressurized through the water pump in the cabin;At the energy release stage,the internal water flow through turbine that will drive directly the cycle of refrigeration under the cabin’s gas-pressurized,and the heat of the condenser in refrigeration cycle is absorbed by high pressure gas inside the cabin,eventually completed the purposes of using in-termittent energy refrigeration.This paper established the thermodynamic model to describe the energy storage and refrigeration process,and focuses on the change of the key node thermodynamic parameters during storage and cooling process.Contrasting with the literature energy storage refrigeration system,this system has higher refrigeration coefficient.And it provides a new way for the development of intermittent energy application.%为开拓间歇式能源应用新途径,本文提出了一种复合制冷系统,该系统带有抽水压缩气体储能装置。在储能阶段,该储能制冷系统通过水泵将电能转换为水气共容舱内带压气体的内能;释能阶段,在水气共容舱内高压气体的作用下,使其内部的水流经水轮机直接驱动制冷循环制冷,而制冷循环中冷凝器所释放的能量被水气共容舱内的高压气体全部吸收,最终完成了利用间歇式能源制冷之目的。文中建立了描述储能与制冷过程的热力学模型,并重点研究了储能和制冷过程中关键节点的热力学参数变化规律,与文献给出的储能制冷系统相比,该系统具有较高的制冷系数。为拓展间歇式能源实际应用途径提供了一种新思路。

  8. Demonstration of an on-site PAFC cogeneration system with waste heat utilization by a new gas absorption chiller

    Energy Technology Data Exchange (ETDEWEB)

    Urata, Tatsuo [Tokyo Gas Company, LTD, Tokyo (Japan)

    1996-12-31

    Analysis and cost reduction of fuel cells is being promoted to achieve commercial on-site phosphoric acid fuel cells (on-site FC). However, for such cells to be effectively utilized, a cogeneration system designed to use the heat generated must be developed at low cost. Room heating and hot-water supply are the most simple and efficient uses of the waste heat of fuel cells. However, due to the short room-heating period of about 4 months in most areas in Japan, the sites having demand for waste heat of fuel cells throughout the year will be limited to hotels and hospitals Tokyo Gas has therefore been developing an on-site FC and the technology to utilize tile waste heat of fuel cells for room cooling by means of an absorption refrigerator. The paper describes the results of fuel cell cogeneration tests conducted on a double effect gas absorption chiller heater with auxiliary waste heat recovery (WGAR) that Tokyo Gas developed in its Energy Technology Research Laboratory.

  9. 采用CO2制冷剂的溜冰场制冷系统——介绍加拿大魁北克省一溜冰场制冷系统的更新改造案例%Ice Rink Uses CO2 Refrigeration System——A case study of renovation of ice rink refrigeration system in Canada

    Institute of Scientific and Technical Information of China (English)

    董天禄

    2012-01-01

      本文介绍了世界上第一台溜冰场用的采用CO2制冷剂的制冷系统。该项目是一个完全采用R744制冷剂(CO2)来代替原有的R22/甲醇制冷系统,获得很大的节能效果。%  In this paper the world’s first CO2 based refrigeration system used in ice rink is introduced. This project is a unique refrigeration system that uses the natural refrigerant R744 as primary and secondary working fluid to replace the existing R22 chiller/methanol system and a significant energy saving is achieved.

  10. Thermal design of lithium bromide-water solution vapor absorption cooling system for indirect evaporative cooling for IT pod

    Science.gov (United States)

    Sawant, Digvijay Ramkrishna

    Nowadays with increase use of internet, mobile there is increase in heat which ultimately increases the efficient cooling system of server room or IT POD. Use of traditional ways of cooling system has ultimately increased CO2 emission and depletion of CFC's are serious environmental issues which led scientific people to improve cooling techniques and eliminate use of CFC's. To reduce dependency on fossil fuels and 4environmental friendly system needed to be design. For being utilizing low grade energy source such as solar collector and reducing dependency on fossil fuel vapour absorption cooling system has shown a great driving force in today's refrigeration systems. This LiBr-water aabsorption cooling consists of five heat exchanger namely: Evaporator, Absorber, Solution Heat Exchanger, Generator, Condenser. The thermal design was done for a load of 23 kW and the procedure was described in the thesis. There are 120 servers in the IT POD emitting 196 W of heat each on full load and some of the heat was generated by the computer placed inside the IT POD. A detailed procedure has been discussed. A excel spreadsheet was to prepared with varying tube sizes to see the effect on flows and ultimately overall heat transfer coefficient.

  11. Feasibility study of a refrigeration system powered by natural gas; Estudo de viabilidade de um sistema de refrigeracao acionado a gas natural

    Energy Technology Data Exchange (ETDEWEB)

    Costa Filho, Manoel Antonio da Fonseca [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil). Faculdade de Engenharia; Biruel Filho, Jose [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

    2008-07-01

    This paper presents a technical, financial and environmental feasibility study, and market analysis, of a 50-TR chiller with vapor compression (mechanical) cycle powered by internal combustion engine. This type of equipment allows natural gas usage for medium-and-low-capacity refrigeration applications, for which there are not competitive commercial equipment based on absorption refrigeration cycle. The technical feasibility is not questionable because it is the association of two remarkably mature technologies and also because such equipment are common in Europe and USA. The natural gas powered equipment operation costs are lower than electricity powered ones, due to lower energy cost, while acquisition, installation and maintenance costs show the opposite. The Net Present Value is positive. The financial feasibility depends directly on the combination of prices of natural gas and electricity, as well as equipment energy efficiencies. The environmental analysis points to the use of electric-driven equipment, which avoids urban area emissions, reinforced by the hydroelectric generation, renewable, used in Brazil. This study had financial support from PETROBRAS/RedeGasEnergia. (author)

  12. Evaluation of the introduction of cogeneration for refrigeration in the fisheries sector of the Amazon; Avaliacao da introducao da cogeracao para refrigeracao no setor pesqueiro do Amazonas

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, Ricardo Wilson Aguiar da [Universidade Estadual do Amazonas (UEA), Manaus (Brazil)], e-mail: rcruz@uea.edu.br; Nebra, Silvia Azucena [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Faculdade de Engenharia Mecanica], e-mail: sanebra@fem.unicamp.br; Cartaxo, Elizabeth Ferreira [Universidade Federal do Amazonas (UFAM), Manaus, AM (Brazil)], e-mail: ecartaxo@ufam.edu.br

    2004-07-01

    This work analyses the opportunity to introduce cogeneration for the production of aquammonia absorption refrigeration in the autonomous Amazons State power system, by one hand as a means to improve its efficiency and by another, solve the deficiency the State has to store its fish-ing production. (author)

  13. Absorption line systems in simulated galaxies fed by cold streams

    CERN Document Server

    Fumagalli, Michele; Kasen, Daniel; Dekel, Avishai; Ceverino, Daniel; Primack, Joel R

    2011-01-01

    Hydro cosmological simulations reveal that massive galaxies at high redshift are fed by long narrow streams of merging galaxies and a smoother component of cold gas. We post-process seven high-resolution simulated galaxies with radiative transfer to study the absorption characteristics of the gas in galaxies and streams, in comparison with the statistics of observed absorption-line systems. We find that much of the stream gas is ionized by UV radiation from background and local stellar sources, but still optically thick (N_HI > 10^17 cm^2) so that the streams appear as Lyman-limit systems (LLSs). At z>3, the fraction of neutral gas in streams becomes non-negligible, giving rise to damped Lyman-alpha (DLA) absorbers as well. The gas in the central and incoming galaxies remains mostly neutral, responsible for DLAs. Within one (two) virial radii, the covering factor of optically thick gas is 30% of the observed absorbers in the foreground of quasars, the rest possibly arising from smaller galaxies or the interga...

  14. Adsorption refrigeration-green cooling driven by low grade thermal energy

    Institute of Scientific and Technical Information of China (English)

    WANG Ruzhu; WANG Liwei

    2005-01-01

    As a type of environmental benign refrigeration technology powered by low grade thermal energy, adsorption refrigeration have aroused more and more attention in recent years. In this paper, the research frontiers of adsorption refrigeration, including adsorbent, adsorption theory, heat recovery process, technology of adsorber, the research achievements, and the development achievements, are summarized. Typical systems for adsorption refrigeration research facing to applications in the recent years are presented. Future applications of adsorption refrigeration are analysed.

  15. New thermodynamical systems. Alternative of compression-absorption; Nouveaux systemes thermodynamiques. Alternative de la compression-absorption

    Energy Technology Data Exchange (ETDEWEB)

    Feidt, M.; Brunin, O.; Lottin, O.; Vidal, J.F. [Universite Henri Poincare Nancy, 54 - Vandoeuvre-les-Nancy (France); Hivet, B. [Electricite de France, 77 - Moret sur Loing (France)

    1996-12-31

    This paper describes a 5 years joint research work carried out by Electricite de France (EdF) and the ESPE group of the LEMTA on compression-absorption heat pumps. It shows how a thermodynamical model of machinery, completed with precise exchanger-reactor models, allows to simulate and dimension (and eventually optimize) the system. A small power prototype has been tested and the first results are analyzed with the help of the models. A real scale experiment in industrial sites is expected in the future. (J.S.) 20 refs.

  16. 低GWP制冷剂在住宅热泵系统中的性能%The Performance of Low GWP Refrigerants in a Residential Heat Pump System

    Institute of Scientific and Technical Information of China (English)

    周子成

    2015-01-01

    R410A是当前住宅热泵系统中的主要制冷剂之一。它的臭氧消耗潜能值为零,但是其全球气候变暖潜能值高达2088.找寻替代R410A的低GWP制冷剂已成为制冷空调业的一个重要任务。本文综述直接充灌试验方法和已取得的部分成果,%R410A is one of the main refrigerants used today for residential air conditioning and heat pump systems. It has zero ozone depletion potential but its global warming potential is high to 2088. Looking for new low GWP refriger-ants alternatives to replace R410A has become one of the most important goals of refrigeration and air conditioning in-dustry. In this paper,the drop-in test method and some results that have been achieved so far are summarized.

  17. Holographic Refrigerator

    CERN Document Server

    Nakamura, Shin

    2013-01-01

    We define an effective temperature and study its properties for a class of out-of-equilibrium steady states in a heat bath. Our analysis is based on the AdS/CFT correspondence, and examples include systems driven by applied electric fields and branes dragged in plasmas. We found that the effective temperature can be lower than that of the heat bath and that the out-of-equilibrium noise can be smaller than that in equilibrium. We show that a generalization of the fluctuation-dissipation relation holds for the effective temperature. In particular, we generalize the Johnson-Nyquist relation for large electric field.

  18. Commissioning of helium compression system for the 12 GeV refrigerator

    Science.gov (United States)

    Knudsen, P.; Ganni, V.; Dixon, K.; Norton, R.; Creel, J.; Arenius, D.

    2014-01-01

    The compressor system used for the Jefferson Lab (JLab) 12 GeV upgrade, also known as the CHL-2 compressor system, incorporates many design changes to the typical compressor skid design to improve the efficiency, reliability and maintainability from previous systems. These include a considerably smaller bulk oil separator design that does not use coalescing elements/media, automated control of cooling oil injection based on the helium discharge temperature, a helium after-cooler design that is designed for and promotes coalescing of residual oil and a variable speed bearing oil pump to reduce oil bypass. The CHL-2 helium compression system has five compressors configured with four pressure levels that supports the three pressure levels in the cold box. This paper will briefly review several of these improvements and discuss some of the recent commissioning results.

  19. The redshift number density evolution of Mg Ⅱ absorption systems

    Institute of Scientific and Technical Information of China (English)

    Zhi-Fu Chen

    2013-01-01

    We make use of the recent large sample of 17 042 Mg Ⅱ absorption systems from Quider et al.to analyze the evolution of the redshift number density.Regardless of the strength of the absorption line,we find that the evolution of the redshift number density can be clearly distinguished into three different phases.In the intermediate redshift epoch (0.6 ≤ z ≤ 1.6),the evolution of the redshift number density is consistent with the non-evolution curve,however,the non-evolution curve over-predicts the values of the redshift number density in the early (z ≤ 0.6) and late (z ≥ 1.6) epochs.Based on the invariant cross-section of the absorber,the lack of evolution in the redshift number density compared to the non-evolution curve implies the galaxy number density does not evolve during the middle epoch.The fiat evolution of the redshift number density tends to correspond to a shallow evolution in the galaxy merger rate during the late epoch,and the steep decrease of the redshift number density might be ascribed to the small mass of halos during the early epoch.

  20. Refrigerant Charge Management and Control for Next-Generation Aircraft Vapor Compression Systems (Postprint)

    Science.gov (United States)

    2013-09-01

    Compressor Oil Separator Condenser Receiver VCSRF System (R134a) Liquid Injection Cooling Glycol Load Oil Filter / Driers T TT T P, T P, T...Advanced electronic packages are challenging aircraft thermal management systems (TMS) in terms of higher cooling loads. This trend is forecast to...includes a variable speed screw compressor from Fairchild Controls Corporation, a Danfoss 70kW condenser (B3-095-72-H), two Emerson expansion valves

  1. Vaccine refrigeration: thinking outside of the box.

    Science.gov (United States)

    McColloster, Patrick J; Martin-de-Nicolas, Andres

    2014-01-01

    This commentary reviews recent changes in Centers for Disease Control (CDC) vaccine storage guidelines that were developed in response to an investigative report by the Office of the Inspector General. The use of temperature data loggers with probes residing in glycol vials is advised along with storing vaccines in pharmaceutical refrigerators. These refrigerators provide good thermal distribution but can warm to 8 °C in less than one hour after the power is discontinued. Consequently, electric grid instability influences appropriate refrigerator selection and the need for power back-up. System Average Interruption Duration Index (SAIDI) values quantify this instability and can be used to formulate region-specific guidelines. A novel aftermarket refrigerator with a battery back-up power supply and microprocessor control system is also described.

  2. Steady state simulation of a double-effect steam absorption chiller

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, M.S.A.M.S.; Gilani, S.I.U.H. [Universiti Teknologi Petronas, Tronoh, Perak (Malaysia). Dept. of Mechanical Engineering

    2011-07-01

    Absorption cooling systems have become increasingly popular in recent years from the viewpoint of energy and environment. Despite a lower coefficient of performance (COP) as compared to the vapor compression, absorption refrigeration systems are attractive for using inexpensive waste heat, solar, geothermal or biomass energy sources for which the cost of supply is negligible in many cases. In addition absorption refrigeration uses natural substances which do not contribute towards ozone depletion and global warming. Owing to the serious environmental problems and the price of the traditional energy resources, the use of industrial waste heat or renewable energy as the driving force for vapor absorption cooling systems is continuously increasing. A steady-state model is developed to predict the performance of an absorption refrigeration system using LiBr-water as working pair. Each component of the cycle is modelled based on mass and energy balances. The design point parameters are determined. The refrigeration effect, coefficient of performance and load factor are analyzed for different heat input. Simulation is carried out and the results are compared with actual data and showed good agreement.

  3. Li-ion battery thermal runaway suppression system using microchannel coolers and refrigerant injections

    Energy Technology Data Exchange (ETDEWEB)

    Bandhauer, Todd M.; Farmer, Joseph C.

    2016-11-08

    A battery management system with thermally integrated fire suppression includes a multiplicity of individual battery cells in a housing; a multiplicity of cooling passages in the housing within or between the multiplicity of individual battery cells; a multiplicity of sensors operably connected to the individual battery cells, the sensors adapted to detect a thermal runaway event related to one or more of the multiplicity of individual battery cells; and a management system adapted to inject coolant into at least one of the multiplicity of cooling passages upon the detection of the thermal runaway event by the any one of the multiplicity of sensors, so that the thermal runaway event is rapidly quenched.

  4. Model Predictive Control for Flexible Power Consumption of Large-Scale Refrigeration Systems

    DEFF Research Database (Denmark)

    Shafiei, Seyed Ehsan; Stoustrup, Jakob; Rasmussen, Henrik

    2014-01-01

    , the control method can be employed for regulating power services in the smart grid. The proposed scheme contains the control of cooling capacity as well as optimizing the efficiency factor of the system, which is in general a nonconvex optimization problem. By introducing a fictitious manipulated variable...

  5. 单级自动复叠混合工质制冷循环的实验研究%Experimental research on refrigerant mixtures of a single-stage auto-cascade refrigeration system

    Institute of Scientific and Technical Information of China (English)

    朱军韬; 张华

    2012-01-01

    Owing to the limit of compresser ratio, single - stage refrigeration cycle using single refrigerant did not develop fast. The experimental research on applying refrigerant mixtures in single - stage refrigeration cycle was conducted and acquired a preferably refrigeration effect. A theoretical simulation was analyzed and an experimental test was built to do comparative analysis. An exploratory optimal refrigeration mixtures (R600a/R23) was acquired through the theoretical and experimental research.%由于压缩机压比的局限,制约着单一制冷剂的压缩回热循环发展,本系统采用单一压缩机和混合工质的自复叠制冷循环系统取得了较好的制冷效果.文中对单级自动复叠制冷系统进行了理论模拟,并设计和搭建了实验台进行分析.通过理论和实验数据的分析得出混合工质组合R600a/R23,并初步得到最优配比.

  6. 二氧化碳复叠式制冷系统实验研究%Experimental Research on a CO2 Based Cascade Refrigeration System

    Institute of Scientific and Technical Information of China (English)

    陈林; 张信荣

    2013-01-01

    In this paper a novel CO2 based cascade refrigeration system is proposed and experimentally investigated. The system used natural CO2 as working fluid. The cascade system is consisted of a High Temperature Cycle (HTC) and a Low Temperature Cycle (LTC). The two parts are connected by an internal heat exchanger. This is the first cascade refrigeration system proposed. Based on the CO2 solid-gas two phase sublimation flow, stable heat transfer and refrigeration can be achieved. In the present paper the feasibility and fundamental optimizations are discussed. Detailed information on the system behavior and the parameters are also present in the paper.%  本研究提出了一种基于CO2固气两相升华流动的复叠式制冷系统.系统采用环保的天然工质CO2作为冷媒.复叠式制冷系统由高温循环(HTC:High Temperature Cycle)和低温循环(LTC:Low Temperature Cycle)二个部分构成.两部分用一个中间换热器相连接.本文提出 CO2两级复叠式循环概念并进行了实验测试,利用 CO2固气两相升华流动潜热潜力,可以同时实现低于-56.6℃的制冷和80℃以上的制热.通过实验和理论计算,两级系统成功地同时实现了以上功能.此外,本文还总结了基本实验特性并做了相应的系统优化设计和分析.

  7. Laser stabilization using saturated absorption in a cavity QED system

    CERN Document Server

    Tieri, D A; Christensen, Bjarke T R; Thomsen, J W; Holland, M J

    2015-01-01

    We consider the phase stability of a local oscillator (or laser) locked to a cavity QED system comprised of atoms with an ultra-narrow optical transition. The atoms are cooled to millikelvin temperatures and then released into the optical cavity. Although the atomic motion introduces Doppler broadening, the standing wave nature of the cavity causes saturated absorption features to appear, which are much narrower than the Doppler width. These features can be used to achieve an extremely high degree of phase stabilization, competitive with the current state-of-the-art. Furthermore, the inhomogeneity introduced by finite atomic velocities can cause optical bistability to disappear, resulting in no regions of dynamic instability and thus enabling a new regime accessible to experiments where optimum stabilization may be achieved.

  8. Model predictive control technologies for efficient and flexible power consumption in refrigeration systems

    DEFF Research Database (Denmark)

    Hovgaard, Tobias Gybel; Larsen, Lars F. S.; Edlund, Kristian;

    2012-01-01

    . In this paper we describe a novel economic-optimizing Model Predictive Control (MPC) scheme that reduces operating costs by utilizing the thermal storage capabilities. A nonlinear optimization tool to handle a non-convex cost function is utilized for simulations with validated scenarios. In this way we...... for the system itself, while crucial services can be delivered to a future flexible and intelligent power grid (Smart Grid). Furthermore, we discuss a novel incorporation of probabilistic constraints and Second Order Cone Programming (SOCP) with economic MPC. A Finite Impulse Response (FIR) formulation...... of the system models allows us to describe and handle model as well as prediction uncertainties in this framework. This means we can demonstrate means for robustifying the performance of the controller....

  9. Development of a Hybrid Ejector-Compressor Refrigeration System with Improved Efficiency

    OpenAIRE

    Gutiérrez Ortiz, Alejandro

    2016-01-01

    The present doctoral dissertation addresses the design of an ejector suitable for a thermally driven hybrid ejector-compressor cooling system; research was aimed at improving the performance of the ejector in terms of both critical backpressure and entrainment ratio. An ejector efficiency analysis is presented to establish a theoretical limit for the maximum achievable entrainment ratio of an ejector undergoing a fully reversible process without entropy generation; the main sources of irre...

  10. Theoretical Analysis of a Novel Integrated Energy System Formed by a Microturbine and an Exhaust Fired Single-Double Effect Absorption Chiller

    Directory of Open Access Journals (Sweden)

    Dieter Boer

    2006-03-01

    Full Text Available Integrated Energy Systems (IES combine a distributed power generation system (DG such as a microturbine generator (MTG or a fuel cell with thermally activated technologies (TAT such as absorption cooling. This integration maximizes the efficiency of energy use by utilizing on-site most of the waste heat generated by DG, and reduces harmful emissions to the environment. This study investigates the energy and exergy performance of an IES. This system is comprised of an MTG with internal recuperator and a novel absorption cooling cycle. The absorption cycle is a single-double effect exhaust fired cycle, which recuperates the heat exchanged from the MTG exhaust gases using two generators at two different levels of temperature. The selection of the DG element, the TAT element and their internal configurations is based upon a real IES commercial unit that has been tested in the APEP-UCI DG testing facilities in Irvine, California. This unit has an electrical power capacity of 28 kW and a cooling capacity of 14 refrigeration tons (49.2 kW. Inputs for the thermodynamic models developed for the MTG and for the absorption cycle are derived from experimental variables that will be controlled in the testing phase. The MTG model is using empirical correlations for key model parameters (pressure ratio, turbine inlet temperature, etc. from previous studies in order to predict the observed change in performance with part load operation. The calculated mass flow rate and temperature of the exhaust gases are inputs for the absorption cycle model, together with cooling and chilled water inlet temperatures and flow rates. Heat and mass transfer efficiencies along with heat transfer coefficients for the suite of heat exchangers comprising the single-double effect absorption cycle are determined from proprietary testing data provided by the manufacturers.

  11. 太阳能喷射制冷系统的热力学(火用)分析%Exergy analysis of the solar jet refrigeration system

    Institute of Scientific and Technical Information of China (English)

    李秋平; 于文艳

    2012-01-01

    Exergy analysis is used to analyze the performance of the solar jet refrigeration system. Distribution of the exergy loss in each component is calculated and the cause is analyzed. Effect of the entrainment ratio on the exergy loss of the system and the exergy loss percentage of each component in the refrigeration cycle are also given. The analysis results show that the most significant loss in the solar jet refrigeration system is the solar collector, the second are the condenser and the ejector. Thus, it is very important to optimize the entrainment ratio of the ejector in order to decrease the exergy loss and improve the efficiency of the system.%利用(火用)分析法对太阳能喷射制冷系统进行分析,了解系统各部件的(火用)损分布情况,并分析其原因,给出了系统总(火用)损随喷射系数变化的规律和喷射制冷循环各部件的(火用)损百分比随喷射系数变化的规律,为优化系统提供依据.分析结果表明:太阳能喷射制冷系统中,太阳能集热器的(火用)损最大,其次是冷凝器和喷射器;提高喷射器的喷射系数对于降低系统(火用)损、提高系统效率至关重要.

  12. Modelling of the generation phase of an absorption cooling cycle operating intermittently; Modelisation de la phase generation d'un cycle de refrigeration par absorption solaire a fonctionnement intermittent

    Energy Technology Data Exchange (ETDEWEB)

    Boukhchana, Yasmina; Fellah, Ali; Ben Brahim, Ammar [Unite de Recherche, Thermodynamique Appliquee (99/UR/11-21), Universite de Gabes, Ecole Nationale d' ingenieurs, 6072 Gabes (Tunisia)

    2011-01-15

    No abstract prepared. [French] La modelisation en regime dynamique de la phase generation d'une installation frigorifique a absorption solaire a fonctionnement intermittent utilisant le couple ammoniac/eau a ete elaboree. L'etude basee sur l'intermittence du fonctionnement a permis d'elaborer, a travers les bilans matieres et thermiques, un modele thermodynamique reliant les temperatures, les debits et les fractions massiques dans les differents compartiments. Des journees ensoleillees representatives des quatre saisons de l'annee ont ete considerees. Les variations du taux d'ensoleillement, des temperatures et des concentrations ont ete explorees. Les resultats ont montre, moyennant les hypotheses adoptees en particulier a pression de fonctionnement constante, que la demarche proposee a permis d'avoir une temperature de generation autour de 135 C et une temperature de condensation de 60 C. Ces temperatures sont atteinte par l'adaptation de la convection naturelle a l'air pour le fonctionnement du condenseur. (orig.)

  13. Fault detection and diagnosis for refrigerator from compressor sensor

    Energy Technology Data Exchange (ETDEWEB)

    Keres, Stephen L.; Gomes, Alberto Regio; Litch, Andrew D.

    2016-12-06

    A refrigerator, a sealed refrigerant system, and method are provided where the refrigerator includes at least a refrigerated compartment and a sealed refrigerant system including an evaporator, a compressor, a condenser, a controller, an evaporator fan, and a condenser fan. The method includes monitoring a frequency of the compressor, and identifying a fault condition in the at least one component of the refrigerant sealed system in response to the compressor frequency. The method may further comprise calculating a compressor frequency rate based upon the rate of change of the compressor frequency, wherein a fault in the condenser fan is identified if the compressor frequency rate is positive and exceeds a condenser fan fault threshold rate, and wherein a fault in the evaporator fan is identified if the compressor frequency rate is negative and exceeds an evaporator fan fault threshold rate.

  14. Understanding Absorptive Capacities is an "Innovation Systems" Context

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    2004-01-01

    This paper seeks to broaden our understanding of the concept underlying absorptive capacity atthe macro -level, paying particular attention to the growth and development perspectives. Weprovide definitions of absorptive and technological capacity, external technology flows,productivity growth....... We also undertake to explain how the nature ofabsorptive capacity changes with stages of economic development, and the importance of thedifferent aspects of absorptive capability at different stages. The relationship is not a linear one:the benefits that accrue from marginal increases in absorptive...... capability change over time.Finally, we provide a tentative and preliminary conceptual argument of how the different stagesof absorptive capacity are related to productivity growth, economic growth and employmentcreation.Key words: New economy, absorptive capacity, knowledge...

  15. Thermal links for the implementation of an optical refrigerator

    Energy Technology Data Exchange (ETDEWEB)

    Epsteiin, Richard I [Los Alamos National Laboratory; Greenfield, Scott R [Los Alamos National Laboratory; Parker, John [HARVEY MUDD COLLEGE; Mar, David [HARVEY MUDD GOLLEGE; Von Der Porten, Steven [HARVEY MUDD COLLEGE; Hankinson, John [HARVEY MUDD COLLEGE; Byram, Kevin [HARVEY MUDD COLLEGE; Lee, Chris [HARVEY MUDD COLLEGE; Mayeda, Kai [HARVEY MUDD COLLEGE; Haskell, Richard [HARVEY MUDD COLLEGE; Yang, Qimin [HARVEY MUDD COLLEGE

    2008-01-01

    Optical refrigeration has been demonstrated by several groups of researchers, but the cooling elements have not been thermally linked to realistic heat loads in ways that achieve the desired temperatures. The ideal thermal link will have minimal surface area, provide complete optical isolation for the load, and possess high thermal conductivity. We have designed thermal links that minimize the absorption of fluoresced photons by the heat load using multiple mirrors and geometric shapes including a hemisphere, a kinked waveguide, and a tapered waveguide. While total link performance is dependent on additional factors, we have observed net transmission of photons with the tapered link as low as 0.04%. Our optical tests have been performed with a surrogate source that operates at 625 nm and mimics the angular distribution of light emitted from the cooling element of the Los Alamos solid state optical refrigerator. We have confirmed the optical performance of our various link geometries with computer simulations using CODE V optical modeling software. In addition we have used the thermal modeling tool in COMSOL MULTIPHYSICS to investigate other heating factors that affect the thermal performance of the optical refrigerator. Assuming an ideal cooling element and a nonabsorptive dielectric trapping mirror, the three dominant heating factors are (1) absorption of fluoresced photons transmitted through the thermal link, (2) blackbody radiation from the surrounding environment, and (3) conductive heat transfer through mechanical supports. Modeling results show that a 1 cm{sup 3} load can be chilled to 107 K with a 100 W pump laser. We have used the simulated steady-state cooling temperatures of the heat load to compare link designs and system configurations.

  16. Evaluación de un Sistema de Refrigeración usando la Termodinámica Endorreversible Refrigeration System Evaluation using Endoreversible Thermodynamics

    Directory of Open Access Journals (Sweden)

    P. Quinto

    2005-01-01

    Full Text Available En este artículo se hace uso de la termodinámica endorreversible para evaluar el comportamiento de un sistema de refrigeración por compresión mecánica de vapor. Se describe la obtención del Coeficiente de Operación del ciclo de Carnot de refrigeración endorreversible (COP CE, en el que se consideran las irreversibilidades externas asociadas a la transferencia de calor. Con los valores de presiones y temperaturas obtenidos experimentalmente en un sistema de refrigeración por compresión mecánica de vapor, se calcularon, a el Coeficiente de Operación real (COP R, b el Coeficiente de Operación de Carnot reversible (COP C y c el Coeficiente de Carnot endorreversible (COP CE. Se hizo la comparación de estos resultados y se llegó a la conclusión que es el COP CE, el parámetro que debe usarse para establecer los límites teóricos del comportamiento de la operación de los sistemas de refrigeración, y no el COP C, como tradicionalmente se ha hecho.This paper describes the use of endoreversible thermodynamics to evaluate the behavior of a mechanical compression refrigeration system. The coefficients of performance of the endoreversible Carnot Cycle, COP CE, were obtained by including the external irreversibility associated with heat transfer. The real coefficient of performance (COP R, the reversible Carnot coefficient of performance (COP C and the endorreversible Carnot coefficient of performance (COP CE were determined using experimentally obtained pressures and temperatures. The results were compared with experimental data from a laboratory refrigeration system, and the conclusion was that the COP CE was the parameter of choice for setting the theoretical limits for refrigeration system operation instead of the COP C as has been conventionally done.

  17. Weather Effect on the Solar Adsorption Air-conditioning System using Activated Carbon Fiber/Ethanol as Pair of Refrigeration: A Case Study of Malaysia

    Directory of Open Access Journals (Sweden)

    Alkhair M. Abdul Majeed

    2014-02-01

    Full Text Available This study indicates the simulation analysis of the solar adsorption cycle using the activated carbon fiber/ethanol as the pair of refrigeration in Malaysia. The heat source used was evacuated tube collectors. The cycle is used for the purpose of air-conditioning for two temperature levels, where the cooling load can be 7°C. TRNSYS simulation software was used to model the system with the weather data of Malaysia. The results showed that the weather has a high effect on the performance of the cycle. Both the cooling capacity and the COP were calculated in this study.

  18. The toxicity of refrigerants

    Energy Technology Data Exchange (ETDEWEB)

    Calm, J.M.

    1996-07-01

    This paper presents toxicity data and exposure limits for refrigerants. The data address both acute (short-term, single exposure) and chronic (long-term, repeated exposure) effects, with emphasis on the former. The refrigerants covered include those in common use for the last decade, those used as components in alternatives, and selected candidates for future replacements. The paper also reviews the toxicity indicators used in both safety standards and building, mechanical, and fire codes. It then outlines current classification methods for refrigerant safety and relates them to standard and code usage.

  19. Rapidly reconfigurable slow-light system based on off-resonant Raman absorption

    Science.gov (United States)

    Vudyasetu, Praveen K.; Camacho, Ryan M.; Howell, John C.

    2010-11-01

    We present a slow-light system based on dual Raman absorption resonances in warm rubidium vapor. Each Raman absorption resonance is produced by a control beam in an off-resonant Λ system. This system combines all optical control of the Raman absorption and the low-dispersion broadening properties of the double Lorentzian absorption slow light. The bandwidth, group delay, and central frequency of the slow-light system can all be tuned dynamically by changing the properties of the control beam. We demonstrate multiple pulse delays with low distortion and show that such a system has fast switching dynamics and thus fast reconfiguration rates.

  20. Research on Automation Control Unit of Drilling Fluid Refrigeration System for Natural Gas Hydrate Explora-tion%天然气水合物勘探泥浆制冷系统温控单元的改进研究

    Institute of Scientific and Technical Information of China (English)

    李家晟; 孙友宏; 郭威; 刘卫卫

    2013-01-01

    According the problems of natural gas hydrates drilling fluid refrigeration system in the using process, such as improper manual operation, system paralysis caused by some abnormal factors of the equipment and frequent manual switc-hing on and off of refrigeration cryogenic medium circulating pump, the intelligent temperature control unit was added based on the original system to improve the automation degree of drilling fluid refrigeration system for natural gas hydrates.The important hidden dangers of the refrigeration process are solved to ensure the normal process of drilling fluid refrigeration.%针对天然气水合物钻井泥浆制冷系统在使用过程中,人为操作不当或某些设备异常造成系统瘫痪及需要人工频繁开关载冷剂循环泵等问题,在原有系统基础上加入智能温控单元。提高了天然气水合物钻井泥浆制冷系统的自动化程度,解决了制冷过程中的重要隐患,以确保泥浆制冷过程正常进行。