WorldWideScience

Sample records for 2-meter box experiments

  1. DNA Radiation Environments Program: Fall 1989 2-meter box experiments and analysis

    International Nuclear Information System (INIS)

    This effort, sponsored by the Defense Nuclear Agency under the Radiation Environments Program, was carried out to obtain measured data for benchmarking MASH, the Monte Carlo Adjoint Code System. MASH was developed to replace the Vehicle Code System, VCS, that has been used by the Department of Defense and NATO for calculating neutron and gamma-ray radiation fields and shielding protection factors inside armored vehicles and structures from nuclear weapon radiation. Free-field data were obtained at distances of 170- and 400-meters from the APR while in-box measurements were made at 400 meters only. The box, included to obtain neutron and gamma-ray reduction factors, was a 2-meter cube configuration having 0.1016-m-thick steel walls. Calculated data were obtained using MASH by analysts from the Oak Ridge National Laboratory and Science Applications International Corporation. Calculated (C) results were compared with experimental (E) data in terms of C/E ratios. Free-field and in-box neutron kerma generally agreed within ±20%, although some C/E comparisons fell outside this range depending upon the detector against which the calculated data were compared. For those cases where the C/E ratio is marginal or unacceptable, problems in the detector systems were acknowledged to be principal cause of the discrepancy. Generally poor agreement (∼25-35%) was achieved among the C/E ratios for the free-field gamma-ray kerma at the 170- and 400-m locations while excellent (10%, or better) C/E values were obtained for the in-box conditions. The discrepancy for the free-field comparison was attributed to the failure by the analysts to include a tree line adjacent to the measurement site in the calculational geometry. C/E values for the neutron and gamma-ray reduction factors ranged from 1% to 23% depending on the detector. 4 refs., 2 figs., 14 tabs

  2. Turbulence time scales in mixing box experiments

    Energy Technology Data Exchange (ETDEWEB)

    Dohan, K.; Sutherland, B.R. [Department of Mathematical and Statistical Sciences, University of Alberta, Edmonton, AB, T6G 2G1 (Canada)

    2002-11-01

    Laboratory experiments are performed to examine eddy time scales in turbulence generated by an oscillating grid in homogeneous fluid using tanks with varying depth and fixed high aspect ratio horizontal cross-section. For high ratios of depth to width, a mean circulation develops in the form of a pair of counter-rotating vortices. In a new technique, pearlescent dye is employed to measure eddy time scales and to determine their power law scaling dependence on the distance from the oscillating grid. Two scaling regimes are observed, one near the source of turbulence and one at intermediate depths. At intermediate depths, the scaling exponent is found to increase if the total fluid depth is larger. We discuss the significance of these results on the use of the law-of-the-wall scaling in the upper oceanic mixed layer. (orig.)

  3. Gas box control system for Tandem Mirror Experiment-Upgrade

    International Nuclear Information System (INIS)

    The Tandem Mirror Experiment-Upgrade (TMX-U) uses several methods to feed gas (usually deuterium) at different energies into the plasma region of the machine. One is an arrangement of eight high-speed piezo-electric valves mounted on special manifolds (gas box) that feed cold gas directly to the plasma. This paper describes the electronic valve control and data acquisition portions of the gas box, which are controlled by a desk-top computer. Various flow profiles have been developed and stored in the control computer for ready access by the operator. The system uses two modes of operation, one that exercises and characterizes the valves and one that operates the valves with the rest of the experiment. Both the valve control signals and the pressure transducers data are recorded on the diagnostics computer so that they are available for experiment analysis

  4. Monte Carlo simulation experiments on box-type radon dosimeter

    Energy Technology Data Exchange (ETDEWEB)

    Jamil, Khalid, E-mail: kjamil@comsats.edu.pk; Kamran, Muhammad; Illahi, Ahsan; Manzoor, Shahid

    2014-11-11

    Epidemiological studies show that inhalation of radon gas ({sup 222}Rn) may be carcinogenic especially to mine workers, people living in closed indoor energy conserved environments and underground dwellers. It is, therefore, of paramount importance to measure the {sup 222}Rn concentrations (Bq/m{sup 3}) in indoors environments. For this purpose, box-type passive radon dosimeters employing ion track detector like CR-39 are widely used. Fraction of the number of radon alphas emitted in the volume of the box type dosimeter resulting in latent track formation on CR-39 is the latent track registration efficiency. Latent track registration efficiency is ultimately required to evaluate the radon concentration which consequently determines the effective dose and the radiological hazards. In this research, Monte Carlo simulation experiments were carried out to study the alpha latent track registration efficiency for box type radon dosimeter as a function of dosimeter’s dimensions and range of alpha particles in air. Two different self developed Monte Carlo simulation techniques were employed namely: (a) Surface ratio (SURA) method and (b) Ray hitting (RAHI) method. Monte Carlo simulation experiments revealed that there are two types of efficiencies i.e. intrinsic efficiency (η{sub int}) and alpha hit efficiency (η{sub hit}). The η{sub int} depends upon only on the dimensions of the dosimeter and η{sub hit} depends both upon dimensions of the dosimeter and range of the alpha particles. The total latent track registration efficiency is the product of both intrinsic and hit efficiencies. It has been concluded that if diagonal length of box type dosimeter is kept smaller than the range of alpha particle then hit efficiency is achieved as 100%. Nevertheless the intrinsic efficiency keeps playing its role. The Monte Carlo simulation experimental results have been found helpful to understand the intricate track registration mechanisms in the box type dosimeter. This paper

  5. Monte Carlo simulation experiments on box-type radon dosimeter

    Science.gov (United States)

    Jamil, Khalid; Kamran, Muhammad; Illahi, Ahsan; Manzoor, Shahid

    2014-11-01

    Epidemiological studies show that inhalation of radon gas (222Rn) may be carcinogenic especially to mine workers, people living in closed indoor energy conserved environments and underground dwellers. It is, therefore, of paramount importance to measure the 222Rn concentrations (Bq/m3) in indoors environments. For this purpose, box-type passive radon dosimeters employing ion track detector like CR-39 are widely used. Fraction of the number of radon alphas emitted in the volume of the box type dosimeter resulting in latent track formation on CR-39 is the latent track registration efficiency. Latent track registration efficiency is ultimately required to evaluate the radon concentration which consequently determines the effective dose and the radiological hazards. In this research, Monte Carlo simulation experiments were carried out to study the alpha latent track registration efficiency for box type radon dosimeter as a function of dosimeter's dimensions and range of alpha particles in air. Two different self developed Monte Carlo simulation techniques were employed namely: (a) Surface ratio (SURA) method and (b) Ray hitting (RAHI) method. Monte Carlo simulation experiments revealed that there are two types of efficiencies i.e. intrinsic efficiency (ηint) and alpha hit efficiency (ηhit). The ηint depends upon only on the dimensions of the dosimeter and ηhit depends both upon dimensions of the dosimeter and range of the alpha particles. The total latent track registration efficiency is the product of both intrinsic and hit efficiencies. It has been concluded that if diagonal length of box type dosimeter is kept smaller than the range of alpha particle then hit efficiency is achieved as 100%. Nevertheless the intrinsic efficiency keeps playing its role. The Monte Carlo simulation experimental results have been found helpful to understand the intricate track registration mechanisms in the box type dosimeter. This paper explains that how radon concentration from the

  6. Sand box experiments with bioclogging of porous media: Hydraulic conductivity reductions

    DEFF Research Database (Denmark)

    Seifert, Dorte; Engesgaard, Peter

    2012-01-01

    Tracer experiments during clogging and de-clogging experiments in a 2D sand box were via an image analysis used to establish a data set on the relation between changes in hydraulic conductivity (K) and relative porosity (β). Clogging appears to create a finger-like tracer transport, which could......) that makes no assumption on biomass distribution, the plug formation model of Thullner et al. (2002a), and the biofilm-plug formation model of Vandevivere (1995). The plug formation and biofilm-plug formation models both match the observed changes between the hydraulic conductivity of the sand box...

  7. Optimal experiment design for identification of grey-box models

    DEFF Research Database (Denmark)

    Sadegh, Payman; Melgaard, Henrik; Madsen, Henrik;

    1994-01-01

    Optimal experiment design is investigated for stochastic dynamic systems where the prior partial information about the system is given as a probability distribution function in the system parameters. The concept of information is related to entropy reduction in the system through Lindley's measure...... estimation results in a considerable reduction of the experimental length. Besides, it is established that the physical knowledge of the system enables us to design experiments, with the goal of maximizing information about the physical parameters of interest....

  8. Optimal experiment design for identification of grey-box models

    OpenAIRE

    Sadegh, Payman; Melgaard, Henrik; Madsen, Henrik; Holst, Jan

    1994-01-01

    Optimal experiment design is investigated for stochastic dynamic systems where the prior partial information about the system is given as a probability distribution function in the system parameters. The concept of information is related to entropy reduction in the system through Lindley's measure of average information, and the relationship between the choice of information related criteria and some estimators (MAP and MLE) is established. A continuous time physical model of the heat dynamic...

  9. Numerical analysis of biological clogging in two-dimensional sand box experiments

    DEFF Research Database (Denmark)

    Kildsgaard, J.; Engesgaard, Peter Knudegaard

    2001-01-01

    Two-dimensional models for biological clogging and sorptive tracer transport were used to study the progress of clogging in a sand box experiment. The sand box had been inoculated with a strip of bacteria and exposed to a continuous injection of nitrate and acetate. Brilliant Blue was regularly...... injected during the clogging experiment and digital images of the tracer movement had been converted to concentration maps using an image analysis. The calibration of the models to the Brilliant Blue observations shows that Brilliant Blue has a solid biomass dependent sorption that is not compliant......, in the central parts of the clogged area, the observations and simulations clearly show a complex picture of flow diverting the injected nutrients around the clogged area as fingers. The calibration of the model demonstrates that the physical and microbiological processes Žadvection, dispersion, attachment...

  10. Thermal and Mechanical Testing of Neoprene Gloves Used in a Space Shuttle Microgravity Glove Box Experiment

    Science.gov (United States)

    Wingard, Charles Doug; Munafo, Paul M. (Technical Monitor)

    2001-01-01

    Neoprene gloves are used in a Space Shuttle Microgravity Glove Box (MGBX) experiment. In 1999, significant corrosion was observed in the work area and on the outer surface of the left glove ring. Analysis of the corrosion products showed that they contained chlorine. The Neoprene gloves used in this glove box were obtained in 1995, with a recommended shelf life of 3 years. After storage of these gloves in a cabinet drawer until 1999, significant signs of corrosion were also observed in the drawer. Mechanical and thermal properties were determined on samples cut from the finger and sleeve areas of the "good" and "bad" gloves. This data showed significant aging of the left-hand glove, particularly in the sleeve area. Thermal analysis data by DSC and TGA was complimentary to tensile data in showing this aging. However, this test data did not pinpoint the cause of the left-hand glove aging, or of the corrosion products.

  11. Polydispersed Gravity Currents Along a V-Shaped Valley: Experiments and Box Model.

    Science.gov (United States)

    Meriaux, C. A. M. D.; Besson, C. K.

    2014-12-01

    Turbidity currents, which occur at the continental margins and transport sediments along submarines canyons are particulate gravity currents made of poorly sorted particles. In such currents, the flow is to a large extent controlled by the grain size distribution of the particles at the source. Here we present the combined results of a box model and lock-exchange experiments of particulate gravity currents at small volumetric concentrations of particles (Tecnologia (FCT, Portugal) under Project Pest-OE/CTE /LA0019/2013-2014.

  12. Educating the Public about Meteorites and Impacts through Virtual Field Trips and Classroom Experience Boxes

    Science.gov (United States)

    Ashcraft, Teresa; Hines, R.; Minitti, M.; Taylor, W.; Morris, M. A.; Wadhwa, M.

    2014-01-01

    With specimens representing over 2,000 individual meteorites, the Center for Meteorite Studies (CMS) at Arizona State University (ASU) is home to the world's largest university-based meteorite collection. As part of our mission to provide educational opportunities that expand awareness and understanding of the science of meteoritics, CMS continues to develop new ways to engage the public in meteorite and space science, including the opening of a new Meteorite Gallery, and expansion of online resources through upgrades to the CMS website, meteorites.asu.edu. In 2008, CMS was the recipient of a philanthropic grant to improve online education tools and develop loanable modules for educators. These modules focus on the origin of meteorites, and contain actual meteorite specimens, media resources, a user guide, and lesson plans, as well as a series of engaging activities that utilize hands-on materials geared to help students develop logical thinking, analytical skills, and proficiency in STEM disciplines. In 2010, in partnership with the ASU NASA Astrobiology Institute team, CMS obtained a NASA EPOESS grant to develop Virtual Field Trips (VFTs) complemented by loanable “Experience Boxes” containing lesson plans, media, and hands-on objects related to the VFT sites. One VFT-Box pair focuses on the record of the oldest multicellular organisms on Earth. The second VFT-Box pair focuses on the Upheaval Dome (UD) structure, a meteorite impact crater in Utah’s Canyonlands National Park. UD is widely accepted as the deeply eroded remnant of a ~5 kilometer impact crater (e.g. Kriens et al., 1999). The alternate hypothesis that the Dome was formed by the upwelling of salt from a deposit underlying the region (e.g. Jackson et al., 1998) makes UD an ideal site to learn not only about specific scientific principles present in the Next Generation Science Standards, but also the process of scientific inquiry. The VFTs are located on an interactive website dedicated to VFTs, vft

  13. Einstein's Boxes

    OpenAIRE

    Norsen, Travis

    2004-01-01

    At the 1927 Solvay conference, Einstein presented a thought experiment intended to demonstrate the incompleteness of the quantum mechanical description of reality. In the following years, the thought experiment was picked up and modified by Einstein, de Broglie, and several other commentators into a simple scenario involving the splitting in half of the wave function of a single particle in a box. In this paper we collect together several formulations of this thought experiment from the exist...

  14. Numerical models and experiment of air flow in a simulation box for optical wireless communications

    Directory of Open Access Journals (Sweden)

    Latal Jan

    2016-01-01

    Full Text Available In this article, the authors focused on real measurements of mechanical turbulence generated by ventilators in the simulation box for Optical Wireless Communications. The mechanical turbulences disturb the optical beam that propagates along the central axis of the simulation box. The aim of authors is to show the effect of mechanical turbulence on optical beams at different heights in the simulation box. In the Ansys Fluent, we created numerical models which were then compared with real measurements. Authors compared the real and numerical models according to statistical methods.

  15. Numerical models and experiment of air flow in a simulation box for optical wireless communications

    Science.gov (United States)

    Latal, Jan; Hajek, Lukas; Bojko, Marian; Vitasek, Jan; Koudelka, Petr; Kepak, Stanislav; Vanderka, Ales; Vasinek, Vladimir

    2016-03-01

    In this article, the authors focused on real measurements of mechanical turbulence generated by ventilators in the simulation box for Optical Wireless Communications. The mechanical turbulences disturb the optical beam that propagates along the central axis of the simulation box. The aim of authors is to show the effect of mechanical turbulence on optical beams at different heights in the simulation box. In the Ansys Fluent, we created numerical models which were then compared with real measurements. Authors compared the real and numerical models according to statistical methods.

  16. Decision boxes for clinicians to support evidence-based practice and shared decision making: the user experience

    Directory of Open Access Journals (Sweden)

    Giguere Anik

    2012-08-01

    Full Text Available Abstract Background This project engages patients and physicians in the development of Decision Boxes, short clinical topic summaries covering medical questions that have no single best answer. Decision Boxes aim to prepare the clinician to communicate the risks and benefits of the available options to the patient so they can make an informed decision together. Methods Seven researchers (including four practicing family physicians selected 10 clinical topics relevant to primary care practice through a Delphi survey. We then developed two one-page prototypes on two of these topics: prostate cancer screening with the prostate-specific antigen test, and prenatal screening for trisomy 21 with the serum integrated test. We presented the prototypes to purposeful samples of family physicians distributed in two focus groups, and patients distributed in four focus groups. We used the User Experience Honeycomb to explore barriers and facilitators to the communication design used in Decision Boxes. All discussions were transcribed, and three researchers proceeded to thematic content analysis of the transcriptions. The coding scheme was first developed from the Honeycomb’s seven themes (valuable, usable, credible, useful, desirable, accessible, and findable, and included new themes suggested by the data. Prototypes were modified in light of our findings. Results Three rounds were necessary for a majority of researchers to select 10 clinical topics. Fifteen physicians and 33 patients participated in the focus groups. Following analyses, three sections were added to the Decision Boxes: introduction, patient counseling, and references. The information was spread to two pages to try to make the Decision Boxes less busy and improve users’ first impression. To try to improve credibility, we gave more visibility to the research institutions involved in development. A statement on the boxes’ purpose and a flow chart representing the shared decision

  17. Sand box experiments to evaluate the influence of subsurface temperature probe design on temperature based water flux calculation

    OpenAIRE

    MUNZ, M.; Oswald, S. E.; Schmidt, C.(Research Division and ExtreMe Matter Institute EMMI, GSI Helmholtzzentrum für Schwerionenforschung, Darmstadt, Germany)

    2011-01-01

    Quantification of subsurface water fluxes based on the one dimensional solution to the heat transport equation depends on the accuracy of measured subsurface temperatures. The influence of temperature probe setup on the accuracy of vertical water flux calculation was systematically evaluated in this experimental study. Four temperature probe setups were installed into a sand box experiment to measure temporal highly resolved vertical temperature profiles under controlled water fluxes in the r...

  18. Discrete Element Simulations and Experiments on the Deformation of Cohesive Powders in a bi-axial Box

    OpenAIRE

    Imole, O.I.; Kumar, N; Magnanimo, V.; S. Luding

    2012-01-01

    We compare element test experiments and simulations on the deformation of frictional, cohesive particles in a bi-axial box. We show that computer simulations with the Discrete Element Method qualitatively reproduce a uniaxial compression element test in the true bi-axial tester. We highlight the effects of friction and polydispersity on our simulations and present the second stress response namely the deviatoric stress as a function of the deviatoric strain.

  19. Shaping 3-D boxes

    DEFF Research Database (Denmark)

    Stenholt, Rasmus; Madsen, Claus B.

    2011-01-01

    Enabling users to shape 3-D boxes in immersive virtual environments is a non-trivial problem. In this paper, a new family of techniques for creating rectangular boxes of arbitrary position, orientation, and size is presented and evaluated. These new techniques are based solely on position data......, making them different from typical, existing box shaping techniques. The basis of the proposed techniques is a new algorithm for constructing a full box from just three of its corners. The evaluation of the new techniques compares their precision and completion times in a 9 degree-of-freedom (Do......F) docking experiment against an existing technique, which requires the user to perform the rotation and scaling of the box explicitly. The precision of the users' box construction is evaluated by a novel error metric measuring the difference between two boxes. The results of the experiment strongly indicate...

  20. Sand box experiments to evaluate the influence of subsurface temperature probe design on temperature based water flux calculation

    Directory of Open Access Journals (Sweden)

    M. Munz

    2011-11-01

    Full Text Available Quantification of subsurface water fluxes based on the one dimensional solution to the heat transport equation depends on the accuracy of measured subsurface temperatures. The influence of temperature probe setup on the accuracy of vertical water flux calculation was systematically evaluated in this experimental study. Four temperature probe setups were installed into a sand box experiment to measure temporal highly resolved vertical temperature profiles under controlled water fluxes in the range of ±1.3 m d−1. Pass band filtering provided amplitude differences and phase shifts of the diurnal temperature signal varying with depth depending on water flux. Amplitude ratios of setups directly installed into the saturated sediment significantly varied with sand box hydraulic gradients. Amplitude ratios provided an accurate basis for the analytical calculation of water flow velocities, which matched measured flow velocities. Calculated flow velocities were sensitive to thermal properties of saturated sediment and to temperature sensor spacing, but insensitive to thermal dispersivity equal to solute dispersivity. Amplitude ratios of temperature probe setups indirectly installed into piezometer pipes were influenced by thermal exchange processes within the pipes and significantly varied with water flux direction only. Temperature time lags of small sensor distances of all setups were found to be insensitive to vertical water flux.

  1. Sand box experiments to evaluate the influence of subsurface temperature probe design on temperature based water flux calculation

    Science.gov (United States)

    Munz, M.; Oswald, S. E.; Schmidt, C.

    2011-11-01

    Quantification of subsurface water fluxes based on the one dimensional solution to the heat transport equation depends on the accuracy of measured subsurface temperatures. The influence of temperature probe setup on the accuracy of vertical water flux calculation was systematically evaluated in this experimental study. Four temperature probe setups were installed into a sand box experiment to measure temporal highly resolved vertical temperature profiles under controlled water fluxes in the range of ±1.3 m d-1. Pass band filtering provided amplitude differences and phase shifts of the diurnal temperature signal varying with depth depending on water flux. Amplitude ratios of setups directly installed into the saturated sediment significantly varied with sand box hydraulic gradients. Amplitude ratios provided an accurate basis for the analytical calculation of water flow velocities, which matched measured flow velocities. Calculated flow velocities were sensitive to thermal properties of saturated sediment and to temperature sensor spacing, but insensitive to thermal dispersivity equal to solute dispersivity. Amplitude ratios of temperature probe setups indirectly installed into piezometer pipes were influenced by thermal exchange processes within the pipes and significantly varied with water flux direction only. Temperature time lags of small sensor distances of all setups were found to be insensitive to vertical water flux.

  2. Sand box experiments to evaluate the influence of subsurface temperature probe design on temperature based water flux calculation

    Directory of Open Access Journals (Sweden)

    M. Munz

    2011-06-01

    Full Text Available Quantification of subsurface water fluxes based on the one dimensional solution to the heat transport equation depends on the accuracy of measured subsurface temperatures. The influence of temperature probe setup on the accuracy of vertical water flux calculation was systematically evaluated in this experimental study. Four temperature probe setups were installed into a sand box experiment to measure temporal highly resolved vertical temperature profiles under controlled water fluxes in the range of ±1.3 m d−1. Pass band filtered time series provided amplitude and phase of the diurnal temperature signal varying with depth depending on water flux. Amplitude ratios of setups directly installed into the saturated sediment significantly varied with sand box hydraulic gradients. Amplitude ratios provided an accurate basis for the analytical calculation of water flow velocities, which matched measured flow velocities. Calculated flow velocities were sensitive to thermal properties of saturated sediment and to probe distance, but insensitive to thermal dispersivity equal to solute dispersivity. Amplitude ratios of temperature probe setups indirectly installed into piezometer pipes were influenced by thermal exchange processes within the pipes and significantly varied with water flux direction only. Temperature time lags of small probe distances of all setups were found to be insensitive to vertical water flux.

  3. Station report on the Goddard Space Flight Center (GSFC) 1.2 meter telescope facility

    Science.gov (United States)

    Mcgarry, Jan F.; Zagwodzki, Thomas W.; Abbott, Arnold; Degnan, John J.; Cheek, Jack W.; Chabot, Richard S.; Grolemund, David A.; Fitzgerald, Jim D.

    1993-01-01

    The 1.2 meter telescope system was built for the Goddard Space Flight Center (GSFC) in 1973-74 by the Kollmorgen Corporation as a highly accurate tracking telescope. The telescope is an azimuth-elevation mounted six mirror Coude system. The facility has been used for a wide range of experimentation including helioseismology, two color refractometry, lunar laser ranging, satellite laser ranging, visual tracking of rocket launches, and most recently satellite and aircraft streak camera work. The telescope is a multi-user facility housed in a two story dome with the telescope located on the second floor above the experimenter's area. Up to six experiments can be accommodated at a given time, with actual use of the telescope being determined by the location of the final Coude mirror. The telescope facility is currently one of the primary test sites for the Crustal Dynamics Network's new UNIX based telescope controller software, and is also the site of the joint Crustal Dynamics Project / Photonics Branch two color research into atmospheric refraction.

  4. Influence of core box vents distribution on flow dynamics of core shooting process based on experiment and numerical simulation

    OpenAIRE

    Chang-jiang Ni; Gao-chun Lu; Qing-dong Zhang

    2016-01-01

    Core shooting process plays a decisive role in the quality of sand cores, and core box vents distribution is one of the most important factor determining the effectiveness of core shooting process. In this paper, the influence of core box vents distribution on the flow dynamics of core shooting process was investigated based on in situ experimental observations with transparent core box, high-speed camera and pressure measuring system. Attention was focused on the variation of both the flow b...

  5. Quantum Dots in a Polymer Composite: A Convenient Particle-in-a-Box Laboratory Experiment

    Science.gov (United States)

    Rice, Charles V.; Giffin, Guinevere A.

    2008-01-01

    Semiconductor quantum dots are at the forefront of materials science chemistry with applications in biological imaging and photovoltaic technologies. We have developed a simple laboratory experiment to measure the quantum-dot size from fluorescence spectra. A major roadblock of quantum-dot based exercises is the particle synthesis and handling;…

  6. Bento Boxes

    Science.gov (United States)

    Hasio, Cindy

    2010-01-01

    Bento boxes are common objects in Japanese culture, designed to hold enough lunch for one person. They have individual compartments and sometimes multiple tiers for rice, vegetables, and other side dishes. They are made of materials ranging from wood, cloth, aluminum, or plastic. In general, the greater the number of foods, the better the box is…

  7. Virtual box

    DEFF Research Database (Denmark)

    Stougaard, Malthe Kirkhoff

    2007-01-01

    Mediated intimacy is the phenomenon where humans use technologies to express, share, or communicate intimate feelings with each other. Typically, technologies supporting mediated intimacy encompass different characteristics than technologies designed to solve specific work-oriented tasks. This pa......Mediated intimacy is the phenomenon where humans use technologies to express, share, or communicate intimate feelings with each other. Typically, technologies supporting mediated intimacy encompass different characteristics than technologies designed to solve specific work-oriented tasks....... This paper reports on the design, implementation and initial evaluation of Virtual Box. Virtual Box attempts to create a physical and engaging context in order to support reciprocal interactions with expressive content. An implemented version of Virtual Box is evaluated in a location-aware environment...

  8. Influence of core box vents distribution on flow dynamics of core shooting process based on experiment and numerical simulation

    Directory of Open Access Journals (Sweden)

    Chang-jiang Ni

    2016-01-01

    Full Text Available Core shooting process plays a decisive role in the quality of sand cores, and core box vents distribution is one of the most important factor determining the effectiveness of core shooting process. In this paper, the influence of core box vents distribution on the flow dynamics of core shooting process was investigated based on in situ experimental observations with transparent core box, high-speed camera and pressure measuring system. Attention was focused on the variation of both the flow behavior of sand and pressure curves due to different vents distribution. Taking both kinetic and frictional stress into account, a kinetic-frictional constitutive model was established to describe the internal momentum transfer in the solid phase. Two-fluid model (TFM simulation was then performed and good agreement was achieved between the experimental and simulated results on both the flow behavior of sand and the pressure curves. It was found that vents distribution has direct effect on the pressure difference of different locations in the core box, which determines the buoyancy force exerting on the sand particles and significantly influences the filling process of core sand.

  9. An ultrahigh Finesse Fabry-Perot superconducting resonator as a photon box for cavity-QED experiments

    CERN Document Server

    Kuhr, S; Guerlin, C; Bernu, J; Hoff, U B; Del'eglise, S; Brune, M; Raimond, J M; Haroche, S; Osnaghi, S; Jacques, E; Bosland, P; Visentin, B; Kuhr, Stefan; Guerlin, Christine; Bernu, Julien; Hoff, Ulrich Busk; Del\\'{e}glise, Samuel; Brune, Michel; Raimond, Jean-Michel; Haroche, Serge; Osnaghi, Stefano

    2006-01-01

    We have built a microwave Fabry-Perot resonator made of diamond-machined copper mirrors coated with superconducting niobium. Its damping time (Tc = 130 ms at 51 GHz and 0.8 K) corresponds to a finesse of 4.6 e9, the highest ever reached for a Fabry-Perot in any frequency range. We have tested this resonator by sending across it two circular Rydberg atoms, the first emitting a photon and the second absorbing it after a delay of 1/10 s. This long storage time photon box opens novel perspectives for quantum information. It can be used to perform sequences of hundreds of gate operations on individual atomic qubits. A set-up with one or two photon boxes can store mesoscopic fields made of hundreds of photons for decoherence and non-locality studies.

  10. Glove box adaptation of a high resolution ICP emission spectrometer and its operating experience for analysis of radioactive samples

    International Nuclear Information System (INIS)

    ICP-AES units are commercially available in market from many well established companies. These units are all compact in design and are not suitable for its glove box adaptation. As per our divisional requirement of ICP-AES to be incorporated in glove box for the purpose of analyzing radioactive material, it was decided to have all electronic and optical components to keep outside radioactive containment and the entire assembly of ICP-torch, r.f. coil, nebulizer, spray chamber, peristaltic pump and drainage system to be placed inside the glove-box. Simultaneously it was essential to maintain the analytical performance of the spectrometer. From its ore to nuclear fuel to reprocessing and disposal, uranium undergoes several different transformations within the nuclear fuel cycle, including concentration, purification, isotope enrichment, metallurgical processing and obtaining precious element i.e. plutonium (Pu). The determination of impurities in uranium/plutonium at various stages of nuclear fuel cycle plays an important role in quality control and achievement of chemical and metallurgical requirements

  11. BLACK BOX MODEL OF EDFA′S AND ITS VERIFICATION IN VIRTUAL EXPERIMENT ENVIRONMENT%EDFA黑盒模型及其虚拟实验验证

    Institute of Scientific and Technical Information of China (English)

    唐晓东; 曾庆济; 徐捷; 金耀辉

    2001-01-01

    首先根据EDFA两能级放大模型推导出黑盒模型;其次,采用虚拟实验方法,分析了黑盒模型在不同条件下计算的精度;最后分别模拟放大系统采用黑盒模型和两能级模型,有八个WDM光信号输入时,放大后的光谱图.结果表明两者十分一致.%In this paper,first,the black box model for an erbium-dopedamplifier was derived from the two-level amplified model.Then adopting the so-called virtual experiment,it is analyzed the computation accuracy of the black box model in verified conditions.Finally,when there were eight WDM optical input signals,using the black box model and two-level model respectively,we simulated the amplified optical spectrum.The results agreed with each other very well.

  12. Shadow boxing

    OpenAIRE

    Pulford, Donald

    2011-01-01

    Shadow Boxing continues my interest in the production/performance of gender on stage. It tells the story of a closeted, gay boxer and the devastation that ensues when he is outed. The central device is the play’s appeal to the audience’s imagined ‘bad faith’ concerning masculinity and the shock when the attendant expectations are subverted or upturned. I expressed the foundation of our enterprise in the New York programme by quoting from Calvin Thomas’s Masculinity, Psychoanalysis, Straight Q...

  13. Complementarity in the Einstein-Bohr photon box

    NARCIS (Netherlands)

    Dieks, D.G.B.J.; Lam, S

    2008-01-01

    The Bohr-Einstein photon box thought experiment is a forerunner of the EPR experiment: a packet of radiation escapes from a box, and the box-plus-radiation state remains entangled. Hence, a measurement on the box makes a difference for the state of the far-away radiation long after its escape. This

  14. The new 2meter RCC Telescope in the Northern CAucasus (3100m) for Modern Astronomical Research

    Science.gov (United States)

    Tarady, V.; Yatskiv, Ya.

    A new 2 meter Ritchey-Chretien-Coude telescope in the Northern Caucasus is expected to be ready for astronomical research in late 1995. The telescope is located on the Terskol peak (near Elbrus) with the altitude of 3100 meter. The low atmospheric water vapour content and the high air transparency in the ultraviolet region allow us to infer that the Terskol peak is one of the best sites in Europe for astronomical ground observation. The mean seeing is about 1 arcsec at the Terskol peak. The main parameters of the optical system are as follows: * equivalent focal length is 16000 mm for the Ritchey-Chretien system and 72000 mm for the Coude system; * diameter of the field free from vignetting is 108' for the Ritchey-Chretien system and 5' for another one; *spot concentration is 80% inside the 0.5" circle. The new telescope will be used in investigating the fundamental problems of the star brightness variability, physics of stars and galaxies, studying the planet and satellite atmosphere dynamics. The precise astrometrical problems can also be solved with this telescope. The telescope will be equiped with the following detectors: -CCD Echelle spectrograph in the Coude focus; - astronomical infrared Fourie spectrometre; -digital panoramic polarimeter; -panoramic spectrophotometer with Fabry-Perot interferometer. This project is realized by the joint efforts of the Main Astronomical Observatory in Kiev (Ukrainian Academy of Sciences) and the International Centre for Astronomical and Medical-Ecological Investigations. Proposals for Scientific observation at the Terskol Observatory are encouraged.

  15. Next-Generation Analysis of Deep Sequencing Data: Bringing Light into the Black Box of SELEX Experiments.

    Science.gov (United States)

    Blank, Michael

    2016-01-01

    In silico analysis of next-generation sequencing data (NGS; also termed deep sequencing) derived from in vitro selection experiments enables the analysis of the SELEX procedure (Systematic Evolution of Ligands by EXponential enrichment) in an unprecedented depth and improves the identification of aptamers. Besides quality control and optimization of starting libraries, advanced screening strategies for difficult targets or early identification of rare but high quality aptamers which are otherwise lost in the in vitro selection experiments become possible. The high information content of sequence data obtained from selection experiments is furthermore useful for subsequent lead optimization.

  16. Refugee education in countries of first asylum: Breaking open the black box of pre-resettlement experiences

    OpenAIRE

    Dryden-Peterson, Sarah Elizabeth

    2015-01-01

    The number of refugees who have fled across international borders due to conflict and persecution is at the highest level in recorded history. The vast majority of these refugees find exile in low-income countries neighboring their countries of origin. The refugee children who are resettled to North America, Europe, and Australia arrive with previous educational experiences in these countries of first asylum. This article examines these pre-resettlement educational experiences of refugee chil...

  17. Analysis of the Fall-1989 two-meter box test bed experiments performed at the Army Pulse Radiation Facility (APRF)

    Science.gov (United States)

    Johnson, J. O.; Drischler, J. D.; Barnes, J. M.

    This report summarizes the results of a benchmark analysis of the Monte Carlo Adjoint Shielding Code System (MASH) against a series of experiments performed at the Army Pulse Radiation Facility (APRF) in Aberdeen Proving Ground, Maryland. The series of experiments was performed in the Fall of 1989 and involved experimentalists from APRF; the Defense Research Establishment Ottawa, Canada (DREO); Bubble Technology Industries, Canada, (BTI); and the Establishment Technique Central de l'Armement, France (ETCA). The 'benchmark' analysis of MASH is designed to determine the capability of MASH to reproduce the measured neutron and gamma ray integral and differential (spectral) data. Results of the 'benchmark' analysis are to be used in the recommendations to the North Atlantic Treaty Organization (NATO) Panel 7 Ad Hoc Group of Shielding Experts for replacing the Vehicle Code System (VCS) with MASH as the reference code of choice for armored vehicle nuclear vulnerability calculations.

  18. Fibre reinforced self-compacting concrete flow simulations in comparison with l-box experiments using carbopol

    DEFF Research Database (Denmark)

    Svec, Oldrich; Skocek, Jan; Olesen, John Forbes;

    An evolution of distribution and orientation of fibres in the fibre reinforced self-compacting concrete during the casting process is an important matter as the final orientation and distribution of fibres can significantly influence mechanical properties of the structural elements. A two......-way coupled model for flow of suspension of rigid solid particles in a non-Newtonian fluid with a free surface has been developed for such a purpose and is shortly presented in this paper. Several experiments using an apparent yield stress fluid, i.e. Carbopol® Ultrez 21 Polymer transparent gel, were...

  19. Box Plots in the Australian Curriculum

    Science.gov (United States)

    Watson, Jane M.

    2012-01-01

    This article compares the definition of "box plot" as used in the "Australian Curriculum: Mathematics" with other definitions used in the education community; describes the difficulties students experience when dealing with box plots; and discusses the elaboration that is necessary to enable teachers to develop the knowledge necessary to use them…

  20. Kinematic analysis and parameter optimized experiment of garlic box putting process%蒜种盒机械投放过程运动学分析与参数优化试验

    Institute of Scientific and Technical Information of China (English)

    耿爱军; 张兆磊; 宋占华; 杨建宁; 李汝莘; 侯加林; 刘世琦

    2016-01-01

    plate and conveying belt to the one with the tilt angle of 16° between garlic box and ground. The result of single-factor experiment showed the test bed could work accurately and reliably, and it could satisfy the requirements of garlic box dropping; the tilt angle of belt and the velocity of test bed had effects on the clearance of adjacent garlic boxes, and the fluctuation range of the clearance of garlic boxes was very small ( running speed of test bed, and the best test combination for garlic box dropping was the angle of tilt conveying belt of 30° and the velocity of test bed of 0.75 km/h, under which the clearance of adjacent garlic boxes was 20.4 mm; the garlic boxes could be well connected as they were subtracted by 10 mm at the 2 ends of the box.%针对种盒式大蒜播种方案,为检验倾斜输送带式蒜种盒投放方式的可行性,设计了预植蒜种的可降解蒜种盒和输送带式种盒投放试验台。对蒜种盒投放过程进行了运动学分析,建立了蒜种盒运动速度、输送带倾角与投放后相邻蒜种盒间隙等相关参数间的数学模型,明确了蒜种盒投放间隙的影响因素及变化规律。通过蒜种盒投放过程的受力分析,确定了蒜种盒触地后不与地面产生滑动的条件和方法。为了验证理论分析结果和大蒜播种方案的可行性,进行了输送带倾角、行驶速度等单因素试验和正交试验,结果显示,输送带倾角为30°、试验台运动速度为0.75 km/h,投放效果较好。输送带倾角对前后蒜种盒投放后的间隙影响显著,通过优化蒜种盒长度两端尺寸,可有效消除投放后蒜种盒衔接间隙,保持播种株距稳定。

  1. Mystery Boxes, X Rays, and Radiology.

    Science.gov (United States)

    Thomson, Norman

    2000-01-01

    Indicates the difficulties of teaching concepts beyond light and color and creating memorable learning experiences. Recommends sequential activities using the mystery box approach to explain how scientists and doctors use photon applications. (YDS)

  2. Does the Well-Being of Individuals with Down Syndrome and Dementia Improve When Using Life Story Books and Rummage Boxes? A Randomized Single Case Series Experiment

    Science.gov (United States)

    Crook, Nicola; Adams, Malcolm; Shorten, Nicola; Langdon, Peter E.

    2016-01-01

    Background: This study investigated whether a personalized life story book and rummage box enhanced well-being and led to changes in behaviour for people with Down syndrome (DS) who have dementia. Materials and Methods: A randomized single case series design was used with five participants who had DS and a diagnosis of dementia. Participants were…

  3. ALUMINUM BOX BUNDLING PRESS

    Directory of Open Access Journals (Sweden)

    Iosif DUMITRESCU

    2015-05-01

    Full Text Available In municipal solid waste, aluminum is the main nonferrous metal, approximately 80- 85% of the total nonferrous metals. The income per ton gained from aluminum recuperation is 20 times higher than from glass, steel boxes or paper recuperation. The object of this paper is the design of a 300 kN press for aluminum box bundling.

  4. The mirror box

    Science.gov (United States)

    Thompson, Gene; Mathieson, Don

    2001-11-01

    The mirror box is an old standby in magic shows and an impressive demonstration of the law of reflection for the physics instructor. The box creates the illusion of an object floating in space by the use of a plane mirror.

  5. 爆破试验下离心压缩机齿轮箱体的结构拓扑优化%Topology OPtimization for the Gear-box of the Centrifugal Compressor on the Condition of Blasting Experiment

    Institute of Scientific and Technical Information of China (English)

    舒兵; 龚宪生; 廉超

    2012-01-01

    为解决爆破试验条件下离心压缩机齿轮箱出现裂纹的问题,运用UG、HyperMesh与Optistruct软件分别对箱体进行三维重建、网格划分与有限元分析,以确定其最大应力与应变及其区域。结果表明,最大应力为1096MPa,不满足要求。为此,以单元密度为设计变量,体积最小为目标函数,最大应变处单元位移不超过0.2mm为约束条件,利用Optistruct软件对其进行拓扑优化,并对优化后的结构重新进行强度校核,最大应力降低为228MPa,低于材料许用强度,符合要求。爆破试验也表明,优化后的样机不再出现上述问题。%In order to solve the problem of cracks for the gear-box of the centrifugal compressor on the condition of blasting experiment, a three-dimensional model of the gear-box was built by UG and HyperMesh softwares. Finite element analysis was performed and the regions with the maximum stress and maximum strain were obtained. The maximum stress of 1 096 MPa was obtained and it couldn't meet the requirements. According to the results of finite element analysis, topology optimization was conducted for the gear-box by OptiStruct software. In the optimization, minimum volume was defined as objective function, the element displacement at the maximum strain location not more than 0.2 mm was used as the constraint function and the element density was adopted as the design variable. The strength of the optimized structure was checked and the maximum stress was reduced to 228 MPa. It was less than the allowable stress of material of the box and satisfied the design requirements. The blasting experiment resuhs verified the success of topology optimization for the gear-box.

  6. The Black Box QGP

    CERN Document Server

    Tawfik, A

    2006-01-01

    According to the extensive ab initio calculations of lattice QCD, the much large energy density available in the heavy-ion collisions at SPS and now at RHIC should be enough to create the quark-gluon plasma (QGP); a new state of matter in form plasma of free quarks and gluons. The new matter discovered at RHIC is a ''nearly perfect'' fluid rather than a plasma. The shear viscosity is too small. We should then ask about the theoretical and phenomenological consequences and why we simply assumed that the deconfined hadronic matter should be an ideal gas. Finally, I will address five questions; about the properties of the new phases at high temperatures and the orders of phase transitions. Before we clarify such questions, the QGP will remain a kind of black box. One sends a signal via new experiments or simulations and gets another one out if it. Then one try to explain what is going on. I will show that some promising ideas already have been suggested long time ago, but it seems that community didn't care. Is ...

  7. Black Box QGP

    CERN Document Server

    Tawfik, A

    2006-01-01

    According to extensive ab initio calculations of lattice QCD, the very large energy density available in heavy-ion collisions at SPS and now at RHIC must be sufficient to generate quark-gluon plasma (QGP), a new state of matter in the form of plasma of free quarks and gluons. The new state of matter discovered at RHIC seems to be perfect fluid rather than free plasma. Its shear viscosity is assumed to be almost zero. In this work, I first considered the theoretical and phenomenological consequences of this discovery and finally asked questions about the nature of phase transition and properties of matter. It is important to answer these questions, otherwise QGP will remain a kind of black box; one sends a signal via new experiments or simulations or models and gets another one from it. I will show that some promising ideas have already been suggested a long time ago. I will also suggest a new phase diagram with separated deconfinement and freeze-out boundaries and a mixed state of thermal quark matter and bub...

  8. Changes in position and quality of preferred nest box: effects on nest box use by laying hens

    DEFF Research Database (Denmark)

    Riber, Anja Brinch; Nielsen, Birte L.

    2013-01-01

    Using laying hens, we investigated whether position of a nest box, both within the pen and relative to other nest boxes, influenced the preference for a nest box, and how a sudden and marked change to the preferred box influenced the use of nest boxes by the hens. Groups (n=12) of 15 Isa Warren...... hens were housed in pens, each with five identical nest boxes in different positions: Two single (in a corner or not) and a triplet of nest boxes (one of which in a corner). The use of nest boxes was determined by the number of eggs laid daily in each box. Three experiments, each lasting 10 days, were...... carried out. First, the undisturbed use of each of the nest box types was investigated, and a strong preference (P<0.001) was found for single nest boxes in a corner, with 62% of the nest box eggs laid there. Second, each of the hen groups was moved to another pen allocated at random, and where the...

  9. Cable Tester Box

    Science.gov (United States)

    Lee, Jason H.

    2011-01-01

    Cables are very important electrical devices that carry power and signals across multiple instruments. Any fault in a cable can easily result in a catastrophic outcome. Therefore, verifying that all cables are built to spec is a very important part of Electrical Integration Procedures. Currently, there are two methods used in lab for verifying cable connectivity. (1) Using a Break-Out Box and an ohmmeter this method is time-consuming but effective for custom cables and (2) Commercial Automated Cable Tester Boxes this method is fast, but to test custom cables often requires pre-programmed configuration files, and cables used on spacecraft are often uniquely designed for specific purposes. The idea is to develop a semi-automatic continuity tester that reduces human effort in cable testing, speeds up the electrical integration process, and ensures system safety. The JPL-Cable Tester Box is developed to check every single possible electrical connection in a cable in parallel. This system indicates connectivity through LED (light emitting diode) circuits. Users can choose to test any pin/shell (test node) with a single push of a button, and any other nodes that are shorted to the test node, even if they are in the same connector, will light up with the test node. The JPL-Cable Tester Boxes offers the following advantages: 1. Easy to use: The architecture is simple enough that it only takes 5 minutes for anyone to learn how operate the Cable Tester Box. No pre-programming and calibration are required, since this box only checks continuity. 2. Fast: The cable tester box checks all the possible electrical connections in parallel at a push of a button. If a cable normally takes half an hour to test, using the Cable Tester Box will improve the speed to as little as 60 seconds to complete. 3. Versatile: Multiple cable tester boxes can be used together. As long as all the boxes share the same electrical potential, any number of connectors can be tested together.

  10. Positive impact of the new 5-layer soil-hydrology scheme on seasonal prediction skill of 2-meter air temperatures over Europe

    Science.gov (United States)

    Bunzel, Felix; Müller, Wolfgang; Stacke, Tobias; Hagemann, Stefan; Dobrynin, Mikhail; Baehr, Johanna; Fröhlich, Kristina

    2016-04-01

    Recent studies show that the initialization of soil moisture has the potential to improve the skill of seasonal predictions with coupled climate models. Particularly, soil-moisture memory in the root zone is found to affect the predictability of surface state variables. However, in order to simulate the connection between root-zone soil-moisture and the near-surface atmospheric state realistically, the soil-hydrology scheme implemented in a coupled climate model requires a certain level of complexity. In this study, we first compare the quality of soil-moisture simulation in full-field assimilation experiments performed with the Max Planck Institute Earth System Model (MPI-ESM) in two different setups, one using the old bucket-type soil scheme and one using the new 5-layer soil-hydrology scheme. We find soil moisture to be more realistically simulated when MPI-ESM is used with the new 5-layer soil scheme. In a second step, from each of the two assimilation experiments a set of seasonal hindcast simulations is started. Each hindcast set consists of 10-member ensembles initialized on 1 May and 1 November each year within 1981-2012 with a hindcast length of 6 months each. We find the new 5-layer soil-hydrology scheme to improve the hindcast skill of both summer and winter 2-meter air temperatures over Europe compared to the old bucket-type soil scheme. In order to find possible sources for the improvement, land-atmosphere coupling is analyzed in the two hindcast sets, and a potential link to the atmospheric blocking frequency is investigated.

  11. The BOXES Methodology Black Box Dynamic Control

    CERN Document Server

    Russell, David W

    2012-01-01

    Robust control mechanisms customarily require knowledge of the system’s describing equations which may be of the high order differential type.  In order to produce these equations, mathematical models can often be derived and correlated with measured dynamic behavior.  There are two flaws in this approach one is the level of inexactness introduced by linearizations and the other when no model is apparent.  Several years ago a new genre of control systems came to light that are much less dependent on differential models such as fuzzy logic and genetic algorithms. Both of these soft computing solutions require quite considerable a priori system knowledge to create a control scheme and sometimes complicated training program before they can be implemented in a real world dynamic system. Michie and Chambers’ BOXES methodology created a black box system that was designed to control a mechanically unstable system with very little a priori system knowledge, linearization or approximation.  All the method need...

  12. Depth in box spaces.

    Science.gov (United States)

    Pont, Sylvia C; Nefs, Harold T; van Doorn, Andrea J; Wijntjes, Maarten W A; Te Pas, Susan F; de Ridder, Huib; Koenderink, Jan J

    2012-01-01

    Human observers adjust the frontal view of a wireframe box on a computer screen so as to look equally deep and wide, so that in the intended setting the box looks like a cube. Perspective cues are limited to the size-distance effect, since all angles are fixed. Both the size on the screen, and the viewing distance from the observer to the screen were varied. All observers prefer a template view of a cube over a veridical rendering, independent of picture size and viewing distance. If the rendering shows greater or lesser foreshortening than the template, the box appears like a long corridor or a shallow slab, that is, like a 'deformed' cube. Thus observers ignore 'veridicality'. This does not fit an 'inverse optics' model. We discuss a model of 'vision as optical user interface'.

  13. Cash Flow Prediction Using a Grey-Box Model

    OpenAIRE

    Pang, Yang; Opong, Kwaku; Moutinho, Luia; Li, Yun

    2015-01-01

    This paper tackles the problem of financial forecasting by extending methods developed in automation, engineering and computing science. Current methods existing in the literature for firm-level cash flows are first analysed. Then a grey-box modelling method is developed to elevate the performance of cash-flow prediction. Linear panel data modelling is used as a benchmark model. Experiments with out-of-sample tests are used to validate the grey-box approach. Encouragingly, nonlinear grey-box ...

  14. Opto-Box

    CERN Document Server

    Bertsche, David; The ATLAS collaboration; Welch, Steven; Smith, Dale Shane; Che, Siinn; Gan, K.K.; Boyd, George Russell Jr

    2015-01-01

    The opto-box is a custom mini-crate for housing optical modules, which process and transfer optoelectronic data. The system tightly integrates electrical, mechanical, and thermal functionality into a small package of size 35x10x8 cm^3. Special attention was given to ensure proper shielding, grounding, cooling, high reliability, and environmental tolerance. The custom modules, which incorporate Application Specific Integrated Circuits (ASICs), were developed through a cycle of rigorous testing and redesign. In total, fourteen opto-boxes have been installed and loaded with modules on the ATLAS detector. They are currently in operation as part of the LHC run 2 data read-out chain.

  15. 77 FR 16949 - Pacific Cod by Catcher Vessels Greater Than or Equal to 50 Feet (15.2 Meters) Length Overall...

    Science.gov (United States)

    2012-03-23

    ... (77 FR 15194, March 14, 2012). In accordance with Sec. 679.20(d)(1)(i), the Administrator, Alaska... Vessels Greater Than or Equal to 50 Feet (15.2 Meters) Length Overall Using Hook-and-Line Gear in the... prohibiting directed fishing for Pacific cod by catcher vessels (CVs) greater than or equal to 50 feet...

  16. Hydrophobic, Porous Battery Boxes

    Science.gov (United States)

    Bragg, Bobby J.; Casey, John E., Jr.

    1995-01-01

    Boxes made of porous, hydrophobic polymers developed to contain aqueous potassium hydroxide electrolyte solutions of zinc/air batteries while allowing air to diffuse in as needed for operation. Used on other types of batteries for in-cabin use in which electrolytes aqueous and from which gases generated during operation must be vented without allowing electrolytes to leak out.

  17. Cereal Box Totems.

    Science.gov (United States)

    Jones, AnnMarie

    2002-01-01

    Presents a multicultural project used with fourth-grade students in which they created a three-dimensional totem pole using leftover cereal boxes. Discusses in detail how to create the totem pole. Explains that students learned about Northwest American Indians in class. (CMK)

  18. 桥面铺装与小箱梁的共同作用试验%Experiment of Coaction of Bridge Deck Pavement and Small Box Girder

    Institute of Scientific and Technical Information of China (English)

    钱寅泉; 周正茂; 袁桂芳; 王素娟

    2012-01-01

    Load tests on a single small box girder and a bridge were carried out to evaluate the effects of deck pavement by comparing the deflections of the girders before and after the pavement surfaced. The comprehensive elastic modulus was obtained from the test before pavement surfaced, and the coaction degree of the bridge deck pavement and the girders was obtained by comparing the flexural inertia moment corresponding to the deflection in the test after pavement surfaced with the theoretical flexural inertia moment corresponding to the supposed thickness of the pavement in work. The results from these tests show that (1) the rough interface could greatly improve the coaction degree of bridge deck pavement with girders, which could reach 100% ; (2) in general cases, the extent of the coaction of bridge deck pavement with girders could reach 70% , and for a pavement with thickness of 8 cm, the thickness of the pavement in coaction could be taken as 60% or 3 cm in thickness could be substracted from the pavement in design; (3 ) the pavement could improve the uniformity of the transverse load distribution. Load tests on a single small box girder and a bridge were carried out to evaluate the effects of deck pavement by comparing the deflections of the girders before and after the pavement surfaced. The comprehensive elastic modulus was obtained from the test before pavement surfaced, and the coaction degree of the bridge deck pavement and the girders was obtained by comparing the flexural inertia moment corresponding to the deflection in the test after pavement surfaced with the theoretical flexural inertia moment corresponding to the supposed thickness of the pavement in work. The results from these tests show that (1) the rough interface could greatly improve the coaction degree of bridge deck pavement with girders, which could reach 100% ; (2) in general cases, the extent of the coaction of bridge deck pavement with girders could reach 70% , and for a pavement with

  19. Getting started with Oracle VM VirtualBox

    CERN Document Server

    Dash, Pradyumna

    2013-01-01

    A step-by-step guide that will show you how to install, configure, and manage VirtualBox.This book is for system administrators, technical architects, and virtualization enthusiasts who want to learn how to set up a virtual machine. Knowledge of the Linux environment is expected. Prior experience with VirtualBox or knowledge of virtualization is not required.

  20. Opto-Box

    CERN Document Server

    Bertsche, David; The ATLAS collaboration

    2015-01-01

    The opto-box is a custom mini-crate for housing optical modules, which process and transfer optoelectronic data. Many novel solutions were developed for the custom design and manufacturing. The system tightly integrates electrical, mechanical, and thermal functionality into a small package of size 35x10x8 cm$^{3}$. Special attention was given to ensure proper shielding, grounding, cooling, high reliability, and environmental tolerance. The custom modules, which incorporate Application Specific Integrated Circuits (ASICs), were developed through a cycle of rigorous testing and redesign. In total, fourteen opto-boxes have been installed and loaded with modules on the ATLAS detector. They are currently in operation as part of the LHC run 2 data read-out chain.

  1. Bending analysis of laminated composite box beams

    Energy Technology Data Exchange (ETDEWEB)

    Tripathy, A.K.; Patel, H.J.; Pang, S.S. (Louisiana State Univ., Baton Rouge, LA (United States). Dept. of Mechanical Engineering)

    1994-01-01

    Box beams are widely used in weight reduction structures such as aircraft wings. The use of composite box beams further reduces the weight factor for such structures with the same deflection and stress as that of isotropic box beams. The difference in the behavior of composite box beam with different fiber orientation, number of plies, and number of stringers also provides a wide range of designing parameters to achieve the required performance for a given problem. A bending analysis has been carried out for the study of deflections and stresses for box beams of different material (isotropic and laminated composites), size, and number of stringers subjected to different kinds of loading conditions. A finite element model has been developed based on the strain energy principle, and the results are compared with an available commercial code COSMOS/M.'' Experiments using aluminum and scotchply composite laminates were conducted to verify the results. An optimal design for size and number of stiffeners for a given loading condition has been achieved. Investigations have also been carried out to find the effect of transverse shear on the span-wise normal stress.

  2. The Box Method

    DEFF Research Database (Denmark)

    Nielsen, Peter Vilhelm

    The velocity level in a room ventilated by jet ventilation is strongly influenced by the supply conditions. The momentum flow in the supply jets controls the air movement in the room and, therefore, it is very important that the inlet conditions and the numerical method can generate a satisfactory...... description of this momentum flow. The Box Method is a practical method for the description of an Air Terminal Device which will save grid points and ensure the right level of the momentum flow....

  3. The Electronic Battle Box

    Science.gov (United States)

    Gouin, Denis; Turcotte, Guy; Lebel, Eric; Gilbert, Annie

    2000-08-01

    The Electronic Battle Box is an integrated suite of planning and decision-aid tools specially designed to facilitate Canadian Armed Force Officers during their training and during their tasks of preparing and conducting military operations. It is the result of a collaborative effort between the Defence Research Establishment Valcartier, the Directorate of Army Doctrine (DAD), the Directorate of Land Requirements (DLR), the G4 staff of 1Cdn Div HQ and CGI Information and Management Consultants Inc. Distributed on CD-ROM, the Electronic Battle Box contains efficient and user-friendly tools that significantly reduce the planning time for military operations and ensure staff officers a better focus on significant tasks. Among the tools are an OrBat Browser and an Equipment Browser allowing to view and edit military organizations, a Task Browser providing facilities to prepare plans using Gantt charts, a Logistic Planner allowing to estimate supply requirements applying complex calculations, and Road, Air and Rail Movement Planners. EBB also provides staff officers with a large set of doctrinal documents in an electronic format. This paper provides an overview of the various tools of the Electronic Battle Box.

  4. Field trial experiment over 1200 km on a 100GHz grid-aligned multi-channel black-box wavelength converter

    OpenAIRE

    Rancaño, V.J.F.; Parmigiani, F.; Petropoulos, P.; Richardson, D. J.

    2013-01-01

    A flexible modulation-, bit rate- independent and polarization insensitive wavelength converter based on a highly nonlinear fiber is demonstrated in the middle-point of a field trial transmission experiment.

  5. Projection optics box

    Science.gov (United States)

    Hale, Layton C.; Malsbury, Terry; Hudyma, Russell M.; Parker, John M.

    2000-01-01

    A projection optics box or assembly for use in an optical assembly, such as in an extreme ultraviolet lithography (EUVL) system using 10-14 nm soft x-ray photons. The projection optics box utilizes a plurality of highly reflective optics or mirrors, each mounted on a precision actuator, and which reflects an optical image, such as from a mask, in the EUVL system onto a point of use, such as a target or silicon wafer, the mask, for example, receiving an optical signal from a source assembly, such as a developed from laser system, via a series of highly reflective mirrors of the EUVL system. The plurality of highly reflective optics or mirrors are mounted in a housing assembly comprised of a series of bulkheads having wall members secured together to form a unit construction of maximum rigidity. Due to the precision actuators, the mirrors must be positioned precisely and remotely in tip, tilt, and piston (three degrees of freedom), while also providing exact constraint.

  6. 禽蛋聚氯乙烯弹性薄壁包装盒的设计与力学特性试验%Design of PVC elastic thin wall packing box for eggs and experiment of its mechanical property

    Institute of Scientific and Technical Information of China (English)

    张融; 王树才; 梅志敏

    2016-01-01

    circulation can be reduced by packing. Recently, with the rapid development of information technology and electronic business, and the development of large-scale industrial projects, the brand awareness is gradually strengthened. The total consumption and per capita consumption level of China's packaging eggs are significantly improved. Some large-scale equipments, fragile agricultural products or objects (such as eggs) need lossless transport from the production base to the destination. The way of a quick, long-distance transport is demanded. Both the industrialization and automation package of egg industry and the long-distance non-destructive transport can be implemented by excellent packages, which have important implications for reducing the breakage rate of eggs, improving the packaging efficiency and reducing the labor costs. In this paper, the theoretical study of the mechanical properties of packaging made in the elastic slice was performed, different transport packagings of eggs were designed, and then the experiments for mechanical properties of the packaging with no load and full load were carried out bythe texture analyzer (TMS-PRO, from America). Using the experimental design method, the changes in breakage rate with the variation factors were analyzed, the protective packaging for eggs and the protective effect of egg boxes were detected, and then the product costing and the feasibility of industrial production were analyzed, in order to reduce eggs’ breakage rate of transport, and improve the industrialized automatic production line for the packaging of eggs. The results were presented in the paper: 1) The packaging box of Series C was feasible; 2) The arch structure design of C packaging could support the load of about 90-130 N, and X packaging could support the load of about 80-110 N; 3)The maximal loading capacity of the full box was better than that of the empty box; 4) The capacity of packaging box was significantly enhanced with the increase of eggs

  7. The Classroom Animal: Box Turtles.

    Science.gov (United States)

    Kramer, David C.

    1986-01-01

    Provides basic information on the anatomy, physiology, behaviors, and distribution patterns of the box turtle. Offers suggestions for the turtle's care and maintenance in a classroom environment. (ML)

  8. ACSYS in a box

    CERN Document Server

    Briegel, C; Hendricks, B; King, C; Lackey, S; Neswold, R; Nicklaus, D; Patrick, J; Petrov, A; Rechenmacher, R; Schumann, C; Smedinghoff, J

    2012-01-01

    The Accelerator Control System at Fermilab has evolved to enable this relatively large control system to be encapsulated into a "box" such as a laptop. The goal was to provide a platform isolated from the "online" control system. This platform can be used internally for making major upgrades and modifications without impacting operations. It also provides a standalone environment for research and development including a turnkey control system for collaborators. Over time, the code base running on Scientific Linux has enabled all the salient features of the Fermilab's control system to be captured in an off-the-shelf laptop. The anticipated additional benefits of packaging the system include improved maintenance, reliability, documentation, and future enhancements.

  9. Glove-box filters

    International Nuclear Information System (INIS)

    Description is given of a device for simply and rapidly assembling and dissassembling the filters used inside sealed enclosures, such as glove-boxes and shielded cells equipped with nippers or manipulators, said filters being of the type comprising a cylindrical casing containing a filtering member, the upper portion of said casing being open so as to allow the gases to be cleaned to flow in, whereas the casing bottom is centrally provided with a hole extended outwardly by a threaded collar on which is screwed a connecting-sleeve to be fixed to the mouth of a gas outlet pipe. To a yoke transverse bar is welded a pin which can be likened to a bent spring-blade, one arm of which welded to said transverse bar, is rectilinear whereas its other arm is provided with a boss cooperating with a cavity made in a protrusion of said pipe, right under the mouth thereof

  10. Polymers in Curved Boxes

    CERN Document Server

    Yaman, K; Solis, F J; Witten, T A

    1996-01-01

    We apply results derived in other contexts for the spectrum of the Laplace operator in curved geometries to the study of an ideal polymer chain confined to a spherical annulus in arbitrary space dimension D and conclude that the free energy compared to its value for an uncurved box of the same thickness and volume, is lower when $D < 3$, stays the same when $D = 3$, and is higher when lowers the effective bending elasticity of the walls, and might induce spontaneous symmetry breaking, i.e. bending. (Actually, the above mentioned results show that {\\em {any}} shell in $D = 3$ induces this effect, except for a spherical shell). We compute the contribution of this effect to the bending rigidities in the Helfrich free energy expression.

  11. Two-dimensional box plot

    OpenAIRE

    Phattrawan Tongkumchum

    2005-01-01

    In this paper we propose a two-dimensional box plot, a simple bivariate extension of the box plot and the scatter plot. This plot comprises a pair of trapeziums oriented in the direction of a fitted straight line, with symbols denoting extreme values. The choice for the fitted straight resistant line showing the relationship between the two variables is Tukey’s resistance line. The main components of the plot are an inner box containing 50% of the projection points of the observations on the ...

  12. Computing out of the Box

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Baidu unveils "box computing/’ which it hopes will lead to a number of innovations on the InternetBaidu, China’s most popular search engine, held its Technology Innovation Conference 2009 at the China World

  13. Identifying competencies of boxing coaches

    OpenAIRE

    Ioannis Tasiopoulos; Alexandra Tripolitsiot; Apostolos Stergioula

    2014-01-01

    The purpose of this study was to find out the management skills required by boxing coaches to administrate their clubs. For the purposes of this study a scale was constructed which was answered by 98 boxing coaches. Explanatory factor analysis revealed seven factors: Communication-public relations (5 items), event management (4 items), management techniques (4 items), new technologies (4 items), prevention-safety (2 items), sport (5 items) and sports facilities (2 items). The Cronbach of the ...

  14. Principal investigator in a box: Version 1.2 documentation

    Science.gov (United States)

    Adolph, Jurine; Bhatnagar, Rajiv; Colombano, Silvano P.; Compton, Michael; Frainer, Richard; Groleau, Nicolas; Holden, Kritina; Lai, Sen-Hao; Lam, Chih-Chao; Manahan, Meera

    1990-01-01

    Principal Investigator (PI) in a box is a computer system designed to help optimize the scientific results of experiments that are performed in space. The system will assist the astronaut experimenters in the collection and analysis of experimental data, recognition and pursuit of 'interesting' results, optimal use of the time allocated to the experiment, and troubleshooting of the experiment apparatus. This document discusses the problems that motivate development of 'PI-in-a-box', and presents a high- level system overview and a detailed description of each of the modules that comprise the current version of the system.

  15. Plate forming and break down pizza box

    Science.gov (United States)

    Pantisano, Frank; Devine, Scott M.

    1992-01-01

    A standard corrugated paper pizza box is provided with slit cuts cut through the top panel of the pizza box in a shape to form four circular serving plates with a beveled raised edge and cross slit cuts through the bottom panel of the pizza box separating the box into four essentially equal portions for easy disposal.

  16. ArduiPod Box: a low-cost and open-source Skinner box using an iPod Touch and an Arduino microcontroller.

    Science.gov (United States)

    Pineño, Oskar

    2014-03-01

    This article introduces the ArduiPod Box, an open-source device built using two main components (i.e., an iPod Touch and an Arduino microcontroller), developed as a low-cost alternative to the standard operant conditioning chamber, or "Skinner box." Because of its affordability, the ArduiPod Box provides an opportunity for educational institutions with small budgets seeking to set up animal laboratories for research and instructional purposes. A pilot experiment is also presented, which shows that the ArduiPod Box, in spite of its extraordinary simplicity, can be effectively used to study animal learning and behavior.

  17. First-aid boxes - Reminder

    CERN Multimedia

    GS Department

    2010-01-01

    With a view to ensuring optimum use of the first-aid boxes on the CERN site, we should like to remind you of various changes introduced in March 2009: The TSO of the buildings concerned is responsible for the first-aid boxes, including checking their contents.   First-aid boxes may be restocked ONLY at the CERN stores (SCEM No. 54.99.80). This is no longer possible at the Infirmary. The associated cost is charged to the Departments.   First-aid boxes should be used only for mild injuries. All other cases should be referred to the Medical Service Infirmary (Bldg. 57 – ground-floor, tel. 73802) between 8.00 a.m. and 5.30 p.m. or to the Fire and Rescue Service (tel. 74444). N.B.: This information does not apply to the red emergency first-aid boxes in the underground areas or to the emergency kits for use in the event of being splashed with hydrofluoric acid.

  18. Box graphs and resolutions I

    Directory of Open Access Journals (Sweden)

    Andreas P. Braun

    2016-04-01

    Full Text Available Box graphs succinctly and comprehensively characterize singular fibers of elliptic fibrations in codimension two and three, as well as flop transitions connecting these, in terms of representation theoretic data. We develop a framework that provides a systematic map between a box graph and a crepant algebraic resolution of the singular elliptic fibration, thus allowing an explicit construction of the fibers from a singular Weierstrass or Tate model. The key tool is what we call a fiber face diagram, which shows the relevant information of a (partial toric triangulation and allows the inclusion of more general algebraic blowups. We shown that each such diagram defines a sequence of weighted algebraic blowups, thus providing a realization of the fiber defined by the box graph in terms of an explicit resolution. We show this correspondence explicitly for the case of SU(5 by providing a map between box graphs and fiber faces, and thereby a sequence of algebraic resolutions of the Tate model, which realizes each of the box graphs.

  19. Box graphs and resolutions I

    Science.gov (United States)

    Braun, Andreas P.; Schäfer-Nameki, Sakura

    2016-04-01

    Box graphs succinctly and comprehensively characterize singular fibers of elliptic fibrations in codimension two and three, as well as flop transitions connecting these, in terms of representation theoretic data. We develop a framework that provides a systematic map between a box graph and a crepant algebraic resolution of the singular elliptic fibration, thus allowing an explicit construction of the fibers from a singular Weierstrass or Tate model. The key tool is what we call a fiber face diagram, which shows the relevant information of a (partial) toric triangulation and allows the inclusion of more general algebraic blowups. We shown that each such diagram defines a sequence of weighted algebraic blowups, thus providing a realization of the fiber defined by the box graph in terms of an explicit resolution. We show this correspondence explicitly for the case of SU (5) by providing a map between box graphs and fiber faces, and thereby a sequence of algebraic resolutions of the Tate model, which realizes each of the box graphs.

  20. Identifying competencies of boxing coaches

    Directory of Open Access Journals (Sweden)

    Ioannis Tasiopoulos

    2014-10-01

    Full Text Available The purpose of this study was to find out the management skills required by boxing coaches to administrate their clubs. For the purposes of this study a scale was constructed which was answered by 98 boxing coaches. Explanatory factor analysis revealed seven factors: Communication-public relations (5 items, event management (4 items, management techniques (4 items, new technologies (4 items, prevention-safety (2 items, sport (5 items and sports facilities (2 items. The Cronbach of the scale was 0.85. The five competencies that rated by the coaches were: Supervisors of the area of training, maintaining excellent communication with athletes, using new technologies (e-mail, internet, handling disciplinary matters, accidents, complaints and reports on some sporting games and promoted harmony among athletes. We concluded that boxing coaches understand that the competencies required for meeting their obligations, were related to sports, prevention, safety and communications-public relations.

  1. Dissecting the Hydrobiogeochemical Box

    Science.gov (United States)

    Wang, Y.; Alves Meira Neto, A.; Sengupta, A.; Root, R. A.; Dontsova, K.; Troch, P. A. A.; Chorover, J.

    2015-12-01

    Soil genesis is a coupled hydrologic and biogeochemical process that involves the interaction of weathering rock surfaces and water. Due to strong nonlinear coupling, it is extremely difficult to predict biogeochemical changes from hydrological modeling in natural field systems. A fully controlled and monitored system with known initial conditions could be utilized to isolate variables and simplify these natural processes. To investigate the initial weathering of host rock to soil, we employed a 10° sloping soil lysimeter containing one cubic meter of crushed and homogenized basaltic rock. A major experiment of the Periodic Tracer Hierarchy (PERTH) method (Harman and Kim, 2014) coupled with its bonus experiment were performed in the past two years. These experimental applications successfully described the transit-time distribution (TTD) of a tracer-enriched water breakthrough curve in this unique hydrological system (Harman, 2015). With intensive irrigation and high volume of water storage throughout the experiments, rapid biological changes have been observed on the soil surface, such as algal and grass growth. These observations imply that geochemical hotspots may be established within the soil lysimeter. To understand the detailed 2D spatial distribution of biogeochemical changes, 100 selected and undisturbed soil blocks, among a total 1000 sub-gridded equal sized, are tested with several geochemical tools. Each selected soil block was subjected to elemental analysis by pXRF to determine if elemental migration is detectable in the dynamic proto-soil development. Synchrotron XRD quantification with Reitveld refinement will follow to clarify mineralogical transformations in the soil blocks. The combined techniques aim to confirm the development of geochemical hotspots; and link these findings with previous hydrological findings from the PERTH experiment as well as other hydrological modeling, such as conducted with Hydrus and CATHY. This work provides insight to

  2. A Box Full of Kisses

    Institute of Scientific and Technical Information of China (English)

    崔增印

    2008-01-01

    The story goes that some time ago,a man pun- ished his 3-year-old daughter for wasting a roll of gold wrapping paper.Money was tight and he became infuriated when the child tried to decorate a box to put under the Christmas tree.Nevertheless,the little girl brought the gift to

  3. Reference: AT1BOX [PLACE

    Lifescience Database Archive (English)

    Full Text Available AT1BOX Ueda T, Pichersky E, Malik VS, Cashmore AR The level of expression of the to...mato rbcs-3A gene is modulated by a far-upstream promoter element in a developmentary regulated manner. Plant Cell 1:217-227 (1989) PubMed: 2535544; GenBank: S44160; ...

  4. Back office to box office

    DEFF Research Database (Denmark)

    Haigh, Matthew

    sees a mounting unsecured debt where its members see practical value. Between the two, a steward who may not profit from its office delegates it to back-office agents whose fiduciary management is engendered by box office-sized bonuses. Standard theorisation has foundered. The architecture...

  5. On the Dirichlet's Box Principle

    Science.gov (United States)

    Poon, Kin-Keung; Shiu, Wai-Chee

    2008-01-01

    In this note, we will focus on several applications on the Dirichlet's box principle in Discrete Mathematics lesson and number theory lesson. In addition, the main result is an innovative game on a triangular board developed by the authors. The game has been used in teaching and learning mathematics in Discrete Mathematics and some high schools in…

  6. Stress Analysis of Rectangular Boxes Using Fem

    Directory of Open Access Journals (Sweden)

    D.G. Lokhande

    2014-04-01

    Full Text Available Extensive experimental & theoretical contributions have been made to the study of open box structures, but few references dealing with closed boxes have been found. When a rectangular box structure is subjected to certain pressure, stress analysis of rectangular box is necessary to avoid the failure during working condition. In this work, it is proposed to evaluate the stresses in rectangular box by changing L/B ratios 1, 1.5, 2 for different thicknes of 2.5, 5, 7.5 mm & varying fillet radius, using finite element method.To validate finite element stresses, it is necessary to compare these stresses with analytical approach. From the FE analysis of rectangular box, it is seen that cubical box having the lesser stresses & better for stress distribution due to symmetry.The stiffners further reduces the stresses in boxes

  7. Post-training vasopressin injections may facilitate or delay shuttle-box avoidance extinction

    NARCIS (Netherlands)

    Hagan, J.J.; Bohus, B.; Wied, D. de

    1982-01-01

    After training to avoid footshock in a two-way shuttle box rats were injected with lysine vasopressin (LVP) and returned to the shuttle box 24 hr later for 10 extinction trials. Experiment 1 shows that when injected 30 min after training subsequent extinction responding varied as an inverted “U”-sha

  8. Main: BOX2PVCHS15 [PLACE

    Lifescience Database Archive (English)

    Full Text Available BOX2PVCHS15 S000209 11-May-2006 (last modified) kehi Box 2 of bean (P.v.) chs15 pro...moter; SBF-1 binding site; For a compilation of related GT elements and factors, see Villain et al. (1996); Box 2; chs; chs1

  9. Main: BOX3PVCHS15 [PLACE

    Lifescience Database Archive (English)

    Full Text Available BOX3PVCHS15 S000210 11-May-2006 (last modified) kehi Box 3 of bean (P.v.) chs15 pro...moter; SBF-1 binding site; For a compilation of related GT elements and factors, see Villain et al. (1996); Box 3; chs; chs1

  10. Main: BOX2PSGS2 [PLACE

    Lifescience Database Archive (English)

    Full Text Available BOX2PSGS2 S000204 17-May-1998 (last modified) kehi Box 2 in glutamine synthetase (GS...2) gene in pea (P.s.); Repeated in tandem with a partial palindrome located between the repeats; Located at ca. -300 of pea GS...2; Box 2; glutamine synthetase; GS2; pea (Pisum sativum); TCTAAGCAAAG ...

  11. The Heuristic Interpretation of Box Plots

    Science.gov (United States)

    Lem, Stephanie; Onghena, Patrick; Verschaffel, Lieven; Van Dooren, Wim

    2013-01-01

    Box plots are frequently used, but are often misinterpreted by students. Especially the area of the box in box plots is often misinterpreted as representing number or proportion of observations, while it actually represents their density. In a first study, reaction time evidence was used to test whether heuristic reasoning underlies this…

  12. Illumination box and camera system

    Science.gov (United States)

    Haas, Jeffrey S.; Kelly, Fredrick R.; Bushman, John F.; Wiefel, Michael H.; Jensen, Wayne A.; Klunder, Gregory L.

    2002-01-01

    A hand portable, field-deployable thin-layer chromatography (TLC) unit and a hand portable, battery-operated unit for development, illumination, and data acquisition of the TLC plates contain many miniaturized features that permit a large number of samples to be processed efficiently. The TLC unit includes a solvent tank, a holder for TLC plates, and a variety of tool chambers for storing TLC plates, solvent, and pipettes. After processing in the TLC unit, a TLC plate is positioned in a collapsible illumination box, where the box and a CCD camera are optically aligned for optimal pixel resolution of the CCD images of the TLC plate. The TLC system includes an improved development chamber for chemical development of TLC plates that prevents solvent overflow.

  13. Das k-Box-Produkt

    OpenAIRE

    Elser, Stefan

    2011-01-01

    Ziel dieser Doktorarbeit ist es, bekannte und oft verwendete Eigenschaften des Tychonow-Produkts in analoger Form für das k-Box-Produkt zu beweisen, was bisher noch nicht geschehen ist, und die Verbindung zwischen der Infinitären Kombinatorik und der Topologie zu vertiefen. In der Infinitären Kombinatorik, ein Zweig der modernen Mengenlehre, bedient man sich gerne topologischer Begriffe, um einerseits Ergebnisse zu verdeutlichen und um andererseits den sehr abstrakten kombinatorischen Be...

  14. Main: BOX1PSGS2 [PLACE

    Lifescience Database Archive (English)

    Full Text Available BOX1PSGS2 S000222 19-August-2004 (last modified) kehi Box 1 element in pea (P.s.) glutamine synthetase (GS...2) gene; An element in a 33-bp AT-rich sequence (box 1) of the 5' end of a GS2 promot...er; Located at -837 to -827 of pea GS2; Multimer of box 1 element was used to isolate a cDNA encoding an AT-...rich DNA binding protein (ATBP-1) (Tjaden & Coruzzi, 1994); Box 1; glutamine synthetase; GS2; ATBp; ATBP-1; pea (Pisum sativum) ATAGAAATCAA ...

  15. Experiment Research on Vertical Mechanical Performance of Web Plate of 32 m Simply-surpported Prestressed Concrete Box Girder on Chengdu-Dujiangyan Railway%成灌铁路跨度32 m预应力混凝土简支箱梁腹板竖向受力性能试验研究

    Institute of Scientific and Technical Information of China (English)

    苏永华; 马林

    2014-01-01

    我国客运专线各种标准梁型在实际应用之初均进行了实体箱梁的试验研究工作,以掌握结构的实际受力性能,对于保证箱梁的正常、安全使用起到了重要作用。以新建成灌铁路跨度32m预应力混凝土简支箱梁为研究对象,对梁端变截面处腹板在预施应力条件下的受力状态进行了计算分析和测试,对跨中等截面段腹板在模拟运梁车运梁通过工况下的受力性能进行了计算分析和静载试验。根据箱梁腹板受力性能试验研究结果,对箱梁的截面构造和预应力束布置进行了设计优化、完善,改善了腹板的竖向受力性能,静载试验结果表明在运梁、运营工况下箱梁能满足正常使用要求。%In China, experiment research on a new box girder structure is always carried out at the beginning of its practical application, so as to ascertain the actual mechanical performances of various standard girder types used on passenger dedicated lines; and this practice plays a important role in ensuring normal and safe use of the box girders. This article took the 32m simply-supported prestressed concrete box girder on newly-built Chengdu-Dujiangyan Railway as the research object. And then the calculation analysis and mechanical performance test of the web plate of variable cross-section at the girder end were conducted under the pre-stressing condition. Furthermore, calculation analysis and static load test of the mechanical performance of the web plate of uniform cross-section at the mid-span were also conducted when simulating the girder transporter passing through. Subsequently, according to the results of experiment research of vertical performance of box girder web plate, the box cross-section structure design and the layout design of prestressed steel tendon were optimized and perfected, so that the vertical performance of the web plate was able to be improved. The result of static load test indicates that

  16. Ionization box type radiation detector

    International Nuclear Information System (INIS)

    An ionization box for monitoring radiation rays, a first amplification circuit of a multi-stage amplification circuit employing a MOS type FET as an initial stage amplification device, a second amplification circuit employing a junction type FET as an initial stage amplification device, a first change-over switch for switching ionization current depending on input signals, a second change-over switch for switching output signals, and a signal level discrimination circuit are constituted integrally. When radiation dose rate is low, the ionization current is inputted to the first amplification circuit and outputted as a radiation ray monitor signal and, when the radiation dose rate is increased to higher than a predetermined value, the ionization current is inputted to the second amplification circuit and outputted as a radiation ray monitor signal. That is, monitoring accuracy is high when the ionization current is low since the MOS type FET of high input impedance is used. If the ionization current is higher than a predetermined value, there is no worry that the detection becomes impossible since the junction type FET having less worry of causing characteristic change due to high radiation dose rate is used. Accordingly, ionization box type monitor at a high monitoring reliability can be obtained. (N.H.)

  17. The Lithium Vapor Box Divertor

    Science.gov (United States)

    Goldston, Robert; Hakim, Ammar; Hammett, Gregory; Jaworski, Michael; Myers, Rachel; Schwartz, Jacob

    2015-11-01

    Projections of scrape-off layer width to a demonstration power plant suggest an immense parallel heat flux, of order 12 GW/m2, which will necessitate nearly fully detached operation. Building on earlier work by Nagayama et al. and by Ono et al., we propose to use a series of differentially pumped boxes filled with lithium vapor to isolate the buffering vapor from the main plasma chamber, allowing stable detachment. This powerful differential pumping is only available for condensable vapors, not conventional gases. We demonstrate the properties of such a system through conservation laws for vapor mass and enthalpy, and then include plasma entrainment and ultimately an estimate of radiated power. We find that full detachment should be achievable with little leakage of lithium to the main plasma chamber. We also present progress towards solving the Navier-Stokes equation numerically for the chain of vapor boxes, including self-consistent wall boundary conditions and fully-developed shocks, as well as concepts for an initial experimental demonstration-of-concept. This work supported by DOE Contract No. DE-AC02-09CH11466.

  18. F-box proteins in flowering plants

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In eukaryotes, the ubiquitin-mediated protein degradation pathway has been shown to control several key biological processes such as cell division, development, metabolism and immune response. F-box proteins, as a part of SCF (Skp1-Cullin (or Cdc53)-F-box) complex, functioned by interacting with substrate proteins, leading to their subsequent degradation by the 26S proteasome. To date, several F-box proteins identified in Arabidopsis and Antirrhinum have been shown to play important roles in auxin signal transduction, floral organ formation, flowering and leaf senescence. Arabidopsis genome sequence analysis revealed that it encodes over 1000 predicted F-box proteins accounting for about 5% of total predicted proteins. These results indicate that the ubiquitin-mediated protein degradation involving the F-box proteins is an important mechanism controlling plant gene expression. Here, we review the known F-box proteins and their functionsin flowering plants.

  19. Understanding Recommender Dynamics driving Box Office Revenues

    CERN Document Server

    Yeung, C H; Jin, C -H

    2010-01-01

    We introduce a simple model to investigate the underlying dynamics driving movie box office. Without an explicit reliance on time, the box office of movies evolves naturally by movie-movie competition through reviews listed on a centralized recommender system. A simple mean-field approximation is employed which assumes an average interaction between the competing movies, and describes the interesting box office dynamics. Box office hits are found for movies with quality beyond a critical value, leading to booms in gross box office. Such critical value is dependent on the reviewing behaviors, intention of movie goers for new movies, and the quality of the peer competing movies. Finally we compare our analytical results with simulations and real system and obtain qualitative agreements, suggesting the present model in describing the fundamental dynamics of box office.

  20. Main: BOX1PVCHS15 [PLACE

    Lifescience Database Archive (English)

    Full Text Available BOX1PVCHS15 S000208 11-May-2006 (last modified) kehi Box 1 of bean (P.v.) chs15 pro...moter; one of SBF-1 binding sites in chs15 promoter; Located at -318 to -305; Involved in organ-specific exp...e Villain et al. (1996); Box 1; chs; chs15; CHS; SBF-1; silencer; organ-specific; Gt; GT-1; GT; bean (Phaseolus vulgaris) TAAAAGTTAAAAAC ...

  1. Metod of black box and their us

    OpenAIRE

    Novotný, Martin

    2013-01-01

    This thesis on a topic "black-box method and its use" deals with the description of the method of solving problematic tasks as a black box and its use in teaching. Using the theory of systems and cybernetics disciplines, especially cybernetic-pedagogy attempts to describe this method so that it is as efficient as possible and to maximize the benefits for students. Besides, the implementation of selected black box that will be suitable and used for teaching subjects electrotechnics, automatiza...

  2. Thermohaline circulation stability: a box model study - Part I: uncoupled model

    CERN Document Server

    Lucarini, V; Lucarini, Valerio; Stone, Peter H.

    2004-01-01

    A thorough analysis of the stability of the uncoupled Rooth interhemispheric 3-box model of thermohaline circulation (THC) is presented. The model consists of a northern high latitudes box, a tropical box, and a southern high latitudes box, which respectively correspond to the northern, tropical and southern Atlantic ocean. We adopt restoring boundary conditions for the temperature variables and flux boundary conditions for the salinity variables. We study how the strength of THC changes when the system undergoes forcings that are analogous to those of global warming conditions by applying to the equilibrium state perturbations to the moisture and heat fluxes into the three boxes. In each class of experiments, we determine, using suitably de- fined metrics, the boundary dividing the set of forcing scenarios that lead the system to equilibria characterized by a THC pattern similar to the present one, from those that drive the system to equilibria with a reversed THC. Fast increases in the moisture flux into th...

  3. Interchangeable breech lock for glove boxes

    Energy Technology Data Exchange (ETDEWEB)

    Lemonds, David Preston

    2015-11-24

    A breech lock for a glove box is provided that may be used to transfer one or more items into the glove box. The breech lock can be interchangeably installed in place of a plug, glove, or other device in a port or opening of a glove box. Features are provided to aid the removal of items from the breech lock by a gloved operator. The breech lock can be reused or, if needed, can be replaced with a plug, glove, or other device at the port or opening of the glove box.

  4. Broken links and black boxes

    DEFF Research Database (Denmark)

    Sindbæk, Søren Michael

    2013-01-01

    Long-distance communication has emerged as a particular focus for archaeological exploration using network theory, analysis, and modelling. Initial attempts to adapt methods from social network analysis to archaeological data have, however, struggled to produce decisive results. This paper argues...... that the archaeological study of communication networks in the past calls for radically different analytical methods from those employed by most other forms of social network analysis. The fragmentary archaeological evidence presents researchers with the task of reconstructing the broken links of a ruined network from...... observable distributions and patterns of association in the archaeological record. In formal terms this is not a problem of network analysis, but network synthesis: the classic problem of cracking codes or reconstructing black-box circuits....

  5. Model Equations: "Black Box" Reconstruction

    Science.gov (United States)

    Bezruchko, Boris P.; Smirnov, Dmitry A.

    Black box reconstruction is both the most difficult and the most tempting modelling problem when any prior information about an appropriate model structure is lacking. An intriguing thing is that a model capable of reproducing an observed behaviour or predicting further evolution should be obtained only from an observed time series, i.e. "from nothing" at first sight. Chances for a success are not large. Even more so, a "good" model would become a valuable tool to characterise an object and understand its dynamics. Lack of prior information causes one to utilise universal model structures, e.g. artificial neural networks, radial basis functions and algebraic polynomials are included in the right-hand sides of dynamical model equations. Such models are often multi-dimensional and involve quite many free parameters.

  6. VORONOI DIAGRAMS WITHOUT BOUNDING BOXES

    Directory of Open Access Journals (Sweden)

    E. T. K. Sang

    2015-10-01

    Full Text Available We present a technique for presenting geographic data in Voronoi diagrams without having to specify a bounding box. The method restricts Voronoi cells to points within a user-defined distance of the data points. The mathematical foundation of the approach is presented as well. The cell clipping method is particularly useful for presenting geographic data that is spread in an irregular way over a map, as for example the Dutch dialect data displayed in Figure 2. The automatic generation of reasonable cell boundaries also makes redundant a frequently used solution to this problem that requires data owners to specify region boundaries, as in Goebl (2010 and Nerbonne et al (2011.

  7. Trial manufacture of portable type `WISH BOX`; Kahangata WISH BOX no shisaku kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Ushiyama, I.; Sakuma, H.; Qin, W. [Ashikaga Institute of Technology, Tochigi (Japan); Onai, Y.

    1996-10-27

    This paper proposes the small portable type power source `WISH BOX` (wind and solar hybrid) composed of a small wind power generator and solar cell panels. Since solar radiation and wind power are complementary to each other in seasons, day and night, and fine and cloudy weather, WISH BOX is useful for standalone power source in non-power areas of developing countries, life spot in disasters, and outdoor leisure. The most small light-weight high-performance AIR303 produced by Southwest Windpower Co., USA is used as wind power generator, and two 50W solar cell panels HSC-5010-S produced by Daido Hokusan Co. is used. Sealed lead storage batteries (12V, 20Ah each) are also connected to cope with load fluctuation. In comparison with conventional portable gasoline engine generators, this environment-friendly generator is featured by fuel-free, no emission of gases, no noises and no fire occurrence, and can also supply stable power with small batteries even in the nighttime and cloudy weather by combining wind power. The generator of 400,000 yen is now in field experiment. 2 refs., 5 figs.

  8. Unification of box shapes in molecular simulations

    NARCIS (Netherlands)

    Bekker, H.

    1997-01-01

    In molecular simulations with periodic boundary conditions the computational box may have five different shapes: triclinic; the hexagonal prism; two types of dodecahedrons; and the truncated octahedron. In this article, we show that every molecular simulation, formulated in one of these boxes, can b

  9. Modern biotechnology Panacea or new Pandora's box?

    NARCIS (Netherlands)

    Tramper, J.; Yang Zhu, Yang

    2011-01-01

    According to Greek mythology Pandora was sent down to earth upon the orders of Zeus. She was given a mysterious box which she was not allowed to open. However, Pandora was very curious and when she arrived on earth she couldn?t help taking a peek inside the box. She saw that it was filled with gifts

  10. Cosmetic Foot Surgery: Fashion's Pandora's Box

    Science.gov (United States)

    ... Fashion’s Pandora’s Box? A A A | Print | Share Cosmetic Foot Surgery: Fashion’s Pandora’s Box? Foot and ankle ... extreme and imprudent as it may sound, the cosmetic surgery craze isn't just for faces anymore- ...

  11. An accidental statistician the life and memories of George E. P. Box

    CERN Document Server

    Box, George E P

    2013-01-01

    Celebrating the life of an admired pioneer in statisticsIn this captivating and inspiring memoir, world-renowned statistician George E. P. Box offers a firsthand account of his life and statistical work. Writing in an engaging, charming style, Dr. Box reveals the unlikely events that led him to a career in statistics, beginning with his job as a chemist conducting experiments for the British army during World War II. At this turning point in his life and career, Dr. Box taught himself the statistical methods necessary to analyze his own findings when there were no statist

  12. Optimizing PHB and Protease Production by Box Behnken Design

    Directory of Open Access Journals (Sweden)

    Amro Abd al fattah Amara

    2013-04-01

    Full Text Available Mixed culture is more suitable to adapt more flexible fermentation process and produce different product simultaneously. In this study a mixed Bacillus culture was investigated for their ability to produce the bioplastic "Polyhydroxybutyrate" and both of the mesophilic and the thermophilic proteases in one flask. Box-Behnken experimental design was used. The produced amount of PHB has been increased significantly. Meanwhile there is a competition between PHB and proteases. The maximum produced amount of PHB using Box-Behnken design was 2.82 g/l/48 h with protease activity equal to 41.9 Units/ml/48 h for thermophilic proteases and 99.65 Units/ml/48 h for mesophilic proteases. Excel solver was used for extra-optimization for the optimum conditions obtained from Box-Behnken experiments and its model. The maximum PHB obtained after using Excel solver was 2.88 g/l/48 h. The maximum mesophilic and thermophilic activities obtained at the same PHB production conditions were 175.68 and 243.38 Units/ml respectively. The model accuracy as obtained from Excel solver was 118.8%, which prove the power of the experimental design in optimizing such complicated process. The strategies used in this study are recommended for the production of PHB and different proteases simultaneously using Bacillus mixed culture. ABSTRAK: Kultur campuran adalah lebih sesuai bagi proses penapaian yang fleksibel dan ia boleh menghasilkan produk yang berbeza secara serentak. Dalam kajian ini keupayaan  menghasilkan "Polyhydroxybutyrate" bioplastik serta mesofilik dan termofilik protease dalam satu flask oleh  kultur Bacillus campuran telah disiasat. Eksperimen rekabentuk Box-Behnken telah digunakan. Jumlah PHB yang dikeluarkan meningkat dengan ketara dan terdapat persaingan antara PHB dan protease. Jumlah keluaran PHB maksima menggunakan rekabentuk Box-Behnken adalah 2.82 g/l/48 jam dengan aktiviti protease sama dengan 41.9 Unit/ml/48 jam untuk protease termofilik dan 99.65 Unit

  13. Principal Investigator-in-a-Box

    Science.gov (United States)

    Young, Laurence R.

    1999-01-01

    Human performance in orbit is currently limited by several factors beyond the intrinsic awkwardness of motor control in weightlessness. Cognitive functioning can be affected by such factors as cumulative sleep loss, stress and the psychological effects of long-duration small-group isolation. When an astronaut operates a scientific experiment, the performance decrement associated with such factors can lead to lost or poor quality data and even the total loss of a scientific objective, at great cost to the sponsors and to the dismay of the Principal Investigator. In long-duration flights, as anticipated on the International Space Station and on any planetary exploration, the experimental model is further complicated by long delays between training and experiment, and the large number of experiments each crew member must perform. Although no documented studies have been published on the subject, astronauts report that an unusually large number of simple errors are made in space. Whether a result of the effects of microgravity, accumulated fatigue, stress or other factors, this pattern of increased error supports the need for a computerized decision-making aid for astronauts performing experiments. Artificial intelligence and expert systems might serve as powerful tools for assisting experiments in space. Those conducting space experiments typically need assistance exactly when the planned checklist does not apply. Expert systems, which use bits of human knowledge and human methods to respond appropriately to unusual situations, have a flexibility that is highly desirable in circumstances where an invariably predictable course of action/response does not exist. Frequently the human expert on the ground is unavailable, lacking the latest information, or not consulted by the astronaut conducting the experiment. In response to these issues, we have developed "Principal Investigator-in-a-Box," or [PI], to capture the reasoning process of the real expert, the Principal

  14. NC INCREMENTAL SHEET METAL FORMING PROCESS AND VERTICAL WALL SQUARE BOX FORMING

    Institute of Scientific and Technical Information of China (English)

    Zhou Liuru; Mo Jianhua; Xiao Xiangzhi

    2004-01-01

    The forming principle and deformation analysis of NC incremental sheet metal forming process as well as the process planning, experiment and key process parameters of vertical wall square box forming are presented. Because the deformation of sheet metal only occurs around the tool head and the deformed region is subjected to stretch deformation, the deformed region of sheet metal thins, and surface area increases. Sheet metal forming stepwise is to lead to the whole sheet metal deformation. The forming half-apex angle θ and corner radius R are the main process parameters in NC incremental forming of vertical wall square box. According to sine law, a vertical wall square box can't be formed by NC incremental sheet metal forming process in a single process, rather, it must be formed in multi processes. Thus, the parallel line type tool path process method is presented to form the vertical wall square box, and the experiment and analysis are made to verify it.

  15. A RESEARCH ON HEALTHY LIVING BEHAVIORS OF ARCHERY COACHES AND BOXING COACHES

    Directory of Open Access Journals (Sweden)

    Ziya Bahadır

    2014-07-01

    Full Text Available The aim of the research was to assess healthy living behaviors of archery coaches and boxing coaches in terms of sportive branch, sportive experience and gender. The study was conducted with boxing coaches (n=119 and archery coaches (n=131. As the data collection tool; “ The Health - Promoting Lifestyle Profile II (HPLP - II which was developed by Walker et al . and validity and reliability tests of which were performed by Bahar et al . (2008 was employed. In the study; it was found out that mean score of boxing coaches on P hysical activity subscale was higher than archery coaches . Besides; no statistically significant difference s existed between archery coaches and boxing coaches in terms of gender and sportive experience.

  16. Vibration Control on Roadheader with Horizontal Cutting Head of Electric- Control - Box

    Institute of Scientific and Technical Information of China (English)

    AN Wei; LU Xin; WEI Ren-zhi; WU Miao; HUANG Min

    2003-01-01

    Analysis and measurements of the vibration on AM50 horizontal axis roadheader of electric-control-box was carried out, and the vibration characteristics were obtained. Based on the results, a new type of wire rope isolator was designed, whose characteristics were examined by experiments. The tests show that the wire rope isolator achieves satisfied results and can meet the requirements for the vibration control of the roadheader of electric-control-box.

  17. Examination of a Junction-Box Adhesion Test for Use in Photovoltaic Module Qualification: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Miller, D. C.; Wohlgemuth, J. H.

    2012-08-01

    Engineering robust adhesion of the junction-box (j-box) is a hurdle typically encountered by photovoltaic (PV) module manufacturers during product development. There are historical incidences of adverse effects (e.g., fires) caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp heat' IEC qualification test is proposed to verify the basic robustness of its adhesion system. The details of the proposed test will be described, in addition to the preliminary results obtained using representative materials and components. The described discovery experiments examine moisture-cured silicone, foam tape, and hot-melt adhesives used in conjunction with PET or glass module 'substrates.' To be able to interpret the results, a set of material-level characterizations was performed, including thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. PV j-boxes were adhered to a substrate, loaded with a prescribed weight, and then placed inside an environmental chamber (at 85C, 85% relative humidity). Some systems did not remain attached through the discovery experiments. Observed failure modes include delamination (at the j-box/adhesive or adhesive/substrate interface) and phase change/creep. The results are discussed in the context of the application requirements, in addition to the plan for the formal experiment supporting the proposed modification to the qualification test.

  18. Examination of a Junction-Box Adhesion Test for Use in Photovoltaic Module Qualification (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Miller, D. C.; Wohlgemuth, J. H.

    2012-08-01

    Engineering robust adhesion of the junction-box (j-box) is a hurdle typically encountered by photovoltaic (PV) module manufacturers during product development. There are historical incidences of adverse effects (e.g., fires) caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp heat' IEC qualification test is proposed to verify the basic robustness of its adhesion system. The details of the proposed test will be described, in addition to the preliminary results obtained using representative materials and components. The described discovery experiments examine moisture-cured silicone, foam tape, and hot-melt adhesives used in conjunction with PET or glass module 'substrates.' To be able to interpret the results, a set of material-level characterizations was performed, including thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. PV j-boxes were adhered to a substrate, loaded with a prescribed weight, and then placed inside an environmental chamber (at 85C, 85% relative humidity). Some systems did not remain attached through the discovery experiments. Observed failure modes include delamination (at the j-box/adhesive or adhesive/substrate interface) and phase change/creep. The results are discussed in the context of the application requirements, in addition to the plan for the formal experiment supporting the proposed modification to the qualification test.

  19. MADS-box gene evolution - structure and transcription patterns

    DEFF Research Database (Denmark)

    Johansen, Bo; Pedersen, Louise Buchholt; Skipper, Martin;

    2002-01-01

    Mads-box genes, ABC model, Evolution, Phylogeny, Transcription patterns, Gene structure, Conserved motifs......Mads-box genes, ABC model, Evolution, Phylogeny, Transcription patterns, Gene structure, Conserved motifs...

  20. LA VIGA HUECA HABITABLE Y OTRAS EXPERIENCIAS DE PREFABRICACIÓN EN VIVIENDA DE GO–DB / The habitable box beam and other housing prefabrication experiences in GO-DB

    Directory of Open Access Journals (Sweden)

    Francisco Javier Cortina Maruenda

    2012-05-01

    Full Text Available RESUMEN En los albores de la industria aplicada a la arquitectura en España, el estudio GO-DB Arquitectos Asociados, realizó 8 viviendas experimentales (1967-1969 como cierre a una primera etapa de investigación propia. Inspiradas en las dovelas de los puentes de hormigón prefabricado, haciendo suya la idea de Le Corbusier de que los ingenieros construyen en su tiempo, realizaron una serie de ensayos que concluyó con las 8 viviendas que protagonizan este artículo. Con un presupuesto muy ajustado consiguieron realizar una pequeña factoría "in situ" para por medio de una cadena de montaje, producir los Elementos Modulares que bajo el concepto de la Viga Hueca Habitable conformarían cada una de las viviendas. Cada cinco horas se podía montar una vivienda de diez módulos, casi como aparcar coches o hacer una construcción con los bloques de madera de arce de Froebel a los que Wright fue tan aficionado. Este artículo, explicará además, basándose en las publicaciones y escritos del propio estudio, cual fue el proceso y las ideas teóricas que sustentaron este proyecto que abonó el campo para posteriores investigaciones en prefabricación. SUMMARY At the dawn of the industry applied to architecture in Spain, the studio of GO-DB Associated Architects constructed eight experimental dwellings (1967-1969 as the finalization of a first stage of their research. Inspired by the sections of precast concrete bridges, adopting the idea of Le Corbusier that engineers built in his era, the studio completed a series of trials that ended with the eight dwellings featured in this article.With a very tight budget they made a small "in-situ" factory which, by means of an assembly line, produced the Modular Elements that, under the concept of The Habitable Box Beam, made up each of the homes. A dwelling of ten modules could be assembled every five hours, almost like parking cars or making a construction with the Froebel maple blocks so beloved by Wright

  1. Characteristics of wind power on Savonius rotor using a guide-box tunnel

    Energy Technology Data Exchange (ETDEWEB)

    Irabu, Kunio; Roy, Jitendro Nath [Faculty of Mechanical Engineering, University of the Ryukyus, Senbaru-1, Nishihara, Okinawa 903-0213 (Japan)

    2007-11-15

    This study investigates to improve and adjust the output power of Savonius rotor under various wind power and suggests the method of prevention the rotor from strong wind disaster. In this study, as the appropriate device to achieve the purpose of it, a guide-box tunnel is employed. The guide-box tunnel is like a rectangular box as wind passage in which a test rotor is included. The area ratio between the inlet and exit of it is variable to adjust the inlet mass flow rate or input power. At first, the experiment was conducted to find the adequate configuration which would provide the best relative performance. The present experiment, however, does not include the test to retain the guide-box tunnel from the strong wind. The experiments include the static torque test of the fixed rotor at any phase angle and the dynamic torque test at rotation of them. Consequently, it was found that the maximum rotor rotational speed was achieved in the range of the guide-box area ratio between 0.3 and 0.7 and the value of the output power coefficient of the rotor with guide-box tunnel of the area ratio 0.43 increases about 1.5 times with three blades and 1.23 times with two blades greater than that without guide-box tunnel, respectively. It seemed that the performance of Savonius rotor within the guide-box tunnel is comparable enough with other methods for augmentation and control of the output. (author)

  2. Packing a cake into a box

    KAUST Repository

    Skopenkov, Mikhail

    2011-05-01

    Given a triangular cake and a box in the shape of its mirror image, how can the cake be cut into a minimal number of pieces so that it can be put into the box? The cake has icing, so we are not allowed to put it into the box upside down. V. G. Boltyansky asked this question in 1977 and showed that three pieces always suffice. In this paper we provide examples of cakes that cannot be cut into two pieces to be put into the box. This shows that three is the answer to Boltyansky\\'s question. We also give examples of cakes which can be cut into two pieces. © THE MATHEMATICAL ASSOCIATION OF AMERICA.

  3. Packing a cake into a box

    CERN Document Server

    Skopenkov, Mikhail

    2010-01-01

    Given a cake in form of a triangle and a box that fits the mirror image of the cake, how to cut the cake into a minimal number of pieces so that it can be put into the box? The cake has an icing, so that we are not allowed to put it into the box upside down. V.G. Boltyansky asked this question in 1977 and showed that three pieces always suffice. In this paper we provide examples of cakes that cannot be cut into two pieces to put into the box. This shows that three is the answer to V.G. Boltyansky's question. Also we give examples of cakes which can be cut into two pieces.

  4. Starling nest box monitoring [Rocky Mountain Arsenal

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document described the standard operating procedures for observing and recording data collected from starling nest box monitoring at the Rocky Mountain...

  5. Black-Box Search by Unbiased Variation

    DEFF Research Database (Denmark)

    Lehre, Per Kristian; Witt, Carsten

    2012-01-01

    The complexity theory for black-box algorithms, introduced by Droste, Jansen, and Wegener (Theory Comput. Syst. 39:525–544, 2006), describes common limits on the efficiency of a broad class of randomised search heuristics. There is an obvious trade-off between the generality of the black-box model...... and the strength of the bounds that can be proven in such a model. In particular, the original black-box model provides for well-known benchmark problems relatively small lower bounds, which seem unrealistic in certain cases and are typically not met by popular search heuristics.In this paper, we introduce a more...... restricted black-box model for optimisation of pseudo-Boolean functions which we claim captures the working principles of many randomised search heuristics including simulated annealing, evolutionary algorithms, randomised local search, and others. The key concept worked out is an unbiased variation operator...

  6. Spacer for supporting fuel element boxes

    International Nuclear Information System (INIS)

    A spacer plate unit arranged externally on each side and at a predetermined level of a polygonal fuel element box for mutually supporting, with respect to one another, a plurality of the fuel element boxes forming a fuel element bundle, is formed of a first and a second spacer plate part each having the same length and the same width and being constituted of unlike first and second materials, respectively. The first and second spacer plate parts of the several spacer plate units situated at the predetermined level are arranged in an alternating continuous series when viewed in the peripheral direction of the fuel element box, so that any two spacer plate units belonging to face-to-face oriented sides of two adjoining fuel element boxes in the fuel element bundle define interfaces of unlike materials

  7. Decommissioning a tritium glove-box facility

    International Nuclear Information System (INIS)

    A large glove-box facility for handling reactive metal tritides was decommissioned. Major sections of the glove box were decontaminated and disassembled for reuse at another tritium facility. To achieve the desired results, decontamnation required repeated washing, first with organic liquids, then with water and detergents. Worker protection was provided by simple ventilation combined with careful monitoring of the work areas and employees. Several innovative techniques are described

  8. BOX-DEATH HOLLOW ROADLESS AREA, UTAH.

    Science.gov (United States)

    Weir, Gordon W.; Lane, Michael

    1984-01-01

    Geologic mapping, geochemical sampling, and a search for prospects and mineralized rock in the Box-Death Hollow Roadless Area, Utah indicate that there is little promise for the occurrence of mineral or energy resources in the area. Additional exploratory drilling by industry seems warranted if wells elsewhere in the region find oil or gas in strata as yet untested in the Box-Death Hollow Roadless Area.

  9. Decommissioning a tritium glove-box facility

    Energy Technology Data Exchange (ETDEWEB)

    Folkers, C.L.; Homann, S.G.; Nicolosi, A.S.; Hanel, S.L.; King, W.C.

    1979-08-08

    A large glove-box facility for handling reactive metal tritides was decommissioned. Major sections of the glove box were decontaminated and disassembled for reuse at another tritium facility. To achieve the desired results, decontamnation required repeated washing, first with organic liquids, then with water and detergents. Worker protection was provided by simple ventilation combined with careful monitoring of the work areas and employees. Several innovative techniques are described.

  10. BOX DIMENSIONS OF α-FRACTAL FUNCTIONS

    Science.gov (United States)

    Akhtar, Md. Nasim; Prasad, M. Guru Prem; Navascués, M. A.

    2016-08-01

    The box dimension of the graph of non-affine, continuous, nowhere differentiable function fα which is a fractal analogue of a continuous function f corresponding to a certain iterated function system (IFS), is investigated in the present paper. The estimates for box dimension of the graph of α-fractal function fα for equally spaced as well as arbitrary data sets are found.

  11. HYDROGEN AND VOC RETENTION IN WASTE BOXES

    Energy Technology Data Exchange (ETDEWEB)

    PACE ME; MARUSICH RM

    2008-11-21

    The Hanford Waste Management Project Master Documented Safety Analysis (MDSA) (HNF-14741, 2003) identifies derived safety controls to prevent or mitigate the risks of a single-container deflagration during operations requiring moving, venting or opening transuranic (TRU)-waste containers. The issue is whether these safety controls are necessary for operations involving TRU-waste boxes that are being retrieved from burial at the Hanford Site. This paper investigates the potential for a deflagration hazard within these boxes and whether safety controls identified for drum deflagration hazards should be applied to operations involving these boxes. The study evaluates the accumulation of hydrogen and VOCs within the waste box and the transport of these gases and vapors out of the waste box. To perform the analysis, there were numerous and major assumptions made regarding the generation rate and the transport pathway dimensions and their number. Since there is little actual data with regards to these assumptions, analyses of three potential configurations were performed to obtain some indication of the bounds of the issue (the concentration of hydrogen or flammable VOCs within a waste box). A brief description of each of the three cases along with the results of the analysis is summarized.

  12. A Push-pull Protocol to Reduce Colonization of Bird Nest Boxes by Honey Bees.

    Science.gov (United States)

    Efstathion, Caroline A; Kern, William H

    2016-01-01

    Introduction of the invasive Africanized honey bee (AHB) into the Neotropics is a serious problem for many cavity nesting birds, specifically parrots. These bees select cavities that are suitable nest sites for birds, resulting in competition. The difficulty of removing bees and their defensive behavior makes a prevention protocol necessary. Here, we describe a push-pull integrated pest management protocol to deter bees from inhabiting bird boxes by applying a bird safe insecticide, permethrin, to repel bees from nest boxes, while simultaneously attracting them to pheromone-baited swarm traps. Shown here is an example experiment using Barn Owl nest boxes. This protocol successfully reduced colonization of Barn Owl nest boxes by Africanized honey bees. This protocol is flexible, allowing adjustments to accommodate a wide range of bird species and habitats. This protocol could benefit conservation efforts where AHB are located. PMID:27685258

  13. Analysis of Tendencies Towards Changes in Temperatures of Railway Vehicle Axle Boxes

    Directory of Open Access Journals (Sweden)

    Olegas Lunys

    2012-11-01

    Full Text Available The paper analyzes variations in the temperature of axle-box heating of railroad rolling stock considering two modes of the train - driving and parking position. Additionally, the article describes the influence of the axle load and season on the heat of the axle-box, forecasts intolerable residual resources and explains a possibility of detecting likely breakage at the very beginning of defects. The paper also deals with scientific literature related to axle-box heating and focuses on the conducted practical and theoretical experiments. The carried out research has established the rates of operating heating and critical heating. The application of numerical values for the algorithm of automatic control devices could help with detecting the breakdowns of the axle-box before they reach a critical state and assist in forecasting residual operating resources.

  14. 49 CFR 178.517 - Standards for plastic boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Standards for plastic boxes. 178.517 Section 178... PACKAGINGS Non-bulk Performance-Oriented Packaging Standards § 178.517 Standards for plastic boxes. (a) The following are identification codes for plastic boxes: (1) 4H1 for an expanded plastic box; and (2) 4H2 for...

  15. 49 CFR 230.101 - Steam locomotive driving journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Steam locomotive driving journal boxes. 230.101... Locomotives and Tenders Running Gear § 230.101 Steam locomotive driving journal boxes. (a) Driving journal boxes. Driving journal boxes shall be maintained in a safe and suitable condition for service. Not...

  16. 变速器副箱锁销同步器结构改进的经验探讨%Discussion on the Improvement of the Transmission Side Box Latch Synchronizer Structure of Experience

    Institute of Scientific and Technical Information of China (English)

    孟嘉强

    2015-01-01

    Pin type synchronizer for a transmission auxiliary automobile transmission complete shift ,can make smooth shift ,in-crease driving comfort ,is widely used in the automotive transmission .In this paper ,the fault type for pin type synchronizer relat-ed analysis and discussion ,to share with you the improvement experience .%锁销同步器作为辅助汽车变速器完成换挡的一种变速器零部件,可以使换挡平顺,增加驾驶舒适性,在汽车变速器上被广泛应用。针对锁销式同步器的故障类型进行相关分析讨论,探讨改进经验。

  17. Notes on Experiments.

    Science.gov (United States)

    Physics Education, 1988

    1988-01-01

    Describes four physics experiments including "Investigation of Box Resonances Using a Micro"; "A Direct Reading Wattmeter, DC or AC"; "Exercises in the Application of Ohm's Law"; and "Hysteresis on Gas Discharges." Discusses procedures, instrumentation, and analysis in each example. (CW)

  18. Physical Modeling Modular Boxes: PHOXES

    DEFF Research Database (Denmark)

    Gelineck, Steven; Serafin, Stefania

    2010-01-01

    This paper presents the development of a set of musical instruments, which are based on known physical modeling sound synthesis techniques. The instruments are modular, meaning that they can be combined in various ways. This makes it possible to experiment with physical interaction and sonic...

  19. Opening Pandora's Box: The impact of open system modeling on interpretations of anoxia

    Science.gov (United States)

    Hotinski, Roberta M.; Kump, Lee R.; Najjar, Raymond G.

    2000-06-01

    The geologic record preserves evidence that vast regions of ancient oceans were once anoxic, with oxygen levels too low to sustain animal life. Because anoxic conditions have been postulated to foster deposition of petroleum source rocks and have been implicated as a kill mechanism in extinction events, the genesis of such anoxia has been an area of intense study. Most previous models of ocean oxygen cycling proposed, however, have either been qualitative or used closed-system approaches. We reexamine the question of anoxia in open-system box models in order to test the applicability of closed-system results over long timescales and find that open and closed-system modeling results may differ significantly on both short and long timescales. We also compare a scenario with basinwide diffuse upwelling (a three-box model) to a model with upwelling concentrated in the Southern Ocean (a four-box model). While a three-box modeling approach shows that only changes in high-latitude convective mixing rate and character of deepwater sources are likely to cause anoxia, four-box model experiments indicate that slowing of thermohaline circulation, a reduction in wind-driven upwelling, and changes in high-latitude export production may also cause dysoxia or anoxia in part of the deep ocean on long timescales. These results suggest that box models must capture the open-system and vertically stratified nature of the ocean to allow meaningful interpretations of long-lived episodes of anoxia.

  20. Dynamic Analysis of Horizontally Curved Thin-Walled Box-Girder Bridge due to Moving Vehicle

    Directory of Open Access Journals (Sweden)

    K. Nallasivam

    2007-01-01

    Full Text Available The impact on curved box-girder bridges due to vehicle moving across rough bridge deck have been analyzed using bridge-vehicle coupled dynamics. The bridge deck unevenness has been assumed to be a homogeneous random process in space specified by a PSD function. The analysis incorporates the effect of centrifugal forces due to vehicle moving on curved bridge. The curved box-girder bridge has been numerically modeled using computationally efficient thin-walled box-beam finite elements which take into account the torsional warping, distortion and distortional warping, that are important features of thin-walled box girders. Rigid vehicle with longitudinal and transverse input to the wheels giving rise to heave-pitch-roll degrees of freedom has been considered. The theoretical bridge model used in simulation study has been validated by a free vibration experiment using impact excitation. The impact factors for several response parameters such as bending moment, shear force, torsional moment, torsional bi-moment, distortional moment, distortional bi-moment and vertical deflections have been obtained for various bridge-vehicle parameters. Both constant velocity and forward acceleration of the vehicle have been considered to examine impact factor. The results highlighted that the impact factors of a curved box girder bridge corresponding to torsion, distortion and their corresponding bimoments have been observed to be generally very high, while those of the other responses are also relatively higher than that of corresponding straight box girder bridge.

  1. Post-training vasopressin injections may facilitate or delay shuttle-box avoidance extinction

    OpenAIRE

    Hagan, J J; Bohus, B; Wied, D. de

    1982-01-01

    After training to avoid footshock in a two-way shuttle box rats were injected with lysine vasopressin (LVP) and returned to the shuttle box 24 hr later for 10 extinction trials. Experiment 1 shows that when injected 30 min after training subsequent extinction responding varied as an inverted “U”-shaped function of the LVP dose within the range tested (0.036 to 2.97 μg/rat). Responding was increased with 0.11 μg/rat whereas 2.97 μg/rat reduced responding. Experiment 2 shows that these two dose...

  2. Advances in the theory of box integrals

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, David H.; Borwein, J.M.; Crandall, R.E.

    2009-06-25

    Box integrals - expectations <|{rvec r}|{sup s}> or <|{rvec r}-{rvec q}|{sup s}> over the unit n-cube (or n-box) - have over three decades been occasionally given closed forms for isolated n,s. By employing experimental mathematics together with a new, global analytic strategy, we prove that for n {le} 4 dimensions the box integrals are for any integer s hypergeometrically closed in a sense we clarify herein. For n = 5 dimensions, we show that a single unresolved integral we call K{sub 5} stands in the way of such hyperclosure proofs. We supply a compendium of exemplary closed forms that naturally arise algorithmically from this theory.

  3. Nearly Seamless Vacuum-Insulated Boxes

    Science.gov (United States)

    Stepanian, Christopher J.; Ou, Danny; Hu, Xiangjun

    2010-01-01

    A design concept, and a fabrication process that would implement the design concept, have been proposed for nearly seamless vacuum-insulated boxes that could be the main structural components of a variety of controlled-temperature containers, including common household refrigerators and insulating containers for shipping foods. In a typical case, a vacuum-insulated box would be shaped like a rectangular parallelepiped conventional refrigerator box having five fully closed sides and a hinged door on the sixth side. Although it is possible to construct the five-closed-side portion of the box as an assembly of five unitary vacuum-insulated panels, it is not desirable to do so because the relatively high thermal conductances of the seams between the panels would contribute significant amounts of heat leakage, relative to the leakage through the panels themselves. In contrast, the proposal would make it possible to reduce heat leakage by constructing the five-closed-side portion of the box plus the stationary portion (if any) of the sixth side as a single, seamless unit; the only remaining seam would be the edge seal around the door. The basic cross-sectional configuration of each side of a vacuum-insulated box according to the proposal would be that of a conventional vacuum-insulated panel: a low-density, porous core material filling a partially evacuated space between face sheets. However, neither the face sheets nor the core would be conventional. The face sheets would be opposite sides of a vacuum bag. The core material would be a flexible polymer-modified silica aerogel of the type described in Silica/Polymer and Silica/Polymer/Fiber Composite Aero - gels (MSC-23736) in this issue of NASA Tech Briefs. As noted in that article, the stiffness of this core material against compression is greater than that of prior aerogels. This is an important advantage because it translates to greater retention of thickness and, hence, of insulation performance when pressure is

  4. Box truss development and its application

    Science.gov (United States)

    Coyner, J. V.

    1985-04-01

    Since 1977, Martin Marietta Denver Aerospace has aggressively pursued development of deployable structural systems applicable to a wide variety of Shuttle-transportable large space system requirements. This effort has focused on the deployable box truss, mechanisms and materials development, mesh reflector design and fabrication, gate frame truss design and fabrication, and offset-fed antenna design and analysis. The activities discussed are: box truss design; metal matrix composites; precision joints; enhanced passive damping design; mesh reflector development; gate frame truss for solar arrays; 15-meter spinning radio meter; and 60 x 120 meter push broom antenna.

  5. CASAS: A Smart Home in a Box.

    Science.gov (United States)

    Cook, Diane J; Crandall, Aaron S; Thomas, Brian L; Krishnan, Narayanan C

    2013-07-01

    While the potential benefits of smart home technology are widely recognized, a lightweight design is needed for the benefits to be realized at a large scale. We introduce the CASAS "smart home in a box", a lightweight smart home design that is easy to install and provides smart home capabilities out of the box with no customization or training. We discuss types of data analysis that have been performed by the CASAS group and can be pursued in the future by using this approach to designing and implementing smart home technologies.

  6. EnergyBox: Tool improvement and GUI

    OpenAIRE

    Polis, Rihards

    2014-01-01

    EnergyBox is a parametrised estimation tool that uses packet traces as input to simulate the energy consumption of communication in mobile devices. This tool models the transmission behaviour of a smart phone by analysing a recorded packet trace from the device. The purpose of the thesis is to reimplement the original EnergyBox energy consumption modelling tool. The project aims to develop support for a graphical user interface (GUI) and a code base that is easier to modify and maintain. The ...

  7. Investigation on features and tendencies of axle-box heating

    Directory of Open Access Journals (Sweden)

    Olegas LUNYS

    2015-03-01

    Full Text Available Breakdown of rolling stock axle-boxes if not detected in due time may cause a rail accident or disaster. At present, a lot of advanced technologies, modern equipment and devices, which “recognizes” faulty axle-boxes when the train is in motion, have been implemented. However, the timely identification of breakdown of rolling stock axle-boxes still is an acute problem, the initial stage of damage emergence being especially problematic. Presently, rolling stock axle-box breakdown is determined according to the higher than permissible temperature of the axle-box body. The article provides statistical data of dangerously heated axle-boxes, determined train delay durations, the number of delayed trains by danger level, and dependence of damage on the season. After systematization of data on axle-box damage and heating temperatures of broken axle-boxes, heating tendencies of axle-boxes of freight wagons are described. Finally, basic conclusions are given.

  8. Experiência de manejo de aves em áreas antrópicas, com a utilização de caixas de madeira como locais para nidificação Experimental birds managment in anthropic areas, using nest-boxes

    Directory of Open Access Journals (Sweden)

    Luiz Octavio Marcondes-Machado

    1994-01-01

    Full Text Available Use of nest-boxes for management of cavity nesting birds in anthropic areas can give good results. In November 1987, data collection begun in UNICAMP, Campinas (São Paulo, with the objective of favouring establishment and increase in urban bird communities. The House Wren (Troglodytes aedon Viellot. 1807 and House Sparrow (Passer domesticus Linnaeus, 1758 used the nest boxes for reproduction. Nests were collected and analysed (weight, used materials, incubation chamber materials, nest form. House Sparrow used thin materials, like straw, paper and plastic, while house wren used heavy materials, like sticks, wire and tabs of soff drink cans. The nest-boxes offered favorable conditions to bird reproduction and protection in disturbed areas, and showed signs of leading to increase in diversity of species, that might use this nest-boxes for reproduction in the future.

  9. The spatial-functional coupling of box C/D and C'/D' RNPs is an evolutionarily conserved feature of the eukaryotic box C/D snoRNP nucleotide modification complex.

    Science.gov (United States)

    Qu, Guosheng; van Nues, Rob W; Watkins, Nicholas J; Maxwell, E Stuart

    2011-01-01

    Box C/D ribonucleoprotein particles guide the 2'-O-ribose methylation of target nucleotides in both archaeal and eukaryotic RNAs. These complexes contain two functional centers, assembled around the C/D and C'/D' motifs in the box C/D RNA. The C/D and C'/D' RNPs of the archaeal snoRNA-like RNP (sRNP) are spatially and functionally coupled. Here, we show that similar coupling also occurs in eukaryotic box C/D snoRNPs. The C/D RNP guided 2'-O-methylation when the C'/D' motif was either mutated or ablated. In contrast, the C'/D' RNP was inactive as an independent complex. Additional experiments demonstrated that the internal C'/D' RNP is spatially coupled to the terminal box C/D complex. Pulldown experiments also indicated that all four core proteins are independently recruited to the box C/D and C'/D' motifs. Therefore, the spatial-functional coupling of box C/D and C'/D' RNPs is an evolutionarily conserved feature of both archaeal and eukaryotic box C/D RNP complexes.

  10. Hazard Analysis of Japanese Boxed Lunches (Bento).

    Science.gov (United States)

    Bryan, Frank L.; And Others

    1991-01-01

    For the purposes of identifying contaminants, of assessing risks, and of determining critical food processing control points, hazard analyses were conducted at two "bento" (oriental boxed meals) catering operations. Time and temperature abuses during the holding period, after cooking and prior to consumption, were found to be the primary reason…

  11. A white box perspective on behavioural adaptation

    DEFF Research Database (Denmark)

    Bruni, Roberto; Corradini, Andrea; Gadducci, Fabio;

    2015-01-01

    We present a white-box conceptual framework for adaptation developed in the context of the EU Project ASCENS coordinated by Martin Wirsing. We called it CoDA, for Control Data Adaptation, since it is based on the notion of control data. CoDA promotes a neat separation between application and adap...

  12. RELIABILITY BASED DESIGN OF A GEAR BOX

    Directory of Open Access Journals (Sweden)

    D.MADHUSEKHAR

    2014-08-01

    Full Text Available Reliability is the probability that a system, component or device will perform without failure for a specified period of time under specified operating conditions. The concept of reliability is of great importance in the design of various machine members. Conventional engineering design uses a deterministic approach. It disregards the fact that the material properties, the dimensions of the components and the externally applied loads are statistical in nature. In conventional design this uncertainties are covered with a factor of safety, which is not always successful. The growing trend towards reducing uncertainty and increasing reliability is to use the probabilistic approach. In the present work a three shaft four speed gear box and six speed gear box are designed using reliability principles. For the specified reliability of the system (Gear box, component reliability (Gear pair is calculated by considering the system as a series system. Design is considered to be safe and adequate if the probability of failure of gear box is less than or equal to a specified quantity in each of the two failure modes. . All the parameters affecting the design are considered as random variables and all the random variables are assumed to follow normal distribution. A computer program in C++ is developed to calculate the face widths in bending and surface failure modes. The larger one out of the two values is considered. By changing the variations in the design parameters, variations in the face widths are studied.

  13. PVC posting bags for glove boxes

    International Nuclear Information System (INIS)

    This specification covers the materials, measurements and manufacture of unpigmented PVC posting bags for use on glove boxes, together with methods of testing the materials. These bags are used in the handling of radioactive and toxic materials of a hazardous nature and therefore must be of the highest standard of mechanical strength, leak tightness and general finish. (author)

  14. Cereal Box Design: An Interdisciplinary Graphics Activity

    Science.gov (United States)

    Fitzgerald, Mike; Tsosie, Teri

    2012-01-01

    The cereal box design activity is intriguing both for its simplicity and the resourcefulness that it can generate in young people. Also, it lends itself to a variety of curriculums. It covers both consumerism and Design for the Environment (DfE) concepts broadly and in depth. The activity introduces a wide range of topics. They include graphic…

  15. Using Story Boxes in Language Learning

    Science.gov (United States)

    Collins, Rita

    2009-01-01

    Story boxes and story bags are containers for holding realia that are used to enhance reading and provide a variety of activities for encouraging language acquisition and use. Whatever the packaging, these are good ways to develop students' interest in books. Using realia, or real-life objects, to teach a foreign language is not a novel concept.…

  16. Study of WATCH GRB error boxes

    DEFF Research Database (Denmark)

    Gorosabel, J.; Castro-Tirado, A. J.; Lund, Niels;

    1995-01-01

    We have studied the first WATCH GRB Catalogue ofγ-ray Bursts in order to find correlations between WATCH GRB error boxes and a great variety of celestial objects present in 33 different catalogues. No particular class of objects has been found to be significantly correlated with the WATCH GRBs....

  17. One-Dimensional Oscillator in a Box

    Science.gov (United States)

    Amore, Paolo; Fernandez, Francisco M.

    2010-01-01

    We discuss a quantum-mechanical model of two particles that interact by means of a harmonic potential and are confined to a one-dimensional box with impenetrable walls. We apply perturbation theory to the cases of different and equal masses and analyse the symmetry of the states in the latter case. We compare the approximate perturbation results…

  18. One-dimensional oscillator in a box

    Energy Technology Data Exchange (ETDEWEB)

    Amore, Paolo [Facultad de Ciencias, Universidad de Colima, Bernal DIaz del Castillo 340, Colima, Colima (Mexico); Fernandez, Francisco M [INIFTA (UNLP, CCT La Plata-CONICET), Division Quimica Teorica, Blvd 113 S/N, Sucursal 4, Casilla de Correo 16, 1900 La Plata (Argentina)], E-mail: paolo@ucol.mx, E-mail: fernande@quimica.unlp.edu.ar

    2010-01-15

    We discuss a quantum-mechanical model of two particles that interact by means of a harmonic potential and are confined to a one-dimensional box with impenetrable walls. We apply perturbation theory to the cases of different and equal masses and analyse the symmetry of the states in the latter case. We compare the approximate perturbation results with accurate numerical ones.

  19. SATELLITE Capabilities and Limitations for the ACPC Box Experiment

    Science.gov (United States)

    Kahn, Ralph

    2015-01-01

    This presentation was given at the Aerosol-Clouds-Precipitation-Climate (ACPC) Workshop held at NASA GISS in April 2015. The organizers of the meeting plan to post the presentations to a public website maintained by the University of Leipzig.

  20. Contaminants in ventilated filling boxes

    Science.gov (United States)

    Bolster, D. T.; Linden, P. F.

    While energy efficiency is important, the adoption of energy-efficient ventilation systems still requires the provision of acceptable indoor air quality. Many low-energy systems, such as displacement or natural ventilation, rely on temperature stratification within the interior environment, always extracting the warmest air from the top of the room. Understanding buoyancy-driven convection in a confined ventilated space is key to understanding the flow that develops with many of these modern low-energy ventilation schemes. In this work we study the transport of an initially uniformly distributed passive contaminant in a displacement-ventilated space. Representing a heat source as an ideal sourced of buoyancy, analytical and numerical models are developed that allow us to compare the average efficiency of contaminant removal between traditional mixing and modern low-energy systems. A set of small-scale analogue laboratory experiments was also conducted to further validate our analytical and numerical solutions.We find that on average traditional and low-energy ventilation methods are similar with regard to pollutant flushing efficiency. This is because the concentration being extracted from the system at any given time is approximately the same for both systems. However, very different vertical concentration gradients exist. For the low-energy system, a peak in contaminant concentration occurs at the temperature interface that is established within the space. This interface is typically designed to sit at some intermediate height in the space. Since this peak does not coincide with the extraction point, displacement ventilation does not offer the same benefits for pollutant flushing as it does for buoyancy removal.

  1. Simulation of the Test Method "L-Box" for Self-Compacting Concrete

    DEFF Research Database (Denmark)

    Thrane, Lars Nyholm; Szabo, Peter; Geiker, Mette Rica;

    2004-01-01

    Both filling and passing ability are important properties to be considered for self-compacting concrete. This paper presents simulations of the L-box test and corresponding experiments. The assumption of a continuum mechanical approach, where the fluid rheology is described by the Bingham model, is...

  2. Estimation of Radiation Limit from a Huygens' Box under Non-Free-Space Conditions

    DEFF Research Database (Denmark)

    Franek, Ondrej; Sørensen, Morten; Bonev, Ivan Bonev;

    2013-01-01

    The recently studied Huygens' box method has difficulties when radiation of an electronic module is to be determined under non-free-space conditions, i.e. with an enclosure. We propose an estimate on radiation limit under such conditions based only on the Huygens' box data from free......-space measurements. Numerical experiment shows that the limit is valid everywhere except the resonance frequencies. Consequently, it is argued that knowledge of the inner structure of the module is in fact necessary also for the limit estimation....

  3. Application of Defense Technology Commonly Used in Boxing Match

    Institute of Scientific and Technical Information of China (English)

    Zhixiao Li[1; Jianjun Liu[2

    2015-01-01

    Boxing defense technology is a kind of techniques to prevent the opponent from attacking successfully. Boxing is a kind of sports that needs close cooperation between attack and defense. Attack is used for defense, where there is no attack, there will be no defense, and vice versa. Defense technology is the foundation of attack technology, therefore, defense is of vital importance in boxing match.

  4. 76 FR 41411 - Group E Post Office Box Service

    Science.gov (United States)

    2011-07-14

    ... PO Box customers are assigned the smallest available box that reasonably accommodates their daily mail volume. b. Eligibility for Group E PO Boxes does not extend to: 1. Individual tenants, contractors... Federal Register proposed rule (75 FR 71642-71643) to clarify eligibility, simplify the standards,...

  5. 47 CFR 90.241 - Radio call box operations.

    Science.gov (United States)

    2010-10-01

    ... remains on for a period in excess of three minutes. The automatic cutoff system must be designed so the... Safety Pool for highway call box systems subject to the following requirements: (1) Call box transmitters... effective radiated power (ERP). (3) The height of a call box antenna may not exceed 6.1 meters (20...

  6. 49 CFR 230.103 - Tender roller bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender roller bearing journal boxes. 230.103... Locomotives and Tenders Running Gear § 230.103 Tender roller bearing journal boxes. Tender roller bearing journal boxes shall be maintained in a safe and suitable condition....

  7. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender plain bearing journal boxes. 230.102... Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes... expected to damage the bearing; or have a detrimental effect on the lubrication of the journal and...

  8. Fatal exit the automotive black box debate

    CERN Document Server

    Kowalick, Tom

    2005-01-01

    "Fatal Exit: The Automotive Black Box Debate cuts through thirty years of political wrangling and institutional biases to provide an argument for the Motor Vehicle Event Data Recorder (MVEDR). This automotive equivalent of an airplane's flight recorder or black box is intended to solve the mysteries of car crashes and improve the safety of our roads. The reader is taken inside the automotive industry and the government highway safety establishment to foster an understanding of the politics and the positions on all sides of this safety debate. The author takes an unbiased approach, chronologically presenting each argument and uncovering the agendas and mandates of each of the stakeholders." "This publication is essential reading for all consumers who need to have their voices heard on this critical issue, as well as for attorneys, public safety advocates, public policy administrators, engineers, automotive professionals, journalists, and insurance executives."--Jacket.

  9. The Central Nervous System of Box Jellyfish

    DEFF Research Database (Denmark)

    Garm, Anders Lydik; Ekström, Peter

    2008-01-01

    of behaviors in the box jellyfish such as obstacle avoidance and navigation. The need to process the visual information and turn it into the appropriate behavior puts strong demands on the nervous system of box jellyfish, which appears more elaborate than in other cnidarians. Here, the central part...... of this nervous system is described. Each rhopalium holds a separate part of the CNS with 1,000 nerve cells and a large amount of neuropil. The rhopalial nervous system has several subsystems defined by the anatomy, location, and immunocytochemistry of the cells. Most of the subsystems connect to one or more...... of the eye types, and it is likely that the rhopalial nervous system accounts for most of the visual processing. The major part of the CNS is made up of a ring nerve encircling the bell shaped body. The ring nerve holds around 10,000 cells and is directly connected to all four rhopalial nervous systems...

  10. Box-constrained Total-variation Image Restoration with Automatic Parameter Estimation

    Institute of Scientific and Technical Information of China (English)

    HE Chuan; HU Chang-Hua; ZHANG Wei; SHI Biao

    2014-01-01

    The box constraints in image restoration have been arousing great attention, since the pixels of a digital image can attain only a finite number of values in a given dynamic range. This paper studies the box-constrained total-variation (TV) image restoration problem with automatic regularization parameter estimation. By adopting the variable splitting technique and introducing some auxiliary variables, the box-constrained TV minimization problem is decomposed into a sequence of subproblems which are easier to solve. Then the alternating direction method (ADM) is adopted to solve the related subproblems. By means of Morozov0s discrepancy principle, the regularization parameter can be updated adaptively in a closed form in each iteration. Image restoration experiments indicate that with our strategies, more accurate solutions are achieved, especially for image with high percentage of pixel values lying on the boundary of the given dynamic range.

  11. Dynamic inhomogeneous S-Boxes design for efficient AES masking mechanisms

    Institute of Scientific and Technical Information of China (English)

    CHEN Yi-cheng; ZOU Xue-cheng; LIU Zheng-lin; CHEN Xiao-fei; HAN Yu

    2008-01-01

    It is an important challenge to implement a low- cost power analysis immune advanced encryption standard (AES) circuit. The previous study proves that substitution boxes (S-Boxes) in AES are prone to being attacked, and hard to mask for its non-linear characteristic. Besides, large amounts of circuit resources in chips and power consumption are spent in protecting S-Boxes against power analysis. Thus, a novel power analysis immune scheme is proposed, which divides the data-path of AES into two parts: inhomogeneous S-Boxes instead of fixed S-Boxes are selected randomly to disturb power and logic delay in the non-linear module; at the same time, the general masking strategy is applied in the linear part of AES. This improved AES circuit was synthesized with united microelectronics corporation (UMC) 0.25 μm 1.8 V complementary metal-oxide-semiconductor (CMOS) standard cell library, and correlation power analysis experiments were executed. The results demonstrate that this secure AES implementation has very low hardware cost and can enhance the AES security effectually against power analysis.

  12. SimpleBox 4.0: Improving the model while keeping it simple….

    Science.gov (United States)

    Hollander, Anne; Schoorl, Marian; van de Meent, Dik

    2016-04-01

    Chemical behavior in the environment is often modeled with multimedia fate models. SimpleBox is one often-used multimedia fate model, firstly developed in 1986. Since then, two updated versions were published. Based on recent scientific developments and experience with SimpleBox 3.0, a new version of SimpleBox was developed and is made public here: SimpleBox 4.0. In this new model, eight major changes were implemented: removal of the local scale and vegetation compartments, addition of lake compartments and deep ocean compartments (including the thermohaline circulation), implementation of intermittent rain instead of drizzle and of depth dependent soil concentrations, adjustment of the partitioning behavior for organic acids and bases as well as of the value for enthalpy of vaporization. In this paper, the effects of the model changes in SimpleBox 4.0 on the predicted steady-state concentrations of chemical substances were explored for different substance groups (neutral organic substances, acids, bases, metals) in a standard emission scenario. In general, the largest differences between the predicted concentrations in the new and the old model are caused by the implementation of layered ocean compartments. Undesirable high model complexity caused by vegetation compartments and a local scale were removed to enlarge the simplicity and user friendliness of the model. PMID:26802268

  13. The gradient flow in a twisted box

    Energy Technology Data Exchange (ETDEWEB)

    Ramos, Alberto [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany). John von Neumann-Inst. fuer Computing NIC

    2013-08-15

    We study the perturbative behavior of the gradient flow in a twisted box. We apply this information to define a running coupling using the energy density of the flow field. We study the step-scaling function and the size of cutoff effects in SU(2) pure gauge theory. We conclude that the twisted gradient flow running coupling scheme is a valid strategy for step-scaling purposes due to the relatively mild cutoff effects and high precision.

  14. Adaptive Techniques to find Optimal Planar Boxes

    CERN Document Server

    Barbay, J; Pérez-Lantero, P

    2012-01-01

    Given a set $P$ of $n$ planar points, two axes and a real-valued score function $f()$ on subsets of $P$, the Optimal Planar Box problem consists in finding a box (i.e. axis-aligned rectangle) $H$ maximizing $f(H\\cap P)$. We consider the case where $f()$ is monotone decomposable, i.e. there exists a composition function $g()$ monotone in its two arguments such that $f(A)=g(f(A_1),f(A_2))$ for every subset $A\\subseteq P$ and every partition $\\{A_1,A_2\\}$ of $A$. In this context we propose a solution for the Optimal Planar Box problem which performs in the worst case $O(n^2\\lg n)$ score compositions and coordinate comparisons, and much less on other classes of instances defined by various measures of difficulty. A side result of its own interest is a fully dynamic \\textit{MCS Splay tree} data structure supporting insertions and deletions with the \\emph{dynamic finger} property, improving upon previous results [Cort\\'es et al., J.Alg. 2009].

  15. T-box factors determine cardiac design.

    Science.gov (United States)

    Hoogaars, W M H; Barnett, P; Moorman, A F M; Christoffels, V M

    2007-03-01

    The heart of higher vertebrates is a structurally complicated multi-chambered pump that contracts synchronously. For its proper function a number of distinct integrated components have to be generated, including force-generating compartments, unidirectional valves, septa and a system in charge of the initiation and coordinated propagation of the depolarizing impulse over the heart. Not surprisingly, a large number of regulating factors are involved in these processes that act in complex and intertwined pathways to regulate the activity of target genes responsible for morphogenesis and function. The finding that mutations in T-box transcription factor-encoding genes in humans lead to congenital heart defects has focused attention on the importance of this family of regulators in heart development. Functional and genetic analyses in a variety of divergent species has demonstrated the critical roles of multiple T-box factor gene family members, including Tbx11, -2, -3, -5, -18 and -20, in the patterning, recruitment, specification, differentiation and growth processes underlying formation and integration of the heart components. Insight into the roles of T-box factors in these processes will enhance our understanding of heart formation and the underlying molecular regulatory pathways. PMID:17380306

  16. Effectiveness of box trainers in laparoscopic training

    Directory of Open Access Journals (Sweden)

    Dhariwal Anender

    2007-01-01

    Full Text Available Rationale and Objectives: Various devices are used to aid in the education of laparoscopic skills ranging from simple box trainers to sophisticated virtual reality trainers. Virtual reality system is an advanced and effective training method, however it is yet to be adopted in India due to its cost and the advanced technology required for it. Therefore, box trainers are being used to train laparoscopic skills. Hence this study was undertaken to assess the overall effectiveness of the box-training course. Study Procedure: The study was conducted during six-day laparoscopic skills training workshops held during 2006. Twenty five surgeons; age range of 26 to 45 years, of either sex, who had not performed laparoscopic surgery before; attending the workshop were evaluated. Each participant was given a list of tasks to perform before beginning the box-training course on day one and was evaluated quantitatively by rating the successful completion of each test. Evaluation began when the subject placed the first tool into the cannula and ended with task completion. Two evaluation methods used to score the subject, including a global rating scale and a task-specific checklist. After the subject completed all sessions of the workshop, they were asked to perform the same tasks and were evaluated in the same manner. For each task completed by the subjects, the difference in the scores between the second and first runs were calculated and interpreted as an improvement as a percentage of the initial score. Statistical Analysis: Wilcoxon matched-paired signed-ranks test was applied to find out the statistical significance of the results obtained. Results: The mean percentage improvement in scores for both the tasks, using global rating scale, was 44.5% + 6.930 (Mean + SD. For task 1, using the global rating scale mean percentage improvement was 49.4% + 7.948 (Mean + SD. For task 2, mean percentage improvement using global rating scale was 39.6% + 10.4 (Mean

  17. A resting box for outdoor sampling of adult Anopheles arabiensis in rice irrigation schemes of lower Moshi, northern Tanzania

    Directory of Open Access Journals (Sweden)

    Msangi Shandala

    2009-04-01

    Full Text Available Abstract Background Malaria vector sampling is the best method for understanding the vector dynamics and infectivity; thus, disease transmission seasonality can be established. There is a need to protecting humans involved in the sampling of disease vectors during surveillance or in control programmes. In this study, human landing catch, two cow odour baited resting boxes and an unbaited resting box were evaluated as vector sampling tools in an area with a high proportion of Anopheles arabiensis, as the major malaria vector. Methods Three resting boxes were evaluated against human landing catch. Two were baited with cow odour, while the third was unbaited. The inner parts of the boxes were covered with black cloth materials. Experiments were arranged in latin-square design. Boxes were set in the evening and left undisturbed; mosquitoes were collected at 06:00 am the next morning, while human landing catch was done overnight. Results A total of 9,558 An. arabiensis mosquitoes were collected. 17.5% (N = 1668 were collected in resting box baited with cow body odour, 42.5% (N = 4060 in resting box baited with cow urine, 15.1% (N = 1444 in unbaited resting box and 24.9% (N = 2386 were collected by human landing catch technique. In analysis, the house positions had no effect on the density of mosquitoes caught (DF = 3, F = 0.753, P = 0.387; the sampling technique had significant impact on the caught mosquitoes densities (DF = 3, F 37. 944, P Conclusion Odour-baited resting boxes have shown the possibility of replacing the existing traditional method (human landing catch for sampling malaria vectors in areas with a high proportion of An. arabiensis as malaria vectors. Further evaluations of fermented urine and longevity of the urine odour still need to be investigated.

  18. DFBX boxes - electrical and cryogenic distribution boxes for the superconducting magnets in the LHC straight sections

    CERN Document Server

    Zbasnik, J P; Gourlay, S A; Green, M A; Hafalia, A Q; Kajiyama, Y; Knolls, M J; La Mantia, R F; Rasson, J E; Reavill, D; Turner, W C

    2003-01-01

    DFBX distribution boxes provide cryogenic and electrical services to superconducting quadrupoles and to a superconducting dipole at either end of four of the long straight sections in the LHC. The DFBX boxes also provide instrumentation and quench protection to the magnets. Current for the quadrupole and the dipole magnet is delivered through leads that combine HTS and gas cooled leads. Current for the 600 A and 120 A correction magnets is provided by pure gas-cooled leads. The bus bars from the leads to the magnets pass through low leak-rate lambda plugs between 1.8 K and 4.4 K. The heat leak into the 1.9 K region from the liquid helium tank is determined by the design of the lambda plugs. This paper describes the DFBX boxes and their function of delivering current and instrumentation signals to the magnets. (2 refs).

  19. 49 CFR 178.512 - Standards for steel or aluminum boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Standards for steel or aluminum boxes. 178.512... aluminum boxes. (a) The following are identification codes for steel or aluminum boxes: (1) 4A for a steel box; and (2) 4B for an aluminum box. (b) Construction requirements for steel or aluminum boxes are...

  20. Cooking Food in Bogota Using a Box Cooker

    Directory of Open Access Journals (Sweden)

    Silvio Alejandro Jiménez Castellanos

    2015-10-01

    Full Text Available This paper aims to present the transient temperature field of a basic box type solar cooker (without attachments such as double glazing, internal reflectors, external reflectors, steam relief line, etc. for Bogotá – Colombia climate conditions, in order to determine if this device can cook on its town. The methodology consisted of three main stages: the development of a physical – mathematical model for heating process, based on energy balances for each of its components: glass container lid, container, absorber wall and fluid, the development of a computational experiment in the software Autodesk Algor Simulation and the comparison of the results. The final water temperature obtained by the physical - mathematical model was 81.85 ℃, and the maximum obtained with the thermal simulation was 79.60 ℃. From the results, it can be concluded that conditions in Bogotá DC are not appropriate to cook with a device of this kind.

  1. Experimental Grey Box Model Identification of an Active Gas Bearing

    DEFF Research Database (Denmark)

    Theisen, Lukas Roy Svane; Pierart Vásquez, Fabián Gonzalo; Niemann, Hans Henrik;

    2014-01-01

    Gas bearings have inherent dynamics that gives rise to low damping and potential instability at certain rotational speeds. Required damping and stabilization properties can be achieved by active ow control if bearing parameters are known. This paper deals with identifacation of parameters...... in a dynamic model of an active gas bearing and subsequent control loop design. A grey box model is determined based on experiments where piezo actuated valves are used to perturb the journal and hence excite the rotor-bearing system. Such modelling from actuator to output is shown to effciently support...... controller design, in contrast to impact models that focus on resonance dynamics. The identified model is able to accurately reproduce the lateral dynamics of the rotor-bearing system in a desired operating range, in this case around the first two natural frequencies. The identified models are validated...

  2. Channeling experiment

    International Nuclear Information System (INIS)

    Channeling of water flow and tracer transport in real fractures in a granite body at Stripa have been investigated experimentally. The experimental site was located 360 m below the ground level. Two kinds of experiments were performed. In the single hole experiments, 20 cm diameter holes were drilled about 2.5 m into the rock in the plane of the fracture. Specially designed packers were used to inject water into the fracture in 5 cm intervals all along the fracture trace in the hole. The variation of the injection flowrates along the fracture were used to determine the transmissivity variations in the fracture plane. Detailed photographs were taken from inside the hole and the visual fracture aperture was compared with the injection flowrates in the same locations. Geostatistical methods were used to evaluate the results. Five holes were measured in great detail. In addition 7 holes were drilled and scanned by simpler packer systems. A double hole experiment was performed where two parallel holes were drilled in the same fracture plane at nearly 2 m distance. Pressure pulse tests were made between the holes in both directions. Tracers were injected in 5 locations in one hole and monitored for in many locations in the other hole. The single hole experiment and the double hole experiment show that most of the fracture planes are tight but that there are open sections which form connected channels over distances of at least 2 meters. It was also found in the double hole experiment that the investigated fracture was intersected by at least one fracture between the two holes which diverted a large amount of the injected tracers to several distant locations at the tunnel wall. (authours)

  3. Adaptation of Black-Box Software Components

    Directory of Open Access Journals (Sweden)

    Rolf Andreas Rasenack

    2008-01-01

    Full Text Available The globalization of the software market leads to crucial problems for software companies. More competition between software companies arises and leads to the force on companies to develop ever newer software products in ever shortened time interval. Therefore the time to market for software systems is shortened and obviously the product life cycle is shortened too. Thus software companies shortened the time interval for research and development. Due to the fact of competition between software companies software products have to develop low-priced and this leads to a smaller return on investment. A big challenge for software companies is the use of an effective research and development process to have these problems under control. A way to control these problems can be the reuse of existing software components and adapt those software components to new functionality or accommodate mismatched interfaces. Complete redevelopment of software products is more expensive and time consuming than to develop software components. The approach introduced here presents novel technique together with a supportive environment that enables developers to cope with the adaptability of black-box software components. A supportive environment will be designed that checks the compatibility of black-box software components with the assistance of their specifications. Generated adapter software components can take over the part of adaptation and advance the functionality. Besides, a pool of software components can be used to compose an application to satisfy customer needs. Certainly this pool of software components consists of black-box software components and adapter software components which can be connected on demand.

  4. The Advanced Laboratory: beyond the ``black box'' to real physics

    Science.gov (United States)

    Zimmerman, George; Sulak, Lawrence

    2008-04-01

    The balance between theory and experiment in present physics curricula is too heavily weighted towards theory. Our physics majors do not realize that ``truth in physics'' depends either on experimental verification of theoretical predictions or on serendipitous discovery. Nor do they appreciate that most theories originate to explain experimental facts. They regard instruments as ``black boxes'' (although usually they are painted a different color). The Advanced Laboratory is essentially the only place in the curriculum where students confront the link between theory and experiment. In this age of disposing of (rather than repairing) equipment, Advanced Lab gives students insight into the inner workings of instruments and essential hands-on skills exploiting them: soldering wires, transferring cryo liquids, achieving high vacuum, acquiring reliable data, evaluating errors, fitting data, and drafting a PRL. Students learn techniques critical to several branches of physics, leading to different experimental approaches in their eventual work. If a student pursues theory, AdLab teaches her how to evaluate experiments, experimentalists, and their data. The basic skills learned, and the resulting understanding of physics, will be illustrated with the experiment on the Quantum Hall Effect from our AdLab.

  5. Experimental Study on Stability of Breakwaters with Penetrating Box Foundations

    Institute of Scientific and Technical Information of China (English)

    别社安; 李伟; 李增志; 任增金; 及春宁

    2003-01-01

    The breakwater with top-sealed, shallow and wide penetrating box foundations is a new type of structure, applicable to deep water and soft seabed. The relations of horizontal and vertical bearing capacities of the box foundation structure as well as the instability-induced failure modes to its dimensions and external loads are discussed through static model tests and wave tests. The mechanical properties of the stability of the box foundation are similar to those of embedded rigid foundations, i.e. the vertical stresses at the bottom of the box are distributed in a linear pattern under the action of vertical loads, and passive and active soil pressures are developed at the front and back sides of the box under the action of horizontal loads; there are two instability-induced failure modes of the foundation structure-horizontal slide along the box base and tilting due to insufficient local vertical bearing capacity of the soil beneath the box base. The stability of box foundations can be analyzed by use of the methods applied to analysis of the embedded rigid foundations. To increase the width of the box is the most effective way to improve the stability of box foundations.

  6. Test procedure for boxed waste assay system

    International Nuclear Information System (INIS)

    This document, prepared by Los Alamos National Laboratory's NMT-4 group, details the test methodology and requirements for Acceptance/Qualification testing of a Boxed Waste Assay System (BWAS) designed and constructed by Pajarito Scientific Corporation. Testing of the BWAS at the Plutonium Facility (TA55) at Los Alamos National Laboratory will be performed to ascertain system adherence to procurement specification requirements. The test program shall include demonstration of conveyor handling capabilities, gamma ray energy analysis, and imaging passive/active neutron accuracy and sensitivity. Integral to these functions is the system's embedded operating and data reduction software

  7. MULTIFRACTAL FORMALISMS:BOXED VERSUS CENTERED INTERVALS

    Institute of Scientific and Technical Information of China (English)

    Jacques Peyriére

    2003-01-01

    There are mainly two approaches to the multifractal analysis of measures.The first one,which is used in applications and in studying problems arising from dynamical systems,uses a hierarchy of boxes.The second one,which is more satisfactory from the viewpoint of geometric measure theory, uses more intrinsic concepts.This article is an account of a work by J.Barral,F.Ben Nasr,and J.Peyriére[3] which provides a bridge between these two theories.

  8. The Transformation of the "Black Box"

    OpenAIRE

    JIMENEZ DOMENECH, LUCIA

    2012-01-01

    The idea of this project is to convert an old office building downtown into an energy-neutral high-rise village. The assignment contained the office building located in the city centre of Groningen at Eendrachtskade 2, commonly called the "Black Box". It was built in 1976, and the actual technical condition is poor with inadequate insulation. When the building remains empty in 2014, the most obvious next thing to happen is the demolition. But, due to climate impact, the objective is to reuse ...

  9. LHC Crab Cavity Coupler Test Boxes

    CERN Document Server

    Mitchell, James; Burt, Graeme; Calaga, Rama; Macpherson, Alick; Montesinos, Eric; Silva, Subashini; Tutte, Adam; Xiao, Binping

    2016-01-01

    The LHC double quarter wave (DQW) crab cavities have two different types of Higher Order Mode (HOM) couplers in addition to a fundamental power coupler (FPC). The FPC requires conditioning, so to achieve this we have designed a radio-frequency (RF) quarter wave resonator to provide high transmission between two opposing FPCs. For the HOM couplers we must ensure that the stop-band filter is positioned at the cavity frequency and that peak transmission occurs at the same frequencies as the strongest HOMs. We have designed two test boxes which preserve the cavity spectral response in order to test the couplers.

  10. Smart Distribution Boxes, Complete Energy Management

    Energy Technology Data Exchange (ETDEWEB)

    Platise, Uros

    2010-09-15

    Present households demand side management implementations are turning conventional appliances into smart ones to support auto demand (AutoDR) response function. Present concept features a direct link between the power meters and appliances. In this paper new concept and example of implementation of a so-called Smart Distribution Box (SmartDB) is represented for complete energy and power management. SmartDBs, as an intermediate layer, are extending smart grid power meter functionality to support AutoDR with fast and guaranteed response times, distributed power sources, and besides provide full control over energy management and extra safety functions to the consumers.

  11. Determinants of Box Products of Paths

    CERN Document Server

    Pragel, Daniel

    2011-01-01

    Suppose that G is the graph obtained by taking the box product of a path of length n and a path of length m. Let M be the adjacency matrix of G. If n=m, H.M. Rara showed in 1996 that det(M)=0. We extend this result to allow n and m to be any positive integers, and show that, if gcd(n+1,m+1)>1, then det(M)=0; otherwise, if gcd(n+1,m+1)=1, then det(M)=(-1)^(nm/2).

  12. Choreographies with Secure Boxes and Compromised Principals

    DEFF Research Database (Denmark)

    Carbone, Marco; Guttman, Joshua

    2009-01-01

      We equip choreography-level session descriptions with a simple abstraction of a security infrastruc- ture. Message components may be enclosed within (possibly nested) ”boxes” annotated with the intended source and destination of those components. The boxes are to be implemented with cryp...... regular strands so that it could actually occur, in combination with any possible activity of compromised principals. It is delivery guaranteed (DG) realized if, in addition, every message transmitted to a regular participant is also delivered. We define a novel transition system on skeletons, in which...

  13. Box model for channels of human migration

    CERN Document Server

    Vitanov, Nikolay K

    2016-01-01

    We discuss a mathematical model of migration channel based on the truncated Waring distribution. The truncated Waring distribution is obtained for a more general model of motion of substance through a channel containing finite number of boxes. The model is applied then for case of migrants moving through a channel consisting of finite number of countries or cities. The number of migrants in the channel strongly depends on the number of migrants that enter the channel through the country of entrance. It is shown that if the final destination country is very popular then large percentage of migrants may concentrate there.

  14. An Architectural Alternative to the Big Box

    OpenAIRE

    Fowler, Kristen Faye

    2008-01-01

    Wal-Mart has plans to open a store in the town of Blacksburg, Virginia. The fact that there is already a Wal-Mart store, in the town of Christiansburg, just four miles away from the proposed location makes this idea ridiculous for some. A large group of Blacksburg residents are opposed to the idea of a Wal-Mart in their town. The usual complaints are about how it will affect small businesses and traffic. The core concept of the â big boxâ store is not the problem. The idea of being abl...

  15. Teaching Outside the Box: ARL Librarians' Integration of the "One- Box" into Student Instruction

    Science.gov (United States)

    Kulp, Christina; McCain, Cheryl; Scrivener, Laurie

    2014-01-01

    This article reports the results of a survey that targeted reference and instruction librarians who work at libraries that are members of the Asso- ciation of Research Libraries (ARL). Respondents were asked to indicate whether or not they teach students to use the one-box tool, and why or why not. Based on the responses of the 352 librarians who…

  16. Hairy Black Holes in a Box

    CERN Document Server

    Basu, Pallab; Subramanian, P N Bala

    2016-01-01

    We do a systematic study of the phases of gravity coupled to an electromagnetic field and charged scalar in flat space, with box boundary conditions. The scalar-less box has previously been investigated by Braden, Brown, Whiting and York (and others) before AdS/CFT and we elaborate and extend their results in a language more familiar from holography. The phase diagram of the system is analogous to that of AdS black holes, but we emphasize the differences and explain their origin. Once the scalar is added, we show that the system admits both boson stars as well as hairy black holes as solutions, providing yet another way to evade flat space no-hair theorems. Furthermore both these solutions can exist as stable phases in regions of the phase diagram. The final picture of the phases that emerges is strikingly similar to that found recently for holographic superconductors in global AdS, arXiv: 1602.07211. Our construction lays bare certain previously unnoticed subtleties associated to the definition quasi-local c...

  17. Roles of F-box Proteins in Plant Hormone Responses

    Institute of Scientific and Technical Information of China (English)

    Haichuan YU; Jiao WU; Nanfei XU; Ming PENG

    2007-01-01

    The F-box protein is an important component of the E3 ubiquitin ligase Skpl-Cullin-F-box protein complex. It binds specific substrates for ubiquitin-mediated proteolysis. The F-box proteins contain a signature F-box motif at their amino-terminus and some protein-protein interaction motifs at their carboxyterminus, such as Trp-Asp repeats or leucine rich repeats. Many F-box proteins have been identified to be involved in plant hormone response as receptors or important medial components. These breakthrough findings shed light on our current understanding of the structure and function of the various F-box proteins,their related plant hormone signaling pathways, and their roles in regulating plant development.

  18. Visual pigments of the box jellyfish species Chiropsella bronzie

    DEFF Research Database (Denmark)

    O*Connor, Megan; Garm, Anders Lydik; Marshall, Justin;

    2010-01-01

    Box jellyfish (Cubomedusae) possess a unique visual system comprising 24 eyes of four morphological types. Moreover, box jellyfish display several visually guided behaviours, including obstacle avoidance and light-shaft attractance. It is largely unknown what kind of visual information box...... jellyfish use for carrying out these behaviours. Brightness contrast is almost certainly involved, but it is also possible that box jellyfish extract colour information from their surroundings. The possible presence of colour vision in box jellyfish has previously been investigated using behavioural......, electrophysiological and immunohistochemical methods. However, the results from these studies are to some degree conflicting and inconclusive. Here, we present results from an investigation into the visual system of the box jellyfish Chiropsella bronzie, using microspectrophotometry and immunohistochemistry. Our...

  19. Average of Distribution and Remarks on Box-Splines

    Institute of Scientific and Technical Information of China (English)

    LI Yue-sheng

    2001-01-01

    A class of generalized moving average operators is introduced, and the integral representations of an average function are provided. It has been shown that the average of Dirac δ-distribution is just the well known box-spline. Some remarks on box-splines, such as their smoothness and the corresponding partition of unity, are made. The factorization of average operators is derived. Then, the subdivision algorithm for efficient computing of box-splines and their linear combinations follows.

  20. Ion-wake field inside a glass box

    Science.gov (United States)

    Chen, Mudi; Dropmann, Michael; Zhang, Bo; Matthews, Lorin S.; Hyde, Truell W.

    2016-09-01

    The confinement provided by a glass box is proving ideal for the formation of vertically aligned structures and a convenient method for controlling the number of dust particles comprising these dust structures as well as their sizes and shapes. In this paper, the electronic confinement of the glass box is mapped, and the particle interactions between the particle pairs inside the glass box are measured. The ion-wake field is shown to exist within the glass box, and its vertical and horizontal extents are measured.

  1. Ion-wake Field inside a Glass Box

    CERN Document Server

    Chen, Mudi; Zhang, Bo; Matthews, Lorin S; Hyde, Truell W

    2016-01-01

    The confinement provided by a glass box is proving ideal for the formation of vertically aligned structures and a convenient method for controlling the number of dust particles comprising these dust structures, as well as their size and shape. In this paper, the electronic confinement of the glass box is mapped and the particle interactions between the particle pairs inside the glass box are measured. The ion-wake field is shown to exist within the glass box and its vertical and horizontal extent is measured.

  2. A study on the experiment of kick-boxing aerobics in the aerobics teaching of boy students in colleges and universities%有氧搏击操在普通高校男生健美操教学中的实验研究

    Institute of Scientific and Technical Information of China (English)

    陈善凤

    2009-01-01

    Through study on the application of kick-boxing aerobics in the aerobics teaching of boy students in colleges and universities, this article gets the results that the kick-boxing aerobics is not only effective to develop the interesting of study aerobics and strengthen their physical quality, but also improve the popularity of the aerobics in boy students.%对有氧搏击操在普通高校男生健美操教学中的应用进行研究,结果表明:有氧搏击操锻炼不仅能有效提高男生学习健美操的兴趣,增强其身体素质,而且还能促进健美操在高校男生中的普及.

  3. Performance Evaluation of a Double-Glazed Box-Type Solar Oven with Reflector

    Directory of Open Access Journals (Sweden)

    Joshua Folaranmi

    2013-01-01

    Full Text Available This research paper describes the performance evaluation of a double-glazed box-type solar oven with reflector fabricated using locally available materials, compressed sawdust with binder; size of the box is 700 mm ×  700 mm × 400 mm and 10 mm thickness. The experimental solar cooker consists of an aluminium absorber plate (1 mm painted matt black and a double-glazed lid. The bottom and sides are lagged with fibreglass wool insulator, thickness = 50 mm,  W/m°C. The reflector consists of a wooden-framed commercially available specular plane mirror which is sized to form a cover for the box when not being in use. Its thermal performance was tested according to the ASAE International Test procedure and Bureau of Indian Standards (BIS for testing the thermal performance of box-type solar cooker. Thermal performance experiments were conducted in order to determine the first figure of merit (F1, the second figure of merit (F2 and standard cooking power (Ps. The obtained test results were employed to calculate the two figures of merit (F1, and F2 and the standard cooking power (P50 to be 0.11 Km2w−1, 0.31, and 23.95 W, respectively. Finally, the results illustrated that the cooker has a good reliability for cooking food and boiling water.

  4. Counting Closed String States in a Box

    CERN Document Server

    Meana, M L; Peñalba, J P; Meana, Marco Laucelli; Peñalba, Jesús Puente

    1997-01-01

    The computation of the microcanonical density of states for a string gas in a finite volume needs a one by one count because of the discrete nature of the spectrum. We present a way to do it using geometrical arguments in phase space. We take advantage of this result in order to obtain the thermodynamical magnitudes of the system. We show that the results for an open universe exactly coincide with the infinite volume limit of the expression obtained for the gas in a box. For any finite volume the Hagedorn temperature is a maximum one, and the specific heat is always positive. We also present a definition of pressure compatible with R-duality seen as an exact symmetry, which allows us to make a study on the physical phase space of the system. Besides a maximum temperature the gas presents an asymptotic pressure.

  5. Design Research: Six Views in a Box

    DEFF Research Database (Denmark)

    2011-01-01

    This book is a report from a class on design research at the Danish Design School. Ten students had ten weeks to conduct design research based on approaches, methods and techniques from co-design focusing on the Alzheimer’s disease as experienced by people with Alzheimer’s, their relatives...... and close relations, and professional caretakers. Alzheimer's destroys brain cells, causing memory loss and problems with thinking and behavior severe enough to affect work, lifelong hobbies and social life. As Alzheimer’s is a fatal disease that affects many people, there is a strong interest in finding...... professional organizations in a user-driven approach to explore and learn what it means to identify and admit that a person has Alzheimer’s. Apart from making contributions to the common box, the students have written reports in which they reflect on their work both in relation to the design research process...

  6. Developing and user-testing Decision boxes to facilitate shared decision making in primary care - a study protocol

    Directory of Open Access Journals (Sweden)

    Rousseau François

    2011-03-01

    Full Text Available Abstract Background Applying evidence is one of the most challenging steps of evidence-based clinical practice. Healthcare professionals have difficulty interpreting evidence and translating it to patients. Decision boxes are summaries of the most important benefits and harms of diagnostic, therapeutic, and preventive health interventions provided to healthcare professionals before they meet the patient. Our hypothesis is that Decision boxes will prepare clinicians to help patients make informed value-based decisions. By acting as primers, the boxes will enhance the application of evidence-based practices and increase shared decision making during the clinical encounter. The objectives of this study are to provide a framework for developing Decision boxes and testing their value to users. Methods/Design We will begin by developing Decision box prototypes for 10 clinical conditions or topics based on a review of the research on risk communication. We will present two prototypes to purposeful samples of 16 family physicians distributed in two focus groups, and 32 patients distributed in four focus groups. We will use the User Experience Model framework to explore users' perceptions of the content and format of each prototype. All discussions will be transcribed, and two researchers will independently perform a hybrid deductive/inductive thematic qualitative analysis of the data. The coding scheme will be developed a priori from the User Experience Model's seven themes (valuable, usable, credible, useful, desirable, accessible and findable, and will include new themes suggested by the data (inductive analysis. Key findings will be triangulated using additional publications on the design of tools to improve risk communication. All 10 Decision boxes will be modified in light of our findings. Discussion This study will produce a robust framework for developing and testing Decision boxes that will serve healthcare professionals and patients alike. It

  7. A Comparison of Energy Expenditure During "Wii Boxing" Versus Heavy Bag Boxing in Young Adults.

    Science.gov (United States)

    Perusek, Kristen; Sparks, Kenneth; Little, Kathleen; Motley, Mary; Patterson, Sheila; Wieand, Jennifer

    2014-02-01

    Traditional computer videogames are sedentary, whereas new computer videogames, such as the Nintendo(®) (Redmond, WA) "Wii™ Sports" games, allow users to physically interact while playing the sport. Energy expenditure (EE), heart rate (HR), and rating of perceived exertion (RPE) during heavy bag boxing versus the Nintendo "Wii Boxing" game were compared. Fifteen males and 14 females (mean age, 25.6 years; height, 171.3 cm; weight, 71.8 kg) randomly selected (by a coin toss) heavy bag boxing or "Wii Boxing" for their first test session and completed the other protocol at their second session at least 2 days later. Each session lasted for a total duration of 30 minutes and consisted of 10 3-minute exercise bouts with measurements of HR, RPE, and EE obtained from indirect calorimetry. A paired-samples t test was used to analyze the results. Significant differences were found for HR (bag, 156 beats per minute; Wii, 138 beats per minute; P=0.001) and RPE (bag, 13.8; Wii, 11.4; P=0.0001) but not for EE (bag, 8.0 kcal/minute; Wii, 7.1 kcal/minute; bag, 241 total kcal; Wii, 213 total kcal; P=0.078). The results suggest that computer active videogames, such as the Nintendo Wii, have the potential to provide similar EE as their traditional forms of exercise and may be a sufficient replacement for traditional target HR zone activities, especially in less fit individuals. Further research is needed to compare EE for different "Wii Sports" games with those for their traditional forms of exercise.

  8. Validating SimpleBox-Computed Steady-State Concentration Ratios

    NARCIS (Netherlands)

    Bakker J; Brandes LJ; Hollander HA den; Meent D van de; Struijs J; SEC; IMP; LER

    2004-01-01

    The validity of the multi-media model SimpleBox version 2.0 with respect to its specific use in the procedure of testing the coherence of independently derived environmental quality objectives is evaluated. The SimpleBox procedure for testing the coherence of environmental quality objectives has bee

  9. Olympic Sports(ⅩⅣ):Boxing

    Institute of Scientific and Technical Information of China (English)

    姜全红

    2004-01-01

    Boxing has a long sporting history.The earliest evidence of boxing is found in Egypt around 3000 B.C.The sport was introduced to the Olympic Games by the Greeks in the late 7th century B.C.. Greek boxers used thongs of soft leather to bind their hands

  10. Faster Black-Box Algorithms Through Higher Arity Operators

    DEFF Research Database (Denmark)

    Doerr, Benjamin; Johannsen, Daniel; Kötzing, Timo;

    2011-01-01

    We extend the work of Lehre and Witt (GECCO 2010) on the unbiased black-box model by considering higher arity variation operators. In particular, we show that already for binary operators the black-box complexity of LeadingOnes drops from (n2) for unary operators to O(n log n). For OneMax, the (n...

  11. Effect of auricular acupuncture on oxygen consumption of boxing athletes

    Institute of Scientific and Technical Information of China (English)

    LIN Zen-Pin; WANG Chung-Yuan; JANO Tsong-Rong; MA Tso-chiang; CHIA Fan; LIN Jaung-Geng; HSU Jen-Jeng; HO Tsung-Jung

    2009-01-01

    @@ Boxing is an official sport at the 2008 Beijing Olympic Games and the fast development of world-class high strength training and sport science has made a significant impact on scientific training. Boxing needs high cardio-respiratory function, speed, muscle strength, and anaerobic and intensive physical demands including weight control covering the grading of athlete's.

  12. 49 CFR 215.107 - Defective plain bearing box: General.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.107 Defective plain bearing box: General. A railroad may not place or continue in service a car, if the car has— (a) A plain bearing box that does not contain visible free oil; (b) A...

  13. Empty Tissue Boxes: Considering Poverty in Diversity Discourse

    Science.gov (United States)

    Cuthrell, Kristen; Ledford, Carolyn; Stapleton, Joy

    2007-01-01

    A preservice teacher doing her internship overhears some of her students asking a classmate why he regularly takes home empty tissue boxes. The boy replies that he builds cities and bridges with his empty boxes. His classmates then ask why he does not just build a city with Legos or building blocks. The preservice teacher listens intently as the…

  14. Natural Interaction Based Online Military Boxing Learning System

    Science.gov (United States)

    Yang, Chenglei; Wang, Lu; Sun, Bing; Yin, Xu; Wang, Xiaoting; Liu, Li; Lu, Lin

    2013-01-01

    Military boxing, a kind of Chinese martial arts, is widespread and health beneficial. In this paper, the authors introduce a military boxing learning system realized by 3D motion capture, Web3D and 3D interactive technologies. The interactions with the system are natural and intuitive. Users can observe and learn the details of each action of the…

  15. A System for Cooling inside a Glove Box

    Science.gov (United States)

    Sanz, Martial

    2010-01-01

    An easy, efficient, reliable, and low-cost method of constructing a cooling system using a simple circulating pump is described. The system is employed in conjunction with an inert atmosphere glove box to achieve the synthesis of air- and moisture-sensitive compounds inside the glove box at controlled, low temperatures without contaminating the…

  16. Dream Box Learning. What Works Clearinghouse Intervention Report

    Science.gov (United States)

    What Works Clearinghouse, 2013

    2013-01-01

    "DreamBox Learning" is a supplemental online mathematics program that provides adaptive instruction for students in grades K-5 and focuses on number and operations, place value, and number sense. The What Works Clearinghouse (WWC) identified one study of "DreamBox Learning" that both falls within the scope of the Elementary…

  17. Decontamination and dismantling of large plutonium-contamined glove boxes

    International Nuclear Information System (INIS)

    This report describes the work performed in the frame of two C.E.C. - Contracts FI1D-002400-B Decommissioning of very large glove boxes and FI1D-0058 Decommissioning of a complex glove box structure to be dismounted partially on place. Detailed information is given about each glove box. The selection of the solution Transportation of the glove boxes to a specialized dismantling plant is justified. The necessary contacts inside the BELGONUCLEAIRE MOX plant and between the latter and other organizations are explained. The problems of manipulating large gloves are listed and the retained solution of building a so called Stiffening frame around each glove box is described. Furthermore information is given concerning required operators time for cleaning, manipulating, packing and dismantling together with received doses and quantities of waste produced. Concerning the glove box unit partially to be dismounted on place, detailed information is given about the way the glove boxes have been treated prior to this partial dismantling on place and about the way this partial dismantling has been performed. From these results one can conclude that such a delicate task can be performed without major difficulties. Finally information is given of the decontamination test of a highly Pu contaminated glove box with freon with rather poor results and of the preliminary CO2 blasting tests on non active samples

  18. Trial-Run of a Junction-Box Attachment Test for Use in Photovoltaic Module Qualification: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Miller, D. C.; Deibert, S. L.; Wohlgemuth, J. H.

    2014-06-01

    Engineering robust adhesion of the junction box (j-box) is a hurdle typically encountered by photovoltaic module manufacturers during product development and manufacturing process control. There are historical incidences of adverse effects (e.g., fires) caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp-heat,' 'thermal-cycle,' or 'creep' tests within the IEC qualification protocol is proposed to verify the basic robustness of the adhesion system. The details of the proposed test are described, in addition to a trial-run of the test procedure. The described experiments examine four moisture-cured silicones, four foam tapes, and a hot-melt adhesive used in conjunction with glass, KPE, THV, and TPE substrates. For the purpose of validating the experiment, j-boxes were adhered to a substrate, loaded with a prescribed weight, and then subjected to aging. The replicate mock-modules were aged in an environmental chamber (at 85 degrees C/85% relative humidity for 1000 hours; then 100 degrees C/<10% relative humidity for 200 hours) or fielded in Golden (CO), Miami (FL), and Phoenix (AZ) for one year. Attachment strength tests, including pluck and shear test geometries, were also performed on smaller component specimens.

  19. Effect of inlet box on performance of axial flow fans

    Institute of Scientific and Technical Information of China (English)

    Jingyin LI; Hua TIAN; Xiaofang YUAN

    2008-01-01

    Numerical investigations on 3D flow fields in an axial flow fan with and without an inlet box have been extensively conducted, focusing on the variation of fan performance caused by the internal flow fields and the velocity evenness at the exit of the inlet box. It is interest-ing to find that although the inlet box is well designed in accordance with basic design principles, there is a flow separation region in it. Furthermore, this flow separation and the resulting uneven velocity distribution at the exit lead to some decrease in the efficiency and an increase in the total pressure rise of the fan. This research shows that the inlet box needs further improvement and such a check on the flow fields is of value for the design of inlet boxes.

  20. Aspect ratio dependence in magnetorotational instability shearing box simulations

    CERN Document Server

    Bodo, G; Cattaneo, F; Rossi, P; Ferrari, A

    2008-01-01

    Aims: We study the changes in the properties of turbulence driven by the magnetorotational instability in a shearing box, as the computational domain size in the radial direction is varied relative to the height Methods: We perform 3D simulations in the shearing box approximation, with a net magnetic flux, and we consider computational domains with different aspect ratios Results: We find that in boxes of aspect ratio unity the transport of angular momentum is strongly intermittent and dominated by channel solutions in agreement with previous work. In contrast, in boxes with larger aspect ratio, the channel solutions and the associated intermittent behavior disappear. Conclusions: There is strong evidence that, as the aspect ratio becomes larger, the characteristics of the solution become aspect ratio independent. We conclude that shearing box calculations with aspect ratio unity or near unity may introduce spurious effects.

  1. Getting started with Citrix VDI-in-a-Box

    CERN Document Server

    Brown, Stuart Arthur

    2013-01-01

    A practical and fast-paced guide that gives you all the information you need to simplify and streamline virtual desktops so you get a production-quality solution while instantly lowering your costs and improving security.Getting Started with Citrix VDI-in-a-Box is great for IT professionals who are new to VDI-in-a-Box and who are looking for a good grounding in the product. You may be planning to research VDI-in-a-Box in more detail, or you may be tasked with researching how VDI-in-a-Box could improve the productivity of your organization. No prior knowledge of VDI-in-a-Box is required, just a

  2. Grey-box modelling of pharmacokinetic/pharmacodynamic systems

    DEFF Research Database (Denmark)

    Tornøe, Christoffer Wenzel; Jacobsen, Judith L; Pedersen, Oluf;

    2004-01-01

    Grey-box pharmacokinetic/pharmacodynamic (PK/PD) modelling is presented as a promising way of modelling PK/PD systems. The concept behind grey-box modelling is based on combining physiological knowledge along with information from data in the estimation of model parameters. Grey-box modelling...... consists of using stochastic differential equations (SDEs) where the stochastic term in the differential equations represents unknown or incorrectly modelled dynamics of the system. The methodology behind the grey-box PK/PD modelling framework for systematic model improvement is illustrated using simulated...... data and furthermore applied to Bergman's minimal model of glucose kinetics using clinical data from an intravenous glucose tolerance test (IVGTT). The grey-box estimates of the stochastic system noise parameters indicate that the glucose minimal model is too simple and should preferably be revised...

  3. IEA Common Exercise 4: ARX, ARMAX and grey-box models for thermal performance characterization of the test box

    DEFF Research Database (Denmark)

    Bacher, Peder; Andersen, Philip Hvidthøft Delff

    In this report results of applying time series models for assessing the thermal performance of the IEA Annex 58 test box based on data given in the Common Exercise 4 (CE4), which was measured in Almeria, Spain. Both ARX, ARMAX and grey-box models are applied. Finally, the same models are fitted...

  4. The Experiment

    Science.gov (United States)

    Mariana Nicoara, Floare

    2016-04-01

    My name is Nicoara Floarea and I am teacher at Secondary School Calatele and I teach students from preparatory class and the second grade . They are six-eight years old. In my activity, for introducing scientific concepts to my students, I use various and active methods or traditional methods including experiments. The experiment stimulates students' curiosity, their creativity, the understanding and knowledge taught accessibility. I propose you two such experiments: The life cycle of the plants (long-term experiment, with rigorous observation time):We use beans, wheat or other; They are grown in pots and on the cotton soaked with water,keeping under students' observation protecting them ( just soak them regularly) and we waiting the plants rise. For discussions and comments of plant embryo development we use the plants which rose on the cotton soaked with water plants at the end of the first week. Last school year we had in the pot climbing beans which in May made pods. They were not too great but our experiment was a success. The students could deduce that there will develop those big beans which after drying will be planted again. The influence of light on plants (average duration experiment with the necessary observation time): We use two pots in which plants are of the same type (two geraniums), one of them is situated so as to get direct sunlight and other plant we put in a closed box. Although we wet both plants after a week we see that the plant that benefited from sunlight has turned strain in direct sunlight, developing normally in return the plant out of the box I have yellowed leaves, photosynthesis does not She has occurred . Students will understand the vital role of the Sun in plants' life, both in the classroom and in nature. The experiment is a method of teaching students extremely pleasant, with a remarkable percentage of acquiring more knowledge.

  5. Study in the design and manufacture process of the elastic cable anchor box in steel box girder of Taizhou Bridge

    Institute of Scientific and Technical Information of China (English)

    Gu Bifeng; Chen Ce; Ding Lei

    2011-01-01

    Taizhou Yangtze River Highway Bridge is a large span suspension bridge with three pylons. The elastic cables are installed to connect the steel tower and the steel box girder. The constraints can increase the safety coefficient of the middle saddle, and improve the stress conditions of the middle pylon and decrease the deflection in the middle of the main girder, as well as the longitudinal displacement of the main girder caused by live loads. The anchorage boxes of the elastic cable are installed in the wind fairing outside the vertical web plate of the box girder. Two anchor boxes form a pair and are arranged parallelly. Eight anchor boxes are installed in the bridge. In this paper, the design scheme and the technical difficulties in manufacturing are briefly discussed with the precision control techniques.

  6. Sufficient Descent Polak-Ribière-Polyak Conjugate Gradient Algorithm for Large-Scale Box-Constrained Optimization

    Directory of Open Access Journals (Sweden)

    Qiuyu Wang

    2014-01-01

    descent method at first finite number of steps and then by conjugate gradient method subsequently. Under some appropriate conditions, we show that the algorithm converges globally. Numerical experiments and comparisons by using some box-constrained problems from CUTEr library are reported. Numerical comparisons illustrate that the proposed method is promising and competitive with the well-known method—L-BFGS-B.

  7. Technology integration box beam failure study

    Science.gov (United States)

    Shuart, M. J.; Ambur, Damodar R.; Davis, D. D., Jr.; Davis, R. C.; Farley, G. L.; Lotts, C. G.; Wang, J. T.

    1993-01-01

    Composite structures have the potential to be cost-effective, structurally efficient primary aircraft structures. The Advanced Composites Technology (ACT) Program has the goal to develop the technology to exploit this potential for heavily loaded aircraft structures. As part of the ACT Program, Lockheed Aeronautical Systems Company completed the design and fabrication of the Technology Integration Box Beam (TIBB). The TIBB is an advanced composite prototype structure for the center wing section of the C-130 aircraft. Lockheed subjected the TIBB to downbending, upbending, torsion and combined upbending and torsion load conditions to verify the design. The TIBB failed at 83 percent of design ultimate load for the combined upbending and torsion load condition. The objective of this paper is to describe the mechanisms that led to the failure of the TIBB. The results of a comprehensive analytical and experimental study are presented. Analytical results include strain and deflection results from both a global analysis of the TIBB and a local analysis of the failure region. These analytical results are validated by experimental results from the TIBB tests. The analytical and experimental results from the TIBB tests are used to determine a sequence of events that resulted in failure of the TIBB. A potential cause of failure is high stresses in a stiffener runout region. Analytical and experimental results are also presented for a stiffener runout specimen that was used to simulate the TIBB failure mechanisms.

  8. On (2,3)-agreeable Box Societies

    CERN Document Server

    Abrahams, Michael; Zell, Thierry

    2009-01-01

    The notion of $(k,m)$-agreeable society was introduced by Deborah Berg et al.: a family of convex subsets of $\\R^d$ is called $(k,m)$-agreeable if any subfamily of size $m$ contains at least one non-empty $k$-fold intersection. In that paper, the $(k,m)$-agreeability of a convex family was shown to imply the existence of a subfamily of size $\\beta n$ with non-empty intersection, where $n$ is the size of the original family and $\\beta\\in[0,1]$ is an explicit constant depending only on $k,m$ and $d$. The quantity $\\beta(k,m,d)$ is called the minimal \\emph{agreement proportion} for a $(k,m)$-agreeable family in $\\R^d$. If we only assume that the sets are convex, simple examples show that $\\beta=0$ for $(k,m)$-agreeable families in $\\R^d$ where $kboxes, i.e. cuboids with sides parallel to the coordinates hyperplanes. We derive explicit formulas for the first non-trivial case: the case...

  9. Opening up a Colourful Cosmic Jewel Box

    Science.gov (United States)

    2009-10-01

    The combination of images taken by three exceptional telescopes, the ESO Very Large Telescope on Cerro Paranal , the MPG/ESO 2.2-metre telescope at ESO's La Silla observatory and the NASA/ESA Hubble Space Telescope, has allowed the stunning Jewel Box star cluster to be seen in a whole new light. Star clusters are among the most visually alluring and astrophysically fascinating objects in the sky. One of the most spectacular nestles deep in the southern skies near the Southern Cross in the constellation of Crux. The Kappa Crucis Cluster, also known as NGC 4755 or simply the "Jewel Box" is just bright enough to be seen with the unaided eye. It was given its nickname by the English astronomer John Herschel in the 1830s because the striking colour contrasts of its pale blue and orange stars seen through a telescope reminded Herschel of a piece of exotic jewellery. Open clusters [1] such as NGC 4755 typically contain anything from a few to thousands of stars that are loosely bound together by gravity. Because the stars all formed together from the same cloud of gas and dust their ages and chemical makeup are similar, which makes them ideal laboratories for studying how stars evolve. The position of the cluster amongst the rich star fields and dust clouds of the southern Milky Way is shown in the very wide field view generated from the Digitized Sky Survey 2 data. This image also includes one of the stars of the Southern Cross as well as part of the huge dark cloud of the Coal Sack [2]. A new image taken with the Wide Field Imager (WFI) on the MPG/ESO 2.2-metre telescope at ESO's La Silla Observatory in Chile shows the cluster and its rich surroundings in all their multicoloured glory. The large field of view of the WFI shows a vast number of stars. Many are located behind the dusty clouds of the Milky Way and therefore appear red [3]. The FORS1 instrument on the ESO Very Large Telescope (VLT) allows a much closer look at the cluster itself. The telescope's huge mirror

  10. SUPERSTITIOUS BEHAVIOR AMONG JUDO, TAEKWONDO AND BOXING PLAYERS

    Directory of Open Access Journals (Sweden)

    Gaurav Dureja

    2016-04-01

    Full Text Available Purpose: The present study was designed to measure superstitious behavior among Judo, Taekwondo and Boxing players. Material: Thirty (N=30 male inter-college level players with the age group of 19-25 years were selected through purposive sampling technique to act as subjects from affiliated colleges of Panjab University, Chandigarh. They were further divided into three groups: Group-A [Judo (n=10], Group-B [Taekwondo (n=10] and Group-C [Boxing (n=10]. One Way Analysis of Variance (ANOVA was applied to find out the differences among judo, taekwondo and boxing players. Where ‘F’ values found significant, Least Significant Differences (LSD Post-hoc test was applied to find out the direction and degree of difference. Results: The level of significance was set at 0.05. The result revealed significant differences among judo, taekwondo and boxing players on the sub parameters: clothing and appearance, preparation, team ritual and coach. However, no significant differences have been observed on the sub-parameters fetish, game/competition, prayer and parameter superstitious (Total. Conclusions: The obtained results showed significant differences on the sub-parameter Coach among Judo, Taekwondo and Boxing players. While calculating the mean values of entire groups, it has been observed that Boxing players demonstrate significantly better on the sub-parameter Coach. Therefore, it can be ascertained that Boxing players are more confident that coach bring a lucky charm to our game.

  11. Probability boxes on totally preordered spaces for multivariate modelling

    CERN Document Server

    Troffaes, Matthias C M; 10.1016/j.ijar.2011.02.001

    2011-01-01

    A pair of lower and upper cumulative distribution functions, also called probability box or p-box, is among the most popular models used in imprecise probability theory. They arise naturally in expert elicitation, for instance in cases where bounds are specified on the quantiles of a random variable, or when quantiles are specified only at a finite number of points. Many practical and formal results concerning p-boxes already exist in the literature. In this paper, we provide new efficient tools to construct multivariate p-boxes and develop algorithms to draw inferences from them. For this purpose, we formalise and extend the theory of p-boxes using Walley's behavioural theory of imprecise probabilities, and heavily rely on its notion of natural extension and existing results about independence modeling. In particular, we allow p-boxes to be defined on arbitrary totally preordered spaces, hence thereby also admitting multivariate p-boxes via probability bounds over any collection of nested sets. We focus on t...

  12. Measure Guideline: Optimizing the Configuration of Flexible Duct Junction Boxes

    Energy Technology Data Exchange (ETDEWEB)

    Beach, R.; Burdick, A.

    2014-03-01

    This measure guideline offers additional recommendations to heating, ventilation, and air conditioning (HVAC) system designers for optimizing flexible duct, constant-volume HVAC systems using junction boxes within Air Conditioning Contractors of America (ACCA) Manual D guidance (Rutkowski, H. Manual D -- Residential Duct Systems, 3rd edition, Version 1.00. Arlington, VA: Air Conditioning Contractors of America, 2009.). IBACOS used computational fluid dynamics software to explore and develop guidance to better control the airflow effects of factors that may impact pressure losses within junction boxes among various design configurations (Beach, R., Prahl, D., and Lange, R. CFD Analysis of Flexible Duct Junction Box Design. Golden, CO: National Renewable Energy Laboratory, submitted for publication 2013). These recommendations can help to ensure that a system aligns more closely with the design and the occupants' comfort expectations. Specifically, the recommendations described herein show how to configure a rectangular box with four outlets, a triangular box with three outlets, metal wyes with two outlets, and multiple configurations for more than four outlets. Designers of HVAC systems, contractors who are fabricating junction boxes on site, and anyone using the ACCA Manual D process for sizing duct runs will find this measure guideline invaluable for more accurately minimizing pressure losses when using junction boxes with flexible ducts.

  13. Box Energy: rental of energy-storage systems and alternative fuel technologies for vehicles; Box-energy. Rental of energy. Storage systems and alternative-fuel. Technologies for vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Bautz, R.

    2004-07-01

    This report for the Swiss Federal Office of Energy (SFOE) presents the results of study on the rental of energy-storage systems and alternative fuel technologies for vehicles. Experience gained in the area of battery-rental is discussed. The aims of the 'Box Energy' project are described, as is its market environment. The 'Box Energy' concept is described and possible customers and partners listed. Logistics aspects are discussed. The organisation of 'Box Energy' is described and the concept's chances and weaknesses are discussed. The launching of a pilot project in Switzerland is discussed. Recommendations on further work to be done are made.

  14. 超大跨径单向预应力UHPC连续箱梁桥概念设计与初步实验%Conceptual design and preliminary experiment of super-long-span continuous box-girder bridge composed of one-way prestressed UHPC

    Institute of Scientific and Technical Information of China (English)

    邵旭东; 詹豪; 雷薇; 张哲

    2013-01-01

    A novel super-long-span continuous box-girder bridge made from ultra-high-performance concrete (UHPC) was proposed.By combining UHPC,thin-walled box girder with dense diaphragm plates and partial external prestressing into the novel box-girder system,a traditional three-dimensional prestressed structure is transformed into a longitudinal one-way prestressed one.Hence,not only can the main span length of girder bridges be improved,but also the ever existing problems in long-span PC bridges,such as the cracking in concrete girders and the excessive deflection at midspan,may be eliminated.A trial-design for a continuous box-girder bridge built from UHPC with main span length of 400m is presented,and the results show that the thicknesses of its components can be decreased greatly,the transverse stress decreased effectively by using the dense diaphragms,and the self-weight of superstructure may be reduced about 50% so that a good economy may be achieved and the one-way prestressed structure is completely feasible.The model tests were carried out to evaluate the creep deformation and shear capability of UHPC beam,and the results show that the creep deformation of UHPC beam is only 20% of that of ordinary concrete beam,and the shear capability of web can be further enhanced by employing dense diaphragms.The novel super-long-span continuous box-girder bridge is a competitive candidate in the aspects of safety,economy and durability,implying that it is applicable to the continuous girder bridge with main span length of 400m.%提出一种超大跨径超高性能混凝土(UHPC)连续箱梁桥新体系.新体系梁桥将超高性能混凝土(UHPC)、密集横隔板薄壁箱梁和部分体外预应力有机结合,变传统三向预应力为纵向单向预应力结构,不仅提升了梁桥跨径,而且可消除传统大跨径PC梁桥的主梁过度下挠和梁体开裂两类病害,通过对跨径400m的UHPC连续箱梁桥试设计,结果表明,新体系箱梁桥各种板件

  15. Reliability Based Optimum Design of a Gear Box

    OpenAIRE

    D.MADHUSEKHAR; DR.K. MADHAVA REDDY

    2014-01-01

    The gear box represents an important mechanical sub system. In machine tools, the propose of a gear box is to provide a series of useful output speeds so that the machining operation can be carried out at its most optimum operating conditions high spindle speeds with low feed rate for roughing operations. An important aspect in the design of machine tool transmission is to keep the cost and volume of the gear box to a minimum. The probabilistic approach to design has been considered to be mor...

  16. Security of the AES with a Secret S-Box

    DEFF Research Database (Denmark)

    Tiessen, Tyge; Knudsen, Lars Ramkilde; Kölbl, Stefan;

    2015-01-01

    How does the security of the AES change when the S-box is replaced by a secret S-box, about which the adversary has no knowledge? Would it be safe to reduce the number of encryption rounds? In this paper, we demonstrate attacks based on integral cryptanalysis which allow to recover both the secret...... key and the secret S-box for respectively four, five, and six rounds of the AES. Despite the significantly larger amount of secret information which an adversary needs to recover, the attacks are very efficient with time/data complexities of 217/216, 238/240 and 290/264, respectively. Another...

  17. Monotone projected gradient methods for large-scale box-constrained quadratic programming

    Institute of Scientific and Technical Information of China (English)

    ZHOU Bin; GAO Li; DAI Yuhong

    2006-01-01

    Inspired by the success of the projected Barzilai-Borwein (PBB) method for largescale box-constrained quadratic programming, we propose and analyze the monotone projected gradient methods in this paper. We show by experiments and analyses that for the new methods,it is generally a bad option to compute steplengths based on the negative gradients. Thus in our algorithms, some continuous or discontinuous projected gradients are used instead to compute the steplengths. Numerical experiments on a wide variety of test problems are presented, indicating that the new methods usually outperform the PBB method.

  18. Thermal design and tests for the CMS HCAL readout box

    CERN Document Server

    Baumbaugh, B; Booke, M; Karmgard, D; Los, S; Lu, Q; Marchant, J; Reidy, J; Ronzhin, A; Ruchti, R C; Wiand, D

    2000-01-01

    A method is necessary to cool the electronics contained in the readout boxes for the CMS HCAL. The electronics to pre-amplify and digitize signals from the optical detectors will generate a large amount of heat that must be removed from the CMS HCAL system. To accomplish this a thermal management system has been designed that uses metallic extrusions, liquid coolant, and thermal foam to transfer the heat from the electronics to the exterior cooling system. Because the electronics are difficult to access throughout the life of the experiment, the temperature must be kept low to extend life expectancy. In order to test the concepts before the final design is implemented a thermal test station was built. Several methods to are under study to determine the best method of making the thermal routing from source of the heat to the liquid for heat removal. The test bed for this evaluation and methods to monitor the electronics temperature in situ will be discussed. 3 Refs.

  19. Velarium control and visual steering in box jellyfish.

    Science.gov (United States)

    Petie, Ronald; Garm, Anders; Nilsson, Dan-Eric

    2013-04-01

    Directional swimming in the box jellyfish Tripedalia cystophora (cubozoa, cnidaria) is controlled by the shape of the velarium, which is a thin muscular sheet that forms the opening of the bell. It was unclear how different patterns of visual stimulation control directional swimming and that is the focus of this study. Jellyfish were tethered inside a small experimental tank, where the four vertical walls formed light panels. All four panels were lit at the start of an experiment. The shape of the opening in the velarium was recorded in response to switching off different combinations of panels. We found that under the experimental conditions the opening in the velarium assumed three distinct shapes during a swim contraction. The opening was (1) centred or it was off-centred and pocketed out either towards (2) a rhopalium or (3) a pedalium. The shape of the opening in the velarium followed the direction of the stimulus as long as the stimulus contained directional information. When the stimulus contained no directional information, the percentage of centred pulses increased and the shape of the off-centred pulses had a random orientation. Removing one rhopalium did not change the directional response of the animals, however, the number of centred pulses increased. When three rhopalia were removed, the percentage of centred pulses increased even further and the animals lost their ability to respond to directional information. PMID:23417442

  20. Does box model training improve surgical dexterity and economy of movement during virtual reality laparoscopy? A randomised trial

    DEFF Research Database (Denmark)

    Clevin, L.; Grantcharov, T.P.

    2008-01-01

    OBJECTIVE: Laparoscopic box model trainers have been used in training curricula for a long time, however data on their impact on skills acquisition is still limited. Our aim was to validate a low cost box model trainer as a tool for the training of skills relevant to laparoscopic surgery. DESIGN......: Randomised, controlled trial (Canadian Task Force Classification I). SETTING: University Hospital. MEASUREMENTS AND MAIN RESULTS: Sixteen gynaecologic residents with limited laparoscopic experience were randomised to a group that received a structured box model training curriculum, and a control group....... Performance before and after the training was assessed in a virtual reality laparoscopic trainer (LapSim and was based on objective parameters, registered by the computer system (time, error, and economy of motion scores). Group A showed significantly greater improvement in all performance parameters compared...

  1. The AirQuality SenseBox

    Science.gov (United States)

    Demuth, Dustin; Nuest, Daniel; Bröring, Arne; Pebesma, Edzer

    2013-04-01

    In the past year, a group of open hardware enthusiasts and citizen scientists had large success in the crowd-funding of an open hardware-based sensor platform for air quality monitoring, called the Air Quality Egg. Via the kickstarter platform, the group was able to collect triple the amount of money than needed to fulfill their goals. Data generated by the Air Quality Egg is pushed to the data logging platform cosm.com, which makes the devices a part of the Internet of Things. The project aims at increasing the participation of citizens in the collection of data, the development of sensors, the operation of sensor stations, and, as data on cosm is publicly available, the sharing, visualization and analysis of data. Air Quality Eggs can measure NO2 and CO concentrations, as well as relative humidity and temperature. The chosen sensors are low-cost and have limited precision and accurracy. The Air Quality Egg consists of a stationary outdoor and a stationary indoor unit. Each outdoor unit will wirelessly transmit air quality measurements to the indoor unit, which forwards the data to cosm. Most recent versions of the Air Quality Egg allow a rough calibration of the gas sensors and on-the-fly conversion from raw sensor readings (impedance) to meaningful air quality data expressed in units of parts per billion. Data generated by these low-cost platforms are not intended to replace well-calibrated official monitoring stations, but rather augment the density of the total monitoring network with citizen sensors. To improve the usability of the Air Quality Egg, we present a new and more advanced concept, called the AirQuality SenseBox. We made the outdoor platform more autonomous and location-aware by adding solarpanels and rechargeable batteries as a power source. The AirQuality SenseBox knows its own position from a GPS device attached to the platform. As a mobile sensor platform, it can for instance be attached to vehicles. A low-cost and low-power wireless chipset

  2. GREEN SUPERCOMPUTING IN A DESKTOP BOX

    Energy Technology Data Exchange (ETDEWEB)

    HSU, CHUNG-HSING [Los Alamos National Laboratory; FENG, WU-CHUN [NON LANL; CHING, AVERY [NON LANL

    2007-01-17

    The computer workstation, introduced by Sun Microsystems in 1982, was the tool of choice for scientists and engineers as an interactive computing environment for the development of scientific codes. However, by the mid-1990s, the performance of workstations began to lag behind high-end commodity PCs. This, coupled with the disappearance of BSD-based operating systems in workstations and the emergence of Linux as an open-source operating system for PCs, arguably led to the demise of the workstation as we knew it. Around the same time, computational scientists started to leverage PCs running Linux to create a commodity-based (Beowulf) cluster that provided dedicated computer cycles, i.e., supercomputing for the rest of us, as a cost-effective alternative to large supercomputers, i.e., supercomputing for the few. However, as the cluster movement has matured, with respect to cluster hardware and open-source software, these clusters have become much more like their large-scale supercomputing brethren - a shared (and power-hungry) datacenter resource that must reside in a machine-cooled room in order to operate properly. Consequently, the above observations, when coupled with the ever-increasing performance gap between the PC and cluster supercomputer, provide the motivation for a 'green' desktop supercomputer - a turnkey solution that provides an interactive and parallel computing environment with the approximate form factor of a Sun SPARCstation 1 'pizza box' workstation. In this paper, they present the hardware and software architecture of such a solution as well as its prowess as a developmental platform for parallel codes. In short, imagine a 12-node personal desktop supercomputer that achieves 14 Gflops on Linpack but sips only 185 watts of power at load, resulting in a performance-power ratio that is over 300% better than their reference SMP platform.

  3. Necropsy Report - Eaastern Pipistrelle Box Culvert I-55 Grenada, MS

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Necropsy report of a eastern pipisttrelle tricolored bat found dead in a box culvert along I55, near Grenada, MS provides no indication of whitenose syndrome.

  4. Experts’ Misinterpretation of Box Plots – a Dual Processing Approach

    Directory of Open Access Journals (Sweden)

    Stephanie Lem

    2014-11-01

    Full Text Available Recent studies have shown that students often misinterpret the area of the box in box plots as representing the frequency or proportion of observations in that interval, while it actually represents density. This misinterpretation has been shown to be based on the saliency of this area and can be explained by heuristic reasoning as defined by dual process theories. In this study we tested whether expert users of box plots also display this misinterpretation and show signs of the same heuristic reasoning as found in students. Using a reaction time test, we found signs of heuristic reasoning in experts, both with respect to accuracy and reaction times. If even experts have difficulty interpreting box plots, one can question whether these are an appropriate form of representation to use when reporting data and deserve the prominent place they currently have in the statistics curriculum.

  5. Matter-wave dark solitons in box-like traps

    CERN Document Server

    Sciacca, M; Parker, N G

    2016-01-01

    Motivated by the experimental development of quasi-homogeneous Bose-Einstein condensates confined in box-like traps, we study numerically the dynamics of dark solitons in such traps at zero temperature. We consider the cases where the side walls of the box potential rise either as a power-law or a Gaussian. While the soliton propagates through the homogeneous interior of the box without dissipation, it typically dissipates energy during a reflection from a wall through the emission of sound waves, causing a slight increase in the soliton's speed. We characterise this energy loss as a function of the wall parameters. Moreover, over multiple oscillations and reflections in the box-like trap, the energy loss and speed increase of the soliton can be significant, although the decay eventually becomes stabilized when the soliton equilibrates with the ambient sound field.

  6. BoxLib with Tiling: An AMR Software Framework

    CERN Document Server

    Zhang, Weiqun; Day, Marcus; Nguyen, Tan; Shalf, John; Unat, Didem

    2016-01-01

    In this paper we introduce a block-structured adaptive mesh refinement (AMR) software framework that incorporates tiling, a well-known loop transformation. Because the multiscale, multiphysics codes built in BoxLib are designed to solve complex systems at high resolution, performance on current and next generation architectures is essential. With the expectation of many more cores per node on next generation architectures, the ability to effectively utilize threads within a node is essential, and the current model for parallelization will not be sufficient. We describe a new version of BoxLib in which the tiling constructs are embedded so that BoxLib-based applications can easily realize expected performance gains without extra effort on the part of the application developer. We also discuss a path forward to enable future versions of BoxLib to take advantage of NUMA-aware optimizations using the TiDA portable library.

  7. Fusion welded fabrication of unshielded steel glove boxes

    International Nuclear Information System (INIS)

    This part of the Specification together with Part 1 covers the manufacture, testing, inspection and delivery of stainless steel glove boxes including such fittings internally and externally as shown on relevant drawings. (author)

  8. Fusion welded fabrication of unshielded steel glove boxes

    International Nuclear Information System (INIS)

    This Specification deals with the manufacture, testing, inspection and delivery of fabricated glove boxes, including such internal and/or external fittings as are shown on the relevant drawings. (author)

  9. Immunohistochemical evidence for multiple photosystems in box jellyfish

    DEFF Research Database (Denmark)

    Ekström, Peter; Garm, Anders Lydik; Pålsson, Jonas;

    2008-01-01

    Cubomedusae (box jellyfish) possess a remarkable visual system with 24 eyes distributed in four sensory structures termed rhopalia. Each rhopalium is equipped with six eyes: two pairs of pigment cup eyes and two unpaired lens eyes. Each eye type probably captures specific features of the visual......, and electroretinograms (ERG) to determine their spectral sensitivity. All photoreceptor cells of the two lens eyes of the box jellyfish Tripedalia cystophora and Carybdea marsupialis displayed immunoreactivity for an antibody directed against the zebrafish ultraviolet (UV) opsin, but not against any of eight other...... data demonstrate that the lens eyes of box jellyfish utilize a single opsin and are thus color-blind, and that there is probably a different photopigment in the pigment cup eyes. The results support our hypothesis that the lens eyes and the pigment cup eyes of box jellyfish are involved in different...

  10. Sizing Procedures for a Fibre Reinforced Plastic Box

    Directory of Open Access Journals (Sweden)

    K. Kamal

    1992-10-01

    Full Text Available A fibre-reinforced plastic (FRP box is an important class of structural component employed as the bending, torsion, or bending-torsion load bearing member in the modern light- weight structures. This paper presents various steps involved in the design of such a box beginning with preliminary analysis and optimization to the final sizing. The box made up of carbon fibre composite is a typical numerical example of such FRP construction. Numerical results obtained from the static stress analysis, the panel buckling analysis and the structural optimization as used for this sizing exercise, are presented. It is believed that the complete procedure of analysis using finite element method and then sizing of any FRP box in a comprehensive way, is reported for the first time.

  11. Maximal unitarity for the four-mass double box

    OpenAIRE

    Johansson, Henrik; Kosower, David A.; Larsen, Kasper J.

    2014-01-01

    We extend the maximal-unitarity formalism at two loops to double-box integrals with four massive external legs. These are relevant for higher-point processes, as well as for heavy vector rescattering, VV -> VV. In this formalism, the two-loop amplitude is expanded over a basis of integrals. We obtain formulas for the coefficients of the double-box integrals, expressing them as products of tree-level amplitudes integrated over specific complex multidimensional contours. The contours are subjec...

  12. Gray-box modelling approach for description of storage tunnel

    DEFF Research Database (Denmark)

    Harremoës, Poul; Carstensen, Jacob

    1999-01-01

    The dynamics of a storage tunnel is examined using a model based on on-line measured data and a combination of simple deterministic and black-box stochastic elements. This approach, called gray-box modeling, is a new promising methodology for giving an on-line state description of sewer systems. ...... in a SCADA system because the most important information on the specific system is provided on-line...

  13. SOME RECURRENCE FORMULAS FOR BOX SPLINES AND CONE SPLINES

    Institute of Scientific and Technical Information of China (English)

    Patrick J. Van Fleet

    2004-01-01

    A degree elevation formula for multivariate simplex splines was given by Micchelli[6] and extended to hold for multivariate Dirichlet splines in [8]. We report similar formulae for multivariate cone splines and box splines. To this end, we utilize a relation due to Dahmen and Micchelli[4] that connects box splines and cone splines and a degree reduction formula given by Cohen, Lyche, and Riesenfeld in [2].

  14. SOME RECURRENCE FORMULAS FOR BOX SPLINES AND CONE SPLINES

    Institute of Scientific and Technical Information of China (English)

    Patrick J. Van Fleet

    2002-01-01

    A degree elevation formula for multivariate simplex splines was given by Micchelli [6] and extended to hold for multivariate Dirichlet splines in [8]. We report similar formulae for multivariate cone splines and box_splines. To this end, we utilize a relation due to Dahmen and Micchelli [4] that connects box splines and cone splines and a degree reduction formula given by Cohen, Lyche, and Riesenfeld in [2].

  15. Reliability Based Optimum Design of a Gear Box

    Directory of Open Access Journals (Sweden)

    D.Madhusekhar

    2014-10-01

    Full Text Available The gear box represents an important mechanical sub system. In machine tools, the propose of a gear box is to provide a series of useful output speeds so that the machining operation can be carried out at its most optimum operating conditions high spindle speeds with low feed rate for roughing operations. An important aspect in the design of machine tool transmission is to keep the cost and volume of the gear box to a minimum. The probabilistic approach to design has been considered to be more rational compared to the conventional design approach based on the factor of safety. The existence of uncertainties in either engineering simulations or manufacturing processes calls for a reliability-based design optimization (RBDO model for robust and cost-effective designs. In the present work a three shaft four speed gear box is designed using reliability principles. For the specified reliability of the system (Gear box, component reliability (Gear pair is calculated by considering the system as a series system. Design is considered to be safe and adequate if the probability of failure of gear box is less than or equal to a specified quantity in each of the two failure modes. A FORTRAN program has been developed to calculate the mean values of face widths of gears for the minimum mass of gear box. By changing the probability of failure of system variations in the face widths are studied. The reliability based optimum design results are compared with those obtained by deterministic optimum design. The minimum mass of the gear box is increase as the specified values of the reliability is increased.

  16. Jewelry boxes contaminated by Aspergillus oryzae: an occupational health risk?

    Science.gov (United States)

    Bellanger, Anne-Pauline; Roussel, Anaïs; Millon, Laurence; Delaforge, Marcel; Reboux, Gabriel

    2012-01-01

    In 2009, 100,000 jewelry boxes, manufactured in China, were delivered to a jewelry manufacturer in Besançon, France. All the boxes were contaminated by mold. Because the workers refused to handle these jewelry boxes, the company contacted our laboratory to determine how to deal with the problem. Three choices were available: (1) decontaminate the boxes, (2) return the boxes to the Chinese manufacturer, or (3) destroy the entire shipment. Based on microscopic identification, the culture analysis was positive for A. oryzae. This could not be confirmed by molecular techniques because of the genetic proximity of A. oryzae and A. flavus. Because A. flavus can produce aflatoxins, we tested for them using mass spectrometry. Aflatoxins B1, B2, G1, G2, and M1 were not detected; however, given the specifics of this situation, we could not discard the possibility of the presence of other aflatoxins, such as P1, B3, GM2, and ethoxyaflatoxin B2. We concluded that the contamination by A. oryzae was probably due to food products. However, because of the possible presence of aflatoxins, occupational health risks could not be entirely ruled out. The decision was therefore taken to destroy all the jewelry boxes by incineration. To avoid a similar situation we propose: (1) to maintain conditions limiting mold contamination during production (not eating on the work site, efficient ventilation systems); (2) to desiccate the products before sending them; and (3) to closely control the levels of dampness during storage and transport.

  17. Unconventional Bearing Capacity Analysis and Optimization of Multicell Box Girders

    Directory of Open Access Journals (Sweden)

    Jovan Tepic

    2014-01-01

    Full Text Available This study deals with unconventional bearing capacity analysis and the procedure of optimizing a two-cell box girder. The generalized model which enables the local stress-strain analysis of multicell girders was developed based on the principle of cross-sectional decomposition. The applied methodology is verified using the experimental data (Djelosevic et al., 2012 for traditionally formed box girders. The qualitative and quantitative evaluation of results obtained for the two-cell box girder is realized based on comparative analysis using the finite element method (FEM and the ANSYS v12 software. The deflection function obtained by analytical and numerical methods was found consistent provided that the maximum deviation does not exceed 4%. Multicell box girders are rationally designed support structures characterized by much lower susceptibility of their cross-sectional elements to buckling and higher specific capacity than traditionally formed box girders. The developed local stress model is applied for optimizing the cross section of a two-cell box carrier. The author points to the advantages of implementing the model of local stresses in the optimization process and concludes that the technological reserve of bearing capacity amounts to 20% at the same girder weight and constant load conditions.

  18. Ultra-low power S-Boxes architecture for AES

    Institute of Scientific and Technical Information of China (English)

    XING Ji-peng; ZOU Xue-cheng; GUO Xu

    2008-01-01

    It is crucial to design energy-efficient advancedcncryption standard (AES) cryptography for low power embeddedsystems powered by limited battery. Since the S-Boxes consumemuch of the total AES circuit power, an efficient approach toreducing the AES power consumption consists in reducing theS-Boxes power consumption. Among various implementationsof S-Boxes, the most energy-efficient one is the decoder-switch-encoder (DSE) architecture. In this paper, we refine the DSEarchitecture and propose one faster, more compact S-Boxesarchitecture of lower power: an improved and full-balanced DSEarchitecture. This architecture achieves low power consumptionof 68 μW at 10 MHz using 0.25 μm 1.8V UMC CMOStechnology. Compared with the original DSE S-Boxes, it furtherreduces the delay, gate count and power consumption by 8%,14% and 10% respectively. At the sane time, simulation resultsshow that the improved DSE S-Boxes has the best performanceamong various S-Boxes architectures in terms of power-areaproduct and power-delay product, and it is optimal forimplementing low power AES cryptography.

  19. Measure Guideline: Optimizing the Configuration of Flexible Duct Junction Boxes

    Energy Technology Data Exchange (ETDEWEB)

    Beach, R. [IBACOS, Inc., Pittsburgh, PA (United States); Burdick, A. [IBACOS, Inc., Pittsburgh, PA (United States)

    2014-03-01

    This measure guideline offers additional recommendations to heating, ventilation, and air conditioning (HVAC) system designers for optimizing flexible duct, constant-volume HVAC systems using junction boxes within Air Conditioning Contractors of America (ACCA) Manual D guidance. IBACOS used computational fluid dynamics software to explore and develop guidance to better control the airflow effects of factors that may impact pressure losses within junction boxes among various design configurations. These recommendations can help to ensure that a system aligns more closely with the design and the occupants' comfort expectations. Specifically, the recommendations described herein show how to configure a rectangular box with four outlets, a triangular box with three outlets, metal wyes with two outlets, and multiple configurations for more than four outlets. Designers of HVAC systems, contractors who are fabricating junction boxes on site, and anyone using the ACCA Manual D process for sizing duct runs will find this measure guideline invaluable for more accurately minimizing pressure losses when using junction boxes with flexible ducts.

  20. Closure of an analytical chemistry glove box in alpha laboratory

    International Nuclear Information System (INIS)

    The works with plutonium are performed in gloves box, operated below atmospheric pressure, to protect the experimenters from this alpha-active material. After 12 years of continual processes, it was necessary the decommissioning of the chemistry glove box in our alpha-laboratory. A great deal of our attention was devoted to the working techniques because of extreme care needed to avoid activity release. The decommissioning includes the following main operations: a) Planning and documentation for the regulatory authority. b) Internal decontamination with surface cleaning and chelating agents. c) Measurement of the remainder internal radioactivity. d) Sealing of the glove ports and nozzles. e) Disconnection of the glove box from the exhaust duct. f) Design and construction of a container for the glove box. g) Transportation of the glove box from alpha-laboratory, to a transitory storage until its final disposal. The above mentioned operations are described in this paper including too: data of personal doses during the operations, characteristics and volumes of radioactive wastes and a description of the instrument used for the measurement of inside glove box activity. (Author)

  1. Performance and testing of a hot box storage solar cooker

    Energy Technology Data Exchange (ETDEWEB)

    Nahar, N.M. [Central Arid Zone Research Inst., Rajasthan (India)

    2003-05-01

    A hot box solar cooker with used engine oil as a storage material has been designed, fabricated and tested so that cooking can be performed even in the late evening. The performance and testing of a storage solar cooker have been investigated by measuring stagnation temperatures and conducting cooking trials. The maximum stagnation temperature inside the cooking chambers of the hot box solar cooker with storage material was the same as that of the hot box solar cooker without storage during the day time, but it was 23 deg C more in the storage solar cooker from 1700 to 2400 h. The efficiency of the hot box storage solar cooker has been found to be 27.5%. Cooking trials were also conducted. The rice and green gram washed split were kept at 1730 h, and these were cooked perfectly by 2000 h in the hot box storage solar cooker, while these were not cooked in the hot box solar cooker without storage. (Author)

  2. Building a Class-1 Glove Box for Use with the NIFFTE TPC

    Science.gov (United States)

    Lynn, William

    2012-10-01

    The Neutron Induced Fission Fragment Tracking Experiment (NIFFTE) uses a Time Projection Chamber (TPC) to measure the neutron-induced fission cross sections of actinides with unprecedented accuracy which will aid in the development of the next generation nuclear reactors. Charged particles, including fission fragments, create a trail of electrons within a fill gas through ionization, which then drift in an electric field towards the read-out electronics. Using a MicroMegas mesh, the signal is amplified and then detected by the TPC pad plane. Due to the delicate nature of the MicroMegas mesh, precaution must be taken to prevent damage to the mesh from airborne contaminants which can cause the mesh to short. To avoid radiological contamination, a glove box was chosen for the task of handling and installing actinide targets into the TPC. To protect the TPC electronics, a decision was made to modify the existing glove box to create a Class-1 cleanroom environment. Variables such as glove type, filter, and cleaning agent were tested independently to determine maximum cleanliness, and a procedure for creating an acceptable Class-1 environment inside the glove box for the TPC was developed.

  3. The ALDB box: automatic testing of cognitive performance in groups of aviary-housed pigeons.

    Science.gov (United States)

    Huber, Ludwig; Heise, Nils; Zeman, Christopher; Palmers, Christian

    2015-03-01

    The combination of highly controlled experimental testing and the voluntary participation of unrestrained animals has many advantages over traditional, laboratory-based learning environments in terms of animal welfare, learning speed, and resource economy. Such automatic learning environments have recently been developed for primates (Fagot & Bonté, 2010; Fagot & Paleressompoulle, 2009;) but, so far, has not been achieved with highly mobile creatures such as birds. Here, we present a novel testing environment for pigeons. Living together in small groups in outside aviaries, they can freely choose to participate in learning experiments by entering and leaving the automatic learning box at any time. At the single-access entry, they are individualized using radio frequency identification technology and then trained or tested in a stress-free and self-terminating manner. The voluntary nature of their participation according to their individual biorhythm guarantees high motivation levels and good learning and test performance. Around-the-clock access allows for massed-trials training, which in baboons has been proven to have facilitative effects on discrimination learning. The performance of 2 pigeons confirmed the advantages of the automatic learning device for birds box. The latter is the result of a development process of several years that required us to deal with and overcome a number of technical challenges: (1) mechanically controlled access to the box, (2) identification of the birds, (3) the release of a bird and, at the same time, prevention of others from entering the box, and (4) reliable functioning of the device despite long operation times and exposure to high dust loads and low temperatures.

  4. The ALDB box: automatic testing of cognitive performance in groups of aviary-housed pigeons.

    Science.gov (United States)

    Huber, Ludwig; Heise, Nils; Zeman, Christopher; Palmers, Christian

    2015-03-01

    The combination of highly controlled experimental testing and the voluntary participation of unrestrained animals has many advantages over traditional, laboratory-based learning environments in terms of animal welfare, learning speed, and resource economy. Such automatic learning environments have recently been developed for primates (Fagot & Bonté, 2010; Fagot & Paleressompoulle, 2009;) but, so far, has not been achieved with highly mobile creatures such as birds. Here, we present a novel testing environment for pigeons. Living together in small groups in outside aviaries, they can freely choose to participate in learning experiments by entering and leaving the automatic learning box at any time. At the single-access entry, they are individualized using radio frequency identification technology and then trained or tested in a stress-free and self-terminating manner. The voluntary nature of their participation according to their individual biorhythm guarantees high motivation levels and good learning and test performance. Around-the-clock access allows for massed-trials training, which in baboons has been proven to have facilitative effects on discrimination learning. The performance of 2 pigeons confirmed the advantages of the automatic learning device for birds box. The latter is the result of a development process of several years that required us to deal with and overcome a number of technical challenges: (1) mechanically controlled access to the box, (2) identification of the birds, (3) the release of a bird and, at the same time, prevention of others from entering the box, and (4) reliable functioning of the device despite long operation times and exposure to high dust loads and low temperatures. PMID:24737096

  5. A novel method to design S-box based on chaotic map and genetic algorithm

    Science.gov (United States)

    Wang, Yong; Wong, Kwok-Wo; Li, Changbing; Li, Yang

    2012-01-01

    The substitution box (S-box) is an important component in block encryption algorithms. In this Letter, the problem of constructing S-box is transformed to a Traveling Salesman Problem and a method for designing S-box based on chaos and genetic algorithm is proposed. Since the proposed method makes full use of the traits of chaotic map and evolution process, stronger S-box is obtained. The results of performance test show that the presented S-box has good cryptographic properties, which justify that the proposed algorithm is effective in generating strong S-boxes.

  6. A novel method to design S-box based on chaotic map and genetic algorithm

    International Nuclear Information System (INIS)

    The substitution box (S-box) is an important component in block encryption algorithms. In this Letter, the problem of constructing S-box is transformed to a Traveling Salesman Problem and a method for designing S-box based on chaos and genetic algorithm is proposed. Since the proposed method makes full use of the traits of chaotic map and evolution process, stronger S-box is obtained. The results of performance test show that the presented S-box has good cryptographic properties, which justify that the proposed algorithm is effective in generating strong S-boxes. -- Highlights: ► The problem of constructing S-box is transformed to a Traveling Salesman Problem. ► We present a new method for designing S-box based on chaos and genetic algorithm. ► The proposed algorithm is effective in generating strong S-boxes.

  7. A novel method to design S-box based on chaotic map and genetic algorithm

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yong, E-mail: wangyong_cqupt@163.com [State Key Laboratory of Power Transmission Equipment and System Security and New Technology, Chongqing University, Chongqing 400044 (China); Key Laboratory of Electronic Commerce and Logistics, Chongqing University of Posts and Telecommunications, Chongqing 400065 (China); Wong, Kwok-Wo [Department of Electronic Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon Tong (Hong Kong); Li, Changbing [Key Laboratory of Electronic Commerce and Logistics, Chongqing University of Posts and Telecommunications, Chongqing 400065 (China); Li, Yang [Department of Automatic Control and Systems Engineering, The University of Sheffield, Mapping Street, S1 3DJ (United Kingdom)

    2012-01-30

    The substitution box (S-box) is an important component in block encryption algorithms. In this Letter, the problem of constructing S-box is transformed to a Traveling Salesman Problem and a method for designing S-box based on chaos and genetic algorithm is proposed. Since the proposed method makes full use of the traits of chaotic map and evolution process, stronger S-box is obtained. The results of performance test show that the presented S-box has good cryptographic properties, which justify that the proposed algorithm is effective in generating strong S-boxes. -- Highlights: ► The problem of constructing S-box is transformed to a Traveling Salesman Problem. ► We present a new method for designing S-box based on chaos and genetic algorithm. ► The proposed algorithm is effective in generating strong S-boxes.

  8. Implications of Big Box Retail Location on Regional Profits, Consumer Utility, and Land Rents

    OpenAIRE

    Stater, Mark; Visser, Michael S.

    2008-01-01

    This paper uses a monocentric city model to examine the effects of big box retailing on local retail prices, land values and utility. Relative to small local retailers, the big box offers a price discount that increases in its marginal cost advantage. Big box entry reduces local retail prices and profits, but provides an increase in household utility that depends positively on the distance between the big box location and the CBD. However, big box locations are unstable with imperfectly compe...

  9. Study on the Dietary Plan of Boxing Athletes during the Period of Weight Loss

    OpenAIRE

    Bo Ma

    2015-01-01

    The study combined with the principle of reasonable weight loss for the boxing athletes by stating the overview of the boxing athlete's weight loss, as well as its influence on the function index of boxing athletes as the weight loss of boxing athletes can directly affect sports performance. It discusses the nutritional supplement measures of boxing athletes during the period of the slow and rapid weight loss stage.

  10. Study on the Dietary Plan of Boxing Athletes during the Period of Weight Loss

    Directory of Open Access Journals (Sweden)

    Bo Ma

    2015-05-01

    Full Text Available The study combined with the principle of reasonable weight loss for the boxing athletes by stating the overview of the boxing athlete's weight loss, as well as its influence on the function index of boxing athletes as the weight loss of boxing athletes can directly affect sports performance. It discusses the nutritional supplement measures of boxing athletes during the period of the slow and rapid weight loss stage.

  11. Integrated Box Interrogation System (IBIS) Preliminary Design Study

    Energy Technology Data Exchange (ETDEWEB)

    DR. Stephen Croft; Mr. David Martancik; Dr. Brian Young; Dr. Patrick MJ Chard; Dr. Robert J Estop; Sheila Melton; Gaetano J. Arnone

    2003-01-13

    Canberra Industries has won the tendered solicitation, INEEL/EST-99-00121 for boxed waste Nondestructive Assay Development and Demonstration. Canberra will provide the Integrated Box Interrogation System (IBIS) which is a suite of assay instrumentation and a data reduction system that addresses the measurement needs for Boxed Wastes identified in the solicitation and facilitates the associated experimental program and demonstration of system capability. The IBIS system will consist of the next generation CWAM system, i.e. CWAM II, which is a Scanning Passive/Active Neutron interrogation system which we will call a Box Segmented Neutron Scanner (BSNS), combined with a physically separate Box Segmented Gamma-ray Scanning (BSGS) system. These systems are based on existing hardware designs but will be tailored to the large sample size and enhanced to allow the program to evaluate the following measurement criteria:Characterization and correction for matrix heterogeneity Characterization of non-uniform radio-nuclide and isotopic compositions Assay of high density matrices (both high-Z and high moderator contents)Correction for radioactive material physical form - such as self shielding or multiplication effects due to large accumulations of radioactive materials.Calibration with a minimal set of reference standards and representative matrices.THis document summarizes the conceptual design parameters of the IBIS and indicates areas key to the success of the project where development is to be centered. The work presented here is a collaborative effort between scientific staff within Canberra and within the NIS-6 group at LANL.

  12. Integrated Box Interrogation System (IBIS) Preliminary Design Study

    International Nuclear Information System (INIS)

    Canberra Industries has won the tendered solicitation, INEEL/EST-99-00121 for boxed waste Nondestructive Assay Development and Demonstration. Canberra will provide the Integrated Box Interrogation System (IBIS) which is a suite of assay instrumentation and a data reduction system that addresses the measurement needs for Boxed Wastes identified in the solicitation and facilitates the associated experimental program and demonstration of system capability. The IBIS system will consist of the next generation CWAM system, i.e. CWAM II, which is a Scanning Passive/Active Neutron interrogation system which we will call a Box Segmented Neutron Scanner (BSNS), combined with a physically separate Box Segmented Gamma-ray Scanning (BSGS) system. These systems are based on existing hardware designs but will be tailored to the large sample size and enhanced to allow the program to evaluate the following measurement criteria:Characterization and correction for matrix heterogeneity Characterization of non-uniform radio-nuclide and isotopic compositions Assay of high density matrices (both high-Z and high moderator contents)Correction for radioactive material physical form - such as self shielding or multiplication effects due to large accumulations of radioactive materials.Calibration with a minimal set of reference standards and representative matrices.THis document summarizes the conceptual design parameters of the IBIS and indicates areas key to the success of the project where development is to be centered. The work presented here is a collaborative effort between scientific staff within Canberra and within the NIS-6 group at LANL

  13. Software sensors based on the grey-box modelling approach

    DEFF Research Database (Denmark)

    Carstensen, J.; Harremoës, P.; Strube, Rune

    1996-01-01

    -box model for the specific dynamics is identified. Similarly, an on-line software sensor for detecting the occurrence of backwater phenomena can be developed by comparing the dynamics of a flow measurement with a nearby level measurement. For treatment plants it is found that grey-box models applied to on......-line measurements. With respect to the development of software sensors, the grey-box models possess two important features. Firstly, the on-line measurements can be filtered according to the grey-box model in order to remove noise deriving from the measuring equipment and controlling devices. Secondly, the grey......-box models may contain terms which can be estimated on-line by use of the models and measurements. In this paper, it is demonstrated that many storage basins in sewer systems can be used as an on-line flow measurement provided that the basin is monitored on-line with a level transmitter and that a grey...

  14. Boxes and Sound Quality in AN Italian Opera House

    Science.gov (United States)

    COCCHI, A.; GARAI, M.; TAVERNELLI, C.

    2000-04-01

    The “Teatro Comunale” (City Theatre) in Bologna is an Italian opera house of the 18th century, designed by the famous architect Antonio Galli Bibiena. Largely built in masonry, it has been only partially restored and altered several times, but never destroyed and rebuilt. The study of its acoustics, while interesting for itself, offers the opportunity to investigate the role of the boxes, which constitute the most evident characteristic of Italian opera houses. The study was carried on at first by measurements, acquiring binaural impulse responses in the stalls and in the boxes, and then by computer simulation, modelling also some changes which cannot be done in the real hall. The measurements revealed clear differences between the listening quality in the boxes and in the stalls, especially regarding ITDG, clarity and IACC. Computer simulations show how the sound field in the historical theatre could be if the sound absorption of the boxes were changed, adding some velvet curtains, as was done in ancient times, and clarify the effects of the cavities which constitutes the boxes.

  15. Internal Behavioral Modeling of Embedded Systems through State Box Structures

    Directory of Open Access Journals (Sweden)

    V. Chandra Prakash

    2011-05-01

    Full Text Available Clean Room Software Engineering (CRSE methodology is intended for the development of high quality systems. The methodology is centered on three structures which include Black Box (BB, State Box (SB and Clear Box (CB and it assures high quality through implementation of Verification and Validation models at every stage of development. The models, suggested earlier, are built using the Mathematics for implementing the formalism which is needed to assure high quality. The mathematical way of implementing the formalism has been proved to be complex, unwieldy and impracticable. The Verification and Validation methods suggested are classical and do not support formalism which is the key element of CRSE. In this paper, three UML models and the associated algorithms have been proposed that help developing state box structures in more formal way and also to automate the process of generating State Box Structures. The refined CRSE model incorporating the suggested models is also presented. The models are used to develop the internal behavior of a Pilot Project called “Temperature Monitoring and Controlling of Nuclear Reactor System” (TMCNRS which is an embedded system designed in more formal and automated way.

  16. Computational Fluid Dynamics Analysis of Flexible Duct Junction Box Design

    Energy Technology Data Exchange (ETDEWEB)

    Beach, Robert [IBACOS, Inc., Pittsburgh, PA (United States); Prahl, Duncan [IBACOS, Inc., Pittsburgh, PA (United States); Lange, Rich [Applied Science Consultants, LLC, Pittsburgh, PA (United States)

    2013-12-01

    IBACOS explored the relationships between pressure and physical configurations of flexible duct junction boxes by using computational fluid dynamics (CFD) simulations to predict individual box parameters and total system pressure, thereby ensuring improved HVAC performance. Current Air Conditioning Contractors of America (ACCA) guidance (Group 11, Appendix 3, ACCA Manual D, Rutkowski 2009) allows for unconstrained variation in the number of takeoffs, box sizes, and takeoff locations. The only variables currently used in selecting an equivalent length (EL) are velocity of air in the duct and friction rate, given the first takeoff is located at least twice its diameter away from the inlet. This condition does not account for other factors impacting pressure loss across these types of fittings. For each simulation, the IBACOS team converted pressure loss within a box to an EL to compare variation in ACCA Manual D guidance to the simulated variation. IBACOS chose cases to represent flows reasonably correlating to flows typically encountered in the field and analyzed differences in total pressure due to increases in number and location of takeoffs, box dimensions, and velocity of air, and whether an entrance fitting is included. The team also calculated additional balancing losses for all cases due to discrepancies between intended outlet flows and natural flow splits created by the fitting. In certain asymmetrical cases, the balancing losses were significantly higher than symmetrical cases where the natural splits were close to the targets. Thus, IBACOS has shown additional design constraints that can ensure better system performance.

  17. Inferring 3D Articulated Models for Box Packaging Robot

    CERN Document Server

    Yang, Heran; Cong, Matthew; Saxena, Ashutosh

    2011-01-01

    Given a point cloud, we consider inferring kinematic models of 3D articulated objects such as boxes for the purpose of manipulating them. While previous work has shown how to extract a planar kinematic model (often represented as a linear chain), such planar models do not apply to 3D objects that are composed of segments often linked to the other segments in cyclic configurations. We present an approach for building a model that captures the relation between the input point cloud features and the object segment as well as the relation between the neighboring object segments. We use a conditional random field that allows us to model the dependencies between different segments of the object. We test our approach on inferring the kinematic structure from partial and noisy point cloud data for a wide variety of boxes including cake boxes, pizza boxes, and cardboard cartons of several sizes. The inferred structure enables our robot to successfully close these boxes by manipulating the flaps.

  18. Jack in the Box, Unit 1A

    DEFF Research Database (Denmark)

    Gammelgaard Nielsen, Anders

    2011-01-01

    and finally to pre- sentation and montage techniques. Often a course of this nature is un- fortunately very difficult to operate in practice within an architectural degree course. It is, however, abso- lutely essential for students to expe- rience the role of a practising archi- tect. In our experience...

  19. Stress and noises of steel box girders in Sutong Bridge

    Institute of Scientific and Technical Information of China (English)

    Xue Tao; Chen Zhijian; Dong Xuewu

    2008-01-01

    Sutong Bridge is a cable-stayed bridge with a main span of 1 088 m.370 high-precision stress monitoring measured data show that in the process of hoisting the steel box girders,the stress of the main girders is in the fluctuant and complex state and many meteorological factors,such as sunshine radiation,temperature and wind,have important influence on the change of stress of the steel box girders.According to the real-time weather data,the stress data after the process of wavelet denoising from representative measuring points in different weather conditions is picked to estab-lish the stress response brought by meteorological factors with Layered Separation method,thereby basically eliminating the influence of meteorological factors on the stress of main girders,so that accurate and reliable stress data can be got for steel box girders adjustment and cable-tensioned construction control.

  20. Thinking outside the box: fluctuations and finite size effects

    Science.gov (United States)

    Villamaina, Dario; Trizac, Emmanuel

    2014-05-01

    The isothermal compressibility of an interacting or non-interacting system may be extracted from the fluctuations of the number of particles in a well-chosen control volume. Finite size effects are prevalent and should be accounted for to obtain a meaningful, thermodynamic compressibility. In the traditional computational setup, where a given simulation box is replicated with periodic boundary conditions, we study particle number fluctuations outside the box (i.e. when the control volume exceeds the box itself), which bear relevant thermodynamic information. We also investigate the related problem of extracting the compressibility from the structure factor in the small wave-vector limit (k → 0). The calculation should be restricted to the discrete set of wave-vectors k that are compatible with the periodicity of the system, and we assess the consequences of considering other k values, a widespread error among beginners.

  1. A controlled experiment for water front monitoring using GPR technology

    NARCIS (Netherlands)

    Miorali, M.; Slob, E.C.; Arts, R.J.

    2010-01-01

    We use a stepped frequency continuous wave (SFCW) radar and an impulse radar to monitor a water flood experiment in a sand box. The SFCW system operates in the bandwidth from 800 MHz to 2.8 GHz. The impulse radar system is bi-static and works with a central frequency of 1 GHz. The sand box is a mete

  2. PARAMETRIC STUDY OF SKEW ANGLE ON BOX GIRDER BRIDGE DECK

    OpenAIRE

    Shrikant D. Bobade *, Dr. Valsson Varghese

    2016-01-01

    Box girder bridge deck, is the most common type of bridges in world and India, it consists of several Slab or girders. The span in the direction of the roadway and connected across their tops and bottoms by a thin continuous structural stab, the longitudinal box girders can be made of steel or concrete. The Simple supported single span concrete bridge deck is presented in present study. Skewed bridges are suitable in highway design when the geometry of straight bridges is not possible. The sk...

  3. Fermi hypernetted chain calculations in a periodic box

    International Nuclear Information System (INIS)

    The Fermi hypernetted chain theory is reformulated to perform calculations with a finite number of fermions in a periodic box. The proposed method is expected to be useful to estimate the finite size effects in Quantum Monte Carlo simulations. Moreover, it can deal with anisotropic correlations as well as with different shaped boxes. Results are given for the neutron matter Bethe homework Hamiltonian and for nuclear matter with spin-isospin dependent central interactions. It is found that finite size effects come from both the kinetic and the potential energy expectation values

  4. AN ALGORITHM FOR AUTOMATICALLY GENERATING BLACK-BOX TEST CASES

    Institute of Scientific and Technical Information of China (English)

    XuBaowen; NieChanghai; 等

    2003-01-01

    Selection of test cases plays a key role in improving testing efficiency.Black-box testing is an important way of testing,and is validity lies on the secection of test cases in some sense.A reasonable and effective method about the selection and generation of test cascs is urgently needed.This letter first introduces some usual methods on black-box test case generation,then proposes a new glgorithm based on interface parameters and discusses its properties,finally shows the effectiveness of the algorithm.

  5. AN ALGORITHM FOR AUTOMATICALLY GENERATING BLACK-BOX TEST CASES

    Institute of Scientific and Technical Information of China (English)

    Xu Baowen; Nie Changhai; Shi Qunfeng; Lu Hong

    2003-01-01

    Selection of test cases plays a key role in improving testing efficiency. Black-box testing is an important way of testing, and its validity lies on the selection of test cases in some sense. A reasonable and effective method about the selection and generation of test cases is urgently needed. This letter first introduces some usualmethods on black-box test case generation,then proposes a new algorithm based on interface parameters and discusses its properties, finally shows the effectiveness of the algorithm.

  6. Host-Guest Interactions in ExBox4+

    CERN Document Server

    Das, Ranjita

    2014-01-01

    The host-guest interaction between benzene or azine with the newly synthesized ExBox4+ complex is studied with the help of DFT. The solvent phase interaction energy is found to decrease with gradual substitution of methine group of guest benzene ring with N atom in the resultant azine@ExBox4+ complex. The nature of bonding interaction is studied with the help of newly developed NCI plot program package along with energy decomposition analysis (EDA) and charge decomposition analysis (CDA). The interaction is mostly pi-type van der Waals interaction.

  7. Tests of CMS Hadron Forward Calorimeter Upgrade Readout Box Prototype

    CERN Document Server

    Chatrchyan, Sergey; Sirunyan, Albert; Tumasyan, Armen; Mossolov, Vladimir; Shumeiko, Nikolai; Cornelis, Tom; Ochesanu, Silvia; Roland, Benoit Florent; Staykova, Zlatka; Van Haevermaet, Hans; Van Mechelen, Pierre; Van Spilbeeck, Alex; Alves, Gilvan Augusto; Martins, Thiago Dos Reis; Pol, Maria Elena; Vaz Da Silva Filho, Mario; Alda Junior, Walter Luiz; Carvalho, Wagner De Paula; Chinellato, Jose Augusto; De Oliveira Martins, Carley Pedro; Figueiredo, Diego Matos; Tonelli Manganote, Edmilson Jose; Molina Insfran, Jorge Andres; Mundim, Luiz; Nogima, Helio; Prado Da Silva, Wanda Lucia; Santoro, Alberto; Rosa Lopes Zachi, Alessandro; Finger, Miroslav; Finger, Michael; Tsamalaidze, Zviad; Borras, Kerstin; Gunnellini, Paolo; Jung, Hannes; Knutsson, Albert Hans; Lutz, Benjamin; Ribeiro Cipriano, Pedro Miguel; Sen, Niladri; Baus, Colin; Katkov, Igor; Ulrich, Ralf Matthias; Wohrmann, H; Panagiotou, Apostolos; Bencze, Gyorgy; Horvath, D; Bala, Suman; Gupta, Ruchi; Jindal, M; Lal, Manjit Kaur; Nishu, Nishu; Saini, Lovedeep Kaur; Banerjee, Sunanda; Bhattacharya, S; Gomber, Bhawna; Jain, Shilpi; Khurana, Raman; Sharan, Manoj Kumar; Aziz, Tariq; Maity, Manas; Majumder, Gobinda; Mazumdar, Kajari; Mohanty, Gagan Bihari; Katta, Sudhakar; Banerjee, Sudeshna; Dugad, Shashikant Raichand; Etesami, Seyed Mohsen; Fahim, Ali; Jafari, Abideh; Paktinat Mehdiabadi, Saeid; Zeinali, Maryam; Penzo, Aldo; Afanasyev, A; Bunin, Pavel; Ershov, Yuri; Fedoseev, Oleg; Gavrilenko, Mikhail; Golutvin, Igor; Gorbunov, Ilya; Konoplynikov, V; Malakhov, Alexander; Moisenz, Petr; Smirnov, Vitaly; Volodko, Anton; Zarubin, Anatoly; Andreev, Yuri; Dermenev, Alexander; Krasnikov, Nikolay; Pashenkov, Anatoli; Tlisov, Danila; Toropin, A; Epshteyn, Vladimir; Erofeeva, Maria; Gavrilov, Vladimir; Kosov, Mikhail Vladimirovich; Kudinov, Ilya; Lychkovskaya, Natalia; Popov, V; Safronov, Grigory; Semenov, Sergey; Stolin, Viatcheslav; Vlassov, Evgueni; Zhokin, Alexander; Belyaev, A; Boos, Eduard; Dubinin, Mikhail; Dudko, Lev; Ershov, Alexander; Gribushin, Andrey; Klyukhin, Vyacheslav; Kodolova, Olga; Korotkikh, Vladimir; Lokhtin, Igor; Markina, Anastasia; Obraztsov, Stepan; Perfilov, Maxim; Petrushanko, Sergey; Popov, Andrey; Savrin, Victor; Snigirev, Alexander; Vardanyan, Irina; Andreev, V; Azarkin, Maksim; Dremin, Igor; Kirakosyan, Martin; Leonidov, Andrey; Mesyats, Gennady; Vinogradov, Alexey; Bayshev, Igor; Bityukov, Sergey; Grishin, Viatcheslav; Kryshkin, Victor; Petrov, V; Ryutin, Roman; Sobol, Andrey; Turchanovich, Leonid; Troshin, Sergey; Uzunyan, Andrey; Volkov, Alexey; Santanastasio, Francesco; Adiguzel, Aytul; Bakirci, Numan Mustafa; Cerci, Salim; Dozen, Candan; Dumanoglu, Isa; Eskut, Eda; Girgis, Semiray; G�kbulut, Gul; Gurpinar, Emine; Hos, Ilknur; Kangal, Evrim Ersin; Karapinar, Guler; Kayis Topaksu, Aysel; Onengut, Gulsen; Ozdemir, Kadri; Ozturk, Sertac; Polatoz, Ayse; Sogut, Kenan; Sunar Cerci, Deniz; Tali, Bayram; Topakli, Huseyin; Vergili, Latife Nukhet; Vergili, Mehmet; Aliyev, Takhmasib; Deniz, Muhammed; Guler, Ali Murat; Ozpineci, Altug; Serin, Meltem; Sever, Ramazan; Zeyrek, Mehmet; Deliomeroglu, Mehmet; Gulmez, Erhan; Isildak, Bora; Kaya, Mithat; Kaya, Ozlem; Ozkorucuklu, Suat; Sonmez, Nasuf; Cankocak, Kerem; Levchuk, Leonid; Hatakeyama, Kenichi; Liu, H; Scarborough, Tara Ann; Rumerio, Paolo; Heister, Arno; Hill, C; Lawson, Philip Daniel; Lazic, Dragoslav; Rohlf, James; St. John, Jason; Sulak, Lawrence; Gennadiy, G; Laird, Edward; Landsberg, Greg; Narain, Meenakshi; Sinthuprasith, Tutanon; Tsang, Ka Vang; Long, Owen Rosser; Nguyen, Harold; Paramesvaran, Sudarshan; Sturdy, Jared; Stuart, David; To, Wing; West, Christopher Alan; Apresyan, Artur; Chen, Y; Mott, Alexander Robert; Spiropulu, Maria; Winn, David; Abdoulline, Salavat; Anderson, J; Chlebana, Frank; Freeman, James; Green, Daniel; Hanlon, J; Hirschauer, James Francis; Joshi, Umeshwar; Kunori, Shuichi; Musienko, Yuri; Sharma, Seema; Spalding, William Jeffrey; Tkaczyk, Slawomir; Vidal, Richard; Whitmore, Juliana; Wu, W; Gaultney, Vanessa; Linn, Stephan; Markowitz, Pete Edward; Martinez, German Ruben; Gleyzer, Sergei; Hagopian, Sharon Lee; Hagopian, Vasken; Jenkins, Charles Merrill; Baarmand, Marc M; Dorney, Brian L; Vodopiyanov, Igor; Akgun, Ugur; Albayrak, Elif Asli; Bilki, Burak; Clarida, Warren James; Duru, Firdevs; Merlo, Jean-Pierre; Mermerkaya, Hamit; Mestvirishvili, Alexi; Moeller, Anthony Richard; Nachtman, Jane; Newsom, Charles Ray; Norbeck, John Edwin; Olson, Jonathan Edward; Onel, Yasar; Ozok, Ferhat; Sen, Sercan; Schmidt, Ianos; Tiras, Emrah; Yetkin, Taylan; Yi, Kai; Kenny, Raymond Patrick; Murray, Michael Joseph; Wood, Jeffrey Scott; Baden, Andrew; Calvert, Brian Michael; Eno, Sarah Catherine; Gomez, Jaime Arturo; Grassi, Tullio; Hadley, Nicholas John; Kellogg, Richard; Kolberg, Ted; Lu, Y; Marionneau, Matthieu; Mignerey, Alice Louise Cox; Peterman, Alison Marie; Skuja, Andris; Temple, Jeffrey; Tonjes, Marguerite Belt; Kao, Shih-Chuan; Klapoetke, Kevin Humphrey; Mans, Jeremiah Michael; Pastika, Nathaniel Joseph; Kroeger, Robert; Rahmat, Rahmat; Sanders, David; Cremaldi, Lucien Marcus; Jain, S; Anastassov, Anton; Velasco, Mayda Marie; Won, Steven; Heering, Adriaan; Karmgard, Daniel; Pearson, Tessa Jae; Ruchti, Randal; Berry, Edmund A; Halyo, Valerie; Hebda, Philip; Hunt, Adam Paul; Lujan, Paul Joseph; Marlow, Daniel; Medvedeva, Tatiana; Saka, Halil; Tully, Christopher; Zuranski, Andrzej Maciej; Barnes, Virgil Everett; Laasanen, Alvin; Bodek, Arie; Chung, Yeon Sei; de Barbaro, Pawel Jan; Eshaq, Yossof; Garcia-bellido, Aran Angel; Goldenzweig, Pablo David; Han, Ji Yeon; Harel, Amnon; Miner, Daniel Carl; Vishnevskiy, Dmitry; Zielinski, Marek; Bhatti, Anwar; Ciesielski, Robert Adam; Flanagan, Will Hogan; Kamon, Teruki; Montalvo, Roy Joaquin; Sakuma, Tai; Akchurin, Nural; Damgov, Jordan; Dudero, Phillip Russell; Kovitanggoon, Kittikul; Lee, Sung Won; Libeiro, Terence; Volobouev, Igor; Gurrola, Alfredo; Milstene, Caroline

    2012-01-01

    A readout box prototype for CMS Hadron Forward calorimeter upgrade is built and tested in CERN H2 beamline. The prototype is designed to enable simultaneous tests of different readout options for the four anode upgrade PMTs, new front-end electronics design and new cabling. The response of the PMTs with different readout options is uniform and the background response is minimal. Multi-channel readout options further enhance the background elimination. Passing all the electronics, mechanical and physics tests, the readout box proves to be capable of providing the forward hadron calorimeter operations requirements in the upgrade era.

  8. Ancestry and diversity of the HMG box superfamily

    OpenAIRE

    Laudet, V; Stehelin, D.; Clevers, J.C.

    1993-01-01

    The HMG box is a novel type of DNA-binding domain found in a diverse group of proteins. The HMG box superfamily comprises a.o. the High Mobility Group proteins HMG1 and HMG2, the nucleolar transcription factor UBF, the lymphoid transcription factors TCF-1 and LEF-1, the fungal mating-type genes mat-Mc and MATA1, and the mammalian sex-determining gene SRY. The superfamily dates back to at least 1,000 million years ago, as its members appear in animals, plants and yeast. Alignment of all known ...

  9. 3D resistivity method to monitor degradation of an organic contaminant in sand boxes

    Science.gov (United States)

    Fernandez, P. M.; Bloem, E.; Philippe, R.; French, H. K.

    2015-12-01

    Degradation of organic chemicals under various saturation conditions is a process highly relevant to protect groundwater. The redox potential drives the degradation of organic compounds. Its variation affects the water chemistry, gas release and responses of the geo-electrical signature. This study explores how non-invasive measurements sensitive to geo-electrical properties provides quantitative information about the in-situ redox situation. During this presentation, the preliminary results of a laboratory experiment to study the degradation of deicing chemicals with 3D resistivity and self-potential techniques, water samples will be shown. The experiment consists of sand boxes (1.0x0.5x0.4 m) to which both sides of each box is contaminated with propylene glycol, an aircraft deicing fluid, commonly used in Norwegian airports. Each source is placed near the water table with static conditions. At one side a conductor is placed, linking the contamination zone at the water table and the unsaturated zone with a low water content, to improve the degradation by facilitating the electron exchange. At the other side, degradation occurs under natural conditions. Each box is equipped with 288 electrodes, distributed on six faces to perform 3D resistivity measurements. In addition to the resistivity, self-potential measurements are taken from the sand surface. Six water wells are installed above and below the water table to provide more information on the degradation processes. Moreover, measurements of carbon dioxide on the surface are performed as higher concentrations are expected where the pollutant is degraded.

  10. Dynamic inhomogeneous S-Boxes in AES: a novel countermeasure against power analysis attacks

    Institute of Scientific and Technical Information of China (English)

    Chen Yicheng; Zou Xuecheng; Liu Zhenglin; Han Yu; Zheng Zhaoxia

    2008-01-01

    Substitution boxes (S-Boxes) in advanced encryption standard (AES) are vulnerable to attacks by power analysis. The general S-Boxes masking schemes in circuit level need to adjust the design flow and library databases. The masking strategies in algorithm level view each S-Box as an independent module and mask them respectively, which are costly in size and power for non-linear characteristic of S-Boxes. The new method uses dynamic inhomogeneous S-Boxes instead of traditional homogeneous S-Boxes, and arranges the S-Boxes randomly. So the power and data path delay of substitution unit become unpredictable. The experimental results demonstrate that this scheme takes advantages of the circuit characteristics of various S-Box implementations to eliminate the correlation between crypto operation and power. It needs less extra circuits and suits resource constrained applications.

  11. Quark–hadron duality constraints on γZ box corrections to parity-violating elastic scattering

    Directory of Open Access Journals (Sweden)

    N.L. Hall

    2016-02-01

    Full Text Available We examine the interference γZ box corrections to parity-violating elastic electron–proton scattering in the light of the recent observation of quark–hadron duality in parity-violating deep-inelastic scattering from the deuteron, and the approximate isospin independence of duality in the electromagnetic nucleon structure functions down to Q2≈1 GeV2. Assuming that a similar behavior also holds for the γZ proton structure functions, we find that duality constrains the γZ box correction to the proton's weak charge to be ℜe□γZV=(5.4±0.4×10−3 at the kinematics of the Qweak experiment. Within the same model we also provide estimates of the γZ corrections for future parity-violating experiments, such as MOLLER at Jefferson Lab and MESA at Mainz.

  12. F-box protein FBXL2 inhibits gastric cancer proliferation by ubiquitin-mediated degradation of forkhead box M1.

    Science.gov (United States)

    Li, Liang-qing; Pan, Dun; Chen, Hui; Zhang, Lin; Xie, Wen-jun

    2016-02-01

    F-box/LRR-repeat protein 2 (FBXL2), a component of Skp-Cullin-F box (SCF) ubiquitin E3 ligase, has been shown to inhibit tumorigenesis by targeting and ubiquitinating several oncoproteins. However, its role in gastric cancer remains poorly understood. Here, by tandem mass spectrometry, we show that FBXL2 interacts with forkhead box M1 (FoxM1) transcription factor. As a result, FBXL2 promotes ubiquitination and degradation of FoxM1 in gastric cancer cells. Furthermore, overexpression of FBXL2 inhibits, while its deficiency promotes cell proliferation and invasion. Expression levels of cell-cycle regulators (Cdc25B and p27), which are down-stream target effectors of FoxM1, are also regulated by FBXL2. Therefore, our results uncover a previous unknown network involving FBXL2 and FoxM1 in the regulation of gastric cancer growth.

  13. Discovery boxes for active spending of free time in the center for children and youth with special needs

    OpenAIRE

    Brbre, Irena

    2012-01-01

    Children and young people with minor mental health disorder who stay in the centers for children and youth with special needs, spend their free time in different ways. They have the option to take part in various extra-curricular activities depending on their interests, wishes, needs and abilities. I believe that one of such active spending of free time is also work with discovery boxes where children and young people can develop natural-historical procedures with their own experiences and ob...

  14. The HMG-box mitochondrial transcription factor xl-mtTFA binds DNA as a tetramer to activate bidirectional transcription.

    OpenAIRE

    Antoshechkin, I; Bogenhagen, D F; Mastrangelo, I A

    1997-01-01

    The mitochondrial HMG-box transcription factor xl-mtTFA activates bidirectional transcription by binding to a site separating two core promoters in Xenopus laevis mitochondrial DNA (mtDNA). Three independent approaches were used to study the higher order structure of xl-mtTFA binding to this site. First, co-immunoprecipitation of differentially tagged recombinant mtTFA derivatives established that the protein exists as a multimer. Second, in vitro chemical cross-linking experiments provided e...

  15. Eosinophils Modulate CD4+ T Cell Responses via High Mobility Group Box-1 in the Pathogenesis of Asthma

    OpenAIRE

    Shim, Eun-Jin; Chun, Eunyoung; Lee, Hyun-Seung; Bang, Bo-Ram; Cho, Sang-Heon; Min, Kyung-Up; Park, Heung-Woo

    2014-01-01

    Eosinophils have been reported to modulate T cell responses. Previously, we reported that high-mobility group box 1 protein (HMGB1) played a key role in the pathogenesis of asthma. This study was conducted to test our hypothesis that eosinophils could modulate T cell responses via HMGB1 in the pathogenesis of asthma characterized by eosinophilic airway inflammation. We performed in vitro experiments using eosinophils, dendritic cells (DCs), and CD4+ T cells obtained from a murine model of ast...

  16. Energy Savings Assessment for Digital-to-Analog Converter Boxes

    Energy Technology Data Exchange (ETDEWEB)

    Cheung, Hoi Ying Iris; Meier, Alan; Brown, Richard

    2011-01-18

    The Digital Television (DTV) Converter Box Coupon Program was administered by the U.S. government to subsidize purchases of digital-to-analog converter boxes, with up to two $40 coupons for each eligible household. In order to qualify as Coupon Eligible Converter Boxes (CECBs), these devices had to meet a number of minimum performance specifications, including energy efficiency standards. The Energy Star Program also established voluntary energy efficiency specifications that are more stringent than the CECB requirements. In this study, we measured the power and energy consumptions for a sample of 12 CECBs (including 6 Energy Star labeled models) in-use in homes and estimated aggregate energy savings produced by the energy efficiency policies. Based on the 35 million coupons redeemed through the end of the program, our analysis indicates that between 2500 and 3700 GWh per year are saved as a result of the energy efficiency policies implemented on digital-to-analog converter boxes. The energy savings generated are equivalent to the annual electricity use of 280,000 average US homes.

  17. How Users Search the Library from a Single Search Box

    Science.gov (United States)

    Lown, Cory; Sierra, Tito; Boyer, Josh

    2013-01-01

    Academic libraries are turning increasingly to unified search solutions to simplify search and discovery of library resources. Unfortunately, very little research has been published on library user search behavior in single search box environments. This study examines how users search a large public university library using a prominent, single…

  18. The Electronic Box Office: Humanities and Arts On the Cable.

    Science.gov (United States)

    Adler, Richard; Baer, Walter S.

    A series of essays examines the potential of cable television (CATV) for increasing the diversity and quality of television programing. Specifically, they explore what an electronic box office could do to encourage new production sources and develop new mechanisms for distributing programing in the humanities and performaing arts. The introduction…

  19. Features for Exploiting Black-Box Optimization Problem Structure

    DEFF Research Database (Denmark)

    Tierney, Kevin; Malitsky, Yuri; Abell, Tinus

    2013-01-01

    Black-box optimization (BBO) problems arise in numerous scientic and engineering applications and are characterized by compu- tationally intensive objective functions, which severely limit the number of evaluations that can be performed. We present a robust set of features that analyze the tness...

  20. 77 FR 74513 - Folding Gift Boxes From China

    Science.gov (United States)

    2012-12-14

    ...)). Background The Commission instituted this review on April 2, 2012 (77 FR 19714) and determined on July 6, 2012 that it would conduct an expedited review (77 FR 42762, July 20, 2012). The Commission transmitted... COMMISSION Folding Gift Boxes From China Determination On the basis of the record \\1\\ developed in...

  1. A Grey-Box Model for Spray Drying Plants

    DEFF Research Database (Denmark)

    Petersen, Lars Norbert; Poulsen, Niels Kjølstad; Niemann, Hans Henrik;

    2013-01-01

    are compared to datasets gathered at GEA Process Engineering’s test facility. The identified grey-box model parameters are identified from data and the resulting model fits the data well. The complexity of the model has been selected such that it is suitable for development of real-time optimization algorithms...

  2. Multidisciplinary Design and Optimization Framework for Aircraft Box Structures

    NARCIS (Netherlands)

    Van Dijk, R.E.C.; Zhao, X.; Wang, H.; Van Dalen, F.

    2012-01-01

    Competitive aircraft box structures are a perfect compromise between weight and price. The conceptual design process of these structures is a typical Multidisciplinary Design and Optimization effort, normally conducted by human engineers. The iterative nature of MDO turns development into a long and

  3. The Box Model and the Acoustic Sounder, a Case Study

    DEFF Research Database (Denmark)

    Jensen, Niels Otto; Lundtang Petersen, Erik

    1979-01-01

    Concentrations of SO2 in a large city during a subsidence situation are predicted as a function of time by means of a simple box model and the predictions are compared to actual SO2 concentration measurements. The agreement between model results and measurements is found to be excellent. The model...

  4. Downhole stuffing box aids pumping of heavy crude

    Energy Technology Data Exchange (ETDEWEB)

    Franco, A.

    1970-09-21

    Petroleos Mexicanos (Pemex) has found a new way to produce heavy oil from pumping wells. The key component is a bottomhole stuffing box which reduces the friction of the pumping string during the downstroke. The relatively simple system, already proven successful in the Ebano-Panuco area of Mexico, could be easily applied wherever operators are faced with the task of producing highly viscous oil and coping with the problem of constant sucker-rod string breakage. Basically, Pemex' method consists of a special downhole stuffing box and polished rod anchored at the end of the pumping string. The isolated tubing is filled with water to minimize friction, and the heavy oil is produced through the annular space between the tubing and casing strings. With Pemex' new downhole stuffing box, friction is minimized. Even though the system is applicable to practically any type of completion (any size of tubing and casing), Pemex has found it to be ideally suited for wells having 8-5/8-8in. casing or larger. The accompanying line diagram of a hookup for a well with 8-5/8-in. casing and 3-in. tubing shows the necessary installations. The stuffing box features a groove bolt at the top to allow tightening of a packing element without having to remove the assembly from the hole.

  5. [Interprofessional pill box management in an ambulatory care setting].

    Science.gov (United States)

    Abrecht, Loïc; Anchisi, Annick; Widmer, Daniel; Bugnon, Olivier; Du Pasquier, Sophie; Jotterand, Sébastien; Karlen, Martine; Herzig, Lilli

    2014-11-26

    Complex multimorbid patients are now more common in ambulatory care and the management of their medication more frequently needs interprofessional collaboration. This qualitative study explored health professional's main challenges when introducing, preparing and sharing the use of a pill box for a patient. Another objective of this study was to explore options for improving care in these situations.

  6. Ancient origin of animal U-box ubiquitin ligases

    Directory of Open Access Journals (Sweden)

    Marín Ignacio

    2010-10-01

    Full Text Available Abstract Background The patterns of emergence and diversification of the families of ubiquitin ligases provide insights about the evolution of the eukaryotic ubiquitination system. U-box ubiquitin ligases (UULs are proteins characterized by containing a peculiar protein domain known as U box. In this study, the origin of the animal UUL genes is described. Results Phylogenetic and structural data indicate that six of the seven main UUL-encoding genes found in humans (UBE4A, UBE4B, UIP5, PRP19, CHIP and CYC4 were already present in the ancestor of all current metazoans and the seventh (WDSUB1 is found in placozoans, cnidarians and bilaterians. The fact that only 4 - 5 genes orthologous to the human ones are present in the choanoflagellate Monosiga brevicollis suggests that several animal-specific cooptions of the U box to generate new genes occurred. Significantly, Monosiga contains five additional UUL genes that are not present in animals. One of them is also present in distantly-related protozoans. Along animal evolution, losses of UUL-encoding genes are rare, except in nematodes, which lack three of them. These general patterns are highly congruent with those found for other two families (RBR, HECT of ubiquitin ligases. Conclusions Finding that the patterns of emergence, diversification and loss of three unrelated families of ubiquitin ligases (RBR, HECT and U-box are parallel indicates that there are underlying, linage-specific evolutionary forces shaping the complexity of the animal ubiquitin system.

  7. The Popcorn Box Activity and Reasoning about Optimization

    Science.gov (United States)

    Whiteley, Walter J.; Mamolo, Ami

    2012-01-01

    A well-known optimization problem is the Popcorn Box investigation, which involves a movie theater snack container. The problem has been tailored for classroom investigations by the Ontario Association for Mathematics Education. The exploration was designed for students in grades 9 through 12. A common strategy proposed for algebra students is to…

  8. Developing Box Plots While Navigating the Maze of Data Representations

    Science.gov (United States)

    Duncan, Bruce; Fitzallen, Noleine

    2013-01-01

    The learning sequence described in this article was developed to provide students with a demonstration of the development of box plots from authentic data as an illustration of the advantages gained from using multiple forms of data representation. The sequence follows an authentic process that starts with a problem to which data representations…

  9. Immunohistochemical evidence for multiple photosystems in box jellyfish.

    Science.gov (United States)

    Ekström, Peter; Garm, Anders; Pålsson, Jonas; Vihtelic, Thomas S; Nilsson, Dan-Eric

    2008-07-01

    Cubomedusae (box jellyfish) possess a remarkable visual system with 24 eyes distributed in four sensory structures termed rhopalia. Each rhopalium is equipped with six eyes: two pairs of pigment cup eyes and two unpaired lens eyes. Each eye type probably captures specific features of the visual environment. To investigate whether multiple types of photoreceptor cells are present in the rhopalium, and whether the different eye types possess different types of photoreceptors, we have used immunohistochemistry with a range of vertebrate opsin antibodies to label the photoreceptors, and electroretinograms (ERG) to determine their spectral sensitivity. All photoreceptor cells of the two lens eyes of the box jellyfish Tripedalia cystophora and Carybdea marsupialis displayed immunoreactivity for an antibody directed against the zebrafish ultraviolet (UV) opsin, but not against any of eight other rhodopsin or cone opsin antibodies tested. In neither of the two species were the pigment cup eyes immunoreactive for any of the opsin antibodies. ERG analysis of the Carybdea lower lens eyes demonstrated a single spectral sensitivity maximum at 485 nm suggesting the presence of a single opsin type. Our data demonstrate that the lens eyes of box jellyfish utilize a single opsin and are thus color-blind, and that there is probably a different photopigment in the pigment cup eyes. The results support our hypothesis that the lens eyes and the pigment cup eyes of box jellyfish are involved in different and specific visual tasks. PMID:18504619

  10. Visual control of steering in the box jellyfish Tripedalia cystophora

    DEFF Research Database (Denmark)

    Petie, Ronald; Garm, Anders; Nilsson, Dan-Eric

    2011-01-01

    Box jellyfish carry an elaborate visual system consisting of 24 eyes, which they use for driving a number of behaviours. However, it is not known how visual input controls the swimming behaviour. In this study we exposed the Caribbean box jellyfish Tripedalia cystophora to simple visual stimuli a...... their bell in such a way that, if not tethered, they would turn and swim away from the dark area. We conclude that the visual system of T. cystophora has a predictable effect on swimming behaviour.......Box jellyfish carry an elaborate visual system consisting of 24 eyes, which they use for driving a number of behaviours. However, it is not known how visual input controls the swimming behaviour. In this study we exposed the Caribbean box jellyfish Tripedalia cystophora to simple visual stimuli...... to the darkening of one quadrant of the equatorial visual world by (1) increasing pulse frequency, (2) creating an asymmetry in the structure that constricts the outflow opening of the bell, the velarium, and (3) delaying contraction at one of the four sides of the bell. This causes the animals to orient...

  11. Testing the Box-Cox Parameter for an Integrated Process

    NARCIS (Netherlands)

    J. Huang (Jian); M. Kobayashi (Masahito); M.J. McAleer (Michael)

    2011-01-01

    textabstractThis paper analyses the constant elasticity of volatility (CEV) model suggested by Chan et al. (1992). The CEV model without mean reversion is shown to be the inverse Box-Cox transformation of integrated processes asymptotically. It is demonstrated that the maximum likelihood estimator o

  12. Fitting boxes to Manhattan scenes using linear integer programming

    KAUST Repository

    Li, Minglei

    2016-02-19

    We propose an approach for automatic generation of building models by assembling a set of boxes using a Manhattan-world assumption. The method first aligns the point cloud with a per-building local coordinate system, and then fits axis-aligned planes to the point cloud through an iterative regularization process. The refined planes partition the space of the data into a series of compact cubic cells (candidate boxes) spanning the entire 3D space of the input data. We then choose to approximate the target building by the assembly of a subset of these candidate boxes using a binary linear programming formulation. The objective function is designed to maximize the point cloud coverage and the compactness of the final model. Finally, all selected boxes are merged into a lightweight polygonal mesh model, which is suitable for interactive visualization of large scale urban scenes. Experimental results and a comparison with state-of-the-art methods demonstrate the effectiveness of the proposed framework.

  13. Measurement of the ambient gamma dose equivalent and kerma from the small 252Cf source at 1 meter and the small 60Co source at 2 meters

    Energy Technology Data Exchange (ETDEWEB)

    Carl, W. F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-07-30

    NASA Langley Research Center requested a measurement and determination of the ambient gamma dose equivalent rate and kerma at 100 cm from the 252Cf source and determination of the ambient gamma dose equivalent rate and kerma at 200 cm from the 60Co source for the Radiation Budget Instrument Experiment (Rad-X). An Exradin A6 ion chamber with Shonka air-equivalent plastic walls in combination with a Supermax electrometer were used to measure the exposure rate and free-in-air kerma rate of the two sources at the requested distances. The measured gamma exposure, kerma, and dose equivalent rates are tabulated.

  14. Divergence of recently duplicated M{gamma}-type MADS-box genes in Petunia.

    Science.gov (United States)

    Bemer, Marian; Gordon, Jonathan; Weterings, Koen; Angenent, Gerco C

    2010-02-01

    The MADS-box transcription factor family has expanded considerably in plants via gene and genome duplications and can be subdivided into type I and MIKC-type genes. The two gene classes show a different evolutionary history. Whereas the MIKC-type genes originated during ancient genome duplications, as well as during more recent events, the type I loci appear to experience high turnover with many recent duplications. This different mode of origin also suggests a different fate for the type I duplicates, which are thought to have a higher chance to become silenced or lost from the genome. To get more insight into the evolution of the type I MADS-box genes, we isolated nine type I genes from Petunia, which belong to the Mgamma subclass, and investigated the divergence of their coding and regulatory regions. The isolated genes could be subdivided into two categories: two genes were highly similar to Arabidopsis Mgamma-type genes, whereas the other seven genes showed less similarity to Arabidopsis genes and originated more recently. Two of the recently duplicated genes were found to contain deleterious mutations in their coding regions, and expression analysis revealed that a third paralog was silenced by mutations in its regulatory region. However, in addition to the three genes that were subjected to nonfunctionalization, we also found evidence for neofunctionalization of one of the Petunia Mgamma-type genes. Our study shows a rapid divergence of recently duplicated Mgamma-type MADS-box genes and suggests that redundancy among type I paralogs may be less common than expected.

  15. Enhancing Advanced Encryption Standard S-Box Generation Based on Round Key

    Directory of Open Access Journals (Sweden)

    Julia Juremi

    2015-05-01

    Full Text Available This paper presents a new AES-like design for key- dependent AES using S-box rotation. The algorithm involves key expansion algorithm together with S-box rotation and this property can be used to make the S-box key-dependent, hence providing a better security to the block cipher. Fixed S-box allows attackers to study S- box and find weak points while by using key-dependent S-Box approach, it makes it harder for attacker to do any offline analysis of an attack of one particular set of S- boxes. The cipher structure resembles the original AES, only the S-box is made key-dependent without changing the value. This new design is tested using the NIST Statistical Test and will be further cryptanalyzed with algebraic attack in order to permit its subversion or evasion.

  16. Conversion of Chemical Reaction Energy into Useful Work in the Van't Hoff Equilibrium Box

    Science.gov (United States)

    Bazhin, N. M.; Parmon, V. N.

    2007-01-01

    The ideal van't Hoff equilibrium box is described in detail. It shows that van't Hoff equilibrium box divided in two parts can simultaneously produce heat and useful work without violation of the first law of thermodynamics.

  17. 77 FR 38705 - Draft Specification for Airport Light Bases, Transformer Housings, Junction Boxes, and...

    Science.gov (United States)

    2012-06-28

    ... Federal Aviation Administration Draft Specification for Airport Light Bases, Transformer Housings... comment on the Draft ``Specification for Airport Light Bases, Transformer Housings, Junction Boxes, and... recommendations for airport light bases, transformer housings, junction boxes and accessories. The FAA has...

  18. Experimental Research and Numerical Simulation of Wing Boxes under Pure Bending Load

    OpenAIRE

    Peiyan Wang; Shile Yao; Xinmei Wang; Zhufeng Yue

    2014-01-01

    Two full-scale wing boxes with different types of butt joints were investigated under pure bending load, and numerical methods, including global analysis and detailed analysis, were proposed to determine the reasons for failure of the wing boxes. Wing boxes were tested under bending loads applied by a multichannel force control system. The experimental results showed that the region of the butt joint was the weakest location of the wing boxes, and the damage loads were far less than the desig...

  19. Specific Genomic Fingerprints of Phosphate Solubilizing Pseudomonas Strains Generated by Box Elements

    OpenAIRE

    Mohammad Bagher Javadi Nobandegani; Halimi Mohd Saud; Wong Mui Yun

    2014-01-01

    Primers corresponding to conserved bacterial repetitive of BOX elements were used to show that BOX-DNA sequences are widely distributed in phosphate solubilizing Pseudomonas strains. Phosphate solubilizing Pseudomonas was isolated from oil palm fields (tropical soil) in Malaysia. BOX elements were used to generate genomic fingerprints of a variety of Pseudomonas isolates to identify strains that were not distinguishable by other classification methods. BOX-PCR, that derived genomic fingerprin...

  20. The Role of Protein Electrostatics in Facilitating the Catalysis of DEAD-box Proteins

    OpenAIRE

    Frenz, Christopher M.

    2008-01-01

    Protein electrostatic states have been demonstrated to play crucial roles in catalysis, ligand binding, protein stability, and in the modulation of allosteric effects. Electrostatic states are demonstrated to appear conserved among DEAD-box motifs and evidence is presented that the structural changes that occur to DEAD box proteins upon ligand binding alter the DEAD-box motif electrostatics in a way the facilitates the catalytic role of the DEAD-box glutatmate.

  1. Photoluminescence and electro-optic properties of small (25-35 nm diameter) quantum boxes

    Science.gov (United States)

    Davis, L.; Ko, K. K.; Li, W.-Q.; Sun, H. C.; Lam, Y.; Brock, T.; Pang, S. W.; Bhattacharya, P. K.; Rooks, M. J.

    1993-05-01

    The luminescence and electro-optic properties of buried 25-35 nm quantum boxes have been measured. The quantum boxes were defined by a combination of molecular beam epitaxial growth and regrowth, electron beam lithography, and dry etching. The photoluminescence from 35 nm boxes shows a blue shift of about 15 meV compared to the bulk luminescence and an enhancement, taking into account the fill factor. An enhanced effective linear electrooptic coefficient is observed for the quantum boxes.

  2. Comparison of Laparoscopy Training Using the Box Trainer Versus the Virtual Trainer

    OpenAIRE

    Mohammadi, Yousef; Lerner, Michelle A.; Sethi, Amanjot S.; Sundaram, Chandru P.

    2010-01-01

    Background and Objectives: To evaluate whether training on a virtual reality laparoscopic simulator improves the performance on a laparoscopic box trainer. Methods: Twenty-six subjects were trained using a box trainer, and 17 participants were trained using a virtual simulator. Participants in the experimental group completed 1 session of 5 exercises on the box trainer, 4 sessions on the virtual simulator, and a final session on the box trainer. Participants in the control group completed 6 s...

  3. Visual pigment in the lens eyes of the box jellyfish Chiropsella bronzie

    OpenAIRE

    O'Connor, Megan; Garm, Anders; Marshall, Justin N.; Hart, Nathan S.; Ekström, Peter; Skogh, Charlotta; Nilsson, Dan-Eric

    2010-01-01

    Box jellyfish (Cubomedusae) possess a unique visual system comprising 24 eyes of four morphological types. Moreover, box jellyfish display several visually guided behaviours, including obstacle avoidance and light-shaft attractance. It is largely unknown what kind of visual information box jellyfish use for carrying out these behaviours. Brightness contrast is almost certainly involved, but it is also possible that box jellyfish extract colour information from their surroundings. The possible...

  4. Effects of the circuit box jumping on bone resorption, health-related to physical fitness and balance in the premenopausal women.

    Science.gov (United States)

    Anek, Achariya; Kanungsukasem, Vijit; Bunyaratavej, Narong

    2011-10-01

    The purpose of this research is to develop a circuit box jumping exercise program and to examine the effects of the circuit box jumping exercise program on bone formation, bone resorption, health related to physical fitness and balance of the premenopausal females. The samples consisted of 57 female volunteers from Chulalongkorn University, aged between 35-45. The subjects were divided into two groups: 28 females in the experimental group and 29 females in the control group by the simple random sampling method. The experimental group participated in the circuit box jumping exercise program while wearing heart rate monitors. The exercise speed was determined by the rhythm of the music. The experimental group completed two circuits of jumping at 6 stations with 10 jumps per station three times per week, for a period of twelve weeks. Each jumping box at Station 1 and 4 was 10 cm. high; the boxes at Station 2 and 5 were 15 cm. high; and at Station 3 and 6, the boxes were 20 cm. in height. The intensity is 60%-80% of a maximum heart rate. The control group did not participate in the circuit box jumping exercise program. The collected data before and after the experiment were the results of the physiology test, the biochemical bone markers, the health related physical fitness and the balance ability. The collected data were compared and analyzed by the mean and standard deviation. The differences of the tests are statistically significant at the .05 level. The results of the present study are as follows; 1. After the 12-week experiment training, the findings indicated that the mean scores on bone resorption (beta-Crosslaps) of the experimental group and the control group were significantly different at 0.05 level. In addition, the findings showed that the percentage changes on bone resorption (beta-Crosslaps) variance of the experiment group reduced by -25.6528%, while that of the control group reduced by -0.5933%. Bone formation (PINP/beta-Crosslaps) in the circuit box

  5. Air Enquirer's multi-sensor boxes as a tool for High School Education and Atmospheric Research

    Science.gov (United States)

    Morguí, Josep-Anton; Font, Anna; Cañas, Lidia; Vázquez-García, Eusebi; Gini, Andrea; Corominas, Ariadna; Àgueda, Alba; Lobo, Agustin; Ferraz, Carlos; Nofuentes, Manel; Ulldemolins, Delmir; Roca, Alex; Kamnang, Armand; Grossi, Claudia; Curcoll, Roger; Batet, Oscar; Borràs, Silvia; Occhipinti, Paola; Rodó, Xavier

    2016-04-01

    An educational tool was designed with the aim of making more comprehensive the research done on Greenhouse Gases (GHGs) in the ClimaDat Spanish network of atmospheric observation stations (www.climadat.es). This tool is called Air Enquirer and it consist of a multi-sensor box. It is envisaged to build more than two hundred boxes to yield them to the Spanish High Schools through the Education department (www.educaixa.com) of the "Obra Social 'La Caixa'", who funds this research. The starting point for the development of the Air Enquirers was the experience at IC3 (www.ic3.cat) in the CarboSchools+ FP7 project (www.carboschools.cat, www.carboschools.eu). The Air Enquirer's multi-sensor box is based in Arduino's architecture and contains sensors for CO2, temperature, relative humidity, pressure, and both infrared and visible luminance. The Air Enquirer is designed for taking continuous measurements. Every Air Enquirer ensemble of measurements is used to convert values to standard units (water content in ppmv, and CO2 in ppmv_dry). These values are referred to a calibration made with Cavity Ring Down Spectrometry (Picarro®) under different temperature, pressure, humidity and CO2 concentrations. Multiple sets of Air Enquirers are intercalibrated for its use in parallel during the experiments. The different experiments proposed to the students will be outdoor (observational) or indoor (experimental, in the lab) focusing on understanding the biogeochemistry of GHGs in the ecosystems (mainly CO2), the exchange (flux) of gases, the organic matter production, respiration and decomposition processes, the influence of the anthropogenic activities on the gases (and particles) exchanges, and their interaction with the structure and composition of the atmosphere (temperature, water content, cooling and warming processes, radiative forcing, vertical gradients and horizontal patterns). In order to ensure Air Enquirers a high-profile research performance the experimental designs

  6. A specific box switches the cell fate determining activity of XOTX2 and XOTX5b in the Xenopus retina

    Directory of Open Access Journals (Sweden)

    He Rong-Qiao

    2007-06-01

    Full Text Available Abstract Background Otx genes, orthologues of the Drosophila orthodenticle gene (otd, play crucial roles in vertebrate brain development. In the Xenopus eye, Xotx2 and Xotx5b promote bipolar and photoreceptor cell fates, respectively. The molecular basis of their differential action is not completely understood, though the carboxyl termini of the two proteins seem to be crucial. To define the molecular domains that make the action of these proteins so different, and to determine whether their retinal abilities are shared by Drosophila OTD, we performed an in vivo molecular dissection of their activity by transfecting retinal progenitors with several wild-type, deletion and chimeric constructs of Xotx2, Xotx5b and otd. Results We identified a small 8–10 amino acid divergent region, directly downstream of the homeodomain, that is crucial for the respective activities of XOTX2 and XOTX5b. In lipofection experiments, the exchange of this 'specificity box' completely switches the retinal activity of XOTX5b into that of XOTX2 and vice versa. Moreover, the insertion of this box into Drosophila OTD, which has no effect on retinal cell fate, endows it with the specific activity of either XOTX protein. Significantly, in cell transfection experiments, the diverse ability of XOTX2 and XOTX5b to synergize with NRL, a cofactor essential for vertebrate rod development, to transactivate the rhodopsin promoter is also switched depending on the box. We also show by GST-pull down that XOTX2 and XOTX5b differentially interact with NRL, though this property is not strictly dependent on the box. Conclusion Our data provide molecular evidence on how closely related homeodomain gene products can differentiate their functions to regulate distinct cell fates. A small 'specificity box' is both necessary and sufficient to confer on XOTX2 and XOTX5b their distinct activities in the developing frog retina and to convert the neutral orthologous OTD protein of Drosophila

  7. Combining Multiple External Representations and Refutational Text: An Intervention on Learning to Interpret Box Plots

    Science.gov (United States)

    Lem, Stephanie; Kempen, Goya; Ceulemans, Eva; Onghena, Patrick; Verschaffel, Lieven; Van Dooren, Wim

    2015-01-01

    Box plots are frequently misinterpreted and educational attempts to correct these misinterpretations have not been successful. In this study, we used two instructional techniques that seemed powerful to change the misinterpretation of the area of the box in box plots, both separately and in combination, leading to three experimental conditions,…

  8. Entanglement and decoherence of a micromechanical resonator via coupling to a Cooper box

    OpenAIRE

    Armour, A. D.; Blencowe, M. P.; Schwab, K. C.

    2001-01-01

    We analyse the quantum dynamics of a micromechanical resonator capacitively coupled to a Cooper box. With appropriate quantum state control of the Cooper box, the resonator can be driven into a superposition of spatially separated states. The Cooper box can also be used to probe the environmentally-induced decoherence of the resonator superposition state.

  9. Justification procedure of hydrogen safety of RU BN compartments as exemplified by steam generator box

    International Nuclear Information System (INIS)

    Basic proposals on completing calculational procedures of sodium cooled reactors hydrogen safety justification, particularly steam generator (SG) box, are presented. It is pointed out that hydrogen appearance in SG box is possible only in accidents with multiple failures. The data presented shows that hydrogen safety and explosion-proofness of fast reactor facility SG box are provided without any special complex and expensive means

  10. 76 FR 16350 - Medical Devices; Ovarian Adnexal Mass Assessment Score Test System; Labeling; Black Box Restrictions

    Science.gov (United States)

    2011-03-23

    ... addition of this black box warning to product labeling, advertising, and marketing materials, the Agency... Assessment Score Test System; Labeling; Black Box Restrictions AGENCY: Food and Drug Administration, HHS... be in a black box and must appear in all labeling, advertising, and promotional material. The...

  11. Is Think Outside the Box 21st Century Code for Imagination, Innovation, Creativity, Critical Thinking, Intuition?

    Science.gov (United States)

    Notar, Charles E.; Padgett, Sharon

    2010-01-01

    It is the authors' contention that there is no such thing as "thinking outside the box." However, the term has become an iconic phrase for a generation. The discussion presents the authors' thoughts on why there is no box in which to think outside. If there is a box, then accidental learning would never exist for students.

  12. THE USE OF EVENT DATA RECORDER (EDR – BLACK BOX

    Directory of Open Access Journals (Sweden)

    Gabriel Nowacki

    2014-03-01

    Full Text Available The paper refers to the registration of road events by a modern device called EDR – black box for all types of the motor vehicles. The device records data concerning vehicle’s technical condition, the way it was driven and RTS. The recorder may be used in private and commercial cars, taxies, buses and trucks. The recorder may serve the purpose of a neutral witness for the police, courts and insurance firms, for which it will facilitate making the reconstruction of the road accidents events and will provide a proof for those who caused them. The device will bring efficient driving, which will significantly contribute to decreasing the number of road accidents and limiting the environmental pollution. In the end in the last year German parliament backed a proposal to the European Commission to put black boxes, which gather information from vehicles involved in accidents, in all the new cars from 2015 on.

  13. Application of glove box robotics to hazardous waste management

    International Nuclear Information System (INIS)

    Lawrence Livermore Laboratory (LLNL) is developing a semi-automated system for handling, characterizing, processing, sorting, and repackaging hazardous wastes containing tritium. The system combines an IBM developed gantry robot with a special glove box enclosure designed to protect the operators and minimize the potential release of tritium to the atmosphere. All hazardous waste handling and processing will be performed remotely using the robot in a telerobotic mode for one-of-a-kind functions and in an autonomous mode for repetitive type operations. The system will initially be used in conjunction with a portable gas system designed to capture any gaseous phase tritium released into the glove box. This paper presents the objectives of this program, provides background related to LLNL's robotics and waste handling program, describes the major system components, outlines system operation, and discusses current status and plans

  14. Safeguards Approaches for Black Box Processes or Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Diaz-Marcano, Helly; Gitau, Ernest TN; Hockert, John; Miller, Erin; Wylie, Joann

    2013-09-25

    The objective of this study is to determine whether a safeguards approach can be developed for “black box” processes or facilities. These are facilities where a State or operator may limit IAEA access to specific processes or portions of a facility; in other cases, the IAEA may be prohibited access to the entire facility. The determination of whether a black box process or facility is safeguardable is dependent upon the details of the process type, design, and layout; the specific limitations on inspector access; and the restrictions placed upon the design information that can be provided to the IAEA. This analysis identified the necessary conditions for safeguardability of black box processes and facilities.

  15. Application Analysis of Ad Lamp-box Controller

    Institute of Scientific and Technical Information of China (English)

    FANG Yuan; LU Bin

    2014-01-01

    The ad lamp-box controller is designed in consideration that ordinary urban ad lights usually remain lit through the night and a specially assigned staff needs to be on duty to control their switches. It can be automatically controlled with a photo resistance testing the day and night as well as a CD4060 chip controlling the length of time interval between switching the ad lamp-boxes on and off. In this way, both energy and labor can be saved with the controller. It is matching with the target of“constructing a conservation-minded society”in our country and deserves to be promoted in market with its practical signifi-cance.

  16. Smart Remote for the Setup Box Using Gesture Control

    Directory of Open Access Journals (Sweden)

    Surepally Uday Kumar

    2016-04-01

    Full Text Available The basic purpose of this project is to provide a means to control a set top box (capable of infrared communication, in this case Hathway using hand gestures. Thus, this system will act like a remote control for operating set top box, but this will be achieved through hand gestures instead of pushing buttons. To send and receive remote control signals, this project uses an infrared LED as Transmitter. Using an infrared receiver, an Arduino can detect the bits being sent by a remote control. And to playback a remote control signal, the Arduino can flash an infrared LED at 38 kHz. With this project we can design a gesture controlled remote by using a glove, it can be fixed to the hand, we can send any signal of any length, at any related frequency, and thus we can design a universal remote.

  17. Competitive markets, collective action, and the Big Box Retailer problem

    Directory of Open Access Journals (Sweden)

    Brent D. Beal

    2012-11-01

    Full Text Available I use a stylized scenario—the Big Box retailer Problem—to demonstrate that the presence of behavioural interdependence in economic markets may result in deficient outcomes that are both stable and supported by ongoing participant behaviour. I present a theoretical discussion of social dilemmas and use the Big Box retailer Problem to illustrate that these characteristics—stability and ongoing support—cannot be reliably employed as indicators of outcome efficiency. Equally important is the conclusion that upfront costs and the ongoing necessity of monitoring and encouraging contributory behaviour are not reliable indicators of the relative inefficiency of outcomes associated with collective action. Questions are raised regarding the ethical responsibilities of business educators and the implications of social dilemmas for corporate social responsibility research.

  18. Observational semantics of the Prolog Resolution Box Model

    CERN Document Server

    Deransart, Pierre; Ferrand, Gérard

    2007-01-01

    This paper specifies an observational semantics and gives an original presentation of the Byrd box model. The approach accounts for the semantics of Prolog tracers independently of a particular Prolog implementation. Prolog traces are, in general, considered as rather obscure and difficult to use. The proposed formal presentation of its trace constitutes a simple and pedagogical approach for teaching Prolog or for implementing Prolog tracers. It is a form of declarative specification for the tracers. The trace model introduced here is only one example to illustrate general problems relating to tracers and observing processes. Observing processes know, from observed processes, only their traces. The issue is then to be able to reconstitute, by the sole analysis of the trace, part of the behaviour of the observed process, and if possible, without any loss of information. As a matter of fact, our approach highlights qualities of the Prolog resolution box model which made its success, but also its insufficiencies...

  19. Free box^k Scalar Conformal Field Theory

    CERN Document Server

    Brust, Christopher

    2016-01-01

    We consider the generalizations of the free U(N) and O(N) scalar conformal field theories to actions with higher powers of the Laplacian, box^k, in general dimension d. We study the spectra, Verma modules, anomalies and OPE of these theories. We argue that in certain d and k, the spectrum contains zero norm operators which are both primary and descendant, as well as extension operators which are neither primary nor descendant. In addition, we argue that in even dimensions d <= 2k, there are well-defined operator algebras which are related to the box^k theories and are novel in that they have a finite number of single-trace states.

  20. Box jellyfish use terrestrial visual cues for navigation.

    Science.gov (United States)

    Garm, Anders; Oskarsson, Magnus; Nilsson, Dan-Eric

    2011-05-10

    Box jellyfish have an impressive set of 24 eyes of four different types, including eyes structurally similar to those of vertebrates and cephalopods [1, 2]. However, the known visual responses are restricted to simple phototaxis, shadow responses, and object avoidance responses [3-8], and it has been a puzzle why they need such a complex set of eyes. Here we report that medusae of the box jellyfish Tripedalia cystophora are capable of visually guided navigation in mangrove swamps using terrestrial structures seen through the water surface. They detect the mangrove canopy by an eye type that is specialized to peer up through the water surface and that is suspended such that it is constantly looking straight up, irrespective of the orientation of the jellyfish. The visual information is used to navigate to the preferred habitat at the edge of mangrove lagoons. PMID:21530262

  1. Box jellyfish use terrestrial visual cues for navigation

    DEFF Research Database (Denmark)

    Garm, Anders; Oskarsson, Magnus; Nilsson, Dan-Eric

    2011-01-01

    Box jellyfish have an impressive set of 24 eyes of four different types, including eyes structurally similar to those of vertebrates and cephalopods [1, 2]. However, the known visual responses are restricted to simple phototaxis, shadow responses, and object avoidance responses [3-8], and it has...... been a puzzle why they need such a complex set of eyes. Here we report that medusae of the box jellyfish Tripedalia cystophora are capable of visually guided navigation in mangrove swamps using terrestrial structures seen through the water surface. They detect the mangrove canopy by an eye type...... that is specialized to peer up through the water surface and that is suspended such that it is constantly looking straight up, irrespective of the orientation of the jellyfish. The visual information is used to navigate to the preferred habitat at the edge of mangrove lagoons....

  2. Some considerations on the use of simple box models of contaminant fate in soils.

    Science.gov (United States)

    Pistocchi, A

    2013-03-01

    A simple box model computing time-averaged concentrations in soil and water of contaminants such as pesticides, following a pulse emission under the assumption of constant removal rates, is presented and evaluated against a benchmark model and some lysimeter experiments representative of different soil and climate settings in Europe. The simple box model allows capturing to some extent the trends of contaminant releases observed from lysimeters or predicted by the benchmark model. This suggests that the correct order of magnitude of environmental concentrations and loads of contaminants can be described as a first approximation by a very simple back-of-the-envelope calculation. In the calculation, the time lag between contaminant application and the start of runoff or leaching should be considered. In the absence of more detailed information, repeating the calculation for the extreme cases of zero and one month lag yields a reasonably realistic range, and the geometric mean of the two is suggested as a first guess estimate. This configures a practical approach for the screening of contaminant losses especially suited for the mapping of predicted environmental concentrations (PECs) for assessment at broad scale (such as continental Europe, a country or a large catchment), where contingent determinants of contaminant fate tend to be averaged out and use of more detailed models usually promises to yield little improvement of PECs. PMID:22895630

  3. Research on the Anticorrosion Coating Under the Paved Layer for Highway Steel Box Bridge Deck

    Institute of Scientific and Technical Information of China (English)

    SHEN Cheng-jin; MING Tu-zhang; HU Guang-wei; OU Xue-mei; GEN Ou

    2006-01-01

    The corrosion of the anticorrosion coating and the defects of the asphalt concrete paved layer have been investigated on long-span steel box bridge decks. The anticorrosion coating lies in the middle of two entirely different materials: a highway steel box bridge deck and a paved layer, which is used as anticorrosion and waterproof coating for the steel bridge deck. For our study, electrochemical corrosion and pull strength experiments have been selected for the investigation of the corrosion properties of inorganic zinc rich coating, epoxy zinc rich coating and arc sprayed zinc coating. The adhesive strength between the coatings and the panel, and the effect of the coating corrosion on the shear properties of the paved layers including cast asphalt, thermal asphalt mortar, epoxy asphalt and modified asphalt concrete have been investigated. The results show that the adhesive strength between the coatings and the bridge panel is controlled by the method of pre-processing rust removal. Coating by sandblasting has stronger adhesive strength than coating by shot peening. The results also reveal that shear strength of the paved layer is affected by the corrosion product of zinc coating. The arc sprayed zinc coating has stronger shear strength than zinc rich coatings.

  4. Fractality of Massive Graphs: Scalable Analysis with Sketch-Based Box-Covering Algorithm

    CERN Document Server

    Akiba, Takuya; Takaguchi, Taro

    2016-01-01

    Analysis and modeling of networked objects are fundamental pieces of modern data mining. Most real-world networks, from biological to social ones, are known to have common structural properties. These properties allow us to model the growth processes of networks and to develop useful algorithms. One remarkable example is the fractality of networks, which suggests the self-similar organization of global network structure. To determine the fractality of a network, we need to solve the so-called box-covering problem, where preceding algorithms are not feasible for large-scale networks. The lack of an efficient algorithm prevents us from investigating the fractal nature of large-scale networks. To overcome this issue, we propose a new box-covering algorithm based on recently emerging sketching techniques. We theoretically show that it works in near-linear time with a guarantee of solution accuracy. In experiments, we have confirmed that the algorithm enables us to study the fractality of million-scale networks fo...

  5. Construction Technology Analysis of Concrete Composite Box Net Floor%混凝土叠合箱网梁楼盖施工技术分析

    Institute of Scientific and Technical Information of China (English)

    叶雷杰

    2014-01-01

    Concrete composite box net floor is a special ribbed slab floor, from prefabricated composite box and cast nets (rib) beam combination, its characteristic is flat at the botom, saving materials and large cavity net beam structure stress. The author combining with practical experiences makes a simple analysis of the composite box net beamceiling te- chnique in this paper.%混凝土叠合箱网梁楼盖是一种特殊的密肋梁楼盖,由预制叠合箱和现浇网(肋)梁组合而成,特点是底部平整、节约耗材和大空腔网梁构造受力等。笔者结合实际经验,在本文中简单地分析了叠合箱网梁楼盖技术。

  6. The Boxing Day Tsunami: Could the Disaster have been Anticipated?

    Science.gov (United States)

    Cummins, P. R.; Burbdige, D.

    2005-05-01

    The occurrence of the 26 December, 2004 Sumatra-Andaman earthquake and the accompanying "Boxing Day" Tsunami, which killed over 280,00, has been described as one of the most lethal natural disasters in human history. Many lives could have been saved had a tsunami warning system, similar to that which exists for the Pacific Ocean, been in operation for the Indian Ocean. The former exists because great subduction zone earthquakes have generated destructive, Pacific-wide tsunami in the Pacific Ocean with some frequency. Prior to 26 December, 2004, all of the world's earthquakes with magnitude > 9 were widely thought to have occurred in the Pacific Ocean, where they caused destructive tsunami. Could the occurrence of similar earthquakes and tsunami in the Indian Ocean been predicted prior to the 2004 Box Day Tragedy? This presentation will argue that the answer is "Yes". Almost without exception (the exception being the 1952 Kamchatka earthquake) the massive subduction zone earthquakes and tsunami of the Pacific Ocean have been associated with the subduction of relatively young ocean lithosphere (literature and were the subject of recent research. In particular, research by Zachariasen et al. (1999 and 2000) had inferred that the magnitude of the 1833 event may have been as high as 9.2. Calculations for the tsunami that might have been associated with this event had shown, prior to 26 Dec, that it would affect the entire Indian Ocean basin, although due to the earthquake's location 1000 km southeast of the Boxing day event, the effects in the Bay of Bengal would not have been as severe. Thus, it seems to this author that the Boxing Day event could and should have been anticipated. This presentation will further consider why it was not, and what steps can be taken to anticipate and mitigate the effects of future events that may occur in the Indian Ocean and elsewhere.

  7. Mutated hybrid inflation in $f(R,{\\Box}R)$-gravity

    CERN Document Server

    Iihoshi, Masao

    2010-01-01

    A new hybrid inflationary scenario in the context of $f(R,{\\Box}R)$-gravity is proposed. Demanding the waterfall field to 'support the potential from below' [unlike the original proposal by Stewart in Phys. Lett. B345, 414 (1995)], we demonstrate that the scalar potential is similar to that of the large-field chaotic inflation model proposed by Linde in Phys. Lett. B129, 177 (1983).

  8. Evaluation of multi-box diagrams in six dimensions

    International Nuclear Information System (INIS)

    We present a simple method which simplifies the evaluation of the on-shell multiple box diagrams reducing them to triangle type ones. For the L-loop diagram one gets the expression in terms of Feynman parameters with 2L-fold integration. As examples we consider the 2 and 3 loops cases, the numerical integration up to six loops is also presented. The method is valid in six dimensions where neither UV not IR divergences appear

  9. Black-Box Algorithms for Sampling from Continuous Distributions

    OpenAIRE

    Hörmann, Wolfgang; Leydold, Josef

    2006-01-01

    For generating non-uniform random variates, black-box algorithms are powerful tools that allow drawing samples from large classes of distributions. We give an overview of the design principles of such methods and show that they have advantages compared to specialized algorithms even for standard distributions, e.g., the marginal generation times are fast and depend mainly on the chosen method and not on the distribution. Moreover these methods are suitable for specialized tasks like sampling ...

  10. Chinese boxes: "Typhoon" and Conrad's history of the Chinese

    OpenAIRE

    Kerr, D.

    2009-01-01

    This essay examines the novel "Typhoon," by Joseph Conrad, as a story about Chinamen coolies and seamen onboard a steamer transporting Chinese laborers. It argues that the Chinese boxes of the coolies represent several versions of the history of the Chinese and that the coolies are also representatives of a civilization with ideas and institutions, a law and order of nature. It also describes the images of Chinese life and their association to sociality, cooperation, nourishment, simplicity, ...

  11. Venom Proteome of the Box Jellyfish Chironex fleckeri

    OpenAIRE

    Brinkman, Diane L; Ammar Aziz; Alex Loukas; Jeremy Potriquet; Jamie Seymour; Jason Mulvenna

    2012-01-01

    The nematocyst is a complex intracellular structure unique to Cnidaria. When triggered to discharge, the nematocyst explosively releases a long spiny, tubule that delivers an often highly venomous mixture of components. The box jellyfish, Chironex fleckeri, produces exceptionally potent and rapid-acting venom and its stings to humans cause severe localized and systemic effects that are potentially life-threatening. In an effort to identify toxins that could be responsible for the serious heal...

  12. A NEW PRINCIPAL PIVOTING SCHEME FOR BOX LINEAR COMPLEMENTARITY PROBLEMS

    Institute of Scientific and Technical Information of China (English)

    WANGZHEMIN

    1997-01-01

    Judice and Pires developed in recent years principal pivoting methods for the solving ofthe so-called box linear complementarity problems (BLCPs) where the constraint matrices are restrictedly supposed to be of P-matrices. This paper aims at presenting a new principal pivoting scheme for BLCPs where the constraint matrices are loosely supposed to be row sufficient. This scheme can be applied to the solving of convex quadratic programs subject to linear constraints and arbitrary upper and lower bound constraints on variables.

  13. An Introduction to Plum Blossom Boxing: History, Culture and Practice

    Directory of Open Access Journals (Sweden)

    Guodong Zhang

    2012-07-01

    Full Text Available Meihuaquan (“Plum Blossom Fist [Boxing]” has traditionally been practiced as vernacular (folk art practiced among the Han ethnic group residing in the Shandong, Henan and Hebei Provinces of China. Historical documentation dates Plum Blossom Boxing to the seventeenth century. The classic Chinese novel, Shuǐhǔ Zhuàn (Marsh Chronicles recounts the martial exploits of Shandong’s twelfth century outlaw heroes who may have been Mei Boxers, also. Thus, for perhaps a millennium, the region has been noted for vernacular martial arts and social banditry. The region’s rampant lawlessness promoted highly-developed martial prowess among both lawbreakers and those who were required to protect themselves against the brigands. Cultural, economic, and environmental factors in the region gave rise to heterodox political and religious beliefs that frequently served as a catalyst for martial sects, most notably the “Boxers” who at the turn of the twentieth century, came into conflict with the imperial government. These factors laid the groundwork for the “character traits” of the art while Taoism, the Five Elements theory, and a concept of predictable change shaped Plum Boxing’s strategic and mechanical principles. In the past decade, there have been efforts to globalize this vernacular martial art. Rather than driving Plum Boxing to extinction it is likely that the folk and the “larger than local” will co-exist.

  14. Packaging design criteria modified fuel spacer burial box. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, P.F.

    1994-09-13

    Various Hanford facilities must transfer large radioactively contaminated items to burial/storage. Presently, there are eighteen Fuel Spacer Burial Boxes (FSBBs) available on the Hanford Site for transport of such items. Previously, the FSBBS were transported from a rail car to the burial trench via a drag-off operation. To allow for the lifting of the boxes into the burial trench, it will be necessary to improve the packagings lifting attachments and provide structural reinforcement. Additional safety improvements to the packaging system will be provided by the addition of a positive closure system and package ventilation. FSBBs that are modified in such a manner are referred to as Modified Fuel Spacer Burial Boxes (MFSBs). The criteria provided by this PDC will be used to demonstrate that the transfer of the MFSB will provide an equivalent degree of safety as would be provided by a package meeting offsite transportation requirements. This fulfills the onsite transportation safety requirements implemented in WHC-CM-2-14, Hazardous Material Packaging and Shipping. A Safety Analysis Report for Packaging (SARP) will be prepared to evaluate the safety of the transfer operation. Approval of the SARP is required to authorize transfer. Criteria are also established to ensure burial requirements are met.

  15. Box-Cox变换及其在STATA软件中的实现

    Institute of Scientific and Technical Information of China (English)

    陶庄

    2007-01-01

    目的:向医疗卫生领域的一线工作者介绍Box-Cox变换.方法:利用STATA软件包拟合Box-Cox回归模型.结果:通过使用示例数据库进行拟合,成功的进行了Box-Cox变换,并进行了回归分析.结论:使用Box-Cox变换是解决应变量不符合正态分布的重要方法,而STATA软件提供了进行Box-Cox变换的可行之道.

  16. 太阳日总辐射量的Box-Jenkins模型%BOX-JENKINS MODEL FOR DAILY SOLAR RADIATION

    Institute of Scientific and Technical Information of China (English)

    王敏; 丁明

    2012-01-01

    基于天文辐射和日照率数据,采用系统辨识的方法建立了模拟太阳日总辐射量的BJ( Box-Jenkins)模型.该模型与传统的(A)ngstr(m)的日总辐射量的计算公式相比,模拟和预测效果更好.%Based on astronomical radiation and percentage of possible sunshine data, the BJ (Box-Jenkins) model for daily solar irradiation is established using system identification method. The simulation and the one-step forecast results of the BJ model are better than Angstrm formula of the calculation.

  17. Saturation of the magnetorotational instability in the unstratified shearing box with zero net flux: convergence in taller boxes

    Science.gov (United States)

    Shi, Ji-Ming; Stone, James M.; Huang, Chelsea X.

    2016-03-01

    Previous studies of the non-linear regime of the magnetorotational instability in one particular type of shearing box model - unstratified with no net magnetic flux - find that without explicit dissipation (viscosity and resistivity) the saturation amplitude decreases with increasing numerical resolution. We show that this result is strongly dependent on the vertical aspect ratio of the computational domain Lz/Lx. When Lz/Lx ≲ 1, we recover previous results. However, when the vertical domain is extended Lz/Lx ≳ 2.5, we find the saturation level of the stress is greatly increased (giving a ratio of stress to pressure α ≳ 0.1), and moreover the results are independent of numerical resolution. Consistent with previous results, we find that saturation of the magnetorotational (MRI) in this regime is controlled by a cyclic dynamo which generates patches of strong toroidal field that switches sign on scales of Lx in the vertical direction. We speculate that when Lz/Lx ≲ 1, the dynamo is inhibited by the small size of the vertical domain, leading to the puzzling dependence of saturation amplitude on resolution. We show that previous toy models developed to explain the MRI dynamo are consistent with our results, and that the cyclic pattern of toroidal fields observed in stratified shearing box simulations (leading to the so-called butterfly diagram) may also be related. In tall boxes the saturation amplitude is insensitive to whether or not explicit dissipation is included in the calculations, at least for large magnetic Reynolds and Prandtl number. Finally, we show MRI turbulence in tall domains has a smaller critical Pmc, and an extended lifetime compared to Lz/Lx ≲ 1 boxes.

  18. Insights into the quality of DnaA boxes and their cooperativity

    DEFF Research Database (Denmark)

    Hansen, Flemming G.; Christensen, Bjarke Bak; Nielsen, Christina Bang;

    2006-01-01

    Plasmids carrying the mioC promoter region with its two DnaA boxes are as efficient in titration of DnaA protein as plasmids carrying a replicationinactivated oriC region with its five DnaA boxes. The two DnaA boxes upstream of the mioC promoter were mutated in various ways to study the cooperati......Plasmids carrying the mioC promoter region with its two DnaA boxes are as efficient in titration of DnaA protein as plasmids carrying a replicationinactivated oriC region with its five DnaA boxes. The two DnaA boxes upstream of the mioC promoter were mutated in various ways to study...... the cooperativity between the DnaA boxes, and to study in vivo the in vitrodefined 9mer DnaA box consensus sequence TTA/TTNCACA). The quality and cooperativity of the DnaA oxes were determined in two complementary ways: as titration of DnaA protein leading to derepression of the dnaA promoter, and as repression...... of the mioC promoter caused by the DnaA protein binding to the DnaA boxes. Titration of DnaA protein correlated with repression of the mioC promoter. The level of titration and repression with the normal promoter-proximal box (TTTTCCACA) depends strongly on the presence and the quality of a DnaA box...

  19. A neurologist's reflections on boxing. V. Conclude remarks.

    Science.gov (United States)

    Unterharnscheidt, F

    1995-01-01

    Clinical and morphological publications have shown convincingly, that participation in boxing leads to a severe permanent brain damage. The extent of the brain damage is correlated to the number of bouts fought, which correspondents in a certain way how many blows against his head a boxer received and to his weight class. The intensity of a boxing blow of a heavyweight is much more severe than those achieved by boxers of lighter weight classes. The permanent brain damage in a boxer, the amateur and the professional boxer, manifests itself in several clinical syndromes in which the pyramidal, the extrapyramidal and the cerebellar systems are involved. A traumatic Parkinsonism, in its complete or abortive form, develops as the result of the numerous boxing blows a boxer sustains in his boxing career. Especially lateral parts of the substantia nigra are affected and reveal at macroscopical and microscopical examination a severe loss of pigmented neurons. Melanin pigment is visible free in the tissue and/or is phagozytosed in macrophages and glial cells. The traumatic Parkinson syndrome, often only in an abortive form, is combined in a boxer with additional clinical and morphological findings due to traumatic lesions in other areas of the brain. It is not as pure as in a patient with a Parkinson syndrome sui generis. The permanent brain damage in a boxer is diffuse, involving all areas of the brain. Especially involved are the large neurons of different layers of the cerebral cortex, the neurons of the Ammons horn formation, the Purkinje cells of the cerebellum. In place of destroyed and lost neurons, proliferation of glial elements, especially astroglial cells, has occurred. The defects are first replaced by protoplasmatic astroglial elements, and later by fibrillary astroglia. The destroyed neurons are replaced by glial scar tissue, which cannot perform the functions of the lost neurons. It is a process which is called partial necrosis of brain tissue. There is no

  20. Fano-Kondo and the Kondo box regimes crossover in a quantum dot coupled to a quantum box.

    Science.gov (United States)

    Apel, Victor M; Orellana, Pedro A; Pacheco, Monica; Anda, Enrique V

    2013-12-18

    In this work, we study the Kondo effect of a quantum dot (QD) connected to leads and to a discrete set of one-particle states provided by a quantum box represented by a quantum ring (QR) pierced by a magnetic flux side attached to the QD. The interplay between the bulk Kondo effect and the so-called Kondo box regime is studied. In this system the QR energies can be continuously modified by the application of the magnetic field. The crossover between these two regimes is analyzed by changing the connection of the QD to the QR from the weak to the strong coupling regime. In the weak coupling regime, the differential conductance develops a sequence of Fano-Kondo anti-resonances due to destructive interference between the discrete quantum ring levels and the conducting Kondo channel provided by the leads. In the strong coupling regime the differential conductance has very sharp resonances when one of the Kondo discrete sub-levels characterizing the Kondo box is tuned by the applied potential. The conductance, the current fluctuations and the Fano coefficient result as being the relevant physical magnitudes to be analyzed to reveal the physical properties of these two Kondo regimes and the crossover region between them. The results were obtained by using the slave boson mean field theory (SBMFT). PMID:24275637

  1. Complexity, public reporting, and choice of doctors: a look inside the blackest box of consumer behavior.

    Science.gov (United States)

    Schlesinger, Mark; Kanouse, David E; Martino, Steven C; Shaller, Dale; Rybowski, Lise

    2014-10-01

    Health care consumers often make choices that are imperfectly informed and inconsistent with their expressed preferences. Past research suggests that these shortcomings become more pronounced as choices become more complex, through either additional options or more performance metrics. But it is unclear why this is true: Consumer choice remains a "black box" that research has scarcely illuminated. In this article, we identify four pathways through which complexity may impair consumer choice. We examine these pathways using data from an experiment in which consumers (hypothetically) selected a primary care physician. Some of the loss of decision quality accompanying more complex choice sets can be explained by consumers' skills and decision-making style, but even after accounting for these factors, complexity undermines the quality of decision making in ways that cannot be fully explained. We conclude by discussing implications for report designers, sponsors, and policy makers aspiring to promote consumer empowerment and health care quality.

  2. Stem Cell Therapy in Acute Myocardial Infarction: A Pot of Gold or Pandora's Box

    Directory of Open Access Journals (Sweden)

    V. K. Shah

    2011-01-01

    Full Text Available Stem cell therapy for conditions characterized by myocyte loss in myocardial infarction and heart failure is intuitively appealing. Stem cells from various sources, including heart itself in preclinical and animal studies, have shown the potential to improve the function of ventricular muscle after ischaemic injury. The clinical experience from worldwide studies have indicated the safety profile but with modest benefits. The predominant mechanisms of transplanted cells for improving cardiac function have pointed towards paracrine effects rather than transdifferentiation into cardiomyocytes. Thus, further investigations should be encouraged towards bench side and bedside to resolve various issues for ensuring the correct type and dosing of cells, time, and method of delivery and identify correct mechanism of functional improvement. An interdisciplinary effort at the scientific, clinical, and the government front will bring successful realization of this therapy for healing the heart and may convert what seems now a Pandora's Box into a Pot of Gold.

  3. Contamination smoke: a simulation of heavy metal containing aerosols from fires in plutonium glove boxes: part II

    International Nuclear Information System (INIS)

    The study of the dispersion of plutonium bearing aerosols during glove box fires on a laboratory scale has been, in part I of this work, focussed on fires of polymethylmethacrylate (PMMA - the major glove box construction material) whose surfaces were contaminated with cerium-europium oxide powder as a substitute for plutonium-uranium oxide. The present part II completes the study with comparative fire experiments involving contaminated samples of various glove box materials burning in or exposed to the flames of the standardized 0.6 MW fire source previously developed. Beyond spreading of the Ce-Eu-oxide powder as mentioned above, the other important surface contamination process is used, i.e. deposition and subsequent drying of droplets from acid cerium-europium solutions. It is shown that, among the tested materials, and with the exception of synthetic glove rubber, burning PMMA spreads the most radioactive contamination. On the other hand, this potential risk is much lower for fires involving materials contaminated from solution deposition than from powder or pellets. Attempts to measure the airborne contaminant particle sizes did not yield conclusive results. They suggest, however, that contamination from solutions leads to smaller heavy-metal containing aerosol particles than contamination with powder

  4. JFK, a Kelch domain-containing F-box protein, links the SCF complex to p53 regulation.

    Science.gov (United States)

    Sun, Luyang; Shi, Lei; Li, Wenqian; Yu, Wenhua; Liang, Jing; Zhang, Hua; Yang, Xiaohan; Wang, Yan; Li, Ruifang; Yao, Xingrong; Yi, Xia; Shang, Yongfeng

    2009-06-23

    The p53 tumor suppressor plays a central role in integrating cellular responses to various stresses. Tight regulation of p53 is thus essential for the maintenance of genome integrity and normal cell proliferation. Currently, several ubiquitin ligases, including the single-subunit RING-finger types--MDM2, Pirh2, and COP1--and the HECT-domain type--ARF-BP1--have been reported to target p53 for degradation. Here, we report the identification of a human Kelch domain-containing F-box protein, JFK. We showed that JFK promotes ubiquitination and degradation of p53. But unlike MDM2, Pirh2, COP1, and ARF-BP1, all of which possess an intrinsic ubiquitin ligase activity, JFK destabilizes p53 through the assembly of a Skp1-Cul1-F-box complex. Significantly, JFK inhibits p53-dependent transcription, and depletion of JFK stabilizes p53, promotes cell apoptosis, arrests cells in the G(1) phase, and sensitizes cells to ionizing radiation-induced cell death. These data indicate that JFK is a critical negative regulator of p53 and represents a pathway for the maintenance of p53 levels in unstressed cells. Our experiments link the Skp1-Cul1-F-box system to p53 regulation.

  5. 49 CFR 231.1 - Box and other house cars built or placed in service before October 1, 1966.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Box and other house cars built or placed in... APPLIANCE STANDARDS § 231.1 Box and other house cars built or placed in service before October 1, 1966. Except for box and other house cars that comply with either § 231.27 or § 231.28, each box and...

  6. Impact attenuation of protective boxing and taekwondo headgear.

    Science.gov (United States)

    O'Sullivan, David M; Fife, Gabriel P

    2016-11-01

    This study aimed to compare the impact attenuation performance of boxing and taekwondo headgear in terms of peak linear and rotational acceleration. To measure the impact attenuation of headgear, a standardized (American Society for Testing and Materials (ASTM) F-2397) martial arts headgear striker was used to impart impacts to a 50th Percentile Male Hybrid III Crash Test Dummy head and neck complex. Two boxing (Adidas and Greenhill) and two taekwondo (Adidas and Nike) headgear, approved by the Association Internationale de Boxe Amateur and the World Taekwondo Federation (WTF), were selected. Each of the selected headgear was fitted to the Hybrid III head and subsequently subjected to five impacts at the front and side with a maximum impact interim time of 60 seconds by the rotating striker at 8 ± 0.3 m/s. Linear and rotational acceleration were recorded at 10,000 Hz. There were significant interactions of the impact location and brand on the rotational acceleration, F(3,40) = 6.7, p < .05. There were significant main effects of both impact location F(1,40) = 9.07, p < .05 and headgear brand F(3,40) = 9.9, p < .05 on the linear acceleration. Pairwise comparisons show significant differences between the front and side for both linear and rotational acceleration. The headgear tested failed the ASTM high impact test requirement to reduce the linear acceleration to below a threshold of 150 g. Further development of headgear to reduce impact linear and rotational acceleration magnitudes should be called for by the relevant sport governing bodies and initiated by headgear manufactures.

  7. Introduction to game physics with Box2D

    CERN Document Server

    Parberry, Ian

    2013-01-01

    Written by a pioneer of game development in academia, Introduction to Game Physics with Box2D covers the theory and practice of 2D game physics in a relaxed and entertaining yet instructional style. It offers a cohesive treatment of the topics and code involved in programming the physics for 2D video games. Focusing on writing elementary game physics code, the first half of the book helps you grasp the challenges of programming game physics from scratch, without libraries or outside help. It examines the mathematical foundation of game physics and illustrates how it is applied in practice thro

  8. Numerical Computation of Two-loop Box Diagrams with Masses

    CERN Document Server

    Yuasa, F; Hamaguchi, N; Ishikawa, T; Kato, K; Kurihara, Y; Fujimoto, J; Shimizu, Y

    2011-01-01

    A new approach is presented to evaluate multi-loop integrals, which appear in the calculation of cross-sections in high-energy physics. It relies on a fully numerical method and is applicable to a wide class of integrals with various mass configurations. As an example, the computation of two-loop planar and non-planar box diagrams is shown. The results are confirmed by comparisons with other techniques, including the reduction method, and by a consistency check using the dispersion relation.

  9. Box: Natural Language Processing Research Using Amazon Web Services

    Directory of Open Access Journals (Sweden)

    Axelrod Amittai

    2015-10-01

    Full Text Available We present a publicly-available state-of-the-art research and development platform for Machine Translation and Natural Language Processing that runs on the Amazon Elastic Compute Cloud. This provides a standardized research environment for all users, and enables perfect reproducibility and compatibility. Box also enables users to use their hardware budget to avoid the management and logistical overhead of maintaining a research lab, yet still participate in global research community with the same state-of-the-art tools.

  10. Fundamental Solutions to $\\Box_b$ on Certain Quadrics

    CERN Document Server

    Boggess, Albert

    2011-01-01

    The purpose of this article is to expand the number of examples for which the complex Green operator, that is, the fundamental solution to the Kohn Laplacian, can be computed. We use the Lie group structure of quadric submanifolds of $\\mathbb C^n\\times\\mathbb C^m$ and the group Fourier transform to reduce the $\\Box_b$ equation to ones that can be solved using modified Hermite functions. We use Mehler's formula and investigate 1) quadric hypersurfaces, where the eigenvalues of the Levi form are not identical (including possibly zero eigenvalues), and 2) the canonical quadrics in $\\mathbb C^4$ of codimension two.

  11. Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

    Science.gov (United States)

    Doyle, Monica; ONeil, Daniel A.; Christensen, Carissa B.

    2005-01-01

    The Advanced Technology Lifecycle Analysis System (ATLAS) is a decision support tool designed to aid program managers and strategic planners in determining how to invest technology research and development dollars. It is an Excel-based modeling package that allows a user to build complex space architectures and evaluate the impact of various technology choices. ATLAS contains system models, cost and operations models, a campaign timeline and a centralized technology database. Technology data for all system models is drawn from a common database, the ATLAS Technology Tool Box (TTB). The TTB provides a comprehensive, architecture-independent technology database that is keyed to current and future timeframes.

  12. A Grey Box Model for the Hydraulics in a Creek

    DEFF Research Database (Denmark)

    Jonsdottir, Harpa; Jacobsen, Judith L.; Madsen, Henrik

    1998-01-01

    The Saint-Venant equation of mass balance is used to derive a stochastics lumped model, describing the dynamics of a cross-sectional area in a river. The unknown parameters of the model are estimated by combining the physical equation with a set of data, a method known as grey box modelling....... The data consists of water level measurements every minute, at two locations in the river, during a period of nine days. The data was sub sampled to the frequency of 15 minutes. A maximum likelihood method is used to estimate the parameters in the model....

  13. Standard Waste Box Lid Screw Removal Option Testing

    Energy Technology Data Exchange (ETDEWEB)

    Anast, Kurt Roy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-03-11

    This report provides results from test work conducted to resolve the removal of screws securing the standard waste box (SWB) lids that hold the remediated nitrate salt (RNS) drums. The test work evaluated equipment and process alternatives for removing the 42 screws that hold the SWB lid in place. The screws were secured with a red Loctite thread locker that makes removal very difficult because the rivets that the screw threads into would slip before the screw could be freed from the rivet, making it impossible to remove the screw and therefore the SWB lid.

  14. Parameter Estimation in Stochastic Grey-Box Models

    DEFF Research Database (Denmark)

    Kristensen, Niels Rode; Madsen, Henrik; Jørgensen, Sten Bay

    2004-01-01

    An efficient and flexible parameter estimation scheme for grey-box models in the sense of discretely, partially observed Ito stochastic differential equations with measurement noise is presented along with a corresponding software implementation. The estimation scheme is based on the extended...... and proves to have better performance both in terms of quality of estimates for nonlinear systems with significant diffusion and in terms of reproducibility. In particular, the new tool provides more accurate and more consistent estimates of the parameters of the diffusion term....

  15. Band-pass filtered velocity statistics in decaying turbulent box

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    For homogeneous isotropic turbulence study,the acquisition of band-pass filtered velocity increments(FVI) in a non-forced turbulent box is still a challenge both experimentally and numerically.Turbulence and associated physical processes,at a given instant,are permanently contaminated by a forcing process which can seldom be universal.The situation tends to be the origin of intermittency and the non-Gaussian probability density distribution for acceleration and velocity gradients.To reveal implied mechanism...

  16. some chocolate和a box of chocolates的区别

    Institute of Scientific and Technical Information of China (English)

    王振元

    2012-01-01

    在《牛津小学英语》5A Unit8 A campingt rip一课中,有这么一句话:Miss Li has a box of chocolates and Mr Green has some fruit.这里出现了chocolate的复数。在平时的教学中,教师告诉学生chocolate是不可数名词,这里又出现了复数,作何解释呢?笔者认为,理解单复数还要根据不同的文化背景。

  17. MERIT FUNCTION AND GLOBAL ALGORITHM FOR BOX CONSTRAINED VARIATIONAL INEQUALITIES

    Institute of Scientific and Technical Information of China (English)

    张立平; 高自友; 赖炎连

    2002-01-01

    The authors consider optimization methods for box constrained variational inequalities. First, the authors study the KKT-conditions problem based on the original problem. A merit function for the KKT-conditions problem is proposed, and some desirable properties of the merit function are obtained. Through the merit function, the original problem is reformulated as minimization with simple constraints. Then, the authors show that any stationary point of the optimization problem is a solution of the original problem. Finally, a descent algorithm is presented for the optimization problem, and global convergence is shown.

  18. Design of AES S-box Against Electromagnetic Side-channel Attacks%抗电磁侧信道攻击的AES S盒设计

    Institute of Scientific and Technical Information of China (English)

    常小龙; 丁国良; 武翠霞; 王创伟

    2011-01-01

    This paper implements a S-box of Advanced Encryption Standard(AES) based on improved Masked Dynamic Differential Logic (MDDL)and semi-custom design flow. The experiment is finished three kinds of S-boxes which are based on different logic cell respectively and adapted the technology of TSMC0.18 μm. The ability against electromagnetic analysis of these S-boxes are evaluated. Experimental results show that electromagnetic emission produced by S-box based on the given defending logic is independent with input data. The new S-box can solve the problem of information leakage caused by the unbalanced dual signal, the capability of defending electromagnetic side-channel attacks of S-box is increased significantly.%根据改进的动态差分掩码防护逻辑以及集成电路的半定制流程设计高级加密标准S盒,采用TSMC0.18 μm工艺实现基于3种不同逻辑单元的S盒,并对其抗电磁侧信道攻击性能进行评估.实验结果表明,基于掩码防护逻辑的S盒电磁辐射与输入数据相互独立,能克服双轨电路信号线不平衡导致的信息泄漏问题,从而增强电路的抗电磁侧信道攻击能力.

  19. Tortoiseshell or Polymer? Spectroscopic Analysis to Redefine a Purported Tortoiseshell Box with Gold Decorations as a Plastic Box with Brass.

    Science.gov (United States)

    Pereira, António; Caldeira, Ana Teresa; Maduro, Belmira; Vandenabeele, Peter; Candeias, António

    2016-01-01

    The study and preservation of museum collections requires complete knowledge and understanding of constituent materials that can be natural, synthetic, or semi-synthetic polymers. In former times, objects were incorporated in museum collections and classified solely by their appearance. New studies, prompted by severe degradation processes or conservation-restoration actions, help shed light on the materiality of objects that can contradict the original information or assumptions. The selected case study presented here is of a box dating from the beginning of the 20th century that belongs to the Portuguese National Ancient Art Museum. Museum curators classified it as a tortoiseshell box decorated with gold applications solely on the basis of visual inspection and the information provided by the donor. This box has visible signs of degradation with white veils, initially assumed to be the result of biological degradation of a proteinaceous matrix. This paper presents the methodological rationale behind this study and proposes a totally non-invasive methodology for the identification of polymeric materials in museum artifacts. The analysis of surface leachates using (1)H and (13)C nuclear magnetic resonance (NMR) complemented by in situ attenuated total reflection infrared spectroscopy (ATR FT-IR) allowed for full characterization of the object s substratum. The NMR technique unequivocally identified a great number of additives and ATR FT-IR provided information about the polymer structure and while also confirming the presence of additives. The pressure applied during ATR FT-IR spectroscopy did not cause any physical change in the structure of the material at the level of the surface (e.g., color, texture, brightness, etc.). In this study, variable pressure scanning electron microscopy (VP-SEM-EDS) was also used to obtain the elemental composition of the metallic decorations. Additionally, microbiologic and enzymatic assays were performed in order to identify the

  20. Innovation by design lessons from post box design & development

    CERN Document Server

    Chakravarthy, Battula Kalyana

    2013-01-01

    The book provides an in-depth knowledge on how a product is designed and developed by Product Designers. This has been achieved through a case study of one product – the Post Box. This product was chosen for the study primarily due to its simple and non-technical nature as that would make it easy for the readers to comprehend the design process. At the same time the Post Box posed all the challenges a designer would face while creating a new product. Through a step by step process the book gradually takes the reader through the design and development journey – right from understanding the product, identifying the user need through market research, comprehending client’s brief, generating product ideas and concepts to development of prototype, manufacturing and final performance of the product. The book illustrates the stages in the design process that lead to innovation which is applicable to all types of products. To make the book more stimulating, interesting facts, figures and pictures on related iss...

  1. Spontaneous symmetry breaking in a split potential box

    CERN Document Server

    Shamriz, Elad; Malomed, Boris A

    2016-01-01

    We report results of the analysis of the spontaneous symmetry breaking (SSB) in the basic (actually, simplest) model which is capable to produce the SSB phenomenology in the one-dimensional setting. It is based on the Gross-Pitaevskii - nonlinear Schroedinger equation with the cubic self-attractive term and a double-well-potential built as an infinitely deep potential box split by a narrow (delta-functional) barrier. The barrier's strength, epsilon, is the single free parameter of the scaled form of the model. It may be implemented in atomic Bose-Einstein condensates and nonlinear optics. The SSB bifurcation of the symmetric ground state (GS) is predicted analytically in two limit cases, viz., for deep or weak splitting of the potential box by the barrier. For the generic case, a variational approximation (VA) is elaborated. The analytical findings are presented along with systematic numerical results. Stability of stationary states is studied through the calculation of eigenvalues for small perturbations, an...

  2. 金氏住宅%Golden House An Unfurled Box

    Institute of Scientific and Technical Information of China (English)

    罗恩·维特; 莎拉·怀特; 童彤; 范凌

    2012-01-01

    The Golden House is a design inspired by an unfurled box that links the different parts of a residence built in four different periods.The box acts as the core system of organisation,yet it slips fleetingly in and out of new and old,formal and informal regions of the residence as well as the difference of materials,embodying the coherency inscribed as a whole of the building.%文章介绍了金氏住宅的改造,设计围绕一个展开的简单棱柱体组织,以之为核心将4个不同时期建造的部分联系在一起,形成复合的、全新的建筑形和空间分隔,体现出远超各部分单纯叠加的相互关系的整体一致性。

  3. The approximate scaling law of the cochlea box model.

    Science.gov (United States)

    Vetesník, A; Nobili, R

    2006-12-01

    The hydrodynamic box-model of the cochlea is reconsidered here for the primary purpose of studying in detail the approximate scaling law that governs tonotopic responses in the frequency domain. "Scaling law" here means that any two solutions representing waveforms elicited by tones of equal amplitudes differ only by a complex factor depending on frequency. It is shown that this property holds with excellent approximation almost all along the basilar membrane (BM) length, with the exception of a small region adjacent to the BM base. The analytical expression of the approximate law is explicitly given and compared to numerical solutions carried out on a virtually exact implementation of the model. It differs significantly from that derived by Sondhi in 1978, which suffers from an inaccuracy in the hyperbolic approximation of the exact Green's function. Since the cochleae of mammals do not exhibit the scaling properties of the box model, the subject presented here may appear to be just an academic exercise. The results of our study, however, are significant in that a more general scaling law should hold for real cochleae. To support this hypothesis, an argument related to the problem of cochlear amplifier-gain stabilization is advanced. PMID:17008036

  4. Communications systems design for testability: Grey-box testing

    Science.gov (United States)

    Probert, Robert L.; Geldrez, Cecilia

    Large systems such as telecommunications systems may involve several million lines of executable code and tend to evolve incrementally, thus rendering testing and maintainability a very complex task. For this reason, testing and verification requirements must be defined and incorporated into the development process early in the software development cycle. Thus, design becomes a key component of these systems. An approach to assist in enhancing the testability of software designs is proposed, termed grey-box testing. One particular grey-box testing paradigm named semantic instrumentation is illustrated. Designs are represented as design machines, an extension of finite-state machines. A design-level plan for verification/test is then derived to guarantee branch coverage of the design machine for both normal behaviors and for processing of exceptions. Finally, semantic probes are defined to provide a mapping from the design machine to implemented code. These probes are used to document design decisions, implementation decisions, and execution traces during code verification and test. The process of semantic instrumentation is illustrated on communications services, more precisely, on the service of the alternating bit protocol.

  5. Pothole Detection System Using a Black-box Camera

    Directory of Open Access Journals (Sweden)

    Youngtae Jo

    2015-11-01

    Full Text Available Aging roads and poor road-maintenance systems result a large number of potholes, whose numbers increase over time. Potholes jeopardize road safety and transportation efficiency. Moreover, they are often a contributing factor to car accidents. To address the problems associated with potholes, the locations and size of potholes must be determined quickly. Sophisticated road-maintenance strategies can be developed using a pothole database, which requires a specific pothole-detection system that can collect pothole information at low cost and over a wide area. However, pothole repair has long relied on manual detection efforts. Recent automatic detection systems, such as those based on vibrations or laser scanning, are insufficient to detect potholes correctly and inexpensively owing to the unstable detection of vibration-based methods and high costs of laser scanning-based methods. Thus, in this paper, we introduce a new pothole-detection system using a commercial black-box camera. The proposed system detects potholes over a wide area and at low cost. We have developed a novel pothole-detection algorithm specifically designed to work with the embedded computing environments of black-box cameras. Experimental results are presented with our proposed system, showing that potholes can be detected accurately in real-time.

  6. Code Generation for Embedded Software for Modeling Clear Box Structures

    Directory of Open Access Journals (Sweden)

    V. Chandra Prakash

    2011-09-01

    Full Text Available Cleanroom software Engineering (CRSE recommended that the code related to the Application systems be generated either manually or through code generation models or represents the same as a hierarchy of clear box structures. CRSE has even advocated that the code be developed using the State models that models the internal behavior of the systems. No framework has been recommended by any Author using which the Clear boxes are designed using the code generation methods. Code Generation is one of the important quality issues addressed in cleanroom software engineering. It has been investigated that CRSE can be used for life cycle management of the embedded systems when the hardware-software co-design is in-built as part and parcel of CRSE by way of adding suitable models to CRSE and redefining the same. The design of Embedded Systems involves code generation in respect of hardware and Embedded Software. In this paper, a framework is proposed using which the embedded software is generated. The method is unique that it considers various aspects of the code generation which includes Code Segments, Code Functions, Classes, Globalization, Variable propagation etc. The proposed Framework has been applied to a Pilot project and the experimental results are presented.

  7. No Quantum Realization of Extremal No-Signaling Boxes

    Science.gov (United States)

    Ramanathan, Ravishankar; Tuziemski, Jan; Horodecki, Michał; Horodecki, Paweł

    2016-07-01

    The study of quantum correlations is important for fundamental reasons as well as for quantum communication and information processing tasks. On the one hand, it is of tremendous interest to derive the correlations produced by measurements on separated composite quantum systems from within the set of all correlations obeying the no-signaling principle of relativity, by means of information-theoretic principles. On the other hand, an important ongoing research program concerns the formulation of device-independent cryptographic protocols based on quantum nonlocal correlations for the generation of secure keys, and the amplification and expansion of random bits against general no-signaling adversaries. In both these research programs, a fundamental question arises: Can any measurements on quantum states realize the correlations present in pure extremal no-signaling boxes? Here, we answer this question in full generality showing that no nontrivial (not local realistic) extremal boxes of general no-signaling theories can be realized in quantum theory. We then explore some important consequences of this fact.

  8. Stuffing box for a sucker rod pump assembly

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, M.B.

    1987-03-03

    A stuffing box is described for use with a sucker rod pump assembly for a producing well including a polish rod at the upper end of the sucker rods, comprising a tubular housing for mounting on the wellhead of a producing well through which the polish rod reciprocates. Two longitudinally spaced packing assemblies are located in the tubular housing in sealing engagement with the polish rod and the housing to provide an annular chamber for a lubricating fluid to surround the polish rod. The box also comprises a lubricating fluid reservoir mounted on the tubular housing and surrounding the portion of the housing in which the annular chamber is located, upper and lower ports in the housing adjacent the upper and lower ends of the chamber connecting the annular chamber with the lubricating fluid reservoir, the housing being imperforate between the ports, and a removable annular spacer located in the annular chamber between the packing assemblies to hold the packing assemblies spaced apart. The spacer has upper and lower ports adjacent the upper and lower end of the chamber and is in substantially the same plane as the upper and lower ports in the housing.

  9. Venom proteome of the box jellyfish Chironex fleckeri.

    Directory of Open Access Journals (Sweden)

    Diane L Brinkman

    Full Text Available The nematocyst is a complex intracellular structure unique to Cnidaria. When triggered to discharge, the nematocyst explosively releases a long spiny, tubule that delivers an often highly venomous mixture of components. The box jellyfish, Chironex fleckeri, produces exceptionally potent and rapid-acting venom and its stings to humans cause severe localized and systemic effects that are potentially life-threatening. In an effort to identify toxins that could be responsible for the serious health effects caused by C. fleckeri and related species, we used a proteomic approach to profile the protein components of C. fleckeri venom. Collectively, 61 proteins were identified, including toxins and proteins important for nematocyte development and nematocyst formation (nematogenesis. The most abundant toxins identified were isoforms of a taxonomically restricted family of potent cnidarian proteins. These toxins are associated with cytolytic, nociceptive, inflammatory, dermonecrotic and lethal properties and expansion of this important protein family goes some way to explaining the destructive and potentially fatal effects of C. fleckeri venom. Venom proteins and their post-translational modifications (PTMs were further characterized using toxin-specific antibodies and phosphoprotein/glycoprotein-specific stains. Results indicated that glycosylation is a common PTM of the toxin family while a lack of cross-reactivity by toxin-specific antibodies infers there is significant divergence in structure and possibly function among family members. This study provides insight into the depth and diversity of protein toxins produced by harmful box jellyfish and represents the first description of a cubozoan jellyfish venom proteome.

  10. Visual control of steering in the box jellyfish Tripedalia cystophora.

    Science.gov (United States)

    Petie, Ronald; Garm, Anders; Nilsson, Dan-Eric

    2011-09-01

    Box jellyfish carry an elaborate visual system consisting of 24 eyes, which they use for driving a number of behaviours. However, it is not known how visual input controls the swimming behaviour. In this study we exposed the Caribbean box jellyfish Tripedalia cystophora to simple visual stimuli and recorded changes in their swimming behaviour. Animals were tethered in a small experimental chamber, where we could control lighting conditions. The behaviour of the animals was quantified by tracking the movements of the bell, using a high-speed camera. We found that the animals respond predictably to the darkening of one quadrant of the equatorial visual world by (1) increasing pulse frequency, (2) creating an asymmetry in the structure that constricts the outflow opening of the bell, the velarium, and (3) delaying contraction at one of the four sides of the bell. This causes the animals to orient their bell in such a way that, if not tethered, they would turn and swim away from the dark area. We conclude that the visual system of T. cystophora has a predictable effect on swimming behaviour. PMID:21832123

  11. Venom proteome of the box jellyfish Chironex fleckeri.

    Science.gov (United States)

    Brinkman, Diane L; Aziz, Ammar; Loukas, Alex; Potriquet, Jeremy; Seymour, Jamie; Mulvenna, Jason

    2012-01-01

    The nematocyst is a complex intracellular structure unique to Cnidaria. When triggered to discharge, the nematocyst explosively releases a long spiny, tubule that delivers an often highly venomous mixture of components. The box jellyfish, Chironex fleckeri, produces exceptionally potent and rapid-acting venom and its stings to humans cause severe localized and systemic effects that are potentially life-threatening. In an effort to identify toxins that could be responsible for the serious health effects caused by C. fleckeri and related species, we used a proteomic approach to profile the protein components of C. fleckeri venom. Collectively, 61 proteins were identified, including toxins and proteins important for nematocyte development and nematocyst formation (nematogenesis). The most abundant toxins identified were isoforms of a taxonomically restricted family of potent cnidarian proteins. These toxins are associated with cytolytic, nociceptive, inflammatory, dermonecrotic and lethal properties and expansion of this important protein family goes some way to explaining the destructive and potentially fatal effects of C. fleckeri venom. Venom proteins and their post-translational modifications (PTMs) were further characterized using toxin-specific antibodies and phosphoprotein/glycoprotein-specific stains. Results indicated that glycosylation is a common PTM of the toxin family while a lack of cross-reactivity by toxin-specific antibodies infers there is significant divergence in structure and possibly function among family members. This study provides insight into the depth and diversity of protein toxins produced by harmful box jellyfish and represents the first description of a cubozoan jellyfish venom proteome. PMID:23236347

  12. Numerical Characterization of a Composite Bonded Wing-Box

    Science.gov (United States)

    Smeltzer, Stanley S., III; Lovejoy, Andrew E.; Satyanarayana, Arunkumar

    2008-01-01

    The development of composite wing structures has focused on the use of mechanical fasteners to join heavily-loaded areas, while bonded joints have been used only for select locations. The focus of this paper is the examination of the adhesive layer in a generic bonded wing box that represents a "fastenerless" or unitized structure in order to characterize the general behavior and failure mechanisms. A global/local approach was applied to study the response of the adhesive layer using a global shell model and a local shell/solid model. The wing box was analyzed under load to represent a high-g up-bending condition such that the strains in the composite sandwich face sheets are comparable to an expected design allowable. The global/local analysis indicates that at these wing load levels the strains in the adhesive layer are well within the adhesive's elastic region, such that yielding would not be expected in the adhesive layer. The global/local methodology appears to be a promising approach to evaluate the structural integrity of the adhesively bonded structures.

  13. S-boxes generated using Affine Transformation giving Maximum Avalanche Effect

    Directory of Open Access Journals (Sweden)

    Kumara Shama

    2011-09-01

    Full Text Available The Advanced Encryption Standard (AES was published by National Institute of Standards and Technology (NIST in November 2001, to replace DES (Data Encryption Standard and Triple DES. The S-box(Substitution box used in AES is designed to be resistant to known cryptanalytic attacks [1][2]. The property of the S-box is that the output cannot be described as a simple mathematical function of the input. The S-box is designed to provide good avalanche effect. The Avalanche Criteria of S-box depends on the generator matrix A used in affine transformation to construct the S-box. This paper investigates the construction of Sboxes by affine transformation which satisfy maximum Avalanche Criteria.

  14. VBSM: VCC-Based Black Box Service Model with Enhanced Data Integrity

    Directory of Open Access Journals (Sweden)

    Won Min Kang

    2014-10-01

    Full Text Available Recently, intelligent transport systems have been applied to vehicle cloud environments. Such technology is especially useful for the systematic management of road traffic. Moreover, automobiles are increasingly equipped with a black box for accident prevention and preservation of evidence. Vehicle black boxes have become mandatory because black box images and voice data have served as forensic evidence in courts. However, the data from black boxes can be forged or modified by man-in-the-middle (MITM attacks and message hijacking. In this paper, we propose a vehicle cloud computing-based black box service model that can provide integrity for black box data through digital signatures in vehicle cloud computing (VCC environments. Our proposed model protects against MITM attacks and message hijacking using only a hash value and digital signature. Moreover, a mirroring technique (RAID 1 provides backup and recovery to protect the data from a traffic accident.

  15. High mobility group box1 protein is involved in acute inflammation induced by Clostridium difficile toxin A.

    Science.gov (United States)

    Liu, Ji; Zhang, Bei-Lei; Sun, Chun-Li; Wang, Jun; Li, Shan; Wang, Ju-Fang

    2016-06-01

    High mobility group box1 (HMGB1), as a damage-associated inflammatory factor, contributes to the pathogenesis of numerous chronic inflammatory and autoimmune diseases. In this study, we explored the role of HMGB1 in CDI (Clostridium difficile infection) by in vivo and in vitro experiments. Our results showed that HMGB1 might play an important role in the acute inflammatory responses to C. difficile toxin A (TcdA), affect early inflammatory factors, and induce inflammation via the HMGB1-TLR4 pathway. Our study provides the essential information for better understanding the molecular mechanisms of CDI and the potential new therapeutic strategies for the treatment of this infection. PMID:27151296

  16. Effect of heterogeneity of nest boxes on occurrence of gregarious nesting in laying hens

    DEFF Research Database (Denmark)

    Clausen, Tina; Riber, Anja Brinch

    2012-01-01

    Gregarious nesting, where hens select already occupied nest boxes even when other nest boxes are unoccupied, is an unwanted behaviour in laying hens that may reduce animal welfare and pose a financial cost to the producer. It has been suggested that gregarious nesting is caused by the difficulties...... nesting was higher in experimental groups compared to control groups (P right were higher compared to nest boxes positioned...

  17. Somatotype Analysis of Elite Boxing Athletes Compared with Nonathletes for Sports Physiotherapy

    OpenAIRE

    Noh, Ji-Woong; Kim, Ju-Hyun; Kim, Mee-Young; Lee, Jeong-Uk; Lee, Lim-Kyu; Park, Byoung-Sun; Yang, Seung-Min; Jeon, Hye-Joo; Lee, Won-Deok; Kwak, Taek-Yong; Jang, Sung-Ho; Lee, Tae-Hyun; Kim, Ju-Young; Kim, Junghwan

    2014-01-01

    [Purpose] The purpose of this study was to show somatotype and physical characteristic differences between elite boxing athletes and non-athletes. [Methods] The somatotypes of 23 elite boxing athletes and 23 nonathletes were measured with the Heath-Carter method. The subjects were divided into four weight divisions as follows: lightweight, light middleweight, middleweight, and heavyweight class. [Results] The endomorphic component values of the boxing athletes were lower than those of the non...

  18. ATP hydrolysis is required for DEAD-box protein recycling but not for duplex unwinding

    OpenAIRE

    Liu, Fei; Putnam, Andrea; Jankowsky, Eckhard

    2008-01-01

    DEAD-box proteins, the largest helicase family, catalyze ATP-dependent remodeling of RNA–protein complexes and the unwinding of RNA duplexes. Because DEAD-box proteins hydrolyze ATP in an RNA-dependent fashion, the energy provided by ATP hydrolysis is commonly assumed to drive the energetically unfavorable duplex unwinding. Here, we show efficient unwinding of stable duplexes by several DEAD-box proteins in the presence of the nonhydrolyzable ATP analog ADP-beryllium fluoride. Another ATP ana...

  19. Effect of material uncertainties on dynamic response of segmental box girder bridge

    OpenAIRE

    Suchart Limkatanyu; Kittisak Kuntiyawichai

    2007-01-01

    The main objective of this paper was to investigate the effect of material uncertainties on dynamic response of segmental box girder bridge subjected to a moving load, in this case a rapid passing trains. Literatures concerned with the design of segmental box girder bridge, the application of finite element analysis to model the segmental box girder bridge, and the minimum requirement for structural conditions of the bridge were described and discussed in detail. A series of finite element a...

  20. Modeling and new equipment definition for the vibration isolation box equipment system

    Science.gov (United States)

    Sani, Robert L.

    1993-01-01

    Our MSAD-funded research project is to provide numerical modeling support for the VIBES (Vibration Isolation Box Experiment System) which is an IML2 flight experiment being built by the Japanese research team of Dr. H. Azuma of the Japanese National Aerospace Laboratory. During this reporting period, the following have been accomplished: A semi-consistent mass finite element projection algorithm for 2D and 3D Boussinesq flows has been implemented on Sun, HP And Cray Platforms. The algorithm has better phase speed accuracy than similar finite difference or lumped mass finite element algorithms, an attribute which is essential for addressing realistic g-jitter effects as well as convectively-dominated transient systems. The projection algorithm has been benchmarked against solutions generated via the commercial code FIDAP. The algorithm appears to be accurate as well as computationally efficient. Optimization and potential parallelization studies are underway. Our implementation to date has focused on execution of the basic algorithm with at most a concern for vectorization. The initial time-varying gravity Boussinesq flow simulation is being set up. The mesh is being designed and the input file is being generated. Some preliminary 'small mesh' cases will be attempted on our HP9000/735 while our request to MSAD for supercomputing resources is being addressed. The Japanese research team for VIBES was visited, the current set up and status of the physical experiment was obtained and ongoing E-Mail communication link was established.

  1. The Black Box Theater and AV/IT Convergence: Creating the Classroom of the Future.

    Science.gov (United States)

    Valenti, Mark S.

    2002-01-01

    Describes "black box" classrooms, which incorporate audiovisual and information technologies to provide an inherently flexible learning environment. Details various technological components of such classrooms. (EV)

  2. Ethical and Practical Considerations in Removing Black Box Warnings from Drug Labels.

    Science.gov (United States)

    Yeh, James S; Sarpatwari, Ameet; Kesselheim, Aaron S

    2016-08-01

    Boxed warnings-also known as "black box" warnings-can be a powerful tool in communicating drug risks to physicians and patients. The overall number of boxed warnings has grown in recent years as the US Food and Drug Administration (FDA) has approved more drugs on the basis of limited pre-marketing information and as new safety issues for marketed drugs have been identified. Two recent manufacturers' petitions to remove boxed warnings on the drugs rosiglitazone (Avandia) and varenicline (Chantix) have led to divergent FDA decisions and revealed different considerations involved in boxed warning imposition and removal. For ethical and practical reasons, the FDA is justified in applying a higher standard for boxed warning removal than for imposition, as removal of a boxed warning may have unintended effects on physician and patient behavior. However, no guidelines on boxed warning removal currently exist. To promote safe use of approved prescription drugs, the FDA should adopt a uniform and transparent process governing decisions to impose or remove boxed warnings. PMID:27000800

  3. Crosstalk Enhancement in 32 nm FD SOI MOSFET using HR Substrate and Multilayer BOX

    Directory of Open Access Journals (Sweden)

    Parisa Tavanazadeh

    2011-06-01

    Full Text Available In this paper, the crosstalk in 32 nm UTB SOI MOSFET is examined by using a new structure, a high resistivity substrate, and a multilayer BOX (SiO2-Diamond. The electrical and thermal characteristics of the conventional SOI and a multilayer BOX SOI are compared, and it is concluded that parasitic capacitances and crosstalk are improved by incorporating multilayer BOX to a HR Substrate. In a conventional HR FD SOI, crosstalk is approximately -121dB, while by incorporating multilayer BOX substrate and increasing the thickness of the Diamond to 100nm, crosstalk can be reduced by 20%.

  4. Two high-mobility group box domains act together to underwind and kink DNA

    Energy Technology Data Exchange (ETDEWEB)

    Sánchez-Giraldo, R.; Acosta-Reyes, F. J. [Universitat Politecnica de Catalunya, 08028 Barcelona (Spain); Malarkey, C. S. [University of Colorado School of Medicine, Aurora, CO 80045 (United States); Saperas, N. [Universitat Politecnica de Catalunya, 08028 Barcelona (Spain); Churchill, M. E. A., E-mail: mair.churchill@ucdenver.edu [University of Colorado School of Medicine, Aurora, CO 80045 (United States); Campos, J. L., E-mail: mair.churchill@ucdenver.edu [Universitat Politecnica de Catalunya, 08028 Barcelona (Spain)

    2015-06-30

    The crystal structure of HMGB1 box A bound to an unmodified AT-rich DNA fragment is reported at a resolution of 2 Å. A new mode of DNA recognition for HMG box proteins is found in which two box A domains bind in an unusual configuration generating a highly kinked DNA structure. High-mobility group protein 1 (HMGB1) is an essential and ubiquitous DNA architectural factor that influences a myriad of cellular processes. HMGB1 contains two DNA-binding domains, box A and box B, which have little sequence specificity but have remarkable abilities to underwind and bend DNA. Although HMGB1 box A is thought to be responsible for the majority of HMGB1–DNA interactions with pre-bent or kinked DNA, little is known about how it recognizes unmodified DNA. Here, the crystal structure of HMGB1 box A bound to an AT-rich DNA fragment is reported at a resolution of 2 Å. Two box A domains of HMGB1 collaborate in an unusual configuration in which the Phe37 residues of both domains stack together and intercalate the same CG base pair, generating highly kinked DNA. This represents a novel mode of DNA recognition for HMGB proteins and reveals a mechanism by which structure-specific HMG boxes kink linear DNA.

  5. Box traps on an atom chip for one-dimensional quantum gases

    CERN Document Server

    van Es, J J P; van Amerongen, A H; Rétif, C; Whitlock, S; van Druten, N J

    2009-01-01

    We present the implementation of tailored trapping potentials for ultracold gases on an atom chip. We realize highly elongated traps with box-like confinement along the long, axial direction combined with conventional harmonic confinement along the two radial directions. The design, fabrication and characterization of the atom chip and the box traps is described. We load ultracold ($\\lesssim1 \\mu$K) clouds of $^{87}$Rb in a box trap, and demonstrate Bose-gas focusing as a means to characterize these atomic clouds in arbitrarily shaped potentials. Our results show that box-like axial potentials on atom chips are very promising for studies of one-dimensional quantum gases.

  6. An analytical tool-box for comprehensive biochemical, structural and transcriptome evaluation of oral biofilms mediated by mutans streptococci.

    Science.gov (United States)

    Klein, Marlise I; Xiao, Jin; Heydorn, Arne; Koo, Hyun

    2011-01-25

    specific experimental conditions to demonstrate the usefulness and flexibility of the tool-box. The biofilm model is simple, reproducible and multiple replicates of a single experiment can be done simultaneously (4, 5). Moreover, it allows temporal evaluation, inclusion of various microbial species (5) and assessment of the effects of distinct experimental conditions (e.g. treatments (6); comparison of knockout mutants vs. parental strain (5); carbohydrates availability (7)). Here, we describe two specific components of the tool-box, including (i) new software for microarray data mining/organization (MDV) and fluorescence imaging analysis (DUOSTAT), and (ii) in situ EPS-labeling. We also provide an experimental case showing how the tool-box can assist with biofilms analysis, data organization, integration and interpretation.

  7. Column Reordering for Box-Constrained Integer Least Squares Problems

    CERN Document Server

    Breen, Stephen

    2012-01-01

    The box-constrained integer least squares problem (BILS) arises in MIMO wireless communications applications. Typically a sphere decoding algorithm (a tree search algorithm) is used to solve the problem. In order to make the search algorithm more efficient, the columns of the channel matrix in the BILS problem have to be reordered. To our knowledge, there are currently two algorithms for column reordering that provide the best known results. Both use all available information, but they were derived respectively from geometric and algebraic points of view and look different. In this paper we modify one to make it more computationally efficient and easier to comprehend. Then we prove the modified one and the other actually give the same column reordering in theory. Finally we propose a new mathematically equivalent algorithm, which is more computationally efficient and is still easy to understand.

  8. Packing Boxes into Multiple Containers Using Genetic Algorithm

    Science.gov (United States)

    Menghani, Deepak; Guha, Anirban

    2016-07-01

    Container loading problems have been studied extensively in the literature and various analytical, heuristic and metaheuristic methods have been proposed. This paper presents two different variants of a genetic algorithm framework for the three-dimensional container loading problem for optimally loading boxes into multiple containers with constraints. The algorithms are designed so that it is easy to incorporate various constraints found in real life problems. The algorithms are tested on data of standard test cases from literature and are found to compare well with the benchmark algorithms in terms of utilization of containers. This, along with the ability to easily incorporate a wide range of practical constraints, makes them attractive for implementation in real life scenarios.

  9. The Planck/LFI Radiometer Electronics Box Assembly

    CERN Document Server

    Herreros, J M; Rebolo, R; Chulani, H; Rubino-Martin, J A; Hildebrandt, S R; Bersanelli, M; Butler, R C; Miccolis, M; Pena, A; Pereira, M; Torrero, F; Franceschet, C; Lopez, M; Alcala, C; 10.1088/1748-0221/4/12/T12008

    2010-01-01

    The Radiometer Electronics Box Assembly (REBA) is the control and data processing on board computer of the Low Frequency Instrument (LFI) of the Planck mission (ESA). The REBA was designed and built incorporating state of the art processors, communication interfaces and real time operating system software in order to meet the scientific performance of the LFI. We present a technical summary of the REBA, including a physical, functional, electrical, mechanical and thermal description. Aspects of the design and development, the assembly, the integration and the verification of the equipment are provided. A brief description of the LFI on board software is given including the Low-Level Software and the main functionalities and architecture of the Application Software. The compressor module, which has been developed as an independent product, later integrated in the application, is also described in this paper. Two identical engineering models EM and AVM, the engineering qualification model EQM, the flight model ...

  10. Motivating crowding theory - opening the black box of intrinsic motivation

    DEFF Research Database (Denmark)

    Jacobsen, Christian Bøtcher

    2010-01-01

    employees. Motivation crowding theory claims that this may be at the expense of intrinsic motivation, if the extrinsic motivation factor is perceived to be controlling. On the other hand, intrinsic motivation will be enhanced (crowded in), if the extrinsic motivation factor is perceived to be supportive....... Studies have found support for the motivation crowding claim, but have neglected intrinsic motivation. This study opens the black box of intrinsic motivation and finds a meaningful distinction between task motivation and public service motivation. Among 2,772 physiotherapists in the Danish public sector......, monetary incentives are found to cause different crowding effects for these different types of intrinsic motivation. The results call for more theoretical work on the drivers of motivation crowding effects and for practitioners to pay more attention to what type of intrinsic motivation is at stake, when...

  11. Workshop energy-efficiency of set-top boxes

    Energy Technology Data Exchange (ETDEWEB)

    Grieder, T.

    2005-07-01

    This short final report for the Swiss Federal Office of Energy (SFOE) presents a review of the findings of two workshops held on the subject of the power consumption of 'set-top boxes' used for the reception of digitally transmitted media. The report estimates that these could cause an up to 1% increase in electricity consumption. The conclusions of the workshops, which were attended by representatives of importers and service providers active in this sector, are presented in graphical form. The main results include recommendations that the European Code of Conduct should be adopted and that retailers should be involved in any actions taken. The situation in Europe is commented on and the importance of customer information is stressed.

  12. Dynamic Magnification Factor in a Box-Shape Steel Girder

    Science.gov (United States)

    Rahbar-Ranji, A.

    2014-01-01

    The dynamic effect of moving loads on structures is treated as a dynamic magnification factor when resonant is not imminent. Studies have shown that the calculated magnification factors from field measurements could be higher than the values specified in design codes. It is the main aim of present paper to investigate the applicability and accuracy of a rule-based expression for calculation of dynamic magnification factor for lifting appliances used in marine industry. A steel box shape girder of a crane is considered and transient dynamic analysis using computer code ANSYS is implemented. Dynamic magnification factor is calculated for different loading conditions and compared with rule-based equation. The effects of lifting speeds, acceleration, damping ratio and position of cargo are examined. It is found that rule-based expression underestimate dynamic magnification factor.

  13. One-dimensional quasi-relativistic particle in the box

    CERN Document Server

    Kaleta, Kamil; Malecki, Jacek

    2011-01-01

    Two-term Weyl-type asymptotic law for the eigenvalues of one-dimensional quasi-relativistic Hamiltonian (-h^2 c^2 d^2/dx^2 + m^2 c^4)^(1/2) + V_well(x) (the Klein-Gordon square-root operator with electrostatic potential) with the infinite square well potential V_well(x) is given: the n-th eigenvalue is equal to (n pi/2 - pi/8) h c/a + O(1/n), where 2a is the width of the potential well. Simplicity of eigenvalues is proved. Some L^2 and L^infinity properties of eigenfunctions are also studied. Eigenvalues represent energies of a `massive particle in the box' quasi-relativistic model.

  14. Accuracy of the box-counting algorithm for noisy fractals

    CERN Document Server

    Gorski, A Z; Oswiecimka, P; Skrzat, J

    2014-01-01

    The box-counting (BC) algorithm is applied to calculate fractal dimensions of four fractal sets. The sets are contaminated with an additive noise with amplitude $\\gamma = 10^{-5} \\div 10^{-1}$. The accuracy of calculated numerical values of the fractal dimensions is analyzed as a function of $\\gamma$ for different sizes of the data sample ($n_{tot}$). In particular, it has been found that a tiny ($10^{-5}$) addition of noise generates much larger (three orders of magnitude) error of the calculated fractal exponents. Natural saturation of the error for larger noise values prohibits the power-like scaling. Moreover, the noise effect cannot be cured by taking larger data samples.

  15. Spontaneous symmetry breaking in a split potential box

    Science.gov (United States)

    Shamriz, Elad; Dror, Nir; Malomed, Boris A.

    2016-08-01

    We report results of an analysis of the spontaneous symmetry breaking (SSB) in a basic (actually, simplest) model that is capable of producing the SSB phenomenology in a one-dimensional setting. It is based on the Gross-Pitaevskii-nonlinear Schrödinger equation with the cubic self-attractive term and a double-well potential built as an infinitely deep potential box split by a narrow (δ functional) barrier. The barrier's strength ɛ is the single free parameter of the scaled form of the model. It may be implemented in atomic Bose-Einstein condensates and nonlinear optics. The SSB bifurcation of the symmetric ground state (g.s.) is predicted analytically in two limit cases, viz., for deep or weak splitting of the potential box by the barrier (ɛ ≫1 or ɛ ≪1 , respectively). For the generic case, a variational approximation (VA) is elaborated. The analytical findings are presented along with systematic numerical results. The stability of stationary states is studied through the calculation of eigenvalues for small perturbations and by means of direct simulations. The g.s. always undergoes the SSB bifurcation of the supercritical type, as predicted by the VA at moderate values of ɛ , although the VA fails at small ɛ , due to inapplicability of the underlying ansatz in that case. However, the latter case is correctly treated by the approximation based on a soliton ansatz. On top of the g.s., the first and second excited states are studied too. The antisymmetric mode (the first excited state) is destabilized at a critical value of its norm. The second excited state undergoes SSB bifurcation, like the g.s., but, unlike it, the bifurcation produces an unstable asymmetric mode. All unstable modes tend to spontaneously reshape into the asymmetric g.s.

  16. Making the weight: a case study from professional boxing.

    Science.gov (United States)

    Morton, James P; Robertson, Colin; Sutton, Laura; MacLaren, Don P M

    2010-02-01

    Professional boxing is a combat sport categorized into a series of weight classes. Given the sport's underpinning culture, boxers' typical approach to "making weight" is usually via severe acute and/or chronic energy restriction and dehydration. Such practices have implications for physical performance and also carry health risks. This article provides a case-study account outlining a more structured and gradual approach to helping a professional male boxer make weight for the 59-kg superfeatherweight division. Over a 12-week period, the client athlete adhered to a daily diet approximately equivalent to his resting metabolic rate (6-7 MJ; 40% carbohydrate, 38% protein, 22% fat). Average body-mass loss was 0.9 + or - 0.4 kg/wk, equating to a total loss of 9.4 kg. This weight loss resulted in a decrease in percent body fat from 12.1% to 7.0%. In the 30 hr between weigh-in and competition, the client consumed a high-carbohydrate diet (12 g/kg body mass) supported by appropriate hydration strategies and subsequently entered the ring at a fighting weight of 63.2 kg. This nutritional strategy represented a major change in the client's habitual weight-making practices and did not rely on any form of intended dehydration during the training period or before weighing in. The intervention demonstrates that a more gradual approach to making weight in professional boxing can be successfully achieved via a combination of restricted energy intake and increased energy expenditure, providing there is willingness on the part of the athlete and coaches involved to adopt novel practices.

  17. Thinking out of the box: the unpacking experience of consumer electronics products

    NARCIS (Netherlands)

    Wever, R.; Del Castillo C., A.

    2006-01-01

    Due to developments in the consumer electronics (CE) market, as tougher competition, low brand loyalty, and the rise of discount retail formats, the communication value of the product packaging is increasingly important. The packaging has to sell the product, through attracting attention, communicat

  18. Serum induced degradation of 3D DNA box origami observed by high speed atomic force microscope

    DEFF Research Database (Denmark)

    Jiang, Zaixing; Zhang, Shuai; Yang, Chuanxu;

    2015-01-01

    DNA box origami in serum using high-speed atomic force microscope optimized for imaging 3D DNA origami in real time. The time resolution allows characterizing the stages of serum effects on individual 3D DNA box origami with nanometer resolution. Our results indicate that the whole digest process...

  19. Development with age of nest box use and gregarious nesting in laying hens

    DEFF Research Database (Denmark)

    Riber, Anja Brinch

    2010-01-01

    in position (left + corner, middle, and right). Nesting behaviour was video recorded for 5 days in each of five distinct periods: age 20, 26, 32, 38, and 44 weeks. The total number of visits and the number of gregarious visits were higher in the left nest box than in the other two nest boxes at all ages...

  20. The Inside-Out Box: An Analysis of Structures and Space.

    Science.gov (United States)

    Fowler, Marilyn L.

    1996-01-01

    Describes an activity for children of any age to develop spatial sense and explore the effects of transforming, combining, subdividing, and changing geometric figures. Students analyze empty cereal boxes opened flat to determine the specific shape, how it opens and closes, to check maps or sketches against the actual geometry of the box, and write…

  1. Teacher's Guide to Animal Camouflage: The MATCH Box Project; Prototype Edition.

    Science.gov (United States)

    Standring, Gillian; Bernath, Robert

    The Materials and Activities for Teachers and Children (MATCH Box) project was developed in 1965 to provide for the relatively intensive treatment of a subject over a short period through materials geared to the elementary school level. Each MATCH Box contains materials, equipment, and activities that work together to foster the teaching/learning…

  2. The effect of box shape on the dynamic properties of proteins simulated under periodic boundary conditions

    NARCIS (Netherlands)

    Wassenaar, T.A.; Mark, A.E.

    2006-01-01

    The effect of the box shape on the dynamic behavior of proteins simulated under periodic boundary conditions is evaluated. In particular, the influence of simulation boxes defined by the near-densest lattice packing (NDLP) in conjunction with rotational constraints is compared to that of standard bo

  3. 77 FR 39547 - Self-Regulatory Organizations; BOX Options Exchange LLC; Notice of Filing and Immediate...

    Science.gov (United States)

    2012-07-03

    ...\\ \\5\\ See Securities Exchange Act Release No. 66871 (April 27, 2012) 77 FR 26323 (May 3, 2012) (File 10... Effectiveness of Proposed Rule To Amend the BOX Options Exchange LLC Limited Liability Company Agreement and the BOX Holdings Group LLC Limited Liability Company Agreement June 27, 2012. Pursuant to Section...

  4. Functional and evolutionary studies of type I MADS box genes in Petunia hybrida and arabidopsis thaliana

    NARCIS (Netherlands)

    Bemer, Marian

    2008-01-01

    MADS-box genes are very important for plant development and especially for the formation of the flower. The MADS box family of transcription factors in plants can be subdivided into two classes: the MIKC-type genes, which play essential roles in flower formation, and the type I genes, which are func

  5. 49 CFR 215.109 - Defective plain bearing box: Journal lubrication system.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Defective plain bearing box: Journal lubrication... Freight Car Components Suspension System § 215.109 Defective plain bearing box: Journal lubrication system...) Metal parts contacting the journal; or (e) Is— (1) Missing; or (2) Not in contact with the journal....

  6. Forkhead box transcription factors in embryonic heart development and congenital heart disease.

    Science.gov (United States)

    Zhu, Hong

    2016-01-01

    Embryonic heart development is a very complicated process regulated precisely by a network composed of many genes and signaling pathways in time and space. Forkhead box (Fox, FOX) proteins are a family of transcription factors characterized by the presence of an evolutionary conserved "forkhead"or "winged-helix" DNA-binding domain and able to organize temporal and spatial gene expression during development. They are involved in a wide variety of cellular processes, such as cell cycle progression, proliferation, differentiation, migration, metabolism and DNA damage response. An abundance of studies in model organisms and systems has established that Foxa2, Foxc1/c2, Foxh1 and Foxm1, Foxos and Foxps are important components of the signaling pathways that instruct cardiogenesis and embryonic heart development, playing paramount roles in heart development. The previous studies also have demonstrated that mutations in some of the forkhead box genes and the aberrant expression of forkhead box gene are heavily implicated in the congenital heart disease (CHD) of humans. This review primarily focuses on the current understanding of heart development regulated by forkhead box transcription factors and molecular genetic mechanisms by which forkhead box factors modulate heart development during embryogenesis and organogenesis. This review also summarizes human CHD related mutations in forkhead box genes as well as the abnormal expression of forkhead box gene, and discusses additional possible regulatory mechanisms of the forkhead box genes during embryonic heart development that warrant further investigation.

  7. Industrial X-ray tomography using an electron beam welding box

    CERN Document Server

    Hoppe, D; Koch, D; Zippe, C

    2002-01-01

    An existing electron beam welding box should be used with the least additional effort for X-ray tomography. Only a suitable anode, a simple device to turn the investigated object and one detector for X-rays are placed into the vacuum of the welding box. The information necessary to reconstruct tomograms should be derived only from the measurand of the detector.

  8. Optical and near-infrared observations of the GRB 970616 error box

    DEFF Research Database (Denmark)

    Gorosabel, J.; Castro-Tirado, A.J.; Pedersen, Henrik;

    1999-01-01

    We report on near-infrared and optical observations of the GRB 970616 error box and of the X-ray sources discovered by ASCA and ROSAT in the region. No optical transient was found either within the IPN band or in the X-ray error boxes, similarly to other bursts, and we suggest that either...

  9. Quasi-static vapor pressure measurements on reactive systems in inert atmosphere box

    Science.gov (United States)

    Fischer, A. K.

    1968-01-01

    Apparatus makes vapor pressure measurements on air-sensitive systems in an inert atmosphere glove box. Once the apparatus is loaded with the sample and all connections made, all measuring operations may be performed outside the box. The apparatus is a single-tube adaptation of the double-tube quasi-static technique.

  10. A Smoothing Newton Method for the Box Constrained Variational Inequality Problems

    Institute of Scientific and Technical Information of China (English)

    XIE Ya-jun; MA Chang-feng

    2012-01-01

    The box constrained variational inequality problem can be reformulated as a nonsmooth equation by using median operator.In this paper,we present a smoothing Newton method for solving the box constrained variational inequality problem based on a new smoothing approximation function.The proposed algorithm is proved to be well defined and convergent globally under weaker conditions.

  11. Sex Differences in a Human Analogue of the Radial Arm Maze: The ''17-Box Maze Test''

    Science.gov (United States)

    Rahman, Q.; Abrahams, S.; Jussab, F.

    2005-01-01

    This study investigated sex differences in spatial memory using a human analogue of the Radial Arm Maze: a revision on the Nine Box Maze originally developed by Abrahams, Pickering, Polkey, and Morris (1997) called the 17-Box Maze Test herein. The task encourages allocentric spatial processing, dissociates object from spatial memory, and…

  12. Structure and biochemical function of a prototypical Arabidopsis U-box domain

    DEFF Research Database (Denmark)

    Andersen, Pernille; Kragelund, Birthe B; Olsen, Addie N;

    2004-01-01

    U-box proteins, as well as other proteins involved in regulated protein degradation, are apparently over-represented in Arabidopsis compared with other model eukaryotes. The Arabidopsis protein AtPUB14 contains a typical U-box domain followed by an Armadillo repeat region, a domain organization...

  13. Smocks and Jocks outside the Box: The Paradigmatic Evolution of Sport and Exercise Psychology

    Science.gov (United States)

    Vealey, Robin S.

    2006-01-01

    The objective of this article is to describe the historical development of sport and exercise psychology, with a particular emphasis on the construction and evolution of the "box" through history. The box represents the dominant paradigm that serves as the model for research and application as it evolves through successive historical eras (Kuhn,…

  14. Specific Heat of Helium in 2 μm3 Boxes, Coupled or Uncoupled?

    International Nuclear Information System (INIS)

    We report on recent measurements of the specific heat of helium confined in pill-boxes 2 μm across and 2 μm deep made lithographically on a silicon wafer. The experimental cells distribute liquid from a bulk reservoir to ∼ 108 boxes by an array of very shallow fill-channels (0.019 μm and 0.010 μm) which represent a negligible volume compared to that of the boxes. Since the channels are so shallow, the helium in them becomes superfluid at a much lower temperature than the liquid in the boxes. Therefore, during the course of the heat capacity measurements, the liquid in the channels in always normal, and the cell would be expected to behave as a system of uncoupled boxes. We compare these measurements with one previously made of a cell where the confinement was to 1 μm boxes with an equivalent fill arrangement. While the shift in the position of the specific heat maximum relative to the 1 μm cell is what one would expect on the basis of finite-size scaling, there are discrepancies in the specific heat amplitude between the 2 μm cell utilizing different depth fill-channels, and with the 1 μm cell. It is possible that the channels, even though normal and of negligible volume, provide a weak coupling between the boxes leading to a collective rather than single-box behavior

  15. Characterisation of a New Joining Structure for Application to Shielding Boxes Made of Conductive Plastics

    OpenAIRE

    Catrysse, Johan; Vanhee, Filip; Pissoort, Davy; Dewitte, Rik; Hellert, Dieter

    2010-01-01

    When using shielding boxes made of conductive plastics, the main problem is how to contact both parts of the box in a conductive way. A new low-cost joining structure has been developed and characterised. Both the joining structure as the characterisation method and procedure are discussed in this paper.

  16. Design of a shaking table test box for a subway station structure in soft soil

    Institute of Scientific and Technical Information of China (English)

    YANG Linde; JI Qianqian; ZHENG Yonglai; YANG Chao; ZHANG Dongliang

    2007-01-01

    A reasonable choice of structure of a model box is significant for a shaking table test to be successful in geo- technical engineering. A model box has been designed for the shaking table test of a subway station structure in the soft soil of Shanghai in the paper. The reasonable geometric similarity scale of the subway station structure has been determined by a 3-D dynamic analysis under the action of lateral equiva- lent static loading. The shape, size and structure of the model box are chosen by considering all the involved factors comprehensively. The shape of the box is similar to that of a typical station structure, and the ratio between the plane dimension of the model ground and that of the model struc- ture is big enough to reduce the influence of boundary condi- tion effectively. The structure is strong enough to avoid being demolished by shaking during a test. The contact conditions between the model soil and box are clear to help the data gained from the test well fit that from numerical analysis. The total weight of the model soil and box is less than the bearing capacity of the shaking table apparatus and there is no reso- nance between the model soil and box. The results show that the model box can be used to simulate the dynamic response of a subway station structure very well, so it provides a firm foundation for the success of the shaking table test of a subway station structure.

  17. Norm scores of the box and block test for children ages 3-10 years

    NARCIS (Netherlands)

    Jongbloed-Pereboom, M.; Nijhuis-Van der Sanden, M.W.G.; Steenbergen, B.

    2013-01-01

    This study provides new norm scores for the Box and Block Test for gross manual dexterity in children ages 3-10 yr. Two hundred fifteen Dutch children performed the Box and Block Test separately with each hand. We found an age effect for the scores; older children obtained higher scores than younger

  18. Norm Scores of the Box and Block Test for Children Ages 3-10 Years

    NARCIS (Netherlands)

    Jongbloed-Pereboom, M.; Nijhuis-Van der Sanden, M.W.G.; Steenbergen, B.

    2013-01-01

    This study provides new norm scores for the Box and Block Test for gross manual dexterity in children ages 3-10 yr. Two hundred fifteen Dutch children performed the Box and Block Test separately with each hand. We found an age effect for the scores; older children obtained higher scores than younger

  19. Arrival of the cold box for the cryogenic refrigeration plant and installation in building SHL5.

    CERN Multimedia

    Goran Perinic

    2002-01-01

    The pictures show the arrival of the cold box and the installation of both the cold box and the valve panel in building SHL5. The installation was achieved by lowering the components through an opening in the roof which had been specially forseen for this operation.

  20. Word Boxes Help Children with Learning Disabilities Identify and Spell Words.

    Science.gov (United States)

    Joseph, Laurice M.

    1999-01-01

    Describes Marie Clay's word boxes that help children attend to phonological and orthographic features of words, developing phonemic awareness and improving word recognition and spelling. Describes a study showing that the use of word boxes with several elementary school students with learning disabilities was effective for improving and…

  1. Exploring the "Black Box" of Programming: Applying Systematic Implementation Evaluation to a Structured Camp Curriculum

    Science.gov (United States)

    Mainieri, Tracy L.; Anderson, Denise M.

    2015-01-01

    Camp scholars have designed structured curricula to engender specific outcomes and to break down the "black box" of programming. Implementation evaluation explores how well a program operates when delivered, further breaking down the black box. The purpose of this study was to explore the implementation of a new structured camp…

  2. Analysis of Data on Xanthan Fermentation in Stationary Phase Using Black Box and Metabolic Network Models

    Institute of Scientific and Technical Information of China (English)

    马红武; 赵学明; 唐寅杰

    1999-01-01

    The xanthan fermentation data in the stationary phase was analyzed using the black box and the metabolic network models. The data consistency ls checked through the elemental balance in the black box model. In the metabolic network model, the metabolic flux distribution in the cell is calculated using the metabolic flux analysis method, then the maintenance coefficients is calculated.

  3. Augmented twin-nonlinear two-box behavioral models for multicarrier LTE power amplifiers.

    Science.gov (United States)

    Hammi, Oualid

    2014-01-01

    A novel class of behavioral models is proposed for LTE-driven Doherty power amplifiers with strong memory effects. The proposed models, labeled augmented twin-nonlinear two-box models, are built by cascading a highly nonlinear memoryless function with a mildly nonlinear memory polynomial with cross terms. Experimental validation on gallium nitride based Doherty power amplifiers illustrates the accuracy enhancement and complexity reduction achieved by the proposed models. When strong memory effects are observed, the augmented twin-nonlinear two-box models can improve the normalized mean square error by up to 3 dB for the same number of coefficients when compared to state-of-the-art twin-nonlinear two-box models. Furthermore, the augmented twin-nonlinear two-box models lead to the same performance as previously reported twin-nonlinear two-box models while requiring up to 80% less coefficients.

  4. [The design of heat dissipation of the field low temperature box for storage and transportation].

    Science.gov (United States)

    Wei, Jiancang; Suin, Jianjun; Wu, Jian

    2013-02-01

    Because of the compact structure of the field low temperature box for storage and transportation, which is due to the same small space where the compressor, the condenser, the control circuit, the battery and the power supply device are all placed in, the design for heat dissipation and ventilation is of critical importance for the stability and reliability of the box. Several design schemes of the heat dissipation design of the box were simulated using the FLOEFD hot fluid analysis software in this study. Different distributions of the temperature field in every design scheme were constructed intimately in the present study. It is well concluded that according to the result of the simulation analysis, the optimal heat dissipation design is decent for the field low temperature box for storage and transportation, and the box can operate smoothly for a long time using the results of the design. PMID:23488142

  5. Box Graphs and Resolutions II: From Coulomb Phases to Fiber Faces

    CERN Document Server

    Braun, Andreas P

    2015-01-01

    Box graphs, or equivalently Coulomb phases of three-dimensional N=2 supersymmetric gauge theories with matter, give a succinct, comprehensive and elegant characterization of crepant resolutions of singular elliptically fibered varieties. Furthermore, the box graphs predict that the phases are organized in terms of a network of flop transitions. The geometric construction of the resolutions associated to the phases is, however, a difficult problem. Here, we identify a correspondence between box graphs for the gauge algebras su(2k+1) with resolutions obtained using toric tops and generalizations thereof. Moreover, flop transitions between different such resolutions agree with those predicted by the box graphs. Our results thereby provide explicit realizations of the box graph resolutions.

  6. Heating Processes Of The Axle-Boxes Of Rolling-Stock On Railway Track Curves

    Directory of Open Access Journals (Sweden)

    Olegas Lunys

    2013-12-01

    Full Text Available The article deals with the heating process of the axle-boxes ofrolling stock when the train is in motion and discusses the forcesacting on the wheel-set when rolling stock moves along the trackcurves. The paper analyses scientific publications relevant tothe forces acting on the wheel-set of rolling stock and focuseson the axle-box heating process. The article also discusses theresults of theoretical studies on wheel-set forces that affect theheat exchange process of axle-boxes for a railway vehicle. Theresearch has determined a change in heating temperatures ofdifferent axle-boxes of rolling stock and reasons for their variationsand tendencies. The paper has estimated an effect of thetrain running along the track curves on the heating intensity ofthe axle-box. Finally, valid conclusions and recommendationshave been provided.

  7. Design and test of box girder for a large wind turbine blade

    DEFF Research Database (Denmark)

    Nielsen, Per Hørlyk; Tesauro, Angelo; Bitsche, Robert;

    This report is covering the structural design and full scale test of a box girder as a part of the project “Demonstration of new blade design using manufacturing process simulations” supported by the EUDP program. A box girder with a predetermined outer geometry was designed using new inventions...... that the manufacturing process could include the new inventions. Subsequently the box girder was transported to the blade test facility at DTU Wind Energy. A series of test was performed with the blade to investigate the behaviour during loading, and finally the girder was loaded to ultimate failure. The report includes......, which create an inner structure in the box girder. With a combination of advanced FEM analysis and the inventions it was possible to reduce the material thickness of the cap by up to 40%. The new design of the box girder was manufactured at SSP Technology A/S, where it was demonstrated...

  8. Box graphs and resolutions II: From Coulomb phases to fiber faces

    Directory of Open Access Journals (Sweden)

    Andreas P. Braun

    2016-04-01

    Full Text Available Box graphs, or equivalently Coulomb phases of three-dimensional N=2 supersymmetric gauge theories with matter, give a succinct, comprehensive and elegant characterization of crepant resolutions of singular elliptically fibered varieties. Furthermore, the box graphs predict that the phases are organized in terms of a network of flop transitions. The geometric construction of the resolutions associated to the phases is, however, a difficult problem. Here, we identify a correspondence between box graphs for the gauge algebras su(2k+1 with resolutions obtained using toric tops and generalizations thereof. Moreover, flop transitions between different such resolutions agree with those predicted by the box graphs. Our results thereby provide explicit realizations of the box graph resolutions.

  9. The radiation pattern of a monopole antenna attached to a conducting box

    Science.gov (United States)

    Chu, Andrew W. C.; Long, Stuart A.; Wilton, Donald R.

    1990-01-01

    A system investigation was undertaken to determine the radiation patterns of a monopole antenna mounted on a cubical conducting box over a ground plane. The effects of the location of the monopole and the electrical size of the box were compared with similar patterns measured over a flat ground plane and with numerically predicted values obtained from a method-of-moments patch code. It was concluded that the location at which a monopole antenna is mounted on a conducting box and the electrical size of the box clearly affect the overall radiation pattern of a monopole antenna. In general, mounting the antenna away from the center of the box will increase the depth of the nulls. In particular, planes will also increase the maximum E(phi) component of the field to the extent that it can become comparable to E(theta).

  10. View of the inner part of the VO prototype box. The WLS fibers wrapped up in teflon strips are coupled to connectors which ensure the passage of the light outside the box and its transfer in optical fibers.

    CERN Multimedia

    2004-01-01

    View of the inner part of the VO prototype box. The WLS fibers wrapped up in teflon strips are coupled to connectors which ensure the passage of the light outside the box and its transfer in optical fibers.

  11. Ectromelia virus encodes a family of Ankyrin/F-box proteins that regulate NFκB

    International Nuclear Information System (INIS)

    A notable feature of poxviruses is their ability to inhibit the antiviral response, including the nuclear factor kappa B (NFκB) pathway. NFκB is a transcription factor that is sequestered in the cytoplasm until cell stimulation, and relies on the SCF (Skp1, culllin-1, F-box) ubiquitin ligase to target its inhibitor, IκBα, for degradation. IκBα is recruited to the SCF by the F-box domain-containing protein βTrCP. Here, we show that ectromelia virus, the causative agent of mousepox, encodes four F-box-containing proteins, EVM002, EVM005, EVM154, and EVM165, all of which contain Ankyrin (Ank) domains. The Ank/F-box proteins inhibit NFκB nuclear translocation, and this inhibition is dependent on the F-box domain. We also demonstrate that EVM002, EVM005, EVM154, and EVM165 prevent IκBα degradation, suggesting that they target the SCF. This study identifies a new mechanism by which ectromelia virus inhibits NFκB. - Highlights: • Ectromelia virus encodes four Ank/F-box proteins, EVM002, EVM005, EVM154 and EVM165. • The Ank/F-box proteins inhibit NFκB nuclear translocation, dependent on the F-box. • The Ank/F-box proteins prevent IκBα degradation, suggesting they target the SCF. • Deletion of a single Ank/F-box gene from ECTV does not prevent viral NFκB inhibition. • This study identifies a new mechanism by which ectromelia virus inhibits NFκB

  12. Ectromelia virus encodes a family of Ankyrin/F-box proteins that regulate NFκB

    Energy Technology Data Exchange (ETDEWEB)

    Burles, Kristin, E-mail: burles@ualberta.ca; Buuren, Nicholas van; Barry, Michele

    2014-11-15

    A notable feature of poxviruses is their ability to inhibit the antiviral response, including the nuclear factor kappa B (NFκB) pathway. NFκB is a transcription factor that is sequestered in the cytoplasm until cell stimulation, and relies on the SCF (Skp1, culllin-1, F-box) ubiquitin ligase to target its inhibitor, IκBα, for degradation. IκBα is recruited to the SCF by the F-box domain-containing protein βTrCP. Here, we show that ectromelia virus, the causative agent of mousepox, encodes four F-box-containing proteins, EVM002, EVM005, EVM154, and EVM165, all of which contain Ankyrin (Ank) domains. The Ank/F-box proteins inhibit NFκB nuclear translocation, and this inhibition is dependent on the F-box domain. We also demonstrate that EVM002, EVM005, EVM154, and EVM165 prevent IκBα degradation, suggesting that they target the SCF. This study identifies a new mechanism by which ectromelia virus inhibits NFκB. - Highlights: • Ectromelia virus encodes four Ank/F-box proteins, EVM002, EVM005, EVM154 and EVM165. • The Ank/F-box proteins inhibit NFκB nuclear translocation, dependent on the F-box. • The Ank/F-box proteins prevent IκBα degradation, suggesting they target the SCF. • Deletion of a single Ank/F-box gene from ECTV does not prevent viral NFκB inhibition. • This study identifies a new mechanism by which ectromelia virus inhibits NFκB.

  13. MicroRNA regulation of F-box proteins and its role in cancer.

    Science.gov (United States)

    Wu, Zhao-Hui; Pfeffer, Lawrence M

    2016-02-01

    MicroRNAs (miRNAs) are small endogenous non-coding RNAs, which play critical roles in cancer development by suppressing gene expression at the post-transcriptional level. In general, oncogenic miRNAs are upregulated in cancer, while miRNAs that act as tumor suppressors are downregulated, leading to decreased expression of tumor suppressors and upregulated oncogene expression, respectively. F-box proteins function as the substrate-recognition components of the SKP1-CUL1-F-box (SCF)-ubiquitin ligase complex for the degradation of their protein targets by the ubiquitin-proteasome system. Therefore F-box proteins and miRNAs both negatively regulate target gene expression post-transcriptionally. Since each miRNA is capable of fine-tuning the expression of multiple target genes, multiple F-box proteins may be suppressed by the same miRNA. Meanwhile, one F-box proteins could be regulated by several miRNAs in different cancer types. In this review, we will focus on miRNA-mediated downregulation of various F-box proteins, the resulting stabilization of F-box protein substrates and the impact of these processes on human malignancies. We provide insight into how the miRNA: F-box protein axis may regulate cancer progression and metastasis. We also consider the broader role of F-box proteins in the regulation of pathways that are independent of the ubiquitin ligase complex and how that impacts on oncogenesis. The area of miRNAs and the F-box proteins that they regulate in cancer is an emerging field and will inform new strategies in cancer treatment.

  14. DLESE Teaching Box Pilot Project: Developing a Replicable Model for Collaboratively Creating Innovative Instructional Sequences Using Exemplary Resources in the Digital Library for Earth System Education (DLESE)

    Science.gov (United States)

    Weingroff, M.

    2004-12-01

    Before the advent of digital libraries, it was difficult for teachers to find suitable high-quality resources to use in their teaching. Digital libraries such as DLESE have eased the task by making high quality resources more easily accessible and providing search mechanisms that allow teachers to 'fine tune' the criteria over which they search. Searches tend to return lists of resources with some contextualizing information. However, teachers who are teaching 'out of discipline' or who have minimal training in science often need additional support to know how to use and sequence them. The Teaching Box Pilot Project was developed to address these concerns, bringing together educators, scientists, and instructional designers in a partnership to build an online framework to fully support innovative units of instruction about the Earth system. Each box integrates DLESE resources and activities, teaching tips, standards, concepts, teaching outcomes, reviews, and assessment information. Online templates and best practice guidelines are being developed that will enable teachers to create their own boxes or customize existing ones. Two boxes have been developed so far, one on weather for high school students, and one on the evidence for plate tectonics for middle schoolers. The project has met with significant enthusiasm and interest, and we hope to expand it by involving individual teachers, school systems, pre-service programs, and universities in the development and use of teaching boxes. A key ingredient in the project's success has been the close collaboration between the partners, each of whom has brought unique experiences, perspectives, knowledge, and skills to the project. This first effort involved teachers in the San Francisco Bay area, the University of California Museum of Paleontology, San Francisco State University, U.S. Geological Survey, and DLESE. This poster will allow participants to explore one of the teaching boxes. We will discuss how the boxes were

  15. Optimizing observational networks combining gliders, moored buoys and FerryBox in the Bay of Biscay and English Channel

    Science.gov (United States)

    Charria, Guillaume; Lamouroux, Julien; De Mey, Pierre

    2016-10-01

    Designing optimal observation networks in coastal oceans remains one of the major challenges towards the implementation of future efficient Integrated Ocean Observing Systems to monitor the coastal environment. In the Bay of Biscay and the English Channel, the diversity of involved processes (e.g. tidally-driven circulation, plume dynamics) requires to adapt observing systems to the specific targeted environments. Also important is the requirement for those systems to sustain coastal applications. Two observational network design experiments have been implemented for the spring season in two regions: the Loire River plume (northern part of the Bay of Biscay) and the Western English Channel. The method used to perform these experiments is based on the ArM (Array Modes) formalism using an ensemble-based approach without data assimilation. The first experiment in the Loire River plume aims to explore different possible glider endurance lines combined with a fixed mooring to monitor temperature and salinity. Main results show an expected improvement when combining glider and mooring observations. The experiment also highlights that the chosen transect (along-shore and North-South, cross-shore) does not significantly impact the efficiency of the network. Nevertheless, the classification from the method results in slightly better performances for along-shore and North-South sections. In the Western English Channel, a tidally-driven circulation system, added value of using a glider below FerryBox temperature and salinity measurements has been assessed. FerryBox systems are characterised by a high frequency sampling rate crossing the region 2 to 3 times a day. This efficient sampling, as well as the specific vertical hydrological structure (which is homogeneous in many sub-regions of the domain), explains the fact that the added value of an associated glider transect is not significant. These experiments combining existing and future observing systems, as well as numerical

  16. An Enhanced Box-Wing Solar Radiation pressure model for BDS and initial results

    Science.gov (United States)

    Zhao, Qunhe; Wang, Xiaoya; Hu, Xiaogong; Guo, Rui; Shang, Lin; Tang, Chengpan; Shao, Fan

    2016-04-01

    Solar radiation pressure forces are the largest non-gravitational perturbations acting on GNSS satellites, which is difficult to be accurately modeled due to the complicated and changing satellite attitude and unknown surface material characteristics. By the end of 2015, there are more than 50 stations of the Multi-GNSS Experiment(MGEX) set-up by the IGS. The simple box-plate model relies on coarse assumptions about the dimensions and optical properties of the satellite due to lack of more detailed information. So, a physical model based on BOX-WING model is developed, which is more sophisticated and more detailed physical structure has been taken into account, then calculating pressure forces according to the geometric relations between light rays and surfaces. All the MGEX stations and IGS core stations had been processed for precise orbit determination tests with GPS and BDS observations. Calculation range covers all the two kinds of Eclipsing and non-eclipsing periods in 2015, and we adopted the un-differential observation mode and more accurate values of satellite phase centers. At first, we tried nine parameters model, and then eliminated the parameters with strong correlation between them, came into being five parameters of the model. Five parameters were estimated, such as solar scale, y-bias, three material coefficients of solar panel, x-axis and z-axis panels. Initial results showed that, in the period of yaw-steering mode, use of Enhanced ADBOXW model results in small improvement for IGSO and MEO satellites, and the Root-Mean-Square(RMS) error value of one-day arc orbit decreased by about 10%~30% except for C08 and C14. The new model mainly improved the along track acceleration, up to 30% while in the radial track was not obvious. The Satellite Laser Ranging(SLR) validation showed, however, that this model had higher prediction accuracy in the period of orbit-normal mode, compared to GFZ multi-GNSS orbit products, as well with relative post

  17. Advances in the research of DEAD box 1 gene and tumor%DEAD box1基因与相关肿瘤的研究进展

    Institute of Scientific and Technical Information of China (English)

    曹巍; 金焰; 傅松滨

    2011-01-01

    DEAD box gene, DEAD box 1 ( DDX1 ) ,a gene mapping to the 2p24 region, was identified to be overexpressed in retinoblastoma and co-amplified with MYCN in neuroblastoma cell lines as well as in primary tumor specimens. DEAD box proteins are found in most organisms. As expected from the presence of the helicase domain, DDX 1 shows in vitro ATPase and RNA helicase activities. The exact function of DDX 1 and its role in the pathogenesis of cancer are still under investigation. Here, we review the DEAD box proteins family and the relationships with between DEAD box1 gene and tumor.%DEAD box基因,DEAD box 1(DDX1),位于染色体2p24,过表达于视网膜母细胞瘤(retinoblastoma,RB)中,并与MYCN基因共同扩增在神经母细胞瘤(neuroblastoma,NB)和原发性肿瘤的细胞系中.最近研究发现在鼠的子宫内膜癌细胞中DDX1基因与MYCN基因共同扩增.经研究发现在多数生物体中都存在DEAD box蛋白.正如我们所意料,DDX1存在解旋酶区域,在体外DDX1蛋白表现有ATP酶和解旋酶的活性.目前,DDX1确切的功能和在肿瘤中的作用还在进一步的研究当中.现将DEAD box蛋白家族和DEAD box 1基因与肿瘤的关系进行综述.

  18. On the susceptibility of the box tree moth Cydalima perspectalis to Anagrapha falcifera nucleopolyhedrovirus (AnfaNPV).

    Science.gov (United States)

    Rose, Jana; Kleespies, Regina G; Wang, Yongjie; Wennmann, Jörg T; Jehle, Johannes A

    2013-07-01

    The box tree moth Cydalima perspectalis is an invasive insect pest in many European countries. Caterpillars of this species cause widespread damage on box tree plants. In this study, a new opportunity to control this pest with the baculovirus Anagrapha falcifera nucleopolyhedrovirus (AnfaNPV) was investigated. Initially, AnfaNPV was identified to infect larvae of Diaphania nitidalis by determining the partial nucleotide sequence of the three highly conserved genes polh, lef-8 and lef-9 of the infection causing agent. Two AnfaNPV isolates, termed Dn10 and BI-235, were then propagated in larvae of C. perspectalis and purified by sucrose density centrifugation. A bioassay using leaf disks of box tree was established to evaluate the virulence of both AnfaNPV isolates to neonate C. perspectalis larvae. After 7days, the mortality of larvae was scored and median lethal concentrations (LC50) were determined to 7.8×10(5)OBs/ml for isolate BI-235 and 2.3×10(6)OBs/ml for isolate Dn10 by using probit analysis. Thus, AnfaNPV BI-235 was significantly more virulent to neonate C. perspectalis larvae than Dn10 based on a three times higher LC50 value. Additionally, light and transmission electron microscopic investigations verified high rates of infection in fat body, epidermis and tracheal matrix of C. perspectalis by both AnfaNPV isolates BI-235 and Dn10. In conclusion, the performed laboratory experiments indicate the susceptibility of C. perspectalis to AnfaNPV.

  19. Enhanced lines and box-shaped features in the gamma-ray spectrum from annihilating dark matter in the NMSSM

    Science.gov (United States)

    Cerdeño, D. G.; Peiró, M.; Robles, S.

    2016-04-01

    We study spectral features in the gamma-ray emission from dark matter (DM) annihilation in the Next-to-Minimal Supersymmetric Standard Model (NMSSM), with either neutralino or right-handed (RH) sneutrino DM . We perform a series of scans over the NMSSM parameter space, compute the DM annihilation cross section into two photons and the contribution of box-shaped features, and compare them with the limits derived from the Fermi-LAT search for gamma-ray lines using the latest Pass 8 data. We implement the LHC bounds on the Higgs sector and on the masses of supersymmetric particles as well as the constraints on low-energy observables. We also consider the recent upper limits from the Fermi-LAT satellite on the continuum gamma-ray emission from dwarf spheroidal galaxies (dSphs). We show that in the case of the RH sneutrino the constraint on gamma-ray spectral features can be more stringent than the dSph bounds. This is due to the Breit-Wigner enhancement near the ubiquitous resonances with a CP even Higgs and the contribution of scalar and pseudoscalar Higgs final states to box-shaped features. By contrast, for neutralino DM, the di-photon final state is only enhanced in the resonance with a Z boson and box-shaped features are even more suppressed. Therefore, the observation of spectral features could constitute a discriminating factor between both models. In addition, we compare our results with direct DM searches, including the SuperCDMS and LUX limits on the elastic DM-nucleus scattering cross section and show that some of these scenarios would be accessible to next generation experiments. Thus, our findings strengthen the idea of complementarity among distinct DM search strategies.

  20. On the susceptibility of the box tree moth Cydalima perspectalis to Anagrapha falcifera nucleopolyhedrovirus (AnfaNPV).

    Science.gov (United States)

    Rose, Jana; Kleespies, Regina G; Wang, Yongjie; Wennmann, Jörg T; Jehle, Johannes A

    2013-07-01

    The box tree moth Cydalima perspectalis is an invasive insect pest in many European countries. Caterpillars of this species cause widespread damage on box tree plants. In this study, a new opportunity to control this pest with the baculovirus Anagrapha falcifera nucleopolyhedrovirus (AnfaNPV) was investigated. Initially, AnfaNPV was identified to infect larvae of Diaphania nitidalis by determining the partial nucleotide sequence of the three highly conserved genes polh, lef-8 and lef-9 of the infection causing agent. Two AnfaNPV isolates, termed Dn10 and BI-235, were then propagated in larvae of C. perspectalis and purified by sucrose density centrifugation. A bioassay using leaf disks of box tree was established to evaluate the virulence of both AnfaNPV isolates to neonate C. perspectalis larvae. After 7days, the mortality of larvae was scored and median lethal concentrations (LC50) were determined to 7.8×10(5)OBs/ml for isolate BI-235 and 2.3×10(6)OBs/ml for isolate Dn10 by using probit analysis. Thus, AnfaNPV BI-235 was significantly more virulent to neonate C. perspectalis larvae than Dn10 based on a three times higher LC50 value. Additionally, light and transmission electron microscopic investigations verified high rates of infection in fat body, epidermis and tracheal matrix of C. perspectalis by both AnfaNPV isolates BI-235 and Dn10. In conclusion, the performed laboratory experiments indicate the susceptibility of C. perspectalis to AnfaNPV. PMID:23562977

  1. 箱型吊杆的风致振动特性%WIND-INDUCED VIBRATION CHARACTERISTICS OF BOX SUSPENDER

    Institute of Scientific and Technical Information of China (English)

    刘慕广; 陈政清

    2013-01-01

    This paper discusses the aerodynamic performance of box suspender based on wind tunnel experiments, and the effect of turbulence flow on the aerodynamic characteristics of suspender is further studied. The suspenders with rectangular section could lead to vortex resonance and galloping instability, and the depth-to-width ratios have significant impact on vortex-induced vibrations but little effect on galloping. Turbulence flow mainly affects the onset wind speed and lock-in range of vortex resonance, but the turbulence effects on aerodynamic characteristics of box suspender are not always beneficial. The results of corresponding numerical simulation show that turbulent flow changes the Strouhal numbers and the force of vortex shedding to affect the vortex resonance characteristics of box suspenders.%该文通过风洞试验研究了箱型吊杆的风振特性,并进一步分析了紊流对吊杆气动性能的影响.箱型吊杆会发生涡振与驰振失稳,高宽比对涡振特性存在较显著影响,对改善驰振性能作用不大.紊流对箱型吊杆涡振起振风速及锁定区间有较大影响,但紊流的作用并不总是有利的.相应的数值模拟显示,紊流是通过改变结构的St数与涡脱力的大小来影响结构的涡振特性.

  2. Stark effect in a wedge-shaped quantum box

    CERN Document Server

    Reyes-Esqueda, J A; Castillo-Mussot, M; Vazquez, G J; Reyes-Esqueda, Jorge-Alejandro; Mendoza, Carlos I.; Castillo-Mussot, Marcelo del; Vazquez, Gerardo J.

    2005-01-01

    The effect of an external applied electric field on the electronic ground state energy of a quantum box with a geometry defined by a wedge is studied by carrying out a variational calculation. This geometry could be used as an approximation for a tip of a cantilever of an atomic force microscope. We study theoretically the Stark effect as function of the parameters of the wedge: its diameter, angular aperture and thickness; as well as function of the intensity of the external electric field applied along the axis of the wedge in both directions; pushing the carrier towards the wider or the narrower parts. A confining electronic effect, which is sharper as the wedge dimensions are smaller, is clearly observed for the first case. Besides, the sign of the Stark shift changes when the angular aperture is changed from small angles to angles theta>pi. For the opposite field, the electronic confinement for large diameters is very small and it is also observed that the Stark shift is almost independent with respect t...

  3. Shearing Box Simulations of the MRI in a Collisionless Plasma

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Prateek; Hammett, Gregory, W.; Quataert, Eliot; Stone, James, M.

    2005-08-31

    We describe local shearing box simulations of turbulence driven by the magnetorotational instability (MRI) in a collisionless plasma. Collisionless effects may be important in radiatively inefficient accretion flows, such as near the black hole in the Galactic Center. The MHD version of ZEUS is modified to evolve an anisotropic pressure tensor. A fluid closure approximation is used to calculate heat conduction along magnetic field lines. The anisotropic pressure tensor provides a qualitatively new mechanism for transporting angular momentum in accretion flows (in addition to the Maxwell and Reynolds stresses). We estimate limits on the pressure anisotropy due to pitch angle scattering by kinetic instabilities. Such instabilities provide an effective ''collision'' rate in a collisionless plasma and lead to more MHD-like dynamics. We find that the MRI leads to efficient growth of the magnetic field in a collisionless plasma, with saturation amplitudes comparable to those in MHD. In the saturated state, the anisotropic stress is comparable to the Maxwell stress, implying that the rate of angular momentum transport may be moderately enhanced in a collisionless plasma.

  4. Hazard Analysis for Building 34 Vacuum Glove Box Assembly

    Science.gov (United States)

    Meginnis, Ian

    2014-01-01

    One of the characteristics of an effective safety program is the recognition and control of hazards before mishaps or failures occur. Conducting potentially hazardous tests necessitates a thorough hazard analysis in order to prevent injury to personnel, and to prevent damage to facilities and equipment. The primary purpose of this hazard analysis is to define and address the potential hazards and controls associated with the Building 34 Vacuum Glove Box Assembly, and to provide the applicable team of personnel with the documented results. It is imperative that each member of the team be familiar with the hazards and controls associated with his/her particular tasks, assignments and activities while interfacing with facility test systems, equipment and hardware. In fulfillment of the stated purposes, the goal of this hazard analysis is to identify all hazards that have the potential to harm personnel, damage the facility or its test systems or equipment, test articles, Government or personal property, or the environment. This analysis may also assess the significance and risk, when applicable, of lost test objectives when substantial monetary value is involved. The hazards, causes, controls, verifications, and risk assessment codes have been documented on the hazard analysis work sheets in Appendix A of this document. The preparation and development of this report is in accordance with JPR 1700.1, "JSC Safety and Health Handbook" and JSC 17773 Rev D "Instructions for Preparation of Hazard Analysis for JSC Ground Operations".

  5. Compactness of $\\Box_b$ in a CR manifold

    CERN Document Server

    Khanh, Tran Vu; Zampieri, Giuseppe

    2011-01-01

    This note is aimed at simplifying current literature about compactness estimates for the Kohn-Laplacian on CR manifolds. The approach consists in a tangential basic estimate in the formulation given by the first author in \\cite{Kh10} which refines former work by Nicoara \\cite{N06}. It has been proved by Raich \\cite{R10} that on a CR manifold of dimension $2n-1$ which is compact pseudoconvex of hypersurface type embedded in $\\C^n$ and orientable, the property named "$(CR-P_q)$" for $1\\leq q\\leq \\frac{n-1}2$, a generalization of the one introduced by Catlin in \\cite{C84}, implies compactness estimates for the Kohn-Laplacian $\\Box_b$ in degree $k$ for any $k$ satisfying $q\\leq k\\leq n-1-q$. The same result is stated by Straube in \\cite{S10} without the assumption of orientability. We regain these results by a simplified method and extend the conclusions in two directions. First, the CR manifold is no longer required to be embedded. Second, when $(CR-P_q)$ holds for $q=1$ (and, in case $n=1$, under the additional...

  6. A CERN fireman becomes a world boxing champion

    CERN Multimedia

    Anaïs Schaeffer

    2012-01-01

    From 19 to 28 October, Sydney (Australia) welcomed thousands of firemen and women from all over the world for the 12th World Firefighters Games. Launched in 1990 in Auckland (New Zealand), this biennial celebration is – according to its organizers – “intended to be an inclusive event that celebrates the camaraderie, heroism, health, fitness and spirit of the women and men who work in one of the world’s most respected professions”.   This year, Craig Stevenson, who is member of the CERN Fire Brigade, took part in the competition. He went as far as winning the gold medal in the boxing championship, in the “under 75 kg” category. “This is my last year at CERN, and I wanted to do something special,” Craig explains. “I work with a lot of inspirational people, who have really made me want to achieve more.”  In order to compete in the “under 75 kg” category, Crai...

  7. SOx-NOx-Rox Box trademark demonstration project review

    International Nuclear Information System (INIS)

    The SOx-NOx-Rox Box trademark (SNRB trademark) process is a combined SOx, NOx and particulate (Rox) emission control technology developed by Babcock ampersand Wilcox in which high removal efficiencies for all three pollutants are achieved in a high-temperature baghouse. A 5-MWe equivalent demonstration of the technology cosponsored by the U.S. Department of Energy, the Ohio Department of Development/Ohio Coal Development Office and the Electric Power Research Institute has recently been completed at the Ohio Edison R.E. Burger Plant. SNRB incorporates dry sorbent injection for SOx emission control, selective catalytic reduction (SCR) for reducing NOx emissions, and a pulse-jet baghouse operating at 450 to 850 degrees F for controlling particulate emissions. The unique, high-temperature baghouse/catalyst configuration provides for integrated particulate capture, SO2 removal, and NOx reduction as well as the potential for reducing emissions of selected air toxics. The simultaneous, multiple emission control performance of SNRB is summarized using operating data generated in over 2,000 hours, of operation at the demonstration site

  8. High-mobility group box-1 in sterile inflammation.

    Science.gov (United States)

    Tsung, A; Tohme, S; Billiar, T R

    2014-11-01

    High-mobility group box 1 (HMGB1) was originally defined as a ubiquitous nuclear protein, but it was later determined that the protein has different roles both inside and outside of cells. Nuclear HMGB1 regulates chromatin structure and gene transcription, whereas cytosolic HMGB1 is involved in inflammasome activation and autophagy. Extracellular HMGB1 has drawn attention because it can bind to related cell signalling transduction receptors, such as the receptor for advanced glycation end products, Toll-like receptor (TLR)2, TLR4 and TLR9. It also participates in the development and progression of a variety of diseases. HMGB1 is actively secreted by stimulation of the innate immune system, and it is passively released by ischaemia or cell injury. This review focuses on the important role of HMGB1 in the pathogenesis of acute and chronic sterile inflammatory conditions. Strategies that target HMGB1 have been shown to significantly decrease inflammation in several disease models of sterile inflammation, and this may represent a promising clinical approach for treatment of certain conditions associated with sterile inflammation. PMID:24935761

  9. Selective pharmacological targeting of a DEAD box RNA helicase.

    Directory of Open Access Journals (Sweden)

    Lisa Lindqvist

    Full Text Available RNA helicases represent a large family of proteins implicated in many biological processes including ribosome biogenesis, splicing, translation and mRNA degradation. However, these proteins have little substrate specificity, making inhibition of selected helicases a challenging problem. The prototypical DEAD box RNA helicase, eIF4A, works in conjunction with other translation factors to prepare mRNA templates for ribosome recruitment during translation initiation. Herein, we provide insight into the selectivity of a small molecule inhibitor of eIF4A, hippuristanol. This coral-derived natural product binds to amino acids adjacent to, and overlapping with, two conserved motifs present in the carboxy-terminal domain of eIF4A. Mutagenesis of amino acids within this region allowed us to alter the hippuristanol-sensitivity of eIF4A and undertake structure/function studies. Our results provide an understanding into how selective targeting of RNA helicases for pharmacological intervention can be achieved.

  10. Seismic response of skewed RC box-girder bridges

    Institute of Scientific and Technical Information of China (English)

    Ahmed Abdel-Mohti; Gokhan Pekcan

    2008-01-01

    It is critical to ensure the functionality of highway bridges after earthquakes to provide access to important facilities.Since the 1971 San Fernando earthquake,there has been a better understanding of the seismic performance of bridges.Nonetheless,there are no detailed guidelines addressing the performance of skewed highway bridges.Several parameters affect the response of skewed highway bridges under both service and seismic loads which makes their behavior complex.Therefore,there is a need for more research to study the effect of skew angle and other related factors on the performance of highway bridges.This paper examines the seismic performance of a three-span continuous concrete box girder bridge with skew angles from 0 to 60 degrees,analytically.Finite element (FE) and simplified beam-stick (BS) models of the bridge were developed using SAP2000.Different types of analysis were considered on both models such as:nonlinear static pushover,and linear and nonlinear time history analyses.A comparison was conducted between FE and BS,different skew angles,abutment support conditions,and time history and pushover analysis.It is shown that the BS model has the capability to capture the coupling due to skew and the significant modes for moderate skew angles.Boundary conditions and pushover load profile are determined to have a major effect on pushover analysis.Pushover analysis may be used to predict the maximum deformation and hinge formation adequately.

  11. Thinking Inside the Box: Simple Methods to Evaluate Complex Treatments

    Directory of Open Access Journals (Sweden)

    J. Michael Menke

    2011-10-01

    Full Text Available We risk ignoring cheaper and safer medical treatments because they cannot be patented, lack profit potential, require too much patient-contact time, or do not have scientific results. Novel medical treatments may be difficult to evaluate for a variety of reasons such as patient selection bias, the effect of the package of care, or the lack of identifying the active elements of treatment. Whole Systems Research (WSR is an approach designed to assess the performance of complete packages of clinical management. While the WSR method is compelling, there is no standard procedure for WSR, and its implementation may be intimidating. The truth is that WSR methodological tools are neither new nor complicated. There are two sequential steps, or boxes, that guide WSR methodology: establishing system predictability, followed by an audit of system element effectiveness. We describe the implementation of WSR with a particular attention to threats to validity (Shadish, Cook, & Campbell, 2002; Shadish & Heinsman, 1997. DOI: 10.2458/azu_jmmss.v2i1.12365

  12. Corrosion Evaluation of Tank 40 Leak Detection Box

    Energy Technology Data Exchange (ETDEWEB)

    Mickalonis, J.I.

    1999-07-29

    'Leak detection from the transfer lines in the tank farm has been a concern for many years because of the need to minimize exposure of personnel and contamination of the environment. The leak detection box (LDB) is one line of defense, which must be maintained to meet this objective. The evaluation of a failed LDB was one item from an action plan aimed at minimizing the degradation of LDBs. The Tank 40 LDB, which failed in service, was dug up and shipped to SRTC for evaluation. During a video inspection while in service, this LDB was found to have black tubercles on the interior, which suggested possible microbial involvement. The failure point, however, was believed to have occurred in the drain line from the transfer line jacket. Visual, metallurgical, and biological analyses were performed on the LDB. The analysis results showed that there was not any adverse microbiological growth or significant localized corrosion. The corrosion of the LDB was caused by exposure to aqueous environments and was typical of carbon steel pipes in soil environments.'

  13. The Electrical Distribution Feed Box for the LHC Prototype Cell

    CERN Document Server

    Hauviller, Claude; Poncet, Alain; Sacré, P; Trilhe, P

    2000-01-01

    The Electrical Distribution Feed Box (DFB) for the Large Hadron Collider (LHC) Prototype Cell (String 2) is a 6 meter-long 4.6 K / 0.135 MPa liquid helium cryostat which supports and cools 13 kA and 600 A High-Temperature Superconductor (HTS) current leads. These are used for powering the String 2 main dipole and quadrupole superconducting magnets, together with their correctors. The DFB also incorporates the l-plate between its saturated liquid helium bath and the magnet pressurized superfluid helium bath at 1.9 K/ 0.13 MPa. The DFB is built within the frame of a collaboration between CERN and the Budker Institute of Nuclear Physics (Novosibirsk, Russian Federation). It is a complex cryostat satisfying a number of constraints (space available, accessibility, integration) and combining different technologies such as mechanical and electrical engineering, superconductivity, cryogenics and vacuum. The current status of the design and construction of the DFB for the LHC Prototype Cell, together with an outlook t...

  14. The Virtual Solar Observatory: Still a Small Box

    Science.gov (United States)

    Gurman, J. B.; Bogart, R. S.; Davey, A. R.; Dimitoglou, G.; Hill, F.; Hourcle, J. A.; Martens, P. C.; Surez-Sola, I.; Tian, K. Q.; Wampler, S.

    2005-01-01

    Two and a half years after a design study began, and a year and a half after development commenced, version 1.0 of the Virtual Solar Observatory (VSO) was released at the 2004 Fall AGU meeting. Although internal elements of the VSO have changed, the basic design has remained the same, reflecting the team's belief in the importance of a simple, robust mechanism for registering data provider holdings, initiating queries at the appropriate provider sites, aggregating the responses, allowing the user to iterate before making a final selection, and enabling the delivery of data directly from the providers. In order to make the VSO transparent, lightweight, and portable, the developers employed XML for the registry, SOAP for communication between a VSO instance and data services, and HTML for the graphic user interface (GUI's). We discuss the internal data model, the API, and user responses to various trial GUI's as typical design issues for any virtual observatory. We also discuss the role of the "small box" of data search, identification, and delivery services provided by the VSO in the larger, Sun-Solar System Connection virtual observatory (VxO) scheme.

  15. A box model of the Arctic natural variability

    Science.gov (United States)

    Ou, Hsien-Wang

    2013-04-01

    We consider a box model of the Arctic system to examine its natural variability pertaining to the decadal Arctic Oscillation (AO) and the multidecadal Low-Frequency Oscillation (LFO). We distinguish the hierarchical order of the winter over the summer open-areas with only the former perturbing the sea-level pressure to effect coupled balances. From such balances, we discern two feedback loops on the winter open-area: a positive ice-flux feedback that elevates its overall variance and a negative buoyancy feedback that suppresses its low-frequency variance to render a decadal AO peak when subjected to white atmospheric noise. This negative buoyancy feedback may also reproduce observed phasing among LFO signals forced by the AMV (Atlantic Multidecadal Variability), thus resolving some outstanding questions. For the summer open-area, its variance is induced mainly by the winter forcings and insensitive to the base state. Its decadal signal merely reflects the preconditioning winter open-area, but its LFO variance is induced additionally and in comparable measure by the winter SAT (surface air temperature) through the latter's effect on the melt duration and the first-year ice thickness. As such, the summer open-area signal is dominantly multidecadal, which moreover is several times its winter counterpart, consistent with the observed disparity. Although the model is extremely crude, its explicit solution allows quantitative comparison with observations and the generally positive outcome suggests that the model has isolated the essential physics of the Arctic natural variability of our concern.

  16. Growth and morphometrics of the box turtle, Terrapene c. carolina

    Science.gov (United States)

    Stickel, L.F.; Bunck, C.M.

    1989-01-01

    Growth of box turtles in a bottomland forest in Maryland was studied over a period of years (1944-1981). A bivariate analysis of age related growth showed that between 8 and 13 yr, male turtles grew at an average rate of 6.7% per year in carapace length, whereas females grew at 5.3% per year. Both males and females grew considerably more slowly between 14 and 19 years, males at 2.3% per year and females at 3.4% per year. Growth slowed still more in the twenties. Growth in the six other dimensions that were measured provided additional comparisons. Allometric analysis of the different carapace and plastron dimensions showed that among males length increased proportionally more than either width or height and that width increased more than height. Among females, only the greater increase of length than of width was statistically significant. Fully grown males were larger than females in all dimensions except height. Differences from the normal scutal pattern occurred in 16.8% of fully grown males and 18.4% of the females

  17. Gray-Box Modeling of a Pneumatic Servo-Valve

    Directory of Open Access Journals (Sweden)

    Mojtaba Aghamirsalim

    2010-12-01

    Full Text Available This paper presents the evaluation as well as the combined analytical andexperimental identification (gray box identification of a servo-valve torque motor as thedirectional valve applied in a pneumatic actuator. Based on analytical modelling, a simplelinear parametric model with transfer function and block diagram is developed. Next, thestatic and dynamic characteristics of the torque motor are obtained from experimentalobservations. The characteristics confirm the desired linear behaviour of the torque motor.Hence, linearized coefficients from a best curve fitting of static characteristics can bederived. Classical methods of identification are applied on the frequency and stepresponses obtained from a set of tests on the torque motor. Obtained tests results based onparsimony principle and model order of analytical investigations are then implemented toderive the best identified transfer function to describe the performance of the servo-valvetorque motor. Design parameters are estimated with the comparison of the experimentaland analytical models. These parameters can be implemented with acceptable accuracy forservo control studies of pneumatic actuators.

  18. Transuranic and Low-Level Boxed Waste Form Nondestructive Assay Technology Overview and Assessment

    International Nuclear Information System (INIS)

    The Mixed Waste Focus Area (MWFA) identified the need to perform an assessment of the functionality and performance of existing nondestructive assay (NDA) techniques relative to the low-level and transuranic waste inventory packaged in large-volume box-type containers. The primary objectives of this assessment were to: (1) determine the capability of existing boxed waste form NDA technology to comply with applicable waste radiological characterization requirements, (2) determine deficiencies associated with existing boxed waste assay technology implementation strategies, and (3) recommend a path forward for future technology development activities, if required. Based on this assessment, it is recommended that a boxed waste NDA development and demonstration project that expands the existing boxed waste NDA capability to accommodate the indicated deficiency set be implemented. To ensure that technology will be commercially available in a timely fashion, it is recommended this development and demonstration project be directed to the private sector. It is further recommended that the box NDA technology be of an innovative design incorporating sufficient NDA modalities, e.g., passive neutron, gamma, etc., to address the majority of the boxed waste inventory. The overall design should be modular such that subsets of the overall NDA system can be combined in optimal configurations tailored to differing waste types

  19. Parametric Design and Rapid Prototyping of Installation Box for Vehicle Terminal PCB

    Directory of Open Access Journals (Sweden)

    Wang Xingxing

    2016-01-01

    Full Text Available Installation box for vehicle terminal PCB (Printed Circuit Board was took as research object, which is encountered in the process of project developing. Vehicle terminal PCB in actual development process was set as an example, point cloud data were acquired by three coordinate measuring method; Imageware software was used to reconstruct the vehicle terminal PCB model, basic size parameters of vehicle terminal PCB can be got and then design parameters of installation box for vehicle terminal PCB can be determined. Design of the installation box for vehicle terminal PCB was completed based on Solidworks software, then 3D modeling and 2D drawing of installation box for vehicle terminal PCB was gained. Up Plus 2 rapid prototype machine was used to manufacture installation box for vehicle terminal PCB rapidly based on 3D printing technology, then prototype of installation box for vehicle terminal PCB was obtained. It is of certain engineering significant for single (small amount manufacturing of installation box for general PCB.

  20. Co-expression and co-purification of archaeal and eukaryal box C/D RNPs.

    Directory of Open Access Journals (Sweden)

    Yu Peng

    Full Text Available Box C/D ribonucleoprotein particles (RNPs are 2'-O-methylation enzymes required for maturation of ribosomal and small nuclear RNA. Previous biochemical and structural studies of the box C/D RNPs were limited by the unavailability of purified intact RNPs. We developed a bacterial co-expression strategy based on the combined use of a multi-gene expression system and a tRNA-scaffold construct that allowed the expression and purification of homogeneous archaeal and human box C/D RNPs. While the co-expressed and co-purified archaeal box C/D RNP was found to be fully active in a 2'-O-methylation assay, the intact human U14 box C/D RNP showed no detectable catalytic activity, consistent with the earlier findings that assembly of eukaryotic box C/D RNPs is nonspontaneous and requires additional protein factors. Our systems provide a means for further biochemical and structural characterization of box C/D RNPs and their assembly factors.

  1. Genome-wide Analysis of Kelch Repeat-containing F-box Family

    Institute of Scientific and Technical Information of China (English)

    Yujin Sun; Xiaofan Zhou; Hong Ma

    2007-01-01

    The ubiquitin-dependent protein degradation pathway plays diverse roles in eukaryotes. Previous studies indicate that both F-box and Kelch motifs are common in a variety of organisms. F-box proteins are subunits of E3 ubiquitin ligase complexes called SCFs (SKP1, Cullinl, F-box protein, and Rbx1); they have an N-terminal F-box motif that binds to SKP1 (S-phase kinase associated protein), and often have C-terminal protein-protein interaction domains, which specify the protein substrates for degradation via the ubiquitin pathway. One of the most frequently found protein interaction domains in F-box proteins is the Kelch repeat domain. Although both the F-box and Kelch repeats are ancient motifs, Kelch repeats-containing F-box proteins (KFB) have only been reported for human and Arabidopsis previously. The recent sequencing of the rice genome and other plant genomes provides an opportunity to examine the possible evolution history of KFB. We carried out extensive BLAST searches to identify putative KFBs in selected organisms, and analyzed their relationships phylogenetically. We also carried out the analysis of both gene duplication and gene expression of the KFBs in rice and Arabidopsis. Our study indicates that the origin of KFBs occurs before the divergence of animals and plants, and plant KFBs underwent rapid gene duplications.

  2. Design of steel box girder for Taizhou Yangtze River Highway Bridge

    Institute of Scientific and Technical Information of China (English)

    Ding Lei; Shan Hongwei; Zhou Qing; Zheng Benhui

    2011-01-01

    Taizhou Yangtze River Highway Bridge is the first three-pylon two-span suspension bridge in China. The maingirder adopts flat steamline steel closed box girder which has well wind-resistant capability and is technically mature besides beautiful appearance. Straight web plates of the steel box girder in longitudinal direction are proposed in order to ensure the integrity of the steel box girder, and to keep the stress of the steel box girder continuous in the middle pylon,as well as to reduce the gradient of the middle pylon columns. The cross section of the box girder has one box with three cells. Solid-web diaphragm plate with good integrity and high torsional stiffness is adopted. The lifting lugs are utilized in the anchors of suspender cable. In this paper, selection of the cross section of the steel box girder, the general structure design, local structure design and main structure calculation results of Taizhou Yangtze River Bridge are introduced emphatically.

  3. Solar Anomalous and Magnetospheric Particle Explorer attitude control electronics box design and performance

    Science.gov (United States)

    Chamberlin, K.; Clagett, C.; Correll, T.; Gruner, T.; Quinn, T.; Shiflett, L.; Schnurr, R.; Wennersten, M.; Frederick, M.; Fox, S. M.

    1993-01-01

    The attitude Control Electronics (ACE) Box is the center of the Attitude Control Subsystem (ACS) for the Solar Anomalous and Magnetospheric Particle Explorer (SAMPEX) satellite. This unit is the single point interface for all of the Attitude Control Subsystem (ACS) related sensors and actuators. Commands and telemetry between the SAMPEX flight computer and the ACE Box are routed via a MIL-STD-1773 bus interface, through the use of an 80C85 processor. The ACE Box consists of the flowing electronic elements: power supply, momentum wheel driver, electromagnet driver, coarse sun sensor interface, digital sun sensor interface, magnetometer interface, and satellite computer interface. In addition, the ACE Box also contains an independent Safehold electronics package capable of keeping the satellite pitch axis pointing towards the sun. The ACE Box has dimensions of 24 x 31 x 8 cm, a mass of 4.3 kg, and an average power consumption of 10.5 W. This set of electronics was completely designed, developed, integrated, and tested by personnel at NASA GSFC. SAMPEX was launched on July 3, 1992, and the initial attitude acquisition was successfully accomplished via the analog Safehold electronics in the ACE Box. This acquisition scenario removed the excess body rates via magnetic control and precessed the satellite pitch axis to within 10 deg of the sun line. The performance of the SAMPEX ACS in general and the ACE Box in particular has been quite satisfactory.

  4. Regulating the ethylene response of a plant by modulation of F-box proteins

    Science.gov (United States)

    Guo, Hongwei [Beijing, CN; Ecker, Joseph R [Carlsbad, CA

    2014-01-07

    The relationship between F-box proteins and proteins invovled in the ethylene response in plants is described. In particular, F-box proteins may bind to proteins involved in the ethylene response and target them for degradation by the ubiquitin/proteasome pathway. The transcription factor EIN3 is a key transcription factor mediating ethylne-regulated gene expression and morphological responses. EIN3 is degraded through a ubiquitin/proteasome pathway mediated by F-box proteins EBF1 and EBF2. The link between F-box proteins and the ethylene response is a key step in modulating or regulating the response of a plant to ethylene. Described herein are transgenic plants having an altered sensitivity to ethylene, and methods for making transgenic plant haing an althered sensitivity to ethylene by modulating the level of activity of F-box proteins. Methods of altering the ethylene response in a plant by modulating the activity or expression of an F-box protein are described. Also described are methods of identifying compounds that modulate the ethylene response in plants by modulating the level of F-box protein expression or activity.

  5. Design and test of box girder for a large wind turbine blade

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Per H.; Tesauro, A.; Bitsche, R. [Technical Univ. of Denmark. DTU Wind Energy, DTU Risoe Campus, Roskilde (Denmark)] [and others

    2012-09-15

    This report is covering the structural design and full scale test of a box girder as a part of the project ''Demonstration of new blade design using manufacturing process simulations'' supported by the EUDP program. A box girder with a predetermined outer geometry was designed using new inventions, which create an inner structure in the box girder. With a combination of advanced FEM analysis and the inventions it was possible to reduce the material thickness of the cap by up to 40%. The new design of the box girder was manufactured at SSP Technology A/S, where it was demonstrated that the manufacturing process could include the new inventions. Subsequently the box girder was transported to the blade test facility at DTU Wind Energy. A series of test was performed with the blade to investigate the behaviour during loading, and finally the girder was loaded to ultimate failure. The report includes the description of the test setup, the test and an overview over the results from the test performed on the box girder. During the final test the box girder failed at 58 % of the expected ultimate load. Unfortunately, no definite conclusion could be made concerning the failure mechanism. (Author)

  6. Loss of Hda activity stimulates replication initiation from I-box, but not R4 mutant origins in Escherichia coli

    DEFF Research Database (Denmark)

    Riber, Leise; Fujimitsu, K.; Katayama, T.;

    2009-01-01

    Initiation of chromosome replication in Escherichia coli is limited by the initiator protein DnaA associated with ATP. Within the replication origin, binding sites for DnaA associated with ATP or ADP (R boxes) and the DnaA(ATP) specific sites (I-boxes, tau-boxes and 6-mer sites) are found. We...

  7. 76 FR 11511 - In the Matter of Certain Set-Top Boxes, and Hardware and Software Components Thereof; Notice of...

    Science.gov (United States)

    2011-03-02

    ... COMMISSION In the Matter of Certain Set-Top Boxes, and Hardware and Software Components Thereof; Notice of... States after importation of certain set-top boxes, and hardware and software components thereof by reason... importation of certain set-top boxes, and hardware and software components thereof that infringe one or...

  8. Using Object Boxes to Teach the Form, Function, and Vocabulary of the Parts of the Human Eye

    Science.gov (United States)

    Rule, Audrey C.; Welch, Genne

    2008-01-01

    These science activities for elementary students focus on the external structures and functions of the human eye with hands-on object box activities based on the Montessori theory (1966) of concrete learning through manipulation of objects and focus of attention through touch. Object boxes are sets of items and corresponding cards housed in a box.…

  9. The Noise-Reducing Performance of BOX-IN Construction for Converter Transformer%换流变压器BOX-IN结构的降噪性能

    Institute of Scientific and Technical Information of China (English)

    黄莹; 黎小林; 李志远; 朱功辉; 白宇

    2011-01-01

    To control the noise of converter transformer is a key to reduce the audible noise at the boundary of the HVDC substation,and it is hard for the usual noise barrier to control the noise at the range of a long distance from substation.The paper researches the noise-reducing performance of BOX-IN construction for converter transformer with Sound Plan software and noise test in field,indicating that the BOX-IN construction is better than the noise barrier,especially at the range of a long distance from substation,and has a good performance to reduce the main noise at 400 Hz level from the converter transformer.%控制换流变压器的噪声是降低换流站周围厂界噪声的关键,常用的声屏障难于实现在远离换流站处的噪声控制。对BOX-IN隔声结构的隔声性能采用SoundPLAN软件和实际测试进行了研究,结果表明:BOX-IN结构的降噪性能优于声屏障,尤其是在远离换流站处;对于换流变压器400 Hz主要噪音,BOX-IN的隔声效果很好。

  10. [Prognosis of affinity change of the TATA-binding protein to TATA-boxes upon polymorphisms of the human gene promoter TATA boxes].

    Science.gov (United States)

    Ponomarenko, P M; Ponomarenko, M P; Drachkova, I A; Lysova, M V; Arshinova, T V; Savinkova, L K; Kolchanov, N A

    2009-01-01

    TATA-binding protein (TBP) is a subunit of basal transcription factor TFIID that recognizes and binds to the TATA-box on TATA-containing promoters of class II genes, and starts assembling RNA polymerase II basal transcription complex. It is shown in many works that the sequence of TATA-box with its flanking regions affects the level of basal and activated transcription. TATA-box polymorphisms and human hereditary diseases associated with them show that TBP/TATA interaction may indirectly affect gene regulation in vivo. The object of this work is to determine changes in the TBP/TATA affinity upon polymorphisms in TATA-boxes of human gene promoters. We assess changes in TBP/TATA affinities in silico by using our formula of equilibrium TBP/TATA binding upon four consecutive steps: nonspecific binding sliding braking (stopping) stabilization. Our prognoses agree with known examples of TATA-box polymorphisms and human hereditary diseases associated with them. PMID:19548537

  11. Study of Randomness in AES Ciphertexts Produced by Randomly Generated S-Boxes and S-Boxes with Various Modulus and Additive Constant Polynomials

    Science.gov (United States)

    Das, Suman; Sadique Uz Zaman, J. K. M.; Ghosh, Ranjan

    2016-06-01

    In Advanced Encryption Standard (AES), the standard S-Box is conventionally generated by using a particular irreducible polynomial {11B} in GF(28) as the modulus and a particular additive constant polynomial {63} in GF(2), though it can be generated by many other polynomials. In this paper, it has been shown that it is possible to generate secured AES S-Boxes by using some other selected modulus and additive polynomials and also can be generated randomly, using a PRNG like BBS. A comparative study has been made on the randomness of corresponding AES ciphertexts generated, using these S-Boxes, by the NIST Test Suite coded for this paper. It has been found that besides using the standard one, other moduli and additive constants are also able to generate equally or better random ciphertexts; the same is true for random S-Boxes also. As these new types of S-Boxes are user-defined, hence unknown, they are able to prevent linear and differential cryptanalysis. Moreover, they act as additional key-inputs to AES, thus increasing the key-space.

  12. Streptococcus pneumoniae Genome-wide Identification and Characterization of BOX Element-binding Domains.

    Science.gov (United States)

    Zhang, Qiao; Wang, Changzheng; Wan, Min; Wu, Yin; Ma, Qianli

    2015-11-01

    The BOX elements are short repetitive DNA sequences that distribute randomly in intergenic regions of the Streptococcus pneumoniae genome. The function and origin of such elements are still unknown, but they were found to modulate expression of neighboring genes. Evidences suggested that the modulation's mechanism can be fulfilled by sequence-specific interaction of BOX elements with transcription factor family proteins. However, the type and function of these BOX-binding proteins still remain largely unexplored to date. In the current study we described a synthetic protocol to investigate the recognition and interaction between a highly conserved site of BOX elements and the DNA-binding domains of a variety of putative transcription factors in the pneumococcal genome. With the protocol we were able to predict those high-affinity domain binders of the conserved BOX DNA site (BOX DNA) in a high-throughput manner, and analyzed sequence-specific interaction in the domainDNA recognition at molecular level. Consequently, a number of putative transcription factor domains with both high affinity and specificity for the BOX DNA were identified, from which the helix-turn-helix (HTH) motif of a small heat shock factor was selected as a case study and tested for its binding capability toward the double-stranded BOX DNA using fluorescence anisotropy analysis. As might be expected, a relatively high affinity was detected for the interaction of HTH motif with BOX DNA with dissociation constant at nanomolar level. Molecular dynamics simulation, atomic structure examination and binding energy analysis revealed a complicated network of intensive nonbonded interactions across the complex interface, which confers both stability and specificity for the complex architecture. PMID:27491035

  13. Transcriptional regulation of the human H ferritin-encoding gene (FERH) in G418-treated cells: role of the B-box-binding factor.

    Science.gov (United States)

    Bevilacqua, M A; Faniello, M C; Russo, T; Cimino, F; Costanzo, F

    1994-04-20

    We have analysed the molecular basis underlying the increase in ferritin heavy-chain mRNA (FERH) levels in cells exposed to the antibiotic Geneticin (G418). Transient transfection experiments demonstrate that this increase is paralleled by an enhanced transcription driven by the promoter (pFERH) for the human FERH gene, in which the most proximal promoter element (B-box) appears to play a key role. This region is conserved in human and rat, and binds an unknown factor. The DNA-protein complex composed of B-box-binding factor and its cis-element becomes more abundant in the G418-treated cells, as compared with the untreated ones. PMID:8163204

  14. 'When you're boxing you don't think so much': Pugilism, transitional masculinities and criminal desistance among young Danish gang members

    DEFF Research Database (Denmark)

    Deuchar, Ross; Søgaard, Thomas Friis; Kolind, Torsten;

    2016-01-01

    This paper draws upon international research evidence that suggests a relationship between protest masculinity and the manifestation of violent crime among young males, and that criminal desistance may be linked to (inter-) subjective processes such as the reconstruction of masculine identity....... The paper considers the potential that pugilism (the art and practice of boxing) may have on enabling young, disadvantaged minority male gang members to find avenues for alternative identity construction and to gain transitional experiences which trigger self-confessed desistance actions. Drawing upon...... an ethnographic study conducted in a boxing rehabilitation centre on the outskirts of Copenhagen, Denmark, the paper reports on data gleaned from participant observation and qualitative interviews with 22 ethnic minority young men. Findings suggest that the masculine context within the rehabilitation programme...

  15. Background Studies for the MINER Coherent Neutrino Scattering Reactor Experiment

    CERN Document Server

    Agnolet, G; Barker, D; Beck, R; Carroll, T J; Cesar, J; Cushman, P; Dent, J B; De Rijck, S; Dutta, B; Flanagan, W; Fritts, M; Gao, Y; Harris, H R; Hays, C C; Iyer, V; Jastram, A; Kadribasic, F; Kennedy, A; Kubik, A; Ogawa, I; Lang, K; Mahapatra, R; Mandic, V; Martin, R D; Mast, N; McDeavitt, S; Mirabolfathi, N; Mohanty, B; Nakajima, K; Newhouse, J; Newstead, J L; Phan, D; Proga, M; Roberts, A; Rogachev, G; Salazar, R; Sander, J; Senapati, K; Shimada, M; Strigari, L; Tamagawa, Y; Teizer, W; Vermaak, J I C; Villano, A N; Walker, J; Webb, B; Wetzel, Z; Yadavalli, S A

    2016-01-01

    The proposed Mitchell Institute Neutrino Experiment at Reactor (MINER) experiment at the Nuclear Science Center at Texas A&M University will search for coherent elastic neutrino-nucleus scattering within close proximity (about 2 meters) of a 1 MW TRIGA nuclear reactor core using low threshold, cryogenic germanium and silicon detectors. Given the Standard Model cross section of the scattering process and the proposed experimental proximity to the reactor, as many as 5 to 20 events/kg/day are expected. We discuss the status of preliminary measurements to characterize the main backgrounds for the proposed experiment. Both in situ measurements at the experimental site and simulations using the MCNP and GEANT4 codes are described. A strategy for monitoring backgrounds during data taking is briefly discussed.

  16. Experimental Investigation of the Internal Flow Field of Rotating Impeller Passage with Inlet Box

    Institute of Scientific and Technical Information of China (English)

    WuKeqi; HuShengli

    1995-01-01

    Using PDA and its measurement system.the flow fields at the different peripheral locations of rotating impeller passage of a diagonal fan with inlet box are measured.The results are compared with the flow field of the rotating impeller passage of the same fan without inlet box.The differences of the flow characteristics of the rotating passage at the different peripheral locations are revealed.The effects of the complex flow in the inlet box on the internal folw of the rotaing impell passage are investigated.

  17. Real-time geometric scene estimation for RGBD images using a 3D box shape grammar

    Science.gov (United States)

    Willis, Andrew R.; Brink, Kevin M.

    2016-06-01

    This article describes a novel real-time algorithm for the purpose of extracting box-like structures from RGBD image data. In contrast to conventional approaches, the proposed algorithm includes two novel attributes: (1) it divides the geometric estimation procedure into subroutines having atomic incremental computational costs, and (2) it uses a generative "Block World" perceptual model that infers both concave and convex box elements from detection of primitive box substructures. The end result is an efficient geometry processing engine suitable for use in real-time embedded systems such as those on an UAVs where it is intended to be an integral component for robotic navigation and mapping applications.

  18. Gear-box fault detection using time-frequency based methods

    DEFF Research Database (Denmark)

    Odgaard, Peter Fogh; Stoustrup, Jakob

    2015-01-01

    Gear-box fault monitoring and detection is important for optimization of power generation and availability of wind turbines. The current industrial approach is to use condition monitoring systems, which runs in parallel with the wind turbine control system, using expensive additional sensors...... in the gear-box resonance frequency can be detected. Two different time–frequency based approaches are presented in this paper. One is a filter based approach and the other is based on a Karhunen–Loeve basis. Both of them detect the gear-box fault with an acceptable detection delay of maximum 100s, which...

  19. Prediction and experimental verification of performance of box type solar cooker - Part I. Cooking vessel with central cylindrical cavity

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, Avala Raji [Department of Mechanical Engineering, Kakatiya Institute of Technology and Science, Warangal 506 015, AP (India); Rao, A.V. Narasimha [Department of Mechanical Engineering, National Institute of Technology, Warangal 506 004, AP (India)

    2007-07-15

    The performance of conventional box type solar cookers can be improved by better designs of cooking vessels with proper understanding of the heat flow to the material to be cooked. An attempt has been made in this article to arrive at a mathematical model to understand the heat flow process to the cooking vessel and thereby to the food material. The mathematical model considers a double glazed hot box type solar cooker loaded with two different types of vessels, kept either on the floor of the cooker or on lugs. The performance of the cooking vessel with a central cylindrical cavity is compared with that of a conventional cylindrical cooking vessel. It is found from the experiments and modeling that the cooking vessel with a central cylindrical cavity on lugs results in a higher temperature of the thermic fluid than that of a conventional vessel on the floor or on lugs. The average improvement of performance of the vessel with a central cylindrical cavity kept on lugs is found to be 5.9% and 2.4% more than that of a conventional cylindrical vessel on the floor and on lugs, respectively. (author)

  20. Identification and characterization of a nuclear localization signal of TRIM28 that overlaps with the HP1 box

    International Nuclear Information System (INIS)

    Tripartite motif-containing 28 (TRIM28) is a transcription regulator, which forms a repressor complex containing heterochromatin protein 1 (HP1). Here, we report identification of a nuclear localization signal (NLS) within the 462-494 amino acid region of TRIM28 that overlaps with its HP1 binding site, HP1 box. GST-pulldown experiments revealed the interaction of the arginine-rich TRIM28 NLS with various importin α subtypes (α1, α2 and α4). In vitro transport assay demonstrated that nuclear localization of GFP-TRIM28 NLS is mediated by importin αs, in conjunction with importin β1 and Ran. Further, we demonstrated that HP1 and importin αs compete for binding to TRIM28. Together, our findings suggest that importin α has an essential role in the nuclear delivery and preferential HP1 interaction of TRIM28. - Highlights: • TRIM28 contains an NLS within the 462-494 amino acid region. • The nuclear import of TRIM28 is mediated by importin α/importin β1. • TRIM28 NLS overlaps with HP1 Box. • HP1 and importin α compete for binding to TRIM28