Tensile and fracture behavior of AA6061-T6 aluminum alloys: micro-mechanical approach

International Nuclear Information System (INIS)

Shen, Y.

2012-01-01

The AA6061-T6 aluminum alloy was chosen as the material for the core vessel of the future Jules Horowitz testing reactor (JHR). The objective of this thesis is to understand and model the tensile and fracture behavior of the material, as well as the origin of damage anisotropy. A micro-mechanical approach was used to link the microstructure and mechanical behavior. The microstructure of the alloy was characterized on the surface via Scanning Electron Microscopy and in the 3D volume via synchrotron X-ray tomography and laminography. The damage mechanism was identified by in-situ SEM tensile testing, ex-situ X-ray tomography and in-situ laminography on different levels of triaxiality. The observations have shown that damage nucleated at lower strains on Mg 2 Si coarse precipitates than on iron rich intermetallics. The identified scenario and the in-situ measurements were then used to develop a coupled GTN damage model incorporating nucleation, growth and coalescence of cavities formed by coarse precipitates. The relationship between the damage and the microstructure anisotropies was explained and simulated. (author)

Special grain boundaries in the nugget zone of friction stir welded AA6061-T6 under various welding parameters

Energy Technology Data Exchange (ETDEWEB)

Tao, Wang [Key Lab of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China); Yong, Zou, E-mail: yzou@sdu.edu.cn [Key Lab of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China); Xuemei, Liu [Key Lab of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China); Matsuda, Kenji [Department of Materials Science and Technology, Faculty of Engineering, University of Toyama, Toyama 930-8555 (Japan)

2016-08-01

The age hardenable AA6061-T6 plate was butt welded by friction stir welding. The total heat input, generated by friction between the tool and work piece and plastic deformation, results in a consumption of meta-stable phases in the nugget zone. Precipitation phenomena were closely related to the diffusion of the solute atoms. The existence of special grain boundaries like Σ1a and Σ3 will increase the difficulty in diffusion, which will improve the hardness in the nugget zone. Furthermore, the formation of Σ3 grain boundaries can result from an impingement of re-crystallized grains coming from texture components in twin relationship already. An appropriate strain level may benefit the development of the twin components with a similar intensity. The welding parameters have an effect on heat source mode and the strain level. Then, the type of dynamic re-crystallization and distribution of the special grain boundaries was altered by changing the parameters.

A Preliminary Report on the Strength and Metallography of a Bimetallic Friction Stir Weld Joint Between AA6061 and MIL-DTL-46100E High Hardness Steel Armor

Science.gov (United States)

2012-11-26

bimetallic friction stir weld joint between AA6061 and MIL-DTL-46100E High Hardness steel armor. ABSTRACT One half inch thick plates of 6061-T6 aluminum...alloy and High Hardness steel armor (MIL- STD-46100) were successfully joined by the friction stir welding (FSW) process using a tungsten-rhenium...4. TITLE AND SUBTITLE A preliminary report on the strength and metallography of a bimetallic friction stir weld joint between AA6061 and MIL-DTL

Microstructure and hardness performance of AA6061 aluminium composite using friction stir processing

Science.gov (United States)

Marini, C. D.; Fatchurrohman, N.

2018-04-01

Rice husk ash (RHA) is an industrial waste that has become a potential reinforced material for aluminium matrix composite (AMCs) due to low cost and abundantly available resources. Friction stir processing (FSP) has been introduced as a method to modify surface properties of the metal and alloy including theirs composite as well. The present work reports the production and characterization of AA6061 and AA6061/5 vol% RHA using FSP using parameters rotation speed 1000 rpm and traversed speed 25 mm/min. The microstructure was studied using optical microscopy (OM). A homogenous dispersion of RHA particles was obtained in the composite. No agglomeration or segregation was observed. The produced composite exhibited a fine grain structure. An improvement in hardness profile was observed as AA6061/5 vol% RHA improves in hardness compared to FSPed of AA6061 without reinforcement.

Mechanical Properties Of AA 6061-T6 Aluminum Alloy Friction Stir Welds

Directory of Open Access Journals (Sweden)

Asmaa M. Abdullah

2015-06-01

Full Text Available The different parameters on mechanical and microstructural properties of aluminium alloy 6061-T6 Friction stir-welded (FSW joints were investigated in the present study. Different welded specimens were produced by employing variable rotating speeds and welding speeds. Tensile strength of the produced joints was tested at room temperature and the the effecincy was assessed, it was 75% of the base metal at rotational speed 1500 rpm and weld speed 50 mm/min. Hardness of various zones of FSW welds are presented and analyzed by means of brinell hardness number . Besides to thess tests the bending properties investigated and showed good results in some specimen and not in onother the mamximum stress was 240 N/mm2 at rotational speed 1500 rpm and weld speed 50 mm/min , while the maximum stress at 1250 rpm and 75 mm/min 94 N/mm2 , hardness results shwed lower values in heat affected and nugget zones than the base metal with improving of hardness at 1500 rpm, 75 mm/min .

Super Polishing of Aluminum 6061-T6 Mirrors, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — An innovative 2D super-polishing process for Aluminum 6061-T6 planar mirrors which removes diamond point turning (DPT) grooves and attains rms surface finishes below...

Effects of pH and chloride concentration on pitting corrosion of AA6061 aluminum alloy

International Nuclear Information System (INIS)

Zaid, B.; Saidi, D.; Benzaid, A.; Hadji, S.

2008-01-01

Effects of pH solution and chloride (Cl - ) ion concentration on the corrosion behaviour of alloy AA6061 immersed in aqueous solutions of NaCl have been investigated using measurements of weight loss, potentiodynamic polarisation, linear polarisation, cyclic polarisation experiment combined with open circuit potential transient technique and optical or scanning electron microscopy. The corrosion behaviour of the AA6061 aluminum alloy was found to be dependant on the pH and chloride concentration [NaCl] of solution. In acidic or slightly neutral solutions, general and pitting corrosion occurred simultaneously. In contrast, exposure to alkaline solutions results in general corrosion. Experience revealed that the alloy AA6061 was susceptible to pitting corrosion in all chloride solution of concentration ranging between 0.003 wt% and 5.5 wt% NaCl and an increase in the chloride concentration slightly shifted both the pitting E pit and corrosion E cor potentials to more active values. In function of the conditions of treatment, the sheets of the alloy AA6061 undergo two types of localised corrosion process, leading to the formation of hemispherical and crystallographic pits. Polarisation resistance measurements in acidic (pH = 2) and alkaline chloride solutions (pH = 12) which are in good agreement with those of weight loss, show that the corrosion kinetic is minimised in slightly neutral solutions (pH = 6)

Long term immersion test of aluminum alloy AA 6061 used for fuel cladding in MTR type reactors

International Nuclear Information System (INIS)

Linardi, Evelina M.; Rodriguez, Sebastian; Haddad, Roberto; Lanzani, Liliana

2009-01-01

In this work we present the results of long term immersion tests performed in the aluminum alloy AA 6061, used for fuel cladding in MTR type reactors. The tests were performed at open circuit potential in high purity water (ρ = 18.2 MΩ.cm) and in 10 -3 M NaCl solution. Two kinds of assemblies were studied: simple sheets and artificial crevices, immersed during 6, 12 and 18 months at room temperature. In both media and both assemblies, the aluminum hydroxide phases crystalline bayerite and bohemite were identified. It was found that a kind of localized attack named alkaline attack occurs around the iron-rich intermetallics. These particles were confirmed to control the corrosion of the AA 6061 alloy in an aerated medium. Immersion times for up to 18 months did not increase the oxide growth or the alkaline attack on the AA 6061 alloy. (author)

Microstructural Characterization of the U-9.1Mo Fuel/AA6061 Cladding Interface in Friction-Bonded Monolithic Fuel Plates Irradiated in the RERTR-6 Experiment

Science.gov (United States)

Keiser, Dennis D.; Jue, Jan-Fong; Miller, Brandon; Gan, Jian; Robinson, Adam; Medvedev, Pavel; Madden, James; Wachs, Dan; Clark, Curtis; Meyer, Mitch

2015-09-01

Low-enrichment (235U < 20 pct) U-Mo monolithic fuel is being developed for use in research and test reactors. The earliest design for this fuel that was investigated via reactor testing consisted of a nominally U-10Mo fuel foil encased in AA6061 (Al-6061) cladding. For a fuel design to be deemed adequate for final use in a reactor, it must maintain dimensional stability and retain fission products throughout irradiation, which means that there must be good integrity at the fuel foil/cladding interface. To investigate the nature of the fuel/cladding interface for this fuel type after irradiation, fuel plates were fabricated using a friction bonding process, tested in INL's advanced test reactor (ATR), and then subsequently characterized using optical metallography, scanning electron microscopy, and transmission electron microscopy. Results of this characterization showed that the fuel/cladding interaction layers present at the U-Mo fuel/AA6061 cladding interface after fabrication became amorphous during irradiation. Up to two main interaction layers, based on composition, could be found at the fuel/cladding interface, depending on location. After irradiation, an Al-rich layer contained very few fission gas bubbles, but did exhibit Xe enrichment near the AA6061 cladding interface. Another layer, which contained more Si, had more observable fission gas bubbles. In the samples produced using a focused ion beam at the interaction zone/AA6061 cladding interface, possible indications of porosity/debonding were found, which suggested that the interface in this location is relatively weak.

Design and Analysis of Wind Turbine Blade Hub using Aluminium Alloy AA 6061-T6

Science.gov (United States)

Ravikumar, S.; Jaswanthvenkatram, V.; Sai kumar, Y. J. N. V.; Sohaib, S. Md.

2017-05-01

This work presents the design and analysis of horizontal axis wind turbine blade hub using different material. The hub is very crucial part of the wind turbine, which experience the loads from the blades and the loads were transmitted to the main shaft. At present wind turbine is more expensive and weights more than a million pounds, with the nacelle, rotor hub and blades accounting for most of the weight. In this work Spheroidal graphite cast iron GGG 40.3 is replaced by aluminium alloy 6061-T6 to enhance the casting properties and also to improve the strength-weight ratio. This transition of material leads to reduction in weight of the wind turbine. All the loads caused by wind and extreme loads on the blades are transferred to the hub. Considering the IEC 61400-1 standard for defining extreme loads on the hub the stress and deflection were calculated on the hub by using Finite element Analysis. Result obtained from ANSYS is compared and discussed with the existing design.

Interdependent effect of chemical composition and thermal history on artificial aging of AA6061

International Nuclear Information System (INIS)

Pogatscher, S.; Antrekowitsch, H.; Uggowitzer, P.J.

2012-01-01

In this study, the interdependent effect of chemical composition and thermal history on artificial aging was investigated for the aluminum alloy AA6061. Based on thermodynamic calculations, including Al, Fe, Cr, Zn, Ti, Mg, Si and Cu, model alloys exhibiting a maximum variation of the reachable solute super-saturation of elements relevant for precipitation hardening within the compositional limits of AA6061 were produced. The artificial aging behavior of these alloys at 175 °C was studied by tensile testing for two thermal histories, including very short- and long-term room temperature storage after quenching. Precipitation during artificial aging was investigated by an analysis of yield strength data. As generally expected, precipitation kinetics was found to depend strongly on the solute super-saturation in the case of very short room temperature storage. For artificial aging after long-term room temperature storage the kinetics showed almost no dependence on the chemical composition. This seems to be an exception from simple precipitation kinetics and can be explained based on the complex role of quenched-in vacancies in artificial aging of AA6061.

Thermal efficiency on welding of AA6061-T6 alloy by modified indirect electric arc and current signals digitalisation

International Nuclear Information System (INIS)

Ambriz, R. R.; Barrera, G.; Garcia, R.; Lopez, V. H.

2009-01-01

The results of the thermal efficiency on welding by modified indirect electric arc technique (MIEA) [1] of the 6061- T6 aluminum alloy are presented. These values are in a range of 90 to 94 %, which depend of the preheating employed. Thermal efficiency was obtained by means of a balance energy which considers the heat input, the amount of melted mass of the welding profiles, and welding parameters during the joining, especially of the arc current data acquisition. Also, some dimensionless parameters were employed in order to determine the approximation grade of the melted pool, the heat affected zone (HAZ), and their corresponding values with the experimental results. (Author) 13 refs

Prevention of non-ductile fracture in 6061-T6 aluminum nuclear pressure vessels

International Nuclear Information System (INIS)

Yahr, G.T.

1995-01-01

The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Committee has approved rules for the use of 6061-T6 and 6061-T651 aluminum for the construction of Class 1 welded nuclear pressure vessels for temperatures not exceeding 149 C (300 F). Nuclear Code Case N-519 allows the use of this aluminum in the construction of low temperature research reactors such as the Advanced Neutron Source. The rules for protection against non-ductile fracture are discussed. The basis for a value of 25.3 MPa √m (23 ksi √in.) for the critical or reference stress intensity factor for use in the fracture analysis is presented. Requirements for consideration of the effects of neutron irradiation on the fracture toughness are discussed

Microstructure, mechanical properties and texture of an AA6061/AA5754 composite fabricated by cross accumulative roll bonding

Energy Technology Data Exchange (ETDEWEB)

Verstraete, K., E-mail: kevin.verstraete@u-psud.fr [Université Paris-Sud, SP2M, ICMMO, UMR CNRS 8182, 91405 Orsay Cedex (France); Helbert, A.L. [Université Paris-Sud, SP2M, ICMMO, UMR CNRS 8182, 91405 Orsay Cedex (France); Brisset, F. [Université Paris-Sud, ICMMO, UMR CNRS 8182, 91405 Orsay Cedex (France); Benoit, A.; Paillard, P. [Institut des Matériaux Jean Rouxel (IMN), UMR 6502, Polytech’Nantes, Nantes Cedex (France); Baudin, T. [Université Paris-Sud, SP2M, ICMMO, UMR CNRS 8182, 91405 Orsay Cedex (France)

2015-07-29

AA6061 alloy is a widely used material in the automotive and aerospace industries, but is prone to hot cracking, which limits its weldability. To prevent this phenomenon, the AA6061/AA5754 composite was formed using a severe plastic deformation technique, Cross Accumulative Roll Bonding (CARB), at an elevated temperature (350 °C) to ensure good bonding between layers. This technique was efficient to maintain a small grain size, even under the process temperature conditions, and consequently, preserve good mechanical properties. The composite had better mechanical properties than the initial aluminium alloys. Microstructure and texture remained stable after two cycles and yield stress tended towards an equal value in the rolling and the transverse directions. After two cycles, the main component was the {001}〈110〉 rotated Cube, which was maintained for up to 10 cycles. Diffusion was more effective as the strain increased. Finally, a tungsten inert gas (TIG) welding process was performed on the composite and confirmed resistance to hot cracking.

Dry Sliding Wear Charactristics of Aluminum 6061-T6, Magnesium AZ31 and Rock Dust Composite

Science.gov (United States)

Balachandar, R.; Balasundaram, R.; Rajkumar, G.

2018-02-01

In recent years, the use of aluminum composite is gaining popularity in a wide range of applications like automobiles, aerospace and constructions (both interior & exterior) panels etc., due to its high strength, low density characteristics. Various reinforcing materials are used with aluminum 6061-T6 in order to have better mechanical properties. The addition of 0.3% of magnesium AZ31 will increase the ultimate tensile strength by 25 %. The reinforcement of rock dust will decrease the density. Hence, in order to have an advantages of magnesium AZ31 and rock dust, in this work, these two constitutes are varied from 1% to 2% on the base material of Al6061-T6 in stir casting. To evaluate the wear characteristics, Pin on disc is used in these composites. The input parameters are speed, time & load. The output response is wear. To minimize the number of experiments, L9 orthogonal array is used. The test results showed that a composite of 97% of Al (6061-T6), 1% Mg (AZ31) & 2 % of rock dust produced less wear. To find the best value of operating parameter for each sample, ANN-GA is used.

Microstructural development from interdiffusion and reaction between U−Mo and AA6061 alloys annealed at 600° and 550 °C

Energy Technology Data Exchange (ETDEWEB)

Perez, E., E-mail: Emmanuel.Perez@inl.gov [Nuclear Fuels and Materials Division, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-6188 (United States); Keiser, D.D., E-mail: dennis.keiser@inl.gov [Nuclear Fuels and Materials Division, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-6188 (United States); Sohn, Y.H., E-mail: yongho.sohn@ucf.edu [Department of Materials Science and Engineering, University of Central Florida, 4000 Central Florida Blvd., Orlando, FL 32816 (United States)

2016-08-15

The U.S. Material Management and Minimization Reactor Conversion Program is developing low enrichment fuel systems encased in Al-alloy for use in research and test reactors. Monolithic fuel plates have local regions where the U−Mo fuel plate may come into contact with the Al-alloy 6061 (AA6061) cladding. This results in the development of interdiffusion zones with complex microstructures with multiple phases. In this study, the microstructural development of diffusion couples, U−7 wt%Mo, U−10 wt%Mo, and U−12 wt%Mo vs. AA6061, annealed at 600 °C for 24 h and at 550 °C for 1, 5, and 20 h, were analyzed by scanning electron microscopy with x-ray energy dispersive spectroscopy. The microstructural development and kinetics were compared to diffusion couples U−Mo vs. high purity Al and binary Al−Si alloys. The diffusion couples developed complex interaction regions where phase development was influenced by the alloying additions of the AA6061. - Highlights: • Diffusion couples of U−7Mo, U−10Mo, and U−12Mo vs. AA6061 were analyzed by SEM with XEDS. • The couples were annealed at 600 °C for 24 h and at 550 °C for 1, 5 and 20 h. • The interaction regions were more complex than those in diffusion couples of U−Mo vs. high purity Al and Al−Si alloys. • Analysis showed that the alloying additions of the AA6061 were present in the interaction regions. • Phase development was significantly influenced by the alloying additions of the AA6061.

Influence of extrusion parameters on sic distribution and properties of AA6061/SiC composites produced by kobo method

Energy Technology Data Exchange (ETDEWEB)

WoĨniak, Jarosáaw; Kostecki, Marek; Broniszewski, Kamil; Olszyna, Andrzej [Faculty of Material Science and Engineering, Warsaw University of Technology, Warsaw (Poland); Bochniak, Wáodzimierz [Faculty of Non-Ferrous Metals, AGH University of Science and Technology, Cracow (Poland)

2013-07-01

The influence of extrusion parameters on reinforcements distribution and properties of AA6061+x% vol. SiC p (x=0; 2.5; 5; 7.5; 10) composites was discussed in this paper The averages size of AA6061 and SiC particles were 10.6 μ m and 0.42 μ m, respectively. The composites were consolidated via powder metallurgy processing (without the sintering) and extruded by KoBo method. The microstructure was examined on each steps of production. High values of density for all produced composites were achieved. Additionally, hardness and Young’s modulus were investigated. The best reinforcement distribution and mechanical properties were obtained for composites extruded with the highest extrusion ratio. Key words: aluminum alloy, extrusion, aged hardening, metal matrix composites, microstructure.

The effects of various reinforcements on dry sliding wear behaviour of AA 6061 nanocomposites

International Nuclear Information System (INIS)

Jeyasimman, D.; Narayanasamy, R.; Ponalagusamy, R.; Anandakrishnan, V.; Kamaraj, M.

2014-01-01

Highlights: • Wear and friction coefficient of nanocomposites were investigated. • The worn surface morphologies of nanocomposites were analysed. • The wear rate was increased with increasing load and sliding velocity. • The friction coefficient was decreased with increasing load and sliding velocity. - Abstract: The present work aims to investigate the dry sliding wear behaviour of AA 6061 nanocomposites reinforced with various nanolevel reinforcements, such as titanium carbide (TiC), gamma phase alumina (γ-Al 2 O 3 ) and hybrid (TiC + Al 2 O 3 ) nanoparticles with two weight percentages (wt.%) prepared by 30 h of mechanical alloying (MA). The tests were performed using a pin-on-disk wear tester by sliding these pin specimens at sliding speeds of 0.6, 0.9 and 1.2 m/s against an oil-hardened non-shrinking (OHNS) steel disk at room temperature. Wear tests were conducted for normal loads of 5, 7 and 10 N at different sliding speeds at room temperature. The variations of the friction coefficient and the wear rate with the sliding distances (500 m, 1000 m and 1600 m) for different normal loads and sliding velocities were plotted and investigated. To observe the wear characteristics and to investigate the wear mechanism, the morphologies of the worn surfaces were analysed using a scanning electron microscope (SEM). The formation of an oxide layer on the worn surface was examined by energy dispersive spectroscopy (EDS). The wear rate was found to increase with the load and sliding velocity for all prepared nanocomposites. Hybrid (TiC + Al 2 O 3 ) reinforced AA 6061 nanocomposites had lower wear rates and friction coefficients compared with TiC and Al 2 O 3 reinforced AA 6061 nanocomposites

Influence of in situ formed ZrB2 particles on microstructure and mechanical properties of AA6061 metal matrix composites

International Nuclear Information System (INIS)

Dinaharan, I.; Murugan, N.; Parameswaran, Siva

2011-01-01

Highlights: → In situ fabrication of aluminium metal matrix composite reinforced ZrB 2 particles. → Colour metallography of composites. → Improvement of matrix properties by ZrB 2 particles. → Sliding wear behaviour of in situ composites. - Abstract: Particulate reinforced metal matrix composites (PMMCs) have gained considerable amount of research emphasis and attention in the present era. Research is being carried out across the globe to produce new combination of PMMCs. PMMCs are prepared by adding a variety of ceramic particles with monolithic alloys using several techniques. An attempt has been made to produce aluminium metal matrix composites reinforced with zirconium boride (ZrB 2 ) particles by the in situ reaction of K 2 ZrF 6 and KBF 4 salts with molten aluminium. The influence of in situ formed ZrB 2 particles on the microstructure and mechanical properties of AA6061 alloy was studied in this work. The in situ formed ZrB 2 particles significantly refined the microstructure and enhanced the mechanical properties of AA6061 alloy. The weight percentage of ZrB 2 was varied from 0 to 10 in steps of 2.5. Improvement of hardness, ultimate tensile strength and wear resistance of AA6061 alloy was observed with the increase in ZrB 2 content.

Electrochemical corrosion characteristics of aluminium alloy 6061 T6 in demineralized water containing 0.1 % chloride ion

International Nuclear Information System (INIS)

Zaifol Samsu; Muhammad Daud; Siti Radiah Mohd Kamarudin; Mohd Saari Ripin; Rusni Rejab; Mohd Shariff Sattar

2012-01-01

Direct current electrochemical method is one of the techniques has been used to study the corrosion behaviour of metal/alloy in its environment. This paper attempts to investigate the corrosion behaviour of Al 6061 T6 immersed in Reactor TRIGA Mark II pool water containing about 0.1% NaCl content. The result shown that the corrosion rate value of the aluminium 6061 T6 increased with the presence of 0.1 % Ion Chloride content in the demineralized water reactor pool as compared to normal demineralized water. This is due to aggressiveness of chloride ion attack to metal surface. Beside corrosion rate analysis, the further tests such as corrosion behaviour diagram, cyclic polarization have been carried and the results have been reported. (author)

Effect of annealing, thickness ratio and bend angle on springback of AA6061-T6 with non-uniform thickness section

Directory of Open Access Journals (Sweden)

Adnan M.F.

2017-01-01

Full Text Available Non-uniform thickness section section is considered one of the most effective approaches to reduce automotive part weight. Reduction in term of mass and size result in less fuel consumption and greenhouse gases. Thickness is the most significant parameter to formability, therefore forming a section with non-uniform thickness becomes a great challenge. Improper process and incorrect decision may lead to severe defect and one of the main concerns is the springback. This study will focus on springback behaviour of non-uniform thickness AA6061 strip with complex profile using Taguchi Method. Profile projector (PC 3000 is used to measure the spring back and two-line technique is applied to measure angles (after loading between two lines. Three parameters (i.e. annealing temperature, thickness ratio and bend angle are studied, and results determine that the most significant parameter is bend angle, followed by thickness ratio, and then by the annealing temperature of the specimen during bending process.

Application of full factorial design to study the tribological properties of AA6061-B4C and AA6061-B4C-MoS2 composites

Directory of Open Access Journals (Sweden)

Monikandan V. V.

2018-03-01

Full Text Available This study statistically analyzes the tribological properties of AA6061-10 wt. % B4C mono composite and AA6061-10 wt.% B4C-7.5 wt. % MoS2 hybrid composite. The tribological behavior of the composites was studied at atmospheric conditions using a pin-on-disk tribo-tester. The tribological experiments were conducted as per the full factorial design (FFD experimental scheme. The ANOVA analysis of the wear rate revealed that the three factors, A (MoS2 particles addition, B (applied load, and D (sliding distance presented the physical and statistical significance on the wear rate. The ANOVA analysis of the friction coefficient revealed that the factors B (applied load and C (sliding speed and interaction AB (interaction of MoS2 particles addition and applied load presented the physical and statistical significance on the friction coefficient. It is observed from the main effects plots of the wear rate and friction coefficient that the increase in the levels of factors B (applied load and D (sliding distance increased the wear rate and friction coefficient. However, the wear rate and friction coefficient decreased with the increase in the level of factor A (MoS2 particles addition.

Predicting tensile strength of friction stir welded AA6061 aluminium alloy joints by a mathematical model

International Nuclear Information System (INIS)

Elangovan, K.; Balasubramanian, V.; Babu, S.

2009-01-01

AA6061 aluminium alloy (Al-Mg-Si alloy) has gathered wide acceptance in the fabrication of light weight structures requiring a high strength-to weight ratio and good corrosion resistance. Compared to the fusion welding processes that are routinely used for joining structural aluminium alloys, friction stir welding (FSW) process is an emerging solid state joining process in which the material that is being welded does not melt and recast. This process uses a non-consumable tool to generate frictional heat in the abutting surfaces. The welding parameters such as tool rotational speed, welding speed, axial force etc., and tool pin profile play a major role in deciding the joint strength. An attempt has been made to develop a mathematical model to predict tensile strength of the friction stir welded AA6061 aluminium alloy by incorporating FSW process parameters. Four factors, five levels central composite design has been used to minimize number of experimental conditions. Response surface method (RSM) has been used to develop the model. Statistical tools such as analysis of variance (ANOVA), student's t-test, correlation co-efficient etc. have been used to validate the developed model. The developed mathematical model can be effectively used to predict the tensile strength of FSW joints at 95% confidence level

Aging Behaviour of 6061 Al-15 vol% SiC Composite in T4 and T6 Treatments

OpenAIRE

Melby Chacko; Jagannath Nayak

2014-01-01

The aging behaviour of 6061 Al-15 vol% SiC composite was investigated using Rockwell B hardness measurement. The composite was solutionized at 350°C and quenched in water. The composite was aged at room temperature (T4 treatment) and also at 140°C, 160°C, 180°C and 200°C (T6 treatment). The natural and artificial aging behaviour of composite was studied using aging curves determined at different temperatures. The aging period for peak aging for different temperatures was identified. The time ...

Arco del milenio

Directory of Open Access Journals (Sweden)

Adell, Josep Mª

2005-02-01

the most significant stages in the erection of the Millennium Arch outside the Palacio de Congresos, venue for the 12th IBMAC.
These pictures are divided into six chapters: Background, Components, Springline, Piers, Arch, Centring Erection and Removal, and Trimming.

A lo largo de la historia, el Arco de fábrica ha sido el componente constructivo más característico de la Arquitectura y la Ingeniería desde que después de sus inicios etruscos en la época romana fuera desarrollado adelantándose con ello a la cultura helénica.
El Arco, desde entonces, viene empleándose como una solución constructiva eficiente para cubrir espacios con materiales que no soportan tracciones. La originalidad técnica del Arco lo ha llevado a imponerse como símbolo de las hazañas bélicas como era el Arco de Triunfo.
En el cambio de siglo y milenio en el que nos encontramos, un salto técnico fundamental se desvela en este Congreso, el Sistema de Albañilería Integral, que abre la posibilidad de ampliar el campo de aplicación de la albañilería con la incorporación del acero, a través de las perforaciones de las piezas, lográndose por fin armar en las tres direcciones del espacio cualquier muro de fábrica que se desee.
El Arco del Milenio conmemoró el 12th IBMAC de Madrid, mostrando en él los avances técnicos que el Sistema de Albañilería Integral permite, al tratarse de un arco inclinado en el espacio y, por tanto, el primer arco de fábrica construido fuera de la vertical, mediante fábrica de Ladriflor aparejada a tizón, reforzada con barras y cercos.
El Arco del Milenio, diseñado por J.M. Adell (Presidente del 12th IBMAC, parte de un cilindro de 14 m de diámetro, inclinado 30º sobre el terreno, y construido con fábrica de ladrillo de un pie de grueso, alternando una hilada de color amarillo de cada seis en rojo. El hueco deja un paso libre de 10 m de lado y 5,5 m de altura. La fábrica está armada regularmente por tendeles con cerchas cada

Dynamic Response and Microstructure Evolution of AA2219-T4 and AA2219-T6 Aluminum Alloys

Science.gov (United States)

Olasumboye, A.; Owolabi, G.; Odeshi, A.; Zeytinci, A.; Yilmaz, N.

2018-02-01

In this study, the dynamic deformation behavior of AA2219 aluminum alloy was investigated in two different temper conditions: T4 and T6, with a view to determining the effect of heat treatment on the microstructure and flow behavior of the material under high strain rates. Split Hopkinson pressure bar experiment was used in determining the dynamic response of the alloy while a digital image correlation system was employed in visualizing and tracking the surface deformation of the specimens. Optical microscopy and scanning electron microscopy were used to assess the microstructure of the material after following standard metallographic specimen preparation techniques. The results obtained showed heterogeneous deformation of the alloy in the two temper conditions. It was observed that the dynamic mechanical behavior of each sample preparation was dependent on its strength properties due to aging type, which in turn controls the metamorphosis of the strengthening precipitates and the initial microstructure. At the maximum strain rate of 3500 s-1, transformed bands leading to crack nucleation was observed in the AA2219-T4 aluminum alloy while AA2219-T6 had fractured at the same strain rate. The modes of crack formation and growth in the two alloys were found to be similar: nucleation, growth and coalescence of voids. However, shear band bifurcation phenomenon was observed only in the AA2219-T6 alloy.

Corrosion Behavior of Arc Weld and Friction Stir Weld in Al 6061-T6 Alloys

International Nuclear Information System (INIS)

Yoon, Byoung Hyun; Kim, Heung Ju; Chang, Woong Seong; Kweon, Young Gak

2006-01-01

For the evaluation of corrosion resistance of Al 6061-T6 Alloy, Tafel method and immersion test was performed with Friction Stir Weld(FSW) and Gas Metal Arc Weld(GMAW). The Tafel and immersion test results indicated that GMA weld was severely attacked compared with those of friction stir weld. It may be mainly due to the galvanic corrosion mechanism act on the GMA weld

Metallographic characterisation of Al6061-T6 aluminium plates subjected to ballistic impact

International Nuclear Information System (INIS)

Manes, A.; Pagani, M.; Saponara, M.; Mombelli, D.; Mapelli, C.; Giglio, M.

2014-01-01

Al6061-T6 aluminium single layer plates, of different thickness, impacted by two different 7.62 mm Armour Piercing projectiles are studied from a metallographic point of view. The material behaviour after ballistic impact is investigated by optical and scanning electron microscopy as well as by micro-hardness tests. The study allows one to highlight the physical phenomena that happen during the impact: the formation of adiabatic shear bands (ASB), the evolution of softening and hardening phenomena, the creation of petalling, plugging and the formation of a melted film between the target and the penetrator as well as the localised failure mechanism. The thermo-mechanical effects on the target and the penetrator material have been examined in order to investigate in the physical phenomena ruling the ballistic damage; the differences between the two types of impactors are also highlighted. Among interesting findings, it has been noticed that a complete penetration is less detrimental and tungsten core projectile seems more damaging for the structural integrity of Al6061-T6 plates. A complete penetration allows the material to better dissipate the plastic deformation energy induced by bullet whereas the arrest increases localised material softening effect resulting in the formation of ASB. Although the creation of numerical models is not the aim of the present paper, the findings could be useful for the building of a modelling approach capable of replicating all the involved phenomena in details

Metallographic characterisation of Al6061-T6 aluminium plates subjected to ballistic impact

Energy Technology Data Exchange (ETDEWEB)

Manes, A., E-mail: andrea.manes@polimi.it; Pagani, M.; Saponara, M.; Mombelli, D.; Mapelli, C.; Giglio, M.

2014-07-01

Al6061-T6 aluminium single layer plates, of different thickness, impacted by two different 7.62 mm Armour Piercing projectiles are studied from a metallographic point of view. The material behaviour after ballistic impact is investigated by optical and scanning electron microscopy as well as by micro-hardness tests. The study allows one to highlight the physical phenomena that happen during the impact: the formation of adiabatic shear bands (ASB), the evolution of softening and hardening phenomena, the creation of petalling, plugging and the formation of a melted film between the target and the penetrator as well as the localised failure mechanism. The thermo-mechanical effects on the target and the penetrator material have been examined in order to investigate in the physical phenomena ruling the ballistic damage; the differences between the two types of impactors are also highlighted. Among interesting findings, it has been noticed that a complete penetration is less detrimental and tungsten core projectile seems more damaging for the structural integrity of Al6061-T6 plates. A complete penetration allows the material to better dissipate the plastic deformation energy induced by bullet whereas the arrest increases localised material softening effect resulting in the formation of ASB. Although the creation of numerical models is not the aim of the present paper, the findings could be useful for the building of a modelling approach capable of replicating all the involved phenomena in details.

Coarsening of AA6013-T6 Precipitates During Sheet Warm Forming Applications

Science.gov (United States)

Di Ciano, M.; DiCecco, S.; Esmaeili, S.; Wells, M. A.; Worswick, M. J.

2018-03-01

The use of warm forming for AA6xxx-T6 sheet is of interest to improve its formability; however, the effect warm forming may have on the coarsening of precipitates and the mechanical strength of these sheets has not been well studied. In this research, the coarsening behavior of AA6013-T6 precipitates has been explored, in the temperature range of 200-300 °C, and time of 30 s up to 50 h. Additionally, the effect of warm deformation on coarsening behavior was explored using: (1) simulated warm forming tests in a Gleeble thermo-mechanical simulator and (2) bi-axial warm deformation tests. Using a strong obstacle model to describe the yield strength (YS) evolution of the AA6013-T6 material, and a Lifshitz, Slyozov, and Wagner (LSW) particle coarsening law to describe the change in precipitate size with time, the coarsening kinetics were modeled for this alloy. The coarsening kinetics in the range of 220-300 °C followed a trend similar to that previously found for AA6111 for the 180-220 °C range. There was strong evidence that coarsening kinetics were not altered due to warm deformation above 220 °C. For warm forming between 200 and 220 °C, the YS of the AA6013-T6 material increased slightly, which could be attributed to strain hardening during warm deformation. Finally, a non-isothermal coarsening model was used to assess the potential reduction in the YS of AA6013-T6 for practical processing conditions related to auto-body manufacturing. The model calculations showed that 90% of the original AA6013-T6 YS could be maintained, for warm forming temperatures up to 280 °C, if the heating schedule used to get the part to the warm forming temperature was limited to 1 min.

Effect of gaussian beam on microstructural and mechanical properties of dissimilarlaser welding ofAA5083 and AA6061 alloys

Science.gov (United States)

Srinivas, B.; Cheepu, Muralimohan; Sivaprasad, K.; Muthupandi, V.

2018-03-01

The present study focuses on a sheet thickness of 4 mm using different laser power and welding rate by the laser beam welding (LBW) at a beam size180 μm. The observations on the weldments are showing that thermal conductivity of the materials plays a major role on microstructural changes. The as-welded mechanical properties were studied by correlation with its microstructures. Due to the steeper temperature gradient during the laser beam welding AA6061 was showing the greater variation compares with AA5083 side in the micro hardness studies.Also, the tensile strength of 241 MPa has been reported as highest with the welds made of laser powerat 3.5 kW and welding rate at 3.5 mmin-1.

Rare earth conversion coatings grown on AA6061 aluminum alloys. Corrosion studies

Energy Technology Data Exchange (ETDEWEB)

Brachetti S, S. B. [Instituto Tecnologico de Ciudad Madero, Av. 1o. de Mayo y Sor Juana I. de la Cruz, Col. Los Mangos, 89440 Ciudad Madero, Tanaulipas (Mexico); Dominguez C, M. A.; Torres H, A. M.; Onofre B, E. [IPN, Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada - Altamira, Carretera Tampico-Puerto Industrial Altamira Km. 14.5, 89600 Altamira, Tamaulipas (Mexico); De la Cruz H, W., E-mail: mdominguezc@ipn.mx [UNAM, Centro de Nanociencias y Nanotecnologia, Apdo. Postal 2681, 22800 Ensenada, Baja California (Mexico)

2014-07-01

The present work is aimed to investigate the corrosion resistance of rare earth protective coatings deposited by spontaneous deposition on AA6061 aluminum alloy substrates. Coatings were deposited from water-based Ce(NO{sub 3}){sub 3} and La(NO{sub 3}){sub 3} solutions by varing parameters such as rare earth solution concentration, bath temperature and immersion time. The values of the Tafel slopes indicate that the cathodic process is favored by concentration polarization rather than activation polarization. Chemical and morphological characterizations of the surface before and after electrochemical evaluations were performed by X-ray photoelectron spectroscopy and scanning electron microscopy. (Author)

Rare earth conversion coatings grown on AA6061 aluminum alloys. Corrosion studies

International Nuclear Information System (INIS)

Brachetti S, S. B.; Dominguez C, M. A.; Torres H, A. M.; Onofre B, E.; De la Cruz H, W.

2014-01-01

The present work is aimed to investigate the corrosion resistance of rare earth protective coatings deposited by spontaneous deposition on AA6061 aluminum alloy substrates. Coatings were deposited from water-based Ce(NO 3 ) 3 and La(NO 3 ) 3 solutions by varing parameters such as rare earth solution concentration, bath temperature and immersion time. The values of the Tafel slopes indicate that the cathodic process is favored by concentration polarization rather than activation polarization. Chemical and morphological characterizations of the surface before and after electrochemical evaluations were performed by X-ray photoelectron spectroscopy and scanning electron microscopy. (Author)

T6 and T78 tempers of AA6065 alloy: a quantitative TEM study

Energy Technology Data Exchange (ETDEWEB)

Tanaka, M.; Warner, T. [Compagnie de Produits Chimiques et Electrometallurgiques Pechiney, Centre de Recherches de Voreppe, 38 (France)

2000-07-01

Quantitative transmission electron microscopy is used to characterize the microstructure of an industrial Al-Mg-Si-Cu alloy (AA6056) in a state (T78 temper) desensitized to intergranular corrosion in comparison with the peak aged state (T6 temper). Analysis of dark-field images and of zero-loss filtered selected-area-diffraction patterns, along with EDX spectroscopy, indicates an advanced precipitation of the quaternary phase containing Si and Cu in the T78-tempered alloy compared to the T6 one. This supports the current theory of the desensitization of AA6056 alloy. However, the application of EDX analysis to provide direct evidence of the chemical composition variation in the solid solution across the grain boundary appears less satisfactory. (orig.)

Reconstrução tridimensional de arcos magnéticos por tomografia

Science.gov (United States)

Simões, P. J. A.; Costa, J. E. R.

2003-08-01

Uma explosão solar é uma variação súbita do brilho que ocorre nas regiões ativas da atmosfera solar. Estas regiões são constituídas por um plasma magnetizado com intensa indução magnética e em cenários bem complexos como visto recentemente através de experimentos embarcados em satélites operando instrumentos em raios X moles e ultra-violeta distante. A energia magnética, que pode ser armazenada por um período de horas até dias em configurações magnéticas estressadas, é subitamente lançada na atmosfera solar e transferida para partículas como elétrons, prótons e núcleos pesados, que são acelerados e/ou aquecidos, produzindo radiação eletromagnética. A proposta final deste projeto é determinar as características espaciais de alta resolução da emissão e polarização girossincrotrônica de explosões solares em ambientes complexos de campos magnéticos. Os recentes resultados da emissão difusa em EUV apresentado pelos satélites TRACE e SOHO dos arcos magnéticos conectando as diferentes polaridades magnéticas sobre as regiões ativas possibilitam novas abordagens sobre o papel do campo magnético na emissão em rádio. Nesta etapa apresentamos os resultados da reconstrução da geometria tridimensional das linhas de força destes arcos utilizando técnicas tomográficas, a partir de imagens de alta resolução espacial obtidas pelo instrumento EIT (Extreme ultraviolet Imaging Telescope), além da modelagem das induções magnéticas por um campo dipolar e as densidades de partículas aceleradas. Utilizamos para a reconstrução geométrica, imagens tomadas em vários ângulos dos arcos devido à rotacão solar. Com estes resultados, daremos continuidade ao projeto, com os cálculos da transferência radiativa nos modos ordinário e extraordinário de propagação da radiação girossincrotrônica de explosões solares.

Mechanical and tribological characterization of the Al 6061-T651 and the Al 6061-T651 with chromium phosphate coating

International Nuclear Information System (INIS)

Pena B, A.

2002-01-01

This work consist of two parts. The first one, related with theoretic concepts of tribology, condensed the friction and wear phenomena, considering aspects to bring something relevant into a process. In this conditions, to add lubricant cause a significant performance change during the phenomena mentioned above. The second part of this work, described experimental aspects as how we do a chromium phosphate coating in immersion cell, using 6061-T651 aluminum as substrate. In the process, we consider values of parameters in optimum conditions, obtained by commercial aluminum during previous investigations made in National Institute of Nuclear Research. Here, we characterized chromium phosphate coating and, 6061-T651 aluminum alloy using Sem and X-Ray Diffraction techniques. The measurement of some chromium phosphate characteristic as thickness, weight for area unit, density, roughness, microhardness, adhesion and corrosion resistant were made with appropriately equipment and, in accordance with international standards procedures. In tribological aspect, we determinate adhesive wear resistance and abrasive wear resistance for 6061-T651 aluminum alloy and chromium phosphate coating. Adhesive wear resistance was made for dry condition while abrasive wear resistance were made for dry and wet conditions. Tests are to guide by ASTM G99, G65 and G105 designations respectively. (Author)

The effects of hard particles on the surface quality when micro-cutting aluminum 6061 T6

International Nuclear Information System (INIS)

Ding, X; Lee, L C; Butler, D L; Cheng, C K

2009-01-01

Studies of micro-cutting have so far largely been carried out on single-phase materials. Due to the size effect, the workpiece material microstructure can have a significant influence on the cutting force, chip formation and surface quality. Previous investigations have shown that hard particles in materials such as aluminum alloy can play a significant role in the generation of defects such as cracks and voids on the work surface. This paper will examine the extent of the problem during the micro-cutting of Al6061 T6 and propose how it can be mitigated

Study of corrosion processes on Al-AA 6061 crevices immersed in high purity water and sodium citrate solution

International Nuclear Information System (INIS)

Rodriguez, Sebastian A.; Haddad, Roberto; Lanzani, Liliana A.

2004-01-01

An experimental approach has been developed to study the corrosion behavior of artificial crevices manufactured with high purity aluminum and AA 6061 alloy, immersed in dematerialised water and sodium citrate solution (96,5 μS/cm). Alkaline attack was found on the surrounding of iron rich particles in the external zone of the crevice, as a result of localized oxygen reduction reaction on these sites. This attack was not observed in the zone inside the crevice. Study of the phase Mg 2 Si by EDS allowed establishing that there is not preferential dissolution inside the crevice. The formation of a stable and non-soluble complex between Al and citrate anion inhibited the production of Al(OH) 3 precipitate, which was observed on the surface of specimens immersed in pure water. Investigations of the aluminum oxide evolution on AA 6061 surfaces in water showed that it was composed by two layers: an internal one made of Bohemite and an external one in direct contact with the water, with a Bayerite structure. The surface analysis was accomplished using XR, OM and SEM techniques. (author) [es

Corrosion Properties of Dissimilar Friction Stir Welded 6061 Aluminum and HT590 Steel

Science.gov (United States)

Seo, Bosung; Song, Kuk Hyun; Park, Kwangsuk

2018-05-01

Corrosion properties of dissimilar friction stir welded 6061 aluminum and HT590 steel were investigated to understand effects of galvanic corrosion. As cathode when coupled, HT590 was cathodically protected. However, the passivation of AA6061 made the aluminum alloy cathode temporarily, which leaded to corrosion of HT590. From the EIS analysis showing Warburg diffusion plot in Nyquist plots, it can be inferred that the stable passivation layer was formed on AA6061. However, the weld as well as HT590 did not show Warburg diffusion plot in Nyquist plots, suggesting that there was no barrier for corrosion or even if it exists, the barrier had no function for preventing and/or retarding charge transport through the passivation layer. The open circuit potential measurements showed that the potential of the weld was similar to that of HT590, which lied in the pitting region for AA6061, making the aluminum alloy part of the weld keep corrosion state. That resulted in the cracked oxide film on AA6061 of the weld, which could not play a role of corrosion barrier.

Dependence on Temperature, pH, and Cl"− in the Uniform Corrosion of Aluminum Alloys 2024-T3, 6061-T6, and 7075-T6

International Nuclear Information System (INIS)

Huang, I-Wen; Hurley, Belinda L.; Yang, Fan; Buchheit, Rudolph G.

2016-01-01

With regards to localized corrosion, the role of uniform corrosion of aluminum alloys has not always been accounted for in the past. The impact of uniform corrosion on aluminum alloys 2024-T3, 6061-T6, and 7075-T6 is studied here to provide quantitative evidence of its importance. Preliminary weight loss experiments combined with optical profilometry (OP) indicate that corrosion attributed to uniform corrosion is very significant when compared to localized corrosion. A series of free immersion tests were conducted to understand the influence of environmental variables including temperature (20, 40, 60, 80 °C), initial pH without buffering (3, 5, 8, 10) and chloride concentration (0.01, 0.1, 1 M) for 1, 7, and 30 days. With time, uniform corrosion results exhibited a strong dependence on temperature accompanied by variable pH- and temperature-dependent corrosion product formation. Electrochemical approaches including electrochemical impedance spectroscopy (EIS) and cathodic polarization were utilized to characterize the oxygen reduction reaction (ORR) and corrosion product formation as a function of temperature. Electron microscopy was conducted to assess the microstructure and morphology of corrosion products and provide supporting evidence for electrochemical findings.

Simulation of the repeated waterdrop impact onto the AL6061-T6

Energy Technology Data Exchange (ETDEWEB)

Cho, Ji Ryong [Inje University, Kimhae (Korea, Republic of)

2015-09-15

Waterdrop impact effects on mechanical and aerospace components have presented challenging problems for investigation. Sometimes it erodes the surface and leads to failure of the components. But it is known that controlled impact can enhance the fatigue life of the components. In this computational study, residual effects of repeated waterdrop impact onto the AL6061-T6 specimen are investigated. It is shown that above a critical impact speed (74 m/s), residual compressive stress zone is built up underneath the impact surface as a result of the plastic deformation of the specimen. The depth of pit due to the plastic deformation increases with the impact speed and the accumulated number of impact. At the impact speed of 500 m/s, after 4 impacts, the maximum residual compressive stress of 0.345 GPa is obtained at 0.067 mm underneath the surface, and the depth of the compressive stress zone is 0.2 mm.

Effect of laser shock processing on fatigue crack growth and fracture toughness of 6061-T6 aluminum alloy

International Nuclear Information System (INIS)

Rubio-Gonzalez, C.; Ocana, J.L.; Gomez-Rosas, G.; Molpeceres, C.; Paredes, M.; Banderas, A.; Porro, J.; Morales, M.

2004-01-01

Laser shock processing (LSP) or laser shock peening is a new technique for strengthening metals. This process induces a compressive residual stress field which increases fatigue crack initiation life and reduces fatigue crack growth rate. Specimens of 6061-T6 aluminum alloy are used in this investigation. A convergent lens is used to deliver 1.2 J, 8 ns laser pulses by a Q-switch Nd:YAG laser, operating at 10 Hz. The pulses are focused to a diameter of 1.5 mm onto a water-immersed type aluminum samples. Effect of pulse density in the residual stress field is evaluated. Residual stress distribution as a function of depth is assessed by the hole drilling method. It is observed that the higher the pulse density the larger the zone size with compressive residual stress. Densities of 900, 1350 and 2500 pulses/cm 2 with infrared (1064 nm) radiation are used. Pre-cracked compact tension specimens were subjected to LSP process and then tested under cyclic loading with R = 0.1. Fatigue crack growth rate is determined and the effect of LSP process parameters is evaluated. Fatigue crack growth rate is compared in specimens with and without LSP process. In addition fracture toughness is determined in specimens with and without LSP treatment. It is observed that LSP reduces fatigue crack growth and increases fracture toughness in the 6061-T6 aluminum alloy

Effect of the reinforced boron carbide particulate content of AA6061 alloy on formation of the passive film in seawater

International Nuclear Information System (INIS)

Katkar, V.A.; Gunasekaran, G.; Rao, A.G.; Koli, P.M.

2011-01-01

Highlights: → Presence of boron carbide increases the corrosion rate of A6061 alloy in seawater. → Increasing the B 4 C content decreases passive layer thickness. → Passive films formed on A6061 and its B 4 C composites are n-type semiconductors. - Abstract: The effect of boron carbide (B 4 C) reinforcement on the corrosion of AA6061 alloy was studied by investigating passive films formed in seawater. The higher passive current and its potential-dependence for these composites indicated formation of porous passive film. Electrochemical impedance spectroscopy (EIS) graph suggests that the alloy surface is partly or totally active. The formed passive film is n-type semiconductor junction in nature. The difference between corrosion potential (E corr ) and potential at zero charge (PZC) suggests that the chloride ions responsible for film breakdown exist within the passive film. A suitable mechanism is proposed for the passive film breakdown.

In-situ neutron diffraction measurements of temperature and stresses during friction stir welding of 6061-T6 aluminum alloy

International Nuclear Information System (INIS)

Woo, Wan Chuck; Feng, Zhili; Wang, Xun-Li; Brown, D.W.; Clausen, B.; An, Ke; Choo, Hahn; Hubbard, Camden R.; David, Stan A.

2007-01-01

The evolution of temperature and thermal stresses during friction stir welding of Al6061-T6 was investigated by means of in-situ, time-resolved neutron diffraction technique. A method is developed to deconvolute the temperature and stress from the lattice spacing changes measured by neutron diffraction. The deep penetration capability of neutrons made it possible for the first time to obtain the temperature and thermal stresses inside a friction stir weld

A nano-indentation study on the mechanical behaviour of the matrix material in an AA6061-Al2O3 MMC

NARCIS (Netherlands)

Mussert, K.M.; Vellinga, W.P.; Bakker, A.; Zwaag, van der S.

2002-01-01

The nano-indentation technique is a suitable technique to measure hardness and elastic moduli profiles of AA6061 reinforced with Al2O3 particles, since it allows measurements of mechanical properties on a micrometer range. To investigate possible local variations in mechanical behaviour of the

The role of silicon in the corrosion of AA6061 aluminium alloy laser weldments

Energy Technology Data Exchange (ETDEWEB)

Rahman, A.B.M. Mujibur; Kumar, Sunil [Ian Wark Research Institute, University of South Australia, Mawson Lakes Campus, Mawson Lakes, SA 5095 (Australia); Gerson, Andrea R. [Applied Centre for Structural and Synchrotron Studies, University of South Australia, Mawson Lakes Campus, Mawson Lakes, SA 5095 (Australia)], E-mail: Andrea.Gerson@unisa.edu.au

2010-06-15

The galvanic corrosion temporal increase observed on examination of the weld fusion zone (WFZ) of AA6061 laser weldments in 3.5 wt.% NaCl solution cannot be attributed to electron tunnelling as the surface oxide layer is too thick, or the presence of Cl{sup -} within the surface layer as this element was not found to be present. Aluminium alloy and WFZ galvanic and surface analyses indicate that the cathodic WFZ corrosion characteristics are due to increases in silicate concentrations in the surface oxide layer, leading to increased ionic and/or p-type semi-conductor conductivity, intermetallic concentrations and surface area.

The role of silicon in the corrosion of AA6061 aluminium alloy laser weldments

International Nuclear Information System (INIS)

Rahman, A.B.M. Mujibur; Kumar, Sunil; Gerson, Andrea R.

2010-01-01

The galvanic corrosion temporal increase observed on examination of the weld fusion zone (WFZ) of AA6061 laser weldments in 3.5 wt.% NaCl solution cannot be attributed to electron tunnelling as the surface oxide layer is too thick, or the presence of Cl - within the surface layer as this element was not found to be present. Aluminium alloy and WFZ galvanic and surface analyses indicate that the cathodic WFZ corrosion characteristics are due to increases in silicate concentrations in the surface oxide layer, leading to increased ionic and/or p-type semi-conductor conductivity, intermetallic concentrations and surface area.

The corrosion protection of 6061-T6 aluminum by a polyurethane-sealed anodized coat

Science.gov (United States)

Danford, M. D.

1990-01-01

The corrosion protection of 6061-T6 anodized aluminum afforded by a newly patented polyurethane seal was studied using the ac impedance technique. Values of the average corrosion rates over a 27-day exposure period in 3.5 percent NaCl solutions at pH 5.2 and pH 9.5 compared very favorably for Lockheed-prepared polyurethane-sealed and dichromate-sealed coats of the same thickness. Average corrosion rates for both specimens over the first 7 days of exposure compared well with those for a hard anodized, dichromate-sealed coat, but rose well above those for the hard anodized coat over the entire 27-day period. This is attributed both to the greater thickness of the hard anodized coat, and possibly to its inherently better corrosion protective capability.

The influence of a aging thermal treatment on the mechanical properties of 6061 T6 and 6063 T5 aluminums

International Nuclear Information System (INIS)

Bohorquez, A.C.; Sierra C, M; Lemus, J

2010-01-01

Because of its light weight and its good mechanical properties, aluminum alloys have been used traditionally in the production of structural airplane components and car parts. Aluminum alloys with magnesium-silicon (Al-Mg-Si), 6XXX series, respond acceptably to the aging thermal treatment; because the magnesium and silicon permit precipitation hardening, which significantly changes the mechanical properties of this alloy. Two aluminums were selected for this study: 6061 T6 and 6063 T5, which were thermally treated at 120 o C, 150 o C and 180 o C for 8, 12, 24, 48 and 72 hours with later quenching in water. An experimental design established the number of test specimens needed to analyze the phenomena. Later, tension tests were developed to verify the property changes undergone during the thermal treatment. The results are presented in performance graphs that show the influence of time and temperature on the mechanical properties of the chosen aluminums

Arco Vara laieneb Bulgaariasse

Index Scriptorium Estoniae

2006-01-01

Alates juunist tegutseb Bulgaarias Arco Vara Gruppi kuuluv maaklerfirma Arco Imoti EOOD, mis tegutseb rahvusvahelise kaubamärgi ARCO Real Estate all. Bulgaariasse on Eesti ettevõtetest oma tegevust laiendanud ka varahaldusfirma Delta Imoti Capital ja Kalev Real Estate Company kinnisvaraarendusega tegelev tütarettevõte Stude REC EOOD

Effect of the Preheating Temperature on Process Time in Friction Stir Welding of Al 6061-T6

DEFF Research Database (Denmark)

Jabbari, Masoud

2013-01-01

This paper presents the results obtained and the deductions made from an analytical modeling involving friction stir welding of Al 6061-T6. A new database was developed to simulate the contact temperature between the tool and the workpiece. A second-order equation is proposed for simulating...... the temperature in the contact boundary and the thermal history during the plunge phase. The effect of the preheating temperature on the process time was investigated with the proposed model. The results show that an increase of the preheating time leads to a decrease in the process time up to the plunge...

Effect of pin tool design on the material flow of dissimilar AA7075-AA6061 friction stir welds

Science.gov (United States)

Hasan, Mohammed M.; Ishak, M.; Rejab, M. R. M.

2017-10-01

Tool design is the most influential aspect in the friction stir welding (FSW) technology. Influence of pin tool geometry on material flow pattern are studied in this work during the FSW of dissimilar AA7075 and AA6061 aluminium alloys. Three truncated pin tool profiles (threaded, threaded with single flat, and unthreaded with single flat) were used to prepare the weldments. The workpieces were joined using a custom-made clamping system under 1100 rpm of spindle speed, 300 mm/min of traverse rate and 3° of tilt angle. The metallographic analysis showed that defect-free welds can be produced using the three pin tools with significant changes in the mixing stir zone structure. The results declared that the introducing of the flat on the cone of the probe deviates the pattern of the onion rings without changing the chemical composition of the created layers. This in turn improves the hardness distribution and tensile strength of the welded joint. It was also noted that both heat affected zone (HAZ) and thermal-mechanical affected zone (TMAZ) are similar in composition to their corresponding base materials (BM).

Reinforcement with alumina particles at the interface region of AA6101-T6 and AA1350 alloys during friction stir welding

Science.gov (United States)

Ashok Kumar, R.; Thansekhar, M. R.

2018-04-01

This paper deals the combinational effect of friction stir welding and friction stir processing on dissimilar AA6101-T6 and AA1350 aluminium alloys. For that, alumina particles are reinforced at interface region of AA6101-T6 and AA1350 aluminium alloys. Friction Stir Welding and Friction Stir Processing are done simultaneously for various sizes of groove. To analyze the welding quality and surface modifications, mechanical, wear and microstructural tests are carried out. Among these, smallest groove of 0.5 mm width and 1 mm depth reveals highest tensile and bending strengths and largest groove of 2 mm width and 3 mm depth gives maximum hardness and wear resistance. Taguchi technique shows that groove width is most influencing parameter. Developed second order models with interaction predict the responses with minimum error.

Comportamiento a fractura de la aleación 6061 reforzada con alúmina

Directory of Open Access Journals (Sweden)

Forn, A.

2004-04-01

Full Text Available The properties of the cast aluminium alloys 6061/(20%Al₂O_3p are studied. This material is obtained by Duralcan procedure after being submitted to an extrusion and forging process. These materials are submitted to T6 heat treatments in order to study their effect on mechanical properties. In this work the matrix characteristics are compared with the reinforced material in different production stages, using an optical and electronic microscopy, EDS, tensile, fatigue and ultramicrohardness tests. The mechanical properties indicate that the extruded reinforced material presents ultimate tensile strength values lower than the alloy 6061 under the same conditions, and this is related to the presence of spinel in the interface matrix-reinforcement. The fracture mechanisms are established by static and dynamic tensions in different cases, studying the possible interactions matrix-reinforcement and their repercussion in the mechanical behaviour of the alloy.

Se estudian las propiedades de las aleaciones de aluminio 6061/(20%Al₂O_3p obtenidas por colada y conformadas posteriormente por extrusión y forja. Estos materiales son sometidos a tratamientos térmicos de envejecimiento (T6 para estudiar su efecto en las propiedades mecánicas. En este trabajo se comparan las características de la matriz con las del material reforzado en las distintas etapas de producción utilizando técnicas de microscopía óptica y electrónica, EDS y ensayos de tracción, fatiga y ultramicroindentación. Los ensayos mecánicos indican que el material compuesto extruido presenta valores de resistencia mecánica más bajos que la aleación 6061 tratada en las mismas condiciones y ello se relaciona con la presencia de espinela en la interfase alúmina-matriz. Se establecen los mecanismos de fractura por tensiones estáticas y dinámicas en los distintos casos, estudiando las posibles interacciones matriz

Effects of heat treatments on the microstructure and mechanical properties of a 6061 aluminium alloy

International Nuclear Information System (INIS)

Maisonnette, D.; Suery, M.; Nelias, D.; Chaudet, P.; Epicier, T.

2011-01-01

Research highlights: → Description of the mechanical behavior of AA6061-T6 at RT after various thermal histories. → A fast-heating device has been designed to reproduce those thermal histories on tensile specimens. → The thermal loadings are representative of the temperature change observed in the HAZ during welding. → The variation of mechanical properties is the result of metallurgical evolution observed by TEM. → The yield stress at RT decreases with the maximum temperature reached during the thermal cycle. - Abstract: This paper describes the mechanical behavior of the 6061-T6 aluminium alloy at room temperature for various previous thermal histories representative of an electron beam welding. A fast-heating device has been designed to control and apply thermal loadings on tensile specimens. Tensile tests show that the yield stress at ambient temperature decreases if the maximum temperature reached increases or if the heating rate decreases. This variation of the mechanical properties is the result of microstructural changes which have been observed by Transmission Electron Microscopy (TEM).

Experimental and numerical characterization of anisotropic damage evolution of forged Al6061-T6 alloy

International Nuclear Information System (INIS)

Shen, Y.; Garnier, J.; Allais, L.; Crepin, J.; Ancelet, O.; Hiver, J.M.

2011-01-01

Aluminum alloy 6061-T6 (Al-Mg-Si) has been selected as the material of the vessel for the construction of Jules-Horowitz material testing reactor. Fracture mechanism of this alloy has been investigated using mechanical testing of smooth and notched tensile specimens loaded in different directions. A strong anisotropic fracture behavior has been observed. Microstructural studies using tomography and image analysis have shown a presence of anisotropic distributed coarse precipitates which is the key microstructural feature affecting the damage evolution. These observations were complemented by investigations on fractured tensile samples. A damage scenario of anisotropic growth and coalescence of voids is proposed to explain the fracture behavior associated with the distribution of precipitates. A GTN (Gurson-Tvergaard-Needleman) damage model is used to simulate this scenario and to predict damage evolution. (authors)

Effect of friction stir welding on microstructure, mechanical and wear properties of AA6061/ZrB2 in situ cast composites

International Nuclear Information System (INIS)

Dinaharan, I.; Murugan, N.

2012-01-01

Highlights: ► Application of FSW to join AA6061/ZrB 2 in situ composites. ► Homogenous distribution of ZrB 2 particles in the weld zone. ► Clusters in the parent composite are fragmented by the stirring action of the tool. ► Hardening of weld zone. ► FSW enhanced the wear resistance of the composite. - Abstract: Inadequate development of fabrication methods restricts the applications of new families of aluminum matrix composites (AMCs). Friction stir welding (FSW) is a potential candidate to join AMCs without any defects associated with conventional fusion welding processes. The primary objective of the present work is to apply FSW process to join AA6061/(0, 5 and 10 wt.%) ZrB 2 in situ cast composites and evaluate the joint properties. The composites were prepared by reacting inorganic salts K 2 ZrF 6 and KBF 4 with molten aluminum and joined using a FSW machine at a tool rotational speed of 1150 rpm, welding speed of 50 mm/min and axial force of 6 kN. The joints showed the presence of various zones such as weld zone (WZ), thermomechanically affected zone (TMAZ) and heat affected zone (HAZ). The weld zone was characterized with a homogenous distribution of ZrB 2 particles. The stirring action of the tool resulted in fragmentation of several clusters present in the parent composite. The weld zone exhibited higher hardness than that of the parent composite. The tensile strength of welded joints was comparable to that of parent composites. The wear resistance of the composites improved subsequent to FSW.

Development of the electron beam welding of the aluminium alloy 6061-T6 for the Jules Horowitz reactor

International Nuclear Information System (INIS)

Leblanc, Y.

2013-01-01

The aluminium alloy 6061-T6 has been selected for the construction of the Jules Horowitz's reactor vessel. This reactor vessel is pressurized and will be made through butt welding of ∼ 2 cm thick aluminium slabs. The electron beam welding process has been tested and qualified. It appears that this welding process allows: -) welding without pre-heating, -) vacuum welding, -) welding of 100% of the thickness in one passage, -) very low deforming welding process, -) very low density and very low volume of blow holes, -) weak ZAT (Thermal Affected Zones), and -) high reproducibility that permits automation. (A.C.)

Galvanic corrosion of laser weldments of AA6061 aluminium alloy

International Nuclear Information System (INIS)

Rahman, A.B.M. Mujibur; Kumar, S.; Gerson, A.R.

2007-01-01

Galvanic corrosion of laser welded AA6061 aluminium alloy, arising from the varying rest potentials of the various weldment regions, was examined. The weld fusion zone is found to be the most cathodic region of the weldment while the base material is the most anodic region. The rate of galvanic corrosion, controlled by the cathodic process at the weld fusion zone, increases with time until a steady state maximum is reached. On galvanic corrosion the corrosion potential of the weld fusion zone shifts in the positive direction and the free corrosion current increases. It is proposed that the cathodic process at the weld fusion zone causes a local increase in pH that in turn causes dissolution of the surface film resulting in the loss of Al to solution and the increase of intermetallic phases. The increase in galvanic corrosion may result from either the build up of the intermetallic phases in the surface layer and/or significant increase in surface area of the weld fusion zone due to the porous nature of the surface layer

Microstructure and Mechanical Properties of Dissimilar Friction Stir Welding between Ultrafine Grained 1050 and 6061-T6 Aluminum Alloys

Directory of Open Access Journals (Sweden)

Yufeng Sun

2016-10-01

Full Text Available The ultrafine grained (UFGed 1050 Al plates with a thickness of 2 mm, which were produced by the accumulative roll bonding technique after five cycles, were friction stir butt welded to 2 mm thick 6061-T6 Al alloy plates at a different revolutionary pitch that varied from 0.5 to 1.25 mm/rev. In the stir zone, the initial nano-sized lamellar structure of the UFGed 1050 Al alloy plate transformed into an equiaxial grain structure with a larger average grain size due to the dynamic recrystallization and subsequent grain growth. However, an equiaxial grain structure with a much smaller grain size was simultaneously formed in the 6061 Al alloy plates, together with coarsening of the precipitates. Tensile tests of the welds obtained at different welding speeds revealed that two kinds of fracture modes occurred for the specimens depending on their revolutionary pitches. The maximum tensile strength was about 110 MPa and the fractures were all located in the stir zone close to the 1050 Al side.

Effect of material strength on the relationship between the principal Hugoniot and quasi-isentrope of beryllium and 6061-T6 aluminum below 35 GPa

International Nuclear Information System (INIS)

Moss, W.C.

1985-01-01

Quasi-isentropic (QI) compression can be achieved by loading a specimen with a low strain rate, long rise time uniaxial strain wave. Recent experimental data show that the quasi-isentrope of 6061-T6 aluminum lies a few percent above the principal Hugoniot, that is, at a given specific volume, the QI stress exceeds the principal Hugoniot stress. It has been suggested that this effect is due to material strength. Using Hugoniot data, shock-reshock, and shock-unload data for beryllium and 6061-T6 aluminum, we have constructed the quasi-isentropes as functions of specific volume. Our results show that the QI stress exceeds the principal Hugoniot stress above a Hugoniot stress of 8.4 GPa in beryllium, and between Hugoniot stresses of 3.8 and 21.4 GPa in aluminum. The effect is due to strength and implies that the QI yield strength can be large. Our calculations show that the QI yield strength is 0.9 GPa in aluminum at a QI stress of 9 GPa, and 5.2 GPa in beryllium at a QI stress of 35 GPa

Residual stress distribution of a 6061-T6 aluminum alloy under shear deformation

International Nuclear Information System (INIS)

Reyes-Ruiz, C.; Figueroa, I.A.; Braham, C.; Cabrera, J.M.; Zanellato, O.; Baiz, S.; Gonzalez, G.

2016-01-01

There is a lack of information with regards to the friction effect in ECAPed aluminum alloys, even though it might substantially modify the deformation at the surface. In this work, the friction effect at the surface and the deformation heterogeneity in the ECAPed aluminum alloy 6061-T6 were characterized. X-Ray diffraction was used to determine residual stresses (RS) on the sample surface. The volumetric sections were characterized by Synchrotron diffraction at ESRF beamline ID15B (Grenoble, France). It was found that the microhardness mapping and residual stress results showed a good agreement with the finite element analysis for the first layer studied. Minor strain variation, Δd/d as a function of (hkl) planes, for the different analyzed sections was found. The study also showed that there was an incomplete symmetry in the residual stress near the surface, even at up to a depth of 400 µm. The regions with higher deformation were found to be at the top and bottom parts of the sample, while the central region showed stress variations of up to 50 MPa.

Residual stress distribution of a 6061-T6 aluminum alloy under shear deformation

Energy Technology Data Exchange (ETDEWEB)

Reyes-Ruiz, C.; Figueroa, I.A. [Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Circuito exterior S/N, Cd. Universitaria, A.P. 70-360, Coyoacán C.P. 04510 (Mexico); Braham, C. [Laboratoire Procédés et Ingénierie Mécanique et Matériaux, CNRS UMR 8006, ENSAM-CNAM, 151, Bd de l’Hôpital, 75013 Paris (France); Cabrera, J.M. [Departamento de Ciencia de los Materiales e Ingeniería Metalúrgica, ETSEIB-Universidad Politécnica de Cataluña, Av Diagonal 647, 08028 Barcelona (Spain); Fundació CTM Centre Tecnológic, Pl. de la Ciencia 2, 08243 Manresa (Spain); Zanellato, O.; Baiz, S. [Laboratoire Procédés et Ingénierie Mécanique et Matériaux, CNRS UMR 8006, ENSAM-CNAM, 151, Bd de l’Hôpital, 75013 Paris (France); Gonzalez, G., E-mail: joseggr@unam.mx [Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Circuito exterior S/N, Cd. Universitaria, A.P. 70-360, Coyoacán C.P. 04510 (Mexico)

2016-07-18

There is a lack of information with regards to the friction effect in ECAPed aluminum alloys, even though it might substantially modify the deformation at the surface. In this work, the friction effect at the surface and the deformation heterogeneity in the ECAPed aluminum alloy 6061-T6 were characterized. X-Ray diffraction was used to determine residual stresses (RS) on the sample surface. The volumetric sections were characterized by Synchrotron diffraction at ESRF beamline ID15B (Grenoble, France). It was found that the microhardness mapping and residual stress results showed a good agreement with the finite element analysis for the first layer studied. Minor strain variation, Δd/d as a function of (hkl) planes, for the different analyzed sections was found. The study also showed that there was an incomplete symmetry in the residual stress near the surface, even at up to a depth of 400 µm. The regions with higher deformation were found to be at the top and bottom parts of the sample, while the central region showed stress variations of up to 50 MPa.

Study of the corrosion of AA 6061 in spent fuel materials

International Nuclear Information System (INIS)

Rodriguez, Sebastian; Haddad, Roberto; Lanzani, Liliana A.

2003-01-01

Localized attack induced by dust or other particles deposited on alloy AA 6061 surface under water has been addressed as a matter of concern after completion of an IAEA Coordinated Research Program (CRP) on the corrosion of aluminum clad spent fuel during storage in water basins. This attack has been observed in all kinds of waters, although it is more pronounced in those of higher conductivity. In these cases a strong attack (similar to pitting corrosion) up to several hundred microns in depth and about a millimeter in length has been found beneath the aluminum hydroxide blister formed in those places where specks had seated on. As this problem could seriously affect the fission product containing capacity of stored spent fuel even in well maintained high quality water, it is important to learn about the involved mechanism of attack and find out about the influence of particle composition, in order to establish the convenience or disapproval of the use of materials and procedures in storage basins. With this objective, an experimental approach has been developed to study the mechanism of corrosion attack linked with the deposition of particles of different composition on aluminum surfaces; this include two kinds of iron flakes, concrete powder, and sand particles. Immersion tests of up to 40 days have been conducted in nuclear grade demineralized water and sodium citrate solutions of several conductivities. The position of sediments was marked and followed through the process and the final state of the aluminum surfaces was assessed by optical and electron microscopy and other microanalysis techniques. Other complementary activities carried on in relation with this work are: through characterization of intermetallic particles in AA 6061, and the study of the electrochemical behavior of precipitates in high purity water. Mg 2 Si particles perform very actively, dissolving even in high pure water at open circuit potential, leaving a small hole on the surface. Iron

Numerical simulation of aluminum alloy 6061 micro-mold fabrication for the production of polymeric microstructures by micro-hot-embossing

International Nuclear Information System (INIS)

Tran, N K; Chester, Shawn A; Lam, Y C; Anand, L; Yue, C Y

2012-01-01

Micro-molds play an important role in the manufacturing process of polymeric micro-devices, e.g. microfluidic devices, as they determine the product quality and the overall production cost. We report here the applicability of a large-deformation, high-temperature, isotropic elastic-viscoplasticity model for the prediction of micron-scale hot-embossing of AA6061. The material parameters in the constitutive model were determined by fitting the stress–strain curves from compression tests at various temperatures and strain rates. The constitutive theory was implemented in a finite element program, and the numerical simulation capability was validated by predicting the response of AA6061 in some representative macro-scale experiments; these experiments had not been used for the determination of the material parameters in the constitutive model. Additional micron-scale hot-embossing experiments on AA6061 were conducted, and by comparing the numerical simulation results to the corresponding physical experiments, we demonstrate that the deformation evolution of AA6061 during micro-hot-embossing is well predicted. The constitutive model and its numerical implementation open the possibility of optimizing the process of making micro-molds for microfluidic devices from AA6061. (paper)

Microstructural analysis of as-processed U-10 wt.%Mo monolithic fuel plate in AA6061 matrix with Zr diffusion barrier

Energy Technology Data Exchange (ETDEWEB)

Perez, E.; Yao, B. [Advanced Materials Processing and Analysis Center, Department of Mechanical, Materials and Aerospace Engineering, University of Central Florida, Orlando, FL 32816 (United States); Keiser, D.D. [Nuclear Fuels and Materials Division, Idaho National Laboratory, Scoville, ID 83415 (United States); Sohn, Y.H., E-mail: ysohn@mail.ucf.ed [Advanced Materials Processing and Analysis Center, Department of Mechanical, Materials and Aerospace Engineering, University of Central Florida, Orlando, FL 32816 (United States)

2010-07-01

For higher U-loading in low-enriched U-10 wt.%Mo fuels, monolithic fuel plate clad in AA6061 is being developed as a part of Reduced Enrichment for Research and Test Reactor (RERTR) program. This paper reports the first characterization results from a monolithic U-10 wt.%Mo fuel plate with a Zr diffusion barrier that was fabricated as part of a plate fabrication campaign for irradiation testing in the Advanced Test Reactor (ATR). Both scanning and transmission electron microscopy (SEM and TEM) were employed for analysis. At the interface between the Zr barrier and U-10 wt.%Mo, going from Zr to U(Mo), UZr{sub 2}, {gamma}-UZr, Zr solid-solution and Mo{sub 2}Zr phases were observed. The interface between AA6061 cladding and Zr barrier plate consisted of four layers, going from Al to Zr, (Al, Si){sub 2}Zr, (Al, Si)Zr{sub 3} (Al, Si){sub 3}Zr, and AlSi{sub 4}Zr{sub 5}. Irradiation behavior of these intermetallic phases is discussed based on their constituents. Characterization of as-fabricated phase constituents and microstructure would help understand the irradiation behavior of these fuel plates, interpret post-irradiation examination, and optimize the processing parameters of monolithic fuel system.

Microstructural analysis of as-processed U-10 wt.%Mo monolithic fuel plate in AA6061 matrix with Zr diffusion barrier

Science.gov (United States)

Perez, E.; Yao, B.; Keiser, D. D., Jr.; Sohn, Y. H.

2010-07-01

For higher U-loading in low-enriched U-10 wt.%Mo fuels, monolithic fuel plate clad in AA6061 is being developed as a part of Reduced Enrichment for Research and Test Reactor (RERTR) program. This paper reports the first characterization results from a monolithic U-10 wt.%Mo fuel plate with a Zr diffusion barrier that was fabricated as part of a plate fabrication campaign for irradiation testing in the Advanced Test Reactor (ATR). Both scanning and transmission electron microscopy (SEM and TEM) were employed for analysis. At the interface between the Zr barrier and U-10 wt.%Mo, going from Zr to U(Mo), UZr 2, γ-UZr, Zr solid-solution and Mo 2Zr phases were observed. The interface between AA6061 cladding and Zr barrier plate consisted of four layers, going from Al to Zr, (Al, Si) 2Zr, (Al, Si)Zr 3 (Al, Si) 3Zr, and AlSi 4Zr 5. Irradiation behavior of these intermetallic phases is discussed based on their constituents. Characterization of as-fabricated phase constituents and microstructure would help understand the irradiation behavior of these fuel plates, interpret post-irradiation examination, and optimize the processing parameters of monolithic fuel system.

Enhancing Corrosion and Wear Resistance of AA6061 by Friction Stir Processing with Fe78Si₉B13 Glass Particles.

Science.gov (United States)

Guo, Lingyu; Liu, Yan; Shen, Kechang; Song, Chaoqun; Yang, Min; Kim, Kibuem; Wang, Weimin

2015-08-07

The AA6061-T6 aluminum alloy samples including annealed Fe 78 Si₉B 13 particles were prepared by friction stir processing (FSP) and investigated by various techniques. The Fe 78 Si₉B 13 -reinforced particles are uniformly dispersed in the aluminum alloy matrix. The XRD results indicated that the lattice parameter of α-Al increases and the preferred orientation factors F of (200) plane of α-Al reduces after friction stir processing. The coefficient of thermal expansion (CTE) for FSP samples increases at first with the temperature but then decreases as the temperature further increased, which can be explained by the dissolving of Mg and Si from β phase and Fe 78 Si₉B 13 particles. The corrosion and wear resistance of FSP samples have been improved compared with that of base metal, which can be attributed to the reduction of grain size and the CTE mismatch between the base metal and reinforced particles by FSP, and the lubrication effect of Fe 78 Si₉B 13 particles also plays a role in improving wear resistance. In particular, the FSP sample with reinforced particles in amorphous state exhibited superior corrosion and wear resistance due to the unique metastable structure.

Development of non-dendritic microstructures in AA6061 cast billets

Energy Technology Data Exchange (ETDEWEB)

Zhang, X.-D.; Chadwick, T.A.; Bryant, J.D. [Reynolds Metals Co., Chester, VA (United States)

2000-07-01

Non-dendritic structures have been shown to have many advantages over conventional, dendritic structures in castable aluminum alloys. Examples include high structural integrity, reduced porosity, excellent formability and enhanced near net-shape forming capability. Non-dendritic materials are characterized by an equiaxed, globularized grain structure. Previous work has focused on the application of these structures in traditional casting alloys such as A356 and A357, and on the processing of these alloys during semi-solid forming and squeeze casting. There is considerably less information on the impact of non-dendritic microstructures upon solid state deformation, and the use of such microstructures in the processing of traditional wrought aluminum alloys. In this paper, we will present our recent work in casting non-dendritic AA6061 alloy using different techniques, and discuss the effects of cast structure on deformation behavior during solid state processing at elevated temperatures. Cast microstructures were modified during direct chill casting using three different methods: magneto-hydrodynamic (MHD) agitation, mechanical stirring, and high loadings of grain refiner. A detailed microstructure characterization will be presented and discussed in terms of structural integrity, grain morphology, and their effects on deformation in the solid state. (orig.)

Investigation of Microstructure and Microhardness in Self-Reacting Friction Stir Welded AA2014-T6 and AA2219-T87

Science.gov (United States)

Horton, K. Renee; McGill, Preston; Barkey, Mark

2011-01-01

Friction stir welding (FSW) is a solid state welding process with potential advantages for aerospace and automotive industries dealing with light alloys. Self-reacting friction stir welding (SR-FSW) is one variation of the FSW process being developed at the National Aeronautics and Space Administration (NASA) for use in the fabrication of propellant tanks. This work reports on the microstructure and microhardness of SR-FSW between two dissimilar aluminum alloys. Specifically, the study examines the cross section of the weld joint formed between an AA2014-T6 plate on the advancing side and an AA2219-T87 plate on the retreating side. The microstructural analysis shows an irregularly displaced weld seam from the advancing side past the thermo-mechanical affected zone (TMAZ) into the weld nugget region. There are sharp variations in the microhardness across the weld. These variations are described in the paper and mechanisms for their formation are discussed.

Mechanical Properties of SiC, Al2O3 Reinforced Aluminium 6061-T6 Hybrid Matrix Composite

Science.gov (United States)

Murugan, S. Senthil; Jegan, V.; Velmurugan, M.

2018-04-01

This paper contains the investigation of tensile, compression and impact characterization of SiC, Al2O3 reinforced Aluminium 6061-T6 matrix hybrid composite. Hybrid matrix composite fabrication was done by stir casting method. An attempt has been made by keeping Al2O3 percentage (7%) constant and increasing SiC percentage (10, 15, and 20%). After fabricating, the samples were prepared and tested to find out the various mechanical properties like tensile, compressive, and impact strength of the developed composites of different weight % of silicon carbide and Alumina in Aluminium alloy. The main objective of the study is to compare the values obtained and choose the best composition of the hybrid matrix composite from the mechanical properties point of view.

Effect of impact angles on ejecta and crater shape of aluminum alloy 6061-T6 targets in hypervelocity impacts

Directory of Open Access Journals (Sweden)

Hayashi K.

2012-08-01

Full Text Available The effect of the impact angle of projectiles on the crater shape and ejecta in thick aluminum alloy targets was investigated in hypervelocity impacts. When polycarbonate projectiles and aluminum alloy 6061-T6 target were used, the impact angle of the projectiles clearly affected the crater shape, as expected. The impact angle also affected the ejecta mass, ejecta size and scatter angle. However, the effect at 15∘ and 22.5∘ was not great. When the impact angles were 30∘ and 45∘, the effect was clearly confirmed. The impact angle clearly affected the axial ratio of ejecta fragments, c/a.

Texture analysis of a friction stir processed 6061-T6 aluminum alloy using neutron diffraction

International Nuclear Information System (INIS)

Woo, W.; Choo, H.; Brown, D.W.; Vogel, S.C.; Liaw, P.K.; Feng, Z.

2006-01-01

Time-of-flight neutron diffraction was used to investigate the texture changes in friction stir-processed (FSP) 6061-T6 aluminum alloy plates. Two different specimens were prepared with the purpose of separating the effects of frictional heating and severe plastic deformation on the changes of the preferred orientation in the as-received rolled plates: a plate processed with both stirring pin and tool shoulder, i.e., a regular FSP plate subjected to both severe plastic deformation and frictional heating (Case 1); and a plate processed only with the tool shoulder, i.e., subjected mainly to frictional heating (Case 2). The diffraction peak intensities provide insights into the texture variations at various locations across the centerline and through the thickness of the FSP plates. Comparison of the texture variations between Cases 1 and 2 clearly shows that the severe plastic deformation from the stirring pin affects the preferred orientation during the FSP, while heating alone from the tool shoulder has little effect

Influencia de la transferencia por arco sobre la microestructura de uniones soldadas usando arco pulsado//Influence of the transfer by arc on the microstructure of welded joint produced by pulsed arc

Directory of Open Access Journals (Sweden)

Sandra Patricia Romero-Nieto

2012-12-01

Full Text Available Este artículo estudia la influencia de la transferencia de arco pulsado en el proceso de soldadura por arco eléctrico con gas de protección (GMAW, Gas Metal Arc Welding, sobre la microestructura, utilizando dos composiciones de gas de protección y los modos de transferencia de arco pulsado y corto circuito. Se caracterizó la microestructura y las propiedades mecánicas y los resultados indican que se logra una mayor resistencia a la tensión y un perfil de dureza más homogéneo utilizando el modo de transferencia de arco pulsado, debido a que con esta existe una distribución más uniforme del tamaño de grano en lastres zonas de soldadura. La presencia de ferrita acicular fue una constante en todos los tratamientos evaluados, mientras la ferrita widmastatten se presentó con preferencia en la transferencia de arco pulsado.Palabras claves: transferencia en arco pulsado, proceso GMAW, mezclas de gases de protección._______________________________________________________________________________AbstractThis article studies the influence of pulsed arc transfer in the GMAW process on the microstructure, usingtwo shielding gas composition and the pulsed arc and short circuit transfer. The microstructure andmechanical properties was characterized and the results show that is achieved a greater tensile strengthand more homogeneous in the hardness profile using the pulsed arc transfer, because it creates a moreuniform size grain in the three areas of welding. The presence of a circular ferrite was constant in alltreatments tested, while widmastatten ferrite was presented preferably in the pulsed arc transfer.Key words: transfer in pulsed current, GMAW process, shielding gas mixtures

Caracterização microestrutural e comportamento mecânico das ligas de alumínio AA2139 T3 e T8 soldadas por fricção rotativa com mistura Microstructural characterization and mechanical behavior of an AA2139 T3 and T8 aluminum alloy joined by friction stir welding (FSW

Directory of Open Access Journals (Sweden)

Vinícius Toledo Saccon

2010-12-01

Full Text Available Este trabalho visou analisar a caracterização microestrutural e o comportamento mecânico das ligas de alumínio AA2139 T3 e T8 quando são soldadas pelo processo Soldagem por Fricção Rotativa com Mistura, o qual é realizado na fase sólida. A análise microestrutural foi realizada utilizando microscopia óptica e eletrônica de varredura, e o comportamento mecânico foi avaliado através de medidas de microdureza e ensaio de tração convencional complementado pelo sistema ARAMIS. As ligas foram soldadas nos mesmos parâmetros de soldagem e com a mesma ferramenta, a fim de avaliar a qualidade da junta soldada para as duas condições de tratamento térmico, T3 e T8. Os resultados obtidos mostraram soldas resistentes para ambos os tratamentos térmicos, porém com melhores propriedades mecânicas para a liga AA2139 T3.This work aimed to study the microstructural characterization and mechanical behavior of AA2139 T3 and T8 aluminum alloys joined by FSW - Friction Stir Welding. The microstructural analysis has been done using optical microscope and scanning electron microscopy, and the mechanical analysis were evaluate through microhardness testing and conventional tensile test using the ARAMIS system . Each alloy were welded using the same welding parameters and the same tool in order to evaluate the joint quality for both heat treatment used for this work, T3 and T8. The result showed sounds joints for both heat treatments, although with better mechanical properties for the alloy AA2139 T3.

Study of microstructural evolutions of the 6061-T6 aluminium alloy under irradiation

International Nuclear Information System (INIS)

Flament, Camille

2015-01-01

The 6061-T6 Aluminium alloy, whose microstructure contains Al(Fe,Mn,Cr)Si dispersoids and hardening needle-shaped β'' precipitates (Mg, Si), has been chosen as the structural material for the core vessel of the Material Testing Jules Horowitz Nuclear Reactor. Because it will be submitted to high neutron flux at a temperature around 50 C, it is necessary to study microstructural evolutions induced by irradiation and especially the stability of the second phase particles. In this work, an analytical study by in-situ and ex-situ electron and ion irradiations has been performed, as well as a study under neutron irradiation. The precipitate characterization by Transmission Electron Microscopy demonstrates that Al(Fe,Mn,Cr)Si dispersoids are driven under irradiation towards their equilibrium configuration, consisting of a core/shell structure, enhanced by irradiation, with a (Fe, Mn) enriched core surrounded by a Cr-enriched shell. In contrast, the (Mg,Si) β'' precipitates are destabilized by irradiation. They dissolve under ion irradiation in favor of a new precipitation of (Mg,Si,Cu,Cr,Al) rich clusters resulting in an increase of the alloy's hardness. β'' precipitates tend towards a transformation to cubic precipitates under neutron irradiation. (author) [fr

Arco Vara müüs poole Riia projektist norrakatele / Agnes Ojala

Index Scriptorium Estoniae

Ojala, Agnes

2007-01-01

Arco Vara tütarettevõte Arco Investeeringute AS ja Arco Vara Läti operatsioonide juht Viktors Savins müüsid poole Riia arendusprojektist Norra ettevõttele Linstow Baltic. Vt. samas: Arco Vara ehitab tivoli kortermaju täis

Microstructure and mechanical properties of spot friction stir welded ultrafine grained 1050 Al and conventional grained 6061-T6 Al alloys

International Nuclear Information System (INIS)

Sun, Y.F.; Fujii, H.; Tsuji, N.

2013-01-01

The ultrafine grained (UFGed) 1050 Al plates with a thickness of 2 mm, which were produced by the accumulative roll bonding technique after 5 cycles, were spot friction stir welded to 2 mm thick 6061-T6 Al alloy plates at different rotation speeds. Although the UFGed 1050 Al plates were used as the lower plates in order to reduce the heat generation therein during the welding process, the initial nano-sized lamellar structure still transformed into an equiaxial grain structure with a grain size of about 5.9 µm in the stir zone of the joints. Simultaneously, coarsening of the precipitates and formation of large quantities of nano-sized subgrains were found in the stir zone of the 6061 Al alloy plates. Microstructural observation by high resolution transmission electron microscope showed that the two plates were bonded through a transitional layer with a thickness of about 15 nm, within which a lot of screw dislocations formed due to the frictional force between the two plates. A mechanical properties evaluation revealed that the maximum shear tensile load can reach about 4127 N and the joints fractured just outside the hook region in the lower 1050 Al plate

Processamento de Ligas de Níquel com Técnica de Manufatura Aditiva Utilizando Plasma por Arco Transferido

Directory of Open Access Journals (Sweden)

Eduardo André Alberti

2015-06-01

Full Text Available ResumoA manufatura aditiva é um processo utilizado para a construção e reparos de peças que possuem geometria complexa ou que necessitem de gradiente de propriedades. Nessa técnica múltiplas camadas são depositadas para a construção da geometria do componente. O sucesso desse procedimento depende de fatores como a técnica de deposição, parâmetros, liga a ser depositada e condições da deposição, como temperatura e atmosfera protetora. Neste estudo, o potencial da técnica de Plasma por arco transferido para manufatura aditiva foi avaliado produzindo “paredes finas”, construídas a partir da sobreposição de cordões. Foram utilizadas duas ligas a base de níquel, uma endurecida por precipitação e outra endurecida por solução sólida. Durante os trabalhos, foram selecionados os parâmetros de processamentos, incluindo a avaliação do efeito do pré-aquecimento a 300°C. Resultados mostraram que a composição química da liga influencia a geometria da parede construída assim como a utilização de pré-aquecimento. Estruturas de solidificação exibindo dendritas refinadas com crescimento epitaxial entre camadas são identificadas. Entretanto, as características da liga determinam o perfil de dureza ao longo da seção transversal, sendo a liga endurecida por precipitação influenciada pelos ciclos térmicos de deposição e a liga endurecida por solução sólida pela diluição com o substrato. Em qualquer dos casos é recomendado a aplicação de tratamento térmico pós-soldagem para uniformização das propriedades.

Soldadura TIG y MIG de las aleaciones de aluminio 6061 y 7020. Estudios microestructurales y de propiedades mecánicas

Directory of Open Access Journals (Sweden)

Gómez de Salazar, J. M.

1998-05-01

Full Text Available The aluminium alloys of the 6XXX and 7XXX series, are actually considered of medium and high strength, and are been profusely used in different industries such as aeronautical, automotive, etc. However, its wide application as structural material needs of the proper development of their joining process. The present work describes the results obtained from the microstructural evaluation, both with optical and scanning electronic microscopies (OM and SEM, and of the mechanical one (hardness changes of the weld produced in the alloys using two different are welding techniques: GTAW (TIG and GMAW (MIG. For the last one, a filler metal with a composition of Al-5Mg, AWS denomination A5.10-92 (AA5356, has been used.

Las aleaciones de las series AA6XXX y AA7XXX están consideradas como de media y alta resistencia, y se utilizan con gran profusión en tecnologías como: aeronáutica, automoción, etc. Pero su aplicación como materiales estructurales pasa, sin duda, por el adecuado desarrollo de sus procesos de unión. En este trabajo, se realiza una evaluación microestructural, tanto mediante técnicas de microscopía óptica (MO como electrónica (MEB-EDS y de las propiedades mecánicas (evolución de la dureza de estas aleaciones, una vez que han sido sometidas a procesos de soldadura con arco, como son GTAW (TIG y GMAW (MIG, empleando un aporte de aleación de aluminio de composición Al-5Mg, cuya denominación es AWS A5.10-92 (AA5356.

Enhancing Corrosion and Wear Resistance of AA6061 by Friction Stir Processing with Fe78Si9B13 Glass Particles

Directory of Open Access Journals (Sweden)

Lingyu Guo

2015-08-01

Full Text Available The AA6061-T6 aluminum alloy samples including annealed Fe78Si9B13 particles were prepared by friction stir processing (FSP and investigated by various techniques. The Fe78Si9B13-reinforced particles are uniformly dispersed in the aluminum alloy matrix. The XRD results indicated that the lattice parameter of α-Al increases and the preferred orientation factors F of (200 plane of α-Al reduces after friction stir processing. The coefficient of thermal expansion (CTE for FSP samples increases at first with the temperature but then decreases as the temperature further increased, which can be explained by the dissolving of Mg and Si from β phase and Fe78Si9B13 particles. The corrosion and wear resistance of FSP samples have been improved compared with that of base metal, which can be attributed to the reduction of grain size and the CTE mismatch between the base metal and reinforced particles by FSP, and the lubrication effect of Fe78Si9B13 particles also plays a role in improving wear resistance. In particular, the FSP sample with reinforced particles in amorphous state exhibited superior corrosion and wear resistance due to the unique metastable structure.

Microstructural evolution and mechanical properties of as-cast and T6-treated AA2195 DC cast alloy

International Nuclear Information System (INIS)

Hekmat-Ardakan, A.; Elgallad, E.M.; Ajersch, F.; Chen, X.-G.

2012-01-01

The use of direct chill (DC) cast ingot plates of AA2195 alloys has been recently extended for large mold applications in the plastics and automotive industries. The microstructural evolution of the as-cast AA2195 alloy was investigated using the Factsage thermodynamic software under both equilibrium and non-equilibrium conditions, and was compared with the results from differential scanning calorimetry (DSC) analysis and microstructural observations. The as-cast microstructure exhibited the presence of Al 2 CuMg, Al 2 Cu and Al 2 CuLi intermetallic phases formed at the aluminum dendrite boundaries, which can be completely dissolved in the α-Al matrix during the solution treatment. A significant improvement in the mechanical properties of the AA2195 cast alloy after the T6 heat treatment is attributed to the formation of nano-scale θ′ (Al 2 Cu) and T1 (Al 2 CuLi) precipitates. However, the non-uniform distribution of T1 precipitates together with the large size and low density indicate that the role of θ′ precipitates in strengthening the AA2195 cast alloy is more dominant than that of the T1 precipitates, in contrast with the strengthening mechanism of the pre-deformed AA2195-T8 rolled products.

Effect of cooling methods on hole quality in drilling of aluminium 6061-6T

International Nuclear Information System (INIS)

Islam, M N; Boswell, B

2016-01-01

The influence of cooling method and drilling parameters on hole production has been investigated experimentally and analytically by measuring the hole quality. A three-level, three-parameter experiment was conducted using design-of-experiment methodology. The three levels of independent input parameters were: for cooling method—flood drilling, minimum quantity lubrication (MQL) drilling and cryogenic drilling; for feed rate—0.2, 0.3 and 0.4 mm/rev; and for cutting speed—60, 75 and 100 m/min. The selected work and tool materials were aluminium 6061-6T and high speed steel (HSS), respectively. The measured output parameters were the three most widely used quality characteristics of drilled holes - diameter error, circularity and surface roughness. The results were analysed applying three methods: Pareto ANOVA, Taguchi method and traditional analysis. The findings revealed that the cooling method has a significant effect on diameter error (contribution ratio 88.27%), moderate effect on surface roughness (contribution ratio 41.74%) and relatively small effect on circularity (contribution ratio 23.64%). The best results for the dimensional accuracy and surface roughness were achieved by MQL drilling. Cryogenic drilling produced the best circularity results; however, in terms of dimensional accuracy and surface roughness it was the worst. (paper)

The effect of surface corrosion damage on the fatigue life of 6061-T6 aluminum alloy extrusions

Energy Technology Data Exchange (ETDEWEB)

Weber, Matthew; Eason, Paul D.; Özdeş, Hüseyin; Tiryakioğlu, Murat, E-mail: m.tiryakioglu@unf.edu

2017-04-06

An investigation was performed where 6061-T6 extrusions were exposed to a 3.5% NaCl solution at pH 2 for 2 days and 24 days to create distinct surface flaws. The effect of these flaws on the rotating beam fatigue life was then investigated and analyzed by using Wöhler curves, Weibull statistics and scanning electron microscopy (SEM). It was determined that corrosion damage reduced the fatigue life significantly and specimens corroded for both 2-days and 24-days exhibited similar fatigue lives. Statistical analyses showed that fatigue life of all three datasets followed the 3-parameter Weibull distribution and the difference between the fatigue lives of two corroded datasets was statistically insignificant. Analysis of fracture surfaces showed that sizes of pits that led to fatigue crack initiation were very different in the two corroded datasets. Implications of the similarity in fatigue lives despite disparity in surface condition are discussed in detail in the paper.

Arco chimie focuses on PA at FOS

International Nuclear Information System (INIS)

Jackson, D.

1992-01-01

Arco Chimie France (Fos-sur-Mer), at a recent meeting at its southern France manufacturing site, emphasized that future strategy is strongly focused on its propylene oxide (PO) and derivatives activities. The F2.5 billion ($466 million)-Fe billion/year operation manufactures 200,000 m.t./year of PO, about 70% for captive use and the balance for the merchant market; 550,000 m.t./year of methyl tert butyl ether (MTBE); 97,000 m.t./year of polyols; and 70,000 m.t./year of propylene glycols. There has been talk of Arco modifying its Fos MTBE plant to make it flexible for ethyl tert-butyl ether (ETBE) output; the parent company already operates an MTBE/ETBE pilot unit at Corpus Christi, TX. But Arco Chimie notes there is insufficient bioethanol feedstock availability to convert all production to ETBE. The company would also require investment in new storage capacity for ethanol and ETBE. However, France's biofuels program is not yet clearly defined, and it is politically sensitive because it depends heavily on government subsidies offered to farmers. That, says Arco, makes it impossible to have an accurate idea of how much ethanol will be available

Arco to enter European PGE production with new Rotterdam plant

International Nuclear Information System (INIS)

Young, I.

1993-01-01

Arco Chemical (Newtown Square, PA) will enter production of propylene glycol ethers (PGEs) in Europe by building a 70,000-m.t./year plant at its Rotterdam site. Arco's board has approved the project, with construction to begin this year and completion expected in mid-1995. 'This new plant supports the company's long-standing strategy to increase its downstream integration in value-added derivatives of propylene oxide,' says Jack Oppasser, president of Arco Chemical Europe (Maidenhead, U.K.). 'It allows the company to sustain its strong position in the growing European glycol ether market.' Arco's move represents a challenge to Dow Europe (Horgen, Switzerland), which dominates the European PGE market. Dow is Europe's biggest producer of PGEs, with its Dowanol brands commanding a share greater than 50% of the estimated 90,000-m.t./year methyl-based PGE market. This was recently boosted by completion of the expansion of its plant at Stade, Germany, from 60,000 m.t./year to 110,000 m.t./year. While Arco does not currently make PGEs in Europe, it is the second-largest supplier, with about 15,000 m.t.-20,000 m.t./year, via 'third-party manufacturing arrangements' with European producers, including BP Chemicals, and imports from its 90-million lbs/year plant at Bayport, TX. However, Arco refuses to comment on this because of 'antitrust aspects.'

Transient thermal analysis during friction stir welding between AA2014-T6 and pure copper

Science.gov (United States)

Gadhavi, A. R.; Ghetiya, N. D.; Patel, K. M.

2018-04-01

AA2xxx-Cu alloys showed larger applications in the defence sectors and in aerospace industries due to high strength to weight ratio and toughness. FSW in a butt joint configuration was carried out between AA2014-T6 and pure Copper placing AA2014 on AS and Cu on RS. Temperature profiles were observed by inserting K-type thermocouples in the mid-thickness at various locations of the plate. A sharp decrease in temperature profiles was observed on Copper side due to its higher thermal conductivity. A thermal numerical model was prepared in ANSYS to compare the simulated temperature profiles with the experimental temperature profiles and both the temperature profiles were found to be in good agreement.

Uniform Corrosion and General Dissolution of Aluminum Alloys 2024-T3, 6061-T6, and 7075-T6

Science.gov (United States)

Huang, I.-Wen

Uniform corrosion and general dissolution of aluminum alloys was not as well-studied in the past, although it was known for causing significant amount of weight loss. This work comprises four chapters to understand uniform corrosion of aluminum alloys 2024-T3, 6061-T6, and 7075-T6. A preliminary weight loss experiment was performed for distinguishing corrosion induced weight loss attributed to uniform corrosion and pitting corrosion. The result suggested that uniform corrosion generated a greater mass loss than pitting corrosion. First, to understand uniform corrosion mechanism and kinetics in different environments, a series of static immersion tests in NaCl solutions were performed to provide quantitative measurement of uniform corrosion. Thereafter, uniform corrosion development as a function of temperature, pH, Cl-, and time was investigated to understand the influence of environmental factors. Faster uniform corrosion rate has been found at lower temperature (20 and 40°C) than at higher temperature (60 and 80°C) due to accelerated corrosion product formation at high temperatures inhibiting corrosion reactions. Electrochemical tests including along with scanning electron microscopy (SEM) were utilized to study the temperature effect. Second, in order to further understand the uniform corrosion influence on pit growth kinetics, a long term exposures for 180 days in both immersion and ASTM-B117 test were performed. Uniform corrosion induced surface recession was found to have limited impact on pit geometry regardless of exposure methods. It was also found that the competition for limited cathodic current from uniform corrosion the primary rate limiting factor for pit growth. Very large pits were found after uniform corrosion growth reached a plateau due to corrosion product coverage. Also, optical microscopy and focused ion beam (FIB) imaging has provided more insights of distinctive pitting geometry and subsurface damages found from immersion samples and B117

Microstructure, cold workability and strain hardening behavior of trimodaled AA 6061-TiO2 nanocomposite prepared by mechanical alloying

International Nuclear Information System (INIS)

Sivasankaran, S.; Sivaprasad, K.; Narayanasamy, R.

2011-01-01

Highlights: → Trimodaled composites consisting of UFG and CG matrix phases and ceramic phase were produced successfully. → Cold deformation behavior was investigated. → The 15% CG trimodaled composite yielded a high compressive strength of 935 MPa. → The 30% CG composite exhibited higher ductility while maintaining strength and toughness. - Abstract: In the present work, the improvement of compressive ductility while maintaining high strength and toughness for nanocrystalline materials by cold upsetting (incremental loads) of bulk trimodaled composite was studied. Mechanically alloyed nanocrystalline (NC) AA 6061 alloy powders reinforced with nano TiO 2 were blended with 0, 5, 10, 15, 20, 25, and 30 wt.% coarse grain (CG) elemental powders related to AA 6061 alloy composition to produce trimodal microstructure. The synthesized composite preforms were characterized by optical microscope, scanning electron microscope, transmission electron microscope and X-ray diffraction. The room temperature compressive deformation behavior was evaluated under triaxial stress state condition. With increasing percentage of CG phase in the nanocomposite, the gradual improvement in compressive ductility was observed at the cost of a small amount of strength but it favored the ease of deformation. The 15% CG trimodal composite exhibited an extremely high compressive strength of 935 MPa due to non-coalescence of individual CG particles and effective load transfer occurred in multi scale microstructures. But the 30% CG trimodal composite showed an incremental compressive ductility of around 16% while sacrificing a small amount of strength (845 MPa) and this composite displayed improved toughness (area under true effective stress and true effective strain curve) of over 600% than nanocomposite (0% CG). Also, the percentage cold workability of 30% CG composite was six times higher than that of 0% CG composite. Hence, the 30% CG trimodal composite was observed to be the good one as

Effective corrosion protection of AA6061 aluminum alloy by sputtered Al-Ce coatings

International Nuclear Information System (INIS)

Dominguez-Crespo, M.A.; Torres-Huerta, A.M.; Rodil, S.E.; Ramirez-Meneses, E.; Suarez-Velazquez, G.G.; Hernandez-Perez, M.A.

2009-01-01

Al-Ce coatings were deposited on silicon and AA6061 aluminum alloy substrates by DC magnetron sputtering using aluminum in combination with pure cerium targets. The materials were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and electrochemical impedance spectroscopy (EIS) in order to consider their application as high corrosion resistance coatings. The corrosion behavior of the films was studied using a NaCl aqueous solution (3.5 wt%). As for the characterization results, an apparent amorphous phase of aluminum oxide with small cerium compounds embedded in the matrix was detected by the X-ray diffraction patterns and HRTEM on the deposited films at 200 W and 4 Pa. At these conditions, AFM and SEM images evidenced crack-free coatings with low-roughness nanometric structures and columnar growth. EIS and Tafel results converged to indicate an inhibition of the corrosion reactions. The film displayed good stability in the aggressive medium and after 1 day of exposure underwent very little degradation. The variations in the impedance and Tafel characteristics were found to occur as a function of cerium content, which provokes important changes in the film protective properties.

Effective corrosion protection of AA6061 aluminum alloy by sputtered Al-Ce coatings

Energy Technology Data Exchange (ETDEWEB)

Dominguez-Crespo, M.A., E-mail: mdominguezc@ipn.m [Instituto Politecnico Nacional, GIPMAT CICATA-Altamira, km 14.5, Carretera Tampico-Puerto Industrial Altamira, C.P. 89600 Altamira, Tamps (Mexico); Torres-Huerta, A.M. [Instituto Politecnico Nacional, GIPMAT CICATA-Altamira, km 14.5, Carretera Tampico-Puerto Industrial Altamira, C.P. 89600 Altamira, Tamps (Mexico); Rodil, S.E. [Instituto de Investigacion en Materiales, Universidad Nacional Autonoma de Mexico, Circuito Exterior s/n, Ciudad Universitaria, Del. Coyoacan, C.P. 04510 Mexico, D.F. (Mexico); Ramirez-Meneses, E. [Instituto Politecnico Nacional, GIPMAT CICATA-Altamira, km 14.5, Carretera Tampico-Puerto Industrial Altamira, C.P. 89600 Altamira, Tamps (Mexico); Suarez-Velazquez, G.G. [Alumna del PTA del CICATA-Altamira IPN, km 14.5, Carretera Tampico-Puerto Industrial Altamira, C.P. 89600 Altamira, Tamps (Mexico); Hernandez-Perez, M.A. [Instituto Politecnico Nacional, ESIQIE, C.P. 07738 Mexico, D.F. (Mexico)

2009-12-30

Al-Ce coatings were deposited on silicon and AA6061 aluminum alloy substrates by DC magnetron sputtering using aluminum in combination with pure cerium targets. The materials were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and electrochemical impedance spectroscopy (EIS) in order to consider their application as high corrosion resistance coatings. The corrosion behavior of the films was studied using a NaCl aqueous solution (3.5 wt%). As for the characterization results, an apparent amorphous phase of aluminum oxide with small cerium compounds embedded in the matrix was detected by the X-ray diffraction patterns and HRTEM on the deposited films at 200 W and 4 Pa. At these conditions, AFM and SEM images evidenced crack-free coatings with low-roughness nanometric structures and columnar growth. EIS and Tafel results converged to indicate an inhibition of the corrosion reactions. The film displayed good stability in the aggressive medium and after 1 day of exposure underwent very little degradation. The variations in the impedance and Tafel characteristics were found to occur as a function of cerium content, which provokes important changes in the film protective properties.

Laser Shock Processing of 6061-T6 Al alloy with 1064 nm and 532 nm wavelengths

International Nuclear Information System (INIS)

Gomez-Rosas, G.; Rubio-Gonzalez, C.; Ocana, J.L.; Molpeceres, C.; Porro, J.A.; Morales, M.; Casillas, F.J.

2010-01-01

Laser Shock Processing (LSP) has been proposed as a competitive alternative technology to classical treatments for improving fatigue and wear resistance of metals. We present a configuration and results in the LSP concept for metal surface treatments in underwater laser irradiation at 532 nm and 1064 nm. The purpose of the work is to compare the effect of both wavelengths on the same material. A convergent lens is used to deliver 1.2 J/pulse (1064 nm) and 0.9 J/pulse (532 nm) in a 8 ns laser FWHM pulse produced by 10 Hz Q-switched Nd:YAG laser with spots of a 1.5 mm in diameter moving forward along the work piece. A LSP configuration with experimental results using a pulse density of 2500 pulses/cm 2 and 5000 pulses/cm 2 in 6061-T6 aluminum samples are presented. High level compressive residual stresses are produced using both wavelengths. It has been shown that surface residual stress level is comparable to that achieved by conventional shot peening, but with greater depths. This method can be applied to surface treatment of final metal products.

The effects of irradiation to 8x1026m-2 on the mechanical properties of 6061-T651 aluminum

International Nuclear Information System (INIS)

Alexander, D.J.

1995-01-01

The effects of irradiation on the mechanical properties of candidate structural materials are being examined. A key to the generation of useful neutron beams is allowing the neutrons produced in the core to escape. Therefore, an aluminum alloy has been selected for the first wall containment adjacent to the core, the Core Pressure Boundary Tube (CPBT), Alloy (6061 J651 Al 1.0Mg-0.6Si-0.3Cu-0.2Cr) with acceptable mechanical properties in unirradiated condition, low neutron cross-section, high thermal conductivity for heat removal. This alloy may also be used for the beam tubes and reflector tank. An irradiation program is underway to determine the effects of irradiation on the mechanical properties of 6061-T651 aluminium in particular the fracture toughness. This data will allow the operating lifetime of the CPBT to determined which will in turn determine its replacement schedule in the ANS. The first two capsules for the ANS Irradiation Effects program have been successfully irradiated to 10 26 and 8x10 26 m -2 (thermal flux), respectively, at a nominal irradiation temperature of 95 deg. C. The testing of the specimens of 6061-T651 aluminum has shown: 1. The yield and ultimate tensile strengths are increased by irradiation; 2. The uniform and total elongations are reduced, but useful ductility remains, even at the higher irradiation level; 3. The fracture toughness at 25 deg. C and 95 deg. C is unaffected by irradiation, but at 150 deg. C, it decreases with an increase in irradiation; 4. The tearing modulus of 6061-T651 is low in the unirradiated condition, and is reduced to very low values by irradiation. This alloy also shows a tendency for sudden unstable crack extension

Optimización del proceso de soldadura GMAW de uniones a tope de la aleación AA 6063-T5 basada en la metodología de superficie de respuesta y en la geometría del cordón de soldadura

Directory of Open Access Journals (Sweden)

Miguel, V.

2012-10-01

Full Text Available The geometry of the weld beads is characterized by the overhead, the width and the penetration. These values are indices of the behavior of the welded joint and therefore, they can be considered as factors that control the process. This work is performed to optimize the GMAW process of the aluminum alloy AA 6063-T5 by means of the response surface methodology (RSM. The variables herein considered are the arc voltage, the welding speed, the wire feed speed and the separation between surfaces in butt joints. The response functions that are herein studied are the overhead, the width, the penetration and the angle of the bead. The obtained results by RSM show high grade of agreement with the experimental values. The procedure is experimentally validated by welding for the theoretically obtained optimized technological conditions and a wide agreement between theoretical and experimental values is found.

La geometría de los cordones de soldadura es caracterizada por el sobreespesor, la anchura y la penetración. Estos valores son indicadores del comportamiento de la unión soldada por lo que pueden considerarse como factores de control del proceso. En el presente trabajo se efectúa la optimización del proceso de soldadura por arco GMAW de la aleación AA 6063-T5 mediante la metodología de la superficie de respuesta (MSR. Las variables consideradas son la tensión del arco, la velocidad de soldeo, la velocidad de alimentación del electrodo y la separación de las superficies a unir. Las funciones de respuesta consideradas son el sobreespesor, anchura, penetración y el ángulo del cordón. Los resultados obtenidos mediante MSR se ajustan muy bien a los valores experimentales. El procedimiento es validado experimentalmente mediante el soldeo, para las condiciones tecnológicas optimizadas obtenidas de forma teórica, existiendo una gran concordancia entre los valores teóricos y los experimentales.

Duplo arco aórtico: a quebra do silêncio Double aortic arch: the break of silence

Directory of Open Access Journals (Sweden)

Ana Rita Abrão

2011-03-01

Full Text Available Anéis vasculares representam 1-2% dos casos das cardiopatias congênitas. Relatamos um caso raro de duplo arco aórtico. Mulher, 60 anos, procurou atendimento na clínica médica apresentando 1 ano de história de disfagia, 6 meses de dispneia e 2 meses de dor torácica esporádica. Raio X de tórax revelou: hiperinsuflação pulmonar difusa, alargamento mediastinal, coração com volume e configurações normais, arco aórtico à direita e alterações degenerativas vertebrais. Tomografia computadorizada do tórax: arco aórtico duplo circundando e comprimindo a traqueia e o esôfago. Arco direito mais calibroso, emergindo dele o tronco braquiocefálico. Do arco esquerdo emergem a artéria carótida comum e a subclávia esquerda. Diagnóstico: anel vascular traqueoesofagiano decorrente do duplo arco aórtico, sendo o arco direito dominante. No presente caso, optou-se por seguimento clínico da paciente, levando-se em conta a intensidade dos sintomas apresentados.Vascular rings represent 1 to 2% of cases of congenital heart disease. We report a rare case of double aortic arch. A 60-year-old woman was admitted to the hospital presenting a one-year history of dysphagia, six months of dyspnea and two months of sporadic chest pain. Radiograph of the chest revealed diffuse pulmonary hyper inflation, widening of the mediastinum, heart of normal size and shape, a right-sized aortic arch, and degenerative changes of the thoracic spine. Computed tomography of the chest showed a double aortic arch encircling and compressing the trachea and the esophagus. The right aortic arch had a larger caliber, with brachiocephalic trunk arising from it. The left common carotid artery and the left subclavian artery arose from the left aortic arch. Diagnosis: tracheoesophageal vascular ring due to double aortic arch, with dominant right arch. In this case, we chose to follow the patient medically, taking into consideration the mildness of the symptoms.

A study on ultra-precision machining technique for Al6061-T6 to fabricate space infrared optics

Science.gov (United States)

Ryu, Geun-man; Lee, Gil-jae; Hyun, Sang-won; Sung, Ha-yeong; Chung, Euisik; Kim, Geon-hee

2014-08-01

In this paper, analysis of variance on designed experiments with full factorial design was applied to determine the optimized machining parameters for ultra-precision fabrication of the secondary aspheric mirror, which is one of the key elements of the space cryogenic infrared optics. A single point diamond turning machine (SPDTM, Nanotech 4μpL Moore) was adopted to fabricate the material, AL6061-T6, and the three machining parameters of cutting speed, feed rate and depth of cut were selected. With several randomly assigned experimental conditions, surface roughness of each condition was measured by a non-contact optical profiler (NT2000; Vecco). As a result of analysis using Minitab, the optimum cutting condition was determined as following; cutting speed: 122 m/min, feed rate: 3 mm/min and depth of cut: 1 μm. Finally, a 120 mm diameter aspheric secondary mirror was attached to a particularly designed jig by using mixture of paraffin and wax and successfully fabricated under the optimum machining parameters. The profile of machined surface was measured by a high-accuracy 3-D profilometer(UA3P; Panasonic) and we obtained the geometrical errors of 30.6 nm(RMS) and 262.4 nm(PV), which satisfy the requirements of the space cryogenic infrared optics.

Microestructura de una unión disímil AISI 321 y una aleación A 351 grado HK-40 obtenida mediante soldadura manual por arco eléctrico

Directory of Open Access Journals (Sweden)

Reilis Fuentes-Guilarte

2016-05-01

Full Text Available El objetivo fue establecer el comportamiento microestructural de una unión disímil de acero inoxidable austenítico AISI 321 y de la aleación A 351 grado HK 40 obtenida por fundición mediante soldadura manual por arco eléctrico y electrodos revestidos del tipo E 309 L-16. La estructura ferrita–austeníta que se forma en la unión del acero con la aleación es resultado del elevado contenido de carbono de la segunda. La baja velocidad de enfriamiento del cordón de soldadura revela ausencia de discontinuidades en el retículo cristalino de la zona afectada térmicamente y atenúa la formación de carburos de cromo del tipo Cr23C6, que puede formar la aleación A 351 grado HK 40 durante la difusión del volumen de fracción en masa del cromo.

Arco Vara asutaja müüs tüki firmast Toomas Toolile / Andres Eilart

Index Scriptorium Estoniae

Eilart, Andres

2008-01-01

Arti Arakase ettevõte Greatway müüs 5,25% Arco Vara aktsiatest ärimees Toomas Toolile. A. Arakas on koos teiste ärimeestega asutanud uue kinnisvarafirma EfTEN Capital. Ärimees T. Toolist. Lisa: Ühiseid projekte pole seni olnud

Comparison of susceptibility to pitting corrosion of AA2024-T4, AA7075-T651 and AA7475-T761 aluminium alloys in neutral chloride solutions using electrochemical noise analysis

International Nuclear Information System (INIS)

Na, Kyung-Hwan; Pyun, Su-Il

2008-01-01

The susceptibility to pitting corrosion of AA2024-T4, AA7075-T651 and AA7475-T761 aluminium alloys was investigated in aqueous neutral chloride solution for the purpose of comparison using electrochemical noise measurement. The experimentally measured electrochemical noises were analysed based upon the combined stochastic theory and shot-noise theory using the Weibull distribution function. From the occurrence of two linear regions on one Weibull probability plot, it was suggested that there existed two stochastic processes of uniform corrosion and pitting corrosion; pitting corrosion was distinguished from uniform corrosion in terms of the frequency of events in the stochastic analysis. Accordingly, the present analysis method allowed us to investigate pitting corrosion independently. The susceptibility to pitting corrosion was appropriately evaluated by determining pit embryo formation rate in the stochastic analysis. The susceptibility was decreased in the following order: AA2024-T4 (the naturally aged condition), AA7475-T761 (the overaged condition) and AA7075-T651 (the near-peak-aged condition)

De hechicera a santa: la piedad heroica de Juana de Arco

Directory of Open Access Journals (Sweden)

Isabel Balza

2011-01-01

Full Text Available En este artículo se discute la figura de Juana de Arco en tanto que héroe. Para ello examinamos los procesos judiciales que la condenan a muerte. Se trata de precisar si el sexo determina su modo de encarnar la heroicidad. Defendemos que su travestismo es una de las causas fundamentales de su condena, por la transgresión que supone de los límites de las normas de la Iglesia y de las rígidas regulaciones del binarismo de género. Juana de Arco ocupa un lugar de excepción simbólico y social al no haber en ese momento histórico un espacio conceptual que simbolice la posición masculina para las mujeres. Utilizamos los análisis de María Zambrano sobre Antígona para señalar la posición que ocupa Juana de Arco dentro de la estirpe de las «doncellas muertas». Por último, proponemos que Juana de Arco muestra una ética de la piedad desde ese lugar de excepción en la ciudadanía.

Influence of energy input in friction stir welding on structure evolution and mechanical behaviour of precipitation-hardening in aluminium alloys (AA2024-T351, AA6013-T6 and Al-Mg-Sc)

Energy Technology Data Exchange (ETDEWEB)

Weis Olea, Cesar Afonso [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Werkstofforschung

2008-12-04

Aluminium alloys AA2024 T351, AA6013 T6 and the recently developed Al-Mg-Sc for aircraft industry applications, which are usually considered difficult to weld by conventional fusion welding processes, demonstrate outstanding performance when joined by friction stir welding (FSW). The main feature of the process is to produce solid-state welds, where the maximum temperatures attained during the process are about 80 % that of the melting temperature of the base material. The process generates substantial plastic deformation, due to the solid-state stirring, and consequently creates a high dislocation density, which is a precursor to dynamic recrystallization, a metallurgical feature that characterizes the stir zone (weld centre). A relevant aspect considered, regarding precipitation-hardening aluminium alloys, is the deterioration of the mechanical properties in the weld zones, which are fundamentally attributed to changes in the characteristics of strengthening precipitates. Among the strengthening mechanisms acting in these aluminium alloys, the most important is basically dependent on the morphology, size and population of the precipitates. The thermal cycle and deformation generated during the FSW process alter the precipitation characteristics previously present in the base material. FSW input energy regulates the magnitude of the thermal cycle and the intensity of deformation taking place during the process, and it can be controlled by the welding parameters, affecting the precipitates evolution and consequently the mechanical properties of the joint. Nevertheless, there remains a lack of knowledge about the substructural evolution of these alloys during FSW, and its correlation with weld energy input and their respective mechanical properties, particularly for the Al-Mg-Sc alloy. The main objective of this work is to explain the micro and substructural evolution (emphasizing precipitates evolution) of AA2024- T351, AA6013-T6 and Al-Mg-Sc alloys in similar

Changes and risks: How ARCO manages international expansion

International Nuclear Information System (INIS)

Bowlin, M.R.; Downey, M.W.

1992-01-01

ARCO's return on capital employed for the past 6 years has been an industry-leading 11.1%. However, even ARCO has not been immune to the severe problems of the domestic oil and gas business, and ARCO believes these domestic problems are not likely to disappear quickly. ARCO's response has been twofold: a careful revamping of the domestic exploration and production arm; and thoughtful expansion of ARCO's international efforts. In the late 1980's ARCO's senior management concluded that oil reserves and corporate profit from exploration and production (E and P) could be most successfully increased by a larger presence in international investments. It was recognized that success would not come from merely pouring more money into international E and P but would require structural changes in operations and enhanced risk management

Las arenas negras de Mejías: nueva fuente para la obtención de consumibles para la soldadura por arco eléctrico

Directory of Open Access Journals (Sweden)

Amado Cruz-Crespo

2001-03-01

Full Text Available A partir de la caracterización química y mineralógica de las fracciones pesadas, magnéticas y electromagnéticas de las arenas negras del placer de Mejías, se logró confeccionar una carga metalúrgica para obtener una escoria útil como matriz de fundentes para la soldadura automática (SAW y una ferroaleación como carga aleante para diferentes consumibles de soldadura por arco eléctrico. La escoria obtenida presenta una composición de óxidos que garantiza las propiedades metalúrgicas y tecnológicas de la matriz de fundente deseado. La aleación compleja lograda por reducción carbotérmica en horno de arco eléctrico con crisol de grafito presenta relativamente altos contenidos de Mo (2,87 %, Nb(> 1,80 %, V(>1,20 %, entre otros elementos metálicos de alto valor metalúrgico para la soldadura manual (SMAW y automática (SAW.

Resistencia al desgaste de recubrimientos Fe-Nb-Cr-W, Nb, AISI 1020 y AISI 420 producidos por proyección térmica por arco eléctrico

Directory of Open Access Journals (Sweden)

López-Covaleda, E. A.

2013-10-01

Full Text Available The commercial materials 140MXC (with iron, tungsten, chrome, niobium, 530AS (AISI 1015 steel and 560AS (AISI 420 steel on AISI 4340 steel were deposited using thermal spray with arc. The aim of work was to evaluate the best strategy abrasive wear resistance of the system coating-substrate using the following combinations: (1 homogeneous coatings and (2 coatings depositing simultaneously 140MXC + 530AS and 140MXC + 560AS. The coatings microstructure was characterized using Optical microscopy, Scanning electron microscopy and Laser confocal microscopy. The wear resistance was evaluated through dry sand rubber wheel test (DSRW. We found that the wear resistance depends on the quantity of defects and the mechanical properties like hardness. For example, the softer coatings have the biggest wear rates and the failure mode was characterized by plastic deformation caused by particles indentation, and the other hand the failure mode at the harder materials was grooving. The details and wear mechanism of the coatings produced are described in this investigation.Mediante proyección térmica de arco eléctrico fueron depositados tres materiales comercialmente conocidos como: 140MXC (a base de hierro, wolframio, cromo y niobio, 530AS (acero AISI 1020 y 560AS (acero AISI 420, sobre acero AISI 4340. Con el objetivo de evaluar la mejor estrategia para incrementar la resistencia al desgaste abrasivo, los recubrimientos fueron depositados de dos formas: (1 monocapas homogéneas de cada material y (2 recubrimientos depositando con alambres disimiles de 140MXC + 530AS y 140MXC + 560AS. Los recubrimientos fueron caracterizados microestructuralmente mediante Difracción de rayos X, Microscopía óptica, Microscopía láser confocal y Microscopía electrónica de barrido. La evaluación de la resistencia al desgaste abrasivo se realizó mediante ensayo con arena seca y rueda de caucho (DSRW. Se encontró que la resistencia al desgaste depende entre otras de las

Respuesta Sísmica de un puente en Arco considerando la Fluctuación de la fuerza Axial

OpenAIRE

Chávez Aguirre, Hidalgo

2011-01-01

Los puentes en arco son estructuras que exhiben un comportamiento muy constante, ya que por un lado trabajan de una manera muy eficiente ante cargas permanentes y por el otro presentan un desempeño complejo ante la ocurrencia de temblores fuertes. El arco es un elemento con ductibilidad limitada debido a las elevadas fuerzas de compresión generadas por la carga permanente; además, dichas fuerzas pueden variar de manera importante durante la ocurrencia de un movimiento sísmico. Por lo anterio...

Effects of aging treatment and heat input on the microstructures and mechanical properties of TIG-welded 6061-T6 alloy joints

Science.gov (United States)

Peng, Dong; Shen, Jun; Tang, Qin; Wu, Cui-ping; Zhou, Yan-bing

2013-03-01

Aging treatment and various heat input conditions were adopted to investigate the microstructural evolution and mechanical properties of TIG welded 6061-T6 alloy joints by microstructural observations, microhardness tests, and tensile tests. With an increase in heat input, the width of the heat-affected zone (HAZ) increases and grains in the fusion zone (FZ) coarsen. Moreover, the hardness of the HAZ decreases, whereas that of the FZ decreases initially and then increases with an increase in heat input. Low heat input results in the low ultimate tensile strength of the welded joints due to the presence of partial penetrations and pores in the welded joints. After a simple artificial aging treatment at 175°C for 8 h, the microstructure of the welded joints changes slightly. The mechanical properties of the welded joints enhance significantly after the aging process as few precipitates distribute in the welded seam.

Dissimilar friction welding of 6061-T6 aluminum and AISI 1018 steel: Properties and microstructural characterization

International Nuclear Information System (INIS)

Taban, Emel; Gould, Jerry E.; Lippold, John C.

2010-01-01

Joining of dissimilar materials is of increasing interest for a wide range of industrial applications. The automotive industry, in particular, views dissimilar materials joining as a gateway for the implementation of lightweight materials. Specifically, the introduction of aluminum alloy parts into a steel car body requires the development of reliable, efficient and economic joining processes. Since aluminum and steel demonstrate different physical, mechanical and metallurgical properties, identification of proper welding processes and practices can be problematic. In this work, inertia friction welding has been used to create joints between a 6061-T6 aluminum alloy and a AISI 1018 steel using various parameters. The joints were evaluated by mechanical testing and metallurgical analysis. Microstructural analyses were done using metallography, microhardness testing, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray elemental mapping, focused ion beam (FIB) with ultra high resolution SEM and transmission electron microscopy (TEM) in TEM and STEM modes. Results of these analysis first suggested that joint strengths on the order of 250 MPa could be achieved. In addition, failures were seen in the plasticized layer on the aluminum side of the joint. Further, bond lines were characterized by a thin layer of formed Al-Fe intermetallic. This intermetallic layer averaged roughly 250 nm thick and compositionally appears related to the FeAl and Fe 2 Al 5 phases.

Effect of laser shot peening on precipitation hardened aluminum alloy 6061-T6 using low energy laser

Science.gov (United States)

Sathyajith, S.; Kalainathan, S.

2012-03-01

Mechanical properties of engineering material can be improved by introducing compressive residual stress on the material surface and refinement of their microstructure. Variety of mechanical process such as shot peening, water jet peening, ultrasonic peening, laser shot peening were developed in the last decades on this contrast. Among these, lasers shot peening emerged as a novel industrial treatment to improve the crack resistance of turbine blades and the stress corrosion cracking (SCC) of austenic stainless steel in power plants. In this study we successfully performed laser shot peening on precipitation hardened aluminum alloy 6061-T6 with low energy (300 mJ, 1064 nm) Nd:YAG laser using different pulse densities of 22 pulses/mm 2 and 32 pulses/mm 2. Residual stress evaluation based on X-ray diffraction sin 2 ψ method indicates a maximum of 190% percentage increase on surface compressive stress. Depth profile of micro-hardness shows the impact of laser generated shock wave up to 1.2 mm from the surface. Apart from that, the crystalline size and micro-strain on the laser shot peened surfaces have been investigated and compared with the unpeened surface using X-ray diffraction in conjunction with line broadening analysis through the Williamson-Hall plot.

Pulmón del soldador de arco

Directory of Open Access Journals (Sweden)

Luciana Molinari

2010-12-01

Full Text Available La siderosis del soldador o neumoconiosis siderótica fue descripta por Doig y McLaughlin en 1936 como una enfermedad pulmonar causada por la inhalación crónica de polvo de hierro en soldadores de arco eléctrico. Presentamos un caso de siderosis del soldador asociada a aumento de los niveles de ferritina, sin hallazgo de depósito de hierro en otros órganos y sin causas evidentes de hemosiderosis secundaria.

“Efecto de la Inducción de un Campo Magnético Axial en el Refinamiento de la Microestructura de la Soldadura del Acero para Tubería API-5L-X60 Soldado por Arco Sumergido (AS)”

OpenAIRE

López Melgarejo, Alejandro Ulises

2012-01-01

En el presente trabajo de tesis, se describe el efecto que tiene la agitación electromagnética producida por un campo magnético externo, debido a la aplicación de una bobina de alambre de cobre de 35.56 cm de diámetro, durante la soldadura de un acero API 5LX60 soldado por arco sumergido. Esta agitación, conlleva al refinamiento de grano de la microestructura columnar del cordón de soldadura, la cual es producida por el alto aporte térmico del mismo proceso. Durante la exper...

Large magnetoresistance in (AA')2FeReO6 double perovskites

International Nuclear Information System (INIS)

Teresa, J.M. de; Serrate, D.; Blasco, J.; Ibarra, M.R.; Morellon, L.

2005-01-01

We review the main structural, magnetic and magnetotransport properties of the intriguing (AA') 2 FeReO 6 magnetic double perovskites. As the average cation size decreases, the crystallographic structure at room temperature evolves from cubic [(AA') 2 =Ba 2 , Ba 1.5 Sr 0.5 , BaSr, Ba 0.5 Sr 1.5 ] to tetragonal [(AA') 2 =Sr 2 ] and monoclinic [(AA') 2 =Ca 0.5 Sr 1.5 , CaSr, Ca 1.5 Sr 0.5 , Ca 2 ]. The Curie temperature increases anomalously from ∼303K for Ba 2 to ∼522K for Ca 2 in sharp contrast with the observed behaviour in the isostructural compounds (AA') 2 FeMoO 6 . Other anomalous features in the (AA') 2 FeReO 6 series are: the large magnetic anisotropy, the large magnetoelastic coupling and the semiconducting behaviour of the monoclinic compounds. The monoclinic compounds undergo a structural/magnetic transition at T S below 125K. Three different magnetoresistance mechanisms have been identified: the intergrain negative magnetoresistance effect, which is present across the whole series of compounds, and in the case of the monoclinic compounds below T S a negative magnetoresistance effect associated to the melting of the low-temperature phase and a positive magnetoresistance effect only present in (AA') 2 =Ca 2 below T∼50K

Study of Dissimilar Welding AA6061 Aluminium Alloy and AZ31B Magnesium Alloy with ER5356 Filler Using Friction Stir Welding

Science.gov (United States)

Mahamud, M. I. I.; Ishak, M.; Halil, A. M.

2017-09-01

This paper is to study of dissimilar welding AA6061 aluminium alloy and AZ31B magnesium alloy with ER5356 filler using friction stir welding. 2 mm thick plates of aluminium and magnesium were used. Friction stir welding operations were performed at different rotation and travel speeds and used the fixed tilt angle which is 3°. The rotation speeds varied from 800 to 1100 rpm, and the travel speed varied from 80 to 100 mm/min. In the range rotation speed of 800 to 1000 rpm and welding speed of 80 to 100 mm/min there are no defect at the weld. Tensile test show the higher tensile strength is 198 MPa and the welding efficiency is about 76%.

Deformaciones de un arco de hormigón armado bi-empotrado del puente sobre el Río San Pablo por medio de análisis dinámico

OpenAIRE

Jara Landivar, Jaime Eduardo

2015-01-01

El presente trabajo consistió en realizar varios análisis para determinar por diferentes métodos las deformaciones de un arco de hormigón armado biempotrado de la estructura del puente sobre el río San Pablo ubicado en el acceso norte a la ciudad de Babahoyo en la provincia de Los Ríos, cuya configuración estructural es de dos arcos de hormigón armado que soportan péndolas con cables de acero de alta resistencia y baja relajación y sostienen el tablero del puente vehicular, utilizando métodos...

Effect of thermal tempering on microstructure and mechanical properties of Mg-AZ31/Al-6061 diffusion bonding

Energy Technology Data Exchange (ETDEWEB)

Jafarian, Mojtaba [Young Researchers and Elite Club, Science and Research Branch, Islamic Azad University, Tehran (Iran, Islamic Republic of); Rizi, Mohsen Saboktakin, E-mail: M.saboktakin@Pa.iut.ac.ir [Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111 (Iran, Islamic Republic of); Department of Industrial Engineering, Lenjan Branch, Islamic Azad University, Isfahan (Iran, Islamic Republic of); Jafarian, Morteza [Young Researchers and Elite Club, Science and Research Branch, Islamic Azad University, Tehran (Iran, Islamic Republic of); Honarmand, Mehrdad [Department of Mechanical Engineering, Tiran Branch, Islamic Azad University, Isfahan (Iran, Islamic Republic of); Javadinejad, Hamid Reza; Ghaheri, Ali [Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111 (Iran, Islamic Republic of); Department of Industrial Engineering, Lenjan Branch, Islamic Azad University, Isfahan (Iran, Islamic Republic of); Bahramipour, Mohammad Taghi [Materials Engineering Department, Hakim Sabzevari University, Sabzevar, 397 (Iran, Islamic Republic of); Ebrahimian, Marzieh [Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111 (Iran, Islamic Republic of); Department of Industrial Engineering, Lenjan Branch, Islamic Azad University, Isfahan (Iran, Islamic Republic of)

2016-06-01

The objective of this study is to investigate the effect of the types thermal tempering of aluminum alloy on microstructure and mechanical properties of AZ31-O Mg and Al 6061-T6 diffusion bonding. Using Optical Microscope (OM) and Scanning Electron Microscopes (SEM) equipped with EDS analysis and line scan the interfaces of joints were evaluated. The XRD analysis was carried out to characterize phase constitution near the interface zone. The mechanical properties of joints were measured using Vickers micro-hardness and shear strength. According to the results in bonding of AZ31-Mg/Al-6061-O, in less plastic deformation in magnesium alloy, diffusion rate of most magnesium atoms occurred to aluminum alloy and formation of diffusion zone with minimum micro-hardness (140 HV) and maximum shear strength (32 MPa) compared to Al 6061-T6/Mg-AZ31 bonding. Evaluation of fracture surfaces indicates an occurrence of failure from the brittle intermetallic phases. - Highlights: • Diffusion bonding AZ31 to Al-6061withoutany interlayer was successful. • Thermal tempered aluminum alloy plays a vital role in the mechanical properties of joint. • Less thickness of reaction layers and micro-hardness in bonding annealed Al- 6061 layers to AZ31 was achieved. • Fracture surfaces indicated that the onset of fracture from intermetallic compounds resulted in fracture of the cleavage.

Effect of thermal tempering on microstructure and mechanical properties of Mg-AZ31/Al-6061 diffusion bonding

International Nuclear Information System (INIS)

Jafarian, Mojtaba; Rizi, Mohsen Saboktakin; Jafarian, Morteza; Honarmand, Mehrdad; Javadinejad, Hamid Reza; Ghaheri, Ali; Bahramipour, Mohammad Taghi; Ebrahimian, Marzieh

2016-01-01

The objective of this study is to investigate the effect of the types thermal tempering of aluminum alloy on microstructure and mechanical properties of AZ31-O Mg and Al 6061-T6 diffusion bonding. Using Optical Microscope (OM) and Scanning Electron Microscopes (SEM) equipped with EDS analysis and line scan the interfaces of joints were evaluated. The XRD analysis was carried out to characterize phase constitution near the interface zone. The mechanical properties of joints were measured using Vickers micro-hardness and shear strength. According to the results in bonding of AZ31-Mg/Al-6061-O, in less plastic deformation in magnesium alloy, diffusion rate of most magnesium atoms occurred to aluminum alloy and formation of diffusion zone with minimum micro-hardness (140 HV) and maximum shear strength (32 MPa) compared to Al 6061-T6/Mg-AZ31 bonding. Evaluation of fracture surfaces indicates an occurrence of failure from the brittle intermetallic phases. - Highlights: • Diffusion bonding AZ31 to Al-6061withoutany interlayer was successful. • Thermal tempered aluminum alloy plays a vital role in the mechanical properties of joint. • Less thickness of reaction layers and micro-hardness in bonding annealed Al- 6061 layers to AZ31 was achieved. • Fracture surfaces indicated that the onset of fracture from intermetallic compounds resulted in fracture of the cleavage.

A three-dimensional fully coupled thermo-mechanical model for Self-reacting Friction Stir Welding of Aluminium AA6061 sheets

International Nuclear Information System (INIS)

Singh, Piyush; Biswas, Pankaj; Kore, Sachin D.

2016-01-01

In the present work a three dimensional model of self-reacting friction stir welding in aluminium alloy AA6061 has been developed based on the Computational Fluid Dynamics (CFD) approach using COMSOL Multiphysics software. The temperature dependent material properties have been incorporated in the model from available literature. A slip-stick contact between the workpiece and tool surface has been considered with the slip factor varying linearly with distance. The methodology adopted has been validated with experimental results available in the literature. The temperature distribution observed has been found to be asymmetric about the weld centre line. The maximum temperature has been observed on the advancing side of the weld. However, the temperature distribution across the thickness has been found to be almost symmetric about the mid thickness plane. An hourglass shaped temperature distribution has been observed across the cross-section of the weld. The material flow velocity distribution shows that the deformation zone is limited to a very small region around the tool. (paper)

Efecto de la adición de caliza sobre el metal depositado por arco sumergido

Directory of Open Access Journals (Sweden)

Amado Cruz-Crespo

2012-12-01

Full Text Available Se evaluó el efecto del incremento de las adiciones de caliza en laobtención de un fundente al manganeso sobre la composición delmetal depositado por arco sumergido (proceso SAW. La adición decaliza se realizó manteniendo constante la relación porcentualMnO/SiO2 del sistema de óxidos del fundente. Con el aumento de labasicidad se logró intensificar la actividad termodinámica del MnO ydisminuir la del SiO2, favoreciéndose la transferencia del manganeso al metal depositado, a la vez que se atenúa la del silicio, el azufre, el fósforo y el carbono permanece prácticamente inalterable. Esto posibilita el empleo de un alambre de bajo manganeso durante lasoldadura de aceros de baja aleación con proceso SAW.

Interface and properties of the friction stir welded joints of titanium alloy Ti6Al4V with aluminum alloy 6061

International Nuclear Information System (INIS)

Wu, Aiping; Song, Zhihua; Nakata, Kazuhiro; Liao, Jinsun; Zhou, Li

2015-01-01

Highlights: • Friction stir butt welding of titanium alloy Ti6Al4V and aluminum alloy A6061-T6. • Welding parameters affect interfacial microstructure of the joint. • Welding parameters affect the mechanical property of joint and fracture position. • Joining mechanism of Ti6Al4V/A6061 dissimilar alloys by FSW is investigated. - Abstract: Titanium alloy Ti6Al4V and aluminum alloy 6061 dissimilar material joints were made with friction stir welding (FSW) method. The effects of welding parameters, including the stir pin position, the rotating rate and the travel speed of the tool, on the interface and the properties of the joints were investigated. The macrostructure of the joints and the fracture surfaces of the tensile test were observed with optical microscope and scanning electron microscope (SEM). The interface reaction layer was investigated with transmission electron microscopy (TEM). The factors affecting the mechanical properties of the joints were discussed. The results indicated that the tensile strength of the joints and the fracture location are mainly dependent on the rotating rate, and the interface and intermetallic compound (IMC) layer are the governing factor. There is a continuous 100 nm thick TiAl 3 IMC at the interface when the rotating rate is 750 rpm. When the welding parameters were appropriate, the joints fractured in the thermo-mechanically affected zone (TMAZ) and the heat affected zone (HAZ) of the aluminum alloy and the strength of the joints could reach 215 MPa, 68% of the aluminum base material strength, as well as the joint could endure large plastic deformation

Friction stir welding of 6061 aluminium alloy

International Nuclear Information System (INIS)

Abdel Rahman, M.A.M.S.

2009-01-01

6061 AA (Al-Mg-Si alloy) has gathered wide acceptance in the fabrication of light weight structures requiring a high strength-to-weight ratio and good corrosion resistance such as marine frames, pipelines, storage tanks, and aircraft components [1]. It is also used for the manufacturing of fuel elements in the nuclear research reactors. Compared to many of the fusion welding processes that are routinely used for joining structural alloys, friction stir welding (FSW) is a solid state joining process in which the material that is being welded is not melted and recast [2]. The welding parameters such as tool rotational speed, welding traverse speed, and tool profile play a major role in deciding the weld quality. Several FSW tools (differ from each other in pin angle, shoulder diameter, and shoulder concavity) have been used to fabricate a number of joints in order to obtain a tool with which a sound weld can be produced. It was found that the FSW tool with tapered cone pin, concave shoulder, and shoulder diameter equal to four times the welded plate thickness is suitable to produce a sound weld. The effect of the traverse speed on the global and local tensile properties of friction stir welded joints has been investigated in the 6061-T6 AA. The global tensile properties of the FSW joints were improved with increasing the traverse speed at constant rotation rate. It is found that the global tensile strength of the FSW joint is limited by the local tensile strength of the nearest region to the weld center at which the cross section is composed mainly of the HAZ. The effect of the initial butt surface on the formation of the zigzag line on the tensile properties of the welds was examined by using three types of welding samples differ in the preparation of the initial butt surface. The first type of samples welded without removing the oxide layer from the initial butt surface (uncleaned butt surfaces joint). In the second type of samples the oxide layer was removed from

FRATURA DO ARCO ZIGOMÁTICO NO PERÍODO DE CRESCIMENTO: ESTUDO EXPERIMENTAL EM RATOS

Directory of Open Access Journals (Sweden)

GOULART Alan Cruvinel

1998-01-01

Full Text Available O comportamento da fratura do arco zigomático no período de crescimento foi avaliado através de mensurações cefalométricas. Fratura com desvio medial no lado direito foi realizada em ratos com um mês de idade. Foi verificada tendência de retorno do arco fraturado à sua posição original, porém, com diferença estatisticamente significante para a profundidade da fossa infratemporal. Entretanto, não houve diferença significante para a distância entre o arco zigomático e a mandíbula, o que pode ser explicado pela presença de desvio significante da mandíbula.

High-strength bolt-forming of fine-grained aluminum alloy 6061 with a continuous hybrid process

International Nuclear Information System (INIS)

Kim, Ji Hun; Hwang, Sun Kwang; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min

2012-01-01

Highlights: ► Fine-grained AA6061-O was produced by a continuous hybrid process. ► It consists of rolling, ECAP, and drawing. ► High-strength bolt was manufactured with the fine-grained AA6061-O. ► The UTS and micro-hardness of the bolt was increased by 50%. ► The route C was better in making a uniform micro-hardness distribution in the bolt. - Abstract: It is well known that the development of a continuous manufacturing process to apply severe plastic deformation (SPD) is a major challenge for industrial usages to improve the mechanical properties of the material through grain refinement. In this study, fine-grained AA6061-O wire was manufactured by a two-pass hybrid process consisting of drawing, equal channel angular pressing and rolling in a continuous manner to investigate the effects of processing routes for two different routes, A and C, on the variation of ultimate tensile strength (UTS) and micro-hardness distribution. The UTS value (185 MPa) of the specimen processed by the two-pass hybrid process with route A was higher than that of 171 MPa obtained from the two-pass wire-drawing process and was equivalent to the level of 184 MPa processed by the three-pass wire-drawing process. The average micro-hardness value (Hv 58.0) obtained from the two-pass hybrid process through route C was the highest among all the cases. According to transmission electron microscopy, the original grain was subdivided and elongated owing to deformation during the processes. The specimen processed by the two-pass hybrid process through route C showed smaller deformation bands and had potentially higher angle grain boundaries compared to the specimen processed by the two-pass wire-drawing process. Finally, the high-strength bolt was manufactured using the fine-grained AA6061-O wire prepared by the continuous hybrid process to check its formability. A ductile fracture at the first thread right above the jaw was observed in the bolt tension test of the manufactured bolt

Dos lienzos firmados por Alonso del Arco en la parisina iglesia Saint-François de Sales

Directory of Open Access Journals (Sweden)

Delenda, Odile

2004-09-01

Full Text Available El inventario detallado realizado en las iglesias de París por los conservadores des Oeuvres d'Art Religieuses et Civiles del ayuntamiento de la capital francesa, puede reservar gratas sorpresas. Muy recientemente Guénola Groud, conservateur du Patrimoine y su equipo, pudieron localizar en la «Salle des mariages» de la nueva iglesia de Saint-François-de-Sales (Paris, XVIIème dos importantes lienzos de medio punto, la Adoración de los Pastores (Fig. 2 y la Adoración de los Magos (Fig. 1 firmados por el pintor Alonso del Arco (1635-1704 colaborador y discípulo de Antonio Pereda. Existen en efecto dos iglesias Saint-François-de-Sales. La más antigua, de 1873, está situada en la calle Brémontier mientras que la más reciente, construida entre 1911 y 1913, tiene su entrada principal en la calle Ampère…

Comportamiento a la Corrosión del Acero API X70 Soldado por el Proceso de Doble Arco Sumergido Inmerso en Diferentes Medios Corrosivos

Directory of Open Access Journals (Sweden)

Omar Francisco Montes

Full Text Available Resumen Los aceros API X70 son aplicados en fabricación y construcción de tuberías para el transporte de hidrocarburos, sin embargo, a un lapso de tiempo se degradan debido al medio ambiente al cual están expuestos; influyendo en la velocidad y tipo de corrosión sobre las superficies del metal base (MB, zona afectada por el calor (ZAC y zona de fusión (ZF. A fin de conocer y evaluar la susceptibilidad a la corrosión en uniones del acero API X70 sometido a diferentes medios corrosivos, varias pruebas se llevaron a cabo por el proceso de soldadura de doble arco sumergido (DSAW, por sus siglas en inglés, las cuales fueron inmersas en diferentes electrolitos: Cloruro de Sodio (NaCl al 3,5% y Agua (H2O a temperatura ambiente para conocer su comportamiento. Se utilizaron técnicas electroquímicas de ruido electroquímico (RE y curvas de polarización cíclica (CPC para obtener velocidad y tipo de corrosión producida en cada una de las muestras analizadas, incluyendo las tres zonas: MB, ZAC y ZF. Además, se utilizaron técnicas de caracterización como microscopía óptica (MO y microscopía electrónica de barrido (MEB para el análisis superficial. La mayoría de las soldaduras presentan corrosión mixta, con mayores velocidades de corrosión en 3,5% de NaCl.

Corrosion fatigue performance in simulated sea water of aluminium 6061-T651 welded using ER4043 filler wire

CSIR Research Space (South Africa)

Mutombo, K

2010-10-01

Full Text Available The fatigue life of Al6061-T651 for various applied stress amplitudes in the unwelded and welded conditions was significantly lower in 3.5% NaCl simulated sea water solution, compared to that in air. The damage ratio increased with a decrease...

Joint properties of dissimilar Al6061-T6 aluminum alloy/Ti–6%Al–4%V titanium alloy by gas tungsten arc welding assisted hybrid friction stir welding

International Nuclear Information System (INIS)

Bang, HanSur; Bang, HeeSeon; Song, HyunJong; Joo, SungMin

2013-01-01

Highlights: • Hybrid friction stir welding for Al alloy and Ti alloy joint has been carried out. • Mechanical strength of dissimilar joint by HFSW and FSW has been compared. • Microstructure of dissimilar joint by HFSW and FSW has been compared. - Abstract: Hybrid friction stir butt welding of Al6061-T6 aluminum alloy plate to Ti–6%Al–4%V titanium alloy plate with satisfactory acceptable joint strength was successfully achieved using preceding gas tungsten arc welding (GTAW) preheating heat source of the Ti alloy plate surface. Hybrid friction stir welding (HFSW) joints were welded completely without any unwelded zone resulting from smooth material flow by equally distributed temperature both in Al alloy side and Ti alloy side using GTAW assistance for preheating the Ti alloy plate unlike friction stir welding (FSW) joints. The ultimate tensile strength was approximately 91% in HFSW welds by that of the Al alloy base metal, which was 24% higher than that of FSW welds without GTAW under same welding condition. Notably, it was found that elongation in HFSW welds increased significantly compared with that of FSW welds, which resulted in improved joint strength. The ductile fracture was the main fracture mode in tensile test of HFSW welds

Emprego racional da Biomecânica em Ortodontia: "arcos inteligentes" Biomechanics in Orthodontics: "smart archwires"

Directory of Open Access Journals (Sweden)

Marcio Rodrigues de Almeida

2006-02-01

Full Text Available A versatilidade biomecânica propiciada pelos "arcos inteligentes" ("smart archwires" permite estratégias para cada tipo de má oclusão, diferenciada por nuances terapêuticas, que por sua vez geram um melhor controle do caso clínico. Os arcos multifuncionais (Arco de intrusão de nitinol CIA® e arco de retração Mushroom Loop® foram idealizados no intuito de simplificar o atendimento clínico do ortodontista que, municiado de recursos diagnósticos apropriados e sólidos, os utiliza como uma ótima alternativa entre as disponíveis para a resolução dos problemas e expectativas dos pacientes. Com o presente artigo procurou-se demonstrar que os arcos de intrusão de nitinol (CIA® e o arco de retração Mushroom Loop® são ferramentas poderosas no tratamento de pacientes com extrações dentárias que requerem um controle de ancoragem mais apropriado, bem como uma retração mais eficaz.The versatility of Biomechanics with the use of "smart wires" allows different strategies in order to achieve a better control in orthodontic cases. Multifunctional orthodontic wires (nickel-titanium intrusion arch-CIA® and M-loop® archwires were developed in order to provide advantages in clinical management for the orthodontists. Since the force system, along with the side effects, of theses wires is well understood it becomes easier to use noncompliance mechanics. The present paper showed the clinical applications of the "smart wires" (nickel-titanium intrusion arch and M-loop archwires capable of simultaneously performing different orthodontic movements in extraction cases which minimize the need for high anchorage control.

Corrosion behavior of Al6061 alloy weldment produced by friction stir welding process

Directory of Open Access Journals (Sweden)

Farhad Gharavi

2015-07-01

Full Text Available In this work, the corrosion behavior of welded lap joints of AA6061-T6 aluminum alloy produced by friction stir welding process has been investigated. Corrosion properties of welded lap joints were studied by cyclic polarization and electrochemical impedance spectroscopy tests. All tests were performed in an aerated 0.6 mol L−1 NaCl aqueous solution with pH = 6.5 at a temperature of 30 °C to characterize corrosion morphology and realize corrosion features of weld regions as opposed to the parent alloy. The microstructure of weld nugget (WN, heated affected zone (HAZ, and parent alloy were analyzed using scanning electron microscopy and energy dispersive spectroscopy. The experimental results indicated that the welding process has a major effect on the corrosion resistance, which possibly associated to the break-down and dissolution of intermetallic particles. It is supposed that an increasing in intermetallic distributed throughout the matrix of weld regions increases the galvanic corrosion couples. Furthermore, by decreasing the grain size in the weld regions, the susceptibility to corrosion is enhanced. The pitting corrosion and intergranular attack are the dominant corrosion types in the weld regions and the parent alloy.

Modelo matemático para el control integrado de la enfermedad por Flexibacter branchiophilus en la trucha arco iris Oncorhynchus mykiss

Directory of Open Access Journals (Sweden)

Jonny Edward Duque

2000-07-01

Full Text Available Se presentó un Modelo Matemático que describe la dinámica de la enfermedad de las branquias producida por la bacteria Flexibacter branchiophilus en la trucha arco iris Oncorhynchus mykiss. La interpretación se hace mediante tres ecuaciones diferenciales lineales ordinarias. Se incluye la tasa de mortalidad por la enfermedad, porcentaje de peces infectados que por tratamiento regresan a ser sanos y porcentaje de peces sanos que adquieren la enfermedad. En ausencia o presencia de la enfermedad y variando el tratamiento presenta un comportamiento comparable a las condiciones naturales de los cultivos truchícolas. Con tratamientos de alta efectividad las mortalidades se estabilizan a un nivel mínimo de perdida, locontrario con tratamientos de baja efectividad, los cuales permiten el incremento de la mortalidad a niveles de pérdida de la población casi a la totalidad. Se analiza además, el tiempo de vida medio de la población.

Evaluation of Surface Roughness by Image Processing of a Shot-Peened, TIG-Welded Aluminum 6061-T6 Alloy: An Experimental Case Study

Directory of Open Access Journals (Sweden)

Anas M. Atieh

2018-05-01

Full Text Available Visual inspection through image processing of welding and shot-peened surfaces is necessary to overcome equipment limitations, avoid measurement errors, and accelerate processing to gain certain surface properties such as surface roughness. Therefore, it is important to design an algorithm to quantify surface properties, which enables us to overcome the aforementioned limitations. In this study, a proposed systematic algorithm is utilized to generate and compare the surface roughness of Tungsten Inert Gas (TIG welded aluminum 6061-T6 alloy treated by two levels of shot-peening, high-intensity and low-intensity. This project is industrial in nature, and the proposed solution was originally requested by local industry to overcome equipment capabilities and limitations. In particular, surface roughness measurements are usually only possible on flat surfaces but not on other areas treated by shot-peening after welding, as in the heat-affected zone and weld beads. Therefore, those critical areas are outside of the measurement limitations. Using the proposed technique, the surface roughness measurements were possible to obtain for weld beads, high-intensity and low-intensity shot-peened surfaces. In addition, a 3D surface topography was generated and dimple size distributions were calculated for the three tested scenarios: control sample (TIG-welded only, high-intensity shot-peened, and low-intensity shot-peened TIG-welded Al6065-T6 samples. Finally, cross-sectional hardness profiles were measured for the three scenarios; in all scenarios, lower hardness measurements were obtained compared to the base metal alloy in the heat-affected zone and in the weld beads even after shot-peening treatments.

Amanteigamento por aspersão térmica na soldagem em operação de dutos de pequena espessura: estabilidade e penetração do arco voltaico Buttering by thermal spraying in welding in-service repair of pipes with small thickness: arc stability and penetration

Directory of Open Access Journals (Sweden)

Nilceu Novicki

2011-09-01

Full Text Available Este trabalho reúne resultados promissores sobre uma via alternativa de reparo em dutos e tubulações em operação com pequena espessura remanescente, envolvendo a recuperação prévia da parede do tubo por amanteigamento por processos de aspersão térmica. Avaliou-se a instabilidade apresentada pelo arco voltaico e alteração do perfil da zona fundida quando da deposição de solda por eletrodos revestidos sobre chapas de aço carbono previamente amanteigadas, com camadas de composição similar, pelos processos de aspersão térmica a chama e a arco-elétrico. Os resultados permitiram correlacionar a estabilidade do arco com o nível de oxidação das camadas aspergidas.( Medidas de temperatura do revestimento aspergido mostraram que, desde que o processo de aspersão ocorra de forma ininterrupta até a espessura final do revestimento, a temperatura superficial é crescente com a espessura do depósito, o que resulta num maior teor de óxidos, associado tanto à uma instabilidade do cordão como à uma maior penetração da poça fundida. Difratogramas de raios-X nas camadas aspergidas e análises do teor de oxigênio na zona fundida dos cordões de solda comprovaram a influência desse elemento na alteração do perfil da zona fundida. Como alternativa ao uso de ar comprimido, foi avaliada sua substituição pelo argônio como gás de arraste, verificando-se efeitos muito benéficos - redução significativa da penetração e boa estabilidade do arco voltaico - admite-se que advindos da redução da oxidação da camada aspergida pelo efeito protetor do gás inerte. A avaliação dos resultados permitiu estabelecer critérios de soldagem com menor risco de perfuração se comparados a uma condição sem revestimento prévio por aspersão térmica.This work brings promising results about an alternative way of welding in-service repair of pipes with low reminiscent thickness, which involves a previous buttering coating of the pipe wall by

CALIBRACIÓN DE LOS PARÁMETROS DE UN MODELO DE HORNO DE ARCO ELÉCTRICO EMPLEANDO SIMULACIÓN Y REDES NEURONALES

Directory of Open Access Journals (Sweden)

Mauricio Alexánder Álvarez López

Full Text Available El horno de arco eléctrico proporciona un medio relativamente simple para la fusión de metales. Se utiliza en la producción de acero de alta pureza, aluminio, cobre, plomo, entre otros metales. Sin embargo, los hornos de arco son considerados como la carga más nociva para el sistema eléctrico de potencia. Por consiguiente, resulta de gran importancia contar con modelos de horno de arco que permitan determinar con alto grado de aproximación el comportamiento de este tipo de carga, puesto que se podría evaluar su impacto en términos de índices de calidad de energía para el sistema de potencia al cual se conecten. Uno de los principales problemas que surge al utilizar los modelos matemáticos de arco eléctrico consiste en la calibración de los parámetros que describen la dinámica del modelo. En este documento se muestra un procedimiento para calibrar todos los parámetros de un modelo de horno de arco eléctrico de corriente alterna, dadas mediciones reales de tensiones y corrientes. Se utiliza una red neuronal multicapa como emulador del modelo del horno. La red neuronal se entrena empleando datos de simulación obtenidos del modelo del horno implementado en el entorno Matlab®-Simulink®. Una vez entrenada la red, los parámetros de interés se obtienen resolviendo un problema inverso. Los resultados obtenidos muestran un error máximo de 4,1 % en el valor eficaz de las corrientes del arco eléctrico.

Avaliação da resistência a corrosão de revestimentos metálicos depositados por aspersão térmica a arco: uma aplicação em trocadores de calor

Directory of Open Access Journals (Sweden)

Rodrigo Cardoso Costa

2014-12-01

Full Text Available Tubos de trocadores de calor de usinas termoelétricas a carvão sofrem desgaste corrosivo devido à presença de enxofre e condensação dos gases da combustão, tendo por consequência uma redução na eficiência global do equipamento. Uma opção para o aumento da resistência à corrosão em meios agressivos é a utilização de revestimentos aplicados pela tecnologia de aspersão térmica. A resistência à corrosão dá-se com o emprego de materiais mais resistentes que o substrato. Dentre os processos existentes de aspersão térmica, o que utiliza o arco elétrico como fonte de energia (Arc Spray, possui alta taxa de deposição e menor custo operacional, sendo assim, escolhido para o estudo. Para a determinação do melhor revestimento a ser utilizado, foram testadas ligas metálicas resistentes à corrosão, em comparação com o material empregado nos tubos dos trocadores de calor, ASTM 178A. A seleção do revestimento mais resistente foi feita por meio de ensaio de corrosão acelerada em câmara de SO2 e também através do ensaio de polarização. Verificou-se que o revestimento de alumínio apresentou os melhores resultados nos testes realizados, quando comparados com material utilizado atualmente nos trocadores de calor (ASTM 178A.

Optimización multiobjetivo del proceso de soldeo GMAW de la aleación AA 6063-T5 basado en la penetración y en la zona afectada térmicamente

Directory of Open Access Journals (Sweden)

Miguel, Valentín

2015-03-01

Full Text Available The selection of technological parameters in a welding process must be led to the optimized results of the operation. Penetration is one of the most decisive factors for the success of the joint. Another important factor is the Heat Affected Zone (HAZ, when the mechanical properties of this one are modified respecting to the base material. The way in which the technological variables of the process affects to both them, penetration and HAZ, are inverse in each case. This work presents an optimization methodology based on the Design of Experiments (DOE and the Response Surface Method (RSM of the GMAW process applied to the aluminum alloy AA 6063-T5. This research is focused to obtain penetration rates that make HAZ values to be suitable in current applications. Welding rate has been found to be the most significant technological parameter for controlling the process.La selección de los parámetros tecnológicos que regulan los procesos de soldadura por arco debe efectuarse de forma que se optimice el resultado de la operación. La penetración es uno de los factores decisivos, ya que es determinante en el modo de ejecutar el proceso así como en el comportamiento de la unión. Otro factor importante es la Zona Afectada Térmicamente (ZAT, cuando ésta presenta propiedades diferentes a las del material base. El modo en que afectan los parámetros tecnológicos en ambos, penetración y ZAT, es inverso a los objetivos que suelen plantearse. En este trabajo se presenta una metodología de optimización del proceso GMAW de la aleación AA 6063-T5 basado en el diseño de experimentos y la superficie de respuesta. Los resultados obtenidos permiten evaluar la conveniencia de fijar como objetivo valores de penetración tendentes a mantener ZAT en ratios asumibles. Se obtiene que la variable que más afecta a la optimización es la velocidad de soldadura.

Influences of pulsed current tungsten inert gas welding parameters on the tensile properties of AA 6061 aluminium alloy

International Nuclear Information System (INIS)

Senthil Kumar, T.; Balasubramanian, V.; Sanavullah, M.Y.

2007-01-01

Medium strength aluminium alloy (Al-Mg-Si alloy) has gathered wide acceptance in the fabrication of light weight structures requiring a high strength-to-weight ratio, such as transportable bridge girders, military vehicles, road tankers and railway transport systems. In any structural application of this alloy consideration its weldability is of utmost importance as welding is largely used for joining of structural components. The preferred welding process of aluminium alloy is frequently tungsten inert gas (TIG) welding due to its comparatively easier applicability and better economy. In the case of single pass TIG welding of thinner section of this alloy, the pulsed current has been found beneficial due to its advantages over the conventional continuous current process. The use of pulsed current parameters has been found to improve the mechanical properties of the welds compared to those of continuous current welds of this alloy due to grain refinement occurring in the fusion zone. Many considerations come into the picture and one need to carefully balance various pulse current parameters to arrive at an optimum combination. Hence, in this investigation an attempt has been made to study the influence of pulsed current TIG welding parameters on tensile properties of AA 6061 aluminium alloy weldments

Electrochemical behavior of anodized AA6063-T6 alloys affected by matrix structures

International Nuclear Information System (INIS)

Huang, Yung-Sen; Shih, Teng-Shih; Wu, Chen-En

2013-01-01

Highlights: ► Deformation after solution treatment introduced Al matrix to have deformation bands and few Si particles. ► Dislocations remained in the matrix lift up field potential and produce AlOOH oxide in the AAO film. ► The silicon-containing particles were found to trap in the AAO film. ► The silicon particles and the Al(OOH) oxide is significantly to influence the electrochemical behavior of AAO films. - Abstract: AA 6063 alloys were cold-rolled (CR) either before or after solution treatment (S) and then different samples were artificially aged (T6) to obtain different samples (CRST6 and SCRT6). The highest dislocation density was observed in the SCRT6 sample which also showed the lowest particle count among the three samples; ST6, CRST6 and SCRT6. Subsequently, all samples were anodized in a 15 wt% sulfuric acid solution for different time spans to obtain anodic aluminum oxide (AAO) films. The anodized samples were further analyzed with X-ray Photoelectron Spectroscopy (XPS) analysis. We determined that the constituent phases in the AAO film were composed of hydrated amorphous alumina, hydrated oxide (Al(OH) 3 ) and oxyhydroxide (AlOOH) phases together with some silicon-containing particles trapped in the films on all samples. In the electrochemical test, the silicon-containing particles and hydrated Al(OH) 3 oxide that existed at the electrolyte/film (e/f) interface were found to inversely influence the corrosion resistance of the anodized samples.

Hot Press as a Sustainable Direct Recycling Technique of Aluminium: Mechanical Properties and Surface Integrity.

Science.gov (United States)

Yusuf, Nur Kamilah; Lajis, Mohd Amri; Ahmad, Azlan

2017-08-03

Meltless recycling technique has been utilized to overcome the lack of primary resources, focusing on reducing the usage of energy and materials. Hot press was proposed as a novel direct recycling technique which results in astoundingly low energy usage in contrast with conventional recycling. The aim of this study is to prove the technical feasibility of this approach by characterizing the recycled samples. For this purpose, AA6061 aluminium chips were recycled by utilizing hot press process under various operating temperature (T s = 430, 480, and 530 °C) and holding times (t s = 60, 90, and 120 min). The maximum mechanical properties of recycled chip are Ultimate tensile strength (UTS) = 266.78 MPa, Elongation to failure (ETF) = 16.129%, while, for surface integrity of the chips, the calculated microhardness is 81.744 HV, exhibited at T s = 530 °C and t s = 120 min. It is comparable to theoretical AA6061 T4-temper where maximum UTS and microhardness is increased up to 9.27% and 20.48%, respectively. As the desired mechanical properties of forgings can only be obtained by means of a final heat treatment, T5-temper, aging after forging process was employed. Heat treated recycled billet AA6061 (T5-temper) are considered comparable with as-received AA6061 T6, where the value of microhardness (98.649 HV) at 175 °C and 120 min of aging condition was revealed to be greater than 3.18%. Although it is quite early to put a base mainly on the observations in experimental settings, the potential for significant improvement offered by the direct recycling methods for production aluminium scrap can be clearly demonstrated. This overtures perspectives for industrial development of solid state recycling processes as environmentally benign alternatives of current melting based practices.

Estudio mediante tres técnicas del módulo elástico de un material compuesto de Al(6061 con un alto contenido (40%vol de SiC

Directory of Open Access Journals (Sweden)

Fernández, R.

2001-04-01

Full Text Available The purpose of this investigation is to study the elastic behavior of a discontinuously reinforced composite material, Al(6061-40vol%SiC, by using three different procedures: Extensometry in uniaxial testing, pendulum elasticimeter, and propagation of acoustic signals in the material. The high ceramic content of this material provides it with a high stiffness without a significant increase in density. Because of this, the material is suitable as structural component in the automotive and aerospace industry.

El objetivo de esta investigación es estudiar el comportamiento elástico de un material compuesto con refuerzo discontinuo, Al(6061-40vol%SiC, mediante tres técnicas diferentes: extensometría para ensayos uniaxiales convencionales, elasticímetro pendular y mediante medidas de la velocidad de propagación de señales acústicas en el material. El alto contenido de la fase cerámica en este material le confiere elevada rigidez sin que su densidad aumente significativamente por lo que lo hacen adecuado como material estructural en diversas aplicaciones en el sector del transporte (automoción, aerospacial.

Microstructural variation through weld thickness and mechanical properties of peened friction stir welded 6061 aluminum alloy joints

Energy Technology Data Exchange (ETDEWEB)

Abdulstaar, Mustafa A., E-mail: mustafa.abdulstaar@gmail.com [Institute of Material Science and Engineering, Clausthal University of Technology, Agricolastr. 6, 38678 Clausthal-Zellerfeld (Germany); Al-Fadhalah, Khaled J. [Department of Mechanical Engineering, College of Engineering & Petroleum, Kuwait University, P.O. Box 5969, Safat 13060 (Kuwait); Wagner, Lothar [Institute of Material Science and Engineering, Clausthal University of Technology, Agricolastr. 6, 38678 Clausthal-Zellerfeld (Germany)

2017-04-15

The current study examined the effect of microstructure variation on the development of mechanical properties in friction stir welded joints of 6061-T6 aluminum alloy, which were subsequently processed by shot peening (SP). Following to FSW, fatigue specimens were extracted perpendicularly to the welding direction. Surface Skimming to 0.5 mm from crown and root sides of the joint was made and SP was later applied on the two sides using ceramic shots of two different Almen intensities of 0.18 mmA and 0.24 mmA. Microstructural examination by electron back scattered diffraction (EBSD) indicated variation in the grain refinement of the weld zone, with coarsest grains (5 μm) at the crown side and finest grains (2 μm) at the root side. Reduction of microhardness to 60 HV occurred in the weld zone for samples in FSW condition. Application of SP promoted significant strain hardening at the crown side, with Almen intensities of 0.24 mmA providing maximum increase in microhardness to 120 HV. On the contrary, only a maximum microhardness of 75 HV was obtained at the root side. The difference in strain hardening capability at the two sides was strongly dependent on grain size. The two Almen intensities produced similar distribution of compressive residual stresses in the subsurface regions that led to enhance the fatigue strength to the level of base metal for N ≥ 10{sup 5} cycles. Yet, the increase in fatigue strength was more pronounced with increasing Almen intensity to 0.24 mmA, demonstrating further enhancement by strain hardening. - Highlights: • Grain refinement was observed after friction stir welding of AA 6061-T6. • Reduction in microhardness and fatigue strength were obtained after welding. • Variation in grain refinement led to different hardening behavior after peening. • Shot peening induced beneficial compressive residual stresses. • Shot peening and surface skimming markedly improved the fatigue performance.

Nano Precipitation and Hardening of Die-Quenched 6061 Aluminum Alloy.

Science.gov (United States)

Utsunomiya, Hiroshi; Tada, Koki; Matsumoto, Ryo; Watanabe, Katsumi; Matsuda, Kenji

2018-03-01

Die quenching is applied to an age-hardenable aluminium alloys to obtain super-saturated solid solution. The application is advantageous because it can reduce number of manufacturing processes, and may increase strength by strain aging. If die quenching is realized in forging as well as sheet forming, it may widen industrial applicability further. In this study, Al-Mg-Si alloy AA6061 8 mm-thick billets were reduced 50% in height without cracks by die-quench forging. Supersaturated solid solution was successfully obtained. The die-quenched specimen shows higher hardness with nano precipitates at shorter aging time than the conventional water-quenched specimen.

Effects of Different Filler Metals on the Mechanical Behaviors of GTA Welded AA7A52(T6)

Science.gov (United States)

Shu, Fengyuan; Lv, Yaohui; Liu, Yuxin; Lin, Jianjun; Sun, Zhe; Xu, Binshi; He, Peng

2014-06-01

ER4043, ER5356, and AA7A52 on behalf of the Al-Si, Al-Mg, and Al-Zn-Mg-based welding material, respectively, were chosen as the filler metal to weld AA7A52(T6) plates by GTAW. The variance in mechanical performances of the joints caused by the various filler materials was investigated with reference to the SEM and EDS test results for the weld seam and the fracture surface. Failure was found in the seam for all the welded joints. With regard to the joint obtained with ER4043 welding wire, the total elongation was limited by the brittle intergranular compound Mg2Si of which Mg was introduced by convection mass transfer. As for the other two welds, the content ratio of Zn and Mg was found to play the dominant role in deciding the mechanical properties of the intergranular Mg-Zn compounds which were responsible for the tensile behavior of the joints. The content ratio (wt.%) of beyond 2:1 gave birth to the strengthening phase MgZn2 leading to a ductile fracture. Cr in the seam obtained with AA7A52 filler metal was found to enhance the strength of the joint through isolated particles.

Growth kinetics and microstructural evolution during hot isostatic pressing of U-10 wt.% Mo monolithic fuel plate in AA6061 cladding with Zr diffusion barrier

Science.gov (United States)

Park, Y.; Yoo, J.; Huang, K.; Keiser, D. D.; Jue, J. F.; Rabin, B.; Moore, G.; Sohn, Y. H.

2014-04-01

Phase constituents and microstructure changes in RERTR fuel plate assemblies as functions of temperature and duration of hot-isostatic pressing (HIP) during fabrication were examined. The HIP process was carried out as functions of temperature (520, 540, 560 and 580 °C for 90 min) and time (45-345 min at 560 °C) to bond 6061 Al-alloy to the Zr diffusion barrier that had been co-rolled with U-10 wt.% Mo (U10Mo) fuel monolith prior to the HIP process. Scanning and transmission electron microscopies were employed to examine the phase constituents, microstructure and layer thickness of interaction products from interdiffusion. At the interface between the U10Mo and Zr, following the co-rolling, the UZr2 phase was observed to develop adjacent to Zr, and the α-U phase was found between the UZr2 and U10Mo, while the Mo2Zr was found as precipitates mostly within the α-U phase. The phase constituents and thickness of the interaction layer at the U10Mo-Zr interface remained unchanged regardless of HIP processing variation. Observable growth due to HIP was only observed for the (Al,Si)3Zr phase found at the Zr/AA6061 interface, however, with a large activation energy of 457 ± 28 kJ/mole. Thus, HIP can be carried to improve the adhesion quality of fuel plate without concern for the excessive growth of the interaction layer, particularly at the U10Mo-Zr interface with the α-U, Mo2Zr, and UZr2 phases.

Growth kinetics and microstructural evolution during hot isostatic pressing of U-10 wt.% Mo monolithic fuel plate in AA6061 cladding with Zr diffusion barrier

International Nuclear Information System (INIS)

Park, Y.; Yoo, J.; Huang, K.; Keiser, D.D.; Jue, J.F.; Rabin, B.; Moore, G.; Sohn, Y.H.

2014-01-01

Phase constituents and microstructure changes in RERTR fuel plate assemblies as functions of temperature and duration of hot-isostatic pressing (HIP) during fabrication were examined. The HIP process was carried out as functions of temperature (520, 540, 560 and 580 °C for 90 min) and time (45–345 min at 560 °C) to bond 6061 Al-alloy to the Zr diffusion barrier that had been co-rolled with U-10 wt.% Mo (U10Mo) fuel monolith prior to the HIP process. Scanning and transmission electron microscopies were employed to examine the phase constituents, microstructure and layer thickness of interaction products from interdiffusion. At the interface between the U10Mo and Zr, following the co-rolling, the UZr 2 phase was observed to develop adjacent to Zr, and the α-U phase was found between the UZr 2 and U10Mo, while the Mo 2 Zr was found as precipitates mostly within the α-U phase. The phase constituents and thickness of the interaction layer at the U10Mo-Zr interface remained unchanged regardless of HIP processing variation. Observable growth due to HIP was only observed for the (Al,Si) 3 Zr phase found at the Zr/AA6061 interface, however, with a large activation energy of 457 ± 28 kJ/mole. Thus, HIP can be carried to improve the adhesion quality of fuel plate without concern for the excessive growth of the interaction layer, particularly at the U10Mo-Zr interface with the α-U, Mo 2 Zr, and UZr 2 phases

Dislocation polymorphism transformation of 6061-T651 aluminum alloy processed by laser shock processing: Effect of tempering at the elevated temperatures

International Nuclear Information System (INIS)

Ren, X.D.; Ruan, L.; Yuan, S.Q.; Ren, N.F.; Zheng, L.M.; Zhan, Q.B.; Zhou, J.Z.; Yang, H.M.; Wang, Y.; Dai, F.Z.

2013-01-01

The effects of tempering on surface topography and dislocation configuration of 6061-T651 aluminum alloy by laser shock processing (LSP) were investigated at the elevated temperatures. Surface topography and surface roughness were tested by a Surfcom 130A-Monochrome surface rough-meter. Morphologies of precipitated phases were monitored by scanning electron microscopy (SEM), and the dislocation configurations of samples after LSP were characterized by transmission electron microscope (TEM). The results showed that LSP had a beneficial effect on micro-hardness at elevated temperature. There was a little change of the surface roughness as subjected to LSP. The main strengthening mechanism of micro-hardness was dislocation strengthening and fine grain strengthening, and precipitated phase strengthening was the main strengthening mechanism at elevated temperature. “Dislocation polymorphism transformation” (DPT) effect was affirmed at elevated temperature, and the elevated temperature was principal element for inducing the DPT effect of 6061-T651 aluminum alloy by LSP

Correlação entre alterações lombares e modificações no arco plantar em mulheres com dor lombar

OpenAIRE

Borges,Cláudia dos Santos; Fernandes,Luciane Fernanda Rodrigues Martinho; Bertoncello,Dernival

2013-01-01

OBJETIVO: Avaliar provável correlação entre arco plantar, curvatura lombar e dores lombares. MÉTODOS: Foram avaliadas 18 mulheres com queixa de dor lombar, submetidas a uma avaliação que constava de dados pessoais e de um exame físico com medidas antropométricas, avaliação do arco plantar por meio fotopodoscopia, avaliação da postura do paciente por meio do biofotogrametria, ambos utilizando o programa SAPO, além de avaliação da dor lombar pela escala visual analógica (EVA). A idade média dos...

Electron drift velocities of Ar-CO2-CF4 gas mixtures

International Nuclear Information System (INIS)

Markeloff, R.

1994-11-01

The muon spectrometer for the D0 experiment at Fermi National Accelerator Laboratory uses proportional drift tubes filled with an Ar-CO 2 -CF 4 gas mixture. Measurements of drift velocity as a function of electric field magnitude for 90%-5%-5% and 90%-4%-6% Ar-CO 2 -CF 4 mixtures are presented, and our operational experiences with these gases at D0 is discussed

Influência da refusão por plasma na microestrutura de um revestimento Fe-Mn-Cr-Si depositado por aspersão térmica arco elétrico sobre aço inoxidável ASTM A743-CA6NM Influence of plasma remelting on the microstructure of Fe-Mn-Cr-Si arc thermal spray coating deposited on ASTM A743-CA6NM stainless steel

Directory of Open Access Journals (Sweden)

Anderson Geraldo Marenda Pukasiewicz

2012-03-01

Full Text Available ASTM A743-CA6NM é um aço inoxidável martensítico muito utilizado na fabricação de turbinas hidráulicas devido a sua elevada tenacidade, entretanto apresenta restrições com relação à regiões recuperadas por soldagem. Diferentes técnicas de deposição tem sido aplicadas com o intuito de reduzir ou eliminar a tensão residual. A deposição de revestimentos resistentes a cavitação é outra forma importante de aumentar a vida útil destes componentes. O objetivo deste trabalho é avaliar a influência do tipo e intensidade de corrente de refusão por plasma na microestrutura, composição química e microdureza de um revestimento Fe-Mn-Cr-Si resistente a cavitação depositado por aspersão térmica arco elétrico sobre aço ASTMA743-CA6NM. Observou-se que a adoção de menores valores de corrente média, assim como a utilização de corrente pulsada reduziram a formação de ferrita δ e a espessura final da ZTA, possibilitando a formação do revestimento com menores alterações na microestrutura do metal base. Verificou-se que a microestrutura e microdureza dos revestimentos refundidos não se mostraram muito sensível a variações na diluição do metal base. A utilização de corrente contínua promoveu um alinhamento da estrutura dendrítica no sentido da movimentação da tocha, entretanto este comportamento não foi observado em revestimentos refundidos com corrente pulsada.ASTM A743-CA6NM martensitic stainless steel have been used in hydraulic turbines manufacturing, but show some restrictions in welded recovered areas. Different techniques have been applied in order to reduce or eliminate residual stress, with life increase. The deposition of cavitation resistant coatings is another important way to increase the service life of these components. The objective of this study is evaluate the influence of type and intensity of plasma remelting current on the microstructure, chemical composition and microhardness of the Fe

Effect of strengthening mechanisms on cold workability and instantaneous strain hardening behavior during grain refinement of AA 6061-10 wt.% TiO2 composite prepared by mechanical alloying

International Nuclear Information System (INIS)

Sivasankaran, S.; Sivaprasad, K.; Narayanasamy, R.; Iyer, Vijay Kumar

2010-01-01

Research highlights: → Various strengthening mechanisms such as solid solution, grain size, precipitate, dislocation and dispersion strengthening promoted yield strength of the composites → The 5 h sintered composite yielded a large plastic strain (23%) at ambient temperature. → The domination of interparticle friction effects, grain size and dislocation strengthening diminished the deformation capacity of the composites greater than 5 h of milling. → Ultra-fine grained composite (40 h) yielded a high strength (>1000 MPa). → The proposed instantaneous new Poisson's ratio and the instantaneous strain hardening index used to study the extent of plastic zone and strain levels of the composite. - Abstract: The mechanical alloying (MA) of AA 6061 alloy reinforced with 10 wt.% fine anatase-titania composites powder milled with different timings (1, 5, 10, 20, 30, and 40 h) was cold consolidated and sintered. The main purpose of this study is to investigate the effect of microstructure and the various strengthening mechanisms such as solid solution, grain size, precipitate, dislocation and dispersion strengthening during grain refinement of AA 6061-10 wt.% TiO 2 composite via MA on cold working and strain hardening behavior. The sintered composite preforms were characterized by X-ray diffraction, scanning electron microscope, and transmission electron microscope. The strengthening mechanisms were estimated by using simplified models available in the literatures. The evaluation of cold deformation behavior under triaxial stress condition through room temperature cold-upsetting tests (incremental loads) was studied by correlating the strengthening mechanisms. Among the developed strengthening mechanisms the grain size and dislocation strengthening mechanisms diminished the deformation capacity of the composites. The strain hardening behavior was also examined by proposing instantaneous strain hardening index (n i ). The value of maximum instantaneous strain

Empleo de cromitas refractarias para la obtención de fundentes aglomerados utilizados en la soldadura automática por arco sumergido (SAW

Directory of Open Access Journals (Sweden)

Perdomo-González, L.

2003-08-01

Full Text Available In the present work high carbon ferrochrome (load ferrochrome and slags are obtained, starting frora the métallurgie reductive processing of refractory chromites. The obtaining of alloys and slags is studied using an experiment design based in the relationships among components. The chemical compositions of alloys and slags guarantee their application for the conformation of alloys loads and matrix fluxes amassed for the superficial filling by means of submerged arc welding (SAW. The melting-reduction process is carried out in an electric arc furnace.

En el presente trabajo se obtienen ferrocromo de alto carbono (ferrocromo de carga y escorias a partir del proceso de reducción de cromitas refractarias. Mediante la utilización de un diseño de experimento de relaciones entre componentes, se estudia la obtención de aleaciones y escorias. La composición química de ambas garantiza su aplicación para la conformación de cargas aleantes y matrices de fundentes aglomerados, para el relleno superficial mediante soldadura automática por arco sumergido (SAW. El proceso de fusión-reducción se realiza en un horno eléctrico de arco.

Mechanical Behaviour Investigation Of Aluminium Alloy Tailor Welded Blank Developed By Using Friction Stir Welding Technique

Science.gov (United States)

Dwi Anggono, Agus; Sugito, Bibit; Hariyanto, Agus; Subroto; Sarjito

2017-10-01

The objective on the research was to investigate the mechanical properties and microstructure of tailor welded blank (TWB) made from AA6061-T6 and AA1100 using friction stir welding (FSW) process. Due to the dissimilar mechanical properties of the two aluminium alloys, microhardness test was conducted to measure the hardness distribution across the weld nugget. The mixing of two distinct materials was influenced by tool rotation speed. Therefore, microstructure analysis was carried out to investigate the grain size and shape. The grain size of AA6061-T6 has increased in the heat affected zone (HAZ) while for AA1100 has decreased. In the weld nugget, it has found a hook defects in the dissimilar aluminium joining. By using monotonic tensile load, the different weld line direction was observed with the expansion in tool rotation. The joints failure were consistently on the area of AA1100 series. Furthermore, two specimens were investigated, one through the dissimilar aluminium and the other through similiar material. Inspection of the weld nugget hardness was shown that nonhomogen material intermixing during the stiring process as confirmed by microhardness measurement.

Influences of post weld heat treatment on tensile strength and microstructure characteristics of friction stir welded butt joints of AA2014-T6 aluminum alloy

Science.gov (United States)

Rajendran, C.; Srinivasan, K.; Balasubramanian, V.; Balaji, H.; Selvaraj, P.

2016-08-01

Friction stir welded (FSWed) joints of aluminum alloys exhibited a hardness drop in both the advancing side (AS) and retreating side (RS) of the thermo-mechanically affected zone (TMAZ) due to the thermal cycle involved in the FSW process. In this investigation, an attempt has been made to overcome this problem by post weld heat treatment (PWHT) methods. FSW butt (FSWB) joints of Al-Cu (AA2014-T6) alloy were PWHT by two methods such as simple artificial aging (AA) and solution treatment followed by artificial aging (STA). Of these two treatments, STA was found to be more beneficial than the simple aging treatment to improve the tensile properties of the FSW joints of AA2014 aluminum alloy.

Método integral configurable y flexible de ensayo de materiales consumibles de soldadura por arco eléctrico. // Integral, flexible and shaped method for electric arc welding consumable materials test.

Directory of Open Access Journals (Sweden)

A. García Rodríguez

2005-05-01

Full Text Available La presente publicación propone un método integral configurable y flexible para facilitar el ensayo de materialesconsumibles de soldadura por arco eléctrico en las condiciones tecnológicas para las que han sido diseñados estosmateriales, en relación a la calidad de la unión soldada. Se puede llegar a conclusiones definitivas sobre la calidad de lasoldadura usando un determinado material consumible mediante: la relación operacional de técnicas de inteligencia naturaly/o artificial, el uso de sistemas expertos, el trabajo con bases de datos, la simulación y la realización práctica del procesomientras se registran ciertos parámetros del arco eléctrico, digitalmente procesados estadísticamente y relacionados a losresultados de la caracterización de la unión soldada. El método permite registrar adecuadamente la información referente acada aspecto del proceso exigida en los procesos de certificación de la calidad de los consumibles, así como en lainvestigación dirigida a optimizar la composición química y las propiedades físicas de un material, para obtener calidadesóptimas en un determinado proceso; además es posible obtener las bases de datos de parámetros del arco eléctrico útilespara investigar, desarrollar y valorar métodos y algoritmos para el monitoreo en tiempo real de la calidad de la soldaduradurante un determinado proceso tecnológico de soldadura con arco eléctrico.Palabras Clave: Ensayo, materiales, soldadura, arco eléctrico, estabilidad, calidad, simulación, optimización,unión soldada.___________________________________________________________________________Abstract.This paper presenst an integral, flexible and shaped method that make easy the electric arc welding consumable materials test at thedesigned technological conditions, related to the quality of the welding joint. It is possible to arrive to definitive conclusions about thewelding quality using a fixed material through: operational

Investigation on dissimilar underwater friction stir lap welding of 6061-T6 aluminum alloy to pure copper

International Nuclear Information System (INIS)

Zhang, Jingqing; Shen, Yifu; Yao, Xin; Xu, Haisheng; Li, Bo

2014-01-01

Highlights: • 6061-T6 Al and pure Cu were successfully underwater friction stir lap welded. • The underwater weld was analyzed via comparing with the classical weld. • The oxidation of Cu was prevented via the external water. • The amount of Al–Cu intermetallic was decreased by the external water. • The thickness of Al–Cu diffusion interlayer was decreased by the external water. - Abstract: Friction stir welding (classical FSW) is considered to offer advantages over the traditional fusion welding techniques in terms of dissimilar welding. However, some challenges still exist in the dissimilar friction stir lap welding of the aluminum/copper (Al/Cu) metallic couple, among which the formation of the Al–Cu intermetallic compounds is the major problem. In the present research, due to the fact that the formation and growth of the intermetallic are significantly controlled by the thermal history, the underwater friction stir welding (underwater FSW) was employed for fabricating the weld, and the weld obtained by underwater FSW (underwater weld) was analyzed via comparing with the weld obtained under same parameters by classical FSW (classical weld). In order to investigate the effect of the external water on the thermal history, the K-type thermocouple was utilized to measure the weld temperature, and it is found that the water could decrease the peak temperature and shorten the thermal cycle time. The XRD results illustrate that the interface of the welds mainly consist of the Al–Cu intermetallic compounds such as CuAl 2 and Cu 9 Al 4 together with some amounts of Al and Cu, and it is also found that the amount of the intermetallic in the underwater weld is obvious less than in the classical weld. The SEM images and the EDS line scan results also illustrate that the Al–Cu diffusion interlayer at the Al–Cu interface of the underwater weld was obviously thinner than that of the classical weld

Growth kinetics and microstructural evolution during hot isostatic pressing of U-10 wt.% Mo monolithic fuel plate in AA6061 cladding with Zr diffusion barrier

Energy Technology Data Exchange (ETDEWEB)

Park, Y.; Yoo, J.; Huang, K. [Advanced Materials Processing and Analysis Center, Department of Materials Science and Engineering, University of Central Florida, Orlando, FL 32816 (United States); Keiser, D.D.; Jue, J.F.; Rabin, B.; Moore, G. [Idaho National Laboratory, PO Box 1625, Idaho Falls, ID 83401 (United States); Sohn, Y.H., E-mail: Yongho.sohn@ucf.edu [Advanced Materials Processing and Analysis Center, Department of Materials Science and Engineering, University of Central Florida, Orlando, FL 32816 (United States)

2014-04-01

Phase constituents and microstructure changes in RERTR fuel plate assemblies as functions of temperature and duration of hot-isostatic pressing (HIP) during fabrication were examined. The HIP process was carried out as functions of temperature (520, 540, 560 and 580 °C for 90 min) and time (45–345 min at 560 °C) to bond 6061 Al-alloy to the Zr diffusion barrier that had been co-rolled with U-10 wt.% Mo (U10Mo) fuel monolith prior to the HIP process. Scanning and transmission electron microscopies were employed to examine the phase constituents, microstructure and layer thickness of interaction products from interdiffusion. At the interface between the U10Mo and Zr, following the co-rolling, the UZr{sub 2} phase was observed to develop adjacent to Zr, and the α-U phase was found between the UZr{sub 2} and U10Mo, while the Mo{sub 2}Zr was found as precipitates mostly within the α-U phase. The phase constituents and thickness of the interaction layer at the U10Mo-Zr interface remained unchanged regardless of HIP processing variation. Observable growth due to HIP was only observed for the (Al,Si){sub 3}Zr phase found at the Zr/AA6061 interface, however, with a large activation energy of 457 ± 28 kJ/mole. Thus, HIP can be carried to improve the adhesion quality of fuel plate without concern for the excessive growth of the interaction layer, particularly at the U10Mo-Zr interface with the α-U, Mo{sub 2}Zr, and UZr{sub 2} phases.

The effect of residual stress relaxation by the vibratory stress relief technique on the textures of grains in AA 6061 aluminum alloy

Energy Technology Data Exchange (ETDEWEB)

Wang, Jia-Siang; Hsieh, Chih-Chun; Lin, Chi-Ming; Chen, Erh-Chiang; Kuo, Che-Wei; Wu, Weite, E-mail: wwu@dragon.nchu.edu.tw

2014-05-01

The textures and crystallographic orientations beneath the treatment area in AA 6061 aluminum alloy after vibratory stress relief (VSR) process were investigated by combining the electron backscatter diffraction analysis of the misoriented low- or high-angle boundaries, the (inverse) pole figures, the line scans and the various grain orientations. The relaxation effect caused by compressive residual stress in the intermediate region is superior to that of tensile residual stress on both sides of the cantilever by means of X-ray diffraction techniques. The residual stress relaxation that occurs due to vibrational stress excitation accompanies the “orientation of banding” disintegration, the decreases in the dislocation density, the strain energy, and the fraction of low-angle boundaries within each type of grain orientation, such as Copper {112} 〈111〉, S {123} 〈634〉, Goss {110} 〈001〉, and Brass {110} 〈112〉, excepting the Cube (or near-Cube) {100} 〈001〉 grain orientation. The maintained invariance in the Cube texture can be attributed to the maximum number of active primary slip systems, resulting in an interaction that results from hindered slip on intersecting families of the planes.

The effect of residual stress relaxation by the vibratory stress relief technique on the textures of grains in AA 6061 aluminum alloy

International Nuclear Information System (INIS)

Wang, Jia-Siang; Hsieh, Chih-Chun; Lin, Chi-Ming; Chen, Erh-Chiang; Kuo, Che-Wei; Wu, Weite

2014-01-01

The textures and crystallographic orientations beneath the treatment area in AA 6061 aluminum alloy after vibratory stress relief (VSR) process were investigated by combining the electron backscatter diffraction analysis of the misoriented low- or high-angle boundaries, the (inverse) pole figures, the line scans and the various grain orientations. The relaxation effect caused by compressive residual stress in the intermediate region is superior to that of tensile residual stress on both sides of the cantilever by means of X-ray diffraction techniques. The residual stress relaxation that occurs due to vibrational stress excitation accompanies the “orientation of banding” disintegration, the decreases in the dislocation density, the strain energy, and the fraction of low-angle boundaries within each type of grain orientation, such as Copper {112} 〈111〉, S {123} 〈634〉, Goss {110} 〈001〉, and Brass {110} 〈112〉, excepting the Cube (or near-Cube) {100} 〈001〉 grain orientation. The maintained invariance in the Cube texture can be attributed to the maximum number of active primary slip systems, resulting in an interaction that results from hindered slip on intersecting families of the planes

Effects of die quench forming on sheet thinning and 3-point bend testing of AA7075-T6

Science.gov (United States)

Kim, Samuel; Omer, Kaab; Rahmaan, Taamjeed; Butcher, Clifford; Worswick, Michael

2017-10-01

Lab-scaled AA7075 aluminum side impact beams were manufactured using the die quenching technique in which the sheet was solutionized and then quenched in-die during forming to a super saturated solid state. Sheet thinning measurements were taken at various locations throughout the length of the part and the effect of lubricant on surface scoring and material pick-up on the die was evaluated. The as-formed beams were subjected to a T6 aging treatment and then tested in three-point bending. Simulations were performed of the forming and mechanical testing experiments using the LS-DYNA finite element code. The thinning and mechanical response was predicted well.

Tratamiento de la mordida cruzada anterior con plano inclinado anterior. Efecto sobre los arcos dentales

OpenAIRE

Carolina Rodríguez Manjarrés; Jesús Alberto Hernández Silva

2017-01-01

Objetivo: Evaluar los cambios dimensionales de los arcos dentales primarios tratados con plano inclinado anterior como método de corrección de la mordida cruzada anterior. Métodos: Se trataron 10 pacientes con edades entre 3 y 5 años afectados con mordida cruzada anterior completa, se colocó un plano inclinado anterior elaborado en acrílico, que estuvo en posición en promedio 8.5 semanas. Se obtuvieron modelos de estudio en 3 momentos T0: antes del tratamiento; T1: 6 meses después de iniciado...

Cooperación Territorial y articulación del Arco Mediterráneo

Directory of Open Access Journals (Sweden)

Antoni Durà Guimerà

2010-01-01

Full Text Available El presente artículo toma como referencia el artículo de Francisco Calvo García-Tornel para un dossier de la revista Méditerranée (1994, sobre «L'arc méditerranéen en questions». El profesor Calvo ponía el acento en las desigualdades y la desconexión de los territorios de dicho arco y propugnaba su vertebración a partir de las infraestructuras de transporte. Hoy el debate sobre estas cuestiones mantiene plena actualidad, incluido en un amplio abanico de problemáticas (economía, innovación, ordenación del territorio, medio ambiente, sanidad, educación, energía, etc. que registran una mejora cuando se aplican políticas de cooperación territorial entre los territorios que configuran el Arco. En este sentido existen numerosas iniciativas de carácter general, como la Euroregión Pirineos Mediterráneo, la Euroregión Alpes Mediterráneo o Arco Latino, así como otras de carácter sectorial (Intermed, Eurosud Transport, Ferrmed o CITRAME, en el caso de los trasportes, por ejemplo.

Artificial Intelligence Monitoring of Hardening Methods and Cutting Conditions and Their Effects on Surface Roughness, Performance, and Finish Turning Costs of Solid-State Recycled Aluminum Alloy 6061 Сhips

Directory of Open Access Journals (Sweden)

Adel Taha Abbas

2018-05-01

Full Text Available Aluminum Alloy 6061 components are frequently manufactured for various industries—aeronautics, yachting, and optical instruments—due to their excellent physical and mechanical properties, including corrosion resistance. There is little research on the mechanical tooling of AA6061 and none on its structure and properties and their effects on surface roughness after finish turning. The objective of this comprehensive study is, therefore, to ascertain the effects of both the modern method of hardening AA6061 shafts and the finish turning conditions on surface roughness, Ra, and the minimum machining time for unit-volume removal, Tm, while also establishing the cost price of processing one part, C. The hardening methods improved both the physical and the mechanical material properties processed with 2, 4, and 6 passes of equal channel angular pressing (ECAP at room temperature, using an ECAP-matrix with a channel angle of 90°. The reference workpiece sample was a hot extruded chip under an extrusion ratio (ER of 5.2 at an extrusion temperature of 500 °С (ET = 500 °C. The following results were obtained: grain size in ECAP-6 decreased from 15.9 to 2.46 μm, increasing both microhardness from 41 Vickers hardness value (HV to 110 HV and ultimate tensile strength from 132.4 to 403 MPa. The largest decrease in surface roughness, Ra—70%, was obtained turning a workpiece treated with ECAP-6. The multicriteria optimization was computed in a multilayer perceptron-based artificial neural network that yielded the following optimum values: the minimal length of the three-dimensional estimates vector with the coordinates Ra = 0.800 μm, Tm = 0.341 min/cm3, and С = 6.955 $ corresponded to the optimal finish turning conditions: cutting speed vc = 200 m/min, depth of cut ap = 0.2 mm, and feed per revolution fr = 0.103 mm/rev (ET-500 extrusion without hardening.

CHARACTERIZATION OF 6061 T651 ALUMINUM PLATES SUBJECTED TO HIGH-VELOCITY IMPACT LOADS

Directory of Open Access Journals (Sweden)

Evren ÖZŞAHİN

2011-06-01

Full Text Available Ballistic response of single or multi-layered metal armor systems subjected to kinetic energy pro-jectiles was investigated in many experimental, theoretical and numerical studies.In this study, 6061 T651 aluminum plates impacted by 9 mm bullets were investigated. Microstructural investigations have been carried out using optical microscopy. Microhardness values were used to determine the strength behavior of the plates. Influence of the plate thickness and impact velocity on the microstructure has been evaluated. It was concluded from the study that thinner plates are more prone to deformation hardening with high penetration depth values even at low impact velocities while thick plates are more susceptible to thermal softening with less penetration depths. Maximum hardness values were obtained just below the impact zone in both plate thicknesses.

Obtención simultánea de ferroaleación multicomponente y escoria a partir de arenas negras, para el desarrollo de consumibles de soldadura por arco eléctrico

Directory of Open Access Journals (Sweden)

Quintana-Puchol, R.

2004-08-01

Full Text Available In this paper, chemical and mineralogical characterizations of the black sands of the Mejias placer of Sagua de Tánamo (the most important beach littoral placer of the northwest of oriental Cuba are exposed. Starting from these characterizations a calculation strategy is developed for the making of the metallurgical load that allows to obtain simultaneously, when processed by carbothermic reduction in an electrical arc furnace, a multicomponent ferroalloy and a useful slag for the making of electric arch welding consumables. The powder of the obtained slag is agglomerated with liquid glass. The resulting pellets, due to their behavior on the submerged arc welding (SAW present technological and metallurgical properties that correspond with the requirements of an agglomerated flux matrix. The chemical composition of the multicomponent ferroalloy is constituted by metallic elements of high metallurgical and alloyed values (V, Cr, Mo, Ti, Nb. It is appropriate for the formulation of consumables for manual welding (SMAW and SAW, as well.

En este trabajo se expone una caracterización química y mineralógica de las arenas negras del placer Mejías de Sagua de Tánamo, el más importante placer litoral de playa del noroeste de Cuba Oriental. A partir de estas caracterizaciones se desarrolla una estrategia de cálculo para la confección de la carga metalúrgica, que permite obtener, simultáneamente, al ser procesada por reducción carbotérmica en un homo de arco eléctrico, una ferroaleación multicomponente y una escoria útil para la confección de consumibles de soldadura por arco eléctrico. El polvo de la escoria obtenida se aglomera con vidrio líquido. Los pelets resultantes y su comportamiento en la soldadura automática por arco sumergido (SAW, presentan propiedades metalúrgicas y tecnológicas que satisfacen los requisitos de una matriz de un fundente aglomerado. La composición química de la ferroaleación multicomponente est

Microstructure and microtexture studies of a friction stir welded Al 6061 alloy

International Nuclear Information System (INIS)

Kumbhar, N.T.; Tewari, R.; Dey, G.K.; Bhanumurthy, K.; Sahoo, S.K.; Samajdar, I.

2009-01-01

Friction stir welding is a solid state joining technique used extensively for the joining of various metals and alloys and also has been applied to the joining of steels. The friction stir welding of Al and its alloys has been extensively delt with over a period exceeding the last decade and a half due to its numerous advantages over other conventional fusion welding techniques in terms of weld quality, efficiency, cost effectiveness etc. to name a few. This technique is being increasingly seeked by industries in mass production/engineering such as the railways, marine and aerospace industries. The friction stir welding of a precipitation hardened Al 6061 alloy plates of 6 mm. thickness was performed at various tool rotation speeds and tool traverse speeds with a constant tilt of 3 deg using a high strength steel (HSS) tool of appropriate dimensions. The cross section of the weld perpendicular to the welding direction was analyzed for a detailed microstructural investigation using electron probe microanalysis, orientation imaging microscopy and transmission electron microscopy. Various microstructural changes are observed in the various regions of the friction stir welded AA 6061. The nugget region which is highly deformed is characterized by the dissolution and reprecipitation of the coarse precipitates, grain size refinement and recrystallization. The adjoining regions near the nugget viz the thermomechanically affected zone (TMAZ) and the heat affected zone (HAZ) also show heterogeneous microstructure in terms of grain size and precipitation which is mainly attributed to the heating cycle experienced during welding. This heterogeneity is also evident from the plot of microhardness distribution across the cross section of the weld region. However, the electron probe microanalysis studies do not show any significant pickup of oxygen in the weld interior as compared to a little oxygen pickup upto 30 μm from the top surface. Further, using orientation imaging

Sistema de visão por infravermelho próximo para monitoramento de processos de soldagem a arco Near-infrared vision system for arc-welding monitoring

Directory of Open Access Journals (Sweden)

Carolina Pimenta Mota

2013-03-01

Full Text Available A visão, o sentido predileto do ser humano, e sua grande capacidade de captar, processar e interpretar grandes quantidades de dados de natureza visual tem sido, ao longo dos anos, um grande estímulo para o desenvolvimento de técnicas e de dispositivos tecnológicos que a reproduzam num sistema computacional. Nos processos de soldagem, a visão pode fornecer dados na inspeção e qualidade da junta soldada, no monitoramento de parâmetros, na correção de trajetórias até, por fim, no estudo dos fenômenos envolvidos no processo. Porém, a radiação luminosa emitida pelo arco representa uma barreira para tais estudos baseados na visualização do processo. Uma das formas utilizadas atualmente para se obter a visualização do processo, sem a interferência do arco, consiste em iluminar o processo com o infravermelho próximo e utilizar filtros de interferência (passa-faixa, em torno deste mesmo comprimento de onda, durante a aquisição das imagens. Uma solução para a iluminação infravermelha, de aplicação crescente, envolve o uso de diodos laser de alta potência, com baixo custo e menor complexidade de instalação do que os lasers convencionais. Desta forma, a proposta deste trabalho foi a criação de um sistema de visão dos processos de soldagem a arco, de baixo custo e alta flexibilidade, indo desde a caracterização dos espectros de emissão luminosa do arco, passando pela criação de uma topologia de acionamento para o diodo de alta potência no infravermelho próximo, respeitando suas limitações de uso e maximizando a potência luminosa emitida, criação dos circuitos de controle, escolha dos equipamentos e componentes ópticos e, por fim, projeto e aplicação de um protótipo em processos de soldagem. As limitações do sistema de visão, como um todo, foram encontradas através de sua aplicação com soldagem TIG e MIG/MAG. Nestes ensaios, embora não tenha sido capaz de sobrepor a luz do arco, o sistema

Fas2-ELISA y la técnica de sedimentación rápida modificada por lumbreras en el diagnóstico de la infección por Fasciola hepática

Directory of Open Access Journals (Sweden)

Vicente Maco Flores

2002-04-01

Full Text Available La fasciolosis humana es un problema de salud pública debido a la mayor incidencia de casos reportados en los últimos años alrededor del mundo. La necesidad de contar con técnicas o métodos de diagnóstico para Fasciola hepatica de mayor sensibilidad y especificidad es importante tanto para la práctica clínica como para determinar zonas endémicas. Objetivo: Evaluar las técnicas coprológicas y serológicas para el diagnóstico de la infección por Fasciola hepatica en humanos. Material y métodos: La población de estudio comprendió a niños en edad escolar entre 1-16 años de edad, pertenecientes a una zona de alta endemicidad (Junin, Perú. Se obtuvieron un total de 194 muestras de heces y 158 muestras de suero. Se evaluaron tres métodos coproparasitológicos: Método de Concentración éter-formol (MCEF, Técnica de Sedimentación Espontánea (TSE y la Técnica de Sedimentación Rápida (TSR modificada por Lumbreras, y tres métodos serológicos: Arco 2, Western blot para F. hepatica y Fas2-ELISA. Resultados: La TSR modificada por Lumbreras fue la de mayor rendimiento (20.61% en comparación con la TSE (13.40% y MCEF (7.72%. La sensibilidad de Fas2-ELISA fue de 96.77% superior a la del Western blot y Arco 2, con sensibilidades de 71.87% y 35.48%, respectivamente. Conclusiones: La TSR es superior a TSE y MCEF para el diagnóstico de la fasciolosis humana en la fase crónica. Fas2-ELISA, es una prueba de inmunodiagnóstico altamente sensible y que se propone debe ser usada como la prueba de diagnóstico de fasciolosis humana y de tamizaje de la infección en poblaciones humanas que habitan en regiones de alta endemicidad para esta parasitosis.

Comportamiento en fluencia de un material compuesto de matriz metálica Al6061-15 vol % SiCw pulvimetalúrgico

Directory of Open Access Journals (Sweden)

González-Doncel, G.

2005-12-01

Full Text Available The creep behavior of a powder metallurgy (PM Al6061-15 vol % SiCw metal matrix composite has been studied. This behavior has been compared to that of 6061Al cast alloy and 6061Al PM alloy. The creep response of the PM unreinforced alloy is better than that of the cast 6061Al alloy. Similarly, the behavior of the composite is better than that of the PM unreinforced alloy. Two microstructural factors have been considered the responsible ones of this improvement. The first one is the dispersion of Al2O3 oxide particles of nanometric scale. The second one, is the presence of the SiC whisker reinforcement of micrometric scale. Despite the similar strengthening effect, the intrinsic nature of the reinforcing mechanism is, however, different for each type of particle due to the different microstructural scale.Se ha realizado un estudio de las propiedades en fluencia del material compuesto pulvimetalúrgico Al6061-15 vol % SiCw. Su comportamiento se ha comparado con el de la aleación Al6061 pulvimetalúrgica y la aleación Al6061 de colada. El comportamiento del material pulvimetalúrgico sin reforzar mejora respecto al del material de colada. Al mismo tiempo, el del material compuesto mejora respecto al comportamiento del material pulvimetalúrgico sin reforzar. Se consideran dos factores microestructurales como los principales responsables de la mejora de las propiedades en fluencia de este material compuesto. Por un lado, las partículas de Al2O3 de tamaño nanométrico y, por otro, las partículas de fibra corta cerámicas de SiC de tamaño micrométrico. Aunque ambos tipos de partículas dan lugar a un efecto de refuerzo similar, los mecanismos intrínsecos asociados a la presencia de estas partículas tienen una naturaleza diferente debido a la diferencia en la escala microestructural.

Microstructural evolution and mechanical properties of oil jet peened aluminium alloy, AA6063-T6

International Nuclear Information System (INIS)

Arun Prakash, N.; Gnanamoorthy, R.; Kamaraj, M.

2010-01-01

Grain size refinement by severe surface plastic deformation is one way of improving the surface properties. This paper describes the microstructural evolution due to severe surface plastic deformation by oil jet peening in aluminium alloy, AA6063-T6. Detail characterization of the treated surfaces using X-ray diffraction analysis and transmission electron microscopy revealed the formation of submicron size grains at and near the surface. The nozzle-traveling velocity decides the peening intensity and coverage and affects the surface properties. The specimen peened at low nozzle-traveling velocity exhibited an ultrafine grain size (∼210 nm) with high surface hardness (∼0.88 GPa), compressive residual stress (-102 ± 7 MPa) and dislocation density. The hardness is high at the surface and the depth of hardened layer is ∼400 μm. Formation of high-density dislocations and associated grain refinement resulted in increased surface hardness. Presence of surface modified layer will be beneficial in improving the fatigue and tribo behavior.

Phosphated in aluminium 6061-T651 used in the pool of the TRIGA Mark III nuclear reactor; Fosfatado en aluminio 6061-T651 utilizado en la tina del reactor nuclear TRIGA Mark III

Energy Technology Data Exchange (ETDEWEB)

Aguilar H, F.; Espinosa L, J.; Pena B, A.; Perez F, C.; Sanchez C, M.; Vite T, M.; Vite T, J. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

2001-07-01

We characterized a phosphated coating used a substrate in aluminium 6061-T651, which is used in the container of the TRIGA Mark III nuclear reactor. Characterization was made using MEB and X-ray diffraction techniques. Coating application has the function to prevent the corrosion. Coating was probed to test adhesion in accordance with the Standard ASTM D-4541, and the corrosion process using a salt spray (fog) camera, in accordance with the Standard ASTM B-117, so as we could phosphate the welding cord. These experiences were obtained using a Deep cell. Results obtained are going to phosphate 'in situ' using a mobile device which was patented for the National Institute of Nuclear Research (ININ) in the Mexican Institute of Intellectual Property (INPI). (Author)

Procesos metalúrgicos de aceros microaleados de alta resistencia 450 EMZ tipo II en la zona afectada térmicamente debido al efecto multipasada en soldaduras por arco sumergido

Directory of Open Access Journals (Sweden)

González-Palma, R.

2006-08-01

Full Text Available A considerable number of crack tip opening displacement tests in the heat affected zone (HAZ of multipass welds, performed in accordance with standards BS 5762 and EEMUA, are rejected since the crack is not inside the coarse grain region at 0.5 mm from the fusion border, as well as the quantity of the crack length in percentage, that the crack goes through the intercritical region instead of in the grain coarse region as it would correspond. This circumstance make advisable to carry out a metallographic study of the intercritical zone in the HAZ as well as the corresponding tests, in order analyze the intercritical region brittleness reasons. The study is performed on a HSLA 75 mm thick panel 450 EMZ type II, welded under a SAW process with heat input and welded parameters controlled, without any post weld heat treatment

La falta de cumplimiento de las normas BS 5762 y EEMUA, en considerables casos, invalida los ensayos de mecánica de la fractura, al no encontrarse la grieta en la región de grano grueso a 0,5 mm de la línea de fusión, así como en la cantidad expresada en porcentaje de longitud de grieta que atraviesa la región intercrítica, en lugar de hacerlo en la región de grano grueso. Esta circunstancia, conduce a realizar un estudio metalográfico de dicha región intercrítica de la zona afectada térmicamente así como los correspondientes ensayos, con objeto de analizar las causas de su fragilidad. Este estudio se realiza sobre un panel de chapa de acero microaleado de alto límite elástico, calidad EMZ 450 tipo II, de 75 mm de espesor, soldado bajo un proceso por arco sumergido, con energía calorífica aportada y parámetros de soldadura controlados, sin tratamiento térmico post-soldeo.

Optimización de los Parámetros de Soldadura por Arco Sumergido en Acero HSLA: una Aplicación para Manufactura de Tuberías de Conducción de Hidrocarburos

Directory of Open Access Journals (Sweden)

Patricia Sheilla Costa

2015-12-01

Full Text Available Resumen El acero HSLA (High Strength Low Alloy API 5L X70 es utilizado para fabricación de tuberías para transporte de hidrocarburos. La construcción de tuberías de este material involucra alta cantidad de soldadura, donde los parámetros empleados influyen directamente en las estructuras metalúrgicas y en las propiedades mecánicas del mismo cuando soldado. Así, para estudiar el impacto de los parámetros de soldadura por arco sumergido en la resistencia mecánica y dureza de la Zona Afectada por el Calor (ZAC, fue llevado a cabo un diseño central compuesto que totalizó 17 pruebas. Las variables de entrada fueron corriente, voltaje y velocidad de avance; como variables de salida se consideró resistencia a la tensión y dureza Vickers de la ZAC. Para tal estudio fue utilizado el proceso de soldadura por arco sumergido, pruebas de tensión y pruebas de dureza Vickers. Se utilizó la metodología de superficie de respuesta para el modelado y la optimización fue realizada utilizando algoritmos genéticos y la gráfica de frente de Pareto. Fueron obtenidas 16 combinaciones de parámetros con la optimización, de las cuales fue escogida una para validar los modelos. Con los resultados fue posible establecer modelos matemáticos empíricos satisfactorios para las variables de respuesta.

The effect of irradiation on the mechanical properties of 6061-T651 aluminum

International Nuclear Information System (INIS)

Alexander, D.J.

1992-01-01

Critical components of the Advanced Neutron Source (ANS) reactor, to be built at Oak Ridge National Laboratory (ORNL), will be fabricated from 6061-T651 aluminum alloy. This alloy has been selected for its favorable neutronic, thermal, and mechanical properties. The effect of irradiation on the tensile properties and fracture toughness has been studied to allow the lifetime of these components to be estimated. Irradiations were carried out in the High Flux Isotope Reactor at ORNL at a temperature of approximately 95 degree C to a fluence of approximately 10 26 m -2 (thermal). Testing was conducted from room temperature to 150 degree C. The yield and ultimate tensile strengths were increased by irradiation, and the total elongation decreased, but the fracture toughness at 26 and 95 degree C was not degraded by irradiation, and decreased only slightly at 150 degree C

Características del arco de soldadura TIG en diferentes atmósferas. I parte

Directory of Open Access Journals (Sweden)

Marques, R. V.

1999-10-01

Full Text Available Physical properties of gases as density, thermal and electric conductivity and ionization potential determine, to a great extent, the operational characteristics of welding arcs. These properties can vary strongly for different gases. As a result, arc voltage, heat output, mean radius, thermal profile, efficiency and other are characteristics that influence bead geometry (shape, depth, etc. depend on chemical composition of the shielding gas. Complex physical models have being proposed to explain and to quantify the effects of shielding gas chemical composition on the welding are performance. The influence of are atmosphere can also be readily observed empirically. However, only changes in arc operational parameters and weld bead geometry due to variations in gas composition are well registered in the literature. In this work, an optical study of the gas tungsten are is presented, based on a digital system for image capture and welding parameters register, during are operation. The results were related to physical properties of gases and mixtures used and models in literature.

Las propiedades físicas de los gases como densidad, conductividades térmica y eléctrica, potencial de ionización, entre otras, determinan en gran parte las características operacionales de los arcos de soldadura. Estas propiedades pueden variar bastante para diferentes gases. Así, parámetros como la tensión de la operación, el calor generado, el radio medio, el perfil térmico y el rendimiento del arco, que a su vez afectan la geometría (forma, anchura y penetración del cordón de soldadura, están muy influidos por la composición química del gas de protección utilizado. Se han propuesto modelos físicos más o menos complejos y completos para explicar y cuantificar los efectos de las variaciones de composición química del gas de protección sobre el comportamiento del arco de soldadura. Empíricamente, la influencia de la atmósfera del arco de

Estudio histórico-arqueológico de la muralla sureste de Arcos de la Frontera (Cádiz

Directory of Open Access Journals (Sweden)

Alonso-Ruiz, Manuel María

2013-12-01

Full Text Available Due to the project developed by the technicians of the Municipality of Arcos de la Frontera in order to restore the visible remains of the Medieval wall preserved in the southeastern area of this town, the authors of this paper conducted the archaeological excavation, drawing survey and study of this enclosure. As a result of these analysis have been identified eight constructive periods, grouped into three cycles. With the aim of obtaining a better understanding of this monument, these activities have been completed with the use of written sources, the urban fieldwork, the study of micro-toponymy, the analogy with other architectural elements and, to a lesser extent, with the information provided by the archaeological materials. The results of these analyses make possible to propose a reasonable hypothesis regarding the foundation of the wall and the relationship between its three southeastern gates. The conclusions mean an approach to the urban development of this area of Arcos de la Frontera from al-Andalus times until the late Modern Age.Con motivo del proyecto elaborado por los técnicos del Ayuntamiento de Arcos de la Frontera para la restauración del tramo de muralla medieval conservada en el sureste de esta localidad, los autores de este artículo realizaron la intervención arqueológica, documentación planimétrica y estudio de dicha cerca. Como resultado de estas actuaciones se han identificado ocho períodos edificatorios, agrupados en tres grandes ciclos. De cara a obtener una mayor comprensión del objeto de estudio, estas actuaciones se han completado con el recurso a las fuentes escritas, la prospección urbana, el estudio de la microtoponimia, la analogía con otros elementos arquitectónicos y, en menor medida, con la información aportada por los materiales arqueológicos. Los resultados de estos análisis permiten el planteamiento de una hipótesis razonable para la fundación de la muralla y la relación entre las tres

Substituição do arco aórtico sem parada circulatória total: técnicas, táticas e resultados Substitution of the aortic arch without total circulatory arrest: techniques, tactics and results

Directory of Open Access Journals (Sweden)

Fernando Antônio Roquette REIS FILHO

2001-09-01

Full Text Available INTRODUÇÃO: A despeito dos avanços da cirurgia cardiovascular, das técnicas de circulação extracorpórea e dos métodos de proteção cerebral, a mortalidade nas operações de substituição ou reparo do arco aórtico permanece elevada. As alterações decorrentes da hipotermia profunda e as lesões neurológicas ainda são a maior causa de morbi-mortalidade. OBJETIVO: Demonstrar um conjunto de técnicas e táticas cirúrgicas que permite realizar a substituição do arco aórtico sem a necessidade de hipotermia e parada circulatória total e apresentar os resultados alcançados em um grupo de 10 pacientes. CASUÍSTICA E MÉTODOS: Dez pacientes do sexo masculino, com idade média de 48,7 anos, foram submetidos a substituição do arco aórtico, utilizando-se hipotermia moderada, canulação arterial em artéria subclávia direita e femoral esquerda, perfusão cerebral seletiva pela artéria subclávia e confecção da anastomose dos vasos arco no primeiro tempo. RESULTADOS: O tempo médio de perfusão cerebral seletiva foi de 14,1 minutos, de isquemia miocárdica 39,6 minutos e de circulação extracorpórea 98,9 minutos. A temperatura esofágica média foi de 26,6º C (24º C a 30º C. O tempo médio de internação foi de 18,4 dias (8 a 40. Não ocorreram óbitos imediatos ou tardios. Dois pacientes apresentaram confusão mental temporária e um apresentou hemiparesia que foi revertida. CONCLUSÕES: A combinação de técnicas e táticas empregadas permitiu uma efetiva correção das lesões em um campo cirúrgico amplo e seco. Ofereceu uma excelente proteção cerebral sem a necessidade de hipotermia profunda o que diminuiu substancialmente as complicações pós-operatórias.INTRODUCTION: Despite the development in cardiovascular techniques such as in cardiopulmonary bypass and cerebral protection the mortality in the correlations of the diseases of the aortic arch remains high. Deep hypothermic circulatory arrest and cardiopulmonary

High speed machinability of the aerospace alloy AA7075 T6 under different cooling conditions

Science.gov (United States)

Imbrogno, Stano; Rinaldi, Sergio; Suarez, Asier Gurruchaga; Arrazola, Pedro J.; Umbrello, Domenico

2018-05-01

This paper describes the results of an experimental investigation aimed to st udy the machinability of AA7075 T6 (160 HV) for aerospace industry at high cutting speeds. The paper investigates the effects of different lubri-cooling strategies (cryogenic, M QL and dry) during high speed turning process on cutting forces, tool wear, chip morphology and cutting temperatures. The cutting speeds selected were 1000m/min, 1250m/min and 1500 m/min, while the feed rate values used were 0.1mm/rev and 0.3 mm/rev. The results of cryogenic and M QL application is compared with dry application. It was found that the cryogenic and M QL lubri-cooling techniques could represent a functional alternative to the common dry cutting application in order to implement a more effect ive high speed turning process. Higher cuttingparameters would be able to increase the productivity and reduce the production costs. The effects of the cutting parameters and on the variables object of study were investigated and the role of the different lubri-cooling conditions was assessed.

Reactive wetting of Ti-6Al-4V alloy by molten Al 4043 and 6061 alloys at 600-700 C

Energy Technology Data Exchange (ETDEWEB)

Lin, Qiaoli; Li, Fuxiang; Jin, Peng; Yu, Weiyuan [Lanzhou Univ. of Technology (China). State Key Lab. of Advanced Processing and Recycling of Non-ferrous Metal

2017-06-15

Wetting of Ti-6Al-4V alloy by two industrial grade Al alloys (i.e., Al 6061 and 4043 alloys) was studied using the sessile drop method at 600-700 C under high vacuum. Al/Ti-6Al-4V is a typical reactive wetting system with good final wettability accompanied by the formation of precursor film which is actually an extended reaction layer. The formation mechanism for the precursor film is ''subcutaneous infiltration''. The small amount of alloying element Si in the alloys can cause significant segregation at the liquid/solid interface which satisfies the thermodynamic condition. The wetting behavior can be described by the classic reaction product control models, and Ti{sub 7}Al{sub 5}Si{sub 12} decomposition and Al{sub 3}Ti formation correspond to the two spreading stages. The small difference in alloying elements in Al 6061 and 4043 resulted in distinctly different interface structures, formation of precursor film and spreading dynamics, especially for the Si segregation at the interface.

Metodologia de Baixo Custo para Registro de Imagens do Arco Voltaico de Soldagem

Directory of Open Access Journals (Sweden)

Anna Louise Voigt

2017-12-01

Full Text Available Resumo Equipamentos que permitem o registro de imagens são importantes ferramentas no estudo dos processos de soldagem. Contudo, câmeras de alta velocidade que permitem a captura de imagens do arco voltaico e dos fenômenos envolvidos, a exemplo da transferência metálica, são limitadas devido ao seu alto custo. Tendo em visto a utilização de câmeras de baixo custo relativo, o presente estudo tem por objetivo avaliar os efeitos dos parâmetros de exposição no registro do arco voltaico, sendo este, semelhante ao que se observa através da máscara de soldagem. Logo, analisou-se os efeitos da abertura do diafragma, tempo de exposição e sensibilidade ISO. Além destes parâmetros, foram empregados filtros na lente da câmera a fim de melhorar a qualidade das imagens. Por fim, aplicou-se o conhecimento adquirido no registro do processo TIG com alimentação de arame frio, sendo possível a visualização das gotas sendo transferidas bem como da poça de fusão.

Interfacial microstructure and mechanical property of Ti6Al4V/A6061 dissimilar joint by direct laser brazing without filler metal and groove

International Nuclear Information System (INIS)

Song, Zhihua; Nakata, Kazuhiro; Wu, Aiping; Liao, Jinsun

2013-01-01

Laser brazing of Ti6Al4V and A6061-T6 alloys with 2 mm thickness was conducted by focusing laser beam on aluminum alloy side, and the effect of laser offset distance on microstructure and mechanical properties of the dissimilar butt joint was investigated. Laser offset has a great influence on the thickness of interfacial intermetallic compound (IMC) layer and the mechanical property of joint. The thickness of interfacial IMC layer is less than 500 nm, and the average tensile strength of the joint reaches 64% of aluminum base material strength, when suitable welding conditions are used. The interfacial IMC is TiAl 3 . The formation of interfacial IMC layer and its effect on mechanical property of the joint are discussed in the present study.

Efecto de la presión de C2H2 sobre las propiedades tribológicas y mecánicas de recubrimientos de CrC depositados por evaporación por arco catódico (EAC

Directory of Open Access Journals (Sweden)

Maryory Astrid Gómez Botero

2010-01-01

Full Text Available Se obtuvieron recubrimientos monocapa de CrC por evaporación por arco catódico (EAC. Se investigaron las propiedades tribológicas de los recubrimientos mediante pruebas de deslizamiento en seco usando un tribómetro de bola sobre disco. Las propiedades mecánicas se estudiaron por nanoindentación dinámica. Los valores de los coeficientes de fricción de los recubrimientos monocapa de CrC mostraron buena correlación con el contenido de carbono de estos recubrimientos, presentando el más bajo coeficiente de fricción el recubrimiento con el mayor contenido de carbono. Después de las pruebas de fricción, tanto los recubrimientos como las esferas de acero usadas como contracuerpos presentaron partículas de desgaste de color marrón que sugieren la presencia de productos de reacciones triboquímicas. Las mejores propiedades mecánicas fueron obtenidas para los recubrimientos CrC con el más bajo contenido de carbono.

Modelos de horno de arco eléctrico para estudios del efecto flicker

Directory of Open Access Journals (Sweden)

Catalina González Castaño

2016-06-01

Full Text Available Objetivo: El objetivo de este artículo es evaluar las fluctuaciones de voltaje o flicker de dos modelos de un horno de arco eléctrico a través de la comparación con datos reales. Método: El primer modelo se fundamenta a partir del principio de conservación de la energía, de la cual se obtiene una ecuación diferencial no lineal que captura la característica voltaje – corriente del arco eléctrico. Las fluctuaciones de voltaje se generan con un circuito de caos que modula la amplitud del voltaje del arco eléctrico. El segundo modelo está basado en las relaciones empíricas entre la longitud de arco, la tensión y la corriente a través del arco. Las fluctuaciones de voltaje se obtienen agregando una señal aleatoria a la longitud del arco eléctrico. Ambos modelos son implementados en PSCADTM. Resultados: Los resultados de ambos modelos son comparados con mediciones reales tomadas en la etapa más crítica de la operación del horno, y muestran que el modelo basado en la conservación de la potencia presenta un menor error medio cuadrático promedio en los voltajes y corrientes de 5,6 V y 1.7 kA frente a 27,2 V y 3.38 kA obtenidos con el segundo modelo. Conclusiones: Ambos modelos consideran la no linealidad y comportamiento aleatorio que exhibe este tipo de carga, validando su inclusión en modelos computacionales de sistemas eléctricos de potencia.

Tratamiento de enfermedad de aorta torácica con afectación de troncos supraaórticos usando técnica combinada de cirugía convencional y tratamiento endovascular

Directory of Open Access Journals (Sweden)

Antonio Jiménez Aceituno

2007-04-01

Conclusiones: El abordaje del arco aórtico usando técnicas endovasculares presenta el problema de la oclusión de TSA. El uso de derivaciones quirúrgicas hace posible esto. El abordaje combinado es aún una técnica nueva pero que podría ser una alternativa válida a la cirugía abierta de arco y aorta torácica descendente. Nuestra experiencia es satisfactoria, aunque no concluyente por tratarse sólo de dos casos.

Effects of ZrB{sub 2} on substructure and wear properties of laser melted in situ ZrB{sub 2p}/6061Al composites

Energy Technology Data Exchange (ETDEWEB)

Zeng, Yida [School of Material Science and Engineering, Tianjin University, Tianjin 300072 (China); State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001 (China); Chao, Yuhjin [School of Material Science and Engineering, Tianjin University, Tianjin 300072 (China); Department of Mechanical Engineering, University of South Carolina, Columbia, SC 29208 (United States); Luo, Zhen, E-mail: lz@tju.edu.cn [School of Material Science and Engineering, Tianjin University, Tianjin 300072 (China); State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001 (China); Cai, Yangchuan [School of Material Science and Engineering, Tianjin University, Tianjin 300072 (China); State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001 (China); Huang, Yongxian [State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001 (China)

2016-03-01

Graphical abstract: - Highlights: • Laser beam partly disperses ZrB{sub 2} particle clusters and showing dispersed particles state after matrix solidification. • Laser melting process narrower cellular spacing in composites than AA6061 matrix. • Compared with matrix alloy, crystal orientation near melted layer edge of the composites is almost random duo to heterogeneous nucleation in melt and pinning effect of laser dispersed ZrB{sub 2} nanoparticles at solidification front. • Laser melted layer shows better wear properties than matrix and composite without laser melting. - Abstract: Aluminum matrix composites reinforced by in situ ZrB{sub 2} particles were successfully fabricated from an Al-KBF{sub 4}-K{sub 2}ZrF{sub 6} system via a direct melt reaction. A laser surface melting strategy is used to improve the surface strength of the in situ ZrB{sub 2p}/6061Al composite, which includes a series of laser-melted composites with different laser power processed by a 2 kW YAG laser generator. XRD and EDS results demonstrated the existence of ZrB{sub 2} nanoparticles in the composite. After laser melting, the penetration depth of the molten pool increases with increasing power density. OM and SEM analysis indicate that the laser melting process yields narrower cellular spacing of the matrix and partly disperses the ZrB{sub 2} particle clusters. Compared with laser-melted matrix alloys, the crystal orientations near the melted layers edge of the composite are almost random due to heterogeneous nucleation in the melt and the pinning effect of laser-dispersed ZrB{sub 2} nanoparticles at the solidification front. Wear test results show that the laser melted layer performs better at wear resistance than both the substrate and the matrix AA6061 by measuring wear mass loss. Compared with composite samples prepared without laser melting, the wear mass loss of the laser melted composites decreased from 61 to 56 mg under a load of 98 N for 60 min.

SIMULACIÓN MEDIANTE REDES NEURONALES DEL ENFRIAMIENTO DEL ARCO ELÉCTRICO EN DISYUNTORES DE ALTA TENSIÓN

Directory of Open Access Journals (Sweden)

ALEXANDRO BRYANTSEVICH

2010-07-01

Full Text Available La formulación de los modelos analíticos de enfriamiento de los arcos eléctricos en disyuntores de alta tensión todavía presenta muchas dificultades, y requiere nuevas hipótesis que los simplifique sustancialmente en relación con la realidad. Desde un punto de vista técnico, la aplicación de las redes neuronales podría ser una fuente objetiva para la simulación del enfriamiento del arco eléctrico, y para obtener resultados más cercanos a las propiedades reales del interruptor. En este trabajo se describe la problemática del desarrollo de modelos analíticos vinculados al enfriamiento del arco eléctrico de disyuntores de alta tensión mediante redes neuronales.

Resistencia a la corrosión en ambiente salino de un acero al carbono recubierto con aluminio por rociado térmico y pintura poli aspártica

Directory of Open Access Journals (Sweden)

José Luddey Marulanda Arévalo

2017-06-01

Full Text Available Se evaluó la resistencia a la corrosión en ambiente salino del acero 1020 recubierto con aluminio por medio de rociado térmico por arco eléctrico y después se aplicó una pintura poliaspártica. Se observó que este sistema presenta una protección en estos ambientes, reduciendo la velocidad de corrosión, en comparación con un sistema de pintura bicapa, el cual consistía en una capa rica en zinc y otra capa de pintura poliaspártica. Se realizó la caracterización del recubrimiento por medio de Microscopía Electrónica de Barrido (MEB para analizar su comportamiento con respecto al sustrato y a la pintura para conocer variaciones en propiedades como adherencia, topografía y homogeneidad. Se observó que las probetas recubiertas con aluminio por rociado térmico presentan una mayor resistencia a la corrosión en cámara salina que las probetas que no fueron recubiertas y solo estaban protegidas por el sistema bicapa de pintura, aunque la pintura sin rociado térmico tuvo un buen desempeño ya que no falló durante el tiempo estipulado para en ensayo en cámara de niebla salina.

ARCO moves to spark U.S. activity, spread risk

International Nuclear Information System (INIS)

Petzet, G.A.

1992-01-01

This paper reports that one US major oil company has taken the offensive to combat tightness of drilling capital in the US and the overseas flight of interest in elephant hunting. ARCO Oil and Gas Co., with substantial acreage and seismic data covering most of the US Lower 48 states, s communicating with a broad audience to try to make activity happen on its properties. ARCO is looking to bring others in on its prospects, hawk seismic data, and take deals from others. On some acreage that internal funds are not available to evaluate, ARCO was offering 100% farmounts

Pulmón del soldador de arco Arc welder's lung

Directory of Open Access Journals (Sweden)

Luciana Molinari

2010-12-01

Full Text Available La siderosis del soldador o neumoconiosis siderótica fue descripta por Doig y McLaughlin en 1936 como una enfermedad pulmonar causada por la inhalación crónica de polvo de hierro en soldadores de arco eléctrico. Presentamos un caso de siderosis del soldador asociada a aumento de los niveles de ferritina, sin hallazgo de depósito de hierro en otros órganos y sin causas evidentes de hemosiderosis secundaria.Pneumoconiosis of electric arc welder or siderotic pneumoconiosis was described by Doig and McLaughlin in 1936 as a lung disease caused by chronic inhalation of iron fumes in electric arc welders. We present a case report of electric arc welder siderosis associated with high levels of ferritin, without findings of iron deposit in any other organ.

Effects of high thermal neutron fluences on Type 6061 aluminum

International Nuclear Information System (INIS)

Weeks, J.R.; Czajkowski, C.J.; Farrell, K.

1992-01-01

The control rod drive follower tubes of the High Flux Beam Reactor are contructed from precipitation-hardened 6061-T6 aluminum alloy and they operate in the high thermal neutron flux regions of the core. It is shown that large thermal neutron fluences up to ∼4 x 10 23 n/cm 2 at 333K cause large increases in tensile strength and relatively modest decreases in tensile elongation while significantly reducing the notch impact toughness at room temperature. These changes are attributed to the development of a fine distribution of precipitates of amorphous silicon of which about 8% is produced radiogenically. A proposed role of thermal-to-fast flux ratio is discussed

How Alan Hirsig plans to play Arco chemical's strong hand

International Nuclear Information System (INIS)

Hunter, D.

1993-01-01

With 1992 net income up 4%, to $195 million. Arco Chemical (Newtown Square, PA) held its own in a year when many of its petrochemical industry peers were mauled again. Arco Chemical president and CEO Alan R. Hirsig talked recently with CW about his growth strategies for the company, and about progress with his Manufacturing Excellence initiative, lauched in the wake of the 1990 Channelview, TX tragedy. Riding on faster growth in the Asia region, Hirsig expects to see Arco's regional sales mix shift in the next three years and sales to grow from 1992's $3.1 billion to $4 billion/year. The foundation for that growth continues to be Arco's core proprietary technology competence for making propylene oxide (PO) with coproduction and tert-butyl alcohol (TBA) - the key methyl tert-butyl ether (MTBE) feedstock, or styrene monomer. Arco claims a 28% share of world MTBE capacity, its 78,500-bbl/day capacity. He cites Jakarta, Bangkok, Mexico City, Milan, Turin, and Athens as examples of major cities where MTBE use in reformulated fuels is getting interest. Given what he views as Europe's traditional 10-year lag on the US in areas like catalytic mufflers and unleaded gasoline, he sees significant prospects in reformulated gasoline in that region in the coming years. Arco is also testing a proprietary TBA-based hydroperoxide in diesel fuels, which improves the cetane number and cleans up exhaust emissions, winning great interest in Tokyo. Also in the fuels area, Hirsig notes interest in ethyl tert-butyl ether production - which Arco launched in the US in December on a commercial scale - in France

Rosa em policromia: cores, eros e íris (um arco de sexualidade entre Magma e Grande sertão: veredas

Directory of Open Access Journals (Sweden)

Wilberth Clayton Ferreira Salgueiro

2005-10-01

Full Text Available Numa  passagem de Grande sertão: veredas,  Riobaldo fala de uma "sonhice" que teve: "Diadorim  passando por debaixo do a rco-íris". Vinte anos antes,  em Magma,  Rosa esc reveu  um con junto de sete poemas, cujos  títu los  denunciam  a presen ça do arco-íris  e ativam sentidos que tal fenômeno carrega. Entender alguns destes sentidos, mostrando como as cores funcionam  na vida e na lite ratura, é o que quer o prese nte artigo. Para isso, analisam-se o poema "Ve rmelho" e a referida passagem-sonho como indicadores de um pensamento sobre a sexualidade.

Pengaruh Rapat Arus Anodizing terhadap Nilai Kekerasan pada Plat Aluminium Paduan Aa Seri 2024-t3

OpenAIRE

Fajar Nugroho

2015-01-01

Aluminum alloy AA 2024-T3 is widely applied in the aircraft industry because it has good mechanical properties such as; light weight, good conductivity and the corrosion resistance. However Aluminium 2024-T3 susceptible to wearing. One method to improve the wear resistance o f AA 2024-T3 is the anodizing process. The aims of this research to study the effect of current density and anodizing time against the hardness of aluminum alloy AA 2024-T3. The process of anodizing was carried out using ...

Recubrimientos decorativos de Ti, TiN y TiO2 sobre vidrio, depositados en vacío mediante pulverización por arco eléctrico

Directory of Open Access Journals (Sweden)

Straumal, B.

2001-04-01

Full Text Available In a vacuum arc discharge, highly ionised species are formed, which permits an effective control of the deposition process and, particularly, to deposit Ti, TiN and TiO2 coatings on non-conducting materials like glass. Moreover, this technique allows us to position a mask between the substrates and the sheets to be coated. Another advantage of the vacuum arc technology is the low substrate temperature during the deposition. Data on the roughness, composition and corrosion resistance in architectural glass mask-coated with titanium nitride and oxide are presented and analysed in this work. A comparative analysis is made with reactive direct current sputtering and plasma enhanced chemical vapour deposition techniques.La técnica de pulverización por arco eléctrico en vacío permite un control eficaz del proceso de deposición, ya que la temperatura del sustrato permanece baja durante dicho proceso. Además, mediante esta técnica pueden llevarse a cabo recubrimientos sobre superficies no conductoras y resulta posible la utilización de máscaras de plástico, colocadas entre la fuente y el sustrato a recubrir. En este trabajo se han llevado a cabo recubrimientos de Ti, TiN y TiO2 sobre vidrio arquitectónico. Los recubrimientos se han realizado con y sin dibujos, aplicados a través de máscaras. Se han estudiado algunas características de estos recubrimientos, como son la rugosidad, composición y resistencia contra la corrosión. Los análisis se han llevado a cabo mediante técnicas de microscopía de fuerza atómica, espectroscopía Auger y ensayos electroquímicos. Finalmente, se ha realizado un análisis comparativo con resultados obtenidos mediante otras técnicas de deposición.

Gas tungsten arc welding assisted hybrid friction stir welding of dissimilar materials Al6061-T6 aluminum alloy and STS304 stainless steel

International Nuclear Information System (INIS)

Bang, HanSur; Bang, HeeSeon; Jeon, GeunHong; Oh, IkHyun; Ro, ChanSeung

2012-01-01

Highlights: ► GTAW assisted hybrid friction stir welding (HFSW) has been carried out for dissimilar butt joint. ► Mechanical strength of dissimilar butt joint by HFSW and FSW has been investigated and compared. ► Microstructure of dissimilar butt joint by HFSW and FSW has been investigated and compared. -- Abstract: The aim of this research is to evaluate the potential for using the gas tungsten arc welding (GTAW) assisted hybrid friction stir welding (HFSW) process to join a stainless steel alloy (STS304) to an aluminum alloy (Al6061) in order to improve the weld strength. The difference in mechanical and microstructural characteristics of dissimilar joint by friction stir welding (FSW) and HFSW has been investigated and compared. Transverse tensile strength of approximately 93% of the aluminum alloy (Al6061) base metal tensile strength is obtained with HFSW, which is higher than the tensile strength of FSW welds. This may be due to the enhanced material plastic flow and partial annealing effect in dissimilar materials due to preheating of stainless steel surface by GTAW, resulting in significantly increased elongation of welds. The results indicate that HFSW that integrates GTAW preheating to FSW is advantageous in joining dissimilar combinations compared to conventional FSW.

The speciation of Si and other alloying elements in the oxide surface film of galvanically corroded weld fusion zone of laser welded AA6061 aluminium alloy

Energy Technology Data Exchange (ETDEWEB)

Mujibur Rahman, A.B.M.; Kumar, Sunil [Ian Wark Research Institute, University of South Australia, Mawson Lakes Campus, Mawson Lakes, South Australia 5095 (Australia); Gerson, Andrea R. [Applied Centre for Structural and Synchrotron Studies, University of South Australia, Mawson Lakes Campus, Mawson Lakes, South Australia 5095 (Australia)], E-mail: Andrea.Gerson@unisa.edu.au

2008-05-15

It has recently been proposed that on galvanic corrosion of laser weldments of AA6061 aluminium alloy the temporal increase in galvanic corrosion resulted from either the build up of intermetallic phases in the surface oxide layer and/or a significant increase in the surface area of the cathodic weld fusion zone due to the porous nature of the surface layer. This proposition has motivated a comprehensive surface analytical study of the incorporation of alloying elements into the oxide surface film, which is composed predominately of alumina. Si is found to be present as silicate and silicides. The Gibbs free energy of formation, per cation, of silicate is more negative than that for alumina and hence silicate formation is thermodynamically, relatively, favourable. In contrast the Gibbs free energy for oxide formation, per cation, for the other alloying elements is less negative and hence relatively unfavourable compared to the formation of alumina. We propose therefore that Fe, Cu and Cr are present in the metallic form, possibly as silicides, within the oxide surface layer. Magnesium is found to be depleted relative to the weld fusion zone presumably due to dissolution within the electrolyte.

The speciation of Si and other alloying elements in the oxide surface film of galvanically corroded weld fusion zone of laser welded AA6061 aluminium alloy

International Nuclear Information System (INIS)

Mujibur Rahman, A.B.M.; Kumar, Sunil; Gerson, Andrea R.

2008-01-01

It has recently been proposed that on galvanic corrosion of laser weldments of AA6061 aluminium alloy the temporal increase in galvanic corrosion resulted from either the build up of intermetallic phases in the surface oxide layer and/or a significant increase in the surface area of the cathodic weld fusion zone due to the porous nature of the surface layer. This proposition has motivated a comprehensive surface analytical study of the incorporation of alloying elements into the oxide surface film, which is composed predominately of alumina. Si is found to be present as silicate and silicides. The Gibbs free energy of formation, per cation, of silicate is more negative than that for alumina and hence silicate formation is thermodynamically, relatively, favourable. In contrast the Gibbs free energy for oxide formation, per cation, for the other alloying elements is less negative and hence relatively unfavourable compared to the formation of alumina. We propose therefore that Fe, Cu and Cr are present in the metallic form, possibly as silicides, within the oxide surface layer. Magnesium is found to be depleted relative to the weld fusion zone presumably due to dissolution within the electrolyte

Utilización del software ArcoTSAM para el aprendizaje del comportamiento de las estructuras de fábrica = Using ArcoTSAM software as a learning tool in behavior of masonry structures

Directory of Open Access Journals (Sweden)

Fernando Magdalena Layos

2017-08-01

Full Text Available El aprendizaje del comportamiento mecánico de las estructuras de fábrica presenta ciertas dificultades. El conocimiento que subyace al estudio de las estructuras está condicionado por el uso casi exclusivo en su construcción en los últimos cien años de hormigón armado y acero. Los modelos habitualmente utilizados para analizar estas tipologías de estructuras no son aplicables a las construcciones de fábrica. Por ello, al comenzar a estudiar las fábricas hay una dificultad inicial que consiste en reconocer que se trata de una tipología de estructura diferente, y que para su comprensión hay que valerse de herramientas distintas a las que se utilizan habitualmente en la práctica profesional contemporánea. El programa ArcoTSAM que se presenta en este trabajo ha sido realizado por profesores del actual departamento de Estructuras y Física de Edificación (DEFE, de la Escuela Técnica Superior de Arquitectura de Madrid (ETSAM y es una herramienta que permite el análisis de estructuras de fábrica consideradas como agregados de bloques rígidos. Se trata de varios conjuntos de bibliotecas escritas en el lenguaje de programación de Maple. En este trabajo se muestra cómo la herramienta ArcoTSAM puede utilizarse para facilitar el aprendizaje del comportamiento de las estructuras de fábrica en cursos de grado o de máster, además de servir como herramienta de investigación. Abstract The Learning of the behavior of masonry structures have some difficulties. The tools usually applied are based in the knowledge acquired in last hundred years in the use of reinforced concrete and steel in structures. This way of proceeding cannot be used in the study of masonry structures. For this reason, when the study of masonry structures begins, students use to have an initial difficulty that consist in recognizing that masonry is a different kind of structure with a different behavior and other tools are needed in order to understand them. Arco

DESGASTE POR ABRASIÓN DEL ACERO API 5L X65 REVESTIDO CON NIOBIO POR ASPERSIÓN TÉRMICA A PLASMA Y CON INCONEL 625 POR SOLDADURA

Directory of Open Access Journals (Sweden)

JOSE MATOS

2012-01-01

Full Text Available El objetivo de este trabajo fue evaluar y caracterizar el comportamiento mecánico en desgaste del acero API 5L X65, revestido con niobio en comparación al desempeño del revestimiento de la aleación de inconel 625 empleados en la industria de petróleo y gas. El revestimiento de niobio fue obtenido por el proceso de aspersión térmica a plasma de arco no transferido y el revestimiento inconel 625 por soldadura con electrodo revestido. La resistencia al desgaste por abrasión fue evaluada según la norma Petrobras N-2568, en un tribómetro CTER, la rugosidad y el volumen de material desgastado se determinó a través de perfilometría y la dureza de los revestimientos por microscopia Vickers. Los revestimientos obtenidos fueron caracterizados respecto a su morfología por microscopia electrónica de barrido (MEB y microscopía óptica (MO. La mayor dureza del revestimiento con niobio obtenido puede haber contribuido a reducir la tasa de desgaste en comparación con el revestimiento de inconel 625.

Phosphated in aluminium 6061-T651 used in the pool of the TRIGA Mark III nuclear reactor

International Nuclear Information System (INIS)

Aguilar H, F.; Espinosa L, J.; Pena B, A.; Perez F, C.; Sanchez C, M.; Vite T, M.; Vite T, J.

2001-01-01

We characterized a phosphated coating used a substrate in aluminium 6061-T651, which is used in the container of the TRIGA Mark III nuclear reactor. Characterization was made using MEB and X-ray diffraction techniques. Coating application has the function to prevent the corrosion. Coating was probed to test adhesion in accordance with the Standard ASTM D-4541, and the corrosion process using a salt spray (fog) camera, in accordance with the Standard ASTM B-117, so as we could phosphate the welding cord. These experiences were obtained using a Deep cell. Results obtained are going to phosphate 'in situ' using a mobile device which was patented for the National Institute of Nuclear Research (ININ) in the Mexican Institute of Intellectual Property (INPI). (Author)

Análisis de la influencia del tratamiento térmico de envejecimiento en la modificación de las propiedades mecánicas de la aleación AA6060 procesada por ECAE

Directory of Open Access Journals (Sweden)

Pérez, I.

2011-02-01

Full Text Available In the present work, a study on the modification of the mechanical properties of the aluminium alloy AA6060 F has been made when severe plastic deformation is applied to it through Equal Channel Angular Extrusion (ECAE. Moreover, a study about the effect of the artificial aging on the modification of such mechanical properties has been carried out after having processed the material by ECAE. In order to do this, thermal treatments at different values of temperature and holding time have been performed. Hardness, tensile tests and Charpy impact test, along with metallographic techniques, have been carried out in order to analyse the mechanical behaviour and the state of the material. In spite of the existence of several studies that have analysed the effect of aging thermal treatments on 6000 aluminium alloys, such studies are focused on laboratory alloys with industrial compositions not very usual. Therefore, in the present work, the employed starting material is a commercial alloy as-cast, which has not been studied up to now.

En el presente trabajo se ha realizado un estudio de la modificación de las propiedades mecánicas de la aleación de aluminio AA6060 F, al ser deformada mediante deformación plástica severa empleando el proceso de extrusión en canal angular (ECAE. Asimismo, se ha efectuado un estudio del efecto del envejecimiento artificial sobre la modificación de dichas propiedades mecánicas. Para ello, se han realizado tratamientos térmicos a diferentes temperaturas y tiempos de permanencia, efectuando mediciones de dureza, ensayos de tracción, ensayos con péndulo Charpy y técnicas de revelado metalográfico, para conocer los comportamientos mecánicos y el estado del material. Existe un elevado número de publicaciones, que han analizado el efecto de tratamientos térmicos de envejecimiento en aleaciones de la serie 6000. Sin embargo, la aleación AA6060 no ha sido tan ampliamente estudiada. Por ello, en este trabajo

Efecto en la microestructura y en la resistencia a la corrosión bajo tensión del calentamiento producido por la soldadura en la aleación AA7028

Directory of Open Access Journals (Sweden)

Calatayud, A.

1997-02-01

Full Text Available The microstructural and stress corrosion cracking changes due to welding are studied for the AA7028 aluminium alloy. Special attention is paid to the characterization of what is known as the "white zone". The influence of the delay step between quenching and aging in a T73 treatment on the microstructure and on the characteristics of the heat-affected zone (HAZ is also studied. Finally, the effect of thermal treatments applied on this zone after the welding is analyzed.

Se estudian los cambios en la microestructura y en la resistencia a la corrosión bajo tensión que sufre el material base (aleación de aluminio AA7028, debido a la soldadura. Se presta especial atención a la caracterización de la denominada "zona blanca". También se estudia la influencia que sobre la microestructura y las características de la zona afectada por el calor (ZAC tiene el tiempo de espera entre el temple y el envejecimiento en un T73. Y por último, se analiza el efecto que sobre dicha zona tiene la aplicación de tratamientos térmicos posteriores al proceso de soldeo.

The ARCO 1 megawatt Photovoltaic Power Plant

Science.gov (United States)

Rhodes, G. W.; Reilly, M. R.

The world's largest Photovoltaic Power Plant is in operation and meeting performance specifications on the Southern California Edison (SCE) grid near Hesperia, California. The 1 MW plant designed and constructed by The BDM Corporation, for ARCO Solar Inc., occupies a 20 acre site adjacent to the SCE Lugo substation. The entire design and construction process took 7 1/2 months and was not only on schedule but below budget. Because of its vast photovoltaic experience, BDM was chosen over several engineering firms to perform this complex job. We were provided a conceptual design from ARCO which we quickly refined and immediately initiated construction.

Optimización de los Parámetros de Soldadura por Arco Sumergido en Acero HSLA: una Aplicación para Manufactura de Tuberías de Conducción de Hidrocarburos

OpenAIRE

Costa,Patricia Sheilla; Reyes-Valdés,Felipe Arturo; Saldaña-Garcés,Rocio; González-González,David Salvador; Delgado-Albavera,Erick Rafael

2015-01-01

Resumen El acero HSLA (High Strength Low Alloy) API 5L X70 es utilizado para fabricación de tuberías para transporte de hidrocarburos. La construcción de tuberías de este material involucra alta cantidad de soldadura, donde los parámetros empleados influyen directamente en las estructuras metalúrgicas y en las propiedades mecánicas del mismo cuando soldado. Así, para estudiar el impacto de los parámetros de soldadura por arco sumergido en la resistencia mecánica y dureza de la Zona Afectada p...

Influence of volume percentage of NanoTiB2 particles on tribological & mechanical behaviour of 6061-T6 Al alloy nano-surface composite layer prepared via friction stir process

Directory of Open Access Journals (Sweden)

V. Kishan

2017-02-01

Full Text Available The aim of present study is to analyze the influence of volume percentage (vol.% of nano-sized particles (TiB2: average size is 35 nm on microstructure, mechanical and tribological behavior of 6061-T6 Al alloy surface nano composite prepared via Friction stir process (FSP. The microstructure of the fabricated surface nanocomposites is examined using optical microscopy (OM and scanning electron microscope (SEM for distribution of TiB2 nano reinforcement particles, thickness of nano composite layer formed on the Aluminum alloy substrate and fracture features. The depth of surface nano composite layer is measured as 3683.82 μm along the cross section of stir zone of nano composite perpendicular to FSP. It was observed that increase in volume percentage of TiB2 particles, the microhardness is increased up to 132 Hv and it is greater than as-received Al alloy's microhardness (104 Hv. It is also observed that at 4 volume percentage higher tensile properties exhibited as compared with the 2 and 8 vol. %. It is found that high wear resistance exhibited at 4 volume percentage as-compared with the 2 and 8 vol. %. The observed wear and mechanical properties are interrelated with microstructure, fractography and worn morphology.

Depósitos de escarnitos mineralizados em ferro e cobre do arco magmático de Santa Quitéria, Ceará, Provincia Borborema do nordeste do Brasil

Directory of Open Access Journals (Sweden)

Clovis Vaz Parente

Full Text Available Resumo Depósitos de escarnitos mineralizados em W-Mo da Província Borborema são conhecidos desde os anos 40. Entretanto, até a execução deste trabalho, não se tinha registros desses depósitos mineralizados em Fe-Cu. No Ceará, as primeiras ocorrências e/ou depósitos de escarnitos ricos em ferro e cobre foram identificadas recentemente no Arco Magmático Continental de Santa Quitéria, considerado produto de evolução de vários arcos magmáticos, variando de arco juvenil (870 - 800 Ma a colisão continental (625 - 600 Ma. Os escarnitos estão associados às rochas calcissilicáticas e mármores dolomíticos e/ou calcíticos, recortadas por quartzo monzonitos neoproterozóicos cedo a tardi-colisionais. São encontrados todos os tipos do sistema escarnítico como endoescarnitos, hornfels, escarnóides e exoescarnitos. Os exoescarnitos apresentam duas associações minerais, que refletem protólitos carbonáticos distintos: uma composta por clinopiroxênio-granada (estágio progradante e magnetita-pirrotita-calcopirita-pirita-biotita (estágio retrogradante, característica de protólito calcítico, e outra formada por olivina-espinélio-diopsidio na fase progradante e serpentina na fase retrogradante, representativa de protólito dolomítico. As granadas, em parte zonadas, exibem composição dominada por andradita (82 - 52 mol%, seguida por grossularita (16 - 45mol% e, em proporção menor, piropo (2 - 3 mol%. O piroxênio do protólito calcítico é típico da série diopsídio-hedenbergita, com composição média Diopsídio46Hedenbergita52Johannsenita2. Três tipos de minério magnetítico são encontrados: i magnetito bandado; ii magnetito disseminado; iii magnetito maciço filoneano. Ocorre ainda um minério sulfetado de cobre com e sem magnetita associado, e blocos de gossans. Os dados geológicos e metalogenéticos obtidos indicam que a gênese destes escarnitos está associada à influência dos granitos monzoníticos tardi

Interactions between the APOA5 -1131T>C and the FEN1 10154G>T polymorphisms on ω6 polyunsaturated fatty acids in serum phospholipids and coronary artery disease

Science.gov (United States)

Park, Ju Yeon; Paik, Jean Kyung; Kim, Oh Yoen; Chae, Jey Sook; Jang, Yangsoo; Lee, Jong Ho

2010-01-01

We determined the contribution of the combination of FEN1 10154G>T with the most significant association in the analysis of plasma arachidonic acid (AA, 20:4ω6) and the APOA5-1131T>C on phospholipid ω6PUFA and coronary artery disease (CAD). Patients with CAD (n = 807, 27–81 years of age) and healthy controls (n = 1123) were genotyped for FEN1 10154G>T and APOA5-1131T>C. We found a significant interaction between these two genes for CAD risk (P = 0.007) adjusted for confounding factors. APOA5-1131C allele carriers had a higher CAD risk [odds ratio (OR):1.484, 95% confidence interval (CI):1.31–1.96; P = 0.005] compared with APOA5-1131TT individuals in the FEN1 10154GG genotype group but not in the FEN1 10154T allele group (OR:1.096, 95%CI:0.84–1.43; P = 0.504). Significant interactions between these two genes were also observed for the AA proportion (P = 0.04) and the ratio of AA/linoleic acid (LA, 18:2ω6) (P = 0.004) in serum phospholipids of controls. The APOA5-1131C allele was associated with lower AA (P = 0.027) and AA/LA (P = 0.014) only in controls carrying the FEN1 10154T allele. In conclusion, the interaction between these genes suggests that the FEN1 10154T variant allele decreases AA and AA/LA in the serum phospholipids of carriers of the APOA5-1131C allele, but contributes no significant increase in CAD risk for this population subset despite their increased triglylcerides and decreased apoA5. PMID:20802161

Compressive strength, plastic flow properties, and surface frictional effects of 1100, 3003 and 6061 aluminum alloys

Energy Technology Data Exchange (ETDEWEB)

Pinkerton, Gary Wayne [Univ. of Illinois, Urbana-Champaign, IL (United States)

1993-01-01

The purpose of this study is to find aluminum alloys that are effective for use as wire vacuum seals in the 800MeV particle accelerator located at the Louis Anderson Meson Physics Facility (LAMPF) in Los Alamos, NM. Three alloys, Al 1100, Al 3003, and Al 6061, are investigated under uniaxial compression to determine stresses for a given height reduction from 0 to 70 percent, and to find plastic flow and surface interaction effects. Right-circular cylindrical specimens are compressed on-end (cylindrically) and radially (for modeling as compressed wire). Aluminum 1100 and 3003 alloys are compared for length to diameter ratios of 1 and 2 for both compression types, and are then compared to results of radial compression of annealed small diameter Al 1100 wire currently used at LAMPE. The specimens are also compressed between three different platen surfaces, polished steel, etched steel, and aluminum 6061-T6, to determine effects of friction. The Al 3003 alloy exhibits 20 to 25% lower stresses at all height reductions than Al 1100 for both cylindrical and radial compression.

Compressive strength, plastic flow properties, and surface frictional effects of 1100, 3003 and 6061 aluminum alloys

International Nuclear Information System (INIS)

Pinkerton, G.W.

1993-01-01

The purpose of this study is to find aluminum alloys that are effective for use as wire vacuum seals in the 800MeV particle accelerator located at the Louis Anderson Meson Physics Facility (LAMPF) in Los Alamos, NM. Three alloys, Al 1100, Al 3003, and Al 6061, are investigated under uniaxial compression to determine stresses for a given height reduction from 0 to 70 percent, and to find plastic flow and surface interaction effects. Right-circular cylindrical specimens are compressed on-end (cylindrically) and radially (for modeling as compressed wire). Aluminum 1100 and 3003 alloys are compared for length to diameter ratios of 1 and 2 for both compression types, and are then compared to results of radial compression of annealed small diameter Al 1100 wire currently used at LAMPE. The specimens are also compressed between three different platen surfaces, polished steel, etched steel, and aluminum 6061-T6, to determine effects of friction. The Al 3003 alloy exhibits 20 to 25% lower stresses at all height reductions than Al 1100 for both cylindrical and radial compression

Liga NiCrSiBC: Microestrutura e Dureza de Revestimentos Processados a Arco e a Laser

Directory of Open Access Journals (Sweden)

Leandro J. da Silva

2015-03-01

Full Text Available A técnica de processamento é determinante sobre características de um revestimento. Isso porque o aporte térmico, que depende da técnica e dos parâmetros, tem influência sobre a diluição e a taxa de solidificação. Em ligas com baixa complexidade metalúrgica, o impacto do processamento com técnicas de deposição que impõem maior taxa de resfriamento podem se traduzir em refino da microestrutura. Espera-se que quanto mais refinada a microestrutura maior a resistência mecânica do revestimento. Entretanto, na deposição de ligas de maior complexidade metalúrgica isso nem sempre ocorre, porque a elevada taxa de resfriamento pode suprimir formação/precipitação de fases responsáveis pela resistência. Neste estudo, a influência do processamento sobre microestrutura e dureza de revestimentos da liga Colmonoy-6® foi avaliada. A liga foi processada por plasma com arco transferido (PTA e laser de diodo de alta potência (HPDL sobre chapas de AISI 304 com dois níveis de diluição. Em ambos os casos, revestimentos de boa qualidade e livres defeitos foram obtidos. O aumento do teor de Fe (diluição e as diferentes taxas de resfriamento decorrem do processamento com diferentes parâmetros e técnicas. Em consequência, ocorrem mudanças significativas na microestrutura e na dureza dos revestimentos que estão associadas à distribuição, morfologia e composição química dos carbonetos e, principalmente, dos boretos.

High-Speed Friction Stir Welding of AA7075-T6 Sheet: Microstructure, Mechanical Properties, Micro-texture, and Thermal History

Science.gov (United States)

Zhang, Jingyi; Upadhyay, Piyush; Hovanski, Yuri; Field, David P.

2018-01-01

Friction stir welding (FSW) is a cost-effective and high-quality joining process for aluminum alloys (especially heat-treatable alloys) that is historically operated at lower joining speeds (up to hundreds of millimeters per minute). In this study, we present a microstructural analysis of friction stir welded AA7075-T6 blanks with high welding speeds up to 3 M/min. Textures, microstructures, mechanical properties, and weld quality are analyzed using TEM, EBSD, metallographic imaging, and Vickers hardness. The higher welding speed results in narrower, stronger heat-affected zones (HAZs) and also higher hardness in the nugget zones. The material flow direction in the nugget zone is found to be leaning towards the welding direction as the welding speed increases. Results are coupled with welding parameters and thermal history to aid in the understanding of the complex material flow and texture gradients within the welds in an effort to optimize welding parameters for high-speed processing.

Comportamiento dinámico de puentes en arco con amortiguadores viscosos

Directory of Open Access Journals (Sweden)

Nicolás Parra García

2007-11-01

Full Text Available En éste trabajo se presenta la respuesta sísmica analítica de dos puentes en arco de gran luz, sometiéndolos a un movimiento simulado que incluye efectos de fuente cercana. Para reducir la respuesta se exploró su comportamiento conectando los dos extremos del tablero con la subestructura por medio de amortiguadores viscosos. Se llevaron a cabo una serie de análisis en el plano de ambos modelos para identificar los amortiguadores óptimos. Los resultados indicaron que el uso de amortiguadores viscosos con comportamiento no lineal, ofrece una solución práctica para reducir la respuesta dinámica de estas estructuras.

Processos construtivos de pontes de alvenaria em arco

OpenAIRE

Santos, Pedro Miguel Coelho Almeida

2008-01-01

As pontes de alvenaria em arco são um testemunho de excelência em engenharia, concepção, método construtivo e carácter estético. Existem inúmeras pontes com esta tipologia, construídas em séculos anteriores, que actualmente desempenham as suas funções adequadamente. Devido ao surgimento de novos materiais, dificuldades na produção de blocos de pedra e na construção em arco, esta solução estrutural foi caindo em declínio. Presentemente urge reabilitar vias e suas passagens, é...

Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminium alloy joints

International Nuclear Information System (INIS)

Rajakumar, S.; Muralidharan, C.; Balasubramanian, V.

2011-01-01

The aircraft aluminium alloys generally present low weldability by traditional fusion welding process. The development of the friction stir welding has provided an alternative improved way of satisfactorily producing aluminium joints, in a faster and reliable manner. In this present work, the influence of process and tool parameters on tensile strength properties of AA7075-T 6 joints produced by friction stir welding was analysed. Square butt joints were fabricated by varying process parameters and tool parameters. Strength properties of the joints were evaluated and correlated with the microstructure, microhardness of weld nugget. From this investigation it is found that the joint fabricated at a tool rotational speed of 1400 rpm, welding speed of 60 mm/min, axial force of 8 kN, using the tool with 15 mm shoulder diameter, 5 mm pin diameter, 45 HRc tool hardness yielded higher strength properties compared to other joints.

Estratégia cirúrgica na transposição das grandes artérias associada à obstrução do arco aórtico Surgical strategy in transposition of the great arteries with aortic arch obstruction

Directory of Open Access Journals (Sweden)

Bayard Gontijo Filho

2007-06-01

Full Text Available OBJETIVO: Analisar nossa experiência no tratamento cirúrgico da transposição das grandes artérias (TGA associada à obstrução do arco aórtico. MÉTODO: Entre janeiro de 1998 e dezembro de 2005, realizamos 223 operações de Jatene para correção de TGA: 21 (9,4% pacientes apresentavam obstruções do arco aórtico. A anatomia do arco aórtico evidenciou: coarctação da aorta localizada (n=10; coarctação com hipoplasia tubular do arco aórtico (n=6; interrupção do arco aórtico (n=5. Comunicação interventricular (CIV: 19 pacientes (90,5%, sendo 11 do tipo Taussig-Bing. Desproporção importante entre aorta e artéria pulmonar e anomalias coronárias foram achados freqüentes. Houve 7 correções em dois estágios e 14 correções em um único estágio. A reconstrução do arco foi realizada por ressecção e anastomose término-terminal ampliada (13 ou por translocação da aorta ascendente (8. RESULTADO: Houve cinco (23,8% óbitos hospitalares; apenas um (11,1% nos últimos nove casos consecutivos. Reoperações no período hospitalar: revisão de hemostasia (5, CIV residual + coarctação não identificada (1, estenose residual de arco aórtico (1. Após a alta, houve dois óbitos e três pacientes foram submetidos a reintervenções para estenose da via de saída do ventrículo direito. CONCLUSÃO: O tratamento da transposição das grandes artérias associada à obstrução do arco aórtico apresenta alta complexidade e morbi-mortalidade. Empregamos as correções em um e em dois estágios, obtendo resultados comparáveis. Nossa preferência atual é pela correção precoce em um único estágio para todos os pacientes, independente de sua configuração anatômica.OBJECTIVE:To analyze our experience in the surgical correction of transposition of the great arteries associated with aortic arch obstruction. METHOD: From January 1998 to December 2005 we performed 223 arterial switch operations for transposition of the great

Caracterização do gene vip3A e toxicidade da proteína Vip3Aa50 à lagarta-do-cartucho e à lagarta-da-soja

Directory of Open Access Journals (Sweden)

Camila Soares Figueiredo

2013-09-01

Full Text Available O objetivo deste trabalho foi caracterizar o gene vip3A de Bacillus thuringiensis e verificar a toxicidade da proteína Vip3Aa50 a larvas da lagarta-do-cartucho (Spodoptera frugiperda e da lagarta-da-soja (Anticarsia gemmatalis. O gene vip3A foi amplificado por PCR, com iniciadores específicos, e gerou um fragmento de 2.370 pb. Esse fragmento foi clonado em vetor pGEM-T Easy e, em seguida, sequenciado, subclonado em vetor de expressão pET-28a (+ e inserido em células de Escherichia coli BL21 (DE3. A expressão da proteína Vip3Aa50 foi induzida por isopropil-β-D-1-tiogalactopiranosídeo (IPTG, visualizada em SDS-PAGE e detectada por "Western blot". Os ensaios de toxicidade revelaram alta atividade da proteína Vip3Aa50 contra as larvas neonatas da lagarta-da-soja e da lagarta-do-cartucho, com CL50 de 20,3 e 79,6 ng cm-2, respectivamente. O gene vip3Aa50 é um novo gene da classe vip3A.

Effect of in-situ formed Al3Ti particles on the microstructure and mechanical properties of 6061 Al alloy

Science.gov (United States)

Gupta, Rahul; Chaudhari, G. P.; Daniel, B. S. S.

2018-03-01

In this study, in situ Titanium-tri-aluminide (Al3Ti) particles reinforced Al 6061 alloy matrix composites were fabricated by the reaction of potassium hexafluorotitanate (K2TiF6) inorganic salt with molten Al 6061 alloy via liquid metallurgy route. The development of in-situ Al3Ti particles and their effects on the mechanical properties such as yield strength (YS), ductility, ultimate tensile strength (UTS) and hardness, and microstructure of Al 6061 alloy were studied. It was observed from the results that in-situ formed Al3Ti particles were blocky in morphology whose average size was around 2.6 ± 1.1 μm. Microstructure studies showed that grain size of Al matrix was reduced due to the nucleating effect of Al3Ti particles. It was observed from the mechanical properties analysis that when the volume fraction of Al3Ti particles was increased, the hardness, UTS and YS of the composites were also increased as compared to that of Al 6061 alloy. An improvement in ductility was observed with the dispersion of Al3Ti particles in base alloy which is contrary to many other composites.

Microestructura y propiedades mecánicas de materiales compuestos de matriz Al-Mg-Si-Cu reforzada con AlNp, procesados por extrusión de polvos

Directory of Open Access Journals (Sweden)

Ortiz, José Luis

2000-10-01

Full Text Available This article presents an experimental investigation on the structure and mechanical properties of an Al-Mg-Si-Cu P/M alloy reinforced with 5 %, 10 % and 15 % aluminum nitride, produced by extrusión of cold compacted powders mixtures. Mechanical properties in "as extruded" and T6 conditions are compared. Differential Scanning Calorimetry and Dilatometric analysis were conducted to gain further insight into the precipitation process of these materials. Low cost 6061Al/AlNp composites can be produced with rare and small porosity by extrusión of cold compacted shapes without canning. The mechanical properties of the MMCs obtained by this process have limitations for high particles fractions because of clustering effects. All materials are always harder than the matrix and shows a similar behavior during aging processes but kinetics is changed. Potential applications of dilatometric techniques in the aging investigations of aluminum alloys and aluminum matrix composites have been established.

Se presenta una investigación experimental sobre la relación entre la estructura y las propiedades mecánicas de materiales obtenidos mediante la extrusión en caliente de preformas de polvos compactados en frío y cuya matriz es una aleación Al-Mg-Si-Cu con composición cercana a la AA6061, reforzada con tres proporciones diferentes (5, 10 y 15 % en volumen de partículas de AlN. Se utilizó Calorimetría Diferencial de Barrido y Dilatometría sobre las muestras solubilizadas y templadas para complementar el estudio del efecto de las partículas sobre el envejecimiento de la aleación base. Se establece que es posible producir, a bajo costo, materiales compuestos de matriz metálica, MMCs, de matriz de aleación AA6061 reforzada con partículas de AlN con baja porosidad y buenas propiedades mecánicas, mediante la extrusión de mezclas de polvos compactados en frío, sin necesidad de enlatado. Sin embargo, las aglomeraciones de partículas, para

Macroestrutura varisca do Arco da Garraia, Santa Comba, Murça, NE de Portugal

OpenAIRE

Rodrigues, J.; Ribeiro, António; Pereira, Eurico

2003-01-01

A unidade quartzítica que constitui os relevos residuais das serras da Garraia e Santa Comba forma uma macrodobra de 1ª fase varisca que apresenta um flanco inverso com mais de 10 km de extensão e importante variação da direcção das charneiras do dobramento. A cartografia dessa variação evidencia uma importante estrutura arqueada, agora designada por arco da Garraia - Santa Comba. A caracterização geométrica desta estrutura juntamente com os dados do único achado fóssil neste sect...

Evaluación de dos técnicas para el registro de relación céntrica mandibular: arco gótico versus céntrica de poder

OpenAIRE

Maldonado Moreno, Juan Antonio; Lombard Romero, Luis; Gutiérrez Camacho, Claudia; Canseco Jiménez, Joaquín Federico; Cuairán Ruidíaz, Vicente

2015-01-01

La búsqueda de la verdadera posición mandibular con respecto a la cavidad glenoidea y la relación de los otros componentes que constituyen la articulación temporomandibular conocida como relación céntrica (RC) son esenciales para el diagnóstico, tratamiento y estabilidad del mismo. El propósito del estudio fue evaluar dos técnicas para el registro de RC (técnica céntrica de poder y técnica del arco gótico) con objeto de determinar el método más eficaz para brindar mayor veracidad en el regist...

Benzimidazole as corrosion inhibitor for heat treated 6061 Al- SiCp composite in acetic acid

International Nuclear Information System (INIS)

Chacko, Melby; Nayak, Jagannath

2015-01-01

6061 Al-SiCpcomposite was solutionizedat 350 °C for 30 minutes and water quenched. It was then underaged at 140 °C (T6 treatment). The aging behaviour of the composite was studied using Rockwell B hardness measurement. Corrosion behaviour of the underaged sample was studied in different concentrations of acetic acid and at different temperatures. Benzimidazole at different concentrations was used for the inhibition studies. Inhibition efficiency of benzimidazole was calculated for different experimental conditions. Thermodynamic parameters were found out which suggested benzimidazole is an efficient inhibitor and it adsorbed on to the surface of composite by mixed adsorption where chemisorption is predominant. (paper)

Analysis of cooling media effects on microstructure and mechanical properties during FSW/UFSW of AA 6082-T6

Science.gov (United States)

Atif Wahid, Mohd; Siddiquee, Arshad Noor; Khan, Zahid A.; Sharma, Nidhi

2018-04-01

The aim of the present study is to investigate the effect of cooling media on the temperature distribution, microstructure and mechanical properties of the joint produced during Underwater Friction Stir Welding (UFSW) in normal water, cold water (water with crushed ice (CFSW)) and air (FSW), for aluminum alloy (AA) 6082-T6. The results showed that peak temperature during UFSW and CFSW were significantly lower than the FSW. The temperature at the advancing side (AS) of the joint was higher than the retreating side (RS). Substantial reduction in TMAZ/HAZ width was observed during UFSW and CFSW as compared to FSW. Al-Mn-Fe-Si intermetallic phases were seen in all the joints along with the BM. The main strengthening precipitates found in UFSW and CFSW was β″ (Mg5Si6) which changed to β (Mg2Si) precipitates during FSW due to increased temperature. The tensile strength of the joints was best during UFSW followed by FSW and CFSW. The controlled temperature distribution resulted in improved tensile strength whereas both undercooling and overcooling resulted in decreased tensile strength, however, increased cooling rate does not improve the elongation. A typical ‘W’ shape hardness profile was observed in all the joints irrespective of the cooling media used. Maximum hardness was obtained in the UFSW joint due to refined grain structure, high-density dislocations and presence of β″ phases.

Effect of cryogenic cooling on corrosion of friction stir welded AA7010-T7651

DEFF Research Database (Denmark)

Jariyaboon, Manthana; Davenport, A. J.; Ambat, Rajan

2010-01-01

Purpose - The purpose of this paper is to study how cryogenic CO2 cooling during the welding process affects corrosion behaviour of friction stir welding (FSW) AA7010-T7651. Design/methodology/approach - Friction stir welded AA7010-17651 was produced with a rotation speed of 288 rpm and a travel...... speed of 58 mm/min. The liquid CO2 was sprayed onto the weld centre line immediately after the toolpiece. The microstructures of welds in different regions were observed using Field Emission Gun Scanning Electron Microscope (FEG-SEM). The effect on the corrosion susceptibility was investigated using...... a gel visualisation test and potentiodynamic polarisation measurements using a micro-electrochemical technique. Findings - The main corrosion region for both FSWs AA7010-T7651 produced with and without cryogenic CO2 cooling is in the HAZ region, which exhibited intergranular attack. Cryogenic cooling...

Distinguishing diffuse alopecia areata (AA) from pattern hair loss (PHL) using CD3(+) T cells.

Science.gov (United States)

Kolivras, Athanassios; Thompson, Curtis

2016-05-01

Distinguishing between diffuse subacute alopecia areata (AA), in which the peribulbar infiltrate is absent, and pattern hair loss is challenging, particularly in cases that lack marked follicular miniaturization and a marked catagen/telogen shift. We sought to distinguish diffuse AA from pattern hair loss using CD3(+) T lymphocytes. A total of 28 cases of subacute AA and 31 cases of pattern hair loss were selected and a 4-mm punch biopsy was performed. All the specimens were processed using the "HoVert" (horizontal and vertical) technique. In all cases, hematoxylin-eosin and immunohistochemical stains for CD3, CD4, CD8, and CD20 were performed. The presence of CD3(+) lymphocytes within empty follicular fibrous tracts (stela), even without a concomitant peribulbar infiltrate, is a reliable histopathological clue in supporting a diagnosis of AA (sensitivity 0.964, specificity 1, P ≤ .001). Limited tissue for analysis remained in the clinical sample tissue blocks. The presence of CD3(+) T-cells within empty follicular fibrous tracts (stela) supports a diagnosis of AA. Copyright © 2015 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

Influence of laser parameters in surface texturing of Ti6Al4V and AA2024-T3 alloys

Science.gov (United States)

Ahuir-Torres, J. I.; Arenas, M. A.; Perrie, W.; de Damborenea, J.

2018-04-01

Laser texturing can be used for surface modification of metallic alloys in order to improve their properties under service conditions. The generation of textures is determined by the relationship between the laser processing parameters and the physicochemical properties of the alloy to be modified. In the present work the basic mechanism of dimple generation is studied in two alloys of technological interest, titanium alloy Ti6Al4V and aluminium alloy AA2024-T3. Laser treatment was performed using a pulsed solid state Nd: Vanadate (Nd: YVO4) laser with a pulse duration of 10 ps, operating at a wavelength of 1064 nm and 5 kHz repetition rate. Dimpled surface geometries were generated through ultrafast laser ablation while varying pulse energy between 1 μJ and 20 μJ/pulse and with pulse numbers from 10 to 200 pulses per spot. In addition, the generation of Laser Induced Periodic Surface Structures (LIPSS) nanostructures in both alloys, as well as the formation of random nanostructures in the impact zones are discussed.

High-Speed Friction Stir Welding of AA7075-T6 Sheet: Microstructure, Mechanical Properties, Micro-texture, and Thermal History

Energy Technology Data Exchange (ETDEWEB)

Zhang, Jingyi; Upadhyay, Piyush; Hovanski, Yuri; Field, David P.

2017-11-20

Friction-stir-welding (FSW) is a cost-effective and high quality joining process for aluminum alloys (especially heat-treatable allo ys) that has been applied successfully in the aerospace industry. However, the full potential of FSW on more cost-sensitive applications is still limited by the production rate, namely the welding speed of the process. The majority of literature evaluating FSW of aluminum alloys is based on welds made in the range of welding speeds around hundreds of millimeters per minute, and only a handful are at a moderate speed of 1 m/min. In this study we present a microstructural analysis of friction stir welded AA7075-T6 blanks with welding speeds up to 3 m/min. Textures, microstructures, mechanical properties, and weld quality are analyzed using TEM, EBSD, metallographic imaging, and Vickers hardness. Results are coupled with welding parameters to aid in the understanding of the complex material flow and texture gradients within the welds in an effort to optimize welding parameters for high speed processing.

Study of the effect of cerium nitrate on AA2024-T3 by means of electrochemical micro-cell technique

International Nuclear Information System (INIS)

Paussa, L.; Andreatta, F.; Rosero Navarro, N.C.; Durán, A.; Fedrizzi, L.

2012-01-01

Highlights: ► We evaluate the cerium nitrate effect on the electrochemical behavior of AA2024-T3. ► We examine how AA2024-T3 microstructure affects cerium precipitation mechanism. ► The entire AA2024-T3 surface is involved in cerium precipitation. ► Anodic and cathodic inhibitions are both provided by cerium precipitation. ► Mg-rich intermetallics are preferential sites for cerium precipitation. - Abstract: This work evaluates the effect of cerium nitrate as corrosion inhibitor for AA2024-T3 in the view of its introduction in sol–gel coatings able to provide self-healing ability. Since it is well established that deposition of Ce species is activated by the local pH increase, the objective of this paper is to investigate the behavior of AA2024-T3 (open circuit potential and polarization curves) in the presence of Ce species in aggressive solutions by means of a local technique, the electrochemical micro-cell. This technique enables the investigation of small areas with resolution in the micrometer range by the use of glass capillaries to define the working electrode area. The micro-cell results clearly displayed that the entire AA2024-T3 area exposed to the cerium-containing electrolyte was involved in the cerium precipitation mechanism. The heterogeneous electrochemical behavior of the microstructure is minimized by the formation of a cerium-containing layer able to protect the metal substrate.

Structure-property investigations on a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications. Part II: resistance to fatigue crack propagation and fracture

Energy Technology Data Exchange (ETDEWEB)

Horstmann, M.; Ventzke, V.; Petrovski, B.; Kocak, M. [GKSS Research Centre Geesthacht, Institute of Materials Research, Materials Mechanics, Geesthacht (Germany); Kocik, R.; Tempus, G. [AIRBUS Deutschland GmbH, Metal Technology, Bremen (Germany); Vaidya, W.V.

2009-10-15

Investigations were continued on the dissimilar laser beam welds of AA6056 and Ti6Al4V, fabricated by inserting Ti-sheet into the profiled Al-sheet and melting AA6056 alone. By using microstructure, hardness and strength as the criteria, sites exhibiting non-uniform microstructure and localized plastic deformation due to strength mismatch were investigated in two orientations: crack parallel to the weld and crack perpendicular to the weld for fatigue crack propagation and fracture toughness at room temperature. Effect of temper of AA6056 on these properties was studied for two conditions; welding in T4 followed by post weld heat treatment T6, and welding in T6 and naturally aged for a defined period. The orientation ''crack parallel to the weld'' was investigated in 3 locations on the side of AA6056: the interface and the two changeovers on the Al-side. Firstly, between the fusion zone and the heat affected zone (3 mm from the interface) and secondly, between (primary) heat affected zone and towards the base material (7 mm from the interface). Although brittle intermetallic TiAl{sub 3} had been formed at the interface, uncontrolled separation or debonding at the interface was not observed. Insofar the bond quality of the weld was good. However, the ranking of interface was the lowest since fatigue crack propagation was relatively faster than that in the fusion zone and heat affected zone, and fracture toughness was low. Therefore, unstable fatigue crack propagation is observed when the crack propagates perpendicular to the weld from AA6056 towards Ti6Al4V. The results have shown that the dissimilar joints exhibit improved performance when laser beam welded in the T6 condition. (Abstract Copyright [2009], Wiley Periodicals, Inc.) [German] Teil II: Widerstand gegen Ermuedungsrissausbreitung und Bruch Die Untersuchungen an der laserstrahlgeschweissten Mischverbindung aus AA6056 und Ti6Al4V wurden fortgesetzt. Fuer die Ermuedungsrissausbreitungs

Electrochemical Corrosion Behaviour of Alumina-Al 6061 and Silicon Carbide-Al 6061 Metal-Matrix Composites

International Nuclear Information System (INIS)

Mohamed, K.E.; Gad, M.M.A.; El-Sayed, A.A.; Moustafa, O.H.

2001-01-01

The electrochemical corrosion behaviour of powder metallurgy-processed metal-matrix composites (MMCs)based on Al alloy 6061 reinforced with particulate Al 2 O 3 or Sic has been studied in chloride-containing environment. Also, the corrosion behaviour of the unrein forced Al 6061 produced by the same route investigated. Electrochemical tests were conducted on composites containing 10 and 20 vo l% of both reinforced particulates. Potentiodynamic polarization tests have been carried out in neutral as well as acidic and alkaline de-aerated 10 -3 M Na CI solution. In the neutral environment, the addition of Al 2 O 3 particulates was found to shift both the corrosion potential (E corr ) and the break down potential (E b ) slightly into the positive direction irrespective of the volume fraction added (10 and 20 vo l%). On the other hand , Sic caused a shift of E corr into the active site while the E b value was slightly ennobled. For both composites, the corrosion current values at the break down potentials were almost the same as the unrein forced alloy. In an attempt to further clarify the role of both particulate addition, cathodic polarization runs were conducted in both acidic (ph 3) and alkaline (ph 9)solutions for 20 vo l% of Al 2 O 3 and 20 vo l% Sic composite specimens. This indicated that cathodic current values for Sic composites were higher than those corresponding to the unrein forced alloy 6061, and those for the Al 2 O 3 composites were lower

Effect of Cryorolling and Aging on Fatigue Behavior of Ultrafine-grained Al6061

Science.gov (United States)

Yadollahpour, M.; Hosseini-Toudeshky, H.; Karimzadeh, F.

2016-05-01

The effects of cryorolling (rolling at liquid nitrogen temperature) and heat treatment on tensile and high-cycle fatigue properties and fatigue crack growth rate of Al6061 alloy have been investigated in the present work. First, the solid solution-treated bulk Al6061 alloy was subjected to cryorolling with 90% total thickness reduction and subsequent short annealing at 205°C for 5 min and peak aging at 148°C for 39 h to achieve grain refinement and simultaneous improvement of the strength and ductility. Then, hardness measurements, tensile tests, fatigue life, and fatigue crack growth rate tests including fractography analyses using scanning electron microscopy were performed on bulk Al6061 alloy, cryorolled (CR), and cryorolled material followed by peak aging (PA). The PA specimen showed improved yield strength by 24%, ultimate tensile strength by 20%, and ductility by 12% as compared with the bulk Al6061 alloy. It is shown that the fatigue strength of both CR and PA specimens under a high-cycle fatigue regime are larger than that of the bulk Al6061 alloy. Also, fatigue crack growth rates of the CR and PA specimens show significant enhancement in fatigue crack growth resistances as compared with the bulk Al6061 alloy, as a result of grain refinement.

Dynamic Response of AA2519 Aluminum Alloy under High Strain Rates

Science.gov (United States)

Olasumboye, Adewale Taiwo

Like others in the AA2000 series, AA2519 is a heat-treatable Al-Cu alloy. Its excellent ballistic properties and stress corrosion cracking resistance, combined with other properties, qualify it as a prime candidate for armored vehicle and aircraft applications. However, available data on its high strain-rate response remains limited. In this study, AA2519 aluminum alloy was investigated in three different temper conditions: T4, T6, and T8, to determine the effects of heat treatment on the microstructure and dynamic deformation behavior of the material at high strain rates ranging within 1000 ≤ epsilon ≤ 4000 s-1. Split Hopkinson pressure bar integrated with digital image correlation system was used for mechanical response characterization. Optical microscopy and scanning electron microscopy were used to assess the microstructure of the material after following standard metallographic specimen preparation techniques. Results showed heterogeneous deformation in the three temper conditions. It was observed that dynamic behavior in each condition was dependent on strength properties due to the aging type controlling the strengthening precipitates produced and initial microstructure. At 1500 s -1, AA2519-T6 exhibited peak dynamic yield strength and flow stress of 509 and 667 MPa respectively, which are comparable with what were observed in T8 condition at higher rate of 3500 s-1 but AA2519-T4 showed the least strength and flow stress properties. Early stress collapse, dynamic strain aging, and higher susceptibility to shear band formation and fracture were observed in the T6 condition within the selected range of high strain rates. The alloy's general mode of damage evolution was by dispersoid particle nucleation, shearing and cracking.

A versatilidade clínica do arco utilidade The clinical versatility of the utility archwire

Directory of Open Access Journals (Sweden)

Márcio Antonio de Figueiredo

2008-08-01

Full Text Available INTRODUÇÃO: dentro da ciência Bioprogressiva, o arco utilidade, juntamente com o quadri-hélice, é o dispositivo mais conhecido e utilizado para o tratamento de inúmeras más oclusões. Com um desenho ao mesmo tempo simples e original, o arco utilidade tornou-se parte integrante do arsenal ortodôntico utilizado nos períodos das dentaduras mista e permanente. O nome do arco é uma referência à grande versatilidade que este dispositivo oferece, e devido aos vários efeitos que o mesmo pode promover durante o tratamento. OBJETIVO: este artigo destina-se a discutir a fabricação, a ativação e o uso clínico do arco utilidade de Ricketts no tratamento ortodôntico, além de descrever alguns dos princípios da técnica ortodôntica Bioprogressiva. CONCLUSÃO: pode-se concluir que o arco utilidade é um aparelho extremamente versátil, com inúmeras possibilidades clínicas, sendo capaz de intruir, extruir, avançar ou retrair os incisivos superiores e inferiores; manter, diminuir ou aumentar o espaço no arco inferior; além de ancorar os molares inferiores. Entretanto, uma das maiores vantagens de seu uso consiste na correção de más oclusões do tipo Classe II, com mordida profunda.INTRODUCTION: The utility archwire, along with the quad-helix, is the most widely known and used device within the Bioprogressive technique for the treatment of several malocclusions. Featuring a simple yet original design, the utility archwire has become an integral part of the orthodontic arsenal, with applications in the periods of mixed and permanent dentition. The name of this archwire refers to its great versatility, and to the multiple effects it can have during treatment. OBJECTIVE: This article aims to discuss the production, application and clinical use of the Ricketts utility archwire in orthodontic treatments, as well as to describe some of the basics aspects of the Bioprogressive orthodontic technique. CONCLUSION: It can be concluded that the

Failure analysis of fusion clad alloy system AA3003/AA6xxx sheet under bending

Energy Technology Data Exchange (ETDEWEB)

Shi, Y., E-mail: shiyh@mcmaster.ca [Department of Mechanical Engineering, McMaster University, 1280 Main Street West, Hamilton, Ontario, Canada L8S 4L7 (Canada); Jin, H. [Novelis Global Technology Center, P.O. Box 8400, Kingston, Ontario, Canada K7L 5L9 (Canada); Wu, P.D. [Department of Mechanical Engineering, McMaster University, 1280 Main Street West, Hamilton, Ontario, Canada L8S 4L7 (Canada); Lloyd, D.J. [Aluminum Materials Consultants, 106 Nicholsons Point Road, Bath, Ontario, Canada K0H 1G0 (Canada); Embury, D. [Department of Mechanical Engineering, McMaster University, 1280 Main Street West, Hamilton, Ontario, Canada L8S 4L7 (Canada)

2014-07-29

An ingot of AA6xxx Al–Si–Mg–Cu alloy clad with AA3003 Al–Mn alloy was co-cast by Fusion technology. Bending tests and numerical modeling were performed to investigate the potential for sub-surface cracking for this laminate system. To simulate particle-induced crack initiation and growth, both random and stringer particles have been selected to mimic the particle distribution in the tested samples. The morphology of cracking in the model was similar to that observed in clad sheet tested in the Cantilever bend test. The crack initiated in the core close to the clad-core interface where the strain in the core is highest, between particles or near particles and propagates along local shear bands in the core, while the clad layer experiences extreme thinning before failure.

Tensile Properties of Friction Stir Welded Joints of AA 2024-T6 Alloy at Different Welding Speeds

Science.gov (United States)

Avula, Dhananjayulu; Devuri, Venkateswarlu; Cheepu, Muralimohan; Dwivedi, Dheerendra Kumar

2018-03-01

The influence of welding speed on the friction stir welded joint properties of hardness, tensile properties, defects and microstructure characterization are studied in the present study. The friction stir welding was conducted on AA2014-T6 heat treated alloy with 5 mm thickness plate in butt joint configuration. The welding speed was varied from 8 mm/min to 120 mm/min at the fixed travel speed and load conditions. It is observed that the welding speeds at higher rate with wide range can be possible to weld this alloy at higher rates of tool revolution suggesting that the inherent capability of friction stir welding technique for aluminum 2014 alloys. The strength of the joints gradually increases with enhancing of welding speed. The micro structural observations exhibited the formation of equiaxed grains in the stir zone and slightly in the thermo-mechanically affected zone. In addition, the size of the grains decreases with increase in welding speed owing to the presence of low heat input. Hence the hardness of the joints slightly increased in the stir zones over the other zones of the weld nugget. The joint strength initially increases with the welding speed and starts to decreases after reaching to the maximum value. The relationship between the welding conditions and friction stir welded joint properties has been discussed.

ARCO Chairman forecasts end of oil dominance

Science.gov (United States)

Showstack, Randy

The head of one of the world's biggest oil companies said in February that the era of oil dominating the global energy market is creaking to a close. Future energy needs will be met by a mix of fuels that are less harmful to the environment, he said, and he called for the energy and automobile industries to collaborate on solutions to reduce emissions.“We've embarked on the beginning of the last days of the age of oil,” ARCO Chairman Mike Bowlin said at a Cambridge Energy Research Associates conference in Houston, Texas, where he also described how ARCO is moving toward a new energy model. “Our challenge is not merely to survive today's low prices, but to plan for a future in which hydrocarbons are just one of a wide variety of clean fuels that will build the global economy of the 21st century”.

Heat input effect of friction stir welding on aluminum alloy AA 6061-T6 welded joint

Czech Academy of Sciences Publication Activity Database

Sedmak, A.; Kumar, R.; Chattopadhyaya, S.; Hloch, Sergej; Tadić, S.; Djurdjević, A. A.; Čeković, I. R.; Dončeva, E.

2016-01-01

Roč. 20, č. 2 (2016), s. 637-641 ISSN 0354-9836 Institutional support: RVO:68145535 Keywords : friction stir welding * defect * heat input * maximum temperature Subject RIV: JQ - Machines ; Tools Impact factor: 1.093, year: 2016 http://www.doiserbia.nb.rs/img/doi/0354-9836/2016/0354-98361500147D.pdf

ThSi_2 type ytterbium disilicide and its analogues YbT_xSi_2_-_x (T = Cr, Fe, Co)

International Nuclear Information System (INIS)

Peter, Sebastian C.; Kanatzidis, Mercouri G.

2012-01-01

YbSi_2 and the derivatives YbT_xSi_2_-_x (T = Cr, Fe, Co) crystallizing in the α-ThSi_2 structure type were obtained as single crystals from reactions run in liquid indium. All silicides were investigated by single-crystal X-ray diffraction, I4_1/amd space group and the lattice constants are: a = 3.9868(6) Aa and c = 13.541(3) Aa for YbSi_2, a = 4.0123(6) Aa and c = 13.542(3) Aa for YbCr_0_._2_7Si_1_._7_3, a = 4.0142(6) Aa and c = 13.830(3) Aa for YbCr_0_._7_1Si_1_._2_9, a = 4.0080(6) Aa and c = 13.751(3) Aa for YbFe_0_._3_4Si_1_._6_6, and a = 4.0036(6) Aa, c = 13.707(3) Aa for YbCo_0_._2_1Si_1_._7_9. YbSi_2 and YbT_xSi_2_-_x compounds are polar intermetallics with three-dimensional Si and M (T+Si) polyanion sub-networks, respectively, filled with ytterbium atoms. The degree of substitution of transition metal at the silicon site is signficant and leads to changes in the average bond lengths and bond angles substantially. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Aislamiento de Saprolegnia sp. (Fungi: Saprolegniaceae de Onchorhyncus mykiss (Pisces: Salmonidae “trucha arco iris” en cutiverio

Directory of Open Access Journals (Sweden)

Libertad Alzamora

2014-06-01

Full Text Available El objetivo del estudio fue demostrar el origen infeccioso de la mortandad de alevinos y de las lesiones presentadas en adultos de Oncorhynchus mykiss Walbaum 1792, "trucha arco iris", en la piscigranja "El Ingenio», empleando una metodología simple y efectiva. Se colectaron alevinos, ovas, adultos y muestras de agua de las pozas de alevinos. Las muestras se cultivaron sobre semillas de Cucurbita maxima ‘zapallo’, como sustrato, evidenciándose colonias típicas a los siete días. Las características microscópicas de las hilas correspondieron al patrón gráfico de Saprolegnia sp., lo que concuerda con la sintomatología observada en los adultos capturados. La presencia de este patógeno estaría relacionada con la elevada mortandad registrada en los alevinos (40%, probablemente por la importación de las ovas infectadas con el hongo. El método fue electivo, porque el sustrato empleado, favoreció el crecimiento del hongo, y es de fácil aplicación y bajo costo.

Eficiencia de la transferencia de elementos aleantes en fundentes durante el proceso de soldadura automática por arco sumergido

Directory of Open Access Journals (Sweden)

Quintana, R.

2003-02-01

Full Text Available It is assessed the transfer of chromium, manganese and carbon of different agglomerate fluxes constituted by 18.75 % of alloyed load and 81.25 % of matrix during the SAW process (Submerge Arc Welding. A vitreous basic matrix corresponding to the system SiO₂-Al₂O₃-(CaO+MgO was obtained from minerals by fusion in the electric arc furnace. The current proportions of the alloyed load components (FeCr, FeMn and graphite were carried out using a McLean Anderson experiment design. The corresponding fluxes to each experimental point were obtained by granulation with liquid glass; afterwards, their transfer coefficient for a given regimen of welding was determined. The transfer coefficients were calculated by means of a formula based on the laws of mass conservation and of distribution.

Se realizó un estudio de la transferencia de cromo, manganeso y carbono durante el proceso SAW (Submerged Arc Welding de diferentes fundentes aglomerados constituidos por 18,75 % de carga aleante y 81,25 % de matriz. En homo eléctrico de arco, mediante la fusión de mezclas de minerales, se obtuvo una matriz básica vitrea, correspondiente al sistema SiO₂-Al₂O₃ -(CaO+MgO. La proporción en que se encuentran los componentes de la carga aleante (FeCr, FeMn y grafito se estableció a través de un diseño de experimentos del tipo McLean Anderson. Los fundentes correspondientes a cada punto experimental se obtuvieron por rodadura, utilizando vidrio líquido como aglomerante. A los fundentes obtenidos se les determinaron los coeficientes de transferencia para un régimen de soldadura invariable, utilizando para ello una expresión de cálculo basada en las leyes de conservación de masa y de reparto.

Effect of technological parameters on formability of semi-solid rheological casting-forging 6061 alloy

Directory of Open Access Journals (Sweden)

Jianbo TAN

2016-02-01

Full Text Available The 6061 alloy cooling curve is determined by analysis software, and the 6061 semi-solid alloy is prepared by manual paddling process. The primary solid fraction is tested through prepared water quenched samples under different temperature. With H1F100 type servo press and cup type test mold, the forming of the 6061 semi-solid alloy rheological casting-forging is made. The influence of alloy temperature, forming pressure, upper mould temperature and holding time on the formability of 6061 alloy is researched. The results show that within the same set of mold completing casting and forging of the alloy is feasible. Along with the increase of the alloy temperature and the upper mould temperature, the formability of finished products becomes better. Under this experimentation, when the temperature of the semi-solid alloy is amongst 642 ℃ to 645 ℃ and the upper mould preheating temperature is amongst 200 ℃ to 300 ℃, casting defects such as cold insulation will form in the casting-forging sample of semi-solid 6061 alloy with the prolongation of holding time.

Penetration Experiments with 6061-T6511 Aluminum Targets and Spherical-Nose Steel Projectiles at Striking Velocities Between 0.5 and 3.0 km/s

Energy Technology Data Exchange (ETDEWEB)

Forrestal, M.J.; Piekutowski, A.J.

1999-02-04

We conducted depth of penetration experiments with 7.11-mm-diameter, 74.7-mm-long, spherical-nose, 4340 steel projectiles launched into 250-mm-diameter, 6061-T6511 aluminum targets. To show the effect of projectile strength, we used projectiles that had average Rockwell harnesses of R{sub c} = 36.6, 39.5, and 46.2. A powder gun and two-stage, light-gas guns launched the 0.023 kg projectiles at striking velocities between 0.5 and 3.0 km/s. Post-test radiographs of the targets showed three response regions as striking velocities increased: (1) the projectiles remained visibly undeformed, (2) the projectiles permanently deformed without erosion, and (3) the projectiles eroded and lost mass. To show the effect of projectile strength, we compared depth-of-penetration data as a function of striking velocity for spherical-nose rods with three Rockwell harnesses at striking velocities ranging from 0.5 to 3.0 km/s. To show the effect of nose shape, we compared penetration data for the spherical-nose projectiles with previously published data for ogive-nose projectiles.

Simulations of the Penetration of 6061-T6511 Aluminum Targets by Spherical-Nosed VAR 4340 Steel Projectiles

Energy Technology Data Exchange (ETDEWEB)

Tabbara, M.R.; Warren, T.L.

1998-10-21

In certain penetration events it is proposed that the primary mode of deformation of the target can be approximated by known analytical expressions. In the context of an analysis code, this approximation eliminates the need for discretizing the target as well as the need for a contact algorithm. Thus, this method substantially reduces the computer time and memory requirements. In this paper a forcing function which is derived from a spherical-cavity expansion (SCE) analysis has been implemented in a transient dynamic finite element code. This irnplementation is capable of computing the structural and component responses of a projectile due to a three dimensional penetration event. Simulations are presented for 7.1 l-mm-diameter, 74.7-mm-long, spherical-nose, vacuum- arc-remelted (VAR) 4340 steel projectiles that penetrate 6061-T6511 aluminum targets. Final projectile configurations obtained from the simulations are compared with post-test radiographs obtained from the corresponding experiments. It is shown that the simulations accurately predict the permanent projectile deformation for three dimensional loadings due to incident pitch and yaw over a wide range of striking velocities.

The Development of 6061-Aluminum Windows for the MICE Liquid Absorber

International Nuclear Information System (INIS)

Lau, W.; Yang, S.Q.; Green, M.A.; Ishimoto, S.; Swanson, J.

2005-01-01

The thin windows for the Muon Ionization Cooling Experiment (MICE) liquid Absorber will be fabricated from 6061-T6-aluminum. The absorber and vacuum vessel thin windows are 300-mm in diameter and are 180 mm thick at the center. The windows are designed for an internal burst pressure of 0.68 MPa (100 psig) when warm. The MICE experiment design calls for changeable windows on the absorber, so a bolted window design was adopted. Welded windows offer some potential advantages over bolted windows when they are on the absorber itself. This report describes the bolted window and its seal. This report also describes an alternate window that is welded directly to the absorber body. The welded window design presented permits the weld to be ground off and re-welded. This report presents a thermal FEA analysis of the window seal-weld, while the window is being welded. Finally, the results of a test of a welded-window are presented

LA PUNTA DE ALETAS Y PEDÚNCULO DEL SOLUTRENSE EXTRACANTÁBRICO: DE LOS “DIMONIS” AL ARCO

Directory of Open Access Journals (Sweden)

Francisco Javier Muñoz Ibáñez

2013-11-01

Full Text Available La punta de aletas y pedúnculo (PAP es uno de los elementos característicos del Solutrense Extracantábrico. Este tipo de proyectiles se analizan a partir de parámetros morfológicos y tipométricos. Se propone un modelo sobre los procesos de fabricación y su repercusión en el registro arqueológico. A partir del análisis de las PAP se establecen las características balísticas de este tipo de utillaje. Su morfología contribuye a plantear la hipótesis de que se hayan utilizado como punta de flecha para arco. Los resultados muestran que las PAP son morfológicamente y métricamente adecuadas para ser lanzadas por un arco. Las réplicas tuvieron un comportamiento balístico perfecto, así que podemos considerar que el origen del arco podría situarse antes de lo pensado tradicionalmente.Barbed and tanged points (BTP are one of the specific elements which characterize Extracantabrian Solutrean. This type of projectile points are characterized from morphological and typometrical parameters. A model is proposed to explain the manufacturing processes and their effect on the archaeological record. From analysis of the BTP are established the ballistics characteristic of this type of tool kit. Its morphology contributes to fix the hypothesis that its possible function can be arrowheads propelled by a bow. The results show that BTP are morphologically and metric well suited to be thrown by a bow. The replicas had a perfect ballistic behaviour, so we can think that the origin of bow can be earlier than traditionally thought.

Surface asperity evolution and microstructure analysis of Al 6061T5 alloy in a quasi-static cold uniaxial planar compression (CUPC)

International Nuclear Information System (INIS)

Li, Hejie; Jiang, Zhengyi; Wei, Dongbin; Gao, Xingjian; Xu, Jianzhong; Zhang, Xiaoming

2015-01-01

Highlights: • We used AFM and EBSD to analyses the surface asperity flattening process. • Analysis of the influence of deformation rate on the surface asperity flattening. • Investigation of the effect of lubrication on microstructure development. • Deformation rate influence the generation of orientation components obviously. - Abstract: In a quasi-static cold uniaxial planar compression, surface asperity evolution and microstructure analysis of Al 6061T5 alloy are carried out by employing Atomic Force Microscope (AFM) and Electron Backscattered Diffraction (EBSD) methods. Strain rate affects the surface asperity evolution obviously. While lubrication can hinder the surface asperity flattening by constraining the surface localized deformation. Lubrication can accelerate the crystallization in CUPC process. It also impedes the activation of some orientation components by hindering the activation of related slip systems in light metal Al alloy

On the Role of Processing Parameters in Producing Recycled Aluminum AA6061 Based Metal Matrix Composite (MMC-AlR Prepared Using Hot Press Forging (HPF Process

Directory of Open Access Journals (Sweden)

Azlan Ahmad

2017-09-01

Full Text Available Solid-state recycling, which involves the direct recycling of scrap metal into bulk material using severe plastic deformation, has emerged as a potential alternative to the conventional remelting and recycling techniques. Hot press forging has been identified as a sustainable direct recycling technique that has fewer steps and maintains excellent material performance. An experimental investigation was conducted to explore the hardness and density of a recycled aluminum-based metal matrix composite by varying operating temperature and holding time. A mixture of recycled aluminum, AA6061, and aluminum oxide were simultaneously heated to 430, 480, and 530 °C and forged for 60, 90, and 120 min. We found a positive increase in microhardness and density for all composites. The hardness increased approximately 33.85%, while density improved by about 15.25% whenever the temperature or the holding time were increased. Based on qualitative analysis, the composite endures substantial plastic deformation due to the presence of hardness properties due to the aluminum oxide embedded in the aluminum matrix. These increases were significantly affected by the operating temperature; the holding time also had a subordinate role in enhancing the metal matrix composite properties. Furthermore, in an effort to curb the shortage of primary resources, this study reviewed the promising performance of secondary resources produced by using recycled aluminum and aluminum oxide as the base matrix and reinforcement constituent, respectively. This study is an outline for machining practitioners and the manufacturing industry to help increase industry sustainability with the aim of preserving the Earth for our community in the future.

On the Role of Processing Parameters in Producing Recycled Aluminum AA6061 Based Metal Matrix Composite (MMC-AlR) Prepared Using Hot Press Forging (HPF) Process.

Science.gov (United States)

Ahmad, Azlan; Lajis, Mohd Amri; Yusuf, Nur Kamilah

2017-09-19

Solid-state recycling, which involves the direct recycling of scrap metal into bulk material using severe plastic deformation, has emerged as a potential alternative to the conventional remelting and recycling techniques. Hot press forging has been identified as a sustainable direct recycling technique that has fewer steps and maintains excellent material performance. An experimental investigation was conducted to explore the hardness and density of a recycled aluminum-based metal matrix composite by varying operating temperature and holding time. A mixture of recycled aluminum, AA6061, and aluminum oxide were simultaneously heated to 430, 480, and 530 °C and forged for 60, 90, and 120 min. We found a positive increase in microhardness and density for all composites. The hardness increased approximately 33.85%, while density improved by about 15.25% whenever the temperature or the holding time were increased. Based on qualitative analysis, the composite endures substantial plastic deformation due to the presence of hardness properties due to the aluminum oxide embedded in the aluminum matrix. These increases were significantly affected by the operating temperature; the holding time also had a subordinate role in enhancing the metal matrix composite properties. Furthermore, in an effort to curb the shortage of primary resources, this study reviewed the promising performance of secondary resources produced by using recycled aluminum and aluminum oxide as the base matrix and reinforcement constituent, respectively. This study is an outline for machining practitioners and the manufacturing industry to help increase industry sustainability with the aim of preserving the Earth for our community in the future.

21 CFR 1304.33 - Reports to ARCOS.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Reports to ARCOS. 1304.33 Section 1304.33 Food and... substance having a stimulant effect on the central nervous system, which material, compound, mixture or... assigned to the product under the National Drug Code System of the Food and Drug Administration. (e...

Caratterizzazione microstrutturale e prove di resilienza su giunti Friction Stir Welding e Linear Friction Welding di compositi a matrice metallica

Directory of Open Access Journals (Sweden)

M. Merlin

2010-04-01

Full Text Available In questo studio sono stati caratterizzati giunti Friction Stir Welding e Linear Friction Welding su compositi a matrice in lega di alluminio e rinforzo particellare ceramico. Il processo FSW è stato applicato a due compositi ottenuti con processo fusorio, quindi estrusi e trattati termicamente T6: AA6061/20%vol.Al2O3p e AA7005/10%vol.Al2O3p. I giunti LFW sono stati invece realizzati su un composito con matrice in lega di alluminio e rinforzo particellare in carburo di silicio, ottenuto mediante metallurgia delle polveri, quindi forgiato e trattato termicamente T4: AA2124/25%vol.SiCp. Sono stati esaminati gli effetti della saldatura sullecaratteristiche microstrutturali dei giunti, avvalendosi di tecniche di microscopia ottica con analisi di immagine e di microscopia elettronica in scansione (SEM con microsonda a dispersione di energia (EDS. Sono state quindi condotte prove di resilienza con pendolo strumentato Charpy. Lo studio dei meccanismi di danneggiamento è stato effettuato mediante analisi al SEM delle superfici di frattura. Entrambi i processi di saldatura hanno portato a giunti sostanzialmente esenti da difetti. La microstruttura dei cordoni è risultata dipendente sia dalle caratteristiche microstrutturali iniziali dei compositi considerati, sia dalla tipologia di processo di saldatura. Nel caso dei compositi AA6061/20%Al2O3p e AA7005/10%Al2O3p saldati FSW si è osservato un sostanziale incremento di resilienza, rispetto al materiale base, in conseguenza dell’affinamento dei grani della matrice, della riduzione della dimensione media delle particelle di rinforzo e della loro spigolosità, indotte dal processo di saldatura. Il composito AA2124/25%SiCp saldato LFW ha presentato valori di resilienza confrontabili con quelli del materiale base, in conseguenza, soprattutto, dei limitati effetti della saldatura su dimensione e distribuzione delle particelle di rinforzo.

Entomofauna associada a reflorestamentos experimentais no município de Pau d'Arco, Pará Entomofauna associated with experimental reforestation in Pau d'Arco, Pará

Directory of Open Access Journals (Sweden)

Alexandre Mehl Lunz

2011-12-01

Full Text Available Este estudo objetivou verificar a ocorrência de insetos em reflorestamentos experimentais com paricá, Schizolobium parahyba var. amazonicum (Fabaceae; acácia, Racosperma mangium (Fabaceae e teca, Tectona grandis (Lamiaceae, na região de Pau d'Arco, PA, associando os efeitos sazonais e ontogenéticos nos plantios. O estudo foi conduzido entre os meses de maio de 2006 a junho de 2007 e constou de levantamentos mensais de insetos associados a plantios com idades de três a 16 meses. Houve associação positiva entre a ocorrência de insetos e suas respectivas injúrias com a sazonalidade e o desenvolvimento das plantas. Ao menos um pico populacional de insetos desfolhadores, sugadores e/ou polinizadores foi observado nas três espécies florestais. A análise de agrupamento confirmou a associação entre ocorrência de insetos, período chuvoso e idade da planta, destacando-se (a lepidópteros em T. grandis, (b coleópteros desfolhadores em S. parahyba; (c acridídeos e lepidópteros em R. mangium; (d cicadelídeos em S. parahyba e T. grandis; e (e apídeos em R. mangium.This study aimed to verify the occurrence of insects in experimental reforestation with Schizolobium parahyba var. amazonicum (Fabaceae known as paricá, Racosperma mangium (Fabaceae known as acacia and Tectona grandis (Lamiaceae known as teca in the region of Pau d'Arco, Pará State, Brazil associating the seasonal and ontogenetic effects in plantations. The study was conducted from May 2006 to June 2007 and consisted of monthly surveys of insects associated with plantations aging 3 to 16 months. There was a positive association between the occurrence of insects and their injuries with seasonality and plant development. At least one population peak of defoliators, sucking and / or pollinators were observed in three tree species. Cluster analysis confirmed the association between the occurrence of insects, rainy season and plant age, especially (a lepidopteran in T. grandis, (b

Experimental processing and the effects of cenosphere on some mechanical properties of Al6061-SiC composites

Science.gov (United States)

Ashoka, E.; Sharanaprabhu, C. M.; Krishnaraja, G. Kodancha; Kudari, S. K.

2018-04-01

In this paper, stir casting technique was utilized to fabricate the hybrid Aluminium alloy (Al 6061) metal matrix reinforced with silicon carbide (SiC) and cenosphere particulates. An Al6061-SiC-Cenosphere hybrid composite is selected with 3wt% of silicon carbide and 3wt%, 6wt% and 9wt% proportions of cenosphere particulates. The uniform distribution of these two reinforcement particulates in Al6061matrix was achieved by stirring and pouring the hybrid composite mixture into the steel mould to accomplish the rectangular shaped casting. These various hybrid composites were studied with respect to its microstructure and some mechanical properties. The rectangular shaped casting of various hybrid composites was machined according to ASTM tensile specimens standards to estimate some mechanical properties. For various cast hybrid composites a comparative study is done with respect to modulus of elasticity, yield stress, percentage elongation and microhardness. Finally, the distribution of particulates and the nature of the tensile specimen fractured surface of various hybrid composites were understood using scanning electron microscope.

Observation of non-chemical equilibrium effect on Ar-CO2-H2 thermal plasma model by changing pressure

International Nuclear Information System (INIS)

Al-Mamun, Sharif Abdullah; Tanaka, Yasunori; Uesugi, Yoshihiko

2009-01-01

The authors developed a two-dimensional one-temperature chemical non-equilibrium (1T-NCE) model of Ar-CO 2 -H 2 inductively coupled thermal plasmas (ICTP) to investigate the effect of pressure variation. The basic concept of one-temperature model is the assumption and treatment of the same energy conservation equation for electrons and heavy particles. The energy conservation equations consider reaction heat effects and energy transfer among the species produced as well as enthalpy flow resulting from diffusion. Assuming twenty two (22) different particles in this model and by solving mass conservation equations for each particle, considering diffusion, convection and net production terms resulting from hundred and ninety eight (198) chemical reactions, chemical non-equilibrium effects were taken into account. Transport and thermodynamic properties of Ar-CO 2 -H 2 thermal plasmas were self-consistently calculated using the first-order approximation of the Chapman-Enskog method. Finally results obtained at atmospheric pressure (760 Torr) and at reduced pressure (500, 300 Torr) were compared with results from one-temperature chemical equilibrium (1T-CE) model. And of course, this comparison supported discussion of chemical non-equilibrium effects in the inductively coupled thermal plasmas (ICTP).

La geodesia y la investigación científica en la Francia del Siglo XIX la medición del arco de meridiano franco-argelino (1870-1895

Directory of Open Access Journals (Sweden)

Martina Schiavon

2004-07-01

Full Text Available En el siglo XIX la geodesia era fundamental para la astronómia y las ciencias de la tierra (cartografía, geología, geofísica y también para las disciplinas militares. En las opéraciones de medida de un arco de meridiano, de paralelo o de la posición astronómica de una estación geodésica, los oficiales militares han utilizado en el terreno las "técnicas" materiales y conceptuales que fueron creadas para observar las estrellas. En consecuencia, ellos han adaptado y modificado los conocimientos característicos del observatorio para medir los objetos terrestres. Sin embargo, los historiadores han raramente investigado la geodesia como una actividad del observatorio astronómico. En este articulo, considerando la geodesia como una actividad humana y una disciplina en la cual el astronomo y el oficial militar colaboraron, me propongo explorar los trabajos de terreno en geodesia y mostrar que las medidas de precisión de terreno constituyen una esfera sociológica, material y cognitiva por excelencia. Tomaré como ejemplo la medida de un arco de meridiano realizada bajo la dirección del capitán Francois Perrier, en Francia y Argelia entre 18701' 1895. PAIABRAS erAVES. Geodesia, medida y cultura de la precisión, ejército, XIX siglo, Francia

Morbidade hospitalar por ingestão de esteroides anabólico-androgênicos (EAA no Brasil Hospital morbidity due to anabolic-androgenic steroids (AAS consumption in Brazil

Directory of Open Access Journals (Sweden)

Sérgio Henrique Almeida da Silva Junior

2013-04-01

Full Text Available INTRODUÇÃO: Os esteroides anabólico-androgênicos (EAA são hormônios sexuais masculinos, promotores e mantenedores das características sexuais associadas à masculinidade e do status anabólico dos tecidos somáticos. Os efeitos físicos e mentais do uso abusivo de EAA são raros e é praticamente impossível afirmar com certeza quais os efeitos adversos que poderão tornar-se evidentes após a autoadministração, mas os mesmos constituem risco de morte para os indivíduos. OBJETIVO: O objetivo do presente estudo foi descrever as principais características da morbidade por ingestão de EAA no Brasil, no período de 2000/2010. MÉTODOS: As informações sobre as internações hospitalares foram obtidas dos bancos de dados informatizados do Ministério da Saúde. Na análise da ingestão de EAA como diagnóstico principal e secundário de hospitalização, partiu-se das causas de internação sob os códigos E28.1 (excesso de andrógenos, E34.5 (síndrome de resistência a andrógenos, T38.7 (intoxicação por andrógenos e anabolizantes congêneres e Y42.7 (efeitos adversos de andrógenos e anabolizantes congêneres do CID-10. RESULTADOS: As hospitalizações por EAA foram responsáveis por 0,001% do total de internações do País. Foram contabilizadas 1.319 internações (média = 119,9, DP = 99,01. A síndrome de resistência a andrógenos foi a principal causa, correspondendo a 55,8% do total de internações. Do total de internações, 1% dos pacientes evoluiu para óbito e o tempo máximo de permanência foi de 47 dias (média = 3,8 e DP = 4,7. Minas Gerais, Maranhão e Espírito Santo possuíram as maiores taxas de internações por 1.000.000 de habitantes, nos anos de 2002 a 2007. As mulheres e a faixa etária de 15-29 tiveram maiores taxas, 82,5% e 37,7%, respectivamente. CONCLUSÃO: Os resultados do presente estudo mostraram uma hospitalização por ingestão de EAA relativamente baixa, as mulheres e indivíduos na faixa et

Degradation of the corrosion resistance of anodic oxide films through immersion in the anodising electrolyte

Energy Technology Data Exchange (ETDEWEB)

Garcia-Rubio, M. [Departamento de Quimica-Fisica Aplicada, Universidad Autonoma de Madrid, 28049-Madrid (Spain); Department of Surface Technologies, Engineering of Materials and Processes, Airbus Spain, Av. John Lennon s/n 28906-Getafe (Spain); Ocon, P., E-mail: pilar.ocon@uam.e [Departamento de Quimica-Fisica Aplicada, Universidad Autonoma de Madrid, 28049-Madrid (Spain); Curioni, M.; Thompson, G.E.; Skeldon, P. [Corrosion and Protection Center, School of Materials, The University of Manchester, M60 1QD England (United Kingdom); Lavia, A. [Department of Surface Technologies, Engineering of Materials and Processes, Airbus Spain, Av. John Lennon s/n 28906-Getafe (Spain); Garcia, I. [Department of Surface Technologies, Engineering of Materials and Processes, Airbus Spain, Av. John Lennon s/n 28906-Getafe (Spain); Department of Corrosion and Protection, National Center for Metallurgical Research CENIM-CSIC, Av. Gregorio del Amo 8, 28040-Madrid (Spain)

2010-07-15

The deterioration of AA2024, AA6061 and AA7475 anodised in an environmentally-compliant tartaric acid/sulphuric acid electrolyte has been examined as a function of the immersion time in the electrolyte after termination of anodising. By transmission electron microscopy and scanning electron microscopy, degradation of the porous oxide film was qualitatively observed on AA2024. Electrochemical impedance spectroscopy revealed that AA2024 and AA7075 were more sensitive to prolonged immersion in the anodising electrolyte compared with AA6061, due to increased barrier layer thinning rates and increased susceptibility to localized corrosion. Salt spray tests confirmed the previous, indicating decay of anticorrosion performance for AA2024 and AA7075.

Degradation of the corrosion resistance of anodic oxide films through immersion in the anodising electrolyte

International Nuclear Information System (INIS)

Garcia-Rubio, M.; Ocon, P.; Curioni, M.; Thompson, G.E.; Skeldon, P.; Lavia, A.; Garcia, I.

2010-01-01

The deterioration of AA2024, AA6061 and AA7475 anodised in an environmentally-compliant tartaric acid/sulphuric acid electrolyte has been examined as a function of the immersion time in the electrolyte after termination of anodising. By transmission electron microscopy and scanning electron microscopy, degradation of the porous oxide film was qualitatively observed on AA2024. Electrochemical impedance spectroscopy revealed that AA2024 and AA7075 were more sensitive to prolonged immersion in the anodising electrolyte compared with AA6061, due to increased barrier layer thinning rates and increased susceptibility to localized corrosion. Salt spray tests confirmed the previous, indicating decay of anticorrosion performance for AA2024 and AA7075.

Sintering Behavior of CNT Reinforced Al6061 and Al2124 Nanocomposites

Directory of Open Access Journals (Sweden)

Nouari Saheb

2014-01-01

Full Text Available Ball milling and spark plasma sintering were successfully used to produce carbon nanotube reinforced Al6061 and Al2124 nanocomposites which have potential applications in the fields of aerospace, automotive, electronics, and high precision instrumentation. Al2124 and Al6061 nanocomposite powders containing 0.5 to 2 wt.% CNTs prepared through sonication and wet ball milling were spark plasma sintered at 400, 450, and 500°C for 20 minutes under a pressure of 35 MPa. CNTs were better dispersed, and less agglomerated and had good adhesion to the matrix in composites containing 1 wt.% CNTs. The increase of CNT content to 2 wt.% led to the formation of CNT clusters which resulted in less uniform and homogenous composite powders. Almost full densification of Al6061 reinforced with CNTs was achieved at 500°C. Also, CNTs reinforced Al2124 nanocomposites reached very high densities at 500°C. Composites reinforced with 1 wt.% CNTs displayed better densification compared to composites containing 2 wt.% CNTs. The increase of CNTs content from 0.5 to 1 wt.% increased the hardness of the Al6061 and Al2124 alloys to maximum values. Further increase of CNTs content to 2 wt.% decreased the hardness to values lower than that of the monolithic alloys.

AVALIAÇÃO DA VULNERABILIDADE FÍSICA DA ORLA COSTEIRA EM NÍVEL LOCAL, TOMANDO COMO EXEMPLO O ARCO PRAIAL ENTRE RIO DAS OSTRAS E O CABO BÚZIOS/RJ

Directory of Open Access Journals (Sweden)

Dieter Muehe

2011-12-01

Full Text Available Processos erosivos representam um risco para as áreas urbanizadas próximas à linha de costa. Com a finalidade de avaliar o grau de vulnerabilidade à erosão costeira, considerando um cenário de elevação do nível do mar para os próximos 50 anos (até 2060, um conjunto de técnicas, consistindo de comparação de fotos aéreas, levantamentos batimétricos e de perfis de praia, modelagem computacional de refração de ondas, caracterização morfodinâmica da praia, análise granulométrica da praia e antepraia e determinação do perfil de equilíbrio, foi aplicado num arco praial localizado entre a cidade de Rio das Ostras e a Ponta do Pai Vitório, no litoral do Estado do Rio de Janeiro. O arco praial é segmentado em dois semiarcos devido à presença de um promontório rochoso e a desembocadura de um rio junto à cidade de Barra de São João, sendo caracterizado por variados níveis de urbanização e distintos graus de exposição às ondas e ambientes morfodinamicamente diferenciados. Os resultados indicaram um desequilíbrio morfodinâmico em grande parte do arco praial e da antepraia entre Rio das Ostras e Barra de São João, justamente onde a urbanização se encontra mais próxima da praia. Uma projeção de recuo da costa para os próximos 50 anos, considerando a atual taxa de erosão e de elevação do nível do mar e mais a elevação do nível do mar prevista em função do incremento da taxa atual por efeito climático indicou recuos potenciais da ordem de 10 a 30m, o que representa um risco potencial para muitas das construções da orla costeira.

5,6-EET potently inhibits T-type calcium channels

DEFF Research Database (Denmark)

Cazade, M.; Bidaud, I.; Hansen, Pernille B. Lærkegaard

2014-01-01

T-type calcium channels (T-channels) are important actors in neuronal pacemaking, in heart rhythm, and in the control of the vascular tone. T-channels are regulated by several endogenous lipids including the primary eicosanoid arachidonic acid (AA), which display an important role in vasodilation...

Pasarela metálica excéntrica suspendida y apoyada en un arco metálico en Orense, España

Directory of Open Access Journals (Sweden)

Besiga Díaz-Blanco, Julio

2007-12-01

Full Text Available The article explains the design and project of a steel footbridge, suspended and supported by an eccentric arc, situated in Orense. The footbridge, known as “Bellour”, has a main span of 20 meters, with a leaned steel eccentric arc that supports the deck. The deck was designed with a uniform slope of 8%, due the difference of level between each end. It is suspended from the arc in the Orense side and supported in the other boarder, because of the headway limitations. The deck is 2,80 meters wide. The cross section is composed of a steel eccentric tube with steel cantilever beams, of variable depth, and is joined at the other edge to a small steel tube. The pedestrian zone is narrower than the board, leaving individual empty spaces at both sides, and is constituted by a structural concrete slab of 7 centimeters thick and 2 meters wide, linked to the deck top sheet, with a steel profiles. The board was designed with a structural skeleton, spine shaped, suspended or supported from the arc, and it´s joined to the skin, a rough concrete surface that avoids frost and slides due to the rain.En este artículo se expone el diseño de una pasarela metálica excéntrica suspendida y apoyada en un arco metálico situada en la ciudad de Orense. La pasarela, conocida por «Bellour», tiene un único vano de 20 metros de luz, soportado excéntricamente por un arco metálico inclinado. Las cotas de inicio y fin de la pasarela obligaron a diseñar un tablero inclinado que está suspendido del arco en el lado Orense y apoyado en el otro extremo al permitirlo el gálibo de la carretera. La sección transversal del tablero está formada por un tubo excéntrico del que parten unas ménsulas metálicas de canto variable, unidas en su otro extremo por otro tubo más pequeño. El pavimento de la pasarela, que es más estrecho que el propio tablero, dejando sendos espacios vacíos a ambos lados, está formado por una losa de hormigón armado conectada a

Deposição por plasma com arco transferido Hardfacing by plasma transfer arc process

Directory of Open Access Journals (Sweden)

Víctor Vergara Díaz

2010-03-01

Full Text Available Em virtude do Processo de Soldagem Plasma com Alimentação de Pó ter similaridades com o Processo de Soldagem Plasma com Alimentação de Arame, foi realizado um estudo comparativo entre ambos os processos utilizando-se a liga a base de cobalto comercialmente conhecida como Stellite 6, como material de adição na forma de pó e arame. A pesquisa foi realizada com a expectativa de ser aplicada nas operações de revestimentos de superfícies, em especial em pás de turbinas hidráulicas desgastadas por cavitação. A seleção do material de adição a ser empregado depende da natureza do mecanismo de desgaste encontrado. No Labsolda, a liga Stellite 6 vem sendo uma das mais utilizadas, por apresentar uma excelente resistência ao desgaste erosivo por cavitação. Foi avaliada a influência da vazão de gás de plasma a partir dos valores de diluição, dimensões do cordão, dureza e microestrutura. O Processo de Soldagem Plasma com Alimentação de Pó foi o que produziu o melhor acabamento superficial, menor diluição, melhor molhamento e maior largura. Com isto abre-se uma nova perspectiva para revestimentos metálicos e neste contexto se insere a recuperação por soldagem de partes erodidas de turbinas hidráulicas.The Plasma powder transferred arc welding process, which uses feed stock in the powder form, has similarities with Plasma wire transferred arc welding. This work describes a comparative study of the two processes using a Cobalt-based alloy commercially known as Stellite 6. This Co-based alloy is recognized for its superior cavitation erosion resistance. The aim of this work is to investigate the potential of PTA coatings for the protection and refurbishiment hydraulic turbine blades. Coatings were evaluated for the influence of Plasma gas flow rate on coating dilution, geometry, hardness and microstructure. Coatings processed with the atomized Stellite 6 powder feestock showed a superior surface quality, lower dilution

Hot deformation behaviors and processing maps of B{sub 4}C/Al6061 neutron absorber composites

Energy Technology Data Exchange (ETDEWEB)

Li, Yu-Li [School of Materials Science and Engineering, Taiyuan University Of Technology, Taiyuan 030024 (China); Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024 (China); Wang, Wen-Xian, E-mail: Wangwenxian@tyut.edu.cn [School of Materials Science and Engineering, Taiyuan University Of Technology, Taiyuan 030024 (China); Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024 (China); Zhou, Jun [School of Materials Science and Engineering, Taiyuan University Of Technology, Taiyuan 030024 (China); Department of Mechanical Engineering, Pennsylvania State University Erie, The Behrend College, Erie, PA 16563 (United States); Chen, Hong-Sheng [School of Materials Science and Engineering, Taiyuan University Of Technology, Taiyuan 030024 (China); Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024 (China)

2017-02-15

In this study, the hot deformation behaviors of 30 wt.% B{sub 4}C/Al6061 neutron absorber composites (NACs) have been investigated by conducting isothermal compression tests at temperatures ranging from 653 K to 803 K and strain rates from 0.01 to 10 s{sup −1}. It was found that, during hot compression, the B{sub 4}C/Al6061 NACs exhibited a steady flow characteristic which can be expressed by the Zener-Hollomon parameter as a hyperbolic-sine function of flow stress. High average activation energy (185.62 kJ/mol) of B{sub 4}C/Al6061 NACs is noted in current study owing to the high content of B{sub 4}C particle. The optimum hot working conditions for B{sub 4}C/Al6061 NACs are found to be 760–803 K/0.01–0.05 s{sup −1} based on processing map and microstructure evolution. Typical material instabilities are thought to be attributed to void formation, adiabatic shear bands (ASB), particle debonding, and matrix cracking. Finally, the effect of the plastic deformation zones (PDZs) on the microstructure evolution in this 30 wt.% B{sub 4}C/Al6061 composite is found to be very important. - Highlights: •The hot deformation behavior of the 30 wt.% B{sub 4}C/Al6061 NACs was first analyzed. •The 3D efficiency map and the instability map are developed. •The optimum hot working conditions were identified and validated by SEM and TEM. •The hot deformation schematic diagram of 30 wt.% B{sub 4}C/Al6061 NACs is developed.

297. Resultados de la sustitución parcial del arco aórtico con perfusión del tronco braquiocefálico sin parada circulatoria

Directory of Open Access Journals (Sweden)

J.M. González Santos

2012-04-01

Conclusiones: La sustitución parcial del arco es factible sin necesidad de hacer PCHP. Esta técnica acorta los tiempos quirúrgicos y disminuye sus complicaciones, especialmente el daño neurológico y el sangrado postoperatorio.

Integrated FEM-DBEM simulation of crack propagation in AA2024-T3 FSW butt joints considering manufacturing effects

DEFF Research Database (Denmark)

Sonne, Mads Rostgaard; Carlone, P.; Citarella, R.

2015-01-01

This paper deals with a numerical and experimental investigation on the influence of residual stresses on fatigue crack growth in AA2024-T3 friction stir welded butt joints. An integrated FEM-DBEM procedure for the simulation of crack propagation is proposed and discussed. A numerical FEM model...... of the welding process of precipitation hardenable AA2024-T3 aluminum alloy is employed to infer the process induced residual stress field. The reliability of the FEM simulations with respect to the induced residual stresses is assessed comparing numerical outcomes with experimental data obtained by means...

Procedimiento para la obtención de cargas últimas de arcos de perfiles conformados en frío

Directory of Open Access Journals (Sweden)

Cifuentes-Bulté, H.

2015-09-01

Full Text Available This paper deals with a new methodology for the estimation of the strength of circular arches with cold-formed trapezoidal section. These cover elements, mainly subjected to compression stress and with circular curvature should be dimensioned taking into account the possibility of buckling instability. Currently, no standard describes a method for calculating the buckling consideration of curved elements. The methodology proposed herein shares the same philosophy of the European buckling curves method established in the Eurocodes. Thus, an experimental coefficient considering the effects of buckling and geometrical and mechanical imperfections depending on the slenderness of the considered arch have been obtained. For this, it was necessary to determine the experimental strength of at least three arcs, which radius and spans are sufficiently differentiated.En este trabajo se presenta una metodología de cálculo para la determinación de la carga última de arcos circulares con perfiles trapezoidales conformados en frío. Estos elementos de cubierta, sometidos fundamentalmente a esfuerzos de compresión y de directriz curva, deben ser dimensionados teniendo en cuenta la inestabilidad por pandeo. Actualmente, ninguna normativa describe un procedimiento de cálculo para la consideración del pandeo en elementos curvos. La metodología aquí planteada se basa en la filosofía de las curvas europeas de pandeo establecidas en los Eurocódigos. Así, se ha obtenido un coeficiente reductor empírico que considera los efectos del pandeo conjuntamente con imperfecciones geométricas y mecánicas en función de la esbeltez del arco considerado. Para ello, es necesario determinar la carga última experimental de al menos tres arcos, cuyos radios y luces se encuentren lo suficientemente diferenciados.

Anomalias branquiais: revisão de 23 casos

Directory of Open Access Journals (Sweden)

Rogério Aparecido Dedivitis

Full Text Available A anomalia branquial é a doença congênita mais comum vista pelo cirurgião de cabeça e pescoço. Vinte e três pacientes portadores de anomalias branquiais tratados no período de 1994 a 1997 foram revisados. O diagnóstico clínico foi documentado por ultra-sonografia e comprovado pelo exame histopatológico. Encontramos seis anomalias de primeiro arco (26%; 16 do segundo arco (69,5%; e uma do terceiro (4,5%. Não houve anomalia do quarto arco. Após um seguimento que variou de três a 43 meses, não houve caso de recidiva. A prevalência de anomalias do segundo arco é compatível com a literatura, porém, foi alta a incidência do primeiro arco. O emprego da técnica cirúrgica adequada, com a ressecção de todo o trajeto fistuloso, mostrou-se eficaz.

Geocronología y geoquímica isotópica (Sr, Nd) de los granitoides de Pola de Allande (Asturias): ¿Relictos de un arco magmático cadomiense en la Zona Asturoccidental Leonesa?

OpenAIRE

Gutiérrez Alonso, Gabriel; Fernández Suárez, Javier

1998-01-01

[ES] Los granitoides pre-Variscos de Pola de Allande se sitúan en el Antiforme del Narcea, en el límite entre las zonas Cantábrica y Asturoccidental Leonesa de la cadena Varisca Ibérica. Estos granitoides, formados por tonalitas y granodioritas con afinidades geoquímicas de arco magmático, intruyeron en sedimentos siliciclásticos Neoproterozoicos y fueron posteriormente afectados por la deformación tangencial Varisca. La datación U-Pb de circones de dos intrusiones por el método de Ablación L...

Corrosion and nanomechanical behaviors of plasma electrolytic oxidation coated AA7020-T6 aluminum alloy

Energy Technology Data Exchange (ETDEWEB)

Venugopal, A., E-mail: arjun_venu@hotmail.com [Materials and Metallurgy Group, Materials and Mechanical Entity, Vikram Sarabhai Space Centre, Thiruvananthapuram (India); Srinath, J. [Materials and Metallurgy Group, Materials and Mechanical Entity, Vikram Sarabhai Space Centre, Thiruvananthapuram (India); Rama Krishna, L. [International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Balapur P.O., Hyderabad 500005 (India); Ramesh Narayanan, P.; Sharma, S.C.; Venkitakrishnan, P.V. [Materials and Metallurgy Group, Materials and Mechanical Entity, Vikram Sarabhai Space Centre, Thiruvananthapuram (India)

2016-04-13

Alumina coating was deposited on AA7020 aluminum alloy by plasma electrolytic oxidation (PEO) method. The corrosion, stress corrosion cracking (SCC) and nano-mechanical behaviors were examined by means of potentiodynamic polarization, slow strain rate test (SSRT) and nano-indentation tests. Potentiodynamic polarization (PP) was used to evaluate the corrosion resistance of the coating and slow strain rate test (SSRT) was used for evaluating the environmental cracking resistance in 3.5% NaCl solution. The mechanical properties (hardness and elastic modulus) were obtained from each indentation as a function of the penetration depth across the coating cross section. The above results were compared with similar PEO coated aluminum and magnesium alloys. Results indicated that PEO coating on AA7020 alloy significantly improved the corrosion resistance. However the environmental cracking resistance was found to be only marginal. The hardness and elastic modulus values were found to be much higher when compared to the base metal and similar PEO coated 7075 aluminum alloys. The fabricated coating also exhibited good adhesive strength with the substrate similar to other PEO coated aluminum alloys reported in the literature.

Investigations on the influence of the shape factor and friction in compression processes of cylindrical billets of AA 6082-T6 aluminum alloy by numerical and experimental techniques; Investigaciones sobre la influencia del factor de forma y del rozamiento en procesos de compresion de piezas cilindricas de aleacion de aluminio AA 6082-T6 mediante tecnicas numericas y experimentales

Energy Technology Data Exchange (ETDEWEB)

Marin, M. M.; Camacho, A. M.; Bernal, C.; Sebastian, M. A.

2013-09-01

The material characterization under similar load conditions to those applied during manufacturing is important in order to analyse Bulk Forming Compression Processes from a more realistic point of view. Open die forging of AA 6082-T6 aluminum alloy has been analysed by using experimental techniques and Finite Elements Method (FEM). The influence of the work piece geometry on the effects that friction produces in typical process variables such as applied forces, contact pressures and stresses and strains in work pieces has been analysed by FEM simulation. It has been shown that higher shape factors of the initial work piece geometry are recommended in such a way that friction effect is minimised. These results are interesting in order to decrease the required energy of the process and the tool wear, and could be used in further analysis of stamping processes. (Author)

O arco TIG a 100 A e argônio puro é um arco especial? Is the 100-A TIG arc with pure argon special?

Directory of Open Access Journals (Sweden)

Louriel O. Vilarinho

2009-12-01

Full Text Available Partindo da afirmação de que um melhor entendimento dos mecanismos físicos que regem os processos de soldagem pode ser traduzido em maiores níveis de consistência e produtividade destes processos, resta, então, investigar e estudar tais mecanismos. Dentre as diversas abordagens para a caracterização física do processo, o estudo do arco elétrico procura destacar a estabilidade do processo com base nos fenômenos envolvidos. De forma específica para a soldagem a arco, onde alta qualidade é requerida, o processo TIG se destaca. Focando-se mais ainda neste processo, um conjunto de parâmetros chama a atenção: corrente de 100 A e gás de proteção argônio puro. Estes valores atribuem ao arco uma característica especial de transição sob diferentes pontos de vista (característica estática, regime laminar-turbulento, dimensões do arco e queda de tensão anódica. Estas características são apresentadas e discutidas. Espera-se que esta discussão seja lançada como um desafio aos leitores da Revista Soldagem & Inspeção para que contribuam com seus pontos de vista e/ou mais informações, procurando consolidar o conhecimento do arco elétrico em processo não-consumível e que possa, ao final, reverter em resultados tecnológicos para melhor uso do processo.By stating that an improved understanding of the physical mechanisms controlling process performance can usually be translated into higher levels of consistency and productivity for that process, it is expected to investigate these mechanisms. Among the various approaches for process physical characterisation, the electric-arc study unveils the process stability from the related phenomena. Specifically for arc welding, which high quality levels are required, the TIG process outstands. Further looking into this process, a parameter set calls the attention: 100-A current and pure argon as shielding gas. These values attribute to the arc special transitional characteristics, such

INFLUENCE OF MECHANICAL ALLOYING AND LEAD CONTENT ON MICROSTRUCTURE, HARDNESS AND TRIBOLOGICAL BEHAVIOR OF 6061 ALUMINIUM ALLOYS

Directory of Open Access Journals (Sweden)

M. Paidpilli

2017-03-01

Full Text Available In the present work, one batch of prealloyed 6061Al powder was processed by mixing and another one was ball milled with varying amount of lead content (0-15 vol. %. These powders were compacted at 300MPa and sintered at 590˚C under N2. The instrumented hardness and the young’s modulus of as-sintered 6061Al-Pb alloys were examined as a function of lead content and processing route. The wear test under dry sliding condition has been performed at varying loads (10-40 N using pin-on-disc tribometer. The microstructure and worn surfaces have been investigated using SEM to evaluate the change in topographical features due to mechanical alloying and lead content. The mechanically alloyed materials showed improved wear characteristics as compared to as-mixed counterpart alloys. Delamination of 6061Al-Pb alloys decreases up to an optimum lead composition in both as-mixed and ball-milled 6061Al-Pb alloys. The results indicated minimum wear rate for as-mixed and ball-milled 6061Al alloy at 5 and 10 vol. % Pb, respectively.

Investigation of AA2024-T3 surfaces modified by cerium compounds: A localized approach

International Nuclear Information System (INIS)

Paussa, L.; Andreatta, F.; De Felicis, D.; Bemporad, E.; Fedrizzi, L.

2014-01-01

Highlights: •The precipitation of cerium compounds occurs on the entire AA2024-T3 surface. •The matrix is less involved in the cerium precipitation. •Cerium intensely precipitates on Mg-rich IM particles. •The electrochemical behavior of Mg-rich IM particles influences the mechanism of cerium precipitation. -- Abstract: The precipitation of cerium compounds on polished AA2024-T3 surfaces was investigated following an electrochemical and microstructural localized approach. It was found that cerium precipitation occurs on the entire surface covering intermetallic particles and the matrix as well. The matrix is the region where the precipitation of cerium is less favoured. The highest amount of cerium was observed on magnesium-rich intermetallic particles. The localized analyses suggest that precipitation of cerium on magnesium-rich intermetallic particles could happen following two mechanisms: the former based on a potential reversal of the intermetallic particles and the latter due to a partial magnesium dissolution

20 CFR 606.1 - Purpose and scope.

Science.gov (United States)

2010-04-01

... standards for grant of such relief in the form of— (i) A cap on tax credit reduction, (ii) Avoidance of tax... Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR TAX CREDITS UNDER THE FEDERAL UNEMPLOYMENT TAX ACT; ADVANCES UNDER TITLE XII OF THE SOCIAL SECURITY ACT General § 606.1 Purpose...

Alterações tridimensionais dos arcos dentários de pacientes submetidos à cirurgia ortognática

OpenAIRE

Peixoto, Adriano Porto [UNESP

2008-01-01

O tratamento ortodôntico-cirúrgico pode levar a mudanças dimensionais dos arcos dentários nos períodos pré e pós-cirúrgico. Existem poucos estudos bem formulados que procuraram avaliar as mudanças pré e pós-cirúrgicas nas dimensões dos arcos dentários e sua correlação com a estabilidade. Tais mudanças, somente podem ser corretamente avaliadas através de ferramentas tridimensionais. Modelos de gesso dos arcos dentário superior e inferior de pacientes submetidos a tratamento ortodôntico-cirúrgi...

Evaluation of alkaline dissolution of Al 6061 and Al 1050 for the production of Mo-99 from LEU targets

International Nuclear Information System (INIS)

Mindrisz, Ana C.; Camilo, Ruth L.; Araujo, Izilda C.; Forbicini, Christina A.L.G. de O.

2013-01-01

Since 2008, due to the global crisis in the production of radioisotope 99 Mo, which product of decay, 99m Tc, is the tracer element most often used in nuclear medicine and accounts for about 80% of all diagnostic procedures in vivo. Studies on the alkaline dissolution to obtain 9 9M o from irradiated UAl x -Al LEU targets are under development. Processing time should be minimized, considering the short half-life of 99 Mo and 99m Tc, about 66 h and 6 h, respectively. This makes dissolution time a significant factor in the development of the process. This paper presents the results of alkaline dissolution of 'scraps' of Al 6061 and 1050, used to simulate the dissolution process of UAl x -Al targets. Dissolution time and gas releasing were evaluated using the following alkaline solutions: a) NaOH 3 mol.L -1 and NaNO 3 2 mol.L -1 , b) NaOH 3 mol.L -1 and NaNO 3 4 mol.L -1 . The initial temperature of dissolution was 85 deg C in all cases. Al 6061 showed values of dissolution time greater than that for Al 1050, 25% for NaNO 3 2 mol.L -1 and 104.55% for NaNO 3 4 mol.L -1 . The dissolution with NaNO 3 2 mol.L -1 showed that the gas releasing for Al 6061 was 2.7% greater than for Al 1050. However Al 1050 showed that gas releasing 9.92% greater than for Al 6061 during the dissolution with NaNO 3 4 mol.L -1 . The decision about what type of alloy has to be used, Al 1050 or Al 6061, it will be upto the group that will manufacture the targets for the RMB. (author)

Reacciones encadenadas: del reloj de yodo al arco iris químico

Directory of Open Access Journals (Sweden)

Carlos Durán Torres

2011-01-01

Full Text Available Para motivar a los alumnos en el estudio de la química, presentamos una experiencia que llamará su atención y que puede servir para introducir diversos conceptos en el aula. Consiste en encadenar la reacción de reducción del yodato potásico por hidrogenosulfito de sodio en presencia de almidón con otra reacción en la que aparecen disoluciones de indicadores de pH coloreadas al pasar de medio ácido a básico. En siete copas de vidrio que contienen un líquido incoloro, se añade otra disolución también incolora. El contenido de las copas va cambiando brusca y sucesivamente a azul-negro. Al añadir a las copas una tercera disolución, igualmente incolora, desaparece el color oscuro y aparecen los siete colores del arco iris produciendo un vistoso resultado.

Reacciones encadenadas: del reloj de yodo al arco iris químico

Directory of Open Access Journals (Sweden)

Carlos Durán Torres,

2011-01-01

Full Text Available Para motivar a los alumnos en el estudio de la química, presentamos una experiencia que llamará su atención y que puede servir para introducir diversos conceptos en el aula. Consiste en encadenar la reacción de reducción del yodato potásico por hidrogenosulfito de sodio en presencia de almidón con otra reacción en la que aparecendisoluciones de indicadores de pH coloreadas al pasar de medio ácido a básico. En siete copas de vidrio que contienen un líquido incoloro, se añade otra disolución también incolora. El contenido de las copas va cambiando brusca y sucesivamente a azul-negro. Al añadir a las copas una tercera disolución, igualmente incolora, desaparece el color oscuro y aparecen los siete colores del arco iris produciendo un vistoso resultado.

Estimación de la corrosión intergranular en la aleación de magnesio AZ31B soldada por fricción - agitación

Directory of Open Access Journals (Sweden)

Willian Aperador Chaparro

2013-12-01

Full Text Available En este trabajo se evalúa la corrosión intergranular, que se presenta en las soldaduras de la aleación de magnesio AZ31B unidas por los procesos de fricción-agitación y comparada con la soldadura con arco de tungsteno y gas, con el fin de evaluar y comparar el comportamiento a la corrosión de ambas soldaduras por medio la técnica de Espectroscopia de Impedancias Electroquímica. Adicionalmente se realizaron análisis microestructurales de los límites de grano por medio del microscopio. Los resultados obtenidos en esta investigación muestran una mayor resistencia a la corrosión de las muestras obtenidas con el proceso de fricción-agitación.

Wear behaviors of pure aluminum and extruded aluminum alloy (AA2024-T4) under variable vertical loads and linear speeds

Science.gov (United States)

Jung, Jeki; Oak, Jeong-Jung; Kim, Yong-Hwan; Cho, Yi Je; Park, Yong Ho

2017-11-01

The aim of this study was to investigate the transition of wear behavior for pure aluminum and extruded aluminum alloy 2024-T4 (AA2024-T4). The wear test was carried using a ball-on-disc wear testing machine at various vertical loads and linear speeds. The transition of wear behaviors was analyzed based on the microstructure, wear tracks, wear cross-section, and wear debris. The critical wear rates for each material are occurred at lower linear speed for each vertical load. The transition of wear behavior was observed in which abrasion wears with the generation of an oxide layer, fracture of oxide layer, adhesion wear, severe adhesion wear, and the generation of seizure occurred in sequence. In case of the pure aluminum, the change of wear debris occurred in the order of blocky, flake, and needle-like debris. Cutting chip, flake-like, and coarse flake-like debris was occurred in sequence for the extruded AA2024-T4. The transition in the wear behavior of extruded AA2024-T4 occurred slower than in pure aluminum.

Fabrication and tribological response of aluminium 6061 hybrid composite reinforced with bamboo char and boron carbide micro-fillers

Science.gov (United States)

Chethan, K. N.; Pai, Anand; Keni, Laxmikant G.; Singhal, Ashish; Sinha, Shubham

2018-02-01

Metal matrix composites (MMCs) have a wide scope of industrial applications and triumph over conventional materials due to their light weight, higher specific strength, good wear resistance and lower coefficient of thermal expansion. The present study aims at establishing the feasibility of using Bamboo charcoal particulate and boron carbide as reinforcements in Al-6061 alloy matrix and to investigate their effect on the wear of composites taking into consideration the interfacial adhesion of the reinforcements in the alloy. Al-6061 alloy was chosen as a base metallic alloy matrix. Sun-dried bamboo canes were used for charcoal preparation with the aid of a muffle furnace. The carbon content in the charcoal samples was determined by EDS (energy dispersive spectroscopy). In present study, stir casting technique was used to prepare the samples with 1%, 2%, and 3% weight of bamboo charcoal and boron carbide with Al-6061. The fabricated composites were homogenised at 570°C for 6 hours and cooled at room temperature. Wear studies were carried out on the specimens with different speed and loads. It was found that wear rate and coefficient of friction decreased with increase in the reinforcement content.

Bone marrow oedema on MR imaging indicates ARCO stage 3 disease in patients with AVN of the femoral head.

Science.gov (United States)

Meier, Reinhard; Kraus, Tobias M; Schaeffeler, Christoph; Torka, Sebastian; Schlitter, Anna Melissa; Specht, Katja; Haller, Bernhard; Waldt, Simone; Rechl, Hans; Rummeny, Ernst J; Woertler, Klaus

2014-09-01

To test the hypothesis that bone marrow oedema (BME) observed on MRI in patients with avascular necrosis (AVN) of the femoral head represents an indicator of subchondral fracture. Thirty-seven symptomatic hips of 27 consecutive patients (53% women, mean age 49.2) with AVN of the femoral head and associated BME on magnetic resonance (MR) imaging were included. MR findings were correlated with computed tomography (CT) of the hip and confirmed by histopathological examination of the resected femoral head. Imaging studies were analysed by two radiologists with use of the ARCO classification. On MR imaging a fracture line could be identified in 19/37 (51%) cases, which were classified as ARCO stage 3 (n = 15) and stage 4 (n = 4). The remaining 18/37 (49%) cases were classified as ARCO stage 2. However, in all 37/37 (100%) cases a subchondral fracture was identified on CT, indicating ARCO stage 3/4 disease. The extent of subchondral fractures and the femoral head collapse was graded higher on CT as compared to MRI (P AVN, BME of the femoral head represents a secondary sign of subchondral fracture and thus indicates ARCO stage 3 disease. BME on MRI in AVN of femoral head indicates a subchondral fracture. BME in AVN of the femoral head represents ARCO stage 3/4 disease. CT identifies subchondral fractures and femoral head collapse better than MR imaging. This knowledge helps to avoid understaging and to trigger adequate treatment.

Satisfaction, fulfillment of expectations and adherence to subcutaneous biological drugs in patients with rheumatoid arthritis: ARCO study.

Science.gov (United States)

Calvo-Alén, Jaime; Vela, Paloma; Bustabad, Sagrario; Maceiras, Francisco; Carmona, Loreto; Cea-Calvo, Luis

2018-05-15

In the ARCO study, adherence to subcutaneous biological agents by patients with rheumatoid arthritis improved with monthly administration. We assess whether adherence can be related to fulfillment of expectations and satisfaction with treatment. Adherence was assessed by calculating the Medication Possession Ratio, and satisfaction and fulfillment of expectations using the «EXPRESAR» group questionnaire. In 346 patients, those who were satisfied/very satisfied with efficacy and tolerability were ≥80% and 64.4%, with no differences between weekly, biweekly or monthly administration regimens. Regarding the fulfillment of expectations, 59.9% considered the effect of the treatment greater than expected and 52.6% reported lower/much lower than expected discomfort; the latter percentage was higher in patients with monthly administration (P=.049). The percentages for nonadherence were 15.6% (discomfort greater than expected), 18.5% (expected discomfort) and 11.1% (lower than expected or no discomfort) (P=.189). Satisfaction and fulfillment of expectations were high. Fulfillment of expectations of tolerability was better with monthly administration, which could contribute to better adherence. Copyright © 2018 Sociedad Española de Reumatología y Colegio Mexicano de Reumatología. Publicado por Elsevier España, S.L.U. All rights reserved.

An attempt to calibrate and validate a simple ductile failure model against axial-torsion experiments on Al 6061-T651

Energy Technology Data Exchange (ETDEWEB)

Reedlunn, Benjamin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lu, Wei -Yang [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2015-01-01

This report details a work in progress. We have attempted to calibrate and validate a Von Mises plasticity model with the Johnson-Cook failure criterion ( Johnson & Cook , 1985 ) against a set of experiments on various specimens of Al 6061-T651. As will be shown, the effort was not successful, despite considerable attention to detail. When the model was com- pared against axial-torsion experiments on tubes, it over predicted failure by 3 x in tension, and never predicted failure in torsion, even when the tube was twisted by 4 x further than the experiment. While this result is unfortunate, it is not surprising. Ductile failure is not well understood. In future work, we will explore whether more sophisticated material mod- els of plasticity and failure will improve the predictions. Selecting the appropriate advanced material model and interpreting the results of said model are not trivial exercises, so it is worthwhile to fully investigate the behavior of a simple plasticity model before moving on to an anisotropic yield surface or a similarly complicated model.

Aperfeiçoamento da técnica de Soldagem Pontual por Fricção (FSpW para união de poliamida 6 e laminado de poliamida 66 com fibra de carbono

Directory of Open Access Journals (Sweden)

Joel Gonçalves

2014-03-01

Full Text Available A Soldagem Pontual por Fricção ('Friction Spot Welding - FSpW' é uma técnica inovadora que foi desenvolvida e patenteada em 2005 pelo centro de pesquisa alemão Helmholtz Zentrum Geesthacht (HZG. A técnica apresenta ciclos rápidos, baixo custo operacional e gera soldas com alto desempenho mecânico. Foi inicialmente projetada para a soldagem de ligas metálicas leves. A soldagem de polímeros é alvo de pesquisas recentes e a soldagem de compósitos poliméricos por FSpW ainda é inédita. Este estudo demonstrou a viabilidade técnica da soldagem de chapa de poliamida 6 (PA6 e laminado de poliamida 66 e fibra de carbono (CF-PA66 por FSpW. O histórico térmico, o acabamento superficial, a microestrutura da região da solda e a resistência mecânica ao cisalhamento de juntas sobrepostas PA6/CF-PA66 foram investigados. O aumento do tamanho do anel de fixação da ferramenta original, projetada para a soldagem de metais, possibilitou a seleção de parâmetros de soldagem que resultaram em grande aporte térmico, resultando no aumento da área soldada, num menor entalhe (inscrição deixado pela ferramenta na amostra, produzindo melhoria no acabamento superficial da solda. Essa otimização resultou em uma junta PA6/CF-PA66 com resistência ao cisalhamento de 35 MPa (2196 N, com fratura predominante na placa superior de PA6.

An Auger and XPS survey of cerium active corrosion protection for AA2024-T3 aluminum alloy

Energy Technology Data Exchange (ETDEWEB)

Uhart, A. [IPREM-ECP-UMR CNRS 5254, Université de Pau et des Pays de l' Adour, Technopole Hélioparc, 2 Avenue Président Pierre Angot, 64053 Pau Cedex 09 (France); Ledeuil, J.B. [IPREM-ECP-UMR CNRS 5254, Université de Pau et des Pays de l' Adour, Technopole Hélioparc, 2 Avenue Président Pierre Angot, 64053 Pau Cedex 09 (France); Université de Toulouse, UPS-INP-CNRS, Institut Carnot CIRIMAT, 118 Route de Narbonne, 31062 Toulouse Cedex 09 (France); Gonbeau, D. [IPREM-ECP-UMR CNRS 5254, Université de Pau et des Pays de l' Adour, Technopole Hélioparc, 2 Avenue Président Pierre Angot, 64053 Pau Cedex 09 (France); Dupin, J.C., E-mail: dupin@univ-pau.fr [IPREM-ECP-UMR CNRS 5254, Université de Pau et des Pays de l' Adour, Technopole Hélioparc, 2 Avenue Président Pierre Angot, 64053 Pau Cedex 09 (France); Bonino, J.P.; Ansart, F. [Université de Toulouse, UPS-INP-CNRS, Institut Carnot CIRIMAT, 118 Route de Narbonne, 31062 Toulouse Cedex 09 (France); Esteban, J. [Messier-Bugatti-Dowty, Etablissement de Molsheim, 3, rue Antoine de St Exupéry, 67129 Molsheim (France)

2016-12-30

Graphical abstract: Coupled SAM/SEM survey of cerium inhibitor migration towards corrosion pits in a conversion coating over AA2024-T3 substrate. - Highlights: • XPS evidenced the proximity of the inhibitor with the surface AA2024 alloy. • Cerium conversion coatings with [Ce] = 0.1 M offer the best corrosion resistance. • SAM shown the migration of Ce + III entities towards the corrosion pits or crevices. • High resolution analyses (Auger) connecting the nano-scale order with the chemical distribution.

139. Derivación aortoaórtica extraanatómica como opción terapéutica en las hipoplasias complejas de arco aórtico distal

Directory of Open Access Journals (Sweden)

T. Heredia Cambra

2010-01-01

Conclusión: Esta variante técnica se presenta como una alternativa eficaz en el tratamiento de la enfermedad hipoplásica compleja del arco aórtico, con buenos resultados iniciales, a la espera de la evolución a largo plazo.

Synthesis and wear behavior of aluminum 6061 alloy reinforced with carbon nanotubes

Science.gov (United States)

Khalil, Abdullah

In the present work, Al6061 alloy was uniformly reinforced with 0.5, 0.75, 1 and 2 wt. % Carbon Nanotubes (CNTs) using two way dispersion method. For consolidation, Spark Plasma Sintering (SPS) was used which resulted in very high densification for the matrix as well as composite. Results showed that addition of CNTs lead to increased hardness of the material and maximum hardness was found for 1 wt. % CNTs. So this composition was selected for detailed wear analysis. Pin-on-disk wear tests were conducted for the monolithic Al6061 and the composite at a constant speed of 0.5 m/s with varying load from 5 N to 30 N under dry sliding conditions using AISI 4140 steel disk as a counterface. The composite displayed lower wear rate and friction coefficient at lower levels of applied stress (0.175 to 0.525 MPa). Under higher stresses (0.700 to 1.050 MPa), the increased brittleness and porosity of the composite caused severe fracturing and delamination resulting in excessive wear rate and friction coefficient for the composite as compared to monolithic Al6061. The transition from mild to severe wear regime in composite occurred also at lower stress as compared to monolith. Analysis of the worn surfaces revealed abrasion as the dominant wear mechanism for both the materials at lower stresses. At higher stress levels, adhesion was found to be dominant in monolithic Al6061 whereas in composite, excessive sub-surface fracturing and delamination was mainly observed.

Dissimilar metal study on C44300 tube to AA7075 -T651 tube plate with and without thread by FWTPET process

Energy Technology Data Exchange (ETDEWEB)

Radhakrishnan, E.; Kumaraswamidhas, L. A. [Indian Institute of Technology (ISM), Jharkhand (India); Muruganandam, D. [Sri Sairam Engineering College, Tamil Nadu (India); Kumaran, S. Senthil [RVS School of Engineering and Technology, Tamilnadu, (India)

2017-05-15

Friction welding has vital industrial role in fabricating automobiles, aerospace, ship building, heat exchangers using similar, dissimilar and bi-metal of ferrous and non-ferrous metals at mass production level. In this study, admiralty brass C44300 tube and aluminium alloy AA7075 -T651, 6 mm thick tube plate were identified as base metals. Different joint surface area profile of with and without thread of different pitch values was chosen to study the mechanical properties and micro structures of these two base metals. 0.1 mm clearance was maintained between the AA7075-T651 tube plate and C44300 tube outer diameter to make friction welding. Taguchi’s L16 orthogonal array techniques were adopted for identifying the most significant ranking process parameters. Analysis of variance (ANOVA) has been used to analyze the input parameter contribution in terms of percentage. Genetic algorithm (GA) was used to access the suitable input parameter value to obtain effective joint strength in terms of hardness, compressive strength and microstructure formation in the interface of the joint. A Compression test (CT) was conducted to evaluate the level of compressive strength of the joint. Threaded profile pair with higher pitch value proved high compressive strength over unthreaded pair. Micro structure for base metal C44300 tube and AA7075-T651 tube plate, Heat affected zone (HAZ) and Weld zone (WZ) of the joint has been studied. Hardness of base metals, HAZ and WZ was measured by micro Vickers hardness tester and the observation shows that hardness at joint interface has been found to be higher in all pairs.

A.R.C.O.: Fuel rechanging assistant

International Nuclear Information System (INIS)

Anbinder, G.; Calabrese, C.R.; Paz, A.O. de; Moreno, C.A.

1990-01-01

A.R.C.O. is a program whose objective is to assist the fuel strategy of a CANDU 600 nuclear power plant for the task of selecting channels where rechanges occur. The application of this tool implies, as a direct consequence, a notable decrease of the time employed by the professional for the task of selecting channels and, indirectly, a possible improvement of 'burn-up' extraction values and reactivity through channels selection under better conditions to carry out rechanging operations. (Author) [es

Petrologia do Gabro José Fernandes e sua relação temporal com o magmatismo mesozoico toleítico e alcalino no arco de Ponta Grossa 

OpenAIRE

Vidyã Vieira de Almeida

2016-01-01

O Gabro José Fernandes é um corpo com cerca de 3 km², representante do magmatismo alcalino da Província Magmática Paraná-Etendeka na região do Arco de Ponta Grossa. A intrusão está encaixada em rochas metassedimentares proterozoicas do Grupo Votuverava e apresenta considerável variedade litológica definida por rochas gabróicas, em parte cumuláticas, cortadas por diques alcalinos. A intrusão foi datada em 134.93±0.16 Ma pelo método U-Pb TIMS em zircão. Um dique de basalto com alto TiP-Sr apres...

Arco aórtico derecho circunflejo retroesofágico con ligamento arterioso izquierdo: una variedad infrecuente de anillo vascular completo Presentación de un caso

OpenAIRE

Caicedo, Lina M.; Franco, Jaime; López, Carlos F.; Caicedo, Víctor; Núñez, Federico

2012-01-01

Los anillos vasculares pertenecen a un grupo de anomalías congénitas de los arcos aórticos en los que la tráquea y el esófago, o ambos, están completamente rodeados por estructuras vasculares. Con frecuencia pueden causar obstrucción y, en consecuencia, alteración de la deglución y dificultad respiratoria, por lo cual deben incluirse en el diagnóstico diferencial de obstrucción de la vía aérea superior. El diagnóstico temprano y la liberación quirúrgica oportuna de la obstrucción de la vía aé...

Inhibitive Behaviour of Corrosion of Aluminium Alloy in NaCl by Mangrove Tannin

International Nuclear Information System (INIS)

Solhan Yahya; Afidah Abdul Rahim; Affaizza Mohd Shah; Rohana Adnan

2011-01-01

Anticorrosion potential of mangrove tannins on aluminium alloys AA6061 in NaCl solution has been studied using potentiodynamic polarisation method and scanning electron microscopy (SEM). The study was carried out in different pH of corrosive medium in the absence and presence of various concentrations of tannin. The corrosion inhibition behaviour of the mangrove tannin on AA6061 aluminium alloy corrosion was found to be dependant on the pH of NaCl solution. Our results showed that the inhibition efficiency increased with increasing tannins concentration in chloride solution at pH 6. Treatment of aluminium alloy 6061 with all concentrations of mangrove tannins reduced the current density, thus decreased the corrosion rate. Tannins behaved as mixed inhibitors at pH 6 and reduction in current density predominantly affected in cathodic reaction. Meanwhile, at pH 12, addition of tannins shifted the corrosion potential to more cathodic potentials and a passivating effect was observed in anodic potentials. SEM studies have shown that the addition of tannins in chloride solution at pH 12 reduced the surface degradation and the formation of pits. (author)

Estudo da emissão de raios infravermelho próximo em processos de soldagem a arco Study of near-infrared emission on processes of arc welding

Directory of Open Access Journals (Sweden)

Carolina Pimenta Mota

2011-03-01

Full Text Available O estudo de boa parte dos fenômenos envolvidos no processo de soldagem necessita de auxílio visual e a luminosidade emitida pelo arco pode representar uma grande barreira. Uma das formas utilizadas atualmente para se obter a visualização do processo, sem a interferência do arco, consiste em iluminar o processo com o infravermelho próximo e utilizar filtros durante a aquisição das imagens. Assim, é importante investigar o comportamento do arco de soldagem em relação à sua emissão luminosa no espectro infravermelho. Desta forma, a proposta deste trabalho foi a realização de um estudo comparativo entre a emissão do arco de soldagem de radiação infravermelha próxima em dois processos largamente utilizados, TIG e MIG/MAG, focando também sua influência por parâmetros como a corrente de soldagem e a proteção gasosa utilizada. Com o uso de um sensor de luminosidade e a utilização de um sistema de lentes ópticas, foram realizados experimentos, adquirindo o espectro luminoso emitido pelo arco voltaico. Através dos resultados obtidos, ou seja, do valor numérico de energia luminosa do arco de soldagem (integração do espectro é possível se obter, com a utilização desta mesma metodologia, a energia luminosa no infravermelho próximo e, consequentemente, a intensidade luminosa, necessária para a sobreposição do arco durante a aquisição de imagens.Most of the phenomenon studied in the welding processes needs a vision system and the arc light emission can create a great barrier. Nowadays, one of the techniques used for visualizing the process, without arc interference, is the illumination of the process with near-infrared laser and the use of optic filters during the image acquisition. Thus, it is important to investigate the welding arc behavior in respect to its light emission within the near-infrared spectrum. Therefore, this work aims to perform a comparative study of the arc near infrared emission in one of the two

Rapidly solidified aluminium for optical applications

NARCIS (Netherlands)

Gubbels, G.P.H.; Venrooy, B.W.H. van; Bosch, A.J.; Senden, R.

2008-01-01

This paper present the results of a diamond turning study of a rapidly solidified aluminium 6061 alloy grade, known as RSA6061. It is shown that this small grain material can be diamond turned to smaller roughness values than standard AA6061 aluminium grades. Also, the results are nearly as good as

Microstructure Stability During Creep of Friction Stir Welded AA2024-T3 Alloy

Science.gov (United States)

Regev, Michael; Rashkovsky, Tal; Cabibbo, Marcello; Spigarelli, Stefano

2018-01-01

The poor weldability of the AA2024 aluminum alloy limits its use in industrial applications. Because friction stir welding (FSW) is a non-fusion welding process, it seems to be a promising solution for welding this alloy. In the current study, FSW was applied to butt weld AA2024-T3 aluminum alloy plates. Creep tests were conducted at 250 and at 315 °C on both the parent material and the friction stir welded specimens. The microstructures of the welded and non-welded AA2024-T3 specimens before and after the creep tests were studied and compared. A comprehensive transmission electron microscopy study together with a high-resolution scanning electron microscopy study and energy-dispersive x-ray spectroscopy analysis was conducted to investigate the microstructure stability. The parent material seems to contain two kinds of Cu-rich precipitates—coarse precipitates of a few microns each and uniformly dispersed fine nanosized precipitates. Unlike the parent material, the crept specimens were found to contain the two kinds of precipitates mentioned above together with platelet-like precipitates. In addition, extensive decoration of the grain boundaries with precipitates was clearly observed in the crept specimens. Controlled aging experiments for up to 280 h at the relevant temperatures were conducted on both the parent material and the welded specimens in order to isolate the contribution of exposure to high temperatures to the microstructure changes. TEM study showed the development of dislocation networks into a cellular dislocation structure in the case of the parent metal. Changes in the dislocation structure as a function of the creep strain and the FSW process were recorded. A detailed creep data analysis was conducted, taking into account the instability of the microstructure.

Corrosion protection and delamination mechanism of epoxy/carbon black nanocomposite coating on AA2024-T3

NARCIS (Netherlands)

Foyet, A.; Wu, T.H.; Kodentsov, A.; Ven, van der L.G.J.; With, de G.; Benthem, van R.A.T.M.

2013-01-01

The barrier property of a nanocomposite epoxy coating containing 1 or 1.25 vol% of carbon black (CB) applied on AA2024-T3 was investigated by using electrochemical impedance spectroscopy. Micro-electrochemical impedance spectroscopy and optical microscopy were also used to investigate the

Bone marrow oedema on MR imaging indicates ARCO stage 3 disease in patients with AVN of the femoral head

Energy Technology Data Exchange (ETDEWEB)

Meier, Reinhard; Schaeffeler, Christoph; Waldt, Simone; Rummeny, Ernst J.; Woertler, Klaus [Klinikum rechts der Isar, Technische Universitaet Muenchen, Department of Diagnostic and Interventional Radiology, Munich (Germany); Kraus, Tobias M. [Klinikum rechts der Isar, Technische Universitaet Muenchen, Department of Orthopaedics, Munich (Germany); Berufsgenossenschaftliche Unfallklinik Tuebingen, Department of Trauma and Orthopaedics, Tuebingen (Germany); Torka, Sebastian [Klinikum rechts der Isar, Technische Universitaet Muenchen, Department of Orthopaedics, Munich (Germany); Berufsgenossenschaftliche Unfallklinik Murnau, Department of Trauma and Orthopaedics, Murnau (Germany); Schlitter, Anna Melissa; Specht, Katja [Klinikum rechts der Isar, Technische Universitaet Muenchen, Institute of Pathology, Munich (Germany); Haller, Bernhard [Klinikum rechts der Isar, Technische Universitaet Muenchen, Institute of Medical Statistics and Epidemiology, Munich (Germany); Rechl, Hans [Klinikum rechts der Isar, Technische Universitaet Muenchen, Department of Orthopaedics, Munich (Germany)

2014-09-15

To test the hypothesis that bone marrow oedema (BME) observed on MRI in patients with avascular necrosis (AVN) of the femoral head represents an indicator of subchondral fracture. Thirty-seven symptomatic hips of 27 consecutive patients (53 % women, mean age 49.2) with AVN of the femoral head and associated BME on magnetic resonance (MR) imaging were included. MR findings were correlated with computed tomography (CT) of the hip and confirmed by histopathological examination of the resected femoral head. Imaging studies were analysed by two radiologists with use of the ARCO classification. On MR imaging a fracture line could be identified in 19/37 (51 %) cases, which were classified as ARCO stage 3 (n = 15) and stage 4 (n = 4). The remaining 18/37 (49 %) cases were classified as ARCO stage 2. However, in all 37/37 (100 %) cases a subchondral fracture was identified on CT, indicating ARCO stage 3/4 disease. The extent of subchondral fractures and the femoral head collapse was graded higher on CT as compared to MRI (P < 0.05). Histopathological analysis confirmed bone necrosis and subchondral fractures. In patients with AVN, BME of the femoral head represents a secondary sign of subchondral fracture and thus indicates ARCO stage 3 disease. circle BME on MRI in AVN of femoral head indicates a subchondral fracture. (orig.)

Bone marrow oedema on MR imaging indicates ARCO stage 3 disease in patients with AVN of the femoral head

International Nuclear Information System (INIS)

Meier, Reinhard; Schaeffeler, Christoph; Waldt, Simone; Rummeny, Ernst J.; Woertler, Klaus; Kraus, Tobias M.; Torka, Sebastian; Schlitter, Anna Melissa; Specht, Katja; Haller, Bernhard; Rechl, Hans

2014-01-01

To test the hypothesis that bone marrow oedema (BME) observed on MRI in patients with avascular necrosis (AVN) of the femoral head represents an indicator of subchondral fracture. Thirty-seven symptomatic hips of 27 consecutive patients (53 % women, mean age 49.2) with AVN of the femoral head and associated BME on magnetic resonance (MR) imaging were included. MR findings were correlated with computed tomography (CT) of the hip and confirmed by histopathological examination of the resected femoral head. Imaging studies were analysed by two radiologists with use of the ARCO classification. On MR imaging a fracture line could be identified in 19/37 (51 %) cases, which were classified as ARCO stage 3 (n = 15) and stage 4 (n = 4). The remaining 18/37 (49 %) cases were classified as ARCO stage 2. However, in all 37/37 (100 %) cases a subchondral fracture was identified on CT, indicating ARCO stage 3/4 disease. The extent of subchondral fractures and the femoral head collapse was graded higher on CT as compared to MRI (P < 0.05). Histopathological analysis confirmed bone necrosis and subchondral fractures. In patients with AVN, BME of the femoral head represents a secondary sign of subchondral fracture and thus indicates ARCO stage 3 disease. circle BME on MRI in AVN of femoral head indicates a subchondral fracture. (orig.)

Los niveles de anticuerpos anti factor plaquetario 4-heparina y el índice 4T para trombocitopenia inducida por heparina

Directory of Open Access Journals (Sweden)

Marta E. Martinuzzo

2012-02-01

Full Text Available La trombocitopenia inducida por heparina (HIT es un efecto adverso del tratamiento con heparina, mediada por anticuerpos anti complejo factor plaquetario 4 (PF4-heparina (HPIA. La HIT es frecuentemente moderada pero pueden desarrollarse complicaciones trombóticas. El diagnóstico precoz es importante. La detección de HPIA por ELISA tiene alta sensibilidad pero baja especificidad (títulos bajos sin significación clínica. El índice de las 4T (índice 4T puede detectar pacientes con alto riesgo de HIT. El propósito del estudio fue correlacionar los niveles de HPIA y el índice 4T de un grupo de pacientes derivados a nuestro centro. Evaluamos 84 pacientes, 34 de ellos desarrollaron trombosis. Cada médico completó un cuestionario clínico que fue remitido con la muestra a nuestro centro. Los cuestionarios fueron analizados por un investigador externo y el índice 4T se calculó previamente al ensayo. Los HPIA se determinaron por un ELISA (Asserachrom HPIA que detecta los 3 isotipos, IgG, IgM e IgA, único reactivo disponible en Argentina. Los resultados se expresaron como porcentaje de absorbancia (%ABS. La correlación del índice 4T con los HPIA fue 0.472 (rho spearman, p < 0.001. Los pacientes con índice 4T ≥ 6 presentaban %ABS mayores que los ≤ 5 (67 vs. 39, p < 0.001. Aquéllos con trombosis presentaron títulos mayores que los que no la desarrollaron (%ABS 59 vs. 39, p = 0.017. En conclusión: Los títulos altos de HPIA medidos por ELISA, que detecta los 3 isotipos, correlacionaron claramente con el índice 4T ≥ 6 y fueron más frecuentes en los pacientes con trombosis, coincidiendo con lo ya descripto para ensayos de ELISA específicos para isotipo IgG.

Synthesis and Characterization of Hybrid Silica-Zirconia Coatings with Cerium Inhibitor on Aluminum 6061

Directory of Open Access Journals (Sweden)

M. Bahrami

2016-12-01

Full Text Available Organic–inorganic hybrid coatings were prepared by sol–gel method and deposited on aluminum alloy 6061. Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR spectroscopy and Scanning Electron Microscopy (SEM were used for structural study of the hybrid coatings. Adhesive strength of sol–gel coatings to the substrate was evaluated quantitatively and qualitatively. Corrosion behavior of the samples was studied by cyclic potentiodynamic and linear polarization tests. Results showed that adhesion strength of the coatings to the substrates was increased with increasing tetrapropoxide of zirconium (TPOZ and cerium content. Corrosion tests showed that corrosion current density of coated samples were decreased three to seven orders of magnitude in comparison with uncoated aluminum alloy 6061. Decreasing in corrosion current density and increasing in polarization resistance was observed by increasing zirconia and cerium content. Unlike the uncoated aluminum alloy 6061, the crack-free coatings did not show pitting tendency. 

Utilização da safena magna in situ para arterialização do arco venoso do pé The great saphenous vein in situ for the arterialization of the venous arch of the foot

Directory of Open Access Journals (Sweden)

Cesar Roberto Busato

2010-09-01

Full Text Available CONTEXTO: O tratamento da isquemia crítica de membros inferiores sem leito arterial distal pode ser realizado por meio da inversão do fluxo no arco venoso do pé. OBJETIVO: O objetivo deste trabalho foi apresentar a técnica e os resultados obtidos com a arterialização do arco venoso do pé, mantendo a safena magna in situ. MÉTODOS: Dezoito pacientes, dos quais 11 com aterosclerose (AO, 6 com tromboangeíte obliterante (TO e 1 com trombose de aneurisma de artéria poplítea (TA foram submetidos ao método. A safena magna in situ foi anastomosada à melhor artéria doadora. O fluxo arterial derivado para o sistema venoso progride por meio da veia cujas válvulas são destruídas. As colaterais da veia safena magna são ligadas desde a anastomose até o maléolo medial, a partir do qual são preservadas. RESULTADOS: Dos pacientes, 10 (55,6% mantiveram suas extremidades, 5 com AO e 5 com TO; 7 (38,9% foram amputados, 5 com AO, 1 com TO e 1 com Ta; houve 1 óbito (5,5%. CONCLUSÃO: A inversão do fluxo arterial no sistema venoso do pé deve ser considerada para salvamento de extremidade com isquemia crítica sem leito arterial distal.BACKGROUND: Critical lower limb ischemia in the absence of a distal arterial bed can be treated by arterialization of the venous arch of the foot. OBJETIVE: The objective of this paper was to present the technique and the results of the arterialization of the venous arch of the foot with the in situ great saphenous vein. METHODS: Eighteen patients, 11 with atherosclerosis (AO, 6 with thromboangiitis obliterans (TO and 1 with popliteal artery aneurysm thrombosis were submitted to venous arch arterialization. The in situ great saphenous vein was anastomosed to the best donor artery. Arterial flow derived from the venous system progresses through the vein whose valves were destroyed. The collateral vessels of the great saphenous vein are linked from the anastomosis to the medial malleolus and preserved from this point

Machinability of Al 6061 Deposited with Cold Spray Additive Manufacturing

Science.gov (United States)

Aldwell, Barry; Kelly, Elaine; Wall, Ronan; Amaldi, Andrea; O'Donnell, Garret E.; Lupoi, Rocco

2017-10-01

Additive manufacturing techniques such as cold spray are translating from research laboratories into more mainstream high-end production systems. Similar to many additive processes, finishing still depends on removal processes. This research presents the results from investigations into aspects of the machinability of aluminum 6061 tubes manufactured with cold spray. Through the analysis of cutting forces and observations on chip formation and surface morphology, the effect of cutting speed, feed rate, and heat treatment was quantified, for both cold-sprayed and bulk aluminum 6061. High-speed video of chip formation shows changes in chip form for varying material and heat treatment, which is supported by the force data and quantitative imaging of the machined surface. The results shown in this paper demonstrate that parameters involved in cold spray directly impact on machinability and therefore have implications for machining parameters and strategy.

Comparação da Estabilidade do Arco e da Variabilidade da Geometria de Soldas obtidas pelos Processos MIG/MAG e Arame Tubular

Directory of Open Access Journals (Sweden)

Romário Mauricio Urbanetto Nogueira

2015-06-01

Full Text Available ResumoApesar da similaridade, os processos MIG/MAG e Eletrodo Tubular apresentam particularidades quanto à estabilidade do arco e variabilidade nas características dos cordões. Assim, a escolha de um dos processos, para aplicação específica deveria considerar como tais particularidades afetam a qualidade destas soldas. Para subsidiar esta escolha, o presente estudo teve como objetivo investigar como a mudança na corrente média afeta a estabilidade e a regularidade das transferências de metal em soldas realizadas com tensão constante e corrente pulsada e comparar a variabilidade da geometria e da diluição destas soldas. Para atingir estes objetivos foram realizadas soldas automatizadas, tendo como metal de base o aço ABNT 1020 e como metais de adição o arame AWS ER70S-6 e AWS E71T-1. Além das soldas com variação da corrente média, os testes envolveram a determinação dos parâmetros para a ocorrência de transferência estável por curto-circuito, goticular e pulsado. Os resultados mostraram que a tensão que determina a maior estabilidade na transferência pelo modo curto-circuito, independe da velocidade de soldagem e aumenta com a velocidade do arame, mostraram também que as soldas com arame tubular apresentaram maiores variabilidades comparadas ao arame maciço.

Effect of supplementation of arachidonic acid (AA) or a combination of AA plus docosahexaenoic acid on breastmilk fatty acid composition

NARCIS (Netherlands)

Smit, EN; Koopmann, M; Boersma, ER; Muskiet, FAJ

We investigated whether supplementation with arachidonic acid (20:4 omega 6; AA), ora combination of AA and docosahexaenoic acid (22:6 omega 3; DHA) would affect human milk polyunsaturated fatty acid (PUFA) composition. Ten women were daily supplemented with 300 mg AA, eight with 300 mg AA, 110 mg

Equal channel angular pressing of powder processed Al6061/SiC nano metal matrix composites and study of its wear properties

Science.gov (United States)

Bongale, Arunkumar M.; Kumar, Satish

2018-03-01

Nano Metal Matrix Composites were fabricated by a novel approach by combining powder metallurgy and equal channel angular pressing (ECAP) using aluminium alloy 6061 (Al6061) as matrix phase and 2, 4 and 6 wt% of silicon carbide nanoparticles (SiCnp) as reinforcements. Alloying elements of Al6061 in their elemental form are blended together using high energy planetary ball mill and calculated wt% of SiCnp were mixed with it. Thus formed composite powder mixture is compacted in a uniaxial compaction die and then subjected to ECAP up to three passes. Density and porosity of samples were estimated using Archimedes’ principle. Pin on disc setup is used to evaluate the wear properties of the composites under different speed and loading conditions. Tests revealed that increase in wt% of SiCnp reduces the wear rate of the composites whereas increasing the load and speed increases wear rate of the composite samples. SEM micrographs of worn surfaces indicated different types of wear mechanism responsible for wear of the specimens under different testing conditions. Also, wt% of SiCnp and the number of passes through ECAP were found to increase the hardness value of the composite material.

Aa ranna veerele kavandatakse kuni 60 elamuga asumit / Külli Kriis

Index Scriptorium Estoniae

Kriis, Külli, 1961-

2007-01-01

Ilmunud ka: Severnoje Poberezhje, 6. juuli 2007, lk. 1,4. Lüganuse vallavalitsuses ja kohalikes elanikes tekitavad OÜ Eesti Era kavandatavad elamud Aa külla vastuseisu ranna läheduse, juurdepääsu ning veevarustuse ja kanalisatsiooniprobleemide tõttu

The effect of welding parameters on the corrosion behaviour of friction stir welded AA2024-T351

DEFF Research Database (Denmark)

Jariyaboon, M; Davenport, A.J.; Ambat, Rajan

2007-01-01

The effect of welding parameters (rotation speed and travel speed) on the corrosion behaviour of friction stir welds in the high strength aluminium alloy AA2024-T351 was investigated. It was found that rotation speed plays a major role in controlling the location of corrosion attack. Localised...... intergranular attack was observed in the nugget region for low rotation speed welds, whereas for higher rotation speed welds, attack occurred predominantly in the heat-affected zone. The increase in anodic reactivity in the weld zone was due to the sensitisation of the grain boundaries leading to intergranular...... attack. Enhancement of cathodic reactivity was also found in the nugget as a result of the precipitation of S-phase. The results were compared with samples of AA2024-T351 that had been heat treated to simulate the thermal cycle associated with welding, and with samples that had been exposed to high...

Avaliação do espaço adicional requerido no perímetro do arco inferior para o nivelamento da curva de Spee Assessment of the additional lower arch perimeter needed for leveling the curve of Spee

Directory of Open Access Journals (Sweden)

Marcio José da Silva Campos

2009-08-01

Full Text Available OBJETIVO: determinar o perímetro de arco adicional necessário para o nivelamento da curva de Spee através de uma técnica laboratorial em modelos de estudo. MÉTODOS: foram utilizados 70 modelos inferiores nos quais se mediu a profundidade da curva de Spee e o perímetro do arco (de segundo molar a segundo molar. Nos mesmos modelos, após a simulação do nivelamento da curva de Spee, o perímetro de arco foi novamente avaliado, mantendo sua forma e comprimento. RESULTADOS: foi confirmada a correlação entre a profundidade da curva de Spee e o perímetro de arco adicional, sendo deduzida a fórmula [Paa = 0,21 CSmax - 0,04]. CONCLUSÃO: a técnica proposta permitiu, através da avaliação do perímetro de arco com curva de Spee nivelada, a determinação do espaço disponível para o alinhamento dentário.AIM: To determine the additional arch perimeter needed for leveling the curve of Spee by means of a laboratory technique using dental casts. METHODS: Seventy lower dental models were used for measuring the depth of the curve of Spee and assessing the arch perimeter from second molar to second molar. In these dental casts, after simulation of leveling the curve of Spee, arch perimeter was reevaluated, after maintaining its form and length. RESULTS: The correlation between the depth of the curve of Spee and the additional arch perimeter was ratified, as can be shown by the formula [Paa = 0,21 CSmax - 0,04]. CONCLUSION: The proposed technique allowed, through the assessment of the arch perimeter with the leveled curve of Spee, the determination of the space available for tooth alignment.

Studies on mechanical properties of aluminium 6061 reinforced with titanium and E glass fibre metal matrix hybrid composites

Science.gov (United States)

Kumar, B. N. Ravi; Vidyasagar, H. N.; Shivanand, H. K.

2018-04-01

2Development of the mmc with fibers and filler materials as a replacement material for some engineering purpose such as automobiles, aerospace are indispensable. Therefore, the studies related to hybrid mmc's of Al6061 were noted in this paper. In this work, Al6061 reinforced with E glass fibers and micro Titanium particles. Hybrid composites was prepared by very feasible and commercially used technique Stir casting and by varying composition of Al6061, Titanium and E-glass fibre. Experiments were done by varying weight fraction of Titanium (0%, 1%, 3% and 5%) and E glass fibre (0%, 1%, 3% and 5%). Wire EDM were used to prepare the specimens required for tensile and hardness according to standards and tests conducted. The proportion of elements which are present the mmc's are identified by EDAX. Optical microscopy were conducted by SU3500 machine Scanning Electron Microscope and Microstructure shows the distribution of reinforced Ti particles and E glass fibres. The characterization of Al6061 hybrid mmc's is having significant impact on the mechanical properties.

Pressureless infiltration of porous Al2O3 preform in molten 6061 commercial aluminium alloy

International Nuclear Information System (INIS)

Marin, J.; Olivares, L.; Moreno, C.; Ordonez, S.; Martinez, V.

2001-01-01

This paper presents an infiltration study of Al 2 O 3 samples containing, approximately, 40% of pores with 1μ average radios. These samples were totally infiltrated with Al-6061 at 1100 deg C for 24 hs in air. Microstructural analysis showed the presence of an alumina matrix infiltrated through mechanisms that combine reactive processes and capillarity, and thus being coherent with the presence of open and closed porosity. The metallographic analysis showed open porosity infiltrated with Al-6061 by capillarity, while SEM micrographs corresponding to this system also showed closed pores filled with metal, that was transported into the ceramic matrix through a reactivate infiltration mechanism. The EDAX analysis for the Al 2 O 3 /Al 6061 system showed areas rich in silicon and copper at the metal-ceramic interface, while the ceramic phase showed the presence of Mg. XRD identified the presence of the MgAl 2 O 4 spinel in the ceramic phase

Experimental transmission of AA amyloidosis by injecting the AA amyloid protein into interleukin-1 receptor antagonist knockout (IL-1raKO) mice.

Science.gov (United States)

Watanabe, K; Uchida, K; Chambers, J K; Tei, M; Shoji, A; Ushio, N; Nakayama, H

2015-05-01

The incidence of AA amyloidosis is high in humans with rheumatoid arthritis and several animal species, including cats and cattle with prolonged inflammation. AA amyloidosis can be experimentally induced in mice using severe inflammatory stimuli and a coinjection of AA amyloid; however, difficulties have been associated with transmitting AA amyloidosis to a different animal species, and this has been attributed to the "species barrier." The interleukin-1 receptor antagonist knockout (IL-1raKO) mouse, a rodent model of human rheumatoid arthritis, has been used in the transmission of AA amyloid. When IL-1raKO and BALB/c mice were intraperitoneally injected with mouse AA amyloid together with a subcutaneous pretreatment of 2% AgNO3, all mice from both strains that were injected with crude or purified murine AA amyloid developed AA amyloidosis. However, the amyloid index, which was determined by the intensity of AA amyloid deposition, was significantly higher in IL-1raKO mice than in BALB/c mice. When IL-1raKO and BALB/c mice were injected with crude or purified bovine AA amyloid together with the pretreatment, 83% (5/6 cases) and 38% (3/8 cases) of IL-1raKO mice and 17% (1/6 cases) and 0% (0/6 cases) of BALB/c mice, respectively, developed AA amyloidosis. Similarly, when IL-1raKO and BALB/c mice were injected with crude or purified feline AA amyloid, 33% (2/6 cases) and 88% (7/8 cases) of IL-1raKO mice and 0% (0/6 cases) and 29% (2/6 cases) of BALB/c mice, respectively, developed AA amyloidosis. These results indicated that IL-1raKO mice are a useful animal model for investigating AA amyloidogenesis. © The Author(s) 2014.

Differences in clinical outcome between docetaxel and abiraterone acetate as the first-line treatment in chemo-naïve metastatic castration-resistant prostate cancer patients with or without the ineligible clinical factors of the COU-AA-302 study.

Science.gov (United States)

Poon, Darren M C; Chan, Kuen; Lee, Siu H; Chan, Tim W; Sze, Henry; Lee, Eric K C; Lam, Daisy; Chan, Michelle F T

2018-03-01

This study aimed to compare the efficacy of abiraterone acetate (AA) versus docetaxel (T) as first-line treatment in chemo-naïve metastatic castration-resistant prostate cancer (mCRPC) patients with or without the ineligible factors of the COU-AA-302 study (presence of visceral metastases, symptomatic disease, and/or Eastern Cooperative Oncology Group performance status ≥ 2). The clinical records of chemo-naïve mCRPC patients who received AA in six public oncology centers or T in two of these centers between 2003 and 2014 were reviewed. The survival time was compared among four subgroups of patients: those with ineligible factors administered AA (Group Ineligible-AA) or T (Group Ineligible-T), and those without ineligible factors and administered AA (Group Eligible-AA) or T (Group Eligible-T). During the study period, we identified 115 mCRPC patients who received AA or T, among whom 29, 36, 29, and 21 patients were classified as Groups Ineligible-AA, Ineligible-T, Eligible-AA, and Eligible-T, respectively. Both Group Ineligible-AA and Group Eligible-AA had significantly longer progression-free survival (PFS) and similar overall survival (OS) as Group Ineligible-T and Group Eligible-T (Ineligible, PFS: 6.3 vs. 5.9 months, P  = 0.0234, OS: 7.8 vs. 15.7 months, P  = 0.1601; Eligible, PFS: 9.8 vs. 5.6 months, P  = 0.0437, OS: 20.5 vs. 18.2 months, P  = 0.7820). Compared to T, AA treatment resulted in longer PFS and similar OS in chemo-naïve mCRPC patients, irrespective of the presence of ineligible factors, suggesting that the initial treatment by AA may still be beneficial to those with the aforementioned ineligible factors.

Corrosion of Graphite Aluminum Metal Matrix Composites

Science.gov (United States)

1991-02-01

cathodic protection of G/AI MMCs resulted in overprotection 13. Overprotection resulted from a local increase in pH near cathodic sites during...34Cathodic Overprotection of SiC/6061-T6 and G/6061- T6 Aluminum Alloy Metal Matrix Composites," Scripta Metallurgica, 22 (1988) 413-418. 14. R

Anodic galvanostatic polarization of AA2024-T3 aircraft alloy in conventional mineral acids

Energy Technology Data Exchange (ETDEWEB)

Kozhukharov, S., E-mail: stephko1980@abv.bg [Department of Chemical Sciences, University of Chemical Technology and Metallurgy, 8 “Kliment Okhridski” Blvd, 1756, Sofia (Bulgaria); Girginov, Ch. [Department of Chemical Sciences, University of Chemical Technology and Metallurgy, 8 “Kliment Okhridski” Blvd, 1756, Sofia (Bulgaria); Avramova, I. [Institute of General and Inorganic Chemistry, Bulgarian Academy of Science, 11 “Georgi Bonchev” Str., 1113, Sofia (Bulgaria); Machkova, M. [Department of Chemical Sciences, University of Chemical Technology and Metallurgy, 8 “Kliment Okhridski” Blvd, 1756, Sofia (Bulgaria)

2016-09-01

The present study is devoted to the determination of the impact of the anodization of AA2024-T3 alloys in HCl, HNO{sub 3}, H{sub 2}SO{sub 4} or H{sub 3}PO{sub 4} on the samples’ surface morphology and properties. Subsequent systematic assessments were performed by Scanning Electron Microscopy (SEM), Energy Dispersion X-Ray Spectroscopy (EDX) and X-ray Photoelectron Spectroscopy (XPS). These observations were combined with Linear Voltammetry (LVA) and Electrochemical Impedance Spectroscopy (EIS) after 48 and 168 h of exposure to a 3.5% NaCl model corrosive medium. The main result is, that completely different effects were observed in accordance to the acid used. It was established that the monoprotonic acids have a deep destructive effect due to dissolution of the alloy components, whereas the polyprotonic ones possess either indistinguishable influence, or surface film formation. - Highlights: • AA2024 was polarized anodically in 15%{sub wt} acid solutions at 15 mA cm{sup −2} for 2 h. • Four mineral acids were selected for investigation: HCl, HNO{sub 3}, H{sub 2}SO{sub 4} and H{sub 3}PO{sub 4}. • SEM, EDX and XPS were applied for morphological description. • Electrochemical characterizations were performed by EIS and linear voltammetry. • The acid used predetermines completely different interaction with the AA2024 alloy.

Treatment by (N H{sub 4}){sub 2} Si F{sub 6} of hydrothermally stabilized Y zeolite: NMR, infrared and atomic absorption monitoring; Tratamento por (NH4){sub 2} SiF{sub 6} de zeolito Y estabilizado hidrotermicamente: monitoramento por RMN, IV e A.A

Energy Technology Data Exchange (ETDEWEB)

Martins, Ruth L; Camorim, Vera L.D.D.; Menezes, Sonia M.C. de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

1992-12-31

The kinetics of NFA leaching of a hydrothermal treated Y zeolite was determined by using AAS, IR and NMR techniques. It was observed first order with respect to NFA onto intra crystalline volume. The transformation of octahedral Aluminium into mainly tetrahedral species was observed at the first contact with the fluorinated reagent,being leached as NM{sub 4} Al F{sub 4} and, in a less amount, as (N H{sub 4}){sub 3} Al F{sub 6}. (author) 4 refs., 5 figs., 1 tab.

Determinação direta de elementos potencialmente tóxicos em arroz por GF AAS: desenvolvimento de métodos e aplicações

OpenAIRE

Daniel Menezes Silvestre

2013-01-01

O arroz é um dos alimentos mais consumidos no mundo, caracterizando-se como a base da alimentação para mais da metade da população mundial. De acordo com a Organização Mundial da Saúde (WHO), a ingestão de alimentos contaminados é uma das principais vias de absorção de elementos potencialmente tóxicos pelo ser humano. Por esse motivo, órgãos de fiscalização têm estabelecidos limites máximos permitidos desse tipo de elemento nos alimentos. Nesse sentido, o desenvolvimento de métodos e aplicaçõ...

Cerebral biopsy: comparison between frame-based stereotaxy and neuronavigation in an oncology center Biópsia cerebral: comparação entre estereotaxia com arco e neuronavegação em um centro de oncologia

Directory of Open Access Journals (Sweden)

Carlos Augusto Ferreira Lobão

2009-09-01

Full Text Available Treatment of intracranial tumoral lesions is related to its correct histological diagnostic. We present a retrospective analysis of 32 patients submitted to 36 cerebral biopsies using neuronavigation and 44 patients using frame-based stereotaxy. Mean age was 46.6 and 49.3 years old respectively. Sex distribution in both groups was 50% for each. Most of lesions were lobar in both groups. Diagnostic yielding was 91.7% and 83.4%, respectively (p=0.26. We found in the postoperative CT scans intracranial hemorrhages in 13.8% cases of the first group and 9.8% cases in the second. Most of them were mild post-operative hemorrages in the biopsy site. There was one death related to the procedure in each group. Astrocytomas and metastatic adenocarcinomas were the most frequent diagnosis. Diagnostic yielding and the number of postoperative hemorrhage and death were similar on both groups and the same found in the literature.O manejo das lesões intracranianas tumorais está relacionado ao seu diagnóstico histológico adequado. Foi realizado estudo retrospectivo com 32 pacientes submetidos a 36 biópsias cerebrais por neuronavegação e 44 pacientes por estereotaxia com arco. A idade média foi 46,6 e 49,3 anos respectivamente. Nos dois grupos a distribuição por sexo foi 50% para cada. A maioria das lesões biopsiadas eram lobares nos dois grupos. A positividade diagnóstica foi 91,7% para neuronavegação e 83,4% para a estereotaxia com arco, respectivamente (p=0,26. Identificou-se hemorragia intracraniana na TC pós-operatória em 13,8% dos casos no primeiro grupo e em 9,8% no segundo, a maioria de pequena monta sem provocar piora neurológica. Ocorreu uma morte relacionada ao procedimento em cada grupo. Os diagnósticos mais freqüentes foram astrocitomas e adenocarcinomas metastáticos. A positividade diagnóstica, taxas de hemorragia pós-operatória e de mortalidade foram equiparáveis estatisticamente entre os dois métodos e se assemelham com as

Interrupção do arco aórtico tipo B em uma paciente com síndrome de olho de gato Interrupción del arco aórtico tipo B en una paciente con síndrome del ojo de gato Interrupted aortic arch type B in A patient with cat eye syndrome

Directory of Open Access Journals (Sweden)

Sintia Iole Nogueira Belangero

2009-05-01

Full Text Available Relatamos um caso de paciente com Síndrome do Olho de Gato (Cat Eye Syndrome-CES e interrupção do arco aórtico tipo B, um achado típico na síndrome da deleção 22q11.2. A análise cromossômica e a técnica de hibridização fluorescente in situ (FISH mostraram um cromossomo marcador isodicêntrico supranumerário com bi-satélite derivado do cromossomo 22. O segmento de 22pter a 22q11.2 no cromossomo supranumerário encontrado em nosso paciente não estava em sobreposição com a região deletada em pacientes com a síndrome da deleção 22q11.2. Entretanto, o achado de interrupção do arco aórtico tipo B não é usual na CES, mas é um defeito cardíaco freqüente na síndrome da deleção 22q11.Informamos un caso de paciente con Síndrome de Ojo de Gato (Cat Eye Syndrome-CES e Interrupción del Arco Aórtico tipo B, un hallazgo típico en el síndrome de la deleción 22q11.2. El análisis cromosómico y la técnica de hibridación in situ fluorescente (FISH mostraron un cromosoma marcador isodicéntrico supernumerario bisatelitado derivado del cromosoma 22. El segmento de 22pter a 22q11.2 en el cromosoma supernumerario encontrado en nuestro paciente no estaba en sobreposición con la región deletada en pacientes con el síndrome de la deleción 22q11.2. Con todo, el hallazgo de interrupción del arco aórtico tipo B no es usual en el CES, sino que es un defecto cardíaco frecuente en el síndrome de deleción 22q11.We report a patient with cat eye syndrome and interrupted aortic arch type B, a typical finding in the 22q11.2 deletion syndrome. Chromosomal analysis and fluorescent in situ hybridization (FISH showed a supernumerary bisatellited isodicentric marker chromosome derived from chromosome 22. The segment from 22pter to 22q11.2 in the supernumerary chromosome found in our patient does not overlap with the region deleted in patients with the 22q11.2 deletion syndrome. However, the finding of an interrupted aortic arch type B is

Artificial Neural Networks for the Prediction of Wear Properties of Al6061-TiO2 Composites

Science.gov (United States)

Veeresh Kumar, G. B.; Pramod, R.; Shivakumar Gouda, P. S.; Rao, C. S. P.

2017-08-01

The exceptional performance of composite materials in comparison with the monolithic materials have been extensively studied by researchers. Among the metal matrix composites Aluminium matrix based composites have displayed superior mechanical properties. The aluminium 6061 alloy has been used in aeronautical and automotive components, but their resistance against the wear is poor. To enhance the wear properties, Titanium dioxide (TiO2) particulates have been used as reinforcements. In the present investigation Back propagation (BP) technique has been adopted for Artificial Neural Network [ANN] modelling. The wear experimentations were carried out on a pin-on-disc wear monitoring apparatus. For conduction of wear tests ASTM G99 was adopted. Experimental design was carried out using Taguchi L27 orthogonal array. The sliding distance, weight percentage of the reinforcement material and applied load have a substantial influence on the height damage due to wear of the Al6061 and Al6061-TiO2 filled composites. The Al6061 with 3 wt% TiO2 composite displayed an excellent wear resistance in comparison with other composites investigated. A non-linear relationship between density, applied load, weight percentage of reinforcement, sliding distance and height decrease due to wear has been established using an artificial neural network. A good agreement has been observed between experimental and ANN model predicted results.

Desarrollo de un modelo matemático de diferencias finitas para el análisis del campo de temperaturas en la soldadura por arco de chapas finas de acero inoxidable

Directory of Open Access Journals (Sweden)

Miguel, V.

2010-12-01

procedimiento experimental para medir el campo de temperaturas en la zona cercana al cordón de soldadura de un acero inoxidable de espesor inferior a 3 mm. Este procedimiento experimental se puede utilizar para otros tipos de metales y aleaciones y para otros procedimientos de soldadura por arco eléctrico como elMIG/MAG, SMAWy FCAW. Los datos obtenidos con estos ensayos se han utilizado para validar el cálculo del campo de temperaturas mediante la aplicación numérica de diferencias finitas. Con estos experimentos se ha realizado el ajuste del modelo matemático, y las diferencias que existen entre las curvas experimentales y teóricas son debidas a las pérdidas de calor por convección y radiación, que no se han estimado en el modelo de simulación. Con este sencillo modelo el proyectista podrá calcular los ciclos térmicos del proceso y predecir el campo de temperaturas en las proximidades del cordón.

Análise do fluxo de material no processo de soldagem por fricção com pino consumível

OpenAIRE

Renan Mensch Landell

2016-01-01

Em substituição aos processos de reparo de defeitos por soldagem por arco elétrico, a Soldagem por Fricção com Pino Consumível ou Friction Hydro Pillar Processing (FHPP) vem sendo estudada devido a suas diversas vantagens sobre os processos convencionais de reparo. Isso se deve a não ocorrência de fusão do metal base e do metal de adição, ao reduzido tempo de processamento (inferior a um minuto, na maioria dos casos) e à possibilidade de automação do processo. Entretanto, por ser um processo ...

Projeto e construção de máquina de solda por atrito e análise de soldas dissimilares

OpenAIRE

Leandro Vanz de Andrade

2011-01-01

A soldagem por atrito é uma alternativa aos processos convencionais de soldagem, como a solda por arco elétrico. Por ser um processo realizado no estado sólido não sofre problemas associados à fusão do material soldado e pode ser utilizado com maior facilidade em ambientes subaquáticos. A soldagem por atrito possui boas respostas também quando utilizada em soldas de materiais dissimilares. Tendo em vista a grande demanda de novas tecnologias relacionadas à exploração e produção de petróleo no...

Arcos y lineamientos de dirección noroeste-sureste en las cuencas subandinas de venezuela y colombia

OpenAIRE

Ujueta L., Guillermo

2012-01-01

De tiempo atrás se han reconocido varias características estructurales en la Cuenca de los Llanos Orientales y en la Cuenca de Barinas-Apure, aproximadamente perpendiculares a la dirección general de la Cordillera Oriental de Colombia y a los Andes de Venezuela, respectivamente, que se conocen con el nombre de arcos. Tales arcos son estructuras identificadas mediante datos magnéticos, sísmicos e información estratigráfica obtenida a partir de la perforación de numerosos pozos para la explorac...

Obtención por vía pulvimetalúrgica de materiales compuestos de matriz de aluminio reforzados con nitruros

Directory of Open Access Journals (Sweden)

Fogagnolo, J. B.

2000-08-01

Full Text Available The use of aluminium metal matrix composites as structural materials is increasing continuously, mainly in the automotive and aerospace industries. The development of new kind of reinforcements is one of the areas of greater interest in current researches. This work investigates the use of nitrides as reinforcement for composite materials, with Al 6061 matrix, obtained by powder metallurgy and extrusion, presenting their microstructural features and their mechanical characteristics.

La utilización de los materiales compuestos de matriz de aluminio como materiales estructurales está en continuo crecimiento principalmente en la industria automovilística y aeroespacial. El desarrollo de nuevos tipos de refuerzos es una de las áreas de mayor interés en las más actuales investigaciones. Este trabajo investiga el uso de nitruros como refuerzo en materiales compuestos, de matriz de aleación AA6061, obtenidos vía pulvimetalúrgica y extrusión, presentando los aspectos microestruturales y las características mecánicas.

Structure-property investigations on a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications Part I: Local gradients in microstructure, hardness and strength

Energy Technology Data Exchange (ETDEWEB)

Horstmann, M.; Ventzke, V.; Petrovski, B.; Kocak, M. [GKSS Research Centre Geesthacht (Germany). Institute of Materials Research, Materials Mechanics; Kocik, R.; Tempus, G. [AIRBUS Deutschland GmbH, Metal Technology, Bremen (Germany); Vaidya, W.V.

2009-08-15

Sheets of AA6056 and Ti6Al4V were butt-joined by inserting the Ti-sheet into the profiled Al-sheet and by melting the Al-alloy alone using a split beam Nd:YAG laser. To study microstructural effects on properties, the Al-alloy was used in two tempers; T4 followed by post weld heat treatment T6, and in T6 followed by a defined duration of natural ageing at room temperature. As a basic step for fatigue and fracture investigations, local gradients in properties of this dissimilar joint are investigated using microscopy, hardness and tensile tests. Possible sites, from which fracture may initiate, have been then identified. All property changes are found to confine to the aluminium side. An intermetallic layer, although very thin, is found to form on the interface. The changeovers, firstly between the fusion zone and the heat affected zone and secondly between the heat affected zone and the base material, are found to be associated with changes in microstructure, hardness and strength. These are identified as the possible critical sites in addition to the interface. (Abstract Copyright [2009], Wiley Periodicals, Inc.) [German] Durch eine spezielle Stossvorbereitung wurden laserstrahlgeschweisster Mischverbindungen aus den Blechwerkstoffen AA6056 und Ti6Al4V hergestellt und zwar ohne die Verwendung von Zusatzwerkstoffen. Die grosse Differenz der Schmelztemperaturen erlaubt das selektive Erschmelzen des Aluminiumwerkstoffs, der wieder um den Titanwerkstoff benetzt, sodass es zur Ausbildung einer mechanisch-stabilen und tragfaehigen Verbindung kommt. Die Al-Legierung wurde in den Waermebehandlungszustaenden T4 und T6 verschweisst, um den mikrostrukturellen Einfluss auf die Eigenschaften der Verbindungen untersuchen zu koennen. Die Prozessfolgen sahen vor, dass beim Schweissen im Zustand T4 eine Warmauslagerung, beim Schweissen im Zustand T6 eine Kaltauslagerung definierter Dauer folgte. Die Charakterisierung lokaler Eigenschaftsgradienten hinsichtlich Gefuege, Mikrohaerte

Influencia de la transferencia en la resistencia y dureza de las uniones soldadas obtenidas por el proceso de soldadura GMAW

Directory of Open Access Journals (Sweden)

Sandra Patricia Romero Nieto

2013-04-01

Full Text Available Este trabajo describe el comportamiento del proceso de soldadura GMAW con alambre compuesto de núcleo metálico, en uniones soldadas de acero ASTM A131, grado AH 32, utilizando dos composiciones de gas de protección y las transferencias de arco pulsado y corto circuito. Las propiedades mecánicas y la microestructura se evaluaron y los resultados indican que se logra mayor resistencia a la tensión y, a su vez, un perfil de dureza más homogéneo utilizando la transferencia de arco pulsado. Asimismo, se establece que la porosidad en el pie de soldadura de las uniones en T con depósito en filete se relaciona con la longitud de arco.

Localised corrosion in AA 2099-T83 aluminium-lithium alloy: The role of grain orientation

International Nuclear Information System (INIS)

Ma, Y.; Zhou, X.; Liao, Y.; Yi, Y.; Wu, H.; Wang, Z.; Huang, W.

2016-01-01

Highlights: • Schmid factor of the grain/subgrain can indicate its corrosion susceptibility. • The localised corrosion prefers the grain with relatively large Schmid factor. • The localised corrosion is related to selective dissolution of T_1 phase. - Abstract: The mechanism for localised corrosion in AA 2099-T83 alloy during immersion in 3.5% NaCl solution is investigated. It is found that localised corrosion tends to occur in the grain with relatively large Schmid factor. The localised corrosion is related to selective dissolution of T_1 (Al_2CuLi) phase that preferentially precipitates at grain/subgrain boundaries and dislocations within grain interiors. A model is proposed to explain the development of the localised corrosion in the alloy by taking into account heterogeneous plastic deformation during cold working and preferential precipitation of T_1 phase at crystallographic defects within deformed grains.

Numerical modeling of AA2024-T3 friction stir welding process for residual stress evaluation, including softening effects

DEFF Research Database (Denmark)

Sonne, Mads Rostgaard; Carlone, Pierpaolo; Palazzo, Gaetano S.

2014-01-01

In the present paper, a numerical finite element model of the precipitation hardenable AA2024-T3 aluminum alloy, consisting of a heat transfer analysis based on the Thermal Pseudo Mechanical model for heat generation, and a sequentially coupled quasi-static stress analysis is proposed. Metallurgi...

Structure/property relations of aluminum under varying rates and stress states

Energy Technology Data Exchange (ETDEWEB)

Tucker, Matthew T [Los Alamos National Laboratory; Horstemeyer, Mark F [MISSISSIPPI STATE UNIV; Whittington, Wilburn R [MISSISSIPPI STATE UNIV; Solanki, Kiran N [MISSISSIPPI STATE UNIV.

2010-11-19

In this work we analyze the plasticity, damage, and fracture characteristics of three different processed aluminum alloys (rolled 5083-H13, cast A356-T6, and extruded 6061-T6) under varying stress states (tension, compression, and torsion) and strain rates (0.001/, 1/s., and 1000/s). The stress state difference had more of a flow stress effect than the applied strain rates for those given in this study (0.001/sec up to 1000/sec). The stress state and strain rate also had a profound effect on the damage evolution of each aluminum alloy. Tension and torsional straining gave much greater damage nucleation rates than compression. Although the damage of all three alloys was found to be void nucleation dominated, the A356-T6 and 5083-H131 aluminum alloys incurred void damage via micron scale particles where the 6061-T6 aluminum alloy incurred void damage from two scales, micron-scale particles and nanoscale precipitates. Having two length scales of particles that participated in the damage evolution made the 6061-T6 incur a strain rate sensitive damage rate that was different than the other two aluminum alloys. Under tension, as the strain rate increased, the 6061-T6 aluminum alloy's void nucleation rate decreased, but the A356-T6 and 5083-H131 aluminum alloys void nucleation rate increased.

Uso da prótese endovascular auto-expansível para tratamento das doenças da aorta torácica descendente

Directory of Open Access Journals (Sweden)

STOLF Noedir A. G.

1998-01-01

Full Text Available Os autores relatam a experiência com o tratamento de aneurisma e dissecção da aorta descendente associada ou não a comprometimento do arco aórtico com o uso de prótese intraluminal auto-expansível introduzida cirurgicamente através do arco aórtico. Foram operados 11 pacientes, 9 do sexo masculino e com idades variando de 49 a 78 anos. O diagnóstico era de aneurisma em 6, sendo 2 rotos e dissecção em 5, sendo aguda em 2. Quatro doentes apresentavam afecções cirúrgicas associadas: aneurisma de aorta ascendente (1, aneurisma de arco (1, insuficiência coronária (1 e insuficiência da valva aórtica (1. Os pacientes foram operados com colocação de prótese intraluminal auto-expansível cirurgicamente através do arco aórtico sob hipotermia profunda e parada circulatória total. Em 4 pacientes foram realizadas operações associadas: troca da valva aórtica (1, substituição da aorta ascendente (2, troca do arco aórtico (1 e revascularização miocárdica (1. Houve um óbito intra-operatório por dissecção da aorta ascendente e dois óbitos hospitalares por associação de complicações. Oito pacientes tiveram alta sendo que 1 faleceu no terceiro mês de pós-operatório. Os sobreviventes estavam bem clinicamente e o estudo por imagem mostrou adequada correção da doença. Os autores concluem que o uso da prótese intraluminal simplifica e corrige adequadamente as afecções da aorta descendente. A morbimortalidade observada nessa série deve-se a outros fatores independentes da técnica.

351. Toracotomía bilateral (técnica de clamshell para abordaje de patología compleja de aorta torácica y arco en un solo tiempo

Directory of Open Access Journals (Sweden)

S. Villar

2012-04-01

Conclusiones: En nuestra experiencia, el abordaje tipo clamshell es útil en tratamiento de patología extensa y compleja de arco aórtico y aorta torácica. Destaca la necesidad de ventilación mecánica prolongada, complicación derivada del tipo de procedimiento.

Performance Optimization of Electrical Discharge Machining (Die Sinker for Al-6061 via Taguchi Approach

Directory of Open Access Journals (Sweden)

Muhammad Qaiser Saleem

2015-04-01

Full Text Available This paper parametrically optimizes the EDM (Electrical Discharge Machining process in die sinking mode for material removal rate, surface roughness and edge quality of aluminum alloy Al-6061. The effect of eight parameters namely discharge current, pulse on-time, pulse off-time, auxiliary current, working time, jump time distance, servo speed and work piece hardness are investigated. Taguchi's orthogonal array L18 is employed herein for experimentation. ANOVA (Analysis of Variance with F-ratio criterion at 95% confidence level is used for identification of significant parameters whereas SNR (Signal to Noise Ratio is used for determination of optimum levels. Optimization obtained for Al-6061 with parametric combination investigated herein is validated by the confirmation run.

Efecto del pH y de la adición de fosfatos de sodio sobre las propiedades de gelificación y emulsión de surimi de trucha arco-iris (Oncorhynchus mykiss Efeito do pH e da adição de fosfatos de sódio sobre as propriedades de gelificação e emulsão de surimi de truta arco-íris (Oncorhynchus mykiss

Directory of Open Access Journals (Sweden)

Juan Díaz-Vela

2008-09-01

Full Text Available Para la elaboración de surimi se han empleado distintas técnicas, sin embargo, es indispensable mantener la funcionalidad de las proteínas musculares durante su extracción, ya que son afectadas principalmente por el pH. La incorporación de fosfatos en productos cárnicos afecta el pH, teniendo como consecuencia una mejora en la capacidad de retención de agua de las proteínas musculares, alterando la funcionalidad de estos productos. Se utilizó la metodología de superficie de respuesta para determinar el efecto de cinco niveles de pH y cinco concentraciones de una mezcla de fosfatos de sodio comercial sobre la funcionalidad de surimi de trucha arco-iris, evaluada por su capacidad de emulsión y trabajo de emulsión, fuerza de gel y trabajo de penetración de geles de surimi. Los resultados obtenidos indican que el incremento en la concentración de fosfatos de sodio mejoró la funcionalidad del surimi y a pH alcalino las propiedades de emulsión mejoraron, pero se afectaron negativamente las propiedades de gelificación.Para a elaboração de surimi, diferentes técnicas podem ser usadas, mas é indispensável manter a funcionalidade das proteínas miofibrilares, afetadas principalmente pelo pH, durante o processo. A incorporação de fosfatos a produtos cárneos afeta o pH, tendo como conseqüência, principalmente, a melhoria da capacidade de retenção de água do músculo, alterando a funcionalidade destes produtos. A metodologia de superfície de resposta foi usada para determinar a influência de cinco níveis de pH e cinco concentrações de uma mistura comercial de fosfatos de sódio sobre a funcionalidade de surimi de truta arco-íris, avaliada através de sua capacidade de emulsificação e trabalho de emulsificação, força de gel e trabalho de penetração de géis de surimi. Os resultados obtidos indicam que o aumento na concentração dos fosfatos de sódio melhorou a funcionalidade do surimi e que o pH alcalino favoreceu

Evolution of the corrosion process of AA 2024-T3 in an alkaline NaCl solution with sodium dodecylbenzenesulfonate and lanthanum chloride inhibitors

International Nuclear Information System (INIS)

Zhou, Biner; Wang, Yishan; Zuo, Yu

2015-01-01

Highlights: • Inhibition effect of LaCl 3 and SDBS for AA 2024 in NaCl solution (pH 10) was studied. • At the beginning the active polarization behavior of the alloy changed to passivation. • The passive behavior gradually disappeared with time and pitting happened at S-phases. • The compounded inhibitors showed good inhibition but cannot totally inhibit pitting. • The adsorption of SDBS played the key role for inhibition to the corrosion process. - Abstract: The evolution of the corrosion process of AA 2024-T3 in 0.58 g L −1 NaCl solution (pH 10) with sodium dodecylbenzenesulfonate (SDBS) and lanthanum chloride inhibitors was studied with electrochemical and surface analysis methods. With the addition of the compounded LaCl 3 and SDBS inhibitors, in the early stage the polarization behavior of AA 2024-T3 changed from active corrosion to passivation, and both the general corrosion and pitting corrosion were inhibited. However, with the immersion time extended, the passive behavior gradually disappeared and pitting happened at the Cu-rich phases. After 24 h immersion, the compounded inhibitors still showed good inhibition for general corrosion, but the polarization curve again presented the characteristic similar to active polarization. The compounded inhibitors also inhibited the pitting corrosion to some extent. The acting mechanism of the inhibitors SDBS and La 3 Cl on the corrosion process of AA 2024-T3 in the test solution was discussed.

Studies on the distribution of 125I-labelled Hemorrhagic toxin from agkistrodon acutus (125I-AaT) in rabbits and its pharmacokinetic characters

International Nuclear Information System (INIS)

Huang Yuchu; Jiang Bo; Wang Yuzheng; Xu Xun

1988-01-01

125 I-AaT, prepared by oxidant-chloroamine T from the related venom of Agkistrodon Acutus, is given to a rabbit by intravenous injection, and then, the distribution of the toxin in the rabbit and its pharmacokinetic characters have been studied.The rabbit is killed five hours after the injection, and the radioactivity in each tissue calculated. The result indicates that the blood-brain barrier exist in the body, and large quantity of by-products of 125 I-AaT metabolism is eliminated from urine by the kidney. For pharmacokinetics, the computer simulated curve demonstrates that the result conforms to the Two Compartment Model. The fast component half-life T 1/2α is 3.15 mins. , the slow component half-life T 1/2β is 165 mins. , and the biological half-life T 1/2 is 75.2 mins.V d33 , V t and V e have been analyzed, and the author thinks preliminarily that there must have been a corresponding receptor to the toxin in the body

Simulación de un horno eléctrico de arco CC para aceración: estudio de la región del arco y del baño metálico

Directory of Open Access Journals (Sweden)

Ramírez Argáez, Marco Aurelio

2001-06-01

Full Text Available A mathematical model was developed to describe fluid flow, heat transfer, and electromagnetic phenomena in the arc and bath regions of DC Electric Arc Furnaces (DCEAF. The model is used to examine the effect on flow patterns and temperature distribution in the bath, under the influence of both an arc and bottom argon injection in steel or steel/slag systems. Validation of the model employed experimental measurements from systems physically related to DC-EAF from literature. For the conditions analyzed, electromagnetic forces dominate the fluid motion in the bath. Buoyancy and shear forces from the arc have a negligible effect in driving the flow; however, they partially counteract the electromagnetic forces. Slag decreases fluid motion in the steel and enhances temperature stratification in the system. Stirring of the bath, using a 3-nozzle inert gas injection system, is found to promote temperature uniformity in the regions near the lateral wall of the furnace.

Se desarrolló un modelo matemático que describe el flujo de fluidos, transferencia de calor y fenómenos electromagnéticos en las regiones del arco y baño en hornos eléctricos de arco de corriente continua (HEA-CC. El modelo predice patrones de flujo y distribuciones de temperatura bajo la influencia del arco eléctrico y del burbujeo de argón en baños monofásicos (acero ó en sistemas bifásicos (acero / escoria. Para validar, parcialmente, el modelo se usaron mediciones experimentales citadas en la literatura sobre sistemas análogos al HEA. Bajo las condiciones analizadas, el burbujeo de argón domina el flujo de fluidos promoviendo excelente homogenización dentro del baño. La escoria afecta negativamente al mezclado, fomentando la formación de zonas calientes sobre la superficie del acero. El arco eléctrico calienta al baño y lo agita mediante fuerzas electromagnéticas. Asimismo, se encontró que las fuerzas boyantes y de corte sobre la superficie del baño son

An investigation into the mechanism for enhanced mechanical properties in friction stir welded AA2024-T3 joints coated with cold spraying

Science.gov (United States)

Li, N.; Li, W. Y.; Yang, X. W.; Feng, Y.; Vairis, A.

2018-05-01

Using cold spraying (CS), a surface layer with a modified microstructure and enhanced mechanical properties was formed on a 3.2 mm thick friction stir welded (FSWed) AA2024-T3 joint. The combined effect of "shot peening effect (SPE)" and "heat flow effect (HFE)" during CS were used to enhance joint mechanical properties. The microstructure evolution of the FSWed AA2024-T3 joints in the surface layer following CS coatings and their effect on mechanical properties were systematically characterized with electron back-scattered diffraction, transmission electron microscopy, differential scanning calorimetry and mechanical tests. Based on these experiments, a grain refinement, finer and more S phases, and improved amount of Guinier-Preston-Bagaryatsky (GPB) zones produced by CS treatments are proposed. The deposition of aluminum coating on the joint, lead to hardness recovery in the stir zone and the development of two low hardness zones as the density of GPB increased. The tensile properties of FSWed AA2024-T3 joints improved with the application of the aluminum coatings. Experiments and analysis of the enhanced mechanical properties mechanism indicate that SPE with a high plastic deformation and HFE with an intensive heat flow are necessary for the production of refined grains and increased numbers of GPB zones.

Desenvolvimento e comparação de um método de construção de arcos ortodônticos individualizados com um método tradicional de escolha de arcos ortodônticos pré-fabricados Development and comparison of a individualized orthodontic arches construction method and a traditional method for choosing pre-manufactured orthodontic arches

OpenAIRE

Antonio José Borin Neto; Rodrigo Cecanho; Helena Cristina Francisco Pereira da Silva

2009-01-01

INTRODUÇÃO: a existência de pacientes com arcos dentários e anatomias diferentes dos diagramas de arcos ortodônticos preestabelecidos justifica este trabalho. OBJETIVO: foi proposto mostrar um método de construção de arcos ortodônticos que respeitasse a anatomia individual de cada paciente e que fosse construído sem a necessidade de diagramas impressos pré-desenhados. MÉTODOS: em vinte modelos inferiores de gesso, foram colados, no centro da coroa clínica dos seus dentes, braquetes e tubos. C...

Studies on post weld heat treatment of dissimilar aluminum alloys by laser beam welding technique

Science.gov (United States)

Srinivas, B.; Krishna, N. Murali; Cheepu, Muralimohan; Sivaprasad, K.; Muthupandi, V.

2018-03-01

The present study mainly focuses on post weld heat treatment (PWHT) of AA5083 and AA6061 alloys by joining these using laser beam welding at three different laser power and two different beam spot sizes and three different welding speeds. Effects of these parameters on microstructural and mechanical properties like hardness, tensile strength were studied at PWHT condition and significant changes had been observed. The PWHT used was artificial aging technique. The microstructural observations revealed that there was a appreciable changes were taken place in the grain size. The microhardness observations proven that the change in the hardness profile in AA6061 was appreciable than in the AA5083. The tensile strength of 246 MPa was recorded as highest. The fractured surfaces observed are predominantly ductile in nature.

Análisis de la respuesta de edificios unifamiliares adosados de obra de fábrica sometidos a asentamientos inducidos por tunelación

OpenAIRE

Gálvez Buezo, Javier

2012-01-01

En el presente trabajo se estudia el comportamiento de la obra de fábrica como elemento estructural portante. La obra de fábrica es un material que por su constitución presenta una capacidad nula o prácticamente nula de resistir tracciones. Por ello, los edificios proyectados con este material se diseñan con formas geométricas priorizando las compresiones, como pueden ser las paredes de carga, los pilares, arcos y bóvedas. El problema resulta cuando, por razones imprevistas, la estructura ...

Otimização das condições de pré-redução do As(V em extratos do método BCR para quantificação de arsênio por HG-AAS Optimization of pre-reduction conditions of as(V in BCR extracts to quantify arsenic by HG-AAS

Directory of Open Access Journals (Sweden)

Eduardo Vinícius Vieira Varejão

2009-08-01

Full Text Available A determinação de As por espectrometria de absorção atômica com geração de hidretos (HG-AAS constitui um método simples, sensível, preciso e de baixo custo. Entretanto, essa técnica requer a pré-redução das espécies de As(V, o que se obtém através do uso de agentes redutores como o KI. Em extratos contendo agentes oxidantes, a pré-redução do As é comprometida, como acontece em extratos obtidos pela aplicação do método BCR (acrônimo francês para Community Bureau of Reference para a extração sequencial de As em sedimentos. O objetivo deste trabalho foi avaliar as condições de redução do As(V a As(III, de modo a permitir o uso da HG-AAS para a quantificação do arsênio em extratos obtidos a partir do método BCR. Foram avaliadas condições reacionais utilizando KI, L-cisteína e ácido ascórbico. Para cada uma das etapas de extração do método BCR, diferentes condições de pré-redução possibilitaram a detecção quantitativa do As presente. O uso do método BCR para a extração de arsênio em amostras de sedimentos contaminadas e a aplicação das condições de pré-redução do As(V selecionadas, seguida pela detecção por HG-AAS, forneceram percentagens de recuperação entre 91 e 99 %.The determination of As by hydride generation atomic absorption spectroscopy (HG-AAS is a simple, sensitive, precise and low-cost method. However, this technique requires the pre-reduction of the existing As(V species, which is obtained by the use of reducing agents such as KI. In extracts containing oxidizing agents, the pre-reduction of As is impaired, as it occurs in extracts obtained by the BCR (French acronym for Community Bureau of Reference method for the sequential extraction of As in sediments. The objective of this study was to evaluate the conditions for the reduction of As(V to As(III in a way that allows the use of HG-AAS for the quantification of arsenic in extracts obtained using the BCR method. Reaction

Study of the feasibility of friction STIR welding applied to the fabrication of monolithic fuel elements; Estudio para la aplicacion del proceso de soldadura por friccion-agitacion (FSW) a la fabricacion de elementos combustibles monoliticos

Energy Technology Data Exchange (ETDEWEB)

Cabot, Pedro J; Moglioni, A [Comision Nacional de Energia Atomica, General San Martin (Argentina). Dept. ENDE; Mirandou, Marcela; Balart, Silvia N [Comision Nacional de Energia Atomica, General San Martin (Argentina). Dept. de Materiales

2004-07-01

The monolithic U-Mo fuel elements consist in a foil of a U-Mo alloy encased in Al. One of the techniques that is being tried to apply in their fabrication is Friction Stir Welding in the 'no contact at the interface' mode. The Laboratory of Welding at the National Atomic Energy Commission (Argentina) has a great experience in the conventional form of this technique so has started working on this new application. This paper describes the experiments performed to obtain the operative parameters. In the first experiments AA6061 T6 (Al) plates and sheets of AISI 316 (SS) were used to obtain the optimal operative parameters of the process. Welds were performed and evaluated for different operative variables such speed, angle and diameter of the tool and tool-interface gap keeping the rotation speed constant. Tensile test, pressure leak-proof test, bending test, non-destructive test and metallography were used to characterize the welds. Finally, SS and U-Mo foils were encased using the parameters selected from the first experiments. The samples prepared with U-Mo alloy will be used as diffusion couples and for the studies of interdiffusion under irradiation. (author)

ARCO and Sun agree to settle Iranian claims

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that ARCO and Sun Co. Inc. have agreed to separate settlements totaling almost $261 million that resolve their claims over oil field assets expropriated by Iran in 1978--80. The agreements are subject to approval by the Iran-U.S. claims tribunal at The Hague. The tribunal was set up in 1981 to resolve foreign claims to assets nationalized by the government of Ayatollah Khomeini following the fall of the Shah of Iran as a result of the 1978-79 Iranian revolution. The settlements are seen as the latest steps Iran has taken to normalize relations with the U.S., notably through petroleum related deals

A Comparative Study on Permanent Mold Cast and Powder Thixoforming 6061 Aluminum Alloy and Sicp/6061Al Composite: Microstructures and Mechanical Properties

Directory of Open Access Journals (Sweden)

Xuezheng Zhang

2016-05-01

Full Text Available Microstructural and mechanical characterization of 10 vol% SiC particles (SiCp reinforced 6061 Al-based composite fabricated by powder thixoforming (PTF was investigated in comparison with the PTF and permanent mold cast (PMC 6061 monolithic alloys. The results reveal that the microstructure of the PMC alloy consists of coarse and equiaxed α dendrites and interdendritic net-like eutectic phases. However, the microstructure of the PTF composite, similar to that of the PTF alloy, consists of near-spheroidal primary particles and intergranular secondarily solidified structures except SiCp, which are distributed in the secondarily solidified structures. The eutectics amount in the PTF materials is distinctly lower than that in the PMC alloy, and the microstructures of the former materials are quite compact while that of the latter alloy is porous. Therefore, the PTF alloy shows better tensile properties than the PMC alloy. Owing to the existence of the SiC reinforcing particles, the PTF composite attains an ultimate tensile strength and yield strength of 230 MPa and 128 MPa, representing an enhancement of 27.8% and 29.3% than those (180 MPa and 99 MPa of the PTF alloy. A modified model based on three strengthening mechanisms was proposed to calculate the yield strength of the PTF composite. The obtained theoretical results were quite consistent with the experimental data.

A Comparative Study on Permanent Mold Cast and Powder Thixoforming 6061 Aluminum Alloy and Sicp/6061Al Composite: Microstructures and Mechanical Properties.

Science.gov (United States)

Zhang, Xuezheng; Chen, Tijun; Qin, He; Wang, Chong

2016-05-24

Microstructural and mechanical characterization of 10 vol% SiC particles (SiC p ) reinforced 6061 Al-based composite fabricated by powder thixoforming (PTF) was investigated in comparison with the PTF and permanent mold cast (PMC) 6061 monolithic alloys. The results reveal that the microstructure of the PMC alloy consists of coarse and equiaxed α dendrites and interdendritic net-like eutectic phases. However, the microstructure of the PTF composite, similar to that of the PTF alloy, consists of near-spheroidal primary particles and intergranular secondarily solidified structures except SiC p , which are distributed in the secondarily solidified structures. The eutectics amount in the PTF materials is distinctly lower than that in the PMC alloy, and the microstructures of the former materials are quite compact while that of the latter alloy is porous. Therefore, the PTF alloy shows better tensile properties than the PMC alloy. Owing to the existence of the SiC reinforcing particles, the PTF composite attains an ultimate tensile strength and yield strength of 230 MPa and 128 MPa, representing an enhancement of 27.8% and 29.3% than those (180 MPa and 99 MPa) of the PTF alloy. A modified model based on three strengthening mechanisms was proposed to calculate the yield strength of the PTF composite. The obtained theoretical results were quite consistent with the experimental data.

Longitudinal study of experimental induction of AA amyloidosis in mice seeded with homologous and heterologous AA fibrils.

Science.gov (United States)

Muhammad, Naeem; Murakami, Tomoaki; Inoshima, Yasuo; Ishiguro, Naotaka

2016-09-01

To investigate pathogenesis and kinetics of experimentally induced murine AA amyloidosis seeded with homologous (murine) and heterologous (bovine) AA fibrils. Experimental AA amyloidosis was induced by administration of inflammatory stimulus and preformed AA fibrils to a total of 111 female C57/Black mice. In this longitudinal study, heterologous (bovine) as well as homologous (murine) AA fibrils were injected intraperitoneally to mice in various combinations. Re-stimulation was done at 120 or 300 days post first inoculation. To analyze the intensity of amyloid depositions in mice organs, immunohistochemical techniques and image J software were used. Assessment of cytokines level in sera was done using a Mouse Th1/Th2/Th17 Cytokine CBA Kit. Incidence and severity of AA amyloidosis were quite low in mice inoculated with heterologous bovine AA fibrils than homologous murine one. Homologous AA fibrils administration at first and second inoculation caused maximum amount of amyloid depositions and severe systemic form of amyloidosis. Increase in the level of pro-inflammatory cytokine IL-6 was observed after first inoculation, while second inoculation caused a further increase in the level of anti-inflammatory cytokine IL-10. AA amyloidosis can be induced by heterologous as well as homologous AA fibrils. Severity of AA amyloidosis induced with homologous AA fibrils is higher compared to heterologous AA fibrils.

Microstructural features of friction stir welded dissimilar Aluminium alloys AA2219-AA7475

Science.gov (United States)

Zaman Khan, Noor; Ubaid, Mohammed; Siddiquee, Arshad Noor; Khan, Zahid A.; Al-Ahmari, Abdulrahman; Chen, Xizhang; Haider Abidi, Mustufa

2018-05-01

High strength, good corrosion resistance, light weight make aluminium alloys a material of choice in many industrial sectors like aerospace, marine etc. Problems associated with welding of these alloys by fusion welding processes restricted their use in various industries. Friction stir welding (FSW), a clean solid-state joining process, easily overcomes various difficulties encountered during conventional fusion welding processes. In the present work, the effect of rotational speed (710 rpm, 900 rpm and 1120 rpm) on micro-hardness distribution and microstructure of FSWed dissimilar aluminium alloy joints were analyzed. Plates of AA7475-T761 and AA2219-O having thickness of 2.5 mm were welded by fixing AA7475 on retreating side (RS) and AA2219 on advancing side (AS). Welded joints were characterized by Vickers micro-hardness testing, scanning electron microscopy (SEM) and optical microscopy (OM). Results revealed that rotational speed significantly affects the micro-hardness due to increase in grain size, coarsening and dissolution of strengthening precipitates and re-precipitation. Higher micro-hardness values were observed in stir zone due to grain refinement and re-precipitation. Minimum micro-hardness value was observed at the TMAZ/HAZ of advancing side due to thermal softening.

Potencial visual evocado por padrão reverso com tabuleiro de xadrez em gatos domésticos adultos

Directory of Open Access Journals (Sweden)

Nathalia Veronica Carneiro Ferreira

2015-05-01

Full Text Available O potencial visual evocado por padrão reverso (PVE-PR é um método objetivo, não invasivo e estabelecido para as investigações funcionais. Este trabalho teve como objetivo a obtenção de dados do PVE-PR com tabuleiro de xadrez em gatos domésticos adultos, além de verificar a influência de diferentes ângulos visuais sobre os picos de tempo implícito e amplitude das ondas N75 e P100. Foram utilizados 13 gatos adultos (2-4 anos de idade, de ambos os sexos. Cada animal foi posicionado 100cm de distância de um monitor de vídeo situado a 17,2º. O estímulo gerado para a formação dos PVEs foi uma onda "quadrada" com a frequência de 6 Hz, apresentados em cinco frequências espaciais (16', 32', 64', 130' e 260'de arco. Os valores médios dos tempos implícitos (ms e amplitudes (µV de P100 não foram diferentes estatisticamente e nem estavam correlacionados (r=0,067. Com a mudança de tamanho do ângulo de estímulo apresentado, os picos de tempo implícito e amplitude do P100 apresentaram uma discreta variação. Aos 32' de arco, a amplitude de P100 atingiu seu pico máximo, com 14,94±1,13µV (média±erro padrão da média. N75 não mostrou nenhuma variação de amplitude. Com 16' de arco, o tempo implícito de N75 diminuiu, não havendo correlação com os valores de amplitude (r=0,26. O ângulo visual que desencadeou um maior pico de amplitude e tempo implícito constante para P100, foi o de 32' de arco. Em gatos adultos, um PVE-PR pode ser obtido sem o uso de midriáticos e sedativos, com estímulos subtendidos entre ângulos grandes como 64' e pequenos como 16'

IMAGING THE DISK AND JET OF THE CLASSICAL T TAURI STAR AA TAU

International Nuclear Information System (INIS)

Cox, Andrew W.; Grady, Carol A.; Hammel, Heidi B.; Hornbeck, Jeremy; Russell, Ray W.; Sitko, Michael L.; Woodgate, Bruce E.

2013-01-01

Previous studies of the classical T Tauri star AA Tau have interpreted the UX-Orionis-like photo-polarimetric variability as being due to a warp in the inner disk caused by an inclined stellar magnetic dipole field. We test that these effects are macroscopically observable in the inclination and alignment of the disk. We use Hubble Space Telescope (HST)/STIS coronagraphic imagery to measure the V magnitude of the star for both STIS coronagraphic observations, compare these data with optical photometry in the literature, and find that, unlike other classical T Tauri stars observed in the same HST program, the disk is most robustly detected in scattered light at stellar optical minimum light. We measure the outer disk radius, 1.''15 ± 0.''10, major-axis position angle, and disk inclination and find that the inner disk, as reported in the literature, is both misinclined and misaligned with respect to the outer disk. AA Tau drives a faint jet, detected in both STIS observations and in follow-on Goddard Fabry-Perot imagery, which is also misaligned with respect to the projection of the outer disk minor axis and is poorly collimated near the star, but which can be traced 21'' from the star in data from 2005. The measured outer disk inclination, 71° ± 1°, is out of the range of inclinations suggested for stars with UX-Orionis-like variability when no grain growth has occurred in the disk. The faintness of the disk, small disk size, and detection of the star despite the high inclination all indicate that the dust disk must have experienced grain growth and settling toward the disk midplane, which we verify by comparing the observed disk with model imagery from the literature.

Alteração do arco longitudinal medial na neuropatia periférica diabética Medial longitudinal arch change in diabetic peripheral neuropathy

Directory of Open Access Journals (Sweden)

Isabel de Camargo Neves Sacco

2009-01-01

Full Text Available OBJETIVO: Descrever e comparar as características antropométricas dos pés de sujeitos saudáveis e diabéticos neuropatas por meio de índices classificatórios do Arco Longitudinal Medial (ALM: Índice do Arco (IA, Índice de Chippaux-Cmirak (CSI e Ângulo  ( e comparar a classificação destes métodos nestes grupos. MATERIAIS E MÉTODO: Grupo controle (GC composto por 21 sujeitos saudáveis, e grupo diabético (GD, formado por 46 diabéticos portadores de neuropatia diabética. Pela impressão plantar foram calculados os índices. RESULTADOS: Houve maior proporção de pés planos no GD para os três índices (IA: 32,2%, CSI: 59,7%, A: 17,5%, enquanto os pés cavos comportaram-se de forma contrária. Os grupos foram estatisticamente diferentes em relação à proporção de pés planos no IA (p=0,0080 e no CSI (p=0,0000 e de pés cavos no  (p=0,0036. Houve diferença significativa quando comparados GC e GD para os três índices: IA (p=0,0027, CSI (p=0,0064,  (p=0,0296. CONCLUSÃO: Os dados demonstram alterações motoras e ortopédicas decorrentes da neuropatia periférica, responsável pela desestruturação do pé, levando ao desabamento do ALM. Observou-se que o ângulo A destoou fortemente da classificação do arco feita pelos outros dois índices, e com isso destacamos que sua utilização merece cuidado.OBJECTIVE: To describe and compare foot anthropometry in healthy and diabetic subjects using Medial Longitudinal Arch (MLA classificatory indexes: Arch Index (AI, Chippaux-Smirak Index (CSI and  Angle (Â, as well as to compare the classification of these methods in each group. MATERIALS AND METHODS: Control Group (CG composed by 21 healthy subjects and Diabetic Group (DG, with 46 diabetic neuropathy subjects. The indexes were calculated from footprints. RESULTS: A larger proportion of flat feet was seen in DG for the three indexes (AI: 32,2%, CSI: 59,7%, A: 17,5%, while highly arched feet acted oppositely. The groups were

Forjamento da liga AA 2011 no estado semi-solido : estudo do processo e do produto

OpenAIRE

Maximino Manuel Montel Rovira

2001-01-01

Resumo: O trabalho apresenta uma análise da aplicação da tecnologia de processamento de materiais no estado semi-sólido, no foIjamento da liga de alumínio AA2011. Inicialmente foi estudada a influência da temperatura de reofundição na qualidade de pastas semi-sólidas obtidas pelo método de fusão parcial controlada de estruturas refinadas (FPCER). Foram sistematizados testes de tratamento térmico a quatro diferentes temperaturas (888,893,898 e 903 K), por tempo de 10 min para globularização da...

Fractura-luxación transemilunar

Directory of Open Access Journals (Sweden)

F. Martínez-Martínez

Full Text Available Presentamos el caso de un varón deportista de profesión, que tras un traumatismo durante su práctica deportiva habitual sufre una fractura-luxación transestiloidesradial- transemilunar, lesión que es poco común y que escapa de los patrones típicos. Tras reducción cerrada de urgencia fue intervenido quirúrgicamente realizando osteosíntesis del semilunar y reparación del ligamento escafolunar, con recuperación satisfactoria. Las fracturas-luxaciones carpianas son lesiones severas que pueden asociarse a múltiples patrones de lesiones ligamentosas y óseas. Bain añade el arco translunar (fractura del semilunar para usarlo como complemento al modelo de clasificación de inestabilidades perilunares de Johnson de arco mayor-arco menor. Este tipo de lesión translunar no sigue el esquema descrito por Mayfield, aunque sí es una combinación de este concepto con una fractura del semilunar. En el caso que presentamos se produjo una afectación de los 3 arcos: fractura de la estiloides radial (arco mayor, fractura del semilunar (arco translunar y lesión de los ligamentos carpianos (arco menor; esto aún no se ha estudiado biomecánicamente.

ARCOS Network: A Sustainable Mountain Development Hub for Africa

Directory of Open Access Journals (Sweden)

Gilbert Muvunankiko

2017-05-01

Full Text Available The African continent is endowed with mountains of high productivity, biodiversity, endemism, and cultural diversity. African mountain ecosystems play an important role in economic development, poverty alleviation, and environmental protection. However, climate change and extreme events, as well as human activities, alter the capacity of mountains to provide such services to millions of Africans who depend on them. Since the creation in 1995 of the Albertine Rift Conservation Society (ARCOS, mountains have been at the core of its programs, and collaboration among stakeholders is a key aspect of its search for sustainable solutions to threats affecting African mountains.

Response Ant Colony Optimization of End Milling Surface Roughness

Directory of Open Access Journals (Sweden)

Ahmed N. Abd Alla

2010-03-01

Full Text Available Metal cutting processes are important due to increased consumer demands for quality metal cutting related products (more precise tolerances and better product surface roughness that has driven the metal cutting industry to continuously improve quality control of metal cutting processes. This paper presents optimum surface roughness by using milling mould aluminium alloys (AA6061-T6 with Response Ant Colony Optimization (RACO. The approach is based on Response Surface Method (RSM and Ant Colony Optimization (ACO. The main objectives to find the optimized parameters and the most dominant variables (cutting speed, feedrate, axial depth and radial depth. The first order model indicates that the feedrate is the most significant factor affecting surface roughness.

Burnthrough Modeling of Marine Grade Aluminum Alloy Structural Plates Exposed to Fire

OpenAIRE

Rippe, Christian M

2015-01-01

Current fire induced burnthrough models of aluminum typically rely solely on temperature thresholds and cannot accurately capture either the occurrence or the time to burnthrough. This research experimentally explores the fire induced burnthrough phenomenon of AA6061-T651 plates under multiple sized exposures and introduces a new burnthrough model based on the near melting creep rupture properties of the material. Fire experiments to induce burnthrough on aluminum plates were conducted us...

Microsolvation of the acetanilide cation (AA(+)) in a nonpolar solvent: IR spectra of AA(+)-L(n) clusters (L = He, Ar, N2; n ≤ 10).

Science.gov (United States)

Schmies, Matthias; Patzer, Alexander; Schütz, Markus; Miyazaki, Mitsuhiko; Fujii, Masaaki; Dopfer, Otto

2014-05-07

Infrared photodissociation (IRPD) spectra of mass-selected cluster ions of acetanilide (N-phenylacetamide), AA(+)-Ln, with the ligands L = He (n = 1-2), Ar (n = 1-7), and N2 (n = 1-10) are recorded in the hydride stretch (amide A, νNH, νCH) and fingerprint (amide I-III) ranges of AA(+) in its (2)A'' ground electronic state. Cold AA(+)-Ln clusters are generated in an electron impact ion source, which predominantly produces the most stable isomer of a given cluster ion. Systematic vibrational frequency shifts of the N-H stretch fundamentals (νNH) provide detailed information about the sequential microsolvation process of AA(+) in a nonpolar (L = He and Ar) and quadrupolar (L = N2) solvent. In the most stable AA(+)-Ln clusters, the first ligand forms a hydrogen bond (H-bond) with the N-H proton of trans-AA(+) (t-AA(+)), whereas further ligands bind weakly to the aromatic ring (π-stacking). There is no experimental evidence for complexes with the less stable cis-AA(+) isomer. Quantum chemical calculations at the M06-2X/aug-cc-pVTZ level confirm the cluster growth sequence derived from the IR spectra. The calculated binding energies of De(H) = 720 and 1227 cm(-1) for H-bonded and De(π) = 585 and 715 cm(-1) for π-bonded Ar and N2 ligands in t-AA(+)-L are consistent with the observed photofragmentation branching ratios of AA(+)-Ln. Comparison between charged and neutral AA((+))-L dimers indicates that ionization switches the preferred ion-ligand binding motif from π-stacking to H-bonding. Electron removal from the HOMO of AA(+) delocalized over both the aromatic ring and the amide group significantly strengthens the C[double bond, length as m-dash]O bond and weakens the N-H bond of the amide group.

Aneurismas del arco aórtico. Generalidades: epidemiología, manifestaciones clínicas y diagnóstico. Indicaciones de cirugía. Cirugía abierta

Directory of Open Access Journals (Sweden)

Eduardo Bernabeu

2015-09-01

Full Text Available El arco aórtico es un segmento fundamental de la aorta. Se describe la enfermedad quirúrgica que afecta al mismo, así como la epidemiología y la historia natural de los aneurismas torácicos, que son la condición que más frecuentemente lo afectan. Se revisan las manifestaciones clínicas de estos y las técnicas empleadas para su diagnóstico. Finalmente, se expone una panorámica de las indicaciones quirúrgicas y las técnicas de cirugía abierta empleadas.

Avaliação radiografica de duas tecnicas, para o registro da relação centrica em pacientes classe I de Angle

OpenAIRE

Guilherme da Gama Ramos

2007-01-01

Resumo: Este estudo teve como objetivo comparar, por meio de radiografias transcranianas (técnica Accurad), duas técnicas descritas na literatura para a obtenção da relação cêntrica e posição das cabeças da mandíbula nas fossas mandibulares. Uma delas, a manipulação bilateral descrita por DAWSON em 1974. A outra, um traçado gráfico dos movimentos mandibulares no plano horizontal, denominado por GYSI, em 1910, de arco gótico, obtido por meio de um dispositivo, chamado de registro intra-oral. F...

Development of an Extrusion Process to Ameliorate the Tribological Properties of Heat Treated Al Mg Si (Cu System Alloys Matrix Composites in Consolidated State

Directory of Open Access Journals (Sweden)

M.O. Shabani

2012-09-01

Full Text Available The developments of AA6061 aluminum matrix composites are of great interest in industrial applications for lighter materials with high specific strength, stiffness and wear resistance. In this article, the dry wear behavior of AA6061 matrix composites was investigated under different sliding speeds and applied loads. It is observed that the composites exhibit higher friction coefficients and greater wear resistances than the Al alloy against the steel disc surface. Low-speed wear rates are associated with abrasive wear,indicating the dominant wear mechanism, though minor, delamination wear may be produced. Abrasive wear associates with the formation of deep scratches on the worn surface in the sliding direction. For a given load and sliding velocity the extent of iron transfer is highest in case of 15 % SiC reinforced Al6061 composite among all the material studied.

La construcción tradicional en la arquitectura de Gaudí

Directory of Open Access Journals (Sweden)

Bassegoda Nonell, Juan

1990-08-01

Full Text Available In order to create the original and beautiful architectural forms which made Gaudí famous, the architect solely employed traditional materials (brick, stone, glazed ceramic lime and quick-drying cement for mortar, plaster, etc. and techniques, or their derivations. The author reviews these Gaudinian construction techniques, from the simple column to hyperbolic paraboloids, the square column, the false arch, festoon arches or catenary profiles, spiral arches. Catalan vaults (brick vault of one, two or more ceilings of brick laid flat, ribbed vaulting, cupolas, penditives, partition arches, etc.

Para crear las originales y bellas formas arquitectónicas que han hecho famoso a Gaudí, el arquitecto se limitó a utilizar los materiales (ladrillo manual, piedra, cerámica vidriada, morteros de cal y de cemento rápido, yeso, etc. y las técnicas tradicionales, o técnicas derivadas de ellas. El autor de este articulo pasa revista a estas técnicas constructivas gaudinianas, desde el pilar sencillo a los paraboloides hiperbólicos, pasando por el pilar cartabón, el falso arco, arco de festón o perfiles de catenaria, arcos de rosca, bóvedas tabicadas, bóvedas nervadas, cúpulas, pechinas, arcos tabicones, etcétera.

Evaluation of corrosion of steel embedded in concrete exposed to carbonation AAS using a factorial experiment with repeated measures. Evaluación de la corrosión del acero embebido en concreto AAS, expuesto a carbonatación mediante un experimento factorial con medidas repetidas.

Directory of Open Access Journals (Sweden)

W Aperador Chaparro

2013-03-01

Full Text Available This article presents various techniques for assessing corrosion, the linear polarization resistance and galvanostatic pulse, the analysis was performed using analysis of variance models using a factorial experiment with three factors, one repeated measure, because on the same experimental unit (reinforced concrete, it experienced several samples to be measured in time (0 h=1, 350 h=2, 700 h=3, 1050 h=4, 1700 h=5 y 2600 h=6. This makes the observations are not independent, the other two factors relate to, the binder (ce: 1 = activatedslag [AAS] and 2 = ordinary Portland concrete [OPC] and the exposure condition (ca: 1 = y 2 = environmental exposure accelerated carbonation. These factors were discussed according to the results of the electrochemical properties. Initially performed the statistical processing of each of the variables in relation to the properties and analyzed the interaction between them. Where they established the differences in materials used as coating steel, concrete, OPC and AAS. OPC concrete specimens, exhibited a resting potential, polarization resistance and ohmic (CO2 condition than those obtained for reinforced concrete in AAS.En este artículo se presentan las técnicas de evaluación de la corrosión, tales como potencial de corrosión, resistencia lineal a la polarización y pulso galvanostático a los concretos de activación alcalina (AAS y Portland tipo I (OPC. El estudio se realizó por medio de modelos de análisis de varianza, aplicando un experimento factorial con tres factores, uno de ellos medida repetida, debido a que sobre la misma unidad experimental (concreto armado AAS y OPC se ensayaron varias muestras para medirlas en el tiempo (0 h=1, 350 h=2, 700 h=3, 1050 h=4, 1700 h=5 y 2600 h=6, lo que hace que las observaciones no sean independientes; los otros dos factores corresponden al cementante (ce: 1=escoria activada alcalinamente [AAS] y 2=concreto Portland ordinario [OPC] y la condición de exposici

Experimental immunologically mediated aplastic anemia (AA) in mice: cyclosporin A fails to protect against AA

International Nuclear Information System (INIS)

Knospe, W.H.; Steinberg, D.; Gratwohl, A.; Speck, B.

1984-01-01

Immunologically mediated aplastic anemia (AA) in mice was induced by the i.v. injection of 10(7) lymph node cells (LNC) from H-2k identical but Mls mismatched CBA/J donor mice into previously irradiated (600 rad total body gamma) C3H/HeJ mice. Cyclosporin A (CsA), 25 mg/kg, was administered subcutaneously from day -1 to day 30. Control mice included C3H/HeJ mice which received 600 rad alone, C3H/HeJ mice which received 600 rad plus CsA as above, and C3H/HeJ mice which received 600 rad total body irradiation followed by 10(7) LNC from CBA/J donors. CsA failed to prevent lethal AA. These results suggest that the pathogenetic mechanisms operating in immunologically mediated AA differ from the mechanisms operating in rodents transplanted with allogeneically mismatched marrow or spleen cells which develop graft-versus-host disease. The results are consistent with a non-T cell-dependent mechanism causing the AA

Estudo fotoelástico do controle vertical com o arco de dupla chave na técnica Straight wire Photoelastic study of the vertical control with double key loop archwire in the Straight wire technique

Directory of Open Access Journals (Sweden)

Adriano Dobranszki

2009-08-01

Full Text Available INTRODUÇÃO: em alguns casos, a extração de pré-molares torna-se necessária e nem sempre os espaços são completamente fechados após o alinhamento e nivelamento. O arco de dupla chave, ou Double Key Loop (DKL, é um arco retangular de aço para retração, com duas alças - uma mesial e outra distal ao canino. OBJETIVOS: este trabalho propôs-se a estudar o local onde a força é exercida, após a ativação desse arco, utilizando ativação na alça distal, ativação entre as alças e na alça distal, e ativação com Gurin®. MÉTODOS: foram montados nove modelos fotoelásticos de um arco dentário inferior, sem os primeiros pré-molares e os terceiros molares, com braquetes In-Ovation e arco DKL. O arco foi ativado e a região de incisivos, caninos e dentes posteriores foi fotografada, com interposição de filtros polarizadores de luz. RESULTADOS E CONCLUSÕES: após a análise do modelo fotoelástico, concluiu-se que a ativação com Gurin® pode produzir movimento de retração anterior com componente extrusivo; a ativação na alça distal pode produzir movimento de retração anterior sem componente extrusivo; e a ativação entre as alças e na alça distal pode produzir movimento de retração anterior com componente intrusivo.INTRODUCTION: There are clinical situations in which the extraction of bicuspids becomes necessary and, eventually, the extraction spaces are completely closed after aligning and leveling the teeth. The Double Key Loop (DKL is a stainless steel arch for retraction, with two loops (keys, one mesial and another distal to the canine. AIM: This study aims to study the area where the force is exerted after the activation of the distal loop, the activation of the loops among themselves and the distal loop, and the activation with Gurin®. METHODS: Nine photoelastic models of the inferior arch were made, without the first bicuspids and the third molars, with In-Ovation brackets and the DKL. With the

Esofagogastrofundoplicatura videolaparoscópica por técnica mista

Directory of Open Access Journals (Sweden)

Bruno Zilberstein

Full Text Available A doença do refluxo gastroesofágico (DRGE é uma patologia freqüente, acometendo cerca de 10% da população geral. Esta incidência tem se elevado nos últimos anos. Tradicionalmente, sua abordagem terapêutica inicial é clínica, porém, o número de indicações cirúrgicas tem aumentado principalmente às custas das vantagens da videolaparoscopia. Durante o período de janeiro de 1993 a março de 1998, 112 pacientes foram submetidos a fundoplicatura e hiatoplastia por videolaparoscopia para o tratamento da DRGE, sendo 62 (55,3% do sexo masculino e 50 (44,7% do sexo feminino. A idade variou de 20 a 90 anos, com média de 40 anos. As indicações cirúrgicas foram doença refratária ao tratamento clínico (76,9%, seguido por esôfago de Barrett (16,1 %, estenose esofágica (3,5%, hemorragia digestiva alta por úlcera esofágica (2,6% e hérnia hiatal paraesofágica (0,9%. Para o procedimento cirúrgico foram utilizados cinco trocartes. A hiatoplastia foi realizada com pontos em "X". Na fundoplicatura, após a passagem do fundo gástrico por trás do esôfago abdominal, inicialmente se realiza um ponto tomando as duas extremidades do fundo gástrico, porém sem fixar esta sutura ao esôfago. A partir daí, mais quatro pontos são realizados, sendo dois acima e dois abaixo deste ponto inicial, de maneira a envolver o esôfago, de modo parcial (2700. O tempo médio de cirurgia foi de 80 minutos e o de internação, de 1,8 dias. Ocorreram duas conversões (1,7%. Não houve mortalidade, e as complicações assinaladas foram pneumotórax (0,9%, enfisema subcutâneo (0,9%, disfagia transitória (26% e disfagia persistente (3,5%. A fundoplicatura mista laparoscópica tem se mostrado um procedimento seguro e eficaz para o tratamento definitivo da DRGE com baixo número de complicações, reunindo as vantagens clássicas da cirurgia laparoscópica: curto período de internação, rápida recuperação e bons resultados estéticos; e às de uma t

Effect of post weld heat treatment on tensile properties and microstructure characteristics of friction stir welded armour grade AA7075-T651 aluminium alloy

Directory of Open Access Journals (Sweden)

P. Sivaraj

2014-03-01

Full Text Available This paper reports the effects of post weld heat treatments, namely artificial ageing and solution treatment followed by artificial ageing, on microstructure and mechanical properties of 12 mm thick friction stir welded joints of precipitation hardenable high strength armour grade AA7075-T651 aluminium alloy. The tensile properties, such as yield strength, tensile strength, elongation and notch tensile strength, are evaluated and correlated with the microhardness and microstructural features. The scanning electron microscope is used to characterie the fracture surfaces. The solution treatment followed by ageing heat treatment cycle is found to be marginally beneficial in improving the tensile properties of friction stir welds of AA7075-T651 aluminium alloy.

Comparación de carga inmediata frente a carga convencional de implantes inmediatos con prótesis fijas de arco completo

OpenAIRE

Peñarrocha Oltra, David

2014-01-01

Comparación de carga inmediata frente a carga convencional de implantes inmediatos con prótesis fijas de arco completo. OBJETIVOS El propósito del estudio fue evaluar las diferencias entre los protocolos de carga inmediata y carga convencional para rehabilitar a pacientes con el maxilar o la mandíbula parcialmente desdentados en los que esté indicada la extracción de todos los dientes remanentes, con prótesis fijas de arco completo sobre implantes dentales inmediatos y no inmediatos, e...

Generación eléctrica por gasificación por arco de plasma de residuos urbanos

OpenAIRE

Sosa, María Isabel; Bussolini, Ignacio

2015-01-01

La presente temática surgió de la realización del trabajo final de I. Bussolini, presentado en la Facultad de Ingeniería de la Universidad Nacional de La Plata para optar por el grado de Ingeniero Industrial. Interesado en la problemática de la generación energética en conjunción con protección del medio ambiente analizó la factibilidad de la instalación de una planta generadora de electricidad conectada al Mercado Eléctrico Mayorista MEM argentino, utilizando la tecnología de gasificación de...

Estudio de las propiedades mecánicas en materiales compuestos de matriz aluminio pulvimetalúrgicos conformados mediante forja o extrusión

Directory of Open Access Journals (Sweden)

Busquets, D.

2005-10-01

Full Text Available We have developed composite materials from AA6061 aluminium alloy powders used as matrix and ceramics powders of boron carbide, silicon carbide and boron nitride, used as reinforcements in 2.5, 5.0, 1.5 and 10 % vol. by mechanical mixing and milling in planetary mill at 360 rpm vial velocity for 4 h followed of hot stamping and extrusion process on green compacts. Mechanical properties obtained from tensile tests are influenced by the heat treatment, reinforcement fractions and nature. Moreover, these mechanical characteristics are dependent from the processing route. Optical and Scanning Electron Microscopy analysis revealed the microstructure of materials and let describe the tripartite relation; structure-processing-properties, of the developed materials.

Partiendo de polvos de aleación de aluminio AA6061 empleada como matriz y de polvos cerámicos de carburo de boro, carburo de silicio y nitruro de boro, utilizados como refuerzo en fracciones volumétricas de 2,5, 5,0, 7,5 y 10 %, se ban desarrollado materiales compuestos, mediante la mezcla y molienda mecánica de estos polvos, en molino planetario a 360 rpm durante 4 h y posterior estampación y extrusión en caliente de compactos en verde. Las propiedades mecánicas se determinaron mediante ensayos de tracción, observándose gran influencia del tratamiento térmico, contenido y naturaleza del refuerzo, sobre estas propiedades. Por otro lado, se encontró que estas características son igualmente dependientes de la ruta de producción de estos materiales. Los análisis llevados a cabo mediante microscopía óptica y microscopía electrónica de barrido, permitieron describir la relación tripartita, estructura-procesamiento-propiedades, de los materiales aquí desarrollados.

Evaluation of interfacial bonding in dissimilar materials of YSZ-alumina composites to 6061 aluminium alloy using friction welding

International Nuclear Information System (INIS)

Uday, M.B.; Ahmad Fauzi, M.N.; Zuhailawati, H.; Ismail, A.B.

2011-01-01

Research highlights: → Friction-welding process. → Joining between ceramic composite and metal alloy. → Slip casting of the yttria stabilized zirconia/alumina composite samples. - Abstract: The interfacial microstructures characteristics of alumina ceramic body reinforced with yttria stabilized zirconia (YSZ) was evaluated after friction welding to 6061 aluminum alloy using optical and electron microscopy. Alumina rods containing 25 and 50 wt% yttria stabilized zirconia were fabricated by slip casting in plaster of Paris (POP) molds and subsequently sintered at 1600 deg. C. On the other hand, aluminum rods were machine down to the required dimension using a lathe machine. The diameter of the ceramic and the metal rods was 16 mm. Rotational speeds for the friction welding were varied between 900 and 1800 rpm. The friction pressure was maintained at 7 MPa for a friction time of 30 s. Optical and scanning electron microscopy was used to analyze the microstructure of the resultant joints, particularly at the interface. The joints were also examined with EDX line (energy dispersive X-ray) in order to determine the phases formed during the welding. The mechanical properties of the friction welded YSZ-Al 2 O 3 composite to 6061 alloy were determined with a four-point bend test and Vickers microhardness. The experimental results showed the degree of deformation varied significantly for the 6061 Al alloy than the ceramic composite part. The mechanical strength of friction-welded ceramic composite/6061 Al alloy components were obviously affected by joining rotational speed selected which decreases in strength with increasing rotational speed.

Synthesis, crystal structure, and properties of the ordered double perovskite Sr_2CoOsO_6

International Nuclear Information System (INIS)

Kumar Paul, Avijit; Reehuis, Manfred; Felser, Claudia; Abdala, Paula M.; Jansen, Martin

2013-01-01

Sr_2CoOsO_6, a new osmium based ordered semiconductor double perovskite was prepared by solid state synthesis from the respective binary oxides. Room temperature PXRD analysis shows the compound to be tetragonal [I4/m; a = 5.5503(1) Aa and c = 7.9320(1) Aa], whereas low temperature synchrotron data refinement has revealed a second monoclinic polymorph [I2/m; a = 5.4969(2) Aa, b = 5.4979(2) Aa, c = 8.0090(1) Aa and γ = 90.527(1) ] with a fully ordered rocksalt arrangement of cobalt and osmium atoms over the perovskite B-sites. Heat capacity and magnetic measurements indicate that Sr_2CoOsO_6 shows antiferromagnetic ordering below T_N = 108 K followed by a second magnetic transition at T_2 = 65 K. It was shown that the change from the tetragonal to the monoclinic phase occurs at T_N. (Copyright copyright 2013 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Parameters controlling the performance of AA319-type alloys Part II. Impact properties and fractography

International Nuclear Information System (INIS)

Li, Z.; Samuel, A.M.; Samuel, F.H.; Ravindran, C.; Doty, H.W.; Valtierra, S.

2004-01-01

The Charpy impact energy of Al-Si-Cu AA319-type alloys was measured in terms of the total absorbed energy. The Charpy specimens were machined from end-chilled castings to incorporate the effect of cooling rate on the impact properties. Unnotched specimens were used to increase the accuracy of the measurements, and to emphasize the effect of microstructure. The influence of the microconstituents on the impact strength was investigated by adding various alloying elements (i.e. Sr, Fe, and P) to the AA319 base alloy, and applying two different heat treatments (T5, and T6). The results show that strontium-modification enhances the impact properties, so that the Sr-modified AA319 alloy exhibits the highest impact properties compared to the base, and other alloys at any given dendrite arm spacing (DAS). The impact energy increases with increase in cooling rate, while iron, and phosphorus additions have a detrimental influence due, respectively, to the formation of β-Al 5 FeSi, and phosphorus oxide particles during solidification. T6 treatment assists in the even distribution, and dissolution of the microconstituents (including the block-like CuAl 2 particles) into the aluminum matrix. With more Cu available for strengthening during aging, the impact toughness is greatly enhanced. In the unmodified AA319 base alloy, crack initiation, and propagation occur mainly through Si-particle fracture, and the mechanism of void coalescence. In the Sr-modified, 1.2% Fe-containing 319 alloys, however, crack initiation takes place through fragmentation of β-Al 5 FeSi, Si, and CuAl 2 or Cu 2 FeAl 7 particles. Crack propagation occurs through cleavage of the β-Fe platelets, and fracture of the Cu-intermetallics, and brittle Si particles. Such samples exhibit very low impact energies

Nanostructured sol-gel coatings doped with cerium nitrate as pre-treatments for AA2024-T3

International Nuclear Information System (INIS)

Zheludkevich, M.L.; Serra, R.; Montemor, M.F.; Yasakau, K.A.; Salvado, I.M. Miranda; Ferreira, M.G.S.

2005-01-01

Nanostructured hybrid sol-gel coatings doped with cerium ions were investigated in the present work as pre-treatments for the AA2024-T3 alloy. The sol-gel films have been synthesized from tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTMS) precursors. Additionally the hybrid sol was doped with zirconia nanoparticles prepared from hydrolyzed tetra-n-propoxyzirconium (TPOZ). Cerium nitrate, as corrosion inhibitor, was added into the hybrid matrix or into the oxide nanoparticles. The chemical composition and the structure of the hybrid sol-gel films were studied by XPS (X-ray photoelectron spectroscopy) and AFM (atomic force microscopy), respectively. The evolution of the corrosion protection properties of the sol-gel films was studied by EIS (electrochemical impedance spectroscopy), which can provide quantitative information on the role of the different pre-treatments. Different equivalent circuits, for different stages of the corrosion processes, were used in order to model the coating degradation. The models were supported by SEM (scanning electron microscopy) measurements. The results show that the sol-gel films containing zirconia nanoparticles present improved barrier properties. Doping the hybrid nanostructured sol-gel coatings with cerium nitrate leads to additional improvement of the corrosion protection. The zirconia particles present in the sol-gel matrix seem to act as nanoreservoirs providing a prolonged release of cerium ions. The nanostructured sol-gel films doped with cerium nitrate can be proposed as a potential candidate for substitution of the chromate pre-treatments for AA2024-T3

Interplay of soft and hard processes and hadron $p_{T}$ spectra in p A and AA collisions

CERN Document Server

Enke, Wang; 10.1103/PhysRevC.64.034901

2001-01-01

Motivated by a schematic model of multiple parton scattering within the Glauber formalism, the transverse momentum spectra in pA and AA collisions are analyzed in terms of a nuclear modification factor with respect to pp collisions. The existing data at the CERN Super Proton Synchrotron energies are shown to be consistent with the picture of Glauber multiple scattering in which the interplay between soft and hard processes and the effect of absorptive processes lead to nontrivial nuclear modification of the particle spectra. Relative to the additive model of incoherent hard scattering, the spectra are enhanced at large p/sub T/ (hard) by multiple scattering while suppressed at low p/sub T/ (soft) by absorptive correction with the transition occurring at around a scale p/sub 0/~1-2 GeV/c that separates soft and hard processes. Around the same scale, the p/sub T / spectra in pp collisions also change from an exponential form at low p/sub T/ to a power-law behavior at high p/sub T/. At very large p/sub T/>>p/sub...

Experimental Study on Dissimilar Friction Stir welding of Aluminium Alloys (5083-H111 and 6082-T6) to investigate the mechanical properties

Science.gov (United States)

Kumar, H. M. Anil; Venkata Ramana, V.; Pawar, Mayur

2018-03-01

Friction stir welding is an innovative technology in the joining realm of metals and alloys. This technique is highly economical and suitable especially for non ferrous alloys compared to ferrous alloys. It finds many applications in various fields of aeronautics, automobile, ship building industries etc. The paper presents the comparative results of mechanical properties such as tensile strength, microstructure, macro structure and hardness on the similar and dissimilar aluminum alloys AA5083-H111 and AA6082-T6 under certain selected variables - constant tool rotational speed, its tilt angle, welding speed using friction stir welding process. It is observed from the experimental results that joint efficiency of dissimilar aluminium alloys is higher than the similar aluminum alloys.

Detecção de cicatrizes de incêndios florestais utilizando a técnica de análise por vetor de mudança na terra indígena sete de setembro - Rondônia / Forest fire scars detection using change-vector analysis in the sete de setembro indigenous land - Rondonia

Directory of Open Access Journals (Sweden)

Philip Martin Fearnside

2012-10-01

Full Text Available A Terra Indígena Sete de Setembro (TISS localiza-se no arco do desmatamento, caracterizada por ser uma região de grande pressão antrópica. Esta condição a torna susceptível às ameaças da degradação florestal por incêndios, exploração madeireira ilegal e corte raso para uso agropecuário. Assim, esse estudo teve por finalidade mapear áreas de floresta afetadas pela ação do fogo no período de 2010 a 2011, utilizando imagens TM/Landsat e a técnica de detecção por análise de vetor de mudança. Os resultados mostraram uma área total de 4.187 hectares de florestas afetadas pelo fogo no interior da TISS, correspondendo a cerca de 1,7 % da área total da terra indígena. O monitoramento de terras indígenas por técnicas de sensoriamento remoto é fundamental para avaliar a vulnerabilidade dessas áreas às pressões humanas.AbstractThe Sete de Setembro Indigenous Land is situated in Brazil’s “arc of deforestation,” which is a region characterized by high anthropic pressure. This makes the reserve susceptible to forest degradation by fires, illegal logging and clearcutting for agriculture and ranching. The purpose of the present study was to map forest areas affected by fire from 2010 to 2011 using TM/Landsat images and the changevector analysis detection technique. The results showed a total area of 4187 hectares of forest affected by fire in the indigenous reserve, or about 1.7% of the total reserve area. Monitoring of indigenous lands by remote sensing techniques is essential in order to evaluate the vulnerability of these areas to pressures from human activities.

A combinatorial matrix of rare earth chloride mixtures as corrosion inhibitors of AA2024-T3: Optimisation using potentiodynamic polarisation and EIS

International Nuclear Information System (INIS)

Muster, T.H.; Sullivan, H.; Lau, D.; Alexander, D.L.J.; Sherman, N.; Garcia, S.J.; Harvey, T.G.; Markley, T.A.; Hughes, A.E.; Corrigan, P.A.; Glenn, A.M.; White, P.A.; Hardin, S.G.; Mardel, J.; Mol, J.M.C.

2012-01-01

A combinatorial matrix of four rare earth chlorides has been evaluated for the corrosion inhibition of aluminium alloy AA2024-T3 in aqueous solution. Two electrochemical techniques, potentiodynamic polarisation (PP) and electrochemical impedance spectroscopy (EIS), were used to evaluate AA2024-T3 corrosion in 0.1 M NaCl with the addition of 10 −3 M of rare earth chloride mixtures at time periods up to 18 h. PP experiments showed rare earth inhibition of up to 98% within the first hour and thereafter corrosion rates were steadily decreased. The open-circuit potential (OCP) of AA2024-T3 decreased as a function of time for all solutions indicating predominantly cathodic inhibition. However, differing trends in the OCP were observed during PP and EIS experiments and are discussed in terms of likely time-dependent mechanisms. A comparative study of optimisation models indicated the best mixture at 10 −3 M total inhibitor concentration was predicted to be 72% cerium (Ce) and 28% (praseodymium (Pr)/lanthanum (La)) ions. As the amount of Ce is decreased from this level the corrosion inhibition is predicted to decrease also, regardless of what other rare earths (La, Pr and Nd) are added alone or in combination. Individually, La, Pr and Nd show varying levels of corrosion inhibition activity, all of which are inferior to that of Ce. If Ce is absent entirely, then a mixture of approximately 50% Pr and 50% Nd is predicted to be preferred. This is one of the first applications of combinatorial design for the optimisation of corrosion inhibitor mixtures.

Caracterización electroquímica de dos materiales de implante tipo titanio para aplicaciones en implantología oral

OpenAIRE

Echavarría Velásquez, Alejandro Iván; Arroyave Posada, Carlos Enrique

2002-01-01

Se presentan los resultados de las evaluaciones electroquímicas para dos materiales de implante certificados para uso odontológico: aleación Ti 6Al 4V (TAV) y titanio comercialmente puro (Ti) en solución de Ringer y en solución de saliva artificial, por medio de las técnicas de espectroscopia de impedancia electroquímica (EIS) y curvas de polarización potenciodinámicas (CP). Los resultados EIS mostraron que los arcos exhibidos en los diagramas de Nyquist disminuyen con el tiempo de inmersión....

Método rápido para la cuantificación de leucocitos sanguíneos y su utilidad en la evaluación del estado de salud en trucha arcoíris Oncorhynchus mykiss

Directory of Open Access Journals (Sweden)

Libertad Alzamora-Gonzales

2015-11-01

Full Text Available El análisis de la proporción y cantidad de células sanguíneas es una forma muy confiable de evaluar el estado de salud en humanos y otras especies. El objetivo fue estandarizar una metodología para la cuantificación rápida de poblaciones de leucocitos sanguíneos de Oncorhynchus mykiss (trucha arcoíris. Se procesaron muestras de leucocitos obtenidos de la sangre de un grupo de truchas juveniles saludables mantenidas en el laboratorio. Las muestras fueron analizadas empleando el minicitómetro Scepter™ y los resultados fueron contrastados con los obtenidos por citometría de flujo. Los histogramas generados por ambos métodos mostraron un máximo correspondiente a la población de linfocitos/trombocitos y otro a la de monocitos/neutrófilos. No se encontraron diferencias significativas entre los resultados de ambos métodos (P > 0,05. El método con el minicitómetro se utilizó para evaluar muestras de truchas procedentes de una piscigranja, el perfil obtenido mostró la disminución significativa de neutrófilos compatible con los signos clínicos de enfermedad observados en los especímenes evaluados. Estos resultados indican que la metodología aplicada es válida y útil para determinar las concentraciones y proporciones celulares en muestras de sangre en trucha arcoíris y permiten el análisis rápido de su estado de salud.

Historic American Landscapes Survey: Arco Naval Proving Ground (Idaho National Laboratory)

Energy Technology Data Exchange (ETDEWEB)

Olson, Christina [Idaho National Lab. (INL), Idaho Falls, ID (United States); Holmer, Marie [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gilbert, Hollie [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-07-01

Based on historical evaluations in 1993 and 1997, historians determined that the then-remaining Arco NPG structures were significant to the nation’s history through their association with World War II . Through ensuing discussions with the SHPO, it was further determined that the infrastructure and associated landscape were also significant. According to provisions of INL’s Cultural Resource Management Plan (CRMP) as legitimized through a 2004 Programmatic Agreement between DOE-ID, the Idaho State Historic Preservation Office (SHPO), and Advisory Council on Historic Preservation (ACHP) historians identified the World War II structures as DOE “Signature Properties”. As defined by DOE-HQ, Signature Properties “denote its [DOE’s] most historically important properties across the complex…and/or those properties that are viewed as having tourism potential.” The INL is a secure site and the INL land and structures are not accessible to the public and, therefore have no “tourism potential”. Although DOE-ID actively sought other uses for the vacant, unused buildings, none were identified and the buildings present safety and health concerns. A condition assessment found lead based paint, asbestos, rodent infestation/droppings, small animal carcasses, mold, and, in CF-633, areas of radiological contamination. In early 2013, DOE-ID notified the Idaho SHPO, ACHP, and, as required by the INL CRMP and PA, DOE-Headquarters Federal Preservation Officer, of their intent to demolish the vacant buildings (CF-606, CF-607, CF-613, CF-632, and CF-633). The proposed “end-state” of the buildings will be either grass and/or gravel pads. Through the NHPA Section 106 consultation process, measures to mitigate the adverse impacts of demolition were determined and agreed to through a Memorandum of Agreement (MOA) between DOE-ID, SHPO, and ACHP. The measures include the development and installation of interpretive signs to be placed at a publicly accessible location

Plasma source ion implantation process for corrosion protection of 6061 aluminum

International Nuclear Information System (INIS)

Zhang, L.; Booske, J.H.; Shohet, J.L.; Jacobs, J.R.; Bernardini, A.J.

1995-01-01

This paper describes results of an investigation of the feasibility of using nitrogen plasma source ion implantation (PSII) treatment to improve corrosion resistance of 6061 aluminum to salt water. Flat Al samples were implanted with various doses of nitrogen. The surface microstructures and profiles of Al and N in the flat samples were examined using transmission electron microscopy (TEM), scanning Auger microprobe, x-ray diffraction. Corrosion properties of the samples and the components were evaluated using both a 500 hour salt spray field test and a laboratory electrochemical corrosion system. The tested samples were then analyzed by scanning electron microscopy. Corrosion measurements have demonstrated that PSII can significantly improve the pitting resistance of 6061 aluminum. By correlating the analytical results with the corrosion test results, it has been verified that the improved corrosion resistance in PSII-treated coupons is due to the formation of a continuous AlN layer. It was also identified that the formation of a continuous AlN layer. It was also identified that the formation of a continuous AlN layer is mainly determined by the bias voltage and the total integrated implantation dose, and relatively insensitive to factors such as the plasma source, pulse length, or frequency

Evaluation of the corrosion resistance of anodized aluminum 6061 using electrochemical impedance spectroscopy (EIS)

International Nuclear Information System (INIS)

Huang Yuelong; Shih Hong; Huang, Huochuan; Daugherty, John; Wu Shun; Ramanathan, Sivakami; Chang, Chris; Mansfeld, Florian

2008-01-01

The corrosion resistance of anodized Al 6061 produced by two different anodizing and sealing processes was evaluated using electrochemical impedance spectroscopy (EIS). The scanning electron microscope (SEM) was employed to determine the surface structure and the thickness of the anodized layers. The EIS data revealed that there was very little change of the properties of the anodized layers for samples that were hard anodized in a mixed acid solution and sealed in hot water over a 365 day exposure period in a 3.5 wt% NaCl solution. The specific admittance A s and the breakpoint frequency f b remained constant with exposure time confirming that the hard anodizing process used in this study was very effective in providing excellent corrosion resistance of anodized Al 6061 over extended exposure periods. Some minor degradation of the protective properties of the anodized layers was observed for samples that were hard anodized in H 2 SO 4 and exposed to the NaCl solution for 14 days

Effects of Friction Stir Welding on Corrosion Behaviors of AA2024-T4 Aluminum Alloy

Directory of Open Access Journals (Sweden)

Ales Steve Korakan

2017-01-01

Full Text Available In this work, the corrosion behavior of welded joints of AA2024-T4 Al alloy produced by friction stir welding process has been investigated. Tests were performed in an aerated 3.5% NaCl aqueous solution with pH = 7 at 20±2°C. Corrosion rate and corrosion morphology of weld regions were evaluated and compared to those of the parent metal. The microstructure of weld nugget, thermomechanical affected zone, heated affected zone, and parent metal were analyzed using scanning electron microscopy and energy dispersive spectroscopy. It was observed that corrosion initiated at FSW related spots and the sizes of local corrosion increased with time.

Abia, AA

African Journals Online (AJOL)

Abia, AA. Vol 4, No 6 (2010) - Articles Studies on the kinetics and intraparticle diffusivities of BOD, colour and TSS reduction from palm oil mill effluent (POME) using boiler fly ash. Abstract PDF. ISSN: 1996-0786. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More ...

Joining of hybrid AA6063-6SiCp-3Grp composite and AISI 1030 steel by friction welding

Directory of Open Access Journals (Sweden)

N. Rajesh Jesudoss Hynes

2017-10-01

Full Text Available Joining of metals and aluminium hybrid metal matrix composites has significant applications in aviation, ship building and automotive industries. In the present work, investigation is carried out on Friction Welding of AISI 1030 steel and hybrid AA6063-6SiCp-3Grpcomposite, that are difficult to weld by fusion welding technique. Silicon carbide and graphite particle reinforced AA6063 matrix hybrid composite was developed successfully using stir casting method and the joining feasibility of AISI1030 steel with AA6063-6SiCp-3Grp hybrid composite was tried out by friction stud welding technique. During friction stage of welding process, the particulates (SiC & Graphite used for reinforcement, tend to increase the viscosity and lead to improper mixing of matrix and reinforcement. This eventually results in lower strength in dissimilar joints. To overcome this difficulty AA1100 interlayer is used while joining hybrid composite to AISI 1030 steel. Experimentation was carried out using Taguchi based design of experiments (DOE technique. Multiple regression methods were applied to understand the relationship between process parameters of the friction stud welding process. Micro structural examination reveals three separate zones namely fully plasticized zone, partially deformed zone and unaffected base material zone. Ultra fine dynamically recrystallized grains of about 341 nm were observed at the fully plasticized zone. EDX analysis confirms the presence of intermetallic compound Fe2Al5 at the joint interface. According to the experimental analysis using DOE, rotational speed and interlayer sheet thickness contribute about 39% and 36% respectively in determining the impact strength of the welded joints. It is found that joining with 0.5 mm interlayer sheet provides efficient joints. Developed regression model could be used to predict the axial shortening distance and impact strength of the welded joint with reasonable accuracy.

The Efficiency of Delone Coverings of the Canonical Tilings MATH {cal T}(*(A_4)) -> T^*(A4) and MATH {cal T}(*(D_6)) -> T^*(D6)

Science.gov (United States)

Papadopolos, Zorka; Kasner, Gerald

This chapter is devoted to the coverings of the two quasiperiodic canonical tilings MATH {cal T}(*(A_4)) -> T^*(A4) and MATH {cal T}(*(D_6)) equiv {cal T}(*(2F)) -> T^*(D6) T^*(2F), obtained by projection from the root lattices A4 and D6, respectively. In the first major part of this chapter, in Sect. 5.2, we shall introduce a Delone covering MATH {cal C}(s_{{cal) T}(*(A_4)}) -> C^sT^*(A4) of the 2-dimensional decagonal tiling MATH {cal T}(*(A_4)) -> T^*(A4). In the second major part of this chapter, Sect. 5.3, we summarize the results related to the Delone covering of the icosahedral tiling MATH {cal T}(*(D_6)) -> T^*(D6), MATH {cal C}_{{cal T}(*(D_6)}) -> CT^*(D6) and determine the zero-, single-, and double- deckings and the resulting thickness of the covering. In the conclusions section, we give some suggestions as to how the definition of the Delone covering might be changed in order to reach some real (full) covering of the icosahedral tiling MATH {cal T}(*(D_6)) -> T^*(D6). In Section 5.2 the definition of the Delone covering is also changed in order to avoid an unnecessary large thickness of the covering.

The fracture of boron fibre-reinforced 6061 aluminium alloy

Science.gov (United States)

Wright, M. A.; Welch, D.; Jollay, J.

1979-01-01

The fracture of 6061 aluminium alloy reinforced with unidirectional and cross-plied 0/90 deg, 0/90/+ or - 45 deg boron fibres has been investigated. The results have been described in terms of a critical stress intensity, K(Q). Critical stress intensity factors were obtained by substituting the failure stress and the initial crack length into the appropriate expression for K(Q). Values were obtained that depended on the dimensions of the specimens. It was therefore concluded that, for the size of specimen tested, the values of K(Q) did not reflect any basic materials property.

Formation And Distribution of Brittle Structures in Friction Stir Welding of AA 6061 To Copper. Influence of Preheat

Directory of Open Access Journals (Sweden)

Seyed Vahid Safi

2016-06-01

Full Text Available In this paper, apart from introducing brand – new warm friction stir welding (WFSW method, the effect of preheating on friction stir welded of copper and aluminum alloys sheets and its influence on improving the mechanical properties of the weld were investigated. Sheets of aluminum alloy 6061 and copper with thickness of 5mm were used. The tool was made of tool steel of grade H13 with a threaded cone shape. Rotational speeds (w of 1200-1400 rpm and traverse speeds (v of 50-100 mm/min were used for better understanding the behavior of the tools during the heat input. The sheets were kept in furnace with temperature of 75 ˚C and 125˚C and welding was done afterwards. At last, tensile and micro hardness tests were done to compare the mechanical properties of the welds. Considering to the high thermal conductivity of both copper and aluminum, the reason of increase in strength of the joints could be related to the low temperature gradient between the weld zone and base metal because the heat gets out of the stir zone with lower steep. A significant increase in hardness is observed in the SZ for the following reasons: (i the presence of concentric grains with intensely refined recrystallization and (ii the presence of intermetallic compounds. The tensile test results showed 85% increase in the strength of preheated joints. The maximum strength occurs for preheating of 75˚C, rotational speed of 1200 rpm and traverse speed of 50 mm/min. In the present study, intermetallic compounds and the precipitates are moved to the grain boundaries during the welding process. These precipitates act as strong obstacles to the movements of dislocations and increase the deformation resistance of material. This phenomenon may result in locking of grain boundaries and consequently decrease of grain size. This grain refinement can improve the mechanical properties of welds. Accordingly, hardness and strength of the material will be increased.

Advanced neutron source materials surveillance program

International Nuclear Information System (INIS)

Heavilin, S.M.

1995-01-01

The Advanced Neutron Source (ANS) will be composed of several different materials, one of which is 6061-T6 aluminum. Among other components, the reflector vessel and the core pressure boundary tube (CPBT), are to be made of 6061-T6 aluminum. These components will be subjected to high thermal neutron fluences and will require a surveillance program to monitor the strength and fracture toughness of the 6061-T6 aluminum over their lifetimes. The purpose of this paper is to explain the steps that were taken in the summer of 1994 toward developing the surveillance program. The first goal was to decide upon standard specimens to use in the fracture toughness and tensile testing. Second, facilities had to be chosen for specimens representing the CPBT and the reflector vessel base, weld, and heat-affected-zone (HAZ) metals. Third, a timetable had to be defined to determine when to remove the specimens for testing

AA, bending magnet, BLG

CERN Multimedia

CERN PhotoLab

1980-01-01

The very particular lattice of the AA required 2 types of dipole (bending magnets; BLG, long and narrow; BST, short and wide). The BLG had a steel length of 4.70 m, a good field width of 0.24 m, and a weight of about 70 t. Jean-Claude Brunet inspects the lower half of a BLG. For the BST magnets see 7811105 and 8006036.

Biologia reproductiva y estimaciones de poblaciones de la trucha arco iris salmo gairdneri, en dos ríos montañosos de costa Rica

Directory of Open Access Journals (Sweden)

Debbie Irwin

2016-03-01

También los peces adultos usualmente migran río abajo después del desove y exhiben un comportamiento de territorialidad, lo cual crea mayor dispersión. Se sacrificaron de 5 a 7 individuos por semana para estudiar su biología reproductiva. La proporción de hembras a machos fue de 1,3: 1, indicando esto una distribución aproximadamente igual entre los sexos. Los meses de marzo a abril son los últimos de la época de desove, la cual se calcula comienza en enero. La mayoría de los peces muestreados tenían sus gónadas en las 3 primeras etapas de desarrollo. Unos pocos se encontraron desovando activamente o recientemente gastados. Todo indica que la trucha Arco Iris se reproduce naturalmente en Costa Rica.

Mechanical properties of aluminium–copper–lithium alloy AA2195 at cryogenic temperatures

International Nuclear Information System (INIS)

Nayan, Niraj; Narayana Murty, S.V.S.; Jha, Abhay K.; Pant, Bhanu; Sharma, S.C.; George, Koshy M.; Sastry, G.V.S.

2014-01-01

Highlights: • 4 mm thick sheet of AA2195 was imparted T87 temper. • 7% cold work to impart T87 was given by combination of cold rolling and stretching. • Mechanical properties were evaluated at RT and cryogenic temperatures. • Strength of AA2195 are superior to the conventional aluminum alloy 2219 at all temperatures. • Strength decreases with decrease in temperature whereas ductility remains unchanged. - Abstract: Tensile testing was performed on a 4 mm thick sheet of the aluminum–lithium alloy AA2195 in T87 (solution treatment + water quenching + 7% cold work + peak aging) temper which was subjected to 7% cold working by combination of cold rolling and stretching, over a temperature range from ambient to liquid hydrogen (20 K) conditions. Properties were evaluated in longitudinal as well as transverse directions to characterize anisotropy with respect to strength and ductility. Strength and ductility were compared to the conventional aluminum alloy AA2219-T87, developed for similar cryogenic applications. Decreases in test temperature led to higher strengths with little or no change in ductility. As the temperature decreases, the differences between ultimate tensile strength as well as yield strength for two different combinations of cold roll and stretch studied in the present work, narrows down and become equal at 20 K

Non-Linear MDT Drift Gases like Ar/CO2

CERN Document Server

Aleksa, Martin

1998-01-01

Detailed measurements and simulations have been performed, investigating the properties of Ar/CO2 mixtures as a MDT drift gas. This note presents these measurements and compares them to other drift gases that have been simulated using GARFIELD, HEED and MAGBOLTZ.This note also describes systematic errors to be considered in the operation of precision drift chambers using such gases. In particular we analyze effects of background rate variations, gas-density changes, variations of the gas composition, autocalibration, magnetic field differences and non-concentricity of the wire. Their impact on the reconstructed muon momentum resolution was simulated with DICE/ATRECON.The different properties of linear and non-linear drift gases and their relative advantages and disadvantages are discussed in detail.

Transcriptome profiling of the intoxication response of Tenebrio molitor larvae to Bacillus thuringiensis Cry3Aa protoxin.

Science.gov (United States)

Oppert, Brenda; Dowd, Scot E; Bouffard, Pascal; Li, Lewyn; Conesa, Ana; Lorenzen, Marcé D; Toutges, Michelle; Marshall, Jeremy; Huestis, Diana L; Fabrick, Jeff; Oppert, Cris; Jurat-Fuentes, Juan Luis

2012-01-01

Bacillus thuringiensis (Bt) crystal (Cry) proteins are effective against a select number of insect pests, but improvements are needed to increase efficacy and decrease time to mortality for coleopteran pests. To gain insight into the Bt intoxication process in Coleoptera, we performed RNA-Seq on cDNA generated from the guts of Tenebrio molitor larvae that consumed either a control diet or a diet containing Cry3Aa protoxin. Approximately 134,090 and 124,287 sequence reads from the control and Cry3Aa-treated groups were assembled into 1,318 and 1,140 contigs, respectively. Enrichment analyses indicated that functions associated with mitochondrial respiration, signalling, maintenance of cell structure, membrane integrity, protein recycling/synthesis, and glycosyl hydrolases were significantly increased in Cry3Aa-treated larvae, whereas functions associated with many metabolic processes were reduced, especially glycolysis, tricarboxylic acid cycle, and fatty acid synthesis. Microarray analysis was used to evaluate temporal changes in gene expression after 6, 12 or 24 h of Cry3Aa exposure. Overall, microarray analysis indicated that transcripts related to allergens, chitin-binding proteins, glycosyl hydrolases, and tubulins were induced, and those related to immunity and metabolism were repressed in Cry3Aa-intoxicated larvae. The 24 h microarray data validated most of the RNA-Seq data. Of the three intoxication intervals, larvae demonstrated more differential expression of transcripts after 12 h exposure to Cry3Aa. Gene expression examined by three different methods in control vs. Cry3Aa-treated larvae at the 24 h time point indicated that transcripts encoding proteins with chitin-binding domain 3 were the most differentially expressed in Cry3Aa-intoxicated larvae. Overall, the data suggest that T. molitor larvae mount a complex response to Cry3Aa during the initial 24 h of intoxication. Data from this study represent the largest genetic sequence dataset for T. molitor

Transcriptome profiling of the intoxication response of Tenebrio molitor larvae to Bacillus thuringiensis Cry3Aa protoxin.

Directory of Open Access Journals (Sweden)

Brenda Oppert

Full Text Available Bacillus thuringiensis (Bt crystal (Cry proteins are effective against a select number of insect pests, but improvements are needed to increase efficacy and decrease time to mortality for coleopteran pests. To gain insight into the Bt intoxication process in Coleoptera, we performed RNA-Seq on cDNA generated from the guts of Tenebrio molitor larvae that consumed either a control diet or a diet containing Cry3Aa protoxin. Approximately 134,090 and 124,287 sequence reads from the control and Cry3Aa-treated groups were assembled into 1,318 and 1,140 contigs, respectively. Enrichment analyses indicated that functions associated with mitochondrial respiration, signalling, maintenance of cell structure, membrane integrity, protein recycling/synthesis, and glycosyl hydrolases were significantly increased in Cry3Aa-treated larvae, whereas functions associated with many metabolic processes were reduced, especially glycolysis, tricarboxylic acid cycle, and fatty acid synthesis. Microarray analysis was used to evaluate temporal changes in gene expression after 6, 12 or 24 h of Cry3Aa exposure. Overall, microarray analysis indicated that transcripts related to allergens, chitin-binding proteins, glycosyl hydrolases, and tubulins were induced, and those related to immunity and metabolism were repressed in Cry3Aa-intoxicated larvae. The 24 h microarray data validated most of the RNA-Seq data. Of the three intoxication intervals, larvae demonstrated more differential expression of transcripts after 12 h exposure to Cry3Aa. Gene expression examined by three different methods in control vs. Cry3Aa-treated larvae at the 24 h time point indicated that transcripts encoding proteins with chitin-binding domain 3 were the most differentially expressed in Cry3Aa-intoxicated larvae. Overall, the data suggest that T. molitor larvae mount a complex response to Cry3Aa during the initial 24 h of intoxication. Data from this study represent the largest genetic sequence

Colostomía laparoscópica por puerto único con técnica de guante

Directory of Open Access Journals (Sweden)

José L. Rodicio Miravalles

2014-06-01

Full Text Available La cirugía por puerto único con técnica de guante (glove port es un abordaje adecuado al momento económico y tecnológico que vivimos. Entre las intervenciones susceptibles de su aplicación está la realización de colostomías. Describimos la técnica quirúrgica y resultados de los pacientes a los que se realizó colostomía por puerto único con técnica de guante, a lo largo de los años 2011 y 2012, en dos hospitales de Asturias, España. Realizamos seis colostomías sigmoideas. Cuatro pacientes presentaban enfermedad tumoral, otro caso fue por una fascitis necrosante perineal, y el sexto un paciente con enfermedad de Crohn y fístulas perianales complejas. La edad media de los pacientes, cuatro hombres y dos mujeres, fue de 54 años (rango 42-67 años. El tiempo medio de intervención fue de 42 minutos (rango 30-65 minutos. No hubo complicaciones durante la cirugía ni en el postoperatorio. En nuestro medio, el gasto en material se redujo a la mitad con respecto a otros dispositivos convencionales de puerto único. La técnica de guante representa el abordaje por puerto único más económico y mínimamente invasivo para la realización de estomas, siendo en nuestra experiencia una técnica sencilla, segura y fácilmente reproducible.

Manufatura Aditiva: o papel da soldagem nesta janela de oportunidade

Directory of Open Access Journals (Sweden)

Eduardo André Alberti

2014-06-01

Full Text Available A manufatura aditiva (MA é uma evolução da prototipagem rápida no sentido que cria um produto físico a partir de um arquivo digital (CAD 3D, entretanto sua utilização extrapola a produção de protótipos. Esta técnica envolve o projeto de um componente em camadas, estas multicamadas são depositadas por processos de soldagem produzindo o componente sem a necessidade de moldes ou outras ferramentas. Inicialmente esta tecnologia quase se restringia a processos de alta densidade de energia entretanto a busca por maior competitividade levou utilização de processos de soldagem a arco, utilizando material de adição na forma de arame ou de pó. Este trabalho tem por objetivo revisar as informações mais recentes com particular destaque para a MA utilizando processos a arco. São destacados os desafios envolvidos na fabricação de componentes por MA tanto na deposição das multicamadas como na fase de acabamento.

Investigation into the stress corrosion cracking properties of AA2099, an aluminum-lithium-copper alloy

Science.gov (United States)

Padgett, Barbara Nicole

Recently developed Al-Li-Cu alloys show great potential for implementation in the aerospace industry because of the attractive mix of good mechanical properties and low density. AA2099 is an Al-Li-Cu alloy with the following composition Al-2.69wt%Cu-1.8wt%Li-0.6wt%Zn-0.3wt%Mg-0.3wt%Mn-0.08wt%Zr. The environmental assisted cracking and localized corrosion behavior of the AA2099 was investigated in this thesis. The consequences of uncontrolled grain boundary precipitation via friction stir welding on the stress corrosion cracking (SCC) behavior of AA2099 was investigated first. Using constant extension rate testing, intergranular corrosion immersion experiments, and potentiodynamic scans, the heat-affected zone on the trailing edge of the weld (HTS) was determined to be most susceptible of the weld zones. The observed SCC behavior for the HTS was linked to the dissolution of an active phase (Al2CuLi, T1) populating the grain boundary. It should be stated that the SCC properties of AA2099 in the as-received condition were determined to be good. Focus was then given to the electrochemical behavior of precipitate phases that may occupy grain and sub-grain boundaries in AA2099. The grain boundary micro-chemistry and micro-electrochemistry have been alluded to within the literature as having significant influence on the SCC behavior of Al-Li-Cu alloys. Major precipitates found in this alloy system are T1 (Al 2CuLi), T2 (Al7.5Cu4Li), T B (Al6CuLi3), and theta (Al2 Cu). These phases were produced in bulk form so that the electrochemical nature of each phase could be characterized. It was determined T1 was most active electrochemically and theta was least. When present on grain boundaries in the alloy, electrochemical behavior of the individual precipitates aligned with the observed corrosion behavior of the alloy (e.g. TB was accompanied by general pitting corrosion and T 1 was accompanied by intergranular corrosion attack). In addition to the electrochemical behavior of

Hardness Optimization for Al6061-MWCNT Nanocomposite Prepared by Mechanical Alloying Using Artificial Neural Networks and Genetic Algorithm

Directory of Open Access Journals (Sweden)

Mehrdad Mahdavi Jafari

2017-06-01

Full Text Available Among artificial intelligence approaches, artificial neural networks (ANNs and genetic algorithm (GA are widely applied for modification of materials property in engineering science in large scale modeling. In this work artificial neural network (ANN and genetic algorithm (GA were applied to find the optimal conditions for achieving the maximum hardness of Al6061 reinforced by multiwall carbon nanotubes (MWCNTs through modeling of nanocomposite characteristics. After examination the different ANN architectures an optimal structure of the model, i.e. 6-18-1, is obtained with 1.52% mean absolute error and R2 = 0.987. The proposed structure was used as fitting function for genetic algorithm. The results of GA simulation predicted that the combination sintering temperature 346 °C, sintering time 0.33 h, compact pressure 284.82 MPa, milling time 19.66 h and vial speed 310.5 rpm give the optimum hardness, (i.e., 87.5 micro Vickers in the composite with 0.53 wt% CNT. Also, sensitivity analysis shows that the sintering time, milling time, compact pressure, vial speed and amount of MWCNT are the significant parameter and sintering time is the most important parameter. Comparison of the predicted values with the experimental data revealed that the GA–ANN model is a powerful method to find the optimal conditions for preparing of Al6061-MWCNT.

Kinetics of manganese in MAG/MIG welding with a 18/8/6 wire

Directory of Open Access Journals (Sweden)

Tušek, Janez

2001-06-01

aumentando con el incremento de la tensión convencional del arco. Mayor longitud en el arco, supone más tiempo de exposición al arco en estado fundido del material de aportación y también la penetración es más ancha, lo que aumenta la evaporación del vapor del manganeso del metal fundido del alambre. En el artículo se ha hecho también un análisis de las medidas de la dureza a través de la unión soldada. Se ha comprobado que la dureza no había aumentado en el metal fundido y que tampoco se obtuvieron estructuras martensíticas en la zona térmicamente afectada. La más importante conclusión del análisis es que el consumo del manganeso del alambre 18/8/6 durante el soldeo del acero inoxidable austenítico con acero ferrítico poco aleado es bastante alto, del 20 % al 30 %, sin embargo, este alambre es excelente para la soldadura de varios tipos de acero.

Effect of TiC addition on fracture toughness of Al6061 alloy

Science.gov (United States)

Raviraj, M. S.; Sharanprabhu, C. M.; Mohankumar, G. C.

2018-04-01

Al 6061 matrix was reinforced with different proportions of TiC particles such as 3wt%, 5wt% and 7wt% and the effect on fracture toughness was studied. Al-TiC metal matrix composites were produced by stir casting method to ensure uniform distribution of the TiC particulates in the Al matrix. LEFM (Linear Elastic Fracture Mechanics) has been used to characterize the fracture toughness using various specimen geometries. The compact tension (CT) specimens with straight through notch were machined as per ASTM E399 specifications. All the specimens were machined to have constant a/W=0.5 and B/W was varied from 0.2 to 0.7. A sharp crack initiation was done at the end of notch by fatigue loading using servo-hydraulic controlled testing machine. Load v/s crack mouth opening displacement (CMOD) data was plotted and stress intensity factor, KQ determined. Critical stress intensity factor KIC was obtained by plotting KQ v/s thickness of specimen data. The fracture toughness of the composites varied between 16-19 MPa√m as compared to 23MPa√m for base alloy Al6061. Composites with 3wt% and 7wt% TiC showed better fracture toughness than 5wt% TiC reinforced Al metal matrix composites.

Otimização de Parâmetros do Processo de Soldagem Arco Submerso para Revestimentos Anticorrosivos

Directory of Open Access Journals (Sweden)

Marcos Mesquita da Silva

2016-03-01

Full Text Available Resumo Neste trabalho foi avaliada a influência das variáveis de soldagem em cordões de solda, aplicados pelo processo Arco Submerso (SAW com corrente convencional, visando futura aplicação em revestimentos metálicos contra corrosão. Segmentos de tubo de um aço API 5L Gr B foram utilizados como substrato, além da utilização de um metal de adição de liga de níquel, diâmetro de 1,13mm, classificação AWS ERNiCrMo-4 (Hastelloy C-276, e um fluxo do tipo neutro, básico e aglomerado (EN 760: SA AF 2 DC. Foram analisadas as variáveis tensão, velocidade de alimentação de arame e distância do bico de contato à peça (DBCP – com o restante dos parâmetros constantes – através de um planejamento fatorial completo em dois níveis e pontos centrais. Os resultados mostraram modelos matemáticos estatisticamente significativos e preditivos para as respostas diluição e corrente média, IM. Porém, para a resposta Reforço/Largura (R/L, o modelo se caracterizou como estatisticamente significativo, não preditivo e contendo uma falta de ajuste. A DBCP, por sua vez, foi a variável que se constituiu como a de maior significância na redução da diluição.

Evaluation of the corrosion resistance of anodized aluminum 6061 using electrochemical impedance spectroscopy (EIS)

Energy Technology Data Exchange (ETDEWEB)

Huang Yuelong [Corrosion and Environmental Effects Laboratory (CEEL), Mork Family Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, CA 90089-0241 (United States); Shih Hong [Lam Research Corporation, 4400 Cushing Parkway, Fremont, CA 94538 (United States)], E-mail: hong.shih@lamrc.com; Huang, Huochuan; Daugherty, John; Wu Shun; Ramanathan, Sivakami; Chang, Chris [Lam Research Corporation, 4400 Cushing Parkway, Fremont, CA 94538 (United States); Mansfeld, Florian [Corrosion and Environmental Effects Laboratory (CEEL), Mork Family Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, CA 90089-0241 (United States)], E-mail: mansfeld@usc.edu

2008-12-15

The corrosion resistance of anodized Al 6061 produced by two different anodizing and sealing processes was evaluated using electrochemical impedance spectroscopy (EIS). The scanning electron microscope (SEM) was employed to determine the surface structure and the thickness of the anodized layers. The EIS data revealed that there was very little change of the properties of the anodized layers for samples that were hard anodized in a mixed acid solution and sealed in hot water over a 365 day exposure period in a 3.5 wt% NaCl solution. The specific admittance A{sub s} and the breakpoint frequency f{sub b} remained constant with exposure time confirming that the hard anodizing process used in this study was very effective in providing excellent corrosion resistance of anodized Al 6061 over extended exposure periods. Some minor degradation of the protective properties of the anodized layers was observed for samples that were hard anodized in H{sub 2}SO{sub 4} and exposed to the NaCl solution for 14 days.

Fatigue crack growth rate behaviour of friction-stir aluminium alloy AA2024-T3 welds under transient thermal tensioning

International Nuclear Information System (INIS)

Ilman, M.N.; Kusmono,; Iswanto, P.T.

2013-01-01

Highlights: • FSW enables unweldable aircraft material AA2024-T3 to be welded without cracking. • FSW applied to aircraft structure is required to have superior fatigue resistance. • Transient thermal tensioning (TTT) is being developed for stress relieving in FSW. • The fatigue crack growth rates of FSW joints under TTT are studied. - Abstract: Friction stir welding (FSW) has become a serious candidate technology to join metallic fuselage panels for the next generation of civil aircrafts. However, residual stress introduced during welding which subsequently affects fatigue performance is still a major problem that needs to be paid attention. The present investigation aims to improve fatigue crack growth resistance of friction stir aluminium alloy AA2024-T3 welds using transient thermal tensioning (TTT) treatment. In this investigation, aluminium alloy AA2024-T3 plates were joined using FSW process with and without TTT. The welding parameters used including tool rotation speed (Rt) and the plate travelling speed (v) were 1450 rpm and 30 mm/min respectively. The TTT treatments were carried out by heating both sides of friction stir weld line using moving electric heaters ahead of, beside and behind the tool at a heating temperature of 200 °C. Subsequently, a sequence of tests was carried out including microstructural examination, hardness measurement, tensile test and fatigue crack growth rate (FCGR) test in combination with fractography using scanning electron microscopy (SEM). The FCGR test was carried out using a constant amplitude fatigue experiment with stress ratio (R) of 0.1 and frequency (f) of 11 Hz whereas specimens used were centre-crack tension (CCT) type with the initial crack located at the weld nugget. Results of this investigation showed that at low ΔK, typically below 9 MPa m 0.5 , the friction stir welds under TTT treatments lowered fatigue crack growth rate (da/dN) and the lowest (da/dN) was achieved as the heaters were located ahead of

por aplicación de 6-bencilaminopurina

Directory of Open Access Journals (Sweden)

Aaran A. Morales P.

2015-01-01

Full Text Available La chirimoya (Annona cherimola Mill. es climatérica, su vida poscosecha se acorta por el bronceado de cáscara y ablandamiento del fruto. El objetivo de esta investigación fue evaluar el efecto poscosecha de la aplicación de 6-bencilaminopurina (BAP en chirimoya ‘Fino de Jete’. Los frutos se seleccionaron aleatoriamente de la parte media y basal de la copa de seis árboles y se les aplicó 1,0 mM o 0 mM BAP. Los frutos permanecieron en el árbol 8 y 15 días después de la aplicación; después de la cosecha se transportaron por 1,5 h y se almacenaron en refrigeración (TR (6 °C o temperatura ambiente (TA (16 ± 2 °C. A partir de 1 y hasta 15 días después de cosecha (DDC, cada tercer día se analizó pérdida de peso, color L*, a* y b*, firmeza y deformación de fruto. Después de 15 días de almacenamiento a TA, 1 mM BAP aplicado en cualquier fecha redujo el oscurecimiento poscosecha de la cáscara, conservando el color L* más de 35% en relación al control (ρ ≤ 0,05.

REGRESIÓN BAYESIANA LINEAL PARA CALIBRAR LOS PARÁMETROS DE UN MODELO DE HORNO DE ARCO

Directory of Open Access Journals (Sweden)

Jesser James Marulanda Durango

2013-01-01

Full Text Available Este documento presenta la calibración de los parámetros de un modelo de horno de arco eléctrico, que tiene en cuenta la naturaleza no lineal y la impedancia variable que exhibe este tipo de carga. A partir de la ecuación diferencial no lineal que describe la característica estática voltaje-corriente del arco eléctrico, se establece una ecuación equivalente lineal que facilita el ajuste de las constantes del modelo, usando mediciones reales de voltaje y de corriente tomadas en la etapa más crítica de la operación del horno. Se muestra el procedimiento de ajuste de los parámetros del modelo usando regresión Bayesiana Lineal. Se presenta a través de gráficas, la relación entre los parámetros del modelo de la etapa determinista y el comportamiento de la varianza de las funciones de densidad de probabilidad Gaussianas a posterior con el número de datos usados para la calibración del modelo. La validación de los resultados obtenidos se realiza simulando el modelo con los parámetros estimados para luego comparar éstos con mediciones reales. Se ha utilizado un medidor de Flicker que cumple con el estándar CEI IEC 61000-4-15 para determinar la Sensación Instantánea de Flicker (IFL de las fluctuaciones presentes en las formas de onda reales y simuladas de las corrientes del arco eléctrico. Adicionalmente, se presenta en una gráfica el contenido armónico real y simulado de las corrientes de fase generadas en el horno.

Recubrimientos por PVD decorativos sobre cerámicas

Directory of Open Access Journals (Sweden)

García, J. A.

2006-08-01

Full Text Available During the last years PVD coatings has been used for decorative purposes on ceramics and other substrates. Standards layers like TiN, CrN, TiCN, etc, give us the possibly of obtaining a wide range of colours, with a good mechanical, chemical properties. This paper gathers the works carried out in the Center of Advance Surface engineering of AIN during the three last years in the field of the decorative coatings. Different layer have been deposited by means of a METAPLAS 232 PVD equipment. A complete chemical and mechanical characterisation have been carried out on the different deposited layers like ultramicroindentation, scratch tests, wear resistance and GDOES.

En los últimos años se ha venido estudiado la aplicabilidad de las técnicas de depósitos mediante métodos físicos en fase vapor (PVD, para la realización de recubrimientos sobre cerámicas y otros substratos con fines decorativos. Los recubrimientos estándar por PVD como el TiN, CrN, TiCN, etc, ofrecen la posibilidad de conseguir acabados de apariencia metálica, de una amplia gama de colores, y con buenas propiedades mecánicas y químicas, como resistencia a la abrasión, estabilidad térmica, o resistencia a la corrosión. En este trabajo se recogen las experiencias realizadas en el recubrimiento y caracterización de cerámicas decorativas, durante los tres últimos años, en el Centro de Ingeniería de Superficies de la Asociación de la Industria Navarra. Los distintos tipos de recubrimientos se han realizado mediante un equipo de PVD modelo METAPLAS 232, con seis evaporadores de arco eléctrico y sistema de limpieza iónica patentado AEGD. Los recubrimientos han sido caracterizados, tanto química como mecánicamente, empleando las más modernas técnicas tribológicas (ultramicrodureza, scrascth tests, resistencia al desgaste... y espectroscópicas óptica por descarga luminiscente (GDOES. Los resultados obtenidos muestran que las técnicas de PVD son una

Espectroscopia multi-objeto e imageamento de Abell 586 com GMOS - o estado dinâmico de um aglomerado de galáxias com arcos gravitacionais

Science.gov (United States)

Cypriano, E. S.; Sodré, L., Jr.; Kneib, J.-P.; Campusano, L.

2003-08-01

Nesse trabalho é apresentado um estudo do conteúdo de massa do aglomerado de galáxias A586 (z = 0.171) bem como sua distribuição espacial. Isso foi feito a partir de dados de espectroscopia multi-objeto e imageamento obtidos com o instrumento GMOS acoplado ao telescópio Gemini-Norte. A massa desse aglomerado foi estudada a partir da posição dos seus arcos gravitacionais (lentes fortes), da medida estatística da distorção na forma das galáxias de fundo (lentes fracas) e através da dispersão de velocidades de uma amostra de cerca de 30 galáxias pertencentes ao aglomerado (teorema do virial). Os dois primeiros métodos não dependem do estado dinâmico do aglomerado, enquanto que o terceiro sim. Desse modo, comparando seus resultados pode-se estimar o grau de relaxamento desse sistema. Dados de raios X presentes na literatura também serão incluídos nessa análise. Nossos resultados preliminares a partir das técnicas de lentes fracas, mostram que, supondo que a distribuição de massa desse aglomerado seja a de uma esfera isotérmica, espera-se que ele apresente uma dispersão de velocidades de 1330+/-78 km s-1, em contradicao com medidas similares feitas por Dahle et al. 2002 que encontram valores tão altos quanto 1680 km s-1. Já o estudo dinâmico resultou numa dispersão de velocidades de ~950 km s-1.

Tool material effect on the friction stir butt welding of AA2124-T4 Alloy Matrix MMC

Directory of Open Access Journals (Sweden)

Yahya Bozkurt

2018-01-01

Full Text Available The purpose of the present work is to study on the effect of material properties tool on friction stir butt welding of AA2124-T4 alloy matrix MMC. Uncoated tool, coated tool with a CrN, and coated tool with AlTiN were used to weld aluminum MMC plates. Macrostructure and microstructure observations, ultimate tensile strength, wear resistance, and chemical analysis were carried out to determine the appropriate tool for joining these composite plates. Results showed that the good welded joints could be obtained when a tool is coated with AlTiN.

Cuantificación de la contaminación del gas de protección en procesos de soldadura con arco eléctrico por medio de mediciones de oxígeno en la superficie del material base Quantification of contamination of the shielding gas in arc welding processes through measurement of oxygen on the surface of the base material

Directory of Open Access Journals (Sweden)

Julio Fuentes-Muñoz

2012-09-01

Full Text Available A metodologia apresentada neste trabalho se baseia em medições do teor de oxigênio na superfície do metal base, possibilitando assim, uma avaliação quantitativa da contaminação do gás de proteção. Os gases utilizados nos processos de soldagem definem as características do arco e protegem a poça de soldagem. A contaminação do gás, por exemplo, com o ar do meio ambiente, prejudica as propriedades da união soldada. A contaminação do gás de proteção não é somente dependente da qualidade do gás utilizado, como também tem que ser considerado os componentes contidos na tocha. Até agora, o nível da contaminação do gás produzido pela tocha tem sido analisado somente de forma empírica, avaliando a qualidade e forma do cordão de solda. A medição do oxigênio na superfície do metal de base é um método simples e preciso para analisar o nível de contaminação do gás de proteção. Este procedimento permite uma avaliação quantitativa, inclusive na presença do arco. No contexto deste trabalho se apresentará por meio de exemplos em tochas TIG e MIG/MAG as possibilidades da utilização desta metodologia para o desenvolvimento e análise de processos de soldagem a arco.The method presented in this paper is based on the measurement of oxygen on the surface of the base metal to enable a quantitative assessment of the contamination in the shielding gas. The gas used in arc processes affected arc properties and simultaneously protected the welding pool. The contamination of the shielding gases, e.g. with atmospheric air, damages the properties of the weld joint. The contamination in the shielding gas is not only dependent on the purity of the utilized gas, but also on the components of the welding torch. The level of contamination in the gas produced by the torch had been analyzed so far only by empirical evaluation of the quality and appearance of the welding seam. The measurement of oxygen on the surface of the base